<?xml version="1.0" encoding="utf-8"?>
<posts>
  <row Id="1" PostTypeId="1" AcceptedAnswerId="12" CreationDate="2015-06-30T16:59:11.437" Score="25" ViewCount="40329" Body="&lt;p&gt;In elementary OS, as with Ubuntu and Mac OS X, the close button is on the left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/s0XJB.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I change this to have the close button on the right?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-07-19T21:56:35.870" LastActivityDate="2018-11-18T21:53:35.550" Title="Can I swap the close buttons from the left to the right?" Tags="|navigation|window-management|user-interface|" AnswerCount="5" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2" PostTypeId="2" ParentId="1" CreationDate="2015-06-30T17:06:43.520" Score="15" Body="&lt;p&gt;Yes you can. First you need to install &lt;code&gt;dconf-editor&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once it is installed, open it and search for the entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org/pantheon/desktop/gala/appearance/button-layout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There you'll see the dafault setting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;close:maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can switch those as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;maximize:close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to have the close button to the right. You probably need to restart or log off and back in for the changes to take effect.&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2015-06-30T17:06:43.520" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3" PostTypeId="1" AcceptedAnswerId="4" CreationDate="2015-06-30T17:07:22.857" Score="14" ViewCount="27460" Body="&lt;p&gt;I have inserted the CD and navigated to it in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I run &lt;code&gt;./autorun.sh&lt;/code&gt; it doesn't give any useful output, and it doesn't appear to have installed.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="45" LastEditDate="2015-08-04T22:14:34.500" LastActivityDate="2017-01-30T14:56:43.710" Title="How can I install VBox Guest Additions?" Tags="|command-line|virtualization|virtualbox|" AnswerCount="3" CommentCount="0" ClosedDate="2015-08-03T11:01:51.010" ContentLicense="CC BY-SA 3.0" />
  <row Id="4" PostTypeId="2" ParentId="3" CreationDate="2015-06-30T17:07:22.857" Score="10" Body="&lt;p&gt;You need to run &lt;code&gt;VBoxLinuxAdditions.run&lt;/code&gt; as root, not &lt;code&gt;autorun.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you've inserted the Guest Additions ISO, open Files and open the disc from the sidebar. Then, right-click in the background of the window where &lt;code&gt;autorun.sh&lt;/code&gt; is and select &lt;code&gt;Open in &amp;gt; Terminal&lt;/code&gt;. Now you can run the following command to install Guest Additions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ./VboxLinuxAdditions.run&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For reference, here is example output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Verifying archive integrity... All good.&#xA;Uncompressing VirtualBox 4.3.28 Guest Additions for Linux............&#xA;VirtualBox Guest Additions installer&#xA;Copying additional installer modules ...&#xA;Installing additional modules ...&#xA;Removing existing VirtualBox DKMS kernel modules ...done.&#xA;Removing existing VirtualBox non-DKMS kernel modules ...done.&#xA;Building the VirtualBox Guest Additions kernel modules ...done.&#xA;Doing non-kernel setup of the Guest Additions ...done.&#xA;Starting the VirtualBox Guest Additions ...done.&#xA;Installing the Window System drivers&#xA;Installing X.Org Server 1.16 modules ...done.&#xA;Setting up the Window System to use the Guest Additions ...done.&#xA;You may need to restart the the Window System (or just restart the guest system)&#xA;to enable the Guest Additions.&#xA;&#xA;Installing graphics libraries and desktop services components ...done.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditDate="2017-01-30T14:56:43.710" LastActivityDate="2017-01-30T14:56:43.710" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5" PostTypeId="1" AcceptedAnswerId="6" CreationDate="2015-06-30T17:20:14.120" Score="6" ViewCount="2767" Body="&lt;p&gt;Whenever I try to install &lt;code&gt;dconf-tool&lt;/code&gt; I get this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package dconf-tools is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;However the following packages replace it:&#xA;  dconf-cli&#xA;&#xA;E: Package 'dconf-tools' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Why and how can I fix this? &lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="16827" LastEditDate="2019-04-30T15:48:03.920" LastActivityDate="2019-04-30T15:48:03.920" Title="Why can I not install dconf-tools?" Tags="|software-installation|appcenter|apt|dconf|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="6" PostTypeId="2" ParentId="5" CreationDate="2015-06-30T17:20:14.120" Score="4" Body="&lt;p&gt;For me, my universe source was disabled. To enable it, open Software Centre and navigate to Dconf Editor (you will have to search).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will say &quot;Available in the Universe repository&quot;, and you can click to enable it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It takes a minute or so, and then you can install from software centre or from terminal.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-06-30T17:20:14.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7" PostTypeId="2" ParentId="1" CreationDate="2015-06-30T17:22:17.980" Score="6" Body="&lt;p&gt;You could also install elementary-tweaks&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open switchboard-&gt;Tweaks and change the window buttons there.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-06-30T17:22:17.980" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8" PostTypeId="2" ParentId="1" CreationDate="2015-06-30T17:23:42.833" Score="1" Body="&lt;p&gt;Alternatively you can use elementary tweaks (not officially supported but easier to use). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add Ken Hartley's ppa:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:justsomedood/justsomeelementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Don't forget to update  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally install elementary-tweaks  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Access elementary tweaks through System Settings (You will have to restart it if you had it open during installation).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;code&gt;General &amp;gt; Appearance&lt;/code&gt; tab, the option &lt;code&gt;Window Controls&lt;/code&gt; should allow you to change the close button to the right.&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorDisplayName="user3" LastEditDate="2015-06-30T17:27:31.750" LastActivityDate="2015-06-30T17:27:31.750" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9" PostTypeId="1" CreationDate="2015-06-30T17:26:49.357" Score="29" ViewCount="30961" Body="&lt;p&gt;By default, elementary OS doesn't have a desktop folder - and no files can be placed onto the wallpaper. Note that this isn't just that icons don't show, there really is no desktop folder:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cSD7A.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where should I store my files and folders which I normally have on my desktop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where can I place links to start my custom applications?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I'd still like to have an Ubuntu or Windows-like desktop, is it possible to add this feature? If so, how?&lt;/p&gt;&#xA;" OwnerUserId="27" LastEditorUserId="4185" LastEditDate="2016-06-21T07:59:40.567" LastActivityDate="2020-03-26T09:12:06.560" Title="Why can't I place files on the desktop by default, and how can I get this feature?" Tags="|desktop|files|user-interface|navigation|" AnswerCount="6" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10" PostTypeId="1" AcceptedAnswerId="13" CreationDate="2015-06-30T17:42:53.633" Score="12" ViewCount="26004" Body="&lt;p&gt;The &lt;a href=&quot;https://01.org/linuxgraphics/blogs/thac0/2015/released-intelr-graphics-installer-1.1.0-linux&quot; rel=&quot;nofollow&quot;&gt;intel graphics installer&lt;/a&gt; seems to be compatible with Ubuntu 14.10, and it wont detect elementary OS freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the best way to install these drivers?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on a mac mini late 2012 with a Intel HD Graphics 4000&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT-- I would like ta add this bonus question because I think it can be useful. How can I clean my system from any earlier attempt to install such drivers? How can I safely go back to same drivers used on a fresh install?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="3757" LastEditDate="2016-05-04T07:56:15.070" LastActivityDate="2016-05-04T07:56:15.070" Title="How can I install Intel HD Graphics proprietary drivers on elementary OS?" Tags="|graphic-drivers|" AnswerCount="3" CommentCount="0" ClosedDate="2015-09-30T21:33:02.333" ContentLicense="CC BY-SA 3.0" />
  <row Id="11" PostTypeId="2" ParentId="10" CreationDate="2015-06-30T18:00:42.770" Score="3" Body="&lt;p&gt;First download one the installer &lt;a href=&quot;https://01.org/linuxgraphics/downloads&quot; rel=&quot;nofollow&quot;&gt;from this page&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installer uses the file found in &lt;code&gt;/etc/lsb-release&lt;/code&gt; to verify your distribution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This file is something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_RELEASE=0.3&#xA;DISTRIB_CODENAME=freya&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS Freya&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So you should replace this file with one from Ubuntu 14.04. Login as root and replace the content with below lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=Ubuntu&#xA;DISTRIB_RELEASE=14.04&#xA;DISTRIB_CODENAME=trusty&#xA;DISTRIB_DESCRIPTION=&quot;Ubuntu Trusty Tahr&quot;  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can now run your Intel Graphics Installer.(It works with my Intel 4400)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure to change it back afterwards.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="47" LastEditDate="2015-06-30T18:11:31.247" LastActivityDate="2015-06-30T18:11:31.247" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12" PostTypeId="2" ParentId="1" CreationDate="2015-06-30T18:02:46.540" Score="37" Body="&lt;p&gt;Here is another approach without installing any additional software.&#xA;Open a terminal session and run one of the following commands:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Default Button Style&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close:maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9DlQ6.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Max and Close buttons switched&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout maximize:close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KDBIq.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Windows Button Style&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LH4iP.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Mac OS X Button Style&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close,minimize,maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/QxvEn.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to logout and login or restart to make the changes take effect.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-07-12T20:51:12.683" LastActivityDate="2015-07-12T20:51:12.683" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13" PostTypeId="2" ParentId="10" CreationDate="2015-06-30T18:03:15.703" Score="9" Body="&lt;p&gt;There are a couple of ways to achieve it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Via &lt;a href=&quot;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;Oibaf ppa&lt;/a&gt;, which is widely used among Ubuntu based distribution users. I use it myself, and everything works fine, except for a minor bug where for some reason &lt;code&gt;libgbm1&lt;/code&gt; is always stopped when updating the system.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Based on &lt;a href=&quot;http://www.webupd8.org/2013/04/how-to-use-intel-linux-graphics-drivers.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; WebUp8 article, you can manually add repository for Ubuntu 14.04&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://download.01.org/gfx/ubuntu/14.04/main saucy main #Intel Graphics drivers&quot; | sudo tee /etc/apt/sources.list.d/intellinuxgraphics.list&#xA;&#xA;wget --no-check-certificate https://download.01.org/gfx/RPM-GPG-KEY-ilg -O - | sudo apt-key add -&#xA;&#xA;wget --no-check-certificate https://download.01.org/gfx/RPM-GPG-KEY-ilg-2 -O - | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Third way is in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/11/3&quot;&gt;Saeed's answer&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="49" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-06-30T18:07:10.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14" PostTypeId="2" ParentId="9" CreationDate="2015-06-30T18:05:10.350" Score="4" Body="&lt;p&gt;That option is not available by default because it goes against the design behind elementary OS - that it's a clean and well designed environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications should be started by using Slingshot. Press &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt; or &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; and enter the first letters of the application you want to start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can use &lt;code&gt;kupfer&lt;/code&gt; or &lt;code&gt;synapse&lt;/code&gt; for that purpose. &lt;code&gt;.desktop&lt;/code&gt; files are saved in your home folder under &lt;code&gt;.local/share/applications/&lt;/code&gt; and globally in &lt;code&gt;/usr/local/share/applications&lt;/code&gt; if you want to edit the entries that appear in these launchers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you edit them, copy to the home area one and then edit. This will prevent program updates overwriting your changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The recommended directory for your documents is the &lt;code&gt;Documents&lt;/code&gt; folder in your home directory.&lt;/p&gt;&#xA;" OwnerUserId="25" LastEditorDisplayName="user3" LastEditDate="2015-07-09T10:13:57.157" LastActivityDate="2015-07-09T10:13:57.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15" PostTypeId="2" ParentId="9" CreationDate="2015-06-30T18:05:21.503" Score="40" Body="&lt;p&gt;elementary tends to take a perspective of &quot;why?&quot; rather than &quot;why not?&quot;. Coding and supporting a feature like placing an icon view over the wallpaper takes time to design, code, test, etc. This would be a significant time investment and they don't currently feel that this feature is more important than the others they are working on. It also carries performance implications as this would be another process constantly running in the background whether in use or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideally files are stored in their respective directories in your Home (Music, Videos, Downloads, etc). However your Home directory is also available as a staging area. The assumption is that file management happens in the file manager app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quick launching of apps happens in the dock. You can drag and drop any app from the Applications menu to the dock or right click any running app and select &quot;Keep in Dock&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd still like to install a piece of software to place icons on the desktop, it is possible. Typically this feature is provided by a file manager. Popular alternatives include Nautilus (GNOME Files) and Nemo. Both are available to install from the Software Center. Quassy's answer includes more in-depth information about installation, configuration, and setting up auto-run.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-11T01:01:50.377" LastActivityDate="2015-07-11T01:01:50.377" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="16" PostTypeId="1" AcceptedAnswerId="22" CreationDate="2015-06-30T18:25:27.203" Score="9" ViewCount="2088" Body="&lt;p&gt;I have a Lenovo Helix with Windows installed. I want to install elementary OS along side it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched this subject and get different responses and to be honest I don't really understand what I'm reading.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the correct way to prepare my machine for dual booting?&lt;/p&gt;&#xA;" OwnerUserId="59" LastEditorDisplayName="user3" LastEditDate="2015-07-08T12:51:04.577" LastActivityDate="2016-11-22T18:34:50.473" Title="Prepare for dual-booting with Windows" Tags="|system-installation|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="17" PostTypeId="1" AcceptedAnswerId="3058" CreationDate="2015-06-30T18:36:18.867" Score="12" ViewCount="3770" Body="&lt;p&gt;Can I expect that a PPA will work the same way it would on a Ubuntu installation?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I know that a PPA that works on Ubuntu might not work on elementary?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="68" LastEditDate="2015-08-30T19:38:56.053" LastActivityDate="2015-11-19T15:00:37.627" Title="Can I safely install any PPA for Ubuntu on elementary?" Tags="|ppa|ubuntu|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="18" PostTypeId="1" AcceptedAnswerId="20" CreationDate="2015-06-30T18:39:48.957" Score="47" ViewCount="12505" Body="&lt;p&gt;I have a Google Chrome icon in Plank. After an update to Google Chrome, a second fuzzy icon appears every time the browser is opened:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SeEOU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-10-01T23:16:48.120" LastActivityDate="2016-03-16T13:42:52.653" Title="One of my apps has a second, fuzzy icon in Plank. How can I workaround this?" Tags="|applications|plank|icons|google-chrome|" AnswerCount="7" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="19" PostTypeId="2" ParentId="17" CreationDate="2015-06-30T18:41:51.343" Score="16" Body="&lt;p&gt;PPAs are inherently unsafe. By adding a PPA, you are giving a 3rd party the ability to distribute/replace &lt;strong&gt;any&lt;/strong&gt; package (including important security-related system packages), and consequently the equivalent of administrator privileges. You should only add PPAs of developers you know to be trustworthy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, theoretically PPAs that target Ubuntu 14.04 (Trusty) may be compatible with elementary OS Freya. However, there's no real way to know other than by trying it (or if the distributor states that it is compatible), and some differences between elementary OS and Ubuntu could cause issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One difference, for example, is the version of GTK+ (Ubuntu 14.04 uses 3.10, elementary OS Freya uses 3.14). elementary OS also includes several newer or patched packages; for a complete list, see the &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/os-patches?field.series_filter=trusty&quot; rel=&quot;nofollow&quot;&gt;os-patches PPA&lt;/a&gt; on Launchpad. &lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="308" LastEditorDisplayName="user3" LastEditDate="2015-08-30T21:27:32.840" LastActivityDate="2015-08-30T21:27:32.840" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="20" PostTypeId="2" ParentId="18" CreationDate="2015-06-30T18:45:34.497" Score="46" Body="&lt;p&gt;&lt;strong&gt;Edit Oct 14th, 2015&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently this issue is fixed in Google Chrome v46. If you are still experiencing it, try upgrading Chrome.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To fix this issue, you can follow the steps outlined in &lt;a href=&quot;http://kb.openstudioproject.com/content/fix-double-google-chrome-icon-docky-and-plank&quot;&gt;this post&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make a copy of the .desktop file of Google Chrome to your user's local applications folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/google-chrome.desktop ~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the copied .desktop file with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/applications/google-chrome.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once the file opens, paste the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;StartupWMClass=Google-chrome-stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;somewhere for each of the three sections in the file: &lt;code&gt;[Desktop Entry]&lt;/code&gt;, &lt;code&gt;[NewWindow Shortcut Group]&lt;/code&gt; and &lt;code&gt;[NewIncognito Shortcut Group]&lt;/code&gt; (for example, at the end of each section).&lt;sup&gt;1&lt;/sup&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save and close the file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Remove the Google Chrome launcher from &lt;code&gt;Plank&lt;/code&gt; (unselect &lt;code&gt;Keep in dock&lt;/code&gt;, if it's checked), and open the browser using the &lt;code&gt;Slingshot&lt;/code&gt; launcher.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;code&gt;Keep in dock&lt;/code&gt; for the new Google Chrome icon that appears in Plank (should appear &lt;em&gt;not&lt;/em&gt; fuzzy).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;1&lt;/sup&gt; If you are fixing this for a different program, you can find out which &lt;code&gt;WM_CLASS&lt;/code&gt; your window has got when you type in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xprop WM_CLASS&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then click on the window. In case of Google Chrome the output is as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WM_CLASS(STRING) = &quot;Google-chrome-stable&quot;, &quot;Google-chrome-stable&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For a different application it will be different, so the line to add will be  like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    StartupWMClass=Name-of-application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After adding the line, be sure you &lt;strong&gt;removed the previous launcher&lt;/strong&gt;  then &lt;strong&gt;start the application and right clicking on its dock icon check 'Keep in dock'&lt;/strong&gt;: just dragging &amp;amp; dropping the &lt;code&gt;.desktop&lt;/code&gt; file onto the dock may still lead to a second launcher/icon appearing in the dock.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorDisplayName="user170" LastEditDate="2016-03-16T10:27:37.617" LastActivityDate="2016-03-16T10:27:37.617" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="21" PostTypeId="2" ParentId="9" CreationDate="2015-06-30T18:46:25.740" Score="34" Body="&lt;p&gt;While Daniel Foré adequately explains the design decision, it does not answer the actual question. You can get the old desktop paradigm back by installing the &lt;em&gt;Nautilus&lt;/em&gt; file manager (part of the GNOME project). Also Nautilus will appear inside Slingshot as a second, alternative file manger to &lt;em&gt;Files&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Nautilus without all the related GNOME packages and dconf-editor, by running the following command in terminal: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --no-install-recommends nautilus dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit the following config entries by running &lt;code&gt;dconf-editor&lt;/code&gt; in terminal or starting dconf-editor from Slingshot: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.nautilus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check entries you'd like to see on the desktop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.pantheon.desktop.cerbere&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;nautilus -n&lt;/code&gt; so the entry should look somewhat like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;['wingpanel', 'plank', 'slingshot-launcher --silent', 'nautilus -n']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run &lt;code&gt;nautilus -n&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.desktop.background&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tick the show-desktop-icons box &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Based on the blog post &lt;a href=&quot;http://mylinuxideas.blogspot.in/2015/04/enable-desktop-icons-and-right-click-on.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;Enable desktop icons and right click on Elementary Freya OS.&quot;&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="308" LastEditorDisplayName="user3" LastEditDate="2019-12-06T06:50:24.283" LastActivityDate="2019-12-06T06:50:24.283" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="22" PostTypeId="2" ParentId="16" CreationDate="2015-06-30T18:55:15.500" Score="5" Body="&lt;p&gt;Recommended System &lt;a href=&quot;https://elementary.io/en/docs/installation#download-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;Specifications&lt;/a&gt; for elementary OS :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Intel i3 or comparable dual-core 64-bit processor  &lt;/li&gt;&#xA;  &lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;  &lt;li&gt;15 GB of disk space  &lt;/li&gt;&#xA;  &lt;li&gt;Internet access   &lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Download Elementary OS from &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Shrink one of your partition in windows (for example shrink 20GB)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot in to live USB or disk.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Now you’ll be asked to choose the language of the operating system to be installed. So select your language and click &lt;strong&gt;Install elementary&lt;/strong&gt;.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/8Nv8T.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;After that you will see this page, Click continue. (It's better to uncheck Download updates while installing and Install this third-party software)&#xA;&lt;img src=&quot;https://i.stack.imgur.com/QzGdp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;strong&gt;something else&lt;/strong&gt; and click &lt;strong&gt;install now&lt;/strong&gt;.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/DjnXd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Now you will see this page which is for creating elementary partitions.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/vIDdE.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select your free space partition which had done in step 2 and click on &lt;strong&gt;Add...&lt;/strong&gt; button. Here you will need to create at least three partitions ( &lt;code&gt;/&lt;/code&gt; , &lt;code&gt;/home&lt;/code&gt; and &lt;code&gt;swap&lt;/code&gt; )&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/C5CtM.png&quot; alt=&quot;enter image description here&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/pKHr9.png&quot; alt=&quot;enter image description here&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/Ez6Sd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;9&quot;&gt;&#xA;&lt;li&gt;Choose your location for time zone selection and click continue.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/XYK84.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;10&quot;&gt;&#xA;&lt;li&gt;Choose your language and click continue.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/roB2Q.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Fill in your information and choose a strong root/administrator password and click continue.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/VcW2u.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Core installation process starts wait until it finished and then restart your PC.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/PpqWb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Important:&lt;/strong&gt; For dual-booting on UEFI mode see this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/278/cannot-boot-freya-after-installing-alongside-windows-on-uefi/#306&quot;&gt;answer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-01-12T11:16:11.970" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="23" PostTypeId="2" ParentId="10" CreationDate="2015-06-30T18:57:25.470" Score="8" Body="&lt;p&gt;In contrast to both nvidia and AMD, Intel actually does not provide &quot;proprietary&quot; drivers - They release their graphics stack completely open source. The version provided by the Intel installer is &lt;code&gt;2.99.917&lt;/code&gt;. Freya provides &lt;code&gt;2.99.910-ubuntu1.6+elementary0.3.1&lt;/code&gt;. As you can see, they are only a few versions off - But the elementary-provided driver has some custom patches which ensure best experience with Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, if you don't have any specific problems with your graphic card (which seems to be unlikely as HD4000 should be well supported), please &lt;strong&gt;please don't add any PPAs or install the drivers via Intel-provided installers&lt;/strong&gt;. You don't need it.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-06-30T18:57:25.470" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="24" PostTypeId="1" AcceptedAnswerId="25" CreationDate="2015-06-30T19:02:51.140" Score="15" ViewCount="1701" Body="&lt;p&gt;Currently my user profile picture is a small circular person:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/K9afU.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I change this?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="45" LastEditDate="2015-08-01T00:47:40.167" LastActivityDate="2018-05-07T14:42:04.780" Title="How do I change my user profile picture?" Tags="|greeter|user|profile|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="25" PostTypeId="2" ParentId="24" CreationDate="2015-06-30T19:02:51.140" Score="19" Body="&lt;p&gt;Open system settings and click User Accounts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/gEXrc.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click your current profile picture, and chose &quot;Select From File&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/dHeMc.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then navigate to the file, and click Open&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/0XOhi.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chose the section with the box, and then click &quot;Change Avatar&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/pqU1g.png&quot; width=&quot;330&quot; &gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your chosen image will be set as your profile picture:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/H65bc.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:36:20.543" LastActivityDate="2015-07-05T15:36:20.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="26" PostTypeId="1" AcceptedAnswerId="31" CreationDate="2015-06-30T19:05:44.600" Score="10" ViewCount="1160" Body="&lt;p&gt;I've been trying for 5 minutes to select about 10 files and delete them. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I can't select multiple items. How am I meant to do this? The ticks don't seem to affect it (but that might be bad mouse skills). Can I change the default from 1 click open to 2 click open?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:24:49.527" LastActivityDate="2016-10-01T19:12:07.920" Title="How can I select a file without it opening?" Tags="|pantheon-files|click|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="27" PostTypeId="1" AcceptedAnswerId="98" CreationDate="2015-06-30T19:11:01.187" Score="16" ViewCount="1876" Body="&lt;p&gt;I am used to using Super on Ubuntu to open the search. Can I set &lt;kbd&gt;Super&lt;/kbd&gt; to be the shortcut instead of &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or does elementary OS not support Modifier key only bindings? I know that OS X doesn't because I wanted &lt;kbd&gt;Super&lt;/kbd&gt; for the Spotlight search, and couldn't have it.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-25T01:54:53.033" LastActivityDate="2016-04-25T01:54:53.033" Title="Can I change the Applications Dropdown shortcut to Super not Alt+F2?" Tags="|applications|keyboard-shortcuts|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="28" PostTypeId="1" AcceptedAnswerId="69" CreationDate="2015-06-30T19:11:09.860" Score="10" ViewCount="3556" Body="&lt;p&gt;I'm using Elementary OS Freya with UEFI mode. My laptop has two graphic cards (Intel 4400 and nVidia 860 GTX) and it is getting very hot after using about 30-60 minutes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install bumblebee but every way I tried (like &lt;a href=&quot;https://gist.github.com/jorgemario/96b18938090d2bd36405&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/jorgemario/96b18938090d2bd36405&lt;/a&gt;) the nVidia module was not installed correctly and said:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;modprobe: FATAL: Module bbswitch not found.&#xA;[  924.996622] [ERROR]Module bbswitch could not be loaded (timeout?)&#xA;[  924.996656] [WARN]No switching method available. The dedicated card will always be on.&#xA;[  924.997915] [ERROR]Module 'nvidia' is not found.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing that i should mention is if &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28/installing-bumblebee-on-freya#69&quot;&gt;Luís's&lt;/a&gt; answer not working properly try to disable secure boot and UEFI from bios setting.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-09T07:52:25.887" Title="Installing bumblebee on Freya" Tags="|software-installation|graphic-drivers|bumblebee|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="29" PostTypeId="1" AcceptedAnswerId="32" CreationDate="2015-06-30T19:13:08.283" Score="17" ViewCount="3900" Body="&lt;p&gt;I would like to have an icon for Dropbox in Wingpanel (preferably one that matches the style of the default icons there) and have it display the current status (updated, synchronizing, offline).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the best/easiest way to achieve this?&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-07-05T12:20:47.503" LastActivityDate="2019-12-06T07:16:42.147" Title="How to integrate Dropbox with Wingpanel?" Tags="|applications|wingpanel|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="30" PostTypeId="2" ParentId="3" CreationDate="2015-06-30T19:16:31.800" Score="1" Body="&lt;p&gt;It should also be possible to install the guest utilities from the repositories. You can either install via &quot;Software Center&quot; or via shell. The package is named &lt;code&gt;virtualbox-guest-x11&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install via shell open the shell with &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; and enter &lt;code&gt;sudo apt-get update&lt;/code&gt; to update the repository information and &lt;code&gt;sudo apt-get install virtualbox-guest-x11&lt;/code&gt; to install the guest utilities.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a package named &lt;code&gt;virtualbox-guest-utils&lt;/code&gt; for systems without desktop environment. But elementary is usually installed with its desktop environment.&lt;/p&gt;&#xA;" OwnerUserId="88" LastEditorUserId="88" LastEditDate="2015-06-30T19:21:42.550" LastActivityDate="2015-06-30T19:21:42.550" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="31" PostTypeId="2" ParentId="26" CreationDate="2015-06-30T19:19:50.060" Score="16" Body="&lt;p&gt;&lt;strong&gt;Selecting files / folders&lt;/strong&gt; works fine for me in Pantheon Files by either:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Using and clicking the checkmark at the top left of an icon to select one or multiple entries.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Clicking and dragging the mouse on an empty area to make a rectangular selection area.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Pressing the control key (&lt;kbd&gt;ctrl&lt;/kbd&gt;) before clicking on an icon also allows to select one or multiple files. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you only want to select one file you can also just do a right click and choose the action immediately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;trash an item&lt;/strong&gt; just press delete (&lt;kbd&gt;del&lt;/kbd&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have problems with selecting files / don't like the default behaviour you can &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/38/how-can-i-disable-single-click-enable-double-click-in-files-to-open-an-item/39#39&quot;&gt;change the behaviour to open items on double click&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-01T19:12:07.920" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="32" PostTypeId="2" ParentId="29" CreationDate="2015-06-30T19:20:19.263" Score="14" Body="&lt;p&gt;To add the Dropbox icon to the Panel I used the script &quot;Dropbox for elementary OS&quot;, available &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Instructions&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;This script, designed for elementary OS, installs the latest version of Dropbox and integrates it with WingPanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/V1ihB.png&quot; alt=&quot;System tray icon preview&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Before you install&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install &lt;code&gt;git&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and uninstall any previous version of Dropbox on your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove dropbox*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/zant95/elementary-dropbox /tmp/elementary-dropbox&#xA;bash /tmp/elementary-dropbox/install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Dropbox will auto-update when a new version is available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Uninstall&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/zant95/elementary-dropbox /tmp/elementary-dropbox&#xA;bash /tmp/elementary-dropbox/uninstall.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9" LastEditorUserId="308" LastEditDate="2019-12-06T07:13:00.893" LastActivityDate="2019-12-06T07:13:00.893" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="33" PostTypeId="1" AcceptedAnswerId="37" CreationDate="2015-06-30T19:24:09.083" Score="19" ViewCount="4369" Body="&lt;p&gt;It'd be nicer if the Skype icon was smaller and white. Here's how it looks right now:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9xWLy.png&quot; alt=&quot;skype icon&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="1139" LastEditDate="2015-10-22T18:35:11.290" LastActivityDate="2016-09-16T11:40:29.427" Title="How can I change the Skype icon in the wingpanel to match the default style?" Tags="|applications|wingpanel|icons|luna|skype|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="35" PostTypeId="1" AcceptedAnswerId="43" CreationDate="2015-06-30T19:35:03.667" Score="5" ViewCount="758" Body="&lt;p&gt;What is the recommended way to install GIMP 2.8?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The version present in the default elementary Luna repositories is 2.6.&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-06-30T19:49:48.367" LastActivityDate="2018-11-26T08:32:36.107" Title="How do I install the latest version of GIMP in Luna?" Tags="|applications|software-installation|gimp|luna|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="37" PostTypeId="2" ParentId="33" CreationDate="2015-06-30T19:39:01.723" Score="29" Body="&lt;p&gt;&lt;strong&gt;This solution will work on elementary OS 0.3 (Freya) and 0.4 (Loki), Luna users should follow &lt;a href=&quot;https://elementaryos.stackexchange.com/a/99/22&quot;&gt;PNG's answer&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To change the skype icon (and many other) you have to install the &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary+ icon theme&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This theme is a community maintained addition to elementary OS's default icon theme. It contains icons for several third party applications that resemble elementary OS's style.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add this PPA (Personal Package Archive) to your sources:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cybre/elementaryplus&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;sudo apt-get install elementaryplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the elementary+ icon theme and the patched sni-qt got successfully installed, open elementary+ Configurator in your Slingshot (applications menu), select Skype and hit Apply.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/DiEnW.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart Skype and you should have a nice white Skype indicator icon&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2cGT9.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Testing in Loki: avoid activating the core icon theme (first entry in the program window), as it disables some icons (like Synaptic). &lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-16T11:40:29.427" CommentCount="18" ContentLicense="CC BY-SA 3.0" />
  <row Id="38" PostTypeId="1" AcceptedAnswerId="39" CreationDate="2015-06-30T19:39:41.537" Score="55" ViewCount="39241" Body="&lt;p&gt;By default Pantheon Files, the file manager in elementary OS, uses a single click to open files and folders. How can I change this to double click, similar to Windows?&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:18:37.423" LastActivityDate="2023-07-28T11:07:44.830" Title="Configure Files to use double click" Tags="|pantheon-files|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="39" PostTypeId="2" ParentId="38" CreationDate="2015-06-30T19:39:41.537" Score="74" Body="&lt;p&gt;Choose &lt;strong&gt;one&lt;/strong&gt; of the following methods, restoring the old behaviour works similarly:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;elementary OS 5.0 Juno (current version)&lt;/h1&gt;&#xA;&#xA;&lt;h3&gt;GSettings (recommended)&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Run the following command in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.files.preferences single-click false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(To enable single-click again use &lt;code&gt;true&lt;/code&gt; instead of &lt;code&gt;false&lt;/code&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Dconf Editor&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Start &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/dconf-tools/&quot; rel=&quot;noreferrer&quot;&gt;Dconf Editor&lt;/a&gt; (not installed by default) from Slingshot or by running &lt;code&gt;dconf-editor&lt;/code&gt; in terminal. Navigate to &lt;code&gt;io.elementary.files.preferences&lt;/code&gt;. Disable the checkmark on single click.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;elementary OS 0.4 Loki (old version)&lt;/h2&gt;&#xA;&#xA;&lt;h3&gt;GSettings (recommended)&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Run the following command in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.files.preferences single-click false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(To enable single-click again use &lt;code&gt;true&lt;/code&gt; instead of &lt;code&gt;false&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Dconf Editor&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Start &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/dconf-tools/&quot; rel=&quot;noreferrer&quot;&gt;Dconf Editor&lt;/a&gt; (not installed by default) from Slingshot or by running &lt;code&gt;dconf-editor&lt;/code&gt; in terminal. Navigate to &lt;code&gt;org.pantheon.files.preferences&lt;/code&gt;. Disable the checkmark on single click.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;elementary tweaks (not recommended)&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you have &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;noreferrer&quot;&gt;elementary tweaks&lt;/a&gt; (an unofficial, unsupported, 3rd party elementary configuration software) installed you can change the behaviour in &lt;code&gt;System Settings &amp;gt; Tweaks &amp;gt; Files (left sidebar) &amp;gt; Single Click&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2019-04-04T21:38:36.113" LastActivityDate="2019-04-04T21:38:36.113" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="40" PostTypeId="1" AcceptedAnswerId="41" CreationDate="2015-06-30T19:41:45.767" Score="14" ViewCount="2542" Body="&lt;p&gt;I'd like to be able to see graphs for CPU, RAM, network activity, etc. at a glance, without having to open a dedicated task monitor application.&lt;/p&gt;&#xA;" OwnerUserId="84" LastActivityDate="2019-11-24T13:55:46.273" Title="How can I show performance graphs in Wingpanel?" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="41" PostTypeId="2" ParentId="40" CreationDate="2015-06-30T19:41:45.767" Score="16" Body="&lt;p&gt;&lt;strong&gt;&lt;em&gt;Heads-up&lt;/strong&gt;: this answer only applies to Loki. If anyone wants to add an answer that applies to Juno, It'd be very welcome!&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can install &lt;code&gt;indcator-multiload&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:indicator-multiload/stable-daily &amp;amp;&amp;amp;&#xA;sudo apt update &amp;amp;&amp;amp;&#xA;sudo apt install indicator-multiload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run it for the first time from the Applications menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what it looks like, using the &quot;Traditional&quot; color scheme:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JU0Kx.png&quot; alt=&quot;indicator-multiload&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kudos to &lt;a href=&quot;http://www.reddit.com/r/elementaryos/comments/32gxlr/noob_question_how_could_i_change_the_flux/cql7ji0&quot; rel=&quot;nofollow noreferrer&quot;&gt;SeriouslyLaughing at Reddit&lt;/a&gt; for the solution.&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2018-11-19T15:51:59.897" LastActivityDate="2018-11-19T15:51:59.897" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="43" PostTypeId="2" ParentId="35" CreationDate="2015-06-30T19:42:01.160" Score="10" Body="&lt;h3&gt;Option 1: Upgrade to Freya&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;The recommended way would be to upgrade to Freya, sooner rather than later. That will get you a whole host of updates on various things, including updating GIMP to &lt;a href=&quot;http://packages.ubuntu.com/trusty/gimp&quot; rel=&quot;nofollow noreferrer&quot;&gt;2.8.10&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 2: Add the Repository&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;With a little command-line magic, you can indeed upgrade GIMP, and only GIMP, in a way that will keep you up to date in the future. Otto Kesselgulasch's repository will likely upgrade you to the latest release, currently &lt;a href=&quot;https://launchpad.net/~otto-kesselgulasch/+archive/ubuntu/gimp&quot; rel=&quot;nofollow noreferrer&quot;&gt;2.8.14&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The code below adds and auto-confirms the PPA repository, and quietens down the updating a little. That means it may take a while to show progress, and may look like it's stopped, but rest assured it's still working away.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:otto-kesselgulasch/gimp &amp;amp;&amp;amp; &#xA;sudo apt-get update -qq &amp;amp;&amp;amp; &#xA;sudo apt-get install gimp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="84" LastEditDate="2018-11-26T08:32:36.107" LastActivityDate="2018-11-26T08:32:36.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="45" PostTypeId="1" AcceptedAnswerId="47" CreationDate="2015-06-30T20:24:06.323" Score="12" ViewCount="9684" Body="&lt;p&gt;I have downloaded elementary-tweaks for Freya. I have also installed a few themes using PPA. What if I have a theme in a file and I want to include it in the gallery of the themes? How can I add it manually without having to use the PPA?&lt;/p&gt;&#xA;" OwnerUserId="108" LastEditorUserId="3757" LastEditDate="2016-04-24T06:15:23.947" LastActivityDate="2016-12-17T07:38:17.077" Title="How can I add more themes on Elementary-Tweaks?" Tags="|applications|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="47" PostTypeId="2" ParentId="45" CreationDate="2015-06-30T20:47:00.653" Score="17" Body="&lt;p&gt;There are two ways:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Copy the theme to the system wide theme folder&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp -R [theme-folder] /usr/share/themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Copy the theme to your users local theme folder&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp -R [theme-folder] ~/.themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If your local theme folder doesn't exist yet, you will have to create it first:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It's not recommended to use elementary-tweaks as it has been known to break systems. Instead use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface gtk-theme &quot;CoolestThemeOnEarth&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, if you want to, you can use elementary Tweaks to do the same thing.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="578" LastEditorDisplayName="user3" LastEditDate="2016-12-17T07:38:17.077" LastActivityDate="2016-12-17T07:38:17.077" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="48" PostTypeId="1" AcceptedAnswerId="50" CreationDate="2015-06-30T20:58:40.903" Score="2" ViewCount="178" Body="&lt;p&gt;Skype offers the following downloads:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/055Pl.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which should I chose? The Ubuntu 12.04 doesn't seem to work - it seems to install then just isn't installed again with no popup error message.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="16827" LastEditDate="2019-04-30T15:49:22.673" LastActivityDate="2019-04-30T15:49:22.673" Title="What Skype do I need to download?" Tags="|software-installation|skype|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="49" PostTypeId="1" CreationDate="2015-06-30T20:59:50.217" Score="6" ViewCount="3404" Body="&lt;p&gt;I want to be able to quickly open a new window of Pantheon Files with root to do administrative tasks (e.g. edit .desktop files). So when I right-click on a folder icon it would be nice to have an option to &quot;Open folder as root&quot; similar to the already present &quot;Open in Terminal&quot;.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:27:56.280" LastActivityDate="2018-02-03T17:29:41.877" Title="How to add 'Open folder as root' to Files right-click context menu?" Tags="|pantheon-files|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="50" PostTypeId="2" ParentId="48" CreationDate="2015-06-30T21:02:11.087" Score="4" Body="&lt;p&gt;Downloading from &lt;a href=&quot;http://www.skype.com/en/download-skype/skype-for-computer/&quot; rel=&quot;nofollow&quot;&gt;Skype.com&lt;/a&gt;, the Ubuntu 12.04 (multiarch) will provide the best software for any elementary Luna or Freya installation. In the future, should a Ubuntu 14.04 version become available, then that would be preferable on Freya.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-06-30T21:02:11.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="51" PostTypeId="1" AcceptedAnswerId="54" CreationDate="2015-06-30T21:02:31.093" Score="11" ViewCount="1442" Body="&lt;p&gt;How can I upgrade from elementary OS Luna to Freya without losing my data? &lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="3757" LastEditDate="2016-04-25T01:52:46.617" LastActivityDate="2016-04-25T01:53:35.043" Title="What is the recommended way to upgrade elementary OS 0.2 Luna to 0.3 Freya?" Tags="|release-freya|luna|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="52" PostTypeId="2" ParentId="49" CreationDate="2015-06-30T21:12:01.677" Score="6" Body="&lt;p&gt;It is already there for me in the dock:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NDM5I.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you can't see that, use &lt;code&gt;sudo&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You want to be able to jump to a &lt;code&gt;sudo&lt;/code&gt; instance of the current folder. It's a little roundabout, but you could right click, open in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TwH4v.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i pantheon-files $(pwd)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you could even set up an alias for it.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-06-30T21:12:01.677" CommentCount="15" ContentLicense="CC BY-SA 3.0" />
  <row Id="53" PostTypeId="1" AcceptedAnswerId="55" CreationDate="2015-06-30T21:17:19.607" Score="11" ViewCount="1724" Body="&lt;p&gt;I want to set up a shorter name as an alias of this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i pantheon-files $(pwd)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example I want to type &lt;code&gt;sfoh&lt;/code&gt; (for sudo file open here) and it should run this command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I do this?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="190" LastEditDate="2015-07-01T21:45:10.513" LastActivityDate="2015-07-08T19:05:22.480" Title="How can I set up an alias for a command?" Tags="|command-line|bash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="54" PostTypeId="2" ParentId="51" CreationDate="2015-06-30T21:19:31.767" Score="10" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;At the moment elementary isn't providing an upgrade path from update manager since results are mixed. Sometimes it works, sometimes it doesn't. You can try:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Back up EVERYTHING.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;noreferrer&quot;&gt;Make a Freya install disk&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Boot from the install disk and select the &amp;quot;upgrade&amp;quot; option.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;However, as I said, results may vary. &lt;em&gt;It's always recommended to perform a clean install&lt;/em&gt;. An upgrade will not give you the exact same experience as a clean install since it won't overwrite your personal settings. This is important for new features like tab naming in Terminal.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/198340/upgrading-elementary-os-to-freya&quot;&gt;Source, Unix and Linux&lt;/a&gt;. Posted 2015-04-24, so the information is up to date.&lt;/p&gt;&#xA;&lt;p&gt;As said, clean installs are often safer as they reset everything and nothing will conflict. If there is any way you can, try to do a new install.&lt;/p&gt;&#xA;&lt;p&gt;For backing up, I recommend CrashPlan, and trust it when I reinstall. &lt;a href=&quot;http://support.code42.com/CrashPlan/Latest/Getting_Started/Installing_The_CrashPlan_App#Linux&quot; rel=&quot;noreferrer&quot;&gt;Instructions for installation on Linux&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-06-30T21:19:31.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="55" PostTypeId="2" ParentId="53" CreationDate="2015-06-30T21:23:31.720" Score="7" Body="&lt;h2&gt;For this session&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Simply run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias key='your long command'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Permanently&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Add the commands as described above into &lt;code&gt;.bash_aliases&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open scratch with the Applications menu and edit the file &lt;code&gt;.bash_aliases&lt;/code&gt; in your home directory. It's a hidden file, so press Ctrl+H to see it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you can type in the terminal: &lt;code&gt;scratch-text-editor ~/.bash_aliases&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then add into it the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias key='your long command'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To apply the changes immediately run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;source ~/.bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2015-07-08T19:05:22.480" LastActivityDate="2015-07-08T19:05:22.480" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="57" PostTypeId="2" ParentId="53" CreationDate="2015-06-30T21:30:47.983" Score="4" Body="&lt;p&gt;Creating an alias is quite simple, and it opens a whole realm of possibility for adding shortcuts to your terminal usage.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;In General:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Open up &lt;code&gt;~/.bashrc&lt;/code&gt; in your favourite text editor, and add the following to the end:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias &amp;lt;string&amp;gt;='&amp;lt;full and long command&amp;gt;'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;For your specific example:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Again, adding to the end of the &lt;code&gt;.bashrc&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias sfoh='sudo -i pantheon-files $(pwd)'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This does not require a restart to take effect, but it will require a new terminal window to be opened so that the &lt;code&gt;~/.bashrc&lt;/code&gt; file can be parsed again.&lt;/p&gt;&#xA;" OwnerUserId="120" LastEditorUserId="120" LastEditDate="2015-06-30T21:42:17.157" LastActivityDate="2015-06-30T21:42:17.157" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="58" PostTypeId="1" AcceptedAnswerId="60" CreationDate="2015-06-30T21:49:36.250" Score="8" ViewCount="5767" Body="&lt;p&gt;A LAMP stack consist of Linux, Apache, MySQL and PHP. What is the best way to install this stack for local development?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="38" LastEditDate="2015-07-01T19:45:00.363" LastActivityDate="2015-07-01T19:45:00.363" Title="How do I install a LAMP stack?" Tags="|web-development|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="59" PostTypeId="1" AcceptedAnswerId="79" CreationDate="2015-06-30T21:52:46.493" Score="23" ViewCount="12598" Body="&lt;p&gt;And I don't mean the font size used by text within applications (&lt;em&gt;Terminal&lt;/em&gt; or any browser), which can be zoomed in and out, but the font size which is used by &lt;em&gt;Slingshot&lt;/em&gt;, &lt;em&gt;Files&lt;/em&gt; or any other system application. For my laptop's 17-inch screen turns out to be really small.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We all know tweaks is not recommended.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Freya.&lt;/p&gt;&#xA;" OwnerUserId="123" LastEditorDisplayName="user3" LastEditDate="2015-07-05T11:43:24.487" LastActivityDate="2017-05-03T14:22:44.870" Title="How can I change the font size used by the desktop?" Tags="|fonts|desktop|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="60" PostTypeId="2" ParentId="58" CreationDate="2015-06-30T21:53:22.347" Score="5" Body="&lt;p&gt;I use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lamp-server^&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It installs the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apache2 apache2-bin apache2-data apache2-mpm-prefork libaio1 libapache2-mod-php5&#xA;libapr1 libaprutil1 libaprutil1-dbd-sqlite3 libaprutil1-ldap libdbd-mysql-perl&#xA;libdbi-perl libhtml-template-perl libmysqlclient18 libterm-readkey-perl&#xA;mysql-client-5.5 mysql-client-core-5.5 mysql-server mysql-server-5.5&#xA;mysql-server-core-5.5 php5-cli php5-common php5-json php5-mysql php5-readline&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As a summary, that includes &lt;code&gt;apache&lt;/code&gt;, &lt;code&gt;mysql&lt;/code&gt; and &lt;code&gt;php&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-06-30T21:53:22.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="61" PostTypeId="1" AcceptedAnswerId="64" CreationDate="2015-06-30T21:55:06.400" Score="10" ViewCount="3445" Body="&lt;p&gt;My app launcher is quite full; Google Chrome adds a lot of apps to slingshot, and I don't use things such as the multitasking overview or the software centre. Is there any way I can hide these apps from view?&lt;/p&gt;&#xA;" OwnerUserId="120" LastActivityDate="2015-11-14T08:30:37.210" Title="How can I hide apps in slingshot?" Tags="|release-freya|slingshot|apps|" AnswerCount="4" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="62" PostTypeId="2" ParentId="61" CreationDate="2015-06-30T22:05:33.253" Score="4" Body="&lt;p&gt;As you don't need to access them any more, you can remove the &lt;code&gt;.desktop&lt;/code&gt; files from:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyway, to know what ones you want to remove, select them all and open properties. Then chose More and Click Execute, next to Owner and next to Group. The number should now be 774.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4QFKI.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Their icons will change from the unknown file to the app logo:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q11WR.png&quot; alt=&quot;&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hOP2e.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can delete the ones you no longer want.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-01T08:51:24.330" LastActivityDate="2015-07-01T08:51:24.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="63" PostTypeId="1" AcceptedAnswerId="121" CreationDate="2015-06-30T22:13:21.570" Score="7" ViewCount="142" Body="&lt;p&gt;I'm curious as to how the strength of a password is calculated, because the password I just entered wasn't classed at full strength:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/vcGB6.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it is full for Google, Medium for Microsoft and Full for another online checker:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/PGMuW.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/71XwZ.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/QanL2.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the password:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;d'c&amp;lt;nKZwSX64&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(no I'm not using it for anything).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what is the score based on here?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="26" LastEditDate="2015-07-08T19:26:47.573" LastActivityDate="2015-07-08T19:26:47.573" Title="How does elementary determine the strength of a password?" Tags="|security|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="64" PostTypeId="2" ParentId="61" CreationDate="2015-06-30T22:22:53.913" Score="13" Body="&lt;h2&gt;Delete web application desktop entries added by Chrome&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;to get rid of all web application entries, open a terminal session and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/.local/share/applications/chrome-*.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to delete only a few of them, you'll have to take a look inside of each file and delete only the ones you want get rid of.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Hide a desktop entry of a system application&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;if you want to hide an application like the multitasking overview, you have to copy it's .desktop file to your users local application folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/gala-multitaskingview.desktop ~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;edit the copied file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/applications/gala-multitaskingview.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NoDisplay=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-06-30T22:22:53.913" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="65" PostTypeId="1" AcceptedAnswerId="91" CreationDate="2015-06-30T22:29:36.110" Score="11" ViewCount="1634" Body="&lt;p&gt;I would like to use aptitude since its parameters are more consistent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it with: &lt;code&gt;sudo apt-get install aptitude&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any reasons not to use it with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="190" LastEditDate="2015-07-01T22:18:18.667" LastActivityDate="2015-07-01T22:18:18.667" Title="Can I use aptitude instead of apt-get without problems?" Tags="|apt|aptitude|package-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="67" PostTypeId="2" ParentId="27" CreationDate="2015-06-30T22:42:28.430" Score="6" Body="&lt;p&gt;You can set slingshot to launch by only pressing the super key by typing the following command into your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &quot;['Super_L']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="128" LastEditorDisplayName="user3" LastEditDate="2015-07-01T15:01:40.197" LastActivityDate="2015-07-01T15:01:40.197" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="68" PostTypeId="2" ParentId="58" CreationDate="2015-07-01T00:39:37.407" Score="2" Body="&lt;p&gt;For development, you should use Bitnami.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a standalone server package that handles it's own versions of the tools you need. It also helps you keep your system clean from development related modifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bitnami.com/stack/lamp&quot; rel=&quot;nofollow&quot;&gt;Get it here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="69" LastEditorDisplayName="user3" LastEditDate="2015-07-01T15:01:45.467" LastActivityDate="2015-07-01T15:01:45.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="69" PostTypeId="2" ParentId="28" CreationDate="2015-07-01T00:43:38.603" Score="5" Body="&lt;h2&gt;23/04/2016 UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;PLEASE REFER TO MY OTHER ANSWER&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;11/09/15 UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;DON'T FOLLOW THESE INSTRUCTIONS. THEY ARE NOT NEEDED ANYMORE BECAUSE OF THE RECENT UPDATE OF THE GRAPHICAL STACK THAT OCURRED ON ELEMENTARY FREYA&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how I managed to install bumblebee and the nvidia driver in elementary OS. Unfortunately, I am unable to install any version higher than nvidia-331. Every attempt to install nvidia official drivers or xorg-edgers drivers or any other driver different from the 331 ended up with no login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was helped by the fact that I installed elementary OS on a Btrfs partition. I would strongly encourage everyone to do that before trying to mess with the graphics driver. The funny thing is that I have done several installations of the driver in Ubuntu machines before, for some reason it is a lot harder to do it on elementary OS. This is a nice operating system, it definitely deserves a try, but it can be a little rough at the edges at this point. I also plan to update in here for the other modifications I needed to do to the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;So only follow this instructions if you can afford losing everything on you machine, do it for your own risk, ok?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you decide to install elementary OS on a BTRFS partition, go and do your first backup using &lt;a href=&quot;http://www.teejeetech.in/p/timeshift.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Timemshift&lt;/a&gt;. Then learn how to use the app.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Install bumblebee stable ppa&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;For some reason the bumblebee package on the repos do not work properly, the deamon keeps turning off. Also, the xorg-edgers ppa is incompatible with the modified version of lighdm from elementary OS and, even though, the installation can be done succesfully, you will end up stuck on a black screen in the first reboot after the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution I found is to use this old ppa. I know, this is not perfect, but this was the only way to get bumblebee to work in my machine, and maybe this is also your case:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:bumblebee/stable -y&#xA;sudo apt-get update&#xA;sudo apt-get install bumblebee nvidia-331primus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you have to make sure the bumblebee.conf is properly set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/bumblebee/bumblebee.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add the modify as follows ( &lt;a href=&quot;https://askubuntu.com/questions/549915/how-to-install-nvidia-drivers-with-bumblebee-on-ubuntu-14-04&quot;&gt;source&lt;/a&gt; ):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[bumblebee] section: after &quot;Driver=&quot; insert &quot;nvidia&quot;&#xA;[nvidia-driver] section: after &quot;KernelDriver=&quot; insert &quot;nvidia-XXX&quot;&#xA;[nvidia-driver] section: after &quot;LibraryPath=&quot; insert &quot;/usr/lib/nvidia-XXX, /usr/lib/nvidia-331-updates:/usr/lib32/nvidia-XXX&quot;&#xA;[nvidia-driver] section: after &quot;XorgModulePath=&quot; insert &quot;/usr/lib/nvidia-XXX/xorg,/usr/lib/xorg/modules&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where XXX is the nvidia driver you have installed, in the example:  nvidia-331&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case, a simple  &lt;code&gt;sudo service bumblebeed restart&lt;/code&gt; did the job, but you may need to restart.&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-04-23T04:33:41.670" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="70" PostTypeId="1" AcceptedAnswerId="71" CreationDate="2015-07-01T00:47:11.420" Score="7" ViewCount="331" Body="&lt;p&gt;A few days back I was reading a post regarding elementary OS and in the comment section there was a few people mentioning that there are a lot of outdated packages and that if anyone wanted to use the newest versions of software packages then elementary OS wasn't for him.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that there are some Linux distributions that are featuring outdated packages to be stable but I haven't really heard anything similar for elementary OS. Is there any truth to the statement I read in the comments?&lt;/p&gt;&#xA;" OwnerUserId="104" LastEditorUserId="16827" LastEditorDisplayName="user3" LastEditDate="2019-04-30T15:53:46.053" LastActivityDate="2019-04-30T15:53:46.053" Title="Does elementary OS feature outdated packages?" Tags="|appcenter|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="71" PostTypeId="2" ParentId="70" CreationDate="2015-07-01T01:31:39.127" Score="12" Body="&lt;p&gt;Depends what distribution you're comparing elementary OS with. Comparing with Arch and derivatives the packages are outdated, simply because elementary is stable and not bleeding edge.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Comparing with Ubuntu, elementary OS freya uses the same repositories as Ubuntu 14.04 for most of it's software including the kernel (3.16).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Within the Ubuntu world you could say elementary isn't outdated - it even features a more recent gtk package than Ubuntu unity/gnome 14.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most software is available in ppas for trusty and therefore elementary OS, including the latest nVidia Drivers, xorg and many others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, Ubuntu 14.04.3 should be released in August, which may bring us kernel 3.19 and lots of other improvements.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, overall, yes, elementary is generally distant from bleeding edge distributions in package update, but it is on par with the Ubuntu environment, and if you wish to have fresher packages there are a lot of ppas dedicated to that purpose.&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorDisplayName="user3" LastEditDate="2015-07-02T10:33:53.157" LastActivityDate="2015-07-02T10:33:53.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="72" PostTypeId="2" ParentId="58" CreationDate="2015-07-01T01:33:56.627" Score="0" Body="&lt;p&gt;You can use Xampp for Development LAMP environment. It will provide you manage LAMP with GUI. You can download it &lt;a href=&quot;https://www.apachefriends.org/download.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Give execution permission to Xampp Installer file by using following command. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x xampp-linux-x.x.xx-0-installer.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run the installer file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./xampp-linux-x.x.xx-0-installer.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;GUI Installation windows will be open and you will have installed Xampp. &lt;/p&gt;&#xA;" OwnerUserId="134" LastEditorDisplayName="user3" LastEditDate="2015-07-01T15:00:58.243" LastActivityDate="2015-07-01T15:00:58.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="73" PostTypeId="2" ParentId="61" CreationDate="2015-07-01T02:46:06.280" Score="0" Body="&lt;p&gt;There are two places where &lt;code&gt;.desktop&lt;/code&gt; files get stored: &lt;code&gt;/usr/share/applications/&lt;/code&gt; (system-wide) and &lt;code&gt;~/.local/share/applications&lt;/code&gt; (specific to the current user). Slingshot looks at those &lt;code&gt;.desktop&lt;/code&gt; places and shows them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Default applications get stored in the system wide one. Google Chrome is using the place specific for the current user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In both of the cases, you can delete the shortcut by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm NAME.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to delete system wide shortcuts, you'll have to use &lt;code&gt;sudo&lt;/code&gt; in front of the command.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-07-01T02:46:06.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="74" PostTypeId="2" ParentId="51" CreationDate="2015-07-01T02:52:56.480" Score="4" Body="&lt;p&gt;There is no officially supported way to upgrade to freya at the moment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to do a clean install, but keep the &lt;code&gt;/home&lt;/code&gt; partition the same and create a user with the same name as in your Luna installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By doing so, you'll keep all of the files you've stored and most of the application settings (although you'll probably have install them again for the settings to be applied).&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="3757" LastEditDate="2016-04-25T01:53:35.043" LastActivityDate="2016-04-25T01:53:35.043" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="75" PostTypeId="1" AcceptedAnswerId="76" CreationDate="2015-07-01T03:02:04.823" Score="17" ViewCount="540" Body="&lt;p&gt;Is there a place where you can see third party applications created specifically for elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorDisplayName="user3" LastEditDate="2015-07-08T09:43:56.613" LastActivityDate="2015-07-08T09:43:56.613" Title="Where can I find applications created specifically for elementary OS?" Tags="|software-installation|web-development|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="76" PostTypeId="2" ParentId="75" CreationDate="2015-07-01T03:02:04.823" Score="18" Body="&lt;p&gt;There are two maintained resources at the moment.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://madeforelementary.tumblr.com/&quot;&gt;Made for elementary&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://quassy.github.io/elementary-apps/&quot;&gt;elementary-apps&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The first one contains only applications that are stable or close to being stable. The second one contains those applications as well, but it also contains applications that are early in their development process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both of resources include only open source software as there is currently no proprietary applications made specifically for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-07-01T03:02:04.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="78" PostTypeId="1" AcceptedAnswerId="141" CreationDate="2015-07-01T03:16:18.373" Score="11" ViewCount="781" Body="&lt;p&gt;I can't find any proprietary applications that follow elementary's design guidelines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I were to create one, what should I keep in mind? Which technologies could I use to create one without breaking any licensing rules?&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorDisplayName="user3" LastEditDate="2015-07-08T09:43:04.857" LastActivityDate="2019-12-06T06:56:11.873" Title="What are the rules about developing closed source software for elementary OS?" Tags="|proprietary|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="79" PostTypeId="2" ParentId="59" CreationDate="2015-07-01T04:00:47.150" Score="23" Body="&lt;p&gt;&lt;strong&gt;Quick Fix - Text Scaling&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can increase the text size of most interface elements by turning on 'Large Text' in the Universal Access settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Applications Menu -&gt; System Settings -&gt; Universal Access -&gt; Seeing -&gt; Large Text&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;em&gt;Large Text&lt;/em&gt; slider toggles the value of &lt;em&gt;org.gnome.desktop.interface text-scaling-factor&lt;/em&gt; between 1.0 and 1.25. &#xA;If you want a little more control you can edit the setting directly via the command line as follows &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface text-scaling-factor &amp;lt;value&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should be noted that this will only scale text that relies on this setting. Some elements such as browser text etc may have their own in-app settings you will have to look for (from your question it appears you are already aware of this). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alternative - Set DPI&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternate method which is arguably 'better' would be to adjust your entire screens DPI setting. If you want to go down that route I suggest having a read of &lt;a href=&quot;https://askubuntu.com/a/272172/420908&quot; title=&quot;this&quot;&gt;this&lt;/a&gt; to get you started or asking a new question.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-01T04:00:47.150" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="80" PostTypeId="1" AcceptedAnswerId="82" CreationDate="2015-07-01T05:34:18.657" Score="10" ViewCount="5536" Body="&lt;p&gt;I'm using elementary Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to upgrade the Linux kernel to 4.0?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And by upgrading kernel can we download and install packages from elementary ppa ? &lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="190" LastEditDate="2015-07-01T18:55:16.587" LastActivityDate="2015-07-02T05:54:59.903" Title="How to install kernel 4.0 on Freya?" Tags="|software-installation|kernel|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="81" PostTypeId="1" AcceptedAnswerId="83" CreationDate="2015-07-01T05:58:02.830" Score="25" ViewCount="34006" Body="&lt;p&gt;I cannot change the login screen background in elementary OS. Is there any way to change it?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="26" LastEditDate="2017-04-07T13:16:38.200" LastActivityDate="2021-07-27T16:16:22.403" Title="How do I change login background in elementary OS Freya or Loki?" Tags="|release-freya|release-loki|settings|greeter|" AnswerCount="11" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="82" PostTypeId="2" ParentId="80" CreationDate="2015-07-01T06:36:55.383" Score="16" Body="&lt;ol&gt;&#xA;&lt;li&gt;Access the Ubuntu kernel PPA mainline repository &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.1-unstable/&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux-headers-4.1.0-040100-generic_4.1.0-040100.201506220235_&amp;lt;infrastructure&amp;gt;.deb&#xA;linux-headers-4.1.0-040100_4.1.0-040100.201506220235_all.deb&#xA;linux-image-4.1.0-040100-generic_4.1.0-040100.201506220235_&amp;lt;infrastructure&amp;gt;.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;cd&lt;/code&gt; into the download directory and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;On reboot your system should boot the latest kernel. You can test this by running &lt;code&gt;uname -r&lt;/code&gt;. Note that this will &lt;strong&gt;not&lt;/strong&gt; automatically update from this point forward (in particular, you won't get any security fixes), and that this is not supported by elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for your question about PPAs: installing a newer kernel will not change anything about your ability to use PPAs.&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="190" LastEditDate="2015-07-02T05:54:59.903" LastActivityDate="2015-07-02T05:54:59.903" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="83" PostTypeId="2" ParentId="81" CreationDate="2015-07-01T06:59:53.027" Score="22" Body="&lt;p&gt;You can change it by editing the file &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/lightdm/pantheon-greeter.conf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There you will find the line &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default-wallpaper=/usr/share/backgrounds/elementaryos-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add a line to the file something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default-wallpaper=/usr/share/backgrounds/168.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logout and you can see the change.&lt;/p&gt;&#xA;" OwnerUserId="53" LastEditorDisplayName="user3" LastEditDate="2015-07-12T11:29:41.563" LastActivityDate="2015-07-12T11:29:41.563" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="84" PostTypeId="2" ParentId="81" CreationDate="2015-07-01T07:01:15.543" Score="2" Body="&lt;p&gt;You can also install &lt;a href=&quot;https://github.com/agronick/Wallpaper-Slideshow&quot; rel=&quot;nofollow&quot;&gt;Wallpaper-Slideshow&lt;/a&gt; which will automatically change both your desktop and login background after a user-defined period of time. &lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-01T07:01:15.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="85" PostTypeId="2" ParentId="81" CreationDate="2015-07-01T07:05:45.340" Score="3" Body="&lt;p&gt;Copy your wallpaper in &lt;code&gt;/usr/share/backgrounds&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/backgrounds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just remove the symlink and add another one.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm elementaryos-default&#xA;sudo ln -s yourWallpaper.jpg elementaryos-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="47" LastActivityDate="2015-07-01T07:05:45.340" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="86" PostTypeId="2" ParentId="78" CreationDate="2015-07-01T07:54:44.543" Score="2" Body="&lt;p&gt;There actually are quite a few apps that were made for elementary OS, and there are a couple of sites that aggregate them, mainly &lt;a href=&quot;http://madeforelementary.tumblr.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;madeforelementary.tumblr.com&lt;/a&gt; and &lt;a href=&quot;http://quassy.github.io/elementary-apps/&quot; rel=&quot;nofollow noreferrer&quot;&gt;quassy.github.io/elementary-apps&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to develop your own app, there's &lt;a href=&quot;https://developer.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;the developer site&lt;/a&gt; that helps you do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the technologies - if you want your apps to blend in as much as they can, you should use &lt;a href=&quot;https://github.com/elementary/granite&quot; rel=&quot;nofollow noreferrer&quot;&gt;Granite&lt;/a&gt;, and by extension &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala&lt;/a&gt;. If you want your app to behave well (but not perfectly) on multiple systems, you should use the latest GTK and the &lt;a href=&quot;http://www.gtk.org/language-bindings.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;language of your preference&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="49" LastEditorUserId="308" LastEditorDisplayName="user3" LastEditDate="2019-12-06T06:56:11.873" LastActivityDate="2019-12-06T06:56:11.873" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="87" PostTypeId="2" ParentId="61" CreationDate="2015-07-01T07:55:40.807" Score="0" Body="&lt;p&gt;Disable the checkbox &lt;code&gt;Applications menu&lt;/code&gt; when creating a Chrome application shortcut:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/nrbJL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-01T07:55:40.807" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="88" PostTypeId="1" AcceptedAnswerId="92" CreationDate="2015-07-01T08:17:06.523" Score="5" ViewCount="1014" Body="&lt;p&gt;How can I install multiple fonts (like 40-50) at once? Do I have to do it manually or is there any option to add them once?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="26" LastEditDate="2015-07-01T09:56:00.453" LastActivityDate="2015-07-01T09:56:00.453" Title="How to install multiple fonts at once?" Tags="|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="89" PostTypeId="2" ParentId="63" CreationDate="2015-07-01T08:19:45.030" Score="5" Body="&lt;p&gt;We use a library called &lt;a href=&quot;https://launchpad.net/libpwquality&quot;&gt;&lt;code&gt;libpwquality&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-01T08:19:45.030" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="90" PostTypeId="2" ParentId="88" CreationDate="2015-07-01T08:21:14.907" Score="2" Body="&lt;p&gt;Create a &lt;code&gt;.font&lt;/code&gt; folder in home if it doesn't exists and copy all your fonts on the &lt;code&gt;.font&lt;/code&gt; folder.&lt;/p&gt;&#xA;" OwnerUserId="129" LastActivityDate="2015-07-01T08:21:14.907" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="91" PostTypeId="2" ParentId="65" CreationDate="2015-07-01T08:35:15.910" Score="11" Body="&lt;h3&gt;TL;DR:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Yes you can.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Full answer:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;What are the differences?&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;code&gt;aptitude&lt;/code&gt; adds explicit per-package flags, indicating whether a package was automatically installed to satisfy a dependency: you can manipulate those flags (&lt;code&gt;aptitude markauto&lt;/code&gt; or &lt;code&gt;aptitude unmarkauto&lt;/code&gt;) to change the way aptitude treats the package.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;apt-get&lt;/code&gt; keeps track of the same information, but will not show it explicitly. &lt;code&gt;apt-mark&lt;/code&gt; can be used for manipulating the flags.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;code&gt;aptitude&lt;/code&gt; will offer to remove unused packages each time you remove an installed package, whereas apt-get will only do that if explicitly asked to with &lt;code&gt;apt-get autoremove&lt;/code&gt; or specify &lt;code&gt;--auto-remove&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;code&gt;aptitude&lt;/code&gt; acts as a single command-line front-end to most of the   functionalities in both &lt;code&gt;apt-get&lt;/code&gt; and &lt;code&gt;apt-cache&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;In contrast to &lt;code&gt;apt-cache&lt;/code&gt;'s &quot;search&quot;, aptitude's &quot;search&quot; output also shows the installed/removed/purged status of a package (plus aptitude's own status flags).  Also, the &quot;install&quot; output marks which packages are being installed to satisfy a dependency, and which are being removed because unused.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/1749/186134&quot;&gt;Source, Ask Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So there are a few differences between &lt;code&gt;apt-get&lt;/code&gt; and &lt;code&gt;aptitude&lt;/code&gt;. Because of this, it is recommended to chose one and stick with it. I've always used apt-get - partly because that's what the internet uses.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;aptitude&lt;/code&gt; is supposed to be a user level program whereas &lt;code&gt;apt-get&lt;/code&gt; is supposed to be &lt;em&gt;used by&lt;/em&gt; higher level programs like &lt;code&gt;aptitude&lt;/code&gt;. It just turns out &lt;code&gt;apt-get&lt;/code&gt; is easy to use by users so they just use it instead of using the higher level managers like &lt;code&gt;aptitude&lt;/code&gt; and &lt;code&gt;synaptic&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/347904/186134&quot;&gt;Source, Ask Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is it easier? I'd say because it doesn't do as much. It's like the difference between a clean UI and a cluttered UI:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kPxpk.png&quot; width=&quot;325&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/BuV0k.png&quot; width=&quot;325&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;New users are much more likely to want to use this UI ▲ because it's easier to understand and navigate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command line is scary enough when you come from Windows or OS X - the lack of being able to download everything by clicking (which you can (other than &lt;code&gt;ppa&lt;/code&gt;s), but oh so slow) is worrying to a new user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So anything that makes that experience better is going to make them happier.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;apt-get&lt;/code&gt; does have the advantage of being more memory-efficient. This is unlikely to be noticeable for most users; I wasn't really aware of it until I tried to upgrade packages on a full Debian install with 32MB of RAM.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://superuser.com/questions/93437/aptitude-vs-apt-get-which-is-the-recommended-aka-the-right-tool-to-use#comment161204_113994&quot;&gt;Source, Super User&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, Ubuntu ships with &lt;code&gt;apt-get&lt;/code&gt;, and &lt;code&gt;aptitude&lt;/code&gt; avaliable to install. Popularity for &lt;code&gt;aptitude&lt;/code&gt; (red has always been lower than &lt;code&gt;apt&lt;/code&gt; (blue):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9thLP.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this graph for &lt;code&gt;aptitude&lt;/code&gt; vs &lt;code&gt;apt-get&lt;/code&gt; suggests something else:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4xygS.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably just users are getting lazier and not typing &lt;code&gt;-get&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, back to your question: &quot;&lt;em&gt;Are there any reasons not to use it with elementary OS?&lt;/em&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not really - pick one and go with it. &lt;code&gt;apt-get&lt;/code&gt; is the future standard, but as long as &lt;code&gt;aptitude&lt;/code&gt; is avaliable why not use it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, one more article:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Canonical has announced plans to switch all versions of Ubuntu to its new Snappy package manager. The new tool offers the promise of greater stability and security for the system and applications.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Currently, Ubuntu uses the Advanced Packaging Tool (&lt;code&gt;apt&lt;/code&gt;) and the lower-level &lt;code&gt;dpkg&lt;/code&gt; tool to manage packages. They are inherited from Debian and are used on a wide range of distros, including Elementary OS.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.linuxjournal.com/content/more-stable-future-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ccqb2.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.ubuntu.com/cloud/tools/snappy&quot; rel=&quot;nofollow noreferrer&quot;&gt;Image Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-07-01T08:45:33.350" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="92" PostTypeId="2" ParentId="88" CreationDate="2015-07-01T08:39:57.347" Score="6" Body="&lt;p&gt;To install them for all users, you need root access.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm going to assume the fonts are saved in your Downloads folder, in another folder called &quot;fonts&quot;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp -r ~/Downloads/fonts/* /usr/share/fonts/truetype/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then a restart and you should have your font.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-01T08:39:57.347" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="93" PostTypeId="1" AcceptedAnswerId="97" CreationDate="2015-07-01T09:34:25.857" Score="11" ViewCount="2349" Body="&lt;p&gt;How can I monitor which application are using most resources such as RAM and CPU? How do I disable them?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="190" LastEditDate="2015-07-07T07:40:42.847" LastActivityDate="2016-11-27T23:00:28.213" Title="How to check which application are using most resources?" Tags="|monitoring|cpu|processes|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="94" PostTypeId="2" ParentId="93" CreationDate="2015-07-01T09:44:29.507" Score="2" Body="&lt;p&gt;Maybe this &lt;a href=&quot;https://docs.google.com/document/d/1KzzotAAb9L471PO17Iiojq7jmm47ky5ceFNnHu0u5lA/edit&quot; rel=&quot;nofollow&quot;&gt;link&lt;/a&gt; will help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The terminal is capable of showing you running processes via the &lt;code&gt;top&lt;/code&gt; command.&#xA;All you need to do is open a terminal, whether on your desktop or, if things have frozen by pressing &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;  - &lt;kbd&gt;F12&lt;/kbd&gt;, logging in and entering the &lt;code&gt;top&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="155" LastEditorUserId="3757" LastEditDate="2016-04-18T13:10:35.767" LastActivityDate="2016-04-18T13:10:35.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="95" PostTypeId="1" AcceptedAnswerId="100" CreationDate="2015-07-01T09:45:22.427" Score="23" ViewCount="14114" Body="&lt;p&gt;How can I remove old kernels after upgrading to a new version? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is annoying me to have these kernel entries in the Grub boot menu.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="190" LastEditDate="2015-07-01T18:56:15.497" LastActivityDate="2021-12-12T09:11:51.247" Title="How to remove old kernel versions?" Tags="|kernel|updates|" AnswerCount="8" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="96" PostTypeId="1" AcceptedAnswerId="182" CreationDate="2015-07-01T09:47:16.853" Score="4" ViewCount="5576" Body="&lt;p&gt;I frequently receive errors as follows while running &lt;code&gt;apt-get update&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[...] &#xA;gpg: keyblock resource `/etc/apt/trusted.gpg.d/pdfmod-team-ppa.gpg': resource limit &#xA;gpg: keyblock resource `/etc/apt/trusted.gpg.d/rael-gc-scudcloud.gpg': resource limit &#xA;gpg: keyblock resource `/etc/apt/trusted.gpg.d/voldyman-markmywords.gpg': resource limit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above keys are just examples and not limited to those programs. It occurs generically with all software that I added from a PPA.&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="190" LastEditDate="2015-07-02T05:56:21.813" LastActivityDate="2018-10-08T14:56:31.027" Title="How to fix gpg: keyblock resource `/etc/apt/trusted.gpg.d/&lt;key&gt;.gpg': resource limit" Tags="|ppa|gpg|apt|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="97" PostTypeId="2" ParentId="93" CreationDate="2015-07-01T09:50:01.747" Score="19" Body="&lt;h3&gt;Option 1: Install GNOME System Monitor with the Software Center&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open up the Software Center from the Applications menu&lt;/li&gt;&#xA;&lt;li&gt;Search for GNOME System Monitor&lt;/li&gt;&#xA;&lt;li&gt;Select GNOME System Monitor from the results and click install.&lt;/li&gt;&#xA;&lt;li&gt;You can now launch the GNOME System Monitor. It will look something like this:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zaufU.png&quot; alt=&quot;GNOME System Monitor - Resources Tab&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/fQsTG.png&quot; alt=&quot;GNOME System Monitor - Processes Tab&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 2: Install the GNOME System Monitor in the Terminal&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the Terminal with &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Follow the onscreen instructions.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2016-11-27T23:00:28.213" LastActivityDate="2016-11-27T23:00:28.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="98" PostTypeId="2" ParentId="27" CreationDate="2015-07-01T09:55:43.670" Score="12" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the Terminal by holding &lt;kbd&gt;Super&lt;/kbd&gt; and pressing &lt;kbd&gt;T&lt;/kbd&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run this command:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &quot;['Super_L', 'Super_R']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Either revel in the glory of your newfound shortcut, or change back by running: &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &quot;['&amp;lt;Super&amp;gt;space', '&amp;lt;Alt&amp;gt;F2']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="85" LastEditDate="2015-07-14T16:06:44.707" LastActivityDate="2015-07-14T16:06:44.707" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="99" PostTypeId="2" ParentId="33" CreationDate="2015-07-01T10:09:25.217" Score="8" Body="&lt;p&gt;&lt;strong&gt;Guide for Luna:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing Skype, add this PPA which provides a patched &lt;a href=&quot;https://launchpad.net/sni-qt&quot; rel=&quot;nofollow noreferrer&quot;&gt;sni-qt&lt;/a&gt;, and install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:rpeshkov/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then download and install the &lt;a href=&quot;https://github.com/rpeshkov/skype-wrapper&quot; rel=&quot;nofollow noreferrer&quot;&gt;skype-wrapper&lt;/a&gt; icon pack:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget https://github.com/rpeshkov/skype-wrapper/archive/master.zip&#xA;unzip master.zip&#xA;(cd skype-wrapper-master/ &amp;amp;&amp;amp; sudo ./install.sh elementary)&#xA;rm -rf skype-wrapper-master/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restart Skype and enjoy ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZY8Sx.png&quot; alt=&quot;Skype indicator&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="84" LastEditorDisplayName="user3" LastEditDate="2015-08-06T14:26:41.083" LastActivityDate="2015-08-06T14:26:41.083" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="100" PostTypeId="2" ParentId="95" CreationDate="2015-07-01T10:16:05.377" Score="21" Body="&lt;p&gt;It is always recommended to leave the 2 latest versions of the kernel, but to remove other kernel versions I used the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | fgrep linux-image-&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zmRFq.png&quot; alt=&quot;A list of the kernels installed should appear&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Never remove the kernel shown in &lt;code&gt;uname -r&lt;/code&gt; or &lt;code&gt;linux-image-generic-lts-utopic&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally &lt;code&gt;sudo apt-get purge &amp;lt;package names&amp;gt;&lt;/code&gt; for the kernels you want to remove (see screenshot for reference).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then &lt;code&gt;sudo update-grub&lt;/code&gt; to update the Bootloader.&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="19" LastEditDate="2015-07-25T23:25:01.270" LastActivityDate="2015-07-25T23:25:01.270" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="101" PostTypeId="1" AcceptedAnswerId="104" CreationDate="2015-07-01T10:57:54.493" Score="32" ViewCount="11533" Body="&lt;p&gt;What graphical interfaces exist to assist the user in searching for files? &lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-09-01T17:32:34.770" LastActivityDate="2020-02-15T01:57:56.757" Title="Graphical interfaces to search for files?" Tags="|applications|files|search|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="104" PostTypeId="2" ParentId="101" CreationDate="2015-07-01T11:22:47.383" Score="35" Body="&lt;p&gt;I installed gnome-search-tool:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-search-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Create &lt;code&gt;find.contract&lt;/code&gt; in &lt;code&gt;/usr/share/contractor&lt;/code&gt; and add to the entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Search Here&#xA;Description=Find files&#xA;MimeType=inode;application/x-sh;application/x-executable;&#xA;Exec=gnome-search-tool --path=%f %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After these steps, I can use advanced search in any folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TESYT.png&quot; alt=&quot;contractor&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/G3fqT.png&quot; alt=&quot;search tool&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="211" LastEditDate="2015-07-06T03:29:08.947" LastActivityDate="2015-07-06T03:29:08.947" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="105" PostTypeId="5" CreationDate="2015-07-01T12:06:02.540" Score="0" Body="&lt;p&gt;The Bumblebee Project aims to support NVIDIA Optimus technology under Linux. &lt;a href=&quot;http://bumblebee-project.org/&quot; rel=&quot;nofollow&quot;&gt;http://bumblebee-project.org/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-07-01T15:00:52.047" LastActivityDate="2015-07-01T15:00:52.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="106" PostTypeId="4" CreationDate="2015-07-01T12:06:02.540" Score="0" Body="Use this tag for questions relating to bumblebee. Always try updating bumblebee before posting." OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-04-07T17:42:16.837" LastActivityDate="2016-04-07T17:42:16.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="108" PostTypeId="2" ParentId="3" CreationDate="2015-07-01T12:54:56.793" Score="0" Body="&lt;p&gt;Tim has provided the correct answer, but you may find that many things go wrong. I did a fresh install of elementary OS freya this morning and would like to share the errors I came across and how to solve them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problems Inserting the Guest Additions iso &amp;amp; Mounting It&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Problem Description:&lt;/em&gt; After installing elementary in Virtualbox, you may find the screen resolution is tiny. This is a common case across guest OS's in Virtualbox in my experience. To solve this problem, you need to install the Virtualbox Guest Additions in the guest OS (elementary). However, this can be a task in itself, so I've dedicated this section purely to inserting the Guest Additions and mounting it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Solution:&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download the guest additions iso that matches your Virtualbox version. (Download on the &lt;em&gt;guest&lt;/em&gt;, not the host!)&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Find your Virtualbox version.&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Launch Virtualbox in your &lt;em&gt;host&lt;/em&gt; OS&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Help &amp;gt; About Virtualbox...&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Note the version (Mine was 4.3.12)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Navigate to &lt;a href=&quot;http://download.virtualbox.org/virtualbox/&quot; rel=&quot;nofollow&quot;&gt;http://download.virtualbox.org/virtualbox/&lt;/a&gt; using Midori and select the folder that matches your version number. (Again, mine was 4.3.12)&lt;/li&gt;&#xA;&lt;li&gt;Look for the file called VBoxGuestAdditions_X.X.XX.iso (Replacing the X's with your version number) and download it. (Again, make sure you are downloading it to your &lt;em&gt;guest&lt;/em&gt;, not the host!)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount the iso&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open a terminal in elementary&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Applications&lt;/code&gt; in the upper left and search for &quot;Terminal&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run the following commands:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;cd ~/Downloads/&#xA;ls&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You should see VBoxGuestAdditions_X.X.XX.iso. If not, find out where your download went.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /mnt/VBGA/&#xA;sudo mount VBoxGuestAdditions_X.X.XX.iso /mnt/VBGA/&#xA;cd /mnt/VBGA/&#xA;sudo ./VBoxLinuxAdditions.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now we have reached where Tim had us before. However, sometimes the installation doesn't simply go smoothly. I encountered an error during the install, and this is how I fixed it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Troubleshooting Guest Additions Install&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first step after installing a new linux system should always be to update. Run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now that we're updated, you may need to install the following if you're getting an error regarding modules or missing headers.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install module-assistant&#xA;sudo m-a prepare&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running that last command, I was able to do &lt;code&gt;$ sudo ./VBoxLinuxAdditions.run&lt;/code&gt; and successfully complete the install. The shared folders did &lt;em&gt;not&lt;/em&gt; install correctly, and that is another issue that I cannot help you with at this time. However, the screen resolution &lt;em&gt;does&lt;/em&gt; get fixed and you should be able to use elementary at full resolution. :)&lt;/p&gt;&#xA;" OwnerUserId="85" LastEditorDisplayName="user3" LastEditDate="2015-07-01T16:03:43.117" LastActivityDate="2015-07-01T16:03:43.117" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="109" PostTypeId="1" CreationDate="2015-07-01T13:39:57.223" Score="2" ViewCount="4507" Body="&lt;p&gt;I want to import a OpenVPN-Config or create a new one. I don't want to write a configuration file manually. Is there a configurator application that can help me?&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="190" LastEditDate="2015-07-01T22:17:19.577" LastActivityDate="2017-10-23T10:55:35.407" Title="Interface to configure OpenVPN" Tags="|openvpn|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="110" PostTypeId="2" ParentId="109" CreationDate="2015-07-01T13:39:57.223" Score="2" Body="&lt;p&gt;You have to install OpenVPN and the Configuration Interface.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install network-manager-openvpn-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can import or create new Configurations like for PPTP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://eos-snippets.blogspot.de/2013/10/vpnbook-free-vpn.html&quot; rel=&quot;nofollow&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorDisplayName="user3" LastEditDate="2015-07-02T09:27:26.400" LastActivityDate="2015-07-02T09:27:26.400" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="111" PostTypeId="1" AcceptedAnswerId="113" CreationDate="2015-07-01T13:53:40.893" Score="9" ViewCount="10991" Body="&lt;p&gt;Why doesn't elementary OS include an office suite by default? &#xA;You can find a reference to the issue &lt;a href=&quot;http://itsfoss.com/top-ten-installing-elementary-os-luna/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Its already over 700 MB so why don't they add a another 100 MBs and provide an office suite such as Libre Office?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Are they not happy to the interface of the office suites that are there in the market, (suggesting they are building their own)?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="179" LastEditorUserId="45" LastEditDate="2015-07-14T02:39:15.450" LastActivityDate="2015-07-14T02:39:15.450" Title="Why doesn't elementary OS include an Office suite?" Tags="|applications|office|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="112" PostTypeId="2" ParentId="111" CreationDate="2015-07-01T14:04:21.507" Score="8" Body="&lt;p&gt;elementary's policy is to ship default apps that comply with their &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot; rel=&quot;nofollow&quot;&gt;design guidelines&lt;/a&gt;, which integrate with the desktop environment in the smoothest possible way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;None of the office suites out there - and certainly not Libre Office - do that, so it only makes sense not to include any office application by default and let the users free to install the one that best suits their needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Developing their own office suite is not something which can be accomplished in the foreseeable future, since that would take a lot more workforce that they can currently afford.&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:32:43.910" LastActivityDate="2015-07-05T15:32:43.910" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="113" PostTypeId="2" ParentId="111" CreationDate="2015-07-01T14:38:46.647" Score="20" Body="&lt;h1&gt;Current Stance&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The official stance currently that they don't really need a full suite themselves, nor do they want to ship an office suite that isn't theirs. Until then, there are several third party options (see below). For my personal opinions, taking the near-ubiquitous Microsoft Office as an example, it comes with:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Word&lt;/li&gt;&#xA;&lt;li&gt;Excel&lt;/li&gt;&#xA;&lt;li&gt;PowerPoint&lt;/li&gt;&#xA;&lt;li&gt;OneNote&lt;/li&gt;&#xA;&lt;li&gt;Outlook&lt;/li&gt;&#xA;&lt;li&gt;Publisher&lt;/li&gt;&#xA;&lt;li&gt;Access&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Each of these require individual analysis, so let's get to it.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Word&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The writing application is probably the most conventional piece of software, and yet surprisingly rarely used. Simple documents are written occasionally, but not regularly enough that it was a major issue this cycle, although it has been looked at by the community (see below), the issue of compatibility (which permeates this question) will no doubt rear its ugly head.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Excel&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Spreadsheets are commonly used in the workplace, but far less at home (unless you log every transaction you make, like some kind of &lt;em&gt;weirdo&lt;/em&gt;), and elementary is definitely not targeted at the business market right now. Definitely not a priority.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;PowerPoint&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Another predominantly business application, and certainly something home users (if not everyone, who likes those meetings?) could do without.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;OneNote&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I'm not entirely sure what OneNote does, but it isn't used on any of the hundreds of machines I administer. It seems to be searchable sticky notes, and it's been opened 3 times by people so far this year, 2 were auto-launching at startup, and one was because they were curious what it did.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Outlook&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I have two things to say about this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The only use for desktop mail as far as I can tell is for reading or composing (but not sending) while offline. As we rapidly move towards always-online (I personally am very rarely without an internet connection, and certainly don't want to be composing emails during those times), they become more and more defunct.&lt;/li&gt;&#xA;&lt;li&gt;We have Geary for this, a technically-third-party-but-built-with-elementary-in-mind piece of software.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;Publisher&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Yet another &quot;business&quot; application, back in the days where you needed to design leaflets and posters, I think this is mostly a bygone as well, plus extremely specialist, speaking of which..&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Access&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Access is a format for what is effectively a proprietary version of SQLite, a is a system often employed for quick-and-easy databases that rapidly move into multi-user territory that it is simply not designed for. A poorly defined piece of technology is worse that a buggy piece of technology, and most users will have no user for this. Microsoft do not even include this in most Microsoft Office versions.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Alternatives&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://home.office.com/&quot; rel=&quot;noreferrer&quot;&gt;Microsoft Office Online&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Stable&lt;/li&gt;&#xA;&lt;li&gt;Proprietary&lt;/li&gt;&#xA;&lt;li&gt;Free +&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Many people seem not to know this, but Microsoft provide free online versions that do almost as much as local ones do, notably lacking macros but not much else.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Paid upgrades and subscriptions available. Requires a Microsoft account.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://drive.google.com/&quot; rel=&quot;noreferrer&quot;&gt;Google Drive&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Stable&lt;/li&gt;&#xA;&lt;li&gt;Proprietary&lt;/li&gt;&#xA;&lt;li&gt;Free +&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Google provide a wide array of tools for working with documents, spreadsheets, and slideshows and support converting to and from Microsoft Office format, and is now being recommended by some universities. A major upside is you don't need to install or even save things, it's all just online.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Google Apps is paid and provides more features, but nothing noticeable and it doesn't bug you to upgrade.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://www.libreoffice.org/&quot; rel=&quot;noreferrer&quot;&gt;LibreOffice&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Stable&lt;/li&gt;&#xA;&lt;li&gt;Open-Source&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;LibreOffice has come to be the de-facto option for open-source office tools, and for very good reason. If you want offline software, with the option of theming it's way into elementary, this is the one for you.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;http://ksosoft.com/product/office-2013-linux.html&quot; rel=&quot;noreferrer&quot;&gt;Kingsoft Office&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Unstable&lt;/li&gt;&#xA;&lt;li&gt;Proprietary&lt;/li&gt;&#xA;&lt;li&gt;Free&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Kingsoft Office 2013 is very Microsoft Office like, but alphas are available for native linux use and provide reasonably good compatibility, but very little elementary tie-in.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Writer&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Unstable&lt;/li&gt;&#xA;&lt;li&gt;Open-Source&lt;/li&gt;&#xA;&lt;li&gt;Designed for elementary OS&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There is a great &lt;a href=&quot;http://spiceofdesign.deviantart.com/art/Writer-Concept-351501580?q=favby%3Aelementary-art%2F45954099&amp;amp;qo=2&quot; rel=&quot;noreferrer&quot;&gt;mockup for a Writer on Deviantart by spiceofdesign&lt;/a&gt; that is absolutely gorgeous, and did have &lt;a href=&quot;https://launchpad.net/writer&quot; rel=&quot;noreferrer&quot;&gt;some code written&lt;/a&gt; as a third-party application, but was never official. There's been nothing done there for a couple of months, but it seems to have a significant amount of the groundwork laid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kVybO.png&quot; alt=&quot;Writer Mockup&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="18" LastEditDate="2015-07-02T14:04:06.193" LastActivityDate="2015-07-02T14:04:06.193" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="115" PostTypeId="1" AcceptedAnswerId="116" CreationDate="2015-07-01T15:33:37.140" Score="3" ViewCount="481" Body="&lt;p&gt;How can I set up a simple, always-on development environment with PHP and Nginx, like the one configued in &lt;a href=&quot;https://github.com/elementary/mvp&quot; rel=&quot;nofollow&quot;&gt;elementary/mvp&lt;/a&gt;?&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-08-02T10:42:51.323" LastActivityDate="2015-08-02T10:42:51.323" Title="How can I set up a local LEP or LEMP stack as a web development environment?" Tags="|web-development|php|lemp|nginx|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="116" PostTypeId="2" ParentId="115" CreationDate="2015-07-01T15:33:37.140" Score="2" Body="&lt;h1&gt;Step 1: Installation&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The following commands both add repositories for the latest stack software, update and upgrade yourself, and then install the required system.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:nginx/stable &amp;amp;&amp;amp;&#xA;sudo apt-add-repository ppa:ondrej/nginx &amp;amp;&amp;amp;&#xA;sudo apt-add-repository ppa:ondrej/php5-5.6 &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get dist-upgrade &amp;amp;&amp;amp;&#xA;sudo apt-get install nginx php5-fpm php5-curl php5-geoip php5-json php5-mcrypt php5-memcache&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: To turn this into a LEMP stack, just install &lt;a href=&quot;https://downloads.mariadb.org/mariadb/repositories/#distro=Ubuntu&amp;amp;distro_release=trusty--ubuntu_trusty&quot; rel=&quot;nofollow&quot;&gt;MariaDB&lt;/a&gt; as if you were using Ubuntu 14.04 Trusty, and then &lt;code&gt;php5-mysql&lt;/code&gt; and ass &lt;code&gt;phpmyadmin&lt;/code&gt; to suit.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Step 2: Configuration&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/nginx/sites-enabled/sitename.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Paste some configuration in, modifying the root, include and error_log paths.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;server {&#xA;    listen 80;&#xA;    server_name local.localtest.me;&#xA;    root /path/to/site;&#xA;    error_log /path/to/site_error.log;&#xA;    access_log off;&#xA;    autoindex on;&#xA;    index index.php index.html;&#xA;&#xA;    location / {&#xA;        try_files $uri $uri.html $uri/ @extensionless-php;&#xA;    }&#xA;&#xA;    location @extensionless-php {&#xA;        rewrite ^(.*)$ $1.php last;&#xA;    }&#xA;&#xA;    location ~ \.php$ {&#xA;        include /etc/nginx/fastcgi_params;&#xA;        fastcgi_pass unix:/var/run/php5-fpm.sock;&#xA;        fastcgi_index index.php;&#xA;        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;&#xA;        fastcgi_intercept_errors on;&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can test the configuration with Nginx.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nginx -t&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now we just need to restart the service.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo service nginx restart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Step 3: Use&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Finally, navigate to &lt;a href=&quot;http://local.localtest.me/&quot; rel=&quot;nofollow&quot;&gt;local.localtest.me&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;References:&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/mvp/blob/master/CONTRIBUTE.md&quot; rel=&quot;nofollow&quot;&gt;https://github.com/elementary/mvp/blob/master/CONTRIBUTE.md&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-01T15:33:37.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="117" PostTypeId="2" ParentId="95" CreationDate="2015-07-01T18:24:44.610" Score="13" Body="&lt;p&gt;You can use this one-liner to automatically clean up all old kernels (&lt;strong&gt;make sure to restart the computer before doing this if you have just updated the kernel&lt;/strong&gt;):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge $( dpkg --list | grep -P -o &quot;linux-(headers|image)-\d\S+&quot; | grep -v $(uname -r | grep -P -o &quot;.+\d&quot;) )&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it does is uninstall (&lt;code&gt;apt purge&lt;/code&gt;) the installed packages (&lt;code&gt;dpkg --list&lt;/code&gt;) whose names match &quot;linux-headers-[number]&quot; or &quot;linux-image-[number]&quot; (&lt;code&gt;grep -P -o &quot;linux-(headers|image)-\d\S+&quot;&lt;/code&gt;), except (&lt;code&gt;grep -v&lt;/code&gt;) those corresponding to the current kernel version (&lt;code&gt;uname -r | grep -P -o &quot;.+\d&quot;&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Sources:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.commandlinefu.com/commands/view/5813/remove-all-unused-kernels-with-apt-ge&quot; rel=&quot;nofollow noreferrer&quot;&gt;CommandLineFu.com&lt;/a&gt; - the original inspiration&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/176322/removing-old-kernel-entries-in-grub#answer-196437&quot;&gt;Ask Ubuntu&lt;/a&gt; - using apt’s &quot;purge&quot; rather than &quot;remove&quot;)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/18804/what-do-the-various-dpkg-flags-like-ii-rc-mean&quot;&gt;Ask Ubuntu&lt;/a&gt; - ensuring the entries returned could be safely removed&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://stackoverflow.com/questions/6901171/is-d-not-supported-by-greps-basic-expressions&quot;&gt;Stack Overflow&lt;/a&gt; - using PCRE in &lt;code&gt;grep&lt;/code&gt; (&lt;code&gt;\d&lt;/code&gt;, &lt;code&gt;\S&lt;/code&gt;, etc) and using the &lt;code&gt;-P&lt;/code&gt; option&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://superuser.com/questions/274981/return-only-pattern-matched-string-from-grep&quot;&gt;Super User&lt;/a&gt; - using &lt;code&gt;-o&lt;/code&gt; to make &lt;code&gt;grep&lt;/code&gt; return only the matched content&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="84" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2017-02-28T17:05:47.190" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="118" PostTypeId="5" CreationDate="2015-07-01T20:00:47.877" Score="0" Body="&lt;p&gt;Freya is  third stable version of elementary OS which has its own desktop environment, called Pantheon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon comes with its own set of applications: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Slingshot (application launcher),&lt;br&gt;&#xA;Music (Noise),&lt;br&gt;&#xA;Videos (Audacious),&lt;br&gt;&#xA;Midori (web browser),&lt;br&gt;&#xA;Geary (email management software),&lt;br&gt;&#xA;Pantheon Terminal (terminal emulator)   and&lt;br&gt;&#xA;Pantheon Files (file browser).&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="26" LastEditDate="2016-03-09T22:14:44.453" LastActivityDate="2016-03-09T22:14:44.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="119" PostTypeId="4" CreationDate="2015-07-01T20:00:47.877" Score="0" Body="Questions specific to elementary OS 0.3, codenamed &quot;Freya&quot;. Freya has been superseded by Loki." OwnerUserId="84" LastEditorUserId="26" LastEditDate="2016-10-02T16:05:30.037" LastActivityDate="2016-10-02T16:05:30.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="120" PostTypeId="2" ParentId="81" CreationDate="2015-07-02T02:34:39.640" Score="13" Body="&lt;p&gt;Just copy your wallpaper to &lt;code&gt;/usr/share/backgrounds&lt;/code&gt; (you're going to need root privileges to do so) and then select your wallpaper from System Settings -Desktop - Wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That &lt;strong&gt;&lt;em&gt;should&lt;/em&gt;&lt;/strong&gt; also change the login background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact there is a bug where the login picture cannot be changed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1391716&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1391716&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;also:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1324373&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-greeter/+bug/1324373&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case the new images copied into the usr/share/backgroounds may not even be seen from Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Files as administrator&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the image file in &lt;code&gt;/usr/share/backgrounds&lt;/code&gt; and open its Properties&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change permissions to &lt;code&gt;644&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/gWg6e.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use System Settings -Desktop - Wallpaper as normal&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="138" LastEditorDisplayName="user170" LastEditDate="2015-07-12T18:50:50.793" LastActivityDate="2015-07-12T18:50:50.793" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="121" PostTypeId="2" ParentId="63" CreationDate="2015-07-02T04:58:39.523" Score="6" Body="&lt;p&gt;As Daniel said, &lt;a href=&quot;https://launchpad.net/libpwquality&quot;&gt;&lt;code&gt;libpwquality&lt;/code&gt;&lt;/a&gt; is used. Looking in &lt;a href=&quot;https://bazaar.launchpad.net/~registry/libpwquality/default/view/head:/src/check.c&quot;&gt;source code&lt;/a&gt;, you can see several checks, quality settings - threshholds -  will be configured in a configuration file:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;palindromes &lt;/li&gt;&#xA;&lt;li&gt;simplicity (too little number of digits, lower chars, upper chars and special chars)&lt;/li&gt;&#xA;&lt;li&gt;simplicity (too little different character types - digits, lower chars, upper chars and special chars)&lt;/li&gt;&#xA;&lt;li&gt;Consecutivity (too many repeated characters)&lt;/li&gt;&#xA;&lt;li&gt;similarity to user id or user full name&lt;/li&gt;&#xA;&lt;li&gt;wordlist (bad words from config file)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There are checks for comparing old and new passwords, too.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-07-02T04:58:39.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="122" PostTypeId="1" AcceptedAnswerId="124" CreationDate="2015-07-02T08:43:29.890" Score="7" ViewCount="634" Body="&lt;p&gt;When I search for a document or picture in Files I get a drop-down list of things that match the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/A7lUn.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The list goes away if I click and multiple files cannot be selected or otherwise manipulated. I want to view the results in a separate window as shown below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7Vy3f.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so that I can delete a few of the selected or move them to another folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I achieve it?&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorDisplayName="user170" LastEditDate="2016-12-05T10:44:49.747" LastActivityDate="2016-12-05T10:44:49.747" Title="Pantheon Files: Search results in window instead of drop-down list?" Tags="|pantheon-files|search|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="123" PostTypeId="1" AcceptedAnswerId="179" CreationDate="2015-07-02T09:39:41.783" Score="2" ViewCount="2791" Body="&lt;p&gt;I'm running Freya on my system, though I never did a clean install of the stable, I always just kept updating the beta.&#xA;I don't get any notification badge on plank, except for Geary, but I know for a fact that Thunderbird and Update Center are supposed to work, too. Maybe it's an issue related to non-default apps then.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I enable these badges?&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-07-02T10:28:01.170" LastActivityDate="2015-07-03T10:12:30.687" Title="How do I enable notification badges on plank?" Tags="|plank|notification-badge|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="124" PostTypeId="2" ParentId="122" CreationDate="2015-07-02T09:46:37.733" Score="6" Body="&lt;p&gt;This is currently not possible. You may report a &quot;wishlist&quot;-priority bug to launchpad for pantheon-files so that a designer may consider adding this option, even though it is probably unlikely unless you can make a good point about usability.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After internal discussions we put a strong limit on the total number of search results, mainly because you are expected to refine your search terms if you get a too large number of results, instead of going through a big list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are programs dedicated to searching like the gnome-search-tool or recoll for full text search, if you wish to have a different representation of search results it may be best to try one of those.&lt;/p&gt;&#xA;" OwnerUserId="83" LastActivityDate="2015-07-02T09:46:37.733" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="125" PostTypeId="5" CreationDate="2015-07-02T10:15:44.593" Score="0" Body="" OwnerUserId="45" LastEditorUserId="26" LastEditDate="2015-09-03T10:22:00.610" LastActivityDate="2015-09-03T10:22:00.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="126" PostTypeId="4" CreationDate="2015-07-02T10:15:44.593" Score="0" Body="Questions about the files on elementary. Consider using pantheon-files for the file manager application." OwnerDisplayName="user3" LastEditorUserId="26" LastEditDate="2015-09-03T10:22:00.610" LastActivityDate="2015-09-03T10:22:00.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="127" PostTypeId="5" CreationDate="2015-07-02T10:17:34.677" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-02T10:17:34.677" LastActivityDate="2015-07-02T10:17:34.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="128" PostTypeId="4" CreationDate="2015-07-02T10:17:34.677" Score="0" Body="Questions about software that runs on elementary OS. This includes the default applications like Files and Mail, and also apps from the software center and those downloaded manually." OwnerDisplayName="user3" LastEditorUserId="84" LastEditorDisplayName="user3" LastEditDate="2015-08-06T20:41:41.860" LastActivityDate="2015-08-06T20:41:41.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="129" PostTypeId="5" CreationDate="2015-07-02T10:20:07.907" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-02T10:20:07.907" LastActivityDate="2015-07-02T10:20:07.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="130" PostTypeId="4" CreationDate="2015-07-02T10:20:07.907" Score="0" Body="Questions about installing software, either as binaries or from source code, as well as using the Software Center." OwnerDisplayName="user3" LastEditorUserId="84" LastEditorDisplayName="user3" LastEditDate="2015-08-07T18:05:57.637" LastActivityDate="2015-08-07T18:05:57.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="131" PostTypeId="5" CreationDate="2015-07-02T10:21:08.997" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-02T10:21:08.997" LastActivityDate="2015-07-02T10:21:08.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="132" PostTypeId="4" CreationDate="2015-07-02T10:21:08.997" Score="0" Body="This tag is for web developers seeking support for any web development software, for example Apache and PHP.&#xD;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-02T14:06:38.710" LastActivityDate="2015-07-02T14:06:38.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="133" PostTypeId="1" AcceptedAnswerId="134" CreationDate="2015-07-02T10:23:48.323" Score="5" ViewCount="207" Body="&lt;p&gt;When I right click on Files in the Dock, I can chose to open &quot;New Windows As Administrator&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/GMkKm.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What command does this execute? Is it &lt;code&gt;sudo -i pantheon-files&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:26:22.457" LastActivityDate="2015-09-03T10:26:22.457" Title="What command is executed when I click &quot;open as Administrator&quot; in Files from the Dock?" Tags="|plank|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="134" PostTypeId="2" ParentId="133" CreationDate="2015-07-02T11:07:51.803" Score="13" Body="&lt;p&gt;It is &lt;code&gt;pantheon-files-pkexec&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find it in &lt;code&gt;/usr/share/applications/pantheon-files.desktop&lt;/code&gt;. It looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Root Shortcut Group]&#xA;Name=New Window As _Administrator&#xA;Exec=pantheon-files-pkexec&#xA;TargetEnvironment=Unity&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="208" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:17:47.100" LastActivityDate="2015-07-05T15:17:47.100" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="135" PostTypeId="1" AcceptedAnswerId="199" CreationDate="2015-07-02T11:17:06.907" Score="11" ViewCount="2675" Body="&lt;p&gt;When I take a window screenshot, it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/dQ0Th.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make it look like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yd9kR.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="160" LastEditDate="2016-12-17T17:36:28.613" LastActivityDate="2016-12-17T17:36:28.613" Title="How can I take a screenshot of a window without the background?" Tags="|release-freya|screenshot|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="136" PostTypeId="2" ParentId="135" CreationDate="2015-07-02T11:39:02.153" Score="-1" Body="&lt;p&gt;You can try one of these solutions :&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Use &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;PrntScrn&lt;/kbd&gt; &lt;em&gt;instead&lt;/em&gt; of &lt;kbd&gt;PrntScrn&lt;/kbd&gt; button (using your keyboard)&lt;/p&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Use an application like &lt;strong&gt;Shutter&lt;/strong&gt; or the default screenshot application&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="191" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-19T18:49:53.007" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="137" PostTypeId="2" ParentId="135" CreationDate="2015-07-02T12:11:40.540" Score="12" Body="&lt;p&gt;You can make beautiful screenshots of windows with shadow using &lt;a href=&quot;https://launchpad.net/screenshot-tool&quot; rel=&quot;nofollow noreferrer&quot;&gt;screenshot-tool&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add this PPA and install package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get install screenshot-tool&#xA;sudo apt-add-repository -r ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/TdQCr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Supported only GTK3+ apps.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-11-08T19:50:33.797" LastActivityDate="2015-11-08T19:50:33.797" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="138" PostTypeId="1" AcceptedAnswerId="143" CreationDate="2015-07-02T12:16:44.283" Score="10" ViewCount="1605" Body="&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Apps/Builder&quot;&gt;Builder&lt;/a&gt; is a IDE for gtk development, how can I install it on elementary?&lt;/p&gt;&#xA;" OwnerUserId="38" LastActivityDate="2016-12-30T09:25:19.140" Title="How can I install Gnome Builder IDE?" Tags="|ide|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="139" PostTypeId="1" AcceptedAnswerId="142" CreationDate="2015-07-02T12:20:40.247" Score="7" ViewCount="413" Body="&lt;p&gt;After reading &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/135/how-can-i-take-a-screenshot-of-a-window-without-the-background&quot;&gt;this question&lt;/a&gt;, I attempted to launch the default screenshot tool via the terminal (for debugging) but I couldn't find out what the name was.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried with &lt;code&gt;screen*&lt;/code&gt; but nothing came up.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="3757" LastEditDate="2016-04-25T02:09:29.983" LastActivityDate="2016-04-25T02:09:29.983" Title="Name of default screenshot tool in Freya?" Tags="|release-freya|screenshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="141" PostTypeId="2" ParentId="78" CreationDate="2015-07-02T12:36:31.117" Score="12" Body="&lt;p&gt;Please keep in mind I'm no expert: I gathered some information about closed source software, but I cannot guarantee completeness or even truth.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;GLib, GTK+, Granite and Vala are licensed under the LPGL. &lt;a href=&quot;https://tldrlegal.com/license/gnu-lesser-general-public-license-v3-%28lgpl-3%29&quot; rel=&quot;noreferrer&quot;&gt;Here is the TL;DR&lt;/a&gt; for this license. When your application is dynamically linked to these libraries (which is default when you build an application for elementary OS / Linux in general), you do not have to disclose your source code:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Derivative works (including modifications or anything statically linked to the library) can only be redistributed under LGPL, &lt;strong&gt;but applications that use the library don't have to be&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;While the basic libraries I mentioned (which are necessary for creating an elementary OS app) are licensed under LPGL, others might not. So if you are looking for advanced functionality in additional libraries, you should be really careful about the GPL license. The GPL itself requires you to open your source code for every owner of your application and it &quot;&lt;a href=&quot;https://en.wikipedia.org/wiki/Viral_license&quot; rel=&quot;noreferrer&quot;&gt;infects&lt;/a&gt;&quot; software which is using it. So you'd have to release your app under the GPL as well.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Some GPL-licensed projects do provide a &lt;a href=&quot;https://en.wikipedia.org/wiki/GPL_linking_exception&quot; rel=&quot;noreferrer&quot;&gt;GPL linking exception&lt;/a&gt;. So, if in doubt, message the developers and ask about their stance.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;One thing you should keep in mind though: Linux users are used to open source software. While the closed source state of some software is accepted / tolerated for various reasons (for example nVidia/AMD drivers or Google Chrome), people might reject the idea of a &quot;simple&quot; application being closed source.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorDisplayName="user3" LastEditDate="2015-07-09T10:26:10.067" LastActivityDate="2015-07-09T10:26:10.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="142" PostTypeId="2" ParentId="139" CreationDate="2015-07-02T12:40:20.710" Score="10" Body="&lt;p&gt;The command ran by clicking the screenshot application's icon is &lt;code&gt;gnome-screenshot --interactive&lt;/code&gt; (&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/elementaryos/gnome-screenshot-freya/view/head:/src/gnome-screenshot.desktop.in#L5&quot;&gt;Source&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-02T12:40:20.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="143" PostTypeId="2" ParentId="138" CreationDate="2015-07-02T12:49:50.813" Score="8" Body="&lt;p&gt;You can not install Gnome Builder on elementary, because it requires GTK 3.16, while elementary uses GTK 3.14.&lt;/p&gt;&#xA;" OwnerUserId="211" LastEditorDisplayName="user3" LastEditDate="2015-07-08T12:55:45.210" LastActivityDate="2015-07-08T12:55:45.210" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="144" PostTypeId="2" ParentId="95" CreationDate="2015-07-02T13:22:20.520" Score="8" Body="&lt;p&gt;You can simply run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to &quot;remove all unused packages&quot; which includes older kernels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should test a reboot before to be shure the new kernel works!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is more secure to leave the 2 latest versions as John pointed out in his answer.&lt;/p&gt;&#xA;" OwnerUserId="115" LastActivityDate="2015-07-02T13:22:20.520" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="145" PostTypeId="1" AcceptedAnswerId="151" CreationDate="2015-07-02T13:28:09.527" Score="9" ViewCount="4921" Body="&lt;p&gt;The default scrollbars do not properly integrate into the elementary OS design.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WCKHJ.png&quot; alt=&quot;Default Chrome scrollbars&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="160" LastEditorDisplayName="user3" LastEditDate="2015-07-22T17:38:34.057" LastActivityDate="2015-07-22T17:38:34.057" Title="How can I change Chrome scrollbars to the thin scrollbars?" Tags="|scrollbars|google-chrome|chromium|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="146" PostTypeId="2" ParentId="145" CreationDate="2015-07-02T13:36:06.700" Score="13" Body="&lt;p&gt;Install &lt;a href=&quot;https://chrome.google.com/webstore/detail/elementary-freya-scrollba/dddhhloahgkhcaipmkfjngdalegmcomm&quot; rel=&quot;nofollow noreferrer&quot;&gt;this extension&lt;/a&gt; from Chrome Web Store.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you can install &lt;a href=&quot;https://chrome.google.com/webstore/detail/elementary-os-03-freya-ch/faohdknlfnjkeaphndahbpabllhaodnl&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; theme for better integration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After all the above steps Chrome looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uZTtC.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:27:35.437" LastActivityDate="2015-07-05T15:27:35.437" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="147" PostTypeId="1" CreationDate="2015-07-02T14:06:52.807" Score="2" ViewCount="142" Body="&lt;p&gt;I'm trying to apply &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/how-can-i-fix-the-fuzzy-google-chrome-icon-that-appears-in-plank&quot;&gt;this&lt;/a&gt; fix for my Photoshop,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to find the file to edit at &lt;code&gt;~/.local/share/applications/wine-extension-psd.desktop&lt;/code&gt; with this content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Adobe Photoshop CS6&#xA;MimeType=image/vnd.adobe.photoshop;&#xA;Exec=env WINEPREFIX=&quot;/home/ian/.wine&quot; wine start /ProgIDOpen Photoshop.Image.13 %f&#xA;NoDisplay=true&#xA;StartupNotify=true&#xA;Icon=6B73_Photoshop.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I made this a question of its own because the linked question helped me until a certain extend, I couldn't figure how what would be equivalent to &lt;code&gt;StartupWMClass=Google-chrome-stable&lt;/code&gt; here. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-02T18:44:24.427" Title="How to fix double icons on plank (specifically Photoshop in wine)" Tags="|plank|" AnswerCount="0" CommentCount="5" ClosedDate="2015-07-02T18:24:47.587" ContentLicense="CC BY-SA 3.0" />
  <row Id="148" PostTypeId="1" AcceptedAnswerId="149" CreationDate="2015-07-02T14:23:06.587" Score="14" ViewCount="2166" Body="&lt;p&gt;How can I disable this popup?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/U4Rwl.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't find any settings.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-05T15:05:26.423" Title="How do I disable the sudo paste warning?" Tags="|command-line|root|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="149" PostTypeId="2" ParentId="148" CreationDate="2015-07-02T14:50:37.587" Score="21" Body="&lt;p&gt;Run this command in terminal to disable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings unsafe-paste-alert false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then this to re-enable it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings unsafe-paste-alert true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="211" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:04:16.340" LastActivityDate="2015-07-05T15:04:16.340" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="150" PostTypeId="1" CreationDate="2015-07-02T15:24:35.663" Score="7" ViewCount="2976" Body="&lt;p&gt;I use Scratch for programming in elementary OS, and then Terminal to run it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While this works fairly well, I would like to know which IDEs are available for elementary OS? What are the drawbacks and advantages?&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Please post your suggestions one per answer as a Community Wiki post.&lt;/h3&gt;&#xA;" OwnerUserId="34" LastEditorDisplayName="user3" LastEditDate="2015-07-02T17:54:41.550" LastActivityDate="2016-04-15T01:53:37.630" Title="What IDE's are avaliable for programming in elementary?" Tags="|programming|ide|" AnswerCount="2" CommentCount="7" ClosedDate="2015-07-02T18:30:42.727" ContentLicense="CC BY-SA 3.0" />
  <row Id="151" PostTypeId="2" ParentId="145" CreationDate="2015-07-02T15:38:43.543" Score="12" Body="&lt;p&gt;You can get thin overlay scroll bars in Chrome by setting the &lt;code&gt;#overlay-scrollbars&lt;/code&gt; flag to enabled. Go to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chrome://flags/#overlay-scrollbars&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="42" LastEditorDisplayName="user3" LastEditDate="2015-07-02T15:41:55.440" LastActivityDate="2015-07-02T15:41:55.440" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="153" PostTypeId="1" AcceptedAnswerId="156" CreationDate="2015-07-02T15:46:57.953" Score="7" ViewCount="1669" Body="&lt;p&gt;When I click with the middle button of the mouse on a window, it goes to the bottom of the stack, and two clicks on the window bar maximize it. Can we change that? or even disable?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;some background:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the middle click to paste content on a new tab on chrome, middle clicking the new tab button, but it's easy to miss it and put your browser on the bottom of the stack, it is annoying&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="84" LastEditDate="2015-07-03T08:56:02.800" LastActivityDate="2015-07-03T08:56:02.800" Title="How to change the window manager's mouse click actions?" Tags="|mouse|gala|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="154" PostTypeId="2" ParentId="150" CreationDate="2015-07-02T15:50:51.830" Score="6" Body="&lt;p&gt;elementary OS developers use a text editor by personal preferences. mine is sublime text with of course terminal to build. This gives developer the advantages to know also about the build process and what is used like libraries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also this : &lt;a href=&quot;https://github.com/PerfectCarl/ValaBinding&quot; rel=&quot;nofollow&quot;&gt;https://github.com/PerfectCarl/ValaBinding&lt;/a&gt;&#xA;this is a vala binding for monodevelop IDE. i haven't tried it but you could if you want.&lt;/p&gt;&#xA;" OwnerUserId="94" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-15T01:53:37.630" LastActivityDate="2016-04-15T01:53:37.630" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="156" PostTypeId="2" ParentId="153" CreationDate="2015-07-02T15:57:50.873" Score="11" Body="&lt;p&gt;You can use &lt;code&gt;gsettings&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-middle-click-titlebar 'none'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Will disable the feature. To re-enable, use this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-middle-click-titlebar 'lower'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;These are the options you can set it to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;toggle-shade&lt;/code&gt;, which will shade/unshade the window (roll up / down)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;toggle-maximize&lt;/code&gt; which will maximise/unmaximise the window&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;toggle-maximize-horizontally&lt;/code&gt; and &lt;code&gt;toggle-maximize-vertically&lt;/code&gt; which will maximise/unmaximise the window in that direction only&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;minimize&lt;/code&gt; which will minimise the window&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;shade&lt;/code&gt; which will roll the window up&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;menu&lt;/code&gt; which will display the window menu (default for right click)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;lower&lt;/code&gt; which will put the window behind all the others&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;none&lt;/code&gt; which will not do anything, and effectively disables this action.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-02T16:03:24.077" LastActivityDate="2015-07-02T16:03:24.077" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="158" PostTypeId="2" ParentId="150" CreationDate="2015-07-02T17:43:26.340" Score="5" Body="&lt;h2&gt;&lt;a href=&quot;https://atom.io&quot; rel=&quot;noreferrer&quot;&gt;Atom&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Atom is a text editor that's modern, approachable, yet hackable to the core—a tool you can customize to do anything but also use productively without ever touching a config file.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h3&gt;Features:&lt;/h3&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Built on web technologies for easy hacking of the editor itself&lt;/li&gt;&#xA;  &lt;li&gt;Wide array of packages to extend functionality&lt;/li&gt;&#xA;  &lt;li&gt;Theming support&lt;/li&gt;&#xA;  &lt;li&gt;Built-in git-support&lt;/li&gt;&#xA;  &lt;li&gt;Multiple panes (split view), file system browser, autocompletion&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/atom/atom/releases/tag/v1.0.0&quot; rel=&quot;noreferrer&quot;&gt;Download a &lt;code&gt;.deb&lt;/code&gt; file here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://atom.io/themes/elementary-light-ui&quot; rel=&quot;noreferrer&quot;&gt;There is also theme available to make Atom fit in with elementary.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorDisplayName="user3" LastEditDate="2015-07-02T17:54:01.067" LastActivityDate="2015-07-02T17:54:01.067" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="163" PostTypeId="1" AcceptedAnswerId="165" CreationDate="2015-07-02T18:13:00.527" Score="10" ViewCount="6828" Body="&lt;p&gt;I want to play Minecraft on my laptop. How do I install it? I've downloaded the file from the Minecraft website, but nothing happens when I double click it.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-02T21:53:09.553" LastActivityDate="2015-07-02T21:53:09.553" Title="How can I install and run Minecraft?" Tags="|software-installation|games|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="164" PostTypeId="2" ParentId="163" CreationDate="2015-07-02T18:13:00.527" Score="5" Body="&lt;p&gt;Download the Minecraft launcher from &lt;a href=&quot;https://minecraft.net/download&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. You have to buy an account first, the price varies currency to currency, and normally slowly always going up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will get a &lt;code&gt;.jar&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZVh1h.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, to run this you need java. I use version 1.8 currently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest way to install java is to do it with the Web Up8 Oracle Java OOS. This installs JDK 8 (which includes Java JDK, JRE and the Java browser plugin):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt-get update&#xA;sudo apt-get install oracle-java8-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will have to accept the terms:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/VjQsf.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then it will download and install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LYUnW.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can just double click the Minecraft.jar file and it will open:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/k5O2N.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, to add it to slingshot, you can &lt;a href=&quot;https://askubuntu.com/a/263581/186134&quot;&gt;follow these instructions&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-02T18:54:03.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="165" PostTypeId="2" ParentId="163" CreationDate="2015-07-02T18:51:45.747" Score="14" Body="&lt;p&gt;There is an easy way to install Minecraft. Just add this PPA and install the Minecraft Installer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:minecraft-installer-peeps/minecraft-installer&#xA;sudo apt-get update&#xA;sudo apt-get install minecraft-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: This is not a Minecraft / Mojang ppa, but it does install the real launcher. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installer will download the current version of the official launcher and automatically satisfy the required dependencies such as OpenJDK, and add a &lt;code&gt;minecraft.desktop&lt;/code&gt; file in &lt;code&gt;/usr/share/applications&lt;/code&gt;, for easy start-up of slingshot-launcher. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click on the icon and click &quot;keep in dock&quot;. Then it will be available with links to common Minecraft resources such as the Wiki and your local folders, including Resource Packs and Screenshots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZFLeJ.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorDisplayName="user3" LastEditDate="2015-07-02T19:22:05.460" LastActivityDate="2015-07-02T19:22:05.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="166" PostTypeId="1" AcceptedAnswerId="172" CreationDate="2015-07-02T20:09:53.283" Score="3" ViewCount="1702" Body="&lt;p&gt;All the unmaximised windows on elementary OS have a shadow around them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This causes issues with me taking screenshots. How can I disable the shadow when it isn't maximised?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-08T09:38:43.797" LastActivityDate="2015-07-08T09:38:43.797" Title="How can I disable the shadow around a window?" Tags="|window-decoration|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="167" PostTypeId="1" CreationDate="2015-07-02T21:54:33.317" Score="10" ViewCount="4151" Body="&lt;p&gt;My laptop has the ability to read up to 4-finger gestures, but the functionality to map and use those gestures isn't included in Elementary OS. Is there any way I can do this?&lt;/p&gt;&#xA;" OwnerUserId="120" LastActivityDate="2015-07-03T01:50:02.753" Title="How can I enable multi-touch gestures on a laptop trackpad?" Tags="|mouse|hardware|gesture|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="168" PostTypeId="2" ParentId="167" CreationDate="2015-07-02T22:02:22.877" Score="4" Body="&lt;p&gt;You probably need &lt;code&gt;touchegg&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install touchegg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run it, with &lt;code&gt;touchegg&lt;/code&gt; in the command line. You will see something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Try to make a multitouch gesture. If everything goes well the information about the&#xA;gesture must appear&#xA;[+] Avaliable gesture:&#xA;     Name -&amp;gt;  Flick &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Drag&#xA;[+] Avaliable gesture:&#xA;     Name -&amp;gt;  Pinch&#xA;[+] Avaliable gesture:&#xA;     Name -&amp;gt;  Rotate&#xA;[+] Avaliable gesture:&#xA;     Name -&amp;gt;  Tap&#xA;[+] Avaliable gesture:&#xA;     Name -&amp;gt;  Touch&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So make the gesture, and if it appears follow the instructions from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, I'm not sure. I can't test this, as I'm on a desktop not laptop.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-02T22:02:22.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="169" PostTypeId="1" AcceptedAnswerId="204" CreationDate="2015-07-02T23:07:51.030" Score="17" ViewCount="5043" Body="&lt;p&gt;I have several folders in my home folder that are just plain blue icons, which I feel are a little out of place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6m5xs.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there an icon theme or tweak I can use to improve the look of my home folder a glance?&lt;/p&gt;&#xA;" OwnerUserId="120" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T12:38:36.037" LastActivityDate="2016-04-24T12:42:12.933" Title="Is there a way to install custom folder icons?" Tags="|icons|themes|home|folder|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="170" PostTypeId="5" CreationDate="2015-07-03T00:31:53.613" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T00:31:53.613" LastActivityDate="2015-07-03T00:31:53.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="171" PostTypeId="4" CreationDate="2015-07-03T00:31:53.613" Score="0" Body="Questions specific to the Luna release. Luna is the second stable release of elementary OS, corresponding to version 0.2. It was released in August 2013 and is based in Ubuntu 12.04 LTS." OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-07-06T03:30:06.457" LastActivityDate="2015-07-06T03:30:06.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="172" PostTypeId="2" ParentId="166" CreationDate="2015-07-03T01:47:11.630" Score="3" Body="&lt;p&gt;There's no straightforward way to do that, that I know of. Shadows are drawn by the toolkit (Gtk+). You can edit your system stylesheet (located at &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&lt;/code&gt;) and remove the &lt;code&gt;box-shadow&lt;/code&gt; from all &lt;code&gt;window-frame&lt;/code&gt; classes. But be aware that the box shadow property also effects the &lt;em&gt;inner&lt;/em&gt; shadow i.e. highlighting.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-07-03T18:32:19.663" LastActivityDate="2015-07-03T18:32:19.663" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="173" PostTypeId="2" ParentId="167" CreationDate="2015-07-03T01:50:02.753" Score="4" Body="&lt;p&gt;Be aware that the input stack simply does not support multitouch trackpads right now. You can interpret or simulate gesture support using things like touchegg, but you won't be able to get 1:1 finger tracking or in-app gestures for things like pinch-to-zoom. This won't be possible until the move to Wayland and LibInput&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-03T01:50:02.753" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="175" PostTypeId="1" AcceptedAnswerId="178" CreationDate="2015-07-03T06:49:47.723" Score="26" ViewCount="45636" Body="&lt;p&gt;How can I format my USB drive? Are there tools to format it or do I have to manually delete all files on my USB drive?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="45" LastEditDate="2015-07-14T02:36:09.300" LastActivityDate="2018-02-18T11:21:05.183" Title="How can I format a USB flash drive?" Tags="|usb-drive|storage|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="176" PostTypeId="2" ParentId="148" CreationDate="2015-07-03T07:01:40.797" Score="6" Body="&lt;p&gt;@crow is totally right, another way of doing the same thing is using the &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then open it from Slingshot &gt; Dconf Editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to path, &lt;code&gt;org&lt;/code&gt; &gt; &lt;code&gt;pantheon&lt;/code&gt; &gt; &lt;code&gt;terminal&lt;/code&gt; &gt; &lt;code&gt;settings&lt;/code&gt; &gt; &lt;code&gt;unsafe paste alert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JCH5p.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncheck the unsafe-paste-alert.&lt;/p&gt;&#xA;" OwnerUserId="226" LastEditorDisplayName="user3" LastEditDate="2015-07-05T15:05:26.423" LastActivityDate="2015-07-05T15:05:26.423" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="177" PostTypeId="2" ParentId="175" CreationDate="2015-07-03T08:39:09.197" Score="15" Body="&lt;p&gt;You can use &lt;a href=&quot;http://gparted.org/&quot; rel=&quot;noreferrer&quot;&gt;GParted&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install it by entering the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is a tutorial for formatting your USB flash drive :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.howtogeek.com/howto/17001/how-to-format-a-usb-drive-in-ubuntu-using-gparted/&quot; rel=&quot;noreferrer&quot;&gt;How to Format a USB Drive in Ubuntu Using GParted&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start Gparted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select the USB drive from the top write drop-down menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/CAABR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click the drive and select format, then check Apply&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kLQWH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/knlrU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorDisplayName="user170" LastEditDate="2015-07-05T11:21:22.667" LastActivityDate="2015-07-05T11:21:22.667" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="178" PostTypeId="2" ParentId="175" CreationDate="2015-07-03T09:09:55.057" Score="33" Body="&lt;p&gt;You can use &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/precise/gnome-disk-utility/&quot; rel=&quot;noreferrer&quot;&gt;Gnome Disk Utility&lt;/a&gt;. It is avaliable on the Software Centre and you can install it by:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;searching the Software Centre for &quot;Disks&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This command: &lt;code&gt;sudo apt-get install gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/h6Gla.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the Stop button, to unmount the disk. Then there will be either a + or - button. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Remove the partitions untill you are left with &quot;Free Space&quot;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add a partition, with the + button. You have to select the free space to do this.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When it is completed, you can click the play button to mount it again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-15T10:06:41.717" LastActivityDate="2015-07-15T10:06:41.717" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="179" PostTypeId="2" ParentId="123" CreationDate="2015-07-03T10:12:30.687" Score="2" Body="&lt;p&gt;App badges on Plank cannot be enabled or disabled — they simply appear when apps that have implemented support for Plank app badges. Unfortunately, not every application on Linux has implemented this integration. Thus, the only thing you can do is be sure you are using an application which supports that feature. These include:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Geary&lt;/li&gt;&#xA;&lt;li&gt;Files&lt;/li&gt;&#xA;&lt;li&gt;Midori&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="230" LastActivityDate="2015-07-03T10:12:30.687" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="180" PostTypeId="2" ParentId="169" CreationDate="2015-07-03T10:47:16.910" Score="5" Body="&lt;p&gt;This is not possible at the moment. I reported this on launchpad at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1462824&quot;&gt;Possibility to change folder icons&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add a bounty on this if you want to have this feature as soon as possible.&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorDisplayName="user3" LastEditDate="2015-07-03T10:47:42.497" LastActivityDate="2015-07-03T10:47:42.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="182" PostTypeId="2" ParentId="96" CreationDate="2015-07-03T11:15:11.953" Score="5" Body="&lt;p&gt;This seems to be &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/apt/+bug/1263540&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone suggested this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The solution that worked for me was emptying &lt;code&gt;/etc/apt/trusted.gpg.d&lt;/code&gt;, running apt-get update, and then manually adding every key it blocked on to the main &lt;code&gt;/etc/apt/trusted.gpg&lt;/code&gt; keyring with &lt;code&gt;apt-key adv&lt;/code&gt; as described above.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So run these commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/apt/trusted.gpg.d/ /etc/apt/trusted.gpg.d.backup&#xA;sudo mkdir /etc/apt/trusted.gpg.d&#xA;sudo chmod 755 /etc/apt/trusted.gpg.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add each key again with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install launchpad-getkeys&#xA;launchpad-getkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where you replace the hash with your needed key's hash.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="13251" LastEditDate="2018-10-08T14:56:31.027" LastActivityDate="2018-10-08T14:56:31.027" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="183" PostTypeId="2" ParentId="96" CreationDate="2015-07-03T12:48:15.560" Score="2" Body="&lt;p&gt;One may try &lt;a href=&quot;http://www.webupd8.org/2010/05/automatically-import-all-missing.html&quot; rel=&quot;nofollow&quot;&gt;launchpad-getkeys&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Delete all the contents in &lt;code&gt;/etc/apt/trusted.gpg.d/&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Add &lt;code&gt;$ sudo add-apt-repository ppa:nilarimogard/webupd8&lt;/code&gt; repository&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt; your local database&lt;/li&gt;&#xA;&lt;li&gt;Install &lt;code&gt;$ sudo apt-get install launchpad-getkeys&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;$ sudo launchpad-getkeys&lt;/code&gt;  &lt;/li&gt;&#xA;&lt;li&gt;Check &lt;code&gt;$ sudo apt-get update&lt;/code&gt; if the error is gone.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-03T12:48:15.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="184" PostTypeId="1" AcceptedAnswerId="185" CreationDate="2015-07-03T14:56:44.580" Score="10" ViewCount="5236" Body="&lt;p&gt;I've foolishly changed my screenshot settings, and want to set them back to have the same short cuts. I could boot a live USB / DVD but I'd rather not have to restart right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I reset all the shortcuts?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-25T01:56:12.493" LastActivityDate="2016-04-26T18:32:07.610" Title="How can I reset keyboard shortcuts?" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="185" PostTypeId="2" ParentId="184" CreationDate="2015-07-03T14:56:44.580" Score="10" Body="&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;gsettings&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm going to specifically answer this for the screenshot shortcuts, but you can change it to work for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, we're going to open terminal list all of the options we can change, but filter out the ones we don't want (or more accurately only show the ones we do).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively  | grep screenshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will see a list like this (&lt;a href=&quot;http://paste.ubuntu.com/11815702/&quot; rel=&quot;nofollow&quot;&gt;click here to see all the output&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.settings-daemon.plugins.media-keys window-screenshot ''&#xA;org.gnome.settings-daemon.plugins.media-keys screenshot-clip ''&#xA;org.gnome.settings-daemon.plugins.media-keys window-screenshot-clip '&amp;lt;Alt&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys area-screenshot-clip ''&#xA;org.gnome.settings-daemon.plugins.media-keys screenshot 'Print'&#xA;org.gnome.settings-daemon.plugins.media-keys area-screenshot '&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Print'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just so you know, &lt;code&gt;-clip&lt;/code&gt; means it saves to clipboard, the others are fairly self explanatory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We want to reset them - to have &quot;window-screenshot&quot; reset. &quot;window-screenshot&quot; has the path &lt;code&gt;org.gnome.settings-daemon.plugins.media-keys&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings&lt;/code&gt; has a &lt;code&gt;reset&lt;/code&gt; argument (like we use the &lt;code&gt;list-recursively&lt;/code&gt; option). That's what we're going to use to get it back to what it was.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, this is the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.settings-daemon.plugins.media-keys window-screenshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and now it is reset. Run the original command again to check, and you'll see an output like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.settings-daemon.plugins.media-keys window-screenshot '&amp;lt;Alt&amp;gt;Print'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;A quick explanation if you don't want to reset screenshot keys. For this one, I'll show media keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The key we want to grep for is &lt;code&gt;media&lt;/code&gt; or &lt;code&gt;media-keys&lt;/code&gt;, and here is a section of the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.settings-daemon.plugins.media-keys pause 'XF86AudioPause'&#xA;org.gnome.settings-daemon.plugins.media-keys active true&#xA;org.gnome.settings-daemon.plugins.media-keys area-screenshot '&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys logout '&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Delete'&#xA;org.gnome.settings-daemon.plugins.media-keys screenreader '&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;s'&#xA;org.gnome.settings-daemon.plugins.media-keys volume-mute 'XF86AudioMute'&#xA;org.gnome.settings-daemon.plugins.media-keys volume-up 'XF86AudioRaiseVolume'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you can simply follow the same instructions above for the new path.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-25T01:56:50.560" LastActivityDate="2016-04-25T01:56:50.560" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="186" PostTypeId="2" ParentId="101" CreationDate="2015-07-03T15:20:10.310" Score="9" Body="&lt;p&gt;I highly suggest you to try &lt;a href=&quot;https://launchpad.net/synapse-project&quot; rel=&quot;noreferrer&quot;&gt;Synapse launcher&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's basically an alternative application launcher that can search for files &lt;em&gt;as well as&lt;/em&gt; applications. It just sits there in wingpanel and gets activated once you press the keyboard shortcut : &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; (which you can modify to be anything you want to). You can add and remove extensions so it searches for anything you like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It comes pre-bundled with a couple of themes. Here's a screenshot of me typing the word &lt;code&gt;elementary&lt;/code&gt; in it using one of the pre-bundled themes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/v6WDz.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Installation instructions&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Here's how to install Synapse in Elementary:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:synapse-core/ppa &#xA;sudo apt-get update&#xA;sudo apt-get install synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="138" LastEditorUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-07-19T18:46:52.493" LastActivityDate="2015-07-19T18:46:52.493" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="187" PostTypeId="5" CreationDate="2015-07-03T15:50:47.497" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T15:50:47.497" LastActivityDate="2015-07-03T15:50:47.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="188" PostTypeId="4" CreationDate="2015-07-03T15:50:47.497" Score="0" Body="This is for any question about the images that represent applications. These images show up in Slingshot and Plank. Questions can be about duplicates, icon packs, low quality icons and more." OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-03T16:25:31.713" LastActivityDate="2015-07-03T16:25:31.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="189" PostTypeId="5" CreationDate="2015-07-03T15:52:16.550" Score="0" Body="&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://launchpad.net/plank&quot; rel=&quot;nofollow&quot;&gt;Plank&lt;/a&gt;&lt;/strong&gt; is a dock application included by default with elementary OS. It can also be installed on other Linux distributions and used in other desktop environments.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:30.627" LastActivityDate="2016-10-02T14:33:30.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="190" PostTypeId="4" CreationDate="2015-07-03T15:52:16.550" Score="0" Body="Plank is elementary OS's default dock. It shows active applications and is usually found at the bottom of the screen." LastEditorUserId="5565" LastEditDate="2016-10-02T14:34:41.997" LastActivityDate="2016-10-02T14:34:41.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="191" PostTypeId="5" CreationDate="2015-07-03T15:56:46.013" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T15:56:46.013" LastActivityDate="2015-07-03T15:56:46.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="192" PostTypeId="4" CreationDate="2015-07-03T15:56:46.013" Score="0" Body="Questions about wingpanel, the bar that appears at the top of the screen. This includes both regular usage, and customization." LastEditorUserId="84" LastEditDate="2015-08-06T20:41:25.270" LastActivityDate="2015-08-06T20:41:25.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="193" PostTypeId="5" CreationDate="2015-07-03T15:57:30.273" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T15:57:30.273" LastActivityDate="2015-07-03T15:57:30.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="194" PostTypeId="4" CreationDate="2015-07-03T15:57:30.273" Score="0" Body="The Ubuntu Software Center gives you instant access to thousands of open-source and carefully selected free applications. This is for questions about using it; installing, adding ppas, updating and the program itself." LastEditorUserId="-1" LastEditDate="2015-07-20T22:19:34.443" LastActivityDate="2015-07-20T22:19:34.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="195" PostTypeId="5" CreationDate="2015-07-03T15:58:49.987" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T15:58:49.987" LastActivityDate="2015-07-03T15:58:49.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="196" PostTypeId="4" CreationDate="2015-07-03T15:58:49.987" Score="0" Body="For questions about images taken by the computer to record the items on the monitor or other output device. This is a digital image taken by software running on the computer." OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-03T16:25:38.657" LastActivityDate="2015-07-03T16:25:38.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="197" PostTypeId="5" CreationDate="2015-07-03T16:16:03.523" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T16:16:03.523" LastActivityDate="2015-07-03T16:16:03.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="198" PostTypeId="4" CreationDate="2015-07-03T16:16:03.523" Score="0" Body="Questions relating to Microsoft's Skype VOIP (Voice Over Internet Protocol) application and services." OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-03T16:25:54.707" LastActivityDate="2015-07-03T16:25:54.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="199" PostTypeId="2" ParentId="135" CreationDate="2015-07-03T16:33:35.243" Score="4" Body="&lt;p&gt;I've used &lt;a href=&quot;https://screencloud.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;ScreenCloud&lt;/a&gt; in the past and liked it a lot. It's &lt;a href=&quot;https://github.com/olav-st/screencloud&quot; rel=&quot;nofollow noreferrer&quot;&gt;open source&lt;/a&gt; and the maintainer was pretty responsive when I had questions and suggestions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it's pretty versatile, too. Its features include:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;3 shortcuts which take a screenshot of different areas areas (full screen, a specific window, or an area you select by dragging a rectangle)&lt;/li&gt;&#xA;&lt;li&gt;customizable keyboard shortcuts&lt;/li&gt;&#xA;&lt;li&gt;several choices of target location for the images (including cloud services like Dropbox and Imgur).&lt;/li&gt;&#xA;&lt;li&gt;customizable filenames for the screenshots, which accepts date/time arguments (for example, &lt;code&gt;%Y-%m-%d %T&lt;/code&gt; produces &lt;code&gt;YYYY-MM-DD HH:MM:SS&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;an option whether to just take a screenshot immediately with the default settings, or to show a GUI popup asking you to confirm the settings every time&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Answering your specific question, it can also either include or exclude the window borders. On elementary, the shadows will always be taken in the screenshot (see below). However, with and without borders will control &lt;em&gt;where&lt;/em&gt; the border is - so it will either just be the window you want, then a white background added and then a shadow, or it will be the thing that is actually behind the window, including shadows. Bit complex, look at these pictures, with and without borders:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SEjWy.png&quot; width=&quot;325&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/12lBH.png&quot; width=&quot;325&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download a &lt;code&gt;.deb&lt;/code&gt; at their homepage - click &lt;strong&gt;Download at the top menu&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-25T02:06:54.703" LastActivityDate="2016-04-25T02:06:54.703" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="200" PostTypeId="5" CreationDate="2015-07-03T17:11:23.083" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-03T17:11:23.083" LastActivityDate="2015-07-03T17:11:23.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="201" PostTypeId="4" CreationDate="2015-07-03T17:11:23.083" Score="0" Body="Questions about keyboard shortcuts: both which ones to use and how to create custom shortcuts." OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-06T03:30:41.037" LastActivityDate="2015-07-06T03:30:41.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="202" PostTypeId="1" CreationDate="2015-07-03T19:55:12.370" Score="10" ViewCount="675" Body="&lt;p&gt;My system is freezing from time to time, what steps should I take so I can find the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system is a mac mini late 2012 i5 with 16gb of ram&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="242" LastEditDate="2015-07-05T04:27:05.297" LastActivityDate="2015-07-05T13:09:26.443" Title="How should I diagnose a system freeze?" Tags="|system|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="203" PostTypeId="1" AcceptedAnswerId="205" CreationDate="2015-07-03T21:09:51.000" Score="10" ViewCount="1962" Body="&lt;p&gt;I would like the lock-screen clock and the wingpanel clock to show seconds. Is this possible?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="45" LastEditDate="2015-08-01T00:49:15.293" LastActivityDate="2019-12-21T05:34:10.573" Title="Can the elementary clock display seconds?" Tags="|wingpanel|greeter|clock|time|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="204" PostTypeId="2" ParentId="169" CreationDate="2015-07-03T21:40:02.647" Score="15" Body="&lt;p&gt;There is one trick, but is only relevant if you are using a small number of folders in the user's home directory. By default, in the home directory there is &lt;strong&gt;Documents&lt;/strong&gt;, &lt;strong&gt;Downloads&lt;/strong&gt;, &lt;strong&gt;Music&lt;/strong&gt;, &lt;strong&gt;Pictures&lt;/strong&gt;, &lt;strong&gt;Public&lt;/strong&gt;, &lt;strong&gt;Templates&lt;/strong&gt; and &lt;strong&gt;Videos&lt;/strong&gt;. It's a set of default user directories, see the &lt;a href=&quot;http://www.freedesktop.org/wiki/Software/xdg-user-dirs/&quot; rel=&quot;nofollow noreferrer&quot;&gt;freedesktop.org&lt;/a&gt; website for further information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5FUL5.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The idea is that you can replace your unwanted folders on the other, and give them the other icons. This is not exactly the right way, but it works. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll tell about it in my example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not use &lt;strong&gt;Public&lt;/strong&gt; and &lt;strong&gt;Templates&lt;/strong&gt;, but I have folders &lt;strong&gt;GitHub&lt;/strong&gt; and &lt;code&gt;Sports Interactive&lt;/code&gt; and I would give them custom icons. To do this, I first edited the names of folders in &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt;. It now looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DOWNLOAD_DIR=&quot;$HOME/Downloads&quot;&#xA;XDG_TEMPLATES_DIR=&quot;$HOME/Sports Interactive&quot;&#xA;XDG_PUBLICSHARE_DIR=&quot;$HOME/GitHub&quot;&#xA;XDG_DOCUMENTS_DIR=&quot;$HOME/Documents&quot;&#xA;XDG_MUSIC_DIR=&quot;$HOME/Music&quot;&#xA;XDG_PICTURES_DIR=&quot;$HOME/Pictures&quot;&#xA;XDG_VIDEOS_DIR=&quot;$HOME/Videos&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After I posted custom icons in &lt;code&gt;.icons/elementary/places&lt;/code&gt; (if you use a non-standard icon theme, the path will be different). The structure of the files in my case looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/S5dpw.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I took the icons from &lt;a href=&quot;http://fabianinostroza.deviantart.com/art/Elementary-Extra-Folders-387250061&quot; rel=&quot;nofollow noreferrer&quot;&gt;FabianInostroza's DeviantArt&lt;/a&gt;. This is the largest repository of folder icons in the elementary OS style that I know of.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I logged out and in again, my home folder looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/MSXZI.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T12:42:12.933" LastActivityDate="2016-04-24T12:42:12.933" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="205" PostTypeId="2" ParentId="203" CreationDate="2015-07-03T23:33:28.380" Score="20" Body="&lt;p&gt;Yes, you can use Dconf-editor or Configurator and go to &lt;code&gt;com.canonical.indicator.datetime&lt;/code&gt; and enable &lt;code&gt;show-seconds&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or just paste this in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime show-seconds true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you don't want to show seconds anymore you can use this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime show-seconds false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="191" LastEditorDisplayName="user3" LastEditDate="2015-07-04T09:31:19.660" LastActivityDate="2015-07-04T09:31:19.660" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="206" PostTypeId="1" AcceptedAnswerId="208" CreationDate="2015-07-03T23:56:35.190" Score="8" ViewCount="2576" Body="&lt;p&gt;Are there any tools or software which can be used in elementary ? If so, do they support CYMK format other than RGB ? &lt;/p&gt;&#xA;" OwnerUserId="195" LastEditorUserId="242" LastEditDate="2015-07-05T01:46:56.597" LastActivityDate="2019-12-06T06:17:37.957" Title="Is there any Photo Editing Software for elementary?" Tags="|applications|photo-editing|color-format|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="207" PostTypeId="2" ParentId="206" CreationDate="2015-07-04T01:49:58.060" Score="3" Body="&lt;p&gt;I use Inkscape.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It support CYMK, RGB and HSL.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a vector graphics editor, so may not be what you want. Install it from AppCenter, or get a newer version &lt;a href=&quot;https://flathub.org/apps/details/org.inkscape.Inkscape&quot; rel=&quot;nofollow noreferrer&quot;&gt;from Flathub&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="308" LastEditDate="2019-12-06T06:16:12.483" LastActivityDate="2019-12-06T06:16:12.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="208" PostTypeId="2" ParentId="206" CreationDate="2015-07-04T03:01:56.893" Score="6" Body="&lt;p&gt;I use &lt;a href=&quot;https://krita.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Krita&lt;/a&gt;. It's a digital painting and illustration application. Krita offers CMYK support, HDR painting, perspective grids, dockers, filters, painting assistants, and many other features.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Krita, head to AppCenter. A newer version can also be installed &lt;a href=&quot;https://flathub.org/apps/details/org.kde.krita&quot; rel=&quot;nofollow noreferrer&quot;&gt;from Flathub&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="308" LastEditDate="2019-12-06T06:13:39.120" LastActivityDate="2019-12-06T06:13:39.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="209" PostTypeId="1" AcceptedAnswerId="214" CreationDate="2015-07-04T03:26:15.870" Score="9" ViewCount="1526" Body="&lt;p&gt;Symbolic links are useful for storing things in a separate place from where they appear to be.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;In computing, a symbolic link is a type of file that contains a reference to another file or directory. This affects pathname resolution.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How can I create one in elementary (both GUI/Terminal)?&lt;/p&gt;&#xA;" OwnerUserId="142" LastEditorDisplayName="user3" LastEditDate="2015-07-05T09:52:44.417" LastActivityDate="2015-07-05T09:52:44.417" Title="How can I create a symbolic link?" Tags="|command-line|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="210" PostTypeId="2" ParentId="209" CreationDate="2015-07-04T03:26:15.870" Score="4" Body="&lt;p&gt;To create a symbolic link from &lt;code&gt;/home/huey/galactica&lt;/code&gt; to &lt;code&gt;/usr/local/pegasus&lt;/code&gt;, meaning that the &lt;code&gt;galactica&lt;/code&gt; directory in the home folder points to the &lt;code&gt;pegasus&lt;/code&gt; folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s /home/huey/galactica /usr/local/pegasus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="142" LastActivityDate="2015-07-04T03:26:15.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="211" PostTypeId="1" AcceptedAnswerId="212" CreationDate="2015-07-04T03:32:42.527" Score="2" ViewCount="994" Body="&lt;p&gt;&lt;a href=&quot;http://linux.die.net/man/1/screen&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;screen&lt;/code&gt;&lt;/a&gt; is a Linux tool for managing multiple shell windows. Upon running it in a headless version of Elementary I received the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(watson)huey@terminus:~$ screen&#xA;&#xA;Cannot make directory '/var/run/screen': Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I resolve this?&lt;/p&gt;&#xA;" OwnerUserId="142" LastActivityDate="2019-03-08T20:33:19.610" Title="Permissions denied for screen" Tags="|command-line|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="212" PostTypeId="2" ParentId="211" CreationDate="2015-07-04T03:35:39.803" Score="4" Body="&lt;p&gt;It appears to be &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/screen/+bug/574773&quot; rel=&quot;nofollow&quot;&gt;a bug&lt;/a&gt; primarily affecting server installs and other headless versions of Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can be fixed with &lt;code&gt;sudo /etc/init.d/screen-cleanup start&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to the bug description:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I believe this is because&#xA;  &lt;code&gt;/etc/rcS.d/S70screen-cleanup&lt;/code&gt; is running via &lt;code&gt;upstart&lt;/code&gt; much earlier than it expects to have run, and is failing to correctly clean up that directory.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="142" LastEditorUserId="142" LastEditDate="2015-07-13T11:31:57.907" LastActivityDate="2015-07-13T11:31:57.907" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="213" PostTypeId="2" ParentId="206" CreationDate="2015-07-04T03:44:49.410" Score="7" Body="&lt;h1&gt;&lt;a href=&quot;http://www.gimp.org/&quot; rel=&quot;noreferrer&quot;&gt;GIMP&lt;/a&gt; with &lt;a href=&quot;http://cue.yellowmagic.info/softwares/separate-plus/&quot; rel=&quot;noreferrer&quot;&gt;Separate+&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;p&gt;GIMP is a well known image manipulation program and a popular alternative to Photoshop. Although it doesn't have built-in CMYK support, &lt;a href=&quot;https://askubuntu.com/questions/360186/how-to-install-separate-gimp-plugin-for-cmyk-support&quot;&gt;the Separate+ plugin can allow you to convert from RGB to CMYK&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To install GIMP, head to AppCenter. A newer version can also be installed &lt;a href=&quot;https://flathub.org/apps/details/org.gimp.GIMP&quot; rel=&quot;noreferrer&quot;&gt;from Flathub&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;This is not necessarily a complete solution for CMYK, though:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;CMYK data is interpreted and processed only within separate plug-in. From a GIMP's viewpoint, it is not recognized that CMYK data is processed.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Hence your mileage may vary.&lt;/p&gt;&#xA;" OwnerUserId="142" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-06T06:14:56.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="214" PostTypeId="2" ParentId="209" CreationDate="2015-07-04T05:37:44.613" Score="11" Body="&lt;p&gt;The latest version of Pantheon Files on freya allow you to drag and drop files by right-clicking on them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you drop it a contextual menu appears letting you copy it, move it, or create a link. To manually create it with the terminal, just &lt;a href=&quot;https://elementaryos.stackexchange.com/a/210/3&quot;&gt;follow Huey's steps&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="244" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-04T09:26:33.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="215" PostTypeId="1" CreationDate="2015-07-04T06:33:48.150" Score="7" ViewCount="15113" Body="&lt;p&gt;I have installed elementary OS freya installed on a drive which also contains another ntfs partition which I would like to mount at system startup. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can do this?&lt;/p&gt;&#xA;" OwnerUserId="189" LastActivityDate="2020-02-06T18:23:34.050" Title="How to setup your NTFS drives/partitions to mount on elementary OS startup?" Tags="|startup|ntfs|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="216" PostTypeId="1" AcceptedAnswerId="218" CreationDate="2015-07-04T07:03:38.803" Score="10" ViewCount="1617" Body="&lt;p&gt;I have enabled Auto Login in the settings. But if the laptop goes inactive, the screen get locked and wants to know the password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a solution to deactivate the password query on the lock screen if the Auto Login is active?&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorUserId="45" LastEditDate="2015-07-14T01:29:42.197" LastActivityDate="2020-01-18T13:14:40.227" Title="How can I remove the password prompt from the lock screen?" Tags="|security|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="218" PostTypeId="2" ParentId="216" CreationDate="2015-07-04T07:36:10.280" Score="11" Body="&lt;p&gt;You can deactivate the password query in &lt;code&gt;System Settings -&amp;gt; Security &amp;amp; Privacy -&amp;gt; Locking&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6QEAW.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-07-12T21:00:42.263" LastActivityDate="2015-07-12T21:00:42.263" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="219" PostTypeId="2" ParentId="215" CreationDate="2015-07-04T09:26:04.230" Score="7" Body="&lt;p&gt;Easy to set up using fstab. Run &lt;code&gt;sudo blkid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and you should get something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1: UUID=&quot;b9377d9b-639f-47da-ae99-efe277eb56b3&quot; TYPE=&quot;ext4&quot; &#xA;/dev/sdb1: LABEL=&quot;Backup 1&quot; UUID=&quot;6177d371-80e4-49bd-bb77-de269e175c97&quot; TYPE=&quot;ext4&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the UUID of the partition you want to mount. If you are unsure of the partition you want to mount use &lt;code&gt;sudo fdisk -l&lt;/code&gt; to get more details of the partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now edit your &lt;code&gt;/etc/fstab&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following lines to your file:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Windows Partition&#xA;UUID=&amp;lt;xxxxx&amp;gt; &amp;lt;mount point&amp;gt; ntfs rw,auto,users,exec,nls=utf8,umask=003,gid=46,uid=1000    0   0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You must replace the &lt;code&gt;&amp;lt;xxxx&amp;gt;&lt;/code&gt; with your UUID and &lt;code&gt;&amp;lt;mount point&amp;gt;&lt;/code&gt; with your desired mount point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the mount point you can choose something like &lt;code&gt;/media/&amp;lt;user&amp;gt;/windows&lt;/code&gt; (which is the standard mount point for other partitions) or create a folder (without spaces) in your home directory and use &lt;code&gt;/home/&amp;lt;user&amp;gt;/&amp;lt;folder&amp;gt;&lt;/code&gt; as the mount point.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your file should look like this in the end:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda1 during installation&#xA;UUID=b9377d9b-639f-47da-ae99-efe277eb56b3 /               ext4    errors=remount-ro 0       1&#xA;# swap was on /dev/sda5 during installation&#xA;#UUID=89bfd6b9-b2be-41c1-8c9f-5e7e5cb738d3 none            swap    sw              0       0&#xA;/dev/mapper/cryptswap1 none swap sw 0 0&#xA;#Windows Partition&#xA;UUID=b9377d9b-639f-47da-ae99-efe277eb56b3 /media/tim/windows ntfs rw,auto,users,exec,nls=utf8,umask=003,gid=46,uid=1000    0   0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After editing the file you should run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it returns any error, &lt;strong&gt;Do not Reboot&lt;/strong&gt; (your PC may fail to restart), as you probably have some error in the mount point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If everything goes well you should see your partition mounted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/46588/how-to-automount-ntfs-partitions&quot;&gt;Source, Ask Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-04T10:03:01.983" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="221" PostTypeId="2" ParentId="206" CreationDate="2015-07-04T11:15:55.133" Score="7" Body="&lt;p&gt;GIMP, Krita, Darktable, and Inkscape are not made specifically for elementary OS or created with the HIG of elementary OS in mind, but they will get the job done and are available in AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS has it's own photo manager called Photos which also allows for very basic picture manipulation tasks.&lt;/p&gt;&#xA;" OwnerUserId="25" LastEditorUserId="308" LastEditDate="2019-12-06T06:02:41.097" LastActivityDate="2019-12-06T06:02:41.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="222" PostTypeId="1" AcceptedAnswerId="223" CreationDate="2015-07-04T12:58:13.827" Score="8" ViewCount="6172" Body="&lt;p&gt;Is it possible to install &lt;code&gt;conky-manager&lt;/code&gt; on Freya? Is is compatible with Pantheon Files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes how can I start Conky when my computer boots?&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorDisplayName="user3" LastEditDate="2015-07-04T16:17:06.137" LastActivityDate="2016-06-10T04:29:36.790" Title="How install conky-manager on Freya?" Tags="|conky|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="223" PostTypeId="2" ParentId="222" CreationDate="2015-07-04T13:47:34.570" Score="15" Body="&lt;p&gt;Open your terminal, and add a new PPA to your repositories, then install it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:teejee2008/ppa&#xA;sudo apt-get update &#xA;sudo apt-get install conky-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To run conky at startup, you go to Applications -&gt; System Settings -&gt; Applications -&gt; Startup -&gt; Click the + icon at the bottom left corner, enter &lt;code&gt;conky&lt;/code&gt; in the the bottom text input and hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use conky with elementary OS 0.3 Freya with no issues.&lt;/p&gt;&#xA;" OwnerUserId="48" LastEditorUserId="4710" LastEditorDisplayName="user3" LastEditDate="2016-06-10T04:29:36.790" LastActivityDate="2016-06-10T04:29:36.790" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="224" PostTypeId="1" AcceptedAnswerId="225" CreationDate="2015-07-04T18:10:42.163" Score="4" ViewCount="989" Body="&lt;p&gt;How can I transform the &lt;strong&gt;ugly&lt;/strong&gt; Elementary OS Freya login screen back into the beautiful Luna login screen.  That, for me being picky with design, would put me off using Elementary.  I like the Operating System but the new login screen just puts me off.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT: Added images&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current &lt;strong&gt;ugly&lt;/strong&gt; login screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7ziUC.jpg&quot; alt=&quot;Current **ugly** login screen&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Old beautiful login screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TTDHS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="254" LastEditorUserId="45" LastEditDate="2015-07-19T23:29:50.303" LastActivityDate="2015-07-21T11:09:07.383" Title="How to revert to the old login screen" Tags="|greeter|" AnswerCount="2" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="225" PostTypeId="2" ParentId="224" CreationDate="2015-07-04T19:08:22.357" Score="11" Body="&lt;p&gt;Unfortunately, there is no way to get the old screen. Both screenshots show &lt;code&gt;pantheon-greeter&lt;/code&gt; but in different versions - and it's not possible to install older versions on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's sad you'd consider to leave elementary OS because of the new greeter though.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-04T19:08:22.357" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="226" PostTypeId="2" ParentId="175" CreationDate="2015-07-04T19:58:26.793" Score="6" Body="&lt;p&gt;Because sometimes erasing a drive can be tricky (see the cases mentioned below) I would recommend having different tools at hand for that purpose. Therefore, the following should be seen as a complement to the other answer(s).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;Mintstick&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;My favorite is the &lt;strong&gt;USB Stick Formatter&lt;/strong&gt; and  the &lt;strong&gt;Image Writer&lt;/strong&gt; from Linux Mint.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's Mint's alternative to Ubuntu Unity default Startup Disk Creator (see below) - only that the formatting tool is run as a separate GUI.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:tsvetko.tsvetkov/trusty-backports&#xA;sudo apt-get update&#xA;sudo apt-get install mintstick&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;strong&gt;deb files&lt;/strong&gt; can be found &lt;a href=&quot;http://packages.linuxmint.com/pool/main/m/mintstick/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ennfY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/b0ZLF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JpaY2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a very powerful tool. When you have a live Linux system on an USB key it may be difficult to simply erase that drive. &lt;strong&gt;Sometimes, when even Gparted was unable to fix, re-create partition tables and format (see last part of this answer), this little tool was able to format it&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;Startup Disk Creator&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install usb-creator-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is made for writing images to USB sticks but it has an erase option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/k7R9f.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Emergency solution (Troubleshooting)&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In some cases (like the one aforementioned, involving a Linux system on USB) you may get errors when trying to format with Gparted. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;If the USB key can be mounted&lt;/strong&gt; but you get all kind of errors in Gparted, like so:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/8NTik.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kpoyl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5A1T0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/3Mb4a.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then, try other tools, like the ones mentioned under this question, especially &lt;strong&gt;Disks&lt;/strong&gt; (&lt;code&gt;gnome-disk-utility&lt;/code&gt;) and &lt;strong&gt;USB Stick Formatter&lt;/strong&gt; (&lt;code&gt;mintstick&lt;/code&gt;). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I can tell, in many cases when Gparted will not work, Mintstick and Gnome Disk Utility (Disks) will.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;If the USB stick cannot be mounted&lt;/strong&gt; anymore:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/rohiF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case, &lt;strong&gt;delete the partition in Gparted and create a new one&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the USB stick cannot be mounted by the system, Gparted would still access it, delete and create partitions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gnome Disk Utility can access it too while not mounted and you may try delete or format the partition, but that may just get an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/m8vs5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;If none of the above works&lt;/strong&gt; (whether the USB can be mounted or not), the &lt;code&gt;dd&lt;/code&gt; tool can be used to wipe out all errors by filling the USB drive with zeros :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the terminal and check the path of the USB device with &lt;code&gt;lsblk&lt;/code&gt; (in this case would be &lt;code&gt;sdb&lt;/code&gt;):&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6iBLX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;The next command wipes the entire disk, not only the partition table. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dd if=/dev/zero of=/dev/sdb bs=1M&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;That takes some tyme, so you might like to see the progress of the process. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Open a new Terminal window/tab and do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;watch -n5 'sudo kill -USR1 `pgrep ^dd`'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then go back to the initial window/tab to see the progress&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/AYp0W.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That will wipe the USB drive completely.  You will need to use &lt;code&gt;gparted&lt;/code&gt; to create a new partition table and a new partition (Device &gt; Create Partition Table; Partition &gt; New). &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-09-29T07:03:07.300" LastActivityDate="2016-09-29T07:03:07.300" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="227" PostTypeId="1" AcceptedAnswerId="228" CreationDate="2015-07-04T20:10:42.967" Score="10" ViewCount="3378" Body="&lt;p&gt;How can I display the weather of one or possibly multiple locations in the wingpanel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Searching the net brings up some indicators for Unity, but I don't think that's what I'm looking for.&lt;/p&gt;&#xA;" OwnerDisplayName="user193" LastEditorUserId="5565" LastEditDate="2016-10-05T20:30:37.760" LastActivityDate="2019-02-20T19:42:22.767" Title="How to add the weather of one or multiple locations to the top panel?" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="228" PostTypeId="2" ParentId="227" CreationDate="2015-07-04T20:26:39.013" Score="6" Body="&lt;p&gt;I highly suggest you to try out &lt;code&gt;my-weather-indicator&lt;/code&gt;. It will satisfy all of your needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a screenshot showing the weather in Amsterdam:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/MhO39.png&quot; alt=&quot;my-weather-indicator Amsterdam&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Installation instructions&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:atareao/atareao&#xA;sudo apt-get update&#xA;sudo apt-get install my-weather-indicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It kind of has a &lt;em&gt;huge&lt;/em&gt; dropdown menu once you right-click it that shows you the detailed info, but that's the only disadvantage of it I can think of.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-04T20:35:08.393" LastActivityDate="2015-07-04T20:35:08.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="229" PostTypeId="1" CreationDate="2015-07-04T21:05:59.267" Score="10" ViewCount="1459" Body="&lt;p&gt;Scratch hasn't worked for the last two months, I can't edit files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/FQctF.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="28" LastEditorDisplayName="user3" LastEditDate="2015-07-05T12:45:12.360" LastActivityDate="2015-11-03T13:17:10.933" Title="How can I purge Scratch's configuration and / or re-install it?" Tags="|code|apps|" AnswerCount="3" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="230" PostTypeId="2" ParentId="229" CreationDate="2015-07-04T21:12:07.920" Score="5" Body="&lt;p&gt;You can reinstall apps / packages with apt-get with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-07-04T21:12:07.920" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="231" PostTypeId="1" AcceptedAnswerId="261" CreationDate="2015-07-04T21:18:09.620" Score="9" ViewCount="398" Body="&lt;p&gt;Is there any IRC client that's compliant with elementary's &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot; rel=&quot;nofollow&quot;&gt;human interface guidelines&lt;/a&gt;? If not, is anyone trying to build one?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that I'm asking for an &lt;a href=&quot;https://en.wikipedia.org/wiki/Internet_Relay_Chat&quot; rel=&quot;nofollow&quot;&gt;IRC&lt;/a&gt; (Internet Relay Chat) client, not a general purpose chat client that supports 10+ chat services.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="45" LastEditDate="2015-07-06T22:38:05.667" LastActivityDate="2015-07-06T22:38:05.667" Title="Are there any IRC clients that comply with the human interface guidelines?" Tags="|applications|software-recommendation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="232" PostTypeId="1" AcceptedAnswerId="233" CreationDate="2015-07-04T21:26:43.507" Score="15" ViewCount="750" Body="&lt;p&gt;Is there a way to make &lt;a href=&quot;https://atom.io/&quot;&gt;Atom&lt;/a&gt; look more compliant with the elementary's design?&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorDisplayName="user3" LastEditDate="2015-07-08T09:42:44.303" LastActivityDate="2016-08-02T10:57:07.770" Title="Is there a way to theme Atom to fit in with elementary?" Tags="|software-installation|design|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="233" PostTypeId="2" ParentId="232" CreationDate="2015-07-04T21:26:43.507" Score="18" Body="&lt;p&gt;Yes there is. There's a special UI theme called &lt;code&gt;elementary-light-ui&lt;/code&gt; that you can use. The theme was created by one of the main elementary's developers (Cassidy James). To install it, just type in the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apm install elementary-light-ui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After it, just press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+P, type &lt;code&gt;change themes&lt;/code&gt;, press &lt;kbd&gt;Enter&lt;/kbd&gt; and select &lt;code&gt;elementary-light-ui&lt;/code&gt; as your new UI theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/QH4ls.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2016-08-02T10:57:07.770" LastActivityDate="2016-08-02T10:57:07.770" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="234" PostTypeId="2" ParentId="229" CreationDate="2015-07-04T21:38:29.800" Score="4" Body="&lt;p&gt;As it isn't working currently, a reinstall might not fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove all config files (so Scratch settings and last opened files will be gone) as well, use these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge scratch-text-editor&#xA;sudo apt-get install scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="68" LastEditDate="2015-07-05T07:22:28.320" LastActivityDate="2015-07-05T07:22:28.320" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="235" PostTypeId="2" ParentId="231" CreationDate="2015-07-04T22:14:45.977" Score="4" Body="&lt;p&gt;Is there one? Maybe, I'll get to that after the second part. Is anyone trying to build one?&lt;/p&gt;&#xA;&lt;p&gt;Yes - from &lt;a href=&quot;http://www.reddit.com/r/elementaryos/comments/2dkpad/chat_application_in_freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Reddit&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Tom Beckmann is working on a chat plugin for Gala.&lt;/p&gt;&#xA;&lt;p&gt;Here's a mockup by Daniel Fore. &lt;a href=&quot;http://danrabbit.deviantart.com/art/Chat-Bubbles-405110826&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://danrabbit.deviantart.com/art/Chat-Bubbles-405110826&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here's the code for it &lt;a href=&quot;https://code.launchpad.net/%7Etombeckmann/gala/plugin-chat&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~tombeckmann/gala/plugin-chat&lt;/a&gt; Still in early development.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The mockup:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LDzEv.png&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Does one exist? Well, &lt;a href=&quot;https://code.launchpad.net/%7Etombeckmann/gala/plugin-chat&quot; rel=&quot;nofollow noreferrer&quot;&gt;here's the code&lt;/a&gt; for that one.&lt;/p&gt;&#xA;&lt;p&gt;I don't have time to read the &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot; rel=&quot;nofollow noreferrer&quot;&gt;Human Interface Guidelines&lt;/a&gt;, but from those mockups I'd say Google Hangouts is similar with the floating bubbles:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/bQ183.jpg&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://lmelinux.net/2014/11/25/chat-bubbles-may-come-elementary-os-plank-extension/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here is a newer post&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-06T10:17:41.803" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="236" PostTypeId="1" AcceptedAnswerId="265" CreationDate="2015-07-05T04:05:29.620" Score="5" ViewCount="1821" Body="&lt;p&gt;If I want to use another window manager by default, what process would I need to go through to achieve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like it to work along with cerbere.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-05T16:34:56.200" Title="How can I use another window manager, such as Kwin, in place of Gala?" Tags="|startup|window-manager|cerbere|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="237" PostTypeId="5" CreationDate="2015-07-05T04:07:28.717" Score="0" Body="&lt;p&gt;Cerbere is a daemon (a program that runs in the background, without a GUI) which keeps track of a set of applications and ensures that they are relaunched if anything goes wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, it restarts the panel, dock and window-manager if they crash or are killed.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="242" LastEditDate="2015-07-06T03:30:36.347" LastActivityDate="2015-07-06T03:30:36.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="238" PostTypeId="4" CreationDate="2015-07-05T04:07:28.717" Score="0" Body="A daemon that relaunches critical applications if they crash or are killed." OwnerUserId="242" LastEditorUserId="242" LastEditDate="2015-07-06T03:29:41.030" LastActivityDate="2015-07-06T03:29:41.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="239" PostTypeId="1" AcceptedAnswerId="240" CreationDate="2015-07-05T04:20:59.023" Score="3" ViewCount="995" Body="&lt;p&gt;I would like to add/remove applications from the list of those handled by &lt;code&gt;cerbere&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="5565" LastEditDate="2016-10-05T20:32:09.547" LastActivityDate="2021-08-27T10:50:28.387" Title="How can I manage which applications are handled by cerbere?" Tags="|cerbere|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="240" PostTypeId="2" ParentId="239" CreationDate="2015-07-05T04:20:59.023" Score="3" Body="&lt;p&gt;There are two ways in which you can manage Cerbere's list.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Graphical Option:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You will need &lt;code&gt;dconf-editor&lt;/code&gt; in order to use this option. To install it, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or, install it via the Software Center.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Once it is installed, run &lt;code&gt;dconf-editor&lt;/code&gt;. You will be presented with a window like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Aijvq.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now you need to find &lt;code&gt;org.pantheon.cerbere&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6e8Vx.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can add any application you want, but &lt;strong&gt;take note&lt;/strong&gt;: &lt;em&gt;Any application you add will restart as soon as it is closed. Some applications can be resource intensive and should be avoided.&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Text-based (Command-line) Option:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You will need to run a command like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.cerbere monitored-processes ['wingpanel', 'plank', 'slingshot-launcher --silent']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But edit the list of items, so for example, to add Google Chrome:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.cerbere monitored-processes ['wingpanel', 'plank', 'slingshot-launcher --silent','google-chrome']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to reset it run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.cerbere monitored-processes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="242" LastEditorDisplayName="user3" LastEditDate="2015-07-05T12:35:45.183" LastActivityDate="2015-07-05T12:35:45.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="241" PostTypeId="1" AcceptedAnswerId="251" CreationDate="2015-07-05T04:23:36.413" Score="15" ViewCount="8883" Body="&lt;p&gt;If I'm running a version of Ubuntu more recent than that on which elementary OS is based, can I install elementary's components onto it for a working elementary OS setup?&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="34" LastEditDate="2015-07-15T19:56:39.377" LastActivityDate="2015-07-15T19:56:39.377" Title="Can I &quot;convert&quot; a Ubuntu installation to an elementary installation?" Tags="|ppa|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="242" PostTypeId="5" CreationDate="2015-07-05T04:28:12.590" Score="0" Body="&lt;p&gt;elementary OS's official text and code editor.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;syntax highlighting&lt;/li&gt;&#xA;&lt;li&gt;tabs&lt;/li&gt;&#xA;&lt;li&gt;plugins&lt;/li&gt;&#xA;&lt;li&gt;themes&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/o29He.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="26" LastEditDate="2015-07-20T22:20:54.000" LastActivityDate="2015-07-20T22:20:54.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="243" PostTypeId="4" CreationDate="2015-07-05T04:28:12.590" Score="0" Body="For Questions related to code - the default text and code editor shipped with elementary OS" OwnerUserId="179" LastEditorUserId="16827" LastEditDate="2019-04-17T20:59:38.853" LastActivityDate="2019-04-17T20:59:38.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="244" PostTypeId="2" ParentId="224" CreationDate="2015-07-05T04:39:52.933" Score="3" Body="&lt;p&gt;You would have to download the code to the old greeter and compile it yourself, though I cannot guarantee that it would actually work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps, if you are proficient enough with coding, you can fork and update the old greeter to work with newer releases.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-05T04:39:52.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="245" PostTypeId="1" AcceptedAnswerId="254" CreationDate="2015-07-05T05:12:38.580" Score="10" ViewCount="827" Body="&lt;p&gt;I'm not referring to &lt;a href=&quot;http://gnomelook.org&quot; rel=&quot;nofollow&quot;&gt;Gnome Look&lt;/a&gt;, but an equivalent. Is there a similar site that only lists apps and themes for elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T12:36:43.120" LastActivityDate="2017-02-04T20:16:26.793" Title="Is there a site dedicated to elementary compatible apps and themes?" Tags="|applications|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="246" PostTypeId="1" AcceptedAnswerId="253" CreationDate="2015-07-05T05:14:00.587" Score="7" ViewCount="3752" Body="&lt;p&gt;Let's say I want to have plank run on the side of the screen as well as the bottom &lt;em&gt;at the same time&lt;/em&gt;, as can be done with some other docks - is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, how?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2020-07-17T12:47:59.027" Title="Can I run multiple instances of plank with separate settings?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="247" PostTypeId="1" AcceptedAnswerId="255" CreationDate="2015-07-05T05:21:27.003" Score="9" ViewCount="1283" Body="&lt;p&gt;Is there an IDE that is recommended by the elementary OS developers?&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T06:10:08.263" LastActivityDate="2016-04-24T06:10:35.203" Title="Is there an elementary IDE for developing elementary applications?" Tags="|applications|programming|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="248" PostTypeId="1" AcceptedAnswerId="249" CreationDate="2015-07-05T05:29:40.320" Score="5" ViewCount="141" Body="&lt;p&gt;I would like to have Music (&lt;code&gt;noise&lt;/code&gt;) use multiple folders as sources. Is this possible?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2017-02-19T07:54:05.697" Title="How can I use multiple folders as library sources in Music (noise)?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="249" PostTypeId="2" ParentId="248" CreationDate="2015-07-05T05:29:40.320" Score="11" Body="&lt;p&gt;Essentially, the official answer is that you cannot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, there is a workaround - you can use symlinks to trick Music into loading files from multiple folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, you can create a folder in your external hard drive and then &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/209/how-can-i-create-a-symbolic-link&quot;&gt;create a link&lt;/a&gt; to it in &lt;code&gt;~/Music&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Noise will be none the wiser, and will show all of your music from multiple locations without issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my system I've chosen to keep my music folder clear of symlinks, so I've instead created a folder called merged music, and placed links to the music folder and other locations where I've stored music files. This way I can fine tune my library in other apps without causing any issue with duplicates.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-19T07:54:05.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="250" PostTypeId="1" AcceptedAnswerId="252" CreationDate="2015-07-05T06:07:42.103" Score="25" ViewCount="9373" Body="&lt;p&gt;I know that some docks support folders. Does Plank? If so, how can I add them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example image here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/aviyh.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Design from &lt;a href=&quot;http://bassultra.deviantart.com/art/Plank-Folders-387841239&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="45" LastEditDate="2015-09-08T20:06:05.983" LastActivityDate="2015-12-14T15:00:10.807" Title="Can I add folders to the dock?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="251" PostTypeId="2" ParentId="241" CreationDate="2015-07-05T06:39:16.160" Score="12" Body="&lt;p&gt;You could install the elementary desktop and all the standard applications on top of your existing Unity desktop with these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll probably have to logout and switch to Pantheon in your display manager.&lt;/p&gt;&#xA;" OwnerUserId="142" LastEditorUserId="142" LastEditDate="2015-07-07T08:33:46.750" LastActivityDate="2015-07-07T08:33:46.750" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="252" PostTypeId="2" ParentId="250" CreationDate="2015-07-05T06:45:31.990" Score="35" Body="&lt;p&gt;Yes, Plank support folders for both apps and filesystem locations.&lt;/p&gt;&#xA;&lt;h1&gt;For Filesystem Locations&lt;/h1&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Find the path/folder you want to create a shortcut to in Files.&lt;/li&gt;&#xA;&lt;li&gt;Drag the folder to Plank.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h1&gt;For Apps&lt;/h1&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a folder in &lt;code&gt;~/.local/share/applications&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Copy in the desired applications from &lt;code&gt;/usr/share/applications/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Drag the folder to Plank.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/byjt6.png&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="211" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-09-09T02:30:42.070" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="253" PostTypeId="2" ParentId="246" CreationDate="2015-07-05T08:45:41.943" Score="11" Body="&lt;p&gt;Yes this is possible&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most of the elementary project has settings hard coded to a &lt;code&gt;gsettings&lt;/code&gt; XMl file. Gsettings is a gnome daemon to handle settings and manage them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Luckily, plank uses a separate file for storing preferences.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;First change the settings of the plank which is currently running with &lt;code&gt;plank --preferences&lt;/code&gt;. Change the position to the left or the right, because otherwise both planks will overlap.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then create the new dock with &lt;code&gt;plank -n one --preferences&lt;/code&gt;. The &lt;code&gt;one&lt;/code&gt; is just a name - you can choose a different one if you wish.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open system settings, go to applications then open the startup tab. Click on the + icon below and add the command &lt;code&gt;plank -n one&lt;/code&gt;. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then log out and back in, and you have set up two docks.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="94" LastEditorUserId="94" LastEditDate="2015-07-05T12:16:59.953" LastActivityDate="2015-07-05T12:16:59.953" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="254" PostTypeId="2" ParentId="245" CreationDate="2015-07-05T08:52:32.353" Score="10" Body="&lt;p&gt;There are a few websites&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://quassy.github.io/elementary-apps/apps/&quot; rel=&quot;nofollow&quot;&gt;Apps for elementary&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://madeforelementary.tumblr.com/&quot; rel=&quot;nofollow&quot;&gt;Made for elementary&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://lmelinux.net/apps-made-for-elementary-os/&quot; rel=&quot;nofollow&quot;&gt;lme Linux&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://allienworks.net/2015/elementary-os-freya-apps-tweaks/&quot; rel=&quot;nofollow&quot;&gt;Elementary OS Freya – Apps &amp;amp; tweaks&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="94" LastEditorUserId="3757" LastEditDate="2016-04-24T12:37:06.387" LastActivityDate="2016-04-24T12:37:06.387" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="255" PostTypeId="2" ParentId="247" CreationDate="2015-07-05T11:05:57.180" Score="10" Body="&lt;h1&gt;Scratch + Terminal + Developer Libraries&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Yep that's the set of software which are the official elementary SDK, as you can find out &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Scratch is better than notepad (that's included with Windows), but is still a newcomer. You can later give these text editors a try:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.geany.org&quot; rel=&quot;nofollow&quot;&gt;Geany&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.atom.io&quot; rel=&quot;nofollow&quot;&gt;Atom&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.sublimetext.com&quot; rel=&quot;nofollow&quot;&gt;Sublime text&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://wiki.gnome.org/Apps/Gedit&quot; rel=&quot;nofollow&quot;&gt;Gedit&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All run in elementary. All are Open Source &lt;em&gt;except&lt;/em&gt; &lt;strong&gt;Sublime Text&lt;/strong&gt; but you can run an evaluation version and then purchase a license if you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also the &lt;strong&gt;Github's Atom&lt;/strong&gt; is based on Web Technologies and is the most customizable and heaviest of all four.&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="3757" LastEditDate="2016-04-24T06:10:35.203" LastActivityDate="2016-04-24T06:10:35.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="256" PostTypeId="1" CreationDate="2015-07-05T11:13:41.083" Score="12" ViewCount="3447" Body="&lt;p&gt;When on Files, I'd like to be able to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;see the little icon overlays in files and folders that indicate whether they're up to date or synchronizing&lt;/li&gt;&#xA;&lt;li&gt;when right-clicking on a file or folder inside the Dropbox folder, have the usual Dropbox items (&quot;Get public link&quot;, &quot;Open in dropbox.com&quot;, etc.) in the context menu &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;What's the best/easiest way to achieve this?&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2016-09-14T11:33:05.247" LastActivityDate="2018-12-01T10:08:32.440" Title="How to integrate Dropbox with the file manager (Files)?" Tags="|applications|pantheon-files|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="257" PostTypeId="1" AcceptedAnswerId="263" CreationDate="2015-07-05T12:24:06.020" Score="10" ViewCount="2055" Body="&lt;p&gt;I think I read somewhere that some adjustment was possible, making LibreOffice fit in reasonably well with the rest of the system, but I can't find it anymore.&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorDisplayName="user3" LastEditDate="2015-07-08T09:42:26.980" LastActivityDate="2015-07-12T20:32:33.813" Title="Is there a way to theme LibreOffice to match the elementary design guidelines?" Tags="|software-installation|office|design|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="258" PostTypeId="2" ParentId="257" CreationDate="2015-07-05T12:32:55.590" Score="4" Body="&lt;p&gt;I'd suggest the sifr theme. Use this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice-gnome libreoffice-gtk libreoffice-style-sifr libreoffice-gtk3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2wnar5/theming_of_libreoffice_skype_and_other_popular/&quot; rel=&quot;nofollow noreferrer&quot;&gt;From reddit&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;However, a lot of people suggest customising the crystal theme.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice-style-crystal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type ‘Y’, and press enter to complete.&lt;/p&gt;&#xA;&lt;p&gt;Now, download the Faenza theme &lt;a href=&quot;https://dl.dropboxusercontent.com/u/35272968/elementaryupdate/images_crystal.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now, after downloading Faenza theme (Don’t worry about it being called images_crystal.zip – it’s the Faenza package, but it’s just been renamed to save you having to do so) you will need to obtain ‘Root Access‘ to be able to modify themes. So, into a Terminal copy and paste, or type out the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i pantheon-files /usr/share/libreoffice/share/config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, remove, or rename the &lt;code&gt;images_crystal.zip&lt;/code&gt; for in case anything goes wrong. I renamed it to &lt;code&gt;images_crystal_old.zip&lt;/code&gt;. Doing this ensures you have a fall-back should anything go wrong.&lt;/p&gt;&#xA;&lt;p&gt;Now, simply transfer your new &lt;code&gt;images_crystal.zip&lt;/code&gt; over to your Files window, and all being well, it should have appeared.&lt;/p&gt;&#xA;&lt;p&gt;Now, fire-up LibreOffice, and go to &lt;code&gt;Tools — Options — View&lt;/code&gt;, and change the theme to Crystal.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://web.archive.org/web/20131128085508/http://oselementaryluna.wordpress.com/2013/08/21/libreoffice-convert-the-ui-to-elementary-luna-beauty&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-05T12:32:55.590" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="259" PostTypeId="2" ParentId="202" CreationDate="2015-07-05T13:09:26.443" Score="2" Body="&lt;p&gt;First when it freezes press &lt;code&gt;ctrl-alt-Fx&lt;/code&gt; , &lt;code&gt;Fx&lt;/code&gt; is any of the &lt;code&gt;F1 F2 F3... etc.&lt;/code&gt; keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then there will be a terminal asking for login, Enter your user name and Password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that run the &lt;code&gt;top&lt;/code&gt; command. You will get a output of a table with the most CPU exhaustive applications listed at the top of the table. From here you can know which process is the bug. If it's an application then report it to one of there websites as a bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can after that restart yur computer from the terminal itself by using the command &lt;code&gt;sudo shutdown +0 -r&lt;/code&gt; increment &lt;code&gt;+0&lt;/code&gt; to increase the time in minutes after which the system shuts down and remove &lt;code&gt;-r&lt;/code&gt; to not restart the computer if you like.&lt;/p&gt;&#xA;" OwnerUserId="179" LastActivityDate="2015-07-05T13:09:26.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="260" PostTypeId="2" ParentId="101" CreationDate="2015-07-05T14:05:56.067" Score="24" Body="&lt;h2&gt;The default file manager &lt;strong&gt;Pantheon Files has a search option&lt;/strong&gt;:&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open the folder you need to search in&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; and the path bar will show a search glass icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;If you just open a folder and start typing your search, the search glass icon appears anyway, but then the search will NOT go within the sub-folders&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Just type there your search: a list of findings is immediately displayed&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Don't touch anything!&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Wait for it to finish without clicking anywhere on the desktop, or the search (and the list of findings) will close if the path-bar (now search bar) loses focus.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0VcVA.gif&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0VcVA.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Other solutions:&lt;/h2&gt;&#xA;&#xA;&lt;h2&gt;Nautilus&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;What I don't like about Pantheon Files' search is that the search results are &lt;a href=&quot;https://elementaryos.stackexchange.com/q/122/170&quot;&gt;not displayed in a proper window&lt;/a&gt;, just a list that is closed when it loses focus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, one may use of course other file managers that have a search function, like Nautilus. (I use Nautilus, because it is installed automatically with some applications that I need.) I see no disadvantage in having Nautilus alongside Pantheon Files.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Catfish&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Or you may use other popular search tools like &lt;code&gt;catfish&lt;/code&gt;. (&lt;code&gt;gnome-search-tool&lt;/code&gt; was already covered in a previous answer). Catfish is present in repos, so use Synaptic, or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install catfish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That can be added to the context menu in the file manager as indicated in another answer in relation to &lt;code&gt;gnome-search-tool&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;With &lt;code&gt;gedit&lt;/code&gt; as text editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/contractor/catfish_search.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Paste this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Search Here&#xA;Description=Find files&#xA;MimeType=inode;&#xA;Exec=catfish --path=%f %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and close text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/DyIuH.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zU4JV.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-05T10:44:24.023" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="261" PostTypeId="2" ParentId="231" CreationDate="2015-07-05T15:22:56.820" Score="8" Body="&lt;p&gt;A good suggestion is probably the IRC client &lt;strong&gt;&lt;a href=&quot;https://github.com/agronick/Relay&quot; rel=&quot;nofollow noreferrer&quot;&gt;Relay&lt;/a&gt;&lt;/strong&gt; currently in development by agronick and specifically aimed at elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:agronick/relay&#xA;sudo apt-get update&#xA;sudo apt-get install relay&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jnz95.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorDisplayName="user3" LastEditDate="2015-07-06T10:17:06.943" LastActivityDate="2015-07-06T10:17:06.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="262" PostTypeId="1" AcceptedAnswerId="352" CreationDate="2015-07-05T15:36:40.863" Score="5" ViewCount="2214" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install wine&#xA;    Reading package lists... Done&#xA;    Building dependency tree       &#xA;    Reading state information... Done&#xA;    Some packages could not be installed. This may mean that you have&#xA;    requested an impossible situation or if you are using the unstable&#xA;    distribution that some required packages have not yet been created&#xA;    or been moved out of Incoming.&#xA;    The following information may help to resolve the situation:&#xA;&#xA;    The following packages have unmet dependencies:&#xA;     wine : Depends: wine1.6 but it is not going to be installed&#xA;    E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install playonlinux&#xA;    Reading package lists... Done&#xA;    Building dependency tree       &#xA;    Reading state information... Done&#xA;    Some packages could not be installed. This may mean that you have&#xA;    requested an impossible situation or if you are using the unstable&#xA;    distribution that some required packages have not yet been created&#xA;    or been moved out of Incoming.&#xA;    The following information may help to resolve the situation:&#xA;&#xA;    The following packages have unmet dependencies:&#xA;     playonlinux : Depends: wine or&#xA;                            wine-unstable but it is not installable&#xA;    E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;While all PPAs are disabled and Ubuntu repos are enabled:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WaTAv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/irggh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise there isn't any problem with the packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -f install&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After following instructions from &lt;a href=&quot;https://askubuntu.com/a/142808&quot;&gt;askubuntu&lt;/a&gt;,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  sudo apt-get -u dist-upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, no fail here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the initial error persists in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens in Synaptic is different!&#xA;When trying to install &lt;code&gt;playonlinux&lt;/code&gt; the packages to be removed included all my system so to speak. That would have completely broken the system. It is too long a list to post here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to install &lt;code&gt;wine&lt;/code&gt;, it seems possible &#xA;&lt;img src=&quot;https://i.stack.imgur.com/5Rrwp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but this is contradicted by the terminal output posted above for &lt;code&gt;sudo apt-get install wine&lt;/code&gt;, and all this looks fishy to me.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to install &lt;code&gt;wine&lt;/code&gt; in Synaptic, it does not work in fact: once selected to be installed, the &lt;code&gt;wine&lt;/code&gt; package is marked as broken and some unmentioned packages are signaled as broken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/J9rUP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;How to identify the broken packages? Is it possible they being signaled as broken to be an error?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE after comment from &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3/tim&quot;&gt;Tim&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo apt-get install wine1.6&#xA;[sudo] password for cipeos: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; wine1.6 : Depends: wine1.6-i386 (= 1:1.6.2-0ubuntu4)&#xA;           Recommends: winbind but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE after &lt;a href=&quot;https://elementaryos.stackexchange.com/users/242/rolandixor&quot;&gt;RolandiXor&lt;/a&gt;' s answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/295/170&quot;&gt;answer&lt;/a&gt;, a certain dependency, shown in italics, has to be installed manually:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;code&gt;Wine1.6&lt;/code&gt; is &lt;code&gt;Wine1.6-i386&lt;/code&gt;, for &lt;code&gt;playonlinux&lt;/code&gt; is &lt;code&gt;python:any&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9ZlNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NYshV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE after trying to follow &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2188107&amp;amp;page=2&quot; rel=&quot;nofollow noreferrer&quot;&gt;this solution on ubuntuforums - Installing wine is not possible &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The idea is to make &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; support multiarch by adding [arch=amd64,i386] to the deb-line and also use &lt;code&gt;aptitude&lt;/code&gt;. And then, try &lt;code&gt;sudo aptitude --full-resolver -f install wine1.7&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo aptitude --full-resolver -f install wine1.7&#xA;[sudo] password for cipeos: &#xA;The following NEW packages will be installed:&#xA;  fonts-horai-umefont{a} fonts-wqy-microhei{a} libasn1-8-heimdal:i386{ab} libcapi20-3{a} libcapi20-3:i386{a} libdb5.3:i386{a} libexif12:i386{a} libgd3:i386{a} libgif4:i386{a} libglapi-mesa{a} &#xA;  libglapi-mesa:i386{a} libglu1-mesa:i386{a} libgphoto2-6:i386{ab} libgphoto2-port10:i386{ab} libgpm2:i386{a} libgssapi3-heimdal:i386{ab} libgstreamer-plugins-base0.10-0:i386{a} &#xA;  libgstreamer0.10-0:i386{a} libhcrypto4-heimdal:i386{ab} libheimbase1-heimdal:i386{ab} libheimntlm0-heimdal:i386{ab} libhx509-5-heimdal:i386{ab} libieee1284-3:i386{a} &#xA;  libkrb5-26-heimdal:i386{ab} liblcms2-2:i386{ab} libldap-2.4-2:i386{a} libltdl7:i386{a} libmpg123-0:i386{a} libncurses5:i386{a} libodbc1{a} libopenal1:i386{a} libosmesa6{a} libosmesa6:i386{a} &#xA;  libpcap0.8:i386{a} libroken18-heimdal:i386{ab} libsane:i386{ab} libsane-common:i386{ab} libsasl2-2:i386{a} libsasl2-modules:i386{a} libsasl2-modules-db:i386{a} libusb-1.0-0:i386{a} &#xA;  libv4l-0:i386{a} libv4lconvert0:i386{a} libvpx1:i386{a} libwind0-heimdal:i386{ab} libxpm4:i386{a} ocl-icd-libopencl1{a} ocl-icd-libopencl1:i386{a} p11-kit-modules:i386{a} p7zip{a} &#xA;  ttf-wqy-microhei{a} unixodbc{a} wine-gecko2.34{a} wine-gecko2.34:i386{a} wine-mono4.5.4{a} wine1.7 wine1.7-amd64{a} wine1.7-i386:i386{a} winetricks{a} &#xA;0 packages upgraded, 59 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 168 MB of archives. After unpacking 543 MB will be used.&#xA;The following packages have unmet dependencies:&#xA; liblcms2-2 : Breaks: liblcms2-2:i386 (!= 2.6-3ubuntu1~trusty1) but 2.6-3ubuntu1~trusty is to be installed.&#xA; liblcms2-2:i386 : Breaks: liblcms2-2 (!= 2.6-3ubuntu1~trusty) but 2.6-3ubuntu1~trusty1 is installed.&#xA; libsane-common : Conflicts: libsane-common:i386 but 1.0.23-3ubuntu3 is to be installed.&#xA; libsane-common:i386 : Conflicts: libsane-common but 1.0.23-3ubuntu3.1 is installed.&#xA; libkrb5-26-heimdal : Breaks: libkrb5-26-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libkrb5-26-heimdal:i386 : Breaks: libkrb5-26-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libroken18-heimdal : Breaks: libroken18-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libroken18-heimdal:i386 : Breaks: libroken18-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libwind0-heimdal : Breaks: libwind0-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libwind0-heimdal:i386 : Breaks: libwind0-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libhcrypto4-heimdal : Breaks: libhcrypto4-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libhcrypto4-heimdal:i386 : Breaks: libhcrypto4-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libheimntlm0-heimdal : Breaks: libheimntlm0-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libheimntlm0-heimdal:i386 : Breaks: libheimntlm0-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; xserver-xorg-lts-utopic : Conflicts: libglapi-mesa (&amp;gt;= 0~) but 10.1.0-4ubuntu5 is to be installed.&#xA;                           Conflicts: libglapi-mesa:i386 (&amp;gt;= 0~) but 10.1.0-4ubuntu5 is to be installed.&#xA; libgphoto2-port10 : Breaks: libgphoto2-port10:i386 (!= 2.5.3.1-1ubuntu2.2) but 2.5.3.1-1ubuntu2 is to be installed.&#xA; libgphoto2-port10:i386 : Breaks: libgphoto2-port10 (!= 2.5.3.1-1ubuntu2) but 2.5.3.1-1ubuntu2.2 is installed.&#xA; libasn1-8-heimdal : Breaks: libasn1-8-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libasn1-8-heimdal:i386 : Breaks: libasn1-8-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libsane : Breaks: libsane:i386 (!= 1.0.23-3ubuntu3.1) but 1.0.23-3ubuntu3 is to be installed.&#xA; libsane:i386 : Breaks: libsane (!= 1.0.23-3ubuntu3) but 1.0.23-3ubuntu3.1 is installed.&#xA; libheimbase1-heimdal : Breaks: libheimbase1-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libheimbase1-heimdal:i386 : Breaks: libheimbase1-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libgphoto2-6 : Breaks: libgphoto2-6:i386 (!= 2.5.3.1-1ubuntu2.2) but 2.5.3.1-1ubuntu2 is to be installed.&#xA; libgphoto2-6:i386 : Breaks: libgphoto2-6 (!= 2.5.3.1-1ubuntu2) but 2.5.3.1-1ubuntu2.2 is installed.&#xA; libglapi-mesa-lts-utopic : Conflicts: libglapi-mesa but 10.1.0-4ubuntu5 is to be installed.&#xA;                            Conflicts: libglapi-mesa:i386 but 10.1.0-4ubuntu5 is to be installed.&#xA; libglapi-mesa-lts-utopic:i386 : Conflicts: libglapi-mesa but 10.1.0-4ubuntu5 is to be installed.&#xA;                                 Conflicts: libglapi-mesa:i386 but 10.1.0-4ubuntu5 is to be installed.&#xA; libgssapi3-heimdal : Breaks: libgssapi3-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libgssapi3-heimdal:i386 : Breaks: libgssapi3-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA; libhx509-5-heimdal : Breaks: libhx509-5-heimdal:i386 (!= 1.6~git20131207+dfsg-1ubuntu1.1) but 1.6~git20131207+dfsg-1ubuntu1 is to be installed.&#xA; libhx509-5-heimdal:i386 : Breaks: libhx509-5-heimdal (!= 1.6~git20131207+dfsg-1ubuntu1) but 1.6~git20131207+dfsg-1ubuntu1.1 is installed.&#xA;The following actions will resolve these dependencies:&#xA;&#xA;      Keep the following packages at their current version:&#xA;1)      libasn1-8-heimdal:i386 [Not Installed]             &#xA;2)      libglapi-mesa [Not Installed]                      &#xA;3)      libglapi-mesa:i386 [Not Installed]                 &#xA;4)      libgphoto2-6:i386 [Not Installed]                  &#xA;5)      libgphoto2-port10:i386 [Not Installed]             &#xA;6)      libgssapi3-heimdal:i386 [Not Installed]            &#xA;7)      libhcrypto4-heimdal:i386 [Not Installed]           &#xA;8)      libheimbase1-heimdal:i386 [Not Installed]          &#xA;9)      libheimntlm0-heimdal:i386 [Not Installed]          &#xA;10)     libhx509-5-heimdal:i386 [Not Installed]            &#xA;11)     libkrb5-26-heimdal:i386 [Not Installed]            &#xA;12)     liblcms2-2:i386 [Not Installed]                    &#xA;13)     libldap-2.4-2:i386 [Not Installed]                 &#xA;14)     libosmesa6 [Not Installed]                         &#xA;15)     libosmesa6:i386 [Not Installed]                    &#xA;16)     libroken18-heimdal:i386 [Not Installed]            &#xA;17)     libsane:i386 [Not Installed]                       &#xA;18)     libsane-common:i386 [Not Installed]                &#xA;19)     libwind0-heimdal:i386 [Not Installed]              &#xA;20)     wine1.7 [Not Installed]                            &#xA;21)     wine1.7-amd64 [Not Installed]                      &#xA;22)     wine1.7-i386:i386 [Not Installed]                  &#xA;&#xA;      Leave the following dependencies unresolved:         &#xA;23)     winetricks recommends wine                         &#xA;24)     wine1.7-amd64 recommends libosmesa6                &#xA;25)     wine-gecko2.34 recommends wine1.5-amd64            &#xA;26)     wine1.7-i386:i386 recommends libosmesa6:i386       &#xA;27)     wine1.7-i386:i386 recommends libsane:i386          &#xA;28)     wine-gecko2.34:i386 recommends wine1.5-i386:i386   &#xA;&#xA;&#xA;Accept this solution? [Y/n/q/?] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems that &lt;code&gt;aptitude&lt;/code&gt; gives a lot more info. But trying a few options there it comes down to installing 0.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2015-07-09T13:37:47.533" Title="Cannot install wine and playonlinux" Tags="|software-installation|apt|package-management|wine|playonlinux|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="263" PostTypeId="2" ParentId="257" CreationDate="2015-07-05T15:44:59.310" Score="10" Body="&lt;p&gt;The folks from Xubuntu are currently working on an &lt;a href=&quot;https://github.com/shimmerproject/libreoffice-style-elementary&quot; rel=&quot;nofollow&quot;&gt;elementary icon theme for LibreOffice in Github&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-07-12T20:32:33.813" LastActivityDate="2015-07-12T20:32:33.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="264" PostTypeId="1" AcceptedAnswerId="270" CreationDate="2015-07-05T15:46:19.163" Score="3" ViewCount="1716" Body="&lt;p&gt;What would be the content of a &lt;code&gt;.contract&lt;/code&gt; file in /&lt;code&gt;usr/share/contractor&lt;/code&gt; for a menu entry like 'Mount iso'?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="300" LastEditDate="2015-07-14T18:45:55.880" LastActivityDate="2015-07-14T18:45:55.880" Title="Contract file to mount iso?" Tags="|pantheon-files|menu|mount|iso|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="265" PostTypeId="2" ParentId="236" CreationDate="2015-07-05T16:34:56.200" Score="6" Body="&lt;p&gt;This is untested but will probably work. If it doesn't I'll check why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Adapting the base session startup programs may already be enough, those are found in &lt;code&gt;/usr/share/gnome-session/sessions/pantheon.session&lt;/code&gt;. Replace gala with the appropriate process name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking at cerbere's monitored processes list, it looks like it's currently not restarting the WM. If you want to change that, you have to add it at &lt;code&gt;org.pantheon.cerbere.monitored-processes&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="83" LastActivityDate="2015-07-05T16:34:56.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="266" PostTypeId="2" ParentId="264" CreationDate="2015-07-05T16:43:15.147" Score="0" Body="&lt;p&gt;Can't guarantee that it'll work, but something along the lines of this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Mount ISO&#xA;Icon=ubiquity&#xA;Description=Mount ISO file to /mnt&#xA;MimeType=application/iso-image&#xA;Exec=pkexec mount -o loop %f /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Some notes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;icons are found at &lt;code&gt;/usr/share/icons/elementary&lt;/code&gt;. You can just put the appropriate name in.&lt;/li&gt;&#xA;&lt;li&gt;the exec part is the relevant one. pkexec uses polkit to authorize an action that will require administrative privileges, such as using mount. If you want to put more effort into it, you may be able to use GNOME's mounting services to mount without using your password. &lt;code&gt;%f&lt;/code&gt; will be replaced by the file's path.&lt;/li&gt;&#xA;&lt;li&gt;since a contract only gets a file as argument, you can't specify the location. So you must either invoke a dialog (cheap solution would be a bash-invokable program like &lt;code&gt;zenity&lt;/code&gt;) to ask for the location or use a default one, like &lt;code&gt;/mnt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Maybe check the mime type, I don't have an ISO file handy to check it right now. Just right click and go to properties to find out.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="83" LastActivityDate="2015-07-05T16:43:15.147" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="267" PostTypeId="2" ParentId="256" CreationDate="2015-07-05T17:03:04.627" Score="-6" Body="&lt;p&gt;One option I used a while back is to switch from &lt;code&gt;pantheon-files&lt;/code&gt; to &lt;code&gt;nautilus&lt;/code&gt; (and its &lt;code&gt;nautilus-dropbox&lt;/code&gt;), which should be avalible by default in your repositories.&lt;/p&gt;&#xA;" OwnerUserId="49" LastActivityDate="2015-07-05T17:03:04.627" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="268" PostTypeId="2" ParentId="256" CreationDate="2015-07-05T17:56:41.940" Score="12" Body="&lt;p&gt;The elementary OS daily PPA contains a Dropbox plugin for Pantheon, which seems a little bit outdated but still works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please don't add elementary-daily-PPA to your sources, it is for testing purposes only and may break your system!&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead download the plugin and install it manually:&lt;br&gt;&#xA;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily/+files/pantheon-files-plugin-dropbox_0.1-0%7E22%7Esaucy1_i386.deb&quot; rel=&quot;noreferrer&quot;&gt;pantheon-files-plugin-dropbox i386&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily/+files/pantheon-files-plugin-dropbox_0.1-0%7E22%7Esaucy1_amd64.deb&quot; rel=&quot;noreferrer&quot;&gt;pantheon-files-plugin-dropbox amd64&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a small bug in this package, but luckily we can fix it. &#xA;After you installed &lt;code&gt;pantheon-files-plugin&lt;/code&gt;, start pantheon in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now take a closer look at the output in the terminal. If you see this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_WARN 23:17:33.808365] PluginManager.vala:128: Failed to load module from path '/usr/lib/pantheon-files/plugins/libmarlin-dropbox.so': libmarlincore.so.0: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;close all instances of &lt;code&gt;pantheon files&lt;/code&gt; and run this command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/lib/libpantheon-files-core.so.0 /usr/lib/libmarlincore.so.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run &lt;code&gt;pantheon-files&lt;/code&gt; in the terminal again, the error message must be gone now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately the default elementary OS icon theme doesn't provide the necessary emblem icons. I've created some of my own and pushed them to &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;noreferrer&quot;&gt;elementary+&lt;/a&gt;. After you installed this icon theme (just follow the instructions on their GitHub page), you should see nice overlay icons and have a right click context-menu in your Dropbox folder:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Te9sK.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-07-12T20:58:55.740" LastActivityDate="2015-07-12T20:58:55.740" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="269" PostTypeId="1" AcceptedAnswerId="273" CreationDate="2015-07-05T18:46:47.457" Score="14" ViewCount="2947" Body="&lt;p&gt;I've been using the thin scrollbars for many months now but still haven't gotten used to them. Is there a way to make them look and behave like classic scrollbars, i.e. thick and directly grab-able?&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="45" LastEditDate="2015-12-03T00:39:48.333" LastActivityDate="2015-12-03T00:39:48.333" Title="How can I make the scrollbars thicker?" Tags="|luna|scrollbars|" AnswerCount="2" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="270" PostTypeId="2" ParentId="264" CreationDate="2015-07-05T19:00:03.667" Score="6" Body="&lt;p&gt;Having installed &lt;code&gt;gnome-disk-utility&lt;/code&gt; I already had &lt;em&gt;Open With &gt; Disc Image Mounter&lt;/em&gt; in context menu and a &lt;code&gt;gnome-desk-image-mounter.desktop&lt;/code&gt; file in &lt;code&gt;/usr/share/applications&lt;/code&gt;. Looking into that, I have created a &lt;code&gt;.contract&lt;/code&gt; file that works with the same consequence (and so is a bit pointless, adding nothing, although answers the question):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/contractor/mount_iso.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Mount &#xA;Icon=drive-removable-media&#xA;Description=Mount ISO file &#xA;MimeType=application/x-cd-image;application/x-raw-disk-image&#xA;Exec=gnome-disk-image-mounter %f&#xA;Terminal=false&#xA;StartupNotify=false&#xA;Type=Application&#xA;NoDisplay=true&#xA;X-Ubuntu-Gettext-Domain=gnome-disk-utility&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just like with  Disc Image Mounter, the image is not yet mounted, but added to the file manager sidebar list of drives and mounted from there&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jSVen.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KxfZ9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2015-07-05T19:00:03.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="271" PostTypeId="1" CreationDate="2015-07-05T19:31:29.213" Score="18" ViewCount="9894" Body="&lt;p&gt;Back in the Luna days I used ibus to type in Japanese, and could switch between input methods using &lt;kbd&gt;Ctrl&lt;/kbd&gt;&lt;kbd&gt;Space&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Freya, I've tried to install ibus through the terminal, looking through the &lt;a href=&quot;https://wiki.archlinux.org/index.php/IBus&quot;&gt;ibus page&lt;/a&gt; on the Arch Linux wiki and following instructions there, and all to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to get ibus working, or and alternative method that will work just as well?&lt;/p&gt;&#xA;" OwnerUserId="120" LastEditorUserId="68" LastEditorDisplayName="user3" LastEditDate="2015-07-17T12:09:00.900" LastActivityDate="2019-12-09T10:48:37.153" Title="How can I enable Japanese input?" Tags="|input|keyboard|typing|ibus|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="272" PostTypeId="1" CreationDate="2015-07-05T21:41:22.787" Score="5" ViewCount="2002" Body="&lt;p&gt;I have elementary OS on 2 ageing laptops and my main PC. Both laptops display properly but the PC is wonky.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Monitor is a 1920x1080 Samsung All-in-one Win 8.1.  I built an AMD64 based linux PC and am running elementary OS and Sparky on it, using the AIO as it's monitor through HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr&lt;/code&gt; seems to indicate that it is displaying properly but UI elements are huge compared to the other 2 installations.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384&#xA;DVI-0 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm&#xA;   1920x1080      60.0*+   50.0     59.9  &#xA;   1920x1080i     60.1     50.0     60.0  &#xA;   1680x1050      59.9  &#xA;   1600x900       60.0  &#xA;   1280x1024      75.0     60.0  &#xA;   1440x900       75.0     59.9  &#xA;   1280x960       60.0  &#xA;   1280x800       59.9  &#xA;   1152x864       75.0  &#xA;   1280x720       60.0     50.0     59.9  &#xA;   1024x768       75.1     70.1     60.0  &#xA;   832x624        74.6  &#xA;   800x600        72.2     75.0     60.3     56.2  &#xA;   720x576        50.0  &#xA;   720x480        60.0     59.9  &#xA;   640x480        75.0     72.8     66.7     60.0     59.9  &#xA;   720x400        70.1 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Wingpanel, window titlebars and many other elements are much larger than expected. &#xA;&lt;img src=&quot;https://i.stack.imgur.com/uwn8S.png&quot; alt=&quot;screenshot&quot;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cursor size sometimes grows much larger. There's always a small difference between browser windows(larger) and desktop (smaller) but in the file explorer windows (for example) it is much larger. Only while in the file list, not while on the left folder list. Sorry about crappy pics,had to use cam for this, screenshot not showing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/l8DBjm.jpg&quot; alt=&quot;Small cursor&quot;&gt; &lt;img src=&quot;https://i.stack.imgur.com/715c7m.jpg&quot; alt=&quot;Large cursor&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="273" LastEditorUserId="34" LastEditDate="2015-07-15T19:57:17.513" LastActivityDate="2015-07-15T19:57:17.513" Title="Unusual display resolution issue" Tags="|user-interface|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="273" PostTypeId="2" ParentId="269" CreationDate="2015-07-05T23:17:35.000" Score="8" Body="&lt;p&gt;Had same issues and found out a workaround.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For Luna:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Uninstall the &lt;code&gt;scrollbar-overlay-*&lt;/code&gt; packages that draw the scrollbar handle when you hover the scrollbars (otherwise the next steps won't have any effect):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove scrollbar-overlay-*&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit (with superuser permissions), the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/themes/elementary/gtk-3.0/scrollbar.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-GtkRange-slider-width: 3;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can increase the scrollbar width from its default value (3) to your needs - for me it is 10. This affects applications like the file manager, the terminal, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You also need to change the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;border-radius: 10px;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(in the &lt;code&gt;.scrollbar.button {&lt;/code&gt; section) to use something like &lt;code&gt;2px&lt;/code&gt;, otherwise the scrollbars will have completely round ends and won't match the applications using gtk2.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit (also with superuser permissions), the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/themes/elementary/gtk-2.0/gtkrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GtkScrollbar      ::slider-width         = 6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to a value 2 px larger than the used in step 2, which in this case would be 12. This affects applications like Firefox, and makes the scrollbar have the same apparent width as the ones affected by step 2.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For Freya:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can skip step 1, and in step 2 the file to edit is &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&lt;/code&gt; (rather than &lt;code&gt;scrollbar.css&lt;/code&gt;). The rest of the instructions are the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Notes:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This is just a workaround and can be overwritten during updates! If anyone has a permanent solution, I would appreciate if he post it here. My &quot;permanent solution&quot; are two patch files and a bash script...&lt;/li&gt;&#xA;&lt;li&gt;If you do not use the default theme &quot;elementary&quot;, the paths to the files differ (&lt;code&gt;/usr/share/themes/THEMENAME/gtk...&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Since step #2 affects applications like Terminal that have a dark theme, as well as the remaining ones using a lighter theme, you might want to play with the value of &lt;code&gt;background-color&lt;/code&gt; when editing &lt;code&gt;scrollbar.css&lt;/code&gt; (in the &lt;code&gt;.scrollbar.trough {&lt;/code&gt; section). I found that something like  &lt;code&gt;background-color: alpha(#FFF, 0.5);&lt;/code&gt; (changed from the default &lt;code&gt;background-color: @base_color&lt;/code&gt;) provides a good compromise.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="84" LastEditDate="2015-08-17T11:33:26.047" LastActivityDate="2015-08-17T11:33:26.047" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="274" PostTypeId="2" ParentId="272" CreationDate="2015-07-06T01:00:15.913" Score="1" Body="&lt;p&gt;From what you describe, your problem is with the scaling factor of your UI. This might be due to the resolution the system is detecting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install Tweak Tool (works in elementary).&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install gnome-tweak-tool&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run Tweak Tool (&lt;code&gt;gnome-tweak-tool&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Find the Window scaling option under &quot;Windows&quot;.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/J27FD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;From here, you can adjust the scaling factor, until it looks as you would expect. &lt;strong&gt;Be careful not to set it to too low of a value!&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="242" LastEditorUserId="242" LastEditDate="2015-07-06T01:16:00.323" LastActivityDate="2015-07-06T01:16:00.323" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="275" PostTypeId="2" ParentId="250" CreationDate="2015-07-06T05:54:22.497" Score="4" Body="&lt;p&gt;You can use Gnome-Pie as an alternative to grouping applications in the dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:simonschneegans/testing&#xA;sudo apt-get update&#xA;sudo apt-get install gnome-pie&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Video demonstration on &lt;a href=&quot;https://vimeo.com/125339537&quot; rel=&quot;nofollow&quot;&gt;Vimeo&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorDisplayName="user3" LastEditDate="2015-07-12T20:45:21.483" LastActivityDate="2015-07-12T20:45:21.483" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="276" PostTypeId="1" AcceptedAnswerId="283" CreationDate="2015-07-06T06:00:51.613" Score="15" ViewCount="18806" Body="&lt;p&gt;I would like to install Google Drive client in Freya. Does anyone knows a Google Drive client that supports elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="129" LastActivityDate="2018-07-12T12:57:20.700" Title="How to install Google Drive?" Tags="|software-recommendation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="277" PostTypeId="1" AcceptedAnswerId="280" CreationDate="2015-07-06T06:47:48.080" Score="10" ViewCount="751" Body="&lt;p&gt;Although pantheon-terminal does actually appear to be applying colours to filenames, it is not those defined in &lt;code&gt;$LS_COLORS&lt;/code&gt;. For example &lt;code&gt;ls&lt;/code&gt; should display executable files as bright green (&lt;code&gt;ex=01;32&lt;/code&gt;), though is instead using a barely visible gray. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand if the UX designers wish to apply a separate colour scheme in pantheon-terminal to blend better with the rest of the interface, though the colours getting applied now are unworkable. To test yourself view the output of &lt;code&gt;ls /bin&lt;/code&gt; in both a pantheon-terminal and a VT (&lt;em&gt;Ctrl+Alt+F1&lt;/em&gt;). In the pantheon-terminal selecting the text with a cursor will show a silhouette of the 'missing' text. Colours &lt;strong&gt;are&lt;/strong&gt; displayed correctly in the VT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/FnLXj.png&quot; alt=&quot;pantheon-terminal ls example&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-05-07T03:49:28.857" LastActivityDate="2016-10-02T14:31:35.180" Title="Where are dircolors defined for pantheon terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="278" PostTypeId="1" AcceptedAnswerId="306" CreationDate="2015-07-06T07:38:42.383" Score="8" ViewCount="5497" Body="&lt;p&gt;I have installed elementary OS Freya on UEFI in the same way that I installed it on legacy mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I can't boot to Freya and there is no Grub on start-up. I also tried to create an entry for Grub (or Grub2) with EasyBCD on Windows 8.1 and install MBR but can't find any boot loader for Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any other way to install Freya on UEFI? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other Linux distributions like Fedora support UEFI by default (They create a &lt;code&gt;/boot/EFI&lt;/code&gt; alongside the Microsoft boot loader).&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="190" LastEditDate="2015-07-07T02:41:11.203" LastActivityDate="2016-04-04T08:36:12.890" Title="Cannot boot Freya after installing alongside Windows on UEFI" Tags="|release-freya|uefi|dual-boot|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="279" PostTypeId="1" AcceptedAnswerId="281" CreationDate="2015-07-06T07:46:14.453" Score="2" ViewCount="89" Body="&lt;p&gt;I would like update Geary to the newest version!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible or is there something special to know?&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorDisplayName="user3" LastEditDate="2015-07-06T09:42:57.920" LastActivityDate="2015-07-06T09:42:57.920" Title="How can I update apps like Geary to the newest version?" Tags="|updates|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="280" PostTypeId="2" ParentId="277" CreationDate="2015-07-06T08:39:25.613" Score="7" Body="&lt;p&gt;Ahh. I found the &lt;em&gt;palette&lt;/em&gt; key located in dconf tools, in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.pantheon.terminal.settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Clicking &lt;strong&gt;Set to Default&lt;/strong&gt; has made the colours much nicer. You can also run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.settings palette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm not sure why this was necessary as I've never changed any of these settings before. Either way it works great now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; In hindsight I suspect this was caused by elementary tweaks.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="578" LastEditorDisplayName="user3" LastEditDate="2016-10-02T14:31:35.180" LastActivityDate="2016-10-02T14:31:35.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="281" PostTypeId="2" ParentId="279" CreationDate="2015-07-06T08:53:27.407" Score="3" Body="&lt;p&gt;Latest version of Geary is not available for Freya and Ubuntu 14.04, but the developers plan to backport it. See &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1464472&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt; for details. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also post a &lt;a href=&quot;https://www.bountysource.com/issues/21620167-backport-latest-geary&quot; rel=&quot;nofollow&quot;&gt;bounty&lt;/a&gt; for this bug.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-07-06T09:05:20.343" LastActivityDate="2015-07-06T09:05:20.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="283" PostTypeId="2" ParentId="276" CreationDate="2015-07-06T11:41:21.100" Score="26" Body="&lt;p&gt;Google itselft doesn't provide a linux-client for Google Drive, but there are several third-party clients:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Grive 2&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/vitalif/grive2&quot; rel=&quot;nofollow noreferrer&quot;&gt;Grive 2&lt;/a&gt; is the fork of the original command line client &lt;a href=&quot;https://github.com/Grive/grive&quot; rel=&quot;nofollow noreferrer&quot;&gt;Grive&lt;/a&gt;.&lt;br&gt;&#xA;There are a few things that Grive does not do at the moment:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;continously wait for changes in file system or in Google Drive to occur and upload. A sync is only performed when you run Grive, and it calculates checksums for all files every time.&lt;/li&gt;&#xA;&lt;li&gt;symbolic links support.&lt;/li&gt;&#xA;&lt;li&gt;support for Google documents.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;These may be added in the future, possibly the next release.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Installation&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt-get update&#xA;sudo apt-get install grive&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Authorization&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;When Grive is run for the first time, you should use the &lt;code&gt;-a&lt;/code&gt; argument to grant permission to Grive to access to your Google Drive.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/grive&#xA;cd ~/grive&#xA;grive -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A URL should be printed. Go to the link. You will need to login to your Google account if you haven't done so. After granting the permission to Grive, the browser will show you an authenication code. Copy-and-paste that to the standard input of Grive.&lt;br&gt;&#xA;If everything works fine, Grive will create &lt;code&gt;.grive&lt;/code&gt; and &lt;code&gt;.grive_state&lt;/code&gt; files in your current directory. It will also start downloading files from your Google Drive to your current directory.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;jdrivesync&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/siom79/jdrivesync&quot; rel=&quot;nofollow noreferrer&quot;&gt;jdrivesync&lt;/a&gt; is a simple command line tool that synchronizes a local file system structure to your Google Drive.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Features&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Scalability&lt;/li&gt;&#xA;&lt;li&gt;Multi-User&lt;/li&gt;&#xA;&lt;li&gt;Partial Sync&lt;/li&gt;&#xA;&lt;li&gt;Up or down synchronization&lt;/li&gt;&#xA;&lt;li&gt;Reporting&lt;/li&gt;&#xA;&lt;li&gt;No application-specific metadata&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Installation&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Download the &lt;a href=&quot;https://github.com/siom79/jdrivesync/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;latest released DEB&lt;/a&gt; and install it manually.&lt;br&gt;&#xA;Please note that jdrivesync requires openjdk-8-jre. How to install openjdk in version 8 for Ubuntu &amp;lt;14.10 is explained &lt;a href=&quot;https://askubuntu.com/questions/464755/how-to-install-openjdk-8-on-14-04-lts&quot;&gt;here&lt;/a&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After successful installation you can start jdrivesync with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/opt/jdrivesync/jdrivesync.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Authorization&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;When you start jdrivesync for the first time it will print an authentication URL. You will have to point your browser to this URL, login with your Google account and grant jdrivesync the requested privileges. After having clicked on &lt;code&gt;Accept&lt;/code&gt; you will be redirected to a new page that displays an authentication token. Copy this token to the command line and press Enter.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;google-drive-ocamlfuse&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/astrada/google-drive-ocamlfuse&quot; rel=&quot;nofollow noreferrer&quot;&gt;google-drive-ocamlfuse&lt;/a&gt; is a FUSE filesystem backed by Google Drive, written in OCaml. It lets you mount your Google Drive on Linux.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Features&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Full read/write access to ordinary files and folders&lt;/li&gt;&#xA;&lt;li&gt;Read-only access to Google Docs, Sheets, and Slides (exported to configurable formats)&lt;/li&gt;&#xA;&lt;li&gt;Multiple account support&lt;/li&gt;&#xA;&lt;li&gt;Duplicate file handling&lt;/li&gt;&#xA;&lt;li&gt;Access to trash (.Trash directory)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Installation&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:alessandro-strada/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install google-drive-ocamlfuse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Authorization&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To understand how the authorization process works, and to discover all the available options, follow the instuctions at the &lt;a href=&quot;https://github.com/astrada/google-drive-ocamlfuse/wiki/Authorization&quot; rel=&quot;nofollow noreferrer&quot;&gt;authorization page&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Insync&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.insynchq.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Insync&lt;/a&gt; is the most feature rich multi platform client for Google Drive.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Insync is not for free, a lifetime license per Google account costs &lt;a href=&quot;https://www.insynchq.com/pricing&quot; rel=&quot;nofollow noreferrer&quot;&gt;20$&lt;/a&gt;. In my opinion it is totally worth it. I'm using this client for some time now, and it's working without any problems or hiccups.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Insync is going to add pantheon support soon (according to their support forums).&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Features&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Multiple accounts&lt;/li&gt;&#xA;&lt;li&gt;Convert Google Docs to Office&lt;/li&gt;&#xA;&lt;li&gt;Convert to OpenDocument&lt;/li&gt;&#xA;&lt;li&gt;Symlink, junction and alias&lt;/li&gt;&#xA;&lt;li&gt;External &amp;amp; network drives&lt;/li&gt;&#xA;&lt;li&gt;Desktop notifications&lt;/li&gt;&#xA;&lt;li&gt;Name your own folder &lt;/li&gt;&#xA;&lt;li&gt;Revert read-only files &lt;/li&gt;&#xA;&lt;li&gt;Feed of file changes&lt;/li&gt;&#xA;&lt;li&gt;Nested selective sync&lt;/li&gt;&#xA;&lt;li&gt;Preserve directory structure&lt;/li&gt;&#xA;&lt;li&gt;Ignore List&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Installation&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO - https://d2t3ff60b2tol4.cloudfront.net/services@insynchq.com.gpg.key | sudo apt-key add -&#xA;echo &quot;deb http://apt.insynchq.com/ubuntu trusty non-free contrib&quot; | sudo tee --append /etc/apt/sources.list.d/insync-trusty.list&#xA;sudo apt-get update&#xA;sudo apt-get install insync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Authorization&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The authorization is GUI driven and self-explanatory.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;elementary OS integration&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I've created a complete set of matching icons (including indicator, mimetype, folder, emblems application icon) and pushed them to &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary+&lt;/a&gt;:&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/Jgu8u.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/dVpQi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kPPHU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/1TY4Q.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="14857" LastEditDate="2018-07-12T12:57:20.700" LastActivityDate="2018-07-12T12:57:20.700" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="284" PostTypeId="1" AcceptedAnswerId="285" CreationDate="2015-07-06T15:34:59.697" Score="5" ViewCount="257" Body="&lt;p&gt;How can I see a list with the names of the different icon sets and themes I've installed in elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see them listed if I use elementary-tweaks, but that app is &lt;a href=&quot;https://plus.google.com/u/0/+MichaelStarkweather/posts/Y8zixFDEWiv&quot; rel=&quot;nofollow&quot;&gt;not maintained anymore&lt;/a&gt; and &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/38z164/what_is_the_elementary_teams_stance_on_elementary/crz5dsf&quot; rel=&quot;nofollow&quot;&gt;not recommended by Daniel&lt;/a&gt;, so I'm trying to avoid using it.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="3757" LastEditDate="2016-04-24T12:37:36.000" LastActivityDate="2016-04-24T12:37:36.000" Title="List installed icon sets and themes" Tags="|icons|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="285" PostTypeId="2" ParentId="284" CreationDate="2015-07-06T15:39:36.560" Score="5" Body="&lt;p&gt;They are all in one of two places, so this command should work:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/icons 2&amp;gt; /dev/null &amp;amp;&amp;amp; for dir in *; do if [ &quot;$(ls $dir | grep -o -m 1 cursor)&quot; = &quot;&quot; ]; then echo $dir; fi; done &amp;amp;&amp;amp; cd ~/.icons 2&amp;gt; /dev/null &amp;amp;&amp;amp; for dir in *; do if [ &quot;$(ls $dir | grep -o -m 1 cursor)&quot; = &quot;&quot; ]; then echo $dir; fi; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will show something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;App.png&#xA;cab_extract.png&#xA;cab_view.png&#xA;default&#xA;default.kde4&#xA;Faience&#xA;Faience-Azur&#xA;Faience-Claire&#xA;Faience-Ocre&#xA;gnome&#xA;hicolor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-06T17:52:12.390" LastActivityDate="2015-07-06T17:52:12.390" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="286" PostTypeId="2" ParentId="269" CreationDate="2015-07-06T16:59:17.970" Score="4" Body="&lt;p&gt;You'll need to remove the &lt;code&gt;overlay-scrollbar-*&lt;/code&gt; packages from your system and then log out or restart&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-06T16:59:17.970" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="288" PostTypeId="1" AcceptedAnswerId="603" CreationDate="2015-07-06T20:15:47.333" Score="9" ViewCount="2050" Body="&lt;p&gt;Wireless network icon suddenly missing from wingpanel. Cannot find option in &lt;code&gt;dconf-editor&lt;/code&gt; to enable network icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but there was no change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the network icon back in wingpanel?&lt;/p&gt;&#xA;" OwnerUserId="288" LastEditorDisplayName="user3" LastEditDate="2015-07-06T20:46:02.747" LastActivityDate="2016-01-09T16:16:42.483" Title="Network icon gone missing in wingpanel" Tags="|wingpanel|luna|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="289" PostTypeId="1" CreationDate="2015-07-07T00:53:10.507" Score="6" ViewCount="1335" Body="&lt;p&gt;I'm running Freya on a MacBook Pro 2013 edition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suspend doesn't ever work as planned. It takes quite a while to actually get to sleep and it'll often wake itself back up again, and when it does, it seems to have taken out the entire networking stack and neither my USB 3 Ethernet adapter nor my wireless USB dongle work any more.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The main problem is that it always suspends when the lid is closed, which I want to never happen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fully prevent it from &lt;em&gt;ever&lt;/em&gt; suspending? I'm using it with 2 DisplayPort monitors right now, but I can't close the lid for fear that it'll suspend itself and screw everything up.&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2015-07-08T17:30:37.027" LastActivityDate="2015-08-17T13:59:28.173" Title="Prevent suspend no matter what?" Tags="|release-freya|macintosh|power|suspend|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="290" PostTypeId="1" AcceptedAnswerId="303" CreationDate="2015-07-07T01:36:23.077" Score="10" ViewCount="965" Body="&lt;p&gt;I installed Spotify using the &lt;a href=&quot;https://www.spotify.com/us/download/linux/&quot; rel=&quot;noreferrer&quot;&gt;official repository&lt;/a&gt; but the icon does not appear in Wingpanel. Someone with the same issue?&lt;/p&gt;&#xA;" OwnerUserId="28" LastEditorUserId="68" LastEditDate="2015-07-07T18:49:55.163" LastActivityDate="2015-07-07T18:49:55.163" Title="How can I integrate Spotify client with Wingpanel?" Tags="|applications|wingpanel|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="291" PostTypeId="1" AcceptedAnswerId="300" CreationDate="2015-07-07T04:59:31.337" Score="10" ViewCount="1162" Body="&lt;p&gt;Plank can be moved around with elementary Tweaks, so I was wondering, can Wingpanel also be moved?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-07T17:56:49.347" Title="Can I put Wingpanel at the bottom of the screen?" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="292" PostTypeId="5" CreationDate="2015-07-07T05:05:47.733" Score="0" Body="&lt;p&gt;The operating system on which elementary is based.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu specific questions should be asked on &lt;a href=&quot;http://askubuntu.com&quot;&gt;Ask Ubuntu&lt;/a&gt;. This tag can be used for questions that cover &lt;em&gt;both&lt;/em&gt; elementary and Ubuntu, but are more specifically about elementary and/or its components.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu uses the Unity Desktop Environment, whereas elementary uses its own Pantheon Desktop Environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more info see &lt;a href=&quot;https://ubuntu.com&quot; rel=&quot;nofollow&quot;&gt;The Ubuntu Homepage&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2015-07-20T22:22:31.890" LastActivityDate="2015-07-20T22:22:31.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="293" PostTypeId="4" CreationDate="2015-07-07T05:05:47.733" Score="0" Body="Questions with this tag should be about both elementary OS and Ubuntu - a Linux distribution with an emphasis on ease of use and installation. Note that http://askubuntu.com is specifically dedicated to Ubuntu questions. elementary OS releases are based on Ubuntu LTS releases normally." LastEditorUserId="26" LastEditDate="2015-07-20T22:19:14.650" LastActivityDate="2015-07-20T22:19:14.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="294" PostTypeId="1" AcceptedAnswerId="299" CreationDate="2015-07-07T05:17:10.963" Score="6" ViewCount="162" Body="&lt;p&gt;Shutter is nice, but it's not an elementary-styled app, and it's a bit hefty at times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there an alternative for quick screen-shots?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-07T10:00:46.593" Title="Is there an elementary HIG-compliant screenshot app?" Tags="|applications|screenshot|software-recommendation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="295" PostTypeId="2" ParentId="262" CreationDate="2015-07-07T05:25:41.717" Score="1" Body="&lt;p&gt;Open Synaptic and go to Settings&gt;Preferences, then check &quot;Show package properties in the main window&quot;:&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/tFUGe.png&quot; alt=&quot;SPP&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, find the package that is broken, and under its properties, click dependencies. In the list you will see a package that is in italics.&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/7h6FR.png&quot; alt=&quot;Package Properties&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no broken packages so mine are not in italics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you've identified this package, you'll need to install it manually. It seems to be winbind in your case. It probably cannot be installed automatically because it depends on something else, which Synaptic cannot mark for installation for some reason.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="154" LastEditDate="2015-07-07T13:52:23.623" LastActivityDate="2015-07-07T13:52:23.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="297" PostTypeId="1" AcceptedAnswerId="298" CreationDate="2015-07-07T07:55:01.100" Score="10" ViewCount="5104" Body="&lt;p&gt;I cannot play H.265/HEVC videos. While trying to play video I get an error &quot;Audience needs video/x-unknown decoder to play this file&quot;. Here's a screenshot of an error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Tz0X.png&quot; alt=&quot;error image&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I click on install video decoder, again it gives me an error &quot;plugin not found&quot;. How can solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-07-11T13:31:01.217" LastActivityDate="2016-04-11T17:50:39.970" Title="How to play H.265/HEVC videos?" Tags="|codec|video-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="298" PostTypeId="2" ParentId="297" CreationDate="2015-07-07T07:55:01.100" Score="8" Body="&lt;p&gt;There is a PPA for libde265 GStreamer integration.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:strukturag/libde265&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;New install the plugin:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gstreamer0.10-libde265 gstreamer1.0-libde265&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After installation of the plugin, all players using the GStreamer framework (this includes the default player “Videos”) will be able to playback HEVC/H.265 content.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a VLC plugin available:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:strukturag/libde265&#xA;sudo apt-get install vlc-plugin-libde265&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://www.libde265.org/blog/2014/02/22/gstreamer-4k-h265-hevc-plugin/&quot; rel=&quot;nofollow&quot;&gt;GStreamer plugin for 4K H.265/HEVC video streaming&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="4392" LastEditDate="2016-04-11T17:50:39.970" LastActivityDate="2016-04-11T17:50:39.970" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="299" PostTypeId="2" ParentId="294" CreationDate="2015-07-07T08:43:03.950" Score="8" Body="&lt;p&gt;The default one is gnome-screenshot and as far as I can tell it respects the HIG guidelines (see window decorations).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/w79hv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking through 3rd-party solutions specifically developed for elementary OS, there's &lt;a href=&quot;http://quassy.github.io/elementary-apps/Screenshot/&quot; rel=&quot;noreferrer&quot;&gt;a similar tool&lt;/a&gt; which makes use of a dark theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/E3ICP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1415120&quot; rel=&quot;noreferrer&quot;&gt;request&lt;/a&gt; to pull it in as the new default screenshot tool in the next release of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-07-07T08:49:53.163" LastActivityDate="2015-07-07T08:49:53.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="300" PostTypeId="2" ParentId="291" CreationDate="2015-07-07T09:01:30.120" Score="7" Body="&lt;p&gt;No, it is not possible at the moment and there are currently no plans to add this feature.&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="45" LastEditDate="2015-07-07T17:56:49.347" LastActivityDate="2015-07-07T17:56:49.347" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="302" PostTypeId="1" AcceptedAnswerId="305" CreationDate="2015-07-07T14:11:32.897" Score="5" ViewCount="1411" Body="&lt;p&gt;I have copied a few new albums (MP3, properly id3-tagged) into my local music folder, unfortunately they don't show up in Noise.&lt;br&gt;&#xA;Restarting Noise didn't help either, even restarting elementary OS had no effect. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I enforce a rescan of my music library in Noise?&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-07-08T10:22:05.467" Title="How do I force Noise to rescan my music library?" Tags="|music|import|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="303" PostTypeId="2" ParentId="290" CreationDate="2015-07-07T15:08:04.733" Score="6" Body="&lt;p&gt;Spotify client is a QT-based application which relies on &lt;code&gt;sni-qt&lt;/code&gt; to display it's indicator icon. Maybe somehow &lt;code&gt;sni-qt&lt;/code&gt; got removed by uninstalling another application on your machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check if &lt;code&gt;sni-qt&lt;/code&gt; is installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | grep sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case it's not, reinstall it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-07-07T17:34:12.263" LastActivityDate="2015-07-07T17:34:12.263" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="304" PostTypeId="2" ParentId="302" CreationDate="2015-07-07T15:11:54.817" Score="5" Body="&lt;p&gt;Open Music, and click Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KVEGd.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then change the location to Desktop, then back to Music.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-07T15:11:54.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="305" PostTypeId="2" ParentId="302" CreationDate="2015-07-07T16:56:29.510" Score="10" Body="&lt;p&gt;Run this command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/.local/share/noise/*.db&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then &lt;a href=&quot;https://elementaryos.stackexchange.com/a/304/3&quot;&gt;re-scan your music library&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="211" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-08T10:22:05.467" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="306" PostTypeId="2" ParentId="278" CreationDate="2015-07-07T19:37:35.013" Score="4" Body="&lt;p&gt;Finally I found my answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First I installed Freya in Legacy Mode, after that I converted it to UEFI using &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;boot repair&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation, I switched bios configuration to UEFI and boot in UEFI mode using Ubuntu Live (or other live media) and I do these steps:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;In Ubuntu first thing we need to do is remove &lt;code&gt;bios_grub&lt;/code&gt; partition using GParted (Just find &lt;code&gt;bios_grub&lt;/code&gt; in Flags column in GParted and delete it).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then type the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA; sudo apt-get update&#xA; sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will automatically scan systems and detect EFI.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After scanning finishes, you will see this dialog box.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5mmPO.png&quot; alt=&quot;Boot Repair&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Just press &lt;strong&gt;Recommended Repair&lt;/strong&gt;, it will apply changes (while boot repair is working, it will ask you to run some commands in Terminal). &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now boot the successfully repaired system and enjoy elementary OS on UEFI.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="47" LastEditorUserId="3757" LastEditDate="2016-04-04T08:36:12.890" LastActivityDate="2016-04-04T08:36:12.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="307" PostTypeId="1" AcceptedAnswerId="318" CreationDate="2015-07-07T20:24:11.433" Score="1" ViewCount="104" Body="&lt;p&gt;Which style of naming files and folders is the most compatible within the Linux ecosystem and thus recommended to be consistently applied?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="45" LastEditDate="2015-09-01T17:31:55.007" LastActivityDate="2015-09-01T17:31:55.007" Title="What is the most compatible style to name files and folders?" Tags="|folder|filesystem|" AnswerCount="1" CommentCount="2" ClosedDate="2015-07-08T03:20:04.167" ContentLicense="CC BY-SA 3.0" />
  <row Id="309" PostTypeId="1" CreationDate="2015-07-07T21:34:03.857" Score="3" ViewCount="743" Body="&lt;p&gt;I installed elementary OS Freya yesterday - replacing Ubuntu. When I boot instead of just elementary OS the PC sends me to a grub page where I have to choose between running elementary OS or &quot;Advanced Options for elementary OS&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make the PC boot and run elementary OS Freya normally?&lt;/p&gt;&#xA;" OwnerUserId="304" LastEditorUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-08-05T21:59:32.423" LastActivityDate="2015-08-05T21:59:32.423" Title="How do I make elementary OS Freya not lead me to the Grub on boot?" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="310" PostTypeId="2" ParentId="309" CreationDate="2015-07-07T22:14:02.243" Score="4" Body="&lt;p&gt;Change the grub boot time out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, open a terminal and run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will see something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=10&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change the &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; number 10 (it was line 9 for me) to any number of seconds (on my main computer I have it set to 2 seconds).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd advise against 0 seconds, because if you ever &lt;em&gt;need&lt;/em&gt; to access grub, you will struggle - 2 is a good amount to chose.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-07T22:14:02.243" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="311" PostTypeId="1" AcceptedAnswerId="317" CreationDate="2015-07-07T22:22:15.273" Score="8" ViewCount="4731" Body="&lt;p&gt;I see on &lt;a href=&quot;https://launchpad.net/elementaryos/0.4-loki&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad that there is release 0.4 Loki&lt;/a&gt;. Is this available for download?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, is it the same installation (i.e. with an ISO) or is it a more technical process?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="308" LastEditDate="2019-12-06T06:59:50.427" LastActivityDate="2019-12-06T06:59:50.427" Title="Can I install elementary OS 0.4 Loki?" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="314" PostTypeId="1" AcceptedAnswerId="2053" CreationDate="2015-07-07T23:36:41.213" Score="6" ViewCount="4387" Body="&lt;p&gt;I just want to split apps to divide the screen in two or three like the image below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kflNP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="298" LastEditorUserId="190" LastEditDate="2015-07-08T00:49:54.183" LastActivityDate="2015-09-20T06:06:44.943" Title="Split application windows to fit the screen" Tags="|window-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="315" PostTypeId="2" ParentId="314" CreationDate="2015-07-07T23:45:49.093" Score="6" Body="&lt;p&gt;If you drag the windows to either corner of the screen, they will snap into place. To snap them back to their original size just click and drag away from the side of the screen again.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-07T23:45:49.093" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="317" PostTypeId="2" ParentId="311" CreationDate="2015-07-08T00:16:21.253" Score="16" Body="&lt;p&gt;Yes, elementary OS Loki has been released. For the latest version of elementary OS, you can always visit &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="308" LastEditDate="2019-12-06T06:58:15.573" LastActivityDate="2019-12-06T06:58:15.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="318" PostTypeId="2" ParentId="307" CreationDate="2015-07-08T00:38:20.707" Score="10" Body="&lt;p&gt;The one absolute rule is that you can't use a slash &lt;code&gt;/&lt;/code&gt; in a file name. That's the directory separator and it can't be escaped. Apart from that, any character is allowed on Linux (except when accessing media or network resources shared with other filesystems), but a number of characters can cause trouble.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Don't start a file name with &lt;code&gt;-&lt;/code&gt; (dash/hyphen). Commands may interpret it as an option.&lt;/li&gt;&#xA;&lt;li&gt;Don't use an initial &lt;code&gt;~&lt;/code&gt; (tilde) because that means “home directory” in many applications.&lt;/li&gt;&#xA;&lt;li&gt;If you're going to exchange files with Windows users, or to put files on removable media, avoid characters that Windows doesn't support: &lt;code&gt;\/?:*&quot;&amp;gt;&amp;lt;|&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Don't use nonprintable characters (e.g. control characters), tabs or newlines. You won't even be able to type them in many interfaces.&lt;/li&gt;&#xA;&lt;li&gt;Some badly written shell scripts may choke on spaces as well as &lt;code&gt;\*?[]&lt;/code&gt; because they're &lt;a href=&quot;https://en.wikipedia.org/wiki/Wildcard_character#File_and_directory_patterns&quot;&gt;wildcards&lt;/a&gt;. In addition, some applications that can act on multiple files at once interpret these characters as wildcards.&lt;/li&gt;&#xA;&lt;li&gt;If you're going to exchange files with older computers or with people who speak a different language, especially one written in a non-Latin alphabet, they may use a different character encoding. The &lt;a href=&quot;https://en.wikipedia.org/wiki/ASCII&quot;&gt;ASCII&lt;/a&gt; characters are guaranteed to be available everywhere and encoded in the same way.&lt;/li&gt;&#xA;&lt;li&gt;Many applications use the &lt;a href=&quot;https://en.wikipedia.org/wiki/Filename_extension&quot;&gt;file extension&lt;/a&gt;, to figure out what files they support and how they open it. The system also uses the extension to determine what application to open the file with. So leave extensions in place. The extension is the part after the last dot, e.g. &lt;code&gt;txt&lt;/code&gt; in &lt;code&gt;myfile.txt&lt;/code&gt;; sometimes there are multiple extensions, e.g. &lt;code&gt;myfile.txt.gz&lt;/code&gt; for a compressed (&lt;code&gt;.gz&lt;/code&gt;) text (&lt;code&gt;.txt&lt;/code&gt;) file.&lt;/li&gt;&#xA;&lt;li&gt;File names beginning with &lt;code&gt;.&lt;/code&gt; are &lt;a href=&quot;http://en.wikipedia.org/wiki/Hidden_file_and_hidden_directory#Unix_and_Unix-like_environments&quot;&gt;hidden by default&lt;/a&gt; in Files, in the output of the &lt;code&gt;ls&lt;/code&gt; command and in many other file browsers.&lt;/li&gt;&#xA;&lt;li&gt;Linux is case-sensitive: &lt;code&gt;myfile&lt;/code&gt; is not related to &lt;code&gt;Myfile&lt;/code&gt;. Traditionally file names are in lowercase, largely because that makes them easier to type. In the old days, systems usually sorted uppercase letters before lowercase letters, so there's a tradition of starting a file name with a capital letter to make it come first in directory listings, but modern systems often sort names case-insensitively. Sticking to lowercase avoids confusion and is easier to type.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If you'd rather not remember all these complex cases, here are just two simple rules:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Maximum safety: stick to letters &lt;code&gt;a&lt;/code&gt;–&lt;code&gt;z&lt;/code&gt; and digits &lt;code&gt;0&lt;/code&gt;–&lt;code&gt;9&lt;/code&gt;, plus &lt;code&gt;-&lt;/code&gt; to separate words, and &lt;code&gt;.extension&lt;/code&gt; at the end of the file name. For example: &lt;code&gt;my-file.txt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;More readable: use letters and digits in English or in your own script, plus space or &lt;code&gt;-&lt;/code&gt; to separate words, and &lt;code&gt;.extension&lt;/code&gt; at the end of the file name. For example: &lt;code&gt;Jörgs Datei.txt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Final tip: use the YYYYMMDD format (year-month-day, with 4 digits for the year and a leading zero in the month and day number) for dates, e.g. &lt;code&gt;20150622-report.txt&lt;/code&gt;. That way, sorting the file name gives you chronological order.&lt;/p&gt;&#xA;" OwnerUserId="190" LastEditorUserId="190" LastEditDate="2015-07-08T12:53:34.110" LastActivityDate="2015-07-08T12:53:34.110" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="319" PostTypeId="2" ParentId="289" CreationDate="2015-07-08T07:36:29.100" Score="1" Body="&lt;p&gt;You could install Caffeine from &lt;code&gt;ppa:caffeine-developers/ppa&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It runs as an indicator and can be used to prevent suspension.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try this method, &lt;a href=&quot;https://askubuntu.com/a/568440/1992&quot;&gt;taken&lt;/a&gt; from &lt;a href=&quot;http://askubuntu.com&quot;&gt;Ask Ubuntu&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;For me it is important to just disable the &quot;automatic Suspend&quot; Because&#xA;  I still want to be able to do the &quot;manual Suspend&quot; in&#xA;  &lt;code&gt;/etc/polkit-1/localauthority/50-local.d/com.ubuntu.disable-suspend.pkla&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;So, I used:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Disable suspend (upower)]&#xA;Identity=unix-user:*&#xA;Action=org.freedesktop.upower.suspend&#xA;ResultActive=no&#xA;ResultInactive=no&#xA;ResultAny=no&#xA;&#xA;[Disable suspend (logind)]&#xA;Identity=unix-user:*&#xA;Action=org.freedesktop.login1.suspend&#xA;ResultActive=yes&#xA;ResultInactive=no&#xA;ResultAny=yes&#xA;&#xA;[Disable suspend when others are logged in (logind)]&#xA;Identity=unix-user:*&#xA;Action=org.freedesktop.login1.suspend-multiple-sessions&#xA;ResultActive=yes&#xA;ResultInactive=no&#xA;ResultAny=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Now I can click &quot;Suspend&quot; in the logoff menu. But the PC keeps running&#xA;  unless I send it to &quot;Suspend&quot;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-08T07:36:29.100" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="320" PostTypeId="1" CreationDate="2015-07-08T10:33:38.373" Score="3" ViewCount="584" Body="&lt;p&gt;The Driver for the printer has been installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However the printer does not respond to print requests. It only displays a message that the page has been printed. It works fine with other operating systems&lt;/p&gt;&#xA;" OwnerUserId="306" LastEditorDisplayName="user3" LastEditDate="2015-07-08T11:26:12.193" LastActivityDate="2015-07-22T06:12:27.473" Title="Canon LBP2900B is not working with elementary OS Freya" Tags="|printer|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="321" PostTypeId="1" AcceptedAnswerId="323" CreationDate="2015-07-08T13:10:20.347" Score="7" ViewCount="4329" Body="&lt;p&gt;I know there are some files in my Home folder that start with a &lt;code&gt;.&lt;/code&gt; (full stop).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I view them in Files? (I know I can use &lt;code&gt;ls -a&lt;/code&gt; on the command line.)&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:25:51.237" LastActivityDate="2020-09-05T12:01:09.083" Title="How can I view hidden files?" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="322" PostTypeId="2" ParentId="321" CreationDate="2015-07-08T13:10:20.347" Score="4" Body="&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;H&lt;/kbd&gt; to view them. This is a temporary setting sometimes, and you can press it again to hide them.&lt;/p&gt;&#xA;&lt;p&gt;There is also a right click option, which has the same effect as &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If the setting isn't persistent, you can use this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.files.preferences show-hiddenfiles true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and to hide again use this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.files.preferences show-hiddenfiles false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2020-09-05T12:01:09.083" LastActivityDate="2020-09-05T12:01:09.083" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="323" PostTypeId="2" ParentId="321" CreationDate="2015-07-08T14:31:38.537" Score="16" Body="&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;H&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;right-click context menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Nk7oX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-07-08T15:56:53.207" LastActivityDate="2015-07-08T15:56:53.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="324" PostTypeId="1" AcceptedAnswerId="327" CreationDate="2015-07-08T16:08:22.170" Score="2" ViewCount="1343" Body="&lt;p&gt;On my laptop the terminal font color is too dark. I need more contrast with the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I achieve this?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-05-07T03:57:18.757" LastActivityDate="2016-05-07T03:57:18.757" Title="How do I make the terminal font a little brighter?" Tags="|release-freya|fonts|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="325" PostTypeId="1" AcceptedAnswerId="326" CreationDate="2015-07-08T16:52:32.190" Score="5" ViewCount="7113" Body="&lt;p&gt;I want to easily enable/disable laptop touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that could be done by short-keys, but at some point I had the impression that custom shortcuts do not work very well in Freya (Settings-Keyboard-Shortcuts-Custom). That was in beta I think. Now it seems they work ok, just that you need to log out and back in.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-07-08T17:05:57.460" LastActivityDate="2021-04-02T20:48:45.367" Title="How to easily enable and disable touchpad without using the mouse?" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="326" PostTypeId="2" ParentId="325" CreationDate="2015-07-08T16:55:19.920" Score="10" Body="&lt;p&gt;An alternative solution to shortcuts would be to create &lt;code&gt;.desktop&lt;/code&gt; files with the same commands. Then, they can be put in &lt;code&gt;usr/share/applications&lt;/code&gt; and accessed like other Applications with Super-Space etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, what commands to use?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and note the &lt;code&gt;id=&lt;/code&gt; for Touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let's say that is 15.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command to disable touchpad is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; xinput set-prop 15 &quot;Device Enabled&quot; 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to enable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; xinput set-prop 15 &quot;Device Enabled&quot; 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(&lt;strong&gt;Replace 15 with the output of &quot;xinput list&quot;&lt;/strong&gt;. Then, these two commands can be added to Settings-Keyboard-Shortcuts-Custom and used with shortcuts.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, to create the .desktop files&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I have Gedit as text editor here):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/disable_touchpad.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With the lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Disable touchpad&#xA;Comment=Set your touchpad preferences&#xA;Exec= xinput set-prop 15 &quot;Device Enabled&quot; 0&#xA;Icon=/usr/share/icons/HighContrast/256x256/status/touchpad-disabled.png&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-GNOME-Settings-Panel;System;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/enable_touchpad.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With the lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Enable touchpad&#xA;Comment=Set your mouse and touchpad preferences&#xA;Exec= xinput set-prop 15 &quot;Device Enabled&quot; 1&#xA;Icon=/usr/share/icons/HighContrast/256x256/devices/input-touchpad.png&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-GNOME-Settings-Panel;System;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, just use the Super-Space launcher and type the first letters of 'touchpad', 'enable' or 'disable'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TI2Jc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-07-08T17:07:29.597" LastActivityDate="2015-07-08T17:07:29.597" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="327" PostTypeId="2" ParentId="324" CreationDate="2015-07-08T17:01:56.327" Score="5" Body="&lt;p&gt;If you want to change the font color, you can use &lt;a href=&quot;https://launchpad.net/configurator&quot; rel=&quot;nofollow&quot;&gt;Configurator&lt;/a&gt;. Once you've installed the application, you go to &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt; and change the value of &lt;code&gt;foreground&lt;/code&gt; to any color you want. The default color in my system is &lt;code&gt;#94a3a5&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want to use Configurator(or dconf-editor) you an use terminal and paste this &#xA;&lt;code&gt;gsettings set org.pantheon.terminal.settings foreground '#000'&lt;/code&gt; and change &lt;code&gt;#000&lt;/code&gt; with the color you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To restore the default color settings , paste this on your terminal &#xA;&lt;code&gt;gsettings set org.pantheon.terminal.settings foreground '#94a3a5'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2015-07-08T17:01:56.327" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="328" PostTypeId="1" AcceptedAnswerId="329" CreationDate="2015-07-08T17:19:49.257" Score="5" ViewCount="5763" Body="&lt;p&gt;Let's say I want to create a .desktop file in &lt;code&gt;/usr/share/applications&lt;/code&gt; and I do something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i gedit /usr/share/applications/cipricus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will open that file in gedit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try to use the default text editor Scratch, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /usr/share/applications/cipricus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that will just open Scratch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that file already exists, Scratch will open it just like Gedit does. But it doesn't seem able to create files. I have also tried without the need of administrator privileges.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-09-01T17:31:23.927" LastActivityDate="2015-09-01T17:31:23.927" Title="Why can I not use Scratch text editor to create files from the Terminal?" Tags="|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="329" PostTypeId="2" ParentId="328" CreationDate="2015-07-08T17:45:56.793" Score="4" Body="&lt;p&gt;I don't think it's possible, if you do open scratch text editor in the debug mode using &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;scratch-text-editor test.py -d&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;if the file does not exists, you will see someting like this in the terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_WARN 11:26:52.180479] Scratch.vala:236: Error when getting&#xA;information for file '/hello': No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which means that the file/folder does not exists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think you should report this on &lt;a href=&quot;https://bugs.launchpad.net/scratch&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ps: you can have the list of possible options in terminal using &lt;code&gt;scratch-text-editor --help-all&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorDisplayName="user3" LastEditDate="2015-07-09T10:28:33.447" LastActivityDate="2015-07-09T10:28:33.447" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="330" PostTypeId="1" AcceptedAnswerId="332" CreationDate="2015-07-08T17:59:35.253" Score="7" ViewCount="13261" Body="&lt;p&gt;What is the command to restart Plank dock in case that is needed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have killed it with &lt;code&gt;killall plank&lt;/code&gt; but now I cannot start it without logging out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doing &lt;code&gt;plank&lt;/code&gt; in Terminal keeps it open only until the Terminal is closed.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2015-07-08T18:29:46.047" Title="A command to properly restart Plank?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="331" PostTypeId="2" ParentId="330" CreationDate="2015-07-08T18:23:52.210" Score="9" Body="&lt;p&gt;The dock &lt;em&gt;should&lt;/em&gt; restart itself automatically. However, if you need to manually run it from the Terminal and want it to continue running in the background, use the command &lt;code&gt;plank &amp;amp;&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;&amp;amp;&lt;/code&gt; tells the Terminal to run the &lt;code&gt;plank&lt;/code&gt; command in the background, allowing you to close the Terminal without killing the dock.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2015-07-08T18:23:52.210" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="332" PostTypeId="2" ParentId="330" CreationDate="2015-07-08T18:29:46.047" Score="8" Body="&lt;p&gt;I don't know why, but &lt;code&gt;plank &amp;amp;&lt;/code&gt; does not work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I find effective is &lt;code&gt;nohup plank &amp;amp;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://linux.die.net/man/1/nohup&quot; rel=&quot;noreferrer&quot;&gt;Documentation on nohup&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-07-08T18:29:46.047" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="333" PostTypeId="1" AcceptedAnswerId="339" CreationDate="2015-07-08T18:37:10.393" Score="10" ViewCount="3733" Body="&lt;p&gt;When I try to run a python application which uses a pyplot-window, I get a warning in the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I fix it, and what causes it?&lt;/p&gt;&#xA;" OwnerUserId="310" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T06:07:33.077" LastActivityDate="2016-04-24T06:08:50.193" Title="GTK-error while running a pyplot-application" Tags="|pantheon-files|programming|gtk|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="334" PostTypeId="1" AcceptedAnswerId="336" CreationDate="2015-07-08T18:39:53.707" Score="5" ViewCount="3599" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ACR7x.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing in this way with &lt;code&gt;apturl&lt;/code&gt; what I get is VLC. 2.1.6&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/aFYiw.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this is maybe a larger Ubuntu issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know a PPA that can work (&lt;code&gt;sudo add-apt-repository ppa:mc3man/trusty-media&lt;/code&gt;) - from &lt;a href=&quot;https://askubuntu.com/a/565759/47206&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-04-25T01:50:59.027" Title="Is VLC 2.2 available for elementary OS Freya?" Tags="|release-freya|vlc|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="336" PostTypeId="2" ParentId="334" CreationDate="2015-07-08T18:46:24.480" Score="3" Body="&lt;p&gt;elementary OS Freya (0.3) is based on Ubuntu Trusty (14.04) and the latest available version of VLC for this version of Ubuntu is 2.1.x (so 2.1.6). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This PPA  provides the latest version though (at least for the moment):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mc3man/trusty-media &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To have the &lt;code&gt;.deb&lt;/code&gt; file, look on &lt;a href=&quot;https://packages.debian.org/search?arch=amd64&amp;amp;keywords=vlc&quot; rel=&quot;nofollow&quot;&gt;packages.debian.org&lt;/a&gt; or &lt;a href=&quot;http://pkgs.org/download/vlc&quot; rel=&quot;nofollow&quot;&gt;http://pkgs.org&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorUserId="3757" LastEditDate="2016-04-25T01:50:59.027" LastActivityDate="2016-04-25T01:50:59.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="339" PostTypeId="2" ParentId="333" CreationDate="2015-07-08T19:28:32.403" Score="7" Body="&lt;p&gt;Pantheon Files (the default file manager) contains a custom GTK+ module called &lt;code&gt;pantheon-filechooser-module&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's shipped on up-to-date systems, but it's not activated yet (currently, the default GTK+ file chooser dialog is still in use). That's most likely the reason it fails to load. Additionally, it &lt;em&gt;might&lt;/em&gt; fail because it is a GTK+2 application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other hand, it might be possible you removed Pantheon files. If that's the case, it might be the (other) reason the module fails to load, because it's not installed on your system.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-04-24T06:08:50.193" LastActivityDate="2016-04-24T06:08:50.193" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="340" PostTypeId="1" AcceptedAnswerId="341" CreationDate="2015-07-08T21:33:35.213" Score="1" ViewCount="257" Body="&lt;p&gt;When I click Multitasking View I get this icon at the bottom:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4W592.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I set them up to appear bigger, something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5SjYG.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So that I can see exactly what there is?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This becomes a bigger problem when I have 5+ apps open. Can I change it?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-08T22:16:22.333" LastActivityDate="2015-07-09T10:15:13.507" Title="Can I change the Multitasking view icon style?" Tags="|design|multitasking-view|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="341" PostTypeId="2" ParentId="340" CreationDate="2015-07-08T22:05:09.577" Score="3" Body="&lt;p&gt;Well, currently you cannot change these icons' size - they are adjusted automatically. However, if you're interested in this feature, you might consider to open a bug report on launchpad. The Multitasking View is part of &lt;a href=&quot;https://launchpad.net/gala&quot; rel=&quot;nofollow&quot;&gt;Gala&lt;/a&gt;, the window manager used by elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorDisplayName="user3" LastEditDate="2015-07-09T10:15:13.507" LastActivityDate="2015-07-09T10:15:13.507" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="342" PostTypeId="1" AcceptedAnswerId="344" CreationDate="2015-07-08T23:32:40.597" Score="23" ViewCount="5211" Body="&lt;p&gt;I don't like the behaviour of the &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt; shortcut, when changing between windows, how can I change to something like OS X where you see a line of icons rather than changing windows?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JNkLo.jpg&quot; alt=&quot;Alt + Tab on OSX&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="3757" LastEditorDisplayName="user3" LastEditDate="2016-05-07T04:27:21.123" LastActivityDate="2022-01-12T10:34:09.253" Title="How to change alt+tab behavior" Tags="|gala|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="343" PostTypeId="2" ParentId="184" CreationDate="2015-07-09T00:06:19.403" Score="6" Body="&lt;p&gt;In System Settings &gt; About There is a button &quot;Restore Default Settings&quot;. You can use this to reset all system settings back to their factory defaults.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will not affect any application settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tn6Ps.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tn6Ps.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-27T19:01:12.737" LastActivityDate="2015-09-27T19:01:12.737" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="344" PostTypeId="2" ParentId="342" CreationDate="2015-07-09T09:33:58.277" Score="12" Body="&lt;p&gt;It's &lt;em&gt;theoretically&lt;/em&gt; possible to change this; Gala (the elementary OS window manager) can be extended by plugins. There even &lt;em&gt;is&lt;/em&gt; a plugin changing the &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; behaviour called &lt;a href=&quot;https://github.com/tom95/gala-alternate-alt-tab&quot;&gt;gala-alternative-alt-tab&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can take a look at Tom's (the developer) &lt;a href=&quot;https://docs.google.com/document/d/1kLVnfWb0o0ay3J1s2VuVoJGvxfL_ZlNk0nQzyOO1AcA/edit#heading=h.2g4v3lnnhdue&quot;&gt;document&lt;/a&gt;, which describes the plugins future features and functionality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;However&lt;/strong&gt;, as the GitHub page points out, this is &lt;a href=&quot;https://en.wikipedia.org/wiki/Software_release_life_cycle#Alpha&quot;&gt;alpha&lt;/a&gt; software, so there is no package available via repositories and as the last commit was in April, it may not even work at all. Tom has been very busy the past months and this plugin isn't his top priority. So take this information with a grain of salt - It is &lt;strong&gt;not&lt;/strong&gt; recommended to install it on your system.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="22" LastEditDate="2015-07-09T09:40:10.623" LastActivityDate="2015-07-09T09:40:10.623" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="346" PostTypeId="2" ParentId="9" CreationDate="2015-07-09T10:11:21.927" Score="11" Body="&lt;p&gt;This is just to show how easy is to make programs accessible without clogging your desktop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Slingshot (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;Space&lt;/kbd&gt;):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/EnGDJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Synapse (&lt;kbd&gt;Ctrl&lt;/kbd&gt;-&lt;kbd&gt;Space&lt;/kbd&gt;, customizable):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/53b6V.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pin programs to the Dock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/HvDxx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not to have an empty desktop, put a &lt;a href=&quot;https://www.google.fr/search?q=conky%20on%20elementary&amp;amp;client=ubuntu&amp;amp;hs=iRV&amp;amp;channel=fs&amp;amp;source=lnms&amp;amp;tbm=isch&amp;amp;sa=X&amp;amp;ei=4keeVdmgDor8UMT6g5gL&amp;amp;ved=0CAcQ_AUoAQ&amp;amp;biw=1600&amp;amp;bih=708&quot; rel=&quot;noreferrer&quot;&gt;conky&lt;/a&gt; on it.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-07-10T14:28:18.867" LastActivityDate="2015-07-10T14:28:18.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="347" PostTypeId="2" ParentId="328" CreationDate="2015-07-09T10:37:10.657" Score="5" Body="&lt;p&gt;You can set up an alias to create the file if it doesn't exist. First, create the bash file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;touch .bash_aliases&#xA;scratch-text-editor .bash_aliases&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then add the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch() {&#xA;    touch $1&#xA;    scratch-text-editor $1&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the command &lt;code&gt;scratch&lt;/code&gt; to make the file (with &lt;code&gt;touch&lt;/code&gt;) and then edit it with &lt;code&gt;scratch-text-editor&lt;/code&gt;. &lt;code&gt;$1&lt;/code&gt; means the first argument given.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This solves the other issue of the command for scratch being annoyingly long. Anyway, restart your terminal, and check the top. If you see an error like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: /home/tim/.bash_aliases: line 2: unexpected EOF...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or any error about the file, then check you've entered it all correctly.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-09T10:37:10.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="349" PostTypeId="1" AcceptedAnswerId="354" CreationDate="2015-07-09T11:17:21.277" Score="2" ViewCount="337" Body="&lt;p&gt;Can I add more columns to the ones I see?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/VUxeL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="26" LastEditorDisplayName="user3" LastEditDate="2015-09-03T10:31:48.910" LastActivityDate="2015-09-03T10:31:48.910" Title="Can File Manager columns be added/edited?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="350" PostTypeId="1" AcceptedAnswerId="351" CreationDate="2015-07-09T11:27:03.507" Score="4" ViewCount="5177" Body="&lt;p&gt;If I go to Settings, Applications, Startup, all I see is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zG6Wb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember I had added a few startup scripts (conky etc) and applications (xbindkeys) but I cannot see them there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think they were added with a different tool or something.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-01-27T15:26:29.847" Title="How to edit startup applications?" Tags="|startup|settings|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="351" PostTypeId="2" ParentId="350" CreationDate="2015-07-09T11:41:21.237" Score="6" Body="&lt;h2&gt;In Freya&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The tool I used is &lt;code&gt;gnome-session-properties&lt;/code&gt; (of the &lt;code&gt;gnome-session-bin&lt;/code&gt; package, installed by default)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To launch it I had created a desktop file like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/startup.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=StartupApps&#xA;Comment=View apps starting with the system&#xA;GenericName=Startup Applications&#xA;Icon=preferences-system&#xA;Terminal=false&#xA;Categories=Gnome;Gtk;System;&#xA;Exec=gnome-session-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It shows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/wnOJC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has edit option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it seems that for security reasons in Freya stable the default startup options which were accessible in Freya beta with this tool (see &lt;a href=&quot;https://i.stack.imgur.com/qXkjl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, from &lt;a href=&quot;https://unix.stackexchange.com/a/184752/32012&quot;&gt;this older answer&lt;/a&gt; (that I had forgotten about!)) are now hidden, and only the new custom options are visible.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;In Loki&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In Loki ' Settings, Applications, Startup' shows the same items as  &lt;code&gt;gnome-session-properties&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KCoxo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KCoxo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the latter still has the advantage of providing an option to edit the entries (in the former one has to remove and add again an entry in order to modify it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A cool feature in both  tools is &lt;strong&gt;the possibility to use drag&amp;amp;drop of application launcher files&lt;/strong&gt; (the kind of &lt;code&gt;.desktop&lt;/code&gt; files found in the &lt;code&gt;applications&lt;/code&gt; folders) onto the window in order to add new startup items. Only such files can be added in this way, not scripts; in order to add scripts, you have to use the 'Add' option.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-01-27T15:26:29.847" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="352" PostTypeId="2" ParentId="262" CreationDate="2015-07-09T12:49:59.640" Score="1" Body="&lt;p&gt;The main idea is to use &lt;code&gt;aptitude&lt;/code&gt; and its larger options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer follows &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2188107&amp;amp;page=2&quot; rel=&quot;nofollow&quot;&gt;this one on ubuntuforums&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Made &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; support multiarch by adding [arch=amd64,i386] to the deb-line:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deb [arch=amd64,i386] http://fr.archive.ubuntu.com/ubuntu/ trusty universe&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa&#xA;sudo dpkg --add-architecture i386&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update of the database now showed separate amd64 and i386 repos to be loaded. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next I switched to &lt;code&gt;aptitude&lt;/code&gt;, because of the more sophisticated dependency-solver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install aptitude&#xA;&#xA;sudo aptitude --full-resolver -f install wine1.7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Full details: &lt;a href=&quot;http://pastebin.com/Z9Ww11SU&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com/Z9Ww11SU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did in short:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;aptitude suggested a solution where wine1.7 would not be installed, that was selected first (&lt;code&gt;20&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;This solution was rejected with &lt;code&gt;r 20&lt;/code&gt; -- it was a bit complicated for me, I just replicated the commands from the other answer: first selected &lt;code&gt;20&lt;/code&gt; instead of YES or NO; then &lt;code&gt;r 20&lt;/code&gt; (rejecting the removal of Wine 1.7); &lt;/li&gt;&#xA;&lt;li&gt;then &lt;code&gt;n&lt;/code&gt; (It seems that unless you choose &lt;code&gt;Y&lt;/code&gt;, YES, &lt;code&gt;aptitude --full-resolver&lt;/code&gt; gives you new options after each decision; I guess in this case was NO because it said &quot;dependencies unresolved&quot; for Wine); &lt;/li&gt;&#xA;&lt;li&gt;the next step provided the good solution: to install Wine and to downgrade 14 packages: &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ibasn1-8-heimdal libgphoto2-6 libgphoto2-port10 libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal libkrb5-26-heimdal liblcms2-2 libroken18-heimdal libsane libsane-common libwind0-heimdal&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;So, last one was &lt;code&gt;Y&lt;/code&gt; YES, and Wine 1.7 was installed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After that, the installation of &lt;code&gt;playonlinux&lt;/code&gt; went without problems:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;  libwxgtk-media2.8-0{a} mesa-utils{a} playonlinux python-wxgtk2.8{a} python-wxversion{a} &#xA;0 packages upgraded, 5 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-07-09T13:37:47.533" LastActivityDate="2015-07-09T13:37:47.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="353" PostTypeId="1" AcceptedAnswerId="1036" CreationDate="2015-07-09T13:41:18.230" Score="10" ViewCount="5342" Body="&lt;p&gt;Sometimes (rarely) it happens that Slingshot launcher is neither accessible by shortkey or by clicking Applications on panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to force it to restart without logging off?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-13T11:21:13.023" LastActivityDate="2017-02-13T11:21:13.023" Title="How to restart Applications launcher (Slingshot) if it crashes" Tags="|release-freya|slingshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="354" PostTypeId="2" ParentId="349" CreationDate="2015-07-09T14:33:50.133" Score="2" Body="&lt;p&gt;No you can't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched gsettings for list, and it does have a couple of options, but none for the top bar:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/hPWyr.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I wondered if it was somewhere else, so I searched for the names of the &lt;/p&gt;&#xA;&#xA;&lt;p&gt;collunms, specificlally &lt;code&gt;name&lt;/code&gt; and &lt;code&gt;size&lt;/code&gt;. This gave the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.nautilus.list-view default-visible-columns ['name', 'size', 'type', 'date_modified']&#xA;org.gnome.nautilus.list-view default-column-order ['name', 'size', 'type', 'date_modified']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So that shows that only nautilus allows customisation. If you need different information, you could consider installing nautilus.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-09T14:33:50.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="355" PostTypeId="2" ParentId="353" CreationDate="2015-07-09T14:36:02.193" Score="0" Body="&lt;p&gt;The process that &lt;a href=&quot;https://launchpad.net/cerbere&quot; rel=&quot;nofollow&quot;&gt;Cerbere&lt;/a&gt; keeps running in background is &lt;code&gt;slingshot-launcher --silent&lt;/code&gt; so I guess that command might do the trick.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-07-09T14:36:02.193" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="356" PostTypeId="1" AcceptedAnswerId="553" CreationDate="2015-07-09T14:51:42.160" Score="8" ViewCount="1043" Body="&lt;p&gt;I had problems in the past with Nautilus being invasive on some desktops, namely XFCE, when it used to compete with Thunar for the desktop, but not in elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other hand I don't think it's &quot;better&quot; than Pantheon Files; and the more desktops I test, the more I believe that &quot;each its own&quot; is the best philosophy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had tried to avoid installing it, especially since I like the clean elementary OS desktop with just a background and I don't need &lt;a href=&quot;https://elementaryos.stackexchange.com/q/9/170&quot;&gt;folders and files on it&lt;/a&gt;, but in the end it's there and I see no big problems with that - and it brings a lot of features that I personally only need from time to time, like a proper window for the searched files, customizable columns, integration with online applications, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The most notable problem it brings in my case is that it is adopted as default file manager by Firefox downloads list ('Open Containing Folder').&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also think that having a secondary file manager is a good idea. Is using Nautilus risky? What are the risks?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2015-07-18T04:56:23.500" Title="Is Nautilus really &quot;not-recommended&quot;?" Tags="|pantheon-files|nautilus|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="357" PostTypeId="1" AcceptedAnswerId="358" CreationDate="2015-07-09T16:29:28.237" Score="8" ViewCount="2366" Body="&lt;p&gt;I would like to see a full how-to on installing the latest stable version of elementary OS.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="45" LastEditDate="2015-07-09T23:58:06.600" LastActivityDate="2015-07-10T09:41:00.213" Title="How do I install elementary OS?" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="358" PostTypeId="2" ParentId="357" CreationDate="2015-07-09T16:29:28.237" Score="6" Body="&lt;p&gt;Note that the majority of this information is already covered in the elementary &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation guide&lt;/a&gt; that appears when you download. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Click all images to view a bigger version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/P1OXu.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Step 1 - Downloading&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;First, download the file - it will be a &lt;code&gt;.iso&lt;/code&gt; from &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Mvqcs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mvqcss.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you know you have a newer computer with a 64-bit processor, choose the 64-bit version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your computer is older or you do not know which type of processor your computer has, choose the 32-bit version. (64-bit processors will still be able to run this version).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2j3pq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2j3pqm.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Step 2 - Writing to the bootable media.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;When it has finished downloading, you need to either write it to a DVD or a USB. Only use a USB if you are sure your BIOS (the first screen you see when you boot) supports it.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;For booting with a USB (recommended):&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Download and install Unetbootin and open it up. It will look like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eiJgg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eiJggs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the radio button next to Diskimage and then click the &lt;code&gt;...&lt;/code&gt; button to navigate to the &lt;code&gt;.iso&lt;/code&gt; file you just downloaded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ylf8o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ylf8os.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;insert the USB - make sure &lt;em&gt;it is the only USB plugged in&lt;/em&gt;. Then select it from the Drive dropdown:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/S1QTB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/S1QTBs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me the USB I want to use is &lt;code&gt;/dev/sdd1&lt;/code&gt;. Now click OK. It will go through the 4 steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zgODf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zgODfs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/wXjxm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wXjxms.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/4yWDS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4yWDSs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can either click Reboot Now or Exit at this point.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;For booting with a CD (not recommended):&lt;/h3&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Burning from Windows&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Windows 7/8/8.1&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Right-click on an ISO image and choose “Burn disc image”.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CKhTb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CKhTbs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Select a drive and press &quot;Burn&quot;.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/j0FgD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j0FgDs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If you check “Verify disc after burning”, it will verify that the ISO image has been burned correctly&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Burning from Mac OS X&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Launch Disk Utility (Applications → Utilities → Disk Utility).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Insert your blank CD/DVD.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Drag and drop your &lt;code&gt;.iso&lt;/code&gt; file to the left pane in Disk Utility. Now both the blank disc and the &lt;code&gt;.iso&lt;/code&gt; should be listed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Select the &lt;code&gt;.iso&lt;/code&gt; file, and click on the Burn button in the tool bar.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ba3xv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ba3xvs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Ensure that the &quot;Verify burned data&quot; check box is ticked (you may need to click on the disclosure triangle to see the check box).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Click on Burn. The data will be burned and verified.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7eqal.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7eqals.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Burning from Ubuntu&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Right click on the &lt;code&gt;.iso&lt;/code&gt; file and click &quot;Write to Disc&quot;. Click Burn.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/BurningIsoHowto&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Step 3 - Booting&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Insert the DVD or USB and restart.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Booting on a PC&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;As your computer boots up, press the button to access the BIOS:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4dZRf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4dZRfs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the order to have either DVD or USB - depending on which you used, and then save and exit the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Booting on a Mac:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;After you hear the chime, press and hold Option. Then, select the appropriate boot drive. Note that it &lt;em&gt;may&lt;/em&gt; be incorrectly identified as &quot;Windows&quot;, but this is normal.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It will then boot to a screen like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x5YnW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x5YnWs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Step 4 - Installing&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Select Install elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yRH6P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yRH6Ps.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Confirm you have that is needed (6.5 GB disk space and internet connection).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd advise not to download updates (it slows down the install), but I would suggest the third-party software so you can place MP3s and such like and click continue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chose which install method you want - to install along side your current OS or to wipe it. You can also manually change the partitions by clicking something else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chose your location (this will set your time).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2vEQO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2vEQOs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now chose your keyboard - you can auto detect it if you want, this will auto select it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XFUtp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XFUtps.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next chose your name, computer name, username and password:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wcADL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wcADLs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click continue and it will install it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KwkDg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KwkDgs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This can take a long time - 30 minutes or more sometimes. Be patient, and don't power off the computer. It's recommended to keep a laptop plugged in for the duration of the install process.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Step 5 - Use elementary OS&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Finally, when it is installed it will ask you to reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7ok1f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7ok1fs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it boots up, go into the BIOS again and change the boot order back to your Hard Drive first. It should boot pretty quickly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gDPfY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gDPfYs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then you can login and start using it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is likely that you will have a lot of downloads to install, and when they have finished it will request a restart. Do this as soon as possible as they could include security updates.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Any more questions? Feel free to click Ask Question in the Top Right corner.&lt;/h3&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-10T09:41:00.213" LastActivityDate="2015-07-10T09:41:00.213" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="361" PostTypeId="1" AcceptedAnswerId="362" CreationDate="2015-07-09T19:03:26.770" Score="17" ViewCount="1826" Body="&lt;p&gt;Everytime I lose my internet connection, this window appear on the screen:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/364Hs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the connection is reestablished, the windows closes itself if I click on try again. I can close the window any time too&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is this window? And why it appears?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="38" LastEditDate="2015-07-09T19:24:00.630" LastActivityDate="2015-12-25T21:21:47.707" Title="Odd Window appears when I lose connection, 'Unable to load Page'" Tags="|system|capnet-assist|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="362" PostTypeId="2" ParentId="361" CreationDate="2015-07-09T19:22:03.003" Score="14" Body="&lt;p&gt;This is the &lt;a href=&quot;https://launchpad.net/capnet-assist&quot;&gt;Captive Network Assistant&lt;/a&gt; (CapNet Assist). It attempts to find out if your network traffic is being caught in a captive network portal (like what you find in the airport or a coffee shop) and assist you in logging in to this captive network. elementary is still ironing out a few issues with how and when it decides to appear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If CapNet Assist is showing up unexpectedly, please check &lt;a href=&quot;https://bugs.launchpad.net/capnet-assist&quot;&gt;in Launchpad&lt;/a&gt; to make sure that this case has already been reported. If it hasn't been reported, please make a new report describing the situation in which it appears by following the elementary &lt;a href=&quot;https://elementary.io/docs/code/reference#reporting-bugs&quot;&gt;bug reporting guide&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-07-12T20:33:40.873" LastActivityDate="2015-07-12T20:33:40.873" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="363" PostTypeId="2" ParentId="357" CreationDate="2015-07-09T19:38:50.183" Score="3" Body="&lt;p&gt;While simply linking is discouraged, in this instance there is a large, official &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow&quot;&gt;installation guide&lt;/a&gt; that covers many options and will be kept up to date there.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-09T19:38:50.183" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="364" PostTypeId="1" AcceptedAnswerId="365" CreationDate="2015-07-09T23:00:22.850" Score="6" ViewCount="1462" Body="&lt;p&gt;How to create a shortcut that would bring the restart-shutdown menu?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-27T14:33:48.880" LastActivityDate="2016-11-27T14:33:48.880" Title="How to access system shutdown with a shortcut in Freya?" Tags="|release-freya|keyboard-shortcuts|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="365" PostTypeId="2" ParentId="364" CreationDate="2015-07-09T23:05:09.623" Score="3" Body="&lt;p&gt;&lt;strong&gt;This worked in Freya but doesn't work in Loki.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Go to System Settings &gt; Keyboard &gt; Shortcuts &gt; Custom.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add new command by clicking the &lt;kbd&gt;+&lt;/kbd&gt; button and add: &lt;code&gt;gnome-session-quit --power-off&lt;/code&gt;, then press keys to create shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and in to be able to use the new shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/vMzRU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it looks even more elementary OS-style than the default shutdown menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command for the default shutdown menu is (as provided by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/559/170&quot;&gt;this answer&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --session --print-reply --dest=com.canonical.Unity /org/gnome/SessionManager/EndSessionDialog org.gnome.SessionManager.EndSessionDialog.Open uint32:2 uint32:0 uint32:0 array:objpath:[]  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OSDtB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OSDtB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-27T14:33:22.550" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="366" PostTypeId="1" AcceptedAnswerId="486" CreationDate="2015-07-09T23:34:48.290" Score="10" ViewCount="502" Body="&lt;p&gt;By default the application launcher is called with &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; and &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt;. (&lt;a href=&quot;https://elementaryos.stackexchange.com/q/27/170&quot;&gt;It can be changed&lt;/a&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there is a difference; after showing the Applications launcher, the &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; shortcut also hides it if pressed again; &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt; doesn't do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And neither do other shortcuts:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same difference is present if the default shortcuts are changed as indicated in the answers to the linked question: the launcher is shown but not hidden with just the Super key (unlike in Ubuntu Unity). That is my main reason against giving up the default &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; shortcut in favor of just  &lt;kbd&gt;Super&lt;/kbd&gt;  on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;What is special behind &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; ?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-25T01:55:50.117" Title="Why is there a difference between Super-Space and other shortcuts?" Tags="|keyboard-shortcuts|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="367" PostTypeId="1" AcceptedAnswerId="481" CreationDate="2015-07-10T04:37:07.143" Score="9" ViewCount="2393" Body="&lt;p&gt;Is it possible to ignore or remove duplicate entries from the terminal history?  Right now, when I click the up-arrow to go through my previous commands, there are lots of duplicates, or when I use the &lt;code&gt;history&lt;/code&gt; command, it shows lots of duplicate entries. Does pantheon-terminal have the ability to remove/ignore those duplicate entries?&lt;/p&gt;&#xA;" OwnerUserId="277" LastEditorDisplayName="user3" LastEditDate="2015-07-14T10:18:04.370" LastActivityDate="2018-06-30T22:46:40.843" Title="Remove or ignore duplicate entries in terminal history" Tags="|command-line|bash|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="368" PostTypeId="1" AcceptedAnswerId="559" CreationDate="2015-07-10T10:48:51.423" Score="15" ViewCount="821" Body="&lt;p&gt;I can access two different shutdown menus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One is the default one :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/OSDtB.png&quot; alt=&quot;Default elementary shutdown menu&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other is the one triggered by the command &lt;code&gt;gnome-session-quit --power-off&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/hZU8S.png&quot; alt=&quot;gnome-session-quit --power-off - shutdown menu&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When looking for a command that I could use with a shortcut to shut down the system, this is the one I could find.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm curious what is the command for the default menu :)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-09-14T12:38:38.380" LastActivityDate="2016-09-14T12:38:38.380" Title="What is the command behind the default shutdown menu in Freya?" Tags="|release-freya|command-line|shutdown|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="369" PostTypeId="1" AcceptedAnswerId="370" CreationDate="2015-07-10T11:02:45.980" Score="6" ViewCount="2939" Body="&lt;p&gt;On Windows, I can create keyboard shortcuts that launch a program by linking to the program or command and adding a shortcut to the link — here's the &lt;a href=&quot;http://windows.microsoft.com/en-us/windows/create-keyboard-shortcuts-open-programs#1TC=windows-7&quot; rel=&quot;noreferrer&quot;&gt;how-to&lt;/a&gt; I follow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, how can I set the same up on elementary OS?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="190" LastEditDate="2015-07-10T12:13:18.540" LastActivityDate="2019-03-06T16:19:16.243" Title="How can I add a keyboard shortcut to launch a program?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="370" PostTypeId="2" ParentId="369" CreationDate="2015-07-10T11:02:45.980" Score="6" Body="&lt;p&gt;First, open system settings and click keyboard:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lHbNs.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chose Custom, in the sidebar&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/OKGdN.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the + button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/efPO4.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter your command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/r0l8B.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &quot;Disabled&quot;, then press your chosen shortcut and it will show up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/RBvDj.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jeN3u.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, you have to log out and back in for the short cuts to be active.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-10T12:44:41.607" LastActivityDate="2015-07-10T12:44:41.607" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="371" PostTypeId="1" AcceptedAnswerId="372" CreationDate="2015-07-10T11:51:06.857" Score="18" ViewCount="22875" Body="&lt;p&gt;I've added multiple third party PPAs and there are bunch of PPAs which I don't need any more. Is there simple way to remove a PPA?&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="45" LastEditDate="2015-07-10T17:39:11.993" LastActivityDate="2020-05-24T11:28:20.590" Title="How do I remove a PPA?" Tags="|ppa|package-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="372" PostTypeId="2" ParentId="371" CreationDate="2015-07-10T11:51:06.857" Score="27" Body="&lt;p&gt;There are multiple ways to remove a PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 1 :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the Applications menu ( &lt;kbd&gt;super&lt;/kbd&gt; + &lt;kbd&gt;space&lt;/kbd&gt; ) and search for &lt;code&gt;Software and Updates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Software and Updates app, select the &lt;code&gt;Other Software&lt;/code&gt; tab and select the desired PPA from the list. Click &lt;code&gt;Remove&lt;/code&gt; to remove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xN4wS.png&quot; alt=&quot;software and update&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 2:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal, use the &lt;code&gt;-r&lt;/code&gt; or &lt;code&gt;--remove&lt;/code&gt; flag to remove, similar to how the PPA was added. &lt;code&gt;-r&lt;/code&gt; flag will only remove the said PPA. It will not revert any packages.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:repository-name/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 3:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPAs are stored inside &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt;. To list all the installed PPAs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls /etc/apt/sources.list.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note the name of PPA you want to remove (e.g.&lt;code&gt;google-chrome.list&lt;/code&gt;), and remove it in Terminal using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -i /etc/apt/sources.list.d/google-chrome.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 4:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal, use &lt;code&gt;ppa-purge&lt;/code&gt;. It automatically downgrades any packages supplied by the PPA, and then removes the PPA.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge ppa:repository-name/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="129" LastEditorUserId="26" LastEditDate="2015-07-11T15:26:57.787" LastActivityDate="2015-07-11T15:26:57.787" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="373" PostTypeId="1" CreationDate="2015-07-10T12:36:42.260" Score="14" ViewCount="8431" Body="&lt;p&gt;I'd like to be able to use my number pad immediately after login without having to manually activate it by pressing &lt;kbd&gt;NumLock&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="45" LastEditDate="2015-08-01T00:48:59.280" LastActivityDate="2021-01-15T20:40:55.950" Title="How do I enable NumLock at login?" Tags="|settings|keyboard|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="374" PostTypeId="1" CreationDate="2015-07-10T13:51:19.320" Score="4" ViewCount="223" Body="&lt;p&gt;I have poor experience when connecting an MTP device on elementary. More specifically, I'm referring to connecting my Android phone in order to transfer files from/to the file manager. Here are the issues I encounter:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The volume corresponding to my phone's storage correctly appears in the sidepane of Files. Clicking on it correctly mounts it but a message appears in the main window saying I do not own that folder and so I can't access the files in it at all.&lt;/li&gt;&#xA;&lt;li&gt;Without unmounting it, I can access the volume only by opening Files with admin privileges, which of course shouldn't be a default method. But the condition is that the volume is already mounted in the normal-user instance of Files, otherwise I can't mount it directly from the admin window. &lt;/li&gt;&#xA;&lt;li&gt;It is possibile to move, transfer, delete files etc. but actually, in the case of copying for example, it always results in what appears to be partial transfers and thus corrupted files, i.e. a 200MB file &lt;em&gt;looks&lt;/em&gt; correctly transferred from PC to phone when actually 180MB of it have been actually copied.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;What experience do you have? Is this a Ubuntu-related issue or something Files cannot handle properly?&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-07-10T13:51:19.320" Title="Can MTP devices be efficiently handled by Files?" Tags="|pantheon-files|mtp|android|" AnswerCount="0" CommentCount="2" ClosedDate="2015-07-13T16:49:46.617" ContentLicense="CC BY-SA 3.0" />
  <row Id="375" PostTypeId="2" ParentId="373" CreationDate="2015-07-10T14:23:03.087" Score="12" Body="&lt;p&gt;Open &lt;em&gt;System Settings&lt;/em&gt; and click &lt;em&gt;Keyboard&lt;/em&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lHbNs.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Switch to the tab &lt;em&gt;Options&lt;/em&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uKRa0.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now choose &lt;em&gt;Miscellaneous compatibility options&lt;/em&gt; on the left side, and check &lt;em&gt;Default numeric keypad keys&lt;/em&gt; on the right side.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's all!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This setting takes effect after Login and has no effect at the login screen or consoles. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work for you, try checking &lt;em&gt;Numeric keypad keys always enter digits&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user3" LastEditDate="2015-07-12T13:05:55.977" LastActivityDate="2015-07-12T13:05:55.977" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="376" PostTypeId="1" AcceptedAnswerId="377" CreationDate="2015-07-10T15:51:49.877" Score="6" ViewCount="273" Body="&lt;p&gt;I have set the keyboard layout to &quot;Macintosh&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On a Macbook Pro I can use &lt;kbd&gt;Right Alt&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; to get a &lt;code&gt;@&lt;/code&gt; but the Macbook 2.1 doesn't have a right Alt key.&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="190" LastEditDate="2015-07-11T09:56:32.030" LastActivityDate="2018-12-20T17:04:51.730" Title="How to type &quot;@&quot; on a Macbook 2.1" Tags="|keyboard|macintosh|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="377" PostTypeId="2" ParentId="376" CreationDate="2015-07-10T15:51:49.877" Score="6" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to System Settings&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose Keyboard&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;And activate &quot;Left Alt&quot; as &quot;Key to choose 3rd level&quot; in the Options Tab&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/F32mq.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorDisplayName="user3" LastEditDate="2015-07-10T15:55:30.277" LastActivityDate="2015-07-10T15:55:30.277" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="378" PostTypeId="1" CreationDate="2015-07-10T16:30:03.307" Score="2" ViewCount="539" Body="&lt;p&gt;What settings do I have to change such that third-party apps have the same scaling and font size as native elementary apps?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6vurx.jpg&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And where is the right place to file bug reports about this? Qt/KDE for individual apps? Launchpad for elementary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1455227&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1455227&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="5565" LastEditDate="2016-10-06T21:12:29.090" LastActivityDate="2016-10-06T21:12:29.090" Title="Using third-party apps on a high DPI (Retina) display" Tags="|display|pixel-density|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="379" PostTypeId="2" ParentId="378" CreationDate="2015-07-10T17:28:44.597" Score="4" Body="&lt;p&gt;Unfortunately, this is something that has to be fixed by those app or toolkit developers. For example, Google Chrome only just recently started to support HiDPI. Most Gtk3 apps (like the ones we ship by default) should get HiDPI support more-or-less for free with only minor issues to work through. But since HiDPI is still relatively new, not all application toolkits fully support it yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each 3rd party app is going to have it's own way to track bug reports, and some proprietary apps might not accept bug reports at all. The best way to find an app's bug tracker is either through their official website or through a search engine.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-10T17:28:44.597" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="380" PostTypeId="5" CreationDate="2015-07-10T18:55:50.290" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-10T18:55:50.290" LastActivityDate="2015-07-10T18:55:50.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="381" PostTypeId="4" CreationDate="2015-07-10T18:55:50.290" Score="0" Body="Questions related to using/manipulating windows." OwnerUserId="242" LastEditorUserId="242" LastEditDate="2015-07-11T21:47:43.933" LastActivityDate="2015-07-11T21:47:43.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="382" PostTypeId="2" ParentId="9" CreationDate="2015-07-10T18:58:25.617" Score="4" Body="&lt;p&gt;You can use Screenlets, which comes with a folder view Screenlet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install it simply run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install screenlets&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or install it from the Software Centre.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Once it is installed, run &lt;code&gt;screenlets&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;You will see this:&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/MvViH.png&quot; alt=&quot;Screenlets&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Double-Click on folder view, or, select it, then click Launch/Add.&lt;/li&gt;&#xA;&lt;li&gt;You will see this:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/lpgVs.jpg&quot; alt=&quot;FolderViewScreenlet&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;To show it on all workspaces, right click on the Screenlet, and go to &lt;code&gt;Window&amp;gt;Sticky&lt;/code&gt;.&lt;br&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/lfPjI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NB:&lt;/strong&gt; Screenlets are no longer maintained, but should work with elementary OS Freya (tested).&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="242" LastEditDate="2016-04-30T20:11:04.943" LastActivityDate="2016-04-30T20:11:04.943" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="383" PostTypeId="1" CreationDate="2015-07-11T00:43:54.197" Score="10" ViewCount="432" Body="&lt;p&gt;Subtitles are in an external file.  I can change the file, but can't find a 'no subtitles' option.&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2015-07-17T19:15:01.570" Title="How do I turn off subtitles in Audience/Videos?" Tags="|videos|audience|subtitles|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="384" PostTypeId="1" AcceptedAnswerId="386" CreationDate="2015-07-11T08:19:16.767" Score="15" ViewCount="1093" Body="&lt;p&gt;I am looking for a simple application that provides a countdown timer and follows the &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot;&gt;elementary OS HIGs&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorDisplayName="user3" LastEditDate="2015-07-11T21:05:36.720" LastActivityDate="2016-03-25T22:16:58.367" Title="Is there a countdown timer application for elementary OS?" Tags="|software-recommendation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="385" PostTypeId="1" CreationDate="2015-07-11T08:54:30.493" Score="6" ViewCount="1433" Body="&lt;p&gt;Ever since I installed elementary OS, I couldn't get Open Broadcaster Software and Shutter working properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They only capture the background. When asked Shutter to capture the wingpanel, it captures the background region underneath it.&#xA;On the other hand, when asked OBS to use the Xcomposite feature, capturing windows and their subregions works. Again, I can't use full screen capturing in OBS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I currently have 2 graphics cards in this computer. &lt;s&gt;It seems, like Ubuntu has chosen the older one as the primary graphics card.&lt;/s&gt;&lt;/li&gt;&#xA;&lt;li&gt;In Ubuntu's &lt;em&gt;Software &amp;amp; Updates&lt;/em&gt; &gt; &lt;em&gt;Additional Drivers&lt;/em&gt; I can choose from:&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Using X.Org X server -- AMD/ATI display driver wrapper from xserver-xorg-video-ati (open source, tested)&lt;/li&gt;&#xA;&lt;li&gt;Using Video driver for the AMD graphics accelerators from fglrx-updates (proprietary)&lt;/li&gt;&#xA;&lt;li&gt;Using Video driver for the AMD graphics accelerators from fglrx (proprietary)&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;I had selected the &lt;code&gt;fglrx-updates&lt;/code&gt; driver, which gives me much better performance, but buggy screen capturing. Changing to the open source X.org driver fixes the screen capturing bug in Shutter, but the driver does not seem to have OpenGL support (= no OBS). The performance drops significantly aswell.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo lshw -c video&lt;/code&gt; output (currently using the fglrx driver):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-display               &#xA;       description: VGA compatible controller&#xA;       product: Curacao XT [Radeon R9 270X]&#xA;       vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;       configuration: driver=fglrx_pci latency=0&#xA;       resources: irq:50 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff&#xA;  *-display&#xA;       description: VGA compatible controller&#xA;       product: Pitcairn PRO [Radeon HD 7850]&#xA;       vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;       physical id: 0&#xA;       bus info: pci@0000:07:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;       configuration: driver=fglrx_pci latency=0&#xA;       resources: irq:51 memory:d0000000-dfffffff memory:f7b00000-f7b3ffff ioport:c000(size=256) memory:f7b40000-f7b5ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2:&lt;/strong&gt;&#xA;I've installed the latest &lt;em&gt;AMD Catalyst™ 15.7 Proprietary Linux Graphics Driver&lt;/em&gt;. OBS and Shutter still behave the same way; they don't work.&#xA;&lt;a href=&quot;http://support.amd.com/en-us/download/desktop?os=Ubuntu%20x86%2064&quot; rel=&quot;nofollow&quot;&gt;http://support.amd.com/en-us/download/desktop?os=Ubuntu%20x86%2064&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 3:&lt;/strong&gt;&#xA;There seems to be a &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/shutter/+bug/1061001&quot; rel=&quot;nofollow&quot;&gt;report on the shutter launchpad regarding this bug&lt;/a&gt;. I couldn't find anything about OBS, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 4:&lt;/strong&gt;&#xA;Looks like this is indeed a driver issue. &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1080002&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/1080002&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="325" LastEditorUserId="325" LastEditDate="2016-10-10T06:07:18.963" LastActivityDate="2016-10-10T06:07:18.963" Title="Open Broadcaster Software and Shutter only capturing the background (eOS Freya)" Tags="|screenshot|gala|display|" AnswerCount="0" CommentCount="4" ClosedDate="2015-08-17T20:57:42.243" ContentLicense="CC BY-SA 3.0" />
  <row Id="386" PostTypeId="2" ParentId="384" CreationDate="2015-07-11T11:55:04.147" Score="18" Body="&lt;p&gt;I think you need a &lt;a href=&quot;https://en.wikipedia.org/wiki/Pomodoro_Technique&quot; rel=&quot;noreferrer&quot;&gt;pomodoro&lt;/a&gt; App&lt;/p&gt;&#xA;&lt;p&gt;Well there are some that are specifically made for elementary.&lt;/p&gt;&#xA;&lt;h2&gt;&lt;a href=&quot;http://quassy.github.io/elementary-apps/Tomato/&quot; rel=&quot;noreferrer&quot;&gt;Tomato&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NYZV4.png&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Tomato App is a time management application based on the Pomodoro technique, specially developed for the elementary OS 0.3 Freya and elementary OS 0.2 Luna systems.&#xA;You can use the stable PPA now:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:tomato-team/tomato-stable&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install tomato&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.junauza.com/2013/08/5-pomodoro-apps-for-linux-users.html&quot; rel=&quot;noreferrer&quot;&gt;You can find others here.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-11T22:58:28.177" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="387" PostTypeId="1" AcceptedAnswerId="388" CreationDate="2015-07-11T15:35:15.557" Score="34" ViewCount="3331" Body="&lt;p&gt;If I  find a problem with elementary OS or an app that ships by default with elementary OS, how can I report this issue to the developers? What about feature requests? What sort of information about the issue should I provide?&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2018-01-08T06:20:43.733" LastActivityDate="2022-05-15T15:05:57.217" Title="How can I report an issue or request a feature for elementary OS to the developers?" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="388" PostTypeId="2" ParentId="387" CreationDate="2015-07-11T15:35:15.557" Score="44" Body="&lt;p&gt;elementary has provided a thorough &lt;a href=&quot;https://docs.elementary.io/contributor-guide/feedback/reporting-issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug reporting guide&lt;/a&gt; that explains how to file good issue reports in the right place. In short:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Find the &lt;strong&gt;Issues&lt;/strong&gt; page for the app in question on &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Be specific in your summary. Avoid subjective or ambiguous adjectives. Be concise and avoid chatter, but make sure to explain the whole issue.&lt;/li&gt;&#xA;&lt;li&gt;Be prepared to supply more information. If the issue can't be reproduced with the supplied information, a developer may ask for clarification. If you do not respond, your issue will be marked as &lt;strong&gt;incomplete&lt;/strong&gt; and may be closed.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;What if I'm not sure that it's a bug or not?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Sometimes it's not immediately clear if something is a bug or a feature. You can and should file it anyways. Part of reporting issues is confirming them. Even if something was done intentionally, you can start a discussion about changing that behavior.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What if it's a feature request?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;elementary tracks feature request as bug reports. You should file your feature request following the same guidelines. A bug manager will mark it with the &amp;quot;wishlist&amp;quot; status.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I want to make sure it's not a duplicate before filing&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can search for the issue &lt;a href=&quot;https://github.com/issues?q=is%3Aopen+is%3Aissue+user%3Aelementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;in GitHub&lt;/a&gt;. If your report happens to be a  duplicate, select it from the search results and add the &lt;strong&gt;thumbs up reaction&lt;/strong&gt; . Please don't make &amp;quot;me too&amp;quot; comments as this can obscure useful information that would help resolve the issue.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I don't know which project to file against&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;That's okay! Try to do your best to choose the correct project. If you've filed against the wrong project, a bug manager may ask you for more information to help you file against the correct project. Just be prepared to respond.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;This issue is very important to me and I want it fixed right away&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Most of the developers working on elementary OS do so on a volunteer basis, so it may take some time for your issue to be confirmed, assigned, and addressed. However, if you want to draw more attention to your issue you can consider &lt;a href=&quot;https://github.com/bountysource/frontend/wiki/How-To---Post-a-Bounty&quot; rel=&quot;nofollow noreferrer&quot;&gt;placing a Bounty&lt;/a&gt; on it.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="23095" LastEditDate="2022-05-15T15:05:57.217" LastActivityDate="2022-05-15T15:05:57.217" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="389" PostTypeId="1" AcceptedAnswerId="402" CreationDate="2015-07-12T00:22:36.090" Score="11" ViewCount="776" Body="&lt;p&gt;Currently elementary OS Freya uses &lt;code&gt;gnome-screenshot&lt;/code&gt; as its default screenshot utility.&lt;/p&gt;&#xA;&lt;p&gt;This has an annoying bug were screenshots of active windows will show the background around the border.&lt;/p&gt;&#xA;&lt;p&gt;I've found that &lt;a href=&quot;https://launchpad.net/screenshot-tool&quot; rel=&quot;nofollow noreferrer&quot;&gt;screenshot-tool&lt;/a&gt;, an app built for elementary OS, solves this while integrating nicely with the system.&lt;/p&gt;&#xA;&lt;p&gt;How can I change the default application that launches when &lt;kbd&gt;PrtScrn&lt;/kbd&gt; is pressed, from &lt;code&gt;gnome-screenshot&lt;/code&gt; to &lt;code&gt;screenshot-tool&lt;/code&gt;?&lt;/p&gt;&#xA;&lt;br&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;To install &lt;code&gt;screenshot-tool&lt;/code&gt; you can add its PPA, as instructed in the &lt;a href=&quot;https://quassy.github.io/elementary-apps/Screenshot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-apps&lt;/a&gt; blog:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:fabiozaramella/screenshot-tool &amp;amp;&amp;amp; sudo apt-get update&#xA;sudo apt-get install screenshot-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-04-25T02:08:42.497" Title="Change default screenshot utility" Tags="|release-freya|screenshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="390" PostTypeId="1" AcceptedAnswerId="391" CreationDate="2015-07-12T02:42:38.420" Score="2" ViewCount="180" Body="&lt;p&gt;I like it and am curious to know how it knows what to choose.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-12T21:01:02.187" Title="How does the automatic equalizer in Music work?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="391" PostTypeId="2" ParentId="390" CreationDate="2015-07-12T03:11:18.900" Score="5" Body="&lt;p&gt;It doesn't do anything special or particularly complicated. It just checks if the genre of the song is the same as the name of one of the equalizer presets. You can see the code in &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/noise/trunk/view/head:/src/PlaybackManager.vala#L600&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-07-12T21:01:02.187" LastActivityDate="2015-07-12T21:01:02.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="392" PostTypeId="1" AcceptedAnswerId="431" CreationDate="2015-07-12T03:53:49.107" Score="11" ViewCount="23255" Body="&lt;p&gt;I have X11 Forwarding on, and want to use a graphical interface to manage files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I start the default file manager over ssh?&lt;/p&gt;&#xA;" OwnerUserId="142" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-09-05T20:12:17.703" LastActivityDate="2018-10-24T17:07:04.340" Title="How can I start the default file manager from terminal?" Tags="|command-line|file-management|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="393" PostTypeId="2" ParentId="392" CreationDate="2015-07-12T03:53:49.107" Score="11" Body="&lt;p&gt;The file manager is &lt;code&gt;pantheon-files&lt;/code&gt;, so simply running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;works. Because &lt;code&gt;pantheon-files&lt;/code&gt; does not run in the background by default and generates plenty of terminal output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;huey@galactica:~$ pantheon-files&#xA;[_LOG_LEVEL_INFO 11:43:27.546677] Application.vala:155: Files version: 0.2.1&#xA;[_LOG_LEVEL_INFO 11:43:27.546761] Application.vala:157: Kernel version: 3.8.11&#xA;[_LOG_LEVEL_INFO 11:43:27.718180] Application.vala:84: Report any issues/bugs you might find to http://bugs.launchpad.net/pantheon-files&#xA;[_LOG_LEVEL_WARN 11:43:27.722268] [libnotify] Failed to connect to proxy&#xA;[_LOG_LEVEL_WARN 11:43:27.806887] [dconf] failed to commit changes to dconf: GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._g_2dfile_2derror_2dquark.Code2: Failed to create file: Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I chose instead to run it in &lt;code&gt;screen&lt;/code&gt; instead.&lt;/p&gt;&#xA;" OwnerUserId="142" LastActivityDate="2015-07-12T03:53:49.107" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="394" PostTypeId="1" AcceptedAnswerId="507" CreationDate="2015-07-12T03:54:16.793" Score="6" ViewCount="263" Body="&lt;p&gt;Is it possible to save custom equalizer presets in Music?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like to get the best audio out of my audio, so how can I audio my audio while I audio?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-15T19:39:48.687" Title="Is there a way to save custom equalizer settings in Music?" Tags="|music|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="395" PostTypeId="2" ParentId="135" CreationDate="2015-07-12T08:11:24.127" Score="-2" Body="&lt;p&gt;Maybe what you want is to able make screenshot of selected area? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do, then you can use the keyboard shortcut &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;PrntScrn&lt;/kbd&gt;, and your cursor will change to make selection, select your desired area, and release your click/mouse, then your image will be saved to your clipboard!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, Use &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;PrntScrn&lt;/kbd&gt; to save your selection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the full list of keyboard shortcuts for screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lganR.png&quot; alt=&quot;Keyboard Shortcut For Screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="335" LastEditorUserId="22" LastEditDate="2015-07-19T18:49:06.630" LastActivityDate="2015-07-19T18:49:06.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="396" PostTypeId="1" AcceptedAnswerId="439" CreationDate="2015-07-12T08:28:52.520" Score="19" ViewCount="14685" Body="&lt;p&gt;Right now I have to minimize all windows one by one to get to the desktop. Is there a way to directly view the desktop?&lt;/p&gt;&#xA;" OwnerUserId="335" LastEditorDisplayName="user3" LastEditDate="2015-07-13T15:40:51.967" LastActivityDate="2019-12-31T05:14:42.477" Title="How can I view the desktop?" Tags="|keyboard-shortcuts|desktop|" AnswerCount="7" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="397" PostTypeId="5" CreationDate="2015-07-12T09:52:36.010" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T09:52:36.010" LastActivityDate="2015-07-12T09:52:36.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="398" PostTypeId="4" CreationDate="2015-07-12T09:52:36.010" Score="0" Body="refers to the command line interface (CLI) and commands executed through the CLI" OwnerUserId="142" LastEditorUserId="142" LastEditDate="2015-07-22T09:24:38.627" LastActivityDate="2015-07-22T09:24:38.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="399" PostTypeId="5" CreationDate="2015-07-12T09:54:21.880" Score="0" Body="&lt;p&gt;The &lt;a href=&quot;https://launchpad.net/pantheon-terminal&quot; rel=&quot;nofollow&quot;&gt;Pantheon Terminal&lt;/a&gt; is used for entering text commands. It is the default terminal emulator for elementary OS. For the Ubuntu terminal, use &lt;a href=&quot;/questions/tagged/gnome-terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;gnome-terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;gnome-terminal&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Pantheon Terminal is written in &quot;Vala&quot; programming Language. Multiple terminal sessions may be organized within single terminal window as tabs. It's designed to be setup with sane defaults and little to no configuration.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="5565" LastEditDate="2016-10-02T14:31:31.970" LastActivityDate="2016-10-02T14:31:31.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="400" PostTypeId="4" CreationDate="2015-07-12T09:54:21.880" Score="0" Body="Terminal is the elementary OS app for entering text commands, formally known as Pantheon Terminal. For the Ubuntu terminal, use &quot;gnome-terminal&quot;." OwnerUserId="142" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:19.537" LastActivityDate="2016-10-02T14:33:19.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="401" PostTypeId="2" ParentId="396" CreationDate="2015-07-12T10:55:29.923" Score="6" Body="&lt;p&gt;First, install &lt;code&gt;wmctrl&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command to show the desktop is the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And to hide desktop (restore all windows) use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/369/how-can-i-add-a-keyboard-shortcut-to-launch-a-program&quot;&gt;You can add them to a keyboard shortcut,&lt;/a&gt; or a hot corner - like &lt;a href=&quot;https://elementaryos.stackexchange.com/a/439/3&quot;&gt;@Gabriel suggested&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-13T18:55:59.537" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="402" PostTypeId="2" ParentId="389" CreationDate="2015-07-12T11:15:06.420" Score="5" Body="&lt;p&gt;You can add a new keyboard shortcut:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, open system settings and click keyboard:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lHbNs.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chose Custom, in the sidebar&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/OKGdN.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the + button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/efPO4.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter your command - in this case &lt;code&gt;screenshot-tool&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/r0l8B.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &quot;Disabled&quot;, then press your chosen shortcut (in this case &lt;kbd&gt;PrtScrn&lt;/kbd&gt;). You will have to accept it disabling the old shortcut, and then it will show up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/RBvDj.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, you have to log out and back in for the shortcut to be active.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-12T13:56:31.273" LastActivityDate="2015-07-12T13:56:31.273" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="403" PostTypeId="5" CreationDate="2015-07-12T11:47:14.260" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T11:47:14.260" LastActivityDate="2015-07-12T11:47:14.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="404" PostTypeId="4" CreationDate="2015-07-12T11:47:14.260" Score="0" Body="Questions about installing elementary OS in any supported architecture. Post-installation questions should not be under this tag." LastEditorUserId="-1" LastEditDate="2015-07-20T22:20:57.203" LastActivityDate="2015-07-20T22:20:57.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="405" PostTypeId="5" CreationDate="2015-07-12T11:53:58.770" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T11:53:58.770" LastActivityDate="2015-07-12T11:53:58.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="406" PostTypeId="4" CreationDate="2015-07-12T11:53:58.770" Score="0" Body="Questions asking for specific applications that perform a given task or work with a given file format." LastEditorUserId="-1" LastEditDate="2015-07-20T22:22:00.797" LastActivityDate="2015-07-20T22:22:00.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="407" PostTypeId="5" CreationDate="2015-07-12T11:55:35.593" Score="0" Body="&lt;p&gt;Themes are available for elementary OS-wide customization, and separately for individual applications.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:06.580" LastActivityDate="2016-09-28T23:32:06.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="408" PostTypeId="4" CreationDate="2015-07-12T11:55:35.593" Score="0" Body="about changing the appearance of elementary OS and its applications. For questions about functionality, use application-specific tags." LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:18.663" LastActivityDate="2016-09-28T23:32:18.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="409" PostTypeId="5" CreationDate="2015-07-12T11:58:14.910" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T11:58:14.910" LastActivityDate="2015-07-12T11:58:14.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="410" PostTypeId="4" CreationDate="2015-07-12T11:58:14.910" Score="0" Body="Questions about scripting, and writing in any language that relates to elementary OS, for example BASH, Vala and QT." LastEditorUserId="138" LastEditDate="2015-07-27T00:47:34.217" LastActivityDate="2015-07-27T00:47:34.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="411" PostTypeId="5" CreationDate="2015-07-12T12:07:45.640" Score="0" Body="&lt;p&gt;&quot;Personal package archives&quot; serve applications to the public. Launchpad developers bundle and prepare packages for users, who can add PPAs via &lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt; commands or &quot;Software &amp;amp; Updates&quot;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T14:34:57.083" LastActivityDate="2016-10-02T14:34:57.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="412" PostTypeId="4" CreationDate="2015-07-12T12:07:45.640" Score="0" Body="&quot;Personal package archives&quot; serve applications to the public. Launchpad users bundle and prepare packages for users, who can add PPAs via terminal commands or &quot;Software &amp; Updates&quot;." LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:42.317" LastActivityDate="2016-10-02T14:33:42.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="413" PostTypeId="5" CreationDate="2015-07-12T12:08:53.303" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:08:53.303" LastActivityDate="2015-07-12T12:08:53.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="414" PostTypeId="4" CreationDate="2015-07-12T12:08:53.303" Score="0" Body="Questions about Noise, the default music player included in elementary OS" LastEditorUserId="84" LastEditDate="2015-09-03T18:11:15.847" LastActivityDate="2015-09-03T18:11:15.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="415" PostTypeId="5" CreationDate="2015-07-12T12:14:15.110" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:14:15.110" LastActivityDate="2015-07-12T12:14:15.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="416" PostTypeId="4" CreationDate="2015-07-12T12:14:15.110" Score="0" Body="Advanced Packaging Tool, the package manager for Debian-based distributions. It is also the most used tool for installing packages in Ubuntu. Questions about using any of the apt tools should use this tag." LastEditorUserId="-1" LastEditDate="2015-07-20T22:22:05.560" LastActivityDate="2015-07-20T22:22:05.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="417" PostTypeId="5" CreationDate="2015-07-12T12:15:20.607" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:15:20.607" LastActivityDate="2015-07-12T12:15:20.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="418" PostTypeId="4" CreationDate="2015-07-12T12:15:20.607" Score="0" Body="Questions regarding the decisions and rationale behind the design of elementary OS or its software.&#xD;&#xA;" LastEditorUserId="-1" LastEditDate="2015-07-20T22:22:15.100" LastActivityDate="2015-07-20T22:22:15.100" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="419" PostTypeId="5" CreationDate="2015-07-12T12:16:15.797" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:16:15.797" LastActivityDate="2015-07-12T12:16:15.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="420" PostTypeId="4" CreationDate="2015-07-12T12:16:15.797" Score="0" Body="For questions about the lock screen, a feature of elementary OS which lets a user lock the currently-running session behind a password screen. This screen may either be blank or show a screensaver until mouse or keyboard activity is detected." LastEditorUserId="-1" LastEditDate="2015-07-20T22:22:34.547" LastActivityDate="2015-07-20T22:22:34.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="421" PostTypeId="5" CreationDate="2015-07-12T12:18:07.377" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:18:07.377" LastActivityDate="2015-07-12T12:18:07.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="422" PostTypeId="4" CreationDate="2015-07-12T12:18:07.377" Score="0" Body="Questions about keyboards, both touch and otherwise. However, please add the &quot;touchscreen&quot; tag for touchscreen keyboard questions." LastEditorUserId="-1" LastEditDate="2015-07-20T22:19:30.430" LastActivityDate="2015-07-20T22:19:30.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="423" PostTypeId="5" CreationDate="2015-07-12T12:19:07.253" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:19:07.253" LastActivityDate="2015-07-12T12:19:07.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="424" PostTypeId="4" CreationDate="2015-07-12T12:19:07.253" Score="0" Body="For questions concerning the elementary OS kernel (which is the same as Ubuntu's kernel), including compiling, and questions relating to modules&#xD;&#xA;" LastEditorUserId="-1" LastEditDate="2015-07-20T22:20:30.893" LastActivityDate="2015-07-20T22:20:30.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="425" PostTypeId="5" CreationDate="2015-07-12T12:20:37.650" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:20:37.650" LastActivityDate="2015-07-12T12:20:37.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="426" PostTypeId="4" CreationDate="2015-07-12T12:20:37.650" Score="0" Body="File managers provide either a GUI or CLI for interfacing with the file system. This tag can also be used for operations with files, such as copy, duplicating, renaming, etc. Use the tag &quot;files&quot; for elementary OS's default file manager." LastEditorUserId="-1" LastEditDate="2015-07-20T22:19:24.310" LastActivityDate="2015-07-20T22:19:24.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="427" PostTypeId="5" CreationDate="2015-07-12T12:29:56.107" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:29:56.107" LastActivityDate="2015-07-12T12:29:56.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="428" PostTypeId="4" CreationDate="2015-07-12T12:29:56.107" Score="0" Body="For questions regarding the processes that automatically run after booting or after the GUI login." LastEditorUserId="-1" LastEditDate="2015-07-20T22:19:36.870" LastActivityDate="2015-07-20T22:19:36.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="429" PostTypeId="5" CreationDate="2015-07-12T12:30:23.627" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-12T12:30:23.627" LastActivityDate="2015-07-12T12:30:23.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="430" PostTypeId="4" CreationDate="2015-07-12T12:30:23.627" Score="0" Body="This is for questions about upgrading packages or systems, using the command line or the GUI." LastEditorUserId="-1" LastEditDate="2015-07-20T22:20:14.210" LastActivityDate="2015-07-20T22:20:14.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="431" PostTypeId="2" ParentId="392" CreationDate="2015-07-12T13:44:39.440" Score="13" Body="&lt;p&gt;If you want to use the prefered file manager you can use &lt;code&gt;xdg-open&lt;/code&gt;, to open for example the file manager in &lt;code&gt;Projects/&lt;/code&gt; you can use &lt;code&gt;xdg-open Projects/&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;http://linux.die.net/man/1/xdg-open&quot;&gt;xdg-open&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2015-07-12T13:44:39.440" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="432" PostTypeId="2" ParentId="389" CreationDate="2015-07-12T14:38:05.537" Score="0" Body="&lt;p&gt;You could make the &lt;code&gt;gnome-screenshot&lt;/code&gt; command run &lt;code&gt;screenshot-tool&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, make a new file in your home area, called &lt;code&gt;.bash_aliases&lt;/code&gt;, and edit it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;touch .bash_aliases&#xA;scratch-text-editor .bash_aliases&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then into it put the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias gnome-screenshot='screenshot-tool'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and save it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure the system settings will listen to this however.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-12T14:38:05.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="433" PostTypeId="2" ParentId="389" CreationDate="2015-07-12T14:46:05.387" Score="-1" Body="&lt;p&gt;You can change what the binary &lt;code&gt;/usr/bin/gnome-screenshot&lt;/code&gt; points to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, rename it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/bin&#xA;sudo mv gnome-screenshot gnome-screenshot-old&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then create a link from &lt;code&gt;screenshot&lt;/code&gt; (the executable for &lt;code&gt;screenshot-tool&lt;/code&gt;) to &lt;code&gt;gnome-screenshot&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s screenshot gnome-screenshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now when you run the command &lt;code&gt;gnome-screenshot&lt;/code&gt; it will open &lt;code&gt;screenshot-tool&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Note, however, that the shortcut PrtScrn &lt;em&gt;may&lt;/em&gt; be assigned to &lt;code&gt;gnome-screenshot -w&lt;/code&gt; (or with some option). It probably isn't, but if it is it will cause this solution to fail.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-07-12T14:46:05.387" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="434" PostTypeId="1" AcceptedAnswerId="452" CreationDate="2015-07-12T15:13:48.197" Score="5" ViewCount="1431" Body="&lt;p&gt;I read a few articles about the super-minimal window manager &lt;a href=&quot;https://en.wikipedia.org/wiki/Openbox&quot; rel=&quot;nofollow&quot;&gt;Openbox&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to set it up on elementary OS, but it's just not a desktop environment. I would like to run Openbox after I login (just like I can select Kodi). How can I do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there other recommendations that I have to take to implement Openbox successfully?&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="45" LastEditorDisplayName="user3" LastEditDate="2015-08-01T00:48:33.630" LastActivityDate="2015-08-01T00:48:33.630" Title="How can I launch Openbox when I log in?" Tags="|greeter|window-manager|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="435" PostTypeId="1" AcceptedAnswerId="437" CreationDate="2015-07-12T17:21:44.627" Score="4" ViewCount="2333" Body="&lt;p&gt;Consider &lt;a href=&quot;https://elementaryos.stackexchange.com/q/81/170&quot;&gt;this&lt;/a&gt; question on how to change the  login picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot in fact follow none of the answers posted there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But even before re-asking a question like &quot;how to change the login image&quot; I would like to know:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Should the login use the desktop picture? Should it change when the desktop one is changed and so be the same? Because in my case it is NOT.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use to change the &lt;strong&gt;desktop&lt;/strong&gt; wallpaper by going to Settings - Desktop - Wallpaper or just right clicking an image 'Set as desktop background' in Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My &lt;strong&gt;login&lt;/strong&gt; screen is (was) this one no matter what desktop wallpaper I selected:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/88MO8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is, until I followed &lt;a href=&quot;https://elementaryos.stackexchange.com/a/85/170&quot;&gt;this answer&lt;/a&gt; and now the login image is missing: black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The folder /usr/share/backgrounds looks like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9h5Bp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice the added images at the end and the symlink that was created following the linked answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But they are not accessible from Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6oiVH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I found a fix to the lost login image:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Selected one of the default wallpapers that are visible from Settings - Desktop - Wallpaper&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then changed desktop wallpaper again: in this way the login has an image: &lt;strong&gt;the one before the last change&lt;/strong&gt; of the desktop image.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;In fact it's a bug. Also, has a workaround: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1324373&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, also &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1391716&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/h2&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-12T18:48:16.147" Title="Changing desktop background should also change the login picture?" Tags="|greeter|settings|desktop|" AnswerCount="1" CommentCount="3" ClosedDate="2015-07-13T17:35:59.603" ContentLicense="CC BY-SA 3.0" />
  <row Id="437" PostTypeId="2" ParentId="435" CreationDate="2015-07-12T18:39:59.140" Score="3" Body="&lt;p&gt;Related answer: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/120/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer to my question is YES: the login image should also change just by selecting one of the images in &lt;code&gt;/usr/share/backgrounds&lt;/code&gt; from System Settings -Desktop - Wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact there is a bug where the login picture cannot be changed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1391716&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1391716&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;also:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1324373&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-greeter/+bug/1324373&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case the new images copied into &lt;code&gt;usr/share/backgroounds&lt;/code&gt; may not even be seen from System Settings -Desktop - Wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Files as administrator&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the image file in &lt;code&gt;/usr/share/backgrounds&lt;/code&gt; and open its Properties (if you want a new one copy it there first)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change permissions to &lt;code&gt;644&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/gWg6e.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use System Settings -Desktop - Wallpaper as normal&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-12T18:39:59.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="439" PostTypeId="2" ParentId="396" CreationDate="2015-07-12T22:35:35.507" Score="17" Body="&lt;p&gt;I personally like to use &lt;code&gt;Hot corners&lt;/code&gt; to show the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this, first install &lt;a href=&quot;https://wiki.gnome.org/action/show/Projects/DevilsPie?action=show&amp;amp;redirect=DevilsPie&quot; rel=&quot;noreferrer&quot;&gt;devilspie&lt;/a&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install devilspie&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then create a script file with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.code ~/minimize.ds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(or some other text editor) and inside that file paste the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(if&#xA;    (begin&#xA;        (not(is(application_name) &quot;wingpanel&quot;)))&#xA;(if&#xA;    (begin&#xA;        (not(is(application_name) &quot;plank&quot;)))&#xA;(begin&#xA;    (minimize)&#xA;    (quit))&#xA;))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;save and exit the text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then open &lt;code&gt;Preferences/Desktop/Hot corners&lt;/code&gt;, select &lt;code&gt;Personalized order&lt;/code&gt; for one of the corners and in the &lt;code&gt;Execute custom command&lt;/code&gt; text box paste the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;devilspie /home/&amp;lt;user&amp;gt;/minimize.ds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace &lt;code&gt;&amp;lt;user&amp;gt;&lt;/code&gt; with your user name, so it looks like this (I've selected the bottom right corner):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/3GCgr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, moving the mouse to that corner should show you the desktop.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9445" LastEditDate="2019-10-11T22:29:19.933" LastActivityDate="2019-10-11T22:29:19.933" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="440" PostTypeId="1" AcceptedAnswerId="441" CreationDate="2015-07-13T00:57:34.817" Score="1" ViewCount="3528" Body="&lt;p&gt;Everytime I try to run eclipse, my system crashes, it just freezes the screen and I can't do anything. I've already installed the JDK and Eclipse from the official websites, exported the var JAVA_HOME and PATH (in path just added the path to the bin folder of the JDK)&lt;/p&gt;&#xA;" OwnerUserId="339" LastEditorUserId="300" LastEditDate="2015-07-14T18:45:46.970" LastActivityDate="2018-02-04T07:31:17.193" Title="Eclipse freezes elementary OS" Tags="|eclipse|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="441" PostTypeId="2" ParentId="440" CreationDate="2015-07-13T05:39:45.490" Score="4" Body="&lt;p&gt;There are someways to solve that:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you're running on 32 bit version of eclipse try to install 64 bit version.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also It appears on old versions of eclipse try to install latest version. But if you are using older version than Kepler try to adding these two lines in your &lt;code&gt;eclipse.ini&lt;/code&gt;‍‍‍ :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-Dorg.eclipse.swt.browser.DefaultType=mozilla`&#xA;-Dorg.eclipse.swt.browser.XULRunnerPath=/dev/null`&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(I didn't try them in Kepler or Luna maybe it works for them)&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;If you are using OpenJDK try to install Oracle JDK.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Try to increase memory sizes (this way solve my problem before), So adding these lines to &lt;code&gt;eclipse.ini&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-XX:PermSize=256m&#xA;-XX:MaxPermSize=512m&#xA;-Xms1024m&#xA;-Xmx2048m&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Also you can read this &lt;a href=&quot;http://blog.elzapp.com/2014/07/01/making-eclipse-kepler-and-luna-work-on-ubuntu.html&quot; rel=&quot;nofollow&quot;&gt;article&lt;/a&gt; for more info.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorDisplayName="user3" LastEditDate="2015-07-13T18:07:07.070" LastActivityDate="2015-07-13T18:07:07.070" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="442" PostTypeId="2" ParentId="49" CreationDate="2015-07-13T14:37:09.167" Score="6" Body="&lt;p&gt;We need to create a &lt;code&gt;.contract&lt;/code&gt; file in &lt;code&gt;/usr/share/contractor&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run these two commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /usr/share/contractor/openasroot.contract&#xA;sudo nano /usr/share/contractor/openasroot.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then paste in the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Open folder as root&#xA;Icon=pantheon-files&#xA;Description=Open current folder as root privilege&#xA;MimeType=inode;&#xA;Exec=gksudo pantheon-files&#xA;Gettext-Domain=pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.unixmen.com/add-open-folder-root-elementary-os-right-click-menu/&quot; rel=&quot;nofollow&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Just a reminder, be careful when you have root access - bad bad things can happen.&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorDisplayName="user3" LastEditDate="2015-07-13T20:33:00.870" LastActivityDate="2015-07-13T20:33:00.870" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="444" PostTypeId="2" ParentId="396" CreationDate="2015-07-13T17:23:27.073" Score="13" Body="&lt;p&gt;SuperKey + Right/Left might be the easiest if your more of the casual user and are not fully using all the workspaces all the time. This will let you view the desktop. &lt;/p&gt;&#xA;" OwnerUserId="320" LastActivityDate="2015-07-13T17:23:27.073" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="445" PostTypeId="1" AcceptedAnswerId="17962" CreationDate="2015-07-13T17:58:19.547" Score="6" ViewCount="326" Body="&lt;p&gt;Unity has this quite useful feature where you can press the &lt;kbd&gt;Super&lt;/kbd&gt; key for 2-3 seconds to display all the available shortcuts:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/bcHYT.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something similar in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorDisplayName="user3" LastEditDate="2015-07-13T18:14:30.567" LastActivityDate="2019-01-18T11:41:27.000" Title="Is it possible to display keyboard shortcuts like in Unity?" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="446" PostTypeId="1" AcceptedAnswerId="451" CreationDate="2015-07-13T18:15:00.547" Score="5" ViewCount="395" Body="&lt;p&gt;In &quot;Software &amp;amp; Updates - Updates&quot; all look un-checked. But I know they are in fact all enabled:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/V9R2k.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to check them, I cannot, as they are immediately un-checked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NYuEo.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For higher detail see &lt;a href=&quot;https://plus.google.com/+CipricusCipriq/posts/hB7EBjwWnbc?pid=6142868495647820962&amp;amp;oid=109655288210924730560&quot; rel=&quot;nofollow noreferrer&quot;&gt;this video&lt;/a&gt;. (The problem on the update errors reported along with the video on elementary Google+ and also present at the beginning at the video is now outdated/solved; I am referring to what happens after 0:15.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens in fact is that &lt;strong&gt;each click there creates a duplicate (for the recommended, unsupported and important updates)&lt;/strong&gt; in &quot;Software &amp;amp; Updates - Other software&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have solved this just by removing those sources added there in this way so that only one entry is left there for each type.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cdVmj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cdVmj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, all updates and sources are fine. But the problem with the &quot;Software &amp;amp; Updates - Updates&quot; check-boxes is still there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Those check-boxes under &quot;Software &amp;amp; Updates - Updates&quot; still looks un-checked and I have to avoid touching them.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-11-05T13:21:52.273" LastActivityDate="2015-11-05T13:21:52.273" Title="Problem selecting update sources in GUI (Software &amp; Updates - Updates)" Tags="|settings|updates|sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="448" PostTypeId="1" CreationDate="2015-07-13T19:11:00.990" Score="9" ViewCount="6315" Body="&lt;p&gt;I know that &lt;em&gt;sudo&lt;/em&gt; can do some bad things - there are warnings everywhere:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/U4Rwl.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm interested as to what is likely to happen when using &lt;em&gt;sudo&lt;/em&gt; - why is it so dangerous, and what can I do to reduce that danger?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="3757" LastEditDate="2016-05-07T04:02:29.877" LastActivityDate="2016-05-07T04:02:29.877" Title="Why is running commands with sudo dangerous?" Tags="|command-line|sudo|security|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="449" PostTypeId="2" ParentId="448" CreationDate="2015-07-13T19:38:26.907" Score="4" Body="&lt;p&gt;Sudo is used to give a normal user the permissions as an administrateur. One of the bad things that might happen to you &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Using a command to remove the whole &lt;code&gt;/&lt;/code&gt; folder, for example &lt;code&gt;sudo rm -rf /usr&lt;/code&gt; &lt;/li&gt;&#xA;&lt;li&gt;Removing an important application/drivers that will make your desktop unusable, for example &lt;code&gt;sudo apt-get remove wingpanel* slingshot*&lt;/code&gt; &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How to reduce the danger&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Don't ever copy paste commands from sites/social networks that you don't know or what could remove/install&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Learn what each command could do&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;PS : Please don't try any of those commands.This is may broke something(or everything).&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2015-07-13T19:38:26.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="450" PostTypeId="2" ParentId="448" CreationDate="2015-07-13T19:40:32.370" Score="11" Body="&lt;h2&gt;What is &lt;code&gt;sudo&lt;/code&gt;?&lt;/h2&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo&lt;/code&gt; is running the following command with super user (root) privileges. That's basically the &amp;quot;administrator&amp;quot; you might know from other platforms. But why is this dangerous? Because with super user privileges, &lt;em&gt;everything&lt;/em&gt; can be done on your system (as it has access to all files and your system's whole functionality). Remove every single package on your system? Check. Delete every file on your system? Check. Install spyware? Check. &lt;em&gt;Everything&lt;/em&gt; is possible. And that's potentially dangerous after all. Running one unknown &lt;code&gt;bash&lt;/code&gt; script might compromise your system.&lt;/p&gt;&#xA;&lt;h2&gt;How to reduce the potential danger of &lt;code&gt;sudo&lt;/code&gt;?&lt;/h2&gt;&#xA;&lt;p&gt;The most blatant answer is: &lt;em&gt;Common sense&lt;/em&gt; and responsible behavior. You cannot restrict &lt;code&gt;sudo&lt;/code&gt;'s abilities. When you run &lt;code&gt;sudo&lt;/code&gt;, you have to be fully aware of &lt;em&gt;what&lt;/em&gt; you're doing - Your system won't stop you, as it deems your input trustworthy and intended.&lt;/p&gt;&#xA;&lt;p&gt;The message you see above is not there to annoy you as a user, it's there to stop you for a second and think &lt;em&gt;What am I doing here?&lt;/em&gt; - A lot of commands you can find online are either outdated or might cause problems. After all, blogs are main sources for how-to instructions, but they were written from a limited view and can be wrong. They could be written with malicious intents as well - You should never trust a random forums post.&lt;/p&gt;&#xA;&lt;p&gt;Therefore you have to be independent of people telling you what to do. Scrutinize the post - Learn about commands involved: What does this command do? What does the &lt;code&gt;-x&lt;/code&gt; flag mean? How is this supposed to solve my problem? Is this solution up-to-date?&lt;/p&gt;&#xA;&lt;p&gt;For example: If a website is asking you to &lt;code&gt;curl http://link/to/script | sudo bash&lt;/code&gt;, don't do that. Download the script, take a quick look, and after &lt;em&gt;that&lt;/em&gt;, you can run it. Even if the original author did not intend to make the script malicious, someone might have compromised the original author's accounts and uploaded a new, &amp;quot;updated&amp;quot; script. &lt;strong&gt;You&lt;/strong&gt; are the one responsible for your computer's integrity, and therefore &lt;strong&gt;you&lt;/strong&gt; need to be familiar with your system's capabilities.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-13T19:40:32.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="451" PostTypeId="2" ParentId="446" CreationDate="2015-07-13T19:44:44.733" Score="5" Body="&lt;p&gt;It's a bug that has been reported before, &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1176595&quot;&gt;Launchpad: in software source you can't select the updates &lt;/a&gt;. Please mark it as &quot;yes , it affects me&quot; and provide more informations if it's needed, or put a bounty on it to attract some developers to fix it.&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2015-07-13T19:44:44.733" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="452" PostTypeId="2" ParentId="434" CreationDate="2015-07-13T20:06:32.773" Score="6" Body="&lt;p&gt;To do this in a clean way, you will have to create a custom GNOME session file and a X Server session file (first, install openbox via &lt;code&gt;sudo apt-get install openbox obconf menu&lt;/code&gt; of course). Let's take a look at the two files currently present:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/xsessions/pantheon.desktop&lt;/code&gt; (X Server session file):&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Pantheon&#xA;Comment=This session provides elementary experience&#xA;Exec=gnome-session --session=pantheon&#xA;TryExec=wingpanel&#xA;Icon=&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/gnome-session/sessions/pantheon.session&lt;/code&gt; (GNOME session file for Pantheon):&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[GNOME Session]&#xA;Name=Pantheon&#xA;RequiredComponents=gala;gnome-settings-daemon;&#xA;FallbackSession=ubuntu&#xA;DesktopName=Pantheon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, to create your own Openbox session, you need to create two new files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/xsessions/pantheon-openbox.desktop&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Pantheon-Openbox&#xA;Comment=This session provides a custom Openbox experience&#xA;Exec=gnome-session --session=pantheon-openbox&#xA;TryExec=wingpanel&#xA;Icon=&#xA;Type=Application&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/gnome-session/sessions/pantheon-openbox.session&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[GNOME Session]&#xA;Name=Pantheon-Openbox&#xA;RequiredComponents=openbox;gnome-settings-daemon;&#xA;FallbackSession=ubuntu&#xA;DesktopName=Pantheon-Openbox&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You are now able to select your custom session upon login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep in mind that neither Wingpanel nor the GNOME technology stack is really created for working with such a session - while it might work, you can expect rough edges. I really would not recommend to use it that way, but it's an answer to your question. Use on your own risk, of course. &lt;strong&gt;There is no real benefit Openbox is offering over Gala, especially in terms of integration with technologies used by elementary OS.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-13T20:06:32.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="453" PostTypeId="1" CreationDate="2015-07-13T20:47:14.393" Score="7" ViewCount="1847" Body="&lt;p&gt;I just heard that it isn't recommended to use &lt;code&gt;sudo -i&lt;/code&gt; on GUI programs - because it's less secure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any truth here - is there an advantage to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i pantheon-files /location&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;over&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkexec pantheon-files /location&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I used to use &lt;code&gt;gksudo&lt;/code&gt;, but that's been phased out, so now I use &lt;code&gt;sudo -i&lt;/code&gt; to &lt;a href=&quot;https://askubuntu.com/a/632814/186134&quot;&gt;prevent root owning files in my home area&lt;/a&gt;. But should I really be using &lt;code&gt;pkexec&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is apparently the reason:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The environment that PROGRAM will run [in], will be set to a minimal known and safe environment in order to avoid injecting code through &lt;code&gt;LD_LIBRARY_PATH&lt;/code&gt; or similar mechanisms. In addition the &lt;code&gt;PKEXEC_UID&lt;/code&gt; environment variable is set to the user id of the process invoking &lt;code&gt;pkexec&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;What does the above mean (in English), and is there any truth that &lt;code&gt;sudo -i&lt;/code&gt; is more likely than &lt;code&gt;pkexec&lt;/code&gt; to damage my system?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-13T22:12:23.683" Title="What about sudo makes it less secure than pkexec?" Tags="|sudo|pkexec|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="454" PostTypeId="2" ParentId="445" CreationDate="2015-07-13T21:11:36.283" Score="3" Body="&lt;p&gt;May not be all shortcuts, but you can review the Keyboard Shortcuts in System Settings.&lt;/p&gt;&#xA;" OwnerUserId="185" LastActivityDate="2015-07-13T21:11:36.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="455" PostTypeId="2" ParentId="453" CreationDate="2015-07-13T21:48:50.373" Score="10" Body="&lt;p&gt;The commands (&lt;code&gt;pkexec&lt;/code&gt; and &lt;code&gt;sudo -i&lt;/code&gt;) in and of themselves aren't necessarily harmful. However they do different things in terms of granting permissions to apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;sudo&lt;/code&gt; (&quot;substitute user do&quot;) command allows you to run a process as another user, typically the &lt;code&gt;root&lt;/code&gt; user. That is, by default it runs the process as a user with unlimited power.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you use &lt;code&gt;pkexec&lt;/code&gt;, you're using PolicyKit. PolickyKit is the part of the system that keeps track of the types of privileges that certain users and programs should have. It depends on certain policy files being defined that describe these privileges. A policy for Ubuntu Software Center, for example, would grant permission to use &lt;code&gt;apt&lt;/code&gt;, but it wouldn't necessarily grant permission to change network settings. This kind of control is what the documentation you referenced means by &quot;minimal known and safe environment&quot;. The intention is that PolicyKit does not grant more permissions than are necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Why does this matter to you and is it really less safe to run with sudo?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This depends on both the policy written and the app itself. For an app like Files, running with elevated permissions can be pretty dangerous in any case. But imagine that Files had permission to do things you would never want it to do, like create or delete user accounts. Since Files can have 3rd party plugins, imagine that a malicious third party plugin exists that runs in the background and tries to delete accounts. If you've installed software from a PPA or from a downloaded deb, you could already be infected with this type of malware. With a strong PolicyKit policy, Files would never be able to take this action, rendering the malware ineffective. But with &lt;code&gt;sudo&lt;/code&gt;, it would have full permissions to make this malicious change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;But what if the policy isn't strong?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's true that a policy can be written to essentially do the same thing as &lt;code&gt;sudo&lt;/code&gt;. However, policies are managed as part of the system's security updates. So running an app with &lt;code&gt;pkexec&lt;/code&gt; can actually get more secure over time with updates as stronger system policies are written. Using &lt;code&gt;sudo&lt;/code&gt; will always grant full permissions.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-13T22:12:23.683" LastActivityDate="2015-07-13T22:12:23.683" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="457" PostTypeId="1" AcceptedAnswerId="791" CreationDate="2015-07-14T02:01:54.723" Score="10" ViewCount="1783" Body="&lt;p&gt;I'm having problems with screen share on Google Hangouts. When I click screen share I can only share my entire screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to share individual windows or one specific monitor.&lt;/p&gt;&#xA;" OwnerUserId="354" LastEditorDisplayName="user3" LastEditDate="2015-07-14T09:01:20.797" LastActivityDate="2015-07-26T21:04:48.277" Title="How can I share individual windows or a specific display with Google Hangouts?" Tags="|release-freya|google-chrome|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="459" PostTypeId="1" AcceptedAnswerId="1234" CreationDate="2015-07-14T02:11:24.770" Score="12" ViewCount="4642" Body="&lt;p&gt;After using Freya I have discovered there is an issue when dragging and dropping icons. After that, the icon combines with the mouse pointer and moves with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found that this issue can be solved by going to the lock screen and logging in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to have a permanent solution.&lt;/p&gt;&#xA;" OwnerUserId="357" LastEditorUserId="190" LastEditDate="2015-07-14T18:45:22.447" LastActivityDate="2019-04-27T17:54:51.013" Title="How to fix drag and drop issue on elementary OS Freya?" Tags="|release-freya|user-interface|" AnswerCount="7" CommentCount="7" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="460" PostTypeId="2" ParentId="459" CreationDate="2015-07-14T02:19:51.397" Score="11" Body="&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; This has been fixed in the latest release of elementary OS. Please download and install the latest release from &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;our home page&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I've voted to close this as a duplicate of the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How to Report an Issue&lt;/a&gt; question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a pretty well known bug and it affects Ubuntu as well as elementary OS. The Ubuntu hardware team is hard at work on this issue, but there is no permanent fix available at the moment. If there was, it would have gone out as an update already :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can follow the issue &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1390625&quot; rel=&quot;nofollow noreferrer&quot;&gt;in Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully there will be a fix available along with the new hardware stack in August of 2015.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="-1" LastEditorDisplayName="user3" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-15T20:50:09.657" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="461" PostTypeId="2" ParentId="122" CreationDate="2015-07-14T02:45:51.127" Score="1" Body="&lt;p&gt;For a search app with more features, use &lt;a href=&quot;https://launchpad.net/ubuntu/+source/catfish&quot; rel=&quot;nofollow noreferrer&quot;&gt;Catfish&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/sYQxT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can look for it in the &lt;code&gt;Software Center&lt;/code&gt; or install it via command line (ie: in &lt;code&gt;Terminal&lt;/code&gt;) using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install catfish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9" LastActivityDate="2015-07-14T02:45:51.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="462" PostTypeId="1" CreationDate="2015-07-14T02:48:55.643" Score="1" ViewCount="57" Body="&lt;p&gt;Sometimes when I connect my laptop to my TV, my Built-In Display turns off but my TV is turned on, but in the settings it says that both are on. Also, when I try to change the settings (off -&gt; on), the setting switches back. For example, when I click on the button to enable one of the displays, the switch turns back to &quot;off&quot;. I have the Intel Graphics Driver installed. I'm on 0.3 Freya. &lt;/p&gt;&#xA;" OwnerUserId="354" LastActivityDate="2015-07-14T02:48:55.643" Title="HDMI Display not working consistently" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2015-07-14T02:58:59.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="463" PostTypeId="1" AcceptedAnswerId="464" CreationDate="2015-07-14T04:20:23.450" Score="5" ViewCount="1866" Body="&lt;p&gt;I want to change the path of the personal folders I see in my Home (Downloads, Music, Documents, etc) to locations on my Windows partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried editing the file &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; with something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DOWNLOAD_DIR = &quot;/media/Documents/Documents/Downloads&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This doesn't seem to work. What's the best way to do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lb693.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="361" LastEditorDisplayName="user3" LastEditDate="2015-07-14T08:59:21.137" LastActivityDate="2015-07-14T10:14:11.573" Title="How can I change the location of my Personal folders?" Tags="|release-freya|file-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="464" PostTypeId="2" ParentId="463" CreationDate="2015-07-14T07:05:49.167" Score="6" Body="&lt;p&gt;Symlinks might be what you are looking for.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete (or rename if you want to keep the files within) &lt;code&gt;~/Downloads&lt;/code&gt; folder.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In terminal type out the equivalent of:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s /media/Documents/Documents/Downloads /home/pablo/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This would create a link to your windowsdrive, such that when you use your ~/Downloads folder it would be as using &lt;code&gt;/med../Downloads&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Very handy thing with config files etc. and for example Dropbox, for creating a kind of sync between all your computers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This would not &quot;Change the location&quot; of the folders. But it would change where the data you altered in these folders would be saved. I think this is essentially what you are after.&lt;/p&gt;&#xA;" OwnerUserId="320" LastEditorDisplayName="user3" LastEditDate="2015-07-14T08:58:57.347" LastActivityDate="2015-07-14T08:58:57.347" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="465" PostTypeId="2" ParentId="367" CreationDate="2015-07-14T09:12:15.857" Score="4" Body="&lt;p&gt;Answered &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/367/remove-or-ignore-duplicate-entries-in-pantheon-terminal-history#comment699_367&quot;&gt;in comments&lt;/a&gt; by OP:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A couple of restarts and the setting finally &quot;took&quot;. I added &lt;code&gt;export HISTCONTROL=ignoreboth:erasedups&lt;/code&gt; to the bottom of my &lt;code&gt;~/.bashrc&lt;/code&gt; file. Thanks for your help Gilles.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user3" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-14T09:12:15.857" CommentCount="0" CommunityOwnedDate="2015-07-14T09:12:15.857" ContentLicense="CC BY-SA 3.0" />
  <row Id="466" PostTypeId="2" ParentId="463" CreationDate="2015-07-14T10:14:11.573" Score="6" Body="&lt;p&gt;After editing &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; file you have to run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-user-dirs-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="379" LastActivityDate="2015-07-14T10:14:11.573" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="468" PostTypeId="1" AcceptedAnswerId="473" CreationDate="2015-07-14T12:08:16.153" Score="3" ViewCount="3283" Body="&lt;p&gt;I'm trying to run &lt;code&gt;gedit&lt;/code&gt; as root, and heard that it is better to use &lt;code&gt;pkexec&lt;/code&gt; over &lt;code&gt;sudo -i&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I run &lt;code&gt;pkexec gedit&lt;/code&gt; I see this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to init server: Could not connect: Connection refused&#xA;&#xA;(gedit:18425): Gtk-WARNING **: cannot open display: &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Why does this happen, and how can I use &lt;code&gt;pkexec&lt;/code&gt; with &lt;code&gt;gedit&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerDisplayName="user3" LastActivityDate="2015-11-15T15:52:42.520" Title="Why can I not open gedit with pkexec?" Tags="|root|pkexec|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="469" PostTypeId="1" AcceptedAnswerId="470" CreationDate="2015-07-14T13:40:51.973" Score="11" ViewCount="6837" Body="&lt;p&gt;The default options for the dock's icon size in System Settings are &quot;normal&quot; and &quot;large&quot;. Is it possible to set the icon size to &quot;small&quot;?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="45" LastEditDate="2015-07-19T22:03:47.430" LastActivityDate="2017-10-01T16:03:34.547" Title="How can I make the dock's icons smaller?" Tags="|settings|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="470" PostTypeId="2" ParentId="469" CreationDate="2015-07-14T13:48:45.303" Score="21" Body="&lt;p&gt;You can hold &lt;kbd&gt;Ctrl&lt;/kbd&gt; and scroll over the dock to change the icon size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a hidden preferences window for Plank. Hold &lt;kbd&gt;Ctrl&lt;/kbd&gt; and right click on the dock to open a context menu, then select &quot;Preferences&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also open Terminal and type in &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ plank --preferences&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the bottom of the window there is a slider to adjust the size of the icons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bear in mind, that elementary does not provide icons at arbitrary sizes, so your dock icons may appear blurry at some sizes.&lt;/p&gt;&#xA;" OwnerUserId="85" LastEditorUserId="45" LastEditDate="2015-07-19T22:08:17.050" LastActivityDate="2015-07-19T22:08:17.050" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="471" PostTypeId="2" ParentId="469" CreationDate="2015-07-14T13:51:27.480" Score="5" Body="&lt;p&gt;Open the configuration file of the dock:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.config/plank/dock1/settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find the line &lt;code&gt;IconSize=48&lt;/code&gt; and and replace &lt;code&gt;48&lt;/code&gt; by &lt;code&gt;32&lt;/code&gt; or any other number.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-07-14T13:51:27.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="473" PostTypeId="2" ParentId="468" CreationDate="2015-07-14T14:45:03.097" Score="4" Body="&lt;p&gt;According to pkexec man:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The environment that PROGRAM will run it, will be set to a minimal&#xA;  known and safe environment in order to avoid injecting code through&#xA;  LD_LIBRARY_PATH or similar mechanisms. In addition the PKEXEC_UID&#xA;  environment variable is set to the user id of the process invoking&#xA;  pkexec. As a result, pkexec will not allow you to run X11 applications&#xA;  as another user since the $DISPLAY and $XAUTHORITY environment&#xA;  variables are not set. These two variables will be retained if the&#xA;  org.freedesktop.policykit.exec.allow_gui annotation on an action is&#xA;  set to a nonempty value; this is discouraged, though, and should only&#xA;  be used for legacy programs.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thus to make it work - create a policy file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/share/polkit-1/actions/org.freedesktop.policykit.pkexec.policy&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And put inside following text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;!DOCTYPE policyconfig PUBLIC&#xA; &quot;-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN&quot;&#xA; &quot;http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd&quot;&amp;gt;&#xA;&amp;lt;policyconfig&amp;gt;&#xA;&#xA;  &amp;lt;action id=&quot;org.freedesktop.policykit.pkexec.run-gedit&quot;&amp;gt;&#xA;    &amp;lt;description&amp;gt;Run Gedit&amp;lt;/description&amp;gt;&#xA;    &amp;lt;message&amp;gt;Authentication is required to run Gedit&amp;lt;/message&amp;gt;&#xA;    &amp;lt;defaults&amp;gt;&#xA;      &amp;lt;allow_any&amp;gt;no&amp;lt;/allow_any&amp;gt;&#xA;      &amp;lt;allow_inactive&amp;gt;no&amp;lt;/allow_inactive&amp;gt;&#xA;      &amp;lt;allow_active&amp;gt;auth_admin_keep&amp;lt;/allow_active&amp;gt;&#xA;    &amp;lt;/defaults&amp;gt;&#xA;    &amp;lt;annotate key=&quot;org.freedesktop.policykit.exec.path&quot;&amp;gt;/usr/sbin/gedit&amp;lt;/annotate&amp;gt;&#xA;    &amp;lt;annotate key=&quot;org.freedesktop.policykit.exec.allow_gui&quot;&amp;gt;TRUE&amp;lt;/annotate&amp;gt;&#xA;  &amp;lt;/action&amp;gt;&#xA;&#xA;&amp;lt;/policyconfig&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note, this is a policy config &lt;strong&gt;only&lt;/strong&gt; for &lt;code&gt;gedit&lt;/code&gt;, it contains path to the executable. &lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-14T14:45:03.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="474" PostTypeId="1" AcceptedAnswerId="484" CreationDate="2015-07-14T14:51:20.987" Score="14" ViewCount="42189" Body="&lt;p&gt;From &lt;a href=&quot;https://elementaryos.stackexchange.com/a/470/9&quot;&gt;this answer&lt;/a&gt; I learned that &lt;code&gt;Plank&lt;/code&gt; has a &lt;em&gt;Preferences&lt;/em&gt; panel hidden away that can be summoned via:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/pq7Ij.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is this not part of the &lt;code&gt;desktop&lt;/code&gt; preferences plug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mIhi8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-14T17:28:47.743" Title="Why are Plank's preferences hidden away?" Tags="|plank|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="475" PostTypeId="1" AcceptedAnswerId="476" CreationDate="2015-07-14T14:56:57.263" Score="3" ViewCount="200" Body="&lt;p&gt;If I use the same wallpaper on my desktop and on the greeter, there is a little flickering when log in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to integrate a greeter on Pantheon or Gala or something, that makes this transition more fluid or even makes it disappear?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea whether it is feasible or possible or even if it happens due to my graphics.&lt;/p&gt;&#xA;" OwnerUserId="387" LastEditorUserId="45" LastEditDate="2015-08-01T00:48:13.490" LastActivityDate="2015-08-01T00:48:13.490" Title="Flickering when I log in even though I have the same wallpaper before and after logging in" Tags="|greeter|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="476" PostTypeId="2" ParentId="475" CreationDate="2015-07-14T15:09:21.677" Score="5" Body="&lt;p&gt;I suspect it is because login screen (greeter) and the desktop environment are a bit different entities. Lightdm starts the greeter, but desktop is handled by another entity, pantheon. They use same image only because system configures both at the same time when you change it.&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-14T15:09:21.677" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="477" PostTypeId="2" ParentId="474" CreationDate="2015-07-14T15:23:33.780" Score="3" Body="&lt;p&gt;I have suggested this in Launchpad as Blueprint for Switchboard. These sort of feature requests should be carried out on Launchpad, where the developers can see them and decide whether to work on them or not. This StackExchange site is for Technical Q&amp;amp;A, not feature suggestions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blueprints.launchpad.net/switchboard/+spec/plank-preferences&quot; rel=&quot;nofollow&quot;&gt;https://blueprints.launchpad.net/switchboard/+spec/plank-preferences&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="85" LastActivityDate="2015-07-14T15:23:33.780" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="478" PostTypeId="1" AcceptedAnswerId="899" CreationDate="2015-07-14T15:50:37.903" Score="6" ViewCount="14197" Body="&lt;p&gt;I'm using elementary OS Freya installed as a dual boot. Since installing everything was okay. Suddenly, the screen is very dark. With my F-keys I can not control the brightness. If I use my big screen (HDMI) all is okay. I've a Packard Bell EasyNote LS Laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Core i7-2670QM |&#xA;AMD Radeon HD 7670M, 1 GB VRam&lt;/p&gt;&#xA;" OwnerUserId="388" LastEditorUserId="45" LastEditDate="2015-07-19T21:42:03.127" LastActivityDate="2021-08-13T15:03:49.637" Title="How do I change my display brightness?" Tags="|display|brightness|" AnswerCount="6" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="479" PostTypeId="2" ParentId="383" CreationDate="2015-07-14T15:54:40.213" Score="10" Body="&lt;p&gt;It's a bug in Audience and it's already reported on Launchpad: &lt;a href=&quot;https://bugs.launchpad.net/audience/+bug/1362910&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/audience/+bug/1362910&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. If you've wandered to this post and saw this bug, and it affects you - please click &quot;this bug affects me&quot; on a launchpad to let developers know about the IPU&lt;/p&gt;&#xA;" OwnerUserId="386" LastEditorUserId="386" LastEditDate="2015-07-17T19:15:01.570" LastActivityDate="2015-07-17T19:15:01.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="481" PostTypeId="2" ParentId="367" CreationDate="2015-07-14T17:08:14.027" Score="5" Body="&lt;p&gt;The command history is a feature of the &lt;a href=&quot;https://en.wikipedia.org/wiki/Shell_(computing)#Text_.28CLI.29_shells&quot; rel=&quot;noreferrer&quot;&gt;shell&lt;/a&gt;, which is bash, rather than the terminal emulator Pantheon-Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The behavior around duplicates in the &lt;a href=&quot;http://www.gnu.org/software/bash/manual/bash.html#Using-History-Interactively&quot; rel=&quot;noreferrer&quot;&gt;bash command history&lt;/a&gt; can be configured by setting several &lt;a href=&quot;http://www.gnu.org/software/bash/manual/html_node/Bash-Variables.html#Bash-Variables&quot; rel=&quot;noreferrer&quot;&gt;variables&lt;/a&gt; whose name start with &lt;code&gt;HIST&lt;/code&gt;. In particular, &lt;a href=&quot;http://www.gnu.org/software/bash/manual/html_node/Bash-Variables.html#index-HISTCONTROL&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;HISTCONTROL&lt;/code&gt;&lt;/a&gt; is a list of options to tune the behavior. If the option &lt;code&gt;ignoredups&lt;/code&gt; is included, duplicates are not added to the history. More usefully in my opinion, if &lt;code&gt;erasedups&lt;/code&gt; is included, when a duplicate command is issued, the earlier duplicate is removed from the list. Thus &lt;code&gt;ignoredups&lt;/code&gt; retains the duplicate at its earliest position while &lt;code&gt;erasedups&lt;/code&gt; retains the duplicate at its latest position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The place to set this variable is the bash interactive initialization file &lt;code&gt;.bashrc&lt;/code&gt; in your home directory. Open this file in a text editor. Add a line like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HISTCONTROL=erasedups&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Multiple options are separated by colons, so for example if you want to ignore lines that begin with spaces you need&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HISTCONTROL=erasedups:ignorespace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save &lt;code&gt;.bashrc&lt;/code&gt;. The changes will take effect the next time you start bash, i.e. the next time you open a terminal or a new tab. You can also type this command at the bash command line, it will take effect for the shell session in which you type it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the default &lt;code&gt;.bashrc&lt;/code&gt; on elementary OS already includes a setting for &lt;code&gt;HISTCONTROL&lt;/code&gt;. So you'll need to either edit the existing &lt;code&gt;HISTCONTROL=…&lt;/code&gt; line, or add your own at the end of the file (if you add your setting at the beginning, it'll be overridden).&lt;/p&gt;&#xA;" OwnerUserId="190" LastActivityDate="2015-07-14T17:08:14.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="482" PostTypeId="2" ParentId="384" CreationDate="2015-07-14T17:10:31.127" Score="8" Body="&lt;h1&gt;Go For it&lt;/h1&gt;&#xA;&lt;p&gt;Yep I did go fast and recommended a basic app (tomato) but I have dug one more out with more features, but it is doesn't look as good compared to tomato.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5Pi9y.jpg&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;It does have a more configurable timer. It is a simple and stylish productivity app, featuring a to-do list, merged with a timer that keeps your focus on the current task.&lt;/p&gt;&#xA;&lt;p&gt;To install it you can use this ppa :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mank319/go-for-it &amp;amp;&amp;amp; sudo apt-get update &#xA;sudo apt-get install go-for-it&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The github repo is at &lt;a href=&quot;https://github.com/mank319/Go-For-It&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/mank319/Go-For-It&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-03-25T22:16:58.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="483" PostTypeId="2" ParentId="469" CreationDate="2015-07-14T17:14:10.213" Score="7" Body="&lt;p&gt;A better method to configure very quickly is to Hover your mouse over plank and press &lt;kbd&gt;Ctrl&lt;/kbd&gt; and then scroll the mouse. Up increases the size and vice-versa. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This method does have a setback that you do not know what is the current size of the icons and you might get a little blurry icons.&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="22" LastEditDate="2015-07-19T22:39:13.997" LastActivityDate="2015-07-19T22:39:13.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="484" PostTypeId="2" ParentId="474" CreationDate="2015-07-14T17:28:47.743" Score="14" Body="&lt;p&gt;It kind of comes from a place of what Plank &lt;em&gt;is&lt;/em&gt; from a historical perspective.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Back in the GNOME 2 days, there were quite a few docks around. Docky, AWN, Cairo Dock, Kiba, probably a couple of others I don't remember. LibPlank was supposed to be a way that all these dock developers could collaborate on a common base (get it, because you build a dock using planks?). So plank itself is more-or-less a reference implementation of LibPlank. That's kind of why it has a whole bunch of different settings to begin with. It's meant as something you build all kinds of different docks with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS, we technically ship a minor fork called Pantheon Dock. while Pantheon Dock still currently carries all the features of Plank (it sounds like soon we'll have to patch one out for legal reasons, but that's a whole other thing), we don't expose all of them because not all of them make sense in the context of Pantheon or they're only partially implemented.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, Plank can be positioned at the top of the display. Maybe this makes sense in another DE, but it doesn't in Pantheon. You can also align it to the left, but it doesn't respect other panels so it can cover the applications menu. You can manually choose a theme, but Plank automatically uses the theme from your system theme, so this doesn't make sense for us either. You can enable Pressure Reveal, which is a great feature but doesn't work with certain input devices like Wacom Tablets. You can set any icon size you want, but we don't supply icons in every possible size so they'll be blurry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR These options are more-or-less debugging options meant for developers. Not all of them work or make sense in Pantheon. Some of them are works in progress and we hope to have them enabled or exposed some day.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-14T17:28:47.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="485" PostTypeId="2" ParentId="478" CreationDate="2015-07-14T18:53:26.873" Score="-1" Body="&lt;p&gt;I just tested this. It works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd /sys/class/backlight/*/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod 777 ./brightness&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo echo $(cat max_brightness) &amp;gt; ./brightness&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="394" LastActivityDate="2015-07-14T18:53:26.873" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="486" PostTypeId="2" ParentId="366" CreationDate="2015-07-14T20:34:51.710" Score="14" Body="&lt;p&gt;The difference is that &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; is hardcoded right in to Slingshot. It does not check system settings for different keybindings.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I grabbed the latest source code and had a look for the word &quot;Super&quot;. I came across this in one of the source files:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;// Handle super+space when the user is typing in the search entry &#xA;private bool search_entry_key_press (Gdk.EventKey event) { &#xA;    if ((event.keyval == Gdk.Key.space) &amp;amp;&amp;amp; ((event.state &amp;amp; Gdk.ModifierType.SUPER_MASK) != 0)) { &#xA;        hide (); &#xA;        return true; &#xA;    }   &#xA;&#xA;    switch (event.keyval) { &#xA;        case Gdk.Key.Tab: &#xA;            // context view is disabled until we get plugins that are actually &#xA;            // useful with a context &#xA;            // search_view.toggle_context (!search_view.in_context_view); &#xA;            return true; &#xA;    }   &#xA;&#xA;    return false; &#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can see that it is hardcoded to only check for &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; in order to hide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The source code can be found at &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/slingshot/trunk/view/558/src/SlingshotView.vala#L413&quot; rel=&quot;nofollow&quot;&gt;Revision 558, Line 413&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="85" LastEditorUserId="3757" LastEditDate="2016-04-25T01:55:50.117" LastActivityDate="2016-04-25T01:55:50.117" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="488" PostTypeId="1" AcceptedAnswerId="489" CreationDate="2015-07-15T03:18:18.633" Score="3" ViewCount="1695" Body="&lt;p&gt;I just came from Ubuntu, where all (or almost all) applications use the global menu to show the menubar of each application. However, here in elementary OS I'm having problems with all non-elementary applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are a couple of examples:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Atom text editor&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/s2JnN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Sublime text editor&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/XEDeP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, the menubar is displayed as a grayish bar wasting pixels in all those applications. My question is: Is there a way to hide the menu bar? Some applications (like Firefox) toggle the menu bar using the &lt;kbd&gt;alt&lt;/kbd&gt; key. However, this does not work in every case.&lt;/p&gt;&#xA;" OwnerUserId="398" LastEditorUserId="26" LastEditDate="2015-07-15T14:42:06.820" LastActivityDate="2015-12-17T20:57:47.003" Title="How to hide the menubar in non-native applications?" Tags="|applications|gtk|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="489" PostTypeId="2" ParentId="488" CreationDate="2015-07-15T04:15:44.483" Score="4" Body="&lt;p&gt;As far as I know, there is no universal way to hide all menu bars.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To toggle the menu in Atom: &lt;code&gt;View &amp;gt; Toggle Menu Bar&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To toggle the menu in Sublime Text: &lt;code&gt;View &amp;gt; Hide Menu&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="85" LastActivityDate="2015-07-15T04:15:44.483" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="490" PostTypeId="1" AcceptedAnswerId="492" CreationDate="2015-07-15T09:02:55.917" Score="4" ViewCount="1287" Body="&lt;p&gt;How can I change the default cursor to I-beam mode in pantheon terminal?&lt;/p&gt;&#xA;" OwnerUserId="241" LastEditorUserId="3757" LastEditDate="2016-05-07T03:58:31.073" LastActivityDate="2021-03-23T21:16:01.907" Title="Change pantheon terminal cursor type?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="491" PostTypeId="2" ParentId="488" CreationDate="2015-07-15T09:05:45.123" Score="0" Body="&lt;p&gt;This feature does not exist in &quot;stock&quot; elementary OS, however, you can search on Launchpad for projects that introduce this functionality (this functionality you desire is called global menu) and install it via ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know at least two projects:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;wingpanel-featured &lt;/li&gt;&#xA;&lt;li&gt;super-wingpanel&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Also you might want to submit a blueprint to wingpanel's launchpad to introduce this optional functionality :)&lt;/p&gt;&#xA;" OwnerUserId="386" LastEditorUserId="386" LastEditDate="2015-07-15T09:20:14.880" LastActivityDate="2015-07-15T09:20:14.880" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="492" PostTypeId="2" ParentId="490" CreationDate="2015-07-15T09:16:30.533" Score="4" Body="&lt;p&gt;You can do it via &lt;code&gt;dconf-editor&lt;/code&gt; or via &lt;code&gt;gsettings&lt;/code&gt; + terminal.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and type in following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings set org.pantheon.terminal.settings cursor-shape 'I-Beam'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To rollback run following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings set org.pantheon.terminal.settings cursor-shape 'Block'&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;dconf-editor&lt;/code&gt; and navigate to &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt;, open &lt;code&gt;cursor-shape&lt;/code&gt; and set it to I-Beam. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T09:16:30.533" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="493" PostTypeId="1" CreationDate="2015-07-15T11:32:55.627" Score="0" ViewCount="64" Body="&lt;p&gt;I've configured left-top corner to be the Hot Corner to open Slingshot. Weird thing is, it opens only each second time, while every first time it opens and instantly closes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To let you know what I'm talking about I've recorded a video and uploaded it to youtube: &lt;a href=&quot;https://youtu.be/UxLN0WoXeEw&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/UxLN0WoXeEw&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hot corner configuration was performed via GUI, just like on a screenshot below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kl3I3.png&quot; alt=&quot;hot corner configuration&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to launch slingshot from CLI in order to grab some debug output, but it doesn't throw anything in there. Tried to strace and understood it's no good :D Also it doesn't seem like slingshot is crashing - PID doesn't change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas whether this is a glitch due to my misconfiguration, or more like a bug I should report on Launchpad? I've already searched the launchpad and didn't find anything like this, that is why I thought I might be the only one suffering here because my hands are not properly aligned.&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T12:13:49.543" Title="Slingshot + hot corner opening each 2nd time only" Tags="|slingshot|" AnswerCount="1" CommentCount="3" ClosedDate="2015-07-16T07:22:35.560" ContentLicense="CC BY-SA 3.0" />
  <row Id="494" PostTypeId="1" AcceptedAnswerId="496" CreationDate="2015-07-15T11:35:10.330" Score="6" ViewCount="683" Body="&lt;p&gt;I never want to maximize a window when dragging the window to the top of the screen, but it happens most of the time and is really annoying!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want to drag the window to the top of the screen. Is there any way to change this default behavior?&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="320" LastEditDate="2015-07-15T13:39:47.387" LastActivityDate="2015-07-15T18:14:56.257" Title="How can I disable that windows get maximized if i put them on top of the display?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="495" PostTypeId="2" ParentId="478" CreationDate="2015-07-15T11:58:41.953" Score="6" Body="&lt;p&gt;Proper way to do it should be via &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Power&lt;/code&gt; -&gt; &lt;code&gt;Display brightness&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/gX0R0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T11:58:41.953" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="496" PostTypeId="2" ParentId="494" CreationDate="2015-07-15T12:11:26.313" Score="8" Body="&lt;p&gt;You can customize this with gsettings in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior edge-tiling false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;true&lt;/code&gt; to revert to default behavior.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or use the graphical dconf Editor. You need to install it if you haven't done it already:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once it is installed, open it and search for the entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.pantheon.desktop.gala.behaviour edge-tiling&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There you'll see the default setting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can switch this to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to have the desired behavior.&lt;/p&gt;&#xA;" OwnerUserId="34" LastEditorUserId="45" LastEditDate="2015-07-15T18:14:56.257" LastActivityDate="2015-07-15T18:14:56.257" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="497" PostTypeId="2" ParentId="493" CreationDate="2015-07-15T12:13:49.543" Score="2" Body="&lt;p&gt;Turned out to be a bug.&#xA;Submitted it to Launchpad: &lt;a href=&quot;https://bugs.launchpad.net/slingshot/+bug/1474830&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/slingshot/+bug/1474830&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lewis, thanks for confirmation&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T12:13:49.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="498" PostTypeId="1" AcceptedAnswerId="503" CreationDate="2015-07-15T14:12:45.343" Score="6" ViewCount="1401" Body="&lt;p&gt;For example, how can I set &lt;strong&gt;show applications menu&lt;/strong&gt; to the top-left corner?&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="3757" LastEditDate="2016-05-07T04:01:16.180" LastActivityDate="2016-05-07T04:01:16.180" Title="How can I configure Hot Corners from Terminal?" Tags="|command-line|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="499" PostTypeId="2" ParentId="459" CreationDate="2015-07-15T14:26:30.920" Score="2" Body="&lt;p&gt;As a workaround, I use the Switch Display button (F4 or my laptop) to get back to normal.&lt;/p&gt;&#xA;&lt;p&gt;I don't think there is a permanent fix to this bug (that was already reported &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1442431&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1390625&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;Comments under the ubuntu bug say that an upgrade above kernel 3.16 may fix it, while &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1390625/comments/45&quot; rel=&quot;nofollow noreferrer&quot;&gt;another comment&lt;/a&gt; denies this; other comments say that installing &lt;code&gt;xserver-xorg&lt;/code&gt; may also be a solution.&lt;/p&gt;&#xA;&lt;p&gt;I have not tested these possible fixes.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-16T13:31:19.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="500" PostTypeId="1" AcceptedAnswerId="829" CreationDate="2015-07-15T14:49:00.607" Score="2" ViewCount="229" Body="&lt;p&gt;I experimented with some custom Gnome PPAs (ppa:gnome3-team/gnome3 and ppa:gnome3-team/gnome3-staging) and newer versions of lightdm through which I had hoped to fix a problem with a blank screen on resume from suspend. Although not completely sure, this might have caused the problem I am facing now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am no longer able to run elementary software such as:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The Software Updater (doesn't prompt me with the root password dialog prompt anymore):&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/J3G0h.png&quot; alt=&quot;Software Updater&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The Network Manager:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/O8LVR.png&quot; alt=&quot;Network Manager&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What would you recommend me to do?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I have been thinking about a fresh installation but I don't have a separate /home partition. Thus I would loose my private data. Moreover, I would loose my network manager connection and all custom modifications done in /etc&lt;/li&gt;&#xA;&lt;li&gt;I already purged the Gnome3 PPAs and reverted the packages but the problem still persists&lt;/li&gt;&#xA;&lt;li&gt;I had been looking into possibilities of resetting / re-installing all default elementary OS packages but couldn't find a way of doing so. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="147" LastEditorUserId="34" LastEditDate="2015-07-24T10:15:20.630" LastActivityDate="2015-07-27T22:31:18.673" Title="How can I regain required privileges and resolve the authentication problem?" Tags="|root|user|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="501" PostTypeId="1" AcceptedAnswerId="511" CreationDate="2015-07-15T14:57:55.133" Score="10" ViewCount="684" Body="&lt;p&gt;I want to use the scratch text editor to execute python3 scripts. &#xA;Is there a way to do this ?&lt;/p&gt;&#xA;" OwnerUserId="399" LastActivityDate="2015-07-15T21:59:05.707" Title="How can I make Scratch execute scripts" Tags="|code|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="502" PostTypeId="2" ParentId="459" CreationDate="2015-07-15T16:38:09.740" Score="2" Body="&lt;p&gt;Although the answer is clear (&quot;its a bug!&quot;) the workaround might come handy. For some reason moving cursor to the bottom-right corner erases this ghost following my pointer. Not much of a solution but still much better than logging off. Hope it helps someone.&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T16:38:09.740" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="503" PostTypeId="2" ParentId="498" CreationDate="2015-07-15T16:43:59.337" Score="10" Body="&lt;p&gt;It can be done via gsettings.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Find the key you need(play around with grep to find the exact key, its easy):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings list-recursively | grep hotcorner&#xA;org.pantheon.desktop.gala.behavior hotcorner-custom-command ''&#xA;org.pantheon.desktop.gala.behavior hotcorner-bottomright 'none'&#xA;org.pantheon.desktop.gala.behavior hotcorner-topright 'none'&#xA;org.pantheon.desktop.gala.behavior hotcorner-bottomleft 'window-overview'&#xA;org.pantheon.desktop.gala.behavior hotcorner-topleft 'none'&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Next - set it (example below sets top-left corner to open slingshot, the applications menu):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings set  org.pantheon.desktop.gala.behavior hotcorner-topleft 'open-launcher'&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-15T16:43:59.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="504" PostTypeId="1" AcceptedAnswerId="505" CreationDate="2015-07-15T17:58:34.677" Score="10" ViewCount="293" Body="&lt;p&gt;Sometimes I get a notification, but I'm not looking at the screen, so I miss the contents of that notification. Is there a (beautiful and graphical) place where I can review all the content of the notification bubbles that pop up in the top right corner?&lt;/p&gt;&#xA;" OwnerUserId="151" LastEditorUserId="3757" LastEditDate="2016-04-24T06:12:42.730" LastActivityDate="2016-04-24T06:12:42.730" Title="Is there a notification history?" Tags="|release-freya|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="505" PostTypeId="2" ParentId="504" CreationDate="2015-07-15T18:10:54.393" Score="9" Body="&lt;p&gt;At the moment there is not. However, it is a feature that is currently being worked on for the next release of elementary OS :)&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-15T18:10:54.393" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="507" PostTypeId="2" ParentId="394" CreationDate="2015-07-15T19:39:48.687" Score="4" Body="&lt;p&gt;&lt;strong&gt;Saving custom equalizer setting&lt;/strong&gt;   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In noise version 0.3.1 there is an icon in the textfield where the name of the equalizer setting is displayed. With this icon (&quot;arrow down&quot;) you can save your custom equalizer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/taA83.png&quot; alt=&quot;saving custom equalizer setting  &quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="158" LastActivityDate="2015-07-15T19:39:48.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="508" PostTypeId="1" CreationDate="2015-07-15T19:47:08.567" Score="7" ViewCount="259" Body="&lt;p&gt;I know this is a long shot, but I was wondering, seeing as there are so many relative unknowns out there.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="5565" LastEditDate="2016-10-05T20:34:24.340" LastActivityDate="2016-10-05T20:34:24.340" Title="Is there a elementary HIG compliant video editor?" Tags="|design|software-recommendation|video-editor|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="509" PostTypeId="1" AcceptedAnswerId="624" CreationDate="2015-07-15T20:00:57.537" Score="1" ViewCount="254" Body="&lt;p&gt;When I go to &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt; and try to download the iso file the screen goes darker and nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried multiple computers and browsers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/BgTqR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I am currently using Google Chrome ver. Version 43.0.2357.134 (64-bit) I am running OSX 10.11 (Developer Beta 2) &#xA;On this machine I also tried using Safari 9.0 and Firefox 37.0.1 (Without any extensions/plugins)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried on another machine running OSX Yosemite using Safari, Firefox, and Google Chrome (Without extensions/plugins).&lt;/p&gt;&#xA;" OwnerUserId="406" LastEditorUserId="406" LastEditDate="2015-07-17T01:38:56.427" LastActivityDate="2015-07-20T16:44:35.993" Title="I am unable to download elementary OS" Tags="|software-installation|elementary-website|" AnswerCount="1" CommentCount="11" ClosedDate="2015-07-20T22:08:39.847" ContentLicense="CC BY-SA 3.0" />
  <row Id="510" PostTypeId="1" CreationDate="2015-07-15T21:04:05.203" Score="2" ViewCount="287" Body="&lt;p&gt;On boot I am getting the following message,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The Disk Drive for /dev/mapper/elementary--vg-swap_1 is not ready yet or not present.&#xA;&#xA;Continue to wait, or Press S to skip mounting or M for Manual Recovery&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Help on what can I do?&lt;/p&gt;&#xA;" OwnerUserId="409" LastEditorUserId="179" LastEditDate="2015-07-17T12:08:29.237" LastActivityDate="2015-07-17T19:11:45.193" Title="/dev/mapper/elementary--vg-swap_1 is not ready yet or not present - message on boot" Tags="|system-installation|" AnswerCount="0" CommentCount="3" ClosedDate="2015-08-17T21:18:56.643" ContentLicense="CC BY-SA 3.0" />
  <row Id="511" PostTypeId="2" ParentId="501" CreationDate="2015-07-15T21:59:05.707" Score="10" Body="&lt;ol&gt;&#xA;&lt;li&gt;Open Scratch&lt;/li&gt;&#xA;&lt;li&gt;Open Preferences&lt;/li&gt;&#xA;&lt;li&gt;Switch to Extensions&lt;/li&gt;&#xA;&lt;li&gt;Terminal (Close Preferences)&lt;/li&gt;&#xA;&lt;li&gt;Click new Terminal icon in headerbar.&lt;/li&gt;&#xA;&lt;li&gt;Execute Python in attached Terminal.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/HlCvR.png&quot; alt=&quot;Enabling Terminal in Scratch&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/Zhnig.png&quot; alt=&quot;Terminal in Scratch&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-15T21:59:05.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="512" PostTypeId="1" AcceptedAnswerId="514" CreationDate="2015-07-15T22:24:34.673" Score="5" ViewCount="13452" Body="&lt;p&gt;It's no secret that the weakest link on Luna is the file manager. Regular crashes at work is a disaster.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect that it could be replaced by Nautilus or other FM, but I don't know how to do it safely for system and maximally integrate to the Pantheon Shell.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="2708" LastEditDate="2015-12-30T12:00:40.810" LastActivityDate="2015-12-30T12:11:43.683" Title="How to replace file manager in elementary OS?" Tags="|luna|pantheon-files|nautilus|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="513" PostTypeId="1" AcceptedAnswerId="522" CreationDate="2015-07-16T01:32:29.193" Score="9" ViewCount="6001" Body="&lt;p&gt;As elementary does not seem to provide md5 hashes of its &lt;code&gt;.iso&lt;/code&gt;s there is no obvious way to verify that the downloaded file is actually intact / the correct one. What are the md5 hashes of the Luna and Freya release &lt;code&gt;.iso&lt;/code&gt;s?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there other ways to verify the integrity of the images?&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2023-07-17T20:31:57.373" Title="How to verify the downloaded .iso file?" Tags="|download|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="514" PostTypeId="2" ParentId="512" CreationDate="2015-07-16T01:37:21.810" Score="4" Body="&lt;p&gt;I disagree with your perception of Files, which I consider the best file manager around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My recommendation would actually be to install Freya which comes with the &lt;em&gt;much&lt;/em&gt; improved version of Files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still want to install another file manager, it's as simple as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install &amp;lt;your-choice&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Nothing bad will happen with any extra file manager you install as long as I am aware (and I've installed many just to try).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;ADD&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As igrossiter says (thank you for reminding me of this), if you install &lt;code&gt;Nemo&lt;/code&gt; you might end up with an &quot;un-closable&quot; window in your desktop that you can't close (see &lt;a href=&quot;https://plus.google.com/u/0/111265810590904391682/posts/QfdoPoxDeDm&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this you need to add &lt;code&gt;--no-desktop&lt;/code&gt; to the &lt;code&gt;nemo.desktop&lt;/code&gt; file so it reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=nemo --no-desktop %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2015-07-16T14:44:48.310" LastActivityDate="2015-07-16T14:44:48.310" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="515" PostTypeId="1" AcceptedAnswerId="612" CreationDate="2015-07-16T06:12:41.027" Score="3" ViewCount="167" Body="&lt;p&gt;Usually I work with all my windows being maximised except for those that cannot be maximised (e.g. calculator). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to tweak the behaviour as such that all maximisable windows always open maximised?&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-20T13:40:35.907" Title="How can I force all maximisable windows to open maximised?" Tags="|window-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="516" PostTypeId="2" ParentId="513" CreationDate="2015-07-16T06:54:43.013" Score="0" Body="&lt;p&gt;You can find the MD5 on &lt;a href=&quot;http://sourceforge.net/projects/elementaryos/files/stable/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://sourceforge.net/projects/elementaryos/files/stable/&lt;/a&gt;, might be an idea for the team to make these a bit more easy to find on elementary.io. (It's the &amp;quot;i&amp;quot; button on the right there next to the downloaded graph icon)&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JgvBQ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update (2023)&lt;/strong&gt;: Since the project moved away from SourceForge, the &amp;quot;Files&amp;quot; tab has been removed. However, the MD5s for very old releases can still be found in the &lt;a href=&quot;https://web.archive.org/web/20230000000000*/http://sourceforge.net/projects/elementaryos/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wayback Machine archive&lt;/a&gt; for that URL. Here's &lt;a href=&quot;https://web.archive.org/web/20120202004538/http://sourceforge.net/projects/elementaryos/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;an example for Jupiter&lt;/a&gt; (0.1), which jibes with &lt;a href=&quot;https://archive.org/details/elementaryos0.1-jupiter-i386.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;i386&lt;/a&gt; and &lt;a href=&quot;https://archive.org/details/elementaryos0.1-jupiter-amd64.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;amd64&lt;/a&gt; ISOs available on archive.org. I &lt;em&gt;just&lt;/em&gt; downloaded and verified those two.&lt;/p&gt;&#xA;" OwnerUserId="320" LastEditorUserId="13077" LastEditDate="2023-07-17T20:31:57.373" LastActivityDate="2023-07-17T20:31:57.373" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="517" PostTypeId="1" AcceptedAnswerId="526" CreationDate="2015-07-16T07:18:59.460" Score="6" ViewCount="1610" Body="&lt;p&gt;When I click on files in plank nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried run it throw terminal and get following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;[_LOG_LEVEL_INFO 09:12:19.775418] Application.vala:155: Files version: 0.2.2&#xA;[_LOG_LEVEL_INFO 09:12:19.775509] Application.vala:157: Kernel version: 3.16.0-43-generic&#xA;[_LOG_LEVEL_WARN 09:12:19.779318] Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-Amn1kcn0AB: Verbindungsaufbau abgelehnt&#xA;Failed to register: Zeitüberschreitung wurde erreicht&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Zeitüberschreitung wurde erreicht [DE] = Timeout was reached, Verbindungsaufbau abgelehnt = Connection rejected)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What does this means?&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="26" LastEditDate="2015-09-03T10:23:12.763" LastActivityDate="2016-07-11T20:12:28.677" Title="Why I can't open files / pantheon-files sometimes?" Tags="|pantheon-files|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="518" PostTypeId="1" CreationDate="2015-07-16T07:20:03.927" Score="3" ViewCount="2277" Body="&lt;p&gt;I am not new to this installation and stuffs but this is the first time I have come across this problem.&#xA;       The below image is my partition table from Windows 8.1:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7scjf.png&quot; alt=&quot;Patition table Windows 8.1 showing C D E drives&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, when I install any Linux distro; currently trying to install elementary OS Luna(because Freya has graphical glitches on my laptop with broadwell hd 5500 gfx), the installation wizard shows only one partition of my whole 1TB hard drive. It is neither showing the free space nor the C, F and E drives that are present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/T1ztC.jpg&quot; alt=&quot;Elementary Installation Wizard showing only single 1TB drive&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me with this?&lt;/p&gt;&#xA;" OwnerUserId="416" LastEditorUserId="179" LastEditDate="2015-07-17T12:08:15.667" LastActivityDate="2015-07-17T12:08:15.667" Title="elementary OS Luna does not recognize my partitions during installation" Tags="|system-installation|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="519" PostTypeId="1" AcceptedAnswerId="520" CreationDate="2015-07-16T10:21:40.340" Score="1" ViewCount="82" Body="&lt;p&gt;I am a frequent user of the overview mode provided by &lt;code&gt;Meta + w&lt;/code&gt;. There I can select a window by using left mouse click on the window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it also possible to select a window using only the keyboard?&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-16T10:25:44.697" Title="How can I select a window in overview mode (Meta + w) using the keyboard?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="520" PostTypeId="2" ParentId="519" CreationDate="2015-07-16T10:25:44.697" Score="2" Body="&lt;p&gt;It doesn't seems like there is such functionality... instead I can suggest you to use Super + Arrow Down, you'll be able to select the window with arrow keys, and &quot;Select&quot; with Enter button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And, it sounds like a feature request to me :) Submit it to Launchpad as a blueprint?&lt;/p&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-16T10:25:44.697" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="521" PostTypeId="1" AcceptedAnswerId="523" CreationDate="2015-07-16T10:45:54.697" Score="6" ViewCount="1618" Body="&lt;p&gt;How can I replace a single Icon (In my case Inkscape and terminator) without interfering with my current Icon theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I use the elementary+ Icon theme it has an orange Inkscape Icon and I don't find anything Orange in it therefore I made a couple of different Icons for it following the HIG. How do I place these Icons so that it Do Not Replace the Old Theme Icons (i.e. there files) but my icons are used in the system. &lt;/p&gt;&#xA;" OwnerUserId="179" LastActivityDate="2015-07-16T13:06:34.183" Title="How can I replace a single App Icon" Tags="|icons|themes|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="522" PostTypeId="2" ParentId="513" CreationDate="2015-07-16T11:41:22.327" Score="9" Body="&lt;p&gt;Up-to-date hashes for recent releases are available from the &lt;a href=&quot;https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;Verify your Download&lt;/a&gt; section from the Installation documentation.&lt;/p&gt;&#xA;&lt;p&gt;Here are some checksums for older (no longer supported) releases, linked to the relevant Wayback Machine archive for that release, when available:&lt;/p&gt;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20180517082248/https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;Loki 0.4.1&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-0.4.1-stable.20180214.iso&#xA;sha256sum   5c499579e6ba05eed5626abbbb68fc1e3660e23ccb6a27f1a5f7794fed98bd56&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20160614103641/http://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya 0.3.2&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-0.3.2-stable-i386.20151209.iso&#xA;sha256      97e143e762a1d1e3abac9eba33a59a7a6b9f319a7063cd47e406678c379fc683&#xA;&#xA;elementaryos-0.3.2-stable-amd64.20151209.iso&#xA;sha256      ee737ffa6bf33b742c5a7cee17aa26dec5ee3b573cbbc4b53cbe2a2513c9197a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20150907181424/http://elementary.io/en/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya 0.3.1&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;p&gt;&lt;em&gt;The layout for the above Wayback URL is a bit messed up. It's still readable if you switch to &amp;quot;Reader Mode&amp;quot; in your browser, or search for &lt;code&gt;shasum&lt;/code&gt; in the page source.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-stable-0.3.1-i386.20150903.iso&#xA;sha256      75b6cf0afc8a8d46bdcd646d5f22aac0496c3dd7bf8eafb8897933bfb7048f22&#xA;&#xA;elementaryos-stable-0.3.1-amd64.20150903.iso&#xA;sha256      ca0f5933231fc2d75ef4e82c177c8150a3def9ddb78db8f24da1c6a0c6037390&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;Freya 0.3&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-freya-amd64.20150411.iso&#xA;md5         742cc5b2c21bb1872954b13b7b2091a3&#xA;sha1        ff02eec5cba2c060fd3a5ac85b48d4075bb4f1a3&#xA;sha256      a7b8edfe95eb1c12745e02c63f830cad06ee756f552cba1cdca7bc30b7ca39e7&#xA; &#xA;elementaryos-freya-i386.20150411.iso&#xA;md5         0ad75a048a89ee0bde5d7d333e5d5baf&#xA;sha1        4b82a9566c37464ca85eb29181e05cf538dd67f0&#xA;sha256      941ae370d27fe496fd10723a2803cfa52ddbce510ea502f20ec15a7127a68cab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;Luna 0.2&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-stable-amd64.20130810.iso&#xA;md5         a9db612a2406da80dfe4750747c0aca3&#xA;sha1        55569accf98578e2c3daf25329421d0248281e61&#xA;sha256      bfd2d56ec2936e7634f466372be6c839af12a8f7df956c0989664dcf9029da18&#xA; &#xA;elementaryos-stable-i386.20130810.iso&#xA;md5         b48b6841b920fd0d4bee67aa68de4da5&#xA;sha1        393c54cc91b57ee9133cae28ca0852080527656d&#xA;sha256      fb00edb0037e3ed6e4d15e035bd9e450e148c1aa18a15e26c839fb550e075051&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20120430013522/http://sourceforge.net/projects/elementaryos/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Jupiter 0.1&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos0.1-jupiter-amd64.iso&#xA;md5         50f66928dd74cbeaf3fbd38b74f81adc&#xA; &#xA;elementaryos0.1-jupiter-i386.iso&#xA;md5         c0f612d3d2e8c8cddc6a72a80f5f6480&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="13077" LastEditDate="2023-06-30T19:29:38.787" LastActivityDate="2023-06-30T19:29:38.787" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="523" PostTypeId="2" ParentId="521" CreationDate="2015-07-16T11:47:43.900" Score="9" Body="&lt;p&gt;I also wanted to customize some icons from elementaryPlus theme. Here is a solution which however requires a little bit of command line juggling. Basically I created a custom icon theme which inherits from the original elementaryPlus theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Make sure the target directory exists&#xA;mkdir ~/.icons&#xA;&#xA;# Copy original elementaryPlus icon theme&#xA;cp -r /usr/share/icons/elementaryPlus ~/.icons&#xA;&#xA;# Rename new icon theme&#xA;cd ~/.icons &amp;amp;&amp;amp; mv elementaryPlus elementaryPlusCustomized&#xA;&#xA;# Remove existing icons from new icon theme&#xA;cd ~/.icons/elementaryPlusCustomized &amp;amp;&amp;amp; find . -type f -not -name index.theme -delete&#xA;&#xA;# Edit index.theme file from new icon theme and change Name and Inherits values:&#xA;# Name=elementary+ Customized&#xA;# Inherits=elementaryPlus&#xA;scratch-text-editor ~/.icons/elementaryPlusCustomized/index.theme&#xA;&#xA;# Use new icon theme&#xA;gsettings set org.gnome.desktop.interface icon-theme 'elementaryPlusCustomized'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the icons in the new theme will be preferred over the original ones. It's also safe to update the original elementaryPlus theme.&lt;/p&gt;&#xA;" OwnerUserId="228" LastActivityDate="2015-07-16T11:47:43.900" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="524" PostTypeId="1" CreationDate="2015-07-16T12:04:25.207" Score="-3" ViewCount="170" Body="&lt;p&gt;My laptop screen's brightness shifts to maximum value (100%) when I try to re-login after logging out or locking the session. However, no such problem is seen after restart or shutdown (OS remembers the previous brightness value). So, its only after logout or lock that my screen brightness will be set to 100% automatically. Please help me to fix this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use elementary OS freya (fresh installation).&lt;/p&gt;&#xA;" OwnerUserId="420" LastEditorUserId="34" LastEditDate="2015-07-24T10:14:26.733" LastActivityDate="2015-07-24T10:14:26.733" Title="Brightness jumps to 100% after log out/lock on freya stable (Fresh Installation)" Tags="|brightness|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ClosedDate="2015-07-24T09:46:52.640" ContentLicense="CC BY-SA 3.0" />
  <row Id="525" PostTypeId="2" ParentId="518" CreationDate="2015-07-16T12:49:58.227" Score="1" Body="&lt;p&gt;Fact you've same problem with ubuntu makes issue a lot more clear. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think I've found a solution in another discussion. Link to original post is in the bottom. Quote:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You have two issues. Windows only boots in BIOS mode from MBR(msdos)&#xA;  partitioned drives. It looks like drive was originally gpt. And when&#xA;  you install Windows in BIOS boot mode it does not correctly convert to&#xA;  MBR, but leaves a backup gpt partition table. Windows only boots from&#xA;  gpt drives with UEFI, so if you want to convert to gpt partitioning,&#xA;  you have to reinstall Windows in UEFI boot mode, if your hardware is&#xA;  also UEFI capable.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;You can remove backup gpt partition table with fixparts. The Linux&#xA;  will see it as MBR without issue. FixParts is the easiest way to&#xA;  remove the stray GPT data. GPT fdisk (gdisk or sgdisk) can do it, but&#xA;  the procedure's a bit more involved.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;http://www.rodsbooks.com/fixparts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rodsbooks.com/fixparts/&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;But it also looks like you have used all 4 primary partitions. You&#xA;  have to convert one primary to an extended partition, so you can&#xA;  create as many logical partitions as you want inside the extended. Do&#xA;  not create partitions with Windows as it will convert to dynamic&#xA;  partitions which does not work with Linux at all.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/149821/my-disk-already-has-4-primary-partitions-how-can-i-install-ubuntu&quot;&gt;My laptop already has 4 primary partitions: how can I install Ubuntu?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/452335/unable-to-recognize-and-create-partitions-for-ubuntu-installation-on-dell-inspir&quot;&gt;https://askubuntu.com/questions/452335/unable-to-recognize-and-create-partitions-for-ubuntu-installation-on-dell-inspir&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="386" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-16T16:52:23.413" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="526" PostTypeId="2" ParentId="517" CreationDate="2015-07-16T12:53:36.707" Score="6" Body="&lt;p&gt;Okay, this is based on research (and I fear my answer will be rather technical), but your problem seems to be caused by &lt;code&gt;dbus&lt;/code&gt;, a way for applications to communicate with other applications (so-called inter-process communication, you can learn about it on &lt;a href=&quot;https://en.wikipedia.org/wiki/D-Bus&quot;&gt;Wikipedia&lt;/a&gt;). People had this problem in the past with Nautilus (the GNOME file manager) as well (there is a &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=727622&quot;&gt;bug report on the GNOME bug tracker&lt;/a&gt; about that problem, unfortunately it does not hold any solution).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, is there any solution / answer to this? Not really, as we cannot pin down the application that is not responding via &lt;code&gt;dbus&lt;/code&gt; (at least not without diving deep into the source code and start debugging). My &lt;strong&gt;assumption&lt;/strong&gt; is it is related to &lt;code&gt;gvfs&lt;/code&gt; (a virtual filesystem, providing access to files from various sources, for example via &lt;code&gt;SMB&lt;/code&gt;, &lt;code&gt;NFS&lt;/code&gt; or other protocols). If you have external file sources (for example any network location) in Files and the problem persists, you could try to remove these network locations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally, if the problem persists, you should open a bug report on &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot;&gt;Launchpad&lt;/a&gt;, so the developers can try to track it down. If the problem does not persist, something went wrong (this does happen sometimes, it's hard to track down those hiccups), but everything should be fine, at least after a reboot.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-16T12:53:36.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="528" PostTypeId="2" ParentId="524" CreationDate="2015-07-16T13:45:02.703" Score="3" Body="&lt;p&gt;This bug has been reported on Launchpad before, &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1322725&quot; rel=&quot;nofollow&quot;&gt;&#xA;100% initial brightness on boot [laptops]&lt;/a&gt;. Please mark it as &quot;it affects me&quot; , provide more informations to help the dev fix it or put a bounty on it so it can be fixed as soon as possible.&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2015-07-16T13:45:02.703" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="529" PostTypeId="2" ParentId="517" CreationDate="2015-07-16T13:49:41.247" Score="1" Body="&lt;p&gt;Reinstalling &lt;code&gt;Pantheon-files&lt;/code&gt; might help you fix this. You can report your issue &lt;strong&gt;&lt;a href=&quot;https://launchpad.net/pantheon-files&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/strong&gt;, run Files using &lt;code&gt;pantheon-files -d&lt;/code&gt;, &lt;code&gt;-d&lt;/code&gt; is for debug mode. Copy the result in your terminal and paste it in your report bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to reinstall Files follow this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/229/how-can-i-purge-scratchs-configuration-and-or-re-install-it/230#230&quot;&gt;&#xA;How can I purge Scratch's configuration and / or re-install it?&#xA;&lt;/a&gt;, in your case the package name is &lt;code&gt;pantheon-files&lt;/code&gt; instead &lt;code&gt;scratch-text-editor&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-16T13:49:41.247" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="530" PostTypeId="2" ParentId="508" CreationDate="2015-07-16T14:01:13.053" Score="4" Body="&lt;p&gt;At this time you can be happy when having a &lt;em&gt;working&lt;/em&gt; video editor on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kdenlive from the 14.04 Repo is very outdated and has some problems. The newer builds from the ppa rely on newer dependencies and don't work on 14.04. It is also not very intuitive.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://kdenlive.org/download-ubuntu&quot; rel=&quot;nofollow&quot;&gt;https://kdenlive.org/download-ubuntu&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/~sunab/+archive/ubuntu/kdenlive-release&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/~sunab/+archive/ubuntu/kdenlive-release&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Pitivi has still no stable build of the newer versions. But the UI looks really good. Maybe it is elementary HIG compliant?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://fundraiser.pitivi.org/download-bundles&quot; rel=&quot;nofollow&quot;&gt;http://fundraiser.pitivi.org/download-bundles&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You can install Openshot from the Ubuntu Repo. I haven't tested it but it seems to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Their PPA is outdated. They are working on the 2.0 release.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.openshot.org/ppa/&quot; rel=&quot;nofollow&quot;&gt;http://www.openshot.org/ppa/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Cinelerra is really ugly and not intuitive at all! Maybe it works for some people. The version you can download from the website runs on freya.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://cinelerra.org/2015/&quot; rel=&quot;nofollow&quot;&gt;http://cinelerra.org/2015/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="115" LastEditorUserId="85" LastEditDate="2015-07-16T15:48:41.570" LastActivityDate="2015-07-16T15:48:41.570" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="531" PostTypeId="1" AcceptedAnswerId="532" CreationDate="2015-07-16T14:33:41.960" Score="10" ViewCount="494" Body="&lt;p&gt;elementary is a very large project, spanning many domains. This can make it difficult to follow on a &quot;high&quot; level. As a (potential) community member, what resources are available for me to follow the &lt;em&gt;active&lt;/em&gt; development of elementary OS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Where should I look for the latest programming updates?&lt;/li&gt;&#xA;&lt;li&gt;Do elementary developers, designers, or supporters have blogs I can read?&lt;/li&gt;&#xA;&lt;li&gt;Are there social media outlets that are actively being updated?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It can sometimes be difficult to get a sense of what is happening in elementary, as is the case with many online projects and communities.&lt;/p&gt;&#xA;" OwnerUserId="85" LastActivityDate="2015-07-16T16:51:48.140" Title="What resources can I use to follow the active development of elementary OS?" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="532" PostTypeId="2" ParentId="531" CreationDate="2015-07-16T15:37:58.790" Score="12" Body="&lt;h2&gt;Where should I look for the latest programming updates?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In general, &lt;a href=&quot;https://launchpad.net/elementary&quot;&gt;Launchpad&lt;/a&gt; is where you can observe development happen. New code pushed to development branches, bugs being fixed, basically everything going on regarding elementary OS' codebase. You can also take a look at &lt;a href=&quot;https://code.launchpad.net/elementary/+branches?field.lifecycle=CURRENT&amp;amp;field.lifecycle-empty-marker=1&amp;amp;field.sort_by=most+recently+changed+first&amp;amp;field.sort_by-empty-marker=1&quot;&gt;which branches are most recently updated&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/elementary/+bugs?orderby=-date_last_updated&amp;amp;start=0&quot;&gt;which bugs are updated most recently&lt;/a&gt; via Launchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're interested in what the latest feature / bug fix update feels like, you could set up a VM or a dedicated system (whatever you have available) running with our &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily&quot;&gt;daily repository&lt;/a&gt;. This repository gets new packages every day, as it daily builds the latest development branches for elementary OS' applications and services. &lt;strong&gt;You will encounter bugs and possibly untested software, so please DO NOT consider to run such an unstable system as a daily driver with important data on it&lt;/strong&gt;. To run the daily repository, you'll need to add &lt;code&gt;ppa:elementary-os/daily&lt;/code&gt; to your repositories and fully update your system (&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get dist-upgrade&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Do elementary developers, designers, or supporters have blogs I can read?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;There are very few people around the elementary OS team which are running a blog, and those are mostly unrelated to elementary OS itself. Sam Hewitt (a designer working on elementary OS) is running &lt;a href=&quot;http://snwh.org/blog/&quot;&gt;a blog&lt;/a&gt;, but as pointed out there is very few information about ongoing elementary OS development. I don't think there is anyone around who really blogs about recent elementary OS development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course there is the &lt;a href=&quot;http://blog.elementary.io/&quot;&gt;official blog&lt;/a&gt;. It's both posting about important events happening (big features coming, new shiny versions, etc) and answering common questions (which &lt;em&gt;are&lt;/em&gt; giving insight in decisions, bug fixes worked on, etc), but it's generally aimed at the normal users, so it's not very focused on ongoing development and technical speak.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally, there are a few blogs out there who either focus on elementary OS or are supporting it by occasional entries about it. &lt;strong&gt;But&lt;/strong&gt; these blogs are mostly following development on Launchpad and more often they are simply speculating about things without asking any team members before posting about it. Therefore, sometimes they're spreading misinformation and that's the reason I would not like to link them here.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Are there social media outlets that are actively being updated?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Beside the official blog I linked above, most information is on Google+. There is the &lt;a href=&quot;https://plus.google.com/u/0/114635553671833442612&quot;&gt;official Google+ page&lt;/a&gt; which posts frequent updates (although it's linking blog entries as well of course), but both &lt;a href=&quot;https://plus.google.com/+DanielFor%C3%A9&quot;&gt;Daniel Foré&lt;/a&gt; and &lt;a href=&quot;https://plus.google.com/u/0/+CassidyJames&quot;&gt;Cassidy James Blaede&lt;/a&gt; (which are basically the founding fathers of elementary) are posting about interesting stuff related to elementary OS (spiced up with personal opinion, of course). Last but not least, there is the &lt;a href=&quot;https://plus.google.com/u/0/communities/104613975513761463450&quot;&gt;official G+ community&lt;/a&gt; - developers occasionally post information about new elementary OS and third-party development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, elementary runs two Twitter Accounts, &lt;a href=&quot;https://twitter.com/elementary&quot;&gt;@elementary&lt;/a&gt; and &lt;a href=&quot;https://twitter.com/elementaryfixes&quot;&gt;@elementaryfixes&lt;/a&gt;. The later one is posting whenever a bug on Launchpad is fixed.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-16T16:51:48.140" LastActivityDate="2015-07-16T16:51:48.140" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="534" PostTypeId="1" AcceptedAnswerId="535" CreationDate="2015-07-16T17:00:11.040" Score="5" ViewCount="103" Body="&lt;p&gt;I just found out in settings that elementary OS has an option to add the rupee symbol as an additional symbol on the number four key as seen in the below screenshot, but how do I enter that symbol?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/D32WB.png&quot; alt=&quot;The rupee symbol four option in  the settings window &quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've restarted my computer after toggling the setting.&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="482" LastEditDate="2015-07-19T17:04:11.907" LastActivityDate="2015-07-19T17:04:11.907" Title="How do I enter the rupee sign?" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="535" PostTypeId="2" ParentId="534" CreationDate="2015-07-16T18:12:58.990" Score="6" Body="&lt;p&gt;When you have enabled that setting you can press &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;AltGr&lt;/kbd&gt;+&lt;kbd&gt;4&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to create a ₹ &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just tested it myself, you do not need to restart your computer or even exit the settings window. It just works. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I do agree that it is a bit assuming to just call the setting &quot;Rupee on 4&quot;. Although it is rather intuitive on a Scandinavian keyboard-layout like mine, it might not be on some kind of keyboards I guess. &lt;/p&gt;&#xA;" OwnerUserId="320" LastEditorUserId="68" LastEditDate="2015-07-16T20:41:13.227" LastActivityDate="2015-07-16T20:41:13.227" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="536" PostTypeId="1" CreationDate="2015-07-16T18:52:48.473" Score="12" ViewCount="6431" Body="&lt;p&gt;When I installed Freya on a 22&quot; Screen, everything was fine. But when I plug the PC in a 40&quot; TV, the desktop is upscaled to 200%. The screen resolution is correctly 1920x1080 but because of the upscaling it looks more like 960x540.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I rescale it with &lt;code&gt;xrandr --output DFP2 --scale 2x2&lt;/code&gt; the screen looks fine, but the mouse cursor is confined to the top left quarter of the screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="427" LastActivityDate="2015-07-17T18:39:19.250" Title="How to scale down the desktop?" Tags="|release-freya|desktop|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="537" PostTypeId="2" ParentId="271" CreationDate="2015-07-16T19:16:55.610" Score="4" Body="&lt;p&gt;You can change the keyboard layout in &lt;code&gt;System Settings &amp;gt; Keyboard &amp;gt; Layout&lt;/code&gt; and add a new layout there with the plus button in the bottom left. I have no knowledge of Japanese signs, but enabling a &lt;code&gt;Japanese (Kana)&lt;/code&gt; seemed to work for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The default shortcut to cycle through different keyboard layouts in Freya is &lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;Space&lt;/kbd&gt;. You can change this in &lt;code&gt;System Settings &amp;gt; Keyboard &amp;gt; Shortcuts &amp;gt; Universal Access&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there are some special settings for Japanese input(&lt;code&gt;Keyboard -&amp;gt; Options -&amp;gt; Japanese keyboard options&lt;/code&gt;). Check attached screenshot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/U1Zpc.png&quot; alt=&quot;Screenshot showing Japanese keyboard options in System Settings&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-18T14:27:30.837" LastActivityDate="2015-07-18T14:27:30.837" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="538" PostTypeId="2" ParentId="536" CreationDate="2015-07-16T19:49:52.467" Score="11" Body="&lt;h1&gt;dconf-editor&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;(Install dconf-editor by typing &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; in the command line.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open dconf-editor and navigate to &lt;code&gt;org.gnome.desktop.interface&lt;/code&gt; and check the value of &lt;code&gt;scaling-factor&lt;/code&gt;. It is probably set to &lt;code&gt;2&lt;/code&gt; (which is for high density displays) and you should change it to &lt;code&gt;1&lt;/code&gt;. For now, non-integer values will not work.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-17T00:27:21.827" LastActivityDate="2015-07-17T00:27:21.827" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="539" PostTypeId="1" CreationDate="2015-07-17T04:57:28.353" Score="10" ViewCount="1114" Body="&lt;ol&gt;&#xA;&lt;li&gt;How can I set geometry for applications by console command?&lt;/li&gt;&#xA;&lt;li&gt;How can I remove borders (title, close minimie maximize buttons) from application by console command?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For example, I want to start a windows in virtualbox and make a screencast. I want to set a precise position of virtualbox window and same precise position in screencast application.&lt;/p&gt;&#xA;" OwnerUserId="431" LastEditorUserId="45" LastEditDate="2015-07-24T01:46:04.647" LastActivityDate="2015-07-24T01:46:04.647" Title="Can I set an app window's width, height, and position from Terminal?" Tags="|window-management|window-decoration|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="541" PostTypeId="2" ParentId="536" CreationDate="2015-07-17T14:05:44.423" Score="5" Body="&lt;h2&gt;Terminal&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To solve your problem without installing extra software:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;to get your scaling factor&lt;br&gt;&#xA;&lt;code&gt;gsettings get org.gnome.desktop.interface scaling-factor&lt;/code&gt;   &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;to set your scaling factor&lt;br&gt;&#xA;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 1&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="158" LastEditorUserId="45" LastEditDate="2015-07-17T18:39:19.250" LastActivityDate="2015-07-17T18:39:19.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="543" PostTypeId="1" CreationDate="2015-07-17T17:43:59.577" Score="1" ViewCount="264" Body="&lt;p&gt;A couple of weeks ago the last.fm plug-in stopped working for me, I reported the bug here &lt;a href=&quot;https://bugs.launchpad.net/noise/+bug/1474470&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, however I really miss scrobbing my songs! Could anyone please help me fix this?, I have no idea where to start.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (noise:3152): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-LILgC2mGlt: Connection refused&#xA;[_LOG_LEVEL_INFO 19:39:45.687148] Application.vala:155: Music version: 0.3.1&#xA;[_LOG_LEVEL_INFO 19:39:45.687209] Application.vala:157: Kernel version: 3.16.0-43-generic&#xA;[_LOG_LEVEL_FATAL 19:39:45.983791] [GLib-GObject] Read-only property 'read-only-view' on class 'GeeReadOnlyBidirSortedSet' has type 'GeeSortedSet' which is not equal to or more restrictive than the type 'GeeBidirSortedSet' of the property on the interface 'GeeBidirSortedSet'&#xA;[_LOG_LEVEL_FATAL 19:39:45.983831] Music will not function properly.&#xA;[_LOG_LEVEL_WARN 19:39:46.109681] [libpeas] lastfm: /usr/lib/x86_64-linux-gnu/noise/plugins/LastFM/liblastfm.so: undefined symbol: gtk_label_set_xalign&#xA;[_LOG_LEVEL_WARN 19:39:46.109825] [libpeas] Error loading plugin 'lastfm'&#xA;[_LOG_LEVEL_INFO 19:39:46.110292] AudioPlayer.vala:28: Activating AudioPlayer Device plugin&#xA;[_LOG_LEVEL_INFO 19:39:46.110519] Plugin.vala:43: Activating MPRIS plugin&#xA;[_LOG_LEVEL_INFO 19:39:46.110652] CDRom.vala:28: Activating CD-Rom Device plugin&#xA;[_LOG_LEVEL_INFO 19:39:46.110782] iPod.vala:28: Activating iPod Device plugin~&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="436" LastActivityDate="2015-07-24T05:58:55.987" Title="Last.fm plugin stopped working in Noise" Tags="|music|" AnswerCount="0" CommentCount="6" ClosedDate="2015-07-24T05:59:07.433" ContentLicense="CC BY-SA 3.0" />
  <row Id="544" PostTypeId="2" ParentId="288" CreationDate="2015-07-17T17:47:03.453" Score="4" Body="&lt;p&gt;Since the problem persists even on another new account it doesn't like it's a problem with an auto-start or visibility, it's something global, which I would bet on a package corruption...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wrote a general troubleshooting post, just in case anyone else stumbles upon it with a slightly different problem. However, please follow all the steps to make sure. if it doesn't help - post us with results from each step.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;First of all, lets check if nm-applet is in place in your system and it can be actually launched.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;check if nm-applet is in-place:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ps aux | grep nm-applet&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it's in place it's only a problem of visibility, check step 4. If it's missing - check step 2.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;check binary and package presence:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ls -la `which nm-applet`&#xA;# dpkg -V network-manager-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it's missing or any problems with package - reinstall &lt;code&gt;network-manager-gnome&lt;/code&gt; package. If everything is ok - move on to the next step.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If everything is in place - try to start it manually by running following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# nm-applet&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it keeps running and does not exit, and icon appears - it means its an auto startup problem. go to step 5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it keeps running without icon appearing - move on to the next step. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it exits right away - troubleshoot the exit errors. You can even try to strace as binary doesn't have many debug options:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# strace -vtfs1024 -o /tmp/nm-applet-startup.strace.log nm-applet&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you've reached this place - it means your nm-applet can start just fine but you don't see the icon. probably issue is the visibility. Check it by calling gsettings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings get org.gnome.nm-applet show-applet&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it returns false - bingo. That's the problem. Now call gsettings again to enable its visibility:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# gsettings set org.gnome.nm-applet show-applet true&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you've reached this place it probably means your nm-applet works fine but does not start automatically. we can fix that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open settings, locate Applications and Startup. Add &quot;nm-applet&quot; over there. I know in luna it can be different a bit but you've got to figure it out, I don't have Luna :) Should look somehow like on a screenshot below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y5A2z.png&quot; alt=&quot;nm-applet autostart manual configuration&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="386" LastEditorUserId="386" LastEditDate="2015-07-17T17:56:27.580" LastActivityDate="2015-07-17T17:56:27.580" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="545" PostTypeId="1" CreationDate="2015-07-17T18:51:15.167" Score="2" ViewCount="769" Body="&lt;p&gt;elementary OS installer does find my SSD (&quot;install alongside another OS&quot;), but I can only install to HDD.&#xA;Windows isn't installed to HDD, Microsoft is located in C:\Windows (SSD).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uFWjx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm now shrinking, but I get an error. Am I doing everything right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zqry4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uWRGm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="440" LastEditorUserId="440" LastEditDate="2015-07-17T20:17:56.327" LastActivityDate="2015-09-16T07:46:36.393" Title="Can't install elementary OS to SSD" Tags="|system-installation|" AnswerCount="1" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="547" PostTypeId="2" ParentId="539" CreationDate="2015-07-17T19:12:07.697" Score="6" Body="&lt;h1&gt;Using wmctrl&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The program wmctrl allows to you to get infos and change the states of currently open windows. Install it by typing &lt;code&gt;sudo apt-get install wmctrl&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type &lt;code&gt;wmctrl -l&lt;/code&gt; to output a list of currently managed windows: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0x02e00003 -1 username plank&#xA;0x02a00003 -1 username wingpanel&#xA;0x0340000a  0 username Home: wmctrl&#xA;0x0360000a  0 username Scratch&#xA;0x03403972  0 username Home: wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can resize and move the window with &lt;code&gt;wmctrl -r &amp;lt;Window&amp;gt; -e &amp;lt;G&amp;gt;,&amp;lt;X&amp;gt;,&amp;lt;Y&amp;gt;,&amp;lt;W&amp;gt;,&amp;lt;H&amp;gt;&lt;/code&gt;, for example &lt;code&gt;wmctrl -r Scratch -e 0,10,200,600,400&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&amp;lt;X&amp;gt;&lt;/code&gt;, &lt;code&gt;&amp;lt;Y&amp;gt;&lt;/code&gt;, &lt;code&gt;&amp;lt;W&amp;gt;&lt;/code&gt;, &lt;code&gt;&amp;lt;H&amp;gt;&lt;/code&gt; can also be set to &lt;code&gt;-1&lt;/code&gt; so the respective value stays the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there are multiple windows with the same name, use the -i switch and input the window id instead of the title. This example will only change the dimensions of the second window called &quot;Home: wmctrl&quot; (a Terminal) &lt;code&gt;wmctrl -i -r 0x03403972 -e 0,10,20,-1,-1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or change the state with &lt;code&gt;wmctrol -r &amp;lt;Window&amp;gt; -b &amp;lt;State&amp;gt;&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To learn about all options, type &lt;code&gt;wmctrl --help&lt;/code&gt; or &lt;a href=&quot;http://manpages.ubuntu.com/manpages/trusty/en/man1/wmctrl.1.html&quot;&gt;&lt;code&gt;man wmctrl&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Saved state in gsettings&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Most apps save the last position of their window in gsettings, unfortunately quite inconsistently. Some examples for elementary apps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Audience: No saved state.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Calculator: No saved state.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Files&lt;/strong&gt; &lt;code&gt;org.pantheon.files.preferences&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;maximized&lt;/code&gt; (boolean), &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt; (no x and y position)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Photos&lt;/strong&gt; &lt;code&gt;org.pantheon.foto.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt; (no x and y position)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Calendar (Maya)&lt;/strong&gt; &lt;code&gt;org.pantheon.maya.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt; (no x and y position)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Geary Mail&lt;/strong&gt; &lt;code&gt;org.yorba.geary&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt; (no x and y position)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Music (Noise)&lt;/strong&gt; &lt;code&gt;org.pantheon.noise.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt; (no x and y position)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Scratch&lt;/strong&gt; &lt;code&gt;org.pantheon.scratch.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt;, &lt;code&gt;window-x&lt;/code&gt;, &lt;code&gt;window-y&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Sytem Settings (Switchboard)&lt;/strong&gt; &lt;code&gt;org.pantheon.switchboard.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;position&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Terminal&lt;/strong&gt; &lt;code&gt;org.pantheon.terminal.saved-state&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;window-state&lt;/code&gt;, &lt;code&gt;opening-x&lt;/code&gt;, &lt;code&gt;opening-y&lt;/code&gt;, &lt;code&gt;window-height&lt;/code&gt;, &lt;code&gt;window-width&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You can get the current value of a key by typing the following in your Terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.pantheon.files.preferences window-height&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change the value by typing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.files.preferences window-height 400&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-17T19:22:19.193" LastActivityDate="2015-07-17T19:22:19.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="548" PostTypeId="2" ParentId="545" CreationDate="2015-07-17T19:36:16.293" Score="1" Body="&lt;p&gt;@Dolphin, thanks for the follow-up with a screenshot. Yep I can see there are only 2 partitions present, definitely not 4 :) But what about free space? As I can see from your screenshot your disk C is completely used up, there is no free space to create new partitions that is why I suspect it doesn't show up SSD disk in partitioning - there is no free space to create a new partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to downsize disk C if that's possible. You can use some tools like Paragon partition magic, not sure what soft is the best pick nowadays, haven't used this for a while...&lt;/p&gt;&#xA;" OwnerUserId="386" LastEditorUserId="386" LastEditDate="2015-07-17T19:37:23.790" LastActivityDate="2015-07-17T19:37:23.790" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="551" PostTypeId="1" CreationDate="2015-07-18T00:02:18.020" Score="1" ViewCount="4529" Body="&lt;p&gt;When I restart the machine and select to boot from the new USB, created with &lt;a href=&quot;http://rufus.akeo.ie/&quot; rel=&quot;nofollow&quot;&gt;Rufus&lt;/a&gt;, it does nothing. It only displays &quot;Verifying DMI Pool Data .....&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The machine is an old Acer Aspire with an AMD processor and 2GB RAM.&lt;/p&gt;&#xA;" OwnerUserId="450" LastEditorUserId="45" LastEditDate="2015-07-19T16:59:56.480" LastActivityDate="2015-07-20T09:19:15.020" Title="elementary OS not booting from USB" Tags="|system-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="552" PostTypeId="2" ParentId="378" CreationDate="2015-07-18T00:54:43.137" Score="4" Body="&lt;p&gt;When launching Chromium web apps you can pass the flag &lt;code&gt;--force-device-scale-factor=2&lt;/code&gt; to get properly scaled content on HiDPI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideally you should add it to the respective &lt;code&gt;.desktop&lt;/code&gt; file of the app so that you can have the launcher in the dock or start it via Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat  ~/.local/share/applicationschrome-f*-Default.desktop&#xA;&#xA;#!/usr/bin/env xdg-open&#xA;[Desktop Entry]&#xA;Version=1.0&#xA;Terminal=false&#xA;Type=Application&#xA;Name=Postman&#xA;Exec=/usr/bin/chromium-browser --force-device-scale-factor=2 --profile-directory=Default --app-id=fhbjgbiflinjbdggehcddcbncdddomop&#xA;Icon=chrome-fhbjgbiflinjbdggehcddcbncdddomop-Default&#xA;StartupWMClass=crx_fhbjgbiflinjbdggehcddcbncdddomop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="81" LastActivityDate="2015-07-18T00:54:43.137" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="553" PostTypeId="2" ParentId="356" CreationDate="2015-07-18T04:56:23.500" Score="8" Body="&lt;p&gt;I'm going to answer with &quot;No&quot;, as in I can't think of any good reason you shouldn't be able to use Nautilus or Nemo or any other file manager that you'd like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I think you would lose by using Nautilus is that it doesn't use our Contractor API. So apps that install Contractor extensions (also known as contracts) won't be able to expose those extensions to Nautilus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be aware that some apps may try to make themselves the default upon installation. You can configure your default apps in System Settings &gt; Applications&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-18T04:56:23.500" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="554" PostTypeId="1" CreationDate="2015-07-18T05:04:42.530" Score="3" ViewCount="368" Body="&lt;h1&gt;Problem&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/sKHj5.jpg&quot; alt=&quot;Wrong Shadow&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Almost every window from the core elementary os applications displays a wrong shadow (you can see exactly how &lt;em&gt;wrong&lt;/em&gt; in the picture above). If I boot using software rendering (boot on secure mode and resume boot normally) the shadow works okay, but as it is software, everything is slowed to an unusable state.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Affected apps&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Applications that are affected by this include (but are not limited to): &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;terminal&lt;/li&gt;&#xA;&lt;li&gt;geary&lt;/li&gt;&#xA;&lt;li&gt;files&lt;/li&gt;&#xA;&lt;li&gt;midori&lt;/li&gt;&#xA;&lt;li&gt;camera&lt;/li&gt;&#xA;&lt;li&gt;music&lt;/li&gt;&#xA;&lt;li&gt;maya&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Applications that are &lt;strong&gt;not&lt;/strong&gt; affected by this include:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;firefox&lt;/li&gt;&#xA;&lt;li&gt;gvim&lt;/li&gt;&#xA;&lt;li&gt;atom&lt;/li&gt;&#xA;&lt;li&gt;audacity&lt;/li&gt;&#xA;&lt;li&gt;google chrome&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h1&gt;GTK3?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;E.g: it appears to happen only with GTK3 applications and not with GTK2 ones.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;I tried:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;I already tried doing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then rebooting, but so far nothing changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the solution mentioned &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1412073&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, but the result was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-video-intel=2:2.99.910-0ubuntu1.3+elementary2+r3~ubuntu0.3.1&#xA;E: Version '2:2.99.910-0ubuntu1.3+elementary2+r3~ubuntu0.3.1' for 'xserver-xorg-video-intel' was not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="452" LastActivityDate="2015-07-18T08:30:36.350" Title="Black shadow under windows" Tags="|release-freya|graphic-drivers|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="558" PostTypeId="2" ParentId="554" CreationDate="2015-07-18T08:30:36.350" Score="3" Body="&lt;p&gt;I tried the solution proposed on the comments:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-video-intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it didn't work because I had &lt;code&gt;xserver-xorg-video-intel-lts-utopic&lt;/code&gt; installed, which causes a conflict.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve this, I used aptitude to install it (&lt;code&gt;xserver-xorg-video-intel&lt;/code&gt;) and remove the conflicting packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo aptitude install xserver-xorg-video-intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But then aptitude removed some core packages, mainly &lt;code&gt;elementary-desktop&lt;/code&gt;, because they depended upon the &lt;code&gt;-lts-utopic&lt;/code&gt; version of the &lt;code&gt;xserver-xorg-video-intel&lt;/code&gt; package. To solve this issue, I added the stable elementary ppa with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and reinstalled the &lt;code&gt;elementary-desktop&lt;/code&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after a reboot the shadows are working again!&lt;/p&gt;&#xA;" OwnerUserId="452" LastActivityDate="2015-07-18T08:30:36.350" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="559" PostTypeId="2" ParentId="368" CreationDate="2015-07-18T09:42:35.863" Score="11" Body="&lt;p&gt;You can launch the shutdown menu with the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --session --print-reply --dest=com.canonical.Unity /org/gnome/SessionManager/EndSessionDialog org.gnome.SessionManager.EndSessionDialog.Open uint32:2 uint32:0 uint32:0 array:objpath:[]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastEditorUserId="3757" LastEditDate="2016-04-25T02:00:22.763" LastActivityDate="2016-04-25T02:00:22.763" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="560" PostTypeId="1" CreationDate="2015-07-18T09:50:38.227" Score="22" ViewCount="27386" Body="&lt;p&gt;I downloaded &lt;a href=&quot;https://en.wikipedia.org/wiki/Aptana#Aptana_Studio&quot;&gt;Aptana Studio&lt;/a&gt; which is not &quot;installed&quot; but can be launched directly from the downloaded executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to add a shortcut to the applications menu or in the dock. Drag &amp;amp; Drop to the dock does not work.&lt;/p&gt;&#xA;" OwnerUserId="453" LastEditorUserId="45" LastEditDate="2015-07-19T17:04:24.763" LastActivityDate="2020-03-12T04:09:09.917" Title="How can I add an executable file to the dock?" Tags="|plank|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="561" PostTypeId="2" ParentId="560" CreationDate="2015-07-18T10:06:43.353" Score="19" Body="&lt;p&gt;You can create an application shortcut for Slingshot (the applications menu) manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should be placed in &lt;code&gt;/usr/share/applications/&amp;lt;APPNAME&amp;gt;.desktop&lt;/code&gt;. Below is the way Skype's .desktop file looks. Copy the contents, replace with the data that will suit your application, and it should appear in the menu:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /usr/share/applications/skype.desktop&#xA;[Desktop Entry]&#xA;Name=Skype&#xA;Comment=Skype Internet Telephony&#xA;Exec=env PULSE_LATENCY_MSEC=60 skype %U&#xA;Icon=skype.png&#xA;Terminal=false&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Categories=Network;Application;&#xA;MimeType=x-scheme-handler/skype;&#xA;X-KDE-Protocols=skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once it is in the menu, you'll be able to pin it to the dock&lt;/p&gt;&#xA;" OwnerUserId="386" LastEditorUserId="45" LastEditDate="2015-07-19T17:06:29.747" LastActivityDate="2015-07-19T17:06:29.747" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="563" PostTypeId="2" ParentId="560" CreationDate="2015-07-18T12:47:34.227" Score="10" Body="&lt;p&gt;Create an application desktop-entry at &lt;code&gt;/usr/share/applications/&lt;/code&gt; with the name &lt;code&gt;app-name.desktop&lt;/code&gt; with the following basic details:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=App Name&#xA;Exec=/dir/path/app/binary&#xA;Terminal=false&#xA;Icon=/icon/path/icon.png&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can add entries like &lt;code&gt;MimeType&lt;/code&gt; (&lt;a href=&quot;http://www.sitepoint.com/web-foundations/mime-types-complete-list/&quot; rel=&quot;noreferrer&quot;&gt;complete-list&lt;/a&gt;) and &lt;code&gt;Encoding&lt;/code&gt; (eg: &lt;code&gt;UTF-8&lt;/code&gt;) optionally. For the app category (eg: &lt;code&gt;Categories:Network;WebBrowser;IDE&lt;/code&gt;) check the short list below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;AudioVideo, Audio, Video, Development, Education, Game, Graphics, Network, Office, Science, Settings, System, Utility&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;edit&lt;/strong&gt;: If you need to get administrator privileges explicitly (with sudo), install &lt;code&gt;gksu&lt;/code&gt; and then use &lt;code&gt;gksudo&lt;/code&gt; at exec.&lt;/p&gt;&#xA;" OwnerUserId="455" LastEditorUserId="455" LastEditDate="2015-07-21T10:30:14.593" LastActivityDate="2015-07-21T10:30:14.593" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="564" PostTypeId="1" CreationDate="2015-07-18T14:13:00.270" Score="1" ViewCount="2059" Body="&lt;p&gt;Using a fresh install of elementary OS Freya&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Synaptic and expected it to show up in the applications menu. It is not there. I am able to start Synaptic by typing the name in the search bar at the top of the icons. I can't find a way to display a full list of all my installed apps (including Synaptic).&lt;/p&gt;&#xA;" OwnerUserId="458" LastEditorUserId="45" LastEditDate="2015-07-18T16:39:15.390" LastActivityDate="2015-07-18T20:48:27.007" Title="Synaptic package manager not showing in applications menu" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="565" PostTypeId="1" AcceptedAnswerId="9424" CreationDate="2015-07-18T16:18:39.963" Score="8" ViewCount="1601" Body="&lt;p&gt;I'm trying to change the icon of the &quot;stack&quot; (folders) in the dock (Plank). I made a folder in Home and put on the links that I wanted on. Then, I dragged that folder to Plank. This makes a shortcut to the selected folder on Plank. My question is: How I can change that icon?&lt;/p&gt;&#xA;" OwnerUserId="462" LastEditorDisplayName="user170" LastEditDate="2016-11-27T22:57:42.473" LastActivityDate="2018-03-11T14:17:50.350" Title="How can I change the &quot;stack&quot; (folder) icon in the dock?" Tags="|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="566" PostTypeId="2" ParentId="565" CreationDate="2015-07-18T16:52:53.130" Score="6" Body="&lt;p&gt;It's not possible to change. This is currently drawn by cairo code in Plank. It is not an external asset and it can't be styled with Gtk.CSS&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-18T16:52:53.130" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="568" PostTypeId="2" ParentId="564" CreationDate="2015-07-18T20:48:27.007" Score="2" Body="&lt;p&gt;I installed Synaptic too and it shows up as &lt;em&gt;Synaptic Package Manager&lt;/em&gt; in Slingshot (under &lt;em&gt;System Tools&lt;/em&gt; if you use category view). By default it uses quite an ugly icon, this is how it looks like for me (with an &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;extended icon pack&lt;/a&gt; and unstable WingPanel):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TPJeC.jpg&quot; alt=&quot;Synaptic in Slingshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One idea would be to check the &lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;synaptic.desktop&lt;/code&gt;&lt;/a&gt; file in &lt;code&gt;/usr/share/applications/&lt;/code&gt;. It should look something like this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Synaptic Package Manager&#xA;GenericName=Package Manager&#xA;Comment=Install, remove and upgrade software packages&#xA;Exec=synaptic-pkexec&#xA;Icon=synaptic&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=PackageManager;GTK;System;Settings;&#xA;NotShowIn=KDE;&#xA;X-Ubuntu-Gettext-Domain=synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Quite important are the entries &lt;code&gt;NotShowIn&lt;/code&gt; (should &lt;strong&gt;not&lt;/strong&gt; contain &lt;code&gt;Pantheon&lt;/code&gt;) and &lt;code&gt;OnlyShowIn&lt;/code&gt; (&lt;strong&gt;if&lt;/strong&gt; it's there, make sure it &lt;strong&gt;does&lt;/strong&gt; contain &lt;code&gt;Pantheon&lt;/code&gt;). There should not be an entry called &lt;code&gt;NoDisplay&lt;/code&gt;. &lt;a href=&quot;http://standards.freedesktop.org/desktop-entry-spec/latest/ar01s05.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;(Learn more about recognized desktop entry keys.)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is no such file first try to reinstall synaptic &lt;code&gt;sudo apt-get install --reinstall synaptic&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that does not work, use Scratch to create a new file called &lt;code&gt;synaptic.desktop&lt;/code&gt; inside &lt;code&gt;~/.local/share/applications/&lt;/code&gt; with the contents I have posted above. &lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-07-18T20:48:27.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="570" PostTypeId="1" AcceptedAnswerId="597" CreationDate="2015-07-18T23:42:20.967" Score="3" ViewCount="649" Body="&lt;p&gt;I have a server I connect to using ssh in pantheon-files, how do I make the network file system remain mounted after reboot?&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="190" LastEditDate="2015-07-20T21:16:15.957" LastActivityDate="2023-06-26T00:26:49.037" Title="How do I mount a network filesystem on boot?" Tags="|startup|mount|pantheon-files|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="571" PostTypeId="1" CreationDate="2015-07-19T02:40:24.313" Score="10" ViewCount="6660" Body="&lt;p&gt;I rebooted and now when I log in, nothing but the wallpaper shows up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't recall doing anything but installing &lt;a href=&quot;https://vivaldi.com/&quot; rel=&quot;noreferrer&quot;&gt;Vivaldi&lt;/a&gt; lately, but I don't think that's it, so I don't know where to start.&lt;/p&gt;&#xA;" OwnerUserId="468" LastEditorUserId="45" LastEditDate="2015-07-19T16:28:54.527" LastActivityDate="2015-07-26T08:42:25.850" Title="Nothing but wallpaper shows up after login" Tags="|release-freya|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="572" PostTypeId="1" CreationDate="2015-07-19T05:28:50.700" Score="3" ViewCount="638" Body="&lt;p&gt;I installed Freya 64-Bit on a Dell Latitude E6420. Everything seems to be working fine except for Brasero. Below is what I get if I try to run it via Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(brasero:10373): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-4ejj8DFSiS: Connection refused&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_set_size_request: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_height_for_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_set_size_request: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: gtk_widget_get_preferred_width: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;(brasero:10373): Gtk-CRITICAL **: _gtk_widget_get_preferred_size_and_baseline: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="470" LastEditorUserId="45" LastEditDate="2015-07-24T01:47:33.340" LastActivityDate="2015-07-24T21:27:42.440" Title="How can I get Brasero to work?" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="573" PostTypeId="1" CreationDate="2015-07-19T05:37:51.977" Score="10" ViewCount="1904" Body="&lt;p&gt;I'm a student at &lt;a href=&quot;https://en.wikipedia.org/wiki/University_of_Wyoming&quot; rel=&quot;noreferrer&quot;&gt;University of Wyoming&lt;/a&gt; (UWyo), USA, studying the source (and difference in source) for Linux packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm interested in what elementary OS's source list looks like. Specifically, I can usually pull enough information from:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cat /var/lib/apt/lists/* | grep Vcs-Git | awk '{print $2}' &amp;gt; ~/apt-sources&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm curious if elementary has any unique locations for where its source is maintained (other than it and the contributor's &lt;a href=&quot;http://en.wikipedia.org/wiki/GitHub&quot; rel=&quot;noreferrer&quot;&gt;GitHub&lt;/a&gt; accounts?), and if it's plausible for UWyo's computer science department to download it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And, while I'm at it, has anyone ever tried to do this for .rpm?&lt;/p&gt;&#xA;" OwnerDisplayName="user469" LastEditorUserId="45" LastEditDate="2015-07-19T21:40:08.620" LastActivityDate="2015-07-20T21:05:52.987" Title="Where can I find elementary's source code... for science?" Tags="|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="574" PostTypeId="1" AcceptedAnswerId="575" CreationDate="2015-07-19T06:19:15.313" Score="1" ViewCount="296" Body="&lt;p&gt;I have Freya alongside with Windows 8 on UEFI mode. Recently I installed bumblebee on my Freya, But when I want to run &lt;code&gt;optirun&lt;/code&gt; command it says :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;module 'nvidia' is not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also read this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28/installing-bumblebee-on-freya&quot;&gt;answer&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="472" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-19T06:23:48.357" Title="Bumblebee - Module nvidia is not found" Tags="|release-freya|bumblebee|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="575" PostTypeId="2" ParentId="574" CreationDate="2015-07-19T06:23:17.193" Score="1" Body="&lt;p&gt;The problem is secure boot, it didn't allow bumblebee to install nvidia.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Try to uninstall bumblebee&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge ppa:bumblebee/stable&#xA;sudo apt-get purge bumblebee&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Turn of secure boot from your bios setting&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install bumblebee agian and it will work properly&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="47" LastActivityDate="2015-07-19T06:23:17.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="576" PostTypeId="2" ParentId="573" CreationDate="2015-07-19T08:54:02.863" Score="13" Body="&lt;p&gt;The source code of components the elementary team is maintaining is not hosted via &lt;code&gt;git&lt;/code&gt; (neither GitHub nor any other git server), it's hosted on &lt;a href=&quot;https://code.launchpad.net/elementary&quot;&gt;Launchpad&lt;/a&gt; which is using &lt;code&gt;bzr&lt;/code&gt; (bazaar). As you can see, following the link, all of the source code elementary is maintaining is open to the public and available under some version of the GNU General Public License. Therefore you're allowed to download and redistribute the code (and build binaries from this code), as long as you're following the restrictions of the corresponding license.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're interested in the code of a certain elementary OS component (as the link above is pretty cluttered), you can follow the links &lt;a href=&quot;https://launchpad.net/elementary&quot;&gt;here&lt;/a&gt; to the separate projects. Most of elementary OS' projects have &lt;code&gt;.tgz&lt;/code&gt; files available in the sidebar on the right (titled &quot;Downloads&quot;). These are the latest stable release tarballs. If you're more interested in pulling code via &lt;code&gt;bzr&lt;/code&gt;, you should take a look at the code page (for example &lt;a href=&quot;https://code.launchpad.net/pantheon-terminal&quot;&gt;Pantheon Terminal&lt;/a&gt;) - There is a code branch which is part of the &lt;em&gt;Freya&lt;/em&gt; series. That branch contains the stable releases for the corresponding project. &lt;strong&gt;You don't want to pull from &lt;em&gt;trunk&lt;/em&gt;, because that's the branch containing active development - Which might be unstable and/or untested.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-20T21:05:52.987" LastActivityDate="2015-07-20T21:05:52.987" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="577" PostTypeId="1" CreationDate="2015-07-19T09:13:56.403" Score="15" ViewCount="1537" Body="&lt;p&gt;I installed a weather applet and a system monitoring applet yesterday, and I was wondering if it was possible to change the order of the icons on Wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I.e. I would like to place the weather applet between the system-monitoring applet and the language icon on the picture below. Is there an easy way to do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WIXhs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="473" LastEditorUserId="37" LastEditDate="2016-09-27T08:44:39.893" LastActivityDate="2018-06-11T09:26:18.817" Title="How can I change the order of icons in Wingpanel?" Tags="|release-freya|wingpanel|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="578" PostTypeId="1" CreationDate="2015-07-19T10:03:17.217" Score="2" ViewCount="1552" Body="&lt;p&gt;I am currently trying out different themes. I love the elementary OS's, default icons on the top bar and I was wondering how to keep themes from changing it to their own bulkier and uglier versions. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="877" LastActivityDate="2015-07-19T16:43:01.287" Title="How to keep default icons from changing in top panel" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="580" PostTypeId="2" ParentId="577" CreationDate="2015-07-19T11:01:06.897" Score="7" Body="&lt;p&gt;I'm pretty sure it is not possible without rewriting Wingpanel.&lt;br&gt;&#xA;You can propose your wish at the &lt;a href=&quot;https://bugs.launchpad.net/wingpanel&quot;&gt;Wingpanel bugtracker&lt;/a&gt;, and if the developers like your idea, they may consider implementing it in the future.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-07-19T11:37:14.283" LastActivityDate="2015-07-19T11:37:14.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="582" PostTypeId="2" ParentId="578" CreationDate="2015-07-19T11:46:02.860" Score="4" Body="&lt;p&gt;It depends on the theme you're going to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the theme contains indicator icons, you can check that in the status/panel folder in the directory where you installed the theme (&lt;code&gt;/usr/share/icons/&lt;/code&gt; or &lt;code&gt;~/.local/share/icons&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the theme does not contain any status/panel icons, open the &lt;code&gt;index.theme&lt;/code&gt; using your default text editor and in the line &lt;code&gt;Inherits=anotherthemename&lt;/code&gt; replace &lt;code&gt;anotherthemename&lt;/code&gt; with &lt;code&gt;elementary&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the theme does have status/panel icons, you can delete those folders for all sizes and don't forget to remove the entries from &lt;code&gt;index.theme&lt;/code&gt; too. If you have a theme like that &lt;code&gt;Directories=dir1, dir2&lt;/code&gt; and you want to remove &lt;code&gt;dir2&lt;/code&gt; you should look for something like &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[dir2/16]&#xA;Size=*&#xA;Context=*&#xA;MinSize=*&#xA;MaxSize=*&#xA;Type=*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for all the sizes and remove them. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last step is updating icon theme cache &lt;code&gt;sudo gtk-update-icon-cache -f /usr/share/icons/iconthemefolder&lt;/code&gt; and change &lt;code&gt;iconthemefolder&lt;/code&gt; with the folder name of theme you want to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please create a backup of the theme before doing any modifications.&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorUserId="68" LastEditDate="2015-07-19T16:43:01.287" LastActivityDate="2015-07-19T16:43:01.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="583" PostTypeId="2" ParentId="572" CreationDate="2015-07-19T12:45:38.533" Score="5" Body="&lt;p&gt;You can install a newer version of Brasero from the GNOME3 Staging PPA. It works fine without errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a terminal, type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:gnome3-team/gnome3-staging&#xA;sudo apt-get update&#xA;sudo apt-get install brasero&#xA;sudo add-apt-repository --remove ppa:gnome3-team/gnome3-staging&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please note that you won't be able to receive any new updates to Brasero after you install it. Also, doing an upgrade between these commands is not recommended and could lead to serious problems with your system (and possibly even break it).&lt;/p&gt;&#xA;" OwnerDisplayName="user479" LastEditorUserId="138" LastEditDate="2015-07-24T21:27:42.440" LastActivityDate="2015-07-24T21:27:42.440" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="584" PostTypeId="2" ParentId="571" CreationDate="2015-07-19T12:50:20.783" Score="4" Body="&lt;p&gt;I just tried installing Vivaldi and had unmet dependencies, so maybe it is the cause of problems after all? &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Use command line&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Depending on where you are, you should be able to get to a terminal (called tty2 in this case) by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;F2&lt;/kbd&gt; or just &lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;F2&lt;/kbd&gt;. Login with your username and password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove Vivaldi type &lt;code&gt;sudo apt-get remove vivaldi-preview&lt;/code&gt;. Then reboot with &lt;code&gt;sudo shutdown -r now&lt;/code&gt; and check if it works now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As there is not much else known, you can also take a look in the log files by typing &lt;code&gt;dmesg -l emerg,alert,crit,err | less&lt;/code&gt; and post the output here. (There are also quite a lot of log files in &lt;code&gt;/var/log/&lt;/code&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Live system&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;If there is no way to access the command line from your installed system an alternative is to use a live system, which will allow you to view, modify and delete the files on your harddrive. And also to make a backup of important data (especially &lt;code&gt;/home/&lt;/code&gt;) before trying anything dangerous. &lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-19T12:58:01.820" LastActivityDate="2015-07-19T12:58:01.820" CommentCount="0" CommunityOwnedDate="2015-07-19T12:58:01.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="586" PostTypeId="1" AcceptedAnswerId="591" CreationDate="2015-07-19T17:29:28.133" Score="9" ViewCount="4589" Body="&lt;p&gt;When locked, my laptop (Ideapad Y510P, with proprietary Nvidia drivers installed) screen just turns off. The laptop is still on, but I cannot access the lock screen to unlock. The only thing I can do is push the power button, which will shutdown the system. I cannot access a tty, and is unresponsive. My GPU is a GT750M. Is there any way I can fix this?&lt;/p&gt;&#xA;" OwnerUserId="299" LastEditorUserId="45" LastEditDate="2015-08-01T00:48:04.370" LastActivityDate="2020-05-04T19:00:12.990" Title="Once locked, screen stays black and cannot be unlocked" Tags="|release-freya|settings|greeter|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="587" PostTypeId="2" ParentId="271" CreationDate="2015-07-19T17:49:57.637" Score="8" Body="&lt;p&gt;I found that ibus did not work with Freya. Instead I used fcitx with mozc for Japanese Input, using the instructions from the &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/33cfha/multiple_inputs_under_freya_chinese_case_pinyin/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary os subreddit&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: Make sure you remove the &lt;code&gt;ibus&lt;/code&gt; package before you go through the folliwng steps, else the input-switcher will not work.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Add the Fcitx repository:&#xA;&lt;code&gt;sudo add-apt-repository ppa:fcitx-team/nightly&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Update package list: &lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install fcitx, fcitx-mozc, and im-config: &lt;code&gt;sudo apt-get install fcitx fcitx-mozc im-config&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Configure input method by running: &lt;code&gt;im-config&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;OK&quot;, on the dialog box that pops up.&lt;/li&gt;&#xA;&lt;li&gt;When asked to update user preferences, select &quot;Yes&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select fcitx from the list, and select &quot;OK&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Restart your computer, and you should see an icon for fcitx in the wingpanel.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/Lf5YG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;NOTE: For newer versions of elementary OS like Juno and Hera, you probably won't see the fcitx icon in the wingpanel at this point. These instructions fixed that issue for me under Hera: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/16503&quot;&gt;https://elementaryos.stackexchange.com/a/16503&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;9&quot;&gt;&#xA;&lt;li&gt;Click on the icon and if Mozc is not already under the Input Methods, click on configure. Click on the Plus icon at the toolbar at the bottom. Uncheck the checkbox for &quot;Only Show Current Language&quot;. Search Mozc, and add it.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Ctrl+Space&lt;/code&gt; is used to switch between inputs.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/9K9XA.png&quot; alt=&quot;Input Selector&quot;&gt;&lt;/li&gt;&#xA;&lt;li&gt;Since the mozc configuration tool will not open from the indicator, you can use the following command to open it. &lt;code&gt;/usr/lib/mozc/mozc_tool --mode=config_dialog&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;If everything went well, you may have noticed that the icon for mozc by default is too big, so wingpanel will resize everytime you input with mozc. To avoid this, you can replace the icon with this smaller one in &lt;code&gt;/usr/share/fcitx/mozc/icon/&lt;/code&gt;. You can download a copy of the mozc.png icon &lt;a href=&quot;https://i.stack.imgur.com/W5WpI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, make sure you replace the old mozc icon with this. Once you replace it, open up terminal, and enter &lt;code&gt;chmod 777 /usr/share/fcitx/mozc/icon/mozc.png&lt;/code&gt;, to ensure that the icon will be displayed properly.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="299" LastEditorUserId="19744" LastEditDate="2019-12-09T10:48:37.153" LastActivityDate="2019-12-09T10:48:37.153" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="589" PostTypeId="2" ParentId="551" CreationDate="2015-07-19T17:54:21.220" Score="2" Body="&lt;p&gt;It appears your system does not recognize the USB stick as bootable. As you tested the system's functionality (booting from USB) with another USB stick, it looks like your USB stick's partition is missing the &quot;boot&quot; flag, which is crucial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, first of all, write your USB stick with &lt;code&gt;unetbootin&lt;/code&gt; (if your USB stick wasn't written with that during the last try). From your post I understand you are using Windows. After using &lt;code&gt;unetbootin&lt;/code&gt;, open the &lt;code&gt;cmd&lt;/code&gt; with Administrator privileges. Now, run &lt;code&gt;diskpart&lt;/code&gt;. This will take you into &lt;code&gt;diskpart&lt;/code&gt;'s interactive mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To list all currently attached disks, run &lt;code&gt;list disk&lt;/code&gt; and make sure you know which disk is your USB stick (most likely you recognize the disk's size). Select the disk with its corresponding number via &lt;code&gt;select disk &amp;lt;number&amp;gt;&lt;/code&gt;. Now, you can display the partitions on the disk via &lt;code&gt;list partition&lt;/code&gt;. You &lt;em&gt;should&lt;/em&gt; get exactly one partition, select it via &lt;code&gt;select partition &amp;lt;number&amp;gt;&lt;/code&gt;. Now, run &lt;code&gt;active&lt;/code&gt; - This command sets the bootable flag. To exit &lt;code&gt;diskpart&lt;/code&gt;, run &lt;code&gt;exit&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now your USB stick should be bootable for your computer. If it's not, check if other computers are bootable via it and report back here, we'll figure it out.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-20T09:19:15.020" LastActivityDate="2015-07-20T09:19:15.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="590" PostTypeId="1" AcceptedAnswerId="593" CreationDate="2015-07-19T18:19:21.210" Score="6" ViewCount="375" Body="&lt;p&gt;How can I edit or clear the application list in the Notifications plug? Some old uninstalled apps are still in the list.&lt;/p&gt;&#xA;" OwnerDisplayName="user479" LastEditorUserId="45" LastEditDate="2015-07-19T21:51:22.143" LastActivityDate="2015-07-19T21:51:22.143" Title="How do I edit or clear the application list in the Notifications plug?" Tags="|settings|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="591" PostTypeId="2" ParentId="586" CreationDate="2015-07-19T19:07:09.520" Score="6" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;sudo -i scratch-text-editor /etc/default/acpi-support&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find and change &lt;code&gt;POST_VIDEO=true&lt;/code&gt; to &lt;code&gt;POST_VIDEO=false&lt;/code&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find and change &lt;code&gt;SAVE_VBE_STATE=true&lt;/code&gt; to &lt;code&gt;SAVE_VBE_STATE=false&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart your laptop, issue should be solved.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Source:&lt;a href=&quot;http://www.amitsrivastava.net/2008-03-23-hibernate-suspend-resolved-ubuntu-gutsy-nvidia-dell-vostro/&quot;&gt;Blog&lt;/a&gt;, &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.20/+bug/109529&quot;&gt;Ubuntu Launchpad&lt;/a&gt;, Worked on mine.&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="19" LastEditDate="2015-07-19T22:11:53.410" LastActivityDate="2015-07-19T22:11:53.410" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="592" PostTypeId="1" CreationDate="2015-07-19T19:13:05.923" Score="4" ViewCount="348" Body="&lt;p&gt;Let me first give my laptop's description, it is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Model: HP Compaq 6710s&lt;/strong&gt;   &lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Processor : Dual-Core Intel® Core™2 Duo CPU T7100 @ 1.80GHz&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Memory: 2.4GB&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Graphics: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;And I have just installed &lt;strong&gt;Elementary OS 0.3 64bit on it&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems, whenever I am doing some heavy work, here just using chrome and opening 4-5 tabs along with playing youtube video, my OS just freezes and I am shown a black screen, upon which no button works and I just have to restart the computer manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone please help me figure out what is happening wrong here and how to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand the info is quite inadequate to predict the correct error but I am willing to post any other info required but please explain me as I am newbie to Linux. &lt;/p&gt;&#xA;" OwnerUserId="483" LastEditorUserId="242" LastEditDate="2015-07-21T03:48:49.690" LastActivityDate="2015-07-21T03:48:49.690" Title="Automatically Hanging and Black Screen [No Return]" Tags="|release-freya|" AnswerCount="0" CommentCount="7" ClosedDate="2015-08-17T21:24:21.843" ContentLicense="CC BY-SA 3.0" />
  <row Id="593" PostTypeId="2" ParentId="590" CreationDate="2015-07-19T21:48:42.410" Score="5" Body="&lt;p&gt;The list of apps and their notification settings is held in gsettings at &lt;code&gt;org.pantheon.desktop.gala.notifications apps&lt;/code&gt;. You can edit this either directly with the &lt;code&gt;gsettings&lt;/code&gt; command in Terminal or by installing dconf Editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is currently some work being done to handle this automatically in the future. You can track the issue here: &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-notifications/+bug/1406799&quot;&gt;https://bugs.launchpad.net/switchboard-plug-notifications/+bug/1406799&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-19T21:48:42.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="594" PostTypeId="1" AcceptedAnswerId="606" CreationDate="2015-07-19T23:23:38.623" Score="10" ViewCount="1087" Body="&lt;p&gt;Scratch comes with several color schemes by default. I can choose between them in Preferences &gt; Interface. How can I add my own custom color schemes?&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-20T03:05:50.750" LastActivityDate="2017-10-28T03:38:06.403" Title="How can I add a color scheme to Scratch?" Tags="|themes|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="595" PostTypeId="1" AcceptedAnswerId="599" CreationDate="2015-07-19T23:28:47.320" Score="10" ViewCount="1127" Body="&lt;p&gt;Whenever I enter my password incorrectly upon login, there's a delay before I can try again. Why is this? Is there a way to remove the delay?&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-20T22:18:06.700" LastActivityDate="2022-09-19T15:52:37.107" Title="Why is there a delay when I enter my password incorrectly?" Tags="|security|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="596" PostTypeId="1" AcceptedAnswerId="640" CreationDate="2015-07-19T23:47:39.340" Score="5" ViewCount="986" Body="&lt;p&gt;I've been seeing this triangle-shaped indicator: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LnY6Y.png&quot; alt=&quot;Update information outdated Indicator&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Telling me the following information:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;The update information is outdated. This may be caused by network&#xA;  problems or by a repository that is no longer available. Please update&#xA;  manually by selecting 'Show Updated' from the indicator menu, and&#xA;  watching for any failing repositories. &quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The Software Updater tells me the system is up-to-date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a final note, the indicator seems to go on and off. At first it dissipated without me doing nothing. Then it came back.&lt;/p&gt;&#xA;" OwnerUserId="291" LastEditorUserId="26" LastEditDate="2015-07-20T06:56:32.340" LastActivityDate="2015-07-21T16:36:13.540" Title="How can I get rid of &quot;The update information is outdated.&quot; warning?" Tags="|wingpanel|system|updates|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="597" PostTypeId="2" ParentId="570" CreationDate="2015-07-20T00:04:14.347" Score="3" Body="&lt;p&gt;The easy way to mount a filesystem during boot is to list it in &lt;a href=&quot;https://en.wikipedia.org/wiki/Fstab&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;/etc/fstab&lt;/code&gt;&lt;/a&gt;. However, SSHFS is a &lt;a href=&quot;https://en.wikipedia.org/wiki/Filesystem_in_Userspace&quot; rel=&quot;nofollow&quot;&gt;FUSE&lt;/a&gt; filesystem, so mounting it from a system configuration file is tricky: you wouldn't have permission to access it under your account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While it's possible to get this done, it's easier to do the mounting from your account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;a href=&quot;https://en.wikipedia.org/wiki/Cron&quot; rel=&quot;nofollow&quot;&gt;cron&lt;/a&gt; to schedule a task at boot time to mount that filesystem. Run the command &lt;a href=&quot;http://www.polarhome.com/service/man/?qf=crontab&amp;amp;af=0&amp;amp;sf=1&amp;amp;tf=2&amp;amp;of=ElementaryOS&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;crontab -e&lt;/code&gt;&lt;/a&gt; to edit the &lt;a href=&quot;http://www.polarhome.com/service/man/?qf=crontab&amp;amp;af=0&amp;amp;sf=5&amp;amp;of=ElementaryOS&amp;amp;tf=2&quot; rel=&quot;nofollow&quot;&gt;list of scheduled tasks&lt;/a&gt; for your account, and add a line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;@reboot sshfs remotehost.example.com:/remote/path /path/to/mount/point&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that the &lt;code&gt;sshfs&lt;/code&gt; mount command won't have access to any interactive environment, so it won't be able to ask you for a password or for a key passphrase. If you need that, you'll need to arrange to run the command when you log in, not when the system starts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the network connection isn't available at boot time, you may want to do the mounting when the network becomes available. To do that, add a file to the &lt;a href=&quot;http://www.polarhome.com/service/man/?qf=interfaces&amp;amp;af=0&amp;amp;sf=5&amp;amp;of=ElementaryOS&amp;amp;tf=2&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;if-up.d&lt;/code&gt;&lt;/a&gt; directory called &lt;code&gt;john-mount-sshfs&lt;/code&gt; and containing the following code (replace &lt;code&gt;john&lt;/code&gt; by your username, and replace the host name and paths):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;su -c john &amp;lt;&amp;lt;'EOF'&#xA;if ping -c 1 remotehost.example.com &amp;gt;/dev/null 2&amp;gt;/dev/null; then&#xA;  sshfs remotehost.example.com:/remote/path /path/to/mount/point&#xA;fi&#xA;EOF&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need to supply credentials to the &lt;code&gt;sshfs&lt;/code&gt; command, then &lt;a href=&quot;https://github.com/hellekin/autosshfs&quot; rel=&quot;nofollow&quot;&gt;autosshfs&lt;/a&gt; is likely to be more convenient. It mounts the directory on first access, so you can supply the credentials at that time.&lt;/p&gt;&#xA;" OwnerUserId="190" LastActivityDate="2015-07-20T00:04:14.347" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="599" PostTypeId="2" ParentId="595" CreationDate="2015-07-20T01:50:43.860" Score="20" Body="&lt;p&gt;This is a security feature &lt;a href=&quot;https://unix.stackexchange.com/a/2127&quot;&gt;according to an explanation from another Stack Exchange community&lt;/a&gt;. Here are the two vulnerabilities solved by that feature:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;this (sic) throttles login attempts, meaning someone can't pound the system as fast as it can go trying to crack it (1M attempts a sec? idk).&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If it did it as soon as it verified your credentials were incorrect, you could use the amount of time it took for it to invalidate your credentials to help guess if part of your credentials were correct, dramatically reducing the guessing time.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;As to whether you can remove the delay, no, but you can modify it to a minimum of 2 seconds &lt;a href=&quot;https://unix.stackexchange.com/a/2128&quot;&gt;according to this answer&lt;/a&gt;. Open the file &lt;code&gt;/etc/login.defs&lt;/code&gt; and change the value set to &lt;code&gt;FAIL_DELAY&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="486" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-20T18:11:48.550" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="600" PostTypeId="2" ParentId="577" CreationDate="2015-07-20T03:20:10.573" Score="1" Body="&lt;h2&gt;Please note that this works for all indicators and &lt;em&gt;not just&lt;/em&gt; application indicators. A few exceptions may not be adjustable.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/questions/26114/is-it-possible-to-change-the-order-of-icons-in-the-indicator-applet&quot;&gt;this question&lt;/a&gt; ask Ubuntu, it is possible:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;First:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mkdir -p ~/.local/share/indicators/application&#xA;cp /usr/share/indicator-application/ordering-override.keyfile ~/.local/share/indicators/application/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Indicator order is determined by a keyfile. These commands create such a keyfile for your user account.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;scratch-text-editor ~/.local/share/indicators/application/ordering-override.keyfile&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The order of the indicators is determined by their corresponding number. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Lower numbers, mean higher priorities, which means these will be closer to the right of the panel.&lt;/li&gt;&#xA;&lt;li&gt;You can add any indicator to the list and assign it a priority.&lt;/li&gt;&#xA;&lt;li&gt;To set the order for a custom indicator, just add the name of its executable to the list and give it a custom priority.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/a/343886/1992&quot;&gt;https://askubuntu.com/a/343886/1992&lt;/a&gt;&#xA;Further reading: &lt;a href=&quot;http://www.webupd8.org/2011/06/how-to-change-application-indicators.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.webupd8.org/2011/06/how-to-change-application-indicators.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-26T22:38:14.520" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="601" PostTypeId="1" AcceptedAnswerId="604" CreationDate="2015-07-20T05:01:19.413" Score="6" ViewCount="1688" Body="&lt;p&gt;Previously in elementary OS when I opened a new tab, the new tab would open in the same location that I have in the existing tab. But now, it resets to home. How can I change this?&lt;/p&gt;&#xA;" OwnerUserId="489" LastEditorUserId="45" LastEditDate="2015-07-20T06:55:00.380" LastActivityDate="2020-04-04T14:57:13.867" Title="When I open a new tab in Terminal the prompt goes to Home instead of the current path" Tags="|pantheon-terminal|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="602" PostTypeId="1" CreationDate="2015-07-20T05:48:19.147" Score="3" ViewCount="375" Body="&lt;p&gt;I have two laptops and when I either install elementary OS Freya or run it off a USB. Every time I connect a monitor to the laptop the system responds very sluggishly. For eg: When I click on any of the dock icons it takes a good 12 seconds to respond. This is the case with all icons in fact after I connect the external monitor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have connected two different monitors to two different laptops and experiencing the same issue. I have also re-downloaded elementary OS Freya and done a update and an upgrade with no resolution yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="488" LastEditorUserId="75" LastEditDate="2015-07-20T18:12:19.487" LastActivityDate="2015-08-23T10:55:24.490" Title="Freya very sluggish after plugging in monitor to laptop" Tags="|display|" AnswerCount="1" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="603" PostTypeId="2" ParentId="288" CreationDate="2015-07-20T06:18:49.863" Score="6" Body="&lt;p&gt;The fix was to reinstall &lt;code&gt;libappindicator&lt;/code&gt; and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the link to the answer:&#xA;&lt;a href=&quot;https://askubuntu.com/a/586319/203856&quot;&gt;https://askubuntu.com/a/586319/203856&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="288" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-20T06:18:49.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="604" PostTypeId="2" ParentId="601" CreationDate="2015-07-20T06:53:45.627" Score="14" Body="&lt;p&gt;This is the expected behavior. If you want to open a new tab with the same location as the current tab, you can open a duplicate tab by right clicking on a tab and selecting &quot;Duplicate&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like to permanently change the behavior so that new tabs always open with the directory of the currently focused tab, you'll need to use either dconf Editor or the &lt;code&gt;gsettings&lt;/code&gt; command to set &lt;code&gt;org.pantheon.terminal.settings follow-last-tab&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-07-20T06:53:45.627" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="605" PostTypeId="1" AcceptedAnswerId="607" CreationDate="2015-07-20T08:39:49.813" Score="8" ViewCount="730" Body="&lt;p&gt;I have a secondary partition with a broken Windows installation on my hard drive. I no longer need Windows, but I still have some files that I need there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The partition remained mounted when my Windows system crashed, so I can only mount it as read only using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -o ro /dev/sda2 /media/Windows&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a way to execute this command during the boot process? I can't seem to execute this command without a &lt;code&gt;sudo&lt;/code&gt; privilege.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="45" LastEditDate="2015-07-24T01:42:43.793" LastActivityDate="2018-11-29T12:45:42.300" Title="Is there a way to mount another partition on startup?" Tags="|mount|dual-boot|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="606" PostTypeId="2" ParentId="594" CreationDate="2015-07-20T09:16:15.040" Score="10" Body="&lt;p&gt;Scratch is using the same technology (which is named &lt;code&gt;gtksourceview&lt;/code&gt;) as gedit (the text editor for the GNOME desktop) and is therefore using the way of defining color schemes (also named themes or styles in different places).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All color schemes are defines as XML files, located at &lt;code&gt;/usr/share/gtksourceview-3.0/styles/&lt;/code&gt;. You can either create a copy of an existing color scheme (via &lt;code&gt;sudo cp &amp;lt;existing scheme&amp;gt; &amp;lt;new scheme name&amp;gt;&lt;/code&gt; in the mentioned folder) and modify the scheme according to your wishes, or you can download additional schemes from &lt;a href=&quot;https://wiki.gnome.org/Projects/GtkSourceView/StyleSchemes&quot;&gt;the GNOME project's page about GtkSourceView style schemes&lt;/a&gt; and place them in &lt;code&gt;/usr/share/gtksourceview-3.0/styles/&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-20T09:16:15.040" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="607" PostTypeId="2" ParentId="605" CreationDate="2015-07-20T09:35:10.360" Score="7" Body="&lt;p&gt;You don't need to run this as a command during boot, you can achieve read-only mounting via the file &lt;code&gt;/etc/fstab&lt;/code&gt;. &lt;code&gt;/etc/fstab&lt;/code&gt; contains all filesystems that should be mounted upon boot and that's exactly what you want. It's also possible to add the &lt;code&gt;mount&lt;/code&gt; options (for example, &lt;code&gt;ro&lt;/code&gt; for read-only) to an &lt;code&gt;/etc/fstab&lt;/code&gt; entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The additional line you need to add to the file (for example, via &lt;code&gt;sudo nano /etc/fstab&lt;/code&gt;) looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda2 /media/Windows ntfs ro 0 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you're interested in a cleaner way of creating that line, you'll need the UUID of your partition - The /dev/sdx allocation may change if you're adding different disks or even USB media (most likely it does not, nonetheless you're safer with using the UUID). To display the partition's UUID, run &lt;code&gt;sudo blkid /dev/sda2&lt;/code&gt; and change the line you have to match this syntax:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=&amp;lt;UUID for /dev/sda2&amp;gt; /media/Windows ntfs ro 0 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After saving the file, run &lt;code&gt;sudo mount -a&lt;/code&gt; to make sure your partition is mounted properly (unmount the partition before to make sure it really works).&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-20T11:50:28.643" LastActivityDate="2015-07-20T11:50:28.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="608" PostTypeId="1" CreationDate="2015-07-20T10:00:24.267" Score="7" ViewCount="185" Body="&lt;p&gt;I'm using a laptop. When I plug the charger into my laptop, screen brightness becomes 100%. After removing the charger, it decreases.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Windows there are two options for brightness.&lt;br&gt;&#xA;Why isn't there an option in elementary OS Freya - each for Plug and Unplug brightness?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I set it now?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;My keys work but I have to readjust brightness every time when plug/unplug.&#xA;I want dual option for brightness like this &lt;a href=&quot;https://i.stack.imgur.com/9wWiY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/9wWiY.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and I want to know how to set custom brightness value for my laptop When I disconnect and connect the charger.&lt;/p&gt;&#xA;" OwnerUserId="495" LastEditorUserId="242" LastEditDate="2016-05-17T17:13:40.893" LastActivityDate="2016-09-14T20:06:34.090" Title="Plug/Unplug Brightness Option" Tags="|brightness|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="609" PostTypeId="1" CreationDate="2015-07-20T12:15:47.503" Score="-2" ViewCount="1426" Body="&lt;p&gt;While installing elementary OS from USB, my computer shows a black screen. &lt;img src=&quot;https://i.stack.imgur.com/mDpUX.jpg&quot; alt=&quot;Screenshot of black screen&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you please help me what's wrong?&lt;/p&gt;&#xA;" OwnerUserId="499" LastEditorUserId="34" LastEditDate="2015-07-20T15:31:31.013" LastActivityDate="2015-07-20T15:31:31.013" Title="Unable to install elementary OS: Hardware errors" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ClosedDate="2015-07-21T03:38:34.770" ContentLicense="CC BY-SA 3.0" />
  <row Id="610" PostTypeId="2" ParentId="609" CreationDate="2015-07-20T12:22:56.110" Score="4" Body="&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Machine_Check_Exception&quot; rel=&quot;nofollow&quot;&gt;Machine-check exceptions&lt;/a&gt; are hardware-related, that's not an OS problem. Your hardware is physically broken.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-20T12:57:08.200" LastActivityDate="2015-07-20T12:57:08.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="611" PostTypeId="1" AcceptedAnswerId="613" CreationDate="2015-07-20T13:20:25.390" Score="9" ViewCount="13090" Body="&lt;p&gt;Or other sensor values.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An iMac has also an Ambient Temperature Sensor for example. (what sensor is what?)&lt;/p&gt;&#xA;" OwnerUserId="115" LastActivityDate="2017-02-02T14:06:51.157" Title="How to display CPU-Temperature in Wingpanel?" Tags="|wingpanel|temperature|stats|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="612" PostTypeId="2" ParentId="515" CreationDate="2015-07-20T13:40:35.907" Score="2" Body="&lt;p&gt;Windows can be forced to open maximised using &lt;a href=&quot;http://www.gusnan.se/devilspie2/manual.php&quot; rel=&quot;nofollow&quot;&gt;devilspie2&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install it: &lt;code&gt;$ sudo apt-get install devilspie2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Create the config file: &lt;code&gt;~/.config/devilspie2/open-apps-maximised.lua&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;devilspie2&lt;/code&gt; from the command-line and add it to the list of applications to run on startup.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Example content of &lt;code&gt;open-apps-maximised.lua&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;if (get_window_role()==&quot;pop-up&quot;) then&#xA;    maximize();&#xA;end&#xA;&#xA;if (get_window_name()==&quot;Messenger&quot;) then&#xA;    maximize();&#xA;end&#xA;&#xA;if (get_window_name()==&quot;WhatsApp Web&quot;) then&#xA;    maximize();&#xA;end&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-07-20T13:40:35.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="613" PostTypeId="2" ParentId="611" CreationDate="2015-07-20T13:42:33.290" Score="15" Body="&lt;p&gt;There are several applications&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Power-Gadget indicator&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Download the latest DEB from the &lt;a href=&quot;https://bitbucket.org/baltic/power-gadget/downloads&quot; rel=&quot;noreferrer&quot;&gt;official downloadpage&lt;/a&gt; and install it manually. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/z6Bif.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;PSensor&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Psensor is avaible via elementary OS' repositories, to install it open a terminal session and run the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install psensor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yMTix.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yMTix.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Sensors indicator&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Add the following PPA to your sources or &lt;a href=&quot;https://launchpad.net/~alexmurray/+archive/ubuntu/indicator-sensors/+sourcepub/4472975/+listing-archive-extra&quot; rel=&quot;noreferrer&quot;&gt;download&lt;/a&gt; the DEB and install it manually:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:alexmurray/indicator-sensors&#xA;sudo apt-get update&#xA;sudo apt-get install indicator-sensors&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JaLDd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Syspeek indicator&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Add the following PPA to your sources or &lt;a href=&quot;http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu/pool/main/s/syspeek/&quot; rel=&quot;noreferrer&quot;&gt;download&lt;/a&gt; the DEB and install it manually:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt-get update&#xA;sudo apt-get install syspeek&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/B4zqA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;indicator-cpufreq&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;indicator-cpufreq is avaible via elementary OS' repositories, to install it open a terminal session and run the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-cpufreq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/HdoXZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find a list with sensor codes &lt;a href=&quot;https://web.archive.org/web/20151103144947/http://www.parhelia.ch/blog/statics/k3_keys.html&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Don't forget to install the &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;noreferrer&quot;&gt;elementary+ icon theme&lt;/a&gt; to get all the indicator icons that resemble elementary OS' style.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user170" LastEditDate="2017-02-02T14:06:51.157" LastActivityDate="2017-02-02T14:06:51.157" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="614" PostTypeId="1" CreationDate="2015-07-20T13:44:03.850" Score="3" ViewCount="980" Body="&lt;p&gt;I've been using elementary OS for a while with no problems however I'm having trouble getting it going on my new laptop on which I've installed Freya as the sole OS. It's a high spec machine: i7, SSD etc etc. The problem is that it's booting to a command prompt (tty1) rather than boot in to the GUI. I think I saw a post about this a while ago but now I can't find it. I've had trouble with vanilla Ubuntu in the past where I've had to put nomodeset in the grub file in order to get into the GUI and then load the videos drivers, which was a long shot and isn't getting me anywhere in this instance. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A quick summary of the machine: It has a GeForce GTX960M (2gb DDR5), a quad i7-4910MQ CPU, 16gb of Kingston Hyper-X RAM and a 500gb Samsung SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks!&lt;/p&gt;&#xA;" OwnerUserId="502" LastEditorUserId="502" LastEditDate="2015-07-20T15:53:37.263" LastActivityDate="2015-07-20T23:08:26.143" Title="New elementary OS install boots to terminal" Tags="|release-freya|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="615" PostTypeId="1" CreationDate="2015-07-20T14:22:19.873" Score="2" ViewCount="175" Body="&lt;p&gt;First of all thank you to all of people participating to elementary Os development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to stop switching to Windows partition to play advanced 3D games I am trying to enable the graphic card proprietary drivers on the elementary OS Freya of my HP Pavilion dv7 laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the hardware full spec :&#xA;&lt;a href=&quot;http://support.hp.com/us-en/product/HP-Pavilion-dv7-4100-Entertainment-Notebook-PC-series/4247665/document/c02643026/&quot; rel=&quot;nofollow&quot;&gt;http://support.hp.com/us-en/product/HP-Pavilion-dv7-4100-Entertainment-Notebook-PC-series/4247665/document/c02643026/&lt;/a&gt;&#xA;There is two graphic card in this model, an Intel and a ATI Mobility Radeon HD 5650.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whatever AMD drivers I tried (the one proposed by elementary OS Additional Drivers, compiled from AMD drivers sources, from ppa:ubuntu-x-swat/x-updates (stable) orppa:xorg-edgers/ppa (beta)) , everything seems fine during the installation but it always crash after a reboot during the elementary OS splash screen with the following error :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ 63.350772] Corrupted low memory at ffff880000006598 (6598 phys) = 3c0000000000&#xA;[ 63.350864] Memory corruption detected in low memory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This happen even after a fresh install of elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To successfully boot after that I need to enter in recovery mode and type &quot;apt-get purge fglrx*&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Who succeed to install AMD proprietary driver with same king of hardware and moreover &quot;how&quot;?&lt;/p&gt;&#xA;" OwnerUserId="504" LastEditorUserId="9" LastEditDate="2015-07-23T16:38:48.137" LastActivityDate="2015-07-23T16:38:48.137" Title="Why &quot;Memory corruption&quot; at boot time when enabling AMD proprietary drivers?" Tags="|graphic-drivers|" AnswerCount="0" CommentCount="4" ClosedDate="2015-08-17T21:28:40.227" ContentLicense="CC BY-SA 3.0" />
  <row Id="616" PostTypeId="1" CreationDate="2015-07-20T15:21:59.503" Score="5" ViewCount="12312" Body="&lt;p&gt;I am really fond of the fonts used in elementary OS. Is there a way to download them to use in Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="505" LastEditorUserId="26" LastEditDate="2015-07-20T22:01:03.053" LastActivityDate="2019-09-15T06:11:41.783" Title="Where to download elementary OS fonts for use in Ubuntu?" Tags="|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="617" PostTypeId="1" AcceptedAnswerId="621" CreationDate="2015-07-20T15:27:54.953" Score="2" ViewCount="2920" Body="&lt;p&gt;I have problem to change the permissions on a shared folder from Windows in elementary OS. I am using the &lt;code&gt;chown&lt;/code&gt; command and it throws me the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pablo@pablo:/home$ LANGUAGE=en sudo chown -R pablo /home/pablo/redwin&#xA;[sudo] password for pablo:&#xA;chown: changing ownership of ‘/home/pablo/redwin/pagefile.sys’: Device or resource busy&#xA;chown: changing ownership of ‘/home/pablo/redwin/RECYCLER/S-1-5-21-1606980848-152049171-839522115-1003’: Permission denied&#xA;chown: changing ownership of ‘/home/pablo/redwin/RECYCLER/S-1-5-21-2000478354-1214440339-1801674531-1003’: Permission denied&#xA;chown: changing ownership of ‘/home/pablo/redwin/System Volume Information’: Permission denied&#xA;chown: changing ownership of ‘/home/pablo/redwin’: Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is a shared network folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone knows what could happen?&lt;/p&gt;&#xA;" OwnerUserId="361" LastEditorUserId="190" LastEditDate="2015-07-20T22:19:51.570" LastActivityDate="2015-07-20T22:19:51.570" Title="Cannot change ownership of a network folder shared from Windows" Tags="|files|permissions|samba|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="618" PostTypeId="1" CreationDate="2015-07-20T15:37:02.840" Score="2" ViewCount="232" Body="&lt;p&gt;I have tried to download Freya on a Linux machine using Chrome and Firefox, I also tried to download it in Incognito / Private browser modes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried on a Windows 7 machine using Chrome and Firefox. I did donate (twice) but when I click on download the screen goes grey.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this because I am trying to download from the UK? I see that the store only accepts US orders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On an earlier question posted by someone else  ( &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/509/i-am-unable-to-download-elementary-os&quot;&gt;I am unable to download elementary OS&lt;/a&gt; ) you posted links to a direct download - I tried to follow them but got the message &quot;405 Not Allowed&quot;.&lt;/p&gt;&#xA;" OwnerUserId="506" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-20T21:21:39.833" Title="Can I download elementary OS in the UK?" Tags="|elementary-website|" AnswerCount="1" CommentCount="1" ClosedDate="2015-07-20T22:07:03.523" ContentLicense="CC BY-SA 3.0" />
  <row Id="619" PostTypeId="2" ParentId="618" CreationDate="2015-07-20T15:43:30.207" Score="9" Body="&lt;p&gt;There is no regional restriction for downloading elementary OS and you can download elementary OS for free by typing in $0 in the &quot;custom amount&quot; field, you don't need to donate every time (although it's greatly appreciated, thank you very much).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, the download doesn't start for me either. I'd assume there are some technical problems with elementary's download servers right now and this will be fixed as fast as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;edit:&lt;/strong&gt; &lt;a href=&quot;https://github.com/elementary/mvp/pull/745&quot;&gt;The web team worked on this issue&lt;/a&gt; and the download should be back up without problems (works again for me, at least).&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-07-20T16:37:46.290" LastActivityDate="2015-07-20T16:37:46.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="620" PostTypeId="2" ParentId="616" CreationDate="2015-07-20T15:59:04.253" Score="3" Body="&lt;p&gt;Fonts can be downloaded and installed manually:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download fonts from &lt;a href=&quot;https://github.com/elementary/fonts&quot; rel=&quot;nofollow noreferrer&quot;&gt;the elementary/fonts repository at GitHub&lt;/a&gt;. Navigate into the folders of the desired fonts.&lt;/li&gt;&#xA;&lt;li&gt;Save the &lt;code&gt;*.ttf&lt;/code&gt; files into &lt;code&gt;~/.fonts&lt;/code&gt; (you might have to make hidden files and directories visible using the shortcut &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;h&lt;/kbd&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Open terminal and type &lt;code&gt;sudo fc-cache -f -v&lt;/code&gt; to rebuild font cache&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="34" LastEditorUserId="784" LastEditDate="2019-09-15T06:11:41.783" LastActivityDate="2019-09-15T06:11:41.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="621" PostTypeId="2" ParentId="617" CreationDate="2015-07-20T16:10:06.720" Score="5" Body="&lt;p&gt;As &lt;code&gt;cifs&lt;/code&gt; is kind of foreign concept to Linux, you cannot always use common Linux tools to change things like owner or permissions (especially regarding network shares). To get write access to your share, you will need to add options to your &lt;code&gt;/etc/fstab&lt;/code&gt; entry, more specific the options &lt;code&gt;uid&lt;/code&gt; and &lt;code&gt;gid&lt;/code&gt;. Currently, the user &lt;code&gt;root&lt;/code&gt; is mounting your network share during boot up, so the system does not know your want write access (respectively ownership) to it as well. To get the values for &lt;code&gt;uid&lt;/code&gt; and &lt;code&gt;gid&lt;/code&gt;, run &lt;code&gt;id -u $USER&lt;/code&gt; (for your &lt;code&gt;uid&lt;/code&gt;) and &lt;code&gt;id -g $USER&lt;/code&gt; (for your &lt;code&gt;gid&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, modify your &lt;code&gt;/etc/fstab&lt;/code&gt; accordingly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//path/to/share /mount/point cifs auto,user=&amp;lt;user&amp;gt;,password=&amp;lt;password&amp;gt;,exec,user,nounix,rw,iocharset=utf8,uid=&amp;lt;UID&amp;gt;,gid=&amp;lt;GID&amp;gt; 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-20T16:10:06.720" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="624" PostTypeId="2" ParentId="509" CreationDate="2015-07-20T16:44:35.993" Score="1" Body="&lt;p&gt;It turns out there was a small issue with the modal, which has since &lt;a href=&quot;https://github.com/elementary/mvp/pull/745&quot; rel=&quot;nofollow&quot;&gt;been fixed&lt;/a&gt; by the web team.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-20T16:44:35.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="625" PostTypeId="1" CreationDate="2015-07-20T17:50:46.147" Score="6" ViewCount="578" Body="&lt;p&gt;I am just getting started with workspaces, and I can easily have two different instances of Chrome running in two different workspaces, but for other apps (Files, Geary, Keepass, etc.) when I click on it in the Plank of one workspace, it pops over to the other workspace to the open window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is annoying. Is there a way I can have multiple instances of apps open in different workspaces?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AND as a bonus, can I have multiple Planks too, so I can see what's open in each workspace? Now the Plank just shows all open windows across all workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2015-07-21T02:13:11.787" Title="Multiple Instances of Geary, Files, etc. for different workspaces?" Tags="|plank|desktop|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="626" PostTypeId="1" CreationDate="2015-07-20T18:43:04.977" Score="3" ViewCount="803" Body="&lt;p&gt;I performed a clean install of Elementary OS Freya just a couple of hours ago on a Lenovo G580 (20150) laptop (from which I'm now writing) with a brand new replacement HDD. For some reason, the battery utility detects the battery itself, but does not take readings of any kind.&lt;/p&gt;&#xA;&lt;p&gt;So, what are my options for fixing this pesky issue?&lt;/p&gt;&#xA;&lt;p&gt;Edit: [upower -d]&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Device: /org/freedesktop/UPower/devices/line_power_ACAD&#xA;  native-path:          ACAD&#xA;  power supply:         yes&#xA;  updated:              21.07.2015 (вт) 15,31,55 EEST (1371 seconds ago)&#xA;  has history:          no&#xA;  has statistics:       no&#xA;  line-power&#xA;    online:             yes&#xA;&#xA;Device: /org/freedesktop/UPower/devices/battery_BAT1&#xA;  native-path:          BAT1&#xA;  vendor:               LENOVO&#xA;  model:                PABAS0241231&#xA;  serial:               41167&#xA;  power supply:         yes&#xA;  updated:              21.07.2015 (вт) 15,54,30 EEST (16 seconds ago)&#xA;  has history:          yes&#xA;  has statistics:       yes&#xA;  battery&#xA;    present:             yes&#xA;    rechargeable:        yes&#xA;    state:               charging&#xA;    energy:              0 Wh&#xA;    energy-empty:        0 Wh&#xA;    energy-full:         0 Wh&#xA;    energy-full-design:  0 Wh&#xA;    energy-rate:         0 W&#xA;    percentage:          0%&#xA;    capacity:            100%&#xA;    technology:          lithium-ion&#xA;&#xA;Daemon:&#xA;  daemon-version:  0.9.23&#xA;  can-suspend:     no&#xA;  can-hibernate:   no&#xA;  on-battery:      no&#xA;  on-low-battery:  no&#xA;  lid-is-closed:   no&#xA;  lid-is-present:  yes&#xA;  is-docked:       no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Final edit: [PROBLEM SOLVED]&lt;/p&gt;&#xA;&lt;p&gt;The problem seems to have resolved itself! For the last few days I had been running off the charger, but the battery was plugged in too. When I plugged off the charger, the laptop shut down, which led me to believe it wasn't charging the battery. I removed the battery from its slot and inserted it again. That fixed the problem (though I have no idea why), since the menu bar now displays the charge percentage and it started from 1%, meaning the battery was completely empty before. (Laptop wasn't used for a month and a half prior to these events.)&#xA;I hope this helps somebody experiencing the same problem.&#xA;And just a few quick tips, which I already knew, but for some reason ignored:&lt;/p&gt;&#xA;&lt;h1&gt;1- Lithium ion batteries live longer if they aren't charged to 100% every time. About 60% will give you the longest life span.&lt;/h1&gt;&#xA;&lt;h1&gt;2- Lithium ion batteries DEGRADE VERY FAST WHEN THEY ARE FULLY DISCHARGED. Don't let them stay below 10% capacity for a long time.&lt;/h1&gt;&#xA;" OwnerUserId="509" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-21T13:54:55.317" Title="elementary OS install doesn't detect battery statistics" Tags="|release-freya|applications|" AnswerCount="0" CommentCount="5" ClosedDate="2015-07-21T18:57:56.553" ContentLicense="CC BY-SA 3.0" />
  <row Id="627" PostTypeId="1" CreationDate="2015-07-20T19:10:56.930" Score="3" ViewCount="157" Body="&lt;p&gt;I have annoying issue that my laptop is always trying to connect to my neighbour's WiFi which although it has a very weak signal strength always beats my access point placed in the same room with the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please don't answer that I should go and edit connections and remove &quot;connect automatically&quot; on that particular network because that works only with the networks that my laptop had been connected to previously which is not the case here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched the web but doesn't seem to be able to find any answer for my predicament.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="242" LastEditDate="2015-07-21T04:00:18.433" LastActivityDate="2015-07-21T04:00:18.433" Title="How to prevent Freya to try to connect to a specific WiFi network?" Tags="|wifi|networking|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="628" PostTypeId="1" AcceptedAnswerId="630" CreationDate="2015-07-20T20:43:55.993" Score="9" ViewCount="8033" Body="&lt;p&gt;Where and/or how should I store images so that they appear in &lt;code&gt;Preferences/Desktop/Backgrounds&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-06-05T11:41:38.860" Title="How do I add images to select as the desktop's background?" Tags="|desktop|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="629" PostTypeId="2" ParentId="628" CreationDate="2015-07-20T20:48:15.913" Score="9" Body="&lt;p&gt;Background images are stored at &lt;code&gt;/usr/share/backgrounds&lt;/code&gt;. You can easily copy files to this folder via administrative privileges (either per Files in root mode or &lt;code&gt;sudo cp&lt;/code&gt;) and they will show up in Switchboard for every user on your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want to make the new backgrounds available for all users, you can copy wallpapers to &lt;code&gt;/home/&amp;lt;username&amp;gt;/.local/share/backgrounds&lt;/code&gt;. You don't need administrative privileges and the wallpaper will only be available for your user. As Rafael pointed out, you can also just drag and drop images to the wallpaper selection - It will be added to the folder I mentioned above as well!&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="22" LastEditDate="2016-06-05T11:41:38.860" LastActivityDate="2016-06-05T11:41:38.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="630" PostTypeId="2" ParentId="628" CreationDate="2015-07-20T20:49:36.157" Score="11" Body="&lt;p&gt;You can drag&amp;amp;drop them into the backgrounds window and they will automatically appear in the listing.&lt;br&gt;&#xA;All the drag&amp;amp;dropped pictures are being copied to &lt;code&gt;~/.local/share/backgrounds/&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-07-20T20:49:36.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="631" PostTypeId="2" ParentId="616" CreationDate="2015-07-20T22:03:15.120" Score="7" Body="&lt;p&gt;The good news is, you may find that many of the fonts used in elementary OS are already in Ubuntu! They are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.google.com/fonts/specimen/Raleway&quot; rel=&quot;noreferrer&quot;&gt;Raleway&lt;/a&gt; (logotype font)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.google.com/fonts/specimen/Droid+Sans&quot; rel=&quot;noreferrer&quot;&gt;Droid Sans&lt;/a&gt; (window titles)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.google.com/fonts/specimen/Open+Sans&quot; rel=&quot;noreferrer&quot;&gt;Open Sans&lt;/a&gt; (various)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Alternative, you can install the &lt;code&gt;elementary-fonts&lt;/code&gt; package from the &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable&quot; rel=&quot;noreferrer&quot;&gt;elementary OS Stable PPA&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-20T22:03:15.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="632" PostTypeId="5" CreationDate="2015-07-20T22:21:20.073" Score="0" Body="&lt;p&gt;Greeter is the operating system's lock/login screen. It is handled by the &lt;a href=&quot;/questions/tagged/lightdm&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;lightdm&amp;#39;&quot; rel=&quot;tag&quot;&gt;lightdm&lt;/a&gt; display manager and known as &quot;Pantheon Greeter&quot; in elementary OS, though other greeters are available.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-01T23:45:17.810" LastActivityDate="2016-10-01T23:45:17.810" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="633" PostTypeId="4" CreationDate="2015-07-20T22:21:20.073" Score="0" Body="Greeter is the operating system's lock/login screen. It is handled by the LightDM display manager and known as &quot;Pantheon Greeter&quot; in elementary OS, though other greeters are available." OwnerUserId="45" LastEditorUserId="5565" LastEditDate="2016-10-02T14:31:37.947" LastActivityDate="2016-10-02T14:31:37.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="634" PostTypeId="2" ParentId="614" CreationDate="2015-07-20T23:08:26.143" Score="1" Body="&lt;p&gt;May not necessarily be your issue; but I had this issue with Luna while back on my laptop - the graphics driver was not installed, I had to manually install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This guide may help:&#xA;&lt;a href=&quot;http://www.binarytides.com/install-nvidia-drivers-ubuntu-14-04/&quot; rel=&quot;nofollow&quot;&gt;http://www.binarytides.com/install-nvidia-drivers-ubuntu-14-04/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="439" LastActivityDate="2015-07-20T23:08:26.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="635" PostTypeId="2" ParentId="625" CreationDate="2015-07-21T02:13:11.787" Score="2" Body="&lt;p&gt;I am sorry I can't provide a full answer right now, but I can answer one small part of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To open new instances of Files you can right click its icon in Plank and click &quot;New Window&quot;. I opened two in separate workspaces and the behaviour changes to show or hide Files instead of switching. You can also right click the icon when multiple instances are open to switch to the other instance(s).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If anyone provides a full answer, feel free to take this info or edit yours into this answer.&lt;/p&gt;&#xA;" OwnerUserId="85" LastActivityDate="2015-07-21T02:13:11.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="636" PostTypeId="1" AcceptedAnswerId="637" CreationDate="2015-07-21T02:42:43.347" Score="7" ViewCount="546" Body="&lt;p&gt;On my laptop I can adjust the brightness just fine, however I am unable to (or at least unable to find the way to) adjust the brightness on my 2nd display. When I have my dual display connected and I adjust the brightness, it only changes on my laptop's screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have f.lux installed and this is working on both displays.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running on a Asus VivoBook S400CA-UH51 with an Intel HD Graphics 4000 graphics card.&lt;/p&gt;&#xA;" OwnerUserId="518" LastActivityDate="2018-06-03T04:27:18.427" Title="Adjust brightness on 2nd display?" Tags="|brightness|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="637" PostTypeId="2" ParentId="636" CreationDate="2015-07-21T03:34:26.883" Score="8" Body="&lt;h1&gt;You can't, I suggest using a 3rd party application.&lt;/h1&gt;&#xA;&lt;p&gt;There is no built in application for changing the brightness of an external monitor on elementary.&lt;/p&gt;&#xA;&lt;p&gt;This is also true of basically all the Linux distros and Desktop Environments I know of.&lt;/p&gt;&#xA;&lt;h3&gt;Why?&lt;/h3&gt;&#xA;&lt;p&gt;Well, changing the brightness of an external monitor is not always guaranteed to work the same way. Most external monitors have their own settings manager (built into the monitor). Also, remember, an external monitor could be anything from a TV to a Projector.&lt;br /&gt;&#xA;Too many variables!&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-21T03:34:26.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="638" PostTypeId="2" ParentId="627" CreationDate="2015-07-21T03:58:06.547" Score="3" Body="&lt;p&gt;If it shows up in your network connection list, then just select and click delete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9K0i6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should stop it from connecting automatically until/unless you attempt to connect again manually.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-21T03:58:06.547" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="639" PostTypeId="1" AcceptedAnswerId="642" CreationDate="2015-07-21T07:34:18.950" Score="1" ViewCount="1660" Body="&lt;p&gt;The issue is as simple as that. I tried installing elementary OS on a Virtual Machine inside my Windows 8.1 installation and went &quot;great&quot;(meaning there was the usual Linux/VirtualBox issues but it installed and ran fine) so I made the move and created a bootable USB not with Rufus but with that other software suggested by Ubuntu itself, can't recall the name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, I tried re-downloading the image and re-making the bootable USB already but it won't install on my Giada MiniPC for some reason... actually, it installs but &lt;strong&gt;there's only the wallpaper after first boot&lt;/strong&gt;!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I manually reboot it I get to the login and when I log there's the desktop alone again...tried having my Linux-savvy friend do something about it but it doesn't accept the common commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The cursor is there but there's really nothing at all aside from the desktop, why is that? The computer is this one: &lt;a href=&quot;http://www.giadapc.com/products/minipc/slim%20series/i35B.html&quot; rel=&quot;nofollow&quot;&gt;http://www.giadapc.com/products/minipc/slim%20series/i35B.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt; I forgot to mention I thought about monitor/aspect ratio problems but I tried changing the monitor(I got a normal 22&quot;something Fujitsu working great during installation) and even the cables from HDMI to VGA etc.&lt;/p&gt;&#xA;" OwnerUserId="521" LastEditorUserId="34" LastEditDate="2015-07-24T10:14:11.950" LastActivityDate="2015-07-24T10:14:11.950" Title="Installing on Giada MiniPC - blank desktop!" Tags="|system-installation|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="640" PostTypeId="2" ParentId="596" CreationDate="2015-07-21T08:22:33.047" Score="2" Body="&lt;p&gt;Using one or more PPAs that don't work might cause this problem sometimes. Run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to check which PPAs are causing the error and remove them if necessary.&lt;/p&gt;&#xA;" OwnerUserId="523" LastEditorUserId="142" LastEditDate="2015-07-21T16:36:13.540" LastActivityDate="2015-07-21T16:36:13.540" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="641" PostTypeId="1" CreationDate="2015-07-21T08:27:03.470" Score="4" ViewCount="134" Body="&lt;p&gt;Sometimes when a I run an app from QtCreator (version 3.4.2) the system freezes. I can move the mouse (it moves the cursor slowly and in small jumps) but I cannot do anything else. It's not even possible to switch to another TTY (&lt;kbd&gt;ctrl&lt;/kbd&gt; + &lt;kbd&gt;alt&lt;/kbd&gt; + &lt;kbd&gt;fn&lt;/kbd&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The SSH works because I can login from another computer. The top command shows high activity in &lt;code&gt;xorg&lt;/code&gt; (100%) but if I try to kill it (&lt;code&gt;sudo killall xorg&lt;/code&gt;) the terminal doesn't respond (don't give back the prompt).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it's a Qt problem but It start happening when I switched to elementary OS. Maybe any problem with the gpu drivers? I am using a intel integrated GPU (&lt;code&gt;lspci | grep VGA&lt;/code&gt; returns: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)).&lt;/p&gt;&#xA;" OwnerUserId="145" LastEditorUserId="145" LastEditDate="2015-07-22T06:13:20.557" LastActivityDate="2015-07-22T06:13:20.557" Title="QtCreator crashes X.org" Tags="|graphic-drivers|system|" AnswerCount="0" CommentCount="9" ClosedDate="2015-08-03T11:36:39.243" ContentLicense="CC BY-SA 3.0" />
  <row Id="642" PostTypeId="2" ParentId="639" CreationDate="2015-07-21T08:38:29.613" Score="3" Body="&lt;p&gt;I found a &lt;a href=&quot;http://youcantborrowmyrack.blogspot.de/2015/02/elementary-os-black-screen-and-blank.html&quot; rel=&quot;nofollow&quot;&gt;blog post&lt;/a&gt; talking about your issue and it looks like - at least for them - it was possible to solve this with a boot option. I'm not exactly sure it will help you as well, but here is an answer how to set this boot option. If it does &lt;strong&gt;not&lt;/strong&gt; work, just let me know and we'll figure this out in another way.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot up your computer to the blank desktop and press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt;. You will now see a terminal-based interface (black screen, white font).&lt;/li&gt;&#xA;&lt;li&gt;Log in with your username and your password. When typing in your password, it will &lt;strong&gt;not&lt;/strong&gt; be displayed in any way, so that's expected behavior, don't be irritated.&lt;/li&gt;&#xA;&lt;li&gt;After the login, you run &lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt; (it will ask for your password again, because you are using &lt;code&gt;sudo&lt;/code&gt;), which opens the texteditor &lt;code&gt;nano&lt;/code&gt; to edit a file responsible for how GRUB (the bootloader) boots up your system. You can move the cursor of &lt;code&gt;nano&lt;/code&gt; via the arrow keys.&lt;/li&gt;&#xA;&lt;li&gt;Find the line &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&lt;/code&gt; and add &lt;code&gt;nomodeset&lt;/code&gt; as option. The line should look like this now: &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;To save and leave &lt;code&gt;nano&lt;/code&gt; press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;o&lt;/kbd&gt; first, press enter to confirm the file name, and press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;x&lt;/kbd&gt; afterwards to go back to the command line.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo update-grub&lt;/code&gt; now to update the settings you just have changed.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo reboot&lt;/code&gt; to reboot your system. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;After the reboot, it &lt;em&gt;should&lt;/em&gt; display your full desktop, including Wingpanel and Pantheon's dock. As said, if not, just let me know and we'll figure the issue out.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-07-21T08:38:29.613" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="644" PostTypeId="1" CreationDate="2015-07-21T10:50:56.677" Score="1" ViewCount="269" Body="&lt;p&gt;Freya is kind of sluggish on my Mac mini late 2009: core 2 duo, 8 GB of ram, SSD disk &amp;amp; gforce 9400. I am experiencing a ~1 sec delay to focus windows and when I click on apps buttons. Also the wing panel is slow as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My guess that it is something with Gala, because I don't have this issues with Xubuntu 14.04 (same base as Freya).﻿&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas ? Should I wait  for the new hardware enablement stack ? When it will came out ?&lt;/p&gt;&#xA;" OwnerUserId="524" LastActivityDate="2015-07-21T17:48:24.993" Title="Freya sluggish on Mac Mini late 2009 (geforce 9400)" Tags="|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="646" PostTypeId="2" ParentId="644" CreationDate="2015-07-21T13:01:38.283" Score="1" Body="&lt;p&gt;This is most likely due to your video card driver. If you are using the open source video driver that installs with freya by default (noveau), I and many others have experienced quite a few issues with that driver. You should try installing the proprietary nvidia drivers and see if that fixes your issue. Personally I've had the best luck with the 331 version of the nvidia driver. You can install it by running &lt;code&gt;sudo apt-get install nvidia-331 nvidia-331-updates&lt;/code&gt; from the terminal and then rebooting your machine.&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-07-21T13:01:38.283" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="647" PostTypeId="1" AcceptedAnswerId="648" CreationDate="2015-07-21T13:08:12.967" Score="6" ViewCount="579" Body="&lt;p&gt;I installed NitroShare on this Freya-running laptop and a Windows desktop. The Windows version works like a charm, but the one on the laptop... Well, not so much. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know for a fact, that the program itself works, because I can transfer files between the two and they go straight to the default folder (Desktop). The problem is that the menu bar icon doesn't show up, thus I can't edit any settings on the side of the laptop.&lt;/p&gt;&#xA;" OwnerUserId="509" LastEditorUserId="45" LastEditDate="2015-09-01T17:30:27.937" LastActivityDate="2015-09-01T17:30:27.937" Title="Nitroshare loads, but icon doesn't appear in the menu bar" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="648" PostTypeId="2" ParentId="647" CreationDate="2015-07-21T16:34:48.127" Score="5" Body="&lt;p&gt;This is a bug on NitroShare's side.&lt;br&gt;&#xA;NitroShare doesn't recognize elementary OS' desktop environment (Pantheon) and that is the reason why it doesn't know how to display the indicator icon.&lt;br&gt;&#xA;Now, let's make NitroShare believe we are using Ubuntu. Run the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=unity nitroshare&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Nitroshare starts and it's icon shows up in Wingpanel as expected.&lt;br&gt;&#xA;This is only a workaround, it's up to NitroShare's developer to fix this bug, please report it at Nitroshare's &lt;a href=&quot;https://github.com/nitroshare/nitroshare-desktop/issues&quot;&gt;issues site&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-07-21T16:44:57.550" LastActivityDate="2015-07-21T16:44:57.550" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="649" PostTypeId="1" AcceptedAnswerId="651" CreationDate="2015-07-21T17:43:56.990" Score="3" ViewCount="245" Body="&lt;p&gt;I'm having trouble with the Adobe Flash Plugin. Firefox, with which I substituted Midori, blocks it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to re-install it from the software center, I have installed flashplugin-installer, I tried apt-get update &amp;amp; install. All with no success. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm wondering, might it be due to &lt;a href=&quot;http://www.theguardian.com/technology/2015/jul/14/facebook-end-adobe-flash-firefox-blocks-hacking&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/562035/adobe-flash-plugin-is-vulnerable-outdated-in-14-04-but-there-is-no-update-in-fir&quot;&gt;Here&lt;/a&gt; a related post in SE Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I'm experiencing &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/596/how-can-i-get-rid-of-the-update-information-is-outdated-warning&quot;&gt;this&lt;/a&gt; same issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestion?&lt;/p&gt;&#xA;" OwnerUserId="528" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-07-22T10:26:03.793" Title="Adobe Flash Plugin Vulnerable" Tags="|applications|apt|web-development|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="650" PostTypeId="2" ParentId="644" CreationDate="2015-07-21T17:48:24.993" Score="0" Body="&lt;p&gt;The 14.04.3 hardware enablement stack should be installable in August, and may provide a resolution to your issue. Alternatively, your graphics card may be using a sub-optimal driver. Consider using &lt;code&gt;Additional Drivers&lt;/code&gt; to select an alternative and check for any improvement (this will likely require a reboot).&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-21T17:48:24.993" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="651" PostTypeId="2" ParentId="649" CreationDate="2015-07-21T17:53:01.897" Score="3" Body="&lt;h3&gt;Fix your Sources&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you are seeing the “The update information is outdated.” warning, you should use the &lt;code&gt;Software Updater&lt;/code&gt; to check for updates, and install any available. That should get rid of that warning, unless one of the sources you've added is unavailable or unverifiable. In that instance, you should remove the affected sources.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Flash is Dead&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Since Flash is deprecated in Firefox and on Linux, I think it is safe to assume that regardless of whether it is a numbering issue or not, an official fix is not forthcoming. If you can, try to simply get by without it, or you can right click to allow always.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Alternatives&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.gnu.org/software/gnash/&quot; rel=&quot;nofollow&quot;&gt;Gnash&lt;/a&gt; is a GNU alternative to Flash. It does not appear to be actively maintained.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://lightspark.github.io/&quot; rel=&quot;nofollow&quot;&gt;LightSpark&lt;/a&gt; is another alternative, but one which appears to be reasonably well maintained.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-07-21T18:48:30.150" LastActivityDate="2015-07-21T18:48:30.150" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="652" PostTypeId="1" CreationDate="2015-07-21T18:04:04.803" Score="2" ViewCount="442" Body="&lt;p&gt;Mostly a single click will act like two clicks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example: I want to go back one page on a web-browser but go back two&#xA;or I have word processor open and want to open the drop down menu to change fonts and it opens and closes in one stroke as though I had double-clicked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It makes things extra tedious and laborious as one can imagine having to try again each time V E R Y carefully &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already checked the Mouse speed specification under Systems and brought that right down but no change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions?&lt;/p&gt;&#xA;" OwnerUserId="529" LastEditorUserId="26" LastEditDate="2015-07-21T18:42:45.087" LastActivityDate="2015-07-22T03:36:33.100" Title="How can I stop my mouse double-clicking when I only click once?" Tags="|mouse|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="654" PostTypeId="1" AcceptedAnswerId="655" CreationDate="2015-07-22T02:59:01.837" Score="3" ViewCount="815" Body="&lt;p&gt;I was having some trouble with &lt;a href=&quot;https://www.r-project.org/&quot; rel=&quot;nofollow&quot;&gt;R&lt;/a&gt; so I thought I'd just remove it and re-install it. So I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove r-base*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and mindlessly hit return (why??).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I sat there as my system was immediately stripped of the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  accountsservice elementary-standard evolution-data-server&#xA;  evolution-data-server-online-accounts filelight gcr geary&#xA;  gnome-control-center gnome-keyring gnome-settings-daemon indicator-bluetooth&#xA;  indicator-datetime indicator-keyboard indicator-sound kde-runtime&#xA;  kolourpaint4 kubuntu-debug-installer language-selector-common&#xA;  libaccountsservice0 libebackend-1.2-7 libebook-1.2-14&#xA;  libebook-contacts-1.2-0 libecal-1.2-16 libedata-book-1.2-20&#xA;  libedata-cal-1.2-23 libedataserver-1.2-18 libfolks-eds25 libgcr-base-3-1&#xA;  libgcr-ui-3-1 libgdata13 libgoa-backend-1.0-1 libmaya-calendar0&#xA;  maya-calendar maya-calendar-plugin-caldav maya-calendar-plugin-google&#xA;  midori-granite modemmanager okular oneconf pantheon-shell&#xA;  pantheon-xsession-settings python-ubuntu-sso-client qapt-batch r-base&#xA;  r-base-core r-base-dev r-base-html r-cran-boot r-cran-class r-cran-cluster&#xA;  r-cran-codetools r-cran-foreign r-cran-kernsmooth r-cran-lattice r-cran-mass&#xA;  r-cran-matrix r-cran-mgcv r-cran-nlme r-cran-nnet r-cran-rpart&#xA;  r-cran-spatial r-cran-survival r-recommended software-center&#xA;  switchboard-plug-gcc-bluetooth switchboard-plug-gcc-color&#xA;  switchboard-plug-gcc-mouse switchboard-plug-gcc-network&#xA;  switchboard-plug-gcc-printer switchboard-plug-gcc-sound&#xA;  switchboard-plug-gcc-ua switchboard-plug-gcc-wacom switchboard-plug-locale&#xA;  switchboard-plug-useraccounts switchboard-plug-users ubuntu-sso-client&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and had the following installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  apparmor-easyprof apparmor-easyprof-ubuntu click click-apparmor&#xA;  gir1.2-click-0.4 gir1.2-gee-0.8 gir1.2-json-1.0 hud libandroid-properties1&#xA;  libboost-program-options1.54.0 libcapnp-0.4.0 libclick-0.4-0 libcolumbus1&#xA;  libcolumbus1-common libdbus-cpp2 libdbusmenu-qt5 libdee-qt5-3 libgflags2&#xA;  libglewmx1.10 libgoogle-glog0 libgsettings-qt1 libhud-client2 libhud2&#xA;  libhybris-common1 libjsoncpp0 liblttng-ust-ctl2 liblttng-ust0&#xA;  libmediascanner-2.0-0 libmirclient7 libmirclientplatform-mesa libmirplatform&#xA;  libmirplatformgraphics-mesa libmirprotobuf0 libmirserver18 libnux-4.0-0&#xA;  libnux-4.0-common libpocketsphinx1 libprocess-cpp1 libprotobuf8&#xA;  libqdjango-db0 libqmenumodel0 libqt5core5a libqt5dbus5 libqt5feedback5&#xA;  libqt5gui5 libqt5multimedia5 libqt5network5 libqt5organizer5&#xA;  libqt5qml-graphicaleffects libqt5qml5 libqt5quick5 libqt5sql5&#xA;  libqt5sql5-sqlite libqt5svg5 libqt5widgets5 libqt5xmlpatterns5&#xA;  libsphinxbase1 libthumbnailer0 libubuntu-application-api-mirserver1&#xA;  libubuntu-location-service0 libubuntu-platform-hardware-api1&#xA;  libunity-action-qt1 libunity-api0 libunity-core-6.0-9 libunity-mir1&#xA;  libunity-scopes1 libunityvoice1 libunwind8 libupstart-app-launch2 liburcu1&#xA;  libusermetricsoutput1 libxcb-icccm4 libxcb-image0 libxcb-render-util0&#xA;  libxcb-xkb1 libxkbcommon-x11-0 libzmqpp3 mediascanner2.0 python3-apparmor&#xA;  python3-apparmor-click python3-click python3-debian python3-libapparmor&#xA;  qmenumodel-qml qtdeclarative5-dee-plugin qtdeclarative5-gsettings1.0&#xA;  qtdeclarative5-qtfeedback-plugin qtdeclarative5-qtquick2-plugin&#xA;  qtdeclarative5-ubuntu-settings-components&#xA;  qtdeclarative5-ubuntu-settings-components-assets&#xA;  qtdeclarative5-ubuntu-thumbnailer0.1 qtdeclarative5-ubuntu-ui-toolkit-plugin&#xA;  qtdeclarative5-unity-action-plugin qtdeclarative5-unity-notifications-plugin&#xA;  qtdeclarative5-window-plugin qtdeclarative5-xmllistmodel-plugin&#xA;  sphinx-voxforge-hmm-en sphinx-voxforge-lm-en sqlite3 thumbnailer-service&#xA;  ubuntu-ui-toolkit-theme unity-plugin-scopes unity-scope-mediascanner2&#xA;  unity-scope-scopes unity-services unity-voice-service unity8 unity8-private&#xA;  upstart-app-launch upstart-app-launch-tools usermetricsservice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After it was finished removing whatever it decided to remove, I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install &amp;lt;all packages in the &quot;removed&quot; block&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Apparently it re-installed the removed packages without issues, but now I'm afraid of restarting my system and finding out I bricked it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I now get the message that all the following can be safely removed via &lt;code&gt;autoremove&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  freeglut3 gir1.2-peas-1.0 gtk3-engines-unico hud libandroid-properties1&#xA;  libboost-program-options1.54.0 libcapnp-0.4.0 libcolumbus1&#xA;  libcolumbus1-common libdbus-cpp2 libdbusmenu-qt5 libdee-qt5-3 libgflags2&#xA;  libglewmx1.10 libgoogle-glog0 libgrip0 libgsettings-qt1 libhud-client2&#xA;  libhud2 libhybris-common1 libjsoncpp0 libmediascanner-2.0-0 libmirclient7&#xA;  libmirclientplatform-mesa libmirplatform libmirplatformgraphics-mesa&#xA;  libmirprotobuf0 libmirserver18 libnux-4.0-0 libnux-4.0-common&#xA;  libpocketsphinx1 libprocess-cpp1 libprotobuf8 libqdjango-db0 libqmenumodel0&#xA;  libqt5core5a libqt5dbus5 libqt5feedback5 libqt5gui5 libqt5multimedia5&#xA;  libqt5network5 libqt5organizer5 libqt5qml-graphicaleffects libqt5qml5&#xA;  libqt5quick5 libqt5sql5 libqt5sql5-sqlite libqt5svg5 libqt5widgets5&#xA;  libqt5xmlpatterns5 libsphinxbase1 libthumbnailer0&#xA;  libubuntu-application-api-mirserver1 libubuntu-location-service0&#xA;  libubuntu-platform-hardware-api1 libunity-action-qt1 libunity-api0&#xA;  libunity-core-6.0-9 libunity-mir1 libunity-scopes1 libunityvoice1 libunwind8&#xA;  libusermetricsoutput1 libxcb-icccm4 libxcb-image0 libxcb-render-util0&#xA;  libxcb-xkb1 libxkbcommon-x11-0 libzmqpp3 linux-headers-3.13.0-53&#xA;  linux-headers-3.13.0-53-generic linux-headers-3.16.0-34&#xA;  linux-headers-3.16.0-34-generic linux-headers-generic-lts-utopic&#xA;  linux-image-3.13.0-53-generic linux-image-3.16.0-34-generic&#xA;  linux-image-extra-3.13.0-53-generic linux-image-extra-3.16.0-34-generic&#xA;  linux-image-generic-lts-utopic linux-signed-image-3.13.0-53-generic&#xA;  mediascanner2.0 python-colorama python-distlib python-html5lib python-opengl&#xA;  python-wheel qmenumodel-qml qtdeclarative5-dee-plugin&#xA;  qtdeclarative5-gsettings1.0 qtdeclarative5-qtfeedback-plugin&#xA;  qtdeclarative5-qtquick2-plugin qtdeclarative5-ubuntu-settings-components&#xA;  qtdeclarative5-ubuntu-settings-components-assets&#xA;  qtdeclarative5-ubuntu-thumbnailer0.1 qtdeclarative5-ubuntu-ui-toolkit-plugin&#xA;  qtdeclarative5-unity-action-plugin qtdeclarative5-unity-notifications-plugin&#xA;  qtdeclarative5-window-plugin qtdeclarative5-xmllistmodel-plugin&#xA;  sphinx-voxforge-hmm-en sphinx-voxforge-lm-en sqlite3 thumbnailer-service&#xA;  ubuntu-ui-toolkit-theme unity-scope-mediascanner2 unity-scope-scopes&#xA;  unity-services unity-voice-service unity8-private usermetricsservice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which of course I'm too afraid to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something I should do? Any recommendations on how to fix this mess? Should I install some other package? Can I &lt;code&gt;autoremove&lt;/code&gt; the bazillion packages listed?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2015-07-22T03:25:40.363" LastActivityDate="2016-03-15T04:09:00.890" Title="Did I just destroy my Freya?" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="655" PostTypeId="2" ParentId="654" CreationDate="2015-07-22T03:33:10.273" Score="7" Body="&lt;p&gt;Just to be safe, run the following before rebooting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;sudo apt-get clean&#xA;sudo apt-get autoremove&#xA;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best way for you to fix this problem might be to reinstall elementary OS. (You should back up your documents first, even if you plan to reinstall without reformatting.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do want to try to fix the system in place, then look at the package manager's log files to see what packages were removed, and reinstall them:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/var/log/dpkg.log&lt;/code&gt; (full information, but hard to read)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/var/log/apt/history.log&lt;/code&gt; (abbreviated by will tell you every package&#xA;removed or otherwise modified - likely your best bet)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/var/log/apt/term.log&lt;/code&gt; (if you removed the packages with apt-get in&#xA;the terminal, this should show what you saw then, including lists of&#xA;what packages were going to be removed - so this might be the best&#xA;way)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Blatantly stolen from &lt;a href=&quot;https://askubuntu.com/a/249372&quot;&gt;https://askubuntu.com/a/249372&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="533" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-15T04:09:00.890" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="656" PostTypeId="2" ParentId="652" CreationDate="2015-07-22T03:36:33.100" Score="7" Body="&lt;p&gt;You can test to see if your mouse is broken by running the following in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xev | grep ButtonRelease&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll see a white box with a black square in it. Click the square. Each time you click you will see a line in your terminal window. Ensure that your mouse is only clicking once. &lt;/p&gt;&#xA;" OwnerUserId="533" LastActivityDate="2015-07-22T03:36:33.100" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="657" PostTypeId="1" AcceptedAnswerId="679" CreationDate="2015-07-22T05:05:42.833" Score="14" ViewCount="233" Body="&lt;p&gt;It is usually one of the most important system applications (if not the most important one) in an operating system, so it seems logical to me to have it pinned to the dock (plank) every time. I was wondering why this design decision was made.&lt;/p&gt;&#xA;" OwnerUserId="146" LastEditorUserId="26" LastEditDate="2015-09-03T10:18:50.737" LastActivityDate="2015-09-03T10:18:50.737" Title="Why isn't Files pinned to the dock by default?" Tags="|plank|design|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="658" PostTypeId="1" CreationDate="2015-07-22T06:07:09.067" Score="12" ViewCount="16565" Body="&lt;p&gt;I am trying to use the FiraMono font. I downloaded the &lt;code&gt;.otf&lt;/code&gt; files and saved it in the &lt;code&gt;~/.fonts&lt;/code&gt; directory and also ran &lt;code&gt;fc-cache -vf ~/.fonts&lt;/code&gt; to update the cache.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, when I open elementary tweaks, I don't see it listed in the fonts. What am I missing?&lt;/p&gt;&#xA;" OwnerUserId="534" LastEditorUserId="45" LastEditDate="2015-07-24T01:28:55.917" LastActivityDate="2015-09-16T06:04:56.990" Title="How do I install and use custom fonts?" Tags="|fonts|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="659" PostTypeId="2" ParentId="320" CreationDate="2015-07-22T06:12:27.473" Score="1" Body="&lt;p&gt;I solved a similar problem for a hp printer by installing the latest driver directly from the hp homepage. It seems like canon is offering a driver for the &quot;Canon i-SENSYS LBP2900&quot; which could be similar enough to work. &lt;a href=&quot;http://www.canon.de/support/consumer_products/products/printers/laser/i-sensys_lbp2900.aspx?type=drivers&amp;amp;language=&amp;amp;os=Linux%20(64-bit)#&quot; rel=&quot;nofollow&quot;&gt;Link to German support site&lt;/a&gt;&#xA;Unfortunately, I was unable to find the same link on the English support site so. Give it a try.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-07-22T06:12:27.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="660" PostTypeId="2" ParentId="658" CreationDate="2015-07-22T06:44:35.700" Score="13" Body="&lt;p&gt;They should be placed in the following folders&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For personal use&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TTF files in &lt;code&gt;~/.local/share/fonts/truetype&lt;/code&gt; (old way was &lt;code&gt;~/.fonts/truetype&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OTF files in &lt;code&gt;~/.local/share/fonts/type1&lt;/code&gt; (old way was &lt;code&gt;~/.fonts/type1&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For system wide use&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TTF files in &lt;code&gt;/usr/local/share/fonts/truetype&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OTF files in &lt;code&gt;/usr/local/share/fonts/type1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then &lt;code&gt;sudo fc-cache&lt;/code&gt; and you should see the fonts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative way is to place fonts generally in &lt;code&gt;~/.local/share/fonts/&lt;/code&gt; (old way was &lt;code&gt;~/.fonts/&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you see the new fonts in Libre Office or similar office programs?&lt;/p&gt;&#xA;" OwnerUserId="282" LastActivityDate="2015-07-22T06:44:35.700" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="662" PostTypeId="2" ParentId="654" CreationDate="2015-07-22T08:02:43.453" Score="1" Body="&lt;p&gt;I did something very similar but with a different command. I reinstalled all the deleted packages and everything worked again for me. If yours is anything like mine, you shouldn't have to reinstall. I would recommend backing up data before rebooting though just in case. &lt;/p&gt;&#xA;" OwnerUserId="539" LastActivityDate="2015-07-22T08:02:43.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="664" PostTypeId="2" ParentId="649" CreationDate="2015-07-22T10:26:03.793" Score="1" Body="&lt;p&gt;&lt;strong&gt;Additional Alternatives&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/651/137&quot;&gt;Lewis&lt;/a&gt; already mentioned Gnash and LightSpark. If you are a Firefox user I would suggest also keeping an eye on Mozillas &lt;a href=&quot;https://github.com/mozilla/shumway&quot; rel=&quot;nofollow&quot;&gt;Shumway&lt;/a&gt; project.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you &lt;em&gt;really really&lt;/em&gt; can't avoid using the proprietary version of flash (for sites utilising DRM etc.) the simplest way unfortunately is to use Google Chrome as it comes bundled with an up to date version maintained by Adobe/Google by way of a PPAPI plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For those of us using browsers only supporting older NSAPI plugins (Firefox, Midori etc.) there is a wrapper for Googles plugin called &lt;a href=&quot;https://github.com/i-rinat/freshplayerplugin&quot; rel=&quot;nofollow&quot; title=&quot;Fresh Player Plugin&quot;&gt;Fresh Player Plugin&lt;/a&gt;. Installing it used to be rather difficult, though there are several PPAs including it nowadays.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-07-22T10:26:03.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="665" PostTypeId="2" ParentId="560" CreationDate="2015-07-22T10:50:29.773" Score="6" Body="&lt;p&gt;As the previous posts mentioned you can very well create own shortcut for Slingshot manually but it is worth to mention that there is good, working software to do it with gui, as well as manage your application shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The software is called Main Menu (alacarte) and can be downloaded from ubuntu repositories.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/oY4on.png&quot; alt=&quot;Main Menu (alacarte)&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You can add new shortcuts by clicking New Item and entering path to the software in the Command field.&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other that I can suggest trying out is called MenuLibre&#xA;Project site: &lt;a href=&quot;https://smdavis.us/projects/menulibre/&quot; rel=&quot;noreferrer&quot;&gt;https://smdavis.us/projects/menulibre/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can be installed from MenuLibre Developer's stable repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:menulibre-dev/devel&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xAhB5.jpg&quot; alt=&quot;MenuLibre&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="374" LastEditorUserId="374" LastEditDate="2015-07-22T10:57:06.797" LastActivityDate="2015-07-22T10:57:06.797" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="666" PostTypeId="1" AcceptedAnswerId="667" CreationDate="2015-07-22T15:03:56.103" Score="1" ViewCount="271" Body="&lt;p&gt;Some time ago there was a &lt;em&gt;very&lt;/em&gt; &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1361119&quot; rel=&quot;nofollow noreferrer&quot;&gt;serious issue&lt;/a&gt; where using &lt;code&gt;autoremove&lt;/code&gt; would render your system pretty much useless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This issue is marked as &lt;code&gt;Fix released&lt;/code&gt; but just to be safe I'll ask here anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yesterday I almost bork my Freya (see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/654/did-i-just-destroy-my-freya&quot;&gt;Did I just destroy my Freya?&lt;/a&gt;). It seems to be working fine so far (haven't restarted yet though), the only thing I'm hesitant about is doing an &lt;code&gt;apt-get autoremove&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now these are the packages it wants to remove:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  freeglut3 gir1.2-peas-1.0 gtk3-engines-unico libandroid-properties1&#xA;  libboost-program-options1.54.0 libcapnp-0.4.0 libcolumbus1&#xA;  libcolumbus1-common libdbus-cpp2 libdbusmenu-qt5 libdee-qt5-3 libgflags2&#xA;  libglewmx1.10 libgoogle-glog0 libgrip0 libgsettings-qt1 libhud-client2&#xA;  libhud2 libhybris-common1 libjsoncpp0 liblttng-ust-ctl2 liblttng-ust0&#xA;  libmediascanner-2.0-0 libmirclient7 libmirclientplatform-mesa libmirplatform&#xA;  libmirplatformgraphics-mesa libmirprotobuf0 libmirserver18 libnux-4.0-0&#xA;  libnux-4.0-common libpocketsphinx1 libprocess-cpp1 libprotobuf8&#xA;  libqdjango-db0 libqmenumodel0 libqt5core5a libqt5dbus5 libqt5feedback5&#xA;  libqt5gui5 libqt5multimedia5 libqt5network5 libqt5organizer5&#xA;  libqt5qml-graphicaleffects libqt5qml5 libqt5quick5 libqt5sql5&#xA;  libqt5sql5-sqlite libqt5svg5 libqt5widgets5 libqt5xmlpatterns5&#xA;  libsphinxbase1 libthumbnailer0 libtimezonemap1&#xA;  libubuntu-application-api-mirserver1 libubuntu-location-service0&#xA;  libubuntu-platform-hardware-api1 libunity-action-qt1 libunity-api0&#xA;  libunity-control-center1 libunity-mir1 libunity-scopes1 libunwind8&#xA;  libupstart-app-launch2 liburcu1 libxcb-icccm4 libxcb-image0&#xA;  libxcb-render-util0 libxcb-xkb1 libxkbcommon-x11-0 libzmqpp3&#xA;  linux-headers-3.13.0-53 linux-headers-3.13.0-53-generic&#xA;  linux-headers-3.16.0-34 linux-headers-3.16.0-34-generic&#xA;  linux-headers-generic-lts-utopic linux-image-3.13.0-53-generic&#xA;  linux-image-3.16.0-34-generic linux-image-extra-3.13.0-53-generic&#xA;  linux-image-extra-3.16.0-34-generic linux-image-generic-lts-utopic&#xA;  linux-signed-image-3.13.0-53-generic mediascanner2.0 python-colorama&#xA;  python-distlib python-html5lib python-opengl python-wheel python3-apparmor&#xA;  python3-libapparmor qmenumodel-qml qtdeclarative5-dee-plugin&#xA;  qtdeclarative5-gsettings1.0 qtdeclarative5-qtfeedback-plugin&#xA;  qtdeclarative5-qtquick2-plugin&#xA;  qtdeclarative5-ubuntu-settings-components-assets&#xA;  qtdeclarative5-ubuntu-thumbnailer0.1 qtdeclarative5-unity-action-plugin&#xA;  qtdeclarative5-unity-notifications-plugin qtdeclarative5-window-plugin&#xA;  qtdeclarative5-xmllistmodel-plugin session-migration sqlite3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Here's the full &lt;a href=&quot;http://pastebin.com/zfRQ7bzj&quot; rel=&quot;nofollow noreferrer&quot;&gt;output&lt;/a&gt; of &lt;code&gt;$ apt-get -s autoremove&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I safely run &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; or will removing some of these packages break my system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add: I'm running Freya and my kernel version (&lt;code&gt;uname -r&lt;/code&gt;) is &lt;code&gt;3.16.0-43-generic&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-22T15:33:50.633" Title="Can I trust 'apt-get autoremove' to not make Freya useless?" Tags="|release-freya|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="667" PostTypeId="2" ParentId="666" CreationDate="2015-07-22T15:33:50.633" Score="3" Body="&lt;p&gt;Good news is it doesn't want to remove the kernel, Most of those dependencies are qt related, so no impact on the system, the python ones shouldn't be very problematic, were you running an unity install? Too many unity/mir related things there. I would set these to manually installed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gtk3-engines-unico linux-image-generic-lts-utopic&#xA; linux-headers-generic-lts-utopic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should ensure you keep getting kernel updates and gtk3-engines-unico may be needed by some themes (which you may or may not have installed).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Take with grain of salt as I don't know what applications you have installed in your system which may break after removing these dependencies, still, it won't happen like the last autoremove craze that removed network managers and the like&lt;/em&gt; &lt;/p&gt;&#xA;" OwnerUserId="19" LastActivityDate="2015-07-22T15:33:50.633" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="668" PostTypeId="1" AcceptedAnswerId="670" CreationDate="2015-07-22T12:26:55.590" Score="2" ViewCount="107" Body="&lt;p&gt;My systems volume gets muted automatically when I plug in the headphones but works perfectly ok when they are unplugged. I am using elemantary OS. Please help me to sought out the problem.&lt;/p&gt;&#xA;" OwnerUserId="580" OwnerDisplayName="Charu" LastEditorUserId="242" LastEditDate="2015-07-22T17:03:17.750" LastActivityDate="2015-07-22T17:03:17.750" Title="Volume of system gets muted automatically" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="669" PostTypeId="1" CreationDate="2015-07-22T08:46:27.430" Score="1" ViewCount="544" Body="&lt;p&gt;I'd like to install VMware Player on Freya, but got the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sam@samlaptop:~/Downloads$ sudo ./VMware-Player-4.0.6-1035888.x86_64.bundle&#xA;Extracting VMware Installer...done.&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;Attempt to unlock mutex that was not locked&#xA;/tmp/vmis.C8OWKd/install/vmware-installer/vmware-installer: line 22: 9093 Aborted (core dumped) VMWARE_INSTALLER=&quot;$VMWARE_INSTALLER&quot; VMISPYVERSION=&quot;$VMISPYVERSION&quot; &quot;$VMWARE_INSTALLER&quot;/vmis-launcher &quot;$VMWARE_INSTALLER&quot;/vmware-installer.py &quot;$@&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="Sreekanth Madhavan" LastEditorUserId="160" LastEditDate="2015-07-23T21:20:44.883" LastActivityDate="2015-08-22T21:42:19.160" Title="Cannot install VMware-Player-4.0.6-1035888.x86_64" Tags="|software-installation|virtualization|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="670" PostTypeId="2" ParentId="668" CreationDate="2015-07-22T17:01:50.407" Score="1" Body="&lt;p&gt;Sounds to me like you need to check your headphone's volume settings.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Plug in your headphones.&lt;/li&gt;&#xA;&lt;li&gt;Open the terminal, and run &lt;code&gt;alsamixer&lt;/code&gt;. You will get something like this:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;[&lt;img src=&quot;https://i.stack.imgur.com/b9pQq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;From here, find the option labelled &quot;Headphones&quot; and, if it reads &quot;MM&quot;, press &quot;&lt;kbd&gt;M&lt;/kbd&gt;&quot; to unmute them. You may also need to raise their volume by pressing the up arrow.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;For good measure, ensure that automute is enabled as well (it most likely is, but still double check).&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-07-22T17:01:50.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="671" PostTypeId="2" ParentId="669" CreationDate="2015-07-22T17:10:18.200" Score="1" Body="&lt;p&gt;Module &lt;code&gt;libcanberra&lt;/code&gt; is obviously missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the module using following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# sudo apt-get install libcanberra-gtk-module&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or if it's already installed and you still get the error it would mean x86 version is needed for compatibility, but it's missing. Install x86 version using following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# sudo apt-get install libcanberra-gtk-module:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="386" LastActivityDate="2015-07-22T17:10:18.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="674" PostTypeId="1" AcceptedAnswerId="675" CreationDate="2015-07-22T17:37:06.833" Score="16" ViewCount="12358" Body="&lt;p&gt;How can I make a backup of the system and then restore it, in case of serious damage or failure? This is possible after a failed experiment.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2017-10-22T14:00:09.627" Title="How to backup and restore the system?" Tags="|system|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="675" PostTypeId="2" ParentId="674" CreationDate="2015-07-22T17:37:06.833" Score="18" Body="&lt;p&gt;You can use &lt;a href=&quot;http://www.teejeetech.in/p/timeshift.html&quot; rel=&quot;noreferrer&quot;&gt;TimeShift&lt;/a&gt; for creates system restore point.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;TimeShift for Linux is a application that provides functionality&#xA;  similar to the &lt;em&gt;System Restore&lt;/em&gt; feature in Windows and the &lt;em&gt;Time Machine&lt;/em&gt;&#xA;  tool in Mac OS. TimeShift protects your system by taking incremental&#xA;  snapshots of the file system at regular intervals. These snapshots can&#xA;  be restored later to bring your system to the exact state it was in at&#xA;  the time when the snapshot was taken.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;TimeShift is designed to protect system files and settings. User data such as documents, pictures and music are excluded by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:teejee2008/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install timeshift&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Typically, for use doesn't require any additional settings, just click the &lt;code&gt;Backup&lt;/code&gt; button for create snapshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/46Czo.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/46Czo.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For restore select a backup from the list and click the &lt;code&gt;Restore&lt;/code&gt; button on the toolbar. After, select the system partition from the &lt;em&gt;Restore Window&lt;/em&gt; that is displayed. Click the &lt;code&gt;Restore&lt;/code&gt; button to continue and start the restore process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iyi7F.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iyi7F.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can be enabled for taking automatic snapshots of the system at regular intervals. The backup levels can be selected from the &lt;em&gt;Settings&lt;/em&gt; window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/op448.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/op448.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you can't get into the graphics mode (eg after a failed installation of video driver), you have to use &lt;a href=&quot;https://elementary.io/docs/installation#creating-an-installation-medium&quot; rel=&quot;noreferrer&quot;&gt;Live USB&lt;/a&gt; with elementary OS or Ubuntu. After booting into the live system, run the commands in terminal to install timeshift and follow the general instructions for restore.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-07-22T17:37:06.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="676" PostTypeId="1" AcceptedAnswerId="696" CreationDate="2015-07-22T18:08:15.257" Score="14" ViewCount="17370" Body="&lt;p&gt;It always asks me to put a password in, but I think it is annoying: Is there a way to remove this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried resetting the system settings, but that didn't work, I also tried to find it, but everything online says seahorse and I couldn't find that on elementary OS no matter how much I looked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just looking to change my keyring password or its settings, preferably remove some of them so I don't need to put my password in.&lt;/p&gt;&#xA;" OwnerUserId="301" LastEditorUserId="8517" LastEditDate="2019-03-17T00:45:05.453" LastActivityDate="2022-05-15T15:05:52.920" Title="How to change or remove keyrings on elementary OS" Tags="|security|keyring|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="677" PostTypeId="1" AcceptedAnswerId="678" CreationDate="2015-07-22T18:15:44.460" Score="5" ViewCount="962" Body="&lt;p&gt;I upgraded Google Chrome to version 44.0.2403.89 and now I see new user menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NaXPM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NaXPM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previously, there was a flag to disable it, but now there isn't. How can I remove this?&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="45" LastEditDate="2015-07-24T01:35:04.643" LastActivityDate="2015-07-24T01:36:59.903" Title="How Can I Disable Chrome's New User Menu?" Tags="|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="678" PostTypeId="2" ParentId="677" CreationDate="2015-07-22T18:15:44.460" Score="10" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy Chrome's .desktop file to your user's local applications folder using Terminal&lt;sup&gt;1&lt;/sup&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/google-chrome.desktop ~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the copied .desktop file with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/applications/google-chrome.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find the line &lt;code&gt;Exec=/usr/bin/google-chrome-stable %U&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Replace it with &lt;code&gt;Exec=/usr/bin/google-chrome-stable --disable-new-avatar-menu %U&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save and close the file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart Google Chrome and enjoy. ;-)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you fixed Chrome's icon in Plank by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/20/160&quot;&gt;this&lt;/a&gt; metod, skip this step.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-24T01:36:59.903" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="679" PostTypeId="2" ParentId="657" CreationDate="2015-07-22T18:49:33.490" Score="6" Body="&lt;p&gt;UX Lead here :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Generally, manual file management is something that's considered to be deprecated. Modern applications manage files very effectively. Oftentimes, attempting to manually manage files that are already being managed by an app can cause issues with that app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take for example Music where deleting a song from inside the app will also remove it from the app's database. However, deleting from the file manager will cause Music to assume that the track is missing and action needs to be taken to resolve a broken path (like mounting an external drive maybe). This is also the case with Photos and someday with Videos etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We also don't include Terminal or our code editor Scratch on the dock. While these kinds of tools are valuable and sometimes necessary, we don't want to present them front-and-center as go-to solutions.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-22T20:33:59.460" LastActivityDate="2015-07-22T20:33:59.460" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="680" PostTypeId="1" CreationDate="2015-07-22T20:34:35.397" Score="5" ViewCount="183" Body="&lt;p&gt;Could you guys take a look at the Wacom issues? On my Fujitsu T4220 &amp;amp; T4210 tablet PC the Wacom works great and the OS runs awesome; but when it comes back from sleep elementary OS says there is no tablet device, I have to reboot to see the Wacom tablet again. It is slightly annoying and has caused me to revert back to Ubuntu 12.04 which runs a LOT slower than elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="546" LastEditorUserId="16827" LastEditDate="2019-01-09T09:55:22.610" LastActivityDate="2019-01-09T09:55:22.610" Title="Wacom issues with the Fujitsu T4220 &amp; T4210 Tablet PC" Tags="|release-freya|system|touchpad|wacom|" AnswerCount="0" CommentCount="7" ClosedDate="2019-04-18T14:51:12.460" ContentLicense="CC BY-SA 4.0" />
  <row Id="681" PostTypeId="2" ParentId="669" CreationDate="2015-07-22T20:37:49.180" Score="1" Body="&lt;p&gt;Is there any reason why you use version 4.x? There is VMware Player 7.x available. Maybe the current version does not make problems. Some months ago I had problems with VMware Workstation and found my solution on askubuntu:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/449629/error-installing-vmware-workstation-on-ubuntu&quot;&gt;https://askubuntu.com/questions/449629/error-installing-vmware-workstation-on-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would give version 7 a try.&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-22T20:37:49.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="683" PostTypeId="1" AcceptedAnswerId="684" CreationDate="2015-07-22T21:11:38.253" Score="6" ViewCount="302" Body="&lt;p&gt;The sound is automatically muted when the system is locked. How can I disable this feature?&lt;/p&gt;&#xA;" OwnerUserId="547" LastEditorUserId="45" LastEditDate="2015-08-01T00:47:53.497" LastActivityDate="2020-12-10T19:40:57.720" Title="Sound muted when system locked" Tags="|sound|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="684" PostTypeId="2" ParentId="683" CreationDate="2015-07-22T21:22:00.883" Score="2" Body="&lt;p&gt;This behaviour is undesirable but unavoidable. It is a result of X, where a new tty is used when locked. Wayland will supposedly fix it.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-22T21:22:00.883" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="685" PostTypeId="2" ParentId="658" CreationDate="2015-07-22T21:25:21.847" Score="2" Body="&lt;p&gt;I followed the instructions provided &lt;a href=&quot;http://linuxg.net/how-to-install-the-fira-sans-3-1-and-fira-mono-3-1-on-ubuntu-linux-mint-elementary-os-pinguy-os-and-elementary-os-systems/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. This is what I did to have it working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Created the FiraSans directory in /usr/share/fonts/truetype&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mkdir -p /usr/share/fonts/truetype/FiraSans&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Moved the ttf font files to that directory and then updated the cache&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo fc-cache -f -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Initially, I did try with the OTF files and later moved to TTF files. I don't think that made the difference but just FYI.&lt;/p&gt;&#xA;" OwnerUserId="534" LastEditorUserId="534" LastEditDate="2015-07-23T22:56:57.223" LastActivityDate="2015-07-23T22:56:57.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="687" PostTypeId="1" CreationDate="2015-07-22T22:14:32.220" Score="6" ViewCount="3784" Body="&lt;p&gt;How can I fix it ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chrome button doesn't match the theme button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zRLhb.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zRLhb.png&quot; alt=&quot;chromebuttonfix&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="495" LastEditorUserId="45" LastEditDate="2015-07-22T22:43:39.483" LastActivityDate="2015-07-24T16:13:57.910" Title="How can I make Chrome use the window button icons from the system style sheet?" Tags="|themes|google-chrome|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="688" PostTypeId="2" ParentId="687" CreationDate="2015-07-22T23:02:05.693" Score="5" Body="&lt;p&gt;Have you tried Google Settings (=) -&gt; Settings -&gt; Search GTK Theme and clicked that button?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also try using that &quot;Use system title bar and borders&quot; checkbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/meE9U.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/meE9U.png&quot; alt=&quot;Settings after searching&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="548" LastActivityDate="2015-07-22T23:02:05.693" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="691" PostTypeId="1" CreationDate="2015-07-22T23:54:36.183" Score="2" ViewCount="246" Body="&lt;p&gt;I have a problem with elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer has one of its speakers broken, so I have the sound balance totally on one side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't modify the sound level trough notification area when I have the sound balance like that. It fails, doesn't let me to do nothing because the indicator is shown at 0, and if I try to modify it turns back automatically to 0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does this have a solution?&lt;/p&gt;&#xA;" OwnerUserId="549" LastEditorUserId="9" LastEditDate="2015-07-23T10:35:01.210" LastActivityDate="2015-07-23T10:35:01.210" Title="Sound icon problem" Tags="|notification-badge|sound|" AnswerCount="1" CommentCount="2" ClosedDate="2015-07-23T12:34:54.770" ContentLicense="CC BY-SA 3.0" />
  <row Id="692" PostTypeId="2" ParentId="691" CreationDate="2015-07-23T04:21:13.900" Score="3" Body="&lt;p&gt;This sounds like a &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-sound/+bug/1451110&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug&lt;/a&gt; in &lt;em&gt;wingpanel-sound-indicator&lt;/em&gt;. I recommend marking that bug as &lt;em&gt;'affecting me'&lt;/em&gt; or opening another on the &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-sound&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug tracker&lt;/a&gt; if yours is in fact different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the meantime you could try remapping your stereo output to mono by following one of &lt;a href=&quot;https://superuser.com/questions/657876/mono-sound-output-in-ubuntu&quot;&gt;these&lt;/a&gt; examples.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2015-07-23T04:31:24.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="693" PostTypeId="2" ParentId="602" CreationDate="2015-07-23T07:02:18.187" Score="1" Body="&lt;p&gt;Could you check these points:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;OS dependent?&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;From the system monitor, is the OS working slowly after it is plugged into the current monitor?&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Hardware&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Try to switch a monitor to see if it happens.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Software &#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Try to use different drivers provided in&#xA;Ubuntu/elementary OS repositories. &lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;User Settings&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Does the graphics refresh normally?&lt;/li&gt;&#xA;&lt;li&gt;Is the frequency the right one? Try to switch it.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Not sure whether it is an elementary OS bug or not. Anyway, my Dell&#xA;computer works really fine when working with an external&#xA;monitor.&lt;/p&gt;&#xA;" OwnerUserId="517" LastEditorUserId="34" LastEditDate="2015-07-24T10:15:03.653" LastActivityDate="2015-07-24T10:15:03.653" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="694" PostTypeId="1" AcceptedAnswerId="723" CreationDate="2015-07-23T07:16:46.633" Score="2" ViewCount="84" Body="&lt;p&gt;I have updated elementary OS one hour ago and I noticed really weird visual behavior with some elements. In Chrome, most of the times my context menu is black, but not always. When opening a new tab the bookmarks line is black.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before the update everything was perfect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;: Looks like the problem is only in Google Chrome&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yDKzS.jpg&quot; alt=&quot;enter image description here&quot;&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4nYQs.jpg&quot; alt=&quot;enter image description here&quot;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/vqxPI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="369" LastEditorUserId="34" LastEditDate="2015-07-24T10:14:33.400" LastActivityDate="2015-07-24T14:07:03.690" Title="Visual problems after today's update (23 Jul 2015)" Tags="|graphic-drivers|updates|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="695" PostTypeId="1" CreationDate="2015-07-23T07:34:15.010" Score="2" ViewCount="2444" Body="&lt;p&gt;After installing elementary OS I rebooted the PC and saw blinking black screen. I tried &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;, but it is not working. Even the flash drive with OS is not working.&lt;/p&gt;&#xA;" OwnerUserId="550" LastEditorUserId="26" LastEditDate="2016-01-30T12:58:45.070" LastActivityDate="2016-08-04T09:17:13.970" Title="How do I fix having nothing but a blinking black screen after installation?" Tags="|system-installation|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="696" PostTypeId="2" ParentId="676" CreationDate="2015-07-23T10:22:01.683" Score="11" Body="&lt;h3&gt;Option 1: Manage with Seahorse&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Typically, matching your keyring password to your login password will unlock your keyring at logon (unless the logon is automatic). You can install the management application &lt;code&gt;seahorse&lt;/code&gt; to modify your keyring password to match.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install seahorse&#xA;seahorse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Option 2: Delete the Keyring&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you're not concerned about losing any existing saved passwords, you can just delete the keyring. The next time you are prompted to use it you can create a new one with a password that matches your logon.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/.local/share/keyrings/login.keyring&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2016-11-28T08:27:03.190" LastActivityDate="2016-11-28T08:27:03.190" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="697" PostTypeId="1" CreationDate="2015-07-23T10:59:06.247" Score="6" ViewCount="1101" Body="&lt;p&gt;How can I activate the new open file dialog in files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://lmelinux.net/2015/05/05/new-open-file-dialog-coming-to-freya-soon/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://lmelinux.net/2015/05/05/new-open-file-dialog-coming-to-freya-soon/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As shown below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2dxDe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2dxDe.png&quot; alt=&quot;Open file dialog screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="475" LastEditorUserId="45" LastEditDate="2015-09-05T20:11:22.753" LastActivityDate="2015-09-05T20:11:22.753" Title="How can I test the new &quot;Open File&quot; dialog?" Tags="|applications|pantheon-files|testing|" AnswerCount="1" CommentCount="7" ClosedDate="2015-09-05T20:17:38.633" ContentLicense="CC BY-SA 3.0" />
  <row Id="698" PostTypeId="1" AcceptedAnswerId="701" CreationDate="2015-07-23T11:58:54.603" Score="7" ViewCount="4774" Body="&lt;p&gt;I am a Malaysian and so my location is Malaysia but I want to change the language of the date-time in the &lt;strong&gt;login page&lt;/strong&gt; to English instead of Malay? Any idea?&lt;/p&gt;&#xA;" OwnerUserId="551" LastEditorUserId="4688" LastEditDate="2016-04-07T17:41:51.290" LastActivityDate="2018-03-03T02:14:25.440" Title="How to change the language of the date-time in the login page?" Tags="|greeter|language|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="699" PostTypeId="2" ParentId="697" CreationDate="2015-07-23T12:25:51.707" Score="8" Body="&lt;h3&gt;Enable it everywhere&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;As cipricus said, the dialog is already implemented in the system. If you want to enable it now, you need to have your system &lt;em&gt;up-to-date&lt;/em&gt; and execute this command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings enabled-gtk-modules &quot;['pantheon-filechooser-module']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, &lt;strong&gt;be sure to reboot your system&lt;/strong&gt; and the new dialog should appear.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Reset&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;To disable that if you encounter problems execute and reboot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings enabled-gtk-modules &quot;[]&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="553" LastEditorUserId="26" LastEditDate="2015-07-23T12:29:04.693" LastActivityDate="2015-07-23T12:29:04.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="701" PostTypeId="2" ParentId="698" CreationDate="2015-07-23T12:35:01.847" Score="6" Body="&lt;p&gt;This should work but it's more of a workaround than solution and I haven't personally tested it. Try changing your language to English in Settings and then use button &quot;Apply to login screen, guest account and new users&quot;. Later on change back to Malay on your account and don't use the option to apply Malay to login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The result should be English as system wide and Malay as local user language, meaning that whole login screen, including date will be in English. &lt;/p&gt;&#xA;" OwnerUserId="374" LastActivityDate="2015-07-23T12:35:01.847" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="702" PostTypeId="5" CreationDate="2015-07-23T12:49:29.653" Score="0" Body="&lt;h1&gt;Plank (&lt;em&gt;Modified for elementary&lt;/em&gt;)&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Modified plank which ships by default with elementary and has some advanced features such as tight integration with slingshot, hidden preferences, themability and folders(stacks).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zMsY9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zMsY9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="179" LastEditDate="2015-07-23T18:21:25.940" LastActivityDate="2015-07-23T18:21:25.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="703" PostTypeId="4" CreationDate="2015-07-23T12:49:29.653" Score="0" Body="Questions related to elementary's default dock" OwnerUserId="179" LastEditorUserId="179" LastEditDate="2015-07-23T18:21:06.820" LastActivityDate="2015-07-23T18:21:06.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="704" PostTypeId="2" ParentId="687" CreationDate="2015-07-23T14:19:15.123" Score="0" Body="&lt;p&gt;Right click in the Chrome title bar and select &quot;use system icons&quot;.&lt;/p&gt;&#xA;" OwnerUserId="533" LastActivityDate="2015-07-23T14:19:15.123" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="705" PostTypeId="1" AcceptedAnswerId="706" CreationDate="2015-07-23T14:52:59.170" Score="4" ViewCount="157" Body="&lt;p&gt;I have been using elementary OS for a while and I have noticed there is slight difference in the styles of different Apps. For example the menu in Firefox is like this : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/N1h9k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/N1h9k.png&quot; alt=&quot;Firefox Menu screenshot&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note: - I have configured the icons to show with entries&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whereas the menu of the Files (&lt;code&gt;pantheon-files&lt;/code&gt;) looks like this : - &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9vUKt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9vUKt.png&quot; alt=&quot;Files menu screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How and why is this difference?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to have the Files styled menu in Firefox? Why not?&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="45" LastEditDate="2015-09-01T17:27:43.947" LastActivityDate="2015-09-01T17:27:43.947" Title="Why do I get differently styled menus in different applications?" Tags="|themes|menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="706" PostTypeId="2" ParentId="705" CreationDate="2015-07-23T15:47:26.313" Score="12" Body="&lt;p&gt;The problem you're noticing is that some 3rd party apps use different &lt;a href=&quot;https://en.wikipedia.org/wiki/Widget_toolkit&quot;&gt;&lt;em&gt;widget toolkits&lt;/em&gt;&lt;/a&gt;. In a nutshell, the toolkit is the component that contains the instructions for how certain interface elements should look and behave.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All elementary apps use the Gtk+ 3 toolkit. Firefox uses a toolkit called XUL. By default, it tries to imitate the look of the older Gtk+ 2, which is still used by some popular apps like Gimp.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I'm sure it's probably possibly to apply themes to Firefox to make it imitate Gtk+ 3, you should be aware that there will most likely be inherent inconsistencies from using a different toolkit.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-23T18:44:40.457" LastActivityDate="2015-07-23T18:44:40.457" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="707" PostTypeId="1" AcceptedAnswerId="721" CreationDate="2015-07-23T15:47:34.123" Score="2" ViewCount="235" Body="&lt;p&gt;Computer: Acer Aspire 4752&#xA;Intel core i3-2330M, 6GB RAM,500GB HDD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the 64-bit elementary OS Luna with the following disk partitions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;/dev/sda1(400GB) as /home&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda2(30GB) as /root&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda3(5gb) as swap&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda4 as boot(efi?)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Rest as unallocated space, I installed elementary OS Freya (64bit) using the &quot;something else&quot; option and leaving my home partition &lt;strong&gt;as is&lt;/strong&gt;. Now when I boot I am stuck at this screen: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/wUerC.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the manual recovery but can't get any further than this: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sq7ia.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I tried pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt;, the black screen then says &lt;code&gt;Warning : Fake initcl called&lt;/code&gt;, doing nothing . Well, nothing happens and I have to force shutdown, running &lt;code&gt;startx&lt;/code&gt; doesn't help either just a completely blank screen appears. This is my primary computer and I don't have anything to backup my data to, any solution which doesn't have the risk of loosing my data would save my day.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I used the same username and login password as before. Now would be investing in an external HDD.&lt;/p&gt;&#xA;" OwnerUserId="555" LastEditorUserId="34" LastEditDate="2015-07-24T10:14:22.450" LastActivityDate="2015-07-24T11:45:42.623" Title="Can not mount old encrypted home partition" Tags="|release-freya|startup|boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="708" PostTypeId="2" ParentId="18" CreationDate="2015-07-23T16:22:21.890" Score="-3" Body="&lt;p&gt;A work around is installing Google-chrome-beta no problem with that one also a little newer features &lt;/p&gt;&#xA;" OwnerUserId="301" LastActivityDate="2015-07-23T16:22:21.890" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="711" PostTypeId="1" AcceptedAnswerId="714" CreationDate="2015-07-24T01:54:12.390" Score="17" ViewCount="10248" Body="&lt;p&gt;When I boot my laptop, Bluetooth is on by default:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2E7h9.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2E7h9.png&quot; alt=&quot;bluetooth on upon startup&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to set it to instead be off when I start up my laptop?:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q625m.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q625m.png&quot; alt=&quot;bluetooth off&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="277" LastEditorUserId="45" LastEditDate="2015-07-24T03:34:28.930" LastActivityDate="2018-03-31T21:18:39.097" Title="Turn off bluetooth by default on start up" Tags="|release-freya|startup|bluetooth|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="712" PostTypeId="1" AcceptedAnswerId="743" CreationDate="2015-07-24T02:04:27.270" Score="11" ViewCount="11819" Body="&lt;p&gt;How do I change the behavior of the &lt;kbd&gt;PrntScrn&lt;/kbd&gt;-key such that it launches the Screenshot application?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The default behavior for the &lt;kbd&gt;PrntScrn&lt;/kbd&gt;-key on my computer is to take a screen shot of the whole screen, but I'd like Screenshot Application to launch so I can choose which part of the screen to capture.&lt;/p&gt;&#xA;" OwnerUserId="277" LastEditorUserId="22" LastEditDate="2015-07-25T07:34:35.777" LastActivityDate="2018-11-21T07:34:29.843" Title="How to launch Screenshot by typing the PrintScreen key?" Tags="|keyboard-shortcuts|screenshot|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="713" PostTypeId="1" AcceptedAnswerId="882" CreationDate="2015-07-24T02:22:34.477" Score="0" ViewCount="928" Body="&lt;p&gt;I tried to uninstall Vivaldi Web Browser but I am getting this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-icon-resource: size argument must be numeric&#xA;Try 'xdg-icon-resource --help' for more information.&#xA;dpkg: error processing package vivaldi-preview (--purge):&#xA; subprocess installed pre-removal script returned error exit status 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I deleted a folder as admin user using the pantheon-files. I think this may be the problem. But I don't know how to fix it.&#xA;And now I can't uninstall anything because the following error happens:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Try 'xdg-icon-resource --help' for more information.&#xA;dpkg: error processing package vivaldi-preview (--configure):&#xA; subprocess installed post-installation script returned error exit status 1&#xA;Errors were encountered while processing:&#xA; vivaldi-preview&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="304" LastEditorUserId="26" LastEditDate="2015-07-25T07:40:16.397" LastActivityDate="2016-02-01T23:21:28.507" Title="Can't uninstall Anything, how do I fix this?" Tags="|applications|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="714" PostTypeId="2" ParentId="711" CreationDate="2015-07-24T04:54:26.760" Score="10" Body="&lt;p&gt;At @Life's suggestion, I checked out &lt;a href=&quot;http://itsfoss.com/turn-off-bluetooth-by-default-in-ubuntu-14-04&quot; rel=&quot;noreferrer&quot;&gt;this post&lt;/a&gt;.  The solution was quite easy and worked like a charm (Thanks, @Life!).  In the terminal, I typed &lt;code&gt;sudo nano /etc/rc.local&lt;/code&gt; which opened that file in the nano text editor.  Then, above the &lt;code&gt;exit 0&lt;/code&gt; line, I added &lt;code&gt;rfkill block bluetooth&lt;/code&gt;, like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/57puQ.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/57puQ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After saving and exiting nano (Ctrl-X, Y, Enter), then restarting my computer to test it out, bluetooth is no longer on by default.&lt;/p&gt;&#xA;" OwnerUserId="277" LastActivityDate="2015-07-24T04:54:26.760" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="716" PostTypeId="1" AcceptedAnswerId="717" CreationDate="2015-07-24T06:06:42.367" Score="10" ViewCount="16754" Body="&lt;p&gt;How can I install JDK 8? Is it possible to install it from PPA? &lt;/p&gt;&#xA;" OwnerUserId="472" LastActivityDate="2017-09-26T16:55:44.807" Title="How do I install Oracle Java JDK 8 on Freya?" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="717" PostTypeId="2" ParentId="716" CreationDate="2015-07-24T06:11:19.283" Score="13" Body="&lt;p&gt;You can install it from PPA :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install python-software-properties&#xA;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt-get update&#xA;sudo apt-get install oracle-java8-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or download it from &lt;a href=&quot;http://www.oracle.com/technetwork/java/javase/downloads/index.html&quot;&gt;here&lt;/a&gt; then move &lt;code&gt;jdk-8*&lt;/code&gt; to &lt;code&gt;/usr/lib/jvm/jdk1.8.x&lt;/code&gt; then run these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --install &quot;/usr/bin/java&quot; &quot;java&quot; &quot;/usr/lib/jvm/jdk1.8.x/bin/java&quot; 1&#xA;sudo update-alternatives --install &quot;/usr/bin/javac&quot; &quot;javac&quot; &quot;/usr/lib/jvm/jdk1.8.x/bin/javac&quot; 1&#xA;sudo update-alternatives --install &quot;/usr/bin/javaws&quot; &quot;javaws&quot; &quot;/usr/lib/jvm/jdk1.8.x/bin/javaws&quot; 1&#xA;sudo chmod a+x /usr/bin/java&#xA;sudo chmod a+x /usr/bin/javac&#xA;sudo chmod a+x /usr/bin/javaws&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;x&lt;/code&gt; in &lt;code&gt;1.8.x&lt;/code&gt; means the latest version of JDK 8&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="47" LastEditDate="2015-07-24T06:19:10.617" LastActivityDate="2015-07-24T06:19:10.617" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="718" PostTypeId="2" ParentId="713" CreationDate="2015-07-24T06:42:40.330" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You can try reinstalling vivaldi-preview and then remove / purge it. This should recreate whatever folder you deleted.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall vivaldi-preview&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can try running forced purge &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -P --force-all vivaldi-preview&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can combine it and run forced remove with reinstall required&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --force-remove-reinstreq --remove vivaldi-preview&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can try editing /etc/init.d/vivaldi-preview to fool dpkg that post-installation script did some job and returned success&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="374" LastEditorUserId="26" LastEditDate="2016-02-01T23:21:28.507" LastActivityDate="2016-02-01T23:21:28.507" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="719" PostTypeId="2" ParentId="712" CreationDate="2015-07-24T09:00:05.557" Score="0" Body="&lt;p&gt;Go to &lt;em&gt;System settings&lt;/em&gt; --&gt; &lt;em&gt;Keyboard&lt;/em&gt; --&gt; add custom shortcut of &lt;code&gt;printscreen&lt;/code&gt; select screenshot app and done.&lt;/p&gt;&#xA;" OwnerUserId="523" LastEditorUserId="2708" LastEditDate="2015-12-11T06:58:41.817" LastActivityDate="2015-12-11T06:58:41.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="720" PostTypeId="1" CreationDate="2015-07-24T09:25:39.597" Score="5" ViewCount="832" Body="&lt;p&gt;When adjusting the brightness or volume, the pop up on the top right has a white sun and audio icon, which makes it look invisible, as compared as the default, where the icons are black. Is there was any way to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In addition, in the wingpanel, the rightmost icon does not exactly fit the theme of all the other icons. Like my previous question, is there anyway I can use the default elementary icons for Wingpanel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/X9eL0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X9eL0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="877" LastEditorUserId="45" LastEditDate="2015-07-26T15:25:52.133" LastActivityDate="2015-07-26T15:25:52.133" Title="How can I adjust individual icons in the Moka icon theme?" Tags="|release-freya|themes|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="721" PostTypeId="2" ParentId="707" CreationDate="2015-07-24T11:45:42.623" Score="0" Body="&lt;p&gt;I managed to &lt;em&gt;solve&lt;/em&gt; my issue by re-installing and &lt;strong&gt;not&lt;/strong&gt; using swap at all, as I have a 6GB of physical memory.The encrypted home partition is now mounted by default and everything works fine barring a few glitches here and there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I now am facing entirely new issues related to lightdm and elementary desktop which require a new question.&#xA;It's not &lt;em&gt;actually&lt;/em&gt; a solution because the problem I had was rather interesting might have taught something new to me.&lt;/p&gt;&#xA;" OwnerUserId="555" LastActivityDate="2015-07-24T11:45:42.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="722" PostTypeId="1" CreationDate="2015-07-24T12:11:55.263" Score="2" ViewCount="859" Body="&lt;p&gt;I had an issue while trying the live version of &lt;strong&gt;elementary OS Freya&lt;/strong&gt;: My touchpad (an &lt;strong&gt;alps touchpad&lt;/strong&gt;) won't work as a touchpad really but is &lt;strong&gt;recognized as a mouse&lt;/strong&gt;, so I &lt;strong&gt;can't use gestures&lt;/strong&gt; for example two finger scroll. In my opinion this is a problem related to drivers, but every solution I've found on the internet has not worked for me. &#xA;Can I make it work in some way? It's the only reason that restrains me from switching from Windows to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additional informations that may help:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the laptop is HP stream 14&lt;/li&gt;&#xA;&lt;li&gt;CPU is AMD APU 6500 micro-T&lt;/li&gt;&#xA;&lt;li&gt;integrated radeon R3 graphics&lt;/li&gt;&#xA;&lt;li&gt;alps touchpad&lt;/li&gt;&#xA;&lt;li&gt;windows 8.1 currently installed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="566" LastEditorUserId="34" LastEditDate="2015-07-24T15:24:04.103" LastActivityDate="2015-07-28T22:09:27.520" Title="Alps touchpad not recognized" Tags="|release-freya|system|mouse|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="723" PostTypeId="2" ParentId="694" CreationDate="2015-07-24T14:07:03.690" Score="1" Body="&lt;p&gt;I too see this black menu on Chrome but only for a second.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It happened after I switched video drivers from Nouveau to proprietary (Nvidia-331).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try accessing 'Additional controllers' or 'Additional drivers' (howewer it is called in english) and select a different driver.&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2015-07-24T14:07:03.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="724" PostTypeId="1" CreationDate="2015-07-24T14:10:50.313" Score="6" ViewCount="23525" Body="&lt;p&gt;I'm having difficulties installing elementary OS Freya in UEFI mode. My BIOS supports both legacy and UEFI. With other Ubuntu distros my boot menu gives me the option to boot the live CD or usb using legacy or UEFI. With elementary OS it's only giving me the legacy option. I tried downloading a new ISO and it didn't make a difference. Also tried usb and cd. Any help would be appreciated!&lt;/p&gt;&#xA;" OwnerUserId="567" LastEditorUserId="45" LastEditDate="2015-11-29T00:28:45.613" LastActivityDate="2016-08-22T19:29:26.143" Title="Installing in UEFI mode" Tags="|release-freya|system-installation|uefi|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="725" PostTypeId="2" ParentId="695" CreationDate="2015-07-24T14:15:42.583" Score="0" Body="&lt;p&gt;This happened to me, but the OS was actually installed. Try to boot without the USB drive plugged.&lt;/p&gt;&#xA;" OwnerUserId="425" LastActivityDate="2015-07-24T14:15:42.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="726" PostTypeId="2" ParentId="720" CreationDate="2015-07-24T14:44:09.060" Score="5" Body="&lt;p&gt;You can try setting the Moka icon theme to inherit from the elmentary icon theme. Edit the &lt;code&gt;index.theme&lt;/code&gt; file and add &lt;strong&gt;elementary&lt;/strong&gt; to the &lt;code&gt;Inherits&lt;/code&gt; property:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /usr/share/icons/Mako/index.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit the &lt;code&gt;Inherits&lt;/code&gt; property:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Inherits=elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You might have to switch themes, before the changes take affect.&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-07-24T14:44:09.060" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="727" PostTypeId="1" CreationDate="2015-07-24T15:26:44.000" Score="1" ViewCount="115" Body="&lt;p&gt;Can someone please give me a detailed guide of how to install elementary os freya 64bit to dual boot alongside a preinstalled win8.1? I have a sony vaio TSeries laptop. I heard there are many issues with dual boot so I guess I need a detailed course of how to do this. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="568" LastActivityDate="2015-07-25T11:10:52.190" Title="Win8.1 and Freya dual boot" Tags="|dual-boot|" AnswerCount="2" CommentCount="2" ClosedDate="2015-07-24T17:26:50.030" ContentLicense="CC BY-SA 3.0" />
  <row Id="729" PostTypeId="2" ParentId="727" CreationDate="2015-07-24T16:17:52.750" Score="-3" Body="&lt;p&gt;Here is a tutorial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=hOz66FC0pWU&quot; rel=&quot;nofollow&quot;&gt;https://www.youtube.com/watch?v=hOz66FC0pWU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you encounter any problems, install Boot-Repair on elementary livecd or press &quot;try elementary&quot; version.&lt;/p&gt;&#xA;" OwnerUserId="495" LastEditorUserId="495" LastEditDate="2015-07-25T11:10:52.190" LastActivityDate="2015-07-25T11:10:52.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="730" PostTypeId="1" AcceptedAnswerId="746" CreationDate="2015-07-24T16:19:22.540" Score="5" ViewCount="1790" Body="&lt;p&gt;Distro: elementary OS Freya 0.3 (no modifications apart from installing bumblebee and proprietary video drivers)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop: MSI ghost GS60 2PC&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have, for about the last month, been getting messages stating that I am only able to perform partial upgrades when updates have been released.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything was still working fine so I didn't bother to look much further into it. The packages that couldn't be update seemed to be to do with kernel headers and things for 14.10 which I didn't think was relevant to Freya. (I know I maybe completely wrong about this, please feel free to tell me so, but politely please. I am a sensitive soul.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This afternoon I returned home and brought my laptop out of standby. In the taskbar I noticed there was, what appeared to be, a busy icon a la Skype. I clicked it wondering what it might be and was greeted by a message stating that the package lists or status file could not be parsed or opened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to run apt-get update, to which I was informed that there was a 404 on one of my repositories (Lightzone). This didn't seem relevant. I then ran apt-get upgrade and was greeted with this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Error!&#xA;W: Duplicate sources.list entry http://dl.google.com/linux/chrome/deb/stable/main amd64 Packages (/var/lib/apt/lists/dl.google.com_linux_chrome_deb_dists_stable_main_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://dl.google.com/linux/chrome/deb/stable/main i386 Packages (/var/lib/apt/lists/dl.google.com_linux_chrome_deb_dists_stable_main_binary-i386_Packages)&#xA;E: Encountered a section with no Package: header&#xA;E: Problem with MergeList /var/lib/apt/lists/repo.steampowered.com_steam_dists_precise_steam_i18n_Translation-en&#xA;E: The package lists or status file could not be parsed or opened.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I did a little bit of searching around on the net using a well known search engine and found a thread on the Ubuntu forums. The thread stated I could use the software centre to resolve my issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hurrah! Alas on trying to run Software Centre it hangs and immediately force quits. I can see that some of the problems are to do with my source.list file but I am a little nervous removing entries from this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any guidance would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="569" LastEditorUserId="26" LastEditDate="2015-07-29T15:45:14.193" LastActivityDate="2016-09-24T20:46:46.423" Title="&quot;apt-get upgrade&quot; fails with errors (E: Encountered a section with no Package: header) and (W: Duplicate sources.list entry)" Tags="|apt|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="731" PostTypeId="1" AcceptedAnswerId="732" CreationDate="2015-07-24T16:39:09.770" Score="1" ViewCount="214" Body="&lt;p&gt;I can see in 'Hot corners' two options which apparently seem equal. In Spanish these two are called:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Ver todas las ventanas&lt;/p&gt;&#xA;&lt;p&gt;Mostrar todas las ventanas&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;They are the third and second to last options in the dropdown, respectively.&lt;/p&gt;&#xA;&lt;p&gt;In Spanish these two sentences are pretty much indistinguishable.&lt;/p&gt;&#xA;&lt;p&gt;What do they say in English and what do they do differently?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-07-24T16:49:26.907" Title="What's the difference between these two 'Hot corners' options?" Tags="|release-freya|hot-corners|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="732" PostTypeId="2" ParentId="731" CreationDate="2015-07-24T16:49:26.907" Score="3" Body="&lt;p&gt;They say:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Window overview =&gt; Will show only the windows on your current virtual desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Show all windows =&gt; Will show all the windows on all of your virtual desktops&lt;/p&gt;&#xA;" OwnerUserId="374" LastActivityDate="2015-07-24T16:49:26.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="734" PostTypeId="2" ParentId="727" CreationDate="2015-07-24T16:57:42.323" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/WindowsDualBoot&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; is a great tutorial that I believe works with elementary too.&#xA;I recommend following &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation/343370#343370&quot;&gt;this answer on askubuntu&lt;/a&gt; on creating disk partitions for your installation.&#xA;You might want to use the &lt;code&gt;Windows Partitioning Tool&lt;/code&gt; withing Windows to shrink the Windows partition though, so you avoid potentially corrupting your Windows installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="325" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-24T16:57:42.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="735" PostTypeId="1" CreationDate="2015-07-24T17:58:48.747" Score="2" ViewCount="7627" Body="&lt;p&gt;I would like to know how to change my keyboard from an English layout to a Portuguese (Brazil) layout.&lt;/p&gt;&#xA;" OwnerUserId="570" LastEditorUserId="242" LastEditDate="2015-07-27T00:51:30.293" LastActivityDate="2022-07-12T04:14:30.237" Title="How do I change the keyboard layout?" Tags="|keyboard|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="736" PostTypeId="1" CreationDate="2015-07-24T18:18:00.080" Score="2" ViewCount="984" Body="&lt;p&gt;I was having issues with the 0.9 version of Spotify and switched to the 1.0 beta of Spotify. After that my multimedia keys on my keyboard don't work. I've reset the defaults of my org&gt;gnome&gt;settings-daemon&gt;plugins&gt;media keys and that didn't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="9" LastEditDate="2015-07-25T07:40:22.090" LastActivityDate="2015-07-25T07:40:22.090" Title="elementary OS Freya multimedia keys and Spotify" Tags="|release-freya|spotify|dconf|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="737" PostTypeId="1" AcceptedAnswerId="741" CreationDate="2015-07-24T18:46:26.537" Score="4" ViewCount="6016" Body="&lt;p&gt;I have heard something about the next release of elementary OS, named Loki. Which new features are planned and published yet? I have a new software center or elementary market in mind. Anything else?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT (To reply closing this question)&lt;/strong&gt;: Please add only features which are published yet. Answers of this question could cover the whole developing process of Loki.&lt;/p&gt;&#xA;" OwnerUserId="34" LastEditorUserId="3757" LastEditDate="2016-03-06T06:42:04.943" LastActivityDate="2016-03-06T06:42:04.943" Title="Which new features will Loki have?" Tags="|release-loki|" AnswerCount="1" CommentCount="3" FavoriteCount="0" ClosedDate="2015-07-25T07:34:53.580" ContentLicense="CC BY-SA 3.0" />
  <row Id="738" PostTypeId="2" ParentId="735" CreationDate="2015-07-24T19:22:44.127" Score="5" Body="&lt;p&gt;To change the layout, go to &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Keyboard&lt;/code&gt; -&gt; &lt;code&gt;Layout&lt;/code&gt; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, click the &lt;code&gt;+&lt;/code&gt; sign at the bottom left part of the window, choose &lt;code&gt;Portuguese&lt;/code&gt; in the language section and choose whatever Portuguese keyboard layout that works best for you.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-24T19:37:15.933" LastActivityDate="2015-07-24T19:37:15.933" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="739" PostTypeId="5" CreationDate="2015-07-24T19:31:53.287" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-24T19:31:53.287" LastActivityDate="2015-07-24T19:31:53.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="740" PostTypeId="4" CreationDate="2015-07-24T19:31:53.287" Score="0" Body="Settings are options in a program that allow you to configure the program to suit your needs." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:07.657" LastActivityDate="2015-08-01T11:02:07.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="741" PostTypeId="2" ParentId="737" CreationDate="2015-07-24T19:43:51.807" Score="9" Body="&lt;p&gt;There is no final list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see the current list by going to &lt;a href=&quot;https://launchpad.net/elementary/+milestone/loki-beta1&quot;&gt;https://launchpad.net/elementary/+milestone/loki-beta1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, there's 39 blueprints linked to the Loki Beta 1 version. The list is constantly being changed and that's perfectly fine for the current state of the release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The AppCenter is currently being developed and will &lt;em&gt;probably&lt;/em&gt; be a part of the Loki release, although there's no way of accurately predicting that right now.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-07-24T19:43:51.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="742" PostTypeId="1" AcceptedAnswerId="826" CreationDate="2015-07-24T20:04:41.080" Score="2" ViewCount="1373" Body="&lt;p&gt;After a recent crash (but recovery and correct reboot afterwards) of my Win8.1, Freya is no longer able to mount the NTFS partition. When I try that I get the error that Windows is in the suspended state (error 14), but I have shut down Windows completely. How can I mount the partition in r/w-mode again?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I can boot Windows perfectly, can reboot, and have also deactivated fastboot.&lt;/p&gt;&#xA;" OwnerUserId="310" LastEditorUserId="179" LastEditDate="2015-07-25T17:20:37.413" LastActivityDate="2015-07-27T21:27:09.900" Title="Can't mount Windows partition r/w anymore" Tags="|mount|microsoft-windows|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="743" PostTypeId="2" ParentId="712" CreationDate="2015-07-24T20:16:07.920" Score="12" Body="&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Keyboard&lt;/code&gt; -&gt; &lt;code&gt;Shortcuts&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h1Ll5.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h1Ll5.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose &lt;code&gt;Custom&lt;/code&gt; and click on the &lt;code&gt;+&lt;/code&gt; sign.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You'll be requested to enter a command. Type this as a command: &lt;code&gt;screenshot-tool&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on the &lt;code&gt;Disabled&lt;/code&gt; string next to it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press your Print Screen button.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0M18f.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0M18f.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;You'll get this dialog. Press the &lt;code&gt;Reassign&lt;/code&gt; button.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wzpre.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wzpre.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="15263" LastEditDate="2018-08-16T07:57:07.033" LastActivityDate="2018-08-16T07:57:07.033" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="744" PostTypeId="2" ParentId="742" CreationDate="2015-07-24T20:21:50.867" Score="1" Body="&lt;p&gt;That's the thing. Even though you &lt;em&gt;think&lt;/em&gt; that you have completely shut down your Windows system, you really didn't. Windows keeps the drive mounted so it can speed up its boot process (this has nothing to do with fastboot, it's a normal Windows behavior since Windows 8).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try turning off your Windows system by typing this into your &lt;code&gt;cmd&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; shutdown -s -t 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command will shut down your Windows system completely and you will be able to use the partition from the elementary installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the command will shut down your system immediately. To set a time interval, you can change the &lt;code&gt;0&lt;/code&gt; at the end to &lt;code&gt;30&lt;/code&gt;, which will shut down your system in 30 seconds. If you don't include the &lt;code&gt;-t 0&lt;/code&gt; at the end of the command, I &lt;em&gt;think&lt;/em&gt; that the default behavior is to set the time to 60 seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an alternative, you can mount the partition as read-only by typing this in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /media/Windows&#xA;sudo mount -o ro /dev/sdaX /media/Windows&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You only have to execute the first command once.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-25T22:32:45.683" LastActivityDate="2015-07-25T22:32:45.683" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="745" PostTypeId="2" ParentId="736" CreationDate="2015-07-24T20:56:34.397" Score="3" Body="&lt;p&gt;Multimedia keys are working fine for me in the latest testing version (1.0.9). In this article you can find how to install it: &lt;a href=&quot;http://sysads.co.uk/2015/06/spotify-client-1-0-7-beta-for-linux-released/&quot; rel=&quot;nofollow&quot;&gt;http://sysads.co.uk/2015/06/spotify-client-1-0-7-beta-for-linux-released/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Use testing Spotify reposity&#xA;sudo sh -c 'echo &quot;deb http://repository.spotify.com testing non-free&quot; &amp;gt;&amp;gt; /etc/apt/sources.list.d/spotify.list'&#xA;&#xA;# Add appropriate keys to verify packages&#xA;sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 94558F59&#xA;&#xA;# Install Spotify from testing repository&#xA;sudo apt-get update &amp;amp;&amp;amp; apt-get install spotify-client&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="228" LastEditorUserId="22" LastEditDate="2015-07-25T00:19:13.873" LastActivityDate="2015-07-25T00:19:13.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="746" PostTypeId="2" ParentId="730" CreationDate="2015-07-24T21:26:49.687" Score="6" Body="&lt;p&gt;The lines that start with &lt;code&gt;W:&lt;/code&gt; are warnings and not directly harmful. You somehow have the package source &lt;code&gt;http://dl.google.com/linux/chrome/deb/stable/main&lt;/code&gt; (Google's repository for Chrome) listed twice. You can fix that from the Software Center once you've fixed your other problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other problem is that one of the files that the package manager reads information from has invalid content. That's the file &lt;code&gt;/var/lib/apt/lists/repo.steampowered.com_steam_dists_precise_steam_i18n_Translation-en&lt;/code&gt;. Given the name, this file contains translations of package descriptions. It's often distributed in a compressed form, but it needs to be in plain text form once it's downloaded to the &lt;code&gt;/var/lib/apt/lists&lt;/code&gt; directory. The URL corresponding to this file is &lt;a href=&quot;http://repo.steampowered.com/steam/dists/precise/steam/i18n/Translation-en&quot; rel=&quot;nofollow&quot;&gt;http://repo.steampowered.com/steam/dists/precise/steam/i18n/Translation-en&lt;/a&gt; which doesn't deliver anything now so I don't know whether the problem was on Steam's servers or on your machine. (Unless you need to be logged in to download that file?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to fix this from the command line. Open a terminal. If you just want to fix the problem, run the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to download package lists again. This should remove the problematic file since there's nothing to download at this URL. If the file isn't removed, remove it manually (&lt;code&gt;sudo rm /var/lib/apt/lists/repo.steampowered.com_steam_dists_precise_steam_i18n_Translation-en&lt;/code&gt;) — it only contains translations of package descriptions, so it isn't vital to the system anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to investigate what's going on, check the format of the file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;file /var/lib/apt/lists/repo.steampowered.com_steam_dists_precise_steam_i18n_Translation-en&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this says something about “compressed data”, it could be an APT bug or a temporary misconfiguration on Steam's servers. If this says that it's a plain text file, there was a problem on Steam's servers while building that file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the problematic file is downloaded again because that URL is in fact available for you, you may need to comment out the Steam package source until the problem is resolvd. If you want to do this, run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep -r repo.steampowered.com /etc/apt/sources.list*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will show a file name followed by a colon and some more text, the file name being either &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; or &lt;code&gt;/etc/apt/sources.list.d/&lt;em&gt;SOMETHING&lt;/em&gt;&lt;/code&gt;. Edit that file as the superuser (e.g. &lt;code&gt;sudo nano /etc/apt/sources.list.d/steam.list&lt;/code&gt;) and add a &lt;code&gt;#&lt;/code&gt; character at the beginning of the line(s) that starts with the word &lt;code&gt;deb&lt;/code&gt;. To reenable the source, remove the &lt;code&gt;#&lt;/code&gt; character.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After running &lt;code&gt;apt update&lt;/code&gt; with no errors and getting rid of the problematic file, the Software Center and the &lt;code&gt;apt*&lt;/code&gt; command line tools should work again.&lt;/p&gt;&#xA;" OwnerUserId="190" LastEditorUserId="26" LastEditDate="2016-09-24T20:46:46.423" LastActivityDate="2016-09-24T20:46:46.423" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="747" PostTypeId="1" AcceptedAnswerId="749" CreationDate="2015-07-24T22:19:46.873" Score="6" ViewCount="1795" Body="&lt;p&gt;All windows are still draggable using their headers, except for Firefox. Firefox lost its window decorations and can be neither dragged nor resized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to restart a window manager and/or to check its logs?&lt;/p&gt;&#xA;" OwnerUserId="575" LastEditorUserId="21" LastEditDate="2015-07-26T07:09:37.793" LastActivityDate="2015-07-26T07:09:37.793" Title="Alt+drag stopped working. How can I restart a window manager?" Tags="|window-manager|window-decoration|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="748" PostTypeId="1" CreationDate="2015-07-25T04:34:03.470" Score="3" ViewCount="111" Body="&lt;p&gt;Using elementary OS 0.3 Freya (64-bit). I use Chromium as my browser and Thunderbird as my e-mail client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on a url in Thunderbird, I notice the url is passed to Chromium, but control isn't transferred to Chromium.  I have to press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; to cycle to Chromium.  Very annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why doesn't elementary OS automatically switch to Chromium, when I click on a link in Thunderbird?  Why the extra keystrokes?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help you can offer.&lt;/p&gt;&#xA;" OwnerUserId="458" LastEditorUserId="34" LastEditDate="2015-09-03T22:22:25.880" LastActivityDate="2015-09-03T22:22:44.313" Title="Why don't clicks on links in Thunderbird automatically open my web browser?" Tags="|applications|" AnswerCount="1" CommentCount="1" ClosedDate="2015-07-26T07:09:51.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="749" PostTypeId="2" ParentId="747" CreationDate="2015-07-25T05:59:40.917" Score="13" Body="&lt;p&gt;&lt;strong&gt;Alt+Drag&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my install (Freya) the default key for this functionality is actually &lt;kbd&gt;Super&lt;/kbd&gt; (meta/windows key). You can change this in dconf-editor by navigating to &lt;code&gt;org.gnome.desktop.wm.preferences&lt;/code&gt; and setting &lt;code&gt;mouse-button-modifier&lt;/code&gt; to &lt;code&gt;&amp;lt;Alt&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Gala (Window Manager)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command to respawn the window manager is &lt;code&gt;DISPLAY=:0 gala --replace &amp;amp;&lt;/code&gt;.&#xA;Note that you should do this from a VT (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;) rather than a gui terminal so the gala process doesn't end when you close said terminal.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-07-25T07:18:39.317" LastActivityDate="2015-07-25T07:18:39.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="750" PostTypeId="2" ParentId="712" CreationDate="2015-07-25T07:47:07.030" Score="1" Body="&lt;p&gt;The default screenshot tool of elementary OS offers the possibility to record only a portion of the screen or just the current running app. Have a look at the keyboard options in the system settings. There is a section just for screenshots with all possible hotkeys.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-07-25T07:47:07.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="751" PostTypeId="2" ParentId="748" CreationDate="2015-07-25T08:39:42.393" Score="3" Body="&lt;p&gt;I don't believe this issue is limited to Thunderbird / Chromium but instead related to a known &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=752000&quot; rel=&quot;nofollow&quot;&gt;GTK+ bug&lt;/a&gt; inherited from mutter that affects gala. Fortunately after several years it appears a possible fix may be &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1220179&quot; rel=&quot;nofollow&quot;&gt;forthcoming&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are several other instances (&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1462933&quot; rel=&quot;nofollow&quot;&gt;[1]&lt;/a&gt;,&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1014120&quot; rel=&quot;nofollow&quot;&gt;[2]&lt;/a&gt;) of annoying focus issues in the elementary OS bug tracker which the above fix will hopefully resolve.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would suggest you mark the appropriate bugs as 'Affecting me' on the elementary OS bug tracker or opening a new one if your feel yours is in fact different.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="34" LastEditDate="2015-09-03T22:22:44.313" LastActivityDate="2015-09-03T22:22:44.313" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="752" PostTypeId="2" ParentId="722" CreationDate="2015-07-25T12:32:22.587" Score="2" Body="&lt;p&gt;&lt;strong&gt;Reverse Engineered ALPS driver&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;People report successful multitouch support with some alps touchpads when using the driver located at &lt;a href=&quot;http://www.dahetral.com/public-download/alps-psmouse-dlkm-for-3-2-and-3-5/view&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; page. Download that file then in a terminal do the following...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;tar vxf psmouse-alps-1.3-alt.tbz&#xA;sudo cp -r ./usr/src/psmouse-alps-1.3/ /usr/src/&#xA;sudo dkms add psmouse/alps-1.3&#xA;sudo dkms autoinstall&#xA;sudo rmmod psmouse &amp;amp;&amp;amp; sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Upgrade Kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2246532&amp;amp;page=2&amp;amp;p=13237875#post13237875&quot; rel=&quot;nofollow&quot;&gt;This&lt;/a&gt; forum post seems to indicate that upgrading your kernel to version 3.19 may also work. While this can be done with a simple command, you may run into other issues in doing so. Certainly don't attempt this on an install you can't afford to lose. If you feel brave or have nothing to lose run the following in a terminal. Note: This will only work on an installed elementaryOS, not on a live DVD/USB. You must reboot afterwards to boot to the newer kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install linux-generic-lts-vivid&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-07-28T22:09:27.520" LastActivityDate="2015-07-28T22:09:27.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="753" PostTypeId="1" CreationDate="2015-07-25T13:04:35.873" Score="6" ViewCount="2373" Body="&lt;p&gt;My sound is broken and I have a hard time discerning if it's a hardware or software problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment, the speakers on my laptop work, as I can hear sound just fine when I watch a video. However, in the sound settings plug in switchboard, when I try to test my speakers, I hear nothing from Front Left and Front Right. I don't know if that's a problem with my speakers or with the sound settings module. I've reinstalled (purge + install) switchboard-plug-gcc-sound in case any config went awry, but the problem still persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for my headphones, sometimes sound comes through only one channel (right), sometimes both, sometimes neither. Again, in the sound settings panel, I hear nothing when I test the left and right channels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other day, I was getting no sound through my headphones: nothing from sound test, nothing from videos, but strangely the beep worked just fine in both ears. I booted into an elementary live-cd environment and heard the sound working just fine, including the sound test. I thought I'd save the config (&lt;code&gt;~/.config/pulse&lt;/code&gt;) in the live-cd run and somehow incorporate that into my actual installation of freya, but once I booted back into it, all the sound was working again, including the sound tests, without me touching the config.&lt;/p&gt;&#xA;" OwnerUserId="583" LastActivityDate="2021-09-20T17:35:45.917" Title="No sound through headphones" Tags="|release-freya|settings|sound|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="755" PostTypeId="1" AcceptedAnswerId="756" CreationDate="2015-07-25T14:24:40.890" Score="10" ViewCount="2744" Body="&lt;p&gt;I saw the screenshots of new indicators in Daniel's Google+, how can I install them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zgslW.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zgslW.png&quot; alt=&quot;Sound Indicator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UbZe6.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UbZe6.png&quot; alt=&quot;Notifications Indicator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-07-25T15:41:59.650" LastActivityDate="2016-02-21T11:22:32.537" Title="How can I test the new indicators?" Tags="|release-freya|testing|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="756" PostTypeId="2" ParentId="755" CreationDate="2015-07-25T14:24:40.890" Score="11" Body="&lt;h1&gt;Install&lt;/h1&gt;&#xA;&lt;p&gt;&lt;strong&gt;Attention! Be careful, this is a test version of a packages, use the virtualization or make a &lt;a href=&quot;https://elementaryos.stackexchange.com/a/675/160&quot;&gt;backup&lt;/a&gt; for future rollback!&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Add &lt;code&gt;ppa:elementary-os/staging&lt;/code&gt; and &lt;code&gt;ppa:elementary-os/daily&lt;/code&gt; and upgrade libgranite3 wingpanel and greeter packages:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/staging&#xA;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get install --reinstall libgranite3 wingpanel pantheon-greeter -y&#xA;sudo apt-add-repository -r ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install indicator-ayatana to display third-party indicators:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install indicator-keyboard if you use multiple keyboard layouts:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wingpanel-indicator-keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Fix indicator-network doubling:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/xdg/autostart/nm-applet.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Find the &lt;code&gt;NoDisplay=true&lt;/code&gt; and replace on &lt;code&gt;NoDisplay=false&lt;/code&gt;. After save changes and exit.&lt;/p&gt;&#xA;&lt;p&gt;Run &lt;code&gt;gnome-session-properties&lt;/code&gt; in the terminal and uncheck &amp;quot;Network&amp;quot; in the opening window.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x6QLJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x6QLJ.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After these steps logged out and in again.&lt;/p&gt;&#xA;&lt;h1&gt;Return&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge ppa:elementary-os/staging&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Go to &lt;code&gt;System Setting&lt;/code&gt; &amp;gt; &lt;code&gt;Applications&lt;/code&gt; &amp;gt; &lt;code&gt;Startup&lt;/code&gt; and check &amp;quot;Network&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/saN6v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/saN6v.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After these steps logged out and in again.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-08T20:03:02.270" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="757" PostTypeId="2" ParentId="742" CreationDate="2015-07-25T14:52:58.933" Score="0" Body="&lt;p&gt;If you don't know the device identifier of your windows partition first find that with fdisk. It will be the large NTFS one (most likely on /dev/sda)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo fdisk -l&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run the linux equivalent of chkdsk, replacing the XY with partition ID (eg &lt;code&gt;/dev/sda2&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ntfsfix /dev/sdXY&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that does not work try the adding the -d flag to ntfsfix to set the &lt;strong&gt;dirty&lt;/strong&gt; flag on the partition which will force windows to run chkdsk on next boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ntfsfix -d /dev/sdXY&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-07-25T14:52:58.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="758" PostTypeId="5" CreationDate="2015-07-25T15:52:36.993" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-25T15:52:36.993" LastActivityDate="2015-07-25T15:52:36.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="759" PostTypeId="4" CreationDate="2015-07-25T15:52:36.993" Score="0" Body="Questions about Google Chrome web browser and related applications." OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-07-25T17:20:27.620" LastActivityDate="2015-07-25T17:20:27.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="760" PostTypeId="1" CreationDate="2015-07-25T18:45:56.887" Score="1" ViewCount="210" Body="&lt;p&gt;The &lt;code&gt;Add Printer&lt;/code&gt; dialog under &lt;code&gt;Printers&lt;/code&gt; is unable to find my Wireless Canon MG6250 printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know the IP address but still it's not detected.&lt;br&gt;&#xA;I can surf to the web-interface of the printer on the IP.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What more can I do to fix this?&lt;/p&gt;&#xA;" OwnerUserId="586" LastActivityDate="2023-12-18T07:04:05.527" Title="Wireless Canon MG6250 printer not found" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="761" PostTypeId="1" AcceptedAnswerId="769" CreationDate="2015-07-25T19:29:32.493" Score="19" ViewCount="13809" Body="&lt;p&gt;I'm trying to contribute with Docker's install script by providing auto distribution detection support for elementary OS, so, elementary OS users would be automatically detected when using Docker's official install script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The script will add an apt repository with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://apt.dockerproject.org/repo ${lsb_dist}-${dist_version} ${repo}&quot; &amp;gt; /etc/apt/sources.list.d/docker.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where &lt;strong&gt;lsb_dist&lt;/strong&gt;=&lt;strong&gt;elementary&lt;/strong&gt;, &lt;strong&gt;dist_version&lt;/strong&gt;=&lt;strong&gt;freya&lt;/strong&gt; and &lt;strong&gt;repo&lt;/strong&gt;=&lt;strong&gt;main&lt;/strong&gt; in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that it'll do apt-get update and install the &quot;docker-engine&quot; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Though, Docker apt repository doesn't have entries for elementary OS. I've tested using &quot;ubuntu-trusty&quot; repository and it works just fine in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I want to use Ubuntu repositories to setup Docker for elementary, but I would like to avoid hard coding elementary OS correspondent base Ubuntu versions, if that's possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there a file or command which will tell me what's elementary OS' base Ubuntu version, and works in all elementary OS versions?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="588" LastEditorUserId="45" LastEditDate="2015-07-26T02:02:44.517" LastActivityDate="2018-11-10T03:02:00.430" Title="Determine base Ubuntu version" Tags="|programming|pantheon-terminal|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="763" PostTypeId="1" AcceptedAnswerId="765" CreationDate="2015-07-25T20:36:21.293" Score="5" ViewCount="128" Body="&lt;p&gt;I would like to play a little bit with elementary programs. Could someone provide me a guide how to fetch a trunk from launchpad and run that trunk on my pc?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm really a rookie in things like git.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="158" LastActivityDate="2015-09-06T17:50:38.933" Title="How to fetch a project from launchpad" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="764" PostTypeId="2" ParentId="735" CreationDate="2015-07-25T21:22:42.617" Score="0" Body="&lt;p&gt;If you like to have some visual cues, I made a video recently on how to do this, it's in Dutch, but if you follow the video, it's pretty clear on how to do it. &lt;a href=&quot;https://www.youtube.com/watch?v=9c8vHVE_mtA&quot; rel=&quot;nofollow&quot;&gt;YouTube video link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2015-07-25T21:22:42.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="765" PostTypeId="2" ParentId="763" CreationDate="2015-07-25T21:53:05.380" Score="8" Body="&lt;p&gt;elementary OS doesn't use Git. It uses Bazaar, which is an alternative to Git.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fetch some part of elementary OS from Launchpad:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go here: &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/elementary&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In your browser, select a project on the right side that you want to fetch (I'm going to use Scratch as an example) and then click on the &lt;code&gt;Code&lt;/code&gt; on the top.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You'll see the Bazaar command that you'll need to enter in Terminal to fetch the code. Here's an example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;bzr branch lp:scratch&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This command is going to create a subfolder in the current working directory and name it &lt;code&gt;scratch&lt;/code&gt;. Once the command is executed, &lt;code&gt;cd&lt;/code&gt; into that subfolder and then try to build the code by referring to the file called &lt;code&gt;INSTALL&lt;/code&gt; or &lt;code&gt;HACKING&lt;/code&gt; that will guide you through the process.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="138" LastEditorUserId="34" LastEditDate="2015-09-06T17:50:38.933" LastActivityDate="2015-09-06T17:50:38.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="766" PostTypeId="2" ParentId="761" CreationDate="2015-07-25T22:02:40.900" Score="-4" Body="&lt;p&gt;Every version of elementary OS is built on top of the current Ubuntu's LTS versions. I don't think that there's a command that will tell you that, but here's what was done so far:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS Jupiter was built on top of the Ubuntu 10.04 (thanks to PNG for the confirmation).&lt;/li&gt;&#xA;&lt;li&gt;elementary OS Luna was built on top of the Ubuntu 12.04.&lt;/li&gt;&#xA;&lt;li&gt;elementary OS Freya was built on top of the Ubuntu 14.04.&lt;/li&gt;&#xA;&lt;li&gt;elementary OS Loki (note: the code name for this version might be changed) will probably be built on top of the Ubuntu 16.06 version (at the moment, there is no official confirmation nor denial).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Example: &lt;a href=&quot;https://github.com/nodesource/distributions/blob/master/deb/setup_0.12&quot; rel=&quot;nofollow&quot; title=&quot;this link&quot;&gt;Node.js setup script has alternative distros all hard coded.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="588" LastEditDate="2015-07-26T07:09:18.250" LastActivityDate="2015-07-26T07:09:18.250" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="767" PostTypeId="1" AcceptedAnswerId="768" CreationDate="2015-07-25T22:22:29.250" Score="31" ViewCount="1817" Body="&lt;p&gt;Why does elementary develop a whole operating system (OS)&amp;mdash;i.e. a complete downloadable and installable disk image&amp;mdash;rather than just creating a desktop environment (DE) for users to install on their OS of choice?&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-06T06:27:43.457" Title="Why a whole operating system and not just a DE?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="768" PostTypeId="2" ParentId="767" CreationDate="2015-07-25T22:22:29.250" Score="33" Body="&lt;p&gt;elementary develops an OS rather than just a DE for a few reasons.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;elementary OS is advertised as a replacement for Windows and macOS.&lt;/li&gt;&#xA;&lt;li&gt;Distributing elementary OS as a whole OS makes it easier to improve all aspects of the user experience (UX).&lt;/li&gt;&#xA;&lt;li&gt;elementary is able to focus development on a single codebase.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;1. A replacement for Windows and macOS&lt;/h2&gt;&#xA;&lt;p&gt;The primary target market of elementary OS is people who are not already using open source software or Linux-based OSes. It is much easier for elementary to provide a whole OS than to steer potential users to download a completely different OS and then install something on top of it, or to rely on third-party OS distributors to package up and ship (potentially modified) versions of elementary software on top of their OSes.&lt;/p&gt;&#xA;&lt;h2&gt;2. Improving all aspects of the UX&lt;/h2&gt;&#xA;&lt;p&gt;By developing and distributing elementary OS, elementary can improve more than just the &amp;quot;userland&amp;quot; (i.e. non-low-level) aspects of the user experience. For example, in the previous version, Luna, elementary OS included tweaks to the OS that made it preload frequently-used applications, making the OS and application start times faster across the board.&lt;/p&gt;&#xA;&lt;p&gt;If, in the future, an even more low-level improvement would speed up the OS boot time, improve security, etc., elementary OS is free to make those improvements. elementary sees the user experience as starting as soon as the device powers on, not just once a user has logged in.&lt;/p&gt;&#xA;&lt;h2&gt;3. Focusing on a single codebase&lt;/h2&gt;&#xA;&lt;p&gt;elementary can focus its somewhat limited development power and resources on a single codebase: elementary OS. If elementary software was designed primarily to be used on top of other OSes, it would mean every change to the codebase would need to be tested in a variety of implementations on other OSes. It would also mean elementary would likely need to either choose a third-party OS to cater to as the reference implementation, or develop a standalone OS anyway to use as a test case.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;That said, elementary definitely isn't opposed to third-parties packaging its desktop environment (Pantheon) for use elsewhere, and &lt;a href=&quot;https://fedoraproject.org/wiki/Changes/PantheonDesktop&quot; rel=&quot;noreferrer&quot;&gt;there&lt;/a&gt; &lt;a href=&quot;https://wiki.archlinux.org/index.php/Pantheon&quot; rel=&quot;noreferrer&quot;&gt;are&lt;/a&gt; &lt;a href=&quot;https://build.opensuse.org/project/show/X11:Pantheon&quot; rel=&quot;noreferrer&quot;&gt;people&lt;/a&gt; &lt;a href=&quot;https://launchpad.net/pantheon-debian&quot; rel=&quot;noreferrer&quot;&gt;actively&lt;/a&gt; &lt;a href=&quot;https://build.opensuse.org/project/show/X11:Pantheon&quot; rel=&quot;noreferrer&quot;&gt;doing&lt;/a&gt; that. :)&lt;/p&gt;&#xA;" OwnerUserId="308" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-06T06:27:43.457" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="769" PostTypeId="2" ParentId="761" CreationDate="2015-07-26T01:59:03.660" Score="31" Body="&lt;p&gt;You can find the &quot;upstream release&quot; codename using the &lt;code&gt;-u&lt;/code&gt; flag with &lt;code&gt;lsb_release&lt;/code&gt; commands. Try it with the following command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On Freya, it gives me the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: Ubuntu&#xA;Description:    Ubuntu 14.04 LTS&#xA;Release:    14.04&#xA;Codename:   trusty&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Without the &lt;code&gt;-u&lt;/code&gt; flag, you'll get our info as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: elementary OS&#xA;Description:    elementary OS Freya&#xA;Release:    0.3&#xA;Codename:   freya&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-26T02:05:06.713" LastActivityDate="2015-07-26T02:05:06.713" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="770" PostTypeId="1" CreationDate="2015-07-26T02:35:09.303" Score="2" ViewCount="172" Body="&lt;p&gt;I have elementary OS freya installed and updated--works great.  Decided to try to &lt;code&gt;fglrx&lt;/code&gt; from Software Center--kinda more glitchy than the open video drivers, but I wanted more FPS when playing online games--and for this it seems to do the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, whenever my screen turns off or my computer is in suspend, when I wake it up, I have the normal login screen.  After typing my password, as soon as I hit 'enter' the screen goes black.  I can hear the 'pop' notification sound of my wireless connecting, but there is no mouse or anything.  After about 2 seconds my monitor says, &quot;no signal&quot; and the orange light comes on (just like it's asleep.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can press &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F3&lt;/kbd&gt; and terminal pops up right away, then I can press &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; and my desktop pops up right away and everything is working fine again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the time beings, I have been logging in, opening terminal, then alt+f7 to get get back to desktop.  It works, but is there a way to fix this issue, or does anyone know what is happening?  This bug is slightly annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also noticed that AMD has &lt;code&gt;fglrx&lt;/code&gt; version 15.7 while the Software Center has 15.2.  If I wanted to upgrade to 15.7 from the website, do I need to delete 15.2 first? Or will this be taken care of automatically when installing 15.7?&lt;/p&gt;&#xA;" OwnerUserId="591" LastEditorUserId="3757" LastEditDate="2016-04-23T12:55:50.360" LastActivityDate="2016-04-23T12:55:50.360" Title="Installed fglrx from Software Center--screen goes black after login (monitor loses signal.)" Tags="|graphic-drivers|proprietary|" AnswerCount="0" CommentCount="6" ClosedDate="2019-02-20T16:07:42.240" ContentLicense="CC BY-SA 3.0" />
  <row Id="771" PostTypeId="2" ParentId="720" CreationDate="2015-07-26T07:52:31.667" Score="0" Body="&lt;p&gt;This did it for me&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/Icons&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Icons&lt;/a&gt; in the 'Use another icon set while keeping the Ubuntu Mono panel icons' section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Terminal and type &quot;sudo pantheon-files /usr/share/icons&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make a copy of the &quot;elementary&quot; folder.&#xA;Rename the folder to a new name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the index.theme file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the &quot;Name&quot; field to a new name (&quot;Name=elementary&quot; to &quot;Name=elementary+moka&quot;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add &quot;Inherits&quot; field to the name of the icon theme you want to use ‘Inherits=Moka’ to the name of the folder of the icons you want to use.(This folder may be in ~/.icons or in /usr/share/icons)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qOvfr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qOvfr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save the file and go to appearance preferences to set the new icon theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Original Answer: &lt;a href=&quot;https://askubuntu.com/questions/485183/change-the-application-icon-theme-but-not-changing-the-panel-icons&quot;&gt;https://askubuntu.com/questions/485183/change-the-application-icon-theme-but-not-changing-the-panel-icons&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;END RESULT(I Did The same Thing)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vQIPJ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vQIPJ.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="523" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-26T11:15:55.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="772" PostTypeId="2" ParentId="571" CreationDate="2015-07-26T08:42:25.850" Score="6" Body="&lt;p&gt;I know it's pretty late already but I had the same problem and I solved it by uninstalling and reinstalling pantheon. You can access terminal at login screen by pressing ctl+alt+f1. Then login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall pantheon:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get remove pantheon&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Reinstallation:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install pantheon&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and the reboot&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="595" LastActivityDate="2015-07-26T08:42:25.850" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="774" PostTypeId="1" AcceptedAnswerId="780" CreationDate="2015-07-26T11:01:26.120" Score="2" ViewCount="952" Body="&lt;p&gt;After installing latest updates (I think nvidia drivers were updated as well) I can't boot anymore. I get a black screen no matter what I try: adding nomodeset to boot options, choosing recovery mode or a different kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop description:&#xA;&lt;a href=&quot;http://www.everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2.66-aluminum-15-mid-2009-sd-unibody-specs.html&quot; rel=&quot;nofollow&quot;&gt;Macbook pro 5,3&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="596" LastEditorUserId="596" LastEditDate="2015-07-26T17:11:01.813" LastActivityDate="2016-07-06T20:02:40.057" Title="Boot black screen after last update" Tags="|release-freya|graphic-drivers|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="775" PostTypeId="1" AcceptedAnswerId="844" CreationDate="2015-07-26T14:31:54.917" Score="5" ViewCount="4270" Body="&lt;p&gt;I'm using Freya with the latest updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to synchronise my Google calendar with the built-in Freya calendar nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I put the same name of my Google calendar in the Freya calendar, marked it as a default calendar and repeated the whole process multiple times to be sure that the password was correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the problem, and is there any way to get some log to see what is happening when the calendar wants to connect to Google's server?&lt;/p&gt;&#xA;" OwnerUserId="599" LastEditorUserId="3757" LastEditDate="2016-04-04T14:09:53.997" LastActivityDate="2016-04-09T02:16:53.993" Title="Maya calendar does not synchronise with the Google account" Tags="|release-freya|calendar|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="776" PostTypeId="1" CreationDate="2015-07-26T14:36:43.887" Score="5" ViewCount="2402" Body="&lt;p&gt;I'm trying to install elementary OS over PXE and I'm following &lt;a href=&quot;https://help.ubuntu.com/community/PXEInstallServer&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; and &lt;a href=&quot;https://wiki.debian.org/PXEBootInstall&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; tutorial. But I had a problem with the netboot folder: I didn't find one for elementary OS. Can I find or do I have to make one? How do I make one? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: I tried to use &lt;a href=&quot;https://mikhail.guru/Projects/eOS_PXE&quot; rel=&quot;nofollow&quot;&gt;elementary OS PXE&lt;/a&gt;,  but didn't work for me either. &lt;/p&gt;&#xA;" OwnerUserId="598" LastEditorUserId="3757" LastEditDate="2016-04-13T13:09:13.523" LastActivityDate="2017-04-04T15:53:30.787" Title="Is there a netboot install for elementary?" Tags="|system-installation|boot|netboot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="777" PostTypeId="5" CreationDate="2015-07-26T15:27:42.573" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-26T15:27:42.573" LastActivityDate="2015-07-26T15:27:42.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="778" PostTypeId="4" CreationDate="2015-07-26T15:27:42.573" Score="0" Body="For use with the default calendar Maya (aka Calendar)" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-07-26T16:19:53.233" LastActivityDate="2015-07-26T16:19:53.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="779" PostTypeId="1" CreationDate="2015-07-26T15:39:15.453" Score="1" ViewCount="1163" Body="&lt;p&gt;When I go to my downloads, there is a minus symbol on the bottom left on the icon of my downloads. I can't move to trash or move it at all. This started after I changed the properties on one of my downloads. Please help.&lt;/p&gt;&#xA;" OwnerUserId="600" LastEditorUserId="26" LastEditDate="2015-09-03T10:52:35.117" LastActivityDate="2020-04-26T09:34:57.943" Title="I can't delete or access a download" Tags="|pantheon-files|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="780" PostTypeId="2" ParentId="774" CreationDate="2015-07-26T15:40:53.077" Score="1" Body="&lt;p&gt;I managed to login in console and I installed again all the latest updates.&#xA;Everything is fine now, back to normal. :)&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-07-26T15:40:53.077" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="782" PostTypeId="1" CreationDate="2015-07-26T16:24:38.333" Score="2" ViewCount="3006" Body="&lt;p&gt;IIRC, in Luna it was possible to switch workspaces using the mouse wheel, as in Xfce. (Edit: That is, simply by scrolling the wheel on any point of the desktop not covered by a window.) Is it possible to make that work in Freya?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I know about the keyboard shortcuts, thanks for pointing that out. And I always have enough desktop real estate not covered by windows so that what I ask for actually makes sense.)&lt;/p&gt;&#xA;" OwnerUserId="602" LastEditorUserId="602" LastEditDate="2015-07-27T10:37:27.240" LastActivityDate="2016-01-18T02:35:27.487" Title="How can I switch workspaces using the mouse wheel?" Tags="|desktop|mouse|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="783" PostTypeId="1" CreationDate="2015-07-26T17:25:09.833" Score="6" ViewCount="1272" Body="&lt;p&gt;I'd like to install elementary OS Freya on a light-weight, low-end laptop. I'm thinking of buying the Acer Chromebook 15 CBS-571-C4T3 and completely replacing Chrome OS with elementary OS Freya - specifications of the unit are as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel Celeron Dual-Core 3205U 1.5 GHz Processor (Broadwell)&lt;/li&gt;&#xA;&lt;li&gt;2 GB DDR3L SDRAM&lt;/li&gt;&#xA;&lt;li&gt;16 GB Solid-State Drive&lt;/li&gt;&#xA;&lt;li&gt;15.6-Inch Screen&lt;/li&gt;&#xA;&lt;li&gt;Intel HD Graphics&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Has anyone in this forum tried this? I'd love to hear from others who have successfully installed Freya or Luna on a Chromebook with similar specs. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What issues did you have? How did you overcome them? Please share your experience and any guidance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="604" LastEditorUserId="160" LastEditDate="2015-09-18T05:15:03.850" LastActivityDate="2017-09-08T18:56:35.470" Title="Any problems installing elementary OS Freya on an Acer Chromebook 15 CB5-571-C4T3?" Tags="|system-installation|chromebook|" AnswerCount="4" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="784" PostTypeId="1" AcceptedAnswerId="787" CreationDate="2015-07-26T17:46:41.577" Score="4" ViewCount="1551" Body="&lt;p&gt;How can I set the clock to display 12-hour format? Example 1:45 PM instead of 13:45.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Language &amp;amp; Region settings are: Language: English; Numbers and dates: Spanish (Mexico)&lt;/p&gt;&#xA;" OwnerUserId="425" LastActivityDate="2015-07-26T20:13:20.660" Title="Wingpanel clock to display in 12-hour format?" Tags="|settings|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="785" PostTypeId="1" CreationDate="2015-07-23T19:29:30.340" Score="4" ViewCount="845" Body="&lt;p&gt;I am afraid this would be hard to achieve however I'll try to ask.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was used from other systems like Windows or other distros that when you have multiple applications opened and you want to shutdown your computer, then you just keep pressing Alt + F4 (and either saving or discarding sessions from programs you have opened before) until you reach the dialog which offers you shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However pressing Alt + F4 when no applications are opened in elementary OS does nothing, is there a way how to change the settings to have this kind of behavior?&lt;/p&gt;&#xA;" OwnerUserId="563" OwnerDisplayName="Petr Mensik" LastEditorUserId="3757" LastEditDate="2016-04-25T01:54:35.343" LastActivityDate="2016-04-25T01:54:35.343" Title="Use Alt + F4 to shut down elementary OS" Tags="|keyboard-shortcuts|shutdown|" AnswerCount="0" CommentCount="4" ClosedDate="2015-07-27T12:41:22.860" ContentLicense="CC BY-SA 3.0" />
  <row Id="786" PostTypeId="2" ParentId="784" CreationDate="2015-07-26T18:12:55.130" Score="1" Body="&lt;p&gt;If you go to System Settings &gt; Date &amp;amp; Time, at the bottom there is &quot;Time Format:&quot; just change that to AM/PM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/n6AxW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/n6AxW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="607" LastEditorUserId="607" LastEditDate="2015-07-26T20:13:20.660" LastActivityDate="2015-07-26T20:13:20.660" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="787" PostTypeId="2" ParentId="784" CreationDate="2015-07-26T18:13:01.573" Score="4" Body="&lt;p&gt;To select the 12-hour format:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime time-format 12-hour&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To return to the 24-hour format:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime time-format 24-hour&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="608" LastEditorUserId="160" LastEditDate="2015-07-26T18:39:57.543" LastActivityDate="2015-07-26T18:39:57.543" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="788" PostTypeId="2" ParentId="782" CreationDate="2015-07-26T18:44:25.757" Score="1" Body="&lt;p&gt;I don’t understand what kind of behaviour you are expecting (never used Xfce) but mouse wheel does change workspaces when you are in the multitasking view. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set up hot corner for multitasking view, use its launcher from slingshot or pin it to the plank as well as use &lt;kbd&gt;super&lt;/kbd&gt; + &lt;kbd&gt;↓&lt;/kbd&gt; keyboard shortcut to enter multitasking view.&lt;/p&gt;&#xA;" OwnerUserId="374" LastEditorUserId="602" LastEditDate="2015-07-26T20:01:45.827" LastActivityDate="2015-07-26T20:01:45.827" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="791" PostTypeId="2" ParentId="457" CreationDate="2015-07-26T21:04:48.277" Score="5" Body="&lt;p&gt;It seems that screen sharing is somehow limited or broken when using Hangouts without the plugin. I have got the plugin installed and screen sharing of individual windows is working fine in both Chromium and Firefox. I tried to disable the plugin in Chromium (43) and screen sharing didn't work at all (this is probably related to another issue: &lt;a href=&quot;https://code.google.com/p/chromium/issues/detail?id=413942&quot; rel=&quot;noreferrer&quot;&gt;https://code.google.com/p/chromium/issues/detail?id=413942&lt;/a&gt;). I would recommend you to install the latest plugin.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;a href=&quot;http://www.google.com/tools/dlpage/hangout/download.html?hl=en&quot; rel=&quot;noreferrer&quot;&gt;http://www.google.com/tools/dlpage/hangout/download.html?hl=en&lt;/a&gt; and download the Debian/Ubuntu package. Check the System Settings &gt; About if you do not know if you need 32bit or 64bit version.&lt;/li&gt;&#xA;&lt;li&gt;Install the downloaded package, using the Software Center for example. It should be enough to click the package in Files and press the Install button.&lt;/li&gt;&#xA;&lt;li&gt;Restart the browser and check if you see the Google Talk in plugin list.&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Firefox: Tools &gt; Add-ons &gt; Plugins&lt;/li&gt;&#xA;&lt;li&gt;Chrome/Chromium: Open chrome://plugins/&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now the plugin should be used for Hangouts. Please send us more information if the screen sharing is still not working for you. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A note to sharing a specific monitor: I think it's possible to share just a specific window or the whole desktop. I didn't see a possibility to share a specific monitor yet.&lt;/p&gt;&#xA;" OwnerUserId="228" LastActivityDate="2015-07-26T21:04:48.277" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="792" PostTypeId="1" AcceptedAnswerId="1355" CreationDate="2015-07-26T22:04:58.020" Score="1" ViewCount="228" Body="&lt;p&gt;I'm currently trying to learn Vala, but it fights me right from the start. I've basically copied the first Basic Sample found &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/GTKSample&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to build it using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; valac --pkg gtk+-3.0 &amp;lt;filename&amp;gt;.vala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I'm constantly getting this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package atspi-2 was not found in the pkg-config search path.&#xA;Perhaps you should add the directory containing `atspi-2.pc'&#xA;to the PKG_CONFIG_PATH environment variable&#xA;Package 'atspi-2', required by 'atk-bridge-2.0', not found&#xA;error: pkg-config exited with status 256&#xA;Compilation failed: 1 error(s), 0 warning(s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have no idea what any of this means nor how to fix this.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-26T22:10:51.313" LastActivityDate="2015-08-17T17:04:31.953" Title="Adding atspi-2 to the PKG_CONFIG_PATH environment table" Tags="|programming|vala|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="793" PostTypeId="5" CreationDate="2015-07-26T22:12:15.190" Score="0" Body="&lt;p&gt;elementary's preferred programming language.&lt;/p&gt;&#xA;" OwnerUserId="-1" LastEditorUserId="242" LastEditDate="2015-07-27T00:49:04.990" LastActivityDate="2015-07-27T00:49:04.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="794" PostTypeId="4" CreationDate="2015-07-26T22:12:15.190" Score="0" Body="Questions related to the Vala programming language." OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-27T00:49:08.420" LastActivityDate="2015-07-27T00:49:08.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="795" PostTypeId="2" ParentId="792" CreationDate="2015-07-26T22:53:48.133" Score="1" Body="&lt;p&gt;This seems to be a known bug of pkgconf v0.9.4-1 (currently installed on Freya) that has been fixed in v0.9.5-1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=734491&quot; rel=&quot;nofollow&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="596" LastEditorUserId="596" LastEditDate="2015-07-26T23:04:30.130" LastActivityDate="2015-07-26T23:04:30.130" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="796" PostTypeId="1" CreationDate="2015-07-26T22:54:35.567" Score="0" ViewCount="136" Body="&lt;p&gt;For some reason clicking of the wingpanel icon's menu items has only once worked for a small amount of time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They seemed to work for a few minutes so I presumed the problem had been resolved, without me realising it. A while later I tried to click one of the menu items and there was no effect again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have any ideas why this might be happening?&lt;/p&gt;&#xA;" OwnerUserId="612" LastEditorUserId="242" LastEditDate="2015-07-27T00:50:06.623" LastActivityDate="2015-07-28T17:03:41.387" Title="Wingpanel icon menu items no effect upon clicking" Tags="|wingpanel|" AnswerCount="2" CommentCount="5" ClosedDate="2015-07-28T21:45:27.293" ContentLicense="CC BY-SA 3.0" />
  <row Id="797" PostTypeId="1" CreationDate="2015-07-27T02:28:00.710" Score="24" ViewCount="13818" Body="&lt;p&gt;When running emacs, the following output appears:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X protocol error: BadMatch (invalid parameter attributes) on protocol request 139&#xA;When compiled with GTK, Emacs cannot recover from X disconnects.&#xA;This is a GTK bug: https://bugzilla.gnome.org/show_bug.cgi?id=85715&#xA;For details, see etc/PROBLEMS.&#xA;X protocol error: RenderBadPicture (invalid Picture parameter) on protocol request 139&#xA;When compiled with GTK, Emacs cannot recover from X disconnects.&#xA;This is a GTK bug: https://bugzilla.gnome.org/show_bug.cgi?id=85715&#xA;For details, see etc/PROBLEMS.&#xA;Fatal error 6: Aborted&#xA;...&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a workaround for this issue?&lt;/p&gt;&#xA;" OwnerUserId="616" LastEditorUserId="45" LastEditDate="2015-07-27T23:47:38.500" LastActivityDate="2020-10-25T09:20:48.253" Title="How to get GNU Emacs work on elementary OS?" Tags="|applications|" AnswerCount="5" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="800" PostTypeId="2" ParentId="753" CreationDate="2015-07-27T07:17:12.013" Score="3" Body="&lt;p&gt;Try &lt;code&gt;sudo apt-get install pavucontrol&lt;/code&gt; and see if maybe your pulseaudio settings are messed up.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-07-27T07:17:12.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="801" PostTypeId="2" ParentId="797" CreationDate="2015-07-27T07:34:58.660" Score="5" Body="&lt;p&gt;Try running it from the terminal and you'll literally see the link to the bug report. Here's the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X protocol error: BadMatch (invalid parameter attributes) on protocol request 139&#xA;When compiled with GTK, Emacs cannot recover from X disconnects.&#xA;This is a GTK bug: https://bugzilla.gnome.org/show_bug.cgi?id=85715&#xA;For details, see etc/PROBLEMS.&#xA;X protocol error: RenderBadPicture (invalid Picture parameter) on protocol request 139&#xA;When compiled with GTK, Emacs cannot recover from X disconnects.&#xA;This is a GTK bug: https://bugzilla.gnome.org/show_bug.cgi?id=85715&#xA;For details, see etc/PROBLEMS.&#xA;Fatal error 6: Aborted&#xA;...&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems to me like this is a 13 years old GTK problem and not the elementary-specific problem.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="190" LastEditDate="2015-07-27T22:26:06.523" LastActivityDate="2015-07-27T22:26:06.523" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="802" PostTypeId="2" ParentId="783" CreationDate="2015-07-27T07:45:19.720" Score="-1" Body="&lt;p&gt;I don't think elementary OS will have any problem installing on a low-end laptop. And if there are any bugs or problems you can always report it. The problem is likely already solved.&lt;/p&gt;&#xA;" OwnerUserId="595" LastActivityDate="2015-07-27T07:45:19.720" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="804" PostTypeId="2" ParentId="796" CreationDate="2015-07-27T10:54:31.513" Score="2" Body="&lt;p&gt;You can try running the following command in terminal,my wingpanel was acting weird too.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can instead try these commands too, the purge command completely deletes the wingpanel alongwith all its configuration files. So I think you might first want to try the above reinstall command, it worked for me.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge wingpanel&#xA;sudo apt-get install wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="555" LastActivityDate="2015-07-27T10:54:31.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="805" PostTypeId="1" AcceptedAnswerId="810" CreationDate="2015-07-27T11:39:00.990" Score="2" ViewCount="1684" Body="&lt;p&gt;I installed Spotify client using the method from their official site. When I run it, however, a low-res icon pop out on the dock and is used to maximise/minimise the app instead of the original hi-res icon. Any idea why this happen and how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="551" LastEditorUserId="45" LastEditDate="2015-07-28T19:33:13.337" LastActivityDate="2018-11-30T19:56:18.750" Title="Why is there a low-res icon on the dock when Spotify is running?" Tags="|plank|icons|spotify|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="806" PostTypeId="1" CreationDate="2015-07-27T11:57:57.223" Score="7" ViewCount="354" Body="&lt;p&gt;I've been using elementary OS Luna 32bit for a year in my Acer Aspire 9412WSMi, no problem. I can install it at any time. But I cannot install Freya 32bit. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've used both bootable DVD disks and USB sticks. Even if I use the Smart Boot Manager (usb image, with unetboting) from sbm.bin disk image I get a message on my screen:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[1.649601] Corrupted low memory at c000c6cc (c6cc phys) = 00000108&#xA;[1.649682] Memory corruption detected in low memory &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install stops soon. &#xA;I've updated BIOS from V1.05 to V1.24 from Acer. &lt;/p&gt;&#xA;" OwnerUserId="624" LastEditorUserId="68" LastEditDate="2015-07-29T20:24:21.143" LastActivityDate="2015-11-15T18:50:36.607" Title="Problems installing Freya on Acer Aspire 9412SMi" Tags="|system-installation|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="807" PostTypeId="1" CreationDate="2015-07-27T12:50:47.447" Score="2" ViewCount="624" Body="&lt;p&gt;I've got big problem with proprietary drivers in elementary OS. I installed fglrx but it's doesn't work. GUI is very laggy when I go to menu.. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i type &lt;code&gt;sudo lshw -c video&lt;/code&gt; it shows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-display               &#xA;   description: VGA compatible controller&#xA;   product: Kabini [Radeon HD 8210]&#xA;   vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;   physical id: 1&#xA;   bus info: pci@0000:00:01.0&#xA;   version: 00&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;   configuration: driver=fglrx_pci latency=0&#xA;   resources: irq:77 memory:e0000000-efffffff memory:f0000000-f07fffff ioport:2000(size=256) memory:f0900000-f093ffff memory:f0960000-f097ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please, help. :)&lt;/p&gt;&#xA;" OwnerUserId="625" LastEditorUserId="68" LastEditDate="2015-07-29T20:23:31.327" LastActivityDate="2015-07-29T20:23:31.327" Title="Lag GUI - Problem with Graphic Drivers" Tags="|graphic-drivers|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="808" PostTypeId="1" CreationDate="2015-07-27T13:57:41.650" Score="-2" ViewCount="589" Body="&lt;p&gt;After purging wingpanel and then installing it again, I rebooted and logged in. The login interface disappeared as usual but nothing else happened there was just the background image. I had this problem before and I fixed it by reinstalling pantheon (at least I think that's what I did, can't remember) however it doesn't seem to be working now (ctrl+alt+f2)&lt;/p&gt;&#xA;" OwnerUserId="612" LastEditorUserId="612" LastEditDate="2015-07-27T14:19:43.103" LastActivityDate="2015-07-27T20:06:03.183" Title="Blank desktop background after purging wingpanel" Tags="|wingpanel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="809" PostTypeId="2" ParentId="808" CreationDate="2015-07-27T15:27:04.097" Score="2" Body="&lt;p&gt;Fixed it by removing and install pantheon.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove pantheon&#xA;sudo apt-get install pantheon&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="612" LastActivityDate="2015-07-27T15:27:04.097" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="810" PostTypeId="2" ParentId="805" CreationDate="2015-07-27T15:33:26.087" Score="5" Body="&lt;p&gt;For some reason, Plank is unable to match the Spotify window to the original launcher's .desktop file. It's using a &quot;fallback&quot; icon from the window itself. This seems to be something that happens fairly often on cross-platform, non-native apps like Spotify, Chrome, Minecraft, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tried it myself, but supposedly you can fix it by modifying Spotify's .desktop (stored in /usr/share/applications) by changing the line &lt;code&gt;Exec=spotify %U&lt;/code&gt; to &lt;code&gt;Exec=spotify&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be aware that this may affect Spotify's ability to accept arguments from the command line or other features involving opening external files. For more information, you can see &lt;a href=&quot;https://askubuntu.com/questions/30210/what-does-u-mean-when-calling-a-command&quot;&gt;this explanation of what &lt;code&gt;%U&lt;/code&gt; does&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-28T15:55:33.033" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="811" PostTypeId="1" CreationDate="2015-07-27T16:20:02.100" Score="1" ViewCount="197" Body="&lt;p&gt;I just installed fresh elementary OS Freya as my new web development (Node.js) environment. I updated the system, upgraded it and installed NVIDIA GeForce drivers (the tested ones, not -updates).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem is the performance of browsers. Firefox is lagging on scrolling (on some webpages that are JS heavy) and overall JS performance is terrible. Agar.io not playable due to low FPS on a machine with i3 3220 and GeForce GTX460 and 8GB of RAM. What could be a reason for such problems?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apart from that system is snappy and pages that don't rely heavily on real-time JS are just fine (SO for example). &lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-07-27T21:31:27.367" Title="Poor JS performance on Firefox and Midori" Tags="|applications|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="812" PostTypeId="1" CreationDate="2015-07-27T16:57:02.327" Score="2" ViewCount="713" Body="&lt;p&gt;I installed elementary OS Freya from a LiveUSB (I didn't have to disable anything in the bios, I just pressed F12 and chose the USB option) after shrinking my Windows partition by 100GB. I allocated 12GB (2x my RAM) for the swap space and the rest for &quot;/&quot; (root).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was following this &lt;a href=&quot;http://www.tweaking4all.com/os-tips-and-tricks/uefi-dual-boot-windows81-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;guide&lt;/a&gt; up until it tells you to reboot into Windows:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Reboot your computer … and most likely your computer will boot straight into Windows …&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;However, my laptop boots straight into elementary OS. Any idea how to get Windows back as a boot option?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additional information:&#xA;Alienware M14xR2, with Windows 7&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Output from Boot Repair] (1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nCjDh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;GParted screenshot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: I have [these options] (2) available in &quot;Advanced&quot; option in Boot Repair. I can change the &quot;OS to boot by default&quot;. However, that does nothing. [Shows &quot;Windows 7 loader&quot; as an option] (3) but selecting it simply restarts the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;em&gt;parted -l&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Model: ATA WDC WD7500BPKT-7 (scsi)&#xA;Disk /dev/sda: 750GB&#xA;Sector size (logical/physical): 512B/4096B&#xA;Partition Table: msdos&#xA;&#xA;Number  Start   End     Size    Type      File system     Flags&#xA; 1      32.3kB  41.1MB  41.1MB  primary   fat16           diag&#xA; 2      41.9MB  21.2GB  21.2GB  primary   ntfs            boot&#xA; 3      21.2GB  645GB   624GB   primary   ntfs&#xA; 4      645GB   750GB   105GB   extended&#xA; 5      645GB   738GB   92.9GB  logical   ext4&#xA; 6      738GB   750GB   12.0GB  logical   linux-swap(v1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="629" LastEditorUserId="34" LastEditDate="2015-07-29T09:34:25.327" LastActivityDate="2015-07-29T09:34:25.327" Title="Windows no longer available in boot menu after installing elementary OS Freya" Tags="|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="813" PostTypeId="1" AcceptedAnswerId="816" CreationDate="2015-07-27T17:21:01.897" Score="10" ViewCount="5228" Body="&lt;p&gt;I have liked the bash shell that ships default with elementary OS very much. But I would like to change to zsh that is a superset of bash. But I have not found a great guide to switch to zsh or how to install it and use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do have found a few bash install instructions but I don't know if they will work fine. Do I need something else?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://gist.github.com/asifkkhan/86cfa8e348f35c0e6302&quot;&gt;https://gist.github.com/asifkkhan/86cfa8e348f35c0e6302&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://gist.github.com/mkalygin/b3e9de184d83a29a6cd0&quot;&gt;https://gist.github.com/mkalygin/b3e9de184d83a29a6cd0&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="179" LastEditorUserId="190" LastEditDate="2015-07-27T20:21:37.743" LastActivityDate="2018-02-09T23:57:41.230" Title="How to switch to zsh?" Tags="|bash|shell|zsh|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="814" PostTypeId="1" AcceptedAnswerId="824" CreationDate="2015-07-27T17:24:13.887" Score="3" ViewCount="222" Body="&lt;p&gt;I am currently running integrated graphics with an AMD A4 7300 APU. I am looking to upgrade my system with an AMD Athlon X4 860K CPU and a Sapphire R9 270.  Do I need to reinstall elementary OS after the hardware upgrade for hardware recognition or will the new hardware be recognized? &lt;/p&gt;&#xA;" OwnerUserId="591" LastEditorUserId="68" LastEditDate="2015-07-29T20:15:33.947" LastActivityDate="2015-07-29T20:15:33.947" Title="When upgrading hardware, do I need to reinstall elementary OS for hardware recognition?" Tags="|updates|hardware|cpu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="815" PostTypeId="2" ParentId="813" CreationDate="2015-07-27T17:42:17.067" Score="8" Body="&lt;p&gt;I switched yesterday to &lt;code&gt;zsh&lt;/code&gt;, all I had to do, was&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install zsh&#xA;chsh -s $(which zsh)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Close all your terminals afterwards and you are done.&lt;br&gt;&#xA;You can customize your shell further with &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh&quot;&gt;Oh My Zsh&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-07-27T17:42:17.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="816" PostTypeId="2" ParentId="813" CreationDate="2015-07-27T17:44:11.593" Score="13" Body="&lt;ol&gt;&#xA;&lt;li&gt;Run this: &lt;code&gt;sudo apt-get install zsh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Verify where &lt;code&gt;zsh&lt;/code&gt; is by typing &lt;code&gt;whereis zsh&lt;/code&gt;. &lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;chsh&lt;/code&gt; and it'll ask you to type in your password and to enter the new value. If you've verified that &lt;code&gt;zsh&lt;/code&gt; is available on &lt;code&gt;/bin/zsh&lt;/code&gt;, type it in.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Warning:&lt;/strong&gt; Be very careful when typing the path, as an invalid path given to &lt;code&gt;chsh&lt;/code&gt; could cause a lot of problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PWsci.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PWsci.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Final step: Re-login&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2018-02-09T23:57:41.230" LastActivityDate="2018-02-09T23:57:41.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="818" PostTypeId="2" ParentId="814" CreationDate="2015-07-27T18:19:29.447" Score="3" Body="&lt;p&gt;No, not usually. I have switched hard disks between different machines more than once, and that shouldn’t be a problem. The only thing to make sure beforehand might be to see whether your new hardware needs drivers that are definitely not included in the distribution you are going to use.&lt;/p&gt;&#xA;" OwnerUserId="602" LastActivityDate="2015-07-27T18:19:29.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="819" PostTypeId="2" ParentId="812" CreationDate="2015-07-27T18:21:56.460" Score="1" Body="&lt;p&gt;I think your windows partition is &lt;code&gt;/dev/sda3&lt;/code&gt;.&#xA;&lt;code&gt;/dev/sda2&lt;/code&gt; seems to be the dell recovery partition, so can you just try editing grub entry by hitting &lt;code&gt;e&lt;/code&gt; on the windows grub entry and change sda2 to sda3, &lt;code&gt;F10&lt;/code&gt; afterwards and post back please. :)&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-07-27T18:21:56.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="820" PostTypeId="2" ParentId="811" CreationDate="2015-07-27T18:31:15.110" Score="1" Body="&lt;p&gt;Try disabling graphics hardware acceleration:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Edit&lt;/code&gt; &gt; &lt;code&gt;Preferences&lt;/code&gt; &gt; &lt;code&gt;Advanced Tab&lt;/code&gt; &gt; &lt;code&gt;General&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should find the &lt;code&gt;Use hardware acceleration when available&lt;/code&gt; checkbox. Uncheck this checkbox, restart Firefox and see what happens.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-07-27T18:31:15.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="821" PostTypeId="1" CreationDate="2015-07-27T18:51:40.780" Score="2" ViewCount="4542" Body="&lt;p&gt;i really like freya. but i have tried everything and it does not recognize the synaptic touchpad. Help, please?&lt;/p&gt;&#xA;" OwnerUserId="631" LastActivityDate="2016-09-04T08:12:47.717" Title="Touchpad not working on ASUS x550" Tags="|release-freya|touchpad|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="823" PostTypeId="2" ParentId="808" CreationDate="2015-07-27T20:06:03.183" Score="0" Body="&lt;p&gt;Try to return Cerbere to default:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.cerbere monitored-processes ['wingpanel', 'plank', 'slingshot-launcher --silent']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-07-27T20:06:03.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="824" PostTypeId="2" ParentId="814" CreationDate="2015-07-27T20:15:07.193" Score="5" Body="&lt;p&gt;The only main issue : your video graphic card. If you want to change your graphic card, do not forget to uninstall your driver.&lt;/p&gt;&#xA;" OwnerUserId="443" LastActivityDate="2015-07-27T20:15:07.193" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="826" PostTypeId="2" ParentId="742" CreationDate="2015-07-27T21:27:09.900" Score="0" Body="&lt;p&gt;Answer to my own question is: I ran &lt;code&gt;chkdsk&lt;/code&gt; once, and afterwards everything went back to normal, thus I assume I reset a faulty bit.&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2015-07-27T21:27:09.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="827" PostTypeId="2" ParentId="811" CreationDate="2015-07-27T21:31:27.367" Score="2" Body="&lt;p&gt;Well it seems as if the problems went away after installing npm and node. Firefox runs just fine now and I can't really reproduce the earlier state.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-07-27T21:31:27.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="828" PostTypeId="1" AcceptedAnswerId="831" CreationDate="2015-07-27T22:23:43.217" Score="14" ViewCount="3172" Body="&lt;p&gt;Transparency makes the text hard to read, and has zero benefit that I've ever been able to see. How do I turn it off? At least in Pantheon Terminal, ideally wherever it might occur.&lt;/p&gt;&#xA;" OwnerUserId="190" LastEditorUserId="45" LastEditDate="2015-08-18T02:32:35.723" LastActivityDate="2016-10-01T19:05:06.203" Title="How can I disable transparency throughout the UI?" Tags="|settings|themes|pantheon-terminal|accessibility|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="829" PostTypeId="2" ParentId="500" CreationDate="2015-07-27T22:31:18.673" Score="1" Body="&lt;p&gt;I suspect one of the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;logind is not correctly assigning your session a logind session&lt;/li&gt;&#xA;&lt;li&gt;you are not in the &lt;code&gt;adm&lt;/code&gt; group&lt;/li&gt;&#xA;&lt;li&gt;polkit is broken for some other reason&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You can make sure that the second case is not causing an issue by adding your user to the adm group: &lt;code&gt;sudo adduser @USERNAME@ adm&lt;/code&gt; (replace @USERNAME@ with your username).&lt;/p&gt;&#xA;" OwnerUserId="40" LastActivityDate="2015-07-27T22:31:18.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="830" PostTypeId="1" AcceptedAnswerId="832" CreationDate="2015-07-27T22:32:54.103" Score="9" ViewCount="221" Body="&lt;p&gt;My laptop had some issues so I restarted it. Before I did, I ran &lt;code&gt;htop&lt;/code&gt; and killed the process which was using the most of my resources, but I can't remember which one what is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once I turned my laptop back on, this happened:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WYtl6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WYtl6.png&quot; alt=&quot;Files without a sidebar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, my sidebar completely disappeared and I have no idea why nor how to take it back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried purging the &lt;code&gt;pantheon-files&lt;/code&gt; package and installing it again, but that didn't work. It also takes me to the root directory by default instead of my home directory. Running &lt;code&gt;pantheon-files&lt;/code&gt; from the terminal doesn't show anything suspicious.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; This seems to affect only the current user. I tried logging in as guest and this problem was not present.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="26" LastEditDate="2015-09-03T10:20:54.883" LastActivityDate="2015-09-03T10:20:54.883" Title="I just lost a sidebar in Files and I have no idea how that happened" Tags="|pantheon-files|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="831" PostTypeId="2" ParentId="828" CreationDate="2015-07-27T22:38:50.583" Score="19" Body="&lt;p&gt;In order to turn off transparency, open a terminal session and run the following commands, depending on your version of elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;0.4 Loki&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Turn off transparency in WingPanel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.wingpanel use-transparency false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Turn off transparency in Terminal&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings background &quot;rgba(37, 46, 50, 1.0)&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;0.3 Freya&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Turn off transparency in WingPanel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.wingpanel auto-adjust-alpha false&#xA;gsettings set org.pantheon.desktop.wingpanel background-alpha 1.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For this change to have an effect, WingPanel needs to be reloaded (log off &amp;amp; log on again).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Turn off transparency in Terminal&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings opacity 100&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Reset to default&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Use the &lt;code&gt;gsettings reset&lt;/code&gt; command to restore the default value of a setting, for example to turn back on WingPanel transparency in 0.4 Loki:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.desktop.wingpanel use-transparency&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastEditorUserId="68" LastEditDate="2016-10-01T19:05:06.203" LastActivityDate="2016-10-01T19:05:06.203" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="832" PostTypeId="2" ParentId="830" CreationDate="2015-07-27T22:45:35.203" Score="14" Body="&lt;p&gt;I guess, you have accidentally pressed &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;B&lt;/kbd&gt;, it's the short cut for hiding the sidebar.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-07-27T22:45:35.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="833" PostTypeId="2" ParentId="797" CreationDate="2015-07-27T22:48:22.850" Score="40" Body="&lt;p&gt;This is a known bug: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1355274&quot;&gt;Emacs-24 crashes at startup&lt;/a&gt;. Although this bug isn't strictly speaking specific to elementary OS, it is an incompatibility between the graphical toolkit used in the Emacs package on elementary OS and certain themes including the elementary theme, so it is far more likely to happen on elementary OS than elsewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dominic on the discussion of &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=85715&quot;&gt;an old GTK+ bug&lt;/a&gt; notes that setting the environment variable &lt;code&gt;XLIB_SKIP_ARGB_VISUALS&lt;/code&gt; to &lt;code&gt;1&lt;/code&gt; allows Emacs to start. I can confirm this. From the command line, you can thus run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XLIB_SKIP_ARGB_VISUALS=1 emacs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To conveniently set this variable for Emacs only (don't set it globally as it can cause problem with other applications), you can create a launcher. To do that, open Files, navigate to &lt;code&gt;/usr/share/applications&lt;/code&gt; and copy the file “GNU Emacs 24”. Navigate to &lt;code&gt;~/.local/share/applications&lt;/code&gt; and paste the file. If you prefer the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/emacs24.desktop ~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open the file you just copied (&lt;code&gt;~/.local/share/applications/emacs24.desktop&lt;/code&gt;) in a text editor — if Emacs isn't working yet, Scratch will do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/usr/bin/emacs24 %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/usr/bin/env XLIB_SKIP_ARGB_VISUALS=1 emacs24 %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can now launch “GNU Emacs 24” from the launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similarly, if you start the Emacs daemon from your session startup, instead of running &lt;code&gt;emacs --daemon&lt;/code&gt;, run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XLIB_SKIP_ARGB_VISUALS=1 emacs --daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="190" LastActivityDate="2015-07-27T22:48:22.850" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="835" PostTypeId="1" AcceptedAnswerId="837" CreationDate="2015-07-28T07:15:23.620" Score="2" ViewCount="3529" Body="&lt;p&gt;I'm trying to do a full install of elementary OS Freya on a USB 2 drive to create a portable OS. I want the full install so that I can do full upgrades. I've created something similar with Ubuntu GNOME. This works fine but is a little bit unresponsive sometimes. My thought is that elementary OS is a little lighter and would be more responsive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've downloaded the ISO file from  elementary.io and created the Live USB stick using UNetbootin. The Live USB boots fine and works well when I run it in &quot;Try Elementary&quot; mode. I then install from the Live USB going through the steps and selecting &quot;Something else&quot; creating two partitions, one &lt;code&gt;/&lt;/code&gt; that I set as primary, ext4 journal of 11GB and one &lt;code&gt;swap&lt;/code&gt; of 4GB and setting the USB drive as &quot;Device for boot loader&quot;. The installation goes quite slow but it creates a bootable USB drive. However it is almost impossible to use since it runs so slow. It is very slow to load applications etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone with previous experience in doing a full install of elementary OS on an USB drive? Any suggestions what I might be doing wrong? &lt;/p&gt;&#xA;" OwnerUserId="637" LastEditorUserId="75" LastEditDate="2015-07-28T13:52:15.037" LastActivityDate="2015-07-29T09:11:30.587" Title="elementary OS Freya USB full install" Tags="|release-freya|system-installation|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="836" PostTypeId="1" AcceptedAnswerId="838" CreationDate="2015-07-28T08:14:56.527" Score="3" ViewCount="179" Body="&lt;p&gt;I have a problem with Noise.&#xA;When I try to play music the programm say that there isn't the codecs and it trays to install them.&#xA;The codecs are already installed but the system doesn't recognise them.&#xA;I have the same problem with Audiance playing videos.&#xA;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jusuf&lt;/p&gt;&#xA;" OwnerDisplayName="user640" LastEditorDisplayName="user640" LastEditDate="2015-07-28T20:07:45.993" LastActivityDate="2015-07-28T20:07:45.993" Title="Noise doesn't play music [Solved]" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="837" PostTypeId="2" ParentId="835" CreationDate="2015-07-28T08:36:55.193" Score="2" Body="&lt;p&gt;I have a booteable usb with elementary OS,  and it's fast, light and with no issues.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend installing it on a single partition / without swap. The swap partition requires so many hits per use, which eventually damaging the USB in a short period of time, and slows down the performance, since the usb access speed is less than a hard drive or ssd.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="34" LastEditDate="2015-07-29T09:11:30.587" LastActivityDate="2015-07-29T09:11:30.587" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="838" PostTypeId="2" ParentId="836" CreationDate="2015-07-28T09:55:08.597" Score="3" Body="&lt;p&gt;you could try to install the ubuntu restriced extras. This package contains some codecs.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;First, be warned that it might not be legal in some countries, because of software patents.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="158" LastActivityDate="2015-07-28T09:55:08.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="839" PostTypeId="1" CreationDate="2015-07-28T09:59:25.350" Score="1" ViewCount="141" Body="&lt;p&gt;I use Tomahawk music player on Elementary OS Freya.&#xA;Following are the issues i'm facing regarding this palyer:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Player opens up every time, without a maximize button.&lt;/li&gt;&#xA;&lt;li&gt;Player window bottom part(Part containing play/pause buttons and seekbar) goes off screen.&lt;/li&gt;&#xA;&lt;li&gt;No way to resize the player.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Please can anyone shed some light on this issue.&#xA;Any help is much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-08-01T05:51:39.850" Title="Tomahawk music player window bottom goes off screen" Tags="|release-freya|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="840" PostTypeId="2" ParentId="821" CreationDate="2015-07-28T10:16:03.127" Score="2" Body="&lt;p&gt;X55 series uses elantech touchpad. Upgrade to kernel 4.0 or above it will solve the problem. &lt;/p&gt;&#xA;" OwnerUserId="523" LastActivityDate="2015-07-28T10:16:03.127" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="843" PostTypeId="2" ParentId="724" CreationDate="2015-07-28T11:40:37.753" Score="1" Body="&lt;p&gt;Is this a single boot or a dual boot installation?&#xA;You can boot the live distro and manage your drive with gparted. You need to make a uefi partition (fat 32, boot flag) and a seperate one to install your distro to.&#xA;You can fire up the installer from there. When doing a single boot, auto install elementary os and the installer will pick the uefi partition to place the boot files.&#xA;Have you read this link: &lt;a href=&quot;https://help.ubuntu.com/community/UEFI&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/UEFI&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this is helpful.&lt;/p&gt;&#xA;" OwnerUserId="642" LastActivityDate="2015-07-28T11:40:37.753" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="844" PostTypeId="2" ParentId="775" CreationDate="2015-07-28T11:41:45.213" Score="6" Body="&lt;p&gt;To synchronize your account on Google Calendar, you must configure it to accept third party applications. You can find more information at&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/calendar/answer/37648&quot; rel=&quot;nofollow&quot;&gt;Google Calendar Support&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-04-09T02:16:53.993" LastActivityDate="2016-04-09T02:16:53.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="847" PostTypeId="5" CreationDate="2015-07-28T13:06:32.777" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-07-28T13:06:32.777" LastActivityDate="2015-07-28T13:06:32.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="848" PostTypeId="4" CreationDate="2015-07-28T13:06:32.777" Score="0" Body="Places on the Internet where you can learn more about elementary OS." OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-07-28T21:42:30.460" LastActivityDate="2015-07-28T21:42:30.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="849" PostTypeId="1" CreationDate="2015-07-28T13:11:41.387" Score="9" ViewCount="3295" Body="&lt;p&gt;I am completely deaf in one ear, and would like to be able to force mono-output (system-wide) when using headphones. How can I do this? It seems that this is a useful accessibility feature.&lt;/p&gt;&#xA;" OwnerUserId="644" LastEditorUserId="45" LastEditDate="2015-08-01T00:31:15.077" LastActivityDate="2015-08-01T00:31:15.077" Title="How can I force mono sound output?" Tags="|sound|accessibility|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="850" PostTypeId="1" AcceptedAnswerId="851" CreationDate="2015-07-28T13:27:06.023" Score="7" ViewCount="158" Body="&lt;p&gt;Should I type &lt;code&gt;elementary OS&lt;/code&gt; or &lt;code&gt;Elementary OS&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the difference between &lt;code&gt;elementary&lt;/code&gt; and &lt;code&gt;elementary OS&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I call the system &lt;code&gt;eOS&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="5565" LastEditDate="2016-10-06T02:20:43.277" LastActivityDate="2016-10-06T02:20:43.277" Title="How should I type elementary OS? With a lowercase e or an uppercase E?" Tags="|design|elementary-project|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="851" PostTypeId="2" ParentId="850" CreationDate="2015-07-28T13:27:06.023" Score="15" Body="&lt;p&gt;&lt;code&gt;elementary&lt;/code&gt; is the name used for the entire project (operating system and everything else related to it). &lt;code&gt;elementary OS&lt;/code&gt; is just the name of the operating system, not the entire project.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary's team prefers typing its name with a lowercase &lt;code&gt;e&lt;/code&gt; for consistency. So, you should always type &lt;code&gt;elementary&lt;/code&gt; instead of &lt;code&gt;Elementary&lt;/code&gt; (even if it's in the beginning of the sentence).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary's team prefers that you do not refer to &lt;code&gt;elementary OS&lt;/code&gt; as &lt;code&gt;eOS&lt;/code&gt; because that kind of mimics Apple's &lt;code&gt;iThings&lt;/code&gt;, KDE's &lt;code&gt;KThis&lt;/code&gt; and GNOME's &lt;code&gt;GThat&lt;/code&gt; trends, which they're trying to avoid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://blog.elementary.io/post/107640994166/the-importance-of-our-brand&quot; rel=&quot;nofollow noreferrer&quot;&gt;The Importance of Our Brand&lt;/a&gt; (Internal Branding Guidelines section)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further reading: &lt;a href=&quot;https://elementaryos.meta.stackexchange.com/questions/5/lets-enforce-branding-guidelines-in-edits&quot;&gt;Let's enforce branding guidelines in edits&lt;/a&gt; (meta post)&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="-1" LastEditDate="2017-03-16T16:43:34.427" LastActivityDate="2015-08-02T13:11:18.927" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="852" PostTypeId="1" AcceptedAnswerId="3701" CreationDate="2015-07-28T14:03:39.520" Score="1" ViewCount="203" Body="&lt;p&gt;I have a MacbookPro5,3 (C2D 2.66, 64 bits EFI, 8GB RAM, nVidia 9400m &amp;amp; 9600m GT) and I am unable to boot into elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried both with Apple's boot manager and rEFInd to no avail. I am able to select the USB drive where my Freya image is and then select either Try elementary OS or Install elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In all cases, the blinking &quot;e&quot; logo shows, blinks 3-4 times, then the LCD's brightness turns to the maximum and everything hangs. I waited and waited, nothing happens, I have to reset the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing? Why can't I boot elementary?&lt;/p&gt;&#xA;" OwnerUserId="645" LastActivityDate="2016-05-21T05:11:48.677" Title="MacbookPro5,3 (mid-2009) won't boot elementary OS" Tags="|system-installation|macintosh|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="853" PostTypeId="1" AcceptedAnswerId="854" CreationDate="2015-07-28T14:04:28.813" Score="5" ViewCount="6769" Body="&lt;p&gt;I don't need all of the default shown indicator icons. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y6Cex.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y6Cex.png&quot; alt=&quot;Indicator icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I hide some of them, such as the icon for Geary email client (shown by the bell)?&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2020-08-18T02:40:24.537" Title="How can I hide some indicator icons?" Tags="|wingpanel|" AnswerCount="2" CommentCount="4" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="854" PostTypeId="2" ParentId="853" CreationDate="2015-07-28T14:24:23.720" Score="7" Body="&lt;p&gt;Well, first of all, that's not a Geary indicator, that's &lt;code&gt;indicator-messages&lt;/code&gt; and it has a lot more functionality than just displaying Geary notifications. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To delete it completely from your system, you can execute this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove indicator-messages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After it, all you need to do is to re-login (I have just tested this and it works).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Names of other default indicators:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;indicator-power&lt;/code&gt; (the battery icon)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;indicator-bluetooth&lt;/code&gt; (the Bluetooth icon)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;indicator-datetime&lt;/code&gt; (date and time indicator in the center of Wingpanel)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;indicator-sound&lt;/code&gt; (self-explanatory)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;network-manager-gnome&lt;/code&gt; (network icon)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Alternatively, if you just want to disable their startup but not remove them from the system, you could try to go to &lt;code&gt;/etc/xdg/autostart&lt;/code&gt; and delete their &lt;code&gt;.desktop&lt;/code&gt; files (note: I haven't tested this method).&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="37" LastEditDate="2015-07-28T16:06:15.773" LastActivityDate="2015-07-28T16:06:15.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="855" PostTypeId="1" AcceptedAnswerId="17220" CreationDate="2015-07-28T15:37:06.783" Score="3" ViewCount="5533" Body="&lt;p&gt;Is there a tweak that allows me to boost the volume above 100% without having to go to &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Sound&lt;/code&gt; every time?&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2021-06-18T16:21:53.173" Title="Can I boost the volume above 100% without going into System Settings?" Tags="|sound|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="856" PostTypeId="2" ParentId="855" CreationDate="2015-07-28T15:37:06.783" Score="2" Body="&lt;p&gt;Surprisingly, yes!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, open up &lt;code&gt;dconf-editor&lt;/code&gt; (if you don't have it yet, you can install it with &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, navigate through &lt;code&gt;com&lt;/code&gt; -&gt; &lt;code&gt;ubuntu&lt;/code&gt; -&gt; &lt;code&gt;sound&lt;/code&gt; and enable the &lt;code&gt;allow-amplified-volume&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By doing so, you'll be able to increase the volume above 100% by using the Wingpanel's sound indicator. However, you still won't be be able to use the multimedia keys on your keyboard to go above 100%.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Credits: &lt;a href=&quot;https://plus.google.com/106709818726750214323/posts/9y23kpJc7D8&quot; rel=&quot;nofollow noreferrer&quot;&gt;Duong Phan posted this&lt;/a&gt; in elementary's Google+ community.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2017-11-30T16:40:40.510" LastActivityDate="2017-11-30T16:40:40.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="858" PostTypeId="2" ParentId="852" CreationDate="2015-07-28T16:29:44.140" Score="0" Body="&lt;p&gt;Hmmm. My guess is there's something wrong with your iso and/or something wrong with the bootloader on the bootable usb (no kidding, right?) Try using a different program to create your bootable usb. I had to do this too.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2015-07-28T16:29:44.140" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="859" PostTypeId="2" ParentId="796" CreationDate="2015-07-28T17:03:41.387" Score="0" Body="&lt;p&gt;I also had a similar problem, and I &lt;em&gt;think&lt;/em&gt; it was a conflict between my usb mouse and my touchpad. I would be using my usb mouse, and all of the sudden your problem would happen to me. I disabled my touchpad in settings (since it doesn't work that well anyway since I spilled coffee on it) and I haven't had the problem since.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2015-07-28T17:03:41.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="860" PostTypeId="1" AcceptedAnswerId="862" CreationDate="2015-07-28T17:41:45.083" Score="9" ViewCount="4153" Body="&lt;p&gt;I have been able to add my main Google Calendar to the calendar app, but I cannot add secondary calendars. I have attempted to &lt;code&gt;sudo apt-get install evolution-data-server-pantheon-online-accounts&lt;/code&gt; but it comes back saying there is no package. Any help?&lt;/p&gt;&#xA;" OwnerUserId="647" LastEditorUserId="45" LastEditDate="2015-07-28T19:03:09.030" LastActivityDate="2020-01-07T09:39:42.193" Title="How can I add multiple google calendars to the calendar?" Tags="|calendar|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="861" PostTypeId="1" CreationDate="2015-07-28T19:16:52.640" Score="2" ViewCount="2634" Body="&lt;p&gt;Could anyone provide some tips on how to make elementary OS run faster and use less memory? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically I am running it on a netbook Asus Eee PC 1005HA with an Intel Atom processor (single core) and 2 GB RAM, which I know is fairly limited. The system feels quite slow, especially launching apps. Using Facebook and watching videos on Youtube is also laggy.&lt;/p&gt;&#xA;" OwnerUserId="648" LastEditorUserId="68" LastEditDate="2015-07-29T18:20:50.160" LastActivityDate="2015-07-29T18:20:50.160" Title="How can I optimize elementary for slow computers?" Tags="|performance|" AnswerCount="0" CommentCount="10" ClosedDate="2015-07-28T21:44:44.693" ContentLicense="CC BY-SA 3.0" />
  <row Id="862" PostTypeId="2" ParentId="860" CreationDate="2015-07-28T19:22:26.347" Score="10" Body="&lt;p&gt;There is currently a &lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1356869&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug&lt;/a&gt; that you can only add one calendar of your Google account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But you can add multiple Google Calendars to Maya via CalDAV.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/go4S6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/go4S6.png&quot; alt=&quot;Add CalDav Calendar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;URL: &lt;code&gt;https://apidata.googleusercontent.com/caldav/v2/&lt;/code&gt;&lt;strong&gt;calendarID&lt;/strong&gt;&lt;code&gt;/events&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;User: is your email-address&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The calendarID is your email (for your main calendar).&#xA;For other calendars you can find it in your Google Calendar &gt; Settings &gt; Calendars &gt; Choose your calendar and then under Calendar Address in brackets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MbFcn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MbFcn.png&quot; alt=&quot;find Google CalendarID&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="227" LastEditDate="2016-11-16T07:48:55.833" LastActivityDate="2016-11-16T07:48:55.833" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="863" PostTypeId="1" CreationDate="2015-07-26T03:37:24.527" Score="1" ViewCount="1187" Body="&lt;p&gt;I have partitioned my disks like &lt;a href=&quot;https://i.stack.imgur.com/l6YKv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;so&lt;/a&gt;. My plan was to install elementary OS Freya on my larger 1TB driver under the 64GB partition. When I go to install it, I get &lt;a href=&quot;https://i.stack.imgur.com/nV0iF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;. My secondary disk is being detected as all free space. Is there something I have to do regarding LDM? Thank you so much!&lt;/p&gt;&#xA;" OwnerDisplayName="Logan" LastEditorUserId="138" LastEditDate="2015-07-28T20:00:58.813" LastActivityDate="2015-07-29T09:34:19.010" Title="Help Installing elementary in dual boot on secondary hard drive that has stuff on it" Tags="|system-installation|dual-boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="864" PostTypeId="2" ParentId="863" CreationDate="2015-07-28T20:05:37.533" Score="1" Body="&lt;p&gt;I have already answered a similar question &lt;a href=&quot;https://askubuntu.com/questions/653353/partition-not-shown-correctly-in-ubuntu-14-04-02-lts-installer-wifi-network-no/653361#653361&quot;&gt;here&lt;/a&gt;. If you are running Windows try creating an 'ext4' partition on the unallocated space. I was facing similar problem with Windows 8 but creating a partition beforehand solved the problem. Personally i use &lt;a href=&quot;http://www.partitionwizard.com/free-partition-manager.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Minitools Partition Manager&lt;/a&gt; as the windows partition manager does not allow creating an ext4 partition.&lt;/p&gt;&#xA;" OwnerUserId="650" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-28T20:05:37.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="865" PostTypeId="1" CreationDate="2015-07-28T20:41:45.287" Score="5" ViewCount="1145" Body="&lt;p&gt;I have a problem which really bugs me. My laptop speakers work perfectly, but whenever I plug in my headphones, there's just no sound. Nothing is muted, my settings are good, so I really don't know why this happens. I also have Windows installed on my laptop, and whenever I plug them in while running Windows, they work. (I use freya)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have an idea why this happens and/or a solution? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="651" LastActivityDate="2016-10-02T04:11:21.377" Title="No sound when plugging in headphones" Tags="|release-freya|sound|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="866" PostTypeId="2" ParentId="860" CreationDate="2015-07-28T21:35:25.837" Score="2" Body="&lt;p&gt;Maya Calendar, also knows as Calendar, has a plugin named maya-calendar-plugin-google, installed by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can go to options and add multiples accounts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to add them, they must configured to thirdy party applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/calendar/answer/37648&quot; rel=&quot;nofollow&quot;&gt;Google Calendar Support &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-07-28T21:35:25.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="867" PostTypeId="1" CreationDate="2015-07-28T22:45:13.580" Score="3" ViewCount="223" Body="&lt;p&gt;I have a Horize P370M laptop that I installed elementary OS Freya over the top of a Luna install around two months ago.  This morning, when trying to boot in from Grub I get the following message and cannot log in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[5.176647] EXT4 fs error (device sda5): ext4_ext_check_inode:479: inode #1310899: comm ureadahead: pblko bad header/extent: invalid magic-magic 0, entries 83, max 4(0), depth 0(0)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My Linux foo has failed on this error - is there any way to fix this or is it a rebuild of Freya that is required?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mark&lt;/p&gt;&#xA;" OwnerUserId="654" LastEditorUserId="68" LastEditDate="2015-07-29T19:30:09.460" LastActivityDate="2016-02-16T20:50:35.737" Title="Boot fails with ext4 filesystem error, unable to log in" Tags="|release-freya|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="869" PostTypeId="1" CreationDate="2015-07-28T23:08:30.847" Score="3" ViewCount="844" Body="&lt;p&gt;How to fix this problem with the resolution of LightDM an additional monitor?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lightdm 1.10.5&#xA;&#xA;    Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767&#xA;    LVDS1 connected (normal left inverted right x axis y axis)&#xA;       1280x800       60.0 +   50.0  &#xA;       1024x768       60.0  &#xA;       800x600        60.3     56.2  &#xA;       640x480        59.9  &#xA;    VGA1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 477mm x 268mm&#xA;       1920x1080      60.0*+&#xA;       1680x1050      60.0  &#xA;       1600x900       60.0  &#xA;       1280x1024      75.0     60.0  &#xA;       1280x960       60.0  &#xA;       1280x800       59.8  &#xA;       1152x864       75.0  &#xA;       1280x720       60.0  &#xA;       1024x768       75.1     60.0  &#xA;       1024x576       60.0  &#xA;       832x624        74.6  &#xA;       800x600        75.0     60.3  &#xA;       640x480        75.0     60.0  &#xA;       720x400        70.1  &#xA;    HDMI1 disconnected (normal left inverted right x axis y axis)&#xA;    DP1 disconnected (normal left inverted right x axis y axis)&#xA;    HDMI2 disconnected (normal left inverted right x axis y axis)&#xA;    HDMI3 disconnected (normal left inverted right x axis y axis)&#xA;    DP2 disconnected (normal left inverted right x axis y axis)&#xA;    DP3 disconnected (normal left inverted right x axis y axis)&#xA;    VIRTUAL1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ocsa6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ocsa6.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="656" LastEditorUserId="129" LastEditDate="2015-07-29T10:41:44.597" LastActivityDate="2015-07-29T10:41:44.597" Title="Resolution of LightDM an additional monitor - Elementary OS Freya" Tags="|release-freya|display|resolution|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-07T21:11:17.583" ContentLicense="CC BY-SA 3.0" />
  <row Id="870" PostTypeId="1" CreationDate="2015-07-28T23:16:19.860" Score="1" ViewCount="165" Body="&lt;p&gt;I use Private Tunnel VPN. The &lt;a href=&quot;https://www.privatetunnel.com/home/support/&quot; rel=&quot;nofollow&quot;&gt;support website&lt;/a&gt; (under Connection questions: How do I connect to PrivateTunnel using Ubuntu Linux?) recommends this for Ubuntu :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;h2&gt;Configuring Network Manager to Validate Server Certificates&lt;/h2&gt;&#xA;  &#xA;  &lt;p&gt;Since the&#xA;  default configuration cannot validate server certificates properly, it&#xA;  is possible for someone to impersonate as PrivateTunnel and compromise&#xA;  your data integrity. For this reason, it is strongly recommended that&#xA;  you apply the patch below so that server certificates are validated&#xA;  prior to a successful connection. To do this, copy and paste the&#xA;  command below into a Terminal window (this patch will have to be&#xA;  reapplied if you upgrade your operating system or if the plugin is&#xA;  upgraded to a new version):&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv /usr/sbin/openvpn /usr/local/sbin; echo -e '#!/bin/bash\n/usr/local/sbin/openvpn $* --ns-cert-type server &amp;amp;\ntrap &quot;kill $!&quot; EXIT\nwait $!\n' &amp;gt; /usr/sbin/openvpn; chmod +x /usr/sbin/openvpn&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Will i need to do this in elementary OS Freya?&lt;/p&gt;&#xA;" OwnerUserId="653" LastEditorUserId="68" LastEditDate="2015-07-29T19:21:20.100" LastActivityDate="2015-08-01T20:25:34.560" Title="Do I have to patch PrivateTunnel OpenVPN so that certificates are validated?" Tags="|release-freya|openvpn|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="871" PostTypeId="1" AcceptedAnswerId="872" CreationDate="2015-07-29T01:36:27.860" Score="10" ViewCount="3083" Body="&lt;p&gt;For those who don't know what's Fish shell here's the &lt;a href=&quot;http://fishshell.com/&quot;&gt;home page&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to install it and make it default. But under their homepage when I click on download I'm redirected to the ppa page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I install it?&lt;/p&gt;&#xA;" OwnerUserId="80" LastEditorUserId="80" LastEditDate="2015-07-29T17:39:40.840" LastActivityDate="2020-11-06T11:44:33.020" Title="How to install Fish shell" Tags="|pantheon-terminal|shell|fish|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="872" PostTypeId="2" ParentId="871" CreationDate="2015-07-29T01:36:27.860" Score="12" Body="&lt;p&gt;It's pretty easy, first add the fish shell repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:fish-shell/release-3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then just updated your repos:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now we can install it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;One more command and we are done:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;chsh -s /usr/bin/fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This last command will switch your default shell to fish. To see the changes close your terminal and open it again. If you didn't notice any changes try logging out and logging in.&lt;/p&gt;&#xA;&lt;h2&gt;Bonus tip: Fisher&lt;/h2&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/jorgebucaran/fisher&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fisher&lt;/a&gt; is a concurrent plugin manager for the fish shell, it supports Oh My Fish plugins, it's fast, and powerful.&lt;/p&gt;&#xA;&lt;p&gt;To install it run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL git.io/fisher | source &amp;amp;&amp;amp; fisher install jorgebucaran/fisher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr&gt;&#xA;&lt;h2&gt;Bonus tip: Oh My Fish&lt;/h2&gt;&#xA;&lt;p&gt;If you know &lt;a href=&quot;http://www.zsh.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;zsh&lt;/a&gt; you probably know &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh&quot; rel=&quot;nofollow noreferrer&quot;&gt;Oh My Zsh&lt;/a&gt;, well fish has a similar port, named &lt;a href=&quot;https://github.com/oh-my-fish/oh-my-fish&quot; rel=&quot;nofollow noreferrer&quot;&gt;Oh My Fish&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;To install it run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl -L https://github.com/oh-my-fish/oh-my-fish/raw/master/bin/install | fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;A side note, when you do this your fish shell configs are overwritten, quoting the README file:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;NOTE: The installation script renames your existing config.fish to config.orig, and replaces it with &lt;a href=&quot;https://github.com/oh-my-fish/oh-my-fish/blob/master/templates/config.fish&quot; rel=&quot;nofollow noreferrer&quot;&gt;the default oh-my-fish config&lt;/a&gt;. If you have existing customizations to your fish config, you will need to manually include those customizations after the install.&lt;/p&gt;&#xA;&lt;p&gt;If you want to install it manually, &lt;a href=&quot;https://github.com/oh-my-fish/oh-my-fish/wiki/Manual-Installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;click here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt;&#xA;If by any reason you need to get back to your old bash friend, just type &lt;code&gt;bash&lt;/code&gt; on your terminal, this will switch temporarily to bash, if you type &lt;code&gt;exit&lt;/code&gt; or close the tab/terminal it will switch back to fish.&lt;/p&gt;&#xA;" OwnerUserId="80" LastEditorUserId="4861" LastEditDate="2020-11-06T11:44:33.020" LastActivityDate="2020-11-06T11:44:33.020" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="873" PostTypeId="2" ParentId="867" CreationDate="2015-07-29T02:26:56.140" Score="4" Body="&lt;p&gt;I did a little bit of a look around and found little that could help.  I returned and ran &lt;code&gt;fsck&lt;/code&gt; manually and was able to clear the issue!  Yay me!  My Linux Foo did not abandon me...&lt;/p&gt;&#xA;" OwnerUserId="654" LastEditorUserId="3757" LastEditDate="2016-02-16T20:50:35.737" LastActivityDate="2016-02-16T20:50:35.737" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="875" PostTypeId="2" ParentId="863" CreationDate="2015-07-29T04:51:16.400" Score="1" Body="&lt;p&gt;Although I have not tried this in conjunction with Windows 8, I do use this method with Vista and Windows 7. Not saying its the best way, just that it works best for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using Windows disk manager I shrink my partition to create the amount of free space that I want for Linux. I actually make sure I create free space, not another partition but actual free space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once that is done I boot up the Linux live disk or installer and tell the distro to use all of the free space. I find distributions like Ubuntu or elementary OS typically identify and automatically want to install into the free space very nicely. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I would recommend is to have a Windows boot disk/repair disk so that if you need to remove the Linux distribution you can FIRST repair the Windows boot files/partitions. Then once the computer boots from the Windows boot menu (not Grub) then you can just remove the partitions using Windows Disk Manager and expand the Windows partition if so desired.&lt;/p&gt;&#xA;" OwnerUserId="660" LastEditorUserId="34" LastEditDate="2015-07-29T09:34:19.010" LastActivityDate="2015-07-29T09:34:19.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="876" PostTypeId="1" AcceptedAnswerId="1846" CreationDate="2015-07-29T07:36:13.280" Score="11" ViewCount="16923" Body="&lt;p&gt;I would like to get Plank and Wingpanel on both screens of my dual monitor set up without mirroring my screens. How can I do this?&lt;/p&gt;&#xA;" OwnerUserId="128" LastActivityDate="2021-01-01T22:34:54.940" Title="How can I get Plank and Wingpanel on both monitors without Mirroring Screens" Tags="|plank|wingpanel|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="877" PostTypeId="2" ParentId="876" CreationDate="2015-07-29T07:53:43.203" Score="-2" Body="&lt;p&gt;I don't know about Wingpanel, but Heath Paddock wrote this tutorial for Plank. &lt;a href=&quot;https://heathpaddock.com/?p=761&quot; rel=&quot;nofollow&quot;&gt;https://heathpaddock.com/?p=761&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13" LastActivityDate="2015-07-29T07:53:43.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="879" PostTypeId="1" AcceptedAnswerId="884" CreationDate="2015-07-29T13:59:25.803" Score="3" ViewCount="568" Body="&lt;p&gt;How can I control pointer using keyboard instead of mouse on elementary OS Freya?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Universal Access &gt; Pointing and Clicking &gt; Mouse keys (turn on) ... yeah it works but pointer's speed is ridiculously slow and Options sections and Mouse settings are not available. Any third party application can handle it or maybe exist native or more traditional solution for that?&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="45" LastEditDate="2015-08-01T00:49:46.517" LastActivityDate="2015-08-01T00:49:46.517" Title="Control pointer using keyboard on Freya" Tags="|mouse|keyboard|accessibility|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="880" PostTypeId="1" AcceptedAnswerId="891" CreationDate="2015-07-29T13:59:44.967" Score="12" ViewCount="4504" Body="&lt;p&gt;elementary locks the screen after about 15 minutes of &quot;inactivity&quot;, except the activity I'm doing is watching videos (no keyboard or mouse inputs during that lapse).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Site in question is Crunchyroll (uses flash plugin) running on Chromium in fullscreen mode on a secondary display (a 720p TV) via HDMI. AdBlock activated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Behavior: right in the middle of an episode (12 to 15 minutes) the TV screen suddenly goes No Input. Main display (laptop screen) shows Login screen. Upon entering my password, video resumes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My workaround to this is that I randomly move the mouse from time to time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I do anything special to prevent screen/session locking?&lt;/p&gt;&#xA;" OwnerUserId="425" LastActivityDate="2015-12-29T13:20:51.333" Title="Prevent screen locking while watching videos" Tags="|greeter|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="881" PostTypeId="2" ParentId="880" CreationDate="2015-07-29T14:17:51.697" Score="4" Body="&lt;p&gt;Try to use &lt;a href=&quot;https://launchpad.net/caffeine&quot; rel=&quot;nofollow&quot;&gt;Caffeine&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A status bar application able to temporarily prevent the activation of both the screensaver and the &quot;sleep&quot; powersaving mode.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:caffeine-developers/ppa &#xA;sudo apt-get update&#xA;sudo apt-get install caffeine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT: Currently, this method doesn't work on Freya.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-07-31T04:53:06.723" LastActivityDate="2015-07-31T04:53:06.723" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="882" PostTypeId="2" ParentId="713" CreationDate="2015-07-29T14:39:52.630" Score="4" Body="&lt;p&gt;So, I find out what to do. First I need to download the vivaldi .deb file from the official website and place it on my home folder. Them run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -i vivaldi*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will install vivaldi agian with the dependencies. Now you can remove it using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get remove vivaldi-preview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="304" LastActivityDate="2015-07-29T14:39:52.630" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="883" PostTypeId="2" ParentId="849" CreationDate="2015-07-29T14:45:08.397" Score="3" Body="&lt;p&gt;There is no easy or quick solution to set the audio output to mono.&#xA;But you could try the link below. It is from the ubuntu forum because elementary freya is based on ubuntu 14.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/17791/can-i-downmix-stereo-audio-to-mono&quot;&gt;Mix stereo to mono (Ask Ubuntu)&lt;/a&gt;&lt;br&gt;&#xA;The first answer sounds promising.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please give us a feedback if this solution works. Thanks&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-07-29T14:45:08.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="884" PostTypeId="2" ParentId="879" CreationDate="2015-07-29T15:25:02.327" Score="4" Body="&lt;h2&gt;Explanation&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;xkbset&lt;/strong&gt; can be used to set various options available  in  the  XKB&#xA;       extensions.   This  includes such things as mousekeys where one can use&#xA;       the numeric pad keys to move the mouse;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Execution&lt;/h2&gt;&#xA;&#xA;&lt;h3&gt;Open Terminal&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;install xkbset with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xkbset  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after successfull installation type: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xkbset ma 60 10 10 5 2   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or try your own values. here the options &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xkbset ma [delay] [interval] [time to max] [max speed] [curve]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Note&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;after every shutdown or reboot you had to activate it again or you create a little autostart option&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Autostart &lt;code&gt;xkbset ma 60 10 10 5 2&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;go to &lt;code&gt;Settings -&amp;gt; applications -&amp;gt; autostart&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;there you can add an application to start after login. We use the custom command field to&#xA;enter our command like the picture below&lt;/li&gt;&#xA;&lt;li&gt;after entering the command press enter to activate it.  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xNDdo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xNDdo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorUserId="158" LastEditDate="2015-07-29T19:41:59.720" LastActivityDate="2015-07-29T19:41:59.720" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="885" PostTypeId="1" AcceptedAnswerId="889" CreationDate="2015-07-29T16:12:02.753" Score="7" ViewCount="424" Body="&lt;p&gt;Basically the title. How can I clear or edit the playlist in Videos/Audience. I can't see any button or anything that clears it. This seems like basic functionality but I can't find it.&lt;/p&gt;&#xA;" OwnerUserId="484" LastActivityDate="2015-10-15T21:46:31.310" Title="How do I clear the playlist in Videos?" Tags="|videos|audience|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="887" PostTypeId="5" CreationDate="2015-07-29T18:03:50.100" Score="0" Body="&lt;p&gt;The friendly interactive shell (fish) is a Unix shell that attempts to be more interactive and user-friendly than former shells. The design goal of fish is to give the user a rich set of powerful features in a way that is easy to discover, remember, and use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This tag should be used for questions related to fish shell and elementaryOS. fish shell bugs shoud be reported on &lt;a href=&quot;https://launchpad.net/~fish-shell&quot; rel=&quot;nofollow&quot;&gt;launchpad&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Features&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Advanced tab completion.&lt;/li&gt;&#xA;&lt;li&gt;Syntax highlighting with extensive error checking.&lt;/li&gt;&#xA;&lt;li&gt;Support for the X clipboard.&lt;/li&gt;&#xA;&lt;li&gt;Smart terminal handling based on terminfo.&lt;/li&gt;&#xA;&lt;li&gt;Searchable command history.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Version 2 adds:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Autosuggestions&lt;/li&gt;&#xA;&lt;li&gt;256 terminal colors&lt;/li&gt;&#xA;&lt;li&gt;Web-based configuration&lt;/li&gt;&#xA;&lt;li&gt;Improved performance (by having more builtins).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Links and documentation&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://fishshell.com/&quot; rel=&quot;nofollow&quot;&gt;Homepage&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://fishshell.com/docs/current/index.html&quot; rel=&quot;nofollow&quot;&gt;Documentation&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/~fish-shell/+archive/ubuntu/release-2/+packages&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Friendly_interactive_shell&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/oh-my-fish/oh-my-fish&quot; rel=&quot;nofollow&quot;&gt;Oh My Fish!&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="80" LastEditorUserId="80" LastEditDate="2015-07-29T18:47:37.653" LastActivityDate="2015-07-29T18:47:37.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="888" PostTypeId="4" CreationDate="2015-07-29T18:03:50.100" Score="0" Body="fish is a user friendly commandline shell intended mostly for interactive use." OwnerUserId="80" LastEditorUserId="80" LastEditDate="2015-07-29T18:47:42.023" LastActivityDate="2015-07-29T18:47:42.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="889" PostTypeId="2" ParentId="885" CreationDate="2015-07-29T18:26:46.487" Score="7" Body="&lt;p&gt;I think you are right. There is no button or command on the gui to delete the played videos.   &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;But you can delete the last played videos over the terminal with following command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.audience last-played-videos []&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="158" LastActivityDate="2015-07-29T18:26:46.487" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="890" PostTypeId="1" CreationDate="2015-07-29T19:25:05.233" Score="7" ViewCount="118" Body="&lt;p&gt;I found some network type icons (4G, 3G, H, E, G):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4QFFX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4QFFX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it somehow possible to display the current network type in wingpanel?&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-07-29T19:25:05.233" Title="Is it possible to show network type in wingpanel?" Tags="|wingpanel|" AnswerCount="0" CommentCount="3" ClosedDate="2015-08-01T06:51:53.290" ContentLicense="CC BY-SA 3.0" />
  <row Id="891" PostTypeId="2" ParentId="880" CreationDate="2015-07-29T19:49:57.010" Score="8" Body="&lt;h1&gt;lightsOn&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;There is a litte bash script called &lt;a href=&quot;https://github.com/Innenseide/lightsOn&quot;&gt;&lt;em&gt;lightsOn&lt;/em&gt;&lt;/a&gt; on GitHub, which automatically checks on various apps, including fullscreen Flash and html5 video. (It works for me.)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Bash script managing screensaver and display power management (DPMS) on different conditions (fullscreen videos, specific applications, specific outputs). &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To use the program save the file &lt;a href=&quot;https://raw.githubusercontent.com/Innenseide/lightsOn/master/lightsOn.sh&quot;&gt;&lt;code&gt;lightsOn.sh&lt;/code&gt;&lt;/a&gt; in your home directory, make it executable by typing &lt;code&gt;chmod +x ~/lightsOn.sh&lt;/code&gt; and run it &lt;code&gt;~/lightsOn.sh 300&lt;/code&gt; (this will check every 300 seconds = 5 minutes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it works you can add the script to startup by adding &lt;code&gt;~/lightsOn.sh 300&lt;/code&gt; in System Settings &gt; Applications &gt; Startup.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The script detects a variety of apps / usages, you can configure (among other options) detecting certain things right in the shell script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Modify these variables if you want this script to detect if MPV, Mplayer,&#xA;# VLC, Minitube, Totem or a web browser Flash/HTML5 Video.&#xA;mplayer_detection=1&#xA;mpv_detection=1&#xA;vlc_detection=1&#xA;totem_detection=1&#xA;firefox_flash_detection=1&#xA;firefox_html5_detection=1&#xA;chromium_flash_detection=1&#xA;chromium_html5_detection=1&#xA;chromium_pepper_flash_detection=1&#xA;chrome_pepper_flash_detection=1&#xA;chrome_html5_detection=1&#xA;opera_flash_detection=1&#xA;opera_html5_detection=1&#xA;yandexBrowser_html5_flash_detection=1&#xA;epiphany_html5_detection=1&#xA;webkit_flash_detection=1&#xA;minitube_detection=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-29T20:08:58.790" LastActivityDate="2015-07-29T20:08:58.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="892" PostTypeId="1" AcceptedAnswerId="893" CreationDate="2015-07-29T23:41:13.280" Score="9" ViewCount="11696" Body="&lt;p&gt;I would like to change the mouse cursor theme that is used, both in my session and in the login screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example &lt;a href=&quot;http://kde-look.org/content/show.php/Breeze?content=165371&quot;&gt;Breeze&lt;/a&gt; instead of the standard one called &quot;elementary&quot; (similar to DMZ Black).&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2018-06-30T17:44:11.410" Title="How to change the mouse cursor theme?" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="893" PostTypeId="2" ParentId="892" CreationDate="2015-07-29T23:41:13.280" Score="6" Body="&lt;p&gt;&lt;em&gt;The following answer uses &lt;code&gt;Breeze&lt;/code&gt; as an example, don't forget it to replace it with the name of the theme you actually want to install.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;For all users&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;To install an icon theme download it and move the theme directory (containing a file called &lt;code&gt;index.theme&lt;/code&gt; or &lt;code&gt;cursor.theme&lt;/code&gt;) to &lt;code&gt;/usr/share/icons/&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a Terminal. First put the name of the cursor theme you want to install into the variable &lt;code&gt;THEMENAME&lt;/code&gt;. Then set &lt;code&gt;FILENAME&lt;/code&gt; to either &lt;code&gt;index.theme&lt;/code&gt; or &lt;code&gt;cursor.theme&lt;/code&gt; depending on the filename in the theme directory. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;THEMENAME=Breeze&#xA;FILENAME=index.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should make sure that permissions are correct after copying the theme, so run &lt;code&gt;chown -hR root:root /usr/share/icons/&quot;$THEMENAME&quot;&lt;/code&gt; (&lt;a href=&quot;http://manpages.ubuntu.com/manpages/vivid/en/man3/chown&quot; rel=&quot;nofollow&quot;&gt;chown&lt;/a&gt; changes the owner of a files / directories) and &lt;code&gt;chmod -R 755 /usr/share/icons/&quot;$THEMENAME&quot;&lt;/code&gt; (&lt;a href=&quot;http://manpages.ubuntu.com/manpages/trusty/en/man3/chmod&quot; rel=&quot;nofollow&quot;&gt;chmod&lt;/a&gt; changes permissions to read, write and execute).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the used theme by entering the following in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface cursor-theme &quot;$THEMENAME&quot;&#xA;&#xA;sudo update-alternatives --install /usr/share/icons/default/index.theme x-cursor-theme /usr/share/icons/&quot;$THEMENAME&quot;/&quot;$FILENAME&quot; 21&#xA;&#xA;sudo update-alternatives --set x-cursor-theme /usr/share/icons/&quot;$THEMENAME&quot;/&quot;$FILENAME&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You probably need to reboot for all changes to take effect.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Only for current user&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;To install an icon theme download it and move the theme directory (containing a file called &lt;code&gt;index.theme&lt;/code&gt; or &lt;code&gt;cursor.theme&lt;/code&gt;) to &lt;code&gt;~/.icons/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a Terminal and put the name of the cursor theme you want to install into the variable &lt;code&gt;THEMENAME&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;THEMENAME=Breeze&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change the used theme by entering the following in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface cursor-theme &quot;$THEMENAME&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Related known bugs&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1395935&quot; rel=&quot;nofollow&quot;&gt;(Pantheon) Files currently has a bug where a custom cursor theme is not properly applied.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-31T09:52:13.880" LastActivityDate="2015-07-31T09:52:13.880" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="894" PostTypeId="1" AcceptedAnswerId="934" CreationDate="2015-07-30T01:59:01.810" Score="6" ViewCount="366" Body="&lt;p&gt;I downloaded &lt;a href=&quot;http://gamejolt.com/games/maximum-velocity/33960&quot; rel=&quot;nofollow&quot;&gt;this game&lt;/a&gt;, and it simply does nothing when I try to run it. No error, nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to see what was wrong by running it with the command &quot;ldd&quot; and it gave me this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;wayne@wayne-iMac:~$ ldd /home/wayne/Downloads/MaximumVelocityLinux/MaximumVelocity.x86&#xA;      linux-gate.so.1 =&gt;  (0xf76e3000)&#xA;      libdl.so.2 =&gt; /lib/i386-linux-gnu/libdl.so.2 (0xf76bf000)&#xA;      libpthread.so.0 =&gt; /lib/i386-linux-gnu/libpthread.so.0 (0xf76a3000)&#xA;      librt.so.1 =&gt; /lib/i386-linux-gnu/librt.so.1 (0xf7699000)&#xA;      libGLU.so.1 =&gt; /usr/lib/i386-linux-gnu/libGLU.so.1 (0xf7626000)&#xA;      libGL.so.1 =&gt; /usr/lib/i386-linux-gnu/mesa/libGL.so.1 (0xf7594000)&#xA;      libX11.so.6 =&gt; /usr/lib/i386-linux-gnu/libX11.so.6 (0xf7460000)&#xA;      libXext.so.6 =&gt; /usr/lib/i386-linux-gnu/libXext.so.6 (0xf744d000)&#xA;      libXcursor.so.1 =&gt; /usr/lib/i386-linux-gnu/libXcursor.so.1 (0xf7441000)&#xA;      libXrandr.so.2 =&gt; /usr/lib/i386-linux-gnu/libXrandr.so.2 (0xf7436000)&#xA;      libm.so.6 =&gt; /lib/i386-linux-gnu/libm.so.6 (0xf73f0000)&#xA;      libgcc_s.so.1 =&gt; /lib/i386-linux-gnu/libgcc_s.so.1 (0xf73d3000)&#xA;      libc.so.6 =&gt; /lib/i386-linux-gnu/libc.so.6 (0xf7225000)&#xA;      /lib/ld-linux.so.2 (0xf76e6000)&#xA;      libstdc++.so.6 =&gt; /usr/lib/i386-linux-gnu/libstdc++.so.6 (0xf713c000)&#xA;      libexpat.so.1 =&gt; /lib/i386-linux-gnu/libexpat.so.1 (0xf7113000)&#xA;      libglapi.so.0 =&gt; /usr/lib/i386-linux-gnu/libglapi.so.0 (0xf70fa000)&#xA;      libXdamage.so.1 =&gt; /usr/lib/i386-linux-gnu/libXdamage.so.1 (0xf70f6000)&#xA;      libXfixes.so.3 =&gt; /usr/lib/i386-linux-gnu/libXfixes.so.3 (0xf70f0000)&#xA;      libX11-xcb.so.1 =&gt; /usr/lib/i386-linux-gnu/libX11-xcb.so.1 (0xf70ec000)&#xA;      libxcb-glx.so.0 =&gt; /usr/lib/i386-linux-gnu/libxcb-glx.so.0 (0xf70d4000)&#xA;      libxcb-dri2.so.0 =&gt; /usr/lib/i386-linux-gnu/libxcb-dri2.so.0 (0xf70ce000)&#xA;      libxcb-dri3.so.0 =&gt; /usr/lib/i386-linux-gnu/libxcb-dri3.so.0 (0xf70ca000)&#xA;      libxcb-present.so.0 =&gt; /usr/lib/i386-linux-gnu/libxcb-present.so.0 (0xf70c6000)&#xA;      libxcb-sync.so.1 =&gt; /usr/lib/i386-linux-gnu/libxcb-sync.so.1 (0xf70be000)&#xA;      libxcb.so.1 =&gt; /usr/lib/i386-linux-gnu/libxcb.so.1 (0xf709c000)&#xA;      libxshmfence.so.1 =&gt; /usr/lib/i386-linux-gnu/libxshmfence.so.1 (0xf7099000)&#xA;      libXxf86vm.so.1 =&gt; /usr/lib/i386-linux-gnu/libXxf86vm.so.1 (0xf7093000)&#xA;      libdrm.so.2 =&gt; /usr/lib/i386-linux-gnu/libdrm.so.2 (0xf7084000)&#xA;      libXrender.so.1 =&gt; /usr/lib/i386-linux-gnu/libXrender.so.1 (0xf7078000)&#xA;      libXau.so.6 =&gt; /usr/lib/i386-linux-gnu/libXau.so.6 (0xf7074000)&#xA;      libXdmcp.so.6 =&gt; /usr/lib/i386-linux-gnu/libXdmcp.so.6 (0xf706d000)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I installed all the libraries but it still doesn't run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;iMac (21.5-inch, Mid 2011)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor 2.5 GHz Intel Core i5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Graphics AMD Radeon HD 6750M 512 MB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Memory 4 GB 1333 MHz DDR3&lt;/p&gt;&#xA;" OwnerUserId="667" LastEditorUserId="667" LastEditDate="2015-08-13T23:45:42.697" LastActivityDate="2015-08-13T23:45:42.697" Title="I can't run any .x86 games" Tags="|games|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="896" PostTypeId="2" ParentId="782" CreationDate="2015-07-30T08:56:59.480" Score="2" Body="&lt;p&gt;This is not exact the solution you ask for, but:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can switch workspaces by scrolling on open applications in plank, if they are open in different workspaces and plank is configured to show all apps of all workspaces (default).&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-07-30T08:56:59.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="899" PostTypeId="2" ParentId="478" CreationDate="2015-07-30T12:29:19.807" Score="2" Body="&lt;p&gt;I've fix the problem: I had to change my brightness in Windows. Now all is normal. Thanks for the help.&lt;/p&gt;&#xA;" OwnerUserId="388" LastActivityDate="2015-07-30T12:29:19.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="901" PostTypeId="1" AcceptedAnswerId="1043" CreationDate="2015-07-30T15:20:05.423" Score="1" ViewCount="3889" Body="&lt;p&gt;I just installed Freya alongside Windows 8.1 on a new Acer Aspire E15 (specs below):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Celeron N2830 2.16 GHz Processor (1 MB Cache)&#xA;4 GB DDR3L SDRAM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The install went fine. When I reboot and select elementary OS in grub, it loads the elementary splash screen and then gets stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I hit the left nav button when the splash screen gets stuck, the last line says: &#xA;[  20.427979] dw_dmac INTL9C60:00: invalid resource&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does that give any clues?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help.&lt;/p&gt;&#xA;" OwnerUserId="604" LastEditorUserId="604" LastEditDate="2015-07-30T18:05:30.467" LastActivityDate="2016-01-17T17:17:09.810" Title="Stuck on splash screen at boot on Acer Aspire E15" Tags="|system-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="902" PostTypeId="2" ParentId="901" CreationDate="2015-07-30T16:03:25.573" Score="0" Body="&lt;p&gt;I'm having the same problem with an Acer Aspire E15. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to more options (not sure how its exactly called) in Grub and try to boot with an older Kernel version. This helped me for some time but then again I couldn't boot at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that I installed Freya in Legacy mode (BIOS), now and also before it isn't shutting down fully, which affects the whole system but at least I can boot normally. Maybe somebody else with more knowledge about Linux can help.&lt;/p&gt;&#xA;" OwnerUserId="673" LastEditorUserId="179" LastEditDate="2015-07-30T18:45:41.313" LastActivityDate="2015-07-30T18:45:41.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="903" PostTypeId="1" AcceptedAnswerId="904" CreationDate="2015-07-30T22:09:56.377" Score="15" ViewCount="6520" Body="&lt;p&gt;In Ubuntu, Linux Mint and Korora, all I had to do was to load the image into the CD drive and it recognized it and asked if I wanted to run it.&#xA;Everything worked seamlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS, when I load the CD image there is no prompt. I try running the &lt;code&gt;.sh&lt;/code&gt; files, nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong and how do I fix it?&lt;/p&gt;&#xA;" OwnerUserId="676" LastEditorUserId="2708" LastEditDate="2015-11-07T16:43:07.610" LastActivityDate="2021-03-22T07:09:43.770" Title="How do you install VirtualBox extensions and Guest Additions in elementary OS?" Tags="|software-installation|virtualbox|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="904" PostTypeId="2" ParentId="903" CreationDate="2015-07-30T22:31:17.133" Score="12" Body="&lt;p&gt;The VirtualBox extensions CD comes with an installation script &lt;code&gt;VBoxLinuxAdditions.run&lt;/code&gt; that requires a terminal. There is a wrapper script &lt;code&gt;autorun.sh&lt;/code&gt; that tries to open a terminal emulator and run &lt;code&gt;VBoxLinuxAdditions.run&lt;/code&gt; inside it. It tries &lt;code&gt;konsole&lt;/code&gt;, &lt;code&gt;gnome-terminal&lt;/code&gt; and &lt;code&gt;xterm&lt;/code&gt; (as of VirtualBox 4.3.28), but none of them are installed by default, so it gives up. The other distributions you tried probably have at least xterm or gnome-terminal, whereas elementary OS only has Pantheon Terminal (&lt;code&gt;pantheon-terminal&lt;/code&gt;) in the default installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you open the CD in Files, highlight &lt;code&gt;autorun.sh&lt;/code&gt; and select “Run” in the menu, the errors complaining about the inability to run a terminal are written to the log file &lt;code&gt;.xsession-errors&lt;/code&gt; in your home directory (along with a lot of other crap).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install the VirtualBox extensions, first select “Install Guest Additions CD image” in the “Devices” menu of VirtualBox. Then open Pantheton Terminal and type the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /media/gilles/VBOXADDITIONS_4.3.28_100309/VBoxLinuxAdditions.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Adjust the username and the VirtualBox version as suitable. You can save typing by using the shell's completion feature: press &lt;kbd&gt;Tab&lt;/kbd&gt; after typing the beginning of a file or directory name to automatically insert the rest, if what you typed isn't ambiguous. For example, if you're the only user on your computer, you can type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;sudo /me&lt;kbd&gt;Tab&lt;/kbd&gt;/&lt;kbd&gt;Tab&lt;/kbd&gt;/V&lt;kbd&gt;Tab&lt;/kbd&gt;/V&lt;kbd&gt;Tab&lt;/kbd&gt;L&lt;kbd&gt;Tab&lt;/kbd&gt;&lt;kbd&gt;Enter&lt;/kbd&gt;&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you no other removable media is currently inserted, you can even save the first &lt;code&gt;V&lt;/code&gt;. And conversely if you have another removable media whose label begins with &lt;code&gt;V&lt;/code&gt; you'll have to type more characters until that part is disambiguated. Similarly, if other users have currently-mounted removable media, you'll need to type enough of your username after the second &lt;code&gt;/&lt;/code&gt; to be unambiguous.&lt;/p&gt;&#xA;" OwnerUserId="190" LastActivityDate="2015-07-30T22:31:17.133" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="905" PostTypeId="1" CreationDate="2015-07-30T22:57:37.377" Score="2" ViewCount="240" Body="&lt;p&gt;I installed the catalyst driver on my acer 3810T with AMD Mobility Radeon HD 4330. After looking for the right driver, and finding one (14.1), and installing, the system is booting, but after the boot logo nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now is my question: how to remove the installed catalyst driver, to restore the system. and second: what could be the right driver for an Radeon Mobility HD 4xxx in a Acer 3810T?&lt;/p&gt;&#xA;" OwnerUserId="679" LastEditorUserId="3757" LastEditDate="2016-05-05T13:42:16.053" LastActivityDate="2016-09-18T20:13:31.667" Title="Driver install AMD Radeon mobility HD 4330 - crash, remove driver, find the right driver" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="906" PostTypeId="1" CreationDate="2015-07-30T23:03:04.867" Score="9" ViewCount="712" Body="&lt;p&gt;Currently, the implementation of current workspace only for Plank does not extend to any application that is pinned to your dock. This means that Plank will switch your workspace instead of opening a new instance of any pinned application. Is there any way I can change this behaviour so that current workspace only reflects ONLY the current workspace?&lt;/p&gt;&#xA;" OwnerUserId="677" LastActivityDate="2015-08-01T01:56:01.540" Title="How do I make pinned items on the Plank respect current workspace only?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="910" PostTypeId="1" CreationDate="2015-07-31T03:14:05.560" Score="9" ViewCount="17222" Body="&lt;p&gt;I want to tweak the top panel of the window,and I founded two kits named &quot;wingpanel-slim&quot; and &quot;super-wingpanel&quot; can do what I want to (auto hide and ...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install the from several PPA but no one success.&lt;/p&gt;&#xA;" OwnerUserId="684" LastEditorUserId="684" LastEditDate="2015-07-31T09:43:05.110" LastActivityDate="2015-07-31T09:43:05.110" Title="How to install wingpanel-slim or super-wingpanel on elementary 0.3 Freya (amd64)?" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="911" PostTypeId="1" AcceptedAnswerId="914" CreationDate="2015-07-31T03:19:25.987" Score="6" ViewCount="5132" Body="&lt;p&gt;Good night, people.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yesterday I was messing around to install elementary OS Freya and dualbooting with Windows 8.1. Before installing elementary OS I had Ubuntu 14.04 and W8.1 side by side perfectly, but wanted to try something else. At this point I had tried to install elementary OS twice. Here's what I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first time:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Created a bootable USB with Rufus, everything working OK, selected option to &quot;Erase Ubuntu and install elementary&quot;. Installed flawlessly (I want to believe), and gave me the final message asking to restart in order to enjoy elementary. Got a black screen for more than 2 hours. Finally I shut laptop down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second time:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did the same, but instead of installing over the previous installation, I decided to manually configure the partitions. Deleted all partitions exceptuating Windows and a ~350 MB partition (the only ones left by a fresh Windows 8.1 installation). From the remaining free space I assigned 100 GB to elementary OS logical partition, ext4, mount point /; and took 6 GB for swap area. The bootloader was placed at /dev/sda wich is the default. No error installation, then the final message asking to restart. I restarted and got the same black screen. Shut the computer down and started again. Selected elementary OS option form GRUB and got the black screen again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A strange thing is that GRUB only appears until you select Windows Bootloader. After booting into Windows, GRUB won't show up again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also wanted to create a recovery drive for Windows in order to completely erase Linux and try again but gave me an error message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I attach the partitions according to AOMEI and Disk Management and the Recovery Drive error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could have gone wrong or could I have done wrong?&#xA;Is there another way to create a rovery drive? AOMEI has something to create a drive to boot Windows but I'm not sure if it could help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The screenshots: &lt;a href=&quot;https://goo.gl/8HPmOK&quot; rel=&quot;nofollow&quot;&gt;https://goo.gl/8HPmOK&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance guys, I hope I was clear and detailed enough.&lt;/p&gt;&#xA;" OwnerUserId="683" LastEditorUserId="34" LastEditDate="2015-08-03T16:16:22.770" LastActivityDate="2015-08-03T16:16:31.973" Title="Black Screen after GRUB (Windows 8.1 dualboot)" Tags="|release-freya|system-installation|display|dual-boot|boot|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="912" PostTypeId="2" ParentId="910" CreationDate="2015-07-31T06:55:19.257" Score="14" Body="&lt;p&gt;Both &lt;code&gt;wingpanel-slim&lt;/code&gt; and &lt;code&gt;super-wingpanel&lt;/code&gt; were developed and maintained by a developer on Launchpad called &lt;a href=&quot;https://launchpad.net/~heathbar&quot;&gt;~heathbar&lt;/a&gt;. Unfortunately, it looks like he abandonded both projects and did not update them to work with Freya (last change to &lt;code&gt;wingpanel-slim&lt;/code&gt; was &lt;a href=&quot;https://code.launchpad.net/~heathbar/wingpanel/wingpanel-slim&quot;&gt;2013-11-19&lt;/a&gt;, last change to &lt;code&gt;super-wingpanel&lt;/code&gt; was &lt;a href=&quot;https://code.launchpad.net/super-wingpanel&quot;&gt;2014-03-04&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore, sadly, there is (currently) no way to use one of those on Freya. Maybe development will be resumed by someone else, but at this very moment, it's simply not possible.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="68" LastEditDate="2015-07-31T09:19:33.370" LastActivityDate="2015-07-31T09:19:33.370" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="913" PostTypeId="1" CreationDate="2015-07-31T08:35:22.327" Score="0" ViewCount="35" Body="&lt;p&gt;If i copy a file by dragging and dropping from a folder to the sidebar folder shortcut, I end up with the cursor being an artifact - two cursor icons with the thumbnail of the pic or video I just dragged.&#xA;(I cannot screenshot it as the cursor does not appear in a screenshot)&#xA;Does anyone else have this issue? &#xA;Is there a way I can turn off thumbnail previews whilst dragging? &#xA;&lt;em&gt;my cursor theme is unchanged - it is still elementary&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="687" LastEditorUserId="68" LastEditDate="2015-07-31T09:14:19.757" LastActivityDate="2015-07-31T09:14:19.757" Title="Drag and drop results in corrupted cursor with artifacts" Tags="|release-freya|pantheon-files|" AnswerCount="0" CommentCount="3" ClosedDate="2015-07-31T09:39:29.503" ContentLicense="CC BY-SA 3.0" />
  <row Id="914" PostTypeId="2" ParentId="911" CreationDate="2015-07-31T09:32:51.437" Score="6" Body="&lt;p&gt;Try adding &lt;code&gt;nomodeset&lt;/code&gt; to the boot. Here's how to do it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press and hold the Shift button which will show you a GRUB screen containing a list of kernels and recovery options.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZlSUO.png&quot; alt=&quot;01&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Press &lt;code&gt;e&lt;/code&gt; to edit the appropriate kernel.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/BnUQa.png&quot; alt=&quot;02&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the word &lt;code&gt;nomodeset&lt;/code&gt; before the words with &lt;code&gt;quiet splash&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press Crtl+X to boot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NOTE:&lt;/strong&gt; This will only add the &lt;code&gt;nomodeset&lt;/code&gt; temporarily.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/38780/how-do-i-set-nomodeset-after-ive-already-installed-ubuntu&quot;&gt;How do I set 'nomodeset' after I've already installed Ubuntu?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="688" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-07-31T18:42:05.237" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="915" PostTypeId="2" ParentId="903" CreationDate="2015-07-31T09:35:57.510" Score="1" Body="&lt;p&gt;Create a file with the following contents called &lt;code&gt;install-vbox.sh&lt;/code&gt; in your home directory and run it by typing* &lt;code&gt;bash ~/install-vbox.sh&lt;/code&gt;. It will download the &lt;code&gt;.iso&lt;/code&gt; file of the current VirtualBox release (5.0.0) to your Downloads directory, check that the download is valid, mount the image and run the VirtualBox installer. And automatically restart your system afterwards.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;cd ~/Downloads/&#xA;if [ ! -f ./vbox-guest.iso ]; then&#xA;  wget -O ./vbox-guest.iso &quot;http://download.virtualbox.org/virtualbox/5.0.0/VBoxGuestAdditions_5.0.0.iso&quot;&#xA;fi&#xA;echo &quot;8d9f1d600ff65d1230b9b4e386f2ad48 vbox-guest.iso&quot; &amp;gt; ./vbox-guest.iso.md5&#xA;if [ ! &quot;$(md5sum -c ~/Downloads/vbox-guest.iso.md5)&quot; ]; then &#xA;  echo &quot;Failed to verify iso file&quot;&#xA;  exit 1&#xA;fi&#xA;sudo mkdir /media/vbox-guest&#xA;sudo mount -o loop ./vbox-guest.iso /media/vbox-guest&#xA;cd /media/vbox-guest&#xA;if [ &quot;$(sudo sh ./VBoxLinuxAdditions.run)&quot; ]; then&#xA;  sleep 5&#xA;  sudo umount /media/vbox-guest&#xA;  sudo rmdir /media/vbox-guest&#xA;fi&#xA;echo &quot;You may need to restart your system for the changes to take effect, run 'shutdown -r now'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the download got corrupted and the script is stopping with &quot;Failed to verify iso file&quot; then delete &lt;code&gt;~/Downloads/vbox-guest.iso&lt;/code&gt; and run the script again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it worked you can delete &lt;code&gt;~/Downloads/vbox-guest.iso&lt;/code&gt;, &lt;code&gt;~/Downloads/vbox-guest.iso.md5&lt;/code&gt; and the script itself afterwards. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;*: Alternatively you can make the script executable first from inside Files or by running &lt;code&gt;chmod +x ~/install-vbox.sh&lt;/code&gt;. Then simply run the script from Files or by typing &lt;code&gt;~/install-vbox.sh&lt;/code&gt; in Terminal. But there is really no need as you won't be running it more than once.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-07-31T19:39:04.787" LastActivityDate="2015-07-31T19:39:04.787" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="916" PostTypeId="1" CreationDate="2015-07-31T09:42:43.787" Score="10" ViewCount="7306" Body="&lt;p&gt;I want to auto hide or change the position of the top panel，How can I do it?&#xA;Install some things or change some settings?&lt;/p&gt;&#xA;" OwnerUserId="684" LastEditorUserId="75" LastEditDate="2015-07-31T09:48:04.013" LastActivityDate="2018-09-26T05:28:02.910" Title="Is there any way to auto hide or customize the top panel? (Freya)" Tags="|wingpanel|" AnswerCount="3" CommentCount="0" ClosedDate="2019-05-01T05:20:55.970" ContentLicense="CC BY-SA 3.0" />
  <row Id="917" PostTypeId="1" CreationDate="2015-07-31T10:14:44.600" Score="11" ViewCount="536" Body="&lt;p&gt;In Luna I used &lt;code&gt;com.canonical.notify-osd gravity&lt;/code&gt; setting &lt;a href=&quot;https://askubuntu.com/questions/186419/how-can-i-change-the-location-of-the-ubuntu-notifications&quot;&gt;(like in Ubuntu)&lt;/a&gt; to change the position of notification bubble.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Freya seems to have its own notification bubbles, this setting don't exist anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change the position of notification bubble in Freya?&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-04-24T06:13:13.670" Title="How can I change the position of notification bubble?" Tags="|release-freya|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="918" PostTypeId="2" ParentId="917" CreationDate="2015-07-31T10:43:37.447" Score="11" Body="&lt;p&gt;There isn't a setting for it in the freya gala notification plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can report it as a feature request.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How can I report an issue with elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-07-31T10:43:37.447" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="919" PostTypeId="2" ParentId="916" CreationDate="2015-07-31T10:48:58.667" Score="8" Body="&lt;p&gt;Right now, no way. There is a bug report for &lt;a href=&quot;https://www.bountysource.com/issues/955498-add-optional-hide-mode&quot;&gt;wingpanel auto hide&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The position of the panel is not configurable.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-07-31T10:48:58.667" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="920" PostTypeId="1" AcceptedAnswerId="923" CreationDate="2015-07-31T11:02:10.597" Score="20" ViewCount="7131" Body="&lt;p&gt;I installed Freya three days ago on my main machine, and I faced some issues with the hardware. But I got it to work at last. But the lack of hibernation support in Freya is causing me to seriously reconsider installing another distro (which would be a pain after solving most of Freya's problems).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am used to hibernation so that I can continue from where I left off the next day. But apparently, Freya doesn't support this (does it ?). I tried installing &lt;code&gt;pm-utils&lt;/code&gt; and invoking &lt;code&gt;sudo pm-hibernate&lt;/code&gt; but that didn't work. In fact, &lt;code&gt;pm-hibernate&lt;/code&gt; seems to be hardware-dependant because I saw that it worked on other machines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All other solutions I found seems to be Ubuntu-Specific.&lt;br&gt;Any ideas ?&lt;/p&gt;&#xA;" OwnerUserId="623" LastActivityDate="2015-08-18T04:58:05.520" Title="How to hibernate Freya?" Tags="|release-freya|suspend|power|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="921" PostTypeId="2" ParentId="920" CreationDate="2015-07-31T11:49:51.560" Score="4" Body="&lt;p&gt;elementary OS Freya is designed to resume from where you left it even when you Switch Off the machine. For instance, opening Scratch will, by default, open all the files you were editing last time. As such, a design decision was made to remove it, coupled with the fact that hibernate &lt;em&gt;is&lt;/em&gt; hardware dependent, and does not work on many systems.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-07-31T11:49:51.560" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="923" PostTypeId="2" ParentId="920" CreationDate="2015-07-31T14:03:44.420" Score="16" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I tried installing pm-utils and invoking &lt;code&gt;sudo pm-hibernate&lt;/code&gt; &lt;strong&gt;but that didn't work&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Can you be more specific? As @Lewis noted, hibernate is disabled by default (even in Ubuntu). If you wish to hibernate manually with &lt;code&gt;pm-hibernate&lt;/code&gt; examine the pm-utils logs (&lt;code&gt;less /var/log/pm-suspend.log&lt;/code&gt;) for clues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Enable Hibernate&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If everything appears to be &lt;em&gt;successful&lt;/em&gt; in there you more than likely just need to add a parameter to your &lt;a href=&quot;https://help.ubuntu.com/community/BootOptions&quot; rel=&quot;nofollow noreferrer&quot;&gt;boot options&lt;/a&gt; so the kernel knows where (eg your swap partition) to attempt to resume the system from. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firstly you should make sure your swap partition is larger than your RAM. &#xA;&lt;code&gt;sudo fdisk -l&lt;/code&gt; and &lt;code&gt;free -h&lt;/code&gt; can be used to check this. Note the device ID of your swap partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, edit your grub config via &lt;code&gt;sudo scratch-text-editor /etc/default/grub&lt;/code&gt; and search for the line with &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; then add the &lt;em&gt;resume&lt;/em&gt; option to the end containing the device ID of your swap partition. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similar to this &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash resume=/dev/sda2&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure to run &lt;code&gt;sudo update-grub&lt;/code&gt; afterwards to apply the changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Add Menu Item&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add a hibernate option to the wingpanel power dropdown by creating the following file in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla&#xA;sudo scratch-text-editor /etc/polkit-1/localauthority/50-local.d/com.ubuntu.enable-hibernate.pkla&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following, save the file then reboot. &lt;a href=&quot;https://askubuntu.com/a/487282/420908&quot;&gt;Source.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Re-enable hibernate by default]&#xA;  Identity=unix-user:*&#xA;  Action=org.freedesktop.upower.hibernate&#xA;  ResultActive=yes&#xA;&#xA;[Re-enable hibernate by default for login1]&#xA;  Identity=unix-user:*&#xA;  Action=org.freedesktop.login1.hibernate&#xA;  ResultActive=yes&#xA;&#xA;[Re-enable hibernate for multiple users by default in logind]&#xA;  Identity=unix-user:*&#xA;  Action=org.freedesktop.login1.hibernate-multiple-sessions&#xA;  ResultActive=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-09T20:54:19.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="924" PostTypeId="1" AcceptedAnswerId="925" CreationDate="2015-07-31T14:55:31.847" Score="6" ViewCount="2609" Body="&lt;p&gt;Is &lt;code&gt;android-tools&lt;/code&gt; package available in elementary? If true how can I install it?&lt;/p&gt;&#xA;" OwnerUserId="472" LastEditorUserId="47" LastEditDate="2015-07-31T14:59:01.967" LastActivityDate="2015-08-01T14:40:35.273" Title="How install ADB and Fastboot on elementary os?" Tags="|software-installation|ppa|android|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="925" PostTypeId="2" ParentId="924" CreationDate="2015-07-31T14:57:43.880" Score="6" Body="&lt;p&gt;&lt;code&gt;ADB&lt;/code&gt; and &lt;code&gt;Fastboot&lt;/code&gt; are available in the &lt;code&gt;webupd8&lt;/code&gt; PPA (including backports for Ubuntu 12.04, 11.10 and 11.04 as well as for older versions of elementary OS).  You can install these tools using their PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt-get update&#xA;sudo apt-get install android-tools-adb android-tools-fastboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: &lt;strong&gt;android-tools&lt;/strong&gt; packages is included in Ubuntu 12.10 and newer.  This means that, in Freya and up, you can skip the first two commands and only do the last command.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="138" LastEditDate="2015-07-31T18:30:02.163" LastActivityDate="2015-07-31T18:30:02.163" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="926" PostTypeId="1" CreationDate="2015-07-31T15:14:39.350" Score="6" ViewCount="1006" Body="&lt;p&gt;Is there a way to set the cursor displacement dependent on mouse velocity? This is called mouse acceleration in most environments. Some call it precision-mode, which is the slow extreme of the speed spectrum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Behavior Example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Move mouse 1 inch at 1 in/s - cursor moves 200 pixels&lt;/li&gt;&#xA;&lt;li&gt;Move mouse 1 inch at 2 in/s - cursor moves 500 pixels&lt;/li&gt;&#xA;&lt;li&gt;Move mouse 1 inch at 3 in/s - cursor moves 800 pixels&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="425" LastActivityDate="2015-08-01T06:24:14.307" Title="Can I set Mouse Acceleration / Precision mode?" Tags="|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="930" PostTypeId="1" AcceptedAnswerId="931" CreationDate="2015-07-31T21:53:22.470" Score="3" ViewCount="154" Body="&lt;p&gt;I have developed an application for elementary which is a Network Utility. The details of the Nutty application can be found here at launchpad:&#xA;&lt;a href=&quot;https://launchpad.net/nutty&quot; rel=&quot;nofollow&quot;&gt;&lt;a href=&quot;https://launchpad.net/nutty&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/nutty&lt;/a&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In response to a bug report, I'm trying to build an About page for the app. I'm looking for some sample code for the template used by the About dialog of elementary OS apps like Files, Scratch, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rather than create my own layout, it will be good if I can keep the About dialog in the same format as other elementary OS apps. Can someone point me at some relevant code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Sid&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="3757" LastEditDate="2016-04-24T06:09:19.227" LastActivityDate="2016-04-24T06:09:19.227" Title="Template for a &quot;About&quot; dialog for an Elementary OS application" Tags="|applications|programming|vala|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="931" PostTypeId="2" ParentId="930" CreationDate="2015-07-31T22:24:21.993" Score="4" Body="&lt;p&gt;I believe that you are looking for Granite.Widgets.AboutDialog.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find everything about it here : &lt;a href=&quot;http://valadoc.org/#!api=granite/Granite.Widgets.AboutDialog&quot; rel=&quot;nofollow&quot;&gt;Valadoc Granite.Widgets.AboutDialog&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't recognize a widget in a particular application, try using the new GTK+ Inspector, its really handy in situations like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope I helped :)&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="675" LastEditDate="2015-07-31T22:31:02.087" LastActivityDate="2015-07-31T22:31:02.087" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="932" PostTypeId="2" ParentId="911" CreationDate="2015-07-31T22:26:51.447" Score="0" Body="&lt;p&gt;Windows 8.1 is installed in EFI mode (I am convinst), that is, you have to start the stick in the EFI mode, and then install the EFI mode. Just look at &quot;wiki.ubuntuusers.de/EFI_Installieren&quot;.&lt;/p&gt;&#xA;" OwnerUserId="699" LastActivityDate="2015-07-31T22:26:51.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="933" PostTypeId="2" ParentId="926" CreationDate="2015-07-31T23:58:18.220" Score="3" Body="&lt;p&gt;I believe there is some form of acceleration by default.  At least on my system that seems to be the case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use the &lt;code&gt;xset&lt;/code&gt; command to experiment with this behaviour. For example, &lt;code&gt;xset m 50 2&lt;/code&gt; sets the &lt;em&gt;'acceleration'&lt;/em&gt; to &lt;strong&gt;50&lt;/strong&gt; and the &lt;em&gt;'threshold'&lt;/em&gt; to &lt;strong&gt;2&lt;/strong&gt;. The cursor will move &lt;strong&gt;50x&lt;/strong&gt; times as fast when it travels more than &lt;strong&gt;2&lt;/strong&gt; pixels in a short time. For more information see the manual &lt;a href=&quot;http://www.x.org/archive/X11R6.8.1/doc/xset.1.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="229" LastEditorUserId="137" LastEditDate="2015-08-01T06:24:14.307" LastActivityDate="2015-08-01T06:24:14.307" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="934" PostTypeId="2" ParentId="894" CreationDate="2015-08-01T00:16:53.647" Score="3" Body="&lt;p&gt;You need to install the relevant libraries in 32-bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, &quot;sudo apt-get install libglu1-mesa:i386&quot; should get rid of the &quot;libGLU.so.1 =&gt; not found&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With some effort I'm sure you can find the packages for the other libraries.&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2015-08-01T00:16:53.647" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="935" PostTypeId="2" ParentId="586" CreationDate="2015-08-01T01:40:31.927" Score="-1" Body="&lt;p&gt;Alternately you can type the login password and click enter when you see the black screen.&lt;/p&gt;&#xA;" OwnerUserId="666" LastActivityDate="2015-08-01T01:40:31.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="936" PostTypeId="2" ParentId="911" CreationDate="2015-08-01T01:44:40.567" Score="-2" Body="&lt;p&gt;Try to enter in rescue mode and run the &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;Boot-Repair&lt;/a&gt; tool.&lt;/p&gt;&#xA;" OwnerUserId="666" LastActivityDate="2015-08-01T01:44:40.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="937" PostTypeId="2" ParentId="906" CreationDate="2015-08-01T01:56:01.540" Score="3" Body="&lt;p&gt;You can install Elementary Tweaks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And in the left menu choose Plank and switch this options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Current Workspace Only&lt;/li&gt;&#xA;&lt;li&gt;Lock Items&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="666" LastActivityDate="2015-08-01T01:56:01.540" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="938" PostTypeId="1" CreationDate="2015-08-01T03:14:53.617" Score="1" ViewCount="697" Body="&lt;p&gt;I installed an Windows 7 Virtual Machine and everything is working fine, but to be able to identify USB devices inside my guest system it needs a function called &quot;Groups&quot; described &lt;a href=&quot;https://askubuntu.com/questions/25596/how-to-set-up-usb-for-virtualbox&quot;&gt;here&lt;/a&gt; that can be activated in Ubuntu. I tried to install in Freya but it didnt work at all (the menu option didnt apear and I'm not able to set all needed configuration). I wasnt able to find an specific solution that works in Elementary so here I am asking to you if you know any solution.&lt;/p&gt;&#xA;" OwnerUserId="700" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-01-03T01:38:48.473" Title="How can I enable USB in Virtual Box inside Freya?" Tags="|release-freya|virtualization|virtualbox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="939" PostTypeId="2" ParentId="839" CreationDate="2015-08-01T05:51:39.850" Score="1" Body="&lt;p&gt;Problem got solved. Tomahawk player bottom part now appears normally within screen and also with the maximize button.&#xA;The problem got fixed with the recent package update, so i think it might have been a tomahawk issue.&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-08-01T05:51:39.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="940" PostTypeId="1" CreationDate="2015-08-01T05:54:18.700" Score="2" ViewCount="4426" Body="&lt;p&gt;My laptop dual boots Windows 10 and elementary freya. Using connectify and even cmd, I can create a WiFi hotspot in Windows. However, access point mode is not supported in freya. I tried almost every method available here without any success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My wifi card details are (from &lt;code&gt;lspci -nn&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;08:00.0 Network controller [0280]: &#xA;Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there any way to create the hotspot in order to share internet with my Android phone?&lt;/p&gt;&#xA;" OwnerUserId="701" LastEditorUserId="45" LastEditDate="2015-08-04T21:47:13.227" LastActivityDate="2015-08-04T21:47:13.227" Title="How can I create a wireless hotspot?" Tags="|release-freya|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="941" PostTypeId="2" ParentId="938" CreationDate="2015-08-01T06:04:43.357" Score="3" Body="&lt;p&gt;Steps to enable USB support for vbox:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install the appropriate vbox extension pack&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and execute this command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo usermod -a -G vboxusers $USER&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to settings &gt; usb&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Tick USB controller and USB 2.0 controller&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add an USB device filter.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="390" LastEditorUserId="129" LastEditDate="2015-08-01T08:14:37.997" LastActivityDate="2015-08-01T08:14:37.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="942" PostTypeId="2" ParentId="821" CreationDate="2015-08-01T06:43:40.760" Score="6" Body="&lt;p&gt;Answered already in the previous answer's comments.&#xA;Restating here for the upcoming users, so it would be easy to follow.&lt;/p&gt;&#xA;&lt;h3&gt;Solution:&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hanipouspilot/focaltech-dkms&#xA;sudo apt-get update&#xA;sudo apt-get install focaltech-dkms&#xA;sudo modprobe -r psmouse &#xA;sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Note: This works on all debian based distros (Ubuntu, elementary OS and so on)&lt;/h3&gt;&#xA;" OwnerUserId="102" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-03T16:16:28.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="943" PostTypeId="1" AcceptedAnswerId="945" CreationDate="2015-08-01T07:36:04.560" Score="0" ViewCount="855" Body="&lt;p&gt;Some months I use gala from elementary OS stable repositories on Debian Jessie + xfce. Working perfect. Recently I installed new wingpanel from ppa:elementary-os/staging. It installs without problems, but system tray isn't displayed. Only this indicators on panel: calendar, network, notifications and session indicator. Panel crashing after installation keyboard indicator. I can't understand why the system tray isn't displayed and why panel crashing after installation keyboard indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only this in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_INFO 10:55:56.661879] Application.vala:155: System Panel version: 2.0&#xA;[_LOG_LEVEL_INFO 10:55:56.661954] Application.vala:157: Kernel version: 3.16.0-4-amd64&#xA;[_LOG_LEVEL_WARN 10:55:56.668387] IndicatorFactory.vala:49: Unable to read indicators: There is no such file or directory&#xA;[_LOG_LEVEL_WARN 10:55:56.689326] [Gtk] Failed to parse /home/evil/.config/gtk-3.0/settings.ini: The file of keys doesn't begin with group&#xA;[_LOG_LEVEL_FATAL 10:55:56.731891] [Gtk] gtk_widget_get_visible: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;[_LOG_LEVEL_FATAL 10:55:56.731930] System Panel will not function properly.&#xA;[_LOG_LEVEL_FATAL 10:55:56.742305] file /build/wingpanel-indicator-session-II9w3t/wingpanel-indicator-session-0.1+r30+pkg5~daily~ubuntu0.3.1/src/Indicator.vala: line 138: unexpected error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files (g-dbus-error-quark, 2)&#xA;[_LOG_LEVEL_FATAL 10:55:56.742347] System Panel will not function properly.&#xA;[_LOG_LEVEL_FATAL 10:55:56.742386] [Gtk] gtk_container_add: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;[_LOG_LEVEL_FATAL 10:55:56.742410] System Panel will not function properly.&#xA;[_LOG_LEVEL_FATAL 10:55:56.742889] file /build/wingpanel-indicator-session-II9w3t/wingpanel-indicator-session-0.1+r30+pkg5~daily~ubuntu0.3.1/src/Indicator.vala: line 118: unexpected error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files (g-dbus-error-quark, 2)&#xA;[_LOG_LEVEL_FATAL 10:55:56.742929] System Panel will not function properly.&#xA;[_LOG_LEVEL_FATAL 10:55:56.775501] DeviceManager.vala:93: Updating UPower properties failed: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such property OnLowBattery&#xA;[_LOG_LEVEL_FATAL 10:55:56.775540] System Panel will not function properly.&#xA;[_LOG_LEVEL_FATAL 10:55:56.775954] [Gtk] gtk_widget_get_visible: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;[_LOG_LEVEL_FATAL 10:55:56.775989] System Panel will not function properly.&#xA;[_LOG_LEVEL_WARN 10:55:56.954923] [Gtk] Invalid icon size 24 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="702" LastEditorUserId="34" LastEditDate="2015-09-03T22:23:00.563" LastActivityDate="2015-09-03T22:23:00.563" Title="Wingpanel on Debian Jessie" Tags="|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="944" PostTypeId="1" CreationDate="2015-08-01T08:28:41.097" Score="2" ViewCount="219" Body="&lt;p&gt;Everytime I take a screenshot the result is only the background image.&#xA;Doesn't matter I do it via print key or open the tool itself. It does the same for opened windows when hitting &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;Prt Sc&lt;/kbd&gt; no matter if I'm fullscreen with that window or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;sudo lshw -c video&lt;/strong&gt; gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-display               &#xA;       description: VGA compatible controller&#xA;       product: Hawaii PRO [Radeon R9 290]&#xA;       vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;       configuration: driver=fglrx_pci latency=0&#xA;       resources: irq:49 memory:e0000000-efffffff memory:f0000000-f07fffff ioport:e000(size=256) memory:f7e00000-f7e3ffff memory:f7e40000-f7e5ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and &lt;strong&gt;fglrxinfo&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;display: :0  screen: 0&#xA;OpenGL vendor string: Advanced Micro Devices, Inc.&#xA;OpenGL renderer string: AMD Radeon R9 200 Series &#xA;OpenGL version string: 4.4.13374 Compatibility Profile Context 15.20.1013&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="413" LastEditorUserId="3757" LastEditDate="2016-04-25T02:13:58.393" LastActivityDate="2016-04-25T02:13:58.393" Title="Screenshots on Freya only capture background wallpaper" Tags="|screenshot|" AnswerCount="0" CommentCount="5" ClosedDate="2015-08-17T16:34:06.617" ContentLicense="CC BY-SA 3.0" />
  <row Id="945" PostTypeId="2" ParentId="943" CreationDate="2015-08-01T08:55:07.727" Score="3" Body="&lt;p&gt;First of all, the new wingpanel and it's indicators are work in progress and are not ready for productive use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard indicator is listening on the &lt;code&gt;org.gnome.desktop.input-sources&lt;/code&gt; gsettings entry. Maybe you don't have it. It also depends right now on the switchboard keyboard plug for the layouts file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Btw. you also have installed wingpanel-indicator-ayatana which only works on ubuntu. Also you are missing some dbus interfaces which the indicators depends on (probably you have the wrong versions since you are on debian).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alucryd managed to make it work on arch. Maybe you can look up something there.&#xA;&lt;a href=&quot;https://github.com/alucryd/aur-alucryd/tree/master/pantheon&quot; rel=&quot;nofollow&quot;&gt;https://github.com/alucryd/aur-alucryd/tree/master/pantheon&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-08-01T08:55:07.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="946" PostTypeId="1" CreationDate="2015-08-01T09:53:51.133" Score="5" ViewCount="4015" Body="&lt;p&gt;My PC and laptop can't read the USB in BIOS or OS if it was created by &lt;code&gt;dd&lt;/code&gt; command with elementary OS iso, but it works fine with other distros iso, no matter how many times that I download the iso file, it just won't work, the elementary OS iso only works with unetbootin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;MD5 check:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aJNcR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aJNcR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;laichiaheng@PC:~$ md5sum ~/下載/elementaryos-freya-amd64.20150411.iso &amp;gt;file.md5&#xA;laichiaheng@PC:~$ md5sum -c file.md5 &#xA;/home/laichiaheng/下載/elementaryos-freya-amd64.20150411.iso: 正確&#xA;laichiaheng@PC:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;正確＝correct&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MD5 is correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;dd command:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/k0OHI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k0OHI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;laichiaheng@PC:~$ sudo dd if=~/下載/elementaryos-freya-amd64.20150411.iso of=/dev/sdc&#xA;[sudo] password for laichiaheng: &#xA;輸入 1744896+0 個紀錄&#xA;輸出 1744896+0 個紀錄&#xA;複製了 893386752 個位元組 (893 MB), 253.208 s, 3.5 MB/s&#xA;laichiaheng@PC:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;輸入＝input, 輸出＝output, 複製了＝has copied&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;check:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;And I removed the usb disk, then pluged it in again, I couldn't see my 8G USB unless I mounted it as root, and I couldn't see it in the BIOS menu either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q7ENo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q7ENo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  (elementary OS fail!!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mR2RP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mR2RP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;laichiaheng@PC:~$ sudo dd if=~/下載/ubuntu-14.04.2-desktop-amd64.iso of=/dev/sdc&#xA;輸入 2039808+0 個紀錄&#xA;輸出 2039808+0 個紀錄&#xA;複製了 1044381696 個位元組 (1.0 GB), 297.45 s, 3.5 MB/s&#xA;laichiaheng@PC:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It appeared!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2IhbG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2IhbG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  (Ubuntu success!!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please fix this!!&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="3757" LastEditDate="2016-05-04T10:23:25.387" LastActivityDate="2016-05-04T10:23:25.387" Title="Why doesn't dd work to create live USB" Tags="|release-freya|iso|" AnswerCount="2" CommentCount="16" ContentLicense="CC BY-SA 3.0" />
  <row Id="947" PostTypeId="5" CreationDate="2015-08-01T10:26:00.793" Score="0" Body="&lt;p&gt;ISO-image is an archive file (also known as a disc image) of an optical disc, composed of the data contents of every written sector of an optical disc.&lt;/p&gt;&#xA;" OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:26.027" LastActivityDate="2015-08-01T11:02:26.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="948" PostTypeId="4" CreationDate="2015-08-01T10:26:00.793" Score="0" Body="Questions about how to use/mount/burn/create ISO images." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:11.220" LastActivityDate="2015-08-01T11:02:11.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="949" PostTypeId="5" CreationDate="2015-08-01T10:30:23.360" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:30:23.360" LastActivityDate="2015-08-01T10:30:23.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="950" PostTypeId="4" CreationDate="2015-08-01T10:30:23.360" Score="0" Body="For questions regarding the installation of two or more operating systems on a single computer." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:17.017" LastActivityDate="2015-08-01T11:02:17.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="951" PostTypeId="5" CreationDate="2015-08-01T10:31:58.660" Score="0" Body="&lt;p&gt;Alternatively referred to as &lt;strong&gt;boot up, booting&lt;/strong&gt; is the process of powering on a computer and getting into the operating system. During the boot process, the computer will perform a self-diagnostic, also known as a &lt;strong&gt;POST&lt;/strong&gt; and load necessary drivers and programs that help the computer and devices communicate.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-15T01:29:08.963" LastActivityDate="2015-10-15T01:29:08.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="952" PostTypeId="4" CreationDate="2015-08-01T10:31:58.660" Score="0" Body="Questions about the bootup process in elementary OS.  Use this tag if you have trouble booting elementary OS or you have questions about the bootup process." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:34.767" LastActivityDate="2015-08-01T11:02:34.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="953" PostTypeId="5" CreationDate="2015-08-01T10:36:02.643" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:36:02.643" LastActivityDate="2015-08-01T10:36:02.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="954" PostTypeId="4" CreationDate="2015-08-01T10:36:02.643" Score="0" Body="The pointing device (generally referred to as the mouse). When referring to laptops, please specify if it is the trackpad and not an external mouse by using the trackpad tag." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:05.030" LastActivityDate="2015-08-01T11:02:05.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="955" PostTypeId="5" CreationDate="2015-08-01T10:40:23.767" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:40:23.767" LastActivityDate="2015-08-01T10:40:23.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="956" PostTypeId="4" CreationDate="2015-08-01T10:40:23.767" Score="0" Body="Desktop is a set of unifying concepts used by graphical user interfaces to help users more easily interact with the computer." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:14.317" LastActivityDate="2015-08-01T11:02:14.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="957" PostTypeId="5" CreationDate="2015-08-01T10:45:29.900" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:45:29.900" LastActivityDate="2015-08-01T10:45:29.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="958" PostTypeId="4" CreationDate="2015-08-01T10:45:29.900" Score="0" Body="Tools for installing and maintaining software packages." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:01:57.987" LastActivityDate="2015-08-01T11:01:57.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="959" PostTypeId="5" CreationDate="2015-08-01T10:52:51.600" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:52:51.600" LastActivityDate="2015-08-01T10:52:51.600" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="960" PostTypeId="4" CreationDate="2015-08-01T10:52:51.600" Score="0" Body="Questions about mounting file systems. (Examples include a CD, a DVD, an external hard drive and a USB thumb drive.)" OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:20.057" LastActivityDate="2015-08-01T11:02:20.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="961" PostTypeId="5" CreationDate="2015-08-01T10:55:10.033" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T10:55:10.033" LastActivityDate="2015-08-01T10:55:10.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="962" PostTypeId="4" CreationDate="2015-08-01T10:55:10.033" Score="0" Body="Questions about sound issues with elementary OS spanning from sound cards, microphones and speakers/headset to the transfer of audio signals via audio port, bluetooth and HDMI." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T11:02:30.567" LastActivityDate="2015-08-01T11:02:30.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="963" PostTypeId="1" CreationDate="2015-08-01T11:10:00.670" Score="2" ViewCount="131" Body="&lt;p&gt;I have a short question and hope someone out there can help me with that kind of problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've reinstalled a fresh Freya on my Laptop, everything runs without problems (as it did before) and smooth so far, there's only one thing that's IMO a &lt;em&gt;huge&lt;/em&gt; no-go (when writing a text / while coding) :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I press &lt;kbd&gt;ctrl&lt;/kbd&gt; or &lt;kbd&gt;shift&lt;/kbd&gt; and while holding one of this keys pressed and try to make a space it doesn't do anything, this wasn't in my previous freya installation. Does anybody know how I can fix this / get it back as it was before? (That it'll insert a space even while holding &lt;kbd&gt;ctrl&lt;/kbd&gt; or &lt;kbd&gt;shift&lt;/kbd&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would be awesome if someone out there can help me, had some thoughts that it's maybe something to configure with dconf if it isn't in the switchboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="704" LastEditorUserId="179" LastEditDate="2015-10-02T12:53:09.747" LastActivityDate="2015-10-02T12:53:09.747" Title="Keyboard doesn't insert space when 'ctrl' or 'shift' pressed" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="964" PostTypeId="5" CreationDate="2015-08-01T11:15:54.340" Score="0" Body="&lt;p&gt;Typefaces, often called fonts, are sets of stylized character glyphs, for changing the apperance of a text.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:39.803" LastActivityDate="2016-10-02T14:33:39.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="965" PostTypeId="4" CreationDate="2015-08-01T11:15:54.340" Score="0" Body="Fonts refers to the computer's typefaces, used to change the appearance or style of text" OwnerUserId="129" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:22.483" LastActivityDate="2016-10-02T14:33:22.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="966" PostTypeId="5" CreationDate="2015-08-01T11:17:12.407" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T11:17:12.407" LastActivityDate="2015-08-01T11:17:12.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="967" PostTypeId="4" CreationDate="2015-08-01T11:17:12.407" Score="0" Body="For questions regarding the function of the entire operating system and issues that affect users system-wide." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T12:24:40.303" LastActivityDate="2015-08-01T12:24:40.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="968" PostTypeId="5" CreationDate="2015-08-01T11:18:35.470" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T11:18:35.470" LastActivityDate="2015-08-01T11:18:35.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="969" PostTypeId="4" CreationDate="2015-08-01T11:18:35.470" Score="0" Body="The lightweight and stylish app launcher." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T12:25:01.093" LastActivityDate="2015-08-01T12:25:01.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="970" PostTypeId="5" CreationDate="2015-08-01T11:23:58.057" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T11:23:58.057" LastActivityDate="2015-08-01T11:23:58.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="971" PostTypeId="4" CreationDate="2015-08-01T11:23:58.057" Score="0" Body="A window manager is the software component responsible for the tracking and placement of windows within a graphical interface." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-01T12:24:44.267" LastActivityDate="2015-08-01T12:24:44.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="972" PostTypeId="5" CreationDate="2015-08-01T11:26:29.703" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-01T11:26:29.703" LastActivityDate="2015-08-01T11:26:29.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="973" PostTypeId="4" CreationDate="2015-08-01T11:26:29.703" Score="0" Body="Questions about the graphics driver — system software that controls a computer's video adapter (aka graphics card) or GPU." OwnerUserId="129" LastEditorUserId="84" LastEditDate="2015-08-08T17:43:20.887" LastActivityDate="2015-08-08T17:43:20.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="974" PostTypeId="2" ParentId="940" CreationDate="2015-08-01T12:33:11.477" Score="2" Body="&lt;p&gt;&lt;strong&gt;Wireless Drivers&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whichever method you choose to create your hotspot, your wireless card will need to support either &lt;em&gt;Ad-Hoc&lt;/em&gt; or &lt;em&gt;AP&lt;/em&gt; mode. Examine the output of &lt;code&gt;iw list&lt;/code&gt; and look for the &lt;em&gt;Supported interface modes:&lt;/em&gt; section. If &lt;em&gt;Ad-Hoc&lt;/em&gt; or &lt;em&gt;AP&lt;/em&gt; are not listed you may have to try installing another driver as there are several for Broadcom devices. You can view the name and version of the current driver in use with the &lt;code&gt;lshw -c network&lt;/code&gt; command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Enable Hotspot (Ad-Hoc)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &lt;em&gt;Network&lt;/em&gt; from &lt;em&gt;System Settings&lt;/em&gt;. Select &lt;em&gt;Wireless&lt;/em&gt; from the left hand panel. A &lt;em&gt;Use as Hotspot...&lt;/em&gt; button will appear at the bottom of the dialog. Select it and you should now have a Wi-Fi hotspot utilising Ad-Hoc mode with your computers hostname as the SSID. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: By default this method will only use WEP encryption. You can modify this behavior by editing the network profile by hand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter &#xA;&lt;code&gt;sudo scratch-text-editor /etc/NetworkManager/system-connections/Hotspot&lt;/code&gt; in a terminal. Replace (or comment out each line with a #) the &lt;em&gt;[802-11-wireless-security]&lt;/em&gt; section with the following.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[802-11-wireless-security]&#xA;key-mgmt=wpa-psk&#xA;auth-alg=open&#xA;psk=&amp;lt;your desired WPA keye&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Enable Hotspot (AP)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an alternative method detailed &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2014/09/3-ways-create-wifi-hotspot-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; allowing you to set up a Hotspot utilising the AP mode of your wireless device. One downside to using this method is that you may stop seeing other networks, presumably because it doesn't 'scan' once set in AP mode.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-08-02T09:23:34.323" LastActivityDate="2015-08-02T09:23:34.323" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="976" PostTypeId="1" AcceptedAnswerId="980" CreationDate="2015-08-01T14:22:39.387" Score="6" ViewCount="14743" Body="&lt;p&gt;I'd like to use Gradle, but from the &lt;a href=&quot;https://docs.gradle.org/current/userguide/installation.html&quot; rel=&quot;noreferrer&quot;&gt;User Guide&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;For running Gradle, add &lt;em&gt;&lt;code&gt;GRADLE_HOME&lt;/code&gt;&lt;/em&gt;&lt;code&gt;/bin&lt;/code&gt; to your &lt;code&gt;PATH&lt;/code&gt; environment variable. Usually, this is sufficient to run Gradle.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;What is the &quot;best&quot; place to add this? I'm the only user of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="669" LastActivityDate="2015-08-02T10:40:59.300" Title="Add 'GRADLE_HOME/bin' to PATH" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="977" PostTypeId="2" ParentId="924" CreationDate="2015-08-01T14:40:35.273" Score="5" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install android-tools-adb android-tools-fastboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command will install ADB and Fastboot for you. elementary OS Freya is built on top of Ubuntu 14.04 so it has the very same package repositories as Ubuntu 14.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current answer asks you to add a custom PPA which shouldn't be encouraged if software is available in the official repositories.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-08-01T14:40:35.273" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="979" PostTypeId="2" ParentId="976" CreationDate="2015-08-01T15:58:33.450" Score="0" Body="&lt;p&gt;You can put it in /etc/environment (it will work for every user) or in your .bashrc file (variable would be valid only through bash) located in your home directory.&lt;/p&gt;&#xA;" OwnerUserId="675" LastActivityDate="2015-08-01T15:58:33.450" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="980" PostTypeId="2" ParentId="976" CreationDate="2015-08-01T19:04:08.833" Score="9" Body="&lt;p&gt;A path set in &lt;code&gt;.bashrc&lt;/code&gt; will only be set in a bash interactive non-login shell, it won't be set in applications launched directly from the GUI nor (if you log in remotely) when you log in over SSH. If you put your path in &lt;code&gt;.profile&lt;/code&gt; or &lt;code&gt;/etc/profile.d&lt;/code&gt; it will be available to your complete desktop session.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, change &lt;code&gt;/path/to/your/gradle&lt;/code&gt; in my examples with your actual gradle path.&lt;br&gt;&#xA;Both solutions will take effect after your next login.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Systemwide setting&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;There are many ways to set a systemwide variable, but in my opinion the most clean &amp;amp; elegant approach is a separate script in &lt;code&gt;/etc/profile.d&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, create  a new file, make it executable and open it with an editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /etc/profile.d/gradle.sh&#xA;sudo chmod +x /etc/profile.d/gradle.sh&#xA;sudo -i scratch-text-editor /etc/profile.d/gradle.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then add the following lines into it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export GRADLE_HOME=/path/to/your/gradle&#xA;export PATH=&quot;$PATH:$GRADLE_HOME/bin&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;User specific setting&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;open your local &lt;code&gt;.profile&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.profile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add the following lines at the end of this script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export GRADLE_HOME=/path/to/your/gradle&#xA;export PATH=&quot;$PATH:$GRADLE_HOME/bin&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastEditorUserId="190" LastEditDate="2015-08-02T10:40:59.300" LastActivityDate="2015-08-02T10:40:59.300" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="981" PostTypeId="1" AcceptedAnswerId="983" CreationDate="2015-08-01T19:18:08.523" Score="42" ViewCount="16440" Body="&lt;p&gt;Is there a list or is it possible to elaborate a full list of pantheon-terminal's shortcuts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;  + &lt;kbd&gt; L&lt;/kbd&gt; Clears the screen&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;  + &lt;kbd&gt;D&lt;/kbd&gt; Closes active tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;  +&lt;kbd&gt; Shift &lt;/kbd&gt;+ &lt;kbd&gt;T&lt;/kbd&gt; Opens new tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;  + &lt;kbd&gt;1&lt;/kbd&gt;...&lt;kbd&gt;9&lt;/kbd&gt; Jumps to first-ninth tab&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19" LastEditorUserId="16827" LastEditDate="2019-10-25T01:17:18.997" LastActivityDate="2019-11-21T14:54:35.807" Title="List of keyboard shortcuts for Terminal" Tags="|keyboard-shortcuts|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="982" PostTypeId="2" ParentId="870" CreationDate="2015-08-01T19:47:44.873" Score="2" Body="&lt;p&gt;I believe your question is more of a &amp;quot;Does this indication apply to my system, elementary OS?&amp;quot; with a follow up of &amp;quot;Is it really necessary?&amp;quot;, with that in mind:&lt;/p&gt;&#xA;&lt;h1&gt;Does this indication apply to my system, elementary OS?&lt;/h1&gt;&#xA;&lt;p&gt;Private tunnel uses openvpn for their connection, elementary OS does not ship a modified version of openvpn. &lt;code&gt;apt-cache policy&lt;/code&gt; allows you to see the version and source of a package.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy network-manager-openvpn openvpn&#xA;network-manager-openvpn:&#xA;  Installed: (none)&#xA;  Candidate: 0.9.8.2-1ubuntu4&#xA;  Version table:&#xA;     0.9.8.2-1ubuntu4 0&#xA;        500 http://pt.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;openvpn:&#xA;  Installed: 2.3.2-7ubuntu3.1&#xA;  Candidate: 2.3.2-7ubuntu3.1&#xA;  Version table:&#xA; *** 2.3.2-7ubuntu3.1 0&#xA;        500 http://pt.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages&#xA;        500 http://security.ubuntu.com/ubuntu/ trusty-security/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     2.3.2-7ubuntu3 0&#xA;        500 http://pt.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Based on that, any recommendations for openvpn in Ubuntu 14.04 apply to elementaryOS.&lt;/p&gt;&#xA;&lt;h1&gt;Is it really necessary?&lt;/h1&gt;&#xA;&lt;p&gt;The website does not specify a concrete version of Ubuntu, although it should not cripple your installation of openvpn, you should ask them (support@privatetunnel.com) if these indications still apply to &lt;code&gt;Ubuntu 14.04&lt;/code&gt; (base of elementary OS) before following their directions.&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-01T20:25:34.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="983" PostTypeId="2" ParentId="981" CreationDate="2015-08-01T20:56:33.167" Score="63" Body="&lt;p&gt;&lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; Open terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Shortcuts Pantheon Terminal&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; Closes active tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;W&lt;/kbd&gt; Closes tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; Opens new tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;1&lt;/kbd&gt;...&lt;kbd&gt;9&lt;/kbd&gt; Jumps to first-ninth tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;+&lt;/kbd&gt; Increase font size&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;-&lt;/kbd&gt; Decrease font size&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;C&lt;/kbd&gt; Copy selected text&#xA;(if nothing is selected, it will terminate the current process) &lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;V&lt;/kbd&gt; Paste clipboard text&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;N&lt;/kbd&gt; Open new window&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; Open search field&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; Select all text&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;&amp;larr;&lt;/kbd&gt; Previous Tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;&amp;rarr;&lt;/kbd&gt; Next Tab&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Shortcuts Bash&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; Clears the screen&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;C&lt;/kbd&gt; Terminate the command&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;R&lt;/kbd&gt; Search command history backwards&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; go to the start of the command line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;E&lt;/kbd&gt; go to the end of the command line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;K&lt;/kbd&gt; cut from cursor to the end of the command line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;U&lt;/kbd&gt; cut from cursor to the start of the command line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;W&lt;/kbd&gt; cut from cursor to start of word &lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;B&lt;/kbd&gt; move backward one word (or go to start of word the cursor is currently on)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; move forward one word (or go to end of word the cursor is currently on)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; delete to end of word starting at cursor&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;C&lt;/kbd&gt; capitalize to end of word starting at cursor&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;U&lt;/kbd&gt; make uppercase from cursor to end of word&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; make lowercase from cursor to end of word&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; swap current word with previous&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;!!&lt;/code&gt; run last command&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;!word&lt;/code&gt; – run the most recent command that starts with ‘word’&lt;/li&gt;&#xA;&lt;li&gt;... and various other shortcuts&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2019-11-21T14:54:35.807" LastActivityDate="2019-11-21T14:54:35.807" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="984" PostTypeId="1" CreationDate="2015-08-02T00:47:58.013" Score="2" ViewCount="320" Body="&lt;p&gt;I booted up my computer and I went right to Windows. Normally, it boots asking me if I want to boot to elementary OS or Windows. I tried booting multiple times and manually tried to go to elementary OS but only Windows works. I looked at the drive partition but it shows that nothing is there. Why did this happen?&lt;/p&gt;&#xA;" OwnerUserId="709" LastEditorUserId="3757" LastEditDate="2016-05-06T05:22:07.133" LastActivityDate="2018-12-31T09:23:34.707" Title="elementary OS disappeared. What should I do to prevent this again?" Tags="|release-freya|dual-boot|microsoft-windows|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="985" PostTypeId="1" CreationDate="2015-08-02T04:10:29.120" Score="2" ViewCount="125" Body="&lt;p&gt;I noticed that the mouse was slightly offset when trying to click gui components. I decided to test it and it turns out that the pointer is actually offset by 3 pixels up and 1 pixel left. I tested this by writing a small java swing application that just showed x and y positions of various different mouse events. It's not the mouse, I've tried other mice. Anyone have an idea why this is happening?&lt;/p&gt;&#xA;" OwnerUserId="612" LastActivityDate="2015-08-02T04:10:29.120" Title="Mouse slightly offset by 3 pixels up and 1 pixel left (pointer image)" Tags="|mouse|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-17T16:32:59.357" ContentLicense="CC BY-SA 3.0" />
  <row Id="986" PostTypeId="5" CreationDate="2015-08-02T04:39:21.363" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-02T04:39:21.363" LastActivityDate="2015-08-02T04:39:21.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="987" PostTypeId="4" CreationDate="2015-08-02T04:39:21.363" Score="0" Body="Questions about the display: brightness, resolution, etc." OwnerUserId="129" LastEditorUserId="190" LastEditDate="2015-08-15T21:40:04.523" LastActivityDate="2015-08-15T21:40:04.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="988" PostTypeId="5" CreationDate="2015-08-02T04:42:35.050" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-02T04:42:35.050" LastActivityDate="2015-08-02T04:42:35.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="989" PostTypeId="4" CreationDate="2015-08-02T04:42:35.050" Score="0" Body="Security covers a wide-ranging set of topics including Users, Permissions, Authentication, Authorization, Upgrades, Firewalling, Hardening, etc." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-02T10:40:50.237" LastActivityDate="2015-08-02T10:40:50.237" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="990" PostTypeId="2" ParentId="984" CreationDate="2015-08-02T05:32:02.210" Score="0" Body="&lt;p&gt;Windows can't see a ext4 partition that's why it doesn't appear in windows. Boot a live cd and install grub via &#xA;sudo apt-get install grub. &#xA;After that you will see your os selection back again. &lt;/p&gt;&#xA;" OwnerUserId="523" LastActivityDate="2015-08-02T05:32:02.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="991" PostTypeId="1" AcceptedAnswerId="992" CreationDate="2015-08-02T06:22:02.980" Score="3" ViewCount="727" Body="&lt;p&gt;I have installed &lt;code&gt;Nginx&lt;/code&gt; on Freya, But i don't know how to install phpMyAdmin on a &lt;code&gt;LEMP&lt;/code&gt; server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any easy way to do this?&lt;/p&gt;&#xA;" OwnerUserId="711" LastEditorUserId="129" LastEditDate="2015-08-02T06:51:09.327" LastActivityDate="2015-08-02T07:02:29.240" Title="How can I Install phpMyAdmin on a Nginx?" Tags="|software-installation|web-development|lemp|nginx|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="992" PostTypeId="2" ParentId="991" CreationDate="2015-08-02T06:26:34.223" Score="2" Body="&lt;p&gt;You can install phpMyAdmin from &lt;code&gt;apt-get&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install phpmyadmin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you need to create a symbolic link between phpMyAdmin and your site’s directory.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/share/phpmyadmin/ /var/www/public_html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/share/phpmyadmin/ /usr/share/nginx/www&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you need to restart your Nginx service&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service nginx restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="47" LastActivityDate="2015-08-02T06:26:34.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="993" PostTypeId="2" ParentId="991" CreationDate="2015-08-02T07:02:29.240" Score="0" Body="&lt;p&gt;First update your system local packages and then install phpMyAdmin from package manager.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install phpmyadmin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now create a symbolic link from the installation files to our Nginx document root directory by typing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/share/phpmyadmin /usr/share/nginx/html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now enable the mcrypt PHP module, which phpMyAdmin relies on.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo php5enmod mcrypt&#xA;sudo service php5-fpm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart your Ngnix service.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service nginx restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="129" LastActivityDate="2015-08-02T07:02:29.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="994" PostTypeId="5" CreationDate="2015-08-02T07:57:41.367" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-02T07:57:41.367" LastActivityDate="2015-08-02T07:57:41.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="995" PostTypeId="4" CreationDate="2015-08-02T07:57:41.367" Score="0" Body="Integrated development environment" OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-02T10:40:39.177" LastActivityDate="2015-08-02T10:40:39.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="996" PostTypeId="5" CreationDate="2015-08-02T07:59:10.987" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-02T07:59:10.987" LastActivityDate="2015-08-02T07:59:10.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="997" PostTypeId="4" CreationDate="2015-08-02T07:59:10.987" Score="0" Body="WiFi is a networking technology permitting the exchange of information through wireless (radio) connections." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-02T10:40:41.843" LastActivityDate="2015-08-02T10:40:41.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="998" PostTypeId="1" CreationDate="2015-08-02T08:47:30.643" Score="2" ViewCount="844" Body="&lt;p&gt;All my music and my photos are on a NAS. Those folders are shared via Samba.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems it's impossible to access samba shares when defining the library location for my music or photos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &quot;enter a location&quot; , then typed &quot;smb://myNasName&quot; or &quot;smb://myNasIP&quot; but nothing happens when I click &quot;open&quot;.&#xA;Obvisouly I can access and browse those shares using the file manager using the same path.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway I just discovered Elementary OS, and it looks really great ! &lt;/p&gt;&#xA;" OwnerUserId="712" LastActivityDate="2016-02-29T10:54:51.477" Title="Can't access remote folders in Music / Photo" Tags="|music|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="999" PostTypeId="2" ParentId="984" CreationDate="2015-08-02T09:56:40.550" Score="2" Body="&lt;p&gt;OK, so the problem is with GRUB. It didn't installed properly during the installation.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Why can't you see Linux partitions inside of Windows?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Windows does not support ext4 out of the box. ext4 is the most popular file system for Linux. However, you can see your partitions by installing some third party software (not gonna suggest one of them, but you have &lt;a href=&quot;https://superuser.com/questions/37512/how-to-read-ext4-partitions-on-windows&quot;&gt;plenty of choices&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;What's GRUB?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Basically it's the most popular boot selector that supports Linux. When you install Windows, it installs a small partition called Windows Reserved that it uses as a boot loader and boots you directly inside of Windows. GRUB creates another small partition (250 MB I think) where you can see all of your operating systems and lets you select which one you want to boot into.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Where's the problem?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The problem was that you haven't installed GRUB properly. I'm not sure about the automatic &quot;Install elementary OS alongside Windows&quot; option, however, if you select Something else during the partitioning process, you'll see something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TExqQ.jpg&quot; alt=&quot;01&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not going to talk about the upper part of the window because that's an answer to some other question. What I am going to talk about is that bottom part that says Device for boot loader installation. What you should do here is to select your default hard drive and elementary OS should figure out the rest for itself.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="8517" LastEditDate="2018-12-31T09:23:34.707" LastActivityDate="2018-12-31T09:23:34.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="1000" PostTypeId="1" AcceptedAnswerId="1002" CreationDate="2015-08-02T10:45:18.783" Score="2" ViewCount="2818" Body="&lt;p&gt;I have dual boot and I keep all my data in separate partition and now I am not able to open that partition in freya.&lt;/p&gt;&#xA;" OwnerUserId="714" LastEditorUserId="26" LastEditDate="2015-09-03T11:00:40.537" LastActivityDate="2017-07-20T00:19:31.127" Title="File manager doesn't mount NTFS partitions" Tags="|release-freya|pantheon-files|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1001" PostTypeId="2" ParentId="1000" CreationDate="2015-08-02T10:53:49.363" Score="1" Body="&lt;p&gt;If you are using Windows 8 and later, you might be experiencing problems like that if you didn't shut down Windows correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyhow, try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) find your partition with &lt;code&gt;sudo fdisk -l&lt;/code&gt; under device column(something like &lt;code&gt;/dev/sda1&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) &lt;code&gt;sudo ntfsfix /dev/sda1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Try to mount it again&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="26" LastEditDate="2015-08-02T10:55:41.197" LastActivityDate="2015-08-02T10:55:41.197" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1002" PostTypeId="2" ParentId="1000" CreationDate="2015-08-02T11:23:05.527" Score="3" Body="&lt;p&gt;If you are using Windows 8:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to Control Panel &gt; Hardware and Sound &gt; Power Options &gt; System Settings or search on the main menu &lt;code&gt;power options&lt;/code&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/n1neO.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/n1neO.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose &lt;code&gt;Change what the power buttons do&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;code&gt;Change settings that are currently unavailable&lt;/code&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/LjElR.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LjElR.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Uncheck &lt;code&gt;Turn on fast start-up&lt;/code&gt;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zvXO3.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zvXO3.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This should avoid any problems in the future with unmountable partitions. For safety, shutdown your windows with your &lt;code&gt;Ctrl&lt;/code&gt; key pressed, it forces a regular shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't fix the issue, that's when you should follow Dusan's indications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you don't change this setting in your Windows you might run into this issue everytime you boot into elementary OS coming from Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source and pics: &lt;a href=&quot;http://itsfoss.com/solve-ntfs-mount-problem-ubuntu-windows-8-dual-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dual Mount issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One of the many accounts I've seen of corruptions happening after ntfsfix:&#xA;&lt;a href=&quot;https://sudopacman.wordpress.com/2015/01/09/dont-use-ntfsfix-in-linux-just-turn-off-fast-boot-in-windows/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Don’t use ntfsfix in Linux, just turn off Fast Boot in Windows&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="19" LastEditDate="2015-08-02T11:29:02.977" LastActivityDate="2015-08-02T11:29:02.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1004" PostTypeId="1" AcceptedAnswerId="4044" CreationDate="2015-08-02T13:46:50.783" Score="0" ViewCount="103" Body="&lt;p&gt;Having troubles with integrate and discrete gpu on Freya using bumblebee.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It gives me  &quot;Could not load GPU driver&quot; error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Modules are load in kernel and nvidia driver are installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone could help?&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2016-01-19T17:36:37.913" Title="Cannot access secondary GPU" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1005" PostTypeId="1" CreationDate="2015-08-02T14:44:16.157" Score="2" ViewCount="351" Body="&lt;p&gt;I'm new on Linux and elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything is near ok, except the touchpad. It is recognized by elementary OS, except the &quot;scroll zone&quot; on the right of the touchpad. Is there a fix to recovert this very useful functionality ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="715" LastEditorUserId="3757" LastEditDate="2016-05-05T13:44:25.110" LastActivityDate="2016-10-01T19:20:17.753" Title="Is there a way to set a &quot;scroll zone&quot; on the right side of the touchpad?" Tags="|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1006" PostTypeId="2" ParentId="783" CreationDate="2015-08-02T14:44:45.043" Score="0" Body="&lt;p&gt;I haven't tried it specifically on a Chromebook but on some other low-end laptops.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First thing I noticed is that Freya is quite heavier on resources then Luna was. Also the graphics had quite a few glitches on Intel Core2 Duo w/ integrated graphic card and was barely usable on netbook with Intel Atom processor (and integrated graphics again).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I &quot;solved&quot; it by installing Xubuntu on core2duo notebook and downgrading to Luna on atom netbook which worked fine on both cases.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reported it but the bug report has seen no attention whatsoever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other hand I have quite positive experience with Acer &amp;amp; Linux combo. In general to someone wanting linux laptop I'd recommend Acer or Dell - I had tried both brands myself and heard from friends and both have least issues with linux. BTW the two laptops above I tried with Freya were FS and MSI. Also stay as far away from Gigabyte as possible, for your own good :D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I were you, I'd find a store with the Chromebook you want, grabbed a USB stick with Freya and tried it there :)&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2015-08-02T14:53:48.773" LastActivityDate="2015-08-02T14:53:48.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1007" PostTypeId="1" CreationDate="2015-08-02T14:51:51.177" Score="2" ViewCount="2030" Body="&lt;p&gt;When I go to terminal and try to enter a sudo commands it say's &quot;Username not in the sudoers file.&quot; So how can I be able to use sudo commands.&lt;/p&gt;&#xA;" OwnerUserId="600" LastActivityDate="2018-12-26T21:32:03.157" Title="I can't use sudo commands!" Tags="|pantheon-terminal|sudo|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1008" PostTypeId="2" ParentId="1005" CreationDate="2015-08-02T15:05:41.650" Score="5" Body="&lt;p&gt;You can change it in System Settings (internally called Switchboard) in the Mouse &amp;amp; Touchpad pane. &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;0.4 Loki&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Set the value of &quot;Scrolling&quot; to &quot;Edge&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ff7jq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ff7jq.png&quot; alt=&quot;Mouse &amp;amp; Touchpad in elementary OS 0.4 Loki&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;0.3 Freya&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Untick &quot;scroll with two fingers&quot;, which in turn will enable edge scrolling.&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="68" LastEditDate="2016-10-01T19:20:17.753" LastActivityDate="2016-10-01T19:20:17.753" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1009" PostTypeId="2" ParentId="1007" CreationDate="2015-08-02T15:18:03.433" Score="4" Body="&lt;p&gt;You need &lt;em&gt;some&lt;/em&gt; user account with root priviledges to assign root priviledges to your own account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check if you have any such account on your computer you can either check:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) Switchboard &gt; User accounts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b) checking the content of sudoers file in /etc/sudoers. However I see no way of checking it without sudo other than booting from liveCD and opening it from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not exactly an answer and should have been a comment. However I don't have enough reputation points to comment your question so I've been forced to polute it with fake answer. Thanks for understanding.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2015-08-02T15:18:03.433" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1010" PostTypeId="1" CreationDate="2015-08-02T16:34:47.803" Score="7" ViewCount="1635" Body="&lt;p&gt;I can't wrap my head around the design decision to use over sized icons and tiny scroll bars in the same space. The scroll bars can be hard to grab and sometimes it takes more than one try to use them. It just doesn't make sense when the window could be the same size and view the same amount of information if the icons were smaller and the scroll bars bigger and easier to grab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know Gnome 3.16 has decided they needed even bigger icons, AND a hiding tiny scroll bar, even the details view has over sized icons.&lt;/p&gt;&#xA;" OwnerUserId="716" LastEditorUserId="45" LastEditDate="2015-08-02T22:05:27.690" LastActivityDate="2018-03-18T10:47:46.713" Title="Why are the scroll bars thin?" Tags="|release-freya|design|scrollbars|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="1011" PostTypeId="2" ParentId="1005" CreationDate="2015-08-02T16:48:48.693" Score="0" Body="&lt;p&gt;Try to enable it using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient VertEdgeScroll=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In theory, all you have to do after that is to re-login.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-08-02T22:02:27.393" LastActivityDate="2015-08-02T22:02:27.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1013" PostTypeId="2" ParentId="911" CreationDate="2015-08-02T18:28:54.297" Score="1" Body="&lt;p&gt;Now this post can be marked as solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tuxtux's answer was pretty useful, but what I did before was just plug the elementary OS stick and boot it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Opened the terminal and used &lt;code&gt;locate *grub&lt;/code&gt; to look for the grub folder, and found out that the folder didn't exist. Just found the grub-update folder. So, I just ran &lt;code&gt;sudo update-grub&lt;/code&gt;. Now the computer boots into grub and doesn't skip to Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I just added &lt;code&gt;nomodeset&lt;/code&gt; as tuxtux suggested.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot guys, now I can enjoy the beauty of elementary :)&lt;/p&gt;&#xA;" OwnerUserId="683" LastEditorUserId="34" LastEditDate="2015-08-03T16:16:31.973" LastActivityDate="2015-08-03T16:16:31.973" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1016" PostTypeId="2" ParentId="1010" CreationDate="2015-08-02T22:03:30.073" Score="9" Body="&lt;p&gt;UX lead here :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Scrolling is generally considered something better solved in hardware these days. Whether it's a multi-touch trackpad, mouse, or direct touch input it's not really necessary to hunt down the scrollbar to scroll. In fact you'll notice that most (I haven't used Windows in a while so I'm hesitant saying all) modern operating systems have an overlaid, disappearing scroll bar that it would be better to just call a scroll indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, if you maximize the window, the scroll bar should be accessible from the entire edge of the window. Effectively, the width of the scroll bar becomes infinite here since the cursor will stop at the edge of the display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit on April 18th, 2016:&lt;/strong&gt;&#xA;As of the latest development version of elementary OS 0.4 (Loki), scrollbars now expand on mouse hover&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-04-18T20:14:37.043" LastActivityDate="2016-04-18T20:14:37.043" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="1017" PostTypeId="1" CreationDate="2015-08-02T22:44:55.613" Score="5" ViewCount="847" Body="&lt;p&gt;I am trying to sync my Samsung Galaxy S6 to Noise and Photos, but Noise won't recognize it at all, and Photos gives me the following error. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J3Egl.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J3Egl.png&quot; alt=&quot;Photos: Unable to fetch previews from camera: Could not claim the USB device (-53)&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how I can get these programs to recognize my phone as a storage device to sync photos and music?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="68" LastEditDate="2015-08-03T00:12:56.390" LastActivityDate="2015-11-30T01:48:32.620" Title="How can I get Noise and Photos to recognize my phone?" Tags="|music|usb-drive|photo-editing|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1018" PostTypeId="1" AcceptedAnswerId="1019" CreationDate="2015-08-02T23:49:21.450" Score="6" ViewCount="649" Body="&lt;p&gt;I was messing around in Midori this afternoon and I created a launcher in the Slingshot menu (see image). I didn't really want to do this; it's just a random youtube video, but now I can't figure out how to delete it. It's not listed in the Applications menu in Midori, and it's not in the Software Center. Can someone help me out?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aPbrY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aPbrY.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="45" LastEditDate="2015-08-03T17:42:15.383" LastActivityDate="2015-08-03T17:42:15.383" Title="I created an app launcher in Midori. How can I delete it?" Tags="|slingshot|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1019" PostTypeId="2" ParentId="1018" CreationDate="2015-08-02T23:50:54.527" Score="6" Body="&lt;p&gt;A launcher is basically a &lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;.desktop&lt;/code&gt; file&lt;/a&gt; which you can find in &lt;code&gt;~/.local/share/applications/&lt;/code&gt;. Just delete it and the launcher is gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;code&gt;/usr/share/applications/&lt;/code&gt; contains launchers of other applications for all users.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also be sure to check [~/Desktop/] - this directory is also attached to Slingshot and [&lt;code&gt;.desktop&lt;/code&gt; files] will be added to the launcher, too.&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="704" LastEditDate="2015-08-03T16:16:49.360" LastActivityDate="2015-08-03T16:16:49.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1020" PostTypeId="2" ParentId="353" CreationDate="2015-08-03T01:12:38.460" Score="10" Body="&lt;p&gt;&lt;code&gt;killall slingshot-launcher&lt;/code&gt; worked for me&lt;/p&gt;&#xA;" OwnerUserId="722" LastActivityDate="2015-08-03T01:12:38.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1021" PostTypeId="1" CreationDate="2015-08-03T01:46:48.007" Score="4" ViewCount="1442" Body="&lt;p&gt;First, here are my PC specs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i5 4590&lt;/li&gt;&#xA;&lt;li&gt;Nvidia gtx 960&lt;/li&gt;&#xA;&lt;li&gt;Z97 Anniversary Edition LGA 1150 ATX Intel Motherboard&lt;/li&gt;&#xA;&lt;li&gt;1 TB hard drive&lt;/li&gt;&#xA;&lt;li&gt;8 GB RAM etc....&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Heres my problem. I am trying to boot from a live DVD but I get an error that reads: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unknown chipset&#xA;failed to create 0x80000080&#xA;[   12.448964] nouveau E[     DRM] failed to create 0x80000080, -22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now if I hold down shift doing boot then it will bring me to the menu that says &lt;code&gt;try elementary without installing&lt;/code&gt; etc... but I then I get to the same error. How do I get to the boot menu so I can disable nouveau?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Joe&lt;/p&gt;&#xA;" OwnerUserId="723" LastEditorUserId="129" LastEditDate="2015-08-03T09:35:26.430" LastActivityDate="2015-12-01T16:45:26.710" Title="Problem with Nouveau, cant install" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1023" PostTypeId="1" AcceptedAnswerId="1025" CreationDate="2015-08-03T04:02:59.017" Score="8" ViewCount="3086" Body="&lt;p&gt;I'm not eligible, yet, to update to Windows 10, but I'm considering updating as soon as the update is available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you might understand as a developer I use both OS's, but elementary OS is my main OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what I want to know is, if anyone using dual boot has updated to Windows 10? Are there any consequences? &lt;/p&gt;&#xA;" OwnerUserId="80" LastEditorUserId="3757" LastEditDate="2016-05-07T04:14:52.047" LastActivityDate="2020-03-25T02:12:51.583" Title="Will upgrading to Windows 10 affect my dual-boot setup?" Tags="|release-freya|dual-boot|microsoft-windows|" AnswerCount="6" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1024" PostTypeId="2" ParentId="998" CreationDate="2015-08-03T06:56:09.207" Score="1" Body="&lt;p&gt;You could mount these shares permanently to local folders:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/MountWindowsSharesPermanently&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/MountWindowsSharesPermanently&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-08-03T06:56:09.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1025" PostTypeId="2" ParentId="1023" CreationDate="2015-08-03T07:02:59.060" Score="9" Body="&lt;p&gt;While your other operating system will be intact, updater will install new windows loader and you will have to restore your grub. Meaning that you should have linux live CD / usb at hand to restore grub. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help on how to do this can be found in various places including help ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows&quot;&gt;Help ubuntu: Recovering Ubuntu After Installing Windows&lt;/a&gt;&#xA;or use &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot;&gt;Boot Repair Tool&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your machine uses UEFI, like most new hardware (no legacy boot enabled), grub might (should ?) survive just fine and everything will work just as expected, but I'm not able to verify this right now.&lt;/p&gt;&#xA;" OwnerUserId="374" LastEditorUserId="374" LastEditDate="2015-08-03T07:26:51.757" LastActivityDate="2015-08-03T07:26:51.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1027" PostTypeId="1" CreationDate="2015-08-03T10:17:52.103" Score="1" ViewCount="309" Body="&lt;p&gt;I click on 'Compose new message', compose my message and then what? I don't see a button or icon for send. (If I reply to a message I see a blue 'postage stamp' icon for send. But nothing at all for a new message.)&lt;/p&gt;&#xA;" OwnerUserId="725" LastActivityDate="2015-08-03T14:14:01.803" Title="Where's the Geary send icon/button?" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="3" ClosedDate="2015-08-03T16:39:27.280" ContentLicense="CC BY-SA 3.0" />
  <row Id="1029" PostTypeId="2" ParentId="1027" CreationDate="2015-08-03T12:53:47.620" Score="2" Body="&lt;p&gt;Same here. The buttons only appear when you press &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; to compose the message in a new window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There also seems to be no shortcut to send to get around this, &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt; just opens another previously hidden search box.&lt;/p&gt;&#xA;" OwnerUserId="727" LastEditorUserId="160" LastEditDate="2015-08-03T13:29:52.583" LastActivityDate="2015-08-03T13:29:52.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1030" PostTypeId="2" ParentId="1027" CreationDate="2015-08-03T13:50:59.703" Score="2" Body="&lt;p&gt;Even if all the controls are missing, you can send an email by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Enter&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="728" LastEditorUserId="22" LastEditDate="2015-08-03T14:14:01.803" LastActivityDate="2015-08-03T14:14:01.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1031" PostTypeId="2" ParentId="1021" CreationDate="2015-08-03T13:53:31.180" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;When the liveCD boots and shows a keyboard logo at the bottom, press any key on your keyboard.&lt;/li&gt;&#xA;&lt;li&gt;Select the language you want and press “Enter” (the default is English).&lt;/li&gt;&#xA;&lt;li&gt;Select the menu entry that you want (i.e. “Try elementary OS without installing”).&lt;/li&gt;&#xA;&lt;li&gt;Press “F6” on your keyboard to pull up the “Other Options” menu.&lt;/li&gt;&#xA;&lt;li&gt;Select nomodeset and press “Enter”.&lt;/li&gt;&#xA;&lt;li&gt;Press “Esc” to exit the “Other Options” menu.&lt;/li&gt;&#xA;&lt;li&gt;Press “Enter” to start the liveCD with the nomodeset option.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="533" LastActivityDate="2015-08-03T13:53:31.180" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1032" PostTypeId="2" ParentId="946" CreationDate="2015-08-03T14:03:03.890" Score="2" Body="&lt;p&gt;The elementary OS developers recommend using Unetbootin to burn the ISO to a USB key. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/docs/installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="533" LastActivityDate="2015-08-03T14:03:03.890" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1033" PostTypeId="1" CreationDate="2015-08-03T14:33:00.703" Score="3" ViewCount="4483" Body="&lt;p&gt;The files from my android device get detected only when there is an internet connection. If I am not connected to internet I get an error message: &quot;Unable to mount folder. The server for this folder could not be located.&quot; I can open my files (device will get mounted) once I go online on my system.&#xA;Please help to fix this. I want to connect my phone without going online.&lt;a href=&quot;https://i.stack.imgur.com/9B3W9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9B3W9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="420" LastActivityDate="2016-04-24T18:24:38.793" Title="MTP device connecting problem in files" Tags="|mount|android|mtp|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1034" PostTypeId="1" CreationDate="2015-08-03T17:04:10.557" Score="1" ViewCount="461" Body="&lt;p&gt;I need to install a kernel because I deleted them by mistake. So I booted from a live CD, I opened and mounted my LUKS and LVM volumes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cryptsetup luksOpen /dev/sdf5 my_encrypted_volume&#xA;sudo mount /dev/mapper/my_encrypted_volume /mnt&#xA;sudo mount --bind /dev /mnt/dev&#xA;sudo mount --bind /proc /mnt/proc&#xA;sudo mount --bind /sys /mnt/sys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And when I do &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chroot /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/bin/bash: error while loading shared libraries: /lib/x86_64-linux-gnu/libdl.so.2: file too short&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -l /lib/x86_64-linux-gnu/libdl.so.2; file /lib/x86_64-linux-gnu/libdl.so.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lrwxrwxrwx 1 root root 13 ene 28  2013 /lib/x86_64-linux-gnu/libdl.so.2 -&amp;gt; libdl-2.15.so&#xA;/lib/x86_64-linux-gnu/libdl.so.2: symbolic link to `libdl-2.15.so'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="731" LastEditorUserId="190" LastEditDate="2015-08-04T22:47:20.617" LastActivityDate="2015-08-05T11:46:22.637" Title="Error chroot &quot;/bin/bash: error while loading shared libraries: /lib/x86_64-linux-gnu/libdl.so.2: file too short&quot;" Tags="|shared-libraries|live-cd|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1036" PostTypeId="2" ParentId="353" CreationDate="2015-08-03T17:58:41.680" Score="5" Body="&lt;p&gt;The parts of the desktop like Gala (the window manager), Wingpanel, Plank (the dock), and Slingshot (the apps menu) are automatically restarted by a process called &lt;a href=&quot;https://launchpad.net/cerbere&quot; rel=&quot;nofollow&quot;&gt;Cerbere&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll only need to end the process for Slingshot and Cerbere will automatically restart it. You can do this in Terminal (shortcut: &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt;) with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall slingshot-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastEditorUserId="37" LastEditDate="2016-01-20T19:27:43.757" LastActivityDate="2016-01-20T19:27:43.757" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1038" PostTypeId="2" ParentId="1023" CreationDate="2015-08-03T18:41:20.987" Score="3" Body="&lt;p&gt;I just upgraded by replacing my Windows 7 install with Windows 10 (I couldnt just upgrade; long story). I have 3 drives in my setup: 2 for elementary OS and 1 for windows, grub is installed on the root drive of elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before the installation I unplugged all non windows drives and I didnt even have to reconfigure grub after the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short: I had no issues.&lt;/p&gt;&#xA;" OwnerUserId="734" LastEditorUserId="34" LastEditDate="2015-08-04T08:00:06.027" LastActivityDate="2015-08-04T08:00:06.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1039" PostTypeId="1" AcceptedAnswerId="1046" CreationDate="2015-08-03T19:13:23.517" Score="6" ViewCount="1208" Body="&lt;p&gt;Mint is the only Linux distribution (distro) I've found that lets me play movies I've purchased on Google Play without installing anything extra. What does Mint have in its multimedia pack that other distros don't and is there a way to get them added to elementary OS? &lt;/p&gt;&#xA;" OwnerUserId="653" LastEditorUserId="45" LastEditDate="2015-08-03T20:28:01.493" LastActivityDate="2015-08-04T00:28:46.313" Title="What extra codecs do I need to play movies from Google Play?" Tags="|codec|videos|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1040" PostTypeId="1" CreationDate="2015-08-03T19:15:45.520" Score="1" ViewCount="168" Body="&lt;p&gt;Sometimes, when the computer screen goes off, my laptop will flash the screen on black for a second, give me a cursor for less time that, and then go off. It then repeats this indefinitely. When I was installing via the live CD, it did the same thing, but it did not while I was installing without the live CD. This may because I moved the mouse more, or it took less time. Anyways, I am pasting my specs below. I have had this problem with both the open source driver, and the latest driver from NVIDIA. I have similar issues when waking from sleep.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lenovo ThinkPad W510&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel® Core™ i7 CPU       Q 720  @ 1.60GHz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;11.7 GiB (12 installed, for some reason the graphics is taking 256 MB)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NVIDIA Corporation GT216GLM [Quadro FX 880M] (rev a2)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;240 GB SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fresh install of Elementary OS 0.3 Freya (64-bit) with latest updates&lt;/p&gt;&#xA;" OwnerUserId="735" LastActivityDate="2015-08-03T19:15:45.520" Title="Problem with Graphics/locking up" Tags="|release-freya|graphic-drivers|power|" AnswerCount="0" CommentCount="1" ClosedDate="2016-11-02T15:09:03.873" ContentLicense="CC BY-SA 3.0" />
  <row Id="1041" PostTypeId="1" AcceptedAnswerId="1042" CreationDate="2015-08-03T19:25:05.917" Score="6" ViewCount="763" Body="&lt;p&gt;I just want to listen to the music, but I have to wait for more than 5 minutes until the led turns off, what can I do about it?&lt;/p&gt;&#xA;" OwnerUserId="736" LastActivityDate="2015-08-03T19:57:01.050" Title="How do I turn off the backlight (laptop)" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1042" PostTypeId="2" ParentId="1041" CreationDate="2015-08-03T19:46:45.207" Score="5" Body="&lt;p&gt;You could just open up the terminal and type this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xset dpms force off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you press Enter to execute the command, it'll turn off your monitor instantly. This works with every X server. If you press a key or move a mouse, it goes back on (maybe you want to change a song or something). I'm using this method to listen to the music all of the time.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="138" LastEditDate="2015-08-03T19:57:01.050" LastActivityDate="2015-08-03T19:57:01.050" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1043" PostTypeId="2" ParentId="901" CreationDate="2015-08-03T19:47:52.373" Score="1" Body="&lt;p&gt;&lt;strong&gt;Here is the Solution:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because you already installed elementary OS only the second step is important for you.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;When you boot the live system, move your selection to 'Try elementary OS without installing', then press 'E' on your keyboard (for editing the boot options).&#xA;Move the cursor to the line where it says &quot;Linux ....... splash screen&quot; at the end of the line insert a space and then write 'modprobe.blacklist=dw_dmac,dw_dmac_core'.&#xA;Hit F10 for booting. Now install elementary OS and reboot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Turn on your notebook and do all the updates (sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade).&#xA;Next open a terminal and write 'sudo nano /etc/default/grub', go to the line where it says 'GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;' and change it to 'GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash modprobe.blacklist=dw_dmac,dw_dmac_core&quot;'. On your keyboard press 'Control + X', then 'Y' and 'Enter' to save and exit. Now write 'sudo update-grub' in the terminal.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Reboot and you should be done! &lt;/p&gt;&#xA;" OwnerUserId="737" LastEditorUserId="34" LastEditDate="2015-08-04T08:00:08.683" LastActivityDate="2015-08-04T08:00:08.683" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1044" PostTypeId="2" ParentId="1039" CreationDate="2015-08-03T20:08:05.363" Score="4" Body="&lt;p&gt;Either you can find out what codec(s) those file actually use (there should be a feature in your video player that will tell you), or you can try and add &lt;a href=&quot;https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media&quot; rel=&quot;nofollow&quot;&gt;this ppa&lt;/a&gt;, which has the latest VLC player and, among other things, the decoder necessary to watch H.265-encoded videos.&lt;/p&gt;&#xA;" OwnerUserId="602" LastActivityDate="2015-08-03T20:08:05.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1045" PostTypeId="1" AcceptedAnswerId="1185" CreationDate="2015-08-03T23:00:21.213" Score="3" ViewCount="607" Body="&lt;p&gt;I tried using Midori-Granite for a while.  But it seems that every so often, it crashes.  So, instead, I started using regular ol' Midori.  While this one works, I can't seem to see my bookmarks under Midori.  I tried exporting the bookmarks from Midori-Granite and importing them into Midori, but that didn't work, either.  So is there a way to transfer my bookmarks from Midori-Granite to Midori?&lt;/p&gt;&#xA;" OwnerUserId="740" LastActivityDate="2015-08-08T16:17:30.553" Title="Can't transfer bookmarks from Midori-Granite to Midori" Tags="|midori|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1046" PostTypeId="2" ParentId="1039" CreationDate="2015-08-04T00:28:46.313" Score="3" Body="&lt;p&gt;If you are attempting to play the video DRM protected video content in your browser, then according to the Google Play help, you will require Adobe Flash player. See: &lt;a href=&quot;https://support.google.com/googleplay/answer/2844198?hl=en&quot; rel=&quot;nofollow&quot;&gt;https://support.google.com/googleplay/answer/2844198?hl=en&lt;/a&gt;. The system requirements note that Ubuntu and Linux OS users (so including elementary OS) must install the HAL module. A third party PPA provides the necessary module (see &lt;a href=&quot;http://www.omgubuntu.co.uk/2013/10/fixing-amazon-prime-streaming-drm-protected-flash-13-10&quot; rel=&quot;nofollow&quot;&gt;http://www.omgubuntu.co.uk/2013/10/fixing-amazon-prime-streaming-drm-protected-flash-13-10&lt;/a&gt;). Let us know if this works for you.&lt;/p&gt;&#xA;" OwnerUserId="644" LastActivityDate="2015-08-04T00:28:46.313" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1047" PostTypeId="1" CreationDate="2015-08-04T02:43:45.340" Score="3" ViewCount="169" Body="&lt;h1&gt;English:&lt;/h1&gt;&#xA;&lt;p&gt;Hello I want to use the point of the calculator &amp;quot;.&amp;quot; the numeric keypad but it only takes me &amp;quot;,&amp;quot; the other way gives me error.&lt;br /&gt;&#xA;Any way you could configure this without changing the locale? My language environment is &amp;quot;Spanish, Argentina&amp;quot;.&lt;/p&gt;&#xA;&lt;h1&gt;Español:&lt;/h1&gt;&#xA;&lt;p&gt;Hola quiero usar el punto de la calculadora &amp;quot;.&amp;quot; del teclado decimal pero sólo me toma &amp;quot;,&amp;quot; de la otra forma me da error.&lt;br /&gt;&#xA;Alguna forma de poder configurar esto sin tener que cambiar la configuración regional ? Mi idioma del entorno es &amp;quot;Español, Argentina&amp;quot;.&lt;/p&gt;&#xA;" OwnerUserId="361" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-04T17:13:50.903" Title="How to use the decimal point in the calculator under a Spanish Locale?" Tags="|release-freya|applications|keyboard|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1048" PostTypeId="2" ParentId="1047" CreationDate="2015-08-04T03:11:34.247" Score="3" Body="&lt;h1&gt;English:&lt;/h1&gt;&#xA;&lt;p&gt;My system has the English language but the decimal is changed in System Settings&amp;gt; Language &amp;amp; Region and marks Numbers &amp;amp; Dates well as United States and work.&lt;/p&gt;&#xA;&lt;h1&gt;Español:&lt;/h1&gt;&#xA;&lt;p&gt;Mi sistema tiene el lenguaje ingles pero se cambie el decimal en los System Settings &amp;gt; Language &amp;amp; Region y marca Numbers &amp;amp; Dates como United States y asi funcionara.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-04T15:58:30.970" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1049" PostTypeId="5" CreationDate="2015-08-04T05:35:24.660" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-04T05:35:24.660" LastActivityDate="2015-08-04T05:35:24.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1050" PostTypeId="4" CreationDate="2015-08-04T05:35:24.660" Score="0" Body="Midori is a lightweight, fast, and free web browser. It aligns well with the Xfce philosophy of making the most out of available resources. It is the default browser in elementary OS." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-04T06:58:27.770" LastActivityDate="2015-08-04T06:58:27.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1051" PostTypeId="5" CreationDate="2015-08-04T05:36:53.667" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-04T05:36:53.667" LastActivityDate="2015-08-04T05:36:53.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1052" PostTypeId="4" CreationDate="2015-08-04T05:36:53.667" Score="0" Body="Questions related to the configuration and activation of touchpad / trackpads." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-04T06:58:21.783" LastActivityDate="2015-08-04T06:58:21.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1053" PostTypeId="1" CreationDate="2015-08-04T06:28:38.890" Score="2" ViewCount="532" Body="&lt;p&gt;I am having an issue with keeping the Android Studio app on my dock. It's the same with google-chrome but I haven't found any easy way to get rid of it. Whenever I open up the application, a blurry second icon pops up, just like the google-chrome icon issue. If anybody could help me, that would be amazing. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="741" LastActivityDate="2015-08-04T09:37:48.737" Title="Android Studio Blurry Second Icon on Plank" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ClosedDate="2015-08-04T17:02:31.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="1054" PostTypeId="1" CreationDate="2015-08-04T07:27:59.390" Score="2" ViewCount="2222" Body="&lt;p&gt;This is how it happened:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;julian@JulianNB:~$ sudo chmod 644 ~/音樂/* &#xA;[sudo] password for julian: &#xA;julian@JulianNB:~$ sudo chmod 755 ~/音樂/*/&#xA;julian@JulianNB:~$ sudo chmod 644 ~/音樂/*/*&#xA;sudo: unable to execute /bin/chmod: Argument list too long&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I just want to set 755 to every folder and 644 to every music files in the ~/音樂/&lt;/p&gt;&#xA;" OwnerUserId="736" LastActivityDate="2015-08-04T07:39:46.130" Title="&quot;unable to execute /bin/chmod: Argument list too long&quot; when I'm trying to use chmod command" Tags="|command-line|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1055" PostTypeId="1" CreationDate="2015-08-04T07:36:41.323" Score="2" ViewCount="1382" Body="&lt;p&gt;Is there an easy option to change or edit the default application switcher?&lt;br&gt;&#xA;The current switcher is pretty cool with this fade of the windows and the reordered Plank when I just enjoy the system, but when I work I need to remove all animations/fades and those little slowdowns.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment I am with two monitors an when I press Alt+Tab the application at the current window is fading to the left/right (depending on which monitor) edge of the monitor which is the center of the two monitors together, but it is annoying for me. I prefer to disable this fade.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also Plank animation when Alt-Tabing is small. I like bigger in the middle of the monitor switchers, something like Unity default switcher.&lt;/p&gt;&#xA;" OwnerUserId="369" LastActivityDate="2015-08-04T08:19:31.533" Title="Change application switcher" Tags="|release-freya|applications|window-management|" AnswerCount="1" CommentCount="1" ClosedDate="2015-08-04T16:56:15.217" ContentLicense="CC BY-SA 3.0" />
  <row Id="1056" PostTypeId="2" ParentId="1054" CreationDate="2015-08-04T07:39:46.130" Score="1" Body="&lt;p&gt;You can try this &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find ~/音樂/ -type d -exec chmod 755 {} \; &amp;amp;&amp;amp; find ~/音樂/ -type f -exec chmod 644 {} \;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have set this as alias in my ~/.bashrc&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias fixpermissions=&quot;find . -type d -exec chmod 755 {} \; &amp;amp;&amp;amp; find . -type f -exec chmod 644 {} \;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="369" LastActivityDate="2015-08-04T07:39:46.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1057" PostTypeId="2" ParentId="1055" CreationDate="2015-08-04T08:04:41.013" Score="1" Body="&lt;p&gt;You can tweak that behaviour with elementary tweaks or dconf-editor in&#xA;&lt;code&gt;/org/pantheon/desktop/gala/animations/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit #1: Well, some of them, not sure about alt+ tab fade animations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit #2: This might be a solution, although, i haven't tested it yet and you need to build it from source: &lt;a href=&quot;http://www.reddit.com/r/elementaryos/comments/2vy27d/is_there_any_way_to_disable_the_alttab_animation/&quot; rel=&quot;nofollow&quot;&gt;Custom Gala Window Manager&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="675" LastEditDate="2015-08-04T08:19:31.533" LastActivityDate="2015-08-04T08:19:31.533" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1058" PostTypeId="2" ParentId="1053" CreationDate="2015-08-04T08:34:37.617" Score="3" Body="&lt;p&gt;Do you have it's .desktop file installed in &lt;code&gt;/usr/share/applications/&lt;/code&gt; or &lt;code&gt;~/.local/share/applications&lt;/code&gt;? If you do, add &lt;code&gt;StartupWMClass=jetbrains-studio&lt;/code&gt; to it, it should work then.&lt;/p&gt;&#xA;" OwnerUserId="675" LastActivityDate="2015-08-04T08:34:37.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1059" PostTypeId="1" AcceptedAnswerId="1204" CreationDate="2015-08-04T09:19:23.760" Score="3" ViewCount="150" Body="&lt;p&gt;I removed &lt;code&gt;indicator-session&lt;/code&gt; by accident. Now, when I try to install it again through apt-get I get this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;  indicator-session libaccount-plugin-1.0-0 libaccount-plugin-generic-oauth&#xA;  libaccount-plugin-google libaccounts-qt5-1 libqt5core5a libqt5dbus5&#xA;  libqt5gui5 libqt5network5 libqt5opengl5 libqt5positioning5&#xA;  libqt5printsupport5 libqt5qml5 libqt5quick5 libqt5sensors5 libqt5sql5&#xA;  libqt5sql5-sqlite libqt5test5 libqt5webkit5 libqt5widgets5 libqt5xml5&#xA;  libsignon-extension1 libsignon-plugins-common1 libsignon-qt5-1&#xA;  libtimezonemap1 libunity-control-center1 libxcb-icccm4 libxcb-image0&#xA;  libxcb-keysyms1 libxcb-randr0 libxcb-render-util0 libxcb-xkb1&#xA;  libxkbcommon-x11-0 session-migration signon-keyring-extension&#xA;  signon-plugin-oauth2 signon-ui signond unity-control-center&#xA;  unity-control-center-signon unity-settings-daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;These packages &lt;em&gt;weren't&lt;/em&gt; installed before. How do I install &lt;code&gt;indicator-session&lt;/code&gt; back without installing all these extra packages?&lt;/p&gt;&#xA;" OwnerUserId="90" LastEditorUserId="190" LastEditDate="2015-08-09T19:02:05.337" LastActivityDate="2015-08-09T19:02:05.337" Title="How can I install indicator-session without pulling in extra packages?" Tags="|apt|package-management|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1062" PostTypeId="1" CreationDate="2015-08-04T10:43:22.107" Score="7" ViewCount="709" Body="&lt;p&gt;The key binding for moving an application to the workspace to the left or right does not appear to work. &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Left / Right&lt;/kbd&gt; is listed as the appropriate binding in my settings -&gt; keyboard -&gt; shortcuts -&gt; workspaces but it does not appear to work. How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="677" LastEditorUserId="45" LastEditDate="2015-08-04T22:20:09.273" LastActivityDate="2015-09-24T11:08:34.973" Title="What is the keyboard shortcut to move across workspaces?" Tags="|keyboard-shortcuts|gala|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1063" PostTypeId="2" ParentId="1062" CreationDate="2015-08-04T10:54:55.743" Score="3" Body="&lt;p&gt;It seems to be a bug in the keyboard settings plug, use &lt;kbd&gt;Alt&lt;/kbd&gt; instead of &lt;kbd&gt;Shift&lt;/kbd&gt; to move an application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Move to workspace 1: &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;1&lt;/kbd&gt;&lt;br&gt;&#xA;Move to workspace 2: &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;2&lt;/kbd&gt;&lt;br&gt;&#xA;Move to workspace 3: &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;3&lt;/kbd&gt;&lt;br&gt;&#xA;...&lt;br&gt;&#xA;Move to left &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Left&lt;/kbd&gt;&lt;br&gt;&#xA;Move to right &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Right&lt;/kbd&gt; &lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-04T10:54:55.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1064" PostTypeId="2" ParentId="1062" CreationDate="2015-08-04T11:04:50.563" Score="7" Body="&lt;p&gt;I just posted this question in case others had the same problem as me. Here is what I discovered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem stems from &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;&lt;kbd&gt;Left&lt;/kbd&gt; and &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;&lt;kbd&gt;Right&lt;/kbd&gt; already being assigned as shortcuts. Install dconf-editor and navigate to org &gt; gnome &gt; desktop &gt; wm &gt; keybindings. From this you will see that move-to-workspace-left/right is assign both &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;&lt;kbd&gt;Left&lt;/kbd&gt;/&lt;kbd&gt;Right&lt;/kbd&gt; and &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;Left&lt;/kbd&gt;/&lt;kbd&gt;Right&lt;/kbd&gt;. If you want to utilise the &lt;kbd&gt;Shift&lt;/kbd&gt; option, then delete the assignments for move-to-monitor-left and move-to-monitor-right as it also uses the same keybinding. I assume these assignments were to move windows between multiple monitors, so if you have more than one monitor set up perhaps delete &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;&lt;kbd&gt;Left&lt;/kbd&gt; and &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;&lt;kbd&gt;Right&lt;/kbd&gt; from the keybindings for move-to-workspace-left and move-to-workspace-right, leaving &lt;kbd&gt;Super&lt;/kbd&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;Left&lt;/kbd&gt;/&lt;kbd&gt;Right&lt;/kbd&gt; as your navigation options.&lt;/p&gt;&#xA;" OwnerUserId="677" LastEditorUserId="677" LastEditDate="2015-08-04T11:10:07.993" LastActivityDate="2015-08-04T11:10:07.993" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1067" PostTypeId="1" CreationDate="2015-08-04T12:59:28.860" Score="2" ViewCount="688" Body="&lt;p&gt;I’m on Freya with all the latest updates. I’d like to use 5.1 surround sound output via HDMI, but the sound settings only offer me stereo output via HDMI. I tested Xubuntu 15.04 (Vivid), booted from a thumb drive, which gave me surround options via HDMI out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to get whatever is needed from a ppa or other source? Or do I have to migrate that machine to Vivid?&lt;/p&gt;&#xA;" OwnerUserId="602" LastActivityDate="2015-09-19T07:43:03.710" Title="How do I get 5.1 surround sound via HDMI to work?" Tags="|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1069" PostTypeId="1" CreationDate="2015-08-04T15:07:13.597" Score="2" ViewCount="1996" Body="&lt;p&gt;I am trying to install elementary OS Freya to my desktop PC at home.&lt;/p&gt;&#xA;&lt;p&gt;I have a Netgear WNDA3100v3 USB WiFi adapter that does not appear to be PNP with Freya. The apartment I live in does not have any support for wired network connections.&lt;/p&gt;&#xA;&lt;p&gt;How can I get elementary OS to recognize the WiFi adapter so I can connect to the network and install?&lt;/p&gt;&#xA;&lt;p&gt;Edit: I have used &lt;code&gt;lsusb&lt;/code&gt; and determined my device ID with the following line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Bus 003 Device 007: ID 0846:9014 Netgear, Inc.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;On my laptop, I found &lt;a href=&quot;http://web.archive.org/web/20191003054025/https://wikidevi.com/wiki/Netgear_WNDA3100v3&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link&lt;/a&gt; and to followed the link there to the Netgear page with a standalone &lt;code&gt;installer.exe&lt;/code&gt; and downloaded it, but I'm unsure how to proceed.&lt;/p&gt;&#xA;" OwnerUserId="753" LastEditorUserId="84" LastEditDate="2021-07-27T20:17:11.133" LastActivityDate="2021-07-27T20:17:11.133" Title="How can I get my USB WiFi Adapter working for my installation?" Tags="|system-installation|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="1070" PostTypeId="1" CreationDate="2015-08-04T15:23:19.043" Score="6" ViewCount="53" Body="&lt;p&gt;In Ubuntu, I have the option - in Settings/Details - to configure what applications and actions to use/do when a DVD is inserted.&#xA;Although libdvdread4 is installed in my client's Freya OS, I couldn't find the Settings/Details dialog.&#xA;I want to be able to set up her Freya in regards to applications/actions when a DVD is inserted.&lt;/p&gt;&#xA;" OwnerUserId="755" LastEditorUserId="755" LastEditDate="2015-08-04T19:59:16.450" LastActivityDate="2015-08-04T20:13:47.010" Title="Can I make a dialog appear to ask what to do when I insert a DVD?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-18T14:50:47.550" ContentLicense="CC BY-SA 3.0" />
  <row Id="1072" PostTypeId="1" CreationDate="2015-08-04T15:33:03.240" Score="1" ViewCount="316" Body="&lt;p&gt;Apt-get update is hanging at 100%, I've restored my sources.list file to default, yet the problem persists. It's not really a huge issue since it appears to have completed, but it's just cosmetically hung. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;uname -a&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Linux eOS 3.16.0-45-generic #60~14.04.1-Ubuntu SMP Fri Jul 24 21:16:23 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here's my apt-get log &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Ign hxxp://us.archive.ubuntu.com trusty InRelease&#xA;    Hit hxxp://repo.steampowered.com precise InRelease&#xA;    Ign hxxp://us.archive.ubuntu.com trusty-updates InRelease&#xA;    Hit hxxp://repo.steampowered.com precise/steam Sources&#xA;    Ign hxxp://us.archive.ubuntu.com trusty-backports InRelease&#xA;    Ign hxxp://ppa.launchpad.net trusty InRelease&#xA;    Hit hxxp://us.archive.ubuntu.com trusty Release.gpg&#xA;    Ign hxxp://security.ubuntu.com trusty-security InRelease&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates Release.gpg&#xA;    Hit hxxp://repo.steampowered.com precise/steam amd64 Packages&#xA;    Ign hxxp://ppa.launchpad.net trusty InRelease&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports Release.gpg&#xA;    Hit hxxp://security.ubuntu.com trusty-security Release.gpg&#xA;    Hit hxxp://us.archive.ubuntu.com trusty Release&#xA;    Hit hxxp://repo.steampowered.com precise/steam i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates Release100% [Working] &#xA;    Ign hxxp://ppa.launchpad.net trusty InRelease&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports Release&#xA;    Hit hxxp://security.ubuntu.com trusty-security Release&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/main Sources&#xA;    Hit hxxp://ppa.launchpad.net trusty Release.gpg&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/restricted Sources&#xA;    Hit hxxp://security.ubuntu.com trusty-security/main Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/universe Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/multiverse Sources&#xA;    Hit hxxp://ppa.launchpad.net trusty Release.gpg&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/main amd64 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/restricted Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/restricted amd64 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty Release.gpg&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/universe amd64 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/universe Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/multiverse amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/main i386 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty Release&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/restricted i386 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/multiverse Sources&#xA;    Hit hxxp://ppa.launchpad.net trusty Release&#xA;    Hit hxxp://security.ubuntu.com trusty-security/main amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/universe i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/multiverse i386 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty Release&#xA;    Hit hxxp://security.ubuntu.com trusty-security/restricted amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/main Translation-en&#xA;    Hit hxxp://ppa.launchpad.net trusty/main Sources&#xA;    Hit hxxp://security.ubuntu.com trusty-security/universe amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/multiverse Translation-en&#xA;    Hit hxxp://ppa.launchpad.net trusty/main amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/restricted Translation-en&#xA;    Hit hxxp://security.ubuntu.com trusty-security/multiverse amd64 Packages&#xA;    Ign hxxp://repo.steampowered.com precise/steam Translation-en_US&#xA;    Hit hxxp://us.archive.ubuntu.com trusty/universe Translation-en&#xA;    Hit hxxp://ppa.launchpad.net trusty/main i386 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/main i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/main Sources&#xA;    Ign hxxp://repo.steampowered.com precise/steam Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/restricted Sources&#xA;    Hit hxxp://ppa.launchpad.net trusty/main Translation-en&#xA;    Hit hxxp://security.ubuntu.com trusty-security/restricted i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/universe Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/multiverse Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/main amd64 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty/main Sources&#xA;    Hit hxxp://security.ubuntu.com trusty-security/universe i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/restricted amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/universe amd64 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty/main amd64 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/multiverse i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/multiverse amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/main i386 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty/main i386 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/main Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/restricted i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/universe i386 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty/main Translation-en&#xA;    Hit hxxp://security.ubuntu.com trusty-security/multiverse Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/multiverse i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/main Translation-en&#xA;    Hit hxxp://ppa.launchpad.net trusty/main amd64 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/restricted Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/multiverse Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/restricted Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-updates/universe Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/main Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/restricted Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/universe Sources&#xA;    Hit hxxp://ppa.launchpad.net trusty/main i386 Packages&#xA;    Hit hxxp://security.ubuntu.com trusty-security/universe Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/multiverse Sources&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/main amd64 Packages&#xA;    Hit hxxp://ppa.launchpad.net trusty/main Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/restricted amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/universe amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/multiverse amd64 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/main i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/restricted i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/universe i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/multiverse i386 Packages&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/main Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/multiverse Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/restricted Translation-en&#xA;    Hit hxxp://us.archive.ubuntu.com trusty-backports/universe Translation-en&#xA;    Ign hxxp://us.archive.ubuntu.com trusty/main Translation-en_US&#xA;    Ign hxxp://us.archive.ubuntu.com trusty/multiverse Translation-en_US&#xA;    Ign hxxp://us.archive.ubuntu.com trusty/restricted Translation-en_US&#xA;    Ign hxxp://us.archive.ubuntu.com trusty/universe Translation-en_US&#xA;    100% [Working]  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# deb cdrom:[elementary OS 0.3 _Freya_ - Stable amd64 (20150411)]/ trusty main restricted&#xA;&#xA;# See hxxp://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty main restricted&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty universe&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty universe&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates universe&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb hxxp://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse&#xA;deb-src hxxp://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse&#xA;&#xA;deb hxxp://security.ubuntu.com/ubuntu trusty-security main restricted&#xA;deb-src hxxp://security.ubuntu.com/ubuntu trusty-security main restricted&#xA;deb hxxp://security.ubuntu.com/ubuntu trusty-security universe&#xA;deb-src hxxp://security.ubuntu.com/ubuntu trusty-security universe&#xA;deb hxxp://security.ubuntu.com/ubuntu trusty-security multiverse&#xA;deb-src hxxp://security.ubuntu.com/ubuntu trusty-security multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb hxxp://archive.canonical.com/ubuntu trusty partner&#xA;# deb-src hxxp://archive.canonical.com/ubuntu trusty partner&#xA;&#xA;## Uncomment the following two lines to add software from Ubuntu's&#xA;## 'extras' repository.&#xA;## This software is not part of Ubuntu, but is offered by third-party&#xA;## developers who want to ship their latest software.&#xA;# deb hxxp://extras.ubuntu.com/ubuntu trusty main&#xA;# deb-src hxxp://extras.ubuntu.com/ubuntu trusty main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="754" LastActivityDate="2015-08-04T15:59:43.863" Title="apt-get hanging 100% waiting default repos" Tags="|apt|aptitude|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1073" PostTypeId="2" ParentId="1072" CreationDate="2015-08-04T15:59:43.863" Score="1" Body="&lt;p&gt;I think I resolved this. Apparently the sources.list isn't the only place that contains repositories. I ended up opening the software center and went to edit &gt;software sources. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There was a repo for steam and tox. Once I removed those apt-get behaved normally. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry!  &lt;/p&gt;&#xA;" OwnerUserId="754" LastActivityDate="2015-08-04T15:59:43.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1074" PostTypeId="2" ParentId="1069" CreationDate="2015-08-04T16:32:08.990" Score="4" Body="&lt;p&gt;There is no support for that chipset in the Linux kernel, but you can try to build one yourself. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://forums.gentoo.org/viewtopic-p-7727920.html&quot; rel=&quot;nofollow&quot;&gt;https://forums.gentoo.org/viewtopic-p-7727920.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="533" LastActivityDate="2015-08-04T16:32:08.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1076" PostTypeId="2" ParentId="18" CreationDate="2015-08-04T18:02:46.857" Score="8" Body="&lt;p&gt;Here's a one-liner to fix the issue as described in Gabriel's answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cp /usr/share/applications/google-chrome.desktop ~/.local/share/applications &amp;amp;&amp;amp; sed --in-place --regexp-extended 's/^(\[[A-Za-z ]+\])$/\1\nStartupWMClass=Google-chrome-stable/g' ~/.local/share/applications/google-chrome.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To unpack and explain this command line a bit: first it copies (&lt;code&gt;cp&lt;/code&gt;) the global .desktop file to your user directory, since the latter overrides the former for the current user, and isn't changed by package upgrades.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that operation succeeds (&lt;code&gt;&amp;amp;&amp;amp;&lt;/code&gt;), it then uses the &lt;code&gt;sed&lt;/code&gt; command to do a find-replace operation, which follows the pattern &lt;code&gt;sed 's/&amp;lt;find&amp;gt;/&amp;lt;replace&amp;gt;/&amp;lt;flags&amp;gt;'&lt;/code&gt; (where &lt;code&gt;s&lt;/code&gt; stands for &quot;substitute&quot;). Step by step, here's what that &lt;code&gt;sed&lt;/code&gt; command says:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;find all lines that start with &lt;code&gt;[&lt;/code&gt; and end with &lt;code&gt;]&lt;/code&gt; (that's the &lt;code&gt;^(\[[A-Za-z ]+\])$&lt;/code&gt; part — &lt;a href=&quot;http://regexr.com/3bkjd&quot; rel=&quot;nofollow&quot;&gt;RegExr&lt;/a&gt; or &lt;a href=&quot;https://regex101.com/r/yG2gY2/1&quot; rel=&quot;nofollow&quot;&gt;Regex101&lt;/a&gt; can explain it much better than I could here :))&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;replace them with themselves (&lt;code&gt;\1&lt;/code&gt;) followed by a newline (&lt;code&gt;\n&lt;/code&gt;) and the string &quot;StartupWMClass=Google-chrome-stable&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;and do this to all of them, i.e. using the global flag (&lt;code&gt;/g&lt;/code&gt;), and directly editing the file (&lt;code&gt;--in-place&lt;/code&gt;) rather than outputting to the shell. The last argument is the filename to pass to &lt;code&gt;sed&lt;/code&gt;, which is the file the &lt;code&gt;cp&lt;/code&gt; command has just created.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-08-20T16:42:44.587" LastActivityDate="2015-08-20T16:42:44.587" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1077" PostTypeId="2" ParentId="1070" CreationDate="2015-08-04T20:13:47.010" Score="2" Body="&lt;p&gt;Ultimatelly, what I need is that whenever a DVD is inserted Frey asks what to do or automatically start a specific application.&#xA;And it seems that Freya actually lacks that functionality, according to &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1211118&quot; rel=&quot;nofollow&quot;&gt;this bug report&lt;/a&gt;.&#xA;So, for now, it seems that the answer to my question is... &quot;No, you can't&quot;.&lt;/p&gt;&#xA;" OwnerUserId="755" LastActivityDate="2015-08-04T20:13:47.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1078" PostTypeId="1" CreationDate="2015-08-04T21:12:43.523" Score="8" ViewCount="110" Body="&lt;p&gt;I'm currently using Midori with headerbar support from the elementary OS Daily PPA. Is there any way to hide the advertisement blocker button next to the menu button in the headerbar, without deactivating the extension?&lt;/p&gt;&#xA;" OwnerDisplayName="user479" LastEditorDisplayName="user479" LastEditDate="2015-08-04T23:20:54.820" LastActivityDate="2015-11-03T00:38:13.600" Title="How can I hide the advertisement blocker button in Midori's headerbar?" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1079" PostTypeId="2" ParentId="1078" CreationDate="2015-08-04T21:42:56.473" Score="1" Body="&lt;p&gt;You can turn off the advertisement blocker extension in preferences:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the gear menu&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select the &quot;Extensions&quot; tab&lt;/li&gt;&#xA;&lt;li&gt;Un-check &quot;Advertisement blocker&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-04T21:42:56.473" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1080" PostTypeId="1" CreationDate="2015-08-04T22:15:56.777" Score="4" ViewCount="420" Body="&lt;p&gt;I have Minecraft and it works perfectly but I want to make a server so I can play with my friends. I tried doing it the way you would do it for Mac OS but it won't work. Is there a specific way for elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="600" LastEditorUserId="45" LastEditDate="2015-08-05T00:07:15.647" LastActivityDate="2015-08-05T10:21:43.673" Title="How can I make a Minecraft server?" Tags="|games|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1082" PostTypeId="2" ParentId="1023" CreationDate="2015-08-04T22:53:23.663" Score="0" Body="&lt;p&gt;I just want to point out, that updating from 8.1 to windows 10 without doing a clean install is painless. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or at least in my case it was painless, except for the part where Windows restarts 6 times while updating. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if you have elementary as your main option on grub consider changing it temporarily, or else you will need to be checking your pc from time time, just to see if it has restarted and entered elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="80" LastActivityDate="2015-08-04T22:53:23.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1083" PostTypeId="1" AcceptedAnswerId="1085" CreationDate="2015-08-05T01:49:09.337" Score="10" ViewCount="721" Body="&lt;p&gt;I'm trying to have multiple timezones displayed when clicking on the clock, a behavior available in Luna but missing in Freya. After several months I still didn't see this option added back. Is there any way to make it work, or a workaround to see multiple timezones?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="370" LastActivityDate="2018-06-10T03:24:38.277" Title="How can I add multiple timezones to Freya?" Tags="|release-freya|clock|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1085" PostTypeId="2" ParentId="1083" CreationDate="2015-08-05T08:31:48.450" Score="5" Body="&lt;h2&gt;1. Install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You will need to install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;2. Set your Locations&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Once installed,  go to &lt;code&gt;com.canonical.indicator.datetime&lt;/code&gt; and look for &lt;code&gt;locations&lt;/code&gt; variable and add your desired locations, separated with commas, and between ' '.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They should look something like these:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;['America/Los_Angeles Los Angeles', 'America/New_York New York', 'Europe/London London', 'Europe/Paris Paris', 'Asia/Tokyo Tokyo']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you don't know timezone names, you can go to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.m.wikipedia.org/wiki/List_of_tz_database_time_zones&quot; rel=&quot;nofollow&quot;&gt;TZ database- Wikipedia &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;3. Enable Locations&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Click on &lt;code&gt;show-locations&lt;/code&gt; checkbox. To disable, you can simply uncheck this option.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="26" LastEditDate="2015-09-10T17:15:22.333" LastActivityDate="2015-09-10T17:15:22.333" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1086" PostTypeId="1" AcceptedAnswerId="1093" CreationDate="2015-08-05T09:00:36.303" Score="10" ViewCount="2559" Body="&lt;p&gt;How do I change the icon size in Files?&lt;/p&gt;&#xA;" OwnerUserId="762" LastEditorUserId="26" LastEditDate="2015-09-03T10:23:01.147" LastActivityDate="2015-09-03T10:23:01.147" Title="How do I change the icon size (zoom) in Files" Tags="|pantheon-files|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1087" PostTypeId="2" ParentId="1086" CreationDate="2015-08-05T09:02:40.177" Score="5" Body="&lt;p&gt;To zoom in Files you can use &lt;kbd&gt;Ctrl&lt;/kbd&gt; + the scroll wheel on your mouse.&lt;/p&gt;&#xA;" OwnerUserId="762" LastEditorUserId="762" LastEditDate="2015-08-05T13:56:09.573" LastActivityDate="2015-08-05T13:56:09.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1089" PostTypeId="2" ParentId="1080" CreationDate="2015-08-05T10:21:43.673" Score="7" Body="&lt;p&gt;You can host your server like this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Create a directory for your server.&lt;br&gt;&#xA;&lt;code&gt;cd &amp;amp;&amp;amp; mkdir Server&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change your active directory to the new folder.&lt;br&gt;&#xA;&lt;code&gt;cd Server&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Let's download the latest minecraft server (in this case 1.8.8).&lt;br&gt;&#xA;&lt;code&gt;wget https://s3.amazonaws.com/Minecraft.Download/versions/1.8.8/minecraft_server.1.8.8.jar -O minecraft_server.jar&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;We need to have openjre installed (you probably already have this for the mc client).&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install openjdk-7-jre&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Create a bash script to run your server.&lt;br&gt;&#xA;&lt;code&gt;touch server.sh &amp;amp;&amp;amp; chmod +x server.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Time to edit our script&lt;br&gt;&#xA;&lt;code&gt;scratch-text-editor server.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Paste this and save&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash -       &#xA;#title           :server.sh&#xA;#===================================&#xA;&#xA;java -Xmx1024M -Xms1024M -jar minecraft_server.jar nogui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run our server with:&lt;br&gt;&#xA;&lt;code&gt;./server.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You'll have to agree with the EULA but since you've already done it under Mac I'll trust you don't need help with that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under normal operation, just &lt;code&gt;cd Server&lt;/code&gt; and &lt;code&gt;./server.sh&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastActivityDate="2015-08-05T10:21:43.673" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1090" PostTypeId="1" AcceptedAnswerId="1091" CreationDate="2015-08-05T10:35:28.893" Score="36" ViewCount="40803" Body="&lt;p&gt;Which setup, tools and customization can optimise elementary OS towards achieving maximal battery life time on laptops?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="3757" LastEditDate="2016-03-21T05:37:35.397" LastActivityDate="2016-12-27T16:34:54.203" Title="How to optimize elementary OS for maximal battery life time on laptops?" Tags="|battery|laptop|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1091" PostTypeId="2" ParentId="1090" CreationDate="2015-08-05T11:31:23.193" Score="36" Body="&lt;p&gt;The simplest way is installing tlp( tlp's default settings are a good balance between performance and power save)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linrunner/tlp&#xA;sudo apt-get update &#xA;sudo apt-get install tlp tlp-rdw&#xA;sudo tlp start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install thermald (like Saeed suggested)&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install thermald&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Leaving Bluetooth turned off also saves you battery. (TLP allows you to configure this in &lt;code&gt;/etc/default/tlp&lt;/code&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For Intel:&#xA;It may also be beneficial to use intel integrated graphics instead of your discrete graphics card if you have one.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For Intel i3,5,7:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install intel-microcode&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For AMD:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install amd64-microcode&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I've noticed better battery life (may be placebo, didn't take stats) after installing microcode packages. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Monitoring and Tunables (powertop)&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install powertop&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;sudo powertop&lt;/code&gt; to run, probably the best way to identify the big drainers and check power usage statistics but what most interests us is its tunables section, which shows you if tweaks have been applied to optimize power usage and allows you to apply said tweaks.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have a Thinkpad laptop you'll also have to install these utilities for TLP&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install tp-smapi-dkms acpi-call-dkms&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="19" LastEditDate="2016-04-21T07:35:12.430" LastActivityDate="2016-04-21T07:35:12.430" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="1093" PostTypeId="2" ParentId="1086" CreationDate="2015-08-05T12:26:10.170" Score="12" Body="&lt;blockquote&gt;To zoom in Files you can use &lt;kbd&gt;Ctrl&lt;/kbd&gt; + the scroll wheel on your mouse.&#xA;— &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1087/227&quot;&gt;fuumind&lt;/a&gt;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you don't have a mousewheel you can also use &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;+&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;-&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(unfortunately not with number pad keys)&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-06T14:17:15.107" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1094" PostTypeId="2" ParentId="1090" CreationDate="2015-08-05T13:54:31.107" Score="9" Body="&lt;ul&gt;&#xA;&lt;li&gt;If you have a Hybrid graphics laptop you should install &lt;a href=&quot;http://bumblebee-project.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;bumblebee&lt;/a&gt;. Here is an &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28/installing-bumblebee-on-freya&quot;&gt;installation guide&lt;/a&gt; on Freya. &lt;/li&gt;&#xA;&lt;li&gt;Installing &lt;a href=&quot;https://01.org/linux-thermal-daemon/documentation/introduction-thermal-daemon&quot; rel=&quot;nofollow noreferrer&quot;&gt;thermald&lt;/a&gt; :&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The demand for high performance desktop/laptop systems has resulted in higher power dissipation. This problem is compounded by increased demand for small form factor systems. It is increasingly difficult to manage performance and thermal issues in isolation. Thermal issues are important to handle proactively without significantly impacting performance.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The solution used in this document is to develop a thermal daemon,&#xA;  which proactively controls thermal, using P-states, T-states, and the&#xA;  Intel power clamp driver.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Actually it monitors and controls the CPU temperature, resulting in reduced overheating. You can install it on elementary:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install thermald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install TLP as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1090/how-to-optimise-elementary-os-for-maximal-battery-life-time-on-laptops#1091&quot;&gt;John Guerreiro&lt;/a&gt; mentioned. But note that if you are using ThinkPad you require one additional step&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install tp-smapi-dkms acpi-call-dkms&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;full guide&lt;/a&gt; for installation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="47" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-05T13:54:31.107" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1096" PostTypeId="1" CreationDate="2015-08-05T14:53:26.197" Score="5" ViewCount="177" Body="&lt;p&gt;OK so I have my laptop connected to a TV and I'm running a dual boot with Windows 8.1 and elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I open the lid just enough for the power button to work, then I close the lid. Screen goes black, there is no sign of super GRUB, then elementary OS launches by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I unplug the TV and power on, I can see the super grub menu letting me choose which OS to boot on my laptop's display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I don't unplug and during the black screen, I move down twice and hit the Return key I can boot Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So super grub is working fine, its just not displaying on my screen. I don't want to be unplugging and plugging the TV every single time, and although blindly moving around the black screen works, I would like too see what I'm doing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this?&lt;/p&gt;&#xA;" OwnerUserId="768" LastEditorUserId="16827" LastEditDate="2019-01-09T09:53:59.317" LastActivityDate="2019-01-09T09:53:59.317" Title="Super GRUB is not displaying on my external monitor" Tags="|display|boot|grub|" AnswerCount="0" CommentCount="4" ClosedDate="2019-02-20T16:10:26.490" ContentLicense="CC BY-SA 4.0" />
  <row Id="1099" PostTypeId="1" AcceptedAnswerId="1168" CreationDate="2015-08-05T18:07:02.677" Score="2" ViewCount="302" Body="&lt;p&gt;I was following &lt;a href=&quot;http://www.elementarynow.com/graphic-drivers-for-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; link to install proprietary drivers for my AMD graphics card. As it says in the page, I downloaded the Catalyst Control Center from the AMD site and ran it. But the installer is missing any kind of text in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it shows the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(gksu:16410): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:16410): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:16410): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:16410): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:16410): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is a screen shot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/19DrJ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/19DrJ.jpg&quot; alt=&quot;screen shot&quot;&gt;&lt;/a&gt;]&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Update&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;After seeing r3bl's answer I ran &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gtk2-engines-pixbuf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which got rid of the theme engine errors. Also, I ran&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk-module&#xA;sudo apt-get install libcanberra-gtk-module:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which got rid of the canberra-gtk-module error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But still the Catalyst Control Center UI is not showing any kind of text on it.&lt;/p&gt;&#xA;" OwnerUserId="773" LastEditorUserId="773" LastEditDate="2015-08-06T05:28:43.297" LastActivityDate="2015-08-07T06:28:09.103" Title="AMD driver installer not showing any text" Tags="|graphic-drivers|proprietary|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1100" PostTypeId="2" ParentId="1099" CreationDate="2015-08-05T18:43:11.407" Score="1" Body="&lt;p&gt;I just checked AskUbuntu and found several different references that are pointing to this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gtk2-engines-pixbuf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, give it a try and let us know how it went!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;a href=&quot;https://askubuntu.com/questions/304737/how-to-resolve-unable-to-locate-theme-engine-type-error-in-android-sdk-manager&quot;&gt;source 1&lt;/a&gt;, &lt;a href=&quot;https://askubuntu.com/questions/106959/issues-with-quickly-tk-warning-unable-to-locate-theme-engine-in-module-path&quot;&gt;source 2&lt;/a&gt;, &lt;a href=&quot;https://askubuntu.com/questions/66356/gdk-gtk-warnings-and-errors-from-the-command-line&quot;&gt;source 3&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-05T18:43:11.407" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1101" PostTypeId="1" CreationDate="2015-08-05T19:05:14.530" Score="1" ViewCount="306" Body="&lt;p&gt;Well, as the title said, I am looking to learn and be a part of Linux. So I installed elementary OS with Windows 8 too, but my problem is, that when I turn on the computer, the system doesn't ask me which Operating System I want to use, it just starts Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody know how to fix it ? I would really appreciate any help.&lt;/p&gt;&#xA;" OwnerUserId="775" LastEditorUserId="3757" LastEditDate="2016-05-06T05:17:50.367" LastActivityDate="2016-05-06T05:17:50.367" Title="elementary OS and Windows 8 Installed, but I can´t choose wich to select" Tags="|release-freya|dual-boot|boot|" AnswerCount="1" CommentCount="0" ClosedDate="2015-08-06T04:36:41.000" ContentLicense="CC BY-SA 3.0" />
  <row Id="1102" PostTypeId="2" ParentId="1101" CreationDate="2015-08-05T19:51:34.977" Score="2" Body="&lt;p&gt;The next time you should install the OS's in reverse order:First install Windows then the Linux OS. Then you will have the grub menu when you start the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a similar question on askubuntu. I did not try it, but it sounds very promising:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/6317/how-can-i-install-windows-after-ive-installed-ubuntu&quot;&gt;https://askubuntu.com/questions/6317/how-can-i-install-windows-after-ive-installed-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is explained for Win7, but I think it will work for Win8 as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remember to disable fastboot on your Win8:&lt;a href=&quot;https://askubuntu.com/questions/452071/why-disable-fast-boot-on-windows-8-when-having-dual-booting&quot;&gt;https://askubuntu.com/questions/452071/why-disable-fast-boot-on-windows-8-when-having-dual-booting&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-05T19:51:34.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1103" PostTypeId="1" AcceptedAnswerId="1127" CreationDate="2015-08-05T19:58:49.103" Score="30" ViewCount="71635" Body="&lt;p&gt;For example, this is what LibreOffice Calc looks like right after installation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mBmEF.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mBmEF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Very Windows 95 looking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ho can I make it look more in line with the design of elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="6292" LastEditDate="2016-09-28T15:07:23.057" LastActivityDate="2020-10-19T16:48:13.763" Title="How can I make LibreOffice look better?" Tags="|themes|libreoffice|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1104" PostTypeId="2" ParentId="1103" CreationDate="2015-08-05T20:34:05.147" Score="4" Body="&lt;p&gt;To have a more appropriate look, you can install the Sifr icon theme :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice-style-sifr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After install, open Libreoffice and go to &lt;em&gt;Tools&lt;/em&gt; → &lt;em&gt;Options&lt;/em&gt; and select Sifr icons and small size.&lt;/p&gt;&#xA;&lt;p&gt;I hope you like it.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2020-10-19T16:48:13.763" LastActivityDate="2020-10-19T16:48:13.763" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="1105" PostTypeId="1" AcceptedAnswerId="1106" CreationDate="2015-08-05T21:24:38.697" Score="4" ViewCount="126" Body="&lt;p&gt;I'm working on a project that needs to have a &quot;Create Project&quot; wizard, the one I made doesn't-look-very-elementary. I found no information on wizards in elementary HIG, and I am not sure how to make it fit.&lt;/p&gt;&#xA;" OwnerUserId="675" LastActivityDate="2015-08-05T21:46:33.697" Title="How should I design a &quot;Create Project&quot; wizard?" Tags="|programming|design|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1106" PostTypeId="2" ParentId="1105" CreationDate="2015-08-05T21:46:33.697" Score="5" Body="&lt;p&gt;Check out &lt;a href=&quot;http://stef.thewalter.net/installer-anti-pattern.html&quot;&gt;The Wizard Anti-Pattern&lt;/a&gt; by Stef Walter. It's part of the &quot;See Also&quot; in the &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#design-philosophy&quot;&gt;Design Philosophy&lt;/a&gt; section of the HIG.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The TL;DR is to avoid wizards at all cost. Get as much info automatically as you can, make solid opinionated design/engineering decisions for most other things, and only ask for things that are really essential to ask about.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-05T21:46:33.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1107" PostTypeId="2" ParentId="1103" CreationDate="2015-08-05T22:57:03.547" Score="11" Body="&lt;p&gt;There are some style packages available:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libreoffice-style-crystal&#xA;libreoffice-style-galaxy&#xA;libreoffice-style-hicontrast&#xA;libreoffice-style-human&#xA;libreoffice-style-oxygen&#xA;libreoffice-style-sifr&#xA;libreoffice-style-tango&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and probably some more...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like and use the &quot;breeze-style&quot;:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xwj39.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xwj39.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I forgot to mention that I installed LibreOffice via PPA (&lt;a href=&quot;https://launchpad.net/~libreoffice/+archive/ubuntu/libreoffice-4-4&quot; rel=&quot;noreferrer&quot;&gt;https://launchpad.net/~libreoffice/+archive/ubuntu/libreoffice-4-4&lt;/a&gt;). Gabriel wrote that the &quot;crystal-package&quot; wants to remove other LibreOffice packages. To be sure here is a list of all my libreoffice* packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libreoffice&#xA;libreoffice-avmedia-backend-gstreamer&#xA;libreoffice-base&#xA;libreoffice-base-core&#xA;libreoffice-base-drivers&#xA;libreoffice-calc&#xA;libreoffice-common&#xA;libreoffice-core&#xA;libreoffice-draw&#xA;libreoffice-gnome&#xA;libreoffice-gtk&#xA;libreoffice-help-de&#xA;libreoffice-help-en-gb&#xA;libreoffice-help-en-us&#xA;libreoffice-impress&#xA;libreoffice-java-common&#xA;libreoffice-l10n-de&#xA;libreoffice-l10n-en-gb&#xA;libreoffice-l10n-en-us&#xA;libreoffice-math&#xA;libreoffice-pdfimport&#xA;libreoffice-report-builder-bin&#xA;libreoffice-sdbc-firebird&#xA;libreoffice-sdbc-hsqldb&#xA;libreoffice-style-breeze&#xA;libreoffice-style-crystal&#xA;libreoffice-style-galaxy&#xA;libreoffice-style-human&#xA;libreoffice-style-oxygen&#xA;libreoffice-style-sifr&#xA;libreoffice-writer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="107" LastEditorUserId="107" LastEditDate="2015-08-06T09:17:57.383" LastActivityDate="2015-08-06T09:17:57.383" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1108" PostTypeId="2" ParentId="1023" CreationDate="2015-08-06T00:24:24.293" Score="1" Body="&lt;p&gt;I upgraded my windows 8.1 to windows 10 and it did not affect my Elementary OS install. EFI boot remained intact. The only issue I had while upgrading windows was it would reboot to continue installing and boot into Elementary and I would have to reboot into windows to continue the upgrade.&lt;/p&gt;&#xA;" OwnerUserId="776" LastActivityDate="2015-08-06T00:24:24.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1109" PostTypeId="1" CreationDate="2015-08-06T01:49:53.157" Score="1" ViewCount="90" Body="&lt;p&gt;I can boot from the installation image into elementary OS Freya or Luna, but all window appear as a black boxes to me, I cannot see any content. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's dell laptop, Pentium 4 mobile. 2GB of RAM and AMD FX5200 Mobile GPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way (e.g. a boot option) to make graphics work on an installation stage?&lt;/p&gt;&#xA;" OwnerUserId="777" LastEditorUserId="386" LastEditDate="2015-08-06T07:20:45.490" LastActivityDate="2015-08-06T07:20:45.490" Title="FX5200 black windows" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1110" PostTypeId="1" AcceptedAnswerId="1158" CreationDate="2015-08-06T01:54:56.027" Score="2" ViewCount="165" Body="&lt;p&gt;I imagine this doesn't have a workable solution yet, but would like to know if anyone has tried: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Mac systems, there's an app for dual boot, from MacOS to boot to Windows on the next reboot, and from Windows there's also an app to next time boot back to MacOS. &#xA;Is there a way this can be done with GRUB/UEFI? &lt;/p&gt;&#xA;" OwnerUserId="370" LastActivityDate="2015-08-06T21:00:49.707" Title="GRUB: Is there a way to pre-determine which OS to boot to, before the reboot?" Tags="|dual-boot|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1111" PostTypeId="1" CreationDate="2015-08-06T02:19:01.107" Score="11" ViewCount="728" Body="&lt;p&gt;I'm having trouble installing elementary OS onto my Surface Pro 2. elementary OS works fine when in live mode - except that Wi-Fi doesn't work (driver issue, I guess?).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try a proper install, the resolution is much too low and most of the dialog is clipped off. Nevertheless, I have managed to &lt;kbd&gt;Tab&lt;/kbd&gt; and &lt;kbd&gt;arrow-key&lt;/kbd&gt; my way through to the install step. But at some point it crashes with some error related to &lt;code&gt;grub&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd really like to get elementary OS working on this machine. What can I try? And how can I gather better diagnostics to help get to the bottom of the problem?&lt;/p&gt;&#xA;" OwnerUserId="778" LastEditorUserId="190" LastEditDate="2015-08-15T20:30:56.770" LastActivityDate="2015-08-15T20:30:56.770" Title="Help installing on Surface Pro 2" Tags="|system-installation|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1112" PostTypeId="2" ParentId="1110" CreationDate="2015-08-06T03:57:05.483" Score="0" Body="&lt;p&gt;You can try the following post:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/485726/set-the-grub-default-os-dual-boot-windows-7-and-ubuntu-14-04&quot;&gt;https://askubuntu.com/questions/485726/set-the-grub-default-os-dual-boot-windows-7-and-ubuntu-14-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That worked for me. However as per description on &lt;a href=&quot;https://help.ubuntu.com/community/WindowsDualBoot&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/WindowsDualBoot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;This page describes how to set up your computer in order to dual boot Ubuntu and Windows. Warning /!\ While there are some benefits to dual-booting (e.g. better performance for a native install), it is not recommended. Instead, it is best to do a native install of Ubuntu, and then virtualize the other operating system.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I say so because then after I use dual boot and get frustrated to reboot my laptop every time I configure a host in linux and VirtualBox running Windows 7 and XP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps. &lt;/p&gt;&#xA;" OwnerUserId="779" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-06T03:57:05.483" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1113" PostTypeId="1" AcceptedAnswerId="1114" CreationDate="2015-08-06T04:32:30.107" Score="1" ViewCount="176" Body="&lt;p&gt;I have installed Luna alongside on my macBook. Now i want to play my iTunes music, but it seems that Luna can't support it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any codec package to support apple iTunes music files?&lt;/p&gt;&#xA;" OwnerUserId="780" LastEditorUserId="137" LastEditDate="2015-08-06T07:23:35.453" LastActivityDate="2015-08-06T07:23:35.453" Title="How to support iTunes on Luna?" Tags="|software-installation|codec|music|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1114" PostTypeId="2" ParentId="1113" CreationDate="2015-08-06T04:35:57.610" Score="4" Body="&lt;p&gt;First note that your music files must not be DRM protected then you need &lt;code&gt;libavcodec-extra-53&lt;/code&gt; codec.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can easily install it via terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libavcodec-extra-53&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="47" LastActivityDate="2015-08-06T04:35:57.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1115" PostTypeId="2" ParentId="1109" CreationDate="2015-08-06T06:04:34.747" Score="2" Body="&lt;p&gt;Hold down shift at boot, choose other options, &quot;nomodeset&quot; and then choose the &quot;install&quot; option!&lt;/p&gt;&#xA;" OwnerUserId="777" LastActivityDate="2015-08-06T06:04:34.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1116" PostTypeId="1" AcceptedAnswerId="1155" CreationDate="2015-08-06T06:13:11.013" Score="3" ViewCount="1243" Body="&lt;p&gt;I am a frequent user of the keyboard shortcut &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; to switch focus between windows. I use a Chrome extension called &lt;a href=&quot;https://chrome.google.com/webstore/detail/pure-pomodoro/hfilbmblidibnmifcabmolhlaekpfhak&quot; rel=&quot;nofollow&quot;&gt;Pure Pomodoro&lt;/a&gt;. This extension provides a simple timer window that automatically always stays on top of all other windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because of its nature of being a window that only provides a timer, I don't want this window to be included in the &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; switching windows behaviour. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thus is it possible to exclude specific windows from being considered in &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="34" LastEditDate="2015-08-06T07:30:21.837" LastActivityDate="2015-09-03T22:38:01.387" Title="How can I exclude specific windows from Alt+Tab switching?" Tags="|window-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1117" PostTypeId="5" CreationDate="2015-08-06T06:22:35.280" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-06T06:22:35.280" LastActivityDate="2015-08-06T06:22:35.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1118" PostTypeId="4" CreationDate="2015-08-06T06:22:35.280" Score="0" Body="Gala is a window &amp; compositing manager based on libmutter and designed by elementary for use with Pantheon Shell." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-06T07:23:04.200" LastActivityDate="2015-08-06T07:23:04.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1119" PostTypeId="5" CreationDate="2015-08-06T06:24:06.120" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-06T06:24:06.120" LastActivityDate="2015-08-06T06:24:06.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1120" PostTypeId="4" CreationDate="2015-08-06T06:24:06.120" Score="0" Body="Geary is a lightweight email program designed around conversations and built for the GNOME desktop. It's designed to let you read your email quickly and effortlessly. Its interface is based on conversations, so you can easily read an entire discussion without having to click from message to message." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-06T07:23:24.440" LastActivityDate="2015-08-06T07:23:24.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1121" PostTypeId="5" CreationDate="2015-08-06T06:24:47.380" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-06T06:24:47.380" LastActivityDate="2015-08-06T06:24:47.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1122" PostTypeId="4" CreationDate="2015-08-06T06:24:47.380" Score="0" Body="Questions related to the sudo command that allows users to run programs with the privileges of a different user (normally the root user)." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-06T07:23:42.383" LastActivityDate="2015-08-06T07:23:42.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1123" PostTypeId="5" CreationDate="2015-08-06T06:28:15.200" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-06T06:28:15.200" LastActivityDate="2015-08-06T06:28:15.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1124" PostTypeId="4" CreationDate="2015-08-06T06:28:15.200" Score="0" Body="Bash is the shell used in elementary OS command-line interface." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-06T07:23:19.677" LastActivityDate="2015-08-06T07:23:19.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1125" PostTypeId="5" CreationDate="2015-08-06T06:29:45.857" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-06T06:29:45.857" LastActivityDate="2015-08-06T06:29:45.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1126" PostTypeId="4" CreationDate="2015-08-06T06:29:45.857" Score="0" Body="Aptitude is a quite powerful package manager leveraging CLI and an ncurses-style interface." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-08-06T07:23:16.927" LastActivityDate="2015-08-06T07:23:16.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1127" PostTypeId="2" ParentId="1103" CreationDate="2015-08-06T08:06:11.117" Score="41" Body="&lt;p&gt;You’re missing the &lt;code&gt;libreoffice-gtk3&lt;/code&gt; package for integration with your GTK+ theme.&lt;/p&gt;&#xA;" OwnerUserId="784" LastEditorUserId="784" LastEditDate="2018-10-23T05:01:45.413" LastActivityDate="2018-10-23T05:01:45.413" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="1128" PostTypeId="1" AcceptedAnswerId="1133" CreationDate="2015-08-06T08:39:13.307" Score="7" ViewCount="16866" Body="&lt;p&gt;After having set-up multiple &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/735/how-do-i-change-the-keyboard-layout&quot;&gt;keyboard layouts&lt;/a&gt; how can I switch between them using a keyboard shortcut?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-03T19:48:34.413" Title="How can I switch between keyboard layouts with a keyboard shortcut in Freya?" Tags="|release-freya|keyboard|keyboard-shortcuts|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1129" PostTypeId="1" CreationDate="2015-08-06T08:44:26.417" Score="1" ViewCount="650" Body="&lt;p&gt;Has anyone being able to configure shared google calendar in Maya Calendar application?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried few things:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Add personal calendar (this only add my own calendar but not other that are shared in my account)&lt;/li&gt;&#xA;&lt;li&gt;Add shared calendar using the Calendar ID provided by Google (Not working). Authentication failure.&lt;/li&gt;&#xA;&lt;li&gt;Add following Caldav configuration. In Thunderbird with lightening we should use xml address. I tried with xml and http nothing worked. Always says Authentication denied.&lt;/li&gt;&#xA;&lt;li&gt;I have also configured the calendar as public for testing propose. Same thing.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have tried to see if it is a way to debug Maya Calendar application, but I haven't found any log files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="779" LastEditorUserId="129" LastEditDate="2015-08-06T10:18:22.517" LastActivityDate="2015-08-06T10:18:22.517" Title="Can't configure shared google calendar in Maya?" Tags="|calendar|settings|" AnswerCount="1" CommentCount="3" ClosedDate="2015-08-07T07:16:13.783" ContentLicense="CC BY-SA 3.0" />
  <row Id="1130" PostTypeId="2" ParentId="1128" CreationDate="2015-08-06T08:51:29.670" Score="0" Body="&lt;p&gt;&lt;code&gt;Alt + Space&lt;/code&gt;switches between your selected keyboard layouts&lt;/p&gt;&#xA;" OwnerUserId="19" LastActivityDate="2015-08-06T08:51:29.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1131" PostTypeId="2" ParentId="1129" CreationDate="2015-08-06T09:00:56.863" Score="1" Body="&lt;p&gt;This feature is not available in Maya at the moment. As per your first attempt, you can only sync the application with your main calendar connected to your Google account. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://answers.launchpad.net/maya/+question/265089&quot; rel=&quot;nofollow&quot;&gt;this answer in Maya's launchpad page&lt;/a&gt; for confirmation. I also see a possible workaround there, but personally I haven't tested it.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-08-06T09:00:56.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1132" PostTypeId="1" AcceptedAnswerId="1138" CreationDate="2015-08-06T09:39:54.767" Score="3" ViewCount="7777" Body="&lt;p&gt;I have a full hd screen, and my interface is too small. I can't find scaling in system settings. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="785" LastEditorUserId="34" LastEditDate="2015-08-06T13:22:22.923" LastActivityDate="2015-08-06T13:22:22.923" Title="Interface scaling in full hd" Tags="|settings|user-interface|high-dpi|" AnswerCount="1" CommentCount="0" ClosedDate="2015-08-06T20:30:58.470" ContentLicense="CC BY-SA 3.0" />
  <row Id="1133" PostTypeId="2" ParentId="1128" CreationDate="2015-08-06T10:08:59.853" Score="10" Body="&lt;p&gt;Default shortcut for switching layouts is &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you’d like to use a different shortcut, you can set one in System Settings -&gt; Keyboard -&gt; Shortcuts -&gt; Universal Access as “Next Keyboard Layout”.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/f1K4W.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/f1K4W.png&quot; alt=&quot;Keyboard shortcuts&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, it is not possible to select shortcut &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt; or &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do this through the terminal, but I strongly &lt;strong&gt;not recommend&lt;/strong&gt; doing so, because you may have problems with other system shortcuts. If you still dare:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;Shift_L', '&amp;lt;Alt&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Alt_L', '&amp;lt;Shift&amp;gt;Alt_R']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Ctrl&amp;gt;Shift_L', '&amp;lt;Ctrl&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Control_L', '&amp;lt;Shift&amp;gt;Control_R']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="5565" LastEditDate="2016-09-26T04:42:33.787" LastActivityDate="2016-09-26T04:42:33.787" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1134" PostTypeId="1" CreationDate="2015-08-06T10:42:23.010" Score="9" ViewCount="2250" Body="&lt;p&gt;I am new to elementary OS, what codec do I need to play MP4 videos from my storage off-line?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get this error message: &lt;code&gt;Oops! Audience kann diese Datei nicht wiedergeben! No URI set.&lt;/code&gt; (in English: &lt;code&gt;Oops! Audience can't play this file !&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="787" LastEditorUserId="179" LastEditDate="2015-08-06T20:41:38.823" LastActivityDate="2015-08-06T21:24:22.603" Title="What codec do I need to play MP4-Videos on my pc? (offline)" Tags="|codec|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1135" PostTypeId="1" CreationDate="2015-08-06T10:54:05.087" Score="3" ViewCount="4689" Body="&lt;p&gt;Having problems with NVIDIA GPU not detecting displays properly.&#xA;I have 1 external monitor, and a laptop screen&#xA;Using Elementary Freya 0.3 x64 and NVIDIA binary driver 355.06, everything is up to date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resolutions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;laptop: 1366x768&lt;/li&gt;&#xA;&lt;li&gt;monitor: 1360x768&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;both monitors support 60Hz refresh rate, but their refresh rates are much lower, I'm noticing some slight mouse pointer delay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xorg.conf ad xrand: &lt;a href=&quot;http://pastebin.com/BinwALwW&quot; rel=&quot;nofollow noreferrer&quot;&gt;xorg_xrandr_pastebin&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;X Server Display Configuration Layout is following:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xnrge.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xnrge.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -nn | grep '\[03'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;blockquote&gt;&#xA;  &lt;p&gt;00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;blockquote&gt;&#xA;  &lt;p&gt;01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF119M [GeForce GT 520M] [10de:1050] (rev a1)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Anyone has any idea what could be causing this, maybe faulty GPU or something ?&#xA;Integrated Intel is detecting everything properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried manually configuring xorg, but I can't seem to find any decent way to set up refresh rate, since all the command I've been able to dig up on google are using deprecated commands etc. so I'd appreciate if someone has an idea/way to manually configure the layout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="639" LastActivityDate="2016-09-01T17:31:32.343" Title="Nvidia GPU not detecting displays" Tags="|display|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1136" PostTypeId="2" ParentId="1134" CreationDate="2015-08-06T10:54:50.697" Score="12" Body="&lt;p&gt;You should install the package ubuntu-restricted-extras in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-08-06T10:54:50.697" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1138" PostTypeId="2" ParentId="1132" CreationDate="2015-08-06T11:25:53.490" Score="5" Body="&lt;p&gt;Scaling factors can be configured by &lt;code&gt;gsettings&lt;/code&gt; in terminal (seen in &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gtk+3.0/+bug/1282847&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 1&#xA;gsettings set org.gnome.desktop.interface text-scaling-factor 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can play around with the values.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-08-06T11:25:53.490" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1139" PostTypeId="1" CreationDate="2015-08-06T11:40:08.637" Score="1" ViewCount="426" Body="&lt;p&gt;After upgrading the graphics card, the system does not start properly. It boots to black screen without showing up the user interface. Please help me.&lt;/p&gt;&#xA;" OwnerUserId="789" LastEditorUserId="138" LastEditDate="2015-08-07T01:18:29.297" LastActivityDate="2015-09-07T18:30:45.050" Title="elementary OS boots into the command line interface" Tags="|release-freya|graphic-drivers|" AnswerCount="1" CommentCount="3" ClosedDate="2019-04-30T14:22:54.350" ContentLicense="CC BY-SA 3.0" />
  <row Id="1140" PostTypeId="1" CreationDate="2015-08-06T13:26:42.910" Score="3" ViewCount="73" Body="&lt;p&gt;When I first logged in to a home network drive, I entered the login and checked the box to &quot;remember forever&quot;. But it never remembers and instead requires me to enter login each time. Also, it requires logins for every subdirectory as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS 0.3 Freya (64-bit)&#xA;Intel Core i&amp;amp; @ 2.30 GHz x 8&lt;/p&gt;&#xA;" OwnerUserId="733" LastEditorUserId="26" LastEditDate="2015-09-03T10:35:56.407" LastActivityDate="2015-09-03T10:35:56.407" Title="Files/Entire Network won't &quot;remember forever&quot; my login" Tags="|release-freya|pantheon-files|networking|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-07T21:06:13.850" ContentLicense="CC BY-SA 3.0" />
  <row Id="1141" PostTypeId="1" CreationDate="2015-08-06T13:58:12.010" Score="1" ViewCount="2281" Body="&lt;p&gt;I am using elementary OS, but sometimes my system won't shutdown: it freezes with the elementary logo without powering off. What to do?&lt;/p&gt;&#xA;" OwnerUserId="790" LastEditorUserId="34" LastEditDate="2015-08-07T13:52:41.430" LastActivityDate="2016-04-25T02:01:05.127" Title="My system won't shutdown.... I have to press the power button to shutdown" Tags="|shutdown|" AnswerCount="1" CommentCount="1" ClosedDate="2015-08-17T17:18:00.107" ContentLicense="CC BY-SA 3.0" />
  <row Id="1142" PostTypeId="1" CreationDate="2015-08-06T14:04:22.437" Score="5" ViewCount="4294" Body="&lt;p&gt;I've recently installed &lt;strong&gt;elementary OS Freya&lt;/strong&gt; 0.3 on an laptop, but it doesn't run as smooth as on my desktop PC. It's sluggish while opening windows and especially switching pages in the application menu. I think that it could be a problem related to &lt;strong&gt;drivers&lt;/strong&gt;, so I've &lt;strong&gt;tried installing ATI drivers&lt;/strong&gt; from the software center and even from the AMD website, but at the next reboot there is only a black screen. I've &lt;strong&gt;done all software updates&lt;/strong&gt; and also &lt;strong&gt;tried installing the 3.19 kernel&lt;/strong&gt;, but it boots to a black screen again. How can I solve this? Is there any compatible driver?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(CPU is an &lt;strong&gt;AMD APU A-micro 6400 T&lt;/strong&gt; quad-core)&lt;/p&gt;&#xA;" OwnerUserId="772" LastEditorUserId="84" LastEditDate="2015-08-06T20:07:06.453" LastActivityDate="2016-10-09T01:51:58.807" Title="How to install correct AMD drivers?" Tags="|release-freya|graphic-drivers|system|kernel|updates|" AnswerCount="3" CommentCount="4" ClosedDate="2016-10-21T20:56:28.963" ContentLicense="CC BY-SA 3.0" />
  <row Id="1143" PostTypeId="2" ParentId="1141" CreationDate="2015-08-06T14:44:20.663" Score="1" Body="&lt;p&gt;Edit the file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And modify the line :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It to obtain this line :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;acpi=noirq acpi=force apm=power_off quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, save, close, and back in the terminal, execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, when you will Shutdown, it should work.&lt;/p&gt;&#xA;" OwnerUserId="523" LastEditorUserId="3757" LastEditDate="2016-04-25T02:01:05.127" LastActivityDate="2016-04-25T02:01:05.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1144" PostTypeId="1" CreationDate="2015-08-06T15:24:20.583" Score="16" ViewCount="11506" Body="&lt;p&gt;How can I safely clean the system from unnecessary files to free up disk space? I mean unnecessary packages, configs, cache, etc.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2018-10-05T18:34:28.733" Title="How can I clean the system from unnecessary files?" Tags="|system|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1145" PostTypeId="1" CreationDate="2015-08-06T15:30:19.663" Score="9" ViewCount="6711" Body="&lt;p&gt;How can I synchronize over the air my Android smartphone and laptop? I'm interested in file sharing, notifications from phone, if it possible.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2018-08-21T18:35:16.927" Title="Ways to synchronize Android smartphone" Tags="|android|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1146" PostTypeId="2" ParentId="1144" CreationDate="2015-08-06T15:52:06.683" Score="17" Body="&lt;p&gt;Remove packages that were automatically&#xA;installed to satisfy dependencies for some package and that are no&#xA;more needed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Clear out the local repository of retrieved package files:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remove all files associated with removed packages (if you don’t have aptitude installed do &lt;code&gt;sudo apt-get install aptitude&lt;/code&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo aptitude purge ~c&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remove old kernel versions (thank @waldyrious for &lt;a href=&quot;https://elementaryos.stackexchange.com/a/117&quot;&gt;this answer&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge $( dpkg --list | grep -P -o &quot;linux-(headers|image)-\d\S+&quot; | grep -v $(uname -r | grep -P -o &quot;.+\d&quot;) )&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Clear the thumbnail cache:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -v -f ~/.cache/thumbnails/*/*.png ~/.thumbnails/*/*.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="675" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-06T20:26:36.197" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1147" PostTypeId="1" CreationDate="2015-08-06T17:05:56.723" Score="5" ViewCount="963" Body="&lt;p&gt;What can I do to just keep my elementary OS Freya running smoothly and not freeze, not break (requiring new install and losing data and installed software)?  It has been frustrating to say the least, several reinstalls. I want to know what might be a simple question: how to keep the install well oiled and not jamming (freezing) up, not breaking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example I mistakenly used synaptic to change display managers as I wanted to change the Greeter. I changed the video driver to binary Nvidia (proprietary) because Lightworks demanded that-- yup, my mouse moved at a crawl, had to reinstall. What I am saying is, should I just not change the graphics card driver, not change the Greeter, not change any wifi driver, not change the desktop manager (Pantheon)? Should I NOT install any updates once it is running, I mean I want to do whatever it takes to just have a working system for a few months, so frustrating doing reinstalls of the OS, then software, then data.  All I need elementary OS to do is: Firefox, email, text editor, music player, MEGA cloud storage sync, LibreOffice, and Fade In Pro screen-writing software-- and I have all that working now. Plus I have the login Greeter wallpaper and desktop wallpaper I like. So what to do now so nothing breaks, Linux runs smooth and I can just be productive? At this point I am concerned about doing any software or even security updates, I don't want anything to disturb working installation. Thoughts, advice?&lt;/p&gt;&#xA;" OwnerUserId="791" LastEditorUserId="26" LastEditDate="2015-08-06T20:32:23.743" LastActivityDate="2015-08-06T20:38:55.187" Title="Stable 'use and forget' elementary OS install: how?" Tags="|release-freya|software-installation|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1148" PostTypeId="2" ParentId="1023" CreationDate="2015-08-06T17:25:50.137" Score="0" Body="&lt;p&gt;I had the same (positive!) experience as other folks here. The Windows 8.1 -&gt; 10 upgrade went perfectly for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had grub set up to boot into Windows automatically after a few seconds, which allowed the whole thing to run unattended. For more info on how to do that, see &lt;a href=&quot;https://askubuntu.com/questions/52963/how-do-i-set-windows-to-boot-as-the-default-in-the-boot-loader/52990#52990&quot;&gt;this answer on Ask Ubuntu&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-06T17:25:50.137" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1149" PostTypeId="1" AcceptedAnswerId="1152" CreationDate="2015-08-06T17:48:04.580" Score="36" ViewCount="40230" Body="&lt;p&gt;No more to it, I can't seem to find any kind of Options or properties in the Terminal app. Is there a way to change the default font?&lt;/p&gt;&#xA;" OwnerUserId="793" LastEditorUserId="2708" LastEditDate="2016-01-05T03:24:32.143" LastActivityDate="2020-05-10T18:45:12.820" Title="How can I change the default Terminal font?" Tags="|pantheon-terminal|themes|fonts|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1150" PostTypeId="1" AcceptedAnswerId="1163" CreationDate="2015-08-06T17:50:28.263" Score="9" ViewCount="685" Body="&lt;p&gt;In the next week I will get a SSD for my notebook at work. This will be my first SSD and it will have a capacity of 256GB (maybe even ~500GB). At the moment I have a 1TB HDD and ~300GB in use. I will be able to use this HDD additional to the new SSD (Lenovo ultrabay) - so storage problems can be avoided, if I only get the small SSD...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have some virtual machines installed (but not more than two are running in the same time). I also started working with docker and created some images and containers. I hope I can replace all my vm's with docker containers in the future.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And now to my question: How would you partition the new SSD? Does it make sense to keep the home partition on HDD and the system stuff on the SSD? Of course I want to take as much speed advantages as possible. Does anyone have experiences in similar scenarios (docker, VMware)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does it make sense using LVM with mixed devices (SSD + HDD)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to consider anything special when replacing a HDD with a SDD?&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="190" LastEditDate="2015-08-06T19:54:02.697" LastActivityDate="2015-08-06T22:16:49.440" Title="Partitions on a SSD + HDD setup" Tags="|storage|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1151" PostTypeId="2" ParentId="1147" CreationDate="2015-08-06T17:57:15.540" Score="8" Body="&lt;p&gt;elementary is meant to be stable. Only to those who want it stable. You have complete freedom to have your OS work like you want it to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just forget about doing the maintenance yourself, and touching the command line to install any software or tweak your system if you want stability. But it does provide a security risk, therefore just simply update system once in a while with the default software updater. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You also took the risk yourself. Got your hands under the hood and hence dirty, therefore before trying anything new, DO research about the topic. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the world of Linux, there is no pain no Gain. Even I deleted my whole Ubuntu partition the previous year and had the rigorous experience of fixing it up. So, If you Indulge in the &lt;strong&gt;Not so simple part&lt;/strong&gt; of the Linux environment, You do need to take risks, but in the end you do get a immense experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the choice is absolutely yours. Don't look for new features, install security updates frequently, don't mess up the system settings and have a beautiful stable system running. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do the opposite and have a bleeding edge cool, and crashing distro, with a rich experience about Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do feel that if you like stability you can try Debian.&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="26" LastEditDate="2015-08-06T20:29:26.393" LastActivityDate="2015-08-06T20:29:26.393" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1152" PostTypeId="2" ParentId="1149" CreationDate="2015-08-06T18:04:19.247" Score="37" Body="&lt;p&gt;To change font in the Terminal you need &lt;code&gt;dconf-editor&lt;/code&gt;. Install it, if you haven't done so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run it and go to path &lt;code&gt;org&lt;/code&gt; &gt; &lt;code&gt;gnome&lt;/code&gt; &gt; &lt;code&gt;desktop&lt;/code&gt; &gt; &lt;code&gt;interface&lt;/code&gt; &gt; &lt;code&gt;monospace-font-name&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/imvgE.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/imvgE.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter name of desired font and font size. For example &lt;code&gt;Anonymous Pro 11&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1153&quot;&gt;use the command in Terminal&lt;/a&gt; instead of the &lt;code&gt;dconf-editor&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-06T18:39:54.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1153" PostTypeId="2" ParentId="1149" CreationDate="2015-08-06T18:29:07.833" Score="31" Body="&lt;p&gt;To change the font of &lt;em&gt;just&lt;/em&gt; the terminal (pantheon-terminal), you can use the &lt;code&gt;dconf-editor&lt;/code&gt; (requires an install) or the &lt;code&gt;gsettings&lt;/code&gt; command. Edit the &lt;code&gt;font&lt;/code&gt; property in the &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt; schema. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set org.pantheon.terminal.settings font 'FreeMono 10'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will have to close and reopen the terminal for the changes to take effect.&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-08-06T18:29:07.833" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1155" PostTypeId="2" ParentId="1116" CreationDate="2015-08-06T20:16:35.273" Score="8" Body="&lt;p&gt;I don't think this is possible, and I also don't think it will be a feature that will be implemented in the future. As you may be aware, elementary OS will always try to have the least amount of settings possible to keep the interface simple and clean, so supporting something that only a few will understand and actually use vs confusing or cluttering the interface for the rest isn't going to happen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regarding your case, have you tried &lt;a href=&quot;https://quassy.github.io/elementary-apps/Tomato/&quot; rel=&quot;nofollow&quot;&gt;Tomato&lt;/a&gt;?, it's an app to do what you want and was designed specifically for elemenary OS, currently it has the same problem of appearing when using &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;, but maybe the developer could add a setting for this to happen (he actually has a &lt;a href=&quot;https://blueprints.launchpad.net/tomatoapp&quot; rel=&quot;nofollow&quot;&gt;blueprint&lt;/a&gt; about adding a new preferences dialog for it, you can suggest the idea to him there). I think the chance of getting this setting on the application is much higher than the ones of elementary OS supporting the feature you want.&lt;/p&gt;&#xA;" OwnerUserId="146" LastEditorUserId="34" LastEditDate="2015-09-03T22:38:01.387" LastActivityDate="2015-09-03T22:38:01.387" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1156" PostTypeId="2" ParentId="1145" CreationDate="2015-08-06T20:20:16.277" Score="5" Body="&lt;p&gt;For these purposes, the most suitable &lt;a href=&quot;https://community.kde.org/KDEConnect&quot; rel=&quot;noreferrer&quot;&gt;KDE Connect&lt;/a&gt; in combination with &lt;a href=&quot;https://github.com/vikoadi/indicator-kdeconnect&quot; rel=&quot;noreferrer&quot;&gt;KDE Connect Indicator&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;KDE Connect is a project that aims to communicate all your devices. For example, with KDE Connect you can receive your phone notifications on your computer, or just use your phone as a remote control for your desktop. To achieve this, KDE Connect implements a secure communication protocol over the network, and allows any developer to create plugins on top of it. Currently there are KDE Connect clients on KDE, Android and Blackberry, and soon we will support iPhone as well.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Features:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;display notifications from your Android device on your desktop (requires Android 4.3+);&lt;/li&gt;&#xA;&lt;li&gt;send files from your Android device to your desktop and the other way around &quot;without wires&quot;;&lt;/li&gt;&#xA;&lt;li&gt;touchpad emulation: use your phone screen as your computer's touchpad (keyboard emulation is also available);&lt;/li&gt;&#xA;&lt;li&gt;shared clipboard between your phone and computer;&lt;/li&gt;&#xA;&lt;li&gt;display your phone's battery status on the desktop;&lt;/li&gt;&#xA;&lt;li&gt;multimedia remote control: use your Android device to control various Linux media players;&lt;/li&gt;&#xA;&lt;li&gt;RSA Encryption.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Install (carefully, a lot dependencies of KDE):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:vikoadi/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install indicator-kdeconnect kdeconnect --no-install-recommends&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you need to install the application on your phone from &lt;a href=&quot;https://play.google.com/store/apps/details?id=org.kde.kdeconnect_tp&quot; rel=&quot;noreferrer&quot;&gt;Google Play&lt;/a&gt; or &lt;a href=&quot;https://f-droid.org/app/org.kde.kdeconnect_tp&quot; rel=&quot;noreferrer&quot;&gt;F-Droid&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After run &lt;strong&gt;KDE Connect Indicator&lt;/strong&gt; from laucnher and follow the instructions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rROhv.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rROhv.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.webupd8.org/2014/11/kde-connect-indicator-use-kde-connect.html&quot; rel=&quot;noreferrer&quot;&gt;Source&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-08-06T20:20:16.277" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1157" PostTypeId="2" ParentId="1147" CreationDate="2015-08-06T20:38:55.187" Score="6" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Don't&lt;/strong&gt; try to change display managers, desktop managers, or greeters. They're an intrinsic part of your system, you would be better off picking an OS that uses the one you want.&lt;/li&gt;&#xA;&lt;li&gt;Drivers for Video or WiFi can obvusly break those things if selected wrong. &lt;strong&gt;Do plenty of research&lt;/strong&gt;, and have a backup you can roll back to.&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Do&lt;/strong&gt; install updates.&lt;/li&gt;&#xA;&lt;li&gt;Change your wallpaper in the settings, and if you want your login to match (if it doesn't already) then use the steps &lt;a href=&quot;https://elementaryos.stackexchange.com/a/120/26&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;On a more personal note, don't trust MEGA. Consider hosting a solution with a more reputable company, or self-hosting it.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-06T20:38:55.187" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1158" PostTypeId="2" ParentId="1110" CreationDate="2015-08-06T21:00:49.707" Score="1" Body="&lt;p&gt;I think you are looking for the &lt;code&gt;grub-reboot&lt;/code&gt; command, it sets to which operating system it will reboot the next time. Someone asked a similar question &lt;a href=&quot;https://unix.stackexchange.com/questions/43196/how-can-i-tell-grub-i-want-to-reboot-into-windows-before-i-reboot&quot;&gt;here&lt;/a&gt; and it seems you have to configure some stuff for this to work correctly. After you do this you just type &lt;code&gt;grub-reboot &amp;lt;entry&amp;gt;&lt;/code&gt;, if you press &lt;kbd&gt;tab&lt;/kbd&gt; before typing the entry and it will show you the list of entries on GRUB.&lt;/p&gt;&#xA;" OwnerUserId="146" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2015-08-06T21:00:49.707" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1160" PostTypeId="1" CreationDate="2015-08-06T21:25:35.783" Score="10" ViewCount="43154" Body="&lt;p&gt;I have a 2007 core-duo laptop and wanted to know the system requirements for this OS. What are the minimum requirements.&lt;/p&gt;&#xA;" OwnerUserId="796" LastEditorUserId="45" LastEditDate="2015-09-30T19:15:07.797" LastActivityDate="2019-12-12T18:41:01.013" Title="What are the minimum hardware requirements to run elementary OS?" Tags="|system-installation|hardware|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1161" PostTypeId="2" ParentId="1160" CreationDate="2015-08-06T21:31:10.360" Score="10" Body="&lt;h2&gt;Recommended System Specifications&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Learn more at&#xA;&lt;a href=&quot;http://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://elementary.io/en/docs/installation#recommended-system-specifications&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="16827" LastEditDate="2019-12-12T18:41:01.013" LastActivityDate="2019-12-12T18:41:01.013" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="1163" PostTypeId="2" ParentId="1150" CreationDate="2015-08-06T22:16:49.440" Score="7" Body="&lt;p&gt;In my laptop installed &lt;strong&gt;128GB SSD&lt;/strong&gt; and &lt;strong&gt;500GB HDD&lt;/strong&gt; and I have &lt;code&gt;/&lt;/code&gt;,  &lt;code&gt;/home&lt;/code&gt; and &lt;code&gt;swap&lt;/code&gt; on &lt;strong&gt;SSD&lt;/strong&gt;, and store other files on &lt;strong&gt;HDD&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SSD:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/&lt;/code&gt; – 20GB;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/home&lt;/code&gt; – 100GB;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;swap&lt;/code&gt; – 8GB.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;HDD:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;All 500GB on &lt;code&gt;/media/storage&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;On the &lt;strong&gt;HDD&lt;/strong&gt; I keep only large files that don't need high-speed read/write. It's a music, videos, ISO images, system snapshots, etc. For convenience, in my home directory located symlinks to folders in the storage. They look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s media/storage/Videos ~/Videos&#xA;ln -s media/storage/Music ~/Music&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So my laptop works quickly thanks to the system and by user configs on the &lt;strong&gt;SSD&lt;/strong&gt;, but large files don't take up space on it and stored on the &lt;strong&gt;HDD&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope my experience will be useful to you.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-08-06T22:16:49.440" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1164" PostTypeId="1" CreationDate="2015-08-06T23:18:09.813" Score="0" ViewCount="354" Body="&lt;p&gt;I updated Freya using system updates today and all was going well until I walked away from my PC for 20 minutes to make dinner and came back to see a black screen with 'This Session is Locked. You'll be directed to the unlock dialog automatically in a few seconds'  Except that the unlock dialog never appeared not even after ten minutes. I had to shut off the PC and power back up into elementary OS Freya. what is going on?&lt;/p&gt;&#xA;" OwnerUserId="791" LastEditorUserId="3757" LastEditDate="2016-03-14T14:53:16.927" LastActivityDate="2016-03-14T14:53:16.927" Title="Help! : 'This Session is Locked. You'll be directed to the unlock dialog automatically in a few seconds'" Tags="|release-freya|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-07T07:48:37.177" ContentLicense="CC BY-SA 3.0" />
  <row Id="1165" PostTypeId="1" CreationDate="2015-08-06T23:22:36.890" Score="11" ViewCount="787" Body="&lt;p&gt;I had a sound problem after switching volume from internal speakers to HDMI output, so I reset PulseAudio. After which the volume control on the top of the desktop bar (Wingpanel) disappeared. I have tried many ways to restore it though nothing helped. How can I restore the volume indicator?&lt;/p&gt;&#xA;" OwnerUserId="798" LastEditorUserId="45" LastEditDate="2015-08-07T03:52:15.163" LastActivityDate="2015-08-07T03:52:15.163" Title="Volume icon not showing in Wingpanel" Tags="|release-freya|wingpanel|indicator-sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1166" PostTypeId="2" ParentId="1165" CreationDate="2015-08-07T00:07:00.370" Score="15" Body="&lt;p&gt;Enter the following in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install indicator-sound&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out then back in.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-07T00:07:00.370" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1167" PostTypeId="1" CreationDate="2015-08-07T05:52:35.103" Score="2" ViewCount="399" Body="&lt;p&gt;I paid and no download happened - how can I fix this? I followed the basic capture routine of Open OS that you can't download without a Credit Card.&lt;/p&gt;&#xA;" OwnerUserId="803" LastEditorUserId="242" LastEditDate="2015-08-07T20:54:08.507" LastActivityDate="2017-05-10T22:50:27.893" Title="I Paid but No Download :/" Tags="|elementary-website|download|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1168" PostTypeId="2" ParentId="1099" CreationDate="2015-08-07T06:28:09.103" Score="3" Body="&lt;p&gt;After a little help from my friend I fixed this by:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Going to System Settings -&gt; Languages &amp;amp; Region&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;And clicking on a popup there saying &quot;The language pack isn't fully installed&quot; or something similar, and installed it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then I applied it to login screen and all users using the button on the bottom of the screen.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart the system.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="773" LastActivityDate="2015-08-07T06:28:09.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1169" PostTypeId="1" AcceptedAnswerId="1172" CreationDate="2015-08-07T06:50:31.553" Score="16" ViewCount="7279" Body="&lt;p&gt;A nice feature of Ubuntu is the Wallpaper changer which can be configured in &quot;Appearance&quot; settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gXDry.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gXDry.png&quot; alt=&quot;Ubuntu&amp;#39;s appearance settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a possibility to do that with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-10-02T15:38:18.497" Title="How to automatically change wallpaper?" Tags="|wallpaper|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1170" PostTypeId="2" ParentId="1135" CreationDate="2015-08-07T06:52:41.767" Score="1" Body="&lt;p&gt;This message in the picture :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X Screen 0 (No Scanout)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;makes me think that xorg is not detecting your monitor vendor.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Connect the monitor to the laptop, start it and login. Try the buttons on the monitor,  enter in the OSD menu, go to SETUP &gt; Reset. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, go to Configuration &gt; Displays in your desktop. Monitor will go to blank for one second and you will see the correct resolution and your monitor vendor.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-08-07T06:52:41.767" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="1171" PostTypeId="2" ParentId="1169" CreationDate="2015-08-07T07:10:24.917" Score="7" Body="&lt;p&gt;I don't think that's possible with onboard tools.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there are several 3rd party applications delivering this feature.&lt;br&gt;&#xA;You can use &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/wallch/&quot; rel=&quot;nofollow&quot;&gt;Wallch&lt;/a&gt; for that. You can install it via Software Center.&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="242" LastEditDate="2015-08-07T21:09:33.567" LastActivityDate="2015-08-07T21:09:33.567" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1172" PostTypeId="2" ParentId="1169" CreationDate="2015-08-07T07:37:54.317" Score="21" Body="&lt;p&gt;Another great tool for this is &lt;a href=&quot;https://launchpad.net/variety&quot;&gt;Variety&lt;/a&gt;&#xA;I downloads wallpapers filtered by keyboards unto your computer and changes them in over time. It works great with elementary OS, though you have to adjust the settings to allow Variety to set the greeter wallpaper. Still, it's a third-party ppa so use at your own risk.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:peterlevi/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install variety&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-08-07T07:37:54.317" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1173" PostTypeId="2" ParentId="1145" CreationDate="2015-08-07T09:21:05.973" Score="2" Body="&lt;p&gt;You also use Pushbullet to a good sync of all your Android gadgets and Linux desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find more information about it at&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.pushbullet.com&quot; rel=&quot;nofollow&quot;&gt;Pushbullet site&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS, you must install Pushbullet-indicator with the following commands :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:atareao/atareao&#xA;&#xA;sudo apt-get update &#xA;&#xA;sudo apt-get install pushbullet-indicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before run it, you must install Pushbullet app for Android and sign in with your Google account:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://play.google.com/store/apps/detailshttps://play.google.com/store/apps/details?id=com.pushbullet.android&quot; rel=&quot;nofollow&quot;&gt;Pushbullet app&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="3757" LastEditDate="2016-05-05T13:34:56.317" LastActivityDate="2016-05-05T13:34:56.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1174" PostTypeId="2" ParentId="783" CreationDate="2015-08-07T10:48:34.180" Score="2" Body="&lt;p&gt;You can try to install elementary OS on Chromebook one of the following methods:&lt;/p&gt;&#xA;&lt;h3&gt;ChromeeOS - elementary OS Luna installation script for Chromebooks&lt;/h3&gt;&#xA;&lt;p&gt;ChromeeOS will install elementary OS (with ChrUbuntu) and apply automatically all the necessary fixes to run elementary OS on Chromebooks. You will be able to boot in ChromeOS or elementary OS on your Chromebook.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Setsuna666/elementaryos-chromebook&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub link&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;h3&gt;HugeGreenBug's elementary OS Freya for Haswell Chromebooks/Chromeboxes&lt;/h3&gt;&#xA;&lt;p&gt;This is ready ISO to install elementary OS Freya on Chromebooks/Chromeboxes.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.distroshare.com/distros/get/42/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Distroshare link&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-07T10:48:34.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1177" PostTypeId="1" AcceptedAnswerId="1178" CreationDate="2015-08-07T14:13:18.067" Score="12" ViewCount="16702" Body="&lt;p&gt;Is there an easy way to install &lt;a href=&quot;http://en.wikipedia.org/wiki/Sublime_Text&quot;&gt;Sublime Text&lt;/a&gt; 3 using &lt;code&gt;apt-get&lt;/code&gt; on elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="780" LastEditorUserId="45" LastEditDate="2015-08-07T20:40:23.690" LastActivityDate="2015-08-07T20:40:23.690" Title="How to install Sublime Text 3 on elementary OS?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1178" PostTypeId="2" ParentId="1177" CreationDate="2015-08-07T14:14:56.310" Score="24" Body="&lt;p&gt;There isn’t an official PPA, but you can use webupd8's PPA. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just try this on your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/sublime-text-3&#xA;sudo apt-get update&#xA;sudo apt-get install sublime-text-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also you can download the &lt;code&gt;.deb&lt;/code&gt; file from &lt;a href=&quot;http://www.sublimetext.com/3&quot;&gt;http://www.sublimetext.com/3&lt;/a&gt; and install it.&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="47" LastEditDate="2015-08-07T14:31:02.713" LastActivityDate="2015-08-07T14:31:02.713" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1179" PostTypeId="1" CreationDate="2015-08-07T14:16:29.080" Score="1" ViewCount="183" Body="&lt;p&gt;Since yesterday, a couple of web apps I regularly use (namely Popocorn Time and Whatsapp for Web) have stopped working. Here's the error message I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; [3101:0807/160625:ERROR:browser_main_loop.cc(170)] Running without the SUID sandbox! See https://code.google.com/p/chromium/wiki/LinuxSUIDSandboxDevelopment for more information on developing with the sandbox on.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any idea on how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-08-07T14:16:29.080" Title="Problems with Chromium sandbox" Tags="|chromium|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1180" PostTypeId="2" ParentId="1167" CreationDate="2015-08-07T14:24:21.660" Score="11" Body="&lt;p&gt;You are of course &lt;em&gt;not&lt;/em&gt; required to pay. If you did the devs will surely appreciate it though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your question gives almost no details on what problem you are facing. If you did not see the window with the links to download the torrent files, you can just go to &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io&lt;/a&gt;, enter $0 and click the &quot;Download&quot; button.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2017-05-10T22:50:27.893" LastActivityDate="2017-05-10T22:50:27.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1181" PostTypeId="1" CreationDate="2015-08-07T15:39:37.530" Score="1" ViewCount="749" Body="&lt;p&gt;I installed elementary OS today and found that in some applications the menus are not shown when clicked. It is not like I see the menu but not the text of the items, but rather that if I click on an item in the menubar, it is marked but the corresponding menu does not open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I have that problem in lyx, vlc, yakuake and dolphin. Other applications like google-chrome or software-center work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me with this?&lt;/p&gt;&#xA;" OwnerUserId="805" LastEditorUserId="84" LastEditDate="2015-08-07T16:12:04.567" LastActivityDate="2015-08-07T17:12:44.103" Title="Application menus are not showing" Tags="|menu|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-07T18:05:16.300" ContentLicense="CC BY-SA 3.0" />
  <row Id="1185" PostTypeId="2" ParentId="1045" CreationDate="2015-08-08T01:29:16.990" Score="4" Body="&lt;p&gt;If you've installed Midori from the Software Center (or otherwise from the upstream Ubuntu repositories), you're running Midori 0.4.3. You can verify this by accessing the &quot;About&quot; dialog at the bottom of the gear menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Midori that we build with Granite enabled is version 0.5.10. There's been a lot of work done in Midori regarding bookmarks between these versions. If you want the latest Midori without Granite (The one that is compatible with your bookmarks), you'll need to get it from the Midori PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add the Midori PPA and install Midori from it by entering the following in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:midori/ppa&#xA;sudo apt update&#xA;sudo apt install midori&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-08-08T16:17:30.553" LastActivityDate="2015-08-08T16:17:30.553" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1186" PostTypeId="1" AcceptedAnswerId="1325" CreationDate="2015-08-08T07:13:24.523" Score="3" ViewCount="123" Body="&lt;p&gt;As Daniel Foré announced in &lt;a href=&quot;https://plus.google.com/+DanielFor%C3%A9/posts/GxYMpM5CiyA&quot; rel=&quot;nofollow&quot;&gt;this post on Google+&lt;/a&gt;, a new 'Recent' view has been added to Files, at least in the daily ppa, but though I do run daily on my system, this update never showed up for me. How can I troubleshoot this issue?&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="26" LastEditDate="2015-09-03T10:31:40.677" LastActivityDate="2015-09-03T10:31:40.677" Title="How can I test the new 'recent' feature in Files?" Tags="|pantheon-files|testing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1187" PostTypeId="2" ParentId="830" CreationDate="2015-08-08T08:27:36.027" Score="2" Body="&lt;p&gt;The &lt;kbd&gt;F9&lt;/kbd&gt; key will hide/show the sidebar as well.&lt;/p&gt;&#xA;" OwnerUserId="762" LastActivityDate="2015-08-08T08:27:36.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1188" PostTypeId="1" AcceptedAnswerId="1189" CreationDate="2015-08-08T14:36:50.037" Score="8" ViewCount="1939" Body="&lt;p&gt;Is there any way to install microsoft fonts (Arial,Times New Roman...) using &lt;code&gt;apt-get&lt;/code&gt; on Freya?&lt;/p&gt;&#xA;" OwnerUserId="813" LastActivityDate="2015-08-09T01:06:50.270" Title="How to install Microsoft font on Freya?" Tags="|software-installation|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1189" PostTypeId="2" ParentId="1188" CreationDate="2015-08-08T14:39:27.757" Score="16" Body="&lt;p&gt;Just try this on your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ttf-mscorefonts-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="47" LastActivityDate="2015-08-08T14:39:27.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1190" PostTypeId="2" ParentId="1139" CreationDate="2015-08-08T18:01:29.727" Score="-2" Body="&lt;p&gt;I had the same problem after having installed bad drivers for my graphic card, so in my opinion it's a problem related to some &lt;strong&gt;not working open source driver&lt;/strong&gt; that are being installed by elementary. You can try downloading the correct drivers from your graphic card's producer's website and &lt;strong&gt;install them manually&lt;/strong&gt; from the command line interface, this should solve the problem.&#xA;In my case I had to reinstall the system, if you have nothing to lose, also try to &lt;strong&gt;install elementary again&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="772" LastActivityDate="2015-08-08T18:01:29.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1193" PostTypeId="1" AcceptedAnswerId="1469" CreationDate="2015-08-08T19:07:23.323" Score="5" ViewCount="1482" Body="&lt;p&gt;When I switched to elementary OS last week I noticed my battery indicator stops at 90%.  How can I fix this?  How do I know if this is an &#xA;elementary issue or other distributions too? Because even guests in VBox display 100%.&lt;/p&gt;&#xA;" OwnerUserId="59" LastEditorUserId="817" LastEditDate="2015-08-08T20:49:06.973" LastActivityDate="2015-10-29T15:02:12.560" Title="Battery Percentage (%) Indicator on menu bar does not show 100% when fully charged" Tags="|menu|battery|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1194" PostTypeId="1" AcceptedAnswerId="4442" CreationDate="2015-08-08T19:50:43.357" Score="8" ViewCount="2616" Body="&lt;p&gt;I installed Freya recently and shortly thereafter the clock disappeared.&lt;br&gt;&#xA;Sometimes I can access the calendar pop-up by randomly clicking around where the clock used to be, but this doesn't always work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="816" LastEditorUserId="242" LastEditDate="2015-08-18T22:03:27.527" LastActivityDate="2018-08-14T22:09:35.610" Title="Wingpanel Clock Has Disappeared" Tags="|wingpanel|clock|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1195" PostTypeId="2" ParentId="1194" CreationDate="2015-08-08T19:57:18.290" Score="3" Body="&lt;p&gt;It's a &lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1356698&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I walked around it, randomly changing settings in &lt;code&gt;dconf-editor&lt;/code&gt; on &lt;code&gt;com&lt;/code&gt; &gt; &lt;code&gt;canonical&lt;/code&gt; &gt; &lt;code&gt;indicator&lt;/code&gt; &gt; &lt;code&gt;datetime&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yd07C.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yd07C.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-08-08T19:57:18.290" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1197" PostTypeId="1" CreationDate="2015-08-08T20:54:23.887" Score="1" ViewCount="143" Body="&lt;p&gt;When I click on the checkbox for Pastebin under Preferences-&gt;Extensions, result is the red error symbol as shown in the image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ww7NI.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_INFO 20:42:45.082713] Application.vala:155: Scratch version: 2.2.0&#xA;[_LOG_LEVEL_INFO 20:42:45.082796] Application.vala:157: Kernel version: 3.16.0-43-generic&#xA;[_LOG_LEVEL_DEBUG 20:42:45.084547] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.saved-state'&#xA;[_LOG_LEVEL_DEBUG 20:42:45.085301] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.settings'&#xA;[_LOG_LEVEL_DEBUG 20:42:45.086481] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.services'&#xA;[_LOG_LEVEL_WARN 20:42:45.093573] Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-382qEDO7EE: Connection refused&#xA;[_LOG_LEVEL_DEBUG 20:42:45.126218] [Gtk] Connecting to session manager&#xA;[_LOG_LEVEL_WARN 20:42:45.130225] [Gtk] Attempting to add a widget with type GtkScrolledWindow to a GtkDialog, but as a GtkBin subclass a GtkDialog can only contain one widget at a time; it already contains a widget of type GtkBox&#xA;[_LOG_LEVEL_FATAL 20:42:45.150586] [Gtk] gtk_header_bar_pack: assertion 'gtk_widget_get_parent (widget) == NULL' failed&#xA;[_LOG_LEVEL_FATAL 20:42:45.150629] Scratch will not function properly.&#xA;[_LOG_LEVEL_FATAL 20:42:45.265036] [Gtk] gtk_action_set_visible: assertion 'GTK_IS_ACTION (action)' failed&#xA;[_LOG_LEVEL_FATAL 20:42:45.265074] Scratch will not function properly.&#xA;[_LOG_LEVEL_DEBUG 20:42:45.267315] SplitView.vala:180: WelcomeScreen shown succefully&#xA;[_LOG_LEVEL_DEBUG 20:42:45.269806] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.plugins.folder-manager'&#xA;[_LOG_LEVEL_DEBUG 20:42:45.270178] MainWindow.vala:476: 'unsaved' directory already exists.&#xA;[_LOG_LEVEL_WARN 20:43:04.900835] [libpeas] pastebin: /usr/lib/x86_64-linux-gnu/scratch/plugins/pastebin/libpastebin.so: undefined symbol: soup_session_send_message&#xA;[_LOG_LEVEL_WARN 20:43:04.900918] [libpeas] Error loading plugin 'pastebin'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="811" LastEditorUserId="190" LastEditDate="2015-08-09T18:35:29.360" LastActivityDate="2015-08-09T18:35:29.360" Title="Pastebin extension not installing in Scratch, shows error icon" Tags="|code|" AnswerCount="1" CommentCount="2" ClosedDate="2015-08-10T06:57:08.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="1198" PostTypeId="1" AcceptedAnswerId="1207" CreationDate="2015-08-08T21:26:30.027" Score="17" ViewCount="5968" Body="&lt;p&gt;I have elementary OS set up on my 64 GB flash drive. For the last year or so, I've been (very happily) using OS X, and will likely continue to use it for a lot of work that I do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm very comfortable with the OS X multi touch gestures (3 fingers slide up to view all open windows, slide three fingers to move between workspaces, etc), so I want to enable these same exact gestures on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I go about doing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that &lt;code&gt;touchegg&lt;/code&gt; is the software to use, but I'm not quite sure which commands to actually use — in other words, what the contents of the config file needs to be. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a bonus question, I'd like two fingers swiping right/left in Chromium to go back and forward. How can I achieve that?&lt;/p&gt;&#xA;" OwnerUserId="819" LastEditorUserId="84" LastEditDate="2015-08-08T21:55:43.980" LastActivityDate="2015-08-09T12:21:47.597" Title="Setting up OS X-style multi touch gestures on elementary OS" Tags="|macbook|gesture|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1199" PostTypeId="1" AcceptedAnswerId="1203" CreationDate="2015-08-08T23:33:52.573" Score="7" ViewCount="2606" Body="&lt;p&gt;After reading several articles I understand that Solid State Drives (SSDs) require special considerations such as partition alignment, choice of file system etc. TRIM support is needed to set up SSDs for optimal performance and my SSD support trim.  I understand that adding “discard” to fstab is potentially dangerous but I'm no expert.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have recently moved to elementary OS from Arch Linix where I simply enabled the fstrim.timer using systemctl however I need to understand how this is handled in freya.&lt;/p&gt;&#xA;" OwnerUserId="59" LastActivityDate="2015-08-09T07:03:28.280" Title="How do I optimize my SSD with Trim in Freya?" Tags="|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1202" PostTypeId="1" AcceptedAnswerId="1224" CreationDate="2015-08-09T02:13:16.507" Score="0" ViewCount="1993" Body="&lt;p&gt;After installing elementary OS Freya x64 I updated it and installed AMD graphics drivers. After rebooting everything worked fine, but later I installed some programs and now Freya freezes on loading screen everytime I try to boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I press &lt;code&gt;ctrl+alt+f1&lt;/code&gt; there is no error message and when I press &lt;code&gt;f2&lt;/code&gt; I see some system messages, but eventually it stops and then nothing happens. There doesn't seem to be any error and it doesn't always stop at exactly the same point but it's always after &quot;System V runlevel compatibility&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can only go to recovery mode and drop to root shell, but I don't know what to do there to fix my system. Could it be something wrong with AMD drivers? Please help.&lt;/p&gt;&#xA;" OwnerUserId="827" LastEditorUserId="9" LastEditDate="2015-08-09T03:11:51.387" LastActivityDate="2015-08-16T15:21:26.680" Title="elementary OS stuck on loading screen" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1203" PostTypeId="2" ParentId="1199" CreationDate="2015-08-09T07:03:28.280" Score="2" Body="&lt;h1&gt;Setting up a trim job on Freya&lt;/h1&gt;&#xA;&lt;p&gt;You can add the TRIM command to /etc/rc.local. Then this command will be executed automatically on system boot. This hardly slows the boot process down.&lt;/p&gt;&#xA;&lt;p&gt;You can do that as follows:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in the terminal:&#xA;&lt;code&gt;sudo -i scratch-text-editor /etc/rc.local&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Above the line exit 0 in that file, you now add the TRIM command&#xA;fstrim for every automatically mounted EXT4 partition.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Note: not for partitions that aren't mounted by default! And also not for the swap partition, as that's already being trimmed automatically by the system by default, during the boot process.&lt;/p&gt;&#xA;&lt;p&gt;Your rc.local should look like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh -e&#xA;#&#xA;# rc.local&#xA;#&#xA;# This script is executed at the end of each multiuser runlevel.&#xA;# Make sure that the script will &amp;quot;exit 0&amp;quot; on success or any other&#xA;# value on error.&#xA;#&#xA;# In order to enable or disable this script just change the execution&#xA;# bits.&#xA;#&#xA;# By default this script does nothing.&#xA;fstrim /&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you have a separate home partition, then you add the following line as well, above exit 0:&#xA;&lt;code&gt;fstrim /home&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Note: if you have a separate partition for /boot/efi, don't add a trim command line for that in rc.local. It's useless, as that partition is seldom being written to. And it may even cause malfunctions.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Save the modified file and close it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot your computer.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h1&gt;Disable the now useless weekly trim&lt;/h1&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo mv -v /etc/cron.weekly/fstrim /fstrim&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;With that command you've transferred the script file fstrim to the root directory, thus disabling it.&lt;/p&gt;&#xA;&lt;p&gt;Source and other ways to optimize your SSD on elementary/ubuntu 14.04: &lt;a href=&quot;https://sites.google.com/site/easylinuxtipsproject/ssd&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-09T07:03:28.280" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1204" PostTypeId="2" ParentId="1059" CreationDate="2015-08-09T07:20:45.507" Score="4" Body="&lt;p&gt;As per &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1059/how-can-i-install-indicator-session-without-pulling-in-extra-packages?noredirect=1#comment1797_1059&quot;&gt;these&lt;/a&gt; &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1059/how-can-i-install-indicator-session-without-pulling-in-extra-packages?noredirect=1#comment1964_1059&quot;&gt;comments&lt;/a&gt;, using &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;--no-install-recommends&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;prevents the extra packages from installing.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-09T07:20:45.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1205" PostTypeId="1" AcceptedAnswerId="1221" CreationDate="2015-08-09T09:13:25.510" Score="1" ViewCount="6171" Body="&lt;p&gt;After installing Android Studio, I started getting this error: &#xA;&lt;code&gt;Error: Could not determine Java version.&lt;/code&gt; upon gradle sync. I do have Java JDK7 installed, OpenJDK, and OpenJSE installed. How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="128" LastActivityDate="2015-08-10T14:36:03.510" Title="Android Studio Error: Could not determine Java version" Tags="|release-freya|android|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="1206" PostTypeId="1" CreationDate="2015-08-09T11:09:51.507" Score="3" ViewCount="1359" Body="&lt;p&gt;For some reason, icons are showing up on the desktop. I would like nothing to show. Thanks a lot for help in advance. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WH7LN.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WH7LN.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="828" LastEditorUserId="190" LastEditDate="2015-08-09T19:01:49.347" LastActivityDate="2015-08-09T19:01:49.347" Title="Remove icons from desktop" Tags="|desktop|wallpaper|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1207" PostTypeId="2" ParentId="1198" CreationDate="2015-08-09T12:21:47.597" Score="5" Body="&lt;p&gt;In the &lt;a href=&quot;http://simplyelementary.net/post/123309080052/toucheggconf&quot;&gt;show notes&lt;/a&gt; of the first episode of simply elementary they covered the basic setup of a configuration file of touchegg. Their comments on the script are as follows:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;It’s a very basic configuration that allows you to switch between workspaces and view the multitasking view with three-finger swipes. It is very similar to the default Mac OS X gestures if you are used to them. Note: It assumes that you use natural scrolling (the system default), otherwise the left/right swipe directions might feel backward to you. If you prefer the swipe directions to be reversed you can always modify the file to change the behavior.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You can download the configuration file from the Dropbox of Nathan Dyer &lt;a href=&quot;https://www.dropbox.com/s/kld6wciz7x1qa63/touchegg.conf?dl=1&quot;&gt;here&lt;/a&gt;. &#xA;I know this only answer part of your questions, but I hope it will help you on your way. Maybe by studying the configuration file you can figure out how to set up the rest you want.&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2015-08-09T12:21:47.597" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1208" PostTypeId="2" ParentId="459" CreationDate="2015-08-09T12:28:44.860" Score="6" Body="&lt;p&gt;On &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1430587&quot;&gt;Launchpad&lt;/a&gt; the following fixes had been suggested:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Fixing this problem is rather too easy. Open a terminal (Ctrl+Alt+T) and use the following command:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.cursor active false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://itsfoss.com/invisible-mouse-cursor-ubuntu-1310/&quot;&gt;http://itsfoss.com/invisible-mouse-cursor-ubuntu-1310/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or alternatively:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Actually.&#xA;  gsettings set org.gnome.settings-daemon.plugins.cursor active false&#xA;  didn't work for me. But as soon as I changed that false to true, it was fixed.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1430587/comments/9&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1430587/comments/9&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-08-09T12:28:44.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1209" PostTypeId="2" ParentId="1206" CreationDate="2015-08-09T13:36:59.007" Score="4" Body="&lt;p&gt;This is likely caused by installing Nemo, an alternative GTK file manager. You have two options, both will likely make any icons on your desktop disappear. If you want to use icons on your desktop, check &lt;a href=&quot;https://elementaryos.stackexchange.com/a/21/68&quot;&gt;&lt;em&gt;How can I place files on my desktop?&lt;/em&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Fix the &lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow noreferrer&quot;&gt;.desktop&lt;/a&gt; file&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;To get rid of the unclosable desktop window you need to add &lt;code&gt;--no-desktop&lt;/code&gt; to the &lt;code&gt;nemo.desktop&lt;/code&gt; file so it reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=nemo --no-desktop %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By default you can find this file in &lt;code&gt;/usr/share/applications/&lt;/code&gt;. If you made the changes there, there is a chance they get overwritten with the next update for Nemo, so it's better to first copy the file to &lt;code&gt;~/.local/share/applications/&lt;/code&gt; (which is the equivalent inside your home directory):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/nemo.desktop ~/.local/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then edit it with a text editor of your choice (&lt;code&gt;scratch-text-editor&lt;/code&gt; to start a GUI app or &lt;code&gt;nano&lt;/code&gt; if you prefer the command line).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Based on an answer to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/356/is-nautilus-really-not-recommended/553#553&quot;&gt;&lt;em&gt;Is Nautilus really “not-recommended”?&lt;/em&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Uninstall Nemo&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alternatively&lt;/strong&gt; you can of course just remove Nemo from your system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply type &lt;code&gt;sudo apt-get remove nemo&lt;/code&gt; in terminal.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-09T13:36:59.007" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1211" PostTypeId="1" AcceptedAnswerId="1212" CreationDate="2015-08-09T14:15:15.290" Score="7" ViewCount="2042" Body="&lt;p&gt;I am not sure if it is a bug with elementary OS or with the new LibreOffice 5, but the LibreOffice GUI is broken. See the screenshot, where title bar is missing on unmaximised application window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XtLqA.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XtLqA.png&quot; alt=&quot;Libre Office 5 GUI is broken in elementary OS Freya&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case of maximized LibreOffice window, the menu-bar disappears. Also all dialog boxes are similarly broken. I do not currently have the maximized screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any fix for menu and/or title bar?&lt;/p&gt;&#xA;" OwnerUserId="832" LastEditorUserId="34" LastEditDate="2015-08-10T08:48:48.203" LastActivityDate="2015-08-10T08:48:48.203" Title="LibreOffice 5 on Freya: Title bar and/or menu bar is missing" Tags="|release-freya|applications|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1212" PostTypeId="2" ParentId="1211" CreationDate="2015-08-09T14:20:15.527" Score="12" Body="&lt;p&gt;Uninstall the package &lt;code&gt;libreoffice-gtk3&lt;/code&gt; and install &lt;code&gt;libreoffice-gtk&lt;/code&gt; instead.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove libreoffice-gtk3&#xA;sudo apt-get install libreoffice-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;LibreOffice should be usable again.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-09T14:20:15.527" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1213" PostTypeId="1" CreationDate="2015-08-09T14:38:21.320" Score="2" ViewCount="809" Body="&lt;p&gt;Well, I've been trying to install elementary OS Freya 0.3, but I've been having some issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded the 64-bit version from &lt;code&gt;www.elementary.io&lt;/code&gt;, and used unetbootin, to make my pen-drive &lt;code&gt;bootable&lt;/code&gt;, but when I boot and press install, the following message appears - &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Error: invalid magic number. Unaligned pointer 0xbf4c2c08  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I downloaded a dozen of times and also tried to use Rufus 2.2, but it doesn't even boot. Can someone help me?&lt;/p&gt;&#xA;" OwnerUserId="835" LastEditorUserId="2708" LastEditDate="2015-11-26T07:14:14.900" LastActivityDate="2015-11-26T07:14:14.900" Title="Error: invalid magic number. Unaligned pointer 0xbf4c2c08" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1215" PostTypeId="2" ParentId="459" CreationDate="2015-08-09T15:08:56.140" Score="0" Body="&lt;p&gt;I found that the only kind of permanent solution is to keep icon zoom at 1. Anything greater exposes you to the bug. &lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-08-09T15:08:56.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1217" PostTypeId="1" CreationDate="2015-08-09T17:24:55.337" Score="2" ViewCount="37" Body="&lt;p&gt;I own an &lt;a href=&quot;http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&amp;amp;swLangOid=8&amp;amp;swEnvOid=4059&quot; rel=&quot;nofollow&quot;&gt;HP ProBook 450 G2&lt;/a&gt; with Freya installed over it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My WiFi driver keeps crashing and I have to enable it through a tip I found in a forum &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=1543006&amp;amp;page=160&amp;amp;p=13215305#post13215305&quot; rel=&quot;nofollow&quot;&gt;post&lt;/a&gt;, by executing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod rtl8723be &amp;amp;&amp;amp; sudo modprobe rtl8723be&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How do I run diagnostics on it before reporting it as a bug?&lt;/p&gt;&#xA;" OwnerUserId="831" LastEditorUserId="3757" LastEditDate="2016-04-25T07:52:36.207" LastActivityDate="2016-04-25T07:52:36.207" Title="Running diagnostics on a driver bug?" Tags="|release-freya|hardware|wifi|" AnswerCount="0" CommentCount="0" ClosedDate="2016-05-07T10:40:09.217" ContentLicense="CC BY-SA 3.0" />
  <row Id="1218" PostTypeId="2" ParentId="1197" CreationDate="2015-08-09T17:48:52.583" Score="0" Body="&lt;p&gt;Please report this as a bug here: &lt;a href=&quot;https://bugs.launchpad.net/scratch&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/scratch&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remember to provide the log file you posted here and any detail that might help devs reproduce the issue.&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2015-08-09T17:48:52.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1219" PostTypeId="1" CreationDate="2015-08-09T18:36:39.067" Score="0" ViewCount="369" Body="&lt;p&gt;The Battery Percentage Indicator on the menu bar only show 70% when charging. Is there something wrong with that? Or is the developer decide to make it 70% for charging default?&lt;/p&gt;&#xA;" OwnerUserId="817" LastActivityDate="2016-03-16T18:56:29.883" Title="Battery Indicator only show 70% during charging" Tags="|menu|battery|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1221" PostTypeId="2" ParentId="1205" CreationDate="2015-08-09T19:12:33.510" Score="2" Body="&lt;p&gt;Read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/716/how-do-i-install-oracle-java-jdk-8-on-freya/717#717&quot;&gt;this&lt;/a&gt; for how to installing JDK on your elementary OS (also it works for java 7).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then If your problem still appears then go to &lt;code&gt;Configure -&amp;gt; Project defaults -&amp;gt; Project structure -&amp;gt; SDK Location&lt;/code&gt; in welcome screen and add your JDK path. (Usually on &lt;code&gt;/usr/lib/jvm/jdk1.x.y/&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="47" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-10T14:36:03.510" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1223" PostTypeId="1" CreationDate="2015-08-09T19:37:46.533" Score="10" ViewCount="453" Body="&lt;p&gt;I have my laptop set up to go to sleep after 30 minutes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4JB3N.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4JB3N.png&quot; alt=&quot;sleep settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I come back to my computer, and unlock it by entering the password for my user account, a notification pops up in the upper right corner of my screen as soon as the computer is unlocked, which reads:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Automatic suspend&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Computer will suspend very soon because of inactivity.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SWuMi.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SWuMi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would make sense if this notification popped up &lt;em&gt;before&lt;/em&gt; going to sleep, but I do not understand why it pops up &lt;em&gt;after&lt;/em&gt; I &quot;wake up&quot; my computer.  It's slightly annoying because I then have to manually close the notification by clicking the 'X'-- it does not go away on its own. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I change this behavior so that the notification does not pop up when I wake the laptop? And/or, how do I make this specific notification disappear on its own?&lt;/p&gt;&#xA;" OwnerUserId="277" LastActivityDate="2019-12-06T07:08:06.017" Title="Automatic suspend notification pops up too late" Tags="|release-freya|suspend|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1224" PostTypeId="2" ParentId="1202" CreationDate="2015-08-09T20:52:24.800" Score="1" Body="&lt;p&gt;I reinstalled AMD graphics driver, which I downloaded from AMD website and everything works fine. I still don't know what caused the issue, but it's fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I found out that the issue may be caused by AMD drivers which break after kernel upgrades. It's possible that upgrading kernel to newer version and installing AMD open source drivers could fix this issue&#xA;&lt;a href=&quot;https://allienworks.net/2015/elementary-os-freya-amd-drivers/&quot; rel=&quot;nofollow&quot;&gt;https://allienworks.net/2015/elementary-os-freya-amd-drivers/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="827" LastEditorUserId="827" LastEditDate="2015-08-16T15:21:26.680" LastActivityDate="2015-08-16T15:21:26.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1225" PostTypeId="2" ParentId="946" CreationDate="2015-08-09T23:49:00.430" Score="3" Body="&lt;p&gt;TL;DR: (probably because) the partition is marked hidden.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A &lt;code&gt;dd&lt;/code&gt;-copied USB stick booted fine on a few machines I tried. But these were 5-10 year old desktop boxes with BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary ISO is an ISOHYBRID, like pretty much every distro these days. That means the disk image is both a bootable CD and an MBR-partitioned hard disk; a clever hack. But looking at the partition table, it is marked type &lt;code&gt;17&lt;/code&gt; (hex), or &quot;Hidden HPFS/NTFS&quot;. Of course, that's not what the partition is, hidden or not. Apparently that was the convention for a period of time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also appears that the ISO was built with Debian live-build 3.0, which is now a few versions old. Debian 6 also uses the same partition type. Debian 5 was not ISOHYBRID, and had no MBR. Debian 7 and 8, and other current distros use partition type &lt;code&gt;00&lt;/code&gt;, which technically means &quot;empty&quot;. That makes no sense either, but apparently it works better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One more consistently visible effect of having a &quot;Hidden HPFS/NTFS&quot; partition is that the Files app or equivalent will not show it when you plug in the stick, for you to click-to-mount. But it is visible (and click-mountable) in the Gnome Disks app, for example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps the particular BIOS/EFI you have also &quot;honors&quot; the partition type in the same way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed that one partition type byte on the stick, and &quot;elementary OS&quot; appeared in the UI when I plugged it in, as you expected in your screenshots. As I mentioned earlier, it booted fine for me regardless, so I have no evidence on that aspect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to come up with a &quot;one-liner&quot; for you to patch the same byte so you could try it, but couldn't come up with something good. Maybe someone else might have an idea; or I could come up with a &quot;three-liner&quot; or &quot;five-liner&quot; if you really want to try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Going forward, I have no working knowledge of the particulars of how elementary builds their distro, so it may not be as simple as &quot;do it like this&quot;. But it seems like an issue they can track and prioritize.&lt;/p&gt;&#xA;" OwnerUserId="765" LastActivityDate="2015-08-09T23:49:00.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1226" PostTypeId="1" AcceptedAnswerId="1236" CreationDate="2015-08-10T00:16:46.670" Score="6" ViewCount="1053" Body="&lt;p&gt;My native language is Brazilian Portuguese. The system is correctly set, but the login screen remains in English, even if I apply pt-br globally in the settings screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to manually set that?&lt;/p&gt;&#xA;" OwnerUserId="839" LastActivityDate="2017-12-07T20:26:25.210" Title="Change login language manually" Tags="|greeter|language|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1227" PostTypeId="1" CreationDate="2015-08-10T01:30:59.350" Score="2" ViewCount="329" Body="&lt;p&gt;I have been trying out elementary OS on a HP stream 11 laptop and it is working great, but what is the deal with the mouse pointer? I am using a USB corded mouse (but have also tried the trackpad) and the mouse pointer moves around as if it is skating on ice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I stop moving the mouse, the pointer keeps moving slightly until it finally stops. Why is it not stopping immediately after I stop moving the mouse? &lt;/p&gt;&#xA;" OwnerUserId="840" LastActivityDate="2015-09-18T10:17:20.697" Title="Why does the mouse pointer move as if it is on a block of ice?" Tags="|mouse|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1228" PostTypeId="2" ParentId="920" CreationDate="2015-08-10T07:26:18.353" Score="4" Body="&lt;p&gt;Aside from already suggested answers (force enabling of hibernation, and normal shutdown as apps should resume where they left, which obviously doesn't work for non-elementary apps like LibreOffice etc.), there is a third option:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Suspend&lt;/strong&gt;. If you just want to start a new day where you left the day before, the prefered way is to suspend rather than hibernate. It works on every hardware (contrary to hibernation), is faster and more easy on your machine, especially if you have older one. A little drawback is it takes a little power to keep the machine suspended.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2015-08-10T07:26:18.353" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1230" PostTypeId="1" CreationDate="2015-08-10T14:23:04.197" Score="9" ViewCount="3921" Body="&lt;p&gt;I've been attempting to change the bootsplash. I've followed the instructions I've found for ubuntu 14.04 thinking they would work since it's based on that distro. I created my own theme which I'll paste the code below. Are there any special instructions since elementary OS is very heavily rebuilt?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dell.plymouth:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Plymouth Theme]&#xA;Name=dell&#xA;Description=Dell Bootsplash&#xA;ModuleName=script&#xA;&#xA;[script]&#xA;ImageDir=/lib/plymouth/themes/dell&#xA;ScriptFile=/lib/plymouth/themes/dell/dell.script&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;dell.script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wallpaper_image = Image(“wallpaper.png”);&#xA;screen_width = Window.GetWidth();&#xA;screen_height = Window.GetHeight();&#xA;resized_wallpaper_image = wallpaper_image.Scale(screen_width,screen_height);&#xA;wallpaper_sprite = Sprite(resized_wallpaper_image);&#xA;wallpaper_sprite.SetZ(-100);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IbXfe.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IbXfe.png&quot; alt=&quot;1280 width&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="846" LastEditorUserId="45" LastEditDate="2015-08-12T21:02:13.177" LastActivityDate="2015-08-12T21:12:36.257" Title="Changing bootsplash" Tags="|release-freya|themes|boot|plymouth|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1231" PostTypeId="1" CreationDate="2015-08-10T15:32:47.920" Score="2" ViewCount="775" Body="&lt;p&gt;I'm having trouble installing on my Surface Pro (see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1111/help-installing-on-surface-pro-2&quot;&gt;this question&lt;/a&gt;) and I suspect that it is related to this recent &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/elementaryos/congrego-freya/revision/122&quot; rel=&quot;nofollow&quot;&gt;bug fix&lt;/a&gt; on LaunchPad. The Surface is a UEFI based system, which might explain why GRUB fails to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I add the &lt;code&gt;grub-efi-amd64&lt;/code&gt; and &lt;code&gt;grub-efi-amd64-signed&lt;/code&gt; packages to an ISO to test out this theory? I have tried checking out the branch with Bazaar and building it with &lt;code&gt;sudo ./congrego.sh&lt;/code&gt; but this fails with this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;E: Cannot install into target '/media/elliot/d2/elementary/freya/tmp/amd64/chroot' mounted with noexec or nodev&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="778" LastActivityDate="2016-02-18T00:17:10.490" Title="How to add a package to the live CD (iso)?" Tags="|system-installation|package-management|iso|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1232" PostTypeId="1" AcceptedAnswerId="1233" CreationDate="2015-08-10T18:25:34.780" Score="6" ViewCount="709" Body="&lt;p&gt;Always when I open Geary it automatically maximize.&lt;br&gt;&#xA;I looked into settings in dconf tools &lt;code&gt;org.yorba.geary window-maximize&lt;/code&gt; is not checked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody who knows how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="227" LastEditDate="2015-08-11T05:18:36.673" LastActivityDate="2015-08-11T05:18:36.673" Title="Window (Geary) always open maximized?" Tags="|pantheon-mail|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1233" PostTypeId="2" ParentId="1232" CreationDate="2015-08-10T19:05:14.150" Score="8" Body="&lt;p&gt;It's not a bug, it's a feature ;)&lt;br&gt;&#xA;elementary OS automatically maximizes every starting window that is bigger than 70% of your screen size.&#xA;You can turn off this behaviour by running the following command in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter auto-maximize false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;BTW: It will be disabled by default in the next release of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-10T19:05:14.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1234" PostTypeId="2" ParentId="459" CreationDate="2015-08-10T20:11:31.703" Score="6" Body="&lt;p&gt;Update kernel and X to &lt;strong&gt;vivid&lt;/strong&gt; fix this for me. This became possible after Ubuntu 14.04.3 release. More info on &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot;&gt;Ubuntu Wiki&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Warning!&lt;/strong&gt; Be careful and attentive to this, the system can fail. If you use apps with 32-bit libs (Skype, Steam, Wine), first remove them and install again after update. Check packages that will be removed before pressing &lt;kbd&gt;Y&lt;/kbd&gt;. In my case, everything went well and it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;maxim@ProBook:~$ sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following extra packages will be installed:&#xA;  libegl1-mesa-lts-vivid libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;  libgl1-mesa-glx-lts-vivid libglapi-mesa-lts-vivid libgles1-mesa-lts-vivid&#xA;  libgles2-mesa-lts-vivid libllvm3.6 libxatracker2-lts-vivid&#xA;  linux-headers-3.19.0-25 linux-headers-3.19.0-25-generic&#xA;  linux-headers-generic-lts-vivid linux-image-3.19.0-25-generic&#xA;  linux-image-extra-3.19.0-25-generic linux-image-generic-lts-vivid&#xA;  xserver-xorg-input-evdev-lts-vivid xserver-xorg-input-mouse-lts-vivid&#xA;  xserver-xorg-input-synaptics-lts-vivid xserver-xorg-input-vmmouse-lts-vivid&#xA;  xserver-xorg-input-wacom-lts-vivid xserver-xorg-video-ati-lts-vivid&#xA;  xserver-xorg-video-cirrus-lts-vivid xserver-xorg-video-fbdev-lts-vivid&#xA;  xserver-xorg-video-intel-lts-vivid xserver-xorg-video-mach64-lts-vivid&#xA;  xserver-xorg-video-mga-lts-vivid xserver-xorg-video-neomagic-lts-vivid&#xA;  xserver-xorg-video-nouveau-lts-vivid xserver-xorg-video-openchrome-lts-vivid&#xA;  xserver-xorg-video-r128-lts-vivid xserver-xorg-video-radeon-lts-vivid&#xA;  xserver-xorg-video-savage-lts-vivid&#xA;  xserver-xorg-video-siliconmotion-lts-vivid&#xA;  xserver-xorg-video-sisusb-lts-vivid xserver-xorg-video-tdfx-lts-vivid&#xA;  xserver-xorg-video-trident-lts-vivid xserver-xorg-video-vesa-lts-vivid&#xA;  xserver-xorg-video-vmware-lts-vivid&#xA;Suggested packages:&#xA;  fdutils linux-lts-vivid-tools xfonts-100dpi xfonts-75dpi&#xA;  gpointing-device-settings touchfreeze firmware-linux&#xA;Recommended packages:&#xA;  libegl1-mesa-drivers-lts-vivid&#xA;The following packages will be REMOVED:&#xA;  libegl1-mesa-drivers-lts-utopic libegl1-mesa-lts-utopic libgbm1-lts-utopic&#xA;  libgl1-mesa-dri-lts-utopic libgl1-mesa-glx-lts-utopic&#xA;  libglapi-mesa-lts-utopic libgles1-mesa-lts-utopic libgles2-mesa-lts-utopic&#xA;  libopenvg1-mesa-lts-utopic libwayland-egl1-mesa-lts-utopic&#xA;  libxatracker2-lts-utopic xserver-xorg-core-lts-utopic&#xA;  xserver-xorg-input-all-lts-utopic xserver-xorg-input-evdev-lts-utopic&#xA;  xserver-xorg-input-mouse-lts-utopic xserver-xorg-input-synaptics-lts-utopic&#xA;  xserver-xorg-input-vmmouse-lts-utopic xserver-xorg-input-wacom-lts-utopic&#xA;  xserver-xorg-lts-utopic xserver-xorg-video-all-lts-utopic&#xA;  xserver-xorg-video-ati-lts-utopic xserver-xorg-video-cirrus-lts-utopic&#xA;  xserver-xorg-video-fbdev-lts-utopic xserver-xorg-video-intel-lts-utopic&#xA;  xserver-xorg-video-mach64-lts-utopic xserver-xorg-video-mga-lts-utopic&#xA;  xserver-xorg-video-modesetting-lts-utopic&#xA;  xserver-xorg-video-neomagic-lts-utopic xserver-xorg-video-nouveau-lts-utopic&#xA;  xserver-xorg-video-openchrome-lts-utopic xserver-xorg-video-r128-lts-utopic&#xA;  xserver-xorg-video-radeon-lts-utopic xserver-xorg-video-savage-lts-utopic&#xA;  xserver-xorg-video-siliconmotion-lts-utopic&#xA;  xserver-xorg-video-sisusb-lts-utopic xserver-xorg-video-tdfx-lts-utopic&#xA;  xserver-xorg-video-trident-lts-utopic xserver-xorg-video-vesa-lts-utopic&#xA;  xserver-xorg-video-vmware-lts-utopic&#xA;The following NEW packages will be installed:&#xA;  libegl1-mesa-lts-vivid libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;  libgl1-mesa-glx-lts-vivid libglapi-mesa-lts-vivid libgles1-mesa-lts-vivid&#xA;  libgles2-mesa-lts-vivid libllvm3.6 libwayland-egl1-mesa-lts-vivid&#xA;  libxatracker2-lts-vivid linux-generic-lts-vivid linux-headers-3.19.0-25&#xA;  linux-headers-3.19.0-25-generic linux-headers-generic-lts-vivid&#xA;  linux-image-3.19.0-25-generic linux-image-extra-3.19.0-25-generic&#xA;  linux-image-generic-lts-vivid xserver-xorg-core-lts-vivid&#xA;  xserver-xorg-input-all-lts-vivid xserver-xorg-input-evdev-lts-vivid&#xA;  xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid&#xA;  xserver-xorg-input-vmmouse-lts-vivid xserver-xorg-input-wacom-lts-vivid&#xA;  xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid&#xA;  xserver-xorg-video-ati-lts-vivid xserver-xorg-video-cirrus-lts-vivid&#xA;  xserver-xorg-video-fbdev-lts-vivid xserver-xorg-video-intel-lts-vivid&#xA;  xserver-xorg-video-mach64-lts-vivid xserver-xorg-video-mga-lts-vivid&#xA;  xserver-xorg-video-neomagic-lts-vivid xserver-xorg-video-nouveau-lts-vivid&#xA;  xserver-xorg-video-openchrome-lts-vivid xserver-xorg-video-r128-lts-vivid&#xA;  xserver-xorg-video-radeon-lts-vivid xserver-xorg-video-savage-lts-vivid&#xA;  xserver-xorg-video-siliconmotion-lts-vivid&#xA;  xserver-xorg-video-sisusb-lts-vivid xserver-xorg-video-tdfx-lts-vivid&#xA;  xserver-xorg-video-trident-lts-vivid xserver-xorg-video-vesa-lts-vivid&#xA;  xserver-xorg-video-vmware-lts-vivid&#xA;0 upgraded, 44 newly installed, 39 to remove and 0 not upgraded.&#xA;Need to get 80.5 MB of archives.&#xA;After this operation, 308 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-08-10T20:11:31.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1236" PostTypeId="2" ParentId="1226" CreationDate="2015-08-10T22:36:45.610" Score="2" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &quot;LANG=pt_BR.utf8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logout and check your greeter is in Brazilian.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-08-10T22:36:45.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1237" PostTypeId="1" CreationDate="2015-08-11T01:04:35.480" Score="2" ViewCount="258" Body="&lt;p&gt;I know that you will tell me that I should use Libreoffice, but I have an Office licence and I still use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use Wine to run Office 2007 but when I launch Word or any Office app, Wine launches a &quot;Wine application loader&quot; instead of the real Word app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I display the actual Word icon on Plank?&lt;/p&gt;&#xA;" OwnerUserId="855" LastEditorUserId="9" LastEditDate="2015-08-11T02:43:00.820" LastActivityDate="2015-08-11T02:46:49.537" Title="Wine opens &quot;Wine application loader&quot; instead of Microsoft Word" Tags="|office|wine|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1239" PostTypeId="2" ParentId="1237" CreationDate="2015-08-11T02:46:49.537" Score="4" Body="&lt;p&gt;If you have problems with starting MS Office with wine (silent crashes, etc.) then you might be missing some libraries (&lt;code&gt;.dll&lt;/code&gt;) or you haven't properly installed it (You can install most of them through &lt;code&gt;Winetricks&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To troubleshoot it, try running it through terminal like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wine /path/to/office/winword.exe&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you should get some error details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As with icons, similar questions have been answered &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1053/android-studio-blurry-second-icon-on-plank/1058#1058&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/how-can-i-fix-the-fuzzy-google-chrome-icon-that-appears-in-plank&quot;&gt;here&lt;/a&gt;. To get the icon you want on plank, you need to create a .desktop file and put it in either :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/share/applications&lt;/code&gt;  &lt;strong&gt;(your profile only)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/share/applications&lt;/code&gt; &lt;strong&gt;(everyone, requires sudo access !)&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Briefly, it should look something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=MS Word&#xA;Exec=wine /path/to/office/winword.exe&#xA;Icon=/path/to/your/MS\ Word/Icon/icon.png&#xA;Type=Application&#xA;StartupWMClass=Winword.exe&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you are used to MS Office look and feel, maybe you could give Kingsoft office a try.&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-11T02:46:49.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1240" PostTypeId="1" AcceptedAnswerId="1609" CreationDate="2015-08-11T07:49:43.607" Score="6" ViewCount="2308" Body="&lt;p&gt;I installed Telegram messenger from &lt;code&gt;ppa:atareao/telegram&lt;/code&gt; (Source: &lt;a href=&quot;http://www.webupd8.org/2015/01/install-official-telegram-desktop-app.html&quot; rel=&quot;noreferrer&quot;&gt;Web Upd8)&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Telegram messenger is a Qt app. elementary OS seem to set the Qt style to Windows instead of default. This results in the Telegram messenger dialog window not using the QtCreator but the Windows dialog. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the windows dialog:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Mz6U5.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mz6U5.png&quot; alt=&quot;Windows dialog&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the Qt Dialog that I want to use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TCMrQ.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TCMrQ.png&quot; alt=&quot;Qt Dialog&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is described in more detail there:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make tdesktop look native / Do not set Qt style to win by default &lt;a href=&quot;https://github.com/telegramdesktop/tdesktop/issues/987&quot; rel=&quot;noreferrer&quot;&gt;#987&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Can the Linux client use GTK FileChooser? &lt;a href=&quot;https://github.com/telegramdesktop/tdesktop/issues/982#issue-99888421&quot; rel=&quot;noreferrer&quot;&gt;#982&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My question to the community is the following:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I configure my elementary OS setup to make Telegram use the Qt Dialog?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="34" LastEditDate="2015-08-11T12:53:21.940" LastActivityDate="2017-06-15T13:50:49.330" Title="How to set Qt style to default?" Tags="|qt|gui-toolkits|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1241" PostTypeId="1" AcceptedAnswerId="1250" CreationDate="2015-08-11T12:46:39.993" Score="14" ViewCount="1124" Body="&lt;p&gt;I can't open a new tab or new file in Scratch. Nothing happens when I click on the + icon and the following image occurs when I close all documents and select &quot;New File&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3Gubz.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3Gubz.png&quot; alt=&quot;Screenshot demonstrating the issue&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running scratch from the command line and selecting a new file gives me the following on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_INFO 09:56:27.534393] Application.vala:157: Kernel version: 3.19.0-25-generic&#xA;[_LOG_LEVEL_DEBUG 09:56:27.535770] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.saved-state'&#xA;[_LOG_LEVEL_FATAL 09:56:27.612347] [Gtk] gtk_header_bar_pack: assertion 'gtk_widget_get_parent (widget) == NULL' failed&#xA;[_LOG_LEVEL_FATAL 09:56:27.612392] Scratch will not function properly.&#xA;[_LOG_LEVEL_FATAL 09:56:27.706954] file /build/scratch-text-editor-JxlBhk/scratch-text-editor-2.2.0~r1522/src/MainWindow‌​.vala: line 421: uncaught error: Arquivo ou diretório não encontrado (g-io-error-quark, 1)&#xA;[_LOG_LEVEL_FATAL 09:56:27.707004] Scratch will not function properly.&#xA;[_LOG_LEVEL_FATAL 09:56:27.707044] [Gtk] gtk_action_set_visible: assertion 'GTK_IS_ACTION (action)' failed&#xA;[_LOG_LEVEL_FATAL 09:56:27.707070] Scratch will not function properly. &#xA;[_LOG_LEVEL_FATAL 09:56:27.707235] file /build/scratch-text-editor- JxlBhk/scratch-text-editor-2.2.0~r1522/src/MainWindow‌​.vala: line 421: uncaught error: Arquivo ou diretório não encontrado (g-io-error-quark, 1)&#xA;[_LOG_LEVEL_FATAL 09:56:27.707270] Scratch will not function properly.&#xA;[_LOG_LEVEL_DEBUG 09:56:27.709947] SplitView.vala:180: WelcomeScreen shown succefully&#xA;[_LOG_LEVEL_DEBUG 09:56:27.713487] Settings.vala:158: Loading settings from schema 'org.pantheon.scratch.plugins.folder-manager'&#xA;[_LOG_LEVEL_DEBUG 09:56:27.713872] MainWindow.vala:472: create 'unsaved' directory: /home/bpantoja/.local/share/scratch-text-editor/unsaved&#xA;[_LOG_LEVEL_FATAL 09:56:27.713949] file /build/scratch-text-editor-JxlBhk/scratch-text-editor-2.2.0~r1522/src/MainWindow‌​.vala: line 473: uncaught error: Erro ao criar o diretório: Permissão negada (g-io-error-quark, 14)&#xA;[_LOG_LEVEL_FATAL 09:56:27.713983] Scratch will not function properly.&#xA;[_LOG_LEVEL_DEBUG 09:56:29.189314] SplitView.vala:188: WelcomeScreen hidden succefully&#xA;[_LOG_LEVEL_DEBUG 09:56:29.191560] SplitView.vala:126: View added succefully&#xA;[_LOG_LEVEL_FATAL 09:56:29.191781] file /build/scratch-text-editor-JxlBhk/scratch-text-editor-2.2.0~r1522/src/Widgets/Do‌​cumentView.vala: line 103: uncaught error: Erro ao abrir arquivo &quot;/home/bpantoja/.local/share/scratch-text-editor/unsaved/Ficheiro de texto de 2015-08-12 09:56:29&quot;: Arquivo ou diretório não encontrado (g-io-error-quark, 1)&#xA;[_LOG_LEVEL_FATAL 09:56:29.191834] Scratch will not function properly.&#xA;[_LOG_LEVEL_FATAL 09:56:30.724841] file /build/scratch-text-editor-JxlBhk/scratch-text-editor-2.2.0~r1522/src/Widgets/Do‌​cumentView.vala: line 103: uncaught error: Erro ao abrir arquivo &quot;/home/bpantoja/.local/share/scratch-text-editor/unsaved/Ficheiro de texto de 2015-08-12 09:56:30&quot;: Arquivo ou diretório não encontrado (g-io-error-quark, 1)&#xA;[_LOG_LEVEL_FATAL 09:56:30.724916] Scratch will not function properly.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="860" LastEditorUserId="45" LastEditDate="2015-08-14T19:32:35.357" LastActivityDate="2016-06-12T22:11:40.317" Title="Can't open a new tab or new file on scratch" Tags="|release-freya|code|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1242" PostTypeId="1" CreationDate="2015-08-11T13:06:04.113" Score="2" ViewCount="443" Body="&lt;p&gt;(I edited this question to make it more useful for everyone)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to make the keyboard of my Medion P2213T work I have to recompile the elementary kernel with just a very small adjustment, namely changing the value &lt;code&gt;HID_MAX_USAGES&lt;/code&gt; to &lt;code&gt;65536&lt;/code&gt; in &lt;code&gt;include/linux/hid.h&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried a &lt;a href=&quot;https://vuanhduy.wordpress.com/2014/05/03/recompiling-kernel-for-ubuntu-14-04-trusty-tahr/&quot; rel=&quot;nofollow&quot;&gt;tutorial&lt;/a&gt; for Ubuntu 14.04, I ended up with a working keyboard, but the new kernel had horrible performance even on the desktop...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question, is there an easy tutorial to recompile the kernel, known to work with the latest version of elementary OS freya?&lt;/p&gt;&#xA;" OwnerUserId="861" LastEditorUserId="3757" LastEditDate="2016-03-24T13:42:45.180" LastActivityDate="2016-03-24T13:42:45.180" Title="Easy &amp; safe way to recompile elementary kernel?" Tags="|release-freya|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1243" PostTypeId="2" ParentId="1242" CreationDate="2015-08-11T13:25:56.967" Score="7" Body="&lt;p&gt;The kernel should be identical to the Ubuntu 14.04's kernel. elementary is &lt;a href=&quot;http://blog.elementary.io/post/120736900431/how-much-of-elementary-os-is-just-ubuntu-gnome&quot; rel=&quot;nofollow&quot;&gt;built on on Ubuntu Minimal&lt;/a&gt;, so an Ubuntu tutorial should work just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, a &lt;a href=&quot;https://launchpad.net/ubuntu/+milestone/ubuntu-14.04.3&quot; rel=&quot;nofollow&quot;&gt;new version of the kernel&lt;/a&gt; is coming to Ubuntu 14.04 this month.&lt;br&gt;&#xA;That upgrade expands hardware support, so it might fix your problem!&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="242" LastEditDate="2015-08-13T17:18:29.250" LastActivityDate="2015-08-13T17:18:29.250" CommentCount="17" ContentLicense="CC BY-SA 3.0" />
  <row Id="1244" PostTypeId="1" CreationDate="2015-08-11T15:04:34.383" Score="-2" ViewCount="67" Body="&lt;p&gt;After I have installed elementary OS. The laptop seems to have some kind of lag and the touchpad also doesn´t work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CPU: AMD A10-5750M Quad-Core @ 2.50 Ghz&#xA;Graphics: Radeon HD Graphics&#xA;RAM: 6 GB&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help in advance.&lt;/p&gt;&#xA;" OwnerUserId="862" LastEditorUserId="26" LastEditDate="2015-08-11T15:44:42.963" LastActivityDate="2015-08-11T19:16:49.947" Title="I have some problems with OS beta. Help please" Tags="|release-freya|touchpad|" AnswerCount="1" CommentCount="1" ClosedDate="2015-08-12T01:42:09.130" ContentLicense="CC BY-SA 3.0" />
  <row Id="1245" PostTypeId="1" AcceptedAnswerId="1246" CreationDate="2015-08-11T16:20:33.157" Score="4" ViewCount="99" Body="&lt;p&gt;After enabling the Daily ppa, a second &quot;Network&quot; section appeared in System Settings. They look different inside.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I remove one of these?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dbQjR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dbQjR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="760" LastEditorUserId="45" LastEditDate="2015-08-11T17:28:42.507" LastActivityDate="2015-08-11T17:28:42.507" Title="Why do I have two &quot;Network&quot; sections in System Settings while running Daily?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1246" PostTypeId="2" ParentId="1245" CreationDate="2015-08-11T16:54:59.707" Score="5" Body="&lt;p&gt;&lt;strong&gt;You shouldn't remove either of these.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One is the &quot;daily&quot; plug, and is in the process of being built. As such, it is incomplete, both in that it may not have access to or be able to modify all the settings, and that it might be unstable in some situations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other is the &quot;stable&quot; plug, and contains the current, known-to-work code.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-08-11T16:54:59.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1248" PostTypeId="2" ParentId="1230" CreationDate="2015-08-11T18:43:49.200" Score="3" Body="&lt;p&gt;In order to use your theme you need to add and set an alternative for the default plymouth theme, and update the initrd image.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --install /lib/plymouth/themes/default.plymouth default.plymouth /lib/plymouth/themes/dell/dell.plymouth 75&#xA;sudo update-alternatives --set default.plymouth /lib/plymouth/themes/dell/dell.plymouth&#xA;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also test your theme without rebooting by using &lt;code&gt;plymouthd&lt;/code&gt; and &lt;code&gt;plymouth&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install plymouth-x11&#xA;sudo plymouthd&#xA;sudo plymouth show-splash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; Here's the slightly modified &lt;code&gt;dell.script&lt;/code&gt; that I used for testing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Window.SetBackgroundTopColor(0.91, 0.92, 0.91);&#xA;Window.SetBackgroundBottomColor(0.80, 0.80, 0.80);&#xA;&#xA;screen.width = Window.GetWidth();&#xA;screen.height = Window.GetHeight();&#xA;&#xA;dell.image = Image(&quot;wallpaper.png&quot;);&#xA;dell.width = dell.image.GetWidth();&#xA;dell.height = dell.image.GetHeight();&#xA;&#xA;if(dell.width &amp;lt; dell.height) {&#xA;  dell.ratio = screen.height / dell.height;&#xA;  dell.x = Math.Abs(screen.width - (dell.width * dell.ratio)) / 2;&#xA;  dell.y = 0;&#xA;} else {&#xA;  dell.ratio = screen.width / dell.width;&#xA;  dell.x = 0;&#xA;  dell.y = Math.Abs(screen.height - (dell.height * dell.ratio)) / 2;&#xA;}&#xA;&#xA;dell.scaled = dell.image.Scale(dell.width * dell.ratio, dell.height * dell.ratio);&#xA;dell.sprite = Sprite(dell.scaled);&#xA;dell.sprite.SetX(dell.x);&#xA;dell.sprite.SetY(dell.y);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-08-12T21:12:36.257" LastActivityDate="2015-08-12T21:12:36.257" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1249" PostTypeId="2" ParentId="1244" CreationDate="2015-08-11T19:16:49.947" Score="4" Body="&lt;p&gt;There's no beta version at the moment. There's only the stable Freya (0.3) version available on &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, install elementary OS from the official source. If the problems are still there, then see this: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How can I report an issue with elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-11T19:16:49.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1250" PostTypeId="2" ParentId="1241" CreationDate="2015-08-11T19:33:43.550" Score="19" Body="&lt;p&gt;This is due to &lt;a href=&quot;https://bugs.launchpad.net/scratch/+bug/1467564&quot;&gt;a permissions bug&lt;/a&gt; that occurs when the first time you've run Scratch is as a privileged user. You end up with a directory in &lt;code&gt;~/.local/share/scratch-text-editor&lt;/code&gt; that you don't own.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this issue:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure you don't have any unsaved files in Scratch when run as root (with the &lt;code&gt;sudo&lt;/code&gt; command). This fix will delete those files.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal and use root permissions to remove the directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf ~/.local/share/scratch-text-editor&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Scratch as your own user (do not use the &lt;code&gt;sudo&lt;/code&gt; command)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;After this, you should no longer encounter the issue. In general, you should not run graphical applications using the &lt;code&gt;sudo&lt;/code&gt; command since you can encounter these types of issues.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-08-13T18:08:04.887" LastActivityDate="2015-08-13T18:08:04.887" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1251" PostTypeId="1" CreationDate="2015-08-12T01:27:30.407" Score="2" ViewCount="757" Body="&lt;p&gt;I am having an issue with keeping the Intellij IDEA app on my dock. It's the same with google-chrome but I haven't found any easy way to get rid of it. Whenever I open up the application, a blurry second icon pops up, just like the google-chrome icon issue. If anybody could help me, that would be amazing. Thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The desktop file for this app is in &lt;code&gt;/usr/share/applications/jetbrains-idea.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The content is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Intellij IDEA&#xA;Icon=/opt/idea-IU-141.1532.4/bin/idea.png&#xA;Exec=&quot;/opt/idea-IU-141.1532.4/bin/idea.sh&quot; %f&#xA;Comment=Develop with pleasure!&#xA;Categories=Development;IDE;&#xA;Terminal=false&#xA;StartupWMClass=jetbrains-idea&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also tried putting a copy into &lt;code&gt;~/.local/share/applications&lt;/code&gt; but did not change anything. Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="868" LastEditorUserId="242" LastEditDate="2015-08-12T01:35:41.333" LastActivityDate="2015-08-12T09:25:51.600" Title="Intellij IDEA Blurry Second Icon on Plank" Tags="|release-freya|plank|app-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1252" PostTypeId="2" ParentId="1251" CreationDate="2015-08-12T01:47:11.767" Score="3" Body="&lt;p&gt;For some reason deleting the &lt;code&gt;StartupWMClass=jetbrains-idea&lt;/code&gt; from &lt;code&gt;/usr/share/applications&lt;/code&gt; and having the .desktop file with &lt;code&gt;StartupWMClass=jetbrains-idea&lt;/code&gt; at &lt;code&gt;~/.local/share/applications&lt;/code&gt; did the trick.&lt;/p&gt;&#xA;" OwnerUserId="869" LastEditorUserId="138" LastEditDate="2015-08-12T09:25:51.600" LastActivityDate="2015-08-12T09:25:51.600" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1255" PostTypeId="1" AcceptedAnswerId="1256" CreationDate="2015-08-12T12:38:45.420" Score="2" ViewCount="3166" Body="&lt;p&gt;I am trying to install OpenJDK 8 in Freya but I can't find in any repository. If I try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install openjdk-8-jdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to locate package&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And when I try to search it via &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-cache search jdk | grep 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I got no results. However version 7 is available in the repo. So do I need to add other repository in order to install Java 8?&lt;/p&gt;&#xA;" OwnerUserId="563" LastActivityDate="2015-08-12T12:56:11.080" Title="Cannot install OpenJDK 8" Tags="|release-freya|software-installation|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1256" PostTypeId="2" ParentId="1255" CreationDate="2015-08-12T12:56:11.080" Score="4" Body="&lt;p&gt;openjdk8 isn't in the trusty repositories therefore you will have to add another repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:openjdk-r/ppa&#xA;sudo apt-get update &#xA;sudo apt-get install openjdk-8-jdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2015/01/install-openjdk-8-ubuntu-14-04-12-04-lts/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2015/01/install-openjdk-8-ubuntu-14-04-12-04-lts/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19" LastActivityDate="2015-08-12T12:56:11.080" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1258" PostTypeId="1" CreationDate="2015-08-12T16:24:08.863" Score="3" ViewCount="65" Body="&lt;p&gt;I came from the Ubuntu family to this distro and so far I got everything setup and working just fine.  When I was considering making a purchase from the software center, it tells &quot;failure in the purcahse process&quot;  after the screen about &quot;connecting to payment service&quot;.  I dont see why this wont work.  &lt;/p&gt;&#xA;" OwnerUserId="875" LastActivityDate="2015-10-05T21:22:49.100" Title="Turning on recommendations and buying software in software center" Tags="|ubuntu|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1260" PostTypeId="1" AcceptedAnswerId="1262" CreationDate="2015-08-13T08:12:56.400" Score="1" ViewCount="332" Body="&lt;p&gt;I'm a construction engineer student, focusing on structural engineering. I'm looking for a new OS, and find elementary OS promising. I'm not sure though, if it suits my needs, which are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;run 2D and 3D CAD programms&lt;/li&gt;&#xA;&lt;li&gt;MS Office (basically Excel)&lt;/li&gt;&#xA;&lt;li&gt;synchronizing my iPod Classic (the music files are stored on a mobile hard-drive)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm aware of the fact, that I could use &quot;regular&quot; ubuntu-apps, but that would break the promising gui-concept.&#xA;I found winConn to run MS programms on ubuntu-based OS, but does it adapt the elementary look'n'feel ? Sometimes I have to open CAD-models out of excel-files and vice versa. Is such behaviour supported by winConn?(btw: how stable are winConn running apps any way?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Beside this I would like to automatically switch between my GPU and the onboard GPU and improve battery time in general.(I'm most likely going to buy myself a T450s with NVIDIA 940m and under Windows NVIDIA optimus takes this part. Is there a similar tool for elementary OS?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hard-Drive and mail encryption should be possible as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you guys think, elementary OS is a fitting OS ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ps: I would have asked the elementary developer team itself, but they only link to stack-exchange ;)&lt;/p&gt;&#xA;" OwnerUserId="881" LastEditorUserId="3757" LastEditDate="2016-05-06T14:29:04.170" LastActivityDate="2016-05-06T14:29:04.170" Title="Is elementary OS suiting my demands?" Tags="|music|office|" AnswerCount="1" CommentCount="3" ClosedDate="2015-08-13T17:17:19.120" ContentLicense="CC BY-SA 3.0" />
  <row Id="1262" PostTypeId="2" ParentId="1260" CreationDate="2015-08-13T09:54:45.823" Score="2" Body="&lt;p&gt;2D and 3D CAD: Yes, I would recommend FreeCAD!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MS Office: There are ways to use Microsoft Office with Linux but it runs really bad, have a look &lt;a href=&quot;https://appdb.winehq.org/appview.php?appId=31&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. I would recommend using &lt;a href=&quot;http://www.libreoffice.org/&quot; rel=&quot;nofollow&quot;&gt;LibreOffice&lt;/a&gt;, it is faster, has a clean UI and works great on elementary!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;iPod Classic synchronizing: There are many music players for linux that list iPod support as a feature, like Clementine, Amorak etc., but as I do not have an iPod I can't try it out by myself. Still, I am very sure you will find one that works!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most regular ubuntu apps look just fine with elementary!&#xA;If you have to open many proprietary formats, it might be a good idea to keep a small Windows partition just in case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full hard drive encryption is suppurted out of the box, you can set it up in the installation process. Email encryption is really easy to set up, all you need is Thunderbird and a plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would say: Go for it! :-)&lt;/p&gt;&#xA;" OwnerUserId="861" LastActivityDate="2015-08-13T09:54:45.823" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="1263" PostTypeId="1" CreationDate="2015-08-13T12:57:32.447" Score="4" ViewCount="3795" Body="&lt;p&gt;Elementary OS newbie here. I'm loving it so far! I've messed with the themes some what and I now have my notification background black and the text black. Makes it hard to see :(. I'm searching for the settings file to alter either the background color or the textColor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any insights? I've tried altering /usr/share/themes/elementary/gtk-3.0/apps.css but not having any luck there. It may just be my lack of css knowledge.&lt;/p&gt;&#xA;" OwnerUserId="885" LastEditorUserId="45" LastEditDate="2015-09-15T20:25:41.807" LastActivityDate="2015-09-30T11:43:59.023" Title="How can I change the Notification font color and/or background color?" Tags="|themes|notifications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1264" PostTypeId="1" AcceptedAnswerId="1323" CreationDate="2015-08-13T12:58:12.727" Score="3" ViewCount="1530" Body="&lt;p&gt;I am trying to provide a custom keyboard layout using the techniques outlined here: &lt;a href=&quot;http://domwatson.codes/2014/11/who-needs-capslock-anyway-part-2.html&quot; rel=&quot;nofollow&quot;&gt;http://domwatson.codes/2014/11/who-needs-capslock-anyway-part-2.html&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In short, I create a new layout under &lt;code&gt;/usr/share/X11/xkb/symbols/&lt;/code&gt; and then edit &lt;code&gt;/usr/share/X11/xkb/rules/evdev.xml&lt;/code&gt; to include the layout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I then go to select a keyboard layout, I expect my new layout to appear in list of layout choices, but it does not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug with the GUI tools that I may be able to work around by manually setting my layout? Or are keyboard layouts implemented differently and these xkb files ignored?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help appreciated.&lt;/p&gt;&#xA;" OwnerUserId="884" LastActivityDate="2017-02-27T14:17:55.110" Title="How to provide and select a custom keyboard layout (xkb methods failing)" Tags="|settings|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1265" PostTypeId="1" CreationDate="2015-08-13T13:07:01.363" Score="1" ViewCount="16" Body="&lt;p&gt;When I try to print a picture in a specific size, I can only set the dimensions to whole numbers like 19.00, not 18.50 or 19.2.&#xA;It's the same for cm and inches.&#xA;What can I do to make it work? Is this intended? Thanks for any help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://vid.me/89Au&quot; rel=&quot;nofollow&quot;&gt;Here is a video of it&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="886" LastEditorUserId="84" LastEditDate="2015-08-13T15:04:22.527" LastActivityDate="2015-08-13T15:04:22.527" Title="Can only specify whole numbers as dimensions for printing" Tags="|release-freya|printer|" AnswerCount="0" CommentCount="0" ClosedDate="2015-09-06T20:42:49.063" ContentLicense="CC BY-SA 3.0" />
  <row Id="1266" PostTypeId="2" ParentId="1263" CreationDate="2015-08-13T13:47:12.503" Score="2" Body="&lt;p&gt;Instead of trying to figure out, which CSS value is messed up, you could easily reinstall the elementary theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Don't forget to restart/relogin afterwards.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-13T14:47:04.903" LastActivityDate="2015-08-13T14:47:04.903" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1267" PostTypeId="1" CreationDate="2015-08-13T13:56:15.250" Score="3" ViewCount="407" Body="&lt;p&gt;For some reason, Gala is constantly using at least 90% of my CPU when only a few programs are running. It slows the whole computer down, and it's a constant pain to do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a GeForce 320M (MacBook Pro 7,1) with the latest proprietary drivers that I installed manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could it be an xorg.conf problem? If so, what do I need to edit?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="887" LastActivityDate="2015-08-13T13:56:15.250" Title="Gala constantly using 90%+ of CPU" Tags="|gala|cpu|" AnswerCount="0" CommentCount="0" ClosedDate="2015-08-17T20:46:17.223" ContentLicense="CC BY-SA 3.0" />
  <row Id="1268" PostTypeId="1" AcceptedAnswerId="1271" CreationDate="2015-08-13T16:49:36.543" Score="4" ViewCount="1543" Body="&lt;p&gt;As title says - when launching &quot;mc&quot; in Pantheon Terminal the F10 key (used to signal &quot;quit&quot; for mc) is not received.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Gnome Terminal has the option to disable the &quot;menu shortcut key F10&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a workaround or a configuration to change?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards,&#xA;SoftExpert&lt;/p&gt;&#xA;" OwnerUserId="888" LastEditorUserId="37" LastEditDate="2015-08-17T16:24:21.630" LastActivityDate="2017-07-10T11:42:36.360" Title="Cannot use F10 in command-line applications in Pantheon Terminal" Tags="|keyboard-shortcuts|command-line|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1269" PostTypeId="2" ParentId="1223" CreationDate="2015-08-13T17:01:21.443" Score="1" Body="&lt;p&gt;I think that this notification is started by the power management program, so if you want to delete it you can easily disable power management notification in &lt;strong&gt;Settings&lt;/strong&gt; → &lt;strong&gt;Notifications&lt;/strong&gt; → &lt;strong&gt;Power&lt;/strong&gt; → Disable bubbles and sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway with this method you will also lose notification bubble for low battery.&lt;/p&gt;&#xA;" OwnerUserId="772" LastEditorUserId="308" LastEditDate="2019-12-06T07:08:06.017" LastActivityDate="2019-12-06T07:08:06.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="1270" PostTypeId="2" ParentId="1223" CreationDate="2015-08-13T17:17:02.443" Score="1" Body="&lt;p&gt;You simply can't, because of the way the system is designed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The notification is not meant to be transient, because it's related to power management and therefore pretty critical for you to take action on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you lock the screen, the system cannot show anything from your user on the screen (above the lock screen), so this notification will wait until you've unlocked the system in order to pop up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think what you would need to do instead is to report a wishlist bug against the power manager with regards to the behaviour you would like to see.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-08-13T17:17:02.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1271" PostTypeId="2" ParentId="1268" CreationDate="2015-08-13T18:04:36.393" Score="5" Body="&lt;p&gt;To be able to use the F10 inside the terminal edit your settings.ini file  at &lt;code&gt;~/.config/gtk-3.0/settings.ini&lt;/code&gt; and add the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gtk-menu-bar-accel=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2015-08-17T11:39:19.070" LastActivityDate="2015-08-17T11:39:19.070" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="1272" PostTypeId="1" CreationDate="2015-08-13T18:41:54.417" Score="8" ViewCount="673" Body="&lt;p&gt;I'm trying to point the path to my Home directory to a folder located on another hard drive which is a ntfs partition where all my Windows documents are. I think this is the path to 'Documents':&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/media/charles/4ACE6B6ACE6B4D6F/Users/Charles/Documents&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I modified the path in &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DOCUMENTS_DIR=&quot;$HOME/media/charles/4ACE6B6ACE6B4D6F/Users/Charles/Documents&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After reboot it did not work; it was the same path as before. I tried to remove HOME like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DOCUMENTS_DIR=&quot;/media/charles/4ACE6B6ACE6B4D6F/Users/Charles/Documents&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also it did not work!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it because during the boot process elementary OS cannot mount this particular partition, so the OS cannot find the path in &lt;code&gt;user-dirs.dirs&lt;/code&gt;? &#xA;Or where else could be an error? In Ubuntu I use 'ubuntu tweak' for that purpose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kVpZK.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kVpZK.png&quot; alt=&quot;gparted, user-dirs, path to ntfs documents&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="890" LastEditorUserId="45" LastEditDate="2015-08-18T16:46:49.293" LastActivityDate="2015-08-18T16:46:49.293" Title="How can I keep my &quot;Documents&quot; directory on another disk partition?" Tags="|file-management|disk-management|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1273" PostTypeId="1" AcceptedAnswerId="1297" CreationDate="2015-08-13T19:19:20.067" Score="1" ViewCount="251" Body="&lt;p&gt;I just installed elementary OS Freya in a partition where the old elementary OS Luna used to be, but in grub I can't see the option to boot with Freya, but the old Luna one. When selecting this one the computer restarts again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The grub partition already existed because I have Ubuntu. I chose &lt;code&gt;/dev/sda8&lt;/code&gt; as the partition were elementary OS would be installed, but I wasn't really sure about this one. It's the same partition I chose for elementary to be installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So why is it missing in grub?&lt;/p&gt;&#xA;" OwnerUserId="891" LastEditorUserId="138" LastEditDate="2015-08-13T20:07:55.263" LastActivityDate="2015-08-15T17:50:38.037" Title="Freshly installed elementary OS Freya missing in boot menu" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1274" PostTypeId="2" ParentId="1272" CreationDate="2015-08-13T20:24:35.610" Score="0" Body="&lt;p&gt;User dirs must be in your home directory. In your case, it is best to make a symbolic link.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Give default &lt;code&gt;XDG_DOCUMENTS_DIR=&amp;quot;$HOME/Documenten&amp;quot;&lt;/code&gt; in the &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt;;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Remove &lt;code&gt;~/Documenten&lt;/code&gt; folder, if it exists;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create symlink with the following command:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;ln -s /media/charles/4ACE6B6ACE6B4D6F/Users/Charles/Documents ~/Documenten&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-13T20:24:35.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1275" PostTypeId="2" ParentId="1272" CreationDate="2015-08-13T21:03:07.477" Score="4" Body="&lt;p&gt;After modifying &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; you have to run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-user-dirs-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for the changes to take effect. If this doesn't work for you, try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-user-dirs-update --set DOCUMENTS /media/charles/4ACE6B6ACE6B4D6F/Users/Charles/Documents&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to explicitly set the documents folder to your desired path.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-14T08:47:22.127" LastActivityDate="2015-08-14T08:47:22.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1276" PostTypeId="1" AcceptedAnswerId="1279" CreationDate="2015-08-13T23:55:43.430" Score="16" ViewCount="13283" Body="&lt;p&gt;I'm having trouble running Eclipse Mars x64 on Elementary OS. I get to the splash screen and then my computer freezes I have to hard restart it. I'm using the Oracle JDK for Java 8.&lt;/p&gt;&#xA;" OwnerUserId="892" LastActivityDate="2017-06-04T03:27:46.997" Title="Eclipse Mars freezes after splash screen" Tags="|eclipse|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1278" PostTypeId="2" ParentId="1276" CreationDate="2015-08-14T07:09:12.767" Score="0" Body="&lt;p&gt;This is a known bug (see &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1452185&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;). Unfortunately there is no solution yet.&lt;/p&gt;&#xA;" OwnerUserId="34" LastEditorUserId="34" LastEditDate="2015-08-14T09:15:29.920" LastActivityDate="2015-08-14T09:15:29.920" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1279" PostTypeId="2" ParentId="1276" CreationDate="2015-08-14T08:27:48.713" Score="23" Body="&lt;p&gt;It's a bug in the SWT porting on GTK3. There is no real solution, but there is a workaround by forcing Eclipse to use GTK2. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume your Eclipse folder is &lt;code&gt;/opt/eclipse&lt;/code&gt; and that you don't have write permissions in this folder. Please change the commands, if your set-up differs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are two ways to apply this workaround, a long and explanatory way, and a short one for the lazy ;)&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;1. Modifying eclipse.ini by hand&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You need to open &lt;code&gt;eclipse.ini&lt;/code&gt; in your Eclipse folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /opt/eclipse/eclipse.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;--launcher.GTK_version&#xA;2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's important to add these lines before &lt;code&gt;--launcher.appendVmargs&lt;/code&gt;, otherwise Eclipse will crash.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;2. Using the command sed&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;An easier way to make these changes is to use &lt;code&gt;sed&lt;/code&gt;. Copy&amp;amp;pase this command in your terminal and press &lt;kbd&gt;Enter&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i '/--launcher.appendVmargs/ i \--launcher.GTK_version\n2' /opt/eclipse/eclipse.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Your Eclipse should work properly from now on.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-15T02:50:31.360" LastActivityDate="2015-08-15T02:50:31.360" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1281" PostTypeId="1" AcceptedAnswerId="1307" CreationDate="2015-08-14T16:53:40.467" Score="2" ViewCount="4405" Body="&lt;p&gt;Purchased a new Logitech MX mouse. This mouse requires &lt;a href=&quot;http://www.bluetooth.com/Pages/Bluetooth-Smart.aspx&quot; rel=&quot;nofollow&quot;&gt;Bluetooth Smart&lt;/a&gt; which is only available in BlueZ 5. Everything I have read in upgrading the packages breaks the current Bluetooth Manager&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPA Here: &lt;a href=&quot;https://launchpad.net/~vidplace7/+archive/ubuntu/bluez5&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/~vidplace7/+archive/ubuntu/bluez5&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions on how to upgrade?&lt;/p&gt;&#xA;" OwnerUserId="349" LastEditorUserId="45" LastEditDate="2015-08-14T17:21:18.233" LastActivityDate="2015-09-03T14:01:16.853" Title="How can I safely upgrade to BlueZ 5?" Tags="|release-freya|bluetooth|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1282" PostTypeId="1" CreationDate="2015-08-14T17:15:11.847" Score="3" ViewCount="1276" Body="&lt;p&gt;I would like to use x2go to connect to my Elementary OS machine, but don't know what session type or custom session to use.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/emoGy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/emoGy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="899" LastEditorUserId="45" LastEditDate="2015-08-14T17:22:32.580" LastActivityDate="2021-01-19T04:37:17.420" Title="How to connect to Elementary using X2GO?" Tags="|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1283" PostTypeId="1" CreationDate="2015-08-14T18:52:51.793" Score="11" ViewCount="4178" Body="&lt;p&gt;The basic stuff: I want to be able to switch apps with &lt;kbd&gt;⌘&lt;/kbd&gt;&lt;kbd&gt;Tab&lt;/kbd&gt;, copy and paste with &lt;kbd&gt;⌘&lt;/kbd&gt;&lt;kbd&gt;C&lt;/kbd&gt; and &lt;kbd&gt;⌘&lt;/kbd&gt;&lt;kbd&gt;V&lt;/kbd&gt; etc.&lt;/p&gt;&#xA;" OwnerUserId="793" LastEditorUserId="308" LastEditDate="2019-12-06T07:01:18.170" LastActivityDate="2021-07-25T20:23:57.003" Title="How can I set my keyboard layout up similar to macOS?" Tags="|keyboard|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="1284" PostTypeId="1" CreationDate="2015-08-14T19:06:10.727" Score="-2" ViewCount="280" Body="&lt;p&gt;Hello I have a Sony Vaio VGN-FE41S  laptop , with  a webcam Richoh. &#xA;Searching the Internet, use the driver r5u870 .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS Freya (Ubuntu) has not included.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can you add the module r5u870 ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="901" LastActivityDate="2015-08-15T09:59:58.713" Title="Sony Vaio VGN-FE41S (WebCam)" Tags="|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1285" PostTypeId="1" CreationDate="2015-08-14T20:44:39.810" Score="5" ViewCount="1176" Body="&lt;p&gt;If I'm on login screen the keyboard layout is always set to US and there's no option to chose a different. It says &quot;No other keyboard layout selectable&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gqs71.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gqs71.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is very annoying for password entering :/&#xA;If I'm logged in everything works as expected. Correct layout is selected automatically:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OAJ3h.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OAJ3h.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there maybe to define a default keyboard layout that will be applied to the login screen? I deleted the US english layout but this hadn't any effect on the login screen :(&lt;/p&gt;&#xA;" OwnerUserId="413" LastEditorUserId="15904" LastEditDate="2018-12-02T05:38:17.353" LastActivityDate="2018-12-02T05:38:17.353" Title="Keyboard on login screen (greeter) not changeable" Tags="|greeter|keyboard|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="1287" PostTypeId="1" AcceptedAnswerId="1296" CreationDate="2015-08-15T03:12:43.243" Score="3" ViewCount="948" Body="&lt;p&gt;I'm a totally beginner, but I am facing a crazy complicate problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Story:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I installed elementary OS next to my Windows 8 successfully on my Laptop.&lt;/li&gt;&#xA;&lt;li&gt;As a bloody beginner I did a unbelievable stupid mistake and deleted some important parts of the system. &lt;/li&gt;&#xA;&lt;li&gt;I still had saved all my Documents, i like elementary OS anyway more than windows, so I decided to reinstall elementary OS again, this time on my whole computer, I hoped to delete windows and the broken OS this way.&lt;/li&gt;&#xA;&lt;li&gt;I chose &quot;format everything and install elementary&quot; in the installing-menu.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;But now my laptop starts still with dual-boot-menu. Instead of choosing between windows and elementary OS, he ask if I want to start in elementary OS or elementary OS Freya, very weird. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I searched for help in the Internet and tried to ask in some&#xA;Linux-forums but as person that starts to learn the very basic&#xA;things about Linux and computer stuff in general just a week ago I&#xA;was lost. Somehow I didn't know for what I have to ask for and so I got&#xA;not-useful answers, somehow the answers was pretty complicate and&#xA;let me again alone.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Anyway I learned a lot so I try another question here, that hopefully lead me successfully to the solution.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;So that's my new question: I want to reinstall elementary OS again and format my &lt;em&gt;two&lt;/em&gt; harddisks. I want to use gparted in the installing-menu for that. How can I make sure that the new installed elementary OS will find both harddisks and use both?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how my harddisks are partitioned at the moment:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Model: ATA Hitachi HTS54505 (scsi)&#xA;  Disk /dev/sda: 500GB&#xA;  Sector size (logical/physical): 512B/4096B&#xA;  Partition Table: gpt&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Number  Start   End    Size    File system     Name  Flags&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;1      1049kB  538MB  537MB   fat32                 boot&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;2      538MB   496GB  495GB   ext4&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;3      496GB   500GB  4153MB  linux-swap(v1)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Model: ATA LITEONIT LMT-32L (scsi)&#xA;  Disk /dev/sdb: 32.0GB&#xA;  Sector size (logical/physical): 512B/512B&#xA;  Partition Table: gpt&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Number  Start   End     Size    File system     Name                  Flags&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;1      1049kB  8589MB  8588MB                  Basic data partition&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;2      8589MB  9127MB  538MB   fat32                                 boot&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;3      9127MB  27.9GB  18.7GB  ext4&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;4      27.9GB  32.0GB  4153MB  linux-swap(v1)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thank you very very much for your help, it would give me back all the fun with elementary, because in the moment it's mainly frustrating.&lt;/p&gt;&#xA;" OwnerUserId="903" LastEditorUserId="45" LastEditDate="2015-09-03T22:25:01.923" LastActivityDate="2015-09-03T22:25:01.923" Title="How to erase two times elementary OS from my harddisk and install elementary OS again" Tags="|release-freya|system-installation|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1288" PostTypeId="2" ParentId="1283" CreationDate="2015-08-15T05:15:48.960" Score="0" Body="&lt;p&gt;How about remapping the keys? &lt;a href=&quot;https://wiki.archlinux.org/index.php/Xmodmap&quot; rel=&quot;nofollow&quot;&gt;xmodmap&lt;/a&gt; should do the trick there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Assuming that your command button is replaced with meta (I can't help you there, I don't own a Mac) this should work for you:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xmodmap -e &quot;remove control = Control_L&quot;&#xA;xmodmap -e &quot;remove mod4 = Super_L&quot;&#xA;xmodmap -e &quot;add control = Super_L&quot;&#xA;xmodmap -e &quot;add mod4 = Control_L&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will work until you end your session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Permanent solution&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Make &lt;code&gt;~/.Xmodmap&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Write  this into it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;remove control = Control_L&#xA;remove mod4 = Super_L&#xA;add control = Super_L&#xA;add mod4 = Control_L&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) You should now somehow put &lt;code&gt;xmodmap ~/.Xmodmap&lt;/code&gt; to run at startup (I'm having trouble to find out how right now, will fix later).&lt;/p&gt;&#xA;" OwnerUserId="675" LastEditorUserId="675" LastEditDate="2015-08-15T06:16:30.153" LastActivityDate="2015-08-15T06:16:30.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1289" PostTypeId="1" CreationDate="2015-08-15T05:41:54.317" Score="3" ViewCount="332" Body="&lt;p&gt;Is it safe to change the elementary OS Luna/Freya login screen (&lt;code&gt;pantheon-greeter&lt;/code&gt;) to Ubuntu's LightDM &lt;code&gt;unity-greeter&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="905" LastEditorUserId="5565" LastEditDate="2016-10-03T07:20:09.597" LastActivityDate="2016-10-03T07:20:09.597" Title="Can I use unity-greeter in elementary OS?" Tags="|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1290" PostTypeId="2" ParentId="1284" CreationDate="2015-08-15T09:37:46.177" Score="2" Body="&lt;p&gt;It seems like there are unclear copyright issues regarding the webcam firmware.&lt;br&gt;&#xA;Installing the &lt;a href=&quot;https://launchpad.net/~r5u87x-loader/+archive/ubuntu/ppa/&quot; rel=&quot;nofollow&quot;&gt;firmware loader for cameras based on Ricoh R5U87x chipsets&lt;/a&gt; with the following steps may solve your problem: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:r5u87x-loader/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install r5u87x&#xA;sudo /usr/share/r5u87x/r5u87x-download-firmware.sh &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please create a backup before trying this solution, it also may break your system!&lt;/strong&gt; &lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-15T09:59:58.713" LastActivityDate="2015-08-15T09:59:58.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1291" PostTypeId="2" ParentId="1111" CreationDate="2015-08-15T10:18:40.453" Score="5" Body="&lt;p&gt;After a bit of tinkering I managed to get Elementary installed.This &lt;a href=&quot;https://github.com/skylerseverns/elementary-os-freya-uefi/blob/master/installing-elementary-os-freya.md&quot; rel=&quot;noreferrer&quot;&gt;very helpful guide&lt;/a&gt; walked me through installing Freya on a UEFI based system using the rEFInd boot manager instead of GRUB2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The DPI wasn't right after install, even though the resolution was set to 1920x1080. Running this command (mentioned in &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2d8qwm/freya_scaling_problem/&quot; rel=&quot;noreferrer&quot;&gt;this Reddit post&lt;/a&gt;) fixed the problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although now the DPI is a bit too high and it is difficult to make out writing. I'll investigate this further. But at least it is installed and running!&lt;/p&gt;&#xA;" OwnerUserId="778" LastActivityDate="2015-08-15T10:18:40.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1293" PostTypeId="1" CreationDate="2015-08-15T10:37:45.847" Score="2" ViewCount="2797" Body="&lt;p&gt;I've set up a bootable elementary OS USB Stick, and installed rEFInd under OS X 10.10.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reboot, I see the boot manager, and select my USB Stick afterwards. But then, I'm getting an error message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Error:&lt;/strong&gt; Not found while loading legacy folder&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I followed &lt;a href=&quot;http://www.elementarynow.com/dual-booting-elementary-os-and-osx/&quot; rel=&quot;nofollow&quot;&gt;these instructions&lt;/a&gt; on the elementarynow website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Did anybody has the same problems in the past? How can I get such a legacy folder?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="815" LastEditorUserId="34" LastEditDate="2015-09-03T20:48:59.220" LastActivityDate="2015-10-03T21:35:34.900" Title="Legacy folder not found while rEFInd booting under OS X" Tags="|dual-boot|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1294" PostTypeId="5" CreationDate="2015-08-15T12:54:06.847" Score="0" Body="&lt;p&gt;The official elementary OS website is &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow&quot;&gt;elementary.io&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="190" LastEditorUserId="5565" LastEditDate="2016-10-03T07:20:01.040" LastActivityDate="2016-10-03T07:20:01.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1295" PostTypeId="4" CreationDate="2015-08-15T12:54:06.847" Score="0" Body="For questions about elementary's official website, elementary.io. Please use a more specific tag for questions about the operating system (e.g., &quot;system-installation&quot;, &quot;applications&quot;, &quot;updates&quot;)." OwnerUserId="190" LastEditorUserId="5565" LastEditDate="2016-10-02T22:35:06.160" LastActivityDate="2016-10-02T22:35:06.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1296" PostTypeId="2" ParentId="1287" CreationDate="2015-08-15T17:33:38.347" Score="4" Body="&lt;p&gt;Short answer: Install elementary on the LITEON disk. Use the other disk for your personal files and swap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long answer:&#xA;The use of two different drives may seem complicated, but this is actually going to be very useful for you.&#xA;You have two different drives: the 32 GB Liteon is an &lt;strong&gt;SSD&lt;/strong&gt; and the 500 GB Hitachi is a more traditional &lt;strong&gt;HDD&lt;/strong&gt;. I suppose Windows was installed on the SSD: the reason is that while more expensive (hence the smaller size), an SDD is much faster. You want to install the OS and apps on an SDD to have fast loading times, and keep all you personal files on the HDD because of the larger space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, to partition your drive:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LITEONIT LMT-32L:&#xA;All the space in ext4 for the root of your system (choose &quot;/&quot; as mount point)&#xA;&#xA;Hitachi HTS54505&#xA;4153MB linux-swap&#xA;All the rest in ext4 for your personal files (choose &quot;/home&quot; as mount point)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If any of this seems complicated, or if you have further questions, &lt;strong&gt;or any doubts at all&lt;/strong&gt;, don't hesitate: ask for help. The amount of knowledge you need to use linux is pretty low, but the amount of knowledge you need to actually install linux is &lt;em&gt;insanely high&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For further reference:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="157" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-15T17:33:38.347" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1297" PostTypeId="2" ParentId="1273" CreationDate="2015-08-15T17:50:38.037" Score="1" Body="&lt;p&gt;Grub currently shows the old list of operating systems installed (hence the Luna boot option instead of Freya).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To show the updated list of entries, you have to refresh GRUB from the Ubuntu installation (or a Ubuntu Live Media) with the command &lt;code&gt;update-grub&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;em&gt;Thanks &lt;a href=&quot;https://elementaryos.stackexchange.com/users/138/r3bl&quot;&gt;@r3bl&lt;/a&gt; !&lt;/em&gt;)&lt;/p&gt;&#xA;" OwnerUserId="157" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-15T17:50:38.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1298" PostTypeId="2" ParentId="1293" CreationDate="2015-08-15T18:54:36.090" Score="1" Body="&lt;p&gt;&lt;a href=&quot;http://refit.sourceforge.net/doc/c4s1_notfound.html&quot; rel=&quot;nofollow&quot;&gt;This&lt;/a&gt; might resolve your issue:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Problem: When choosing a legacy operating system (e.g. Windows) from the rEFIt boot menu, you get an error message saying &quot;Error: Not found while loading legacy loader&quot;&#xA;&#xA;Solution: If you have a Mac Pro and are running rEFIt 0.7 or earlier, this is a known problem that is fixed in rEFIt 0.8. (This may also apply to other recent Core 2 Duo based models.)&#xA;&#xA;If you have another model of Intel Mac: To boot legacy operating systems on the iMac, MacBook Pro (15&quot;) or Mac mini, you need to install the firmware updates published together with Boot Camp. Here’s a table of the firmware versions as seen in System Profiler:&#xA;&#xA;(...)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="861" LastActivityDate="2015-08-15T18:54:36.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1300" PostTypeId="1" CreationDate="2015-08-15T19:19:48.563" Score="10" ViewCount="1855" Body="&lt;p&gt;Is there an easy way to let applications start automatically, like in Windows: simply put a link in the autostart folder, or enter the path and the name of the executable in the registry?&lt;/p&gt;&#xA;" OwnerUserId="908" LastEditorUserId="242" LastEditDate="2015-08-18T23:18:39.097" LastActivityDate="2015-08-18T23:18:39.097" Title="How can I let applications start up automatically while booting?" Tags="|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1301" PostTypeId="2" ParentId="1300" CreationDate="2015-08-15T19:41:17.980" Score="7" Body="&lt;p&gt;Sure there is!&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Applications&lt;/code&gt; -&gt; &lt;code&gt;Startup&lt;/code&gt; tab. &lt;/li&gt;&#xA;&lt;li&gt;Click on the &lt;code&gt;+&lt;/code&gt; icon in the lower left corner.&lt;/li&gt;&#xA;&lt;li&gt;Find the app you want.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Done!&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-08-15T19:41:17.980" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1302" PostTypeId="2" ParentId="1300" CreationDate="2015-08-15T19:42:09.717" Score="17" Body="&lt;h2&gt;Adding applications to autostart using the GUI&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Starting applications automatically in elementary OS is as easy as in Windows, if not even easier.  &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;em&gt;System Settings&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click at &lt;em&gt;Applications&lt;/em&gt; and switch to &lt;em&gt;Startup&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click at the + button in the lower left corner&lt;/li&gt;&#xA;&lt;li&gt;Choose your application or start typing it's name in the upper textfield. If it's a command, you would like to start, type it in the lower textfield&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SAIPw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SAIPw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Manually adding Applications to autostart&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;All autostart entries are being stored in &lt;code&gt;~/.config/autostart&lt;/code&gt;. The entries are basically &lt;code&gt;.desktop&lt;/code&gt; files.&lt;br&gt;&#xA;This is an example of my Insync autostart entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Insync&#xA;GenericName=Insync&#xA;Comment=Launch Insync&#xA;Icon=insync&#xA;Categories=Network;&#xA;Exec=insync start&#xA;TryExec=insync&#xA;Terminal=false&#xA;X-GNOME-Autostart-Delay=3&#xA;X-GNOME-Autostart-enabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The only difference are the last two lines. &lt;code&gt;X-GNOME-Autostart-Delay&lt;/code&gt; adds a delay in seconds, and &lt;code&gt;X-GNOME-Autostart-enabled&lt;/code&gt; decides if this application is enabled or disabled as autostart entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of using the GUI, you can copy the &lt;code&gt;.desktop&lt;/code&gt; file of your desired autostart application from &lt;code&gt;/usr/share/applications/&lt;/code&gt; or &lt;code&gt;~/.local/share/applications/&lt;/code&gt; and add the two missing lines by hand.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-16T21:33:41.303" LastActivityDate="2015-08-16T21:33:41.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1304" PostTypeId="1" CreationDate="2015-08-15T20:57:44.353" Score="4" ViewCount="635" Body="&lt;p&gt;My friend lent me a pen-drive, and it worked in 2 different PCs, but not in mine. Well, when I press install, it goes to a screen with the elementary logo, but it freezes there. So the error is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; [   13.257876] ieee80211 phy0: rt2800_probe_rt: Error - Invalid RT chipset 0xffff, rev ffff detected&#xA; [   13.257876] ieee80211 phy0: rt2x00lib_probe_dev: Error - Failed to alocate device&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My PC config is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;          Processor: Intel(R) Core(TM) i3-2100 CPU @ 3.10GHz (4 CPUs), ~3.1GHz&#xA;             Memory: 4096MB RAM  Card name: NVIDIA GeForce 9800 GT (Microsoft Corporation - WDDM v1.1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="912" LastEditorUserId="3757" LastEditDate="2016-05-07T04:22:52.400" LastActivityDate="2018-12-15T18:01:55.370" Title="Can't install elementary OS" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1306" PostTypeId="2" ParentId="1285" CreationDate="2015-08-16T07:27:52.113" Score="1" Body="&lt;p&gt;Try &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1226/change-login-language-manually&quot;&gt;this&lt;/a&gt; advice, changing the language code to what you need (I guess German?):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Type in terminal:&#xA;&#xA;localectl set-locale &quot;LANG=de_DE.utf8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="861" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-16T07:27:52.113" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1307" PostTypeId="2" ParentId="1281" CreationDate="2015-08-16T07:59:29.427" Score="1" Body="&lt;p&gt;A few days ago I was able successfully get bluez5 working on my Freya laptop so I could use my new Microsoft Arc bluetooth mouse on it. Here is what I did:&lt;/p&gt;&#xA;&lt;p&gt;Grab the bluez package named &lt;em&gt;5.23-1ubuntu1~mtrudel1&lt;/em&gt; and &lt;em&gt;indicator-bluetooth&lt;/em&gt; from the &lt;a href=&quot;https://launchpad.net/%7Eubuntu-desktop/+archive/ubuntu/transitions&quot; rel=&quot;nofollow noreferrer&quot;&gt;following PPA&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You need to modify the bluez package and remove the dependencies &lt;em&gt;init-system-helpers&lt;/em&gt; and &lt;em&gt;lsb-base&lt;/em&gt;, otherwise you're going to have some dependency issues the next time you perform a system update.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dpkg-deb -x bluez_5.23-1ubuntu1-mtrudel1_amd64.deb dir_tmp&lt;/p&gt;&#xA;&lt;p&gt;dpkg-deb --control bluez_5.23-1ubuntu1-mtrudel1_amd64.deb dir_tmp/DEBIAN&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Go into the dir_tmp/DEBIAN folder and you open the control file.&#xA;Delete the dependencies from the &amp;quot;Depends&amp;quot; line. Then you can repackage the modified deb file with the following command:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dpkg -b dir_tmp/ modded_bluez_package.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Manually install the modified &lt;em&gt;bluez5&lt;/em&gt; package as well as &lt;em&gt;indicator-bluetooth&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Download and install the 2.0.1 version of &lt;em&gt;blueman&lt;/em&gt; from &lt;a href=&quot;https://packages.debian.org/search?keywords=blueman&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. If it gives you an dependency problems then remove them from the package in the same manner you used to modify the bluez package.&lt;/p&gt;&#xA;&lt;p&gt;After these 3 packages are installed, reboot your system. You should then see the new bluetooth indicator icon in the panel. Open it up and setup your Arc Touch mouse. It should pair and connect without any problem.&lt;/p&gt;&#xA;&lt;p&gt;To solve some auto reconnect issues I was having, I had to install the 14.04.3 LTS stack that was recently released.&lt;/p&gt;&#xA;" OwnerUserId="916" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-16T23:15:41.057" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1309" PostTypeId="1" AcceptedAnswerId="1310" CreationDate="2015-08-16T08:12:17.647" Score="6" ViewCount="78" Body="&lt;p&gt;With GNOME celebrating its 18th birthday yesterday, I was wondering how old is elementary project actually? When was Jupiter released? The only info I could find is March 2011 (from Wikipedia), but that's not really specific.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="5565" LastEditDate="2016-10-06T02:18:06.857" LastActivityDate="2016-10-06T02:18:06.857" Title="How old is elementary OS?" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1310" PostTypeId="2" ParentId="1309" CreationDate="2015-08-16T08:12:17.647" Score="3" Body="&lt;h3&gt;elementary: 6 years&lt;/h3&gt;&#xA;&#xA;&lt;h3&gt;elementary OS: 4 and a half years&lt;/h3&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;We released Jupiter on March 31st, 2011. But, elementary icons was registered on Launchpad as far back as June 6th, 2009. So we’ve been around in one form or another for quite a while :)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.elementary.io/post/126786393856/how-old-is-elementarys-project-on-which-date-was?utm_medium=email&amp;amp;utm_source=html&amp;amp;utm_campaign=ask_answer&quot; rel=&quot;nofollow&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="26" LastEditDate="2015-08-16T08:14:59.270" LastActivityDate="2015-08-16T08:14:59.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1311" PostTypeId="1" AcceptedAnswerId="2495" CreationDate="2015-08-16T08:25:17.367" Score="3" ViewCount="1792" Body="&lt;p&gt;My laptop's keyboard is half functional (literally, like half of the keys don't work), so I'm forced to use an external keyboard. However, since it doesn't have an &lt;kbd&gt;Fn&lt;/kbd&gt; key (obviously), I want to create a custom keyboard shortcut to change the brightness up and down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, what command should I execute to change the brightness up or down? I want to create a custom keyboard shortcut for these commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; I should point out that I took a look at the default keyboard shortcuts and found nothing to help me out.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-13T07:15:20.267" Title="Which command should I execute to change the brightness?" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1312" PostTypeId="1" AcceptedAnswerId="1343" CreationDate="2015-08-16T08:53:48.737" Score="2" ViewCount="858" Body="&lt;p&gt;When I try to run the lollypop music player, I get the following error &quot;Lollypop isn't designed to work without an unicode locale. Please fix your system&quot;. How to solve this?&lt;a href=&quot;https://i.stack.imgur.com/2caI3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2caI3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: My etc/default/locale file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  `LANG=&quot;en_IN&quot;&#xA;   LANGUAGE=&quot;en_IN:en&quot;`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="420" LastEditorUserId="420" LastEditDate="2015-08-17T10:36:48.560" LastActivityDate="2015-08-17T19:23:31.890" Title="Unicode locale error while running lollypop music player" Tags="|music|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1313" PostTypeId="1" CreationDate="2015-08-16T09:57:50.260" Score="2" ViewCount="313" Body="&lt;p&gt;Do you know if there are compatibility problems between elementary OS (Freya) and NVIDIA GTX980?&#xA;I've installed elementary OS but it's hard to use it. I've to plug two screens (one on the GTX and the other on on the motherboard's HDMI output). The MB BIOS is displayed via GTX's screen, and when elementary OS boots, it switches on the MB's screen.&#xA;I don't know why.&lt;/p&gt;&#xA;" OwnerUserId="917" LastEditorUserId="3757" LastEditDate="2016-05-06T14:17:38.200" LastActivityDate="2016-05-06T14:17:38.200" Title="Problem with NVIDIA GTX 980 and elementary OS" Tags="|nvidia|" AnswerCount="2" CommentCount="1" ClosedDate="2015-08-17T20:41:47.867" ContentLicense="CC BY-SA 3.0" />
  <row Id="1315" PostTypeId="1" CreationDate="2015-08-16T10:12:27.740" Score="2" ViewCount="1857" Body="&lt;p&gt;I would like to use &lt;a href=&quot;http://guichaz.free.fr/gliv/&quot; rel=&quot;nofollow&quot;&gt;GLiv&lt;/a&gt; (an OpenGL image viewer) as standard action by clicking at pictures.&lt;br&gt;&#xA;How do I manage this?&lt;/p&gt;&#xA;" OwnerUserId="908" LastEditorUserId="45" LastEditDate="2015-08-16T17:42:13.727" LastActivityDate="2015-08-16T17:42:13.727" Title="How can I choose different default apps?" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1316" PostTypeId="2" ParentId="1311" CreationDate="2015-08-16T10:13:03.677" Score="2" Body="&lt;p&gt;You can use &lt;code&gt;xdotool&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xdotool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then control the brightness by executing &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool key XF86MonBrightnessDown&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for decreasing and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool key XF86MonBrightnessUp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for increasing. There are alternate options to change screen brightness but mostly they need root privileges and if you are trying to have key bindings, entering your password each time on an intermediate pop-up screen can be a bummer. You create custom keyboard shortcuts for these in systems setting (System Settings -&gt; Keyboard -&gt; Shortcuts -&gt; Custom) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UimWj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UimWj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;by pressing the &lt;code&gt;+&lt;/code&gt; button at the bottom and inserting your command and its corresponding keyboard shortcut. You should log out and log back in for the effect to take place. &lt;/p&gt;&#xA;" OwnerUserId="621" LastEditorUserId="621" LastEditDate="2015-08-16T10:19:27.477" LastActivityDate="2015-08-16T10:19:27.477" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1317" PostTypeId="1" CreationDate="2015-08-16T11:03:31.637" Score="2" ViewCount="977" Body="&lt;p&gt;I am trying to install Elementary OS Freya but I keep running into an error. I use a USB for the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the system boots I get an error stating&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unknown chipset: 0x124000a1&#xA;Failed to create 0x80000080, -22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried the suggestions found in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1021/problem-with-nouveau-cant-install&quot;&gt;this&lt;/a&gt; question but it did not help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system specs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel Core i5-4690K&lt;/li&gt;&#xA;&lt;li&gt;Nvidia GeForce GTX 980&lt;/li&gt;&#xA;&lt;li&gt;Samsung Evo 850 1TB&lt;/li&gt;&#xA;&lt;li&gt;Gigabyte Z97-D3H-CF&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I also tried the latest version of Ubuntu and the problem does not exist there.&lt;/p&gt;&#xA;" OwnerUserId="919" LastEditorUserId="919" LastEditDate="2015-08-16T11:13:12.143" LastActivityDate="2016-02-12T19:18:53.403" Title="Unknown chipset error when installing" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1318" PostTypeId="2" ParentId="1315" CreationDate="2015-08-16T11:28:25.930" Score="10" Body="&lt;p&gt;GLiv is an outdated piece of software (last update was back in 2011), which doesn't follow standards of modern Linux desktops. Therefore it lacks proper desktop integration in elementary OS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even Guillaume Chazarain, the creator of GLiv, suggest at the &lt;a href=&quot;http://guichaz.free.fr/gliv/&quot; rel=&quot;noreferrer&quot;&gt;official GLiv homepage&lt;/a&gt; to switch to another picture viewer:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Note that gliv-1.9.7 is probably the last release of GLiv. Other image&#xA;  viewers like Eye of GNOME are now sufficiently fast that I don’t use&#xA;  GLiv anymore. There will be new releases only if I receive bug&#xA;  reports.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I'd suggest you follow his advice and pick another application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually it's very easy to choose another picture viewer. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;em&gt;System Settings&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click at &lt;em&gt;Applications&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose another installed &lt;em&gt;Image Viewer&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oOQF4.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oOQF4.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-08-16T11:38:49.283" LastActivityDate="2015-08-16T11:38:49.283" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1319" PostTypeId="1" CreationDate="2015-08-16T15:15:17.340" Score="5" ViewCount="758" Body="&lt;p&gt;Since I installed Freya on my PC every screenshot I take using 'print screen' key is black. I also tried using 'import' command with different options, but it only made opened windows visible on the images and my desktop was black. I had the newest AMD drivers installed from AMD website. My graphics card is Radeon R7 250x. The only solution I found on the internet was to &lt;a href=&quot;https://allienworks.net/2015/elementary-os-freya-amd-drivers/&quot;&gt;upgrade kernel to new version and install AMD open source drivers&lt;/a&gt; and I updated kernel to 3.17 and installed the drivers, but it didn't help. I tried upgrading to kernel 4.0 and 4.1, but then I got black screen after boot. So now I'm using kernel 3.17 and AMD open source drivers and I still have this issue - all my screenshots appear black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS My display is not recognized by the system. Could this be the cause?&lt;/p&gt;&#xA;" OwnerUserId="827" LastEditorUserId="3757" LastEditDate="2016-04-23T05:55:03.510" LastActivityDate="2016-04-23T05:55:03.510" Title="Black screenshots on elementary OS Freya x64 with AMD graphics drivers" Tags="|release-freya|graphic-drivers|screenshot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1320" PostTypeId="1" CreationDate="2015-08-16T15:38:46.023" Score="2" ViewCount="1635" Body="&lt;p&gt;In fact the menu is open, but it's clear I can not see it, because I give the SUPER + SPACE command and write the name of a program and press enter, the program opens.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Português:&lt;/strong&gt;&lt;br&gt; De fato, o menu é aberto, mas eu não posso&#xA;  vê-lo, porque eu dou o comando SUPER + ESPAÇO e escrevo o nome de um&#xA;  programa e pressiono enter, o programa abre.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="923" LastEditorUserId="923" LastEditDate="2015-08-16T16:35:34.310" LastActivityDate="2015-08-16T16:35:34.310" Title="The &quot;Applications&quot; menu does not open" Tags="|applications|" AnswerCount="1" CommentCount="1" ClosedDate="2015-08-17T16:33:24.910" ContentLicense="CC BY-SA 3.0" />
  <row Id="1321" PostTypeId="2" ParentId="1317" CreationDate="2015-08-16T16:15:21.990" Score="1" Body="&lt;p&gt;Your problem has probably already been answered in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1021/problem-with-nouveau-cant-install&quot;&gt;this post&lt;/a&gt;.&lt;br&gt;&#xA;(Could anyone more knowledgable regarding kernel modules and drivers please confirm these two problems are the same?)&lt;/p&gt;&#xA;" OwnerUserId="157" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-16T16:15:21.990" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1322" PostTypeId="2" ParentId="1320" CreationDate="2015-08-16T16:34:34.117" Score="1" Body="&lt;p&gt;I had enabled hot corner in the top left corner, so that was the first movement to the position of the apps menu was opened several times causing an error in the application menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SOLUTION&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I disabled the hot corner in the top left corner.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Português:&lt;/strong&gt;&lt;br&gt;&#xA;  Eu havia habilitado hot corners no canto superior esquerdo, isso fazia &#xA;  que com o primeiro movimento para a posição do menu de aplicativos&#xA;  fosse aberta varias vezes causando um erro no menu de aplicações.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;SOLUÇÂO&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Desabilitei o hot corners no canto superior esquerdo.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="923" LastActivityDate="2015-08-16T16:34:34.117" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1323" PostTypeId="2" ParentId="1264" CreationDate="2015-08-16T17:42:30.270" Score="2" Body="&lt;p&gt;I think this is a problem with the GUI. Currently elementary has a hard coded list of keyboard settings that comes from the default xkb files, it will not look for new ones or reload the default file (evdev.xml). Maybe you will be able to switch to your layout on the command line by using &lt;code&gt;setxkbmap your_layout&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it could be more clever about handling this sort of cases than having a hard coded list, but currently it hasn't been implemented.&lt;/p&gt;&#xA;" OwnerUserId="146" LastEditorUserId="146" LastEditDate="2015-08-22T16:30:02.473" LastActivityDate="2015-08-22T16:30:02.473" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1324" PostTypeId="1" AcceptedAnswerId="1327" CreationDate="2015-08-16T17:50:23.910" Score="0" ViewCount="533" Body="&lt;p&gt;I checked every tutorial, checked every solution on this web site and i am so disappointed to say that there is no built in solution or addon to prevent system from locking or suspending. So my question is why is that? I see this trend in every linux distro, but at least at some of them caffeine works, which is pathetic solution to start of. That said, hats off to Caffeine developer/s.&lt;/p&gt;&#xA;" OwnerUserId="924" LastActivityDate="2015-08-16T18:56:51.167" Title="NOTHING works to prevent screen locking while watching videos" Tags="|release-freya|applications|display|" AnswerCount="1" CommentCount="0" ClosedDate="2015-08-17T16:33:45.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="1325" PostTypeId="2" ParentId="1186" CreationDate="2015-08-16T17:58:08.467" Score="2" Body="&lt;p&gt;First, we can check which version of Files you currently have (and where you're getting it from) with the following Terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should see some information like the version you have installed, the version that's available to be installed, and versions that are available from your various software sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We can see &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-files/trunk/changes/1902?start_revid=1922&quot; rel=&quot;nofollow&quot;&gt;here in Launchpad&lt;/a&gt; that the Recent feature was merged in at revision 1892. As of this writing, the version available in the daily PPA is revision 1922. You can see this inside the version string. First it contains the milestone version &lt;code&gt;0.2.2.1&lt;/code&gt; then it says &lt;code&gt;+r1922&lt;/code&gt; which refers to the revision number in &lt;code&gt;bzr&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you saw that Files is available from the daily PPA when you ran &lt;code&gt;apt-cache&lt;/code&gt;, but it was a previous revision number you can try updating your software sources with the following command: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you didn't see the daily PPA in your sources, you might want to make sure you have actually added it. &lt;strong&gt;Be warned that this is an unstable software source and it is intended for developers. You may experience breakage by using it.&lt;/strong&gt; You can use the following commands to add it and refresh your software sources:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At this point, you should definitely see the latest revision of Files available from the Daily PPA when you run &lt;code&gt;apt-cache&lt;/code&gt; with the above arguments. You can update through either the regular Software Updater app or with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-16T17:58:08.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1327" PostTypeId="2" ParentId="1324" CreationDate="2015-08-16T18:56:51.167" Score="6" Body="&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt-get update&#xA;sudo apt-get install caffeine-plus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It works fine on Freya.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-08-16T18:56:51.167" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1328" PostTypeId="1" CreationDate="2015-08-16T19:11:34.960" Score="1" ViewCount="95" Body="&lt;p&gt;The Display brightness control shows up again (along with the choice to Dim the screen brightness), IF i plug my battery into the laptop.&#xA;I probably haven't noticed before.&#xA;In the case that the battery is NOT present,these controls are gone.&#xA;Is this normal behaviour?&#xA;If this is normal behaviour,is there a way to have these controls back,even if the battery is not present?&#xA;Is there some way to have them constantly showing up?&#xA;Thanks in advance and congrats to the Team for this outstanding distro!!&lt;/p&gt;&#xA;" OwnerUserId="928" LastEditorUserId="928" LastEditDate="2015-08-16T20:06:26.987" LastActivityDate="2015-08-16T20:06:26.987" Title="System Setting's display brightness control disappearing when laptop battery is not present" Tags="|settings|system|" AnswerCount="0" CommentCount="1" ClosedDate="2015-08-17T17:16:31.873" ContentLicense="CC BY-SA 3.0" />
  <row Id="1331" PostTypeId="2" ParentId="1090" CreationDate="2015-08-16T23:11:34.760" Score="8" Body="&lt;p&gt;I know this question has been answered but it seems one of the most important items was not addressed; if you have a standard HDD it will by default be constantly spinning, I used the Disks applications to turn on the HDD spind down and APM, made a huge difference right off the bat.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PiTyR.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PiTyR.png&quot; alt=&quot;Open Disks &amp;gt; Select drive &amp;gt; Click the gear &amp;gt; enable Standby and APM&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="349" LastActivityDate="2015-08-16T23:11:34.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1332" PostTypeId="1" CreationDate="2015-08-16T23:27:37.823" Score="1" ViewCount="35" Body="&lt;p&gt;Title says it all, my computer goes to sleep like normal, opens a crisp login screen. When I log in, pantheon goes to the lowest resolution. I have control of the cursor, but nothing responds to a click. Have to fully discharge the computer and reboot to fix the issue. This is a 3 day old installation, and nothing has been messed with.&lt;/p&gt;&#xA;" OwnerUserId="931" LastActivityDate="2015-08-16T23:27:37.823" Title="Resolution Issues &amp; Non Responsive Computer After Logging In From Locked OS" Tags="|release-freya|greeter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1333" PostTypeId="2" ParentId="1313" CreationDate="2015-08-16T23:30:16.667" Score="0" Body="&lt;p&gt;Try using non open source drivers. Either obtained under &quot;proprietary settings&quot; in Software centers preferences, or from the geforce website. I may note that I've personally noticed that installing prop. drivers is a total asspain.&lt;/p&gt;&#xA;" OwnerUserId="931" LastActivityDate="2015-08-16T23:30:16.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1334" PostTypeId="1" CreationDate="2015-08-17T00:19:05.177" Score="3" ViewCount="1234" Body="&lt;p&gt;When I try to login to Freya, the screen bounces when I entered the password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I go to a console terminal (using CTRL+ALT+F1), I can login OK.&#xA;There must be something wrong in my configuration preventing me to login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried creating a new user and the same thing happens : I can not login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas, any one ?&lt;/p&gt;&#xA;" OwnerUserId="932" LastActivityDate="2015-08-17T10:13:19.560" Title="I can't login into freya" Tags="|release-freya|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1335" PostTypeId="1" CreationDate="2015-08-17T01:38:13.053" Score="2" ViewCount="698" Body="&lt;p&gt;I am triple-booting with Windows 7, Linux Mint and Freya.&#xA;I installed BURG (&lt;a href=&quot;http://www.unixmen.com/how-to-install-burg-boot-loader-in-ubuntu-1304-and-linuxmint/&quot; rel=&quot;nofollow&quot;&gt;http://www.unixmen.com/how-to-install-burg-boot-loader-in-ubuntu-1304-and-linuxmint/&lt;/a&gt;) and Super-Boot-Manager (SBM).&#xA;Everything works, but the entry for elementary OS has a question mark icon.&#xA;And none of the themes I installed with SBM do the trick about it.&#xA;How do I add an icon for Elementary?&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="933" LastEditorUserId="3757" LastEditDate="2016-04-25T07:46:48.563" LastActivityDate="2016-04-25T07:46:48.563" Title="Elementary OS Freya icon not showing up in BURG bootloader" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2019-12-08T04:17:42.930" ContentLicense="CC BY-SA 3.0" />
  <row Id="1336" PostTypeId="1" CreationDate="2015-08-17T06:10:12.680" Score="2" ViewCount="5394" Body="&lt;p&gt;I'd like to swap out the wingpanel at the top of the elementary screen with the XFCE motif.  Can someone direct me on how to do this?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="458" LastEditorUserId="3757" LastEditDate="2016-05-05T09:02:35.500" LastActivityDate="2016-08-18T14:23:01.913" Title="Install XFCE in elementary OS?" Tags="|settings|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1337" PostTypeId="2" ParentId="289" CreationDate="2015-08-17T07:06:26.883" Score="1" Body="&lt;p&gt;I use elementary OS freya and there is a GUI app for powermanagement. Remove all instances of sleep, suspend and hibernate. You can leave turn the display off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That disables automatical suspend, but  will leave the manual suspend up in the menu in the right upper corner.&#xA;Mbr Patte&lt;/p&gt;&#xA;" OwnerUserId="929" LastEditorUserId="19" LastEditDate="2015-08-17T13:59:28.173" LastActivityDate="2015-08-17T13:59:28.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1338" PostTypeId="1" CreationDate="2015-08-17T07:15:10.050" Score="1" ViewCount="143" Body="&lt;p&gt;I am having a bit of a hard time getting the drivers for my rocketraid 642L controller to work on here (shortly after fixing all the graphics card driver issues..) After installing the drivers and turning on my enclosure it will no longer boot. However, booting with the enclosures off will.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Aug 16 23:13:46 ares kernel: [  322.929671] rr640l:RocketRAID 640L/642L/644L/RR644LS SATA controller driver v1.3.9&#xA;Aug 16 23:13:47 ares kernel: [  323.350828] rr640l:adapter at PCI 9:0:0, IRQ 99&#xA;Aug 16 23:13:48 ares kernel: [  323.574289] rr640l:[0 0  ] start port.&#xA;Aug 16 23:13:48 ares kernel: [  323.574290] rr640l:[0 0  ] start port hard reset (probe 1).&#xA;Aug 16 23:13:48 ares kernel: [  323.772517] rr640l:[0 1  ] start port.&#xA;Aug 16 23:13:48 ares kernel: [  323.772518] rr640l:[0 1  ] start port hard reset (probe 1).&#xA;Aug 16 23:13:48 ares kernel: [  323.970746] rr640l:[0 2  ] start port.&#xA;Aug 16 23:13:48 ares kernel: [  323.970746] rr640l:[0 2  ] start port hard reset (probe 1).&#xA;Aug 16 23:13:48 ares kernel: [  324.168973] rr640l:[0 3  ] start port.&#xA;Aug 16 23:13:48 ares kernel: [  324.168973] rr640l:[0 3  ] start port hard reset (probe 1).&#xA;Aug 16 23:13:51 ares kernel: [  326.774267] rr640l:[0 0  ] start port soft reset (probe 1).&#xA;Aug 16 23:13:51 ares kernel: [  327.421629] rr640l:[0 1  ] start port soft reset (probe 1).&#xA;Aug 16 23:13:52 ares kernel: [  328.244796] rr640l:[0 0  ] pmp attached: vendor 0x1b4b device 0x9715.&#xA;Aug 16 23:13:52 ares kernel: [  328.244799] rr640l:[0 2  ] failed to hard reset.&#xA;Aug 16 23:13:52 ares kernel: [  328.244804] rr640l:[0 2  ] failed to perform port hard reset.&#xA;Aug 16 23:13:52 ares kernel: [  328.268781] rr640l:[0 1  ] pmp attached: vendor 0x1b4b device 0x9715.&#xA;Aug 16 23:13:52 ares kernel: [  328.444615] rr640l:[0 3  ] failed to hard reset.&#xA;Aug 16 23:13:52 ares kernel: [  328.444621] rr640l:[0 3  ] failed to perform port hard reset.&#xA;Aug 16 23:13:55 ares kernel: [  331.469674] ata12.00: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.469676] ata12.01: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.469677] ata12.02: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.469677] ata12.03: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.469678] ata12.04: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.469680] ata12.15: exception Emask 0x4 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469682] ata12.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469683] ata12.00: failed command: CHECK POWER MODE&#xA;Aug 16 23:13:55 ares kernel: [  331.469685] ata12.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 23&#xA;Aug 16 23:13:55 ares kernel: [  331.469685]          res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)&#xA;Aug 16 23:13:55 ares kernel: [  331.469686] ata12.00: status: { DRDY }&#xA;Aug 16 23:13:55 ares kernel: [  331.469687] ata12.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469688] ata12.01: failed command: CHECK POWER MODE&#xA;Aug 16 23:13:55 ares kernel: [  331.469690] ata12.01: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 24&#xA;Aug 16 23:13:55 ares kernel: [  331.469690]          res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)&#xA;Aug 16 23:13:55 ares kernel: [  331.469690] ata12.01: status: { DRDY }&#xA;Aug 16 23:13:55 ares kernel: [  331.469691] ata12.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469692] ata12.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469693] ata12.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.469695] ata12.15: hard resetting link&#xA;Aug 16 23:13:55 ares kernel: [  331.557576] ata11.00: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.557578] ata11.01: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.557579] ata11.02: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.557579] ata11.03: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.557580] ata11.04: failed to read SCR 1 (Emask=0x40)&#xA;Aug 16 23:13:55 ares kernel: [  331.557582] ata11.15: exception Emask 0x4 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557583] ata11.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557584] ata11.00: failed command: CHECK POWER MODE&#xA;Aug 16 23:13:55 ares kernel: [  331.557586] ata11.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 15&#xA;Aug 16 23:13:55 ares kernel: [  331.557586]          res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)&#xA;Aug 16 23:13:55 ares kernel: [  331.557587] ata11.00: status: { DRDY }&#xA;Aug 16 23:13:55 ares kernel: [  331.557588] ata11.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557589] ata11.01: failed command: CHECK POWER MODE&#xA;Aug 16 23:13:55 ares kernel: [  331.557590] ata11.01: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 14&#xA;Aug 16 23:13:55 ares kernel: [  331.557590]          res 40/00:ff:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)&#xA;Aug 16 23:13:55 ares kernel: [  331.557591] ata11.01: status: { DRDY }&#xA;Aug 16 23:13:55 ares kernel: [  331.557592] ata11.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557593] ata11.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557594] ata11.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen&#xA;Aug 16 23:13:55 ares kernel: [  331.557595] ata11.15: hard resetting link&#xA;Aug 16 23:13:55 ares kernel: [  331.562127] rr640l:[0 1  ] port handle error (irq status 00400000)&#xA;Aug 16 23:13:55 ares kernel: [  331.562129] rr640l:[0 1  ] target phy rdy changed&#xA;Aug 16 23:13:55 ares kernel: [  331.997147] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:13:55 ares kernel: [  331.997151] ata12.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:13:59 ares kernel: [  334.671516] rr640l:[0 0 0] start device soft reset.&#xA;Aug 16 23:13:59 ares kernel: [  335.319028] rr640l:[0 1 0] start device soft reset.&#xA;Aug 16 23:13:59 ares kernel: [  336.017206] rr640l:[0 0 0] config_device path_id :0 &#xA;Aug 16 23:13:59 ares kernel: [  336.030144] rr640l:[0 0  ] port started successfully.&#xA;Aug 16 23:13:59 ares kernel: [  336.030146] rr640l:[0 0 0] device probed successfully.&#xA;Aug 16 23:13:59 ares kernel: [  336.048860] rr640l:Backup stamp 5261775f sum 0 backed 1&#xA;Aug 16 23:13:59 ares kernel: [  336.059788] rr640l:Master stamp 5261775f sum 0 backed 1&#xA;Aug 16 23:13:59 ares kernel: [  336.059790] rr640l:raw ffff88078594b038 bad_sector 0&#xA;Aug 16 23:14:00 ares kernel: [  336.081127] rr640l:[0 1 0] config_device path_id :1 &#xA;Aug 16 23:14:00 ares kernel: [  336.094064] rr640l:[0 1  ] port started successfully.&#xA;Aug 16 23:14:00 ares kernel: [  336.094065] rr640l:[0 1 0] device probed successfully.&#xA;Aug 16 23:14:00 ares kernel: [  336.105829] rr640l:Backup stamp 5261775f sum 0 backed 1&#xA;Aug 16 23:14:00 ares kernel: [  336.111791] rr640l:Master stamp 5261775f sum 0 backed 1&#xA;Aug 16 23:14:00 ares kernel: [  336.111792] rr640l:raw ffff88078594a838 bad_sector 0&#xA;Aug 16 23:14:00 ares kernel: [  336.115834] scsi19 : rr640l&#xA;Aug 16 23:14:00 ares kernel: [  336.992285] ata12.15: hard resetting link&#xA;Aug 16 23:14:00 ares kernel: [  336.992335] ata11.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:00 ares kernel: [  336.992343] ata11.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:14:05 ares kernel: [  341.987385] ata11.15: hard resetting link&#xA;Aug 16 23:14:06 ares kernel: [  342.470901] ata12.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:06 ares kernel: [  342.470905] ata12.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:14:06 ares kernel: [  342.470907] ata12.15: limiting SATA link speed to 3.0 Gbps&#xA;Aug 16 23:14:11 ares kernel: [  347.466004] ata12.15: hard resetting link&#xA;Aug 16 23:14:11 ares kernel: [  347.466021] ata11.15: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:11 ares kernel: [  347.466024] ata11.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:14:11 ares kernel: [  347.466026] ata11.15: limiting SATA link speed to 3.0 Gbps&#xA;Aug 16 23:14:16 ares kernel: [  352.461169] ata11.15: hard resetting link&#xA;Aug 16 23:14:16 ares kernel: [  352.944675] ata12.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:14:16 ares kernel: [  352.944683] ata12.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:14:16 ares kernel: [  352.944686] ata12.15: failed to recover PMP after 5 tries, giving up&#xA;Aug 16 23:14:16 ares kernel: [  352.944689] ata12.15: Port Multiplier detaching&#xA;Aug 16 23:14:16 ares kernel: [  352.944695] ahci 0000:09:00.0: FBS is disabled&#xA;Aug 16 23:14:16 ares kernel: [  352.944700] ata12.00: disabled&#xA;Aug 16 23:14:16 ares kernel: [  352.944702] ata12.01: disabled&#xA;Aug 16 23:14:16 ares kernel: [  352.944705] ata12.00: disabled&#xA;Aug 16 23:14:21 ares kernel: [  357.939785] ata12: hard resetting link&#xA;Aug 16 23:14:21 ares kernel: [  357.939837] ata11.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:14:21 ares kernel: [  357.939845] ata11.15: PMP revalidation failed (errno=-19)&#xA;Aug 16 23:14:21 ares kernel: [  357.939848] ata11.15: failed to recover PMP after 5 tries, giving up&#xA;Aug 16 23:14:21 ares kernel: [  357.939850] ata11.15: Port Multiplier detaching&#xA;Aug 16 23:14:21 ares kernel: [  357.939857] ahci 0000:09:00.0: FBS is disabled&#xA;Aug 16 23:14:21 ares kernel: [  357.939861] ata11.00: disabled&#xA;Aug 16 23:14:21 ares kernel: [  357.939864] ata11.01: disabled&#xA;Aug 16 23:14:21 ares kernel: [  357.939867] ata11.00: disabled&#xA;Aug 16 23:14:26 ares kernel: [  362.934898] ata11: hard resetting link&#xA;Aug 16 23:14:27 ares kernel: [  363.418431] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:27 ares kernel: [  363.426395] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:32 ares kernel: [  368.413540] ata12.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:14:32 ares kernel: [  368.413550] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:14:32 ares kernel: [  368.413555] ata12: hard resetting link&#xA;Aug 16 23:14:32 ares kernel: [  368.421533] ata11.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:14:32 ares kernel: [  368.421542] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:14:32 ares kernel: [  368.421546] ata11: hard resetting link&#xA;Aug 16 23:14:32 ares kernel: [  368.905034] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:32 ares kernel: [  368.913027] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;Aug 16 23:14:42 ares kernel: [  378.895256] ata12.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:14:42 ares kernel: [  378.895262] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:14:42 ares kernel: [  378.895263] ata12: limiting SATA link speed to 3.0 Gbps&#xA;Aug 16 23:14:42 ares kernel: [  378.895265] ata12: hard resetting link&#xA;Aug 16 23:14:42 ares kernel: [  378.903251] ata11.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:14:42 ares kernel: [  378.903256] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:14:42 ares kernel: [  378.903258] ata11: limiting SATA link speed to 3.0 Gbps&#xA;Aug 16 23:14:42 ares kernel: [  378.903259] ata11: hard resetting link&#xA;Aug 16 23:14:43 ares kernel: [  379.386776] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:14:43 ares kernel: [  379.394771] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:15:13 ares kernel: [  409.357474] ata12.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:15:13 ares kernel: [  409.357480] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:15:13 ares kernel: [  409.357483] ata12: hard resetting link&#xA;Aug 16 23:15:13 ares kernel: [  409.365440] ata11.00: qc timeout (cmd 0xec)&#xA;Aug 16 23:15:13 ares kernel: [  409.365445] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)&#xA;Aug 16 23:15:13 ares kernel: [  409.365446] ata11: hard resetting link&#xA;Aug 16 23:15:13 ares kernel: [  409.848968] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:15:13 ares kernel: [  409.848982] ata12: EH complete&#xA;Aug 16 23:15:13 ares kernel: [  409.848986] ata12.00: detaching (SCSI 11:0:0:0)&#xA;Aug 16 23:15:13 ares kernel: [  409.849186] sd 11:0:0:0: [sdi] Synchronizing SCSI cache&#xA;Aug 16 23:15:13 ares kernel: [  409.849199] sd 11:0:0:0: [sdi]  &#xA;Aug 16 23:15:13 ares kernel: [  409.849201] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.849202] sd 11:0:0:0: [sdi] Stopping disk&#xA;Aug 16 23:15:13 ares kernel: [  409.849205] sd 11:0:0:0: [sdi] START_STOP FAILED&#xA;Aug 16 23:15:13 ares kernel: [  409.849206] sd 11:0:0:0: [sdi]  &#xA;Aug 16 23:15:13 ares kernel: [  409.849207] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.849243] ata12.01: detaching (SCSI 11:1:0:0)&#xA;Aug 16 23:15:13 ares kernel: [  409.849469] sd 11:1:0:0: [sdj] Synchronizing SCSI cache&#xA;Aug 16 23:15:13 ares kernel: [  409.849481] sd 11:1:0:0: [sdj]  &#xA;Aug 16 23:15:13 ares kernel: [  409.849482] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.849483] sd 11:1:0:0: [sdj] Stopping disk&#xA;Aug 16 23:15:13 ares kernel: [  409.849486] sd 11:1:0:0: [sdj] START_STOP FAILED&#xA;Aug 16 23:15:13 ares kernel: [  409.849487] sd 11:1:0:0: [sdj]  &#xA;Aug 16 23:15:13 ares kernel: [  409.849488] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.856945] ata11: SATA link up 3.0 Gbps (SStatus 123 SControl 320)&#xA;Aug 16 23:15:13 ares kernel: [  409.856959] ata11: EH complete&#xA;Aug 16 23:15:13 ares kernel: [  409.856963] ata11.00: detaching (SCSI 10:0:0:0)&#xA;Aug 16 23:15:13 ares kernel: [  409.857159] sd 10:0:0:0: [sdg] Synchronizing SCSI cache&#xA;Aug 16 23:15:13 ares kernel: [  409.857170] sd 10:0:0:0: [sdg]  &#xA;Aug 16 23:15:13 ares kernel: [  409.857170] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.857171] sd 10:0:0:0: [sdg] Stopping disk&#xA;Aug 16 23:15:13 ares kernel: [  409.857173] sd 10:0:0:0: [sdg] START_STOP FAILED&#xA;Aug 16 23:15:13 ares kernel: [  409.857174] sd 10:0:0:0: [sdg]  &#xA;Aug 16 23:15:13 ares kernel: [  409.857175] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.857211] ata11.01: detaching (SCSI 10:1:0:0)&#xA;Aug 16 23:15:13 ares kernel: [  409.857751] sd 10:1:0:0: [sdh] Synchronizing SCSI cache&#xA;Aug 16 23:15:13 ares kernel: [  409.857764] sd 10:1:0:0: [sdh]  &#xA;Aug 16 23:15:13 ares kernel: [  409.857765] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;Aug 16 23:15:13 ares kernel: [  409.857766] sd 10:1:0:0: [sdh] Stopping disk&#xA;Aug 16 23:15:13 ares kernel: [  409.857769] sd 10:1:0:0: [sdh] START_STOP FAILED&#xA;Aug 16 23:15:13 ares kernel: [  409.857770] sd 10:1:0:0: [sdh]  &#xA;Aug 16 23:15:13 ares kernel: [  409.857770] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 1&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So after upgrading the kernel to 3.19.0-26 I was able to boot with the raid array on, the drivers technically uninstalled, and see the disks themselves in my os. However, it is not recognizing that they are in a raid array. How would I further diagnose this?&lt;/p&gt;&#xA;" OwnerUserId="936" LastEditorUserId="936" LastEditDate="2015-08-17T19:49:01.483" LastActivityDate="2015-08-19T22:15:58.557" Title="RocketRaid 642L Drivers" Tags="|release-freya|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1339" PostTypeId="2" ParentId="1313" CreationDate="2015-08-17T07:48:41.867" Score="0" Body="&lt;p&gt;You should be able to chose the proprietary driver in the settings just like Logan said. If you are not afraid of using ppas, you could go and install the latest official Nvidia driver by following this guide: &lt;a href=&quot;http://www.omgubuntu.co.uk/2015/08/ubuntu-nvidia-graphics-drivers-ppa-is-ready-for-action&quot; rel=&quot;nofollow&quot;&gt;OMG!Ubuntu guide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2015-08-17T07:48:41.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1340" PostTypeId="1" AcceptedAnswerId="1390" CreationDate="2015-08-17T07:49:33.530" Score="2" ViewCount="245" Body="&lt;p&gt;I am running 64bit elementary OS 0.3 Freya and I would like to use Thunderbird as an email client for my Gmail account. I have downloaded it from &lt;a href=&quot;https://www.mozilla.org/en-US/thunderbird/&quot; rel=&quot;nofollow&quot;&gt;the website&lt;/a&gt; as the Software Centre has Thunderbird 31 and Gmail requires Thunderbird 38 or newer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However when I try to run Thunderbird I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XPCOMGlueLoad error for file /home/gthomson/thunderbird/libxul.so:&#xA;libdbus-glib-1.so.2: cannot open shared object file: No such file or directory&#xA;Couldn't load XPCOM.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I &lt;a href=&quot;https://www.mozilla.org/en-US/thunderbird/31.0/system-requirements/&quot; rel=&quot;nofollow&quot;&gt;know&lt;/a&gt; that Thunderbird requires GLib 2.22 or higher to run but I don't know what package I should download to fix this issue.?&lt;/p&gt;&#xA;" OwnerUserId="938" LastActivityDate="2015-08-27T22:13:37.780" Title="GLib 2.22 to run Thunderbird" Tags="|release-freya|applications|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1341" PostTypeId="1" CreationDate="2015-08-17T08:03:50.110" Score="9" ViewCount="351" Body="&lt;p&gt;My printer is running low on color ink but I don't need to print in color right now. Still, whenever I print anything, I get a &quot;Out of ink&quot; notification that I can't dismiss without restarting elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot of that problem:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ltegl.png&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ltegl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I disable that particular notification?&lt;/p&gt;&#xA;" OwnerUserId="25" LastEditorUserId="25" LastEditDate="2015-08-18T08:35:18.693" LastActivityDate="2016-05-20T08:41:27.187" Title="&quot;Out of ink&quot; notification cannot be dismissed" Tags="|release-freya|notifications|printer|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1342" PostTypeId="2" ParentId="1334" CreationDate="2015-08-17T10:13:19.560" Score="2" Body="&lt;p&gt;The problem was keyboard configuration.&#xA;For some reason, the greeter has been set to US-English keyboard (instead of French) when the console and once logged in Freya is still with the French Keyboard. As the keys are not mapped the same way, I was having an authentication failure.&#xA;This was clear when looking at the file:&#xA;/var/log/lightdm/lightdm.log&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't managed to get the French keyboard back (for Greeter) yet but at least I can work around it:&#xA; - I can use the on-screen keyboard (not cool as anybody can see what I am typing ... but it works)&#xA; - I can type the password on the keyboard knowing the US keyboard map (if there's no punctuation signs that's doable).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully I will manage to get the French keyboard back for the Greeter.&lt;/p&gt;&#xA;" OwnerUserId="932" LastActivityDate="2015-08-17T10:13:19.560" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1343" PostTypeId="2" ParentId="1312" CreationDate="2015-08-17T11:08:31.980" Score="1" Body="&lt;p&gt;Try in terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &quot;LANG=en_IN.utf8&quot;&#xA;&#xA;localectl set-locale &quot;LANGUAGE=en_IN.utf8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check again your /etc/default/locale  file matchs the changes. Check Lollypop runs without issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Also:&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can manually update your locales specs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure locales&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notice your language format. It should be &quot;en_IN.utf8&quot; or &quot;en_IN.UTF-8&quot; &lt;strong&gt;(*)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, edit your enviroment file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/environment&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add a new line with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=&quot;en_IN.UTF-8&quot;&#xA;LANGUAGE=&quot;en_IN&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replaced &quot;en_IN.UTF-8&quot; by &quot;en_IN.utf8&quot; according &lt;strong&gt;(*)&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save and close the file. Now edit your locale file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/default/locale&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Delete all the content and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=&quot;en_IN.UTF-8&quot;&#xA;LANGUAGE=&quot;en_IN.UTF-8&quot;&#xA;LC_CTYPE=&quot;en_IN.UTF-8&quot;&#xA;LC_NUMERIC=&quot;en_IN.UTF-8&quot;&#xA;LC_TIME=&quot;en_IN.UTF-8&quot;&#xA;LC_COLLATE=&quot;en_IN.UTF-8&quot;&#xA;LC_MONETARY=&quot;en_IN.UTF-8&quot;&#xA;LC_MESSAGES=&quot;en_IN.UTF-8&quot;&#xA;LC_PAPER=&quot;en_IN.UTF-8&quot;&#xA;LC_NAME=&quot;en_IN.UTF-8&quot;&#xA;LC_ADDRESS=&quot;en_IN.UTF-8&quot;&#xA;LC_TELEPHONE=&quot;en_IN.UTF-8&quot;&#xA;LC_MEASUREMENT=&quot;en_IN.UTF-8&quot;&#xA;LC_IDENTIFICATION=&quot;en_IN.UTF-8&quot;&#xA;LC_ALL=&quot;en_IN.UTF-8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replaced &quot;en_IN.UTF-8&quot; by &quot;en_IN.utf8&quot; according &lt;strong&gt;(*)&lt;/strong&gt;. Save and close file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At last, in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-locale &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To check that all is well, type in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;locale&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command should throw you the same content as we stuck in the last step. If so, reboot and try again with Lollypop.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2015-08-17T19:23:31.890" LastActivityDate="2015-08-17T19:23:31.890" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1344" PostTypeId="1" AcceptedAnswerId="1348" CreationDate="2015-08-17T11:32:56.630" Score="22" ViewCount="7612" Body="&lt;p&gt;I would like to replace the default Terminal with the &lt;code&gt;gnome-terminal&lt;/code&gt;. Is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I install &lt;code&gt;gnome-terminal&lt;/code&gt; via &lt;code&gt;apt-get&lt;/code&gt; it does not show up in the applications menu and I can't find an option to replace the &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;t&lt;/kbd&gt; keyboard shortcut to open &lt;code&gt;gnome-terminal&lt;/code&gt; instead of &lt;code&gt;pantheon-terminal&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="939" LastEditorUserId="4688" LastEditDate="2016-04-22T16:47:49.823" LastActivityDate="2016-04-22T16:47:49.823" Title="How can I change the default Terminal app?" Tags="|applications|keyboard-shortcuts|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1345" PostTypeId="2" ParentId="1336" CreationDate="2015-08-17T12:32:51.347" Score="4" Body="&lt;p&gt;What you are asking, can be achieved using a custom desktop session.&#xA;Pantheon, xfce, lxde, unity are all window managers which run inside xorg sessions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, in-order to use xfce motif top panel, you need to replace wingpanel(elementary) to xfce4-panel in a custom desktop session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To know in details about Xorg : &lt;a href=&quot;https://wiki.debian.org/Xorg&quot; rel=&quot;nofollow&quot; title=&quot;Xorg Debian Wiki&quot;&gt;Xorg Debian Wiki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details on window managers: &lt;a href=&quot;https://wiki.archlinux.org/index.php/Display_manager&quot; rel=&quot;nofollow&quot;&gt;Display Managers&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This blog might help you find what you need: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=152930&amp;amp;p=18&quot; rel=&quot;nofollow&quot;&gt;Custom Desktop Session&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you just want an icon theme to make your elementary look like xfce: &lt;a href=&quot;https://github.com/shimmerproject/elementary-xfce&quot; rel=&quot;nofollow&quot;&gt;elementary-xfce&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or if you want to retain the default pantheon-wingpanel but want to customize the style: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2013/10/customize-elementaryos-panel/&quot; rel=&quot;nofollow&quot;&gt;Customize elementary wing-panel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="2511" LastEditDate="2016-08-18T14:23:01.913" LastActivityDate="2016-08-18T14:23:01.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1346" PostTypeId="1" CreationDate="2015-08-17T12:41:55.470" Score="9" ViewCount="4770" Body="&lt;p&gt;I hail from Asia and am fluent in three languages. This means that I often find myself switching keyboards when I have to type. However, I can't seem to find the way to type in other languages beside English (more specifically, Chinese and Japanese). After I install the language pack and select the keyboard layout for these languages as default, all it does when I switch keyboards is allow me to type English with what is basically an English keyboard.&lt;/p&gt;&#xA;" OwnerUserId="940" LastEditorUserId="45" LastEditDate="2015-08-18T02:35:16.587" LastActivityDate="2018-12-15T17:37:04.950" Title="How do I type in multiple languages on elementary OS?" Tags="|keyboard|accessibility|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1348" PostTypeId="2" ParentId="1344" CreationDate="2015-08-17T14:27:38.977" Score="18" Body="&lt;p&gt;You can set the default terminal by changing the alternative for &lt;code&gt;x-terminal-emulator&lt;/code&gt;. Installing &lt;strong&gt;gnome-terminal&lt;/strong&gt; creates an alternative symlink so all you have to do is set it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --set x-terminal-emulator /usr/bin/gnome-terminal.wrapper&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; It seems like the shortcut implementation is not using the alternative, but rather a &lt;em&gt;gsettings&lt;/em&gt; configuration. It's still a good idea to set the alternative symlink above, however, to use the keyboard shortcut some gsettings properties will need to be modified. Use &lt;em&gt;dconf-editor&lt;/em&gt; (&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;) or &lt;em&gt;gsettings&lt;/em&gt; to change the default terminal application to &lt;strong&gt;gnome-terminal&lt;/strong&gt;. You will need to modify the &lt;em&gt;exec&lt;/em&gt; and &lt;em&gt;exec-arg&lt;/em&gt; properties in the &lt;em&gt;org.gnome.desktop.default-applications.terminal&lt;/em&gt; schema.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec gnome-terminal&#xA;gsettings set org.gnome.desktop.default-applications.terminal exec-arg ''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-08-18T18:19:08.840" LastActivityDate="2015-08-18T18:19:08.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1350" PostTypeId="1" AcceptedAnswerId="1351" CreationDate="2015-08-17T15:09:01.180" Score="2" ViewCount="126" Body="&lt;p&gt;After installing OSSEC in Luna, LightDM can not find &lt;code&gt;/usr/share/xgreeters/default.desktop&lt;/code&gt; and just stops. Uninstalling OSSEC does not help.&lt;/p&gt;&#xA;" OwnerUserId="942" LastEditorUserId="45" LastEditDate="2015-08-18T02:29:14.500" LastActivityDate="2015-08-18T17:03:16.560" Title="Why won't LightDM start properly after installing OSSEC?" Tags="|greeter|luna|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1351" PostTypeId="2" ParentId="1350" CreationDate="2015-08-17T15:11:02.760" Score="4" Body="&lt;p&gt;Link default.desktop to pantheon-greeter.desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/xgreeters  &#xA;sudo ln -s pantheon-greeter.desktop default.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="942" LastEditorUserId="942" LastEditDate="2015-08-18T17:03:16.560" LastActivityDate="2015-08-18T17:03:16.560" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1352" PostTypeId="1" AcceptedAnswerId="1357" CreationDate="2015-08-17T15:39:29.733" Score="2" ViewCount="1175" Body="&lt;p&gt;&lt;strong&gt;TL;DR:&lt;/strong&gt; I would like to have the same thing as described &lt;a href=&quot;http://erenon.hu/2013/04/03/slick-gnome-terminal/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, but for Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to have the (graphical) terminal and Emacs windows the header or without any decorations. Does anyone know how to do this?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Off topic, but indirectly related: I see a little to no use of the border and the headers of the windows. Fortunately, elementary OS puts acceptable borders on the windows, but the header is still a disaster. The header info could appear on mouse-over or in the common header line like it is done in OSX.&lt;br&gt;&#xA;If there is any movement in this or similar direction, please let me know.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. Emacs works not inside the terminal.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.P.S. I see that &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/166/how-can-i-disable-the-shadow-around-a-window&quot;&gt;this question&lt;/a&gt; is a little bit related, but I cannot figure out how to reach the expected result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt; This is in fact a final answer on initial question, but I don't want to add another one as Daniel Foré has already provided the acceptable answer.&lt;br&gt;&#xA;I changed the source code so that decorations and scrollbar are disabled (thanks Daniel!), but the problem is a bit deeper: it is necessary to do something with tabs, but it seems the terminal simply needs another, &quot;naked&quot; mode which would disable everything plus setting the terminal into the single window mode (no invisible tabs).&lt;br&gt;&#xA;For those who are interested, it was only &lt;code&gt;set_decorated(false);&lt;/code&gt; in function &lt;code&gt;init&lt;/code&gt;, about line 123 in file PantheonTerminalWindow.vala and also I disabled the scrollbar commenting out the line &lt;code&gt;g.attach (sb, 1, 0, 1, 1)&lt;/code&gt; (line number about 579). The hack is dirty, but it was good enough to see that disabling the decorations is just not enough. Alas.&lt;/p&gt;&#xA;" OwnerUserId="575" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-17T22:49:32.617" Title="How to remove the window header or decorations?" Tags="|design|window-decoration|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1355" PostTypeId="2" ParentId="792" CreationDate="2015-08-17T17:04:31.953" Score="0" Body="&lt;p&gt;Okay, so the solution was installing &lt;code&gt;libatspi2.0-dev&lt;/code&gt; using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libatspi2.0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This was all that I needed to do to stop receiving these errors. After that, everything works great.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-08-17T17:04:31.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1356" PostTypeId="2" ParentId="1346" CreationDate="2015-08-17T17:13:38.763" Score="4" Body="&lt;p&gt;Go to &lt;em&gt;Settings - Keyboard - Layout&lt;/em&gt; (3rd tab). Add a new language by clicking the plus sign (+) at the bottom left and selecting it from a list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Elk9b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Elk9b.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Tip: You can quickly change between distributions by pressing Alt+Spacebar. The shortkey can be edited under &lt;em&gt;Settings - Keyboard - Shortcuts - Universal Access - Next Keyboard Layout&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0hcEU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0hcEU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, after adding multiple keyboard layouts, they should be accessible in a panel applet and be switched from there too with the mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PskbX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PskbX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="934" LastEditorDisplayName="user170" LastEditDate="2016-07-03T22:11:28.807" LastActivityDate="2016-07-03T22:11:28.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1357" PostTypeId="2" ParentId="1352" CreationDate="2015-08-17T17:25:12.430" Score="6" Body="&lt;p&gt;This is not really possible without forking the application. Decorations are drawn by the toolkit now instead of by the window manager which means that they are actually part of the application and not something separate.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-17T17:25:12.430" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1358" PostTypeId="2" ParentId="776" CreationDate="2015-08-17T18:17:26.790" Score="5" Body="&lt;p&gt;There is not a netboot install for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-17T18:17:26.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1359" PostTypeId="1" AcceptedAnswerId="1392" CreationDate="2015-08-17T19:39:17.997" Score="3" ViewCount="655" Body="&lt;p&gt;I am trying to install and run SelekTOR according to &lt;a href=&quot;http://www.webupd8.org/2014/09/selektor-tor-gui-with-country-exit-node.html&quot; rel=&quot;nofollow&quot;&gt;this article&lt;/a&gt;. Installation is fine, but when I am trying to run it, nothing happens. Here is console output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(java:31665): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:31665): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:31665): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:31665): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:31665): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;Exception in thread &quot;AWT-EventQueue-0&quot; java.lang.UnsupportedOperationException&#xA;    at java.awt.TrayIcon.&amp;lt;init&amp;gt;(TrayIcon.java:144)&#xA;    at java.awt.TrayIcon.&amp;lt;init&amp;gt;(TrayIcon.java:168)&#xA;    at java.awt.TrayIcon.&amp;lt;init&amp;gt;(TrayIcon.java:197)&#xA;    at java.awt.TrayIcon.&amp;lt;init&amp;gt;(TrayIcon.java:227)&#xA;    at lib.SwingTrayIcon.&amp;lt;init&amp;gt;(SwingTrayIcon.java:65)&#xA;    at client.SelekTOR.&amp;lt;init&amp;gt;(SelekTOR.java:213)&#xA;    at SelekTOR$1.run(SelekTOR.java:42)&#xA;    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:311)&#xA;    at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:756)&#xA;    at java.awt.EventQueue.access$500(EventQueue.java:97)&#xA;    at java.awt.EventQueue$3.run(EventQueue.java:709)&#xA;    at java.awt.EventQueue$3.run(EventQueue.java:703)&#xA;    at java.security.AccessController.doPrivileged(Native Method)&#xA;    at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:75)&#xA;    at java.awt.EventQueue.dispatchEvent(EventQueue.java:726)&#xA;    at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)&#xA;    at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)&#xA;    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)&#xA;    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)&#xA;    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)&#xA;    at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On KDE everything was working fine, but not on Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix it?&lt;/p&gt;&#xA;" OwnerUserId="946" LastActivityDate="2015-08-19T00:00:17.270" Title="How to run SelekTOR on Elementary OS?" Tags="|software-installation|" AnswerCount="3" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="1360" PostTypeId="1" CreationDate="2015-08-17T19:57:24.460" Score="7" ViewCount="1124" Body="&lt;p&gt;At all 4 corners of my screen there are rounded corners, but I want to use my screen normally and use all pixels I have. Is there any way to configure this?&lt;/p&gt;&#xA;" OwnerUserId="947" LastEditorUserId="45" LastEditDate="2015-08-18T02:30:41.510" LastActivityDate="2015-08-18T14:32:06.130" Title="How can I disable the rounded display corners Gala plugin?" Tags="|release-freya|gala|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1361" PostTypeId="2" ParentId="1360" CreationDate="2015-08-17T20:38:22.753" Score="8" Body="&lt;p&gt;This was a design decision made by the developers for Freya. There are some settings for Gala (the window manager in elementary OS) that control the corner masking. You can install &lt;em&gt;dconf-editor&lt;/em&gt; (&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;) to change the settings via a GUI, or use the built-in &lt;em&gt;gsettings&lt;/em&gt; command from a terminal. You need to set the &lt;em&gt;enable&lt;/em&gt; property to &lt;strong&gt;false&lt;/strong&gt; in the &lt;em&gt;org.pantheon.desktop.gala.mask-corners&lt;/em&gt; schema. The &lt;em&gt;gsettings&lt;/em&gt; command for this is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.mask-corners enable false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can later reset to default with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.desktop.gala.mask-corners enable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-08-18T14:32:06.130" LastActivityDate="2015-08-18T14:32:06.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1363" PostTypeId="1" AcceptedAnswerId="1400" CreationDate="2015-08-17T21:29:44.077" Score="2" ViewCount="8237" Body="&lt;p&gt;Installed Windows 10 normally in UEFI and then Elementary OS Freya. During installation I have created swap and root partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I can't get GRUB to show up. What I've done to try to fix this problem:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I ran Boot Repair (Recommended repair) on live elementary (secure boot off).&lt;/li&gt;&#xA;&lt;li&gt;On windows command line, entered: bcdedit /set &quot;{bootmgr}&quot; path \EFI\ubuntu\grubx64.efi&lt;/li&gt;&#xA;&lt;li&gt;Disabled fast boot in Windows&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Boots straight to Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the BIOS settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RcaYq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RcaYq.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it's worth mentioning, the laptop is an Acer ES1-512 with latest 1.15 BIOS.&lt;/p&gt;&#xA;" OwnerUserId="949" LastActivityDate="2015-11-18T16:59:48.650" Title="Dual-boot with Windows 10" Tags="|dual-boot|microsoft-windows|uefi|" AnswerCount="4" CommentCount="0" ClosedDate="2016-02-03T01:24:30.177" ContentLicense="CC BY-SA 3.0" />
  <row Id="1364" PostTypeId="2" ParentId="1359" CreationDate="2015-08-17T22:45:36.553" Score="-1" Body="&lt;p&gt;A lot of graphical Java applications are based on Swing, which relies on the pixbuf rendering engine.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately pixbuf is not installed in elementary OS by default. Install pixbuf and your errors should be gone:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gtk2-engines-pixbuf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-17T22:45:36.553" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1366" PostTypeId="1" CreationDate="2015-08-18T02:36:19.800" Score="0" ViewCount="78" Body="&lt;p&gt;In Geary, while browsing the Inbox (or any mail category), I can select a message item and drag it to the Trash, or to one of my many Labels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can also select multiple items by using &lt;kbd&gt;Shift&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt; keys, but I can't drag them around. When I attempt click &amp;amp; drag on multiple selected items, only one will get dragged, while the rest of highlighted items go back to their unselected state.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug or am I doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="425" LastEditorUserId="425" LastEditDate="2015-08-18T15:59:12.610" LastActivityDate="2015-09-17T16:09:30.803" Title="How can I drag two or more elements in Geary?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-06T09:00:41.050" ContentLicense="CC BY-SA 3.0" />
  <row Id="1367" PostTypeId="2" ParentId="1363" CreationDate="2015-08-18T03:24:30.973" Score="0" Body="&lt;p&gt;I installed easyBCD in Windows 10 and added an entry for elementary OS. Then I disabled grub on the elementary side. Now, when I boot up, I choose elementary or Win 10 from the Windows boot manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then on the elementary side, edit /etc/default/grub&#xA;Find this line: GRUB_TIMEOUT=10&#xA;Change the value to 0.1 (Zero didn't work on mine, it still waited 10 sec.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This won't disable grub per se, it just times it out real quick. Maybe not the most elegant solution, but it may get you where you want to go.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2015-08-18T03:24:30.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1368" PostTypeId="1" AcceptedAnswerId="1374" CreationDate="2015-08-18T03:40:25.273" Score="3" ViewCount="7820" Body="&lt;p&gt;I downloaded pdfshuffler and radiotray from the Software Center, but they won't open in elementary. When I open either of them in Terminal, I get the error discussed here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/333/gtk-error-while-running-a-pyplot-application&quot;&gt;GTK-error while running a pyplot-application&lt;/a&gt; The answer in this question didn't help me because it sounded there like the program still ran but showed the error in the Terminal, however in my case, the programs don't run at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some reading and it may be a gtk2 conflict?? Can someone shed some light on this and if there is a possible fix. Both of these programs ran fine in Ubuntu 14.04. THANKS&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-11T14:22:33.907" Title="gtk2 apps not working in elementary" Tags="|software-installation|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1369" PostTypeId="2" ParentId="1033" CreationDate="2015-08-18T04:47:02.960" Score="1" Body="&lt;p&gt;I asked a similar question here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1017/how-can-i-get-noise-and-photos-to-recognize-my-phone?noredirect=1#comment2180_1017&quot;&gt;How can I get Noise and Photos to recognize my phone?&lt;/a&gt; maybe it will help you out. I was able to get my Galaxy s6 to work (except for Noise).&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-18T04:47:02.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1371" PostTypeId="2" ParentId="1366" CreationDate="2015-08-18T05:34:41.543" Score="1" Body="&lt;p&gt;Keep &lt;kbd&gt;Shift&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt; pressed while drag them worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my opinion this sounds like a Bug.&lt;br&gt;&#xA;You can file a Bug about Geary here: &lt;a href=&quot;https://bugzilla.gnome.org/enter_bug.cgi?product=geary&quot; rel=&quot;nofollow&quot;&gt;https://bugzilla.gnome.org/enter_bug.cgi?product=geary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-08-18T05:34:41.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1372" PostTypeId="2" ParentId="1363" CreationDate="2015-08-18T05:47:50.610" Score="0" Body="&lt;p&gt;Try reading the following blogs, might find some help there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://linuxbsdos.com/2015/01/18/tip-for-dual-booting-windows-10-preview-and-linux-on-a-pc-with-uefi-firmware/&quot; rel=&quot;nofollow noreferrer&quot;&gt;win10 preview &amp;amp; ubuntu dual-boot tip&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/564496/trying-to-dual-boot-ubuntu-14-10-with-windows-10-last-one-not-detected&quot;&gt;win10 &amp;amp; ubuntu14.04 dual-boot&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-18T05:47:50.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1374" PostTypeId="2" ParentId="1368" CreationDate="2015-08-18T08:15:21.490" Score="6" Body="&lt;p&gt;pdfshuffler:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looks like there is bug report about pdfshuffler on freya :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1422062&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad Bug Report&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the error you are getting : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A bug report was filed and fixed. &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1472836&quot; rel=&quot;nofollow noreferrer&quot;&gt;pantheon-filechooser-module-bug-report&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might have installed an older version of the application.&#xA;Try re-installing the application, but from this link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/ubuntu/trusty/+package/pdfshuffler&quot; rel=&quot;nofollow noreferrer&quot;&gt;pdfshuffler for ubuntu 14.04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the package according to your system architecture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1359/how-to-run-selektor-on-elementary-os&quot;&gt;this post&lt;/a&gt; the user is having a similar problem with a different application, and updating the application to the latest one fixes the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, if you are getting an error about not finding a package named poppler:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install poppler python bindings, which will be pypoppler and pypdf(recently changed to pypdf2).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ohh, and also remember, not to run pdfshuffler as root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reffer to these if you want a detailed answer to the poppler problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.linuxquestions.org/questions/slackware-14/trying-to-install-&amp;#39;pdf-shuffler&amp;#39;-and-have-a-gtk-2-x-dependency-question-869392/&quot; rel=&quot;nofollow noreferrer&quot;&gt;poppler not found solved&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762083&quot; rel=&quot;nofollow noreferrer&quot;&gt;could not import pdfshuffler debian bug report&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a different approach to this problem, check if you are getting this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are, then you may find help here: &lt;a href=&quot;https://askubuntu.com/questions/342202/failed-to-load-module-canberra-gtk-module-but-already-installed&quot;&gt;failed to load cranberra-gtk-module&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or here : &lt;a href=&quot;http://www.linuxquestions.org/questions/linux-software-2/gtk-message-failed-to-load-module-canberra-gtk-module-936168/&quot; rel=&quot;nofollow noreferrer&quot;&gt;cranberra-gtk-module solved&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, for the other part of the problem,&#xA;radio tray:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope you will find help in either of these links. Both show how to make radio tray work in elementary:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://eos-snippets.blogspot.in/2015/01/radio-tray-stopped-working-in-freya.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Radio tray stopped working in freya&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://zecheru.com/radio-tray-is-not-working-in-elementary-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Radio tray not working&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope these links might help you find what you need.&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2015-08-22T06:53:59.050" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1375" PostTypeId="1" AcceptedAnswerId="1377" CreationDate="2015-08-18T09:08:49.243" Score="5" ViewCount="1166" Body="&lt;p&gt;Since the latest update my clock disappeared.&lt;br&gt;&#xA;(I guess through the latest language-plug update)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The workaround from &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1195/227&quot;&gt;here&lt;/a&gt; don't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the clock back to wingpanel?&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-18T09:42:27.397" Title="Time in wingpanel disappeared" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-01-30T12:55:14.730" ContentLicense="CC BY-SA 3.0" />
  <row Id="1376" PostTypeId="1" CreationDate="2015-08-18T09:20:18.770" Score="3" ViewCount="625" Body="&lt;p&gt;I'm trying to install elementary OS Freya from USB stick or DVD but when I hit Enter on 'Install elementary OS', I get a black screen with a few errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Could not open ~\EFI\BOOT\fallback.efi~: 14&lt;/code&gt;, &#xA;&lt;code&gt;Failed to open \EFI\BOOT\grubx64.efi - 800000000000000E&lt;/code&gt; and &lt;code&gt;Failed to load image&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried turning SecureBoot OFF and ON. But that doesn't change anything. I have also tried turning FastBoot OFF.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the exact same errors when I try to install Ubuntu 15.04 Vivid Vervet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried burning the ISO to USB using Rufus, as instructed on the elementary website. I then tried using Unetbootin. And finally I tried just right-clicking the ISO file in Windows and clicking Burn Disc Image (Windows 10).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get elementary OS to boot?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a feeling it may have something to do with my hardware. It's a fairly new PC: Asus ROG g20.&lt;/p&gt;&#xA;" OwnerUserId="953" LastEditorUserId="34" LastEditDate="2015-08-23T21:41:44.253" LastActivityDate="2015-08-23T21:41:44.253" Title="How can I get elementary OS to boot?" Tags="|release-freya|boot|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1377" PostTypeId="2" ParentId="1375" CreationDate="2015-08-18T09:42:27.397" Score="9" Body="&lt;p&gt;Try re-installing the date-time indicator&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work, try editing the /etc/environment file and put this line at the end of it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LC_ALL=&quot;en_US.UTF-8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Log out and log back in, and it should display your clock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a detailed reading:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1356698&quot;&gt;Launchpad-Bug-Report&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-08-18T09:42:27.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1378" PostTypeId="1" CreationDate="2015-08-18T11:06:33.447" Score="1" ViewCount="667" Body="&lt;p&gt;When I open a pdf file in document viewer there are no page up/down arrows. I have to scroll through the document using the sidebar or up/down keys. I like using the page up/down buttons to quickly get to the page I need or browse through pages. How do I get them back in document viewer?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The up/down arrows are in Linux Mint and Xubuntu. They are usually to the left of the page number box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="955" LastEditorUserId="84" LastEditDate="2018-05-05T23:15:49.770" LastActivityDate="2018-05-05T23:15:49.770" Title="How to get page up/down arrows to show in document viewer?" Tags="|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1379" PostTypeId="2" ParentId="1359" CreationDate="2015-08-18T13:31:29.007" Score="1" Body="&lt;p&gt;Updating SelekTOR to the latest version solved the problem.&#xA;P.S. That's strange that .deb from site is version 3.13-38, though it installs SelekTOR version 3.13.18&lt;/p&gt;&#xA;" OwnerUserId="946" LastActivityDate="2015-08-18T13:31:29.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1380" PostTypeId="2" ParentId="1376" CreationDate="2015-08-18T14:35:19.800" Score="0" Body="&lt;p&gt;Sounds odd. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Check BIOS: May be there is another setting at BIOS that has to be modified (I've got this Asus X555LN two weeks ago and not only had to disable secure boot, but to enable CMS; this is on a laptop though) so you might want to check. Google info about Asus BIOS settings for legacy/MBR/non-UEFI boot modes.&lt;/li&gt;&#xA;&lt;li&gt;Use Lili instead. I recall having had issues with the tool you mention when attempting to burn several images to a large USB drive. &lt;/li&gt;&#xA;&lt;li&gt;Try burning another Distro image to the same USB drive -this is just for troubleshooting: if a different distro works, we may safely assume there is a problem with the image you are using. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hope this helps. Let us know how things go :)&lt;/p&gt;&#xA;" OwnerUserId="956" LastEditorUserId="26" LastEditDate="2015-08-18T17:30:12.980" LastActivityDate="2015-08-18T17:30:12.980" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1382" PostTypeId="1" CreationDate="2015-08-18T14:52:43.113" Score="5" ViewCount="1317" Body="&lt;p&gt;when I restart or suspend my machine I suddenly cannot connect to my wifi network, what I read on other posts is to use this line code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo killall NetworkManager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This help when I'm just using my wireless network, but when I'm with the cable the network icon change and try to find the cable network.&lt;/p&gt;&#xA;" OwnerUserId="958" LastEditorDisplayName="user170" LastEditDate="2017-03-01T14:39:19.243" LastActivityDate="2017-03-01T14:39:19.243" Title="Wifi problems after restart or suspend" Tags="|release-freya|release-loki|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1383" PostTypeId="2" ParentId="1194" CreationDate="2015-08-18T15:16:12.587" Score="2" Body="&lt;p&gt;This happened to me after I uninstalled the US language in the &lt;code&gt;Region and Language&lt;/code&gt; section and left only Portuguese.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I reinstalled the US language, the clock appeared again.&lt;/p&gt;&#xA;" OwnerUserId="959" LastEditorUserId="9" LastEditDate="2015-08-19T13:18:18.420" LastActivityDate="2015-08-19T13:18:18.420" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1386" PostTypeId="2" ParentId="1376" CreationDate="2015-08-18T19:12:26.903" Score="3" Body="&lt;p&gt;The ASUS PC you have supports GPU display. Go to BIOS, System Agent Configuration, then Graphics Config and set Primary Display to CPU instead of Auto. Turn Fastboot OFF and then leave Windows UEFI on and boot to your setup drive. It will now boot properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And don't forget to put the cable into the display port for the CPU not GPU on your tower otherwise you won't see anything on the screen.&lt;/p&gt;&#xA;" OwnerUserId="962" LastEditorUserId="962" LastEditDate="2015-08-18T19:22:03.680" LastActivityDate="2015-08-18T19:22:03.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1387" PostTypeId="1" AcceptedAnswerId="1396" CreationDate="2015-08-18T20:20:07.307" Score="5" ViewCount="928" Body="&lt;p&gt;I can see I can set proxy's configuration for http, https, ftp, socks, etc. But I cannot set exceptions to this rules.&lt;/p&gt;&#xA;" OwnerUserId="793" LastActivityDate="2015-08-19T04:14:04.223" Title="Is there a way to add proxy exceptions on Network Config?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1388" PostTypeId="1" CreationDate="2015-08-18T20:58:46.943" Score="3" ViewCount="87" Body="&lt;p&gt;for some reason, Steam became too slow today.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried update and upgrade, but the problem is still there. I think that is something wrong with &lt;code&gt;xserver-xorg-video-intel&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Some informations:&lt;/strong&gt;&lt;br&gt;&#xA;ASUS S46C&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*-display              &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   descrição: VGA compatible controller&#xA;   produto: 3rd Gen Core processor Graphics Controller&#xA;   fabricante: Intel Corporation&#xA;   ID físico: 2&#xA;   informações do barramento: pci@0000:00:02.0&#xA;   versão: 09&#xA;   largura: 64 bits&#xA;   clock: 33MHz&#xA;   capacidades: msi pm vga_controller bus_master cap_list rom&#xA;   configuração: driver=i915 latency=0&#xA;   recursos: irq:46 memória:f7800000-f7bfffff memória:e0000000-efffffff porta de E/S:f000(tamanho=64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;glxinfo | grep render&lt;/p&gt;&#xA;&#xA;&lt;p&gt;direct rendering: Yes&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 256 bits)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GL_MESA_ycbcr_texture, GL_NV_blend_square, GL_NV_conditional_render, &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="963" LastEditorUserId="242" LastEditDate="2015-08-18T23:02:50.047" LastActivityDate="2015-08-18T23:02:50.047" Title="Steam games too slow" Tags="|release-freya|graphic-drivers|steam|" AnswerCount="0" CommentCount="0" ClosedDate="2015-10-21T13:45:37.463" ContentLicense="CC BY-SA 3.0" />
  <row Id="1389" PostTypeId="2" ParentId="1382" CreationDate="2015-08-18T23:09:36.573" Score="2" Body="&lt;p&gt;I will have to investigate further to find an automatic solution, but this problem occasionally happens to me as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution I use is to run &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo restart NetworkManager&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This restarts network manager cleanly and re-establishes any connections you had. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There was a bug in older Ubuntu systems where this would occur and you had to add a command to one of the files uses by pm-utils, but it seems this problem is not exactly the same as the previous one.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-08-18T23:09:36.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1390" PostTypeId="2" ParentId="1340" CreationDate="2015-08-18T23:14:34.847" Score="2" Body="&lt;p&gt;I recommend using the official &lt;a href=&quot;https://launchpad.net/~mozillateam/+archive/ubuntu/thunderbird-next&quot; rel=&quot;nofollow&quot;&gt;Thunderbird PPA&lt;/a&gt; instead.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Add &lt;code&gt;ppa:mozillateam/thunderbird-next&lt;/code&gt; to your sources,&lt;/li&gt;&#xA;&lt;li&gt;Update the software sources,&lt;/li&gt;&#xA;&lt;li&gt;Then upgrade Thunderbird.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Commandline option:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:mozillateam/thunderbird-next&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="242" LastActivityDate="2015-08-18T23:14:34.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1391" PostTypeId="1" AcceptedAnswerId="1393" CreationDate="2015-08-18T23:42:28.157" Score="5" ViewCount="602" Body="&lt;p&gt;NB: I'm not talking about startup applications. I mean, how does the system know which applications to start as part of the Pantheon destkop, such as which panel, dock, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm only seeing &lt;code&gt;gala&lt;/code&gt; and &lt;code&gt;gnome-settings-daemon&lt;/code&gt; in &lt;code&gt;/usr/share/gnome-session/sessions/pantheon.session&lt;/code&gt;, so I figure it must be somewhere else.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="242" LastEditDate="2015-08-19T19:20:19.533" LastActivityDate="2015-08-19T19:20:19.533" Title="Where are the settings for which applications are loaded as part of the Pantheon Desktop?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1392" PostTypeId="2" ParentId="1359" CreationDate="2015-08-19T00:00:17.270" Score="7" Body="&lt;p&gt;The SelekTOR developer here, you should pretty much always use the SelekTOR download from the official website &lt;a href=&quot;http://www.dazzleships.net&quot;&gt;http://www.dazzleships.net&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As noted by LewisGoddard trayicon support is disabled on Gnome based systems it does use a hardcoded desktop detection list but if this list fails it falls back to actually trying to load the trayicon and if that fails it disables the trayicon support automatically so it should start up fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just checked the latest release 3.13.38 against the latest ElementaryOS and it works fine with Chromium and Firefox. Do not use Midori as it does not have the required PAC proxying support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My recommendation for SelekTOR on Elementary would be to pin it to the dock and in SelekTOR preferences ensure &quot;Minimise instead of Exit on close&quot; is checked.&#xA;You can also set &quot;Minimise on startup&quot; if you intend to use auto startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alistair Neil&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SelekTOR Maintainer&lt;/p&gt;&#xA;" OwnerUserId="964" LastActivityDate="2015-08-19T00:00:17.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1393" PostTypeId="2" ParentId="1391" CreationDate="2015-08-19T02:02:28.753" Score="4" Body="&lt;p&gt;Pantheon uses a component called Cerbere as a watchdog type service that launches and monitors the additional desktop components. By default, the processes it starts and monitors are: wingpanel, plank, and slingshot-launcher. These are configurable through &lt;em&gt;dconf-editor&lt;/em&gt; or &lt;em&gt;gsettings&lt;/em&gt;. Take a look at the &lt;em&gt;monitored-processes&lt;/em&gt; property in the &lt;em&gt;org.pantheon.desktop.cerbere&lt;/em&gt; schema.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.pantheon.desktop.cerbere monitored-processes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-08-19T02:02:28.753" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1395" PostTypeId="2" ParentId="1340" CreationDate="2015-08-19T04:05:39.153" Score="0" Body="&lt;p&gt;In general, to  search the repositories for a package you are looking for you can use apt-cache search. In your case:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache search libdbus-glib&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There you will get a list of packages that have a match. Packages ending in &quot;-dev&quot; or &quot;-dbg&quot; are more oriented for developers or those compiling applications. &quot;-doc&quot; are document oriented packages. I believe in your case you want the &lt;code&gt;libdbus-glib-1-2&lt;/code&gt; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libdbus-glib-1-2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="892" LastActivityDate="2015-08-19T04:05:39.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1396" PostTypeId="2" ParentId="1387" CreationDate="2015-08-19T04:14:04.223" Score="1" Body="&lt;p&gt;I am not seeing a way to add proxy exceptions to network config. I would recommend editing the &lt;code&gt;/etc/environment&lt;/code&gt; file manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launch an editor to modify the environment file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/environment&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add another line to the file for domains where you don't want to use a proxy by setting the &lt;code&gt;no_proxy&lt;/code&gt; variable. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;no_proxy=&quot;localhost,127.0.0.1,localaddress,.localdomain.com&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="892" LastActivityDate="2015-08-19T04:14:04.223" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1397" PostTypeId="2" ParentId="1227" CreationDate="2015-08-19T09:24:58.623" Score="2" Body="&lt;p&gt;try installing trackpad software, this solved my problem&#xA;* cat /proc/bus/input/devices&#xA;* I had to use a glidepoint driver&lt;/p&gt;&#xA;" OwnerUserId="967" LastActivityDate="2015-08-19T09:24:58.623" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1399" PostTypeId="1" CreationDate="2015-08-19T11:30:35.683" Score="4" ViewCount="1182" Body="&lt;p&gt;I'm running elementary Freya 64 bit and using the Nvidia binary driver v340.76.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yesterday some upgrades were installed, including apparently the kernel version &lt;code&gt;3.16.0-46-generic&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I rebooted the system and it hanged on &lt;code&gt;Restoring resolver state…&lt;/code&gt;. The only way I could get it to boot was to select the previous kernel (&lt;code&gt;3.16.0-45-generic&lt;/code&gt;) from the advanced options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried the answer given &lt;a href=&quot;https://askubuntu.com/q/478205/55128&quot;&gt;here&lt;/a&gt;, basically adding &lt;code&gt;acpi=force&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/default/grub&#xA;GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash acpi=force”&#xA;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas how to solve this?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-21T10:46:18.843" Title="elementary OS hangs at boot at 'Restoring resolver state…'" Tags="|release-freya|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1400" PostTypeId="2" ParentId="1363" CreationDate="2015-08-19T14:08:32.740" Score="0" Body="&lt;p&gt;This did it for me. Although I had to run boot-repair twice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/278/cannot-boot-freya-after-installing-alongside-windows-on-uefi?rq=1&quot;&gt;Cannot boot Freya after installing alongside Windows on UEFI&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="949" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-19T14:08:32.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1401" PostTypeId="1" AcceptedAnswerId="1402" CreationDate="2015-08-19T14:49:03.043" Score="1" ViewCount="7148" Body="&lt;p&gt;I have a new PC. It has an SSD with just 128GB of space, and an internal HDD with 1TB space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am about to install elementary OS as my primary OS and so I am wondering how I should partition the drives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am thinking I should install the OS onto the SSD, and have everything else on the larger internal drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how do I do this during setup using the partitioning tool? Do I select the SSD for / (root) and select the other drive for the swap area and /Home?&lt;/p&gt;&#xA;" OwnerUserId="962" LastActivityDate="2015-08-19T15:01:22.170" Title="How should I partition my drives?" Tags="|system-installation|software-installation|hardware|ubuntu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1402" PostTypeId="2" ParentId="1401" CreationDate="2015-08-19T15:01:22.170" Score="3" Body="&lt;p&gt;Personally, I would prefer to keep the other(non-SSD) drive for Storage only. No system folders like Home etc. For installing the system(in the SSD) I would prefer create about 8 Gigs for swap space and install /(root) in the remaining space-this would automatically create the /home folder. &lt;br/&gt;&lt;br/&gt;&#xA;128 Gigs of SSD is more than enough for a core install of Elementary OS and therefore creating a separate /home partition would not serve a lot of purpose. A separate /home partition is mostly necessary only when you are constantly installing new distros(and don't want user related /home data to be deleted-so you need to only format the /(root) partition in each new install) or if there are multiple distros side by side sharing the same /home partition(which BTW contains all the non-system user files) for convenience.&#xA;Since you are only going to use Elementary OS- I would not advise partitioning the SSD separately for /home-it's just extra effort for no good reason.&lt;br/&gt;&lt;br/&gt;&#xA;But if you &lt;strong&gt;really&lt;/strong&gt; want to do so, I would suggest about 30 Gigs partition for the /(root), 8 for swap(as previously) and the rest for /home. All this from the SSD only. Hope I helped.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastActivityDate="2015-08-19T15:01:22.170" CommentCount="28" ContentLicense="CC BY-SA 3.0" />
  <row Id="1406" PostTypeId="1" AcceptedAnswerId="1407" CreationDate="2015-08-19T15:59:26.637" Score="1" ViewCount="698" Body="&lt;p&gt;I had a blinking-cursor black screen freeze on my dual-boot Freya/Windows 8.1 system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have restored the grub and can recover my Windows files. How can I restore Windows 8.1 to healthy dual-boot with GRUB in charge?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the Boot Issues file: &lt;a href=&quot;http://paste2.org/CawB5V2E&quot; rel=&quot;nofollow&quot;&gt;Boot-Repair BootInfo summary&lt;/a&gt;&#xA;Working through &quot;Boot-Repair&quot; utility: &lt;a href=&quot;http://paste2.org/FndWwIkH&quot; rel=&quot;nofollow&quot;&gt;BootInfo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="948" LastEditorUserId="948" LastEditDate="2015-08-19T16:18:31.270" LastActivityDate="2015-08-19T18:10:40.263" Title="How-Do I Repair a Dual-boot (Windows 8.1) from Elementary OS Freya? GRUB has been restored, but Windows will not boot" Tags="|dual-boot|" AnswerCount="1" CommentCount="1" ClosedDate="2015-12-31T14:06:01.370" ContentLicense="CC BY-SA 3.0" />
  <row Id="1407" PostTypeId="2" ParentId="1406" CreationDate="2015-08-19T16:19:47.353" Score="1" Body="&lt;p&gt;Run &lt;code&gt;sudo update-grub&lt;/code&gt; in terminal after booting into elementary. This should detect your Windows 8.1 partition and automatically add it to grub.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastEditorUserId="26" LastEditDate="2015-08-19T18:10:40.263" LastActivityDate="2015-08-19T18:10:40.263" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1408" PostTypeId="1" CreationDate="2015-08-19T17:01:45.410" Score="3" ViewCount="323" Body="&lt;p&gt;I have tried to install wine (using &lt;code&gt;apt-get install wine&lt;/code&gt;) up today.&#xA;However, after working a bit, the whole desktop decided to hang and I couldn't move the mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;IIRC, it was showing up &quot;processing triggers for libc6&quot; when that happened. I needed to force shutdown and restart elementary OS again and I did not have issue after then, but Wine was not installed and for that reason i could not start it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now when I am trying to do anything with &lt;em&gt;apt-get&lt;/em&gt; it says :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E: dpkg a été interrompu. Il est nécessaire d'utiliser « sudo dpkg --configure -a » pour corriger le problème.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Which in english should mean :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E: dpkg was stopped. You need to use &quot;sudo dpkg --configure -a&quot; to fix this problem.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;However, when I am doing so, it tries to end up the Wine installation again and so crashes again. &#xA;It requires me to use this command even if I try uninstalling Wine, so now I cannot use &lt;code&gt;apt-get&lt;/code&gt; (and probably nothing dpkg-related).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I doubt this issue is related to Wine, but because of some download corruption. However I cannot manage to cancel anything I've done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably marking the wine package as not installed would be a very bad workaround but it would work. Is there any way to do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It probably could be a kernel panic as well, however, nothing showed up on the screen - It just decided to hang and I couldn't even move the cursor. I cannot find anything about a kernel crash in &lt;code&gt;/var/crash&lt;/code&gt;. Attempting switching TTYs with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; didn't work neither.&lt;/p&gt;&#xA;" OwnerUserId="972" LastEditorUserId="2708" LastEditDate="2015-11-26T07:09:57.343" LastActivityDate="2015-12-05T22:01:45.750" Title="Everything hangs on installing wine" Tags="|system|apt|wine|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1410" PostTypeId="1" AcceptedAnswerId="1413" CreationDate="2015-08-19T20:00:01.000" Score="2" ViewCount="383" Body="&lt;p&gt;While trying to install Elementary OS on my DELL 15 3543 there's serious problem with display.  Captions are missing, icons are not displayed.. same is happening while using OS as live CD (or USB). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ybGJ0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ybGJ0.jpg&quot; alt=&quot;Display problems&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="975" LastActivityDate="2015-08-21T18:03:29.903" Title="Dell Inspiron 3543 Intel HD Graphics - Installation, display problems" Tags="|display|" AnswerCount="2" CommentCount="0" ClosedDate="2015-09-30T21:39:24.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="1411" PostTypeId="1" CreationDate="2015-08-19T20:12:18.633" Score="0" ViewCount="1642" Body="&lt;p&gt;I can't connect to the internet on my ASUS Desktop ROG G20AJ PC. I believe it has something to do with not having the correct drivers installed. I have built in wireless but cannot connect or detect any networks - even after manually adding a wireless network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I manually download and install the driver(s)? And how do I know which ones to download/install?&lt;/p&gt;&#xA;" OwnerUserId="448" LastActivityDate="2015-09-19T01:38:13.367" Title="Can't connect to Internet. Networks not being detected. Fresh installation" Tags="|release-freya|settings|luna|networking|ubuntu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1412" PostTypeId="1" CreationDate="2015-08-19T22:18:06.840" Score="1" ViewCount="561" Body="&lt;p&gt;I'm experiencing a little problem &lt;strong&gt;after a power outage&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When opening &lt;strong&gt;any app&lt;/strong&gt; from the icon dock (Plank), these are opened at end and not pointing to same original icon. In fact, Sublimetext editor opens with another old icon (it used to open correctly before power outage).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V2XIa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V2XIa.png&quot; alt=&quot;Icons open at right&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've Elementary Luna with some icon packs installed, but I'm not sure if that is the problem. Maybe something from Plank got corrupt in the power outage?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;PS: For those whom are reporting this question as duplicate, I've already checked the Chrome bug, tried it, but didn't work. And also, this happens with all apps/icons from Plank, not only Chrome&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="95" LastEditorUserId="95" LastEditDate="2015-08-20T13:21:14.017" LastActivityDate="2015-10-22T00:12:03.773" Title="All Icons from Plank dock have a strange behaviour after power outage" Tags="|plank|icons|luna|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1413" PostTypeId="2" ParentId="1410" CreationDate="2015-08-20T00:10:18.877" Score="0" Body="&lt;p&gt;I found &lt;a href=&quot;https://askubuntu.com/questions/596393/thinkpad-t450s-intel-hd-graphics-5500-ubuntu-14-04-unstable&quot;&gt;this&lt;/a&gt;. Go through this. According to the only answer-a kernel upgrade will solve the problem, which is expected since the kernel upgrade comes with a newer 3.19 kernel with updated Intel graphics drivers. So I would suggest 2 things: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Don't install Elementary OS yet and try something else (like Ubuntu 15.04) with a newer kernel. Try a LiveUSB/CD and see if it works properly. Its better to wait for the Elementary team to let their system upgrade to a newer kernel so that it is nicely supported on all sides.&lt;/li&gt;&#xA;&lt;li&gt;Try installing it on the laptop somehow and then upgrade the kernel following &lt;a href=&quot;http://www.linuxandubuntu.com/home/linux-kernel-3-19-3-released-install-update-in-ubuntu-linux-mint-other-debian-based-distros&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide. But I &lt;strong&gt;do not&lt;/strong&gt; recommend this since after the upgrade you do not get security bug fixes(from Ubuntu security repos) and any problems(due to untested kernel) and bugs will not guarantee any support from the elementary team. But if you are feeling adventurous, go ahead. At your own risk. :)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerDisplayName="user922" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-08-20T00:10:18.877" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1414" PostTypeId="2" ParentId="1411" CreationDate="2015-08-20T01:09:26.597" Score="1" Body="&lt;p&gt;&lt;strong&gt;Identifying a Network device&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running the &lt;code&gt;sudo lshw -c network&lt;/code&gt; command in a terminal will display information regarding all network devices including the chipset and current driver in use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;lspci&lt;/code&gt; or &lt;code&gt;lsusb&lt;/code&gt; commands also provide useful information on all PCI/USB devices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Driver Installation&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please update your question with the chipset and driver (if any) from the above commands and we can attempt to find a solution for this part.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-20T01:09:26.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1415" PostTypeId="1" AcceptedAnswerId="1425" CreationDate="2015-08-20T03:25:26.363" Score="1" ViewCount="937" Body="&lt;p&gt;Hi the wingpanel indicator says the battery is 100% charged. When i click on to the battery statistics it shows that it is just shy of being full but is no longer charging and is labeled as charged.&#xA;  Its energy shows 23.5 Wh of 23.7 Wh. I know its just barely shy but i have seen it charge to full before. Anyone know whats going on or how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screen shot. &lt;a href=&quot;https://i.stack.imgur.com/CqkGb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CqkGb.png&quot; alt=&quot;battery Screen shot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="870" LastEditorUserId="870" LastEditDate="2016-01-19T19:38:24.110" LastActivityDate="2017-08-13T03:00:24.413" Title="Says laptop battery is 100% but its not completely" Tags="|system|hardware|power|battery|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1416" PostTypeId="1" CreationDate="2015-08-20T05:03:46.660" Score="1" ViewCount="857" Body="&lt;p&gt;I've recently started to use Linux, and elementary OS and I've to say that it's great, everything works really nice, just have to get used to it. But I have one problem which makes me upset. I've installed Wine and tried to use my only 1 game which I have on laptop, and it runs, however not so fine as it is mentioned on Wine forums. I'm using an Acer 5755g which isn't the best for that game, but should run it on low settings really nice. Although im getting around 8-25FPS on Wine, is it a normal situation, or maybe i have some bad settings on elementary OS ?? For example on Win8.1 im getting like 30-50fps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the best and waiting for some help&lt;/p&gt;&#xA;" OwnerUserId="978" LastEditorUserId="34" LastEditDate="2015-08-20T14:34:41.723" LastActivityDate="2015-08-20T14:34:41.723" Title="World of Warcraft-Wine-low fps" Tags="|wine|" AnswerCount="1" CommentCount="2" ClosedDate="2016-03-09T22:51:24.790" ContentLicense="CC BY-SA 3.0" />
  <row Id="1417" PostTypeId="2" ParentId="1067" CreationDate="2015-08-20T07:12:18.993" Score="1" Body="&lt;p&gt;have you tried using pulse audio?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;open it and check the configuration tab and you will find options there. I am using elementary OS and found the same option though haven't used it.&lt;/p&gt;&#xA;" OwnerUserId="945" LastActivityDate="2015-08-20T07:12:18.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1418" PostTypeId="2" ParentId="18" CreationDate="2015-08-20T07:25:26.673" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/applications/google-chrome.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll find a line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Exec=/usr/bin/google-chrome-stable %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I changed mine to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=google-chrome %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After restarting Google Chrome the icon was all shiny and nice :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="945" LastActivityDate="2015-08-20T07:25:26.673" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1419" PostTypeId="1" AcceptedAnswerId="1432" CreationDate="2015-08-20T07:41:37.430" Score="0" ViewCount="267" Body="&lt;p&gt;I  have two mail addresses, so I have two accounts at geary. But somehow geary moves automatically all my emails in my second account to the trash bin. Is there any way to stop it from doing this?&lt;/p&gt;&#xA;" OwnerUserId="903" LastEditorUserId="2708" LastEditDate="2015-12-27T06:03:50.113" LastActivityDate="2015-12-27T06:03:50.113" Title="geary move mails to the trash, I don't want that" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1420" PostTypeId="1" AcceptedAnswerId="1421" CreationDate="2015-08-20T08:52:04.493" Score="2" ViewCount="147" Body="&lt;p&gt;I'm new in elementary OS. Yesterday, I tried booting from pen drive and it's very nice. Unfortunately, I can't install it because my HDD stopped working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I left the laptop doing updates in the night and today. When I've gone to see if everything is ok, nothing appears on the screen, I only see the mouse. Maybe the computer went to suspension, and elementary OS could not start from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me?&lt;/p&gt;&#xA;" OwnerUserId="981" LastEditorUserId="3757" LastEditDate="2016-05-05T07:14:45.057" LastActivityDate="2016-05-05T07:14:55.840" Title="elementary OS &quot;Suspender&quot;" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1421" PostTypeId="2" ParentId="1420" CreationDate="2015-08-20T09:10:56.413" Score="3" Body="&lt;p&gt;Are you updating while working from the live USB pendrive itself? Or have you updated it after installing to your HDD? Or have you installed it to another pendrive? (I assume the first one because you said your HDD is not working-still mention it clearly)&lt;br/&gt; If you are updating from the pendrive then it is of no use because when you shutdown, restart the computer and boot again from the &lt;em&gt;live USB pendrive&lt;/em&gt; then &lt;em&gt;all the updates will be gone&lt;/em&gt; and the system will be like a fresh un-updated elementary OS. Please clarify it in your question or here in the comments.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastEditorUserId="3757" LastEditDate="2016-05-05T07:14:55.840" LastActivityDate="2016-05-05T07:14:55.840" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="1422" PostTypeId="2" ParentId="1415" CreationDate="2015-08-20T09:31:18.907" Score="2" Body="&lt;p&gt;A lot of laptops(like mine) have a BIOS configuration which sends the information as charging done when the battery has charged &gt;=98 %. In Windows there are specific chipset drivers which correct this disparity to indicate exact values(as of Windows 7 they have to be installed). However, in Linux, they are often shown to be charged. So that is not an issue. AFAIK, this small error has been corrected in newer versions of Ubuntu.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastActivityDate="2015-08-20T09:31:18.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1423" PostTypeId="2" ParentId="1416" CreationDate="2015-08-20T10:06:27.240" Score="1" Body="&lt;h2&gt;A primer on how Wine works&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;As it name states, &quot;Wine Is Not an Emulator&quot;. Wine doesn't create a Windows environment that .exes can live in: it relies on the use of fake libraries to &lt;em&gt;trick&lt;/em&gt; .exes into thinking they're talking with Windows, when really it's just the Linux kernel in disguise. As such, it will be faster than an emulator (ie, Virtualbox) but may still be slower than Windows itself.&#xA;&lt;strong&gt;The fact that your game runs slower is probably a normal behaviour, but you may be able to configure it to run better.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;A few hints:&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Update your Nvidia drivers (you seem to have an &lt;strong&gt;NVIDIA GeForce GT 630M&lt;/strong&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Use OpenGL (probably better FPS but lower graphics quality) with your game.&lt;/li&gt;&#xA;&lt;li&gt;Look up your game in the &lt;a href=&quot;https://appdb.winehq.org/&quot; rel=&quot;nofollow&quot;&gt;Wine Application Database&lt;/a&gt;, as they may already have a solution to your low frame rates.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;How can we help you further?&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Give us your configuration, not just the model of your laptop.&lt;/li&gt;&#xA;&lt;li&gt;Give us more details on your problem (the name of your game, which version of elementary OS you are running...)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="157" LastActivityDate="2015-08-20T10:06:27.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1424" PostTypeId="1" CreationDate="2015-08-20T10:35:30.903" Score="6" ViewCount="2387" Body="&lt;p&gt;I am trying to figure out how to disable the launcher icon bounce in Plank. Please help.&lt;/p&gt;&#xA;" OwnerUserId="983" LastEditorUserId="45" LastEditDate="2015-08-21T17:51:12.823" LastActivityDate="2015-08-21T17:51:12.823" Title="Disable icon bounce in Plank" Tags="|plank|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1425" PostTypeId="2" ParentId="1415" CreationDate="2015-08-20T12:28:19.853" Score="2" Body="&lt;p&gt;Calibrating the battery may help with this. To calibrate it you just need to fully charge it, then use it and discharge completely and charge it again til 100%.&lt;br&gt;&#xA;If you still experience the same issue then is probably what cheekyngeeky pointed out.&lt;/p&gt;&#xA;" OwnerUserId="984" LastActivityDate="2015-08-20T12:28:19.853" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1426" PostTypeId="1" AcceptedAnswerId="1427" CreationDate="2015-08-20T12:54:54.073" Score="2" ViewCount="263" Body="&lt;p&gt;I recently upgraded from Luna to Freya. I formatted my 20GB &lt;code&gt;root&lt;/code&gt; partition, but I kept my 80GB &lt;code&gt;/home&lt;/code&gt; partition. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had elementary tweaks installed and I was running &lt;code&gt;super-wingpanel&lt;/code&gt; instead of the default &lt;code&gt;wingpanel&lt;/code&gt;. When I upgraded to Freya, I no longer had &lt;code&gt;elementary-tweaks&lt;/code&gt; installed, but for some reason, my system was still trying to run &lt;code&gt;super-wingpanel&lt;/code&gt; which resulted in frustration because now I had no &lt;code&gt;wingpanel&lt;/code&gt; at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I solved the problem by installing tweaks for Freya and then under Cerbere, I removed the &lt;code&gt;super-wingpanel&lt;/code&gt; entry and added an entry for &lt;code&gt;wingpanel&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why did these settings persist from my Luna installation to my clean install of Freya? Is there a way to fix Cerbere without installing the Freya tweaks ppa?&lt;/p&gt;&#xA;" OwnerUserId="985" LastActivityDate="2015-08-20T13:51:52.407" Title="what happens to tweaks after upgrade from luna to freya" Tags="|release-freya|wingpanel|updates|cerbere|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1427" PostTypeId="2" ParentId="1426" CreationDate="2015-08-20T13:51:52.407" Score="3" Body="&lt;p&gt;Just as a reminder/disclaimer elementary tweaks has never been supported by the elementary OS developers (for reasons like this). These settings persisted because elementary tweaks modified &lt;strong&gt;&lt;em&gt;user&lt;/em&gt;&lt;/strong&gt; settings (not system settings) and since you kept your &lt;code&gt;/home&lt;/code&gt; partition intact the settings were not overwritten. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All your user settings are stored in a GSettings file located in &lt;code&gt;~/.config/dconf/user&lt;/code&gt;. If you wanted to completely reset all of your user settings, you &lt;em&gt;could&lt;/em&gt; rename this file and start from a blank slate. However, I would not recommend doing so. If you wanted to just change the Cerbere setting, you could have reset it to the default by running the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.desktop.cerbere monitored-processes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-08-20T13:51:52.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1428" PostTypeId="2" ParentId="1424" CreationDate="2015-08-20T14:27:14.330" Score="13" Body="&lt;p&gt;You can create a custom theme that disables the bounce animation by following these steps:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You will first need to create a new directory for the custom theme. It is important that you give it a unique name that does not conflict with any existing theme names.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.local/share/plank/themes/no-bounce&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Assuming that you are using the default theme (elementary), make a copy of the theme to your user directory. Other default themes are located in &lt;code&gt;/usr/share/plank/themes&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/themes/elementary/plank/dock.theme ~/.local/share/plank/themes/no-bounce/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit the theme file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/plank/themes/no-bounce/dock.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for the line that starts with &lt;code&gt;LaunchBounceTime&lt;/code&gt;. Modify it to &lt;code&gt;LaunchBounceTime=0&lt;/code&gt;. Save the file and exit the editor.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open your dock settings to change it to the custom theme.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.config/plank/dock1/settings&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for the line that starts with &lt;code&gt;Theme&lt;/code&gt;. Modify it to &lt;code&gt;Theme=no-bounce&lt;/code&gt;. Save the file and exit the editor.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Your dock icons should no longer bounce when you launch them.&lt;/p&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-08-21T12:58:08.350" LastActivityDate="2015-08-21T12:58:08.350" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1430" PostTypeId="1" AcceptedAnswerId="1433" CreationDate="2015-08-20T16:39:16.360" Score="0" ViewCount="1120" Body="&lt;p&gt;I'm reading a book about the command line and am poking around my system.  I noticed a file inside &lt;code&gt;/tmp/dumps&lt;/code&gt; called 'user_stdout.txt', 'user' being my first name.  This text file contained chats/stats/game maps/other info all from a steam game session I played last night.  Just wondering what and why files are dumped?&lt;/p&gt;&#xA;" OwnerUserId="591" LastEditorUserId="45" LastEditDate="2015-09-01T17:29:23.297" LastActivityDate="2015-09-01T17:29:23.297" Title="What is the file /tmp/dumps/user_stdout.txt?" Tags="|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1431" PostTypeId="1" CreationDate="2015-08-20T16:56:05.930" Score="6" ViewCount="3137" Body="&lt;p&gt;I try since some days to install and make work ibus on Freya but in not work, I want use it for Vietnamese writing. The layout in the default input methods is not good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of some one can give me some clues for make it work it will be amazing.&lt;/p&gt;&#xA;" OwnerUserId="987" LastEditorUserId="26" LastEditDate="2016-05-02T22:35:30.827" LastActivityDate="2016-05-02T22:35:30.827" Title="How do I install ibus on Freya?" Tags="|ibus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1432" PostTypeId="2" ParentId="1419" CreationDate="2015-08-20T17:40:50.067" Score="2" Body="&lt;p&gt;Are you using IMAP or POP3 to get your email? Mail clients using POP3 generally delete emails from the server after downloading them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you could post a screenshot of your mail settings (excluding usernames or other personal info, of course), that might help folks troubleshoot. I'd be interested to see what's different between the two accounts.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2015-08-20T17:40:50.067" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1433" PostTypeId="2" ParentId="1430" CreationDate="2015-08-20T20:19:27.520" Score="3" Body="&lt;p&gt;This is not a standard system file. Any application can write to the &lt;code&gt;/tmp&lt;/code&gt; directory; it's meant for temporary files only. Given the content, presumably  the developer of that game (or a library that this game uses) decided to write some stuff in this file. It might be debugging information that they forgot to remove before distributing the software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any well-written program would not use a file name such as this since there's a risk of collision between two applications. End-user software should be writing such logs under the user's home directory anyway.&lt;/p&gt;&#xA;" OwnerUserId="190" LastActivityDate="2015-08-20T20:19:27.520" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1434" PostTypeId="2" ParentId="373" CreationDate="2015-08-20T22:20:14.767" Score="3" Body="&lt;p&gt;Here is an alternative option assuming you are using the text editor that came with Elementary OS. In the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/lightdm/lightdm.conf.d/40-pantheon-greeter.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When it opens up in scratch, add the following line to the end of the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;greeter-setup-script=/usr/bin/numlockx on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the file and restart the computer. At the login screen, the numlock key should be turned on. Also, when you log out, it will also remain on at the login screen.&lt;/p&gt;&#xA;" OwnerUserId="989" LastEditorUserId="84" LastEditDate="2015-08-21T20:17:36.153" LastActivityDate="2015-08-21T20:17:36.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1435" PostTypeId="2" ParentId="373" CreationDate="2015-08-20T23:11:00.897" Score="3" Body="&lt;p&gt;This may not apply to you, but it will apply to others out there. Some BIOS's have an option to turn it on automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, the ASUS ROG G20AJ Gaming PC's BIOS has this option.&lt;/p&gt;&#xA;" OwnerUserId="990" LastEditorUserId="990" LastEditDate="2015-08-21T20:02:48.237" LastActivityDate="2015-08-21T20:02:48.237" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1436" PostTypeId="1" CreationDate="2015-08-20T23:31:15.023" Score="0" ViewCount="689" Body="&lt;p&gt;I installed Elementary OS Freya this morning, and I setup the partitions as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;swaparea:    17GB&lt;/li&gt;&#xA;&lt;li&gt;/home   :    50GB&lt;/li&gt;&#xA;&lt;li&gt;/       :    50GB&lt;/li&gt;&#xA;&lt;li&gt;reserved bios boot thingy:    1024MB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And this is on a 128GB SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my problem is, why is Elementary OS Freya telling me that I am completely out of disk space? I have not installed anything &lt;em&gt;other than&lt;/em&gt; the OS itself, and I left more than enough room on each partition.&lt;/p&gt;&#xA;&#xA;&lt;hr /&gt;&#xA;&#xA;&lt;p&gt;This is really weird, and I hope someone can help shed some light on this.&lt;/p&gt;&#xA;&#xA;&lt;hr /&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;df -h&lt;/code&gt; output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;me@me:~$ df -h&#xA;Filesystem      Size  Used Avail Use% Mounted on&#xA;/dev/sdb1        28G   26G  8.0K 100% /&#xA;none            4.0K     0  4.0K   0% /sys/fs/cgroup&#xA;udev            7.8G  4.0K  7.8G   1% /dev&#xA;tmpfs           1.6G  1.5M  1.6G   1% /run&#xA;none            5.0M     0  5.0M   0% /run/lock&#xA;none            7.8G   92K  7.8G   1% /run/shm&#xA;none            100M   52K  100M   1% /run/user&#xA;/dev/sdb4       976M  3.4M  972M   1% /boot/efi&#xA;/dev/sdb3        71G  139M   67G   1% /home&#xA;me@me:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="990" LastEditorUserId="990" LastEditDate="2015-08-21T00:29:33.033" LastActivityDate="2015-08-22T00:13:29.213" Title="Why is Freya telling me I have no disk space left?" Tags="|release-freya|files|system|disk-management|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="1437" PostTypeId="1" CreationDate="2015-08-21T02:14:54.333" Score="18" ViewCount="4382" Body="&lt;p&gt;A while ago I found a site that stated that elementary OS supports ARM processors, however I have not been able to confirm this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OS is a very nice experience and would go well on my &lt;b&gt;Samsung Tab S 10.5&lt;/b&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is ARM support native?&lt;/li&gt;&#xA;&lt;li&gt;If not, are there plans for ARM support?&lt;/li&gt;&#xA;&lt;li&gt;If not, is there a way to make elementary OS work on ARMv7 processors?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="993" LastEditorUserId="5565" LastEditDate="2016-10-05T01:00:18.060" LastActivityDate="2021-06-24T16:46:55.347" Title="Support for ARM processors and Raspberry Pi?" Tags="|software-installation|hardware|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1438" PostTypeId="2" ParentId="1436" CreationDate="2015-08-21T03:44:09.727" Score="2" Body="&lt;p&gt;The best possible thing I can think of is 'your options did not save' at the time of partitioning and the installer somehow pointed to system defaults. Did you really save your partition settings before proceeding (and did not do back/forward clicks)?&lt;/p&gt;&#xA;" OwnerUserId="994" LastEditorUserId="994" LastEditDate="2015-08-22T00:13:29.213" LastActivityDate="2015-08-22T00:13:29.213" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1439" PostTypeId="2" ParentId="1431" CreationDate="2015-08-21T04:25:37.723" Score="3" Body="&lt;p&gt;Support for ibus on elementary is not yet complete, but you can still use it with some inconsistencies I just tested it and the only problem was the indicator on wingpanel that didn't update accordingly when switching between different input methods (not a problem if you are only going to use the Vietnamese layout).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should have &lt;code&gt;ibus-unikey&lt;/code&gt; installed, if you don't do it with this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ibus-unikey&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now configure ibus through &lt;code&gt;ibus-setup&lt;/code&gt;. To do this, run the command on a terminal and go to the &lt;code&gt;input method&lt;/code&gt; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the box beside &quot;Customize active input methods&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uxaSL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uxaSL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click the menu below, scroll all the way to the bottom, and select Vietnamese &gt; Unikey.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1v0mb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1v0mb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally click on the add button and make sure you left Unikey as the active input method, then close the window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RRaE3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RRaE3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you should be able to type using Unikey. To switch layouts use &lt;kbd&gt;Ctrl + Space &lt;/kbd&gt;, ( instead of the default &lt;kbd&gt; Alt + Space &lt;/kbd&gt; ), if you want to change this shortcut then this has to be done from &lt;code&gt;ibus-setup&lt;/code&gt; on the General tab and not from the shortcuts GUI on Switchboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dC5st.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dC5st.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="146" LastActivityDate="2015-08-21T04:25:37.723" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1440" PostTypeId="1" CreationDate="2015-08-21T07:42:40.737" Score="1" ViewCount="410" Body="&lt;p&gt;I noticed recently a rather low performance in 3D games that are usually very little demanding for my machine, such as Team Fortress. This game can be run with no issues using only one of the GPUs, and it runs just fine, but lately I've been noticing big frame drops when there was a lot of shots or characters fighting on screen. I then came to realize that my laptop is getting damn hot. Also, after rebooting into Windows, the fans kick in at maximum power for a bit until temperature lowers down. So fans seem inactive at Elementary. What can I do to enable/check on them? Is there any GUI controlling tool?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Current Kernel: 3.16.0-46-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="370" LastEditorUserId="370" LastEditDate="2015-08-24T10:46:09.880" LastActivityDate="2015-08-24T10:46:09.880" Title="Lenovo Ideapad y510p overheats on Freya" Tags="|power|temperature|" AnswerCount="1" CommentCount="3" ClosedDate="2015-08-25T17:30:15.003" ContentLicense="CC BY-SA 3.0" />
  <row Id="1441" PostTypeId="1" AcceptedAnswerId="1479" CreationDate="2015-08-21T08:11:39.530" Score="18" ViewCount="10384" Body="&lt;p&gt;What are the different possibilities (both keyboard and mouse) to switch:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;between windows of the same application on the same workspace,&lt;/li&gt;&#xA;&lt;li&gt;between windows of all applications on the same workspace,&lt;/li&gt;&#xA;&lt;li&gt;between the two most recently used workspaces?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="147" LastEditorUserId="147" LastEditDate="2015-08-23T17:25:16.773" LastActivityDate="2023-11-18T18:40:29.757" Title="What are the different methods to switch between windows and workspaces?" Tags="|window-management|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1442" PostTypeId="1" CreationDate="2015-08-21T08:23:40.567" Score="19" ViewCount="2790" Body="&lt;p&gt;What happens with my data, if I do not enable Privacy Mode in System Settings?&#xA;What data does elementary OS collect from my device in general?&#xA;And is the Amazon Web Search which Ubuntu implemented still active?&lt;/p&gt;&#xA;" OwnerUserId="996" LastEditorUserId="3757" LastEditDate="2016-03-11T03:08:51.980" LastActivityDate="2019-12-06T06:21:30.880" Title="Does elementary OS perform any sort of remote data collection?" Tags="|settings|ubuntu|security|privacy|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1443" PostTypeId="2" ParentId="1442" CreationDate="2015-08-21T10:42:36.437" Score="11" Body="&lt;h3&gt;Ubuntu&lt;/h3&gt;&#xA;&lt;p&gt;Ubuntu uses Unity as its desktop environment and this contains the code for Amazon Web Search and collecting data.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h3&gt;elementary OS&lt;/h3&gt;&#xA;&lt;p&gt;elementary OS has its own desktop environment called Pantheon which like most desktop environments remembers recently used files to enable extra functionality in certain applications while using the OS. This data isn't collected and sent to elementary or any third parties. Enabling privacy mode is akin to incognito mode in a web browser. Also the error reporting, which you can decide whether or not to send, is anonymous. Note the following statement on the elementary.io website.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HedyE.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HedyE.png&quot; alt=&quot;elementary OS statement&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-21T20:06:15.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1444" PostTypeId="2" ParentId="1442" CreationDate="2015-08-21T12:45:57.177" Score="6" Body="&lt;p&gt;When &lt;code&gt;Privacy Mode&lt;/code&gt; is not enabled then only non-personal diagnostic data(which you can see if you want to-just click on &lt;code&gt;More Details&lt;/code&gt; when any such dialog box opens) to Ubuntu. Unlike Windows, you can &lt;strong&gt;see&lt;/strong&gt; this sent data completely and this data is totally anonymous-does not even contain your computer's name or Computer Model. And you can even turn it off in relevant settings. Also, the data from the list that is shown on that dialog page(where &lt;code&gt;Privacy Mode&lt;/code&gt; button is there) is &lt;strong&gt;stored on your computer only&lt;/strong&gt; for allowing you to access files, music etc. faster. It is &lt;strong&gt;not&lt;/strong&gt; sent over any network to any servers out of your computer.&lt;a href=&quot;https://i.stack.imgur.com/9JOUX.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9JOUX.png&quot; alt=&quot;Data is saved on your computer only&quot;&gt;&lt;/a&gt; &lt;br/&gt; The privacy settings are mostly useful when someone is say sharing your account on a corporate network-in which case they can see your past activity if &lt;code&gt;Privacy Mode&lt;/code&gt; is not turned on. But if only use your account, it is safe to keep &lt;code&gt;Privacy Mode&lt;/code&gt; turned off. You can ,obviously, also set up specific apps to prevent data collection from them.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastActivityDate="2015-08-21T12:45:57.177" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1445" PostTypeId="2" ParentId="1440" CreationDate="2015-08-21T13:15:52.703" Score="4" Body="&lt;p&gt;I am assuming you are running on a stock version of Freya with kernel 3.16.&lt;br/&gt; I looked up the internet a bit for your laptop configuration and it seems that you have a NVidia dual GPU. Kernel 3.16 does not support relatively modern Nvidia GPUs (like the GT 755M) properly-because of Nvidia(who BTW Linus Torwalds, the creator of Linux, gave a middle finger...publicly) which does not release the drivers for its models. &lt;br/&gt;&#xA;So I would not suggest playing games on elementary OS on your configuration. I myself have an AMD discrete GPU and only recently it has got fairly good support on Linux. This is also the reason why your laptop is getting really hot. The Nvidia card without proper drivers support sucks in a lot of unnecessary power causing circuits to get hot and the fan to kick in at full speed. Then when you reboot into Windows, the circuits are still hot and the drivers put adjust the system so that it cools down as soon as possible.&lt;br/&gt;&#xA;I would suggest(any one of the following, preferably try 3, 2 4,5 ,6 and if nothing works then 1)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Using a Linux distro with a newer Kernel(like Ubuntu 15.04)&lt;/li&gt;&#xA;&lt;li&gt;Install tlp from &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html#installation&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. When installed, open a terminal and activate tlp using &lt;code&gt;sudo tlp start&lt;/code&gt;.THis is saved across restarts. When you connect to AC adapter, your laptop will run as it is now. When you remove the AC cable, it will run on low power mode. &lt;/li&gt;&#xA;&lt;li&gt;Install powertop from the Software Center via &lt;code&gt;sudo apt-get install powertop&lt;/code&gt; in the terminal. Then open it- &lt;code&gt;sudo powertop&lt;/code&gt; in terminal. Then press Tab number of times till you reach the the &lt;code&gt;Tunables&lt;/code&gt;section. Press Enter to change each option with &quot;Bad&quot; to &quot;Good&quot; and up down keys to navigate the list. When done changing all to &quot;Good&quot;, press Esc or Ctrl+c to exit powertop. Everytime you restart, you will have to configure powertop again using the methods in this point(starting from &lt;code&gt;sudo powertop&lt;/code&gt;)-the settings are not saved across restarts. &lt;a href=&quot;https://01.org/sites/default/files/page/powertop_users_guide_201412.pdf&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is the official User Guide on powertop-you &lt;strong&gt;don't need&lt;/strong&gt; to read it though.&lt;/li&gt;&#xA;&lt;li&gt;Installing Nvidia drivers from their official site after &lt;strong&gt;checking all the release notes&lt;/strong&gt; otherwise if your kernel is not supported, then it could lead to the system unable to boot&lt;/li&gt;&#xA;&lt;li&gt;Install &lt;strong&gt;bumblebee&lt;/strong&gt;-since I am on AMD, I don't know a lot about Nvidia drivers but I heard about this project on a lot of discussions. Check out this project &lt;a href=&quot;http://bumblebee-project.org/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. If I were you I would use it with a grain of salt because the drivers seem to be last released in 2013-check if your system(Ubuntu 14.04-elementary OS is based on this) and graphics card are supported&lt;/li&gt;&#xA;&lt;li&gt;Disable the discrete Nvidia graphics card and use the integrated Intel Graphics card-a little Google search will help&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerDisplayName="user922" LastEditorDisplayName="user922" LastEditDate="2015-08-21T13:30:41.733" LastActivityDate="2015-08-21T13:30:41.733" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1446" PostTypeId="1" CreationDate="2015-08-21T14:38:20.713" Score="1" ViewCount="74" Body="&lt;p&gt;Maximized application looks like this after removing HDMI cable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nloW4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nloW4.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1000" LastActivityDate="2015-08-21T14:38:20.713" Title="Half the screen problem after removing HDMI cable" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1447" PostTypeId="1" CreationDate="2015-08-21T16:04:53.743" Score="6" ViewCount="929" Body="&lt;p&gt;I have lots of important development files and set up in my Ubuntu installation. But now after trying elementary OS, I'd like to make it my primary OS. Since everything in Linux is a file, I was thinking of a way to have everything in my Ubuntu migrated here. Will copying the &lt;code&gt;/home&lt;/code&gt; folder or &lt;code&gt;/etc&lt;/code&gt; do it? Or will I have to manually install all the programs?&lt;/p&gt;&#xA;" OwnerUserId="1002" LastEditorDisplayName="user968" LastEditDate="2015-08-21T20:17:47.783" LastActivityDate="2015-08-21T23:37:50.653" Title="Migrating from Ubuntu to elementary OS" Tags="|ubuntu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1448" PostTypeId="1" CreationDate="2015-08-21T16:23:48.997" Score="2" ViewCount="215" Body="&lt;p&gt;I was working on unetbootin with my usb plugged in and searching for &quot;downloads&quot; file when the app says there is no &quot;downloads&quot; file. Then I went to check for my self and upon clicking on downloads it said that there isn't any downloads file, after that, all other maps started dissapearing(trash was empty). I restarted the computer and went to login, but it wouldn't let me. Tried several times with restarts, although guest session works just fine. What do I do? &lt;/p&gt;&#xA;" OwnerUserId="1003" LastActivityDate="2015-08-21T20:19:58.057" Title="Says there is no home file(or any other whatsoever). Upon restart won't let me log in, even though guest session works just fine." Tags="|release-freya|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1449" PostTypeId="2" ParentId="1447" CreationDate="2015-08-21T17:40:55.700" Score="5" Body="&lt;p&gt;I would advise against trying to copy over configuration files from Ubuntu, like those found in &lt;code&gt;/etc&lt;/code&gt; or &lt;code&gt;~/.config&lt;/code&gt;. There will most likely be incompatibilities that could cause issues over the long term.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also recommend re-installing your apps since elementary OS provides different versions than Ubuntu for some very important libraries and some apps.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-21T17:40:55.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1450" PostTypeId="2" ParentId="1410" CreationDate="2015-08-21T18:03:29.903" Score="1" Body="&lt;p&gt;You can try to install with nomodeset option, to prevent kernel load a wrong graphic driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start your laptop from usb. When you see the grub boot menu, use your down arrow and go to &quot;Install elementary OS &quot; and rather than press enter key, press &quot;e&quot; key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, you can see the boot options. Use your down arrow again and go to a line that look like:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &quot;nomodeset&quot; after &quot;splash&quot;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then press ctrl + X to boot the new grub entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After install elementary OS,  you will can configure your graphic driver.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-08-21T18:03:29.903" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1451" PostTypeId="2" ParentId="1448" CreationDate="2015-08-21T20:19:58.057" Score="3" Body="&lt;p&gt;There is a problem with lightdm config. Start your system. When you stay at login screen, switch to console with Ctrl+Alt+F1 and log in with your username and password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv ~/.Xauthority ~/.Xauthority.back&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Switch to your login screen with Ctrl+Alt+F7 and try log in again. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-08-21T20:19:58.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1453" PostTypeId="1" AcceptedAnswerId="1454" CreationDate="2015-08-21T23:05:45.113" Score="3" ViewCount="2222" Body="&lt;p&gt;Where may I download the &lt;em&gt;very latest &lt;strong&gt;stable&lt;/strong&gt; version of elementary OS &lt;strong&gt;Luna&lt;/strong&gt;&lt;/em&gt;?&lt;/p&gt;&#xA;&#xA;&lt;hr /&gt;&#xA;&#xA;&lt;p&gt;Freya, unfortunately, is too unstable at this time. And while I write a wireless device driver for the ROG G20AJ Desktop PC, I'd prefer to be writing it in a more stable version of elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But they've taken elementary OS Luna down from their site, and the one on SourceForge - well, I have no idea which one to pick. Does anyone have a direct, official link?&lt;/p&gt;&#xA;" OwnerUserId="990" LastEditorUserId="5565" LastEditDate="2016-10-05T06:27:16.523" LastActivityDate="2016-10-05T06:27:16.523" Title="Where can I download elementary OS Luna, now that Freya has been released?" Tags="|system-installation|luna|" AnswerCount="2" CommentCount="4" ClosedDate="2016-10-05T19:23:02.003" ContentLicense="CC BY-SA 3.0" />
  <row Id="1454" PostTypeId="2" ParentId="1453" CreationDate="2015-08-21T23:17:57.623" Score="5" Body="&lt;p&gt;This seems pretty direct and official to me: &lt;a href=&quot;http://sourceforge.net/projects/elementaryos/files/stable/elementaryos-stable-amd64.20130810.iso/download&quot;&gt;http://sourceforge.net/projects/elementaryos/files/stable/elementaryos-stable-amd64.20130810.iso/download&lt;/a&gt; ;)&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-08-21T23:17:57.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1455" PostTypeId="2" ParentId="1447" CreationDate="2015-08-21T23:37:50.653" Score="2" Body="&lt;p&gt;I would use Aptik to backup applications and settings for compatible applications (Firefox, Thunderbird, etc). Saves a lot of time re-installing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Back up your Documents, Videos, Pictures, Downloads, etc folders to an another drive so you can restore afterwards.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-08-21T23:37:50.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1456" PostTypeId="2" ParentId="1437" CreationDate="2015-08-22T00:05:17.500" Score="12" Body="&lt;p&gt;There are currently no ARM images you can download from elementary. However, we do build armhf packages in our &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable&quot;&gt;stable&lt;/a&gt; and &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/os-patches&quot;&gt;os-patches&lt;/a&gt; repositories. This means you could theoretically attempt installing an ARM compatible version of Ubuntu, add our repositories, and install the Pantheon desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ARM images are something we're interested in provided in the future.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-22T00:05:17.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1457" PostTypeId="1" AcceptedAnswerId="1459" CreationDate="2015-08-22T05:16:42.160" Score="11" ViewCount="2923" Body="&lt;p&gt;I am trying to keep pantheon-terminal always on top. I installed gnome terminal also but I cant find any option to keep always on top.&lt;/p&gt;&#xA;" OwnerUserId="945" LastEditorUserId="242" LastEditDate="2015-10-27T18:45:09.793" LastActivityDate="2015-10-27T18:45:09.793" Title="How to set the terminal to &quot;always on top&quot; in elementary OS?" Tags="|window-management|gala|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1458" PostTypeId="1" AcceptedAnswerId="1463" CreationDate="2015-08-22T07:58:42.553" Score="6" ViewCount="1177" Body="&lt;p&gt;Right now my UI is without wingpanel. I using stable ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log:-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wingpanel&#xA;[_LOG_LEVEL_INFO 23:17:05.546919] Application.vala:155: Wingpanel version: 0.3.0.2&#xA;[_LOG_LEVEL_INFO 23:17:05.546998] Application.vala:157: Kernel version: 3.16.0-43-generic&#xA;[_LOG_LEVEL_WARN 23:17:05.551314] Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-NGnsKDnTTM: Connection refused&#xA;[_LOG_LEVEL_WARN 23:17:05.612371] [GLib-GObject] cannot add interface type 'GeeIterable' to type 'SynapseResultSet' which does not conform to prerequisite 'GeeTraversable'&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After these were updated:-&#xA;&lt;a href=&quot;https://i.stack.imgur.com/jdp8z.png&quot; rel=&quot;noreferrer&quot;&gt;https://i.stack.imgur.com/jdp8z.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1487571&quot; rel=&quot;noreferrer&quot;&gt;Bug reported&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="811" LastActivityDate="2015-08-24T21:51:09.863" Title="wingpanel crashing after update" Tags="|wingpanel|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1459" PostTypeId="2" ParentId="1457" CreationDate="2015-08-22T08:01:26.337" Score="13" Body="&lt;p&gt;Although disabled by default, you can assign a keyboard shortcut to enable any window to stay on top in Gala. Simply assign your desired key combination to the &lt;strong&gt;Toggle always on Top&lt;/strong&gt; option located under &lt;em&gt;System Settings -&gt; Keyboard -&gt; Shortcuts -&gt; Windows.&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dSwh3.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dSwh3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-22T08:01:26.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1460" PostTypeId="1" AcceptedAnswerId="1825" CreationDate="2015-08-22T10:55:25.097" Score="5" ViewCount="4160" Body="&lt;p&gt;&lt;strong&gt;Default state:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Enable bluetooth&lt;/li&gt;&#xA;&lt;li&gt;Connect to paired bluetooth headset&lt;/li&gt;&#xA;&lt;li&gt;Sound &gt; Output &gt; &quot;Device for sound output&quot; remains &quot;Speakers - Built-in Audio&quot;&lt;/li&gt;&#xA;&lt;li&gt;Switch &quot;Device for sound output&quot; to bluetooth headset&lt;/li&gt;&#xA;&lt;li&gt;Set Profile from HSP/HFP to A2DP&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Desired state:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Enable bluetooth&lt;/li&gt;&#xA;&lt;li&gt;Connect to paired bluetooth headset&lt;/li&gt;&#xA;&lt;li&gt;Sound &gt; Output &gt; Device for sound output is automatically switched to the bluetooth headset&lt;/li&gt;&#xA;&lt;li&gt;Profile is automatically switched from HSP/HFP to A2DP&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;EDITED AS NO OTHER APPARENT WAY TO ANSWER AN INVALIDLY CLOSED QUESTION:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;su -&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;pre&gt;&#xA;printf &quot;# 2015-10-23&#xA;# Autoconnect to audio sink as soon as presented&#xA;# source: http://askubuntu.com/questions/8409/autoconnecting-bluetooth-devices&#xA;load-module module-switch-on-connect&quot; &gt;&gt; /etc/pulse/default.pa &amp;&amp; service pulseaudio restart &amp;&amp; exit&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Testing:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Onboard Bluetooth control state: on&lt;/li&gt;&#xA;&lt;li&gt;Powered on *previously paired* Bluetooth headset&lt;/li&gt;&#xA;&lt;li&gt;Watched funny cat video on Youtube.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="147" LastEditorUserId="2852" LastEditDate="2015-10-25T12:41:54.430" LastActivityDate="2015-10-25T12:41:54.430" Title="How to automatically switch to connected Bluetooth headset and enable A2DP mode?" Tags="|sound|bluetooth|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-06T08:00:57.287" ContentLicense="CC BY-SA 3.0" />
  <row Id="1461" PostTypeId="2" ParentId="1282" CreationDate="2015-08-22T13:08:01.470" Score="3" Body="&lt;p&gt;As per x2go Client's &quot;&lt;a href=&quot;http://wiki.x2go.org/doku.php/doc:de-compat&quot; rel=&quot;nofollow&quot;&gt;Desktop Environment Compatibility&lt;/a&gt;&quot; page, Elementary OS's &quot;Pantheon&quot; shell (of the Gnome Desktop Environment) is officially not supported.  You could open a new bug report with &quot;wishlist&quot; severity, following the instructions &lt;a href=&quot;http://wiki.x2go.org/doku.php/wiki:bugs&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.  It won't be easy to support Pantheon, because there's already other rather difficult problems blocking x2go client's support of the newest Gnome versions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another option might be to install a second desktop environment (such as XFCE, or LXDE, which x2go client fully supports) on your Elementary OS box, alongside Pantheon.  But that would be a kludge, and I wouldn't be surprised if you encountered many problems and annoyances, because XFCE and LXDE wouldn't use Elementary's &quot;switchboard&quot; technology.  &lt;strong&gt;Elementary OS strongly assumes you'll use Pantheon, and only Pantheon.&lt;/strong&gt;  You can't choose between DE's at the lightdm login screen, for instance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If x2go is crucial for you right now, consider switching to a Linux distro such as LXLE, which uses LXDE from the get-go.  Just like Elementary, LXLE is designed to be very lightweight.&lt;/p&gt;&#xA;" OwnerUserId="1010" LastEditorUserId="1010" LastEditDate="2015-08-22T14:48:33.073" LastActivityDate="2015-08-22T14:48:33.073" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1463" PostTypeId="2" ParentId="1458" CreationDate="2015-08-22T14:57:17.027" Score="2" Body="&lt;p&gt;This could very well be caused by &lt;code&gt;indicator-synapse&lt;/code&gt; (a 3rd party search indicator similar to Spotlight on OSX) which frequently poses a problem with Freya. Try to uninstall it by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and restart your machine:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -r now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1358490&quot; rel=&quot;nofollow&quot;&gt;This is in fact a bug of Synapse, not WingPanel.&lt;/a&gt; If you have installed Synapse from a PPA and don't need it for anything else I would strongly suggest removing this PPA as well. &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Use Synapse anyway&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;If you want to use Synapse anyway, you can try to install it from this PPA, after completing the steps from above. Be aware, it is called &quot;unstable&quot; for a reason: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/unstable-upstream&#xA;sudo apt-get update&#xA;sudo apt-get install indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-08-24T21:51:09.863" LastActivityDate="2015-08-24T21:51:09.863" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1464" PostTypeId="1" CreationDate="2015-08-22T16:39:40.723" Score="2" ViewCount="848" Body="&lt;p&gt;Please somebody share the installation procedure for UEFI system ASUS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not able to install grub.&lt;/p&gt;&#xA;" OwnerUserId="1012" LastEditorUserId="3757" LastEditDate="2016-05-06T01:33:40.890" LastActivityDate="2016-05-06T01:33:40.890" Title="How to install elementary in a UEFI ASUS system?" Tags="|uefi|asus|" AnswerCount="1" CommentCount="0" ClosedDate="2016-05-07T10:40:34.437" ContentLicense="CC BY-SA 3.0" />
  <row Id="1465" PostTypeId="1" CreationDate="2015-08-22T17:15:06.583" Score="2" ViewCount="267" Body="&lt;p&gt;If I set Turn off screen when inactive  when plugged in then the same value is also in On battery. So I cannot set right for only when plugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This must be a bug either in my setup or in Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does any one know have to that is right?&lt;/p&gt;&#xA;" OwnerUserId="929" LastActivityDate="2015-08-23T03:39:11.043" Title="Elementary OS system setting for power has problem" Tags="|release-freya|power|" AnswerCount="1" CommentCount="0" ClosedDate="2015-08-24T02:45:00.047" ContentLicense="CC BY-SA 3.0" />
  <row Id="1466" PostTypeId="1" AcceptedAnswerId="1467" CreationDate="2015-08-22T19:52:48.537" Score="4" ViewCount="92" Body="&lt;p&gt;I'm really keen to tackle some minor bug-fixes (I hope) for Elementary OS but am struggling to find the relevant source code amongst the plethora of source code branches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Major barriers to me finding the relavant source are &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;being new to BZR&lt;/li&gt;&#xA;&lt;li&gt;being new to Launchpad&lt;/li&gt;&#xA;&lt;li&gt;being new to dealing with Linux distribution projects and how they are built and structured&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The bugs I would like to look into both relate to the keyboard settings dialog/application:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1487760&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1487760&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1486857&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1486857&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone offer any pointers for where to look for the source? Plus any online resources for grokking how these projects hang together and are built?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Footnote: I have already found the source repo(s)? for the OS on launchpad and have managed to checkout the trunk and build the ISO. Looking at the source of that branch showed very little code however, and I am struggling to see where it is pulling in all its pieces.&lt;/p&gt;&#xA;" OwnerUserId="884" LastEditorUserId="884" LastEditDate="2015-08-22T20:02:50.233" LastActivityDate="2015-08-23T08:23:02.617" Title="How can I find the source code that relates to keyboard settings UIs" Tags="|settings|keyboard|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1467" PostTypeId="2" ParentId="1466" CreationDate="2015-08-22T21:55:29.317" Score="5" Body="&lt;p&gt;In this case, there is a separate project in Launchpad: &lt;a href=&quot;https://launchpad.net/switchboard-plug-keyboard&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/switchboard-plug-keyboard&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also of interest to anyone else starting out like I am is this google doc on building large-scale Ubuntu derivatives. The doc is here: &lt;a href=&quot;https://docs.google.com/document/d/1RPPF14h1Sw2gQjGTuZjUIlNHnGrafS8ekhFjJM9MT00/edit&quot; rel=&quot;nofollow&quot;&gt;https://docs.google.com/document/d/1RPPF14h1Sw2gQjGTuZjUIlNHnGrafS8ekhFjJM9MT00/edit&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terms of how the various components of the distro hang together - they each are packaged and built individually, the main build distro simply has a pointer to each package. So you could remove the package from the distro by removing a line of code. A user could then install the package separately themselves (please someone correct me if I have this wrong).&lt;/p&gt;&#xA;" OwnerUserId="884" LastEditorUserId="884" LastEditDate="2015-08-23T08:23:02.617" LastActivityDate="2015-08-23T08:23:02.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1468" PostTypeId="1" AcceptedAnswerId="1471" CreationDate="2015-08-23T00:31:02.330" Score="2" ViewCount="979" Body="&lt;p&gt;It seems all the function keys are active by default on my lenovo t450s with elementary OS Freya. E.g. &lt;kbd&gt;F5&lt;/kbd&gt; and &lt;kbd&gt;F6&lt;/kbd&gt; control screen brightness on press. Usually I have to hold or hit the &lt;kbd&gt;Fn&lt;/kbd&gt; key first. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how I can get the original functionality back of using the &lt;kbd&gt;Fn&lt;/kbd&gt; key to toggle the function keys?&lt;/p&gt;&#xA;" OwnerUserId="870" LastEditorUserId="34" LastEditDate="2015-09-03T20:47:42.817" LastActivityDate="2016-04-06T21:14:59.957" Title="Function keys on t450s always active" Tags="|release-freya|system|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1469" PostTypeId="2" ParentId="1193" CreationDate="2015-08-23T00:50:17.970" Score="4" Body="&lt;p&gt;I was having some charging issues as well. I was able to fix this by either letting it fully discharge to the point of shutdown then recharge it fully to calibrate it or by letting it discharge then charging it fully with the computer shutdown. Hope either will work for you as well!&lt;/p&gt;&#xA;" OwnerUserId="870" LastEditorUserId="870" LastEditDate="2015-08-23T03:36:50.157" LastActivityDate="2015-08-23T03:36:50.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1470" PostTypeId="2" ParentId="1465" CreationDate="2015-08-23T03:39:11.043" Score="0" Body="&lt;p&gt;I believe the only settings affected by the &lt;em&gt;Plugged In&lt;/em&gt; and &lt;em&gt;On Battery&lt;/em&gt; buttons are those &lt;strong&gt;below&lt;/strong&gt; them on the power settings dialog, not those above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you post a feature request on the &lt;em&gt;switchboard-power-plug&lt;/em&gt; &lt;a href=&quot;https://launchpad.net/switchboard-plug-power&quot; rel=&quot;nofollow&quot;&gt;bug tracker&lt;/a&gt; if you would like additional plugged in / on battery functionality.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-23T03:39:11.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1471" PostTypeId="2" ParentId="1468" CreationDate="2015-08-23T04:26:08.460" Score="4" Body="&lt;p&gt;This is usually a BIOS setting. If there is nothing in there (perhaps it is &lt;a href=&quot;https://support.lenovo.com/au/en/products/laptops-and-netbooks/thinkpad-t-series-laptops/thinkpad-t450s/documents/HT074187?tabName=Solutions&quot; rel=&quot;nofollow noreferrer&quot;&gt;set to Ctrl&lt;/a&gt; rather than Fn), you could try pressing &lt;kbd&gt;Fn&lt;/kbd&gt;+&lt;kbd&gt;Esc&lt;/kbd&gt; to toggle &lt;em&gt;FnLock&lt;/em&gt; as is &lt;a href=&quot;https://unix.stackexchange.com/questions/91616/does-the-fn-lock-fnlk-on-thinkpad-t440s-work-well-with-linux&quot;&gt;reported&lt;/a&gt; to work on earlier Thinkpad models. &lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2015-08-23T04:26:08.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1472" PostTypeId="1" CreationDate="2015-08-23T07:27:58.923" Score="1" ViewCount="193" Body="&lt;p&gt;I use &lt;a href=&quot;http://gottcode.org/focuswriter/&quot; rel=&quot;nofollow noreferrer&quot;&gt;FocusWriter&lt;/a&gt; as my prefered distraction free writing editor. I installed it using the developer's &lt;a href=&quot;https://launchpad.net/~gottcode/+archive/ubuntu/gcppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa:gottcode/gcppa&lt;/a&gt; ppa. Being a Qt application, by default FocusWriter does not use the elementary OS's theming. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tIxLc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tIxLc.png&quot; alt=&quot;FocusWriter menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any recommendations how to better integrate FocusWriter into the elementary OS design?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="3757" LastEditDate="2016-04-25T07:45:43.543" LastActivityDate="2016-04-25T07:45:43.543" Title="How to integrate FocusWriter into the elementary OS theming?" Tags="|themes|qt|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1474" PostTypeId="1" CreationDate="2015-08-23T13:49:57.690" Score="6" ViewCount="882" Body="&lt;p&gt;I'm new with elementary OS but I have used ubuntu for a while before. I was trying to install Steam and I had a problem, I had to install a lib of 32bits (ia32-libs) and all good, but today, I was trying to install RVM to install Ruby and RoR, and for install it, I get an error while doing &lt;code&gt;apt-get update&lt;/code&gt; (I read about it in Stack Overflow), and I have some errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err http://ppa.launchpad.net trusty/main amd64 Packages 404  Not Found&#xA;Err http://ppa.launchpad.net trusty/main i386 Packages 404  Not Found&#xA;W: Imposible obtener http://ppa.launchpad.net/compiz/ppa/ubuntu/dists/trusty/main/binary-amd64/Packages 404  Not Found&#xA;W: Imposible obtener http://ppa.launchpad.net/compiz/ppa/ubuntu/dists/trusty/main/binary-i386/Packages 404  Not Found&#xA;W: Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/source/Sources 404  Not Found&#xA;W: Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages 404  Not Found&#xA;W: Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages 404  Not Found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried with synaptic I get it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/source/Sources 404  Not Found&#xA;Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages 404  Not Found&#xA;Imposible obtener http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages 404  Not Found&#xA;Algunos archivos de índice fallaron al descargar. Se han ignorado, o se han utilizado unos antiguos en su lugar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sorry the messages are in Spanish.&#xA;&quot;imposible obtener&quot; == &quot;Imposible to get&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;algunos archivos de indice fallaron al descargar. Se han ignorado o se han utilizado unos antiguos en su lugar&quot; == &quot;Some files of index fail at downloading. They are ignored or used olders&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read that they are problems with repositories, tried commands like &lt;code&gt;&quot;apt-get autoclean&lt;/code&gt; and more, and I used &lt;code&gt;deborphan&lt;/code&gt; who say what repositories are useless (I think) and I purge it with &lt;code&gt;sudo apt-get --purge remove $(deborpahn)&lt;/code&gt; but the errors don't disappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I restore all the repositories to the default state? Or how can I solve these errors?&lt;/p&gt;&#xA;" OwnerUserId="1018" LastEditorUserId="190" LastEditDate="2015-08-28T23:28:00.827" LastActivityDate="2015-08-28T23:28:00.827" Title="Can I restore apt-get sources to the default?" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1475" PostTypeId="1" CreationDate="2015-08-23T14:53:11.303" Score="1" ViewCount="1534" Body="&lt;p&gt;I'm trying to dual boot on my laptop Win 10 and elementary OS on the same SSD. The problem is when I go to install elementary OS (something else option) my Win 10 partition doesn't appear so I cannot continue, otherwise I would wipe the Win 10 installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something that I'm missing? I've done it before without any problem, just used the option of &quot;install it alongside Windows&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, secure boot is disabled and the partition for elementary OS isn't formatted (Unallocated).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tl,dr I haven't found any similar question here but if it's duplicated, please remove after pointing me in the right direction please! Noob here.&lt;/p&gt;&#xA;" OwnerUserId="415" LastEditorUserId="34" LastEditDate="2015-08-23T18:17:45.803" LastActivityDate="2015-08-24T08:02:57.593" Title="Dual boot, elementary OS not detecting windows partition" Tags="|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="0" ClosedDate="2015-08-25T08:25:55.290" ContentLicense="CC BY-SA 3.0" />
  <row Id="1476" PostTypeId="1" CreationDate="2015-08-23T14:53:21.510" Score="1" ViewCount="204" Body="&lt;p&gt;Some time ago I installed Ubuntu on my old laptop. How can Install elementary OS Freya from CD on Ubuntu? I tried booting, changing bios settings to boot CD first but it won't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what happens when I boot it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://benyouhuifile.it168.com/forum/201309/20/0154295o6vffvvo5zfq2p5.jpg&quot; rel=&quot;nofollow&quot;&gt;http://benyouhuifile.it168.com/forum/201309/20/0154295o6vffvvo5zfq2p5.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then it just goes to Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="1019" LastEditorUserId="45" LastEditDate="2015-10-05T18:34:54.080" LastActivityDate="2015-10-05T18:34:54.080" Title="Booting elementary OS Freya from CD" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1477" PostTypeId="1" CreationDate="2015-08-23T17:16:58.893" Score="5" ViewCount="5726" Body="&lt;p&gt;Anyone experiencing random screen flicker, blink, pulse, flashing when on single and dual monitor, or opening multiple windows at once?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS &amp;amp; VERSION&#xA;elementary OS 0.3 Freya (64-bit)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HARDWARE&#xA;Sony Vaio Laptop (2006)&#xA;Processor: Dual-Core Intel® Core™2 Duo CPU     T6400  @ 2.00GHz&#xA;Graphics: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)&lt;/p&gt;&#xA;" OwnerUserId="905" LastEditorUserId="905" LastEditDate="2015-08-25T01:19:49.097" LastActivityDate="2015-08-25T01:19:49.097" Title="Screen flicker, blink, pulse, flash" Tags="|release-freya|display|desktop|graphics|" AnswerCount="1" CommentCount="3" ClosedDate="2015-08-24T18:07:20.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="1478" PostTypeId="2" ParentId="1477" CreationDate="2015-08-23T17:37:23.623" Score="4" Body="&lt;p&gt;If you have an intel graphic chip, you could try comment nr 5&lt;br&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861&quot; rel=&quot;nofollow&quot;&gt;Screen flickering solution&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="158" LastActivityDate="2015-08-23T17:37:23.623" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1479" PostTypeId="2" ParentId="1441" CreationDate="2015-08-23T18:20:56.187" Score="18" Body="&lt;h1&gt;Windows&lt;/h1&gt;&#xA;&lt;p&gt;You can switch between windows several ways:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Click on the window you want to switch to&lt;/li&gt;&#xA;&lt;li&gt;Click on the app's icon in the dock&lt;/li&gt;&#xA;&lt;li&gt;Hover over the app's icon in the dock and scroll up and down&lt;/li&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;To see an overview of your open app windows, press &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;W&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://blog.elementary.io/os-7-1-available-now/#gesture-and-keyboard-navigation&quot; rel=&quot;nofollow noreferrer&quot;&gt;In elementaryOS 7.1 (Horus)&lt;/a&gt; and later, switch windows of the open application with &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;~&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;You can customize these shortcuts through System Settings → Keyboard → Shortcuts → Windows.&lt;/p&gt;&#xA;&lt;h1&gt;Hot Corners&lt;/h1&gt;&#xA;&lt;p&gt;You can also configure &amp;quot;hot corners&amp;quot; (shortcuts activated by placing your cursor in the corner of the display) to activate multi-tasking functions like the window overview, workspace overview, and more.&lt;/p&gt;&#xA;&lt;p&gt;You can customize hot corners through System Settings → Desktop → Hot Corners.&lt;/p&gt;&#xA;&lt;h1&gt;Workspaces&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;To see an overview of your workspaces, press &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt;, or &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;⬇&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;To quickly move left or right through your workspaces, press &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;←&lt;/kbd&gt; or &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;→&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;To cycle through your workspaces, press &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;You can jump straight to a specific workspace by pressing &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;1&lt;/kbd&gt; through &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;9&lt;/kbd&gt;. You can always jump to a new workspace with &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;0&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;li&gt;You can also drag app windows between workspaces by dragging their icons in the workspace overview. To see an overview of app windows across all workspaces, press &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;You can customize these shortcuts through System Settings → Keyboard → Shortcuts → Workspaces.&lt;/p&gt;&#xA;&lt;h2&gt;Note:&lt;/h2&gt;&#xA;&lt;p&gt;&lt;kbd&gt;⌘&lt;/kbd&gt; refers to the &amp;quot;super&amp;quot; key. It is also known as the &amp;quot;Windows&amp;quot; key on most PCs or the &amp;quot;Command&amp;quot; key on Macs.&lt;/p&gt;&#xA;&lt;p&gt;This information is taken from the &amp;quot;&lt;a href=&quot;https://elementary.io/docs/learning-the-basics&quot; rel=&quot;nofollow noreferrer&quot;&gt;Learning The Basics&lt;/a&gt;&amp;quot; guide on elementary.io&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="13077" LastEditDate="2023-11-18T18:40:29.757" LastActivityDate="2023-11-18T18:40:29.757" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="1480" PostTypeId="2" ParentId="1474" CreationDate="2015-08-23T18:25:08.777" Score="7" Body="&lt;p&gt;You have a couple of PPAs which appear to no longer exist. Both of these PPAs (from compiz and versable) are not default elementary software sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can remove software sources with the &quot;Software &amp;amp; Updates&quot; configuration tool. This is accessible either by searching for it in Slingshot or by opening Software Updater and selecting &quot;Settings...&quot; in the bottom left corner.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-23T18:25:08.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1481" PostTypeId="1" CreationDate="2015-08-23T19:14:34.550" Score="1" ViewCount="152" Body="&lt;p&gt;Is there any way to set time limits on a user?  We have children and want to limit the time they spend on it.  The user admin section is a bit slim on that.&lt;/p&gt;&#xA;" OwnerUserId="1022" LastActivityDate="2015-08-23T23:59:15.847" Title="User time limits" Tags="|settings|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1482" PostTypeId="2" ParentId="1481" CreationDate="2015-08-23T19:40:26.143" Score="2" Body="&lt;h3&gt;elementary OS&lt;/h3&gt;&#xA;&lt;p&gt;Currently, elementary doesn't provide parental controls. However, it's something that's &lt;a href=&quot;https://bugs.launchpad.net/pantheon-plugs/+bug/1326088&quot; rel=&quot;nofollow noreferrer&quot;&gt;on their radar&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h3&gt;Timekpr App&lt;/h3&gt;&#xA;&lt;p&gt;You could try &lt;a href=&quot;http://www.omgubuntu.co.uk/2014/05/timekpr-restrict-computer-access-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;timekpr&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It should fit your intention. It would be nice to tell us, if this worked as&#xA;expected.&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-08-23T23:59:15.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1483" PostTypeId="1" AcceptedAnswerId="1822" CreationDate="2015-08-23T21:38:08.937" Score="3" ViewCount="342" Body="&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: &lt;a href=&quot;https://help.ubuntu.com/community/OpenSound&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/OpenSound&lt;/a&gt; says &quot;Canonical/Ubuntu has chosen to disable OSS support in their kernels and ignore any bugs filed against OSS4 packages.&quot; The question is, do the drivers provided by 4Front work on their own or do they require OSS4?&lt;/p&gt;&#xA;&#xA;&lt;hr/&gt;&#xA;&#xA;&lt;p&gt;I have just installed elementary OS 0.3 Freya and followed this by installing the Open Sound System for Linux by 4Front technologies. I used the DEB package from the opensound website, which was picked up by the Software Center. I had a warning about code quality, which I happily ignored.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the command line, osstest will correctly play sounds through both speakers but the card itself, a LynxTWO from Lynx Studio Technology doesn't show up in the elementary &quot;Sound Settings&quot;. Here is the partial output of osstest, before it goes on to other channels:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sound subsystem and version: OSS 4.2 (b 2011/201501272304) (0x00040100)&#xA;Platform: Linux/x86_64 3.16.0-48-generic #64~14.04.1-Ubuntu SMP Thu Aug 20 23:03:57 UTC 2015&#xA;&#xA;*** Scanning sound adapter #-1 ***&#xA;/dev/oss/lynxtwo0/pcm0 (audio engine 0): LynxTWO-A Play 1&#xA;- Performing audio playback test... &#xA;  &amp;lt;left&amp;gt; OK &amp;lt;right&amp;gt; OK &amp;lt;stereo&amp;gt; OK &amp;lt;measured srate 48044.00 Hz (0.09%)&amp;gt; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The OSS install also added some utilities, like &lt;code&gt;ossinfo&lt;/code&gt;. The output seems fine:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Version info: OSS 4.2 (b 2011/201501272304) (0x00040100) &#xA;Platform: Linux/x86_64 3.16.0-48-generic #64~14.04.1-Ubuntu SMP Thu Aug 20 23:03:57 UTC 2015 (greg-eos)&#xA;&#xA;Number of audio devices:    27&#xA;Number of audio engines:    31&#xA;Number of MIDI devices:     0&#xA;Number of mixer devices:    4&#xA;&#xA;&#xA;Device objects&#xA; 0: osscore0 OSS core services&#xA; 1: lynxtwo0 LynxTWO-A interrupts=168 (168)&#xA;    Firmware revision: 32 PCB Revision 2&#xA; 2: oss_hdaudio0 Intel HD Audio interrupts=809 (809)&#xA;    HD Audio controller Intel HD Audio&#xA;    Vendor ID    0x80861c20&#xA;    Subvendor ID 0x10438444&#xA;     Codec  0: ALC887 (0x10ec0887/0x10438444)&#xA;     Codec  3: Unknown (0x80862805/0x80862805)&#xA; 3: oss_usb0 USB audio core services&#xA;&#xA;MIDI devices (/dev/midi*)&#xA;&#xA;Mixer devices&#xA; 0: LynxTWO-A Adapter (Mixer 0 of device object 1)&#xA; 1: LynxTWO-A Record/Play (Mixer 1 of device object 1)&#xA; 2: LynxTWO-A Outputs (Mixer 2 of device object 1)&#xA; 3: High Definition Audio ALC887 (Mixer 0 of device object 2)&#xA;&#xA;Audio devices&#xA;LynxTWO-A Play 1                  /dev/oss/lynxtwo0/pcm0  (device index 0)&#xA;LynxTWO-A Play 2                  /dev/oss/lynxtwo0/pcm1  (device index 1)&#xA;LynxTWO-A Play 3                  /dev/oss/lynxtwo0/pcm2  (device index 2)&#xA;LynxTWO-A Play 4                  /dev/oss/lynxtwo0/pcm3  (device index 3)&#xA;LynxTWO-A Play 5                  /dev/oss/lynxtwo0/pcm4  (device index 4)&#xA;LynxTWO-A Play 6                  /dev/oss/lynxtwo0/pcm5  (device index 5)&#xA;LynxTWO-A Play 7                  /dev/oss/lynxtwo0/pcm6  (device index 6)&#xA;LynxTWO-A Play 8                  /dev/oss/lynxtwo0/pcm7  (device index 7)&#xA;LynxTWO-A Record 1                /dev/oss/lynxtwo0/pcmin0  (device index 8)&#xA;LynxTWO-A Record 2                /dev/oss/lynxtwo0/pcmin1  (device index 9)&#xA;LynxTWO-A Record 3                /dev/oss/lynxtwo0/pcmin2  (device index 10)&#xA;LynxTWO-A Record 4                /dev/oss/lynxtwo0/pcmin3  (device index 11)&#xA;LynxTWO-A Record 5                /dev/oss/lynxtwo0/pcmin4  (device index 12)&#xA;LynxTWO-A Record 6                /dev/oss/lynxtwo0/pcmin5  (device index 13)&#xA;LynxTWO-A Record 7                /dev/oss/lynxtwo0/pcmin6  (device index 14)&#xA;LynxTWO-A Record 8                /dev/oss/lynxtwo0/pcmin7  (device index 15)&#xA;LynxTWO-A 7.1 output              /dev/oss/lynxtwo0/pcm8  (device index 16)&#xA;HD Audio play front               /dev/oss/oss_hdaudio0/pcm0  (device index 17)&#xA;HD Audio play rear                /dev/oss/oss_hdaudio0/pcm1  (device index 18)&#xA;HD Audio play center/LFE          /dev/oss/oss_hdaudio0/pcm2  (device index 19)&#xA;HD Audio play side                /dev/oss/oss_hdaudio0/pcm3  (device index 20)&#xA;HD Audio play pcm4                /dev/oss/oss_hdaudio0/pcm4  (device index 21)&#xA;HD Audio play spdif-out           /dev/oss/oss_hdaudio0/spdout0  (device index 22)&#xA;HD Audio play spdifout            /dev/oss/oss_hdaudio0/spdout1  (device index 23)&#xA;HD Audio play spdifout            /dev/oss/oss_hdaudio0/spdout2  (device index 24)&#xA;HD Audio rec mix                  /dev/oss/oss_hdaudio0/pcmin0  (device index 25)&#xA;HD Audio rec mix                  /dev/oss/oss_hdaudio0/pcmin1  (device index 26)&#xA;&#xA;Nodes&#xA;  /dev/dsp -&amp;gt; /dev/oss/oss_hdaudio0/pcm0&#xA;  /dev/dsp_in -&amp;gt; /dev/oss/lynxtwo0/pcmin0&#xA;  /dev/dsp_out -&amp;gt; /dev/oss/lynxtwo0/pcm0&#xA;  /dev/dsp_ac3 -&amp;gt; /dev/oss/oss_hdaudio0/spdout0&#xA;  /dev/dsp_mmap -&amp;gt; /dev/oss/lynxtwo0/pcm0&#xA;  /dev/dsp_multich -&amp;gt; /dev/oss/lynxtwo0/pcm8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And, again &lt;code&gt;osstest&lt;/code&gt; manages to play the test tune fine. What further steps are required to make elementary OS notice the existence of this card, or the integrated Intel HD Audio?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edits: soundcard spec added, discovered cli tools for OSS.&lt;/p&gt;&#xA;" OwnerUserId="1024" LastEditorUserId="34" LastEditDate="2015-12-31T13:55:52.310" LastActivityDate="2015-12-31T13:55:52.310" Title="after installing oss-linux, soundcard doesn't show up in GUI despite working at CLI" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1485" PostTypeId="2" ParentId="1475" CreationDate="2015-08-23T23:57:59.873" Score="0" Body="&lt;p&gt;Read your question wrong just select install something else and make your own partitions a swap 2x ram and rest to / &lt;/p&gt;&#xA;" OwnerUserId="1028" LastActivityDate="2015-08-23T23:57:59.873" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1525" PostTypeId="1" AcceptedAnswerId="1528" CreationDate="2015-08-24T02:43:30.263" Score="3" ViewCount="357" Body="&lt;p&gt;I am having trouble updating applications. I get the following &lt;a href=&quot;https://i.stack.imgur.com/pDXMc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;error&lt;/a&gt; when running the software updater. When I try to run &lt;code&gt;sudo apt-get update&lt;/code&gt; from the terminal, I have a similar problem. I get the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: GPG error: http://repository.spotify.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 13B00F1FD2C19886&#xA;W: GPG error: http://security.ubuntu.com trusty-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 NO_PUBKEY 3B4FE6ACC0B21F32&#xA;W: GPG error: http://extras.ubuntu.com trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 16126D3A3E5C1192&#xA;W: GPG error: http://us.archive.ubuntu.com trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 NO_PUBKEY 3B4FE6ACC0B21F32&#xA;W: GPG error: http://us.archive.ubuntu.com trusty-updates Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 NO_PUBKEY 3B4FE6ACC0B21F32&#xA;W: GPG error: http://us.archive.ubuntu.com trusty-backports Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5 NO_PUBKEY 3B4FE6ACC0B21F32&#xA;W: GPG error: http://ppa.launchpad.net trusty Release: The following  signatures couldn't be verified because the public key is not available: NO_PUBKEY 5EC48884BB901940&#xA;W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BF36996C4E1F8A59&#xA;W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY BF36996C4E1F8A59&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does anybody know what this error means? And how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="539" LastEditorUserId="129" LastEditDate="2015-08-24T05:27:14.563" LastActivityDate="2015-08-24T05:27:14.563" Title="Can not update applications because off unauthenticated sources" Tags="|release-freya|applications|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1528" PostTypeId="2" ParentId="1525" CreationDate="2015-08-24T03:40:33.737" Score="4" Body="&lt;p&gt;Yes, I've had this problem in the past. Researching about authentication GPG keys, I found out that there is a limit to how many GPG keys it stores. As a result, some keys are not verified. On the other hand, if you're feeling adventurous at downloading apps in repositories that are not signed, this can also give you the error. Other users suggested Y-PPA Manager. This didn't do the trick. What did do the trick for me, not sure it will work for you, is installing Gconf Cleaner. It cleans GPG keys that are no longer available because if uninstalled apps, reinstalling apps or the repositories no longer give support to those GPG keys. Warning: messing around with the source list on your own can make your situation worst!&lt;/p&gt;&#xA;" OwnerUserId="848" LastActivityDate="2015-08-24T03:40:33.737" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1530" PostTypeId="1" CreationDate="2015-08-24T06:20:27.590" Score="6" ViewCount="4001" Body="&lt;p&gt;I'm looking to see if I can reduce the height of the wingpanel in elementary OS Freya. I mean make the wingpanel smaller like normal wingpanel in elementary OS Luna.&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="45" LastEditDate="2015-08-24T07:03:28.907" LastActivityDate="2018-11-11T17:44:27.197" Title="Customize (to decrease the height of the wingpanel) in Freya" Tags="|release-freya|wingpanel|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1531" PostTypeId="2" ParentId="1530" CreationDate="2015-08-24T06:56:46.790" Score="10" Body="&lt;p&gt;You can make the panel shorter by editing your system's stylesheet. If you haven't modified your system, the file you want to edit is &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt;. You can adjust the height of the panel by reducing the padding in the selector &lt;code&gt;.composited-indicator&lt;/code&gt;. The current version of the stylesheet doesn't style &lt;code&gt;.composited-indicator&lt;/code&gt; directly, so you'll have to add a line for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;.composited-indicator&lt;/code&gt; is a Gtk.MenuItem so it inherits all the style properties defined in &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&lt;/code&gt; under the selector &lt;code&gt;.menu .menuitem&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-24T06:56:46.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1532" PostTypeId="2" ParentId="1476" CreationDate="2015-08-24T07:31:40.927" Score="1" Body="&lt;p&gt;Try disabling network boot partition in your bios.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then select cd-rom from the multi-boot option of you bios(generally f12).&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-08-24T07:31:40.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1534" PostTypeId="2" ParentId="1475" CreationDate="2015-08-24T08:02:57.593" Score="-1" Body="&lt;p&gt;You can find some answers in my article on &lt;a href=&quot;https://kaneis.wordpress.com/2013/09/25/installation-of-ubuntu-dual-boot-windows-already-installed-on-sony-vaio-svs13a1s9es-13-5-laptop-with-insyde-h2o-efi-bios-the-process-that-follows-assume-that-we-have-a-x86_64-system-64bit/&quot; rel=&quot;nofollow&quot;&gt;https://kaneis.wordpress.com/2013/09/25/installation-of-ubuntu-dual-boot-windows-already-installed-on-sony-vaio-svs13a1s9es-13-5-laptop-with-insyde-h2o-efi-bios-the-process-that-follows-assume-that-we-have-a-x86_64-system-64bit/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1090" LastActivityDate="2015-08-24T08:02:57.593" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1538" PostTypeId="2" ParentId="1453" CreationDate="2015-08-24T11:36:47.687" Score="1" Body="&lt;p&gt;Elementary OS Luna is still  available here... &lt;a href=&quot;https://old.elementary.io/&quot; rel=&quot;nofollow&quot;&gt;https://old.elementary.io/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1097" LastActivityDate="2015-08-24T11:36:47.687" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1540" PostTypeId="1" CreationDate="2015-08-24T12:07:52.173" Score="3" ViewCount="1132" Body="&lt;p&gt;Is is possible to combine top panel bar and dock? My best option would be that combined bar to show on the top, always visible.&lt;/p&gt;&#xA;" OwnerUserId="1026" LastEditorDisplayName="user170" LastEditDate="2017-12-06T15:24:30.757" LastActivityDate="2017-12-06T16:54:55.293" Title="Possible to combine top panel bar and dock?" Tags="|wingpanel|plank|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1543" PostTypeId="2" ParentId="1540" CreationDate="2015-08-24T16:09:38.807" Score="1" Body="&lt;p&gt;As far I know, no. You can change the position of this dock using &lt;code&gt;elementary-tweaks&lt;/code&gt;, but if you move it on the top, it will go under the top panel which is not really convenient, because you barely can click items.&lt;/p&gt;&#xA;" OwnerUserId="972" LastActivityDate="2015-08-24T16:09:38.807" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1544" PostTypeId="1" CreationDate="2015-08-24T16:23:54.733" Score="4" ViewCount="326" Body="&lt;p&gt;I am a beginner on Linux so I don't know what went wrong but the Software Center wont open anymore, if I click it it will open and close immediately. Also, on the top bar it will appear the message on the attached picture. &lt;a href=&quot;https://i.stack.imgur.com/FXyv0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FXyv0.jpg&quot; alt=&quot;error message&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I cannot install any application, it wont let me install it from the terminal because it will says &quot;Unable to correct problems, you have held broken packages.&quot; or &quot;Type '“deb' is not known on line 59 in source list /etc/apt/sources.listE: The list of sources could not be read.&quot;&lt;/p&gt;&#xA;" OwnerUserId="1110" LastEditorUserId="1110" LastEditDate="2015-08-24T16:48:07.430" LastActivityDate="2015-08-24T23:43:50.120" Title="Can't open Software Center" Tags="|system|pantheon-terminal|apt|" AnswerCount="0" CommentCount="7" ClosedDate="2015-09-03T22:48:29.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="1545" PostTypeId="1" AcceptedAnswerId="1550" CreationDate="2015-08-24T17:16:06.113" Score="1" ViewCount="264" Body="&lt;p&gt;I've been considering running elementary OS as my primary OS instead of Windows, but I do have a couple of questions regarding virtualization (or even dual-booting).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let's put this into context, I've finished my bachelor's degree in IT and I'm proceeding for a master's degree (also IT). I'll be mainly focussing:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Office-documents (not necessarily Microsoft Office)&lt;/li&gt;&#xA;&lt;li&gt;Most likely C-programming (or C++)&lt;/li&gt;&#xA;&lt;li&gt;OpenVPN, and ownCloud in the near future.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Is it adviseable using elementary OS for this use-case and just virtualizing my Windows machine, vice versa, or stick to dual booting?&lt;br/&gt;&#xA;I've got quiet a powerful laptop, so virtualizing shouldn't be a problem:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i7&lt;/li&gt;&#xA;&lt;li&gt;8GB Ram&lt;/li&gt;&#xA;&lt;li&gt;250GB SSD&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now regarding the virtualization of machines, which program is most adviseable, I've read that Xen is quiet the powerhouse as it's a type-1 hypervisor but I'm personally more experienced using VMWare Workstation or Virtualbox (I do understand that VMWare and Virtualbox work on a different layer), but the main reason I'd use Windows is because of Visual Studio and/or Microsoft Office.&lt;br/&gt;&#xA;&lt;em&gt;Another question to avoid any confusion, do I run Xen on Elementary OS or vice versa?&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance,&lt;br&gt;&#xA;D&lt;/p&gt;&#xA;" OwnerUserId="713" LastEditorUserId="26" LastEditDate="2016-09-25T17:08:47.010" LastActivityDate="2016-09-25T17:08:47.010" Title="elementary OS as Xen host?" Tags="|dual-boot|microsoft-windows|virtualization|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1546" PostTypeId="1" CreationDate="2015-08-24T17:34:57.617" Score="1" ViewCount="442" Body="&lt;p&gt;The power menu in the right upper corner lacks restart. If I press physical power button i get a menu containing the restart. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also the suspend in the right upper corner seems to work differently than when it's selected after pressing the actual power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mbr Patte&lt;/p&gt;&#xA;" OwnerUserId="929" LastActivityDate="2015-08-24T22:41:49.973" Title="Power menu lacks restart command" Tags="|release-freya|power|suspend|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1547" PostTypeId="1" AcceptedAnswerId="1549" CreationDate="2015-08-24T19:38:58.260" Score="5" ViewCount="249" Body="&lt;p&gt;Upon opening 'Files' from the slingshot application manager, you are greeted with the directory of which 'Files' was at when it was last closed. For example, if I were to open 'Files' and go to 'Documents' and then close this window, when I open 'Files' again, it'll open into the 'Documents' directory by default. Is there any way to change this so that it opens instead to the 'Home' directory (pictured) regardless of it's last closed state, instead of opening into one of the sub-folders such as 'Pictures' 'Documents' etc?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Robbie&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q3e0p.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q3e0p.png&quot; alt=&quot;Home Directory&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="663" LastEditorUserId="26" LastEditDate="2015-09-03T10:28:05.357" LastActivityDate="2015-09-03T10:28:05.357" Title="Opening the 'Files' application (Pantheon Files) displays the screen at the state of which it was closed. Is there a way to change this?" Tags="|pantheon-files|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1548" PostTypeId="1" CreationDate="2015-08-24T20:04:02.247" Score="3" ViewCount="1783" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YejyS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YejyS.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whenever I try to reboot, elementary OS just freezes and my screen stays like this; I tried both &lt;code&gt;sudo shutdown -r now&lt;/code&gt; and clicking the menu button, but it keeps resulting in a freeze. Does anyone know how to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="1112" LastEditorUserId="383" LastEditDate="2015-08-25T20:25:33.050" LastActivityDate="2017-06-13T16:34:40.780" Title="elementary OS freezes when trying to reboot / shutdown?" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1549" PostTypeId="2" ParentId="1547" CreationDate="2015-08-24T20:21:32.760" Score="8" Body="&lt;p&gt;In dconf editor open&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org -&amp;gt; pantheon -&amp;gt; files -&amp;gt; preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and uncheck the box &quot;restore tabs&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will open your home directory every time you open pantheon files.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2015-08-24T20:21:32.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1550" PostTypeId="2" ParentId="1545" CreationDate="2015-08-24T21:11:34.833" Score="1" Body="&lt;p&gt;I've been running a similar setup for a couple of years. I have elementary OS as my primary OS. Windows 7 as a virtual machine using VMware Workstation. I also have VirtualBox installed for use with vagrant environments. I'm running this on a i5 with 8GB and non-SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the Windows VM, I have it set to use 2GB of RAM. I use it mainly for Office and Visual Studio. There haven't really been any performance issues using it this way, but it depends on the size and complexity of the projects you are compiling in VS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as hypervisors go, I haven't looked at Xen in a while, but from what I remember it was a bare-metal hypervisor that is basically KVM at the core. If that is still the case, you are left with VMware Workstation or VirtualBox. I like both, but for me VMware seems to perform a little better plus I can use it to access my ESX clusters. Either one should work well though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For my workflow, I usually use two workspaces with a web browser and terminal in one, and VMware Workstation in another. The only issue that occasionally bothers me is when I attempt to use elementary shortcuts while in the Windows VM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Overall, I really like the workflow. Try it for a week or two and switch back if you don't like it.&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-08-24T21:11:34.833" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1551" PostTypeId="2" ParentId="1546" CreationDate="2015-08-24T22:06:57.583" Score="3" Body="&lt;p&gt;If you click on the menu entry called &lt;em&gt;Shutdown...&lt;/em&gt; it does not turn off the system immediately but instead opens a dialog, where you can also click on &lt;em&gt;Restart&lt;/em&gt; (pictured in the middle).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can just type &quot;Restart&quot; into Slingshot or use the terminal command &lt;code&gt;sudo shutdown -r now&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ipgbC.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ipgbC.jpg&quot; alt=&quot;Options to Restart and Shutdown&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-08-24T22:41:49.973" LastActivityDate="2015-08-24T22:41:49.973" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1553" PostTypeId="1" AcceptedAnswerId="1557" CreationDate="2015-08-25T02:07:32.097" Score="5" ViewCount="1322" Body="&lt;p&gt;I would like to install a more recent kernel, as of now I have linux-image-3.16, and I would like to upgrade to 3.19 to achieve better compatibility (here's to hoping my GPU/motherboard fans will work as expected). However, when instaling linux-headers and linux-image 3.19, after rebooting I get a blank screen at the end of the boot sequence, when I was supposed to reach the login screen. The system completely hangs, and I can't reach the text consoles.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this doable? I'd love to be able to keep a more recent kernel, without having to ditch Freya because my fans don't work. On Luna this was almost effortless and had no issues doing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Further info:&#xA;Freya running on Lenovo y510p, Core i7, 16GB RAM, SSD and Nvidia SLI with Nvidia privative driver.&lt;/p&gt;&#xA;" OwnerUserId="370" LastActivityDate="2015-08-25T05:55:53.703" Title="Is it possible to install a more up-to-date kernel in Freya?" Tags="|release-freya|kernel|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1554" PostTypeId="1" CreationDate="2015-08-25T02:18:45.517" Score="3" ViewCount="1270" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Qzy5T.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qzy5T.png&quot; alt=&quot;the result of gnome-control-center keyboard &quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm trying to open the keyboard settings from the System Settings app, and the app just closes down. Every other item opens just fine.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;elementary os 0.3 freya&lt;/p&gt;&#xA;&lt;p&gt;Linux 3.16.0-38-generic x86_64&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Please let me know what other info I can provide. I don't know what details will be helpful in troubleshooting.&lt;/p&gt;&#xA;" OwnerUserId="960" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-09-18T03:09:00.363" Title="When I try to access the keyboard settings, the app just closes. How do I access the keyboard settings?" Tags="|settings|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1555" PostTypeId="1" AcceptedAnswerId="1558" CreationDate="2015-08-25T05:03:51.327" Score="2" ViewCount="168" Body="&lt;p&gt;The Installation Guide says:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;64-bit&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Running the following command in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;shasum -a 256 -c elementaryos-freya-amd64.20150411.iso&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;should produce the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;a7b8edfe95eb1c12745e02c63f830cad06ee756f552cba1cdca7bc30b7ca39e7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I run the command and get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./.disk/base_installable: FAILED open or read&#xA;./.disk/casper-uuid-3.16.0-34-generic: FAILED open or read&#xA;./.disk/casper-uuid-generic: FAILED open or read&#xA;./.disk/cd_type: FAILED open or read&#xA;./.disk/info: FAILED open or read&#xA;./.disk/release_notes_url: FAILED open or read&#xA;./EFI/BOOT/BOOTx64.EFI: FAILED open or read&#xA;./EFI/BOOT/grubx64.efi: FAILED open or read&#xA;./README.diskdefines: FAILED open or read&#xA;./boot/grub/efi.img: FAILED open or read&#xA;./boot/grub/font.pf2: FAILED open or read&#xA;./boot/grub/grub.cfg: FAILED open or read&#xA;./boot/grub/loopback.cfg: FAILED open or read&#xA;./boot/grub/x86_64-efi/acpi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/adler32.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ahci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/all_video.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/aout.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/appleldr.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/archelp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/at_keyboard.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ata.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/backtrace.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/bfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/bitmap.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/bitmap_scale.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/blocklist.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/boot.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/bsd.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/btrfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/bufio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cat.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cbfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cbls.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cbmemc.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cbtable.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cbtime.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/chain.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cmdline_cat_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cmp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/command.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/cpio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cpio_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cpuid.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/crc64.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/crypto.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/crypto.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cryptodisk.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/cs5536.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/date.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/datehook.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/datetime.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/disk.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/diskfilter.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/div_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/dm_nv.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/echo.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/efi_gop.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/efi_uga.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/efifwsetup.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/efinet.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ehci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/elf.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/eval.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/exfat.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/exfctest.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ext2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/fat.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/file.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/fixvideo.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/font.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/fs.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_arcfour.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_blowfish.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_camellia.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_cast5.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_crc.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_des.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_dsa.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_idea.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_md4.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_md5.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_rfc2268.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_rijndael.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_rmd160.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_rsa.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_seed.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_serpent.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_sha1.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_sha256.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_sha512.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_tiger.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_twofish.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gcry_whirlpool.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/geli.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gettext.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gfxmenu.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gfxterm.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gfxterm_background.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gfxterm_menu.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/gptsync.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/grub.cfg: FAILED open or read&#xA;./boot/grub/x86_64-efi/gzio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/halt.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hashsum.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hdparm.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/help.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hexdump.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hfsplus.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/hfspluscomp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/http.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/iorw.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/jfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/jpeg.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/keylayouts.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/keystatus.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ldm.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/legacy_password_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/legacycfg.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/linux.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/linux16.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/linuxefi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/loadbios.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/loadenv.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/loopback.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ls.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lsacpi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lsefi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lsefimmap.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lsefisystab.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lsmmap.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lspci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lssal.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/luks.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lvm.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/lzopio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/macbless.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/macho.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/mdraid09.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/mdraid09_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/mdraid1x.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/memrw.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minicmd.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minix2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minix2_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minix3.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minix3_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/minix_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/mmap.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/moddep.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/morse.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/mpi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/msdospart.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/multiboot.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/multiboot2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/nativedisk.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/net.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/newc.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ntfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ntfscomp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/odc.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/offsetio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ohci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_acorn.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_amiga.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_apple.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_bsd.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_dfly.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_dvh.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_gpt.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_msdos.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_plan.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_sun.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/part_sunpc.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/partmap.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/parttool.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/parttool.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/password.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/password_pbkdf2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/pata.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/pbkdf2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/pbkdf2_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/pcidump.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/play.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/png.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/priority_queue.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/probe.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/procfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/progress.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/raid5rec.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/raid6rec.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/read.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/reboot.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/regexp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/reiserfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/relocator.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/romfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/scsi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/serial.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/setjmp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/setjmp_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/setpci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/signature_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/sleep.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/sleep_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/spkmodem.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/squash4.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/syslinuxcfg.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/terminal.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/terminal.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/terminfo.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/test_blockarg.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/testload.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/testspeed.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/tftp.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/tga.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/time.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/tr.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/trig.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/true.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/udf.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ufs1.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ufs1_be.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/ufs2.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/uhci.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usb.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usb_keyboard.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbms.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbserial_common.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbserial_ftdi.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbserial_pl2303.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbserial_usbdebug.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/usbtest.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/verify.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/video.lst: FAILED open or read&#xA;./boot/grub/x86_64-efi/video.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/video_bochs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/video_cirrus.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/video_colors.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/video_fb.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/videoinfo.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/videotest.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/videotest_checksum.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/xfs.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/xnu.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/xnu_uuid.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/xnu_uuid_test.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/xzio.mod: FAILED open or read&#xA;./boot/grub/x86_64-efi/zfscrypt.mod: FAILED open or read&#xA;./casper/filesystem.manifest: FAILED open or read&#xA;./casper/filesystem.manifest-remove: FAILED open or read&#xA;./casper/filesystem.size: FAILED open or read&#xA;./casper/filesystem.squashfs: FAILED open or read&#xA;./casper/initrd.lz: FAILED open or read&#xA;./casper/memtest: FAILED open or read&#xA;./casper/vmlinuz: FAILED open or read&#xA;./dists/trusty/Release: FAILED open or read&#xA;./dists/trusty/Release.gpg: FAILED open or read&#xA;./dists/trusty/main/binary-amd64/Packages.gz: FAILED open or read&#xA;./dists/trusty/main/binary-amd64/Release: FAILED open or read&#xA;./dists/trusty/main/binary-i386/Packages.gz: FAILED open or read&#xA;./dists/trusty/main/binary-i386/Release: FAILED open or read&#xA;./dists/trusty/restricted/binary-amd64/Packages.gz: FAILED open or read&#xA;./dists/trusty/restricted/binary-amd64/Release: FAILED open or read&#xA;./dists/trusty/restricted/binary-i386/Packages.gz: FAILED open or read&#xA;./dists/trusty/restricted/binary-i386/Release: FAILED open or read&#xA;./install/mt86plus: FAILED open or read&#xA;./isolinux/16x16.fnt: FAILED open or read&#xA;./isolinux/access.pcx: FAILED open or read&#xA;./isolinux/adtxt.cfg: FAILED open or read&#xA;./isolinux/am.tr: FAILED open or read&#xA;./isolinux/ast.tr: FAILED open or read&#xA;./isolinux/back.jpg: FAILED open or read&#xA;./isolinux/be.tr: FAILED open or read&#xA;./isolinux/bg.tr: FAILED open or read&#xA;./isolinux/blank.pcx: FAILED open or read&#xA;./isolinux/bootlogo: FAILED open or read&#xA;./isolinux/bs.tr: FAILED open or read&#xA;./isolinux/ca.tr: FAILED open or read&#xA;./isolinux/chain.c32: FAILED open or read&#xA;./isolinux/cs.tr: FAILED open or read&#xA;./isolinux/da.tr: FAILED open or read&#xA;./isolinux/de.tr: FAILED open or read&#xA;./isolinux/el.tr: FAILED open or read&#xA;./isolinux/en.tr: FAILED open or read&#xA;./isolinux/eo.tr: FAILED open or read&#xA;./isolinux/es.tr: FAILED open or read&#xA;./isolinux/et.tr: FAILED open or read&#xA;./isolinux/eu.tr: FAILED open or read&#xA;./isolinux/exithelp.cfg: FAILED open or read&#xA;./isolinux/fa.tr: FAILED open or read&#xA;./isolinux/fi.tr: FAILED open or read&#xA;./isolinux/fr.tr: FAILED open or read&#xA;./isolinux/ga.tr: FAILED open or read&#xA;./isolinux/gfxboot.c32: FAILED open or read&#xA;./isolinux/gfxboot.cfg: FAILED open or read&#xA;./isolinux/gl.tr: FAILED open or read&#xA;./isolinux/he.tr: FAILED open or read&#xA;./isolinux/hr.tr: FAILED open or read&#xA;./isolinux/hu.tr: FAILED open or read&#xA;./isolinux/id.tr: FAILED open or read&#xA;./isolinux/is.tr: FAILED open or read&#xA;./isolinux/isolinux.cfg: FAILED open or read&#xA;./isolinux/it.tr: FAILED open or read&#xA;./isolinux/ja.tr: FAILED open or read&#xA;./isolinux/ka.tr: FAILED open or read&#xA;./isolinux/kk.tr: FAILED open or read&#xA;./isolinux/kn.tr: FAILED open or read&#xA;./isolinux/ko.tr: FAILED open or read&#xA;./isolinux/ku.tr: FAILED open or read&#xA;./isolinux/langlist: FAILED open or read&#xA;./isolinux/lo.tr: FAILED open or read&#xA;./isolinux/lt.tr: FAILED open or read&#xA;./isolinux/lv.tr: FAILED open or read&#xA;./isolinux/menu.cfg: FAILED open or read&#xA;./isolinux/mk.tr: FAILED open or read&#xA;./isolinux/mr.tr: FAILED open or read&#xA;./isolinux/nb.tr: FAILED open or read&#xA;./isolinux/nl.tr: FAILED open or read&#xA;./isolinux/nn.tr: FAILED open or read&#xA;./isolinux/pl.tr: FAILED open or read&#xA;./isolinux/prompt.cfg: FAILED open or read&#xA;./isolinux/pt.tr: FAILED open or read&#xA;./isolinux/pt_BR.tr: FAILED open or read&#xA;./isolinux/ro.tr: FAILED open or read&#xA;./isolinux/ru.tr: FAILED open or read&#xA;./isolinux/si.tr: FAILED open or read&#xA;./isolinux/sk.tr: FAILED open or read&#xA;./isolinux/sl.tr: FAILED open or read&#xA;./isolinux/splash.pcx: FAILED open or read&#xA;./isolinux/splash.png: FAILED open or read&#xA;./isolinux/sq.tr: FAILED open or read&#xA;./isolinux/sr.tr: FAILED open or read&#xA;./isolinux/stdmenu.cfg: FAILED open or read&#xA;./isolinux/sv.tr: FAILED open or read&#xA;./isolinux/te.tr: FAILED open or read&#xA;./isolinux/tl.tr: FAILED open or read&#xA;./isolinux/tr.tr: FAILED open or read&#xA;./isolinux/txt.cfg: FAILED open or read&#xA;./isolinux/uk.tr: FAILED open or read&#xA;./isolinux/vesamenu.c32: FAILED open or read&#xA;./isolinux/vi.tr: FAILED open or read&#xA;./isolinux/zh_CN.tr: FAILED open or read&#xA;./isolinux/zh_TW.tr: FAILED open or read&#xA;./pics/blue-lowerleft.png: FAILED open or read&#xA;./pics/blue-lowerright.png: FAILED open or read&#xA;./pics/blue-upperleft.png: FAILED open or read&#xA;./pics/blue-upperright.png: FAILED open or read&#xA;./pics/debian.jpg: FAILED open or read&#xA;./pics/logo-50.jpg: FAILED open or read&#xA;./pics/red-lowerleft.png: FAILED open or read&#xA;./pics/red-lowerright.png: FAILED open or read&#xA;./pics/red-upperleft.png: FAILED open or read&#xA;./pics/red-upperright.png: FAILED open or read&#xA;./pool/main/b/b43-fwcutter/b43-fwcutter_018-2_amd64.deb: FAILED open or read&#xA;./pool/main/d/dkms/dkms_2.2.0.3-1.1ubuntu5.14.04_all.deb: FAILED open or read&#xA;./pool/main/e/efibootmgr/efibootmgr_0.5.4-7ubuntu1_amd64.deb: FAILED open or read&#xA;./pool/main/f/fakeroot/fakeroot_1.20-3ubuntu2_amd64.deb: FAILED open or read&#xA;./pool/main/f/fakeroot/libfakeroot_1.20-3ubuntu2_amd64.deb: FAILED open or read&#xA;./pool/main/g/grub2-signed/grub-efi-amd64-signed_1.34.1+2.02~beta2-9ubuntu1_amd64.deb: FAILED open or read&#xA;./pool/main/g/grub2/grub-efi-amd64-bin_2.02~beta2-9ubuntu1_amd64.deb: FAILED open or read&#xA;./pool/main/g/grub2/grub-efi-amd64_2.02~beta2-9ubuntu1_amd64.deb: FAILED open or read&#xA;./pool/main/g/grub2/grub-efi_2.02~beta2-9ubuntu1_amd64.deb: FAILED open or read&#xA;./pool/main/l/lupin/lupin-support_0.55_amd64.deb: FAILED open or read&#xA;./pool/main/m/mouseemu/mouseemu_0.16-0ubuntu9_amd64.deb: FAILED open or read&#xA;./pool/main/s/secureboot-db/secureboot-db_1.1_amd64.deb: FAILED open or read&#xA;./pool/main/s/setserial/setserial_2.17-48_amd64.deb: FAILED open or read&#xA;./pool/main/s/shim-signed/shim-signed_1.6+0.4-0ubuntu4_amd64.deb: FAILED open or read&#xA;./pool/main/s/shim/shim_0.4-0ubuntu4_amd64.deb: FAILED open or read&#xA;./pool/main/u/ubiquity-slideshow-ubuntu/oem-config-slideshow-ubuntu_83.1_all.deb: FAILED open or read&#xA;./pool/main/u/ubiquity/oem-config-gtk_2.18.8.6_all.deb: FAILED open or read&#xA;./pool/main/u/ubiquity/oem-config_2.18.8.6_all.deb: FAILED open or read&#xA;./pool/main/u/user-setup/user-setup_1.48ubuntu2_all.deb: FAILED open or read&#xA;./pool/main/w/wvdial/wvdial_1.61-4.1_amd64.deb: FAILED open or read&#xA;./pool/main/w/wvstreams/libuniconf4.6_4.6.1-7_amd64.deb: FAILED open or read&#xA;./pool/main/w/wvstreams/libwvstreams4.6-base_4.6.1-7_amd64.deb: FAILED open or read&#xA;./pool/main/w/wvstreams/libwvstreams4.6-extras_4.6.1-7_amd64.deb: FAILED open or read&#xA;./pool/restricted/b/bcmwl/bcmwl-kernel-source_6.30.223.141+bdcom-0ubuntu2_amd64.deb: FAILED open or read&#xA;    101 restricted/binary-i386/Release: FAILED open or read&#xA;     20 restricted/binary-i386/Packages.gz: FAILED open or read&#xA;      0 restricted/binary-i386/Packages: FAILED open or read&#xA;    102 restricted/binary-amd64/Release: FAILED open or read&#xA;    749 restricted/binary-amd64/Packages.gz: FAILED open or read&#xA;   1199 restricted/binary-amd64/Packages: FAILED open or read&#xA;     95 main/binary-i386/Release: FAILED open or read&#xA;     20 main/binary-i386/Packages.gz: FAILED open or read&#xA;      0 main/binary-i386/Packages: FAILED open or read&#xA;     96 main/binary-amd64/Release: FAILED open or read&#xA;  10320 main/binary-amd64/Packages.gz: FAILED open or read&#xA;  29960 main/binary-amd64/Packages: FAILED open or read&#xA;    101 restricted/binary-i386/Release: FAILED open or read&#xA;     20 restricted/binary-i386/Packages.gz: FAILED open or read&#xA;      0 restricted/binary-i386/Packages: FAILED open or read&#xA;    102 restricted/binary-amd64/Release: FAILED open or read&#xA;    749 restricted/binary-amd64/Packages.gz: FAILED open or read&#xA;   1199 restricted/binary-amd64/Packages: FAILED open or read&#xA;     95 main/binary-i386/Release: FAILED open or read&#xA;     20 main/binary-i386/Packages.gz: FAILED open or read&#xA;      0 main/binary-i386/Packages: FAILED open or read&#xA;     96 main/binary-amd64/Release: FAILED open or read&#xA;  10320 main/binary-amd64/Packages.gz: FAILED open or read&#xA;  29960 main/binary-amd64/Packages: FAILED open or read&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1115" LastEditorUserId="84" LastEditDate="2015-08-25T17:26:28.873" LastActivityDate="2015-08-25T17:26:28.873" Title="Shasum check gives long list of errors" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1557" PostTypeId="2" ParentId="1553" CreationDate="2015-08-25T05:50:25.843" Score="8" Body="&lt;p&gt;&lt;strong&gt;System Recovery&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are now unable to boot, press (or tap) &lt;kbd&gt;Shift&lt;/kbd&gt; while booting (right after BIOS post screen) to show the GRUB menu. You can choose an older kernel to boot into from the recovery options menu item. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install 3.19 Kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install linux-generic-lts-vivid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The above command will install the &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;backported&lt;/a&gt; 3.19 kernel from the LTS Enablement Stack. You may have more luck with that one. It installed flawlessly for me in any case. See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/82/137&quot;&gt;this&lt;/a&gt; answer for instructions for installing other kernel versions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Troubleshooting&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you could boot to a recovery mode console (from GRUB) and examine your &lt;a href=&quot;https://help.ubuntu.com/community/LinuxLogFiles&quot; rel=&quot;nofollow noreferrer&quot;&gt;logs&lt;/a&gt; for clues as to why it is stalling on boot. Especially the following...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;less /var/log/kern.log&lt;/code&gt; (Shows Kernel messages)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;less /var/log/Xorg.0.log&lt;/code&gt; (X server logs)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;less /var/log/syslog&lt;/code&gt; (Overarching system log)&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-25T05:55:53.703" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1558" PostTypeId="2" ParentId="1555" CreationDate="2015-08-25T06:23:35.250" Score="5" Body="&lt;p&gt;Try &lt;code&gt;shasum -a 256 elementaryos-freya-amd64.20150411.iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;-c&lt;/code&gt; flag shouldn't be in there.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-25T06:23:35.250" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1559" PostTypeId="2" ParentId="1554" CreationDate="2015-08-25T08:33:28.337" Score="2" Body="&lt;p&gt;Have you installed elementary-tweaks per chance? (I see &lt;code&gt;Tweaks.vala&lt;/code&gt; in your terminal output) Unfortunately while a great application, it is reported to cause issues and is &lt;a href=&quot;https://elementaryos.meta.stackexchange.com/questions/37/elementarys-stance-on-elementary-tweaks&quot;&gt;not recommend&lt;/a&gt;. This might be one of those issues? Try uninstalling it and see if the problem persists. If that fixes it I'd suggest posting a bug to the elementary-tweaks &lt;a href=&quot;https://bugs.launchpad.net/~mpstark&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug tracker&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just for clarification, &lt;code&gt;gnome-control-center&lt;/code&gt; is a bash script that redirects to &lt;code&gt;switchboard&lt;/code&gt;, which is the actual name of the &lt;em&gt;System Settings&lt;/em&gt; app in elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon further inspection of your terminal output, it shows a segfault on line 20, which is where the redirection takes place. The actual command to open the keyboard settings dialog is &lt;code&gt;switchboard keyboard&lt;/code&gt;. Run that command directly and see if it gives any additional clues. If there is nothing obvious there, run it with the -d flag to show additional debug information. &lt;code&gt;switchboard -d keyboard&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try to reinstall switchboard and the keyboard plugin with-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install --reinstall switchboard switchboard-plug-keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If a reinstall doesn't help, it is time to hit the &lt;em&gt;switchboard-plug-keyboard&lt;/em&gt; bug tracker. See &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;this answer&lt;/a&gt; for best practices in lodging bug reports. I notice there are &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-keyboard?field.searchtext=crash&amp;amp;search=Search&amp;amp;field.status%3Alist=NEW&amp;amp;field.status%3Alist=INCOMPLETE_WITH_RESPONSE&amp;amp;field.status%3Alist=INCOMPLETE_WITHOUT_RESPONSE&amp;amp;field.status%3Alist=CONFIRMED&amp;amp;field.status%3Alist=TRIAGED&amp;amp;field.status%3Alist=INPROGRESS&amp;amp;field.status%3Alist=FIXCOMMITTED&amp;amp;field.assignee=&amp;amp;field.bug_reporter=&amp;amp;field.omit_dupes=on&amp;amp;field.has_patch=&amp;amp;field.has_no_package=&quot; rel=&quot;nofollow noreferrer&quot;&gt;several&lt;/a&gt; existing bugs related to crashing on there already that may be possible duplicates of yours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please update your question with the &lt;code&gt;-d&lt;/code&gt; output and a link to the bug report. Also consider including a link to this question in your bug report in case someone else comes along and solves your problem here.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-26T02:41:31.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1560" PostTypeId="2" ParentId="1240" CreationDate="2015-08-25T10:20:37.190" Score="1" Body="&lt;p&gt;You should go through this bug report.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1074721&quot; rel=&quot;nofollow noreferrer&quot;&gt;qtgtk style cannot detect elementary gtk style&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are fixes mentioned in this report. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first being(for x86_64):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gconftool-2 --set --type string /desktop/gnome/interface/gtk_theme Elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And for 32bit applications on x86_64:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install ia32-libs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/questions/107230/what-happened-to-the-ia32-libs-package&quot;&gt;this post&lt;/a&gt; ia32-libs is no longer included in the os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Ubuntu 11.10 &lt;a href=&quot;https://wiki.ubuntu.com/MultiarchSpec&quot; rel=&quot;nofollow noreferrer&quot;&gt;Multiarch&lt;/a&gt; has been added.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, to explicitly install &lt;code&gt;ia32-libs&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i&#xA;cd /etc/apt/sources.list.d&#xA;echo &quot;deb http://old-releases.ubuntu.com/ubuntu/ raring main restricted universe multiverse&quot; &amp;gt;ia32-libs-raring.list&#xA;apt-get update&#xA;apt-get install ia32-libs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://stackoverflow.com/questions/23182765/how-to-install-ia32-libs-in-ubuntu-14-04-lts-trusty-tahr&quot;&gt;this&lt;/a&gt; you can also try installing 32bit library of the application: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install program:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="390" LastEditorUserId="5054" LastEditDate="2017-06-15T13:50:49.330" LastActivityDate="2017-06-15T13:50:49.330" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1561" PostTypeId="1" CreationDate="2015-08-25T13:46:41.943" Score="6" ViewCount="236" Body="&lt;p&gt;When launching GIMP, I receive the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Bus error (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before it was also included:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it seems to have been resolved after installing the &lt;code&gt;libcanberra-gtk-module:i386&lt;/code&gt; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any assistance will be greatly appreciated as I use GIMP regularly.&lt;/p&gt;&#xA;" OwnerUserId="1120" LastEditorUserId="1239" LastEditDate="2016-01-02T00:18:05.687" LastActivityDate="2016-04-26T02:45:17.213" Title="GIMP crashes on launch" Tags="|gtk|gimp|crash|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1562" PostTypeId="2" ParentId="1561" CreationDate="2015-08-25T14:33:50.240" Score="7" Body="&lt;p&gt;Resolved problem by removing &lt;code&gt;.gimp-2.8&lt;/code&gt; folder in home&lt;/p&gt;&#xA;" OwnerUserId="1120" LastEditorUserId="3757" LastEditDate="2016-04-26T02:45:17.213" LastActivityDate="2016-04-26T02:45:17.213" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1563" PostTypeId="1" AcceptedAnswerId="1607" CreationDate="2015-08-25T18:58:16.983" Score="6" ViewCount="618" Body="&lt;p&gt;I have a netbook with small performance (&lt;em&gt;AMD C-70 APU with Radeon(tm) HD Graphics x 2&lt;/em&gt;) with 1.7 GiB of memory. Elementary Luna is already quite slow. If I update to Freya, shall I expect lower or higher performance?&lt;/p&gt;&#xA;" OwnerUserId="207" LastActivityDate="2016-09-30T07:23:24.773" Title="Freya vs Luna performance requirement" Tags="|release-freya|luna|performance|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1564" PostTypeId="5" CreationDate="2015-08-25T18:59:25.683" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-08-25T18:59:25.683" LastActivityDate="2015-08-25T18:59:25.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1565" PostTypeId="4" CreationDate="2015-08-25T18:59:25.683" Score="0" Body="For all questions relative to application or system performance issue." OwnerUserId="207" LastEditorUserId="207" LastEditDate="2015-08-26T17:46:29.800" LastActivityDate="2015-08-26T17:46:29.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1566" PostTypeId="1" CreationDate="2015-08-25T19:21:59.243" Score="4" ViewCount="667" Body="&lt;p&gt;Minimal BASH-like line editing at startup. I used a live key of elementary Luna to install and execute boot-repair and got the following result:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://paste2.org/wVCzAxOC&quot; rel=&quot;nofollow&quot;&gt;http://paste2.org/wVCzAxOC&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Despite the operation I still have the Minimal BASH-like line editing at startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;" OwnerUserId="207" LastActivityDate="2015-08-26T10:30:56.010" Title="Minimal BASH-like line editing at startup" Tags="|boot|luna|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1568" PostTypeId="1" AcceptedAnswerId="1583" CreationDate="2015-08-25T23:08:12.860" Score="0" ViewCount="3777" Body="&lt;p&gt;On Freya, in a virtual machine &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; does not anything. I wanted to free up some disk space and it has no packages to remove, but there should be packages like old kernels, etc.&lt;/p&gt;&#xA;" OwnerUserId="1121" LastEditorUserId="68" LastEditDate="2015-08-26T18:38:31.490" LastActivityDate="2015-08-27T20:18:49.123" Title="sudo apt-get autoremove does not work" Tags="|release-freya|apt|virtualbox|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1570" PostTypeId="1" CreationDate="2015-08-26T02:06:07.817" Score="2" ViewCount="3163" Body="&lt;p&gt;I'm trying to install elementary tweaks and ran into a problem in my Terminal. I input the following lines in my terminal...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:versable/elementary-update&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I use that last one for &lt;em&gt;update&lt;/em&gt; I get the following message at the end of my terminal...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Full terminal output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ign http://security.ubuntu.com trusty-security InRelease                       &#xA;Ign http://us.archive.ubuntu.com trusty InRelease                              &#xA;Ign http://ppa.launchpad.net trusty InRelease &#xA;Hit http://security.ubuntu.com trusty-security Release.gpg&#xA;Ign http://us.archive.ubuntu.com trusty-updates InRelease&#xA;Hit http://security.ubuntu.com trusty-security Release&#xA;Ign http://us.archive.ubuntu.com trusty-backports InRelease           &#xA;Ign http://ppa.launchpad.net trusty InRelease  &#xA;Hit http://security.ubuntu.com trusty-security/main Sources&#xA;Hit http://us.archive.ubuntu.com trusty Release.gpg                            &#xA;Hit http://security.ubuntu.com trusty-security/restricted Sources     &#xA;Hit http://us.archive.ubuntu.com trusty-updates Release.gpg                    &#xA;Ign http://ppa.launchpad.net trusty InRelease                         &#xA;Hit http://security.ubuntu.com trusty-security/universe Sources&#xA;Hit http://us.archive.ubuntu.com trusty-backports Release.gpg                  &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Sources     &#xA;Hit http://us.archive.ubuntu.com trusty Release                                &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/main amd64 Packages    &#xA;Hit http://us.archive.ubuntu.com trusty-updates Release                        &#xA;Hit http://security.ubuntu.com trusty-security/restricted amd64 Packages       &#xA;Hit http://us.archive.ubuntu.com trusty-backports Release                      &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/universe amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty/main Sources                           &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://us.archive.ubuntu.com trusty/restricted Sources            &#xA;Hit http://us.archive.ubuntu.com trusty/universe Sources                       &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                       &#xA;Hit http://us.archive.ubuntu.com trusty/multiverse Sources                     &#xA;Hit http://security.ubuntu.com trusty-security/multiverse amd64 Packages       &#xA;Hit http://us.archive.ubuntu.com trusty/main amd64 Packages       &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                   &#xA;Hit http://security.ubuntu.com trusty-security/main i386 Packages &#xA;Hit http://us.archive.ubuntu.com trusty/restricted amd64 Packages &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://security.ubuntu.com trusty-security/restricted i386 Packages        &#xA;Hit http://us.archive.ubuntu.com trusty/universe amd64 Packages     &#xA;Hit http://security.ubuntu.com trusty-security/universe i386 Packages          &#xA;Hit http://us.archive.ubuntu.com trusty/multiverse amd64 Packages              &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://security.ubuntu.com trusty-security/multiverse i386 Packages        &#xA;Hit http://us.archive.ubuntu.com trusty/main i386 Packages         &#xA;Hit http://security.ubuntu.com trusty-security/main Translation-en &#xA;Hit http://us.archive.ubuntu.com trusty/restricted i386 Packages   &#xA;Ign http://ppa.launchpad.net trusty Release.gpg                    &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Translation-en&#xA;Hit http://security.ubuntu.com trusty-security/restricted Translation-en       &#xA;Hit http://us.archive.ubuntu.com trusty/universe i386 Packages                 &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://us.archive.ubuntu.com trusty/multiverse i386 Packages               &#xA;Hit http://security.ubuntu.com trusty-security/universe Translation-en         &#xA;Hit http://ppa.launchpad.net trusty Release                        &#xA;Hit http://us.archive.ubuntu.com trusty/main Translation-en                    &#xA;Hit http://ppa.launchpad.net trusty Release                               &#xA;Hit http://us.archive.ubuntu.com trusty/multiverse Translation-en              &#xA;Hit http://ppa.launchpad.net trusty Release                             &#xA;Hit http://us.archive.ubuntu.com trusty/restricted Translation-en      &#xA;Hit http://ppa.launchpad.net trusty Release                              &#xA;Hit http://us.archive.ubuntu.com trusty/universe Translation-en        &#xA;Ign http://ppa.launchpad.net trusty Release                              &#xA;Hit http://us.archive.ubuntu.com trusty-updates/main Sources             &#xA;Hit http://us.archive.ubuntu.com trusty-updates/restricted Sources&#xA;Hit http://ppa.launchpad.net trusty Release                        &#xA;Hit http://us.archive.ubuntu.com trusty-updates/universe Sources       &#xA;Hit http://us.archive.ubuntu.com trusty-updates/multiverse Sources&#xA;Hit http://ppa.launchpad.net trusty/main Sources                  &#xA;Hit http://us.archive.ubuntu.com trusty-updates/main amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-updates/restricted amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-updates/universe amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-updates/multiverse amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-updates/main i386 Packages &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages             &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages              &#xA;Hit http://us.archive.ubuntu.com trusty-updates/restricted i386 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-updates/universe i386 Packages&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en             &#xA;Hit http://us.archive.ubuntu.com trusty-updates/multiverse i386 Packages &#xA;Hit http://us.archive.ubuntu.com trusty-updates/main Translation-en&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                   &#xA;Hit http://us.archive.ubuntu.com trusty-updates/multiverse Translation-en&#xA;Hit http://us.archive.ubuntu.com trusty-updates/restricted Translation-en&#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                   &#xA;Hit http://us.archive.ubuntu.com trusty-updates/universe Translation-en&#xA;Hit http://us.archive.ubuntu.com trusty-backports/main Sources          &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en           &#xA;Hit http://us.archive.ubuntu.com trusty-backports/restricted Sources     &#xA;Hit http://us.archive.ubuntu.com trusty-backports/universe Sources&#xA;Hit http://ppa.launchpad.net trusty/main Sources                 &#xA;Hit http://us.archive.ubuntu.com trusty-backports/multiverse Sources&#xA;Hit http://us.archive.ubuntu.com trusty-backports/main amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages            &#xA;Hit http://us.archive.ubuntu.com trusty-backports/restricted amd64 Packages&#xA;Hit http://us.archive.ubuntu.com trusty-backports/universe amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://us.archive.ubuntu.com trusty-backports/multiverse amd64 Packages    &#xA;Hit http://us.archive.ubuntu.com trusty-backports/main i386 Packages           &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://us.archive.ubuntu.com trusty-backports/restricted i386 Packages     &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://us.archive.ubuntu.com trusty-backports/universe i386 Packages       &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://us.archive.ubuntu.com trusty-backports/multiverse i386 Packages     &#xA;Hit http://us.archive.ubuntu.com trusty-backports/main Translation-en          &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://us.archive.ubuntu.com trusty-backports/multiverse Translation-en    &#xA;Hit http://us.archive.ubuntu.com trusty-backports/restricted Translation-en    &#xA;Hit http://us.archive.ubuntu.com trusty-backports/universe Translation-en      &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://us.archive.ubuntu.com trusty/main Translation-en_US                 &#xA;Ign http://us.archive.ubuntu.com trusty/multiverse Translation-en_US           &#xA;Ign http://us.archive.ubuntu.com trusty/restricted Translation-en_US           &#xA;Ign http://us.archive.ubuntu.com trusty/universe Translation-en_US             &#xA;Err http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;  404  Not Found&#xA;Err http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;  404  Not Found&#xA;Ign http://ppa.launchpad.net trusty/main Translation-en_US                     &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en                        &#xA;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1124" LastEditorUserId="3757" LastEditDate="2016-05-07T04:30:44.953" LastActivityDate="2016-05-07T04:30:44.953" Title="elementary tweaks will not Install" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-15T22:57:03.117" ContentLicense="CC BY-SA 3.0" />
  <row Id="1571" PostTypeId="2" ParentId="1570" CreationDate="2015-08-26T02:42:16.667" Score="2" Body="&lt;p&gt;That PPA is no longer being updated (it was pre-freya). The current one is the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note: Not all of the features are functional as of yet.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="1125" LastEditorUserId="129" LastEditDate="2015-08-26T12:14:59.780" LastActivityDate="2015-08-26T12:14:59.780" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1572" PostTypeId="1" CreationDate="2015-08-26T03:26:19.667" Score="1" ViewCount="39" Body="&lt;p&gt;Have been using Elementary (latest) for a week and running well. &#xA;Default admin user as me.&#xA;After installing some new software, next time I went to start, I get the login screen which does not accept my pwd, but recycles back to login screen.&#xA;However, if I go to bash, and sudo my username and password work perfectly.&#xA;If I go to recovery mode that has not helped but I dont know how to reset the Xorg file as trying X -config does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To summarise, there is a login screen whereas before I was logged in automatically, and the login screen will not accept me, but accepts guest login only.&lt;/p&gt;&#xA;" OwnerUserId="1127" LastEditorUserId="1127" LastEditDate="2015-08-26T21:26:50.327" LastActivityDate="2015-08-26T21:26:50.327" Title="SOLVED Elementary Login wont accept user" Tags="|system|greeter|" AnswerCount="0" CommentCount="2" ClosedDate="2015-08-27T05:17:44.123" ContentLicense="CC BY-SA 3.0" />
  <row Id="1573" PostTypeId="1" CreationDate="2015-08-26T03:48:38.567" Score="1" ViewCount="771" Body="&lt;p&gt;2010 iMac&lt;br&gt;&#xA;I'm trying to install Freya from a usb drive. I get to the menu with the initial 4 options and choose &quot;install elementary OS&quot;. The screen clears and I see about 4 lines of terminal text. Then there's a small pause and it says &quot;controller not found&quot;. Then the screen goes dark and the computer is unresponsive.&lt;br&gt;&#xA;I did check the hash of the iso before I burned it (using unetbootin) and it was fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: after some googling, it seems like the issue may be that I need to enable &quot;nomodeset&quot; when installing. How do I do that?&lt;/p&gt;&#xA;" OwnerUserId="1115" LastEditorUserId="1115" LastEditDate="2015-08-26T05:52:53.530" LastActivityDate="2015-09-25T17:42:02.183" Title="Crash when installing from usb drive" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1575" PostTypeId="1" AcceptedAnswerId="1576" CreationDate="2015-08-26T04:55:55.430" Score="3" ViewCount="439" Body="&lt;p&gt;Whatever app i open in elementary freya, it opens in the background.And that includes the terminal using super+T or any app from the slinghshot. I then have to click on its icon in the dock and then open it.&lt;br&gt;&#xA;I searched online and saw &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1220179&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt; ,where &lt;a href=&quot;https://askubuntu.com/questions/310470/newly-opened-applications-open-in-background&quot;&gt;this solution&lt;/a&gt; is suggested. I tried but it didn't work for me.&lt;/p&gt;&#xA;" OwnerUserId="1128" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-26T12:14:41.620" Title="Windows(freya) always open in background?" Tags="|release-freya|window-management|gala|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1576" PostTypeId="2" ParentId="1575" CreationDate="2015-08-26T05:48:36.643" Score="4" Body="&lt;p&gt;IMO this is the single most frustrating bug present in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately the only realistic current fix for this bug I know about is applying &lt;a href=&quot;https://code.launchpad.net/~gala-dev/gala/always-focus-on-map/+merge/202686&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; patch to gala and recompiling it yourself. While the ability to do this is a testament to the power of opensource software, to avoid the headaches I have never gone down this route. It was proposed to merge the patch into gala, though seems to have been rejected on the grounds that it was a hacky workaround rather than fixing the underlying issue. Frustrating though understandable. If you attempt this (or anyone else has) it would be handy to document the steps involved somewhere and sharing with the rest of us.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is hope however as it &lt;em&gt;appears&lt;/em&gt; the problem was caused by a bug in GTK+ and &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=752000&quot; rel=&quot;nofollow noreferrer&quot;&gt;a fix&lt;/a&gt; may be forthcoming. I'm unsure if the gala developers have tested this or if there is any roadmap to implement it if it does in fact work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Workaround&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the meantime I have dealt with this annoyance by mapping the &lt;em&gt;multitasking view&lt;/em&gt; to the upper right hand corner of my screen and gotten used to selecting windows from there. It certainly doesn't fix the problem though in hindsight this has benefited me greatly as it is a great feature which enhances my work flow. Steps to do this are outlined in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1441/what-are-the-different-methods-to-switch-between-windows-and-workspaces?rq=1&quot;&gt;this&lt;/a&gt; answer. &lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2015-08-26T07:08:43.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1577" PostTypeId="2" ParentId="1341" CreationDate="2015-08-26T06:16:10.667" Score="3" Body="&lt;p&gt;You can disable notifications for your printer under:&lt;br&gt;&#xA;&lt;strong&gt;System Settings&lt;/strong&gt; -&gt; &lt;strong&gt;Notifications&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me there are two entries &lt;strong&gt;Printer&lt;/strong&gt; and &lt;strong&gt;System Config Printer Notification&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe just toggle them off/on helps to dismiss the notification.&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="3757" LastEditDate="2016-04-24T06:12:07.240" LastActivityDate="2016-04-24T06:12:07.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1578" PostTypeId="1" CreationDate="2015-08-26T07:42:12.320" Score="3" ViewCount="15136" Body="&lt;p&gt;I'm having real trouble connecting to my own network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can find the network (SSID) and enter the password just fine, but it can't connect from there. It keeps saying I'm disconnected. Tried everything I know of (forgetting the network, restarting modem etc.), but it seems more software/driver related. And I'm a noob on that part...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Internet via cable works just fine by the way. I already tried to update/upgrade everything via apt-get, but that didn't fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm just not sure how to proceed from here. :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;p.s. I'm at work at the moment, so replies may take a bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's de update after running &lt;code&gt;lshw -c network&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   *-network               &#xA;   description: Ethernet interface&#xA;   product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;   vendor: Realtek Semiconductor Co., Ltd.&#xA;   physical id: 0&#xA;   bus info: pci@0000:02:00.0&#xA;   logical name: eth0&#xA;   version: 10&#xA;   serial: e0:3f:49:c2:ba:2b&#xA;   size: 10Mbit/s&#xA;   capacity: 1Gbit/s&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;   resources: irq:60 ioport:e000(size=256) memory:f7d04000-f7d04fff memory:f7d00000-f7d03fff&#xA;&#xA;   *-network&#xA;   description: Wireless interface&#xA;   product: AR9485 Wireless Network Adapter&#xA;   vendor: Qualcomm Atheros&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   logical name: wlan0&#xA;   version: 01&#xA;   serial: 6c:71:d9:d4:74:9d&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless&#xA;   configuration: broadcast=yes driver=ath9k driverversion=3.16.0-45-generic firmware=N/A ip=192.168.1.16 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:19 memory:f7c00000-f7c7ffff memory:f7c80000-f7c8ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I do have WiFi now while the adapter is &lt;strong&gt;not&lt;/strong&gt; connected. I just needed to select my network and it worked directly... So it still might be power management somehow?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just copied my syslog to Pastebin: &lt;a href=&quot;http://pastebin.com/RTLHFBQk&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com/RTLHFBQk&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1129" LastEditorUserId="3757" LastEditDate="2016-05-06T14:16:21.543" LastActivityDate="2016-05-06T14:16:21.543" Title="Unable to connect to own WiFi network (Freya)" Tags="|release-freya|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1579" PostTypeId="2" ParentId="1578" CreationDate="2015-08-26T07:51:16.830" Score="2" Body="&lt;p&gt;Please update your post with the output from &lt;code&gt;lshw -c network&lt;/code&gt; as this will provide us with information regarding your WiFi device and driver in use. Also examine and provide any information you can gleam (or the entire contents on somewhere like pastebin) from the commands &lt;code&gt;dmesg&lt;/code&gt; and &lt;code&gt;cat /var/log/syslog&lt;/code&gt; relating to your WiFi device (usually called wlan0)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the extra info. The &lt;code&gt;lshw&lt;/code&gt; command tells us the chipset of your WiFi device is an &lt;em&gt;Atheros AR9485&lt;/em&gt; and is using the &lt;em&gt;ath9k&lt;/em&gt; driver. You even have an IP so I presume this output was after you got it to connect?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't see anything obvious in your syslog. Did you gather this info immediately after a failed connection?&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;NetworkManager[873]:  nl_recvmsgs() error: (-33) Dump&#xA;  inconsistency detected, interrupted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The above message does appear often, though from what I can see it isn't really an issue and this logging has &lt;a href=&quot;http://cgit.freedesktop.org/NetworkManager/NetworkManager/commit/?id=e0a972461156c12ad1be40f4a4ed84705c4603aa&quot; rel=&quot;nofollow&quot;&gt;been patched&lt;/a&gt; out of recent versions of network-manager anyway. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a couple of common fixes for ath9k driver issues you could try. I suggest just testing with the temporary methods.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;Disable Hardware Encryption&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Temporary&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r ath9k&#xA;sudo modprobe ath9k nohwcrypt=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Permanent&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /etc/modprobe.d/ath9k.conf&#xA;sudo scratch-text-editor /etc/modprobe.d/ath9k.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;options ath9k nohwcrypt=1&lt;/code&gt; as the last line&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;Disable WiFi Power Saving&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Temporary&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwconfig wlan0 power off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(or)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r ath9k&#xA;sudo modprobe ath9k ps_enable=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Permanent&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /etc/modprobe.d/ath9k.conf&#xA;sudo scratch-text-editor /etc/modprobe.d/ath9k.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;options ath9k ps_enable=0&lt;/code&gt; as the last line&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-09-02T11:50:09.407" LastActivityDate="2015-09-02T11:50:09.407" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1582" PostTypeId="2" ParentId="1566" CreationDate="2015-08-26T10:30:56.010" Score="6" Body="&lt;p&gt;I managed to fix this problem by checking the &lt;em&gt;Purge GRUB before reinstalling it&lt;/em&gt; in the &lt;em&gt;GRUB option&lt;/em&gt; tab.&lt;/p&gt;&#xA;" OwnerUserId="207" LastActivityDate="2015-08-26T10:30:56.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1583" PostTypeId="2" ParentId="1568" CreationDate="2015-08-26T12:21:20.477" Score="4" Body="&lt;p&gt;&lt;code&gt;apt-get autoremove&lt;/code&gt; does not remove old kernels (by design). If you want to free up some space by removing old kernels you have to do this manually, but it's advised that the latest two kernel versions remain.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;How-to remove old kernels manually&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Fair warning&lt;/strong&gt;: You should only mess with kernels (removing as well as manually installing new ones) if there is a need for it (space constraints or problems with the current kernel). Figuratively the kernel is the heart of your system, elementary really can't live without it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Lines starting with &lt;code&gt;$&lt;/code&gt; denote commands you have to input in terminal, the following text is example output from my machine.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First display the kernel you are currently using, you want to keep that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;3.19.0-26-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then list all currently installed kernels:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg -l | grep linux-image-&#xA;ii  linux-image-3.13.0-62-generic               3.13.0-62.102                                                   amd64        Linux kernel image for version 3.13.0 on 64 bit x86 SMP&#xA;ii  linux-image-3.16.0-46-generic               3.16.0-46.62~14.04.1                                            amd64        Linux kernel image for version 3.16.0 on 64 bit x86 SMP&#xA;ii  linux-image-3.19.0-26-generic               3.19.0-26.28~14.04.1                                            amd64        Linux kernel image for version 3.19.0 on 64 bit x86 SMP&#xA;ii  linux-image-extra-3.13.0-62-generic         3.13.0-62.102                                                   amd64        Linux kernel extra modules for version 3.13.0 on 64 bit x86 SMP&#xA;ii  linux-image-extra-3.16.0-46-generic         3.16.0-46.62~14.04.1                                            amd64        Linux kernel extra modules for version 3.16.0 on 64 bit x86 SMP&#xA;ii  linux-image-extra-3.19.0-26-generic         3.19.0-26.28~14.04.1                                            amd64        Linux kernel extra modules for version 3.19.0 on 64 bit x86 SMP&#xA;ii  linux-image-generic-lts-vivid               3.19.0.26.13                                                    amd64        Generic Linux kernel image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This means there are currently three kernels installed. The last entry for &lt;code&gt;linux-image-generic-lts-vivid&lt;/code&gt; is a meta package which does not use much disk space (from installing the Ubuntu Vivid kernel in Freya) and should not be removed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can now remove kernels you don't need anymore. Make sure to at least keep two kernels around, which should be the &lt;strong&gt;absolute minimum&lt;/strong&gt; so you have at least one backup if the most recent kernel fails.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get autoremove linux-image-3.13.0-62-generic&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages will be REMOVED&#xA;  linux-image-3.13.0-62-generic linux-image-extra-3.13.0-62-generic&#xA;0 to upgrade, 0 to newly install, 2 to remove and 0 not to upgrade.&#xA;After this operation, 194 MB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can now check the list of installed kernels again with &lt;code&gt;dpkg -l | grep linux-image-&lt;/code&gt;. If a line starts with &lt;code&gt;rc&lt;/code&gt; this only means there is residual config files remaining (uses little to no space).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/Lubuntu/Documentation/RemoveOldKernels&quot; rel=&quot;nofollow&quot;&gt;&lt;em&gt;Adapted from Ubuntu documentation wiki, written by its contributors (cc-by-sa 3.0).&lt;/em&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-08-26T17:40:59.833" LastActivityDate="2015-08-26T17:40:59.833" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1584" PostTypeId="1" AcceptedAnswerId="1587" CreationDate="2015-08-26T12:43:42.687" Score="5" ViewCount="466" Body="&lt;p&gt;I'm using elementary OS Freya and I'm having problems when I want to quit apps from the indicator in wingpanel (right click over the icon, quit skype for example), the app doent close and I have to kill it by killing the process. Anyboby else is having this issue?&lt;/p&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="3757" LastEditDate="2016-04-27T01:41:49.073" LastActivityDate="2016-04-27T01:41:49.073" Title="problems with wingpanel apps indicator" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2015-08-27T06:38:57.620" ContentLicense="CC BY-SA 3.0" />
  <row Id="1585" PostTypeId="2" ParentId="1578" CreationDate="2015-08-26T13:45:48.910" Score="0" Body="&lt;p&gt;I was having similar problems and it was because of my wifi card (realtek) and the drivers out of date. you should check your wifi card (lshw -c network) and then search the web if that is having drivers problem or something.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-08-26T13:45:48.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1587" PostTypeId="2" ParentId="1584" CreationDate="2015-08-26T14:19:05.013" Score="4" Body="&lt;p&gt;It's a known bug that will hopefully be fixed in near future.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although the menu opens on right click at the icon, it doesn't react on further clicks. You have to left click at the indicator icons in order to get a working menu.  &lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-26T14:19:05.013" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1588" PostTypeId="1" CreationDate="2015-08-26T15:37:18.313" Score="0" ViewCount="59" Body="&lt;p&gt;i've just updated elementary and now the terminal does not show the header.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what's wrong and how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="208" LastActivityDate="2015-08-29T00:17:50.550" Title="Terminal lost header on latest update" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1591" PostTypeId="2" ParentId="1573" CreationDate="2015-08-26T16:58:40.347" Score="1" Body="&lt;p&gt;Nevermind, got it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press &quot;e&quot; on the boot screen to edit the loading command. Go to where it says &quot;quiet splash&quot; and type &quot; nomodeset&quot; after that. Press F10 to boot.&lt;/p&gt;&#xA;" OwnerUserId="1115" LastActivityDate="2015-08-26T16:58:40.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1592" PostTypeId="1" CreationDate="2015-08-26T17:14:40.070" Score="5" ViewCount="2960" Body="&lt;p&gt;I'm going through the steps to install my GTX 970 Driver onto my Elementary OS system but when I run the following command, I get a blank screen...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sudo service lightdm stop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I believe I am supposed to get a terminal-type of screen, but am met with nothing at all. Is there a way to fix this? &lt;/p&gt;&#xA;" OwnerUserId="1124" LastEditorUserId="578" LastEditDate="2017-02-11T19:14:10.230" LastActivityDate="2017-02-11T19:14:10.230" Title="Installing NVidia Drivers - Blank Screen" Tags="|graphic-drivers|command-line|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1593" PostTypeId="1" AcceptedAnswerId="1635" CreationDate="2015-08-26T17:24:34.277" Score="7" ViewCount="991" Body="&lt;p&gt;I just bought a new mouse with more buttons than my old one. While they work fine and I can navigate back and forth with the thumb buttons, I would like to know if I can somehow change thumb buttons so that I can switch between windows (basically like &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I took a look at &quot;xbindkeys&quot;, but it does not do what I am looking for, since I had no option to add &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; to the mouse button:8. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a bonus: would it be possible to assign different shortcuts per app? &lt;/p&gt;&#xA;" OwnerUserId="474" LastEditorUserId="190" LastEditDate="2015-08-28T23:47:35.593" LastActivityDate="2015-08-28T23:47:35.593" Title="Bind mouse buttons to switch between windows" Tags="|keyboard-shortcuts|window-management|mouse|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1594" PostTypeId="2" ParentId="1340" CreationDate="2015-08-26T18:14:16.660" Score="1" Body="&lt;p&gt;Thunderbird 38.2 is now available in the official repositories. I strongly recommend to use the official stable release instead of an unstable beta repository.&lt;br&gt;&#xA;In case you have been following &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1390/22&quot;&gt;RolandiXor's answer&lt;/a&gt;, you need to remove the &lt;code&gt;ppa:mozillateam/thunderbird-next&lt;/code&gt; repository, update your sources, and reinstall Thunderbird:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:mozillateam/thunderbird-next&#xA;sudo apt-get update&#xA;sudo apt-get install --reinstall thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you didn't install any beta version, just install Thunderbird:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-08-27T22:13:37.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1595" PostTypeId="1" CreationDate="2015-08-26T18:40:16.707" Score="0" ViewCount="78" Body="&lt;p&gt;It seems that my Belkin N1 Wireless Express card (F5D8071) is not compatible with Elementary OS. For Ubuntu there seems to be an experimental driver: &lt;a href=&quot;http://www.thinkwiki.org/wiki/How_to_checkout_and_install_madwifi_experimental_driver_for_ar5008&quot; rel=&quot;nofollow&quot;&gt;http://www.thinkwiki.org/wiki/How_to_checkout_and_install_madwifi_experimental_driver_for_ar5008&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will this be supported?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tijmen&lt;/p&gt;&#xA;" OwnerUserId="1146" LastActivityDate="2015-09-26T05:56:20.857" Title="Compatibility Belkin N1 Wireless Express card (F5D8071)" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1596" PostTypeId="1" CreationDate="2015-08-26T19:37:19.203" Score="2" ViewCount="56" Body="&lt;p&gt;I accidentally deleted a startup application in Luna which leaves me with a blank desktop without Plank or Slingshot at startup...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It must have been from the top of the list which is in alphabetical order, if that helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues which one that could have been and how to get it back?&lt;/p&gt;&#xA;" OwnerUserId="1147" LastEditorUserId="84" LastEditDate="2015-08-26T21:20:52.293" LastActivityDate="2015-08-26T23:42:53.467" Title="Deleted (seemingly essential) startup application" Tags="|luna|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1598" PostTypeId="2" ParentId="1568" CreationDate="2015-08-26T22:58:43.197" Score="0" Body="&lt;p&gt;You can use &lt;code&gt;apt-get autoremove&lt;/code&gt; to free space if there are things in your disk that aren't necessary for the system anymore. If you run &lt;code&gt;apt-get upgrade&lt;/code&gt; there you'll see a message that will tell you if there are things that you can remove with apt-get autoremove.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree     &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  libassuan0 libgmime-2.6-0 libgpgme11 libmessaging-menu0&#xA;Use 'apt-get autoremove' to remove them.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="68" LastEditDate="2015-08-27T20:18:49.123" LastActivityDate="2015-08-27T20:18:49.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1599" PostTypeId="2" ParentId="1596" CreationDate="2015-08-26T23:42:53.467" Score="4" Body="&lt;p&gt;You've most likely removed &lt;code&gt;cerbere&lt;/code&gt; which is the process that starts (and watches) desktop components like the panel, dock, and applications menu.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal with &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; and run &lt;code&gt;gnome-session-properties&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add &lt;code&gt;cerbere&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-26T23:42:53.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1600" PostTypeId="1" CreationDate="2015-08-27T02:56:33.573" Score="1" ViewCount="101" Body="&lt;p&gt;How to block or prevent USB storage mount automatically?&#xA;i have tried using this code, but doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried using this code, but it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo echo &quot;blacklist usb-storage&quot; &amp;gt;&amp;gt; /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1150" LastEditorUserId="1150" LastEditDate="2015-09-25T02:41:21.160" LastActivityDate="2015-09-25T10:12:36.187" Title="How to block USB storage?" Tags="|usb-drive|" AnswerCount="1" CommentCount="4" ClosedDate="2015-09-27T23:53:43.677" ContentLicense="CC BY-SA 3.0" />
  <row Id="1603" PostTypeId="1" AcceptedAnswerId="1625" CreationDate="2015-08-27T04:20:37.767" Score="4" ViewCount="369" Body="&lt;p&gt;I've only had Freya on my computer for 3 days. I'm guessing it's something to do with the Ubuntu updates which changed my logo. So far nothing more than this logo has changed, Grub still calls it elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm sure I didn't change the update settings. I am using Moka icon theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way that I can change the logo back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KAbFz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KAbFz.png&quot; alt=&quot;Screenshot of Ubuntu Logo in Switchboard&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1153" LastEditorUserId="45" LastEditDate="2015-08-28T21:31:38.693" LastActivityDate="2015-08-28T21:31:38.693" Title="Why does my elementary OS Freya show an Ubuntu logo?" Tags="|settings|themes|ubuntu|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1604" PostTypeId="1" CreationDate="2015-08-27T05:23:55.927" Score="2" ViewCount="308" Body="&lt;p&gt;Is this safe to do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ea9gV.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like to make sure my software is complete, but do not want to ruin the beautiful setup of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="1154" LastEditorUserId="22" LastEditDate="2015-08-27T16:44:40.910" LastActivityDate="2015-08-29T14:50:08.210" Title="Software Update is offering 14.10" Tags="|release-freya|updates|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1605" PostTypeId="2" ParentId="1595" CreationDate="2015-08-27T05:33:21.910" Score="1" Body="&lt;p&gt;The MadWifi driver has long been depreciated. It is however likely that the same install instructions in your link will work for elementary OS. It is also possible that your card is supported by either the ath5k or ath9k driver included with elementary OS. As expresscard34 devices can sometimes be handled by either the PCI or alternatively the USB bus can you give us the output of both &lt;code&gt;lspci&lt;/code&gt; and &lt;code&gt;lsusb&lt;/code&gt; and &lt;code&gt;lshw -c network&lt;/code&gt;. Also anything from the &lt;code&gt;dmesg&lt;/code&gt; command related to &lt;em&gt;ath0&lt;/em&gt; or &lt;em&gt;wlan0&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-08-27T05:33:21.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1606" PostTypeId="1" AcceptedAnswerId="1615" CreationDate="2015-08-27T07:19:05.633" Score="1" ViewCount="1684" Body="&lt;p&gt;I would like to keep elementary OS on a USB 3.0 drive, to use a private OS on a business laptop . I'll use the OS for office apps (probably Libre), FreeCad and some IDEs including subversion clients. The required data should be stored on the USB as well. The laptop this should run with is a T430 with nVidia NVS5400m (important for FreeCad).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to expect any lack of stability or system performance, compared to booting from an internal drive (beside the slower writing/reading speed from the usb-hub compared to an internal SSD)? And is there any possibility that the company recognizes this?&lt;/p&gt;&#xA;" OwnerUserId="881" LastEditorUserId="68" LastEditDate="2015-08-28T01:36:39.110" LastActivityDate="2015-08-29T14:49:56.093" Title="Usage of elementary OS on USB (persistent)" Tags="|boot|usb-drive|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1607" PostTypeId="2" ParentId="1563" CreationDate="2015-08-27T07:45:00.340" Score="2" Body="&lt;p&gt;In my opinion, Freya will have lower performance. I have not a single fact but I remember the &quot;exposé effect&quot; much smoother in Luna that in Freya, for example.&lt;/p&gt;&#xA;" OwnerUserId="145" LastEditorUserId="5565" LastEditDate="2016-09-30T07:23:24.773" LastActivityDate="2016-09-30T07:23:24.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1608" PostTypeId="1" CreationDate="2015-08-27T07:50:20.973" Score="5" ViewCount="3345" Body="&lt;p&gt;I left Linux Mint to try elementary OS since I was having problems with sound not working. Unfortunately, it appears to be a universal Ubuntu problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes when I boot into elementary OS, there is sound for media, system sound etc., but most times, after I boot, there are no sounds at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use the Pulse Audio Volume meter, the VU bars move and indicate that sound is being processed but just not being passed to the speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the sound settings GUI, the volume is up and not muted and the soundcard is detected and selected as &quot;Speakers Built-In Audio&quot;, but when I test the speakers, there is no sound, no media sound and no system sounds. Headphones work fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have confirmed that the speakers and soundcard work consistently well on Windows 7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have followed several Ubuntu guides to try and fix this now common error, but to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running a Lenovo/IBM ThinkPad X201.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a script I can run at startup to kick the audio into life? Or maybe I need a propriety driver? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="1156" LastEditorUserId="1156" LastEditDate="2015-10-24T11:02:24.500" LastActivityDate="2015-10-24T11:02:24.500" Title="Sometimes I have sound, sometimes no sound, why?" Tags="|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1609" PostTypeId="2" ParentId="1240" CreationDate="2015-08-27T07:50:55.467" Score="5" Body="&lt;p&gt;What I did for change the Qt apps style is add this line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;QT_STYLE_OVERRIDE=gtk&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In the environment file:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gedit /etc/environment&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then reboot the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how Focus Writer looks like in my system:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/LwRhA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LwRhA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="145" LastEditorUserId="145" LastEditDate="2015-09-03T10:12:04.830" LastActivityDate="2015-09-03T10:12:04.830" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1612" PostTypeId="1" CreationDate="2015-08-27T09:25:30.483" Score="2" ViewCount="2564" Body="&lt;p&gt;Mac user here. I have two laptops, a late 2010 MacBook Air (Intel Core 2 duo) and a late 2011 MacBook Pro 17&quot; (Intel i7). Having read about elementaryOS Freya, I thought I'd like to try installing it on an external USB to try it out as an alternative OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded both the 64bit and 32bit versions, as well as UNetbootin, and have followed the installation instructions on the website, installing it on a 32GB thumb drive and on an USB-2 External. I tried the 64bit on the MBP with the thumb drive, and the 32bit on the MBA using the external HD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In each case the process seems to run through normally, to the point where it says I should re-boot holding down the option key, but it then gives me the warning that the Mac won't boot from a USB (not actually the case) and when I reboot holding down the Option key, as the website explains, the USB drives are not found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to proceed?&lt;/p&gt;&#xA;" OwnerUserId="1159" LastEditorUserId="84" LastEditDate="2015-08-27T16:44:06.887" LastActivityDate="2015-09-03T22:22:53.477" Title="Problems installing Freya on Mac through USB drive" Tags="|release-freya|system-installation|macbook|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1613" PostTypeId="1" AcceptedAnswerId="1665" CreationDate="2015-08-27T09:38:50.183" Score="9" ViewCount="2031" Body="&lt;p&gt;How can I replace Geary when trying to send files directly via mail with Thunderbird? I already set Thunderbird as the mail application in the system settings, but I still have to open a new mail account when using the right-click-functionality (which I don't want).&lt;/p&gt;&#xA;" OwnerUserId="310" LastEditorUserId="310" LastEditDate="2015-08-27T14:02:46.777" LastActivityDate="2016-08-03T19:04:15.143" Title="Replacing Geary with Thunderbird" Tags="|pantheon-mail|thunderbird|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1614" PostTypeId="2" ParentId="1604" CreationDate="2015-08-27T09:40:09.300" Score="4" Body="&lt;p&gt;I highly doubt that that is from elementary, more like something from Ubuntu. Don't do that, it can and will kill your current elementary OS installation.&lt;/p&gt;&#xA;" OwnerUserId="310" LastEditorUserId="34" LastEditDate="2015-08-29T14:50:08.210" LastActivityDate="2015-08-29T14:50:08.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1615" PostTypeId="2" ParentId="1606" CreationDate="2015-08-27T09:43:05.693" Score="4" Body="&lt;p&gt;Lack of stability or system performance: Once configured, I don't think so (never experienced some, from OpenSuse in the early days till Arch, Kali and Mint today), except the slower speed while booting and installing because of the usb stick. The company could see it if the boot parameters are changed in the bios, but there could be other ways. Nevertheless, ask your IT department first before testing it for legal problems!&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2015-08-27T09:43:05.693" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1616" PostTypeId="1" AcceptedAnswerId="1622" CreationDate="2015-08-27T10:01:49.117" Score="3" ViewCount="262" Body="&lt;p&gt;Occasionally my touchpad is disabled on resume from suspend. I then manually run the following command to re-enable my touchpad:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/bin/synclient TouchpadOff=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is it possible to automate this command to be executed on resume from suspend if the touchpad is disabled (for to me unknown reasons)?&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-08-27T14:09:58.987" Title="How to automatically re-enable the touchpad after resume from suspend?" Tags="|touchpad|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1617" PostTypeId="1" CreationDate="2015-08-27T10:08:36.297" Score="2" ViewCount="5196" Body="&lt;p&gt;I've been hating using Windows for quite a while and I'm trying Freya as a possible substitute.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I can't do updates to the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get a window with the warning written in the title of question. If I continue, it says sources are not trusted and after clicking to continue it does nothing. On terminal, using update command, it always shows the same things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: I uninstalled the software updater and installed again. Tried some more times to update. I managed to update twice (~60Mb in first update and some Kb in second) and I have freya for 1 month. Nothing else showed up. The terminal always shows a long text with different things and errors (and download speeds etc):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question of Daniel: I added ppa, I read in my websites that it would be a plus after installing freya. Ops?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I was some time away, hence the late edits. I'm sorry if I'm not formatting correctly since all this is new to me&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;EDIT2&lt;/strong&gt;&lt;/em&gt;: Thanks for the terminal tip on formatting; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;other software&quot; tab is in &quot;settings&quot; inside software updater but not on &quot;system settings&quot;. There are lots of repeated names like &lt;em&gt;recommended updates&lt;/em&gt; three times, but each one has a different &lt;em&gt;component&lt;/em&gt; when I click &lt;em&gt;edit&lt;/em&gt; and the same applies to other update sources on the list. Should I keep them? I ran the commands in terminal (sudo clean, update, upgrade) and the output is similar and when I go to &lt;em&gt;software updater&lt;/em&gt; the same updates are listed with the exception 0f 3Mb (total 67Mb) and no 0.3.1 or different things from before. I would really like to switch from Win7 to Freya but I still need to get it working (almost) perfect (e.g updates) but I'm inexperienced (I hope it's possible!!). Thanks in advance for your time&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT3&lt;/strong&gt; So I managed to do updates (partially, couldn't install each update fully due to errors) but now I get errors: &lt;em&gt;boot partition low space&lt;/em&gt; so can't install stuff without warnings nor updates. SOmehow I now have freya 0.3.1 which wasn't mentioned in the updates' list o.o&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;antonio@A-Computer:~$ sudo apt-get update&#xA;[sudo] password for antonio: &#xA;0% [Connecting to archive.ubuntu.com] [Connecting to pt.archive.ub&#xA;Ign http://pt.archive.ubuntu.com trusty-updates InRelease&#xA;6% [Connecting to archive.ubuntu.com (91.189.91.14)] [Connecting t&#xA;Ign http://pt.archive.ubuntu.com trusty-backports InRelease&#xA;11% [Connecting to archive.ubuntu.com (91.189.91.14)] [Connecting&#xA;Get:1 http://pt.archive.ubuntu.com trusty-updates Release.gpg [933 B]&#xA;99% [Waiting for headers] [1 Release.gpg 933 B/933 B 100%] [Waitin&#xA;Hit http://pt.archive.ubuntu.com trusty-backports Release.gpg&#xA;Get:2 http://pt.archive.ubuntu.com trusty-updates Release [63,5 kB]&#xA;3% [Waiting for headers] [2 Release 1182 B/63,5 kB 2%] [Waiting fo&#xA;Ign http://archive.ubuntu.com trusty InRelease&#xA;Ign http://security.ubuntu.com trusty-security InRelease &#xA;100% [2 Release gpgv 63,5 kB] [Waiting for headers] [Waiting for h&#xA;100% [Waiting for headers] [Waiting for headers] [Waiting for head&#xA;Ign http://archive.ubuntu.com trusty-updates InRelease&#xA;Get:3 http://security.ubuntu.com trusty-security Release.gpg [933 B]&#xA;100% [Waiting for headers] [Waiting for headers] [3 Release.gpg 93  &#xA;Hit http://pt.archive.ubuntu.com trusty-backports Release&#xA;100% [Release gpgv 63,5 kB] [Waiting for headers] [Waiting for hea &#xA;100% [Waiting for headers] [Waiting for headers] [Waiting for head&#xA;Get:4 http://pt.archive.ubuntu.com trusty-updates/restricted amd64 Packages [15,4 kB]&#xA;82% [Waiting for headers] [4 Packages 1173 B/15,4 kB 8%] [Waiting&#xA;100% [Waiting for headers] [Waiting for headers] [Waiting for head&#xA;100% [4 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea &#xA;100% [Waiting for headers] [Waiting for headers] [Waiting for head&#xA;Ign http://archive.ubuntu.com trusty-proposed InRelease&#xA;Get:5 http://security.ubuntu.com trusty-security Release [63,5 kB]&#xA;57% [Waiting for headers] [Waiting for headers] [5 Release 1099 B/&#xA;Get:6 http://pt.archive.ubuntu.com trusty-updates/main amd64 Packages [614 kB]&#xA;13% [Waiting for headers] [6 Packages 5395 B/614 kB 1%] [5 Release&#xA;Ign http://archive.ubuntu.com trusty-backports InRelease&#xA;Hit http://archive.ubuntu.com trusty Release.gpg                  &#xA;Get:7 http://archive.ubuntu.com trusty-updates Release.gpg [933 B]&#xA;100% [7 Release.gpg 933 B/933 B 100%] [6 Packages 614 kB/614 kB 10&#xA;100% [6 Packages 614 kB/614 kB 100%] [5 Release 63,5 kB/63,5 kB 10&#xA;100% [6 Packages bzip2 0 B] [5 Release gpgv 63,5 kB] [Waiting for&#xA;100% [6 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea&#xA;Get:8 http://pt.archive.ubuntu.com trusty-updates/universe amd64 Packages [310 kB]&#xA;71% [6 Packages bzip2 0 B] [Waiting for headers] [8 Packages 2579&#xA;92% [Waiting for headers] [8 Packages 222 kB/310 kB 72%] [Waiting&#xA;Get:9 http://archive.ubuntu.com trusty-proposed Release.gpg [933 B]&#xA;99% [9 Release.gpg 933 B/933 B 100%] [8 Packages 294 kB/310 kB 95%&#xA;100% [8 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea&#xA;Get:10 http://security.ubuntu.com trusty-security/main amd64 Packages [339 kB]&#xA;76% [8 Packages bzip2 0 B] [Waiting for headers] [Waiting for head&#xA;Get:11 http://pt.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [11,9 kB]&#xA;78% [8 Packages bzip2 0 B] [Waiting for headers] [11 Packages 258179% [8 Packages bzip2 0 B] [Waiting for headers] [10 Packages 39,1&#xA;Get:12 http://pt.archive.ubuntu.com trusty-updates/restricted i386 Packages [15,1 kB]&#xA;78% [8 Packages bzip2 0 B] [Waiting for headers] [12 Packages 1173&#xA;79% [8 Packages bzip2 0 B] [Waiting for headers] [10 Packages 39,1&#xA;Hit http://archive.ubuntu.com trusty-backports Release.gpg&#xA;79% [8 Packages bzip2 0 B] [Waiting for headers] [10 Packages 39,1&#xA;79% [Waiting for headers] [Waiting for headers] [10 Packages 39,1 &#xA;79% [11 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea&#xA;79% [Waiting for headers] [Waiting for headers] [10 Packages 39,1&#xA;79% [12 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea&#xA;79% [Waiting for headers] [Waiting for headers] [10 Packages 40,5&#xA;Get:13 http://pt.archive.ubuntu.com trusty-updates/main i386 Packages [595 kB]&#xA;57% [Waiting for headers] [13 Packages 3987 B/595 kB 1%] [10 Packa&#xA;Hit http://archive.ubuntu.com trusty Release&#xA;76% [13 Packages 370 kB/595 kB 62%] [10 Packages 81,3 kB/339 kB 24&#xA;76% [Release gpgv 58,5 kB] [Waiting for headers] [13 Packages 373&#xA;77% [Waiting for headers] [13 Packages 386 kB/595 kB 65%] [10 Pack&#xA;88% [13 Packages bzip2 0 B] [Waiting for headers] [Waiting for hea&#xA;Get:14 http://archive.ubuntu.com trusty-updates Release [63,5 kB]&#xA;87% [13 Packages bzip2 0 B] [14 Release 3930 B/63,5 kB 6%] [Waitin&#xA;Get:15 http://pt.archive.ubuntu.com trusty-updates/universe i386 Packages [311 kB]&#xA;77% [13 Packages bzip2 0 B] [14 Release 13,8 kB/63,5 kB 22%] [15 P&#xA;86% [14 Release 13,8 kB/63,5 kB 22%] [15 Packages 229 kB/311 kB 74&#xA;90% [14 Release 13,8 kB/63,5 kB 22%] [10 Packages 142 kB/339 kB 42&#xA;90% [15 Packages bzip2 0 B] [14 Release 13,8 kB/63,5 kB 22%] [Wait&#xA;Get:16 http://pt.archive.ubuntu.com trusty-updates/multiverse i386 Packages [12,1 kB]&#xA;92% [15 Packages bzip2 0 B] [14 Release 30,7 kB/63,5 kB 48%] [16 P&#xA;92% [15 Packages bzip2 0 B] [14 Release 30,7 kB/63,5 kB 48%] [10 P&#xA;Get:17 http://pt.archive.ubuntu.com trusty-updates/main Translation-en [297 kB]&#xA;82% [15 Packages bzip2 0 B] [14 Release 30,7 kB/63,5 kB 48%] [17 T&#xA;83% [14 Release 30,7 kB/63,5 kB 48%] [17 Translation-en 26,5 kB/29&#xA;83% [16 Packages bzip2 0 B] [14 Release 30,7 kB/63,5 kB 48%] [17 T&#xA;83% [14 Release 30,7 kB/63,5 kB 48%] [17 Translation-en 42,0 kB/29&#xA;93% [14 Release 30,7 kB/63,5 kB 48%] [10 Packages 184 kB/339 kB 54&#xA;93% [17 Translation-en bzip2 0 B] [14 Release 30,7 kB/63,5 kB 48%]&#xA;Hit http://pt.archive.ubuntu.com trusty-updates/multiverse Translation-en&#xA;96% [17 Translation-en bzip2 0 B] [14 Release 60,2 kB/63,5 kB 95%]&#xA;96% [Translation-en 21,7 kB] [17 Translation-en bzip2 0 B] [14 Rel&#xA;96% [17 Translation-en bzip2 0 B] [14 Release 60,2 kB/63,5 kB 95%]&#xA;Hit http://pt.archive.ubuntu.com trusty-updates/restricted Translation-en&#xA;96% [17 Translation-en bzip2 0 B] [14 Release 60,2 kB/63,5 kB 95%]&#xA;96% [Translation-en 30,3 kB] [17 Translation-en bzip2 0 B] [14 Rel&#xA;96% [17 Translation-en bzip2 0 B] [14 Release 60,2 kB/63,5 kB 95%]&#xA;96% [14 Release 60,2 kB/63,5 kB 95%] [Waiting for headers] [10 Pac&#xA;Get:18 http://pt.archive.ubuntu.com trusty-updates/universe Translation-en [164 kB]&#xA;91% [14 Release 60,2 kB/63,5 kB 95%] [18 Translation-en 1171 B/164&#xA;96% [14 Release 60,2 kB/63,5 kB 95%] [10 Packages 236 kB/339 kB 70&#xA;96% [18 Translation-en bzip2 0 B] [14 Release 60,2 kB/63,5 kB 95%]&#xA;98% [18 Translation-en bzip2 0 B] [Waiting for headers] [Waiting f&#xA;98% [18 Translation-en bzip2 0 B] [14 Release gpgv 63,5 kB] [Waiti&#xA;98% [18 Translation-en bzip2 0 B] [Waiting for headers] [Waiting f&#xA;98% [Waiting for headers] [Waiting for headers] [10 Packages 284 k&#xA;Hit http://pt.archive.ubuntu.com trusty-backports/multiverse amd64 Packages&#xA;98% [Packages 3396 B] [Waiting for headers] [Waiting for headers]&#xA;98% [Waiting for headers] [Waiting for headers] [10 Packages 284 k   &#xA;Hit http://pt.archive.ubuntu.com trusty-backports/restricted amd64 Packages&#xA;99% [Packages 0 B] [Waiting for headers] [Waiting for headers] [10&#xA;99% [Waiting for headers] [Waiting for headers] [10 Packages 319 k&#xA;Get:19 http://archive.ubuntu.com trusty-proposed Release [211 kB]&#xA;93% [19 Release 8152 B/211 kB 4%] [Waiting for headers] [10 Packag&#xA;Hit http://pt.archive.ubuntu.com trusty-backports/main amd64 Packages&#xA;94% [19 Release 34,9 kB/211 kB 17%] [10 Packages 328 kB/339 kB 97%&#xA;94% [Packages 24,0 kB] [19 Release 34,9 kB/211 kB 17%] [Waiting fo&#xA;94% [19 Release 34,9 kB/211 kB 17%] [Waiting for headers] [10 Pack&#xA;Hit http://pt.archive.ubuntu.com trusty-backports/universe amd64 Packages&#xA;94% [19 Release 34,9 kB/211 kB 17%] [10 Packages 339 kB/339 kB 100&#xA;94% [Packages 160 kB] [19 Release 34,9 kB/211 kB 17%] [Waiting for&#xA;94% [Packages 160 kB] [10 Packages bzip2 0 B] [19 Release 34,9 kB/&#xA;95% [10 Packages bzip2 0 B] [19 Release 34,9 kB/211 kB 17%] [Waiti&#xA;Hit http://pt.archive.ubuntu.com trusty-backports/multiverse i386 Packages&#xA;95% [10 Packages bzip2 0 B] [19 Release 34,9 kB/211 kB 17%] [Waiti95% [Packages 3341 B] [10 Packages bzip2 0 B] [19 Release 34,9 kB/95% [10 Packages bzip2 0 B] [19 Release 34,9 kB/211 kB 17%] [Waiti                                                                  Hit http://pt.archive.ubuntu.com trusty-backports/restricted i386 Packages&#xA;96% [10 Packages bzip2 0 B] [19 Release 71,5 kB/211 kB 34%] [Waiti96% [Packages 0 B] [10 Packages bzip2 0 B] [19 Release 71,5 kB/21196% [10 Packages bzip2 0 B] [19 Release 71,5 kB/211 kB 34%] [Waiti96% [19 Release 71,5 kB/211 kB 34%] [Waiting for headers] [Waiting                                                                  Get:20 http://security.ubuntu.com trusty-security/restricted amd64 Packages [8875 B]&#xA;96% [19 Release 71,5 kB/211 kB 34%] [Waiting for headers] [20 Pack                                                                  Hit http://pt.archive.ubuntu.com trusty-backports/main i386 Packages&#xA;                                                                  96% [19 Rhttp://security.ubuntu.com trusty-security/main i386 Packages [324 kB]&#xA;Hit http://archive.ubuntu.com trusty/main Sources       &#xA;94% [Sources 5000 kB] [Waiting for headers] [23 Packages 60,2 kB/3                                                                  Hit http://archive.ubuntu.com trusty/restricted Sources  &#xA;98% [Sources 22,9 kB] [Waiting for headers] [23 Packages 124 kB/32                                                                  98% [Waiting for headers] [23 Packages 124 kB/324 kB 38%]                                                                           Hit http://archive.ubuntu.com trusty/universe Sources&#xA;98% [23 Packages 186 kB/324 kB 57%]                                                                                                 98% [Sources 27,9 MB] [Waiting for headers] [23 Packages 186 kB/32                                                                  Hit http://archive.ubuntu.com trusty/multiverse Sources&#xA;99% [Sources 27,9 MB] [Waiting for headers] [23 Packages 236 kB/32                                                                  Hit http://archive.ubuntu.com trusty/main amd64 Packages&#xA;                                                                  100% [Sources 27,9 MB] [23 Packages 304 kB/324 kB 94%]                                                                              100% [Sources 27,9 MB] [23 Packages bzip2 0 B] [Waiting for header                                                                  Hit http://archive.ubuntu.com trusty/restricted amd64 Packages&#xA;100% [Sources 27,9 MB] [23 Packages bzip2 0 B] [Waiting for header                                                                  Get:24 http://security.ubuntu.com trusty-security/restricted i386 Packages [8846 B]&#xA;100% [Sources 27,9 MB] [Waiting for headers] [24 Packages 2473 B/8                                                                  100% [Sources 27,9 MB] [24 Packages bzip2 0 B] [Waiting for header                                                                  100% [Waiting for headers] [Waiting for headers]                  100% [Sources 711 kB] [Waiting for headers] [Waiting for headers] 100% [Waiting for headers] [Waiting for headers]                                                                                    100% [Packages 8235 kB] [Waiting for headers] [Waiting for headers                                                                  Hit http://archive.ubuntu.com trusty/universe amd64 Packages&#xA;                                                                  100% [Packages 8235 kB] [Waiting for headers]                                                                                       Get:25 http://security.ubuntu.com trusty-security/universe i386 Packages [116 kB]&#xA;                                                                  100% [Packages 8235 kB] [Waiting for headers] [25 Packages 2470 B/                                                                  100% [Waiting for headers] [25 Packages 46,1 kB/116 kB 40%]                                                                         100% [Packages 184 kB] [Waiting for headers] [25 Packages 46,1 kB/                                                                  100% [Waiting for headers] [25 Packages 46,1 kB/116 kB 40%]                                                                         100% [Packages 31,7 MB] [Waiting for headers] [25 Packages 46,1 kB                                                                  100% [Packages 31,7 MB] [Waiting for headers]                     100% [Packages 31,7 MB] [25 Packages bzip2 0 B] [Waiting for heade                                                                  100% [Packages 31,7 MB] [Waiting for headers] [Waiting for headers                                                                  Hit http://archive.ubuntu.com trusty/multiverse amd64 Packages&#xA;                                                                  100% [Packages 31,7 MB] [Waiting for headers]                                                               Get:26 http://security.ubuntu.com trusty-security/multiverse i386 Packages [3830 B]&#xA;                                                                  100% [Packages 31,7 MB] [Waiting for headers] [26 Packages 3830 B/                                                                  100% [Packages 31,7 MB] [Waiting for headers]                     100% [Packages 31,7 MB] [26 Packages bzip2 0 B] [Waiting for heade                                                                  100% [Packages 31,7 MB] [Waiting for headers] [Waiting for headers                                                                  Hit http://archive.ubuntu.com trusty/main i386 Packages&#xA;                                                                  100% [Packages 31,7 MB] [Waiting for headers]                                                                                       Get:27 http://security.ubuntu.com trusty-security/main Translation-en [185 kB]&#xA;100% [Packages 31,7 MB] [Waiting for headers] [27 Translation-en 5                                                                  Hit http://archive.ubuntu.com trusty/restricted i386 Packages&#xA;100% [Packages 31,7 MB] [27 Translation-en 81,3 kB/185 kB 44%]    100% [Waiting for headers] [27 Translation-en 84,1 kB/185 kB 45%] 100% [Packages 664 kB] [Waiting for headers] [27 Translation-en 84100% [Waiting for headers] [27 Translation-en 87,0 kB/185 kB 47%] 100% [Packages 8205 kB] [Waiting for headers] [27 Translation-en 8                                                                  Hit http://archive.ubuntu.com trusty/universe i386 Packages&#xA;100% [Packages 8205 kB] [27 Translation-en 167 kB/185 kB 90%]     100% [Packages 8205 kB] [Waiting for headers]                     100% [Packages 8205 kB] [27 Translation-en bzip2 0 B] [Waiting for                                                                  100% [27 Translation-en bzip2 0 B] [Waiting for headers] [Waiting                                                                   100% [Packages 185 kB] [27 Translation-en bzip2 0 B] [Waiting for                                                                   100% [27 Translation-en bzip2 0 B] [Waiting for headers] [Waiting                                                                   100% [Packages 31,7 MB] [27 Translation-en bzip2 0 B] [Waiting for                                                                  Hit http://archive.ubuntu.com trusty/multiverse i386 Packages&#xA;                                                                  100% [Packages 31,7 MB] [27 Translation-en bzip2 0 B] [Waiting for                                                                  Hit http://security.ubuntu.com trusty-security/multiverse Translation-en&#xA;100% [Packages 31,7 MB] [27 Translation-en bzip2 0 B] [Waiting for                                                                  100% [Packages 31,7 MB] [Waiting for headers] [Waiting for headers                                                                  Hit http://security.ubuntu.com trusty-security/restricted Translation-en&#xA;                                                                  100% [Packages 31,7 MB] [Waiting for headers]                                                                                       Hit http://archive.ubuntu.com trusty/main Translation-en&#xA;100% [Packages 31,7 MB] [Waiting for headers]                                                                                       Get:28 http://security.ubuntu.com trusty-security/universe Translation-en [67,6 kB]&#xA;100% [Packages 31,7 MB] [Waiting for headers] [28 Translation-en 5100% [Packages 31,7 MB] [Waiting for headers]                                                                                       100% [Packages 31,7 MB] [28 Translation-en bzip2 0 B] [Waiting for                                                                  100% [Packages 31,7 MB] [Waiting for headers]                     100% [Waiting for headers]                                        100% [Packages 674 kB] [Waiting for headers]                                                                                        Hit http://archive.ubuntu.com trusty/multiverse Translation-en&#xA;100% [Packages 674 kB]                                            100% [Waiting for headers]                                        100% [Translation-en 5770 B] [Waiting for headers]                100% [Waiting for headers]                                        100% [Translation-en 15,4 kB] [Waiting for headers]               100% [Waiting for headers]                                        100% [Translation-en 4149 kB] [Waiting for headers]               100% [Waiting for headers]                                        100% [Translation-en 409 kB] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Hit http://archive.ubuntu.com trusty/restricted Translation-en&#xA;100% [Waiting for headers]                                        100% [Translation-en 21,2 kB] [Waiting for headers]               100% [Waiting for headers]                                                                                                          Hit http://archive.ubuntu.com trusty/universe Translation-en&#xA;100% [Working]                                                    100% [Translation-en 18,6 MB] [Waiting for headers]                                                                                 Get:29 http://archive.ubuntu.com trusty-updates/main amd64 Packages [614 kB]&#xA;100% [Translation-en 18,6 MB] [29 Packages 8117 B/614 kB 1%]      100% [29 Packages 88,4 kB/614 kB 14%]                             100% [29 Packages 293 kB/614 kB 48%]                              100% [Working]                                                    100% [29 Packages bzip2 0 B] [Waiting for headers]                                                                                  Get:30 http://archive.ubuntu.com trusty-updates/universe amd64 Packages [310 kB]&#xA;100% [29 Packages bzip2 0 B] [30 Packages 5301 B/310 kB 2%]       100% [30 Packages 91,2 kB/310 kB 29%]                             100% [Working]                                                    100% [30 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:31 http://archive.ubuntu.com trusty-updates/multiverse amd64 Packages [11,9 kB]&#xA;100% [31 Packages 5303 B/11,9 kB 44%]                             100% [Working]                                                    100% [31 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:32 http://archive.ubuntu.com trusty-updates/restricted amd64 Packages [15,4 kB]&#xA;100% [32 Packages 9527 B/15,4 kB 62%]                             100% [Working]                                                    100% [32 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:33 http://archive.ubuntu.com trusty-updates/main i386 Packages [595 kB]&#xA;100% [33 Packages 3893 B/595 kB 1%]                               100% [33 Packages 530 kB/595 kB 89%]                              100% [Working]                                                    100% [33 Packages bzip2 0 B] [Waiting for headers]                                                                                  Get:34 http://archive.ubuntu.com trusty-updates/universe i386 Packages [311 kB]&#xA;100% [33 Packages bzip2 0 B] [34 Packages 3893 B/311 kB 1%]       100% [34 Packages 131 kB/311 kB 42%]                              100% [Working]                                                    100% [34 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:35 http://archive.ubuntu.com trusty-updates/multiverse i386 Packages [12,1 kB]&#xA;100% [35 Packages 3895 B/12,1 kB 32%]                             100% [Working]                                                    100% [35 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:36 http://archive.ubuntu.com trusty-updates/restricted i386 Packages [15,1 kB]&#xA;100% [36 Packages 5472 B/15,1 kB 36%]                             100% [Working]                                                    100% [36 Packages bzip2 0 B] [Waiting for headers]                100% [Waiting for headers]                                                                                                          Get:37 http://archive.ubuntu.com trusty-updates/main Translation-en [297 kB]&#xA;100% [37 Translation-en 1080 B/297 kB 0%]                         100% [Working]                                                    100% [37 Translation-en bzip2 0 B] [Waiting for headers]                                                                            Hit http://archive.ubuntu.com trusty-updates/multiverse Translation-en&#xA;100% [37 Translation-en bzip2 0 B]                                100% [Translation-en 21,7 kB] [37 Translation-en bzip2 0 B] [Waiti100% [37 Translation-en bzip2 0 B] [Waiting for headers]          100% [Waiting for headers]                                                                             &#xA;(etc)&#xA;/security.ubuntu.com_ubuntu_dists_trusty-security_multiverse_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/restricted amd64 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_restricted_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/main i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_main_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/universe i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_universe_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/multiverse i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_multiverse_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/restricted i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_restricted_binary-i386_Packages)&#xA;W: You may want to run apt-get update to correct these problems&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1162" LastEditorUserId="1170" LastEditDate="2015-09-14T09:39:45.380" LastActivityDate="2016-05-11T13:11:44.060" Title="Software Updater doesn't work: &quot;Failed to download repository information (check your internet connection)&quot;" Tags="|updates|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1618" PostTypeId="2" ParentId="1612" CreationDate="2015-08-27T10:57:52.650" Score="-2" Body="&lt;p&gt;Thanks. I don't think Macs have a BIOS, they use another system, and I wouldn't like to play around with that as it would likely render my Macs unusable.&lt;/p&gt;&#xA;" OwnerUserId="1163" LastActivityDate="2015-08-27T10:57:52.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1619" PostTypeId="2" ParentId="1612" CreationDate="2015-08-27T11:11:01.310" Score="1" Body="&lt;p&gt;Macs hasn't used BIOS for almost 10 years now, and are UEFI based.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I havn't used Unetbootin for years, but back then it didn't make the devices bootable, &lt;a href=&quot;https://bugs.launchpad.net/unetbootin/+bug/493129&quot; rel=&quot;nofollow&quot;&gt;and it seems like this is still a bug&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try find some other way to partition your USB drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only method i know that always works is dd, but i do not recommend using it because if you do not know what you are doing you can potentially erase your whole computer which is not fun at all. If you are careful at each step it should work fine though, and &lt;a href=&quot;http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-mac-osx&quot; rel=&quot;nofollow&quot;&gt;Ubuntu has a guide&lt;/a&gt; which works well. So if you use this method, be very careful at step 8.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Also, use the 64bit version. It's better optimized for your computer.&lt;/p&gt;&#xA;" OwnerUserId="93" LastActivityDate="2015-08-27T11:11:01.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1620" PostTypeId="2" ParentId="1604" CreationDate="2015-08-27T11:44:06.193" Score="5" Body="&lt;p&gt;I would check Software &amp;amp; Updates, Updates. Where it says: Notify me of new Ubuntu Version: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it set to Never? or something else? Set it to Never.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-08-27T11:44:06.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1621" PostTypeId="2" ParentId="1617" CreationDate="2015-08-27T13:05:12.680" Score="2" Body="&lt;p&gt;Try clearing &lt;code&gt;apt&lt;/code&gt; cache:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1164" LastActivityDate="2015-08-27T13:05:12.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1622" PostTypeId="2" ParentId="1616" CreationDate="2015-08-27T14:09:58.987" Score="3" Body="&lt;p&gt;Try to add the command to your &lt;code&gt;~/.profile&lt;/code&gt;-file, that should auto-execute this command everytime you log on. But I don't know if it is harmful if the command is executed while the touchpad is working.&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2015-08-27T14:09:58.987" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1624" PostTypeId="1" AcceptedAnswerId="1682" CreationDate="2015-08-27T18:55:52.790" Score="7" ViewCount="1165" Body="&lt;p&gt;Does Geary come with any contact management? I'd like to create and maintain mailing lists and contacts. Does this feature exist somewhere in Geary?&lt;/p&gt;&#xA;" OwnerUserId="1173" LastEditorUserId="45" LastEditDate="2015-08-31T16:54:48.827" LastActivityDate="2015-08-31T16:54:48.827" Title="Can I manage my contacts from inside Geary?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1625" PostTypeId="2" ParentId="1603" CreationDate="2015-08-27T18:58:57.413" Score="7" Body="&lt;p&gt;Logo changed because you use Moka icon theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If theme was installed from &lt;a href=&quot;https://launchpad.net/~moka/+archive/ubuntu/stable&quot;&gt;PPA&lt;/a&gt;, logo can be returned to default by following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.icons/Moka/48x48/places &amp;amp;&amp;amp; ln -s /usr/share/icons/elementary/places/48/distributor-logo.svg ~/.icons/Moka/48x48/places/distributor-logo.svg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-08-27T18:58:57.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1627" PostTypeId="1" CreationDate="2015-08-27T19:50:30.723" Score="1" ViewCount="54" Body="&lt;p&gt;Hi there Freya does not work but using Linux Mint my mouse wheel is available in the CP. When using FF I press and hold, and expect it to scroll page up/down according to mouse movement when held down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the wheel option to show under Elementary CP/mouse settings??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks kindly.&#xA;Alistair.&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2015-08-27T19:50:30.723" Title="Mouse wheel button not shown in CP, and non-standard behaviour if Firefox" Tags="|release-freya|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1628" PostTypeId="2" ParentId="1608" CreationDate="2015-08-27T21:04:28.707" Score="2" Body="&lt;p&gt;I have found a workaround (sound still drops out every so often)...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1- I installed &quot;Pulse Audio Device Chooser&quot; and &quot;Pulse Audio Volume Control&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2- I ran &quot;Pulse Audio Volume Control&quot; and my sound started working and has worked ever since, even after several re-boots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then followed this guide...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://www.unixmen.com/2012003-howto-resolve-nosound-problem-on-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound still drops out again if I close my laptop lid (logged out) and usually works again after reboot, so as a workaround I changed the action for when the lid is closed (from default: suspend, to ignore) by using the following...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo nano /etc/systemd/logind.conf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;find line &quot;#HandleLidSwitch=suspend&quot;&#xA;Replace line with &quot;HandleLidSwitch=ignore&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;finaly, restart service:&#xA;sudo restart systemd-logind&lt;/p&gt;&#xA;" OwnerUserId="1156" LastEditorUserId="1156" LastEditDate="2015-10-24T10:39:58.610" LastActivityDate="2015-10-24T10:39:58.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1631" PostTypeId="1" CreationDate="2015-08-28T01:18:06.740" Score="9" ViewCount="4397" Body="&lt;p&gt;My PC has dual boot Mint (Debian used for several years) and Elementary.&#xA;Elementary suspends fine, but unlike Mint, on resume the HD spins up but screen remains blank. I have to use the Power button to force shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an aside, when using Firefox, and menu/deskcut, there is no deskcut placed in the desktop folder??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks vm for any help.&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2016-10-28T02:02:51.573" Title="Suspend not resuming" Tags="|suspend|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1632" PostTypeId="1" AcceptedAnswerId="1695" CreationDate="2015-08-28T02:25:45.230" Score="2" ViewCount="393" Body="&lt;p&gt;I recently just installed freya..and my logitech USB headphones seem to not work. I saw other people suggest unmuting them in alsamixer, I did that, but that did not fix anything. My speakers work just fine, does anyone have any ideas?&lt;/p&gt;&#xA;" OwnerUserId="1175" LastEditorUserId="1175" LastEditDate="2015-09-01T16:56:05.127" LastActivityDate="2015-09-01T16:56:05.127" Title="USB Headphones not working" Tags="|release-freya|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1633" PostTypeId="1" CreationDate="2015-08-28T04:39:05.490" Score="0" ViewCount="375" Body="&lt;p&gt;I have a MacBook 2008 that used to run OS X beautifully. But then it stopped working correctly, it wouldn't always boot. When it does it is always super slow, or you get the rainbow wheel of death for hours. I have put elementary OS on it before and it ran very well! But his time it seems to run just like OSX does. So is this a software issue or a hardware issue. If hardware how do I fix it?&lt;/p&gt;&#xA;" OwnerUserId="1176" LastEditorUserId="1176" LastEditDate="2015-08-28T04:53:13.230" LastActivityDate="2015-09-01T03:56:14.090" Title="What is wrong with my Mac?" Tags="|hardware|uefi|macbook|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1634" PostTypeId="1" AcceptedAnswerId="1654" CreationDate="2015-08-28T09:17:23.650" Score="5" ViewCount="1685" Body="&lt;p&gt;Whenever I try to update the software using Software Updater, I get this dialog:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DppOi.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DppOi.png&quot; alt=&quot;dialog showing the warning message&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which prevents me from getting the upgrade - and going through &lt;code&gt;apt-get upgrade&lt;/code&gt; results in partially upgraded sotware. Also, I've done the cleaning suggested in the last sentence. It still shows up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only left thing to try is dealing with &lt;code&gt;/boot&lt;/code&gt;, but I do not know what can be deleted and what has to be untouched.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/udB5c.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/udB5c.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which is the best, &quot;elementary-backed&quot; solution to the problem?&lt;/p&gt;&#xA;" OwnerDisplayName="user968" LastEditorDisplayName="user968" LastEditDate="2015-08-28T09:48:54.547" LastActivityDate="2015-08-29T17:15:22.723" Title="&quot;Not enough free disk space&quot; dialog showed on Software Updater" Tags="|software-installation|updates|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1635" PostTypeId="2" ParentId="1593" CreationDate="2015-08-28T11:45:44.303" Score="3" Body="&lt;p&gt;Although I did install xbindkeys, I did not install xautomation, which allowed me to automate and assign key combinations like &lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;tab&lt;/kbd&gt;. For a detailed explanation, you can follow the &lt;a href=&quot;https://askubuntu.com/questions/19569/how-can-i-assign-actions-to-all-my-mouse-buttons/308969#308969&quot;&gt;link&lt;/a&gt; posted by mazienho which gives a good example how xbindkeys and xautomation are working together. In order to achieve what I was looking for, I added the following lines to my .xbindkeysrc file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;xte 'keydown Alt_L' 'key Tab' 'keyup Alt_L'&quot;  &#xA;b:8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="474" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-08-28T11:59:24.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1636" PostTypeId="2" ParentId="1631" CreationDate="2015-08-28T11:55:08.663" Score="3" Body="&lt;p&gt;If you are using nVidia graphics, check if you are using the proprietary drivers and if not, enable them. To do that open Slingshot, type in &quot;Additional Drivers&quot; and select it from the opening dialog.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If your laptop has an nVidia graphics card, it may be the open source&#xA;  graphics driver causing the problem. The open source graphics driver&#xA;  has some power management issues on some laptops. Try switching to&#xA;  the closed source drivers with the Hardware drivers tool from the&#xA;  menu:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/14381/413066&quot;&gt;Answer to: &quot;Laptop does not wake up after sleep&quot;&lt;/a&gt; by StackExchange user &lt;a href=&quot;https://askubuntu.com/users/359/jr0cket&quot;&gt;jr0cket&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2015-08-28T15:54:04.977" LastActivityDate="2015-08-28T15:54:04.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1637" PostTypeId="2" ParentId="1633" CreationDate="2015-08-28T13:16:56.167" Score="1" Body="&lt;p&gt;I would suggest testing your RAM and hard drive for errors. I'm not sure if this will work since you have already loaded elementary, but you could try to run the apple hardware test described in this article &lt;a href=&quot;http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tests-on-your-mac/&quot; rel=&quot;nofollow&quot;&gt;http://www.macissues.com/2014/03/21/how-to-run-and-interpret-apples-hardware-tests-on-your-mac/&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;To invoke the hardware tests, insert the restore DVD that came with&#xA;  your system. If your system is new enough that it did not come with a&#xA;  DVD drive, then skip this step. Now perform the following actions:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Reboot your Mac&lt;/li&gt;&#xA;  &lt;li&gt;Hold the “D” key down immediately when you hear the&#xA;  boot chimes&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-08-28T13:16:56.167" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1638" PostTypeId="1" AcceptedAnswerId="1639" CreationDate="2015-08-28T21:06:30.147" Score="17" ViewCount="5222" Body="&lt;p&gt;The action area buttons have gone missing from my file chooser dialog. I am unable to take action or close the dialog. How can I get the buttons back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MxKF4.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MxKF4.png&quot; alt=&quot;Missing Buttons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-05T20:11:06.770" LastActivityDate="2017-11-27T19:11:00.763" Title="Buttons are missing in the file chooser dialog. What should I do?" Tags="|pantheon-files|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1639" PostTypeId="2" ParentId="1638" CreationDate="2015-08-28T21:06:30.147" Score="28" Body="&lt;p&gt;This seems to be an issue with a Gtk setting being changed somehow. There is a setting to make dialogs use buttons up top in the headerbar instead of down below. This is useful in other environments like GNOME, but it breaks dialogs in elementary OS as you can see here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to create an xsettings override that will set the value to false (its default value). This is easier than it seems and can be done with the following command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command uses &lt;code&gt;gsettings&lt;/code&gt; to add &lt;code&gt;'Gtk/DialogsUseHeader':&amp;lt;0&amp;gt;&lt;/code&gt; (the &quot;0&quot; represents &quot;false&quot;) to your list of xsettings overrides. If you already have other overrides set up, make sure you modify the command so that those are not overwritten.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-09-13T18:54:34.060" LastActivityDate="2016-09-13T18:54:34.060" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1640" PostTypeId="2" ParentId="1442" CreationDate="2015-08-28T23:16:43.383" Score="26" Body="&lt;p&gt;In a nutshell, no. You can check the &lt;a href=&quot;https://elementary.io/privacy&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary Privacy statement on the website&lt;/a&gt;, which says:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Your data always belongs to you, and only you. We don’t make advertising deals or collect sensitive personal data. We’re funded directly by our users paying what they want for elementary OS and apps on AppCenter. And that’s how it should be.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;And specifically about the OS:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;We do not collect any data from elementary OS. Your files, settings, and all other personal data remain on-device unless you explicitly share them with a third-party app or service.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h1&gt;Privacy Mode&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The &lt;strong&gt;Privacy Mode&lt;/strong&gt; setting under &lt;strong&gt;System Settings&lt;/strong&gt; &gt; &lt;strong&gt;Security &amp;amp; Privacy&lt;/strong&gt; &gt; &lt;strong&gt;Privacy&lt;/strong&gt; is related to local data. There is no data sent online or to elementary. elementary doesn’t collect usage stats through the OS or anything. Privacy mode and the other privacy settings control an OS component called Zeitgeist, which is an open source library that powers local things like the &quot;recent documents&quot; in the Files app or the order of search results in the app launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qq4jV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qq4jV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turning Privacy Mode &lt;strong&gt;on&lt;/strong&gt; means that the OS will not keep track of usage, making search results less relevant and &quot;recent&quot; type views useless. This protects your privacy from other physical users of your account and is similar to &quot;Private Browsing&quot; or &quot;Incognito Mode&quot; in a web browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Leaving Privacy Mode &lt;strong&gt;off&lt;/strong&gt; (which is the default) means the OS will collect usage stats for local use only. The app launcher's search will get more accurate as you use it, the Files app will be able to show a list of recently-accessed files, etc.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Amazon Web Search&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;elementary OS does not use Ubuntu's Unity or any related code, like the Amazon Web Search. Further, nothing typed into the app launcher's search is sent to elementary or any other third-party. This is true whether Privacy mode is enabled or disabled. It's all kept local.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;elementary.io Website&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The only sort of data collection elementary does is when visitors are on the website itself (Google Analytics and a simple download counter), and the analytics respects Do-Not-Track. You can see the website's &lt;a href=&quot;https://elementary.io/privacy-policy&quot; rel=&quot;nofollow noreferrer&quot;&gt;privacy policy&lt;/a&gt; for more details on this.&lt;/p&gt;&#xA;" OwnerUserId="308" LastEditorUserId="308" LastEditDate="2019-12-06T06:21:30.880" LastActivityDate="2019-12-06T06:21:30.880" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="1641" PostTypeId="2" ParentId="1633" CreationDate="2015-08-28T23:17:04.327" Score="2" Body="&lt;p&gt;On a 2008 MacBook Pro I would suspect a failing hard drive, or at least multiple bad blocks. The 2008 should have come with a bootable DVD. You can boot from that and run Disk Utility to check the hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An SSD is a very worthwhile upgrade, as well as additional memory. I would consider these upgrades, even if the drive tests OK.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-08-28T23:17:04.327" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1642" PostTypeId="2" ParentId="1588" CreationDate="2015-08-29T00:17:50.550" Score="1" Body="&lt;p&gt;Ok, so I don't know how but the window-state in org.pantheon.terminal.saved-state was &quot;full-screen&quot; instead of &quot;Normal&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used dconf-editor to change it back to &quot;Normal&quot; and now the terminal show the header.&lt;/p&gt;&#xA;" OwnerUserId="208" LastActivityDate="2015-08-29T00:17:50.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1644" PostTypeId="1" CreationDate="2015-08-29T03:47:36.020" Score="3" ViewCount="8252" Body="&lt;p&gt;I want to install elementary OS, but I want to use the Windows boot manager to select which OS I want to boot into. Could you tell me the steps needed to make this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="1182" LastEditorUserId="138" LastEditDate="2015-08-29T16:29:18.837" LastActivityDate="2015-09-28T16:51:52.957" Title="Dual boot Windows 10 and elementary OS using Windows' boot manager" Tags="|release-freya|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1645" PostTypeId="1" AcceptedAnswerId="1649" CreationDate="2015-08-29T08:47:16.687" Score="1" ViewCount="615" Body="&lt;p&gt;I recently switched to a new videocard, but now I'm getting a black screen whenever I boot to elementary OS. I do see a splash screen before it goes black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can this be resolved?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help with removing the old drivers, installing the new ones or tools for debugging this issue would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I booted again and I saw an error this time:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*ERROR* No UMS support in radeon module&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1184" LastEditorUserId="3757" LastEditDate="2016-04-23T12:57:06.047" LastActivityDate="2020-12-30T18:52:39.493" Title="Black screen after switching from NVIDIA to AMD videocard" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1647" PostTypeId="2" ParentId="1612" CreationDate="2015-08-29T11:45:23.687" Score="0" Body="&lt;p&gt;I have installed elementary OS Freya on a really old Macbook Pro (late 2006), but I had the same problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I eventually installed rEFInd to be able to dual boot elementary OS and Mac OS X and realized that USB sticks won't boot anything unless is a really recent Macbook, so you have to burn a DVD with the ISO file, manually partition the hard disk through Mac OS X's Disk Utility, reboot into rEFInd (which is done automatically as you install it) and finally select the DVD and install elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This guide (which I personally followed) is more detailed: &lt;a href=&quot;http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware&quot; rel=&quot;nofollow&quot;&gt;http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1186" LastEditorUserId="34" LastEditDate="2015-09-03T22:22:53.477" LastActivityDate="2015-09-03T22:22:53.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1648" PostTypeId="2" ParentId="1606" CreationDate="2015-08-29T12:02:27.857" Score="0" Body="&lt;p&gt;I use elementary OS and Windows 8.1 to Go (now 10 to Go) for 2 years with an external SSD drive and it work like a charm !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Windows To Go can continue working event after an USB disconnection in opposite of Linux systems which necessarily interrupts the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, if you leave the USB plugged into your computer, you can use your system with really great performances (120 Mo/s write - 180 Mo/s read).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW, i use this external SSD on 3 different computer. elementary OS, for development and Windows for gaming and different hobbies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link to my blog (in french :/) : &lt;a href=&quot;https://www.florian-lacrampe.me/2015/01/09/windows-to-go-8-1-et-ubuntu-14-10-sur-un-ssd-portable-usb/&quot; rel=&quot;nofollow&quot;&gt;https://www.florian-lacrampe.me/2015/01/09/windows-to-go-8-1-et-ubuntu-14-10-sur-un-ssd-portable-usb/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a nice day !&lt;/p&gt;&#xA;" OwnerUserId="1185" LastEditorUserId="34" LastEditDate="2015-08-29T14:49:56.093" LastActivityDate="2015-08-29T14:49:56.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1649" PostTypeId="2" ParentId="1645" CreationDate="2015-08-29T12:24:10.230" Score="1" Body="&lt;p&gt;You can boot on your system by select &amp;quot;RecoveryMode&amp;quot; on &amp;quot;Advanced option for elementaryos&amp;quot; inside GRUB 2.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pUJW0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pUJW0.jpg&quot; alt=&quot;Ubuntu advanced boot&quot; /&gt;&lt;/a&gt;&lt;br /&gt;&#xA;&lt;sub&gt;(source: &lt;a href=&quot;https://cdn.instructables.com/F52/JUNA/HET0RS1T/F52JUNAHET0RS1T.LARGE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructables.com&lt;/a&gt;)&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;p&gt;Next, use failsafe X to use CLI only mode&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zb2XA.png&quot; alt=&quot;Failsafe X&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then, install fglrx package.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt-get update&#xA;apt-get install fglrx&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;fglrx install ATI catalyst. Normally it remove nvidia drivers by using DKMS. Fingers crossed !&lt;/p&gt;&#xA;&lt;p&gt;Finally, you can test your system !&lt;/p&gt;&#xA;&lt;p&gt;Good luck ;)&lt;/p&gt;&#xA;" OwnerUserId="1185" LastEditorUserId="8517" LastEditDate="2020-12-30T18:52:39.493" LastActivityDate="2020-12-30T18:52:39.493" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="1651" PostTypeId="1" CreationDate="2015-08-29T15:31:50.133" Score="1" ViewCount="119" Body="&lt;p&gt;I am using a ThinkPad X230 with an integrated Intel graphics card which should usually be well-supported by Linux and elementary OS. Nevertheless, I am running into the issue that occasionally the ThinkPad is not properly resuming from suspend. It then shows the following characteristics:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the display remains black&lt;/li&gt;&#xA;&lt;li&gt;the light of the power button keeps blinking&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Has anyone experienced a similar problem and found a solution or workaround to prevent the laptop from not properly resuming?&lt;/p&gt;&#xA;" OwnerUserId="147" LastEditorUserId="3757" LastEditDate="2016-04-25T07:44:42.693" LastActivityDate="2016-04-25T07:44:42.693" Title="How to prevent laptop from not restarting properly on resume from suspend?" Tags="|suspend|laptop|thinkpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1652" PostTypeId="2" ParentId="1633" CreationDate="2015-08-29T16:10:35.520" Score="1" Body="&lt;p&gt;Well, if the same thing happens on both elementary OS and OS X then I'm more than sure that this is a hardware bug. The chances that you're going to encounter the same error on two different software platforms are &lt;em&gt;very&lt;/em&gt; small.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-08-29T16:10:35.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1653" PostTypeId="2" ParentId="1644" CreationDate="2015-08-29T16:18:15.843" Score="1" Body="&lt;p&gt;Judging by &lt;a href=&quot;https://askubuntu.com/questions/62440/is-it-possible-to-boot-ubuntu-using-the-windows-bootloader&quot;&gt;this AskUbuntu question&lt;/a&gt; it could be done (&lt;strong&gt;disclaimer&lt;/strong&gt;: I haven't tested this):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Assuming that Windows is already installed, install elementary OS on another partition. Make sure that you install Grub2 on the elementary OS  partition - don't install it on the MBR since this will overwrite the Windows boot-loader.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot into Windows and install &lt;a href=&quot;http://neosmart.net/dl.php?id=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;EasyBCD&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add Entry and choose Grub2 i.e.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7gC26.jpg&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then write back the modified Windows Boot-loader i.e.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/UTGBB.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot - you will now have two options (except it'll say whatever you want it to say instead of Ubunutu):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uCed1.jpg&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot into elementary OS and change the Grub Timeout value i.e.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gksudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change &lt;code&gt;GRUB_TIMEOUT=10&lt;/code&gt; to &lt;code&gt;GRUB_TIMEOUT=0&lt;/code&gt; and save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that this won't turn off Grub, it'll just make it appear for 0 seconds, so you won't be able to see it.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-08-29T16:18:15.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1654" PostTypeId="2" ParentId="1634" CreationDate="2015-08-29T17:15:22.723" Score="0" Body="&lt;p&gt;One way to safely free space in the &lt;code&gt;/boot&lt;/code&gt; folder that works for every derivative of Ubuntu is the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the Terminal application and type &lt;code&gt;uname -r&lt;/code&gt; to get the current version of the kernel used by your system.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Get a list of all the installed kernel by typing &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/^ii/{ print $2}' | grep -v -e &lt;code&gt;uname -r | cut -f1,2 -d&quot;-&quot;&lt;/code&gt; | grep -e '[0-9]'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For ones who'd like to know how that works&lt;/em&gt;. There's a similar answer &lt;a href=&quot;https://askubuntu.com/a/259092/270523&quot;&gt;on AskUbuntu&lt;/a&gt; from which I've taken the information; kudos to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/320/kultom&quot;&gt;Kultom&lt;/a&gt;, who linked it in a comment.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Once you've checked that your current version of the kernel doesn't appear in the list, merge the previous command with &lt;code&gt;sudo apt-get -y purge&lt;/code&gt; to remove all the old kernels. Thus, you will finally have to type&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/^ii/{ print $2}' | grep -v -e &lt;code&gt;uname -r | cut -f1,2 -d&quot;-&quot;&lt;/code&gt; | grep -e '[0-9]' | xargs sudo apt-get -y purge&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked well for me and many users gave positive feedback on this procedure. It is not strictly &quot;elementary-backed&quot;, but it works.&lt;/p&gt;&#xA;" OwnerDisplayName="user968" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-08-29T17:15:22.723" CommentCount="0" CommunityOwnedDate="2015-08-29T17:15:22.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="1655" PostTypeId="1" CreationDate="2015-08-29T17:21:19.230" Score="1" ViewCount="46" Body="&lt;p&gt;I've tried everything, checked displays section, checked nvidia driver panel and can't fix it. If I switch to xorg driver it detects both monitors and works well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;xrandr&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384&#xA;DVI-I-0 disconnected (normal left inverted right x axis y axis)&#xA;DVI-I-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm&#xA;   1920x1080      60.0*+&#xA;   1680x1050      60.0  &#xA;   1440x900       59.9  &#xA;   1280x1024      75.0     60.0  &#xA;   1280x960       60.0  &#xA;   1280x800       59.8  &#xA;   1280x720       60.0  &#xA;   1152x864       75.0  &#xA;   1024x768       75.0     70.1     60.0  &#xA;   800x600        75.0     72.2     60.3     56.2  &#xA;   640x480        75.0     59.9  &#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;DP-0 disconnected (normal left inverted right x axis y axis)&#xA;DVI-D-0 disconnected (normal left inverted right x axis y axis)&#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1189" LastEditorUserId="3757" LastEditDate="2016-04-25T07:44:12.753" LastActivityDate="2016-04-25T07:44:12.753" Title="Switching to nvidia driver 346.82 makes my 2nd monitor to not work" Tags="|graphic-drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1656" PostTypeId="2" ParentId="1613" CreationDate="2015-08-29T17:55:36.387" Score="-2" Body="&lt;p&gt;I am not sure, but it might help if you uninstall Geary completely, or purge it. Of course you cannot use Geary any longer, but if you want to use Thunderbird as your default mail app, it's not of any use!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By uninstalling Geary elementary OS is forced to use Thunderbird as its default (ONLY!) mail app.&lt;/p&gt;&#xA;" OwnerUserId="1026" LastEditorUserId="34" LastEditDate="2015-09-02T22:30:33.993" LastActivityDate="2015-09-02T22:30:33.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1657" PostTypeId="1" CreationDate="2015-08-29T18:04:17.923" Score="1" ViewCount="70" Body="&lt;p&gt;Just tried twice installing elementary OS via a usb stick. After install it restarts but gets back to the install prompt ie it still boots from the stick. I reboot and go to the BIOS to revert back the sequence to having the HD first and remove the stick. On reboot it goes to a blank screen with a blinking cursor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pardon the newbie question. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a Samsung rv511, i3. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using elementary OS via the stick to test it out was fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="1191" LastEditorUserId="3757" LastEditDate="2016-05-07T04:18:18.407" LastActivityDate="2016-05-07T04:18:18.407" Title="elementary OS won't boot after install" Tags="|system-installation|boot|" AnswerCount="0" CommentCount="2" ClosedDate="2015-09-16T10:23:15.190" ContentLicense="CC BY-SA 3.0" />
  <row Id="1658" PostTypeId="2" ParentId="1613" CreationDate="2015-08-29T18:22:40.950" Score="2" Body="&lt;p&gt;The &quot;Send by email&quot; function in Files only works with Geary. Thunderbird doesn't provide this integration feature.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-08-29T18:22:40.950" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1659" PostTypeId="1" CreationDate="2015-08-29T19:03:06.560" Score="1" ViewCount="1614" Body="&lt;p&gt;I get an error when I try to open dropbox or sopcast-player:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Starting Dropbox...Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Attempt to unlock mutex that was not locked&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried all in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/697/how-can-i-test-the-new-open-file-dialog/700#700&quot;&gt;this&lt;/a&gt; topic, but still get the error.&#xA;I tried also to update gtk to version 3. &#xA;My OS is updated to the newest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to solve this issue? &lt;/p&gt;&#xA;" OwnerUserId="1192" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-07-05T06:47:22.620" Title="Get an error on running sopcast or dropbox related to patheon-filechooser-module" Tags="|gtk|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1660" PostTypeId="1" CreationDate="2015-08-29T19:26:15.360" Score="3" ViewCount="2112" Body="&lt;p&gt;I have a laptop with elementary OS Freya. I also have a desktop PC with Windows 10. My desktop PC is situated at my workplace, and sometimes I need to continue work after office closing time on my laptop when I get home. I used to just email work back and forth between my office and personal email address to continue work, but this is becoming tedious. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideally, I would like to be able to share the entirety of the 'home' directory (pictures, downloads, documents, everything) with this Windows PC. I would like it so that I can update a document on my laptop and can then immediately access it the next day at work, and, when I've finished with it at the end of the working day, the updated version is on my laptop. I have read about something called SSH, but didn't understand. If there is a way to do this, a step-by-step guide for a beginner to Linux would be very much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="663" LastEditorUserId="308" LastEditDate="2015-08-30T21:25:13.820" LastActivityDate="2015-08-30T21:25:13.820" Title="How can I share my home folder between an elementary OS laptop and Windows 10 desktop?" Tags="|release-freya|microsoft-windows|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1661" PostTypeId="1" CreationDate="2015-08-30T00:13:54.313" Score="1" ViewCount="671" Body="&lt;p&gt;I just played around with Numix Theme and rebooted my machine. Now the login screen is incomplete. Is that a known problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to reinstall the login screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Terminal History:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    1  nano /etc/apt/sources.list&#xA;    2  sudo nano /etc/apt/sources.list&#xA;    3  cd /home/brace/Downloads/&#xA;    4  chmod 777 JD2Setup_x64.sh &#xA;    5  ./JD2Setup_x64.sh &#xA;    6  java -version &#xA;    7  gsettings set org.gnome.settings-daemon.plugins.cursor active false&#xA;    8  cp Downloads/jdk1.8.0_60/ /o&#xA;    9  mkdir /opt/Oracle_Java&#xA;   10  sudomkdir /opt/Oracle_Java&#xA;   11  sudo mkdir /opt/Oracle_Java&#xA;   12  su -s&#xA;   13  sudo -s&#xA;   14  cp Downloads/jdk1.8.0_60/ /opt/Oracle_Java/&#xA;   15  sudo cp Downloads/jdk1.8.0_60/ /opt/Oracle_Java/&#xA;   16  cd /opt/Oracle_Java/&#xA;   17  ls&#xA;   18  sudo cp Downloads/jdk1.8.0_60/ /opt/Oracle_Java/jdk1.8.0_60&#xA;   19  sudo cp Downloads/jdk1.8.0_60/ /opt/Oracle_Java&#xA;   20  cd&#xA;   21  sudo cp Downloads/jdk1.8.0_60/ /opt/Oracle_Java&#xA;   22  sudo cp -r Downloads/jdk1.8.0_60/ /opt/Oracle_Java&#xA;   23  sudo update-alternatives --install &quot;/usr/bin/java&quot; &quot;java&quot; &quot;/opt/Oracle_Java/jre1.8.0_60/bin/java&quot; 1&#xA;   24  sudo update-alternatives --install &quot;/usr/bin/java&quot; &quot;java&quot; &quot;/opt/Oracle_Java/jde1.8.0_60/bin/java&quot; 1&#xA;   25  sudo update-alternatives --install &quot;/usr/bin/java&quot; &quot;java&quot; &quot;/opt/Oracle_Java/jdk1.8.0_60/bin/java&quot; 1&#xA;   26  sudo update-alternatives --install &quot;/usr/bin/javaws&quot; &quot;javaws&quot; &quot;/opt/Oracle_Java/jdk1.8.0_60/bin/javaws&quot; 1&#xA;   27  sudo update-alternatives --install &quot;/usr/bin/javac&quot; &quot;javac&quot; &quot;/opt/Oracle_Java/jdk1.8.0_60/bin/javac&quot; 1&#xA;   28  sudo update-alternatives --install &quot;/usr/bin/jar&quot; &quot;jar&quot; &quot;/opt/Oracle_Java/jdk1.8.0_60/bin/jar&quot; 1 &#xA;   29  sudo update-alternatives --install &quot;/usr/bin/javac&quot; &quot;javac&quot; &quot;/opt/Oracle_Java/jdk1.8.0_60/bin/javac&quot; 1&#xA;   30  sudo cp -r Downloads/jre1.8.0_60/ /opt/Oracle_Java&#xA;   31  sudo update-alternatives --install &quot;/usr/bin/java&quot; &quot;java&quot; &quot;/opt/Oracle_Java/jre1.8.0_60/bin/java&quot; 1&#xA;   32  sudo update-alternatives --install &quot;/usr/bin/javaws&quot; &quot;javaws&quot; &quot;/opt/Oracle_Java/jre1.8.0_60/bin/javaws&quot; 1&#xA;   33  lshw&#xA;   34  sudo apt-get install linux-headers-$(uname -r)&#xA;   35  sudo -s 'apt-get update &amp;amp;&amp;amp; apt-get install xserver-xorg-input-wacom'&#xA;   36  sudo apt-get update saapt-get install xserver-xorg-input-wacom'&#xA;   37  apt-get install xserver-xorg-input-wacom&#xA;   38  sudo apt-get install xserver-xorg-input-wacom&#xA;   39  sudo apt-get install xserver-xorg-core&#xA;   40  sudo apt-get install xorg-input-abi-20&#xA;   41  sudo apt-get install xserver-xorg-core&#xA;   42  apt-get autoremove&#xA;   43  sudo apt-get autoremove&#xA;   44  sudo apt-get install xserver-xorg-core&#xA;   45  sudo apt-get autoremove&#xA;   46  sudo apt-get build-dep libwacom&#xA;   47  kill -9 `pidof rapidsvn`&#xA;   48  kill -9 'pidof rapidsvn'&#xA;   49  sudo kill -9 'pidof rapidsvn'&#xA;   50  sudo gsettings set org.gnome.settings-daemon.plugins.cursor active false&#xA;   51  sudo add-apt-repository ppa:nrbrtx/sysvinit-backlight&#xA;   52  apt-get update&#xA;   53  sudo apt-get update&#xA;   54  sudo apt-get install sysvinit-backlight&#xA;   55  wget -O xt  http://git.io/v3Dlb &amp;amp;&amp;amp; chmod +x xt &amp;amp;&amp;amp; ./xt &amp;amp;&amp;amp; rm xt&#xA;   56  has&#xA;   57  sudo add-apt-repository ppa:moka/stable&#xA;   58  sudo apt-get update&#xA;   59  sudo apt-get install moka-icon-theme&#xA;   60  sudo apt-get install &#xA;   61  sudo apt-get install numix-gtk-theme&#xA;   62  sudo add-apt-repository ppa:numix/ppau&#xA;   63  sudo apt-get install numix-gtk-theme&#xA;   64  sudo apt-get update&#xA;   65  sudo apt-get install numix-gtk-theme &#xA;   66  sudo apt-get remove numix-utouch-icon-theme&#xA;   67  sudo apt-get install numix-icon-theme numix-icon-theme-utouch&#xA;   68  sudo apt-get install numix-icon-theme numix-icon-theme-circle &#xA;   69  sudo apt-get install numix-icon-theme-bevel &#xA;   70  sudo apt-get install numix-plank-theme&#xA;   71  sudo apt-get install unity-tweak-tool&#xA;   72  sudo apt-get remove unity-tweak-tool&#xA;   73  sudo apt-get remove numix-plank-theme&#xA;   74  sudo apt-get remove numix-icon-theme-bevel &#xA;   75  sudo apt-get purge unity-tweak-tool&#xA;   76  startx&#xA;   77  reboot&#xA;   78  sudo rebooz&#xA;   79  sudo reboot&#xA;   80  sudo apt-get install imagemagick&#xA;   81  echo 'DISPLAY=:0 XAUTHORITY=/var/lib/gdm/:0.Xauth xwd -root' &amp;gt;/tmp/shot.sh&#xA;   82  sudo bash /tmp/shot.sh &amp;gt;/tmp/shot.xwd&#xA;   83  unity-greeter --test-mode&#xA;   84  ls&#xA;   85  sudo apt-get install compizconfig-settings-manager&#xA;   86  DISPLAY=:0 ccsm&#xA;   87  sudo systemctl restart lightdm&#xA;   88  sudo systemctl restart lightdm#&#xA;   89  sudo apt-get install systemctl&#xA;   90  sudo systemctl restart lightdm#&#xA;   91  sudo systemctrl restart lightdm&#xA;   92  sudo apt-get install elementary-icon-theme&#xA;   93  sudo apt-get install --reinstall pantheon-greeter&#xA;   94  gsettings set org.gnome.desktop.interface gtk-theme &quot;elementary&quot;&#xA;   95  gsettings set org.gnome.desktop.wm.preferences theme &quot;elementary&quot;&#xA;   96  sudo apt-get install unity-tweak-tool&#xA;   97  history &amp;gt; history_for_print.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fc24v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fc24v.png&quot; alt=&quot;Login-Greeter&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1193" LastEditorUserId="1193" LastEditDate="2015-08-30T08:32:55.727" LastActivityDate="2015-09-29T08:58:03.003" Title="Login screen incomplete" Tags="|greeter|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-29T17:13:56.533" ContentLicense="CC BY-SA 3.0" />
  <row Id="1662" PostTypeId="2" ParentId="1661" CreationDate="2015-08-30T00:29:15.970" Score="0" Body="&lt;p&gt;You can easily install programs, including &lt;code&gt;pantheon-greeter&lt;/code&gt; from terminal by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am not sure if this will help here, therefore I would also suggest setting the GTK (and legacy Metacity) theme back to elementary:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface gtk-theme &quot;elementary&quot;&#xA;gsettings set org.gnome.desktop.wm.preferences theme &quot;elementary&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are unable to login you can switch to a &quot;tty&quot; command line by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; would take you back). Login there with your username and password, execute the above commands and reboot with &lt;code&gt;sudo shutdown -r now&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-08-30T00:29:15.970" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1663" PostTypeId="2" ParentId="1660" CreationDate="2015-08-30T01:47:58.607" Score="0" Body="&lt;p&gt;The easiest way would be to use Dropbox, Copy, Google Drive or some other cloud service.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-08-30T01:47:58.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1664" PostTypeId="1" AcceptedAnswerId="1693" CreationDate="2015-08-30T07:33:47.227" Score="11" ViewCount="971" Body="&lt;p&gt;I'd like to change the first day of week on the little calendar that shows up at the wingpanel. At the current state it shows Sunday as the first day of the week, but I'd like it to be Monday. How can I change this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="370" LastActivityDate="2015-08-31T23:11:29.787" Title="How to change the first day of week on wingpanel calendar?" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1665" PostTypeId="2" ParentId="1613" CreationDate="2015-08-30T09:10:03.423" Score="6" Body="&lt;p&gt;You can add this functionality by installing the &lt;code&gt;thunderbird-contracts&lt;/code&gt; package. Unfortunately it's only available in the elementary OS daily PPA. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;It's not recommended to add the daily PPA to your sources, since it contains unstable versions of several system components and may break your system!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the desired package and install it manually:&lt;br&gt;&#xA;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily/+files/thunderbird-contracts_0.1%7Er17-0%7Eubuntu14.04.1_all.deb&quot; rel=&quot;noreferrer&quot;&gt;thunderbird-contracts (0.1~r17-0~ubuntu14.04.1)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall Geary to remove the other &quot;Send by e-mail&quot; entry in your context menu.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-08-30T09:10:03.423" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1668" PostTypeId="1" CreationDate="2015-08-30T12:02:17.930" Score="0" ViewCount="898" Body="&lt;p&gt;Is it possibly to run it directly from a CD, without installing it completely. I really want to give it a try before installing it definitely.&lt;/p&gt;&#xA;" OwnerUserId="1199" LastEditorUserId="242" LastEditDate="2015-08-30T20:39:25.340" LastActivityDate="2015-08-30T21:10:26.523" Title="How do I try a Live System/Live CD before installing?" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1670" PostTypeId="2" ParentId="1660" CreationDate="2015-08-30T13:35:40.633" Score="1" Body="&lt;p&gt;You have two options:&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;1. Using a cloud-based solution&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Sync your &lt;code&gt;/home&lt;/code&gt; partition to some cloud service and use it on both of your computers.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;2. Remotely control your elementary OS&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;This works only if your home device is turned on all of the time and if you know the IP address of it (note: it probably changes. Basically, what you're going to need is SSH (if you're good with terminal), VNC client, TeamViewer or whatever. TeamViewer might be the easiest to use because it's a well-known brand that supports Linux perfectly, with VNC clients right behind it. SSH is suitable for those who are comfortable with using the terminal since it offers no graphical interface.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-08-30T13:35:40.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1672" PostTypeId="1" CreationDate="2015-08-30T15:47:12.313" Score="2" ViewCount="2611" Body="&lt;p&gt;The webcam is simply not recognized by the OS. The Camera app doesn't recognize it, Skype won't find it etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using a MacBook Pro 2,2 (it's old) and the Software Center won't find any driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any tip? I have to buy an external one?&lt;/p&gt;&#xA;" OwnerUserId="1186" LastEditorUserId="4185" LastEditDate="2016-07-01T13:06:39.163" LastActivityDate="2016-09-02T15:50:19.157" Title="MacBook's webcam is not working" Tags="|applications|macbook|skype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1674" PostTypeId="1" CreationDate="2015-08-30T16:21:11.107" Score="1" ViewCount="575" Body="&lt;p&gt;I'm using a Dell Latitude E6430, which is connected to a docking station. I have connected 2 monitors to the docking station and have a problem. When I I install elementary OS, one monitor (connected via DVI) turns off (this happens using Xorg drivers). When I use Nvidia drivers, all monitors are on, but there's another problem. When I try to move the cursor to a secondary monitor there's a duplicated image.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I start elementary from Live CD, all screens are displayed correctly, only the monitor connected via DVI is laggy or freezy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me, I'm a new user of Linux and have tried to search for solutions but haven't found anything.&lt;/p&gt;&#xA;" OwnerUserId="1203" LastEditorUserId="229" LastEditDate="2015-10-17T03:20:41.723" LastActivityDate="2015-10-17T03:20:41.723" Title="Problem with graphics" Tags="|release-freya|settings|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1677" PostTypeId="1" AcceptedAnswerId="1679" CreationDate="2015-08-30T18:22:40.443" Score="-1" ViewCount="4065" Body="&lt;p&gt;I have been trying for hours to get the Universal Access Zoom In/Out feature to work. I have used several different key combinations but it just wouldn't work. I got the zoom in to work with &lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;; however the zoom out key would not work and after rebooting it stopped working altogether. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would really love to give this OS ago and use it long term so would very much appreciate if someone can advise me on how to fix it.&lt;/p&gt;&#xA;" OwnerUserId="1205" LastEditorUserId="308" LastEditDate="2015-08-30T23:37:17.583" LastActivityDate="2015-08-30T23:37:17.583" Title="Universal Access Zoom In/Out" Tags="|keyboard-shortcuts|mouse|window-management|accessibility|" AnswerCount="1" CommentCount="4" ClosedDate="2015-08-31T16:18:51.823" ContentLicense="CC BY-SA 3.0" />
  <row Id="1678" PostTypeId="1" CreationDate="2015-08-30T20:30:45.730" Score="1" ViewCount="353" Body="&lt;p&gt;I have a magic mouse that came with my iMac and I've been having issues with it on elementary OS. The greatest problem is that it disconnects way too often. My mouse also moves way too fast, even at the slowest speed it's uncomfortably slow. None of these problems are an issue on Mac OS X. I've dual booted so there is no hardware differences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even though I don't think it's necessary:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;iMac (21.5-inch, Mid 2011)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor 2.5 GHz Intel Core i5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Graphics AMD Radeon HD 6750M 512 MB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Memory 4 GB 1333 MHz DDR3&lt;/p&gt;&#xA;" OwnerUserId="667" LastEditorUserId="667" LastEditDate="2015-08-30T20:36:12.317" LastActivityDate="2015-09-01T13:18:20.903" Title="Magic mouse connection issues" Tags="|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1679" PostTypeId="2" ParentId="1677" CreationDate="2015-08-30T20:54:52.397" Score="6" Body="&lt;p&gt;By default, elementary OS has a magnifier that can be used by pressing &lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;+&lt;/kbd&gt; to zoom in and &lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;-&lt;/kbd&gt; to zoom out. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that &lt;kbd&gt;⌘&lt;/kbd&gt; refers to the &quot;Super&quot; key, which on your hardware might have a Windows logo, an Ubuntu logo, or the word &quot;Command&quot;.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2015-08-30T20:54:52.397" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1680" PostTypeId="2" ParentId="1668" CreationDate="2015-08-30T21:10:26.523" Score="1" Body="&lt;p&gt;&lt;strong&gt;Yes, although a USB will be faster.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following image is of the default start screen of elementary OS Freya 0.3 installer. You can either click the &lt;kbd&gt;Try elementary&lt;/kbd&gt; button, or the small &lt;kbd&gt;x&lt;/kbd&gt; in the top left-hand corner of the window (they both have the same effect).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vhm4f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vhm4f.png&quot; alt=&quot;elementary OS Installer&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-08-30T21:10:26.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1681" PostTypeId="1" CreationDate="2015-08-30T21:25:47.090" Score="4" ViewCount="359" Body="&lt;p&gt;Is there a way to acces terminal in the installer so I can change the desktop interface. The screensize is too big and I can not acces the menu's or buttons. &lt;/p&gt;&#xA;" OwnerUserId="1210" LastEditorUserId="1210" LastEditDate="2015-08-31T21:00:46.237" LastActivityDate="2021-09-19T10:48:23.990" Title="Cannot install due to screen size" Tags="|system-installation|display|high-dpi|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1682" PostTypeId="2" ParentId="1624" CreationDate="2015-08-30T21:34:47.283" Score="9" Body="&lt;p&gt;Geary does not have a contact management interface, but it does store contacts for auto-completion. These contacts are pulled from the emails that it has downloaded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are long-term goals for Geary to integrate into a system-wide contacts database (so a separate Contacts app could be used), but this is not yet implemented.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://mail.gnome.org/archives/geary-list/2014-July/msg00023.html&quot;&gt;Re: [Geary] How does Geary get my Google contacts?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2015-08-30T21:34:47.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1683" PostTypeId="1" CreationDate="2015-08-30T22:59:56.697" Score="1" ViewCount="83" Body="&lt;p&gt;&lt;p&gt;&#xA;I'm trying to print with my printer &lt;strong&gt;Canon pc-d440&lt;/strong&gt;. I plug in it into the computer and it install the driver without problem. However when i try to print something, nothing happend. The status of printer is idle and i cannot try to print test page because it is grayed out. The question is can i print with this printer on Linux optionally on Elementary OS? And if yes, how? &lt;p&gt;Thank you for answers and sorry for my English.&lt;/p&gt;&#xA;" OwnerUserId="1212" LastActivityDate="2015-08-30T22:59:56.697" Title="Printer Canon d440 is not working" Tags="|printer|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1684" PostTypeId="1" CreationDate="2015-08-31T02:18:16.433" Score="3" ViewCount="98" Body="&lt;p&gt;My fans don't work on my laptop clevo N150SD and when I make sensors I get this &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MlX8Q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MlX8Q.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already do &lt;code&gt;sensors-detect&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how i can get work my fans ?&lt;/p&gt;&#xA;" OwnerUserId="1182" LastEditorUserId="2708" LastEditDate="2015-11-26T07:13:14.427" LastActivityDate="2015-11-26T07:13:14.427" Title="Overheat , fan undetected" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2015-12-15T22:58:43.397" ContentLicense="CC BY-SA 3.0" />
  <row Id="1685" PostTypeId="1" CreationDate="2015-08-31T02:58:03.527" Score="4" ViewCount="4409" Body="&lt;p&gt;I have a stable wi-fi connection at my house. After 5-10 minutes, I can no longer stay connected to the internet. The dock will show that I&quot;m online and connected to the wifi, but nothing loads. I've tried several different browsers and other applications, which require internet connections and nothing. After a restart, everything will work fine... for 5-10 minutes until I get the exact same problems again. &lt;/p&gt;&#xA;" OwnerUserId="1213" LastActivityDate="2017-10-26T18:55:23.310" Title="Internet dropping after 5-10 minutes" Tags="|wifi|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1686" PostTypeId="1" CreationDate="2015-08-31T08:01:02.067" Score="2" ViewCount="182" Body="&lt;p&gt;I have a custom keymap,  &lt;a href=&quot;http://tlundqvist.org/sv_dvorak/drivers/se_sv_dvorak_new.xorg&quot; rel=&quot;nofollow&quot;&gt;http://tlundqvist.org/sv_dvorak/drivers/se_sv_dvorak_new.xorg&lt;/a&gt; that I want to be able to select via system preferences. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have copied the keymap to the other keymap files, naming it se_sv_dvorak.&#xA;I can load it with setxkbmap se_sv_dvorak, but how do I add it so it can be set via system preferences?&lt;/p&gt;&#xA;" OwnerUserId="1216" LastActivityDate="2015-08-31T19:59:42.007" Title="Add custom keymap, system preferences" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1687" PostTypeId="2" ParentId="1686" CreationDate="2015-08-31T08:05:50.557" Score="1" Body="&lt;p&gt;My googlefu upped one level just after asking this question.&#xA;Seems like the file /usr/share/X11/xkb/rules/evdev.xml shall be edited. At least in Ubuntu. Will try this later and report back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Seems like this is not possible at the moment &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1486857&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1486857&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1216" LastEditorUserId="1216" LastEditDate="2015-08-31T19:59:42.007" LastActivityDate="2015-08-31T19:59:42.007" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1689" PostTypeId="1" CreationDate="2015-08-31T12:11:01.997" Score="1" ViewCount="3356" Body="&lt;p&gt;I just finished installing Freya on my HP ProBook 4540s laptop. After successful install, it prompted to remove the install USB and restart. So I did. After restarting, I get a &lt;code&gt;No bootable image found, notebook will shutdown&lt;/code&gt; message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's worth noting that my &lt;strong&gt;Boot Mode&lt;/strong&gt; is set to &lt;strong&gt;UEFI Native (Without CSM)&lt;/strong&gt;. Also, the HDD I'm trying to install it to is a brand new Toshiba 500GB HDD and I don't intend to dual boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="1217" LastActivityDate="2015-09-02T06:28:06.417" Title="No boot device after install on HP ProBook 4540s" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-16T10:23:50.367" ContentLicense="CC BY-SA 3.0" />
  <row Id="1691" PostTypeId="2" ParentId="1664" CreationDate="2015-08-31T13:25:24.387" Score="0" Body="&lt;p&gt;I think that depends on your timezone, I'm using the Asuncion Paraguay timezone and I have monday as first day of the week. &lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-08-31T13:25:24.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1692" PostTypeId="1" CreationDate="2015-08-31T14:28:28.870" Score="2" ViewCount="50" Body="&lt;p&gt;I've ran into this issue where the &lt;em&gt;brightness control&lt;/em&gt; on my laptop will &quot;repeat&quot; for a second or so, even when tapped lightly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The shortcuts are &lt;code&gt;Fn+Home&lt;/code&gt; and &lt;code&gt;Fn+End&lt;/code&gt; on this LG Z1 Pro Express Dual.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I tried:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no &lt;code&gt;Fn&lt;/code&gt; lock. I tried toggling the BIOS setting for &quot;sticky &lt;code&gt;Fn&lt;/code&gt; key&quot; either way, with no result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the brightness adjustment is &lt;em&gt;going on&lt;/em&gt; in these repeated little stages (like 5 FPS) the window manager is absolutely unresponsive, and takes a few seconds to come back. Can't even move the mouse while it's happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; I added &lt;code&gt;acpi_osi=Linux acpi_backlight=vendor&lt;/code&gt; to GRUB configuration, and now it doesn't repeat quite as much. Still goes 5 FPS while the display is &quot;fading&quot; and the indicator overlay is showing. Maybe it's not repeating, just tries to fade smoothly to new values and is really slow at doing that?&lt;br&gt;&#xA;Doesn't seem to have a problem doing all the other compositing stuff though.&lt;/p&gt;&#xA;" OwnerUserId="782" LastEditorUserId="3757" LastEditDate="2016-04-20T07:24:51.247" LastActivityDate="2016-04-20T07:24:51.247" Title="Brightness keys repeat many times after released" Tags="|boot|hardware|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1693" PostTypeId="2" ParentId="1664" CreationDate="2015-08-31T15:08:47.573" Score="7" Body="&lt;p&gt;Use a locale from a culture where that is the norm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to make that a sticky setting for your user in the system, by putting something like that in &lt;code&gt;~/.xsessionrc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export LANG=en_US.UTF-8&#xA;export LANGUAGE=en_US.utf-8&#xA;export LC_TIME=en_GB.UTF-8&#xA;export LC_MEASUREMENT=en_GB.UTF-8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which is basically &quot;I want system messages in American, but time and measurement in UK English&quot;. Monday is the first day of the week in UK culture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and back in for that to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, you could try make that a system-wide change.&lt;br&gt;&#xA;Assuming your &lt;code&gt;locale&lt;/code&gt; outputs &lt;code&gt;LANG=en_US.UTF-8&lt;/code&gt;, find and change &lt;code&gt;first_weekday 1&lt;/code&gt; to &lt;code&gt;first_weekday 2&lt;/code&gt; in the US locale file (do a &lt;code&gt;sudo nano /usr/share/i18n/locales/en_US&lt;/code&gt;). Then do a &lt;code&gt;sudo locale-gen&lt;/code&gt; and reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The latter is not recommended in a server setting, but you should be fine on your own machine.&lt;/p&gt;&#xA;" OwnerUserId="782" LastEditorUserId="782" LastEditDate="2015-08-31T23:11:29.787" LastActivityDate="2015-08-31T23:11:29.787" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1694" PostTypeId="1" CreationDate="2015-08-31T19:50:10.620" Score="1" ViewCount="457" Body="&lt;p&gt;I have tried shutting down and restarting from the desktop icon. Each time, the computer hangs at a blank screen and never shuts down. The fan starts whirring.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I tried shutting down from the terminal to see what was causing the problem, and this is what I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wait-for-state stop/waiting&#xA;Enabling radio: wifi.&#xA;Applying power save settings...done &#xA;*Stopping rsync daemon rsync  [OK]&#xA;*speech-dispatcher disabled; edit /etc/default/speech-dispatcher&#xA;*Asking all remaining processes to terminate...  [OK]&#xA;*All processes ended within 1 seconds... [OK]&#xA;ModemManager [1295]: &amp;lt;warn&amp;gt; Could not acquire the 'org.freedesktop.ModemManager1' service name&#xA;ModemManager [1295]: &amp;lt;info&amp;gt; ModemManager is shut down&#xA;*Deactivating swap...&#xA;*Unmounting local filesystems&#xA;*Will now halt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, it gets hung up and the fan on the computer starts whirring.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help!&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="604" LastEditorUserId="138" LastEditDate="2015-09-02T00:41:18.763" LastActivityDate="2015-09-02T00:41:18.763" Title="Cannot shut down or restart Freya" Tags="|release-freya|system|shutdown|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2015-09-06T20:42:02.953" ContentLicense="CC BY-SA 3.0" />
  <row Id="1695" PostTypeId="2" ParentId="1632" CreationDate="2015-09-01T00:05:21.637" Score="3" Body="&lt;p&gt;I had a similar problem to this, headphones didn't work automatically but they appeared in Switchboard under sound, there I could switch to them and they worked normally, try doing this first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it works then to make this happen automatically when you connect them open the file &lt;code&gt;/etc/pulse/default.pa&lt;/code&gt; as root and add the following line to the end:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;load-module module-switch-on-connect&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then reboot or run the command &lt;code&gt;pacmd load-module module-switch-on-connect&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="146" LastActivityDate="2015-09-01T00:05:21.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1696" PostTypeId="1" CreationDate="2015-09-01T02:52:21.990" Score="1" ViewCount="167" Body="&lt;p&gt;I have an administrator account and user account.&#xA;My user account GUI works fine, but when I login to my administrator account the password is accepted and the screen goes to black as if it's logging in and then dumps back to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have confirmed the password is correct because this semi-login doesn't occur when I intentionally type the incorrect password, it shakes the password box and that's it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can login into the admin account through the console but it just fails to launch the GUI under the admin account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone suggest the problem?&lt;/p&gt;&#xA;" OwnerUserId="1221" LastEditorUserId="3757" LastEditDate="2016-04-25T07:42:50.337" LastActivityDate="2016-07-28T10:38:17.237" Title="Login to administrator gui fails" Tags="|greeter|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1697" PostTypeId="2" ParentId="1633" CreationDate="2015-09-01T03:56:14.090" Score="0" Body="&lt;p&gt;So I got a new hard drive and now it runs perfectly.&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2015-09-01T03:56:14.090" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1698" PostTypeId="1" CreationDate="2015-09-01T04:25:36.313" Score="2" ViewCount="140" Body="&lt;p&gt;I'm using Maya to synchronize my calendar (with calDav).&#xA;When I synchronize the same calendar on my Android app, I get all events displayed at the right time. But when I do it in Maya, I get the events displayed in the default time zone (UTC I guess).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the events to be displayed in the right time zone?&lt;/p&gt;&#xA;" OwnerUserId="1222" LastEditorUserId="3757" LastEditDate="2016-04-20T07:23:34.450" LastActivityDate="2017-12-03T05:02:23.223" Title="Changing the time zone in Maya with caldav" Tags="|calendar|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1700" PostTypeId="2" ParentId="1592" CreationDate="2015-09-01T14:50:49.910" Score="1" Body="&lt;p&gt;Installing nvidia drivers manually is always a pain (ended up multiple times with a black screen after reboot)&#xA;I suggest installing the latest stable driver via the xorg edgers graphics drivers ppa:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install nvidia-352&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="169" LastEditorUserId="169" LastEditDate="2015-09-24T09:53:30.837" LastActivityDate="2015-09-24T09:53:30.837" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1701" PostTypeId="1" CreationDate="2015-09-01T15:42:39.037" Score="10" ViewCount="1164" Body="&lt;p&gt;As most of users, I organize my files in folders using a standard file manager (Pantheon Files in elementary OS). However, I would like to also have another, quicker way to retrieve the files I need which makes use of &lt;strong&gt;tags&lt;/strong&gt;.&#xA;To be more specific, I need to manage a large quantity of document files (pdf, doc, odt, etc.), so I'm not after a media library manager to organize my music and videos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you recommend any apps that work well with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="5565" LastEditDate="2016-10-06T02:14:43.230" LastActivityDate="2016-10-06T02:14:43.230" Title="Looking for a tag-based file manager" Tags="|software-recommendation|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1702" PostTypeId="1" AcceptedAnswerId="1771" CreationDate="2015-09-01T16:15:56.990" Score="8" ViewCount="1096" Body="&lt;p&gt;Is there any way to connect my Airplay system to Noise? I know that I can make it work with XMMS2 through a plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an AirPort Express which run perfectly with OSX 10.10 and Windows 10.&lt;/p&gt;&#xA;" OwnerUserId="1224" LastEditorUserId="68" LastEditDate="2015-09-04T01:56:23.970" LastActivityDate="2017-12-15T11:00:24.303" Title="Using Airplay with Noise" Tags="|music|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1705" PostTypeId="1" CreationDate="2015-09-01T17:14:49.493" Score="2" ViewCount="563" Body="&lt;p&gt;So the default video player audience I am confused about! How can I get it to be useful? Out of the box it isn't able to play public videos or even my go pro videos! If I download VLC that seems to work well but videos isn't working right? What do I do to make it work? Can you make it work out of the box a little better or is that part of the open source media law?&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2015-09-01T23:50:36.067" Title="How to get Audience working?" Tags="|audience|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1706" PostTypeId="1" AcceptedAnswerId="1712" CreationDate="2015-09-01T17:29:02.440" Score="3" ViewCount="837" Body="&lt;p&gt;System tray icons do not appear in Wingpanel for either nodewebkit applications that use the built in NW.js trayicon library, or Java applications that use &lt;code&gt;java.awt.SystemTray&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Java, &lt;code&gt;SystemTray.isSupported()&lt;/code&gt;, returns false in elementary OS, presumably the same is true for the NW.js library.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this something that can be worked around? If not, are there any plans to support these libraries for system tray icons?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;n.b. The only reference to this I could find after much searching was &lt;a href=&quot;https://stackoverflow.com/questions/29735488/systemtray-in-elementary-os-doesnt-work&quot;&gt;this question over on Stackoverflow&lt;/a&gt; which has no answers (could do with better tagging, perhaps).&lt;/p&gt;&#xA;" OwnerUserId="884" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2015-09-01T23:37:53.253" Title="System tray icons for Java and nodewebkit applications" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-03T01:45:01.857" ContentLicense="CC BY-SA 3.0" />
  <row Id="1708" PostTypeId="1" AcceptedAnswerId="1773" CreationDate="2015-09-01T18:36:36.413" Score="6" ViewCount="4807" Body="&lt;p&gt;When I first installed elementary, I had the Intel HD5500 glitch and accidentally made my root language Danish. While I managed to change my user language to English, I can't seem to figure out how to get it changed for root uses (when I open Files as administrator for example).&lt;/p&gt;&#xA;" OwnerUserId="1228" LastEditorUserId="68" LastEditDate="2015-09-01T23:36:50.747" LastActivityDate="2015-09-04T03:05:29.247" Title="How to change the root system language?" Tags="|language|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1709" PostTypeId="2" ParentId="1701" CreationDate="2015-09-01T18:55:15.687" Score="5" Body="&lt;p&gt;Maybe try something like &lt;a href=&quot;http://www.datacrow.net/&quot; rel=&quot;nofollow&quot;&gt;Data Crow&lt;/a&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was never much satisfied with the &quot;iTunes&quot; approach to this, wherein you get an app to &quot;Import&quot; some &quot;Library&quot; of items that you can then tag and search and comment on. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I always ended up hacking together my own solution. Except on Haiku or OSX &gt; 10.8, which get tagging right (in my opinion).&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Poor man's solution&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You can make a folder named &quot;Tags&quot; in your Home folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then make some sub-folders within &lt;em&gt;for actual tags&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And sym-link whatever you need there.&lt;br&gt;&#xA;The act of sym-linking (or use &lt;a href=&quot;http://tmsu.org/&quot; rel=&quot;nofollow&quot;&gt;TMSU&lt;/a&gt;) can be automated with a Contract for Files, so that &quot;Tag this @Work&quot; shows up in the context-menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That would work for a few tags, like &quot;areas&quot; in a GTD system, or &quot;genres&quot; in a music collection.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Back when I used Xfce with Thunar (the file manager), I used a Python script with a package I got out standard repos -- it displayed a simple dialog box. Let me see if I can possibly dig that up for you...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Also if the devs are reading this, Thunar had a fantastic feature -- a &quot;Templates&quot; folder, which populated the &quot;New File/Folder&quot; context-menu.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="782" LastEditorUserId="782" LastEditDate="2015-09-02T22:41:47.617" LastActivityDate="2015-09-02T22:41:47.617" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1710" PostTypeId="2" ParentId="1705" CreationDate="2015-09-01T19:16:55.750" Score="5" Body="&lt;p&gt;Due to US patent law, elementary is not able to freely distribute codecs for many popular media formats. You will likely need to purchase a license for the codecs &lt;a href=&quot;http://www.oneplaydirect.com/oneplay/oneplay-codec-pack/&quot; rel=&quot;nofollow&quot;&gt;from Fluendo on their website&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you're in a country where you are not affected by this patent law, you can install a set of codecs provided by Canonical with the following command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;VLC is outside of US jurisdiction, so they are able to distribute codecs in accordance with French patent law.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-01T23:50:36.067" LastActivityDate="2015-09-01T23:50:36.067" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1711" PostTypeId="1" CreationDate="2015-09-01T19:32:18.360" Score="3" ViewCount="165" Body="&lt;p&gt;When I minimize application and than I want to unminimize, I can't. I click on the app on plank, the app is activated but it's not showing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Video expample: &lt;a href=&quot;https://vid.me/GwnW&quot; rel=&quot;nofollow&quot;&gt;https://vid.me/GwnW&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="1229" LastEditorUserId="26" LastEditDate="2015-09-03T10:34:25.677" LastActivityDate="2015-09-03T10:34:25.677" Title="Can't open minimized windows" Tags="|plank|gala|" AnswerCount="0" CommentCount="4" ClosedDate="2015-09-05T10:46:34.160" ContentLicense="CC BY-SA 3.0" />
  <row Id="1712" PostTypeId="2" ParentId="1706" CreationDate="2015-09-01T19:58:00.253" Score="3" Body="&lt;p&gt;I was looking for more information regarding tray icons and NW.js couple of weeks ago. The issue is that elementary and other distributions like Ubuntu are using &lt;a href=&quot;https://unity.ubuntu.com/projects/appindicators/&quot; rel=&quot;nofollow&quot;&gt;App Indicators&lt;/a&gt; instead of a classic Gtk tray icons. App Indicators are not supported by NW.js at the moment. There is already a &lt;a href=&quot;https://github.com/nwjs/nw.js/pull/2327&quot; rel=&quot;nofollow&quot;&gt;pull request&lt;/a&gt; fixing this, but it has not been merged yet as it removes the support for Gtk tray icons.&lt;/p&gt;&#xA;" OwnerUserId="228" LastActivityDate="2015-09-01T19:58:00.253" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1713" PostTypeId="1" CreationDate="2015-09-01T20:29:56.310" Score="1" ViewCount="174" Body="&lt;p&gt;I am trying to access the Flash player global setting however when I right click it instantly closes the options and opens a new tab then goes to the &lt;a href=&quot;http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html&quot; rel=&quot;nofollow&quot;&gt;Flash Player help site&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Ubuntu this issue can be resolved by re-loading Flash Player via synaptic however this doesn’t work on elementary OS … any advice? &lt;/p&gt;&#xA;" OwnerUserId="1205" LastEditorUserId="68" LastEditDate="2015-09-01T23:35:07.310" LastActivityDate="2015-10-01T23:50:50.273" Title="Access Flash Player global settings (Firefox)" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1714" PostTypeId="1" CreationDate="2015-09-01T21:12:00.943" Score="3" ViewCount="659" Body="&lt;p&gt;I've always been able to fix any issues I've had with Google Chrome's icon by setting a &lt;code&gt;StartupWMClass&lt;/code&gt; &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/how-can-i-fix-the-fuzzy-google-chrome-icon-that-appears-in-plank&quot;&gt;as described here&lt;/a&gt;, however as of today the icon broke completely, and &lt;code&gt;StartupWMClass&lt;/code&gt; didn't solve it. It shows up as this now:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DlOtB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DlOtB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;code&gt;xprop | grep WM_CLASS&lt;/code&gt; and the result, as expected, was &lt;code&gt;Google-chrome-stable&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've attempted purging &lt;code&gt;google-chrome-stable&lt;/code&gt; and removing &lt;code&gt;~/.config/google-chrome/&lt;/code&gt; but to no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; A reboot seemed to fix the issue, however I'll leave this question open if anyone has any idea what could've caused it, or how to fix it without having to reboot. This is Linux, not Windows.&lt;/p&gt;&#xA;" OwnerUserId="1230" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-02T11:47:07.070" Title="Google Chrome no longer has an icon" Tags="|icons|google-chrome|" AnswerCount="0" CommentCount="3" ClosedDate="2015-09-06T15:35:42.500" ContentLicense="CC BY-SA 3.0" />
  <row Id="1716" PostTypeId="1" AcceptedAnswerId="1755" CreationDate="2015-09-01T22:42:42.210" Score="9" ViewCount="12337" Body="&lt;p&gt;Is it possible to change the options of the Terminal without installing the elementary-tweaks tool?!&#xA;I want to change the transparency to 90%, the theme to &quot;Chalk&quot; and the Cursor shape to I-Beam.&lt;/p&gt;&#xA;" OwnerUserId="1231" LastActivityDate="2020-03-27T18:42:52.667" Title="Change Options from the Terminal" Tags="|release-freya|pantheon-terminal|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1717" PostTypeId="1" CreationDate="2015-09-01T22:52:11.843" Score="3" ViewCount="225" Body="&lt;p&gt;When I am working with eclipse, I am used to see symbols in the menu bars.&#xA;For example I open eclipse and click on the button &quot;File&quot; then it shows me the menu from File. But left from the texts are no symbols.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example: Normally left from the Text &quot;Save&quot; is a little diskette symbol.&lt;/p&gt;&#xA;" OwnerUserId="1231" LastEditorUserId="45" LastEditDate="2015-09-12T03:49:08.950" LastActivityDate="2015-09-16T12:29:34.727" Title="Do menus normally have icons in elementary OS?" Tags="|release-freya|design|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1718" PostTypeId="2" ParentId="1713" CreationDate="2015-09-01T23:33:59.850" Score="1" Body="&lt;p&gt;You should stay on &lt;a href=&quot;http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.html&quot; rel=&quot;nofollow&quot;&gt;that website&lt;/a&gt; as it in fact contains the Flash Player global settings (the flash element at the top). Quoting: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The Settings Manager that you see above is not an image; it is the actual Settings Manager. Click the tabs to see different panels, and click the options in the panels to change your Adobe Flash Player settings.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-09-01T23:33:59.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1719" PostTypeId="2" ParentId="1685" CreationDate="2015-09-01T23:48:22.397" Score="4" Body="&lt;p&gt;The driver of your wifi card is problematic (almost all of Realtek are)&#xA;you can try this driver &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtlwifi_new&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Make sure you have the needed tools&#xA;sudo apt-get install linux-headers-generic build-essential git&#xA;&#xA;# Close the driver&#xA;git clone https://github.com/lwfinger/rtlwifi_new.git&#xA;&#xA;# Enter in the driver directory&#xA;cd rtlwifi_new&#xA;&#xA;# Compile&#xA;make sudo&#xA;&#xA;# Install&#xA;make install&#xA;&#xA;# And finally, reboot&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2261702&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuforums.org/showthread.php?t=2261702&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="76" LastEditDate="2017-10-26T18:55:23.310" LastActivityDate="2017-10-26T18:55:23.310" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1720" PostTypeId="1" CreationDate="2015-09-02T00:15:17.550" Score="1" ViewCount="104" Body="&lt;p&gt;When I boot into elementary OS all the windows are messed up like this. I tried re-downloading the OS and nothing changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/K9zC9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K9zC9.jpg&quot; alt=&quot;broken installer&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1233" LastEditorUserId="3757" LastEditDate="2016-04-25T07:41:53.147" LastActivityDate="2016-04-25T07:41:53.147" Title="How can I fix this graphical/rendering issue with the installer on my system?" Tags="|release-freya|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="1722" PostTypeId="2" ParentId="1689" CreationDate="2015-09-02T06:28:06.417" Score="0" Body="&lt;p&gt;I reinstalled using the &lt;strong&gt;Legacy&lt;/strong&gt; boot mode in BIOS and now it's working fine. Apparently, HP ProBook 4540s' UEFI feature is buggy or my BIOS version needs updating.&lt;/p&gt;&#xA;" OwnerUserId="1217" LastActivityDate="2015-09-02T06:28:06.417" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1723" PostTypeId="2" ParentId="1685" CreationDate="2015-09-02T07:35:10.510" Score="2" Body="&lt;p&gt;I've got the same problem with the same Wi-Fi card, execute the following command in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;options rtl8723be fwlps=0&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is the driver going to sleep. This command prevents it by disabling power saving.&lt;/p&gt;&#xA;" OwnerUserId="1182" LastEditorUserId="137" LastEditDate="2015-09-02T11:29:58.140" LastActivityDate="2015-09-02T11:29:58.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1724" PostTypeId="1" AcceptedAnswerId="1792" CreationDate="2015-09-02T08:51:47.023" Score="4" ViewCount="1441" Body="&lt;p&gt;If I remove a user at the relevant  user management settings, does it also destroy it's home directory contents? If not, what's the best way of eliminating that data and remove all the user footprint?&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="132" LastEditDate="2019-12-01T21:25:25.903" LastActivityDate="2019-12-01T21:25:25.903" Title="How to remove user and his /home contents" Tags="|settings|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="1725" PostTypeId="1" CreationDate="2015-09-02T09:35:52.497" Score="0" ViewCount="700" Body="&lt;p&gt;I had elementary OS and Windows 7 installed. In Windows 7 i deleted the elementary OS Partition. After rebooting i got this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: file not found.&#xA;grub rescue&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I searched the internet and wise Internet suggested putting the Windows DVD in the computer and click repair and type something in cmd.exe. Problem: When I click on &quot;Repair your PC&quot; a message says that the DVD and the Windows Version are not compatible. But it is the Same DVD I installed Windows earlier and I didn't do any updates!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ok so next try:&#xA;Installing Ubuntu again.&#xA;I did it using a bootable USB Stick and successfully installed Ubuntu. I thought that GRUB would be restored after I reinstall Ubuntu. But false! Still the same message.&#xA;Then in grub rescue I tried ls:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(hd0)(hd0,msdos5) (hd0,msdos4) (hd0,msdos2) (hd0,msdos1) (hd1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(hd1) is the bootable USB Stick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried searching for the /boot/grub folder on every drive. Every drive got me this: &lt;code&gt;error: unknown filesystem.&lt;/code&gt; except for (hd0,msdos5) which gave me &lt;code&gt;error: bad filename.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am really confused, really don't know what to do and I don't want to lose my data on the Windows Partition! Can anyone help me?&lt;/p&gt;&#xA;" OwnerUserId="1235" LastActivityDate="2016-02-05T17:40:37.573" Title="Grub Rescue Madness after deleting Elementary OS" Tags="|release-freya|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1726" PostTypeId="1" CreationDate="2015-09-02T11:23:29.867" Score="5" ViewCount="536" Body="&lt;p&gt;I really like elementary OS but I'm missing one important thing for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When adjusting and closing windows, is there any possibility in elementary to remember the last window size and position?&lt;/p&gt;&#xA;" OwnerUserId="1236" LastEditorUserId="242" LastEditDate="2015-09-02T17:05:22.197" LastActivityDate="2015-09-02T17:05:22.197" Title="How to remember the last window size?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1727" PostTypeId="1" CreationDate="2015-09-02T11:34:53.250" Score="3" ViewCount="453" Body="&lt;p&gt;I'm running elementary on my desktop with Nvidia GTX460 graphic card and enough hardware power to run everything smoothly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore it is very strange that when I change the size of my window, animation is very laggy and not fluent. I would think it might be related to graphics drivers, but I tested all of the available, with same results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;" OwnerUserId="1236" LastEditorUserId="68" LastEditDate="2015-09-04T02:18:32.190" LastActivityDate="2015-09-04T02:18:32.190" Title="Why is the window resize animation running slowly?" Tags="|graphic-drivers|window-management|performance|" AnswerCount="0" CommentCount="6" ClosedDate="2015-09-05T20:19:54.477" ContentLicense="CC BY-SA 3.0" />
  <row Id="1728" PostTypeId="2" ParentId="1726" CreationDate="2015-09-02T11:39:57.663" Score="4" Body="&lt;p&gt;Ahhh sorry, I was already able to find the solution. As long as I disable the setting that windows do not get maximized when its above 70%, the last size is now remembered !!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter auto-maximize false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1236" LastEditorUserId="138" LastEditDate="2015-09-02T13:29:27.510" LastActivityDate="2015-09-02T13:29:27.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1729" PostTypeId="2" ParentId="1716" CreationDate="2015-09-02T13:38:43.743" Score="0" Body="&lt;p&gt;Command to change the Gtk theme (note that I'm using Numix as an example):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface gtk-theme &quot;Numix&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Command to change the icon theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface icon-theme &quot;Numix&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Command to change the metacity theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences theme &quot;Numix&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As for the cursor theme, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/892/how-to-change-the-mouse-cursor-theme&quot;&gt;here's a relevant question&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't quite understand what kind of transparency are you trying to set.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-02T13:38:43.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1731" PostTypeId="1" AcceptedAnswerId="1772" CreationDate="2015-09-02T15:29:31.923" Score="5" ViewCount="383" Body="&lt;p&gt;I am using a custom keyboard layout and custom options not supported through the Settings &gt; Keyboard GUI. My workaround to this is to create a script that sets the layout and its options with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap my_layout -option 'shift:both_capslock_cancel,grp:caps_switch,grp_led:scroll'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have this script executed on session startup (added through the Settings -&gt; Applications -&gt; Startup GUI).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue I have is that when locking and unlocking the system, or when opening the Keyboard settings panel, the layout and options are reset to those set through the GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to prevent the layout from being reset every time?&lt;/p&gt;&#xA;" OwnerUserId="884" LastEditorUserId="884" LastEditDate="2015-09-04T07:59:18.357" LastActivityDate="2021-09-13T13:07:38.340" Title="Prevent keyboard layout and options from being reset by system" Tags="|settings|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1733" PostTypeId="2" ParentId="1725" CreationDate="2015-09-02T18:20:44.327" Score="2" Body="&lt;p&gt;I had the same problem once I got rid of Ubuntu from my laptop which had dual boot. The problem is caused because grub is also removed along with the Linux distribution preventing you from booting to either Windows or your Linux distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If all you want to do is to boot to Windows directly, you could do the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;insert Windows CD&lt;/li&gt;&#xA;&lt;li&gt;go to recovery mode&lt;/li&gt;&#xA;&lt;li&gt;open command prompt&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;type the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bootrec /fixmbr&#xA;Bootrec /fixboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You should be able to boot directly to Windows after this.&lt;/p&gt;&#xA;" OwnerUserId="773" LastActivityDate="2015-09-02T18:20:44.327" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1734" PostTypeId="1" CreationDate="2015-09-02T18:32:17.287" Score="12" ViewCount="5470" Body="&lt;p&gt;I'm experiencing performance issues with my Intel graphics card like stuttering animations, artifacts, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've attempted to resolve the issue by running the &lt;a href=&quot;https://01.org/linuxgraphics/downloads&quot;&gt;Intel Graphics Installer from 01.org&lt;/a&gt;, but it appears to not work due to dependency errors or an incompatible LSB Release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the latest compatible Intel graphics driver on elementary OS and ensure the best performance?&lt;/p&gt;&#xA;" OwnerUserId="1193" LastEditorUserId="45" LastEditDate="2015-09-30T19:22:20.007" LastActivityDate="2015-10-06T00:38:02.007" Title="How do I install the latest Intel Linux Graphics?" Tags="|graphic-drivers|hardware|drivers|intel|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1736" PostTypeId="1" CreationDate="2015-09-02T19:57:32.647" Score="2" ViewCount="1138" Body="&lt;p&gt;I am familiar with Ubuntu 14.04 and once its installation is complete I can install the NVIDIA graphic card driver from the Software &amp;amp; Updates. But when I installed Elementary OS Freya and then tried to install the Nvidia driver I couldn't find it. Why is that?&lt;/p&gt;&#xA;" OwnerUserId="104" LastEditorUserId="3757" LastEditDate="2016-04-23T12:57:46.173" LastActivityDate="2016-04-23T12:57:46.173" Title="NVIDIA graphic card driver" Tags="|graphic-drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1738" PostTypeId="2" ParentId="1736" CreationDate="2015-09-02T20:38:50.413" Score="1" Body="&lt;p&gt;Because it is somewhat hidden in elementary OS (as it doesn't have it's own Software Center).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Ubuntu Software Center -&amp;gt; Edit (at the top menubar) -&amp;gt; Software Sources -&amp;gt; Additional Drivers.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it's a pretty weird place for a thing that is so important but I think we have to wait for Loki and automatic hardware detection.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-09-02T20:38:50.413" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1740" PostTypeId="1" AcceptedAnswerId="1769" CreationDate="2015-09-03T05:35:30.033" Score="2" ViewCount="699" Body="&lt;p&gt;For example I want to chose a dark theme for PhpStorm &lt;a href=&quot;http://screenshot3.seobit.ru/roma.2015.09.03___08:30:1441258219.png&quot; rel=&quot;nofollow&quot;&gt;http://screenshot3.seobit.ru/roma.2015.09.03___08:30:1441258219.png&lt;/a&gt; (header of PhpStorm)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;phpstorm.desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=PhpStorm&#xA;Exec=/home/roma/Rarely/Programs/PhpStorm/bin/phpstorm.sh&#xA;Icon=/usr/share/icons/elementary-add/apps/48/phpstorm.svg&#xA;Terminal=false&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Categories=Develop;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="431" LastActivityDate="2016-01-27T05:34:56.203" Title="How can I chose dark theme for a specific window from terminal?" Tags="|release-freya|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1741" PostTypeId="1" AcceptedAnswerId="1790" CreationDate="2015-09-03T05:59:17.347" Score="3" ViewCount="776" Body="&lt;p&gt;The official backup tool in Debian systems is dejadup. It has integration with Nautlus in Gnome. Is there any possible way of getting the same support in Files?&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="4185" LastEditDate="2016-04-30T05:47:30.080" LastActivityDate="2016-04-30T05:47:30.080" Title="How to integrate Files with dejadup" Tags="|pantheon-files|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1742" PostTypeId="1" CreationDate="2015-09-03T06:27:31.413" Score="1" ViewCount="1319" Body="&lt;p&gt;My (correct) password no longer works at login screen. At the login screen the password field accepts my password but does not allow me to log in. I just get the usual &quot;field-shake&quot; response and a blank field.&lt;/p&gt;&#xA;" OwnerUserId="1245" LastEditorUserId="84" LastEditDate="2015-09-03T14:06:04.703" LastActivityDate="2022-06-11T21:02:40.230" Title="(Correct) password not working" Tags="|greeter|security|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1743" PostTypeId="1" AcceptedAnswerId="1828" CreationDate="2015-09-03T08:19:03.903" Score="2" ViewCount="177" Body="&lt;p&gt;I'm running elementary OS freya and have a very stable system, just the way I like it.  Today I did an &lt;code&gt;apt-get update&lt;/code&gt; and &lt;code&gt;apt-get upgrade&lt;/code&gt; and the following message appeared:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  The following packages have been kept back:&#xA;  libpantheon-files-core0 libpantheon-files-widgets0 libscratchcore0&#xA;  midori-granite pantheon-files scratch-text-editor&#xA;  switchboard-plug-notifications switchboard-plug-pantheon-shell&#xA;  0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am aware that I can use &lt;code&gt;apt-get dist-upgrade&lt;/code&gt;, however I have heard that this command should be used with caution as it can create an unstable system if there are conflicting dependencies/files removed or changed etc.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is, is it safe to leave files 'kept back'? Will the files ever get upgraded using &lt;code&gt;apt-get update ; apt-get upgrade&lt;/code&gt;, or will they always require &lt;code&gt;apt-get dist-upgrade&lt;/code&gt;? My main concern is I do not know what all of these held back packages are, what they do, what dependencies or other files they may effect if upgraded. Any advice is greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-09-05T21:30:53.500" Title="is it safe to leave packages held back?" Tags="|apt|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1744" PostTypeId="5" CreationDate="2015-09-03T09:50:14.307" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-09-03T09:50:14.307" LastActivityDate="2015-09-03T09:50:14.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1745" PostTypeId="4" CreationDate="2015-09-03T09:50:14.307" Score="0" Body="Questions related to physical hardware, and how it interacts with elementary OS." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-09-03T18:11:23.350" LastActivityDate="2015-09-03T18:11:23.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1746" PostTypeId="5" CreationDate="2015-09-03T09:57:29.637" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-09-03T09:57:29.637" LastActivityDate="2015-09-03T09:57:29.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1747" PostTypeId="4" CreationDate="2015-09-03T09:57:29.637" Score="0" Body="Questions about the Unified Extensible Firmware Interface that finally replaced the BIOS on newer desktops and laptops with the release of Windows 8. UEFI is independent from CPU architectures and supports booting via UEFI with and without secure boot enabled as well as legacy booting via CSM." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-09-03T18:11:45.867" LastActivityDate="2015-09-03T18:11:45.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1748" PostTypeId="5" CreationDate="2015-09-03T09:58:40.423" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-09-03T09:58:40.423" LastActivityDate="2015-09-03T09:58:40.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1749" PostTypeId="4" CreationDate="2015-09-03T09:58:40.423" Score="0" Body="Questions related to Suspend Mode, which is a special low-power mode often used on laptops that preserves the contents of RAM while using less power than normal." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-09-03T18:11:20.693" LastActivityDate="2015-09-03T18:11:20.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1750" PostTypeId="5" CreationDate="2015-09-03T10:00:47.353" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-09-03T10:00:47.353" LastActivityDate="2015-09-03T10:00:47.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1751" PostTypeId="4" CreationDate="2015-09-03T10:00:47.353" Score="0" Body="Questions about Virtualizing elementary OS or virtualizing other operating systems within elementary OS." OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-09-03T18:11:48.947" LastActivityDate="2015-09-03T18:11:48.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1752" PostTypeId="5" CreationDate="2015-09-03T10:21:31.950" Score="0" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qxchc.png&quot; alt=&quot;Pantheon Files&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="84" LastEditDate="2015-09-03T20:51:40.380" LastActivityDate="2015-09-03T20:51:40.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1753" PostTypeId="4" CreationDate="2015-09-03T10:21:31.950" Score="0" Body="Questions about the default file manager, Files (also known as Pantheon Files), which can be used to perform all file management tasks, including accessing the entire file system." OwnerUserId="26" LastEditorUserId="84" LastEditDate="2015-09-03T18:11:05.363" LastActivityDate="2015-09-03T18:11:05.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1754" PostTypeId="1" AcceptedAnswerId="1758" CreationDate="2015-09-03T11:05:54.750" Score="24" ViewCount="28194" Body="&lt;p&gt;In other OSes, in the power settings I am able to configure a laptop's 'Close lid' behaviour. Options are like:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Hibernate&lt;/li&gt;&#xA;&lt;li&gt;Sleep&lt;/li&gt;&#xA;&lt;li&gt;Power off&lt;/li&gt;&#xA;&lt;li&gt;Do nothing&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I do not see such an option in elementary OS Freya power settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GLJtZ.png&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GLJtZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my scenario, I want it to do nothing but it always sleeps instead (I have external devices attached and need to tuck the laptop away).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any workarounds to lack of GUI options? Or am I missing a GUI option elsewhere?&lt;/p&gt;&#xA;" OwnerUserId="884" LastEditorDisplayName="user170" LastEditDate="2016-06-22T09:35:57.947" LastActivityDate="2020-06-01T07:59:50.723" Title="How to change laptop lid close behaviour (to not suspend when the lid is closed)" Tags="|settings|power|laptop|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1755" PostTypeId="2" ParentId="1716" CreationDate="2015-09-03T11:47:44.033" Score="9" Body="&lt;p&gt;To change the transparency in Terminal you can use gsettings like this:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings opacity 90&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not happy with the result, you can always change it to a different value or reset it to the default like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.settings opacity&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To change the cursor shape, you can execute the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings cursor-shape I-Beam&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or to find out what other options are supported:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings range org.pantheon.terminal.settings cursor-shape&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you use gsettings to set these options, the changes are applied immediately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change the various colors that are used in Terminal with the palette option, have a look at this setting:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.pantheon.terminal.settings palette&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative to using gsettings for changing these settings is the graphical user interface tool dconf-editor.&lt;br&gt;&#xA;In elementary OS, dconf-editor is not installed by default however.&lt;br&gt;&#xA;So, if you want to use this method, you may have to install the package using either &lt;em&gt;Software Center&lt;/em&gt; or by running this in Terminal:   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start dconf-editor and go to:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;org &amp;gt; pantheon &amp;gt; terminal &amp;gt; settings&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you can set the transparency using the &lt;em&gt;opacity&lt;/em&gt; option or change the cursor shape by selecting a different value for &lt;em&gt;cursor-shape&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="1247" LastEditorUserId="1247" LastEditDate="2015-09-03T12:09:19.243" LastActivityDate="2015-09-03T12:09:19.243" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1756" PostTypeId="5" CreationDate="2015-09-03T12:52:09.000" Score="0" Body="&lt;p&gt;For the default music player (called &lt;a href=&quot;https://launchpad.net/noise&quot; rel=&quot;nofollow&quot;&gt;Noise&lt;/a&gt; but known as simply &quot;Music&quot; in elementary OS), use the tag &lt;a href=&quot;/questions/tagged/pantheon-music&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;pantheon-music&amp;#39;&quot; rel=&quot;tag&quot;&gt;pantheon-music&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-09-03T18:11:34.740" LastActivityDate="2015-09-03T18:11:34.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1757" PostTypeId="4" CreationDate="2015-09-03T12:52:09.000" Score="0" Body="Questions about music files (mp3, ogg) or applications." OwnerUserId="84" LastEditorUserId="84" LastEditDate="2015-09-03T18:11:54.083" LastActivityDate="2015-09-03T18:11:54.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1758" PostTypeId="2" ParentId="1754" CreationDate="2015-09-03T13:00:56.760" Score="16" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1359054&quot;&gt;Here&lt;/a&gt; a bug has been filed regarding this issue. There are many workarounds suggested on the page. I suggest you go and give it a read.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;TLDR;&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;(&lt;strong&gt;warning&lt;/strong&gt;: might not work in all cases, if so read the page for other solutions)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using dconf editor, you can change the lid closing settings:&#xA;&lt;br/&gt;&#xA;First install dconf editor using &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf editor -&amp;gt; org -&amp;gt; gnome -&amp;gt; settings daemon -&amp;gt; plugins -&amp;gt; power&#xA;&#xA;-&amp;gt; lid-close-ac-action&#xA;-&amp;gt; lid-close-battery-action&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user922" LastEditorDisplayName="user922" LastEditDate="2015-09-03T13:53:40.043" LastActivityDate="2015-09-03T13:53:40.043" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1761" PostTypeId="2" ParentId="1281" CreationDate="2015-09-03T14:01:16.853" Score="0" Body="&lt;p&gt;After many trials of upgrading to Bluez5 I would strongly recommend not upgrading yet, there are too many issues for a stable system. Still having said that, here is what you will get at present if you will to upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the above PPA from vidplace7 and perform the usual process;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-add-repository ppa:vidplace7/bluez&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then update the software lists:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then upgrade your installed software:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At this point, apt will probably hang on unpacking the new Bluez5 package. There is nothing you can do at this point, hard shutdown the computer and reboot.&#xA;After rebooting, you will need to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will unlock apt... Then you will need to open the file manager as root  and navigate to /var/lib/dpkg/info/, then delete every file that starts with bluez. Once you do that, open the terminal and run the upgrade command again.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This time it should install the new Bluez5 packages. Note: because the ppa is update very often, every time you upgrade your software it will hang at the unpacking of the new Bluez5 package. So you will need to delete all of the bluez files in /var/lib/dpkg/info/ again.  To avoid this issue, just type Software &amp;amp; Update in Slingshot, find the ppa and un-check the ppa to disable it. You can then run it every once and a while or as needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, the Bluetooth indicator will no longer function  so you will need to install Blueman version 2.0&gt; , if you are on a 64Bit  system, use this one: &lt;a href=&quot;http://ftp.us.debian.org/debian/pool/main/b/blueman/blueman_2.0-1_amd64.deb&quot; rel=&quot;nofollow&quot;&gt;http://ftp.us.debian.org/debian/pool/main/b/blueman/blueman_2.0-1_amd64.deb&lt;/a&gt;&#xA;Once this is all setup, you should be able to pair and use the latest &quot;Smart&quot; bluetooth mice using Blueman to set them up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All Bluetooth A2DP (Audio sync) capabilities will be lost, because Pulse Audio for Bluez5 is not yet available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go through all fo this and it does not work for you, just delete the ppa and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bluez&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the system hangs again, jsut delete the files in /var/lib/dpkg/info that start with &quot;bluez&quot; and try again. once that is done, run:&#xA;sudo apt update &amp;amp; sudo apt upgrade  just to make sure everything is working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then reinstall bluez and indicator using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install bluez&#xA;&#xA;sudo apt install indicator-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should restore your system to previous state.&lt;/p&gt;&#xA;" OwnerUserId="349" LastActivityDate="2015-09-03T14:01:16.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1762" PostTypeId="1" CreationDate="2015-09-03T17:37:19.767" Score="2" ViewCount="1096" Body="&lt;p&gt;I have a weird issue. I installed elementary OS Freya last night. Long story short, I got tired of the issues I had with Windows 10 upgrade and decided to take the plunge. When I installed elementary OS, I chose to encrypt my hard drive as I use this laptop for work. Everything went great until I plugged in my second hard drive and tried to boot. I use a SSD drive for my main operating drive and a platter drive for storage. When I try to boot with both hard drives plugged in, after bios splash screen, the screen just goes to black. no logo, no encryption login, nothing. I left it for almost an hour last night just thinking it may work itself through it, but nothing. as soon as I unplugged the secondary sata drive and did a hard reset, it booted right up no problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I plug in the drive while elementary OS is running, it shows right up and I have full access. I can do this short term, but in the long run, I cannot keep this up when I have a perfectly serviceable bay to keep the drive in. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help and let me know any info you may need!!&lt;/p&gt;&#xA;" OwnerUserId="1252" LastEditorUserId="34" LastEditDate="2015-09-05T16:04:32.453" LastActivityDate="2015-09-27T03:03:32.453" Title="My Boot freezes if my secondary drive is plugged in - Freya" Tags="|release-freya|boot|ssd|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1764" PostTypeId="1" AcceptedAnswerId="1766" CreationDate="2015-09-03T19:26:28.217" Score="7" ViewCount="3316" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;At the heart of this upgrade is the latest Hardware Enablement stack&#xA;  from Ubuntu 14.04.3. It includes version &lt;strong&gt;3.19&lt;/strong&gt; of the Linux kernel and&#xA;  an updated Mesa that fixes the dreaded “double cursor” glitch.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -a&#xA;Linux alex0007 3.16.0-48-generic #64~14.04.1-Ubuntu SMP Thu Aug 20 23:03:57 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="760" LastActivityDate="2015-09-04T15:24:12.150" Title="Kernel version is still 3.16 on Freya 0.3.1" Tags="|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1765" PostTypeId="1" AcceptedAnswerId="1767" CreationDate="2015-09-03T19:33:27.653" Score="1" ViewCount="1275" Body="&lt;p&gt;I would like to use the refresh icon in my application. Rather than creating my own icon I would like to use the refresh icon used in Files, in a way that the icon will be updated when the user uses a different theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the refresh icon in this path &quot;/usr/share/icons/HighContrast/16x16/actions/view-refresh.png&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, instead of using the hardcoded path in the code I would like to use a reference path or alias to the above icon which will show the default refresh icon based on the theme in use. In case the image cannot be located I can default to a hard coded image which will be kept in my application default icon location.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate any sample vala code or pointers to implement the above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Sid.&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="45" LastEditDate="2015-09-03T22:29:20.853" LastActivityDate="2015-09-03T22:29:20.853" Title="How can I use a system icon in my application?" Tags="|programming|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1766" PostTypeId="2" ParentId="1764" CreationDate="2015-09-03T19:47:52.560" Score="8" Body="&lt;p&gt;From the official elementary blog:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you’re already running Freya, you will already have received all of the above (with the exception of the newly added hardware support) in your regular updates. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you really need kernel 3.19 try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-generic-lts-vivid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="169" LastActivityDate="2015-09-03T19:47:52.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1767" PostTypeId="2" ParentId="1765" CreationDate="2015-09-03T20:34:36.617" Score="6" Body="&lt;p&gt;You just load the icon using the name. Gtk will select the one appropriate for the current theme. In your case, you would use something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var icon = Gtk.Image.from_icon_name(&quot;view-refresh&quot;, Gtk.IconSize.SMALL_TOOLBAR);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;http://references.valadoc.org/#!api=gtk+-3.0/Gtk.Image.Image.from_icon_name&quot;&gt;valadoc&lt;/a&gt; for more information.&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-09-03T20:34:36.617" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1769" PostTypeId="2" ParentId="1740" CreationDate="2015-09-03T21:02:53.663" Score="3" Body="&lt;p&gt;You can use &quot;GTK Theme Variant Switcher&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Description:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A small service which forces certain windows to use a specific Gtk theme variant. E.g. force dark window borders.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;More info about installation and configuration on &lt;a href=&quot;https://github.com/theblacklion/gtk-theme-variant-switcher&quot; rel=&quot;nofollow&quot;&gt;GitHub&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="1009" LastEditorUserId="160" LastEditDate="2015-09-04T15:04:22.987" LastActivityDate="2015-09-04T15:04:22.987" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1771" PostTypeId="2" ParentId="1702" CreationDate="2015-09-04T02:09:10.933" Score="5" Body="&lt;p&gt;&lt;em&gt;I found this solution for Ubuntu, which in theory should work in Freya too.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First install some packages related to PulseAudio (a sound API used by elementary) by typing the following in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pulseaudio-module-raop pulseaudio-module-zeroconf paprefs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then start the PulseAudio preferences by typing &lt;code&gt;paprefs&lt;/code&gt; and check the two options under Network Access. &lt;a href=&quot;http://2.bp.blogspot.com/-pNUxDzTpBgw/TWc9qmg-BqI/AAAAAAAABFQ/FRL7xQroHFs/s1600/paprefsNetwork.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;The window could look similar to this screenshot.&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot your system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the sound indicator and open the sound settings (&lt;a href=&quot;http://oliverj.bplaced.net/img/elemos/settings_sound.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;example screenshot&lt;/a&gt;). With a bit of luck you can now select your AirPlay device from the list of available outputs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Based on answer to &lt;a href=&quot;https://askubuntu.com/a/438731/413066&quot;&gt;&quot;Is there a way to stream audio/video to an Apple Airplay Device?&quot;&lt;/a&gt;, created by StackExchange contributors.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-04T02:09:10.933" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1772" PostTypeId="2" ParentId="1731" CreationDate="2015-09-04T02:43:52.673" Score="2" Body="&lt;p&gt;This is supposed to prevent the system from resetting keyboard settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.keyboard active false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Better reboot first to check if it works.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that does not work, check out this question (which provides some attempts to permamently change xkb options) and its answers on AskUbuntu: &lt;a href=&quot;https://askubuntu.com/questions/451945/permanently-set-keyboard-layout-options-with-setxkbmap-in-gnome-unity&quot;&gt;&quot;Permanently set keyboard layout options with setxkbmap in gnome/unity&quot;&lt;/a&gt; (elementary is neither Gnome nor Unity, but it should work similar in the backend.)&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-04T02:43:52.673" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1773" PostTypeId="2" ParentId="1708" CreationDate="2015-09-04T03:05:29.247" Score="2" Body="&lt;p&gt;Make sure your system is up-to-date first (there have been updates related to language settings recently):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to System Settings &gt; Language &amp;amp; Region (&lt;a href=&quot;http://lmelinux.net/wp-content/uploads/sites/2/2015/08/elementary-0.3.1-language-ui.png&quot; rel=&quot;nofollow&quot;&gt;example screenshot&lt;/a&gt;), click on English in the left sidebar and then &quot;Set System Language&quot;. You will likely have to enter your password to proceed.&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-09-04T03:05:29.247" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1775" PostTypeId="1" CreationDate="2015-09-04T08:47:10.300" Score="6" ViewCount="803" Body="&lt;p&gt;I've been running Freya since beta1, keeping it updated until today. Now,  taking advantage of the 0.3.1 update, I want to perform a clean install. How do I go about doing this and backing up my data beforehand? &#xA;I'd like the best answer to be a comprehensive guide which takes into account the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;backup/restore personal files&lt;/li&gt;&#xA;&lt;li&gt;backup/restore installed applications: possible? advisable? &lt;/li&gt;&#xA;&lt;li&gt;backup/restore system configurations: advisable? &lt;/li&gt;&#xA;&lt;li&gt;move /home to a separate partition: pros/cons?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My goal is to find a good balance between keeping my files and apps and enjoying the new features introduced by the devs with the newest updates. &lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2021-03-13T20:19:44.323" Title="Clean install + backup options" Tags="|system-installation|backup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1776" PostTypeId="1" AcceptedAnswerId="1884" CreationDate="2015-09-04T10:35:36.137" Score="16" ViewCount="15886" Body="&lt;p&gt;Boot into the system in UEFI mode failed.. Why does 0.3 support UEFI but 0.3.1 doesn't?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Bug Reports:&lt;/strong&gt;&lt;br&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1493099&quot; rel=&quot;noreferrer&quot;&gt;0.3.1 UEFI / Secure Boot support incompatible&lt;/a&gt;&lt;br&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;noreferrer&quot;&gt;Freya UEFI install boots to grub prompt&lt;/a&gt;&#xA;&lt;br&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492256&quot; rel=&quot;noreferrer&quot;&gt;I can't boot into my system after a fresh install for 0.3.1 in UEFI mode&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Screenshots:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ySBYP.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ySBYP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CDfj3.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CDfj3.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="26" LastEditDate="2015-09-16T10:03:40.260" LastActivityDate="2015-12-10T01:52:19.693" Title="How can I fix a secure boot failing to grub when I installed 0.3.1?" Tags="|release-freya|system-installation|uefi|live-cd|grub|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="1777" PostTypeId="1" CreationDate="2015-09-04T10:46:06.187" Score="4" ViewCount="607" Body="&lt;p&gt;I constantly switch between open windows. The &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;TAB&lt;/kbd&gt; switcher is too slow. Is it possible to integrate a classic-styled &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;TAB&lt;/kbd&gt; switcher? It could be an option in System Settings.&lt;/p&gt;&#xA;" OwnerUserId="2268" LastEditorUserId="3757" LastEditDate="2016-05-07T04:28:42.583" LastActivityDate="2016-05-07T04:28:42.583" Title="Classic Alt-Tab switcher animation" Tags="|gala|" AnswerCount="0" CommentCount="3" ClosedDate="2015-09-05T04:43:09.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="1780" PostTypeId="2" ParentId="1775" CreationDate="2015-09-04T14:13:54.837" Score="3" Body="&lt;p&gt;In my experience there is no single perfect solution for automated installation and backups. Every approach is usually quite customized to the needs and likes of the respective user. That said, I can only explain the way I handle things and hope you find some of the ideas useful...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are several solutions for automation (like &lt;a href=&quot;https://en.wikipedia.org/wiki/Chef_%28software%29%20Chef&quot; rel=&quot;nofollow&quot;&gt;Chef&lt;/a&gt;, &lt;a href=&quot;https://en.wikipedia.org/wiki/Ansible_%28software%29%20Ansible&quot; rel=&quot;nofollow&quot;&gt;Ansible&lt;/a&gt; or &lt;a href=&quot;https://en.wikipedia.org/wiki/Puppet_%28software%29%20Puppet&quot; rel=&quot;nofollow&quot;&gt;Puppet&lt;/a&gt;) but for personal use (i.e. small scale) I prefer simple Shell scripts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that there are four important categories that need automation/backup:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;configuration data (your dotfiles, application config, dconf settings, etc)&lt;/li&gt;&#xA;&lt;li&gt;applications (packages, additional repositories, other binaries etc)&lt;/li&gt;&#xA;&lt;li&gt;personal data (pictures, documents, music, books etc)&lt;/li&gt;&#xA;&lt;li&gt;security-relevant data (e.g. ssh keys)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'll explain briefly how I handle each of those.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;configuration data&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I prefer to have this inside a version control system in order to easily track or undo changes if need be. I keep everything in a public GitHub repository and have some scripts to put them into place. Have a &lt;a href=&quot;https://github.com/dsager/dotfiles&quot; rel=&quot;nofollow&quot;&gt;look&lt;/a&gt; at it and copy whatever you think is useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;applications&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the same repository I have some scripts to install basic packages, add additional repositories or download other 3rd party applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;personal data&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a separate partition holding this kind of data. For some directories (like &lt;code&gt;~/Documents&lt;/code&gt;) I create a symbolic link (can be automated with a simple Shell script). Furthermore you should have a backup of this stuff in another place, for example in the cloud (I'm using Google Drive &amp;amp; Dropbox) or on a external hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;security-relevant data&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Obviously you don't want to make this private stuff public nor trust it to a company like Google or Dropbox. So I just keep a backup on an encrypted USB drive or SD-card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With these precautions I am able to re-install the OS and setup my environment in a couple of hours. Every time you do this you will find things to improve, so consider it a constant work in progress.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope you find this helpful, just ask if you want to know anything in particular. An of course I appreciate any feedback on how to improve this ;)&lt;/p&gt;&#xA;" OwnerUserId="81" LastActivityDate="2015-09-04T14:13:54.837" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1781" PostTypeId="2" ParentId="1764" CreationDate="2015-09-04T15:13:38.273" Score="7" Body="&lt;p&gt;You can &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot;&gt;update kernel and mesa&lt;/a&gt; without reinstall the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter following command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you run a multiarch desktop (for example, i386 and amd64 on amd64, for gaming or Wine), you may find you need a slightly more involved command, like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid libgl1-mesa-glx-lts-vivid libgl1-mesa-glx-lts-vivid:i386 libglapi-mesa-lts-vivid:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Warning!&lt;/strong&gt; Be careful and attentive to this, the system can fail. Check packages that will be removed before pressing &lt;kbd&gt;Y&lt;/kbd&gt;. In my case, everything went well and it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;maxim@ProBook:~$ sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following extra packages will be installed:&#xA;  libegl1-mesa-lts-vivid libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;  libgl1-mesa-glx-lts-vivid libglapi-mesa-lts-vivid libgles1-mesa-lts-vivid&#xA;  libgles2-mesa-lts-vivid libllvm3.6 libxatracker2-lts-vivid&#xA;  linux-headers-3.19.0-25 linux-headers-3.19.0-25-generic&#xA;  linux-headers-generic-lts-vivid linux-image-3.19.0-25-generic&#xA;  linux-image-extra-3.19.0-25-generic linux-image-generic-lts-vivid&#xA;  xserver-xorg-input-evdev-lts-vivid xserver-xorg-input-mouse-lts-vivid&#xA;  xserver-xorg-input-synaptics-lts-vivid xserver-xorg-input-vmmouse-lts-vivid&#xA;  xserver-xorg-input-wacom-lts-vivid xserver-xorg-video-ati-lts-vivid&#xA;  xserver-xorg-video-cirrus-lts-vivid xserver-xorg-video-fbdev-lts-vivid&#xA;  xserver-xorg-video-intel-lts-vivid xserver-xorg-video-mach64-lts-vivid&#xA;  xserver-xorg-video-mga-lts-vivid xserver-xorg-video-neomagic-lts-vivid&#xA;  xserver-xorg-video-nouveau-lts-vivid xserver-xorg-video-openchrome-lts-vivid&#xA;  xserver-xorg-video-r128-lts-vivid xserver-xorg-video-radeon-lts-vivid&#xA;  xserver-xorg-video-savage-lts-vivid&#xA;  xserver-xorg-video-siliconmotion-lts-vivid&#xA;  xserver-xorg-video-sisusb-lts-vivid xserver-xorg-video-tdfx-lts-vivid&#xA;  xserver-xorg-video-trident-lts-vivid xserver-xorg-video-vesa-lts-vivid&#xA;  xserver-xorg-video-vmware-lts-vivid&#xA;Suggested packages:&#xA;  fdutils linux-lts-vivid-tools xfonts-100dpi xfonts-75dpi&#xA;  gpointing-device-settings touchfreeze firmware-linux&#xA;Recommended packages:&#xA;  libegl1-mesa-drivers-lts-vivid&#xA;The following packages will be REMOVED:&#xA;  libegl1-mesa-drivers-lts-utopic libegl1-mesa-lts-utopic libgbm1-lts-utopic&#xA;  libgl1-mesa-dri-lts-utopic libgl1-mesa-glx-lts-utopic&#xA;  libglapi-mesa-lts-utopic libgles1-mesa-lts-utopic libgles2-mesa-lts-utopic&#xA;  libopenvg1-mesa-lts-utopic libwayland-egl1-mesa-lts-utopic&#xA;  libxatracker2-lts-utopic xserver-xorg-core-lts-utopic&#xA;  xserver-xorg-input-all-lts-utopic xserver-xorg-input-evdev-lts-utopic&#xA;  xserver-xorg-input-mouse-lts-utopic xserver-xorg-input-synaptics-lts-utopic&#xA;  xserver-xorg-input-vmmouse-lts-utopic xserver-xorg-input-wacom-lts-utopic&#xA;  xserver-xorg-lts-utopic xserver-xorg-video-all-lts-utopic&#xA;  xserver-xorg-video-ati-lts-utopic xserver-xorg-video-cirrus-lts-utopic&#xA;  xserver-xorg-video-fbdev-lts-utopic xserver-xorg-video-intel-lts-utopic&#xA;  xserver-xorg-video-mach64-lts-utopic xserver-xorg-video-mga-lts-utopic&#xA;  xserver-xorg-video-modesetting-lts-utopic&#xA;  xserver-xorg-video-neomagic-lts-utopic xserver-xorg-video-nouveau-lts-utopic&#xA;  xserver-xorg-video-openchrome-lts-utopic xserver-xorg-video-r128-lts-utopic&#xA;  xserver-xorg-video-radeon-lts-utopic xserver-xorg-video-savage-lts-utopic&#xA;  xserver-xorg-video-siliconmotion-lts-utopic&#xA;  xserver-xorg-video-sisusb-lts-utopic xserver-xorg-video-tdfx-lts-utopic&#xA;  xserver-xorg-video-trident-lts-utopic xserver-xorg-video-vesa-lts-utopic&#xA;  xserver-xorg-video-vmware-lts-utopic&#xA;The following NEW packages will be installed:&#xA;  libegl1-mesa-lts-vivid libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;  libgl1-mesa-glx-lts-vivid libglapi-mesa-lts-vivid libgles1-mesa-lts-vivid&#xA;  libgles2-mesa-lts-vivid libllvm3.6 libwayland-egl1-mesa-lts-vivid&#xA;  libxatracker2-lts-vivid linux-generic-lts-vivid linux-headers-3.19.0-25&#xA;  linux-headers-3.19.0-25-generic linux-headers-generic-lts-vivid&#xA;  linux-image-3.19.0-25-generic linux-image-extra-3.19.0-25-generic&#xA;  linux-image-generic-lts-vivid xserver-xorg-core-lts-vivid&#xA;  xserver-xorg-input-all-lts-vivid xserver-xorg-input-evdev-lts-vivid&#xA;  xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid&#xA;  xserver-xorg-input-vmmouse-lts-vivid xserver-xorg-input-wacom-lts-vivid&#xA;  xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid&#xA;  xserver-xorg-video-ati-lts-vivid xserver-xorg-video-cirrus-lts-vivid&#xA;  xserver-xorg-video-fbdev-lts-vivid xserver-xorg-video-intel-lts-vivid&#xA;  xserver-xorg-video-mach64-lts-vivid xserver-xorg-video-mga-lts-vivid&#xA;  xserver-xorg-video-neomagic-lts-vivid xserver-xorg-video-nouveau-lts-vivid&#xA;  xserver-xorg-video-openchrome-lts-vivid xserver-xorg-video-r128-lts-vivid&#xA;  xserver-xorg-video-radeon-lts-vivid xserver-xorg-video-savage-lts-vivid&#xA;  xserver-xorg-video-siliconmotion-lts-vivid&#xA;  xserver-xorg-video-sisusb-lts-vivid xserver-xorg-video-tdfx-lts-vivid&#xA;  xserver-xorg-video-trident-lts-vivid xserver-xorg-video-vesa-lts-vivid&#xA;  xserver-xorg-video-vmware-lts-vivid&#xA;0 upgraded, 44 newly installed, 39 to remove and 0 not upgraded.&#xA;Need to get 80.5 MB of archives.&#xA;After this operation, 308 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-09-04T15:24:12.150" LastActivityDate="2015-09-04T15:24:12.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1783" PostTypeId="1" CreationDate="2015-09-04T16:27:28.507" Score="0" ViewCount="910" Body="&lt;p&gt;I have a Lenovo z570 where I installed elementary OS. I installed Synaptic driver from X.org and the dependencies. After a reboot, I completely lost the ability to use my trackpad. Sometimes the physical buttons work, but no movement at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would love to roll back to before I installed the driver when I had functionality.&lt;/p&gt;&#xA;" OwnerUserId="1255" LastEditorUserId="45" LastEditDate="2015-09-04T17:22:11.410" LastActivityDate="2015-09-04T17:32:06.830" Title="How can I roll back my touchpad drivers to a previous version?" Tags="|touchpad|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1784" PostTypeId="2" ParentId="1783" CreationDate="2015-09-04T17:32:06.830" Score="1" Body="&lt;p&gt;OK, I followed the instructions &lt;a href=&quot;https://askubuntu.com/questions/367701/touchpad-stopped-working-out-of-the-blue&quot;&gt;here&lt;/a&gt; to reinstall the kernel and it is working great. I messed up installing the drivers from xorg and should not have as the functionality was already built into the kernel, I was just not understanding how! Thanks for all who read my question and were trying to help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/367701/touchpad-stopped-working-out-of-the-blue&quot;&gt;https://askubuntu.com/questions/367701/touchpad-stopped-working-out-of-the-blue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1255" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-04T17:32:06.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1785" PostTypeId="1" AcceptedAnswerId="1786" CreationDate="2015-09-04T18:03:14.440" Score="4" ViewCount="937" Body="&lt;p&gt;I've had success opening files from the command line if I know the program used to view the file.  If I need to open a .pdf I can call &lt;code&gt;evince filename&lt;/code&gt;.  What do you do if you don't know which program name opens a certain file type?  Say I have a powerpoint slides I want to open?  Is there a generic way in elementary OS freya to open files similar to Mac's &lt;code&gt;open&lt;/code&gt; command?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need a specific program name to open various types of files, is there a way on the command line to figure out what program will run what file type?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-09-04T18:29:07.367" Title="How do you open files from the command line without knowing the specific program name for the file?" Tags="|command-line|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1786" PostTypeId="2" ParentId="1785" CreationDate="2015-09-04T18:29:07.367" Score="7" Body="&lt;p&gt;Yes there is, it's called &lt;code&gt;xdg-open&lt;/code&gt; and should be installed by default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read more about it in &lt;a href=&quot;https://wiki.archlinux.org/index.php/Xdg-open&quot;&gt;ArchWiki&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;xdg-open is a desktop-independent tool for configuring the default applications of a user. Many applications invoke the xdg-open command internally.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Inside a desktop environments like GNOME, KDE, or Xfce), xdg-open simply passes the arguments to those desktop environment's file-opener application (eg. gvfs-open, kde-open, or exo-open). which means that the associations are left up to the desktop environment. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-09-04T18:29:07.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1787" PostTypeId="1" AcceptedAnswerId="1865" CreationDate="2015-09-04T20:32:43.503" Score="2" ViewCount="855" Body="&lt;p&gt;I just installed elementary OS 0.3.1 in a VirtualBox 4.3.12 (using MacOS X 10.9.5 as a host), installed the guest additions (I had to mount the CD manually and execute the &lt;code&gt;.run&lt;/code&gt; script manually) but the screen resolution is still at 640x400. The vbox kernel module seems to be loaded:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; johannes@johannes-VirtualBox:~$ lsmod | grep vbox&#xA; vboxguest             249856  5 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Am I missing something obvious? Should I maybe upgrade my VirtualBox host software?&lt;/p&gt;&#xA;" OwnerUserId="2275" LastEditorUserId="84" LastEditDate="2015-09-05T09:36:31.413" LastActivityDate="2015-11-27T10:57:45.550" Title="Change resolution in VirtualBox" Tags="|virtualbox|resolution|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1789" PostTypeId="1" CreationDate="2015-09-04T22:28:40.150" Score="2" ViewCount="37" Body="&lt;p&gt;My audio keeps turning off unless there is a sound playing. I'm using a GTX 670 using HDMI to my monitor. Is this a power saving feature? If so, how can I turn it off?&lt;/p&gt;&#xA;" OwnerDisplayName="user2277" LastEditorUserId="84" LastEditDate="2015-09-05T16:04:15.780" LastActivityDate="2015-09-05T16:04:15.780" Title="Audio powering off for GTX 670" Tags="|sound|power|" AnswerCount="0" CommentCount="4" ClosedDate="2016-10-09T00:27:05.200" ContentLicense="CC BY-SA 3.0" />
  <row Id="1790" PostTypeId="2" ParentId="1741" CreationDate="2015-09-04T23:19:21.083" Score="5" Body="&lt;p&gt;Here is an approach to integrating deja-dup with Files. I found in the following blogpost from Todd Kennedy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://todd1215.blogspot.com.au/2014/02/adding-deja-dup-support-to-pantheon.html&quot; rel=&quot;noreferrer&quot; title=&quot;Permalink to Adding Deja-dup support to Pantheon !&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Adding Deja-dup support to Files&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Obviously, install deja-dup. In order to integrate Deja-Dup into Files one has to create two files; the first for restoring missing files from a directory and the second to revert to a previous version of a file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dejadup-restore.contract, that must be created in /usr/share/contractor with Admin permissions. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]  &#xA;Name=Restore missing files in folder  &#xA;Icon=edit-find  &#xA;Description=Restores missing files in folder using dejadup  &#xA;MimeType=inode/directory  &#xA;Exec=deja-dup --restore-missing %U  &#xA;Gettext-Domain=deja-dup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and exit editing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The  dejadup-revert.contract in the same way that you created the first file. Put the following contents into it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]  &#xA;Name=Revert to previous version...  &#xA;Description=Revert to a previous version  &#xA;Icon=edit-find  &#xA;MimeType=application/octet-stream  &#xA;Exec=deja-dup --restore %U  &#xA;Gettext-Domain=deja-dup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and exit editing.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log-off and log-on. &lt;/p&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-09-04T23:19:21.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1791" PostTypeId="1" CreationDate="2015-09-04T23:44:30.250" Score="2" ViewCount="194" Body="&lt;p&gt;Here's how they are supposed to look.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://2.bp.blogspot.com/-CVU3FedL-fE/UdmHn9hPJ3I/AAAAAAAAA6A/AT_FQ3XYunM/s400/preview.png&quot; alt=&quot;one&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ijenl.png&quot; alt=&quot;two&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how they look&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ExMtl.jpg&quot; alt=&quot;my desktop&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The middle one's supposed to be the breaking bad widget but the lines don't show and the right one's supposed to look like the first picture but again the designs don't show up. What could be the issue?&lt;/p&gt;&#xA;" OwnerUserId="2279" LastEditorUserId="8517" LastEditDate="2019-01-02T23:27:05.263" LastActivityDate="2019-01-02T23:27:05.263" Title="Drawings, clocks and other designs not showing up on conky, only text is being shown" Tags="|desktop|conky|" AnswerCount="0" CommentCount="1" ClosedDate="2015-09-06T20:40:38.207" ContentLicense="CC BY-SA 4.0" />
  <row Id="1792" PostTypeId="2" ParentId="1724" CreationDate="2015-09-05T00:00:09.340" Score="5" Body="&lt;p&gt;Pretty simple answer for this one. In order to the data be deleted with the removal of the user, one has to click on the delete user (small minus sign at the bottom of the user administration settings) instead of simply blocking the user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it. &lt;/p&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-09-05T00:00:09.340" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1793" PostTypeId="1" AcceptedAnswerId="1874" CreationDate="2015-09-05T00:49:44.233" Score="6" ViewCount="1110" Body="&lt;p&gt;I have elementary Freya 0.3 installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I upgrade it fully, do I get Freya 0.3.1 (the &lt;em&gt;same one&lt;/em&gt; that can be downloaded) or do I end up with some half-breed between these two?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;a href=&quot;http://blog.elementary.io/post/128271333121/freya-031-is-here&quot;&gt;announcement&lt;/a&gt; of v0.3.1 someone &lt;a href=&quot;http://blog.elementary.io/post/128271333121/freya-031-is-here#comment-2234432203&quot;&gt;commented&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;If you’re already running Freya, you will already have received all&#xA;  of the above (with the exception of the newly added hardware support)&#xA;  in your regular updates.&quot;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;This is slightly confusing. Does that mean that newly added hardware&#xA;  support requires a new install or just an additional update?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;to which Daniel responded:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A transitional package should be made available at some point in the&#xA;  future, but for now I would highly recommend a clean install as the&#xA;  best upgrade method.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This answer seems to imply that simply upgrading Freya 0.3 &lt;em&gt;does not&lt;/em&gt; in fact result in the same system as a clean 0.3.1 install.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2015-09-05T15:11:46.060" LastActivityDate="2015-10-06T17:38:42.480" Title="Does upgrading elementary OS Freya (0.3) result in 0.3.1?" Tags="|release-freya|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1795" PostTypeId="1" AcceptedAnswerId="1806" CreationDate="2015-09-05T03:22:47.710" Score="3" ViewCount="293" Body="&lt;p&gt;Every time I log out or shutdown Elementary OS Freya 0.3.1 after login and starting chrome 45.0.2454.85, chrome errors saying it did not shutdown correctly and I have to restore my tabs instead of them auto loading. Anyone know how to troubleshoot or resolve this issue?&lt;/p&gt;&#xA;" OwnerUserId="870" LastActivityDate="2016-04-02T01:39:07.170" Title="Chrome does not shut down correctly" Tags="|release-freya|applications|google-chrome|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1797" PostTypeId="1" CreationDate="2015-09-05T05:39:53.137" Score="1" ViewCount="10" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FVb8R.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FVb8R.png&quot; alt=&quot;Before system settings is closed&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click the keyboard configuration, The system settings was closed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9ORB3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9ORB3.png&quot; alt=&quot;Segmentation error?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/usr/bin/gnome-control-center: line 20:  4487 Segmentation error (core dumped) switchboard $switchboard_options $requested_plug&lt;/p&gt;&#xA;" OwnerUserId="2282" LastActivityDate="2015-09-05T05:39:53.137" Title="can not enter keyboard configuration" Tags="|release-freya|settings|keyboard|" AnswerCount="0" CommentCount="1" ClosedDate="2015-09-05T12:34:13.280" ContentLicense="CC BY-SA 3.0" />
  <row Id="1798" PostTypeId="2" ParentId="1793" CreationDate="2015-09-05T06:03:33.677" Score="0" Body="&lt;p&gt;If you upgrade your system via Software Updater or apt-get dist-upgrade, the bugs won't be fixed, like the double cursor bug, so I suggest you to do a fresh install.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="26" LastEditDate="2015-09-08T08:03:50.197" LastActivityDate="2015-09-08T08:03:50.197" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1806" PostTypeId="2" ParentId="1795" CreationDate="2015-09-05T09:00:03.200" Score="2" Body="&lt;p&gt;Chrome/ixium always run on background by default. So, when you restart session, it try to restore old tabs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to turn off backgrounds pages and apps as described in &lt;a href=&quot;https://support.google.com/chrome/answer/1184722?hl=en&quot; rel=&quot;nofollow&quot;&gt;Chrome Help&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="26" LastEditDate="2016-01-02T18:24:46.623" LastActivityDate="2016-01-02T18:24:46.623" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1807" PostTypeId="1" AcceptedAnswerId="3121" CreationDate="2015-09-05T09:59:08.250" Score="4" ViewCount="862" Body="&lt;p&gt;I would like to update just the base of elementary system and not the all installed apps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can run &lt;code&gt;sudo apt-get install package-name&lt;/code&gt; to upgrade the package if it is already installed. Whereas I can also run &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; to upgrade all the packages. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to upgrade just the elementary OS and no other app installed later on. Such as Noise(Music) &lt;em&gt;should be&lt;/em&gt; upgraded VLC &lt;em&gt;should not&lt;/em&gt;. How do I accomplish this?&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="578" LastEditDate="2017-02-11T19:14:41.290" LastActivityDate="2017-02-11T19:14:41.290" Title="How to prevent updating of a specific package?" Tags="|updates|applications|command-line|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1808" PostTypeId="1" AcceptedAnswerId="1809" CreationDate="2015-09-05T11:07:25.307" Score="1" ViewCount="273" Body="&lt;p&gt;I tried to install newest HWE stack to get rid of the double cursor bug. As suggested in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1781/2283&quot;&gt;here&lt;/a&gt; I ran the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-vivid xserver-xorg-core-lts-vivid xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid xserver-xorg-input-all-lts-vivid libwayland-egl1-mesa-lts-vivid &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which resulted in tons of unmet dependencies / broken packages.  &lt;a href=&quot;http://pastebin.com/t7BS8H62&quot; rel=&quot;nofollow noreferrer&quot;&gt;Full log.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do bar clean install?&lt;/p&gt;&#xA;" OwnerUserId="2283" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-05T11:57:26.327" Title="Can't install newest hardware-enablement stack" Tags="|release-freya|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1809" PostTypeId="2" ParentId="1808" CreationDate="2015-09-05T11:52:45.120" Score="4" Body="&lt;p&gt;This happens because you are using applications with 32bit libraries (like Skype, Wine, Steam).&lt;br&gt;&#xA;Uninstall all 32bit based software and try to upgrade your HWE-stack again, it should work now. &lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-09-05T11:52:45.120" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1810" PostTypeId="2" ParentId="1808" CreationDate="2015-09-05T11:57:26.327" Score="0" Body="&lt;p&gt;I solved this issue by purging all the *lts-utopic packages before upgrading again.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-05T11:57:26.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1812" PostTypeId="1" CreationDate="2015-09-05T14:29:07.620" Score="6" ViewCount="273" Body="&lt;p&gt;I was looking for a distribution to install a Linux system after a couple of years, and I really liked elementary OS!&lt;br&gt;&#xA;But I was reading about it and it is based on Ubuntu, which is based on Debian.&lt;br&gt;&#xA;And on the Debian page there is a bunch of security updates for applications, and I was wondering if elementary OS also has these updates.&lt;/p&gt;&#xA;" OwnerUserId="2285" LastEditorUserId="34" LastEditDate="2015-09-14T09:39:15.800" LastActivityDate="2015-09-14T09:39:15.800" Title="Does elementary receive Debian's security update?" Tags="|updates|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1814" PostTypeId="1" AcceptedAnswerId="1817" CreationDate="2015-09-05T15:01:08.427" Score="1" ViewCount="257" Body="&lt;p&gt;I have an elementary laptop that has an Intel Quad-Core i3-3217U CPU (1.80GHz) processor. I would like to get all four of my processor cores displayed in my Conky. Is there commands for certain info that I need or is it a straightforward thing that I'm overcomplicating? Also if anyone could let me know how to start Conky on boot I would be grateful. I am fairly new to Linux, so the more detailed and novice-friendly the better. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="663" LastActivityDate="2015-09-05T16:06:20.120" Title="How to get my elementary laptop to show my quad-core CPU info?" Tags="|release-freya|cpu|laptop|conky|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1815" PostTypeId="1" CreationDate="2015-09-05T15:10:20.297" Score="-1" ViewCount="519" Body="&lt;p&gt;I want to install elementary OS within VMware Workstation Pro 12. I have configured the elementary disk to be on a usb my passport drive. At the end of the installation I get the error: grub pc cannot be installed. My host OS is Windows 8.1 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for support&lt;/p&gt;&#xA;" OwnerUserId="2287" LastEditorUserId="179" LastEditDate="2015-09-05T20:06:07.147" LastActivityDate="2015-09-07T11:42:01.940" Title="grub pc cannot be installed" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2015-09-16T09:59:39.187" ContentLicense="CC BY-SA 3.0" />
  <row Id="1816" PostTypeId="1" AcceptedAnswerId="1818" CreationDate="2015-09-05T15:44:12.223" Score="3" ViewCount="581" Body="&lt;p&gt;I like to use &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; (the default shortcut for &quot;Switch Windows&quot;) inside a particular program¹.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a result, I would like to use &lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; and &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; to switch windows instead. I've already modified the &quot;Switch Windows&quot; and &quot;Switch Windows backwards&quot; keyboard shortcuts in System Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/VwGvq.png&quot; alt=&quot;Switch Windows key bindings&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This causes the new &lt;kbd&gt;Win&lt;/kbd&gt; shortcuts to switch windows, but the old &lt;kbd&gt;Alt&lt;/kbd&gt; shortcuts still switch windows as well. My goal is to free these shortcuts from the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to completely unbind &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; and &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; at the OS level?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;¹Not that it's terribly important, but I use this key combination to trigger code completion in Emacs. I'm pretty used to it, and would prefer not to change the binding.&lt;/p&gt;&#xA;" OwnerUserId="2288" LastActivityDate="2015-09-05T16:41:20.043" Title="How can I completely unbind the default &quot;switch windows&quot; keyboard shortcuts?" Tags="|release-freya|keyboard-shortcuts|window-management|gala|" AnswerCount="1" CommentCount="2" ClosedDate="2015-09-06T06:15:18.637" ContentLicense="CC BY-SA 3.0" />
  <row Id="1817" PostTypeId="2" ParentId="1814" CreationDate="2015-09-05T15:57:04.337" Score="2" Body="&lt;p&gt;Sorry to tell you but 3217u is a dual core processor. You can see its specifications at:&#xA;&lt;a href=&quot;http://ark.intel.com/m/products/65697/intel-core-i3-3217u-processor-3m-cache-1_80-ghz#@product/specifications&quot; rel=&quot;nofollow&quot;&gt;Intel i3 3217u&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However you can add some variables to your .conkyrc to see information about your cores. For example, you can add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;${cpu cpuX}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With x=0 to see total CPU usage in percent, and X&gt;=1 to see individual cores.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information about conky variables, you can see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://conky.sourceforge.net/variables.html&quot; rel=&quot;nofollow&quot;&gt;Conky variables&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To start conky on boot you can add it  in Configuration &gt; Applications &gt; Startup .&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2015-09-05T16:06:20.120" LastActivityDate="2015-09-05T16:06:20.120" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1818" PostTypeId="2" ParentId="1816" CreationDate="2015-09-05T16:19:17.410" Score="4" Body="&lt;p&gt;I discovered a workaround via &lt;a href=&quot;https://elementaryos.stackexchange.com/a/185/2288&quot;&gt;this answer&lt;/a&gt; to a related question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, use &lt;code&gt;gsettings&lt;/code&gt; to find the internal configuration setting we wish to change:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep -i switch&#xA;# ...&#xA;# org.gnome.desktop.wm.keybindings switch-applications ['&amp;lt;Super&amp;gt;Tab', '&amp;lt;Alt&amp;gt;Tab']&#xA;# ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, change the individual setting as necessary. In this case:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings switch-applications &quot;['&amp;lt;Super&amp;gt;Tab']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As suggested by Daniel in the comments above, I have &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492611&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported this as a bug&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2288" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-05T16:41:20.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1820" PostTypeId="2" ParentId="1812" CreationDate="2015-09-05T20:06:58.067" Score="6" Body="&lt;p&gt;While Ubuntu is derived from Debian, Ubuntu has its own security team. This team is responsible for security updates to land in the Ubuntu software repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As elementary OS uses the Ubuntu repositories, it's getting security updates from Ubuntu - While it's possible the Ubuntu security team adapts security updates from Debian, Debian security updates are not necessarily in Ubuntu and therefore not in elementary OS either. That does not mean Ubuntu &amp;amp; elementary OS are more insecure than Debian, but sometimes a software's code base is quite different between Ubuntu and Debian - A security update for Debian might not be needed for Ubuntu, for example.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-09-05T20:06:58.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1821" PostTypeId="1" CreationDate="2015-09-05T20:12:42.230" Score="3" ViewCount="537" Body="&lt;p&gt;I know how to import to the noise library, but is there way to remove music that I have already imported, without removing everything?&lt;/p&gt;&#xA;" OwnerUserId="2289" LastActivityDate="2015-09-06T20:24:24.120" Title="How can I remove music that I do not want from noise?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1822" PostTypeId="2" ParentId="1483" CreationDate="2015-09-05T20:24:46.647" Score="3" Body="&lt;p&gt;It seems you've answered your own question. OSS isn't supported in Ubuntu and thus isn't supported in elementary OS. As recommended on that Ubuntu help page, if you really want/need OSS for some reason you should look into Arch Linux or another distro that supports it.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-05T20:24:46.647" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1823" PostTypeId="2" ParentId="1258" CreationDate="2015-09-05T20:50:24.433" Score="1" Body="&lt;p&gt;From this &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1084529&quot; rel=&quot;nofollow&quot;&gt;bug report&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu Software Center relies on Ubuntu code names in order to fetch software purchases. Since elementary OS supplies different code names, there is a mismatch. Supposedly, this can be worked around by launching Ubuntu Software Center from Terminal with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export SOFTWARE_CENTER_DISTRO_CODENAME=trusty software-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-05T20:50:24.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1824" PostTypeId="2" ParentId="1821" CreationDate="2015-09-05T20:50:35.920" Score="4" Body="&lt;p&gt;Yes it is possible.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Right Click on the track you want to delete and select the last option asking to &quot;Delete from library&quot;. Refer the first picture.&lt;/li&gt;&#xA;&lt;li&gt;A new Popup appears. The first option is to &lt;em&gt;delete the music from the library and the pc&lt;/em&gt;, the second one is &lt;em&gt;cancel option&lt;/em&gt; and the last one is your choice. It(last option) deletes the track only from the library. Refer the second picture.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Delete Track from Library - first picture&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TxrJq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TxrJq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Popup - second picture&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rkSbI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rkSbI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="158" LastEditorDisplayName="user922" LastEditDate="2015-09-06T20:24:24.120" LastActivityDate="2015-09-06T20:24:24.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1825" PostTypeId="2" ParentId="1460" CreationDate="2015-09-05T21:03:46.923" Score="1" Body="&lt;p&gt;Right now, this is probably a feature request. Quite simply, the code for detecting and implementing this action does not exist, and likely won't appear until a bug has been filed and a fix released.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Questions about bugs and feature requests are off-topic because they cannot be resolved via Q&amp;amp;A. For more information on how to report issues, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How can I report an issue with elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="26" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-05T21:03:46.923" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1826" PostTypeId="2" ParentId="1659" CreationDate="2015-09-05T21:04:37.240" Score="1" Body="&lt;p&gt;You will always get an error about not being able to load the file chooser module with legacy gtk2 apps or with qt apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &quot;Mutex&quot; bit is the part that's causing problems. This is related to an upstream bug in Gtk (See &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=735428&quot; rel=&quot;nofollow&quot;&gt;this bug report&lt;/a&gt;) and doesn't seem to affect the version of dropbox available from software center (as reported i&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1418489&quot; rel=&quot;nofollow&quot;&gt;n this bug report&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-05T21:04:37.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1827" PostTypeId="1" CreationDate="2015-09-05T21:08:23.303" Score="1" ViewCount="107" Body="&lt;p&gt;After update my system and reboot, at open Firefox I receive this error return:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[33] 05:57:27 sergio@freya ~&#xA;$ firefox&#xA;&#xA;(process:8010): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How to resolve this ?&#xA;I'm searching how to install pantheon-filechooser-module, but not found the solution.&lt;/p&gt;&#xA;" OwnerUserId="2290" LastEditorUserId="2290" LastEditDate="2015-09-05T21:14:55.693" LastActivityDate="2015-09-05T21:14:55.693" Title="Kernel 3.13.0-63-lowlatency - All up-to-date - Error at open firefox 40: Failed to load module &quot;pantheon-filechooser-module&quot;" Tags="|firefox|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1828" PostTypeId="2" ParentId="1743" CreationDate="2015-09-05T21:30:53.500" Score="3" Body="&lt;p&gt;Usually packages are held back because they require the installation of new packages or conflict and remove old packages. Typically you should just use the software updater app and it'll do the right thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you insist on upgrading through Terminal, you should make note of what packages will be added or removed. You can always search the internet to find out what those packages are and if they are important. As long as you steer clear of the &lt;code&gt;-y&lt;/code&gt; flag, you will be prompted before &lt;code&gt;apt&lt;/code&gt; attempts to add or remove new packages.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-05T21:30:53.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1833" PostTypeId="1" CreationDate="2015-09-06T06:29:44.727" Score="5" ViewCount="2416" Body="&lt;p&gt;I always get the information &quot;SSL handshake failed&quot;. What's wrong with Midori or elementary OS website? Other SSL websites are working. Also I can't reach Stack Exchange with Midori&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the new Midori-granite 0.5.11 on elementary-os freya 0.3.1 64bit&lt;/p&gt;&#xA;" OwnerUserId="1249" LastEditorUserId="45" LastEditDate="2015-09-06T18:06:00.407" LastActivityDate="2016-10-24T23:26:38.447" Title="Some HTTPS websites give an error with Midori. Why is this?" Tags="|release-freya|midori|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1834" PostTypeId="1" CreationDate="2015-09-06T06:43:20.667" Score="2" ViewCount="67" Body="&lt;p&gt;If I create a recurring event in the calendar, it automatically makes a copy of it to the next day.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uTIfM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uTIfM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should be only on Monday and Wednesday&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0Aj2N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0Aj2N.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2294" LastEditorUserId="4185" LastEditDate="2016-06-17T03:30:39.523" LastActivityDate="2016-06-17T03:30:39.523" Title="Calendar duplicates repeating events" Tags="|release-freya|applications|calendar|" AnswerCount="0" CommentCount="0" ClosedDate="2015-09-06T20:37:25.977" ContentLicense="CC BY-SA 3.0" />
  <row Id="1835" PostTypeId="1" CreationDate="2015-09-06T09:52:19.907" Score="1" ViewCount="447" Body="&lt;p&gt;I have a problem with music app — it does not display cover art embedded in the MP3 file, only for those that have a &lt;em&gt;folder.jpg&lt;/em&gt; in their folder :( I do not know how to fix it. I use new elementary OS 0.3.1 Freya.&lt;/p&gt;&#xA;" OwnerUserId="2295" LastEditorUserId="137" LastEditDate="2015-09-06T14:40:20.907" LastActivityDate="2015-09-06T14:40:20.907" Title="Noise does not display cover art embedded in the MP3" Tags="|music|" AnswerCount="0" CommentCount="0" ClosedDate="2015-09-06T20:41:36.577" ContentLicense="CC BY-SA 3.0" />
  <row Id="1837" PostTypeId="2" ParentId="1033" CreationDate="2015-09-06T15:13:24.860" Score="3" Body="&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:langdalepl/gvfs-mtp&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt; &lt;a href=&quot;http://michael-peeters.blogspot.de/2013/10/enable-mtp-support-on-elementary-os.html&quot; rel=&quot;nofollow&quot;&gt;Enable MTP-Support on ElementaryOS&lt;/a&gt;&#xA;&lt;br&gt;&lt;em&gt;Keep in mind that this is a workaround and that the guide is written 2013.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="1193" LastEditorUserId="1193" LastEditDate="2016-04-24T18:24:38.793" LastActivityDate="2016-04-24T18:24:38.793" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1838" PostTypeId="2" ParentId="1736" CreationDate="2015-09-06T16:46:51.477" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;hit &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;space&lt;/kbd&gt; for the application launcher&lt;/li&gt;&#xA;&lt;li&gt;type &quot;driver&quot;&lt;/li&gt;&#xA;&lt;li&gt;select the entry &quot;Addditional Drivers&quot;&lt;/li&gt;&#xA;&lt;li&gt;pick the driver you want&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="81" LastEditorUserId="22" LastEditDate="2015-09-06T18:20:55.857" LastActivityDate="2015-09-06T18:20:55.857" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1839" PostTypeId="1" CreationDate="2015-09-06T17:32:34.447" Score="2" ViewCount="349" Body="&lt;p&gt;Yesterday I tried install the last version of Freya from DVD-R, but I can't install this OS by this message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDD: Error 3200 reading sector 422616&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Invalid or corrupt kernel image.&#xA;boot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before (and later) this message appear a column of green text that tell this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDD: Error 3200 reading sector 423XXX&#xA;EDD: Error 3200 reading sector 423XXX&#xA;EDD: Error 3200 reading sector 423XXX&#xA;EDD: Error 3200 reading sector 423XXX..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(XXX = other numbers..)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Really I don't want try another install without know if my hardware is compatible with Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone can tell me if my hardware it's compatible? (with Freya or other extension of Linux, like Ubuntu)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Motherboard: GIGABYTE GA-8SG667&#xA;2GB RAM&#xA;Intel(R) Pentium(R) 4 CPU (2.40 GHz)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2299" LastActivityDate="2015-09-07T22:57:37.273" Title="I can't install Freya" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1840" PostTypeId="2" ParentId="1839" CreationDate="2015-09-06T17:45:24.110" Score="1" Body="&lt;p&gt;Your hardware appears to be compatible, but sounds like a corrupt file more than anything else. Could you verify the image you downloaded using the &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow&quot;&gt;installation docs&lt;/a&gt;, and possibly try another disk or verify that too? It could also be a physically damaged disk.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-06T17:45:24.110" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="1841" PostTypeId="2" ParentId="1833" CreationDate="2015-09-06T17:56:51.477" Score="3" Body="&lt;p&gt;This is a problem with &lt;code&gt;glib-networking&lt;/code&gt; related to certain types of SSL certificates. It should be fixed in the next release of elementary OS or if we can determine that it is safe to update this package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can reach elementary.io through &lt;code&gt;http&lt;/code&gt; instead of &lt;code&gt;https&lt;/code&gt;. Just make sure to remove the &quot;s&quot; from the URL :)&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-06T17:56:51.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1842" PostTypeId="1" AcceptedAnswerId="1844" CreationDate="2015-09-06T18:57:35.333" Score="6" ViewCount="2884" Body="&lt;p&gt;Months ago i read a note like &quot;not use autoremove because it break the meta package on Freya&quot;, is it safe to use now? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have so many packages which are no longer needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much quassy for editing my english btw:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;I seguenti pacchetti sono stati installati automaticamente e non sono&#xA;più richiesti:   consolekit hexchat-common libck-connector0&#xA;libgranite1 libgrip0   libkeybinder-3.0-0 libpam-ck-connector&#xA;libvala-0.26-0 libzeitgeist-1.0-1   linux-headers-3.16.0-37&#xA;linux-headers-3.16.0-37-generic   linux-headers-3.16.0-40&#xA;linux-headers-3.16.0-40-generic   linux-headers-3.16.0-41&#xA;linux-headers-3.16.0-41-generic   linux-headers-3.16.0-43&#xA;linux-headers-3.16.0-43-generic   linux-image-3.16.0-40-generic&#xA;linux-image-3.16.0-41-generic   linux-image-3.16.0-43-generic&#xA;linux-image-extra-3.16.0-40-generic  &#xA;linux-image-extra-3.16.0-41-generic&#xA;linux-image-extra-3.16.0-43-generic   pastebinit plank-theme-pantheon&#xA;sbsigntool Usare &quot;apt-get autoremove&quot; per rimuoverli.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user911" LastEditorUserId="68" LastEditDate="2015-09-06T23:47:37.150" LastActivityDate="2015-09-06T23:47:37.150" Title="Is it safe to use &quot;apt-get autoremove&quot;?" Tags="|apt|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1844" PostTypeId="2" ParentId="1842" CreationDate="2015-09-06T20:31:21.557" Score="4" Body="&lt;p&gt;&lt;strong&gt;You should be able to safely run &lt;code&gt;apt-get autoremove&lt;/code&gt;, but shouldn't usually need to.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's almost always a bad idea to run commands unless you explicitly understand what they do and how, including any output they post and decisions they ask you to make.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, based on the list of packages you provided, I think executing the command would be safe. Initially there are a few older libraries, common dependencies likely superseded by newer, separately packaged versions, and old kernel versions, nothing to worry about unless you've start experiencing issues as a result of recent updates. Finally there is the old plank theme, which can be safely uninstalled since you aren't using it anymore.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-09-06T21:48:10.650" LastActivityDate="2015-09-06T21:48:10.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1845" PostTypeId="1" CreationDate="2015-09-06T22:40:03.473" Score="3" ViewCount="175" Body="&lt;p&gt;After installing Freya I noticed that my laptop hangs very often. I can however do &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; and back &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F7&lt;/kbd&gt; to get it working again. Could someone tell me how can I find out what is causing that and how to fix it? &lt;/p&gt;&#xA;" OwnerUserId="2304" LastEditorUserId="45" LastEditDate="2015-09-07T15:15:04.597" LastActivityDate="2015-09-07T15:15:04.597" Title="How can I diagnose a system freeze?" Tags="|display|" AnswerCount="0" CommentCount="5" ClosedDate="2015-11-24T16:59:14.367" ContentLicense="CC BY-SA 3.0" />
  <row Id="1846" PostTypeId="2" ParentId="876" CreationDate="2015-09-06T22:47:45.643" Score="11" Body="&lt;h2&gt;Plank (Buttom Dockbar):&lt;/h2&gt;&#xA;&lt;p&gt;It's really easy to mirror plank to more than one screen.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure that &lt;code&gt;dconf Editor&lt;/code&gt; is installed:&lt;br&gt;&lt;code&gt;sudo apt-get install dconf-tools&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Convert existing &lt;code&gt;dock&lt;/code&gt; into &lt;code&gt;dock1&lt;/code&gt; and add &lt;code&gt;dock2&lt;/code&gt;, &lt;code&gt;dock3 ..&lt;/code&gt; :&lt;br&gt;&lt;code&gt;cd ~/.config/plank &amp;amp; mkdir dock2 dock3 ..&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy &lt;code&gt;settings&lt;/code&gt; files:&lt;br&gt;&lt;code&gt;cp dock1/settings dock2/ &amp;amp; cp dock1/settings dock3/ ..&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Link icons form &lt;code&gt;dock1&lt;/code&gt; to &lt;code&gt;dock2,..&lt;/code&gt;:&lt;br&gt;&lt;code&gt;ln -s dock1/launchers/ dock2/launchers &amp;amp; ln -s dock1/launchers/ dock3/launchers ..&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Identify monitor IDs:&lt;br&gt;&lt;code&gt;xrandr | grep &amp;quot; connected&amp;quot;&lt;/code&gt;&lt;br&gt;Output: &lt;code&gt;eDP1&lt;/code&gt; &lt;code&gt;DP1-2&lt;/code&gt; &lt;code&gt;DP1-3&lt;/code&gt; &lt;code&gt;..&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set monitor for dockX:&lt;br&gt;&lt;code&gt;sudo nano dockX/settings&lt;/code&gt;&lt;br&gt;&lt;code&gt;Monitor=&lt;/code&gt; &lt;code&gt;eDP1&lt;/code&gt;/&lt;code&gt;DP1-2&lt;/code&gt;/&lt;code&gt;DP1-3&lt;/code&gt;/&lt;code&gt;..&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Apply settings to pantheon:&lt;br&gt;&lt;code&gt;Apps -&amp;gt; dconf Editor&lt;/code&gt; and &lt;code&gt;org -&amp;gt; pantheon -&amp;gt; cerbere&lt;/code&gt;&lt;br&gt;Replace &lt;code&gt;'..plank..'&lt;/code&gt; with &lt;code&gt;'plank -n dock1 &amp;amp; plank -n dock2 &amp;amp; plank -n dock3 ..'&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Sources:&lt;/strong&gt;&lt;br&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/21nfw9/fun_tip_have_plank_run_on_multiple_monitors&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fun tip: Have plank run on multiple monitors!&lt;/a&gt;&lt;br&gt;&lt;a href=&quot;https://heathpaddock.com/?p=761&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dual docks in elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&lt;br&gt;&#xA;&lt;h2&gt;Wingpanel (Top Systembar):&lt;/h2&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; There is a ported version of autohide available here, &lt;a href=&quot;https://www.bountysource.com/issues/955498-add-optional-hide-mode&quot; rel=&quot;nofollow noreferrer&quot;&gt;WingPanel » Add optional hide mode&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1237228&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug #1237228&lt;/a&gt;&lt;/strong&gt;&#xA;&lt;br&gt;It should be an option to have wingpanel placed on multiple monitors. &amp;gt;&lt;br&gt;Perhaps the monitor number could be specified through a command line argument so that any combination of instances/monitors could be achieved.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Other customizations:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/912/1193&quot;&gt;How to install wingpanel-slim or super-wingpanel on elementary 0.3 Freya (amd64)?&lt;/a&gt;&lt;/strong&gt;&#xA;&lt;br&gt;Both wingpanel-slim and super-wingpanel were developed and maintained by a developer on Launchpad called ~heathbar. Unfortunately, it looks like he abandonded both projects and did not update them to work with Freya (last change to wingpanel-slim was 2013-11-19, last change to super-wingpanel was 2014-03-04).&#xA;&lt;br&gt;&lt;br&gt;Therefore, sadly, there is (currently) no way to use one of those on Freya. Maybe development will be resumed by someone else, but at this very moment, it's simply not possible.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;br&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/30alrd/freya_make_wingpanel_clear/&quot; rel=&quot;nofollow noreferrer&quot;&gt;(Freya) Make Wing-panel Clear&lt;/a&gt;&lt;/strong&gt;&#xA;&lt;br&gt;Install dconf editor (&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;)&#xA;&lt;br&gt;In dconf-editor: &lt;code&gt;org&amp;gt;pantheon&amp;gt;desktop&amp;gt;wingpanel&lt;/code&gt;&#xA;&lt;br&gt;Unselect &lt;code&gt;auto-adjust-alpha&lt;/code&gt; and set &lt;code&gt;background-alpha&lt;/code&gt; to &lt;code&gt;0.0&lt;/code&gt;. Done :)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="1193" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-09-08T08:49:26.483" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1847" PostTypeId="2" ParentId="1734" CreationDate="2015-09-06T23:38:54.363" Score="11" Body="&lt;p&gt;You don't need to manually install Intel drivers. elementary already provides the latest Intel driver that will work correctly with the rest of the hardware stack.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Intel driver installer from 01.org &lt;strong&gt;will not work&lt;/strong&gt; with elementary OS. They do not support elementary OS and the installer no longer supports the Ubuntu 14.04 base that Freya uses.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure that you're running the latest version of elementary OS. If you installed before September 3rd 2015, then you won't have the new graphics stack included in elementary OS Freya 0.3.1. You should download a fresh copy of elementary OS from our website and perform a clean install to get the best performance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're running the latest version of elementary OS and you're still experiencing performance issues, your computer may simply be too old to run elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-30T19:25:52.513" LastActivityDate="2015-09-30T19:25:52.513" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1848" PostTypeId="1" CreationDate="2015-09-07T03:03:48.250" Score="0" ViewCount="125" Body="&lt;p&gt;Does the installation process shown in elementary OS webpage automatically create a new partition?&lt;/p&gt;&#xA;" OwnerUserId="2306" LastEditorUserId="45" LastEditDate="2015-09-07T15:11:50.427" LastActivityDate="2015-09-07T15:11:50.427" Title="Does the installation process automatically create a new partition?" Tags="|system-installation|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1850" PostTypeId="2" ParentId="1848" CreationDate="2015-09-07T08:06:45.493" Score="3" Body="&lt;p&gt;Depending on your partitioning and already installed operating systems you will be presented by several options from installer.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;If there is free space&lt;/strong&gt; and you already have another operating system you will be presented with the option to &quot;Install elementary alongside [your operating system]&quot;. The partitions to host elementary will be created from the free space on the drive.&lt;/li&gt;&#xA;&lt;li&gt;Erase disk and install elementary. This option will format drive erasing all your data and create elementary partitions for clean installation as single OS.&lt;/li&gt;&#xA;&lt;li&gt;To do something else. This one will take you to the partitioning wizzard that allows you to customize your set up and manually select partitions for different mounting points. &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;Here is detailed process of using manual partition editor.&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="374" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-09-07T08:06:45.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1851" PostTypeId="1" CreationDate="2015-09-07T08:07:34.203" Score="2" ViewCount="328" Body="&lt;p&gt;When I connect my laptop to the TV via HDMI the Multi-Monitor mode is &quot;extended&quot; and sound profile stays on notebook speaker.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can change Multi-Monitor mode and sound profile only temporarily. After unplug and plug again HDMI the settings are gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My hope is, that there's a possibility to change the default Multi-Monitor mode permanently and make a setting that the sound profile is changing to HDMI as soon as HDMI is connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me?&lt;/p&gt;&#xA;" OwnerUserId="2307" LastActivityDate="2015-09-07T08:12:39.253" Title="Change default Multi-Monitor mode and adjust sound profile if HDMI is connected" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1852" PostTypeId="2" ParentId="1851" CreationDate="2015-09-07T08:12:39.253" Score="2" Body="&lt;p&gt;As far as the automatic sound change goes a quick look and Ask Ubuntu came up &lt;a href=&quot;https://askubuntu.com/a/395746&quot;&gt;with this answer&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested this solution but author claims it works with Ubuntu 14.04 meaning it should work with elementary OS Freya as well. All credit goes to him.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a file &lt;code&gt;/etc/udev/rules.d/hdmi_sound.rules&lt;/code&gt; as root with the content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SUBSYSTEM==&quot;drm&quot;, ACTION==&quot;change&quot;, RUN+=&quot;/usr/local/bin/hdmi_sound_toggle&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Create a file &lt;code&gt;/usr/local/bin/hdmi_sound_toggle&lt;/code&gt; as root with the content:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;USER_NAME=`who | grep &quot;(:0)&quot; | cut -f 1 -d ' '`&#xA;USER_ID=`id -u $USER_NAME`&#xA;HDMI_STATUS=`cat /sys/class/drm/card0/*HDMI*/status`&#xA;&#xA;export PULSE_SERVER=&quot;unix:/run/user/&quot;$USER_ID&quot;/pulse/native&quot;&#xA;&#xA;if [ $HDMI_STATUS = &quot;connected&quot; ]&#xA;then&#xA;    sudo -u $USER_NAME pactl --server $PULSE_SERVER set-card-profile 0 output:hdmi-stereo+input:analog-stereo&#xA;else&#xA;    sudo -u $USER_NAME pactl --server $PULSE_SERVER set-card-profile 0 output:analog-stereo+input:analog-stereo&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then make it executable with &lt;code&gt;chmod 0755 /usr/local/bin/hdmi_sound_toggle&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to make this script as generic as possible, but you still might need to change some lines, such as the HDMI_STATUS file path or the profiles used. You can see a list of profiles by running &lt;code&gt;pactl list cards&lt;/code&gt; and looking under Profiles.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the script failed for me when I removed the keyword &quot;export&quot; when setting PULSE_SERVER, I think pactl is looking for the env variable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to reload your udev rules: &lt;code&gt;sudo udevadm control --reload-rules&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="374" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-07T08:12:39.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1853" PostTypeId="2" ParentId="1815" CreationDate="2015-09-07T11:42:01.940" Score="0" Body="&lt;p&gt;OK I tried with internet connection and the grub installed properly without any error :-) &lt;/p&gt;&#xA;" OwnerUserId="2280" LastActivityDate="2015-09-07T11:42:01.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1854" PostTypeId="1" AcceptedAnswerId="1855" CreationDate="2015-09-07T12:42:51.373" Score="2" ViewCount="18" Body="&lt;p&gt;I am using Polish language version of elementary OS so the terminology might be incorrect. Anyway: I downloaded some free CC licenced stock photos and decided this is a great opportunity to actually use Photos!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It imported the collection nicely and I started to add comments and tags to them so I could find them easier later when I will actually need them for my web projects. But some of the photos get instantly &quot;removed&quot; from the collection when I select them. I double-checked Files and they are &quot;physically&quot; still there. I tried changing the view options of Photos to show &quot;All + rejected&quot; and - yeah - they are here. For some reason they are flagged as &quot;rejected&quot; (or whatever it is called in English).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to put them back into the normal collection screen? How to remove the &quot;event&quot; meta tags on them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to reimport them but it says that duplicates where found and they won't be imported.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-09-07T12:47:07.353" Title="Photos: some photos get rejected for some reason, why? How to restore them to the collection?" Tags="|photo-editing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1855" PostTypeId="2" ParentId="1854" CreationDate="2015-09-07T12:47:07.353" Score="2" Body="&lt;p&gt;Well - it seems that the best way to do it is to remove the photo from the collection. And then reimport it. No duplicates found and I can tag them without problems now. Weird.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-09-07T12:47:07.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1856" PostTypeId="1" CreationDate="2015-09-07T13:54:11.777" Score="1" ViewCount="268" Body="&lt;p&gt;When I open a video then interface split into two one with title of the video I am playing, with seek-bar and other controls and another with audience where it plays video which I can't make full-screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8WscP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8WscP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(audience:5152): Gtk-WARNING **: Theme parsing error: apps.css:141:26: 'none' is not a valid color name&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: apps.css:239:20: Not using units is deprecated. Assuming 'px'.&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets-backgrounds.css:15:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets-backgrounds.css:100:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets-assets.css:41:18: Expected a number&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:396:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:541:0: '' is not a valid color name&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:1296:25: Missing name of pseudo-class&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2122:24: Junk at end of value&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2402:18: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2551:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2671:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2678:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2732:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2738:22: Not a valid image&#xA;&#xA;(audience:5152): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:3637:4: Junk at end of value&#xA;[_LOG_LEVEL_INFO 18:55:29.189266] Application.vala:155: Audience version: 0.1.0.2&#xA;[_LOG_LEVEL_INFO 18:55:29.189323] Application.vala:157: Kernel version: 3.16.0-43-generic&#xA;[_LOG_LEVEL_WARN 18:55:29.190793] [Gtk] Theme parsing error: gtk-widgets.css:2:19: Theming engine 'adwaita' not found&#xA;[_LOG_LEVEL_WARN 18:55:29.191619] [Gtk] Theme parsing error: gtk-widgets.css:396:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.191964] [Gtk] Theme parsing error: gtk-widgets.css:541:0: '' is not a valid color name&#xA;[_LOG_LEVEL_WARN 18:55:29.193028] [Gtk] Theme parsing error: gtk-widgets.css:1296:25: Missing name of pseudo-class&#xA;[_LOG_LEVEL_WARN 18:55:29.194524] [Gtk] Theme parsing error: gtk-widgets.css:2122:24: Junk at end of value&#xA;[_LOG_LEVEL_WARN 18:55:29.194949] [Gtk] Theme parsing error: gtk-widgets.css:2402:18: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.195394] [Gtk] Theme parsing error: gtk-widgets.css:2551:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.195644] [Gtk] Theme parsing error: gtk-widgets.css:2671:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.195721] [Gtk] Theme parsing error: gtk-widgets.css:2678:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.195878] [Gtk] Theme parsing error: gtk-widgets.css:2732:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.195941] [Gtk] Theme parsing error: gtk-widgets.css:2738:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.197368] [Gtk] Theme parsing error: gtk-widgets.css:3637:4: Junk at end of value&#xA;[_LOG_LEVEL_WARN 18:55:29.199239] [Gtk] Theme parsing error: gtk-widgets-backgrounds.css:15:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.199421] [Gtk] Theme parsing error: gtk-widgets-backgrounds.css:100:22: Not a valid image&#xA;[_LOG_LEVEL_WARN 18:55:29.199894] [Gtk] Theme parsing error: gtk-widgets-borders.css:75:22: 'none' is not a valid color name&#xA;[_LOG_LEVEL_WARN 18:55:29.201781] [Gtk] Theme parsing error: gtk-widgets-overrides.css:630:0: not a number&#xA;[_LOG_LEVEL_WARN 18:55:29.201841] [Gtk] Theme parsing error: gtk-widgets-overrides.css:630:0: expected '}' after declarations&#xA;[_LOG_LEVEL_DEBUG 18:55:29.219203] [Gtk] Connecting to session manager&#xA;[_LOG_LEVEL_DEBUG 18:55:29.225816] Settings.vala:158: Loading settings from schema 'org.pantheon.audience'&#xA;[_LOG_LEVEL_FATAL 18:55:29.227705] [GLib-GObject] g_object_set: assertion 'G_IS_OBJECT (object)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.227737] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.229058] VideoPlayer.vala:497: Updating subtitle font&#xA;[_LOG_LEVEL_FATAL 18:55:29.256532] [GLib-GObject] g_object_set: assertion 'G_IS_OBJECT (object)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.256586] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358106] DiskManager.vala:103: Check DVD media for: SONGS&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358175] DiskManager.vala:107: Activation root: file:///home/eshant/Music&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358320] DiskManager.vala:103: Check DVD media for: MOVIES&#xA;[_LOG_LEVEL_FATAL 18:55:29.358364] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358385] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358416] DiskManager.vala:103: Check DVD media for: EXTRA&#xA;[_LOG_LEVEL_FATAL 18:55:29.358443] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358466] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358492] DiskManager.vala:103: Check DVD media for: Windows7&#xA;[_LOG_LEVEL_FATAL 18:55:29.358518] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358538] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358562] DiskManager.vala:103: Check DVD media for: Backup&#xA;[_LOG_LEVEL_FATAL 18:55:29.358605] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358624] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358648] DiskManager.vala:103: Check DVD media for: L_CENTER&#xA;[_LOG_LEVEL_FATAL 18:55:29.358674] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358693] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358717] DiskManager.vala:103: Check DVD media for: L-STORE&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358745] DiskManager.vala:107: Activation root: file:///media/L-Store&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358852] DiskManager.vala:103: Check DVD media for: W-STORE&#xA;[_LOG_LEVEL_FATAL 18:55:29.358881] [GLib-GIO] g_mount_get_default_location: assertion 'G_IS_MOUNT (mount)' failed&#xA;[_LOG_LEVEL_FATAL 18:55:29.358901] Audience will not function properly.&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358925] DiskManager.vala:103: Check DVD media for: VIDEOS&#xA;[_LOG_LEVEL_DEBUG 18:55:29.358953] DiskManager.vala:107: Activation root: file:///home/eshant/Videos&#xA;[_LOG_LEVEL_WARN 18:55:37.757717] [Gtk] Error loading image 'file:///usr/share/themes/Xenite/gtk-3.0/css/dark/assets/pane-separator-grip-dark.svg': Error opening file: No such file or directory&#xA;[_LOG_LEVEL_WARN 18:55:37.789707] [Gtk] Error loading image 'file:///usr/share/themes/Xenite/gtk-3.0/css/dark/borders/button-border-dark.png': Error opening file: No such file or directory&#xA;[_LOG_LEVEL_WARN 18:55:37.790411] [Gtk] Error loading image 'file:///usr/share/themes/Xenite/gtk-3.0/css/dark/borders/button-border-default-dark.png': Error opening file: No such file or directory&#xA;[_LOG_LEVEL_WARN 18:55:37.791673] [Gtk] Error loading image 'file:///usr/share/themes/Xenite/gtk-3.0/css/dark/borders/generic-border-dark.png': Error opening file: No such file or directory&#xA;[_LOG_LEVEL_WARN 18:55:58.431598] [Gtk] Error loading image 'file:///usr/share/themes/Xenite/gtk-3.0/css/dark/borders/generic-border-focused-dark.png': Error opening file: No such file or directory&#xA;[_LOG_LEVEL_DEBUG 18:55:58.676533] Audience.vala:834: Opening file:///home/eshant/Learning/Python/python%20tutorial%20advanced%20-%20YouTube/Python%20Advanced%20Tutorial%203%20-%20Argparse%20(720p).mp4&#xA;[_LOG_LEVEL_DEBUG 18:55:58.768452] VideoPlayer.vala:497: Updating subtitle font&#xA;15 56 15,37&#xA;Width: 1250.000000, Height: 703.125000, Offset: 75.000000 (1280.000000, 720.000000)&#xA;Result: 1280 2105 == 1280 779&#xA;15 56 15,37&#xA;Width: 1245.000000, Height: 700.312500, Offset: 75.000000 (1280.000000, 720.000000)&#xA;Result: 1275 2096 == 1275 776&#xA;[_LOG_LEVEL_DEBUG 18:56:03.173830] VideoPlayer.vala:497: Updating subtitle font&#xA;[_LOG_LEVEL_DEBUG 18:56:03.174358] VideoPlayer.vala:497: Updating subtitle font&#xA;[_LOG_LEVEL_DEBUG 18:56:03.174594] Audience.vala:683: saving settings for: file:///home/eshant/Learning/Python/python%20tutorial%20advanced%20-%20YouTube/Python%20Advanced%20Tutorial%203%20-%20Argparse%20(720p).mp4&#xA;[_LOG_LEVEL_DEBUG 18:56:03.174736] VideoPlayer.vala:497: Updating subtitle font&#xA;[_LOG_LEVEL_DEBUG 18:56:03.174903] VideoPlayer.vala:497: Updating subtitle font&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is it due to Gtk theme I am using(&lt;a href=&quot;https://github.com/eOS-themes/Xenite&quot; rel=&quot;nofollow noreferrer&quot;&gt;Xenite&lt;/a&gt;)?&lt;/p&gt;&#xA;" OwnerUserId="811" LastEditorUserId="811" LastEditDate="2015-09-07T13:59:51.660" LastActivityDate="2015-09-25T18:08:38.210" Title="Buggy interface for audience" Tags="|release-freya|audience|" AnswerCount="2" CommentCount="0" ClosedDate="2017-10-08T17:28:07.113" ContentLicense="CC BY-SA 3.0" />
  <row Id="1857" PostTypeId="2" ParentId="1856" CreationDate="2015-09-07T14:35:37.940" Score="3" Body="&lt;p&gt;If you don't see the issue using the default theme then it's a Xenite issue. Since I &lt;a href=&quot;https://github.com/eOS-themes/Xenite/blob/master/readme.md#note-this-theme-is-no-longer-under-development-hopefully-we-developers--contributors-will-back-on-this-theme-soon-but-not-before-the-date-of-elementary-os-04-release&quot; rel=&quot;nofollow&quot;&gt;don't develop this theme anymore&lt;/a&gt;, I won't fix that even if it's an issue with the theme.&lt;/p&gt;&#xA;" OwnerUserId="2308" LastActivityDate="2015-09-07T14:35:37.940" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1858" PostTypeId="1" CreationDate="2015-09-07T16:14:14.513" Score="2" ViewCount="821" Body="&lt;p&gt;Trying to install from a USB live image and getting the following - &#xA;[  26.952015] ata3: COMRESET failed (erro=16)&#xA;BusyBox v1.21.1 (Ubuntu 1:1.21-0-1unbuntu1) built-in shell (ash)&#xA;Enter 'help' for a list of built-in commands&#xA;(initramfs) Unable to find a medium containing a live file system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;background.  root, swap and home partitions are already set up.&#xA;Using the Freya i386 ISO (latest) passed checksum.&#xA;Used rufus to put extract the ISO image onto the USB thumbdrive.&#xA;I reboot using this thumb drive.  The first thing that comes up is a &#xA;COMRESET message, shortly thereafter the elementary logo comes up and stays&#xA;on screen for a good 5 to 8 seconds.  Then I get the error message above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know why?  My DVD is shot, and I'll happily go get one to try and install from it tomorrow; but if there is a way to fix this then I'd just as soon get the install finished.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally had it with Windows.  Windows 10 is not going on my systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for any assist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;randyv&lt;/p&gt;&#xA;" OwnerUserId="2309" LastActivityDate="2015-09-07T16:14:14.513" Title="unable to find a medium containing a live file system" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T16:07:48.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="1859" PostTypeId="1" AcceptedAnswerId="1862" CreationDate="2015-09-07T16:24:07.287" Score="10" ViewCount="11693" Body="&lt;p&gt;I'm on Freya 0.3.1 64bit and get the message &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;when running an electron shell app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to start it with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_MODULES=pantheon-filechooser-module electron .&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and tried to set&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings enabled-gtk-modules &quot;['pantheon-filechooser-module']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but neither worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any chance to enable that module?&lt;/p&gt;&#xA;" OwnerUserId="2310" LastActivityDate="2021-03-12T00:01:49.797" Title="Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1860" PostTypeId="1" CreationDate="2015-09-07T17:14:42.197" Score="2" ViewCount="1445" Body="&lt;p&gt;I've been seeing something kind of odd behavior from of my elementary OS install: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cbS8k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/cbS8k.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I left the machine running as a guest on my VMWare ESXi server overnight, it would plateau in CPU use once every ten minutes or so. Other VMs, like Windows 7 and Ubuntu 14 will typically max out at like 0.2 GHz when idle, but Gala seems to be pushing this elementary OS install to five times that amount periodically. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas what could cause this? The big leap in use on the right hand side is when I logged in and after ten minutes ran &lt;code&gt;gala --replace &amp;amp;&lt;/code&gt; to reset Gala, which had consumed like 40 minutes of CPU time in the past day of being idle with no applications running. Another ten minutes after restarting Gala and it's running smooth and clear at under 1% total system CPU-use. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I use crontab to force-reset Gala every time I go idle? Anyone have some ideas what might cause this? I've had problems in the past with high idle-CPU use on elementary OS installs (sitting at 1+GHz when not in use), but this is the first time it made a time-variable pattern like the above screenshot. &lt;/p&gt;&#xA;" OwnerUserId="2312" LastEditorUserId="3757" LastEditDate="2016-04-25T07:40:28.277" LastActivityDate="2020-12-13T03:29:25.440" Title="Problems with High CPU use when Elementary OS is Idle and Unused" Tags="|gala|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1862" PostTypeId="2" ParentId="1859" CreationDate="2015-09-07T17:59:23.417" Score="10" Body="&lt;p&gt;It is not possible to use the file chooser module with non-gtk3 apps. You will always see this warning message with those apps. When the module fails to load, you'll get the fallback gtk2 chooser.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-07T17:59:23.417" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1863" PostTypeId="1" CreationDate="2015-09-07T18:34:16.913" Score="1" ViewCount="181" Body="&lt;p&gt;I tried to install a NVidia driver, now nothing works.&#xA;I followed this guide: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2013/08/install-nvidia-opengl-4-4-driver-325-05-03-in-ubuntu-linux-mint/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2013/08/install-nvidia-opengl-4-4-driver-325-05-03-in-ubuntu-linux-mint/&lt;/a&gt;&#xA;The installation failed and now the screen is just black after the elementary logo during start up. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what I have to do to fix it?&lt;/p&gt;&#xA;" OwnerUserId="2313" LastActivityDate="2015-09-08T08:55:18.807" Title="OS stops before login screen" Tags="|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1864" PostTypeId="1" CreationDate="2015-09-07T19:17:05.343" Score="0" ViewCount="934" Body="&lt;p&gt;I recently installed elementary OS Freya 0.3 on Dell Inspiron duo 1090 Netbook (Intel Atom n550 @1.6GHz Intel NM10 Chipset, GMA3150 Graphics) and my experience with elementary OS is semi-good, why semi? Due to weird graphics issues.&#xA;The animations are mostly smooth, only changing pages in apps menu isn't smooth at all, very laggy and sluggish, as well as minimizing and maximizing apps/windows. Graphics tend to have minor artifacts when transitioning from login to desktop, and changing workspace (black parts of screen for split-second). I've updated elementary OS with oibaf's repo added, elementary OS updater installed some updates from his repo (VDPAU mostly), and it did no changes whatsoever, maybe window dragging on desktop is a little smoother, but artifacts still happen, can't install Intel Drivers due to &quot;Distro not supported&quot; error, and some people say elementary OS has it's own Freya optimized Intel drivers included, and don't need installing it manually (even so, tried to install anyway, still distro not supported error). &#xA;My question is simple:&#xA;What can I do to solve this problem? Is there anything that can help?&#xA;Looking forward for a response, Cheers!&lt;/p&gt;&#xA;" OwnerUserId="2314" LastEditorUserId="34" LastEditDate="2015-09-14T09:39:52.967" LastActivityDate="2015-09-14T09:39:52.967" Title="Graphics issues on elementary OS Freya Atom N550 (GMA3150)" Tags="|release-freya|graphic-drivers|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1865" PostTypeId="2" ParentId="1787" CreationDate="2015-09-07T19:56:19.550" Score="1" Body="&lt;p&gt;Upgrading to VirtualBox 5 and reinstalling the guest additions and rebooting elementary OS actually solved the problem.&lt;/p&gt;&#xA;" OwnerUserId="2275" LastEditorUserId="2708" LastEditDate="2015-11-27T10:57:45.550" LastActivityDate="2015-11-27T10:57:45.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1866" PostTypeId="1" AcceptedAnswerId="1877" CreationDate="2015-09-07T20:07:48.997" Score="0" ViewCount="1174" Body="&lt;pre&gt;&lt;code&gt;wait-for-state stop/waiting&#xA;*Using makefile-style concurrent boot in runlevel 6&#xA;Can't open /etc/init.d/.depend.stop: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I receive this message upon a reboot or shutdown attempt. Anyone know how to fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="2315" LastEditorUserId="3757" LastEditDate="2016-04-25T02:01:27.753" LastActivityDate="2016-04-25T02:01:55.540" Title="Unable to reboot and/or shutdown?" Tags="|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1867" PostTypeId="2" ParentId="1864" CreationDate="2015-09-07T20:29:38.027" Score="2" Body="&lt;p&gt;&lt;strong&gt;Upgrade&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you installed before the 3rd of September 2015, then you won't have the new graphics stack included in &lt;a href=&quot;http://blog.elementary.io/post/128271333121/freya-031-is-here&quot; rel=&quot;nofollow&quot;&gt;elementary OS Freya 0.3.1&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;At the heart of this upgrade is the latest Hardware Enablement stack from Ubuntu 14.04.3. It includes version 3.19 of the Linux kernel and an updated Mesa that fixes the dreaded “double cursor” glitch. Workspaces in the Multitasking view also now work properly on Nvidia Optimus. The new hardware stack also brings better support for backlights and touchpads on certain laptops, a host of performance and power-related improvements, and support for 5th generation Intel processors. This release should also improve support for (U)EFI systems, especially when installing without an internet connection.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Upgrade&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second to this, GMA graphics are some of the &lt;em&gt;lowest&lt;/em&gt; ranked graphics in place, they are probably worse than running on a decent processor, which is another thing you rank fairly low on. While elementary OS is reasonably lightweight, you will experience issues on older/slower hardware. The Dell Inspiron Duo is a &lt;a href=&quot;http://www.cnet.com/uk/products/dell-inspiron-duo/&quot; rel=&quot;nofollow&quot;&gt;3-star laptop&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-07T20:29:38.027" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1868" PostTypeId="1" CreationDate="2015-09-07T21:03:34.010" Score="1" ViewCount="1377" Body="&lt;p&gt;I use NordVPN. I clicked VPN Connections -&gt; Configure VPN -&gt; Add -&gt; Import a saved VPN configuration file -&gt; entered my username and passwrd and imported cacrt file but every time I try to connect it says timed out :( Any help please?&lt;/p&gt;&#xA;" OwnerUserId="2316" LastActivityDate="2018-10-23T00:14:54.930" Title="Attempting to connect to VPN" Tags="|openvpn|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1869" PostTypeId="2" ParentId="1863" CreationDate="2015-09-07T21:10:32.023" Score="5" Body="&lt;p&gt;&lt;strong&gt;Please don't follow random internet instructions, especially when they're a couple of years old.&lt;/strong&gt; The instructions you followed were published on August 20th, 2013. They are likely pointing to what is now an out of date driver, and will have been tested on elementary OS 0.2 Luna, since Freya wasn't released until April 2014.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 1: (Re-) Install Freya 0.3.1&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Freya 0.3.1 was recently released with an upgraded graphics stack. Installing that and sticking to the drivers found in the &quot;Additional Drivers&quot; module is probably both the easiest and safest way. You should be able to access your hard drive and take off any files you want to keep.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 2: Purge the driver&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Switch to the TTY using &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;Login with your username and password.&lt;/li&gt;&#xA;&lt;li&gt;Uninstall the driver.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The article you linked lists the uninstall command as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ~/Downloads/NVIDIA-Linux-*-325.05.03.run --uninstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-07T21:10:32.023" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1871" PostTypeId="1" CreationDate="2015-09-07T21:14:25.200" Score="3" ViewCount="7105" Body="&lt;p&gt;Trying to get my HP Officejet 5740 working with scanning. Everything I find is outdated or not working. When I try to run the hp-setup command, I get this below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: HPLIP is not installed properly or is installed without graphical support. Please reinstall HPLIP&#xA;warning: Qt/PyQt 4 initialization failed.&#xA;error: hp-setup requires GUI support (try running with --qt3). Also, try using interactive (-i) mode.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can print to the printer, but that’s it. Can anyone help me out with this? Really need help getting scanning working.&lt;/p&gt;&#xA;" OwnerDisplayName="user2277" LastEditorUserId="242" LastEditDate="2015-09-09T22:10:17.267" LastActivityDate="2015-12-09T13:15:37.447" Title="How do I install the new version of HPLIP?" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1872" PostTypeId="2" ParentId="1868" CreationDate="2015-09-07T21:26:07.077" Score="1" Body="&lt;p&gt;Start with basic network troubleshooting. Check IP address, verify VPN server has opened ports TCP 1723 and GRE, verify server has VPN account set up. Can you ping this IP address from terminal?  &lt;/p&gt;&#xA;" OwnerDisplayName="user2277" LastActivityDate="2015-09-07T21:26:07.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1874" PostTypeId="2" ParentId="1793" CreationDate="2015-09-08T01:12:40.500" Score="3" Body="&lt;p&gt;The kind of harsh but true answer is that you will never have the same exact thing as a clean install no matter OS you upgrade. There will always be some minor (and sometimes some major) differences, especially when the new version changes any default configuration files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically regarding the new hardware enablement stack, this is not pulled down automatically. While theoretically everyone should experience better results, it's possible that the new hardware stack will give certain setups worse results. If you're not experiencing any issues with your hardware, you should probably remain on the 0.3.0 (Trusty-based) stack.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need help upgrading to the new hardware stack from 0.3.0, please &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1764/45&quot;&gt;see this post&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-10-06T17:38:42.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1877" PostTypeId="2" ParentId="1866" CreationDate="2015-09-08T13:50:31.603" Score="1" Body="&lt;p&gt;This problem is because &lt;code&gt;/etc/init.d/&lt;/code&gt; has been corrupt, you should try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/init.d/rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check CONCURRENCY appears like this or add:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;CONCURRENCY=&quot;none&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -P now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="678" LastEditorUserId="3757" LastEditDate="2016-04-25T02:01:55.540" LastActivityDate="2016-04-25T02:01:55.540" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1878" PostTypeId="2" ParentId="1871" CreationDate="2015-09-08T14:31:15.563" Score="1" Body="&lt;p&gt;HP Officejet 5740 is working with the new HPLIP which you can get here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://hplipopensource.com/hplip-web/index.html&quot; rel=&quot;nofollow&quot;&gt;http://hplipopensource.com/hplip-web/index.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://hplipopensource.com/hplip-web/models/officejet/officejet_5740_series.html&quot; rel=&quot;nofollow&quot;&gt;http://hplipopensource.com/hplip-web/models/officejet/officejet_5740_series.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to deinstall the version of hplip and hplip-gui you have already installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And further. If you have already installed freya 0.3.1 so you have to choose Ubuntu 15.04 in the download area on the HPLIP website.&lt;/p&gt;&#xA;" OwnerUserId="2323" LastEditorUserId="2323" LastEditDate="2015-09-08T14:36:32.703" LastActivityDate="2015-09-08T14:36:32.703" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1879" PostTypeId="1" CreationDate="2015-09-08T15:14:46.317" Score="0" ViewCount="2172" Body="&lt;p&gt;I would like to try Elementary OS, but for some reason I can't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created the Live CD last night and as far as I can tell the CD was created successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I boot to the disk, I am soon greeted by the logo which pulsates with a white glowing light. Shortly after that on my main display, little glitchy boxes appear across the screen, spaced at maybe 1/2-1 inch intervals, about a 1/4 of the way from the top of the logo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that I am taken to a black screen, where I can still see and move my mouse.  The cursor starts as a spinning circle then after a short period of time it changes to the usual arrow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I waited there for maybe a minute or two before restarting, and trying again with the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now my monitors (I have 2) are hooked up to an old GeForce 8800 GTS, and I haven't tried using the integrated graphics on my i7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not really sure where to go from here. I see other with similar problems but it looks like they have already installed the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there some way to get terminal access and read some sort of output or log file when starting the Live CD to troubleshoot further?&lt;/p&gt;&#xA;" OwnerUserId="2324" LastActivityDate="2016-05-12T19:40:24.507" Title="Black screen when booting to Live CD" Tags="|release-freya|system-installation|live-cd|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1880" PostTypeId="1" CreationDate="2015-09-08T15:50:47.413" Score="0" ViewCount="286" Body="&lt;p&gt;I can do Ctrl-Super- &amp;lt; or &gt; but it doesn't allow me to do 2 windows. Nor when I drag a window (instead of using the keyboard) to the left or right side, it doesn't automatically adjust itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/314/split-application-windows-to-fit-the-screen/315#315&quot;&gt;Split application windows to fit the screen&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2316" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-09T06:50:03.163" Title="Split Application windows to fit Screen" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1882" PostTypeId="1" CreationDate="2015-09-08T18:13:38.943" Score="1" ViewCount="37" Body="&lt;p&gt;I try to move on plank but the system just starts the file manager. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to have an icon to start the file manager and another one to start the file manager on a path I choose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ty guys &lt;/p&gt;&#xA;" OwnerDisplayName="user911" LastActivityDate="2015-09-08T18:13:38.943" Title="Plank - How i can add on dock a folder like home/fred/mymusic?" Tags="|plank|" AnswerCount="0" CommentCount="3" ClosedDate="2015-09-09T18:48:47.647" ContentLicense="CC BY-SA 3.0" />
  <row Id="1883" PostTypeId="1" CreationDate="2015-09-08T18:14:20.847" Score="1" ViewCount="313" Body="&lt;p&gt;I am not able to get fan control working. It always says, that there are no PWM Fans even if there are. Anyone expiring something similar or got an idea how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ivan&lt;/p&gt;&#xA;" OwnerUserId="2325" LastActivityDate="2015-09-12T11:03:03.587" Title="No PWM Sensors found" Tags="|software-installation|hardware|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1884" PostTypeId="2" ParentId="1776" CreationDate="2015-09-08T20:45:21.143" Score="11" Body="&lt;h2&gt;Update&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;elementary OS Freya 0.3.2 has been released and fixes many of these issues. If you are installing or working on 0.3.1 and are experiencing these issues, we recommend you upgrade.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Keep in mind that this is only a workaround!&lt;/h2&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801/comments/5&quot; rel=&quot;noreferrer&quot;&gt;Rob Hartley (8ob):&lt;/a&gt;&lt;/strong&gt; This is only a workaround though. The real question is why this happens in the first place. I did not receive any errors during&#xA;  installation that would suggest grub failed to configure the system properly.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Elementary 0.3.1 as normal (no special partitioning).&lt;br&gt;Follow: &lt;a href=&quot;https://elementary.io/de/docs/installation#download-elementary-os&quot; rel=&quot;noreferrer&quot;&gt;elementary.io - Installation&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot will end in &lt;code&gt;grub shell&lt;/code&gt;. Enter:&lt;br&gt;&lt;code&gt;configfile (hd&lt;/code&gt; and press &lt;kbd&gt;TAB&lt;/kbd&gt;. Select one and add &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;&lt;br&gt;Example: &lt;code&gt;configfile (hd0, gpt4)/boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal after boot and type:&lt;br&gt;&lt;code&gt;cd /boot/efi/EFI/grub&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp grubx64.efi grubx64.efi.backup&lt;/code&gt; (just in case)&lt;br&gt;&lt;code&gt;sudo rm grubx64.efi&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp /boot/grub/x86_64-efi/grub.efi /boot/efi/EFI/grub/grubx64.efi&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt; &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;noreferrer&quot;&gt;Freya UEFI install boots to grub prompt&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1193" LastEditorUserId="26" LastEditDate="2015-12-10T01:52:19.693" LastActivityDate="2015-12-10T01:52:19.693" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1885" PostTypeId="2" ParentId="1879" CreationDate="2015-09-08T21:59:36.547" Score="3" Body="&lt;p&gt;I think it's something about your graphic card. Try to boot live CD in nomodeset option to prevent the system load a incorrect driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After boot from Live CD, move to line &quot;Try elementary OS&quot; and press &quot;e&quot; key. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see a line ending with &quot;quiet splash&quot;. Add the word &quot;nomodeset&quot; after, so the line looks like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;quiet splash nomodeset&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Press control+X to boot. I hope this help you.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-09-08T21:59:36.547" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1887" PostTypeId="1" CreationDate="2015-09-09T00:15:40.607" Score="1" ViewCount="731" Body="&lt;p&gt;I have bought a new pc. It has an Intel g3258 with an ASUS h81m-k mobo. I have installed Windows 10 ( with safe mode disabled) and I also want to install elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm not being able to install it. I have tried both 0.3.1 and 0.3.0. With the latest release, grub loads into bash minimal mode. With the old release grub doesn't install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried the answer I found in the forum, renaming grub files and it doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me? &lt;/p&gt;&#xA;" OwnerUserId="1224" LastEditorUserId="3757" LastEditDate="2016-04-04T14:14:36.867" LastActivityDate="2016-04-04T14:14:36.867" Title="I can't boot elementary OS" Tags="|boot|dual-boot|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-09T18:48:03.413" ContentLicense="CC BY-SA 3.0" />
  <row Id="1888" PostTypeId="2" ParentId="1880" CreationDate="2015-09-09T06:50:03.163" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I can do Ctrl-Super- &amp;lt; or &gt; but it doesn't allow me to do 2 windows.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You have to focus the 2nd window before.&lt;br&gt;&#xA;You can do that by click on the window or using &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Nor when I drag a window (instead of using the keyboard) to the left or right side, it doesn't automatically adjust itself.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Did you tried that with different windows?&lt;br&gt;&#xA;Maybe it just don't work with a special window that isn't allowed to be resized.&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-09-09T06:50:03.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1889" PostTypeId="2" ParentId="1887" CreationDate="2015-09-09T10:01:02.263" Score="0" Body="&lt;p&gt;Try going through this blog as well as the featured comment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow&quot;&gt;Guide to install elementary along side windows&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This explains &quot;grub-efi could not install error&quot;&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-09T10:01:02.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1890" PostTypeId="1" AcceptedAnswerId="1891" CreationDate="2015-09-09T11:21:28.480" Score="5" ViewCount="9370" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3MMX0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3MMX0.png&quot; alt=&quot;VLC Error Console: No suitable decoder module: VLC does not support the audio or video format “hevc&amp;quot;. Unfortunately there is no way for you to fix this.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;No suitable decoder module:&lt;br&gt;&#xA;  VLC does not support the audio or video format “hevc&quot;.&lt;br&gt;&#xA;  Unfortunately there is no way for you to fix this.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-09T11:21:28.480" Title="How do I add support for the &quot;hevc&quot; format to VLC?" Tags="|codec|vlc|format|" AnswerCount="1" CommentCount="1" ClosedDate="2015-09-09T22:03:24.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="1891" PostTypeId="2" ParentId="1890" CreationDate="2015-09-09T11:21:28.480" Score="8" Body="&lt;h3&gt;Install the HEVC VLC Plugin&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You will need to install &lt;code&gt;libde265&lt;/code&gt;, which is an open source implementation of the h.265 video codec, or HEVC.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:strukturag/libde265 &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get install vlc-plugin-libde265&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-09T11:21:28.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1892" PostTypeId="1" AcceptedAnswerId="1893" CreationDate="2015-09-09T11:24:16.030" Score="11" ViewCount="9924" Body="&lt;p&gt;The version supplied is significantly out of date, to the point where I faced issues with specific codecs relying on a newer version. I would prefer an official build or repository.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="242" LastEditDate="2015-09-09T21:41:23.837" LastActivityDate="2016-09-25T22:58:24.797" Title="How do I install the latest version of VLC media player?" Tags="|updates|vlc|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1893" PostTypeId="2" ParentId="1892" CreationDate="2015-09-09T11:24:16.030" Score="12" Body="&lt;h3&gt;Install from a Repository&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You can install the latest &lt;em&gt;supported&lt;/em&gt; version from the &lt;a href=&quot;https://launchpad.net/~videolan/+archive/ubuntu/stable-daily&quot;&gt;Official PPA&lt;/a&gt;. This has the added benefit of being an official build and distribution channel, maintained by VLC themselves.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:videolan/stable-daily &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-09-09T18:42:52.290" LastActivityDate="2015-09-09T18:42:52.290" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1894" PostTypeId="2" ParentId="1892" CreationDate="2015-09-09T12:36:17.403" Score="4" Body="&lt;p&gt;The official PPA from Videolan does not contain all the libraries needed to run VLC like HEVC support. This &lt;a href=&quot;https://launchpad.net/~mc3man/+archive/ubuntu/trusty-media&quot; rel=&quot;nofollow&quot;&gt;PPA&lt;/a&gt; is specifically for users looking for media updates. Its contains the latest version of VLC and other popular video players.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mc3man/trusty-media&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&#xA;sudo apt-get install vlc vlc-plugin-*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="129" LastEditorUserId="129" LastEditDate="2015-09-12T04:47:21.857" LastActivityDate="2015-09-12T04:47:21.857" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1895" PostTypeId="1" CreationDate="2015-09-09T13:46:44.813" Score="3" ViewCount="930" Body="&lt;p&gt;When I do a rename of a file (or a folder) I want to be able to use copy/paste (&lt;kbd&gt;CTRL+C&lt;/kbd&gt; / &lt;kbd&gt;CTRL+V&lt;/kbd&gt;) !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to do this (using keyboard shortcut or right click), the name gets validated (I am not in edition mode anymore) ... so I can't copy the name ! :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As soon as I right click or use the &lt;kbd&gt;CTRL&lt;/kbd&gt; key, the name is validated: I am not in edition mode of the name any more and that's the file that is selected and not the file name anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT: Sept 2016&lt;/strong&gt;&lt;br&gt;&#xA;This was due to the option to display circles when pressing CTRL (&lt;em&gt;Parameters=&gt; Mouse&lt;/em&gt; check &lt;em&gt;Reveal cusor position&lt;/em&gt;: that stops the edit mode as soon as you press CTRL) !&lt;br&gt;&#xA;This is still true for &lt;em&gt;Loki&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="2329" LastEditDate="2016-09-16T10:13:36.530" LastActivityDate="2016-09-16T10:13:36.530" Title="How can I copy/paste the file NAME?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1896" PostTypeId="1" CreationDate="2015-09-09T13:55:36.157" Score="3" ViewCount="102" Body="&lt;p&gt;In Luna, it was possible (using dconf) to add an &quot;Up&quot; button in Files, to move to the parent directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same instructions don't work on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to add an &quot;Up&quot; button to switch to the parent directory ?&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="45" LastEditDate="2015-09-09T22:19:06.530" LastActivityDate="2015-09-09T22:19:06.530" Title="Can I add an &quot;Up&quot; button to Files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1897" PostTypeId="1" CreationDate="2015-09-09T14:47:29.693" Score="3" ViewCount="221" Body="&lt;p&gt;In example: If I open 5 tabs on chromium, I can't click on the button to open a new tab. When I use Ctrl-T to open a new tab, I can't click on it.&lt;a href=&quot;https://i.stack.imgur.com/Y9NPN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y9NPN.png&quot; alt=&quot;Dead area&quot;&gt;&lt;/a&gt; This is the &quot;dead&quot; area which I can't click. It doesn't happen only in chromium, chromium was just an example. It always happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be causing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="2331" LastActivityDate="2015-09-09T15:01:46.060" Title="Can't click buttons that are directly under Sound/Wi-fi/Battery/Power shortcuts (top right corner)" Tags="|release-freya|" AnswerCount="1" CommentCount="5" ClosedDate="2015-09-10T12:30:36.143" ContentLicense="CC BY-SA 3.0" />
  <row Id="1898" PostTypeId="2" ParentId="1897" CreationDate="2015-09-09T15:01:46.060" Score="0" Body="&lt;p&gt;I had the same issue once, then I restart my laptop and didn't experienced anymore.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-09-09T15:01:46.060" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1899" PostTypeId="1" CreationDate="2015-09-09T15:06:42.667" Score="6" ViewCount="1827" Body="&lt;p&gt;I have &quot;elementary OS 0.3.1 Freya 32-bit&quot;. I tried to deploy Chrome Remote Desktop according to &lt;a href=&quot;http://www.elementarynow.com/chrome-remote-desktop/&quot; rel=&quot;nofollow&quot;&gt;this manual&lt;/a&gt;, but unsuccessfully. I can connect just using green &quot;Share&quot; button and one-time access code, but I cannot connect via &quot;My Computers&quot; section in Chrome Remote Desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try to connect, I receive the following error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;The remote computer is not responding to connection requests. Please verify that it is online and try again.&quot; &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Can you help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More details:&#xA;File &lt;code&gt;~/.chrome-remote-desktop-session&lt;/code&gt; contains&lt;br&gt;&#xA;&lt;code&gt;exec /usr/sbin/lightdm-session &quot;gnome-session --session=pantheon&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2332" LastEditorUserId="5722" LastEditDate="2016-09-21T15:10:31.920" LastActivityDate="2018-02-17T16:01:28.917" Title="How to install and configure Chrome Remote Desktop" Tags="|release-freya|google-chrome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1900" PostTypeId="1" AcceptedAnswerId="1901" CreationDate="2015-09-09T15:57:42.563" Score="1" ViewCount="1163" Body="&lt;p&gt;Is it possible to keep the Plank dock in front of maximised windows? I checked the Preferences menu but could not find the right combination of settings to let the dock appear in front of maximised windows without having the windows to be shrinked to not overlay with the dock.&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-09-09T16:49:03.623" Title="How to show Plank dock in front of maximised windows?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1901" PostTypeId="2" ParentId="1900" CreationDate="2015-09-09T16:49:03.623" Score="3" Body="&lt;p&gt;This is not possible. Plank doesn't offer a hide mode that will always overlap maximized windows.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-09T16:49:03.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1902" PostTypeId="2" ParentId="1896" CreationDate="2015-09-09T18:38:11.067" Score="7" Body="&lt;p&gt;With the move to headerbar, toolbar customization was dropped. This gsettings key no longer has any affect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To move up a directory, you can click the next directory up in the breadcrumb bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use the shortcut &lt;kbd&gt;alt&lt;/kbd&gt; + &lt;kbd&gt;↑&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-09T18:38:11.067" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1903" PostTypeId="1" CreationDate="2015-09-10T00:53:42.507" Score="2" ViewCount="429" Body="&lt;p&gt;It doesn't show on update manager (as someone told it could be done thay way); Also, I updated kernel to .19 version but updater has new updates for .16 version... I have ppa installed, should I keep them? On updater settings, should all options be &quot;ticked as ok&quot;?&lt;/p&gt;&#xA;" OwnerUserId="1170" LastActivityDate="2015-09-13T15:26:42.367" Title="How can I upgrade Freya 0.3 to 0.3.1?" Tags="|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1906" PostTypeId="1" AcceptedAnswerId="1907" CreationDate="2015-09-10T04:05:52.133" Score="3" ViewCount="588" Body="&lt;p&gt;In all flavors of Ubuntu and Windows,we can select multiple consecutively appearing files and directories in the file manager by clicking on the first folder,pressing and holding the shift key and then select the last folder. This way all files and folders from the first one to last one get selected. But in elementary OS, on doing the same the files/folders get selected in a very erratic fashion,sometimes there being a vertical or rectangular shaped selection and omitting all other files outside the rectangle. Is there a workaround to this?&lt;/p&gt;&#xA;" OwnerUserId="1128" LastActivityDate="2015-09-10T10:35:02.900" Title="Cannot select consecutive files using shift key + mouse click" Tags="|pantheon-files|user-interface|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-11T22:43:39.223" ContentLicense="CC BY-SA 3.0" />
  <row Id="1907" PostTypeId="2" ParentId="1906" CreationDate="2015-09-10T07:25:25.130" Score="4" Body="&lt;p&gt;This is a bug in elementary. You will find the details here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1399674&quot; rel=&quot;nofollow&quot;&gt;strange behavior when selecting multiple files/folders with shift in pantheon-files&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also says that this happens only when you are viewing the file-manager&#xA;in grid view/thumbnail view. This doesn't happen in the other two views(list and column view)  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A workaround would be to select multiple files/folders using ctrl + click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, change the view from grid to column or list(whichever you prefer).&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-10T07:25:25.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1908" PostTypeId="1" AcceptedAnswerId="1909" CreationDate="2015-09-10T07:41:55.543" Score="2" ViewCount="728" Body="&lt;p&gt;I've tried to install hplip-3.15.7.run which I downloaded from hplipopensource. When I run the file, I always get stuck on the missing required dependencies as below. It does not give specific dependencies that I need to install.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;h2&gt;MISSING DEPENDENCIES&lt;/h2&gt;&#xA;  &#xA;  &lt;p&gt;Following dependencies are not installed. HPLIP will not work if all REQUIRED dependencies are not installed and some&#xA;  of the HPLIP features will not work if OPTIONAL dependencies are not&#xA;  installed. Package-Name         Component            Required/Optional&#xA;  libnetsnmp-devel     network              REQUIRED&lt;br&gt;&#xA;  sane-devel           scan                 REQUIRED             xsane&lt;br&gt;&#xA;  scan                 OPTIONAL             gcc                  base&lt;br&gt;&#xA;  REQUIRED             dbus                 fax&lt;br&gt;&#xA;  REQUIRED&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="2336" LastActivityDate="2015-09-10T09:42:03.937" Title="Unable to install HPLIP 3.15.7 because of dependencies" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1909" PostTypeId="2" ParentId="1908" CreationDate="2015-09-10T09:42:03.937" Score="2" Body="&lt;p&gt;You will find the dependency list for HPLIP here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://hplipopensource.com/hplip-web/install/manual/distros/other.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;HPLIP Dependency List&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a blog showing guidelines on installing HPLIP and it's dependencies on elementary:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://michael-peeters.blogspot.in/2013/10/hp-printer-setup-under-elementary-os_20.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;HP Printer Setup Under Elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And here is a similar question like yours which says, if you are using elementary 0.3.1, you need to choose ubuntu 15.04 in the download area of the HPLIP website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1871/how-do-i-install-the-new-version-of-hplip&quot;&gt;Install New Version Of HPLIP&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-10T09:42:03.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1911" PostTypeId="2" ParentId="1617" CreationDate="2015-09-10T13:32:52.157" Score="2" Body="&lt;p&gt;To remove duplicates from your repositories' list, go to &lt;code&gt;Settings&lt;/code&gt;, then &lt;code&gt;Software &amp;amp; Updates&lt;/code&gt; and hit the &lt;code&gt;Other software&lt;/code&gt; tab. There, you can remove the duplicate repositories and uncheck the ones you don't want to pick updates from; if you're not concerned with elementary OS &lt;em&gt;development&lt;/em&gt;, you can safely uncheck all the repositories containing the &lt;code&gt;(Source code)&lt;/code&gt; label into the name. Then, try again to update, using the &lt;code&gt;Software Updater&lt;/code&gt; utility or typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoclean&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;into the &lt;code&gt;Terminal&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user968" LastActivityDate="2015-09-10T13:32:52.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1912" PostTypeId="1" CreationDate="2015-09-10T14:36:13.237" Score="5" ViewCount="1231" Body="&lt;p&gt;I am new to the elementary OS Freya. Have been using Ubuntu for good time now. I upgraded the system in the morning and after upgrading, the file manager &quot;Files&quot; wouldn't open up. There were a few problems in the Mozilla Firefox after the upgrade though couldn't really get the reason for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing &quot;Files&quot; again and also installed &quot;Pantheon&quot; but to no avail. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to run nautilus from the terminal to access the files but that gave plenty of errors in the terminal window.&lt;/p&gt;&#xA;" OwnerUserId="2339" LastEditorUserId="26" LastEditDate="2015-09-10T16:21:53.647" LastActivityDate="2016-09-18T20:19:22.190" Title="Pantheon Files will not open in Freya after updating" Tags="|pantheon-files|updates|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1913" PostTypeId="1" CreationDate="2015-09-10T14:39:00.877" Score="0" ViewCount="550" Body="&lt;p&gt;Everything I try to print (pages, pdfs), it will print random characters/symbols. Any idea how to fix this? Using recently installed version of Freya.&lt;/p&gt;&#xA;" OwnerDisplayName="user2277" LastActivityDate="2015-10-05T18:28:08.647" Title="HP Officejet 5740 printer random characters and symbols" Tags="|printer|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1914" PostTypeId="2" ParentId="1913" CreationDate="2015-09-10T15:48:53.940" Score="0" Body="&lt;p&gt;Seems to be printer issue according to hp.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Got this from this page here: &lt;a href=&quot;http://support.hp.com/us-en/document/c01954177&quot; rel=&quot;nofollow&quot;&gt;Continuous Pages of Strange or Garbled Characters Print&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Communication issues between a computer running a Windows operating system and your HP printer might result in pages of garbled text that look like gibberish, or nonsense, or the letters could be scrambled. The text might include a partial page or a full page of random or unrecognizable letters and numbers. This issue is not related to ink or print quality. Do not perform common print quality troubleshooting steps, such as cleaning the printheads.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Here's a page from &lt;a href=&quot;http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/prints-random-symbols-amp-characters-at-the-top-of-the-page/td-p/1877377&quot; rel=&quot;nofollow&quot;&gt;hp support forum&lt;/a&gt; addressing the same issue, which in turn sends the user &lt;a href=&quot;http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=412144&amp;amp;docId=emr_na-bpl06361&amp;amp;lang=en&amp;amp;cc=us&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. This contains explanations for unexpected printer issue and also steps to troubleshoot the problem.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps. &lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-10T15:48:53.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1915" PostTypeId="2" ParentId="1913" CreationDate="2015-09-10T16:35:25.997" Score="2" Body="&lt;p&gt;Accoring to the official HPLIP-homepage &lt;a href=&quot;http://hplipopensource.com/hplip-web/models/officejet/officejet_5740_series.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;your printer needs al least HPLIP version 3.14.10&lt;/a&gt;.&lt;br&gt;&#xA;Unfortunately elementary OS only provides HPLIP version 3.14.3 in it's repositories.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install the latest version of HPLIP in order to get your printer running. I'd suggest you take a look at &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1909/22&quot;&gt;godslayer_69's answer&lt;/a&gt; to a familiar question, the installation seems to be a little bit tricky.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-05T18:28:08.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1916" PostTypeId="2" ParentId="1083" CreationDate="2015-09-10T17:09:30.263" Score="7" Body="&lt;h1&gt;In the Terminal&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Set the indicator to show extra locations.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime show-locations true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Set which locations to show.&lt;/strong&gt; Timezones are in the format &lt;code&gt;Continent/City_Name City Name&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime locations &quot;['America/Los_Angeles Los Angeles', 'America/New_York New York', 'Europe/London London', 'Europe/Paris Paris', 'Asia/Tokyo Tokyo']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To undo your changes&lt;/strong&gt;, you can simply hide the locations again.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime show-locations false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="218" LastEditDate="2015-12-30T23:01:40.070" LastActivityDate="2015-12-30T23:01:40.070" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1917" PostTypeId="1" AcceptedAnswerId="1973" CreationDate="2015-09-11T01:20:28.743" Score="2" ViewCount="1255" Body="&lt;p&gt;I've been using a script to display a notification via notify-send that showed the volume level on my pc. (this script is called from a keybinding trigger that also lowers/raises the volume, and then reports the current volume with this script). the script is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;exec /usr/bin/notify-send &quot; &quot; -i notification-audio-volume-high -h int:value:&quot;$(amixer -c &quot;CA0106&quot; -q | grep -A5 Master | grep '%' | cut -d'[' -f2 | cut -d']' -f1)&quot; -h string:synchronous:volume&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked well on Ubuntu, but doesn't seem to work properly on elementary. The notification shows, but it doesn't display the volume level, and also a new notification shows every time the button is pressed instead pf refreshing itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can fix this because the built-in notification associated with the dedicated volume buttons works perfectly, so I guess I need to adjust my code so it works properly on elementary. can anyone give me a hand with this? how can I send an audio notification in elementary?&#xA;Thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tldr: &#xA;bassically the command &lt;code&gt;notify-send &quot; &quot; -h int:value:99 -h string:synchronous:volume&lt;/code&gt; is ignoring the parameter &lt;code&gt;-h int:value:number&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2341" LastEditorUserId="2341" LastEditDate="2015-09-14T02:28:02.380" LastActivityDate="2015-09-20T14:44:12.900" Title="help with volume notification script, notify-send" Tags="|release-freya|ubuntu|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1919" PostTypeId="1" CreationDate="2015-09-11T04:36:35.497" Score="11" ViewCount="576" Body="&lt;p&gt;I want a &quot;multitasking view&quot; hotcorner on my second monitor, but the hot corner settings only give the options to set them for my primary display. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How would I accomplish this?&lt;/p&gt;&#xA;" OwnerUserId="2343" LastEditorUserId="2343" LastEditDate="2019-01-07T15:54:18.860" LastActivityDate="2019-01-07T15:54:18.860" Title="How to set hot corners on a second display" Tags="|settings|display|hot-corners|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="1921" PostTypeId="2" ParentId="1917" CreationDate="2015-09-11T11:37:40.463" Score="0" Body="&lt;p&gt;You could use a python script. &#xA;See this snippet: &lt;a href=&quot;https://paste.debian.net/311290&quot; rel=&quot;nofollow&quot;&gt;https://paste.debian.net/311290&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-09-11T11:37:40.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1922" PostTypeId="1" CreationDate="2015-09-11T14:09:28.737" Score="1" ViewCount="36" Body="&lt;p&gt;The set up window expands on the bottom larger then screen size, so I can't finish the set up process? Possibly I just need to press some yes button. tried with pressing enter, but this just changes my settings in the Geary set up window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2347" LastActivityDate="2015-10-01T21:27:21.590" Title="Geary set up &quot;other&quot; provider on Asus 1000he doesnt work" Tags="|settings|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1923" PostTypeId="2" ParentId="1717" CreationDate="2015-09-11T15:16:13.533" Score="2" Body="&lt;p&gt;Menu items in elementary OS do not normally have icons.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-11T16:49:51.650" LastActivityDate="2015-09-11T16:49:51.650" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1924" PostTypeId="1" AcceptedAnswerId="1931" CreationDate="2015-09-11T15:26:34.770" Score="4" ViewCount="4713" Body="&lt;p&gt;Does the newest version of elementary OS installer have the option to do full disk encryption during install? If not how would I go about it? I found &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/1zevl6/encrypting_entire_osdrive/&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; reddit thread, is it still relevant?&lt;/p&gt;&#xA;" OwnerUserId="2351" LastEditorUserId="34" LastEditDate="2015-09-14T09:38:18.410" LastActivityDate="2021-09-09T05:48:24.913" Title="Full disk encryption" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1925" PostTypeId="1" CreationDate="2015-09-11T15:38:44.563" Score="0" ViewCount="312" Body="&lt;p&gt;I have weird purple login screen, I don't know why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HhrNh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HhrNh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2352" LastEditorUserId="45" LastEditDate="2015-09-11T16:48:15.340" LastActivityDate="2015-09-11T16:48:15.340" Title="I've accidentally installed a different Greeter. How can I get Pantheon Greeter back?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1928" PostTypeId="2" ParentId="1925" CreationDate="2015-09-11T16:47:07.480" Score="1" Body="&lt;p&gt;It looks like you've somehow installed the Ubuntu Unity greeter. This may have been pulled in when you installed something else Ubuntu or Unity-related. Remember to be very careful when copying commands from the Internet and to pay close attention to what packages might be installed or removed when you do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to get the normal greeter back by removing &lt;code&gt;unity-greeter&lt;/code&gt; and re-installing &lt;code&gt;pantheon-greeter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-11T16:47:07.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1931" PostTypeId="2" ParentId="1924" CreationDate="2015-09-11T20:19:02.393" Score="5" Body="&lt;p&gt;There is an option to encrypt the disk when you select the device for partitioning in the installer setup. This will encrypt the entire disk and not just the home partition (assuming you use the default partition scheme which is just one ext4 partition and one swap partition).&lt;/p&gt;&#xA;" OwnerUserId="383" LastActivityDate="2015-09-11T20:19:02.393" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1932" PostTypeId="1" CreationDate="2015-09-11T21:01:57.880" Score="2" ViewCount="37" Body="&lt;p&gt;I have never installed Linux on a machine before and I am having issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using an HP Omen laptop and wanted to install elementary OS on it in way so that I could use Windows 8.1 (already installed) or elementary OS. I followed the installation guide on &lt;a href=&quot;https://elementary.io/docs/installation#download-elementary-os&quot; rel=&quot;nofollow&quot;&gt;elementary's website&lt;/a&gt; and was able to boot from the flash drive. I selected the option to install elementary OS, followed the onscreen prompts, selected to install elementary OS alongside Windows, and chose my partition size. The installation went successfully and informed me that to use the installation, I had to restart my machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon clicking restart, the machine booted straight into Windows. I restarted the machine, went into the BIOS, and looked at the boot order options. A new option had appeared called something along the lines of &lt;code&gt;GRUB&lt;/code&gt;. I selected to boot to this and restarted the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This time, instead of booting straight to windows, the computer booted to a black screen with some text on it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GNU GRUB version 2.02~beta2-9&#xA;Minimal BASH-like line editing is supported...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From here I understand that I can enter some commands, however, I have never used Linux before and I am unable to get elementary OS to boot. I have searched for and looked through some guides, but I don't understand them well enough to solve my issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to know how to get elementary OS to start up, or if I did something wrong during the installation and what I can do to fix it. Thanks for any help.&lt;/p&gt;&#xA;" OwnerUserId="2357" LastEditorUserId="3757" LastEditDate="2016-05-04T10:19:24.137" LastActivityDate="2016-05-04T10:19:24.137" Title="Can't boot into elementary OS" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="1" ClosedDate="2015-09-12T10:30:45.143" ContentLicense="CC BY-SA 3.0" />
  <row Id="1933" PostTypeId="1" CreationDate="2015-09-11T22:10:29.467" Score="12" ViewCount="22440" Body="&lt;p&gt;I swear there is a way to make the icons magnify like on a mac osx when you mouse hovers over them (I don't know what I did but i had this effect until recently I updated plank and it's gone).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently on a Elementary OS Freya&lt;/p&gt;&#xA;" OwnerUserId="1153" LastEditorDisplayName="user170" LastEditDate="2017-10-28T13:50:35.877" LastActivityDate="2020-03-18T14:20:19.383" Title="Plank magnifying effect" Tags="|plank|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1934" PostTypeId="2" ParentId="1933" CreationDate="2015-09-12T03:43:05.613" Score="20" Body="&lt;p&gt;elementary is unable to ship a version of Plank with this code because of the Apple software patents. The version we ship has the feature patched out to avoid litigation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can get the upstream version of Plank from &lt;a href=&quot;https://launchpad.net/~ricotz/+archive/ubuntu/docky&quot;&gt;Rico's PPA&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-12T03:43:05.613" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="1935" PostTypeId="1" AcceptedAnswerId="10168" CreationDate="2015-09-12T05:06:24.907" Score="3" ViewCount="639" Body="&lt;p&gt;I'm trying to install Elementary one a spare computer that I'm going to give to my nephew - I don't have a monitor but the computer has an HDMI input so I plug it into my television and try install it, for some reason the install screen just blows up my resolution, normally I can see the entire install screen but when I use elementary I only see the top 25% of my screen blown up huge. I've tried two different USB pen drives - downloaded the ISO two different times, and it still happens has anyone seen this occur - any solutions?&lt;/p&gt;&#xA;" OwnerUserId="2360" LastActivityDate="2017-02-14T17:39:09.680" Title="Install resolution" Tags="|system-installation|resolution|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1936" PostTypeId="1" CreationDate="2015-09-12T05:33:40.390" Score="2" ViewCount="311" Body="&lt;p&gt;I found Gloobus-preview and thought it's kinda cool. Is there any way to get this to work in Files? Tried using the configurator and change the previewer path to use Gloobus but it's not working on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.webupd8.org/2015/01/quick-file-previewer-gloobus-preview.html&quot; rel=&quot;nofollow&quot;&gt;Gloobus previewer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2336" LastActivityDate="2016-08-26T18:51:47.010" Title="Gloobus-preview not working in Freya 0.3.1?" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1937" PostTypeId="1" AcceptedAnswerId="1971" CreationDate="2015-09-12T08:05:19.613" Score="1" ViewCount="17454" Body="&lt;p&gt;After installing elementary OS at the end I got an error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop originally had dual-boot with windows 8 and Ubuntu 14.04. I decided to replace Ubuntu 14.04 with elementary OS Freya, so I cleared the partition where ubuntu was installed using gparted and upon installing I chose the option which allows to install alongside windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation was completed I got a prompt:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;the grub-pc package failed to install into /target&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then it allowed me to select different partitions, but still failed to install. So continued without installing grub. After rebooting, I get a prompt:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;grub &gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This is currently what my partitions are after installing:&#xA;&lt;code&gt;/dev/sda11&lt;/code&gt; is where elementary OS is installed.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GyXBZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GyXBZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using super grub2 disk when in my cdrom and choosing the partition confirms that I elementary OS was installed and can be run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem I am having with is with grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After trying boot-repair, here is the bootinfo summary:&#xA;&lt;a href=&quot;http://paste.ubuntu.com/12365516/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/12365516/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&#xA;In the &lt;code&gt;grub&lt;/code&gt; prompt if I enter&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;set root=(hd0,gpt11)&#xA;  set proxy=(hd0,gpt11)/boot/grub&#xA;  insmod normal&#xA;  normal&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;it takes me to the grub menu where I can select elementary OS or windows&#xA;and selecting elementary OS boots the operating system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the post on the question here &lt;a href=&quot;https://askubuntu.com/questions/192621/grub-rescue-prompt-repair-grub&quot;&gt;https://askubuntu.com/questions/192621/grub-rescue-prompt-repair-grub&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried following most of the solutions except the one involving boot-repair. But none worked for me.&lt;/p&gt;&#xA;" OwnerUserId="140" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-05-07T04:15:26.470" Title="The grub-pc package failed to install into /target after installtion" Tags="|release-freya|dual-boot|microsoft-windows|grub|" AnswerCount="2" CommentCount="5" ClosedDate="2015-09-16T09:59:55.297" ContentLicense="CC BY-SA 3.0" />
  <row Id="1938" PostTypeId="2" ParentId="1883" CreationDate="2015-09-12T11:03:03.587" Score="1" Body="&lt;p&gt;I think your system can't load fancontrol driver.  You can try editing your grub file :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and modifying the line ending with &quot;quiet splash&quot; to look like :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT &quot;quiet splash acpi_enforce_resources=lax&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the file and:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After reboot you must install appropriated software like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lm-sensors xsensors fancontrol &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More information at &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://hydra.geht.net/tino/howto/linux/fixes/w83627hf/&quot; rel=&quot;nofollow&quot;&gt;Fix lm modules&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-09-12T11:03:03.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1939" PostTypeId="1" CreationDate="2015-09-12T14:54:15.253" Score="1" ViewCount="56" Body="&lt;p&gt;I am experiencing difficulties with the display due to triangular fragmentation, and can't use the OS at all yet, the glitching is so bad that most windows are obscured at least partially by a triangular shape. These shapes follow and distort as a window is moved about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use an HP 5730 thin client, with 1gb ram, 24gb HD, ATI x1250 video.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried many other versions of linux on this machine, but have not seen this display corruption before, on any of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="2366" LastActivityDate="2015-09-12T14:54:15.253" Title="Display fragmentation on Freya 0.3.1 (64 bit)" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1940" PostTypeId="1" AcceptedAnswerId="7648" CreationDate="2015-09-12T15:36:39.737" Score="2" ViewCount="114" Body="&lt;p&gt;I am just curious, on &lt;a href=&quot;http://blog.elementary.io/post/128271333121/freya-031-is-here&quot; rel=&quot;nofollow&quot;&gt;http://blog.elementary.io/post/128271333121/freya-031-is-here&lt;/a&gt; you can find this statement:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;We’re very proud to share some elementary OS download stats as well!&#xA;  So far, elementary OS has been downloaded an estimated 5 million&#xA;  times.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Are those 5 million downloads just for the 0.3.1 version?&lt;/p&gt;&#xA;" OwnerUserId="2368" LastEditorUserId="26" LastEditDate="2016-09-11T19:05:49.143" LastActivityDate="2016-09-11T19:06:20.603" Title="What are the download stats for elementary OS?" Tags="|download|stats|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1941" PostTypeId="1" CreationDate="2015-09-12T15:48:50.620" Score="5" ViewCount="1326" Body="&lt;p&gt;I'm on Sony Vaio laptop; I booted from USB and tried elementary which worked well. I then installed using the entire drive with the &quot;Download updates while installing&quot;. The install finishes and I click the &quot;Restart&quot; button. Then I get a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's actually a terminal, but I can see one letter at a time in top left of the screen. I tried &lt;em&gt;reboot&lt;/em&gt; which worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing without internet and had the same results. I haven't been able to install it. It's odd that I could use elementary OS when booted from USB, but it wouldn't work via install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried replacing &lt;code&gt;quiet&lt;/code&gt; and &lt;code&gt;quiet splash&lt;/code&gt; with &lt;code&gt;nomodeset&lt;/code&gt; which ended up with the same result. &lt;/p&gt;&#xA;" OwnerUserId="2369" LastEditorUserId="3757" LastEditDate="2016-05-07T04:17:37.543" LastActivityDate="2016-05-07T04:17:37.543" Title="Black screen after install" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="0" ClosedDate="2016-03-09T22:47:34.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="1942" PostTypeId="2" ParentId="1941" CreationDate="2015-09-12T16:12:47.423" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failure-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failure when I installed 0.3.1?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should temporary solve your problem, Freya 0.3.1 doesn't work correctly in UEFI mode.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Keep in mind that this is only a workaround!&lt;/h2&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801/comments/5&quot; rel=&quot;nofollow&quot;&gt;Rob Hartley (8ob):&lt;/a&gt;&lt;/strong&gt; This is only a workaround though. The real question is why this happens in the first place. I did not receive any errors during&#xA;  installation that would suggest grub failed to configure the system properly.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Elementary 0.3.1 as normal (no special partitioning).&lt;br&gt;Follow: &lt;a href=&quot;https://elementary.io/de/docs/installation#download-elementary-os&quot; rel=&quot;nofollow&quot;&gt;elementary.io - Installation&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot will end in &lt;code&gt;grub shell&lt;/code&gt;. Enter:&lt;br&gt;&lt;code&gt;configfile (hd&lt;/code&gt; and press &lt;kbd&gt;TAB&lt;/kbd&gt;. Select one and add &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;&lt;br&gt;Example: &lt;code&gt;configfile (hd0, gpt4)/boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal after boot and type:&lt;br&gt;&lt;code&gt;cd /boot/efi/EFI/grub&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp grubx64.efi grubx64.efi.backup&lt;/code&gt; (just in case)&lt;br&gt;&lt;code&gt;sudo rm grubx64.efi&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp /boot/grub/x86_64-efi/grub.efi /boot/efi/EFI/grub/grubx64.efi&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt; &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot;&gt;Freya UEFI install boots to grub prompt&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2015-09-12T16:12:47.423" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1943" PostTypeId="1" CreationDate="2015-09-12T16:16:20.330" Score="5" ViewCount="3249" Body="&lt;p&gt;Elementary OS, 0.3.1, 64-bit.  The top bar has the date, but I would love to expand the date to read in full, for example, today, &quot;Saturday, September 12, 2015  9:15 AM&quot;.  I can't see a way to do that.  Can someone assist me?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="458" LastEditorUserId="45" LastEditDate="2015-09-12T22:37:40.407" LastActivityDate="2018-04-29T16:19:31.043" Title="Can I change the date format in the panel?" Tags="|settings|wingpanel|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1944" PostTypeId="2" ParentId="1943" CreationDate="2015-09-12T18:24:19.773" Score="6" Body="&lt;p&gt;It's possible to change date &amp;amp; time format in Wingpanel, but there is no direct UI for this kind of setting.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can either install and run &lt;code&gt;dconf-editor&lt;/code&gt;, navigate to &lt;em&gt;com -&gt; canonical -&gt; indicator -&gt; datetime&lt;/em&gt;, switch &lt;code&gt;custom-time&lt;/code&gt; from &lt;code&gt;locale-default&lt;/code&gt; to &lt;code&gt;custom&lt;/code&gt; and change &lt;code&gt;custom-time-format&lt;/code&gt; into &lt;code&gt;%A, %d %B %Y, %I:%M&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U41rC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U41rC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or&lt;/strong&gt; you open your terminal and run the followng two commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime time-format &quot;custom&quot;&#xA;gsettings set com.canonical.indicator.datetime custom-time-format &quot;%A, %d %B %Y, %I:%M&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The changes should take effect immediately in both ways.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-09-12T20:28:59.267" LastActivityDate="2015-09-12T20:28:59.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1946" PostTypeId="1" CreationDate="2015-09-12T21:03:40.317" Score="37" ViewCount="26381" Body="&lt;p&gt;Is there anyway to open up the applications menu with only the windows key, and not the Windows+Space Bar?&lt;/p&gt;&#xA;" OwnerUserId="2370" LastEditorUserId="16827" LastEditorDisplayName="user170" LastEditDate="2019-12-16T03:34:27.777" LastActivityDate="2020-07-29T04:19:36.283" Title="Have application menu open up with only Windows/Super key" Tags="|release-freya|slingshot|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1948" PostTypeId="1" CreationDate="2015-09-12T22:04:58.470" Score="2" ViewCount="262" Body="&lt;p&gt;First time elementary OS user, long time Ubuntu (Gnome) user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed Freya today and I have a couple of issues with indicators.  First, Dropbox indicator isn't showing (found a &lt;a href=&quot;http://www.elementarynow.com/quick-tip-restoring-dropbox-indicator/&quot; rel=&quot;nofollow&quot;&gt;post&lt;/a&gt; that should fix that, waiting for long-running git checkout so I an log out and test it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an indicator that was written by my employer that shows me my security status and allows me to view a report.  It works in ubuntu (and Gnome-Shell, via the notification tray) but can't find it in Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have Symantec Antivirus installed and its indicator shows up in the dock as a running application, which is annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can these issues be fixed?  In Gnome-Shell there's an extension that adds what they call &quot;legacy&quot; indicator to the Gnome-Shell indicators.  Is there something similar in Elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, Kevin&lt;/p&gt;&#xA;" OwnerUserId="2372" LastActivityDate="2015-09-14T13:35:42.510" Title="How can I access &quot;legacy&quot; indicators in Elementary?" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-03T01:45:11.770" ContentLicense="CC BY-SA 3.0" />
  <row Id="1949" PostTypeId="1" CreationDate="2015-09-13T01:03:16.233" Score="3" ViewCount="1055" Body="&lt;p&gt;I'm trying to make my two bottom corners switch between workspaces. The solution I had in mind was to create a custom script which would switch between workspaces based on the argument you pass into it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For my script, I had to install:&#xA;&lt;code&gt;sudo apt-get install wmctrl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And my script is this (which works btw):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;work=`wmctrl -d` | grep '*' | grep -o '^[0-9]'&#xA;if [[ $1 == &quot;left&quot; ]]; then&#xA;  wmctrl -s $((work - 1))&#xA;else&#xA;  wmctrl -s $((work + 1))&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I then realized that you can only have one custom command (˃̣̣̥᷄⌓˂̣̣̥᷅ ) ... So I can't place &lt;code&gt;left&lt;/code&gt; and &lt;code&gt;right&lt;/code&gt; into the arguments for my script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did anyone find a way to get hot corners working this way?&lt;/p&gt;&#xA;" OwnerUserId="2373" LastActivityDate="2017-02-09T19:49:16.560" Title="Workspace Switch Hot Corner" Tags="|settings|hot-corners|shell|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1950" PostTypeId="1" CreationDate="2015-09-13T01:09:02.370" Score="5" ViewCount="406" Body="&lt;p&gt;I would like to have removable drives show up on the dock every time one is plugged in. Is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe a udev rule could do this if it is not a feature of Plank?&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-10-26T05:54:35.227" Title="Is is possible to show removable drives on Plank?" Tags="|plank|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1951" PostTypeId="1" AcceptedAnswerId="1968" CreationDate="2015-09-13T01:19:22.140" Score="2" ViewCount="4831" Body="&lt;p&gt;In Elementary OS Luna, I was able to disable Plank by going into the dconf settings and removing Plank from the &lt;code&gt;monitored-processes&lt;/code&gt; in &lt;code&gt;org.pantheon.cerbere&lt;/code&gt;. I installed the newer Freya and now this won't work. How do I disable Plank?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstalling Plank isn't really an option since IIRC it messes with other dependencies that I have of already installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;P.S.&lt;/strong&gt;: Yep, it removes elementary tweaks if I try to uninstall plank, which I don't want.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;jonathan@jonathan-elementary:~$ sudo apt-get remove plank&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  gtk3-engines-unico libgrip0 libtimezonemap1 plank-theme-pantheon sbsigntool&#xA;Use 'apt-get autoremove' to remove them.&#xA;The following packages will be REMOVED:&#xA;  elementary-tweaks plank&#xA;0 upgraded, 0 newly installed, 2 to remove and 32 not upgraded.&#xA;After this operation, 1,473 kB disk space will be freed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2373" LastEditorUserId="2373" LastEditDate="2015-09-13T16:13:49.223" LastActivityDate="2023-06-15T18:39:44.227" Title="How to Disable Plank" Tags="|plank|dconf|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1953" PostTypeId="1" CreationDate="2015-09-13T02:34:32.073" Score="4" ViewCount="4322" Body="&lt;p&gt;I recently switched to Elementary OS from a Fedora/Windows 7 dual boot. I have Geary set up with my gmail account and I really like it. I'm trying to set it up with my university email as well, but I can't seem to get it to work. The university website gave these instructions for setting up unsupported webmail clients (&lt;a href=&quot;http://www.uregina.ca/is/student/email/&quot; rel=&quot;nofollow&quot;&gt;http://www.uregina.ca/is/student/email/&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;IMAP server - imap.uregina.ca&#xA;SMTP server - smtp.uregina.ca - Outgoing mail server port 587 (Setup with Authentication, not SSL and input your email username and password)   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The settings I am using are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Service: Other&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;IMAP&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Server: imap.uregina.ca Port: 143&#xA;Username: email@domain.ca&#xA;Encryption STARTTLS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SMTP&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Server: smtp.uregina.ca Port: 587&#xA;Username: email@domain.ca&#xA;Encryption STARTTLS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I keep getting these errors:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unable to validate:&#xA;IMAP connection error. SMTP connection error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have this email set up on the gmail app on my phone and I used none as the security type, so I've tried using none of the encryption settings and I've tried removing the @domain.ca from the username but neither of those seem to fix my issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="2374" LastActivityDate="2020-11-30T05:35:13.827" Title="Can't Connect my University email to Geary" Tags="|pantheon-mail|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="1954" PostTypeId="1" CreationDate="2015-09-13T03:33:35.937" Score="2" ViewCount="563" Body="&lt;p&gt;I've noticed that my WiFi would suddenly disconnected and not listed in the available WiFi network list. I have to turn on airplane mode/disable WiFi to get it connected back or listed in the list. The other way is to go to &lt;strong&gt;Connect to Hidden WiFi network&lt;/strong&gt; and select my network from the list. A quick check on the listed question says mostly a realtek driver issue but I'm using Qualcomm Atheros. Below is my &lt;code&gt;lshw -c network&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network               &#xA;       description: Wireless interface  &#xA;       product: AR9285 Wireless Network Adapter (PCI-Express)  &#xA;       vendor: Qualcomm Atheros  &#xA;       physical id: 0  &#xA;       bus info: pci@0000:43:00.0  &#xA;       logical name: wlan0  &#xA;       version: 01  &#xA;       serial: 78:e4:00:98:42:7c  &#xA;       width: 64 bits  &#xA;       clock: 33MHz  &#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless  &#xA;       configuration: broadcast=yes driver=ath9k driverversion=3.19.0-28-generic firmware=N/A ip=192.168.1.67 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn  &#xA;       resources: irq:19 memory:d0700000-d070ffff  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2336" LastEditorUserId="3757" LastEditDate="2016-05-03T07:46:08.610" LastActivityDate="2016-05-03T07:46:08.610" Title="WiFi disconnected and hidden from SSID (available wifi network) list" Tags="|release-freya|system|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1955" PostTypeId="2" ParentId="1954" CreationDate="2015-09-13T06:29:23.070" Score="1" Body="&lt;p&gt;The fact that it works fine for a period seems to indicate faulty power saving mode in the Ath9k driver. You can try to disable this with the following methods.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;Disable WiFi Power Saving&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Temporary&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwconfig wlan0 power off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(or)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r ath9k&#xA;sudo modprobe ath9k ps_enable=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Permanent&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /etc/modprobe.d/ath9k.conf&#xA;sudo scratch-text-editor /etc/modprobe.d/ath9k.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;options ath9k ps_enable=0&lt;/code&gt; as the last line&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-09-13T06:29:23.070" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1956" PostTypeId="1" CreationDate="2015-09-13T08:16:40.937" Score="0" ViewCount="545" Body="&lt;p&gt;I have a grub failure after I install the elementary 0.3.1 freya. There is NOWwindows or other Linux OS installed , solo elementary. I got a Intel Core i7 6700 Skylake CPU, Asrock z170 motherboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I later tried the Ubuntu 15.04, no problem booting, but have serious bug: whenever I watch Youtube, it dies, mouse frozen, no response at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has idea how to deal with it ? Much appreciated. &lt;/p&gt;&#xA;" OwnerUserId="2377" LastEditorUserId="3757" LastEditDate="2016-05-06T14:32:46.623" LastActivityDate="2016-05-06T14:32:46.623" Title="Grub failure, Intel Core i7 6700 Skylake" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-16T09:59:27.380" ContentLicense="CC BY-SA 3.0" />
  <row Id="1957" PostTypeId="2" ParentId="1956" CreationDate="2015-09-13T10:13:38.143" Score="2" Body="&lt;p&gt;OK, I use the method posted here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failure-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1?&lt;/a&gt;, and I did boot in !!!!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the second problem, I enable the i915.preliminary_hw_support=1. Still testing, but for now, everything is OK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The kernel is 3.19.0-28&lt;/p&gt;&#xA;&#xA;&lt;p&gt;update: still have the problem similar to ubuntu 15.04, watch youtube, then die&lt;/p&gt;&#xA;&#xA;&lt;p&gt;update: try the 4.3 RC1 kernel, solve the problem!&lt;/p&gt;&#xA;" OwnerUserId="2377" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-17T13:49:08.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1958" PostTypeId="2" ParentId="1946" CreationDate="2015-09-13T11:14:55.420" Score="5" Body="&lt;p&gt;You can't do that through the custom shortcuts that you can set via Switchboard, which only allow combinations of 2 or more keystrokes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe it is possible using &lt;a href=&quot;http://man.cx/xbindkeys%281%29&quot; rel=&quot;noreferrer&quot;&gt;xbindkeys&lt;/a&gt;, though. &#xA;To install it (along with a GUI configurator) paste this command into a terminal window:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbindkeys-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In order to run, the program needs a config file in your home directory. Create it with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys --defaults &amp;gt; /home/YOURUSERNAME/.xbindkeysrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run the program by typing &lt;code&gt;xbindkeys-config&lt;/code&gt; into the terminal or in the search string of the application launcher. This window will fire up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xWJj3.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xWJj3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hit &quot;New&quot; to create your custom command. On the top right box you must type in all relevant information: a name for the shortcut, the key assigned to it, and the command to execute the program (in your case &lt;code&gt;slingshot-launcher&lt;/code&gt;). To get the name of the correct key use the &quot;Get Key&quot; button. A blank window will pop up. Just press your key and the program will automatically record its name code. Hit &quot;Save &amp;amp; Apply &amp;amp; Exit&quot; and you're done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the bad news: in my test I couldn't assign the Super key. I'm afraid it is already binded to other shortcuts, but I couldn't troubleshoot the issue. I was able to assign a &quot;less-used&quot; key, though, like the &quot;Pause&quot; key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;. To make this setup permanent you need to add &lt;code&gt;xbindkeys&lt;/code&gt; to your startup applications.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-13T11:14:55.420" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1959" PostTypeId="2" ParentId="1903" CreationDate="2015-09-13T11:24:52.640" Score="2" Body="&lt;p&gt;As stated in the &lt;a href=&quot;http://blog.elementary.io/post/128271333121/freya-031-is-here&quot; rel=&quot;nofollow&quot;&gt;announcement in the official blog&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you’re already running Freya, you will already have received all of&#xA;  the above (with the exception of the newly added hardware support) in&#xA;  your regular updates.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So, by normally updating your system you get the 0.3.1 release (bar the hardware enablement stack). If you want the full experience, a clean install is always recommended.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-13T11:24:52.640" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1960" PostTypeId="2" ParentId="1681" CreationDate="2015-09-13T11:31:55.650" Score="2" Body="&lt;p&gt;Hit the key combination &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt; that will open your applications menu. Once it is open, you can type in the command you need (&lt;code&gt;pantheon-terminal&lt;/code&gt;, or &lt;code&gt;switchboard&lt;/code&gt;). &lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-13T11:31:55.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1961" PostTypeId="2" ParentId="1378" CreationDate="2015-09-13T11:44:07.423" Score="1" Body="&lt;p&gt;Apparently, they removed those arrows from the UI in one of the latest updates. You can use keyboard shortcuts, though: press &lt;kbd&gt;N&lt;/kbd&gt; to go to the next page in the document, and &lt;kbd&gt;P&lt;/kbd&gt; to go to the previous page.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-13T11:44:07.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1962" PostTypeId="1" CreationDate="2015-09-13T13:34:01.460" Score="0" ViewCount="249" Body="&lt;p&gt;Before it worked in the beginning of Ubuntu 14.04 installation (same with Linux Mint Cinnamon 17.2) after hitting F6 and checking either one of:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;acpi=off&lt;/code&gt;, &lt;code&gt;nolapic&lt;/code&gt;&#xA;or &lt;code&gt;nomodeset&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Must be something with the HP BIOS since on my newer desktop PC (also with nVidia card) installation went smooth. There is not much to change there, though, just checking/unchecking UEFI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues, please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Marek&lt;/p&gt;&#xA;" OwnerUserId="2379" LastEditorUserId="3757" LastEditDate="2016-03-09T19:40:12.253" LastActivityDate="2016-03-09T19:40:12.253" Title="Not able to install elementary 64 bit OE 0.3.1 freya on HP 8740w" Tags="|release-freya|system-installation|64-bit|" AnswerCount="2" CommentCount="2" ClosedDate="2015-09-14T21:01:34.010" ContentLicense="CC BY-SA 3.0" />
  <row Id="1963" PostTypeId="2" ParentId="1903" CreationDate="2015-09-13T15:26:42.367" Score="1" Body="&lt;p&gt;I would recommend a re-install, using the 0.3.1 iso. You can do so without losing your data. See link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/269880/re-install-ubuntu-without-losing-data-in-home-folder&quot;&gt;https://askubuntu.com/questions/269880/re-install-ubuntu-without-losing-data-in-home-folder&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also do an Aptik Backup too. I've updated 3 systems to 0.3.1 using this with no data loss.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-09-13T15:26:42.367" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1965" PostTypeId="2" ParentId="1953" CreationDate="2015-09-13T16:38:33.963" Score="2" Body="&lt;p&gt;It's kind of hard to figure out since I can't replicate the issue, but I'm going to presume that the &lt;code&gt;not SSL&lt;/code&gt; part in the description on the website means that you should change the encryption method to &lt;code&gt;None&lt;/code&gt; for both IMAP and SMTP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A bit off-topic: Not supporting the encryption for you school's email is a &lt;em&gt;really bad idea&lt;/em&gt; by the school's administration.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-09-13T16:38:33.963" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1966" PostTypeId="1" AcceptedAnswerId="1967" CreationDate="2015-09-13T17:21:57.950" Score="4" ViewCount="2670" Body="&lt;p&gt;Plank can be set unhidden by setting &lt;code&gt;~/.config/plank/dock/settings&lt;/code&gt; -&gt; &lt;code&gt;HideMode=X&lt;/code&gt; -&gt; &lt;code&gt;HideMode=0&lt;/code&gt;, but how to set the maximize action to the upper edge of plank like in OS X?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Screenshot of my plank:&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ioxC4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ioxC4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Screenshot of OS X:&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vyTSu.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vyTSu.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1193" LastActivityDate="2015-11-20T18:11:34.400" Title="Keep Plank unhidden and maximize windows to plank like in OS X?" Tags="|plank|window-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1967" PostTypeId="2" ParentId="1966" CreationDate="2015-09-13T20:25:20.443" Score="4" Body="&lt;p&gt;You achieve that result by setting  the &quot;Never hide&quot; option in System settings &gt; Desktop &gt; Dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0x9D9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0x9D9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-09-15T10:19:33.383" LastActivityDate="2015-09-15T10:19:33.383" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1968" PostTypeId="2" ParentId="1951" CreationDate="2015-09-13T20:50:53.720" Score="5" Body="&lt;p&gt;The configuration was changed from &lt;code&gt;org.pantheon.cerbere&lt;/code&gt; to &lt;code&gt;org.pantheon.desktop.cerbere&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/cerbere/cerbere/revision/49&quot;&gt;http://bazaar.launchpad.net/~elementary-pantheon/cerbere/cerbere/revision/49&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I just modified the &lt;code&gt;monitored-processes&lt;/code&gt; from there and I was able to disable Plank no problem.&lt;/p&gt;&#xA;" OwnerUserId="2373" LastActivityDate="2015-09-13T20:50:53.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1969" PostTypeId="1" CreationDate="2015-09-13T22:23:32.583" Score="1" ViewCount="395" Body="&lt;p&gt;Has anyone had success installing elementary OS Freya on the HP Spectre X360? Having issues with WiFi, sound, touchscreen, etc.  Newbie to this, so need some help.&lt;/p&gt;&#xA;" OwnerUserId="2384" LastEditorUserId="16827" LastEditDate="2019-04-11T06:34:28.713" LastActivityDate="2019-04-11T06:34:28.713" Title="Install on HP Spectre x360" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1970" PostTypeId="2" ParentId="1962" CreationDate="2015-09-14T05:06:16.423" Score="0" Body="&lt;h2&gt;Keep in mind that this is only a workaround!&lt;/h2&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801/comments/5&quot; rel=&quot;nofollow&quot;&gt;Rob Hartley (8ob):&lt;/a&gt;&lt;/strong&gt; This is only a workaround though. The real question is why this happens in the first place. I did not receive any errors during&#xA;  installation that would suggest grub failed to configure the system properly.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Elementary 0.3.1 as normal (no special partitioning).&lt;br&gt;Follow: elementary.io - Installation&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot will end in &lt;code&gt;grub shell&lt;/code&gt;. Enter:&lt;br&gt;&lt;code&gt;configfile (hd&lt;/code&gt; and press &lt;kbd&gt;TAB&lt;/kbd&gt;. Select one and add &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;&lt;br&gt;Example: &lt;code&gt;configfile (hd0, gpt4)/boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal after boot and type:&lt;br&gt;&lt;code&gt;cd /boot/efi/EFI/grub&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp grubx64.efi grubx64.efi.backup&lt;/code&gt; (just in case)&lt;br&gt;&lt;code&gt;sudo rm grubx64.efi&lt;/code&gt;&lt;br&gt;&lt;code&gt;sudo cp /boot/grub/x86_64-efi/grub.efi /boot/efi/EFI/grub/grubx64.efi&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt; &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot;&gt;Freya UEFI install boots to grub prompt&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2361" LastEditorUserId="2361" LastEditDate="2015-09-14T05:16:15.820" LastActivityDate="2015-09-14T05:16:15.820" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="1971" PostTypeId="2" ParentId="1937" CreationDate="2015-09-14T05:09:19.043" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot;&gt;Check out the comments section of this bug thread.&lt;/a&gt; Freya has a know UEFI boot bug. Be sure to use your root partition as you are forcing the GRUB to load the file from the install. &lt;/p&gt;&#xA;" OwnerUserId="2361" LastActivityDate="2015-09-14T05:09:19.043" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1972" PostTypeId="1" CreationDate="2015-09-14T06:25:24.737" Score="2" ViewCount="119" Body="&lt;p&gt;when opening a remote directory (FTP) on Pantheon-files, I get the following message (I opened Pantheon-file from the terminal to get error messages).&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gof-directory-async.vala:471: Listing directory error: La connexion est fermée &lt;a href=&quot;ftp://user@mywebsite.com/public/www&quot; rel=&quot;nofollow&quot;&gt;ftp://user@mywebsite.com/public/www&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;La connexion est fermée&lt;/em&gt; translates to &lt;em&gt;The connexion is closed&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All my FTP connexion don't work any more !&#xA;They used to work just a few days ago. I don't have a clue about what to do to fix that.&#xA;Any ideas ?&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2015-09-18T09:53:56.640" Title="Files - gof-directory-async.vala:471: Listing directory error:" Tags="|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1973" PostTypeId="2" ParentId="1917" CreationDate="2015-09-14T06:49:05.843" Score="1" Body="&lt;p&gt;Your script gave me the solution! you can add &lt;code&gt;-h string:x-canonical-private-synchronous:script&lt;/code&gt; to my notify-send command and it will work perfectly, thanks. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;just writing this here for anyone to see, you can send int:value notifications in elementary OS by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;notify-send &quot; &quot; -h string:synchronous:volume -h int:value:number -h string:x-canonical-private-synchronous:script&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2341" LastEditorUserId="34" LastEditDate="2015-09-20T14:44:12.900" LastActivityDate="2015-09-20T14:44:12.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1974" PostTypeId="2" ParentId="1962" CreationDate="2015-09-14T09:02:56.713" Score="-1" Body="&lt;p&gt;Rob,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm getting error after error, that's why I'll stick to Mint 17.2 on that HP notebook and I still have elementary OS on my prime computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW&#xA;Cinnamon Mint installation has one additional option:&#xA;- Install in Compatibility Mode.&#xA;This works.&lt;/p&gt;&#xA;" OwnerUserId="2379" LastEditorUserId="34" LastEditDate="2015-09-20T14:44:15.867" LastActivityDate="2015-09-20T14:44:15.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1976" PostTypeId="1" CreationDate="2015-09-14T12:17:31.270" Score="1" ViewCount="37" Body="&lt;p&gt;For some reason, I can't install Elementary OS, At the end of installing the OS, it comes up with an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Grub-pc failed to install to /target/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also to note, I have no internet connection for another odd reason. I'm currently connected with Ethernet on windows, but nothing on the Elementary installation.&lt;/p&gt;&#xA;" OwnerUserId="2390" LastEditorUserId="26" LastEditDate="2015-09-16T10:00:45.627" LastActivityDate="2015-09-16T10:00:45.627" Title="Can't install Elementary OS, Grub error" Tags="|uefi|grub|" AnswerCount="0" CommentCount="0" ClosedDate="2015-09-16T10:00:25.213" ContentLicense="CC BY-SA 3.0" />
  <row Id="1978" PostTypeId="1" AcceptedAnswerId="1989" CreationDate="2015-09-14T13:24:26.657" Score="5" ViewCount="539" Body="&lt;p&gt;I want to remove this package, because for some reason, elementary OS makes my router reboot. I am sure the cause is elementary OS, because it only happens when using elementary OS on any PC in the house, I can't explain why, but I can see this pattern for months.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the router reboots, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/361/odd-window-appears-when-i-lose-connection-unable-to-load-page&quot;&gt;this window&lt;/a&gt; appears, this is a home computer, so I don't need this feature.&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-20T14:45:26.280" Title="Can I safely remove capnet-assist package?" Tags="|capnet-assist|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1979" PostTypeId="1" CreationDate="2015-09-14T13:28:47.630" Score="0" ViewCount="74" Body="&lt;p&gt;I'm not totally sure if it is only elementary OS or all Linux distributions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I been seeing this for months but do not have a clue about the reason. When I use a computer with elementary, my router reboots, on something like 1 time per hour. I have two computers with elementary OS being used everyday, when I use OS X everything goes fine, until some computer with elementary gets powered on, then, the pattern begins.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there is some way I can diagnose this?&lt;/p&gt;&#xA;" OwnerUserId="38" LastEditorUserId="45" LastEditDate="2015-09-14T17:06:37.320" LastActivityDate="2015-09-14T17:06:37.320" Title="elementary OS makes my router reboot, why?" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1980" PostTypeId="2" ParentId="1948" CreationDate="2015-09-14T13:35:42.510" Score="2" Body="&lt;p&gt;Incompatibility between third-party apps and Wingpanel is something that elementary can do little about, as it is third-party devs' job to provide this kind of support. In fact, there has been a lot of talk about moving away from Ayatana indicators for future releases. (see &lt;a href=&quot;https://blueprints.launchpad.net/wingpanel/+spec/new-indicator-framework&quot; rel=&quot;nofollow&quot;&gt;this blueprint&lt;/a&gt; for example).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the Dropbox indicator, several workarounds have been provided. Search the questions here on StackExchange. What worked for me is &lt;a href=&quot;https://github.com/nathandyer/elementary-dropbox-mods&quot; rel=&quot;nofollow&quot;&gt;this script&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-14T13:35:42.510" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1982" PostTypeId="2" ParentId="1979" CreationDate="2015-09-14T14:44:00.787" Score="4" Body="&lt;p&gt;elementary OS does not have any management access to your router. If this is really caused by Linux (elementary OS uses the same network stack as every other distribution), it's your router's fault. You might want to contact your router supplier (which you did not specify yet).&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-09-14T14:44:00.787" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1984" PostTypeId="1" AcceptedAnswerId="1997" CreationDate="2015-09-14T18:36:05.607" Score="1" ViewCount="702" Body="&lt;p&gt;I have a new laptop, Lenovo U330. I installed elementary freya 0.3.1. But the backlight does not work in my keyboard. That was working fine in Windows 8.1 before I install elementary. Is there any way to activate that? If not I would open a new issue in Launchpad ;)&lt;/p&gt;&#xA;" OwnerUserId="191" LastEditorUserId="190" LastEditDate="2015-09-14T20:19:16.617" LastActivityDate="2015-09-15T03:27:01.303" Title="Keyboard backlight is not working on Lenovo U330" Tags="|keyboard|hardware|laptop|lenovo|backlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1985" PostTypeId="2" ParentId="18" CreationDate="2015-09-14T19:14:33.660" Score="16" Body="&lt;p&gt;This is an issue with Google Chrome that affects multiple OSes and has been &lt;a href=&quot;https://code.google.com/p/chromium/issues/detail?id=378881&quot; rel=&quot;noreferrer&quot;&gt;confirmed&lt;/a&gt; in Google's issue tracker. That said, you can work around it in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Workaround:&lt;/h1&gt;&#xA;&#xA;&lt;h3&gt;1. Copy the app launcher&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the &lt;strong&gt;Files&lt;/strong&gt; app, click in the top location bar, and type &lt;code&gt;/usr/share/applications/&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BQt8c.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BQt8c.png&quot; alt=&quot;Screenshot of Files at the right location&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Find the &lt;strong&gt;Google Chrome&lt;/strong&gt; launcher and copy it (secondary/right-click &gt; &lt;strong&gt;Copy&lt;/strong&gt;, or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;C&lt;/kbd&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Click in the top location bar and type &lt;code&gt;~/.local/share/applications&lt;/code&gt;, then paste (secondary/right-click &gt; &lt;strong&gt;Paste&lt;/strong&gt;, or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt;) the Chrome launcher.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h3&gt;2. Modify the new launcher&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Secondary/right-click the new &lt;strong&gt;Google Chrome&lt;/strong&gt; launcher in your &lt;code&gt;~/.local/share/applications&lt;/code&gt; folder and choose &lt;strong&gt;Open with&lt;/strong&gt; &gt; &lt;strong&gt;Other Application&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;strong&gt;Scratch&lt;/strong&gt; from the list, or if it's not there, choose &lt;strong&gt;View All Applications&lt;/strong&gt; and then choose &lt;strong&gt;Scratch&lt;/strong&gt; and click &lt;strong&gt;Select&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In the file that opens, find each line that begins with &lt;code&gt;Exec=&lt;/code&gt; and type &lt;code&gt;StartupWMClass=Google-chrome-stable&lt;/code&gt; on a new line below each instance.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XhU6q.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XhU6q.png&quot; alt=&quot;Screenshot of Scratch editing the launcher&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Close the file (it should save automatically unless you have changed Scratch's default settings).&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h3&gt;3. Re-add it to your dock&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Remove any existing Chrome launcher from your dock by secondary/right-clicking it and unchecking &lt;strong&gt;Keep in Dock&lt;/strong&gt;, or simply drag the icon off of the dock.&lt;/li&gt;&#xA;&lt;li&gt;Open the app launcher (&lt;strong&gt;Applications&lt;/strong&gt;) and drag the Chrome icon to your dock, or secondary/right-click it and select &lt;strong&gt;Add to Dock&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h1&gt;Caveats:&lt;/h1&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;This has been proven to work now, but could possibly break with a future update of Google Chrome.&lt;/li&gt;&#xA;&lt;li&gt;Ideally Google will fix the issue and push out an update, at which point the Google Chrome launcher at &lt;code&gt;~/.local/share/applications/&lt;/code&gt; could be deleted.&lt;/li&gt;&#xA;&lt;li&gt;You will continue to receive updates to Google Chrome, but will no longer receive updates to the Google Chrome launcher itself. This shouldn't be an issue, but means any new translations or features Google adds to the launcher won't show up for you unless you repeat these steps.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="308" LastEditorUserId="308" LastEditDate="2015-09-14T19:37:16.763" LastActivityDate="2015-09-14T19:37:16.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1986" PostTypeId="1" AcceptedAnswerId="2438" CreationDate="2015-09-14T19:18:56.340" Score="3" ViewCount="145" Body="&lt;p&gt;On starting OS and when I try to update and install stuff I get the error &lt;em&gt;boot partition low space&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been having lots of issues with freya so I'd like to get stuff running smoothly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Partition scheme I have&lt;/p&gt;&#xA;&#xA;&lt;p&gt;boot: around 300Mb&#xA;root: around 30/35Gb&#xA;Home: more than 100Gb&#xA;Swap: 10Gb (around 1.5 my RAM)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As advised in lots of guides&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot partition is full. Why are kernel files pilling up in the partition? Shouldn't they swap when upgrading? Will this always happen once in a while? What files to delete? PlayOnLinux added lots of crap on terminal when I tried to use another question solution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YjA39.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YjA39.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1170" LastActivityDate="2016-01-09T14:26:55.673" Title="Boot partition low space warnings - problems doing updates [tried another similar post but didn't work]" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1989" PostTypeId="2" ParentId="1978" CreationDate="2015-09-14T19:55:46.827" Score="4" Body="&lt;p&gt;Yes you can safely remove it. The purpose of the capnet-assist package is to:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Assists users in connective to Captive Portals such as those found on&#xA;  public access points in train stations, coffee shops, universities,&#xA;  etc.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Upon detection, the assistant appears showing the captive portal. Once&#xA;  a connection is known to have been established, it dismisses itself.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So removing it will only take away the ability to automatically display a  Captive Portal's login page when you connect to a wifi network (which is not really a must have).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you may still want to report a &lt;a href=&quot;https://bugs.launchpad.net/capnet-assist&quot; rel=&quot;nofollow&quot;&gt;bug&lt;/a&gt; so that developers can investigate the issues that you are seeing.&lt;/p&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-09-14T20:25:34.390" LastActivityDate="2015-09-14T20:25:34.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1990" PostTypeId="1" AcceptedAnswerId="2031" CreationDate="2015-09-14T20:07:50.343" Score="15" ViewCount="14835" Body="&lt;p&gt;When I tried to add my Gmail account, I was notified by Google with a message that follows:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sign-in attempt prevented   &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Hi,&#xA;  Someone just tried to sign in to your Google Account from an app that doesn't meet modern security standards.&#xA;  Details:&#xA;  We strongly recommend that you use a secure app, like Gmail, to access your account. All apps made by Google meet these security standards. Using a less secure app, on the other hand, could leave your account vulnerable. Learn more.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Google stopped this sign-in attempt, but you should review your recently used devices.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Basically, right now there is no way to use Geary as a mailbox for Gmail (and for other services it, apparently, doesn't provide enough security). It's not really a question, but I would love to have this issue fixed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are elementary devs going to do something about that? If yes, when the update will be available?&lt;/p&gt;&#xA;" OwnerUserId="2392" LastEditorUserId="45" LastEditDate="2016-12-28T18:33:01.960" LastActivityDate="2016-12-28T18:33:01.960" Title="Why Can't I Log In to Gmail with Geary or Mail?" Tags="|release-freya|pantheon-mail|security|" AnswerCount="3" CommentCount="4" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1991" PostTypeId="1" CreationDate="2015-09-14T20:49:53.437" Score="1" ViewCount="3972" Body="&lt;p&gt;I'm trying to install the Elementary OS on my Macbook... and...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;ubi-partman failed with exit code 141. Further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken. &quot;&lt;/p&gt;&#xA;" OwnerUserId="2394" LastActivityDate="2015-11-28T21:44:33.167" Title="Ubi-partman failed with exit code 141" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1992" PostTypeId="1" CreationDate="2015-09-14T21:06:14.460" Score="5" ViewCount="373" Body="&lt;p&gt;How do you lock down\restrict a standard user account (i.e. student)? I need to control what they have access to and prevent them from making any changes to their session. I installed 0.3 Freya (64-bit) on a Dell D820 laptop with 2 GB of Ram.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, I can't have them modify the desktop, dock, add or remove programs.&lt;/p&gt;&#xA;" OwnerUserId="2395" LastEditorUserId="45" LastEditDate="2015-09-15T22:49:06.737" LastActivityDate="2015-09-15T22:49:06.737" Title="How can I restrict a user's account?" Tags="|settings|system|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="1994" PostTypeId="1" AcceptedAnswerId="2019" CreationDate="2015-09-14T21:51:00.800" Score="0" ViewCount="1215" Body="&lt;p&gt;My headphones are currently recognized as an input device, how can I make them an output device? The speakers and the headphones microphone are recognized correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;I'm currently on a desktop pc. The devices are connected by 3 separate jacks. Two of them seem to work, except for the third one which is listed as a input device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uH31H.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uH31H.png&quot; alt=&quot;Screenshot of sound settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit2:&#xA;The blue jack is where I plug in my headphones. The pink one is used for microphone and the green one is used for speakers.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kS8Zn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kS8Zn.jpg&quot; alt=&quot;A picture of the three jacks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2391" LastEditorUserId="2391" LastEditDate="2015-09-16T09:22:15.630" LastActivityDate="2015-09-16T13:32:09.277" Title="Headphones are recognized as an input device" Tags="|settings|sound|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1995" PostTypeId="2" ParentId="1992" CreationDate="2015-09-14T22:22:04.957" Score="3" Body="&lt;p&gt;At the moment, elementary OS doesn't come with any parental controls. There is some work being done however &lt;a href=&quot;https://launchpad.net/switchboard-plug-parental-controls&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Disallow adding and removing programs&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default, non-administrative users cannot install or remove packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Lock the Desktop&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no desktop, so nothing to worry about there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Lock the Dock&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold &lt;kbd&gt;Control&lt;/kbd&gt; + Right-click the dock and select &quot;Preferences&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select the &quot;Behavior&quot; tab&lt;/li&gt;&#xA;&lt;li&gt;Toggle the switch next to &quot;Lock Icons&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-09-15T00:41:24.457" LastActivityDate="2015-09-15T00:41:24.457" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="1997" PostTypeId="2" ParentId="1984" CreationDate="2015-09-15T03:27:01.303" Score="1" Body="&lt;p&gt;Not sure about the U330, but it works fine on my Lenovo U31 running elementary OS 0.3.1 and prior to the 0.3.1 update. I think it is the F9 key that enables it on the U330. If you have Hotkey mode disabled in BIOS, you need to press Fn + F9 to turn on the backlight. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.lenovo.com/shop/americas/content/user_guides/u330p_u430p_ug_english.pdf&quot; rel=&quot;nofollow&quot;&gt;http://www.lenovo.com/shop/americas/content/user_guides/u330p_u430p_ug_english.pdf&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Note:If you changed the HotKey Mode from Enabled to Disabled&#xA; in the BIOS setup utility, you will need to press the Fn key in combination with the appropriate hotkey&quot;&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-09-15T03:27:01.303" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="1998" PostTypeId="1" AcceptedAnswerId="1999" CreationDate="2015-09-15T06:25:21.043" Score="6" ViewCount="361" Body="&lt;p&gt;Over the past few months as I've transitioned from Windows to Elementary OS, I've had several hardware issues (especially regarding my laptop's touchpad) that I've found solutions to. Many of these solutions involved dconf Editor, which seems like a visual registry editor… &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One problem I have discovered is that sometimes dconf's settings override those in System Settings, and sometimes they seem have no effect at all. I also worry about changing the wrong thing by mistake and breaking things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I'd like to know is, when is dconf Editor the right tool to change settings, and what should I be wary of?&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2015-09-15T10:44:02.657" Title="When should dconf Editor be used or not used?" Tags="|settings|system|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="1999" PostTypeId="2" ParentId="1998" CreationDate="2015-09-15T08:29:57.343" Score="6" Body="&lt;p&gt;What you should always keep in mind is the fact that if a developer does not add a visual setting to his application (or to the system settings), he has a reason for that. elementary OS tries to provide a good out-of-box experience with sane defaults. More settings visualized in your application means there is more stuff that can act unexpected or break the overall user experience provided.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, most apps in elementary OS contain those &quot;advanced settings&quot; available only via dconf-editor because sometimes, default just doesn't suit you. But it's some kind of &quot;last resort&quot;: If it's not available via setting panels, it's not well supported - It might work, but it could result in a suboptimal user experience. That's why it's &quot;hidden&quot; away - The developer does not think it's a great idea to use it. Sometimes, dconf keys are not &quot;user settings&quot; at all; They're used by applications to store user-specific values as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make it short, dconf should only be used if absolutely needed. Try to change things via setting panels or the system settings before and always be careful if you're using dconf - If you don't understand &lt;em&gt;what&lt;/em&gt; you're changing exactly, it might be not the best idea. Try to understand what you are about to do before you do it.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="75" LastEditDate="2015-09-15T10:44:02.657" LastActivityDate="2015-09-15T10:44:02.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2000" PostTypeId="1" AcceptedAnswerId="2004" CreationDate="2015-09-15T10:45:01.290" Score="2" ViewCount="621" Body="&lt;p&gt;Folders containing files can be dragged and pinned to the dock. The problem is there's no going back from there, that is you can't remove folders neither by dragging them off nor from a context menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found out it's &lt;a href=&quot;https://bugs.launchpad.net/plank/+bug/1010066&quot; rel=&quot;nofollow&quot;&gt;a bug&lt;/a&gt; (and a quite long-standing one from the look of it). But my problem now is finding a way/workaround to remove a folder I no longer need. I guess some config files may be modified.&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-09-15T16:34:23.690" LastActivityDate="2017-11-18T14:02:14.063" Title="How can I remove a folder from the dock?" Tags="|folder|plank|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2001" PostTypeId="1" CreationDate="2015-09-15T11:24:56.393" Score="3" ViewCount="1462" Body="&lt;p&gt;I need the icon to minimize windows and show desktop. I can't find a decent guide. Can you help me? &lt;/p&gt;&#xA;" OwnerUserId="2400" LastEditorUserId="55" LastEditDate="2015-09-15T19:40:13.660" LastActivityDate="2018-10-28T16:54:23.267" Title="Add icon to show desktop" Tags="|icons|show-desktop|minimize|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2003" PostTypeId="2" ParentId="2001" CreationDate="2015-09-15T15:16:20.580" Score="-1" Body="&lt;p&gt;I believe you are asking how to minimize active windows in elementary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of now, there isnt a dedicated minimize button on application windows in elementary. You can, however, minimize active windows to plank (the dock) by clicking said application's icon in the dock.&lt;/p&gt;&#xA;" OwnerUserId="2401" LastActivityDate="2015-09-15T15:16:20.580" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2004" PostTypeId="2" ParentId="2000" CreationDate="2015-09-15T16:35:32.113" Score="3" Body="&lt;p&gt;Upon further investigation, I found that the context menu can actually be accessed and from there you can untick &quot;Keep in dock&quot;. What fooled me was that I had pinned to the dock a folder containing a great number of files and in order to access the context menu you have to scroll down like forever (or hit the 'End' key). This is not a desirable behavior either. Once you are at the bottom of the list you can drag the folder off, too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FoPxd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FoPxd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rLfwd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rLfwd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-09-16T12:13:30.410" LastActivityDate="2015-09-16T12:13:30.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2005" PostTypeId="1" CreationDate="2015-09-15T16:35:59.687" Score="0" ViewCount="1023" Body="&lt;p&gt;I love the elementary default theme so I do not want to change it. Therefore, the Elementary tweaks is worthless for what I am looking forward to do... I wanted to change some specific icons and I discovered on my own how to replace some of them. I opened Files manager as an Admnistrator, went to /usr/share/applications/, opened the app file with Scratch and changed the icon location.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fair enough. But I wanted to go further.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was then able to change the Telegram icon in the Wingpanel : we have to go in home/user/.TelegramDesktop/tdata/ticons/.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And now I want to change the last few things in the default theme. First, I would like to change the wifi and battery icons. But I don't quite know where the wingpanels icons are. I would say they are around here : /usr/share/icons/elementary/panel/. But this is where my guesses end. Worse is yet to replace them correctly...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, I wanted to put the windows controls (that is, close-minimize-maximize) as in the Fluch theme : &lt;a href=&quot;https://lh5.googleusercontent.com/-B-Irmuz7Vq4/VW8WpS8AuPI/AAAAAAAAAhM/ABKurNrfbCI/w1038-h584-no/Bildschirmfoto%2Bvom%2B2015-06-03%2B16%253A48%253A05.png&quot; rel=&quot;nofollow&quot;&gt;https://lh5.googleusercontent.com/-B-Irmuz7Vq4/VW8WpS8AuPI/AAAAAAAAAhM/ABKurNrfbCI/w1038-h584-no/Bildschirmfoto%2Bvom%2B2015-06-03%2B16%253A48%253A05.png&lt;/a&gt; (from this theme : &lt;a href=&quot;https://github.com/Keilbritschn/elementaryOS-Fluch-theme/&quot; rel=&quot;nofollow&quot;&gt;https://github.com/Keilbritschn/elementaryOS-Fluch-theme/&lt;/a&gt;)&#xA;Turns out that I was successful. Well... sort of... I went here /usr/share/themes/elementary/gtk-3.0/, added the icons of the &quot;windows control&quot; folder of the Fluch theme, and replaced the apps.css file. The windows controls were changed but 1) only in the Files manager in Admnistrator mode and 2) the whole system became unstable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="2402" LastEditorUserId="2402" LastEditDate="2015-09-15T16:41:07.853" LastActivityDate="2016-03-22T12:45:25.377" Title="Changing specific icons" Tags="|wingpanel|themes|window-decoration|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2006" PostTypeId="1" CreationDate="2015-09-15T16:43:35.997" Score="1" ViewCount="107" Body="&lt;p&gt;I need a help, because I'm newbie in Linux and I'm trying to configure the  keyboard for this Dell mini, but some keys don't work, such as: |, Alt Gr, [, ]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank's a lot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/76tBt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/76tBt.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2404" LastActivityDate="2015-09-16T13:41:17.393" Title="Problems with BR keyboard in dell mini" Tags="|keyboard|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2007" PostTypeId="2" ParentId="1263" CreationDate="2015-09-15T17:32:30.843" Score="5" Body="&lt;p&gt;This is how I fixed it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal, run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/themes/elementary/gtk-3.0/apps.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This brings up an editor. Under the &lt;code&gt;Gala&lt;/code&gt; section, add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.gala-notification GtkLabel {&#xA;    color: #fff;&#xA; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save, log out and back in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info in &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-pantheon-shell/+bug/1459530&quot; rel=&quot;nofollow&quot;&gt;Switchboard Desktop Plug bug #1459530&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2387" LastEditorUserId="190" LastEditDate="2015-09-30T11:43:59.023" LastActivityDate="2015-09-30T11:43:59.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2008" PostTypeId="2" ParentId="1895" CreationDate="2015-09-15T17:43:21.070" Score="2" Body="&lt;p&gt;Well If you do want to copy and/or paste the name of files and folders heres the way: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Right click on the folder and select properties&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EdqKf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EdqKf.png&quot; alt=&quot;the props&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Here you will find at the top the name, all shortcuts work, eg &lt;code&gt;ctrl+c&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NmVDI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NmVDI.png&quot; alt=&quot;props&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Right click on the name and other options appear&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1exzs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1exzs.png&quot; alt=&quot;prop pro&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="179" LastActivityDate="2015-09-15T17:43:21.070" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2009" PostTypeId="2" ParentId="2006" CreationDate="2015-09-15T17:58:59.367" Score="1" Body="&lt;p&gt;You need to change your keyboard layout to &lt;strong&gt;Portuguese (Brazil, eliminate dead keys)&lt;/strong&gt;. Follow these steps to change the default layout:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;em&gt;System Settings&lt;/em&gt; from the &lt;em&gt;Applications&lt;/em&gt; menu.&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;em&gt;Keyboard&lt;/em&gt; under the &lt;em&gt;Hardware&lt;/em&gt; section.&lt;/li&gt;&#xA;&lt;li&gt;Click the &lt;em&gt;Layout&lt;/em&gt; button.&lt;/li&gt;&#xA;&lt;li&gt;On the left side list box you will see a &lt;kbd&gt;+&lt;/kbd&gt; button, click it.&lt;/li&gt;&#xA;&lt;li&gt;From the &lt;em&gt;Language&lt;/em&gt; drop-down box, select &lt;strong&gt;Portuguese (Brazil)&lt;/strong&gt;. From the &lt;em&gt;Layout&lt;/em&gt; drop-down box, select &lt;strong&gt;Portuguese (Brazil, eliminate dead keys)&lt;/strong&gt;. Click &lt;strong&gt;Add Layout&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Highlight &lt;strong&gt;Portuguese (Brazil, eliminate dead keys)&lt;/strong&gt; from the list box.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This should result in the proper keyboard layout.&lt;/p&gt;&#xA;" OwnerUserId="383" LastEditorUserId="383" LastEditDate="2015-09-16T13:41:17.393" LastActivityDate="2015-09-16T13:41:17.393" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2010" PostTypeId="1" CreationDate="2015-09-15T19:47:44.907" Score="2" ViewCount="175" Body="&lt;p&gt;It seems that a new X session is created when I login from the welcome screen. Whenever I log out and in from my session - my monitors go &quot;black&quot; - most likely from changing tty.&lt;/p&gt;&#xA;" OwnerUserId="2356" LastEditorUserId="2356" LastEditDate="2015-11-09T21:56:34.187" LastActivityDate="2015-11-09T21:56:34.187" Title="Welcome screen and logging in" Tags="|release-freya|" AnswerCount="0" CommentCount="4" ClosedDate="2015-11-18T11:41:34.653" ContentLicense="CC BY-SA 3.0" />
  <row Id="2011" PostTypeId="2" ParentId="1937" CreationDate="2015-09-15T20:28:39.497" Score="1" Body="&lt;p&gt;I also had this problem ('grub-efi' package failed to install into /target/) and I fixed according to &lt;a href=&quot;https://askubuntu.com/questions/260297/12-04-2-failed-to-install-grub-efi-to-target&quot;&gt;this askbuntu post&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, what you have to do is use the option to &quot;connect to Internet&quot; during the Install process.  It is not necessary to choose &quot;download updates during install&quot;, just connect to Internet is enough.&lt;/p&gt;&#xA;" OwnerUserId="2405" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-15T20:28:39.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2012" PostTypeId="1" AcceptedAnswerId="2487" CreationDate="2015-09-15T23:29:54.177" Score="2" ViewCount="734" Body="&lt;p&gt;I've installed &lt;code&gt;lm-sensors&lt;/code&gt;.  I ran &lt;code&gt;sensors-detect&lt;/code&gt; and said yes to each question.  Here is the result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)&#xA;# Board: Gigabyte Technology Co., Ltd. F2A88XM-D3H&#xA;&#xA;This program will help you determine which kernel modules you need&#xA;to load to use lm_sensors most effectively. It is generally safe&#xA;and recommended to accept the default answers to all questions,&#xA;unless you know what you're doing.&#xA;&#xA;Some south bridges, CPUs or memory controllers contain embedded sensors.&#xA;Do you want to scan for them? This is totally safe. (YES/no): yes&#xA;Module cpuid loaded successfully.&#xA;Silicon Integrated Systems SIS5595...                       No&#xA;VIA VT82C686 Integrated Sensors...                          No&#xA;VIA VT8231 Integrated Sensors...                            No&#xA;AMD K8 thermal sensors...                                   No&#xA;AMD Family 10h thermal sensors...                           No&#xA;AMD Family 11h thermal sensors...                           No&#xA;AMD Family 12h and 14h thermal sensors...                   No&#xA;AMD Family 15h thermal sensors...                           No&#xA;AMD Family 15h power sensors...                             No&#xA;AMD Family 16h power sensors...                             No&#xA;Intel digital thermal sensor...                             No&#xA;Intel AMB FB-DIMM thermal sensor...                         No&#xA;VIA C7 thermal sensor...                                    No&#xA;VIA Nano thermal sensor...                                  No&#xA;&#xA;Some Super I/O chips contain embedded sensors. We have to write to&#xA;standard I/O ports to probe them. This is usually safe.&#xA;Do you want to scan for Super I/O sensors? (YES/no): yes&#xA;Probing for Super-I/O at 0x2e/0x2f&#xA;Trying family `National Semiconductor/ITE'...               No&#xA;Trying family `SMSC'...                                     No&#xA;Trying family `VIA/Winbond/Nuvoton/Fintek'...               No&#xA;Trying family `ITE'...                                      Yes&#xA;Found unknown chip with ID 0x8620&#xA;Probing for Super-I/O at 0x4e/0x4f&#xA;Trying family `National Semiconductor/ITE'...               No&#xA;Trying family `SMSC'...                                     No&#xA;Trying family `VIA/Winbond/Nuvoton/Fintek'...               No&#xA;Trying family `ITE'...                                      No&#xA;&#xA;Some systems (mainly servers) implement IPMI, a set of common interfaces&#xA;through which system health data may be retrieved, amongst other things.&#xA;We first try to get the information from SMBIOS. If we don't find it&#xA;there, we have to read from arbitrary I/O ports to probe for such&#xA;interfaces. This is normally safe. Do you want to scan for IPMI&#xA;interfaces? (YES/no): yes&#xA;Probing for `IPMI BMC KCS' at 0xca0...                      No&#xA;Probing for `IPMI BMC SMIC' at 0xca8...                     No&#xA;&#xA;Some hardware monitoring chips are accessible through the ISA I/O ports.&#xA;We have to write to arbitrary I/O ports to probe them. This is usually&#xA;safe though. Yes, you do have ISA I/O ports even if you do not have any&#xA;ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes&#xA;Probing for `National Semiconductor LM78' at 0x290...       No&#xA;Probing for `National Semiconductor LM79' at 0x290...       No&#xA;Probing for `Winbond W83781D' at 0x290...                   No&#xA;Probing for `Winbond W83782D' at 0x290...                   No&#xA;&#xA;Lastly, we can probe the I2C/SMBus adapters for connected hardware&#xA;monitoring devices. This is the most risky part, and while it works&#xA;reasonably well on most systems, it has been reported to cause trouble&#xA;on some systems.&#xA;Do you want to probe the I2C/SMBus adapters now? (YES/no): yes&#xA;Using driver `i2c-piix4' for device 0000:00:14.0: AMD Hudson-2 SMBus&#xA;Module i2c-dev loaded successfully.&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x90 (i2c-0)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x91 (i2c-1)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x92 (i2c-2)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x93 (i2c-3)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x94 (i2c-4)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x95 (i2c-5)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;Client found at address 0x4a&#xA;Probing for `National Semiconductor LM75'...                No&#xA;Probing for `National Semiconductor LM75A'...               No&#xA;Probing for `Dallas Semiconductor DS75'...                  No&#xA;Probing for `National Semiconductor LM77'...                No&#xA;Probing for `Analog Devices ADT7410/ADT7420'...             No&#xA;Probing for `Analog Devices ADT7411'...                     No&#xA;Probing for `Maxim MAX6642'...                              No&#xA;Probing for `National Semiconductor LM73'...                No&#xA;Probing for `National Semiconductor LM92'...                No&#xA;Probing for `National Semiconductor LM76'...                No&#xA;Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No&#xA;Probing for `NXP/Philips SA56004'...                        No&#xA;Client found at address 0x4b&#xA;Probing for `National Semiconductor LM75'...                No&#xA;Probing for `National Semiconductor LM75A'...               No&#xA;Probing for `Dallas Semiconductor DS75'...                  No&#xA;Probing for `National Semiconductor LM77'...                No&#xA;Probing for `Analog Devices ADT7410/ADT7420'...             No&#xA;Probing for `Analog Devices ADT7411'...                     No&#xA;Probing for `Maxim MAX6642'...                              No&#xA;Probing for `National Semiconductor LM92'...                No&#xA;Probing for `National Semiconductor LM76'...                No&#xA;Probing for `Maxim MAX6633/MAX6634/MAX6635'...              No&#xA;Probing for `NXP/Philips SA56004'...                        No&#xA;Probing for `Analog Devices ADT7481'...                     No&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x96 (i2c-6)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: Radeon i2c bit bus 0x97 (i2c-7)&#xA;Do you want to scan it? (yes/NO/selectively): yes&#xA;&#xA;Next adapter: card0-DP-1 (i2c-8)&#xA;Do you want to scan it? (YES/no/selectively): yes&#xA;&#xA;Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-9)&#xA;Do you want to scan it? (YES/no/selectively): yes&#xA;Client found at address 0x52&#xA;Probing for `Analog Devices ADM1033'...                     No&#xA;Probing for `Analog Devices ADM1034'...                     No&#xA;Probing for `SPD EEPROM'...                                 Yes&#xA;    (confidence 8, not a hardware monitoring chip)&#xA;Client found at address 0x53&#xA;Probing for `Analog Devices ADM1033'...                     No&#xA;Probing for `Analog Devices ADM1034'...                     No&#xA;Probing for `SPD EEPROM'...                                 Yes&#xA;    (confidence 8, not a hardware monitoring chip)&#xA;&#xA;Next adapter: SMBus PIIX4 adapter at 0b20 (i2c-10)&#xA;Do you want to scan it? (YES/no/selectively): yes&#xA;&#xA;Sorry, no sensors were detected.&#xA;Either your system has no sensors, or they are not supported, or&#xA;they are connected to an I2C or SMBus adapter that is not&#xA;supported. If you find out what chips are on your board, check&#xA;http://www.lm-sensors.org/wiki/Devices for driver status.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I then ran &lt;code&gt;sensors&lt;/code&gt; command.  Here is the result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;radeon-pci-0100&#xA;Adapter: PCI adapter&#xA;temp1:        +43.0°C  (crit = +120.0°C, hyst = +90.0°C)&#xA;&#xA;k10temp-pci-00c3&#xA;Adapter: PCI adapter&#xA;temp1:        +14.0°C  (high = +70.0°C)&#xA;                       (crit = +80.0°C, hyst = +79.0°C)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am not sure if any of this is correct, and do not know for sure what my temperature of my CPU is.  I am running a AMD x4 860k CPU overclocked to 4.1 GHz with boost disabled and stock voltage of 1.356 VCORE.  Ram is 2133 (profile_1 enabled) Corsair Vengeance Pro 2x4GB.  GPU is Sapphire R9 270. Board is Gigabyte F2A88x-d3h.  I am also using a Coolermaster Hyper Evo 212 on the CPU with a 92mm and 140mm intake fans on the front of the case as well as 92mm and 140mm exhaust fans on back and top of case. OS: elementary OS Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system seems to be running fine, but I really want to be able to check my CPU temp.  Any advice?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2016-10-14T13:51:48.710" Title="Help determining CPU temperature?" Tags="|temperature|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2013" PostTypeId="2" ParentId="658" CreationDate="2015-09-16T06:04:56.990" Score="5" Body="&lt;p&gt;TrueType fonts can be installed from file manager - double click the .ttf file, font manager will open, click &quot;install&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install multiple fonts system wide:&#xA;ttf files:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo cp ./yourpath/*.ttf /usr/share/fonts/truetype/  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;opentype:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp ./yourpath/*.otf /usr/share/fonts/opentype/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo fc-cache -fv&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2406" LastActivityDate="2015-09-16T06:04:56.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2014" PostTypeId="2" ParentId="2001" CreationDate="2015-09-16T10:31:37.263" Score="2" Body="&lt;p&gt;The first step, install &lt;code&gt;wmctrl&lt;/code&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Description from the &lt;a href=&quot;http://tripie.sweb.cz/utils/wmctrl/&quot; rel=&quot;nofollow noreferrer&quot;&gt;wmctrl homepage&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The wmctrl program is a UNIX/Linux command line tool to interact with&#xA;  an EWMH/NetWM compatible X Window Manager. The tool provides command&#xA;  line access to almost all the features defined in the EWMH&#xA;  specification. It can be used, for example, to obtain information&#xA;  about the window manager, to get a detailed list of desktops and&#xA;  managed windows, to switch and resize desktops, to make windows&#xA;  full-screen, always-above or sticky, and to activate, close, move,&#xA;  resize, maximize and minimize them. The command line access to these&#xA;  window management functions makes it easy to automate and execute them&#xA;  from any application that is able to run a command in response to an&#xA;  event.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Next step, download and install script, &lt;a href=&quot;https://github.com/png2378/showdesktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;prepared by me&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp &amp;amp;&amp;amp; wget https://github.com/png2378/showdesktop/archive/master.zip&#xA;unzip master.zip &amp;amp;&amp;amp; cd showdesktop-master&#xA;sudo mv showdesktop /usr/local/bin/ &amp;amp;&amp;amp; sudo mv showdesktop.desktop /usr/share/applications/ &amp;amp;&amp;amp; sudo mv showdesktop.svg /usr/share/icons/elementary/apps/48/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The finish step, add icon on Plank:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv showdesktop.dockitem ~/.config/plank/dock1/launchers/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Result:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cwhXi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cwhXi.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-09-16T10:31:37.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2016" PostTypeId="2" ParentId="1717" CreationDate="2015-09-16T12:29:34.727" Score="0" Body="&lt;p&gt;If I remember correctly this was a design decision of the GTK+ project.  You shouldn't see the menu icons in elementary OS nor in any other desktop environment that uses it (like GNOME).&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-09-16T12:29:34.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2017" PostTypeId="2" ParentId="1994" CreationDate="2015-09-16T12:55:51.750" Score="0" Body="&lt;p&gt;Your headphones &quot;are not working&quot; because you are plugging them into the wrong jack. The correct jack for them is indeed the green one, as you have confirmed, too. The blue one, on the contrary, is a Stereo Line-in, that is why it is recognized as such. &lt;a href=&quot;http://www.hobby-hour.com/electronics/sound-card-color-code.php&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is a simple explanation of standard audio jacks on a soundcard. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to keep your speakers plugged into the green output, you have to find an alternative output. Don't you have any others maybe on the front side?&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-16T12:55:51.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2018" PostTypeId="1" CreationDate="2015-09-16T12:58:06.807" Score="3" ViewCount="560" Body="&lt;p&gt;I recently installed elementary os freya 0.3.1 . At first , when I tried it from usb , the os ran smoothly considering it wasnt a native install. However, after I installed it ,it lagged pretty bad! Files took forever to load and close and graphics were really choppy. Plus, the fan wouldnt slow down and made noise the whole time. I tried installing the nvidia drivers from the Additional drivers tab but nothing changed . I have a compaq presario cq61 which seems totally compatible ,and every other distro I have tried runs pretty smoothly.Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="2410" LastActivityDate="2016-03-07T03:29:42.277" Title="Elementary runs smoothly from usb but lags after installation" Tags="|release-freya|system-installation|graphic-drivers|hardware|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2019" PostTypeId="2" ParentId="1994" CreationDate="2015-09-16T13:09:55.963" Score="5" Body="&lt;p&gt;Your headphones are being recognized as an input device, because, according to the official &lt;a href=&quot;https://en.wikipedia.org/wiki/PC_System_Design_Guide#Color-coding_scheme_for_connectors_and_ports&quot; rel=&quot;noreferrer&quot;&gt;PC system design guide color-coding sheme for connectors and ports&lt;/a&gt;, you are plugging them into a line-in jack. So, everything works as expected :) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, it is possible to retask the jacks of your sound device with &lt;code&gt;HDAjackretask&lt;/code&gt;, which is part of the package &lt;code&gt;alsa-tools-gui&lt;/code&gt; in the official repositories.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ivgq8.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ivgq8.png&quot; alt=&quot;HDAjackretask&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HDAjackretask is an experimental application, it may not work, but it's worth a try.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-09-16T13:32:09.277" LastActivityDate="2015-09-16T13:32:09.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2020" PostTypeId="1" CreationDate="2015-09-16T13:44:06.637" Score="6" ViewCount="657" Body="&lt;p&gt;The battery icon doesn't change with the time. I never know when my battery is near to finish. Even if I plug in the energy, the icon doesn't change.&lt;/p&gt;&#xA;" OwnerUserId="963" LastActivityDate="2015-09-16T13:44:06.637" Title="How can I fix the battery icon?" Tags="|battery|" AnswerCount="0" CommentCount="4" ClosedDate="2015-09-24T21:08:16.117" ContentLicense="CC BY-SA 3.0" />
  <row Id="2021" PostTypeId="1" CreationDate="2015-09-16T17:06:18.783" Score="2" ViewCount="63" Body="&lt;p&gt;In Freya there is no way to specify an action for &lt;em&gt;What to do when the laptop lid is closed&lt;/em&gt; (eg &lt;em&gt;do nothing&lt;/em&gt;, &lt;em&gt;hibernate&lt;/em&gt;, &lt;em&gt;turn off&lt;/em&gt; etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately when I close my laptop, that is connected to my HDTV via HDMI, the PC just suspends.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to set this behaviour?&lt;/p&gt;&#xA;" OwnerUserId="2412" LastEditorUserId="137" LastEditDate="2015-09-17T03:38:11.627" LastActivityDate="2015-09-17T03:38:11.627" Title="Power management : &quot;do nothing&quot; when laptop is closed" Tags="|release-freya|power|" AnswerCount="0" CommentCount="0" ClosedDate="2015-10-02T06:53:38.787" ContentLicense="CC BY-SA 3.0" />
  <row Id="2022" PostTypeId="1" CreationDate="2015-09-16T17:06:53.377" Score="1" ViewCount="817" Body="&lt;p&gt;I  am trying to deactivate Auto-login on the system settings/user accounts, but it even after I reboot the computer it will still log in automatically. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1BZlJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1BZlJ.png&quot; alt=&quot;cat /etc/lightdm/lightdm.conf&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1110" LastEditorUserId="1110" LastEditDate="2015-09-17T13:38:09.423" LastActivityDate="2022-09-29T21:36:35.373" Title="Cant Deactivate Auto-Login" Tags="|greeter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2023" PostTypeId="1" CreationDate="2015-09-16T18:18:00.863" Score="2" ViewCount="657" Body="&lt;p&gt;I am new in linux environment. And after doing some research, I found elementary is the best user friendly OS we have. I installed the 32-bit version of it, and now I am trying to install VLC using &lt;code&gt;sudo apt-get install vlc&lt;/code&gt;. I am unable to install it and receive the below error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; vlc : Depends: vlc-nox (= 3.0.0~~git20150319+r59816+33~ubuntu14.04.1) but it is not going to be installed&#xA;       Depends: libavcodec55 (&amp;gt;= 6:9.1-1) but it is not installable or&#xA;                libavcodec-extra-55 (&amp;gt;= 6:10~~git20131218.b3189af~ubuntu14.04.1) but it is not installable&#xA;       Depends: libavutil53 (&amp;gt;= 6:9.1-1) but it is not installable&#xA;       Depends: libfreerdp1 (&amp;gt;= 1.0.1) but it is not installable&#xA;       Depends: libqtgui4 (&amp;gt;= 4:4.8.0) but it is not going to be installed&#xA;       Depends: libsdl-image1.2 (&amp;gt;= 1.2.10) but it is not installable&#xA;       Depends: libvlccore8 but it is not going to be installed&#xA;       Depends: libvncclient0 (&amp;gt;= 0.9.9) but it is not going to be installed&#xA;       Depends: libxcb-composite0 but it is not installable&#xA;       Depends: libxcb-keysyms1 (&amp;gt;= 0.3.9) but it is not installable&#xA;       Depends: libxcb-randr0 (&amp;gt;= 1.1) but it is not installable&#xA;       Depends: libxcb-xv0 (&amp;gt;= 1.2) but it is not installable&#xA;       Recommends: vlc-plugin-notify (= 3.0.0~~git20150319+r59816+33~ubuntu14.04.1) but it is not going to be installed&#xA;       Recommends: vlc-plugin-samba (= 3.0.0~~git20150319+r59816+33~ubuntu14.04.1) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried searching in net, I tried executing sudo apt-get update/upgrade. added vlc repository. But still I am getting this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know how can I fix this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2414" LastEditorUserId="160" LastEditDate="2015-10-16T14:07:18.107" LastActivityDate="2015-10-16T14:07:18.107" Title="Not able to install VLC" Tags="|release-freya|vlc|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2025" PostTypeId="1" CreationDate="2015-09-16T22:56:55.183" Score="2" ViewCount="401" Body="&lt;p&gt;I created a custom shortcut to a libreoffice calc spreadsheet to track my Ingress statistics. However, if I click the icon to open the spreadsheet, the libreoffice calc icon is highlighted instead of my custom shortcut. While I understand why this happens and this behaviour makes sense, I would like to have the custom shortcut highlighted in plank. Is this possible, and if so, how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my custom shortcut:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Ingress Stats&#xA;Comment=ingress statistics&#xA;Exec=libreoffice --calc --nologo /home/bene/Dokumente/Ingress\ Stats.ods&#xA;Icon=/home/bene/Bilder/Icons/ingressbwi.png&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Game;&#xA;Actions=Ingif;&#xA;&#xA;[Desktop Action Ingif]&#xA;Name=Create Ingress Gif&#xA;Exec=/home/bene/bin/./ingif&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ruCnn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ruCnn.png&quot; alt=&quot;customhighlight&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="474" LastActivityDate="2015-09-30T21:11:09.677" Title="Highlight custom plank icon" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2026" PostTypeId="2" ParentId="2025" CreationDate="2015-09-17T03:15:15.043" Score="1" Body="&lt;p&gt;Make a symlink to libreoffice and reference that in your .desktop file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make a symlink to libreoffice with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/lib/libreoffice/program/soffice.bin /usr/bin/ingressbwi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In your .desktop file change the Exec line to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/usr/bin/ingressbwi --calc --nologo /home/bene/Dokumente/Ingress\ Stats.ods&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2416" LastEditorUserId="2416" LastEditDate="2015-09-17T16:44:54.107" LastActivityDate="2015-09-17T16:44:54.107" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2027" PostTypeId="2" ParentId="1990" CreationDate="2015-09-17T06:24:16.107" Score="9" Body="&lt;p&gt;&quot;Doesn't meet modern security standards&quot; is Google code talk for not an in-house developed application.  By default, Google locks out most third party clients from IMAP access, but you can change that here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot;&gt;https://www.google.com/settings/security/lesssecureapps&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2417" LastActivityDate="2015-09-17T06:24:16.107" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2029" PostTypeId="2" ParentId="1142" CreationDate="2015-09-17T09:07:46.927" Score="-3" Body="&lt;p&gt;I had the same problem when you get boot screen press &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; then&lt;/li&gt;&#xA;&lt;li&gt;uninstall fglrx &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;and if it gives error then force it by typing &lt;code&gt;-force&lt;/code&gt;. It will solve your problem.&lt;/p&gt;&#xA;" OwnerUserId="2419" LastEditorUserId="22" LastEditDate="2015-09-20T06:06:10.167" LastActivityDate="2015-09-20T06:06:10.167" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2031" PostTypeId="2" ParentId="1990" CreationDate="2015-09-17T09:59:09.080" Score="15" Body="&lt;p&gt;The security standard Google is talking about is called &lt;a href=&quot;https://en.wikipedia.org/wiki/OAuth&quot; rel=&quot;noreferrer&quot;&gt;OAuth&lt;/a&gt;. It's a modern technology to authenticate a user. As the Wikipedia article states:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Google supports OAuth 2.0 as the recommended authentication mechanism for all of its APIs.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Geary is using IMAP/POP3 authentication, not OAuth. That's the problem. elementary OS actually supports OAuth authentication via the &lt;a href=&quot;https://launchpad.net/switchboard-plug-onlineaccounts&quot; rel=&quot;noreferrer&quot;&gt;online accounts&lt;/a&gt; functionality which could be used by any application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, Geary does not support using online accounts yet. After all, Geary is a third-party application &lt;a href=&quot;https://wiki.gnome.org/Apps/Geary&quot; rel=&quot;noreferrer&quot;&gt;not developed by the elementary OS team&lt;/a&gt;. [Edit: Since this answer was posted, the elementary team forked Geary as Pantheon Mail in &lt;a href=&quot;http://blog.elementary.io/post/139731273161/re-geary&quot; rel=&quot;noreferrer&quot;&gt;early 2016&lt;/a&gt;.] Of course the team would like to implement the functionality themselves, but the development resources (time, developers, money) are limited.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While Google claims IMAP and POP3 to be insecure, in reality it's not. Well, maybe the NSA knows how to break IMAP and POP3 authentication, but in general &lt;strong&gt;it is safe&lt;/strong&gt; as it uses &lt;a href=&quot;https://en.wikipedia.org/wiki/Transport_Layer_Security&quot; rel=&quot;noreferrer&quot;&gt;TLS aka SSL&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="5565" LastEditDate="2016-10-08T02:19:04.153" LastActivityDate="2016-10-08T02:19:04.153" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2032" PostTypeId="2" ParentId="2023" CreationDate="2015-09-17T11:43:48.180" Score="2" Body="&lt;p&gt;Try removing vlc with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge vlc*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that you will need to remove ppa that you have added:&#xA;Install ppa-purge:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You need to know what ppa you have added I pressume it's ppa:videolan/stable-daily but you need to check the exact ppa in the bash history:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;scratch-text-editor .bash_history&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When you find ppa use following commands (if you added different ppa just replace  ppa:videolan/stable-daily  with your ppa).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ppa-purge ppa:videolan/stable-daily  &#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reinstall VLC:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should help, if not read this &lt;a href=&quot;https://stackoverflow.com/questions/26957117/unmet-dependency-when-installing-vlc-on-ubuntu-14-04&quot;&gt;post&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2421" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2015-09-17T11:43:48.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2033" PostTypeId="1" CreationDate="2015-09-17T14:01:42.957" Score="1" ViewCount="146" Body="&lt;p&gt;I would like to change Geary orthography dictionary to Spanish. How can I?&lt;/p&gt;&#xA;" OwnerUserId="2423" LastEditorUserId="5565" LastEditDate="2016-10-17T20:46:38.667" LastActivityDate="2016-10-17T20:46:38.667" Title="Change Mail/Geary language orthography dictionary (spell check)" Tags="|pantheon-mail|settings|language|internationalization|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-21T20:10:01.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="2034" PostTypeId="1" CreationDate="2015-09-17T17:42:33.707" Score="1" ViewCount="38" Body="&lt;p&gt;Hello I have the following error when I turn on my computer.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mountall: error while loading shared libraries: libudev.so.0 : cannot open shared object file: Error 40'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As I think I've read on the internet this can be solved by doing this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -o remount, rw /&#xA;&#xA;ln -s /lib/x86_64-linux-gnu/libudev.so.1 /lib/x86_64-linux-gnu/libudev.so.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I do that the systems says&#xA;    Too many levels of symbolic links&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has a solution to this that doesn't involve reinstalling elementary OS? I don't want to lose all the data that I have on my &lt;code&gt;/home&lt;/code&gt; folder&lt;/p&gt;&#xA;" OwnerUserId="2426" LastEditorUserId="3757" LastEditDate="2016-04-25T07:36:04.440" LastActivityDate="2016-04-25T07:36:04.440" Title="Laptop doesn't start because libudevso.0" Tags="|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2035" PostTypeId="2" ParentId="17" CreationDate="2015-09-17T18:34:03.627" Score="1" Body="&lt;p&gt;Adding a PPA made for Ubuntu 14.04 by itself won't bork your install, but suppose you install some applications which need to install some dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These dependencies may be unable to be installed without uninstalling some packages essential to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Ubuntu) Software Center doesn't help with this, as it usually doesn't explicitly tell you what gets installed and removed.  I would recommend installing Synaptic Package Manager if you plan on installing from 3rd party PPAs as it will tell you exactly what happens on a package installation. (or you could use apt-get...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A good rule of thumb is to look &lt;strong&gt;very&lt;/strong&gt; carefully at what an installation does before installing, and if it wants to remove packages then don't install it.  Look up what the packages are first and make sure they aren't elementary OS system components.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most PPAs made for Ubuntu won't bork your install (many won't even ask to remove packages), but it only takes one... &lt;/p&gt;&#xA;" OwnerUserId="2417" LastActivityDate="2015-09-17T18:34:03.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2036" PostTypeId="1" AcceptedAnswerId="2037" CreationDate="2015-09-17T18:35:23.720" Score="2" ViewCount="2378" Body="&lt;p&gt;I would like to set conky as a start-up application so I do not have to run &lt;code&gt;conky&lt;/code&gt; in the terminal after every boot. My conky is based of a template I found on reddit and I have edited it. It can be found below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# conky configuration&#xA;##############################################&#xA;# Settings&#xA;##############################################&#xA;background yes&#xA;use_xft yes&#xA;xftfont Liberation Sans:size=9&#xA;xftalpha 1&#xA;update_interval 0.5&#xA;update_interval_on_battery 1&#xA;total_run_times 0&#xA;own_window yes&#xA;own_window_transparent yes&#xA;own_window_type normal&#xA;##############################################&#xA;## cairo-compmgr&#xA;own_window_argb_visual yes&#xA;##############################################&#xA;own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager&#xA;double_buffer yes&#xA;maximum_width 270&#xA;draw_shades no&#xA;draw_outline no&#xA;draw_borders no&#xA;draw_graph_borders no&#xA;default_color ffffff&#xA;default_shade_color 000000&#xA;default_outline_color 828282&#xA;alignment top_left&#xA;gap_x 12&#xA;gap_y 10&#xA;no_buffers yes&#xA;uppercase no&#xA;cpu_avg_samples 4&#xA;override_utf8_locale no&#xA;&#xA;##############################################&#xA;# colors&#xA;&#xA;color1 FFFFFF&#xA;color2 FFA500&#xA;&#xA;##############################################&#xA;#  Output&#xA;##############################################&#xA;&#xA;TEXT&#xA;${font sans-serif:bold:size=8}SYSTEM ${hr 2}&#xA;${font sans-serif:bold:size=8}HOST:$alignr$nodename&#xA;${font sans-serif:bold:size=8}KERNEL:$alignr$kernel&#xA;${font sans-serif:bold:size=8}UPTIME:$alignr$uptime_short&#xA;${font sans-serif:bold:size=8}BATTERY:${alignr}${battery_percent}%&#xA;${battery_bar}&#xA;&#xA;${font sans-serif:bold:size=8}PROCESSOR ${hr 2}&#xA;&#xA;CPU TOTAL: ${cpu cpu0}% ${cpubar cpu0}&#xA;${font sans-serif:bold:size=8}${cpugraph cpu0 20,270 FFFF00 FF0000}&#xA;&#xA;CORE 1: ${cpu cpu1}% ${cpubar cpu1}&#xA;${font sans-serif:bold:size=8}${cpugraph cpu1 20,270 FFFF00 FF0000}&#xA;&#xA;CORE 2: ${cpu cpu2}% ${cpubar cpu2}&#xA;${font sans-serif:bold:size=8}${cpugraph cpu2 20,270 FFFF00 FF0000}&#xA;&#xA;${font sans-serif:bold:size=8}MEMORY ${hr 2}&#xA;${font sans-serif:normal:size=8}RAM $alignc $mem / $memmax $alignr $memperc%&#xA;$membar&#xA;SWAP $alignc ${swap} / ${swapmax} $alignr ${swapperc}%&#xA;${swapbar}&#xA;&#xA;${font sans-serif:bold:size=8}STORAGE ${hr 2}&#xA;${font sans-serif:normal:size=8}/ $alignc ${fs_used /} / ${fs_size /} $alignr&#xA;${fs_bar /}&#xA;${font sans-serif:normal:size=8}/home $alignc ${fs_used /home} / ${fs_size /home} $alignr&#xA;${fs_bar /home}&#xA;&#xA;${font sans-serif:bold:size=8}TOP PROCESSES ${hr 2}&#xA;${font sans-serif:bold:size=8}NAME${alignc}   PID${alignr}${alignr}% MEM&#xA;${font sans-serif:normal:size=7}${top_mem name 1}${alignc}${top_mem pid 1}${alignr}${top mem 1}%&#xA;${top_mem name 2}${alignc}${top_mem pid 2}${alignr}${top mem 2}%&#xA;${top_mem name 3}${alignc}${top_mem pid 3}${alignr}${top mem 3}%&#xA;${top_mem name 4}${alignc}${top_mem pid 4}${alignr}${top mem 4}%&#xA;#${top_mem name 5}${alignc}${top_mem pid 5}${alignr}${top mem 5}%&#xA;#${top_mem name 6}${alignc}${top_mem pid 6}${alignr}${top mem 6}%&#xA;#${top_mem name 7}${alignc}${top_mem pid 7}${alignr}${top mem 7}%&#xA;&#xA;${font sans-serif:bold:size=8}NETWORK${font sans-serif:normal:size=8} (${addr wlan0}) ${hr 2}&#xA;Signal: $alignr ${wireless_link_qual_perc wlan0}%&#xA;${downspeedgraph wlan0 20,270 00FF00 0000FF -l}&#xA;Download: ${downspeed wlan0} $alignr Total: ${totaldown wlan0}&#xA;${upspeedgraph wlan0 20,270 5F00FF FF0044 -l}&#xA;Upload: ${upspeed wlan0} $alignr Total: ${totalup wlan0}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="663" LastActivityDate="2015-09-17T18:57:53.180" Title="How can I make conky run on boot?" Tags="|boot|startup|conky|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2037" PostTypeId="2" ParentId="2036" CreationDate="2015-09-17T18:57:53.180" Score="4" Body="&lt;ol&gt;&#xA;&lt;li&gt;In system settings, choose Applications&lt;/li&gt;&#xA;&lt;li&gt;Click on startup tab&lt;/li&gt;&#xA;&lt;li&gt;In the left bottom corner you will see a '+' button, click it&lt;/li&gt;&#xA;&lt;li&gt;You will find a box to type in a custom command, type in the conky there. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2427" LastActivityDate="2015-09-17T18:57:53.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2038" PostTypeId="1" CreationDate="2015-09-17T19:12:56.567" Score="0" ViewCount="312" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Z8lRT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z8lRT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I test install freya on dell vostro 5480 UEFI (installed 1 os)&#xA;I'm not good at English!&lt;/p&gt;&#xA;" OwnerUserId="2428" LastActivityDate="2015-09-17T21:54:27.973" Title="can't boot to os Freya 0.3.1" Tags="|release-freya|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2015-09-20T11:41:22.900" ContentLicense="CC BY-SA 3.0" />
  <row Id="2040" PostTypeId="1" CreationDate="2015-09-17T20:33:10.630" Score="2" ViewCount="138" Body="&lt;p&gt;I've slowly been working on a Toshiba Chromebook on Freya with the modified SeaBios that allows legacy boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything (since kernel update) has been working very well. Though I cannot seem to get it to automatically sleep. I've set it to sleep when not used for 10 minutes while on battery and every time I check it has not went to sleep even though when I unlock there is a notification in the top left corner warning &lt;strong&gt;will go to sleep soon&lt;/strong&gt;. That sleep/suspend part never happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good news, I can manually suspend and it works like a charm. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my first time digging through an issue like this. Any tips on where to look would be useful. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2319" LastEditorUserId="3757" LastEditDate="2016-04-25T07:38:34.970" LastActivityDate="2016-04-25T07:38:34.970" Title="Toshiba Chromebook, Freya 0.3.1, Kernel 4.2 - trying to get automatic sleep working" Tags="|release-freya|chromebook|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2041" PostTypeId="1" CreationDate="2015-09-17T20:35:36.433" Score="-2" ViewCount="3673" Body="&lt;p&gt;Hello guys i need install elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Erase Chromebook system completely,and install Elementary OS on a clean installation my model is ASUS C200 I hope anyone have a guide, thanks...&lt;/p&gt;&#xA;" OwnerUserId="2431" LastEditorUserId="3757" LastEditDate="2016-05-06T14:20:34.213" LastActivityDate="2019-03-24T14:29:52.193" Title="I want install elementary OS on Chromebook any help?" Tags="|chromebook|" AnswerCount="1" CommentCount="1" ClosedDate="2015-09-20T11:32:47.000" ContentLicense="CC BY-SA 3.0" />
  <row Id="2042" PostTypeId="2" ParentId="2038" CreationDate="2015-09-17T21:54:27.973" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya has a known UEFI bug. You can find details here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;Here is a sister thread that walks through the fix.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need anything explained and I will try my best to expound on their solution.&lt;/p&gt;&#xA;" OwnerUserId="2361" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-17T21:54:27.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2043" PostTypeId="1" CreationDate="2015-09-17T22:01:38.690" Score="1" ViewCount="100" Body="&lt;p&gt;After completing the installation process, when I boot I am getting the following message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Disk Drive for &lt;code&gt;/dev/mapper/cryptswap1&lt;/code&gt; is not ready yet or not present.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Continue to wait, or Press S to skip mounting or M for Manual Recovery&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in the link below you can read the result of commands&#xA;    cat /etc/fstab&#xA;    lsblk&#xA;    pvs &#xA;    vgs&#xA;    lvs &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.evernote.com/shard/s6/sh/b745d987-5f24-4bf3-9221-3a26f020537a/e68ec509774c0fc93b1e6e45ac85e4c8&quot; rel=&quot;nofollow&quot;&gt;https://www.evernote.com/shard/s6/sh/b745d987-5f24-4bf3-9221-3a26f020537a/e68ec509774c0fc93b1e6e45ac85e4c8&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had Windows 7 installed, so I chose a dual boot installation from the elementary OS installation ISO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks you for your help!&lt;/p&gt;&#xA;" OwnerUserId="2432" LastEditorUserId="3757" LastEditDate="2016-04-25T07:37:47.183" LastActivityDate="2016-04-25T07:37:47.183" Title="Problem installing Elementary os on a dual boot windows 7 configuration" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2045" PostTypeId="2" ParentId="1554" CreationDate="2015-09-18T03:09:00.363" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vvQIM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vvQIM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same problem, and this worked for me. Clicking that will reset the monitor config to default&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice the &lt;code&gt;key file contains key &quot;Monitor&quot; in group &quot;PlankDockPreferences&quot;&lt;/code&gt; in your terminal output? I'm not sure, but I am guessing it's because I sometimes plug in a 2nd monitor and I shift the displays around and Tweaks is trying to save it. After I unplug the monitor the configurations causes an error and quits. &lt;/p&gt;&#xA;" OwnerUserId="2435" LastActivityDate="2015-09-18T03:09:00.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2047" PostTypeId="1" CreationDate="2015-09-18T07:56:49.293" Score="3" ViewCount="857" Body="&lt;p&gt;I have a 64-bit machine, and I am installing the 64-bit version of elementary OS. I have removed my previous OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want elementary, so I am doing a full installation.&lt;br&gt;&#xA;So I select the option to wipe the entire hard disk and install elementary. But at the end it gives the error message &quot;grub-pc failed to install into /target/&quot;. I don't understand, I am not partitioning anything manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then why am I getting this problem? I searched on the net and found that sometimes we face a problem due to an existing EFI partition of Windows 8 and above. But I don't have Windows 8. Do I need to create an EFI partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I need to create EFI partition, Kindly tell me how to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now I am using 32-bit version, I didn't have any problem with it. But I want 64-bit.&lt;/p&gt;&#xA;" OwnerUserId="2436" LastEditorUserId="242" LastEditDate="2015-12-07T17:12:39.240" LastActivityDate="2015-12-07T17:12:39.240" Title="Unable to install elementary 64-bit" Tags="|system-installation|grub|64-bit|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2048" PostTypeId="2" ParentId="2041" CreationDate="2015-09-18T09:10:05.220" Score="2" Body="&lt;p&gt;I don't have a Asus C200, but I just installed Elementary OS on my Acer C720p. Some of the following parts are hardware dependent. You may want to check this for your Chromebook on Google, but I hope this gives you a viable start anyway.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Enable the developer mode in ChromeOS. Please check how you can do this.&lt;/li&gt;&#xA;&lt;li&gt;Open a &quot;real&quot; shell, i.e. press alt+ctrl+t and execute &lt;code&gt;shell&lt;/code&gt; in the command line.&lt;/li&gt;&#xA;&lt;li&gt;Check on &lt;a href=&quot;https://johnlewis.ie/custom-chromebook-firmware/rom-download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://johnlewis.ie/custom-chromebook-firmware/rom-download/&lt;/a&gt; if your Chromebook is supported. Read through this page including the warnings and the FAQ. Decide if you really want to continue.&lt;/li&gt;&#xA;&lt;li&gt;run &lt;code&gt;cd;bash &amp;lt;(curl https://johnlewis.ie/flash_cb_fw.sh)&lt;/code&gt; and first make a &lt;strong&gt;backup&lt;/strong&gt;. Store this backup somewhere that is not your chromebook.&lt;/li&gt;&#xA;&lt;li&gt;Install the SeaBios payload for coreboot using the same command. It provides you several options.&lt;/li&gt;&#xA;&lt;li&gt;The installer may fail and tell you that your coreboot is write-protected. If that is the case please check google how to disable it. I had to remove a screw on my C720p.&lt;/li&gt;&#xA;&lt;li&gt;After that plugin in an Elementary OS USB install medium. On boot you need to press ESC and a boot menu will pop up. Select boot from USB.&lt;/li&gt;&#xA;&lt;li&gt;For me the install would not start and show me an error about not enough memory. To solve this select the installer from the Elementary OS boot menu. Press tab and add the following text line you see &quot; mem=1024M&quot;. Press enter and the installer will start.&lt;/li&gt;&#xA;&lt;li&gt;Make sure that you connect your Chromebook to the internet while installing (just follow the prompt of the installer). It would not install grub correctly if it is not connected to the internet. Looks like there is a package missing on the USB drive that is required for chromebooks.&lt;/li&gt;&#xA;&lt;li&gt;Now your Chromebook should boot Elementary OS just fine. There is one more thing you should do: edit /etc/default/grub, remove the &quot;mem=1024M&quot; part found in the parameter GRUB_CMDLINE_LINUX, save the file and &lt;code&gt;run sudo update-grub&lt;/code&gt;  in a terminal.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That worked for me. Took some time to figure it out, but Elementary OS works fine on my Chromebook.&lt;/p&gt;&#xA;" OwnerUserId="939" LastEditorDisplayName="user8304" LastEditDate="2019-03-24T14:29:52.193" LastActivityDate="2019-03-24T14:29:52.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2051" PostTypeId="2" ParentId="1972" CreationDate="2015-09-18T09:53:56.640" Score="1" Body="&lt;p&gt;This error could be a result of an old gvfs package as described here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1421345&quot; rel=&quot;nofollow&quot;&gt;gvfsd-ftp crash&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This has been fixed in Ubuntu by updating the gvfs package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try these steps to update gvfs as shown &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/1361906/comments/10&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the package &quot;debian-archive-keyring&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install debian-archive-keyring&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the following line at the end of the file &quot;/etc/apt/sources.list&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;deb &lt;a href=&quot;http://ftp.debian.org/debian/&quot; rel=&quot;nofollow&quot;&gt;http://ftp.debian.org/debian/&lt;/a&gt; unstable main contrib&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Refresh repositories:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update gvfs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install gvfs&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete or comment the line previously added in the file &quot;/etc/apt/sources.list&quot;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Refresh repositories:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-18T09:53:56.640" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2052" PostTypeId="1" CreationDate="2015-09-18T10:14:25.967" Score="2" ViewCount="566" Body="&lt;p&gt;How can I enable differend keyboard layout in different applications? Switch button in settings not working =(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Теперь по-русски =)&#xA;Как сделать свою раскладку для каждого окна? В юнити работало, в кедах работало, а затем я открыл для себя elementary, поставил, настроил смену раскладки, но вот меняется она глобально почему-то, хотя соответствующий тумблер в настройках включён&lt;/p&gt;&#xA;" OwnerUserId="2439" LastActivityDate="2015-11-19T16:11:43.970" Title="Different keyboard layout in different windows" Tags="|keyboard|" AnswerCount="1" CommentCount="1" ClosedDate="2015-11-20T10:34:37.740" ContentLicense="CC BY-SA 3.0" />
  <row Id="2053" PostTypeId="2" ParentId="314" CreationDate="2015-09-18T10:38:35.830" Score="8" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/users/177437/lu%c3%ads-de-sousa&quot;&gt;Luís de Sousa&lt;/a&gt; answered &lt;a href=&quot;https://askubuntu.com/questions/586424/how-do-i-display-two-windows-as-split-screen/586427#586427&quot;&gt;on Ask Ubuntu&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;To set a window occupying the left half of the screen use this shortcut:&lt;/p&gt;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;a href=&quot;https://askubuntu.com/questions/19558/what-are-the-meta-super-and-hyper-keys&quot;&gt;&lt;kbd&gt;Super&lt;/kbd&gt;&lt;/a&gt; + &lt;kbd&gt;←&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;p&gt;For the right half:&lt;/p&gt;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;a href=&quot;https://askubuntu.com/questions/19558/what-are-the-meta-super-and-hyper-keys&quot;&gt;&lt;kbd&gt;Super&lt;/kbd&gt;&lt;/a&gt; + &lt;kbd&gt;→&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;kbd&gt;Super&lt;/kbd&gt; is the Windows key.&lt;/p&gt;&#xA;" OwnerUserId="2440" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-09-20T06:06:44.943" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2054" PostTypeId="2" ParentId="2047" CreationDate="2015-09-18T11:40:46.887" Score="1" Body="&lt;p&gt;Try installing elementary without the internet connection.&lt;br&gt;&#xA;Only after you get the os to install, you should troubleshoot your internet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check this link for details: &lt;a href=&quot;https://askubuntu.com/questions/199049/how-to-fix-a-failing-grub-pc-package-installation-in-hyper-v-virtual-machine&quot;&gt;grub-pc package fails to install&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-18T11:40:46.887" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2056" PostTypeId="1" CreationDate="2015-09-18T14:21:43.430" Score="1" ViewCount="174" Body="&lt;p&gt;I am unable to discover what command is been output on the use of &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt; key combination. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gnome-screensaver-command -l&lt;/code&gt; is not it, &lt;code&gt;dm-tool -lock&lt;/code&gt; also not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody know what it is?&lt;/p&gt;&#xA;" OwnerUserId="2442" LastEditorUserId="3757" LastEditDate="2016-05-07T04:08:32.653" LastActivityDate="2016-05-07T04:08:32.653" Title="Super/Windows+L, what command does it use?" Tags="|command-line|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2057" PostTypeId="2" ParentId="2056" CreationDate="2015-09-18T16:17:20.800" Score="2" Body="&lt;p&gt;&lt;code&gt;dm-tool lock&lt;/code&gt; works for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that there is no hyphen before lock&lt;/p&gt;&#xA;" OwnerUserId="2427" LastActivityDate="2015-09-18T16:17:20.800" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2058" PostTypeId="1" AcceptedAnswerId="2066" CreationDate="2015-09-18T18:19:58.073" Score="0" ViewCount="409" Body="&lt;p&gt;I accidentally messed up with the structure of my home folder and the bookmarks in the sidebar. Can someone please provide me with a screenshot how the default home folder structure and default folder bookmarks in the &quot;Files&quot; file manager look like?&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2015-09-19T14:24:35.763" Title="What is the default home folder and bookmarks structure?" Tags="|pantheon-files|home|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2059" PostTypeId="1" AcceptedAnswerId="2068" CreationDate="2015-09-18T18:19:59.570" Score="19" ViewCount="4890" Body="&lt;p&gt;I am a vim user and I need to use &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; from time to time. Currently it pastes clipboard contents into terminal. In Luna,  &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;SHIFT&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; was used for pasting. How can I change the behavior of the terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want to remap the &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance,&#xA;Magnus.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastEditorUserId="3757" LastEditDate="2016-05-07T03:52:56.810" LastActivityDate="2020-04-07T11:35:56.790" Title="How can I disable natural copy &amp; paste in Terminal?" Tags="|pantheon-terminal|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2060" PostTypeId="1" CreationDate="2015-09-18T23:23:27.207" Score="0" ViewCount="674" Body="&lt;p&gt;Installed Elementary Freya this week and noticed that many of my Software Center Icons are missing. Is this a known issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZOt7F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZOt7F.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2445" LastActivityDate="2015-09-20T11:40:38.150" Title="Software Center Missing Icons" Tags="|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2061" PostTypeId="1" CreationDate="2015-09-18T23:54:05.523" Score="1" ViewCount="393" Body="&lt;p&gt;The Web Browser dropdown only shows Midori as available.&lt;/p&gt;&#xA;" OwnerUserId="2446" LastActivityDate="2015-09-19T02:18:54.040" Title="How to set Google Chrome to default with Default Applications?" Tags="|google-chrome|midori|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2062" PostTypeId="2" ParentId="2061" CreationDate="2015-09-19T02:18:54.040" Score="2" Body="&lt;p&gt;Open &lt;strong&gt;Chrome&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the top right, click the &lt;strong&gt;Chrome menu&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &lt;strong&gt;Settings&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &quot;Default browser&quot; section, click Make Google Chrome the default browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't see the button, Google Chrome is already your default browser. later try to restart your computer and go to &lt;strong&gt;System configuration&lt;/strong&gt; &gt; &lt;strong&gt;Aplications&lt;/strong&gt; and check if the Chrome Browser appear in the list:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YCL76.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YCL76.png&quot; alt=&quot;Chrome Browser as default&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2382" LastActivityDate="2015-09-19T02:18:54.040" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2064" PostTypeId="1" CreationDate="2015-09-19T13:48:06.353" Score="1" ViewCount="1295" Body="&lt;p&gt;I've downloaded &lt;em&gt;Intellij ultimate version&lt;/em&gt; and I am trying to open &lt;code&gt;idea.sh&lt;/code&gt; but it tells me this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;JDK Required: 'tools.jar' seems to be not in IDEA classpath. Please&#xA;   ensure JAVA_HOME points to JDK rather than JRE.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do, can anybody help? I've searched in Google but couldn't find anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;all I know is that I have jdk because when I use &lt;code&gt;java -version&lt;/code&gt; it tells me something, but I can't locate the path or somethings wrong&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo $JAVA_HOME&lt;/code&gt; returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/lib/jvm/java-7-openjdk-amd64/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this happened after I've installed &lt;code&gt;java-7-openjdk&lt;/code&gt; before that I had &lt;code&gt;java-9-oracle&lt;/code&gt; and I thought it was jdk but there were still problems&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried without sudo and everythings seems fine.&lt;/p&gt;&#xA;" OwnerUserId="2449" LastEditorUserId="2708" LastEditDate="2015-12-29T09:41:56.043" LastActivityDate="2015-12-29T09:41:56.043" Title="How do i install intelliJ on Freya" Tags="|jdk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2066" PostTypeId="2" ParentId="2058" CreationDate="2015-09-19T14:24:35.763" Score="3" Body="&lt;p&gt;Here is a screenshot of Files after a fresh installation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/X0lJJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X0lJJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FYI, you could have seen it yourself by logging into a guest session :)&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-19T14:24:35.763" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2068" PostTypeId="2" ParentId="2059" CreationDate="2015-09-19T14:47:01.823" Score="16" Body="&lt;p&gt;The ability to paste clipboard contents into the terminal using the standard &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;V&lt;/kbd&gt; shortcut is called &quot;natural-copy-paste&quot; and you can disable it in the dconf settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you haven't already done so, install &lt;strong&gt;dconf editor&lt;/strong&gt; using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;strong&gt;dconf editor&lt;/strong&gt; and navigate to &lt;strong&gt;org &gt; pantheon &gt; terminal &gt; settings&lt;/strong&gt;.&#xA;Once you're there, you can untick the option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SbRm6.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SbRm6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now pasting into the terminal using &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;V&lt;/kbd&gt; no longer works, and the former default shortcut (&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;V&lt;/kbd&gt;) is restored.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-09-19T14:47:01.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2070" PostTypeId="2" ParentId="1363" CreationDate="2015-09-19T16:24:02.363" Score="-1" Body="&lt;p&gt;Boot-Repair should fix it, this happens with every Linux and every Windows, even TinyCore (and that's the only one that you can't boot to in the bios, however core and tinycore have restore settings so USB = boot, just some useless information here.)&lt;/p&gt;&#xA;" OwnerUserId="233" LastActivityDate="2015-09-19T16:24:02.363" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2071" PostTypeId="1" AcceptedAnswerId="4337" CreationDate="2015-09-19T16:55:57.367" Score="1" ViewCount="1662" Body="&lt;p&gt;I'm trying to use evolution on elementary, but it has a &lt;a href=&quot;https://bugs.launchpad.net/egtk/+bug/1487669&quot; rel=&quot;nofollow&quot;&gt;bug&lt;/a&gt; where the preview and the composer windows show a black background, I could fix the problem for the message preview pane with these steps&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p .themes/elementary&#xA;cd .themes/elementary&#xA;cp -r /usr/share/themes/elementary/gtk-3.0 .&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then open gtk.css and add this at the end of the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*****************************&#xA;* FIX EVOLUTION BLACK EMAIL *&#xA;*****************************/&#xA;GtkWindow {&#xA;color: @theme_fg_color;&#xA;background-color: @theme_bg_color;&#xA;}&#xA;GtkPaned {&#xA;color: @theme_fg_color;&#xA;&#xA;/* Evolution sets the background color of its mail window to the background&#xA;* color of entries, but cannot handle background images. Setting the&#xA;* background color here doesn't effect real entries, because&#xA;* 'background-image' has precedence.&#xA;*/&#xA;background-color: @theme_bg_color;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;source: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1272001/comments/11&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/evolution/+bug/1272001/comments/11&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does someone knows how to fix the problem on the composer window?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is anything wrong with what I did for the preview pane?&lt;/p&gt;&#xA;" OwnerUserId="38" LastActivityDate="2017-01-11T11:54:24.160" Title="Evolution, black background on composer window" Tags="|gtk|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2074" PostTypeId="1" AcceptedAnswerId="2188" CreationDate="2015-09-19T17:48:38.300" Score="5" ViewCount="165" Body="&lt;p&gt;I once tested dual-monitor-support for Elementary and had Chrome maximized on the second screen. Everything worked out alright. I unplugged the second screen, Chrome was already closed - but when I reopened Chrome, it apparently opened up on the second screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a nicer way to get the window moved than replugging the monitor and move the window with your mouse?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disclaimer: My first question. Maybe it's stupid.&lt;/p&gt;&#xA;" OwnerUserId="2454" LastActivityDate="2015-09-27T04:35:14.423" Title="How do I move / reach a window that I &quot;left&quot; on a second screen?" Tags="|window-management|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2075" PostTypeId="1" CreationDate="2015-09-19T18:53:14.837" Score="1" ViewCount="475" Body="&lt;p&gt;I'm using Freya for a month and I connected my Xperia Z2 tablet (Android 5.0.1) and LG G3 (Android 5.0) several times before, just to manage files (music, videos). It worked just the way as it works while connecting a USB flash disk. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After upgrading my Xperia Z2 tablet to Android 5.1, Freya does not recognize the connected device at all. The tablet works as usually, it shows the connection menu etc., but there is no device recognized in folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to connect the tablet to my PC running Win10, it works fine as before the upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any advice&lt;/p&gt;&#xA;" OwnerUserId="2456" LastActivityDate="2015-09-20T14:50:13.093" Title="Connecting an Android 5.1 device - unable to detect the device" Tags="|release-freya|android|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2076" PostTypeId="2" ParentId="2064" CreationDate="2015-09-20T11:15:12.150" Score="2" Body="&lt;p&gt;Seems like you don't have de JDK, only the JRE. Try run this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install openjdk-7-jdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;java&lt;/code&gt; you see on &lt;code&gt;java -version&lt;/code&gt; is installed via the openjdk-*-jre package and it's able to run java applications. But to develop java (and run most of java IDEs) you need the openjdk-*-jdk packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're still having trouble, try this links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/122133/tools-jar-is-not-in-idea-classpath&quot;&gt;https://askubuntu.com/questions/122133/tools-jar-is-not-in-idea-classpath&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/questions/24992038/intellij-cant-find-tools-jar-without-sudo&quot;&gt;https://stackoverflow.com/questions/24992038/intellij-cant-find-tools-jar-without-sudo&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2015-09-20T11:15:12.150" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2077" PostTypeId="2" ParentId="2060" CreationDate="2015-09-20T11:40:38.150" Score="1" Body="&lt;p&gt;Yes, this is a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1417347&quot; rel=&quot;nofollow&quot;&gt;known issue&lt;/a&gt;. Not sure will it be resolved or not since the elementary team is working on developing its own application centre for the next release.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-09-20T11:40:38.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2078" PostTypeId="1" CreationDate="2015-09-20T13:52:50.927" Score="1" ViewCount="134" Body="&lt;p&gt;If i want to adjust screen brightness on my laptop, brightness indicator it's working ok, but brightness it's remaining on maximum intensity.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's possible to decrease screen brightness intensity ?&lt;/p&gt;&#xA;" OwnerUserId="2462" LastActivityDate="2015-09-20T13:52:50.927" Title="How to increase/decrease brightness on my laptop Toshiba Tecra" Tags="|brightness|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2080" PostTypeId="2" ParentId="2075" CreationDate="2015-09-20T14:50:13.093" Score="1" Body="&lt;p&gt;On your tablet, go to Settings &gt; Xperia Connectivity &gt; USB Connectivity and select MSC as USB mode. Sony does not ship the MTP drivers for Linux.&lt;/p&gt;&#xA;" OwnerUserId="2463" LastActivityDate="2015-09-20T14:50:13.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2082" PostTypeId="1" AcceptedAnswerId="2109" CreationDate="2015-09-20T19:30:10.687" Score="5" ViewCount="585" Body="&lt;p&gt;Any chance that I can open a file with custom codes or a custom made application or a Wine software at Files? I can do that with Dolphin or Nemo, but I don't like Nemo that much and Dolphin is too heavy and slow for me. I love Files except this particular thing. I searched at here and Google but couldn't find a solution and I don't mean it like this:&#xA;&lt;a href=&quot;https://unix.stackexchange.com/questions/92494/how-to-add-open-folder-as-root-in-elementary-os-file-manager-context-menu&quot;&gt;https://unix.stackexchange.com/questions/92494/how-to-add-open-folder-as-root-in-elementary-os-file-manager-context-menu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At least a way to open files with Wine applications.&lt;/p&gt;&#xA;" OwnerUserId="2460" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2015-09-22T00:45:26.057" Title="Any chance to add custom code or an application to &quot;Open with&quot; option at Files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2083" PostTypeId="2" ParentId="1946" CreationDate="2015-09-20T20:18:00.860" Score="37" Body="&lt;p&gt;You can assign &lt;kbd&gt;Super&lt;/kbd&gt; key to open Slingshot-launcher on &lt;strong&gt;Loki&lt;/strong&gt; with following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter overlay-key &quot;'Super_L'&quot;&#xA;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'wingpanel --toggle-indicator=app-launcher'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2016-06-30T14:38:05.697" LastActivityDate="2016-06-30T14:38:05.697" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2084" PostTypeId="1" CreationDate="2015-09-20T20:56:37.087" Score="6" ViewCount="272" Body="&lt;p&gt;After recent kernel (3.19.0-28-generic) and upgrades from daily repos, I realised that closing the lid no longer suspends the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running a state checker shows the laptop knows the lid is closing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;while true; do cat /proc/acpi/button/lid/LID/state ; sleep 3; done&#xA;state:      open&#xA;state:      open&#xA;state:      closed&#xA;state:      open&#xA;state:      open&#xA;state:      closed&#xA;state:      open&#xA;state:      open&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also made a lid.sh file in /etc/acpi/local, which i think worked once only!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA; if grep -q closed /proc/acpi/button/lid/LID/state&#xA; then&#xA;     /usr/sbin/pm-suspend&#xA; fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This feature used to work fine until recently. Toshiba Portege R830&lt;/p&gt;&#xA;" OwnerUserId="280" LastActivityDate="2016-03-12T00:07:53.360" Title="Closing the lid no longer suspends the laptop" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2085" PostTypeId="2" ParentId="1949" CreationDate="2015-09-20T21:39:49.903" Score="2" Body="&lt;p&gt;There is a way and it is actually has been explained in I believe /org/pantheon/desktop/behavior which is seems like settings area that we can access with dconf-editor (or you can see .xml version of it at /usr/share/glib-2.0/schemas/org.pantheon.desktop.gala.gschema.xml)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you just put a single command, it will be used for every hotcorner&#xA;  assigned to 'custom-command'. If you instead use the pattern&#xA;  'hotcorner-topleft:command;;hotcorner-bottomright:command' the&#xA;  specific commands will be used per hotcorner. Possible identifiers are&#xA;  'hotcorner-[topleft; topright; bottomleft; bottomright]' followed by a&#xA;  ':' and then the command. ';;' is used as delimiter between command&#xA;  defintions.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So I am using a devilspie command for minimizing all windows as you can find from here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/396/how-can-i-view-the-desktop&quot;&gt;How can I view the desktop?&lt;/a&gt;&#xA;which requires for me to write :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;devilspie /home/[user]/minimize.ds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;at Custom Command are of System-Settings / Desktop / Hot Corners.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I have to choose bottom-right (my choice) hot corner as Execute Custom Command right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as in your case if I want to use a custom command at bottom-left hot corner e.g. firefox, I have to change my custom code as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hotcorner-bottomleft:firefox;;hotcorner-bottomright:devilspie /home/[user]/minimize.ds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that simply choosing both bottom corners as Execute Custom Command will be enough to solve your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if your &lt;code&gt;left&lt;/code&gt; argument code is at &lt;code&gt;/home/[user]/left.sh&lt;/code&gt; and if your &lt;code&gt;right&lt;/code&gt; argument code is at &lt;code&gt;/home/[user]/right.sh&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hotcorner-bottomleft:/home/[user]/left.sh;;hotcorner-bottomright:/home/[user]/right.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;should solve it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.: This answer was for assuming you wanted to create two different custom script for each left and right arguments and use them in different corners.&lt;/p&gt;&#xA;" OwnerUserId="2460" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-20T21:39:49.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2086" PostTypeId="1" AcceptedAnswerId="2148" CreationDate="2015-09-20T21:44:57.137" Score="2" ViewCount="393" Body="&lt;p&gt;I have installed Freya on a Macbook Pro from 2010. Works great, except for one odd issue: When I turn on the propritary NVIDIA driver and reboot, the system hangs when starting up the X-server. The only thing that I can do then is to boot the root terminal from the recovery mode and remove all &lt;code&gt;nvidia-*&lt;/code&gt; packages. So how can we make this work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the GPU is a GT330M, but I don't know that for sure.&lt;/p&gt;&#xA;" OwnerUserId="2467" LastActivityDate="2015-09-24T10:24:16.627" Title="Turning on NVIDIA propritary driver on Macbook Pro makes it hang on reboot" Tags="|release-freya|graphic-drivers|boot|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2087" PostTypeId="1" CreationDate="2015-09-20T22:42:28.387" Score="1" ViewCount="214" Body="&lt;p&gt;I am a first time linux user trying to install elementary os on my old macbook. I followed a guide on elementary.io/docs/installation on how to install it.  I got the ISO image on a usb and rebooted my computer.  Once I opened the boot selection screen I selected the &quot;EFI BOOT&quot;, which opened up the installation screen.  Unfortunately, the screen says &quot;No other detected operating systems&quot;.  It gives me an option to erase the hard drive and install the os (which i do not want to do) and another option which i am not comfortable with.  I have no idea what to do from here and i do not want to erase OSX.  Any help on how to resolve this issue would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2468" LastActivityDate="2015-10-02T18:14:34.653" Title="&quot;No detected operating systems&quot; - What should I do?" Tags="|system-installation|boot|dual-boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2088" PostTypeId="1" CreationDate="2015-09-21T05:00:58.870" Score="1" ViewCount="1769" Body="&lt;p&gt;After i install elementary os, when i restart the computer i get the GNU GRUB screen instead of the operating system. I have an intel i5 processor and nvidia gt740 graphics card.&lt;/p&gt;&#xA;" OwnerUserId="2469" LastActivityDate="2015-09-24T01:59:44.717" Title="After installation, when rebooting i get the grub instead of elementary os" Tags="|release-freya|" AnswerCount="3" CommentCount="1" ClosedDate="2015-09-21T17:41:22.627" ContentLicense="CC BY-SA 3.0" />
  <row Id="2090" PostTypeId="2" ParentId="2088" CreationDate="2015-09-21T10:40:42.603" Score="-1" Body="&lt;p&gt;The easiest way to fix it, is to install ubuntu alongside with elementary OS. Ubuntu make right grub with two OS. After that you can delete Ubuntu ..&lt;/p&gt;&#xA;" OwnerUserId="2472" LastEditorUserId="34" LastEditDate="2015-09-24T01:59:44.717" LastActivityDate="2015-09-24T01:59:44.717" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2091" PostTypeId="2" ParentId="2088" CreationDate="2015-09-21T14:28:44.393" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya has a known UEFI bug. You can find details here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;Here is a sister thread that walks through the fix.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need anything explained and I will try my best to expound on their solution.&lt;/p&gt;&#xA;" OwnerUserId="2361" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-21T14:28:44.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2093" PostTypeId="1" CreationDate="2015-09-21T15:11:56.347" Score="6" ViewCount="2005" Body="&lt;p&gt;I want to know how i can reduce the height of the top panel, i've search on google but i cant`t find an answer.&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2475" LastEditorUserId="37" LastEditDate="2015-09-21T15:57:12.750" LastActivityDate="2018-12-22T11:02:50.597" Title="Reduce the height of the top panel on Elementary OS Freya" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2094" PostTypeId="1" CreationDate="2015-09-21T16:05:01.313" Score="1" ViewCount="469" Body="&lt;p&gt;Your system is very beautiful! &#xA;But I stalknulsya a problem after installing the driver on the GTX970 system is not loaded (started only after recovering of one line).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[0.634731] acpi pcc probe failed.&lt;/p&gt;&#xA;" OwnerUserId="2477" LastActivityDate="2015-10-05T21:00:20.320" Title="acpi pcc probe failed" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2095" PostTypeId="2" ParentId="2088" CreationDate="2015-09-21T16:24:38.500" Score="0" Body="&lt;p&gt;to fix this all i did was boot into the live cd connect to wifi or ethernet&#xA;then run these commands into the terminal:&#xA;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&lt;/p&gt;&#xA;&#xA;&lt;p&gt;once boot repair opens click advanced options then go to grub options then check purge grub before reinstalling then click apply &#xA;once it is done shutdown the laptop take out the live cd then it should boot as normal&lt;/p&gt;&#xA;" OwnerUserId="2478" LastActivityDate="2015-09-21T16:24:38.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2096" PostTypeId="1" CreationDate="2015-09-21T17:19:06.880" Score="1" ViewCount="430" Body="&lt;p&gt;I'm trying to use &lt;a href=&quot;https://hola.org/&quot; rel=&quot;nofollow&quot;&gt;Hola&lt;/a&gt;'s full VPN feature. In their setup guide they give instructions only for Windows and Android, but I should be able to use that info on Linux as well, i.e. VPN server, username and password.&#xA;Unfortunately, after setting up my VPN connection in the network manager, the connection fails. &#xA;Here's a syslog output: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; Starting VPN service 'pptp'...&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 8796&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN service 'pptp' appeared; activating connections&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN plugin state changed: starting (3)&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN connection 'VPN connection 1' (Connect) reply received.&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pppd[8800]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded.&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pppd[8800]: pppd 2.4.5 started by root, uid 0&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pppd[8800]: Using interface ppp0&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pppd[8800]: Connect: ppp0 &amp;lt;--&amp;gt; /dev/pts/8&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pptp[8803]: nm-pptp-service-8796 log[main:pptp.c:314]: The synchronous pptp option is NOT activated&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;warn&amp;gt; /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...&#xA;Sep 21 19:14:55 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'&#xA;Sep 21 19:14:56 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_disp:pptp_ctrl.c:739]: Received Start Control Connection Reply&#xA;Sep 21 19:14:56 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_disp:pptp_ctrl.c:773]: Client connection established.&#xA;Sep 21 19:14:56 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_disp:pptp_ctrl.c:858]: Received Outgoing Call Reply.&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_disp:pptp_ctrl.c:897]: Outgoing call established (call ID 0, peer's call ID 47232).&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pppd[8800]: MS-CHAP authentication failed: &#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pppd[8800]: CHAP authentication failed&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pppd[8800]: Connection terminated.&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;warn&amp;gt; VPN plugin failed: 1&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0)&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[callmgr_main:pptp_callmgr.c:258]: Closing connection (shutdown)&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 12 'Call-Clear-Request'&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[pptp_read_some:pptp_ctrl.c:544]: read returned zero, peer has closed&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pptp[8818]: nm-pptp-service-8796 log[call_callback:pptp_callmgr.c:79]: Closing connection (call state)&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 pppd[8800]: Exit.&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;warn&amp;gt; VPN plugin failed: 1&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN plugin state changed: stopped (6)&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; VPN plugin state change reason: 0&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;info&amp;gt; Policy set 'TNCAPC8C720' (wlan0) as default for IPv4 routing and DNS.&#xA;Sep 21 19:14:57 giulio-Lenovo-G580 NetworkManager[1075]: &amp;lt;warn&amp;gt; error disconnecting VPN: Could not process the request because no VPN connection was active.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me if there's anything wrong there or walk me through the setup?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: I had no problems establishing a connection on my Android tablet.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2022-01-14T11:53:29.027" Title="How can I troubleshoot a &quot;VPN connection failed&quot;?" Tags="|networking|vpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2097" PostTypeId="1" CreationDate="2015-09-21T18:27:48.070" Score="2" ViewCount="1150" Body="&lt;p&gt;Any idea? There is no box for my password and I get HTTP-Error 8 (Message Corrupt). I used &lt;a href=&quot;https://mysite.com/owncloud/remote.php/caldav/&quot; rel=&quot;nofollow&quot;&gt;https://mysite.com/owncloud/remote.php/caldav/&lt;/a&gt; and as username me@mysite.com. &lt;/p&gt;&#xA;" OwnerUserId="2480" LastActivityDate="2021-11-10T11:58:48.247" Title="How do I use my ownCloud Caldav with the Calendar Application?" Tags="|calendar|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2098" PostTypeId="1" CreationDate="2015-09-21T18:34:17.387" Score="-4" ViewCount="9196" Body="&lt;p&gt;How to change elementary OS Themes ?&#xA;Is it possible to add new themes ?&lt;/p&gt;&#xA;" OwnerUserId="2462" LastEditorUserId="3757" LastEditDate="2016-04-25T01:47:19.070" LastActivityDate="2016-04-25T01:47:19.070" Title="How to change elementary OS themes" Tags="|themes|" AnswerCount="2" CommentCount="0" ClosedDate="2015-09-24T21:07:22.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="2099" PostTypeId="2" ParentId="2098" CreationDate="2015-09-21T19:01:16.190" Score="6" Body="&lt;p&gt;This answer does cover your question about how to change themes:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/45/how-can-i-add-more-themes-on-elementary-tweaks&quot;&gt;How can I add more themes on Elementary-Tweaks?&lt;/a&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install new themes and themes' usually have their own instructions at their files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see from elementary-tweaks the themes that is installed but it is not recommended since elementary-tweaks is no longer maintained. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can use dconf-editor to change the theme (also developers warns that dconf-editor can show you some options that should not be messed in order to not break the system , dconf is a bit like the registry editor on Windows).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For dconf-editor;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and install if you don't have dconf-editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open dconf-editor at terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;CTRL + F and write gtk-theme, as changing the value of gtk-theme you can change your theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can change your window theme with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences theme &quot;NameOfTheme&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2460" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-24T06:32:48.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2100" PostTypeId="1" AcceptedAnswerId="2106" CreationDate="2015-09-21T19:01:29.003" Score="3" ViewCount="2966" Body="&lt;p&gt;I thought I fixed my low-sound-issue after I edited &lt;code&gt;/etc/modprobe.d/alsa-base.conf&lt;/code&gt; and added&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;options snd-hda-intel vid=8086 pid=8ca0 snoop=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I did a reboot and now my sound is low again. All settings are at max...&lt;/p&gt;&#xA;" OwnerUserId="2356" LastEditorUserId="190" LastEditDate="2015-09-22T01:29:58.720" LastActivityDate="2018-11-21T07:37:46.123" Title="Why is my sound so low?" Tags="|sound|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2101" PostTypeId="1" CreationDate="2015-09-21T20:13:45.677" Score="3" ViewCount="875" Body="&lt;p&gt;I am having trouble getting my audio to work on elementary os after installation. It does work when I plug in my USB headset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I am running os on CB35-B3340 Toshiba Chromebook 2 - Swanky.&lt;br&gt;&#xA;Intel® Celeron® Processor N2840&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know the commands you would like me to run in order to gather information to help troubleshoot the issues.&lt;/p&gt;&#xA;" OwnerUserId="2483" LastEditorUserId="45" LastEditDate="2015-09-30T19:11:45.483" LastActivityDate="2016-08-20T04:27:56.093" Title="No Audio after installation" Tags="|hardware|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2102" PostTypeId="2" ParentId="2098" CreationDate="2015-09-21T20:17:02.200" Score="2" Body="&lt;p&gt;An Example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://github.com/horst3180/Arc-theme&quot; rel=&quot;nofollow&quot;&gt;Arc Theme&lt;/a&gt;&lt;/strong&gt; have a readme file with a tutorial for install that theme&lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="3757" LastEditDate="2016-04-24T06:18:09.883" LastActivityDate="2016-04-24T06:18:09.883" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2103" PostTypeId="1" CreationDate="2015-09-21T20:46:09.967" Score="1" ViewCount="37" Body="&lt;p&gt;I'm not sure exactly why these packages were removed, unless for an upgrade. But this current installation of elementary OS that I'm running was finally installed after 2 failed attempts where grub wouldn't install to &lt;code&gt;/dev/sda&lt;/code&gt; (I finally went to the live desktop on the USB and installed from the desktop).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I'm not sure if I should be worried about this, because the computer is running fine, but it's just more out of curiosity as to why these packages were removed during installation. I was also connected to the Internet at the time to update packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OIZ3V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OIZ3V.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2484" LastEditorUserId="3757" LastEditDate="2016-04-18T13:17:48.630" LastActivityDate="2016-04-18T13:17:48.630" Title="GRUB packages removed during installation?" Tags="|grub|package-management|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2104" PostTypeId="1" AcceptedAnswerId="2105" CreationDate="2015-09-21T22:00:56.973" Score="1" ViewCount="1686" Body="&lt;p&gt;When i have the Chrome not full on my monitor the Transparency in the bar where i see the &quot;Aplications&quot;, the hours, and the icons is transparent&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nUVdk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nUVdk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but when I expand the chrome for see totally in my screen, the bar goes black&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Liuy9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Liuy9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix this with every program? I like the transparency in the bar&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry, im newbie in linux, and I dont know if this is possible&lt;/p&gt;&#xA;" OwnerUserId="2382" LastActivityDate="2015-09-21T22:27:26.557" Title="Problem with Transparency in menu" Tags="|release-freya|wingpanel|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2105" PostTypeId="2" ParentId="2104" CreationDate="2015-09-21T22:27:26.557" Score="3" Body="&lt;p&gt;This should work (I can't try at my own OS because my wingpanel modified by code):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(if you don't have dconf-editor simply &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then search (CTRL + F) for wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When wingpanel page opened, uncheck &lt;strong&gt;auto-adjust-alpha&lt;/strong&gt; and change &lt;strong&gt;background-alpha&lt;/strong&gt; to &lt;strong&gt;0&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should make your wingpanel transparent both at maximized windows and non-maximized windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course you can adjust &lt;strong&gt;background-alpha&lt;/strong&gt; as you wish to your own preference. &lt;/p&gt;&#xA;" OwnerUserId="2460" LastActivityDate="2015-09-21T22:27:26.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2106" PostTypeId="2" ParentId="2100" CreationDate="2015-09-21T22:35:46.967" Score="2" Body="&lt;p&gt;Maybe this could help:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Hi there.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;I've got the same Problem with my Asus Z97 Deluxe and the ALC1150&#xA;  Audio Controller. In search for a solution i found this thread and&#xA;  added to my &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;/etc/modprobe.d/alsa-base.conf&lt;/code&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;as follows &quot;options&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;snd-hda-intel vid=8086 pid=8ca0 snoop=0&quot;&lt;/code&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If that not works and you&#xA;  have a  ALC883 or similar soundchip you may need to add to your&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;/etc/modules&lt;/code&gt;  to &lt;code&gt;&quot;snd-hda-intel vid=8086 pid=8ca0 snoop=0&quot;&lt;/code&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;After that reboot. It works fine with my board and i'm happy to hear&#xA;  my music in fine quality. &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Best regards Elrico&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It's from here:&#xA;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=181764&amp;amp;p=2&quot; rel=&quot;nofollow&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=181764&amp;amp;p=2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like a few people who had your problem solved it with this.&lt;/p&gt;&#xA;" OwnerUserId="2460" LastActivityDate="2015-09-21T22:35:46.967" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2107" PostTypeId="1" CreationDate="2015-09-21T23:24:12.927" Score="0" ViewCount="699" Body="&lt;p&gt;So I've read up on the forum that this is a recurring problem, but this might give just a little more insight.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed elementary OS (latest version) on my laptop. The SSD was clean and formatted. &#xA;When the installation was done, I rebooted and came onto the grub error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried this solution, but it did not work for me.&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801/comments/5&quot; rel=&quot;nofollow&quot;&gt;Comment 5 for bug 1492801&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i did do this, I got an error when i tabbed to look for a configfile. it stated:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;hd0 hd1 hd2error: failure reading sector 0xe8adb0 from hd0&#xA;and then some more read errors from hd0 and hd2&#xA;(hd 1 is swap)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm looking for a fix and will update if i do find one.&lt;/p&gt;&#xA;" OwnerUserId="2485" LastActivityDate="2015-09-22T01:13:46.327" Title="Boot to GRUB after fresh install" Tags="|system-installation|boot|grub|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ClosedDate="2015-09-24T21:21:51.190" ContentLicense="CC BY-SA 3.0" />
  <row Id="2108" PostTypeId="1" CreationDate="2015-09-22T00:22:20.710" Score="6" ViewCount="578" Body="&lt;p&gt;I use elementary os from the previous version (luna) and now I've installed Freya;&#xA;I really liked the way &quot;luna&quot; was managing workspaces, and I really don't like the way &quot;freya&quot; is doing it;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've disabled &quot;workspaces-only-on-primary&quot; using dconf (org.gnome.mutter), but even now, the multitasking view only shows applications running on the first monitor (second monitor is simply empty while using it);&#xA;is there a way to make it work in both monitors and most of all to show in it all running applications in current workspace?&lt;/p&gt;&#xA;" OwnerUserId="2424" LastEditorUserId="2424" LastEditDate="2015-10-03T17:43:19.680" LastActivityDate="2015-10-06T16:51:37.470" Title="vista multitasking dual monitor" Tags="|multitasking-view|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2109" PostTypeId="2" ParentId="2082" CreationDate="2015-09-22T00:45:26.057" Score="2" Body="&lt;p&gt;A way to do this is adding the specific MIME type to the &lt;em&gt;.desktop&lt;/em&gt; file you use to launch a application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created this file &lt;code&gt;~/.local/share/applications/vscode.desktop&lt;/code&gt; to launch VSCode from Slingshot. If I want it to open a .vala file from Files, I have to add &quot;MimeType=text/vala&quot; to the &quot;vscode.desktop&quot; and it will appear in the &quot;Open with...&quot; menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a nice GUI for managing .desktop files called MenuLibre. You can install it from Software Center or &lt;code&gt;sudo apt-get install menulibre&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example of a .desktop file: &lt;a href=&quot;http://standards.freedesktop.org/desktop-entry-spec/latest/apa.html&quot; rel=&quot;nofollow&quot;&gt;http://standards.freedesktop.org/desktop-entry-spec/latest/apa.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-09-22T00:45:26.057" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2110" PostTypeId="2" ParentId="2107" CreationDate="2015-09-22T01:13:46.327" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya has a known UEFI bug. You can find details here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;Here is a sister thread that walks through the fix.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need anything explained and I will try my best to expound on their solution.&lt;/p&gt;&#xA;" OwnerUserId="2361" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-09-22T01:13:46.327" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2111" PostTypeId="1" CreationDate="2015-09-22T03:10:07.657" Score="2" ViewCount="256" Body="&lt;p&gt;Using an Asus router to share a USB Samsung printer. The Print Server uses LPR and some Queue name. I can get this to work easily in Windows and PCBSD (FreeBSD), but Elementary OS it just sits there not detecting anything. With the other OS's, I had options to select which protocols to use, but Elemenary has nothing but some search bar. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried searching but no results showed, except for Ubuntu and the screens look different... So here I am. Thank You in advance&lt;/p&gt;&#xA;" OwnerUserId="2487" LastActivityDate="2015-10-07T17:51:48.340" Title="How to setup an LPR printer?" Tags="|release-freya|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2112" PostTypeId="2" ParentId="2093" CreationDate="2015-09-22T05:17:10.397" Score="1" Body="&lt;p&gt;You can make the panel shorter by editing your system's stylesheet. If you haven't modified your system, the file you want to edit is &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt;. You can adjust the height of the panel by reducing the padding in the selector &lt;code&gt;.composited-indicator&lt;/code&gt;. The current version of the stylesheet doesn't style &lt;code&gt;.composited-indicator&lt;/code&gt; directly, so you'll have to add a line for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;.composited-indicator&lt;/code&gt; is a Gtk.MenuItem so it inherits all the style properties defined in &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&lt;/code&gt; under the selector &lt;code&gt;.menu .menuitem&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2382" LastActivityDate="2015-09-22T05:17:10.397" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2115" PostTypeId="1" AcceptedAnswerId="2121" CreationDate="2015-09-22T14:40:25.287" Score="2" ViewCount="3034" Body="&lt;p&gt;I installed elementary OS Freya (in Polish), fully updated it and then used the language plug to fully install Polish language. I might've accidentaly changed language to English. Then I log out, logged in and elementary OS asked me if I want to change the default folder names to the new language. I pressed &quot;Yes&quot; and... &quot;Don't ask me again&quot;. Then I noticed what I have done: I changed my Polish named folders like &quot;Pobrane&quot; to English ones: &quot;Downloads&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed the language back to Polish but I didn't get asked about the folders this time. So I'm stuck with Polish language with English folders which means that for example: Midori can't download files. As it tries to download them to folders that don't exist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to force elementary OS to change the folders again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to do it manually but if I change the names they lose their nice folder icons and they are removed from the favorites menu in Files. I attached a screenshot. You can take a look at &quot;Documents&quot; vs &quot;Dokumenty&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sojW0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sojW0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2017-10-04T20:27:34.463" Title="Change language of home folders" Tags="|files|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2116" PostTypeId="2" ParentId="2087" CreationDate="2015-09-22T14:43:34.213" Score="1" Body="&lt;p&gt;I thought the same and apparently is because you are trying to install EFI and UEFI, test mode (if your BIOS permits) in LEGACY mode.&#xA;Luck!&lt;/p&gt;&#xA;" OwnerUserId="2492" LastActivityDate="2015-09-22T14:43:34.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2117" PostTypeId="2" ParentId="2084" CreationDate="2015-09-22T15:29:33.043" Score="1" Body="&lt;p&gt;It could be a kernel issue. When Freya 0.3.1 was released, I did a fresh install, and I had the issue you describe. Going back to kernel 3.16.0-34-generic fixed the problem. I've noticed this issue with other Linux distributions that use versions higher than 3.16. This could be an issue with newer kernel versions, or just a quirk with my particular laptop.&lt;/p&gt;&#xA;" OwnerUserId="70" LastActivityDate="2015-09-22T15:29:33.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2119" PostTypeId="2" ParentId="2100" CreationDate="2015-09-22T18:41:34.830" Score="2" Body="&lt;p&gt;I managed to find a solution for this. Just power off the computer completely and restart it. Sound back to normal!&lt;/p&gt;&#xA;" OwnerUserId="2356" LastActivityDate="2015-09-22T18:41:34.830" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2120" PostTypeId="1" CreationDate="2015-09-22T19:20:55.223" Score="1" ViewCount="428" Body="&lt;p&gt;After installing ubuntu tweaks toll task bar and dock is not showing. How to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LeEjo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LeEjo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2495" LastActivityDate="2015-09-22T19:20:55.223" Title="Task Bar and Dock Bar is not showing" Tags="|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2121" PostTypeId="2" ParentId="2115" CreationDate="2015-09-22T20:00:19.443" Score="5" Body="&lt;p&gt;Take a look in the following files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;~/.config/user-dirs.dirs&lt;/li&gt;&#xA;&lt;li&gt;~/.config/user-dirs.locale&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This files are created by the xdg-user-dir tool. The .dirs file have the actual names of the default user folders, and the .locale file keeps the language they are set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't find the .locales file, you've likely checked &quot;don't ask to change the names again&quot; in the dialog after change to English. This deletes the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have 3 choices:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the names directly in the &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt;;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a &lt;code&gt;~/.config/user-dirs.locale&lt;/code&gt; file with your language code (&lt;code&gt;pl&lt;/code&gt; or &lt;code&gt;pol&lt;/code&gt;, right?) and change the language settings again. This should ask you again about the folders translation;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;xdg-user-dirs-update --set DIR path&lt;/code&gt; to set the folders name. Read &lt;code&gt;man xdg-user-dirs-update&lt;/code&gt; for details.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-09-22T20:00:19.443" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2122" PostTypeId="1" CreationDate="2015-09-22T20:48:26.803" Score="0" ViewCount="173" Body="&lt;p&gt;When I run a simple bash statement I get extra characters in the redirect of that statement. Example, if I run &lt;code&gt;for i in 12345 abcd 7890; do echo $i ; done &amp;gt; test.txt&lt;/code&gt; and then do a &lt;code&gt;cat -A test.txt&lt;/code&gt; this is contents.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat -A test.txt&#xA;^[]0;for i in 12345 abcd 7890^G12345$&#xA;abcd$&#xA;7890$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Why am I getting the &lt;code&gt;^[]0;for i in 12345 abcd 7890^G&lt;/code&gt; and &lt;code&gt;$&lt;/code&gt; added to the output. I tested this on a &lt;em&gt;clean install&lt;/em&gt; of the latest build.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my &lt;code&gt;.bashrc&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.bashrc: executed by bash(1) for non-login shells.&#xA;# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)&#xA;# for examples&#xA;# We use preexec and precmd hook functions for Bash&#xA;# If you have anything that's using the Debug Trap or PROMPT_COMMAND &#xA;# change it to use preexec or precmd&#xA;# See also https://github.com/rcaloras/bash-preexec&#xA;&#xA;# If not running interactively, don't do anything&#xA;case $- in&#xA;    *i*) ;;&#xA;      *) return;;&#xA;esac&#xA;&#xA;# don't put duplicate lines or lines starting with space in the history.&#xA;# See bash(1) for more options&#xA;HISTCONTROL=ignoreboth&#xA;&#xA;# append to the history file, don't overwrite it&#xA;shopt -s histappend&#xA;&#xA;# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)&#xA;HISTSIZE=100000&#xA;HISTFILESIZE=200000&#xA;&#xA;# check the window size after each command and, if necessary,&#xA;# update the values of LINES and COLUMNS.&#xA;shopt -s checkwinsize&#xA;&#xA;# If set, the pattern &quot;**&quot; used in a pathname expansion context will&#xA;# match all files and zero or more directories and subdirectories.&#xA;#shopt -s globstar&#xA;&#xA;# make less more friendly for non-text input files, see lesspipe(1)&#xA;[ -x /usr/bin/lesspipe ] &amp;amp;&amp;amp; eval &quot;$(SHELL=/bin/sh lesspipe)&quot;&#xA;&#xA;# set variable identifying the chroot you work in (used in the prompt below)&#xA;if [ -z &quot;${debian_chroot:-}&quot; ] &amp;amp;&amp;amp; [ -r /etc/debian_chroot ]; then&#xA;    debian_chroot=$(cat /etc/debian_chroot)&#xA;fi&#xA;&#xA;# set a fancy prompt (non-color, unless we know we &quot;want&quot; color)&#xA;case &quot;$TERM&quot; in&#xA;    xterm-color) color_prompt=yes;;&#xA;esac&#xA;&#xA;# uncomment for a colored prompt, if the terminal has the capability; turned&#xA;# off by default to not distract the user: the focus in a terminal window&#xA;# should be on the output of commands, not on the prompt&#xA;#force_color_prompt=yes&#xA;&#xA;if [ -n &quot;$force_color_prompt&quot; ]; then&#xA;    if [ -x /usr/bin/tput ] &amp;amp;&amp;amp; tput setaf 1 &amp;gt;&amp;amp;/dev/null; then&#xA;    # We have color support; assume it's compliant with Ecma-48&#xA;    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such&#xA;    # a case would tend to support setf rather than setaf.)&#xA;    color_prompt=yes&#xA;    else&#xA;    color_prompt=&#xA;    fi&#xA;fi&#xA;&#xA;if [ &quot;$color_prompt&quot; = yes ]; then&#xA;    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '&#xA;else&#xA;    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '&#xA;fi&#xA;unset color_prompt force_color_prompt&#xA;&#xA;# enable color support of ls and also add handy aliases&#xA;if [ -x /usr/bin/dircolors ]; then&#xA;    test -r ~/.dircolors &amp;amp;&amp;amp; eval &quot;$(dircolors -b ~/.dircolors)&quot; || eval &quot;$(dircolors -b)&quot;&#xA;    alias ls='ls --color=auto'&#xA;    #alias dir='dir --color=auto'&#xA;    #alias vdir='vdir --color=auto'&#xA;&#xA;    alias grep='grep --color=auto'&#xA;    alias fgrep='fgrep --color=auto'&#xA;    alias egrep='egrep --color=auto'&#xA;fi&#xA;&#xA;# some more ls aliases&#xA;alias ll='ls -alF'&#xA;alias la='ls -A'&#xA;alias l='ls -CF'&#xA;&#xA;# Add an &quot;alert&quot; alias for long running commands.  Use like so:&#xA;#   sleep 10; alert&#xA;alias alert='notify-send --urgency=low -i &quot;$([ $? = 0 ] &amp;amp;&amp;amp; echo terminal || echo error)&quot; &quot;$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&amp;amp;|]\s*alert$//'\'')&quot;'&#xA;&#xA;# Alias definitions.&#xA;# You may want to put all your additions into a separate file like&#xA;# ~/.bash_aliases, instead of adding them here directly.&#xA;# See /usr/share/doc/bash-doc/examples in the bash-doc package.&#xA;&#xA;if [ -f ~/.bash_aliases ]; then&#xA;    . ~/.bash_aliases&#xA;fi&#xA;&#xA;# enable programmable completion features (you don't need to enable&#xA;# this, if it's already enabled in /etc/bash.bashrc and /etc/profile&#xA;# sources /etc/bash.bashrc).&#xA;if ! shopt -oq posix; then&#xA;  if [ -f /usr/share/bash-completion/bash_completion ]; then&#xA;    . /usr/share/bash-completion/bash_completion&#xA;  elif [ -f /etc/bash_completion ]; then&#xA;    . /etc/bash_completion&#xA;  fi&#xA;fi&#xA;&#xA;# If this is an xterm set more declarative titles &#xA;# &quot;dir: last_cmd&quot; and &quot;actual_cmd&quot; during execution&#xA;# If you want to exclude a cmd from being printed see line 156&#xA;case &quot;$TERM&quot; in&#xA;xterm*|rxvt*)&#xA;    PS1=&quot;\[\e]0;${debian_chroot:+($debian_chroot)}\$(print_title)\a\]$PS1&quot;&#xA;    __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;    print_title () &#xA;    {&#xA;        __el_FIRSTPART=&quot;&quot;&#xA;        __el_SECONDPART=&quot;&quot;&#xA;        if [ &quot;$PWD&quot; == &quot;$HOME&quot; ]; then&#xA;            __el_FIRSTPART=$(gettext --domain=&quot;pantheon-files&quot; &quot;Home&quot;)&#xA;        else&#xA;            if [ &quot;$PWD&quot; == &quot;/&quot; ]; then&#xA;                __el_FIRSTPART=&quot;/&quot;&#xA;            else&#xA;                __el_FIRSTPART=&quot;${PWD##*/}&quot;&#xA;            fi&#xA;        fi&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == &quot;&quot; ]]; then&#xA;            echo &quot;$__el_FIRSTPART&quot;&#xA;            return&#xA;        fi&#xA;        #trim the command to the first segment and strip sudo&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == sudo* ]]; then&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND:5}&quot;&#xA;            __el_SECONDPART=&quot;${__el_SECONDPART%% *}&quot;&#xA;        else&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND%% *}&quot;&#xA;        fi &#xA;        printf &quot;%s: %s&quot; &quot;$__el_FIRSTPART&quot; &quot;$__el_SECONDPART&quot;&#xA;    }&#xA;    put_title()&#xA;    {&#xA;        __el_LAST_EXECUTED_COMMAND=&quot;${BASH_COMMAND}&quot;&#xA;        printf &quot;\033]0;%s\007&quot; &quot;$1&quot;&#xA;    }&#xA;&#xA;    # Show the currently running command in the terminal title:&#xA;    # http://www.davidpashley.com/articles/xterm-titles-with-bash.html&#xA;    update_tab_command()&#xA;    {&#xA;        # catch blacklisted commands and nested escapes&#xA;        case &quot;$BASH_COMMAND&quot; in &#xA;            *\033]0*|update_*|echo*|printf*|clear*|cd*)&#xA;            __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;                ;;&#xA;            *)&#xA;            put_title &quot;${BASH_COMMAND}&quot;&#xA;            ;;&#xA;        esac&#xA;    }&#xA;    preexec_functions+=(update_tab_command)&#xA;    ;;&#xA;*)&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2497" LastEditorUserId="16827" LastEditDate="2019-04-14T05:41:35.660" LastActivityDate="2019-04-14T05:41:35.660" Title="Odd characters added to redirect command" Tags="|command-line|bash|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2123" PostTypeId="1" CreationDate="2015-09-22T21:38:44.023" Score="2" ViewCount="121" Body="&lt;p&gt;I have downloaded the Freya version, burnt it into a DVD then i have booted with the DVD, after loading the welcome screen opens but the problem is the resolution is not correct, everything out there is so big that 80% of the contents doesn't fit into my screen. And that's the reason why i cant proceed further.&lt;/p&gt;&#xA;" OwnerUserId="2499" LastActivityDate="2015-09-22T21:38:44.023" Title="Elementary OS installation time resolution problem" Tags="|resolution|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2124" PostTypeId="1" AcceptedAnswerId="3879" CreationDate="2015-09-22T22:02:28.730" Score="1" ViewCount="793" Body="&lt;p&gt;I would like to change the login screen keyboard to dvorak-fr but I can't find a way and the keyboard for login is in qwerty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard indicator in Greeter say &quot;No other layout available&quot; and tty1 is in dvorak-fr as expected (as well as my session once I am logged).&lt;/p&gt;&#xA;" OwnerUserId="2500" LastEditorUserId="2500" LastEditDate="2015-10-04T20:03:11.147" LastActivityDate="2016-01-07T14:43:43.990" Title="How can I change the Login Screen Keyboard to Dvorak-fr" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2125" PostTypeId="1" CreationDate="2015-09-23T01:27:00.057" Score="1" ViewCount="319" Body="&lt;p&gt;I have elementary OS (Freya) installed on my system, as the only OS, but now I will like to also install Windows 10 and make the system dual boot, I do not want to loose my files or settings on the elementary OS. I have searched online on how to do this, but most of the tutorials goes from Windows to elementary OS, what I want is the other way round.&lt;/p&gt;&#xA;" OwnerUserId="2503" LastEditorUserId="16827" LastEditDate="2019-04-13T13:28:40.820" LastActivityDate="2019-04-13T13:28:40.820" Title="Dual Boot Windows 10 with elementary OS" Tags="|release-freya|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="2126" PostTypeId="2" ParentId="2125" CreationDate="2015-09-23T06:11:07.140" Score="2" Body="&lt;p&gt;Read this post here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/6317/how-can-i-install-windows-after-ive-installed-ubuntu&quot;&gt;install windows after installing ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This post has good explained answers on how to solve your problem. These answers will also work for elementary as both uses GRUB.&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-23T06:11:07.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2127" PostTypeId="1" AcceptedAnswerId="2128" CreationDate="2015-09-23T08:35:25.843" Score="3" ViewCount="668" Body="&lt;p&gt;I'm using firefox from this ppa:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~mozillateam/+archive/ubuntu/firefox-next&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~mozillateam/+archive/ubuntu/firefox-next&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just today I got Firefox 42 beta, which is the first version linked to GTK3 instead of GTK2. The problem is the Window-Titlebar of the browser is totally misplaced: it's located in the same height as the adressbar of fiefox, slightly shifted to the right, making firefox unusable. A fresh firefox userprofile did not solve the problems. What should i do else than downgrading ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6nSRn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6nSRn.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2504" LastEditorUserId="888" LastEditDate="2015-09-24T02:04:04.630" LastActivityDate="2015-09-24T17:26:54.607" Title="Firefox GTK3 build(s) not usable/working" Tags="|release-freya|window-management|firefox|" AnswerCount="2" CommentCount="3" ClosedDate="2015-09-24T21:08:27.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="2128" PostTypeId="2" ParentId="2127" CreationDate="2015-09-23T11:43:55.870" Score="3" Body="&lt;p&gt;The solution is to install &lt;strong&gt;gtk3-nocsd&lt;/strong&gt; package and to preload the small library provided by it by adding something like: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env LD_PRELOAD=/usr/lib/gtk3-nocsd/gtk3-nocsd.so &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in front of the command line launching your firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The package is found in &lt;a href=&quot;https://launchpad.net/~nilarimogard/+archive/ubuntu/webupd8&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More details &lt;a href=&quot;http://www.webupd8.org/2014/08/how-to-disable-gtk3-client-side.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My own configuration for Firefox looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rEuay.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rEuay.png&quot; alt=&quot;My Firefox command line&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Edited&lt;/em&gt;&#xA;A quicker way, without installing a package is to pass in the command line the option &lt;code&gt;GTK_CSD=0&lt;/code&gt; which is supposed to have the same effect (thanks to @augenleet I found the information in this &lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1195002&quot; rel=&quot;nofollow noreferrer&quot;&gt;Mozilla ticket&lt;/a&gt;). However, the &quot;white text&quot; issue still remains, though.&lt;/p&gt;&#xA;" OwnerUserId="888" LastEditorUserId="888" LastEditDate="2015-09-24T17:26:54.607" LastActivityDate="2015-09-24T17:26:54.607" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2129" PostTypeId="1" CreationDate="2015-09-23T13:11:32.163" Score="0" ViewCount="181" Body="&lt;p&gt;How can I download movies or other software from the internet on elementary? When i try to download it downloads a small file (my download manager is flareget) and then i click on it and... nothing.&lt;/p&gt;&#xA;" OwnerUserId="2505" LastEditorUserId="26" LastEditDate="2015-09-24T20:54:41.887" LastActivityDate="2015-09-26T14:25:35.510" Title="How to download movies or software?" Tags="|release-freya|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2130" PostTypeId="1" AcceptedAnswerId="2137" CreationDate="2015-09-23T13:57:21.353" Score="4" ViewCount="110" Body="&lt;p&gt;I know i have to use &lt;code&gt;Granite.Widgets.AboutDialog&lt;/code&gt; but how do i create it so it looks exactly like the Noise about dialog?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't find how the About dialogue is created in Noise source code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help/pointers welcome.&lt;/p&gt;&#xA;" OwnerUserId="2507" LastActivityDate="2016-08-08T08:53:35.450" Title="Creating the &quot;About&quot; dialog" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2132" PostTypeId="1" AcceptedAnswerId="2136" CreationDate="2015-09-23T14:09:47.500" Score="2" ViewCount="100" Body="&lt;p&gt;If i have Noise or Terminal in the dock and right click on the app icon in the dock it presents me with a bunch of options eg. &quot;Open as Root&quot;, &quot;About&quot; etc etc. How do i do this for my app?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm developing an app for elementary and wanted to add some custom actions for my app so how do i do this?&lt;/p&gt;&#xA;" OwnerUserId="2507" LastActivityDate="2015-09-23T14:50:28.327" Title="Adding &quot;quicklist&quot; actions to apps in the dock" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2133" PostTypeId="1" AcceptedAnswerId="2135" CreationDate="2015-09-23T14:27:06.600" Score="12" ViewCount="16483" Body="&lt;p&gt;Is there a way to modify (remove/add) applications in the slingshot launcher of elementary OS (Freya)? It seems to be easy enough to do so for applications in the Dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="747" LastEditorUserId="45" LastEditDate="2015-09-23T22:34:41.113" LastActivityDate="2017-08-21T08:53:00.313" Title="Is there a way to remove/add applications from/to the slingshot launcher of elementary OS?" Tags="|slingshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2134" PostTypeId="2" ParentId="2133" CreationDate="2015-09-23T14:46:12.067" Score="2" Body="&lt;p&gt;You can install a menu editor like &lt;code&gt;alacarte&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install alacarte&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With it you can add/remove/move menu entries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there is this bugreport about removing&#xA;&lt;a href=&quot;https://bugs.launchpad.net/slingshot/+bug/1211570&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/slingshot/+bug/1211570&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure what you want to add...&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-09-23T14:46:12.067" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2135" PostTypeId="2" ParentId="2133" CreationDate="2015-09-23T14:49:20.497" Score="16" Body="&lt;p&gt;There is now a new application available in AppCenter called: &lt;strong&gt;AppEditor&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://appcenter.elementary.io/badge.svg&quot; alt=&quot;Get it on AppCenter&quot;&gt;&lt;/a&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/cwBIZ.png&quot; alt=&quot;AppEditor&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Yes. You can use &lt;a href=&quot;https://smdavis.us/projects/menulibre/&quot; rel=&quot;noreferrer&quot;&gt;MenuLibre&lt;/a&gt; for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just search for the App you want to remove and click on &quot;Hide in menu&quot; and than the save button (with arrow down).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WocDt.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WocDt.png&quot; alt=&quot;MenuLibre Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="227" LastEditDate="2017-08-21T08:53:00.313" LastActivityDate="2017-08-21T08:53:00.313" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2136" PostTypeId="2" ParentId="2132" CreationDate="2015-09-23T14:50:28.327" Score="2" Body="&lt;p&gt;Just add at the end of the .desktop file something like&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Desktop Action Screen]&#xA;Name=Take a Screenshot of the Whole Screen&#xA;Exec=gnome-screenshot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See this for more information&#xA;&lt;a href=&quot;https://wiki.ubuntu.com/Unity/LauncherAPI#Quicklists&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/Unity/LauncherAPI#Quicklists&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-09-23T14:50:28.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2137" PostTypeId="2" ParentId="2130" CreationDate="2015-09-23T14:56:46.880" Score="5" Body="&lt;p&gt;The about dialog is part of granite&#xA;&lt;a href=&quot;http://valadoc.org/#!api=granite/Granite.Widgets.AboutDialog&quot; rel=&quot;nofollow&quot;&gt;http://valadoc.org/#!api=granite/Granite.Widgets.AboutDialog&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The content is filled in the class that is subclassing &lt;code&gt;Granite.Application&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/noise/freya/view/head:/src/Noise.vala&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-apps/noise/freya/view/head:/src/Noise.vala&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then the about dialog can be launched with &lt;code&gt;&quot;name of you binary&quot; --about&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/noise/freya/view/head:/data/noise.desktop&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-apps/noise/freya/view/head:/data/noise.desktop&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2016-08-08T08:53:35.450" LastActivityDate="2016-08-08T08:53:35.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2138" PostTypeId="2" ParentId="2129" CreationDate="2015-09-23T16:07:45.973" Score="-2" Body="&lt;p&gt;How about you try out online services like google movies? There you can build up an online library with legal movies and stream them to all your devices. Be it smartphone, tablet or desktop.&lt;/p&gt;&#xA;" OwnerUserId="2485" LastActivityDate="2015-09-23T16:07:45.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2139" PostTypeId="1" CreationDate="2015-09-23T16:25:47.423" Score="2" ViewCount="117" Body="&lt;p&gt;my problem is that after boot hardly anything in the OS works. I can open applications but I cant do anything with them, they simply don't respond.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found that after I press power button(hibernate) and then again(wake), the system starts working absolutely perfectly. But hibernating and waking my PC after every boot is pretty annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has any idea how to solve this?&lt;/p&gt;&#xA;" OwnerUserId="2508" LastEditorUserId="3757" LastEditDate="2016-05-05T07:08:52.773" LastActivityDate="2016-05-05T07:08:52.773" Title="elementary OS does not respond after boot" Tags="|boot|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2140" PostTypeId="1" AcceptedAnswerId="2540" CreationDate="2015-09-23T21:52:44.493" Score="1" ViewCount="2988" Body="&lt;p&gt;I'm using Freya for developing web apps in Ruby on Rails with MySQL and PostgreSQL.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is when I install the MySQL Workbench: when I try to perform a query the result is a blank grid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Emma for querying (because the console is useful for basic queries but not for complex work)&lt;/p&gt;&#xA;" OwnerUserId="2512" LastEditorUserId="45" LastEditDate="2015-12-03T00:43:16.710" LastActivityDate="2015-12-03T00:43:16.710" Title="MySQL Workbench" Tags="|release-freya|software-installation|web-development|" AnswerCount="2" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2141" PostTypeId="1" CreationDate="2015-09-24T02:05:28.263" Score="2" ViewCount="180" Body="&lt;p&gt;I have a Samsung laptop with an SSD (24GB) and an HDD (500GB). First, I installed windows 10 on the SSD, no problem so far. Then I installed latest build of elementary OS Freya on HDD but when I try to boot there's a GRUB issue. GRUB is on SSD (Even though I made a boot partition on the HDD) while the rest of the OS is in the HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this is the UEFI bug that people have been talking about, tho.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastEditorUserId="34" LastEditDate="2015-10-08T16:25:44.320" LastActivityDate="2015-12-09T13:18:10.753" Title="GRUB on SSD while elementary OS is on HDD" Tags="|release-freya|grub|uefi|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2144" PostTypeId="2" ParentId="2140" CreationDate="2015-09-24T07:03:44.467" Score="3" Body="&lt;p&gt;I had a similar problem. Please try to install the latest version from the official website: &lt;a href=&quot;http://dev.mysql.com/get/Downloads/MySQLGUITools/mysql-workbench-community-6.3.5-1ubu1404-amd64.deb&quot; rel=&quot;nofollow&quot;&gt;http://dev.mysql.com/get/Downloads/MySQLGUITools/mysql-workbench-community-6.3.5-1ubu1404-amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="596" LastEditorUserId="596" LastEditDate="2015-12-02T15:20:57.923" LastActivityDate="2015-12-02T15:20:57.923" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2145" PostTypeId="2" ParentId="1548" CreationDate="2015-09-24T07:52:48.227" Score="1" Body="&lt;p&gt;I had similar issue. My system was freezing at shutdown and boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;what i did to solve issue-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edited /etc/default/grub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updated grub afterward with sudo update-grub at the command line.&lt;/p&gt;&#xA;" OwnerUserId="2422" LastActivityDate="2015-09-24T07:52:48.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2146" PostTypeId="1" CreationDate="2015-09-24T08:43:31.280" Score="1" ViewCount="13277" Body="&lt;p&gt;I was installing &lt;strong&gt;Google Chrome&lt;/strong&gt; on my elementary OS from installer and due to unmet dependencies i run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Don't know what happened i just it was saying &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;removing Pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and as a result now i am not able to use elementary OS.&#xA;As every time i start elementary OSit shows &lt;code&gt;login screen&lt;/code&gt; but after logged in it just &lt;code&gt;hanged&lt;/code&gt; nothing showing only &lt;code&gt;wallpaper&lt;/code&gt; of login screen!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No i am totally stuck i read somewhere that i should create a live CD on USB then bootup with USB and try to install it again then installer will show &lt;code&gt;repair&lt;/code&gt; option!&#xA;i tried it but repair option is not showing!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now i am very dishearted dont know how to get back my elementary OS or i will have to remove it and then reinstall it?? kindly if its possible to repair elementary OS.&#xA;Thanks a lot!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed elementary OS with &lt;strong&gt;Windows 7&lt;/strong&gt; dual boot!&lt;/p&gt;&#xA;" OwnerUserId="2516" LastEditorUserId="3757" LastEditDate="2016-05-05T09:05:19.780" LastActivityDate="2020-02-01T10:22:14.667" Title="How to repair elementary OS?" Tags="|boot|dual-boot|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2147" PostTypeId="2" ParentId="2146" CreationDate="2015-09-24T10:01:48.050" Score="3" Body="&lt;p&gt;It seems like you unistalled parts of your desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt; should do the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW you can install chromium from the official repositories.&lt;/p&gt;&#xA;" OwnerUserId="169" LastActivityDate="2015-09-24T10:01:48.050" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2148" PostTypeId="2" ParentId="2086" CreationDate="2015-09-24T10:24:16.627" Score="0" Body="&lt;p&gt;I had the same laptop and I tried to make it work with Ubuntu back then, but I guess your case is very similar.&#xA;AFAIK there is no way to get automated graphics switching to work as it is an Apple-designed hardware-based graphics switching solution which differs greatly from Nvidia's Optimus (that means &lt;code&gt;bumblebee&lt;/code&gt; won't work).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I essentially boils down to two choices:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Leave your setup as is (intel driver)&lt;/li&gt;&#xA;&lt;li&gt;Boot in non-EFI mode so that the MBP EFI will automatically switch to the Nvidia card (you won´t be able to use the power-efficient intel card that way untill reboot) by following the answer I outlined &lt;a href=&quot;https://askubuntu.com/questions/340899/mac-book-pro-6-2-nvidia-graphics-suspend-dont-work&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="169" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-24T10:24:16.627" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2149" PostTypeId="1" CreationDate="2015-09-24T11:05:55.627" Score="1" ViewCount="1853" Body="&lt;p&gt;I tried a lot of commands to remove firefox, but when I install again, profiles continue on computer, but the problem aren't the profiles, the problem is some rendering problems, I can't see the link I'm surfing and I can't see tabs either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried: &lt;code&gt;sudo apt-get purge firefox-trunk&lt;/code&gt; and &lt;code&gt;sudo apt-get --purge autoremove firefox&lt;/code&gt; but it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Afud0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Afud0.png&quot; alt=&quot;Firefox nightly issues&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2518" LastEditorDisplayName="user2688" LastEditDate="2015-10-08T14:20:03.017" LastActivityDate="2015-10-08T14:20:03.017" Title="Full uninstall firefox nightly" Tags="|ubuntu|firefox|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2150" PostTypeId="2" ParentId="1062" CreationDate="2015-09-24T11:08:34.973" Score="0" Body="&lt;p&gt;The SUPER key plus any number key works for me on Luna. However, a second workspace needs to have an application open before a third becomes possible. The SUPER key plus down arrow reveals all open workspaces at the bottom of the screen, allowing one to choose between them with a mouse click if desired.&lt;/p&gt;&#xA;" OwnerUserId="2519" LastActivityDate="2015-09-24T11:08:34.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2152" PostTypeId="2" ParentId="2127" CreationDate="2015-09-24T14:53:16.927" Score="1" Body="&lt;p&gt;This bug is currently tracked here:&#xA;&lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1195002&quot; rel=&quot;nofollow&quot;&gt;https://bugzilla.mozilla.org/show_bug.cgi?id=1195002&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Until it is fixed, you can use the following workaround. Simply start Firefox in the terminal with &quot;GTK_CSD=0&quot; ahead:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=0 firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="363" LastActivityDate="2015-09-24T14:53:16.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2154" PostTypeId="1" CreationDate="2015-09-24T19:29:05.000" Score="1" ViewCount="81" Body="&lt;p&gt;Why do some built-in apps have a non-working help menu? It shows nothing when I push on it. In Ubuntu (yelp), gnome help manager works, but in elementary OS Freya it doesn't. Why?&lt;/p&gt;&#xA;" OwnerUserId="2525" LastEditorUserId="5565" LastEditDate="2016-10-07T02:32:48.457" LastActivityDate="2016-10-07T02:32:48.457" Title="How to make work Yelp (Gnome Help)?" Tags="|release-freya|design|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2155" PostTypeId="1" CreationDate="2015-09-24T19:45:38.103" Score="0" ViewCount="12" Body="&lt;p&gt;After the system is installed in the BIOS at all lost all the disks. And sometimes they are, but during the boot black screen and the words grub. How to fix it? Can'T install. New laptop i7, 12 RAM&lt;/p&gt;&#xA;" OwnerUserId="2527" LastActivityDate="2015-09-24T19:45:38.103" Title="during the boot black screen and the words grub" Tags="|grub|" AnswerCount="0" CommentCount="3" ClosedDate="2015-09-24T21:24:00.250" ContentLicense="CC BY-SA 3.0" />
  <row Id="2157" PostTypeId="2" ParentId="2129" CreationDate="2015-09-24T20:57:38.850" Score="1" Body="&lt;p&gt;&lt;strong&gt;Uninstall flareget.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may seem a little hard, but if you're using a third-party download manager and you're having issues downloading things, it's probably the download managers fault. Instead, try using the downloader that comes integrated into your browser of choice.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-24T20:57:38.850" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2159" PostTypeId="1" CreationDate="2015-09-25T06:01:10.190" Score="-2" ViewCount="2015" Body="&lt;p&gt;It does not work for me, on three machines (see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1972/files-gof-directory-async-vala471-listing-directory-error/2051#2051&quot;&gt;this other question&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I am curious to know whether this is a general Freya bug, or did someone manage to get it working, or that might be due to the collection of software I use ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;L@u&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-19T21:47:38.783" Title="Can anyone access an FTP Server using Pantheon Files?" Tags="|pantheon-files|" AnswerCount="3" CommentCount="1" ClosedDate="2017-01-22T23:34:34.083" ContentLicense="CC BY-SA 3.0" />
  <row Id="2160" PostTypeId="2" ParentId="1600" CreationDate="2015-09-25T10:12:36.187" Score="2" Body="&lt;p&gt;Unfortunately elementary OS doesn't povide an UI to change this kind of options directly.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install and run &lt;code&gt;dconf-editor&lt;/code&gt; from the official repositories, navigate to &lt;em&gt;org -&gt; gnome -&gt; desktop -&gt; media-handling&lt;/em&gt;. Disable the options &lt;em&gt;automount-open&lt;/em&gt; and &lt;em&gt;automount&lt;/em&gt;, that should do the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w3ARt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w3ARt.png&quot; alt=&quot;dconf-edit&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-09-25T10:12:36.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2161" PostTypeId="1" CreationDate="2015-09-25T11:24:43.517" Score="2" ViewCount="137" Body="&lt;p&gt;My version is Freya, and I chose encryption of my harddisk at the installation. &#xA;The whole HDD is used with one root partition and one swap partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first time it asks for password is just after running BIOS:&#xA;&quot;Unlocking the disk /dev/disk/by-uuid/...{a very long number comes here}....(sdb5_crypt)&quot;  &quot;Enter passphrase:______________________&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The secong time is at the welcome screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Security &amp;amp; Privacy settings I have disabled both locking options.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is there any way to automatically pass at least the first login, maybe both?&lt;/li&gt;&#xA;&lt;li&gt;What happens if I choose Delete of the login password in the keyring manager?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks, Børge&lt;/p&gt;&#xA;" OwnerUserId="2531" LastActivityDate="2015-09-26T21:24:53.653" Title="Two times password required for booting" Tags="|greeter|security|keyring|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2162" PostTypeId="1" CreationDate="2015-09-25T13:01:36.827" Score="6" ViewCount="4394" Body="&lt;p&gt;Many times my network adapter just stops working, the only option is to reboot anyway.Is there a way to reset network adapter in a session so I won't have to reboot my computer many times?&lt;/p&gt;&#xA;" OwnerUserId="523" LastEditorUserId="2460" LastEditDate="2015-09-28T16:12:10.933" LastActivityDate="2019-12-15T16:47:24.857" Title="How can I reset my network adapter?" Tags="|wifi|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2163" PostTypeId="1" CreationDate="2015-09-25T13:46:34.313" Score="1" ViewCount="104" Body="&lt;p&gt;So foolishly I fully installed elementary OS over Ubuntu earlier from USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The install crashed, and the dialogue box telling me this wouldn't close. I could only get rid of this by unplugging the computer from power.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I power my computer on I get the usual grub menu asking if I would like to try elementary or install etc. but whichever option I choose I just get a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way out of this hole I've dug for myself?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should also mention that the computer is an old iMac.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help that will stop me getting fired will be hugely appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2535" LastActivityDate="2016-09-15T06:09:49.300" Title="Locked out of computer since install crashed" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2164" PostTypeId="2" ParentId="2162" CreationDate="2015-09-25T15:14:27.287" Score="3" Body="&lt;p&gt;There is an answer that may work for you:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you really want to reset the network adapter you usually need to&#xA;  unload and reload the kernel module that it uses.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If you just want to reconfigure it you can usually do:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo /etc/init.d/network-manager restart&lt;/code&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;But if you just want a new&#xA;  dhcp lease (that's the technical name for obtain a new IP from the&#xA;  router), you just need to use:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo dhclient -v eth1&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/54710/how-do-i-reset-the-network-adapter-using-a-terminal-command&quot;&gt;https://askubuntu.com/questions/54710/how-do-i-reset-the-network-adapter-using-a-terminal-command&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2460" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-09-25T15:14:27.287" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2165" PostTypeId="2" ParentId="1856" CreationDate="2015-09-25T18:08:38.210" Score="2" Body="&lt;p&gt;For me, the culprit was gstreamer1.0-clutter.&#xA;Installing Totem with its dependencies fixed my problem and by uninstalling package with package, I came to gstreamer1.0-clutter.﻿&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps ...&lt;/p&gt;&#xA;" OwnerUserId="2539" LastActivityDate="2015-09-25T18:08:38.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2167" PostTypeId="1" AcceptedAnswerId="2171" CreationDate="2015-09-26T06:05:19.877" Score="0" ViewCount="2602" Body="&lt;p&gt;I tried to delete my partitions of Ubuntu to Dual boot elementary, and now I can only access Windows with &lt;kbd&gt;F12&lt;/kbd&gt;.&#xA;If I let it boot, it says &quot;minimal bash like script...&quot;.&#xA;In my boot entries on &lt;kbd&gt;F1&lt;/kbd&gt;, I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Grub(takes me to minimal bash)&#xA; Apricity(previous os which I removed partition for)&#xA; Ubuntu(takes me to minimal bash)&#xA; Windows&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dont know what to do anymore. I have tried updating grub to no avail. I have searched for hours on how to fix this, but nothing has worked. Please help me.&lt;/p&gt;&#xA;" OwnerUserId="2545" LastEditorUserId="817" LastEditDate="2016-01-15T07:52:25.643" LastActivityDate="2016-01-15T07:52:25.643" Title="How to access Dual boot when Grub is corrupted?" Tags="|boot|grub|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2169" PostTypeId="1" AcceptedAnswerId="2175" CreationDate="2015-09-26T10:06:44.500" Score="1" ViewCount="336" Body="&lt;p&gt;Today I tried to install megasync icons from this &lt;a href=&quot;https://github.com/cybre/megasync-elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/cybre/megasync-elementary&lt;/a&gt; repository but process stuck on this line because my provider is blocking mega.nz site in my country. How can I stop this process? Everytime when I use &quot;apt-get update&quot; I get stuck process on this line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank You.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rotHc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rotHc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2547" LastActivityDate="2015-09-26T17:59:36.673" Title="apt-get update stuck" Tags="|release-freya|software-installation|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2170" PostTypeId="2" ParentId="2129" CreationDate="2015-09-26T14:25:35.510" Score="1" Body="&lt;p&gt;You can have a set of solutions for this problem.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;try using a different download manager, my recommendation is the Open source &lt;a href=&quot;http://ugetdm.com&quot; rel=&quot;nofollow&quot;&gt;Uget&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;try using the web browser's download manager. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;try to download a little smaller files to check if its not the fault of ISP.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="179" LastActivityDate="2015-09-26T14:25:35.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2171" PostTypeId="2" ParentId="2167" CreationDate="2015-09-26T14:33:27.907" Score="2" Body="&lt;p&gt;Here's the answer from &lt;a href=&quot;https://askubuntu.com/questions/133533/how-to-remove-ubuntu-and-put-windows-back-on/143482#143482&quot;&gt;https://askubuntu.com/questions/133533/how-to-remove-ubuntu-and-put-windows-back-on/143482#143482&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will help you restore the windows MBR The Master Boot record. You need to follow the first set of steps only since you have already removed your ubuntu partition.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;To remove Ubuntu, you will need a Windows Recovery CD or Installation&#xA;  CD, or a Ubuntu Live CD.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt;  If you don't have a Windows Installation or Recovery CD available, you can download the Windows 7 ISO file (contact Digital&#xA;  River customer support as &lt;a href=&quot;http://drh.img.digitalriver.com/store/mswpus/ContentTheme/pbPage.Upgrade&quot; rel=&quot;nofollow noreferrer&quot;&gt;said in Microsoft help page&lt;/a&gt;).  You&#xA;  cannot install Windows without a genuine Purchased Product Key though,&#xA;  as these ISO files are 100% legal and will only install as an&#xA;  Evaluation copy for 30 days without a product key.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;To remove GRUB:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;Grab a Windows recovery media or installation CD and boot from it.  You should see this on a &lt;strong&gt;recovery media&lt;/strong&gt; CD.  &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/H462u.png&quot; alt=&quot;System Recovery Options dialog&quot;&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;And you should see this on an &lt;strong&gt;installation media&lt;/strong&gt; CD.  Click&#xA;  &quot;Repair your computer&quot; and you should see a screen like the first&#xA;  image. &lt;img src=&quot;https://i.stack.imgur.com/IpxmC.jpg&quot; alt=&quot;Image from bleepingcomputer.com&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Open the Command Prompt, then type &lt;code&gt;bootrec /fixmbr&lt;/code&gt; into the Command Prompt.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/BWvzW.png&quot; alt=&quot;Command prompt FIXMBR&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Reboot and boot into Windows.  Then follow the steps below to remove the Ubuntu partitions.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;(Images from &lt;a href=&quot;http://www.howtogeek.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;HowtoGeek&lt;/a&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;blockquote&gt;&#xA;    &lt;h2&gt;Till here might do your work rest is bonus&lt;/h2&gt;&#xA;  &lt;/blockquote&gt;&#xA;  &#xA;  &lt;hr&gt;&#xA;  &#xA;  &lt;p&gt;If you don't have a Windows recovery CD or you are constrained to&#xA;  download and burn the ISO files mentioned before, you can use&#xA;  &lt;a href=&quot;http://sourceforge.net/p/boot-repair/home/Home/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-repair&lt;/a&gt;.  It is a tool that fixes most boot problems(Windows&#xA;  or Ubuntu).  I suggest using a Windows CD if possible.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;To use boot repair:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;Boot from a Ubuntu live CD or USB&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Type these lines in the terminal one line at a time.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Search for Boot-Repair in the Dash and launch it.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/XZ7s4.png&quot; alt=&quot;Boot repair dialog&quot;&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;To fix your computer with Boot-repair, simply click the &quot;Recommended&#xA;  Repair&quot; button.  Then follow the steps below to remove the Ubuntu&#xA;  Partitions.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;hr&gt;&#xA;  &#xA;  &lt;p&gt;To delete the Ubuntu Partitions:&lt;/p&gt;&#xA;  &#xA;  &lt;ol start=&quot;4&quot;&gt;&#xA;  &lt;li&gt;&lt;p&gt;Go to Start, right click Computer, then select Manage.  Then select Disk Management from the sidebar.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9I2Az.png&quot; alt=&quot;Disk Management&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Right-click your Ubuntu partitions and select &quot;Delete&quot;. &lt;strong&gt;Check before you delete!&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Then, right-click the partition that is on the Left of the free space.  Select &quot;Extend Volume&quot;.  Go through the Wizard and Finish it. &#xA;  &lt;img src=&quot;https://i.stack.imgur.com/UGI2Y.png&quot; alt=&quot;Extend Volume Wizard&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Done!&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;p&gt;Another note from &lt;a href=&quot;https://askubuntu.com/users/76265/tanner&quot;&gt;Tanner&lt;/a&gt;: If you are using an extended&#xA;  partition, you might have to remove the big extended partition to make&#xA;  the space unallocated.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="179" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-14T23:30:26.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2172" PostTypeId="1" CreationDate="2015-09-26T16:51:08.453" Score="1" ViewCount="101" Body="&lt;p&gt;How to enable touchscreen and stylus input after installing elementary on my HP EliteBook 2740p? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="2551" LastActivityDate="2015-09-26T16:51:08.453" Title="Touchscreen &amp; Stylus on HP 2740p" Tags="|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2173" PostTypeId="1" CreationDate="2015-09-26T17:00:34.807" Score="2" ViewCount="82" Body="&lt;p&gt;I have recently installed &lt;strong&gt;Elementary OS &lt;em&gt;FREYA&lt;/em&gt;&lt;/strong&gt;, And I am facing a huge problems with installing &lt;em&gt;graphics drivers&lt;/em&gt; for NVIDIA for my config (see below.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to follow the information as found on internet including:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/549915/how-to-install-nvidia-drivers-with-bumblebee-on-ubuntu-14-04&quot;&gt;Nvidia Optimux with Ubuntu 14.04&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This resulted in my computer-fan running &lt;strong&gt;wild&lt;/strong&gt; and my laptop shutting down with no information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I reinstalled OS&lt;/em&gt; and after that I found the page &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28/installing-bumblebee-on-freya&quot;&gt;here&lt;/a&gt; which is now obselete solution as per the author himself. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to use the page &lt;a href=&quot;https://wiki.ubuntu.com/Bumblebee&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bumblebee on UBUNTU WIKI&lt;/a&gt;, for installation but I cannot find the packages &lt;strong&gt;&quot;virtualgl*&quot;&lt;/strong&gt; which are required by &lt;em&gt;Bumblebee&lt;/em&gt;. I found the &lt;a href=&quot;https://askubuntu.com/questions/549915/how-to-install-nvidia-drivers-with-bumblebee-on-ubuntu-14-04#comment834878_549916&quot;&gt;comment&lt;/a&gt;, which suggests installing &lt;strong&gt;xorg-edgers ppa&lt;/strong&gt; which, I am not sure as you read the &lt;a href=&quot;https://launchpad.net/~xorg-edgers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;homepage&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone provide me with a solution for installing graphics drivers for NVIDIA with &lt;strong&gt;FREYA&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE (NOT DUPLICATE)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution as suggested in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28/installing-bumblebee-on-freya&quot;&gt;here&lt;/a&gt; is similar to this &lt;a href=&quot;https://askubuntu.com/questions/549915/how-to-install-nvidia-drivers-with-bumblebee-on-ubuntu-14-04&quot;&gt;one&lt;/a&gt;. This did not work for me because, this resulted in my computer-fan running &lt;strong&gt;wild&lt;/strong&gt; and my laptop shutting down with no information. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CONFIG:&#xA;XPS L702X - i7-2670QM&#xA;XPS 72x BTS: 2nd generation Intel Core i7 - 267QM proc 2.20 GHz with Turbo&#xA;Display: 17.3in HD + WLED True-Life (1600 x 900) with 2.0 Mega Pixel Integrated&#xA;RAM Memory: 8GB&#xA;Graphics: 1GB NVIDIA GeForce GT 550M Graphics Card&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2550" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-03-07T18:11:03.620" Title="NVIDIA GPUs on elementary OS" Tags="|release-freya|graphic-drivers|bumblebee|" AnswerCount="0" CommentCount="4" ClosedDate="2015-09-29T18:10:09.303" ContentLicense="CC BY-SA 3.0" />
  <row Id="2174" PostTypeId="1" CreationDate="2015-09-26T17:52:49.770" Score="0" ViewCount="130" Body="&lt;p&gt;I am trying to get backlight working on my laptop. It worked on ubuntu before so I don't really understand why it is not working atm. I also tried the vendor flags in grub already.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here some extra information: &lt;a href=&quot;http://hastebin.com/kogazivida.avrasm&quot; rel=&quot;nofollow&quot;&gt;http://hastebin.com/kogazivida.avrasm&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2552" LastActivityDate="2015-09-26T18:17:48.560" Title="Backlight not working on toshiba sattelite C660" Tags="|kernel|backlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2175" PostTypeId="2" ParentId="2169" CreationDate="2015-09-26T17:59:36.673" Score="1" Body="&lt;p&gt;Try removing &lt;code&gt;mega.nz&lt;/code&gt; from the repo list. You can do that using the GUI:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/o0qcB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o0qcB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sorry for the dutch screenshot&lt;/p&gt;&#xA;" OwnerUserId="2552" LastActivityDate="2015-09-26T17:59:36.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2176" PostTypeId="1" AcceptedAnswerId="2179" CreationDate="2015-09-26T18:00:30.067" Score="1" ViewCount="147" Body="&lt;p&gt;I need to use a beep sound in a shell script as follow:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo -e '\a'&#xA;&#xA;echo -ne '\007'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it does not work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the reason?&lt;/p&gt;&#xA;" OwnerUserId="2553" LastActivityDate="2015-09-26T21:26:48.680" Title="Beep works but the bell character makes no sound" Tags="|sound|pantheon-terminal|indicator-sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2177" PostTypeId="2" ParentId="2174" CreationDate="2015-09-26T18:17:48.560" Score="2" Body="&lt;p&gt;I just figured it out... . &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo nvidia-xconfig&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo nano /etc/X11/xorg.conf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add &lt;code&gt;Option &quot;RegistryDwords&quot; &quot;EnableBrightnessControl=1&quot;&lt;/code&gt; to the device section.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2552" LastActivityDate="2015-09-26T18:17:48.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2178" PostTypeId="2" ParentId="2161" CreationDate="2015-09-26T21:24:53.653" Score="3" Body="&lt;p&gt;This is expected behavior. If you have enabled disk encryption, you'll need to enter your password to unlock the disk or the computer won't be able to boot.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-26T21:24:53.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2179" PostTypeId="2" ParentId="2176" CreationDate="2015-09-26T21:26:48.680" Score="1" Body="&lt;p&gt;By default the &quot;audible bell&quot; is disabled in Terminal. You can re-enable it by setting &lt;code&gt;org.pantheon.terminal.settings audible-bell&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt; using dconf editor or the &lt;code&gt;gsettings&lt;/code&gt;command&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-26T21:26:48.680" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2180" PostTypeId="1" CreationDate="2015-09-26T22:17:17.677" Score="1" ViewCount="1808" Body="&lt;p&gt;Suppose we want to use a Tower Server as a Workstation. The Tower Server would have server motherboard, 16-cores, 200+ GB RAM, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(1) I really like the look and feel of elementary OS, can I get elementary OS to install on the Server?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(2) Separately, I want to use a 4-monitor say based on a NVIDIA Quadro graphics card. Any compatibility issues with elementary OS? I read a few places online where they had trouble with multiple monitors with elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="618" LastEditorUserId="26" LastEditDate="2017-04-12T13:06:10.287" LastActivityDate="2017-04-12T13:06:10.287" Title="Can I use elementary OS on a server?" Tags="|system-installation|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2181" PostTypeId="1" CreationDate="2015-09-26T22:30:42.720" Score="5" ViewCount="2916" Body="&lt;p&gt;Laptop: Lenovo T530&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jT7d6.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jT7d6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;External VGA monitor: LG Flatron E2051&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jI79T.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jI79T.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The LG monitor is set as primary. The login screen shows on both the laptop monitor and the external monitor. The resolution of the laptop monitor is correct, but the resolution on the LG monitor is the same as the laptop monitor, instead of the correct resolution as shown above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I login, the resolution on the LG monitor switches to the correct resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I lock the screen, the resolution of the LG monitor drops down to the incorrect resolution and corrects itself when I log in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to take a screenshot of the login screen, but all I ended up with was a black image.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I fix this problem, so that the login screen is the correct resolution on both monitors at bootup and when the screen is locked?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="2554" LastEditorUserId="2554" LastEditDate="2015-09-27T11:50:56.703" LastActivityDate="2016-07-22T14:51:43.200" Title="Pantheon-greeter login screen has incorrect resolution on external monitor" Tags="|release-freya|greeter|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2182" PostTypeId="1" CreationDate="2015-09-26T23:40:13.427" Score="2" ViewCount="1078" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vAvbA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vAvbA.png&quot; alt=&quot;Missing feature&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I miss a function to hide some applications in Slingshot. &lt;/p&gt;&#xA;" OwnerUserId="2559" LastEditorUserId="22" LastEditDate="2015-09-28T16:13:59.160" LastActivityDate="2015-09-28T16:13:59.160" Title="Function to hide apps in Slingshot" Tags="|slingshot|" AnswerCount="3" CommentCount="0" ClosedDate="2015-09-29T04:14:08.600" ContentLicense="CC BY-SA 3.0" />
  <row Id="2183" PostTypeId="2" ParentId="2159" CreationDate="2015-09-27T00:13:14.597" Score="1" Body="&lt;p&gt;The short answer is that Files is a file browser, not an FTP app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a native FTP app for elementary OS called &lt;a href=&quot;https://code.launchpad.net/taxi&quot; rel=&quot;nofollow&quot;&gt;Taxi&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-27T00:13:14.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2184" PostTypeId="1" CreationDate="2015-09-27T00:20:58.690" Score="2" ViewCount="1886" Body="&lt;p&gt;I've installed (sudo apt-get install indicator-synapse), and I see the icon on the wingpanel.  However, I can't activate it with any shortcut (ctrl-space doesn't work, which I though was the default), and can't find the entry in dconf-editor (net/launchpad/indicator-synapse) to change the shortcut!&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2015-11-14T11:17:52.493" Title="how can I get indicator-synapse working?" Tags="|applications|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2185" PostTypeId="2" ParentId="2182" CreationDate="2015-09-27T02:41:38.140" Score="1" Body="&lt;p&gt;May not be what you want, but here's a guide:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can manually remove (or move, if you want it to be temporary) the plethora of .desktop files found in either &lt;code&gt;/usr/share/applications&lt;/code&gt; or &lt;code&gt;/usr/local/share/applications&lt;/code&gt;. Most of these &quot;shortcuts&quot;, or rather, .desktop files, are located in these two directories. Using administrative privileges, you can move these &quot;.desktop&quot; files into another directory for safe keeping, or remove them completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run &lt;code&gt;sudo xdg-open /usr/share/applications&lt;/code&gt; to open an administrative Files viewer that starts at the shortcuts folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mXn9c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mXn9c.png&quot; alt=&quot;Administrative Files Window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should see something like this.&#xA;Move and remove as you want, just be careful when removing. It's hard to get them back without reinstalling the application.&lt;/p&gt;&#xA;" OwnerUserId="2561" LastActivityDate="2015-09-27T02:41:38.140" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2186" PostTypeId="2" ParentId="1762" CreationDate="2015-09-27T03:03:32.453" Score="2" Body="&lt;p&gt;The machine is attempting to book to your second drive. There are a few things that fix this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reorder Boot Devices in BIOS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By pressing the function keys, ususally &lt;kbd&gt;F2&lt;/kbd&gt; during startup (like, as soon as you power on), you can enter the BIOS. Look for a &quot;Boot Order&quot; section of the BIOS (usually one of the last tabs). Find your USB HDD, USB DISK, and/or your USB CD and move it/all three to the bottom of the list, so that your main disk (either SATA or IDE) is on top.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Remove &quot;BOOT&quot; Flag from the Drive&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually when OS's are installed on a drive, they manually flag the drive as bootable with the BOOT flag. This is good, until you delete the OS. For many other reasons, your drive might have a BOOT flag on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start up your and plug the drive in after it has booted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install gparted: &lt;code&gt;sudo apt-get install gparted&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run gparted: &lt;code&gt;sudo gparted&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look for you naughty disk on the upper-right corner of the screen (using a flashdrive for this example):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1yNXt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1yNXt.png&quot; alt=&quot;GParted Drive Selection&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select it, right-click the partition that says &quot;boot&quot; on the right side, and uncheck the &quot;boot&quot; flag:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YlbaD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YlbaD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once unchecked, close the flag window and close GParted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still have trouble, let me know how it goes and I'll see if I can help more.&lt;/p&gt;&#xA;" OwnerUserId="2561" LastActivityDate="2015-09-27T03:03:32.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2187" PostTypeId="2" ParentId="2022" CreationDate="2015-09-27T04:30:18.543" Score="3" Body="&lt;p&gt;You dont' need your lightdm.conf file. I would rename the file as to make the system believe it isn't there. I only hae pantheon-greeter.conf and users.conf in my /etc/lightdm/ folder, and I don't have auto logins.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make your /etc/lightdm/pantheon-greeter.conf look like this, too:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mvIAw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mvIAw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really don't think you need a lightdm.conf for elementary. Try renaming the file.&lt;/p&gt;&#xA;" OwnerUserId="2561" LastActivityDate="2015-09-27T04:30:18.543" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2188" PostTypeId="2" ParentId="2074" CreationDate="2015-09-27T04:35:14.423" Score="3" Body="&lt;p&gt;Disable the second screen monitor in Display settings when it isn't in use. Any windows will be forced to your only screen, and all new windows will stay on this screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try &lt;kbd&gt;SUPER&lt;/kbd&gt;+&lt;kbd&gt;DOWN&lt;/kbd&gt; to view workspaces. You might be able to grab the window there, too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not a bad first question :D&lt;/p&gt;&#xA;" OwnerUserId="2561" LastActivityDate="2015-09-27T04:35:14.423" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2189" PostTypeId="1" AcceptedAnswerId="2190" CreationDate="2015-09-27T04:42:15.460" Score="8" ViewCount="4305" Body="&lt;p&gt;In GNOME there is the drop down terminal extension that appears when you press &lt;code&gt;'&lt;/code&gt; (the key above tab).  Can I do the same with the terminal program shipped with elementary OS Freya?  If not, is there an application I can download to have a drop down terminal?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2017-07-13T08:24:43.640" Title="Drop down terminal in elementary OS?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2190" PostTypeId="2" ParentId="2189" CreationDate="2015-09-27T06:05:34.003" Score="5" Body="&lt;p&gt;For a drop down terminal you can either use &lt;a href=&quot;http://www.webupd8.org/2015/05/drop-down-terminal-guake-070-released.html&quot; rel=&quot;noreferrer&quot;&gt;guake drop down terminal&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or &lt;a href=&quot;http://www.webupd8.org/2013/02/terra-drop-down-terminal-emulator-with.html&quot; rel=&quot;noreferrer&quot;&gt;terra: mix of guake and terminal emulation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-27T06:05:34.003" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2191" PostTypeId="1" CreationDate="2015-09-27T06:56:35.157" Score="2" ViewCount="525" Body="&lt;p&gt;When I open the webinterface to my mailserver (Zimbra) through HTTPS, I get the message that the 'signing certificate authority is not known'. In Geary the same thing happens. But not in Firefox or Thunderbird. The certificate is valid and not selfsigned, it's a Comodo PositiveSSL certificate.&lt;/p&gt;&#xA;" OwnerUserId="2563" LastActivityDate="2016-09-08T17:27:24.907" Title="signing certificate authority is not known" Tags="|pantheon-mail|midori|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2192" PostTypeId="2" ParentId="2184" CreationDate="2015-09-27T08:00:14.987" Score="3" Body="&lt;p&gt;After installing synapse you should either restart wingpanel or log out and back in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To restart wingpanel: &lt;code&gt;killall wingpanel&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The default indicator-synapse shortcut is: &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.webupd8.org/2013/06/synapse-indicator-new-search.html&quot; rel=&quot;nofollow&quot;&gt;install indicator synapse&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://synapse.zeitgeist-project.com/wiki/index.php?title=Plugins/Configuration&quot; rel=&quot;nofollow&quot;&gt;Configure synapse&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="22" LastEditDate="2015-09-28T17:53:38.783" LastActivityDate="2015-09-28T17:53:38.783" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2193" PostTypeId="1" CreationDate="2015-09-27T08:15:08.957" Score="3" ViewCount="484" Body="&lt;p&gt;I am using freya(64bit) and have installed indicator-synapse from the ppa found here:&lt;br&gt;&#xA;&lt;a href=&quot;http://www.webupd8.org/2013/06/synapse-indicator-new-search.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;install indicator-synapse&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything is working fine, but i just can't find the &quot;config.json&quot; file which is supposed to be at &lt;code&gt;~/.config/synapse/config.json&lt;/code&gt;  according to &lt;a href=&quot;http://synapse.zeitgeist-project.com/wiki/index.php?title=Plugins/Configuration&quot; rel=&quot;nofollow noreferrer&quot;&gt;indicator-synapse configuration&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/174838/can-i-change-synapse-shortcut-to-super-windows-key-alone&quot;&gt;here: jules' answer&lt;/a&gt; says the default path for the config file has been changed to &lt;code&gt;~/.config/hotkeys/synapse/synapse.hotkeys&lt;/code&gt;. But I cannot find hotkeys dir neither in ~/.config/ nor /home/username/.config/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, can anyone please guide me to the path to this file.&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-17T12:50:15.533" Title="Cannot find indicator-synapse config file" Tags="|release-freya|applications|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2195" PostTypeId="1" AcceptedAnswerId="2196" CreationDate="2015-09-27T11:14:23.440" Score="1" ViewCount="571" Body="&lt;p&gt;I currently have elementary OS Freya installed on a 250GB SSD. I have a 1TB HDD that hasn't been plugged into my computer yet. I was wondering, is it possible to plug this 2nd HDD into my computer, install Windows on it, then choose which drive to boot into at startup?  If so, how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-09-27T11:30:27.323" Title="Dual boot elementary OS on SSD and Windows 10 on separate HDD?" Tags="|dual-boot|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2196" PostTypeId="2" ParentId="2195" CreationDate="2015-09-27T11:30:27.323" Score="1" Body="&lt;p&gt;You could simply install windows on your extra HDD. And keep booting from your SDD. Than just do &lt;code&gt;sudo update-grub&lt;/code&gt;. To make grub detect your new windows installation. Next time your startup, you can select windows in your boot menu.&lt;/p&gt;&#xA;" OwnerUserId="2552" LastActivityDate="2015-09-27T11:30:27.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2197" PostTypeId="1" CreationDate="2015-09-27T11:41:13.220" Score="2" ViewCount="806" Body="&lt;p&gt;Whenever I lock my PC the monitors change resolution (or something) making the whole locking/unlocking process slower.&lt;/p&gt;&#xA;" OwnerUserId="2356" LastEditorUserId="2356" LastEditDate="2015-09-27T16:28:07.960" LastActivityDate="2015-09-27T16:28:07.960" Title="Why does the lock screen change monitor resolution?" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2198" PostTypeId="2" ParentId="2181" CreationDate="2015-09-27T11:45:48.150" Score="5" Body="&lt;p&gt;xrandr allows us to reconfigure the X server without restarting it. Let's use it to set the correct resolution at startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find out how the monitors are identified on your system. At the terminal, run the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q | grep ' connected ' | awk '{ print $1 }'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My output is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LVDS1&#xA;VGA1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I want to narrow down the above results to only the LG monitor, so that I can assign that to a variable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q | grep 'VGA1 connected' | awk '{ print $1 }'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The output is now:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;VGA1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Lets create a script that checks to see if the LG monitor is connected. If it is connected, let's switch off the laptop monitor, set the LG monitor to primary and set it to the correct resolution. The laptop monitor will automatically switch back on after a successful login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create the bash script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /usr/local/bin/correct-screen-resolution-pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Script contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;LG=&quot;$(xrandr -q | grep 'VGA1 connected' | awk '{ print $1 }')&quot;&#xA;if [ &quot;$LG&quot; = &quot;VGA1&quot; ]; then&#xA;  xrandr --output LVDS1 --off&#xA;  xrandr --output VGA1 --primary --mode 1600x900&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;We need to make the script executable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /usr/local/bin/correct-screen-resolution-pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, we need to call the script from pantheon-greeter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /usr/share/lightdm/lightdm.conf.d/40-pantheon-greeter.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At the bottom of the file, add the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;greeter-setup-script=/usr/local/bin/correct-screen-resolution-pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/iegik/baad31f92edb0ebf88cf93c1ab742463&quot; rel=&quot;nofollow&quot;&gt;Example&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2554" LastEditorUserId="5568" LastEditDate="2016-07-22T14:51:43.200" LastActivityDate="2016-07-22T14:51:43.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2199" PostTypeId="1" CreationDate="2015-09-27T11:50:04.163" Score="1" ViewCount="232" Body="&lt;p&gt;Guys help me change my login screen wallpaper. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already tried instructions with replacing the default file and nothing happened. &#xA;How can I do that?&lt;/p&gt;&#xA;" OwnerUserId="2565" LastActivityDate="2015-09-27T11:50:04.163" Title="How to change login screen?" Tags="|greeter|display|wallpaper|user|" AnswerCount="0" CommentCount="2" ClosedDate="2015-09-28T04:41:04.403" ContentLicense="CC BY-SA 3.0" />
  <row Id="2200" PostTypeId="1" AcceptedAnswerId="2202" CreationDate="2015-09-27T11:54:51.300" Score="10" ViewCount="5007" Body="&lt;p&gt;I do not want to see the Guest account on my login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I disable it?&lt;/p&gt;&#xA;" OwnerUserId="2554" LastEditorUserId="45" LastEditDate="2015-09-27T17:35:25.777" LastActivityDate="2015-09-27T17:35:25.777" Title="How can I disable the guest account?" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2201" PostTypeId="2" ParentId="2200" CreationDate="2015-09-27T11:57:24.797" Score="-1" Body="&lt;p&gt;Open up the pantheon-greeter config file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /usr/share/lightdm/lightdm.conf.d/40-pantheon-greeter.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following line and save:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;allow-guest=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Done.&lt;/p&gt;&#xA;" OwnerUserId="2554" LastActivityDate="2015-09-27T11:57:24.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2202" PostTypeId="2" ParentId="2200" CreationDate="2015-09-27T12:25:32.777" Score="15" Body="&lt;p&gt;&lt;strong&gt;A more convenient way to disable the guest login is:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;em&gt;System Settings&lt;/em&gt; and navigate to &lt;em&gt;User Accounts&lt;/em&gt;.&lt;br&gt;&#xA;Then select &lt;em&gt;Guest Session&lt;/em&gt; and unlock the settings by authenticating with your user password:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iAjlW.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iAjlW.png&quot; alt=&quot;Unlock&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can now easily disable the guest session:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ME3c8.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ME3c8.png&quot; alt=&quot;disabled guest session&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-09-27T12:25:32.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2203" PostTypeId="2" ParentId="2182" CreationDate="2015-09-27T12:41:26.030" Score="0" Body="&lt;p&gt;You can use a menu editor like &lt;code&gt;menulibre&lt;/code&gt; or &lt;code&gt;alacarte&lt;/code&gt; to edit and hide application shortcuts in slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The context menu is a good idea, though.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-09-27T12:41:26.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2204" PostTypeId="2" ParentId="2197" CreationDate="2015-09-27T12:45:25.167" Score="1" Body="&lt;p&gt;Have a look at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2181/pantheon-greeter-login-screen-has-incorrect-resolution-on-external-monitor&quot;&gt;this post&lt;/a&gt; to potentially help you with your resolution issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would assume the audio switching off is by design. Personally, I appreciate that feature.&lt;/p&gt;&#xA;" OwnerUserId="2554" LastActivityDate="2015-09-27T12:45:25.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2205" PostTypeId="2" ParentId="2182" CreationDate="2015-09-27T12:52:12.830" Score="6" Body="&lt;p&gt;Deleting/moving desktop entries in &lt;code&gt;/usr/share/applications&lt;/code&gt; or &lt;code&gt;/usr/local/share/applications&lt;/code&gt; has one major downside:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everytime one of your &quot;hidden&quot; applications gets an update, it will reappear in Slingshot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a more convenient and permanent way to hide your applications:&#xA;Install and run &lt;code&gt;menulibre&lt;/code&gt; from the official repositories. Within this application you can enable &lt;em&gt;Hide from menus&lt;/em&gt; to hide every entry, which you want to disperse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/X2WW1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X2WW1.png&quot; alt=&quot;MenuLibre&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unlike &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2185/22&quot;&gt;Zzzach...'s solution&lt;/a&gt; &lt;em&gt;MenuLibre&lt;/em&gt; doesn't remove the hidden entries, it creates a copy in your local application entries folder &lt;code&gt;~/.local/share/applications&lt;/code&gt; and adds the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NoDisplay=true &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The global desktop entry stays untouched and gets overriden by your local copy. An update of your hidden application will only overwrite the global entry, so this application will stay hidden.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I have to agree with you, a &lt;em&gt;hide&lt;/em&gt; right click menu entry would be the most convenient way :)&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-27T20:45:02.870" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2207" PostTypeId="2" ParentId="724" CreationDate="2015-09-27T14:07:49.813" Score="1" Body="&lt;p&gt;Boot Repair can be helpful, here's a good article about its installation and usage&#xA;&lt;a href=&quot;http://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&quot; rel=&quot;nofollow&quot;&gt;http://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2566" LastActivityDate="2015-09-27T14:07:49.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2208" PostTypeId="2" ParentId="2154" CreationDate="2015-09-27T16:04:56.387" Score="2" Body="&lt;p&gt;elementary OS does not use Yelp. Part of the design philosophy is &quot;&lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#minimal-documentation&quot; rel=&quot;nofollow&quot;&gt;minimal documentation&lt;/a&gt;&quot;. In a nutshell, if it needs documentation it's not a good design.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-27T16:04:56.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2209" PostTypeId="1" AcceptedAnswerId="2210" CreationDate="2015-09-27T16:05:35.147" Score="1" ViewCount="140" Body="&lt;p&gt;I'd like to design an icon set for elementary, but I'm not sure how to make them compatible with Gtk+, or what specifications are required. I'm a designer and have a lot of experience with Illustrator and Inkscape but I'm not sure how to create a working set with correct sizes, file names, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could someone please point me in the right direction ? &lt;/p&gt;&#xA;" OwnerUserId="2567" LastEditorUserId="45" LastEditDate="2015-09-27T16:16:26.570" LastActivityDate="2015-09-27T16:16:26.570" Title="Is there documentation on Icon Design for Gtk+ and elementary OS?" Tags="|themes|icons|design|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2210" PostTypeId="2" ParentId="2209" CreationDate="2015-09-27T16:15:47.280" Score="1" Body="&lt;p&gt;&lt;strong&gt;TL;DR There is no canonical documentation for this.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The hard truth is that there is no comprehensive documentation for creating 3rd party themes and the theme is not considered a &quot;stable API&quot;. You will experience breakage in your theme because we design our software to be used with our artwork. The required names for icons in elementary OS is only really documented in the form of &lt;a href=&quot;https://code.launchpad.net/~elementary-design/elementaryicons/trunk&quot; rel=&quot;nofollow&quot;&gt;the icon theme itself&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's an &lt;a href=&quot;https://wiki.gnome.org/Attic/GnomeArt/Tutorials/IconThemes&quot; rel=&quot;nofollow&quot;&gt;old wiki page&lt;/a&gt; from GNOME about creating icon themes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The absolute minimum that you should provide with an icon set is outlined in the &lt;a href=&quot;http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html&quot; rel=&quot;nofollow&quot;&gt;Free Desktop Icon Naming Specification&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary provides some documentation in the form of a &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#icons&quot; rel=&quot;nofollow&quot;&gt;style guide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-27T16:15:47.280" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2211" PostTypeId="1" CreationDate="2015-09-27T18:20:24.593" Score="2" ViewCount="1010" Body="&lt;p&gt;I can't use SUPER+CTRL+Right to dock a window to the right half of the window but it works fine with the left key and when using the numpad button 6. it's important for me to be able to use the d-pad because my desktop keyboard doesn't have a numpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any one knows what's causing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="2570" LastEditorUserId="2570" LastEditDate="2015-09-27T19:12:17.997" LastActivityDate="2015-09-27T19:12:17.997" Title="Why the d-pad right key doesn't work with SUPER+CTRL while the numpad 6 key does?" Tags="|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ClosedDate="2015-09-29T18:18:49.443" ContentLicense="CC BY-SA 3.0" />
  <row Id="2212" PostTypeId="1" CreationDate="2015-09-27T20:05:30.560" Score="1" ViewCount="69" Body="&lt;p&gt;I've done a clean install of Elementary Freya for the first time and picked full disk encryption. Everything seemed fine until I was required to restart the PC. There was no grub selection screen after the BIOS and instead I was presented with a turned off display(not black screen just turned off with no back-light) until I pressed one of the arrow keys when the display turned on and a &quot;Passphrase&quot; input was requested. After entering the passphrase the system appears to be loading some stuffs and then you go to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this the expected behavior? I am new to elementary and had just some experience with a few other linux distros in the past. but it always loaded into grub and there was never a turned off display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd appreciate any help!&lt;/p&gt;&#xA;" OwnerUserId="2570" LastActivityDate="2015-09-27T20:05:30.560" Title="turned off display on start up and no grub" Tags="|graphic-drivers|grub|display|" AnswerCount="0" CommentCount="2" ClosedDate="2019-02-20T16:12:40.427" ContentLicense="CC BY-SA 3.0" />
  <row Id="2215" PostTypeId="1" CreationDate="2015-09-28T02:12:19.363" Score="5" ViewCount="376" Body="&lt;p&gt;I am unable to find an alarm or timer indicator for Wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hourglass and Tomato work well, but neither integrate with Wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this currently available?&lt;/p&gt;&#xA;" OwnerUserId="2554" LastActivityDate="2015-09-28T06:20:48.093" Title="Wingpanel alarm or timer indicator" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2216" PostTypeId="1" CreationDate="2015-09-28T02:53:30.843" Score="1" ViewCount="719" Body="&lt;p&gt;For standard DVD playback, I have installed&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ubuntu restricted extras &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For encrypted DVD playback, I have run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /usr/share/doc/libdvdread4/install-css.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have also rebooted my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on Files, the encrypted DVD is listed. When I click on the disk, I'm able to see the VIDEO_TS folder and the contents therein. If I click on any of the VOB files, Videos opens with an error dialog that reads Oops! Audience can't play this file! No URI set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I open Videos, I do see the option that reads Play from Disc, but when I click it, it loads the previous video I was watching.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to get DVD playback working?&lt;/p&gt;&#xA;" OwnerUserId="2554" LastEditorUserId="2554" LastEditDate="2015-09-28T03:05:17.757" LastActivityDate="2017-01-23T19:11:33.903" Title="DVD playback error" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2217" PostTypeId="2" ParentId="2215" CreationDate="2015-09-28T06:20:48.093" Score="3" Body="&lt;p&gt;You should search for &lt;code&gt;indicator-remindor&lt;/code&gt;&lt;br&gt;&#xA;Here is the ppa and how to install: &lt;a href=&quot;http://www.webupd8.org/2012/07/schedule-alarms-reminders-in-ubuntu.html&quot; rel=&quot;nofollow&quot;&gt;indicator-remindor&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing remember to log out and back in, or you can use this command:&lt;code&gt;sudo killall wingpanel&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then search for remindor or indicator-remindor in applications menu or synapse to start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works as an alarm/reminder for ubuntu and ubuntu derivatives including elementary.&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2015-09-28T06:20:48.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2219" PostTypeId="2" ParentId="2189" CreationDate="2015-09-28T15:08:57.933" Score="7" Body="&lt;p&gt;I have a drop-down branch for pantheon-terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://code.launchpad.net/~parnold-x/pantheon-terminal/drop-down&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~parnold-x/pantheon-terminal/drop-down&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How to compile:&lt;/strong&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get build-dep pantheon-terminal&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;bzr branch lp:~parnold-x/pantheon-terminal/drop-down&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;cd drop-down &amp;amp;&amp;amp; mkdir build &amp;amp;&amp;amp; cd build&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ..&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can start it with &lt;code&gt;pantheon-terminal --drop-down&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can configure the height and the key in the (default is F12) &lt;code&gt;src/DropDown/PantheonTerminalDropDownWindow.vala&lt;/code&gt; class&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2017-07-13T08:24:43.640" LastActivityDate="2017-07-13T08:24:43.640" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2221" PostTypeId="1" CreationDate="2015-09-28T17:36:38.170" Score="2" ViewCount="1260" Body="&lt;p&gt;I run rEFInd on my laptop with Windows 10 and elementary OS. If I do not configure manual stanzas in rEFInd, it picks up the latest kernel version for elementary and displays: Windows 10, efi-grub and elementary OS, in that order. I want to change this order and display Windows 10, elementary OS and efi-grub. The reason I want to leave the grub entry is because it has the recovery option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, I achieve this using manual stanzas. But the problem in this case is that the code for elementary OS has the kernel number. Because of this, whenever I upgrade the kernel, rEFInd still runs the old kernel until I change it manually. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas for fixes? Or perhaps there is a .efi file for elementary OS that is compiled whenever a new kernel version is installed? &lt;/p&gt;&#xA;" OwnerUserId="2582" LastEditorUserId="45" LastEditDate="2015-09-28T22:01:00.717" LastActivityDate="2016-03-28T21:54:03.907" Title="Can I create a rEFInd entry for elementary OS that always uses the latest kernel?" Tags="|release-freya|boot|dual-boot|refind|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2223" PostTypeId="2" ParentId="2216" CreationDate="2015-09-28T18:53:21.650" Score="2" Body="&lt;p&gt;From the &lt;code&gt;Description&lt;/code&gt; for package &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Please note that this does not install libdvdcss2, and will not let you play&#xA;   encrypted DVDs. For more information, see&#xA;   &lt;a href=&quot;https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There's some troubleshooting as well as how to set region code for the drive at that link. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check output for:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy libdvdread4 libdvdnav4 ubuntu-restricted-extras libdvdcss2 libavcodec-extra-54&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should show 3 asterisks next to the installed version of each, like this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;ubuntu-restricted-extras:&#xA;    Installed: 60.1&#xA;    Candidate: 60.1&#xA;    Version table:&#xA;   *** 60.1 0&#xA;          500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/multiverse amd64 Packages&#xA;          100 /var/lib/dpkg/status&#xA;       60 0&#xA;          500 http://us.archive.ubuntu.com/ubuntu/ trusty/multiverse amd64 Packages&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If it isn't installed, you'll get &lt;code&gt;(none)&lt;/code&gt; for that package. To my understanding, all of those should be installed as they're dependent packages, save for the &lt;code&gt;libdvdcss2&lt;/code&gt; package which is installed with the script &lt;code&gt;install-css.sh&lt;/code&gt;. But this will verify that fact. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;`&lt;/p&gt;&#xA;" OwnerUserId="2573" LastActivityDate="2015-09-28T18:53:21.650" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2225" PostTypeId="1" CreationDate="2015-09-29T03:52:29.683" Score="1" ViewCount="225" Body="&lt;p&gt;I have an old Mac Mini G4 but I am having a hard time installing Freya on it.&#xA;I burned the &lt;code&gt;.iso&lt;/code&gt; to a dvd but when I hold down &lt;code&gt;C&lt;/code&gt; on startup the system doesn't recognize it as a bootable disc and just loads OSX 10.5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The machine is too old to run netbootin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I am going to try is installing Ubuntu 12.04 then installing netbootin from that OS and creating a usb image to load from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Having a hard time with this OS as doesn't seem to want to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it even possible? Maybe PPC chip architecture is not compatible with Freya is what I am beginning to think.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2584" LastEditorUserId="179" LastEditDate="2015-09-29T17:14:07.947" LastActivityDate="2015-09-29T22:42:26.010" Title="How can I / Is it possible to install Freya 3.1 on a MacMini G4?" Tags="|release-freya|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2226" PostTypeId="2" ParentId="755" CreationDate="2015-09-29T04:59:23.360" Score="2" Body="&lt;p&gt;if you're using the daily ppa then the above will not work unless you append the following lines to /etc/apt/preferences.d/elementary-os-patches.pref:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package: *&#xA;Pin: release o=LP-PPA-elementary-os-staging&#xA;Pin-Priority: 666&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this puts the staging ppa ahead of the daily ppa, which has a &quot;newer&quot; version of wingpanel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: &lt;s&gt;unfortunately the staging version of wingpanel is not built against the daily version of libmutter and this causes apt-cache errors. hopefully the team will fix this soon.&lt;/s&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OK, this one has taken some time: today (monday 5th of october) there was an updated build of wingpanel and libwingpanel put on the staging ppa. When it updated it didn't install the updated gsettings keys but you can get them with the following terminal commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://bazaar.launchpad.net/~wingpanel-devs/wingpanel/trunk/download/parnold1%40gmail.com-20150724215205-a7hlbqwiehfv8451/org.pantheon.desktop-20150425124559-zaqsxjmitvc8wv94-32/org.pantheon.desktop.wingpanel.gschema.xml&#xA;glib-compile-schemas ./&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this only applies to existing users, new users you create will get the correct keys by default.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastEditorUserId="2578" LastEditDate="2015-10-05T06:01:27.237" LastActivityDate="2015-10-05T06:01:27.237" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2227" PostTypeId="1" CreationDate="2015-09-29T08:04:46.253" Score="4" ViewCount="401" Body="&lt;p&gt;There's loads of cool in development plugins like tiling and chat bubbles, how do I get them running? as a followup question is there an easy way to begin developing plugins for gala?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't mind complicated answers I'm already fairly well versed in shell commands and compiling.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2019-03-06T20:55:39.037" Title="How do I build and install gala plugins on freya?" Tags="|gala|development|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2228" PostTypeId="1" CreationDate="2015-09-29T08:25:55.277" Score="0" ViewCount="77" Body="&lt;p&gt;I want to use elementary in children education.&#xA;Its possible to lock the bar at the bottom of the screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;Allan&lt;/p&gt;&#xA;" OwnerUserId="2586" LastEditorUserId="37" LastEditDate="2015-09-29T17:15:58.090" LastActivityDate="2015-10-01T17:17:34.270" Title="Forbid changes to plank" Tags="|desktop|" AnswerCount="2" CommentCount="0" ClosedDate="2015-09-29T17:16:06.170" ContentLicense="CC BY-SA 3.0" />
  <row Id="2229" PostTypeId="2" ParentId="2228" CreationDate="2015-09-29T08:49:14.860" Score="2" Body="&lt;p&gt;bring up slingshot and type in &lt;code&gt;plank --preferences&lt;/code&gt; go to behaviour and lock the dock.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2015-09-29T08:49:14.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2231" PostTypeId="2" ParentId="2149" CreationDate="2015-09-29T11:53:03.547" Score="2" Body="&lt;p&gt;You probably added the &lt;a href=&quot;https://launchpad.net/~mozillateam/+archive/ubuntu/firefox-next&quot; rel=&quot;nofollow noreferrer&quot;&gt;official PPA for Firefox Beta&lt;/a&gt; to your repositories. In order to switch back to Firefox stable, you need to remove this PPA again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start &lt;em&gt;Software Updater&lt;/em&gt; and click at &lt;em&gt;Settings&lt;/em&gt;, now switch to the tab &lt;em&gt;Other Software&lt;/em&gt; and search for the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu trusty main &#xA;http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu trusty main (Source Code)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Uncheck or remove these lines and close the &lt;em&gt;Software Updater&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ArSCJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ArSCJ.png&quot; alt=&quot;PPA Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the current stable version of Firefox, uninstall and install Firefox again. If you are using the terminal to install Firefox, please run &lt;code&gt;sudo apt-get update&lt;/code&gt; first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there are still problems, you probably gonna need to delete the previous Firefox profile. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Close &lt;em&gt;Firefox&lt;/em&gt; and open &lt;em&gt;Files&lt;/em&gt;, go to your &lt;em&gt;Home&lt;/em&gt; folder and press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt; to display hidden files. Now delete the folder &lt;code&gt;.mozilla&lt;/code&gt;, which contains your Firefox profile.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You are going to delete your whole Firefox settings, extensions, bookmarks and browsing history!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/omlSh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/omlSh.png&quot; alt=&quot;Firefox profile&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-09-29T11:53:03.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2232" PostTypeId="2" ParentId="2228" CreationDate="2015-09-29T11:54:02.897" Score="2" Body="&lt;p&gt;You can hide the dock(plank) at the bottom by - &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;code&gt;Ctrl&lt;/code&gt; and Right click on the dock and choose preferences&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dpByg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dpByg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In the behaviour section remove the option for hiding dock.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PzM8L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PzM8L.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &gt; &gt; &gt; &lt;a href=&quot;https://i.stack.imgur.com/7XZks.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7XZks.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since you asked for &lt;code&gt;bar&lt;/code&gt; there is a way to turn the dock to a bar in elementary.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In the same preferences dialogue go in behavior and select fill in alignment, also choose Start in Icon Alignment.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/D1QG0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D1QG0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These settings give you a bar at the bottom which looks and works much like that of MSWindows &gt;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AIPw2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AIPw2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note- the theme in the screenshots is &lt;a href=&quot;https://github.com/fsvh/plank-themes&quot; rel=&quot;nofollow noreferrer&quot;&gt;capeos&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="179" LastEditorUserId="179" LastEditDate="2015-10-01T17:17:34.270" LastActivityDate="2015-10-01T17:17:34.270" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2233" PostTypeId="1" CreationDate="2015-09-29T13:23:27.597" Score="1" ViewCount="457" Body="&lt;p&gt;I installed GNU Octave 4.0.0 by compiling from source as explained &lt;a href=&quot;https://askubuntu.com/questions/645600/how-to-install-octave-4-0-0-in-ubuntu-14-04/645718#645718&quot;&gt;here&lt;/a&gt;. However the GUI does not work - that is, if I click on the Octave Icon, nothing happens. However, when I start Octave from terminal all it's fine, but still no GUI. The same question as been asked &lt;a href=&quot;https://askubuntu.com/questions/650396/octave-4-no-gui-some-features-not-installed&quot;&gt;here&lt;/a&gt;, but the answers don't seem to solve the issue. I have elementary OS 0.3.1 Freya (64-bit). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is much appreciated. &lt;/p&gt;&#xA;" OwnerUserId="528" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-10-08T16:25:47.783" Title="Octave 4.0.0 - The GUI does not work" Tags="|gui-toolkits|" AnswerCount="1" CommentCount="2" ClosedDate="2016-09-18T20:20:06.737" ContentLicense="CC BY-SA 3.0" />
  <row Id="2234" PostTypeId="1" CreationDate="2015-09-29T15:36:23.623" Score="1" ViewCount="1136" Body="&lt;p&gt;i've been pulling my hair out because of this, so i had a dual boot(non UEFI, normal BIOS) of windows 8.1 and ubuntu 14.04 and i decided to replace ubuntu with elementary OS 64 bit then installation fails saying &lt;code&gt;package grub-pc failed to install at /target/&lt;/code&gt; so i choose don't install boot loader, after that i boot into the live system again and try &lt;code&gt;grub-install /dev/sda&lt;/code&gt; but i get the error &lt;code&gt;/usr/lib/grub/i386-pc/modinit.sh&lt;/code&gt; doesn't exist, i would greatly appreciate any help, thank you.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastEditorUserId="34" LastEditDate="2015-10-07T03:26:41.263" LastActivityDate="2016-01-10T02:09:17.887" Title="elementary OS non-uefi installation?" Tags="|system-installation|boot|dual-boot|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2236" PostTypeId="2" ParentId="2225" CreationDate="2015-09-29T17:13:44.253" Score="4" Body="&lt;p&gt;This is not possible. elementary does not provide images that are compatible with the PPC processor architecture &lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-09-29T17:13:44.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2237" PostTypeId="1" CreationDate="2015-09-29T17:32:51.350" Score="2" ViewCount="1991" Body="&lt;p&gt;I hard drives formatted with NTFS Windows 10. I want to read and write to these drives with elementary OS. How can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NB: this solution don't work:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/215/how-to-setup-your-ntfs-drives-partitions-to-mount-on-elementary-os-startup&quot;&gt;How to setup your NTFS drives/partitions to mount on elementary OS startup?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2590" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-12-09T13:20:20.873" Title="How to read and write HD formatted with NTFS elementary OS?" Tags="|ntfs|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2238" PostTypeId="2" ParentId="2184" CreationDate="2015-09-29T18:04:47.317" Score="0" Body="&lt;p&gt;This solution worked for me originally posted by Karut on Launchpad:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Manually installing a newer (sucessfully built) build of synapse (529) actually solves this problem. Once you update synapse via package manager the problem of course will reappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download it here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/unstable-upstream/+sourcepub/4275868/+listing-archive-extra&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/unstable-upstream/+sourcepub/4275868/+listing-archive-extra&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or alternatively:&#xA;&lt;a href=&quot;https://code.launchpad.net/~elementary-os/+recipe/indicator-synapse-daily&quot; rel=&quot;nofollow&quot;&gt;https://code.launchpad.net/~elementary-os/+recipe/indicator-synapse-daily&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2015-09-29T18:04:47.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2239" PostTypeId="1" CreationDate="2015-09-29T22:07:46.000" Score="1" ViewCount="139" Body="&lt;p&gt;Well, finally I come here. after a lot of problems, I installed elementary OS Freya with my live USB erasing &lt;strong&gt;ALL&lt;/strong&gt; my macbook pro disk but it was not a solution. Now, I turn on my mac and nothing happens... still in white and after a question mark and thats all. I enter using the live USB with the Try elementary OS option and I see the partitions with Freya but I don't know why WHY! it doesn't start with elementary OS T_T. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pd. I would answer all your question, send information and follow your indications because I thing that there is the best place so solve my problem. Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Update&lt;/em&gt; I've uploaded a video in order to illustrate the problem. &lt;a href=&quot;http://youtu.be/rxJ-FZFyfuo&quot; rel=&quot;nofollow&quot;&gt;Video&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2592" LastEditorUserId="34" LastEditDate="2015-10-08T16:26:26.083" LastActivityDate="2015-11-07T16:41:26.190" Title="Broken bios-Grub idk" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2240" PostTypeId="2" ParentId="2239" CreationDate="2015-09-29T22:23:53.373" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow noreferrer&quot;&gt;Freya has a known UEFI bug. You can find details here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;Here is a sister thread that walks through the fix.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need anything explained and I will try my best to expound on their solution.&lt;/p&gt;&#xA;" OwnerUserId="2361" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-09-29T22:23:53.373" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2241" PostTypeId="2" ParentId="2233" CreationDate="2015-09-29T22:26:05.023" Score="-1" Body="&lt;p&gt;I've installed the QtOctave that you can find in Software Center in elementary OS Freya and it works normally.&lt;/p&gt;&#xA;" OwnerUserId="2592" LastEditorUserId="34" LastEditDate="2015-10-08T16:25:47.783" LastActivityDate="2015-10-08T16:25:47.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2242" PostTypeId="2" ParentId="2225" CreationDate="2015-09-29T22:42:26.010" Score="2" Body="&lt;p&gt;For PowerPc there are versions of Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/PowerPCDownloads&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/PowerPCDownloads&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but elementary OS is not possible.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-09-29T22:42:26.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2243" PostTypeId="1" CreationDate="2015-09-30T07:15:23.327" Score="3" ViewCount="2642" Body="&lt;p&gt;I tried to install elementaryOS on my new HP notebook that I've recently bought for school. &#xA;The PC has UEFI instead of BIOS, I've followed an online guide for installing  elementary OS ( e.g. disable secure-boot,fast boot and legacy boot). &#xA;If I try to run the OS in live mode it works fine, but if I install it I got a grub problem. &#xA;In fact (by clicking on key F9) if I set as first device the grub I got a black screen where I should manually load the linux kernel.&#xA;I've done this (by following an other guide) but, after lonux kernel loading, I got the budybox screen but nothing changes. After the reboot I got the same problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried to install the boot-repair tool which gave me the following message: &lt;a href=&quot;http://paste2.org/Xftv7z2f&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;.&#xA;After reboot the problem is still there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I can set as first boot device windows boot manager and can easly use Windows 10 on the other partition of the same HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope anyone could help me. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2596" LastEditorUserId="2596" LastEditDate="2018-07-21T09:02:30.807" LastActivityDate="2018-07-21T09:02:30.807" Title="Dual boot Windows 10 - elementary OS with UEFI" Tags="|grub|uefi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2244" PostTypeId="1" AcceptedAnswerId="2245" CreationDate="2015-09-30T07:32:40.827" Score="0" ViewCount="545" Body="&lt;p&gt;I have changed my laptop's hard drive for a bigger one, and because the installation of elemmentary was corrupted somehow (didn't start the OS)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I mount the hard drive as an external drive, I can't access the data inside the /home folder because it's encrypted, but I don't remember what is the password that I have set to that folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to &quot;break&quot; the encryption of that folder?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="2426" LastActivityDate="2015-09-30T10:10:36.423" Title="Read data from an encrypted /home directory" Tags="|mount|home|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2245" PostTypeId="2" ParentId="2244" CreationDate="2015-09-30T09:57:35.287" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there any way to &quot;break&quot; the encryption of that folder?  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Yes, there is. This &lt;a href=&quot;https://askubuntu.com/questions/4950/how-to-stop-using-built-in-home-directory-encryption&quot;&gt;post&lt;/a&gt; here seems similar to yours.&#xA;You should also read the official Ubuntu Documentation about Encrypted /home folder, here: &lt;a href=&quot;https://help.ubuntu.com/community/EncryptedHome&quot; rel=&quot;nofollow noreferrer&quot;&gt;Encrypted home folder&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to decrypt a whole filesystem: &lt;a href=&quot;https://askubuntu.com/questions/63594/mount-encrypted-volumes-from-command-line&quot;&gt;Mount encrypted volumes from command line?&lt;/a&gt; See the first answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the official Ubuntu Documentation for mounting encrypted external filesystems: &lt;a href=&quot;https://help.ubuntu.com/community/EncryptedFilesystemsOnRemovableStorage&quot; rel=&quot;nofollow noreferrer&quot;&gt;EncryptedFilesystemsOnExternalStorage&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should also read about LUKS(Linux Unified Key Setup), the disk encryption system in Linux. Here is a full detailed wiki on LUKS: &lt;a href=&quot;https://github.com/guardianproject/luks/wiki&quot; rel=&quot;nofollow noreferrer&quot;&gt;LUKS: Linux Unified Key Setup&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-09-30T10:10:36.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2246" PostTypeId="1" AcceptedAnswerId="2247" CreationDate="2015-09-30T10:07:47.093" Score="8" ViewCount="1373" Body="&lt;p&gt;I have had difficulties trying to get the touchpad to automatically turn off when a USB mouse is connected and enable when it is disconnected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't had success with touchpad-indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found a method that seems to work so far.  I am posting it here as an answer in case anyone else finds it useful.  I would also appreciate suggestions for alternatives or corrections.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2016-10-20T01:21:21.600" Title="How to automatically disable touchpad when USB mouse connected" Tags="|mouse|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2247" PostTypeId="2" ParentId="2246" CreationDate="2015-09-30T10:36:11.977" Score="5" Body="&lt;p&gt;Edit - This works in Freya NOT Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my solution for disabling the touchpad in elementary OS when attaching a USB mouse.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created these instructions based on the following websites:&#xA;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=188918&quot; rel=&quot;nofollow&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=188918&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=170396&quot; rel=&quot;nofollow&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=170396&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As well as the arch wiki on Synaptics touchpad, but I'm only allowed to paste 2 links.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal by pressing the key combination: Super + T or by opening it from the Applications menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the following at the prompt to open Scratch as root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Paste the following into the new file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SUBSYSTEM==&quot;input&quot;, KERNEL==&quot;mouse[0-9]*&quot;, ACTION==&quot;add&quot;, ENV{DISPLAY}=&quot;:0&quot;, ENV{XAUTHORITY}=&quot;/home/$USERNAME$/.Xauthority&quot;, RUN+=&quot;/bin/sh -c '/usr/bin/synclient TouchpadOff=1; sleep 5; /usr/bin/killall -q syndaemon'&quot;&#xA;SUBSYSTEM==&quot;input&quot;, KERNEL==&quot;mouse[0-9]*&quot;, ACTION==&quot;remove&quot;, ENV{DISPLAY}=&quot;:0&quot;, ENV{XAUTHORITY}=&quot;/home/$USERNAME$/.Xauthority&quot;, RUN+=&quot;/bin/sh -c '/usr/bin/synclient TouchpadOff=0'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;* Replace $USERNAME$ in these 2 lines with your actual username. *&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the save button&#xA;Click “Computer” in the left hand column of the dialogue box.&#xA;Navigate to the /etc/udev/rules.d folder&#xA;Type the name “01-touchpad.rules” as the name of the file and click Save&#xA;Close the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This alone should enable and disable the touchpad when attaching or detaching a USB mouse.  This will not disable the touchpad at system startup if a USB mouse is attached.  To do this you can do the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal&#xA;Enter the following at the prompt to open Scratch as root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file and paste the following into it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;lista=`xinput list | grep -i 'mouse'`&#xA;listb=`xinput list | grep -i 'transceiver' | grep -i 'pointer'`&#xA;listc=`xinput list | grep -i 'receiver' | grep -i 'pointer'`&#xA;&#xA;if [ ${#lista} -eq 0 ] &amp;amp;&amp;amp; [ ${#listb} -eq 0 ] &amp;amp;&amp;amp; [ ${#listc} -eq 0 ]; then&#xA;    exec `synclient TouchpadOff=0`&#xA;    notify-send &quot;No USB Mouse Detected&quot; &quot;Your Touchpad is Active&quot;&#xA;else&#xA;    exec  `synclient TouchpadOff=1`&#xA;    notify-send &quot;USB Mouse Detected&quot; &quot;Your Touchpad is Disabled&quot;&#xA;    sleep 5&#xA;    killall -q syndaemon&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Click the Save button&#xA;Click &quot;Computer&quot; in the left column then navigate to /usr/local/bin&#xA;Type the name &quot;mouse_detect.sh&quot; for the filename and click Save&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the &quot;Files&quot; application as an Administrator&#xA;If it is on your Plank, right click to find this option.  If it is not, then open &quot;Files&quot; from the application menu and right-click the icon on Plank when it opens to find the option.&#xA;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &quot;File System&quot; in the left column and navigate to /usr/local/bin.  Your file &quot;mouse_detect.sh&quot; should be present.  Right click on this file and select &quot;Properties&quot;&#xA;Click on the &quot;More&quot; button and then click on each of the &quot;Execute&quot; buttons to ensure they are all highlighted.&#xA;Close Files&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now we need to create an autostart entry&#xA;Open &quot;System Settings&quot; and click &quot;Applications&quot;&#xA;Click &quot;Startup&quot; and click the &quot;+&quot; button in the lower left hand corner.&#xA;When the box opens up type &quot;/usr/local/bin/mouse_detect.sh&quot; in the lower box where it asks you to type a custom command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &quot;Files&quot; and press CTRL-H to display hidden files and press Home in the left hand column&#xA;Navigate to the ~/.config/autostart&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should see a file like &quot;custom-command0.desktop&quot;, open this in &quot;Scratch&quot; by right clicking and selecting Open With. (select Other Application if necessary)&#xA;You should see a line that says Exec=/usr/local/bin/mouse_detect.sh if you are in the right file&#xA;Add the following line line to the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X-GNOME-Autostart-Delay=8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also enter a custom name for the desktop file in the &quot;Name&quot; field and a custom comment in the &quot;Comment&quot; field.&lt;br&gt;&#xA;Note: I had to remove the [en_CA] from my Name[en_CA] field for the name change to be visible in &quot;Files&quot;.  You might have to do the same if you live outside the US.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go back to your startup applications, your custom Name and Comment should be visible and you can enable or disable the autorun of this script on startup by clicking on the toggle to the right of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That should do it.  If the startup script detects other wireless devices as a mouse and disables your touchpad when it shouldn't you can try changing the contents of the mouse_detect.sh file to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;lista=`xinput list | grep -i 'mouse'`&#xA;&#xA;if [ ${#lista} -eq 0 ]; then&#xA;    exec `synclient TouchpadOff=0`&#xA;    notify-send &quot;No USB Mouse Detected&quot; &quot;Your Touchpad is Active&quot;&#xA;else&#xA;    exec  `synclient TouchpadOff=1`&#xA;    notify-send &quot;USB Mouse Detected&quot; &quot;Your Touchpad is Disabled&quot;&#xA;    sleep 5&#xA;    killall -q syndaemon&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This has less chance of detecting wireless mice though, so only use it if the first one does not work for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="2556" LastEditDate="2016-10-20T01:21:21.600" LastActivityDate="2016-10-20T01:21:21.600" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2248" PostTypeId="2" ParentId="459" CreationDate="2015-09-30T11:05:47.087" Score="0" Body="&lt;p&gt;Try this solution proposed by dromnia86 on &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/34dm4t/fixrestart_corrupted_mouse_after_dragging/&quot; rel=&quot;nofollow&quot;&gt;https://www.reddit.com/r/elementaryos/comments/34dm4t/fixrestart_corrupted_mouse_after_dragging/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked nicely for my machine.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Create the file 20-intel.conf in /usr/share/X11/xorg.conf.d/&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/X11/xorg.conf.d/20-intel.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Paste the following into the file and save it:&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier  &quot;Intel Graphics&quot;&#xA;    Driver      &quot;intel&quot;&#xA;    Option      &quot;AccelMethod&quot;  &quot;uxa&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2015-09-30T11:05:47.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2249" PostTypeId="1" CreationDate="2015-09-30T15:27:17.750" Score="1" ViewCount="4535" Body="&lt;p&gt;I am using LiveUSB to see if Elementary works. After locating a mouse, and now able to navigate the OS, I proceeded to bluetooth settings. My trackpad, Apple brand, will briefly flash off and on about every 5 seconds. So I know it can see the device at moments, but it refuses to connect. It is the only active bluetooth atm. Hopefully you can get to work.&#xA;I like what I see but once I return the mouse to the owning computer, Elementary just becomes a picture to look at.&#xA; PS liveusb problem solved by using computer port,NOT keyboard port.&#xA;Hardware: mac-mini late 2009, freya: 64bit&lt;/p&gt;&#xA;" OwnerUserId="2598" LastActivityDate="2015-10-02T23:27:44.710" Title="How to get bluetooth to work?" Tags="|release-freya|live-cd|touchpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2250" PostTypeId="1" CreationDate="2015-09-30T18:06:57.607" Score="2" ViewCount="1165" Body="&lt;p&gt;When I remote into my machine using ssh, I am unable to access any optical media because pantheon files has not mounted the media. Is there a command line utility (preferably other than editing fstab) to mount cdrom media just like  pantheon files does when I click on it?&lt;/p&gt;&#xA;" OwnerUserId="985" LastActivityDate="2015-10-02T11:03:13.630" Title="Pantheon files will not auto mount cdrom or dvdrom media. How do I do this via command line?" Tags="|pantheon-files|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2251" PostTypeId="1" CreationDate="2015-09-30T19:40:46.520" Score="10" ViewCount="772" Body="&lt;p&gt;I installed indicator-synapse before adding the unstable repository and it didn't install the search app, it installed something about the keyboard instead. Then I added the unstable repo and installed synapse again and the search app is there but I can't remove the keyboard thing. Could you help me removing it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;it's the little [Es] icon which appeared after I installed indicator-synapse without the unstable repo&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lMiLV.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lMiLV.png&quot; alt=&quot;The [Es] icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2603" LastEditorUserId="578" LastEditDate="2017-02-23T20:40:22.110" LastActivityDate="2017-02-23T20:40:22.110" Title="How can I hide the keyboard indicator from the panel?" Tags="|release-freya|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2252" PostTypeId="1" CreationDate="2015-09-30T20:04:40.580" Score="0" ViewCount="291" Body="&lt;p&gt;So I upgraded to kernel 3.19.0, which went fine except that the wireless card stopped working. I would have searched for the driver for the wireless card, except that I'm on a laptop with no ethernet port, so if the wireless is gone, there's no internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a Timeshift backup before I started, and was able to restore my system to the pre-upgrade state, which is where I am now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have some advice on how to make the wireless card work after upgrading? Or should I hold out until the next kernel upgrade?&lt;/p&gt;&#xA;" OwnerUserId="2604" LastEditorDisplayName="user968" LastEditDate="2016-02-29T10:55:23.493" LastActivityDate="2016-02-29T10:55:23.493" Title="Wireless card stopped working after kernel upgrade" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2253" PostTypeId="1" CreationDate="2015-09-30T20:13:00.800" Score="6" ViewCount="217" Body="&lt;p&gt;In the elementary os open/save dialog box, folders are sorted alphabetically in with files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E.g. if I had the following in a folder, they would be sorted in this order when I view them in the open/save dialog:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a_file.txt&lt;/li&gt;&#xA;&lt;li&gt;a_folder/&lt;/li&gt;&#xA;&lt;li&gt;another_file.txt&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Note that they're alphabetical, with the folder(s) mixed in with the files. This is actually my preferred way of sorting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Files, if I open the same folder with the same files and sub-folder inside it, it's sorted like this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a_folder/&lt;/li&gt;&#xA;&lt;li&gt;a_file.txt&lt;/li&gt;&#xA;&lt;li&gt;another_file.txt&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Note that the folders are sorted first, and then the files come afterward.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know if there is there any way to make Files in elementary os sort files and folders together, like the open/save dialog box does?&lt;/p&gt;&#xA;" OwnerUserId="2604" LastActivityDate="2015-10-03T15:07:04.940" Title="In Files is it possible to sort folders together w files, rather than folders separate from files, like how files are sorted in the open/save boxes?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2254" PostTypeId="2" ParentId="2025" CreationDate="2015-09-30T21:11:09.677" Score="1" Body="&lt;p&gt;Based on how plank currently detects which program is running, this will always (correctly) determine that the LibreOffice Calc executable is being used. Parameters are not factored in, and it is probable that LireOffice passes of after loading anyway.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-09-30T21:11:09.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2255" PostTypeId="1" AcceptedAnswerId="2257" CreationDate="2015-09-30T21:29:19.823" Score="1" ViewCount="713" Body="&lt;p&gt;I have elementary OS Freya installed on a 2009 MacBook Pro.  After the initial install and update/upgrade last night, elementary worked great for the 6 hours I was using the laptop.  When finished I closed the lid which put the laptop to sleep.  I noticed in class today, when I opened the macbook it allowed me to click my wireless network on campus, but then locked up/froze while connecting to the network.  After about 40 seconds, the splash screen to log in pops up.  I can log in and at that point I was connected to the wireless network, but all my previously opened applications where shutdown and when I re-opened them, they needed recovering.  I used the laptop like normal for another hour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I finished my work and closed my lid, once again putting the laptop to sleep.  In my next class I opened my laptop and proceeded to click Libre Office Writer, it partially opened then locked up/froze.  After 45 seconds or so, the splash screen re-appeared and I was able to log in.  Once again, all applications previously opened were closed and needed recovering when opening files.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a feeling this has to do with sleep?  I have also noticed my laptop runs considerably hotter than using Mac OS X.  I have installed tlp and have it enabled, I also have powertop installed.  I'm currently using open source graphics--I have NEVER been successful in getting nvidia mac graphics working (always black screen afterwards, regardless of which distro or nvidia number driver I try.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice on what might be causing the freezing and how I can fix this issue?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-10-01T00:42:32.147" Title="2009 MacBook Pro running elementary OS Freya freezes shortly after waking from sleep mode" Tags="|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2257" PostTypeId="2" ParentId="2255" CreationDate="2015-10-01T00:42:32.147" Score="1" Body="&lt;p&gt;I think I may have found a solution to my problem, so I wanted to post the solution here in case anyone else is having the same freezing issues.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a similar post I made on a Deb forum over a year ago and the solution was given to me by user kc1di:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try the nouveau.noaccel=1 parameter - hit tab at the boot command and the e type in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nouveau.noaccel=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after the kernel line that has quiet in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that works for you you can make it permanent by editing the /etc/default/grub file. and making it look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;#GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=10&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet nouveau.noaccel=1&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried this with elementary OS and all seems well.  The graphics when an application opens aren't as smooth/clean looking as before, but I've put my computer to sleep, woken it up, opened various apps many times now and it never seems to freeze anymore.  So far so good!&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-10-01T00:42:32.147" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2258" PostTypeId="2" ParentId="2252" CreationDate="2015-10-01T01:28:51.747" Score="1" Body="&lt;p&gt;I figured it out, with some help from reddit: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3n0bjy/upgraded_to_kernel_3190_wireless_card_stopped/&quot; rel=&quot;nofollow&quot;&gt;https://www.reddit.com/r/elementaryos/comments/3n0bjy/upgraded_to_kernel_3190_wireless_card_stopped/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was using the following to clear enough space on /boot to do the upgrade:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l 'linux-*' | sed '/^ii/!d;/'&quot;$(uname -r | sed &quot;s/\(.*\)-\([^0-9]\+\)/\1/&quot;)&quot;'/d;s/^[^ ]* [^ ]* \([^ ]*\).*/\1/;/[0-9]/!d' | xargs sudo apt-get -y purge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And when I did it again, I noticed that some of the things it was removing were dependencies for the package bcmwl-kernel-source, which handles the wireless card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I just installed bcmwl-kernel-source after running the above command, upgraded the kernel and it works, wifi and all!&lt;/p&gt;&#xA;" OwnerUserId="2604" LastActivityDate="2015-10-01T01:28:51.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2259" PostTypeId="1" AcceptedAnswerId="2260" CreationDate="2015-10-01T05:51:49.683" Score="6" ViewCount="696" Body="&lt;p&gt;In ubuntu i could hide a partition by going into the disks application, but in pantheon i cant find tha app, so how would i go about hiding an ntfs partition in pantheon files? ubuntu writes something in /etc/fstab file but i can't remember what it is, thanks in advance.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastEditorUserId="22" LastEditDate="2015-10-01T12:19:40.933" LastActivityDate="2015-10-01T12:19:40.933" Title="How to hide partition from pantheon files?" Tags="|pantheon-files|system|mount|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2260" PostTypeId="2" ParentId="2259" CreationDate="2015-10-01T07:24:14.210" Score="2" Body="&lt;p&gt;Method 1:(tried)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use GParted tool in elementary to achieve what you want.&#xA;This is not provided by default. To install it type this in your terminal:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gparted  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Steps to make ntfs partitions hidden:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open gparted from slingshot menu&lt;/li&gt;&#xA;&lt;li&gt;Right-Click on desired ntfs partitions&lt;/li&gt;&#xA;&lt;li&gt;Goto Manage Flags&lt;/li&gt;&#xA;&lt;li&gt;Check hidden flag&lt;/li&gt;&#xA;&lt;li&gt;Log in and out or Restart&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Remember to unmount the partition first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Method 2:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whichever filesystem you mount gets mounted to /media. In-order to hide it from pantheon files and nautilus, you need to mount it anywhere else than /media, optimal choice would be to mount it under /mnt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following is the link which describes how to do it in nautilus, it should be similar for pantheon files as elementary is a derivative of Ubuntu.(didn't try this for myself)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link: &lt;a href=&quot;https://askubuntu.com/questions/124094/how-to-hide-an-ntfs-partition-from-ubuntu&quot;&gt;hide ntfs partition in ubuntu nautilus&lt;/a&gt; (check the second and third answer, first answer uses disk utility in ubuntu)&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-01T07:24:14.210" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2261" PostTypeId="2" ParentId="2259" CreationDate="2015-10-01T07:26:43.413" Score="5" Body="&lt;p&gt;Since you are already familiar with &lt;em&gt;Disks&lt;/em&gt; and elementary OS is based on Ubuntu, why not use this application again?&lt;br&gt;&#xA;Just open &lt;em&gt;Software Center&lt;/em&gt;, search for &lt;em&gt;Disks&lt;/em&gt; and install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Hp54N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Hp54N.png&quot; alt=&quot;Software Center&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;start &lt;em&gt;Disks&lt;/em&gt; &lt;/li&gt;&#xA;&lt;li&gt;select the partition, you want to hide &lt;/li&gt;&#xA;&lt;li&gt;click at the gear icon and select &lt;em&gt;Edit Mount Options&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;disable &lt;em&gt;Automatic Mount Options&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;make sure &lt;em&gt;Mount at startup&lt;/em&gt; and &lt;em&gt;Show in user interface&lt;/em&gt; are unchecked&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jei4Y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jei4Y.png&quot; alt=&quot;Disks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This partition won't be shown after the next login.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-10-01T10:38:05.157" LastActivityDate="2015-10-01T10:38:05.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2263" PostTypeId="1" CreationDate="2015-10-01T10:12:36.573" Score="1" ViewCount="41" Body="&lt;p&gt;When working with sublime I can search through tags using f12 and in vim also there is Ctrl+]. How do I get a similar functionality in 'Scratch', the native editor of elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="2611" LastEditorUserId="5565" LastEditDate="2016-10-06T02:12:00.783" LastActivityDate="2016-10-06T02:12:00.783" Title="How can I use scratch to search through tags (function definitions) in a project?" Tags="|code|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-06T08:27:28.493" ContentLicense="CC BY-SA 3.0" />
  <row Id="2264" PostTypeId="1" AcceptedAnswerId="2413" CreationDate="2015-10-01T11:42:05.803" Score="3" ViewCount="2100" Body="&lt;p&gt;Second monitor works only when I lock the PC and the lock screen is on. But when I log in the monitor doesn't work, the display doesn't detect any source. The monitor is detected in Settings, but when I try to toggle the monitor on, the toggle button just goes back to off state. It won't let me toggle it on.&lt;/p&gt;&#xA;" OwnerUserId="2612" LastActivityDate="2015-11-23T09:11:27.723" Title="Second monitor not working" Tags="|display|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2265" PostTypeId="1" CreationDate="2015-10-01T12:16:47.203" Score="2" ViewCount="1446" Body="&lt;p&gt;I have a 4 monitor setup with one of my screens rotated. I am having an issue where when I open applications they are opening half on screen half off. I though perhaps the desktop itself might be extended past the screen view and that is why it was opening off screen. However, that does not seem to be the case as the mouse pointer stops at the screen edges and does not extend off screen any further. Is there a setting that I can change that will prevent windows from opening off screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also when a window does open off screen what is the best way to move it on-screen? Usually you can right click the application in some way and move it, but I have not found any similar option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate the help.&lt;/p&gt;&#xA;" OwnerUserId="2613" LastActivityDate="2020-09-16T23:36:27.707" Title="WIndows Opening Off Screen" Tags="|display|window-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2266" PostTypeId="1" CreationDate="2015-10-01T14:11:28.000" Score="2" ViewCount="250" Body="&lt;p&gt;My system language is Arabic and I changed the system default font, but the date &amp;amp; time font which appear on the loging screen didn't change and still the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm wondering if there is a way to change it?&lt;/p&gt;&#xA;" OwnerUserId="2614" LastActivityDate="2015-10-01T14:11:28.000" Title="How to change login screen font?" Tags="|greeter|display|language|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2267" PostTypeId="2" ParentId="2265" CreationDate="2015-10-01T16:37:25.870" Score="4" Body="&lt;p&gt;Quick answer to your second question. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can drag a window by clicking anywhere inside of it with the combination &lt;kbd&gt;Super&lt;/kbd&gt; + left click.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-10-01T16:37:25.870" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2268" PostTypeId="2" ParentId="2251" CreationDate="2015-10-01T17:00:40.243" Score="6" Body="&lt;p&gt;Ok, I solved it!&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install &lt;a href=&quot;http://howtoelementaryos.org/how-to-install-dconf-tools-in-elementary-os&quot; rel=&quot;noreferrer&quot; title=&quot;Dconf-Tools&quot;&gt;DConf-Tools&lt;/a&gt; &lt;code&gt;sudo apt-get install dconf-tools&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;browse: &lt;strong&gt;com &gt; canonical &gt; indicator &gt; keyboard&lt;/strong&gt; and uncheck &lt;strong&gt;&quot;visible&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2603" LastActivityDate="2015-10-01T17:00:40.243" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2273" PostTypeId="2" ParentId="1922" CreationDate="2015-10-01T21:14:02.793" Score="0" Body="&lt;p&gt;Had the same Problem on the same machine (1000he).&#xA;I went to -&gt; system settings -&gt; Displays -&gt; the little gear top right in the symbolised display -&gt; rotation -&gt; clockwise....&#xA;Then you can press the &quot;yes button&quot;.&#xA;Then I rotated back again.&#xA;Did you find a better solution?&#xA;Otherwise elementary should work great on this machine.&#xA;Best operating system I ever installed on it.&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2015-10-01T21:14:02.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2274" PostTypeId="2" ParentId="1922" CreationDate="2015-10-01T21:27:21.590" Score="1" Body="&lt;p&gt;A workaround to reach the hidden buttons:&lt;br&gt;&#xA;Press and hold &lt;kbd&gt;Super&lt;/kbd&gt; and drag the window at any position to move it up and reveal the hidden buttons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should &lt;a href=&quot;http://yorba.org/geary/help/bugs.html&quot; rel=&quot;nofollow&quot;&gt;report this bug to Yorba&lt;/a&gt;, the creators of Geary.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-10-01T21:27:21.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2275" PostTypeId="1" CreationDate="2015-10-01T21:55:42.817" Score="1" ViewCount="193" Body="&lt;p&gt;Printer prints perfect Test Page and Text documents, but when it has to print any PDf or image, it prints only the left half of it but twice next to each other with an horizontal empty space between....?&#xA;(Printer is recognized and installs automatically. Even though install process seems to hang for ever, but after restart printer seems to be installed, but then works as described above....)&#xA;Any Idea?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2015-11-19T13:34:37.800" Title="Brother HL-2030" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2276" PostTypeId="1" CreationDate="2015-10-01T23:12:36.147" Score="1" ViewCount="1233" Body="&lt;p&gt;I've been trying to install elementary on an old computer but it seems to be stuck on the logo. I'm booting the installation from a USB. The hard drive was previously formatted, so no existing operating systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Its been on the logo for an hour and a half&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm new to Linux, sorry if I didn't provide enough info. &lt;/p&gt;&#xA;" OwnerUserId="2622" LastActivityDate="2015-10-01T23:12:36.147" Title="Installation stuck on logo" Tags="|system-installation|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2278" PostTypeId="1" CreationDate="2015-10-02T06:38:01.640" Score="2" ViewCount="361" Body="&lt;p&gt;I have installed elementary OS 0.3.1. I notice that I need to press my mouse buttons very hard to make it work. I can move the cursors around the screen smoothly with no problems, but the main problem are the buttons. Somtimes it even happens that the buttons do not work at all. I can move my cursor, use my keyboard, but I can't click on anything no matter how hard I press. It is not a hardware problem, because it didn't happen in Ubuntu or Fedora or Windows. I even tried two different mouses, plugging them in two different ports without any result. How to solve this?&lt;/p&gt;&#xA;" OwnerUserId="2546" LastEditorUserId="3757" LastEditDate="2016-03-21T04:14:55.197" LastActivityDate="2016-03-21T04:14:55.197" Title="elementary OS Freya 0.3.1 Mouse Problems" Tags="|release-freya|mouse|" AnswerCount="1" CommentCount="2" ClosedDate="2015-11-29T00:53:41.880" ContentLicense="CC BY-SA 3.0" />
  <row Id="2279" PostTypeId="1" CreationDate="2015-10-02T08:03:58.683" Score="0" ViewCount="1619" Body="&lt;p&gt;I have moved over from mint to elementary Freya on my main laptop and it is working as well, if not better in some ways than mint.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 1 main issue that I have tried in vain to fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With elementary Freya as the host I cannot get virtualbox to install and work correctly. If I install from the software centre, virtualbox 4.3.10 installs, an icon appears in Applications-Accessories and virtual box opens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can then create a virtual machine but when the virtual machine is started i get the following error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C6cFk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C6cFk.png&quot; alt=&quot;Error message from virtualbox&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help in solving this would be much appreciated&lt;/p&gt;&#xA;" OwnerUserId="2626" LastActivityDate="2016-01-02T04:57:32.793" Title="Having trouble installing Virtualbox in elementary OS Freya" Tags="|virtualization|virtualbox|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2281" PostTypeId="2" ParentId="2250" CreationDate="2015-10-02T11:03:13.630" Score="1" Body="&lt;p&gt;I'ts pretty simple to do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /mnt/cdrom &amp;amp;&amp;amp; sudo mount /dev/cdrom /mnt/cdrom &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will first create the folder /mnt/cdrom (mkdir = make directory) and then mount the cdrom (/dev/cdrom) to that directory.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-02T11:03:13.630" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2282" PostTypeId="2" ParentId="2278" CreationDate="2015-10-02T12:34:35.873" Score="0" Body="&lt;p&gt;It might be the drivers (try reinstalling them)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But an OS doesn't care about the &quot;single-click-sensitivity&quot;, it only checks if the mouse registers a keypress or not. So its probably a hardware issue.&lt;/p&gt;&#xA;" OwnerUserId="239" LastActivityDate="2015-10-02T12:34:35.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2284" PostTypeId="1" CreationDate="2015-10-02T14:29:01.473" Score="1" ViewCount="1235" Body="&lt;p&gt;Just try to install OS using laptop with 4k display. It will be not possible to install the system, because installer interface gets broken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested on Dell Inspiron 7548.&lt;/p&gt;&#xA;" OwnerUserId="2634" LastEditorUserId="45" LastEditDate="2015-10-02T19:40:19.713" LastActivityDate="2015-10-02T19:40:24.033" Title="Does Elementary OS supports 4k displays?" Tags="|system-installation|graphic-drivers|drivers|hidpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2286" PostTypeId="2" ParentId="2279" CreationDate="2015-10-02T14:45:53.320" Score="3" Body="&lt;p&gt;I have tried a few solutions from askubuntu.com but none of them have work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, the easiest solution seems to be to install the latest version of virtualbox from the official website. &#xA;&lt;a href=&quot;https://www.virtualbox.org/wiki/Linux_Downloads&quot; rel=&quot;nofollow&quot;&gt;https://www.virtualbox.org/wiki/Linux_Downloads&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2500" LastActivityDate="2015-10-02T14:45:53.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2288" PostTypeId="1" CreationDate="2015-10-02T17:05:06.320" Score="0" ViewCount="233" Body="&lt;p&gt;is there a way to set multiple sets of preferences for pantheon terminal, and invoke multiple instances using different preferences?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks,&#xA;Dan&lt;/p&gt;&#xA;" OwnerUserId="2636" LastActivityDate="2015-11-19T13:37:45.007" Title="how can i create and use multiple terminal configurations simultaneously?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2289" PostTypeId="1" CreationDate="2015-10-02T17:31:30.233" Score="3" ViewCount="59" Body="&lt;p&gt;I read that elementary OS supports ARM. I too believe that it should be possible since Ubuntu on which elementary OS is based on supports the Pi. Has any one tried this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I edited this to ask whether elementary plans to release a special Raspberry Pi Edition and I just stated that currently support is there.&lt;/p&gt;&#xA;" OwnerUserId="2637" LastEditorUserId="3757" LastEditDate="2016-05-05T13:36:28.473" LastActivityDate="2016-05-05T13:36:28.473" Title="How do I run elementary OS on Raspberry Pi 2?" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ClosedDate="2015-10-04T05:27:02.460" ContentLicense="CC BY-SA 3.0" />
  <row Id="2290" PostTypeId="1" CreationDate="2015-10-02T17:44:06.230" Score="1" ViewCount="323" Body="&lt;p&gt;Similar or same problem as the other folk with &quot;magic mouse connection issues&quot;. magic mouse has to be reconnected every time I restart my computer. And it has to be done by &quot;bluetooth settings&quot;. If I just change it from the quick menu on the top bar it falsely shows it is connected, but it is not.&#xA;I work on a PC, so it should not be a macintosh hardware related problem.&#xA;When I boot my pc as hackintosh I have no connection issues at all...? So it should be a software problem.&#xA;Any suggestions&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2019-04-10T03:02:35.460" Title="Magic mouse connection issues on PC" Tags="|mouse|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2291" PostTypeId="2" ParentId="2249" CreationDate="2015-10-02T18:05:15.083" Score="2" Body="&lt;p&gt;Try to connect devices by &quot;bluetooth settings&quot; (not just klicking &quot;Connect&quot; in the top bar - this will make it appear to connect but it doesn't connect). Google the &quot;pin option&quot; for your devices, I think it is 0000 but I am not sure.&#xA;This way I have connected magic mouse, track pad, and apple wireless keyboard on a pc usually being a hackintosh. Just the mouse gives me still trouble, see &quot;Magic mouse connection issues on PC&quot;&#xA;Hope that helps&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2015-10-02T18:05:15.083" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2292" PostTypeId="2" ParentId="2087" CreationDate="2015-10-02T18:14:34.653" Score="0" Body="&lt;p&gt;I didn't have the problem when I first deleted the partition where I wanted to install elementary.&#xA;It used to be an option in the installer. The installer asked you if you want to install in this empty space. That was nice. Now it doesnt ask you this specific but it still does this I think.&#xA;At least somehow it worked with my install.&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2015-10-02T18:14:34.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2293" PostTypeId="2" ParentId="2284" CreationDate="2015-10-02T19:40:24.033" Score="1" Body="&lt;p&gt;elementary OS does not currently fully support HiDPI displays&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-02T19:40:24.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2294" PostTypeId="2" ParentId="361" CreationDate="2015-10-02T21:09:02.120" Score="5" Body="&lt;p&gt;I have faced this issue when working with static network profiles in Elementary OS Freya 0.3 and switching between local networks without a public gateway. Like Daniel had mentioned, this is a Captive Portal Assist which allows users to connect to public WiFi hotspots and immediately traps in a minimalistically launched Midori browser to complete certain procedures to connect to the Internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After digging through some links, I did find an &lt;a href=&quot;http://zaantar.eu/2015/08/disable-captive-portal-detection-on-elementary-os-freya/?lang=en&quot; rel=&quot;noreferrer&quot;&gt;external article&lt;/a&gt; that presents a solution to disable this functionality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially, it asks you to run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod -x /etc/NetworkManager/dispatcher.d/90captive_portal_test&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Disclaimer: Although this solves the issue for me, I do not fully understand its implications. Please use it at your own discretion. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Article credit: Zaantarovo&lt;/p&gt;&#xA;" OwnerUserId="2638" LastActivityDate="2015-10-02T21:09:02.120" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2295" PostTypeId="1" AcceptedAnswerId="2299" CreationDate="2015-10-02T21:22:48.657" Score="4" ViewCount="12469" Body="&lt;p&gt;What is the equivalent of &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Del&lt;/kbd&gt; from Windows on elementary? A keyboard short cut that gets special handling and will allow to unfreeze desktop environment / kill resource hogging processes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freezes happen rarely but most solutions I read about for linux don't seem to work on elementary. Is there any &quot;offical&quot; solution for this use case? &lt;/p&gt;&#xA;" OwnerUserId="374" LastActivityDate="2022-07-26T22:12:49.100" Title="What to do when elementary OS freezes?" Tags="|keyboard-shortcuts|microsoft-windows|kernel|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2297" PostTypeId="1" CreationDate="2015-10-02T23:37:02.903" Score="2" ViewCount="351" Body="&lt;p&gt;I've just noticed that the font rendering in Elementary's Document Viewer app seems a little sub-bar with chopped or truncated edges making reading a little uncomfortable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Having read about Infinality font rendering, I'm curious as to what rendering Elementary currently uses. Though, I haven't experienced this problem in other apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can improve font rendering for the pdf viewer? I know the embedded font isn't an issue as I have viewed it on another computer. Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(p.s. view the attached img at 100%)&lt;a href=&quot;https://i.stack.imgur.com/NofrE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NofrE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2567" LastActivityDate="2015-10-02T23:37:02.903" Title="Why is font rendering in Document Viewer poor?" Tags="|display|fonts|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-28T19:01:25.580" ContentLicense="CC BY-SA 3.0" />
  <row Id="2298" PostTypeId="1" CreationDate="2015-10-03T04:22:53.553" Score="2" ViewCount="760" Body="&lt;p&gt;I have elementary os freya installed, and noise audio player doesn't display the art embedded in the mp3 files, it shows the music data in the id3 tag but not the picture, what's up?&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-03T04:22:53.553" Title="Why doesn't noise display album arts embedded in mp3 files?" Tags="|music|audio|" AnswerCount="0" CommentCount="2" ClosedDate="2016-12-28T19:01:08.423" ContentLicense="CC BY-SA 3.0" />
  <row Id="2299" PostTypeId="2" ParentId="2295" CreationDate="2015-10-03T09:53:43.203" Score="3" Body="&lt;p&gt;Not sure, if your system freezes completely, or if it's &quot;just&quot; the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you are very new to linux and didn't already know:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try switching to a Terminal by pressing &lt;code&gt;CTRL+ALT+F1&lt;/code&gt; or &lt;code&gt;...+F2&lt;/code&gt; (your desktop should be at &lt;code&gt;...+F7&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From there you can view all active processes using the command &#xA;&lt;code&gt;ps&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each process has an ID. You can force-quit any process using the command&#xA;&lt;code&gt;kill ID&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're curious, here is &lt;a href=&quot;http://www.cyberciti.biz/faq/show-all-running-processes-in-linux/&quot; rel=&quot;nofollow&quot;&gt;more info on the ps-command&lt;/a&gt;.&#xA;I hope I didn't completely misinterpret your linux-knowledge. :)&lt;/p&gt;&#xA;" OwnerUserId="2454" LastActivityDate="2015-10-03T09:53:43.203" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2300" PostTypeId="1" CreationDate="2015-10-03T11:24:54.847" Score="0" ViewCount="4995" Body="&lt;p&gt;Is it it possible, to use iTunes 12.3 decently with wine or something like that on elementary OS? I really need that Progam for synchronizing my mobile iDevices. &lt;/p&gt;&#xA;" OwnerUserId="2639" LastEditorUserId="3757" LastEditDate="2016-05-05T07:18:02.717" LastActivityDate="2016-05-05T07:18:02.717" Title="iTunes 12 on elementary OS?" Tags="|software-installation|wine|playonlinux|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2301" PostTypeId="2" ParentId="2253" CreationDate="2015-10-03T15:07:04.940" Score="1" Body="&lt;p&gt;To my knowledge, there is no such option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact, I'd find it very counterintuitive, but maybe it's just me.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-10-03T15:07:04.940" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2302" PostTypeId="2" ParentId="2227" CreationDate="2015-10-03T15:17:35.423" Score="1" Body="&lt;p&gt;I'd suggest you to give a look at the active branches at the &lt;a href=&quot;https://code.launchpad.net/gala&quot; rel=&quot;nofollow&quot;&gt;Gala launchpad page&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-10-03T15:17:35.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2306" PostTypeId="1" AcceptedAnswerId="2311" CreationDate="2015-10-03T18:19:13.687" Score="2" ViewCount="90" Body="&lt;p&gt;I configure my account in Elementary OS, and I want duplicate this account. I just want to gain all setting, exactly configure my desktop.&lt;/p&gt;&#xA;" OwnerUserId="2643" LastActivityDate="2015-10-04T06:09:47.517" Title="How create account with other existing account settings" Tags="|desktop|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2307" PostTypeId="1" CreationDate="2015-10-03T19:15:51.927" Score="4" ViewCount="9192" Body="&lt;p&gt;The applications menu in the top left corner of the screen will not open: if clicked nothing happens, the hotkey also does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on elementary OS 0.3.1 Freya (64-bit) Quad-Core Intel® Core™ i7-4500U.&lt;/p&gt;&#xA;" OwnerUserId="2644" LastEditorUserId="34" LastEditDate="2015-10-05T18:13:08.867" LastActivityDate="2015-11-27T07:11:59.883" Title="Can't open applications menu" Tags="|release-freya|slingshot|" AnswerCount="1" CommentCount="1" ClosedDate="2015-12-31T14:06:12.310" ContentLicense="CC BY-SA 3.0" />
  <row Id="2308" PostTypeId="2" ParentId="2295" CreationDate="2015-10-04T02:10:21.727" Score="0" Body="&lt;p&gt;this is what I do when it happens to me...&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;press the power button from your PC and it'll send you to lock screen, then you can log back or restart the PC from the power menu&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;or run terminal by pressing &lt;strong&gt;Ctrl + Alt + F1&lt;/strong&gt; and try &lt;code&gt;killall wingpanel&lt;/code&gt; and press &lt;strong&gt;Ctrl + Alt + F7&lt;/strong&gt; to bring back the interface&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;if it doesn't work then go back to terminal and try &lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2603" LastActivityDate="2015-10-04T02:10:21.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2309" PostTypeId="1" CreationDate="2015-10-04T02:46:33.530" Score="1" ViewCount="47" Body="&lt;p&gt;I'm new to Linux so go easy on me, this is my first time working with Linux, after giving up completely on Windows. The nearest experience I have with Unix is my Macs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a habit of leaving my desktop pc on 24/7 with a shut down once every 2-3 months. Of course this had Windows on it in the past. I gave up with Windows 10 and decided to give Linux a try, and Elementary OS was just too beautiful to give up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I stumbled on a few problems installing but everything is fine now, it installed alright and have no problems, for the most part. Now in the settings, I've set my power option to turn off screen after 30 minutes and &lt;strong&gt;never sleep&lt;/strong&gt;. I do a lot of data transfers uploading to multiple servers for work so it does that all night and day when it had Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I noticed if I leave it on after some time, the apps on the system doesn't seem to want to start. For example, the stock apps like video, photos, calendar doesn't want to start. I've installed Chrome and that also doesn't start. Nothing starts unless I reboot the computer, and even then, sometimes the reboot button doesn't do anything and I have to reboot from the power button on my desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this is typical Linux behaviour, cause I know for a fact Linux is widely favoured by many to be used as a server. Is there a setting or something I'm doing wrong? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&#xA;After having this happen everytime I leave it idle for a long time, I've decided to turn off the &quot;Turn off screen after x hours&quot; feature to never. That alleviated the apps not opening but the next problem if I have that on is my cursor goes completely missing.&lt;/p&gt;&#xA;" OwnerUserId="2648" LastEditorUserId="2648" LastEditDate="2015-10-10T12:41:16.573" LastActivityDate="2015-10-10T12:41:16.573" Title="Can't start apps after long periods of leaving on" Tags="|release-freya|system|apps|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2310" PostTypeId="2" ParentId="2300" CreationDate="2015-10-04T05:47:23.843" Score="3" Body="&lt;p&gt;As stated voer there at &lt;a href=&quot;https://appdb.winehq.org/objectManager.php?sClass=application&amp;amp;iId=1347&quot; rel=&quot;nofollow&quot;&gt;WineHQ&lt;/a&gt; runs slightly bad on Linux. &lt;strong&gt;Noise&lt;/strong&gt; as out-of-the-box media player has the feature to sync with iDevices, as far as I know. So give it a try.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-10-04T05:47:23.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2311" PostTypeId="2" ParentId="2306" CreationDate="2015-10-04T06:09:47.517" Score="1" Body="&lt;p&gt;Let's assume your account is Alice, and your duplicated account should be Bob. Sorry, my screenshots are in German, but I will explain it in English.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Create the second account Bob by using System preferences (&lt;code&gt;switchboard&lt;/code&gt;), &lt;code&gt;user&lt;/code&gt; plug. Add name Bob, the password and so on. After that, login with this user to create the home folder (will be found in &lt;code&gt;/home/bob/&lt;/code&gt;). &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Start &lt;code&gt;Files&lt;/code&gt; as admin (please be aware that working with root privileges could be dangerous) by typing in terminal: &lt;code&gt;gksudo pantheon-files&lt;/code&gt;. Please type your password. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Find the two home folders of Alice and Bob (&lt;code&gt;/home/alice/&lt;/code&gt; and &lt;code&gt;/home/bob/&lt;/code&gt;). Type &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt; to see hidden files. &lt;/li&gt;&#xA;&lt;li&gt;Copy all folders beginning with &lt;code&gt;.&lt;/code&gt; from Alice's home folder to Bob's home folder.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Going with this, your accounts now have the same settings, after new login.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-10-04T06:09:47.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2312" PostTypeId="2" ParentId="2263" CreationDate="2015-10-04T07:53:03.447" Score="1" Body="&lt;p&gt;I think there is no such functionality. If you want to have such an function, feel free to file an issue over there in Launchpad: &lt;a href=&quot;https://bugs.launchpad.net/scratch/+filebug&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/scratch/+filebug&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-10-04T07:53:03.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2313" PostTypeId="1" AcceptedAnswerId="2314" CreationDate="2015-10-04T08:05:38.800" Score="1" ViewCount="847" Body="&lt;p&gt;I have changed my Plank theme using elementary Tweaks, but there doesn't exist the default theme option. My question is, how can I get back to the stock Plank theme?&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2015-10-05T15:47:51.277" Title="Change Plank theme back to default" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2314" PostTypeId="2" ParentId="2313" CreationDate="2015-10-04T08:09:32.363" Score="1" Body="&lt;p&gt;I got it working. Had to click &quot;revert to default&quot; button.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2015-10-04T08:09:32.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2315" PostTypeId="2" ParentId="2295" CreationDate="2015-10-04T08:12:03.097" Score="0" Body="&lt;p&gt;Probably not what the OP wants, but still good to know:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can hard reset your computer by pressing Alt+Shift+SysRq (often this is a combinaion Fn+PrintScreen)+B. This is useful if nothing else helps.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastEditorUserId="3177" LastEditDate="2015-11-22T23:23:49.813" LastActivityDate="2015-11-22T23:23:49.813" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2316" PostTypeId="1" AcceptedAnswerId="2393" CreationDate="2015-10-04T09:56:56.727" Score="0" ViewCount="1216" Body="&lt;p&gt;Don't know how to uninstall Maya Calendar? It doesn't show up in the software center if I search. Only thing that pops up under installed is Evolution Data Server which I uninstalled but still maya calendar is available under applications.&#xA;Any Suggestions?&#xA;(Am not happy with Geary and Maya since I need integration between my mail client and my calendar, most important I need be able to create events out of a mail. Best would be with date recognition and that the event refers back to the mail - Mac Os x features, which where important parts of my work-flow on my hackintosh. Would love to stick with elementary, but this is really missing. Will try now with thunderbird)&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2017-04-21T12:29:52.893" Title="Maya Calendar Uninstall" Tags="|calendar|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2317" PostTypeId="1" CreationDate="2015-10-04T10:43:52.730" Score="2" ViewCount="70" Body="&lt;p&gt;In my daily work-flow, I need to create events out of mails. (Meaning I can right click on the mail and have the option to create an event out of it). Best with date recognition (meaning while creating the event, dates that are found in mails are suggested as event dates) an that the created events refer back to the mails (meaning I can click on a link in the event and the mail opens in Geary).&#xA;Both possible under Mac Os x on my hackintosh.&#xA;Any suggestion how to set that up?&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2015-10-04T10:43:52.730" Title="maya geary integration" Tags="|pantheon-mail|calendar|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-28T19:00:54.033" ContentLicense="CC BY-SA 3.0" />
  <row Id="2318" PostTypeId="1" CreationDate="2015-10-04T10:57:05.990" Score="5" ViewCount="466" Body="&lt;p&gt;I'm currently trying to set up an access point in my lounge, using my Sony Vaio with elementary OS installed. I have successfully created an access point &amp;amp; can connect to the Internet that way using the network GUI, but it doesn't work when a password is set (another issue) and creates a new network (i.e. runs it's own DHCP server).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I want to achieve is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS receives internet connection over eth0&lt;/li&gt;&#xA;&lt;li&gt;Creates wifi access point using wifi card (wlan0) without creating a new network (i.e. no DHCP)&lt;/li&gt;&#xA;&lt;li&gt;Passes traffic from wlan0 to eth0, so that all devices connected to the access point on wlan0 get their IP address from the router (connected via eth0).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Any idea how this can be done? I've been playing around with brctl with limited success at the moment.&lt;/p&gt;&#xA;" OwnerUserId="2651" LastEditorUserId="45" LastEditDate="2015-10-05T18:09:08.467" LastActivityDate="2015-12-26T12:06:30.590" Title="Bridge wlan0 to eth0 without DHCP" Tags="|settings|wifi|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2319" PostTypeId="2" ParentId="2316" CreationDate="2015-10-04T13:29:28.900" Score="1" Body="&lt;p&gt;run this in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge maya-calendar &amp;amp;&amp;amp; sudo apt-get autoremove&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-04T13:29:28.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2320" PostTypeId="2" ParentId="2279" CreationDate="2015-10-04T14:54:47.920" Score="0" Body="&lt;p&gt;Have managed to fix the issue by installing virtualbox directly from their website as suggested above (Thanks).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After install the ICon was incorrect and did not appear in applications drop down but a reboot fixed this issue too. Virtualbox now appears in System tools drop-down and works correctly.&lt;/p&gt;&#xA;" OwnerUserId="2626" LastActivityDate="2015-10-04T14:54:47.920" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2322" PostTypeId="2" ParentId="2313" CreationDate="2015-10-04T21:28:19.153" Score="3" Body="&lt;p&gt;To facilitate switching in the future you can add a default theme to the list: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.local/share/plank/themes&#xA;ln -s /usr/share/themes/elementary/plank ~/.local/share/plank/themes/Pantheon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, the default theme will be named &lt;code&gt;Pantheon&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-04T21:28:19.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2324" PostTypeId="2" ParentId="2307" CreationDate="2015-10-05T00:53:19.937" Score="12" Body="&lt;p&gt;I've encountered this problem before: it's caused by slingshot crashing while backgrounded. There is a very easy way to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal, either from plank or by using the shortcut [super] + [T] and enter: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pkill slingshot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next time you click the applications indicator slingshot will restart and work as normal.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2015-10-05T00:53:19.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2325" PostTypeId="1" CreationDate="2015-10-05T06:18:03.987" Score="2" ViewCount="443" Body="&lt;p&gt;I was having allot of difficulty trying to update the version of MonoDevelop that is available for elementary OS Freya. I was trying to run these commands to get it done:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF&#xA; echo &quot;deb http://download.mono-project.com/repo/debian wheezy main&quot; | sudo tee /etc/apt/sources.list.d/mono-xamarin.list&#xA; sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For some reason the &lt;code&gt;sudo tee /etc/apt/sources.list.d/mono-xamarin.list&lt;/code&gt; command would not copy the &lt;code&gt;echo&lt;/code&gt; line into the &lt;code&gt;mono-xamarin.list&lt;/code&gt; file even though I was using the &lt;code&gt;sudo&lt;/code&gt; command. So five hours later and hundreds of searches on Google, it finally hit me to try to just add the line by copying and pasting it directly into the file. Of course I had to open my file manager as root in order to do this. After long hours figuring this out I finally got my MonoDevelop updated to the latest one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why did the &lt;code&gt;sudo tee&lt;/code&gt; command not work to copy the &lt;code&gt;echo&lt;/code&gt; line into the &lt;code&gt;mono-xamarin.list&lt;/code&gt; file? &lt;/p&gt;&#xA;" OwnerUserId="2657" LastEditorUserId="3757" LastEditDate="2016-04-23T12:06:15.423" LastActivityDate="2016-04-23T12:06:15.423" Title="Updating MonoDevelop to 5.9.6" Tags="|release-freya|pantheon-terminal|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-28T20:35:33.350" ContentLicense="CC BY-SA 3.0" />
  <row Id="2326" PostTypeId="1" CreationDate="2015-10-05T08:32:29.670" Score="1" ViewCount="99" Body="&lt;p&gt;I lost eth0 after the last update. Output of &lt;code&gt;cat /etc/lsb-release&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=&quot;elementary OS&quot;&#xA;DISTRIB_RELEASE=0.2.1&#xA;DISTRIB_CODENAME=luna&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS Luna&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Output of `uname -r&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;3.2.0-91-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;ifconfig&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lo        Link encap:Boucle locale  &#xA;          inet adr:127.0.0.1  Masque:255.0.0.0&#xA;          adr inet6: ::1/128 Scope:Hôte&#xA;          UP LOOPBACK RUNNING  MTU:16436  Metric:1&#xA;          Packets reçus:1715 erreurs:0 :0 overruns:0 frame:0&#xA;          TX packets:1715 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 lg file transmission:0 &#xA;          Octets reçus:179306 (179.3 KB) Octets transmis:179306 (179.3 KB)&#xA;&#xA;wlan1     Link encap:Ethernet  HWaddr 30:12:b3:89:5a:49  &#xA;          inet adr:192.168.0.13  Bcast:192.168.0.255  Masque:255.255.255.0&#xA;          adr inet6: fe80::3210:b3ff:fe69:5a49/64 Scope:Lien&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          Packets reçus:5472 erreurs:0 :0 overruns:0 frame:0&#xA;          TX packets:5341 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 lg file transmission:1000 &#xA;          Octets reçus:3705285 (3.7 MB) Octets transmis:895453 (895.4 KB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where's &lt;code&gt;eth0&lt;/code&gt;???&lt;/p&gt;&#xA;" OwnerUserId="2659" LastEditorUserId="3757" LastEditDate="2016-04-23T12:05:25.627" LastActivityDate="2019-01-22T15:47:31.220" Title="Loss eth0 after update" Tags="|networking|" AnswerCount="0" CommentCount="2" ClosedDate="2019-02-20T01:37:58.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="2327" PostTypeId="1" AcceptedAnswerId="2379" CreationDate="2015-10-05T12:54:54.117" Score="5" ViewCount="202" Body="&lt;p&gt;I currently reinstalled Freya 0.3.1 on my notebook as I still have been using the beta. Now, I can't get Dropbox to work again (was working fine before). I tried downloading the .deb file from the website and install it with dpkg as well as adding the dropbox repository manually and installing dropbox using apt-get. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't matter how I install it, when I start dropbox with &lt;code&gt;dropbox start -i&lt;/code&gt; I get a &lt;code&gt;Aborted (core dumped)&lt;/code&gt;. Anybody an idea what the problem could be? &lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2015-10-09T12:51:20.017" Title="Dropbox not working in fresh Freya 0.3.1 installation" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2329" PostTypeId="1" AcceptedAnswerId="2331" CreationDate="2015-10-05T16:41:58.240" Score="4" ViewCount="3389" Body="&lt;p&gt;I have no clue as to how can I play my music collection in shuffle mode.&lt;/p&gt;&#xA;" OwnerUserId="2662" LastEditorUserId="2662" LastEditDate="2015-10-10T15:51:21.800" LastActivityDate="2020-03-31T10:20:43.727" Title="How to shuffle the music in the default music player?" Tags="|music|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2330" PostTypeId="2" ParentId="2288" CreationDate="2015-10-05T16:59:27.343" Score="1" Body="&lt;p&gt;I believe it is not possible, in current version of &lt;code&gt;pantheon-terminal&lt;/code&gt;, to have multiple &quot;user profiles&quot;, what I believe is the &quot;preferences&quot; you're asking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you really need it, a good option is the &lt;code&gt;gnome-terminal&lt;/code&gt; that have this feature. (and it's written in gtk so it doesn't look too diferent from the rest of elementary OS)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just install via &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-terminal -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change your preferences in &lt;code&gt;Edit &amp;gt; Profile Preferences&lt;/code&gt; menu. Save multiple preferences in &lt;code&gt;Edit &amp;gt; Profiles...&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to use it as the default terminal, run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternative --config x-terminal-emulator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and select it from the list.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="34" LastEditDate="2015-11-19T13:37:45.007" LastActivityDate="2015-11-19T13:37:45.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2331" PostTypeId="2" ParentId="2329" CreationDate="2015-10-05T18:11:27.657" Score="6" Body="&lt;p&gt;In the bottom left corner of Music, you will see an icon that looks like two straight arrows on top of each other. If you click that icon, the arrows will cross. Your music will now be shuffled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/f60LB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/f60LB.png&quot; alt=&quot;Screenshot of shuffle icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-05T18:11:27.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2332" PostTypeId="1" CreationDate="2015-10-05T18:46:10.687" Score="5" ViewCount="10797" Body="&lt;p&gt;I have tried a few Ubuntu distributions where python comes pre-installed, therefore having some problems in package management during the development processes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some Linux distributions include Python on default. Does elementary OS have that, or is it coming Python-free?&lt;/p&gt;&#xA;" OwnerUserId="2664" LastEditorUserId="9" LastEditDate="2015-10-08T14:58:36.267" LastActivityDate="2015-10-11T06:16:02.290" Title="Is Python pre-installed on elementary OS?" Tags="|system-installation|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2333" PostTypeId="2" ParentId="2332" CreationDate="2015-10-05T20:04:12.223" Score="5" Body="&lt;p&gt;Yes, it does come installed by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal session (press &lt;code&gt;Supr+t&lt;/code&gt; or search for &lt;em&gt;terminal&lt;/em&gt; in Slingshot) and enter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ python&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will give you access to Python 2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to work with Python 3, the command is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ python3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="9" LastEditDate="2015-10-08T15:02:36.410" LastActivityDate="2015-10-08T15:02:36.410" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2335" PostTypeId="1" CreationDate="2015-10-05T22:13:09.567" Score="2" ViewCount="317" Body="&lt;p&gt;I've gotten the install to boot, but now that the desktop is up, I can only interface through the touchscreen.&#xA;Drivers have not yet been installed for the WiFi card, mouse, or keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to easily access these drivers or where to begin looking for them?&lt;/p&gt;&#xA;" OwnerUserId="2667" LastEditorUserId="3757" LastEditDate="2016-04-23T12:03:42.330" LastActivityDate="2016-06-22T17:00:41.313" Title="Minor support for Surface Pro 3" Tags="|drivers|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2337" PostTypeId="1" AcceptedAnswerId="2358" CreationDate="2015-10-06T01:01:15.563" Score="8" ViewCount="457" Body="&lt;p&gt;I've encountered something when using Pantheon Terminal. Normally, I expect &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt; to delete the character at point if there is one, else if there aren't any characters on the line, send &lt;code&gt;EOF&lt;/code&gt; (standard bash keyboard shortcut). However, it &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/981/list-of-keyboard-shortcuts-for-terminal&quot;&gt;looks like&lt;/a&gt; the standard keyboard shortcuts for &lt;code&gt;pantheon-terminal&lt;/code&gt; include &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt; to directly close the current tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My shell is set to &lt;code&gt;/bin/bash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; env | grep -i shell&#xA;SHELL=/bin/bash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and I've checked for options using &lt;code&gt;dconf-editor&lt;/code&gt; under &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt; and couldn't find anything to help create the behavior I expect. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I disable &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt; closing the terminal tab so I that it behaves how I expect it to?&lt;/p&gt;&#xA;" OwnerUserId="2670" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-07T07:46:32.560" Title="How can I make Ctrl+D not close the tab in Pantheon Terminal?" Tags="|keyboard-shortcuts|pantheon-terminal|bash|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2339" PostTypeId="2" ParentId="1283" CreationDate="2015-10-06T04:05:21.360" Score="7" Body="&lt;p&gt;You can swap &lt;kbd&gt;Ctrl&lt;/kbd&gt; and &lt;kbd&gt;⌘&lt;/kbd&gt; for most contexts with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.input-sources xkb-options &quot;['ctrl:swap_lwin_lctl']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Alternatively, if you want to use a GUI to make the same change:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install dconf-tools from the software center&lt;/li&gt;&#xA;&lt;li&gt;run the dconf-editor application&lt;/li&gt;&#xA;&lt;li&gt;navigate to org &gt; gnome &gt; desktop &gt; input sources&lt;/li&gt;&#xA;&lt;li&gt;change the value of kbd-options to ['ctrl:swap_lwin_lctl']&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That should take care of most shortcuts. The shortcut to switch windows can be changed from &lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;Tab&lt;/kbd&gt; to something else on the standard keyboard shortcuts page in System Settings.&lt;/p&gt;&#xA;" OwnerUserId="2416" LastEditorUserId="308" LastEditDate="2019-12-06T07:03:27.213" LastActivityDate="2019-12-06T07:03:27.213" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="2340" PostTypeId="1" CreationDate="2015-10-06T04:13:05.127" Score="1" ViewCount="1300" Body="&lt;p&gt;i started the syndaemon like this to enable &lt;strong&gt;disable while typing&lt;/strong&gt; option &lt;code&gt;syndaemon -i 1 -d&lt;/code&gt; but after that &lt;strong&gt;natural scrolling&lt;/strong&gt; doesn't work, so how do i get both to work? Thanks for your help.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-10T22:45:10.657" Title="elementary os natural scrolling disabled when disable while typing is on?" Tags="|system|touchpad|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2341" PostTypeId="2" ParentId="2340" CreationDate="2015-10-06T04:35:38.907" Score="1" Body="&lt;p&gt;In the System Settings app there is a section called &quot;Mouse and Touchpad&quot; which contains check boxes for both &quot;Disable while typing&quot; and &quot;Natural Scrolling&quot;. Checking both of these options seems to be at least a partial solution as it disables scrolling while typing (the mouse pointer continues to work) and preserves natural scrolling.&lt;/p&gt;&#xA;" OwnerUserId="2416" LastActivityDate="2015-10-06T04:35:38.907" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2342" PostTypeId="1" CreationDate="2015-10-06T08:07:26.877" Score="0" ViewCount="689" Body="&lt;p&gt;i have installed VLC and I want to use this theme : &#xA;&lt;a href=&quot;http://maverick07x.deviantart.com/art/VLC-MinimalX-385698882&quot; rel=&quot;nofollow&quot;&gt;VLC - MinimalX by Maverick07x on DeviantArt&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I choose the theme from preferences its ok and the theme changes but the problem is when I want to view playlist or change sound volume after clicking on the icon it will open the playlist in another window &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like if you press &lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; key you will see two instances of VLC 1 is the main vlc app and the other is just the playlist window&lt;/p&gt;&#xA;&#xA;&lt;p&gt;**NOTE:**I tested this theme on Ubuntu 15 and Windows And it works find when you click on playlist icon it does not open another window&lt;/p&gt;&#xA;" OwnerUserId="2672" LastEditorUserId="3757" LastEditDate="2016-04-25T01:50:11.820" LastActivityDate="2016-04-25T01:50:11.820" Title="Problem with VLC minimal X theme on freya OS" Tags="|themes|vlc|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2343" PostTypeId="1" AcceptedAnswerId="2348" CreationDate="2015-10-06T12:37:25.880" Score="3" ViewCount="1015" Body="&lt;p&gt;I recently installed the gnome-terminal and removed pantheon-terminal. Now The 'Open in &gt; Terminal' in context menu is no longer working. How can I use that option to open the current directory in gnome-terminal?&lt;/p&gt;&#xA;" OwnerUserId="2674" LastEditorUserId="5565" LastEditDate="2016-10-06T02:38:42.020" LastActivityDate="2016-10-06T02:38:42.020" Title="How do I open a directory in gnome-terminal using context menu?" Tags="|pantheon-files|gnome-terminal|context-menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2344" PostTypeId="1" CreationDate="2015-10-06T14:48:01.457" Score="9" ViewCount="431" Body="&lt;p&gt;Thank you for your great work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have some problems since elementary OS 0.3.1 makes &lt;code&gt;pantheon-filechooser-module&lt;/code&gt; as the default one. I suppose there is maybe a GObject/Gtk/pixman issue because I can reproduce it with this &lt;a href=&quot;http://python-gtk-3-tutorial.readthedocs.org/en/latest/dialogs.html#id2&quot; rel=&quot;nofollow&quot;&gt;python script&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ python3 the_script.py&#xA;*** BUG ***&#xA;In pixman_region32_init_rect: Invalid rectangle passed&#xA;Set a breakpoint on '_pixman_log_error' to debug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, either click on &quot;Choose File&quot; or &quot;Choose Folder&quot;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(the_script.py:4167): Gtk-CRITICAL **: gtk_container_add: assertion 'GTK_IS_CONTAINER (container)' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and more annoying it breaks &lt;a href=&quot;https://github.com/gramps-project/gramps/releases/download/gramps-4.2.0/python3-gramps_4.2.0_all.deb&quot; rel=&quot;nofollow&quot;&gt;Gramps 4.2.0&lt;/a&gt; where&#xA;Gtk3 FileChooserDialog is called on many modules. (&lt;code&gt;git&lt;/code&gt;, &lt;code&gt;grep&lt;/code&gt;, etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &quot;visual&quot; issue is that without widget action buttons (OK, Cancel)&#xA;into the File Chooser Dialog or any header bar, we cannot close the &#xA;dialog and we need to kill the application. Really annoying into Gramps,&#xA;where I cannot import file, select a backup folder, set preferred folder,&#xA;import any media object, etc ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should be able to test and patch gramps but I have no idea how&#xA;to properly migrate or fix current python3 modules &#xA;calling Gtk3 FileChooserDialog under recent pantheon shell &#xA;(elementary OS 0.3.1).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue or tips will be welcome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards,&lt;/p&gt;&#xA;" OwnerUserId="2678" LastEditorUserId="3757" LastEditDate="2016-04-24T06:07:07.997" LastActivityDate="2016-04-24T06:07:07.997" Title="How to move a python3/gtk3 application to new 'pantheon-filechooser-module'?" Tags="|pantheon-files|programming|python|" AnswerCount="0" CommentCount="5" ClosedDate="2016-10-21T20:51:50.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="2345" PostTypeId="1" CreationDate="2015-10-06T15:36:09.630" Score="1" ViewCount="868" Body="&lt;p&gt;I have installed Freya on Parallels 11 VM on a MacBook Pro with Retina display. The VM has Video memory set at 256M 3D graphics. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation goes well with screen resolution at 1920x1280! but when it goes to reboot at the end of the installation  it hangs on  mount: / busy&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to reset the VM and then when I boot the display goes to 800x600 and the display setup in settings only shows 800x600 as available resolutions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I reboot and interrupt the boot and boot from the selection of choices, it switches to 1920 by 1280 again and I can select 1920x1280 or a number of choices in the display settings and it looks awesome (text is tiny but that can be dealt with).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reboot it goes back to the 800x600 resolution and throws an error window up with the message:&#xA;Could not apply the stored configuration for monitors&#xA;none of the selected modes were compatible with the possible modes:&#xA;Trying modes for CRTC 378&#xA;CRTC 378: trying mode 800x600@75Hz with output at &#xA;1920x1200@0Hz (pass 0)&#xA;CRTC 378:trying mode 800x600@75Hz with output at &#xA;1920x1200@0Hz (pass 0)&lt;/p&gt;&#xA;" OwnerUserId="2671" LastEditorUserId="2671" LastEditDate="2015-10-06T15:52:28.560" LastActivityDate="2015-10-07T17:30:47.437" Title="Freya on Parallels on MacBook Pro with Retina keeps reverting to 800x600" Tags="|release-freya|display|macbook|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2346" PostTypeId="2" ParentId="2300" CreationDate="2015-10-06T15:42:15.027" Score="0" Body="&lt;p&gt;Well... I have also tried severel times to make iTunes work and sadly it's kind of pointless. But I found a somewhat good solution I guess. If you need to sync your i devices than just make a virtual box running Windows or Mac and install iTunes in that. And you can even do seamless mode if you are really wanting that ;)&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2015-10-06T15:42:15.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2347" PostTypeId="2" ParentId="2108" CreationDate="2015-10-06T16:51:37.470" Score="3" Body="&lt;p&gt;I see the same issue with Multi-Tasking view. &#xA;Instead I have configured a hot corner to &quot;Show All Windows&quot; and it works beautifully across 2 monitors:&#xA;Applications -&gt; System Tools -&gt; System Settings -&gt; Desktop -&gt; Hot corners&lt;/p&gt;&#xA;" OwnerUserId="2681" LastActivityDate="2015-10-06T16:51:37.470" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2348" PostTypeId="2" ParentId="2343" CreationDate="2015-10-06T17:24:43.367" Score="2" Body="&lt;p&gt;This is a function of Terminal itself. Pantheon Terminal makes Files aware that it is available to handle directories through a .desktop file. GNOME Terminal would have to supply a .desktop file that would indicate to Files that it handles directories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may be able to work around this by creating your own .desktop file for GNOME Terminal and placing it in &lt;code&gt;$PREFIX/share/applications&lt;/code&gt; (Where $PREFIX is &lt;code&gt;/usr&lt;/code&gt; or &lt;code&gt;/usr/local&lt;/code&gt;). This is the contents of the .desktop file that Pantheon Terminal supplies for this purpose:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Terminal&#xA;TryExec=pantheon-terminal&#xA;Exec=pantheon-terminal -w %u&#xA;Icon=utilities-terminal&#xA;Type=Application&#xA;StartupNotify=true&#xA;X-GNOME-Gettext-Domain=pantheon-terminal&#xA;NoDisplay=true&#xA;MimeType=inode/directory;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notice specifically the &lt;code&gt;Exec&lt;/code&gt; line. If GNOME Terminal is able to accept directories as a command line argument, this is where you would modify the .desktop file to have it work with GNOME Terminal instead of Pantheon Terminal.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-06T17:24:43.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2349" PostTypeId="2" ParentId="2342" CreationDate="2015-10-06T17:29:34.277" Score="1" Body="&lt;p&gt;I guess the answer is probably that you should not use this theme. You may want to seek help from a VLC specific forum. Generally if a specific app is doing something odd, it's the fault of that app. In this case, it's only with a specific mod to that specific app. So that theme is probably just not compatible. &lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-06T17:29:34.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2350" PostTypeId="1" AcceptedAnswerId="2354" CreationDate="2015-10-06T21:07:13.073" Score="1" ViewCount="350" Body="&lt;p&gt;As it says in title. Plank currently will zoom to fit the width of my screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know exactly when this started, but I remember installing some updates before shutting the lid on my laptop placing the laptop in hibernation. On opening the lid this is what I found:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/smYI7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/smYI7.jpg&quot; alt=&quot;Screenshot of Plank in full width.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see from the screenshot I have tried restarting Plank a number of times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="569" LastActivityDate="2015-10-07T00:22:10.830" Title="Plank has zoomed to fit screen width after recent update" Tags="|release-freya|plank|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2351" PostTypeId="1" AcceptedAnswerId="2353" CreationDate="2015-10-06T21:13:55.870" Score="-1" ViewCount="716" Body="&lt;p&gt;I just installed elementary and the theme is totally broken! Check out the screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a home directory that has been used in a number of past OS installs including old versions of elementary, ubuntu, mint, and mate-flavored mint.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I figured this is probably the cause, but I can't find a way to reset the theme to the OS defaults.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problems:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;missing app icons (video, music)&lt;/li&gt;&#xA;&lt;li&gt;ugly title bar&lt;/li&gt;&#xA;&lt;li&gt;weird colors&lt;/li&gt;&#xA;&lt;li&gt;weird status bar icons&#xA;&lt;a href=&quot;https://i.stack.imgur.com/aL8Zl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aL8Zl.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2683" LastEditorUserId="596" LastEditDate="2016-11-01T18:50:51.083" LastActivityDate="2021-05-15T10:48:51.653" Title="elementary OS theme is broken right after install (using an existing home dir)" Tags="|themes|user-interface|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2352" PostTypeId="1" CreationDate="2015-10-06T22:25:51.863" Score="2" ViewCount="83" Body="&lt;p&gt;I have an 'Unknown' app in my Notifications, how would I figure out what this is? I am currently using Freya 0.3.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/e5xlN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/e5xlN.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2684" LastActivityDate="2015-10-06T22:25:51.863" Title="What is 'Unknown' in Notifications?" Tags="|release-freya|notifications|" AnswerCount="0" CommentCount="0" ClosedDate="2015-11-29T01:19:34.757" ContentLicense="CC BY-SA 3.0" />
  <row Id="2353" PostTypeId="2" ParentId="2351" CreationDate="2015-10-06T22:31:09.443" Score="0" Body="&lt;p&gt;Have you tried installing &lt;code&gt;elementary-tweaks&lt;/code&gt; and changing the theme from there?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have elementary tweaks installed, goto &lt;code&gt;system settings-&amp;gt;tweaks&lt;/code&gt; and from there you can change the &lt;code&gt;GTK+ Theme&lt;/code&gt; to &lt;code&gt;elementary&lt;/code&gt;. You will also need to change the &lt;code&gt;Icon Theme&lt;/code&gt; to &lt;code&gt;elementary&lt;/code&gt; as well. There's probably a way to change the theme without having to install elementary-tweaks but I wouldn't know how.&lt;/p&gt;&#xA;" OwnerUserId="2684" LastActivityDate="2015-10-06T22:31:09.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2354" PostTypeId="2" ParentId="2350" CreationDate="2015-10-07T00:22:10.830" Score="2" Body="&lt;p&gt;I'm not sure what caused this on your system, but it looks like you've set the icon size to something enormous, try scaling down the icons by putting your mouse over the plank and using [ctrl] + [scrollwheel].&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if that doesn't work try entering &lt;code&gt;plank --preferences&lt;/code&gt; into slingshot or a terminal and tweaking the settings yourself: the two you'll be interested in are icon size which has a default of 48px and alignment which should be on center not fill.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2015-10-07T00:22:10.830" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2355" PostTypeId="1" CreationDate="2015-10-07T05:49:11.450" Score="1" ViewCount="269" Body="&lt;p&gt;For some reason both my super keys aren't working. I tried going to &lt;code&gt;system settings-&amp;gt;keyboard-&amp;gt;options&lt;/code&gt; but I don't see any options in &lt;code&gt;Alt/Win key behavior&lt;/code&gt; that says &lt;code&gt;Super&lt;/code&gt; in it. Just &lt;code&gt;Meta&lt;/code&gt; and &lt;code&gt;Hyper&lt;/code&gt;. Not sure what those keys even mean.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B75bc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B75bc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2684" LastEditorUserId="3757" LastEditDate="2016-04-23T12:03:16.343" LastActivityDate="2016-04-23T12:03:16.343" Title="Both Windows + L and Windows + R keys are not working" Tags="|release-freya|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ClosedDate="2019-12-08T04:22:28.307" ContentLicense="CC BY-SA 3.0" />
  <row Id="2358" PostTypeId="2" ParentId="2337" CreationDate="2015-10-07T07:46:32.560" Score="8" Body="&lt;p&gt;You can disable save-exited-tabs and then &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt; can be used for bash. Just run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings save-exited-tabs false&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-10-07T07:46:32.560" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2359" PostTypeId="1" CreationDate="2015-10-07T09:57:08.643" Score="1" ViewCount="275" Body="&lt;p&gt;I would install wine. but by installing dependency packages, my Touchpad driver uninstalled automatically. so I try install it (Driver) again. but after reboot, system wasn't boot and stuck at black screen. If you think this is not bug, please just tell me how can I install Wine, without disabling ALPS-Touch-pad driver?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for more details, you can see this logs.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install wine &#xA;[sudo] password for hamed: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA; wine : Depends: wine1.6 but it is not going to be installed&#xA; E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install wine1.6 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;   wine1.6 : Depends: wine1.6-i386 (= 1:1.6.2-0ubuntu4)&#xA;            Recommends: winbind but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install  wine1.6-i386 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;    wine1.6-i386:i386 : Depends: libglu1-mesa:i386 but it is not going to be installed or&#xA;                          libglu1:i386&#xA;                 Recommends: libosmesa6:i386 but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install libglu1 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Note, selecting 'libglu1-mesa' instead of 'libglu1'&#xA;libglu1-mesa is already the newest version.&#xA;libglu1-mesa set to manually installed.&#xA;The following packages were automatically installed and are no longer required:      &#xA; efibootmgr libatkmm-1.6-1 libcairomm-1.0-1 libglibmm-2.4-1c2a&#xA; libpangomm-1.4-1 libsigc++-2.0-0c2a libtimezonemap1 sbsigntool secureboot-db&#xA; Use 'apt-get autoremove' to remove them.&#xA; 0 upgraded, 0 newly installed, 0 to remove and 22 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install libosmesa6 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;   libosmesa6 : Depends: libglapi-mesa (= 10.1.3-0ubuntu0.4)&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install libglapi-mesa &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;  libcogl15 : Depends: libgbm1 (&amp;gt;= 8.1~0) but it is not going to be installed&#xA;         Depends: libwayland-egl1-mesa (&amp;gt;= 10.0.2) or&#xA;                  libwayland-egl1&#xA;libegl1-mesa : Depends: libgbm1 (&amp;gt;= 7.11~1) but it is not going to be installed&#xA;            Recommends: libegl1-mesa-drivers&#xA;E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install libegl1-mesa-drivers &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA; efibootmgr libatkmm-1.6-1 libcairomm-1.0-1 libglibmm-2.4-1c2a&#xA; libpangomm-1.4-1 libsigc++-2.0-0c2a libtimezonemap1 sbsigntool secureboot-db&#xA; Use 'apt-get autoremove' to remove them.&#xA;   The following extra packages will be installed:&#xA;      libegl1-mesa libgl1-mesa-dri libgl1-mesa-glx libglamor0 libglapi-mesa&#xA;      libgles2-mesa libllvm3.4 libopenvg1-mesa libspice-server1&#xA;      libwayland-egl1-mesa xserver-xorg xserver-xorg-core xserver-xorg-input-evdev&#xA;      xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev&#xA;      xserver-xorg-video-glamoregl xserver-xorg-video-intel&#xA;      xserver-xorg-video-mach64 xserver-xorg-video-mga&#xA;      xserver-xorg-video-modesetting xserver-xorg-video-neomagic&#xA;      xserver-xorg-video-nouveau xserver-xorg-video-openchrome&#xA;      xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon&#xA;      xserver-xorg-video-s3 xserver-xorg-video-savage&#xA;      xserver-xorg-video-siliconmotion xserver-xorg-video-sis&#xA;      xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident&#xA;      xserver-xorg-video-vesa&#xA;Suggested packages:&#xA;    libglide3 xfonts-100dpi xfonts-75dpi firmware-linux&#xA;The following packages will be REMOVED:&#xA;    libegl1-mesa-lts-vivid libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;    libgl1-mesa-glx-lts-vivid libglapi-mesa-lts-vivid libgles1-mesa-lts-vivid&#xA;    libgles2-mesa-lts-vivid libwayland-egl1-mesa-lts-vivid&#xA;    libxatracker2-lts-vivid xserver-xorg-core-lts-vivid&#xA;    xserver-xorg-input-all-lts-vivid xserver-xorg-input-evdev-lts-vivid&#xA;    xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid&#xA;    xserver-xorg-input-vmmouse-lts-vivid xserver-xorg-input-wacom-lts-vivid&#xA;    xserver-xorg-lts-vivid xserver-xorg-video-all-lts-vivid&#xA;    xserver-xorg-video-ati-lts-vivid xserver-xorg-video-cirrus-lts-vivid&#xA;    xserver-xorg-video-fbdev-lts-vivid xserver-xorg-video-intel-lts-vivid&#xA;    xserver-xorg-video-mach64-lts-vivid xserver-xorg-video-mga-lts-vivid&#xA;    xserver-xorg-video-neomagic-lts-vivid xserver-xorg-video-nouveau-lts-vivid&#xA;    xserver-xorg-video-openchrome-lts-vivid xserver-xorg-video-r128-lts-vivid&#xA;    xserver-xorg-video-radeon-lts-vivid xserver-xorg-video-savage-lts-vivid&#xA;    xserver-xorg-video-siliconmotion-lts-vivid&#xA;    xserver-xorg-video-sisusb-lts-vivid xserver-xorg-video-tdfx-lts-vivid&#xA;    xserver-xorg-video-trident-lts-vivid xserver-xorg-video-vesa-lts-vivid&#xA;    xserver-xorg-video-vmware-lts-vivid&#xA;The following NEW packages will be installed:&#xA;   libegl1-mesa libegl1-mesa-drivers libgl1-mesa-dri libgl1-mesa-glx libglamor0&#xA;   libglapi-mesa libgles2-mesa libllvm3.4 libopenvg1-mesa libspice-server1&#xA;   libwayland-egl1-mesa xserver-xorg xserver-xorg-core xserver-xorg-input-evdev&#xA;   xserver-xorg-video-ati xserver-xorg-video-cirrus xserver-xorg-video-fbdev&#xA;   xserver-xorg-video-glamoregl xserver-xorg-video-intel&#xA;   xserver-xorg-video-mach64 xserver-xorg-video-mga&#xA;   xserver-xorg-video-modesetting xserver-xorg-video-neomagic&#xA;   xserver-xorg-video-nouveau xserver-xorg-video-openchrome&#xA;   xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon&#xA;  xserver-xorg-video-s3 xserver-xorg-video-savage&#xA;  xserver-xorg-video-siliconmotion xserver-xorg-video-sis&#xA;  xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident&#xA;  xserver-xorg-video-vesa&#xA;0 upgraded, 36 newly installed, 36 to remove and 22 not upgraded.&#xA;Need to get 17.7 MB of archives.&#xA;After this operation, 51.1 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n]   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;At this point, I could Install Wine, successfully. but after reboot, Touch-pad Driver was disabled.     &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For fix that, I try to install one of two related packages that was removed since installing wine. but after reboot, system stuck at the black screen and didn't boot.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; hamed@Hamed-PC:~$ sudo apt-get install xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;   xserver-xorg-input-mouse-lts-vivid : Depends: xorg-input-abi-21&#xA;                                  Depends: xserver-xorg-core-lts-vivid (&amp;gt;= 2:1.16.99.901) but it is not going to be installed&#xA;   xserver-xorg-input-synaptics-lts-vivid : Depends: xorg-input-abi-21&#xA;                                      Depends: xserver-xorg-core-lts-vivid (&amp;gt;= 2:1.16.99.901) but it is not going to be installed&#xA; E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install xorg-input-abi-21 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package xorg-input-abi-21 is a virtual package provided by:&#xA;   xserver-xorg-core-lts-vivid 2:1.17.1-0ubuntu3~trusty1&#xA;   xserver-xorg-core-lts-utopic 2:1.16.0-1ubuntu1.2~trusty2&#xA;You should explicitly select one to install.&#xA;E: Package 'xorg-input-abi-21' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install xserver-xorg-core-lts-vivid&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;   efibootmgr gnome-power-manager gucharmap indicator-keyboard indicator-power&#xA;   libatkmm-1.6-1 libcairomm-1.0-1 libfs6 libgee2 libglibmm-2.4-1c2a&#xA;   libgucharmap-2-90-7 libpangomm-1.4-1 libsigc++-2.0-0c2a libtimezonemap1&#xA;   sbsigntool secureboot-db x11-apps x11-session-utils x11-xfs-utils xbitmaps&#xA;   xinit xinput&#xA;Use 'apt-get autoremove' to remove them.&#xA;The following extra packages will be installed:&#xA;   libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid&#xA;Suggested packages:&#xA;   xfonts-100dpi xfonts-75dpi&#xA;The following packages will be REMOVED:&#xA;   elementary-desktop libgl1-mesa-dri xorg xserver-xorg xserver-xorg-core&#xA;   xserver-xorg-input-evdev xserver-xorg-video-ati xserver-xorg-video-cirrus&#xA;   xserver-xorg-video-fbdev xserver-xorg-video-glamoregl&#xA;   xserver-xorg-video-intel xserver-xorg-video-mach64 xserver-xorg-video-mga&#xA;   xserver-xorg-video-modesetting xserver-xorg-video-neomagic&#xA;   xserver-xorg-video-nouveau xserver-xorg-video-openchrome&#xA;   xserver-xorg-video-qxl xserver-xorg-video-r128 xserver-xorg-video-radeon&#xA;   xserver-xorg-video-s3 xserver-xorg-video-savage&#xA;   xserver-xorg-video-siliconmotion xserver-xorg-video-sis&#xA;   xserver-xorg-video-sisusb xserver-xorg-video-tdfx xserver-xorg-video-trident&#xA;   xserver-xorg-video-vesa&#xA;The following NEW packages will be installed:&#xA;    libgbm1-lts-vivid libgl1-mesa-dri-lts-vivid xserver-xorg-core-lts-vivid&#xA;  0 upgraded, 3 newly installed, 28 to remove and 22 not upgraded.&#xA;Need to get 4,698 kB of archives.&#xA;After this operation, 27.2 MB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA; Get:1 ir.archive.ubuntu.com/ubuntu/ trusty-updates/main libgl1-mesa-dri-lts-vivid amd64 10.5.2-0ubuntu1~trusty1 [3,378 kB]&#xA; 32% [1 libgl1-mesa-dri-lts-vivid 1,525 kB/3,378 kB 45%]  &#xA; 35% [1 libgl1-mesa-dri-lts-vivid 1,660 kB/3,378 kB 49%]      &#xA; 37% [1 libgl1-mesa-dri-lts-vivid 1,735 kB/3,378 kB 51%]     &#xA; 40% [1 libgl1-mesa-dri-lts-vivid 1,901 kB/3,378 kB 56%]      &#xA; 43% [1 libgl1-mesa-dri-lts-vivid 2,020 kB/3,378 kB 60%]     &#xA; 46% [1 libgl1-mesa-dri-lts-vivid 2,151 kB/3,378 kB 64%]&#xA; 49% [1 libgl1-mesa-dri-lts-vivid 2,312 kB/3,378 kB 68%]      &#xA; 53% [1 libgl1-mesa-dri-lts-vivid 2,472 kB/3,378 kB 73%]    &#xA; 56% [1 libgl1-mesa-dri-lts-vivid 2,623 kB/3,378 kB 78%] &#xA; 59% [1 libgl1-mesa-dri-lts-vivid 2,769 kB/3,378 kB 82%] &#xA; 62% [1 libgl1-mesa-dri-lts-vivid 2,920 kB/3,378 kB 86%]   &#xA; 65% [1 libgl1-mesa-dri-lts-vivid 3,063 kB/3,378 kB 91%] &#xA; 68% [1 libgl1-mesa-dri-lts-vivid 3,207 kB/3,378 kB 95%]  &#xA; 71% [1 libgl1-mesa-dri-lts-vivid 3,358 kB/3,378 kB 99%] &#xA; 72% [Working]           &#xA; Get:2 ir.archive.ubuntu.com/ubuntu/ trusty-updates/main libgbm1-lts-vivid amd64 10.5.2-0ubuntu1~trusty1 [24.2 kB]&#xA; 72% [2 libgbm1-lts-vivid 1,176 B/24.2 kB 5%]  &#xA; 72% [Working]   &#xA; Get:3 ir.archive.ubuntu.com/ubuntu/ trusty-updates/main xserver-xorg-core-lts-vivid amd64 2:1.17.1-0ubuntu3~trusty1 [1,296 kB]&#xA; 72% [3 xserver-xorg-core-lts-vivid 1,172 B/1,296 kB 0%]   &#xA; 76% [3 xserver-xorg-core-lts-vivid 161 kB/1,296 kB 12%]   &#xA; 79% [3 xserver-xorg-core-lts-vivid 324 kB/1,296 kB 25%]  &#xA; 83% [3 xserver-xorg-core-lts-vivid 486 kB/1,296 kB 38%]   &#xA; 86% [3 xserver-xorg-core-lts-vivid 649 kB/1,296 kB 50%]    &#xA; 90% [3 xserver-xorg-core-lts-vivid 813 kB/1,296 kB 63%]   &#xA; 93% [3 xserver-xorg-core-lts-vivid 975 kB/1,296 kB 75%]    &#xA; 97% [3 xserver-xorg-core-lts-vivid 1,139 kB/1,296 kB 88%]      &#xA; 100% [Working]                                                                                                                   &#xA;  Fetched 4,698 kB in 17s (272 kB/s)&#xA;  (Reading database ... 131490 files and directories currently installed.)&#xA; Removing elementary-desktop (1.379+426~ubuntu0.3.1) ...&#xA;Removing xorg (1:7.7+1ubuntu8.1) ...&#xA;Removing xserver-xorg (1:7.7+1ubuntu8.1) ...&#xA;Removing xserver-xorg-video-intel (2:2.99.910-0ubuntu1.6+elementary0.3.1) ...&#xA;Removing xserver-xorg-video-ati (1:7.3.0-1ubuntu3.1) ...&#xA;Removing xserver-xorg-video-radeon (1:7.3.0-1ubuntu3.1) ...&#xA;Removing xserver-xorg-input-evdev (1:2.8.2-1ubuntu2) ...&#xA;dpkg: xserver-xorg-core: dependency problems, but removing anyway as you requested:&#xA; xserver-xorg-video-siliconmotion depends on xorg-video-abi-15; however:&#xA; Package xorg-video-abi-15 is not installed.&#xA; Package xserver-xorg-core which provides xorg-video-abi-15 is to be removed.&#xA; xserver-xorg-video-siliconmotion depends on xserver-xorg-core (&amp;gt;= 2:1.14.99.902); however:&#xA; Package xserver-xorg-core is to be removed.&#xA; xserver-xorg-video-mach64 depends on xorg-video-abi-15; however:&#xA; Package xorg-video-abi-15 is not installed.&#xA; Package xserver-xorg-core which provides xorg-video-abi-15 is to be removed.&#xA; xserver-xorg-video-mach64 depends on xserver-xorg-core (&amp;gt;= 2:1.14.99.902); however:&#xA; Package xserver-xorg-core is to be removed.&#xA; xserver-xorg-video-trident depends on xorg-video-abi-15; however:&#xA; Package xorg-video-abi-15 is not installed.&#xA; Package xserver-xorg-core which provides xorg-video-abi-15 is to be removed.&#xA; xserver-xorg-video-trident depends on xserver-xorg-core (&amp;gt;= 2:1.14.99.902); however:&#xA;  Package&#xA;  Removing xserver-xorg-core (2:1.15.1-0ubuntu2.7) ...&#xA;  dpkg: libgl1-mesa-dri:amd64: dependency problems, but removing anyway as you requested:&#xA;  libgbm1:amd64 depends on libgl1-mesa-dri; however:&#xA;  Package libgl1-mesa-dri:amd64 is to be removed.&#xA;  Package libgl1-mesa-dri-lts-vivid:amd64 which provides libgl1-mesa-dri is not installed.&#xA;  libegl1-mesa-drivers:amd64 depends on libgl1-mesa-dri; however:&#xA;  Package libgl1-mesa-dri:amd64 is to be removed.&#xA;  Package libgl1-mesa-dri-lts-vivid:amd64 which provides libgl1-mesa-dri is not installed.&#xA;  Removing libgl1-mesa-dri:amd64 (10.1.3-0ubuntu0.4) ...&#xA;  Processing triggers for man-db (2.6.7.1-1ubuntu1) ...&#xA;  Processing triggers for libc-bin (2.19-0ubuntu6.6) ...&#xA;Selecting previously unselected package libgl1-mesa-dri-lts-vivid:amd64.&#xA;(Reading database ... 131329 files and directories currently installed.)&#xA;Preparing to unpack .../libgl1-mesa-dri-lts-vivid_10.5.2- 0ubuntu1~trusty1_amd64.deb ...&#xA;Unpacking libgl1-mesa-dri-lts-vivid:amd64 (10.5.2-0ubuntu1~trusty1) ...&#xA;(Reading database ... 131347 files and directories currently installed.)&#xA;Removing xserver-xorg-video-cirrus (1:1.5.2-1build1) ...&#xA;Removing xserver-xorg-video-fbdev (1:0.4.4-1build1) ...&#xA;Removing xserver-xorg-video-glamoregl (0.6.0-0ubuntu4) ...&#xA;Removing xserver-xorg-video-mach64 (6.9.4-1build1) ...&#xA;Removing xserver-xorg-video-mga (1:1.6.3-1build1) ...&#xA;Removing xserver-xorg-video-modesetting (0.8.1-1build1) ...&#xA;Removing xserver-xorg-video-neomagic (1:1.2.8-1build1) ...&#xA;Removing xserver-xorg-video-nouveau (1:1.0.10-1ubuntu2) ...&#xA;Removing xserver-xorg-video-openchrome (1:0.3.3-1build1) ...&#xA;Removing xserver-xorg-video-qxl (0.1.1-0ubuntu3) ...&#xA;Removing xserver-xorg-video-r128 (6.9.2-1build1) ...&#xA;Removing xserver-xorg-video-s3 (1:0.6.5-0ubuntu4) ...&#xA;Removing xserver-xorg-video-savage (1:2.3.7-2ubuntu2) ...&#xA;Removing xserver-xorg-video-siliconmotion (1:1.7.7-2build1) ...&#xA;Removing xserver-xorg-video-sis (1:0.10.7-0ubuntu6) ...&#xA;Removing xserver-xorg-video-sisusb (1:0.9.6-2build1) ...&#xA;Removing xserver-xorg-video-tdfx (1:1.4.5-1build1) ...&#xA;Removing xserver-xorg-video-trident (1:1.3.6-0ubuntu5) ...&#xA;Removing xserver-xorg-video-vesa (1:2.3.3-1build1) ...&#xA;Processing triggers for man-db (2.6.7.1-1ubuntu1) ...&#xA;Processing triggers for libc-bin (2.19-0ubuntu6.6) ...&#xA;Selecting previously unselected package libgbm1-lts-vivid:amd64.&#xA;(Reading database ... 131201 files and directories currently installed.)&#xA;Preparing to unpack .../libgbm1-lts-vivid_10.5.2-0ubuntu1~trusty1_amd64.deb ...&#xA; Adding 'diversion of /usr/lib/x86_64-linux-gnu/libgbm.so.1.0.0 to /usr/lib/x86_64-linux-gnu/old.libgbm.so.1.0.0 by libgbm1-lts-vivid'&#xA; Adding 'diversion of /usr/lib/x86_64-linux-gnu/libgbm.so.1 to /usr/lib/x86_64-linux-gnu/old.libgbm.so.1 by libgbm1-lts-vivid'&#xA; Adding 'diversion of /usr/lib/x86_64-linux-gnu/gbm/gbm_gallium_drm.so to /usr/lib/x86_64-linux-gnu/gbm/old.gbm_gallium_drm.so by libgbm1-lts-vivid'&#xA; Unpacking libgbm1-lts-vivid:amd64 (10.5.2-0ubuntu1~trusty1) ...&#xA; Selecting previously unselected package xserver-xorg-core-lts-vivid.&#xA; Preparing to unpack .../xserver-xorg-core-lts-vivid_2%3a1.17.1-0ubuntu3~trusty1_amd64.deb ...&#xA;Unpacking xserver-xorg-core-lts-vivid (2:1.17.1-0ubuntu3~trusty1) ...&#xA;Processing triggers for man-db (2.6.7.1-1ubuntu1) ...&#xA;Setting up libgl1-mesa-dri-lts-vivid:amd64 (10.5.2-0ubuntu1~trusty1) ...&#xA;Installing new version of config file /etc/drirc ...&#xA;Setting up libgbm1-lts-vivid:amd64 (10.5.2-0ubuntu1~trusty1) ...&#xA;Setting up xserver-xorg-core-lts-vivid (2:1.17.1-0ubuntu3~trusty1) ...&#xA;Processing triggers for libc-bin (2.19-0ubuntu6.6) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hamed@Hamed-PC:~$ sudo apt-get install xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  efibootmgr gnome-power-manager gucharmap indicator-keyboard indicator-power&#xA;  libatkmm-1.6-1 libcairomm-1.0-1 libfs6 libgee2 libglamor0 libglibmm-2.4-1c2a&#xA;  libgucharmap-2-90-7 libpangomm-1.4-1 libsigc++-2.0-0c2a libspice-server1&#xA;  libtimezonemap1 libxvmc1 sbsigntool secureboot-db x11-apps x11-session-utils&#xA;  x11-xfs-utils xbitmaps xinit xinput&#xA;Use 'apt-get autoremove' to remove them.&#xA;Suggested packages:&#xA;  gpointing-device-settings touchfreeze&#xA;The following NEW packages will be installed:&#xA; xserver-xorg-input-mouse-lts-vivid xserver-xorg-input-synaptics-lts-vivid&#xA;0 upgraded, 2 newly installed, 0 to remove and 22 not upgraded.&#xA;Need to get 99.0 kB of archives.&#xA;After this operation, 369 kB of additional disk space will be used.&#xA;Get:1 ir.archive.ubuntu.com/ubuntu/ trusty-updates/main xserver-xorg-input-mouse-lts-vivid amd64 1:1.9.1-1~trusty1 [37.7 kB]&#xA;Get:2 ir.archive.ubuntu.com/ubuntu/ trusty-updates/main xserver-xorg-input-synaptics-lts-vivid amd64 1.8.1-1ubuntu1~trusty1 [61.3 kB]&#xA; Fetched 99.0 kB in 1s (73.9 kB/s)                                &#xA; Selecting previously unselected package xserver-xorg-input-mouse-lts-vivid.&#xA;(Reading database ... 131247 files and directories currently installed.)&#xA;Preparing to unpack .../xserver-xorg-input-mouse-lts-vivid_1%3a1.9.1-1~trusty1_amd64.deb ...&#xA;Unpacking xserver-xorg-input-mouse-lts-vivid (1:1.9.1-1~trusty1) ...&#xA;Selecting previously unselected package xserver-xorg-input-synaptics-lts-vivid.&#xA;Preparing to unpack .../xserver-xorg-input-synaptics-lts-vivid_1.8.1-1ubuntu1~trusty1_amd64.deb ...&#xA;Unpacking xserver-xorg-input-synaptics-lts-vivid (1.8.1-1ubuntu1~trusty1) ...&#xA;Processing triggers for man-db (2.6.7.1-1ubuntu1) ...&#xA;Setting up xserver-xorg-input-mouse-lts-vivid (1:1.9.1-1~trusty1) ...&#xA;Setting up xserver-xorg-input-synaptics-lts-vivid (1.8.1-1ubuntu1~trusty1) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2687" LastEditorUserId="2708" LastEditDate="2015-11-25T14:08:33.747" LastActivityDate="2016-01-19T14:13:27.427" Title="How can I install Wine, without disabling ALPS-Touch-pad driver?" Tags="|touchpad|wine|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2360" PostTypeId="1" CreationDate="2015-10-07T17:03:56.680" Score="1" ViewCount="594" Body="&lt;p&gt;I tried to install and run Fakturama a piece of office software.&#xA;It installs but it doesn't start.&#xA;In a forum they say:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit &lt;code&gt;/usr/share/Fakturama/configuration/config.ini&lt;/code&gt;&#xA;and insert &lt;code&gt;org.eclipse.swt.browser.DefaultType=mozilla&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(The German original:&#xA;editiere die Datei &lt;code&gt;/usr/share/Fakturama/configuration/config.ini&lt;/code&gt;&#xA;und füge die Zieile: &lt;code&gt;org.eclipse.swt.browser.DefaultType=mozilla&lt;/code&gt; hinzu.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to do that?&#xA;When I go to that &lt;code&gt;config.ini&lt;/code&gt; file and open it with scratch I am told I can't edit the file and have to save to a different location?&lt;/p&gt;&#xA;" OwnerUserId="2621" LastEditorUserId="2670" LastEditDate="2015-10-08T16:26:14.207" LastActivityDate="2015-10-08T16:26:14.207" Title="How do I edit protected .ini configuration files" Tags="|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2361" PostTypeId="2" ParentId="2360" CreationDate="2015-10-07T17:14:58.500" Score="1" Body="&lt;p&gt;The area the file resides in requires elevated privileges to be able to modify it.&#xA;You can edit is as follows:&#xA;From the command line enter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/Fakturama/configuration/config.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will be able to edit and save the file this way.&lt;/p&gt;&#xA;" OwnerUserId="2681" LastActivityDate="2015-10-07T17:14:58.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2362" PostTypeId="2" ParentId="2345" CreationDate="2015-10-07T17:30:47.437" Score="2" Body="&lt;p&gt;I was able to fix this issue. It appears that the xorg.conf file was never created. I believe that whatever caused the VM to lock with the mount: / busy being the last thing on the display must have prevented some things to finish. The following YouTube video helped me tremendously: &lt;a href=&quot;https://youtu.be/ZA-pQqN04as&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/ZA-pQqN04as&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to boot to the grub menu and select recovery to get to a root shell before X windows starts. I typed the following:&#xA;cd /&#xA;mount -o remount,rw /&#xA;cd &#xA;Xorg -configure&#xA;mv xorg.conf.new xorg.conf&#xA;mv xorg.conf /etc/X11&#xA;sudo reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I now have all of the available display settings available for my monitor. Looks awesome! I love elementary!! :)&lt;/p&gt;&#xA;" OwnerUserId="2671" LastActivityDate="2015-10-07T17:30:47.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2364" PostTypeId="2" ParentId="2111" CreationDate="2015-10-07T17:51:48.340" Score="1" Body="&lt;p&gt;Your user needs to be a member of the lpadmin group to have privileges to add a printer.&#xA;That is the default setting.&#xA;You can double check /etc/cups/cups-files.conf and look at the &quot;SystemGroup&quot; setting to confirm this.&lt;/p&gt;&#xA;" OwnerUserId="2681" LastActivityDate="2015-10-07T17:51:48.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2365" PostTypeId="1" CreationDate="2015-10-07T21:23:14.037" Score="1" ViewCount="32" Body="&lt;p&gt;Someone know how run pydio-ui here is the Binaries&#xA;&lt;a href=&quot;https://pyd.io/apps/pydio-sync/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pyd.io/apps/pydio-sync/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output:&#xA; message: I couldn't detect any system tray on this system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here what I need:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/UuwEn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UuwEn.png&quot; alt=&quot;Main&quot;&gt;&lt;/a&gt;&#xA;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="2693" LastActivityDate="2015-10-07T21:23:14.037" Title="Systray issue : PydioSync v6" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ClosedDate="2016-02-03T01:46:00.573" ContentLicense="CC BY-SA 3.0" />
  <row Id="2367" PostTypeId="2" ParentId="2316" CreationDate="2015-10-08T00:32:39.790" Score="1" Body="&lt;p&gt;&lt;code&gt;sudo apt-get purge maya-calendar&lt;/code&gt; will remove the application, while &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; will remove the package's dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the mail client, I don't really have any advice. I just use my browser.&lt;/p&gt;&#xA;" OwnerUserId="2524" LastActivityDate="2015-10-08T00:32:39.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2368" PostTypeId="1" CreationDate="2015-10-08T02:01:25.590" Score="5" ViewCount="2458" Body="&lt;p&gt;When in Files, you can create a new folder by right-clicking on an empty space in the files window, then selecting New &gt; Folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is, except when there is no &quot;empty space&quot; in your window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there's already a long list of files and folders in your current window, the only option left for creating a folder is using the shortcut &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;N&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can place a &quot;New Folder&quot; button? I'm not the shortcut kind of guy.&lt;/p&gt;&#xA;" OwnerUserId="425" LastActivityDate="2016-06-18T01:43:43.397" Title="Can I add a &quot;Create New Folder&quot; button in Files?" Tags="|files|user-interface|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2369" PostTypeId="1" CreationDate="2015-10-08T02:23:49.167" Score="2" ViewCount="226" Body="&lt;p&gt;If I plug a secondary monitor via HDMI when I'm already logged in, everything runs smoothly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if I plug the HDMI while in the Welcome screen, and then I log in, the graphics in my main screen (laptop built in) get displayed in a huge scale.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, if I plug the HDMI cable while the computer is in suspend mode, and then I wake it up, after unlocking my session I only get graphics in the secondary (HDMI) screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I let the computer go into suspend mode with the HDMI cable plugged, and then I unplug it, when I wake the computer up something wrong happens, but I can't really describe it. It's like the PC freezes, but not really. I can't remember well because I haven't replicated this lately. The other behaviors are pretty predictable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tried what happens when plugging before booting, and I haven't tried with video-out options other than HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a problem with my hardware? Or is elementary HDMI output buggy?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using a G480 Lenovo laptop Quad-Core i3, Intel graphics, 1366 x 768 px&#xA;Secondary monitor is a Samsung 19&quot;, 1920 x 1080 px&lt;/p&gt;&#xA;" OwnerUserId="425" LastActivityDate="2018-11-07T17:21:22.107" Title="Second monitor via HDMI behavior is inconsistent?" Tags="|display|resolution|user-interface|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2370" PostTypeId="1" AcceptedAnswerId="2378" CreationDate="2015-10-08T04:26:44.307" Score="2" ViewCount="76" Body="&lt;p&gt;since two days ago, there's some warning icon appear on my top bar like this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've try click &lt;code&gt;Show Updates&lt;/code&gt; but said my system already updated (last action bout two days ago too)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/avn7K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/avn7K.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my apt lists&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/apt/sources.list&#xA;deb http://kambing.ui.ac.id/ubuntu/ trusty main restricted universe multiverse&#xA;deb http://kambing.ui.ac.id/ubuntu/ trusty-updates main restricted universe multiverse&#xA;deb http://kambing.ui.ac.id/ubuntu/ trusty-security main restricted universe multiverse&#xA;deb http://kambing.ui.ac.id/ubuntu/ trusty-backports main restricted universe multiverse&#xA;deb http://kambing.ui.ac.id/ubuntu/ trusty-proposed main restricted universe multiverse&#xA;&#xA;# MariaDB 10.0 repository list - created 2015-07-10 22:04 UTC&#xA;# http://mariadb.org/mariadb/repositories/&#xA;deb http://mariadb.biz.net.id//repo/10.0/ubuntu trusty main&#xA;deb http://download.virtualbox.org/virtualbox/debian trusty contrib&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;```&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to fix it? Thanks&lt;/p&gt;&#xA;" OwnerUserId="335" LastActivityDate="2015-10-09T04:13:31.173" Title="Warning Notification Updates" Tags="|apt|laptop|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2371" PostTypeId="1" CreationDate="2015-10-08T05:00:39.660" Score="11" ViewCount="13427" Body="&lt;p&gt;I have found IBus installed in my fresh elementary OS. But I cannot use it over default system layouts. I prefer IBus because, it supports the m17n engine which includes my preferred layout for writing Bengali. From system layouts which is not accessible. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I use IBus over the system layouts? If IBus is not usable, then why it is installed by default in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="2695" LastEditorUserId="45" LastEditDate="2015-10-08T19:10:53.727" LastActivityDate="2017-02-02T07:10:32.393" Title="How can I use IBus as the default input method?" Tags="|ibus|input|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2372" PostTypeId="1" CreationDate="2015-10-08T05:58:15.103" Score="1" ViewCount="162" Body="&lt;p&gt;I am using latest VirtualBox to have elementary OS on my work PC for personal use. Work PC parameters: W7Pro, i7-4770k, 16GB RAM, 256 SSD, AMD FirePro V4900. I reserved 4 cores, 4GB RAM, 30GB SSD, 128MB 3D.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know why, but elementary OS is very choppy. I tried Mint xfce on VBox too, but I haven't noticed any lag or choppiness. Maybe someone has any ideas what might be a problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS on VMWare Player works very well, but I would like to use VBox because of additional features.&lt;/p&gt;&#xA;" OwnerUserId="832" LastEditorUserId="34" LastEditDate="2015-11-19T13:25:32.853" LastActivityDate="2015-11-19T13:25:32.853" Title="Freya choppy in VirtualBox" Tags="|release-freya|virtualbox|" AnswerCount="0" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2373" PostTypeId="1" AcceptedAnswerId="2375" CreationDate="2015-10-08T07:41:40.083" Score="1" ViewCount="518" Body="&lt;p&gt;How do I add users without showing them in the welcome screen? I would like to add a user for ftp access but I don't need the person to show up in my elementary OS welcome screen. Same goes for my wife's account actually...&lt;/p&gt;&#xA;" OwnerUserId="2356" LastActivityDate="2015-10-08T09:22:35.333" Title="Do not show users in welcome screen" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2374" PostTypeId="1" CreationDate="2015-10-08T08:34:25.457" Score="1" ViewCount="937" Body="&lt;p&gt;I have elementary OS Freya 0.3.1 Installed on my HP Pavilion G6 2014TX laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My college WiFi connection connects at first but it keeps on dropping after 2-5 mins and doesn't connect after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My college uses &lt;strong&gt;wpa2 enterprise&lt;/strong&gt; connection. I have &lt;strong&gt;Ralink&lt;/strong&gt; &lt;strong&gt;RT5390&lt;/strong&gt; WiFi card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already tried disconnecting and reconnecting.&lt;/p&gt;&#xA;" OwnerUserId="2697" LastEditorUserId="3757" LastEditDate="2016-04-23T12:00:58.343" LastActivityDate="2016-04-23T12:00:58.343" Title="WiFi keeps dropping and won't connect" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2375" PostTypeId="2" ParentId="2373" CreationDate="2015-10-08T09:22:35.333" Score="3" Body="&lt;p&gt;Add your user as usual in User Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To hide a user named &lt;code&gt;ftp&lt;/code&gt;, modify or create a file named&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; /var/lib/AccountsService/users/ftp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;containing this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[User]&#xA;SystemAccount=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-10-08T09:22:35.333" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2376" PostTypeId="2" ParentId="2368" CreationDate="2015-10-08T09:42:05.357" Score="5" Body="&lt;p&gt;This is not the solution you ask for, but I have an insiders' tip:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can still use the contextmenu to create a new folder in a full list view.&lt;br&gt;&#xA;Just right-click on the &quot;select-checkmark-icon&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wnH34.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wnH34.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastActivityDate="2015-10-08T09:42:05.357" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2377" PostTypeId="1" AcceptedAnswerId="2771" CreationDate="2015-10-08T14:16:13.297" Score="6" ViewCount="149" Body="&lt;p&gt;I'm looking for a tool that will layout images into grids &lt;strong&gt;&lt;em&gt;dynamically&lt;/em&gt;&lt;/strong&gt; &lt;strong&gt;without altering their proportions&lt;/strong&gt;. The purpose would be to make cutting image printouts much faster for scrapbooking. I know a lot of websites can layout images dynamically, taking each image size into consideration. Is it possible to run a &lt;a href=&quot;/questions/tagged/command-line&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;command-line&amp;#39;&quot; rel=&quot;tag&quot;&gt;command-line&lt;/a&gt; tool to achieve something like this? If possible, a grid without borders would be much better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an extension for photoshop that achieves something like this: &lt;a href=&quot;http://lumens.se/tychpanel/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://lumens.se/tychpanel/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, from what I can see, other options in Linux aren't dynamic and require that all images have the same aspect-ratio. It would be ok if there is a little space left over at the end of a page (as in the example). The priority is to maintain each images' aspect ratio whilst using as much space as possible on the page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An example:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Py95M.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Py95M.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2567" LastEditorUserId="16827" LastEditDate="2019-01-07T12:12:25.873" LastActivityDate="2019-01-07T12:12:25.873" Title="Is there a tool/method to dynamically layout a grid of images for scrapbook cutouts?" Tags="|command-line|apps|photo-editing|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2378" PostTypeId="2" ParentId="2370" CreationDate="2015-10-08T15:57:49.620" Score="1" Body="&lt;p&gt;Now its normal again, but i'm not sure what made it disappear, this is what i did&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;run &lt;code&gt;sudo apt-get update&lt;/code&gt; -&gt; until this step, warning still shown&lt;/li&gt;&#xA;&lt;li&gt;restart my laptop -&gt; until this step, warning still shown&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And after about one hour, warning disappear, so i think its solved for right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks all&lt;/p&gt;&#xA;" OwnerUserId="335" LastActivityDate="2015-10-08T15:57:49.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2379" PostTypeId="2" ParentId="2327" CreationDate="2015-10-08T17:51:49.893" Score="3" Body="&lt;p&gt;I had the same issue. Following the steps of this &lt;a href=&quot;http://www.cyberfella.co.uk/2015/06/26/installing-dropbox-on-elementaryos-freya/&quot; rel=&quot;nofollow&quot;&gt;link&lt;/a&gt; worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simon&lt;/p&gt;&#xA;" OwnerUserId="2704" LastEditorUserId="129" LastEditDate="2015-10-09T12:51:20.017" LastActivityDate="2015-10-09T12:51:20.017" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2380" PostTypeId="1" AcceptedAnswerId="2497" CreationDate="2015-10-08T21:53:34.727" Score="6" ViewCount="314" Body="&lt;p&gt;I have a USB audio device that has input and output from/to guitar. It gets power from USB. It was working all well before. But after recent updates, It's kind of half-working. The device only gets power when there is some audio is being playing in laptop or some input signal is sent from guitar. So, If I stop playing guitar for a second, it turns off and when I play again it goes on. I want to get continuous power. Is there any way I can fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="2705" LastActivityDate="2015-10-14T17:10:51.550" Title="Question About Audio Device" Tags="|audio|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2381" PostTypeId="1" CreationDate="2015-10-08T22:44:16.560" Score="0" ViewCount="30" Body="&lt;p&gt;Half the time the icons don't show up and they take away from watching more than one video at once.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3Nefm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3Nefm.jpg&quot; alt=&quot;Image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2706" LastEditorUserId="129" LastEditDate="2015-10-09T13:03:01.513" LastActivityDate="2015-10-09T13:03:01.513" Title="How do I remove the WIndows overview mode icons?" Tags="|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2382" PostTypeId="1" CreationDate="2015-10-08T23:46:35.297" Score="2" ViewCount="252" Body="&lt;p&gt;I have tried everything in &lt;a href=&quot;https://elementaryos.stackexchange.com/q/288/5565&quot;&gt;this thread&lt;/a&gt; and I have asked &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3ndb7u/network_icon_missing_from_the_wingpanel/&quot; rel=&quot;nofollow noreferrer&quot;&gt;on Reddit&lt;/a&gt; but I am unable to get the network icon back. Please help.&lt;/p&gt;&#xA;" OwnerUserId="2279" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-08T04:25:45.000" Title="Network icon missing in Freya wingpanel" Tags="|release-freya|wingpanel|networking|icons|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2383" PostTypeId="1" AcceptedAnswerId="7943" CreationDate="2015-10-09T01:05:36.197" Score="1" ViewCount="1457" Body="&lt;p&gt;My computer (MSI Cubi - &lt;a href=&quot;http://us.msi.com/product/bb/Cubi-Mini-PC-Kit.html#hero-overview&quot; rel=&quot;nofollow&quot;&gt;http://us.msi.com/product/bb/Cubi-Mini-PC-Kit.html#hero-overview&lt;/a&gt;) has a headphone/mic combo port.  A single port like you'd find on your mobile phone.  However, after plugging in multiple headphone with a mic such as Apple earbuds or Marshall headphone/mic the headphones work fine, but the mic does not work at all.  Going to the System Settings &gt; Sound &gt; Input &gt; and selecting Analog Input - Built-in audio it is enabled, but the sound level bar doesn't register any sound when talking into it.  USB mics works fine.&lt;/p&gt;&#xA;" OwnerUserId="366" LastActivityDate="2016-09-17T03:29:49.740" Title="Why doesn't my microphone work using the headphone/mic combo port?" Tags="|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2384" PostTypeId="2" ParentId="2381" CreationDate="2015-10-09T01:46:46.373" Score="3" Body="&lt;p&gt;It's not possible unless you branch the source code and program in those changes.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-09T01:46:46.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2385" PostTypeId="5" CreationDate="2015-10-09T01:51:07.707" Score="0" Body="&lt;p&gt;GRUB  provides a user the choice to boot one of multiple operating systems installed on a computer or select a specific kernel configuration available on a particular operating system's partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB was initially developed by Erich Boleyn as part of work on booting the operating system GNU/Hurd, developed by the Free Software Foundation.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-21T13:34:40.070" LastActivityDate="2015-10-21T13:34:40.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2386" PostTypeId="4" CreationDate="2015-10-09T01:51:07.707" Score="0" Body="GRUB is the GRand Unified Bootloader, a BootLoader that can be used to boot most operating systems." OwnerUserId="129" LastEditorUserId="26" LastEditDate="2015-10-10T22:42:53.110" LastActivityDate="2015-10-10T22:42:53.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2387" PostTypeId="1" CreationDate="2015-10-09T02:55:25.310" Score="4" ViewCount="1574" Body="&lt;p&gt;I have a wacom intuos pen small (CTL-480); it works &quot;plug and play&quot; but it is not recognized by elementary OS Freya (in system setting -&gt; wacom tablet it says that there is no tablet connected);&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I expected to be able to configure the tablet keys and other settings there;&#xA;Is there something I can do?&lt;/p&gt;&#xA;" OwnerUserId="2424" LastEditorUserId="3757" LastEditDate="2016-04-20T07:19:10.060" LastActivityDate="2016-04-20T07:19:10.060" Title="wacom tablet not recognized by freya" Tags="|release-freya|" AnswerCount="0" CommentCount="8" ClosedDate="2016-10-21T20:53:26.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="2388" PostTypeId="1" AcceptedAnswerId="2426" CreationDate="2015-10-09T04:04:28.370" Score="0" ViewCount="435" Body="&lt;p&gt;I'm hoping someone can help me with this. I've been through the forums, and tried the suggested solutions but I still can't get elementary to boot. (Not sure of the version but downloaded it last night.) Clearly it seems to be the same issue (though I'm sure I had a web connection.) The test boot from the USB stick worked fine. I did a clean install (no windows backup) and now am stuck at GNU GRUB v2.02~beta2-9 screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried hitting 'c' and enter as suggested in one fix post, but get 'error: can't find command 'c'.' So, moving on, I have tried all combos of configfile HD 0 through 4, and gpt 0 through 4, and even substituted msdos for gpt (as I found in a post) with no success. I'm mostly flying blind taking shots in the dark. I get what is happening and can follow directions but am otherwise a noob with GRUB, Linux etc. so I can't diagnose why the fix isn't working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Forgive the abbreviated descriptions above as I am typing this on my phone. When typing the GRUB commands I am following the posts to the letter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your help is appreciated! &lt;/p&gt;&#xA;" OwnerUserId="2702" LastActivityDate="2015-10-11T20:28:58.333" Title="UEFI bug fix not working HP Stream 13" Tags="|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2389" PostTypeId="2" ParentId="2370" CreationDate="2015-10-09T04:13:31.173" Score="0" Body="&lt;p&gt;If you click on the symbol (sometimes triangle shape and red color dash,AFAIK) it will show the exact error message.The reason is dependency issue,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-09T04:13:31.173" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2390" PostTypeId="1" AcceptedAnswerId="2392" CreationDate="2015-10-09T04:26:04.170" Score="8" ViewCount="2886" Body="&lt;p&gt;I'm trying to transfer some pictures from my phone to my computer, but I cannot seem to find an option to receive files, only to send them. I tried looking up some guides for Ubuntu &lt;a href=&quot;http://www.lorrin.org/blog/2015/01/08/receive-files-via-bluetooth-on-ubuntu/&quot; rel=&quot;noreferrer&quot;&gt;(for example)&lt;/a&gt;, but they all tell me to just enable a checkbox that isn't here on freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to set it up manually, or an application that'll let me receive files over BT?&lt;/p&gt;&#xA;" OwnerUserId="2709" LastActivityDate="2015-10-09T04:43:12.487" Title="How to recieve files via bluetooth?" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2391" PostTypeId="1" AcceptedAnswerId="2410" CreationDate="2015-10-09T04:33:50.590" Score="3" ViewCount="2677" Body="&lt;p&gt;I am user of Ubuntu. I just want to decide install elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go to the &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow&quot;&gt;official site&lt;/a&gt; the actual size showing is 909 MB, but the downloaded file with $0 shows 867 MB. Why?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any difference between downloading with and without money?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2015-11-06T18:26:30.783" LastActivityDate="2020-06-29T23:00:16.423" Title="Is there any difference between paid and unpaid versions of elementary OS?" Tags="|system-installation|" AnswerCount="4" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2392" PostTypeId="2" ParentId="2390" CreationDate="2015-10-09T04:43:12.487" Score="3" Body="&lt;p&gt;go into applications menu and search for &lt;strong&gt;personal file sharing&lt;/strong&gt; there you will find an option called &lt;strong&gt;receive files in downloads folder over bluetooth&lt;/strong&gt; tick that one...if you can't find it while searching, you can find it in &lt;strong&gt;/usr/share/applications/&lt;/strong&gt; folder.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-09T04:43:12.487" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2393" PostTypeId="2" ParentId="2316" CreationDate="2015-10-09T05:04:38.327" Score="1" Body="&lt;p&gt;Open terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To uninstall &lt;code&gt;maya-calendar&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove maya-calendar&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To uninstall `maya-calender and dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --auto-remove maya-calendar&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Purge your config/data too:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge --auto-remove maya-calendar&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Caution! Purged config/data can not be restored by reinstalling the package&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-21T12:29:52.893" LastActivityDate="2017-04-21T12:29:52.893" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2394" PostTypeId="1" AcceptedAnswerId="2406" CreationDate="2015-10-09T05:09:04.227" Score="6" ViewCount="198" Body="&lt;p&gt;I want to assign some custom keyboard shortcut for noise music player.&#xA;When it running background , using keyboard want to paly/pause or change music.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway assign those custom keyboard shortcut for noise music player?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Amarok have option assign keyboard shortcut but when it's running on background ,shortcut not work :(&lt;/p&gt;&#xA;" OwnerUserId="2710" LastActivityDate="2016-08-08T05:15:52.440" Title="Is there anyway assign custom keyboard shorcut for noise music player?" Tags="|release-freya|music|audio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2395" PostTypeId="1" CreationDate="2015-10-09T05:35:20.733" Score="6" ViewCount="1261" Body="&lt;p&gt;I have changed the settings at &lt;strong&gt;security &amp;amp; privacy&lt;/strong&gt; but elementary OS still collects recent files and shows them in &lt;strong&gt;recent&lt;/strong&gt; folder, so how would i turn off recent files? Thanks.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastEditorUserId="3757" LastEditDate="2016-04-23T12:00:32.297" LastActivityDate="2016-09-15T03:06:51.793" Title="How to disable recent files in pantheon files?" Tags="|system|files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2396" PostTypeId="1" CreationDate="2015-10-09T06:23:42.903" Score="1" ViewCount="332" Body="&lt;p&gt;Using 0.3.1 Freya, 64-bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my problem.  I have an app, Isoplex, a clone of Popcorn-Time, that runs as an executable.  I have it stored in my /home/jeff/ directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Double-clicking on the file in Files does nothing, although I have it marked as executable.  But navigating to the directory, and then invoking &quot;./Isoplex&quot;, runs it just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried dragging the executable to Plank, but it won't launch from there, either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get a ton of stuff when I run from terminal.  I'll paste the output here -- I can't make heads or tails of what's happening here.  And note that, after all this scrolls, the app finally runs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me so that I can launch Isoplex from Plank?  Thanks.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;eff@jeff-All-Series:~/Isoplex$ ./Isoplex&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(170)] Running without the SUID sandbox! See https://code.google.com/p/chromium/wiki/LinuxSUIDSandboxDevelopment for more information on developing with the sandbox on.&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(198)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(198)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(198)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(198)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2667:1008/232140:ERROR:browser_main_loop.cc(198)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;ATTENTION: default value of option force_s3tc_enable overridden by environment.&#xA;[2667:1008/232143:INFO:CONSOLE(13)] &quot;&quot;Database path: /home/jeff/.config/Isoplex&quot;&quot;, source: app://host/src/app/database.js (13)&#xA;[2667:1008/232143:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Scanning: Local Network for Airplay devices&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232143:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Scanning: Local Network for DLNA devices&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232143:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Scanning: /usr/bin&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232143:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Scanning: /usr/local/bin&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232144:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Spawning new provider&quot; &quot;color: blue;&quot; &quot;color: black;&quot; &quot;TVApi&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232144:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Loading DB&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232144:INFO:CONSOLE(28)] &quot;&quot;track done&quot;&quot;, source: app://host/src/app/bootstrap.js (28)&#xA;[2667:1008/232144:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Initializing HTTP API server&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232144:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %cChecking %s endpoint&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot; &quot;eztvapi.re&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;[2667:1008/232144:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %cChecking %s endpoint&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot; &quot;popcorntime.io&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;[2667:1008/232144:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] External Players: scan finished&quot; &quot;color: blue;&quot; &quot;color: black;&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232145:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Spawning new provider&quot; &quot;color: blue;&quot; &quot;color: black;&quot; &quot;Trakttv&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232145:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Spawning new provider&quot; &quot;color: blue;&quot; &quot;color: black;&quot; &quot;TVShowTime&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232145:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %cAutomatic updating disabled&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;[2667:1008/232145:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Spawning new provider&quot; &quot;color: blue;&quot; &quot;color: black;&quot; &quot;Yts&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232145:INFO:CONSOLE(43)] &quot;&quot;[%cINFO%c] Spawning new provider&quot; &quot;color: blue;&quot; &quot;color: black;&quot; &quot;YSubs&quot;&quot;, source: app://host/src/app/app.js (43)&#xA;[2667:1008/232145:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %cPopcorn Time %s startup time: %sms&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot; &quot;0.3.8-0&quot; &quot;1979.828&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;[2667:1008/232146:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %c49 cached subtitle&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;[2667:1008/232146:INFO:CONSOLE(38)] &quot;&quot;%c[%cDEBUG%c] %cCache 0 subtitle&quot; &quot;color: black;&quot; &quot;color: green;&quot; &quot;color: black;&quot; &quot;color: blue;&quot;&quot;, source: app://host/src/app/app.js (38)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="458" LastEditorUserId="2708" LastEditDate="2015-10-09T12:50:28.910" LastActivityDate="2022-12-25T04:08:56.590" Title="Difficult problem with running an executable in Elementary" Tags="|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2397" PostTypeId="1" CreationDate="2015-10-09T06:57:00.390" Score="1" ViewCount="3012" Body="&lt;p&gt;Running elementary OS freya 0.3.1 Freya with network printer HP Photosmart 7520 All-In-One Inkjet Printer/Copier/Scanner/Fax.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Printer works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I invoke Simple Scan to scan a document, the following error is displayed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No scanners detected&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please check your scanner is connected and powered on&lt;/p&gt;&#xA;" OwnerUserId="2711" LastEditorUserId="3757" LastEditDate="2016-04-23T11:59:52.717" LastActivityDate="2016-07-14T16:11:24.183" Title="No scanners detected" Tags="|applications|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2398" PostTypeId="1" AcceptedAnswerId="2412" CreationDate="2015-10-09T09:02:40.523" Score="2" ViewCount="119" Body="&lt;p&gt;I am using windows 8 and Ubuntu 14.04.I would like to install elementary OS.I found a link related to installation  &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/357/how-do-i-install-elementary-os&quot;&gt;how-do-i-install-elementary-os&lt;/a&gt;.But that seems not much useful for dual boot(here triple).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question:   &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How to install elementary OS as per partition table.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/qBaS5.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-10T04:39:55.063" Title="How to install latest version of elementary OS along with windows and Ubuntu" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2399" PostTypeId="1" CreationDate="2015-10-09T10:40:39.277" Score="1" ViewCount="183" Body="&lt;p&gt;in my system, I can't open rhythmbox. It crash as soon as I start it! How can I fix this? I'm running the latest Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Terminal output :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(rhythmbox:16154): Gtk-CRITICAL **: gtk_css_provider_load_from_path: assertion 'path != NULL' failed&#xA;Unable to open ~/.mtpz-data for reading, MTPZ disabled.&#xA;(rhythmbox:16154): GLib-GObject-CRITICAL **: object SoupServer 0x24802a0 finalized while still in-construction&#xA;&#xA;(rhythmbox:16154): GLib-GObject-CRITICAL **: Custom constructor for class SoupServer returned NULL (which is invalid). Please use GInitable instead.&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;&#xA;(rhythmbox:16154): Gtk-WARNING **: Duplicate child name in GtkStack: Add to Playlist&#xA;&#xA;[1]    16154 segmentation fault (core dumped)  rhythmbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="489" LastEditorUserId="3757" LastEditDate="2016-04-23T11:58:49.590" LastActivityDate="2016-04-23T11:58:49.590" Title="Rhythmbox keeps crashing on start" Tags="|release-freya|apps|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2400" PostTypeId="2" ParentId="2391" CreationDate="2015-10-09T11:20:19.650" Score="5" Body="&lt;p&gt;Yes, elementary OS is completly Open Source. Most projects are listed &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The iso is the same regardless you pay something or not.&lt;/p&gt;&#xA;&lt;p&gt;You can verify the iso. See this &lt;a href=&quot;https://elementary.io/de/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;site&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2020-06-29T23:00:16.423" LastActivityDate="2020-06-29T23:00:16.423" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="2402" PostTypeId="1" AcceptedAnswerId="2449" CreationDate="2015-10-09T11:25:13.323" Score="2" ViewCount="1007" Body="&lt;p&gt;I have an Intel Core i3 CPU m 380 @253GHz, and I had tried to play a HEVC file in VLC; it played but not smoothly(RAM is 4GB).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I have another laptop of with Pentium R Dual-Core CPU T4500 @2.30GHz  (RAM is 2GB). And the same HEVC file plays smoothly on this system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both shares Integrated Intel Graphics Chip.&lt;/p&gt;&#xA;" OwnerUserId="2714" LastEditorUserId="2714" LastEditDate="2015-10-09T13:32:27.203" LastActivityDate="2015-10-11T00:06:55.283" Title="Why HEVC format requires Dual-Core CPU?" Tags="|codec|cpu|video-player|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2403" PostTypeId="2" ParentId="2124" CreationDate="2015-10-09T11:29:20.993" Score="0" Body="&lt;p&gt;This is what solved the problem for me.&#xA;Goto System Settings -&gt; Language &amp;amp; Region&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The window would probably say something like language not properly installed. CClick on it and let it install.&#xA;That's about it.&lt;/p&gt;&#xA;" OwnerUserId="36" LastActivityDate="2015-10-09T11:29:20.993" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2405" PostTypeId="1" CreationDate="2015-10-09T12:08:46.270" Score="2" ViewCount="8156" Body="&lt;p&gt;What are the video players available for elementary OS and how to install them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to know installation from the Software center and using terminal command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.SMplayer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2405/what-are-the-video-players-available-for-elementary-os/2409#2409&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.VLC &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2405/what-are-the-video-players-available-for-elementary-os/2408#2408&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.Banshee &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2405/what-are-the-video-players-available-for-elementary-os/2696#2696&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.mpv &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2834/2708&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-17T14:51:45.760" Title="What are the video players available for elementary OS?" Tags="|video-player|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2406" PostTypeId="2" ParentId="2394" CreationDate="2015-10-09T12:25:16.763" Score="9" Body="&lt;p&gt;Using the 'Keyboard' plug in System Settings it's possible to do this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;System Settings&lt;/code&gt; --&gt; &lt;code&gt;Keyboard&lt;/code&gt; --&gt; &lt;code&gt;Shortcuts&lt;/code&gt; --&gt; Media gives options to change the shortcuts for playing/pausing and other media functions.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just click the shortcut you want to change and press the desired key-combination.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RsB3o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RsB3o.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="229" LastEditorUserId="2708" LastEditDate="2016-01-05T03:23:32.883" LastActivityDate="2016-01-05T03:23:32.883" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2407" PostTypeId="2" ParentId="2405" CreationDate="2015-10-09T12:29:50.200" Score="9" Body="&lt;h2&gt;Audience (Videos)&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;elementary OS comes with its own video player preinstalled. It's called &lt;a href=&quot;https://launchpad.net/audience&quot;&gt;Audience&lt;/a&gt;, but it's commonly referred to as Videos in the elementary community. It offers a minimalistic user interface, it works with a large variety of video codecs' and it manages subtitles just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://elementary.io/images/screenshots/videos.png&quot; alt=&quot;Audience running in elementary OS Freya&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-09T12:29:50.200" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2408" PostTypeId="2" ParentId="2405" CreationDate="2015-10-09T12:35:35.400" Score="6" Body="&lt;h2&gt;VLC&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.videolan.org/vlc/&quot; rel=&quot;nofollow noreferrer&quot;&gt;VLC&lt;/a&gt; is probably the most popular open source video player. It can handle a stunning amount of files (it's not limited to just videos), it can be run on a large variety of platforms (Linux, Windows, OS X, Unix...) and it's highly customizable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it by typing &lt;code&gt;sudo apt-get install vlc&lt;/code&gt; inside of your terminal or by searching for it using Software Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cZeTG.png&quot; alt=&quot;&quot;&gt; &lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-09T12:35:35.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2409" PostTypeId="2" ParentId="2405" CreationDate="2015-10-09T12:40:26.130" Score="3" Body="&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;http://smplayer.sourceforge.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;SMPlayer&lt;/a&gt;&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SMPlayer is a free media player for Linux with &lt;strong&gt;built-in codecs&lt;/strong&gt; that can play virtually all video and audio formats. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't need any external codecs. Just install SMPlayer and you'll be able to play all formats without the hassle to find and install codec packs.SMPlayer is a free media player.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Installation&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from &lt;strong&gt;software center&lt;/strong&gt; (easy way)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install smplayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jhKwR.jpg&quot; alt=&quot;Imgur&quot;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Possible to display two subtitles&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For screenshots refer &lt;a href=&quot;http://smplayer.sourceforge.net/en/screenshots&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-17T14:48:35.167" LastActivityDate="2015-11-17T14:48:35.167" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2410" PostTypeId="2" ParentId="2391" CreationDate="2015-10-09T13:44:07.537" Score="12" Body="&lt;p&gt;&lt;strong&gt;No, there is absolutely no difference between paid and unpaid downloads. They link to identical ISO files.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To answer your first question, yes, elementary OS &lt;em&gt;is&lt;/em&gt; open source. Most of the code can be found &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;. Even the &lt;a href=&quot;https://elementary.io&quot; rel=&quot;noreferrer&quot;&gt;elementary.io&lt;/a&gt; website itself &lt;a href=&quot;https://github.com/elementary/mvp&quot; rel=&quot;noreferrer&quot;&gt;is open source&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To answer your second question, you're making a mistake by confusing MB with MiB. It's a pretty common error. Here's the difference:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Decimal: 1 MB = 1000 KB&lt;/li&gt;&#xA;&lt;li&gt;Binary: 1 MiB = 1024 KiB&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The website itself displays the size in MB, while your application actually displays the size in MiB. The size is the same, the standard used to display it is not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's an example. I have downloaded the &lt;code&gt;.iso&lt;/code&gt; file using qBittorrent. Then, I checked its size using both qBittorrent and Pantheon Files. Here's what I got:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BQlHd.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BQlHd.png&quot; alt=&quot;difference between MB and MiB&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice how they are displaying the different size even though they are actually displaying the size of the same file.&lt;/p&gt;&#xA;" OwnerUserId="138" LastEditorUserId="26" LastEditDate="2016-01-02T18:07:23.923" LastActivityDate="2016-01-02T18:07:23.923" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2411" PostTypeId="1" CreationDate="2015-10-09T14:10:49.387" Score="2" ViewCount="174" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QaQTB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QaQTB.png&quot; alt=&quot;Screenshot of the Issue&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What codec is needed for me to play .wma files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can confirm that the file is not corrupted. I can play it in another app (VLC for example). I've already installed &lt;code&gt;gstreamer0.10-plugins-ugly&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="806" LastEditorUserId="806" LastEditDate="2015-10-09T18:57:15.513" LastActivityDate="2015-10-09T21:00:37.387" Title="How can I play .wma files with Music?" Tags="|music|codec|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2412" PostTypeId="2" ParentId="2398" CreationDate="2015-10-09T15:45:40.463" Score="2" Body="&lt;p&gt;I was successfully Installed on Unallocated space by using &lt;code&gt;something else&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Added &lt;code&gt;swap area&lt;/code&gt; and &lt;code&gt;/root&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/sxPOv.jpg&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-09T15:45:40.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2413" PostTypeId="2" ParentId="2264" CreationDate="2015-10-09T17:37:38.660" Score="1" Body="&lt;p&gt;It worked now after disconnecting HDMI and starting the OS and then connceting HDMI again&lt;/p&gt;&#xA;" OwnerUserId="2612" LastActivityDate="2015-10-09T17:37:38.660" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2414" PostTypeId="1" CreationDate="2015-10-09T18:50:52.190" Score="1" ViewCount="221" Body="&lt;p&gt;My computer is running elementary OS freya , but after working for some time my computer freezes. I can move the cursor all right but when I click on anything it does not respond. if i shut down my computer, it does not run, and charges % 2 remain. if you change battery, it computer run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 245GB system and 250GB other partition and 2GB swap.&lt;/p&gt;&#xA;" OwnerUserId="2721" LastEditorUserId="3757" LastEditDate="2016-04-23T11:58:11.527" LastActivityDate="2016-04-23T11:58:11.527" Title="elementary OS Freya System Crashes" Tags="|release-freya|system|power|battery|" AnswerCount="0" CommentCount="1" ClosedDate="2019-04-25T15:09:26.320" ContentLicense="CC BY-SA 3.0" />
  <row Id="2415" PostTypeId="1" CreationDate="2015-10-09T19:13:53.687" Score="3" ViewCount="1700" Body="&lt;p&gt;I am trying to install LibreOffice 5.0 on Freya 64 bit. This is a fresh install and does not have any previous versions of LibreOffice. When I apply the LibreOffice fresh official PPA, I get an error saying that &lt;code&gt;python3-uno&lt;/code&gt; will not be installed.&#xA;This is the exact error message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;libreoffice : Depends: python3-uno (&amp;gt;= 4.4.0~beta2) but it is not going to be installed.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have checked that my system does not have any version of &lt;code&gt;python3-uno&lt;/code&gt; installed. And also the PPA does not provide its own version. Since I am coming from Arch Linux, I am not used to frozen software. I really like the elementary user interface. Any help on installing the latest version LibreOffice will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2722" LastEditorUserId="242" LastEditDate="2016-03-14T21:24:39.083" LastActivityDate="2016-03-14T21:24:39.083" Title="LibreOffice 5 PPA installation" Tags="|release-freya|libreoffice|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2416" PostTypeId="2" ParentId="2415" CreationDate="2015-10-09T20:58:16.797" Score="3" Body="&lt;p&gt;Solved it. It was actually very simple and my fault. Coming from arch, i don't know how ubuntu based systems are supposed to work. I just installed the repository version of libreoffice and then added the ppa. The upgrade was flawless and I am running libreoffice 5.&lt;/p&gt;&#xA;" OwnerUserId="2722" LastActivityDate="2015-10-09T20:58:16.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2417" PostTypeId="2" ParentId="2411" CreationDate="2015-10-09T21:00:37.387" Score="2" Body="&lt;p&gt;Try &#xA;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should solve any missing codecs problem.&lt;/p&gt;&#xA;" OwnerUserId="2722" LastActivityDate="2015-10-09T21:00:37.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2419" PostTypeId="1" CreationDate="2015-10-09T22:27:46.753" Score="1" ViewCount="276" Body="&lt;p&gt;I was contemplating uninstalling pantheon-files completely from elementary OS Freya 0.3.1.. Would this action break my system? I've checked the dependencies in Synaptic Package Manager but I can't make heads or tails of what any of it means to my system. Thanks for your time.&lt;/p&gt;&#xA;" OwnerUserId="2725" LastActivityDate="2015-10-10T04:37:38.120" Title="Will it break my system (elementary OS Freya 0.3.1) if I completely remove pantheon-files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2420" PostTypeId="2" ParentId="2419" CreationDate="2015-10-09T22:52:24.927" Score="2" Body="&lt;p&gt;Haven't try it yet, but I don't see much of a problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS is build on top of Ubuntu. And Ubuntu works fine without Pantheon Files :D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just remember to install Nautilus, Dolphin or other file manager if you don't want to see your files only via terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it happens to remove other features from elementary OS, just reinstall the package &lt;code&gt;elementary-desktop&lt;/code&gt;. That should reinstall all the packages needed for elementary, including the pantheon-files.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="138" LastEditDate="2015-10-10T04:37:38.120" LastActivityDate="2015-10-10T04:37:38.120" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2421" PostTypeId="1" AcceptedAnswerId="2422" CreationDate="2015-10-09T23:32:32.727" Score="3" ViewCount="637" Body="&lt;p&gt;Update:  I found a solution!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1/1884#1884&quot;&gt;I am having the same problem as this person, but the solution is not working for me.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am booted into a grub prompt with minimal bash editing. My partitions are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;boot loader in /dev/sda&lt;/li&gt;&#xA;&lt;li&gt;/boot in sda7 (Primary Ext2)&lt;/li&gt;&#xA;&lt;li&gt;Swap in sda8 (Logical)&lt;/li&gt;&#xA;&lt;li&gt;/ in sda9 (Logical Ext4)&lt;/li&gt;&#xA;&lt;li&gt;/home in sda10 (Logical Ext4)&lt;/li&gt;&#xA;&lt;li&gt;The rest are windows partitions (dual boot)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So I tried the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile (hd0, gpt9)/boot/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which only gets me: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: filename expected&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried all the other partitions (1 through 10) just to be sure, but they all get the same error.  &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Miscellaneous&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I enter &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile (hd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hd0 hd1error: failure reading sector 0xfc from 'hd1'.&#xA;error: failure reading sector 0xe0 from 'hd1'.&#xA;error: failure reading sector 0x0 from 'hd1'.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I enter: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile (hd0,gpt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get {I leave out the partition sizes after gpt2, but they are there.  I can retrieve them if necessary}:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Possible partitions are:&#xA;Partition hd0,gpt1:  Filesystem type fat - Label 'SYSTEM', UUID 14E4-FCC4 - Partition start at 1024KiB - Total size 102400KiB&#xA;Partition hd0,gpt2:  No known filesystem detected - Partition start at 103424KiB - Total size 921600KiB&#xA;Partition hd0,gpt3:  No known filesystem detected &#xA;Partition hd0,gpt4:  No known filesystem detected &#xA;Partition hd0,gpt5:  No known filesystem detected &#xA;Partition hd0,gpt6:  No known filesystem detected &#xA;Partition hd0,gpt7:  Filesystem type ext* - Last modification time 2015-10-09 20:11:06 Friday, UUID d9e87737-12df-4b32-98fb-c928101860a0&#xA;Partition hd0,gpt8:  No known filesystem detected &#xA;Partition hd0,gpt9:  Filesystem type ext* - Last modification time 2015-10-09 20:05:04 Friday, UUID 6322aa7b-461e-493a-9d50-d03e83e1e543&#xA;Partition hd0,gpt10:  Filesystem type ext* - Last modification time 2015-10-09 20:05:09 Friday, UUID 4415c308-5b3f-47eb-b1f1-f69d8c39e00b&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2654" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-12T17:37:17.380" Title="Bootloader Issue with Freya" Tags="|boot|grub|uefi|" AnswerCount="1" CommentCount="3" ClosedDate="2015-10-21T13:45:29.393" ContentLicense="CC BY-SA 3.0" />
  <row Id="2422" PostTypeId="2" ParentId="2421" CreationDate="2015-10-10T00:18:04.503" Score="3" Body="&lt;p&gt;I found a solution hidden in the comments.  Run this on your grub screen:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile /efi/grub/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and hit tab (you may need to wait half a minute for it to load)&#xA;It should give you a list of possible files. I chose cfg&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile /efi/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2654" LastActivityDate="2015-10-10T00:18:04.503" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2423" PostTypeId="1" AcceptedAnswerId="2425" CreationDate="2015-10-10T01:47:28.233" Score="-1" ViewCount="218" Body="&lt;p&gt;I am a regular user of Ubuntu, also used Arch in VM. I recently installed elementary OS. I like to use &lt;code&gt;commands&lt;/code&gt; from terminal for installation or to launch an application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: Which distribution is elementary OS based on?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="26" LastEditDate="2015-10-12T17:25:11.057" LastActivityDate="2015-10-12T17:25:11.057" Title="What Linux Distribution is elementary OS based on?" Tags="|release-freya|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2424" PostTypeId="1" CreationDate="2015-10-10T02:06:56.237" Score="1" ViewCount="281" Body="&lt;p&gt;I installed &lt;a href=&quot;https://github.com/neurobin/MT7630E&quot; rel=&quot;nofollow&quot;&gt;this WiFi driver&lt;/a&gt;, as I have Mediatek MT7630E.  It connects and works pretty well, but whenever it disconnects my computer freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I tried blacklisting some drivers:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and added&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blacklist eth0&#xA;blacklist eth0_cs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it still freezes. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Details&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got eth0 from running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ iwconfig&#xA;eth0      no wireless extensions.&#xA;&#xA;wlan0     IEEE 802.11bgn  ESSID:off/any  &#xA;          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   &#xA;          Retry short limit:7   RTS thr:off   Fragment thr:off&#xA;          Power Management:off&#xA;&#xA;lo        no wireless extensions.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;wlan0 seems to be the one that connects when my WiFi is turned on.&lt;/p&gt;&#xA;" OwnerUserId="2654" LastActivityDate="2015-10-10T09:12:58.840" Title="WiFi Driver Freezes" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2425" PostTypeId="2" ParentId="2423" CreationDate="2015-10-10T02:14:32.203" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS&quot; rel=&quot;nofollow&quot;&gt;It is based on Ubuntu.&lt;/a&gt;  See the first sentence of the Wikipedia page.  So all your regular commands should work well with it.&lt;/p&gt;&#xA;" OwnerUserId="2654" LastActivityDate="2015-10-10T02:14:32.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2426" PostTypeId="2" ParentId="2388" CreationDate="2015-10-10T02:19:04.440" Score="0" Body="&lt;p&gt;I just went through this issue myself.  It looks like you already saw &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1/1884#1884&quot;&gt;this&lt;/a&gt;, so I would recommend the following instead:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2421/bootloader-issue-with-freya&quot;&gt;Bootloader Issue with Freya&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2654" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-11T20:28:58.333" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2427" PostTypeId="1" AcceptedAnswerId="2428" CreationDate="2015-10-10T05:13:06.430" Score="0" ViewCount="4061" Body="&lt;p&gt;How to configure Firewall Configuration for elementary OS in non-GUI and GUI ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any GUI ufw available?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T02:55:29.000" LastActivityDate="2015-10-11T02:55:29.000" Title="ufw firewall (command line and GUI) for elementary OS" Tags="|release-freya|firewall|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2428" PostTypeId="2" ParentId="2427" CreationDate="2015-10-10T05:13:25.460" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;By default &lt;code&gt;ufw&lt;/code&gt; (Uncomplicated Firewall) installed in elementary OS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;code&gt;enable&lt;/code&gt; open terminal and run the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw enable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To verify &lt;code&gt;status&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw status&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For more information about &lt;code&gt;ufw&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;man ufw&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;There is a default GUI firewall in elementary OS,refer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2427/ufw-firewall-command-line-and-gui-for-elementary-os/2429#2429&quot;&gt;here&lt;/a&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gufw&lt;/code&gt; is GUI for &lt;code&gt;ufw&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gufw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/FzW3C.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5mHfv.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-10-10T12:28:38.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2429" PostTypeId="2" ParentId="2427" CreationDate="2015-10-10T07:56:15.357" Score="4" Body="&lt;p&gt;Since version 0.3 elementary OS has it's own graphical configuration interface for &lt;code&gt;ufw&lt;/code&gt;.&lt;br&gt;&#xA;You can find it in &lt;em&gt;System Settings -&gt; Security &amp;amp; Privacy -&gt; Firewall&lt;/em&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/um0sv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/um0sv.png&quot; alt=&quot;Firewall configuration&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, there is no need anymore for installing &lt;code&gt;gufw&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-10-10T07:56:15.357" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2430" PostTypeId="1" AcceptedAnswerId="2431" CreationDate="2015-10-10T08:32:49.953" Score="0" ViewCount="224" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Where can I search for elementary OS PPA's ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used to search Ubuntu PPA's in &lt;a href=&quot;https://launchpad.net/&quot; rel=&quot;nofollow&quot;&gt;launchpad&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Which version of Ubuntu PPA's can I use in  elementary OS?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since there are different versions and also LTS and non LTS difference in Ubuntu&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-10T08:41:30.037" Title="elementary OS PPA's" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2431" PostTypeId="2" ParentId="2430" CreationDate="2015-10-10T08:41:30.037" Score="2" Body="&lt;p&gt;Since the currently supported version of elementary OS (0.3 Freya) is based upon the current LTS version of Ubuntu (14.04)*, anything that works with Trusty should work just fine in elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, any app that has a PPA dedicated to Trusty on Launchpad should work as expected. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Note that the hardware stack in 0.3.1 was actually based upon 15.04&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-10T08:41:30.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2432" PostTypeId="2" ParentId="2424" CreationDate="2015-10-10T09:12:58.840" Score="1" Body="&lt;p&gt;&lt;code&gt;eth0&lt;/code&gt; is your ethernet port. It shouldn't have any bearing on the WiFi driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The driver you have installed is a modified version of &lt;a href=&quot;https://web.archive.org/web/20150315002024/http://mediatek.com/en/downloads/mt7630-pcie/&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; official driver. That page mentions the driver only supports kernels 3.13 &amp;amp; 3.14, though elementary is shipped with newer kernels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the &lt;em&gt;'modifications and fixes'&lt;/em&gt; may make it work on later kernel versions, I'd imagine you will have more luck posting a bug report on the github bug tracker where you obtained the driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's worth noting that there appears to be several forks of this driver. I suggest reading through this &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1220146&quot; rel=&quot;nofollow&quot;&gt;thread&lt;/a&gt; as it contains contributions from the author of your modified version and several others. You may find one of the other forks works better for you. Note the very last post on that thread is by someone with your issue.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-10-10T09:12:58.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2434" PostTypeId="2" ParentId="1399" CreationDate="2015-10-10T12:55:41.253" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter username and password&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -f install`&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-10T12:55:41.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2435" PostTypeId="2" ParentId="2234" CreationDate="2015-10-10T13:24:02.067" Score="1" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount /dev/sda6 /mnt&#xA;sudo grub-install --boot-directory=/mnt/boot /dev/sda&#xA;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: In first command /dev/sda6 is elementary OS  &lt;code&gt;/root&lt;/code&gt; partition.Replace &lt;code&gt;6&lt;/code&gt; with your partition number.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-08T16:20:50.343" LastActivityDate="2016-01-08T16:20:50.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2436" PostTypeId="1" CreationDate="2015-10-10T13:41:32.757" Score="1" ViewCount="848" Body="&lt;p&gt;I installed elementary OS 0.3.1 yesterday. &lt;br&gt;&#xA;I'm not getting the fullscreen. &lt;br&gt;&#xA;How can I get elementary OS to display fullscreen and also then use the actual full screen and not the given resolution? &lt;br&gt;&#xA;The rest is now black.&lt;/p&gt;&#xA;" OwnerUserId="2729" LastEditorUserId="3757" LastEditDate="2016-05-05T09:03:32.583" LastActivityDate="2016-05-05T09:03:32.583" Title="elementary OS is not fullscreen" Tags="|display|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2437" PostTypeId="2" ParentId="2436" CreationDate="2015-10-10T14:01:27.777" Score="1" Body="&lt;p&gt;adjust the resolution in settings, it's found at &lt;strong&gt;displays&lt;/strong&gt; option when you click the gear icon, you should set it to maximum value available.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-10T14:01:27.777" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2438" PostTypeId="2" ParentId="1986" CreationDate="2015-10-10T15:09:24.467" Score="2" Body="&lt;p&gt;It seems you have more &lt;strong&gt;unused&lt;/strong&gt; kernels:(Open terminal and run the commands)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I suggest boot to latest kernel)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Remove Manually&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First list current kernel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example output:&lt;code&gt;3.19.0-28-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To list all kernels :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now purge old kernels manually,(be sure don't purge current kernel)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge linux-image-3.16.0-34 linux-image-3.16.0-46 linux-image-3.16.0-48 linux-image-3.16.0-49 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: In general to remove old kernels use &lt;code&gt;linux-image-x.x.x-x&lt;/code&gt; where replace x with numbers.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Automatic&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge $(dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/ii/{print $2}' | grep -ve &quot;$(uname -r | sed -r 's/-[a-z]+//')&quot;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: you can verify deleting kernels with following command-here the output &lt;strong&gt;excludes current loaded/running kernel&lt;/strong&gt; .So please boot to latest kernel.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;kernelver=$(uname -r | sed -r 's/-[a-z]+//')&#xA;dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/ii/{print $2}' | grep -ve $kernelver&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://help.ubuntu.com/community/Lubuntu/Documentation/RemoveOldKernels&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alternative&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use &lt;code&gt;synaptic&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install &lt;code&gt;synaptic&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;please refer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/95/how-to-remove-old-kernel-versions/2468#2468&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-10-11T13:20:14.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2440" PostTypeId="1" AcceptedAnswerId="2448" CreationDate="2015-10-10T16:14:39.093" Score="5" ViewCount="701" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i0nNB.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i0nNB.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No option to add online accounts under system settings.&lt;/p&gt;&#xA;" OwnerUserId="2662" LastActivityDate="2015-10-11T00:03:00.203" Title="Where is the option to add online accounts listed? It certainly isn't under settings in my system!" Tags="|settings|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2441" PostTypeId="2" ParentId="2440" CreationDate="2015-10-10T18:21:43.397" Score="1" Body="&lt;p&gt;It &lt;em&gt;should&lt;/em&gt; be right there next to the Network icon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VyJwe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VyJwe.png&quot; alt=&quot;system settings in elementary OS Freya&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all, verify that you have appropriate packages installed. You might have accidentally removed some of them. Here's the list of packages you need:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mDv9H.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mDv9H.png&quot; alt=&quot;the list of online accounts packages&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The most important one is the first one (&lt;code&gt;libpantheon-online-accounts0&lt;/code&gt;) so you could try fixing this error by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libpantheon-online-accounts0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, you should try running &lt;code&gt;switchboard&lt;/code&gt; from the terminal and see if you'll get any errors when executing it. If so, please update your question and post the errors you're getting and I'll do my best to see what went wrong.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-10T18:21:43.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2443" PostTypeId="1" CreationDate="2015-10-10T19:57:23.030" Score="9" ViewCount="14849" Body="&lt;p&gt;The default Software Updater was not working correctly. It was giving the message &quot;An upgrade from 'freya' to 'trusty' is not supported with this tool.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And rebooted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the reboot I am unable to login. I type my password, the screen goes black as if it was going to login, and I'm back at the same screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can tell the password is correct because when I type the wrong password, it gives that shaking animation. I even tried using the on-screen keyboard to type my password, so I know it's not a problem with my keyboard configuration or anything like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I am not able to login with the guest account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me?&lt;/p&gt;&#xA;" OwnerUserId="2732" LastEditorUserId="2732" LastEditDate="2015-10-10T20:04:55.833" LastActivityDate="2021-09-22T22:12:14.423" Title="Can't login after upgrade" Tags="|release-freya|greeter|updates|" AnswerCount="11" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2444" PostTypeId="1" CreationDate="2015-10-10T21:04:05.013" Score="2" ViewCount="84" Body="&lt;p&gt;This has been annoying me a lot recently. Is there a way to disable the &quot;Run&quot; context menu for some specific mimetypes to make it always &quot;Open with &lt;code&gt;&amp;lt;insert default application here&amp;gt;&lt;/code&gt;?&quot; For some reason it's not remembering my default application for Lua files.&#xA;No matter how many times I hit &quot;Open with&quot; and keep the &quot;Keep as default&quot; option checked, I have to repeat the same thing every time. I don't want to run it, I want to open it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hs4SY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hs4SY.png&quot; alt=&quot;Blank open with submenu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked up some stuff and tried editing the mimetype section in the applications desktop entry, but that seems to have no effect.&#xA;I would appreciate if anyone knows how to change this. By the way, I'm using sublime-text-3 if that matters at all.&lt;/p&gt;&#xA;" OwnerUserId="2733" LastActivityDate="2016-09-17T15:47:31.340" Title="&quot;Open with&quot; context menu option not remembering my selection and always showing Run no matter what" Tags="|release-freya|applications|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2446" PostTypeId="1" CreationDate="2015-10-10T22:31:43.960" Score="1" ViewCount="114" Body="&lt;p&gt;I am trying to compile the Dolphin emulator by following &lt;a href=&quot;https://wiki.dolphin-emu.org/index.php?title=Building_Dolphin_on_Linux#Other_Linux_Distributions&quot; rel=&quot;nofollow&quot;&gt;this guide&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But during the make install step, I get these errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make[2]: ** [Source/Core/InputCommon/CMakeFiles/inputcommon.dir/Src/ControllerEmu.cpp.o] Error 1&#xA;make[1]: *** [Source/Core/InputCommon/CMakeFiles/inputcommon.dir/all] Error 2&#xA;make: *** [all] Error 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It seems to be problems with Libx and I have tried to reinstall the libx11-dev and libx11-6 packages, but that didn't do anything.&lt;/p&gt;&#xA;" OwnerUserId="2558" LastEditorUserId="3757" LastEditDate="2016-04-23T11:57:09.513" LastActivityDate="2016-04-23T11:57:09.513" Title="Errors when compiling Dolphin emulator (libx)" Tags="|release-freya|software-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2448" PostTypeId="2" ParentId="2440" CreationDate="2015-10-11T00:03:00.203" Score="4" Body="&lt;p&gt;Online accounts hasn't been released into stable yet. You won't have it on a clean install. It's still in development.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-11T00:03:00.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2449" PostTypeId="2" ParentId="2402" CreationDate="2015-10-11T00:06:55.283" Score="1" Body="&lt;p&gt;First off, both of those processors are a 2010 vintage, and HEVC is a relatively new format, however it certainly doesn't &lt;em&gt;require&lt;/em&gt; a dual core. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Neither are performing better, the graphics on the i3 is a 5 year old integrated chip, whereas the Pentium didn't have integrated, so the dedicated card from around the same time is out performing it, as it should be.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;         | Pentium T4500 | Core i3-380M&#xA;---------|---------------|--------------&#xA;Release  | Q1/2010       | Q3/2010&#xA;Cores    | 2             | 2&#xA;Threads  | 2             | 4&#xA;Speed    | 2.3 GHz       | 2.53 GHz&#xA;Graphics | None          | Integrated (667 MHz)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notably, the &lt;a href=&quot;http://ark.intel.com/products/42925/Intel-Pentium-Processor-T4500-1M-Cache-2_30-GHz-800-MHz-FSB&quot; rel=&quot;nofollow&quot;&gt;Intel Pentium T4500&lt;/a&gt; is listed without a Graphics processor, but with two cores, whereas the &lt;a href=&quot;http://ark.intel.com/products/50178/Intel-Core-i3-380M-Processor-3M-Cache-2_53-GHz&quot; rel=&quot;nofollow&quot;&gt;Intel Core i3-380M&lt;/a&gt; is listed not only as two cores but running four threads. The slowdown is likely the integrated graphics on the i3-380M unit which by today's standards are ancient, and will likely have issues playing most HD video, regardless of format, although that is HEVCs primary use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason the older, slower, and less threads (same amount of cores, 2) Pentium is winning out is because that model &lt;em&gt;doesn't&lt;/em&gt; have integrated graphics, and as such will be using a dedicated card.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-10-11T00:06:55.283" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2450" PostTypeId="2" ParentId="903" CreationDate="2015-10-11T01:32:37.800" Score="4" Body="&lt;p&gt;After installing elementry OS, Once you’re rebooted and logged back in, go to the “&lt;code&gt;Devices&lt;/code&gt;” menu on your virtual machine’s window and select “&lt;code&gt;Insert Guest Additions CD image&lt;/code&gt;.”&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before installing them, install the &lt;code&gt;dkms&lt;/code&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you’ll want to mount the Guest Additions image. The easiest way is to open up Files from Slingshot application launcher and select it under “&lt;code&gt;Devices&lt;/code&gt;” at the side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then open a terminal and &lt;code&gt;cd&lt;/code&gt; (change the directory) to where the image is mounted, for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /media/VBOXADDITIONS_4.3.12_93733$ sudo ./VBoxLinuxAdditions.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now reboot.&lt;/p&gt;&#xA;" OwnerUserId="2735" LastEditorUserId="2708" LastEditDate="2015-10-11T07:44:20.593" LastActivityDate="2015-10-11T07:44:20.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2451" PostTypeId="5" CreationDate="2015-10-11T03:01:31.437" Score="0" Body="&lt;p&gt;In computing, a firewall is a software or hardware-based network security system that controls the incoming and outgoing network traffic by analyzing the data packets and determining whether they should be allowed through or not, based on applied rule set&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T07:44:26.643" LastActivityDate="2015-10-11T07:44:26.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2452" PostTypeId="4" CreationDate="2015-10-11T03:01:31.437" Score="0" Body="Acting as a barrier between a trusted network and other untrusted networks. A computer firewall is more of a filter than a wall, allowing trusted data to flow through it." OwnerUserId="2708" LastEditorUserId="26" LastEditDate="2015-10-11T07:45:12.457" LastActivityDate="2015-10-11T07:45:12.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2453" PostTypeId="1" AcceptedAnswerId="2454" CreationDate="2015-10-11T03:39:34.617" Score="2" ViewCount="719" Body="&lt;p&gt;The output of &lt;code&gt;sudo apt-get update&lt;/code&gt; gives the error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Fetched 64.4 kB in 18s (3,524 B/s)                                             &#xA;Reading package lists... Done&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/universe amd64 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_universe_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/multiverse amd64 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_multiverse_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/restricted amd64 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_restricted_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/main amd64 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_main_binary-amd64_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/universe i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_universe_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/multiverse i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_multiverse_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/restricted i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_restricted_binary-i386_Packages)&#xA;W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ trusty-security/main i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_main_binary-i386_Packages)&#xA;W: You may want to run apt-get update to correct these problems&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T04:06:17.960" LastActivityDate="2015-11-10T02:28:26.907" Title="update error-duplicate entries" Tags="|updates|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2454" PostTypeId="2" ParentId="2453" CreationDate="2015-10-11T03:42:43.843" Score="1" Body="&lt;p&gt;I solved it as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are duplicate entries in &lt;code&gt;sources.list&lt;/code&gt;.Before proceeding further observe the error message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is clear that under &lt;code&gt;http://security.ubuntu.com/ubuntu/ trusty-security&lt;/code&gt; --&lt;code&gt;main,universe,restricted,multiverse&lt;/code&gt; have duplicates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Search for &lt;code&gt;http://security.ubuntu.com/ubuntu/ trusty-security&lt;/code&gt; and identify duplicates then keep a &lt;code&gt;#&lt;/code&gt; before duplicate entries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alternative&lt;/strong&gt; (Refer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2455/other-software-tab-entries-in-software-updates&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;Software and Updates&lt;/code&gt;--&gt; &lt;code&gt;Other Software&lt;/code&gt; tab&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then Remove(or just uncheck) duplicate entries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cVXXs.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-10T02:28:26.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2456" PostTypeId="2" ParentId="2443" CreationDate="2015-10-11T04:40:48.240" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Login to tty1 using &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter username and password&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run the command &lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="242" LastEditDate="2015-10-13T03:51:03.757" LastActivityDate="2015-10-13T03:51:03.757" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2457" PostTypeId="2" ParentId="2415" CreationDate="2015-10-11T05:44:51.563" Score="2" Body="&lt;p&gt;Open terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To install LibreOffice 5&lt;/strong&gt; : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/libreoffice-5-0&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T06:59:28.263" LastActivityDate="2015-10-11T06:59:28.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2458" PostTypeId="2" ParentId="2332" CreationDate="2015-10-11T06:16:02.290" Score="1" Body="&lt;p&gt;Yes,&lt;code&gt;python2&lt;/code&gt; and &lt;code&gt;python3&lt;/code&gt; comes in default with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But here &lt;code&gt;python2==python&lt;/code&gt; and &lt;code&gt;python3==python3&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find version of python2:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python -V&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python --version&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To find version of python3:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python3 -V&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python3 --version&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For reference Open terminal and run &lt;code&gt;man python&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-11T06:16:02.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2459" PostTypeId="1" AcceptedAnswerId="2460" CreationDate="2015-10-11T06:41:58.800" Score="10" ViewCount="20506" Body="&lt;p&gt;How can I install the latest version of Libre Office?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is more than 1 way, please provide all of them.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2926" LastEditDate="2015-11-22T02:01:02.773" LastActivityDate="2017-04-01T17:35:24.003" Title="How do I install the latest version of Libre Office?" Tags="|software-installation|libreoffice|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2460" PostTypeId="2" ParentId="2459" CreationDate="2015-10-11T06:45:19.583" Score="19" Body="&lt;p&gt;There are 3 ways.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;From the repositories - (Older version, not recommended):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Libre Office just run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or open Software Centre and search for &quot;Libre Office&quot;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From an official PPA:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This PPA is for version 5.0.X (Recommended): &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/libreoffice-5-0&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: The above PPA provides Libre Office 5.0.X updates. If Libre Office 5.1.X released then we need to use another PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For any version we can use the &lt;code&gt;ppa:libreoffice/ppa PPA&lt;/code&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;LibreOffice X.X.X (Fresh, Latest version - not for production environment):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From the website, using the &lt;code&gt;.deb&lt;/code&gt; files (No auto-update, not recommended):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, visit the Download page. To jump to the &lt;code&gt;.deb&lt;/code&gt; version for &lt;a href=&quot;https://www.libreoffice.org/download/libreoffice-fresh/?type=deb-x86&amp;amp;version=5.0.3&amp;amp;lang=en-GB&quot;&gt;64 bit click here&lt;/a&gt;, or for &lt;a href=&quot;https://www.libreoffice.org/download/libreoffice-fresh/?type=deb-x86&amp;amp;version=5.0.3&amp;amp;lang=en-GB&quot;&gt;32 bit click here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, click Download. Consider using the Torrent file as it reduces the load on their servers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the 229 MB download is finished (which will take 9.5 hours on dial up or 7 minutes on a High Speed T3 connection) you will need to extract the &lt;code&gt;.tar.gz&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to the file in your file manager, right click and chose &quot;Extract Here&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads/LibreOffice5*/DEBS&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, as the &lt;code&gt;README&lt;/code&gt; says you need to run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will take a while, but when the command finishes, you will have Libre Office 5.0&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2926" LastEditDate="2015-11-22T23:38:40.377" LastActivityDate="2015-11-22T23:38:40.377" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2461" PostTypeId="1" CreationDate="2015-10-11T07:52:17.333" Score="5" ViewCount="10622" Body="&lt;p&gt;I am using elementary OS Freya and the wingpanel is missing. Only the dock is showing. No other option for application, shutdown, volume control, is displayed. The whole wingpanel is missing. Please help me to resolve this issue. I do not want to reinstall the OS.&lt;/p&gt;&#xA;" OwnerUserId="2737" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:36.890" LastActivityDate="2017-07-23T23:59:59.917" Title="Freya menu bar (Wingpanel) is missing" Tags="|release-freya|wingpanel|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2462" PostTypeId="2" ParentId="2443" CreationDate="2015-10-11T09:54:23.607" Score="6" Body="&lt;p&gt;I don't have a crystal ball, but I suppose to look for .Xauthority in your home folder, there might be a permission problem:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press CTRL+ALT+F1 (but if you on mackbook do CTRL+FN+F1) to get to a prompt, and login. &lt;/li&gt;&#xA;&lt;li&gt;Check the permissions and owner of your home directory: &lt;code&gt;ls -l ~/.Xauthority&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Change the owner of the file, if it is not yours, by &lt;code&gt;chown username:username .Xauthority&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="34" LastEditorUserId="-1" LastEditDate="2017-11-06T20:10:47.333" LastActivityDate="2017-11-06T20:10:47.333" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2463" PostTypeId="5" CreationDate="2015-10-11T11:52:53.697" Score="0" Body="&lt;p&gt;LibreOffice is a free and open source office suite, developed by The Document Foundation. It comes with its own word processor (Writer), spreadsheet tool (Calc), presentation tool (Impress), drawing package (Draw) and database manager (Base).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;External Links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/LibreOffice&quot; rel=&quot;nofollow&quot;&gt;wiki/LibreOffice&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ask.libreoffice.org/en/questions/&quot; rel=&quot;nofollow&quot;&gt;ask.libreoffice.org&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-22T16:46:31.357" LastActivityDate="2015-10-22T16:46:31.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2464" PostTypeId="4" CreationDate="2015-10-11T11:52:53.697" Score="0" Body="LibreOffice is a third-party office suite that can be installed from the Software Center. It comes with its own word processor (Writer), spreadsheet tool (Calc), presentation tool (Impress), drawing package (Draw) and database manager (Base)." OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-22T16:47:12.630" LastActivityDate="2015-10-22T16:47:12.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2465" PostTypeId="2" ParentId="2461" CreationDate="2015-10-11T12:03:44.310" Score="2" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-applet&#xA;sudo apt-get install indicator-application&#xA;sudo apt-get install indicator-applet-complete&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that not working,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure the &lt;code&gt;/etc/xdg/autostart/indicator-[name].desktop&lt;/code&gt; file contains&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;XFCE;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example,Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/autostart/indicator-datetime.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then output should be like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Indicator Date &amp;amp; Time&#xA;Exec=/usr/lib/x86_64-linux-gnu/indicator-datetime/indicator-datetime-service&#xA;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;NoDisplay=true&#xA;StartupNotify=false&#xA;Terminal=false&#xA;AutostartCondition=GNOME3 unless-session gnome&#xA;X-Ubuntu-Gettext-Domain=indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T12:16:32.610" LastActivityDate="2015-10-11T12:16:32.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2467" PostTypeId="2" ParentId="95" CreationDate="2015-10-11T13:00:08.150" Score="2" Body="&lt;p&gt;Removing old kernels:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I suggest boot to latest kernel)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Remove Manually&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First list current kernel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example output:&lt;code&gt;3.19.0-28-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To list all kernels :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now purge old kernels manually,(be sure don't purge current kernel)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge linux-image-3.16.0-34 linux-image-3.16.0-46 linux-image-3.16.0-48 linux-image-3.16.0-49 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: In general to remove old kernels use &lt;code&gt;linux-image-x.x.x-x&lt;/code&gt; where replace x with numbers.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Automatic&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge $(dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/ii/{print $2}' | grep -ve &quot;$(uname -r | sed -r 's/-[a-z]+//')&quot;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: you can verify deleting kernels with following command-here the output &lt;strong&gt;excludes current loaded/running kernel&lt;/strong&gt; .So please boot to latest kernel.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;kernelver=$(uname -r | sed -r 's/-[a-z]+//')&#xA;dpkg -l linux-{image,headers}-&quot;[0-9]*&quot; | awk '/ii/{print $2}' | grep -ve $kernelver&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://help.ubuntu.com/community/Lubuntu/Documentation/RemoveOldKernels&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T13:23:31.300" LastActivityDate="2015-10-11T13:23:31.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2468" PostTypeId="2" ParentId="95" CreationDate="2015-10-11T13:01:48.810" Score="2" Body="&lt;p&gt;To remove old kernels you can also use &lt;code&gt;synaptic&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install synaptic:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now open synaptic and search for &lt;code&gt;linux-image&lt;/code&gt; under &lt;code&gt;installed&lt;/code&gt; tab as shown and then&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click on selected old kernel and select &lt;code&gt;mark for complete removal&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/CL7D0.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/R1KU0.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: Screenshots are only examples from my system.I already deleted old kernels.Please select old kernels as per your system.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-11T13:22:32.540" LastActivityDate="2015-10-11T13:22:32.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2469" PostTypeId="1" AcceptedAnswerId="2470" CreationDate="2015-10-11T14:54:28.293" Score="6" ViewCount="9675" Body="&lt;p&gt;Similar to the Ubuntu Tweak Tool, elementary OS has a Settings plugin that adds a number of new options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to install elementary-tweaks on Freya.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="16827" LastEditDate="2019-04-13T08:20:50.087" LastActivityDate="2019-04-13T08:20:50.087" Title="How to install elementary tweaks on Freya" Tags="|release-freya|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2470" PostTypeId="2" ParentId="2469" CreationDate="2015-10-11T14:57:47.123" Score="9" Body="&lt;p&gt;In order to install elementary tweaks you have to add a PPA. Make sure of knowing the dangers of adding PPAs beforehand.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;elementary OS 0.4 Loki&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Make sure you have installed the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7508/68&quot;&gt;program for adding PPAs&lt;/a&gt;. Run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;According to project page: &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;elementary OS 0.3 Freya&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL  http://i-hate-farms.github.io/spores/install | sudo bash - &#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://github.com/I-hate-farms/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;I hate farms ~ GitHub&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;elementary OS 0.2 Luna&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:versable/elementary-tweaks-isis&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow noreferrer&quot;&gt;Versable ~ Elementary Update&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="68" LastEditDate="2018-08-04T21:57:01.703" LastActivityDate="2018-08-04T21:57:01.703" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="2472" PostTypeId="1" CreationDate="2015-10-11T21:25:59.590" Score="4" ViewCount="737" Body="&lt;p&gt;What graphical tool can I use to configure for example 2 HDDs in a RAID 1?&lt;/p&gt;&#xA;" OwnerUserId="115" LastEditorUserId="3757" LastEditDate="2016-04-23T11:54:10.383" LastActivityDate="2016-10-01T07:58:47.037" Title="How to configure a Software RAID?" Tags="|storage|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2473" PostTypeId="1" CreationDate="2015-10-11T23:38:27.487" Score="1" ViewCount="36" Body="&lt;p&gt;When I try to install, it will ask me to erase all data or something else. It says no OS installed either. I looked it up and it's supposed to say install alongside Mac OS X. How can I fix this and make it show up?&lt;/p&gt;&#xA;" OwnerUserId="2742" LastEditorUserId="5565" LastEditDate="2016-10-07T02:31:41.633" LastActivityDate="2016-10-07T02:31:41.633" Title="Won't detect Mac OS X when I try to install" Tags="|system-installation|dual-boot|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-09T00:12:53.757" ContentLicense="CC BY-SA 3.0" />
  <row Id="2474" PostTypeId="1" CreationDate="2015-10-12T00:52:41.843" Score="8" ViewCount="1332" Body="&lt;p&gt;After a system update the indicators and the clock (wing panel) is taking a long time to appear, has anyone experienced something similar? Or know how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="2743" LastEditorUserId="5565" LastEditDate="2016-10-02T14:34:38.503" LastActivityDate="2016-10-02T14:34:38.503" Title="Freya Wingpanel taking a long time to load after update" Tags="|release-freya|wingpanel|updates|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2476" PostTypeId="1" AcceptedAnswerId="2477" CreationDate="2015-10-12T03:43:26.307" Score="7" ViewCount="2094" Body="&lt;p&gt;How to install elementary OS using the &lt;em&gt;'Something else'&lt;/em&gt; option at the partitioning step.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="137" LastEditDate="2015-10-14T12:39:49.417" LastActivityDate="2018-11-08T09:08:56.877" Title="Install elementary OS in dual boot with 'something else' option" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2477" PostTypeId="2" ParentId="2476" CreationDate="2015-10-12T03:43:54.983" Score="3" Body="&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; : This can also be used to reinstall elementary OS. To reinstall skip the partition steps.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;Partitoning&lt;/strong&gt; :&lt;/p&gt;&#xA;&lt;p&gt;Before using &lt;em&gt;something else&lt;/em&gt; option allocate space to install elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;Open Gparted then select partiton you want to allocate for elementary OS.&#xA;Right click --&amp;gt; &lt;strong&gt;Delete.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Step1&lt;/strong&gt;: Now right click on the partition --&amp;gt; New --&amp;gt; &lt;strong&gt;extended partition.&lt;/strong&gt; and &lt;strong&gt;ext4&lt;/strong&gt; File system.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jsUWS.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Step2&lt;/strong&gt; : Make Partitions for &lt;code&gt;swap&lt;/code&gt;, &lt;code&gt;/root&lt;/code&gt; and &lt;code&gt;/home&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now Right click on the &lt;code&gt;/sda2&lt;/code&gt; and select &lt;code&gt;Resize/Move&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here -- sda2  extended&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;   sda5 format swap - &#xA;   sda6 format ext4 - &#xA;   sda7 format ext4 -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You can choose &lt;code&gt;swap &lt;/code&gt; size same as size of your RAM. Generally 4GB swap is enough.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;20 GiB&lt;/code&gt; is enough for &lt;code&gt;/root&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;system specifications&lt;/a&gt;, &lt;em&gt;at least&lt;/em&gt; 15 GB of disk space needed.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;/home&lt;/code&gt; is the filesystem for your user's files: documents, images, music and videos&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kJxGy.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Now your partition table similar to like this:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yDios.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;Installation&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Now start installing and then select &lt;code&gt;something else&lt;/code&gt; option.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yJ7EM.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Now,&lt;/p&gt;&#xA;&lt;p&gt;select &lt;code&gt;/sda5&lt;/code&gt; --&amp;gt; click on &lt;kbd&gt;change&lt;/kbd&gt; button (at left corner) you will see popup like this:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/qSD5K.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Now click on drop down button select &lt;code&gt;swap area&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/8VTsn.jpg&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Similarly for &lt;code&gt;/sda6&lt;/code&gt; and &lt;code&gt;/sda7&lt;/code&gt; select &lt;code&gt;ext4 /&lt;/code&gt; and &lt;code&gt;ext4 /home&lt;/code&gt; respectively.&lt;/p&gt;&#xA;&lt;p&gt;Now click on &lt;kbd&gt;Install Now&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-11-08T09:08:56.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2478" PostTypeId="2" ParentId="276" CreationDate="2015-10-12T04:33:25.397" Score="1" Body="&lt;p&gt;&lt;strong&gt;OneGrive&lt;/strong&gt; : Google Drive Clint &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 1:  &lt;a href=&quot;https://www.thefanclub.co.za/sites/all/modules/pubdlcnt/pubdlcnt.php?file=https://www.thefanclub.co.za/sites/default/files/public/overgrive/overgrive_3.1.2_all.deb&amp;amp;nid=168&quot; rel=&quot;nofollow&quot;&gt;Download the latest version of overGrive DEB here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 2: Launch OneGrive &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 3: A window will appear ,click on &lt;kbd&gt;Connect account&lt;/kbd&gt; then a  browser window will open for you to &lt;code&gt;sign in&lt;/code&gt; to your Google account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 4: At the end you will get a &lt;strong&gt;code&lt;/strong&gt; ,copy that code and paste it in the Onedrive window at &lt;strong&gt;Account&lt;/strong&gt; entry box and click &lt;kbd&gt;validate&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 5: After setting your preferences (like location etc...) click &lt;kbd&gt;Start Sync&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Reference &lt;a href=&quot;https://www.thefanclub.co.za/overgrive/installation-instructions-ubuntu&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-13T09:28:56.840" LastActivityDate="2015-10-13T09:28:56.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2480" PostTypeId="1" CreationDate="2015-10-12T07:22:23.063" Score="3" ViewCount="809" Body="&lt;p&gt;I've a problem when I'm installing elementary OS Freya on a Sony VAIO 13&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all I read all the posts on the forum which treat that subject&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is when I install elementary OS, after installing it rebooted automatically and at the boot I've got a GRUB Screen : &quot;Grub &gt; ...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how to fix it. I've change some configuration in my BIOS (disabled UEFI and Secure Boot) but nothing has changed. I've tried to fix the problem by &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;following these steps&lt;/a&gt;, but it didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, when I boot on my USB drive and if I choose &quot;Try elementary&quot; instead of &quot;Install&quot; it works, and runs fine.&lt;/p&gt;&#xA;" OwnerUserId="2747" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-18T13:18:54.603" Title="A fresh install boots to the grub command prompt" Tags="|grub|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2481" PostTypeId="1" AcceptedAnswerId="2482" CreationDate="2015-10-12T09:24:43.787" Score="4" ViewCount="474" Body="&lt;p&gt;I just saw a similar question in &lt;a href=&quot;https://askubuntu.com/&quot;&gt;https://askubuntu.com/&lt;/a&gt; and got a doubt that in which programming language elementary OS terminal is written?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-13T03:52:19.347" Title="In which programming language elementary OS terminal is written?" Tags="|pantheon-terminal|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2482" PostTypeId="2" ParentId="2481" CreationDate="2015-10-12T09:26:18.463" Score="5" Body="&lt;p&gt;The terminal in elementary OS is written in &lt;a href=&quot;https://en.wikipedia.org/wiki/Vala_%28programming_language%29&quot; rel=&quot;nofollow&quot;&gt;Vala&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see information about Pantheon Terminal and even read the source code on &lt;a href=&quot;https://launchpad.net/pantheon-terminal&quot; rel=&quot;nofollow&quot;&gt;its Launchpad page.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2015-10-12T23:58:04.807" LastActivityDate="2015-10-12T23:58:04.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2483" PostTypeId="1" AcceptedAnswerId="2496" CreationDate="2015-10-12T10:18:25.923" Score="3" ViewCount="8920" Body="&lt;p&gt;I simply can't create a persistent USB thumb of elementary OS (last version download from the site) using usb-creator from the repos. Is there something wrong with that package? Or it simply does not work with elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the working alternative?&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="2708" LastEditDate="2015-10-12T17:21:42.317" LastActivityDate="2016-10-05T12:17:04.033" Title="How to create a persistent USB with elementary OS?" Tags="|usb-drive|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2484" PostTypeId="2" ParentId="2483" CreationDate="2015-10-12T11:49:51.353" Score="1" Body="&lt;p&gt;You can install Unetbootin from the official repositories.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install unetbootin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or you could try the command &lt;code&gt;dd&lt;/code&gt; which is installed by default (but should be used with extreme coution!)&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-12T11:49:51.353" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2485" PostTypeId="2" ParentId="2480" CreationDate="2015-10-12T11:53:02.677" Score="2" Body="&lt;p&gt;Boot using your live CD. Then you need to run these commands in a Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Boot repair will now open. Click on &quot;advanced options&quot; and search for the option that mentions &quot;purge grub&quot;. Than click &quot;recommended repair&quot; and follow the on screen messages. When that's done you can reboot and if everything went right it will work now.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2926" LastEditDate="2015-11-22T13:49:05.773" LastActivityDate="2015-11-22T13:49:05.773" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2486" PostTypeId="1" CreationDate="2015-10-12T13:07:57.900" Score="6" ViewCount="610" Body="&lt;p&gt;How can I compile Midori (with granite) to use WebKit2 instead of WebKit?&lt;/p&gt;&#xA;" OwnerDisplayName="user479" LastEditorUserId="45" LastEditDate="2015-11-17T18:23:55.670" LastActivityDate="2015-11-17T18:23:55.670" Title="How can I compile Midori with WebKit2?" Tags="|midori|development|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2487" PostTypeId="2" ParentId="2012" CreationDate="2015-10-12T15:00:55.240" Score="3" Body="&lt;p&gt;Since you have already used &lt;code&gt;sensors&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check &lt;strong&gt;CPU temperature&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Option 1&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;apci&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install acpi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to find temperature :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;acpi -t&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example Output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ acpi -t&#xA;Thermal 0: ok, 29.8 degrees C&#xA;Thermal 1: ok, 27.8 degrees C&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you use &lt;code&gt;acpi -V&lt;/code&gt; you will get more information.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Option 2&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;strong&gt;psensors&lt;/strong&gt; a temperature app indicator&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install psensor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-12T16:07:14.860" LastActivityDate="2015-10-12T16:07:14.860" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2489" PostTypeId="1" CreationDate="2015-10-12T18:18:37.993" Score="1" ViewCount="487" Body="&lt;p&gt;I installed hplip, and then attempted to set up my printer using a variety of methods including the built-in printer app, the HP device manager, the system-config-printer command, and the CUPS web interface.  None of these have been successful, as, without fail, the computer will send a page to be printed, the printer will say it is printing, and then it does not print anything.  The printer will say the job is completed, the computer says the same, and yet there will be no noise coming from the printer, and no page will come out.&lt;/p&gt;&#xA;" OwnerUserId="2751" LastEditorUserId="34" LastEditDate="2015-11-27T13:15:51.827" LastActivityDate="2015-11-29T01:20:33.787" Title="Can't print to HP Officejet 5740 using elementary OS Freya" Tags="|release-freya|printer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2490" PostTypeId="2" ParentId="2489" CreationDate="2015-10-12T19:04:35.737" Score="1" Body="&lt;p&gt;According to the &lt;a href=&quot;http://hplipopensource.com/hplip-web/models/officejet/officejet_5740_series.html&quot; rel=&quot;nofollow&quot;&gt;official HPLIP-Database&lt;/a&gt; your printer needs HPLIP version 3.14.10 or newer.&lt;br&gt;&#xA;Unfortunately elementary OS supplies HPLIP 3.14.3 by default, which does not support your printer.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to install &lt;a href=&quot;http://hplipopensource.com/hplip-web/install_wizard/index.html&quot; rel=&quot;nofollow&quot;&gt;a newer version of HPLIP&lt;/a&gt; (choose Ubuntu 14.04 as distribution).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please create a backup of your system before installing a third-party Application, just in case something goes wrong.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-10-12T19:04:35.737" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2491" PostTypeId="1" CreationDate="2015-10-12T21:29:31.920" Score="1" ViewCount="92" Body="&lt;p&gt;I installed Elementary on my laptop. When I boot the computer, I just get a GRUB screen. What am I supposed to do? This isn't part of the tutorial I was following...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pic: &lt;a href=&quot;https://i.stack.imgur.com/WoEtS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/WoEtS.jpg&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;BIOS shows the Windows Boot Manager and the GRUB screen. Installed Elementary with UEFI.&#xA;Very confused..&lt;/p&gt;&#xA;" OwnerUserId="2754" LastEditorUserId="160" LastEditDate="2015-10-16T14:06:47.067" LastActivityDate="2015-10-16T14:06:47.067" Title="Tried to Dualboot W10/Elementary. Greeted by a Grub command screen. What do I do?" Tags="|dual-boot|grub|" AnswerCount="2" CommentCount="0" ClosedDate="2015-10-16T21:27:22.500" ContentLicense="CC BY-SA 3.0" />
  <row Id="2492" PostTypeId="1" CreationDate="2015-10-12T22:14:53.267" Score="1" ViewCount="152" Body="&lt;p&gt;You can see in the picture that my QY7 headsets were recognized&#xA; as a keyboard and the sound menu doesn't show any other sound output&lt;a href=&quot;https://i.stack.imgur.com/PxYX9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PxYX9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2755" LastEditorUserId="3757" LastEditDate="2016-04-23T11:53:44.493" LastActivityDate="2016-04-23T11:53:44.493" Title="connected my QY7 headsets to elementary OS freya" Tags="|bluetooth|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2493" PostTypeId="2" ParentId="2491" CreationDate="2015-10-12T23:04:35.910" Score="1" Body="&lt;p&gt;I can't comment to say this is probably a duplicate, but you should be able to find the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1884/2654&quot;&gt;answer here&lt;/a&gt;.&#xA;If that doesn't work, &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2422/2654&quot;&gt;go here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="2654" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-12T23:04:35.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2495" PostTypeId="2" ParentId="1311" CreationDate="2015-10-13T05:46:47.730" Score="1" Body="&lt;p&gt;The simple way to adjust brightness from terminal is using &lt;code&gt;xrandr&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr&lt;/code&gt;  is used to set the size, orientation and/or reflection of the outputs for a screen. It can also set the screen size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information about &lt;code&gt;xrandr&lt;/code&gt; open terminal and run &lt;code&gt;man xrandr&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you need to find your display name,for that run the command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q | grep &quot; connected&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For Example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ xrandr -q | grep &quot; connected&quot;&#xA;VGA1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 410mm x 230mm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here,In my system &lt;strong&gt;VGA1&lt;/strong&gt; is display name.&#xA;   &lt;strong&gt;Replace&lt;/strong&gt; VGA1 with your system display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; xrandr --output VGA1 --brightness 0.7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here range from &lt;strong&gt;0.0 to 1.0&lt;/strong&gt; .&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 2&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To adjust screen brightness you can use &lt;code&gt;xbacklight&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Usage:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;usage: xbacklight [options]&#xA;where options are:&#xA;       -display &amp;lt;display&amp;gt; or -d &amp;lt;display&amp;gt;&#xA;       -help&#xA;       -set &amp;lt;percentage&amp;gt; or = &amp;lt;percentage&amp;gt;&#xA;       -inc &amp;lt;percentage&amp;gt; or + &amp;lt;percentage&amp;gt;&#xA;       -dec &amp;lt;percentage&amp;gt; or - &amp;lt;percentage&amp;gt;&#xA;       -get&#xA;       -time &amp;lt;fade time in milliseconds&amp;gt;&#xA;       -steps &amp;lt;number of steps in fade&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example: &lt;code&gt;xbacklight -inc 20&lt;/code&gt; will increase by 20 percent.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-13T07:15:20.267" LastActivityDate="2015-10-13T07:15:20.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2496" PostTypeId="2" ParentId="2483" CreationDate="2015-10-13T07:02:10.703" Score="1" Body="&lt;p&gt;It seems that usb-creator and unetbootin from Ubuntu 14.04 repos does not play well with UEFI. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to mount the drive after the process is complete, edit the boot.cfg file under /boot and add &lt;code&gt;persistent&lt;/code&gt; to the relevant boot entry at the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux   /casper/vmlinuz  persistent file=/cdrom/preseed/ubuntu.seed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="132" LastEditorUserId="132" LastEditDate="2015-10-29T22:50:47.420" LastActivityDate="2015-10-29T22:50:47.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2497" PostTypeId="2" ParentId="2380" CreationDate="2015-10-13T07:05:17.790" Score="2" Body="&lt;p&gt;This question seems really simular:&#xA;&lt;a href=&quot;https://superuser.com/questions/408683/why-my-usb-mouse-gets-suspended-after-3-seconds-of-inactivity&quot;&gt;https://superuser.com/questions/408683/why-my-usb-mouse-gets-suspended-after-3-seconds-of-inactivity&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can check if you have the same issue as the one above by entering the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;for i in /sys/bus/usb/devices/*/power/control; do echo on &amp;gt; $i; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this fixes your problem, you can make it permanent by editing &lt;code&gt;/etc/laptop-mode/conf.d/usb-autosuspend.conf&lt;/code&gt; in scratch&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/laptop-mode/conf.d/usb-autosuspend.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and replacing &lt;code&gt;CONTROL_USB_AUTOSUSPEND=&quot;auto&quot;&lt;/code&gt; by &lt;code&gt;CONTROL_USB_AUTOSUSPEND=0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Edit]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The permanent fix seems to have changed, if &lt;code&gt;modprobe usbcore autosuspend=-1&lt;/code&gt; doesn't do anything, you need to change the bootloader.&#xA;To do this, you have to open the GRUB config in scratch.&#xA;&lt;code&gt;sudo scratch-text-editor /etc/default/grub&lt;/code&gt; and loof for a line that states &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; and add &lt;code&gt;usbcore.autosuspend=-1&lt;/code&gt; to that line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The line will be something along the lines of this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash usbcore.autosuspend=-1&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2015-10-14T17:10:51.550" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="2500" PostTypeId="1" CreationDate="2015-10-13T09:30:08.193" Score="1" ViewCount="123" Body="&lt;p&gt;For a few months now I've been having this issue where sometimes content from websites are blocked. A few examples are scripts being blocked so I'm unable to log in to certain websites, on Android Studio I have to use an insecure method to download resources (or a system proxy) or it fails, some applications that require a token from online will load up my browser get the token then try to load a local page (127.0.0.1:blah) and give the message &quot;connection refused&quot;, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tested using different browsers, it is not a problem with a specific one, I've tried Firefox, Chrome, Chromium, Midori, and Opera. It's not an ad blocking extension as I've tried all of those browsers out of the box. It is not a problem with a firewall, I have the firewall disabled in the settings. It is not a proxy problem, I am not using a proxy, it is disabled in settings, however if I use Google's data reduction proxy on chrome it solves the issue with non-local content being blocked. It is not an issue with the router as I have no setting specific to my PC and this issue is not present on my other devices, which means it's a software problem on my elementary OS PC. I've also made sure it's not somehow a hardware issue by installing Ubuntu 15.04 and making sure the issue is not present there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running Freya and I have installed quite a few programs and 3rd party PPA's, I've installed nothing specifically having to do with Firewalls, Proxies, etc. Nor have I added any PPA containing such besides possibly a broad PPA such as getdeb. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched for hours on omgubuntu, linux stackexchange, etc. and have found nothing as this is a very specific issue that I cannot find the solution to. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also asked this question already on this stackexchange but it was deleted and I was warned that I am now in danger of being blocked. However it is a good question by the standards posted. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have done hours of research and have not found a case similar to mine.&#xA;It is on topic as it is a question regarding elementary OS that is a problem I only am experiencing on elementary OS. &#xA;It is 3 paragraphs which is pretty specific. &#xA;I tried to make it as relevant to others as possible but it's a very rare issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any input is appreciated and hopefully posting here will help me finally solve this issue that has been plaguing me for months. If you know of a better place for me to ask this question please refer me there. &lt;/p&gt;&#xA;" OwnerUserId="110" LastActivityDate="2015-10-13T10:46:27.917" Title="Certain web content being blocked" Tags="|google-chrome|networking|midori|firefox|chromium|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2502" PostTypeId="2" ParentId="2500" CreationDate="2015-10-13T10:14:56.927" Score="1" Body="&lt;p&gt;It might have to do something with your hostfile as all browsers have this issue. You can open your hostfile by opening &lt;code&gt;/etc/hosts&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/hosts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should contain something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;127.0.0.1   localhost&#xA;127.0.1.1   &amp;lt;your pc name&amp;gt;&#xA;&#xA;# The following lines are desirable for IPv6 capable hosts&#xA;::1     localhost ip6-localhost ip6-loopback&#xA;ff02::1 ip6-allnodes&#xA;ff02::2 ip6-allrouters&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-13T10:14:56.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2503" PostTypeId="2" ParentId="2500" CreationDate="2015-10-13T10:46:27.917" Score="2" Body="&lt;p&gt;After trying other search engines and learning their syntax I was able to come across someone who had a similar issue on Ubuntu 12.04 and was able to fix it using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --reconfigure --all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which had me alter a few things like apache and ssl certs. After a reboot I don't seem to be having the issue anymore. I feel bad that I found the answer so soon after I had posted this question but I'm glad my last attempt to fix it was fruitful. &lt;/p&gt;&#xA;" OwnerUserId="110" LastActivityDate="2015-10-13T10:46:27.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2504" PostTypeId="1" CreationDate="2015-10-13T13:14:00.620" Score="6" ViewCount="2918" Body="&lt;p&gt;I'm unable to play music in the default music player. Every time I need to import files it shows a red dash as shown in screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/f8aaH.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already have &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt; installed.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-18T09:10:57.500" LastActivityDate="2016-09-11T13:13:54.177" Title="Unable to play music in elementary OS default music player" Tags="|music|" AnswerCount="4" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2505" PostTypeId="5" CreationDate="2015-10-13T13:18:29.817" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-10-13T13:18:29.817" LastActivityDate="2015-10-13T13:18:29.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2506" PostTypeId="4" CreationDate="2015-10-13T13:18:29.817" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-10-13T13:18:29.817" LastActivityDate="2015-10-13T13:18:29.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2507" PostTypeId="1" CreationDate="2015-10-13T13:31:32.527" Score="3" ViewCount="222" Body="&lt;p&gt;a few months ago I installed some stuff in my elementary OS. I don't remember exactly what I did (I have tried to reverse the things), but it fumbled Steam. Now the Steam is too slow (I think that is something related with graphic parameters). Some one could help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ASUS S46C&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;descrição: VGA compatible controller&#xA;   produto: 3rd Gen Core processor Graphics Controller&#xA;   fabricante: Intel Corporation&#xA;   ID físico: 2&#xA;   informações do barramento: pci@0000:00:02.0&#xA;   versão: 09&#xA;   largura: 64 bits&#xA;   clock: 33MHz&#xA;   capacidades: msi pm vga_controller bus_master cap_list rom&#xA;   configuração: driver=i915 latency=0&#xA;   recursos: irq:46 memória:f7800000-f7bfffff memória:e0000000-efffffff porta de E/S:f000(tamanho=64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;glxinfo | grep render&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;direct rendering: Yes&#xA;&#xA;GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, &#xA;&#xA;OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 256 bits)&#xA;&#xA;GL_MESA_ycbcr_texture, GL_NV_blend_square, GL_NV_conditional_render, &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="963" LastEditorUserId="138" LastEditDate="2015-10-13T16:46:24.437" LastActivityDate="2015-10-13T16:46:24.437" Title="Games in steam too slow" Tags="|graphic-drivers|steam|" AnswerCount="0" CommentCount="3" ClosedDate="2019-10-22T03:10:52.643" ContentLicense="CC BY-SA 3.0" />
  <row Id="2508" PostTypeId="1" CreationDate="2015-10-13T17:44:53.937" Score="2" ViewCount="5315" Body="&lt;p&gt;I installed Tweaks from &lt;a href=&quot;https://github.com/I-hate-farms/elementary-tweaks&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, by method described in the README.md.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL  http://i-hate-farms.github.io/spores/install | sudo bash - &#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I want to delete it, but I can not do it correctly.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;maxim@ProBook:~$ sudo apt-get remove elementary-tweaks&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages will be REMOVED:&#xA;  elementary-tweaks&#xA;0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.&#xA;After this operation, 1,263 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] Y&#xA;(Reading database ... 159565 files and directories currently installed.)&#xA;Removing elementary-tweaks (1.0.1) ...&#xA;Processing triggers for libglib2.0-0:amd64 (2.42.2-0ubuntu1~14.04~ricotz0) ...&#xA;sh: 1: /usr/lib/x86_64-linux-gnu/switchboard/personal/tweaks/theme-patcher: not found&#xA;E: Problem executing scripts DPkg::Post-Invoke '/usr/lib/x86_64-linux-gnu/switchboard/personal/tweaks/theme-patcher'&#xA;E: Sub-process returned an error code&#xA;maxim@ProBook:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now at work with other packages this error haunts me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sh: 1: /usr/lib/x86_64-linux-gnu/switchboard/personal/tweaks/theme-patcher: not found&#xA;E: Problem executing scripts DPkg::Post-Invoke '/usr/lib/x86_64-linux-gnu/switchboard/personal/tweaks/theme-patcher'&#xA;E: Sub-process returned an error code&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-10-16T19:12:49.210" Title="How can I remove elementary-tweaks?" Tags="|release-freya|package-management|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2509" PostTypeId="1" CreationDate="2015-10-13T18:07:26.433" Score="1" ViewCount="4613" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Nrom5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Nrom5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using latest elementary OS. I have some updates in my laptop but when i hit update button it says &lt;strong&gt;Requires installation of untrusted packages&lt;/strong&gt;. How can I solve? &lt;/p&gt;&#xA;" OwnerUserId="2761" LastEditorUserId="3757" LastEditDate="2016-05-04T07:55:03.790" LastActivityDate="2016-05-04T07:55:03.790" Title="Requires installation of untrusted packages in elementary OS" Tags="|release-freya|updates|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2510" PostTypeId="1" CreationDate="2015-10-13T18:46:33.500" Score="5" ViewCount="3441" Body="&lt;p&gt;Using Elementary OS 0.3.1 Freya 64-bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use an app called Isoplex.  It's run directly from an executable which I have stored in the Downloads directory.  Runs just fine by double clicking on the file from Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I pin this to Plank?  The icon appears while running Isoplex, but right-clicking doesn't let me pin Isoplex to Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to do this?  Alternately, can I add Isoplex to my Applications list in the upper-left corner? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="458" LastEditorUserId="160" LastEditDate="2015-10-15T16:59:00.300" LastActivityDate="2017-11-19T13:58:41.683" Title="Adding an executable to Plank" Tags="|plank|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2511" PostTypeId="2" ParentId="2508" CreationDate="2015-10-13T18:51:39.430" Score="2" Body="&lt;p&gt;Reinstalling &lt;code&gt;libglib2.0-0&lt;/code&gt; will fix this error in my case.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libglib2.0-0 libglib2.0-bin libglib2.0-data&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-13T18:51:39.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2513" PostTypeId="2" ParentId="2510" CreationDate="2015-10-13T19:11:10.077" Score="8" Body="&lt;p&gt;Create &lt;code&gt;.desktop&lt;/code&gt; extension file in &lt;code&gt;~/.local/share/applications&lt;/code&gt;. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/applications/isoplex.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And write this in there:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Terminal=false&#xA;Exec=command to run here&#xA;Name=visible name here&#xA;Comment=comment here&#xA;Icon=icon path here&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You must manually find and assign it the path to the executable file, and the icon. Don't forget to make the file executable (&lt;code&gt;chmod +x ~/.local/share/applications/isoplex.desktop&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can drag&amp;amp;drop the desktop file onto Plank or launch it from Slingshot and then 'Keep in dock'.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorDisplayName="user170" LastEditDate="2017-02-23T12:38:57.583" LastActivityDate="2017-02-23T12:38:57.583" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2514" PostTypeId="1" CreationDate="2015-10-13T19:27:15.363" Score="1" ViewCount="90" Body="&lt;p&gt;After installing NVIDIA drivers mouse cursor is changing it's size depends on object under cursor. And it is huge (looks like about 3 times bigger than normal).&lt;/p&gt;&#xA;" OwnerUserId="7816" LastEditorUserId="3757" LastEditDate="2016-04-23T11:51:55.490" LastActivityDate="2016-04-23T11:51:55.490" Title="How to fix huge mouser cursor after installing NVIDIA drivers?" Tags="|release-freya|mouse|" AnswerCount="0" CommentCount="0" ClosedDate="2019-12-08T04:22:06.153" ContentLicense="CC BY-SA 3.0" />
  <row Id="2515" PostTypeId="1" CreationDate="2015-10-13T19:42:45.213" Score="5" ViewCount="1625" Body="&lt;p&gt;Looking for an e-reader app that integrates well with the elementary gtk+ theme, as other native apps do. Preferably with a nightmode feature also, and support for common formats. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2567" LastActivityDate="2017-03-01T08:43:32.020" Title="Is there an epub reader that integrates well with elementary OS?" Tags="|release-freya|applications|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2516" PostTypeId="2" ParentId="2474" CreationDate="2015-10-13T20:17:26.587" Score="5" Body="&lt;p&gt;I solved this problem by uninstalling the Parental Control plugin in System Settings: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove switchboard-plug-parental-controls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Not sure why.&lt;/p&gt;&#xA;" OwnerUserId="2743" LastEditorUserId="68" LastEditDate="2016-01-20T01:56:28.903" LastActivityDate="2016-01-20T01:56:28.903" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2517" PostTypeId="1" AcceptedAnswerId="2564" CreationDate="2015-10-13T20:53:53.167" Score="6" ViewCount="5049" Body="&lt;p&gt;I'm trying to install Freya alongside Windows 10 on my new PC. It's an Alienware X51 R3 (i7-6700K, GTX 960). I've been using and installing elementary OS in different machines for a couple of years, and now I'm having some trouble to initiate the image written onto an USB. As soon as the USB boots and I choose &quot;Install Elementary OS Freya&quot;, this message appears:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[0.742776] ACPI PCC probe failed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried different USB keys and I've also seen many people having similar problems. Is anyone there who can shed some light on this?&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2708" LastEditDate="2015-11-30T12:27:24.523" LastActivityDate="2015-11-30T12:27:24.523" Title="ACPI PCC probe failed while trying to install Freya" Tags="|kernel|acpi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2519" PostTypeId="1" AcceptedAnswerId="2590" CreationDate="2015-10-13T21:25:21.950" Score="3" ViewCount="1601" Body="&lt;p&gt;For about a month now, I have been unable to use any USB devices of any kind. When I plug in one of my flash drives, which has an LED indicator, the indicator does not light up, meaning that there is not even power going through. Any advice on fixing this would be greatly appreciated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is some information that may be relevant:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gabriel@Thoth:/var/log$ sudo lsusb&#xA;Bus 001 Device 002: ID 8087:8000 Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&#xA;gabriel@Thoth:/var/log$ cat dmesg |grep -i usb&#xA;[    0.250072] ACPI: bus type USB registered&#xA;[    0.250095] usbcore: registered new interface driver usbfs&#xA;[    0.250105] usbcore: registered new interface driver hub&#xA;[    0.250130] usbcore: registered new device driver usb&#xA;[    1.141150] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver&#xA;[    1.141378] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1&#xA;[    1.155667] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00&#xA;[    1.155738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002&#xA;[    1.155743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1&#xA;[    1.155746] usb usb1: Product: EHCI Host Controller&#xA;[    1.155750] usb usb1: Manufacturer: Linux 3.13.0-65-generic ehci_hcd&#xA;[    1.155754] usb usb1: SerialNumber: 0000:00:1d.0&#xA;[    1.155959] hub 1-0:1.0: USB hub found&#xA;[    1.156184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver&#xA;[    1.156209] uhci_hcd: USB Universal Host Controller Interface driver&#xA;[    1.156428] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2&#xA;[    1.156799] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002&#xA;[    1.156803] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1&#xA;[    1.156807] usb usb2: Product: xHCI Host Controller&#xA;[    1.156811] usb usb2: Manufacturer: Linux 3.13.0-65-generic xhci_hcd&#xA;[    1.156814] usb usb2: SerialNumber: 0000:00:14.0&#xA;[    1.157006] hub 2-0:1.0: USB hub found&#xA;[    1.161050] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3&#xA;[    1.161118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003&#xA;[    1.161122] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1&#xA;[    1.161126] usb usb3: Product: xHCI Host Controller&#xA;[    1.161129] usb usb3: Manufacturer: Linux 3.13.0-65-generic xhci_hcd&#xA;[    1.161132] usb usb3: SerialNumber: 0000:00:14.0&#xA;[    1.161334] hub 3-0:1.0: USB hub found&#xA;[    1.479541] usb 1-1: new high-speed USB device number 2 using ehci-pci&#xA;[    1.611935] usb 1-1: New USB device found, idVendor=8087, idProduct=8000&#xA;[    1.611940] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0&#xA;[    1.612192] hub 1-1:1.0: USB hub found&#xA;[    1.779462] usb 2-1: new high-speed USB device number 2 using xhci_hcd&#xA;[    1.832248] usb 2-1: New USB device found, idVendor=5986, idProduct=0535&#xA;[    1.832250] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2&#xA;[    1.832252] usb 2-1: Product: Lenovo EasyCamera&#xA;[    1.832254] usb 2-1: Manufacturer: Generic&#xA;[    1.832255] usb 2-1: SerialNumber: 200901010001&#xA;[    2.003347] usb 2-5: new full-speed USB device number 3 using xhci_hcd&#xA;[    2.020509] usb 2-5: New USB device found, idVendor=0cf3, idProduct=3004&#xA;[    2.020512] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0&#xA;[    2.187302] usb 2-6: new full-speed USB device number 4 using xhci_hcd&#xA;[    7.206345] usb 2-6: New USB device found, idVendor=048d, idProduct=8386&#xA;[    7.206351] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0&#xA;[    7.206354] usb 2-6: Product: ITE Device(8386)&#xA;[    7.206356] usb 2-6: Manufacturer: ITE Tech. Inc.&#xA;[    7.373403] usb 2-7: new full-speed USB device number 5 using xhci_hcd&#xA;[    7.398516] usb 2-7: New USB device found, idVendor=03eb, idProduct=8c1d&#xA;[    7.398520] usb 2-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0&#xA;[    7.398523] usb 2-7: Product: Atmel maXTouch Digitizer&#xA;[    7.398526] usb 2-7: Manufacturer: Atmel&#xA;[   11.716017] usbcore: registered new interface driver btusb&#xA;[   11.934039] usbcore: registered new interface driver usbhid&#xA;[   11.934045] usbhid: USB HID core driver&#xA;[   12.075722] usb 2-5: USB disconnect, device number 3&#xA;[   12.076636] usbcore: registered new interface driver ath3k&#xA;[   12.320124] hid-generic 0003:03EB:8C1D.0003: hiddev0,hidraw0: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input1&#xA;[   12.336752] input: Atmel Atmel maXTouch Digitizer as /devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input7&#xA;[   12.336999] hid-multitouch 0003:03EB:8C1D.0002: input,hidraw1: USB HID v1.11 Device [Atmel Atmel maXTouch Digitizer] on usb-0000:00:14.0-7/input0&#xA;[   12.353144] usb 2-5: new full-speed USB device number 6 using xhci_hcd&#xA;[   12.509464] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input11&#xA;[   12.509872] usbcore: registered new interface driver uvcvideo&#xA;[   12.509877] USB Video Class driver (1.1.1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2524" LastEditorUserId="2524" LastEditDate="2015-10-14T18:54:47.450" LastActivityDate="2024-01-18T21:37:19.947" Title="USB Ports Not Working" Tags="|usb-drive|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2520" PostTypeId="2" ParentId="2515" CreationDate="2015-10-13T21:44:42.423" Score="2" Body="&lt;p&gt;Installed &lt;strong&gt;Calibre&lt;/strong&gt; reader few days ago &lt;a href=&quot;http://calibre-ebook.com/&quot; rel=&quot;nofollow&quot;&gt;http://calibre-ebook.com/&lt;/a&gt;. Not bad. It's possible to customize it. For example, I use this theme &lt;a href=&quot;http://gnome-look.org/content/show.php?content=168291&quot; rel=&quot;nofollow&quot;&gt;http://gnome-look.org/content/show.php?content=168291&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2633" LastActivityDate="2015-10-13T21:44:42.423" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2521" PostTypeId="2" ParentId="2509" CreationDate="2015-10-14T02:06:20.353" Score="6" Body="&lt;p&gt;&lt;strong&gt;Option 1&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve this install &lt;code&gt;y-ppa-manager&lt;/code&gt;.To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/y-ppa-manager&#xA;sudo apt-get update&#xA;sudo apt-get install y-ppa-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;y-ppa-manager&lt;/code&gt; from terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When main y-ppa-manager window openend,click on &lt;kbd&gt;Advanced&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the advaced list--&gt; click on &lt;strong&gt;Try to import all missing GPG keys&lt;/strong&gt; then click OK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 2&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;em&gt;Software and Updates&lt;/em&gt;, change &lt;code&gt;download from&lt;/code&gt; to  : &lt;strong&gt;Main Server&lt;/strong&gt; ,then try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 3&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;cd /var/lib/apt&#xA;sudo mv lists lists.old&#xA;sudo mkdir -p lists/partial&#xA;sudo apt-get clean&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt; Reference &lt;a href=&quot;https://askubuntu.com/questions/13065/how-do-i-fix-the-gpg-error-no-pubkey&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://askubuntu.com/questions/85641/how-do-i-deal-with-unauthenticated-sources-errors-in-the-software-center&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-14T02:06:20.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2522" PostTypeId="1" CreationDate="2015-10-14T06:49:06.263" Score="3" ViewCount="258" Body="&lt;p&gt;Just had a problem after rebooting my computer this morning; after the successful login I saw the wallpaper appearing, then wingpanel appeared and 5 seconds later it froze; plank did not appear and all I could do was to move the mouse cursor. After waiting a few minutes, nothing changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I switched to a VT (&lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;) and launched &lt;code&gt;htop&lt;/code&gt; - no process was unusually high on the CPU; looked in the logs - no error message. I killed the gala process tree and was promptly brought to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After logging in this time, the desktop appeared normally (wingpanel and plank started almost instantaneously) and I was immediately prompted with the login screen from maya, complaining about the certificate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can this be a flaw in the desktop launching logic? If yes, how can it be corrected?&lt;/p&gt;&#xA;" OwnerUserId="888" LastEditorUserId="2708" LastEditDate="2015-10-14T08:40:04.810" LastActivityDate="2015-12-13T19:01:43.360" Title="Unresponsive desktop after login because of maya" Tags="|greeter|desktop|gala|calendar|processes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2523" PostTypeId="2" ParentId="2193" CreationDate="2015-10-14T09:17:44.457" Score="-1" Body="&lt;p&gt;You can try finding it by using these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;whereis indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-14T09:17:44.457" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2524" PostTypeId="1" CreationDate="2015-10-14T09:31:08.320" Score="5" ViewCount="1385" Body="&lt;p&gt;I just installed elementary OS on a iMac (27-inch, Mid 2011), with AMD Radeon HD 6770M. It generally works well, except one thing:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;When I lock the screen &lt;kbd&gt;super&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt;, or leave the &#xA;screen and then come back and the screen is off and locked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I unlock everything is unresponsive, or at least very slow.&lt;br&gt;&#xA;When I press a button it takes several seconds before I react.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes I can just go standby, and back and everything is back to normal. Sometimes I have to reboot to solve the problem.&lt;/p&gt;&#xA;" OwnerUserId="2772" LastEditorUserId="3757" LastEditDate="2016-04-20T07:18:26.293" LastActivityDate="2016-10-29T10:14:46.000" Title="elementary OS &quot;freezes&quot; on screen lock" Tags="|release-freya|greeter|performance|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2525" PostTypeId="2" ParentId="2515" CreationDate="2015-10-14T10:28:25.230" Score="1" Body="&lt;p&gt;Unfortunately, no.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I only found one project that looks promising: &lt;a href=&quot;https://wiki.gnome.org/Outreach/SummerOfCode/2014/Projects/MartaMilakovic_GnomeBooks&quot; rel=&quot;nofollow&quot;&gt;gnome-books&lt;/a&gt;. Unfortunately, I could not get it working properly on Freya last time I tried.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the rest of the &lt;code&gt;.epub&lt;/code&gt; readers currently available on Linux look dreadful, I usually use Calibre to convert my books to &lt;code&gt;.pdf&lt;/code&gt; and use Evince (Document Viewer) to read them. &lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-14T10:28:25.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2526" PostTypeId="2" ParentId="2491" CreationDate="2015-10-14T10:42:20.567" Score="1" Body="&lt;p&gt;Boot using your live CD. Then you need to run these 3 commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Boot repair will now open. Click on &quot;advanced options&quot; and search for the option that mentions &quot;purge grub&quot;. Than click &quot;recommended repair&quot; and follow the on screen messages. When that's done you can reboot and if everything went right it will work now.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-14T10:42:20.567" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2527" PostTypeId="1" CreationDate="2015-10-14T10:50:30.320" Score="3" ViewCount="1084" Body="&lt;p&gt;I'm having an issue with chrome and chromium on my Freya, and not a little one : It frequently crash the whole system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dont really now why and how to get details about that, so I'll try to be as specific as I can :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This happen on both Google Chrome and Chromium&lt;/li&gt;&#xA;&lt;li&gt;The system and the two softs versions are 64-bit&lt;/li&gt;&#xA;&lt;li&gt;When it crash the whole system freeze. I can switch to a terminal with &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; but when I switch back, the system is still freezing (so I guess it's an X interface issue ?)&lt;/li&gt;&#xA;&lt;li&gt;When it crash audio (music or video audio) is still running but nothing left respond&lt;/li&gt;&#xA;&lt;li&gt;It's not always the case, but often a select box is black when selecting an option, and a crash happen right after&lt;/li&gt;&#xA;&lt;li&gt;Sometime I have some peace for a long time, sometime it crash several time a day&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I did my homework and search what could be the cause, and I read that the graphic acceleration can be the cause. I tried to disabled it but no change. I have this issue since the begining, with Luna back then.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="2773" LastEditorUserId="3757" LastEditDate="2016-04-26T02:47:34.647" LastActivityDate="2016-04-26T02:47:34.647" Title="Chrome / Chromium issue on elementary OS freya" Tags="|google-chrome|chromium|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2530" PostTypeId="2" ParentId="18" CreationDate="2015-10-14T13:52:13.047" Score="3" Body="&lt;p&gt;After upgrading to version 46.0.2490.71 and above you may experience this problem again. This problem occurs because &lt;code&gt;WM_CLASS&lt;/code&gt; has been changed on &lt;code&gt;google-chrome&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Based on waldyrious's answer, fix it easiest way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cp /usr/share/applications/google-chrome.desktop ~/.local/share/applications &amp;amp;&amp;amp; sed --in-place --regexp-extended 's/^(\[[A-Za-z ]+\])$/\1\nStartupWMClass=google-chrome/g' ~/.local/share/applications/google-chrome.desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-14T13:52:13.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2531" PostTypeId="1" AcceptedAnswerId="2535" CreationDate="2015-10-14T16:58:04.150" Score="3" ViewCount="787" Body="&lt;p&gt;on boot I get a message that is really annoying saying that my drive used for swap space is not ready yet or something around those lines. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I disable and remove my swap space? I have 12gb of RAM so I think there should not be an issue with not having swap space.&lt;/p&gt;&#xA;" OwnerUserId="870" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:36.097" LastActivityDate="2018-05-15T12:30:36.097" Title="How can I remove and disable swap space?" Tags="|release-freya|boot|system|swap|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2532" PostTypeId="2" ParentId="2527" CreationDate="2015-10-14T17:23:22.310" Score="1" Body="&lt;p&gt;It is sounding like a graphics issue.  It is a bit tough to tell based on the description.  I know that I have had freezing issues with the hardware enablement stack.  I chose to remove the hardware enablement stack and use updated graphics drivers.  That seems to have solved my issue.  I'm not sure if your issue is the same.  This is how I went about doing it, I'm not sure if I am just lucky that this worked so: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please make sure you back up your entire system before doing this so you can fully restore it in case this breaks something and leaves your system unusable&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Revert the graphics stack to the Trusty version with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This may break the touchpad/mouse drivers so install them with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Afterwards I added the oibaf ppa to update the Trusty graphics drivers as I couldn't before. I understand Oibaf is not compatible with the Hardware Enablement Stack&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ppa:oibaf/graphics-drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the oibaf website with other instructions:&#xA;&lt;a href=&quot;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively the website &lt;a href=&quot;https://askubuntu.com/questions/265999/how-to-remove-kernel-lts-enablement-stack&quot;&gt;https://askubuntu.com/questions/265999/how-to-remove-kernel-lts-enablement-stack&lt;/a&gt; has instructions that detail how to remove the hardware enablement stack for the ubuntu 12.04 you might be able to use them to figure out how to do it in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ultimately you have to decide how much this troubles you and how much you want to mess with your system to try and fix it.  &lt;strong&gt;Just make sure you do full system backups before you try any of this.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps your issues.&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-14T19:15:11.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2534" PostTypeId="2" ParentId="2522" CreationDate="2015-10-14T18:17:30.670" Score="1" Body="&lt;p&gt;I was experiencing the same unresponsive behaviour yesterday after an update. I couldn't track it down to Maya, but basicly the whole system froze a few seconds after login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, the issue was resolved today by updating the system again:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to console after the system has started up (&lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; or just &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo apt-get update&lt;/code&gt; followed by &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2464" LastActivityDate="2015-10-14T18:17:30.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2535" PostTypeId="2" ParentId="2531" CreationDate="2015-10-14T18:57:03.367" Score="3" Body="&lt;p&gt;&lt;strong&gt;Temporary&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo swapoff -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Permanent&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First we must tell the system not to attempt to mount the swap partition on boot. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Comment out (place a # before) or delete the line containing your swap partition which will be similar to this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;# swap was on /dev/sda3 during installation&#xA;UUID=3532d79f-8215-435b-b40e-36136e0e2a41 none swap sw 0 0&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can delete the swap partition with your partitioner of choice. Below is an example using GParted which can be installed via &lt;code&gt;sudo apt-get install gparted&lt;/code&gt;. Note that you will need to run the &lt;code&gt;swapoff&lt;/code&gt; command above (or select it from the GParted menu), before you can delete the partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NCO0m.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NCO0m.png&quot; alt=&quot;GParted&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-10-15T02:31:10.573" LastActivityDate="2015-10-15T02:31:10.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2536" PostTypeId="1" CreationDate="2015-10-14T20:28:06.223" Score="2" ViewCount="74" Body="&lt;p&gt;I'm running Parallels 11 with Freya and at least once every day or two my Freya VM will just freeze. The screen is non-responsive and programs I have running in the background are not responding over the network. Any ideas why this is happening? I'm desperate enough at this point that I'm trying out VMWare Fusion just to see if it behaves itself any better. But I would hate to pay for a second license.&lt;/p&gt;&#xA;" OwnerUserId="971" LastActivityDate="2024-02-04T13:04:05.473" Title="Freya freezing in Parallels 11" Tags="|virtualization|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2537" PostTypeId="1" CreationDate="2015-10-14T22:30:48.553" Score="1" ViewCount="261" Body="&lt;p&gt;I have just installed Elementary OS on my laptop, and everything including the WiFi is working. I can do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ping google.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it also works (shows correct IP). However, when I try to actually go to &lt;code&gt;google.com&lt;/code&gt; it wouldn't load (loads forever). This is same for every request, including doing things like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can access my router's page though. What would be a reason for it to be happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Acer Aspire One 32 bit)&lt;/p&gt;&#xA;" OwnerUserId="2779" LastEditorUserId="3757" LastEditDate="2016-04-23T11:51:15.990" LastActivityDate="2016-04-23T11:51:15.990" Title="Can't access internet but can ping" Tags="|release-freya|networking|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2538" PostTypeId="1" AcceptedAnswerId="2543" CreationDate="2015-10-14T22:47:01.617" Score="3" ViewCount="14096" Body="&lt;p&gt;I had recently installed LibreOffice 5 by executing these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/libreoffice-5-0&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The interface is by default in English. Can I change it to Latin American Spanish?&lt;/p&gt;&#xA;" OwnerUserId="2778" LastEditorUserId="138" LastEditDate="2015-10-15T01:37:07.237" LastActivityDate="2022-01-09T21:58:55.663" Title="How can I change the language of the LibreOffice's interface to Spanish?" Tags="|libreoffice|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2539" PostTypeId="2" ParentId="2538" CreationDate="2015-10-14T23:10:24.563" Score="1" Body="&lt;p&gt;tools -&gt; options -&gt;Language Settings -&gt; language&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can change the language to the language you want and you installed&lt;/p&gt;&#xA;" OwnerUserId="2780" LastActivityDate="2015-10-14T23:10:24.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2540" PostTypeId="2" ParentId="2140" CreationDate="2015-10-15T02:37:21.173" Score="4" Body="&lt;p&gt;After some many tries, i have make it work by doing this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Elementary OS Freya 0.3.1&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Linux 3.19.0-30-generic #34~14.04.1-Ubuntu SMP Fri Oct 2 22:09:39 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Get the source from for &lt;strong&gt;6.3.4&lt;/strong&gt; from &lt;a href=&quot;http://dev.mysql.com/downloads/file.php?id=457803&quot; rel=&quot;nofollow&quot;&gt;http://dev.mysql.com/downloads/file.php?id=457803&lt;/a&gt;. &lt;strong&gt;THIS IS VERY IMPORTANT BECAUSE WITH OTHER VERSIONS IT DOES NOT WORK.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Navigate to the directory you downloaded it to.&lt;/li&gt;&#xA;&lt;li&gt;tar xvf mysql-workbench-community-6.3.4-src.tar.gz&lt;/li&gt;&#xA;&lt;li&gt;cd mysql-workbench-community-6.3.4-src&lt;/li&gt;&#xA;&lt;li&gt;wget -O patch-glib.diff &lt;a href=&quot;http://bugs.mysql.com/file.php?id=21874&amp;amp;bug_id=74147&quot; rel=&quot;nofollow&quot;&gt;http://bugs.mysql.com/file.php?id=21874&amp;amp;bug_id=74147&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;patch -p0 &amp;lt; patch-glib.diff&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get build-dep mysql-workbench&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get install libgdal-dev&lt;/li&gt;&#xA;&lt;li&gt;cd build&lt;/li&gt;&#xA;&lt;li&gt;cmake .. -DBUILD_CONFIG=mysql_release&lt;/li&gt;&#xA;&lt;li&gt;make&lt;/li&gt;&#xA;&lt;li&gt;sudo make install&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2512" LastActivityDate="2015-10-15T02:37:21.173" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2541" PostTypeId="1" CreationDate="2015-10-15T02:41:53.633" Score="2" ViewCount="105" Body="&lt;p&gt;I accidentally uninstalled gala from another wm (i3wm) in my freya. What are the &lt;code&gt;.desktop&lt;/code&gt; and session files contents to recover the pantheon session??&lt;/p&gt;&#xA;" OwnerUserId="2776" LastEditorUserId="3757" LastEditDate="2016-04-23T11:50:47.397" LastActivityDate="2016-04-23T11:50:47.397" Title="How do I recover my pantheon session? Its not shown in the login?" Tags="|release-freya|gala|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2542" PostTypeId="1" CreationDate="2015-10-15T03:39:40.560" Score="1" ViewCount="23" Body="&lt;p&gt;Hello I have a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I install Elementary OS Freya, I see something unusual like this picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PdTnr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PdTnr.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cant close that window, It's really annoying &lt;/p&gt;&#xA;" OwnerUserId="2783" LastActivityDate="2015-10-15T03:39:40.560" Title="Desktop Windows Issue" Tags="|release-freya|desktop|" AnswerCount="0" CommentCount="7" ClosedDate="2015-10-15T05:30:48.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="2543" PostTypeId="2" ParentId="2538" CreationDate="2015-10-15T04:59:34.857" Score="2" Body="&lt;p&gt;To change user interface language in libreoffice:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure the language pack is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For this,open &quot;Language &amp;amp; region &quot; in system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on &lt;kbd&gt;comple install&lt;/kbd&gt; under &quot;install missing languages&quot; ,&lt;strong&gt;if&lt;/strong&gt; the required language is not available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: No need to change any other settings in that tab.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;2.Go to &lt;code&gt;libreoffice&lt;/code&gt; &lt;strong&gt;tools&lt;/strong&gt;--&gt;&gt; &lt;strong&gt;options..&lt;/strong&gt; --&gt;&gt; &lt;strong&gt;language settings&lt;/strong&gt; --&gt;&gt; &lt;strong&gt;language&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.Now change &lt;strong&gt;User interface, Locale setting , Default currency&lt;/strong&gt; , and &lt;strong&gt;default document language&lt;/strong&gt; to desired language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will change the language &lt;strong&gt;only&lt;/strong&gt; for LibreOffice, leaving other applications in English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/sOu2R.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-15T04:59:34.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2544" PostTypeId="1" CreationDate="2015-10-15T08:46:21.237" Score="1" ViewCount="102" Body="&lt;p&gt;After some time it occurs that i have a non-interact able area on my elementary OS Freya desktop.&#xA;The problem is demonstrated in a short video with indicating mouse clicks:&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=ZW45zqfAFGM&quot; rel=&quot;nofollow&quot;&gt;https://www.youtube.com/watch?v=ZW45zqfAFGM&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even all menus in this area with the size of an &quot;invisible notification&quot; are not interact able, so all the panel menus are useless at this point when the bug occurs. Once the bug shows up it stays until reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which logs or any other stuff shall i provide to fix this issue with your help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: already reported and stated as &quot;in progress&quot;:&lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1376382&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/gala/+bug/1376382&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2784" LastEditorUserId="2784" LastEditDate="2015-10-16T00:15:57.093" LastActivityDate="2015-10-16T00:15:57.093" Title="Invisible area (size and position of notifications) prevents interaction with any windows/menus" Tags="|mouse|notifications|click|" AnswerCount="0" CommentCount="1" ClosedDate="2015-10-21T13:37:20.563" ContentLicense="CC BY-SA 3.0" />
  <row Id="2545" PostTypeId="1" CreationDate="2015-10-15T09:40:24.963" Score="1" ViewCount="154" Body="&lt;p&gt;Today I updated my system with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After a restart wingpanel is displayed not correctly, it is missing transparency and I can drag it around. Slingshot now has a black border.&#xA;Guest session don't have this problems...&#xA;What can I do to resolve this?&lt;/p&gt;&#xA;" OwnerUserId="2785" LastEditorUserId="37" LastEditDate="2015-11-19T12:23:35.180" LastActivityDate="2015-11-19T12:23:35.180" Title="elementary OS Freya interface is broken after upgrade" Tags="|system|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2546" PostTypeId="1" AcceptedAnswerId="2552" CreationDate="2015-10-15T12:33:32.050" Score="9" ViewCount="7960" Body="&lt;p&gt;everyone. I use zotero for my studies and downloaded a tar.gz-file from their website. When I extract it, it has an executable shell script that launches the programme. I wanted to be able to start Zotero from slingshot instead of having to browse to the folder every time I want to open it. So I created my own .desktop file which is called zotero.desktop and I created it while running scratch as root and placed it in &lt;code&gt;/usr/share/applications/&lt;/code&gt;&#xA;This is the file: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Zotero&#xA;Comment=Bibliografisch programma&#xA;Exec=/home/lieven/ICT/Configuratie en Setup/Zotero_linux-x86_64/zotero&#xA;Icon=/home/lieven/ICT/Configuratie en Setup/Zotero_linux-x86_64/chrome/icons/default/default48.png&#xA;Categories=Utility&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I open slingshot and type in Zotero, it isn't listed as an entry. This is also the case after logging out and restarting the computer. What can I do to be able to open Zotero from within slingshot?&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2020-04-22T10:04:45.433" Title="How to create a custom .desktop-file" Tags="|slingshot|app-shortcuts|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2547" PostTypeId="1" CreationDate="2015-10-15T12:42:09.993" Score="1" ViewCount="114" Body="&lt;p&gt;When I still was using openSUSE, I used org-mode in emacs as my note-taking program. There is an annoying bug  in Ubuntu that makes it impossible to open Emacs without being root and I also didn't have the time to learn how to configure and theme Emacs to my liking in elementary OS so it would fit better in the overall OS, so I switched to Zim. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But  I really loved using org-mode to take notes especially with all the short cuts for navigation and reordering the document. It's something I really miss. Does anyone know a way to either properly configure and theme Emacs so it will blend in elementary OS or a way to use org-mode without Emacs or maybe an elementary styled program that has (most of) the same functionality as org-mode?&lt;/p&gt;&#xA;" OwnerUserId="151" LastEditorUserId="3757" LastEditDate="2016-04-23T11:50:25.847" LastActivityDate="2016-10-09T00:01:50.783" Title="Alternative for org-mode elementary OS-style" Tags="|applications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2548" PostTypeId="1" CreationDate="2015-10-15T13:01:36.410" Score="2" ViewCount="1010" Body="&lt;p&gt;So I was a bit skeptical about elementary OS, but after 2 weeks I am converted. I came from Slackware back in the days, onto Ubuntu and now elementary OS. Thanks to the team. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in the two weeks I have installed many other apps, but now running into some issues. I want to do a reinstall without having to go through the installation process. Is there an easy way to do a reinstall? &lt;/p&gt;&#xA;" OwnerUserId="2628" LastEditorUserId="138" LastEditDate="2015-10-15T23:11:49.643" LastActivityDate="2015-10-15T23:11:49.643" Title="Reinstallation of Freya" Tags="|system-installation|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2550" PostTypeId="1" CreationDate="2015-10-15T14:20:39.300" Score="1" ViewCount="4214" Body="&lt;p&gt;I'm planning on coding using the distro. Which packages should i install?&lt;/p&gt;&#xA;" OwnerUserId="2787" LastEditorUserId="138" LastEditDate="2015-10-15T23:14:41.647" LastActivityDate="2015-10-16T01:07:58.217" Title="Just installed elementary OS. How to get MySQl and C++ to work?" Tags="|release-freya|programming|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2551" PostTypeId="2" ParentId="2550" CreationDate="2015-10-15T15:43:03.070" Score="3" Body="&lt;p&gt;install the &lt;strong&gt;g++&lt;/strong&gt;, &lt;strong&gt;mysql-server&lt;/strong&gt; and &lt;strong&gt;mysql-client&lt;/strong&gt; packages, you can do that like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install g++ mysql-server mysql-client&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-15T15:43:03.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2552" PostTypeId="2" ParentId="2546" CreationDate="2015-10-15T16:23:58.987" Score="7" Body="&lt;p&gt;Correct content of &lt;code&gt;zotero.desktop&lt;/code&gt; as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Zotero&#xA;Comment=Bibliografisch programma&#xA;Exec=/home/lieven/ICT/Configuratie\ en\ Setup/Zotero_linux-x86_64/zotero&#xA;Icon=/home/lieven/ICT/Configuratie\ en\ Setup/Zotero_linux-x86_64/chrome/icons/default/default48.png&#xA;Categories=Utility&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Path with space should contain a backslash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also make &lt;code&gt;zotero.desktop&lt;/code&gt; executable through Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /usr/share/applications/zotero.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;PS:&lt;/strong&gt; No need to get into system files, &lt;code&gt;*.desktop&lt;/code&gt; with same success can be placed in &lt;code&gt;~/.local/share/applications&lt;/code&gt;. In this case, command to change permissions of an executable file will look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/.local/share/applications/zotero.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2015-10-15T16:29:27.833" LastActivityDate="2015-10-15T16:29:27.833" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2553" PostTypeId="2" ParentId="2548" CreationDate="2015-10-15T18:36:49.080" Score="2" Body="&lt;p&gt;I don't think there's a &quot;easy way&quot; to put the elementary OS in a &quot;clean&quot; state, with only the default packages installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, you can try use the packages managers like Synaptic or Aptitude, or even the &lt;code&gt;apt-get&lt;/code&gt;, to uninstall ALL packages and then reinstall the package &lt;code&gt;elementary-desktop&lt;/code&gt; and its dependecies. But there's no safety nets there, you may accidentally forget to reinstall important packages and turn your elementary inaccessible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest (and maybe fastest) way is backup your data and do a fresh install.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-15T18:36:49.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2554" PostTypeId="1" AcceptedAnswerId="2558" CreationDate="2015-10-15T20:55:22.630" Score="9" ViewCount="3864" Body="&lt;p&gt;I undertand Midori is the default browser but have installed Firefox and would like to make it look nice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The theme most people seem to use is unavailable for Firefox 41. Any ideas on other good themes or customizations to make Firefox more elementary-like?&lt;a href=&quot;https://i.stack.imgur.com/rLxo7.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rLxo7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2017-05-10T11:43:45.317" Title="How can I theme Firefox to suit elementary?" Tags="|firefox|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2556" PostTypeId="2" ParentId="2550" CreationDate="2015-10-16T01:07:58.217" Score="3" Body="&lt;p&gt;Ok. Let's see.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The package &lt;code&gt;build-essential&lt;/code&gt; installs the C and C++ compilers along with the &lt;code&gt;make&lt;/code&gt; tool and some headers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll need &lt;code&gt;mysql-server&lt;/code&gt; and &lt;code&gt;mysql-client&lt;/code&gt; to have a local database and access it. You can try &lt;code&gt;mariadb-server&lt;/code&gt; and &lt;code&gt;mariadb-client&lt;/code&gt; too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the MySQL C++ connector/driver, there's the &lt;code&gt;libmysqlcppconn-dev&lt;/code&gt; package. You'll need to &lt;a href=&quot;https://stackoverflow.com/questions/3450464/undefined-reference-to-get-driver-instance/11879650#11879650&quot; title=&quot;add&quot;&gt;add&lt;/a&gt; &lt;code&gt;-lmysqlcppconn&lt;/code&gt; to the linker when compiling.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So... this should do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install build-essential mysql-server mysql-client libmysqlcppconn-dev&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2015-10-16T01:07:58.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2558" PostTypeId="2" ParentId="2554" CreationDate="2015-10-16T07:45:32.373" Score="9" Body="&lt;p&gt;There currently is no theme that really fits elementary OS, but there is a GNOME theme that adds a headerbar to Firefox. You can find it at&#xA;&lt;a href=&quot;https://github.com/chpii/Headerbar&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/chpii/Headerbar&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Wxrw3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Wxrw3.png&quot; alt=&quot;GNOME Firefox&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it by downloading these extensions and themes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://addons.mozilla.org/firefox/addon/gnotifier/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Extension that makes the notifications of Firefox use elementary OS's (optional)&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/gnome-integration-team/firefox-gnome/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME theme&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Extension that hides tabs (optional)&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://addons.mozilla.org/firefox/addon/htitle/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Extension that adds headerbar&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To make the headerbar add-on work correctly, open Firefox menu and select Add-ons, then find HTitle preferences and select Hide titlebar: Always. The nice thing is that all the add-ons are modular, so you can just enable and disable add-ons until you like the way it looks. It is also &lt;a href=&quot;https://addons.mozilla.org/nl/firefox/addon/stylish/&quot; rel=&quot;nofollow noreferrer&quot;&gt;stylish&lt;/a&gt; compatible, so you could even add some custom CSS to make it match elementary OS better.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="686" LastEditDate="2017-05-10T11:43:45.317" LastActivityDate="2017-05-10T11:43:45.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2560" PostTypeId="2" ParentId="215" CreationDate="2015-10-16T11:15:16.547" Score="-3" Body="&lt;p&gt;i use PySDM, it easy way to auto mount my partitions, step to do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;a href=&quot;http://pysdm.sourceforge.net&quot; rel=&quot;nofollow&quot;&gt;http://pysdm.sourceforge.net&lt;/a&gt; download and open it with root permission;&lt;/li&gt;&#xA;&lt;li&gt;Look to left side &quot;Partition List&quot; to see your device or your partition (fat/fat32/ntfs...), enter that partition;&lt;/li&gt;&#xA;&lt;li&gt;At right side, give it a name. (you can see mount point for further access)&lt;/li&gt;&#xA;&lt;li&gt;Mount it.&lt;/li&gt;&#xA;&lt;li&gt;Good Lucks&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2796" LastEditorUserId="2796" LastEditDate="2015-10-21T04:54:29.027" LastActivityDate="2015-10-21T04:54:29.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2561" PostTypeId="1" CreationDate="2015-10-16T11:49:40.507" Score="1" ViewCount="116" Body="&lt;p&gt;is there a way to remove steam from dock but leave it minimized system tray? &#xA;Found a topic on it however he didnt explain how he did it &lt;a href=&quot;https://elementaryforums.com/index.php?threads/steam-x-button-minimizes-to-both-dock-and-the-top-panel.204/&quot; rel=&quot;nofollow&quot;&gt;https://elementaryforums.com/index.php?threads/steam-x-button-minimizes-to-both-dock-and-the-top-panel.204/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2798" LastEditorUserId="2461" LastEditDate="2015-10-24T21:25:03.010" LastActivityDate="2015-10-24T21:25:03.010" Title="Is it possible to remove Steam from Plank while running?" Tags="|plank|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2562" PostTypeId="1" CreationDate="2015-10-16T11:52:30.067" Score="0" ViewCount="4540" Body="&lt;p&gt;I know that I can add support with this code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:strukturag/libde265 &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get install vlc-plugin-libde265&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But I do try to avoid using ppa. is there another way to install the plugin without using ppa?&#xA;(I have access to git)&lt;/p&gt;&#xA;" OwnerUserId="2797" LastActivityDate="2015-11-15T12:50:31.533" Title="Adding support for the “hevc” format to VLC without using ppa" Tags="|codec|vlc|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2563" PostTypeId="2" ParentId="2562" CreationDate="2015-10-16T12:10:14.967" Score="2" Body="&lt;p&gt;You can upgrade to VLC 2.2.x or higher to get HEVC/H.265 support.To upgrade to latest version please refer  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1892/how-do-i-install-the-latest-version-of-vlc-media-player/2404#2404&quot;&gt;how-do-i-install-the-latest-version-of-vlc-media-player&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(here you need to install &lt;code&gt;gstreamer1.0-libde265&lt;/code&gt; separately)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To add support to &lt;code&gt;hevc&lt;/code&gt; with out PPA please refer &lt;a href=&quot;http://pastebin.com/TP6Rczur&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;,I am just copy &amp;amp; pasting commands here.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get update&#xA; sudo apt-get install git -y&#xA; cd /tmp&#xA; git clone https://github.com/mmstick/ubuntu-10bit-encoding-tools&#xA; cd ubuntu*&#xA; ./install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;source &lt;a href=&quot;https://askubuntu.com/questions/362745/how-to-install-h-265-hevc-codec-on-ubuntu-linux&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-16T12:10:14.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2564" PostTypeId="2" ParentId="2517" CreationDate="2015-10-16T12:56:37.487" Score="0" Body="&lt;p&gt;When you boot on your usb stick and you are presented with this screen:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cJfNx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cJfNx.jpg&quot; alt=&quot;grub chooser&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press 'e' and search for a line like this&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BnUQa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BnUQa.png&quot; alt=&quot;after pressing e&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and put before quiet splash &lt;code&gt;nomodeset&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that fixes your issue, it is graphics related, and you might have to repeat this process even after the installation until you installed the correct drivers.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-16T12:56:37.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2565" PostTypeId="1" CreationDate="2015-10-16T13:38:05.623" Score="1" ViewCount="143" Body="&lt;p&gt;My laptop doesn't have multimedia keyboard so I want to know if there's some way to have hotkeys for next, previous song in noise music player?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using elementary freya.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="1139" LastEditDate="2015-10-16T16:13:26.500" LastActivityDate="2015-10-16T18:02:25.890" Title="Is there some plugin or app to add hotkeys to noise music player?" Tags="|release-freya|music|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-20T01:28:34.733" ContentLicense="CC BY-SA 3.0" />
  <row Id="2566" PostTypeId="1" CreationDate="2015-10-16T14:04:36.027" Score="3" ViewCount="116" Body="&lt;p&gt;To save my eyes I have RedShift installed but everytime I delete something it momentarily switches off and back on again.  Is this something I can sort out at this end?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help,&#xA;Duncan&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freya 0.3.1 64-bit&#xA;Dell Optiplex 745&lt;/p&gt;&#xA;" OwnerUserId="2801" LastActivityDate="2016-11-05T15:38:32.420" Title="Delete suspends RedShift" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2567" PostTypeId="2" ParentId="1319" CreationDate="2015-10-16T14:04:44.710" Score="2" Body="&lt;p&gt;This is a typical problem for AMD proprietary drivers. For it can not affect anybody, except AMD. Only one way out - use default free driver.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-16T14:04:44.710" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2568" PostTypeId="1" AcceptedAnswerId="2573" CreationDate="2015-10-16T17:47:17.973" Score="2" ViewCount="5341" Body="&lt;p&gt;I spend all day trying to fix the problem but it was impossible.&#xA;I updated my OS from update manager. I ran a game on steam and the pc has got freeze and then, I rebooted whit button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to login in login screen, appear one second the desktop, then back to login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reinstalled the headers, I checked the Xauthority and several other things but anything worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need help!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: my OS is Elementary OS Freya.&#xA;I already tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2443/cant-login-after-upgrade&quot;&gt;Check out Xauthority&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/227502/where-are-steam-games-installed&quot;&gt;Remove Steam and Steam Games&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2eade1/stuck_at_login_screen/&quot; rel=&quot;nofollow&quot;&gt;All this&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2241210&quot; rel=&quot;nofollow&quot;&gt;sudo apt-get install --install-recommends...&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/203391/elementary-os-accidentally-installed-ubuntu-login-screen&quot;&gt;remove unity-greeter but It is not installed&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;EDIT 2:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://answers.launchpad.net/elementaryos/+question/231335&quot; rel=&quot;nofollow&quot;&gt;removed two files&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;EDIT 3:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sudo apt-get install --reinstall plank&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get install --reinstall elementary-tweaks&lt;/li&gt;&#xA;&lt;li&gt;Installed last graphics drivers from &lt;a href=&quot;https://01.org/linuxgraphics/downloads/intel-graphics-installer-linux-1.2.0&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;EDIT 4:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://vid.me/HTUx&quot; rel=&quot;nofollow&quot;&gt;VIDEO EXPLAINING ISSUE&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="462" LastEditorUserId="462" LastEditDate="2015-10-16T22:23:15.340" LastActivityDate="2017-05-25T20:29:39.903" Title="I can't login , return to login screen (it isn't Xauthority)" Tags="|greeter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2569" PostTypeId="2" ParentId="2565" CreationDate="2015-10-16T17:49:11.650" Score="1" Body="&lt;p&gt;You can control noise with the following cmd:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dbus-send --print-reply --dest=org.mpris.MediaPlayer2.Noise /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.XXX&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;code&gt;XXX&lt;/code&gt; you can put Play, Pause, PlayPause, Next, Previous or Stop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you see how you configure a shortcut:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/370/37&quot;&gt;https://elementaryos.stackexchange.com/a/370/37&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-16T18:02:25.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2570" PostTypeId="2" ParentId="2568" CreationDate="2015-10-16T19:44:22.877" Score="1" Body="&lt;p&gt;Did you try reinstalling Pantheon Desktop?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or reinstalling pantheon-greeter (you have tried to reinstall lightdm, but it's called pantheon-greeter)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-16T19:44:22.877" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2571" PostTypeId="2" ParentId="1674" CreationDate="2015-10-16T20:36:22.713" Score="1" Body="&lt;p&gt;I had many issues getting my GTX 750 Ti to run on my 21:9 monitor. Without the graphics card, the monitor worked. When I put the graphics card in with no drivers, it gave me a black screen. I installed drivers from the Software Center to get the display to work, but it only displayed at a 4:3 screen ratio. I tried to install proprietary drivers from the Xorg and the display did not work at all. So I took them off.  So how I was able to fix it was; I started with the non-proprietary drivers in and the GPU hooked up, then went to NVIDIA's website to download the files for the latest drivers supporting my card. Then I followed the steps on the following link to get the drivers properly installed:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/149206/how-to-install-nvidia-run&quot;&gt;https://askubuntu.com/questions/149206/how-to-install-nvidia-run&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This worked for me with my Elementary OS. Hopefully it works for you too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just a recap in step-by-step writing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) install &quot;current version&quot; of non-proprietary drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) download files for latest NVIDIA drivers from their website (note the file path to the file)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) plug in your graphics card&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) enter x terminal by pressing CTRL+ALT+F1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5) Follow the instruction in the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/149206/how-to-install-nvidia-run&quot;&gt;https://askubuntu.com/questions/149206/how-to-install-nvidia-run&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;---Command should look something like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo service lightdm stop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo init 3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd [path/to/NVIDIA]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo sh ./NVIDIA*&lt;/p&gt;&#xA;" OwnerUserId="2803" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-16T20:36:22.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2572" PostTypeId="1" CreationDate="2015-10-16T23:07:10.837" Score="0" ViewCount="116" Body="&lt;p&gt;I recently updated Google Chrome and&#xA;also encountered this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/one-of-my-apps-has-a-second-fuzzy-icon-in-plank-how-can-i-workaround-this&quot;&gt;problem&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After doing a reboot I noticed that Google Chrome now appears twice searching for it in slingshot&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attaching a screenshot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yXP0c.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yXP0c.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="140" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-08-26T08:41:48.320" Title="Google Chrome appears twice in slingshot" Tags="|release-freya|icons|slingshot|google-chrome|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2573" PostTypeId="2" ParentId="2568" CreationDate="2015-10-16T23:13:01.470" Score="0" Body="&lt;p&gt;I added an user and I could join in.&#xA;Removed elementary-tweaks and numix-icon then I could join again with my user...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed again elementary tweaks and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this works for anyone.&lt;/p&gt;&#xA;" OwnerUserId="462" LastActivityDate="2015-10-16T23:13:01.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2575" PostTypeId="1" CreationDate="2015-10-17T14:14:18.800" Score="4" ViewCount="74" Body="&lt;p&gt;I'm a newbie with Elementary. How do I do a file search with Files? (I don't see a search box like in other file managers). Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2015-10-17T14:14:18.800" Title="How do I search files with pantheon-files" Tags="|pantheon-files|" AnswerCount="0" CommentCount="4" ClosedDate="2015-10-17T14:29:22.917" ContentLicense="CC BY-SA 3.0" />
  <row Id="2576" PostTypeId="1" AcceptedAnswerId="2603" CreationDate="2015-10-17T16:09:21.800" Score="0" ViewCount="107" Body="&lt;p&gt;Will the new indicators contained in the staging ppa (and shown on G+) make it in freya? Or will we have to wait for the next release?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not interested in testing it, I want to know if it'll be released as stable in freya&lt;/p&gt;&#xA;" OwnerDisplayName="user2811" LastEditorUserId="37" LastEditDate="2015-10-19T15:04:40.130" LastActivityDate="2015-10-19T15:06:00.577" Title="Will the new indicators be released for freya?" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2577" PostTypeId="1" AcceptedAnswerId="2582" CreationDate="2015-10-17T17:08:46.473" Score="3" ViewCount="4336" Body="&lt;p&gt;As far as I am concerned &lt;code&gt;sudo apt-get install ruby-full&lt;/code&gt; only installs Ruby 1.9.3, which is an old stable release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I install the latest, stable Ruby release (v. 2.2.3) on elementary OS (Freya)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="747" LastActivityDate="2015-10-18T01:50:34.700" Title="How to install Ruby 2.2.3 on elementary OS (Freya)?" Tags="|release-freya|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2579" PostTypeId="1" CreationDate="2015-10-17T19:24:42.513" Score="1" ViewCount="52" Body="&lt;p&gt;I'm trying to use elementary on my multi-monitor setup and I have this annoying issue with switching apps&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to keep apps visible on the other monitor and switch apps only on the active monitor&lt;/p&gt;&#xA;" OwnerUserId="2813" LastActivityDate="2015-10-17T19:24:42.513" Title="alt-tab hides apps on other monitor" Tags="|window-management|display|window-manager|" AnswerCount="0" CommentCount="1" ClosedDate="2015-10-21T13:41:11.320" ContentLicense="CC BY-SA 3.0" />
  <row Id="2580" PostTypeId="2" ParentId="2577" CreationDate="2015-10-18T01:04:40.827" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install all dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install git-core curl zlib1g-dev build-essential libssl-dev libreadline-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt1-dev libcurl4-openssl-dev python-software-properties libffi-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now select any one of the methods:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.Using &lt;code&gt;rbenv&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;git clone git://github.com/sstephenson/rbenv.git .rbenv&#xA;echo 'export PATH=&quot;$HOME/.rbenv/bin:$PATH&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;echo 'eval &quot;$(rbenv init -)&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;exec $SHELL&#xA;&#xA;git clone git://github.com/sstephenson/ruby-build.git ~/.rbenv/plugins/ruby-build&#xA;echo 'export PATH=&quot;$HOME/.rbenv/plugins/ruby-build/bin:$PATH&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;exec $SHELL&#xA;&#xA;git clone https://github.com/sstephenson/rbenv-gem-rehash.git ~/.rbenv/plugins/rbenv-gem-rehash&#xA;&#xA;rbenv install 2.2.3&#xA;rbenv global 2.2.3&#xA;ruby -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;2.using &lt;code&gt;rvm&lt;/code&gt; (detailed steps &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2577/how-to-install-ruby-2-2-3-on-elementary-os-freya/2582#2582&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libgdbm-dev libncurses5-dev automake libtool bison libffi-dev&#xA;curl -L https://get.rvm.io | bash -s stable&#xA;source ~/.rvm/scripts/rvm&#xA;rvm install 2.2.3&#xA;rvm use 2.2.3 --default&#xA;ruby -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;3.From &lt;code&gt;source&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;wget http://ftp.ruby-lang.org/pub/ruby/2.2/ruby-2.2.3.tar.gz&#xA;tar -xzvf ruby-2.2.3.tar.gz&#xA;cd ruby-2.2.3/&#xA;./configure&#xA;make&#xA;sudo make install&#xA;ruby -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;reference &lt;a href=&quot;https://gorails.com/setup/ubuntu/14.04&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-10-18T01:50:34.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2581" PostTypeId="1" CreationDate="2015-10-18T01:17:40.830" Score="1" ViewCount="259" Body="&lt;p&gt;I have a ASUS ux305f. I downloaded the Netflix app from Ubuntu.  It works fine except that my laptop gets very hot.  Netflix using Windows 10 runs cool.  Are there adjustments I can make to Linux to correct this?&lt;/p&gt;&#xA;" OwnerUserId="2816" LastEditorUserId="3757" LastEditDate="2016-04-20T07:32:26.077" LastActivityDate="2016-04-20T07:32:26.077" Title="Netflix videos run very hot" Tags="|videos|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2582" PostTypeId="2" ParentId="2577" CreationDate="2015-10-18T01:49:48.743" Score="2" Body="&lt;p&gt;Installation using &lt;code&gt;rvm&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;curl&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install curl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;rvm&lt;/code&gt;: (&lt;a href=&quot;https://rvm.io/rvm/security&quot; rel=&quot;nofollow&quot;&gt;secure installation&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3&#xA;&#xA;\curl -O https://raw.githubusercontent.com/rvm/rvm/master/binscripts/rvm-installer&#xA;&#xA;\curl -O https://raw.githubusercontent.com/rvm/rvm/master/binscripts/rvm-installer.asc&#xA;&#xA;gpg --verify rvm-installer.asc &amp;amp;&amp;amp;&#xA;&#xA;bash rvm-installer stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note : If &lt;code&gt;gpg --keyserver&lt;/code&gt; fails use,(first line)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; curl -sSL https://rvm.io/mpapis.asc | gpg --import -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;ruby&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; rvm get stable --autolibs=enable&#xA; rvm install 2.2.3&#xA; rvm --default use ruby-2.2.3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: To list available ruby versions run &lt;code&gt;sudo rvm list known&lt;/code&gt; and select the desired version. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-18T01:49:48.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2583" PostTypeId="1" CreationDate="2015-10-18T07:09:39.837" Score="3" ViewCount="1198" Body="&lt;p&gt;I have the default key combination of &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; to activate the &lt;code&gt;indicator-synapse&lt;/code&gt;. How can I change it to &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt;?&lt;/p&gt;&#xA;" OwnerUserId="2776" LastEditorUserId="3757" LastEditDate="2016-04-23T11:49:47.143" LastActivityDate="2016-11-16T04:24:17.253" Title="How to change the default hotkey for indicator-synapse?" Tags="|keyboard-shortcuts|luna|wingpanel|search|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2584" PostTypeId="1" CreationDate="2015-10-18T11:16:56.900" Score="0" ViewCount="1192" Body="&lt;p&gt;Hi all and thanks for helping me out here!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to try &lt;a href=&quot;http://jupyter.org/&quot; rel=&quot;nofollow&quot;&gt;Jupyter Notebook (IPython)&lt;/a&gt; on my elementary OS Freya installation, but to compile some Jupyter dependencies I also need &lt;code&gt;python3-dev&lt;/code&gt; which I am not allowed to install by using apt.&lt;/p&gt;&#xA;" OwnerUserId="2818" LastEditorUserId="138" LastEditDate="2015-10-18T20:32:51.737" LastActivityDate="2016-05-16T00:21:48.357" Title="How to install Jupyter(IPython) dependencies on elementary OS Freya" Tags="|release-freya|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2585" PostTypeId="2" ParentId="2584" CreationDate="2015-10-18T11:28:26.757" Score="1" Body="&lt;p&gt;Open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential python3-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: (Use &lt;code&gt;python&lt;/code&gt; instead of &lt;code&gt;python3&lt;/code&gt; for legacy &lt;strong&gt;Python 2&lt;/strong&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i.e.,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential python-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alternative&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a bug &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/python3.4/+bug/1503382&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;..and solved the problem by  forcefully downgrading&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  apt-get install -y \&#xA; python3.4=3.4.0-2ubuntu1.1 \&#xA; python3.4-minimal=3.4.0-2ubuntu1.1 \&#xA; libpython3.4-stdlib=3.4.0-2ubuntu1.1 \&#xA; libpython3.4-minimal=3.4.0-2ubuntu1.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: please note the removing packages before removing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;source &lt;a href=&quot;http://jupyter.readthedocs.org/en/latest/install.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-18T12:14:06.763" LastActivityDate="2015-10-18T12:14:06.763" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2586" PostTypeId="2" ParentId="2584" CreationDate="2015-10-18T11:53:43.323" Score="1" Body="&lt;p&gt;I successfully installed Jupyter using the python package management system PIP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First install PIP for Python 3 from repositories:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install python3-pip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then install Jupyter by using PIP:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo pip3 install jupyter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After Jupyter got successfully installed, you can start it from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;jupyter notebook&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s1S5F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s1S5F.png&quot; alt=&quot;Jupyter&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-10-18T11:58:47.320" LastActivityDate="2015-10-18T11:58:47.320" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2587" PostTypeId="1" AcceptedAnswerId="2588" CreationDate="2015-10-18T13:35:34.907" Score="2" ViewCount="271" Body="&lt;p&gt;Good day,  I tried to boot the elementary OS after repair grub (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1?&lt;/a&gt;), but he has returned me the error attached in the picture and I can no longer access the OS.. also i can´t reach Elementary OS booting from USB pen drive (stuck on black screen)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I´m on a Lenovo z40-70 and win8.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lGsIo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lGsIo.jpg&quot; alt=&quot;error: verification failed&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to response from @Ravan.&lt;/p&gt;&#xA;" OwnerUserId="2819" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-06T14:13:46.217" Title="After repair grub error to boot SO" Tags="|grub|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2588" PostTypeId="2" ParentId="2587" CreationDate="2015-10-18T14:42:45.190" Score="2" Body="&lt;p&gt;I faced similar problem.The solution is &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;disable secure boot in the bios security tab &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-18T14:42:45.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2590" PostTypeId="2" ParentId="2519" CreationDate="2015-10-18T16:25:25.607" Score="1" Body="&lt;p&gt;Thank you to everyone who tried to help. Eventually a friend and I figured it out. Because I installed elementary OS while it was still in beta, there were some problems with the update. Eventually (After thoroughly backing up) I manually installed the most recent kernel. That seems to have fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="2524" LastEditorUserId="2708" LastEditDate="2015-12-31T08:31:36.370" LastActivityDate="2015-12-31T08:31:36.370" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2591" PostTypeId="1" AcceptedAnswerId="2592" CreationDate="2015-10-18T17:43:44.787" Score="5" ViewCount="6302" Body="&lt;p&gt;Is there a simple, non-system-breaking way to install Compiz on elementary OS? I replaced Pantheon with the &lt;code&gt;gnome-terminal&lt;/code&gt; so a lot of the tutorials  I found don't appear to apply.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I installed Compiz on other computers, I simply did &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install compizconfig-settings-manager&#xA;sudo apt-get update&#xA;ccsm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it worked fine. However, they were using the Unity DE. Will it work with whatever elementary OS is using (GNOME I think, not sure though)? It hasn't worked on other GNOME-using distros I have used. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer is brand-new and I spent a lot of time getting elementary OS to play nice with Windows 10, so I am a little nervous about just flat-out experimentation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My operating system is Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!!&lt;/p&gt;&#xA;" OwnerUserId="2817" LastEditorUserId="308" LastEditDate="2018-08-07T17:17:40.257" LastActivityDate="2021-02-05T19:02:52.340" Title="Can you install Compiz on elementary OS?" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2592" PostTypeId="2" ParentId="2591" CreationDate="2015-10-18T18:32:15.463" Score="13" Body="&lt;p&gt;The desktop environment used is Pantheon, not Gnome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And since elementary OS uses Gala (which is based on the Gnome 3 window manager Mutter) - not Compiz - as it's window manager, you can't use the Compiz Config manager: One could say, it's the core of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="2824" LastEditorUserId="34" LastEditDate="2015-12-31T13:55:43.270" LastActivityDate="2015-12-31T13:55:43.270" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2593" PostTypeId="1" CreationDate="2015-10-18T18:53:59.877" Score="11" ViewCount="2069" Body="&lt;p&gt;I would like to change the alert noise from the default dripping noise that you hear when, for instance, you try to alt-tab with only one application open. I didn't find it in the sound settings so how do you change it?&lt;/p&gt;&#xA;" OwnerUserId="628" LastActivityDate="2018-07-10T14:14:09.270" Title="How do you change the alert sound?" Tags="|sound|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2594" PostTypeId="1" CreationDate="2015-10-18T23:34:08.503" Score="-1" ViewCount="219" Body="&lt;p&gt;I was happily watching a TV show episode and 5 minutes later I am with a fried computer. I am going step by step with what just happened:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was using VLC when suddently the video stopped working and after 10-20 seconds a warning message from VLC popped up, said something like it couldn't reproduce the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then everything started freezing really fast, I could barely do one task, minimize and maximize some windows and 10 seconds later the system completely froze.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I forced shutdown the computer holding the button and started it again. It starts, shows the Acer logo, then the Windows startup menu, I press Escape so Grub can show up, here's where I have elementary OS as well as Ubuntu. Surprise. Frozen black screen and Grub does not show up. After a few seconds I get a screen saying &lt;code&gt;error: unknown filesystem. Entering rescue mode...&lt;/code&gt; and a &lt;code&gt;grub rescue&amp;gt;&lt;/code&gt; prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I shut down and restart again 3-4 more times and the same thing keeps happening. Then the 4th or 5th time I restart the computer not even the Windows startup menu is showing up, it just froze at the Acer logo. Shutdown again and now the Windows menu is up, press Escape, and same story with Grub. It's gone. Again that error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I shutdown again and it stalls for a while in the Acer screen but finally the Windows menu shows up. And I'm like well &quot;would even Windows work?&quot;. Nope, it doesn't. Trying to start Windows just brings back the Acer screen and it's locked there as I am typing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here I am, with a totally fried computer where I have all my work and tools I need everyday.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need urgent help, please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: when I start up the computer there's a weird cracking repeating sound. Fried hard drive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit2: now after the Acer screen it says PXE-E61: Media test failure, check cable. PXE-M0F: Exiting Broadcom PXE ROM. No bootable device -- insert boot disk and press any key&lt;/p&gt;&#xA;" OwnerUserId="891" LastEditorUserId="891" LastEditDate="2015-10-19T00:30:10.030" LastActivityDate="2016-01-19T14:01:47.333" Title="error: unknown filesystem" Tags="|release-freya|boot|system|filesystem|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2595" PostTypeId="1" CreationDate="2015-10-19T03:03:04.687" Score="0" ViewCount="85" Body="&lt;p&gt;Well, I have a problem when try to login into my session of Elementary OS and have connected the video card Nvidia Fx5200, but I need the video card because if I disconnect the video card, the OS run very slow and I can't use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I try to login to my session when the video card is disconnected, and I can login correctly!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My PC is:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Intel Pentium 4 3.0 ghz&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Nvidia Fx5200 256mb&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;HDD 500gb&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;OS: Elementary Freya stable 0.3.1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Well, I think this is all&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please How I fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2825" LastActivityDate="2016-07-15T08:07:24.700" Title="Can't login Fx5200" Tags="|intel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2596" PostTypeId="2" ParentId="2595" CreationDate="2015-10-19T03:40:02.250" Score="0" Body="&lt;p&gt;Your Nvidia Fx5200 is nearly 12 years &lt;strong&gt;old&lt;/strong&gt; now.Refer &lt;a href=&quot;https://en.wikipedia.org/wiki/GeForce_FX_series#Hardware_refreshes_and_diversification&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. It's not supported by the Nvidia current driver anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the 173.x branch of the driver.Refer &lt;a href=&quot;http://www.nvidia.com/object/linux-display-ia32-173.14.36-driver.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-19T03:40:02.250" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="2597" PostTypeId="2" ParentId="2517" CreationDate="2015-10-19T05:25:09.190" Score="1" Body="&lt;p&gt;To fix the &lt;code&gt;nomodeset&lt;/code&gt; boot option permanently,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then add &lt;code&gt;nomodeset&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;#GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=10&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then save and exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that you need to update &lt;code&gt;grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-19T05:25:09.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2600" PostTypeId="1" AcceptedAnswerId="2601" CreationDate="2015-10-19T14:08:34.940" Score="4" ViewCount="4216" Body="&lt;p&gt;When  I try to update elementary OS it gives me this error:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mR0qv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mR0qv.png&quot; alt=&quot;software updater error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And in terminal it gives me this one:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/sWxQf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sWxQf.png&quot; alt=&quot;Terminal error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if I then use apt-get upgrade, it installs all updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix it?&lt;/p&gt;&#xA;" OwnerUserId="2830" LastEditorUserId="3757" LastEditDate="2016-05-05T07:07:36.487" LastActivityDate="2016-05-05T07:07:36.487" Title="Update error elementary OS freya" Tags="|updates|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2601" PostTypeId="2" ParentId="2600" CreationDate="2015-10-19T14:40:37.527" Score="5" Body="&lt;p&gt;Open terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:versable/elementary-update&#xA;sudo apt-get clean&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should solve your problem.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;General solution&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Failed to download repository information&lt;/strong&gt;&lt;br&gt;&#xA;Check your Internet connection.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and run &lt;code&gt;sudo apt-get update&lt;/code&gt; then identify the errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once identified root cause of this update error, the next step is to remove them from the list of software sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;software&amp;amp;Updates&lt;/code&gt; or &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;  if you identified PPA.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;One line solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/* &#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-19T15:36:38.157" LastActivityDate="2015-10-19T15:36:38.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2602" PostTypeId="1" CreationDate="2015-10-19T14:54:12.693" Score="1" ViewCount="539" Body="&lt;p&gt;When I open terminal through application menu (top left side menu) or from dock, then terminal opens with focus on it, over all other windows. &#xA;When I try to open terminal through a shortcut, terminal opens behind focused window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to make terminal be on top of other windows on launch through a shorctcut?&lt;/p&gt;&#xA;" OwnerUserId="1192" LastActivityDate="2016-03-12T22:32:02.630" Title="Terminal does not have focus on launch through a shortcut" Tags="|release-freya|pantheon-terminal|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2603" PostTypeId="2" ParentId="2576" CreationDate="2015-10-19T15:06:00.577" Score="4" Body="&lt;p&gt;The new indicators will most likely be available with the next elementary OS version. &lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-10-19T15:06:00.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2604" PostTypeId="1" CreationDate="2015-10-19T16:37:51.323" Score="0" ViewCount="228" Body="&lt;p&gt;My OS &lt;strong&gt;Luna&lt;/strong&gt; was updated. After starting it again it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It starts and I can see the Elementary logo for a short time. After that I see a black screen with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Luna k tty1 &#xA;k login:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After a short time it shows automatically:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Luna k tty1 &#xA;k login: [ 367.090627] iwl4965 0000:03:00.0 Aggregation not enabled for tid 0 because load = 5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after a few minutes it shows &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[109.150665] Aggregation not enabled for tid 0 because load = 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I type in my login quickly when the black screen is shown I can't enter, because it asks for a password, but it is not shown that I type in anything and it sys that the login is incorrect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the difference between the login and the password?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wait. I guess I entered. but the black screen is still there. But I can run &quot;ls&quot; and I can see my folders at least.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do I have to do to use elementary OS like before?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why doesn't it start like before?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't use my laptop anymore and I don't have access to any data on it. Please help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="2833" LastEditorUserId="45" LastEditDate="2015-10-20T18:44:57.570" LastActivityDate="2015-10-20T23:59:49.927" Title="Luna will not start after update" Tags="|updates|luna|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2605" PostTypeId="1" AcceptedAnswerId="2609" CreationDate="2015-10-19T17:21:34.767" Score="1" ViewCount="3761" Body="&lt;p&gt;I have an old pc (Dual core, 2gb ram (No graphic card because now is damaged) I used Windows 10 just for Work (My creative cloud subscription) and thanks to the subreddit [/r/unixporn][1 I've installed Freya (my first time in linux) and now I love linux and that OS. but when I installed Elementary OS Freya I did not create the swap partition (I did not know almost nothing about linux and so install it) but now my pc stays stuck in certain times and according to I have read on websites the swap memory help the computers with low ram memory (2gb or less) the question is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How I can create the swap memory without installing elementary os again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 4gb free space for the swap memory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The swap memory it can cause problem with the windows 10 installation?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that you help me, Im newbie in linux&lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="84" LastEditDate="2018-05-15T12:29:53.320" LastActivityDate="2018-05-15T12:29:53.320" Title="Create swap partition" Tags="|release-freya|system-installation|dual-boot|swap|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2606" PostTypeId="1" AcceptedAnswerId="2608" CreationDate="2015-10-19T19:38:33.753" Score="6" ViewCount="805" Body="&lt;p&gt;So I have a few apps docked on my plank, but I notice some apps not showing up on plank anymore when I have it opened. For example, if I load scratch-text-editor from the slingshot launcher, it will load up but the icon does not show up in plank. The only way I can see scratch-text-editor in plank is if I alt+tab and switched through the opened apps OR if I pinned scratch before opening it. I think the issue is that it only shows pinned apps on plank so opening any new app that was not pinned will not show up, very odd. I tried reinstalling plank and that didn't fix the issue either.&lt;/p&gt;&#xA;" OwnerUserId="2684" LastActivityDate="2015-10-19T23:09:02.240" Title="Something strange going on with plank" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2607" PostTypeId="1" AcceptedAnswerId="2634" CreationDate="2015-10-19T20:48:09.287" Score="2" ViewCount="212" Body="&lt;p&gt;Dell provides a driver manager for installing its drivers on the Dell M3800 running Ubuntu. It's called the Dell Driver Installer and is available through the Ubuntu software centre. Since Freya is based on Ubuntu, I was hoping to install its drivers in this way, but it does not work. The installer simply hangs and nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make this installer work or, alternatively, how can I install the drivers?&lt;/p&gt;&#xA;" OwnerUserId="2836" LastActivityDate="2016-09-27T08:56:58.270" Title="Dell Precision M3800 drivers" Tags="|release-freya|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2608" PostTypeId="2" ParentId="2606" CreationDate="2015-10-19T23:09:02.240" Score="5" Body="&lt;p&gt;Run &lt;code&gt;plank --preferences&lt;/code&gt; and select &quot;Show Unpinned&quot; on Behaviour-tab.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/CoTAN.png&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CoTAN.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-19T23:09:02.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2609" PostTypeId="2" ParentId="2605" CreationDate="2015-10-20T03:28:16.493" Score="6" Body="&lt;p&gt;This answer is after the discussion in &lt;a href=&quot;http://chat.stackexchange.com/rooms/30459/discussion-between-ravan-and-revod&quot;&gt;chat&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you have to do two things , &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 . Deleting the /swapspace file created using &lt;a href=&quot;https://askubuntu.com/a/566750/452466&quot;&gt;AU question&lt;/a&gt;.&lt;br&gt;&#xA;2 . Creating &lt;code&gt;swap&lt;/code&gt; in unallocated space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 . Open terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo swapoff /swapspace&#xA;sudo rm /swapspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2 .  Install gparted,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; Careful while selecting partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open gparted and select &lt;strong&gt;unallocated space.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click on it , select &lt;code&gt;new&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then select &lt;code&gt;file system&lt;/code&gt; as &lt;code&gt;linux-swap&lt;/code&gt; and &lt;code&gt;logical partition&lt;/code&gt;(If not possible select &lt;code&gt;primary partition&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then , right click on partition and make &lt;code&gt;swapon&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; Don't forget to &lt;strong&gt;apply changes&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can verify swap by the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /proc/swaps&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next, add the following line to /etc/fstab to activate the new swap at boot: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sdb3 none swap defaults 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Replace &lt;code&gt;/dev/sdb3&lt;/code&gt; with your swap partition)&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-11-25T16:42:44.697" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2610" PostTypeId="1" CreationDate="2015-10-20T07:59:14.300" Score="0" ViewCount="592" Body="&lt;p&gt;I get so packets, so what...Don't know what the package? How to remove?&lt;a href=&quot;https://i.stack.imgur.com/o73Vt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o73Vt.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2838" LastActivityDate="2015-10-21T13:39:45.377" Title="How to remove this?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="5" ClosedDate="2015-10-25T16:52:26.643" ContentLicense="CC BY-SA 3.0" />
  <row Id="2611" PostTypeId="1" CreationDate="2015-10-20T09:05:10.567" Score="4" ViewCount="12210" Body="&lt;p&gt;I just booted my elementary OS but no gui is loaded..i got promted into a terminal login and even if i log in i still get CLI ..tried startx but i get and error about &lt;strong&gt;initx&lt;/strong&gt;? (if it helps i can post a picture of &lt;code&gt;/var/logs/Xorg.0.log&lt;/code&gt; )&#xA;Yesterday I tried to install virtualbox using aptoide and nothig else..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really have to re-install all the gui and drivers manually to make it working again or there is a quick &quot;tip&quot; to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have elementary OS in dual boot with Windows 8 worked for about one week fine until now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: on the log i can sede Failing back to old probe method fglrx &#xA;Fatal server errore: Caught signal 11 . server aborting&lt;/p&gt;&#xA;" OwnerUserId="2763" LastEditorUserId="3757" LastEditDate="2016-05-06T08:50:27.283" LastActivityDate="2020-11-17T21:30:45.817" Title="Booted my elementary OS but no GUI?" Tags="|graphic-drivers|ubuntu|" AnswerCount="5" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="2613" PostTypeId="2" ParentId="2602" CreationDate="2015-10-20T09:27:29.060" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install compizconfig-settings-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;compizconfig-settings-manager&lt;/code&gt; , then &lt;/p&gt;&#xA;&#xA;&lt;p&gt;General --&gt; General Options --&gt; Focus &amp;amp; Raise behaviour .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Set &lt;code&gt;Focus Prevention Level&lt;/code&gt; to &lt;strong&gt;off&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6iuU0.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-20T09:27:29.060" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2615" PostTypeId="2" ParentId="2611" CreationDate="2015-10-20T11:14:41.430" Score="0" Body="&lt;p&gt;Run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge libxfont1&#xA;sudo apt-get install libxfont1 xorg&#xA;sudo rm ~/.Xauthority&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;source &lt;a href=&quot;https://unix.stackexchange.com/questions/137341/failure-to-startx-on-ubuntu-14-04-after-security-update-missing-libxfont-so-1&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2015-10-20T11:14:41.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2616" PostTypeId="2" ParentId="2611" CreationDate="2015-10-20T13:30:22.310" Score="1" Body="&lt;p&gt;This sounds really like an issue an friend of mine had. He thinks Virtualbox is causing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He fixed it by reinstalling the desktop and rebooting.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can get by an command line by pressing &lt;code&gt;CRTL+ALT+F1&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="242" LastEditDate="2015-10-21T08:00:57.703" LastActivityDate="2015-10-21T08:00:57.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2617" PostTypeId="1" CreationDate="2015-10-20T17:53:58.360" Score="1" ViewCount="640" Body="&lt;p&gt;after great experiences with elementary OS on my desktop pc, I would love to have it on my laptop as well. I'm planing to buy an Dell XPS 13 (the old version without the sick display) and would like to know if any of you guys have run this combination?&#xA;Btw: Is there any kind of list, on which devices elementary run stable?&lt;/p&gt;&#xA;" OwnerUserId="881" LastActivityDate="2015-10-21T01:24:52.313" Title="Does elementary OS run on Dell XPS 13?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2618" PostTypeId="2" ParentId="2561" CreationDate="2015-10-20T18:18:51.847" Score="2" Body="&lt;p&gt;Yes, it is possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll need to set the &lt;code&gt;$STEAM_FRAME_FORCE_CLOSE&lt;/code&gt; environment variable before run Steam. There's a couple ways to do that. The easiest I found is to add the following to the end of &lt;code&gt;~/.profile&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;export STEAM_FRAME_FORCE_CLOSE=1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then end your session and log in again. That should do the trick.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-20T18:18:51.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2620" PostTypeId="1" CreationDate="2015-10-20T19:39:10.990" Score="1" ViewCount="60" Body="&lt;p&gt;I installed this little math program called &lt;a href=&quot;https://launchpad.net/nasc&quot; rel=&quot;nofollow&quot;&gt;NaSC&lt;/a&gt;.&#xA;When I want to &quot;Open sheets&quot;, the app just crashes. &#xA;Nobody else seems to have this problem when using NaSC - at least, nobody seems to have filed any bug reports for it on Launchpad. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I guess the problem is on the elementary OS side of things?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error I get from the Terminal is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;I/O warning : failed to load external entity &quot;/home/paul/.qalculate/definitions/datasets/elements.xml&quot;&#xA;Speicherzugriffsfehler (Speicherabzug geschrieben)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So my noob-guess was, I'd just &lt;em&gt;create&lt;/em&gt; that file in this folder. No luck.&#xA;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System is up-to-date elementary OS Freya 0.3.1 64bit&lt;/p&gt;&#xA;" OwnerUserId="2454" LastEditorUserId="34" LastEditDate="2015-11-19T13:26:18.450" LastActivityDate="2015-12-19T15:33:44.680" Title="NaSC crashes with xml-error" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="4" ClosedDate="2015-12-19T20:53:02.430" ContentLicense="CC BY-SA 3.0" />
  <row Id="2621" PostTypeId="2" ParentId="1659" CreationDate="2015-10-20T19:58:09.247" Score="1" Body="&lt;p&gt;The topic seems a little outdated but following solved the problem for me on elementary OS 0.3.1 Freya 64-bit. Hope that helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1)&lt;/strong&gt; Uninstall dropbox if you have previously installed from the deb package like me;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove dropbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; Install nautilus-dropbox package;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nautilus-dropbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; After the installation is completed, start Dropbox by clicking its icon from the Applications menu and put your credentials (that also makes the panel icon visible)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4)&lt;/strong&gt; Right click the icon on the panel and go to Preferences. Remove the selection for the option &quot;Start Dropbox on system startup&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;5)&lt;/strong&gt; Go to Applications from elementary os &quot;System Settings&quot;. On the startup tab click &quot;+&quot; to add a custom command and type the command below;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=Unity dropbox start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;6)&lt;/strong&gt; Logout and log back in, dropbox should run and start syncing.&lt;/p&gt;&#xA;" OwnerUserId="2843" LastEditorUserId="2843" LastEditDate="2015-10-20T20:06:54.257" LastActivityDate="2015-10-20T20:06:54.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2622" PostTypeId="1" AcceptedAnswerId="2627" CreationDate="2015-10-20T21:23:17.367" Score="0" ViewCount="1817" Body="&lt;p&gt;I have dual boot my computer with Windows 10 and elementary OS Freya, I Follow this step: &lt;a href=&quot;http://elementaryosandmore.blogspot.co.uk/2013/06/tweak-your-startup-with-this-nice.html&quot; rel=&quot;nofollow&quot;&gt;Tweak your startup with this nice elementary-styled bootloader theme&lt;/a&gt; I type the command in the terminal and work fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;with the sudo burg-install &quot;(hd0)&quot; I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Installation finished. No error reported.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and in the tutorial said: Congrats, you now have BURG installed on your computer! Go check it out by rebooting your pc! If you want the awesome elementary-ish theme, read further!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I Installed that theme moving the files for the folder with root privilegies but when I reboot my computer nothing happen I press &quot;T&quot; (like said in the blog) for select the theme and nothing happen, press F3 for the resolution and nothing happen, why? &lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="2382" LastEditDate="2015-10-20T21:29:17.617" LastActivityDate="2015-10-21T03:33:17.820" Title="Problem with BURG in elementary OS Freya" Tags="|boot|dual-boot|grub|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2623" PostTypeId="1" CreationDate="2015-10-20T21:49:03.367" Score="3" ViewCount="1948" Body="&lt;p&gt;Got an notebook with Full HD resolution on 14&quot;. Now i got the problem that the GUI and all elements are too small to work with them properly.&#xA;Like in windows I'd like to set the scaling factor to 1.25 or to 1.5.&#xA;As mentioned in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1132/interface-scaling-in-full-hd&quot;&gt;this thread&lt;/a&gt;, I can modify the scaling via &lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor VALUE&lt;/code&gt;, but only integer values are allowed and a value of 2 makes everything to big.&#xA;When i change only the text-scaling to whatever value the whole layout is wrecked up (text overlaps other text, etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, does somebody know to scale to a floating point value (the whole interface) like in Windows 8 or 10 (it's called zoom there or something like that).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate your help!&lt;/p&gt;&#xA;" OwnerUserId="2844" LastEditorUserId="5565" LastEditDate="2016-10-06T21:14:04.007" LastActivityDate="2016-12-18T03:11:16.083" Title="Full HD Display at 14&quot; : GUI elements too small" Tags="|display|user-interface|pixel-density|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2624" PostTypeId="2" ParentId="2622" CreationDate="2015-10-20T23:44:58.710" Score="0" Body="&lt;p&gt;Try to run &lt;code&gt;sudo burg-emu&lt;/code&gt; and change the theme and resolution from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this nice tutorial for Ubuntu 14.04, so it should work great with Freya: &lt;a href=&quot;http://develop.alpdesigns.ch/pages/ubuntu/brug-and-theme-configuration.html&quot; rel=&quot;nofollow&quot;&gt;http://develop.alpdesigns.ch/pages/ubuntu/brug-and-theme-configuration.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-20T23:44:58.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2625" PostTypeId="2" ParentId="2604" CreationDate="2015-10-20T23:59:49.927" Score="1" Body="&lt;p&gt;The simple solution :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select advanced options for elementary OS , while booting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select latest &lt;code&gt;kernel&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-10-20T23:59:49.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2626" PostTypeId="2" ParentId="2617" CreationDate="2015-10-21T01:24:52.313" Score="2" Body="&lt;p&gt;elementary OS is made on top of Ubuntu, so any hardware that runs Ubuntu shouldn't have problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a list of &lt;a href=&quot;http://www.ubuntu.com/certification/desktop/models/?query=&amp;amp;category=Laptop&amp;amp;level=Any&amp;amp;release=14.04%20LTS&amp;amp;vendors=Dell&quot; rel=&quot;nofollow&quot; title=&quot;Ubuntu Certified Hardware&quot;&gt;&quot;Ubuntu Certified Hardware&quot;&lt;/a&gt; and the Dell XPS 13 is listed.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-21T01:24:52.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2627" PostTypeId="2" ParentId="2622" CreationDate="2015-10-21T02:42:22.300" Score="1" Body="&lt;p&gt;From your &lt;code&gt;fdisk -l&lt;/code&gt; output &lt;a href=&quot;https://i.imgur.com/Zwq6Fnn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to replace (hd0) with &lt;strong&gt;(hd1)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To customize ,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer&#xA;sudo apt-get update&#xA;sudo apt-get install grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;grub-customizer&lt;/code&gt; then you will see a prompt like this :Click on &quot;yes&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/184y1.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now under &lt;code&gt;List Configuration&lt;/code&gt; --&gt; Right click on the entries you want to hide and click &lt;code&gt;Remove&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-21T03:33:17.820" LastActivityDate="2015-10-21T03:33:17.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2629" PostTypeId="1" CreationDate="2015-10-21T06:11:03.317" Score="2" ViewCount="447" Body="&lt;p&gt;I used the command below to enable the Super Key Menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &quot;['Super_L', 'Super_R']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Command Source: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/27/can-i-change-the-applications-dropdown-shortcut-to-super-not-altf2&quot;&gt;Can I change the Applications Dropdown shortcut to Super not Alt+F2?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to know, if I can use the Super Key to hide the Menu after calling it. Currently, I need to use Esc. &lt;/p&gt;&#xA;" OwnerUserId="2625" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-22T02:05:04.990" Title="Super Key Menu Unhide" Tags="|slingshot|menu|" AnswerCount="2" CommentCount="3" ClosedDate="2015-11-29T00:56:23.873" ContentLicense="CC BY-SA 3.0" />
  <row Id="2630" PostTypeId="1" CreationDate="2015-10-21T06:51:46.613" Score="0" ViewCount="358" Body="&lt;p&gt;I after a system update when i restarted my computer cant login in my main account. After i type the password screen goes black and throw me again at login screen. I can login with as guest.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I loged in with cairo-dock but many things are missing and i noticed that there is only the Greek language installed. I cant change to english or add it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone knows what is going on ?&lt;/p&gt;&#xA;" OwnerUserId="2847" LastActivityDate="2015-12-20T08:57:21.287" Title="Cant login to my main account after System Update" Tags="|greeter|updates|desktop|language|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2631" PostTypeId="2" ParentId="2630" CreationDate="2015-10-21T07:17:28.163" Score="0" Body="&lt;p&gt;This is one possible way to solve the problem .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.Open tty by &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;&lt;kbd&gt;T&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 . Login &lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 . &lt;code&gt;cd ~&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 . &lt;code&gt;sudo mv .Xauthority .XauthorityBak&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5 .  &lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6 .  &lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-21T07:38:09.807" LastActivityDate="2015-10-21T07:38:09.807" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2632" PostTypeId="2" ParentId="2630" CreationDate="2015-10-21T07:44:28.660" Score="1" Body="&lt;p&gt;The problem was the pantheon-desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i reinstalled it and now everything works fine.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2847" LastActivityDate="2015-10-21T07:44:28.660" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2633" PostTypeId="2" ParentId="2594" CreationDate="2015-10-21T08:07:01.657" Score="0" Body="&lt;p&gt;This really sounds like an hardware failure as both the Windows boot manager has trouble, and as your EFI/bios indicates, it seems to be an issue with your harddrive. To test this, you could boot using a USB stick and see if the problem persists (you could try to backup your hdd with the live mode!).&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-21T08:07:01.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2634" PostTypeId="2" ParentId="2607" CreationDate="2015-10-21T08:12:30.087" Score="1" Body="&lt;p&gt;I just searched for your laptop model. The chipset drivers are already installed, so you don't have to worry about that.&#xA;You also already have open-source Nvidia drivers, this are not the official drivers but they are free (as in freedom).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to install the official (non free) drivers, you have to open Slingshot and search for 'additional drivers'. Select the driver you want to install, click on apply, wait until the drivers are done installing and reboot.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2629" LastEditDate="2016-09-27T08:56:58.270" LastActivityDate="2016-09-27T08:56:58.270" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2635" PostTypeId="2" ParentId="2629" CreationDate="2015-10-21T08:51:09.793" Score="-1" Body="&lt;p&gt;This is not possible as for now. The developers are also clear about not being interested on supporting custom key bindings.&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="132" LastEditDate="2015-10-22T09:42:38.080" LastActivityDate="2015-10-22T09:42:38.080" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2636" PostTypeId="1" AcceptedAnswerId="3022" CreationDate="2015-10-21T10:11:02.587" Score="2" ViewCount="203" Body="&lt;p&gt;In Luna I used gnome-do without any issues (gnome-do is great btw).&#xA;In Freya I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;`$ gnome-do&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Do:10915): Wnck-CRITICAL **: wnck_set_client_type got called multiple times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attempt to unlock mutex that was not locked&#xA;Stacktrace:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;at  &amp;lt;0xffffffff&gt;&#xA;  at (wrapper managed-to-native) Gtk.Clipboard.gtk_clipboard_wait_is_text_available (intptr) &amp;lt;0xffffffff&gt;&#xA;  at Gtk.Clipboard.WaitIsTextAvailable () &amp;lt;0x00017&gt;&#xA;  at Do.Universe.SelectedTextItem.UpdateSelection (object,System.EventArgs) &amp;lt;0x00033&gt;&#xA;  at Do.Platform.AbstractApplicationService.OnSummoned () &amp;lt;0x0002d&gt;&#xA;  at Do.Platform.ApplicationService.m__0 (object,System.EventArgs) &amp;lt;0x00013&gt;&#xA;  at Do.Core.Controller.OnSummoned () &amp;lt;0x0002d&gt;&#xA;  at Do.Core.Controller.Summon () &amp;lt;0x00023&gt;&#xA;  at Do.Do.Main (string[]) &amp;lt;0x001e3&gt;&#xA;  at (wrapper runtime-invoke) .runtime_invoke_void_object (object,intptr,intptr,intptr) &amp;lt;0xffffffff&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Native stacktrace:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/bin/cli() [0x4b73d8]&#xA;/lib/x86_64-linux-gnu/libpthread.so.0(+0x10340) [0x7f15cd46d340]&#xA;/lib/x86_64-linux-gnu/libc.so.6(gsignal+0x39) [0x7f15cd0cecc9]&#xA;/lib/x86_64-linux-gnu/libc.so.6(abort+0x148) [0x7f15cd0d20d8]&#xA;/lib/x86_64-linux-gnu/libglib-2.0.so.0(+0x1b1a8) [0x7f15c951b1a8]&#xA;/usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0(gtk_clipboard_wait_for_contents+0x6a) [0x7f15c089085a]&#xA;/usr/lib/x86_64-linux-gnu/libgtk-x11-2.0.so.0(gtk_clipboard_wait_is_text_available+0x22) [0x7f15c0890cd2]&#xA;[0x4198143b]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Debug info from gdb:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could not locate Tomboy on D-Bus. Perhaps it's not running?&#xA;Could not attach to process.  If your uid matches the uid of the target&#xA;process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try&#xA;again as the root user.  For more details, see /etc/sysctl.d/10-ptrace.conf&#xA;ptrace: Operation not permitted.&#xA;No threads.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;=================================================================&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Got a SIGABRT while executing native code. This usually indicates&#xA;a fatal error in the mono runtime or one of the native libraries &#xA;used by your application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;=================================================================&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Aborted (core dumped)`&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read some posts saying it was fixed, others saying that support for gtk2 applications is incomplete. Is there any way to use gnome-do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2848" LastEditorUserId="45" LastEditDate="2015-11-17T18:44:55.173" LastActivityDate="2015-11-17T18:44:55.173" Title="Gnome-do crash at startup at Freya" Tags="|applications|gtk|" AnswerCount="1" CommentCount="4" ClosedDate="2019-04-19T21:58:09.363" ContentLicense="CC BY-SA 3.0" />
  <row Id="2638" PostTypeId="1" CreationDate="2015-10-21T12:33:01.890" Score="0" ViewCount="49" Body="&lt;p&gt;So as the heading states, I did a clean install as an upgrade, rather than upgrading the os from 0.3 to 0.3.1. I basically chose to reformat the drive, because its a work laptop and all my documents are stored on my external.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing the the os using my bootable flash, I can not restart back into elementary, and get directed to the grub command line immediately every time i reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed &lt;a href=&quot;https://www.linux.com/learn/tutorials/776643-how-to-rescue-a-non-booting-grub-2-on-linux/&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; link to try fix any issues with grub, but now i cant even boot through the usb.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice would be great. &lt;/p&gt;&#xA;" OwnerUserId="2849" LastActivityDate="2015-10-21T12:47:51.963" Title="Hard drive partition table seems to have broken during a clean install of freya 0.3.1" Tags="|release-freya|boot|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-21T13:53:00.947" ContentLicense="CC BY-SA 3.0" />
  <row Id="2639" PostTypeId="2" ParentId="2638" CreationDate="2015-10-21T12:47:51.963" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot;&gt;This worked.&lt;/a&gt; Probably a duplicate, sorry for that.&lt;/p&gt;&#xA;" OwnerUserId="2849" LastActivityDate="2015-10-21T12:47:51.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2640" PostTypeId="2" ParentId="215" CreationDate="2015-10-21T12:48:44.743" Score="5" Body="&lt;p&gt;If you like GUIs and / or are afraid to access directly the config files, a good option is Gnome Disks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install via &lt;code&gt;sudo apt-get install gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set to mount at startup like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/97RxK.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/97RxK.png&quot; alt=&quot;Edit mount options&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/prjdp.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/prjdp.png&quot; alt=&quot;Set options&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-21T12:48:44.743" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2641" PostTypeId="2" ParentId="2610" CreationDate="2015-10-21T13:39:45.377" Score="2" Body="&lt;p&gt;Apparently the answer to this question, hidden in the comments, was to remove the &lt;code&gt;screenfetch&lt;/code&gt; command from &lt;code&gt;~/.bashrc&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-10-21T13:39:45.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2643" PostTypeId="1" CreationDate="2015-10-21T15:52:44.117" Score="2" ViewCount="196" Body="&lt;p&gt;I have a Lenovo E540 with elementary OS, and when I close the lid or put it to suspension it does return. The only solution is to shutdown. I saw &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1631/suspend-not-resuming&quot;&gt;this&lt;/a&gt; post, but the laptop does not have an Nvidia board.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2848" LastEditorUserId="16827" LastEditDate="2019-04-16T14:41:20.913" LastActivityDate="2019-09-13T22:02:15.297" Title="System not returning from suspend mode" Tags="|suspend|lenovo|" AnswerCount="1" CommentCount="0" ClosedDate="2019-10-22T03:18:18.253" ContentLicense="CC BY-SA 3.0" />
  <row Id="2644" PostTypeId="1" CreationDate="2015-10-21T16:33:59.483" Score="0" ViewCount="146" Body="&lt;p&gt;The System Settings Window is the only window, that can't be maximised. Is this a known bug, or did I possibly break something?&lt;/p&gt;&#xA;" OwnerUserId="2842" LastActivityDate="2020-06-18T13:43:49.827" Title="System Settings window can not be maximised" Tags="|settings|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2646" PostTypeId="1" CreationDate="2015-10-21T16:59:08.290" Score="2" ViewCount="1310" Body="&lt;p&gt;I'm having a weird problem with WingPanel. The network indicator isn't present at all and used to be, and I'm not seeing my other tray items as I should be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sCIIW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sCIIW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should be seeing the network dropdown and Skype, Syncthing, Dropbox, etc., but I see nothing. I'm on a pretty fresh install of Freya, and I'm up to date on all packages as of right now.&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2015-10-23T14:00:28.240" Title="Indicators and icons not appearing in WingPanel" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2648" PostTypeId="1" CreationDate="2015-10-21T21:39:47.103" Score="1" ViewCount="1208" Body="&lt;p&gt;Primeramente los felicito en la realización de gran SO. He instalado en una portátil (laptop) lenovo G50-45 de un amigo, y tengo problema con el wireless, conecto el wiffi y dura como máximo 15 minutos, y se cae la señal. Tengo que reiniciar el portátil para que se vuelva a conectar y vuelve dura el tiempo y se cae...quisiera que me ayudaran a arreglarl. &lt;/p&gt;&#xA;&#xA;&lt;h3&gt;English Translation:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;I don't primarily speak English, I'm using a translator. I really like the operating system. I installed the operating system on a laptop from a friend, and I have problems with the wi-fi. I connect to the network, and connected, but after 15 minutes it falls, and does not connect anymore. I have to restart the laptop and the problem recurs. I also see that the battery lasts for 62.5% (4 hours 100%). The laptop is a lenovo G50-45. I appreciate your attention and your cooperation, thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="2850" LastEditorUserId="26" LastEditDate="2015-10-22T15:40:05.127" LastActivityDate="2020-12-13T03:13:10.137" Title="Wireless not working on Lenovo G50-45" Tags="|wifi|battery|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2649" PostTypeId="2" ParentId="1412" CreationDate="2015-10-21T23:39:02.877" Score="1" Body="&lt;p&gt;Today I go to &lt;code&gt;Power button &amp;gt; About This Computer&lt;/code&gt; and click in &lt;code&gt;Check for Updates&lt;/code&gt;, the system download the updates and after reboot you computer and Done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now work fine&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fVVP3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fVVP3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="2382" LastEditDate="2015-10-22T00:12:03.773" LastActivityDate="2015-10-22T00:12:03.773" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2650" PostTypeId="1" CreationDate="2015-10-21T23:51:20.520" Score="11" ViewCount="10295" Body="&lt;p&gt;How can I change the name of my paired, remote Bluetooth devices (e.g., &quot;Jabra a1.55.30&quot; to &quot;My headset&quot;)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm comfortable using the CLI, if that is more efficient.&lt;/p&gt;&#xA;" OwnerUserId="2852" LastEditorUserId="5565" LastEditDate="2016-10-20T15:20:50.030" LastActivityDate="2024-02-03T14:34:50.120" Title="How can I change the names of paired/connected remote bluetooth devices?" Tags="|settings|bluetooth|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2651" PostTypeId="2" ParentId="2646" CreationDate="2015-10-22T02:01:08.330" Score="1" Body="&lt;p&gt;&lt;em&gt;This is a possible solution, I am not sure whether it is exact solution or not&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(please comment if you want to downvote).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The possible reason for Indicators and icons missing in WIngPanel is:     &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sometimes dependencies are getting removed: (most of the cases these are the &lt;em&gt;culprits&lt;/em&gt; )  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;indicator-application&lt;br&gt;&#xA;xdg-user-dirs&lt;br&gt;&#xA;xdg-user-dirs-gtk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-application xdg-user-dirs xdg-user-dirs-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-23T14:00:28.240" LastActivityDate="2015-10-23T14:00:28.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2652" PostTypeId="1" CreationDate="2015-10-22T09:54:55.517" Score="3" ViewCount="1512" Body="&lt;p&gt;I've tried to install elementary OS on a late 2010 27&quot; iMac with ATI Radeon 4670.&#xA;The test run via thumb drive worked fine, but after installation and reboot a black screen occured. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is that rEFInd doesn't allow the interruption of startup procedere (SHIFT and ESC won't work) for NOMODESET parameter.&#xA;How can I enter the Grub2 startup menu? And after that, how can I fix the ATI display driver issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is highly appreciated! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: &#xA;Any tips available? I'm still facing this issues&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Btw - is it recommended to use rEFInd as a boot loader for a dual boot OSX/Linux system? Or should I go with the Mac boot loader (pressing 'alt' during start)? Does this fix my problems with entering Grub menu?&lt;/p&gt;&#xA;" OwnerUserId="2854" LastEditorUserId="2854" LastEditDate="2015-10-24T11:59:21.917" LastActivityDate="2022-01-13T04:57:57.480" Title="iMac and rEFInd: black screen after installation" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2655" PostTypeId="1" CreationDate="2015-10-22T11:23:17.473" Score="1" ViewCount="50" Body="&lt;p&gt;I passed elementary OS into a 128gb flash as instructed. However, when I boot from the flash, I can't install the elementary OS. Most times I see the e logo and then a black screen with no windows or bars, only the mouse pointer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="2815" LastEditorUserId="3757" LastEditDate="2016-04-20T07:34:43.793" LastActivityDate="2016-04-20T07:34:43.793" Title="Installation problems" Tags="|system-installation|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2656" PostTypeId="1" CreationDate="2015-10-22T12:17:57.087" Score="1" ViewCount="571" Body="&lt;p&gt;Im using Elementary OS 0.3.1 Freya.&#xA;After a recent update, i got these new settings in my system settings.&#xA;A parental control, new network, new universal access, new mouse &amp;amp; touchpad plugins were added. The wingpanel takes some time to load the clock and other icons after startup. My software-center wont start either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the message I get after I try to start software center from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (software-center:7872): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-WYbumqnp5N: Connection refused&#xA;2015-10-22 17:44:05,005 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None'&#xA;Traceback (most recent call last):&#xA;File &quot;/usr/bin/software-center&quot;, line 130, in &amp;lt;module&amp;gt;&#xA;app = SoftwareCenterAppGtk3(options, args)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 407, in __init__&#xA;self.icons)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 79, in __init__&#xA;self._get_emblems(self.icons)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 199, in _get_emblems&#xA;pb = icons.load_icon(emblem, self.ICON_SIZE, 0)&#xA;gi._glib.GError: Error opening file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2855" LastEditorUserId="2708" LastEditDate="2015-10-22T16:47:09.793" LastActivityDate="2015-10-22T16:47:09.793" Title="Uninstall parental control plugin in system settings" Tags="|wingpanel|pantheon-terminal|" AnswerCount="0" CommentCount="17" ClosedDate="2019-02-20T16:32:18.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="2657" PostTypeId="1" CreationDate="2015-10-22T13:43:37.577" Score="11" ViewCount="11885" Body="&lt;p&gt;I am using elementary OS Freya. How to reset elementary OS settings to default without reinstalling, and without using &lt;a href=&quot;http://www.elementarynow.com/applications/timeshift/&quot; rel=&quot;noreferrer&quot;&gt;Timeshift&lt;/a&gt;? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no option like &lt;kbd&gt;Restore Default Settings&lt;/kbd&gt; under about:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5pr0a.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5pr0a.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="4688" LastEditDate="2016-04-10T04:36:41.917" LastActivityDate="2016-08-17T19:51:48.000" Title="How to reset elementary OS settings to default without reinstalling?" Tags="|release-freya|settings|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2660" PostTypeId="1" AcceptedAnswerId="2664" CreationDate="2015-10-22T15:06:18.250" Score="2" ViewCount="438" Body="&lt;p&gt;I am using elementary OS freya. How to customize (add or remove) applications in system settings window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example,&lt;br&gt;&#xA;Removing sound icon under hardware section in system settings.&lt;br&gt;&#xA;Adding an application to system settings window .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have considered the above two cases as examples. I found a similar link &lt;a href=&quot;https://askubuntu.com/questions/108060/is-it-possible-to-add-custom-items-to-system-settings-window&quot;&gt;is-it-possible-to-add-custom-items-to-system-settings-window&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-23T02:50:22.393" Title="How to customize system settings window" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2661" PostTypeId="2" ParentId="2648" CreationDate="2015-10-22T15:15:48.317" Score="1" Body="&lt;p&gt;Please open the terminal and enter this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -C network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Drop the results on &lt;a href=&quot;http://pastebin.com&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com&lt;/a&gt; and link it here.&lt;/p&gt;&#xA;" OwnerUserId="2824" LastActivityDate="2015-10-22T15:15:48.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2662" PostTypeId="2" ParentId="2648" CreationDate="2015-10-22T15:17:57.503" Score="0" Body="&lt;p&gt;First please run the following script (&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=370108&quot; rel=&quot;nofollow&quot;&gt;taken from Ubuntu Forums&lt;/a&gt;) in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info &amp;amp;&amp;amp; \&#xA;chmod +x wireless-info &amp;amp;&amp;amp; \&#xA;./wireless-info&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will create a file called &lt;code&gt;wireless-info.txt&lt;/code&gt;, please paste the infos in &lt;a href=&quot;http://hastebin.com/&quot; rel=&quot;nofollow&quot;&gt;hastebin&lt;/a&gt; or similar and link it in your original question.&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-10-22T15:17:57.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2663" PostTypeId="1" CreationDate="2015-10-22T17:54:20.050" Score="4" ViewCount="353" Body="&lt;p&gt;I've set the configs to go to sleep after 30  minutes of inactivity when the laptop is plugged in but there's just a notify that indicates the laptop will go to sleep because of inactivity soon but it never goes to sleep.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody has a similar problem? or some idea of what could it be?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary Freya on Toshiba satellite c655.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="1139" LastEditDate="2015-10-26T20:10:26.323" LastActivityDate="2015-10-26T20:10:26.323" Title="sleep mode not working when is plugged in" Tags="|release-freya|power|" AnswerCount="0" CommentCount="3" ClosedDate="2016-12-30T18:02:28.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="2664" PostTypeId="2" ParentId="2660" CreationDate="2015-10-22T18:46:48.190" Score="1" Body="&lt;p&gt;System Settings (code named Switchboard) is populated using extensions (called plugs). You cannot add an arbitrary app here. A Switchboard extension must be written.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove the sound plug, use the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove switchboard-plug-gcc-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please be aware that some system components may depend on certain plugs to provide functionality. Generally, removing default plugs is not a good idea.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-22T18:46:48.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2665" PostTypeId="2" ParentId="2657" CreationDate="2015-10-22T18:58:37.720" Score="2" Body="&lt;p&gt;In System Settings &gt; About there is a button &quot;Restore Default Settings&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will reset all system gsettings keys. It will not reset settings for apps or delete any of your personal data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Ah my mistake. This feature hasn't landed as a stable update yet.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-10-24T16:10:27.537" LastActivityDate="2015-10-24T16:10:27.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2666" PostTypeId="2" ParentId="2629" CreationDate="2015-10-22T19:17:23.987" Score="2" Body="&lt;p&gt;You can use &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;space&lt;/kbd&gt; to open and hide the menu too.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="2708" LastEditDate="2015-11-22T02:05:04.990" LastActivityDate="2015-11-22T02:05:04.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2667" PostTypeId="2" ParentId="2648" CreationDate="2015-10-22T22:22:12.220" Score="1" Body="&lt;p&gt;This is a known issue with certain Atheros wifi adapters, affecting many models, including the Lenovo G50.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1436940&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2015-10-22T22:22:12.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2668" PostTypeId="1" CreationDate="2015-10-23T03:09:41.690" Score="0" ViewCount="243" Body="&lt;p&gt;I know this has been answered before since I've spent the last few hours attempting to get it to work: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, after trying this method with all the options available from ls I still can't get Elementary OS to load. There is no automatic boot or anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;No idea what to do.&lt;/p&gt;&#xA;" OwnerUserId="2861" LastActivityDate="2015-10-23T03:22:03.930" Title="Grub command line after installing 0.3.1 Freya" Tags="|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-25T14:33:06.577" ContentLicense="CC BY-SA 3.0" />
  <row Id="2669" PostTypeId="2" ParentId="2668" CreationDate="2015-10-23T03:22:03.930" Score="0" Body="&lt;p&gt;I was able to get it to work using the above link and re-creating the freya USB stick using unetboot instead of rufus.&lt;/p&gt;&#xA;" OwnerUserId="2861" LastActivityDate="2015-10-23T03:22:03.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2670" PostTypeId="1" CreationDate="2015-10-23T03:50:36.633" Score="3" ViewCount="2122" Body="&lt;p&gt;i have attached a generic external webcam to my laptop running elementary os freya but i can't see to find a way to change which webcam it uses, it always displays the builtin webcam. Thanks.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastEditorUserId="160" LastEditDate="2015-10-23T11:26:56.427" LastActivityDate="2015-10-23T11:26:56.427" Title="How to change default webcam in the camera app?" Tags="|release-freya|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2671" PostTypeId="2" ParentId="2648" CreationDate="2015-10-23T04:14:21.143" Score="-1" Body="&lt;p&gt;&lt;code&gt;sudo modprobe -r ideapad_laptop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Give that a shot.&lt;/p&gt;&#xA;" OwnerUserId="2861" LastEditorUserId="26" LastEditDate="2015-10-23T22:57:36.293" LastActivityDate="2015-10-23T22:57:36.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2672" PostTypeId="2" ParentId="2670" CreationDate="2015-10-23T07:13:28.337" Score="4" Body="&lt;p&gt;This currenty is not possible, but there already is a bug report filed on &lt;a href=&quot;https://bugs.launchpad.net/snap-elementary/+bug/1445895&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;. You could sign in here and press the &quot;This bug affects me too&quot; button, so the problem get's more attention.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try Cheese in the meantime, which does support multiple webcams.&#xA;You can install it by typing this in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install cheese&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or you could install it with the softwarecenter.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-10-23T07:13:28.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2673" PostTypeId="1" CreationDate="2015-10-23T10:53:39.857" Score="0" ViewCount="482" Body="&lt;p&gt;I recently reinstalled elementary OS and dedicated to it my entire hard drive (well, actually I left some unallocated space in case I want to test some other Linux-based operating system in the future). There were no kernel updates since the reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary now automatically boots up just fine without showing GRUB. So, my question is: is this behavior expected or not? Will GRUB show up once there's a kernel update? Should I worry about something or not?&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-10-27T16:08:49.380" Title="Booting straight into elementary (no GRUB shown) - expected or not?" Tags="|system-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2675" PostTypeId="2" ParentId="2673" CreationDate="2015-10-23T13:44:44.667" Score="1" Body="&lt;p&gt;In the question there are two sub questions to answer.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary now automatically boots up just fine without showing GRUB&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This is normal behaviour. (since It  is not &lt;strong&gt;dual boot&lt;/strong&gt; )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If no other operating system is detected GRUB will boot straight into the default operating system and &lt;strong&gt;no menu&lt;/strong&gt; will be displayed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If another operating system is detected the GRUB  menu will display. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also elementary OS is configured on the system as the default, I think the 'wait timer' is so short that it'll default-boot into the latest kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Menu will appear if you press and hold &lt;kbd&gt;Shift&lt;/kbd&gt; during loading Grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get GRUB menu permanentaly  you need to customize the &lt;code&gt;/etc/default/grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;change settings  &lt;strong&gt;GRUB_TIMEOUT=10&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and place a &quot;#&quot; symbol at the start of line GRUB_HIDDEN_TIMEOUT=0`&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save changes and run &lt;code&gt;sudo update-grub&lt;/code&gt; to apply changes&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;blockquote&gt;&#xA;  &lt;p&gt;Will GRUB show up once there's a kernel update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;No&lt;/strong&gt; .Kernel update never trigger grub to show menu at boot time, unless you do something to &lt;code&gt;/etc/default/grub&lt;/code&gt; before and forgot to run &lt;code&gt;sudo update-grub&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also whenever kernels are updated, grub push the old kernels back to advanced options and keep new kernel as default main entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;reference &lt;a href=&quot;https://help.ubuntu.com/community/Grub2&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-27T16:08:49.380" LastActivityDate="2015-10-27T16:08:49.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2676" PostTypeId="1" CreationDate="2015-10-23T14:55:29.477" Score="1" ViewCount="172" Body="&lt;p&gt;I guess my elementary OS system is crash. =( After boot up, log in page background is blank. After key in password, it is a infinite loop of log in page, unable to log into desktop. Any help please? Don't wish to re-install system, as that was my first time to dual boot elementary OS/Linux, would like to keep it hassle free.&lt;/p&gt;&#xA;" OwnerUserId="2865" LastEditorUserId="34" LastEditDate="2015-11-19T13:25:16.540" LastActivityDate="2015-11-19T13:25:16.540" Title="Infinite log in loop" Tags="|greeter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2677" PostTypeId="1" CreationDate="2015-10-23T15:03:52.133" Score="4" ViewCount="3187" Body="&lt;p&gt;I try to install global menu on my elementary OS from this tutorial &lt;a href=&quot;https://launchpad.net/~varlesh-l/+archive/ubuntu/test&quot; rel=&quot;nofollow noreferrer&quot;&gt;This tutorial&lt;/a&gt; from Reddit and due to unmet dependencies I run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;INSTALL:&#xA;sudo add-apt-repository ppa:varlesh-l/test&#xA;sudo apt-get update&#xA;sudo apt-get install --reinstall wingpanel indicator-appmenu&#xA;gsettings set org.pantheon.desktop.wingpanel blacklist &quot;['']&quot;&#xA;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But I didn't liked it so I ran the uninstaller:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge wingpanel indicator-appmenu&#xA;sudo add-apt-repository -r ppa:varlesh-l/test&#xA;sudo apt-get update&#xA;sudo apt-get install --reinstall pantheon-shell wingpanel&#xA;gsettings set org.pantheon.desktop.wingpanel blacklist &quot;['libappmenu.so']&quot;&#xA;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I don't know what happened and I rebooted my PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a result now I am not able to use elementary OS. Every time I start elementary OS it shows the login screen but after logging in nothing changes, it just continues to show the wallpaper from the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I get to the login screen and proceed with &lt;code&gt;Alt+Ctrl+F1&lt;/code&gt; to the terminal. I have tried some steps and but none of them worked :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I'm totally stuck. Last night I tried reinstalling lightdm again and run &lt;code&gt;service lightdm restart&lt;/code&gt; but nothing happend, tried &lt;a href=&quot;https://askubuntu.com/questions/563562/how-do-i-restore-missing-launchbar-and-menubar-in-unity/564333#564333&quot;&gt;this tutorioal&lt;/a&gt;&#xA;and got this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; dconf-warning: failed to commit changes to dconf: Cannot autolaunch D-BUS without x11 $DISPLAY&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am using it with Windows 10 dual boot. I don't want to reinstall my elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got access from my windows to &lt;code&gt;.xsession-errors&lt;/code&gt; and &lt;code&gt;.xsession-errors.old&lt;/code&gt; with help from this &lt;a href=&quot;https://gist.github.com/Revod/cad3bc11f4d245d20d84&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the log folder (through my windows) and looked at &lt;code&gt;x-0-greeter.log&lt;/code&gt; &lt;a href=&quot;https://gist.github.com/Revod/b17e831653f269e22705&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I think this is the critical error)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here my &lt;code&gt;Xorg.0.log&lt;/code&gt; &lt;a href=&quot;https://gist.github.com/Revod/f8c31fefb12ea5c37131&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and my lightdm.log &lt;a href=&quot;https://gist.github.com/Revod/1858c35bf059da9865a5&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already tried some posts here with about the same issue, but mien couldn't be solved that way.&lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="17846" LastEditDate="2019-05-21T13:34:46.577" LastActivityDate="2019-05-21T13:34:46.577" Title="Repair the elementary OS Login" Tags="|wingpanel|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="2678" PostTypeId="1" CreationDate="2015-10-23T15:33:01.023" Score="2" ViewCount="365" Body="&lt;p&gt;So I updated my computer last night, and restarted it and was stuck on a black screen. After waiting about 15 minutes and restarting my computer a couple of times, I finally unplugged it, hoping to solve it in the morning. By booting in recovery mode for the latest update the best I could see on the screen is in the photo I posted below.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/bY0Qk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bY0Qk.jpg&quot; alt=&quot;Elementary IO Boot Failed&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally I got my system up-and-running again, but in a previous variant of Elementary IO. And every time I start my computer I now have to go through this screen.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/dHo0o.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dHo0o.jpg&quot; alt=&quot;Elementary IO Recover Doesn&amp;#39;t Work&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I in recover mode, it said that my graphic drivers might not be supported. I had a major issue with graphic drivers when I first installed the OS. I feel like this is something that needs to be fixed in another update of Elementary IO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did anyone else have issues like this with the latest update?&#xA;Does anyone have a solution that might prevent this from happening again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Specs) MoBo: Asrock Z87-M8| CPU: i5-4570S| GPU: GTX 750 Ti&lt;/p&gt;&#xA;" OwnerUserId="2665" LastActivityDate="2016-01-20T03:15:11.363" Title="Latest update doesn't boot on my computer" Tags="|release-freya|boot|graphic-drivers|updates|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2680" PostTypeId="1" AcceptedAnswerId="2690" CreationDate="2015-10-23T21:58:05.263" Score="18" ViewCount="117549" Body="&lt;p&gt;The Desktop plug in settings only lets you choose between two icon sizes and the hide behavior. I would like to be able to change the settings with more control than that. Is there a simple way to do this?&lt;/p&gt;&#xA;" OwnerUserId="120" LastActivityDate="2019-02-21T20:05:14.147" Title="How can I customise plank?" Tags="|plank|settings|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2681" PostTypeId="2" ParentId="2680" CreationDate="2015-10-23T21:58:05.263" Score="7" Body="&lt;p&gt;It is quite easy to fine-tune the settings of Plank.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to &lt;code&gt;~/.config/plank/dock&lt;/code&gt; and open the &lt;code&gt;settings&lt;/code&gt; file in your preferred text editor. You can view hidden folders by pressing &lt;code&gt;Ctrl+H&lt;/code&gt;.&lt;br&gt;&#xA;Scroll down to near the end of the file, and change the line that &lt;code&gt;ShowDockItem=false&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the Plank icon that will appear on the left, and you will see the settings dialog:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Uwcag.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Uwcag.png&quot; alt=&quot;Plank settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="120" LastActivityDate="2015-10-23T21:58:05.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2682" PostTypeId="1" CreationDate="2015-10-24T01:03:13.817" Score="1" ViewCount="144" Body="&lt;p&gt;Fresh install of elementary OS, if using mouse keyboard to interact no issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I move away from computer so, no interaction is happening, freya freezes and freezes in the sense that it doesn't even let me use mouse , keyboard or&lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; / &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Same machine when running Ubuntu in similar situations had no such issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could anyone help me or point me in right direction please?&lt;/p&gt;&#xA;" OwnerUserId="2869" LastEditorUserId="3757" LastEditDate="2016-04-20T07:30:40.437" LastActivityDate="2016-04-20T07:30:40.437" Title="elementary OS Freya: Complete freeze including ctrl+f1/f2/f3/f4 etc" Tags="|release-freya|" AnswerCount="0" CommentCount="0" ClosedDate="2019-12-08T04:20:05.747" ContentLicense="CC BY-SA 3.0" />
  <row Id="2683" PostTypeId="2" ParentId="2678" CreationDate="2015-10-24T03:40:25.457" Score="1" Body="&lt;p&gt;Do you have any USB devices plugged into your computer when you booted? If you do, pull &lt;strong&gt;ALL&lt;/strong&gt; of them out and try rebooting.&lt;/p&gt;&#xA;&lt;p&gt;Elementary is based of of the Ubuntu kernel. Graphics support for Intel 4600 was added in the &lt;a href=&quot;https://askubuntu.com/questions/310341/do-graphics-drivers-for-intel-hd-4600-exist&quot;&gt;13.04&lt;/a&gt; version of the kernel. What elementary were you getting the USB error in, and which version did you restore back to?&lt;/p&gt;&#xA;&lt;p&gt;You may want to try installing from the latest iso file from the elementary website &lt;a href=&quot;http://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Post back if it installs error free, or if you get similar errors.&lt;/p&gt;&#xA;&lt;p&gt;The second picture you posted is of GRUB, the GRand Unified Bootloader. This is the software that actually loads the operating system. If you had other operating systems, then they would show up in that menu.&lt;/p&gt;&#xA;&lt;p&gt;If you would like to hide the menu, boot into your install, open a terminal window, and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then set the GRUB_TIMEOUT and GRUB_HIDDEN_TIMEOUT lines to 0.&#xA;Afterwards, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Cheers,&#xA;~Kisa&lt;/p&gt;&#xA;" OwnerUserId="2871" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-10-24T03:40:25.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2684" PostTypeId="1" AcceptedAnswerId="2685" CreationDate="2015-10-24T08:08:59.510" Score="5" ViewCount="294" Body="&lt;p&gt;I was able to do this just fine in the previous version of elementary OS. But I've been unable to find a method to do it in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+Tto duplicate a tab in Freya with the same directory. So if the current tab is in &lt;code&gt;~/Workspace/Websites&lt;/code&gt; I can just press the key sequence and it'll open a second tab in &lt;code&gt;~/Workspace/Websites&lt;/code&gt; as well instead of having to right click on the tab and clicking &lt;strong&gt;duplicate&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2872" LastEditorUserId="3757" LastEditDate="2016-05-07T03:56:48.033" LastActivityDate="2016-05-07T03:56:48.033" Title="How do you have Ctrl + Alt + T duplicate a terminal tab in Freya?" Tags="|release-freya|pantheon-terminal|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2685" PostTypeId="2" ParentId="2684" CreationDate="2015-10-24T10:46:51.163" Score="9" Body="&lt;p&gt;just set &lt;code&gt;org.pantheon.terminal.settings.follow-last-tab&lt;/code&gt; in dconf to true.&lt;br&gt;&#xA;Or you can execute in terminal:&lt;br&gt;&#xA;&lt;code&gt;gsettings set org.pantheon.terminal.settings follow-last-tab true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-10-24T10:46:51.163" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2686" PostTypeId="1" AcceptedAnswerId="3056" CreationDate="2015-10-24T15:59:38.540" Score="2" ViewCount="380" Body="&lt;p&gt;The message says: &quot;Unable to import 2002 items from /home/santiago/Music&#xA;Music was unable to import 2002 items. The files may be damaged.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It imports some files but the rest it doesn't, the files are not corrupt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have elementary OS in a partition in my SSD along side Windows 10 in another partition. I use a 1TB NTFS hard disk for my files. &lt;/p&gt;&#xA;" OwnerUserId="2875" LastEditorUserId="34" LastEditDate="2015-11-19T13:25:25.567" LastActivityDate="2015-11-22T23:13:32.953" Title="Noise won't import my music from my NTFS partition!" Tags="|music|import|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2687" PostTypeId="2" ParentId="2678" CreationDate="2015-10-24T20:13:03.707" Score="1" Body="&lt;p&gt;I have a similar problem 2 weeks ago...&#xA;Just enter &quot;recovery mode&quot; and choose &quot;Repair dpkg files&quot; and &quot;Check files system&quot; and then restart.&#xA;I hope it helps! &lt;/p&gt;&#xA;" OwnerUserId="2878" LastActivityDate="2015-10-24T20:13:03.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2689" PostTypeId="1" CreationDate="2015-10-24T20:20:29.113" Score="0" ViewCount="912" Body="&lt;p&gt;I recently installed elementary OS on a toshiba chromebook 2 using this guide:&#xA;&lt;a href=&quot;https://github.com/brendenyule/NativeToshibaCB2Guide/wiki&quot; rel=&quot;nofollow&quot;&gt;https://github.com/brendenyule/NativeToshibaCB2Guide/wiki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works great except for the sound. I hear nothing. I have tried what seems like every guide to troubleshoot this and still can not get it to make a sound. I have installed drivers and gotten it to display a dummy output, which is working as it is correct with the sound my computer should be making. No sound though. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;important information:&#xA;At the end of the guide it has you install drivers i assume to get the touchpad working. It feels like a similar issue but i there are none on the guide for audio.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update has these fails, which seem rather important for my audio problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch http://ppa.launchpad.net/ubuntu-audio-dev/ppa/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;(It wont let me post more hyperlinks for some reason so )&#xA;&#xA;W: Failed to fetch   404  Not Found(another audio.dev thing)&#xA;&#xA;W: Failed to fetch   404  Not Found(elementary update binary 64 stuff)&#xA;&#xA;W: Failed to fetch   404  Not Found(elementary update binary i386 stuff)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also alsamixer&#xA;alsamixer&#xA;cannot open mixer: No such file or directory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsa&#xA;Usage: /sbin/alsa {unload|reload|force-unload|force-reload|suspend|resume}&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsa reload etc. did not work. Ive been at this trying to fix it all kinds of ways, including many clean usb boot installs for well over 10 hours in the past two days. Please let me know what i need to do or try to get this  audio working on this beautiful machine.&lt;/p&gt;&#xA;" OwnerUserId="2879" LastEditorUserId="3757" LastEditDate="2016-05-07T04:20:40.950" LastActivityDate="2016-05-07T04:21:02.123" Title="no audio help please" Tags="|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2690" PostTypeId="2" ParentId="2680" CreationDate="2015-10-24T21:29:19.973" Score="36" Body="&lt;p&gt;Plank has a hidden settings window for developers/OEMs.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold down &lt;kbd&gt;Control&lt;/kbd&gt; and right click anywhere on the dock&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;li&gt;Go nuts&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Please be aware that some of these options will lead to less-than-optimal experiences. For example, setting the dock to the Top position will make it impossible to unhide in certain situations as well as cover the time, etc. Some of these features are not completely implemented or don't fully work with other parts of the desktop environment or with certain hardware.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-24T21:29:19.973" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2691" PostTypeId="1" CreationDate="2015-10-24T22:00:32.643" Score="2" ViewCount="58" Body="&lt;p&gt;Coming from Gnome3, I'm used to being able to open the keyboard settings tool (gnome-control-center keyboard) by pressing the &quot;Super&quot; (on PC: the Windows key) key and typing &quot;keyboard&quot;. The keyboard settings tool resides in the &quot;Settings&quot; group and can thus be regarded as a sub item to &quot;Settings&quot;, but I discovered that Slingshot only finds top-level items such as &quot;Settings&quot; but not the sub items (eg. keyboard settings).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The semantics of this behavior can be seen as &quot;I (slingshot) doesn't know anything about keyboards&quot; or &quot;This OS does not have a tool for managing the keyboard&quot;, which of course is false :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(As a side note - it is consistent with the behavior in OSX, but that doesn't mean that it's &quot;done right&quot; - I was just as stumbled to find out that I can't search for the keyboard settings in OSX either)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug, or is it intentional?&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2015-10-25T20:45:29.617" Title="Slingshot doesn't find sub items" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-27T18:48:30.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="2692" PostTypeId="2" ParentId="2101" CreationDate="2015-10-24T22:57:43.163" Score="1" Body="&lt;p&gt;I am doing the exact same thing as you running the cb2 and doing the native install for elementary OS with seaBIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also can not get my audio to work no matter what troubleshooting i do. You can try the troubleshooting procedures such as the one below, but be careful with just throwing commands in the terminal. The one in the link below has a big block of terminal commands that will install a ton of bloatware and the unity greeter- so dont run that command. But here is the link if you can get luck with it, let me know.&#xA;&lt;a href=&quot;http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/&quot; rel=&quot;nofollow&quot;&gt;http://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2880" LastActivityDate="2015-10-24T22:57:43.163" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2693" PostTypeId="2" ParentId="2673" CreationDate="2015-10-25T02:25:35.753" Score="2" Body="&lt;p&gt;This is 100% normal behavior since your computer only has one operating system. If you would like to show the GRUB menu during boot, type the following command into your terminal. This command will open up the &lt;code&gt;/etc/default/grub&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you type in your administrator password and the text document opens, place a &lt;code&gt;#&lt;/code&gt; symbol before the text &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#GRUB_HIDDEN_TIMEOUT=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you are done, open up terminal and type in &lt;code&gt;sudo update-grub&lt;/code&gt;, and reboot.&lt;/p&gt;&#xA;" OwnerUserId="2882" LastEditorUserId="2882" LastEditDate="2015-10-25T02:31:22.343" LastActivityDate="2015-10-25T02:31:22.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2694" PostTypeId="1" CreationDate="2015-10-25T02:25:38.743" Score="1" ViewCount="1006" Body="&lt;p&gt;I'm running elementary OS Freya on a HP Notebook.&#xA;I downloaded the game &quot;Faster than Light&quot; and the launcher is a shellscript. Even with the &lt;code&gt;+x&lt;/code&gt; permssion I get &lt;code&gt;&quot;permission denied&quot;&lt;/code&gt; messages. I don't know how to solve this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the complete output&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ola@piteco-elementaryos:~/tralhas/jogos/FTL$ ls -l&#xA;total 20&#xA;drwxrwxr-x 6 ola ola  4096 Abr 20  2013 data&#xA;-rwxrwxr-x 1 ola ola    74 Abr 20  2013 FTL&#xA;-rw-rw-r-- 1 ola ola 12225 Abr 20  2013 FTL_README.html&#xA;ola@piteco-elementaryos:~/tralhas/jogos/FTL$ ./FTL&#xA;bash: ./FTL: Permission denied&#xA;ola@piteco-elementaryos:~/tralhas/jogos/FTL$ sudo su&#xA;root@piteco-elementaryos:/home/ola/tralhas/jogos/FTL# ./FTL&#xA;bash: ./FTL: Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The tralhas filesystem is mounted with exec option:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ola@piteco-elementaryos:~$ grep &quot;tralhas&quot; /etc/fstab&#xA;#HD tralhas&#xA;/dev/sda4 /home/ola/tralhas ext4 auto,exec,rw,user 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help wih this situation :D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT]&#xA;Just copied the folder into my home folder and the script runned just fine:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ola@piteco-elementaryos:~/FTL$ ./FTL &#xA;Loading Arch = amd64&#xA;No settings file found! &#xA;Initializing Crash Catcher...&#xA;Initializing Video&#xA;Video Initialized&#xA;Opengl version = 4.4.13374 Compatibility Profile Context 15.20.1013&#xA;Starting audio library...&#xA;Audio Initialized!&#xA;Resource Preload: 19.284&#xA;Loading text....&#xA;Initializing animations...&#xA;Animations Initialized!&#xA;Loading Ship Blueprints....&#xA;Blueprints Loaded!&#xA;Initializing Sound Data....&#xA;Generating world...&#xA;Loading achievements...&#xA;Loading score file...&#xA;Running Game!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Yet I can't run the one at the &lt;code&gt;tralhas&lt;/code&gt; filesystem.&lt;/p&gt;&#xA;" OwnerUserId="2883" LastEditorUserId="34" LastEditDate="2015-12-14T17:29:39.333" LastActivityDate="2015-12-14T17:29:39.333" Title="Can't execute shell scripts" Tags="|pantheon-terminal|bash|shell|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2695" PostTypeId="2" ParentId="2689" CreationDate="2015-10-25T02:58:34.320" Score="1" Body="&lt;p&gt;Open a terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:ubuntu-audio-dev/ppa&#xA;sudo apt-get update&#xA;sudo add-apt-repository ppa:ubuntu-audio-dev/pulse-testing&#xA;sudo apt-get update&#xA;sudo apt-get install pulseaudio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="3757" LastEditDate="2016-05-07T04:21:02.123" LastActivityDate="2016-05-07T04:21:02.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2696" PostTypeId="2" ParentId="2405" CreationDate="2015-10-25T04:06:26.013" Score="1" Body="&lt;p&gt;&lt;strong&gt;Banshee&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Banshee_(media_player)&quot; rel=&quot;nofollow noreferrer&quot;&gt;Banshee&lt;/a&gt; is an open-source media player. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is available in elementary OS (freya) &lt;strong&gt;Software Center&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install by using the command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install banshee&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uD3Uh.jpg&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-17T14:50:04.707" LastActivityDate="2015-11-17T14:50:04.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2697" PostTypeId="1" CreationDate="2015-10-25T09:34:26.730" Score="1" ViewCount="92" Body="&lt;p&gt;When im trying to make a screenshot with the standard screenshot utility on elementary OS (Version: 0.2.1 &quot;Luna&quot; ( 32-bit )) the window flashes and the picture saved is just my desktop background (or the area I grabbed) and not the window I wanted to screenshot. I already tried rebooting etc. Any ideas?&lt;/p&gt;&#xA;" OwnerDisplayName="user2885" LastActivityDate="2015-10-25T16:50:09.663" Title="Screenshot utility does not work" Tags="|luna|screenshot|" AnswerCount="1" CommentCount="0" ClosedDate="2015-10-25T16:50:30.863" ContentLicense="CC BY-SA 3.0" />
  <row Id="2698" PostTypeId="1" AcceptedAnswerId="2700" CreationDate="2015-10-25T10:17:33.500" Score="1" ViewCount="486" Body="&lt;p&gt;I've installed the clipboard manager diodon, a status panel applet I've used before with Ubuntu that works very well. The only annoyance is that in elementary it doesn't use a monochrome icon, but rather the default, colored icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found some &lt;a href=&quot;https://esite.ch/2014/07/where-is-my-diodon-monochrome-icon/&quot; rel=&quot;nofollow&quot;&gt;instructions&lt;/a&gt; for changing the icon manually which basically included copying the icon from &lt;code&gt;/usr/share/icons/ubuntu-mono-dark/status/22&lt;/code&gt; to my own theme's icon folder. Since elementary didn't appear to have 22px resolution icons, I copied from and to the 24 folders instead. But this didn't have any effect, the panel applet icon is still the same as before, even after having run &lt;code&gt;sudo gtk-update-icon-cache /usr/share/icons/elementary/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong here?&lt;/p&gt;&#xA;" OwnerUserId="2886" LastActivityDate="2015-10-25T11:14:24.587" Title="Copying status panel icon for diodon" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2700" PostTypeId="2" ParentId="2698" CreationDate="2015-10-25T11:14:24.587" Score="2" Body="&lt;p&gt;I don't know why it didn't work, but I'd suggest you try &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary+&lt;/a&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary+ is a community maintained addition to elementary OS's&#xA;  default icon theme. It contains icons for several third party&#xA;  applications that resemble elementary OS's style.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;While it may not have many application icons, this theme contains almost every indicator icon: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CHCKk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CHCKk.png&quot; alt=&quot;indicator icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cpGDZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cpGDZ.png&quot; alt=&quot;application icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2015-10-25T11:14:24.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2702" PostTypeId="1" AcceptedAnswerId="2703" CreationDate="2015-10-25T12:15:10.367" Score="1" ViewCount="821" Body="&lt;pre&gt;&lt;code&gt;mr2uang@mr2uang-MS-7798:~$ google-chrome Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;[7832:7832:1025/191444:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[7832:7832:1025/191444:ERROR:browser_main_loop.cc(223)] GTK themeerror: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[7832:7832:1025/191444:ERROR:browser_main_loop.cc(223)] GTK themeerror: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[7832:7832:1025/191444:ERROR:browser_main_loop.cc(223)] GTK themeerror: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[7832:7832:1025/191444:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot; Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can i fix them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After execting the following commands: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk-module:i386 &#xA;sudo apt-get install libcanberra-gtk* &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mr2uang@mr2uang-MS-7798:~$ google-chrome &#xA;Inconsistency detected by ld.so: ../sysdeps/x86_64/dl-machine.h: 492:elf_machine_rela_relative: Assertion((reloc-&amp;gt;r_info) &amp;amp; 0xffffffff) == 8' failed!`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="2708" LastEditDate="2015-10-25T14:25:27.163" LastActivityDate="2015-10-25T14:32:40.323" Title="Can't open google-chrome stable newest" Tags="|google-chrome|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2703" PostTypeId="2" ParentId="2702" CreationDate="2015-10-25T13:59:04.243" Score="1" Body="&lt;p&gt;In the question the main error message (but very minor,nothing to do with opening chrome) is&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot; Segmentation fault (core dumped)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk-module&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If still getting error &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk-module:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I too get the rest of the messages in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ google-chrome&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;[2889:2889:1025/192524:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2889:2889:1025/192524:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2889:2889:1025/192524:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2889:2889:1025/192524:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[2889:2889:1025/192524:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Created new window in existing browser session.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If still not working try to reinstall google-chrome-stable&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get purge google-chrome-stable&#xA; rm ~/.config/google-chrome/ -rf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(The first command removes the package and second command removes custom settings )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The new error &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Inconsistency detected by ld.so: ../sysdeps/x86_64/dl-machine.h:492:elf_machine_rela_relative: Assertion((reloc-&gt;r_info) &amp;amp; 0xffffffff) == 8' failed!&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It is just a disk or memory corruption issue.If it is &lt;em&gt;memory&lt;/em&gt; ,  &lt;strong&gt;reboot&lt;/strong&gt; should clear.If it is disk, then &lt;strong&gt;reinstalling&lt;/strong&gt; the affected package should fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install chrome-stable from &lt;a href=&quot;https://www.google.com/intl/en-US/chrome/browser/desktop/index.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-25T14:32:40.323" LastActivityDate="2015-10-25T14:32:40.323" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2704" PostTypeId="1" CreationDate="2015-10-25T15:25:07.393" Score="1" ViewCount="1350" Body="&lt;p&gt;I have two languages are Vietnamese and English.&lt;br&gt;&#xA;My Shortcut is Alt+Space for change language layout.&lt;br&gt;&#xA;How can i add icon which language i'm using to System Tray?&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="160" LastEditDate="2015-10-25T19:21:31.497" LastActivityDate="2020-12-26T14:06:48.410" Title="How to add icon Keyboard layout to System Tray" Tags="|release-freya|keyboard|wingpanel|keyboard-layout|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2705" PostTypeId="2" ParentId="2697" CreationDate="2015-10-25T16:50:09.663" Score="1" Body="&lt;p&gt;This community is the wrong place for reporting issues, sorry. If you want to report an issue with the developers, you can do that as described in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How can I report an issue with elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, elementary OS Luna is not actively developed anymore. While the operating system is still secure (as the Ubuntu base still delivers security updates), there are very few elementary OS developers still working on delivering bug fixes and updates for elementary OS software on Luna. Therefore, reporting this issue will most likely not result in any fix.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-25T16:50:09.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2706" PostTypeId="1" CreationDate="2015-10-25T17:12:27.967" Score="7" ViewCount="7605" Body="&lt;p&gt;I cannot shutdown my elementary OS in my ASUS G56JR Notebook.&#xA;I am trying other solutions I have found here in StackExchange but no changes, I am using actual version LTS of elementary OS Freya.&lt;/p&gt;&#xA;" OwnerUserId="2892" LastEditorUserId="3757" LastEditDate="2016-05-06T14:35:38.623" LastActivityDate="2016-09-11T23:44:49.800" Title="Cannot Shutdown or Reboot elementary OS" Tags="|shutdown|asus|" AnswerCount="3" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2707" PostTypeId="1" CreationDate="2015-10-25T17:34:40.063" Score="7" ViewCount="2194" Body="&lt;p&gt;I had installed beta version of Freya alongside windows 7 about a year ago. I didn't use or update Freya after a month of use. But today I updated it by &lt;code&gt;apt-get update&lt;/code&gt; &amp;amp;&amp;amp; &lt;code&gt;apt-get upgrade&lt;/code&gt; and also from software updater. Now, after that process, software center does not open by clicking the icon. All other apps work normally. Any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: When I open it from terminal, it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (software-center:9741): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-wwFmjNgyPS: Connection refused&#xA;2015-10-25 23:09:13,460 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None'&#xA;Traceback (most recent call last):&#xA;File &quot;/usr/bin/software-center&quot;, line 130, in &amp;lt;module&amp;gt;&#xA;app = SoftwareCenterAppGtk3(options, args)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 407, in __init__&#xA;self.icons)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 79, in __init__&#xA;self._get_emblems(self.icons)&#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 199, in _get_emblems&#xA;pb = icons.load_icon(emblem, self.ICON_SIZE, 0)&#xA;gi._glib.GError: Error opening file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2894" LastEditorUserId="2708" LastEditDate="2015-10-25T17:55:22.250" LastActivityDate="2015-12-25T00:49:06.107" Title="Software center does not open after update" Tags="|release-freya|appcenter|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2708" PostTypeId="2" ParentId="2707" CreationDate="2015-10-25T18:06:30.727" Score="2" Body="&lt;p&gt;Removing Software Centre's cache could help:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall software-center&#xA;sudo rm -r /var/cache/software-center/xapian&#xA;sudo mv /var/lib/dpkg/info/format /var/lib/dpkg/info/format.bak&#xA;sudo dpkg --clear-avail&#xA;sudo apt-get update&#xA;sudo apt-get install --reinstall software-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The first command should return &lt;code&gt;software-center: no process found&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the comment by OP, The problem solved after re-installing both the themes.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall humanity-icon-theme elementary-icon-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-25T00:49:06.107" LastActivityDate="2015-12-25T00:49:06.107" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2709" PostTypeId="2" ParentId="2704" CreationDate="2015-10-25T19:20:17.993" Score="2" Body="&lt;p&gt;Keyboard indicator appears after add two or more layouts in keyboard settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fx0HR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fx0HR.png&quot; alt=&quot;keyboard layout settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-25T19:20:17.993" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2710" PostTypeId="1" AcceptedAnswerId="2711" CreationDate="2015-10-25T19:42:25.877" Score="6" ViewCount="1335" Body="&lt;p&gt;I just installed the elementary-tweaks package on Freya, and was wondering if there was a way to control the &lt;strong&gt;Prefer Dark Theme&lt;/strong&gt; option programmatically with a script, or directly via the terminal. I am quite new to elementary OS and Linux in general so I don't really have much experience with such tasks. If someone could point me in the right direction, it would be much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am referring to this &lt;strong&gt;Prefer Dark Theme&lt;/strong&gt; toggle option:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Mh8Sy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mh8Sy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2895" LastEditorUserId="3757" LastEditDate="2016-04-24T06:17:21.347" LastActivityDate="2016-04-24T06:17:21.347" Title="Elementary Tweaks - How can I Toggle &quot;Prefer Dark Theme&quot; via Terminal?" Tags="|settings|pantheon-terminal|themes|command-line|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2711" PostTypeId="2" ParentId="2710" CreationDate="2015-10-25T20:33:18.633" Score="5" Body="&lt;p&gt;I don't think there is an command for this, but you can edit a file.&#xA;Create/edit the following file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.config/gtk-3.0/settings.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And change it to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Settings]&#xA;gtk-application-prefer-dark-theme=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="3757" LastEditDate="2016-04-24T06:16:38.030" LastActivityDate="2016-04-24T06:16:38.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2712" PostTypeId="2" ParentId="2691" CreationDate="2015-10-25T20:37:36.600" Score="1" Body="&lt;p&gt;Slingshot accually does show subitems. If you search for &quot;Keyboard&quot; it will show it on the bottom:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PL5NH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PL5NH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Same goes for all the other plugs of Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thing to note: this feature only has been added a while ago, you might want to update your system.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2629" LastEditDate="2015-10-25T20:45:29.617" LastActivityDate="2015-10-25T20:45:29.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2713" PostTypeId="1" CreationDate="2015-10-25T21:39:25.163" Score="1" ViewCount="667" Body="&lt;p&gt;I upgraded elementary OS to 0.3 and the wired connection is not working anymore. When I first installed elementary OS, I had to follow &lt;a href=&quot;https://unixblogger.wordpress.com/2011/10/18/the-pain-of-an-realtek-rtl8111rtl8168-ethernet-card/&quot; rel=&quot;nofollow&quot;&gt;these steps&lt;/a&gt;. But I noticed that the ethernet is not even listed in ifconfig. I came across &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=1914065&quot; rel=&quot;nofollow&quot;&gt;this thread&lt;/a&gt; but it seems old and I am not sure if it would apply for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the output for the commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ifconfig -a&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lo        Link encap:Local Loopback  &#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:892 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:892 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:0 &#xA;          RX bytes:147573 (147.5 KB)  TX bytes:147573 (147.5 KB)&#xA;&#xA;wlan1     Link encap:Ethernet  HWaddr 68:1c:a2:05:01:73  &#xA;          inet addr:192.168.29.242  Bcast:192.168.29.255  Mask:255.255.255.0&#xA;          inet6 addr: fe80::6a1c:a2ff:fe05:173/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:3098 errors:0 dropped:478 overruns:0 frame:0&#xA;          TX packets:3117 errors:0 dropped:1 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:2462937 (2.4 MB)  TX bytes:730402 (730.4 KB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;lshw -c NET&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: you should run this program as super-user.&#xA;  *-network UNCLAIMED     &#xA;       description: Ethernet controller&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       version: 0c&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list&#xA;       configuration: latency=0&#xA;       resources: ioport:d000(size=256) memory:fe800000-fe800fff memory:d0900000-d0903fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       physical id: 1&#xA;       bus info: usb@8:1.3&#xA;       logical name: wlan1&#xA;       serial: 68:1c:a2:05:01:73&#xA;       capabilities: ethernet physical wireless&#xA;       configuration: broadcast=yes driver=r8712u ip=192.168.29.242 multicast=yes wireless=IEEE 802.11bgn&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="534" LastActivityDate="2015-10-25T21:39:25.163" Title="Wired connection not working after update. Ethernet not listed in ifconfig" Tags="|networking|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2715" PostTypeId="1" CreationDate="2015-10-26T02:46:35.677" Score="2" ViewCount="235" Body="&lt;p&gt;After reading a post &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2680/how-can-i-customise-plank/2690#2690&quot;&gt;here&lt;/a&gt; by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/45/daniel-for%C3%A9?tab=profile&quot;&gt;Daniel Foré&lt;/a&gt;, I am just curious to know the &lt;em&gt;hidden&lt;/em&gt; settings/features in elementary OS (freya) ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any documentation available for these hidden features in freya?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-26T02:46:35.677" Title="What are hidden settings/features available in elementary OS freya" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-28T19:00:09.823" ContentLicense="CC BY-SA 3.0" />
  <row Id="2716" PostTypeId="1" CreationDate="2015-10-26T03:51:35.437" Score="3" ViewCount="29044" Body="&lt;p&gt;after installing Elementary OS , reboot my laptop ( To start running the operating system supposedly) and I get a black screen with this message:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;[ Minimal BASH -like line editing is supported. for the first word ,&#xA;  TAB lists possible command completions . Anywhere else TAB lists the&#xA;  possible completions of a device / filename . ]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Actually I am a rookie , but I'm sure I did everything right . In fact , I could successfully install and run Ubuntu .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really hope your help,&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="2897" LastActivityDate="2016-09-09T21:42:25.130" Title="Error in grub [ Minimal BASH-like line editing is supported. For" Tags="|system-installation|software-installation|system|grub|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-19T00:09:22.910" ContentLicense="CC BY-SA 3.0" />
  <row Id="2717" PostTypeId="2" ParentId="2716" CreationDate="2015-10-26T04:36:35.077" Score="2" Body="&lt;p&gt;To solve this problem  use this &lt;a href=&quot;https://askubuntu.com/questions/88384/how-can-i-repair-grub-how-to-get-ubuntu-back-after-installing-windows&quot;&gt;thread&lt;/a&gt;,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot from live USB&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Identify the partition of elementary OS&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Replace &lt;code&gt;sda2&lt;/code&gt; with your partition )&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount /dev/sda2 /mnt&#xA;for i in /sys /proc /run /dev; do sudo mount --bind &quot;$i&quot; &quot;/mnt$i&quot;; done&#xA;sudo chroot /mnt&#xA;update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you got errors then (this is optional):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub-install /dev/sda&#xA;update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally ;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exit&#xA;sudo reboot  &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Alternatively:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Either from an Ubuntu live-session  or from your installed Ubuntu session (if you can access it)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;reference &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-10-26T05:00:41.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2718" PostTypeId="1" CreationDate="2015-10-26T07:39:31.203" Score="1" ViewCount="155" Body="&lt;p&gt;Freya has it's quirks but for the most parts very pretty and works quite well. Recently however, I've decided to download some games to play on my desktop, and it has this peculiar behaviour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the record, I've only downloaded and attempted to play 3 games, listed below&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Euro Truck Simulator 2&lt;/li&gt;&#xA;&lt;li&gt;The Settlers Online (Doesn't work*)&lt;/li&gt;&#xA;&lt;li&gt;Prison Architect&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Upon starting these games, it runs relatively smooth and have no problems. However, this is short lived. It runs for anywhere between 3-15 minutes before the system crash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will play normally and out of nowhere, flash a black screen where it'll stay for a couple seconds before the illuminating nice Freya logo shows up, then the system just shuts off. When starting the system up again, no errors pop up and I can run the games again, and it will shut itself down again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read somewhere it may have something to do with Nvidia and Linux not working to well. I can't really understand much, I'm very new to the world of Linux.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;*It doesn't work because of it being a 64-bit system and the game requires the 32-bit version of flash or something. Have yet to try and&#xA;  fix it.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to do as @Jeroen suggested by changing drivers to Nvidia's proprietary drivers, and that has resulted in Steam not even starting up. A quick search has suggested that I try to switch to non-proprietary drivers, then Steam will be able to start, then I just need to switch back. However, that does not seem to work. Maybe I'm selecting the wrong driver? This is a picture of the driver list, I have no idea how to screenshot on Elementary, this does just fine for now, was in a hurry. Hehe..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sZmxL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sZmxL.jpg&quot; alt=&quot;List of drivers&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2648" LastEditorUserId="2648" LastEditDate="2015-11-01T02:20:55.690" LastActivityDate="2015-11-01T02:20:55.690" Title="Freya crashes when gaming" Tags="|system|graphic-drivers|games|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2719" PostTypeId="1" CreationDate="2015-10-26T13:40:18.860" Score="0" ViewCount="602" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/DFInt.png&quot; alt=&quot;This is my picture&quot;&gt;&lt;br&gt;&#xA;As you can see i have two diffrent gnome control centers.&lt;br&gt;&#xA;The left is default , open from application.&lt;br&gt;&#xA;The right was opened by Ternimal &lt;code&gt;gnome-control-center&lt;/code&gt;.&lt;br&gt;&#xA;The left can't open Keyboard&lt;br&gt;&#xA;The right doesn't have it ,but can open keyboard by &lt;code&gt;gksu gnome-control-center&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My linux distro is elementary os Freya&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="45" LastEditDate="2015-10-26T23:14:13.070" LastActivityDate="2015-10-26T23:14:13.070" Title="Some plugs are failing to open in Switchboard" Tags="|settings|keyboard|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="2721" PostTypeId="1" CreationDate="2015-10-26T14:08:53.620" Score="1" ViewCount="1393" Body="&lt;p&gt;I tried changing the background wallpaper in greeter following the top answer from this question: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/81/how-do-i-change-login-background-in-elementary-os-freya/85#85&quot;&gt;How do I change login background in elementary OS Freya or Loki?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I first changed the pantheon-greeter.conf to use a .jpg file which I also copied into /usr/share/backgrounds instead of the elementaryos-default option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I changed &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#default-wallpaper=/usr/share/backgrounds/elementaryos-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;into&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#default-wallpaper=/usr/share/backgrounds/winter.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But after reading further on the tutorial, which said not to mess with the defaults, I decided to change it back to keep the default option and instead I opened Files as sudo and edited the permissions of the copied file in /usr/share/backgrounds from 775 to 664. I thought this would have just allowed me to access the newly copied file through the system settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this did not work and instead my wallpaper and my logon screen both showed up as black now and when opening Settings, when trying to edit the settings for the Desktop and selecting &quot;Backgrounds&quot; in the menu on the bottom left, no pictures are displayed at all (all is blank).&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Xm4cb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xm4cb.png&quot; alt=&quot;Missing Wallpapers&quot;&gt;&lt;/a&gt;&#xA;Moreover, when navigating to /usr/share/backgrounds as a regular user, all files are now shown as missing (clicking them returns &quot;file does not exist&quot;) with permissions in their properties set to 000 and filesize of o Bytes. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/1NZVd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1NZVd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;When opening up pantheon-files as sudo, however, all files display correctly with thumbnails and can be opened also. As permissions, they display 664 then. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to get my wallpaper back by copying all wallpapers from /usr/share/backgrounds/ to ~/Pictures/ and then selecting Pictures as the source for my background in Settings, which also changed elementary os screenshotsmy greeter background, but I still want to get my Default backgrounds folder to work again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have an idea as to why the files are not inaccessible for my normal user and how to fix it? Any help is greatly appreciated. &lt;/p&gt;&#xA;" OwnerUserId="2799" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2019-12-13T03:36:58.990" Title="How can I repair permissions for the system backgrounds folder?" Tags="|pantheon-files|settings|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2722" PostTypeId="1" CreationDate="2015-10-26T14:24:12.483" Score="0" ViewCount="153" Body="&lt;p&gt;I tried installing elementary os freya on my dell laptop, at the end of installation, I get &quot;grub-pc failed to install on target...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a remark, I installed ubuntu gnome 14.10 without getting any error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you help will be much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks.&lt;/p&gt;&#xA;" OwnerUserId="2900" LastActivityDate="2015-10-26T14:24:12.483" Title="install elementary os freya grub-pc" Tags="|release-freya|system-installation|boot|grub|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-25T13:14:20.527" ContentLicense="CC BY-SA 3.0" />
  <row Id="2723" PostTypeId="1" AcceptedAnswerId="2779" CreationDate="2015-10-26T14:58:17.283" Score="3" ViewCount="618" Body="&lt;p&gt;I installed elementary OS Freya alongside Windows on an Asus Laptop. Installation goes well, but when I reboot to finally use elementary OS, I get only a black screen, &lt;code&gt;grub&amp;gt;&lt;/code&gt; console.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previously I installed Ubuntu 14.04 (alongside Windows) and everything was fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only mod I did when I was running Ubuntu, was hide the grub menu to run Ubuntu by default without ask, but keeping Windows on disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help will be apreciated. Thanks&lt;/p&gt;&#xA;" OwnerUserId="2856" LastEditorUserId="34" LastEditDate="2015-11-27T14:54:56.263" LastActivityDate="2015-11-27T14:54:56.263" Title="Install elementary OS alongside Windows - Got problems" Tags="|dual-boot|grub|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2724" PostTypeId="2" ParentId="2680" CreationDate="2015-10-26T15:08:09.250" Score="0" Body="&lt;p&gt;you could install gnome tweaks, this app lets you &quot;tweak&quot; a lot of things including plank  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install gnome-tweak-tool&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iU79X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iU79X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-10-26T15:08:09.250" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2725" PostTypeId="2" ParentId="903" CreationDate="2015-10-26T15:42:10.710" Score="5" Body="&lt;p&gt;&lt;strong&gt;To install Guest Additions:(elementary OS as guest)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.Close(shutdown) the elementay OS (guest)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.Identify the location of &lt;code&gt;VBoxGuestAdditions.iso&lt;/code&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(In Ubuntu  &lt;code&gt;/usr/share/virtualbox/VBoxGuestAdditions.iso&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.Go to VirtualBox --&gt; Settings --&gt; Storage --&gt; select Adds Optical Drive (green + with disk image) --&gt; Add the location of &lt;code&gt;.iso&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SDKFN.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.Now start the elementary OS guest and open File System , the you will see similar to the following image,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/RR5BB.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5.Now open terminal and run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /media/[user_name]/VBOXADDITIONS_5.0.0_101573&#xA;ls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here there will be &lt;code&gt;VBoxLinuxAdditions.run&lt;/code&gt;. Now in terminal,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ./VBoxLinuxAdditions.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After installation restart the elementary OS guest.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-19T11:03:06.233" LastActivityDate="2015-11-19T11:03:06.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2727" PostTypeId="2" ParentId="2719" CreationDate="2015-10-26T19:04:52.960" Score="3" Body="&lt;p&gt;The one on the left is Switchboard, not GNOME Control Center. It looks like you've made several modifications to your system. One of these modifications likely resulted in installing GNOME Control Center and breaking your installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest solution would be to just do a clean install and don't make those modifications on the new system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, you could try reverting your modifications, removing GNOME Control Center and re-installing the &lt;code&gt;switchboard-plug-gcc-*&lt;/code&gt; packages that are failing to open in Switchboard&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-10-26T19:04:52.960" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2728" PostTypeId="1" CreationDate="2015-10-26T19:36:16.863" Score="1" ViewCount="202" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7PBiG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7PBiG.png&quot; alt=&quot;Shutdown Menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hey! I have a Dual-Boot System and I want to add a new button to my shutdown menu. If I press &lt;kbd&gt;Windows 10&lt;/kbd&gt; it should run these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo efibootmgr -n 000E&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Or is there a better way to do this?&lt;/em&gt;&#xA;&lt;br&gt;&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Systems (Grub entries):&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;- Elementary OS&#xA;- Windows 10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;sudo efibootmgr&lt;/code&gt;:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Boot0000  Setup&#xA;Boot0001  Boot Menu&#xA;Boot0002  Diagnostic Splash Screen&#xA;Boot0003  Lenovo Diagnostics&#xA;Boot0004  Startup Interrupt Menu&#xA;Boot0005  Rescue and Recovery&#xA;Boot0006* USB CD&#xA;Boot0007  USB FDD&#xA;Boot0008  ATA HDD0&#xA;Boot0009  ATA HDD1&#xA;Boot000A* USB HDD&#xA;Boot000B  PCI LAN&#xA;Boot000D* ubuntu&#xA;Boot000E* Windows Boot Manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1193" LastActivityDate="2015-10-29T06:50:44.713" Title="Edit shutdown menu? Add custom entry?" Tags="|boot|dual-boot|efi|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2729" PostTypeId="1" CreationDate="2015-10-26T20:40:59.607" Score="2" ViewCount="893" Body="&lt;p&gt;Is there a metacity theme more like elementary's gtk+3 theme for better app integration? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I find that the header bar of non-gtk+3/native apps is rather flat. Semantically, it makes these apps look inactive. Comparatively, native elementary app headerbars fade to a flatter grey when inactive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My understanding is that it can be difficult to integrate non gtk+3 apps with elementary, as this must be done from the app's source. Alternatively is there a metacity theme more fitting to elementary's other native apps?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An example of flat headerbars&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Eopnn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Eopnn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2567" LastEditorUserId="2567" LastEditDate="2015-10-27T15:51:09.597" LastActivityDate="2016-05-24T22:06:11.050" Title="Is there a metacity theme more like elementary's gtk+3 theme for better app integration?" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2730" PostTypeId="1" CreationDate="2015-10-26T22:24:46.480" Score="2" ViewCount="3158" Body="&lt;p&gt;I've tried just about everything I've found suggested. Every time I put in my password, it looks like it is logging in, but then it cycles back to the password entry page. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have this issue as well and know of any fixes?&lt;/p&gt;&#xA;" OwnerUserId="2667" LastActivityDate="2020-07-03T04:27:04.147" Title="I am unable to login &quot;infinite login loop&quot;" Tags="|greeter|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2731" PostTypeId="1" CreationDate="2015-10-27T04:12:54.890" Score="1" ViewCount="24" Body="&lt;p&gt;I would like to reinstall elementary OS 0.3.1 Freya on my laptop. My system is currently in a dual boot with Linux Mint. How can I reinstall elementary OS and leave Linux Mint undisturbed? I also don't want to mess up GRUB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I currently have 200 GB allocated to elementary OS, and the rest allocated to Linux Mint. I want to reinstall elementary OS only in this space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2882" LastEditorUserId="34" LastEditDate="2015-11-19T13:32:42.133" LastActivityDate="2015-11-19T13:32:42.133" Title="How do I reinstall elementary OS and leave other operating systems undisturbed?" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="0" ClosedDate="2015-10-27T18:47:27.093" ContentLicense="CC BY-SA 3.0" />
  <row Id="2732" PostTypeId="1" AcceptedAnswerId="4295" CreationDate="2015-10-27T05:08:53.240" Score="17" ViewCount="7615" Body="&lt;p&gt;I apologize for the wider screenshots than normal, but since this is a dual monitor question/problem, it's necessary...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently my computer has decided that when I switch workspaces, anything on my second monitor is considered &quot;universal&quot;, as in, it stays on all workspaces.  As indicated by the arrows, the screen itself does not actually alter at all.  Previous behaviour had apps on both screens jumping between workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7JXQe.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7JXQe.jpg&quot; alt=&quot;Hangouts app in primary monitor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IVMry.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IVMry.png&quot; alt=&quot;Hangouts app in second monitor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not really much of an issue for me.  Just more of a curiosity and giving someone a heads up if it is indeed a bug of some sort.  If I want to keep an app from jumping workspaces, I keep it on the right hand monitor....it's kind of handy actually.  But figured I would mention it.&lt;/p&gt;&#xA;" OwnerUserId="2902" LastEditorUserId="45" LastEditDate="2016-02-07T07:57:34.500" LastActivityDate="2020-11-10T18:55:26.187" Title="Workspaces seem to only apply to the primary display. Is this a feature or a bug?" Tags="|release-freya|workspace|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2733" PostTypeId="1" CreationDate="2015-10-27T09:43:01.827" Score="2" ViewCount="524" Body="&lt;p&gt;I had setup lamp-server^ for local development environment, then just a few minutes ago it cannot find server any more. I wanted to purge it to install XAMPP but am getting another error, how can I identify and resolve this error please?&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo service apache2 start&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Starting web server apache2                                     * &lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The apache2 configtest failed.&lt;br&gt;&#xA;Output of config test was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Tue Oct 27 12:36:03.639362 2015] [alias:warn] [pid 9944] AH00671: The Alias directive in /etc/apache2/conf-enabled/phpmyadmin.conf at line 3 will probably never match because it overlaps an earlier Alias.&#xA;AH00558: apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message&#xA;(2)No such file or directory: AH02291: Cannot access directory '/var/log/apache2/' for main error log&#xA;(2)No such file or directory: AH02291: Cannot access directory '/var/log/apache2/' for error log of vhost defined at /etc/apache2/sites-enabled/000-default.conf:1&#xA;AH00014: Configuration check failed&#xA;Action 'configtest' failed.&#xA;The Apache error log may have more information.&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Then this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get purge lamp-server^&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Note, selecting 'mysql-server-core-5.5' for task 'lamp-server'&#xA;Note, selecting 'mysql-server-5.5' for task 'lamp-server'&#xA;Note, selecting 'libaio1' for task 'lamp-server'&#xA;Note, selecting 'mysql-client-core-5.5' for task 'lamp-server'&#xA;Note, selecting 'apache2-mpm-prefork' for task 'lamp-server'&#xA;Note, selecting 'libaprutil1' for task 'lamp-server'&#xA;Note, selecting 'libapache2-mod-php5' for task 'lamp-server'&#xA;Note, selecting 'php5-mysql' for task 'lamp-server'&#xA;Note, selecting 'php5-common' for task 'lamp-server'&#xA;Note, selecting 'libaprutil1-dbd-sqlite3' for task 'lamp-server'&#xA;Note, selecting 'php5-readline' for task 'lamp-server'&#xA;Note, selecting 'ssl-cert' for task 'lamp-server'&#xA;Note, selecting 'mysql-client-5.5' for task 'lamp-server'&#xA;Note, selecting 'libhtml-template-perl' for task 'lamp-server'&#xA;Note, selecting 'libterm-readkey-perl' for task 'lamp-server'&#xA;Note, selecting 'libaprutil1-ldap' for task 'lamp-server'&#xA;Note, selecting 'mysql-common' for task 'lamp-server'&#xA;Note, selecting 'php5-cli' for task 'lamp-server'&#xA;Note, selecting 'libmysqlclient18' for task 'lamp-server'&#xA;Note, selecting 'apache2-data' for task 'lamp-server'&#xA;Note, selecting 'php5-json' for task 'lamp-server'&#xA;Note, selecting 'libapr1' for task 'lamp-server'&#xA;Note, selecting 'apache2' for task 'lamp-server'&#xA;Note, selecting 'mysql-server' for task 'lamp-server'&#xA;Note, selecting 'apache2-bin' for task 'lamp-server'&#xA;Note, selecting 'libwrap0' for task 'lamp-server'&#xA;Note, selecting 'libdbd-mysql-perl' for task 'lamp-server'&#xA;Note, selecting 'tcpd' for task 'lamp-server'&#xA;Note, selecting 'libdbi-perl' for task 'lamp-server'&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;  libpulse0 : Depends: libwrap0 (&amp;gt;= 7.6-4~) but it is not going to be installed&#xA;  pulseaudio : Depends: libasound2-plugins but it is not going to be installed&#xA;          Recommends: pulseaudio-module-x11 but it is not going to be installed&#xA;          Recommends: gstreamer0.10-pulseaudio but it is not going to be installed&#xA;          Recommends: pulseaudio-utils but it is not going to be installed&#xA; E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2905" LastEditorUserId="2708" LastEditDate="2015-10-27T18:46:13.130" LastActivityDate="2015-10-27T18:46:13.130" Title="I have a problem with Apache2 web server" Tags="|web-development|" AnswerCount="0" CommentCount="3" ClosedDate="2015-12-15T22:57:58.357" ContentLicense="CC BY-SA 3.0" />
  <row Id="2734" PostTypeId="1" AcceptedAnswerId="2736" CreationDate="2015-10-27T10:02:48.043" Score="1" ViewCount="393" Body="&lt;p&gt;Trying to open a browser, I get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(midori4:1990): IBUS-WARNING **: The owner of/home/mr2uang/.config/ibus/bus is not root! &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or I have this from Google Chrome  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error while loading shared libraries: unexpected reloc type 0x01000001  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;segmentation fault (core dumped)   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Inconsistency detected by ld.so: ../sysdeps/x86_64/dl-machine.h:492:elf_machine_rela_relative: Assertion((reloc-&amp;gt;r_info) &amp;amp; 0xffffffff) == 8' failed!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can you explain why I have these issues from both Google Chrome Version 46.0.2490.80 (64-bit) and Midori? I need to reset a lot of times to use it normally. This happened after installed &lt;code&gt;ibus-unikey&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorDisplayName="user212" LastEditDate="2019-04-09T18:10:46.650" LastActivityDate="2019-04-09T18:10:46.650" Title="Browser sometime can't open after reset" Tags="|google-chrome|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2735" PostTypeId="1" CreationDate="2015-10-27T10:05:49.223" Score="3" ViewCount="114" Body="&lt;p&gt;I'm being plagued by an issue in Freya whereby the clickable zone associated with an item moves up and left. By this I mean, for example, in Chromium the tabs have crosses to click in order to close them, but when &lt;em&gt;something&lt;/em&gt; upsets Elementary the active zone for the X is shifted up and left by about 8-10px so that clicking the centre of the X doesn't close the tab and instead I need to move the mouse up and left to actually away from the X in order to close it. When this happens it effects ALL clickable items in a given application (buttons, tree views, menus, everything) but not necessarily all applications that are running at the time, so for example RubyMine might suddenly start exhibiting the issue while Chromium or Terminal are ok or visa versa. Closing and re-opening the application always fixes the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm pretty sure that this is tied into maximizing and restoring the window size. I've managed to get Chrome to repeatedly show that it's ok until the application is maximised.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else found this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rob&lt;/p&gt;&#xA;" OwnerUserId="2906" LastActivityDate="2015-10-28T14:15:36.677" Title="Clickable mouse location shifts" Tags="|release-freya|mouse|" AnswerCount="1" CommentCount="4" ClosedDate="2015-11-17T18:26:57.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="2736" PostTypeId="2" ParentId="2734" CreationDate="2015-10-27T10:26:50.027" Score="1" Body="&lt;p&gt;I have found a similar (may be exact) bug here &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/1125944&quot; rel=&quot;nofollow&quot;&gt;ibus/+bug&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Removing the &lt;code&gt;/home/[user]/.config/ibus/bus&lt;/code&gt; solve the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If still not solved, remove the &lt;code&gt;ibus-unikey&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove ibus-unikey&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also from comments you used &lt;code&gt;sudo add-apt-repository ppa:ubuntu-vn/ppa&lt;/code&gt; so you may get errors while running &lt;code&gt;apt-get update&lt;/code&gt; So remove it by &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:ubuntu-vn/ppa&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can install &lt;code&gt;ibus-unikey&lt;/code&gt; by the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ibus-unikey&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-27T14:40:06.010" LastActivityDate="2015-10-27T14:40:06.010" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="2737" PostTypeId="2" ParentId="2729" CreationDate="2015-10-27T14:46:17.603" Score="1" Body="&lt;p&gt;I don't think it is possible replace the window title to the header bar (your second image) because they are rendered differently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you noted, the Window Title is rendered by Gala (the window manager). The large header bar is rendered from inside the application (&lt;code&gt;Gtk.HeaderBar&lt;/code&gt; class) so it can hold more functionalities like buttons and text inputs. Not even all applications that uses Gtk make use of the &lt;code&gt;Gtk.HeaderBar&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to check but I think it's even possible to force to have both at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the Metacity theme. First, you'll need to &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/145ehp/install_metacity_window_manager/&quot; rel=&quot;nofollow&quot;&gt;install Metacity&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install metacity&#xA;$ metacity --replace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to &lt;a href=&quot;http://gnome-look.org/&quot; rel=&quot;nofollow&quot;&gt;Gnome-Look&lt;/a&gt;, search and install the theme you like. Any metallic or MacOS (search for &quot;Aqua&quot;) inspired themes should look fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;IMHO, the default theme of Gala isn't that confusing, but you got a good point.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="2461" LastEditDate="2015-10-27T17:23:07.870" LastActivityDate="2015-10-27T17:23:07.870" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2740" PostTypeId="1" AcceptedAnswerId="2741" CreationDate="2015-10-27T15:41:32.437" Score="3" ViewCount="2552" Body="&lt;p&gt;While installing &lt;code&gt;ibus-unikey&lt;/code&gt; I got this error  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ibus-unikey &#xA;Reading package lists... Done &#xA;Building dependency tree &#xA;Reading state information... Done &#xA;The following NEW packages will be installed: &#xA;ibus-unikey &#xA;0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded. &#xA;1 not fully installed or removed. &#xA;Need to get 0 B/267 kB of archives. &#xA;After this operation, 303 kB of additional disk space will be used. &#xA;Selecting previously unselected package ibus-unikey. &#xA;(Reading database ... 227994 files and directories currently installed.) &#xA; Preparing to unpack .../ibus-unikey_0.6.1-1build2_amd64.deb ... &#xA; Unpacking ibus-unikey (0.6.1-1build2) ... &#xA;dpkg: error processing package apport (--configure): &#xA;package is in a very bad inconsistent state; you should &#xA;reinstall it before attempting configuration &#xA;Setting up ibus-unikey (0.6.1-1build2) ... &#xA;Errors were encountered while processing: &#xA;apport &#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So far I have tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall ibus-unikey&#xA;&#xA;sudo dpkg --remove --force-remove-reinstreq ibus-unikey&#xA;&#xA;sudo dpkg --remove --force-remove-reinstreq --force-depends ibus-unikey&#xA;&#xA;sudo apt-get -f install&#xA;&#xA;sudo apt-get autoremove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But still same erors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using freya.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-27T15:53:57.540" LastActivityDate="2015-10-27T15:53:57.540" Title="How to solve &quot;package is in a very bad inconsistent state&quot;" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2741" PostTypeId="2" ParentId="2740" CreationDate="2015-10-27T15:41:32.437" Score="2" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /var/lib/dpkg/info/ibus-unikey.* /tmp/&#xA;&#xA;sudo dpkg --remove --force-remove-reinstreq ibus-unikey&#xA;&#xA;sudo apt-get remove ibus-unikey&#xA;&#xA;sudo apt-get autoremove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now install &lt;code&gt;ibus-unikey&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ibus-unikey&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To make general solution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /var/lib/dpkg/info/&amp;lt;packagename&amp;gt;.* /tmp/&#xA;&#xA;sudo dpkg --remove --force-remove-reinstreq &amp;lt;packagename&amp;gt;&#xA;&#xA;sudo apt-get remove &amp;lt;packagename&amp;gt;&#xA;&#xA;sudo apt-get autoremove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;source &lt;a href=&quot;http://www.linuxquestions.org/questions/showthread.php?p=5216367#post5216367&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-10-27T15:48:58.740" LastActivityDate="2015-10-27T15:48:58.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2742" PostTypeId="1" CreationDate="2015-10-27T17:10:40.850" Score="2" ViewCount="251" Body="&lt;p&gt;Its a horrible experience to use Freya on MacbookAir 6,2.&#xA;I have tried many methods such as tlp, powersave, thermald and pstate enabling to minimize the heating issue.&#xA;I finally found a better method: by adding &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;chown -R $USER:$USER /sys/kernel/debug&#xA;echo OFF &gt; /sys/kernel/debug/vgaswitcheroo/switch&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to /etc/rc.local to reduce the GPU usage cased by vga switching.&#xA;However, the GPU usage will be increase to 100% if I watch a video on youtube so that the laptop become hot again. If I watch the same video on OSX or windows, this problem doesn't exist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the other hand, the auto brightness adjustment of keyboard is not available and result in some power consumption. I tried lightum and it will cause the heating problem to be more serious. I then run it in the background by entering lightum -U in Terminal and the problem has been improved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any other solution for my problem? Or will this be solved in the next version? I really want to use this OS as my major working environment, but the heating issue must be solved so that my hardware and the power consumption can be saved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop model: Macbook Air 6,2&#xA;Graphic Card: Intel HD Graphics 5000&lt;/p&gt;&#xA;" OwnerUserId="2909" LastActivityDate="2019-02-02T04:03:25.407" Title="Overheating Issue on MacbookAir 6,2" Tags="|release-freya|power|macbook|brightness|intel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2743" PostTypeId="1" CreationDate="2015-10-27T17:24:30.147" Score="0" ViewCount="44" Body="&lt;p&gt;When i try to open keyboard through terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ switchboard keyboard&#xA;[_LOG_LEVEL_INFO 00:45:42.319800] Application.vala:155: System Settings version: 2.0&#xA;[_LOG_LEVEL_INFO 00:45:42.319880] Application.vala:157: Kernel version: 3.19.0-32-generic&#xA;[_LOG_LEVEL_INFO 00:45:42.333001] Tweaks.vala:229: Activating Tweak plug&#xA;[_LOG_LEVEL_WARN 00:45:42.375612] PlankSettings.vala:165: Key file contains key 'Monitor' in group 'PlankDockPreferences' which has a value that cannot be interpreted.&#xA;[_LOG_LEVEL_FATAL 00:45:42.381051] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:45:42.381109] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:45:42.381182] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:45:42.381216] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:45:42.381354] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:45:42.381383] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:45:42.381445] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:45:42.381472] System Settings will not function properly.&#xA;/usr/bin/gnome-control-center: line 20: 11091 Segmentation fault      (core dumped) switchboard $switchboard_options $requested_plug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Occured &lt;code&gt;Segmentation fault      (core dumped)&lt;/code&gt;&lt;br&gt;&#xA;Already try this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1554/when-i-try-to-access-the-keyboard-settings-the-app-just-closes-how-do-i-access&quot;&gt;duplicate&lt;/a&gt; but don't have answer.&lt;br&gt;&#xA;But when i try to open by this command &lt;code&gt;gksu gnome-control-center keyboard&lt;/code&gt; it's working ok.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gksu switchboard keyboard&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(gksu:11120): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:11120): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:11120): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:11120): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(gksu:11120): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;[_LOG_LEVEL_INFO 00:46:35.760625] Application.vala:155: System Settings version: 2.0&#xA;[_LOG_LEVEL_INFO 00:46:35.760673] Application.vala:157: Kernel version: 3.19.0-32-generic&#xA;[_LOG_LEVEL_INFO 00:46:35.777143] Tweaks.vala:229: Activating Tweak plug&#xA;[_LOG_LEVEL_WARN 00:46:35.780529] GtkSettings.vala:48: Error loading GTK+ Keyfile settings.ini: No such file or directory&#xA;[_LOG_LEVEL_WARN 00:46:35.780583] GtkSettings.vala:69: Error getting GTK+ int setting: Key file does not have group 'Settings'&#xA;[_LOG_LEVEL_FATAL 00:46:35.824232] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:46:35.824277] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:46:35.824346] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:46:35.824375] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:46:35.824499] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:46:35.824528] System Settings will not function properly.&#xA;[_LOG_LEVEL_FATAL 00:46:35.824589] [GLib] g_variant_get_int32: assertion 'g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed&#xA;[_LOG_LEVEL_FATAL 00:46:35.824616] System Settings will not function properly.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can u guys explain and fix this problem&lt;br&gt;&#xA;I'm using Freya&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-10-28T13:04:54.473" Title="Switch board option keyboard core dumped (Segment fault) with normal user" Tags="|release-freya|keyboard|" AnswerCount="0" CommentCount="3" ClosedDate="2015-11-09T10:13:18.180" ContentLicense="CC BY-SA 3.0" />
  <row Id="2744" PostTypeId="1" AcceptedAnswerId="2806" CreationDate="2015-10-27T21:23:37.133" Score="3" ViewCount="507" Body="&lt;p&gt;I am experiencing a weird bug: Some UI elements in setting dialogues (e.g. Scratch, Bluetooth, Startup Applications, Date &amp;amp; Time) are not visible when the respective window opens. As soon as I hover with the mouse pointer they appear, although not all of them apparently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recorded &lt;a href=&quot;https://dl.dropboxusercontent.com/u/28321477/eos_ui_issue.gif&quot; rel=&quot;nofollow&quot;&gt;a screen-cast reproducing the issue&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens with both Intel and nvida graphics. The problem originally showed in freya-0.3.0 but is still present after a fresh install of freya-0.3.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone experienced this problem (or similar) and/or knows a solution?&#xA;I already filed a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1466106&quot; rel=&quot;nofollow&quot;&gt;bug report&lt;/a&gt; some months ago but didn't get any official response...&lt;/p&gt;&#xA;" OwnerUserId="81" LastEditorUserId="81" LastEditDate="2015-11-26T09:49:56.880" LastActivityDate="2016-01-11T20:13:50.443" Title="UI elements are not displayed" Tags="|release-freya|settings|user-interface|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2746" PostTypeId="1" CreationDate="2015-10-28T03:31:54.423" Score="1" ViewCount="620" Body="&lt;p&gt;Am I supposed to switch to nvidia-346 or nvidia-346-updates?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Additional Drivers application tells me that nvidia-346 has been tested, but some people tell me to use the updates one. Which one should I switch to?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently using the Nouveau display driver.&lt;/p&gt;&#xA;" OwnerUserId="2882" LastEditorUserId="45" LastEditDate="2015-12-27T07:01:34.617" LastActivityDate="2015-12-27T07:01:34.617" Title="Which NVIDIA driver am I supposed to switch to?" Tags="|graphic-drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2747" PostTypeId="2" ParentId="2746" CreationDate="2015-10-28T03:39:54.973" Score="-1" Body="&lt;p&gt;Use the lastest 352.55 from &lt;a href=&quot;http://www.nvidia.com/object/unix.html&quot; rel=&quot;nofollow&quot;&gt;home page&lt;/a&gt;&lt;br&gt;&#xA;If u get the black screen. Just use the trick &lt;code&gt;nomodeset&lt;/code&gt; &lt;a href=&quot;https://elementaryforums.com/index.php?threads/howto-install-latest-nvidia-driver-on-linux-without-getting-black-screen.7/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;br&gt;&#xA;I'm using freya and 352.55 driver now&lt;/p&gt;&#xA;" OwnerUserId="2888" LastActivityDate="2015-10-28T03:39:54.973" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2749" PostTypeId="2" ParentId="2735" CreationDate="2015-10-28T14:15:36.677" Score="0" Body="&lt;p&gt;Ok. I think &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1445329&quot; rel=&quot;nofollow&quot;&gt;this is a bug&lt;/a&gt; not yet solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way I deal with it is just resizing the window after restoring. Maybe in Loki there will be a permanent fix. :D&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-10-28T14:15:36.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2750" PostTypeId="2" ParentId="2723" CreationDate="2015-10-28T18:43:06.800" Score="1" Body="&lt;p&gt;I've experienced the problem of Freya booting straight to the Grub console after installation. However, I did not have dual boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to fix the issue by following the steps laid out by Rob Hartley in the following link: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1492801&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it helps you, too! Good luck with it. After that initial hick up and some configuration I am starting to really like my laptop with elementary OS on it and I hope you have a similarly good experience! &lt;/p&gt;&#xA;" OwnerUserId="2799" LastEditorUserId="34" LastEditDate="2015-11-19T13:36:50.153" LastActivityDate="2015-11-19T13:36:50.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2751" PostTypeId="2" ParentId="2728" CreationDate="2015-10-28T18:54:29.877" Score="3" Body="&lt;p&gt;First off, grub supports rebooting in to a specific OS, so you might want to use that instead. See &lt;a href=&quot;https://unix.stackexchange.com/questions/43196/how-can-i-tell-grub-i-want-to-reboot-into-windows-before-i-reboot&quot;&gt;https://unix.stackexchange.com/questions/43196/how-can-i-tell-grub-i-want-to-reboot-into-windows-before-i-reboot&lt;/a&gt; for more details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add an extra button would require to edit the source code of Pantheon, which would require that you manually compile Pantheon for every update. An easier way to get a 'Windows 10'-button would be to make a script that automatically configures Grub and reboots. So here's how to do that: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;(CAUTION! If you don't know what this is, don't blindly copy this code!)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;1. Make a script that looks like this:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;efibootmgr -n 000E&#xA;# OR&#xA;grub-reboot '&amp;lt;boot entry name of windows 10&amp;gt;'&#xA;&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;2. Make a &lt;code&gt;Windows 10.desktop&lt;/code&gt; file like this:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Windows 10&#xA;Comment=Reboot into Windows&#xA;Exec=pkexec /path/to/script.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Move this file to &lt;code&gt;/usr/local/share/applications&lt;/code&gt; to put it in the application list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://standards.freedesktop.org/desktop-entry-spec/latest/ar01s05.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;The freedesktop specification for &lt;code&gt;*.desktop&lt;/code&gt; files&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;3. Make the script executable&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run this in a terminal:&#xA;&lt;code&gt;chmod +x /path/to/script.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;4. Test it.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Double click the &lt;code&gt;Windows 10.desktop&lt;/code&gt; file and check that it works.&lt;/p&gt;&#xA;" OwnerUserId="2917" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2015-10-29T06:50:44.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2752" PostTypeId="1" CreationDate="2015-10-28T21:58:57.183" Score="8" ViewCount="424" Body="&lt;p&gt;I've installed the official slack app (&lt;a href=&quot;https://slack.com/downloads&quot;&gt;https://slack.com/downloads&lt;/a&gt;) but when I closed (not quitting the app) there's no icon on wingpanel.. Is there some way to have it?&lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-10-29T14:35:07.650" Title="Slack icon on wingpanel" Tags="|release-freya|wingpanel|apps|" AnswerCount="0" CommentCount="1" ClosedDate="2016-02-03T01:45:52.413" ContentLicense="CC BY-SA 3.0" />
  <row Id="2753" PostTypeId="1" CreationDate="2015-10-29T00:01:52.920" Score="3" ViewCount="418" Body="&lt;p&gt;Can you make a chrome application default to open files in pantheon?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to set &lt;code&gt;.txt&lt;/code&gt; files to open a application called &quot;text&quot; which is a chrome application.&lt;/p&gt;&#xA;" OwnerUserId="2920" LastEditorUserId="37" LastEditDate="2015-10-29T18:15:58.640" LastActivityDate="2016-12-08T15:28:38.087" Title="Chrome apps as default applications" Tags="|applications|google-chrome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2754" PostTypeId="2" ParentId="2723" CreationDate="2015-10-29T08:10:20.660" Score="1" Body="&lt;p&gt;I got the exact same problem since 2 weeks and I managed to recover just yesterday.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have an asus vivobook and I was also stuck at grub (you can even go further and boot to a busybox/initramfs prompt but it's not helping).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to install elementary 0.3 released on 2015-04-11. I think it handles in a much better way the boot than the 0.3.1 version.&#xA;So just do a live usb of 0.3 and install it to replace 0.3.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once 0.3 is installed, the update manager will install all the updates from 0.3.1 :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cheers&lt;/p&gt;&#xA;" OwnerUserId="2731" LastActivityDate="2015-10-29T08:10:20.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2755" PostTypeId="1" CreationDate="2015-10-29T09:43:22.170" Score="7" ViewCount="1017" Body="&lt;p&gt;I'm using elementary OS Freya 0.3.1 and would like to disable compositing while gaming. I'm playing CSGO (Linux port, not Windows version using Wine) and unlike on my Windows 10, it's lagging a lot. I would also like to disable hotcorners while in fullscreen gaming, as it goes into multitasking view randomly.&lt;/p&gt;&#xA;" OwnerUserId="2884" LastEditorUserId="34" LastEditDate="2015-11-19T13:26:32.323" LastActivityDate="2016-02-03T21:18:38.860" Title="How to disable desktop composition while gaming in fullscreen?" Tags="|release-freya|window-management|desktop|games|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2756" PostTypeId="2" ParentId="2275" CreationDate="2015-10-29T12:03:14.810" Score="2" Body="&lt;p&gt;Brother has an Debian Linux installer (which will work for elementay OS, by virtue of it being based on Ubuntu which is based on Debian) for the HL-2040. The HL-2040 is the closest driver available and which will most likely work for the HL-2030. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Their &lt;a href=&quot;http://support.brother.com/g/b/downloadtop.aspx?c=us&amp;amp;lang=en&amp;amp;prod=hl2040_all&quot; rel=&quot;nofollow&quot;&gt;starting page&lt;/a&gt; has links for each region supported.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click on the link for the region where the printer is being installed and, on the page that opens, the language the most closely matches that of the user.&lt;/li&gt;&#xA;&lt;li&gt;Browse to the &lt;a href=&quot;http://support.brother.com/g/b/downloadtop.aspx?c=us&amp;amp;lang=en&amp;amp;prod=hl2040_all&quot; rel=&quot;nofollow&quot;&gt;HL-2040 download page&lt;/a&gt; (&lt;strong&gt;Downloads&lt;/strong&gt;&gt; &lt;strong&gt;Monochrome Laser&lt;/strong&gt; &gt; &lt;strong&gt;HL 2 series&lt;/strong&gt;&gt; &lt;strong&gt;HL-2040&lt;/strong&gt;).&lt;/li&gt;&#xA;&lt;li&gt;On the HL-2040 Downloads page, select &lt;strong&gt;Linux (deb)&lt;/strong&gt; and click the **&#xA;Search** button.&lt;/li&gt;&#xA;&lt;li&gt;On the page that opens, click the &lt;strong&gt;Driver Install Tool&lt;/strong&gt; link.&lt;/li&gt;&#xA;&lt;li&gt;Review the EULA and, if you agree, click the &lt;strong&gt;Agree to the EULA and Download&lt;/strong&gt; button.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;If you don't agree, this will stop the download process and you can't use the printer driver. If you agree, a download dialog should open.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;In the downloads dialog that opens, select &lt;strong&gt;Save&lt;/strong&gt; and click the &lt;strong&gt;Okay&lt;/strong&gt; button.&lt;/li&gt;&#xA;&lt;li&gt;Now, open an Administrator window in Files (right click on the &lt;strong&gt;Files&lt;/strong&gt; icon in the Dock and select 'New Window as Administrator' and enter the password for the admin user on the system (usually the first user account set up during the installation).&lt;/li&gt;&#xA;&lt;li&gt;Click on the the &lt;strong&gt;File System&lt;/strong&gt; shortcut (same as alias on OS X) and browse to the Downloads folder &lt;em&gt;for the user that is currently logged in&lt;/em&gt; (File System/home/userName).&lt;/li&gt;&#xA;&lt;li&gt;Right click on the &lt;strong&gt;Downloads&lt;/strong&gt; folder and select &lt;strong&gt;Open In&lt;/strong&gt;&gt; &lt;strong&gt;Terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Follow the instructions on in the &lt;strong&gt;How to Install&lt;/strong&gt; section on the &lt;a href=&quot;http://support.brother.com/g/b/downloadhowto.aspx?c=us&amp;amp;lang=en&amp;amp;prod=hl2040_all&amp;amp;os=128&amp;amp;dlid=dlf006893_000&amp;amp;flang=4&amp;amp;type3=625&quot; rel=&quot;nofollow&quot;&gt;Driver Install Tool&lt;/a&gt; page starting with &lt;strong&gt;Step 3&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Note:&lt;/strong&gt; When the installer prompts you to enter the model name, enter &quot;HL-2030&quot; (without quotes).&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;11&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;When the installer finishes (it takes &lt;strong&gt;&lt;em&gt;many&lt;/em&gt;&lt;/strong&gt; minutes so be patient), open the Printers set up dialog (&lt;strong&gt;Applications&lt;/strong&gt;&gt; &lt;strong&gt;System Settings&lt;/strong&gt;&gt; &lt;strong&gt;Printers&lt;/strong&gt;).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Locate the model in the pane on the left of the dialog and select it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Verify the status (to the right, above &quot;Location&quot;: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;If it is listed as &quot;Ready&quot;, the printer is ready to use.&lt;/li&gt;&#xA;&lt;li&gt;If the status is not, make sure the printer is turned on and connected.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;This completes the process.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Note:&lt;/em&gt;&lt;/strong&gt; &lt;em&gt;If the system identifies the driver as missing, try the procedure in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2832/how-to-configure-a-missing-printer-driver&quot;&gt;this post&lt;/a&gt;.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="2923" LastEditorUserId="34" LastEditDate="2015-11-19T13:34:37.800" LastActivityDate="2015-11-19T13:34:37.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2759" PostTypeId="2" ParentId="1193" CreationDate="2015-10-29T15:02:12.560" Score="2" Body="&lt;p&gt;This is a known bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently mouse battery notifications are prioritized over the laptop battery in Freya. Yeah, its dumb. There was a work around involving editing the 95-upower-csr.rules file, but it doesn't work anymore since the last update to Freya--I think the indicator doesn't update anymore. SOmeone put info on a cron job that forces the update, but then the indicator app won't relaunch. I unfortunately spammed the official thread (I'm sorry), but this issue makes the portability of laptops null and void, so I think its a pretty big issue and needs to be fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2928" LastActivityDate="2015-10-29T15:02:12.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2760" PostTypeId="1" AcceptedAnswerId="4085" CreationDate="2015-10-29T17:52:46.540" Score="4" ViewCount="523" Body="&lt;p&gt;I can't see debug under org-&gt;gtk-&gt;settings or I have to install to get that?&lt;/p&gt;&#xA;" OwnerUserId="811" LastActivityDate="2016-01-21T21:28:46.190" Title="How to open Gtkinspector on Freya?" Tags="|release-freya|gtk|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2761" PostTypeId="1" CreationDate="2015-10-29T18:52:03.230" Score="0" ViewCount="873" Body="&lt;p&gt;I have searched a long time but couldn't find a bug or a problem like mine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So when I start elementary OS and I open any program and make the window fullscreen my wingpanel goes crazy.&#xA;It starts to blink/flicker white across the whole wingpanel all the time. I don't really know how to describe it any other way but it's driving me nuts. I am also running windows 10 on this machine and ran Linux Mint like 4 weeks ago and I never experienced something like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What i've done to fix it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I tried logging off/on and restarting many times but the problem        persists.&lt;/li&gt;&#xA;&lt;li&gt;I tried reinstalling elementary OS.&lt;/li&gt;&#xA;&lt;li&gt;I typed &lt;code&gt;pkill wingpanel&lt;/code&gt; and hoped wingpanel just needs to be resetted.&lt;/li&gt;&#xA;&lt;li&gt;I got the &quot;dconf Editor&quot; via &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; and went to org--&gt;pantheon--&gt;desktop--&gt;wingpanel and switched off the &quot;auto-adjust-alpha&quot; option and set the &quot;background-alpha&quot; option to &quot;0.0&quot; because I thought it only happens when the wingpanel is black. But it also happens when it's transparent.&lt;/li&gt;&#xA;&lt;li&gt;I typed &lt;code&gt;gsettings set org.pantheon.desktop.wingpanel background-alpha 0.35&lt;/code&gt; in terminal but it seemed to be the same option as in the &quot;dconf Editor&quot;.&lt;/li&gt;&#xA;&lt;li&gt;I tried different display resolutions.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'm not an expert on linux systems so I don't really know what to do anymore because I cant' find anything that could help me with google.&#xA;If you guys have questions feel free to ask. English is not my mothers tongue so please be kind with me :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully you can help me.&lt;/p&gt;&#xA;" OwnerUserId="2891" LastEditorUserId="2382" LastEditDate="2015-10-30T10:19:48.730" LastActivityDate="2015-11-02T14:45:10.330" Title="elementary OS Freya Wingpanel is flickering/blinking when window is in fullscreen" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2762" PostTypeId="1" CreationDate="2015-10-29T18:52:39.860" Score="4" ViewCount="6322" Body="&lt;p&gt;How can I make the size of the mouse cursor bigger in Freya .3.1 ?? Any help would be appreciated. Just beyond a total noob. I do know that in Linux Mint Cinnamon this is easily doable but I don't like their UI. The guys at Elementary are doing an awesome job that is something new and unique. I am just a disabled musician living on disability, but I do plan on getting $20 to them in the next month or so. Totally worth it.&lt;/p&gt;&#xA;" OwnerUserId="2930" LastEditorUserId="8517" LastEditDate="2020-10-19T16:47:26.800" LastActivityDate="2022-09-24T03:32:36.350" Title="How can I increase the mouse cursor size?" Tags="|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="2764" PostTypeId="2" ParentId="2762" CreationDate="2015-10-29T19:35:41.713" Score="2" Body="&lt;p&gt;You need to install dconf Editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After, run dconf Editor from applications menu, go to &lt;code&gt;org &amp;gt; gnome &amp;gt; desktop &amp;gt; interface&lt;/code&gt;, find position &quot;cursor-size&quot; and input needed size of cursor, for example &quot;36&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vrfzg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vrfzg.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If cursor size suits for you, you needed to restart system from power menu.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-10-29T19:35:41.713" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2765" PostTypeId="1" CreationDate="2015-10-29T19:41:54.153" Score="1" ViewCount="794" Body="&lt;p&gt;I have a tablet with keyboard (2 in 1) Asus T100TA with 32 GB SSD and 32 GB SD card, actually with Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I would like install and use elementary OS, but flash disk and DVD not booting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently, it can have a problem with WiFi and I wonder if it is possible to somehow install elementary OS on this tablet and have it fully operational.&lt;/p&gt;&#xA;" OwnerUserId="2931" LastEditorUserId="3757" LastEditDate="2016-05-06T01:32:43.790" LastActivityDate="2016-05-06T01:32:43.790" Title="Install elementary OS on ASUS T100TA" Tags="|system-installation|uefi|asus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2766" PostTypeId="1" AcceptedAnswerId="2768" CreationDate="2015-10-29T21:06:36.483" Score="2" ViewCount="88" Body="&lt;p&gt;After some latest update &lt;code&gt;wget&lt;/code&gt; fails! I have tried to add PPAs from PlayOnLinux's list, and the place I am to enter the passwd it always returns lines shown on the image below. Has anybody got a similar error?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qGptI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qGptI.png&quot; alt=&quot;ERROR: This command can only be used by root.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2932" LastActivityDate="2015-11-01T08:39:43.790" Title="Adding a repo fails" Tags="|software-installation|pantheon-terminal|software-sources|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2767" PostTypeId="2" ParentId="2766" CreationDate="2015-10-29T21:17:31.770" Score="2" Body="&lt;p&gt;You can't copy&amp;amp;paste all commands at once, you have to do it line by line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the more important thing is, you should &lt;strong&gt;know&lt;/strong&gt; what these commands do, &lt;strong&gt;before&lt;/strong&gt; you run them on your computer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -q &quot;http://deb.playonlinux.com/public.gpg&quot; -O- | sudo apt-key add -&#xA;sudo wget http://deb.playonlinux.com/playonlinux_trusty.list -O /etc/apt/sources.list.d/playonlinux.list&#xA;sudo apt-get update&#xA;sudo apt-get install playonlinux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the first command downloads the GPG signing key of the playonlinux&#xA;repository and adds it to the keyring.&lt;/li&gt;&#xA;&lt;li&gt;the second command adds the playonlinux repository to your list.&lt;/li&gt;&#xA;&lt;li&gt;the third command updates the list of all avaible packages of your&#xA;repositories&lt;/li&gt;&#xA;&lt;li&gt;the last command finally installs playonlinux (and all of it's&#xA;dependencies) on your computer&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2015-10-29T21:31:38.503" LastActivityDate="2015-10-29T21:31:38.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2768" PostTypeId="2" ParentId="2766" CreationDate="2015-10-30T00:09:13.543" Score="2" Body="&lt;p&gt;You have missed &lt;code&gt;sudo&lt;/code&gt; in second part of the command.The command should be as follows.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -q &quot;http://deb.playonlinux.com/public.gpg&quot; -O- | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need more details see my revision history &lt;a href=&quot;https://elementaryos.stackexchange.com/revisions/2768/1&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-01T08:39:43.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2769" PostTypeId="1" AcceptedAnswerId="2772" CreationDate="2015-10-30T01:13:07.540" Score="1" ViewCount="13778" Body="&lt;p&gt;I can go into Freya's Tweaks in Settings to have Close, Minimize, and Maximize appear on the top right of each window, but this does NOT seem to work for Google Chrome. The Close 'X' is still appearing on the upper left of the window even after applying the Tweaks settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to change this?&lt;/p&gt;&#xA;" OwnerUserId="2872" LastActivityDate="2020-07-22T11:39:06.120" Title="Get close, minimize, and maximize in Chrome to appear on the right side in Freya?" Tags="|google-chrome|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2770" PostTypeId="2" ParentId="2377" CreationDate="2015-10-30T01:14:11.040" Score="5" Body="&lt;p&gt;The closest I have found is &lt;code&gt;montage&lt;/code&gt; from &lt;a href=&quot;http://www.imagemagick.o&quot; rel=&quot;nofollow noreferrer&quot;&gt;image magik&lt;/a&gt;. It's not quite what you want, and you may have already seen it and decided it won't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, install imagemagik:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install imagemagick&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then we will use the montage command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;montage *.jpg -tile 5x -geometry 200x+10+0 montage.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it gives an output like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AvMwU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AvMwUm.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click for a bigger image.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-10-30T01:14:11.040" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2771" PostTypeId="2" ParentId="2377" CreationDate="2015-10-30T01:31:10.587" Score="3" Body="&lt;p&gt;Thanks to &lt;a href=&quot;https://askubuntu.com/a/690099/186134&quot;&gt;@magicalex over on Ask Ubuntu&lt;/a&gt;, I have found something pretty close to what I was looking for. Sometimes it can crop the images slightly but you can click regenerate to try another arrangement. You can also swap images around by clicking them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can download it &lt;a href=&quot;https://github.com/adrienverge/PhotoCollage&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;here&lt;/strong&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fydd5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fydd5.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2567" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-10-30T16:16:15.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2772" PostTypeId="2" ParentId="2769" CreationDate="2015-10-30T03:17:52.997" Score="3" Body="&lt;p&gt;Go into google chrome settings and in apperance you will find &lt;strong&gt;use system title bar and borders&lt;/strong&gt; check it and that'll do.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-10-30T03:17:52.997" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2773" PostTypeId="2" ParentId="2769" CreationDate="2015-10-30T03:41:35.323" Score="2" Body="&lt;p&gt;If you want to have &lt;code&gt;minimize&lt;/code&gt; , &lt;code&gt;maximize&lt;/code&gt; and &lt;code&gt;close&lt;/code&gt; buttons on top right of &lt;strong&gt;chrome&lt;/strong&gt; :&lt;/p&gt;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gconftool-2 --set /apps/metacity/general/button_layout --type string &amp;quot;:minimize,maximize,close&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now restart chrome.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;GUI&lt;/strong&gt; method:&lt;/p&gt;&#xA;&lt;p&gt;Install &lt;code&gt;gconf-editor&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now Open &lt;code&gt;configuration-editor&lt;/code&gt; --&amp;gt; apps--&amp;gt;metacity--&amp;gt; general, select &lt;code&gt;button_layout&lt;/code&gt; and right click --&amp;gt; &lt;em&gt;Edit Key&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now add value &lt;code&gt;:minimize,maximize,close&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9ajJi.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; : If you &lt;em&gt;enable&lt;/em&gt; &lt;strong&gt;use system title bar and borders&lt;/strong&gt; It will not work.So make sure that was disabled. I have tested it in freya.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;em&gt;how to rollback&lt;/em&gt;?&lt;/p&gt;&#xA;&lt;p&gt;Open &lt;code&gt;configuration-editor&lt;/code&gt; --&amp;gt; &lt;code&gt;apps&lt;/code&gt; --&amp;gt; &lt;code&gt;metacity&lt;/code&gt;--&amp;gt; &lt;code&gt;general&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now in right side of the window, select &lt;code&gt; button_layout&lt;/code&gt; and right-click select &lt;code&gt;Unset key&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now restart chrome.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: To give &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2769/get-close-minimize-and-maximize-in-chrome-to-appear-on-the-right-side-in-freya?noredirect=1#comment5138_2769&quot;&gt;clarity&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;At first:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/vBCWd.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Adjusting settings-&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zJy92.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;After &lt;strong&gt;still close button on left&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Jm6fk.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;After executing &lt;strong&gt;command in my answer&lt;/strong&gt; :&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/40r3j.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-27T04:17:45.483" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2776" PostTypeId="1" AcceptedAnswerId="2799" CreationDate="2015-10-30T11:20:03.123" Score="5" ViewCount="2288" Body="&lt;p&gt;I would like combine two icon sets into one new icon set. Meaning I want the wingpanel icons (sound,battery,wifi,etc) and the application toolbar icons (geary,scratch,etc) from the default elementary icon set but combined with the application icons (as seen in plank or slingshot) from Faba-Mono or Numix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my theory I would like to just copy some folders together to a new folder and select a new the icon theme in elementary tweaks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can something like this be done and where are those folders located?&lt;/p&gt;&#xA;" OwnerUserId="2922" LastEditorUserId="1139" LastEditDate="2015-10-30T18:38:16.267" LastActivityDate="2015-11-02T20:20:04.863" Title="How to combine the icons of different icon sets into a new one?" Tags="|wingpanel|themes|icons|" AnswerCount="3" CommentCount="0" ClosedDate="2017-10-08T17:30:44.637" ContentLicense="CC BY-SA 3.0" />
  <row Id="2777" PostTypeId="2" ParentId="2776" CreationDate="2015-10-30T13:24:14.750" Score="2" Body="&lt;p&gt;The files of the icon themes you have installed and all that come by default are saved under &lt;code&gt;/usr/share/icons&lt;/code&gt;. From there you can copy the ones you like and combine them into a new one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a software which could help you do that is &lt;code&gt;menulibre&lt;/code&gt;, you can select specific icons that you want to change.&#xA;You can install it using:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install menulibre&lt;/code&gt;                                 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't install that way  you can use this ppa: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:versable/elementary-update  &#xA;sudo apt-get update  &#xA;sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="37" LastEditDate="2015-11-01T09:33:57.213" LastActivityDate="2015-11-01T09:33:57.213" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2778" PostTypeId="2" ParentId="2760" CreationDate="2015-10-30T13:56:48.567" Score="1" Body="&lt;p&gt;The keybinding for Gtk+ Inspector is &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;i&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it is not working, you can enable it with executing this in terminal&lt;br&gt;&#xA;&lt;code&gt;gsettings set org.gtk.Settings.Debug enable-inspector-keybinding true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-10-30T13:56:48.567" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2779" PostTypeId="2" ParentId="2723" CreationDate="2015-10-30T17:12:37.150" Score="2" Body="&lt;p&gt;There's many solutions for this on the web, I used another one not listed here, that's why my answer. This is the workaroud I used:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;boot-repair&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to Advanced options&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for 'purge grub' option&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Follow the steps&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2856" LastActivityDate="2015-10-30T17:12:37.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2780" PostTypeId="2" ParentId="81" CreationDate="2015-10-30T18:58:35.370" Score="2" Body="&lt;p&gt;I have another way ,worked with me without change anything by Permission or File.&lt;br&gt;&#xA; &lt;strong&gt;1.&lt;/strong&gt; You open &lt;strong&gt;&lt;code&gt;Applicatons&lt;/code&gt; -&gt; &lt;code&gt;System Settings&lt;/code&gt; -&gt; &lt;code&gt;Desktop&lt;/code&gt; -&gt; &lt;code&gt;Click&lt;/code&gt;&lt;/strong&gt; what wallpaper if u want.      &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;=&gt; That will change Backgrounds wallpaper and Login wallpaper&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2.&lt;/strong&gt; You chose what picture do you want to be &lt;strong&gt;&lt;code&gt;backgrounds wall paper -&amp;gt; Right click -&amp;gt; Set background&lt;/code&gt;&lt;/strong&gt;.   &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;=&gt; So your desktop will change and your login doesn't.&lt;/h2&gt;&#xA;&#xA;&lt;h2&gt;Explain :&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;will change elementary-default file by System.      &lt;/li&gt;&#xA;&lt;li&gt;Only background change&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;Note :&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You should use 2560*1600 to be your login&lt;br&gt;&#xA;And i don't thing &lt;code&gt;rm elementary-default&lt;/code&gt; or  editted by yourself  is good idea&lt;br&gt;&#xA;Move your picture to folder &lt;code&gt;/usr/share/backgrounds/&lt;/code&gt; so you can see it in your &lt;code&gt;Desktop&lt;/code&gt; option&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="2888" LastEditDate="2015-10-30T19:14:01.710" LastActivityDate="2015-10-30T19:14:01.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2781" PostTypeId="1" CreationDate="2015-10-30T19:30:33.293" Score="1" ViewCount="177" Body="&lt;p&gt;I had KODI configured to start automatically while running the beta.  I upgraded to the released version (sudo apt-get update, upgrade and then dist-upgrade).&#xA;It seemed to run successfully and KODI still runs at startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now, when I exit Kodi, i get logged off and can only log back in to a Kodi.  There is a gear shift where I can select to log in to Pantheon but it does nothing...   I cannot get back to the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What have I done to myself?   Is there a way from command line (via putty) to re-setup Elementary?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2939" LastActivityDate="2015-11-01T12:02:16.787" Title="KODI is the only program i can run" Tags="|desktop|startup|show-desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2782" PostTypeId="2" ParentId="2776" CreationDate="2015-10-30T23:21:29.233" Score="0" Body="&lt;p&gt;Edit file of app you want to customize in &lt;code&gt;/usr/share/applications/&lt;/code&gt; folder. Open it by text editor and set &lt;code&gt;Icon=/path/filename.svg&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case it was &lt;code&gt;Icon=/home/hp2560/Documents/appsicons/sublime-text.svg&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2633" LastEditorUserId="2708" LastEditDate="2015-11-01T11:49:41.533" LastActivityDate="2015-11-01T11:49:41.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2783" PostTypeId="1" AcceptedAnswerId="4989" CreationDate="2015-10-31T06:13:21.277" Score="0" ViewCount="1166" Body="&lt;p&gt;I have installed elementary OS freya and I am experiencing shutdown problem.&#xA;I cannot shutdown or restart my computer, to do so I have to press power button.I tried:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;shutdown -h now&#xA;shutdown -P now&#xA;shutdown from the UI&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;When I shutdown it shows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;[2969.600864] init: wait-for-state (plymouth-shutdownlightdm) main process (14172) killed by TERM signal&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to change &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; in &lt;code&gt;/etc/default/grub&lt;/code&gt;&#xA;and changed &lt;code&gt;CONCURRENCY&lt;/code&gt; to &lt;code&gt;none&lt;/code&gt; in &lt;code&gt;/etc/init.d/rc&lt;/code&gt;.&#xA;Still no luck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to press power button everytime or is there any solution for this? Secondly, is doing so safe? &lt;/p&gt;&#xA;" OwnerUserId="2941" LastEditorUserId="3757" LastEditDate="2016-05-06T08:50:12.863" LastActivityDate="2016-06-05T09:13:56.430" Title="Freya cannot shutdown. init: wait for state plymouth shutdownlightdm killed by TERM signal" Tags="|release-freya|grub|shutdown|plymouth|" AnswerCount="4" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2784" PostTypeId="2" ParentId="2783" CreationDate="2015-10-31T06:28:35.163" Score="0" Body="&lt;p&gt;Try &lt;code&gt;sudo shutdown -h &amp;lt;time in minute&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Example &lt;code&gt;sudo shutdown -h 0&lt;/code&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Try &lt;code&gt;sudo shutdown -r &amp;lt;time in minute&amp;gt;&lt;/code&gt; for reboot in time.&lt;br&gt;&#xA;Reboot can also use &lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Solution 1:&lt;br&gt;&#xA;Edit /etc/default/grub file  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;  &#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash reboot=pci&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source -- &lt;a href=&quot;http://michalorman.com/2013/10/fix-ubuntu-freeze-during-restart/&quot; rel=&quot;nofollow&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Solution 2:&lt;br&gt;&#xA;Edit /etc/default/grub file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;  &#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2888" LastEditorUserId="3757" LastEditDate="2016-02-10T15:02:17.700" LastActivityDate="2016-02-10T15:02:17.700" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2785" PostTypeId="2" ParentId="2371" CreationDate="2015-10-31T06:50:03.997" Score="3" Body="&lt;p&gt;Yes you can. &#xA;First you setup your &lt;code&gt;ibus&lt;/code&gt; by command &lt;code&gt;ibus-setup&lt;/code&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/bOIRQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bOIRQ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Chose the &lt;code&gt;Input Method&lt;/code&gt; tab.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://i.stack.imgur.com/v8bDv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v8bDv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;--&gt; &lt;code&gt;Select an input method&lt;/code&gt; --&gt; &lt;code&gt;Add&lt;/code&gt; language what do you want.&lt;br&gt;&#xA;My example is &lt;strong&gt;Vietnamese - Unikey&lt;/strong&gt; as you see in the picutre.&lt;br&gt;&#xA;&lt;strong&gt;Vietnamese&lt;/strong&gt; is language&lt;br&gt;&#xA;&lt;strong&gt;Unikey&lt;/strong&gt; is type of input&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After &lt;code&gt;Add&lt;/code&gt; language you will go to &lt;code&gt;Application&lt;/code&gt; --&gt; &lt;code&gt;System Settings&lt;/code&gt; --&gt; &lt;code&gt;Keyboard&lt;/code&gt; --&gt; &lt;code&gt;Universal Access&lt;/code&gt; &#xA;You will see the &lt;code&gt;Next Keyboard Layout&lt;/code&gt; is your shortcut to change your &lt;code&gt;ibus&lt;/code&gt;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qTvF9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qTvF9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Finally if you want to add your language in your &lt;code&gt;System Tray&lt;/code&gt; .&lt;br&gt;&#xA;Use this command &lt;code&gt;gsettings set org.gnome.desktop.input-sources sources &quot;[('xkb', 'us'), ('ibus', '**YOUR TYPE**')]&quot;​&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Example &lt;code&gt;gsettings set org.gnome.desktop.input-sources sources &quot;[('xkb', 'us'), ('ibus', 'Unikey')]&quot;​&lt;/code&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Remember Unikey is my &lt;code&gt;input&lt;/code&gt; from vietnamese . Just replace your type.&lt;/p&gt;&#xA;" OwnerUserId="2888" LastActivityDate="2015-10-31T06:50:03.997" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2786" PostTypeId="1" CreationDate="2015-11-01T05:23:57.867" Score="1" ViewCount="6238" Body="&lt;p&gt;This question sounds like exact duplicate of &lt;a href=&quot;https://askubuntu.com/questions/30032/how-safe-is-ubuntu&quot;&gt;https://askubuntu.com/questions/30032/how-safe-is-ubuntu&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May or may not, but I would like to know &lt;em&gt;How safe is elementary OS&lt;/em&gt; ?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-11-19T19:30:21.367" Title="How safe is elementary OS" Tags="|security|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2787" PostTypeId="2" ParentId="2786" CreationDate="2015-11-01T10:41:53.017" Score="-1" Body="&lt;p&gt;Don't think the answer will be way different from the mentioned one, elementary OS is Ubuntu too, and the &lt;em&gt;elementary&lt;/em&gt; community on Launchpad is on pulse with reported special security vulnerabilities :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, there are some bugs that make using the OS bit unsecure. These are, like, one that keeps out changing the layout from English on the lockscreen. Be careful if you have a password in a different character set :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My most disappointing experience was when I logged in to Geary with an iCloud mail account (2-step verification off), and the day I found the password stolen right out of the application! As a cryptography profane, I see the folks did that with a fake sertificate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: And yep, I finally reset it with the second mail account.&lt;/p&gt;&#xA;" OwnerUserId="2932" LastEditorUserId="34" LastEditDate="2015-11-19T19:03:58.273" LastActivityDate="2015-11-19T19:03:58.273" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2788" PostTypeId="2" ParentId="2781" CreationDate="2015-11-01T12:02:16.787" Score="1" Body="&lt;p&gt;Log out. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While you're in a login screen, you'll see a small gear icon next to your user name. Click on it and switch the desktop environment to Pantheon. Everything will work as expected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You didn't mess anything up. You have just selected Kodi as your default desktop environment. &lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-11-01T12:02:16.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2789" PostTypeId="1" CreationDate="2015-11-01T12:56:43.747" Score="2" ViewCount="79" Body="&lt;p&gt;I installed elementary Freya yesterday and I encountered a weird bug after rebooting. I'll try to explain it as best as I can. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I log into my session, the windows do not behave properly :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I can't click on any of the buttons, in all windows&lt;/li&gt;&#xA;&lt;li&gt;I can't get focus on another window by clicking on it&lt;/li&gt;&#xA;&lt;li&gt;I can't access the top bar (with the clock and the notification widgets) or launch an app from the dock if another window is open&lt;/li&gt;&#xA;&lt;li&gt;Keyboard shortcuts seem to work (Alt-Tab, Tab to navigate in a window...) &lt;/li&gt;&#xA;&lt;li&gt;After I log out (with Ctrl+Alt+Del) and log in again, everything works perfectly. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It seems to be a graphical issue, which is why I tried installing the NVidia proprietary drivers, but the problem persisted. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some info on my config:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/L8Ktg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L8Ktg.png&quot; alt=&quot;My config&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clément&lt;/p&gt;&#xA;" OwnerUserId="2949" LastEditorUserId="2949" LastEditDate="2015-11-01T16:05:49.100" LastActivityDate="2015-11-01T16:05:49.100" Title="Pantheon misbehaves after boot" Tags="|release-freya|wingpanel|system|graphic-drivers|window-management|" AnswerCount="0" CommentCount="5" ClosedDate="2019-02-20T16:08:14.597" ContentLicense="CC BY-SA 3.0" />
  <row Id="2790" PostTypeId="1" AcceptedAnswerId="2791" CreationDate="2015-11-01T13:19:17.753" Score="0" ViewCount="90" Body="&lt;p&gt;When I try to copy and paste a command from net I faced this warning in freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command is adding a PPA. First I thought, the warning  is with that particular web page. But the &lt;em&gt;exact&lt;/em&gt; message is when I try to copy command and try to  paste in terminal, I am getting warning message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/prv19.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-01T13:46:18.697" LastActivityDate="2015-11-01T13:46:18.697" Title="Warning message while copy&amp;paste commands from internet" Tags="|release-freya|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2791" PostTypeId="2" ParentId="2790" CreationDate="2015-11-01T13:44:14.840" Score="1" Body="&lt;p&gt;That means the command has &lt;strong&gt;sudo&lt;/strong&gt; in it, when a command that requires &lt;strong&gt;root&lt;/strong&gt; access is copy pasted, elementary os shows that warning(not an error) so if you are sure you know what the command does, hit &lt;strong&gt;paste anyway&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-11-01T13:44:14.840" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2792" PostTypeId="2" ParentId="2593" CreationDate="2015-11-01T13:55:42.177" Score="8" Body="&lt;p&gt;elementary OS uses &lt;a href=&quot;http://www.freedesktop.org/wiki/Specifications/sound-theme-spec/&quot; rel=&quot;noreferrer&quot;&gt;XDG sound themes&lt;/a&gt;. Although there isn't currently a way to change or edit them from within &lt;em&gt;Switchboard&lt;/em&gt;, it's quite easy to do manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rather than edit the default &lt;em&gt;freedesktop&lt;/em&gt; theme directly, lets create our own custom sound theme. It's really not that hard and has the benefit of being portable, meaning you can easily share it with others or back it up to transition between system upgrades etc. I will demonstrate changing the &lt;em&gt;alert&lt;/em&gt; sound from the default &lt;em&gt;drip&lt;/em&gt; to something else. I suggest skimming through the specification linked above as it explains the directory structure and mandatory file names in a lot more detail than I will. Also take a look at the default &lt;em&gt;freedesktop&lt;/em&gt; theme located in &lt;code&gt;/usr/share/sounds/freedesktop/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Creating a Custom Sound Theme&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;First we will create the basic directory / file structure-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /usr/share/sounds/custom&#xA;sudo mkdir /usr/share/sounds/custom/stereo&#xA;sudo touch /usr/share/sounds/custom/index.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then we will edit the settings of our new theme&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/sounds/custom/index.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following, taking care not to include any extra whitespaces...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Sound Theme]&#xA;Name=custom&#xA;Directories=stereo&#xA;&#xA;[stereo]&#xA;OutputProfile=stereo&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now we will copy an existing sound into our theme. By renaming it to &lt;em&gt;bell.oga&lt;/em&gt; the system automatically uses it as the system alert sound. See the specification linked above and the existing &lt;em&gt;freedesktop&lt;/em&gt; theme for more information on file naming conventions.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /usr/share/sounds/gnome/default/alerts/bark.ogg /usr/share/sounds/custom/stereo/bell.oga&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then we tell the system to use our new theme with the following command-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.sound theme-name custom&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To rese it to the default 'freedesktop' theme enter-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.sound theme-name&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;That's it! Your system alert is now obnoxious. Most likely you'll want to use a different sound. If none of the other &lt;em&gt;freedesktop&lt;/em&gt; sounds are to your liking, there are many sound themes available on &lt;a href=&quot;http://gnome-look.org/index.php?xsortmode=high&amp;amp;page=0&amp;amp;xcontentmode=25&quot; rel=&quot;noreferrer&quot;&gt;gnome-look.org&lt;/a&gt; that might have your jam. Simply copy the desired files into your &lt;code&gt;../custom/stereo/&lt;/code&gt; folder using the appropriate filenames. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have the skills and want to create your own sounds, note the specification dictates that-&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The sounds files must be one of the types: WAV/PCM 8-48kHz, 8/16 bits&#xA;  or OGG/Vorbis I. The extension must be &quot;.wav&quot;, or &quot;.oga&quot; respectively&#xA;  (in lower case). It is not recommended to use &quot;.ogg&quot; extension, but it&#xA;  is also supported for legacy reasons.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How it Works&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once our theme is enabled with the gsettings command in step 4, the system will always look for the sound files in the folders specified in your &lt;code&gt;index.theme&lt;/code&gt; file first. If it cannot find it there it will always fall back to the freedesktop theme. By doing the steps above we have ensured that it will favour our new &lt;code&gt;bell.oga&lt;/code&gt; over the default version. As there are no other sounds in our custom theme, they will be inherited from the freedesktop theme. Also note, if for example you just wanted to turn a particular sound off, create an empty file with the &lt;em&gt;.disabled&lt;/em&gt; file extension in place of a sound file. eg-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /usr/share/sounds/custom/stereo/bell.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;One last thing, I'm sure it is tempting to bypass all of the steps above and just modify the &lt;code&gt;../freedesktop/stereo/&lt;/code&gt; files directly. While it's probably harmless, it's a kludgy way to go.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-11-01T15:34:39.063" LastActivityDate="2015-11-01T15:34:39.063" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2795" PostTypeId="1" CreationDate="2015-11-02T05:18:06.940" Score="2" ViewCount="233" Body="&lt;p&gt;I just did a fresh install of Elementary OS on a Dell 13-7352. During installation the trackpad was working, but afterwards it stopped. I have tried this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get --purge autoremove xserver-xorg-input-synaptics &amp;amp;&amp;amp; sudo apt-get install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which worked previously on Ubuntu 14.04 on the same computer but had no luck. I have also tried a few other fixes but nothing seems to be working. Any other ideas?&lt;/p&gt;&#xA;" OwnerUserId="2950" LastEditorUserId="3757" LastEditDate="2016-04-14T11:08:11.490" LastActivityDate="2016-04-17T02:55:31.383" Title="Touchpad not working on Dell 13-7352" Tags="|release-freya|system-installation|touchpad|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2796" PostTypeId="1" AcceptedAnswerId="3205" CreationDate="2015-11-02T10:32:52.140" Score="2" ViewCount="91" Body="&lt;p&gt;I've installed Elementary OS 0.3.1 Freya on MacBook Pro2015 mid 15&quot; with rEFInd used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I get into touchpad setting, some GUI elements are missing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TPf3z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TPf3z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;strong&gt;Touchpad&lt;/strong&gt; section, there's nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;HOWEVER&lt;/strong&gt; if I move a mounse pointer around that empty space, GUI elements that were invisible appears:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xwzno.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xwzno.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system configuraion is:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;MacBook Pro 2015 mid 15&quot;&lt;br&gt;&#xA;  Iris 5200 Pro graphic, no external graphic&lt;br&gt;&#xA;  Elementary OS 0.3.1 Freya 64-bit&lt;br&gt;&#xA;  Based on Ubuntu 14.04.1 (Kernel: 3.19.0-26)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;And I have &lt;code&gt;grub&lt;/code&gt; set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;acpi=noirq acpi=force apm=power_off nomodeset&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Loaded modules are here: &lt;a href=&quot;https://gist.github.com/anonymous/caba4a2ff9f67f8c764f&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/anonymous/caba4a2ff9f67f8c764f&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a such issue and have fixed it?&lt;/p&gt;&#xA;" OwnerUserId="2951" LastActivityDate="2015-11-26T12:45:10.983" Title="Some GUI elements missing on MacBook Pro 2015 mid 15&quot;" Tags="|graphics|" AnswerCount="1" CommentCount="2" ClosedDate="2015-11-27T11:11:44.827" ContentLicense="CC BY-SA 3.0" />
  <row Id="2797" PostTypeId="1" CreationDate="2015-11-02T13:36:31.860" Score="2" ViewCount="101" Body="&lt;p&gt;As a Ubuntu 12.04.5 LTS user on a Samsung ATIV-Ultrabook I wanted to try elementary OS Freya as a possible alternative as it already includes the necessary wireless drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When using my Vodafone ZTE K3805-Z with Ubuntu I have to type &lt;em&gt;sudo&lt;/em&gt; &lt;em&gt;ifconfig&lt;/em&gt; &lt;em&gt;-arp&lt;/em&gt; in order to have a working internet connection.&#xA;If I try this using the USB-stick-booted elementary OS Freya the WiFi menu in the upper right edge disappears until reboot - and no internet connection...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will I be able to use it with a special &quot;hack&quot; or do I have to take Luna ?&lt;/p&gt;&#xA;" OwnerUserId="2952" LastEditorUserId="34" LastEditDate="2015-11-19T13:33:14.540" LastActivityDate="2016-09-14T19:06:27.763" Title="Vodafone Dongle Freya" Tags="|release-freya|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2798" PostTypeId="2" ParentId="2761" CreationDate="2015-11-02T14:45:10.330" Score="1" Body="&lt;p&gt;If you have an Intel chipset maybe you can try :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mesa-utils&#xA;&#xA;sudo mkdir /etc/X11/xorg.conf.d/&#xA;&#xA;echo -e 'Section &quot;Device&quot;\n Identifier &quot;Intel Graphics&quot;\n Driver &quot;Intel&quot;\n Option &quot;AccelMethod&quot; &quot;sna&quot;\n Option &quot;TearFree&quot; &quot;true&quot;\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf&#xA;&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1435861&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2953" LastActivityDate="2015-11-02T14:45:10.330" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2799" PostTypeId="2" ParentId="2776" CreationDate="2015-11-02T19:03:05.153" Score="2" Body="&lt;p&gt;You can make a copy of the original icon set you want to edit to a working folder in your &lt;code&gt;/home&lt;/code&gt; folder, then edit the name of the folder so you know it's your own custom setup.&#xA;Within this folder is an &lt;code&gt;index.theme&lt;/code&gt; file, which you can edit with your text editor of choice. At the beginning of the &lt;code&gt;index.theme&lt;/code&gt; file will be text similar to below.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Icon Theme]&#xA;Name=My-theme-name&#xA;Comment=Smooth modern theme designed to be intuitive.&#xA;&#xA;Inherits=elementary,Numix-Circle&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You want to change the theme name, typically the name you chose for the folder name.&lt;br&gt;&#xA;Notice the Inherits section, this is where you place the names of the themes you would like to include with this theme.&lt;br&gt;&#xA;The way the icon themes work is typically whatever is missing by this theme will then be Inherited by the next theme assigned in &lt;code&gt;Inherits=&lt;/code&gt;&#xA;You must use the name that is associated from within the index.theme file of designated theme(s), not the folder name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Within the folder of your main theme directory if you &lt;strong&gt;do not&lt;/strong&gt; want the icons on the panel, then find the folder(s) that are labeled &lt;code&gt;panel&lt;/code&gt; and &lt;code&gt;status&lt;/code&gt; then delete them. Also if there is no panel folder, then panel icons will usually be found in the &lt;code&gt;apps&lt;/code&gt; folder with a &lt;code&gt;-panel&lt;/code&gt; designation on the icon file. Application toolbar icons are typically in folder(s) &lt;code&gt;actions&lt;/code&gt;.  So if you do not want the action buttons of the main theme, then delete the folder(s) labeled &lt;code&gt;actions&lt;/code&gt;&#xA;This same process can be applied to individual files within each folder, if there are individual icons you do not like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have finished your edits, place the icons in &lt;code&gt;~/.icons&lt;/code&gt; first for a test run before moving them to &lt;code&gt;/usr/share/icons&lt;/code&gt; if you want the theme available to all groups/users. If you don't have a &lt;code&gt;.icons&lt;/code&gt; folder then just make one. You can leave them in &lt;code&gt;~/.icons&lt;/code&gt; as long as you assign read permissions to all groups, if you just want to use them on your account plus have them show up with sudo applications. &lt;code&gt;$ chmod -R 744 ~/.icons&lt;/code&gt; or &lt;code&gt;755&lt;/code&gt; will work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This method will work for most, if not all distributions, so making a backup of your custom theme(s) is a good idea.&lt;/p&gt;&#xA;" OwnerUserId="2956" LastEditorUserId="2956" LastEditDate="2015-11-02T20:20:04.863" LastActivityDate="2015-11-02T20:20:04.863" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2800" PostTypeId="2" ParentId="2707" CreationDate="2015-11-02T20:00:12.407" Score="5" Body="&lt;p&gt;it can't find a missing icon, for me its: /usr/share/icons/elementary/actions/16/package-install.svg&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FIX&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit file: /usr/share/icons/default/index.theme&#xA; and make sure &quot;Inherits=&quot; line includes icon theme that contains this missing iconm, eg:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Inherits=elementary,Humanity&lt;/p&gt;&#xA;" OwnerUserId="2957" LastActivityDate="2015-11-02T20:00:12.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2801" PostTypeId="1" CreationDate="2015-11-02T21:41:13.580" Score="2" ViewCount="6883" Body="&lt;p&gt;A couple of days ago I updated elementary OS through the software updater, and after restarting the laptop, the touchpad no longer worked. The mouse would not move from the center of the screen. First, I verified I did not accidentally turn off the touchpad with the hotkey. I was able to get the touchpad to work by running the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r psmouse&#xA;sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This allowed me to regain control of the mouse, however, two finger scrolling does not work. I went to the touchpad settings and checked the two finger scroll checkbox, but the change is not saved after exiting settings. Once I open the touchpad menu up again, the two finger scroll checkbox is still unchecked. Finally, the commands above are not persistent after a restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="2960" LastEditorUserId="34" LastEditDate="2015-11-19T13:26:29.790" LastActivityDate="2021-02-22T01:28:41.233" Title="Touchpad quit working after update" Tags="|settings|mouse|touchpad|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2802" PostTypeId="1" CreationDate="2015-11-02T22:03:24.633" Score="1" ViewCount="557" Body="&lt;p&gt;I have an Asus F550C laptop with touchscreen. The system recognizes when touch and it's like I was using the mouse(one click) but I can't scroll nor double-click. Is there any driver to make it work perfect or something like that? (The touchscreen works perfect in Win 10, with scrolling, double-clicking...) &lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2015-11-02T22:03:24.633" Title="Touch screen control?" Tags="|release-freya|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-28T20:39:18.943" ContentLicense="CC BY-SA 3.0" />
  <row Id="2803" PostTypeId="1" CreationDate="2015-11-03T00:44:39.360" Score="1" ViewCount="80" Body="&lt;p&gt;Cox claims that I have a Zeus trojan/bot, despite the fact that I am on Elementary and that virus is designed for windows systems. Is that possible? What should I do?&lt;/p&gt;&#xA;" OwnerUserId="2524" LastActivityDate="2015-11-03T11:31:28.977" Title="My ISP claims I have a virus" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2804" PostTypeId="2" ParentId="2803" CreationDate="2015-11-03T01:42:55.287" Score="3" Body="&lt;p&gt;&lt;strong&gt;Ignore them.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is most likely &lt;a href=&quot;http://www.zdnet.com/article/phone-scammers-target-pc-users-with-phony-virus-reports/&quot; rel=&quot;nofollow&quot;&gt;a scam&lt;/a&gt;. Very common here in Australia, usually bundled with threats that they will be &lt;em&gt;&quot;forced to disconnect your internet&quot;&lt;/em&gt; etc. If in doubt you should phone your ISP directly to confirm.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="137" LastEditDate="2015-11-03T11:31:28.977" LastActivityDate="2015-11-03T11:31:28.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2805" PostTypeId="1" CreationDate="2015-11-03T03:21:38.433" Score="2" ViewCount="417" Body="&lt;p&gt;I don't know what's wrong, it was working normally but now Chrome does not play any sound, if I go to YouTube and play a video I can't hear the sound. What could be the problem?&lt;/p&gt;&#xA;" OwnerUserId="2856" LastActivityDate="2015-11-06T05:00:08.823" Title="Chrome does not sound in Freya" Tags="|release-freya|google-chrome|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2806" PostTypeId="2" ParentId="2744" CreationDate="2015-11-03T08:27:30.193" Score="2" Body="&lt;p&gt;This is not a proper solution, just a work around so that setting dialogues work (I have the same issue). This only seems to happen with the default elementary GTK+ theme. If you switch to another theme (HighContrast is also installed by default) then the issue is gone for me. Alternatively using the default theme, but then switching to dark also works for me (that's what I use now). Forcing a re-install of elementary-theme (sudo apt-get install --reinstall elementary-theme) does not solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best way to change the GTK+ theme is using gsettings. To switch to a different GTK+ theme open a terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface gtk-theme &quot;HighContrast&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace &quot;HighContrast&quot; with the name of theme you want to use. The default theme is called &quot;elementary&quot; if you want to switch back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To switch to dark edit ~/.config/gtk-3.0/settings.ini in a text editor. For instance open a terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano ~/.config/gtk-3.0/settings.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This opens the file in nano. Replace gtk-application-prefer-dark-theme=0 with gtk-application-prefer-dark-theme=1 . Save, close the file (Ctrl + O, Enter, Ctrl + X) and log off and on for the change to take effect. If the file does not exist then create it with the following content (for dark theme):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Settings]&#xA;gtk-application-prefer-dark-theme=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2962" LastEditorUserId="2962" LastEditDate="2015-11-09T20:01:12.307" LastActivityDate="2015-11-09T20:01:12.307" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2807" PostTypeId="2" ParentId="229" CreationDate="2015-11-03T10:13:06.133" Score="-2" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will solve your problem&lt;/p&gt;&#xA;" OwnerUserId="2964" LastEditorUserId="2708" LastEditDate="2015-11-03T13:17:10.933" LastActivityDate="2015-11-03T13:17:10.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2808" PostTypeId="2" ParentId="2801" CreationDate="2015-11-03T12:30:02.467" Score="0" Body="&lt;p&gt;This might sound silly, but it worked for me until I found an updated driver for my laptop's track pad. But once you boot if your mouse isn't working, try suspending your laptop and resuming.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No guerentees, and I've not a clue why it was working this way, but it worked for me. &lt;/p&gt;&#xA;" OwnerUserId="2965" LastActivityDate="2015-11-03T12:30:02.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2811" PostTypeId="1" CreationDate="2015-11-04T00:40:48.070" Score="1" ViewCount="576" Body="&lt;p&gt;Can elementary OS be installed on a laptop that you can't disable Secure Boot?&lt;/p&gt;&#xA;" OwnerUserId="2969" LastEditorUserId="16827" LastEditDate="2019-04-16T09:25:15.620" LastActivityDate="2024-02-28T07:04:05.533" Title="Can elementary OS be installed on a laptop that you can't disable Secure Boot?" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="2812" PostTypeId="1" CreationDate="2015-11-04T01:35:45.390" Score="2" ViewCount="116" Body="&lt;p&gt;I'm a first time elementary OS user and have had few issues with it and it is by far my favorite Linux.  However, I cannot put my machine to sleep by closing the lid, or rather, I cannot wake it up as the screen that comes up upon waking is shredded and torn (distorted, in the frame buffer) and I cannot break out of X to get to a command line. Thus every time I put the machine to sleep I have to do a dirty shutdown and go through a disk check when I restart, which, in turn, I'm not even sure I'm doing right, so I touch /forcefsck and reboot again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a configuration setting I can change to avoid this issue?&lt;/p&gt;&#xA;" OwnerUserId="2970" LastEditorUserId="34" LastEditDate="2015-12-31T13:16:17.720" LastActivityDate="2015-12-31T13:16:17.720" Title="Sleep issues on Early 2008 Macbook Pro" Tags="|hardware|suspend|macintosh|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2813" PostTypeId="1" CreationDate="2015-11-04T03:01:16.570" Score="9" ViewCount="24246" Body="&lt;p&gt;I'm very worried because I forgot my password to log into my Elementary System and now I can't log in,  please help me as soon as possible. Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="2974" LastEditorUserId="15904" LastEditDate="2018-11-30T19:59:08.507" LastActivityDate="2019-10-12T16:51:07.790" Title="I forgot my password" Tags="|security|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2814" PostTypeId="2" ParentId="2813" CreationDate="2015-11-04T03:37:25.523" Score="20" Body="&lt;p&gt;&lt;strong&gt;Using recovery mode&lt;/strong&gt;:(&lt;a href=&quot;https://elementaryos.stackexchange.com/a/2818/2708&quot;&gt;using live usb/cd&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume you are the only user and the administrator of your system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To change password, hold the &lt;kbd&gt;shift&lt;/kbd&gt; key while booting live usb/cd.  If that doesn't work, hold the &lt;kbd&gt;shift&lt;/kbd&gt; key and hit &lt;kbd&gt;esc&lt;/kbd&gt; key once after BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: Use arrow keys to navigate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &lt;strong&gt;advanced options&lt;/strong&gt; --&gt; select &lt;strong&gt;recovery mode&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/CepBd.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/FDHAG.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now using the arrow keys scroll down to &lt;strong&gt;root&lt;/strong&gt; and then hit  &lt;kbd&gt;enter&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/s3unH.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should now see a prompt, something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@ravan:~#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is read-only system, so you have to remount it with write permissions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -rw -o remount /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;passwd [user_name]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enter new password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jIOSM.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when you see &lt;code&gt;passwd: password updated successfully&lt;/code&gt; then run &lt;code&gt;exit&lt;/code&gt; and select &lt;strong&gt;resume&lt;/strong&gt; option and hit &lt;kbd&gt;Enter&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="8410" LastEditDate="2017-07-14T18:56:15.430" LastActivityDate="2017-07-14T18:56:15.430" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2815" PostTypeId="1" CreationDate="2015-11-04T06:05:16.247" Score="1" ViewCount="86" Body="&lt;p&gt;Whenever my laptop goes into hibernate after inactivity it goes back to the login screen which is okay but whenever I log back in, the display starts misbehaving. When I say misbehaving, it bounces all over the place and starts duplicating itself. It rarely recovers and goes back to normal. What can I do to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details: Elementary OS is running on my laptop(Dell Inspiron 15 5548) and is the only OS in my system.&lt;/p&gt;&#xA;" OwnerUserId="2975" LastActivityDate="2015-11-04T06:05:16.247" Title="Glitch after resuming after hibernate" Tags="|release-freya|greeter|" AnswerCount="0" CommentCount="0" ClosedDate="2019-12-08T04:23:11.937" ContentLicense="CC BY-SA 3.0" />
  <row Id="2816" PostTypeId="1" AcceptedAnswerId="2817" CreationDate="2015-11-04T06:38:02.993" Score="12" ViewCount="81064" Body="&lt;p&gt;How I can open terminal with a keyboard shortcut? I can't open terminal pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; in english layout. Can I assign my own keyboard shortcuts?&lt;/p&gt;&#xA;" OwnerUserId="2977" LastEditorUserId="45" LastEditDate="2015-11-05T01:12:26.927" LastActivityDate="2015-11-05T01:12:26.927" Title="How can I open Terminal with a keyboard shortcut?" Tags="|pantheon-terminal|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2817" PostTypeId="2" ParentId="2816" CreationDate="2015-11-04T06:49:52.603" Score="18" Body="&lt;p&gt;To open terminal press &lt;kbd&gt;super&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Super key = Windows key&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To customize your shortcut key:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;strong&gt;System settings&lt;/strong&gt; -- &gt; &lt;strong&gt;Keyboard&lt;/strong&gt; --&gt; &lt;strong&gt;Applications&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZqBtz.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now  select &lt;code&gt;terminal&lt;/code&gt; on right side of window, then just press the shortcut key you want to assign. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to assign &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After highlighting &lt;code&gt;terminal&lt;/code&gt; on right side of window, press &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt;. That's it. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-04T08:01:13.613" LastActivityDate="2015-11-04T08:01:13.613" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2818" PostTypeId="2" ParentId="2813" CreationDate="2015-11-04T07:41:18.273" Score="3" Body="&lt;p&gt;&lt;strong&gt;Using live USB/CD :&lt;/strong&gt; (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/2814/2708&quot;&gt;using recovery mode&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot from live usb/cd and open terminal.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Use &lt;code&gt;gparted&lt;/code&gt; or &lt;code&gt;fdisk -l&lt;/code&gt; to identify elementary OS partition from the list.&lt;/p&gt;&#xA;&lt;p&gt;The partition is just something like &lt;code&gt;/dev/sda1&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount this somewhere (Be sure to select correct partition)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo mount /dev/sda10 /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;. In my system elementary OS partiton is &lt;code&gt;/dev/sda10&lt;/code&gt;, replace it with yours.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;. If you have a &lt;code&gt;lvm&lt;/code&gt; partiton, you need to mount it to &lt;code&gt;/mnt/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now run the following command as it is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; for d in dev sys run proc; do sudo mount --bind /$d /mnt/$d; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now become root of system,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo chroot /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set the password for the account:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; passwd [user_name]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now reboot&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y7i7O.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;sub&gt;source &lt;a href=&quot;https://askubuntu.com/a/435347/439451&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-05T04:44:33.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2819" PostTypeId="1" CreationDate="2015-11-04T11:40:08.220" Score="1" ViewCount="156" Body="&lt;p&gt;So, the problem is that my laptop (Acer Extensa 2510G) can't resume from suspend while I'm using the NVIDIA GPU mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to wake the system it shows me a little terminal cursor on a black screen, but nothing happens then. I can briefly switch to another tty but if I try to login the system hangs so I need to do the hard reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the 340.93 driver from nvidia-340-updates, the kernel version is 3.19.0-31. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I'm using the Intel mode the problem doesn't occur.&#xA;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="2981" LastActivityDate="2015-11-04T11:40:08.220" Title="Can't resume from suspend in Nvidia GPU mode" Tags="|graphic-drivers|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2820" PostTypeId="1" AcceptedAnswerId="2831" CreationDate="2015-11-04T14:09:55.807" Score="1" ViewCount="1315" Body="&lt;p&gt;This command can't auto-clean these useless files, I have to remove them by myself, what can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The result of my laptop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Del firefox-locale-en 41.0.2+build2-0ubuntu0.14.04.1 [667 kB]&#xA;Del software-properties-common 0.92.37.5 [9,370 B]&#xA;Del youtube-dl 2015.10.06.2-1~webupd8~trusty1 [581 kB]&#xA;Del software-properties-gtk 0.92.37.5 [46.8 kB]&#xA;Del linux-libc-dev 3.13.0-66.108 [775 kB]&#xA;Del firefox-locale-zh-hant 41.0.2+build2-0ubuntu0.14.04.1 [452 kB]&#xA;Del python3-apport 2.14.1-0ubuntu3.16 [75.2 kB]&#xA;Del linux-signed-generic-lts-vivid 3.19.0.31.18 [1,830 B]&#xA;Del apport 2.14.1-0ubuntu3.16 [181 kB]&#xA;Del linux-signed-image-generic-lts-vivid 3.19.0.31.18 [2,300 B]&#xA;Del firefox 41.0.2+build2-0ubuntu0.14.04.1 [41.5 MB]&#xA;Del python3-software-properties 0.92.37.5 [19.1 kB]&#xA;Del linux-headers-generic-lts-vivid 3.19.0.31.18 [2,242 B]&#xA;Del python3-problem-report 2.14.1-0ubuntu3.16 [9,884 B]&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The result of my PC:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It doesn't make sense.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it's time to reinstall the system...and StackExchange sucks at supporting Chinese...&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2015-11-06T16:35:41.243" LastActivityDate="2015-11-06T16:35:41.243" Title="apt-get autoclean doesn't clean the deb files in /var/cache/apt/archives" Tags="|apt|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="2821" PostTypeId="1" AcceptedAnswerId="2822" CreationDate="2015-11-04T14:23:39.370" Score="2" ViewCount="11984" Body="&lt;p&gt;I tried to install Git using this command &lt;code&gt;apt-get install git&lt;/code&gt;, but getting this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)&#xA;E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What's problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried these : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;sudo apt-get update&lt;br&gt;&#xA;sudo apt-get upgrade&lt;br&gt;&#xA;sudo apt-get -f install&lt;/em&gt;,  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="2977" LastEditorUserId="45" LastEditDate="2015-11-05T18:21:42.600" LastActivityDate="2016-01-22T17:41:57.407" Title="How can I run a Terminal command as &quot;root&quot;?" Tags="|release-freya|pantheon-terminal|apt|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2822" PostTypeId="2" ParentId="2821" CreationDate="2015-11-04T14:38:48.283" Score="4" Body="&lt;p&gt;The main key word/phrase to find solution is &lt;strong&gt;are you root ?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That means the command needs root privileges to run. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;code&gt;man&lt;/code&gt; page of &lt;code&gt;sudo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo allows a permitted user to execute a command as the superuser or another user, as specified&#xA;       by the security policy.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;sudo&lt;/code&gt; to run a command with root privileges.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So run &lt;code&gt;sudo apt-get install git&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-04T14:38:48.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2823" PostTypeId="2" ParentId="2797" CreationDate="2015-11-04T15:26:10.477" Score="1" Body="&lt;p&gt;I can't find a real sollution right now, but you could try automatically running the command at startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this, open Switchboard (the settings app) and click on 'Applications'.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/DkJLV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DkJLV.png&quot; alt=&quot;switchboard&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, you have to click on 'Startup' and after that, on the '+' sign in the bottom left corner. Copy and paste 'sudo ifconfig -arp' (without quotes!) in the box next to the wrench.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gj1H9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gj1H9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-04T15:26:10.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2824" PostTypeId="1" CreationDate="2015-11-04T16:21:25.993" Score="1" ViewCount="1351" Body="&lt;p&gt;Looking for confirmation if I can install elementary OS.&#xA;I've set up an empty VM in VirtualBox 5.0.8 (OSX host)&#xA;and will download the files, set up the USB stick.&#xA;It should work.  Any warnings or cautions I've missed?&lt;/p&gt;&#xA;" OwnerUserId="2985" LastEditorUserId="34" LastEditDate="2015-11-27T13:16:07.963" LastActivityDate="2015-11-27T13:16:07.963" Title="Install elementary OS as a VM in VirtualBox (OSX host)?" Tags="|virtualbox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2825" PostTypeId="2" ParentId="2824" CreationDate="2015-11-04T16:33:14.897" Score="2" Body="&lt;p&gt;You do not have to make an USB stick for installing on Virtualbox. Just download the ElementaryOS image and install a new VM in Virtualbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To create a new VM in Virtual box click the new button, select linux and Ubuntu in the initial screen. Follow the rest of the steps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope this helps&lt;/p&gt;&#xA;" OwnerUserId="2986" LastActivityDate="2015-11-04T16:33:14.897" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2826" PostTypeId="1" CreationDate="2015-11-04T16:36:12.917" Score="3" ViewCount="751" Body="&lt;p&gt;When I log in to ElementaryOS, my wallpaper spans as expected because of the tweaks I installed. However, the login screen show mirrors the displays and doesn't account for different screen resolutions. When I log in, the screen flashes multiple times as if I had just plugged in the VGA cable. Is there any way around this?&lt;/p&gt;&#xA;" OwnerUserId="2988" LastActivityDate="2015-11-29T00:52:20.770" Title="Login screen doesn't support dual monitors" Tags="|greeter|resolution|wallpaper|" AnswerCount="1" CommentCount="0" ClosedDate="2015-11-29T00:52:31.010" ContentLicense="CC BY-SA 3.0" />
  <row Id="2830" PostTypeId="2" ParentId="2824" CreationDate="2015-11-05T03:08:40.633" Score="3" Body="&lt;p&gt;If you want to install&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS as &lt;strong&gt;guest&lt;/strong&gt; on OS X ( &lt;strong&gt;host&lt;/strong&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case, you &lt;strong&gt;no need&lt;/strong&gt; to create a live usb or something to install. The only one you need is &lt;code&gt;.iso&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are instructions to install:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Create Virtual Machine &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open VBox --&gt; Select &lt;strong&gt;New&lt;/strong&gt; --&gt; click on &lt;kbd&gt;Next&lt;/kbd&gt; until you create VM.&lt;br&gt;&#xA;(If you want to do any changes to default options, you can change)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now we need to install directly from &lt;code&gt;.iso&lt;/code&gt; (to avoid creating live usb/cd)  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you have only &lt;code&gt;live usb&lt;/code&gt;, and &lt;strong&gt;no&lt;/strong&gt; &lt;code&gt;.iso&lt;/code&gt; then head straight to &lt;strong&gt;Note&lt;/strong&gt; at the bottom)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;First place &lt;code&gt;.iso&lt;/code&gt; file in a particular location. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now close Virtual Machine (not VBox) and &lt;/p&gt;&#xA;&#xA;&lt;p&gt;open &lt;strong&gt;settings&lt;/strong&gt; --&gt; &lt;strong&gt;storage&lt;/strong&gt;  --&gt; select Adds Optical Drive (green + with disk image) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;!&lt;img src=&quot;https://i.stack.imgur.com/SDKFN.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/egbwf.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Clicl on &lt;kbd&gt; Choose disk &lt;/kbd&gt; and navigate to location of &lt;code&gt;.iso&lt;/code&gt; file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;code&gt;.iso&lt;/code&gt; file and click on &lt;kbd&gt; Open &lt;/kbd&gt; and then click on &lt;kbd&gt;OK&lt;/kbd&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now close settings and &lt;strong&gt;start&lt;/strong&gt; Virtual Machine&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;VirtualBox itself does not support booting from a USB device. But there is a way, for that see &lt;a href=&quot;https://askubuntu.com/questions/693719/how-to-boot-from-a-usb-drive-in-vbox&quot;&gt;my post&lt;/a&gt; in Ask Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-14T03:09:27.540" LastActivityDate="2015-11-14T03:09:27.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2831" PostTypeId="2" ParentId="2820" CreationDate="2015-11-05T03:40:14.460" Score="1" Body="&lt;p&gt;I don't see any error in this question. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From manual of &lt;a href=&quot;http://manpages.ubuntu.com/manpages/wily/en/man8/apt-get.8.html&quot; rel=&quot;nofollow&quot;&gt;apt-get&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;autoclean&lt;/strong&gt;:   &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Like clean, autoclean clears out the local repository of retrieved&#xA;             package files. The difference is that it only removes package files&#xA;             that can no longer be downloaded, and are largely useless. This&#xA;             allows a cache to be maintained over a long period without it&#xA;             growing out of control. The configuration option&#xA;             APT::Clean-Installed will prevent installed packages from being&#xA;             erased if it is set to off.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It means &lt;code&gt;autoclean&lt;/code&gt; never clean sweep ( I mean remove &lt;strong&gt;all&lt;/strong&gt;) packages in &lt;code&gt;/var/cache/apt/archives&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In your case, there might be nothing to remove.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take my case as example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;ls -l&lt;/code&gt; in &lt;code&gt;/var/cache/archives&lt;/code&gt;   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before execution of &lt;code&gt;sudo apt-get autoclean&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:/var/cache/apt/archives$ ls -l&#xA;total 330584&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After execution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:/var/cache/apt/archives$ ls -l&#xA;total 234852&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Further more, if you execute the command you will get like this,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get autoclean&#xA;[sudo] password for ravan: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-05T03:40:14.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2833" PostTypeId="1" CreationDate="2015-11-05T06:57:21.447" Score="2" ViewCount="175" Body="&lt;p&gt;I bought a used Gigabyte Windforce R9 290 OC graphics card off eBay recently, and was wondering whether it in fact was broken or I am doing something wrong. I am not able to seem to get it working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I have the graphics card in the computer, the installer doesn't seem to load (black screen), so I take it out to install. Then I make sure I update &amp;amp; upgrade everything. I then tried rebooting with the GPU installed but again a black screen. I tried downloading the AMD proprietary drivers from their site, tried both their .deb &amp;amp; .run files and neither actually installed (likely as I didn't have the graphics card installed). So I booted with 'nomodeset' to try and get in to install drivers. This worked, although at some tiny resolution and random green flashing (like a semi-transparent layer of green). I installed the AMD for Linux (.run) driver fine, so disabled nomodeset and rebooted. Black screen again. I re-enabled nomodeset, this time it booted at the right resolution (1920x1080), except there were green flashes, especially on animating windows (haven't tried any games yet).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing Windows 10 on the computer without the graphics card and it worked fine, so installed the graphics card but then ended up with a low (1024*768) resolution, using the default Microsoft drivers. I managed to install the catalyst drivers and it work fine, but with green flashes again except much rarer (once every minute, not every time I resize a window).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My specs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i7-4790k&lt;/li&gt;&#xA;&lt;li&gt;Gigabyte Windforce R9 290 OC&lt;/li&gt;&#xA;&lt;li&gt;Samsung 850 EVO 500GB&lt;/li&gt;&#xA;&lt;li&gt;16GB HyperX DDR3&lt;/li&gt;&#xA;&lt;li&gt;EVGA 600W PSU&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="2995" LastActivityDate="2015-11-06T02:07:01.710" Title="Installing Gigabyte Windforce R9 290 OC" Tags="|release-freya|graphic-drivers|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2834" PostTypeId="2" ParentId="2405" CreationDate="2015-11-05T06:59:37.150" Score="1" Body="&lt;p&gt;&lt;strong&gt;MPV Player&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MPV Player is a free, open source, and cross-platform media player. It is based on MPlayer and mplayer2. It supports a wide variety of video file formats, audio and video codecs, and subtitle types.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mplayer2&#xA;sudo add-apt-repository ppa:mc3man/mpv-tests&#xA;sudo apt-get update&#xA;sudo apt-get install mpv &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mPDVp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mPDVp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While mpv has no official GUI, it has a small controller that is triggered by mouse movement. mpv leverages the FFmpeg hwaccel APIs to support VDPAU, VAAPI, DXVA2, VDA and VideoToolbox video decode acceleration.&lt;/p&gt;&#xA;" OwnerUserId="357" LastEditorUserId="357" LastEditDate="2015-11-05T09:12:15.513" LastActivityDate="2015-11-05T09:12:15.513" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2835" PostTypeId="2" ParentId="2783" CreationDate="2015-11-05T07:13:31.087" Score="0" Body="&lt;p&gt;By Using terminal you can simply run following commands to shutdown and restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Shutdown&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo init 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Restart&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo init 6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will be asked to enter password, after entering password you are cool.&lt;/p&gt;&#xA;" OwnerUserId="357" LastActivityDate="2015-11-05T07:13:31.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2836" PostTypeId="1" CreationDate="2015-11-05T09:41:48.503" Score="7" ViewCount="659" Body="&lt;p&gt;When I press suspend from menu. I only get black screen but I can hear disk running. *note: I've chosen encryption during installation - the whole disk as home * I've then install pm-utils and when I write sudo pm-suspsend computer freezes literally. I can't move mouse and when I try to wake it by pressing enter, it's not working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how can I provide logs since then I'm forced to cold power off computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can tell you hardware/software info:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hw: Acer Aspire v3 112p &lt;/p&gt;&#xA;&#xA;&lt;p&gt;CPU: Intel(R) Pentium(R) CPU  N3540  @ 2.16GHz&#xA;GPU is intel's integrated, lspci | grep VGA says: 00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0e)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;uname -a&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Linux rozica 3.19.0-31-generic #36~14.04.1-Ubuntu SMP Thu Oct 8 10:21:08 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="2996" LastActivityDate="2016-08-25T06:29:58.797" Title="Freya - suspend not working (As computer would freeze)" Tags="|release-freya|suspend|" AnswerCount="2" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="2837" PostTypeId="1" CreationDate="2015-11-05T12:15:32.897" Score="2" ViewCount="83" Body="&lt;p&gt;I recently changed from Arch to Elementary, and use emacs for all my programming, in Arch I had configured Caps Lock as Hyper, Windows Key as Super. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary Os through the keyboard settings I configured caps lock as Hyper, but then realized windows key seems to default to also hyper instead of super like most distros do, or at least emacs is receiving a hyper modifier when I press win key, and there's no keyboard configuration to make it super, this is basically removing a whole keyboard of possible shortcuts for emacs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something I'm missing? How can I make Win key work as super? (s-[whatever]) in emacs)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, setting caps lock as &quot;additional super&quot; does the same thing as &quot;additional hyper&quot;. Freya doesn't seem to distinguish between the two?&lt;/p&gt;&#xA;" OwnerUserId="2998" LastEditorUserId="2998" LastEditDate="2015-11-05T12:39:10.737" LastActivityDate="2015-11-05T12:39:10.737" Title="Win Key being treated as Hyper when I want it as Super" Tags="|release-freya|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="2" ClosedDate="2019-02-20T16:12:57.547" ContentLicense="CC BY-SA 3.0" />
  <row Id="2838" PostTypeId="1" AcceptedAnswerId="2876" CreationDate="2015-11-05T12:40:01.830" Score="5" ViewCount="236" Body="&lt;p&gt;Why is my notebook very hot? I installed the driver for Nvidia, but nothing changed. Ubuntu has a temperature of 40-50C with the driver and 70-80C without the driver. Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sergey@sergey-Aspire-5750G:~$ sensors&#xA;coretemp-isa-0000&#xA;Adapter: ISA adapter&#xA;Physical id 0:  +82.0°C  (high = +86.0°C, crit = +100.0°C)&#xA;Core 0:         +82.0°C  (high = +86.0°C, crit = +100.0°C)&#xA;Core 1:         +81.0°C  (high = +86.0°C, crit = +100.0°C)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2977" LastEditorUserId="15904" LastEditDate="2018-12-02T05:37:40.273" LastActivityDate="2018-12-02T05:37:40.273" Title="Why heated notebook?" Tags="|temperature|" AnswerCount="2" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="2840" PostTypeId="1" CreationDate="2015-11-05T17:06:13.040" Score="1" ViewCount="325" Body="&lt;p&gt;After changing proxy for LAN to use manual proxy, I removed it only not to be able to connect to the internet via LAN or Wifi, I searched online for similar problem and solution, but after following &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2202508&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuforums.org/showthread.php?t=2202508&lt;/a&gt; everything about internet connection disappeared, now there is no way for me to connect to the internet, I need help please&lt;/p&gt;&#xA;" OwnerUserId="2503" LastActivityDate="2015-11-05T17:06:13.040" Title="Wired and Wireless connection missing" Tags="|wifi|settings|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2841" PostTypeId="1" CreationDate="2015-11-05T18:17:27.360" Score="2" ViewCount="38" Body="&lt;p&gt;I burned several times the ISO on the USB-Stick. The times I used &lt;code&gt;dd&lt;/code&gt; I just came to a menu where I can choose the different Versions and after that it stucked in a black-screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dd if=elementaryos-freya-amd64.iso of=/dev/sdb bs=1M;sudo sync;sudo eject /dev/sdb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The times I used Unetbootin just like mentioned on the elementary website I can install elementary OS but than... in a single boot grub stucked, in a dual boot the other distro just starts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the Ubuntu ISO the dd-buring and folowing UEFI installation works without any problem. (I choosed a gpt-partition table for the harddrive)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System is a TP-X250, i3-5010U, HD5500, SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In UEFI I have the setup: UEFI only, CSM off, fasboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings&lt;/p&gt;&#xA;" OwnerDisplayName="user3001" LastEditorUserId="3757" LastEditDate="2016-03-09T19:40:01.380" LastActivityDate="2016-03-09T19:40:01.380" Title="Can't start elementary OS in UEFI-Mode from USB-Stick" Tags="|release-freya|system-installation|uefi|iso|64-bit|" AnswerCount="0" CommentCount="0" ClosedDate="2015-11-09T09:40:52.047" ContentLicense="CC BY-SA 3.0" />
  <row Id="2842" PostTypeId="1" AcceptedAnswerId="2863" CreationDate="2015-11-05T18:39:29.033" Score="1" ViewCount="854" Body="&lt;p&gt;I just installed elementary OS 0.3.1 Freya (64-bit). I have installed the Nvidia driver 352.55. I used &lt;a href=&quot;https://gist.github.com/jansanchez/ce5b0ca1c5e538f4b266&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; guide to help me install the Nvidia drivers. Afterwards I have installed Steam using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Everything seems fine so far. However when I try to start Steam I receive the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ILocalize::AddFile() failed to load file &quot;public/steambootstrapper_english.txt&quot;.&#xA;[2015-11-05 19:35:42] Startup - updater built Nov 25 2013 18:07:05&#xA;libGL: screen 0 does not appear to be DRI2 capable&#xA;libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/tls/swrast_dri.so&#xA;libGL: OpenDriver: trying /usr/lib/i386-linux-gnu/dri/swrast_dri.so&#xA;libGL: Can't open configuration file /home/mathyn/.drirc: No such file or directory.&#xA;libGL: Can't open configuration file /home/mathyn/.drirc: No such file or directory.&#xA;libGL error: No matching fbConfigs or visuals found&#xA;libGL error: failed to load driver: swrast&#xA;SteamUpdateUI: An X Error occurred&#xA;X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So far my Google searches have not yielded a solution. Does anyone know what causes this error and how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="919" LastActivityDate="2015-11-06T20:59:04.150" Title="Cannot start Steam" Tags="|release-freya|steam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2843" PostTypeId="2" ParentId="2821" CreationDate="2015-11-05T18:48:03.883" Score="1" Body="&lt;p&gt;For &lt;code&gt;apt-get install git&lt;/code&gt; you can get this result, but for other commands it cannot be. you need to use &lt;code&gt;sudo&lt;/code&gt; to run commands as a root user from another user. you can turn into root user in terminal &lt;code&gt;sudo su&lt;/code&gt; command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for your issue check whether you are running update manager or synaptic package manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you also can check the processes running as root using this command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ps -u root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then kill the program using this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo killall &amp;lt;appname&amp;gt; # Example: sudo killall synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="357" LastActivityDate="2015-11-05T18:48:03.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2844" PostTypeId="1" CreationDate="2015-11-05T20:26:15.623" Score="2" ViewCount="717" Body="&lt;p&gt;I have this problem on multiple, very different systems. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running: &#xA;System Settings&gt;Power&gt;&quot;Sleep when inactive after:&quot; &#xA;Changing from default of &quot;Never&quot; to any value, backing out, restarting logging in and letting system idle doesn't result in a sleep event. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can manually put the system to sleep and wake it up just fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see in &lt;code&gt;/etc/systemd/logind.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#IdleAction=ignore&#xA;#IdleActionSec=30min&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As the default, regardless of what I set in the power control panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise on battery the systems in question will sleep on their own with an idle time set in the system's built in power control panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug, are others having this issue??&lt;/p&gt;&#xA;" OwnerUserId="2573" LastEditorUserId="26" LastEditDate="2016-03-11T02:30:05.180" LastActivityDate="2022-01-13T09:23:01.423" Title="Automatic Suspend When Idle Doesn't Work (Sleep When Inactive After ..)" Tags="|release-freya|settings|suspend|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2845" PostTypeId="2" ParentId="2844" CreationDate="2015-11-05T20:26:15.623" Score="2" Body="&lt;p&gt;My work around, or un-elegant fix is thus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncommenting both lines in &lt;code&gt;logind.conf&lt;/code&gt; and changing &lt;code&gt;IdleAction=ignore&lt;/code&gt; -to- &lt;code&gt;#IdleAction=sleep&lt;/code&gt;, setting &lt;code&gt;IdleActionSec=30min&lt;/code&gt; to whatever time I desire, I did &lt;code&gt;=5min&lt;/code&gt;, then restarting, logging in and waiting the specified time to idle results in the system going to sleep on its own.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would appear that when the systems are plugged in, or in the case of the desktop always such, the power control panel is useless for this setting as it is simply ignored.&lt;/p&gt;&#xA;" OwnerUserId="2573" LastActivityDate="2015-11-05T20:26:15.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2846" PostTypeId="2" ParentId="2833" CreationDate="2015-11-05T21:02:24.363" Score="-2" Body="&lt;p&gt;I think all you should need to do is add the ATI repository and then run sudo apt-get update&lt;/p&gt;&#xA;" OwnerUserId="3003" LastActivityDate="2015-11-05T21:02:24.363" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2847" PostTypeId="2" ParentId="2833" CreationDate="2015-11-06T02:07:01.710" Score="1" Body="&lt;p&gt;I am using an R9 270 by Sapphire, so this may or may not apply to you.  I installed the driver by using 'additional drivers'.  I typed 'drivers' in the Applications search box and 'additional drivers' popped up.  It found &lt;code&gt;fglrx AMD/ATI proprietary drivers&lt;/code&gt;, clicked install, then rebooted. Everything is working great.  If this doesn't work you you (like you get black screen upon bootup,) you can try pressing &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt; to get to a terminal then try &lt;code&gt;sudo apt-get install fglrx&lt;/code&gt;. then &lt;code&gt;sudo reboot&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(If you ever use Ctrl+Alt+F1 to get to a terminal and need to get back to a GUI (assuming your GUI is working properly) you can press Alt+F7)  &lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-11-06T02:07:01.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2848" PostTypeId="1" AcceptedAnswerId="2855" CreationDate="2015-11-06T04:48:08.843" Score="2" ViewCount="129" Body="&lt;p&gt;i'm getting this error when i try to compile the first gtk.grid in &lt;a href=&quot;https://elementary.io/en/docs/code/getting-started#gtk-grid&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io/en/docs/code/getting-started#gtk-grid&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my code;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;int main(string[] args) {&#xA;  Gtk.init (ref args);&#xA;  var window = new Gtk.Window ();&#xA;  window.title = &quot;project4&quot;;&#xA;&#xA;  var grid = new Gtk.Grid ();&#xA;  grid.orientation = Gtk.Orientation.VERTICAL;&#xA;  grid.add (new Gtk.Label (&quot;Label 1&quot;));&#xA;  grid.add (new Gtk.Label (&quot;Label 2&quot;));&#xA;&#xA;  this.add (grid);&#xA;&#xA;  window.show_all ();&#xA;  Gtk.main ();&#xA;  return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: when i change &quot;this.add (grid);&quot; for &quot;window.add (grid);&quot; my compilation works without any error and i run the application with &quot;./&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it correct?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9pHPt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9pHPt.png&quot; alt=&quot;output&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="281" LastEditorUserId="75" LastEditDate="2015-11-06T12:46:44.457" LastActivityDate="2015-11-06T13:03:58.610" Title="Getting started with gtk.grid with error" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2849" PostTypeId="2" ParentId="2805" CreationDate="2015-11-06T05:00:08.823" Score="2" Body="&lt;p&gt;Is there any sound that your computar can play?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;note, there is a sound setting where the application that play sound can be activated or desactivated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/I54UO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I54UO.png&quot; alt=&quot;Sound setting&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="281" LastActivityDate="2015-11-06T05:00:08.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2850" PostTypeId="1" CreationDate="2015-11-06T06:56:06.417" Score="1" ViewCount="159" Body="&lt;p&gt;I Currently has Fedora 23 running on a Macbook Pro 2009.  Works great, but I miss elementary OS, which I use daily on my tower.  I used &lt;code&gt;dd&lt;/code&gt; to create a bootable USB of Ubuntu 15.04 and when I restart the mac and hold down the option key, the Ubuntu USB is recognized and I can boot into Ubuntu from the USB.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the same dd command with the elementary OS freya .iso:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=elementaryos-stable-0.3.1-amd64.20150903.iso of=/dev/sdb bs=1M&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after than finished, I rebooted and held down the option key and only see my Fedora drive pop up.  I then tried a different USB as well as an external USB HDD, all of which never show up when holding down the option key on reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also note, I tried these elementary USBs on a Windows box I have and all USBs showed up, and were able to boot correctly into elementary OS from the USBs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question is, is there a way to get a macbook to boot from USB into elementary OS freya?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, does anyone know what Ubuntu's ISO has that allows it to be recognized on mac hardware that other Linux distros might not have?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2019-08-29T08:02:45.410" Title="2009 macbook pro boots Ubuntu USB but not elementary OS USB?" Tags="|release-freya|system-installation|ubuntu|usb-drive|" AnswerCount="1" CommentCount="0" ClosedDate="2019-10-22T03:19:12.397" ContentLicense="CC BY-SA 3.0" />
  <row Id="2851" PostTypeId="2" ParentId="2842" CreationDate="2015-11-06T07:11:35.073" Score="2" Body="&lt;p&gt;Did you do a reboot after installing via&#xA;&lt;code&gt;sudo apt-get install steam&lt;/code&gt; ?&#xA;I found I after I installed steam via apt-get, I had to do a reboot, then open a terminal and type &lt;code&gt;steam&lt;/code&gt; . The client would open and begin updating for a couple of minutes. After updates were installed, I rebooted again and was able to click the icon to launch Steam.  All attempts to launch steam prior to reboot and running &lt;code&gt;steam&lt;/code&gt; from the command line gave me errors.&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-11-06T07:11:35.073" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2852" PostTypeId="2" ParentId="2821" CreationDate="2015-11-06T10:37:28.263" Score="2" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then just type your password (invisible). I also installed git with elementary, the same as Ubuntu and works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you can use the root command &lt;strong&gt;su&lt;/strong&gt; (not recomended) instead of &lt;strong&gt;sudo&lt;/strong&gt; but you need to create a password for use su with &lt;strong&gt;sudo passwd root&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="2980" LastEditorUserId="2980" LastEditDate="2015-11-10T10:46:43.823" LastActivityDate="2015-11-10T10:46:43.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2853" PostTypeId="1" CreationDate="2015-11-06T12:51:37.577" Score="0" ViewCount="89" Body="&lt;p&gt;i know this is a newbie question but i am a newbie to this OS, i heard from my some sort of friend that if i donate a certain money to elementary OS community you will receive a SPECIAL VERSION of elementary i just wanted to know that is it true? or not?because I paid and no download happened - how can I fix this? I followed the basic capture routine of Open OS that you can't download without a Credit Card.!&lt;/p&gt;&#xA;" OwnerUserId="3005" LastActivityDate="2015-11-06T13:16:51.630" Title="Paid Version?Is it Real?" Tags="|release-freya|elementary-website|download|" AnswerCount="0" CommentCount="1" FavoriteCount="0" ClosedDate="2015-11-09T09:44:21.083" ContentLicense="CC BY-SA 3.0" />
  <row Id="2854" PostTypeId="2" ParentId="2391" CreationDate="2015-11-06T12:55:29.127" Score="2" Body="&lt;p&gt;You are of course not required to pay. If you did the devs will surely appreciate though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your question gives almost no details on what problem you are facing. If you did not see the window with the links to download the torrent files, you can just go to &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io&lt;/a&gt;, enter $0 and click the &quot;Download&quot; button&lt;/p&gt;&#xA;" OwnerUserId="3006" LastActivityDate="2015-11-06T12:55:29.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2855" PostTypeId="2" ParentId="2848" CreationDate="2015-11-06T13:03:58.610" Score="2" Body="&lt;p&gt;It looks like the docs are a bit unclear about this. Your fix is absolutely correct. You want to add your &lt;code&gt;Gtk.Grid&lt;/code&gt; to a &lt;code&gt;Gtk.Window&lt;/code&gt; as the window's widget. By using &lt;code&gt;window.add (grid)&lt;/code&gt; you're doing exactly that, so it's fine that way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now let's talk about what the docs are actually trying to say in the paragraph about GtkGrid. Most of the time, you don't want to create a &lt;code&gt;Gtk.Window&lt;/code&gt; object. You want to create a custom class based on &lt;code&gt;Gtk.Window&lt;/code&gt; which configures the &lt;code&gt;Gtk.Window&lt;/code&gt;-specific attributes and adds all your widgets. Take a look at how Pantheon Calculator is doing it: &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-calculator/trunk/view/head:/src/MainWindow.vala&quot; rel=&quot;nofollow&quot;&gt;This is the MainWindow-class&lt;/a&gt;. It's a class which inherits &lt;code&gt;Gtk.Window&lt;/code&gt; and handles all the logic inside its &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-calculator/trunk/view/head:/src/MainWindow.vala#L51&quot; rel=&quot;nofollow&quot;&gt;constructor&lt;/a&gt;. The custom window is used &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-calculator/trunk/view/head:/src/PantheonCalculator.vala&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; which is a &lt;code&gt;Granite.Application&lt;/code&gt; created by the &lt;code&gt;main&lt;/code&gt; function.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;this&lt;/code&gt; is always referring to the current class you're in - so you can only use &lt;code&gt;this.add (...)&lt;/code&gt; when you're actually &lt;em&gt;in the &lt;code&gt;Gtk.Window&lt;/code&gt;&lt;/em&gt; you're using.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might notice the linked class actually doesn't use &lt;code&gt;this&lt;/code&gt;. Why? Because you can call a function inside a class and it will look for a function named that way in your class and inherited classes. That's why you can simply use &lt;code&gt;add (...)&lt;/code&gt; in your window class as well. However, using &lt;code&gt;this&lt;/code&gt; might be a nice rule because you are always aware of the function's context you just called.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-11-06T13:03:58.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2856" PostTypeId="2" ParentId="2391" CreationDate="2015-11-06T13:16:51.630" Score="5" Body="&lt;p&gt;There is no special version of elementary OS only for paying users (and there will never be one). The payment is a pay-what-you-want thing which allows you to pay $0. Your payment is entirely voluntary to support the development of elementary OS. Just type in $0 in the &quot;custom amount&quot; box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore, if you paid and didn't get a download, re-try it with $0. It will not make any difference. However you might consider to open a bug report at &lt;a href=&quot;https://github.com/elementary/mvp&quot; rel=&quot;noreferrer&quot;&gt;elementary.io's GitHub page&lt;/a&gt; to let the developers know there is something wrong with the paid download.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-11-06T13:16:51.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2858" PostTypeId="1" AcceptedAnswerId="2859" CreationDate="2015-11-06T14:09:25.960" Score="6" ViewCount="1670" Body="&lt;p&gt;I remember that I used this trick a while ago, but can't remember the command I've used. Basically, I've set Hot Corner shortcut to &quot;Execute custom command&quot;, and then typed in the command similar to &lt;code&gt;minimize-all&lt;/code&gt; or &lt;code&gt;show-all&lt;/code&gt; or something like that (neither one of those is the correct one). Can someone suggest what is the correct command for minimizing all the applications?&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2015-11-11T17:38:37.947" Title="How can I set Hot Corners shortcut to minimize all applications?" Tags="|settings|show-desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2859" PostTypeId="2" ParentId="2858" CreationDate="2015-11-06T15:52:29.800" Score="7" Body="&lt;p&gt;I haven't used commands you mentioned. but here is the solution for what you are asking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;first you need to install wmctrl.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then here is the command for minimize.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this one is for restore all windows.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hope this will solve your problem. cheers!!&lt;/p&gt;&#xA;" OwnerUserId="357" LastActivityDate="2015-11-06T15:52:29.800" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2860" PostTypeId="1" AcceptedAnswerId="2869" CreationDate="2015-11-06T19:48:17.917" Score="10" ViewCount="4423" Body="&lt;p&gt;The auto transparent/solid topbar (wingpanel) in elementary OS Freya is awesome! But I'd like to keep it always transparent if the wallpaper allows it. Currently if the wallpaper allows topbar transparency but you maximize a windows, then topbar becomes solid (black). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to keep it transparent even with maximized windows if wallpapers allows it?&lt;/p&gt;&#xA;" OwnerUserId="2856" LastEditorUserId="34" LastEditDate="2015-12-14T16:23:07.363" LastActivityDate="2022-10-21T04:18:14.283" Title="Keep topbar transparent on maximized windows" Tags="|wingpanel|themes|settings|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2861" PostTypeId="1" CreationDate="2015-11-06T19:56:05.583" Score="1" ViewCount="211" Body="&lt;p&gt;Just wondering if there is a netinstall version of elementary OS that can fit on a CD-R? If so, where can I download the ISO?&lt;/p&gt;&#xA;" OwnerUserId="591" LastActivityDate="2015-11-23T07:51:35.050" Title="Netinstall version of elementary OS freya?" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="2" ClosedDate="2016-10-02T14:29:51.870" ContentLicense="CC BY-SA 3.0" />
  <row Id="2863" PostTypeId="2" ParentId="2842" CreationDate="2015-11-06T20:59:04.150" Score="1" Body="&lt;p&gt;I found a solution. I uninstalled Steam and then used the download at the official Steam website to install. This fixed my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe the apt-get package is outdated?&lt;/p&gt;&#xA;" OwnerUserId="919" LastActivityDate="2015-11-06T20:59:04.150" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2864" PostTypeId="1" CreationDate="2015-11-06T21:50:32.700" Score="1" ViewCount="580" Body="&lt;p&gt;I'm having troubles with my display and graphics drivers.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Can't get my resolution higher than &quot; 1024 * 768 &quot; while my native resolution should be 1980 * 1080. Also it says that it can't recognize my display &quot;Unknown display&quot;.&lt;/li&gt;&#xA;&lt;li&gt;I have nvidia GeForce 760 oc grapchics card. But as soon I install required drivers and restart my computer it gets ACPI or APCI failed error and leaves me with a black screen.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Would appreciate any help, because I'm not going to use it if it stays like this. Still got my win 8 disk laying around here somewhere :/ Help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I will take a look at this thread from time to time, but I use another gmail &quot;lukasblog18@gmail.com&quot;, if you can help me out use this gmail to contact me. &lt;/p&gt;&#xA;" OwnerUserId="3012" LastActivityDate="2015-11-06T21:50:32.700" Title="Unknown display, low resolution, black screen, nvidia drivers problems" Tags="|display|resolution|drivers|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2865" PostTypeId="1" CreationDate="2015-11-06T21:53:20.897" Score="2" ViewCount="8882" Body="&lt;p&gt;I installed elementary OS on Virtual Box. My prime OS is Windows 8.1. So after the installation I tried to change the resolution, but the only resolution available was 640x480. I tried to insert Guest addition, but it gives me this error. &lt;a href=&quot;https://i.stack.imgur.com/7l4Cm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7l4Cm.png&quot; alt=&quot;This Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3013" LastEditorUserId="3757" LastEditDate="2016-04-22T11:35:51.190" LastActivityDate="2016-04-22T11:35:51.190" Title="Can't change elementary OS resolution on Virtual Box" Tags="|virtualbox|" AnswerCount="1" CommentCount="3" ClosedDate="2015-11-07T04:13:23.080" ContentLicense="CC BY-SA 3.0" />
  <row Id="2866" PostTypeId="2" ParentId="2865" CreationDate="2015-11-06T23:05:49.197" Score="0" Body="&lt;p&gt;Solved this just now on a Mac host in Virtualbox 5.0.8 by&#xA;in terminal for host:&#xA;VBoxManage setextradata global GUI/MaxGuestResolution any&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then in terminal for guest:  all the steps set out at&#xA; &lt;a href=&quot;http://www.binarytides.com/install-virtualbox-guest-additions-elementary-os-luna/&quot; rel=&quot;nofollow&quot;&gt;install-virtualbox-guest-additions-elementary-os&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;required some small experience with using the terminal, reading the text to understand what it was telling me to do about installing dependencies and removing unneeded or broken things.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;got used a lot, probably more than necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once I did that, screen sizes are available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I went to the Files window and tried to change from icons to list and everything froze and I had to power cycle the VM, but it seems to still work after restarting it.&lt;/p&gt;&#xA;" OwnerUserId="3015" LastEditorUserId="2708" LastEditDate="2015-11-07T09:39:30.403" LastActivityDate="2015-11-07T09:39:30.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2867" PostTypeId="2" ParentId="2706" CreationDate="2015-11-06T23:23:48.553" Score="-1" Body="&lt;p&gt;Hit the same problem several times while trying to install elementary OS for the first time and fiddling to get window size other than VGA -- Mac OS host with Virtualbox -- and the advice above did work for me:   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;from Terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -h now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and to reboot &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once I got the installation and updates and window size fix working, the normal shutdown and restart pulldown menus work fine.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did hang the VM once since then, by trying to change Files view from Icons to List -- had to power cycle again because terminal/mouse/keyboard weren't live.&lt;/p&gt;&#xA;" OwnerUserId="2985" LastEditorUserId="45" LastEditDate="2015-11-08T00:25:11.280" LastActivityDate="2015-11-08T00:25:11.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2868" PostTypeId="1" AcceptedAnswerId="2879" CreationDate="2015-11-07T01:14:56.590" Score="5" ViewCount="239" Body="&lt;p&gt;There a lot of great themes for gnome and unity and mint, but I was wondering will they work fine if I install them on Elementary OS which on running on Pantheon session.&lt;/p&gt;&#xA;" OwnerUserId="3013" LastEditorUserId="45" LastEditDate="2015-11-07T17:34:39.393" LastActivityDate="2015-11-07T17:34:39.393" Title="Are all GTK 2.0 or GTK 3.0 themes compatible with all desktop environments?" Tags="|themes|gtk|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2869" PostTypeId="2" ParentId="2860" CreationDate="2015-11-07T03:47:02.600" Score="6" Body="&lt;p&gt;You can run these commands from terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.wingpanel auto-adjust-alpha false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that will do it but if you want to adjust the transparency&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.wingpanel background-alpha 0.3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;strong&gt;background-alpha&lt;/strong&gt; key can be any value between 0 and 1, and if you have dconf editor you can use it to adjust the keys too.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-11-07T03:47:02.600" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2870" PostTypeId="1" AcceptedAnswerId="2950" CreationDate="2015-11-07T04:43:40.627" Score="4" ViewCount="1703" Body="&lt;p&gt;How can I change the icon for an specified app? I have installed Dota 2 but it shows Steam icon instead of Dota 2 icon, the right Doat 2 icons is shown when the game is running but not in plank. How can I change or fix this?&lt;/p&gt;&#xA;" OwnerUserId="2856" LastActivityDate="2017-11-22T16:08:28.107" Title="Change specified app's icon" Tags="|applications|plank|icons|settings|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2872" PostTypeId="1" CreationDate="2015-11-07T05:35:23.877" Score="1" ViewCount="216" Body="&lt;p&gt;Good day! I'm already connected to a wired network. I can ping websites and can access router through browser. But when i try to surf it always prompt a message that i cant access internet. Can someone help me for this problem? Thank you. Sorry for my grammar and i hope you understand&lt;/p&gt;&#xA;" OwnerUserId="3016" LastEditorUserId="3757" LastEditDate="2016-05-06T08:54:52.927" LastActivityDate="2016-05-06T08:54:52.927" Title="elementary OS Freya cant access internet" Tags="|internet|ethernet|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2874" PostTypeId="1" AcceptedAnswerId="2875" CreationDate="2015-11-07T12:22:10.923" Score="1" ViewCount="2252" Body="&lt;p&gt;I am using elementary OS freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to share files and folders between host and guest in virtual box ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS- Host / elementary OS- Guest&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-07T12:22:10.923" Title="How to share files and folders between host and guest in virtual box?" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2875" PostTypeId="2" ParentId="2874" CreationDate="2015-11-07T12:22:10.923" Score="1" Body="&lt;p&gt;Instructions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;em&gt;Guest Additions&lt;/em&gt; in virtual box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/903/how-do-you-install-virtualbox-extensions-in-elementary-os/2725#2725&quot;&gt;here&lt;/a&gt; for Installation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install extension pack. Download &lt;a href=&quot;http://download.virtualbox.org/virtualbox/5.0.8/Oracle_VM_VirtualBox_Extension_Pack-5.0.8-103449.vbox-extpack&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;. After installation, &lt;em&gt;right-click&lt;/em&gt; on downloaded file and select &lt;em&gt;open with Oracle VM virtual box&lt;/em&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/37MVp.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;3.Create a folder in &lt;strong&gt;host&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I  will create a folder &lt;code&gt;SHARE&lt;/code&gt; in &lt;code&gt;home&lt;/code&gt; directory.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Goto VirtualBox &lt;strong&gt;settings&lt;/strong&gt;--&gt; &lt;strong&gt;shared folders&lt;/strong&gt; --&gt; &lt;em&gt;Adds new shared folder&lt;/em&gt; ( folder sign with green +)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/rXAwI.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: If the Virtual Machine already running, you will have &lt;code&gt;make permanent&lt;/code&gt; option. If the Virtual Machine is not running already you will have only other two options. (I mentioned this point to avoid confusion, like, &lt;em&gt;how his VBox has &lt;code&gt;make permanent&lt;/code&gt; option&lt;/em&gt; o_O )&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now open Virtual Machine (guest) then open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo adduser [user_name] vboxsf&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Example&lt;/em&gt; : &lt;code&gt;sudo adduser ravan vboxsf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now open &lt;em&gt;files&lt;/em&gt; --&gt; &lt;em&gt;file system&lt;/em&gt; --&gt; &lt;em&gt;media&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you will have your &lt;code&gt;SHARE&lt;/code&gt; folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KfcAV.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-07T12:22:10.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2876" PostTypeId="2" ParentId="2838" CreationDate="2015-11-07T13:33:59.757" Score="3" Body="&lt;p&gt;First, update your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then we are going to install some packages that work really well with this issues. But first we need to remove laptop-mode-tools (if you didn't install it just go to the next step):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove laptop-mode-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, we have to install TLP:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linrunner/tlp &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install tlp tlp-rdw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And also install thermald:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install thermald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, reboot your system and you are done!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: I don't know what driver you've installed. If this doesn't work, the easy way to solve it would be reinstalling elementary OS and then installing again TLP and thermald.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html&quot; rel=&quot;nofollow&quot;&gt;TLP&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/PowerManagement/ThermalIssues&quot; rel=&quot;nofollow&quot;&gt;Thermald&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="34" LastEditDate="2015-12-31T13:55:56.010" LastActivityDate="2015-12-31T13:55:56.010" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="2878" PostTypeId="2" ParentId="2868" CreationDate="2015-11-07T13:56:39.523" Score="3" Body="&lt;p&gt;It depends on the theme. Some themes are designed specifically for a desktop environment so it won't look so good when you try to apply it in another distro. You should just try, you can even make small fixes and share it with the community :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2015-11-07T13:56:39.523" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2879" PostTypeId="2" ParentId="2868" CreationDate="2015-11-07T14:22:08.513" Score="5" Body="&lt;p&gt;No. There are some themes that are specifically for ubuntu's desktop unity for example, and that works on elementary but it doesn't look good, some features aren't shown, some parts look broken. You should look for Elementary themes.. Also you should pay attention if the themes are designed for Freya or Luna because they are not compatible.&lt;/p&gt;&#xA;" OwnerUserId="1139" LastActivityDate="2015-11-07T14:22:08.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2882" PostTypeId="1" CreationDate="2015-11-07T17:35:31.720" Score="2" ViewCount="52" Body="&lt;p&gt;I have a problem that makes elementary OS unable to start pantheon; it just stays showing the wallpaper in the lockscreen after I write my password.&#xA;It all started when the Wingpanel became a little bit buggy just after booting; it didn't show the icons or the time for some minutes. I decided to uninstall and reinstall it, and my user never started again. Need some help.&lt;/p&gt;&#xA;" OwnerUserId="3023" LastEditorUserId="2708" LastEditDate="2015-11-07T18:04:23.920" LastActivityDate="2015-11-07T18:04:23.920" Title="How can I recover the Wingpanel?" Tags="|wingpanel|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-18T11:29:47.790" ContentLicense="CC BY-SA 3.0" />
  <row Id="2883" PostTypeId="1" AcceptedAnswerId="2884" CreationDate="2015-11-07T17:45:14.130" Score="9" ViewCount="17871" Body="&lt;p&gt;I am using elementary OS freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change icon of a specific application in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible ?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2015-11-07T18:06:05.790" LastActivityDate="2019-04-29T06:01:36.243" Title="How can I change the icon of an application in the elementary OS" Tags="|themes|icons|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2884" PostTypeId="2" ParentId="2883" CreationDate="2015-11-07T17:45:14.130" Score="6" Body="&lt;p&gt;&lt;strong&gt;GUI&lt;/strong&gt; method to change icon of an application:(Using &lt;code&gt;nautilus&lt;/code&gt; and &lt;code&gt;Main menu&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Method 1&lt;/strong&gt; : Using &lt;code&gt;alacarte&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;em&gt;Main menu&lt;/em&gt; (AKA &lt;code&gt;alacarte&lt;/code&gt;) &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/L0ZHt.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;em&gt;Main menu&lt;/em&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on a program and select &lt;strong&gt;properties&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on app &lt;em&gt;icon&lt;/em&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Browse for new icon and select &lt;kbd&gt;open&lt;/kbd&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Close program &lt;em&gt;properties&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;close &lt;em&gt;Main menu&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Method 2&lt;/strong&gt;: Using &lt;code&gt;nautilus&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;First we need to install &lt;code&gt;nautilus&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gnome3-team/gnome3&#xA;sudo apt-get update&#xA;sudo apt-get install nautilus&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nautilus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will open your home directory.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now navigate to &lt;code&gt;usr/share/applications/&amp;lt;what_ever_app&amp;gt;&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Right click on the app --&gt; select properties --&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now &lt;em&gt;click&lt;/em&gt; on app icon --&gt; Now navigate to the location of required icon and select, then close.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For example&lt;/strong&gt;: I will change &lt;code&gt;icon&lt;/code&gt; for &lt;code&gt;camera&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on &lt;code&gt;camera&lt;/code&gt; icon&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xJ7jP.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I have a pic in &lt;code&gt;Downloads&lt;/code&gt; folder. So navigate to that folder and change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After,&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZWKFl.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2yThL.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why should we use &lt;em&gt;root&lt;/em&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't use &lt;code&gt;root&lt;/code&gt; there will be lock to icon, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Aklgw.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt; source for &lt;a href=&quot;https://askubuntu.com/questions/551627/problem-changing-icons-in-ubuntu-14-04&quot;&gt;method 1&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-08T03:19:23.070" LastActivityDate="2015-11-08T03:19:23.070" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="2885" PostTypeId="2" ParentId="2883" CreationDate="2015-11-07T17:47:29.130" Score="3" Body="&lt;p&gt;To Change &lt;strong&gt;specific App&lt;/strong&gt; icon:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I suppose, the icon which you want to place is &lt;code&gt;~/Downloads/[image.png]&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano /usr/share/applications/[appname].desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; : If you don't know exact app name, use &lt;code&gt;ls -l&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Now replace &lt;code&gt;Icon=[path]&lt;/code&gt; with &lt;code&gt;Icon=/home/[username]/Downloads/[image].png&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now save and exist.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-08T09:09:59.033" LastActivityDate="2015-11-08T09:09:59.033" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2886" PostTypeId="1" CreationDate="2015-11-08T03:02:37.570" Score="1" ViewCount="33" Body="&lt;p&gt;I have a Wing IDE icon in Plank. but a second fuzzy icon appears every time the IDE is opened:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;enter image description here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[![Not open][1]][1]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8YaxO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8YaxO.png&quot; alt=&quot;When I open Wing IDE&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that is like chrome icon bug. I need modify this file, but I don't know how&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jRqKa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jRqKa.png&quot; alt=&quot;file&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3026" LastActivityDate="2015-11-08T03:02:37.570" Title="Duplicate icon of Wing IDE" Tags="|plank|icons|" AnswerCount="0" CommentCount="2" ClosedDate="2015-11-15T02:18:38.017" ContentLicense="CC BY-SA 3.0" />
  <row Id="2889" PostTypeId="2" ParentId="2474" CreationDate="2015-11-08T19:48:30.870" Score="0" Body="&lt;p&gt;Most likely the problem arises from the use of unstable repository &lt;strong&gt;ppa:elementary-os/daily&lt;/strong&gt;. If you have no pressing need to use it, it is better to disable it. Install and use ppa-purge:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, you can remove unneeded packages (this is not required, but the packages are not needed when using a stable repository):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge apport apport-gtk apport-hooks-elementary apport-symptoms elementary-os-prerelease elementaryos-report-problem-dockitem evolution-data-server-google2 evolution-data-server-outlook evolution-data-server-pantheon-online-accounts fonts-opendyslexic gsignond gsignond-extension-pantheon gsignond-plugin-lastfm gsignond-plugin-oauth libaccounts-glib0 libgsignon-glib1 libgsignond-common0 libpantheon-online-accounts0 pantheon-online-accounts-plugin-lastfm python3-apport python3-problem-report screenshot-tool switchboard-plug-a11y switchboard-plug-mouse-touchpad switchboard-plug-networking switchboard-plug-parental-controls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to avoid problems, before you perform these commands, I recommend to use &lt;a href=&quot;https://elementaryos.stackexchange.com/a/675&quot;&gt;TimeShift&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-08T19:48:30.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2890" PostTypeId="1" CreationDate="2015-11-09T08:35:21.570" Score="1" ViewCount="427" Body="&lt;p&gt;Why after i installed elementary-tweaks, Synaptic Package Manager and Gdebi Package Installer my Log-in theme being changed look like Old ubuntu Log-in theme? then there are 2 calculators on my elementary OS freya. any idea please?&lt;/p&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="3757" LastEditDate="2016-05-05T07:11:14.660" LastActivityDate="2016-05-05T07:11:14.660" Title="elementary OS Freya" Tags="|themes|" AnswerCount="0" CommentCount="7" ClosedDate="2015-11-17T18:53:53.290" ContentLicense="CC BY-SA 3.0" />
  <row Id="2891" PostTypeId="1" CreationDate="2015-11-09T10:29:51.273" Score="1" ViewCount="252" Body="&lt;p&gt;I know that on my other ubuntu installations (kubuntu, lubuntu, xubuntu and mint) there was this neat little tweak on by default where when my cursor is hovering the battery indicator icon, i could dim or brighten my laptop display with my mousewheel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sadly, in elementary os it seems this is deactivated. How can I activate it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using elementary OS 0.3.1 Freya (64-bit) (Ubuntu 14.04)&lt;/p&gt;&#xA;" OwnerUserId="3036" OwnerDisplayName="Dan von Dante" LastActivityDate="2016-10-02T08:16:13.980" Title="Dim screen with battery indicator and mousewheel on elementary os" Tags="|brightness|battery|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2892" PostTypeId="1" CreationDate="2015-11-09T19:29:48.963" Score="1" ViewCount="100" Body="&lt;p&gt;After trying out kde (&lt;code&gt;kubuntu-desktop&lt;/code&gt;) on my elementary OS Frey installation, I uninstalled KDE again and went back to pantheon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, whenever I open a context menu in one of the elementary apps, the app crashes. It works fine in pidgin, firefox, etc. Also, other users on the same system (tried the guest account) are not affected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How would I begin to debug this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running the app from a terminal with &lt;code&gt;-d&lt;/code&gt; enabled just segfaults. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From dmesg:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[17917.893949] pantheon-termin[12168]: segfault at 0 ip           (null) sp 00007ffed8c28e68 error 14 in pantheon-terminal[400000+29000]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3040" LastActivityDate="2015-11-09T19:29:48.963" Title="elementary programs crash when opening context menus" Tags="|release-freya|" AnswerCount="0" CommentCount="0" ClosedDate="2019-12-08T04:18:52.890" ContentLicense="CC BY-SA 3.0" />
  <row Id="2894" PostTypeId="1" AcceptedAnswerId="4415" CreationDate="2015-11-09T20:32:24.557" Score="4" ViewCount="18329" Body="&lt;p&gt;I've tried to install elementary OS alongside Windows 10 in a UEFI machine. I first did it with Secure Boot enabled, using the &quot;something more&quot; option. I created the boot, root and swap partitions as I always do. But the strange thing is, when the installation ended and the machine was rebooted, Grub did not showed up and Windows was loaded instead. Then I retried disabling Secure Boot, and the same thing happened, so I loaded the live CD and reinstalled and updated grub from a chrooted partition as seen here: same result. I get the same results with Ubuntu 15.10. Same thing trying the option &quot;Install alongside Windows&quot; instead of &quot;Something more&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, I followed &lt;a href=&quot;http://www.instructables.com/id/Dual-Boot-Ubuntu-and-Windows-8-UEFI/&quot; rel=&quot;nofollow&quot;&gt;this tutorial&lt;/a&gt; with no luck. Basically, I disabled Secure Boot and Fast Startup, created all neccessary partitions and installed elementary. No repairing tools like EasyBCD or Boot Manager have been useful so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone point me in the rigth direction? What am I missing here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My machine is an Alienware X51 R3 with a Samsung’s PM851 M.2 SSD and Windows 10 installed. I have previously succeded double-booting Windows 10 + Elementary OS in an Alienware X51 R2 and a Samsung EVO 840 SSD.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="3757" LastEditDate="2016-05-06T14:05:21.950" LastActivityDate="2020-03-03T03:52:02.613" Title="GRUB not showing after installing Elementary OS alongside Windows 10" Tags="|dual-boot|uefi|" AnswerCount="4" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2897" PostTypeId="1" AcceptedAnswerId="2975" CreationDate="2015-11-09T22:59:28.117" Score="2" ViewCount="317" Body="&lt;p&gt;The only thing that has been bugging me with ElementaryOS is the Terminal. Attempting to type into the Terminal works just fine, but when I try and use Vim or a REPL and the output spans multiple lines, the editing of the text in that Terminal slows to a crawl.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In addition, attempting to remove characters will end up causing the cursor to appear one place to the right than it actually is, which means pressing backspace when the cursor is over a white space will actually delete the letter next to the whitespace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't have this issue with &lt;code&gt;gnome-terminal&lt;/code&gt; or &lt;code&gt;xterm&lt;/code&gt;; it's only the Pantheon Terminal that appears to have this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It makes editing with vim a pain, and for some reason I can't snap &lt;code&gt;gnome-terminal&lt;/code&gt; to the dock either.&lt;/p&gt;&#xA;" OwnerUserId="3043" LastEditorUserId="3043" LastEditDate="2015-12-31T20:07:39.763" LastActivityDate="2015-12-31T20:07:39.763" Title="Incredibly slow Terminal when modifying characters" Tags="|release-freya|plank|pantheon-terminal|" AnswerCount="1" CommentCount="2" ClosedDate="2015-11-17T18:40:11.470" ContentLicense="CC BY-SA 3.0" />
  <row Id="2898" PostTypeId="2" ParentId="2894" CreationDate="2015-11-10T02:05:53.690" Score="2" Body="&lt;p&gt;Since the previous &lt;a href=&quot;https://elementaryos.stackexchange.com/revisions/a0e42834-7076-4adc-bf89-db9167e193a3/view-source&quot;&gt;method&lt;/a&gt; not solved, this is the &lt;em&gt;possible&lt;/em&gt; solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Steps&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot into windows and open &lt;strong&gt;command prompt as administrator&lt;/strong&gt;, and run the command to &lt;em&gt;disable hibernation&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;powercfg /h off &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Disable Fast Boot&lt;/strong&gt;, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Control Panel --&gt;&#xA;select the Energy Settings--&gt;enable show hidden settings --&gt;uncheck Fast Boot ( this is  the path in older systems)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now shutdown completely &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now boot from elementary &lt;em&gt;live usb/cd&lt;/em&gt; (select &lt;strong&gt;Try elementary&lt;/strong&gt; )&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount [1] /mnt&#xA;sudo mount [2] /mnt/boot/efi&#xA;for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done&#xA;sudo chroot /mnt&#xA;grub-install [3]&#xA;update-grub &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;[1]=system partition  ; [2]=efi partition; [3]=disk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use &lt;strong&gt;gparted&lt;/strong&gt; to identify partitions&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Finally&lt;/em&gt;, Boot into BIOS and change the boot order in UEFI settings.&#xA;Select elementary to be the default operating system to boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt; reference &lt;a href=&quot;https://askubuntu.com/questions/685662/my-computer-isnt-loading-grub-when-i-boot/686229#686229&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-12T10:23:43.977" LastActivityDate="2015-11-12T10:23:43.977" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2899" PostTypeId="1" AcceptedAnswerId="2935" CreationDate="2015-11-10T02:30:46.813" Score="1" ViewCount="297" Body="&lt;p&gt;I am using elementary OS Freya, It works fine unitl yesterday I add a ubuntu deb link in sources.list, After I &lt;code&gt;apt-get update &amp;amp; apt-get dist-upgrade&lt;/code&gt;, so, you can tell how silly I am, however, I want to remove the duplcate item in system-settings window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can any body help me please? (forgive my english sucks :-) )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/RRxxU.png&quot; alt=&quot;screenshot&quot;&gt;&#xA;Here is a thread but not solve my Q.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2660/how-to-customize-system-settings-window&quot;&gt;How to customize system settings window&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3044" LastEditorUserId="3757" LastEditDate="2016-05-06T14:30:23.233" LastActivityDate="2016-05-06T14:30:23.233" Title="How do I remove item[duplcate] from system settings on elementary os?" Tags="|settings|" AnswerCount="2" CommentCount="2" ClosedDate="2015-11-12T02:33:28.897" ContentLicense="CC BY-SA 3.0" />
  <row Id="2900" PostTypeId="1" CreationDate="2015-11-10T03:03:36.237" Score="1" ViewCount="224" Body="&lt;p&gt;I wasn't sure whether to post this on a more Eclipse/Java related forum but I thought this was a more Elementary OS specific question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me make sense of this error? I need Java for university related work and don't want to have to boot to Windows just to use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/52Xfr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Screenshot&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3045" LastActivityDate="2015-11-11T10:42:25.897" Title="Eclipse Mars (fresh install) won't run on Freya" Tags="|eclipse|" AnswerCount="3" CommentCount="0" ClosedDate="2015-11-18T11:42:11.730" ContentLicense="CC BY-SA 3.0" />
  <row Id="2901" PostTypeId="2" ParentId="2900" CreationDate="2015-11-10T08:09:10.367" Score="0" Body="&lt;p&gt;The problem will be solved by adding the following to the last line in &lt;code&gt;eclipse.ini&lt;/code&gt;  :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-Dorg.eclipse.swt.internal.gtk.cairoGraphics=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This setting will resolve the JVM terminated. Exit code=1 problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;Reference &lt;a href=&quot;https://stackoverflow.com/questions/31146089/eclipse-error-jvm-terminated-exit-code-1-usr-java70-jre-bin-java&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-10T08:09:10.367" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2902" PostTypeId="2" ParentId="2469" CreationDate="2015-11-10T13:14:03.720" Score="0" Body="&lt;p&gt;You can do this by running this command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL  http://i-hate-farms.github.io/spores/install | sudo bash - &#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="34" LastEditDate="2015-12-31T13:55:59.807" LastActivityDate="2015-12-31T13:55:59.807" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2903" PostTypeId="1" AcceptedAnswerId="2905" CreationDate="2015-11-10T13:42:40.793" Score="4" ViewCount="638" Body="&lt;p&gt;I'm trying to install Japanese language using last Freya release.&#xA;Steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Hit &lt;strong&gt;+&lt;/strong&gt; in &lt;strong&gt;Language&amp;amp;Region&lt;/strong&gt; settings.&lt;br&gt;&#xA;2) Find &lt;em&gt;japanese&lt;/em&gt; or 日本語.&lt;br&gt;&#xA;3) Double-click&lt;br&gt;&#xA;4) Then the left bar becomes greyed out and not responsive. Can not see any visible progress.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I'm doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="3047" LastEditorUserId="3047" LastEditDate="2015-11-10T17:23:59.063" LastActivityDate="2015-11-11T10:11:42.423" Title="Can not install Japanese language" Tags="|settings|language|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-31T14:16:35.060" ContentLicense="CC BY-SA 3.0" />
  <row Id="2904" PostTypeId="1" CreationDate="2015-11-10T16:57:48.577" Score="2" ViewCount="409" Body="&lt;p&gt;I downloaded Freya, installed it alongside Windows, updated it, but it's response is too slow. It takes too long to boot, files take time to open, sometimes it just gets stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked for bad sectors but found none, checked cpu and memory usage, it's not much, checked whether too much swapping is happening, it isn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really don't know what to do. I am thinking to completely wipe my disk and install Freya again. But, is there any other solution for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My desktop specifications are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;2.4GHz Intel Core 2 Duo&lt;/li&gt;&#xA;&lt;li&gt;2GB RAM&lt;/li&gt;&#xA;&lt;li&gt;500GB hard disk space&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Would wiping my disk and installing it again help? Or is there any other solution?&lt;/p&gt;&#xA;" OwnerUserId="3049" LastEditorUserId="45" LastEditDate="2015-11-10T20:43:16.367" LastActivityDate="2015-11-11T16:12:50.827" Title="How can I diagnose slow disk I/O?" Tags="|release-freya|boot|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2905" PostTypeId="2" ParentId="2903" CreationDate="2015-11-10T17:14:41.223" Score="4" Body="&lt;p&gt;&lt;em&gt;Nothing wrong&lt;/em&gt; in your steps, it happens to me as well, &lt;em&gt;might&lt;/em&gt; be a bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But we need to install &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;language-pack-gnome-ja&lt;br&gt;&#xA;  language-pack-gnome-ja-base&lt;br&gt;&#xA;  language-pack-ja&lt;br&gt;&#xA;  language-pack-ja-base&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;While installing from terminal using &lt;code&gt;apt-get&lt;/code&gt; getting dependency errors as in the bug.(&lt;em&gt;I missed the bug page, I will add the link later&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I manually installed all the &lt;code&gt;.deb&lt;/code&gt; packages,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First download all &lt;code&gt;.deb&lt;/code&gt; files,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://launchpadlibrarian.net/214456012/language-pack-ja_14.04%2B20150804_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;language-pack-ja &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://launchpadlibrarian.net/214456132/language-pack-ja-base_14.04%2B20150804_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;language-pack-ja-base&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://launchpadlibrarian.net/172559423/language-pack-gnome-ja-base_14.04%2B20140410_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;language-pack-gnome-ja-base&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://launchpadlibrarian.net/214456150/language-pack-gnome-ja_14.04%2B20150804_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;language-pack-gnome-ja&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now install in the order either from Software Centre or from terminal,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From terminal (I suggest use terminal, If you got errors use Software center)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;ls #to avoid errors with file names&#xA;sudo dpkg -i [language-pack-ja deb]&#xA;sudo dpkg -i [language-pack-ja-base deb]&#xA;sudo dpkg -i [language-pack-gnome-ja-base deb]&#xA;sudo dpkg -i [language-pack-gnome-ja deb]&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yPiQ2.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If still not able to change to &lt;em&gt;japanese&lt;/em&gt;, Again follow the procedure,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Hit &lt;strong&gt;+&lt;/strong&gt; in &lt;em&gt;Language&amp;amp;Region&lt;/em&gt; settings.&lt;br&gt;&#xA;2) Find japanese or 日本語.&lt;br&gt;&#xA;3) Double-click (This time should work, as shown in screenshot)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lT5h3.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that hit &lt;kbd&gt;set language&lt;/kbd&gt; and &lt;kbd&gt;set system language&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to &lt;code&gt;restart&lt;/code&gt; system to apply changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After restart, your language settings will be changed,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Yt7WU.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6OdkV.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-11T10:11:42.423" LastActivityDate="2015-11-11T10:11:42.423" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="2907" PostTypeId="2" ParentId="2900" CreationDate="2015-11-10T21:31:57.703" Score="0" Body="&lt;p&gt;Do you really need to use JDK9? As far as I know, JDK9 is still not released, and there might be some issues with JDK9 and the libraries used by Eclipse (e.g. SWT). I suggest that you switch to JDK8 to see if the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note, the latest release of Netbeans (8.1) runs fine on the Oracle JDK8 on Freya, but Netbeans uses the Swing UI framework instead of SWT so it's probably a little more portable than SWT. Could be worth trying, and Netbeans is actually a really nice IDE for Java development (among other things). The native Maven support is reason enough to use NB instead of Eclipse IMHO, but it also has many other nice features that has kept me from switching back ever since 2006/2007. I suggest you give it a try unless your Eclipse/SWT issue has already been solved.&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2015-11-10T21:31:57.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2908" PostTypeId="1" CreationDate="2015-11-10T21:57:04.653" Score="6" ViewCount="2055" Body="&lt;p&gt;I'm on elementary OS Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Luna, one could use &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Right&lt;/kbd&gt; to move a window from this workspace to the next workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Freya, I've noticed that when I have multiple monitors connected, the shortcut simply moves a window from one screen to the next screen to the right. Without multiple monitors connected, the shortcut doesn't work, the window stays on the current workspace. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My keyboard shortcut settings are pretty standard:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mlw6I.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mlw6I.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has this functionality changed in Freya? Interestingly enough, I can do &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Left&lt;/kbd&gt; and it works okay if I'm not on the first workspace.&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2015-11-10T22:03:15.437" LastActivityDate="2017-02-15T07:40:47.957" Title="Shift+Super+Right doesn't move current window right" Tags="|keyboard-shortcuts|workspace|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2909" PostTypeId="2" ParentId="2858" CreationDate="2015-11-10T23:17:49.047" Score="0" Body="&lt;pre&gt;&lt;code&gt;show-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is what I use in hot corners in Luna--It worked in Freya too but updates apparently killed it.&lt;/p&gt;&#xA;" OwnerUserId="12" LastEditorUserId="12" LastEditDate="2015-11-11T17:38:37.947" LastActivityDate="2015-11-11T17:38:37.947" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2910" PostTypeId="1" CreationDate="2015-11-10T23:33:21.683" Score="3" ViewCount="866" Body="&lt;p&gt;Expose acts really weird on multiple monitors on Freya. On Luna, it worked great, but on Freya, there seems to have been a regression leading to only one monitor doing the expose:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fwFzW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fwFzW.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to re-enable expose for multiple monitors? To test the problem: &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Down&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2015-11-11T19:28:54.747" LastActivityDate="2016-09-07T18:09:46.217" Title="Enable multi-monitor expose?" Tags="|release-freya|keyboard-shortcuts|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2911" PostTypeId="1" CreationDate="2015-11-10T23:39:57.533" Score="3" ViewCount="210" Body="&lt;p&gt;I had some troubles with my UI(like windows classic), can someone help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BuUAp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BuUAp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3051" LastActivityDate="2015-11-30T13:15:36.490" Title="Firefox and Libreoffice UI is broken" Tags="|gtk|firefox|libreoffice|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2912" PostTypeId="1" CreationDate="2015-11-11T05:20:15.510" Score="1" ViewCount="355" Body="&lt;p&gt;Is there an image crop tool available for elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I usually use &lt;a href=&quot;http://www.picresize.com/&quot; rel=&quot;nofollow&quot;&gt;on-line image crop tool&lt;/a&gt; for that purpose, but that need internet connection. So I need image processing/crop tool/software for freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I &lt;em&gt;install&lt;/em&gt; and &lt;em&gt;use&lt;/em&gt; them on elementary OS&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2015-11-11T23:12:54.143" LastActivityDate="2015-11-19T17:42:59.003" Title="How can I crop images?" Tags="|software-recommendation|photos|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2913" PostTypeId="2" ParentId="2870" CreationDate="2015-11-11T06:25:13.277" Score="2" Body="&lt;p&gt;You can change the icon of dota 2 going to&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;~/.local/share/applications&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and opening &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Dota 2.desktop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;with a text editor like gedit or scratch, change this line&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Icon=steam&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;to this&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Icon=steam_icon_570&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;also, put this at the end of the file &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;StartupWMClass=dota2&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and save the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your dota 2 icon is a gear, you can install elementary community icons from &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mank319/elementaryPlus&lt;/a&gt;, follow the instructions there and you will have a nice dota 2 icon.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Sorry for my english.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sources: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://steamcommunity.com/app/570/discussions/0/46476145209393444/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://steamcommunity.com/app/570/discussions/0/46476145209393444/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/one-of-my-apps-has-a-second-fuzzy-icon-in-plank-how-can-i-workaround-this&quot;&gt;One of my apps has a second, fuzzy icon in Plank. How can I workaround this?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3054" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-11T06:25:13.277" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2914" PostTypeId="1" AcceptedAnswerId="2925" CreationDate="2015-11-11T08:22:45.553" Score="5" ViewCount="4584" Body="&lt;p&gt;I got message like this : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fenQH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fenQH.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@ferryready-Satellite-L510:/home/ferryready# curl -sL http://i-hate-farms.github.io/spores/install | sudo bash -&#xA;Installing the repository...&#xA;OK&#xA;Traceback (most recent call last):&#xA;File &quot;/usr/bin/add-apt-repository&quot;, line 91, in &amp;lt;module&amp;gt;&#xA;sp = SoftwareProperties(options=options)&#xA;File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 109, in __init__&#xA;self.reload_sourceslist()&#xA;File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 599, in reload_sourceslist&#xA;self.distro.get_sources(self.sourceslist)    &#xA;File &quot;/usr/lib/python3/dist-packages/aptsources/distro.py&quot;, line 89, in get_sources&#xA;(self.id, self.codename))&#xA;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Ubuntu/n/a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="5565" LastEditDate="2016-10-07T02:29:14.913" LastActivityDate="2016-10-07T02:29:14.913" Title="&quot;could not find a distribution template for Ubuntu/n/a&quot; error in elementary OS" Tags="|pantheon-terminal|apt|ppa|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2915" PostTypeId="1" AcceptedAnswerId="2926" CreationDate="2015-11-11T08:23:28.883" Score="1" ViewCount="81" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xfYVY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xfYVY.png&quot; alt=&quot;every time I added a screenshot-tool PPA, always fail?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time I would install the screenshot tool and add PPA, always fail?&lt;/p&gt;&#xA;" OwnerUserId="3055" LastEditorUserId="3757" LastEditDate="2016-04-25T02:12:35.607" LastActivityDate="2016-04-25T02:12:35.607" Title="I wonder why I have always failed to add screenshot-tool ppa ? Please help" Tags="|screenshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2916" PostTypeId="2" ParentId="2912" CreationDate="2015-11-11T08:46:58.903" Score="1" Body="&lt;p&gt;You can use PImagizer to resize one by one, or use Converseen to resize many images.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it by the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntuhandbook1/apps&#xA;sudo apt-get update&#xA;sudo apt-get install converseen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Zi4Gx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zi4Gx.png&quot; alt=&quot;resize more than one[![][3]&quot;&gt;&lt;/a&gt;]&lt;a href=&quot;https://i.stack.imgur.com/Zi4Gx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;3&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastEditorUserId="2926" LastEditDate="2015-11-19T17:42:59.003" LastActivityDate="2015-11-19T17:42:59.003" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2917" PostTypeId="2" ParentId="2912" CreationDate="2015-11-11T08:56:12.627" Score="7" Body="&lt;p&gt;Photos (and its companion Photo Viewer) is installed by default and can crop images.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zjr7k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zjr7k.png&quot; alt=&quot;Image showing cropping&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="45" LastEditDate="2015-11-11T23:17:53.153" LastActivityDate="2015-11-11T23:17:53.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2918" PostTypeId="2" ParentId="2910" CreationDate="2015-11-11T09:02:22.717" Score="1" Body="&lt;p&gt;At my PC the workspace switcher works just fine. Each monitor has their own workspaces. You might want to check your videocard drivers or &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+filebug&quot; rel=&quot;nofollow&quot;&gt;file an bug report.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;I've misunderstood your question. It doesn't seem that what you want is possible right now.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2629" LastEditDate="2015-11-12T13:37:52.367" LastActivityDate="2015-11-12T13:37:52.367" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2919" PostTypeId="2" ParentId="2904" CreationDate="2015-11-11T09:06:39.100" Score="1" Body="&lt;p&gt;You can monitor your IO with &lt;a href=&quot;http://guichaz.free.fr/iotop/&quot; rel=&quot;nofollow&quot;&gt;IOtop&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install iotop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or you can search it in the Software Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is also fair to note that HDD's just aren't that fast. It could just be you expecting to much speed. The only way to solve that is to upgrade to an SSD. Reinstalling might help, but only temporary.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-11T09:06:39.100" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2920" PostTypeId="2" ParentId="2915" CreationDate="2015-11-11T09:17:35.047" Score="1" Body="&lt;p&gt;This could be coused by a lot of things.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Your firewall might be blocking it (not really likely)&lt;/li&gt;&#xA;&lt;li&gt;You might have no internet connection&lt;/li&gt;&#xA;&lt;li&gt;The repository might be deleted or renamed (or it might just not exists)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-11T09:17:35.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2921" PostTypeId="2" ParentId="2899" CreationDate="2015-11-11T09:19:35.233" Score="0" Body="&lt;p&gt;You have upgraded to the daily (beta) PPA. This can couse this kind of bugs. The only way to remove the double items it by eighter removing the old non-beta items or the new ones.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-11T09:19:35.233" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2922" PostTypeId="2" ParentId="2915" CreationDate="2015-11-11T10:31:58.463" Score="2" Body="&lt;p&gt;After a little research and with the help of my Ask Ubuntu friends, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is clear that there is &lt;strong&gt;no PPA&lt;/strong&gt; with that name.(at present)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://launchpad.net/~fabiozaramella&quot; rel=&quot;nofollow&quot;&gt;OP&lt;/a&gt; might have &lt;em&gt;hidden/deleted&lt;/em&gt; the &lt;a href=&quot;https://launchpad.net/screenshot-tool&quot; rel=&quot;nofollow&quot;&gt;PPA&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After &lt;em&gt;compile&lt;/em&gt; (by my &lt;a href=&quot;https://askubuntu.com/users/367165/a-b&quot;&gt;AU friend&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:fabiozaramella/screenshot-tool &#xA;[sudo] password for : &#xA;Cannot add PPA: 'ppa:~fabiozaramella/ubuntu/screenshot-tool'. &#xA;The user named '~fabiozaramella' has no PPA named 'ubuntu/screenshot-tool' &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt; I have sent a mail to the  fabiozaramella, waiting for reply&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-11T10:31:58.463" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2923" PostTypeId="2" ParentId="2900" CreationDate="2015-11-11T10:42:25.897" Score="0" Body="&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1452185&quot; rel=&quot;nofollow&quot;&gt;known bug&lt;/a&gt; in Gala, but there is no solution yet.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2015-11-11T10:42:25.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2924" PostTypeId="1" AcceptedAnswerId="2933" CreationDate="2015-11-11T13:14:54.090" Score="1" ViewCount="115" Body="&lt;p&gt;Does anybody can tell me how to add a button to call open_file_dialog on GTK Header bar?&#xA;i did it in appmenu with,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$.activate.connect(() =&gt;{&#xA;                this.dialog_openFile();&#xA;            }); &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but this way dont works on a simple call in headerbar,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i'm a newbie, learning about GTK and Granit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;" OwnerUserId="281" LastActivityDate="2015-11-27T22:18:02.013" Title="How can i add a simple call to open file dialog on headerbar?" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2925" PostTypeId="2" ParentId="2914" CreationDate="2015-11-11T13:32:59.653" Score="4" Body="&lt;p&gt;&lt;em&gt;The possible fix&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gksu&lt;/code&gt; # If not installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk-module:i386&lt;/code&gt; # If you get Failed to load module &quot;canberra-gtk-module&quot; error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now &lt;code&gt;gksudo nano /etc/lsb-release&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file should be like, &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;DISTRIB_ID=&quot;elementary OS&quot;&lt;br&gt;&#xA;  DISTRIB_RELEASE=0.3.1&lt;br&gt;&#xA;  DISTRIB_CODENAME=freya&lt;br&gt;&#xA;  DISTRIB_DESCRIPTION=&quot;elementary OS Freya&quot;  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: Use this for fresh installation of freya, I am not sure for upgrading from luna.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-11T13:32:59.653" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2926" PostTypeId="2" ParentId="2915" CreationDate="2015-11-11T13:51:08.693" Score="3" Body="&lt;p&gt;The &lt;code&gt;screenshot-tool&lt;/code&gt; was moved to the elementary's Launchpad, so what you should execute if you want the latest version is: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get upgrade screenshot-tool&#xA;sudo add-apt-repository --remove ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The installation instructions &lt;em&gt;are&lt;/em&gt; outdated. I hope that @Ravan is going to manage to get them fixed by contacting Fabio.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2015-11-11T13:51:08.693" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2928" PostTypeId="2" ParentId="2904" CreationDate="2015-11-11T16:12:50.827" Score="1" Body="&lt;p&gt;I think my HDD is dying. I tried to wipe my disk using dban and it shows 344+ hours remaining. So no problem with the Freya, it's my HDD. &lt;/p&gt;&#xA;" OwnerUserId="3049" LastActivityDate="2015-11-11T16:12:50.827" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2930" PostTypeId="2" ParentId="2911" CreationDate="2015-11-11T17:28:39.017" Score="1" Body="&lt;p&gt;I am not sure of why it could happens, but try the following :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install Gnome Tweak Tools&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-tweak-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then launch it :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome-tweak-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And make sure that everything in Appearance is set to elementary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fkECi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fkECi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2500" LastEditorUserId="2500" LastEditDate="2015-11-30T13:15:36.490" LastActivityDate="2015-11-30T13:15:36.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2931" PostTypeId="2" ParentId="2721" CreationDate="2015-11-11T19:55:47.013" Score="3" Body="&lt;p&gt;You have problem with permission, could you please output &lt;code&gt;ls -ld /usr/share/backgrounds&lt;/code&gt; and &lt;code&gt;ls -l /usr/share/backgrounds/&lt;/code&gt; ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Directory backgrounds should be &lt;code&gt;755&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;drwxr-xr-x 2 root root 4096 Nov  4 03:22 /usr/share/backgrounds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and files should &lt;code&gt;644&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-rw-r--r-- 1 root root  498830 Okt  5 05:16 164.jpg&#xA;-rw-r--r-- 1 root root  633430 Okt  5 05:16 168.jpg&#xA;-rw-r--r-- 1 root root  397147 Okt  5 05:16 16.jpg&#xA;-rw-r--r-- 1 root root  480634 Okt  5 05:16 173.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;try this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod -R 644 /usr/share/backgrounds&#xA;sudo chmod 755 /usr/share/backgrounds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2984" LastEditorUserId="2984" LastEditDate="2019-12-13T03:36:58.990" LastActivityDate="2019-12-13T03:36:58.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="2933" PostTypeId="2" ParentId="2924" CreationDate="2015-11-12T00:13:08.797" Score="1" Body="&lt;p&gt;Ok. First, you'll need a header bar and add a button to it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;private void create_headerbar () {&#xA;    var headerbar = new Gtk.HeaderBar ();&#xA;&#xA;    var button = new Gtk.Button.from_icon_name (&quot;document-open&quot;,&#xA;        Gtk.IconSize.LARGE_TOOLBAR);&#xA;&#xA;    button.clicked.connect (() =&amp;gt; {&#xA;        show_file_dialog();&#xA;    });        &#xA;&#xA;    headerbar.pack_start (button);&#xA;    window.set_titlebar (headerbar);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;window&lt;/code&gt; at the end is a &lt;code&gt;Gtk.Window&lt;/code&gt; I've declared elsewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That &lt;code&gt;show_file_dialog()&lt;/code&gt; method is the one that will show the dialog. &#xA;It's declared next:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;private void show_file_dialog(){&#xA;    var dialog = new Gtk.FileChooserDialog (&quot;Open File&quot;,&#xA;                                  window,&#xA;                                  Gtk.FileChooserAction.OPEN,&#xA;                                  &quot;_Cancel&quot;,&#xA;                                  Gtk.ResponseType.CANCEL,&#xA;                                  &quot;_Open&quot;,&#xA;                                  Gtk.ResponseType.ACCEPT);&#xA;&#xA;    var response = dialog.run();&#xA;&#xA;    if (response == Gtk.ResponseType.ACCEPT) {&#xA;        string filename = dialog.get_filename();&#xA;&#xA;        //now do something with the filename&#xA;    }       &#xA;    dialog.dispose(); //no need for the dialog to be around anymore&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I think this is a good starting point. You'll need to adapt it for your needs like changing the methods' signatures and so...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Works on my machine&quot;™&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="2461" LastEditDate="2015-11-27T22:18:02.013" LastActivityDate="2015-11-27T22:18:02.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2934" PostTypeId="1" CreationDate="2015-11-12T01:04:32.490" Score="0" ViewCount="37" Body="&lt;p&gt;I decided to install elementary OS on my Lenovo G410 (no touch). I downloaded and burned the installation media and booted from it. The installation went fine until the very end, when an error popped up saying that GRUB had failed to install. When I rebooted, my computer went straight to Windows 8.1, without me being able to boot from Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="3065" LastEditorUserId="34" LastEditDate="2015-11-19T13:18:51.313" LastActivityDate="2015-11-19T13:18:51.313" Title="Error at the end of installation -- GRUB -- Dual boot w/ Windows 8.1" Tags="|system-installation|settings|" AnswerCount="0" CommentCount="2" ClosedDate="2015-11-18T11:37:13.363" ContentLicense="CC BY-SA 3.0" />
  <row Id="2935" PostTypeId="2" ParentId="2899" CreationDate="2015-11-12T02:03:49.657" Score="1" Body="&lt;p&gt;This morning, I did this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | grep &quot;network&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and terminal output like:&#xA;&lt;code&gt;&#xA;ii  switchboard-plug-gcc-network     0.3.0~r29~ubuntu0.3.1                                   ii  switchboard-plug-networking      0.1+r175~daily~ubuntu0.3.1.1 ...&#xA;&lt;/code&gt;&#xA;and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -r switchboard-plug-networking&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;p&gt;problem solved!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks @Jeroen @Ravan&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;btw,  How flag the question are solved ?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3044" LastActivityDate="2015-11-12T02:03:49.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2937" PostTypeId="1" AcceptedAnswerId="2969" CreationDate="2015-11-12T04:05:33.560" Score="3" ViewCount="151" Body="&lt;p&gt;I am using freya. I prefer to use &lt;em&gt;terminal&lt;/em&gt; for  my work. (from copy to installation). In elementary, when I close terminal, it will be still on the previous directory. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I disable this feature? Also can I use terminal in &lt;em&gt;incognito&lt;/em&gt; mode?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="3757" LastEditDate="2016-05-07T03:50:59.130" LastActivityDate="2016-05-07T03:50:59.130" Title="How to use terminal in &quot;incognito mode'?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2938" PostTypeId="1" CreationDate="2015-11-12T04:46:40.157" Score="6" ViewCount="825" Body="&lt;p&gt;I observed many posts on internet suggests to add PPA's to install an application. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it safe to add the PPA's? The answer is : No (wrt &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17/can-i-safely-install-any-ppa-for-ubuntu-on-elementary/19#19&quot;&gt;this&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;My question&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way &lt;em&gt;to know&lt;/em&gt; whether the PPA's are safe or not?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it's not possible to know safe/not, what should I observe about the PPA before adding it to system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which internet sources can I trust that suggests PPA installation.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-12T07:50:00.973" Title="How can I identify a PPA is safe or not?" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2939" PostTypeId="2" ParentId="2912" CreationDate="2015-11-12T07:09:13.697" Score="3" Body="&lt;h2&gt;&lt;a href=&quot;https://www.gimp.org/downloads/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GIMP&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;GIMP is a free graphic manipulation tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Installation&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;From &lt;strong&gt;software center&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fXtA2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fXtA2.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can also install it through the terminal, if you are comfortable doing that, by running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gimp&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For the latest version, with newer features, use a PPA as &lt;a href=&quot;https://www.gimp.org/downloads/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GIMP suggests&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:otto-kesselgulasch/gimp&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install gimp&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o5Pa2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o5Pa2.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2926" LastEditDate="2015-11-19T14:45:29.517" LastActivityDate="2015-11-19T14:45:29.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2940" PostTypeId="2" ParentId="2938" CreationDate="2015-11-12T07:50:00.973" Score="3" Body="&lt;p&gt;The only way to be absolutely certain is by reading the code and checking if it is not malicious. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't read code or don't have the time to do so (almost no one does :p) you can verify how safe it is by:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use a search engine to get more information about the ppa. &lt;/li&gt;&#xA;&lt;li&gt;Check if there are articles describing the ppa (if a ppa has a lot of hype around itself, there is a good change someone did check how safe it is).&lt;/li&gt;&#xA;&lt;li&gt;The amount of contributors. If there are a lot of different people working on a project, it gets really hard to implement malicious features (unless they work together on the malicious features of course) without getting noticed by the other contributors.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If besides all these options you still don't trust a ppa, you could install it in a virtual machine and test it there yourself. That way, the program(s) can not access your harddrive or hardware, and thus do no real damage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But to repeat:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;The only way to be absolutely certain is by reading the code and checking if it is not malicious.&lt;/em&gt; &lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-12T07:50:00.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2941" PostTypeId="2" ParentId="2443" CreationDate="2015-11-12T07:58:04.777" Score="3" Body="&lt;p&gt;You could try reinstalling the desktop environment going into the TTY (&lt;code&gt;CRTL+ALT+F1&lt;/code&gt;) and running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, reboot using the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If everything went right, you should be able to login again.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="26" LastEditDate="2016-03-09T22:45:27.027" LastActivityDate="2016-03-09T22:45:27.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2943" PostTypeId="2" ParentId="135" CreationDate="2015-11-12T09:45:00.060" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://screencloud.net&quot; rel=&quot;nofollow noreferrer&quot;&gt;Screencloud&lt;/a&gt; and &lt;a href=&quot;https://quassy.github.io/elementary-apps/Screenshot&quot; rel=&quot;nofollow noreferrer&quot;&gt;screenshots-tools&lt;/a&gt; is equally as good. Picture with a smooth-shadow-border will be obtained perfectly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here for example, the first images obtained with Screencloud&#xA;and a second image obtained with Screenshot-tool&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mWTQr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mWTQr.png&quot; alt=&quot;Screencloud do&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BlmRp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BlmRp.png&quot; alt=&quot;Screenshot-tool do&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastActivityDate="2015-11-12T09:45:00.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2944" PostTypeId="1" CreationDate="2015-11-12T10:23:55.763" Score="1" ViewCount="133" Body="&lt;p&gt;Well as I plugged in the monitor to my laptop it all run smoothly. Then I turned off my built-in display from settings and chose sound output - same HDMI.&#xA;It worked well until I decided to turn my built-in display back. &#xA;as I click on cogwheel and swipe &quot;turn on display&quot; it everytime suddenly returns back to previous position. =\ dat terrible bug T.T&#xA;Furthermore ElementaryOS saves settings for every separate display and after pluggin in HDMI again built-in display goes off and same can't be turned on via &quot;settings&quot;.&#xA;I guess there exists kind of a pure black terminal magic to turn it all but in &quot;settings&quot; there is definitely a bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound:&#xA;If I don't switch sound output back to my built-in speakers some strange things are goin to happen:&#xA;system sounds and sound from firefox are working well. But all the other applications give no sound. I had to plug HDMI again and in sound settings explicitly switch sound output to built-in speakers. Nothing else {  including reboot} didn't help me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best wishes, &#xA;Amphyby.&lt;/p&gt;&#xA;" OwnerUserId="3069" LastActivityDate="2015-11-12T10:23:55.763" Title="HDMI unplugging sound and display bug" Tags="|settings|sound|" AnswerCount="0" CommentCount="0" ClosedDate="2019-05-13T06:54:44.663" ContentLicense="CC BY-SA 3.0" />
  <row Id="2946" PostTypeId="1" CreationDate="2015-11-12T12:54:51.117" Score="4" ViewCount="1715" Body="&lt;p&gt;I can't get sound to work on HDMI. I've read every thread on it I found, tried everything and nothing seems to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I connect the HDMI cable to my tv (which btw had no problems with hdmi sound prior to this, whether with my ps4 or windows) the screen duplicates or extends to the tv randomly, which is weird but unimportant. Unlike other distros I tried where mouse started to lag, on elementary there's no issues with HDMI other than the apparent lack of sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried downloading pavucontrol, I've tried updating alsa, I've tried every nvidia driver I found, but nothing I do changes anything in the sound options. I still only get the choice between speakers and digital s/pdif.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using an older laptop with second generation i7 CPU 6gb of ram, an integrated Intel graphics card and a GT 635M.&lt;/p&gt;&#xA;" OwnerUserId="3073" LastEditorUserId="9" LastEditDate="2016-03-20T03:41:56.467" LastActivityDate="2019-10-30T14:32:29.613" Title="How to get sound to work in HDMI" Tags="|sound|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2947" PostTypeId="1" CreationDate="2015-11-12T15:27:26.103" Score="1" ViewCount="117" Body="&lt;p&gt;I've had alot of trouble lately, after migrating to Elementary OS. &#xA;The problem is that the touchpad does not work at all. After numerous reinstalls I, somehow, randomly, managed to get it to work, however when I received an information regarding a software update on the Software Center and installed it, when I rebooted, it no longer worked.&#xA;Since then, I've been aimlessly trying to replicate what happened for it to work the first time, with no luck, unfortunately.&#xA;I've followed as many threads as I could of people with different OS's and &quot;fixes&quot; for my problem, but none seemed to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently found this: &lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=81331#c186&quot; rel=&quot;nofollow&quot;&gt;https://bugzilla.kernel.org/show_bug.cgi?id=81331#c186&lt;/a&gt;&#xA;Which tells me that my computer used to have this issue in older kernel versions, however it has been fixed on 3.16.0-rc7. My kernel version is 3.19.0-26 so it should have work.&lt;/p&gt;&#xA;" OwnerUserId="3075" LastActivityDate="2015-11-12T15:27:26.103" Title="Elantech TouchPad not working on XMG laptop" Tags="|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2948" PostTypeId="1" CreationDate="2015-11-12T19:31:38.357" Score="1" ViewCount="80" Body="&lt;p&gt;Pannel doesn't show thunderbird tray icon/indicator even using minimize to tray or firefray add-ons.&#xA;How can i fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3076" LastActivityDate="2015-11-12T19:31:38.357" Title="Pannel doesn't show thunderbird tray icon/indicator" Tags="|wingpanel|" AnswerCount="0" CommentCount="1" ClosedDate="2016-02-03T01:45:20.340" ContentLicense="CC BY-SA 3.0" />
  <row Id="2949" PostTypeId="2" ParentId="1023" CreationDate="2015-11-12T20:52:40.030" Score="1" Body="&lt;p&gt;Windows can not do some updates by starting over grub !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you must restore the windows bootloader !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;run cmd as administrator &#xA;type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bootsect /nt60 c: /mbr &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now you can reboot and windows 10 will perform his updates !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After updating windows you have to restore your grub !&#xA;you can take &lt;strong&gt;debian install cd&lt;/strong&gt; (ubuntu have rescue mode only on lubuntu alternate cd ) and &lt;strong&gt;start in rescue mode&lt;/strong&gt;&#xA;choose language ... at network configuration go back and enter rescue mode&#xA;then run a cmd on your linux partition ubuntu/debian/mint /dev/sda2 ... or other&lt;/p&gt;&#xA;&#xA;&lt;p&gt;type :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub-install /dev/sda &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;update-grub &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now reboot &lt;/p&gt;&#xA;" OwnerUserId="3077" LastEditorUserId="2708" LastEditDate="2015-11-13T01:59:52.073" LastActivityDate="2015-11-13T01:59:52.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2950" PostTypeId="2" ParentId="2870" CreationDate="2015-11-12T21:00:49.293" Score="1" Body="&lt;p&gt;I fixed this problem. Initially I wasn't able to find the &lt;code&gt;Dota\ 2.desktop&lt;/code&gt;. When I try the solution mentioned &lt;a href=&quot;https://elementaryos.stackexchange.com/q/2883/2856&quot;&gt;here&lt;/a&gt; using MainMenu I lost my app. So I created a back-up and reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was using &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryPlus&lt;/a&gt;, and I found a nive Dota2 icons there, so I posted &lt;a href=&quot;https://github.com/mank319/elementaryPlus/issues/317&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue with my problem&lt;/a&gt; and I got support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I reinstalled Dota2 I found the &lt;code&gt;Dota\ 2.desktop&lt;/code&gt; file and I replace the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=dota2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="2856" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-12T21:00:49.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2951" PostTypeId="1" CreationDate="2015-11-12T21:52:14.210" Score="3" ViewCount="123" Body="&lt;p&gt;When i go to install some ttf font (i didn't tryed installing open fonts) the system breaks down... sometimes the installation is fine and everything works correctly. Could be a pkg problem? or something like that? any solution? &lt;/p&gt;&#xA;" OwnerUserId="3078" LastActivityDate="2018-05-05T18:47:30.617" Title="Usually when i'm going to install fonts the system breaks down !" Tags="|fonts|" AnswerCount="1" CommentCount="2" ClosedDate="2016-09-19T00:12:03.727" ContentLicense="CC BY-SA 3.0" />
  <row Id="2952" PostTypeId="1" CreationDate="2015-11-12T23:53:44.553" Score="1" ViewCount="923" Body="&lt;p&gt;Installed over Ubuntu 14.04 which was installed over OS X on an old MacBook Pro. Greeted with the GRUB bootloader. I have seen &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;this thread&lt;/a&gt; but I have an extra issue that prevents me from using the workaround: when I do an ls, I am shown:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(hd0) (hd1) (hd1,gpt3) (hd1,gpt2) (hd1,gpt1) (cd0) error: failure reading sector 0x0 from 'hd0'.&#xA;error: failure reading sector 0x0 from 'cd0'.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Looking at (hd1,1) I found the folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(hd1,1)/efi/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which, when I run the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configfile (hd1,1)/efi/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Gives me the option to boot into GNU/Linux. Then the screen just goes black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't seem to get to the point where I can do the workaround suggested in the first thread linked here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran boot-repair and &lt;a href=&quot;http://paste.ubuntu.com/13242621/&quot; rel=&quot;nofollow&quot;&gt;here is the log&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3079" LastActivityDate="2015-11-20T03:57:42.150" Title="Booting into GRUB after installing on top of Ubuntu 14.04" Tags="|grub|ubuntu|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2954" PostTypeId="1" CreationDate="2015-11-13T08:23:09.300" Score="1" ViewCount="21" Body="&lt;p&gt;My user name for an SMB share contains an @ (like hans@blah.com). It works fine from the terminal masking it with a \ (like hans\@blah.com). This, however, does not work from pantheon-files. Looking into the log at the target, I can see that the user arrives as hans only. If I mask it or not, the log on attempt is always with the name part only.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution for this?&lt;/p&gt;&#xA;" OwnerUserId="3082" LastActivityDate="2015-11-13T08:23:09.300" Title="Cannot open share when user name contains @" Tags="|release-freya|pantheon-files|" AnswerCount="0" CommentCount="0" ClosedDate="2015-11-18T11:36:36.053" ContentLicense="CC BY-SA 3.0" />
  <row Id="2956" PostTypeId="1" CreationDate="2015-11-13T16:51:31.537" Score="1" ViewCount="323" Body="&lt;p&gt;My bluetooth device stopped working after one of the updates a few months ago. Opening Settings -&gt; Bluetooth shows nothing and i also cannot add a device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terminal typing &quot;bluetooth&quot; gives 'bluetooth = none (no device)'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can i do to get this to work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is an Acer Aspire V3-371&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -nnk outputs:&#xA;    Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)&#xA;        Subsystem: Foxconn International, Inc. Device [105b:e07d]&#xA;        Kernel driver in use: ath9k&#xA;&#xA;and lsusb outputs:&#xA;Bus 002 Device 003: ID 0489:e076 Foxconn / Hon Hai &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsmod | grep ath - outputs:&#xA;ath3k                  17427  0 &#xA;bluetooth             446409  12 bnep,ath3k,btusb,rfcomm&#xA;ath9k                 141379  0 &#xA;ath9k_common           25638  1 ath9k&#xA;ath9k_hw              446521  2 ath9k_common,ath9k&#xA;ath                    29006  3 ath9k_common,ath9k,ath9k_hw&#xA;mac80211              652777  1 ath9k&#xA;cfg80211              498458  5 wl,ath,ath9k_common,ath9k,mac80211&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3088" LastEditorUserId="3757" LastEditDate="2016-05-06T08:54:22.113" LastActivityDate="2016-05-06T08:54:22.113" Title="Bluetooth does not work after update" Tags="|ubuntu|bluetooth|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-09T00:21:55.867" ContentLicense="CC BY-SA 3.0" />
  <row Id="2957" PostTypeId="1" CreationDate="2015-11-13T16:56:28.200" Score="1" ViewCount="150" Body="&lt;p&gt;I've never tried dual booting before. It's always been the feature that I've considered meh... Since my sister wants to use windows and I find elementary OS pretty flexible and easy to use with a beautiful interface. I tried to shrink my Disk D Volume to 120GB and then install it on the unallocated space. I'm clearly new to this kind of thing so I probably sound dumb.It just fails. Doesn't even want to start installing. If anyone can tell me what's the problem and how to do it right I would appreciate it a lot.&lt;/p&gt;&#xA;" OwnerUserId="3089" LastEditorUserId="34" LastEditDate="2015-11-23T12:28:54.363" LastActivityDate="2016-01-11T16:56:04.967" Title="How can i dual boot elementary OS Freya and Windows 10" Tags="|dual-boot|" AnswerCount="2" CommentCount="0" ClosedDate="2015-11-18T11:38:46.657" ContentLicense="CC BY-SA 3.0" />
  <row Id="2958" PostTypeId="1" CreationDate="2015-11-13T17:07:18.793" Score="3" ViewCount="145" Body="&lt;p&gt;When I create a playlist, it appears in the left column as it is supposed to. But just after one restart the space is clear and only the smart lists are shown. In the context menu of a song the playlist is shown (the song can be added to it) so it seems not to be deleted. I just can't see it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a fix around and does this occur to others?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: This issue appeared on two different computers with freya installed on them (and even before on luna).&lt;/p&gt;&#xA;" OwnerUserId="3090" LastActivityDate="2015-11-13T17:07:18.793" Title="Playlists in 'Noise' disappear after restart" Tags="|release-freya|music|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-17T18:54:28.767" ContentLicense="CC BY-SA 3.0" />
  <row Id="2959" PostTypeId="2" ParentId="2957" CreationDate="2015-11-13T17:28:34.827" Score="0" Body="&lt;p&gt;If you have Windows 10 already installed, during the installation of elementary OS you can choose for an installation besides Windows 10. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will let you choose how much space you want for elementary OS and Windows and will shrink the harddisk for you!&lt;/p&gt;&#xA;" OwnerUserId="3088" LastEditorUserId="34" LastEditDate="2015-11-19T13:33:49.317" LastActivityDate="2015-11-19T13:33:49.317" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2960" PostTypeId="2" ParentId="2957" CreationDate="2015-11-13T18:18:18.707" Score="1" Body="&lt;p&gt;I had the same problem as you have. I read at many places including StackOverflow that I need to disable the &quot;Fast Boot (Startup)&quot; and &quot;Hibernate&quot; options in the power options when I'm logged into Windows. I did that, but the problem was not solved. elementary OS was still not able to detect the Windows installation. So here's what I did:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;While logged into Windows, &lt;strong&gt;disable fast boot and hibernation&lt;/strong&gt; in the power settings.&lt;/li&gt;&#xA;&lt;li&gt;Open disk management (you can go there by pressing  keys or just type &lt;strong&gt;disk management&lt;/strong&gt; in the start search). Here you need to have a big enough space that is unallocated (shown in black color). If you do not, then &lt;strong&gt;make some space&lt;/strong&gt; by deleting and moving partitions. Make sure you don't have too many partitions.&lt;/li&gt;&#xA;&lt;li&gt;Boot with elementary OS live drive and while installing, choose &quot;Do something else&quot;, instead of &quot;Erase everything ...&quot;&lt;/li&gt;&#xA;&lt;li&gt;Create &lt;strong&gt;two partitions&lt;/strong&gt; from the unallocated empty space that you see (we created this earlier in step 2). The first partition will be of type &lt;strong&gt;&quot;swap&quot;&lt;/strong&gt; and about 2-3 GB should do good here. The second partition is your linux partition, which you can set to use all the remaining available space. Set the &lt;strong&gt;mount point as &quot;/&quot;&lt;/strong&gt; (root) for the second partition and set it to type &lt;strong&gt;&quot;ext4&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Now continue with the installation, all should work fine. Be careful not to erase a partition with data when making empty space in step 2.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope this helps! Cheers.&lt;/p&gt;&#xA;" OwnerUserId="3091" LastEditorUserId="34" LastEditDate="2016-01-11T16:56:04.967" LastActivityDate="2016-01-11T16:56:04.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2961" PostTypeId="1" AcceptedAnswerId="2962" CreationDate="2015-11-13T18:48:57.937" Score="0" ViewCount="313" Body="&lt;p&gt;When I open a program like firefox, for example, the toolbar looks like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9pXpJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9pXpJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I minimize the windows and reopen it, then the menu 'File, Edit...' etc disappears:&lt;a href=&quot;https://i.stack.imgur.com/2ucH1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2ucH1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does this happen? And how can I make to move it to the left, where there is more space?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2015-11-13T20:09:28.547" Title="Menu in toolbar not appearing" Tags="|applications|menu|" AnswerCount="1" CommentCount="0" ClosedDate="2015-11-18T11:30:01.453" ContentLicense="CC BY-SA 3.0" />
  <row Id="2962" PostTypeId="2" ParentId="2961" CreationDate="2015-11-13T20:09:28.547" Score="3" Body="&lt;p&gt;It looks like you've installed some kind of third-party software in an attempt to emulate the &quot;global menu&quot; from Unity. I would recommend removing this as it appears to be buggy.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-13T20:09:28.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2963" PostTypeId="1" AcceptedAnswerId="2964" CreationDate="2015-11-13T22:42:31.317" Score="9" ViewCount="33816" Body="&lt;p&gt;Is there an elementary os keyboard equivalent to windows ctlr+alt+del that would launch a task manager, process list, ability to set affinity, priority, kill a proces,monitor memory and cpu loads, + performance. Or which ubuntu/software task manager  can I install that is not going to break anything?&lt;/p&gt;&#xA;" OwnerUserId="3093" LastActivityDate="2015-11-14T07:58:02.060" Title="Is there a task manager for elementary os freya?" Tags="|release-freya|applications|pantheon-files|system|" AnswerCount="3" CommentCount="3" ClosedDate="2016-01-30T12:54:56.763" ContentLicense="CC BY-SA 3.0" />
  <row Id="2964" PostTypeId="2" ParentId="2963" CreationDate="2015-11-13T22:52:42.873" Score="12" Body="&lt;p&gt;elementary OS doesn't ship with a system monitor by default. I would recommend installing GNOME System Monitor from Software Center:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eiLYa.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eiLYa.jpg&quot; alt=&quot;GNOME System Monitor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-13T22:52:42.873" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="2965" PostTypeId="1" CreationDate="2015-11-13T23:13:15.833" Score="1" ViewCount="169" Body="&lt;p&gt;Tried to install the nVidia driver, but it always reverts to the default driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way I log in to do this is to enter recovery mode and run fsck and then resume. During these steps it complains about files having future times of less than a day, and then installs a 1.4mb file with the word &quot;yelp&quot; in the name and then it boots straight to the desktop without any login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed elementary oS to boot straight to the desktop with no login. Now, every reboot brings me to a login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What gets the computer to boot correctly is to enter recovery mode, run &lt;code&gt;fsck&lt;/code&gt;, and then resume.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;fsck&lt;/code&gt; reports &quot;Last mount time and write time is in the future (by less than a day, probably due to the hardware clock being incorrectly set) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then it reports it is fixed - both the mount and write - and then it boots as it should.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The bios battery is relatively new, and seems to hold it's info. When I entered the CMOS - one time only - it was using a weird character for the dates year. But it hasn't done that again. Is this a bad battery, corrupt BIOS or something else?&lt;/p&gt;&#xA;" OwnerUserId="3093" LastEditorUserId="2926" LastEditDate="2015-11-22T23:23:55.883" LastActivityDate="2016-08-20T00:16:43.380" Title="Login to desktop failure" Tags="|system|graphic-drivers|settings|" AnswerCount="1" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2966" PostTypeId="2" ParentId="2963" CreationDate="2015-11-14T02:47:56.430" Score="6" Body="&lt;p&gt;One of the GUI-based task manager is &lt;a href=&quot;http://wiki.lxde.org/en/LXTask&quot; rel=&quot;noreferrer&quot;&gt;LXTask&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Lightweight, simple&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Monitors processes&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Can kill processes&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Real GUI&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Installation&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;From Software Center&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;From terminal:(If you are &lt;em&gt;comfortable&lt;/em&gt; with terminal)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lxtask&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uaZFh.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-14T02:47:56.430" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="2968" PostTypeId="2" ParentId="2963" CreationDate="2015-11-14T07:51:15.390" Score="6" Body="&lt;p&gt;If you want to use &lt;em&gt;CLI&lt;/em&gt;, you can use &lt;strong&gt;htop&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Installation&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;From &lt;em&gt;Software Center&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;From terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install htop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;To start &lt;em&gt;htop&lt;/em&gt; you have to run &lt;code&gt;htop&lt;/code&gt; in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can list all the processes with CPU/RAM usage, Overall CPU/RAM usage and more. It can also kill a process. You have to use up and down arrow keys to navigate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/whL1Q.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-14T07:58:02.060" LastActivityDate="2015-11-14T07:58:02.060" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2969" PostTypeId="2" ParentId="2937" CreationDate="2015-11-14T08:58:06.213" Score="4" Body="&lt;p&gt;&lt;strong&gt;Disable Previous Tabs&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings remember-tabs false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Incognito Mode&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unset HISTFILE&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://serverfault.com/questions/149535/how-do-i-clear-history-of-the-bash-logs-also-do-not-log-any-of-my-users-bash&quot;&gt;this&lt;/a&gt; answer for how to make this permanent.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="-1" LastEditDate="2017-04-13T12:14:55.723" LastActivityDate="2015-11-14T08:58:06.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2971" PostTypeId="2" ParentId="2184" CreationDate="2015-11-14T11:17:52.493" Score="0" Body="&lt;p&gt;There is a work around for this, using xdotool. This tool lets you simulate keyboard input and mouse activity, move and resize windows, etc. It does this using X11's XTEST extension and other Xlib functions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here, we are going to find the coordinates of the mouse, and emulate a mouse click on the synapse indicator using a command and set a shortcut key for the command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Install xdotool.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xdotool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2: Move your mouse over the synapse icon and get mouse location&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool getmouselocation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should get output like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;x:1105 y:14 screen:0 window:39845936&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3: Add keyboard shortcut for indicator&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;code&gt;System Settings -&amp;gt; Keyboard -&amp;gt; Shortcuts -&amp;gt; Custom Shortcuts.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the + and enter the below command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool mousemove x y click 1 mousemove restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace &lt;code&gt;x&lt;/code&gt; and &lt;code&gt;y&lt;/code&gt; with the values you got. Set the shortcut as &lt;code&gt;Ctrl + Space&lt;/code&gt; Logout and Login again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Voilà!&lt;/p&gt;&#xA;" OwnerUserId="2625" LastActivityDate="2015-11-14T11:17:52.493" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2972" PostTypeId="1" CreationDate="2015-11-14T11:55:53.217" Score="2" ViewCount="874" Body="&lt;p&gt;The lockscreen I get:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XZo6m.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XZo6m.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get the standard lock screen back?&lt;/p&gt;&#xA;" OwnerUserId="3098" LastEditorUserId="45" LastEditDate="2015-11-14T22:32:09.823" LastActivityDate="2015-11-22T01:42:55.453" Title="How Can I Restore The Greeter (From Unity Greeter to Pantheon Greeter)?" Tags="|release-freya|greeter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2973" PostTypeId="2" ParentId="2972" CreationDate="2015-11-14T13:21:14.053" Score="2" Body="&lt;p&gt;It seems you have &lt;code&gt;unity-greeter&lt;/code&gt; installed on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So remove it with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge unity-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you install unity desktop over Freya, light-locker will be removed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So install &lt;code&gt;light-locker&lt;/code&gt; with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install light-locker&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now reboot - this is required.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2926" LastEditDate="2015-11-22T01:42:55.453" LastActivityDate="2015-11-22T01:42:55.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2974" PostTypeId="1" AcceptedAnswerId="2976" CreationDate="2015-11-14T15:02:28.627" Score="1" ViewCount="685" Body="&lt;p&gt;In general my problem is that I am using &lt;em&gt;elementary OS Freya&lt;/em&gt; and need newer versions of packages to build projects from sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In particular, I tried to fix a bug in Gala. &#xA;But since there was a commit dropping support for &lt;em&gt;mutter&lt;/em&gt; versions below 3.14.4, I was unable to finish the build process. The obvious reason was that the newest version of &lt;em&gt;libmutter-dev&lt;/em&gt; availiable on Freya is 3.12.2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found out there were newer versions of &lt;em&gt;libmutter-dev&lt;/em&gt; for Ubuntu Vivid and tried to install them via &lt;em&gt;apt-pinning&lt;/em&gt;, following &lt;a href=&quot;https://askubuntu.com/a/103338&quot;&gt;this guide&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;/etc/apt/preferences&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package: libmutter-dev&#xA;Pin: release n=vivid&#xA;Pin-Priority: 990&#xA;&#xA;Explanation: Uninstall or do not install any Ubuntu-originated&#xA;Explanation: package versions other than those in the oneiric release&#xA;Package: *&#xA;Pin: release n=trusty&#xA;Pin-Priority: 900&#xA;&#xA;Package: *&#xA;Pin: release o=Ubuntu&#xA;Pin-Priority: -10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, I copied my &#xA;    &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; to &lt;code&gt;/etc/apt/sources.list.d/vivid.list&lt;/code&gt; and replaced all occurences of &lt;em&gt;trusty&lt;/em&gt; with &lt;em&gt;vivid&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After executing &lt;code&gt;apt-get update&lt;/code&gt; and &lt;code&gt;apt-get upgrade&lt;/code&gt; I had to realize that there were a lot of other dependencies for the update to &lt;em&gt;libmutter 3.14.4&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I came to wonder if I really had to add every single package and its dependendent packages to the pinning list. How do other developers handle that problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your answers!&lt;/p&gt;&#xA;" OwnerUserId="3086" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-11-19T13:37:22.767" Title="How to install current packages for elementary OS development/build support?" Tags="|apt|updates|gala|package-management|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2975" PostTypeId="2" ParentId="2897" CreationDate="2015-11-14T17:03:59.473" Score="2" Body="&lt;p&gt;After looking at the bug tracker linked by @elmato, I found an issue about vim being slow.. following the settings described in &lt;a href=&quot;https://bugs.launchpad.net/pantheon-terminal/+bug/1440132/comments/2&quot; rel=&quot;nofollow&quot;&gt;this comment&lt;/a&gt; fixed this issue for me. Relevant excerpt below:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I also mentioned a bug about this.&#xA;  I have found a solution (maybe not the best, but it works).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;This only works if you have nvidia drivers installed.&#xA;  Open the nvidia settings, and under PowerMizer, change to maximum performance.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;I guess the terminal uses the GPU a ton to render, and when it's lowering clock speeds to save power, it's reducing performance of the terminal.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;(from i-r-stuff)&lt;/p&gt;&#xA;" OwnerUserId="3043" LastActivityDate="2015-11-14T17:03:59.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2976" PostTypeId="2" ParentId="2974" CreationDate="2015-11-14T21:55:31.367" Score="0" Body="&lt;p&gt;You're not going to be able to build the latest versions of everything on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment, we're developing the next version of elementary OS on an Ubuntu Xenial base. You'll need to do the same. You can get the latest builds for Ubuntu from &lt;a href=&quot;http://cdimage.ubuntu.com/daily-live/current/&quot; rel=&quot;nofollow&quot;&gt;their website here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're new to development on elementary OS, I would recommend taking a look at our &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow&quot;&gt;Getting Started Guide&lt;/a&gt;. It'll give you a well-rounded overview of using Launchpad/bzr, simple Gtk+ development, CMake, gettext translations, and even Debian packaging.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-11-15T16:59:47.553" LastActivityDate="2015-11-15T16:59:47.553" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2977" PostTypeId="1" CreationDate="2015-11-14T22:25:36.780" Score="1" ViewCount="386" Body="&lt;p&gt;I used the &lt;a href=&quot;http://cinnamon-spices.linuxmint.com/applets/view/90&quot; rel=&quot;nofollow&quot;&gt;System Monitor&lt;/a&gt; spice for cinnamon when I was using Linux Mint. Is there some thing similar for Pantheon that I can use with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="3100" LastEditorUserId="45" LastEditDate="2015-11-14T22:38:56.233" LastActivityDate="2015-11-14T22:38:56.233" Title="Is there a CPU/memory indicator for Pantheon?" Tags="|wingpanel|" AnswerCount="0" CommentCount="2" ClosedDate="2015-11-15T02:16:23.630" ContentLicense="CC BY-SA 3.0" />
  <row Id="2978" PostTypeId="1" CreationDate="2015-11-15T00:36:19.160" Score="3" ViewCount="473" Body="&lt;p&gt;I installed elementary OS Freya via USB alongside Windows 8. It finishes so I reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The screen goes black, then automatically boots as Windows 8.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched on the internet a bit, then found out that I hadn't turned off Fast Boot. I tried changing boot order but to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go on the Advanced Settings, the option above troubleshooting, the things that show up are Normal Boot, GRUB and my USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB didn't do anything I understood so I decided to try installing elementary OS again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I chose to install alongside Windows and was given the option of partitioning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, it didn't show  Windows 8 - just two elementary OS installs.&lt;/p&gt;&#xA;" OwnerUserId="3102" LastEditorUserId="2926" LastEditDate="2015-11-21T08:41:43.867" LastActivityDate="2016-02-19T09:36:32.527" Title="Installed elementary OS Freya alongside Windows 8 but does not show up" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2980" PostTypeId="2" ParentId="513" CreationDate="2015-11-15T05:16:02.980" Score="0" Body="&lt;p&gt;I'd just like to point out that SHA256 hashes now seem to be available on the installation  &lt;a href=&quot;https://elementary.io/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow&quot;&gt;instructions page&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2749" LastActivityDate="2015-11-15T05:16:02.980" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2981" PostTypeId="2" ParentId="2978" CreationDate="2015-11-15T12:42:59.153" Score="1" Body="&lt;p&gt;Check if your HDD with linux is top priority (I know you tried it already, but it's really a common mistake). GRUB manual is also a thing you can find your answer at &lt;a href=&quot;https://www.gnu.org/software/grub/manual/grub.html#Installation&quot; rel=&quot;nofollow&quot;&gt;https://www.gnu.org/software/grub/manual/grub.html#Installation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Plus, all this UEFI stuff (it sounds like your laptop is fairly new, so it should have UEFI) can mess you up. Try turning off Secure Boot in your BIOS (it's really stupid anyway, except, you're afraid of someone breaking into your house with a flash drive and installing virus into PC from BIOS).&lt;/p&gt;&#xA;" OwnerUserId="2392" LastActivityDate="2015-11-15T12:42:59.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2982" PostTypeId="1" CreationDate="2015-11-15T13:59:01.337" Score="4" ViewCount="587" Body="&lt;p&gt;I installed Freya as a dual-boot to Windows. First its not working anyway so I searched the posts and get Grub repaired by purging and fixing it with Boot Repair. That let me boot into Freya some time, but now after updating Freya it will only boot into Freya in recovery mode from grub menu. Same problem is when I told Freya to hibernate it doesnt wake up, shows a blank screen as when I try to boot normal from grub. Any idea whats going wrong?&lt;/p&gt;&#xA;" OwnerUserId="3072" LastActivityDate="2016-08-29T09:17:48.530" Title="OS Freya only boots in recovery mode and doesnt hibernate" Tags="|system-installation|grub|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2984" PostTypeId="1" AcceptedAnswerId="2985" CreationDate="2015-11-15T17:06:58.180" Score="2" ViewCount="1957" Body="&lt;p&gt;I get error message like this &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: GPG error: http://ppa.launchpad.net trusty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY AE0A77A7BFF792D0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;any solutions please...?&lt;/p&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="68" LastEditDate="2015-11-15T17:59:43.883" LastActivityDate="2015-11-16T07:52:39.083" Title="Error: &quot;Signatures couldn't be verified because the public key is not available&quot;" Tags="|pantheon-terminal|ppa|gpg|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2985" PostTypeId="2" ParentId="2984" CreationDate="2015-11-15T17:11:03.387" Score="3" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The proper way to add missing keys (here AE0A77A7BFF792D0)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gpg --keyserver hkp://keyserver.ubuntu.com:80 --recv AE0A77A7BFF792D0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which retrieves the key from ubuntu key server and then &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gpg --export --armor AE0A77A7BFF792D0 | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which adds the key to apt trusted keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following command also do the same but it &lt;em&gt;is considered a security risk and is &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2195579&quot; rel=&quot;nofollow noreferrer&quot;&gt;not recommended&lt;/a&gt;&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys AE0A77A7BFF792D0&#xA; sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Explanation&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;Authentication keys&quot; are usually obtained from the maintainer of the software repository. The public key is a string which identifies that certain repository . From the error message (NO_PUBKEY AE0A77A7BFF792D0) is missing. The command will add that key. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you need explanation about command please refer &lt;a href=&quot;https://help.ubuntu.com/community/Repositories/Ubuntu#Authentication%20Tab&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Extra&lt;/strong&gt; (but useful):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; can only handle 40 keys in &lt;code&gt;/etc/apt/trusted.gpg.d&lt;/code&gt; . After that from  41 key you will get the &lt;code&gt;GPG error &quot;no public key found&quot;&lt;/code&gt; even if you go through all the steps to add the missing key(s). So better to limit the use of PPA's. And is the reason for  @Daniel &lt;a href=&quot;https://elementaryos.meta.stackexchange.com/questions/147/do-not-instruct-people-to-add-ppas-unless-it-is-necessary&quot;&gt;post&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-03-16T16:43:34.427" LastActivityDate="2015-11-15T17:51:31.497" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2986" PostTypeId="1" CreationDate="2015-11-15T17:33:38.670" Score="4" ViewCount="3575" Body="&lt;p&gt;After installing elementary OS the system ran fine at first, but after I restarted my computer today the top menu bar called &lt;a href=&quot;http://launchpad.net/wingpanel&quot; rel=&quot;nofollow&quot;&gt;WingPanel&lt;/a&gt; has gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to get it back? &lt;/p&gt;&#xA;" OwnerUserId="3111" LastEditorUserId="2926" LastEditDate="2015-11-21T08:42:43.080" LastActivityDate="2015-12-04T23:56:19.487" Title="Top menu bar (WingPanel) is missing after reboot" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-07-23T08:24:14.087" ContentLicense="CC BY-SA 3.0" />
  <row Id="2987" PostTypeId="2" ParentId="2984" CreationDate="2015-11-15T17:35:46.767" Score="3" Body="&lt;p&gt;You can use Y-PPA manager:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve this install &lt;code&gt;y-ppa-manager&lt;/code&gt;.To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/y-ppa-manager&#xA;sudo apt-get update&#xA;sudo apt-get install y-ppa-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Explanation&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;command 1: Adds PPA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;command 2 and 3: update and install &lt;code&gt;y-ppa&lt;/code&gt; manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;y-ppa-manager&lt;/code&gt; from terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When main y-ppa-manager window openend,click on &lt;kbd&gt;Advanced&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the advaced list--&gt; click on &lt;strong&gt;Try to import all missing GPG keys&lt;/strong&gt; then click OK.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-15T17:35:46.767" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2988" PostTypeId="2" ParentId="2986" CreationDate="2015-11-15T18:09:02.817" Score="1" Body="&lt;p&gt;If you have, by any chance, tried to install &lt;a href=&quot;https://launchpad.net/synapse-project&quot; rel=&quot;nofollow noreferrer&quot;&gt;Synapse&lt;/a&gt; / &lt;a href=&quot;https://code.launchpad.net/~elementary-apps/synapse-project/indicator-search&quot; rel=&quot;nofollow noreferrer&quot;&gt;indicator-search&lt;/a&gt; then this could be the reason as some versions are known to break WingPanel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to uninstall it by typing (in Terminal):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restart and check if it has any effect. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes and you added a PPA just for this, you should also &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/371/how-do-i-remove-a-ppa&quot;&gt;remove the PPA&lt;/a&gt;.   &lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-15T18:09:02.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2989" PostTypeId="2" ParentId="806" CreationDate="2015-11-15T18:50:36.607" Score="1" Body="&lt;p&gt;According to a &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/324894/comments/37&quot; rel=&quot;nofollow&quot;&gt;comment&lt;/a&gt; on a &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/324894&quot; rel=&quot;nofollow&quot;&gt;similar error message&lt;/a&gt; in Ubuntu  (elementary OS 0.3 is based on Ubuntu 14.04), changing &lt;code&gt;memory_corruption_check_size&lt;/code&gt; in the &lt;a href=&quot;https://help.ubuntu.com/community/BootOptions&quot; rel=&quot;nofollow&quot;&gt;boot options&lt;/a&gt; &lt;strong&gt;could&lt;/strong&gt; solve the issue, maybe:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; memory_corruption_check_size=128K&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;instead of the default&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; memory_corruption_check_size=64K&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note, this is a shot in the dark and I am not sure how to edit Boot Options in elementary. (If someone knows, please edit my question accordingly.)&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-11-15T18:50:36.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2990" PostTypeId="1" CreationDate="2015-11-15T19:11:16.793" Score="1" ViewCount="138" Body="&lt;p&gt;As many, I had to spend some time fixing up the grub-2.02beta bootloader after fresh 0.3.1 install. After many hours of trying to fix it (at the time I didn't know that it was officially recognised bug and thought I had messed up with the install) I finally got it fixed. And now my x220 has a functioning dual boot. But... I want a nice graphical dual boot and I found BURG installation guide. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my question is, will using BURG bypass the grub-2.02beta or are they somehow related to each other? And if BURG fails will there be a shell where I can somehow boot the system like with grub?&lt;/p&gt;&#xA;" OwnerUserId="3107" LastActivityDate="2015-11-15T19:11:16.793" Title="Will installing BURG bypass the Freya 0.3.1 bootloader bug?" Tags="|release-freya|grub|" AnswerCount="0" CommentCount="2" ClosedDate="2019-05-13T06:58:10.050" ContentLicense="CC BY-SA 3.0" />
  <row Id="2991" PostTypeId="2" ParentId="2486" CreationDate="2015-11-15T19:13:40.360" Score="-1" Body="&lt;p&gt;The blog post &lt;a href=&quot;http://blogs.igalia.com/carlosgc/2014/08/01/webkitgtk-2-5-1-good-bye-webkit1/&quot; rel=&quot;nofollow&quot;&gt;WebKitGTK+ 2.5.1: Good bye WebKit1&lt;/a&gt; suggests how to build WebKitGTK+ 2 (if it's not already installed / available):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd webkitgtk&#xA;cmake -DCMAKE_INSTALL_PREFIX= -DCMAKE_INSTALL_LIBDIR=lib -DPORT=GTK -DCMAKE_BUILD_TYPE=Release .&#xA;make&#xA;checkinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Linux from Scratch &lt;a href=&quot;http://www.linuxfromscratch.org/blfs/view/svn/xfce/midori.html&quot; rel=&quot;nofollow&quot;&gt;has instructions for building Midori&lt;/a&gt; with a switch for WebKitGTK+ 2 support. And Midori itself offers info on &lt;a href=&quot;http://midori-browser.org/contribute/&quot; rel=&quot;nofollow&quot;&gt;how-to build with Granite support&lt;/a&gt; (&lt;code&gt;-DUSE_GRANITE=1&lt;/code&gt;). So putting both together I come up with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd midori&#xA;mkdir build &amp;amp;&amp;amp;&#xA;cd    build &amp;amp;&amp;amp;&#xA;&#xA;cmake -DCMAKE_INSTALL_PREFIX=/usr \&#xA;      -DCMAKE_BUILD_TYPE=Release  \&#xA;      -DUSE_ZEITGEIST=OFF         \&#xA;      -DUSE_GTK3=1                \&#xA;      -DCMAKE_INSTALL_DOCDIR=/usr/share/doc/midori-0.5.11 \&#xA;      -DUSE_GRANITE=1             \&#xA;      ..  &amp;amp;&amp;amp;&#xA;make&#xA;checkinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You &lt;strong&gt;could&lt;/strong&gt; try this and report back. What's the worst that could happen? (I'd suggest using a virtual machine, as I have no idea...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note, I have used &lt;a href=&quot;https://wiki.debian.org/CheckInstall&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;checkinstall&lt;/code&gt;&lt;/a&gt; instead of &lt;code&gt;make install&lt;/code&gt; to (hopefully) make it easier to get rid of everything again.&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-11-15T19:13:40.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2992" PostTypeId="1" CreationDate="2015-11-15T19:36:35.867" Score="4" ViewCount="2223" Body="&lt;p&gt;HP Laserjet 2100 with parallel port connection connected. Freya sees it fine and prints fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I want to share it with the LAN, but I can't find any settings to make the printer discoverable. CUPS, and the Printer settings application are installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is no &quot;share&quot; setting like in Ubuntu 14.04. Networking is working great, and I'd rather not use Samba. Where is the setting?&lt;/p&gt;&#xA;" OwnerUserId="3093" LastEditorUserId="2926" LastEditDate="2015-11-21T01:15:52.960" LastActivityDate="2020-12-16T16:09:47.787" Title="Where is the printer sharing setting dialog?" Tags="|release-freya|networking|printer|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="2993" PostTypeId="1" CreationDate="2015-11-15T20:06:37.717" Score="2" ViewCount="335" Body="&lt;p&gt;There is a serious bug when using apt-get autoremove in freya 0.31. E.g. when installing or removing packages, apt-get will indicate packages that are no longer used and suggests to remove them with autoremove.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you then use that command, apt-get will remove also packages that are still in use. When I noticed it, apt-get tried to remove Brasero. My terminal in that case looked like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Die folgenden Pakete wurden automatisch installiert und werden nicht mehr benötigt:&#xA;  ksh libgssdp-1.0-3 libgupnp-1.0-4 libpantheon-files-core0&#xA;  libpantheon-files-widgets0 libunique-3.0-0&#xA;Verwenden Sie »apt-get autoremove«, um sie zu entfernen.&quot; (= the following packages aren't used anymore....use &quot;apt-get autoremove&quot; to remove them)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When using autoremove, the packages to be removed read like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Die folgenden Pakete werden ENTFERNT: (= the following packages will be removed)&#xA;  brasero brasero-cdrkit brasero-common dvd+rw-tools growisofs ksh&#xA;  libbrasero-media3-1 libburn4 libexempi3 libgail-3-0 libgssdp-1.0-3&#xA;  libgupnp-1.0-4 libisofs6 libjte1 libpantheon-files-core0&#xA;  libpantheon-files-widgets0 libtotem-plparser18 libunique-3.0-0&#xA;  libzeitgeist-1.0-1 session-migration&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a hint how to solve this? It seems to be a quite dangerous bug to me, as it could potentially damage your system if you're not attentive enough.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="16827" LastEditDate="2019-05-13T06:54:26.817" LastActivityDate="2019-05-13T06:54:26.817" Title="Serious bug with apt-get autoremove" Tags="|release-freya|aptitude|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="2994" PostTypeId="1" AcceptedAnswerId="3010" CreationDate="2015-11-15T20:28:42.777" Score="7" ViewCount="669" Body="&lt;p&gt;I would like to replace Pantheon Files with Nautilus in Freya 0.3.1. However, this doesn't work properly. After installing Nautilus it does not show in Slingshot. Nor can I add it to the dock because there is no symbol.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then removed Pantheon Files because I thought both programs might be interfering. But to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is possible to start Nautilus from Terminal. But then the following lines show up in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ nautilus&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;nautilus-wipe-Message: Initializing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am using an old MacBook 13&quot; Core2Duo, Early 2008. In other respects, Freya is working just fine.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="45" LastEditDate="2015-12-19T06:28:51.633" LastActivityDate="2015-12-19T06:28:51.633" Title="Why don't certain GNOME apps show in Slingshot?" Tags="|slingshot|apps|nautilus|gnome|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="2995" PostTypeId="1" CreationDate="2015-11-16T01:09:49.667" Score="2" ViewCount="99" Body="&lt;p&gt;I've been trying to install the &lt;a href=&quot;http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&amp;amp;id=UniIPAKeyboard#dfc8e3bf&quot; rel=&quot;nofollow noreferrer&quot;&gt;SIL IPA Unicode Keyboard&lt;/a&gt; to no avail. Steps taken:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Added the packages.sil.org ubuntu trusty repo (they don't have one for elementary or freya)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install ibus-kmfl&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install kmfl-keyboard-ipa&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Configured everything via the instructions here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2371/how-can-i-use-ibus-as-the-default-input-method&quot;&gt;How can I use IBus as the default input method?&lt;/a&gt;. I was able to add the IPA keyboard to the list of active ibus input methods. Added the label to the system tray as per the instructions, but whenever I click on the label, it switches me back to the default (US) keyboard layout.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Additionally, the ibus panel icon does not display in the system tray, even though the option is checked in ibus-settings. So it seems as though Freya is still not recognizing ibus (or at least, my keyboard) as the input source for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anybody else managed to install the IPA keyboard? Or any other custom .kmn file?&lt;/p&gt;&#xA;" OwnerUserId="2668" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-16T01:09:49.667" Title="How to use IPA Keyboard layouts in Freya" Tags="|wingpanel|keyboard|input|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2997" PostTypeId="1" AcceptedAnswerId="2998" CreationDate="2015-11-16T09:34:08.983" Score="2" ViewCount="8639" Body="&lt;p&gt;I have no problem with making Linux Live USBs, but how do I make an installation USB for Windows in GNU/Linux?&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="2926" LastEditDate="2015-11-21T08:42:09.010" LastActivityDate="2015-11-21T08:42:09.010" Title="How can I make an installation USB for Windows 10 in elementary OS?" Tags="|microsoft-windows|usb-drive|live-cd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="2998" PostTypeId="2" ParentId="2997" CreationDate="2015-11-16T10:56:33.903" Score="2" Body="&lt;p&gt;&lt;a href=&quot;http://sourceforge.net/projects/winusb/&quot; rel=&quot;nofollow&quot;&gt;WinUSB&lt;/a&gt; can do that. It is a bit buggy but it gets the job done. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.webupd8.org/2010/10/create-bootable-windows-7-usb-drive.html&quot; rel=&quot;nofollow&quot;&gt;UNetBootin used to be able to do it too&lt;/a&gt;, but I'm not sure if it still works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If both these options don't work, you could install a Windows virtual machine and create the ISO from there. &lt;a href=&quot;https://dev.windows.com/en-us/microsoft-edge/tools/vms/&quot; rel=&quot;nofollow&quot;&gt;Microsoft profides free Windows VM ISO's for 90 days.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-16T10:56:33.903" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="2999" PostTypeId="2" ParentId="2997" CreationDate="2015-11-16T11:21:55.700" Score="1" Body="&lt;p&gt;To create windows live usb, you can use &lt;a href=&quot;http://onetransistor.blogspot.in/2014/09/make-bootable-windows-usb-from-ubuntu.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;WinUSB&lt;/a&gt;.&#xA;But WinUSB is a third-party software, we need to add &lt;a href=&quot;https://askubuntu.com/a/381560/439451&quot;&gt;PPA&lt;/a&gt; to install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before that recommended reading: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2938/how-can-i-identify-a-ppa-is-safe-or-not&quot;&gt;How can I identify a PPA is safe or not&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also UNetBootin really can't be used to create Windows bootable usb sticks, always errors.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can also create live usb using &lt;code&gt;gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from &lt;strong&gt;Software center&lt;/strong&gt; (search &lt;code&gt;disks&lt;/code&gt;),&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or from terminal command: &lt;code&gt;sudo apt-get install gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;disks&lt;/code&gt;--&gt; select respective &lt;code&gt;usb&lt;/code&gt;,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now click on &lt;em&gt;More actions&lt;/em&gt; (double wheel shape) --&gt;select &lt;em&gt;Restore Disk Image&lt;/em&gt; --&gt; navigate to &lt;code&gt;.iso&lt;/code&gt; folder --&gt; select &lt;code&gt;.iso&lt;/code&gt; --&gt; &lt;em&gt;Start restoring&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cIbxC.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-16T11:52:35.900" LastActivityDate="2015-11-16T11:52:35.900" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3000" PostTypeId="1" CreationDate="2015-11-16T16:07:31.397" Score="4" ViewCount="551" Body="&lt;p&gt;When I try to open Scratch, a window appears and I need to use the &lt;code&gt;&quot;force close&quot;&lt;/code&gt; option.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/L15z7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L15z7.png&quot; alt=&quot;Screenshot of force close&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How may I solve this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really like the Scratch UI, so I want to use this application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When try to use &lt;code&gt;scratch-text-editor&lt;/code&gt; from the terminal , I get this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2RYee.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2RYee.png&quot; alt=&quot;Scratch Terminal Errors&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2710" LastEditorUserId="3757" LastEditDate="2016-01-18T14:25:21.957" LastActivityDate="2017-03-08T03:12:23.517" Title="Scratch is not responding when I try to edit a file" Tags="|code|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="3001" PostTypeId="1" AcceptedAnswerId="3014" CreationDate="2015-11-16T17:39:14.833" Score="3" ViewCount="106" Body="&lt;p&gt;I started translating elementary OS into Georgian language. Now I want to test my translations. I can download translated .po or .mo files from Launchpad but where should I place them? &#xA;And one more question. How much time is needed for translations to show up in updates?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your great distro. &lt;/p&gt;&#xA;" OwnerUserId="3118" LastActivityDate="2015-11-17T09:53:02.580" Title="Testing Translation" Tags="|release-freya|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3002" PostTypeId="1" AcceptedAnswerId="3003" CreationDate="2015-11-16T17:52:54.597" Score="10" ViewCount="18613" Body="&lt;p&gt;I'm not interested in cloud storage or anything like that, I just need to share out a folder so that OS X and Windows clients can connect to it. Connecting to shares FROM Elementary OS seems to be built in, but I don't see any &quot;friendly&quot; way to share out a folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="3119" LastActivityDate="2019-12-14T23:28:41.667" Title="How do I create a simple SMB file share?" Tags="|applications|settings|pantheon-files|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3003" PostTypeId="2" ParentId="3002" CreationDate="2015-11-16T18:32:20.770" Score="9" Body="&lt;p&gt;You need to install samba server and make some edits in its config file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install samba samba-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that you have to edit the file &lt;code&gt;/etc/samba/smb.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just add the following (of course for requirements) to the end of the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[SharedFolder1]&#xA;   comment = My shared folder&#xA;   read only = yes&#xA;   path = /home/user/samba/shared_folder1&#xA;   browsable = yes&#xA;   guest ok = yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that you have to (re-)start the samba server:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo service samba restart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the samba daemon does not automatically start on system start, type the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo sysv-rc-conf samba on&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit: For Loki and Juno (Ubuntu 16.04 / 18.04) the commands are:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl start / stop smbd&lt;/code&gt; for start / stop the server and &lt;code&gt;sudo systemctl enable / disable smbd&lt;/code&gt; for autostart the daemon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The displayed name in Windows will be &quot;SharedFolder1&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; In the example above everyone has access to the folder without a password (guest ok = yes) but only in read-only mode (read-only = yes). Maybe &lt;a href=&quot;https://help.ubuntu.com/lts/serverguide/samba-fileserver.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; can also help you.&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="107" LastEditDate="2018-12-10T21:42:17.473" LastActivityDate="2018-12-10T21:42:17.473" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="3004" PostTypeId="1" CreationDate="2015-11-16T19:21:06.177" Score="3" ViewCount="243" Body="&lt;p&gt;Today I tried about 12 Times to install some updates ... without any result:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First problem: The software updater needs about 20 to 30 Minutes to check for the updates, which seems not normal to me (normally not more than 2 minutes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second problem: After authenticate for updates with password there comes the following info: &quot;software updater: Requires installation of untrusted packages. This requires packages from unauthenticated sources.&quot; When I click »okay« the software updater disappears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to install the updates?﻿&lt;/p&gt;&#xA;" OwnerUserId="3123" LastActivityDate="2015-12-18T16:06:00.920" Title="Software updater doesn't work anymore correctly" Tags="|release-freya|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3005" PostTypeId="2" ParentId="3004" CreationDate="2015-11-16T19:51:01.387" Score="3" Body="&lt;p&gt;You will need to open the terminal and type these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Wait after process update's done. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Have you tried that command on your terminal? Then of the end command update and upgrade list what's the result? Any error notes on your terminal?&lt;/p&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="2629" LastEditDate="2015-11-17T07:43:52.530" LastActivityDate="2015-11-17T07:43:52.530" CommentCount="6" CommunityOwnedDate="2015-11-16T19:51:01.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="3006" PostTypeId="1" AcceptedAnswerId="3099" CreationDate="2015-11-16T19:58:56.720" Score="7" ViewCount="5170" Body="&lt;p&gt;Is it possible to force fullscreen in any application in elementary OS? I use Vim in my everyday work, but I would like to use gVim, but I don't see a way to make gVim fullscreen.&lt;/p&gt;&#xA;" OwnerUserId="3124" LastEditorUserId="45" LastEditDate="2015-11-17T02:18:50.843" LastActivityDate="2015-11-22T14:29:34.240" Title="Can I force full screen mode for any application?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3007" PostTypeId="1" CreationDate="2015-11-16T20:23:00.733" Score="1" ViewCount="95" Body="&lt;p&gt;I have tried recovery mode and am currently trying out boot disk repair. So far I have had no luck in repairing it, so any advice would be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://paste.ubuntu.com/13301678/&quot; rel=&quot;nofollow&quot;&gt;Here is a paste&lt;/a&gt; of the boot info.&lt;/p&gt;&#xA;" OwnerUserId="3125" LastEditorUserId="3757" LastEditDate="2016-04-24T03:29:03.610" LastActivityDate="2016-04-24T03:29:03.610" Title="elementary OS stopped booting" Tags="|boot|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3009" PostTypeId="2" ParentId="2486" CreationDate="2015-11-17T02:37:38.093" Score="3" Body="&lt;p&gt;Open up Terminal and do the following things:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure you have the necessary dependencies to compile it. &lt;code&gt;apt-get build-dep&lt;/code&gt; grabs almost everything from packaging, but you'll need to manually get WebKit2Gtk+&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get build-dep midori-granite&#xA;sudo apt-get install libwebkit2gtk-4.0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Branch Midori's source code from Launchpad:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bzr branch lp:midori&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change into the &lt;code&gt;midori&lt;/code&gt; folder you just branched and make a build directory. Then change into that directory. You don't &lt;em&gt;need&lt;/em&gt; to make a separate build directory, but I recommend it because it makes it easy to &quot;clean&quot; the branch in case something goes wrong in your build and you want to try again.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd midori&#xA;mkdir build&#xA;cd build&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Configure CMake with the options necessary to build with Webkit2. If for whatever reason you're not interested in building with Granite, leave off the &lt;code&gt;-DUSE_GRANITE&lt;/code&gt; part&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cmake -DCMAKE_INSTALL_PREFIX=/usr -DHALF_BRO_INCOM_WEBKIT2=true -DUSE_GRANITE=true ../&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Make and test&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make&#xA;./midori/midori&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If everything seems to be great and you want to install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Keep in mind that elementary carries some additional Midori patches in Packaging, so you may notice some small differences (read: breakages). You can &lt;a href=&quot;http://bazaar.launchpad.net/~midori/midori/packaging-granite/files/head:/patches/&quot; rel=&quot;nofollow&quot;&gt;browse those patches here&lt;/a&gt;. Also keep in mind that Midori isn't currently being built with WebKit2 because there are a number of unsolved bugs. You can &lt;a href=&quot;https://blueprints.launchpad.net/midori/+spec/webkit2&quot; rel=&quot;nofollow&quot;&gt;see known bugs here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-17T02:37:38.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3010" PostTypeId="2" ParentId="2994" CreationDate="2015-11-17T05:04:12.143" Score="4" Body="&lt;p&gt;The &lt;code&gt;.desktop&lt;/code&gt; file for nautilus by default shows only when the desktop environment is Unity or Gnome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To show Nautilus on slingshot you'll need to edit the desktop entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit the file &lt;code&gt;/usr/share/applications/nautilus.desktop&lt;/code&gt; with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -H scratch-text-editor /usr/share/applications/nautilus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then change the line &lt;code&gt;OnlyShowIn=GNOME;Unity;&lt;/code&gt; to &lt;code&gt;OnlyShowIn=GNOME;Unity;Pantheon;&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should now appear in slingshot and you'll be able to add to plank too with the same method.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="2926" LastEditDate="2015-11-21T14:28:38.287" LastActivityDate="2015-11-21T14:28:38.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3011" PostTypeId="1" CreationDate="2015-11-17T08:18:11.090" Score="3" ViewCount="2055" Body="&lt;p&gt;On installing Elementary OS I am greeted with GRUB when I restart, however, the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;workaround for this&lt;/a&gt; does not work because I cannot access the drive with Elementary on it. When I do an ls, I am greeted with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: failure reading sector 0x0 from 'hd0'.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am using a blank SSD cleaned with diskpart using Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help!&lt;/p&gt;&#xA;" OwnerUserId="3079" LastActivityDate="2015-11-20T04:00:36.177" Title="Error: failure reading sector 0x0 from 'hd0'" Tags="|system-installation|grub|" AnswerCount="0" CommentCount="4" ClosedDate="2016-09-19T00:15:16.597" ContentLicense="CC BY-SA 3.0" />
  <row Id="3012" PostTypeId="1" AcceptedAnswerId="3091" CreationDate="2015-11-17T08:23:49.537" Score="4" ViewCount="644" Body="&lt;p&gt;I find it puzzling that every time I've cropped an image with Photo Viewer, I'm unable to change the aspect ratio of the crop region (it remains the same as the aspect ratio of the original image). I'm not sure whether Photo Viewer on elementary is the same as the Shotwell Photo Viewer on Ubuntu, which has a small configuration popup when cropping, but the app looks very similar, so I'm thinking the configuration popup should be accessible somewhere? Or if the app isn't the same, is it meant to be this way?&lt;/p&gt;&#xA;" OwnerUserId="2886" LastActivityDate="2017-05-18T19:58:54.870" Title="Can Photo viewer only crop to the aspect ratio of the original image" Tags="|photo-editing|photos|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3013" PostTypeId="1" CreationDate="2015-11-17T08:42:20.957" Score="1" ViewCount="32" Body="&lt;p&gt;While booting the Elementary logo glows, then mouse pointer are displayed and glowing hangs. After 10-15 seconds HDD indicator stops blinking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I enter &quot;Recovery mode&quot; and then chose &quot;Resume&quot; - the system boots OK, but is in low resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the problem must be to do with the Graphics - I have a notebook with Intel + nVidia, but I uninstalled the nVidia drivers because of trouble using them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is wrong with the normal boot that safe boot fixes?&lt;/p&gt;&#xA;" OwnerUserId="3126" LastEditorUserId="2926" LastEditDate="2015-11-21T01:17:00.397" LastActivityDate="2015-11-21T01:17:00.397" Title="OS Luna(AMD64) hangs while booting" Tags="|luna|" AnswerCount="0" CommentCount="0" ClosedDate="2016-08-16T00:28:46.857" ContentLicense="CC BY-SA 3.0" />
  <row Id="3014" PostTypeId="2" ParentId="3001" CreationDate="2015-11-17T09:53:02.580" Score="2" Body="&lt;p&gt;Translation, you are working on today, you will see in the next release Loki. If you want it now, you need to install Pantheon on Ubuntu 16.04 base (I recommend to use VM). &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download and install Xenial &lt;a href=&quot;http://cdimage.ubuntu.com/daily-live/current/&quot; rel=&quot;nofollow&quot;&gt;daily build&lt;/a&gt;. &lt;/li&gt;&#xA;&lt;li&gt;Add repositories with elementary packages using terminal: &lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily -y &amp;amp;&amp;amp; sudo add-apt-repository ppa:elementary-os/os-patches -y&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Update package lists from the repositories and install DE using terminal: &lt;code&gt;sudo apt-get install elementary-desktop&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Upgrade your system: &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot to Pantheon and select Georgian language in settings.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Packages with updated translations appear in repositories everyday, about 9:00 AM on Moscow/Georgian time.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-11-17T09:53:02.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3017" PostTypeId="1" CreationDate="2015-11-17T13:55:29.623" Score="1" ViewCount="817" Body="&lt;p&gt;How to enable menu bar for &lt;code&gt;pantheon-terminal&lt;/code&gt;?&lt;br&gt;&#xA;Is disabled by default in terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I'd prefer if answers didn't require additional things to be installed.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="242" LastEditDate="2015-11-20T18:39:25.303" LastActivityDate="2015-11-20T18:39:25.303" Title="How to enable menu bar for pantheon-terminal" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3018" PostTypeId="2" ParentId="3017" CreationDate="2015-11-17T14:28:28.637" Score="1" Body="&lt;p&gt;There is no menu bar in Pantheon Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to change advanced settings you'll to edit dConf values. For more on how to do that &lt;a href=&quot;https://developer.gnome.org/dconf/&quot; rel=&quot;nofollow&quot;&gt;click here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I might be able to help you more if you tell me what you want to change.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2015-11-17T14:28:28.637" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3022" PostTypeId="2" ParentId="2636" CreationDate="2015-11-17T18:35:58.447" Score="0" Body="&lt;p&gt;This is a bug in GNOME Do and would have to be corrected in Do's source code. See &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/1376530&quot; rel=&quot;nofollow&quot;&gt;this issue in launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since GNOME Do is no longer developed, it will likely never be fixed.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-17T18:35:58.447" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3023" PostTypeId="1" CreationDate="2015-11-17T19:50:07.080" Score="3" ViewCount="1078" Body="&lt;p&gt;When I am trying to boot from my USB to install elementary OS,&#xA; it shows me an error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Could not open &quot;\EFI\BOOT\fallback.efi&quot;: 14.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can you help me?&lt;/p&gt;&#xA;" OwnerDisplayName="user3132" LastEditorUserId="3757" LastEditDate="2016-05-05T07:13:49.613" LastActivityDate="2016-05-05T07:13:49.613" Title="elementary OS Boot Error" Tags="|release-freya|system-installation|boot|uefi|" AnswerCount="2" CommentCount="19" ContentLicense="CC BY-SA 3.0" />
  <row Id="3024" PostTypeId="1" CreationDate="2015-11-18T00:33:38.527" Score="0" ViewCount="384" Body="&lt;p&gt;I got my Mac book Pro back from service and of course I tried booting Elementary OS from USB that was made with Unetbootin and boots on Lenovo x220.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First boot resulted in &lt;em&gt;ACPI PCC probe failed&lt;/em&gt;. Googled it and found solution to hit &lt;em&gt;e&lt;/em&gt; key in grub menu and add &lt;em&gt;nomodeset&lt;/em&gt; in kernel parameters. Tried again and this time I get busybox terminal after this message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;(initramfs) unable to find a medium containing a live file system&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SSs28.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SSs28.jpg&quot; alt=&quot;screenshot of error msg&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas what might be the cause of this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Elementary OS installed on Virtual Box in El Capitan installed and booted without a hick.&lt;/p&gt;&#xA;" OwnerUserId="3107" LastEditorUserId="3757" LastEditDate="2016-03-23T03:35:41.637" LastActivityDate="2016-08-20T19:50:52.650" Title="Can't boot Freya 0.3.1 from USB on Macbook Pro Early 2011" Tags="|boot|usb-drive|macbook|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3025" PostTypeId="2" ParentId="2894" CreationDate="2015-11-18T01:41:55.850" Score="0" Body="&lt;p&gt;Try to delete all swap and ext4 partitions and leave them as &quot;unallocated&quot;, delete all linux&amp;amp;grub&amp;amp;ubuntu folders from the efi boot partition (but NOT the partition), boot to Windows, use Visual BCD edit to again erase all traces of grub&amp;amp;ubuntu from the boot menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when re-installing elementary, choose &quot;alongside Windows&quot; option if it appears, if not, then manually partition, but root and swap only. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you boot into a grub shell, then read this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3107" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-18T01:41:55.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3026" PostTypeId="2" ParentId="3024" CreationDate="2015-11-18T03:36:22.980" Score="1" Body="&lt;p&gt;The &lt;em&gt;possible&lt;/em&gt; fixes:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Check Boot order&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Disable ACPI from BIOS&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the port for the USB_stick connection&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When elemenary is booting from live usb  hit Del/F10  then choose &lt;kbd&gt;F6&lt;/kbd&gt; (Other Options).&lt;/p&gt;&#xA;&lt;p&gt;then check &lt;code&gt;acpi=off&lt;/code&gt; &amp;amp; &lt;code&gt;nodmraid&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-18T03:42:28.260" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3027" PostTypeId="1" AcceptedAnswerId="3033" CreationDate="2015-11-18T07:39:23.717" Score="5" ViewCount="1222" Body="&lt;p&gt;Just booted my laptop running elementary OS today and found the desktop in a window. Cannot move it, cannot maximize it. I can live with it but I don't like this at all. Has this happened before, do you guys have some clues about what can be the cause?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only modification I made was install the theme Arc-Darker and Super Flat Remix icon pack.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this is a elementary OS specific question or maybe a software one but I neither know what piece of software is causing it so... (Tagging Gala because I think it may be it's fault)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oh, here's a pic of the problem, just in case I didn't explained myself well&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JEz3a.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/JEz3a.png&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3133" LastEditorUserId="34" LastEditDate="2015-12-14T17:28:51.963" LastActivityDate="2017-05-23T15:16:46.963" Title="Desktop displayed as a window" Tags="|desktop|gala|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3028" PostTypeId="1" CreationDate="2015-11-18T08:33:27.577" Score="3" ViewCount="3607" Body="&lt;p&gt;What are the alternatives available for pantheon-terminal for elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2926" LastEditDate="2015-11-19T19:00:46.987" LastActivityDate="2015-11-20T12:11:21.680" Title="Are there any alternatives to the default terminal, pantheon terminal?" Tags="|pantheon-terminal|" AnswerCount="5" CommentCount="3" ClosedDate="2015-11-20T18:43:56.587" ContentLicense="CC BY-SA 3.0" />
  <row Id="3029" PostTypeId="2" ParentId="3028" CreationDate="2015-11-18T08:33:27.577" Score="1" Body="&lt;h1&gt;&lt;a href=&quot;http://gnometerminator.blogspot.co.uk/p/introduction.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Terminator&lt;/a&gt;:&lt;/h1&gt;&#xA;&lt;p&gt;Terminator supports multiple terminals windows.You can change the size, colour, give different shapes to the terminal. Its very user friendly.&lt;/p&gt;&#xA;&lt;p&gt;Install from the Software Center or with this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install terminator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To split/open new tab, right click on the terminal.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ypKjW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ypKjW.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-19T21:44:04.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3030" PostTypeId="2" ParentId="3028" CreationDate="2015-11-18T08:34:04.017" Score="4" Body="&lt;h1&gt;&lt;a href=&quot;https://help.gnome.org/users/gnome-terminal/stable/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome Terminal&lt;/a&gt;:&lt;/h1&gt;&#xA;&lt;p&gt;The Gnome terminal supports multiple profiles, you can install from the Software Center or with this command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w6ri2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w6ri2.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-19T21:44:25.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3031" PostTypeId="1" AcceptedAnswerId="3036" CreationDate="2015-11-18T09:15:19.417" Score="-1" ViewCount="876" Body="&lt;p&gt;I have installed multiple terminals. I was able to launch all the terminals from app launcher except &lt;code&gt;gnome-terminal&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;What I have tried so far&lt;/em&gt;:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I followed the link: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1344/how-can-i-change-the-default-terminal-app&quot;&gt;How can I change the default Terminal app?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It changed default terminal to &lt;code&gt;gnome-terminal&lt;/code&gt; (I verified in &lt;code&gt;dconf-tools&lt;/code&gt;) but still I don't find &lt;code&gt;gnome-terminal&lt;/code&gt; in app launcher.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have binded shortcut key to open &lt;code&gt;gnome-terminal&lt;/code&gt;. It's working.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I also tried the command &lt;code&gt;sudo update-alternatives --config x-terminal-emulator&lt;/code&gt; to select available terminals.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also there is no option to keep in dock.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;em&gt;My question&lt;/em&gt;:&lt;/p&gt;&#xA;&lt;p&gt;How to launch &lt;code&gt;gnome-terminal&lt;/code&gt; from app launcher and how to lock it to dock?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-05-07T04:00:30.600" Title="Unable to launch gnome-terminal from app launcher" Tags="|pantheon-terminal|slingshot|" AnswerCount="1" CommentCount="1" ClosedDate="2015-11-18T13:55:31.193" ContentLicense="CC BY-SA 3.0" />
  <row Id="3033" PostTypeId="2" ParentId="3027" CreationDate="2015-11-18T11:45:38.333" Score="5" Body="&lt;p&gt;It is because of the Nemo file manager. Nemo could be installed by other applications as a dependency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove the desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill nemo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Pkill will stop the nemo process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To run Nemo without an desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nemo --no-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the desktop comes up after boot you'll have to remove it from statup applications in the system settings. (settings -&gt; applications -&gt; startup applications).&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2629" LastEditDate="2015-11-18T13:11:46.843" LastActivityDate="2015-11-18T13:11:46.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3035" PostTypeId="2" ParentId="2097" CreationDate="2015-11-18T12:53:01.710" Score="1" Body="&lt;p&gt;You will be asked for password while connecting to the caldav, and you can store the passwd for later.&#xA;&lt;br /&gt;Try to use username without &amp;quot;@mysite.com&amp;quot;, it should work (it did for me).&lt;/p&gt;&#xA;&lt;p&gt;BR,&#xA;&lt;br /&gt;l.&lt;/p&gt;&#xA;" OwnerUserId="3135" LastEditorUserId="3135" LastEditDate="2021-11-10T11:58:48.247" LastActivityDate="2021-11-10T11:58:48.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="3036" PostTypeId="2" ParentId="3031" CreationDate="2015-11-18T13:38:32.093" Score="1" Body="&lt;p&gt;I think you question is similar to this one:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/2994/2461&quot;&gt;Why don&amp;#39;t certain GNOME apps show in Slingshot?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a look in the file in &lt;code&gt;/usr/share/applications/gnome-terminal.desktop&lt;/code&gt;. It must have a &lt;strong&gt;OnlyShowIn&lt;/strong&gt; entry. Remove it or add &lt;strong&gt;Pantheon&lt;/strong&gt; there.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-07T04:00:30.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3037" PostTypeId="2" ParentId="2993" CreationDate="2015-11-18T13:52:57.710" Score="3" Body="&lt;p&gt;Autoremove removes packages installed automatically for dependencies. So, if you need to keep that package, it needs to be installed itself, not as a dependency. Simply remove the package and reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not a bug, it's more like a design choice by the devs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two tips:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;IMHO, using a wrapper to apt-get, like aptitude or synaptic, saves a lot of headache like the one you had.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;That is not an elementary OS-specific question. You might have a better help if you ask in a more generic board like &lt;a href=&quot;https://unix.stackexchange.com&quot;&gt;https://unix.stackexchange.com&lt;/a&gt; or &lt;a href=&quot;http://www.askubuntu.com&quot; rel=&quot;nofollow&quot;&gt;askubuntu.com&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="34" LastEditDate="2016-01-11T16:55:58.510" LastActivityDate="2016-01-11T16:55:58.510" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3039" PostTypeId="1" CreationDate="2015-11-18T16:29:10.880" Score="3" ViewCount="3065" Body="&lt;p&gt;I have trouble with updating a new installed elementary OS 0.3.1 Freya (64-bit) system.&#xA; The software updater starts and after a while fails: &quot;Failed to download repository information. Check your Internet connection&quot;. &lt;strong&gt;My Internet connection works fine.&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on the &quot;settings&quot; option in that message I got the &quot;updates&quot; tab with security updates checked and the others unchecked. When trying to check other options I ran into problems like described &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/446/problem-selecting-update-sources-in-gui-software-updates-updates?s=1|0.8436&quot;&gt;here&lt;/a&gt; and followed the advice to uncheck all double entries in the software-updater.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed also the advice &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2809/multiple-users-report-update-error?s=5|0.1938&quot;&gt;from here&lt;/a&gt; to remove the cache with a &lt;code&gt;sudo rm /var/cache/apt/*.bin&lt;/code&gt; command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I close the settings the system takes some time and then I got the message: &quot;Not all updates can be installed Run a partial upgrade, to install as many updates as possible ...&quot; when I click the option &quot;Partial Upgrade&quot; I get the message &quot;Can not upgrade. An upgrade from 'freya' to 'trusty' is not supported with this tool.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open the Software Updater again and choose the &quot;Continue&quot; option this time I get a new message: &quot;Updated software is available for this computer. Do you want to install it now? Under &quot;Details of updates&quot; there is a list of software with check-boxes. checked is: &lt;code&gt;LibreOffice Base, LibreOffice Impress, VLC Media Player, 7z und 7za Archivierungsprogramm, HTML-Syntaxprüfer, LibreOffice component for bulding da..., Video-Dekodierungs und Präsentation..., e Ubuntu base. and an info: 15,6 MB will be downloaded.&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on &quot;Install now&quot; for a short time a message window &quot;installing&quot; pops up to be replaced short after with a message &quot;Requires installation of untrusted packages. This requires installing packages from unauthenticated sources.&quot; With the option &quot;settings&quot; I get again in the window/panel with settings and the problem mentioned before. With a click on &quot;ok&quot; the Software Updater just quits.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried the solution mentioned &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3004/software-updater-doesnt-work-anymore-correctly?s=4|0.2780&quot;&gt;here&lt;/a&gt;&#xA;and run in terminal with root apt-get update (in fact I tried this before several times) But it did not help for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got errormessages like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;From Software Updater:&#xA;&#xA;W:Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/freya/main/source/Sources 404  Not Found , W:Failed to fetch... , W:Failed to fetch http://de.archive.ubuntu.com/ubuntu/dists/trusty/Release  Unable to find expected entry 'contrib/source/Sources' in Release file (Wrong sources.list entry or malformed file) , E:Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&#xA;From apt-get update:&#xA;&#xA;W: Fehlschlag beim Holen von http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/freya/main/source/Sources 404  Not Found   ...&#xA;&#xA;W: Fehlschlag beim Holen von http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/dists/freya/main/binary-i386/Packages 404  Not Found   E: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For a solution it maybe is of interest that I struggled a lot with dual-boot elementary os alongside a pre-installed Win7 on Acer TMP 645. Finally got it work with rEFInd Bootmanager renamed and replaced into the windows-bootmanager place (seems the firmware / microsoft bootmanager prevents linux from adding new bootloaders to the EFI and deletes them every time on restart). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I indeed installed extra software: rEFInd of course and some extra software through the software center yesterday. The error messages I get from apt-get point to http://  security.debian.org and to ppa.launchpad.net/elementary-os/stable/... Before the extra software installed yesterday I also tried to update/upgrate with apt-get and already got the error message for the ppa.launchpad.net/elementary-os/stabel/ branch. Since the name of the branch contains &quot;elementary-os&quot; I wounder if i could/should disable/uninstall these packages as suggest in an earlier answer to this questions on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3004/software-updater-doesnt-work-anymore-correctly?s=4|0.2780&quot;&gt;Software updater doesn&amp;#39;t work anymore correctly&lt;/a&gt; . It seems to me pointing to the core part of the elementary distro?! And if I should so that - how could I do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;note: I am well conneted to the internet, that is not the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help and advice Olaf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I posted the content of apt-get update and of /etc/apt/sources.list to paste.ubuntu (see links in comments to this post)&lt;/p&gt;&#xA;" OwnerUserId="3136" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-02-21T12:16:02.950" Title="Software update fails to work" Tags="|release-freya|updates|" AnswerCount="1" CommentCount="12" ClosedDate="2016-02-23T10:39:29.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="3040" PostTypeId="1" CreationDate="2015-11-18T16:59:47.617" Score="1" ViewCount="176" Body="&lt;p&gt;During instalation, right after partitioning, the process is stopped and I get the message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;can't umount /cdrom&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;From searching the web I noticed this is an old bug from Ubuntu installer, but all the workarounds presume some knowledge of bash and the ability to run a terminal alongside the installer, both of which I lack. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have suggestions? &lt;/p&gt;&#xA;" OwnerUserId="3137" LastEditorUserId="2708" LastEditDate="2015-12-02T11:31:54.757" LastActivityDate="2015-12-02T11:31:54.757" Title="Can't umount /cdrom" Tags="|system-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3041" PostTypeId="1" CreationDate="2015-11-18T19:45:40.277" Score="5" ViewCount="164" Body="&lt;p&gt;I think the question has been asked before, but seems was left without an answer. &#xA;What is the possible workaround to have different keyboard layouts for different windows? Are there any 3rd-party apps that can solve this issue?&lt;/p&gt;&#xA;" OwnerUserId="148" LastActivityDate="2016-12-15T00:49:39.760" Title="Sticky keyboard layout" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3042" PostTypeId="1" CreationDate="2015-11-18T20:02:56.763" Score="8" ViewCount="13375" Body="&lt;p&gt;I am a new elementary OS user and I just installed it on a PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation took place as normal. However, when I put the password in and it begins to login after 3 seconds the screen goes black and back to screen users.&lt;/p&gt;&#xA;" OwnerUserId="3139" LastEditorUserId="2926" LastEditDate="2015-11-19T19:03:52.640" LastActivityDate="2023-10-19T20:12:21.803" Title="New install has a login loop" Tags="|system-installation|" AnswerCount="6" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3043" PostTypeId="1" CreationDate="2015-11-18T22:01:58.603" Score="1" ViewCount="127" Body="&lt;p&gt;I am unable to open the applications menu after the last update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3141" LastEditorUserId="2461" LastEditDate="2015-11-19T12:18:24.557" LastActivityDate="2017-03-02T20:54:35.083" Title="Unable to open Slingshot after last update" Tags="|applications|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3044" PostTypeId="2" ParentId="3039" CreationDate="2015-11-18T23:04:22.073" Score="0" Body="&lt;p&gt;I am not shure, but maybe this could be part of the solution: I followed the links in ppa.launchpad.net/elementary-os/... that are broken and step by step deleted from the end of the URL the parts between two / symbols. Resulting the first URL that works is: &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/&lt;/a&gt; and there are two relative new folders build on 4 oct 2015: &quot;devel&quot; and &quot;trusty&quot;. Maybe the structure of the repository has been changed recently from absolut names (e.g. luna, freya,...) to names relative to the status of the distribution (devel, trusty) but it was forgotten to update the URL in the sourcelist file?!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: &#xA;It seems I was on the right track. See answer to this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3050/recent-change-in-elementary-os-repository-structure&quot;&gt;question&lt;/a&gt;. It seems that it is a bug in the current (as of 20nov2015) freya 0.3.1 distribution. So this is what you have to do when you run into the same problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;go to /etc/apt/sources.list.d&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and change &quot;freya&quot; to &quot;trusty&quot; in the pathes. i.e.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;change in elementary.list the path from&#xA;deb &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; freya main&lt;br&gt;&#xA;deb-src &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; freya main&lt;br&gt;&#xA;to&lt;br&gt;&#xA;deb &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; trusty main&lt;br&gt;&#xA;deb-src &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; trusty main  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;change in patches.list from&lt;br&gt;&#xA;deb &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; freya main&lt;br&gt;&#xA;deb-src &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; freya main&lt;br&gt;&#xA;to&lt;br&gt;&#xA;deb &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; trusty main&lt;br&gt;&#xA;deb-src &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; trusty main  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;then running sudo apt-get update shoud work fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: you need root-priviliges to change the files. I edited them with scratch and stored the files in my home documents archive. Then used terminal mv and cp commands to replace the old files with the new ones. There might be a more convenient way to do this.&lt;/p&gt;&#xA;" OwnerUserId="3136" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-20T15:24:28.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3046" PostTypeId="2" ParentId="2978" CreationDate="2015-11-19T00:34:41.783" Score="1" Body="&lt;p&gt;if you are still searching for a solution this may help. I had a similar problem with installing elementary OS alongside a preinstalled Windows 7 on an Acer TMP 645 Notebook. The Problem in place seems to be that some UEFI firmware together with the Microsoft bootmanager prevents you from registering new bootloader or altering the priority order of bootloaders. It is: everything you edit from elementary OS with efibootmgr is reverted after the next reboot of the computer. I solved the Problem by using rEFInd bootmanager instead / alongside the grub bootmanager and putting it in the place where the system / Windows expect the Windows bootmanager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find instructions on how to download and install rEFInd here: &lt;a href=&quot;http://www.rodsbooks.com/refind/&quot; rel=&quot;nofollow&quot;&gt;http://www.rodsbooks.com/refind/&lt;/a&gt;&#xA;rEFInd scans your system for bootable OS and can boot Windows as Linux alike. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing rEFInd you can find it on the EFI partition on your computer. You can boot into a elementary live system from DVD or USB-drive and than &#xA;1. move the original Microsoft bootmanager into a different place and &#xA;2. move the rEFInd bootmanager into the place, where the Microsoft bootmanager was (renaming it as if it is the Microsoft one). &#xA;For more detailed instructions read this part of the documenatation: &lt;a href=&quot;http://www.rodsbooks.com/refind/installing.html#naming&quot; rel=&quot;nofollow&quot;&gt;http://www.rodsbooks.com/refind/installing.html#naming&lt;/a&gt;&#xA;Note for this operations you need to run the Terminal with root priviliges (type sudo -s). To get the work done the commands cd for changing the directory you work in, ls for listing the files in a directory, cp for copying and rm for removing files/directories will be helpful. google for documentation. For information where your EFI partition is situated the program gparted gives you an overview of your partitions and their respective naming in Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After rebooting the system you should find a grafic menu with all OS on your system. You may find your elementary OS two times. This is because rEFInd find the bootloader in the EFI partition and the bootable file in the partition where you installed elementary os to. You can find more informations to fine tune this in the online documentation of rEFInd.&lt;/p&gt;&#xA;" OwnerUserId="3136" LastActivityDate="2015-11-19T00:34:41.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3047" PostTypeId="1" CreationDate="2015-11-19T04:32:01.613" Score="4" ViewCount="6396" Body="&lt;p&gt;last night I tried to resolve the suspend issue in my laptop with elementary OS by installing Netext73 optimizer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I am unable to use my pendrives. (The led indicator works; mouse/keyboard works but no pendrives).&#xA;On doing &lt;code&gt;sudo fdisk -l&lt;/code&gt;, it recognizes the pen drive(but does not mount). The following is the output:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Disk /dev/sda: 500.1 GB, 500107862016 bytes&#xA;255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors&#xA;Units = sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 4096 bytes&#xA;I/O size (minimum/optimal): 4096 bytes / 4096 bytes&#xA;Disk identifier: 0x0003bda2&#xA;&#xA;Device Boot      Start         End      Blocks   Id  System&#xA;/dev/sda1   *        2048   968517631   484257792   83  Linux&#xA;/dev/sda2       968519678   976771071     4125697    5  Extended&#xA;Partition 2 does not start on physical sector boundary.&#xA;/dev/sda5       968519680   976771071     4125696   82  Linux swap / Solaris&#xA;&#xA;Disk /dev/sdb: 15.8 GB, 15804137472 bytes&#xA;255 heads, 63 sectors/track, 1921 cylinders, total 30867456 sectors&#xA;Units = sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 512 bytes&#xA;I/O size (minimum/optimal): 512 bytes / 512 bytes&#xA;Disk identifier: 0x0008f5cb&#xA;&#xA;Device Boot      Start         End      Blocks   Id  System&#xA;/dev/sdb1   *        2048    30867455    15432704    c  W95 FAT32 (LBA)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;P.S. The suspend issue still persists.&lt;/p&gt;&#xA;" OwnerUserId="3145" LastEditorUserId="3145" LastEditDate="2015-11-19T04:58:38.693" LastActivityDate="2022-06-19T00:10:33.197" Title="USB drives are not recognized" Tags="|usb-drive|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3048" PostTypeId="1" CreationDate="2015-11-19T08:29:05.417" Score="1" ViewCount="165" Body="&lt;p&gt;Recently I liked to install &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow&quot;&gt;freya&lt;/a&gt; instead of Ubuntu.  But whenever I open  music player and import mp3 songs.  It shows file corrupted. And delete it.  But in my music are all playing well in all other play forms. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2015-11-19T10:06:31.017" LastActivityDate="2016-03-18T13:37:34.437" Title="Freya Asus X55C mp3 is not playing" Tags="|release-freya|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3050" PostTypeId="1" AcceptedAnswerId="3086" CreationDate="2015-11-19T10:20:47.313" Score="2" ViewCount="1178" Body="&lt;p&gt;Has there be in recent time (mor exactly on 4 oct 2015) a change to the structure of the elementary OS repository in ppa.launchpad.net/elementary-os/stable/ubuntu/dists/ changing URL pattern from .../freya/... to .../trusty/...?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: Meanwhile I got so much frustrated with trying to fix problems with elementary OS that I made a totally new install and still did run into the problem with broken update links for ppa.launchpad.net/elementary-os/stable/ubuntu/dists/freya/... so I edited elementary.list and patches.list in /etc/apt/sources.list.d/ into the .../trusty/... pattern. Result: No more errors on apt-get update and apt-get distro-upgrade but after restarting I do not get the elementary &quot;e&quot; logo on booting the system. I do not know if this is only a cosmetic problem or if it is a symptom that I lost something important from elementary OS. The desktop still looks and feels like elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Background of my question:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed this week elementary Os from a fresh download of the live-version named elementaryos-stable-0.3.1-amd64.20150903.iso and run into problems with apt-get update giving me &quot; 404  Not Found&quot; error messages on fetching data from URLs like  &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/freya/main/binary-amd64/Packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/freya/main/binary-amd64/Packages&lt;/a&gt; . Entering that URL into a Browser the site does not exist. What I found was a working URL: &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/trusty/main/binary-amd64/Packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/trusty/main/binary-amd64/Packages&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking further into the repository I found two new folders in http:  ppa.launchpad.net/elementary-os/stable/ubuntu/dists/ created on 4 Oct 2015: &quot;devel&quot; and &quot;trusty&quot;. Now I wonder if the repository structure has been changed from hard-coding the elementary OS distribution-version code-names like &quot;luna&quot;, &quot;freya&quot;,... into one fix name for the next version development trunk (devel) and a trunk with the code-name of the ubuntu LTS-version on that the current stable elementary-os version is based on (trusty). (Maybe this makes it easier to install elementary as Desktop Environment on top of an existing Ubuntu installation.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That could explain why the current elementary-distro 0.3.1 from 3 sep 2015 does not know about the new URL and fails to update. If so, I could rename the respective URLs in my local /etc/apt/sources.list file from .../freya/... to .../trusty/... and it should work. But as long as I am not shure that I am right on my guess about the change in repository structure I do not want to mess up my elementary OS installation totally by fetching wrong update lists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find more information on my update problem in this question: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3039/software-update-fails-to-work/3044#3044&quot;&gt;Software update fails to work&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any advice&#xA;Olaf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I could not write all URLs correctly because the forum system allows only for max. of 2 working URls in my posts.&lt;/p&gt;&#xA;" OwnerUserId="3136" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-07T04:31:19.407" Title="Recent change in elementary OS repository structure?" Tags="|release-freya|updates|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3051" PostTypeId="2" ParentId="3048" CreationDate="2015-11-19T10:51:48.377" Score="1" Body="&lt;p&gt;I have same problem solved after installing &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: Use &lt;kbd&gt;Tab&lt;/kbd&gt; when EULA appear in terminal.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-19T11:05:14.103" LastActivityDate="2015-11-19T11:05:14.103" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3052" PostTypeId="1" CreationDate="2015-11-19T11:48:27.400" Score="1" ViewCount="94" Body="&lt;p&gt;Basically, the HDMI Output of my computers (Mac and Windows) is only sending audio or video through the HDMI output, if a recognizable device is listed as a playback device, which I can choose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, for example, if I connect my PC HDMI Output of my computer to the HDMI Input of my Beamer, it is only possible to send Video data through the HDMI to the beamer, because the beamer is not recognized as an audio device(it has no speakers), only as a video device. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem for me is, that I would like to send both (audio and video) through the HDMI Output, even though there is no video or sound device recognized. The reason why I want to achieve that is the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My further TV Boxes are using HDMI output to send video/audio out. They don't care, if my beamer has audio speakers or not, nevertheless they send the audio out. So what I do is, I use this advantage and I extract the audio sound with a HDMI splitter and then I can send it to an external sound system. So it's pretty nice, I just use a HDMI switcher for all my HDMI devices and then I just select the one, which I want to use and finally, the beamer receives the video signal and the audio system the audio signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, when I want to connect my PC or Mac to my current system, it only sends the video signal through it, because my beamer is recognized as a video device and it won't send audio, because it thinks, that there is no audio device on HDMI connected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I solve this problem? Is there maybe a software, which can force it to send audio through the HDMI? Or maybe a mini A/V Box, which acts as a video and audio device, but it only forwards the signal?&lt;/p&gt;&#xA;" OwnerUserId="3148" LastActivityDate="2015-11-19T11:48:27.400" Title="Sending A/V through HDMI out, even though there is only a video device connected" Tags="|sound|hardware|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3053" PostTypeId="2" ParentId="3043" CreationDate="2015-11-19T12:20:49.187" Score="3" Body="&lt;p&gt;If Slingshot doesn't respond you can restart it with the terminal command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;In loki (0.4)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;In freya (0.3)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall slingshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will be automatically restarted by the cerbere watchdog.&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="578" LastEditDate="2017-03-02T20:54:35.083" LastActivityDate="2017-03-02T20:54:35.083" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3054" PostTypeId="2" ParentId="2620" CreationDate="2015-11-19T12:36:18.317" Score="0" Body="&lt;p&gt;The problem is most likely the file &lt;code&gt;~/.local/share/nasc/nasc.sheets&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start NaSC again after you deleted this file.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-11-19T12:36:18.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3055" PostTypeId="1" CreationDate="2015-11-19T13:32:15.977" Score="1" ViewCount="10" Body="&lt;p&gt;I installed elementary OS earlier this week and since than after every log-in (even log-in after wake-up from hibernate) one or two big empty windows with the titel &quot;download elementary os&quot; pop up and disapear after a while. It is kind of annoying, and well obviously I already downloaded elementary OS, otherwise I could not run it on my computer. I am running freya 0.3.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody know how to disable this empty windows poping up?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any advice&#xA;Olaf&lt;/p&gt;&#xA;" OwnerUserId="3136" LastActivityDate="2015-11-19T13:32:15.977" Title="empty window with title &quot;download elementary os&quot; pops up after every log-in" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-19T18:42:36.410" ContentLicense="CC BY-SA 3.0" />
  <row Id="3056" PostTypeId="2" ParentId="2686" CreationDate="2015-11-19T13:32:32.980" Score="1" Body="&lt;p&gt;Do you know which files were not imported? This could be an issue of missing codecs and a confusing error message (for example &lt;code&gt;.wma&lt;/code&gt; instead of &lt;code&gt;.mp3&lt;/code&gt; or &lt;code&gt;.ogg&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to install additional codecs to play some non-free media formats by installing &lt;a href=&quot;https://help.ubuntu.com/community/RestrictedFormats&quot; rel=&quot;nofollow noreferrer&quot;&gt;Restricted Extras&lt;/a&gt; via Terminal as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work you could also try to install additional gstreamer plugins.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2411/how-can-i-play-wma-files-with-music&quot;&gt;How can I play .wma files with Music?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-19T13:32:32.980" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3057" PostTypeId="1" AcceptedAnswerId="3238" CreationDate="2015-11-19T14:44:19.047" Score="2" ViewCount="45" Body="&lt;p&gt;I've noticed that some of my newer games will cause that dialogue box to pop-up during their initial loading screens. It seems like if it takes more than 5 or 10 seconds to load a game, the OS freaks out and thinks it's hung.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to increase the amount of time before the OS decides a process might need to be forceably terminated?&lt;/p&gt;&#xA;" OwnerUserId="3149" LastEditorUserId="45" LastEditDate="2015-11-19T19:42:35.783" LastActivityDate="2015-11-28T07:01:00.913" Title="Can I increase the amount of time before I'm asked to force quit an app?" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3058" PostTypeId="2" ParentId="17" CreationDate="2015-11-19T15:00:37.627" Score="5" Body="&lt;p&gt;PPA (&lt;a href=&quot;http://en.wikipedia.org/wiki/Personal_Package_Archive&quot; rel=&quot;noreferrer&quot;&gt;Personal Package Archive&lt;/a&gt;) are used to include a specific software to elementary OS. Note that sometimes Ubuntu ppas can break things, but this is rare.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &quot;&lt;strong&gt;safeness&lt;/strong&gt;&quot; of a PPA depends mostly on 3 things:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Who made the PPA&lt;/strong&gt; - An official PPA from WINE or LibreOffice like &lt;strong&gt;ppa:libreoffice/ppa&lt;/strong&gt; compared to a PPA that I created myself are not the same. You do not know me as a PPA maintainer, so the safety is VERY low. However, for the LibreOffice PPA they offer it on their website. This gives a certain safety net to it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;How many users have used the PPA&lt;/strong&gt; - For example, if I have a PPA from &lt;a href=&quot;http://winehq.org&quot; rel=&quot;noreferrer&quot;&gt;http://winehq.org&lt;/a&gt;, Would you trust it if 10 users have it, and 6 of them say it's bad - and to use the one Scott Ritchie offers as &lt;strong&gt;ppa:ubuntu-wine/ppa&lt;/strong&gt; on the official Wine HQ website. It has thousands of users (including me) that use this PPA and trust that it works&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;How updated the PPA is&lt;/strong&gt; - You find out that the last update to a PPA was 20 years ago.. The chance that the PPA will work is close to nothing. The package dependencies that PPA needs are very old and maybe the updated ones change so much code that they wont work with the PPA and possibly break your system if you install any of the packages of that PPA to your system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On top of that, how updated the PPA is influences the decision to use it. Normally there will be a more up to date version, which is one of the main reasons for having a PPA. You do not want Banshee 0.1 or Wine 0.0.0.1 or OpenOffice 0.1 Beta Alpha Omega Thundercat Edition with the latest elementary OS. What you want is a PPA that is updated to your current OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to stick with PPAs that are updated to a stable version and not a unstable, testing or dev version since it might contain bugs. An example of this are the daily Xorg PPAs and Daily Mozilla PPAs. These are not suitable for a production environment.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In summary, always look for the maker/maintainer of the PPA. Always see if many users have used it and always see how updated the PPA is. Places like &lt;a href=&quot;http://www.omgubuntu.co.uk/&quot; rel=&quot;noreferrer&quot;&gt;OMGUbuntu&lt;/a&gt;, &lt;a href=&quot;http://www.phoronix.com/scan.php?page=home&quot; rel=&quot;noreferrer&quot;&gt;Phoronix&lt;/a&gt;, &lt;a href=&quot;http://linux.slashdot.org/&quot; rel=&quot;noreferrer&quot;&gt;Slashdot&lt;/a&gt;, &lt;a href=&quot;http://www.h-online.com/&quot; rel=&quot;noreferrer&quot;&gt;The H&lt;/a&gt; and &lt;a href=&quot;http://www.webupd8.org/&quot; rel=&quot;noreferrer&quot;&gt;WebUp8&lt;/a&gt; are good sources for PPAs that many users have added and tested.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some bleeding edge (PPAs that stay very up to date including adding Alpha, Beta or RC quality software in the PPA) could potentially damage your whole system (in the worst case).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;And why would you want a PPA? The software in the repositories can lag behind a long way. For example, in the Ubuntu 14.04 Trusty repos, Insckape version 0.42 is avaliable. With a PPA, you can get 0.91, with many new features.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's also better in many ways than downloading a &lt;code&gt;.deb&lt;/code&gt; file. These never get updated and can have security flaws that won't be patched automatically on your computer.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-19T15:00:37.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3059" PostTypeId="1" CreationDate="2015-11-19T15:05:23.497" Score="1" ViewCount="1775" Body="&lt;p&gt;I have just installed elementary OS Freya 0.3.1 (32-bit) on the &quot;E&quot; drive. I also have Windows 8 installed in &quot;C&quot; drive. I cannot access any of my &quot;C&quot; and &quot;D&quot; drive files. Can you suggest me methods which could help me access those files?&lt;/p&gt;&#xA;" OwnerUserId="3150" LastEditorUserId="26" LastEditDate="2015-11-20T10:54:19.673" LastActivityDate="2015-11-20T10:54:19.673" Title="How can I access any files on NTFS partitions?" Tags="|ntfs|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3060" PostTypeId="2" ParentId="3042" CreationDate="2015-11-19T15:09:16.067" Score="9" Body="&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F3&lt;/kbd&gt; and login into the terminal with your username and password. Your password will not show &lt;code&gt;*&lt;/code&gt; or anything, but it is being typed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;ls ~ -lah&lt;/code&gt; to list files in your home folder. If in the output the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-rw-------  1 root root   53 Nov 29 10:19 .Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;appears then your .Xauthority file has the wrong permissions. You need to do &lt;code&gt;sudo chown $USER:$USER .Xauthority&lt;/code&gt; and try logging in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't see that line, do &lt;code&gt;ls -ld /tmp&lt;/code&gt;. Check for the first 10 letters in the left: they should read exactly like so: &lt;code&gt;drwxrwxrwt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;drwxrwxrwt 15 root root 4096 Nov 30 04:17 /tmp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If they don't, you need to run the command &lt;code&gt;sudo chmod a+wt /tmp&lt;/code&gt; and check again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If neither of these work, I'd recommend you either&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg-reconfigure lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to reconfigure &lt;code&gt;lightdm&lt;/code&gt; - the login manager.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Or uninstall &lt;code&gt;lightdm&lt;/code&gt;, and reinstall it with this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --reinstall lightdm&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now restart the computer with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -r now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and login again.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To prevent this issue in the future, don't run GUI (Graphical User Interface) programs with &lt;code&gt;sudo&lt;/code&gt;. If you have to (for example to open the file manager) add the &lt;code&gt;-H&lt;/code&gt; flag - so you run &lt;code&gt;sudo -H command-goes-here&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="2926" LastEditDate="2015-11-29T00:28:42.083" LastActivityDate="2015-11-29T00:28:42.083" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3061" PostTypeId="2" ParentId="3059" CreationDate="2015-11-19T15:45:39.160" Score="1" Body="&lt;p&gt;The &lt;em&gt;Possible&lt;/em&gt; fixes:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot in to windows and &lt;strong&gt;shutdown&lt;/strong&gt; completely.Then boot to elementary OS there the partition will mount in read-write mode automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I too follow this when I got similar problem)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;If you want to solve without doing shutdown, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The simple way is using &lt;a href=&quot;http://linux.die.net/man/8/ntfsfix&quot; rel=&quot;nofollow&quot;&gt;ntfsfix&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;ntfsfix is a utility that fixes some common NTFS problems. ntfsfix is NOT a Linux version of chkdsk. It only repairs some fundamental NTFS inconsistencies, resets the NTFS journal file and schedules an NTFS consistency check for the first boot into Windows.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;sudo fdisk -l&lt;/code&gt; to identify &lt;code&gt;ntfs&lt;/code&gt; partition &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ntfsfix /dev/sda3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: replace &lt;code&gt;/dev/sda3&lt;/code&gt; with yours&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are getting the same problem every time, the reason would be Fast Startup feature of Windows 8. Then the &lt;strong&gt;permanent&lt;/strong&gt; solution would be : &lt;a href=&quot;http://itsfoss.com/solve-ntfs-mount-problem-ubuntu-windows-8-dual-boot/&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;Disable Fast Startup in Windows 8&lt;/strong&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-19T16:01:48.593" LastActivityDate="2015-11-19T16:01:48.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3062" PostTypeId="1" CreationDate="2015-11-19T15:46:09.410" Score="9" ViewCount="613" Body="&lt;p&gt;I'm running Freya and I get the following error messages when I try to run the software center from the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    ** (software-center:2639): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-eEmyMEyVbj: Connection refused&#xA;2015-11-19 10:34:11,388 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None'&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-center&quot;, line 130, in &amp;lt;module&amp;gt;&#xA;    app = SoftwareCenterAppGtk3(options, args)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 407, in __init__&#xA;    self.icons)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 79, in __init__&#xA;    self._get_emblems(self.icons)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 199, in _get_emblems&#xA;    pb = icons.load_icon(emblem, self.ICON_SIZE, 0)&#xA;gi._glib.GError: Error opening file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried fixes from the following sources:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2707/software-center-does-not-open-after-update/2800#2800&quot;&gt;Software center does not open after update&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3nb7ep/software_center/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/3nb7ep/software_center/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3rphcc/is_anyone_else_having_problems_with_the_software/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/3rphcc/is_anyone_else_having_problems_with_the_software/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/numix-icon-theme-circle/+bug/1268871&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/numix-icon-theme-circle/+bug/1268871&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;None of them have worked. As a workaround I have synaptic package manager installed but I'm not a fan of it. I have a co-worker running the same version that I have and his software-center is working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something else I can try? Is there something that can be copied from his machine to mine?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the output of &lt;em&gt;apt-cache policy software-center&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;software-center:&#xA;  Installed: 13.10-0ubuntu4.1+elementary2~ubuntu0.3.1&#xA;  Candidate: 13.10-0ubuntu4.1+elementary2~ubuntu0.3.1&#xA;  Version table:&#xA; *** 13.10-0ubuntu4.1+elementary2~ubuntu0.3.1 0&#xA;        999 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     13.10-0ubuntu4.1 0&#xA;        500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 Packages&#xA;     13.10-0ubuntu4 0&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;11-23 Update&lt;/strong&gt;&#xA;I've been working with Ravan and we still haven't been able to get the issue resolved. Anyone else have something I haven't tried yet?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;12-2 Update&lt;/strong&gt;&#xA;Still have not found a solution to this issue. Does anyone another suggestion?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;12-11 Update&lt;/strong&gt;&#xA;After reinstalling the humanity and elementary icons I get the same error message except the top line has changed to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (software-center:1984): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-jF09oYYZXw: Connection refused&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;12-15 Update&lt;/strong&gt;&#xA;Full output of new error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (software-center:29012): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-jF09oYYZXw: Connection refused&#xA;2015-12-15 08:56:59,262 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None'&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-center&quot;, line 130, in &amp;lt;module&amp;gt;&#xA;    app = SoftwareCenterAppGtk3(options, args)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 407, in __init__&#xA;    self.icons)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 79, in __init__&#xA;    self._get_emblems(self.icons)&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/panes/historypane.py&quot;, line 199, in _get_emblems&#xA;    pb = icons.load_icon(emblem, self.ICON_SIZE, 0)&#xA;gi._glib.GError: Error opening file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="573" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-06T13:55:28.573" Title="Software center won't open" Tags="|release-freya|appcenter|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3063" PostTypeId="2" ParentId="3041" CreationDate="2015-11-19T16:10:29.323" Score="4" Body="&lt;p&gt;Open system settings and click Keyboard:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u93Tk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u93Tk.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click the Layout tab and change the slider:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ccvbg.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ccvbg.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-19T16:10:29.323" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3064" PostTypeId="2" ParentId="2052" CreationDate="2015-11-19T16:11:43.970" Score="-1" Body="&lt;p&gt;Open system settings and click Keyboard:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u93Tk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u93Tk.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click the Layout tab and change the slider:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ccvbg.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ccvbg.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-19T16:11:43.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3065" PostTypeId="2" ParentId="3028" CreationDate="2015-11-19T17:16:54.773" Score="1" Body="&lt;h1&gt;&lt;a href=&quot;https://konsole.kde.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Konsole&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Konsole is a terminal emulator for the K Desktop Environment.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EXk9u.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EXk9u.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Installation:&lt;/p&gt;&#xA;&lt;p&gt;you can install from the Software Center or with this command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install konsole&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-20T12:11:21.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3067" PostTypeId="1" CreationDate="2015-11-19T18:23:06.613" Score="3" ViewCount="522" Body="&lt;p&gt;So I mapped my network drives to my machine. The server transfer speeds are fine, but it takes a long time to load the folders. like its doing a &quot;mount -a&quot; evry time I open a folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you can see my fstab, where i mounted the folders&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//192.168.0.101/Werk /media/Werk cifs username=User,password=Mypas&#xA;//192.168.0.101/Media /media/Media cifs username=User,password=Mypas&#xA;//192.168.0.101/back-up /media/Back-up cifs username=User,password=Mypas&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So normally this should work quite snappy, but it even crashes at times and takes forever to load on boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: So i just looked into my dmesg, and is states the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    9.695162] CIFS VFS: Error connecting to socket. Aborting operation.&#xA;[    9.695235] CIFS VFS: cifs_mount failed w/return code = -101&#xA;[    9.696084] CIFS VFS: Error connecting to socket. Aborting operation.&#xA;[    9.696163] CIFS VFS: cifs_mount failed w/return code = -101&#xA;[    9.696285] CIFS VFS: Error connecting to socket. Aborting operation.&#xA;[    9.696342] CIFS VFS: cifs_mount failed w/return code = -101&#xA;[   10.445482] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx&#xA;[   10.445658] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready&#xA;[   10.445845] /dev/vmnet: open called by PID 1292 (vmnet-bridge)&#xA;[   10.445856] /dev/vmnet: hub 0 does not exist, allocating memory.&#xA;[   10.445868] /dev/vmnet: port on hub 0 successfully opened&#xA;[   10.445877] bridge-eth0: up&#xA;[   10.445921] bridge-eth0: attached&#xA;[   10.645675] userif-2: sent link down event.&#xA;[   10.645677] userif-2: sent link up event.&#xA;[   11.653835] userif-2: sent link down event.&#xA;[   11.653839] userif-2: sent link up event.&#xA;[   18.907721] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445296117582394051 new 18445296117583644640 attempts 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I noticed my entire network throttles every odd minute. When I romoved the mounts, it was still there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit 2:&#xA;So i just found out that it&lt;code&gt;s not just an Elementary probem, but more of a samba problem. Since the same problem reappears on other distro&lt;/code&gt;s&#xA;, i will update again when I find a working solution witch alludes my for now.&lt;/p&gt;&#xA;" OwnerUserId="2485" LastEditorUserId="2485" LastEditDate="2015-11-21T11:12:24.813" LastActivityDate="2019-09-03T08:01:50.177" Title="Slow smb mounts" Tags="|pantheon-files|networking|samba|" AnswerCount="1" CommentCount="2" ClosedDate="2019-10-22T03:19:49.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="3070" PostTypeId="2" ParentId="2786" CreationDate="2015-11-19T19:30:21.367" Score="2" Body="&lt;p&gt;This question isn't totally fully answerable. Security is complicated and it largely depends on you, the user. Unsafe behavior, specifically you willingly giving away admin privileges, is the biggest vulnerability in any system. That said, some general kind of security advice:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Use a password and lock your session&lt;/strong&gt;. If someone can walk up to your computer and start using it, you've been compromised.&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Run your updates&lt;/strong&gt;. Security updates are issued regularly. Make sure your system is up to date.&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Don't run Terminal commands from the internet that you don't understand&lt;/strong&gt;. Some people just think it's funny to leave destructive commands out there and some people actually have malicious intent. But it's why there's a warning when pasting things into Terminal. If you don't understand every part of the command or deeply trust the person giving it to you, don't run it.&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Don't install software from PPAs or Deb packages&lt;/strong&gt;. Installing software from 3rd party sources literally gives someone else administrative power on your computer. Don't do it unless you deeply trust the organization you're getting the software from.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-19T19:30:21.367" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3071" PostTypeId="1" AcceptedAnswerId="3237" CreationDate="2015-11-19T20:10:15.667" Score="7" ViewCount="273" Body="&lt;p&gt;When I start an application, I want to move it automatically into another workspace. For example, when I type 'virtualbox' on terminal or on synapse-indicator, I want virtualbox to open in another workspace. Is that possible?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2015-11-28T06:52:41.360" Title="Can I make an application to start in another workspace automatically?" Tags="|applications|workspace|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3072" PostTypeId="1" CreationDate="2015-11-19T20:36:43.977" Score="1" ViewCount="772" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AUGMB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AUGMB.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I restore elementary OS to factory settings? There are some very annoying bugs, and I font know how to fix them. Some of the bugs that I have include in the &quot;status bar&quot; the WiFi indicator is missing, and when I'm in steam or VLC, there icons don't show up there ether.&lt;/p&gt;&#xA;" OwnerUserId="3152" LastEditorUserId="2926" LastEditDate="2015-11-21T08:40:16.680" LastActivityDate="2015-11-21T08:40:16.680" Title="Reset elementary OS to factory settings" Tags="|settings|" AnswerCount="0" CommentCount="0" ClosedDate="2015-11-20T10:38:39.910" ContentLicense="CC BY-SA 3.0" />
  <row Id="3073" PostTypeId="1" AcceptedAnswerId="3077" CreationDate="2015-11-19T21:41:05.420" Score="1" ViewCount="2232" Body="&lt;p&gt;Coming from Mac OS, in terminal I am able to use &lt;code&gt;open .&lt;/code&gt; in terminal which will open a directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am able to semi replicate this with &lt;code&gt;pantheon-files .&lt;/code&gt;, but this returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 21:33:37.889767] Application.vala:155: Files version: 0.2.4&#xA;[INFO 21:33:37.889846] Application.vala:157: Kernel version: 3.19.0-33-generic&#xA;[WARNING 21:33:37.894015] Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-0hpFTi9zyT: Connection refused&#xA;[INFO 21:33:37.930317] Application.vala:85: Report any issues/bugs you might find to http://bugs.launchpad.net/pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To get round the above issue I use &lt;code&gt;pantheon-files . &amp;gt; /dev/null&lt;/code&gt;. However, the command is still running in my terminal session and when I close it in terminal it closes the window I have just opened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question, can I open a directory from terminal without leaving the session open?&lt;/p&gt;&#xA;" OwnerUserId="3116" LastEditorUserId="26" LastEditDate="2015-11-21T08:41:40.843" LastActivityDate="2020-09-18T02:24:24.367" Title="How can I opening a directory from the terminal in a new session?" Tags="|release-freya|pantheon-files|pantheon-terminal|" AnswerCount="4" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3074" PostTypeId="2" ParentId="3073" CreationDate="2015-11-19T21:59:36.480" Score="1" Body="&lt;p&gt;To open file/folder from terminal:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;pantheon-files /path&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: &lt;code&gt;pantheon-files /home/ravan/Downloads&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;xdg-open /path&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: &lt;code&gt;xdg-open /home/ravan/Downloads&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt; 1:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;. (dot) represents the current working directory;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;.. (dot dot) represent the directory one level above the current working directory, often referred to as the parent directory.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 2&lt;/strong&gt;:&#xA; To clarify &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3073/opening-a-directory-from-terminal#comment5419_3073&quot;&gt;comment&lt;/a&gt;-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use terminal after running the command &lt;code&gt;xdg-open /path&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the command instead of the previous one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-open /path ; sleep 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here it will be &lt;code&gt;xdg-open . ; sleep 1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To close terminal automatically:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-open /path ; exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here it would be : &lt;code&gt;xdg-open . ; exit&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-20T14:13:27.447" LastActivityDate="2015-11-20T14:13:27.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3077" PostTypeId="2" ParentId="3073" CreationDate="2015-11-20T03:02:25.793" Score="5" Body="&lt;p&gt;It looks like &lt;code&gt;xdg-open .&lt;/code&gt; is what you're looking for. I'm able to close Terminal without quitting Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other Terminal output can be ignored&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-20T03:02:25.793" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3080" PostTypeId="1" CreationDate="2015-11-20T06:59:37.843" Score="2" ViewCount="108" Body="&lt;p&gt;Working off the latest 0.3.1 build, I had a Freya install running under VirtualBox 5.0.6, everything went great up until I installed Guest Additions (with no errors) and rebooted to a login screen with a black background (user accounts etc. still visible). Upon login, the screen shows that it verified my password, then hangs, goes black, and brings me back to this mysterious black login screen. I have a hunch elementary OS doesn't like one of the VBox drivers, is there a known fix?&lt;/p&gt;&#xA;" OwnerUserId="3155" LastEditorUserId="34" LastEditDate="2015-11-23T12:28:59.650" LastActivityDate="2015-11-23T12:28:59.650" Title="Login crash after Guest Additions install" Tags="|greeter|virtualbox|virtualization|" AnswerCount="0" CommentCount="0" ClosedDate="2019-02-20T16:18:37.203" ContentLicense="CC BY-SA 3.0" />
  <row Id="3081" PostTypeId="1" CreationDate="2015-11-20T08:49:19.680" Score="3" ViewCount="533" Body="&lt;p&gt;I am currently using elementary OS Freya with my Lenovo G510. It has a 4th generation Intel Core i3, with Intel HD graphics. I was searching for some answers regarding the screen tearing I am experiencing with Freya. I found a solution from this &lt;a href=&quot;https://forum.manjaro.org/index.php?topic=7511.0&quot; rel=&quot;nofollow&quot;&gt;forum&lt;/a&gt; and they provide solution by editing the &lt;code&gt;/etc/environment&lt;/code&gt; file and insert this line of text &lt;code&gt;CLUTTER_PAINT=disable-clipped-redraws:disable-culling&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was wondering if there is no harm on my system if I will tried it? Or is there any other way to solve the tearing issue?&lt;/p&gt;&#xA;" OwnerUserId="3156" LastEditorUserId="26" LastEditDate="2015-11-20T11:01:35.290" LastActivityDate="2017-02-26T06:21:02.113" Title="Is this a safe solution to Screen Tearing on Freya with Intel i3 Integrated Graphics?" Tags="|display|graphics|intel|lenovo|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3082" PostTypeId="2" ParentId="3028" CreationDate="2015-11-20T10:46:11.290" Score="2" Body="&lt;h1&gt;&lt;a href=&quot;http://invisible-island.net/xterm/xterm.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Xterm&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The xterm program is a terminal emulator for the X Window System.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CvAAy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CvAAy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Instalation:&lt;/p&gt;&#xA;&lt;p&gt;you can install from the Software Center or with this command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xterm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-20T12:09:24.757" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3084" PostTypeId="2" ParentId="3028" CreationDate="2015-11-20T10:48:58.683" Score="4" Body="&lt;h1&gt;&lt;a href=&quot;https://github.com/Guake/guake&quot; rel=&quot;nofollow noreferrer&quot;&gt;Guake&lt;/a&gt;&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Guake is a dropdown terminal made for the GNOME desktop environment.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OndZ8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OndZ8.png&quot; alt=&quot;Guake&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Instalation:&lt;/p&gt;&#xA;&lt;p&gt;you can install from the Software Center or with this command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install guake&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-20T12:08:50.950" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3085" PostTypeId="1" CreationDate="2015-11-20T14:51:48.503" Score="1" ViewCount="196" Body="&lt;p&gt;After upgrading a fresh installed elementary OS freya 0.3.1 64bit with apt-get dist-upgrade on start up (booting the computer) and shut-down instead of the &quot;e&quot; logo appears a fast running list of commands on display. The elementary desktop seems not to be affected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I already looked at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1603/why-does-my-elementary-os-freya-show-an-ubuntu-logo&quot;&gt;this&lt;/a&gt; question. But it does not affect me, because in the info panel in system settings the &quot;e&quot; logo appears correctly on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember when I ran &lt;code&gt;apt-get dist-upgrade&lt;/code&gt; during the upgrade process I was confronted with a simple graphical choice within the terminal that stated something like &quot;there is a new grub version but your existing grub version was modified&quot; giving me the option to &quot;use version from packet manager&quot; &quot;use existing version&quot; and &quot;show the difference&quot;. I tried showing the difference but did not understand what the difference is. So I choose to use the new version from the packet manager since I wanted to upgrade my installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume maybe I should have stayed with the than existing (old) modified version of grub? Maybe the modification was just to include the &quot;e&quot; logo instead of running messages too fast to read? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If so my question is:&lt;/strong&gt;&lt;br&gt;&#xA;1. does this affect any more than the start-up display?&lt;br&gt;&#xA;2. How can I revert to the modified grub without reinstall the whole elementary OS?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it is of interest that between fresh install and update/upgrade I did only one thing: I changed in &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; in the file elementary.list the broken update links pointing to &lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu freya main&lt;/code&gt;  to &lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu trusty main&lt;/code&gt; and in patches.list from  &quot;&lt;code&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu freya main&lt;/code&gt;&quot; to  &quot;&lt;code&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu trusty main&lt;/code&gt;&quot; since no subdirectory &lt;code&gt;freya&lt;/code&gt; exists on ppa.launchpad.net and Freya is build on Trusty. (see the answer to my question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3050/recent-change-in-elementary-os-repository-structure&quot;&gt;here&lt;/a&gt; and the selection options given &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note 2: My question was down-voted. I would like to know why in order to improve my question. And still would like to have answer to my two-fold question above. Especially the second part on how to revert to original start-up screen.&lt;/p&gt;&#xA;" OwnerUserId="3136" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-21T23:33:42.293" Title="missing elementary &quot;e&quot; logo on startup and shut down display" Tags="|release-freya|updates|startup|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3086" PostTypeId="2" ParentId="3050" CreationDate="2015-11-20T14:59:22.653" Score="2" Body="&lt;p&gt;I have it on good authority from within elementary that no repository should ever contain &lt;code&gt;luna&lt;/code&gt;, &lt;code&gt;freya&lt;/code&gt;, or &lt;code&gt;loki&lt;/code&gt;. If your &lt;code&gt;sources.list&lt;/code&gt; ever contained that, they were incorrect, and should be changed to &lt;code&gt;precise&lt;/code&gt;, &lt;code&gt;trusty&lt;/code&gt;, and &lt;code&gt;wily&lt;/code&gt; respectively. As for the changes to the repositories, those are likely unrelated changes to the build structure, and nothing to do with this.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-11-20T14:59:22.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3087" PostTypeId="1" CreationDate="2015-11-20T15:54:23.560" Score="6" ViewCount="291" Body="&lt;p&gt;After resuming from suspend fan is working full speed. Running this  as sudo fixes it:&#xA;&lt;strong&gt;for x in /sys/class/thermal/cooling_device*/cur_state; do  echo 0 &gt; $x;.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where should I put the hook script in order to run on resume? I tried &lt;strong&gt;/lib/systemd/system-sleep&lt;/strong&gt; and &lt;strong&gt;/etc/pm/sleep.d&lt;/strong&gt; to no avail.&lt;/p&gt;&#xA;" OwnerUserId="3158" LastEditorUserId="242" LastEditDate="2015-11-20T18:42:03.180" LastActivityDate="2019-03-18T14:31:56.023" Title="run script on resume from suspend" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3088" PostTypeId="2" ParentId="1966" CreationDate="2015-11-20T18:11:34.400" Score="2" Body="&lt;p&gt;Go to System Settings -&gt; Desktop -&gt; Dock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3BlnF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3BlnF.png&quot; alt=&quot;Dock Setting&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastActivityDate="2015-11-20T18:11:34.400" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3090" PostTypeId="1" CreationDate="2015-11-20T19:09:30.483" Score="5" ViewCount="103" Body="&lt;p&gt;I know that PPAs can be dangerous.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if they were 100% bad, surely nobody would use them - and it wouldn't be so easy to add them onto Ubuntu and elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what are the benefits of a PPA over a &lt;code&gt;.deb&lt;/code&gt; file or installing from the standard repositories?&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-21T05:31:43.417" Title="What benefits does a PPA offer that a .deb or installing from the standard repositories doesn't?" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3091" PostTypeId="2" ParentId="3012" CreationDate="2015-11-20T19:10:44.170" Score="4" Body="&lt;p&gt;The aspect ratio can be changed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9LKAW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9LKAW.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eUrKh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eUrKh.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable it, try running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset-recursively org.yorba.shotwell.crop-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wallpaperscraft.com/image/bear_brown_wet_sits_toed_94311_3840x2400.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Image Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-20T19:10:44.170" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3092" PostTypeId="1" CreationDate="2015-11-20T20:27:21.953" Score="2" ViewCount="389" Body="&lt;p&gt;Running Freya and attempting to get a good looking Conky window displaying. The pictures in the link only two ways I've been able to get it even display.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lX7Pp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/lX7Pp.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Image #1 is with these settings&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Window specifications #&#xA;gap_x 4000&#xA;gap_y 650&#xA;minimum_size 268 620&#xA;maximum_width 268&#xA;own_window yes&#xA;own_window_type normal  # other options are: override/dock/desktop/panel&#xA;own_window_transparent yes&#xA;own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below&#xA;border_inner_margin 0&#xA;border_outer_margin 0&#xA;#alignment middle_middle&#xA;#own_window_argb_visual yes&#xA;#own_window_argb_value 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Image #2 is with these settings&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Window specifications #&#xA;gap_x 4000&#xA;gap_y 650&#xA;minimum_size 268 620&#xA;maximum_width 268&#xA;own_window yes&#xA;own_window_type normal  # other options are: override/dock/desktop/panel&#xA;#own_window_transparent yes&#xA;own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below&#xA;border_inner_margin 0&#xA;border_outer_margin 0&#xA;#alignment middle_middle&#xA;own_window_argb_visual yes&#xA;own_window_argb_value 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Ideally what I'm looking for is image 1, but without all of the weird graphical glitches around it. Can someone point in the right direction settings wise? I've tried changing the value of &lt;em&gt;own_window_argb_value&lt;/em&gt; and &lt;em&gt;own_window_type&lt;/em&gt; with no luck. Either it wouldn't error out but wouldn't display anything, or it would error out and not display anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;12-2 Update&lt;/strong&gt;&#xA;Still no solution for this issue. Does anyone have different settings to try?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the Nvidia binary drivers (340.96) if that helps.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="573" LastEditDate="2015-12-02T18:11:30.377" LastActivityDate="2015-12-02T18:11:30.377" Title="Conky transparency problem" Tags="|release-freya|conky|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3093" PostTypeId="1" CreationDate="2015-11-20T20:34:57.200" Score="5" ViewCount="100" Body="&lt;p&gt;When I get my password wrong it shakes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WLBQR.gif&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WLBQR.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I disable this?&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2016-04-24T05:50:49.880" Title="Can I disable the login area &quot;shaking&quot; when I get my password wrong?" Tags="|greeter|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3094" PostTypeId="1" CreationDate="2015-11-20T22:51:37.650" Score="2" ViewCount="810" Body="&lt;p&gt;I've tried numbers of different PPAs &lt;a href=&quot;http://lmelinux.net/2014/08/11/get-elementary-tweaks-working-freya-beta-1&quot; rel=&quot;nofollow&quot;&gt;from here&lt;/a&gt; and none of them seem to work for me. They're all installed, but the settings menu remains unchanged even after reboot. Any help would be great. It could possibly by user issue on my behalf.&lt;/p&gt;&#xA;" OwnerUserId="3161" LastEditorUserId="2926" LastEditDate="2015-11-21T08:40:25.817" LastActivityDate="2015-11-21T15:34:56.777" Title="OS Freya Tweaks won't display in settings" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ClosedDate="2015-11-21T14:55:26.490" ContentLicense="CC BY-SA 3.0" />
  <row Id="3095" PostTypeId="2" ParentId="3094" CreationDate="2015-11-20T23:58:15.660" Score="1" Body="&lt;p&gt;First, I'd recommend removing all but the PPAs you have added. They're all out of date. To do that use these 3 commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:mpstark/elementary-tweaks-daily&#xA;sudo add-apt-repository -r ppa:bmeznarsic/tweaks-freya&#xA;sudo add-apt-repository -r ppa:versable/elementary-tweaks-isis&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then remove and add this ppa:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge elementary-tweaks&#xA;sudo apt-add-repository -r ppa:justsomedood/justsomeelementary&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then it should be in your settings under Personal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L79Mp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L79Mp.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if it isn't, try a restart and check again. You could also try to search for &quot;Tweaks&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, if that doesn't work, there seems to be an issue with your install of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="2926" LastEditDate="2015-11-21T15:34:56.777" LastActivityDate="2015-11-21T15:34:56.777" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3096" PostTypeId="2" ParentId="2992" CreationDate="2015-11-21T00:31:09.123" Score="4" Body="&lt;p&gt;First open a terminal and launch &lt;code&gt;system-config-printers&lt;/code&gt; or search Slingshot for &quot;System-Config&quot;.&#xA;When it's open it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1mFYu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1mFYu.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click and check it is shared:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BnSOk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BnSOk.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now we have to change the server settings as per this instruction:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hBn9w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hBn9w.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QNOiP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QNOiP.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then check the two check marks &lt;code&gt;Publish shared printers connected to this system&lt;/code&gt; and optionally &lt;code&gt;Allow printing from the internet&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/At97P.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/At97P.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then any computer on the network should be able to see it.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-21T00:31:09.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3097" PostTypeId="2" ParentId="3092" CreationDate="2015-11-21T00:56:02.897" Score="1" Body="&lt;p&gt;That looks like an issue with the transparency of the shadows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;own_window_transparent yes&lt;/code&gt; to &lt;code&gt;own_window_transparent no&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should fix the glitching:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OxCye.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OxCyem.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-21T00:56:02.897" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3098" PostTypeId="2" ParentId="3073" CreationDate="2015-11-21T01:25:09.403" Score="3" Body="&lt;p&gt;To detcach a program from a terminal simply run the command with a &lt;code&gt;&amp;amp;&lt;/code&gt; at the end like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-files . &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then simply press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; and the terminal will close, leaving the program running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This works for anything - even when &lt;code&gt;xdg-open&lt;/code&gt; does not.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="578" LastEditDate="2017-06-07T05:18:41.360" LastActivityDate="2017-06-07T05:18:41.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3099" PostTypeId="2" ParentId="3006" CreationDate="2015-11-21T02:31:29.907" Score="9" Body="&lt;p&gt;You definitely can for gVim. I think this works on most apps, including ones that don't have a full screen mode, for example System Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open up System Settings and click Keyboard and then check you are on the Shortcuts Tab and Windows is selected in the sidebar:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dCgXs.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dCgXs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click on the &quot;Disabled&quot; text in line with the Toggle Full Screen and press a shortcut key of your choice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went for &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;9&lt;/kbd&gt; as it worked in gVim. You could go for something else, but I'd advise against &lt;kbd&gt;F11&lt;/kbd&gt; - or any Function key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/clZ2R.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/clZ2R.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can easily toggle full screen on any app:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IJKjP.gif&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IJKjP.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/Njiol.gif&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Njiol.gif&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="2926" LastEditDate="2015-11-22T14:29:34.240" LastActivityDate="2015-11-22T14:29:34.240" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3100" PostTypeId="2" ParentId="3090" CreationDate="2015-11-21T05:22:28.040" Score="3" Body="&lt;p&gt;The fact that there is no distinguishable difference between installing software through trusted repositories, such as the main repository, and then installing software through a PPA (GUI and CLI)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The main benefit you &lt;em&gt;may&lt;/em&gt; get is, &lt;strong&gt;latest and up to date&lt;/strong&gt; packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Software Center(repositories)  &lt;em&gt;may&lt;/em&gt; not always contain newer version of the package,  even though there are &lt;strong&gt;higher versions&lt;/strong&gt; of the same package in developers' PPAs,  those will only be included in the &lt;strong&gt;next release of the OS&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-21T05:31:43.417" LastActivityDate="2015-11-21T05:31:43.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3101" PostTypeId="1" AcceptedAnswerId="3105" CreationDate="2015-11-21T10:03:12.087" Score="9" ViewCount="3709" Body="&lt;p&gt;I recently changed a few settings in the Software updater; one of them being:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Notify me of a new ubuntu version: For any new version.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;When it rechecked for updates, this message appeared:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The software on this computer is up to date.&#xA;  However, elementary 15.04 is now available (you have 14.04).&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Is it a good idea to perform the upgrade, or should I wait until a new version is released on the elementary.io web page (and revert that setting back to normal)?&lt;/p&gt;&#xA;" OwnerDisplayName="user3163" LastActivityDate="2016-01-06T14:17:42.863" Title="Upgrade elementary to Ubuntu 15.04 'Vivid Vervet'" Tags="|updates|" AnswerCount="2" CommentCount="2" ClosedDate="2016-09-12T15:53:08.530" ContentLicense="CC BY-SA 3.0" />
  <row Id="3103" PostTypeId="1" AcceptedAnswerId="3108" CreationDate="2015-11-21T13:06:53.327" Score="7" ViewCount="7128" Body="&lt;p&gt;I ran &lt;code&gt;scratch-text-editor&lt;/code&gt; in terminal, but now I want to close the terminal without closing scratch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this possible, if so; how?&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-12-23T16:27:10.847" Title="How can I launch a command from terminal and then close the terminal?" Tags="|command-line|code|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3104" PostTypeId="2" ParentId="3103" CreationDate="2015-11-21T13:08:37.670" Score="4" Body="&lt;p&gt;In the future use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor /file/to/open.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor /file/to/open.txt &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note the &lt;code&gt;&amp;amp;&lt;/code&gt; on the end there. That will start it as a separate process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now to close the terminal, simply hit &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you forget to use &lt;code&gt;&amp;amp;&lt;/code&gt; then you can detach it. First press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Z&lt;/kbd&gt; to suspend the program. This can crash some, but it is unlikely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then type &lt;code&gt;bg&lt;/code&gt; to send it to background, and then press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; as above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note, instead of &lt;code&gt;bg&lt;/code&gt; you can use &lt;code&gt;%&lt;/code&gt;. This simply brings it back into the terminal.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="2926" LastEditDate="2015-11-21T17:29:13.450" LastActivityDate="2015-11-21T17:29:13.450" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3105" PostTypeId="2" ParentId="3101" CreationDate="2015-11-21T13:44:55.203" Score="11" Body="&lt;p&gt;There are two reasons why &lt;strong&gt;it's a very bad idea to upgrade&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;elementary OS 0.3 (Freya) is based on Ubuntu 14.04 (Trusty). It will almost certainly not work if you were to update to 15.04 - the packages do not exist for it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;15.04 will be EOL soon; end of life. This means it no will no longer get vital security updates, and so you would need to upgrade &lt;em&gt;again&lt;/em&gt; to 15.10 before January 2016.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS#Version_table&quot; rel=&quot;nofollow noreferrer&quot;&gt;Based on the past release schedule&lt;/a&gt;, elementary OS 0.4 is likely to be based on 16.04 LTS and released around to a year after 16.04 is:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CYx9T.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CYx9T.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should update to elementary OS 0.4 (Loki) when it is released. You should only update to new elementary OS releases, never an Ubuntu release as it has different software sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's sensible to revert that change.&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="2926" LastEditDate="2016-01-06T14:17:42.863" LastActivityDate="2016-01-06T14:17:42.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3106" PostTypeId="2" ParentId="2657" CreationDate="2015-11-21T14:02:22.503" Score="8" Body="&lt;h3&gt;The following commands effectively take the same action a reset button would.&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You could &lt;em&gt;try&lt;/em&gt; to use &lt;code&gt;gsettings&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, create a file with all the keys in it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep '^\S*' &amp;gt; keys.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then loop through that file and reset each key&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;while read line; do echo $line; gsettings reset-recursively $line; done &amp;lt;keys.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This resets all the settings (hopefully).&lt;/p&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="26" LastEditDate="2016-01-27T20:36:00.787" LastActivityDate="2016-01-27T20:36:00.787" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3107" PostTypeId="2" ParentId="3101" CreationDate="2015-11-21T14:09:53.300" Score="7" Body="&lt;p&gt;As the answers before were not that clear IMHO, here's an answer: &lt;strong&gt;No, do not upgrade to the 15.04 base&lt;/strong&gt;. Freya is built upon 14.04 LTS and &lt;em&gt;only that&lt;/em&gt;. elementary OS' repositories do not even contain packages for 15.04 (or 15.10, for that matter). You will end up with a broken installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The updating software unfortunately is still something elementary OS &quot;imports&quot; from Ubuntu. The less you touch it the better for you. There is work being done on &lt;a href=&quot;https://launchpad.net/appcenter&quot;&gt;AppCenter&lt;/a&gt; which should replace the Ubuntu-specific update routine (which is not meant for elementary OS) in Loki.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-11-21T14:09:53.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3108" PostTypeId="2" ParentId="3103" CreationDate="2015-11-21T16:09:36.587" Score="8" Body="&lt;p&gt;You can use:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;nohup&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nohup scratch-text-editor /path/to/file &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then close terminal with &lt;code&gt;Ctrl+D&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want direct in single command: Use &lt;code&gt;exit&lt;/code&gt; at the end of the command. like,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nohup scratch-text-editor /path/to/file &amp;amp; exit&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;setsid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setsid scratch-text-editor /path/to/file ; exit&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;disown&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor /path/to/file &amp;amp; disown ; exit&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;All in one command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(scratch-text-editor /path/to/file &amp;amp;) ; exit&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-21T17:24:25.580" LastActivityDate="2015-11-21T17:24:25.580" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3109" PostTypeId="2" ParentId="3103" CreationDate="2015-11-21T19:51:09.320" Score="0" Body="&lt;p&gt;Simply detach the process from terminal's process to its parent by:&#xA;&lt;code&gt;command-to-run &amp;amp; disown&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3140" LastActivityDate="2015-11-21T19:51:09.320" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3111" PostTypeId="1" CreationDate="2015-11-21T22:54:36.200" Score="1" ViewCount="126" Body="&lt;p&gt;Elementary OS detects OK the hdmi display (digital TV) connected to my laptop port, but when I select it to use, everything displays except the mouse pointer. So, I can't access any program. Your help is appreciated. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2015-11-21T22:54:36.200" Title="External hdmi connected display doesn't show mouse pointer" Tags="|system|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3113" PostTypeId="1" CreationDate="2015-11-21T23:41:19.210" Score="1" ViewCount="202" Body="&lt;p&gt;On my Mac, my Ubuntu and my Phone I have Libre Office.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can install from the repositories with &lt;code&gt;sudo apt-get install libreoffice&lt;/code&gt; but that will install Libre Office 4 - and 5.0 has some great improvements.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I install Libre Office 5.0?&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-21T23:41:19.210" Title="How can I install Libre Office 5.0?" Tags="|software-installation|libreoffice|" AnswerCount="1" CommentCount="1" ClosedDate="2015-11-22T01:58:34.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="3114" PostTypeId="2" ParentId="3113" CreationDate="2015-11-21T23:41:19.210" Score="0" Body="&lt;p&gt;There are 2 ways.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;From the 5.0 PPA (recommended):&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/libreoffice-5-0&#xA;sudo apt-get update&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;From the &lt;code&gt;.deb&lt;/code&gt; files (not recommended):&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;First, visit the Download page. To jump to the &lt;code&gt;.deb&lt;/code&gt; version for &lt;a href=&quot;https://www.libreoffice.org/download/libreoffice-fresh/?type=deb-x86&amp;amp;version=5.0.3&amp;amp;lang=en-GB&quot; rel=&quot;nofollow&quot;&gt;64 bit click here&lt;/a&gt;, or for &lt;a href=&quot;https://www.libreoffice.org/download/libreoffice-fresh/?type=deb-x86&amp;amp;version=5.0.3&amp;amp;lang=en-GB&quot; rel=&quot;nofollow&quot;&gt;32 bit click here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, click Download. Consider using the Torrent file as it reduces the load on their servers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the 229 MB download is finished (which will take 9.5 hours on dial up or 7 minutes on a High Speed T3 connection) you will need to extract the &lt;code&gt;.tar.gz&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to the file in your file manager, right click and chose &quot;Extract Here&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads/LibreOffice5*/DEBS&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, as the &lt;code&gt;README&lt;/code&gt; says you need to run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will take a while, but when the command finishes, you will have Libre Office 5.0&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-21T23:41:19.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3115" PostTypeId="1" AcceptedAnswerId="3116" CreationDate="2015-11-22T03:34:01.077" Score="2" ViewCount="230" Body="&lt;p&gt;How do I enable Pantheon notifications (e.g. for a certain application)? By accident I removed the ability for notifications while using VLC (with dconf editor), and would like to know if I'm able to rectify the mistake.&lt;/p&gt;&#xA;" OwnerUserId="2315" LastActivityDate="2017-08-22T15:52:24.020" Title="Enable Pantheon notifications?" Tags="|notifications|vlc|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3116" PostTypeId="2" ParentId="3115" CreationDate="2015-11-22T04:06:52.703" Score="3" Body="&lt;p&gt;Enable notifications for VLC:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open menu &lt;strong&gt;Tools&lt;/strong&gt; &amp;gt; &lt;strong&gt;Preferences&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/G0HVm.png&quot; alt=&quot;Screenshot of step 1&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now, under &lt;strong&gt;Show settings&lt;/strong&gt;, select the &lt;strong&gt;All&lt;/strong&gt; radio button. Then, from the left sidebar, choose &lt;strong&gt;Control interfaces&lt;/strong&gt;. There, check the &lt;strong&gt;LibNotify Notification Plugin&lt;/strong&gt; checkbox, then click the &lt;strong&gt;Save&lt;/strong&gt; button.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/f7Wj3.png&quot; alt=&quot;Screenshot of step 2&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;By default the notification appears for 4000 ms, i.e. 4 seconds. You can change this duration in the same preferences window, by selecting the &lt;strong&gt;Control interfaces&lt;/strong&gt; &amp;gt; &lt;strong&gt;Notify&lt;/strong&gt; option in the left sidebar.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-08-22T15:52:24.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3117" PostTypeId="1" AcceptedAnswerId="3118" CreationDate="2015-11-22T07:54:48.317" Score="11" ViewCount="13551" Body="&lt;p&gt;I am newbie to Freya and I need to install Skype. I tried to download it from the Skype website but there is no support for Freya. There's only an Ubuntu version &lt;code&gt;.deb&lt;/code&gt;. Now I don't know how to install it. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="4688" LastEditDate="2017-02-19T20:47:09.913" LastActivityDate="2017-02-19T20:47:09.913" Title="How can I install Skype on Freya?" Tags="|release-freya|skype|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3118" PostTypeId="2" ParentId="3117" CreationDate="2015-11-22T08:39:26.463" Score="13" Body="&lt;p&gt;&lt;strong&gt;Removing previous version&lt;/strong&gt;(If you have)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove skype skype-bin:i386 skype:i386&#xA;sudo apt-get install sni-qt:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Clear the old Skype folder before installing latest version.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.Skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Preparing to Installing Skype&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Users of 64-bit  should enable MultiArch if it isn't already enabled by running the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update repositories and &quot;updates&quot; list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;em&gt;Software&amp;amp; Update&lt;/em&gt; --&gt; &lt;em&gt;Other software&lt;/em&gt; tab then &#xA;enable &lt;em&gt;Canonical Partner repository&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KUYWd.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then close --&gt; reload&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install skype&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now open terminal and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://help.ubuntu.com/community/Skype&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-22T09:31:27.480" LastActivityDate="2015-11-22T09:31:27.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3119" PostTypeId="1" CreationDate="2015-11-22T12:03:52.633" Score="3" ViewCount="796" Body="&lt;p&gt;I have a Cybermaxx/Medion MD95132 laptop with a Pentium M Dothan processor (Centrino platform). When I try to install Elementery 32bits the installer says I have to use the parameter 'forcepae'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I add this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some workarounds by creating a bootable USB stick.&#xA;See:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://help.ubuntu.com/community/grub-n-iso&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/grub-n-iso&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://help.ubuntu.com/community/PAE&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/PAE&lt;/a&gt; (it says Dotha supports PAE but&#xA;my experience is otherwise)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Unfortunately my laptop won't boot from USB.&lt;br&gt;&#xA;How can I install elementary on my laptop?&lt;/p&gt;&#xA;" OwnerUserId="3175" LastEditorUserId="242" LastEditDate="2016-03-14T21:27:04.783" LastActivityDate="2016-03-14T21:27:04.783" Title="How to install elementary on a Pentium M laptop without PAE and USB boot?" Tags="|system-installation|" AnswerCount="0" CommentCount="5" ClosedDate="2016-12-05T19:36:50.787" ContentLicense="CC BY-SA 3.0" />
  <row Id="3120" PostTypeId="2" ParentId="1807" CreationDate="2015-11-22T12:38:28.670" Score="2" Body="&lt;p&gt;Use &lt;code&gt;synaptic&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: This method  holds/locks packages when using &lt;code&gt;software-updater&lt;/code&gt; but not with &lt;code&gt;apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install synaptic, open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;I will consider &lt;code&gt;google-chrome-stable&lt;/code&gt; as example:&lt;/sub&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;synaptic&lt;/code&gt; and search for &lt;code&gt;chrome&lt;/code&gt; and select it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Hit &lt;em&gt;Package&lt;/em&gt; in top menu and choose &lt;em&gt;Force version&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the dropdown, select the version you like. ( I am not sure this step is necessary for your requirement )&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Hit &lt;em&gt;Package&lt;/em&gt; in top menu and choose &quot;Lock version&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(then it will change to red color)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now your installed version is locked. Therefore Updater will &lt;strong&gt;no longer notify you any updates until you unlock it&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Similarly apply lock for installed packages.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here I have tested with &lt;code&gt;google-chrome-stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/A1gYn.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9914i.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Before lock&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/IaJYf.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;After lock&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/XQnaW.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-22T13:41:19.240" LastActivityDate="2015-11-22T13:41:19.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3121" PostTypeId="2" ParentId="1807" CreationDate="2015-11-22T13:12:12.617" Score="3" Body="&lt;p&gt;Using CLI: (&lt;strong&gt;Recommended&lt;/strong&gt;, see &lt;a href=&quot;http://pastebin.ubuntu.com/13444886/&quot; rel=&quot;nofollow&quot;&gt;pastebin&lt;/a&gt; and note)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Keeping on hold&lt;/strong&gt;: (suggest: use &lt;em&gt;dpkg&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Apt&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark hold package-name&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Dpkg&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -s &#xA;echo package-name hold | dpkg --set-selections&#xA;apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: Replace &lt;em&gt;package-name&lt;/em&gt; with yours, for example, &lt;code&gt;google-chrome-stable&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Removing a Hold&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Apt&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark unhold package-name&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Dpkg&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -s &#xA;echo package-name install | dpkg --set-selections&#xA;apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: This CLI method can hold/lock packages while updating through &lt;code&gt;apt-get upgrade&lt;/code&gt; and also using &lt;code&gt;software-updater&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here my test with &lt;code&gt;google-chrome-stable&lt;/code&gt;. You can clearly identify even chrome update is available but that is &lt;em&gt;kept back&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy google-chrome-stable&#xA;google-chrome-stable:&#xA;Installed: 44.0.2403.107-1&#xA;Candidate: 46.0.2490.86-1&#xA;Version table:&#xA;    46.0.2490.86-1 0&#xA;       500 http://dl.google.com/linux/chrome/deb/ stable/main amd64 Packages&#xA;*** 44.0.2403.107-1 0&#xA;    100 /var/lib/dpkg/status&#xA;ravan@ravan:~$ sudo apt-get upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages have been kept back:&#xA;  google-chrome-stable&#xA;0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;reference &lt;a href=&quot;https://help.ubuntu.com/community/PinningHowto#Introduction%20to%20Holding%20Packages&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-22T13:44:18.313" LastActivityDate="2015-11-22T13:44:18.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3122" PostTypeId="1" CreationDate="2015-11-22T13:17:28.307" Score="5" ViewCount="715" Body="&lt;p&gt;I'm using freya and had wlan without any problem since weeks/months.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I installed the printer driver for a Canon Pixma MG2950. Because I can't set up this printer for wireless printing in linux I started Win8 and set it up there with the cd rom from the printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this setup there were a notice that the network is shutting down for a short time (or something like that)... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't know if this has something to do with my problem but since that time when I start freya again I see shortly after the desktop is there a bubble which states &quot;the network gots shut down - offline&quot;.&#xA;When I click the WLAN icon all entries there are grayed out :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(connecting a cable still works and I get a working connection)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some debugging infos/outputs from my system &lt;a href=&quot;http://pastebin.com/ihTej3VL&quot; rel=&quot;noreferrer&quot;&gt;http://pastebin.com/ihTej3VL&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;    ======== Wireless-Info START ========&#xA;&#xA;System-Info ~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;zinth-laptop 3.16.0-53-generic x86_64,  elementary OS Freya, freya&#xA;&#xA;CPU    : AMD E1-2500 APU with Radeon(TM) HD Graphics&#xA;Memory : 1438 MB&#xA;Uptime : 13:57:16 up 1 min,  2 users,  load average: 1,18, 0,67, 0,26&#xA;&#xA;&#xA;lspci ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;01:00.0 Ethernet controller [0200]: Qualcomm Atheros QCA8171 Gigabit Ethernet [1969:10a1] (rev 13)&#xA;    Subsystem: Acer Incorporated [ALI] Device [1025:076b]&#xA;    Kernel driver in use: alx&#xA;--&#xA;05:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)&#xA;    Subsystem: Lite-On Communications Inc Device [11ad:0632]&#xA;    Kernel driver in use: ath9k&#xA;&#xA;&#xA;lsusb ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;Bus 002 Device 002: ID 064e:e330 Suyin Corp. &#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 004 Device 003: ID 04ca:300b Lite-On Technology Corp. &#xA;Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 002: ID 045e:07b2 Microsoft Corp. &#xA;Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&#xA;&#xA;PCMCIA Card Info ~~~~~~~~~~~~~~~~~~~&#xA;&#xA;&#xA;&#xA;iwconfig ~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;wlan0     IEEE 802.11bgn  ESSID:off/any  &#xA;          Mode:Managed  Access Point: Not-Associated   Tx-Power=16 dBm   &#xA;          Retry short limit:7   RTS thr:off   Fragment thr:off&#xA;          Power Management:off&#xA;&#xA;&#xA;&#xA;rfkill ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;      Interface                 Soft blocked  Hard blocked&#xA;0: phy0: Wireless LAN               no            no&#xA;1: acer-wireless: Wireless LAN      no            no&#xA;2: hci0: Bluetooth                  no            no&#xA;&#xA;&#xA;lsmod ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;wl                   6367833  0 &#xA;acer_wmi               32522  0 &#xA;sparse_keymap          13948  1 acer_wmi&#xA;ath9k                 141379  0 &#xA;ath9k_common           25638  1 ath9k&#xA;ath9k_hw              446521  2 ath9k_common,ath9k&#xA;ath                    29006  3 ath9k_common,ath9k,ath9k_hw&#xA;mac80211              652777  1 ath9k&#xA;cfg80211              498458  5 wl,ath,ath9k_common,ath9k,mac80211&#xA;wmi                    19193  1 acer_wmi&#xA;video                  20128  1 acer_wmi&#xA;&#xA;&#xA;module parameters ~~~~~~~~~~~~~~~~~~&#xA;&#xA;acer_wmi      (5): brightness=-1 | ec_raw_mode=N | force_series=0 | mailled=-1 | threeg=-1&#xA;ath9k         (6): blink=0 | bt_ant_diversity=0 | btcoex_enable=0 | nohwcrypt=0 | ps_enable=0 | use_chanctx=0&#xA;cfg80211      (2): cfg80211_disable_40mhz_24ghz=N | ieee80211_regdom=00&#xA;mac80211      (5): beacon_loss_count=7 | ieee80211_default_rc_algo=minstrel_ht | max_nullfunc_tries=2 | max_probe_tries=5 | probe_wait_ms=500&#xA;video         (3): allow_duplicates=N | brightness_switch_enabled=Y | use_native_backlight=-1&#xA;wmi           (2): debug_dump_wdg=N | debug_event=N&#xA;&#xA;&#xA;nm-tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;State: disconnected&#xA;================o=============o========o=============o=========o===========o==============o===========&#xA; Interface &amp; ID | Type        | Driver | State       | Default | Speed     | Support      | HW Addr   &#xA;================o=============o========o=============o=========o===========o==============o===========&#xA; wlan0          | 802.11 WiFi | ath9k  | unavailable | no      |           | WEP/WPA/WPA2 | &#xA;----------------+-------------+--------+-------------+---------+-----------+--------------+-----------&#xA; eth0           | Wired       | alx    | unavailable | no      |           |              | &#xA;----------------+-------------+--------+-------------+---------+-----------+--------------+-----------&#xA;&#xA;&#xA;NetworkManager.state ~~~~~~~~~~~~~~~&#xA;[main]&#xA;NetworkingEnabled=true&#xA;WirelessEnabled=true&#xA;WWANEnabled=true&#xA;WimaxEnabled=true&#xA;&#xA;&#xA;NetworkManager.conf ~~~~~~~~~~~~~~~~&#xA;&#xA;[main]&#xA;plugins=ifupdown,keyfile,ofono&#xA;dns=dnsmasq&#xA;&#xA;[ifupdown]&#xA;managed=false&#xA;&#xA;&#xA;NM WiFi Profiles ~~~~~~~~~~~~~~~~~~~&#xA;&#xA;EasyBox-76D950       : ssid=EasyBox-76D950 | mac-address= | ipv4=auto | ipv6=auto &#xA;FRITZ!Box 7272       : ssid=FRITZ!Box 7272 | mac-address= | ipv4=auto | ipv6=auto &#xA;Linux                : ssid=Linux | mac-address= | ipv4=auto | ipv6=auto &#xA;Zinth                : ssid=Zinth | mac-address= | ipv4=auto | ipv6=auto &#xA;&#xA;&#xA;interfaces ~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;# interfaces(5) file used by ifup(8) and ifdown(8)&#xA;auto lo&#xA;iface lo inet loopback&#xA;&#xA;resolv.conf ~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;&#xA;&#xA;Routes &amp; Ping ~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;Kernel-IP-Routentabelle&#xA;Ziel            Router          Genmask         Flags Metric Ref    Use Iface&#xA;&#xA;&#xA;iw reg get ~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;(Region : de_AT.UTF-8)&#xA;country 00:&#xA;    (2402 - 2472 @ 40), (3, 20)&#xA;    (2457 - 2482 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS&#xA;    (2474 - 2494 @ 20), (3, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS&#xA;    (5170 - 5250 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS&#xA;    (5735 - 5835 @ 40), (3, 20), PASSIVE-SCAN, NO-IBSS&#xA;&#xA;&#xA;iwlist chan ~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;wlan0     13 channels in total; available frequencies :&#xA;          Channel 01 (2.412 GHz) - 13 (2.472 GHz)&#xA;&#xA;&#xA;iwlist scan ~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;wlan0     Scan completed :&#xA;          Cell 01 - Address: &#xA;                    Channel:1&#xA;                    Frequency:2.412 GHz (Channel 1)&#xA;                    Quality=37/70  Signal level=-73 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;Waldmann&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s&#xA;                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s&#xA;                              36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=0000018e0a262704&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;                    IE: WPA Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : TKIP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 02 - Address: &#xA;                    Channel:1&#xA;                    Frequency:2.412 GHz (Channel 1)&#xA;                    Quality=26/70  Signal level=-84 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;allgaeudsl-mh&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                              9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=0000006192ebddbc&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;                    IE: WPA Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : TKIP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 03 - Address: &#xA;                    Channel:2&#xA;                    Frequency:2.417 GHz (Channel 2)&#xA;                    Quality=22/70  Signal level=-88 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;allgaeudsl-r&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                              9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=000000766934f900&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : CCMP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 04 - Address: &#xA;                    Channel:4&#xA;                    Frequency:2.427 GHz (Channel 4)&#xA;                    Quality=24/70  Signal level=-86 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;allgaeudsl-rm&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                              9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=00000acf2e02d6c6&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;                    IE: WPA Version 1&#xA;                        Group Cipher : TKIP&#xA;                        Pairwise Ciphers (1) : TKIP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 05 - Address: &#xA;                    Channel:10&#xA;                    Frequency:2.457 GHz (Channel 10)&#xA;                    Quality=70/70  Signal level=-31 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;Linux&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                              9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=00000012844f7d5d&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : CCMP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 06 - Address: &#xA;                    Channel:10&#xA;                    Frequency:2.457 GHz (Channel 10)&#xA;                    Quality=34/70  Signal level=-76 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;Linux&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s&#xA;                    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s&#xA;                              36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=000002e46e03f56a&#xA;                    Extra: Last beacon: 8ms ago&#xA;                    IE: IEEE 802.11i/WPA2 Version 1&#xA;                        Group Cipher : CCMP&#xA;                        Pairwise Ciphers (1) : CCMP&#xA;                        Authentication Suites (1) : PSK&#xA;          Cell 07 - Address: &#xA;                    Channel:10&#xA;                    Frequency:2.457 GHz (Channel 10)&#xA;                    Quality=22/70  Signal level=-88 dBm  &#xA;                    Encryption key:on&#xA;                    ESSID:&quot;allgaeudsl&quot;&#xA;                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                              9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                    Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                    Mode:Master&#xA;                    Extra:tsf=0000000cda5b3339&#xA;                    Extra: Last beacon: 8ms ago&#xA;&#xA;&#xA;blacklist ~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;[/etc/modprobe.d/blacklist-ath_pci.conf]&#xA;blacklist ath_pci&#xA;&#xA;[/etc/modprobe.d/blacklist-bcm43.conf]&#xA;blacklist b43&#xA;blacklist b43legacy&#xA;blacklist ssb&#xA;blacklist brcm80211&#xA;blacklist brcmfmac&#xA;blacklist brcmsmac&#xA;blacklist bcma&#xA;&#xA;&#xA;modinfo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;[wl]&#xA;filename:       /lib/modules/3.16.0-53-generic/extra/wl.ko&#xA;srcversion:     9A49255BA90267D99664757&#xA;depends:        cfg80211&#xA;parm:           passivemode:int&#xA;parm:           wl_txq_thresh:int&#xA;parm:           oneonly:int&#xA;parm:           piomode:int&#xA;parm:           instance_base:int&#xA;parm:           nompc:int&#xA;parm:           intf_name:string&#xA;&#xA;[acer_wmi]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/platform/x86/acer-wmi.ko&#xA;srcversion:     97414F2256FC3B7919CD979&#xA;depends:        wmi,sparse-keymap,video&#xA;parm:           mailled:Set initial state of Mail LED (int)&#xA;parm:           brightness:Set initial LCD backlight brightness (int)&#xA;parm:           threeg:Set initial state of 3G hardware (int)&#xA;parm:           force_series:Force a different laptop series (int)&#xA;parm:           ec_raw_mode:Enable EC raw mode (bool)&#xA;&#xA;[ath9k]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko&#xA;srcversion:     CED1D76477A777795A07D73&#xA;depends:        ath9k_hw,mac80211,ath9k_common,cfg80211,ath&#xA;parm:           debug:Debugging mask (uint)&#xA;parm:           nohwcrypt:Disable hardware encryption (int)&#xA;parm:           blink:Enable LED blink on activity (int)&#xA;parm:           btcoex_enable:Enable wifi-BT coexistence (int)&#xA;parm:           bt_ant_diversity:Enable WLAN/BT RX antenna diversity (int)&#xA;parm:           ps_enable:Enable WLAN PowerSave (int)&#xA;parm:           use_chanctx:Enable channel context for concurrency (int)&#xA;&#xA;[ath9k_common]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko&#xA;srcversion:     265A5990B1258ECC29235FC&#xA;depends:        cfg80211,ath9k_hw,ath&#xA;&#xA;[ath9k_hw]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko&#xA;srcversion:     0D1161FC3B202FBE214F25D&#xA;depends:        ath&#xA;&#xA;[ath]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/net/wireless/ath/ath.ko&#xA;srcversion:     165C1DF76AF8C8B6A45DA4F&#xA;depends:        cfg80211&#xA;&#xA;[mac80211]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/net/mac80211/mac80211.ko&#xA;srcversion:     477882071593B10E01388C8&#xA;depends:        cfg80211&#xA;parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)&#xA;parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)&#xA;parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)&#xA;parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)&#xA;parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)&#xA;&#xA;[cfg80211]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/net/wireless/cfg80211.ko&#xA;srcversion:     046346857FD53951C911443&#xA;depends:        &#xA;parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)&#xA;parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)&#xA;&#xA;[wmi]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/platform/x86/wmi.ko&#xA;srcversion:     347CF30B94B5549A75865A8&#xA;depends:        &#xA;parm:           debug_event:Log WMI Events [0/1] (bool)&#xA;parm:           debug_dump_wdg:Dump available WMI interfaces [0/1] (bool)&#xA;&#xA;[video]&#xA;filename:       /lib/modules/3.16.0-53-generic/kernel/drivers/acpi/video.ko&#xA;srcversion:     2C29072BDC57BA9481E70D2&#xA;depends:        &#xA;parm:           brightness_switch_enabled:bool&#xA;parm:           allow_duplicates:bool&#xA;parm:           use_native_backlight:int&#xA;&#xA;&#xA;udev rules ~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;# PCI device 0x1969:0x10a1 (alx)&#xA;SUBSYSTEM==&quot;net&quot;, ACTION==&quot;add&quot;, DRIVERS==&quot;?*&quot;, ATTR{address}==&quot;&quot;, ATTR{dev_id}==&quot;0x0&quot;, ATTR{type}==&quot;1&quot;, KERNEL==&quot;eth*&quot;, NAME=&quot;eth0&quot;&#xA;&#xA;# PCI device 0x168c:0x0036 (ath9k)&#xA;SUBSYSTEM==&quot;net&quot;, ACTION==&quot;add&quot;, DRIVERS==&quot;?*&quot;, ATTR{address}==&quot;&quot;, ATTR{dev_id}==&quot;0x0&quot;, ATTR{type}==&quot;1&quot;, KERNEL==&quot;wlan*&quot;, NAME=&quot;wlan0&quot;&#xA;&#xA;&#xA;Custom files/entries ~~~~~~~~~~~~~~~&#xA;&#xA;/etc/modules        : Default&#xA;/etc/rc.local       : Default&#xA;/etc/modprobe.d     : Not Default&#xA;/etc/pm/(cnf|pw|sl) : Default&#xA;&#xA;[/etc/modprobe.d]&#xA;asus_nb_wmi.conf  : options asus_nb_wmi wapf=4&#xA;iwlwifi.conf      : remove iwlwifi \&#xA;                    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \&#xA;                    &amp;&amp; /sbin/modprobe -r mac80211&#xA;mlx4.conf         : softdep mlx4_core post: mlx4_en&#xA;modesetting.conf  : options cirrus modeset=1&#xA;                    options mgag200 modeset=1&#xA;&#xA;&#xA;Kernel boot line ~~~~~~~~~~~~~~~~~~~&#xA;&#xA;BOOT_IMAGE=/boot/vmlinuz-3.16.0-53-generic root=UUID=a88f5e9f-7602-4a4a-b8a9-4ce07b5e25e4 ro quiet splash vt.handoff=7&#xA;&#xA;&#xA;dmesg ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~&#xA;&#xA;[    0.044298] Initializing cgroup subsys net_cls&#xA;[    0.044327] Initializing cgroup subsys net_prio&#xA;[    2.542754] microcode: Microcode Update Driver: v2.00 , Peter Oruba&#xA;[    2.543708] audit: initializing netlink subsys (disabled)&#xA;[    2.923429] wmi: Mapper loaded&#xA;[    2.966218] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet []&#xA;[    3.003568] [drm] Found VCE firmware/feedback version 40.2.2 / 15!&#xA;[    4.111637] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x254f00)&#xA;[   21.528112] ath: phy0: WB335 1-ANT card detected&#xA;[   21.537009] ath: phy0: Enable LNA combining&#xA;[   21.538629] ath: phy0: ASPM enabled: 0x42&#xA;[   21.538639] ath: EEPROM regdomain: 0x65&#xA;[   21.538642] ath: EEPROM indicates we should expect a direct regpair map&#xA;[   21.538649] ath: Country alpha2 being used: 00&#xA;[   21.538651] ath: Regpair used: 0x65&#xA;[   22.300878] acer_wmi: Acer Laptop ACPI-WMI Extras&#xA;[   22.301134] acer_wmi: Function bitmap for Communication Button: 0x801&#xA;[   22.338549] acer_wmi: Brightness must be controlled by acpi video driver&#xA;[   22.382246] wl: module license 'MIXED/Proprietary' taints kernel.&#xA;[   22.444026] wl: module verification failed: signature and/or  required key missing - tainting kernel&#xA;[   22.500659] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0&#xA;[   29.260630] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   31.049340] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready&#xA;&#xA;    ======== Done ========&#xA;&lt;/pre&gt;&#xA;" OwnerUserId="282" LastActivityDate="2016-08-29T21:25:50.613" Title="No wlan - ath9k (network dialog is grayed out)" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3124" PostTypeId="1" AcceptedAnswerId="3146" CreationDate="2015-11-22T14:21:39.960" Score="6" ViewCount="1285" Body="&lt;p&gt;I read about &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; keyboard Shortcut to change the keyboard layout, but it is not working, despite being defined in System Settings. What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="3177" LastEditorUserId="160" LastEditDate="2016-12-15T00:46:47.357" LastActivityDate="2016-12-15T00:46:47.357" Title="Shortcut to change keyboard layout doesn't work" Tags="|release-freya|keyboard|keyboard-shortcuts|" AnswerCount="3" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3125" PostTypeId="2" ParentId="3124" CreationDate="2015-11-22T16:07:14.170" Score="0" Body="&lt;p&gt;While solving this issue, I messed up something in dconf and results &lt;kbd&gt; Alt&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; stopped working. The shortcut working with other combinations.(Even I have set all settings to : Default Settings)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally &lt;em&gt;reboot&lt;/em&gt; solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-22T16:07:14.170" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3126" PostTypeId="1" CreationDate="2015-11-22T16:36:11.837" Score="1" ViewCount="393" Body="&lt;p&gt;READ THIS FIRST : &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3123/elementary-os-setup-doesnt-detect-my-partitions&quot;&gt;Elementary OS Setup doesn't detect my partitions&lt;/a&gt; &lt;strong&gt;I am author of this, don't mark as duplicate, because i didn't registered there, and deleted all cookies so i was must to question again.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to install the elementary OS alongside Windows (Dual-booting). I have few NTFS partitions, with 500GB Total. But Installation Setup say that my hard drive is empty drive without partitions. It doesn't detect any partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when i try to exit the setup and get to file explorer, all partitions are showed with their data. But only SETUP doesn't detect it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Only 500 GB Empty Drive. Should be 500 GB Drive with much of&#xA;partitions and 60 GB of unallocated space.&lt;/li&gt;&#xA;&lt;li&gt;File Explorer can see all partitions in drive, but Setup doesn't.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Why this even doesn't work?&lt;br&gt;&#xA;Something messed up in Setup?&lt;br&gt;&#xA;Also my installation media is USB.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/00K6V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/00K6V.png&quot; alt=&quot;Screenshot of Disk Managament&quot;&gt;&lt;/a&gt;&#xA;The installation shows up only empty 500 GB Drive.&#xA;But File Explorer can read it at all.&lt;/p&gt;&#xA;" OwnerUserId="3180" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-05T13:49:29.873" Title="elementary OS doesn't detect my partitions" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3127" PostTypeId="1" AcceptedAnswerId="3128" CreationDate="2015-11-22T17:07:37.883" Score="11" ViewCount="40212" Body="&lt;p&gt;When I am trying to sign in my Gmail with existing Geary mail in Freya.  It's failed to login.  And I don't know the problem.  But the username and password both are right. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2015-11-23T00:51:32.523" LastActivityDate="2016-07-17T22:00:12.290" Title="Geary mail is not logging in my Gmail account" Tags="|release-freya|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3128" PostTypeId="2" ParentId="3127" CreationDate="2015-11-22T17:16:14.320" Score="15" Body="&lt;p&gt;The simple workaround would be:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Loginto your gmail account&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on the link : &lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;noreferrer&quot;&gt;Enable access for less secure apps&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Turn ON&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now login to geary. It will work now.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Don't get panic with the word &quot;less secure&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2031/2708&quot;&gt;Gmail: Geary doesn't meet modern security standards&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-22T17:39:05.770" LastActivityDate="2015-11-22T17:39:05.770" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3130" PostTypeId="1" AcceptedAnswerId="3131" CreationDate="2015-11-22T18:33:44.460" Score="7" ViewCount="8026" Body="&lt;p&gt;I have logged into my gmail account from geary. When I tried to remove, I don't find any option to remove. I have only one account in geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to remove user acount(s) from geary?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2019-03-17T07:38:59.473" Title="How to remove account from geary" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3131" PostTypeId="2" ParentId="3130" CreationDate="2015-11-22T18:33:44.460" Score="5" Body="&lt;p&gt;The simple workaround for this is: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Removing the accounts in &lt;code&gt;~/.local/share/pantheon-mail&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have &lt;em&gt;only one&lt;/em&gt; account:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.local/share/pantheon-mail/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you have more than one, Geary &lt;em&gt;may&lt;/em&gt; provide option to delete the account. Because geary doesn't allow you to remove the final account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't have the option to remove,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/.local/share/pantheon-mail&#xA;ls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now identify the account you want to delete and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf account-name&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="13717" LastEditDate="2018-02-21T10:33:17.367" LastActivityDate="2018-02-21T10:33:17.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3132" PostTypeId="1" AcceptedAnswerId="3138" CreationDate="2015-11-22T19:54:21.680" Score="3" ViewCount="272" Body="&lt;p&gt;I am try to create a application in Vala, but I need &lt;code&gt;libsoup&lt;/code&gt; and checkout with this command: &lt;code&gt;pkg-config --list-all | grep soup&lt;/code&gt;. I have &lt;code&gt;libsoup&lt;/code&gt;, but if I try to compiling with this command: &lt;code&gt;valac --pkg gtk+-3.0  libsoup  test.vala&lt;/code&gt;, I get this error message: &lt;code&gt;error: libsoup not found&lt;/code&gt;. My question is what is the problem?&lt;/p&gt;&#xA;" OwnerUserId="3184" LastEditorUserId="26" LastEditDate="2015-11-22T23:30:02.947" LastActivityDate="2015-11-24T08:07:35.247" Title="Why is LibSoup not found when compiling Vala?" Tags="|programming|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3133" PostTypeId="1" CreationDate="2015-11-22T21:08:58.290" Score="3" ViewCount="744" Body="&lt;p&gt;I really have no idea, I can't find the source files anywhere on and Vocal says that it has downloaded them.&lt;/p&gt;&#xA;" OwnerUserId="3186" LastActivityDate="2016-04-06T11:56:57.027" Title="Where does Vocal 2.0 save downloaded podcasts?" Tags="|release-freya|files|download|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3135" PostTypeId="2" ParentId="3133" CreationDate="2015-11-22T22:37:28.663" Score="1" Body="&lt;p&gt;I believe they should be in &lt;code&gt;~/vocal&lt;/code&gt; (or &lt;code&gt;~/.vocal&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2015-11-22T22:37:28.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3136" PostTypeId="2" ParentId="3087" CreationDate="2015-11-22T22:40:13.363" Score="2" Body="&lt;p&gt;This is me answering my question: simply place the script in &lt;strong&gt;/etc/pm/sleep.d&lt;/strong&gt; and install &lt;strong&gt;pm-utils&lt;/strong&gt; with &lt;strong&gt;sudo apt-get install pm-utils&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3188" LastActivityDate="2015-11-22T22:40:13.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3137" PostTypeId="2" ParentId="2686" CreationDate="2015-11-22T23:13:32.953" Score="1" Body="&lt;p&gt;I had the same problem, it was indeed a matter of missing codecs for the open format files were imported. However &lt;strong&gt;I did not want to install&lt;/strong&gt; &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt; since those included several plugins I'd rather not install right now as flash and java.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I solved this by &lt;code&gt;sudo apt-get install gstreamer1.0&lt;/code&gt; which installed a few libs and plugins.&lt;/p&gt;&#xA;" OwnerUserId="3185" LastActivityDate="2015-11-22T23:13:32.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3138" PostTypeId="2" ParentId="3132" CreationDate="2015-11-22T23:49:24.933" Score="1" Body="&lt;p&gt;I am being told by people more knowledgable than myself for Vala that your compile command is not quite right. Every package needs the &lt;code&gt;--pkg&lt;/code&gt; prefix, and you need to specify the full packages name as you have done with &lt;code&gt;gtk+&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Something like &lt;code&gt;valac soup.vala --pkg libsoup-2.4 --pkg gtk+-3.0&lt;/code&gt; should work out a whole lot better for you.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-11-23T07:04:30.013" LastActivityDate="2015-11-23T07:04:30.013" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3139" PostTypeId="1" AcceptedAnswerId="3140" CreationDate="2015-11-23T04:20:49.990" Score="5" ViewCount="3162" Body="&lt;p&gt;I am using windows 7 for my main works. now I am learning Freya gradually to move my entire things to Freya. But now, I am practicing with it. So, I want to install Freya alsongside Windows 7. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;How can I install Freya? &#xA;Whether I need any unused partition to use it on Freya. or it will use the Windows 7 partitions.&lt;/li&gt;&#xA;&lt;li&gt;Will it slow down if I install both OS together ?&lt;/li&gt;&#xA;&lt;li&gt;Both should not Conflict with Partitions. In future I will any one OS. Can I do it without crash problems?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I am newbie to Freya. So my question may not meet the forum standards. so please don't vote it down.  &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-11-23T06:36:05.873" Title="Can I install Freya alongside of Windows 7?" Tags="|release-freya|microsoft-windows|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3140" PostTypeId="2" ParentId="3139" CreationDate="2015-11-23T05:36:16.927" Score="5" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;How can I install Freya? Whether I need any unused partition to use it on Freya. or it will use the Windows 7 partitions.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Backup Data&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Getting Prepared&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install windows first. (Since you already have Windows installed, that’s fine.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Make Room for  elementary&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a seperate partition for elementary. This will save you some time later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TFRk4.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt;: Install elementary:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows&quot; rel=&quot;nofollow noreferrer&quot;&gt;Create a bootable usb&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After completely shutdown your system. Now connect your live usb, start your computer and change BIOS boot order. (Press &lt;kbd&gt;Delete&lt;/kbd&gt; while booting, the key may be different for you)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now select &quot;Try elementary&quot; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now start installing elementary, Go through the installer until you reach an option that asks where (or how) you want to install the elementary. (This is the main step, be careful, simple mistake will wipe windows)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Case 1&lt;/em&gt;: If you have &quot;Install elementary along side windows&quot; option, then proceed with that option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Case 2&lt;/em&gt; : If you &lt;strong&gt;don't&lt;/strong&gt; have the above option, select &quot;something else&quot; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2476/install-elementary-os-in-dual-boot-with-something-else-option&quot;&gt;Install elementary OS in dual boot with 'something else' option&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Will it slow down if I install both OS together ?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Probably not. It mainy depends on your RAM and your work. Create &lt;code&gt;swap&lt;/code&gt; partition. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Both should not Conflict with Partitions. In future I will any one OS. Can I do it without crash problems?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Create other partitions in ntfs format so that it can be recogniged by both elementary and freya. Also install elementary in &lt;strong&gt;extended partition&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-23T05:36:16.927" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3142" PostTypeId="1" AcceptedAnswerId="3250" CreationDate="2015-11-23T06:36:13.170" Score="11" ViewCount="3422" Body="&lt;p&gt;I have to work on multiple code branches that requires me to launch multiple instances of IntelliJ IDE. But when navigating between these instances I find it very difficult to switch to specific instance. I currently do via global windows spread which is very difficult when you have many applications opened. For example in a dock like Cairo when a mouse over a application icon give a concise spread of similar applications (also as in Mac) to switch. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This applies for any application not just IntelliJ, for example when multiple instance of &quot;File manager&quot; is opened and try to navigate to the specific instance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can that be done in plank? If so please let me know how to do that?&lt;/p&gt;&#xA;" OwnerUserId="3191" LastEditorUserId="45" LastEditDate="2016-02-04T00:09:48.220" LastActivityDate="2018-06-07T07:04:26.743" Title="Can I switch between windows of the same app using plank?" Tags="|plank|window-management|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3144" PostTypeId="2" ParentId="3093" CreationDate="2015-11-23T07:36:42.843" Score="2" Body="&lt;p&gt;You cannot change. It is hardcoded in Pantheon Greeter (see &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/pantheon-greeter/trunk/view/head:/src/LoginBox.vala&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-pantheon/pantheon-greeter/trunk/view/head:/src/LoginBox.vala&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-11-23T07:36:42.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3146" PostTypeId="2" ParentId="3124" CreationDate="2015-11-23T07:53:02.293" Score="3" Body="&lt;p&gt;With &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; may be problems, but you can change &lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; in System Settings (Switchboard). This combination does not fail, and works without problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can set some other combinations that are not available from Switchboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;Shift_L', '&amp;lt;Alt&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Alt_L', '&amp;lt;Shift&amp;gt;Alt_R']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Ctrl&amp;gt;Shift_L', '&amp;lt;Ctrl&amp;gt;&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Control_L', '&amp;lt;Shift&amp;gt;Control_R']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Caps Lock&lt;/kbd&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['Caps_Lock']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-11-23T07:53:02.293" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3148" PostTypeId="1" CreationDate="2015-11-23T09:43:00.667" Score="2" ViewCount="29" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H8YfA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H8YfA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have two Network in system setting, how to remove one&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2015-11-23T09:43:00.667" Title="Double &quot;Network&quot;?" Tags="|networking|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-23T21:27:46.597" ContentLicense="CC BY-SA 3.0" />
  <row Id="3150" PostTypeId="1" CreationDate="2015-11-23T13:39:05.990" Score="5" ViewCount="4084" Body="&lt;p&gt;I've been using Ubuntu for a while and I want to switch to elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that I don't know if I can install Ubuntu applications on elementary.&lt;/p&gt;&#xA;" OwnerUserId="3195" LastEditorUserId="2926" LastEditDate="2015-11-24T01:52:16.470" LastActivityDate="2015-11-24T01:52:16.470" Title="Can I install Ubuntu based applications on Elementary?" Tags="|applications|ubuntu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3153" PostTypeId="1" CreationDate="2015-11-23T17:25:05.580" Score="2" ViewCount="224" Body="&lt;p&gt;I'm using elementary OS on my Retina MacBook Pro 10,1 again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Certain 3rd party apps (including Firefox, and also gedit as root) have rather tiny control buttons (close, minimize, maximize) in the title bar. The font size is OK, but the mouse pointer also changes size while hovering over the title bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gwK8d.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gwK8d.png&quot; alt=&quot;rMBP 10,1 eOS Freya Firefox&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3196" LastEditorUserId="5565" LastEditDate="2016-10-06T21:14:30.053" LastActivityDate="2016-10-06T21:14:30.053" Title="How to fix tiny title bar icons in certain 3rd party apps on hiDPI devices" Tags="|release-freya|macbook|pixel-density|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-24T16:57:47.627" ContentLicense="CC BY-SA 3.0" />
  <row Id="3154" PostTypeId="1" CreationDate="2015-11-23T19:08:19.203" Score="1" ViewCount="202" Body="&lt;p&gt;So I am using the default opensource Radeon driver, and pretty much every desktop environment (unity, mate, xfce, etc.) is being supplied a bad EDID from my Samsung LN52B750 television. Specifically the physical size is being returned as 7.2&quot; (160x90mm), however it should be more like 52&quot; (880x500mm), everything else seems to be in order though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now unlike the aforementioned desktop environments, which seem to scale appropriately, Elementary OS's pantheon is gigantisizing everything to the point where I can't open most windows without having them cutoff by the bottom of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any xorg experts out there, that can help me out? Please note that this only happens when connected via HDMI, via VGA everything seems okay, however VGA is not an option for me, as I need the HDMI for audio too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried dumping the raw EDID from the VGA, and using it for HDMI, but my xorg.0.log shows a line stating it's not going to use the CustomEDID option... so I'm at a bit of a loss.&lt;/p&gt;&#xA;" OwnerUserId="3198" LastEditorUserId="5565" LastEditDate="2016-10-06T21:15:43.590" LastActivityDate="2016-10-06T21:15:43.590" Title="How can I override bad EDID with a xorg.conf?" Tags="|release-freya|display|graphics|window-manager|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3156" PostTypeId="2" ParentId="3150" CreationDate="2015-11-23T20:11:38.687" Score="7" Body="&lt;p&gt;&lt;strong&gt;TL;DR: It depends, but mostly yes.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a the vast majority of software, you'll be fine. Apps like LibreOffice, Firefox, Gimp, Transmission, etc all run on elementary OS. Pretty much anything you can get from Software Center will run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there are some apps that have been built specifically for Ubuntu and will not run. The Intel Graphics Driver Installer will refuse to run on anything that isn't explicitly Ubuntu. Installing Unity Tweak Tool can actually have negative effects on your system (like changing your lock screen) and almost none of the features it provides work with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some apps conflict with elementary OS's default apps. For example Shotwell can't be installed side-by-side with Photos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some apps expect desktop environment features that aren't present in elementary OS. For example, Skype and Dropbox expect a specific API to display their panel icons which isn't present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the developer doesn't say they support elementary OS on their website, ask them. Many developers are happy to make sure their apps behave as expected, but they may be unaware of the demand for them to run on environments they haven't used themselves.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-23T20:11:38.687" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3157" PostTypeId="1" CreationDate="2015-11-23T20:19:54.080" Score="2" ViewCount="32" Body="&lt;p&gt;I want to use the new Pantheon-Files FileChooserDialog module, but it doesn't seem to work when creating my own widget based on Gtk.FileChooserDialog (like seen below). Is there anyway for me to be able to do this?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;namespace App.Dialogs {&#xA;&#xA;    public class FileDialog : Gtk.FileChooserDialog {&#xA;        public FileDialog (string title, Gtk.Window? parent, Gtk.FileChooserAction action) {&#xA;             ...&#xA;             this.show_all ();&#xA;        }&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3199" LastEditorUserId="-1" LastEditDate="2015-11-24T11:26:48.443" LastActivityDate="2015-11-24T11:26:48.443" Title="Can I use Pantheon-Files FileChooserDialog module from custom FileChooserDialog Object?" Tags="|programming|development|vala|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3158" PostTypeId="2" ParentId="2965" CreationDate="2015-11-23T20:25:12.820" Score="1" Body="&lt;p&gt;I gave up on this computer. (Asus A7M266-D, 2800+x2 - It seems to like Lubuntu 15.10 though) It was too old for Elementary OS - I fear. I replaced the bios battery, and other hardware changes, but could never get rid of this &quot;future&quot; error. I am now using Elementary OS on a different computer i built - 64bit based - and it runs great. I think the take away from this is that the dually AMD based boards from 10-15 years ago (AMD chipset) may be problematic. I have a Tyan Tiger MP I may test this on in the future.&lt;/p&gt;&#xA;" OwnerUserId="3093" LastActivityDate="2015-11-23T20:25:12.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3159" PostTypeId="2" ParentId="2992" CreationDate="2015-11-24T04:20:58.550" Score="2" Body="&lt;p&gt;Go to &lt;a href=&quot;http://localhost:631&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631&lt;/a&gt; (web-based-printer-setting), select &lt;strong&gt;Administration&lt;/strong&gt; and then checklist &lt;em&gt;Server Settings&lt;/em&gt; as follows ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wbhmx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wbhmx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastActivityDate="2015-11-24T04:20:58.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3161" PostTypeId="1" AcceptedAnswerId="3162" CreationDate="2015-11-24T13:08:01.697" Score="2" ViewCount="179" Body="&lt;p&gt;When I change the volume using my laptop's dedicated volume-control buttons, a pretty notification is displayed on the top right. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have recently started using my laptop with a dock. My external keyboard does not have dedicated volume buttons. I have mapped the scroll-lock/pause-break to &quot;amixer -D pulse sset Master playback 5%-/+&quot;. Doing so does indeed change the volume, but now the volume-change notification does not display. How do I make the notification appear when I change the volume using shortcuts on my external keyboard?&lt;/p&gt;&#xA;" OwnerUserId="2582" LastActivityDate="2015-11-24T13:40:04.187" Title="Notifications for volume changed using terminal" Tags="|keyboard-shortcuts|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3162" PostTypeId="2" ParentId="3161" CreationDate="2015-11-24T13:40:04.187" Score="0" Body="&lt;p&gt;Install the &lt;a href=&quot;https://launchpad.net/ubuntu/+source/xdotool&quot; rel=&quot;nofollow&quot;&gt;xdotool&lt;/a&gt;&#xA;package, and try using the following commands instead:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool key XF86AudioLowerVolume&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool key XF86AudioRaiseVolume&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2015-11-24T13:40:04.187" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3163" PostTypeId="1" CreationDate="2015-11-24T14:28:52.497" Score="4" ViewCount="438" Body="&lt;p&gt;I want to install Elementary OS on a Compaq nx6110. Using a Luna-based ISO, I get an &quot;unable to boot - please use a kernel appropriate for your CPU&quot; message. Apparently Ubuntu ver 12 has a kernel which doesn't require the pae capability. Is there an early version of Elementary based on Ubuntu ver 12?&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3204" LastActivityDate="2016-06-22T05:57:57.023" Title="Is there a version of Elementary based on a kernel that doesn't require a pae-capable CPU?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3165" PostTypeId="1" CreationDate="2015-11-24T14:47:44.757" Score="2" ViewCount="252" Body="&lt;p&gt;I'm getting this error message everytime I start the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: PROMPT_COMMAND: line 1: syntax error near unexpected token `;'&#xA;bash: PROMPT_COMMAND: line 1: `dbus-send --type=method_call --session --dest=net.launchpad.pantheon-terminal /net/launchpad/pantheon_terminal org.pantheon.terminal.ProcessFinished string:$PANTHEON_TERMINAL_ID string:&quot;$(history 1 | cut -c 8-)&quot; &amp;gt;/dev/null 2&amp;gt;&amp;amp;1; ; printf &quot;\033]0;%s@%s:%s\007&quot; &quot;${USER}&quot; &quot;${HOSTNAME%%.*}&quot; &quot;${PWD/#$HOME/\~}&quot;'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3205" LastEditorUserId="3757" LastEditDate="2016-05-07T03:50:13.610" LastActivityDate="2016-05-07T03:50:13.610" Title="Pantheon terminal error message" Tags="|pantheon-terminal|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3166" PostTypeId="1" AcceptedAnswerId="3172" CreationDate="2015-11-24T15:04:18.620" Score="1" ViewCount="286" Body="&lt;p&gt;I would like to be able to scroll horizontally with my mouse wheel and holding something like Alt. I have had to resort to making the scrollbars fat and fugly in the meantime. Running elementary OS 0.3.1 Freya on a desktop, so not trackpad scrolling.&lt;/p&gt;&#xA;" OwnerUserId="3206" LastEditorUserId="34" LastEditDate="2015-11-28T07:22:22.287" LastActivityDate="2015-11-28T07:22:22.287" Title="Horizontal scrolling" Tags="|release-freya|keyboard-shortcuts|mouse|scrollbars|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3168" PostTypeId="2" ParentId="595" CreationDate="2015-11-24T15:14:13.043" Score="3" Body="&lt;p&gt;Short answer:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To reduce the rate of login attempt&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To prevent quick brute forcing of passwords.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This makes it take longer to guess passwords.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Greatly increase security&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Comprehensive:&lt;/p&gt;&#xA;&lt;p&gt;It's actually to prevent brute force attacks from trying millions of passwords per second. The idea is to limit how fast passwords can be checked and there are a number of rules that should be followed.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;A successful user/password pair should succeed immediately.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;There should be no discernible difference in reasons for failure that can be detected.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Not even a time difference in response between the &amp;quot;invalid user and password&amp;quot; and &amp;quot;valid user but invalid password&amp;quot; failure reasons.&lt;/p&gt;&#xA;&lt;p&gt;Every failure should deliver exactly the same information, textual and otherwise.&lt;/p&gt;&#xA;&lt;p&gt;Some systems take it even further, increasing the delay with each failure, or only allowing three failures then having a massive delay before allowing a retry.&lt;/p&gt;&#xA;&lt;p&gt;The general term for this behavior is &lt;a href=&quot;https://en.wikipedia.org/wiki/Tarpit_%28networking%29&quot; rel=&quot;nofollow noreferrer&quot;&gt;tarpitting&lt;/a&gt;. (wikipedia much concentrated on Networking).&lt;/p&gt;&#xA;&lt;p&gt;From The &lt;a href=&quot;https://web.archive.org/web/20050208163546/https://www.sics.se/%7Epelin/pam/pam_appl-2.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux-PAM Application Developer's Guide&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Planning for delays&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;extern int pam_fail_delay(pam_handle_t *pamh, unsigned int micro_sec);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This function is offered by Linux-PAM&#xA;to facilitate time delays following a&#xA;failed call to pam_authenticate() and&#xA;before control is returned to the&#xA;application. When using this function&#xA;the application programmer should&#xA;check if it is available with,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#ifdef PAM_FAIL_DELAY&#xA;    ....&#xA;#endif /* PAM_FAIL_DELAY */&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Generally, an application requests&#xA;that a user is authenticated by&#xA;Linux-PAM through a call to&#xA;pam_authenticate() or pam_chauthtok().&#xA;These functions call each of the&#xA;stacked authentication modules listed&#xA;in the relevant Linux-PAM&#xA;configuration file. As directed by&#xA;this file, one of more of the modules&#xA;may fail causing the pam_...() call to&#xA;return an error. It is desirable for&#xA;there to also be a pause before the&#xA;application continues. The principal&#xA;reason for such a delay is security: a&#xA;delay acts to discourage brute force&#xA;dictionary attacks primarily, but also&#xA;helps hinder timed (covert channel)&#xA;attacks.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Also &lt;a href=&quot;https://devblogs.microsoft.com/oldnewthing/20100323-00/?p=14513&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; article gives more comprehensive information.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;To remove/adjust the delay&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The delay is probably caused by &lt;a href=&quot;https://linux.die.net/man/8/pam_faildelay&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;pam_faildelay.so&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Check your pam configuration in &lt;code&gt;/etc/pam.d/login&lt;/code&gt; using &lt;code&gt;pam_faildelay&lt;/code&gt; e.g:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Enforce a minimal delay in case of failure (in microseconds).&#xA;# (Replaces the `FAIL_DELAY' setting from login.defs)&#xA;# Note that other modules may require another minimal delay. (for example,&#xA;# to disable any delay, you should add the nodelay option to pam_unix)&#xA;auth       optional   pam_faildelay.so  delay=3000000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Another source for the delay may be &lt;a href=&quot;https://linux.die.net/man/8/pam_unix&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;pam_unix.so&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Edit &lt;code&gt;/etc/pam.d/common-auth&lt;/code&gt; and add &lt;em&gt;nodelay&lt;/em&gt;, e.g.,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;auth    [success=1 default=ignore]      pam_unix.so nullok_secure&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Changed to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;auth    [success=1 default=ignore]      pam_unix.so nullok_secure nodelay&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: For CentOS, RHEL and Fedora: you have to look for &lt;code&gt;/etc/pam.d/system-auth&lt;/code&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;References:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://devblogs.microsoft.com/oldnewthing/20100323-00/?p=14513&quot; rel=&quot;nofollow noreferrer&quot;&gt;Why does it take longer to reject an invalid password than to accept a valid one?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/questions/712339/why-should-checking-a-wrong-password-take-longer-than-checking-the-right-one/712368#712368&quot;&gt;Why should checking a wrong password take longer than checking the right one?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://www.linux-pam.org/Linux-PAM-html/Linux-PAM_SAG.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;The Linux-PAM System Administrators' Guide&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/2126/why-is-there-a-big-delay-after-entering-a-wrong-password&quot;&gt;Why is there a big delay after entering a wrong password?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="8517" LastEditDate="2022-09-19T15:52:37.107" LastActivityDate="2022-09-19T15:52:37.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="3169" PostTypeId="1" AcceptedAnswerId="3209" CreationDate="2015-11-24T15:36:25.343" Score="1" ViewCount="43" Body="&lt;p&gt;I have installed the LastPass app and got created a nested desktop, I cannot remove it in any way, please help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0CWG6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0CWG6.jpg&quot; alt=&quot;Desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3207" LastActivityDate="2015-11-26T15:53:27.737" Title="Strange nested desktop, please help!" Tags="|desktop|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3170" PostTypeId="1" CreationDate="2015-11-24T16:26:38.577" Score="5" ViewCount="103" Body="&lt;p&gt;Why is there no option to change what closing the lid does on a laptop? it is really troublesome&lt;/p&gt;&#xA;" OwnerUserId="3209" LastActivityDate="2015-11-24T22:34:26.937" Title="Why is there no option to change what closing the lid does on a laptop?" Tags="|release-freya|power|laptop|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-14T19:56:32.123" ContentLicense="CC BY-SA 3.0" />
  <row Id="3171" PostTypeId="1" AcceptedAnswerId="3173" CreationDate="2015-11-24T16:31:00.347" Score="0" ViewCount="603" Body="&lt;p&gt;I'm using elementary OS for months with no problem (don't installed nothing and uninstall anything, same apps for months). But yesterday I rebooted my computer, typed my password to login and pressed enter, and then got into infinite login loop. I tried with terminal (Ctrl+Alt+F1) and when I login I saw this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;manpath: can't set the locale; make sure $LC_* and $LANG are correct&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tried with sudo apt-get update, and sudo apt-get upgrade but nothing happened.&lt;/p&gt;&#xA;" OwnerUserId="2382" LastEditorUserId="34" LastEditDate="2015-11-27T22:13:31.037" LastActivityDate="2015-11-27T22:13:31.037" Title="Error manpath can't set the locale in my elementary OS Freya" Tags="|release-freya|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3172" PostTypeId="2" ParentId="3166" CreationDate="2015-11-24T16:32:22.907" Score="1" Body="&lt;p&gt;While it used to be possible to scroll horizontally while holding down the Shift key while scrolling, that unfortunately doesn't work anymore.&lt;/p&gt;&#xA;&lt;p&gt;There is a workaround that might do the trick for you using xbindkeys and a small script, though (as originally described &lt;a href=&quot;https://unix.stackexchange.com/a/112351&quot;&gt;here&lt;/a&gt;).This would allow you to toggle back and forth between vertical and horizontal scrolling by pressing &lt;kbd&gt;Control&lt;/kbd&gt; + Right mouse buton.&lt;/p&gt;&#xA;&lt;p&gt;Open a terminal and do the following:&lt;/p&gt;&#xA;&lt;p&gt;1.Install xbindkeys:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;2.Create the toggle script and open it&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt;&amp;gt; ~/.toggle_script.sh  &#xA;scratch-text-editor ~/.toggle_script.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;3.Paste this into the file and save&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;on()&#xA;{&#xA;  xmodmap -e 'pointer = 1 2 3 6 7 4 5 8 9 10'&#xA;}&#xA;&#xA;off()&#xA;{&#xA;  xmodmap -e 'pointer = default'&#xA;}&#xA;&#xA;if xmodmap -pp | grep -q '4.*6'; then&#xA;  off&#xA;else&#xA;  on&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;4.Make it executable&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/.toggle_script.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;5.Create the config file for xbindkeys and execute xbindkeys&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo $'\&amp;quot;~/.toggle_script.sh\&amp;quot;\n\tcontrol+b:3' &amp;gt;.xbindkeysrc&#xA;xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should now be able to toggle back and forth between scrolling modes by pressing&lt;br /&gt;&#xA;&lt;kbd&gt;Control&lt;/kbd&gt; + Right mouse click&lt;/p&gt;&#xA;&lt;p&gt;Please tell me if this works for you :)&lt;/p&gt;&#xA;" OwnerUserId="3196" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-24T16:32:22.907" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3173" PostTypeId="2" ParentId="3171" CreationDate="2015-11-24T17:23:14.150" Score="1" Body="&lt;p&gt;You might try resetting your locales with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  sudo apt-get install --reinstall locales&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, you might try to reinstall them with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install language-pack-en-base&#xA;sudo dpkg-reconfigure locales&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2485" LastActivityDate="2015-11-24T17:23:14.150" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3174" PostTypeId="1" CreationDate="2015-11-24T18:21:37.290" Score="1" ViewCount="335" Body="&lt;p&gt;The mail content in Geary is displayed blurry on my HiDPI display, as are websites in Midori.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some research I think using the latest WebKit version could fix that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2486/how-can-i-compile-midori-with-webkit2/3009#3009&quot;&gt;this&lt;/a&gt; info about how to compile Midori with the latest WebKit version, but &lt;code&gt;libwebkit2gtk-4.0-dev&lt;/code&gt; does not seem to be in the repos and I am not certain about how to adapt the steps described therein for use with Geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help or info would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="3196" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-25T09:15:47.583" Title="Geary blurred on HiDPI screen, possible to compile with latest WebKit version?" Tags="|release-freya|pantheon-mail|hidpi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3176" PostTypeId="2" ParentId="3170" CreationDate="2015-11-24T22:34:26.937" Score="4" Body="&lt;p&gt;Long story short, it's not something that could be done technically in Freya. In the next release, with the migration to SystemD, it will be technically possible to implement the feature again.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-24T22:34:26.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3177" PostTypeId="1" AcceptedAnswerId="3184" CreationDate="2015-11-24T23:20:07.960" Score="1" ViewCount="269" Body="&lt;p&gt;So I try to &lt;code&gt;apt-get update&lt;/code&gt; on the regular when I am working in Terminal. Recently I have been running said command and getting a few errors at the end.  Doesn't seem to effect my box to much of an extent but, how can I go about troubleshooting all of these issues that are being returned? See below: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch cdrom://elementary OS 0.3.1 _Freya_ - Stable amd64 (20150903)/dists/trusty/main/binary-amd64/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;W: Failed to fetch cdrom://elementary OS 0.3.1 _Freya_ - Stable amd64 (20150903)/dists/trusty/restricted/binary-amd64/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;W: Failed to fetch cdrom://elementary OS 0.3.1 _Freya_ - Stable amd64 (20150903)/dists/trusty/main/binary-i386/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;W: Failed to fetch cdrom://elementary OS 0.3.1 _Freya_ - Stable amd64 (20150903)/dists/trusty/restricted/binary-i386/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;W: Failed to fetch htp://ppa.launchpad.net/ronmi/wallbox/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;W: Failed to fetch htp://ppa.launchpad.net/ronmi/wallbox/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;W: Failed to fetch htp://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;W: Failed to fetch htp://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3211" LastEditorUserId="2708" LastEditDate="2015-11-25T01:05:46.303" LastActivityDate="2015-11-25T01:50:05.790" Title="Curious about my apt-get update returns" Tags="|pantheon-terminal|updates|sources|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3178" PostTypeId="1" AcceptedAnswerId="3194" CreationDate="2015-11-24T23:40:42.093" Score="1" ViewCount="51" Body="&lt;p&gt;A picture is worth a thousand words...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6a1CA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6a1CA.png&quot; alt=&quot;missing app icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app icons in the menu bar for &lt;code&gt;wallch&lt;/code&gt; and &lt;code&gt;syntastic&lt;/code&gt; were replaced by the broken-monitor icon after a reboot and I'm not sure why. They were working fine previously.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas how I can fix this? I haven't been able to find where they're defined or any other means to fix them.&lt;/p&gt;&#xA;" OwnerUserId="2971" LastActivityDate="2015-11-25T19:16:34.530" Title="Menu icons broke after reboot" Tags="|icons|menu|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3179" PostTypeId="2" ParentId="3177" CreationDate="2015-11-24T23:43:10.190" Score="0" Body="&lt;p&gt;Check out the first line of each of them. &lt;code&gt;Failed to fetch cdrom://&lt;/code&gt; and &lt;code&gt;Failed to fetch htp://ppa.launchpad.net&lt;/code&gt;. It means that apt is looking for updates at these URLs, but it's not able to get them for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first 4 are looking for a CD and you probably don't have that CD mounted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last 4 are PPAs you've installed and it looks like the URL is misspelled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can manage your software sources by:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;open up the applications menu and search for &quot;Software &amp;amp; Updates&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the &quot;Other&quot; tab&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit, Add, or Remove, or uncheck the offending sources&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-11-25T01:12:39.323" LastActivityDate="2015-11-25T01:12:39.323" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3180" PostTypeId="2" ParentId="3174" CreationDate="2015-11-24T23:44:58.180" Score="1" Body="&lt;p&gt;It's not currently possible to build Geary with WebKit2. You would have to branch the source code and manually port it (not a trivial task and not something it's possible to list steps for).&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-24T23:44:58.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3181" PostTypeId="2" ParentId="3163" CreationDate="2015-11-24T23:46:29.913" Score="1" Body="&lt;p&gt;No, there is not a version of elementary OS that can be installed on a non-PAE CPU.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-24T23:46:29.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3182" PostTypeId="1" CreationDate="2015-11-25T00:22:51.177" Score="2" ViewCount="95" Body="&lt;p&gt;I installed elementary OS on an Acer inspire 5733Z and I have no sound.  Is there a specific driver that I can download to solve the &quot;no sound&quot; problem.  The hardware is Realtek audio chip.  Anything at this stage would be useful to try.&lt;/p&gt;&#xA;" OwnerUserId="3212" LastEditorUserId="68" LastEditDate="2016-01-26T05:40:13.030" LastActivityDate="2016-08-23T08:51:20.950" Title="Problem with audio driver in Acer inspire 5733Z" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3183" PostTypeId="2" ParentId="3182" CreationDate="2015-11-25T00:43:52.693" Score="1" Body="&lt;p&gt;Go-to your terminal and try this. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And than restart your pc again. Still you face the similar problem than try this. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge alsa-base pulseaudio&#xA;&#xA;sudo apt-get install alsa-base pulseaudio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And than &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now restart and check again.  It might be work now. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-11-25T00:43:52.693" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3184" PostTypeId="2" ParentId="3177" CreationDate="2015-11-25T01:32:40.650" Score="3" Body="&lt;p&gt;&lt;strong&gt;Solution for your specific question&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Open &lt;em&gt;Software &amp;amp; Updates&lt;/em&gt;  -- &amp;gt; other software tab:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Uncheck cd rom option.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You have added two unsupported PPA's:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Eronmi/+archive/ubuntu/wallbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa:ronmi/wallbox&lt;/a&gt; and&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Eversable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa:versable/elementary-update&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Removing those two will solve 404 error.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KxP5S.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;More information (for your &lt;em&gt;curiosity&lt;/em&gt; ;))&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Failed to fetch cdrom....&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;The reason for this error is that cdrom has been included as one of the the sources here.&lt;/p&gt;&#xA;&lt;p&gt;And to fix this issue, we need to remove this from the list of software sources.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/HTTP_404&quot; rel=&quot;nofollow noreferrer&quot;&gt;What are 404 errors&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The 404 or Not Found error message is an HTTP standard response code indicating that the client was able to communicate with a given server, but the server could not find what was requested.&lt;/p&gt;&#xA;&lt;p&gt;The web site hosting server will typically generate a &amp;quot;404 Not Found&amp;quot; web page when a user attempts to follow a broken or dead link;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Reasons for these errors&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;A user has enabled a PPA software-source that &lt;strong&gt;no longer exists&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;A user has manually typed in a new software source incorrectly&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;A PPA was added, but &lt;strong&gt;the maintainer has subsequently deleted&lt;/strong&gt; some/all of the PPA (like &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2922/2708&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;To eleminate these errors&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Open software &amp;amp; updates -- &amp;gt; other software tab:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To remove &lt;code&gt;Failed to fetch cdrom://&lt;/code&gt; error mesage: uncheck CD-ROM option.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NPOI9.png&quot; alt=&quot;Imgur&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To remove 404 errors:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;If the error is due to a PPA - usually &lt;strong&gt;unticking&lt;/strong&gt; the similarly named PPA with the URL shown in the error message will resolve this.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If the 404 error was due to an additional repository that has been added to &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; then its easier to add &lt;code&gt;#&lt;/code&gt; character to the start of the line to comment out the offending repository&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-11-25T01:50:05.790" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3185" PostTypeId="1" CreationDate="2015-11-25T04:21:42.927" Score="2" ViewCount="1385" Body="&lt;p&gt;The battery icon on the panel only changes when I restart or log-out then log back in. For example, my battery is low at 15%, however, the icon indicates its at 79%, which was the percentage when I first booted into the OS.&lt;/p&gt;&#xA;" OwnerUserId="2315" LastActivityDate="2016-03-16T18:46:29.910" Title="Battery icon not updating" Tags="|battery|" AnswerCount="3" CommentCount="1" ClosedDate="2016-11-02T15:09:13.453" ContentLicense="CC BY-SA 3.0" />
  <row Id="3186" PostTypeId="1" CreationDate="2015-11-25T06:34:52.737" Score="2" ViewCount="107" Body="&lt;p&gt;A while ago I was messing around with my elementary OS setup and ended up crashing my main admin account.&#xA;I'm not sure exactly what I did but essentially every time I would try to login, I would get stuck in a login loop.  It would halfway log in and then crash and shoot me back to the login screen.&lt;br&gt;&#xA;I stopped using elementary OS for a while because of this and went back to my main OS ubuntuMATE.&lt;br&gt;&#xA;Today I realized well, one: I really like the look and feel of elementary OS and two: that I could just create a  new account through terminal and add it to the sudo group, successfully creating a new admin account.&lt;br&gt;&#xA;It's great I can do everything I need from this account except edit any of the files found in my elementary OS file system as they are all belonging to my main admin account.&lt;br&gt;&#xA;How can I go about transferring ownership of all these files to the new admin account and/or delete the old admin account?&#xA;Would in deleting the former admin account automatically transfer said files?&#xA;How do I solve this?&#xA;Thank you for the help in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ZeDD&lt;/p&gt;&#xA;" OwnerUserId="3211" LastEditorUserId="34" LastEditDate="2015-11-27T13:16:19.437" LastActivityDate="2016-08-24T02:00:20.440" Title="Problem with multiple admin accounts and file ownership" Tags="|greeter|user|" AnswerCount="2" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3187" PostTypeId="2" ParentId="3186" CreationDate="2015-11-25T07:21:26.910" Score="1" Body="&lt;p&gt;Here the goal is to allow &lt;code&gt;new admin&lt;/code&gt; to access files whose permissions and ownership  are under &lt;code&gt;old admin&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In such cases you can do following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;change the file ownership or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chown user:group filename &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add &lt;code&gt;new admin&lt;/code&gt; to group &lt;code&gt;old admin&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-25T07:27:43.947" LastActivityDate="2015-11-25T07:27:43.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3188" PostTypeId="2" ParentId="3174" CreationDate="2015-11-25T08:57:28.117" Score="3" Body="&lt;p&gt;No need to compile anything: you can just update to a newer &lt;code&gt;libwebkitgtk&lt;/code&gt; - then Geary (and other applications like e.g. the WiFi login window) will use that instead of the old one. I think the issue was fixed in &lt;em&gt;2.4.9&lt;/em&gt;, but the version currently available in the repository is &lt;em&gt;2.4.8&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webkit-team/ppa&#xA;sudo sed -i s/trusty/vivid/g /etc/apt/sources.list.d/webkit-team-ppa-trusty.list&#xA;sudo apt-get update&#xA;sudo apt-get install libwebkitgtk-1.0-0 libwebkitgtk-3.0-0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Don't blame me if that breaks things - I destroyed a lot while finding the solution!&lt;/strong&gt;&lt;br&gt;&#xA;&lt;em&gt;Edit:&lt;/em&gt; fixed a lot of wrong things about this :D&lt;/p&gt;&#xA;" OwnerUserId="680" LastEditorUserId="680" LastEditDate="2015-11-25T09:15:47.583" LastActivityDate="2015-11-25T09:15:47.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3189" PostTypeId="1" CreationDate="2015-11-25T13:15:52.037" Score="2" ViewCount="210" Body="&lt;p&gt;I have lenovo y50-70 with 4K display.&#xA;How can I configure OS to have full resolution with optimized scaling? &#xA;And how can I change the size of fonts in TUI and in GRUB menu? It's so tiny I barely can read it! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can't find anything in web, and I'm quite new in linux, please help ;)&lt;/p&gt;&#xA;" OwnerUserId="3216" LastEditorUserId="3757" LastEditDate="2016-05-06T08:53:01.300" LastActivityDate="2016-05-06T08:53:01.300" Title="Resolution problem on Lenovo y50-70 with 4K display" Tags="|lenovo|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3190" PostTypeId="1" AcceptedAnswerId="3197" CreationDate="2015-11-25T14:22:22.677" Score="2" ViewCount="277" Body="&lt;p&gt;I've installed PyChess (&lt;a href=&quot;http://www.pychess.org/download/&quot; rel=&quot;nofollow&quot;&gt;http://www.pychess.org/download/&lt;/a&gt;)&#xA;But when I started I get this message: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;(pychess:17640): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;adwaita&quot;,&#xA;(pychess:17640): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;adwaita&quot;,&#xA;Attempt to unlock mutex that was not locked&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've done &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libcanberra-gtk*&#xA;sudo apt-get install libcanberra-gtk-module:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But still not working.. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updated:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-cache policy pychess&#xA;pychess:&#xA;  Installed: 0.12~beta3-1&#xA;  Candidate: 0.12~beta3-1&#xA;  Version table:&#xA;     *** 0.12~beta3-1 0&#xA;    500 http://py.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;    100 /var/lib/dpkg/status&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1139" LastEditorUserId="1139" LastEditDate="2015-11-26T12:02:11.950" LastActivityDate="2015-11-26T12:02:11.950" Title="Can't start PyChess" Tags="|release-freya|gtk|apps|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3192" PostTypeId="1" AcceptedAnswerId="3193" CreationDate="2015-11-25T18:00:20.863" Score="1" ViewCount="1621" Body="&lt;p&gt;In the Applications menu, I have some programs that are showing up under the &quot;Other&quot; category, that I'd like moved to other categories. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried dragging and dropping, and the only context menu action is &lt;em&gt;Add to Dock&lt;/em&gt;. How do I change the category?&lt;/p&gt;&#xA;" OwnerUserId="2734" LastActivityDate="2015-11-25T18:33:19.143" Title="How do you change the category of an app in the Applications launcher?" Tags="|applications|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3193" PostTypeId="2" ParentId="3192" CreationDate="2015-11-25T18:21:02.040" Score="1" Body="&lt;p&gt;You can acheive this by changing the content of the *.dektop file for the respective application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can usually find these here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just open the respective file and in the &lt;code&gt;[Desktop Entry]&lt;/code&gt; section of the file for example add the the following in order put the entry in the &quot;Office&quot; section:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Categories=Office;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;Network&lt;/code&gt; for the Internet section, etc. Just look at entries for apps in the respective sections in order to find out the correct string for the section you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also install alacarte, this offers you a gui enabling you to edit menu entries. This does not work 100% reliably on elementary in my experience, though. &lt;a href=&quot;http://howtoubuntu.org/how-to-edit-dash-application-results#install-alacarte&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is a short explanation.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="3196" LastEditorUserId="3196" LastEditDate="2015-11-25T18:33:19.143" LastActivityDate="2015-11-25T18:33:19.143" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3194" PostTypeId="2" ParentId="3178" CreationDate="2015-11-25T19:16:34.530" Score="0" Body="&lt;p&gt;I'm not sure of the exact details, but for some reason those applications were removed from the file system even though they were still running in memory. I think it might have had to do with an &lt;code&gt;apt-get autoremove&lt;/code&gt; that went awry but that's just a guess. Reinstalling and restarting the apps fixed the problem. Very strange. Thanks to anyone who investigated this.&lt;/p&gt;&#xA;" OwnerUserId="2971" LastActivityDate="2015-11-25T19:16:34.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3195" PostTypeId="1" CreationDate="2015-11-25T22:05:38.217" Score="1" ViewCount="1020" Body="&lt;p&gt;I just mapped my XF86AudioLowerVolume and XF86AudioRaiseVolume keys using xdotool as discussed in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3161/notifications-for-volume-changed-using-terminal/3162#3162&quot;&gt;this&lt;/a&gt; thread. To raise/lower the volume by twice the amount, I have to press the corresponding key twice. I would like the volume to keep increasing/decreasing while the appropriate key is pressed and to stop changing when it is released. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to do this with just one command rather than a script? Perhaps using a clever xdotool command?&lt;/p&gt;&#xA;" OwnerUserId="2582" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2024-01-12T11:55:56.787" Title="xdotool keypress and key release" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3197" PostTypeId="2" ParentId="3190" CreationDate="2015-11-26T01:59:50.830" Score="1" Body="&lt;p&gt;I have got same error, while trying to solve this post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation from terminal command &lt;code&gt;sudo apt-get install pychess&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;we will get &lt;code&gt;beta3&lt;/code&gt; version, which is very old. (Refer &lt;a href=&quot;https://github.com/pychess/pychess/issues/1055#issuecomment-159736064&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now download &lt;a href=&quot;http://www.pychess.org/download/pychess_0.12-1_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt; 0.12.deb&lt;/a&gt; and install from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: No need to remove installed pychess, you will get &lt;code&gt;upgrade&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/al22m.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mr5ea.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-26T01:59:50.830" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3198" PostTypeId="1" CreationDate="2015-11-26T05:02:07.810" Score="5" ViewCount="313" Body="&lt;p&gt;So I'm thinking about installing elementary on my ASUS X205TA netbook. It has several features that make it very difficult to get a working Linux installation going. Because of the lack of hardware support, getting &lt;em&gt;everything&lt;/em&gt; working is probably impossible right now. However, people have had limited success with various flavours and releases of Ubuntu. (I don't have enough reputation to include the links, sorry.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The main challenges:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;eMMC flash storage&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://sturmflut.github.io/linux/ubuntu/2015/02/04/installing-ubuntu-on-baytrail-tablets-version-2/&quot; rel=&quot;nofollow&quot;&gt;this post&lt;/a&gt;, the 3.19 kernel doesn't support it. This is inconvenient, because elementary 0.3.1, while based on 14.04, uses 3.19. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, apparently eMMC is not an issue when running Debian Jessie and &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Asus/X205TA&quot; rel=&quot;nofollow&quot;&gt;kernel version 4.1&lt;/a&gt;, which also fixes some of the X205TA's wifi and battery issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;32-bit UEFI and 64-bit processor&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is annoying, but people have found workarounds involving custom .efi files, GRUB, and bootloaders like ELILO or rEFInd. Having installed Ubuntu on Macs before, I'm used to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My questions:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is it possible to use Freya with kernel version 4 and up? &lt;/li&gt;&#xA;&lt;li&gt;Is simply using the 32-bit version of Freya enough to avoid the mixed-mode EFI problem? Or will just using the newest kernel solve that problem?&lt;/li&gt;&#xA;&lt;li&gt;Or is this impossible, and I should just suck it up and get used to Windows?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3222" LastEditorUserId="3757" LastEditDate="2016-04-26T02:38:25.957" LastActivityDate="2016-08-25T18:38:10.357" Title="Is it possible to install Freya on a laptop with mixed-mode EFI and eMMC flash?" Tags="|system-installation|hardware|microsoft-windows|uefi|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3200" PostTypeId="2" ParentId="3185" CreationDate="2015-11-26T07:02:41.037" Score="0" Body="&lt;p&gt;Seems to be as a driver issue. It seems you are using a laptop, and in that case updates drivers should be available for your laptop from the manufacturer's website. Try installing that&lt;/p&gt;&#xA;" OwnerUserId="3223" LastActivityDate="2015-11-26T07:02:41.037" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3201" PostTypeId="1" CreationDate="2015-11-26T08:44:56.993" Score="1" ViewCount="89" Body="&lt;p&gt;I have just installed the latest version, 0.3.1 Freya 32 bit, but cannot get my usb wireless adaptor to work. It is a U-Link 802.llN adaptor and the supplied drivers are RTL8192EU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;==========================================================================&#xA;Output as requested:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network               &#xA;   description: Ethernet interface&#xA;   product: 82567LM-3 Gigabit Network Connection&#xA;   vendor: Intel Corporation&#xA;   physical id: 19&#xA;   bus info: pci@0000:00:19.0&#xA;   logical name: eth0&#xA;   version: 02&#xA;   serial: 00:23:7d:2f:6b:73&#xA;   size: 1Gbit/s&#xA;   capacity: 1Gbit/s&#xA;   width: 32 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k duplex=full firmware=0.4-3 ip=192.168.178.31 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s&#xA;   resources: irq:30 memory:f0500000-f051ffff memory:f0525000-f0525fff ioport:1100(size=32)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;==========================================================================&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the install file for the driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;# Auto install for 8192cu&#xA;# September, 1 2010 v1.0.0, willisTang&#xA;# &#xA;# Add make_drv to select chip type&#xA;# Novembor, 21 2011 v1.1.0, Jeff Hung&#xA;################################################################################&#xA;&#xA;echo &quot;##################################################&quot;&#xA;echo &quot;Realtek Wi-Fi driver Auto installation script&quot;&#xA;echo &quot;Novembor, 21 2011 v1.1.0&quot;&#xA;echo &quot;##################################################&quot;&#xA;&#xA;################################################################################&#xA;#   Decompress the driver source tal ball&#xA;################################################################################&#xA;cd driver&#xA;Drvfoulder=`ls |grep .tar.gz`&#xA;echo &quot;Decompress the driver source tar ball:&quot;&#xA;echo &quot;  &quot;$Drvfoulder&#xA;tar zxvf $Drvfoulder&#xA;&#xA;Drvfoulder=`ls |grep -iv '.tar.gz'`&#xA;echo &quot;$Drvfoulder&quot;&#xA;cd  $Drvfoulder&#xA;&#xA;################################################################################&#xA;#   If makd_drv exixt, execute it to select chip type&#xA;################################################################################&#xA;if [ -e ./make_drv ]; then&#xA;./make_drv&#xA;fi&#xA;&#xA;################################################################################&#xA;#                       make clean&#xA;################################################################################&#xA;echo &quot;Authentication requested [root] for make clean:&quot;&#xA;if [ &quot;`uname -r |grep fc`&quot; == &quot; &quot; ]; then&#xA;        sudo su -c &quot;make clean&quot;; Error=$?&#xA;else&#xA;        su -c &quot;make clean&quot;; Error=$?&#xA;fi&#xA;&#xA;################################################################################&#xA;#   Compile the driver&#xA;################################################################################&#xA;echo &quot;Authentication requested [root] for make driver:&quot;&#xA;if [ &quot;`uname -r |grep fc`&quot; == &quot; &quot; ]; then&#xA;sudo su -c make; Error=$?&#xA;else    &#xA;su -c make; Error=$?&#xA;fi&#xA;################################################################################&#xA;#   Check whether or not the driver compilation is done&#xA;################################################################################&#xA;module=`ls |grep -i 'ko'`&#xA;echo &quot;##################################################&quot;&#xA;if [ &quot;$Error&quot; != 0 ];then&#xA;echo &quot;Compile make driver error: $Error&quot;&#xA;echo &quot;Please check error Mesg&quot;&#xA;echo &quot;##################################################&quot;&#xA;exit&#xA;else&#xA;echo &quot;Compile make driver ok!!&quot; &#xA;echo &quot;##################################################&quot;&#xA;fi&#xA;&#xA;if [ &quot;`uname -r |grep fc`&quot; == &quot; &quot; ]; then&#xA;echo &quot;Authentication requested [root] for remove driver:&quot;&#xA;sudo su -c &quot;rmmod $module&quot;&#xA;echo &quot;Authentication requested [root] for insert driver:&quot;&#xA;sudo su -c &quot;insmod $module&quot;&#xA;echo &quot;Authentication requested [root] for install driver:&quot;&#xA;sudo su -c &quot;make install&quot;&#xA;else&#xA;echo &quot;Authentication requested [root] for remove driver:&quot;&#xA;su -c &quot;rmmod $module&quot;&#xA;echo &quot;Authentication requested [root] for insert driver:&quot;&#xA;su -c &quot;insmod $module&quot;&#xA;echo &quot;Authentication requested [root] for install driver:&quot;&#xA;su -c &quot;make install&quot;&#xA;fi&#xA;echo &quot;##################################################&quot;&#xA;echo &quot;The Setup Script is completed !&quot;&#xA;echo &quot;##################################################&quot;&#xA;&#xA;=========================================================================&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3224" LastEditorUserId="2708" LastEditDate="2016-01-12T11:11:45.337" LastActivityDate="2016-01-12T11:11:45.337" Title="U-Link 802.IIN Wireless Issue on Freya" Tags="|release-freya|networking|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3203" PostTypeId="1" CreationDate="2015-11-26T09:43:47.297" Score="2" ViewCount="15" Body="&lt;p&gt;There is a HUUGE problem with translations.&#xA;1-st... rus. language not installed completly. After trying to complete installation... all the system get english.&#xA;Even if I remoove the engllish, it's still exist.&lt;/p&gt;&#xA;" OwnerUserId="3226" LastEditorUserId="3226" LastEditDate="2015-11-26T09:46:59.037" LastActivityDate="2015-11-26T09:46:59.037" Title="Russian language not installing" Tags="|language|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-29T01:02:19.253" ContentLicense="CC BY-SA 3.0" />
  <row Id="3204" PostTypeId="1" CreationDate="2015-11-26T09:43:59.223" Score="5" ViewCount="3221" Body="&lt;p&gt;Bumblebee would be better, because I want to use the Nvidia card with specific apps like Blender but not with Gimp. But right now I can't find anything that helps me to install driver+bumblebee from scratch with the latest driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can Nvidia Prime do that? Use it only for specific apps? Which is better right now? I haven't used Linux for a while.&lt;/p&gt;&#xA;" OwnerUserId="3227" LastEditorUserId="8517" LastEditDate="2020-05-10T10:29:07.717" LastActivityDate="2020-05-10T10:29:07.717" Title="bumblebee vs nvidia-prime? What to use that works with latest nvidia driver?" Tags="|nvidia|bumblebee|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="3205" PostTypeId="2" ParentId="2796" CreationDate="2015-11-26T09:49:02.643" Score="2" Body="&lt;p&gt;Switching to the elementary dark theme solved the issue for me, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2744/ui-elements-are-not-displayed&quot;&gt;UI elements are not displayed&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="81" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-11-26T09:49:02.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3206" PostTypeId="1" AcceptedAnswerId="3259" CreationDate="2015-11-26T10:39:13.927" Score="3" ViewCount="488" Body="&lt;p&gt;I have the usual &lt;code&gt;filetype plugin indent on&lt;/code&gt; and &lt;code&gt;syntax on&lt;/code&gt; commands in my &lt;code&gt;.vimrc&lt;/code&gt; and can verify that filetype is correctly recognised. But no syntax highlighting. What can I do? This worked out of the box in Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="3219" LastActivityDate="2016-06-18T20:40:28.323" Title="How can I enable syntax highlighting in vim?" Tags="|pantheon-terminal|development|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3207" PostTypeId="1" AcceptedAnswerId="3208" CreationDate="2015-11-26T12:44:50.617" Score="6" ViewCount="16754" Body="&lt;p&gt;Whenever I start an application, for example, chrome, I am getting the following errors/warnings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;[3218:3218:1126/180808:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[3218:3218:1126/180808:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[3218:3218:1126/180808:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[3218:3218:1126/180808:ERROR:browser_main_loop.cc(223)] GTK theme error:Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;[3218:3218:1126/180808:ERROR:browser_main_loop.cc(223)] GTK theme error: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How to eliminate those errors/warnings?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2020-10-05T10:51:13.650" Title="How to solve Gtk-WARNING about “pixmap”" Tags="|themes|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3208" PostTypeId="2" ParentId="3207" CreationDate="2015-11-26T12:44:50.617" Score="7" Body="&lt;p&gt;The workaround to eliminate the warnings/errors is by installing &lt;code&gt;gtk2-engines-pixbuf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gtk2-engines-pixbuf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are using a 64-bit system, but using 32-bit software producing those warnings you might run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gtk2-engines-pixbuf:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-26T12:44:50.617" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3209" PostTypeId="2" ParentId="3169" CreationDate="2015-11-26T15:07:53.910" Score="1" Body="&lt;p&gt;I solved this problem by  uninstalling &lt;code&gt;nautilus-nemo&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove nemo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1209/2708&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3207" LastEditorUserId="2708" LastEditDate="2015-11-26T15:53:27.737" LastActivityDate="2015-11-26T15:53:27.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3210" PostTypeId="2" ParentId="724" CreationDate="2015-11-26T15:18:39.067" Score="1" Body="&lt;p&gt;I was able to successfully complete the installation by following &lt;a href=&quot;https://github.com/skylerseverns/elementary-os-freya-uefi/blob/master/installing-elementary-os-freya.md&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;this tutorial&lt;/strong&gt;&lt;/a&gt;, I booted first in legacy mode to install then after having completed to install &lt;strong&gt;rEFInd&lt;/strong&gt; (just download it, and execute &lt;code&gt;install-refind.sh&lt;/code&gt;) I have reset the bios to the UEFI mode and rebooted. After this steps you'll see that the &lt;strong&gt;rEFInd&lt;/strong&gt; UEFI menu is loaded instead of the  original Windows one. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="3207" LastActivityDate="2015-11-26T15:18:39.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3211" PostTypeId="1" CreationDate="2015-11-26T17:07:40.777" Score="1" ViewCount="207" Body="&lt;p&gt;I have tried to plug my headset in the combo jack of my laptop to record with Audacity. I had the same problem not only with elementary OS, but also with Ubuntu. I have tried to use alsa-gui-tools , but it didn't work. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="2409" LastEditorUserId="3757" LastEditDate="2016-05-06T01:34:10.957" LastActivityDate="2016-05-06T01:34:10.957" Title="Combo Jack Mic on Asus Laptop F552C" Tags="|audio|asus|" AnswerCount="0" CommentCount="4" ClosedDate="2016-10-05T19:23:47.533" ContentLicense="CC BY-SA 3.0" />
  <row Id="3214" PostTypeId="1" CreationDate="2015-11-26T23:20:24.047" Score="5" ViewCount="801" Body="&lt;p&gt;I just installed elementary OS, but I can't get the Ubuntu display link driver to work with my smart dock (to connect external screens). Once I go through and activate the &lt;code&gt;.run&lt;/code&gt; from their driver, I ended up stuck at the UDEV rule. Fortunately I found someone who had a similar problem and they managed to &lt;a href=&quot;http://displaylink.org/forum/showthread.php?t=64014&quot; rel=&quot;noreferrer&quot;&gt;fix it&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, once I have made the appropriate changes, I have absolutely no idea how to turn this folder that was generated from a &lt;code&gt;.run&lt;/code&gt; that I can execute to get my driver working.&lt;/p&gt;&#xA;" OwnerUserId="3231" LastEditorUserId="3231" LastEditDate="2015-11-28T18:08:33.937" LastActivityDate="2016-12-22T15:21:53.273" Title="Displaylink driver - Turning folder back into .run" Tags="|release-freya|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3215" PostTypeId="1" AcceptedAnswerId="3273" CreationDate="2015-11-27T02:17:07.103" Score="1" ViewCount="647" Body="&lt;p&gt;I love the look of elementary, but have encountered a frustrating problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The trackpad was working when I selected the &lt;strong&gt;&quot;try&quot;&lt;/strong&gt; option from the boot menu, but doesn't work now that I've installed the OS (I don't imagine it matters, but I selected the default &quot;erase disc and install&quot; option).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 1&lt;/strong&gt; OK, the problem is actually much bigger than just the trackpad not working - a whole bunch of hardware has not been detected, see screenshot of my system settings, there is no audio option, no trackpad listed, no bluetooth:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/a1Adr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a1Adr.png&quot; alt=&quot;system settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 2&lt;/strong&gt; Very weird, the trackpad problem remained through numerous reboots. I installed another Linux (Sabyon/Gentoo, not that it should matter), which detected and enabled the trackpad without issue (but had plenty of other problems!) and now, I've rebooted to Elementary, and the trackpad is working!?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Honestly, it's things like this that I end up back on Windows over the last 10 years or so :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 3&lt;/strong&gt; It's very odd, the trackpad sometimes works after reboot, and sometimes not. I cannot determine any pattern to explain why it does or doesn't work at any particular time. The 'soft' buttons are never finctional, nor is there ever a &quot;Mouse/Trackpad&quot; option in the system settings&lt;/p&gt;&#xA;" OwnerUserId="3233" LastEditorUserId="3233" LastEditDate="2015-12-19T13:52:51.777" LastActivityDate="2015-12-31T13:13:36.230" Title="How can I get my hardware working in Elementary?" Tags="|hardware|laptop|touchpad|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3216" PostTypeId="1" AcceptedAnswerId="3217" CreationDate="2015-11-27T02:44:56.483" Score="2" ViewCount="255" Body="&lt;p&gt;I love the design aesthetics of midori (well, the whole OS, really), but I can't bear the thought of being exposed to the gamut of online ads.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any suggestion on ad blocking?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've read in the past about the possibility of ad-blocking in Windows through the &quot;hosts&quot; file, does similar exist for elementary?&lt;/p&gt;&#xA;" OwnerUserId="3233" LastActivityDate="2015-11-27T03:12:18.700" Title="options for blocking ads" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3217" PostTypeId="2" ParentId="3216" CreationDate="2015-11-27T03:12:18.700" Score="2" Body="&lt;p&gt;Go to settings --&gt; preferences --&gt; Extensions&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6kNEF.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/QWe8y.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the configuration icon on right side, select preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xqPVa.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also possible to go those sites and add even more block lists. But these two (EasyPrivacy and EasyList) should be enough to block most of the common ads. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-27T03:12:18.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3218" PostTypeId="1" CreationDate="2015-11-27T04:00:56.397" Score="0" ViewCount="39" Body="&lt;p&gt;I have a new install of elementary, and I notice that searches in software center give results for purchasing magazines and other things which I have 0 interest in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I will NEVER buy magazines through software center, how can I turn off these results?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt; the best solution for me was to install the Synaptic Package Manager&lt;/p&gt;&#xA;" OwnerUserId="3233" LastEditorUserId="3233" LastEditDate="2015-11-27T06:55:30.317" LastActivityDate="2016-08-24T18:21:04.560" Title="magazine purchases in software center" Tags="|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3219" PostTypeId="2" ParentId="3218" CreationDate="2015-11-27T04:58:00.703" Score="1" Body="&lt;p&gt;As far as I know, it is possible to disable only magazines but it requires a lot more hacks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The better choice is to use synaptic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-28T12:50:32.217" LastActivityDate="2015-11-28T12:50:32.217" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3223" PostTypeId="1" CreationDate="2015-11-27T08:33:40.690" Score="2" ViewCount="360" Body="&lt;p&gt;I have a late 2014 mac mini with the latest osx and parallels installed.&#xA;I'm trying to install elementary os in parallels but every time I boot into the live os or install I get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ACPI PCC FAILED&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I play around in live mode/ or install, when I reboot or shutdown it gets stuck on &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount: / is busy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also tried in virtualbox with same issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get it working without these errors?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep in mind I'm new to linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like how it looks and want to give it a try.&lt;/p&gt;&#xA;" OwnerUserId="3236" LastActivityDate="2016-09-17T00:37:05.040" Title="mount: / is busy" Tags="|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3224" PostTypeId="1" CreationDate="2015-11-27T09:32:14.983" Score="1" ViewCount="52" Body="&lt;p&gt;I'm facing an issue when I pull out the HDMI cable from my laptop. All the windows, panel at the top and panel at the bottom will not move to the laptop monitor once I pull out the HDMI cable. I have to restart my whole system in order to be able to work on just my laptop monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any fixes I can apply to prevent this from happening?&lt;/p&gt;&#xA;" OwnerUserId="3237" LastActivityDate="2015-11-27T11:48:58.097" Title="Windows and panel not going to laptop screen when external monitor is pulled out" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-07T17:28:36.633" ContentLicense="CC BY-SA 3.0" />
  <row Id="3225" PostTypeId="1" CreationDate="2015-11-27T09:59:26.927" Score="3" ViewCount="215" Body="&lt;p&gt;The music app doesn't start anymore , everything else is working fine. I tried restarting and updating elementary but didn't help. I am an amateur user I don't tweak my elementary I just use it for entertainment &quot;movies , music , browsing &quot;. so my elementary is almost at default settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/otXnk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/otXnk.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;kerollos@Home:~$ noise&#xA;[_LOG_LEVEL_INFO 18:43:13.578628] Application.vala:155: Music version: 0.3.1 &#xA;[_LOG_LEVEL_INFO 18:43:13.578692] Application.vala:157: Kernel version: 3.16.0-53-generic Failed to register: Timeout was reached&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3238" LastEditorUserId="2708" LastEditDate="2015-11-28T02:34:05.140" LastActivityDate="2015-11-28T02:34:05.140" Title="The music application doesn't open" Tags="|music|" AnswerCount="0" CommentCount="2" ClosedDate="2015-11-29T01:01:33.480" ContentLicense="CC BY-SA 3.0" />
  <row Id="3226" PostTypeId="2" ParentId="3224" CreationDate="2015-11-27T11:48:58.097" Score="1" Body="&lt;p&gt;This sounds a lot like my question on how to reach windows that were &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2074/how-do-i-move-reach-a-window-that-i-left-on-a-second-screen&quot;&gt;left on a second screen&lt;/a&gt;, so maybe the same advice can help you:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Disable the second monitor in the settings, &lt;em&gt;before&lt;/em&gt; pulling the HDMI-plug. This should force all windows to the first (primary) monitor.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;By using SUPER+DOWN you maybe can view all the remaining workspaces and rearrange your windows, in case you forgot to disable the 2nd monitor as described above&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2454" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-11-27T11:48:58.097" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3227" PostTypeId="1" CreationDate="2015-11-27T14:16:33.960" Score="4" ViewCount="8797" Body="&lt;p&gt;I cannot see how to add a new user account in Elementary OS, despite having reviewed the system settings and options.&#xA;Can anyone advise on the required steps please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried using the Guest account, but when logged in as Guest, the computer would not connect to the wifi network, plus I couldn't see how to permanently add Firefox to the Dock (since all changes are reversed, when logging out).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I need to create a new user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="3239" LastActivityDate="2015-11-27T14:47:59.390" Title="How can I add a new user account?" Tags="|user|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3228" PostTypeId="2" ParentId="3227" CreationDate="2015-11-27T14:22:57.217" Score="6" Body="&lt;p&gt;Go to system settings --&gt; &lt;strong&gt;user accounts&lt;/strong&gt; --&gt; &lt;em&gt;unlock&lt;/em&gt; --&gt; Click on &lt;strong&gt;+&lt;/strong&gt; (at left bottom corner). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then add details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/JXIeu.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SFa03.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-27T14:22:57.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3229" PostTypeId="2" ParentId="3227" CreationDate="2015-11-27T14:42:06.550" Score="0" Body="&lt;p&gt;If you want to just add user the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3228/2708&quot;&gt;other&lt;/a&gt; procedure is enough.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to add groups or add users to groups you can install the &lt;code&gt;gnome-system-tools&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software Center or with terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-system-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;strong&gt;users &amp;amp; groups&lt;/strong&gt; (gnome-system-tools)  --&gt; &lt;strong&gt;Add&lt;/strong&gt; --&gt; add details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2ns5c.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/hSQRs.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/bpX4z.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-27T14:47:59.390" LastActivityDate="2015-11-27T14:47:59.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3230" PostTypeId="5" CreationDate="2015-11-27T15:19:10.803" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2015-11-27T15:19:10.803" LastActivityDate="2015-11-27T15:19:10.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3231" PostTypeId="4" CreationDate="2015-11-27T15:19:10.803" Score="0" Body="For questions related to users, user accounts, user permissions or guest accounts." OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-11-29T00:57:09.663" LastActivityDate="2015-11-29T00:57:09.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3232" PostTypeId="1" AcceptedAnswerId="3233" CreationDate="2015-11-27T15:30:13.050" Score="10" ViewCount="4171" Body="&lt;p&gt;I run &lt;code&gt;plank --preferences&lt;/code&gt; and found this slider.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AQH6d.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AQH6d.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is it?&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2019-01-20T10:17:08.520" Title="What is &quot;Pressure Reveal&quot; in dock preferences?" Tags="|settings|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3233" PostTypeId="2" ParentId="3232" CreationDate="2015-11-27T17:30:58.563" Score="15" Body="&lt;p&gt;Pressure reveal is a feature designed to make it harder to accidentally un-hide the dock. Instead of revealing any time the cursor hits the bottom row of pixels on your display, it reveals when you continue to push your cursor &lt;em&gt;past&lt;/em&gt; the bottom row of pixels on your display. In this way, it should still be easy to reveal the dock when you actually intend to do so, but harder to accidentally reveal it when you don't intend to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment, this feature is optional because it doesn't fully cooperate with input devices where you can't push the cursor past the bottom of the display: stuff like drawing tablets.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-27T17:30:58.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3234" PostTypeId="2" ParentId="3215" CreationDate="2015-11-27T18:29:30.640" Score="0" Body="&lt;p&gt;I'd recommend first trying to update your system with the latest elementary OS updates, with any luck, that might fix your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, try going to the HP drivers page for your laptop, seeing what general type of drivers they are (i.e. synaptics for touchpads), then installing that on your system and hopefully your devices will be detected now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Warning, I'm completely new to linux and this may break things - this is all conjecture from my own experience with similar problems&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3231" LastEditorUserId="34" LastEditDate="2015-12-31T13:13:36.230" LastActivityDate="2015-12-31T13:13:36.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3235" PostTypeId="1" CreationDate="2015-11-27T19:34:28.033" Score="2" ViewCount="127" Body="&lt;p&gt;Freya does not give notification when I plug my USB drive. How do I active it?&lt;/p&gt;&#xA;" OwnerUserId="3240" LastActivityDate="2015-11-28T16:48:17.790" Title="Freya does not give notification when I plug my USB drive. How do I active it like on Gnome 3?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3237" PostTypeId="2" ParentId="3071" CreationDate="2015-11-28T06:52:41.360" Score="2" Body="&lt;p&gt;elementary OS does not currently have this feature. There is an &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1065153&quot; rel=&quot;nofollow&quot;&gt;open feature request in Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-28T06:52:41.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3238" PostTypeId="2" ParentId="3057" CreationDate="2015-11-28T07:01:00.913" Score="1" Body="&lt;p&gt;No, this is not possible. The value is hard coded in LibMutter, the programming library behind the window manager in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even while loading, an application should remain responsive to the window manager. The application becoming non-responsive will trigger this dialog. This is by design. The window manager is behaving properly. You should file a bug report against software that becomes non-responsive to prevent this behavior in the future.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-28T07:01:00.913" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3239" PostTypeId="1" CreationDate="2015-11-28T11:56:31.533" Score="2" ViewCount="4635" Body="&lt;p&gt;How can you get java plugin to work in midorι? I have tried to use some web apps that require java and they don't work because it seems that midori can't find the proper java plugin like Firefox does.&#xA;Any help appreciated bercause I would like to use mainly midori, since it is very light and fast.&lt;/p&gt;&#xA;" OwnerUserId="3242" LastActivityDate="2016-06-25T18:10:59.747" Title="Midori and Java plugin" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3240" PostTypeId="2" ParentId="3239" CreationDate="2015-11-28T13:39:25.030" Score="1" Body="&lt;p&gt;I solved it by installing java and enabling java plug-in&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install jdk from &lt;a href=&quot;http://tecadmin.net/install-oracle-java-8-jdk-8-ubuntu-via-ppa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enable plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;em&gt;preferences&lt;/em&gt; --&gt; extensions &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LFaWw.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: You can verify at: &lt;a href=&quot;https://minecraft.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://minecraft.net/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If java plugin not enabled: &lt;a href=&quot;https://i.stack.imgur.com/wbBkf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After enabling : &lt;a href=&quot;https://i.stack.imgur.com/WiTSB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-28T13:39:25.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3241" PostTypeId="1" AcceptedAnswerId="3265" CreationDate="2015-11-28T16:30:01.167" Score="2" ViewCount="571" Body="&lt;p&gt;At the moment I'm unable to update my system or install/uninstall any package. The source of the problem seems to be a broken package (&lt;code&gt;tv-maxe&lt;/code&gt; installed from &lt;em&gt;ppa:venerix/pkg&lt;/em&gt;) with unmet dependencies but all my attempts to get around the problem were to no avail:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;apt-get install -f&lt;/code&gt;&lt;/strong&gt; is ineffective and returns the following: &lt;code&gt;E: Sub-process /usr/bin/dpkg returned an error code (2)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Synaptic&lt;/strong&gt; is of no use as well: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to correct problems, you have held broken packages.&#xA;E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.&#xA;E: Unable to correct dependencies&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Another &lt;strong&gt;error&lt;/strong&gt; I get is: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: error: too-long line or missing newline in `/var/lib/dpkg/arch'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;apt-get update&lt;/code&gt;&lt;/strong&gt; returns:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ign http://dl.google.com stable InRelease&#xA;Ign http://it.archive.ubuntu.com trusty InRelease                              &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://dl.google.com stable InRelease                                      &#xA;Get:1 http://it.archive.ubuntu.com trusty-updates InRelease [64,4 kB]          &#xA;Hit http://dl.google.com stable Release.gpg                                    &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release.gpg                                    &#xA;Hit http://security.ubuntu.com trusty-security InRelease                       &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release                                        &#xA;Get:2 http://it.archive.ubuntu.com trusty-backports InRelease [64,5 kB]        &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release                                        &#xA;Hit http://security.ubuntu.com trusty-security/main Sources                    &#xA;Hit http://dl.google.com stable/main amd64 Packages                            &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://it.archive.ubuntu.com trusty Release.gpg                            &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:3 http://it.archive.ubuntu.com trusty-updates/main Sources [246 kB]&#xA;Hit http://security.ubuntu.com trusty-security/restricted Sources              &#xA;Hit http://dl.google.com stable/main amd64 Packages                            &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/universe Sources                &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Sources              &#xA;Get:4 http://it.archive.ubuntu.com trusty-updates/restricted Sources [5.359 B] &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:5 http://it.archive.ubuntu.com trusty-updates/universe Sources [144 kB]    &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/main amd64 Packages             &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://security.ubuntu.com trusty-security/restricted amd64 Packages       &#xA;Get:6 http://it.archive.ubuntu.com trusty-updates/multiverse Sources [5.162 B] &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:7 http://it.archive.ubuntu.com trusty-updates/main amd64 Packages [656 kB] &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://security.ubuntu.com trusty-security/universe amd64 Packages         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Hit http://security.ubuntu.com trusty-security/multiverse amd64 Packages       &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://security.ubuntu.com trusty-security/main Translation-en             &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Translation-en       &#xA;Ign http://dl.google.com stable/main Translation-en_GB                         &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Ign http://dl.google.com stable/main Translation-en                            &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://dl.google.com stable/main Translation-en_GB                         &#xA;Hit http://security.ubuntu.com trusty-security/restricted Translation-en       &#xA;Ign http://dl.google.com stable/main Translation-en                            &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://security.ubuntu.com trusty-security/universe Translation-en         &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                        &#xA;Get:8 http://it.archive.ubuntu.com trusty-updates/restricted amd64 Packages [15,9 kB]&#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Get:9 http://it.archive.ubuntu.com trusty-updates/universe amd64 Packages [329 kB]&#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                   &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty Release.gpg         &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Get:10 http://it.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [13,0 kB]&#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://it.archive.ubuntu.com trusty-updates/main Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty-updates/multiverse Translation-en &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                   &#xA;Hit http://it.archive.ubuntu.com trusty-updates/restricted Translation-en &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                  &#xA;Hit http://it.archive.ubuntu.com trusty-updates/universe Translation-en&#xA;Get:11 http://it.archive.ubuntu.com trusty-backports/main Sources [8.221 B]&#xA;Get:12 http://it.archive.ubuntu.com trusty-backports/restricted Sources [28 B]&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en            &#xA;Get:13 http://it.archive.ubuntu.com trusty-backports/universe Sources [33,2 kB]&#xA;Get:14 http://it.archive.ubuntu.com trusty-backports/multiverse Sources [1.898 B]&#xA;Get:15 http://it.archive.ubuntu.com trusty-backports/main amd64 Packages [9.402 B]&#xA;Get:16 http://it.archive.ubuntu.com trusty-backports/restricted amd64 Packages [28 B]&#xA;Get:17 http://it.archive.ubuntu.com trusty-backports/universe amd64 Packages [39,6 kB]&#xA;Hit http://ppa.launchpad.net trusty Release                             &#xA;Get:18 http://it.archive.ubuntu.com trusty-backports/multiverse amd64 Packages [1.571 B]&#xA;Hit http://ppa.launchpad.net trusty Release                             &#xA;Hit http://it.archive.ubuntu.com trusty-backports/main Translation-en  &#xA;Hit http://ppa.launchpad.net trusty Release                              &#xA;Hit http://it.archive.ubuntu.com trusty-backports/multiverse Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty-backports/restricted Translation-en&#xA;Hit http://ppa.launchpad.net trusty Release                          &#xA;Hit http://it.archive.ubuntu.com trusty-backports/universe Translation-en&#xA;Hit http://ppa.launchpad.net trusty Release                             &#xA;Hit http://it.archive.ubuntu.com trusty Release                        &#xA;Hit http://ppa.launchpad.net trusty Release      &#xA;Hit http://it.archive.ubuntu.com trusty/main Sources                   &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/restricted Sources&#xA;Hit http://it.archive.ubuntu.com trusty/universe Sources           &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en           &#xA;Hit http://it.archive.ubuntu.com trusty/multiverse Sources        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/main amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/restricted amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/universe amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/multiverse amd64 Packages&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/main Translation-en_GB&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/main Translation-en&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/multiverse Translation-en_GB&#xA;Hit http://it.archive.ubuntu.com trusty/multiverse Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/restricted Translation-en_GB&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/restricted Translation-en&#xA;Hit http://it.archive.ubuntu.com trusty/universe Translation-en_GB&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages&#xA;Hit http://it.archive.ubuntu.com trusty/universe Translation-en&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en&#xA;Fetched 1.637 kB in 6s (264 kB/s)                                              &#xA;Reading package lists... Done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-11-29T13:45:44.910" LastActivityDate="2015-11-29T15:14:31.497" Title="Problems with broken packages and apt-related issues" Tags="|apt|package-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3242" PostTypeId="2" ParentId="3235" CreationDate="2015-11-28T16:48:17.790" Score="1" Body="&lt;p&gt;You can't, because it was never intended to be possible. Due to security concerns, the elementary devs decided that the default behaviour when plugging in an external drive was to keep it unmounted and leave it to the user what to do with it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Questionable as it may be, it is a design choice. What I personally find less justifiable is that the volume does not get mounted even if you drag a file on it, which to me is a bug, &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1362041&quot; rel=&quot;nofollow&quot;&gt;but it has been currently labelled as &quot;wishlist&quot;.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-11-28T16:48:17.790" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3243" PostTypeId="2" ParentId="1991" CreationDate="2015-11-28T20:01:05.137" Score="2" Body="&lt;p&gt;&lt;em&gt;Edit: I found a way to solve this that worked for me, so I'm going to post my new information above my previous post.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;New information:&lt;/strong&gt; After hitting the 141 error my screen stuck and I was unable to proceed forward with installation. None of the menu options worked and the only way I was able to restart the elementary installation was by pressing and holding (may 5-10 seconds) the power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then rEFInd booted back up, I selected the thumb drive again and started the install from scratch using instructions from an It's F.O.S.S. guide by Abhishek Prakash (this is for Luna but worked for Freya too): &lt;a href=&quot;http://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow&quot;&gt;http://itsfoss.com/guide-install-elementary-os-luna/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Previous post:&lt;/strong&gt; I experienced this issue too installing on an old MacBook Air on a USB drive after setting up rEFInd with OS X El Capitan and partitioning the hard drive in half but leaving it blank prior to booting up Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am specifically at the Installation type stage of installation. When I click the various options (Quit, Continue anyway, Try again) there is no response and the window appears stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did you ever figure this out, OP?&lt;/p&gt;&#xA;" OwnerUserId="3246" LastEditorUserId="3246" LastEditDate="2015-11-28T21:44:33.167" LastActivityDate="2015-11-28T21:44:33.167" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3244" PostTypeId="1" CreationDate="2015-11-28T20:04:23.280" Score="2" ViewCount="40" Body="&lt;p&gt;I recently started using elementary OS over Ubuntu, as a newbi32 the interface really appealed. However, in the last few days, I've been unable to login. I've tried amending my root password using a guide, using recovery mode, however it has had no effect. Every time I attempt to log in, the password will be accepted, the screen turns dark and then I'm popped back into the login page, is there anything I can do to change this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance for any help you are able to give.&lt;/p&gt;&#xA;" OwnerUserId="3245" LastEditorUserId="3757" LastEditDate="2016-05-05T14:41:51.500" LastActivityDate="2016-05-05T14:41:51.500" Title="elementary OS won't accept login details" Tags="|greeter|" AnswerCount="0" CommentCount="1" ClosedDate="2015-11-29T01:00:58.303" ContentLicense="CC BY-SA 3.0" />
  <row Id="3246" PostTypeId="2" ParentId="2826" CreationDate="2015-11-29T00:52:20.770" Score="1" Body="&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1355561&quot; rel=&quot;nofollow&quot;&gt;known bug&lt;/a&gt; and the only way around it is likely to fix the bug. This is not necessarily true, but most likely is seeing as it appears to affect all installations with multiple, variant screen resolutions. Seeing as the burden of proof is always on the claimant, and I see no evidence that there would be a solution to this, I am going to close this as a duplicate of a bug report.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-11-29T00:52:20.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3248" PostTypeId="2" ParentId="3215" CreationDate="2015-11-29T01:33:19.350" Score="0" Body="&lt;p&gt;Try updating kernel to 4.1 or above. It fixed my problem with alps touchpad in my Pavilion 14.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here=&gt;&lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.3-wily/&quot; rel=&quot;nofollow&quot;&gt;Ubuntu kernel repository&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should download 3 packages, linux-headers***all.deb, linux-headers***$ARCH.deb, linux-image***$ARCH.deb, $ARCH is i386 for 32 bits systems or amd64 for 64 bits systems. &quot;generic&quot; packages are for standard kernel, &quot;lowlatency&quot; are (obviously)for lowlatency kernel.&#xA;After download install using your favorite method, from terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /download/path&#xA;sudo dpkg -i linux*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2015-11-29T01:33:19.350" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3249" PostTypeId="2" ParentId="3023" CreationDate="2015-11-29T01:44:28.127" Score="2" Body="&lt;p&gt;If you have a running linux system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Plug USB&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo parted /dev/sdX set 1 boot on&#xA;sudo mount /dev/sdX1 /mnt&#xA;sudo 7z x /path-to-iso -o/mnt/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where X is your USB device (usualmente a)&lt;/p&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2015-11-29T01:44:28.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3250" PostTypeId="2" ParentId="3142" CreationDate="2015-11-29T01:49:12.060" Score="11" Body="&lt;p&gt;You can either scroll over the icon in plank, or right-click it for a context menu which includes open windows of the application.&lt;/p&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="26" LastEditDate="2015-11-29T14:03:55.873" LastActivityDate="2015-11-29T14:03:55.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3251" PostTypeId="1" AcceptedAnswerId="3255" CreationDate="2015-11-29T01:58:38.157" Score="1" ViewCount="827" Body="&lt;p&gt;I am a Windows user.  And recently started using freya for learning.  I need to install and configure putty for the SSH. I am not sure how to download and install it. Is there any command I have to run in terminal?. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2016-09-27T14:06:30.553" Title="How can I install putty on freya?" Tags="|software-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3252" PostTypeId="2" ParentId="2397" CreationDate="2015-11-29T01:59:02.010" Score="0" Body="&lt;p&gt;Remove printer from system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hp-setup -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2015-11-29T01:59:02.010" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3253" PostTypeId="2" ParentId="2243" CreationDate="2015-11-29T02:09:46.927" Score="1" Body="&lt;p&gt;Try this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From windows cmd:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;diskpart&#xA;list disk&#xA;select disk X&#xA;clean&#xA;create partition primary&#xA;select partition 1&#xA;format fs=fat32 quick&#xA;active&#xA;assign&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Using (or like) 7-zip for decompress iso image into USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In bios settings disable secureboot, legacyboot can (should) be disabled. Save preferences. At start, with USB plugged in, press F9, select &quot;EFI file&quot;, select your boot device (USB), go to /EFI/BOOT and select grubx64.efi&lt;/p&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2015-11-29T02:09:46.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3254" PostTypeId="2" ParentId="2221" CreationDate="2015-11-29T02:21:53.490" Score="1" Body="&lt;p&gt;My refind config file is this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;resolution 1366 768&#xA;use_graphics_for linux,grub,windows&#xA;dont_scan_dirs /EFI/ubuntu,boot,/EFI/freebsd&#xA;default_selection &quot;Elementary OS&quot;&#xA;dont_scan_files /EFI/Boot/BOOTX64.EFI&#xA;&#xA;menuentry &quot;Elementary OS&quot; {&#xA;icon /EFI/refind/icons-backup/elementary.png&#xA;loader /EFI/ubuntu/grubx64.efi&#xA;options &quot;acpi_backlight=vendor resume=UUID=82a50ea8-2f1e-4307-b823-7cb3b03c74a1&quot;&#xA;}&#xA;&#xA;menuentry &quot;FreeBSD&quot; {&#xA;    icon /EFI/refind/icons/os_freebsd.png&#xA;    loader /EFI/freebsd/boot1.efi&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And grub config is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#The important option is GRUB_DEFAULT set to saved for last used&#xA;#set to 0 for first entry/latest kernel&#xA;GRUB_DEFAULT=saved&#xA;GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=0&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash iommu=soft&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;quiet splash iommu=soft usbcore.autosuspend=-1&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="3250" LastEditDate="2015-11-29T18:28:49.577" LastActivityDate="2015-11-29T18:28:49.577" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3255" PostTypeId="2" ParentId="3251" CreationDate="2015-11-29T02:27:17.840" Score="3" Body="&lt;p&gt;&lt;strong&gt;Install from Terminal&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install putty&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Now Access the Putty SSH Client&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/klTu8.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/0sx8T.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="26" LastEditDate="2016-09-25T22:56:42.490" LastActivityDate="2016-09-25T22:56:42.490" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3256" PostTypeId="2" ParentId="2243" CreationDate="2015-11-29T06:00:25.647" Score="1" Body="&lt;p&gt;Here is how you solve this error. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Change your BIOS to use Legacy boot method. (Disable (U)EFI secure boot).&lt;/li&gt;&#xA;&lt;li&gt;Open Elementary OS Freya on live USB, install boot-repair and repair your pre existing installation like you did before.&lt;/li&gt;&#xA;&lt;li&gt;Reboot. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now you can boot from legacy to boot into Freya and use UEFI to boot into Windows. If you get lucky, GRUB will detect your Windows installation as well and will show you option to choose your OS.&lt;/p&gt;&#xA;" OwnerUserId="3240" LastActivityDate="2015-11-29T06:00:25.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3257" PostTypeId="2" ParentId="3023" CreationDate="2015-11-29T06:04:06.843" Score="1" Body="&lt;p&gt;Disable (U)EFI on bios and try.&lt;/p&gt;&#xA;" OwnerUserId="3240" LastActivityDate="2015-11-29T06:04:06.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3258" PostTypeId="1" CreationDate="2015-11-29T06:41:38.387" Score="1" ViewCount="45" Body="&lt;p&gt;I want to decrease few vertical pixels from wingpanel on Freya. Is it possible? if so, how? &lt;/p&gt;&#xA;" OwnerUserId="3240" LastActivityDate="2015-11-29T06:41:38.387" Title="Is it possible to decrease the vertical size of wingpanel?" Tags="|wingpanel|" AnswerCount="0" CommentCount="3" ClosedDate="2015-11-30T17:12:15.850" ContentLicense="CC BY-SA 3.0" />
  <row Id="3259" PostTypeId="2" ParentId="3206" CreationDate="2015-11-29T09:49:55.410" Score="1" Body="&lt;p&gt;It turns out I had some stuff in my &lt;code&gt;.vimrc&lt;/code&gt; which did not belong there (copied it from OSX where I use iTerm).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically, this was the problem&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot; Solarized colorscheme&#xA;if !has('gui_running')&#xA;   let g:solarized_termcolors=256&#xA;endif&#xA;set background=dark&#xA;colorscheme solarized&#xA;hi Visual ctermbg=105&#xA;hi MatchParen cterm=bold ctermbg=125 ctermfg=0&#xA;hi Normal ctermfg=253&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I did not investigate which part exactly, but I did not even have the solarized colorscheme installed, so that might be it.&lt;/p&gt;&#xA;" OwnerUserId="3219" LastActivityDate="2015-11-29T09:49:55.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3261" PostTypeId="1" CreationDate="2015-11-29T11:02:09.823" Score="1" ViewCount="96" Body="&lt;p&gt;I dual-boot elementary OS on my MacBook and it annoys me that the two alt keys do different things, but in particular that all characters for which I use the left alt key in OSX now require the right one (e.g. &lt;code&gt;\&lt;/code&gt; or &lt;code&gt;@&lt;/code&gt;) which make for some very taxing finger exercise especially on the command line. So my question is, &lt;strong&gt;can I interchange the roles of the two alt keys?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3219" LastEditorUserId="2708" LastEditDate="2015-12-02T02:08:55.373" LastActivityDate="2015-12-02T02:08:55.373" Title="Is it possible to swap the Alt keys of a MacBook keyboard?" Tags="|keyboard|typing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3262" PostTypeId="1" CreationDate="2015-11-29T11:39:44.133" Score="6" ViewCount="1512" Body="&lt;p&gt;I already have WINE installed, I have installed by write this on terminal &lt;code&gt;sudo apt-get install wine&lt;/code&gt;. I didn't add any PPA, and WINE worked fine.&#xA;But somehow he just disappear from my system. I notice that because I use PlayOnLinux to install some Windows apps, and yesterday when I'm trying to launch one, I've got a message saying that the WINE stoped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And now when I try to install WINE again I've got some dependencies problems...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DMRvL.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DMRvL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/O6Wwq.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O6Wwq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3254" LastEditorUserId="2708" LastEditDate="2015-11-29T12:41:26.050" LastActivityDate="2016-03-06T13:26:26.403" Title="WINE Installation" Tags="|release-freya|wine|playonlinux|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3263" PostTypeId="1" CreationDate="2015-11-29T13:08:46.630" Score="1" ViewCount="169" Body="&lt;p&gt;I'm wondering whether pantheon-files supporting cbr/cbz thumbnails, since I don't see this is in the default settings, use special tweaks maybe? The thing is no comic books format thumbnails support is what makes me not using elementary Freya.&lt;/p&gt;&#xA;" OwnerDisplayName="user1025" LastActivityDate="2015-11-29T13:08:46.630" Title="Is Files supporting cbr thumbnails?" Tags="|release-freya|pantheon-files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3265" PostTypeId="2" ParentId="3241" CreationDate="2015-11-29T15:14:31.497" Score="2" Body="&lt;p&gt;The solution is after discussion in &lt;a href=&quot;https://chat.stackexchange.com/rooms/32269/ravan-and-giulio-sant&quot;&gt;chat&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to &lt;a href=&quot;https://askubuntu.com/users/26246/sneetsher&quot;&gt;@Sneetsher&lt;/a&gt; for his assistance/help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The main error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: error: too-long line or missing newline in `/var/lib/dpkg/arch'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The simple command will do the trick:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo -e -n &quot;amd64\ni386&quot;&amp;gt;/var/lib/dpkg/arch'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-29T15:14:31.497" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3267" PostTypeId="2" ParentId="2141" CreationDate="2015-11-29T18:09:52.753" Score="1" Body="&lt;p&gt;When installer asks you how to install, (Only elementary, etc.), you must select &quot;More&quot;, set partitions, choose the correct partition you want to mount as &lt;code&gt;/boot&lt;/code&gt;, and correct device to install grub.&lt;/p&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="242" LastEditDate="2015-12-09T13:18:10.753" LastActivityDate="2015-12-09T13:18:10.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3268" PostTypeId="2" ParentId="724" CreationDate="2015-11-29T18:14:28.967" Score="0" Body="&lt;p&gt;Does UEFI / BIOS have an option to select EFI file for boot (try F12 ,F11 or look at the PC manual)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, choose &lt;code&gt;/EFI/BOOT/grubx64.efi&lt;/code&gt; from the install media&lt;/p&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="3757" LastEditDate="2016-03-09T19:39:32.130" LastActivityDate="2016-03-09T19:39:32.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3269" PostTypeId="2" ParentId="2946" CreationDate="2015-11-29T18:23:09.283" Score="2" Body="&lt;p&gt;Go to: system settings &gt; sound. in Profile select HDMI output&lt;/p&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2015-11-29T18:23:09.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3270" PostTypeId="2" ParentId="1017" CreationDate="2015-11-29T18:35:04.147" Score="2" Body="&lt;p&gt;Install &lt;code&gt;mtpfs&lt;/code&gt; (If not installed), this will &lt;em&gt;probably&lt;/em&gt; solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mtpfs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="2708" LastEditDate="2015-11-30T01:48:32.620" LastActivityDate="2015-11-30T01:48:32.620" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3271" PostTypeId="1" CreationDate="2015-11-29T19:49:11.517" Score="0" ViewCount="1185" Body="&lt;p&gt;When starting chromium-browser from terminal I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/lib/chromium-browser/chromium-browser: error while loading shared libraries: libffmpeg.so: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried reinstalling ffmpeg which didn't work. How can I fix this ?&lt;/p&gt;&#xA;" OwnerUserId="3257" LastActivityDate="2015-12-30T02:51:58.837" Title="Chromium - libffmpeg problem" Tags="|chromium|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3272" PostTypeId="1" CreationDate="2015-11-29T22:59:15.623" Score="0" ViewCount="286" Body="&lt;p&gt;I'm currently running a dual-boot system with Windows Vista and Ubuntu. I'm just wondering if the 'erase disk' option will effectively erase both operating systems.&lt;/p&gt;&#xA;" OwnerUserId="3258" LastActivityDate="2021-07-02T17:54:03.860" Title="Currently running Ubuntu and Windows dual boot - will installation overwrite both partitions?" Tags="|system-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3273" PostTypeId="2" ParentId="3215" CreationDate="2015-11-29T23:18:13.797" Score="3" Body="&lt;p&gt;Missing panels in Switchboard doesn't really have anything to do with hardware. Most likely, you've installed some third party software, possibly from a third party PPA that conflicts with Switchboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll need to reinstall the missing &lt;code&gt;switchboard-plug-gcc-*&lt;/code&gt; packages from Terminal. For example, for sound:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-gcc-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;kbd&gt;tab&lt;/kbd&gt; to auto-complete in Terminal to discover the names of other plugs to install.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-11-29T23:18:13.797" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3274" PostTypeId="2" ParentId="2237" CreationDate="2015-11-30T00:47:13.703" Score="2" Body="&lt;p&gt;Try using the device path:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;parted -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will show some like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Modelo: ATA HGST HTS545050A7 (scsi)&#xA;Disco /dev/sda: 500GB&#xA;&#xA;Tamaño de sector (lógico/físico): 512B/4096B&#xA;&#xA;Tabla de particiones. gpt&#xA;&#xA;&#xA;Numero  Inicio  Fin    Tamaño  Sistema de archivos  &#xA;Nombre                        Banderas&#xA;&#xA; 1      1049kB  316MB  315MB   ntfs                 Basic data &#xA;partition          oculta, diag&#xA;&#xA; 2      316MB   420MB  105MB   fat32                EFI system &#xA;partition          arranque&#xA;&#xA; 3      420MB   555MB  134MB                        Microsoft reserved &#xA;partition  msftres&#xA;&#xA; 4      555MB   108GB  107GB   ntfs                 Basic data &#xA;partition          msftdata&#xA;&#xA; 9      108GB   407GB  299GB   &#xA;ntfs                                               msftdata&#xA;&#xA; 8      407GB   444GB  37.6GB  ext4&#xA;&#xA; 7      444GB   470GB  25.4GB  ext4&#xA;&#xA;11      470GB   493GB  23.6GB  freebsd-ufs          bsd&#xA;&#xA;10      493GB   495GB  2147MB                       1&#xA;&#xA; 6      495GB   500GB  4295MB  linux-swap(v1)&#xA;&#xA; 5      500GB   500GB  472MB   &#xA;ntfs                                               oculta, diag&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look for the partition you want to mount, 9 in this case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try mounting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -t ntfs-3g -o defaults,rw,uid=1000,users /dev/sda9 /media /mount-point&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it works, replace &lt;code&gt;UUID&lt;/code&gt; in &lt;code&gt;/etc/fstab&lt;/code&gt; (at partition config) with device path like &lt;code&gt;/dev/sdXY&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PostData: Mount point must have been created&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /media/some-dir-name&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="242" LastEditDate="2015-12-09T13:20:20.873" LastActivityDate="2015-12-09T13:20:20.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3275" PostTypeId="2" ParentId="3271" CreationDate="2015-11-30T02:36:25.660" Score="1" Body="&lt;p&gt;From &lt;a href=&quot;https://askubuntu.com/questions/704003/chromium-will-not-start-libffmpeg-problem#comment1033625_704010&quot;&gt;comment by OP&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is solved by the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install chromium-codecs-ffmpeg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-11-30T02:36:25.660" CommentCount="0" CommunityOwnedDate="2015-11-30T02:36:25.660" ContentLicense="CC BY-SA 3.0" />
  <row Id="3276" PostTypeId="2" ParentId="3272" CreationDate="2015-11-30T05:17:49.927" Score="0" Body="&lt;p&gt;&quot;Erase disk&quot; option will delete all the partitions on your harddrive, and create new ones for Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This means that Windows and Ubuntu would be completely removed, as well as any other data files you might have, and Elementary will be the only Operating System on your PC&lt;/p&gt;&#xA;" OwnerUserId="3233" LastActivityDate="2015-11-30T05:17:49.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3277" PostTypeId="1" AcceptedAnswerId="3278" CreationDate="2015-11-30T08:06:36.333" Score="1" ViewCount="4025" Body="&lt;p&gt;I can move the cursor through touchpad.  Which is working fine.  But I can't select it by double click on the touchpad.  Instead of that I can select it by pressing the left click button. Mine Asus x55ca series.  I had no touch pad problem with Windows and ubtuntu.  But working with freya.  Mine touchpad is not ok. I have to press the button whenever I need to select anything. I means it's working partially.  I can able to move the cursor.  But can't select by tapping on it. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-11-30T09:27:18.963" Title="Touchpad is not working on freya works fine in Windows" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3278" PostTypeId="2" ParentId="3277" CreationDate="2015-11-30T09:27:18.963" Score="3" Body="&lt;p&gt;You need to enable the 'Tap to Click' option in &lt;code&gt;Application &amp;gt; System Settings &amp;gt; Mouse &amp;amp; Trackpad&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also enable Two Finger Scroll in the same applet&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't see Mouse &amp;amp; Trackpad, you can install it with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-gcc-mouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3233" LastActivityDate="2015-11-30T09:27:18.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3280" PostTypeId="1" AcceptedAnswerId="3291" CreationDate="2015-11-30T09:35:46.923" Score="4" ViewCount="2458" Body="&lt;p&gt;I've moved from Fedora with gnome-shell 3.16. I'm seeking a plugin that works like &lt;a href=&quot;https://extensions.gnome.org/extension/723/pixel-saver/&quot; rel=&quot;nofollow&quot;&gt;Pixel Saver&lt;/a&gt;, which generally removes the title bar and places its buttons in the top bar.&lt;/p&gt;&#xA;" OwnerUserId="3260" LastEditorUserId="5565" LastEditDate="2016-10-06T02:37:28.050" LastActivityDate="2019-05-15T19:19:06.723" Title="Alternative to Pixel Saver (remove title bar and place buttons in top bar)" Tags="|wingpanel|themes|window-manager|software-recommendation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3281" PostTypeId="2" ParentId="2237" CreationDate="2015-11-30T09:53:47.757" Score="3" Body="&lt;p&gt;if you need it to mount automatically, you can use fstab:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~#vim etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(or any another text editor you'd prefer.)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;generally, fstab holds information about HDDs on your system which will (try to) be mounted on startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;BACK IT UP!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;your NTFS petition probably isn't there, you want to find its UUID with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~# blkid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which will print something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1: LABEL=&quot;System Reserved&quot; UUID=&quot;80D42D64D42D5DA2&quot; TYPE=&quot;ntfs&quot; &#xA;/dev/sda2: UUID=&quot;7A58439F584358D1&quot; TYPE=&quot;ntfs&quot; &#xA;/dev/sda4: LABEL=&quot;storeage&quot; UUID=&quot;82AE2422AE2410E9&quot; TYPE=&quot;ntfs&quot; &#xA;/dev/sda5: UUID=&quot;40eafe67-64b6-4916-a310-0688a6c17675&quot; TYPE=&quot;ext4&quot; &#xA;/dev/sda6: UUID=&quot;e9c1e289-075d-449d-90db-a84a11baaeed&quot; TYPE=&quot;swap&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;i want storeage (ik about the misspell D:) to be mounted on boot, so i add a new line to fstab:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=82AE2422AE2410E9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now you want to specify the &lt;strong&gt;mount point&lt;/strong&gt; for the petition:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/media/storeage&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now we tell the system to use &lt;code&gt;ntfs-3g&lt;/code&gt; which is a recent lib that handles read/write to ntfs petitions, and a whole lot of another stuff related to it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ntfs-3g auto,users,exec,permissions 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;please note the &lt;code&gt;exec&lt;/code&gt; after &lt;code&gt;users&lt;/code&gt;, it tells the system it is permitted to execute anything on the ntfs petition (executable bit always on) and this is a huge security hole, i just need it for my own reasons ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so the whole thing goes like &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=82AE2422AE2410E9 /media/storeage ntfs-3g auto,users,exec,permissions 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=&amp;lt;your_uuid&amp;gt; &amp;lt;mount point&amp;gt; ntfs-3g auto,users,exec,permissions 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;good luck!&lt;/p&gt;&#xA;" OwnerUserId="3260" LastActivityDate="2015-11-30T09:53:47.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3282" PostTypeId="1" CreationDate="2015-11-30T11:38:54.553" Score="3" ViewCount="1516" Body="&lt;p&gt;this is the first time I've ever tried installing Linux (I currently have Windows 10 on this laptop, and would love to get rid of it completely). I'm encountering this error whenever I try to install elementary OS Freya 0.3.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/I1Ihq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I1Ihq.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I &quot;tried&quot; solving it with the answer given &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2517/acpi-pcc-probe-failed-while-trying-to-install-freya&quot;&gt;here&lt;/a&gt; but I have absolutely no clue how to do that (I don't even have the same screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could someone please forgive my ignorance and help me?&lt;/p&gt;&#xA;" OwnerUserId="3262" LastEditorUserId="2708" LastEditDate="2015-11-30T12:26:56.143" LastActivityDate="2016-08-23T00:12:46.003" Title="Can't install Freya, ACPI PCC probe failed" Tags="|kernel|acpi|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3283" PostTypeId="2" ParentId="3282" CreationDate="2015-11-30T12:18:37.403" Score="-1" Body="&lt;p&gt;You just have to wait for few seconds and it will go away. Did you wait after seeing that message? For how long? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;On how to do it with that answer&lt;/strong&gt; - &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you boot on your usb stick and you are presented with this screen: grub chooser, do you get that? &#xA;&lt;a href=&quot;https://i.stack.imgur.com/P48Zd.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/P48Zd.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do, then simply press 'e' key on your laptop/desktop and change the instructed text (which is : nomodeset ) by typing it on your keyboard.&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/oEgAL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oEgAL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You said &quot;(I don't even have the same screen).&quot; But can you choose between Trying out mode and Installation mode? Or do you not get the first image posted at all?&lt;/p&gt;&#xA;" OwnerUserId="3240" LastActivityDate="2015-11-30T12:18:37.403" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3284" PostTypeId="1" CreationDate="2015-11-30T15:15:28.513" Score="1" ViewCount="1198" Body="&lt;p&gt;I am just installing elementary OS Freya 0.3.1 and I'm stuck in progress of installation &quot;detecting file system&quot;: There's no progress, just stuck in there? I appreciate any answer to it.&lt;/p&gt;&#xA;" OwnerUserId="3264" LastEditorUserId="34" LastEditDate="2015-12-03T10:07:25.007" LastActivityDate="2015-12-03T10:07:25.007" Title="Just Stuck in Install &quot;Detecting file systems...&quot;" Tags="|system-installation|filesystem|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3285" PostTypeId="1" CreationDate="2015-11-30T15:33:37.923" Score="3" ViewCount="914" Body="&lt;p&gt;Since a couple of days ago my volume icon has disappeared from Wingpanel. &#xA;I know this issue has surfaced before, but the go-to solution (install &lt;code&gt;indicator-sound&lt;/code&gt;) is of no use (&lt;code&gt;indicator-sound&lt;/code&gt; correctly installed).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an addition, this issue is not user-related, since it affects me even if I log into a guest session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help to troubleshoot this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;As per requested edit:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy indicator-sound&#xA;indicator-sound:&#xA;  Installed: 12.10.2+14.04.20140401-0ubuntu1+elementary4~ubuntu0.3.1&#xA;  Candidate: 12.10.2+14.04.20140401-0ubuntu1+elementary4~ubuntu0.3.1&#xA;  Version table:&#xA; *** 12.10.2+14.04.20140401-0ubuntu1+elementary4~ubuntu0.3.1 0&#xA;        999 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     12.10.2+14.04.20140401-0ubuntu1 0&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update Dec.10:&lt;/strong&gt; Just to let you know that the issue is still there. Despite Ravan's workarounds, the solution appears to work intermittently, meaning that every other reboot or so the volume icon doesn't show up. It's worth noticing that the service is active, though, because I can modify the volume via keyboard shortcuts. My feeling is that there's something wrong in Wingpanel and the way indicators are displayed or not.&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="55" LastEditDate="2015-12-10T15:10:35.567" LastActivityDate="2015-12-10T15:19:17.670" Title="Missing volume icon" Tags="|wingpanel|indicator-sound|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3286" PostTypeId="2" ParentId="3285" CreationDate="2015-11-30T15:44:00.770" Score="3" Body="&lt;p&gt;The following are possible solutions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Reinstall &lt;code&gt;indicator-sound&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall indicator-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;code&gt;dconf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now open dconf:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;com --&gt; canonical --&gt; indicator--&gt; sound --&gt; &lt;strong&gt;visible&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7Jkvj.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If still not working:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also make sure &#xA;the &lt;code&gt;/etc/xdg/autostart/indicator-sound.desktop&lt;/code&gt; file should be exactly like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Indicator Sound&#xA;Exec=/usr/lib/x86_64-linux-gnu/indicator-sound/indicator-sound-service&#xA;OnlyShowIn=Unity;XFCE;GNOME;Pantheon;&#xA;NoDisplay=true&#xA;StartupNotify=false&#xA;Terminal=false&#xA;AutostartCondition=GNOME3 unless-session gnome&#xA;X-Ubuntu-Gettext-Domain=indicator-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: log out and log in &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The problem is temporarily solved (see &lt;a href=&quot;https://chat.stackexchange.com/rooms/32269/ravan-and-giulio-sant&quot;&gt;chat&lt;/a&gt;) after modifying &lt;code&gt;/usr/share/upstart/xdg/autostart/indicator-sound.desktop&lt;/code&gt; and adding &lt;code&gt;Pantheon&lt;/code&gt; to &lt;code&gt;OnlyShowIn&lt;/code&gt;, like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;XFCE;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There will be three auto start options used by indicators&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/xdg/autostart/indicator-sound.desktop&#xA;/usr/share/upstart/xdg/autostart/indicator-sound.desktop&#xA;/usr/share/upstart/sessions/indicator-sound.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;1st is from freedesktop std, should be started by session&lt;br&gt;&#xA;2nd startup app lauched by upstart&lt;br&gt;&#xA;3rd upstart (session mode) deprecated i think and replace by 2nd file&#xA;so in this case 1st is not working&lt;br&gt;&#xA;hard to say as I never traced similar thing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://askubuntu.com/questions/473784/battery-indicator-has-disappeared-from-gnome-panel/482152#482152&quot;&gt;Sneetsher post in AU&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-10T15:19:17.670" LastActivityDate="2015-12-10T15:19:17.670" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3287" PostTypeId="1" AcceptedAnswerId="3312" CreationDate="2015-11-30T18:02:47.787" Score="4" ViewCount="1481" Body="&lt;p&gt;I just installed elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Cannot install playonlinux or wine&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I prefer playonlinux.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo apt-get install playonlinux&#xA;[sudo] password for cipeos: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; playonlinux : Depends: wine or&#xA;                        wine-unstable but it is not installable&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Synaptic wants to remove about the whole of my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the past I was able to fix something similar with the inhanced features of &lt;code&gt;aptitude&lt;/code&gt; - &lt;a href=&quot;https://elementaryos.stackexchange.com/a/352/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now I couldn't, and I am in this position:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo aptitude --full-resolver -f install playonlinux&#xA;[sudo] password for cipeos: &#xA;The following NEW packages will be installed:&#xA;  attr{a} fonts-horai-umefont{a} gcc-4.8-base:i386{a} &#xA;  gcc-4.9-base:i386{a} gnome-exe-thumbnailer{a} icoutils{a} libaio1{a} &#xA;  libasn1-8-heimdal:i386{a} libasound2:i386{a} libasound2-plugins:i386{a} &#xA;  libasyncns0:i386{a} libavahi-client3:i386{a} &#xA;  libavahi-common-data:i386{a} libavahi-common3:i386{a} libc6:i386{a} &#xA;  libcapi20-3{a} libcapi20-3:i386{a} libcgmanager0:i386{a} &#xA;  libcomerr2:i386{a} libcups2:i386{a} libdb5.3:i386{a} &#xA;  libdbus-1-3:i386{a} libdrm-intel1:i386{a} libdrm-nouveau2:i386{a} &#xA;  libdrm-radeon1:i386{a} libdrm2:i386{a} libedit2:i386{a} libelf1:i386{a} &#xA;  libexif12:i386{a} libexpat1:i386{a} libffi6:i386{a} libflac8:i386{a} &#xA;  libfontconfig1:i386{a} libfreetype6:i386{a} libgcc1:i386{a} &#xA;  libgcrypt11:i386{a} libgd3:i386{a} libgif4:i386{a} &#xA;  libgl1-mesa-dri-lts-vivid:i386{a} libgl1-mesa-glx-lts-vivid:i386{a} &#xA;  libglapi-mesa-lts-vivid:i386{a} libglib2.0-0:i386{ab} &#xA;  libglu1-mesa:i386{a} libgnutls26:i386{a} libgpg-error0:i386{a} &#xA;  libgphoto2-6:i386{a} libgphoto2-port10:i386{a} libgpm2:i386{a} &#xA;  libgssapi-krb5-2:i386{a} libgssapi3-heimdal:i386{a} &#xA;  libgstreamer-plugins-base0.10-0:i386{a} libgstreamer0.10-0:i386{a} &#xA;  libhcrypto4-heimdal:i386{a} libhdb9-heimdal{a} &#xA;  libheimbase1-heimdal:i386{a} libheimntlm0-heimdal:i386{a} &#xA;  libhx509-5-heimdal:i386{a} libice6:i386{a} libieee1284-3:i386{a} &#xA;  libjack-jackd2-0:i386{a} libjbig0:i386{a} libjpeg-turbo8:i386{a} &#xA;  libjpeg8:i386{a} libjson-c2:i386{a} libk5crypto3:i386{a} &#xA;  libkdc2-heimdal{a} libkeyutils1:i386{a} libkrb5-26-heimdal:i386{a} &#xA;  libkrb5-3:i386{a} libkrb5support0:i386{a} liblcms2-2:i386{a} &#xA;  libldap-2.4-2:i386{a} libllvm3.6:i386{a} libltdl7:i386{a} &#xA;  liblzma5:i386{a} libmpg123-0:i386{a} libncurses5:i386{a} &#xA;  libnih-dbus1:i386{a} libnih1:i386{a} libnss-winbind{ab} libogg0:i386{a} &#xA;  libopenal1:i386{a} liborc-0.4-0:i386{a} libosmesa6{a} &#xA;  libosmesa6:i386{a} libp11-kit-gnome-keyring:i386{a} libp11-kit0:i386{a} &#xA;  libpam-winbind{ab} libpciaccess0:i386{a} libpcre3:i386{a} &#xA;  libpng12-0:i386{a} libpulse0:i386{a} libroken18-heimdal:i386{a} &#xA;  libsamplerate0:i386{a} libsane:i386{a} libsasl2-2:i386{a} &#xA;  libsasl2-modules:i386{a} libsasl2-modules-db:i386{a} &#xA;  libselinux1:i386{a} libsm6:i386{a} libsndfile1:i386{a} &#xA;  libspeexdsp1:i386{a} libsqlite3-0:i386{a} libssl1.0.0:i386{a} &#xA;  libstdc++6:i386{a} libtasn1-6:i386{a} libtiff5:i386{a} &#xA;  libtinfo5:i386{a} libtxc-dxtn-s2tc0:i386{a} libudev1:i386{a} &#xA;  libusb-1.0-0:i386{a} libuuid1:i386{a} libv4l-0:i386{a} &#xA;  libv4lconvert0:i386{a} libvorbis0a:i386{a} libvorbisenc2:i386{a} &#xA;  libvpx1:i386{a} libwind0-heimdal:i386{a} libwrap0:i386{a} &#xA;  libx11-6:i386{a} libx11-xcb1:i386{a} libxau6:i386{a} &#xA;  libxcb-dri2-0:i386{a} libxcb-dri3-0:i386{a} libxcb-glx0:i386{a} &#xA;  libxcb-present0:i386{a} libxcb-sync1:i386{a} libxcb1:i386{a} &#xA;  libxcomposite1:i386{a} libxcursor1:i386{a} libxdamage1:i386{a} &#xA;  libxdmcp6:i386{a} libxext6:i386{a} libxfixes3:i386{a} libxi6:i386{ab} &#xA;  libxinerama1:i386{a} libxml2:i386{a} libxpm4:i386{a} libxrandr2:i386{a} &#xA;  libxrender1:i386{a} libxshmfence1:i386{a} libxslt1.1:i386{a} &#xA;  libxt6:i386{a} libxxf86vm1:i386{a} ocl-icd-libopencl1:i386{a} &#xA;  p11-kit-modules:i386{a} p7zip{a} playonlinux python-dnspython{a} &#xA;  samba{a} samba-dsdb-modules{a} samba-vfs-modules{a} tdb-tools{a} &#xA;  winbind{a} wine{a} wine-gecko2.21{a} wine-gecko2.21:i386{a} &#xA;  wine-mono0.0.8{a} wine1.6 wine1.6-amd64{a} wine1.6-i386:i386{a} &#xA;  winetricks{a} zlib1g:i386{a} &#xA;0 packages upgraded, 163 newly installed, 0 to remove and 25 not upgraded.&#xA;Need to get 166 MB of archives. After unpacking 573 MB will be used.&#xA;The following packages have unmet dependencies:&#xA; libxi6 : Breaks: libxi6:i386 (!= 2:1.7.4-1~14.04~ricotz1) but 2:1.7.1.901-1ubuntu1.1 is to be installed.&#xA; libxi6:i386 : Breaks: libxi6 (!= 2:1.7.1.901-1ubuntu1.1) but 2:1.7.4-1~14.04~ricotz1 is installed.&#xA; libglib2.0-0 : Breaks: libglib2.0-0:i386 (!= 2.42.2-0ubuntu1~14.04~ricotz0) but 2.40.2-0ubuntu1 is to be installed.&#xA; libglib2.0-0:i386 : Breaks: libglib2.0-0 (!= 2.40.2-0ubuntu1) but 2.42.2-0ubuntu1~14.04~ricotz0 is installed.&#xA; libnss-winbind : Depends: samba-common (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is installed.&#xA;                  Depends: winbind (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is to be installed.&#xA;                  Depends: libwbclient0 (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is installed.&#xA;                  Depends: samba-libs (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is installed.&#xA; libpam-winbind : Depends: samba-common (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is installed.&#xA;                  Depends: winbind (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is to be installed.&#xA;                  Depends: samba-libs (= 2:4.1.6+dfsg-1ubuntu2) but 2:4.1.6+dfsg-1ubuntu2.14.04.9 is installed.&#xA;The following actions will resolve these dependencies:&#xA;&#xA;      Keep the following packages at their current version: &#xA;1)      libglib2.0-0:i386 [Not Installed]                   &#xA;2)      libgstreamer-plugins-base0.10-0:i386 [Not Installed]&#xA;3)      libgstreamer0.10-0:i386 [Not Installed]             &#xA;4)      libnss-winbind [Not Installed]                      &#xA;5)      libpam-winbind [Not Installed]                      &#xA;6)      libxi6:i386 [Not Installed]                         &#xA;7)      playonlinux [Not Installed]                         &#xA;8)      wine [Not Installed]                                &#xA;9)      wine1.6 [Not Installed]                             &#xA;10)     wine1.6-amd64 [Not Installed]                       &#xA;11)     wine1.6-i386:i386 [Not Installed]                   &#xA;&#xA;      Leave the following dependencies unresolved:          &#xA;12)     winetricks recommends wine                          &#xA;13)     winbind recommends libnss-winbind                   &#xA;14)     winbind recommends libpam-winbind                   &#xA;&#xA;&#xA;Accept this solution? [Y/n/q/?] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When trying the available options to replicate the solution of my older answer (see link above) I get to a point where too much of the whole system is bound to be removed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way out?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE after &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3292/170&quot;&gt;answer&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to install playonlinux from the deb using &lt;code&gt;gdebi&lt;/code&gt;, but without &quot;some dependencies&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When starting &lt;code&gt;playonlinux&lt;/code&gt;, Wine, xterm and icoutils were reported absent. Icoutils and Xterm can be installed in terminal, and then in playonlinux I can install specific Wine versions by going to 'Tools - Manage Wine versions':&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lwvr4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lwvr4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Those on the right were manually installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But then I cannot make a certain &lt;code&gt;.exe&lt;/code&gt; file to be installed with one of the Wine versions. When starting an installation the normal way the installation crashes, but a virtual drive is created. When trying to select a specific Wine version for that drive it is not remembered. To make one of the installed Wine versions be remembered by a virtual drive I have to create a drive manually and set a Wine version for it in the first place when asked for one. Selecting the virtual drive in 'Configure', and then, under 'Miscelaneous', the option to 'run a .exe file in this virtual drive', the installation crashes in the first case (when Wine not remembered), and leads to an odd situation in the second case (drive created manually) where Wine is remembered and even the &lt;code&gt;.exe&lt;/code&gt; seems to start running but without any window (I see an icon of the exe program in taskbar/dock). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact, when restarting Playonlinux, it says that Wine is not installed, although inside the program itself I have installed three versions as seen in the image above. But a separate system-wide installation of Wine is needed I think, as it is the case when Playonlinux is installed from Synaptic etc. That separate installation of Wine is not present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stuck again. &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-02-25T19:42:09.280" Title="Cannot install playonlinux (nor Wine)" Tags="|software-installation|wine|playonlinux|aptitude|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3288" PostTypeId="1" CreationDate="2015-11-30T21:22:48.003" Score="2" ViewCount="871" Body="&lt;p&gt;I have a Toshiba NB305 PLL3AC-033014 with an Atom N455 (64 bits capable) and 2GB of DDR3 Ram running Elementary OS (Freya 0.3.1) 64 bits installed on a Samsung 120 GB 850 EVO SSD. The performance is OK. The computer is not super slow, but the overall experience is not really fluid. By that I mean I don't really see any transition or animation because they are too choppy, some programs and web pages take forever to open while other take a couple of seconds, Scrolling up and down is almost always laggy, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is, will I see a &lt;strong&gt;noticeable&lt;/strong&gt; improvement on the overall performance by installing the 32 bits version of Elementary OS, or is the processor on this computer probably just too weak to really provide a fluent experience? Also, if you think the problem can be elsewhere be sure to let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help, Xavier R-T&lt;/p&gt;&#xA;" OwnerUserId="3268" LastActivityDate="2015-12-01T07:49:44.073" Title="Will Elementary OS 32 bits performs better then 64 bits on Intel Atom N455 processor?" Tags="|hardware|performance|intel|64-bit|netboot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3289" PostTypeId="1" CreationDate="2015-12-01T00:48:34.263" Score="1" ViewCount="115" Body="&lt;p&gt;Is it possible to sort files in Pantheon according to when they were last accessed? I used to be able to do it in Nautilus when I was running Ubuntu and even show the access time under the file's title. It's especially handy when keeping track of which series episodes I've watched.&lt;/p&gt;&#xA;" OwnerUserId="3206" LastActivityDate="2016-08-24T17:21:04.223" Title="Pantheon files sort by accessed" Tags="|pantheon-files|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3290" PostTypeId="2" ParentId="3288" CreationDate="2015-12-01T01:17:37.743" Score="2" Body="&lt;p&gt;While it probably won't result in a noticeable difference, a 32 bit install will use &lt;em&gt;slightly&lt;/em&gt; less RAM overall as the OS addresses it differently and you don't need to load both 32 and 64 bit libraries into memory if programs require them. Use the &lt;code&gt;free -m&lt;/code&gt; command to see if you are running out of RAM when these stutters occur.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have a little to spare you could look in your BIOS to see if you can allocate more or less RAM to the integrated graphics card.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-12-01T01:17:37.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3291" PostTypeId="2" ParentId="3280" CreationDate="2015-12-01T02:16:47.483" Score="1" Body="&lt;p&gt;This is not possible for two reasons:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Window decorations are now drawn by the application itself. There no longer is a separate title bar.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The panel does not support such an API.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-01T02:16:47.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3292" PostTypeId="2" ParentId="3287" CreationDate="2015-12-01T07:17:44.133" Score="1" Body="&lt;p&gt;I've got this problem before and, unfortunately, I couldn't solve it without adding a ppa. Please note that you have limited slots to ppas, so use it only when you &lt;strong&gt;really&lt;/strong&gt; need it. If you can avoid it, please do so. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, keep an updated backup of your system, because packages cannot be checked for security loopholes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also strongly advise you to install &lt;a href=&quot;http://www.teejeetech.in/p/timeshift.html&quot; rel=&quot;nofollow&quot;&gt;TimeShift&lt;/a&gt; and do a system snapshot so you can roll back if none of this works (that would also return the status of your slots for ppas/gnu keys).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just to make sure, try to install playonlinux &lt;a href=&quot;https://www.playonlinux.com/script_files/PlayOnLinux/4.2.9/PlayOnLinux_4.2.9.deb&quot; rel=&quot;nofollow&quot;&gt;deb&lt;/a&gt; directly, by issuing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i PlayOnLinux_4.2.9.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that is not enough you can try installing the whole PlayOnLinux ppa, by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -q &quot;http://deb.playonlinux.com/public.gpg&quot; -O- | sudo apt-key add -&#xA;sudo wget http://deb.playonlinux.com/playonlinux_trusty.list -O /etc/apt/sources.list.d/playonlinux.list&#xA;sudo apt-get update&#xA;sudo apt-get install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-12-01T07:17:44.133" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3293" PostTypeId="2" ParentId="3288" CreationDate="2015-12-01T07:49:44.073" Score="1" Body="&lt;p&gt;On &lt;a href=&quot;http://ark.intel.com/products/49491/Intel-Atom-Processor-N455-512K-Cache-1_66-GHz&quot; rel=&quot;nofollow&quot;&gt;ark.intel.com&lt;/a&gt; your processor only capable handle 2GB memory RAM is useless if you use 64bit OS, since pointers can take up twice as much space on a 64-bit operating system. You should go with 32bit version.&lt;/p&gt;&#xA;" OwnerUserId="2984" LastActivityDate="2015-12-01T07:49:44.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3294" PostTypeId="1" AcceptedAnswerId="3295" CreationDate="2015-12-01T10:40:22.930" Score="2" ViewCount="519" Body="&lt;p&gt;Nautilus has the option to see the mime-type of a file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I see that in elementary OS without Nautilus?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="34" LastEditDate="2015-12-02T12:59:32.760" LastActivityDate="2015-12-02T12:59:32.760" Title="How to see the mime type of a file?" Tags="|pantheon-files|files|mimetype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3295" PostTypeId="2" ParentId="3294" CreationDate="2015-12-01T10:41:39.210" Score="2" Body="&lt;p&gt;In Pantheon Files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click on a file, Properties:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9ZeTJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9ZeTJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The above may give a different result than &lt;code&gt;file --mime-type&lt;/code&gt;, so maybe this one is also useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add an option for that in the context menu of the file manager:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing gedit as text editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gedit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Installing Gnome Terminal for the option to hold terminal open:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-terminal &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open gnome-terminal, Edit - Profiles, create new profile called 'hold'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iq7ps.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iq7ps.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit, and under ' Title and command' - When command exists - &lt;strong&gt;&lt;em&gt;Hold the terminal open&lt;/em&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HqS46.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HqS46.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/contractor/show_mimetype.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Paste this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Show mime-type&#xA;Icon=/usr/share/icons/elementary/apps/128/application-default-icon.svg&#xA;MimeType=application/octet-stream;application/binary&#xA;Exec=gnome-terminal --profile hold -e 'file --mime-type -b  %f'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qzEK5.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qzEK5.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2015-12-01T11:19:10.547" LastActivityDate="2015-12-01T11:19:10.547" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3296" PostTypeId="1" CreationDate="2015-12-01T11:46:19.310" Score="1" ViewCount="1108" Body="&lt;p&gt;In a  monitor setup having monitor A as external and monitor B as built-in monitor where monitor A is setup as primary display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I unhook my monitor the dock is correctly place on the built-in monitor. Now when I reconnect the laptop to my external monitor A the dock will not revert back to the primary display. You need to change your primary display to built-in, apply it and then do the same process again for your external monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this so that the dock is always displayed on the primary monitor?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Felix&lt;/p&gt;&#xA;" OwnerUserId="3273" LastEditorUserId="3757" LastEditDate="2016-05-06T01:59:18.593" LastActivityDate="2016-05-06T01:59:18.593" Title="Dock does not switch back to primary display" Tags="|plank|desktop|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3297" PostTypeId="2" ParentId="3296" CreationDate="2015-12-01T14:56:17.860" Score="1" Body="&lt;p&gt;I had a similar problem with using two docks when connected to external display. I wrote a small script that I have to execute each time I (dis-)connect to external display. I don't know any other solution then to restart plank. Just type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall plank&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you did not change any settings in cerbere, plank would instantly restart with default settings (&quot;show on primary&quot;) and should appear on the external display (if this one was automatically set as primary display).&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2015-12-01T14:56:17.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3298" PostTypeId="2" ParentId="3296" CreationDate="2015-12-01T16:12:44.520" Score="1" Body="&lt;p&gt;I believe this is related to this &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1292398&quot; rel=&quot;nofollow&quot;&gt;long-standing bug&lt;/a&gt;, i.e. displays' settings are not preserved from one session to another or after a disconnection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says &quot;Fix released&quot; on elementary's side, but I'm not so sure about this. Can any dev confirm this?&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2015-12-01T16:12:44.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3300" PostTypeId="2" ParentId="3261" CreationDate="2015-12-01T16:42:03.827" Score="1" Body="&lt;p&gt;You can use xmodmap for that. First find out the keycode(s) of the alt keys using &quot;xev&quot;. If not installed, you should install the &lt;code&gt;x11-utils&lt;/code&gt; package. So type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xev | grep keycode&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in terminal, focus to the small window by clicking on it and look to the output in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now press the ALT key(s).  You will see the keycode of the key and its name (e.g. keycode 64 and ALT_L for the left ALT key). Remember the displayed code and name. Let's assume that ALT-L has code 64 and ALT-R code 77. Now type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xmodmap -e &quot;keycode 77 = Alt_L&quot;&#xA;$ xmodmap -e &quot;keycode 64 = ALT_R&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: I don't know the &quot;real name&quot; for right Alt key, so the name in  second command will probably not be correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the behaviour of the keys should be changed. Try it.&#xA;This will only work until next reboot. If you want to make it permanently, you can add the two last commands to your &lt;code&gt;~/.bashrc&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it is not the simplest way, but it should work.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2015-12-01T16:42:03.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3302" PostTypeId="1" AcceptedAnswerId="3303" CreationDate="2015-12-01T19:18:48.087" Score="1" ViewCount="696" Body="&lt;p&gt;On elementary OS I accidentally added the daily ppa and updated the machine on a daily basis. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now i want to remove all the apps that are installed by this ppa. How to do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can i do this automatically or do i have to search for all installed packages and remove/downgrade them one by one?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already removed the PPA from sources.list.d/&lt;/p&gt;&#xA;" OwnerUserId="3088" LastEditorUserId="3757" LastEditDate="2016-05-06T14:20:03.150" LastActivityDate="2016-05-06T14:20:03.150" Title="How to remove installed packages by daily PPA" Tags="|ubuntu|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3303" PostTypeId="2" ParentId="3302" CreationDate="2015-12-01T20:16:33.783" Score="3" Body="&lt;p&gt;You can install a small app called ppa-purge. It will uninstall/downgrade all the apps &amp;amp; libraries installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install ppa-purge,  open a terminal and:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To more info, visit the manpage &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://manpages.ubuntu.com/manpages/trusty/man1/ppa-purge.1.html&quot; rel=&quot;nofollow&quot;&gt;ppa-purge&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-12-01T20:16:33.783" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3306" PostTypeId="1" CreationDate="2015-12-02T03:14:00.610" Score="2" ViewCount="2637" Body="&lt;p&gt;I am currently using Ubuntu. Is it possible to create live CD/DVD of elementary OS instead of creating live usb(flash drive). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If possible, how to create?  &lt;/p&gt;&#xA;" OwnerUserId="3258" LastEditorUserId="34" LastEditDate="2015-12-14T17:28:34.383" LastActivityDate="2015-12-14T17:28:34.383" Title="Is it possible to put elementary OS on a CD/DVD disc instead of a flashdrive?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3307" PostTypeId="2" ParentId="3306" CreationDate="2015-12-02T03:33:36.270" Score="5" Body="&lt;p&gt;The elementary OS &lt;code&gt;.iso&lt;/code&gt; file is too large to fit on a CD, so you will need to either burn it to a DVD or else make an elementary live USB using a flash drive that has at least 2GB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To burn on DVD from Ubuntu: see &lt;a href=&quot;https://help.ubuntu.com/community/BurningIsoHowto&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps copied from the &lt;a href=&quot;http://www.ubuntu.com/download/desktop/burn-a-dvd-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Insert a blank DVD. A 'CD/DVD Creator', 'Choose Disc Type' or 'Blank Disc' window might pop up. Close this, because we will not be using it. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to downloaded ISO file &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Right click on the ISO file and choose 'Write to Disc'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://assets.ubuntu.com/sites/ubuntu/1596/u/img/download/desktop/burn-a-dvd-on-ubuntu/image-burnadvdonubuntu-2.jpg&quot; alt=&quot;image&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Where it says 'Write disc to', you might have options such as 'File image' as well as your CD drive. Choose your CD drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your CD drive might show as something like 'BD-MLT UJ-210S'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;code&gt;disks&lt;/code&gt; to find exact name. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://assets.ubuntu.com/sites/ubuntu/1596/u/img/download/desktop/burn-a-dvd-on-ubuntu/image-burnadvdonubuntu-3.jpg&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Start the burning process.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Reference and source for screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.ubuntu.com/download/desktop/burn-a-dvd-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to burn a DVD on Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more alternatives see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/62518/how-to-burn-or-mount-an-iso-file&quot;&gt;How to burn or mount an ISO file?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-03-10T09:42:42.643" LastActivityDate="2015-12-02T04:05:45.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3308" PostTypeId="1" CreationDate="2015-12-02T03:46:37.377" Score="0" ViewCount="117" Body="&lt;p&gt;I'm attempting to dual boot Windows 10 and Elementary OS. I recently upgraded to Windows 10, however upon attempting to install Elementary along Windows, the only option was to install aside Windows 7. I went back to Windows 10 to create a partition for Elementary to see if that would help at all, to no avail, still saying to install aside Windows 7 (That's the recovery partition.) I'm not sure what to do because I don't want Linux to boot into the Recovery partition instead of Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are pictures to help visualize the problem &lt;a href=&quot;https://sli.mg/a/lhOQna&quot; rel=&quot;nofollow&quot;&gt;https://sli.mg/a/lhOQna&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3282" LastEditorUserId="5565" LastEditDate="2016-10-07T02:28:20.983" LastActivityDate="2016-10-07T11:20:36.973" Title="Elementary does not see Windows 10 but instead sees recovery partition as Windows 7" Tags="|system-installation|dual-boot|disk-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3309" PostTypeId="1" CreationDate="2015-12-02T03:49:23.153" Score="3" ViewCount="222" Body="&lt;p&gt;In gnome3 it would show evolution events in the time/date indicator. How do I get maya to do the same?&lt;/p&gt;&#xA;" OwnerUserId="3283" LastEditorUserId="578" LastEditDate="2016-12-06T22:28:42.493" LastActivityDate="2016-12-06T22:28:42.493" Title="How to make Maya show events in Wingpanel" Tags="|release-freya|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3310" PostTypeId="2" ParentId="3309" CreationDate="2015-12-02T09:12:16.323" Score="4" Body="&lt;p&gt;You can enable a option to show events in the date time indicator with the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime show-events true&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Alternatively&lt;/em&gt;, you can &lt;em&gt;enable&lt;/em&gt; using &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now open &lt;code&gt;dconf-editor&lt;/code&gt; --&gt; com --&gt; canonical --&gt; indicator --&gt; datetime --&gt; &lt;strong&gt;show-events&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/g7MWv.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="2708" LastEditDate="2015-12-02T09:39:46.487" LastActivityDate="2015-12-02T09:39:46.487" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3312" PostTypeId="2" ParentId="3287" CreationDate="2015-12-02T13:26:41.080" Score="1" Body="&lt;p&gt;The main idea is to use &lt;code&gt;aptitude&lt;/code&gt; and its larger options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer follows &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2188107&amp;amp;page=2&quot; rel=&quot;nofollow&quot;&gt;this one on ubuntuforums&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Made &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; support multiarch by adding [arch=amd64,i386] to the deb-line:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deb [arch=amd64,i386] http://fr.archive.ubuntu.com/ubuntu/ trusty universe&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa&#xA;sudo dpkg --add-architecture i386&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update of the database now showed separate amd64 and i386 repos to be loaded. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next I switched to &lt;code&gt;aptitude&lt;/code&gt;, because of the more sophisticated dependency-solver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install aptitude&#xA;&#xA;sudo aptitude --full-resolver -f install wine1.7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Full details: &lt;a href=&quot;http://pastebin.com/Z9Ww11SU&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com/Z9Ww11SU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did in short:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;aptitude suggested a solution where wine1.7 would not be installed, that was selected first (&lt;code&gt;20&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;This solution was rejected with &lt;code&gt;r 20&lt;/code&gt; -- it was a bit complicated for me, I just replicated the commands from the other answer: first selected &lt;code&gt;20&lt;/code&gt; instead of YES or NO; then &lt;code&gt;r 20&lt;/code&gt; (rejecting the removal of Wine 1.7); &lt;/li&gt;&#xA;&lt;li&gt;then &lt;code&gt;n&lt;/code&gt; (It seems that unless you choose &lt;code&gt;Y&lt;/code&gt;, YES, &lt;code&gt;aptitude --full-resolver&lt;/code&gt; gives you new options after each decision; I guess in this case was NO because it said &quot;dependencies unresolved&quot; for Wine); &lt;/li&gt;&#xA;&lt;li&gt;the next step provided the good solution: to install Wine and to downgrade 14 packages: &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ibasn1-8-heimdal libgphoto2-6 libgphoto2-port10 libgssapi3-heimdal libhcrypto4-heimdal libheimbase1-heimdal libheimntlm0-heimdal libhx509-5-heimdal libkrb5-26-heimdal liblcms2-2 libroken18-heimdal libsane libsane-common libwind0-heimdal&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;So, last one was &lt;code&gt;Y&lt;/code&gt; YES, and Wine 1.7 was installed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After that, the installation of &lt;code&gt;playonlinux&lt;/code&gt; went without problems:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;  libwxgtk-media2.8-0{a} mesa-utils{a} playonlinux python-wxgtk2.8{a} python-wxversion{a} &#xA;0 packages upgraded, 5 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-02-23T10:50:17.853" LastActivityDate="2016-02-23T10:50:17.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3313" PostTypeId="1" AcceptedAnswerId="3318" CreationDate="2015-12-02T13:39:03.023" Score="2" ViewCount="366" Body="&lt;p&gt;I'm trying to update Photo (shotwell) from 0.1 to 0.22.0 but don't let me do that... incompatible version of libGphoto.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I appreciate a good update for photos, because is too much unstable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I have two questions&#xA;How to update photos? &#xA;There is an major update from elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!&lt;/p&gt;&#xA;" OwnerUserId="3286" LastEditorUserId="3757" LastEditDate="2016-05-06T14:28:06.217" LastActivityDate="2016-05-20T15:32:46.777" Title="How to update photos in elementary OS Freya?" Tags="|updates|photos|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3314" PostTypeId="1" CreationDate="2015-12-02T13:47:57.590" Score="1" ViewCount="60" Body="&lt;p&gt;Quite often, I'll reboot my machine, i.e., after an update or for some other reason. When the machine reboots, elementary OS won't boot with a desktop, but rather just a command prompt. I can log in via the shell and that sort of thing, but there's no desktop environment. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using 64bit Luna 0.2.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how I can 1) avoid this from happening; or 2) if it does happen, how do I launch the desktop environment from the shell?&lt;/p&gt;&#xA;" OwnerUserId="3287" LastActivityDate="2015-12-02T13:47:57.590" Title="Luna (0.2.1) sometimes won't load desktop environment after a reboot" Tags="|boot|desktop|luna|" AnswerCount="0" CommentCount="0" ClosedDate="2016-08-16T00:26:07.590" ContentLicense="CC BY-SA 3.0" />
  <row Id="3315" PostTypeId="1" CreationDate="2015-12-02T14:57:07.530" Score="1" ViewCount="41" Body="&lt;p&gt;Lenovo Thinkpad T500&#xA;Elementary OS 0.3.1 Freya&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This machine has switchable graphics.  When I use the &quot;discreet&quot;  Mobility Radeon HD 3650 GPU there are no problems with the video, but when I use the &quot;integrated&quot; Intel 4500MHD, the screen will flash or flicker, and momentarily present a sort of &quot;shattered&quot; image when something on the screen transitions through being translucent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The most frequent time this happens is when a notification box appears, but it also happens during log-in as the desktop fades-in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd just leave it in Radeon mode all the time, but it's brutal on battery life, and generates a lot of heat too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm wondering if there is a specific driver I need to load for the Intel graphics vs. the one that was installed by default?&lt;/p&gt;&#xA;" OwnerUserId="3020" LastActivityDate="2015-12-02T14:57:07.530" Title="Screen flashes during &quot;alpha&quot; operations with integrated Intel 4500MHD GPU" Tags="|graphic-drivers|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T16:18:31.720" ContentLicense="CC BY-SA 3.0" />
  <row Id="3316" PostTypeId="2" ParentId="3313" CreationDate="2015-12-02T15:34:17.227" Score="1" Body="&lt;p&gt;Photos is the &quot;The elementary continuation of Shotwell&quot;, so I think it is advisable to stick with it. Besides that, shotwell 0.22 can be installed only on Ubuntu 14.10+ while freya is based on 14.04.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-12-02T15:34:17.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3317" PostTypeId="2" ParentId="2694" CreationDate="2015-12-02T15:42:33.877" Score="1" Body="&lt;p&gt;Place the exec option after the user option, or your drive will still be mounted as noexec, because user option implies noexec, nosuid, and nodev.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2015-12-02T15:42:33.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3318" PostTypeId="2" ParentId="3313" CreationDate="2015-12-02T15:45:28.763" Score="2" Body="&lt;p&gt;It is not advisable to upgrade photos because, it may leads to incompatible issues. The reason is Shotwell 0.1.1 is based on schema 21 where as the version is 0.18 (or other) based on schema 20.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But even you can view/open photos (images) from shotwell&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If still want latest version:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the output of &lt;code&gt;apt-cache policy shotwell&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy shotwell&#xA;shotwell:&#xA;Installed: (none)&#xA;Candidate: 0.18.0-0ubuntu4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The available version is: &lt;strong&gt;0.18&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install with the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install shotwell-common # to satisfy dependency in my case&#xA;sudo apt-get install shotwell&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The available version via ppa: &lt;strong&gt;0.20&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yorba/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install shotwell&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: shotwell &lt;strong&gt;0.22&lt;/strong&gt; is not available for freya at present, see &lt;a href=&quot;https://launchpad.net/~yorba/+archive/ubuntu/ppa?field.series_filter=trusty&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="9" LastEditDate="2016-05-20T15:32:46.777" LastActivityDate="2016-05-20T15:32:46.777" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3320" PostTypeId="1" CreationDate="2015-12-02T17:07:55.153" Score="0" ViewCount="197" Body="&lt;p&gt;I'm trying to install elementary OS on my HP spectre x360 (the qHD version) and only a small part of the window is visible. I'm unable to continue with the installation process because I do not know what it is asking me. I'm completely new to linux and haven't been able to move the window or make it smaller. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated, new to this stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I've worked out what's happening - I believe it thinks my cursor is being used at a different resolution, as the clickable areas do not match where the windows are being displayed, is there a fix for this?&lt;/p&gt;&#xA;" OwnerUserId="3290" LastEditorUserId="3290" LastEditDate="2015-12-02T17:20:00.503" LastActivityDate="2016-01-11T03:24:29.623" Title="Only a quarter of the screen is shown during elementary OS installation" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3321" PostTypeId="1" CreationDate="2015-12-02T17:13:54.500" Score="1" ViewCount="318" Body="&lt;p&gt;I have installed shotwell &lt;em&gt;0.18&lt;/em&gt;. After that when I open shotwell, it shows the message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;Your photo library is not compatible with this version of Shotwell.  It &#xA;  appears it was created by Shotwell 0.1.1 (schema 21).  This version is &#xA;  0.18.0 (schema 20).  Please use the latest version of Shotwell.&quot; &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I also tried installing latest available version 0.20, still problem exists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, I removed &lt;code&gt;~/.cache/shotwell&lt;/code&gt; results the error message disappeared (I am not sure). But when I open shotwell, it freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also how to revert back to 0.1.1 &lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="5565" LastEditDate="2016-10-05T20:49:20.653" LastActivityDate="2016-10-05T20:49:20.653" Title="How to resolve shotwell incompatible error? Shotwell freezes" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3322" PostTypeId="1" AcceptedAnswerId="3323" CreationDate="2015-12-02T17:19:18.447" Score="3" ViewCount="620" Body="&lt;p&gt;I've tried to add a shorcut with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=&quot;org.freedesktop.UPower&quot; /org/freedesktop/UPower org.freedesktop.UPower.Suspend &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in Freya with no result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run that command in terminal I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Error org.freedesktop.UPower.GeneralError: No kernel support&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a special (different from ubuntu) command to suspend Elementary without sudo?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3291" LastEditorUserId="2708" LastEditDate="2015-12-02T17:29:55.697" LastActivityDate="2017-01-26T01:19:25.440" Title="Suspend from shortcut" Tags="|keyboard-shortcuts|command-line|suspend|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3323" PostTypeId="2" ParentId="3322" CreationDate="2015-12-02T17:28:51.220" Score="2" Body="&lt;p&gt;The command working on freya is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=org.freedesktop.login1 /org/freedesktop/login1 &quot;org.freedesktop.login1.Manager.Suspend&quot; boolean:true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;pmi action suspend&lt;/code&gt; not working, so&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To create keyboard shortcut key see &lt;a href=&quot;http://www.absolutelytech.com/2010/10/17/howto-suspend-ubuntu-from-terminal-or-keyboard-shortcuts/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;https://askubuntu.com/a/542944/439451&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-02T17:40:04.580" LastActivityDate="2015-12-02T17:40:04.580" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3324" PostTypeId="1" CreationDate="2015-12-02T18:35:18.183" Score="1" ViewCount="216" Body="&lt;p&gt;I'm on the latest version of elementary OS with dual monitors using the Nvidia binary drivers (340.96). When I try to VNC in over VPN all I get is a black screen with a cursor. I can move around the cursor but that's it. I'll ssh in and reboot the machine, then I can VNC in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally, if I'm VNC'd in, then leave the machine idle for say 10 minutes then try to come back the screen freezes and I need to ssh in and reboot the machine, then I re-VNC in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After searching online for a bit, the only thing I could find that was close was this post: &lt;a href=&quot;https://askubuntu.com/questions/127466/blank-screen-with-vnc-server&quot;&gt;https://askubuntu.com/questions/127466/blank-screen-with-vnc-server&lt;/a&gt; which talks about trying to VNC in and connecting to the wrong monitor. I'm not sure that's what the issue is here, but that's the best lead I have. Nothing in that post's solution applied to my machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help or suggestion is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-09T13:13:23.853" Title="VNC black or frozen screen problems" Tags="|release-freya|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3325" PostTypeId="1" AcceptedAnswerId="3327" CreationDate="2015-12-02T20:14:18.217" Score="2" ViewCount="7361" Body="&lt;p&gt;I'm trying to install Open Office. I downloaded and I followed &lt;a href=&quot;http://www.openoffice.org/download/common/instructions.html#linux-preinstall&quot; rel=&quot;nofollow&quot;&gt;all the steps appearing in their official site&lt;/a&gt; so now it's installed. Now I want to start synapse indicator and when I type 'openoffice' or even 'soffice' I want Open Office to start. I tried to make a desktop file (in /usr/share/applications) to the program directory and it works but it's not recognised by synapse nor the terminal, so how can I make this?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="45" LastEditDate="2015-12-03T00:41:14.160" LastActivityDate="2018-01-26T03:49:53.297" Title="OpenOffice install?" Tags="|applications|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3327" PostTypeId="2" ParentId="3325" CreationDate="2015-12-03T02:32:46.093" Score="4" Body="&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, you have to remove the already installed versions of either openoffice and libreoffice:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge libreoffice* openoffice*&#xA;sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Now Install OpenOffice&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the following commands to install version 4.1.1 (on 64-bit):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget sourceforge.net/projects/openofficeorg.mirror/files/4.1.1/binaries/en-GB/Apache_OpenOffice_4.1.1_Linux_x86-64_install-deb_en-GB.tar.gz&#xA;tar -xzvf Apache_OpenOffice_4.1.1_Linux_x86-64_install-deb_en-GB.tar.gz&#xA;cd en-GB/DEBS&#xA;sudo dpkg -i *.deb&#xA;cd desktop-integration&#xA;sudo dpkg -i *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To Launch&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You can launch from Applications menu:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From terminal with command: &lt;code&gt;soffice&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/clKAf.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can launch from &lt;code&gt;indicator-synapse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/barCt.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;[&lt;em&gt;Alternately&lt;/em&gt; you can Download from its &lt;a href=&quot;https://www.openoffice.org/download/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;official website&lt;/a&gt; and install.The download file will be in *.tar.gz format.]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;sub&gt;Reference &lt;a href=&quot;http://linuxg.net/how-to-install-openoffice-4-1-1-on-ubuntu-14-10-ubuntu-14-04-ubuntu-12-04-debian-8-debian-7-and-derivatives/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-03T06:51:06.837" LastActivityDate="2015-12-03T06:51:06.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3328" PostTypeId="1" CreationDate="2015-12-03T05:02:33.867" Score="0" ViewCount="204" Body="&lt;p&gt;I am  started using Freya  mostly  now I want to know how can I open the task manager like we have in Windows.  And see the running processe and applications.  Also I want to know the cpu  usage and it's ram usages everything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any built in feature for it.?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I need to install anything for it.? &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-12-03T05:06:38.293" Title="How can I see the task manager and know cpu usage?" Tags="|multitasking-view|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-03T05:53:17.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="3329" PostTypeId="2" ParentId="3328" CreationDate="2015-12-03T05:06:38.293" Score="0" Body="&lt;p&gt;For a CLI solution, install htop with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open the terminal with Win+T, and run it with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will be presented with the information you need. Sorry if it is a command line tool, but it is soo well put together that it is worth trying.&lt;/p&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-12-03T05:06:38.293" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3330" PostTypeId="2" ParentId="3204" CreationDate="2015-12-03T05:13:15.407" Score="2" Body="&lt;p&gt;In my experience bumblebee is a fine balance between performance and battery life. It has been reported, however, that installing nvidia-prime will cause better performance on gaming, for example. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia-prime cannot be activated in a per-app basis, so if that is what you need from it you should go with bemblebee.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can arguably install the latest drivers with bumblebee provided you install specific ppa for that. &lt;/p&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-12-03T05:13:15.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3331" PostTypeId="1" AcceptedAnswerId="3332" CreationDate="2015-12-03T06:49:13.987" Score="2" ViewCount="1410" Body="&lt;p&gt;I have installed indicator-synapse using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:noobslab/apps&#xA;sudo apt-get update&#xA;sudo apt-get install indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After reboot, wing panel disappeared. It seems because of &lt;code&gt;indicator-synapse&lt;/code&gt; wingpanel disappeared.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;How to get back wingpanel&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;How to install &lt;code&gt;indicator-synapse&lt;/code&gt; without affecting wingpanel.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-05T11:22:24.587" LastActivityDate="2015-12-05T11:23:50.590" Title="No wingpanel after installing indicator-synapse" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3332" PostTypeId="2" ParentId="3331" CreationDate="2015-12-03T06:49:13.987" Score="2" Body="&lt;p&gt;First remove the installed indicator synapse:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal using shortcut (&lt;kbd&gt;Win&lt;/kbd&gt; + &lt;kbd&gt;t&lt;/kbd&gt;, if you not modified)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now logout/login. Your wing panel will be back&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To install without effecting wingpanel&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found similar bug report (status:invalid) &lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1358490&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the post:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The crash seems related to the fact that indicator-synapse was built using libgee 1.0 instead of libgee 0.8.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The solution&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Manually install &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/unstable-upstream/+sourcepub/4275868/+listing-archive-extra&quot; rel=&quot;nofollow&quot;&gt;indicator-synapse&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download package,  for &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/unstable-upstream/+files/indicator-synapse_0~529-0~ubuntu14.04.1_amd64.deb&quot; rel=&quot;nofollow&quot;&gt;64-bit&lt;/a&gt; and for &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/unstable-upstream/+files/indicator-synapse_0~529-0~ubuntu14.04.1_i386.deb&quot; rel=&quot;nofollow&quot;&gt;32-bit&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install from Software Center.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: Once you update synapse via package manager the problem of course will reappear.(Quoted from the same link)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To eliminate that, hold the &lt;code&gt;indicator-synapse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3121/2708&quot;&gt;how to lock/hold an app&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-05T11:23:50.590" LastActivityDate="2015-12-05T11:23:50.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3333" PostTypeId="1" AcceptedAnswerId="3804" CreationDate="2015-12-03T10:22:58.783" Score="0" ViewCount="165" Body="&lt;p&gt;Recently i installed php5 and mysql server on my freya . How can i open mysql client. I used following command to install it. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mysql-server libapache2-mod-auth-mysql php5-mysql&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help. Is it necessary to install any client separately?&lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2016-01-02T13:17:56.147" Title="How to open mysql client?" Tags="|php|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3334" PostTypeId="1" AcceptedAnswerId="3336" CreationDate="2015-12-03T11:57:34.843" Score="2" ViewCount="450" Body="&lt;p&gt;I cannot seem to find any option to print emails from Geary.&lt;/p&gt;&#xA;" OwnerUserId="3299" LastEditorUserId="45" LastEditDate="2015-12-04T02:41:54.297" LastActivityDate="2015-12-04T02:41:54.297" Title="How to can I print emails in Geary?" Tags="|pantheon-mail|printer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3335" PostTypeId="2" ParentId="3333" CreationDate="2015-12-03T12:00:53.750" Score="1" Body="&lt;p&gt;you have just installed the mysql server for client tools you could use the command line tools which are in &lt;strong&gt;mysql-client&lt;/strong&gt; package and &lt;strong&gt;mysql workbench&lt;/strong&gt; for GUI, you can install both packages like this &lt;strong&gt;sudo apt-get install mysql-client mysql-workbench&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-12-03T12:00:53.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3336" PostTypeId="2" ParentId="3334" CreationDate="2015-12-03T12:10:18.597" Score="3" Body="&lt;p&gt;Open an email, click on downward arrow--&gt; print.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/UhtWI.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-03T12:10:18.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3340" PostTypeId="1" CreationDate="2015-12-03T19:39:16.203" Score="1" ViewCount="1653" Body="&lt;p&gt;I'm having trouble with installing Freya on an iBookG4/PowerBook 6,7 with a PowerPC processor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I restart with the DVD install disk, the boot screen shows only the hard drive.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the disk utility to burn the disk image of the .iso to a DVD.  Press the OPTION button after the chime.  The boot screen appears, with only the hard drive to select.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is Freya/installation compatible with PowerPC processor?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried a Luna download, burned to a CD, with the same result.&lt;/p&gt;&#xA;" OwnerUserId="3303" LastActivityDate="2015-12-05T01:58:39.197" Title="How do I install elementary os with DVD on a iBookG4 Powerbook 6,7 with PowerPC?" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3341" PostTypeId="1" AcceptedAnswerId="3343" CreationDate="2015-12-03T20:12:33.333" Score="4" ViewCount="3074" Body="&lt;p&gt;In other distros like Ubuntu Gnome, when I tap with 3 fingers in my notebook's touchpad, it pastes the clipboard content (same behaviour as middle button in a mause), with elementary I've found that this doesn't happen, and I've looked in the configuration and there's nowhere to enable it...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody knows how to do it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="3304" LastActivityDate="2015-12-03T23:10:54.707" Title="make 3 fingers tap in mousepad equal to middle button mouse click" Tags="|mouse|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3342" PostTypeId="1" CreationDate="2015-12-03T22:08:33.230" Score="1" ViewCount="1391" Body="&lt;p&gt;I have installed elementary OS Freya and I replaced Geary with Mozilla Thunderbird. Is there a way to get notifications in the top panel when a new email arrives like it does by default with Geary?&lt;/p&gt;&#xA;" OwnerUserId="3124" LastEditorUserId="45" LastEditDate="2015-12-04T02:40:07.177" LastActivityDate="2016-05-04T15:28:53.100" Title="How can I get Thunderbird to work with the messaging menu?" Tags="|release-freya|wingpanel|notifications|thunderbird|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3343" PostTypeId="2" ParentId="3341" CreationDate="2015-12-03T22:56:55.407" Score="6" Body="&lt;p&gt;If you use synaptics driver you will probably have the &lt;code&gt;synclient&lt;/code&gt; program installed. In terminal have a look at you current touchpad settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ synclient -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will get a list with many settings. We are interested in the &quot;TapButtonX options&quot;. The X is for the number of fingers, so in your case &quot;Tapbutton3&quot;. I guess it will be disabled: TapButton3 = 0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now type in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ synclient TapButton3=2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If your touchpad supports 3-finger-tap this should work. I cannot test it because my touchpad only supports 2-finger-tap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Possible values:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;TapbuttonX=0: X-finger-tap disabled (can be usefull, if you often touch the pad accidently while typing on keyboard)&lt;/li&gt;&#xA;&lt;li&gt;TapbuttonX=1: X-finger-tap = Left mouse key&lt;/li&gt;&#xA;&lt;li&gt;TapbuttonX=2: X-finger-tap = Middle mouse key&lt;/li&gt;&#xA;&lt;li&gt;TapbuttonX=3: X-finger-tap = Right mouse key&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="107" LastEditorUserId="107" LastEditDate="2015-12-03T23:10:54.707" LastActivityDate="2015-12-03T23:10:54.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3344" PostTypeId="2" ParentId="3340" CreationDate="2015-12-04T01:54:16.500" Score="3" Body="&lt;p&gt;You can't install Elementary OS on a PowerPC Mac. Elementary OS is for Intel architecture only. For PowerPC Macs you can install Ubuntu for PowerPC:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/PowerPCDownloads&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/PowerPCDownloads&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or another distro for PowerPC&lt;/p&gt;&#xA;" OwnerUserId="851" LastEditorUserId="851" LastEditDate="2015-12-05T01:58:39.197" LastActivityDate="2015-12-05T01:58:39.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3345" PostTypeId="1" CreationDate="2015-12-04T02:44:17.570" Score="1" ViewCount="380" Body="&lt;p&gt;I do not understand as to how to do this and the website for Ubuntu with &lt;a href=&quot;https://wiki.ubuntu.com/HardwareSupportComponentsPrintersSamsung&quot; rel=&quot;nofollow&quot;&gt;this information&lt;/a&gt; is not helping me. Could anyone please help me learn how to install this driver? I have already downloaded the drivers from Samsung's website but do not know what to do with the folder now. I have tried running the .sh files and nothing occurs.&lt;/p&gt;&#xA;" OwnerUserId="3312" LastEditorUserId="5565" LastEditDate="2016-10-07T02:27:18.290" LastActivityDate="2016-10-07T02:27:18.290" Title="How to install printer drivers for Samsung Printer SL-M2830DW?" Tags="|drivers|printer|" AnswerCount="0" CommentCount="2" ClosedDate="2015-12-31T13:58:15.110" ContentLicense="CC BY-SA 3.0" />
  <row Id="3346" PostTypeId="2" ParentId="3342" CreationDate="2015-12-04T05:09:53.013" Score="1" Body="&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: The follwing instructions valid when you loginto your mail via thunderbird. Also this is the normal(default) behavior for thunderbird (also for geary). See note 2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Thunderbird.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/e7t0m.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enable the &quot;Messaging Menu ....&quot; and restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Bg7jw.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If you got any message,  the panel icon shows &lt;strong&gt;blue&lt;/strong&gt; dot, like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WMK9f.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note 2&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AFAIK, thunderbird does not have a background service that will fetch mails and show indicator. You have to loginto your mail to get notifications. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-04T15:53:52.937" LastActivityDate="2015-12-04T15:53:52.937" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="3347" PostTypeId="1" AcceptedAnswerId="3348" CreationDate="2015-12-04T06:10:09.087" Score="1" ViewCount="2623" Body="&lt;p&gt;I have installed &lt;code&gt;xdman&lt;/code&gt; using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:noobslab/apps&#xA;sudo apt-get update&#xA;sudo apt-get install xdman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I removed with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge xdman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But name still appear in menu, like&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fm1n9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fm1n9.png&quot; alt=&quot;Xdman Blank Icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="2708" LastEditDate="2015-12-04T10:05:51.450" LastActivityDate="2019-03-18T12:05:59.963" Title="How to remove icon(name) of an uninstalled application in elementary OS?" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3348" PostTypeId="2" ParentId="3347" CreationDate="2015-12-04T06:14:07.240" Score="3" Body="&lt;p&gt;&lt;strong&gt;General solution&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let &lt;code&gt;app_name&lt;/code&gt; is name of the application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep app_name ~/.local/share/applications/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If there is &lt;code&gt;.desktop&lt;/code&gt; file, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.local/share/applications/app_name.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should solve the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Read &lt;a href=&quot;http://linux.die.net/man/1/grep&quot; rel=&quot;nofollow&quot;&gt;man grep&lt;/a&gt; and &lt;a href=&quot;http://linux.about.com/od/commands/l/blcmdl1_rm.htm&quot; rel=&quot;nofollow&quot;&gt;man rm&lt;/a&gt; for commands explanation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Optional&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/share/applications/app_name.desktop&#xA;sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For this particular case&lt;/strong&gt;: See &lt;a href=&quot;https://chat.stackexchange.com/rooms/32464/ravan-and-ferry&quot;&gt;chat discussion&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case, the &lt;code&gt;app_name&lt;/code&gt; is xdman but the &lt;code&gt;.desktop&lt;/code&gt; is &lt;code&gt;xdm.desktop&lt;/code&gt;. So run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.local/share/applications/xdm.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me, but not to OP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, we enabled PPA, then reinstalled. Now again, removed with simple command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge xdman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-04T07:08:34.633" LastActivityDate="2015-12-04T07:08:34.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3349" PostTypeId="1" AcceptedAnswerId="3351" CreationDate="2015-12-04T06:59:03.890" Score="2" ViewCount="1246" Body="&lt;p&gt;I have Windows in my lap and installed Freya  recently. During installation I choosed something else option and installed in it.  Both install in different directory.  I can see Windows installation directory and other drives.  But it's not showing while booting os.  It boots directly Freya.  I need to select os  while booting. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="2708" LastEditDate="2015-12-04T10:05:21.430" LastActivityDate="2015-12-04T10:05:21.430" Title="How to enable dual boot menu?" Tags="|dual-boot|grub|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3351" PostTypeId="2" ParentId="3349" CreationDate="2015-12-04T07:27:09.973" Score="3" Body="&lt;p&gt;If your computer boots straight to Freya:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Run: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If not solved,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount /dev/sda6 /mnt&#xA;sudo grub-install --boot-directory=/mnt/boot /dev/sda&#xA;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: In first command &lt;code&gt;/dev/sda6&lt;/code&gt; is freya &lt;code&gt;/root&lt;/code&gt; partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not sure about partitions number use &lt;code&gt;sudo fdisk -l&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No need to run boot repair using live dvd/usb.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;At last, if anything not working, use boot-repair from live usb.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See here for instructions: &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;Boot-repair&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you want to change time for selecting OS in grub:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; value which is 10 by default. Time in seconds. If you keep -1, it will stay indefinitely until you select. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also make sure, there is a &lt;code&gt;#&lt;/code&gt; before &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt; like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-04T07:50:52.560" LastActivityDate="2015-12-04T07:50:52.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3353" PostTypeId="1" AcceptedAnswerId="3355" CreationDate="2015-12-04T11:23:52.640" Score="4" ViewCount="2255" Body="&lt;p&gt;I recently tried to install elementary OS on my Asus laptop, where I previously installed Windows 10 (it came with no OS when I bought it). The installation is weird: when I proceed with the wizard, it doesn't detect Windows 10 and tells me to either erase everything or to make a custom installation, there are no &quot;Install alongside Windows&quot; buttons. So I proceed with the custom installation. I'm doing this while booting in Legacy mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have around 4 or 5 partition (just 1 hard disk), so I split the bigger one that is around 500 GB. With the newly freed space I create a root partition of around 30 GB, a swap partition (5000 GB) and finally the home partition with the remaining space. All of these created in this order, selecting &quot;logical&quot; and placing them at the &quot;end of the space&quot; (I followed a tutorial). So now I have sda5 (root), sda6 (swap) and sda7 (home).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation goes fine, I download the updates during it and it tells me to reboot my PC. When I reboot, after I removed the USB stick as asked, it boots normally into Windows 10. No matter how I turn off the PC (holding Shift, pressing the button etc.) it always boots Windows 10. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to play around in the BIOS but basically I have two settings that determines EFI or Legacy modes: Launch CSM and Launch PXE OpROM policy. I think with both enabled I use Legacy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now an othe weird thing. If I boot with those two settings enabled, I boot Elementary OS, but if I disable just one of them I boot into Windows 10. I tried to use boot repair both on my installation of Elementary OS and on its Live CD but it always gives the error that I'm not booting in EFI, which if I do boots Windows so I can't use Boot Repair. On Windows I tried FreeBCD but the program just won't start. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;BootInfo by Boot Repair: &lt;a href=&quot;http://paste2.org/csB5BtBF&quot; rel=&quot;noreferrer&quot;&gt;http://paste2.org/csB5BtBF&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1186" LastActivityDate="2015-12-04T13:51:07.990" Title="Installing elementary OS alongside Windows 10" Tags="|dual-boot|grub|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3354" PostTypeId="1" CreationDate="2015-12-04T13:47:14.643" Score="8" ViewCount="1615" Body="&lt;p&gt;I try my best to be more clear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When we open an application, it will be shown in dock. Is it possible to open an application without make it appear in dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should be able to open chrome (&lt;strong&gt;for example&lt;/strong&gt;), but it should not be in dock.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT 1&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I have tried so far:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I opened gedit for test. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The part of output of &lt;code&gt;wmctrl -l&lt;/code&gt; is &lt;code&gt;0x03800049 0 ravan Untitled Document 1 - gedit&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -r &quot;Untitled Document 1 - gedit&quot; -b add,skip_taskbar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;do the job of skipping from dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is, I can't get it back if its minimized (win + H).&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-08T02:04:02.940" LastActivityDate="2019-12-06T07:05:51.910" Title="How can I open an application without showing it in dock?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3355" PostTypeId="2" ParentId="3353" CreationDate="2015-12-04T13:51:07.990" Score="2" Body="&lt;p&gt;Ok so this got it working for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the BIOS I kept only Launch CMS enabled (OpROM disabled).&#xA;Boot menu now has &quot;Windows Boot Manager&quot;, the hard drive and the DVD drive. &#xA;With this combination I boot into Windows 10, install rEFInd and problem solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't have Windows Boot Manager in your boot menu you have to disable CMS, save and after rebooting it will go directly into your BIOS again. Go to the boot menu and enable Windows Boot Manager, enable CMS and go back reading the previous paragraph.&lt;/p&gt;&#xA;" OwnerUserId="1186" LastActivityDate="2015-12-04T13:51:07.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3356" PostTypeId="1" AcceptedAnswerId="3357" CreationDate="2015-12-04T14:06:01.090" Score="3" ViewCount="483" Body="&lt;p&gt;I want to ask how can I make elementary OS terminal to look like Ubuntu 14.04 terminal. I don't like the design of elementary OS terminal.&lt;/p&gt;&#xA;" OwnerUserId="3013" LastEditorUserId="34" LastEditDate="2015-12-09T13:14:24.020" LastActivityDate="2015-12-09T13:14:24.020" Title="Can I make elementary terminal look like Ubuntu 14.04 Terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3357" PostTypeId="2" ParentId="3356" CreationDate="2015-12-04T14:52:51.197" Score="2" Body="&lt;p&gt;I think its not possible to convert elementary terminal to Ubuntu terminal. The possible case is: Install Ubuntu terminal i.e.,&lt;code&gt;gnome-terminal&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To change default terminal,see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1344/how-can-i-change-the-default-terminal-app&quot;&gt;How can I change the default Terminal app?&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To launch from app launcher:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3031/unable-to-launch-gnome-terminal-from-app-launcher&quot;&gt;Unable to launch gnome-terminal from app launcher&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For alternatives to &lt;code&gt;pantheon-terminal&lt;/code&gt; see&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3028/are-there-any-alternatives-to-the-default-terminal-pantheon-terminal&quot;&gt;Are there any alternatives to the default terminal, pantheon terminal? &lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-04T14:52:51.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3358" PostTypeId="1" CreationDate="2015-12-04T15:30:38.647" Score="1" ViewCount="686" Body="&lt;p&gt;I decided to leave windows and use Linux, but I have a problem - when I installed elementary OS I couldn't boot, a black screen appeared and says &quot;minimal BASH like line editing is supported...&quot; and that is it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use boot-repair in a live USB, but it didn't work, &lt;a href=&quot;http://paste2.org/g0MBjjkE&quot; rel=&quot;nofollow&quot;&gt;here is the info that boot-repair shows me&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2716/error-in-grub-minimal-bash-like-line-editing-is-supported-for&quot;&gt;I've tried both of these&lt;/a&gt; but nothing works, can anyone help me please??&lt;/p&gt;&#xA;" OwnerUserId="3315" LastEditorUserId="2926" LastEditDate="2015-12-05T01:26:59.127" LastActivityDate="2015-12-05T16:24:59.970" Title="i can't boot elemntary os freya &quot;minimal BASH like line editing is supported&quot;" Tags="|boot|grub|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3360" PostTypeId="1" CreationDate="2015-12-04T17:15:58.013" Score="1" ViewCount="209" Body="&lt;p&gt;Please help me!!!&#xA;Installation commenced fine at the beginning but stuck at during installing grub or bootloader? How to fix this prob to install Elementary OS on to a flash drive?&lt;/p&gt;&#xA;" OwnerUserId="3318" LastActivityDate="2024-03-23T09:01:30.163" Title="latest downloaded ISO file cant install bootloader on to flashdrive" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3362" PostTypeId="1" CreationDate="2015-12-04T19:25:47.723" Score="9" ViewCount="635" Body="&lt;p&gt;My Geary email client isn't opening. I've tried restarting and it didn't fix it. I still get notifications and if I right click I can click to compose a message - which pops up just fine, but the main email client will not open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a theory:&#xA;I had a second monitor connected in which I was viewing Geary on. I'm now only using my built in laptop screen. Could Geary still be trying to display on the second monitor even though its not connected?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried Googleing this issue with no results. :/&lt;/p&gt;&#xA;" OwnerUserId="3321" LastEditorUserId="3321" LastEditDate="2015-12-04T19:41:44.960" LastActivityDate="2016-02-02T22:45:07.550" Title="Geary Won't Open" Tags="|release-freya|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3363" PostTypeId="2" ParentId="3362" CreationDate="2015-12-04T19:45:15.343" Score="3" Body="&lt;p&gt;I actually was able to get it to work again, I'll leave my solution here just in case someone else runs into this problem:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;right click Geary and click compose new message.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then open up Terminal and type xkill&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now your cursor should be an x. just click on the compose new message window.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now open up Geary as normal - it should work fine.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3321" LastActivityDate="2015-12-04T19:45:15.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3365" PostTypeId="1" CreationDate="2015-12-05T03:12:28.640" Score="4" ViewCount="385" Body="&lt;p&gt;I have tried to install Elementary OS on my external hard drive (1TB, USB3.0).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer is using UEFI and is alredy dual booting Ubuntu MATE and Windows 10. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a Live USB with UNetbootin, and installed Elementary to my external hard drive from it. I choose something else, choose my partition to mount as / (/dev/sdc2) and choose to install grub on my hard drive (/dev/sdc), and created an efi partition, with esp and boot flags(/dev/sdc4) It installed sucessfully. When I reboot, I choose to boot to my hard drive from f12 boot menu, and I have got the &quot;grub&gt;&quot; minimal bash-like command line. I followed the instruction on this post : &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1492801&quot; rel=&quot;nofollow&quot; title=&quot;Launchpad bug&quot;&gt;Launchpad bug&lt;/a&gt;. I have been able to have the grub menu of elementary and to boot on it. Then the elementary logo appears and then I fall in a ash shell, exactly like in this post : &lt;a href=&quot;http://www.linuxquestions.org/questions/linux-newbie-8/elementary-os-freya-failed-waiting-boot-device-4175537201/&quot; rel=&quot;nofollow&quot;&gt;Same problem&lt;/a&gt;, but no working answer is posted here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried before without EFT partition. Then I reboot and from bios boot menu f12, there was no option for my hard drive. Legacy is not working on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to run boot repair but it doesn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I though that mabe the problem is that my partition table is msdos and not gpt.&lt;/p&gt;&#xA;" OwnerUserId="3324" LastActivityDate="2015-12-05T03:12:28.640" Title="Full install of Freya 0.3.1 on external hard drive USB 3.0" Tags="|release-freya|system-installation|boot|usb-drive|efi|" AnswerCount="0" CommentCount="2" ClosedDate="2017-08-16T19:58:22.780" ContentLicense="CC BY-SA 3.0" />
  <row Id="3366" PostTypeId="2" ParentId="3342" CreationDate="2015-12-05T03:51:01.977" Score="0" Body="&lt;p&gt;I found my answer, all I had to to was install a package called thunderbird-gnome-support that somehow was not installed by default.&lt;/p&gt;&#xA;" OwnerUserId="3124" LastActivityDate="2015-12-05T03:51:01.977" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3367" PostTypeId="2" ParentId="3358" CreationDate="2015-12-05T04:35:13.070" Score="0" Body="&lt;p&gt;I had the same problem after installing Freya.  I think I solved it by starting boot-repair from a live USB, then opening the advanced options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think I unchecked &quot;Restore EFI Backups&quot; and made sure &quot;Reinstall Grub&quot; and &quot;Purge GRUB before reinstalling it were checked&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was then able to boot.  There were lots of GRUB menu items so I installed GRUB customizer and used it to edit the GRUB menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2015-12-05T04:35:13.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3370" PostTypeId="2" ParentId="3272" CreationDate="2015-12-05T09:32:37.543" Score="1" Body="&lt;p&gt;You can choose how you install elementary OS. In the installer, you will probably have these choices : &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Erase Ubuntu and reinstall : Install elementary in the ubuntu partition&lt;/li&gt;&#xA;&lt;li&gt;Erase disk and install : Take the full disk only for elementary&lt;/li&gt;&#xA;&lt;li&gt;Something else.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Something else will bring you in a partitionning tool. You have to reduce one of your existing partitions and create a new one if you want to install elementary OS + Ubuntu + Windows (I personally don't recommend this, if you do, be careful with grub.)&lt;/p&gt;&#xA;" OwnerUserId="3326" LastEditorUserId="34" LastEditDate="2015-12-06T03:38:10.280" LastActivityDate="2015-12-06T03:38:10.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3371" PostTypeId="2" ParentId="2047" CreationDate="2015-12-05T09:43:32.967" Score="1" Body="&lt;p&gt;To create an EFI partition, with GParted:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Create a minimum 100 MB partition formated in fat32 (250MB recomended)&lt;/li&gt;&#xA;&lt;li&gt;Apply changes (green OK logo)&lt;/li&gt;&#xA;&lt;li&gt;Select your partition and go into partition -&gt; manage flags, select boot, esp (I don't really know what esp is but it is selected on my efi partition and I have read somewhere that you need it)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Note : The efi partition shoud be a primary partition (number 1 to 4), and can be anywhere on the disk. Placing it at the begining is not safe (still works on my computer).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then when you will install elementary OS, it should use it by default if you choose one of the &quot;automatic&quot; choices, and if you chose something else, you will need to click on your partition, click change, and mount it as /boot/EFI.&lt;/p&gt;&#xA;" OwnerUserId="3326" LastEditorUserId="34" LastEditDate="2015-12-06T09:24:26.043" LastActivityDate="2015-12-06T09:24:26.043" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3372" PostTypeId="2" ParentId="1871" CreationDate="2015-12-05T09:45:43.097" Score="2" Body="&lt;p&gt;This is how I installed HPLIP 3.15.11 to support a HP Color LaserJet M277n on Freya 0.3.1:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Remove old HPLIP&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove hplip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Install dependencies&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gcc build-essential python-dev libcups2-dev libusb-1.0-0 libtool libcupsimage2-dev libsane-dev libsnmp-dev python-qt4 python-qt4-dbus python-dev xsane&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Set a root password, the installer will ask for it&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo passwd (somepass)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Run the installer&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sh hplip-3.15.11.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Choose auto installation&#xA;Distro selection: Ubuntu, 14.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installer defaults for everything else&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Auto discovery didn't find anything, but a manual IP address selection worked fine.  I was prompted to run 'hp-plugin' to install a binary plugin for this printer during the printer setup process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Printing and scanning now both work for me.&lt;/p&gt;&#xA;" OwnerUserId="3327" LastEditorUserId="242" LastEditDate="2015-12-09T13:15:37.447" LastActivityDate="2015-12-09T13:15:37.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3373" PostTypeId="1" AcceptedAnswerId="3387" CreationDate="2015-12-05T10:27:14.217" Score="5" ViewCount="1186" Body="&lt;p&gt;Not sure anyone on the dev team will get this but I just wanted to say I really like elementary OS. I do a lot of php app development with my acer aspire one (8GB SSD) and when I was looking for a lightweight Linux OS for my netbook I found elementary OS. But with every update it grows bigger. The computer says I have 60MB left. This is sad because now I have to look for another lightweight os and start over.&lt;/p&gt;&#xA;" OwnerUserId="3328" LastEditorUserId="3757" LastEditDate="2016-05-05T07:06:14.243" LastActivityDate="2016-12-27T10:38:26.793" Title="elementary OS disk space getting low" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3374" PostTypeId="1" CreationDate="2015-12-05T10:54:37.737" Score="1" ViewCount="16" Body="&lt;p&gt;Just now i got an Notification Update. so i installed it after that i reboot my PC then the panel disappear you can see at this picture. Any idea Please???&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vg6tk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vg6tk.jpg&quot; alt=&quot;Panel disappear&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and here output of &lt;code&gt;apt-cache policy indicator-synapse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;indicator-synapse:&#xA;  Installed: 0.525-0~trusty~NoobsLab.com&#xA;  Candidate: 0.525-0~trusty~NoobsLab.com&#xA;     Version table:&#xA;       *** 0.525-0~trusty~NoobsLab.com 0&#xA;             500 http://ppa.launchpad.net/noobslab/apps/ubuntu/ trusty/main amd64 Packages&#xA;             100 /var/lib/dpkg/status&#xA;              0~529-0~ubuntu14.04.1 0&#xA;              500 http://ppa.launchpad.net/elementary-os/unstable-upstream/ubuntu/ trusty/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3035" LastEditorUserId="3757" LastEditDate="2016-05-06T14:34:19.827" LastActivityDate="2016-05-06T14:34:19.827" Title="elementary OS freya Panel Disappear" Tags="|wingpanel|updates|" AnswerCount="0" CommentCount="1" ClosedDate="2015-12-05T11:25:18.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="3375" PostTypeId="2" ParentId="2047" CreationDate="2015-12-05T13:21:12.643" Score="2" Body="&lt;p&gt;I faced the same problem and solved it by connecting my pc to internet using ethernet. This will repair the grup-pc on the fly and will fix this error.&lt;/p&gt;&#xA;" OwnerUserId="3330" LastActivityDate="2015-12-05T13:21:12.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3376" PostTypeId="2" ParentId="3358" CreationDate="2015-12-05T15:17:50.247" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;Boot from the Live CD&lt;/li&gt;&#xA;&lt;li&gt;Open &lt;code&gt;gparted&lt;/code&gt; &amp;rarr; Right Click on &lt;code&gt;sda1&lt;/code&gt; &amp;rarr; Flags: Check &lt;code&gt;boot&lt;/code&gt;, quit&lt;/li&gt;&#xA;&lt;li&gt;Open terminal&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount partitions&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir ~/efi&#xA;mkdir ~/root&#xA;sudo mount /dev/sda1 ~/efi/&#xA;sudo mount /dev/sda2 ~/root/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reinstall &lt;code&gt;grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo grup-install --efi-directory=/home/elementary/efi/ --root-directory=/home/elementary/root/ /dev/sda&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="2708" LastEditDate="2015-12-05T16:24:59.970" LastActivityDate="2015-12-05T16:24:59.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3377" PostTypeId="1" CreationDate="2015-12-05T15:58:48.507" Score="1" ViewCount="25" Body="&lt;p&gt;The story so far...&#xA;Have an Acer Chromebook 15, entered Dev Mode and have been playing with booting Elementary from a memory stick - decided to install on the hard disc. Downloaded the latest .iso (elementaryos-stable-0.3.1-amd64.20150903.iso - 28/11/15) and rebooted with this, then went through the install process and opted to wipe the Chrome OS (I have a recovery disc and have confirmed that it works).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation went fine, rebooted successfully several times, installed Chromium Browser, installed Tweaks (via apt-get) and everything seemed good. Then got a message stating that there were upgrades available (can't now remember where the message came from - might have been the Software Center) - so installed the updates. Message stated that I must reboot to continue update - reboot now or later? Choose reboot now, got the usual 'scary screen', pressed Ctrl-D and that was it - nothing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turned it on and off several times - same outcome, nothing happens at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can reboot using the USB stick, but not from the hard disc. I can also get the option to restore the Chrome OS - but it's Elementary I want. Anybody got any ideas as to what I've done wrong and/or any suggestions for a work around?&#xA;Bob&lt;/p&gt;&#xA;" OwnerUserId="3331" LastActivityDate="2015-12-05T15:58:48.507" Title="Advice on running Freya on Chrome book - not booting from hard disc" Tags="|release-freya|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3378" PostTypeId="1" CreationDate="2015-12-05T17:02:00.520" Score="0" ViewCount="28" Body="&lt;p&gt;I just installed Fotos from the &quot;Made for Elementary&quot; App Store-App and have a small problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open an image that is located in a folder of more images I can't skip to the next image either by using the GUI arrows, the arrow keys on the keyboard or the space bar. What am I missing here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rOyqa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rOyqa.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NXuLj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NXuLj.png&quot; alt=&quot;version&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2922" LastEditorUserId="2922" LastEditDate="2015-12-06T09:38:03.550" LastActivityDate="2015-12-06T09:38:03.550" Title="Can't skip images in Fotos" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3379" PostTypeId="1" CreationDate="2015-12-05T17:02:48.563" Score="0" ViewCount="11913" Body="&lt;p&gt;What is the best torrent client and is there a client that has a search feature? I mean not to search for local torrent files, but to search for files to download.&lt;/p&gt;&#xA;" OwnerUserId="3333" LastEditorUserId="26" LastEditDate="2016-10-09T19:31:15.960" LastActivityDate="2021-04-16T18:34:55.467" Title="What is the best torrent client on elementary OS?" Tags="|applications|software-recommendation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3380" PostTypeId="2" ParentId="1268" CreationDate="2015-12-05T17:10:47.703" Score="2" Body="&lt;p&gt;My settings.ini was empty so I actually had to add Settings section to ~/.config/gtk-3.0/settings.ini &lt;code&gt;[Settings]&#xA;gtk-menu-bar-accel=&quot;&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3334" LastActivityDate="2015-12-05T17:10:47.703" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3381" PostTypeId="2" ParentId="3379" CreationDate="2015-12-05T20:50:47.257" Score="4" Body="&lt;p&gt;I quite like qBittorrent (&lt;code&gt;sudo apt install qbittorent&lt;/code&gt; if the command-line is your thing)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if it is the best - I haven't done that much testing - but it satisfies your requirement for searching (it has a whole bunch of built-in searches, and you can add more), and I think the interface is quite nice&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're new to Linux, you might find &lt;a href=&quot;http://alternativeto.net&quot; rel=&quot;nofollow&quot;&gt;http://alternativeto.net&lt;/a&gt; useful, it allows for you to search for applications that you might be familiar with on other platforms and provides suggestions for possible alternatives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The site features user ratings to give you an idea of what the replacement apps are like.&lt;/p&gt;&#xA;" OwnerUserId="3233" LastEditorUserId="26" LastEditDate="2016-10-02T14:35:29.213" LastActivityDate="2016-10-02T14:35:29.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3383" PostTypeId="2" ParentId="1408" CreationDate="2015-12-05T22:01:45.750" Score="1" Body="&lt;p&gt;If faced such problem some time ago, when I got a &lt;code&gt;libc&lt;/code&gt; update in a machine with nVidia proprietary driver install, It hanged with blinking leds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution was:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Reboot and Press &lt;kbd&gt;Shift&lt;/kbd&gt; to show grub menu&lt;/li&gt;&#xA;&lt;li&gt;Select recovery mode.&lt;/li&gt;&#xA;&lt;li&gt;Run a file system check&lt;/li&gt;&#xA;&lt;li&gt;Enable network&lt;/li&gt;&#xA;&lt;li&gt;Drop to shell&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Continue installation there&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and install Wine (if previous command didn't)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install wine&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;reboot&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2015-12-05T22:01:45.750" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3384" PostTypeId="2" ParentId="3379" CreationDate="2015-12-06T01:22:18.513" Score="9" Body="&lt;p&gt;Transmission will be your best bet since it is also written in GTK+, it is integrated well with elementary OS. Note that it doesn't have a search features but it is the &lt;a href=&quot;http://pastehtml.com/view/5tx16jw.html&quot;&gt;best client&lt;/a&gt; in terms of CPU usage and RAM usage while downloading. &lt;/p&gt;&#xA;" OwnerDisplayName="user1025" LastActivityDate="2015-12-06T01:22:18.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3385" PostTypeId="2" ParentId="3378" CreationDate="2015-12-06T03:32:09.947" Score="1" Body="&lt;p&gt;It is a bug. see &lt;a href=&quot;https://bugs.launchpad.net/foto/+bug/1088109&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;you may consider to confirm ... consider confirming the bug !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The available version of foto is 1.0 which is testing, see &lt;a href=&quot;https://launchpad.net/foto&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the bug report- status: Fix commited.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Fix Committed  means:&lt;br&gt;&#xA;  Fixed, but not available until next release.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-06T03:32:09.947" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3386" PostTypeId="1" CreationDate="2015-12-06T13:19:54.737" Score="2" ViewCount="521" Body="&lt;p&gt;I am using Elementary OS Freya. All my system tray icons like chrome, hangouts,Geary etc. which used to show on Ubuntu 14.04 are not showing on elementary OS. Is there any way i can get these system tray icons on elementary OS too? I would be happy to provide any extra info about my system if needed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: The default icons for sound, network, and power are there. All the external application icons are not showing.&lt;/p&gt;&#xA;" OwnerUserId="3339" LastEditorUserId="2708" LastEditDate="2015-12-06T13:27:38.950" LastActivityDate="2016-01-05T22:07:40.103" Title="No system tray icons showing at all!" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="2" ClosedDate="2016-02-03T01:46:11.043" ContentLicense="CC BY-SA 3.0" />
  <row Id="3387" PostTypeId="2" ParentId="3373" CreationDate="2015-12-06T14:08:19.587" Score="5" Body="&lt;p&gt;It's probably kernel updates that are eating your SSD space. Regular updates just replace apps with newer version but kernel is so crucial that if something goes wrong in the new version you can be unable to boot your machine. For this reason old kernels are kept in the system so you have always working kernel to boot from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can check how many kernels you have and if this is your case by running in terminal e.g.:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also check what eats most space with apps like &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/baobab/&quot; rel=&quot;nofollow noreferrer&quot;&gt;baobab&lt;/a&gt; or &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/oneiric/gdmap/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GdMap&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can remove those older kernels and keep only the last two (recommended for the reasons above). On Ubuntu the &lt;a href=&quot;https://askubuntu.com/questions/2793/how-do-i-remove-or-hide-old-kernel-versions-to-clean-up-the-boot-menu&quot;&gt;most recommended way&lt;/a&gt; is to install Ubuntu Tweak, however this might not be the optimal way on elementary OS. You can try installing &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/synaptic/&quot; rel=&quot;nofollow noreferrer&quot;&gt;synaptic&lt;/a&gt; and remove old kernels manually or try some terminal scripts (one example can be found on &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2240697&quot; rel=&quot;nofollow noreferrer&quot;&gt;ubuntuforums&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But before doing anything I recommend doing a bit of reading on this topic here at &lt;a href=&quot;https://askubuntu.com/questions/2793/how-do-i-remove-or-hide-old-kernel-versions-to-clean-up-the-boot-menu&quot;&gt;StackExchange/AskUbuntu&lt;/a&gt; to get an idea what's going on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;In Loki:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to upstream fix apt autoremove now properly removes old kernels so you can use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove all unnecessary packages, including old kernels. It's also good idea to run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;once in a while.&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-12-27T10:38:26.793" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3388" PostTypeId="1" AcceptedAnswerId="3405" CreationDate="2015-12-06T14:13:14.680" Score="3" ViewCount="875" Body="&lt;p&gt;I am using elementary os freya. I followed &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3117/how-can-i-install-skype-on-freya&quot;&gt;this post&lt;/a&gt; to install skype.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install skype&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;skype : Depends: skype-bin&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install sni-qt:i386&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;sni-qt:i386 : Depends: libc6:i386 (&amp;gt;= 2.2) but it is not going to be installed&#xA;           Depends: libdbusmenu-qt2:i386 (&amp;gt;= 0.3.2) but it is not going to be installed&#xA;           Depends: libgcc1:i386 (&amp;gt;= 1:4.1.1) but it is not going to be installed&#xA;           Depends: libqt4-dbus:i386 (&amp;gt;= 4:4.6.1) but it is not going to be installed&#xA;           Depends: libqtcore4:i386 (&amp;gt;= 4:4.7.3-1ubuntu3~) but it is not going to be installed&#xA;           Depends: libqtgui4:i386 (&amp;gt;= 4:4.7.3) but it is not going to be installed&#xA;           Depends: libstdc++6:i386 (&amp;gt;= 4.1.1) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;No error message in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update    &#xA;sudo apt-get upgrade    &#xA;sydo apt-get dist-upgrade    &#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also tried to install from synaptic, it almost removing all indicators etc. Also it shows the package is broken.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install libc6:i386 libdbusmenu-qt2:i386 libgcc1:i386 libqt4-dbus:i386 libqtcore4:i386 libqtgui4:i386 libstdc++6:i386&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;   libqt4-dbus:i386 : Depends: libqtdbus4:i386 (= 4:4.8.5+git192-g085f851+dfsg-2ubuntu4.1+elementary3~ubuntu0.3.1) but it is not going to be installed&#xA;                Depends: qdbus:i386 (= 4:4.8.5+git192-g085f851+dfsg-2ubuntu4.1+elementary3~ubuntu0.3.1)&#xA; libqtcore4:i386 : Depends: libglib2.0-0:i386 (&amp;gt;= 2.22.0) but it is not going to be installed&#xA; libqtgui4:i386 : Depends: fontconfig:i386&#xA;              Depends: libaudio2:i386 but it is not going to be installed&#xA;              Depends: libfontconfig1:i386 (&amp;gt;= 2.9.0) but it is not going to be installed&#xA;              Depends: libfreetype6:i386 (&amp;gt;= 2.3.5) but it is not going to be installed&#xA;              Depends: libglib2.0-0:i386 (&amp;gt;= 2.12.0) but it is not going to be installed&#xA;              Depends: libice6:i386 (&amp;gt;= 1:1.0.0) but it is not going to be installed&#xA;              Depends: libpng12-0:i386 (&amp;gt;= 1.2.13-4) but it is not going to be installed&#xA;              Depends: libqt4-declarative:i386 (= 4:4.8.5+git192-g085f851+dfsg-2ubuntu4.1+elementary3~ubuntu0.3.1) but it is not going to be installed&#xA;              Depends: libsm6:i386 but it is not going to be installed&#xA;              Depends: libxext6:i386 but it is not going to be installed&#xA;              Depends: libxi6:i386 (&amp;gt;= 2:1.2.99.4) but it is not going to be installed&#xA;              Depends: libxrender1:i386 but it is not going to be installed&#xA;              Recommends: libcups2:i386 but it is not going to be installed&#xA;              Recommends: qt-at-spi:i386 but it is not going to be installed&#xA; libstdc++6:i386 : Depends: gcc-4.8-base:i386 (= 4.8.2-19ubuntu1) but it is not going to be installed&#xA; E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt; 1:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even tried from direct download, it shows Internal error, could not open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 2&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade&#xA;[sudo] password for ravan: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Starting pkgProblemResolver with broken count: 0&#xA;Starting 2 pkgProblemResolver with broken count: 0&#xA;Done&#xA;Done&#xA;Starting pkgProblemResolver with broken count: 0&#xA;Starting 2 pkgProblemResolver with broken count: 0&#xA;Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 3&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install --no-install-recommends skype&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;   skype : Depends: skype-bin&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="1239" LastEditDate="2015-12-09T15:36:31.017" LastActivityDate="2015-12-12T15:24:37.357" Title="Unable to install skype on elementary OS" Tags="|software-installation|apt|skype|dependencies|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3390" PostTypeId="1" CreationDate="2015-12-06T15:47:47.397" Score="4" ViewCount="195" Body="&lt;p&gt;On my Asus X301A I have only Elementary OS Freya installed. Everything was great but at some point of time it started to boot to Aptio Setup Utility which is UEFI on my laptop, as far as I understand. So it boots there almost all the time, but sometimes I reload and it boots normally to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried Boot-Repair tool several times, after one 'repair' it seemed that it was finally fixed, as laptop booted normally for some time, but then I installed some updates and it started again...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is one of my boot-info summaries: &lt;a href=&quot;http://paste2.org/m52Mt48U&quot; rel=&quot;nofollow&quot;&gt;http://paste2.org/m52Mt48U&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks in advance!!&lt;/p&gt;&#xA;" OwnerUserId="3340" LastEditorUserId="45" LastEditDate="2015-12-14T05:13:21.040" LastActivityDate="2016-04-13T13:00:01.773" Title="Cannot boot to elementary OS, boots to UEFI instead" Tags="|release-freya|boot|uefi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3391" PostTypeId="1" CreationDate="2015-12-06T16:16:46.053" Score="0" ViewCount="1577" Body="&lt;p&gt;So I have a 320 GB hdd. It is currently partitioned as /, swap and /home with Linux Mint already installed. Their sizes are 30 GB for /, 6 GB for swap and the rest is for /home. How do I go about installing elementary?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I want to delete the /home partition of Linux Mint and keep only / and swap, just like the default installation. How do I do that? Will there be any problem?&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If I install elementary will I need another swap or can it be shared by two different Linux OSes? What to do?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I also want a separate partition which will store my documents, songs and movies which will be accessible by both OSes. How do I do that?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It will be the first time I'll be dual booting. What are the disadvantages, if any?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If I need to upgrade any of the OS in future it won't be much trouble, right?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So guys please help me out here. :)&lt;/p&gt;&#xA;" OwnerUserId="378" LastActivityDate="2017-08-26T07:38:19.890" Title="Want to dual boot elementary OS with Linux Mint. Need some guidance and questions answered" Tags="|dual-boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3394" PostTypeId="2" ParentId="2706" CreationDate="2015-12-06T21:03:23.137" Score="4" Body="&lt;p&gt;Finally the best way to solve this problem is installing Nvidia Graphics driver and choose Intel Graphics device in Nvidia X Server Panel. After reboot, now I can shutdown and reboot my laptop normally.&lt;/p&gt;&#xA;" OwnerUserId="2892" LastEditorUserId="2892" LastEditDate="2016-05-11T11:51:52.230" LastActivityDate="2016-05-11T11:51:52.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3395" PostTypeId="2" ParentId="3386" CreationDate="2015-12-06T21:37:28.310" Score="0" Body="&lt;p&gt;There is no &quot;system tray&quot; in elementary OS. There is an indicator API, but these apps are probably using an old, deprecated API that is no longer supported.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-06T21:37:28.310" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3396" PostTypeId="2" ParentId="3262" CreationDate="2015-12-06T22:14:54.770" Score="2" Body="&lt;p&gt;For a dumb reason you need to run &lt;code&gt;sudo apt-get install wine elementary-desktop&lt;/code&gt; or else it might break Freya. Just be careful and use this command instead-it's what I used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where I got this from: click &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2vif13/psa_do_not_install_wine_it_breaks_freya/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this helps :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alexei &lt;/p&gt;&#xA;" OwnerUserId="3345" LastActivityDate="2015-12-06T22:14:54.770" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3398" PostTypeId="2" ParentId="3354" CreationDate="2015-12-07T06:56:16.840" Score="7" Body="&lt;p&gt;The dock of elementary OS is &lt;code&gt;plank&lt;/code&gt;. So I analyzed the &lt;code&gt;plank&lt;/code&gt; source and found the reason why it could not process skip taskbar option of windows.&#xA;So I modified two parts of the plank to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;First&lt;/strong&gt;, it gets the number of windows of the application includes skip taskbar optioned windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We can find exact source function from the &lt;code&gt;plank&lt;/code&gt; source.&#xA;It's &lt;code&gt;get_num_windows&lt;/code&gt; function of &lt;code&gt;lib/Services/WindowControl.vala&lt;/code&gt; .&#xA;At following, I added a condition to check &lt;code&gt;is_skip_tasklist&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public static uint get_num_windows (Bamf.Application app)&#xA;{&#xA;    Wnck.Screen.get_default ();&#xA;    Array&amp;lt;uint32&amp;gt;? xids = app.get_xids ();&#xA;&#xA;    warn_if_fail (xids != null);&#xA;&#xA;    uint count = 0;&#xA;&#xA;    for (var i = 0; xids != null &amp;amp;&amp;amp; i &amp;lt; xids.length; i++) {&#xA;        unowned Wnck.Window window = Wnck.Window.@get (xids.index (i));&#xA;        if (window != null &amp;amp;&amp;amp; window.get_transient () == null &amp;amp;&amp;amp; !window.is_skip_tasklist ()) /* LOOK, should be added &amp;amp;&amp;amp; !window.is_skip_tasklist() */&#xA;            count++;&#xA;    }&#xA;&#xA;    return count;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Second&lt;/strong&gt;, it could not process indicator when the skip taskbar option of the windows is changed. The related part of the source is &lt;code&gt;handle_user_visible_changed&lt;/code&gt; function of &lt;code&gt;lib/Items/ApplicationDockItem.vala&lt;/code&gt; .&#xA;I added a line at the function as following.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;void handle_user_visible_changed (bool user_visible)&#xA;{&#xA;    update_indicator (); /* LOOK, should be called */&#xA;    if (user_visible) {&#xA;        app_window_added ();&#xA;        return;&#xA;    }&#xA;&#xA;    if (this is TransientDockItem)&#xA;        App = null;&#xA;&#xA;    app_closed ();&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Following simple python script is what visible/invisible special application on the plank. Before run this script, you should install python wnck module with the command, &lt;code&gt;$ sudo apt-get install python-wnck&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/python&#xA;&#xA;import wnck&#xA;import sys&#xA;&#xA;if __name__ == &quot;__main__&quot;:&#xA;    if len(sys.argv) != 3:&#xA;        print &quot;Usage: appvisible &amp;lt;appname&amp;gt; &amp;lt;1|0&amp;gt;&quot;&#xA;        sys.exit(0)&#xA;&#xA;    processname = sys.argv[1]&#xA;    visible = sys.argv[2]&#xA;&#xA;    screen = wnck.screen_get_default()&#xA;    screen.force_update()&#xA;&#xA;    for window in screen.get_windows():&#xA;        if window.get_class_group().get_name() == processname:&#xA;            if visible == &quot;1&quot;:&#xA;                window.set_skip_tasklist(True)&#xA;            else:&#xA;                window.set_skip_tasklist(False)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It can be used as following way.&#xA;&lt;code&gt;$ appvisible gedit 0&lt;/code&gt; - visible gedit on plank, &lt;code&gt;$ appvisible gedit 1&lt;/code&gt; - invisible gedit on plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additional edit for un-minimize the skipped &amp;amp; minimized window.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/python&#xA;&#xA;import gtk&#xA;import wnck&#xA;import sys&#xA;import time&#xA;&#xA;if __name__ == &quot;__main__&quot;:&#xA;    if len(sys.argv) != 2:&#xA;        print &quot;Usage: unminimize &amp;lt;-l|appname&amp;gt;&quot;&#xA;        sys.exit(0)&#xA;&#xA;    appname = sys.argv[1]&#xA;&#xA;    screen = wnck.screen_get_default()&#xA;    screen.force_update()&#xA;&#xA;    for window in screen.get_windows():&#xA;        if not window.is_minimized():&#xA;            continue&#xA;        if not window.is_skip_tasklist():&#xA;            continue&#xA;        if appname == '-l':&#xA;            print window.get_class_group().get_name()&#xA;        elif window.get_class_group().get_name() == appname:&#xA;            window.unminimize(gtk.gdk.x11_get_server_time(gtk.gdk.get_default_root_window()))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can use it as &lt;code&gt;./unminimize -l&lt;/code&gt; - list skipped &amp;amp; minimized windows, &lt;code&gt;./unminimize appname&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3349" LastEditorUserId="308" LastEditDate="2019-12-06T07:05:51.910" LastActivityDate="2019-12-06T07:05:51.910" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="3399" PostTypeId="2" ParentId="3373" CreationDate="2015-12-07T08:25:24.407" Score="6" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;baobab&lt;/code&gt; will let you figure out what files and folders are taking up all the space on your hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;baobab&lt;/code&gt; with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install baobab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Select any file from the table on the left side to move it to trash on right click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/tFgxU.png&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To remove old kernels follow the post:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/2467/2708&quot;&gt;How to remove old kernel versions?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1986/boot-partition-low-space-warnings-problems-doing-updates-tried-another-simila&quot;&gt;Boot partition low space warnings - problems doing updates&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To remove unnecessary files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1144/how-can-i-clean-the-system-from-unnecessary-files?lq=1&quot;&gt;How can I clean the system from unnecessary files?&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-07T08:25:24.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3400" PostTypeId="1" AcceptedAnswerId="3401" CreationDate="2015-12-07T09:50:57.663" Score="1" ViewCount="514" Body="&lt;p&gt;I have download teamviewer.deb and click on it . It opened in Ubuntu Software center. And it shows the error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cant install libc6:i386 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so i found this below command and i tried it on terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libc6-amd64 libc6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it shows some error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;libc6 is already the newest version.&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;  libc6-amd64:i386 : Depends: libc6:i386 (= 2.19-0ubuntu6) but it is not            going to be installed&#xA; E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this is the output of `apt-cache policy libc6:i386'&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; libc6:i386:&#xA;  Installed: (none)&#xA;  Candidate: 2.19-0ubuntu6&#xA;  Version table:&#xA; 2.19-0ubuntu6 0&#xA;    500 http://in.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is the screenshot of exact one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/k8UQx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k8UQx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2015-12-07T10:42:57.773" LastActivityDate="2015-12-07T15:42:16.147" Title="Teamviewer installation failed" Tags="|software-installation|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3401" PostTypeId="2" ParentId="3400" CreationDate="2015-12-07T10:15:36.853" Score="2" Body="&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update #updates packages&#xA;sudo apt-get install -f #installs any missing packages if any&#xA;sudo apt-get install gcc-4.9-base:i386 libc6:i386 libgcc1:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-07T15:42:16.147" LastActivityDate="2015-12-07T15:42:16.147" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3403" PostTypeId="1" AcceptedAnswerId="3404" CreationDate="2015-12-07T10:26:16.070" Score="1" ViewCount="887" Body="&lt;p&gt;How can I change system name in my freya os. It has some extended text. I want to rename it. I try read some command like the below one, which has no success for me &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /etc/hostname&#xA;sudo /etc/hosts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;i guess there is simple way to rename it &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-12-07T11:26:18.663" Title="How to rename system name on Freya" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3404" PostTypeId="2" ParentId="3403" CreationDate="2015-12-07T11:26:18.663" Score="2" Body="&lt;p&gt;You forgot to execute an texteditor to edit these files.&#xA;Example of editors are scratch-text-editor, gedit, nano, vi,... . &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/hostname&#xA;sudo scratch-text-editor /etc/hosts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For the &lt;code&gt;/etc/hosts&lt;/code&gt; file just make sure their is a entry to your new hostname and delete the old one&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;127.0.1.1       newhostname&#xA;127.0.1.1       oldhostname #delete this one&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Than you just restart your computer.&lt;/p&gt;&#xA;" OwnerUserId="2552" LastActivityDate="2015-12-07T11:26:18.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3405" PostTypeId="2" ParentId="3388" CreationDate="2015-12-07T12:03:53.457" Score="4" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;The quickest way to find such problem is to verify the enabled repositories in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file directly and don't trust &lt;code&gt;software-properties-gtk&lt;/code&gt; GUI tool. &lt;code&gt;trusty-security&lt;/code&gt; &amp;amp; &lt;code&gt;trusty-updates&lt;/code&gt; should have same component (&lt;code&gt;main universe multiverse restricted&lt;/code&gt;) same as in &lt;code&gt;trusty&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You have the update channel disabled, if you look for example:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;libcgmanager0:&#xA;  Installed: 0.24-0ubuntu7.5&#xA;  Candidate: 0.24-0ubuntu7.5&#xA;  Version table:&#xA; *** 0.24-0ubuntu7.5 0&#xA;        100 /var/lib/dpkg/status&#xA;     0.24-0ubuntu5 0&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty/main amd64 Package&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;From output of: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy $(apt-rdepends skype 2&amp;gt;/dev/null | grep &quot;^[a-zA-Z]&quot; | sort | paste -s -d&quot; &quot;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You see that you have already &lt;code&gt;0.24-0ubuntu7.5&lt;/code&gt; from the &lt;code&gt;trusty-updates/main&lt;/code&gt; repository but the available ones is just &lt;code&gt;0.24-0ubuntu5&lt;/code&gt; from &lt;code&gt;trusty/main&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So, to fix it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;em&gt;Software &amp;amp; Updates&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;em&gt;Updates&lt;/em&gt; tab.&lt;/li&gt;&#xA;&lt;li&gt;Check &lt;code&gt;trusty-updates&lt;/code&gt; to enable it.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Close &amp;amp; Reload.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/eHvKR.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: If already enabled, please disable--&gt; close without reload --&gt; again enable --&gt; close and reload.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then try installing Skype again.&lt;/p&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2015-12-12T15:24:37.357" LastActivityDate="2015-12-12T15:24:37.357" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3406" PostTypeId="1" CreationDate="2015-12-07T12:35:24.540" Score="2" ViewCount="159" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yykWz.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yykWz.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm unable to install elementary OS due to this resolution issue, does anyone know how I can fix it?&lt;/p&gt;&#xA;" OwnerUserId="3354" LastEditorUserId="37" LastEditDate="2015-12-09T09:02:08.080" LastActivityDate="2017-02-08T17:40:22.560" Title="Resolution Issue on install" Tags="|system-installation|display|resolution|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3409" PostTypeId="1" CreationDate="2015-12-07T15:15:11.500" Score="2" ViewCount="248" Body="&lt;p&gt;I installed elementary OS on my Dell inspiron {2.3GHz i3, 2GB Ram}. Everything worked great but running elementary os heats my pc too much causing lots of power consumption.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution for preventing from overheating. &lt;/p&gt;&#xA;" OwnerUserId="3330" LastEditorUserId="3757" LastEditDate="2016-05-06T09:03:38.523" LastActivityDate="2016-05-06T09:03:38.523" Title="elementary OS heats my Dell Inspiron too much" Tags="|overheat|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3410" PostTypeId="1" AcceptedAnswerId="3411" CreationDate="2015-12-07T17:55:59.483" Score="1" ViewCount="190" Body="&lt;p&gt;When I visit &lt;a href=&quot;https://soundcloud.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;SoundCloud&lt;/a&gt;, I get an error message that my browser isn't compatible with SoundCloud. What should I do to continue using Midori when opening SoundCloud?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rPqrk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rPqrk.png&quot; alt=&quot;Midori-Soundcloud&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastEditorUserId="45" LastEditDate="2015-12-07T20:00:09.367" LastActivityDate="2015-12-07T20:09:54.957" Title="Can I use SoundCloud with Midori?" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3411" PostTypeId="2" ParentId="3410" CreationDate="2015-12-07T19:47:34.913" Score="3" Body="&lt;p&gt;Try telling Midori to identify itself as Safari (or another supported browser):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the Menu (the gear icon in the top right)&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select the &quot;Network&quot; tab and choose &quot;Safari&quot; from the &quot;Identify As&quot; combobox.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qAo2Q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qAo2Q.png&quot; alt=&quot;Midori Network Preferences&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's &lt;a href=&quot;http://midori-browser.org/faqs/#why_does_google_mailcalendarmaps_facebook_not_work_or_show_mobile_version&quot; rel=&quot;nofollow noreferrer&quot;&gt;more info from the Midori FAQ&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="45" LastEditDate="2015-12-07T20:09:54.957" LastActivityDate="2015-12-07T20:09:54.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3412" PostTypeId="2" ParentId="3354" CreationDate="2015-12-07T20:04:33.080" Score="8" Body="&lt;p&gt;It is possible not to show the task list in the dock.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold &lt;kbd&gt;Control&lt;/kbd&gt; and right-click anywhere on the dock&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select the &quot;Behavior&quot; tab&lt;/li&gt;&#xA;&lt;li&gt;Under the heading &quot;Item Management&quot;, disable &quot;Show Unpinned&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Running, but unpinned items will no longer show in the dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be aware that dock items act as the minimize/unminimize mechanism. If you've modified your window decoration layout to include a minimize button, you'll no longer have an easy way to unminimize windows. However, minimized windows are still accessible from the multitasking view.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-12-09T19:56:53.573" LastActivityDate="2015-12-09T19:56:53.573" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3414" PostTypeId="2" ParentId="3409" CreationDate="2015-12-07T20:27:37.497" Score="3" Body="&lt;p&gt;There are some tools that you can use  to prevent overheating on your laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A good power management like TLP it's the first choice. To install from terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linrunner/tlp&#xA;sudo apt-get update &#xA;sudo apt-get install tlp tlp-rdw &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A tool to monitor and control the CPU temperature, like Thermald&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install termald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There are others tools like indicators (psensor, cpufreq, etc.) that you can install to better performance &lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="2708" LastEditDate="2015-12-08T09:16:50.460" LastActivityDate="2015-12-08T09:16:50.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3416" PostTypeId="1" CreationDate="2015-12-07T22:24:42.890" Score="1" ViewCount="361" Body="&lt;p&gt;There are some differences between a normal pc and a mac. This are the ones that obstruct me to make elementary os my main os. I know there are just details, but elementary is about details ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) The headphone jack has a red light. How can i turn it off?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Is there a way to set the keyboard backlight to turn off after a some amount of time?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) How can i switch the copy/paste keyboard shortcut to be cmd-c and cmd-p to have an experience more similar between os?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pd: sorry my bad english :$&lt;/p&gt;&#xA;" OwnerUserId="198" LastActivityDate="2015-12-07T22:24:42.890" Title="Setting up elementary os on macbook pro mid 2012" Tags="|release-freya|settings|keyboard-shortcuts|hardware|macbook|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-09T22:49:15.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="3417" PostTypeId="1" CreationDate="2015-12-07T22:31:24.277" Score="1" ViewCount="313" Body="&lt;p&gt;lspci -v:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller])&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 49&#xA;    Memory at f6000000 (64-bit, non-prefetchable) [size=16M]&#xA;    Memory at e0000000 (64-bit, prefetchable) [size=256M]&#xA;    I/O ports at f000 [size=64]&#xA;    Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: i915_bpo&#xA;&#xA;00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 51&#xA;    Memory at f721c000 (64-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;&#xA;00:04.0 Signal processing controller: Intel Corporation Broadwell-U Camarillo Device (rev 09)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Memory at f7210000 (64-bit, non-prefetchable) [size=32K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: proc_thermal&#xA;&#xA;00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])&#xA;    Subsystem: ASUSTeK Computer Inc. Device 201f&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 45&#xA;    Memory at f7200000 (64-bit, non-prefetchable) [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: xhci_hcd&#xA;&#xA;00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 48&#xA;    Memory at f7224000 (64-bit, non-prefetchable) [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: mei_me&#xA;&#xA;00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 32, IRQ 50&#xA;    Memory at f7218000 (64-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;&#xA;00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;&#xA;00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0&#xA;    I/O behind bridge: 0000e000-0000efff&#xA;    Memory behind bridge: f7100000-f71fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;&#xA;00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0&#xA;    Memory behind bridge: f7000000-f70fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;&#xA;00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, medium devsel, latency 0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: lpc_ich&#xA;&#xA;00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03) (prog-if 01 [AHCI 1.0])&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 46&#xA;    I/O ports at f0b0 [size=8]&#xA;    I/O ports at f0a0 [size=4]&#xA;    I/O ports at f090 [size=8]&#xA;    I/O ports at f080 [size=4]&#xA;    I/O ports at f060 [size=32]&#xA;    Memory at f7222000 (32-bit, non-prefetchable) [size=2K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ahci&#xA;&#xA;00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: medium devsel, IRQ 3&#xA;    Memory at f7221000 (64-bit, non-prefetchable) [size=256]&#xA;    I/O ports at f040 [size=32]&#xA;&#xA;00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 19ad&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 3&#xA;    Memory at f7220000 (64-bit, non-prefetchable) [size=4K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)&#xA;    Subsystem: ASUSTeK Computer Inc. Device 200f&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 47&#xA;    I/O ports at e000 [size=256]&#xA;    Memory at f7104000 (64-bit, non-prefetchable) [size=4K]&#xA;    Memory at f7100000 (64-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: r8169&#xA;&#xA;03:00.0 Network controller: MEDIATEK Corp. MT7630e 802.11bgn Wireless Network Adapter&#xA;    Subsystem: Foxconn International, Inc. Device e084&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 19&#xA;    Memory at f7000000 (32-bit, non-prefetchable) [size=1M]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: mt7630e&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;rfkill list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: asus-wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: asus-bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I go on the Bluetooth page in my system settings, I can click the switch button (it becomes blue) but below on the left column there is written &quot;Bluetooth is disabled&quot; and is greyed out. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci doesn't show any kinf of bluetooth device, but rfkill shows some sort of bluetooth device.. The bluetooth brand should be Mediatek, the box says this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Recently I found out that the bluetooth device is the Mediatek MT7630e, so it's the same as the Wi-Fi. I had problems with it initially, but then I found some drivers that fixed it. There is a folder called btloader in the driver's directory, which I suppose has to do with the bluetooth, but it's still not working. The Wi-Fi works like a charm on the other hand.&lt;/p&gt;&#xA;" OwnerUserId="1186" LastEditorUserId="1186" LastEditDate="2015-12-23T08:28:54.190" LastActivityDate="2017-10-07T13:39:47.770" Title="Bluetooth is disabled" Tags="|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3418" PostTypeId="1" CreationDate="2015-12-08T04:17:01.083" Score="0" ViewCount="336" Body="&lt;p&gt;The Lenovo ThinkCentre M73 Tiny has a 2.6GHz Pentium Dual Core (G3220T), Intel HD Graphics, 8 GB ram, 3 MB cache, Intel H81 Express Chipset, HD Audio Realtexk ALC283, Intel Centrino Wireless N 2230 + Bluetooth.  320 GB HD.  Currently running Windows 10.  It's small...about the size of a Mac Mini or a Chromebox etc.  I can pick this up used in excellent condition for a shade over $100.  Would this machine be adequate for Elementary?  More than just adequate?   Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3301" LastEditorUserId="3757" LastEditDate="2016-05-06T11:45:32.277" LastActivityDate="2016-05-06T11:45:32.277" Title="elementary OS on a Lenovo M73 Tiny" Tags="|lenovo|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3420" PostTypeId="2" ParentId="3418" CreationDate="2015-12-08T07:06:33.113" Score="2" Body="&lt;p&gt;I'm running Elementary an a low-spec HP laptop, and it runs at least as well as it did under Win8 (which I hated), and probably better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop has an AMD e1-2100 dual-core CPU and 8GB of RAM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below site compares the performance of the G3220T vs my e1-2100:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.cpu-world.com/Compare/235/AMD_E1-Series_E1-2100_vs_Intel_Pentium_Dual-Core_G3220T.html&quot; rel=&quot;nofollow&quot;&gt;http://www.cpu-world.com/Compare/235/AMD_E1-Series_E1-2100_vs_Intel_Pentium_Dual-Core_G3220T.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, that Intel chip way outperforms my AMD, so I would say you'll have no issues at all running Elementary on that Lenovo, and the elelentary.io website lists &lt;a href=&quot;http://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;recommended specs&lt;/a&gt; as &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;1 GHz 32-bit or 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Give it a go - as long as you're careful when installing, so you don't wipe Windows 10 until you're sure you don't want it, you've got nothing to lose :)&lt;/p&gt;&#xA;" OwnerUserId="3233" LastActivityDate="2015-12-08T07:06:33.113" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3422" PostTypeId="1" CreationDate="2015-12-08T12:04:23.340" Score="1" ViewCount="259" Body="&lt;p&gt;I just installed elementary os. Works perfect. Installed some updates and programs, hit restart and every thing works.&#xA;Installed the videocard drivers  (AMD hd 7850), moved all my music and photos to the pc. Hit restart and boot in to a black screen...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I hit the powerpoint button&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;bios loads&lt;/li&gt;&#xA;&lt;li&gt;elementary logo&lt;/li&gt;&#xA;&lt;li&gt;screen fills with white letters for couple off seconds&lt;/li&gt;&#xA;&lt;li&gt;black screen&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I can not get into the OS. But when I hit the powerpoint button again to shuttle it off I see the elementary logo again.&lt;/p&gt;&#xA;" OwnerUserId="3368" LastEditorUserId="3368" LastEditDate="2015-12-08T13:11:27.557" LastActivityDate="2015-12-08T15:08:34.073" Title="Booting to a black screen" Tags="|boot|graphic-drivers|drivers|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3424" PostTypeId="1" AcceptedAnswerId="3427" CreationDate="2015-12-08T13:57:41.240" Score="1" ViewCount="411" Body="&lt;p&gt;Don't know what went wrong my terminal window maximized to the screen &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QIaGS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QIaGS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3353" LastEditorUserId="3757" LastEditDate="2016-05-06T14:33:37.670" LastActivityDate="2016-05-06T14:33:37.670" Title="Terminal window get maximized" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-08T16:49:57.637" ContentLicense="CC BY-SA 3.0" />
  <row Id="3427" PostTypeId="2" ParentId="3424" CreationDate="2015-12-08T16:09:17.797" Score="1" Body="&lt;p&gt;To unmaximize use:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F5&lt;/kbd&gt; or &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Alt&lt;/kbd&gt; +&lt;kbd&gt;F10&lt;/kbd&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If none working:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Press&lt;/strong&gt; &lt;kbd&gt; F11&lt;/kbd&gt; without &lt;kbd&gt;Alt&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-08T16:42:15.797" LastActivityDate="2015-12-08T16:42:15.797" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3429" PostTypeId="1" AcceptedAnswerId="3430" CreationDate="2015-12-08T16:53:42.327" Score="1" ViewCount="336" Body="&lt;p&gt;I saw some other people having the same problem but none of them helped me to fix the problem. I want to change the languages (English and Greek) by clicking alt + shift. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried doing it by going on settings --&gt; Shortcuts --&gt; Universal Access but as many times as I clicked alt + shift it didn't worked. It works with other buttons, like enter, but not with alt + shift.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. Sorry for my English.&lt;/p&gt;&#xA;" OwnerUserId="3370" LastActivityDate="2015-12-08T17:35:27.827" Title="Can't change the shortcuts from keyboard layout" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3430" PostTypeId="2" ParentId="3429" CreationDate="2015-12-08T17:35:27.827" Score="1" Body="&lt;p&gt;It's a &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-keyboard/+bug/1444659&quot; rel=&quot;nofollow&quot;&gt;bug&lt;/a&gt;, but you can set &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt; shortcut by using terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;Shift_L', '&amp;lt;Alt&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Alt_L', '&amp;lt;Shift&amp;gt;Alt_R']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2015-12-08T17:35:27.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3432" PostTypeId="1" AcceptedAnswerId="3433" CreationDate="2015-12-09T03:47:16.447" Score="0" ViewCount="265" Body="&lt;p&gt;When I turn on my computer, the system shows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I press a key, it shows up again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem started after installing virtualbox. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tired to run boot repair, with no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is output of &lt;code&gt;sudo fdisk -l&lt;/code&gt; in live usb:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary@elementary:~$ sudo fdisk -l&#xA;&#xA;Disk /dev/sda: 4009 MB, 4009754624 bytes&#xA;126 heads, 22 sectors/track, 2825 cylinders, total 7831552 sectors&#xA;Units = sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 512 bytes&#xA;I/O size (minimum/optimal): 512 bytes / 512 bytes&#xA;Disk identifier: 0x0005f247&#xA;&#xA;  Device Boot      Start         End      Blocks   Id  System&#xA;  /dev/sda1   *        2048     7831551     3914752    c  W95 FAT32 (LBA)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T03:47:16.447" Title="Reboot and Select proper Boot device" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3433" PostTypeId="2" ParentId="3432" CreationDate="2015-12-09T03:47:16.447" Score="0" Body="&lt;p&gt;It seems the HDD is not connected properly or SATA cable is damaged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to get rid of the error after changing SATA cable that was connected to the HDD. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T03:47:16.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3435" PostTypeId="1" AcceptedAnswerId="3572" CreationDate="2015-12-09T08:52:42.750" Score="3" ViewCount="3827" Body="&lt;p&gt;After changing my desktop background using a custom image, my desktop stays black, while the login screen has been reverted to the default image. How can I fix that (without copying the image to /usr/share/backgrounds)?&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2015-12-16T16:18:56.837" Title="Black desktop background" Tags="|greeter|wallpaper|" AnswerCount="4" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3436" PostTypeId="1" CreationDate="2015-12-09T08:57:33.770" Score="1" ViewCount="261" Body="&lt;p&gt;When I try to select a new desktop background, only a few images are displayed, but I can select also images which are not displayed. If I move the system settings window around, then sometimes some more pictures show up, but only randomly. How can I see all?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to describe it further: Usually all available pictures are displayed in the background selection window. But at the moment only the first five images are displayed, the rest not. Nevertheless I can still select them.&lt;br&gt;&#xA;If I move the system settings window around (with the mouse), sometimes other images show up, but randomly.&lt;br&gt;&#xA;The background selection window (including missing pictures) is shown below:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lgLFe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lgLFe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Output from &lt;code&gt;dir /usr/share/backgrounds&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;164.jpg           elementaryos-default         Paris\ la\ Tour\ Eiffel.jpg&#xA;168.jpg           elementaryos-default_bak     Ryan\ Schroeder.jpg&#xA;16.jpg            elementaryos-default.jpg     The\ Coast.jpg&#xA;173.jpg           Horseshoe\ Bend\ Sunset.jpg  Tunnel.jpg&#xA;2.jpg             Jonas\ Nilsson\ Lee.jpg      Urban\ Dream.jpg&#xA;94.jpg            Lake\ Tahoe\ Colors.jpg      Water\ Lily.jpg&#xA;black_flower.jpg  Leaves.jpg                   Wild\ Night.jpg&#xA;Blueprint.jpg     Living\ Stones.jpg&#xA;Droplet.jpg       Mr.\ Lee.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="310" LastEditorUserId="310" LastEditDate="2015-12-09T15:47:36.410" LastActivityDate="2015-12-17T17:25:28.173" Title="Images are not displayed in background selection" Tags="|wallpaper|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3437" PostTypeId="1" AcceptedAnswerId="3444" CreationDate="2015-12-09T09:13:31.793" Score="0" ViewCount="2000" Body="&lt;p&gt;I need to use  Atlassian SourceTree on my Freya. I am using it for Github and Bitbucket git management. I am not sure its available in &lt;code&gt;.deb&lt;/code&gt; versions. So I don't know, how to install it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I install SourceTree inside Freya?.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, please guide me to install it. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="37" LastEditDate="2015-12-09T09:57:05.790" LastActivityDate="2015-12-09T12:49:04.120" Title="How to install Atlassian SourceTree in Freya?" Tags="|release-freya|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3438" PostTypeId="1" AcceptedAnswerId="3440" CreationDate="2015-12-09T09:49:48.917" Score="1" ViewCount="269" Body="&lt;p&gt;How to change the color of texts in the scratch default text editor. It looks grey, and few other colors. I want to change it like dark black and red, blue like need to change few color schemes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any settings to change the color schemes. ?&lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-12-09T10:33:01.260" Title="How to change Text Color in Scratch Freya built in text editor?" Tags="|release-freya|code|color-format|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3439" PostTypeId="2" ParentId="3437" CreationDate="2015-12-09T09:55:50.790" Score="1" Body="&lt;p&gt;SourceTree from Atlassian is only available for Windows and Mac and not Linux.&#xA;You can express the desire for a linux version here &#xA;&lt;a href=&quot;https://answers.atlassian.com/questions/149631/sourcetree-for-linux&quot; rel=&quot;nofollow&quot;&gt;https://answers.atlassian.com/questions/149631/sourcetree-for-linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2015-12-09T09:55:50.790" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3440" PostTypeId="2" ParentId="3438" CreationDate="2015-12-09T10:12:22.990" Score="2" Body="&lt;p&gt;You can set a different style scheme in &lt;code&gt;org.pantheon.scratch.settings.style-scheme&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See this link for how to edit a setting in dconf &lt;a href=&quot;https://elementaryos.stackexchange.com/a/176/37&quot;&gt;https://elementaryos.stackexchange.com/a/176/37&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Schemes are located in &lt;code&gt;/usr/share/gtksourceview-3.0/styles&lt;/code&gt;&#xA;and the preinstalled schemes are &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;solarized-light (default)&lt;/li&gt;&#xA;&lt;li&gt;classic&lt;/li&gt;&#xA;&lt;li&gt;kate&lt;/li&gt;&#xA;&lt;li&gt;solarized-dark&lt;/li&gt;&#xA;&lt;li&gt;cobalt&lt;/li&gt;&#xA;&lt;li&gt;oblivion&lt;/li&gt;&#xA;&lt;li&gt;tango&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Here are more style-schemes listed &lt;a href=&quot;https://wiki.gnome.org/Projects/GtkSourceView/StyleSchemes&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Projects/GtkSourceView/StyleSchemes&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-12-09T10:33:01.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3441" PostTypeId="1" AcceptedAnswerId="3442" CreationDate="2015-12-09T10:37:44.933" Score="1" ViewCount="7724" Body="&lt;p&gt;Can I change the Freya font to my desired one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the easiest way to change my fonts? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I get google web-fonts or some professionally simple fonts.I am really happy to use it .&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="2708" LastEditDate="2015-12-09T13:23:13.723" LastActivityDate="2015-12-09T13:55:21.890" Title="How can I change fonts and adjust their size in elementary OS" Tags="|release-freya|fonts|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3442" PostTypeId="2" ParentId="3441" CreationDate="2015-12-09T11:20:49.760" Score="0" Body="&lt;p&gt;Yes, you can change system fonts using Elementary Tweaks:&#xA;&lt;a href=&quot;https://launchpad.net/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/elementary-tweaks&lt;/a&gt;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Wtk0N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Wtk0N.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2633" LastActivityDate="2015-12-09T11:20:49.760" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3443" PostTypeId="2" ParentId="3435" CreationDate="2015-12-09T12:29:50.577" Score="3" Body="&lt;p&gt;Use &lt;code&gt;dconf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install dconf with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;dconf&lt;/code&gt; org --&gt; gnome --&gt; desktop --&gt; background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change picture uri. (total path of image)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/H8SMy.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not working:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset-recursively org.gnome.desktop.background&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now try again to change the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command form to change background is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///home/thepathtoyourfile/yourNewBackgroundFile.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T12:29:50.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3444" PostTypeId="2" ParentId="3437" CreationDate="2015-12-09T12:49:04.120" Score="1" Body="&lt;p&gt;SourceTree isn't available for Linux (yet?). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some alternatives that you can find in the Git official site: &lt;a href=&quot;https://git-scm.com/downloads/guis&quot; rel=&quot;nofollow&quot;&gt;https://git-scm.com/downloads/guis&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-12-09T12:49:04.120" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3445" PostTypeId="2" ParentId="3441" CreationDate="2015-12-09T13:13:29.237" Score="0" Body="&lt;p&gt;Install &lt;code&gt;gnome-tweak-tool&lt;/code&gt; from software center. There you can change fonts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/fT942.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T13:13:29.237" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3446" PostTypeId="2" ParentId="3435" CreationDate="2015-12-09T13:18:48.273" Score="0" Body="&lt;p&gt;You can use &lt;code&gt;gnome-tweak-tool&lt;/code&gt; to change background:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software center,then open it. You can change background under Desktop tab&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/3EfpO.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T13:18:48.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3447" PostTypeId="2" ParentId="3441" CreationDate="2015-12-09T13:55:21.890" Score="0" Body="&lt;p&gt;Install &lt;code&gt;font-manager&lt;/code&gt; from software center, there you can change fonts:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/OLzFk.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From manage fonts option you can install fonts as well.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T13:55:21.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3448" PostTypeId="2" ParentId="3435" CreationDate="2015-12-09T14:36:43.740" Score="0" Body="&lt;p&gt;You can use &lt;code&gt;wallch&lt;/code&gt;. Install it from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wallch is a General purpose Wallpaper Changer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can shuffle background after a predefined time interval. Browse to the location, import. Now right click on it for options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mv4Wq.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-09T14:36:43.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3449" PostTypeId="2" ParentId="3436" CreationDate="2015-12-09T15:57:26.737" Score="1" Body="&lt;p&gt;Open terminal and run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-wallpapers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can reinstall from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not working, update to &lt;em&gt;0.3.2&lt;/em&gt; would solve the issue.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-16T16:21:22.443" LastActivityDate="2015-12-16T16:21:22.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3450" PostTypeId="1" CreationDate="2015-12-09T16:26:35.117" Score="1" ViewCount="69" Body="&lt;p&gt;The &lt;kbd&gt;Set as Desktop Background&lt;/kbd&gt; option is missing. It was available after installation but now this has disappeared...?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why has this happened and how can we get this pre-installed feature back...?&lt;/p&gt;&#xA;" OwnerUserId="3353" LastEditorUserId="26" LastEditDate="2015-12-10T00:03:50.897" LastActivityDate="2015-12-10T00:04:02.750" Title="Set as Desktop Background is missing" Tags="|system|" AnswerCount="1" CommentCount="3" ClosedDate="2015-12-15T23:31:28.453" ContentLicense="CC BY-SA 3.0" />
  <row Id="3451" PostTypeId="1" AcceptedAnswerId="3655" CreationDate="2015-12-09T16:32:53.717" Score="4" ViewCount="1828" Body="&lt;p&gt;What will happen if I use gnome tweak tool in elementary OS? Does it break my system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Please explain in detail&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, can I use this &lt;code&gt;gnome-tweak&lt;/code&gt; tool for changing &lt;code&gt;fonts&lt;/code&gt;, &lt;code&gt;backgrounds&lt;/code&gt; etc., or should I &lt;em&gt;ban&lt;/em&gt; it in elementary  &lt;em&gt;completely&lt;/em&gt;?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-11T01:59:12.343" LastActivityDate="2017-01-09T20:03:07.157" Title="What are the consequences of using gnome tweak tools on elementary" Tags="|release-freya|tweak-tool|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3452" PostTypeId="1" CreationDate="2015-12-09T17:03:40.970" Score="1" ViewCount="258" Body="&lt;p&gt;After the last update and rebooting a Grub screen showed. Totally new, as I have elementary OS as my main and sole OS. The options it gives are -elementary OS -Advance Options for elementary OS, which gives some different Linux kernels (5 differents kernel options). Choosing any always leads to &lt;code&gt;[   1.689766] ACPI PCC probe failed.&lt;/code&gt;&#xA;And then to something called BusyBox v.1.21.1. The OS does never load, before formating, and re-installing it again (because I love this linux flavour) and losing all my music and videos, well, i'd like to know if there's something I can do to fix it, if broken.&lt;/p&gt;&#xA;" OwnerUserId="3379" LastEditorUserId="37" LastEditDate="2015-12-10T09:12:52.323" LastActivityDate="2015-12-10T09:12:52.323" Title="elementary OS does not boot after 0.3.2 update" Tags="|boot|system|grub|updates|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3453" PostTypeId="2" ParentId="1319" CreationDate="2015-12-09T17:21:59.730" Score="3" Body="&lt;p&gt;First, press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt;, then press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F7&lt;/kbd&gt; and then take a screenshot.&lt;/p&gt;&#xA;" OwnerUserId="3380" LastEditorUserId="37" LastEditDate="2015-12-09T20:23:00.087" LastActivityDate="2015-12-09T20:23:00.087" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3454" PostTypeId="2" ParentId="3062" CreationDate="2015-12-09T17:30:16.867" Score="1" Body="&lt;p&gt;You should have these icons in the current icon theme folder (&lt;code&gt;actions/16&lt;/code&gt;):&#xA;&lt;code&gt;package-install&lt;/code&gt;,&lt;code&gt;package-installed-locked&lt;/code&gt;, &lt;code&gt;package-installed-outdated&lt;/code&gt; &amp;amp; &lt;code&gt;package-installed-updated&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the default installed ones for Humanity &amp;amp; elementary theme.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/icons/Humanity/actions/16/package-install.svg&#xA;/usr/share/icons/Humanity/actions/16/package-installed-locked.svg&#xA;/usr/share/icons/Humanity/actions/16/package-installed-outdated.svg&#xA;/usr/share/icons/Humanity/actions/16/package-installed-updated.svg&#xA;/usr/share/icons/elementary/actions/16/package-install.svg&#xA;/usr/share/icons/elementary/actions/16/package-installed-locked.svg&#xA;/usr/share/icons/elementary/actions/16/package-installed-outdated.svg&#xA;/usr/share/icons/elementary/actions/16/package-installed-updated.svg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So check if they exist then reinstall both themes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall humanity-icon-theme elementary-icon-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I you are using a custom theme, copy them to its folder &lt;code&gt;/usr/share/icons/&amp;lt;theme-name&amp;gt;/actions/16/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;How i found this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;software-center&lt;/code&gt; is programmed in python (script). It can easily modified for debug. So added a line just before the trouble line (#199) to print the requested icon name.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    for i, emblem in enumerate(emblem_names):&#xA;        print(&quot;emblem:&quot;,emblem)&#xA;        pb = icons.load_icon(emblem, self.ICON_SIZE, 0)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Output on launching it in terminal: (NB: this is from a working copy)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;('emblem:', 'package-install')&#xA;('emblem:', 'package-remove')&#xA;('emblem:', 'package-upgrade')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2015-12-09T17:30:16.867" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3458" PostTypeId="2" ParentId="3450" CreationDate="2015-12-09T23:57:01.207" Score="3" Body="&lt;h1&gt;Update&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;An update has been released to address this issue within Freya. If you are running Freya, please update. If you are not yet running Freya, please upgrade.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2015-12-10T00:04:02.750" LastActivityDate="2015-12-10T00:04:02.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3460" PostTypeId="1" CreationDate="2015-12-10T00:19:35.193" Score="1" ViewCount="83" Body="&lt;p&gt;I just installed elementary and every-time that I start my computer I have a black screen after the BIOS. It's as if there is another monitor plugged in and it showing it on that one (I only have 2). I have an AMD graphics card and it is detected by the OS. My only fix so far is unplugging and replugging my video cords. Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="3385" LastEditorUserId="2708" LastEditDate="2015-12-30T09:13:34.950" LastActivityDate="2015-12-30T09:13:34.950" Title="Black Screen after fresh install" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3462" PostTypeId="1" AcceptedAnswerId="3479" CreationDate="2015-12-10T04:39:35.570" Score="2" ViewCount="131" Body="&lt;p&gt;In plank preferences there is an option: Automatic Pinning&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How does it work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I enabled and disabled the option but failed to identify any difference.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2015-12-10T18:33:35.730" LastActivityDate="2016-01-14T22:29:39.770" Title="What is&quot; automatic pinning&quot;, and how does it work?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3463" PostTypeId="1" AcceptedAnswerId="3464" CreationDate="2015-12-10T05:17:25.983" Score="4" ViewCount="1366" Body="&lt;p&gt;I have found a link to change default terminal font size:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;+&lt;/kbd&gt; is not working for me to increase font size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any keyboard shortcut to increase and decrease?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-10T05:29:30.870" LastActivityDate="2017-05-19T00:37:41.687" Title="Shortcut to change the pantheon-terminal font size" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3464" PostTypeId="2" ParentId="3463" CreationDate="2015-12-10T05:17:25.983" Score="5" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt; Ctrl&lt;/kbd&gt; + &lt;kbd&gt;+&lt;/kbd&gt; for &lt;strong&gt;increasing&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;-&lt;/kbd&gt; for &lt;strong&gt;decreasing&lt;/strong&gt; font size.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-10T05:17:25.983" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3465" PostTypeId="1" CreationDate="2015-12-10T05:31:04.923" Score="1" ViewCount="239" Body="&lt;p&gt;Using 0.3.2, acpi=off, and nomodeset flags I was able to single boot elementary OS from USB and successfully install. I haven't been able to successfully restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When restarting I'm dropped into grub. I've attempted the fix found in another &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;popular thread&lt;/a&gt; of entering &lt;code&gt;configfile (hd0,gpt2)/grub/grub.cfg&lt;/code&gt; and then loading elementary OS. I've tried loading elementary OS with and without acpi=off and nomodeset flags after the &lt;code&gt;splash&lt;/code&gt; flag.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I reboot elementary OS in this situation?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Referenced Question: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1&lt;/a&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I noticed that in the thread the fix is under the /boot namespace. Could it be an issue that I don't have /boot in grub?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: It may be relevant that I chose to encrypt my installation disk and opted for LVM - logical volume management.&lt;/p&gt;&#xA;" OwnerUserId="3375" LastEditorUserId="34" LastEditDate="2015-12-10T11:17:00.900" LastActivityDate="2015-12-11T08:14:22.790" Title="How do I boot elementary OS 0.3.2 after initial install?" Tags="|system-installation|grub|usb-drive|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-20T21:13:17.223" ContentLicense="CC BY-SA 3.0" />
  <row Id="3466" PostTypeId="1" AcceptedAnswerId="3473" CreationDate="2015-12-10T05:56:10.153" Score="3" ViewCount="1215" Body="&lt;p&gt;I downloaded and installed Neatbeans 8.1 from the official site. Even if I tick &lt;strong&gt;Keep in Dock&lt;/strong&gt; for the Netbeans icon, a new icon is generated every time I click on it. This new icon doesn't have the option to &lt;strong&gt;Keep in Dock&lt;/strong&gt;, only &lt;strong&gt;Close&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I googled a bit and came to know about .desktop files in /usr/share/applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is no .desktop file for netbeans!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I copied the .desktop file from &lt;code&gt;~/.local/share/applications&lt;/code&gt; to &lt;code&gt;/usr/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess the only problem remaining is figuring out the WM_CLASS of Netbeans 8.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I run this command:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;xprop WM_CLASS&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;as suggested in the other question, it returns &lt;strong&gt;WM_CLASS: not found&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how to find that out?&lt;/p&gt;&#xA;" OwnerUserId="3387" LastEditorUserId="2708" LastEditDate="2015-12-10T10:14:53.310" LastActivityDate="2015-12-10T10:14:53.310" Title="How to fix Netbeans 8.1 double icons on plank" Tags="|plank|icons|" AnswerCount="1" CommentCount="1" ClosedDate="2015-12-10T14:19:46.233" ContentLicense="CC BY-SA 3.0" />
  <row Id="3467" PostTypeId="1" CreationDate="2015-12-10T06:12:15.887" Score="1" ViewCount="260" Body="&lt;p&gt;I created a bootable USB for elementary OS 0.3.1. As you know, 0.3.1 brings some Grub problems, so I want to update to 0.3.2. But guess what? I can't use my USB at all. I created the bootable USB with &quot;Create elementary OS Installer&quot; for Mac. I'm running OSX El Capitan. How can I format my USB?&lt;/p&gt;&#xA;" OwnerUserId="3389" LastEditorUserId="37" LastEditDate="2015-12-10T09:13:48.873" LastActivityDate="2015-12-11T03:32:21.487" Title="Re-formatting bootable USB in Mac" Tags="|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3468" PostTypeId="1" CreationDate="2015-12-10T06:30:53.763" Score="1" ViewCount="329" Body="&lt;p&gt;I am using elementary OS freya &lt;em&gt;0.3.2&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As the title says, Is it possible to continue playing music even system gets locked for inactivity? In Ubuntu, system continue to play music after it was locked. But in elementary its not working (atleast for me). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to make the system continue to play music even it is suspended for inactivity. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2019-05-11T09:13:07.597" Title="Is it possible to continue playing music even system gets locked for inactivity?" Tags="|release-freya|greeter|music|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3470" PostTypeId="1" AcceptedAnswerId="3471" CreationDate="2015-12-10T09:11:32.667" Score="1" ViewCount="929" Body="&lt;p&gt;I have unknown notification in my Notifications. I have all the necessary notifications like, Network, Power, terminal, Music, Geary, thunderbird etc.,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I remove it from Notifications menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ngAf9.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-10T14:54:24.773" Title="Unknown application in notifications" Tags="|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3471" PostTypeId="2" ParentId="3470" CreationDate="2015-12-10T09:11:32.667" Score="1" Body="&lt;p&gt;I was able to remove it by using &lt;code&gt;dconf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor #to install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;dconf-editor&lt;/code&gt; --&gt; org --&gt; pantheon --&gt; gala --&gt; notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you will see: &lt;strong&gt;apps&lt;/strong&gt; the corresponding value should have entries like: &lt;code&gt;'appname:show,on'&lt;/code&gt;. But you will see an entry without &lt;code&gt;appname&lt;/code&gt; like just &lt;code&gt;':show,on'&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(The actual syntax is :&lt;code&gt;['{APP-NAME}:{PRIORITY (show/hide)},{SOUNDS on/off}', ...]&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Remove it, it will remove the unknow notification icon&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/HhQub.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After removing &lt;code&gt;':show,on'&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/F3kSB.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can make the notifications to default by clicking &lt;kbd&gt;Set to Default&lt;/kbd&gt; in &lt;code&gt;dconf&lt;/code&gt; (See screenshot above).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Using terminal&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.pantheon.desktop.gala.notifications apps&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It  gives the &lt;strong&gt;similar&lt;/strong&gt; output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;['NetworkManager:show,on', 'Power:show,on', 'terminal:show,on', 'guake!:show,on', 'org.pantheon.noise:show,on', 'vlc:show,on', 'vlc media player:show,on', 'xneur:show,on', ':show,on', 'thunderbird:show,on', 'geary:show,on']&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will see &lt;em&gt;&lt;code&gt;':show,on'&lt;/code&gt;&lt;/em&gt; in the output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.notifications apps &quot;[]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Inside the [], copy paste the above output except &lt;code&gt;':show,on'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.notifications apps &quot;['NetworkManager:show,on', 'Power:show,on', 'terminal:show,on', 'guake\!:show,on', 'org.pantheon.noise:show,on', 'vlc:show,on', 'vlc media player:show,on', 'xneur:show,on', 'thunderbird:show,on', 'geary:show,on']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: I have used &lt;code&gt;\&lt;/code&gt; before &lt;code&gt;!&lt;/code&gt; as escape sequence in the example.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-10T14:54:24.773" LastActivityDate="2015-12-10T14:54:24.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3473" PostTypeId="2" ParentId="3466" CreationDate="2015-12-10T09:56:22.173" Score="3" Body="&lt;p&gt;Try &lt;code&gt;StartupWMClass=NetBeans IDE 8.1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://netbeans.org/bugzilla/show_bug.cgi?id=183739&quot; rel=&quot;nofollow&quot;&gt;Source.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-12-10T09:56:22.173" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3474" PostTypeId="1" CreationDate="2015-12-10T10:43:28.273" Score="0" ViewCount="47" Body="&lt;p&gt;I dont want to use Bluetooth.  Which i feel slow to transfer. I wan to share my files from Freya to windows. And just like we can do in Ubuntu.I need to share files through wifi or LAN. Any idea to create file sharing like we do in ubuntu and windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/107208/how-to-transfer-files-between-ubuntu-and-windows&quot;&gt;Ubuntu windows Files Sharing&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-10T10:43:28.273" Title="How to transfer files between Freya and Windows?" Tags="|release-freya|networking|shared-libraries|" AnswerCount="0" CommentCount="4" ClosedDate="2015-12-15T23:35:19.257" ContentLicense="CC BY-SA 3.0" />
  <row Id="3475" PostTypeId="2" ParentId="3468" CreationDate="2015-12-10T11:10:00.870" Score="1" Body="&lt;p&gt;What worked for me was adding my user into the 'audio' group.  This isn't necessarily a good idea for the reasons listed &lt;a href=&quot;https://wiki.ubuntu.com/Audio/TheAudioGroup?highlight=%28audio%29&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, but for a single user system shouldn't be problematic. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -a -G audio myusername&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3327" LastActivityDate="2015-12-10T11:10:00.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3477" PostTypeId="1" CreationDate="2015-12-10T15:58:07.140" Score="1" ViewCount="71" Body="&lt;p&gt;I am using elementary OS freya &lt;em&gt;0.3.2&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/nrFAe.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As shown in the screenshot, I have a common partition (&lt;code&gt;data&lt;/code&gt; in ntfs) for all my OSes.When I right-click on the partition, it has &lt;code&gt;Empty Trash&lt;/code&gt; option, which is not available for remaining partitions. Why?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when I click on that option, some files are added to Trash which are not listed via terminal in &lt;code&gt;~/.local/share/Trash&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-10T15:58:07.140" Title="What is &quot;Empty Trash&quot; option in shared partition" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3478" PostTypeId="1" CreationDate="2015-12-10T17:38:10.610" Score="4" ViewCount="288" Body="&lt;p&gt;Files are displaying the time in 12 hours format (without AM/PM) when I set my language to English and local settings to Croatian. &#xA;For example I just created a file it should display 18:33 or 6:33PM insted it shows 12hrs format. Date is displayed fine. Is this a known bug or is it just me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zTTtL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zTTtL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3398" LastActivityDate="2015-12-14T14:38:12.613" Title="Date/Time settings in Files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3479" PostTypeId="2" ParentId="3462" CreationDate="2015-12-10T18:28:34.730" Score="3" Body="&lt;p&gt;Automatically pinning is a feature where Plank will pin items when you move an item that is not currently pinned. For example if you open Files, its icon will appear in the dock temporarily and be removed when you close it. However if you move the icon in the dock to another position, it will now be pinned and stay in the dock even when the app is no longer running.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-01-14T22:29:39.770" LastActivityDate="2016-01-14T22:29:39.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3481" PostTypeId="1" CreationDate="2015-12-10T21:47:36.980" Score="-1" ViewCount="96" Body="&lt;p&gt;I created USB Boot Media with two different methods. Both didn't work.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&quot;Create elementary OS Installer.app&quot; with &quot;elementaryos-0.3.2-stable-amd64.20151209.iso&quot;&#xA;This USB Drive doesn't boot on MBP2015 Retina (Not available at Bootprompt)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&quot;unetbootin.app&quot; with &quot;elementaryos-0.3.2-stable-amd64.20151209.iso&quot;&#xA;This drive boots but Dialog Windows appear only a quarter. Rest of the Dialog Windows is Outside the Screen. So no Installation is possible&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3401" LastEditorUserId="3406" LastEditDate="2015-12-11T15:15:50.743" LastActivityDate="2015-12-11T21:50:22.300" Title="Installation impossible on MBP2015" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2015-12-15T23:30:48.367" ContentLicense="CC BY-SA 3.0" />
  <row Id="3482" PostTypeId="2" ParentId="3465" CreationDate="2015-12-11T02:19:55.980" Score="-1" Body="&lt;p&gt;you probably want to try &lt;/p&gt;&#xA;&#xA;&lt;p&gt;configfile (hd0,gpt2)/efi/grub/grub.cfg instead&lt;/p&gt;&#xA;&#xA;&lt;p&gt;have a good one... i still havent found a permanent fix :*(&lt;/p&gt;&#xA;" OwnerUserId="3403" LastActivityDate="2015-12-11T02:19:55.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3483" PostTypeId="1" CreationDate="2015-12-11T02:24:22.800" Score="1" ViewCount="358" Body="&lt;p&gt;Just installed the newest elementary os on my asus ux305, and all the fn keys but the brightness dont, i already tried every solution i found on the internet with no positive solution. &lt;/p&gt;&#xA;" OwnerUserId="3404" LastActivityDate="2016-02-11T13:14:42.150" Title="Brightness keys (fn5 and fn6) not working" Tags="|keyboard|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3484" PostTypeId="1" CreationDate="2015-12-11T03:16:45.630" Score="2" ViewCount="1159" Body="&lt;p&gt;How to add login sound in elementary OS&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;default sounds in &lt;code&gt;/usr/share/sounds&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;custom sounds&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-20T01:42:03.993" Title="How to add login sound in elementary OS" Tags="|greeter|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3485" PostTypeId="2" ParentId="3467" CreationDate="2015-12-11T03:32:21.487" Score="2" Body="&lt;p&gt;I'm the author of that app. I've updated the app with a new build in tool for restoring USB drives on El Capitan. You can download the latest version &lt;a href=&quot;https://github.com/linusbobcat/create-elementary-os-installer/releases&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3405" LastActivityDate="2015-12-11T03:32:21.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3487" PostTypeId="2" ParentId="3465" CreationDate="2015-12-11T08:14:22.790" Score="-1" Body="&lt;ol&gt;&#xA;&lt;li&gt;configfile (hd0,gpt2)/efi/grub/grub.cfg&lt;/li&gt;&#xA;&lt;li&gt;boot in recovery mode under advanced settings in GRUB&lt;/li&gt;&#xA;&lt;li&gt;install nvidia graphic card drivers&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now when I restart or power on it boots cleanly through to elementary OS. Thanks for your help cedric!&lt;/p&gt;&#xA;" OwnerUserId="3375" LastActivityDate="2015-12-11T08:14:22.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3488" PostTypeId="1" AcceptedAnswerId="3490" CreationDate="2015-12-11T09:29:20.297" Score="0" ViewCount="4146" Body="&lt;p&gt;I have no clues to search and get file through the file manager. Any idea how to search file in it, Also sometimes I need to search a list of files with certain extension. we can do it like this in windows &quot;*.txt&quot; .But how about Freya. can we do it like this  ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here is my window screenshot, where can I get search option here in it&lt;a href=&quot;https://i.stack.imgur.com/ghSol.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ghSol.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I need to search in directory and its sub directory, it should get all the names in the any depth sub folders.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also I want to search with file extensions like if i type &quot;*.txt &quot; it should get all the files ends with same extensions. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2015-12-11T09:49:48.710" LastActivityDate="2015-12-11T09:55:38.677" Title="How to search a file in Freya?" Tags="|release-freya|search|" AnswerCount="1" CommentCount="6" ClosedDate="2015-12-11T10:56:28.657" ContentLicense="CC BY-SA 3.0" />
  <row Id="3489" PostTypeId="1" AcceptedAnswerId="3491" CreationDate="2015-12-11T09:36:37.800" Score="0" ViewCount="1620" Body="&lt;p&gt;Recently I installed istanbul Screen recorder from Software center. But its not working for me. even many commented there its not opening. So someone suggest me good screen recorder and good to use it on Freya&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ihe5c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ihe5c.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2015-12-11T10:06:21.873" LastActivityDate="2021-01-04T01:54:29.490" Title="Screen Recorder for Freya" Tags="|release-freya|screenshot|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3490" PostTypeId="2" ParentId="3488" CreationDate="2015-12-11T09:43:21.080" Score="1" Body="&lt;p&gt;You can directly search for &lt;code&gt;file/folder&lt;/code&gt; in current directory by typing name of the file you want. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want any specific tool for thispurpose: use &lt;code&gt;gnome-search-tool&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-search-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now open and search.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/GSZrc.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can modify search using &lt;code&gt;select more options&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your second requirement: Here &lt;code&gt;data&lt;/code&gt; is my &lt;strong&gt;partition&lt;/strong&gt;, the search listed all files ends with &lt;code&gt;.mp3&lt;/code&gt; in folders/sub-folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uL2cm.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-11T09:55:38.677" LastActivityDate="2015-12-11T09:55:38.677" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3491" PostTypeId="2" ParentId="3489" CreationDate="2015-12-11T10:11:42.160" Score="2" Body="&lt;p&gt;You can use &lt;a href=&quot;https://launchpad.net/kazam&quot; rel=&quot;nofollow&quot;&gt;kazam&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software center.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-11T10:11:42.160" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3492" PostTypeId="2" ParentId="3489" CreationDate="2015-12-11T10:19:21.647" Score="1" Body="&lt;p&gt;You may also use &lt;a href=&quot;https://web.archive.org/web/20180611034812/https://github.com/vkohaupt/vokoscreen&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vokoscreen&lt;/a&gt; (screenshots included on GitHub page).&lt;/p&gt;&#xA;&lt;p&gt;Install from software center&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y0iOU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y0iOU.png&quot; alt=&quot;img&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;" OwnerUserId="2708" LastEditorUserId="8517" LastEditDate="2021-01-04T01:54:29.490" LastActivityDate="2021-01-04T01:54:29.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="3493" PostTypeId="1" CreationDate="2015-12-11T00:45:29.340" Score="0" ViewCount="62" Body="&lt;p&gt;I recently switched from Windows 7 to elementary OS. I copied my important files from my Local Disk C to Local Disk D. I installed elementary OS in Local Disk C. After that I wanted to restore my Local Disk D files to Local Disk C in the root of my elementary partition but whenever I try to copy, it says that:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The folder &quot;&quot; cannot be copied because you do not have permissions to create it in the destination.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I'm new to Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsblk&lt;/code&gt; result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT&#xA;sda      8:0    0 465.8G  0 disk &#xA;├─sda1   8:1    0 236.7G  0 part /&#xA;├─sda3   8:3    0 221.6G  0 part /media/trebz/36902D4A902D11C3&#xA;├─sda4   8:4    0     1K  0 part &#xA;└─sda5   8:5    0   7.5G  0 part [SWAP]&#xA;sr0     11:0    1  1024M  0 rom &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm going to copy it to sda1 from sda3. So I successfully copied it to my home directory but I want it in my file system drive.  &lt;/p&gt;&#xA;" OwnerUserId="3402" OwnerDisplayName="treblaluch" LastEditorUserId="5565" LastEditDate="2016-10-05T21:06:25.080" LastActivityDate="2016-10-05T21:06:25.080" Title="How to copy old files in old partition to primary partition?" Tags="|file-management|permissions|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="3494" PostTypeId="2" ParentId="3493" CreationDate="2015-12-11T02:04:36.283" Score="1" Body="&lt;p&gt;On elementary OS, and every other linux, and every other Unix. Files are organized in a special directory structure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type &lt;code&gt;man hier&lt;/code&gt; or ask &lt;a href=&quot;https://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wikipedia&lt;/a&gt; or look at &lt;a href=&quot;https://askubuntu.com/questions/138547/how-to-understand-the-ubuntu-file-system-layout&quot;&gt;this question&lt;/a&gt; to learn about this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On windows you would not try to put your files under &lt;code&gt;C:\windows\&lt;/code&gt;. The same way you would not put your files under &lt;code&gt;/&lt;/code&gt;(the root directory) on linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On linux it is your home directory where your files live and where you have the right to do pretty much anything. Most of the other directories are system directories and you do not have permissions to write there.&lt;/p&gt;&#xA;" OwnerDisplayName="michas" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-11T02:21:43.853" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3495" PostTypeId="2" ParentId="3489" CreationDate="2015-12-11T10:29:49.320" Score="0" Body="&lt;p&gt;You can use &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/gtk-recordmydesktop/&quot; rel=&quot;nofollow&quot;&gt;recordMyDesktop&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://screenshots.debian.net/screenshots/g/gtk-recordmydesktop/2274_large.png&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-11T10:29:49.320" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3496" PostTypeId="1" AcceptedAnswerId="3515" CreationDate="2015-12-11T10:32:45.240" Score="1" ViewCount="215" Body="&lt;p&gt;I want to remove default Screenshot App from Freya. How can I remove it. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="2708" LastEditDate="2015-12-11T12:54:47.103" LastActivityDate="2015-12-12T01:46:47.267" Title="How can I remove default &quot;Screenshot&quot; app from Freya" Tags="|release-freya|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3497" PostTypeId="1" CreationDate="2015-12-11T11:35:53.087" Score="0" ViewCount="210" Body="&lt;p&gt;I recently switched to Elementary from Ubuntu as day-today distro. But I'm not able to use alt-spacebar menu, if I want to maximize or minimize the window. It's just I hate going over arrow keys. Yeah! Long time Vimmer!&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="3412" LastActivityDate="2017-03-02T23:45:04.657" Title="How can I enable alt-spacebar window menu?" Tags="|release-freya|window-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3498" PostTypeId="1" CreationDate="2015-12-11T11:40:39.690" Score="1" ViewCount="31" Body="&lt;p&gt;with windows 10, i hold the central bottom of the mouse and i can scroll up and down pages with mouse movement.&#xA;With elementary os i don't know how allow this functionality.&#xA;Someone can help me?&lt;/p&gt;&#xA;" OwnerUserId="3414" LastActivityDate="2015-12-11T11:40:39.690" Title="How Allow Central buttom mouse for vertical scrolling" Tags="|mouse|" AnswerCount="0" CommentCount="0" ClosedDate="2015-12-15T23:34:24.780" ContentLicense="CC BY-SA 3.0" />
  <row Id="3499" PostTypeId="1" CreationDate="2015-12-11T13:35:42.100" Score="1" ViewCount="765" Body="&lt;p&gt;After some days of working. i have installed , chrome, php, apache, mysql, teamviewer, skype, and few small apps. mine Freya takes time to boot. What is the reason for the delay. and anything i can do to decrease the boot time. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-12-12T09:03:31.293" Title="Taking time to boot Freya" Tags="|release-freya|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3500" PostTypeId="1" AcceptedAnswerId="3509" CreationDate="2015-12-11T14:16:28.553" Score="-1" ViewCount="340" Body="&lt;p&gt;I was a very devoted Elementary OS user (I used Elementary 0.2 for more than a year and a half) but in the last year I've moved to Fedora 20 for stability reasons. Elementary OS is an awesome OS, but I need a more stable OS because I work with Big Data and Machine Learning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really liked the &lt;code&gt;dnf&lt;/code&gt; package manager (from Fedora, CentOS, etc.) and I also loved the &lt;code&gt;pacman&lt;/code&gt; (Arch Linux) package manager. I know that &lt;code&gt;apt&lt;/code&gt; is derived from Ubuntu, but there's any plans on switching to a new package manager in the near future? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; is awnkward, ugly and everything crashes with it. Elementary OS is the Linux distribution of the future (at least for the end-user), this great system don't deserves &lt;code&gt;apt&lt;/code&gt;. It deserves something better, faster and prettier than apt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any plans on that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="3415" LastActivityDate="2015-12-11T20:45:50.833" Title="There's any plans on switching to a new package manager (like dnf or pacman)?" Tags="|apt|package-management|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3501" PostTypeId="2" ParentId="3499" CreationDate="2015-12-11T15:04:21.850" Score="2" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Control Startup Applications:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The less programs you have loading on bootup, the faster your system should be. You can control these startup applications from the system settings --&gt; applications --&gt; startup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/kpPEI.png&quot; alt=&quot;Imgur&quot;&gt;&lt;br&gt;&#xA;(I don't have many apps to show )&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install &lt;code&gt;BootUp-Manager&lt;/code&gt; from software center to disable any un-necessary services. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use &lt;code&gt;bootchart&lt;/code&gt; to produce detailed graphs of what takes time during boot.&lt;br&gt;&#xA;Install it from software center. After installation, reboot your system, the bootchart is in &lt;code&gt;/var/log/bootchart&lt;/code&gt; as a &lt;code&gt;.png&lt;/code&gt; file. It might help in deciding what to remove (or disable).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Further references:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.howtogeek.com/69753/how-to-cut-your-linux-pcs-boot-time-in-half-with-e4rat/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How To Cut Your Linux PC’s Boot Time in Half With E4rat&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From comment by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/137/elmato&quot;&gt;@elmato&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you follow that e4rat tutorial you may hit a roadblock when you are attempting to boot into &lt;code&gt;single&lt;/code&gt; user mode (by appending single to the end of the boot option string). If you find you get no prompt, use &lt;code&gt;rw init=/bin/bash&lt;/code&gt; instead of &lt;code&gt;single&lt;/code&gt;. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.howtogeek.com/115797/6-ways-to-speed-up-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;6 Ways to Speed Up Your PC&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-12-12T09:03:31.293" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3504" PostTypeId="1" CreationDate="2015-12-11T16:09:50.240" Score="9" ViewCount="870" Body="&lt;p&gt;I don't know why I get a black screen when I try to lock the screen (&lt;kbd&gt;super&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt;), after a while it shows normal, the wallpaper and the option to unlock with my password, but I wonder why I get this black screen before, is does not happen in Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another issue is than when my laptop is suspended for a long (very long) time or I don't shut it off in many days, when I try to wake it up I get a black screen for a while.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix this? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2856" LastEditorUserId="2708" LastEditDate="2015-12-11T16:10:44.933" LastActivityDate="2019-03-15T04:59:20.990" Title="Black screen when try to lock screen" Tags="|greeter|display|suspend|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3505" PostTypeId="1" CreationDate="2015-12-11T16:52:42.933" Score="2" ViewCount="99" Body="&lt;p&gt;I have elementry OS freya , while working yesterday i did something unknowingly , now my sidebar does not show devices , Below is the screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NyQvY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NyQvY.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help , how can i restore to previous configuration so that devices and Network options are visible again&lt;/p&gt;&#xA;" OwnerUserId="3419" LastEditorUserId="137" LastEditDate="2015-12-12T04:47:25.017" LastActivityDate="2015-12-12T04:55:15.460" Title="Sidebar not showing sytsem and USB Devices along with Personals" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-15T23:30:18.203" ContentLicense="CC BY-SA 3.0" />
  <row Id="3506" PostTypeId="1" CreationDate="2015-12-11T18:19:38.553" Score="3" ViewCount="711" Body="&lt;p&gt;I have a computer connected to an LCD TV with a Radeon 6770HD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During installation everything was fine, but when I boot everything is very large.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing the drivers from the AMD website didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, this is not an issue on Ubuntu or Mint - just elementary OS and Trenta.&lt;/p&gt;&#xA;" OwnerUserId="3420" LastEditorUserId="37" LastEditDate="2015-12-11T19:11:05.417" LastActivityDate="2019-08-29T07:03:30.437" Title="Large icons, windows, fonts, etc" Tags="|settings|desktop|icons|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3507" PostTypeId="1" AcceptedAnswerId="3520" CreationDate="2015-12-11T19:03:28.910" Score="0" ViewCount="220" Body="&lt;p&gt;Now I have Elementary OS 0.3.2 Freya on Ubuntu 14.04&lt;/p&gt;&#xA;" OwnerUserId="3421" LastActivityDate="2015-12-12T04:56:40.620" Title="Can i update ubuntu from 14.04 to 15.04?" Tags="|updates|ubuntu|" AnswerCount="1" CommentCount="0" ClosedDate="2015-12-13T12:05:42.997" ContentLicense="CC BY-SA 3.0" />
  <row Id="3508" PostTypeId="1" AcceptedAnswerId="3518" CreationDate="2015-12-11T20:21:49.907" Score="6" ViewCount="712" Body="&lt;p&gt;I have a large folder of pdfs. Every time I open it with files it has to load these little preview icons which takes pretty much time. How can I disable this? &lt;/p&gt;&#xA;" OwnerUserId="3423" LastActivityDate="2019-09-20T14:07:15.523" Title="How to deactivate pdf preview in files" Tags="|files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3509" PostTypeId="2" ParentId="3500" CreationDate="2015-12-11T20:25:22.577" Score="2" Body="&lt;p&gt;There are not any plans to switch away from Debian/apt at this time&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-11T20:25:22.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3510" PostTypeId="2" ParentId="3500" CreationDate="2015-12-11T20:45:50.833" Score="3" Body="&lt;p&gt;Ubuntu itself is apparently working on &lt;a href=&quot;http://www.pcworld.com/article/2942267/why-ubuntu-plans-to-replace-traditional-linux-packages-with-something-better.html&quot; rel=&quot;nofollow&quot;&gt;replacing Deb packages with Snappy apps&lt;/a&gt;, and GNOME is working on cross-distro &lt;a href=&quot;https://wiki.gnome.org/Projects/SandboxedApps&quot; rel=&quot;nofollow&quot;&gt;sandboxed applications&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wouldn't be surprised if one of these projects made it into Ubuntu LTS, which could get rolled into Elementary. To be clear, that's &lt;em&gt;100% speculation&lt;/em&gt; on my part. That said, folks from upstream projects definitely are working on new packaging tools.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2015-12-11T20:45:50.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3511" PostTypeId="1" CreationDate="2015-12-11T20:46:00.553" Score="9" ViewCount="19411" Body="&lt;p&gt;I have been repeatedly trying to get elementary OS to boot on my PC to no avail. I have tried both &lt;code&gt;unetbootin&lt;/code&gt; and &lt;code&gt;Rufus&lt;/code&gt; to make my USB bootable and two different USB sticks. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whenever I boot from the USB, it opens up a black screen with the elementary logo in the middle. I had read that sometimes it takes a while for it to boot, so I let it sit. I came back 12 hours later and it hadn't changed.&lt;/p&gt;&#xA;" OwnerUserId="3424" LastEditorUserId="5565" LastEditDate="2016-10-29T19:37:20.457" LastActivityDate="2019-05-09T06:14:28.210" Title="Stuck on glowing elementary logo while booting" Tags="|system-installation|boot|live-cd|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3513" PostTypeId="2" ParentId="3481" CreationDate="2015-12-11T21:50:22.300" Score="1" Body="&lt;p&gt;HiDPI displays (like the one in your retina Macbook) aren't yet supported by elementary OS. You won't have a good time trying to install on this hardware.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-11T21:50:22.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3514" PostTypeId="1" CreationDate="2015-12-12T00:44:51.110" Score="5" ViewCount="2970" Body="&lt;p&gt;I have a small USB drive that I use to run elementary OS.  I want to use this in multiple PC's so it can't have any specific configuration.  The issue is that I like to use it on my work PC as although it has nice hardware, it still runs XP, and has so many dodgey chinese apps on it that it runs so slow and I don't trust the security. On this PC it boots fine as it has a legacy style BIOS so grub-pc works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also want to run it on my UEFI PC at home as Windows 8.1+ don't support my MIDI drums. The problem is that on my home PC I get a black screen unless I boot through recovery mode but this seems to disable GPU acceleration. I think the issue is related to it having grub-pc and not grub-uefi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to have GRUB UEFI and GRUB-PC installed at the same time?&lt;/p&gt;&#xA;" OwnerUserId="3425" LastEditorUserId="3757" LastEditDate="2016-04-04T14:18:18.103" LastActivityDate="2016-04-04T14:18:18.103" Title="UEFI and Legacy boot" Tags="|grub|uefi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3515" PostTypeId="2" ParentId="3496" CreationDate="2015-12-12T01:46:47.267" Score="3" Body="&lt;p&gt;The default name of the app is : &lt;code&gt;gnome-screenshot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open software center and remove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to use terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove gnome-screenshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-12T01:46:47.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3516" PostTypeId="1" AcceptedAnswerId="3517" CreationDate="2015-12-12T02:30:04.760" Score="7" ViewCount="759" Body="&lt;p&gt;Recently new update &lt;em&gt;0.3.2&lt;/em&gt; is released, more than  5 million downloads. The elementary OS is becoming one of the major distro ( I believe, at present it is, but it will &lt;em&gt;increase&lt;/em&gt; in future). We (=EU) are happy with the &lt;em&gt;free&lt;/em&gt; distribution. On the other hand, it costs very much to the elementary team for  development, marketing, and maintenance etc.,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Who pays for elementary. Is there any contribution from canonical?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I know its ask for contribution before downloading .iso, but since that is optional many &lt;strong&gt;may&lt;/strong&gt; skip&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how elementary  make money? Are there any dedicated (permanent) employees (devs)?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-12T03:10:20.790" Title="How does elementary make money and who pays?" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3517" PostTypeId="2" ParentId="3516" CreationDate="2015-12-12T03:03:41.737" Score="9" Body="&lt;p&gt;elementary's primary source of income is from &lt;a href=&quot;https://elementary.io/&quot;&gt;pay-what-you-want downloads&lt;/a&gt;. That accounts for something like 70% of monthly income. One-time &lt;a href=&quot;https://elementary.io/get-involved#funding&quot;&gt;PayPal payments and Patreon&lt;/a&gt; account for most other income and we make a small amount on &lt;a href=&quot;https://elementary.io/store&quot;&gt;retail sales&lt;/a&gt; (shirts and stickers).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.bountysource.com/teams/elementary&quot;&gt;Bountysource&lt;/a&gt; is its own thing. When people contribute to our account on Bountysource, it stays in Bountysource. We never withdraw money from that account into our regular account. It is only used for bounties.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You're right that many people choose not to pay anything. The last time I checked, over 99% of downloaders don't pay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary doesn't have any investors or outside corporate influence. We don't make advertising deals and we don't have any software products that aren't available at no cost. We only make money when our users give it voluntarily.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment elementary employs just two people full-time.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-12-12T03:10:20.790" LastActivityDate="2015-12-12T03:10:20.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3518" PostTypeId="2" ParentId="3508" CreationDate="2015-12-12T03:19:22.513" Score="5" Body="&lt;p&gt;Pantheon-files uses a thumbnailer daemon called &lt;a href=&quot;http://docs.xfce.org/xfce/thunar/tumbler&quot; rel=&quot;nofollow noreferrer&quot;&gt;tumbler&lt;/a&gt; . You can disable generation of thumbnails for PDFs by opening a terminal and editing the config file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/tumbler/tumbler.rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Search for the section listed below-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# PDF/PS thumbnailer&#xA;[PopplerThumbnailer]&#xA;Disabled=false&#xA;Priority=1&#xA;Locations=&#xA;MaxFileSize=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;Disabled=false&lt;/code&gt; to &lt;code&gt;Disabled=true&lt;/code&gt; (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;O&lt;/kbd&gt;,&lt;kbd&gt;Enter&lt;/kbd&gt; to save the file, &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; to exit nano)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then reset your thumbnail cache  with &lt;code&gt;rm -r ~/.cache/thumbnails&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: Rather than disabling thumbnails for all PDFs, you could set the &lt;code&gt;Locations&lt;/code&gt; or &lt;code&gt;MaxFileSize&lt;/code&gt; options to your liking. Unfortunately though, as far as I can tell the &lt;code&gt;Locations&lt;/code&gt; setting only allows you to whitelist rather than blacklist folders.&lt;/p&gt;&#xA;" OwnerUserId="137" LastEditorUserId="18392" LastEditDate="2019-08-29T06:56:04.777" LastActivityDate="2019-08-29T06:56:04.777" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="3519" PostTypeId="2" ParentId="3505" CreationDate="2015-12-12T04:55:15.460" Score="1" Body="&lt;p&gt;Close the file manager then run the following commands in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.files.preferences show-sidebar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This may not be necessary, though won't hurt:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.files.preferences sidebar-width&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-12-12T04:55:15.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3520" PostTypeId="2" ParentId="3507" CreationDate="2015-12-12T04:56:40.620" Score="0" Body="&lt;p&gt;It's Linux. So, there is always a way. However, I would personally recommend that you should not. &#xA;Why?&#xA;Freya is based on Ubuntu 14.04 (LTS), and you want to go to some unstable version, only for latest and unreliable software!&#xA;Wait a while. The next LTS version is coming soon, and you will soon get the next Elementary OS Loki!&lt;/p&gt;&#xA;" OwnerUserId="3427" LastActivityDate="2015-12-12T04:56:40.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3522" PostTypeId="1" CreationDate="2015-12-12T10:37:11.107" Score="2" ViewCount="458" Body="&lt;p&gt;I am trying to connect my windows 8 with freya to share files. But its showing some error like this. There in my windows 8 I turned on sharing and its ready to connect. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/41IQT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/41IQT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help me to fix it and share files from Windows to Freya&lt;/p&gt;&#xA;" OwnerUserId="3146" LastActivityDate="2015-12-12T10:37:11.107" Title="Can't Connect with Windows Network" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-28T18:59:16.750" ContentLicense="CC BY-SA 3.0" />
  <row Id="3523" PostTypeId="1" AcceptedAnswerId="3525" CreationDate="2015-12-12T11:12:17.487" Score="6" ViewCount="1067" Body="&lt;p&gt;I am learning vala. I need to setup vala environment on my elementary OS. How to install Vala on elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-13T08:13:44.210" Title="How to install Vala on elementary OS" Tags="|release-freya|software-installation|programming|vala|ide|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3524" PostTypeId="2" ParentId="3523" CreationDate="2015-12-12T14:08:42.563" Score="0" Body="&lt;p&gt;Install the vala compiler &lt;code&gt;valac&lt;/code&gt; :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;from &lt;strong&gt;software center&lt;/strong&gt; or&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;with terminal command: &lt;code&gt;sudo apt-get install valac&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;IDE Support&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;There are various projects in various states of stability in order to provide IDE support for Vala:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://www.geany.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Geany&lt;/a&gt; is an integrated development environment with support for vala syntax and code completion.&lt;/p&gt;&#xA;&lt;p&gt;Install from software center or with terminal command: &lt;code&gt;sudo apt-get install geany&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://github.com/carbonfx/netbeans-valaproject#readme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Netbeans&lt;/a&gt; - Plugin for the Netbeans IDE for Vala&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Projects/Valencia&quot; rel=&quot;nofollow noreferrer&quot;&gt;Valencia&lt;/a&gt; - Vala plugin for gedit&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://github.com/Valama/valama&quot; rel=&quot;nofollow noreferrer&quot;&gt;Valama&lt;/a&gt; - An IDE with glade editor &amp;amp; symbols navigator&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Reference : &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/Tools&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala Tools&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Useful resources:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://valadoc.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala - Documentation&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Projects/Vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala - Compiler for the GObject type system&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikibooks.org/wiki/Vala_Programming&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala Programming&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://live.gnome.org/Vala/Tutorial&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala Tutorial&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://elementary.io/docs/code/getting-started#developer-sdk&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary docs&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-13T08:13:44.210" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3525" PostTypeId="2" ParentId="3523" CreationDate="2015-12-12T21:13:45.870" Score="5" Body="&lt;p&gt;You should check the elementary &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow&quot;&gt;Development Guide&lt;/a&gt;. In the section &quot;&lt;a href=&quot;https://elementary.io/docs/code/getting-started#developer-sdk&quot; rel=&quot;nofollow&quot;&gt;Developer SDK&lt;/a&gt;&quot; we cover grabbing essential development libraries, including the Vala compiler.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For development tasks, you're going to be spending a lot of time in Terminal. The command we recommend for grabbing these development essentials is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get build-dep granite-demo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;build-dep&lt;/code&gt; part here is short for &quot;build dependencies&quot;. This command tells &lt;code&gt;apt&lt;/code&gt; to install everything that would be required to build the package &lt;code&gt;granite-demo&lt;/code&gt;. That not only includes the Vala compiler, but Gtk+ development libraries and other things that you'll want to have if your goal is to develop apps for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only want to get the vala compiler and no other development libraries, you can use the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install valac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-12-13T05:24:50.320" LastActivityDate="2015-12-13T05:24:50.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3527" PostTypeId="1" CreationDate="2015-12-13T05:22:54.687" Score="2" ViewCount="417" Body="&lt;p&gt;I just ran &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dd if=/dev/zero of=./largefile bs=1M count=1024&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and got &quot;1073741824 bytes (1.1 GB) copied, 10.2641 s, 105 MB/s&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;read speeds are only 20 MB/s faster.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran the dsmeg grep thing and my laptop def. is sata 6gb/s And my bios has AHCI on.&#xA;So I don't know what it could be. Anyone else have this drive? Can you test your speeds? This thing is supposed to be rated for 500 MB/s read and write!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(edited to main question)&lt;/p&gt;&#xA;" OwnerUserId="3434" LastEditorUserId="3434" LastEditDate="2015-12-26T06:32:25.663" LastActivityDate="2016-08-22T11:06:12.923" Title="Crazy slow ssd speeds with a Samsung 850 evo" Tags="|release-freya|ssd|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3528" PostTypeId="1" CreationDate="2015-12-13T06:06:51.003" Score="1" ViewCount="24" Body="&lt;p&gt;on my eeePC, when I set up a brightness value on battery mode, it affects also AC mode and vice-versa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a solution to this issue?.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the answer&lt;/p&gt;&#xA;" OwnerUserId="3435" LastActivityDate="2015-12-13T06:06:51.003" Title="eeePC brightness doesn't switch from AC to battery mode" Tags="|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3529" PostTypeId="1" CreationDate="2015-12-13T10:50:19.360" Score="1" ViewCount="76" Body="&lt;p&gt;How can I change code table (cp1251 or koi-8)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did not find any preference for it.&lt;/p&gt;&#xA;" OwnerUserId="3436" LastEditorUserId="3436" LastEditDate="2015-12-13T11:01:37.477" LastActivityDate="2018-12-07T22:41:57.317" Title="Problem with Cirillic. How can I change code table (cp1251 or koi-8)?" Tags="|code|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3530" PostTypeId="1" CreationDate="2015-12-13T11:47:55.847" Score="3" ViewCount="377" Body="&lt;p&gt;I sometimes have a problem shutting down elementary freya 0.3.2 (running on an early 2008 MacBook). After the system shuts down all devices (modem etc), the output is like this:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;*will now halt&lt;/p&gt;&#xA;&lt;p&gt;[7128.252276] hub 6-0:1.0 hub_port_status failed (err= -110)&lt;/p&gt;&#xA;&lt;p&gt;[7128.252427] hub 6-0:1.0 hub_port_status failed (err= -110)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;*will now halt&lt;/p&gt;&#xA;&lt;p&gt;[4591.300273] hub 6-0:1.0 hub_port_status failed (err= -110)&lt;/p&gt;&#xA;&lt;p&gt;[4591.300249] hub 6-0:1.0 hub_port_status failed (err= -110)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Then it just hangs and I have to turn off the machine using the power button. Any ideas? The problem occurs randomly and I don't know if the numbers in brackets are always the ones I mentioned here, they're just examples.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-13T21:45:23.580" Title="Why does elementary not shut down properly?" Tags="|release-freya|shutdown|" AnswerCount="0" CommentCount="2" ClosedDate="2019-02-20T16:11:44.867" ContentLicense="CC BY-SA 3.0" />
  <row Id="3531" PostTypeId="1" CreationDate="2015-12-13T11:59:43.273" Score="6" ViewCount="3230" Body="&lt;p&gt;So, I'm trying out Elementary on a virtual machine before committing to it, and I've had nothing but problems along the way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed the VB Guest Additions and I've enabled 3D acceleration, but when I try to enable the graphics drivers I'm met with this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YhR79.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YhR79.png&quot; alt=&quot;Yes that&amp;#39;s the actual size&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No guide I've found has helped me, as most of them just say &quot;install the guest additions and restart the vm&quot;, which hasn't helped me at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;VM Specs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary OS 0.3.1 x64&lt;/li&gt;&#xA;&lt;li&gt;VirtualBox 5.0.10&lt;/li&gt;&#xA;&lt;li&gt;2 GB RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Host Specs (if these matter at all):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Windows 8.1 x64&lt;/li&gt;&#xA;&lt;li&gt;Intel i7-3770&lt;/li&gt;&#xA;&lt;li&gt;nVidia GeForce GTX 680&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output of &lt;code&gt;lsmod | grep vbox&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;vboxsf                45056  0&#xA;vboxvideo             16384  0&#xA;vboxguest            249856  2 vboxsf&#xA;drm                  344064  2 vboxvideo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output of &lt;code&gt;sudo lspci -v&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)&#xA;    Flags: fast devsel&#xA;&#xA;00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]&#xA;    Flags: bus master, medium devsel, latency 0&#xA;&#xA;00:01.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 8a [Master SecP PriP])&#xA;    Flags: bus master, fast devsel, latency 64&#xA;    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]&#xA;    [virtual] Memory at 000003f0 (type 3, non-prefetchable)&#xA;    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]&#xA;    [virtual] Memory at 00000370 (type 3, non-prefetchable)&#xA;    I/O ports at d000 [size=16]&#xA;    Kernel driver in use: ata_piix&#xA;&#xA;00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter (prog-if 00 [VGA controller])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 18&#xA;    Memory at e0000000 (32-bit, prefetchable) [size=16M]&#xA;    Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&#xA;&#xA;00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)&#xA;    Subsystem: Intel Corporation PRO/1000 MT Desktop Adapter&#xA;    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19&#xA;    Memory at f0000000 (32-bit, non-prefetchable) [size=128K]&#xA;    I/O ports at d010 [size=8]&#xA;    Capabilities: [dc] Power Management version 2&#xA;    Capabilities: [e4] PCI-X non-bridge device&#xA;    Kernel driver in use: e1000&#xA;&#xA;00:04.0 System peripheral: InnoTek Systemberatung GmbH VirtualBox Guest Service&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 20&#xA;    I/O ports at d020 [size=32]&#xA;    Memory at f0400000 (32-bit, non-prefetchable) [size=4M]&#xA;    Memory at f0800000 (32-bit, prefetchable) [size=16K]&#xA;    Kernel driver in use: vboxguest&#xA;&#xA;00:05.0 Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 01)&#xA;    Subsystem: Dell Device 0177&#xA;    Flags: bus master, medium devsel, latency 64, IRQ 21&#xA;    I/O ports at d100 [size=256]&#xA;    I/O ports at d200 [size=64]&#xA;    Kernel driver in use: snd_intel8x0&#xA;&#xA;00:06.0 USB controller: Apple Inc. KeyLargo/Intrepid USB (prog-if 10 [OHCI])&#xA;    Flags: bus master, fast devsel, latency 64, IRQ 22&#xA;    Memory at f0804000 (32-bit, non-prefetchable) [size=4K]&#xA;    Kernel driver in use: ohci-pci&#xA;&#xA;00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 9&#xA;&#xA;00:0d.0 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 02) (prog-if 01 [AHCI 1.0])&#xA;    Flags: bus master, fast devsel, latency 64, IRQ 21&#xA;    I/O ports at d240 [size=8]&#xA;    I/O ports at 0000&#xA;    I/O ports at d250 [size=8]&#xA;    I/O ports at 0000&#xA;    I/O ports at d260 [size=16]&#xA;    Memory at f0806000 (32-bit, non-prefetchable) [size=8K]&#xA;    Capabilities: [70] Power Management version 3&#xA;    Capabilities: [a8] SATA HBA v1.0&#xA;    Kernel driver in use: ahci&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3437" LastEditorUserId="3437" LastEditDate="2015-12-18T23:29:28.680" LastActivityDate="2016-01-04T22:16:00.073" Title="Graphics drivers not working after installing VirtualBox Guest Additions" Tags="|release-freya|graphic-drivers|virtualbox|" AnswerCount="0" CommentCount="10" ClosedDate="2016-10-21T20:54:20.527" ContentLicense="CC BY-SA 3.0" />
  <row Id="3532" PostTypeId="1" AcceptedAnswerId="3564" CreationDate="2015-12-13T14:51:09.177" Score="2" ViewCount="3333" Body="&lt;p&gt;I use Freya (0.3.2) and I tested the webkit4 (&lt;a href=&quot;http://valadoc.org/#!api=webkit2gtk-4.0/WebKit.WebView&quot; rel=&quot;nofollow&quot; title=&quot;link to ValaDoc&quot;&gt;LINK&lt;/a&gt;), but do not work.&#xA;The code is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public class Envideos : Gtk.Window {&#xA;    public Envideos () {&#xA;    this.title = &quot;Envideos&quot;;&#xA;    this.window_position = Gtk.WindowPosition.CENTER;&#xA;    this.destroy.connect (Gtk.main_quit);&#xA;    this.set_default_size (800, 600);&#xA;&#xA;    WebKit.WebView thewebview2 = new WebKit.WebView();&#xA;    }&#xA;}&#xA;&#xA;public static int main (string[] args) {&#xA;    Gtk.init (ref args);&#xA;    Envideos window = new Envideos ();&#xA;    window.show_all ();&#xA;    Gtk.main ();&#xA;    return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Ok, now I run valac and the resul is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;valac --pkg gtk+-3.0 --pkg webkit2gtk-4.0 testwebkit4.vala&#xA;testwebkit4.vala:8.17-8.50: warning: local variable `thewebview2' declared but never used&#xA;WebKit.WebView thewebview2 = new WebKit.WebView();&#xA;               ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/jockerfox/Projects-Eos/envideos/src/testwebkit4.vala.c:8:29: fatal error: webkit2/webkit2.h: File o directory non esistente &#xA;#include &amp;lt;webkit2/webkit2.h&amp;gt;&#xA;                            ^&#xA;compilation terminated.&#xA;error: cc exited with status 256&#xA;Compilation failed: 1 error(s), 1 warning(s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Obviusly, forgotten the warning but concentrate to error.&#xA;Note that I have got the libwebkit2gtk-3.0-dev installed on my Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where I wrong ?&lt;/p&gt;&#xA;" OwnerUserId="3438" LastActivityDate="2015-12-15T18:26:37.973" Title="Fatal error with webkit2gtk-4.0 (webkit2.h)" Tags="|programming|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3533" PostTypeId="1" AcceptedAnswerId="3534" CreationDate="2015-12-13T15:39:20.783" Score="2" ViewCount="2916" Body="&lt;p&gt;I installed Firefox by doing this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; 1. wget&#xA;    https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/42.0/linux-x86_64/en-US/firefox-42.0.tar.bz2&#xA; 2. tar -xjvf firefox-42.0.tar.bz2&#xA; 3. sudo rm -rf /opt/firefox*&#xA; 4. sudo mv firefox /opt/firefox&#xA; 5. sudo ln -sf /opt/firefox/firefox /usr/bin/firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I run it on terminal, the only option that I have when right click on Firefox's icon on Dock is &quot;Close&quot;. How can I add Firefox to Dock?&lt;/p&gt;&#xA;" OwnerUserId="3162" LastActivityDate="2015-12-13T17:13:03.180" Title="How to add Firefox to Dock?" Tags="|release-freya|plank|firefox|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3534" PostTypeId="2" ParentId="3533" CreationDate="2015-12-13T17:13:03.180" Score="5" Body="&lt;p&gt;To get an icon on plank (and in slingshot) an app needs to have a corresponding .desktop file in &lt;code&gt;/usr/share/applications/&lt;/code&gt;.&#xA;The desktop file also handles MimeTypes and lets you specify additional menu options (such as 'Open New Window' etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: If you install firefox from the apt repositories with &lt;code&gt;sudo apt-get install firefox&lt;/code&gt; it will update to v42 and the desktop file will be created for you. Since you have already installed it by other means, &lt;a href=&quot;http://pastebin.com/FzL7189h&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt; is the &lt;em&gt;firefox.desktop&lt;/em&gt; file it includes.&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-12-13T17:13:03.180" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3535" PostTypeId="1" AcceptedAnswerId="3537" CreationDate="2015-12-13T21:22:25.893" Score="1" ViewCount="1648" Body="&lt;p&gt;I used rvm to install ruby 2.2.3. Then I installed rails 4.2.5. I create an app by &lt;code&gt;rails new ...&lt;/code&gt; and then &lt;code&gt;cd&lt;/code&gt; into it. I try to run it with &lt;code&gt;rails server&lt;/code&gt;. And...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.rvm/gems/ruby-2.2.3/gems/bundler-1.11.0/lib/bundler/runtime.rb:80:in `rescue in block (2 levels) in require': There was an error while trying to load the gem 'uglifier'. (Bundler::GemRequireError)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That's what I get. In my Gemfile I have `gem 'uglifier', '&gt;= 1.3.0'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing? It's my first try in RoR and it's getting a bit frustrating.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-12-17T16:56:36.703" Title="Ruby on Rails on elementary OS, uglifier error when starting server" Tags="|web-development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3537" PostTypeId="2" ParentId="3535" CreationDate="2015-12-13T22:17:11.400" Score="0" Body="&lt;p&gt;Actually having meteor installed doesn't count as having nodejs installed. nodejs is required for uglifier package, so simple: &lt;code&gt;apt install nodejs&lt;/code&gt; resolves the issue.&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2015-12-13T22:17:11.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3539" PostTypeId="2" ParentId="1807" CreationDate="2015-12-14T03:49:01.523" Score="2" Body="&lt;p&gt;Finally, a &lt;em&gt;simple&lt;/em&gt; solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/preferences &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above command open the file, if not there, it will create.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you want to hold &lt;code&gt;vlc&lt;/code&gt; (for example) to specific version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now add the following lines to the above file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package: vlc&#xA;Pin: version 2.1.6-0ubuntu14.04.1&#xA;Pin-Priority: -1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;Package&lt;/code&gt; is package name.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;Pin&lt;/code&gt; is version you want to hold&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After that run : &lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Test&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before pin:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy vlc&#xA;vlc:&#xA;   Installed: 2.1.6-0ubuntu14.04.1&#xA;   Candidate: 2.2.1~trusty1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After pin:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy vlc&#xA;vlc:&#xA;    Installed: 2.1.6-0ubuntu14.04.1&#xA;    Candidate: 2.1.6-0ubuntu14.04.1&#xA;    Package pin: 2.1.6-0ubuntu14.04.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To revert,  remove the content of &lt;code&gt;/etc/apt/preferences&lt;/code&gt; file.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-14T03:56:23.590" LastActivityDate="2015-12-14T03:56:23.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3540" PostTypeId="1" CreationDate="2015-12-14T06:16:08.170" Score="2" ViewCount="168" Body="&lt;p&gt;I'm having a hard time starting with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After managing to install it from a USBKey (0.3.2 32bit version) on an old ACER AspireOne, erasing pre-existing system, I find myself unable to boot it. (I needed 3 attempts as I got twice a weird error of the installer being unable to write file, saying my hardrive must have a problem. In the end selecting the simplest options worked - no encryption, no update during install, no 3rd parties)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I first had to figure how to get a GRUB config (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;How can I fix a secure boot failing to grub when I installed 0.3.1?&lt;/a&gt;) but to no avail as I had no &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Booting from USB key and installing boot-repair helped me get a grub config (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2480/a-fresh-install-boots-to-the-grub-xommand-prompt&quot;&gt;A fresh install boots to the grub command prompt&lt;/a&gt;). I now get a grub menu to choose from, but it unfortunately boots to a black screen.&#xA;In desperation I've tried to add &lt;code&gt;nomodeset&lt;/code&gt; to the command in grub (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/911/black-screen-after-grub-windows-8-1-dualboot&quot;&gt;Black Screen after GRUB (Windows 8.1 dualboot)&lt;/a&gt;) but it didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that I have a weird message &lt;code&gt;error: attempt to read or write outside of 'hd0'&lt;/code&gt; appearing before the grub menu and after the selection, just before the screen turn black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I might be a bit unfortunate, but I was hopeful that choosing the simplest setup (full new install, single OS, no secure boot problem) would be straightforward.&lt;/p&gt;&#xA;" OwnerUserId="3444" LastEditorUserId="3757" LastEditDate="2016-05-07T04:16:13.367" LastActivityDate="2016-09-05T18:37:11.260" Title="Unable to boot after install on i386 platform, missing grub, black screen" Tags="|release-freya|system-installation|boot|grub|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3541" PostTypeId="1" CreationDate="2015-12-14T06:32:34.317" Score="0" ViewCount="275" Body="&lt;p&gt;Recently I tried to install  VLC through Software center. But due to internet problem, it was errored while installing.  Now its giving trouble. So I need to remove it then I want to install a fresh copy of it. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="2708" LastEditDate="2015-12-14T07:23:07.153" LastActivityDate="2015-12-15T23:46:21.857" Title="How to remove broken installations?" Tags="|release-freya|vlc|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3542" PostTypeId="1" AcceptedAnswerId="3543" CreationDate="2015-12-14T08:28:24.317" Score="1" ViewCount="91" Body="&lt;p&gt;I tried to install Freya (Dual boot with Windows 8.1) on a Dell Precision M3800 (Screen: 3200x1800, Core i7, 16GB RAM, 512 GB SSD, wireless logitech mouse).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I encountered two problems:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The installation window is much bigger than the screen. For example, I do not see the 1/3 of installation window(s). I already used the Windows-Key + Left-Mouse to drag the window, but that does not work on all installation screens.&lt;/li&gt;&#xA;&lt;li&gt;I can move the mouse around the screen but I can not really click on something. The real click happens on a different location. The X coordinate seems identic to my mouse cursor position but the Y coordinate is completely different. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I downloaded the latest Freya version yesterday.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be very appreciated!&lt;/p&gt;&#xA;" OwnerUserId="3447" LastActivityDate="2015-12-14T09:08:49.780" Title="Installation issues on Freya (mouse + window size)" Tags="|release-freya|system-installation|display|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3543" PostTypeId="2" ParentId="3542" CreationDate="2015-12-14T09:08:49.780" Score="1" Body="&lt;p&gt;According to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3513/3233&quot;&gt;an answer to a recent question&lt;/a&gt; HiDPI displays are not supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect this is the cause of both issues you're experiencing&lt;/p&gt;&#xA;" OwnerUserId="3233" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-12-14T09:08:49.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3544" PostTypeId="2" ParentId="3541" CreationDate="2015-12-14T10:28:05.877" Score="1" Body="&lt;p&gt;I installed &lt;code&gt;Synaptic Package Manager&lt;/code&gt; from software center. You can install it through software center or using the following command on your terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install synaptic &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Than I tried to fix using synaptic.  But it doest not solve my problem and again it's not installing Vlc player. So I used the following command to Fix it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update --fix-missing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that Vlc installed. But it doesnot open. So I moved to get another command to fix the broken installation again. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get --fix-broken install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above command fixed it and than its working fine now. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="26" LastEditDate="2015-12-15T23:46:21.857" LastActivityDate="2015-12-15T23:46:21.857" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3545" PostTypeId="2" ParentId="3541" CreationDate="2015-12-14T10:58:59.303" Score="0" Body="&lt;p&gt;Install &lt;code&gt;synaptic&lt;/code&gt; from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open synaptic and &lt;em&gt;Edit&lt;/em&gt; --&gt; &lt;em&gt;Fix broken packages&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/tDOrn.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;One of the most basic fixes to resolve dependencies problems is to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-14T10:58:59.303" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3547" PostTypeId="1" CreationDate="2015-12-14T12:54:30.107" Score="2" ViewCount="4709" Body="&lt;p&gt;I need to remove an unnecessary shortcut from the applications menu. How do I remove it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is not to hide a shortcut.  I need to remove an icon or shortcut from the menu. not hiding it. &#xA;This is not duplicate question. Please understand the difference between hiding and removing of an icon.&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="26" LastEditDate="2016-10-02T14:14:21.867" LastActivityDate="2016-10-02T14:14:21.867" Title="How to remove a shortcut from applications menu - Freya" Tags="|slingshot|app-shortcuts|" AnswerCount="2" CommentCount="3" ClosedDate="2015-12-15T22:58:14.937" ContentLicense="CC BY-SA 3.0" />
  <row Id="3548" PostTypeId="1" CreationDate="2015-12-14T14:13:53.030" Score="6" ViewCount="756" Body="&lt;p&gt;I have installed elementary os from scratch. I have 4 monitors that I want to use as an extended desktop. These were not working by default so I installed an nvidia driver via &quot;additional drivers&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The driver install seemed to work fine but now after a reboot I just get a black screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm new to elementary os and have only used Linux as a Web server prior to this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I go about installing and getting multiple monitors working? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3450" LastEditorUserId="1239" LastEditDate="2015-12-19T02:25:36.173" LastActivityDate="2019-01-02T23:09:50.760" Title="Problems using nvidia drivers/multiple monitors" Tags="|graphic-drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3549" PostTypeId="2" ParentId="3478" CreationDate="2015-12-14T14:38:12.613" Score="4" Body="&lt;p&gt;I believe you are encountering &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1406795&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; bug. If so please login to launchpad and click &lt;em&gt;'affects me'&lt;/em&gt;. In the meantime, you can tell files to use 24hr format with &lt;em&gt;iso&lt;/em&gt; mode:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.files.preferences date-format iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or &lt;em&gt;locale&lt;/em&gt; if you want to see your timezone appended at the end:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.files.preferences date-format locale&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can reset it to the default &lt;em&gt;informal&lt;/em&gt; formatting with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings reset org.pantheon.files.preferences date-format&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2015-12-14T14:38:12.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3551" PostTypeId="2" ParentId="3547" CreationDate="2015-12-14T15:24:17.723" Score="3" Body="&lt;p&gt;Use Mainmenu (AKA &lt;code&gt;alacarte&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software center or with terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/L0ZHt.png&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-14T15:24:17.723" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3553" PostTypeId="2" ParentId="3547" CreationDate="2015-12-14T18:58:05.620" Score="0" Body="&lt;p&gt;Another alternative is MenuLibre&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2015-12-14T18:58:05.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3554" PostTypeId="1" CreationDate="2015-12-14T19:41:49.433" Score="1" ViewCount="149" Body="&lt;p&gt;this is a log from boot-repair:&#xA;&lt;a href=&quot;http://paste2.org/GcL2vLU6&quot; rel=&quot;nofollow&quot;&gt;http://paste2.org/GcL2vLU6&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed elementary OS on /sdb. /sda is a SSD with Win 8.1 on it. Didn't have spare space on /sda so I've put boot info on /sdb. During install there was a fatal error, but I've chosen /sdb as a boot and installation ended successfully. After restart Win 8.1 booted, no grub, no questions asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked BIOS, in &quot;Boot&quot; menu there was no UEFI options to enable/disable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Asus K551 (a.k.a. S551) laptop. Help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Almost forgot - I've tried to repair boot with boot-repair (obviously) and it replied that I need to repair this in UEFI mode, not Legacy mode - what's Legacy Mode? Right now I'm on USB stick, with elementary OS Live. I can boot only to Windows, can I repair grub from there?&#xA;Also I've noticed that boot-repair signals there's no boot loader on /sda nor /sdb - what's up with that? How to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit2: I've managed to done something with boot-repair, these are the results:&#xA;&lt;a href=&quot;http://paste2.org/M6OZmXEG&quot; rel=&quot;nofollow&quot;&gt;http://paste2.org/M6OZmXEG&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm going to reboot now, see you in a bit.&lt;/p&gt;&#xA;" OwnerUserId="3457" LastEditorUserId="3757" LastEditDate="2016-05-06T05:33:38.967" LastActivityDate="2016-05-06T05:33:38.967" Title="Grub problem - elementary OS installed alongside Windows 8.1 - unable to boot linux" Tags="|release-freya|system-installation|dual-boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3555" PostTypeId="1" CreationDate="2015-12-14T20:08:17.660" Score="5" ViewCount="4665" Body="&lt;p&gt;Is it possible to include web shortcuts in the dock? &lt;a href=&quot;http://unity-folders.exceptionfound.com/&quot; rel=&quot;nofollow&quot;&gt;LauncherFolders&lt;/a&gt; does that in Unity for Ubuntu. I like this possibility very much.&lt;/p&gt;&#xA;" OwnerUserId="3453" LastEditorUserId="3757" LastEditDate="2016-05-06T01:59:55.047" LastActivityDate="2016-05-06T01:59:55.047" Title="Is it possible to get website shortcuts in the dock?" Tags="|plank|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3556" PostTypeId="2" ParentId="3555" CreationDate="2015-12-14T21:10:17.253" Score="3" Body="&lt;p&gt;If you're using Midori, you can easily create an App from a webpage (a web app).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the &quot;Settings&quot; button (The Cog symbol in the menu bar) from Midori and select &quot;Applications&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From here, you can create a &quot;New App&quot; from the current page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This App will appear in the Applications menu, and you can right-click and &quot;Add to Dock&quot;&lt;/p&gt;&#xA;" OwnerUserId="3233" LastActivityDate="2015-12-14T21:10:17.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3557" PostTypeId="2" ParentId="3555" CreationDate="2015-12-14T22:06:37.197" Score="2" Body="&lt;p&gt;Another possibility: &lt;a href=&quot;https://quassy.github.io/elementary-apps/Webby/&quot; rel=&quot;nofollow&quot;&gt;Webby&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works very similiar to the Midori Feature&lt;/p&gt;&#xA;" OwnerUserId="3459" LastActivityDate="2015-12-14T22:06:37.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3558" PostTypeId="1" CreationDate="2015-12-15T01:09:30.497" Score="3" ViewCount="1877" Body="&lt;p&gt;(First of all, I'm totally new to this)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed elementary OS alongside Windows 10 (shrinking the main partition of windows with a new empty partition of 100GB, and then installed Elementary using an USB flash drive).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS seems to work perfectly, but i can't access Windows Boot Manager anymore from the GRUB Menu, it says:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/m0R42.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m0R42.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep it mind that i'm using a Lenovo laptop (FLex 14-D).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you help me please?&lt;/p&gt;&#xA;" OwnerUserId="3432" LastEditorUserId="3757" LastEditDate="2016-05-06T05:20:22.680" LastActivityDate="2016-05-06T05:20:22.680" Title="Can't access Windows 10 after dual boot" Tags="|release-freya|system-installation|dual-boot|microsoft-windows|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3559" PostTypeId="2" ParentId="3555" CreationDate="2015-12-15T03:15:58.837" Score="0" Body="&lt;p&gt;google chrome has add to desktop feature in more tools.&lt;/p&gt;&#xA;" OwnerDisplayName="user2587" LastActivityDate="2015-12-15T03:15:58.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3560" PostTypeId="2" ParentId="3558" CreationDate="2015-12-15T06:09:00.760" Score="0" Body="&lt;p&gt;try firing up a console and &lt;code&gt;sudo grub-update&lt;/code&gt;, then restart and boot windows again.&lt;/p&gt;&#xA;" OwnerUserId="3260" LastActivityDate="2015-12-15T06:09:00.760" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3561" PostTypeId="2" ParentId="3555" CreationDate="2015-12-15T08:15:10.833" Score="2" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;For &lt;a href=&quot;https://www.mozilla.org/en-US/firefox/new/?product=firefox-3.6.8&amp;amp;os=osx%E2%8C%A9=en-US&quot; rel=&quot;nofollow noreferrer&quot;&gt;Firefox&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/savelink/?src=search&quot; rel=&quot;nofollow noreferrer&quot;&gt;SaveLink&lt;/a&gt; add-on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Usage&lt;/em&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to the web page you want to create shortcut, right click, click and select &lt;code&gt;SaveLink&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jnKlr.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save the link to a particular folder and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/250/can-i-add-folders-to-the-dock/252#252&quot;&gt;place the folder in dock&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: &#xA;Before that, make sure the file default application is a browser.&lt;br&gt;&#xA;For that, go to the folder, select the file --&gt; right click --&gt; open with --&gt; other applications --&gt;view applications --&gt; select the default browser. (&lt;em&gt;This has to be done for first time&lt;/em&gt;, from next time you can directly launch from dock )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can use &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/deskcut/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;em&gt;deskCut&lt;/em&gt;&lt;/a&gt;  for this purpose, but its not working for me.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;For &lt;a href=&quot;https://www.google.com/chrome/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;em&gt;chrome&lt;/em&gt;&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to system settings --&gt; More tools --&gt; &lt;em&gt;Add to desktop..&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you will see it in app menu,like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WrXdd.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now &lt;strong&gt;right click&lt;/strong&gt; on it, &lt;em&gt;add to dock&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mm7V0.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;For midori see &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3556/2708&quot;&gt;emjaySX answer&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-15T08:43:50.803" LastActivityDate="2015-12-15T08:43:50.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3563" PostTypeId="2" ParentId="3558" CreationDate="2015-12-15T17:37:09.413" Score="0" Body="&lt;p&gt;I suggest you to follow the Boot-repair instructions, available here: &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/Boot-Repair&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your Windows 10 partition is still intact you will be fine following the instructions.&lt;/p&gt;&#xA;" OwnerUserId="3371" LastActivityDate="2015-12-15T17:37:09.413" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3564" PostTypeId="2" ParentId="3532" CreationDate="2015-12-15T18:26:37.973" Score="2" Body="&lt;p&gt;According with &lt;em&gt;Valadoc&lt;/em&gt; , webkit2gtk-3.0 bindings are replaced in Vala by webkit2gtk-4.0 since version 0.25.2 .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to install &lt;strong&gt;webkit2gtk-4.0&lt;/strong&gt; you can try in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webkit-team/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install libwebkit2gtk-4.0-37 libwebkit2gtk-4.0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to access the WebKit2 documentation, you must run in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libwebkit2gtk-4.0-doc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info about webkit2gtk-4.0 at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://webkitgtk.org/&quot; rel=&quot;nofollow&quot;&gt;WebKitGTK+ Project&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.valadoc.org/#!wiki=webkit2gtk-4.0/index&quot; rel=&quot;nofollow&quot;&gt;WebKitGTK+ Valadoc reference&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2015-12-15T18:26:37.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3565" PostTypeId="2" ParentId="3514" CreationDate="2015-12-15T23:37:07.410" Score="2" Body="&lt;p&gt;As far as I am aware, that is not possible, however I will ask to check. You are probably best simply disabling secure boot on your newer device to maintain compatibility.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-12-15T23:37:07.410" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3566" PostTypeId="1" AcceptedAnswerId="3570" CreationDate="2015-12-16T02:39:12.840" Score="1" ViewCount="573" Body="&lt;p&gt;When the update-manager shows updates, for chrome it shows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;This update does not come from a source that supports changelogs&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6XCRr.png&quot; alt=&quot;Imgur&quot;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a bug report here: &lt;a href=&quot;https://bugs.launchpad.net/launchpad/+bug/253119&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/launchpad/+bug/253119&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone explain me about this message in detail?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2021-05-13T08:35:39.510" Title="This update does not come from a source that supports changelogs" Tags="|google-chrome|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3567" PostTypeId="2" ParentId="3566" CreationDate="2015-12-16T03:04:12.317" Score="2" Body="&lt;p&gt;The issue seems to be a one of design. The primary problem is this: PPAs were never meant to be a way to distribute updates to users. It is a &lt;em&gt;Personal&lt;/em&gt; Package Archive. So PPAs are missing features that real, full repositories have. It appears that the Ubuntu/Launchpad developers feel it is important to keep a distinction between updates that come from an actual repository and ones that come from a PPA. It's very possible that they don't intend to ever change this.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-16T03:04:12.317" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3568" PostTypeId="1" CreationDate="2015-12-16T03:46:58.543" Score="2" ViewCount="284" Body="&lt;p&gt;In Windows , I used to use CCleaner. How to install ccleaner in elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am new to linux so I don't want to use terminal methods(CLI) to clean the system. I would prefer GUI tool/method.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-19T07:40:13.947" LastActivityDate="2015-12-19T07:40:13.947" Title="How to install ccleaner in elementary OS" Tags="|software-installation|" AnswerCount="0" CommentCount="6" FavoriteCount="0" ClosedDate="2015-12-19T07:23:20.503" ContentLicense="CC BY-SA 3.0" />
  <row Id="3569" PostTypeId="2" ParentId="1144" CreationDate="2015-12-16T03:46:58.543" Score="9" Body="&lt;p&gt;CCleaner is not directly available for elementary. You can use &lt;code&gt;BleachBit&lt;/code&gt; for this purpose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;bleachbit&lt;/code&gt; from software center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/3mEoZ.jpg&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are comfortable with terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bleachbit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-16T03:46:58.543" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3570" PostTypeId="2" ParentId="3566" CreationDate="2015-12-16T07:25:53.873" Score="2" Body="&lt;p&gt;The standard Debian repository does not have changelog feature. Ubuntu created new site to collect the changelog files of all packages from official repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://changelogs.ubuntu.com/changelogs/&quot; rel=&quot;nofollow&quot;&gt;http://changelogs.ubuntu.com/changelogs/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This could not work with PPA's as they don't want to mix them up with official one. Another thing I can think of, PPA's have no strict policy for package name or version, there is chance to get packages with same name and same version. So may be the correct way to implement this is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Create a different folders structure for PPA changelog site (no site yet)&lt;/li&gt;&#xA;&lt;li&gt;or Add changelog files directly to the repositories with &lt;code&gt;.dsc&lt;/code&gt; &amp;amp; source files. And this is diverge from Debian standards, no harm but extra files for mirrors.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;In the processes to debianize (package for debian) of any tool &amp;amp; documentation, The packager (first maintainer) create a sub-folder named &lt;code&gt;debian/&lt;/code&gt; at the root of source tree. This folder contains many files like &lt;code&gt;control&lt;/code&gt;, &lt;code&gt;rules&lt;/code&gt;, ... so &lt;code&gt;changelog&lt;/code&gt; is one of them.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;4.4 Debian changelog:&lt;/strong&gt; &lt;code&gt;debian/changelog&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Changes in the Debian version of the package should be briefly&#xA;  explained in the Debian changelog file debian/changelog.[15] This&#xA;  includes modifications made in the Debian package compared to the&#xA;  upstream one as well as other changes and updates to the package. [16]&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The format of the debian/changelog allows the package building tools&#xA;  to discover which version of the package is being built and find out&#xA;  other release-specific information.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt; &lt;a href=&quot;https://www.debian.org/doc/debian-policy/ch-source.html&quot; rel=&quot;nofollow&quot;&gt;Debian Policy Manual: Chapter 4 - Source packages&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On each package update or release, a maintainer should update the changelog file before uploading the the debian source package to the repository or PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also get link to changelog from &lt;a href=&quot;http://packages.ubuntu.com/&quot; rel=&quot;nofollow&quot;&gt;http://packages.ubuntu.com/&lt;/a&gt; package page or open the source package with an archive viewer. However, This does not apply to Chrome as it is a closed source and has no source package (only binary). Also I get find a posted changelog or organized release note for Chrome, but chromium share many updates with it. See &lt;a href=&quot;https://productforums.google.com/forum/?hl=en#!category-topic/chrome/discuss-chrome/2dgS-1hA5Tc&quot; rel=&quot;nofollow&quot;&gt;Where can I find the Release-Notes for each version of Google Chrome for Linux?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Other References:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://wiki.debian.org/IntroDebianPackaging&quot; rel=&quot;nofollow&quot;&gt;Introduction to Debian Packaging&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.debian.org/doc/manuals/maint-guide/dreq.en.html&quot; rel=&quot;nofollow&quot;&gt;Chapter 4. Required files under the debian directory&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;How did I get that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I wasn't aware how these things works, I just traced &lt;code&gt;update-manger&lt;/code&gt; network activity.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Run it in background&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ update-manager &amp;amp;&#xA;[1] 25490&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Wait till it finishes updating the package lists.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run trace it network network activity&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo strace -p 25490 -f -e trace=network -s 10000 -o strace_update_manager.log&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click to see changes for another package (Firefox in my example) then for Chrome.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;C&lt;/kbd&gt; to stop tracing&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Check the generated log, You may not able to understand the whole line but at least you can notice the requested filename and &lt;code&gt;404&lt;/code&gt; Not Found HTTP code.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;25641 sendto(14, &quot;GET /changelogs/pool/main/f/firefox/firefox_43.0+build1-0ubuntu0.15.10.1/NEWS.Debian HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: changelogs.ubuntu.com\r\nUser-Agent: Python-urllib/3.4\r\nConnection: close\r\n\r\n&quot;, 203, 0, NULL, 0) = 203&#xA;25641 &amp;lt;... recvfrom resumed&amp;gt; &quot;HTTP/1.1 404 Not Found\r\nDate: Wed, 16 Dec 2015 05:49:09 GMT\r\nServer: Apache\r\nVary: Accept-Encoding\r\nContent-Length: 277\r\nConnection: close\r\nContent-Type: text/html; charset=iso-8859-1\r\n\r\n&amp;lt;!DOCTYPE HTML PUBLIC \&quot;-//IETF//DTD HTML 2.0//EN\&quot;&amp;gt;\n&amp;lt;html&amp;gt;&amp;lt;head&amp;gt;\n&amp;lt;title&amp;gt;404 Not Found&amp;lt;/title&amp;gt;\n&amp;lt;/head&amp;gt;&amp;lt;body&amp;gt;\n&amp;lt;h1&amp;gt;Not Found&amp;lt;/h1&amp;gt;\n&amp;lt;p&amp;gt;The requested URL /changelogs/pool/main/f/firefox/firefox_43.0+build1-0ubuntu0.15.10.1/NEWS.Debian was not found on this server.&amp;lt;/p&amp;gt;\n&amp;lt;/body&amp;gt;&amp;lt;/html&amp;gt;\n&quot;, 8192, 0, NULL, NULL) = 464&#xA;25641 sendto(14, &quot;GET /changelogs/pool/main/f/firefox/firefox_43.0+build1-0ubuntu0.15.10.1/changelog HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: changelogs.ubuntu.com\r\nUser-Agent: Python-urllib/3.4\r\nConnection: close\r\n\r\n&quot;, 201, 0, NULL, 0) = 201&#xA;25641 &amp;lt;... recvfrom resumed&amp;gt; &quot;HTTP/1.1 200 OK\r\nDate: Wed, 16 Dec 2015 05:49:10 GMT\r\nServer: Apache\r\nLast-Modified: Tue, 15 Dec 2015 21:16:47 GMT\r\nETag: \&quot;270220c-6fa90-526f64eac1783\&quot;\r\nAccept-Ranges: bytes\r\nContent-Length: 457360\r\nConnection: close\r\nContent-Type: text/plain; charset=utf-8\r\n\r\nfirefox (43.0+build1-0ubuntu0.15.10.1) wily-security; urgency=medium\n\n  * New upstream stable release (FIREFOX_43_0_BUILD1)\n    - see USN-2833-1\n\n  * Refresh patches\n    - update debian/patches/ubuntu-ua-string-changes.patch\n    - update debian/patches/unity-menubar.patch\n  * Remove patches fixed upstream\n    - remove debian/patches/dont-hardcode-softfp-on-armhf.patch\n    - update debian/patches/series\n\n -- Chris Coulson &amp;lt;chris.coulson@canonical.com&amp;gt;  Thu, 10 Dec 2015 00:44:58 +0000\n\nfirefox (42.0+build2-0ubuntu0.15.10.1) wily-security; urgency=medium\n\n  * New upstream release from the beta channel (FIREFOX_42_0_BUILD2)\n    - see USN-2785-1\n\n  * Refresh patches\n    - update debian/patches/dont-override-general-useragent-locale.patch\n    - update debian/patches/unity-menubar.patch\n  * Update unity-menubar.patch to work with GTK3\n  * Install compare-locales in to the virtualenv with --old-and-unmanageable -\n    the fix for bmo: #1188224 is incompatible with zipped eggs\n  * Turn on the crash reporter again\n\n -- Chris Coulson &amp;lt;chris.coulson@canonical.com&amp;gt;  Wed, 28 Oct 2015 09:56:35 +0000\n\nfirefox (41.0.2+build2-0ubuntu1) wily; urgency=medium\n\n  * New upstream stable release (FIREFOX_41_0_2_BUILD2)\n    - see USN-2768-1\n\n  * Explicitly link with -latomic to fix the build on powerpc\n\n -- Chris Coulson &amp;lt;chris.coulson@canonical.com&amp;gt;  Wed, 14 Oct 2015 09:45:03 +0100\n\nfirefox (41.0.1+build2-0ubuntu1) wily; urgency=medium\n\n  * New upstream stable release (FIREFOX_41_0_1_BUILD2)\n    - see USN-2743-4 and LP: #1501277\n\n  * Disable the crash reporter as symbol uploads are currently broken. This\n    means that Apport will be catching crashes for now\n\n -- Chris Coulson &amp;lt;chris.coulson@canonical.com&amp;gt;  Thu, 01 Oct 2015 17:48:02 +0100\n\nfirefox (41.0+build3-0ubuntu1) wily; urgency=medium\n\n  * New upstream stable release (FIREFOX_41_0_BUILD3)\n    - see USN-2743-1\n\n  * Refresh patches\n    - update debian/patches/ubuntu-bookmarks.patch\n    - update debian/patches/normalize-distribution-searchplugins.patch\n    - update debian/patches/dont-override-general-useragent-locale.patch\n  * Drop backout-bmo1162569.patch and update how we install our distribution\n    searchplugins\n    - update debian/build/rules.mk\n    - add debian/config/searchplugins.conf\n    - add debian/install-distribution-searchplugins.py&quot;, 8192, 0, NULL, NULL) = 2576&#xA;&#xA;25642 sendto(14, &quot;GET /changelogs/pool/main/g/google-chrome-stable/google-chrome-stable_47.0.2526.106-1/NEWS.Debian HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: changelogs.ubuntu.com\r\nUser-Agent: Python-urllib/3.4\r\nConnection: close\r\n\r\n&quot;, 216, 0, NULL, 0) = 216&#xA;25642 &amp;lt;... recvfrom resumed&amp;gt; &quot;HTTP/1.1 404 Not Found\r\nDate: Wed, 16 Dec 2015 05:49:24 GMT\r\nServer: Apache\r\nVary: Accept-Encoding\r\nContent-Length: 290\r\nConnection: close\r\nContent-Type: text/html; charset=iso-8859-1\r\n\r\n&amp;lt;!DOCTYPE HTML PUBLIC \&quot;-//IETF//DTD HTML 2.0//EN\&quot;&amp;gt;\n&amp;lt;html&amp;gt;&amp;lt;head&amp;gt;\n&amp;lt;title&amp;gt;404 Not Found&amp;lt;/title&amp;gt;\n&amp;lt;/head&amp;gt;&amp;lt;body&amp;gt;\n&amp;lt;h1&amp;gt;Not Found&amp;lt;/h1&amp;gt;\n&amp;lt;p&amp;gt;The requested URL /changelogs/pool/main/g/google-chrome-stable/google-chrome-stable_47.0.2526.106-1/NEWS.Debian was not found on this server.&amp;lt;/p&amp;gt;\n&amp;lt;/body&amp;gt;&amp;lt;/html&amp;gt;\n&quot;, 8192, 0, NULL, NULL) = 477&#xA;25642 sendto(14, &quot;GET /linux/chrome/deb/pool/main/g/google-chrome-stable/google-chrome-stable_47.0.2526.106-1_amd64.changelog HTTP/1.1\r\nAccept-Encoding: identity\r\nHost: dl.google.com\r\nUser-Agent: Python-urllib/3.4\r\nConnection: close\r\n\r\n&quot;, 218, 0, NULL, 0) = 218&#xA;25642 &amp;lt;... recvfrom resumed&amp;gt; &quot;HTTP/1.1 404 Not Found\r\nContent-Length: 1449\r\nContent-Type: text/html; charset=utf-8\r\nServer: downloads\r\nX-Content-Type-Options: nosniff\r\nX-Frame-Options: SAMEORIGIN\r\nX-Xss-Protection: 1; mode=block\r\nDate: Wed, 16 Dec 2015 05:49:25 GMT\r\nConnection: close\r\n\r\n\n&amp;lt;!DOCTYPE html&amp;gt;\n&amp;lt;html lang=en&amp;gt;\n  &amp;lt;meta charset=utf-8&amp;gt;\n  &amp;lt;meta name=viewport content=\&quot;initial-scale=1, minimum-scale=1, width=device-width\&quot;&amp;gt;\n  &amp;lt;title&amp;gt;Error 404 (Not Found)!!1&amp;lt;/title&amp;gt;\n  &amp;lt;style&amp;gt;\n    *{margin:0;padding:0}html,code{font:15px/22px arial,sans-serif}html{background:#fff;color:#222;padding:15px}body{margin:7% auto 0;max-width:390px;min-height:180px;padding:30px 0 15px}* &amp;gt; body{background:url(//www.google.com/images/errors/robot.png) 100% 5px no-repeat;padding-right:205px}p{margin:11px 0 22px;overflow:hidden}ins{color:#777;text-decoration:none}a img{border:0}@media screen and (max-width:772px){body{background:none;margin-top:0;max-width:none;padding-right:0}}#logo{background:url(//www.google.com/images/logos/errorpage/error_logo-150x54.png) no-repeat;margin-left:-5px}@media only screen and (min-resolution:192dpi){#logo{background:url(//www.google.com/images/logos/errorpage/error_logo-150x54-2x.png) no-repeat 0% 0%/100% 100%;-moz-border-image:url(//www.google.com/images/logos/errorpage/error_logo-150x54-2x.png) 0}}@media only screen and (-webkit-min-device-pixel-ratio:2){#logo{background:url(//www.google.com/images/logos/errorpage/error_logo-150x54-2x.png) no-repeat;-webkit-background-size:100% 100%}}#logo{display:inline-block;height:54px;width:150px}\n  &amp;lt;/style&amp;gt;\n  &amp;lt;a href=//www.google.com/&amp;gt;&amp;lt;span id=logo aria-label=Google&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/a&amp;gt;\n  &amp;lt;p&amp;gt;&amp;lt;b&amp;gt;404.&amp;lt;/b&amp;gt; &amp;lt;ins&amp;gt;That\342\200\231s an error.&amp;lt;/ins&amp;gt;\n  &amp;lt;p&amp;gt;  &amp;lt;ins&amp;gt;That\342\200\231s all we know.&amp;lt;/ins&amp;gt;\n&quot;, 8192, 0, NULL, NULL) = 1707&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: The lines above are picked by me and the complete log is more verbose then what I posted. Here is the &lt;a href=&quot;http://pastebin.ubuntu.com/14052749/&quot; rel=&quot;nofollow&quot;&gt;full log&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reference:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/q/11709/26246&quot;&gt;How can I capture network traffic of a single process?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2015-12-16T21:48:42.293" LastActivityDate="2015-12-16T21:48:42.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3571" PostTypeId="1" CreationDate="2015-12-16T11:14:43.540" Score="1" ViewCount="584" Body="&lt;p&gt;I had a bunch of held packages and attempted to fix it using Aptitude as suggested &lt;a href=&quot;https://askubuntu.com/questions/601/the-following-packages-have-been-kept-back-why-and-how-do-i-solve-it&quot;&gt;here&lt;/a&gt;. It mentioned removing a bunch of packages, but I accepted that after seeing a few of the packages being updated in the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that was all done I thought I had fixed all of my &quot;issues&quot;, but when I clicked the applications menu (Slingshot) a file browser popped up. Slingshot was no longer installed and when I tried to reinstall it via apt I got the following &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Depends: libplank0 (&amp;gt;= 0.10.1) but it is not going to be installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get similar errors when I try to install plank (an attempt to fix this problem).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I restarted my machine but now after login all I get is my background image. All my other attempts to reinstall the missing packages have been via ssh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to roll back? Or run a repair, that won't compromise my data&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output from &lt;code&gt;apt-cache policy libplank0 plank slingshot&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libplank0:&#xA;Installed: (none)&#xA;Candidate: 0.10.1-0elementary1~ubuntu14.04.2&#xA;Version table:&#xA; 0.10.1-0elementary1~ubuntu14.04.2 0&#xA;    500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA; 0.10.0+bzr1396-0ubuntu1~14.04~ricotz1 0&#xA;    100 /var/lib/dpkg/status&#xA;plank:&#xA;Installed: 0.10.9+bzr1464-0ubuntu1~14.04~ricotz1&#xA;Candidate: 0.10.9+bzr1464-0ubuntu1~14.04~ricotz1&#xA;Version table:&#xA;*** 0.10.9+bzr1464-0ubuntu1~14.04~ricotz1 0&#xA;    500 http://ppa.launchpad.net/ricotz/docky/ubuntu/ trusty/main amd64 Packages&#xA;    100 /var/lib/dpkg/status&#xA; 0.10.1-0elementary1~ubuntu14.04.2 0&#xA;    500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;&#xA;slingshot:&#xA; Installed: (none)&#xA; Candidate: 0.9-1&#xA; Version table:&#xA;   0.9-1 0&#xA;      500 http://za.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3465" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-26T06:50:12.950" Title="Elementary OS Freya stuck on desktop image after boot" Tags="|apt|dependencies|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="3572" PostTypeId="2" ParentId="3435" CreationDate="2015-12-16T16:18:56.837" Score="1" Body="&lt;p&gt;The bug: &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-pantheon-shell/+bug/1524723&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/switchboard-plug-pantheon-shell/+bug/1524723&lt;/a&gt; did not appear in &lt;em&gt;0.3.2&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution would be update to &lt;em&gt;0.3.2&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-16T16:18:56.837" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3573" PostTypeId="1" CreationDate="2015-12-16T17:53:38.693" Score="0" ViewCount="100" Body="&lt;p&gt;What computer architectures are available for elementary OS? Also where can I find (official) list of which architectures are available for elementary OS? For example, see &lt;a href=&quot;https://wiki.ubuntu.com/SecurityTeam/FAQ#Architectures&quot; rel=&quot;nofollow&quot;&gt;Ubuntu's&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="5565" LastEditDate="2016-10-05T21:16:27.440" LastActivityDate="2016-10-05T21:16:27.440" Title="What computer architectures are compatible?" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3574" PostTypeId="2" ParentId="3573" CreationDate="2015-12-16T19:41:54.323" Score="2" Body="&lt;p&gt;There is currently &lt;a href=&quot;http://elementary.io/docs/installation&quot; rel=&quot;nofollow&quot;&gt;2 versions&lt;/a&gt; of elementary OS available:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary OS is currently built for two processor architectures, 32-bit and 64-bit&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;These architectures are formally known as &lt;code&gt;i386&lt;/code&gt; and &lt;code&gt;amd64&lt;/code&gt;, respectively&lt;/p&gt;&#xA;" OwnerUserId="3233" LastEditorUserId="3233" LastEditDate="2015-12-16T22:29:47.860" LastActivityDate="2015-12-16T22:29:47.860" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3576" PostTypeId="1" AcceptedAnswerId="3579" CreationDate="2015-12-17T05:53:01.000" Score="1" ViewCount="3219" Body="&lt;p&gt;I have a very old computer. It has 1 GB RAM, Celeron processor, and intel 82845g graphic card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can run XP smoothly. I wanted to run Linux on it. I installed Ubuntu, it ran but was very sluggish. I installed Lubuntu after that. It worked great but it wasn't looking that good. I heard that Elementary OS could run very well on my system from one of my friends. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed it and its also running very slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am puzzled why it's very slow even though Linux systems are faster than Windows. XP runs without sluggishness in my system. I think it's the graphics drivers because of which Elementary OS is running slow. What do you think why it's running so slow even though I meet the minimum requirements?&lt;/p&gt;&#xA;" OwnerUserId="3475" LastActivityDate="2015-12-17T07:42:59.660" Title="Elementary OS running very slow" Tags="|graphics|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3579" PostTypeId="2" ParentId="3576" CreationDate="2015-12-17T07:42:59.660" Score="3" Body="&lt;p&gt;You are experiencing lag due to the lack or performance of the laptop. It is old. I am not one to say, throw away a linux flavor because of this, but seeing how graphical Elementary is, you might be better off with a distribution tailored for slower older machines....&#xA;Have you tried Ubuntu Mate? That is using a GUI more for older machines, or perhaps LDE gui linux like Lubuntu.... They should perform much better on older hardware... &#xA;Hope you find the perfect one... keeping on the debian / ubuntu structure..&lt;/p&gt;&#xA;" OwnerUserId="3478" LastActivityDate="2015-12-17T07:42:59.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3581" PostTypeId="1" CreationDate="2015-12-17T08:57:33.060" Score="0" ViewCount="684" Body="&lt;p&gt;When I ran: &lt;code&gt;sudo apt-get install vlc&lt;/code&gt;- I got:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install vlc&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;  vlc : Depends: vlc-nox (= 2.1.6-0ubuntu14.04.1) but 2.2.1~trusty1 is to be installed&#xA;     Depends: libvlccore7 (&amp;gt;= 2.1.0) but it is not going to be installed&#xA;     Recommends: vlc-plugin-notify (= 2.1.6-0ubuntu14.04.1) but 2.2.1~trusty1 is to be installed&#xA;     Recommends: vlc-plugin-pulse (= 2.1.6-0ubuntu14.04.1) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy vlc-nox&#xA;vlc-nox:&#xA;    Installed: 2.2.1~trusty1&#xA;    Candidate: 2.2.1~trusty1&#xA;   Version table:&#xA;   *** 2.2.1~trusty1 0&#xA;           100 /var/lib/dpkg/status&#xA;       2.1.6-0ubuntu14.04.1 0&#xA;            500 http://security.ubuntu.com/ubuntu/ trusty-security/universe amd64 Packages&#xA;           500 http://archive.ubuntu.com/ubuntu/ trusty-updates/universe amd64 Packages&#xA;       2.1.2-2build2 0&#xA;          500 http://archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy libvlccore7&#xA;libvlccore7:&#xA;    Installed: (none)&#xA;    Candidate: 2.1.6-0ubuntu14.04.1&#xA;   Version table:&#xA;      2.1.6-0ubuntu14.04.1 0&#xA;        500 http://security.ubuntu.com/ubuntu/ trusty-security/universe amd64 Packages&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty-updates/universe amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;      2.1.2-2build2 0&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ sudo apt-get install libvlccore7&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;   libvlccore7 : Depends: vlc-data (= 2.1.6-0ubuntu14.04.1) but 2.2.1~trusty1 is to be installed&#xA; E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ apt-cache policy vlc-data&#xA;vlc-data:&#xA;  Installed: 2.2.1~trusty1&#xA;  Candidate: 2.2.1~trusty1&#xA;   Version table:&#xA;  *** 2.2.1~trusty1 0&#xA;        100 /var/lib/dpkg/status&#xA;      2.1.6-0ubuntu14.04.1 0&#xA;        500 http://security.ubuntu.com/ubuntu/ trusty-security/universe amd64 Packages&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty-updates/universe amd64 Packages&#xA;      2.1.2-2build2 0&#xA;        500 http://archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-18T15:17:44.960" Title="Unable to install vlc" Tags="|vlc|dependencies|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3582" PostTypeId="2" ParentId="3581" CreationDate="2015-12-17T08:57:33.060" Score="0" Body="&lt;p&gt;From the output of &lt;code&gt;apt-cache policy vlc-nox vlc-data&lt;/code&gt;. You (I) have versions more than required. These two are reason for conflicts.First remove those two:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge vlc-nox vlc-data&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-17T08:57:33.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3583" PostTypeId="1" CreationDate="2015-12-17T09:40:58.630" Score="1" ViewCount="75" Body="&lt;p&gt;Do such desktop database applications as kexy (calligra office suite) work in elementary? In application documentation There's no elementary mentioned as a supporting OS&lt;/p&gt;&#xA;" OwnerUserId="3480" LastActivityDate="2015-12-17T09:50:00.267" Title="Will Kexy (calligra office suite) work in elementary?" Tags="|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3584" PostTypeId="2" ParentId="1144" CreationDate="2015-12-17T09:42:36.023" Score="4" Body="&lt;p&gt;Linux remove unuseful files automaticly way more than windows. An app like CCleaner for windows will not have much work and it is unuseful I think.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can still detect a very few mistakes, remove the data of your programs (reset them, useful especially if you have got chrome wich stores about 2 GB on my computer even if I am nearly not using it), and see if you have got the same file 2 times at a different place. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have a few equivalents including bleachbit (supposed to be the best, haven't tried it), you can also use SystemCleanUpTool, fslint and GTKOrphan.&lt;/p&gt;&#xA;" OwnerUserId="3326" LastActivityDate="2015-12-17T09:42:36.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3585" PostTypeId="2" ParentId="3583" CreationDate="2015-12-17T09:50:00.267" Score="1" Body="&lt;p&gt;Seeing that elementary is a ubuntu based distribution, according to: &#xA;&lt;a href=&quot;https://userbase.kde.org/Calligra/Download#Ubuntu&quot; rel=&quot;nofollow&quot;&gt;https://userbase.kde.org/Calligra/Download#Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current calligra release is unstable on it. &#xA;Also it would require a lot of KDE environment dependencies. &#xA;perhaps Create a Virtual machine of Elementary and then follow the above install guide and see if it breaks before you try it on your live environment? &#xA;:)&lt;/p&gt;&#xA;" OwnerUserId="3478" LastActivityDate="2015-12-17T09:50:00.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3586" PostTypeId="1" CreationDate="2015-12-17T09:59:01.040" Score="2" ViewCount="402" Body="&lt;p&gt;Where can I find a list of applications and other components of the operating system? (E.g., is the desktop environment KDE or GNOME? Where are the names of the applications menu, toolbar at the bottom of the screen, etc.?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would help to have some sort of breakdown of all system components used, so it's easier to know if an app will work, like &quot;made for KDE / Gnome&quot; and what dependencies will be needed, etc.&lt;/p&gt;&#xA;" OwnerUserId="3478" LastEditorUserId="5565" LastEditDate="2016-10-06T17:49:46.803" LastActivityDate="2016-10-09T00:51:24.773" Title="Where to find the list of components of an elementary OS release?" Tags="|applications|development|elementary-project|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3588" PostTypeId="2" ParentId="3586" CreationDate="2015-12-17T10:24:00.880" Score="3" Body="&lt;p&gt;Dan can answer with 100% perfection to your question. I am quoting from the link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/get-involved&quot;&gt;Desktop Development&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Our desktop environment and all its apps are built using Vala, GTK+, Clutter, Cairo, Granite and a number of other free libraries. All of our code is hosted on Launchpad.net, a free service for open source projects.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://code.launchpad.net/~elementary-pantheon&quot;&gt;Desktop code&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://code.launchpad.net/~elementary-apps&quot;&gt;Apps code&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/learning-the-basics#learning-the-basics&quot;&gt;The basis about elementary&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quoting from &lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS&quot;&gt;wiki&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Pantheon Greeter&lt;/strong&gt;: Session manager based on LightDM&lt;br&gt;&#xA;  &lt;strong&gt;Wingpanel&lt;/strong&gt;: Top panel, similar in function to GNOME Shell's top panel&lt;br&gt;&#xA;  &lt;strong&gt;Slingshot&lt;/strong&gt;: Application launcher located in WingPanel&lt;br&gt;&#xA;  &lt;strong&gt;Plank&lt;/strong&gt;: Dock (upon which Docky is based)&lt;br&gt;&#xA;  &lt;strong&gt;Switchboard&lt;/strong&gt;: Settings application (or control panel)&lt;br&gt;&#xA;  &lt;strong&gt;Midori&lt;/strong&gt;: Web browser based on WebKitGTK+&lt;br&gt;&#xA;  &lt;strong&gt;Geary&lt;/strong&gt;: Email client written in Vala&lt;br&gt;&#xA;  &lt;strong&gt;Maya&lt;/strong&gt;: Desktop calendar&lt;br&gt;&#xA;  &lt;strong&gt;Noise&lt;/strong&gt;: Audio player&lt;br&gt;&#xA;  &lt;strong&gt;Scratch&lt;/strong&gt;: Simple text editor, comparable to gedit or leafpad&lt;br&gt;&#xA;  &lt;strong&gt;Pantheon Terminal&lt;/strong&gt;: Terminal emulator&lt;br&gt;&#xA;  &lt;strong&gt;Pantheon Files&lt;/strong&gt; (formerly called Marlin): File manager     &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Apps that are compatible with Ubuntu 14.04 LTS should work just as well on elementary OS Freya&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Recommended reading&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3150/can-i-install-ubuntu-based-applications-on-elementary&quot;&gt;Can I install Ubuntu based applications on Elementary?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-17T10:37:40.047" LastActivityDate="2015-12-17T10:37:40.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3589" PostTypeId="2" ParentId="2193" CreationDate="2015-12-17T12:50:15.533" Score="1" Body="&lt;p&gt;I do searches differently, perhaps run &quot;sudo updatedb&quot; then follow with &quot;sudo locate config.json&quot;&#xA;This should locate the file if it was generated.&lt;/p&gt;&#xA;" OwnerUserId="3478" LastActivityDate="2015-12-17T12:50:15.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3590" PostTypeId="1" CreationDate="2015-12-17T13:30:57.597" Score="3" ViewCount="663" Body="&lt;p&gt;I tried to install elementary OS on my Dell Latitude D631 but failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the beginning of installation I have some very fast warnings and after only letter E in circle. Laptop is stopping in this position and nothing happens except letter E on screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Dell Latitude D631 with AMD Turion 64 X2 TL-60 2GHz and SSD disk.&#xA;elementary OS elementaryos-stable-0.3.1-amd64 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I could not find my DELL Latitude D631 at Ubuntu Desktop certified hardware list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does it mean I have to be with Windows all the time on this laptop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you! &lt;/p&gt;&#xA;" OwnerUserId="3482" LastActivityDate="2016-03-10T03:05:07.673" Title="Can not install elementary OS on DELL D631" Tags="|system-installation|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3591" PostTypeId="1" CreationDate="2015-12-17T13:32:39.423" Score="6" ViewCount="252" Body="&lt;p&gt;I read &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3146/1181&quot;&gt;THIS&lt;/a&gt; answer that was really good on how to change the keyboard layout with Left Ctrl + Left Shift, but when I use&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Ctrl Shift C (to copy on terminals)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;and Ctrl Shift V (to paste on terminals)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;the keyboard layout changes and I cannot perform the copy/paste action. In Elementary Luna, which I had previously, It would only change the Layout ON KEY UP. Hence, it would not conflict with Ctrl + Shift + (whatever key). And on Freya, according to that answer, it is ON KEY DOWN.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any chance to make it work like Luna, and the key combination Left Shift + Left Ctrl take effect only ON KEY UP?&lt;/p&gt;&#xA;" OwnerUserId="1181" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-06T14:46:57.480" Title="Keyboard Layout shortcut conflict" Tags="|release-freya|keyboard-shortcuts|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3592" PostTypeId="2" ParentId="3558" CreationDate="2015-12-17T15:13:47.583" Score="1" Body="&lt;p&gt;ok I've done boot-repair from a live-usb and now in the grub menu i've these options to choose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do i have to do in order to access to Windows?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also i think i've forgotten to disable Secure Boot at the beginning, is it still necessary after boot-repair.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[SOLVED] better than i thought, it was the first one &quot;Windows UEFI recovery bootmgfw.efi&quot; (don't know why but it works)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks everyone for all the support.&lt;/p&gt;&#xA;" OwnerUserId="3432" LastEditorUserId="3432" LastEditDate="2015-12-18T10:35:47.953" LastActivityDate="2015-12-18T10:35:47.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3595" PostTypeId="1" CreationDate="2015-12-17T17:38:16.473" Score="3" ViewCount="152" Body="&lt;p&gt;I'm trying to make juniper network connect work on the 64 bit version of elementary OS.&#xA;Juniper requires 32 bit libraries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions for Ubuntu versions are:   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Ubuntu 12.04&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get –y install ia32-libs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Ubuntu 13.10&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libstdc++6:i386 lib32z1 lib32ncurses5 lib32bz2-1.0 libxext6:i386 libxrender1:i386 libxtst6:i386 libxi6:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Ubuntu 14.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install 32bit libraries&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libstdc++6:i386 lib32z1 lib32ncurses5 lib32bz2-1.0 libxext6:i386 libxrender1:i386 libxtst6:i386 libxi6:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;============================&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -i --force-architecture ./libstdc++6_4.8.4-2ubuntu1~14.04_i386.deb&#xA;dpkg: warning: overriding problem because --force enabled:&#xA;dpkg: warning: package architecture (i386) does not match system (amd64)&#xA;Selecting previously unselected package libstdc++6:i386.&#xA;(Reading database ... 120275 files and directories currently installed.)&#xA; Preparing to unpack .../libstdc++6_4.8.4-2ubuntu1~14.04_i386.deb ...&#xA; De-configuring libstdc++6:amd64 (4.8.2-19ubuntu1) ...&#xA; Unpacking libstdc++6:i386 (4.8.4-2ubuntu1~14.04) ...&#xA; dpkg: error processing package libstdc++6:i386 (--install):&#xA; package libstdc++6:i386 4.8.4-2ubuntu1~14.04 cannot be configured  because libstdc++6:amd64 is at a different version (4.8.2-19ubuntu1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But this looks like it didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone successfully installed this?&#xA;Any help would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jamie Aylward&lt;/p&gt;&#xA;" OwnerUserId="3489" LastEditorUserId="2708" LastEditDate="2015-12-18T02:08:41.070" LastActivityDate="2015-12-18T06:52:22.280" Title="Installing Juniper network connect in 64 bit elementary OS" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3596" PostTypeId="2" ParentId="488" CreationDate="2015-12-17T20:57:47.003" Score="1" Body="&lt;h1&gt;For most applications:&lt;/h1&gt;&#xA;&lt;p&gt;This is not a feature of elementary.&lt;/p&gt;&#xA;&lt;p&gt;Though &lt;em&gt;technically&lt;/em&gt;, you could enable the appmenu indicator (I've tried this before), it leads to a misaligned clock, which of course would not be a welcome result.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;For those that support it:&lt;/h1&gt;&#xA;&lt;p&gt;Some applications allow you to hide the menu in their preferences. In such cases, you can simply disable or hide the menu in this manner.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;For application that do not support it:&lt;/h1&gt;&#xA;&lt;p&gt;You can report a bug to the application developer requesting this feature (hiding the menu). However, do not &lt;em&gt;expect&lt;/em&gt; this to change, as many applications have good reason for having a visible menu bar.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;For example:&lt;/strong&gt; GIMP and Inkscape.&lt;/p&gt;&#xA;" OwnerUserId="242" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-17T20:57:47.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3597" PostTypeId="1" CreationDate="2015-12-18T00:35:27.873" Score="0" ViewCount="89" Body="&lt;p&gt;Elementary is sorely lacking in ease of use beyond opening applications. Something as simple as running a shell script ought to work like it does in any other distro, but elementary fails at it. Trying to cd to the directory containing the script gives me a &quot;no such file or directory&quot; message. Now I know there is a damn directory there because I am looking at it in the file browser, so don't lie to me, Freya. I like the clean desktop environment, but when I am locked out of all but the most basic functionality, I am ready to storm away in frustration.&lt;/p&gt;&#xA;" OwnerUserId="3491" LastActivityDate="2015-12-18T06:48:55.970" Title="Trying to run a simple shell script to install VirtualBox Guest Additions" Tags="|bash|" AnswerCount="1" CommentCount="2" ClosedDate="2015-12-18T11:17:35.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="3598" PostTypeId="2" ParentId="3514" CreationDate="2015-12-18T02:34:28.040" Score="1" Body="&lt;p&gt;You can't install grub UEFI and grub PC in the same time I think (I'm not totally sure about it). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First check in your BIOS settings of your efi pc if you can enbale legacy support. On my computer I can't boot anything exept a live usb with legacy enbaled. Both Windows, ubuntu mate and elementary os where installed with efi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a dual boot with Ubuntu MATE and Windows 10 on my UEFI laptop, and elementary fully installed (not live USB) on a usb 3 external hard drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are using a live USB that should work fine on both efi and legacy (works for me with ubuntu and haven't tried elementary)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have two options to boot : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the Ubuntu MATE grub installed on my laptop. I added a GRUB entry by running boot repair from Ubuntu MATE with the external hard drive plugged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can also use super GRUB22 disk burned on a USB stick and boot from it. This supports all platforms and all computers, and auto detect all OSs. You just have to boot from it and choose your OS. You need to have both your usb drive with elementary and your usb drive with super GRUB22 disk plugged in, but once booted, you can unplug super GRUB2 disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If in any moment you need to install grub somewhere else or reinstall it, run boot repair : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3326" LastEditorUserId="3757" LastEditDate="2016-04-04T14:17:22.990" LastActivityDate="2016-04-04T14:17:22.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3599" PostTypeId="2" ParentId="2504" CreationDate="2015-12-18T02:45:17.477" Score="1" Body="&lt;p&gt;Probably a codec problem. I had the same on elementary live usb. During your installation, did you check the box &quot;install proprietary software&quot;? What is the extention of your music files? Does it works with a .ogg file?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install evrithing you might need by installing ubuntu-restricted-extras. Do it from the software center or run : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it still don't work learn about installing the codec for your format, or different ways to do that.&lt;/p&gt;&#xA;" OwnerUserId="3326" LastActivityDate="2015-12-18T02:45:17.477" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3601" PostTypeId="2" ParentId="3597" CreationDate="2015-12-18T06:48:55.970" Score="2" Body="&lt;p&gt;Just for interests sake - could you type history and put the last commands down on here to see where you went wrong, or why the system did that?&#xA;thanks&lt;/p&gt;&#xA;" OwnerUserId="3478" LastActivityDate="2015-12-18T06:48:55.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3602" PostTypeId="2" ParentId="3595" CreationDate="2015-12-18T06:52:22.280" Score="-2" Body="&lt;p&gt;Hi Have you tried the following mentioned on a ubuntu forum:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;down vote&#xA;accepted&#xA;Solution for Ubuntu 11.10 or Later&#xA;Since Ubuntu 11.10 it shouldn’t be necessary anymore to use getlibs or some other workaround. The package system on 64 bit systems is now able to manage 32 bit libraries in parallel to the 64 bit libraries. You can even easily install complete applications with all their dependencies now!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply add :i386 to the name of the package you would like to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, I needed a 32 bit version of Java 7 and could install it (along with all its dependencies) simply by running:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install openjdk-7-jdk:i386&lt;/p&gt;&#xA;" OwnerUserId="3478" LastActivityDate="2015-12-18T06:52:22.280" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3603" PostTypeId="1" CreationDate="2015-12-18T08:00:21.903" Score="2" ViewCount="1269" Body="&lt;p&gt;I'm testing Freya in live mode but on my Asus X555 laptop the touchpad is not recognized. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found some tutorial to install Focaltech driver, anyway if I run xinput list from the command line i don't see any Focaltech emulation mode. It just show Virtual Core XTEST Pointer. How can i fix it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 1:&lt;/strong&gt;&#xA;I've just tried with a persistent USB mode. Installed Focaltech drivers and nothing has changed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 2&lt;/strong&gt;&#xA;This is the output from xinput list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ Microsoft Microsoft(R) Compact Optical Mouse  id=12   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ USB2.0 VGA UVC WebCam                     id=9    [slave  keyboard (3)]&#xA;    ↳ Asus WMI hotkeys                          id=10   [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=11   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;uname -r&lt;/code&gt; returns &lt;code&gt;3.19.0-39-generic&lt;/code&gt;&#xA;And this is the output from &lt;code&gt;lspci&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Device 1904 (rev 08)&#xA;00:02.0 VGA compatible controller: Intel Corporation Device 1916 (rev 07)&#xA;00:04.0 Signal processing controller: Intel Corporation Device 1903 (rev 08)&#xA;00:14.0 USB controller: Intel Corporation Device 9d2f (rev 21)&#xA;00:14.2 Signal processing controller: Intel Corporation Device 9d31 (rev 21)&#xA;00:15.0 Signal processing controller: Intel Corporation Device 9d60 (rev 21)&#xA;00:15.1 Signal processing controller: Intel Corporation Device 9d61 (rev 21)&#xA;00:16.0 Communication controller: Intel Corporation Device 9d3a (rev 21)&#xA;00:17.0 SATA controller: Intel Corporation Device 9d03 (rev 21)&#xA;00:1c.0 PCI bridge: Intel Corporation Device 9d10 (rev f1)&#xA;00:1c.4 PCI bridge: Intel Corporation Device 9d14 (rev f1)&#xA;00:1c.5 PCI bridge: Intel Corporation Device 9d15 (rev f1)&#xA;00:1f.0 ISA bridge: Intel Corporation Device 9d48 (rev 21)&#xA;00:1f.2 Memory controller: Intel Corporation Device 9d21 (rev 21)&#xA;00:1f.3 Audio device: Intel Corporation Device 9d70 (rev 21)&#xA;00:1f.4 SMBus: Intel Corporation Device 9d23 (rev 21)&#xA;02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)&#xA;03:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 3&lt;/strong&gt;&#xA;I've also tried Ubuntu 15.10 live mode, with this distro the touchpad works as a mouse, no other gestures like 2-finger scrolling. The model name shown by xinput list is &lt;code&gt;ELAN1000:00 04F3:0401&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="3494" LastEditorUserId="3757" LastEditDate="2016-05-06T01:31:16.983" LastActivityDate="2016-05-06T01:31:16.983" Title="ASUS X555U Touchpad not working" Tags="|release-freya|touchpad|asus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3604" PostTypeId="2" ParentId="3581" CreationDate="2015-12-18T14:14:56.197" Score="1" Body="&lt;p&gt;It seems to me that you have:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;installed VLC from a PPA&lt;/li&gt;&#xA;&lt;li&gt;removed VLC. That will live some of its dependencies installed.&lt;/li&gt;&#xA;&lt;li&gt;removed that PPA&lt;/li&gt;&#xA;&lt;li&gt;tried to install VLC again not from that PPA without cleaning residues.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;To fix that:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;It is recommended to run &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; after removing a package to remove auto installed dependencies related to it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can also use &lt;code&gt;ppa-purge&lt;/code&gt; to downgrade all packages from that ppa&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; &lt;em&gt;if you have removed the PPA, add it again, Otherwise &lt;code&gt;ppa-purge&lt;/code&gt; will not work&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge &amp;lt;ppa:...&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Another way, Use &lt;code&gt;synaptic&lt;/code&gt; set filter by origin then remove the package from that PPA all at one or downgrade grade them one by one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you forgot the name of a removed PPA, you find them in Origin:&lt;code&gt;local&lt;/code&gt; same as locally installed debian packages.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2015-12-18T15:17:44.960" LastActivityDate="2015-12-18T15:17:44.960" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3605" PostTypeId="1" CreationDate="2015-12-18T14:53:22.850" Score="1" ViewCount="152" Body="&lt;p&gt;I have a PC with elementary OS only and after loading screen and elementary logo there is just a black screen instead of login screen. My keyboard acts like it's unplugged, it doesn't respond to num lock or scroll lock or caps lock button, all diodes are off. HDD led in my pc doesn't show any hard drive actions. When I boot up with the Linux kernel 3.19.0.39 everything works just fine. How can I diagnose what's going on, or how can I try to fix the newer kernel?&lt;/p&gt;&#xA;" OwnerUserId="3497" LastEditorUserId="5565" LastEditDate="2016-10-07T02:26:22.153" LastActivityDate="2016-10-07T02:26:22.153" Title="Black screen with Linux kernel 3.19.0.41" Tags="|boot|keyboard|kernel|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3606" PostTypeId="2" ParentId="3605" CreationDate="2015-12-18T15:37:05.020" Score="2" Body="&lt;p&gt;NVIDIA drivers were causing the problem. I removed drivers completely with --purge flag and then installed current drivers again and now everything works. &lt;br&gt;Here's how to do this: &lt;a href=&quot;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&quot;&gt;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3497" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-18T15:37:05.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3607" PostTypeId="1" AcceptedAnswerId="5300" CreationDate="2015-12-19T00:10:49.860" Score="0" ViewCount="576" Body="&lt;p&gt;I have an older Apple Airport Express device and would like to stream my music to it using Banshee. I've followed these instructions:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://blogs.gnome.org/danni/2009/10/22/streaming-to-airtunes-airport-express-with-pulseaudio/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blogs.gnome.org/danni/2009/10/22/streaming-to-airtunes-airport-express-with-pulseaudio/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and it basically works, the AEX is detected and there's music coming out of my speakers. :) However, the stream constantly stutters, so I thought I'd change the buffer size. I found and followed these instructions and edited the /etc/pulse/daemon.conf file:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://forums.linuxmint.com/viewtopic.php?f=42&amp;amp;t=44862&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forums.linuxmint.com/viewtopic.php?f=42&amp;amp;t=44862&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;But alas, it still doesn't work. When I calculate my buffer size according to the mentioned article,&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;default-fragments = 2&lt;/p&gt;&#xA;&lt;p&gt;default-fragment-size-msec = 23&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;it is still stuttering. I then augmented the default fragment size to 100, 200, 300 etc. up to 500 msec. The result is, it gets better. At around 350 msec and more the stream has some latency, but basically works without any drop-outs - but only for a couple of minutes, then the stuttering returns. Also, when I skip to the next track it stutters immediately.&lt;/p&gt;&#xA;&lt;p&gt;The third comment (by theAntiBob) to the article in the Mint Forum mentions that changing the buffer size alone won't do unless you change the timer-based scheduling to being disabled in /etc/pulse/default.pa by adding tsched=0 to the end of the line load-module module-udev-detect. However, I tried and that doesn't seem to work either resp. to have any effect.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-06-08T14:13:19.770" Title="How to set up Pulse Audio to stream to Airport Express and to fix stuttering stream?" Tags="|release-freya|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3608" PostTypeId="1" CreationDate="2015-12-19T00:45:22.103" Score="1" ViewCount="47" Body="&lt;p&gt;I love Elementary OS. Just installed the recent update. Did the reboot and got the &quot;Mountall could not conect to Plymouth&quot; screen froze at this point. I was able to open another tty and removed the NVIDIA drivers but left nouveau intact. On reboot the system can't find nouveau and the screen freezes. I cannot get to another tty. I can get to recovery mode and system prompt # via recovery but get errors about files being locked apt-get update gets errors about being locked. I don't want to start from scratch re-installing elementary. Any advice on how to get my elementary back. &lt;/p&gt;&#xA;" OwnerUserId="3501" LastActivityDate="2015-12-19T00:45:22.103" Title="Recent Software update" Tags="|system|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3609" PostTypeId="1" AcceptedAnswerId="3614" CreationDate="2015-12-19T01:39:21.927" Score="1" ViewCount="822" Body="&lt;p&gt;Well, still working on the problem of installing elementary on a Bay Trail machine (32-bit bootloader, 64-bit processor). Unfortunately 0.3.2 doesn't support 32-bit UEFI any more, so I'd like to try with 0.3.1. Is the 0.3.1 ISO still available anywhere?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Barring that, I'll probably just use Debian with the Pantheon DE...)&lt;/p&gt;&#xA;" OwnerUserId="3222" LastActivityDate="2016-04-26T17:23:36.393" Title="Can I still download the 0.3.1 iso anywhere?" Tags="|system-installation|boot|uefi|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3610" PostTypeId="2" ParentId="3609" CreationDate="2015-12-19T01:50:05.077" Score="0" Body="&lt;p&gt;you may try this torrent&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://kat.cr/elementary-os-0-3-1-64-bit-t11632101.html&quot; rel=&quot;nofollow&quot;&gt;https://kat.cr/elementary-os-0-3-1-64-bit-t11632101.html&lt;/a&gt; &#xA;or this &lt;a href=&quot;https://kat.cr/elementary-os-freya-32bit-t10490137.html&quot; rel=&quot;nofollow&quot;&gt;https://kat.cr/elementary-os-freya-32bit-t10490137.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3502" LastActivityDate="2015-12-19T01:50:05.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3611" PostTypeId="1" AcceptedAnswerId="3650" CreationDate="2015-12-19T02:06:24.157" Score="1" ViewCount="2105" Body="&lt;p&gt;OK, so I messed around with PulseAudio and purged all of it. Now my regular sound settings do not work anymore. neither can I turn up and down the volume with the respective keys, nor do the sound settings show any devices (neither input nor output). The sound symbol does not show in the menu bar anymore either. I can hear sound though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess I accidentally uninstalled a package that is needed. Does anybody know which packages I have to reinstall?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="75" LastEditDate="2015-12-19T17:21:34.163" LastActivityDate="2022-08-25T10:07:42.427" Title="Sound settings missing after removing PulseAudio" Tags="|release-freya|audio|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3612" PostTypeId="2" ParentId="3611" CreationDate="2015-12-19T02:27:50.760" Score="2" Body="&lt;p&gt;PulseAudio is the sound server. It is necessary for all of the functions that are now broken on your system. You need to reinstall it.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-19T02:27:50.760" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3614" PostTypeId="2" ParentId="3609" CreationDate="2015-12-19T06:08:34.017" Score="3" Body="&lt;p&gt;0.3.1 doesn't support 32bit UEFI either. There is an open ticket for supporting 32bit UEFI in the future &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1519733&quot; rel=&quot;nofollow&quot;&gt;on Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-19T06:08:34.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3615" PostTypeId="1" CreationDate="2015-12-19T06:25:35.673" Score="10" ViewCount="27702" Body="&lt;p&gt;I am using elementary OS Freya and tried to install some graphic drivers and update existing drivers, after the re-start I get black screen, but still I can access command line from recovery mode, how can I re-set my graphic drivers ?&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="2708" LastEditDate="2015-12-28T16:05:12.507" LastActivityDate="2015-12-28T16:41:25.043" Title="How to reset graphic drivers from command line" Tags="|release-freya|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3616" PostTypeId="1" AcceptedAnswerId="4252" CreationDate="2015-12-19T10:45:15.010" Score="7" ViewCount="444" Body="&lt;p&gt;I have installed LibreOffice 5 using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However in Impress the 3D transitions (eg Rochade) are not installed.  I've used Ubuntu for years, and seem to remember this had something to do with OpenGL. How can I get these transitions on elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="3507" LastEditorUserId="45" LastEditDate="2016-02-03T18:50:26.710" LastActivityDate="2016-04-24T05:48:46.477" Title="How can I get 3D transitions for LibreOffice Impress?" Tags="|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3617" PostTypeId="1" AcceptedAnswerId="3618" CreationDate="2015-12-19T15:56:04.733" Score="4" ViewCount="5076" Body="&lt;p&gt;I want to change my keyboard shortcut for the multitasking view. I want instead of the key combination 'windows' + 'arrow down' only the'windows-key'. Is it possible to do this? And how can I do it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="3510" LastActivityDate="2015-12-19T18:59:59.257" Title="How can i change keyboard shortcuts?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3618" PostTypeId="2" ParentId="3617" CreationDate="2015-12-19T18:59:59.257" Score="4" Body="&lt;p&gt;As &lt;a href=&quot;https://elementaryos.stackexchange.com/users/308/cassidy-james&quot;&gt;Cassidy James&lt;/a&gt; said &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/27/can-i-change-the-applications-dropdown-shortcut-to-super-not-altf2?rq=1#comment1001_98&quot;&gt;over here&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Do note that &lt;strong&gt;this will mess with all other shortcuts that use Super&lt;/strong&gt; and is the reason it's not the default. i.e. Super left/right to switch workspaces gets weird because now the app launcher is opening, super+drag to move windows around gets messed up, etc&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;That said, you can open &lt;code&gt;System Settings&lt;/code&gt;, open &lt;code&gt;Keyboard&lt;/code&gt;, and then you should be in the &lt;code&gt;Shortcuts&lt;/code&gt; tab already. Click on what you want to change and set it to whatever you want, although it may require at least two keys this way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pBx04.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pBx04.png&quot; alt=&quot;keyboards plug&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2015-12-19T18:59:59.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3619" PostTypeId="2" ParentId="3591" CreationDate="2015-12-19T19:13:48.203" Score="3" Body="&lt;p&gt;The problem with using &lt;strong&gt;modifiers&lt;/strong&gt; (&lt;kbd&gt;shift&lt;/kbd&gt;, &lt;kbd&gt;ctrl&lt;/kbd&gt;, &lt;kbd&gt;alt&lt;/kbd&gt;, &lt;kbd&gt;super&lt;/kbd&gt;) is that they are modifiers, and not designed to actually change something themselves. I would suggest that a far easier fix would be to simply assign the shortcut to , &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; or something similar. Basically, &lt;strong&gt;include a non-modifier key&lt;/strong&gt; in all your shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-12-19T19:13:48.203" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3620" PostTypeId="2" ParentId="1231" CreationDate="2015-12-19T22:51:17.953" Score="1" Body="&lt;p&gt;A lot of EFI/UEFI issues have been fixed in Elementary os 0.3.2, If you was not using this new update try it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You shoudn't need to add anything to your iso. Is your linux installed without grub or not installed at all becose of grub ? Can you boot with super grub2 disk installed on a usb? if yes use boot repair from line usb or learn about rescatux witch is a distro able to install and fix grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have performed with sucess an UEFI install or elementary OS, and an other one on external hard drive where grub failed to install but I can boot from super grub2 disk&lt;/p&gt;&#xA;" OwnerUserId="3326" LastActivityDate="2015-12-19T22:51:17.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3621" PostTypeId="2" ParentId="2508" CreationDate="2015-12-19T22:54:44.573" Score="0" Body="&lt;p&gt;To remove a package use ubuntu software center or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To reinstall : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3326" LastActivityDate="2015-12-19T22:54:44.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3622" PostTypeId="1" CreationDate="2015-12-19T23:48:21.997" Score="3" ViewCount="223" Body="&lt;p&gt;I've used Luna for a couple of years, and I got used to Luna's File Manager. The way we search for a file is similar to nautilus. We type, the search bar is at the bottom, and the first occurence of the file is selected. We can then press Tab, and navigate with the arrows. On Freya, this is different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The search bar is mixed with the path's bar. This is horrible because if we want to clear our search string, holding backspace, once it clears all the characters, it starts moving us to the parent directory. Also, all the occurences of the search are selected as we type.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really can't get used to it. Is there a way to downgrade the file manager to the version used in Luna?&lt;/p&gt;&#xA;" OwnerUserId="1181" LastActivityDate="2015-12-20T09:58:02.770" Title="Freya - Switch File Manager to Luna's" Tags="|release-freya|pantheon-files|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3623" PostTypeId="2" ParentId="2163" CreationDate="2015-12-20T01:49:40.867" Score="1" Body="&lt;p&gt;Learn about boot repair and super grub2 disk, and eventually rescatux. For an old mac I recommand to install rEFIt from mac os X if you still have it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you boot from live usb? If yes I think the best choice for you wood be to format your disk ( Create new GPT partition table, and loose all the data on the computer!) and then clean install elementary os 0.3.2 . If you have 0.3 or 0.3.1 downloaded it is important to download again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An other thing thing that you can try is pressing alt or C during boot process, you will need a wired keyboard (I think).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently using an old macbook.&lt;/p&gt;&#xA;" OwnerUserId="3326" LastActivityDate="2015-12-20T01:49:40.867" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3624" PostTypeId="2" ParentId="3622" CreationDate="2015-12-20T09:58:02.770" Score="2" Body="&lt;p&gt;Simple answer: No. Luna's version of Pantheon Files depends on libraries that are not available in Freya (or, to be more specific, the corresponding version of a library is not available anymore).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon Files has undergone a lot of development since Luna anyway, so you would be losing crucial bug fixes.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2015-12-20T09:58:02.770" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3625" PostTypeId="1" CreationDate="2015-12-20T16:28:43.833" Score="1" ViewCount="733" Body="&lt;p&gt;I installed Graphics drivers support.amd.com and it worked fine, after reboot elementary OS automatically installed some updates related to openGL and after that desktop seems to be broken, there is no Dock and wingpanel&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rHZ1v.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rHZ1v.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/H2mxd.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H2mxd.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to rollback to the previous update?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="34" LastEditDate="2015-12-31T13:14:37.867" LastActivityDate="2017-01-17T07:48:20.683" Title="Dock and wing panel missing after update" Tags="|wingpanel|plank|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3626" PostTypeId="1" CreationDate="2015-12-20T17:23:12.467" Score="2" ViewCount="213" Body="&lt;p&gt;Something went wrong with my installation of elementary OS and I don't have a second operating system on this laptop. I have Kali Linux ready to install on a usb drive, but the only problem is my entire hard drive is encrypted with LUKS. Now, because my OS is jacked up, it launches me directly to BusyBox v1.21.1. How can I format the hard drive through the shell and be done with this whole problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note. I only have a select number of commands to choose from. It doesnt appear to be a standard shell.&lt;/p&gt;&#xA;" OwnerUserId="3513" LastEditorUserId="34" LastEditDate="2015-12-31T13:16:36.623" LastActivityDate="2015-12-31T13:16:36.623" Title="How can I format my fully encrypted drive through BusyBox?" Tags="|disk-management|format|" AnswerCount="0" CommentCount="1" ClosedDate="2015-12-31T14:17:06.260" ContentLicense="CC BY-SA 3.0" />
  <row Id="3628" PostTypeId="2" ParentId="3484" CreationDate="2015-12-20T19:44:51.763" Score="2" Body="&lt;p&gt;Open System Settings and select Start Up Applications. Click Add. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Name call it &quot;Login Sound&quot;&lt;/li&gt;&#xA;&lt;li&gt;In Command write &lt;code&gt;/usr/bin/canberra-gtk-play --file=YOURFILE&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In Comment &quot;Play sound on user login&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Obviously, you can use a different name and comment, and replace YOURFILE with the path for your sound.&lt;/p&gt;&#xA;" OwnerUserId="644" LastEditorUserId="68" LastEditDate="2016-01-20T01:42:03.993" LastActivityDate="2016-01-20T01:42:03.993" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3629" PostTypeId="1" CreationDate="2015-12-20T20:27:17.780" Score="9" ViewCount="281" Body="&lt;p&gt;I recently installed elementary OS 0.3.2 64-bit and am experiencing a weird keyboard behavior when typing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a few seconds when everything is OK,  the following happens: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Characters are  not displayed immediately, I need to type the next character before the one before appears. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not a lag - it simple waits for next keyboard event. Restarting usually helps but only for a short time, then the problem will re-appear.&#xA;I made a few experiments end research and found:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;it is not a hardware problem (I tested more keyboards)&lt;/li&gt;&#xA;&lt;li&gt;it affects all users&lt;/li&gt;&#xA;&lt;li&gt;many programs are &lt;strong&gt;not&lt;/strong&gt; affected, be example Chrome, xterm, Atom editor etc.&lt;/li&gt;&#xA;&lt;li&gt;it seems that most of affected programs are Elementary defaults by example scratch editor, terminal, etc. But also Guake terminal is affected.&lt;/li&gt;&#xA;&lt;li&gt;Live version booted from USB is &lt;strong&gt;not&lt;/strong&gt; affected at all.&lt;/li&gt;&#xA;&lt;li&gt;Slow keys, bounce keys and similar functions of Universal access are &lt;strong&gt;Off&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Does anybody have some idea?&lt;/p&gt;&#xA;" OwnerUserId="3514" LastEditorUserId="3757" LastEditDate="2016-04-04T02:11:23.993" LastActivityDate="2016-09-15T19:59:24.463" Title="Keyboard delay - missing last character" Tags="|keyboard|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3630" PostTypeId="1" CreationDate="2015-12-20T23:55:09.410" Score="2" ViewCount="126" Body="&lt;p&gt;I'm using Fyeya 0.3.2 (I guess this is the most up to date version)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However recently I'm facing a issue with the panel icons. Including network client. Panel icons get more than 3 minutes to load. I assume this happens after an OS update which performed recently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The delays panel appications are&lt;/p&gt;&#xA;&#xA;&lt;p&gt;clipbord, Keyboard layout switcher, spideroak client, vol, &#xA;network, blutooth, battery&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What would be the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a fresh developer and eager to look in to the code also. So if anyone point out me where to find the panel code. Thats also appreciated.&lt;/p&gt;&#xA;" OwnerUserId="3517" LastActivityDate="2016-01-20T01:55:24.530" Title="My panel icons get more than 3 minutes to load" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="2" ClosedDate="2016-01-22T10:03:24.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="3632" PostTypeId="1" CreationDate="2015-12-21T05:53:02.923" Score="1" ViewCount="68" Body="&lt;p&gt;I'm newish to linux based, so you may have to explain like I'm 5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my wifi card exists, I can choose my network and enter my password, but then network failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My ethernet exists, I can choose it, but then network failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can only connect to wifi via USB tether. Please help.&lt;/p&gt;&#xA;" OwnerUserId="3519" LastActivityDate="2017-07-06T13:18:46.920" Title="Fresh Install on brand new computer, No network connectivity" Tags="|networking|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3633" PostTypeId="1" AcceptedAnswerId="3638" CreationDate="2015-12-21T08:16:24.490" Score="1" ViewCount="1784" Body="&lt;p&gt;I need to know my bandwidth and consumed internet bandwidth and downloaded data size like that.  I tried this, but its not getting total downloaded packs size. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/532424/how-to-monitor-bandwidth-usage&quot;&gt;AskUbuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-03-30T08:39:03.557" Title="How Can I Monitor Internet Usage?" Tags="|release-freya|applications|monitoring|internet|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3634" PostTypeId="1" CreationDate="2015-12-21T11:11:53.313" Score="1" ViewCount="13" Body="&lt;p&gt;I know how to install &lt;strong&gt;&lt;em&gt;Ubuntu&lt;/em&gt;&lt;/strong&gt; along side &lt;strong&gt;&lt;em&gt;Windows&lt;/em&gt;&lt;/strong&gt;,but I do not know how to install &lt;strong&gt;&lt;em&gt;Elementary OS&lt;/em&gt;&lt;/strong&gt; alongside &lt;strong&gt;&lt;em&gt;Windows&lt;/em&gt;&lt;/strong&gt; &#xA;So,Guys Please Help Me&#xA;Tell Me If the installation for dual booting &lt;strong&gt;&lt;em&gt;Ubuntu&lt;/em&gt;&lt;/strong&gt; with &lt;strong&gt;&lt;em&gt;Windows&lt;/em&gt;&lt;/strong&gt;&#xA;is same for the &lt;strong&gt;&lt;em&gt;Elementary OS&lt;/em&gt;&lt;/strong&gt;&#xA;Thank You&lt;/p&gt;&#xA;" OwnerUserId="3523" LastActivityDate="2015-12-21T11:11:53.313" Title="Installation Problem" Tags="|system-installation|dual-boot|microsoft-windows|" AnswerCount="0" CommentCount="0" ClosedDate="2015-12-21T15:33:12.800" ContentLicense="CC BY-SA 3.0" />
  <row Id="3635" PostTypeId="1" AcceptedAnswerId="3636" CreationDate="2015-12-21T12:07:15.100" Score="2" ViewCount="211" Body="&lt;p&gt;How do I manually add indentations in scratch ? auto indentation does not seem to be working for me. I have tried &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;F&lt;/kbd&gt; and right arrow key like on some other text editors. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug? any help would be appreciated&lt;/p&gt;&#xA;" OwnerUserId="2887" LastEditorUserId="2708" LastEditDate="2015-12-21T12:23:51.350" LastActivityDate="2015-12-21T14:06:47.613" Title="how can I add indents to code in scratch manually or automatically?" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3636" PostTypeId="2" ParentId="3635" CreationDate="2015-12-21T14:06:47.613" Score="3" Body="&lt;p&gt;You can indent manually in Scratch by selecting several lines and pressing the &lt;kbd&gt;Tab&lt;/kbd&gt; key, or pressing &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt;. Automatic Indentation should occur, where every new line is inserted with the same indentation as the previous line. Automatic Indentation will not actually indent based on brackets or code you write.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-12-21T14:06:47.613" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3637" PostTypeId="1" CreationDate="2015-12-21T22:00:57.370" Score="1" ViewCount="123" Body="&lt;p&gt;Jumped through all of the hurdles to boot from thumb drive on this machine. Ran the &quot;live&quot; version instead of the install and am glad I did. I cannot find an option to &quot;rotate display&quot; for the display settings. This is a 2:1 computer that Walmart is selling hand over fist. It doesn't seem like any Linux distro has the &quot;orientation&quot; driver for lack of a better word. Your distro claimed good touch support, so I thought I would try it. I could get by with the lack of accurate touch support (mostly due to lack of orientation driver) but I &lt;em&gt;must&lt;/em&gt; be able to rotate the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a work around for this?&lt;/p&gt;&#xA;" OwnerUserId="3529" LastActivityDate="2015-12-21T22:00:57.370" Title="rotate display on nextbook Flex" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3638" PostTypeId="2" ParentId="3633" CreationDate="2015-12-21T22:09:58.597" Score="0" Body="&lt;p&gt;Have a look on &quot;Conky&quot;. At the beginning it seems not to be easy to configure - but there are many templates you can use. &lt;a href=&quot;http://www.noobslab.com/2012/07/conky-collection-for-ubuntulinux.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you can find many templates - of course you can adjust them to your needs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also usefull is &quot;Conky Manager&quot; (&lt;a href=&quot;http://ubuntuguide.net/install-conky-manager-2-0-2-ubuntu-1404&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuguide.net/install-conky-manager-2-0-2-ubuntu-1404&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To have an idea how a conky can look like, see my desktop:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/wxRSY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wxRSY.jpg&quot; alt=&quot;Desktop with customized System-Flair-Conky&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The red recangle shows the current up- / down-speed and the total size of uploaded / downloaded data. These values will be resetted after reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;@Daniel: Sorry for posting a comment rather than as an answer :)&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2015-12-21T22:09:58.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3639" PostTypeId="1" CreationDate="2015-12-21T22:12:21.333" Score="3" ViewCount="205" Body="&lt;p&gt;Is it a Codec issue? &#xA;i just try with Video,VLC, with mplayer, with,i try to convert it with openshot, with avidemux, but it does not work, someone have any suggestions? &#xA;i can play it in mac and windows with quicktime.&lt;/p&gt;&#xA;" OwnerUserId="3530" LastActivityDate="2018-09-11T16:00:19.823" Title="How can i play .MTS videos in elementary OS?" Tags="|applications|vlc|videos|" AnswerCount="1" CommentCount="14" ContentLicense="CC BY-SA 3.0" />
  <row Id="3640" PostTypeId="1" CreationDate="2015-12-21T23:31:40.953" Score="1" ViewCount="68" Body="&lt;p&gt;Hi can anyone help please&lt;/p&gt;&#xA;&#xA;&lt;p&gt;have on different machines installed elementary OS&#xA; but unfortunately  on this one it doesn't work and cant find a Workspace manager&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks&lt;/p&gt;&#xA;" OwnerUserId="3531" LastEditorUserId="3757" LastEditDate="2016-05-05T13:43:20.837" LastActivityDate="2016-05-05T13:43:20.837" Title="missed workspace manager on Version: 0.2.1 &quot;Luna&quot; ( 32-bit )" Tags="|luna|window-manager|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3641" PostTypeId="2" ParentId="3640" CreationDate="2015-12-22T00:19:06.303" Score="2" Body="&lt;p&gt;In Luna, workspaces are only accessible with a keyboard shortcut &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;S&lt;/kbd&gt; or by setting up hot corners. The multitasking view (and its shortcut) was added in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an aside, Luna (0.2.x) no longer receives updates from elementary. You should upgrade to the latest release (0.3.2) to continue receiving updates from elementary.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="37" LastEditDate="2015-12-22T15:29:29.897" LastActivityDate="2015-12-22T15:29:29.897" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3643" PostTypeId="1" AcceptedAnswerId="3660" CreationDate="2015-12-22T05:19:47.297" Score="0" ViewCount="721" Body="&lt;p&gt;I want to change the classic view of applications menu with nice looking one. Here is the default screenshot. I want to replace this with new one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OpWNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OpWNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="2708" LastEditDate="2015-12-23T09:30:28.400" LastActivityDate="2015-12-23T13:47:13.267" Title="How can I change the default applications menu theme- Freya?" Tags="|release-freya|themes|" AnswerCount="1" CommentCount="3" ClosedDate="2015-12-31T14:04:15.670" ContentLicense="CC BY-SA 3.0" />
  <row Id="3645" PostTypeId="1" CreationDate="2015-12-22T16:02:41.160" Score="2" ViewCount="260" Body="&lt;p&gt;Most importantly Files. On empty desktop it launches in the middle, which is ok. But if I have for example chromium open, and I open files, it opens in top left corner which is very annoying. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And also, I have to click Files twice to see the folder. First click opens it in behind of chromium, and only second click opens it to screen???&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TBH I think this behavior just started today. I dont remember changing anything&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Ok, i tried to logout to fix it. Logout button didnt do anything. Then I tried restart, it worked and fixed everything, including logout button. Now everything is good, except my login screen wallpaper randomly changed to the default mountain one (never did that before after restarts). Very weird random behaviour!&lt;/p&gt;&#xA;" OwnerUserId="3536" LastEditorUserId="3536" LastEditDate="2015-12-22T16:07:55.967" LastActivityDate="2015-12-23T00:20:12.090" Title="How to make apps remember window position?" Tags="|files|" AnswerCount="1" CommentCount="2" ClosedDate="2015-12-31T13:58:53.227" ContentLicense="CC BY-SA 3.0" />
  <row Id="3646" PostTypeId="1" CreationDate="2015-12-22T16:04:29.467" Score="3" ViewCount="294" Body="&lt;p&gt;I don't know the exact reason, but whenever I'm watching a video (doesn't matter if it's Youtube or VLC), after some minutes (twenty or so), my CPU usage spikes to 100%. I've been trying to see what is exactly causing it, and the only thing to blame seems to be some processes called kidle_inject:[RANDOM NUMBER]. Now, I've been looking through the internet and it seems it's just some sort of thermal controller for Intel. I'm not sure what's going on out there, but it makes the computer completely unusable. I don't remember experiencing this before. Maybe it's a system update that introduced a bug, I don't know, but is getting really frustrating.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a Lenovo T430, with 8 GB of RAM, Intel Core i5 (Haswell, I think), Intel HD Graphics 4000 and a screen resolution of 1600x900.&lt;/p&gt;&#xA;" OwnerUserId="3537" LastActivityDate="2016-09-18T01:00:24.007" Title="CPU Overload when watching video" Tags="|release-freya|system|codec|intel|performance|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3647" PostTypeId="2" ParentId="3527" CreationDate="2015-12-22T16:27:03.163" Score="1" Body="&lt;p&gt;I have the exact same drive (250gb, 1 month old). I ran same command as you and got &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1073741824 bytes (1,1 GB) copied, 1,29003 s, 832 MB/s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which didn't seem right :D With second try I got&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1073741824 bytes (1,1 GB) copied, 2,28104 s, 471 MB/s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and with third try 543 MB/s.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With reading, I got &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1073741824 bytes (1,1 GB) copied, 2,0356 s, 527 MB/s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;They seem to be in line with specifications. I am sorry I can't help more with your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Is this reliable benchmark? I tried one more time and got 1400 MB/s when writing new file. When overwriting I get those ~500&lt;/p&gt;&#xA;" OwnerUserId="3536" LastEditorUserId="3536" LastEditDate="2015-12-22T16:43:24.747" LastActivityDate="2015-12-22T16:43:24.747" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3648" PostTypeId="1" AcceptedAnswerId="3776" CreationDate="2015-12-22T16:52:59.777" Score="6" ViewCount="6573" Body="&lt;p&gt;After a reinstall of freya 0.3.2 I encountered a weird problem with the language installation. First, after installation there were numerous languages installed that I didn't choose during installation (e.g. Danish, Japanese, Russian...). I then removed the languages I didn't need using the system settings keeping German as the system language and a couple of other languages as additional languages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I would like to install Spanish as an additional language, but it doesn't work. When I click on &quot;Espanol&quot; in the add menu, nothing happens. Also, there is a yellow bar appearing in the top part of the system settings window telling me that &quot;The language is not installed completely&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) I  don't know to which of the installed languages this refers, and&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b) when I click on the button &quot;complete installation&quot;, the yellow bar fades out, but immediately returns with the same message like before. Apparently there is no complemental installation of any of the installed languages. You can notice that German is not installed completely because e.g. the Pantheon Greeter is still in English (whereas before the reinstall of the system it was German)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="2708" LastEditDate="2016-01-01T04:14:13.323" LastActivityDate="2016-01-01T04:14:13.323" Title="How to fix problems with language installation?" Tags="|release-freya|language|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3649" PostTypeId="2" ParentId="3646" CreationDate="2015-12-22T17:48:50.487" Score="1" Body="&lt;p&gt;open a terminal and the command &lt;code&gt;sudo rmmod intel_powerclamp&lt;/code&gt; will remove the powerclamp module from your running system. If that fixes it, you can can enter the following in a terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd /etc/modprobe.d&#xA;sudo su&#xA;echo install intel_powerclamp /bin/true &amp;gt; intel_powerclamp.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to stop it loading when your system restarts.&lt;/p&gt;&#xA;" OwnerUserId="644" LastActivityDate="2015-12-22T17:48:50.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3650" PostTypeId="2" ParentId="3611" CreationDate="2015-12-22T18:59:52.043" Score="1" Body="&lt;p&gt;After reinstalling the system (I suppose just the pulseaudio packages would have done too) the problem was that the config files in my home folder - which I hadn't deleted because I didn't format my home folder - were apparently corrupted and caused a malfunction. Thus, I deleted&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~/.config/pulse&lt;/p&gt;&#xA;&lt;p&gt;~/.gconf/system/pulseaudio&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and restarted the system. And voilà, everything works again. The sound button in the menu bar is back, and I can use keys to control the volume.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-22T19:05:48.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3651" PostTypeId="1" CreationDate="2015-12-22T22:08:02.967" Score="0" ViewCount="599" Body="&lt;p&gt;I am new to this forum and I don't know much about PCs and OS. All I want to do, if possible, is to install elementary OS on my notebook without erasing Windows 10. I would also like to know that after installing elementary OS, is it possible to boot in this OS without a bootable USB drive.&lt;/p&gt;&#xA;" OwnerUserId="3538" LastEditorUserId="68" LastEditDate="2016-01-26T05:40:49.240" LastActivityDate="2016-04-15T02:12:20.110" Title="Is it possible to have Windows 10 and elementary OS installed on my HP notebook at the same time and boot without a USB drive?" Tags="|boot|usb-drive|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3652" PostTypeId="1" CreationDate="2015-12-22T23:54:08.347" Score="2" ViewCount="35" Body="&lt;p&gt;I'm talking about this annoying thing whenever I disconnect from the Internet. It fixes itself when I reconnect to the Internet and I can move it out of the way and still proceed with my activities, but its just annoying: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;[the giant white box in the middle that can't connect to elementary.io for some reason] &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uGSWm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uGSWm.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3539" LastActivityDate="2015-12-22T23:54:08.347" Title="What is the login popup for and how do I disable it?" Tags="|settings|networking|" AnswerCount="0" CommentCount="0" ClosedDate="2015-12-31T13:56:29.600" ContentLicense="CC BY-SA 3.0" />
  <row Id="3653" PostTypeId="2" ParentId="3651" CreationDate="2015-12-23T00:13:26.380" Score="1" Body="&lt;p&gt;I highly recommend you learn a lot more about PC and OS's before you install a Linux distro, but here's a quick premier: &lt;/p&gt;&#xA;&#xA;&lt;h2&gt; A PC is the actual physical laptop/desktop &lt;/h2&gt; &#xA;&#xA;&lt;h3&gt; An OS is the software layer that coordinates all your hardware in order to run applications (like Word, or Google Chrome) &lt;/h3&gt; &#xA;&#xA;&lt;p&gt;&lt;strong&gt;Windows 7/8/10&lt;/strong&gt; is an &lt;strong&gt;OS&lt;/strong&gt;, &lt;strong&gt;Elementary OS&lt;/strong&gt; is also an &lt;strong&gt;OS&lt;/strong&gt;&lt;br&gt;&#xA;&lt;strong&gt;Elementary OS&lt;/strong&gt; is based on the &lt;strong&gt;Ubuntu OS&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now as to install Windows and Elementary OS at the sametime search up Dual Booting and you'll find tutorials on how to install Windows and Elementary OS at the same time, on the same hard drive (or ssd). You'll need a bootable USB Drive or CD/DVD Drive in order to install Elementary OS alongside Windows, but you do not need it in order to boot into Elementary OS &lt;/p&gt;&#xA;" OwnerUserId="3539" LastActivityDate="2015-12-23T00:13:26.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3654" PostTypeId="2" ParentId="3645" CreationDate="2015-12-23T00:20:12.090" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;And also, I have to click Files twice to see the folder. First click opens it in behind of chromium, and only second click opens it to screen???&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thats default behavior for Elementary OS AFAIK&lt;/p&gt;&#xA;" OwnerUserId="3539" LastActivityDate="2015-12-23T00:20:12.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3655" PostTypeId="2" ParentId="3451" CreationDate="2015-12-23T00:43:30.433" Score="4" Body="&lt;p&gt;GNOME Tweak tool is designed for &lt;a href=&quot;https://www.gnome.org/&quot; rel=&quot;nofollow&quot;&gt;GNOME&lt;/a&gt;, a &lt;a href=&quot;https://en.wikipedia.org/wiki/Desktop_environment&quot; rel=&quot;nofollow&quot;&gt;desktop environment&lt;/a&gt; that is not shipped with elementary OS. While elementary OS does use some of the same components and thus settings as GNOME, not everything is similar or compatible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing GNOME Tweak Tool pulls in a couple of dependencies from GNOME: &lt;code&gt;gir1.2-gnomedesktop-3.0&lt;/code&gt; and &lt;code&gt;gnome-shell-common&lt;/code&gt;. These are pretty small packages and shouldn't have any noticeable effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Several settings will have no effect since they are meant for GNOME components. The following settings and some others will have no effect:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Icons on Desktop&lt;/li&gt;&#xA;&lt;li&gt;Lock Screen background&lt;/li&gt;&#xA;&lt;li&gt;Any of the &quot;Top Bar&quot; category settings&lt;/li&gt;&#xA;&lt;li&gt;Workspaces&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Some of the settings in GNOME Tweak tool are already exposed in the System Settings app that comes with elementary OS, such as several accessibility settings, advanced keyboard options, startup apps settings and more.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR It's technically partially usable, but keep in mind that it isn't made for elementary OS. Some stuff doesn't work correctly and some stuff doesn't work at all &lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2015-12-23T02:54:36.603" LastActivityDate="2015-12-23T02:54:36.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3656" PostTypeId="2" ParentId="3651" CreationDate="2015-12-23T00:49:07.597" Score="3" Body="&lt;p&gt;You can install the elementary OS on a separate partition or over free space on the hard drive. You will only need an external storage device to &lt;strong&gt;install&lt;/strong&gt; the OS.&lt;/p&gt;&#xA;" OwnerUserId="3540" LastEditorUserId="3757" LastEditDate="2016-04-15T02:12:20.110" LastActivityDate="2016-04-15T02:12:20.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3657" PostTypeId="1" CreationDate="2015-12-23T02:02:48.667" Score="0" ViewCount="327" Body="&lt;p&gt;What will happen if I use unity tweak tool in elementary OS? Does it break my system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Please explain in detail.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2017-06-21T10:29:59.050" Title="What are the consequences of using unity tweak tools on elementary" Tags="|release-freya|tweak-tool|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3658" PostTypeId="1" CreationDate="2015-12-23T08:12:35.277" Score="6" ViewCount="562" Body="&lt;p&gt;There was a &lt;a href=&quot;https://blog.algolia.com/when-solid-state-drives-are-not-that-solid/&quot; rel=&quot;noreferrer&quot;&gt;kernel bug that made TRIM lose random data&lt;/a&gt;. Samsung submitted a patch to the kernel. Is it applied in elementary OS? Or only new kernel versions? Do I need to update?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I find out whether TRIM is used on my system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is my 8-serie SSD just blacklisted for TRIM-operations, or does everything work as it's supposed to?&lt;/p&gt;&#xA;" OwnerUserId="3522" LastEditorUserId="190" LastEditDate="2015-12-25T09:38:30.447" LastActivityDate="2016-02-25T20:26:13.940" Title="Does elementary OS have TRIM enabled? Is my Samsung 8-serie SSD safe?" Tags="|updates|kernel|ssd|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3659" PostTypeId="2" ParentId="2707" CreationDate="2015-12-23T10:51:26.187" Score="2" Body="&lt;p&gt;Depending on your theme (mine was Pacifica), it was missing the actions icons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve the errors (see first post above) you need to copy the missing icons from the Humanity icontheme:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example in terminal (create directory, copy files):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /usr/share/icons/Pacifica/16x16/actions&#xA;&#xA;sudo cp -rp /usr/share/icons/Humanity/actions/16/* ../../../Pacifica/16x16/actions&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just in case, copy all possible sizes based on the target icontheme.&#xA;After that, just start software center via &quot;Applications &gt; System Tools&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works fine.&lt;/p&gt;&#xA;" OwnerUserId="3542" LastActivityDate="2015-12-23T10:51:26.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3660" PostTypeId="2" ParentId="3643" CreationDate="2015-12-23T13:47:13.267" Score="0" Body="&lt;p&gt;I recommend you the Arc theme: &lt;a href=&quot;https://github.com/horst3180/Arc-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/horst3180/Arc-theme&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Arc theme for Firefox: &lt;a href=&quot;https://github.com/horst3180/arc-firefox-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/horst3180/arc-firefox-theme&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QJx95.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QJx95.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HQa4n.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HQa4n.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/k5P4l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k5P4l.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2015-12-23T13:47:13.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3661" PostTypeId="1" CreationDate="2015-12-23T14:07:54.893" Score="0" ViewCount="1427" Body="&lt;p&gt;As you can see in the picture below, only the H264 codec video shows up its thumbnail, not the HEVC or VP9 (mkv).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I see their thumbnails?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vas33.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vas33.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2015-12-25T13:35:09.090" LastActivityDate="2015-12-29T14:05:11.697" Title="How can I see the thumbnails of HEVC and mkv with VP9 encode videos?" Tags="|pantheon-files|codec|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3662" PostTypeId="2" ParentId="3103" CreationDate="2015-12-23T16:27:10.847" Score="0" Body="&lt;p&gt;This should work with any app opened from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; scratch-text-editor &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After Scratch opens, type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ctrl + z&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will halt the process, but not close Scratch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will move Scratch's process to the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, finally type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;disown&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That's it.&lt;/p&gt;&#xA;" OwnerUserId="3545" LastActivityDate="2015-12-23T16:27:10.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3663" PostTypeId="1" CreationDate="2015-12-23T18:08:58.423" Score="2" ViewCount="329" Body="&lt;p&gt;I can't install flash. I used the script from the website but get the follwing error message. How do I do this?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Installing Flash for Midori&#xA;Press Enter to continue, or abort by pressing CTRL+C&#xA;--2015-12-23 11:56:04--  https://fpdownload.adobe.com/get/flashplayer/pdc/11.2.202.521/install_flash_player_11_linux.i386.tar.gz&#xA;Resolving fpdownload.adobe.com (fpdownload.adobe.com)... 172.233.140.76&#xA;Connecting to fpdownload.adobe.com (fpdownload.adobe.com)|172.233.140.76|:443... connected.&#xA;HTTP request sent, awaiting response... 404 Not Found&#xA;2015-12-23 11:56:04 ERROR 404: Not Found.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3546" LastEditorUserId="2708" LastEditDate="2015-12-24T14:36:23.913" LastActivityDate="2015-12-27T09:04:22.547" Title="Can't install flash" Tags="|software-installation|midori|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3664" PostTypeId="1" CreationDate="2015-12-23T18:41:30.690" Score="2" ViewCount="640" Body="&lt;p&gt;I have elementary Freya installed. It seems Bluetooth is working. At least it's not hard- or software blocked and the lamp on my T420s is on as if Bluetooth was doing something. But when I try to find devices via blueman or the Bluetooth device manager in Freya it just searches and doesn't find anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some output from the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;joachim@Rumpelkiste:~$ uname -a&#xA;Linux Rumpelkiste 3.19.0-42-generic #48~14.04.1-Ubuntu SMP Fri Dec 18 10:24:49 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux&#xA;&#xA;joachim@Rumpelkiste:~$ lspci -nnk | grep -iA2 net&#xA;00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)&#xA;Subsystem: Lenovo Device [17aa:21ce]&#xA;Kernel driver in use: e1000e&#xA;03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 34)&#xA;Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1311]&#xA;Kernel driver in use: iwlwifi&#xA;&#xA;joachim@Rumpelkiste:~$ lsusb&#xA;Bus 004 Device 003: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse&#xA;Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 004: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera&#xA;Bus 003 Device 009: ID 0a5c:217f Broadcom Corp. BCM2045B (BDC-2.1)&#xA;Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&#xA;joachim@Rumpelkiste:~$ dmesg | grep -i bluetooth&#xA;[    1.855737] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;[   15.364268] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked&#xA;[   16.346134] Bluetooth: Core ver 2.20&#xA;[   16.346157] Bluetooth: HCI device and connection manager initialized&#xA;[   16.346162] Bluetooth: HCI socket layer initialized&#xA;[   16.346164] Bluetooth: L2CAP socket layer initialized&#xA;[   16.346170] Bluetooth: SCO socket layer initialized&#xA;[   19.165088] Bluetooth: RFCOMM TTY layer initialized&#xA;[   19.165095] Bluetooth: RFCOMM socket layer initialized&#xA;[   19.165100] Bluetooth: RFCOMM ver 1.11&#xA;[   19.200276] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   19.200279] Bluetooth: BNEP filters: protocol multicast&#xA;[   19.200282] Bluetooth: BNEP socket layer initialized&#xA;[  153.209785] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;[ 1348.740479] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;[ 1351.572954] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;[ 1354.200843] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;[ 1358.737264] usb 3-1.4: Product: Broadcom Bluetooth Device&#xA;&#xA;joachim@Rumpelkiste:~$ dmesg | grep -i firmware&#xA;[    0.141526] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored&#xA;[    0.153481] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge&#xA;[    8.666901] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3&#xA;[   16.071900] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm&#xA;&#xA;joachim@Rumpelkiste:~$ lsmod | grep bluetooth&#xA;bluetooth             491520  22 bnep,btusb,rfcomm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anything I'm missing?&lt;/p&gt;&#xA;" OwnerUserId="3547" LastEditorUserId="190" LastEditDate="2015-12-25T09:38:12.137" LastActivityDate="2017-12-26T07:48:53.493" Title="Bluetooth not detecting any devices on Thinkpad T420s" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3665" PostTypeId="2" ParentId="3663" CreationDate="2015-12-23T18:41:34.377" Score="2" Body="&lt;p&gt;I appears that Adobe have released a minor update that broke the link. The &lt;a href=&quot;http://howtoelementaryos.org/how-to-install-flash-for-midori-in-elementary-os&quot; rel=&quot;nofollow&quot;&gt;script on howtoelementaryos.org&lt;/a&gt; has been repaired, but it should be noted that it was written for Luna, and may not function correctly, if at all, on Freya distributions. You should also know that &lt;a href=&quot;http://howtoelementaryos.org&quot; rel=&quot;nofollow&quot;&gt;howtoelementaryos.org&lt;/a&gt; is not an official elementary OS site.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2015-12-23T18:41:34.377" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3666" PostTypeId="1" CreationDate="2015-12-23T18:42:47.113" Score="2" ViewCount="5644" Body="&lt;p&gt;I installed another distro to second drive, and later removed it. Now when I boot, I get grub prompt with 30 sec choosing time. It didn't happen with fresh elementary install, bootloader didn't even flash, it went straight to elementary. I want that back, how?&lt;/p&gt;&#xA;" OwnerUserId="3536" LastEditorUserId="2708" LastEditDate="2015-12-24T14:30:18.920" LastActivityDate="2015-12-24T14:30:18.920" Title="How to remove or hide the GRUB boot menu in elementary OS?" Tags="|grub|startup|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3668" PostTypeId="2" ParentId="1631" CreationDate="2015-12-24T04:16:25.263" Score="1" Body="&lt;p&gt;We are supposed not to recommend the intallation of third party ppas, however this makes the configuration of suspend/resume so much more easy (actually, just a tick in a box) that I thought it would be worthy to post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;a href=&quot;http://www.netext73.pl/p/netext73-poczatek.html&quot; rel=&quot;nofollow&quot;&gt;netext73&lt;/a&gt;, which is a software from a Romanian group who sells custom kernels for linux. You don't have to buy their kernels in order to use the fix for hibernation. In reality, you could as well uninstall it after the whole process and you would be fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For its installation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:netext/netext73&#xA;sudo apt-get update &#xA;sudo apt-get install netext73&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And launch netext73:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;netext73&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go through the first installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check Hibernate in the optimizer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/382e76/how_to_fix_cannot_wake_up_from_suspend_issue/&quot; rel=&quot;nofollow&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="132" LastActivityDate="2015-12-24T04:16:25.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3669" PostTypeId="1" AcceptedAnswerId="3674" CreationDate="2015-12-24T04:55:20.203" Score="2" ViewCount="573" Body="&lt;p&gt;I have tried to install &lt;strong&gt;Elementary OS Freya&lt;/strong&gt; using a USB drive on my &lt;strong&gt;MacBook Pro&lt;/strong&gt; (&lt;em&gt;Retina, 13-inch, Early 2015&lt;/em&gt;) but the laptop doesn't recognize the bootable USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many times I thought it could the the drive, so I use another ones, and re-made several times the image with no luck. Non the laptop or the &lt;strong&gt;Startup Disk&lt;/strong&gt; utility found the drive as bootable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today, I just tested the same USB Drive on another &lt;strong&gt;Early 2015&lt;/strong&gt; and on a &lt;strong&gt;Late 2013&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For my surprise, the USB drive is ok and is working &quot;fine&quot; on the Late 2013, but it didn't work on the another Early 2015.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;What's going on with those models?&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, as you may have noticed, I wrote &lt;em&gt;fine&lt;/em&gt; whiting quotes, this is because when I booted the OS the UI was completely broken (looking huge) so i couldn't even use the OS on the Late 2013.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the development team aware of this issues? &lt;/p&gt;&#xA;" OwnerUserId="3550" LastActivityDate="2015-12-24T18:00:40.127" Title="Can't install from USB on MacBook Pro (Retina, 13-inch, Early 2015)" Tags="|release-freya|usb-drive|macbook|macintosh|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3670" PostTypeId="2" ParentId="3666" CreationDate="2015-12-24T10:32:41.753" Score="0" Body="&lt;p&gt;If you are using any Ubuntu based distribution, then it should support PPAs. You could install &quot;grub-customiser&quot;. A Google search would help you out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other way round is modifying the configuration files. This is explained well on &lt;a href=&quot;https://askubuntu.com/questions/148095/how-do-i-set-the-grub-timeout-and-the-grub-default-boot-entry&quot;&gt;this page&lt;/a&gt;. I would not like to copy it as it is well written.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Grub-customiser would be easier to do the task.&lt;/p&gt;&#xA;" OwnerUserId="3427" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2015-12-24T10:32:41.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3671" PostTypeId="1" AcceptedAnswerId="3692" CreationDate="2015-12-24T14:16:44.050" Score="0" ViewCount="216" Body="&lt;p&gt;I am using Opera as my default browser in daily basis but I want to change the.. hmm.. header? The gray thing over the top, above the Opera logo. I want to make it like it is on Ubuntu and Windows. The same problem I have with Linux Mint too, and in the Opera's settings there's not an option to change that. Any ideas how to remove the the gray header above the Opera logo?&lt;/p&gt;&#xA;" OwnerUserId="3370" LastActivityDate="2016-01-25T13:54:15.750" Title="Elementary OS: Freya and Opera 34" Tags="|applications|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3672" PostTypeId="2" ParentId="3666" CreationDate="2015-12-24T14:20:52.513" Score="2" Body="&lt;p&gt;&lt;strong&gt;To not see the GRUB menu while booting:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; value  to &lt;code&gt;0&lt;/code&gt; which is 10 by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now &lt;code&gt;reboot&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If then you need to change to Recovery mode in some instance just press &lt;code&gt;ESC&lt;/code&gt; when elementary starts. Then the GRUB menu will appear giving you the change to select the recovery mode.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-24T14:20:52.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3673" PostTypeId="1" CreationDate="2015-12-24T15:25:58.643" Score="1" ViewCount="182" Body="&lt;p&gt;So tried to install elementary OS via a USB. I initially tried to install it alongside Ubuntu. This was all fine but then I received a &quot;fatal error&quot; concerning the grub. I couldn't click anything so I shut the laptop down and tried again, this time I just chose to wipe the hard drive and install elementary OS exclusively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This went fine and I wasn't presented with a grub error. The installation finished and my screen went blank. My cursor appeared and it started blinking at intervals. I couldn't do anything so I rebooted. Now all I get is the elementary OS splash screen and sometimes a copyright notice from a Peter Dalvin. I fear I may have wrecked my laptop, since I can't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop: Lenovo G50-45 8 gigs ram 900g hd. AMD Radeon A4 Graphics Quad core CPU&lt;/p&gt;&#xA;" OwnerUserId="3553" LastEditorUserId="2708" LastEditDate="2015-12-24T16:24:52.700" LastActivityDate="2015-12-24T16:24:52.700" Title="Can't get passed splash screen" Tags="|grub|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3674" PostTypeId="2" ParentId="3669" CreationDate="2015-12-24T18:00:40.127" Score="1" Body="&lt;p&gt;HiDPI displays (like the one in your retina Macbook) aren't yet supported by elementary OS. You won't have a good time trying to install on this hardware. As you've noticed, the installer especially doesn't really behave properly here.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-24T18:00:40.127" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3679" PostTypeId="1" AcceptedAnswerId="3685" CreationDate="2015-12-25T13:06:25.647" Score="3" ViewCount="4308" Body="&lt;p&gt;How can I adjust the display color on elementary OS? They only offer predefined profiles that I can set my monitor to, but I can't calibrate any of them. I already have gnome color manager and icc installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to adjust contrast, red, green, and blue levels, and etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I figured it out, use xgamma(obsolete see xrandr solution below) command. I didn't realize the magnitude of numbers represents color contrast as well as adjusting color hue.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="3561" LastEditDate="2015-12-30T15:19:03.377" LastActivityDate="2020-08-17T10:46:57.363" Title="How to adjust display colors in elementary OS" Tags="|display|gnome|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3681" PostTypeId="2" ParentId="3657" CreationDate="2015-12-25T18:44:16.163" Score="2" Body="&lt;p&gt;I can't tell you what will happen. Probably you will be able to install it but it won't change anything since elementary OS uses the Pantheon desktop and not Unity. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you want a similar app for elementary OS, there's one called &lt;a href=&quot;https://launchpad.net/elementary-tweaks&quot; rel=&quot;nofollow&quot;&gt;elementary tweaks&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install it you just need to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install elementary-tweaks  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Beware that you are adding a PPA, this PPA didn't cause me any problems but you never know, be careful when you add a new one.&#xA;Also, this project is not maintained right now so it may stop working on future releases of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2015-12-25T18:44:16.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3682" PostTypeId="1" CreationDate="2015-12-25T20:23:40.473" Score="0" ViewCount="106" Body="&lt;p&gt;I have a problem with the updater packages. When I try to upgrade, I get this message: &#xA;&quot;Ha ocurrido un problema imposible de corregir cuando se inicializaba la información de los paquetes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Por favor, informe de esto como un fallo en el paquete «update-manager» e incluya el siguiente mensaje de error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'E:Tipo «/precise/main/binary-i386/» desconocido en la línea 1 de lista de fuentes /etc/apt/sources.list, E:Tipo «sudo» desconocido en la línea 1 de lista de fuentes /etc/apt/sources.list.d/mono-xamarin.list'&#xA; How can I fixed that? Tnx!&lt;/p&gt;&#xA;" OwnerUserId="3563" LastEditorUserId="45" LastEditDate="2015-12-27T00:39:25.093" LastActivityDate="2016-03-26T02:38:18.147" Title="Problems with the Update manager" Tags="|updates|luna|software-sources|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3683" PostTypeId="2" ParentId="361" CreationDate="2015-12-25T21:11:40.317" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Disclaimer: Although this solves the issue for me, I do not fully understand its implications. Please use it at your own discretion.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In reference to Arvaind Asuri Balaji answer (who then referenced an article by Zaantarovo) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my newbie take on what the command does, piece by piece: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sudo = root command &lt;/li&gt;&#xA;&lt;li&gt;chmod = change mode &lt;/li&gt;&#xA;&lt;li&gt;-x makes it &lt;strong&gt;not&lt;/strong&gt; executable(?) (+x would make a file executable) &lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/NetworkManager/dispatcher.d/90captive_portal_test&lt;/code&gt; is the file that controls/dictates the odd window &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;so it shouldn't be anything &lt;em&gt;too&lt;/em&gt; bad&lt;br&gt;&#xA;and besides just the run the command again but replace &lt;code&gt;-x&lt;/code&gt; with &lt;code&gt;+x&lt;/code&gt; if things do mess up&lt;/p&gt;&#xA;" OwnerUserId="3539" LastEditorUserId="3539" LastEditDate="2015-12-25T21:21:47.707" LastActivityDate="2015-12-25T21:21:47.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3684" PostTypeId="1" CreationDate="2015-12-26T04:59:08.663" Score="3" ViewCount="375" Body="&lt;p&gt;Is there a way to detect whether the internal battery or the external battery is being used first? How do I force elementary OS to use external battery first? I don't want the internal battery to be depleted first since it is not swap-able.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem persists after you restart the computer. The OS no longer combines the battery life of both batteries, but rather looks at only the battery life of one of the batteries. Is there a way to fix this permanently so it shows the battery life of both batteries?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;TEMPORARY SOLUTION:&lt;/strong&gt; Actually, I just discovered that the external battery is being used first. It was a simple removal of external battery and checking what battery power is at and the putting in the external battery and check what battery power is at again. Then I deduced which battery elementary OS is using first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I originally thought the internal battery was being used first because the battery life was extremely low, around 2 hours when I normally should have around 8 hours. Then I discovered elementary OS was not recognizing my external battery. I fixed it by removing the external battery and re-inserting it while the computer is on. Then it recognized my external battery and the battery percentage and timer on the wing-panel now displays the correct combined percentage and time left of &lt;strong&gt;both&lt;/strong&gt; batteries. But you need to do this every time you turn on the computer, and I am wondering if there is a permanent solution.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="3561" LastEditDate="2015-12-27T23:59:06.077" LastActivityDate="2016-03-28T08:36:30.340" Title="How can I make the panel display a battery estimate for both batteries?" Tags="|wingpanel|hardware|battery|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3685" PostTypeId="2" ParentId="3679" CreationDate="2015-12-26T06:38:39.233" Score="2" Body="&lt;p&gt;You can modify gamma settings (colors and effectively contrast too) using &lt;code&gt;xrandr&lt;/code&gt; tool. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;First determine the output name of your monitor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ xrandr -q | grep connected&#xA;VGA1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 410mm x 230mm&#xA;VIRTUAL1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the above example I have a monitor connected and seen as output &lt;strong&gt;VGA1&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;xrandr&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From man page of &lt;code&gt;xrandr&lt;/code&gt; (See &lt;code&gt;man xrandr&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Xrandr is used to set the size, orientation and/or  reflection  of  the&#xA;         outputs for a screen. It can also set the screen size.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output [DISPLAY_NAME] --gamma [R_VALUE]:[G_VALUE]:[B_VALUE]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output VGA1 --gamma 1.28:1:1.28 # for purple&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the above example gamma values are in format &lt;code&gt;Red&lt;/code&gt;:&lt;code&gt;Green&lt;/code&gt;:&lt;code&gt;Blue&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;http://www.rapidtables.com/web/color/RGB_Color.htm&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; for corresponding numeric values for  RGB colors.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In RGB color table, see decimal code and  if you have 128 then use 1.28&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to revert then use: &lt;code&gt;1:1:1&lt;/code&gt; to restore the default state.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;: (tested on freya)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make changes permanent, add the script to start-up applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano  monitor_display.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following lines.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;sleep 50&#xA;xrandr --output VGA1 --gamma 1.28:1:1.28 #same command you used previously.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now Ctrl+X --&gt; Y--&gt; ENTER.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x monitor_display.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now to add to startup applications:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open system settings --&gt; applications --&gt; startup --&gt; click on &lt;strong&gt;+&lt;/strong&gt; and add the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/bin/bash monitor_display.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;: You will see custom command &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;~/.config/autostart&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-30T08:58:59.987" LastActivityDate="2015-12-30T08:58:59.987" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3687" PostTypeId="1" AcceptedAnswerId="3688" CreationDate="2015-12-26T08:28:39.300" Score="-1" ViewCount="374" Body="&lt;p&gt;I am using elementary OS freya &lt;em&gt;0.3.2&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a&#xA;No LSB modules are available.&#xA;Distributor ID: elementary OS&#xA;Description:    elementary OS Freya&#xA;Release:    0.3.2&#xA;Codename:   freya&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have downloaded Opera &lt;code&gt;.deb&lt;/code&gt; from their official site. When I tried from software center:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/QkQ9u.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~/Downloads$ software-center opera-stable_34.0.2036.25_amd64.deb&#xA;&#xA;** (software-center:10987): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-C4cCKJjSeX: Connection refused&#xA;2015-12-26 13:40:04,684 - softwarecenter.ui.gtk3.app - INFO - setting up proxy 'None'&#xA;2015-12-26 13:40:05,054 - softwarecenter.backend.reviews - WARNING - Could not get usefulness from server, no username in config file&#xA;2015-12-26 13:40:05,056 - softwarecenter.plugin - INFO - activating plugin '&amp;lt;module 'webapps_activation' from '/usr/share/software-center/softwarecenter/plugins/webapps_activation.pyc'&amp;gt;'&#xA;2015-12-26 13:40:05,109 - softwarecenter.db.pkginfo_impl.aptcache - INFO - aptcache.open()&#xA;2015-12-26 13:40:05,595 - softwarecenter.backend.reviews - WARNING - error creating bsddb: '(22, 'Invalid argument -- BDB0054 illegal flag combination specified to DB_ENV-&amp;gt;open')' (corrupted?)&#xA;2015-12-26 13:40:05,595 - softwarecenter.backend.reviews - ERROR - trying to repair DB failed&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/share/software-center/softwarecenter/backend/reviews/__init__.py&quot;, line 358, in _save_review_stats_cache_blocking&#xA;self._dump_bsddbm_for_unity(outfile, outdir)&#xA;  File &quot;/usr/share/software-center/softwarecenter/backend/reviews/__init__.py&quot;, line 377, in _dump_bsddbm_for_unity&#xA;0600)&#xA;DBInvalidArgError: (22, 'Invalid argument -- BDB0054 illegal flag combination specified to DB_ENV-&amp;gt;open')&#xA;/usr/lib/python2.7/dist-packages/gi/overrides/GLib.py:535: Warning: Source ID 61 was not found when attempting to remove it&#xA; return super(MainContext, self).iteration(may_block)&#xA;2015-12-26 13:40:07,099 - softwarecenter.ui.gtk3.views.lobbyview - WARNING - skipping exhibit for: 'u'leadwerks\r\nleadwerks-indie'' not available&#xA;/usr/share/software-center/softwarecenter/ui/gtk3/views/appdetailsview.py:2030: Warning: Source ID 135 was not found when attempting to remove it&#xA;  Gtk.main_iteration()&#xA;2015-12-26 13:40:07,224 - softwarecenter.fixme - WARNING - logs to the root logger: '('/usr/lib/python2.7/dist-packages/dbus/connection.py', 589, 'call_async')'&#xA;2015-12-26 13:40:07,223 - dbus.connection - ERROR - Unable to set arguments ([None], [''], [''], [''], [''], ['']) according to signature None: &amp;lt;type 'exceptions.TypeError'&amp;gt;: Don't know which D-Bus type to use to encode type &quot;NoneType&quot;&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/python2.7/dist-packages/defer/__init__.py&quot;, line 489, in _inline_callbacks&#xA;result = gen.send(result)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/aptdaemon/client.py&quot;, line 1626, in _run_transaction_helper&#xA;timeout=_APTDAEMON_DBUS_TIMEOUT)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/dbus/proxies.py&quot;, line 137, in __call__&#xA;**keywords)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/dbus/connection.py&quot;, line 584, in call_async&#xA;    message.append(signature=signature, *args)&#xA;TypeError: Don't know which D-Bus type to use to encode type &quot;NoneType&quot;&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/python2.7/dist-packages/defer/__init__.py&quot;, line 489, in _inline_callbacks&#xA;  result = gen.send(result)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/aptdaemon/client.py&quot;, line 1626, in _run_transaction_helper&#xA;timeout=_APTDAEMON_DBUS_TIMEOUT)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/dbus/proxies.py&quot;, line 137, in __call__&#xA;**keywords)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/dbus/connection.py&quot;, line 584, in call_async&#xA;message.append(signature=signature, *args)&#xA;  TypeError: Don't know which D-Bus type to use to encode type &quot;NoneType&quot;&#xA;2015-12-26 13:40:07,225 - softwarecenter.db.pkginfo_impl.aptcache - ERROR - simulate failed&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/python2.7/dist-packages/aptdaemon/client.py&quot;, line 1591, in on_error&#xA;    error.raise_exception()&#xA;  File &quot;/usr/lib/python2.7/dist-packages/defer/__init__.py&quot;, line 489, in _inline_callbacks&#xA;  result = gen.send(result)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/aptdaemon/client.py&quot;, line 1626, in _run_transaction_helper&#xA;    timeout=_APTDAEMON_DBUS_TIMEOUT)&#xA; File &quot;/usr/lib/python2.7/dist-packages/dbus/proxies.py&quot;, line 137, in __call__&#xA;**keywords)&#xA; File &quot;/usr/lib/python2.7/dist-packages/dbus/connection.py&quot;, line 584, in call_async&#xA;   message.append(signature=signature, *args)&#xA; TypeError: Don't know which D-Bus type to use to encode type &quot;NoneType&quot;&#xA; 2015-12-26 13:40:07,341 - softwarecenter.backend.spawn_helper - WARNING - exit code 1 from helper for '['/usr/share/software-center/piston_generic_helper.py', '--datadir', '/usr/share/software-center/', 'SoftwareCenterRecommenderAPI', 'recommend_app', '{&quot;pkgname&quot;: null}']'&#xA;2015-12-26 13:40:07,341 - softwarecenter.backend.spawn_helper - WARNING - got error from helper: 'ERROR:__main__:urclient_apps&#xA;Traceback (most recent call last):&#xA; File &quot;/usr/share/software-center/piston_generic_helper.py&quot;, line 147, in &amp;lt;module&amp;gt;&#xA;  piston_reply = f(**kwargs)&#xA; File &quot;/usr/lib/python2.7/dist-packages/piston_mini_client/validators.py&quot;, line 41, in wrapper&#xA;   &quot;Argument '%s' must be a string&quot; % varname)&#xA; ValidationException: Argument 'pkgname' must be a string&#xA;&#xA;  2015-12-26 13:40:07,342 - softwarecenter.db.categories - WARNING - Error while accessing the recommender service: ERROR:__main__:urclient_apps&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/share/software-center/piston_generic_helper.py&quot;, line 147, in &amp;lt;module&amp;gt;&#xA;  piston_reply = f(**kwargs)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/piston_mini_client/validators.py&quot;, line 41, in wrapper&#xA;   &quot;Argument '%s' must be a string&quot; % varname)&#xA;ValidationException: Argument 'pkgname' must be a string&#xA;&#xA;2015-12-26 13:40:07,342 - softwarecenter.ui.gtk3.widgets.recommendations - WARNING - Error while accessing the recommender agent: ERROR:__main__:urclient_apps&#xA;Traceback (most recent call last):&#xA; File &quot;/usr/share/software-center/piston_generic_helper.py&quot;, line 147, in &amp;lt;module&amp;gt;&#xA; piston_reply = f(**kwargs)&#xA; File &quot;/usr/lib/python2.7/dist-packages/piston_mini_client/validators.py&quot;, line 41, in wrapper&#xA;  &quot;Argument '%s' must be a string&quot; % varname)&#xA;ValidationException: Argument 'pkgname' must be a string&#xA;&#xA;/usr/bin/software-center:184: Warning: Source ID 215 was not found when attempting to remove it&#xA; Gtk.main()&#xA;/usr/bin/software-center:184: Warning: Source ID 213 was not found when attempting to remove it&#xA;  Gtk.main()&#xA;/usr/lib/python2.7/dist-packages/gi/overrides/GLib.py:535: Warning: Source ID 20 was not found when attempting to remove it&#xA; return super(MainContext, self).iteration(may_block)&#xA;2015-12-26 13:40:12,125 - softwarecenter.db.utils - INFO - software-center-agent finished with status 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~/Downloads$ sudo dpkg -i opera-stable_34.0.2036.25_amd64.deb&#xA;[sudo] password for ravan: &#xA;Selecting previously unselected package opera-stable.&#xA;(Reading database ... 217479 files and directories currently installed.)&#xA;Preparing to unpack opera-stable_34.0.2036.25_amd64.deb ...&#xA;Unpacking opera-stable (34.0.2036.25) ...&#xA;dpkg-deb (subprocess): cannot copy archive member from 'opera-stable_34.0.2036.25_amd64.deb' to decompressor pipe: unexpected end of file or stream&#xA;dpkg-deb (subprocess): decompressing archive member: lzma error: unexpected end of input&#xA;dpkg-deb: error: subprocess &amp;lt;decompress&amp;gt; returned error exit status 2&#xA;dpkg: error processing archive opera-stable_34.0.2036.25_amd64.deb (--install):&#xA;cannot copy extracted data for './usr/lib/x86_64-linux-gnu/opera/opera.pak' to '/usr/lib/x86_64-linux-gnu/opera/opera.pak.dpkg-new': unexpected end of file or stream&#xA;Processing triggers for menu (2.1.46ubuntu1) ...&#xA;Errors were encountered while processing:&#xA;  opera-stable_34.0.2036.25_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-26T09:06:24.273" Title="Software Center can't install Opera, Internal error!" Tags="|software-installation|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3688" PostTypeId="2" ParentId="3687" CreationDate="2015-12-26T09:06:24.273" Score="0" Body="&lt;p&gt;It seems there is  a problem with the download and the file got corrupted. I have installed it manually using &lt;a href=&quot;https://help.ubuntu.com/community/OperaBrowser&quot; rel=&quot;nofollow&quot;&gt;Ubuntu documentation&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have manually added opera apt-repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository 'deb https://deb.opera.com/opera-stable/ stable non-free'&#xA;wget -qO- https://deb.opera.com/archive.key | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then installed opera,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install opera-stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-26T09:06:24.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3690" PostTypeId="2" ParentId="2318" CreationDate="2015-12-26T11:57:08.853" Score="1" Body="&lt;p&gt;I would go through &lt;a href=&quot;http://joost.fock.be/?p=5&quot; rel=&quot;nofollow&quot;&gt;these instructions&lt;/a&gt;, but skip the part about the dhcp server and giving the wireless interface and address.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I don't have a wired connection available for the moment I can't test if it is that simple to adapt to your needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disclaimer: I wrote the instructions. &lt;/p&gt;&#xA;" OwnerUserId="124" LastEditorUserId="124" LastEditDate="2015-12-26T12:06:30.590" LastActivityDate="2015-12-26T12:06:30.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3691" PostTypeId="2" ParentId="3658" CreationDate="2015-12-26T12:25:25.857" Score="2" Body="&lt;p&gt;from reading the messages on the kernel mailing list I understand that the data loss only is a problem when using the SSD in a raid0 or raid10 configuration.&#xA;They have fixed the bug in the kernel, but I can't seem to find in which version the fix was released.&lt;/p&gt;&#xA;" OwnerUserId="124" LastActivityDate="2015-12-26T12:25:25.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3692" PostTypeId="2" ParentId="3671" CreationDate="2015-12-26T13:43:22.960" Score="0" Body="&lt;p&gt;It is not possible to make opera as in Ubuntu. Because, no menu options available in elementary like &lt;code&gt;File  Edit    View    Bookmarks   Widgets Tools   Help&lt;/code&gt;. So the only way to access the menu options is via logo at present. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-26T13:43:22.960" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3695" PostTypeId="1" CreationDate="2015-12-26T14:46:32.130" Score="8" ViewCount="33189" Body="&lt;p&gt;How do I change the display resolution which has only one setting 640 x 480 to settings that will fit my laptop?&lt;/p&gt;&#xA;" OwnerUserId="3568" LastActivityDate="2020-10-18T20:03:31.140" Title="How to change display resolution" Tags="|display|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3696" PostTypeId="2" ParentId="3695" CreationDate="2015-12-26T15:03:54.703" Score="6" Body="&lt;p&gt;First run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mesa-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now logout/ login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to settings --&gt; Display &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have multiple displays and they are not mirrored, you can have different settings on each display. Select a display in the preview area.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select your desired resolution and rotation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &lt;code&gt;Apply&lt;/code&gt;. The new settings will be applied for 30 seconds before reverting back. That way, if you cannot see anything with the new settings, your old settings will be automatically restored. If you are happy with the new settings, click Keep This Configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/hvD6m.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Refer &lt;a href=&quot;https://help.ubuntu.com/stable/ubuntu-help/look-resolution.html&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt; for more info.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-26T16:38:20.190" LastActivityDate="2015-12-26T16:38:20.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3697" PostTypeId="1" CreationDate="2015-12-26T15:44:13.433" Score="2" ViewCount="233" Body="&lt;p&gt;How do I make a PGP key? The description says  &quot;Open Passwords and Encryption Keys&quot;.But I don't find it in elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please explain the procedure step by step.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am asking for GUI way, I know &lt;a href=&quot;https://askubuntu.com/a/77194/439451&quot;&gt;CLI method&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-26T16:19:02.053" LastActivityDate="2015-12-26T16:19:02.053" Title="How do I make a PGP key?" Tags="|openpgp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3698" PostTypeId="2" ParentId="3697" CreationDate="2015-12-26T15:55:46.910" Score="1" Body="&lt;p&gt;That GUI tool belong to seahorse (GNOME front end for GnuPG) package, so try installing it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install seahorse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2015-12-26T15:55:46.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3700" PostTypeId="1" CreationDate="2015-12-26T18:08:07.183" Score="1" ViewCount="1408" Body="&lt;p&gt;I use elementary OS Freya on a macbook pro 5,3. Can keyboard backlight be turned off after some time of inactivity ?&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2018-11-25T11:17:22.723" Title="Turn off keyboard backlight automatically" Tags="|keyboard|backlight|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3701" PostTypeId="2" ParentId="852" CreationDate="2015-12-26T18:40:13.917" Score="2" Body="&lt;p&gt;I have exactly the same laptop and I had the same problem.&#xA;Press &lt;kbd&gt;e&lt;/kbd&gt; on the selected option, after &lt;code&gt;quiet&lt;/code&gt; add &lt;code&gt;nomodeset&lt;/code&gt; and press &lt;kbd&gt;F10&lt;/kbd&gt; to save changes and boot.&#xA;Keep in mind that after installing Freya, the first time you boot, you 'll have the same problem. You need to install nvidia drivers (&lt;code&gt;Applications &amp;gt; Additional Drivers&lt;/code&gt;) and everything will work fine afterwards.&lt;/p&gt;&#xA;" OwnerUserId="596" LastEditorUserId="3757" LastEditDate="2016-04-18T03:07:04.870" LastActivityDate="2016-04-18T03:07:04.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3702" PostTypeId="1" CreationDate="2015-12-26T20:25:10.190" Score="4" ViewCount="578" Body="&lt;p&gt;Gala is using 9.5 GB of memory. This is after running for about 2 days. There is obviously some kind of memory leak. Is this known and is there any work being done on it?&lt;/p&gt;&#xA;" OwnerUserId="394" LastEditorUserId="394" LastEditDate="2018-11-29T17:30:14.183" LastActivityDate="2018-11-29T17:30:14.183" Title="Gala consuming a ton of memory with Nvidia Optimus" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="3703" PostTypeId="2" ParentId="3700" CreationDate="2015-12-26T20:42:53.727" Score="1" Body="&lt;p&gt;You could script something using &lt;code&gt;xprintidle&lt;/code&gt;. It will tell you how long it has been since some interaction has been done. Put it in a while loop with a &lt;code&gt;sleep&lt;/code&gt; command so it only checks every 5 seconds or so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set the backlight to 0 using this line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;0&quot; &amp;gt; /sys/class/leds/smc::kbd_backlight/brightness&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the script would look like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;while true&#xA;do&#xA;sleep 6&#xA;if [[ $((5 * 60 * 1000)) -lt $(xprintidle) ]]; then &#xA;echo &quot;0&quot; &amp;gt; /sys/class/leds/smc::kbd_backlight/brightness&#xA;fi&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;xprintidle returns the time in milliseconds so you need to do 5 minutes times 60 seconds times 1000 milliseconds. Change the 5 to something else if you want it to run after a different number of minutes. Run this script on startup and it will check every 6 seconds if it should turn off the backlight. It will use hardly any resources. Make sure to &lt;code&gt;chmod +x&lt;/code&gt; the script to make it executable.&lt;/p&gt;&#xA;" OwnerUserId="394" LastActivityDate="2015-12-26T20:42:53.727" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3705" PostTypeId="1" CreationDate="2015-12-26T20:59:44.310" Score="3" ViewCount="618" Body="&lt;p&gt;I can't bind Gtk.Popover() to button. &lt;/p&gt;&#xA;" OwnerUserId="2790" LastEditorUserId="45" LastEditDate="2015-12-27T00:17:49.893" LastActivityDate="2016-02-26T00:33:11.990" Title="How to use Gtk.Popover() in Vala?" Tags="|programming|gtk|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3707" PostTypeId="2" ParentId="3663" CreationDate="2015-12-27T00:32:52.700" Score="0" Body="&lt;p&gt;I modified the &lt;a href=&quot;http://howtoelementaryos.org/how-to-install-flash-for-midori-in-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;script on howtoelementaryos.org&lt;/a&gt; otherwise it would not work with Midori 0.5.11 on elementary OS Freya 0.3.2 (64-bit) :&lt;/p&gt;&#xA;&lt;p&gt;I inserted &lt;strong&gt;these two lines&lt;/strong&gt; at the very beginning of the script :&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo dpkg --add-architecture i386 &amp;amp;&amp;amp;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get update &amp;amp;&amp;amp;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;clear &amp;amp;&amp;amp;&lt;/p&gt;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&lt;p&gt;fi &amp;amp;&amp;amp;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I inserted &lt;strong&gt;this line&lt;/strong&gt; just before the last line of the script :&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get install nspluginwrapper &amp;amp;&amp;amp;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;nspluginwrapper -a -v -n -i&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I hope that my steps are correct and that my comment may help other users.&lt;/p&gt;&#xA;" OwnerUserId="695" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-27T09:04:22.547" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3708" PostTypeId="2" ParentId="3682" CreationDate="2015-12-27T00:38:41.897" Score="1" Body="&lt;p&gt;From the error message, I'm guessing that you are running Luna (elementary OS 0.2). Please be aware that elementary no longer provides updates to Luna. You really should download and install &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow&quot;&gt;the latest version of elementary OS&lt;/a&gt; (0.3.2, called Freya) to continue receiving updates from elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This looks like a problem with a 3rd party software source called &quot;mono-xamarin&quot;. My guess is that this a repository provided by &lt;a href=&quot;https://xamarin.com/&quot; rel=&quot;nofollow&quot;&gt;Xamarin&lt;/a&gt; for &lt;a href=&quot;http://www.mono-project.com/&quot; rel=&quot;nofollow&quot;&gt;Mono&lt;/a&gt;. It's possible that they may have discontinued this repository since you're running an old release. You might want to contact them for support.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-27T00:38:41.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3710" PostTypeId="1" CreationDate="2015-12-27T05:07:10.190" Score="1" ViewCount="195" Body="&lt;p&gt;I am using elementary OS freya. How can I encrypt (or) keep password protection to individual files/folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following are my requirements and what I have tried so far: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;The solution should be in GUI&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have already tried &lt;code&gt;cryptkeeper&lt;/code&gt; with no success.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have tried &lt;code&gt;ecryptfs-utils&lt;/code&gt; from software center, but that is not GUI.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I am not asking to hide, so keeping a &lt;code&gt;.&lt;/code&gt; before file name &lt;em&gt;may&lt;/em&gt; not be the solution.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I don't want to use &lt;code&gt;chmod&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-29T10:30:23.887" Title="How to keep password protection to individual files/folders" Tags="|release-freya|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3711" PostTypeId="2" ParentId="2746" CreationDate="2015-12-27T05:24:57.213" Score="1" Body="&lt;p&gt;The Ubuntu version of driver has some problem with Wine, so I recommend you to install the driver from this page: &lt;a href=&quot;https://launchpad.net/%7Egraphics-drivers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;command:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo add-apt-repository -y ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update;sudo apt-get install nvidia-355&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;They don't recommend people to install the latest nvidia-358, they say that it is buggy.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-27T05:24:57.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3712" PostTypeId="1" AcceptedAnswerId="3714" CreationDate="2015-12-27T06:11:02.893" Score="10" ViewCount="5370" Body="&lt;p&gt;It can be done in Fedora with the Gnome 3 theme: &lt;a href=&quot;http://fedoramagazine.org/make-firefox-look-native-fedora/&quot; rel=&quot;noreferrer&quot;&gt;http://fedoramagazine.org/make-firefox-look-native-fedora/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should be like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3whBJ.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3whBJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NwFPV.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NwFPV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="2708" LastEditDate="2015-12-27T06:25:17.557" LastActivityDate="2019-01-21T09:11:44.703" Title="Is it possible to get rid of the title bar for Firefox?" Tags="|themes|firefox|user-interface|" AnswerCount="6" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3713" PostTypeId="2" ParentId="3712" CreationDate="2015-12-27T06:24:46.330" Score="2" Body="&lt;p&gt;The simple workaround would be use  addon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/hide-caption-titlebar-plus-sma/&quot; rel=&quot;nofollow&quot;&gt;Hide Caption Titlebar Plus&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-27T06:24:46.330" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3714" PostTypeId="2" ParentId="3712" CreationDate="2015-12-27T06:59:28.517" Score="6" Body="&lt;p&gt;In the article that you've linked, they recommend using the &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/htitle/&quot;&gt;HTitle&lt;/a&gt; add-on. Afterwards, you also need to add the &lt;a href=&quot;https://userstyles.org/styles/96733/headerbar-style-for-gnome-3-16&quot;&gt;headerbar userstyle&lt;/a&gt; and set &lt;code&gt;Hide titlebar: Always&lt;/code&gt; in HTitle's add-on preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are &lt;a href=&quot;https://github.com/chpii/Headerbar&quot;&gt;several other Firefox add-ons&lt;/a&gt; that attempt to make it appear more native, but there's only so much that can be done. Firefox just isn't a native Gtk+ app. Your mileage may vary.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2015-12-27T06:59:28.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3718" PostTypeId="1" AcceptedAnswerId="3766" CreationDate="2015-12-27T12:54:41.200" Score="2" ViewCount="986" Body="&lt;p&gt;I am rather new to linux. Does elementary OS provide support for touchscreens and (wacom) digitizers? I am using a thinkpad tablet 10 and am working a lot with the pen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help,&#xA;Scarabaea&lt;/p&gt;&#xA;" OwnerUserId="3580" LastEditorUserId="45" LastEditDate="2015-12-30T22:58:03.543" LastActivityDate="2015-12-30T22:58:03.543" Title="Touchscreen/Digitizer support" Tags="|system|hardware|touchscreen|wacom|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3719" PostTypeId="1" AcceptedAnswerId="3720" CreationDate="2015-12-27T14:49:39.223" Score="1" ViewCount="312" Body="&lt;p&gt;For example:&lt;/p&gt;&#xA;&lt;h1&gt;DeaDBeeF music player&lt;/h1&gt;&#xA;&lt;p&gt;From this:&lt;a href=&quot;https://i.stack.imgur.com/aj5tU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aj5tU.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;To this:(edited by GIMP)&lt;a href=&quot;https://i.stack.imgur.com/vO9TY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vO9TY.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-27T21:29:38.447" Title="Is it possible to get rid of the title bar for not only Firefox but all applications?" Tags="|themes|user-interface|pantheon|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3720" PostTypeId="2" ParentId="3719" CreationDate="2015-12-27T15:25:51.897" Score="2" Body="&lt;p&gt;From answer in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3280/pixelsaver-alternative&quot;&gt;other post&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;No, its not possible for &lt;em&gt;all&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Window decorations are now drawn by the application itself. There no longer is a separate title bar.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-27T15:25:51.897" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3721" PostTypeId="1" CreationDate="2015-12-27T18:44:29.613" Score="9" ViewCount="9555" Body="&lt;p&gt;I am going to rebuild my box at work. I want to use elementary. I currently am using Ubuntu LTS and I know that it is a PITA to configure for that (need to use a different desktop). Is it possible to connect using RDP protocol (with remmina) to this desktop environment?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do NOT want to use VNC (or its ilk), basically because I don't like it, and I do not want to be running the service, and because I use RDP (or ssh) to connect to every other server that I need to get to for my job.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastEditorUserId="26" LastEditDate="2016-09-25T16:52:06.773" LastActivityDate="2016-09-25T16:52:36.200" Title="How to connect to elementary OS using rdp client (remmina)?" Tags="|gala|settings|rdp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3722" PostTypeId="2" ParentId="3705" CreationDate="2015-12-27T23:50:58.767" Score="3" Body="&lt;p&gt;You can associate the popover creation with a button event, like in the following example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var button = new Gtk.Button (); &#xA;var imag = new Gtk.Image.from_icon_name (&quot;help-info&quot;, Gtk.IconSize.MENU);&#xA;button.add (imag);&#xA;button.clicked.connect (() =&amp;gt; {&#xA;    var pop = new Gtk.Popover ();&#xA;    //set popover content&#xA;    pop.set_parent_pop (window);&#xA;    pop.move_to_widget (button);&#xA;    pop.show_all ();&#xA;    pop.present ();&#xA;    pop.run ();&#xA;    pop.destroy ();&#xA;});&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info about &lt;em&gt;Gtk.Popover&lt;/em&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://references.valadoc.org/#!api=gtk+-3.0/Gtk.Popover&quot; rel=&quot;nofollow&quot;&gt;Valadoc.org&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2015-12-28T00:01:01.130" LastActivityDate="2015-12-28T00:01:01.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3723" PostTypeId="1" CreationDate="2015-12-28T05:12:11.317" Score="2" ViewCount="138" Body="&lt;p&gt;I have attempted to install AMD drivers 2 different ways&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both options via software &amp;amp; updates&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each time on reboot I'm faced with the splash screen e logo hanging&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running latest freya&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hardware:&#xA;LG 34&quot; 34UM95-P @ 3440x1440 &amp;amp; AMD 290X 4GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any insight would be greatly appreciated&lt;/p&gt;&#xA;" OwnerUserId="3583" LastEditorUserId="3583" LastEditDate="2015-12-28T08:58:38.400" LastActivityDate="2016-06-25T12:04:01.597" Title="AMD R9 200X drivers" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3724" PostTypeId="1" CreationDate="2015-12-28T06:35:04.917" Score="6" ViewCount="776" Body="&lt;p&gt;Just noticed this today whilst trying to download Freya.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://sgp1.dl.elementary.io/download/QTT3MWI6NFUy3N==/elementaryos-0.3.2-stable-amd64.20151209.iso&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Note: I have changed the actual code)&lt;/p&gt;&#xA;" OwnerUserId="3584" LastEditorUserId="3757" LastEditDate="2016-05-06T14:10:23.013" LastActivityDate="2018-12-06T01:44:12.913" Title="Why does the elementary OS download URL seem to contain a unique tracking code?" Tags="|release-freya|elementary-website|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3726" PostTypeId="2" ParentId="3723" CreationDate="2015-12-28T08:18:09.603" Score="1" Body="&lt;p&gt;&lt;strong&gt;Installing via the command line&lt;/strong&gt;: From this &lt;a href=&quot;https://help.ubuntu.com/community/BinaryDriverHowto/AMD&quot; rel=&quot;nofollow&quot;&gt;documentation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Save a backup copy of xorg.conf in case this doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.BAK&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Remove/purge current fglrx and fglrx-amdcccle (If you have used a method outside of aptitude, apt, Software Center or Synaptic, follow the other party's instructions for removal). &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge fglrx*&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;fglrx-amdcccle is included when you install fglrx, so the following will suffice:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install fglrx&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To install the packages for hardware acceleration along with the driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install fglrx xvba-va-driver libva-glx1 libva-egl1 vainfo &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Generate a fresh xorg.conf BEFORE REBOOTING!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo amdconfig --initial&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3583" LastEditorUserId="2708" LastEditDate="2015-12-28T09:06:44.967" LastActivityDate="2015-12-28T09:06:44.967" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3727" PostTypeId="2" ParentId="3724" CreationDate="2015-12-28T11:07:56.180" Score="9" Body="&lt;p&gt;&lt;strong&gt;It's a time-code that stops hotlinking. It's not tracked, although your button click is.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi there! I built both the system to generate those links and manage the delivery network that delivers the downloads, so I'm quite qualified to answer this, although &lt;a href=&quot;https://elementaryos.stackexchange.com/users/2708/ravan&quot;&gt;Ravan&lt;/a&gt; has it mostly covered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary.io website is actually open-source in itself, and the code that generates (most) of this link can be seen in &lt;a href=&quot;https://github.com/elementary/website/blob/master/_backend/classify.current.php#L14&quot; rel=&quot;nofollow noreferrer&quot;&gt;/_backend/classify.current.php, Line 14&lt;/a&gt;. That line is this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$download_link = '//'.$region.'.dl.elementary.io/download/'.base64_encode(time()).'/';&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You see the bit about time in the variable? It's basically encoding the time, and the download server decodes it, and checks it's within the last few days. If not, it tells you to get a new link. This is to &lt;strong&gt;combat hotlinking&lt;/strong&gt; leeching bandwidth off of our servers, something several sites had been doing previously. This is why you get &lt;code&gt;405: Not Allowed&lt;/code&gt;, the link expired.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As for your visits and actions on the site, you should review the &lt;a href=&quot;https://elementary.io/privacy-policy&quot; rel=&quot;nofollow noreferrer&quot;&gt;Privacy Policy&lt;/a&gt;, and maybe &lt;a href=&quot;https://github.com/elementary/website/blob/master/_scripts/pages/download.js#L174&quot; rel=&quot;nofollow noreferrer&quot;&gt;/_scripts/pages/download.js, Line 174&lt;/a&gt; for what gets sent when you click download. To summarise, it's just the Architecture, Method, Region, and your previous OS (Windows, OS X, or Linux).&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2018-12-06T01:44:12.913" LastActivityDate="2018-12-06T01:44:12.913" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="3728" PostTypeId="2" ParentId="371" CreationDate="2015-12-28T11:49:27.257" Score="2" Body="&lt;p&gt;You can use &lt;code&gt;y-ppa manager&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/y-ppa-manager&#xA;sudo apt-get update&#xA;sudo apt-get install y-ppa-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is GUI tool to remove, purge etc. PPA. It is also used to remove duplicate PPAs and to import missing gpg keys etc.,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/uJZgO.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LKYg1.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-28T11:49:27.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3729" PostTypeId="2" ParentId="3615" CreationDate="2015-12-28T15:14:58.133" Score="10" Body="&lt;p&gt;Thanks to &lt;a href=&quot;https://askubuntu.com/users/260935/cl-netbox&quot;&gt;@cl-netbox&lt;/a&gt; for instructions/assistance.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You did not provide any details about the hardware (desktop PC or notebook), especially about the GPU.&#xA;But you mentioned in your comment below &lt;code&gt;xserver-xorg-video-nouveau&lt;/code&gt;, so I &lt;em&gt;assume&lt;/em&gt; you have a NVIDIA GPU. &#xA; I will give you a comprehensive answer which should address nearly every possibility to solve your problem.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;NVIDIA provides different versions of graphics drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current stable drivers are distributed through  the official repositories.&lt;br&gt;&#xA;The latest official drivers are distributed through the Proprietary GPU Drivers PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Generally you should use the drivers from the official repositories.&lt;br&gt;&#xA;When you have issues with these drivers, you can install the drivers from the GPU Drivers PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This often leads to properly working graphics, especially on very new NVIDIA GEFORCE adapters.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1&lt;/strong&gt; : Remove NVIDIA drivers you have installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt; : Identify the exact graphics adapter model&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -k | grep -EA2 'VGA|3D'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3&lt;/strong&gt;: (Re)install NVIDIA drivers to the system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For NVIDIA GEFORCE 400 - 700 I recommend to install NVIDIA drivers version 352.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install nvidia-352&#xA;sudo reboot  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For NVIDIA GEFORCE 800 - 900 I recommend to install NVIDIA drivers version 358.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install nvidia-358&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In case you experience a black screen, perform everything from a &lt;em&gt;virtual console.&lt;/em&gt;&lt;br&gt;&#xA;Highlight the elementary OS entry in the GRUB boot menu and press the &lt;kbd&gt;E&lt;/kbd&gt; key.&lt;br&gt;&#xA;Add &lt;code&gt;nouveau.modeset=0&lt;/code&gt; to the end of the linux line and then press &lt;kbd&gt;F10&lt;/kbd&gt; to boot.&lt;br&gt;&#xA;On the login screen press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt;   and enter user name and password.&lt;br&gt;&#xA;Now execute the commands ...&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-12-28T16:41:25.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3730" PostTypeId="1" CreationDate="2015-12-28T16:23:37.610" Score="1" ViewCount="229" Body="&lt;p&gt;Any audio played through Elementary is stuttering. It is universal, it stutters through Youtube, VLC etc and whether headphones are plugged in or not.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will stutter for about a second and then not stutter for a minute or so.  Sometimes the gap is longer, sometimes it is shorter.  This is the only distribution that I've experienced this with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lenovo G45-50 8Gigs RAM, 1THDD, Quad Core AMD A6 w/ Radeon R4 Graphics.  &lt;/p&gt;&#xA;" OwnerUserId="3588" LastActivityDate="2020-09-21T01:06:20.670" Title="Audio stuttering" Tags="|audio|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3731" PostTypeId="1" CreationDate="2015-12-28T17:04:55.820" Score="1" ViewCount="426" Body="&lt;p&gt;The highest resolution which can be chosen on YouTube for midori browser is 720p, is there any way to watch them in 1080p or higher resolution?&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2015-12-28T17:11:52.190" LastActivityDate="2015-12-29T14:39:00.633" Title="Is it possible to watch videos on YouTube in 1080p or higher resolution for midori browser?" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3734" PostTypeId="2" ParentId="1631" CreationDate="2015-12-28T20:42:12.697" Score="1" Body="&lt;p&gt;To fix the black screen on resume, just install the proprietary video driver and blacklist: nouveau (/etc/modprobe.d/blacklist.conf)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After doing this, resume should work properly.&lt;/p&gt;&#xA;" OwnerUserId="3591" LastActivityDate="2015-12-28T20:42:12.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3735" PostTypeId="2" ParentId="2836" CreationDate="2015-12-28T20:47:52.600" Score="1" Body="&lt;p&gt;I don't think this is a kernel issue because I tested several versions. I solved the suspend/resume issue by installing a proprietary video driver and blacklisting: nouveau&lt;/p&gt;&#xA;" OwnerUserId="3591" LastActivityDate="2015-12-28T20:47:52.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3739" PostTypeId="2" ParentId="880" CreationDate="2015-12-29T04:09:20.883" Score="0" Body="&lt;p&gt;The following commands do the job of using &lt;a href=&quot;https://github.com/Innenseide/lightsOn/blob/master/README&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;lightsOn&lt;/strong&gt;&lt;/a&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/scripts &amp;amp;&amp;amp; cd ~/scripts&#xA;wget https://raw.github.com/hotice/lightsOn/master/lightsOn.sh&#xA;chmod +x lightsOn.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By default, the script works with Firefox and Chromium, but you can also enable it for VLC or mplayer. To do this, open the &quot;&lt;code&gt;lightsOn.sh&lt;/code&gt;&quot; file and modify the &quot;&lt;code&gt;mplayer_detection&lt;/code&gt;&quot; and/or &quot;&lt;code&gt;vlc_detection&lt;/code&gt;&quot; from  &lt;code&gt;0&lt;/code&gt; to &lt;code&gt;1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To run the script: Open terminal and run-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/scripts/lightsOn.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To get the script to run each time your computer starts, you can add it to the startup applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reference &lt;a href=&quot;http://www.webupd8.org/2012/05/2-ways-to-temporarily-disable.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-29T04:09:20.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3741" PostTypeId="2" ParentId="3684" CreationDate="2015-12-29T06:36:55.890" Score="2" Body="&lt;p&gt;TEMPORARY SOLUTION: Actually, I just discovered that the external battery is being used first. It was a simple removal of external battery and checking what battery power is at and the putting in the external battery and check what battery power is at again. Then I deduced which battery elementary OS is using first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I originally thought the internal battery was being used first because the battery life was extremely low, around 2 hours when I normally should have around 8 hours. Then I discovered elementary OS was not recognizing my external battery. I fixed it by removing the external battery and re-inserting it while the computer is on. Then it recognized my external battery and the battery percentage and timer on the wing-panel now displays the correct combined percentage and time left of both batteries. But you need to do this every time you turn on the computer, and I am wondering if there is a permanent solution.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastActivityDate="2015-12-29T06:36:55.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3742" PostTypeId="1" CreationDate="2015-12-29T06:41:05.797" Score="1" ViewCount="1380" Body="&lt;p&gt;I deleted some pictures that I set as wallpaper but they're still showing up in my Desktop(Applications-&gt;System Setting-&gt;Desktop). I tried looking for them to see where they are stored. I have checked: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.cache/wallpapers &#xA;&#xA;usr/share/backgrounds &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And I also disabled hidden files as well and I couldn't find them. Anyone know where they are stored?&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="12361" LastEditDate="2017-11-21T23:51:54.727" LastActivityDate="2017-11-21T23:51:54.727" Title="Deleted wallpapers still showing up in &quot;Desktop&quot;" Tags="|desktop|wallpaper|app-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3743" PostTypeId="2" ParentId="3742" CreationDate="2015-12-29T06:51:49.377" Score="3" Body="&lt;p&gt;Actually, I found it. Elementary OS stores wallpaper cache for Applications-&gt;System Setting-&gt;Desktop in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.local/share/backgrounds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Really confusing to find especially after googling for solutions and finding multiple places where wallpapers can be stored.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="12361" LastEditDate="2017-11-17T14:46:32.583" LastActivityDate="2017-11-17T14:46:32.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3744" PostTypeId="1" AcceptedAnswerId="3745" CreationDate="2015-12-29T07:06:12.677" Score="0" ViewCount="68" Body="&lt;p&gt;I tried to use visudo to edit the sudoers setting, and I added a line for my account below the root, here is how I do it&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;username   ALL=(ALL) NOPASSWD:/usr/bin/apt-get update,/usr/bin/apt-get dist-upgrade,/usr/bin/apt-get autoclean&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;But it just doesn't work!&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2015-12-29T07:12:54.727" Title="My sudoers setting is not working" Tags="|security|sudo|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3745" PostTypeId="2" ParentId="3744" CreationDate="2015-12-29T07:12:54.727" Score="1" Body="&lt;p&gt;I found that I have to put this line &lt;strong&gt;at the end&lt;/strong&gt;.....&#xA;I haven't had this problem when I was using openSUSE..&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2015-12-29T07:12:54.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3746" PostTypeId="2" ParentId="3710" CreationDate="2015-12-29T10:28:36.463" Score="1" Body="&lt;p&gt;For individual files, I usually just compress files as &lt;code&gt;.zip&lt;/code&gt;, then enter a password to protect it. When you try to open the compressed file, it asks you for the password.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="2708" LastEditDate="2015-12-29T10:30:23.887" LastActivityDate="2015-12-29T10:30:23.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3747" PostTypeId="2" ParentId="880" CreationDate="2015-12-29T13:20:51.333" Score="0" Body="&lt;p&gt;The best way I found it for every Linux system is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open VLC&lt;/li&gt;&#xA;&lt;li&gt;Play and pause any video you have&lt;/li&gt;&#xA;&lt;li&gt;Reduce to icon&lt;/li&gt;&#xA;&lt;li&gt;Then you can view every streaming video without start the screensaver&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This is the best way and more simple instead use some useless scripts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This feature need to come with browsers and not with additional scripts/apps.&lt;/p&gt;&#xA;" OwnerUserId="3589" LastActivityDate="2015-12-29T13:20:51.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3748" PostTypeId="2" ParentId="3661" CreationDate="2015-12-29T14:05:11.697" Score="1" Body="&lt;p&gt;&lt;em&gt;This may not be exact solution but a temporary work-around&lt;/em&gt;. Working for &lt;code&gt;vp9&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to have preview/thumbnails, use &lt;code&gt;nautilus&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nautilus &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Recommended reading: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/356/is-nautilus-really-not-recommended&quot;&gt;Is Nautilus really “not-recommended”?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;totem&lt;/code&gt; and &lt;code&gt;ffmpegthumbnailer&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install totem ffmpegthumbnailer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the task is to keep only &lt;code&gt;totem.thumbnailer&lt;/code&gt; in &lt;code&gt;/usr/share/thumbnailers/&lt;/code&gt;. For this, open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Click on File system --&gt; usr --&gt; share --&gt; thumbnailers --&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here keep ONLY &lt;code&gt;totem.thumbnailer&lt;/code&gt;, CUT remaining two and place in home folder (your choice).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Close files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now clear cache:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.thumbnails&#xA;mkdir ~/.thumbnails&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now launch &lt;code&gt;nautilus&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-12-29T14:05:11.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3750" PostTypeId="2" ParentId="3731" CreationDate="2015-12-29T14:39:00.633" Score="1" Body="&lt;p&gt;I think the problem come here: &lt;a href=&quot;https://www.youtube.com/html5&quot; rel=&quot;nofollow&quot;&gt;https://www.youtube.com/html5&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Midori is light but with less features then the services example youtube can't use extra feature (1080p videos example).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I choose (&lt;em&gt;I'm sad about it because I like midori browser&lt;/em&gt;) Chrome for leave this problems back to me :)&lt;/p&gt;&#xA;" OwnerUserId="3589" LastActivityDate="2015-12-29T14:39:00.633" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3753" PostTypeId="2" ParentId="3721" CreationDate="2015-12-29T15:44:12.007" Score="3" Body="&lt;p&gt;You can connect to a Linux machine using a RDP client if you install the &lt;code&gt;xrdp&lt;/code&gt; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, what the &lt;code&gt;xrdp&lt;/code&gt; really do is to translate the RDP to a VNC server, installed via package dependency. So if you don't want a VNC service running in your machine, is better to connect using SSH.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Besides that, there's a issue with the &lt;code&gt;xrdp&lt;/code&gt; and &quot;complex&quot; desktop environments, like Gnome-shell. I don't know yet if it works fine with Gala (elementary's DE), but I'll test and edit this answer (I got curious about that).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use SSH to connect, install the OpenSSH server:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install openssh-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT: Yup. No Gala via RDP. Just check it.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="26" LastEditDate="2016-09-25T16:52:36.200" LastActivityDate="2016-09-25T16:52:36.200" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3754" PostTypeId="1" CreationDate="2015-12-29T16:09:02.443" Score="5" ViewCount="391" Body="&lt;p&gt;How to find what codec was used in a video (Audio/Video) and extra information like in &lt;code&gt;nautilus&lt;/code&gt;. The below screenshot is from nautilus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2G24M.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any &lt;em&gt;GUI&lt;/em&gt; way to find codec information, without shifting from file manager?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to get the details in &lt;code&gt;pantheon-files&lt;/code&gt; ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already tried &lt;code&gt;mediainfo-gui&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-01T12:26:08.193" Title="How to find out what codec is used in a video" Tags="|release-freya|sound|codec|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3755" PostTypeId="2" ParentId="698" CreationDate="2015-12-29T18:04:06.630" Score="2" Body="&lt;p&gt;When you select the language you need to change the system language, then enable administrator privileges and choice your language. Logout and see the time is in your language :)&lt;/p&gt;&#xA;" OwnerUserId="3589" LastActivityDate="2015-12-29T18:04:06.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3758" PostTypeId="1" CreationDate="2015-12-30T08:05:47.673" Score="1" ViewCount="46" Body="&lt;p&gt;&lt;a href=&quot;https://youtu.be/uxr5K9nrCCU&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/uxr5K9nrCCU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes I need to download some images, it is more convient for me by dragging the images to pantheon-files, but the animation is too slow.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2015-12-30T08:25:50.907" LastActivityDate="2015-12-30T08:25:50.907" Title="It is too laggy for dragging pictures from web browser to pantheon-files" Tags="|pantheon-files|plank|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3759" PostTypeId="2" ParentId="512" CreationDate="2015-12-30T12:11:43.683" Score="3" Body="&lt;p&gt;To replace file manager in freya:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install other file manager, for example &lt;code&gt;nautilus&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nautilus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To distinguish between Pantheon-files  and nautilus, and to show nautilus in applications launcher:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/applications/nautilus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In [desktop entry]:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;Name&lt;/code&gt; and &lt;code&gt;OnlyShowIn&lt;/code&gt; entries to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Name=Nautilus Files&#xA;&#xA;OnlyShowIn=GNOME;Unity;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can easily modify file manager from GUI:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System settings --&gt; applications --&gt; default --&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/0PM08.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To identify the current file manager:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-mime query default inode/directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See &lt;code&gt;man xdg-mime&lt;/code&gt; for more info.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To set nautilus as default file manager:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-mime default nautilus.desktop inode/directory application/x-gnome-saved-search.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1206/remove-icons-from-desktop/1209#1209&quot;&gt;Nemo&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2015-12-30T12:11:43.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3760" PostTypeId="1" CreationDate="2015-12-30T13:03:58.367" Score="1" ViewCount="151" Body="&lt;p&gt;I just restarted my Elementary OS and it is stuck at splash screen with a text &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Waiting for network configuration...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2460" LastEditorUserId="2708" LastEditDate="2015-12-30T13:42:12.007" LastActivityDate="2015-12-30T13:57:42.840" Title="Stuck at splash with &quot;Waiting for network configuration&quot;" Tags="|boot|networking|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3761" PostTypeId="1" CreationDate="2015-12-30T13:14:20.233" Score="1" ViewCount="77" Body="&lt;p&gt;I have problem with a installation elementary OS. When I choose a installation of the main first I see a message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ACPI PPC Probe failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after this I see that &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oT9Cn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oT9Cn.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried nomodeset. How  can I install elementary OS? The same  problem I have with linux mint.&lt;/p&gt;&#xA;" OwnerUserId="3609" LastEditorUserId="2708" LastEditDate="2015-12-30T13:19:45.420" LastActivityDate="2015-12-30T13:19:45.420" Title="Problem with installation" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3762" PostTypeId="1" CreationDate="2015-12-30T13:34:06.433" Score="1" ViewCount="3304" Body="&lt;p&gt;My laptop is thinkpad T450s and there is very bad screen tearing when I move windows around or when I watch videos. My CPU is &lt;code&gt;Intel HD 5500&lt;/code&gt; with integrated graphics(core i5).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked around but I only found a solution for Ubuntu. I found same &lt;a href=&quot;https://askubuntu.com/questions/667090/screen-tearing-intel-graphics-5500&quot;&gt;question&lt;/a&gt; and this is the &lt;a href=&quot;https://askubuntu.com/questions/667466/screen-tearing-in-ubuntu-with-nvidia-intel-graphics/668590#668590&quot;&gt;answer&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure if that can be used for elementary OS. &#xA;It didn't fix anything. Is there a solution for screen tearing on elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried this &lt;a href=&quot;https://www.youtube.com/watch?v=IBtpXh728HU&quot; rel=&quot;nofollow noreferrer&quot;&gt;video&lt;/a&gt; and it didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; It does work, you just need to restart, which I forgot to do. See solution below.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2020-12-30T18:57:48.660" Title="Screen tearing Intel HD 5500" Tags="|graphic-drivers|display|intel|graphics|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3763" PostTypeId="1" CreationDate="2015-12-30T13:51:10.423" Score="4" ViewCount="97" Body="&lt;p&gt;The old version of tumbler is way too old, the version is so old that it doesn't support the hevc or vp9 videos to generate thumbnails, I have successfully installed the newer version of tumbler(0.1.31), tumbler-common(0.1.31) and gstreamer1.0(1.4.3), how do I make pantheon-files works with it?&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2015-12-30T14:02:43.810" LastActivityDate="2016-02-26T16:50:47.907" Title="How do I make pantheon-files works with newer version of tumbler?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3765" PostTypeId="2" ParentId="3762" CreationDate="2015-12-30T14:40:47.020" Score="1" Body="&lt;p&gt;It turns out I just had to restart the computer for it to take effect(of course!).&#xA;Type the following into the terminal to get rid of screen tearing for intel CPU/integrated graphics. In this case I tested it for intel HD graphics 5500 on my Lenovo Thinkpad T450s.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /etc/X11/xorg.conf.d/&#xA;echo -e 'Section &quot;Device&quot; \n Identifier &quot;Intel Graphics&quot; \n Driver &quot;Intel&quot; \n Option &quot;TearFree&quot; &quot;true&quot; \nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The file &quot;/etc/X11/xorg.conf.d/20-intel.conf&quot; should contain:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;Identifier  &quot;Intel Graphics&quot;&#xA;Driver      &quot;Intel&quot;&#xA;Option      &quot;TearFree&quot;    &quot;true&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="3561" LastEditDate="2015-12-31T21:30:42.157" LastActivityDate="2015-12-31T21:30:42.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3766" PostTypeId="2" ParentId="3718" CreationDate="2015-12-30T15:23:21.287" Score="0" Body="&lt;p&gt;Elementary OS does support wacom tablets. There is even a hardware icon in &quot;System Settings&quot; under &quot;Hardware&quot; that says &quot;Wacom Tablet&quot;. I don't use a wacom tablet, but it is still there so I imagine it must support wacom tablet, otherwise there is no reason the &quot;Wacom Tablet&quot; icon should be there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The real problem that can occur is what happens when you plug in your wacom tablet. If there is one, you can come back and troubleshoot and post the problem then.&lt;/p&gt;&#xA;" OwnerUserId="3561" LastActivityDate="2015-12-30T15:23:21.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3767" PostTypeId="1" AcceptedAnswerId="3769" CreationDate="2015-12-30T16:09:16.340" Score="2" ViewCount="13985" Body="&lt;p&gt;I tried to add my custom shortcuts for my installed apps.  But I can't found a right tutorial to do this operations. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone suggest me to create a desktop shortcut for my custom apps? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not find a solution for my question by reading the article. &lt;/p&gt;&#xA;" OwnerUserId="3146" LastEditorUserId="3146" LastEditDate="2016-01-01T08:56:10.673" LastActivityDate="2016-01-01T08:56:10.673" Title="How to add desktop shortcuts for installed applications - freya?" Tags="|release-freya|applications|desktop|" AnswerCount="2" CommentCount="9" ClosedDate="2015-12-31T13:59:03.350" ContentLicense="CC BY-SA 3.0" />
  <row Id="3768" PostTypeId="2" ParentId="3767" CreationDate="2015-12-30T17:06:55.937" Score="2" Body="&lt;p&gt;Create a &amp;quot;name.desktop&amp;quot; file in &amp;quot;/usr/share/applications/&amp;quot;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;[Desktop Entry]&lt;/p&gt;&#xA;&lt;p&gt;Name= (the name)&lt;/p&gt;&#xA;&lt;p&gt;GenericName= (the name)&lt;/p&gt;&#xA;&lt;p&gt;Exec= (the command)&lt;/p&gt;&#xA;&lt;p&gt;Icon= (the icon path)&lt;/p&gt;&#xA;&lt;p&gt;Terminal=false&lt;/p&gt;&#xA;&lt;p&gt;Type=Application&lt;/p&gt;&#xA;&lt;p&gt;StartupNotify=true&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="703" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2015-12-30T17:06:55.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3769" PostTypeId="2" ParentId="3767" CreationDate="2015-12-30T17:11:46.560" Score="3" Body="&lt;p&gt;By default, the desktop in elementary freya is disabled. You need to enable it first. After enabling the desktop, open the file browser and navigate to:&#xA;   /usr/share/applications/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find list of installed applications there. Select the applications you want, &lt;strong&gt;copy&lt;/strong&gt; it and paste it in the desktop.&lt;/p&gt;&#xA;" OwnerUserId="218" LastActivityDate="2015-12-30T17:11:46.560" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3771" PostTypeId="1" AcceptedAnswerId="3777" CreationDate="2015-12-31T02:45:36.497" Score="1" ViewCount="317" Body="&lt;p&gt;I am using elementary OS freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to get right click menu when the folder is in column view and folder is fully populated and takes all the space. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got right click menu for list view by clicking on header. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't find any way for &lt;code&gt;View as column&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Edit&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to get rightclick menu from keyboard key, but not from mouse.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-01T09:30:21.573" LastActivityDate="2016-03-28T16:33:50.363" Title="How to get right click menu when folder in column view" Tags="|release-freya|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3772" PostTypeId="1" AcceptedAnswerId="3775" CreationDate="2015-12-31T04:54:03.053" Score="1" ViewCount="110" Body="&lt;p&gt;I am using Acer ICONIA TAB W500P and my problem is that I can drag the top panel by touching and dragging it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I used my fingers to drag it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lUIiO.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lUIiO.gif&quot; alt=&quot;dragging the top panel with my fingers (not mouse)&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't move it with my mouse and I can't reset it unless if I run &lt;code&gt;pkill wingpanel&lt;/code&gt; in the terminal. It annoys me every time I accidentally drag it and I need to reset it again with the command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="3483" LastEditorUserId="2708" LastEditDate="2015-12-31T06:31:51.980" LastActivityDate="2015-12-31T07:32:57.250" Title="Can drag top panel in a touch screen device" Tags="|release-freya|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3774" PostTypeId="1" AcceptedAnswerId="3782" CreationDate="2015-12-31T06:41:56.393" Score="6" ViewCount="602" Body="&lt;p&gt;I am using elementary OS Freya. I was unable to install Skype. I've formatted my laptop and installed Freya (twice), same thing. Can't install Skype, same error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;luffy@luffy-Satellite-C850-B797:~$ sudo apt-get install skype&#xA;[sudo] password for luffy: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; skype : Depends: skype-bin but it is not installable&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update, Additional requested outputs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://pastebin.ubuntu.com/14311073/plain/&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;grep -r &quot;^deb&quot; /etc/apt/sources.list*&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://pastebin.ubuntu.com/14306992/plain/&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;echo q | aptitude -s install skype&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://pastebin.ubuntu.com/14312254/plain/&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;apt-get -s -o Debug::pkgProblemResolver=yes install skype-bin&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://pastebin.ubuntu.com/14312376/plain/&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;apt-cache policy xdg-user-dirs xdg-user-dirs-gtk xdg-user-dirs:i386 xdg-user-dirs-gtk:i386&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3617" LastEditorUserId="1239" LastEditDate="2016-01-01T11:40:47.830" LastActivityDate="2016-01-01T11:40:47.830" Title="Skype - can't install it on Freya" Tags="|software-installation|skype|dependencies|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="3775" PostTypeId="2" ParentId="3772" CreationDate="2015-12-31T07:32:57.250" Score="1" Body="&lt;p&gt;This is a known bug, which will be fixed in the next release of elementary OS: &lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1432512&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/wingpanel/+bug/1432512&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2015-12-31T07:32:57.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3776" PostTypeId="2" ParentId="3648" CreationDate="2015-12-31T07:35:09.920" Score="4" Body="&lt;p&gt;To install any language follow the steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open software &amp;amp; updates --&gt; updates tab --&gt; Enable &lt;em&gt;trusty-security&lt;/em&gt; and &lt;em&gt;trusty-updates&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xWxjc.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now Go to system settings --&gt; Language &amp;amp; Region --&gt; Unlock --&gt; Hit &lt;strong&gt;&lt;code&gt;+&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select required language and double click. It will complete installation.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;If installation successful, go to step 6.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If step 1 fails, go to &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;step-2 : GUI (recommended)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;step-3 :  CLI &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;step-4: GUI &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;step-5: Manual (Not recommended)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt;: ( &lt;em&gt;GUI way&lt;/em&gt; tested, working)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;Language Support&lt;/code&gt; from Software Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;Language Support&lt;/code&gt; from application launcher. Click on &lt;kbd&gt;Install/ Remove languages&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/WhGjw.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check (select) the desired language(s) and click &lt;kbd&gt;Apply Changes&lt;/kbd&gt; to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/b9ta8.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If any package is failed to install or partially installed, close &lt;code&gt;language support&lt;/code&gt;. Now open &lt;code&gt;language support&lt;/code&gt; again and select the previous language again to install. It will complete installation of missing packages (It mean it will continue, where it has stopped). After successful installation, go to step 6.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3&lt;/strong&gt;: ( &lt;em&gt;CLI&lt;/em&gt; way,tested, working)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For any language we need to install four packages.  Open terminal and run the following command to install those four packages.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install language-pack-[cod] language-pack-gnome-[cod] language-pack-[cod]-base language-pack-gnome-[cod]-base&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where [cod] is language code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;, &lt;code&gt;fr&lt;/code&gt; for french, &lt;code&gt;es&lt;/code&gt; for Espanol, &lt;code&gt;en&lt;/code&gt; for English etc.,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Replace [cod] with corresponding language code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;: for &lt;code&gt;Espilon&lt;/code&gt; (Spanish) &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install language-pack-es language-pack-gnome-es language-pack-es-base language-pack-gnome-es-base&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also each application can have its language pack. To know the packages to be installed :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;check-language-support -l [cod]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ check-language-support -l fr&#xA;firefox-locale-fr gimp-help-fr hunspell-fr language-pack-fr language-pack-gnome-fr thunderbird-locale-fr wfrench&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;All in one command&lt;/strong&gt; to install all required packs for a particular lang. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install `check-language-support -l [code]`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install `check-language-support -l fr`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After successful installation go to step 6.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 4&lt;/strong&gt;:( &lt;em&gt;GUI&lt;/em&gt; way, working)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use any package manager either &lt;code&gt;Software Center&lt;/code&gt; or &lt;code&gt;Synaptic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use &lt;code&gt;synaptic&lt;/code&gt; first install from software center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Make sure your system is upto date&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to install four lang packages. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;language-pack-[cod]&#xA;language-pack-gnome-[cod]&#xA;language-pack-[cod]-base &#xA;language-pack-gnome-[cod]-base&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where [cod] is language code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;For example&lt;/em&gt;, &lt;code&gt;fr&lt;/code&gt; for french, &lt;code&gt;es&lt;/code&gt; for Espanol, &lt;code&gt;en&lt;/code&gt; for English etc.,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open software center --&gt; search for those packages and install.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open synaptic --&gt; click on search and search for those packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Replace [cod] with language code.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/bmyJR.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now select the package and right click--&gt; Mark for installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/CDGQo.png&quot; alt=&quot;Imgur&quot;&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will automatically install packages for other applications.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 5&lt;/strong&gt;: (not recommended) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can manually install required four lang packs like &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2903/can-not-install-japanese-language?rq=1&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 6&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you successfully installed desired language pack:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to System settings --&gt; language &amp;amp; region --&gt;&#xA; adjust &lt;em&gt;Region&lt;/em&gt; and &lt;em&gt;Format&lt;/em&gt; for desired language, and click on &lt;kbd&gt;set language&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/FdXWG.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: Steps 2 &amp;amp; 3 will surely work. If any lang pack is missing for a particular application, for example firefox, run &lt;code&gt;software updater&lt;/code&gt;, it will do the job.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2015-12-31T09:46:57.443" LastActivityDate="2015-12-31T09:46:57.443" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3777" PostTypeId="2" ParentId="3771" CreationDate="2015-12-31T10:11:07.173" Score="3" Body="&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1203926&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug&lt;/a&gt; in the file manager. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;strong&gt;&lt;em&gt;list view&lt;/em&gt;&lt;/strong&gt; you can click on the column header (the top bar, the one that says filename, size,...) to obtain the menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ltWqn.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ltWqn.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...but for the &lt;strong&gt;&lt;em&gt;column view&lt;/em&gt;&lt;/strong&gt; such a trick doesn't exist. &lt;/p&gt;&#xA;" OwnerUserId="124" LastEditorDisplayName="user170" LastEditDate="2016-03-28T16:33:50.363" LastActivityDate="2016-03-28T16:33:50.363" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3778" PostTypeId="2" ParentId="2993" CreationDate="2015-12-31T12:15:00.177" Score="1" Body="&lt;p&gt;I start with def of &lt;code&gt;autoremove&lt;/code&gt; from &lt;code&gt;man apt-get&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;autoremove &#xA;          is used to remove packages that were automatically&#xA;          installed to satisfy dependencies for other packages and are now&#xA;          no longer needed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It means the packages you have listed are dependencies and are installed to satisfy dependency of other package(s).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;The reason for these packages to be  listed&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might have removed the main package which causes the installation of these packages. Now they are removing because they are &lt;strong&gt;unused dependencies&lt;/strong&gt;  that remain on your system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to know which package causes the installation of these dependencies use &lt;code&gt;apt-cache rdepends&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;code&gt;man apt-cache&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rdepends shows a listing of each reverse dependency a package has.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;http://pastebin.ubuntu.com/14309731/&quot; rel=&quot;nofollow&quot;&gt;pastebin&lt;/a&gt; for packages in your question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is clear that you &lt;em&gt;might&lt;/em&gt;  have removed &lt;code&gt;nautilus&lt;/code&gt;. Also &lt;code&gt;brasero&lt;/code&gt; is not in default elementary installation. (see reverse depends for &lt;code&gt;brasero&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To verify all dependencies for &lt;code&gt;nautilus&lt;/code&gt; use &lt;code&gt;apt-cache depends nautilus&lt;/code&gt; and verify whether the packages that &lt;code&gt;autoremove&lt;/code&gt; removing are listed or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me when I run &lt;code&gt;autoremove&lt;/code&gt; after removing nautilus I got:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages will be REMOVED: &#xA;&#xA;adwaita-icon-theme apturl apturl-common brasero brasero-cdrkit&#xA;brasero-common dvd+rw-tools growisofs libbrasero-media3-1 libburn4 libisofs6&#xA;libjte1 session-migration ubuntu-mono&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2015-12-31T12:15:00.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3779" PostTypeId="1" AcceptedAnswerId="3792" CreationDate="2015-12-31T12:29:41.420" Score="6" ViewCount="2711" Body="&lt;p&gt;Note that this is not about installing elementary OS (I already have a functional system that I would like to keep).  I simply want to install Windows alongside it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is 64 bit, and UEFI (I think, but if someone knows how to check this that might be worthwhile).&lt;/p&gt;&#xA;" OwnerUserId="229" LastEditorUserId="34" LastEditDate="2016-01-04T21:57:02.660" LastActivityDate="2016-01-04T21:57:02.660" Title="How can I install Windows (10, probably) alongside my existing elementary OS?" Tags="|microsoft-windows|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3780" PostTypeId="1" AcceptedAnswerId="3781" CreationDate="2015-12-31T12:59:32.323" Score="5" ViewCount="12073" Body="&lt;p&gt;I am using freya. When I run sudo apt-get update I got the following errors&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-amd64/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;W: Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-i386/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/trusty/main/binary-i386/Packages  Hash Sum mismatch&#xA;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;W: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Total &lt;a href=&quot;http://pastebin.ubuntu.com/14310062/plain/&quot; rel=&quot;noreferrer&quot;&gt;error&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3617" LastEditorUserId="2708" LastEditDate="2015-12-31T13:04:35.417" LastActivityDate="2022-01-07T09:06:32.997" Title="Update error (sudo apt-get update)" Tags="|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3781" PostTypeId="2" ParentId="3780" CreationDate="2015-12-31T13:10:05.557" Score="10" Body="&lt;p&gt;With reference to your other &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3774/skype-cant-install-it-on-freya&quot;&gt;post&lt;/a&gt;, you have followed &lt;a href=&quot;https://askubuntu.com/questions/343047/installing-skype-on-ubuntu-13-04-64-bit&quot;&gt;this AU post&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve the error open terminal and run:    &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove &quot;deb http://archive.canonical.com/ $(lsb_release -sc) partner&quot;&#xA;sudo add-apt-repository --remove ppa:versable/elementary-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For hash sum mismatch run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2015-12-31T13:36:08.030" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3782" PostTypeId="2" ParentId="3774" CreationDate="2015-12-31T15:37:38.470" Score="4" Body="&lt;p&gt;This is the normal result (&lt;code&gt;unmet dependencies&lt;/code&gt;) with &lt;code&gt;apt-get&lt;/code&gt; when there is a need to remove or replace a package with its other arch. The message is clear in &lt;code&gt;aptitude&lt;/code&gt; command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  xdg-user-dirs : Conflicts: xdg-user-dirs:i386 but 0.15-1ubuntu3+elementary4~ubuntu14.04.1 is to be installed.&#xA;  xdg-user-dirs:i386 : Conflicts: xdg-user-dirs but 0.15-1ubuntu3+elementary4~ubuntu14.04.1 is installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install xdg-user-dirs-gtk with i386 arch and let it replace amd64 one.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xdg-user-dirs-gtk:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should remove only two packages and install two. Removes: &lt;code&gt;xdg-user-dirs-gtk:amd64&lt;/code&gt; &amp;amp; &lt;code&gt;xdg-user-dirs:amd64&lt;/code&gt; , Installs: &lt;code&gt;xdg-user-dirs-gtk:i386&lt;/code&gt; &amp;amp; &lt;code&gt;xdg-user-dirs:i386&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now, install skype&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work try to install Skype without recommended packages.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --no-install-recommends skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Usually recommended packages are for medium options)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here the information requested that help debug the problem:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Check if all repository components and update channels enabled&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep -r &quot;^deb&quot; /etc/apt/sources.list*&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Trace the dependency resolver using apt debug option&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get -s -o Debug::pkgProblemResolver=yes install skype-bin&#xA;echo q | aptitude -s install skype&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The available versions of conflict package&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy xdg-user-dirs xdg-user-dirs-gtk xdg-user-dirs:i386 xdg-user-dirs-gtk:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;However, I still think that this a bug in a package dependency.&lt;/p&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2016-01-01T05:15:39.300" LastActivityDate="2016-01-01T05:15:39.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3783" PostTypeId="1" AcceptedAnswerId="3786" CreationDate="2015-12-31T16:35:24.570" Score="0" ViewCount="1369" Body="&lt;p&gt;Black screen after boot after changing adding something to conf folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I added a &lt;code&gt;xorg.conf.d&lt;/code&gt; file called &quot;50-gamma.conf&quot; which contains:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;display-setup-script=xrandr --output eDP1 -- gamma 1:0.93:1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I restarted my computer and it boots to a black screen. What happened?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instruction of the second answer from: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/633455/xrandr-not-saving-settings-permanetly-in-ubuntu-14-04&quot;&gt;https://askubuntu.com/questions/633455/xrandr-not-saving-settings-permanetly-in-ubuntu-14-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-01T03:44:40.243" Title="Black screen on boot after adding something to xorg.conf folder" Tags="|boot|display|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3784" PostTypeId="2" ParentId="3771" CreationDate="2015-12-31T18:00:01.470" Score="2" Body="&lt;p&gt;At least to create a new folder you can use &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;N&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="2708" LastEditDate="2016-01-03T01:40:19.197" LastActivityDate="2016-01-03T01:40:19.197" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3785" PostTypeId="1" CreationDate="2015-12-31T21:16:42.677" Score="2" ViewCount="368" Body="&lt;p&gt;After following the instructions here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3679/how-to-adjust-display-colors-in-elementary-os&quot;&gt;How to adjust display colors in elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saved xrandr settings by making run it as a startup application. The settings I set for gamma automatically revert to default after deleting random fold(weird). Is this a bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; This actually happens if you set using xgamma or xrandr as startup application or set them through the terminal. You can set xgamma and xrandr through terminal and then delete any random folder and it will also cause gamma settings set through xrandr to revert back to default. But this only happens once per startup. After setting gamma again and then deleting folders won't cause gamma to revert to default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Scenarios where gamma reverts to default:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Deleting random files after initially setting gamma through either xrandr or xgamma. After that if you set the gamma through xrandr or xgamma again, it no longer reverts back to default gamma values; this only happens for the first time you delete a folder or file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Each time you set gamma through xrandr or xgamma, suspend the computer, unsuspend the computer, then log back into your desktop and your gamma will revert to default.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3561" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-15T09:24:25.247" Title="xrandr and xgamma settings reverted after deleting random files and suspending computer" Tags="|display|folder|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3786" PostTypeId="2" ParentId="3783" CreationDate="2016-01-01T03:08:00.040" Score="1" Body="&lt;p&gt;I am going to provide you a solution to get back from black screen. The black screen is caused by the &lt;code&gt;.conf&lt;/code&gt; file that you have created. First remove it, it will solve the issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt; : &lt;em&gt;I have tested this solution&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step-1: Restart system. Go to  advanced options --&gt; select recovery mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;step-2: &#xA;  Now using the arrow keys scroll down to &lt;strong&gt;root&lt;/strong&gt; and then hit  &lt;kbd&gt;enter&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/s3unH.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step-3: Run the following commands to remove:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -rw -o remount /&#xA;rm -rf /usr/share/X11/xorg.conf.d/50-gamma.conf &#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Explanation: The first command changes permission, second remove file you have created.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note: &lt;a href=&quot;https://askubuntu.com/questions/649217/if-i-follow-instruction-from-blog-web-is-that-always-safe/649244#649244&quot;&gt;If I follow instruction from blog/web, is that always safe?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-01-01T03:14:54.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3788" PostTypeId="2" ParentId="3754" CreationDate="2016-01-01T09:56:52.323" Score="2" Body="&lt;p&gt;This is not a complete GUI information, but the next solution to it, I think. On &lt;a href=&quot;http://rrevanth.github.io/blog/elementary-contracts&quot; rel=&quot;nofollow&quot;&gt;Github&lt;/a&gt; there are contracts among other for video and audio information: Create a file in &lt;code&gt;/usr/share/contractor&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open Scratch as root &lt;code&gt;gksudo scratch-text-editor&lt;/code&gt; (in order to create the file in &lt;code&gt;/usr/share/contractor&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Create a new file and copy and paste following lines.&lt;/li&gt;&#xA;&lt;li&gt;Save as &lt;code&gt;mediainfo.contract&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Log out.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For video:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Media info&#xA;Icon=video&#xA;Description=media info&#xA;MimeType=video&#xA;Exec=gnome-terminal --window-with-profile=new1 -e &quot;mediainfo -i %f&quot;&#xA;Gettext-Domain=pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For audio:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Media info&#xA;Icon=video&#xA;Description=media info&#xA;MimeType=audio&#xA;Exec=gnome-terminal --window-with-profile=new1 -e &quot;mediainfo -i %f&quot;&#xA;Gettext-Domain=pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; Seems that Scratch does not create the right file type, so use gedit instead.&lt;/p&gt;&#xA;" OwnerUserId="34" LastEditorUserId="2708" LastEditDate="2016-01-01T12:26:08.193" LastActivityDate="2016-01-01T12:26:08.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3790" PostTypeId="2" ParentId="3779" CreationDate="2016-01-01T12:57:39.597" Score="0" Body="&lt;p&gt;Its probably better to install Windows first and then linux. But if you already have a linux system and want to dual boot with Windows then you can follow steps mentioned here: &lt;a href=&quot;https://askubuntu.com/a/163249&quot;&gt;https://askubuntu.com/a/163249&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-01T12:57:39.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3791" PostTypeId="1" AcceptedAnswerId="3799" CreationDate="2016-01-01T13:28:30.143" Score="4" ViewCount="734" Body="&lt;p&gt;I'm not sure whether to ask this question on this site or on StackOverflow, because although this is programming related, I suspect that the behavior is influenced by the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I have decided to study creating software for Elementary OS, using the language and library they recommend -- Vala and GTK+.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is, why is the GTK Window set default size function &lt;code&gt;&amp;lt;GTKWindow&amp;gt;.set_default_size(w, h)&lt;/code&gt; not working the way it should be when running the program normally, whereas working correctly when running the program under elevated privileges (sudo).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a screen capture to better explain the situation:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6e3pj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6e3pj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Image: The program with the larger window is run with sudo, while the smaller one is run without sudo&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The code, is fairly simple; I just copied it from Elementary OS development guide:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;using Gtk;&#xA;&#xA;//Program entry point.&#xA;int main (string[] args){&#xA;    Gtk.init (ref args);&#xA;&#xA;    //Create GTK Window.&#xA;    var window = new Gtk.Window ();&#xA;    window.title = &quot;Hello World! From Vala.&quot;;&#xA;    window.set_position (Gtk.WindowPosition.CENTER);&#xA;    window.set_default_size (550, 450);&#xA;    window.destroy.connect (Gtk.main_quit);&#xA;&#xA;    window.show_all ();&#xA;&#xA;    Gtk.main ();&#xA;&#xA;    return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The window's client area is (444, 318) without su, and (550, 450) if under su.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone who can explain why is happening? How can I make the default size correct even without su?&lt;/p&gt;&#xA;" OwnerUserId="3620" LastActivityDate="2016-01-02T02:02:00.203" Title="GTK+ Incorrect Window Size" Tags="|gtk|vala|sudo|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3792" PostTypeId="2" ParentId="3779" CreationDate="2016-01-01T13:47:02.547" Score="5" Body="&lt;p&gt;It is a bit tricky. Once you install Windows alongside with Linux (or vice versa) you will mess up GRUB. So, the way I do it, and it is REALLY EASY, is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1- Install the OS that you want. Don't mind GRUB for now. Install as many Windows as you want, as many Linux as you want (I have elementary and 3 Windows)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2- After the installation, boot ubuntu/elementary from the CD (or flash drive) and select &quot;Try elementary/ubuntu&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3- Now you only have to download,install and run &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;noreferrer&quot;&gt;Boot-Repair&lt;/a&gt;. Use the &quot;PPA&quot; to install Boot-Repair (it will be the 2nd Option).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4- Remove the CD/flash drive and reboot your PC.&lt;/p&gt;&#xA;" OwnerUserId="1181" LastActivityDate="2016-01-01T13:47:02.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3793" PostTypeId="1" CreationDate="2016-01-01T15:18:08.857" Score="0" ViewCount="188" Body="&lt;p&gt;I saw the release date of the latest HD4600 driver which is on intel's official website is on 2013/8/29, doesn't it mean that they haven't updated it for Linux since 2013/8/29?&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-01-01T15:46:43.917" LastActivityDate="2016-01-01T15:46:50.213" Title="Does intel update their driver for GNU/Linux?" Tags="|graphic-drivers|intel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3794" PostTypeId="2" ParentId="3793" CreationDate="2016-01-01T15:46:50.213" Score="1" Body="&lt;p&gt;Intel drivers are open source and always the newest in repos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See the links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://01.org/linuxgraphics&quot; rel=&quot;nofollow&quot;&gt;https://01.org/linuxgraphics&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://01.org/linuxgraphics/downloads&quot; rel=&quot;nofollow&quot;&gt;https://01.org/linuxgraphics/downloads&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recommended reading:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1734/how-do-i-install-the-latest-intel-linux-graphics&quot;&gt;How do I install the latest Intel Linux Graphics?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess you are looking at &lt;a href=&quot;https://downloadcenter.intel.com/download/13815/Intel-Graphics-Drivers-for-Linux-&quot; rel=&quot;nofollow&quot;&gt;this page&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-01T15:46:50.213" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3796" PostTypeId="2" ParentId="3791" CreationDate="2016-01-01T21:14:41.783" Score="1" Body="&lt;p&gt;I found the effective &lt;code&gt;env&lt;/code&gt; variable: &lt;code&gt;GTK_CSD=1&lt;/code&gt; , you can verify:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo GTK_CSD=1 ./yourprogram&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;GTK_CSD=&quot;&quot; ./yourprogram&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The GTK Client-Side Decorations enabled by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo grep -r GTK_CSD /etc/&#xA;/etc/profile.d/gtk-csd.sh:export GTK_CSD=1&#xA;&#xA;$ dpkg -S /etc/profile.d/gtk-csd.sh&#xA;elementary-default-settings: /etc/profile.d/gtk-csd.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I didn't notice such size issue in the other desktops, you probably right about submiting a bug report.&lt;/p&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2016-01-01T21:14:41.783" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3797" PostTypeId="2" ParentId="3791" CreationDate="2016-01-01T21:38:25.253" Score="-2" Body="&lt;p&gt;This isn't a elementary OS bug. It happen when you haven't child widgets into your window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try adding :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;window.set_resizable (false);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-01-01T21:38:25.253" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3798" PostTypeId="1" CreationDate="2016-01-02T00:01:17.320" Score="1" ViewCount="19" Body="&lt;p&gt;I am using Slack amongst other software on Elementary. When I hit the 'x' it is supposed to minimize to the tray. When I try to do this, I cannot see any icon in the system tray. But I still get notifications, so I know that it is still running. How do I fix this, so that I can see the icon?&lt;/p&gt;&#xA;" OwnerUserId="3622" LastActivityDate="2016-01-02T00:01:17.320" Title="Cannot see system tray on Elementary OS Freyja 0.3.2" Tags="|icons|wingpanel|" AnswerCount="0" CommentCount="2" ClosedDate="2016-01-02T04:34:39.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="3799" PostTypeId="2" ParentId="3791" CreationDate="2016-01-02T02:02:00.203" Score="3" Body="&lt;p&gt;One of these windows is using client-side decorations and the other is using sever-side decorations. There is a bug right now where client-side decorations include the shadow as part of the window geometry. Which technically it is, but the toolkit should compensate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Starting in Loki (because of the newer libmutter version), all windows will be drawn with this client-side decoration method. There will no longer be a configuration option. We decided to opt-in early in Freya, but the configuration option is only set for regular user accounts.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-02T02:02:00.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3800" PostTypeId="2" ParentId="2279" CreationDate="2016-01-02T04:57:32.793" Score="0" Body="&lt;p&gt;I have solved the issue by running following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dkms&#xA;sudo /etc/init.d/vboxdrv setup # message in error popup. &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-02T04:57:32.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3802" PostTypeId="1" CreationDate="2016-01-02T05:55:17.997" Score="2" ViewCount="165" Body="&lt;p&gt;I have an HP Stream 11 Netbook, that I used to run Xubuntu on for about half a year.  I decided to switch to freya, but have been having connectivity problems.  The WiFi signal will drop out, but the indicator shows that I am still connected. Restarting, solves the problem for about 5 minutes then happens again.  Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="86" LastEditorUserId="3757" LastEditDate="2016-04-11T02:28:58.893" LastActivityDate="2016-04-11T02:28:58.893" Title="wifi drops signal, but indicator shows connected" Tags="|release-freya|networking|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3803" PostTypeId="2" ParentId="938" CreationDate="2016-01-02T09:16:18.423" Score="2" Body="&lt;p&gt;The simple GUI solution:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;code&gt;gnome-system-tools&lt;/code&gt; from software center or with terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-system-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;users and groups&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2ns5c.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the user ( your user name, if multiple users present)  and click on &lt;kbd&gt;Manage Groups&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A pop-up will appear, select &lt;code&gt;vboxusers&lt;/code&gt; and click on &lt;kbd&gt;properties&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lhzKz.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now check (enable) your user name. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/toBMF.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;logout and login.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now open vbox --&gt; settings --&gt; Usb &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6r3YN.png&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also enable via advanced options in &lt;code&gt;users and groups&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to advanced options --&gt; User privileges tab --&gt; check Use Virtualbox virtualization solution (last in the list)&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-03T01:38:48.473" LastActivityDate="2016-01-03T01:38:48.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3804" PostTypeId="2" ParentId="3333" CreationDate="2016-01-02T13:17:56.147" Score="1" Body="&lt;p&gt;If you want to install phpMyAdmin, follow this tutorial: &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-and-secure-phpmyadmin-on-ubuntu-12-04&quot; rel=&quot;nofollow&quot;&gt;https://www.digitalocean.com/community/tutorials/how-to-install-and-secure-phpmyadmin-on-ubuntu-12-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastActivityDate="2016-01-02T13:17:56.147" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3805" PostTypeId="1" AcceptedAnswerId="3812" CreationDate="2016-01-02T13:33:17.577" Score="2" ViewCount="294" Body="&lt;p&gt;On the right click menu in Files, in &quot;New&quot; option I have custom folders and file items. How can I remove them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QfBiM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QfBiM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="45" LastEditDate="2016-01-02T21:23:32.300" LastActivityDate="2016-01-02T21:23:32.300" Title="How can I edit the &quot;New&quot; sub menu when I right click in Files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3807" PostTypeId="1" AcceptedAnswerId="3813" CreationDate="2016-01-02T15:07:52.937" Score="2" ViewCount="56" Body="&lt;p&gt;In nautilus there is &lt;code&gt;nautilus-pastebin&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;nautilus-pastebin is a Nautilus extension written in Python, which&#xA;  allows users to upload text-only files to a pastebin service just&#xA;  by right-clicking on them.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2k5Cr.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Is there any such feature in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="45" LastEditDate="2016-01-03T02:21:58.733" LastActivityDate="2016-01-03T02:25:12.250" Title="Can I get a menu item for Pastebin in Files?" Tags="|pantheon-files|extensions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3808" PostTypeId="1" CreationDate="2016-01-02T15:27:46.427" Score="1" ViewCount="1898" Body="&lt;p&gt;Does &lt;code&gt;pantheon-files&lt;/code&gt; support extensions and plugins, like nautilus do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, please mention &lt;em&gt;few&lt;/em&gt; extensions or let me know (provide link ) where can I get those list of &lt;em&gt;all&lt;/em&gt; extensions. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In nautilus I was able to get the list of extensions by the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wajig search nautilus | grep extens&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above way not working for pantheon-files. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-06T02:07:11.630" LastActivityDate="2017-11-04T16:16:47.543" Title="Does `pantheon-files` support extensions and plugins?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3809" PostTypeId="1" CreationDate="2016-01-02T16:15:06.297" Score="11" ViewCount="2435" Body="&lt;p&gt;While I did / do not mind supporting your efforts, I am not really in favor of paying again if I need to download elementary again, for instance for a clean reinstall, or just to always have the current release on hand in full form.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I download without paying again?&lt;/p&gt;&#xA;" OwnerUserId="3626" LastEditorUserId="2708" LastEditDate="2016-01-03T02:42:47.770" LastActivityDate="2018-08-01T13:49:50.637" Title="How can I (re-)download without paying (again)?" Tags="|elementary-website|download|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="3810" PostTypeId="2" ParentId="2838" CreationDate="2016-01-02T17:26:34.423" Score="0" Body="&lt;p&gt;One other thing to note here is that if you are using Nvidia Graphics card with Optimus Technology and you are running official drivers. If you go to Nvidia X Server Settings, under PRIME profiles, you can select the Power Saving Mode which disables your Nvidia card and uses the motherboard's graphic card instead. This is essentially what Bumblebee does (kind of). This should also prolong your battery life. One thing to be mindful of here is that this could disable the graphics port connected to the card. For my laptop, this was the HDMI port; thankfully, the mini-display port is connected to the Intel Graphics card.&lt;/p&gt;&#xA;" OwnerUserId="3622" LastActivityDate="2016-01-02T17:26:34.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3811" PostTypeId="2" ParentId="3809" CreationDate="2016-01-02T19:24:15.140" Score="11" Body="&lt;p&gt;Firstly, thank you very much for supporting development by purchasing a copy of elementary OS. It's our primary source of income and the vast majority of people choose to never pay anything. So we really appreciate your initial payment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you ever need to re-download elementary OS, you can always click the &quot;custom&quot; button and type in &quot;0&quot;. This will completely bypass the payment dialog.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I do please ask that for new versions you consider a small payment. Without continued funding, our development pace and infrastructure will be impacted.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-02T19:24:15.140" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3812" PostTypeId="2" ParentId="3805" CreationDate="2016-01-02T21:06:29.743" Score="2" Body="&lt;p&gt;This menu is populated from the &quot;Templates&quot; folder in your Home. You can add files and folders here to create submenus and items. If you'd like to remove those items, you must remove them from the &quot;Templates&quot; folder.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-02T21:06:29.743" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3813" PostTypeId="2" ParentId="3807" CreationDate="2016-01-02T21:10:18.770" Score="2" Body="&lt;p&gt;Nautilus and Files do not share any code. Any extensions written for Nautilus are not compatible with Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a package called &quot;&lt;a href=&quot;https://code.launchpad.net/~elementary-os/+recipe/webcontracts-daily&quot; rel=&quot;nofollow&quot;&gt;webcontracts&lt;/a&gt;&quot; that provides Pastebin through a system service called Contractor among other things. You can download a .deb from the link or install through the &lt;a href=&quot;https://code.launchpad.net/~elementary-os/+archive/ubuntu/daily&quot; rel=&quot;nofollow&quot;&gt;unstable daily PPA&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-01-03T02:25:12.250" LastActivityDate="2016-01-03T02:25:12.250" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3815" PostTypeId="1" CreationDate="2016-01-03T06:56:30.387" Score="0" ViewCount="341" Body="&lt;p&gt;I am trying to install Lazarus.  I tried the one in the software center but it is old and complains about a missing directory.  So I downloaded the latest .deb file and tried to install that but it says it can't satisfy the dependencies.  I have no problems install it on Ubuntu, but I hate the Unity DE.  Please help.  I like Elementary, but this is driving me crazy.&lt;/p&gt;&#xA;" OwnerUserId="3632" LastActivityDate="2017-02-17T17:52:45.107" Title="Lazarus 1.4 can't install" Tags="|ide|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3816" PostTypeId="1" CreationDate="2016-01-03T08:02:23.950" Score="1" ViewCount="1204" Body="&lt;p&gt;I cannot access the desktop on my Windows XP installation. It won't even start on secure mode. I just want to know so I can install a Linux distro.&lt;/p&gt;&#xA;" OwnerUserId="3633" LastEditorUserId="5565" LastEditDate="2016-10-07T02:24:44.657" LastActivityDate="2016-10-07T03:04:08.863" Title="How can I erase everything when installing elementary OS?" Tags="|system-installation|disk-management|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3817" PostTypeId="2" ParentId="3816" CreationDate="2016-01-03T08:54:18.453" Score="2" Body="&lt;p&gt;When installing elementary there is a &lt;kbd&gt;use entire hard drive&lt;/kbd&gt; or &lt;kbd&gt;erase disk and install elementary os&lt;/kbd&gt; option. This will destroy both your Windows installation and &lt;strong&gt;any files you have saved there&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-01-03T08:54:18.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3818" PostTypeId="1" CreationDate="2016-01-03T13:48:55.623" Score="2" ViewCount="255" Body="&lt;p&gt;Here is a video demonstrating the issue: &lt;a href=&quot;https://youtu.be/FImJp1gqaeg&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/FImJp1gqaeg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've mostly observed it in connection to full screen applications/games such as Factorio, Dota 2, etc.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Questions&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;What might be going wrong? Can this be an issue with elementary's gala/plank? Or something else?&lt;/li&gt;&#xA;&lt;li&gt;Is this a known issue? I've tried searching for &lt;strong&gt;elementary OS &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;TAB&lt;/kbd&gt; bug&lt;/strong&gt; and similar keywords, didn't find anything. Have anyone of you encountered it before? It is very much reproducible on my system, so I'd be happy to open a bug report and/or give further details on the issue that can help tracking it down.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Any answers, help, pointers are greatly appreciated. I like using elementary OS as my main OS and hoping that finding a fix for this will make that an even smoother experience.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Misc details&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;elementary OS 0.3.2 Freya&lt;/p&gt;&#xA;" OwnerUserId="2758" LastEditorUserId="3757" LastEditDate="2016-05-07T04:25:57.303" LastActivityDate="2016-05-07T04:25:57.303" Title="What might cause Alt+Tab to get stuck half-way?" Tags="|release-freya|plank|gala|games|" AnswerCount="0" CommentCount="5" ClosedDate="2016-12-28T18:58:56.500" ContentLicense="CC BY-SA 3.0" />
  <row Id="3819" PostTypeId="1" CreationDate="2016-01-03T17:47:19.803" Score="6" ViewCount="1272" Body="&lt;p&gt;When launching Midori, and several other programs from Terminal, I get the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-uyN7DFK2Jm: Connection refused&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3636" LastEditorUserId="75" LastEditDate="2016-03-16T09:52:45.540" LastActivityDate="2016-03-16T09:52:45.540" Title="Couldn't connect to accessibility bus: Failed to connect to socket" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3820" PostTypeId="2" ParentId="3819" CreationDate="2016-01-03T17:49:20.343" Score="5" Body="&lt;p&gt;Apparently this is an issue with certain programs (such as Midori) leveraging GTK3 extensions. The software funtions normally, and the error can be suppressed by pasting the following into Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export NO_AT_BRIDGE=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I added mine to &lt;code&gt;/etc/rc.local&lt;/code&gt; and it supressed the errors automatically.&lt;/p&gt;&#xA;" OwnerUserId="3636" LastEditorUserId="2708" LastEditDate="2016-01-03T17:53:09.627" LastActivityDate="2016-01-03T17:53:09.627" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3822" PostTypeId="1" CreationDate="2016-01-03T20:06:01.220" Score="2" ViewCount="414" Body="&lt;p&gt;I used the answer on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1946/have-application-menu-open-up-with-only-windows-key&quot;&gt;Have application menu open up with only Windows key&lt;/a&gt; to open the applications dock with Win key (works perfectly). Is there a way to have it close again using Win key? It just stays there unless I manually click somewhere else on the screen.&lt;/p&gt;&#xA;" OwnerDisplayName="user3637" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-04-29T11:14:06.917" Title="Have applications dock close with Windows key" Tags="|applications|plank|window-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3823" PostTypeId="1" AcceptedAnswerId="3826" CreationDate="2016-01-03T21:17:04.243" Score="4" ViewCount="4788" Body="&lt;p&gt;I have downloaded Android Studio for Linux and extracted it using GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions for install are &lt;a href=&quot;https://elementaryos.stackexchange.com/revisions/b1b8efaa-98a5-4527-83dc-c02ea7e3bdbc/view-source&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd Downloads&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;puts my directory to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;thomasshera@thomasshera-Satellite-Radius-P55W-B:~/Downloads$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then the second command &quot; ./studio.sh&quot; gives me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;bash: ./studio.sh: No such file or directory&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT 1&lt;/em&gt;: Ravan, it gives me this error message;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR: Cannot start Android Studio&#xA;No JDK found. Please validate either STUDIO_JDK, JDK_HOME or JAVA_HOME environment variable points to valid JDK installation.&#xA;thomasshera@thomasshera-Satellite-Radius-P55W-B:~/Downloads/android-studio/bin$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT 2&lt;/em&gt;: output of java -version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The program 'java' can be found in the following packages:&#xA;* default-jre&#xA;* gcj-4.8-jre-headless&#xA;* openjdk-7-jre-headless&#xA;* gcj-4.6-jre-headless&#xA;* openjdk-6-jre-headless&#xA;Try: sudo apt-get install &amp;lt;selected package&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT 3&lt;/em&gt;: new output of &lt;code&gt;java -version&lt;/code&gt; after installing JDK:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;java version &quot;1.7.0_91&quot;&#xA;OpenJDK Runtime Environment (IcedTea 2.6.3) (7u91-2.6.3-0ubuntu0.14.04.1)&#xA;OpenJDK 64-Bit Server VM (build 24.91-b01, mixed mode)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT 4&lt;/em&gt;: response of first part of Ravan's CLI install for JDK.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Important!!! For now, you should continue to use Java 8 because Oracle Java 9 is available as an early access release (it should be released in 2016)! You should only use Oracle Java 9 if you explicitly need it, because it may contain bugs and it might not include the latest security patches! Also, some Java options were removed in JDK9, so you may encounter issues with various Java apps. More information and installation instructions (Ubuntu / Linux Mint / Debian): &lt;a href=&quot;http://www.webupd8.org/2015/02/install-oracle-java-9-in-ubuntu-linux.html&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2015/02/install-oracle-java-9-in-ubuntu-linux.html&lt;/a&gt;&#xA;   More info: &lt;a href=&quot;https://launchpad.net/~webupd8team/+archive/ubuntu/java&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/~webupd8team/+archive/ubuntu/java&lt;/a&gt;&#xA;  Press [ENTER] to continue or ctrl-c to cancel adding it&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user3637" LastEditorUserId="2708" LastEditDate="2016-01-05T02:44:24.590" LastActivityDate="2016-01-05T02:44:24.590" Title="Unable to install Android Studio on elementary OS" Tags="|development|android|ide|android-studio|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3826" PostTypeId="2" ParentId="3823" CreationDate="2016-01-04T03:22:21.263" Score="2" Body="&lt;p&gt;I have very recently installed Android studio,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;GUI&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the Android Studio for linux, place it in home directory. (Not mandatory, but prefer)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unpack the downloaded ZIP, right click and click extract here.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;code&gt;android-studio&lt;/code&gt; --&gt; &lt;code&gt;bin&lt;/code&gt; --&gt; click on &lt;code&gt;studio.sh&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;CLI:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download  the Android Studio for linux, then run the commands to install.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install unzip #if needed.&#xA;cd [location_of_Android_Studio_zip_file]&#xA;unzip android-studio-ide-141.2456560-linux.zip # replace with your zip file name.&#xA;cd android-studio/bin/&#xA;./studio.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;bash: ./studio.sh: No such file or directory&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You are not in correct directory. If you have Android studio in &lt;code&gt;~/Downloads&lt;/code&gt; folder, you have to navigate to &lt;code&gt;~/Downloads/android-studio/bin&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to check use &lt;code&gt;file file_name&lt;/code&gt; like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Wrong directory&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~$ file studio.sh&#xA;studio.sh: ERROR: cannot open `studio.sh' (No such file or directory)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Corect directory&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ravan@ravan:~/android-studio/bin$ file studio.sh&#xA;studio.sh: POSIX shell script, ASCII text executable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;http://developer.android.com/sdk/index.html#Requirements&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; for system requirements. You have to install java JDK (atleast 7).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install java:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt-get update&#xA;sudo apt-get install oracle-java8-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install oracle-java8-set-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-04T13:57:24.660" LastActivityDate="2016-01-04T13:57:24.660" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3827" PostTypeId="1" CreationDate="2016-01-04T09:54:13.630" Score="0" ViewCount="398" Body="&lt;p&gt;I have Ubuntu as my OS for active development, I was wondering if elementary OS could replace it. I faced a few problems in using nodejs on elementary OS and was wondering if it'd be a good choice. &lt;/p&gt;&#xA;" OwnerUserId="1002" LastEditorUserId="34" LastEditDate="2016-01-04T21:56:52.697" LastActivityDate="2016-01-11T11:56:26.867" Title="How good of a support does elementary OS offer for development?" Tags="|development|web-development|" AnswerCount="2" CommentCount="2" ClosedDate="2016-01-05T09:50:47.373" ContentLicense="CC BY-SA 3.0" />
  <row Id="3828" PostTypeId="2" ParentId="3827" CreationDate="2016-01-04T10:13:16.293" Score="2" Body="&lt;p&gt;If you try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache policy nodejs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will know that &lt;code&gt;nodejs&lt;/code&gt; is the same one used in Ubuntu and it is downloaded from Ubuntu official site.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;For bugs, you can report them to &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/nodejs&quot; rel=&quot;nofollow&quot;&gt;bugs.launchpad.net&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you have questions, they are off-topic in &lt;a href=&quot;https://askubuntu.com/&quot;&gt;Ask Ubuntu&lt;/a&gt;, it does not support derived distributions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You better ask here in &lt;a href=&quot;https://elementaryos.stackexchange.com/&quot;&gt;Elementary OS (Stack Exchange)&lt;/a&gt; or &lt;a href=&quot;https://answers.launchpad.net/ubuntu/+source/nodejs&quot; rel=&quot;nofollow&quot;&gt;answers.launchpad.net&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should ask in &lt;a href=&quot;https://stackoverflow.com/&quot;&gt;Stack Overflow&lt;/a&gt; if it is a generic programming question.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2016-01-04T21:44:16.737" LastActivityDate="2016-01-04T21:44:16.737" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3829" PostTypeId="1" AcceptedAnswerId="3830" CreationDate="2016-01-04T11:01:33.440" Score="4" ViewCount="3540" Body="&lt;p&gt;I am using freya. I have installed Android Studio. I don't find it in application menu. Every time I have to use &lt;code&gt;studio.sh&lt;/code&gt; manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I launch it directly from app menu and from terminal ?&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-08T02:43:13.923" LastActivityDate="2018-05-09T09:11:22.103" Title="How to launch Android Studio in elementary OS" Tags="|release-freya|development|android|ide|android-studio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3830" PostTypeId="2" ParentId="3829" CreationDate="2016-01-04T11:01:33.440" Score="7" Body="&lt;p&gt;&lt;strong&gt;To launch from Applications menu&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Option 1&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;First Open Android Studio&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &quot;Configure&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6XLl0.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on &quot;Create Desktop Entry&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/AC51K.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now you can launch it from applications menu.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Option 2&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Creating &lt;code&gt;.desktop&lt;/code&gt; file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano /usr/share/applications/jetbrains-studio.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Copy paste the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Android Studio&#xA;Icon=/path/to/android-studio/bin/studio.png&#xA;Exec=&quot;/path/to/android-studio/bin/studio.sh&quot; %f&#xA;Comment=Develop with pleasure!&#xA;Categories=Development;IDE;&#xA;Terminal=false&#xA;StartupWMClass=jetbrains-studio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: Replace &lt;code&gt;/path/to&lt;/code&gt; with exact path.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To launch from terminal&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to just create a &lt;a href=&quot;https://en.wikipedia.org/wiki/Symbolic_link&quot; rel=&quot;noreferrer&quot;&gt;symlink&lt;/a&gt;. Create it in &lt;code&gt;/usr/local/bin&lt;/code&gt;. All you need is to run the command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general syntax is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /full/path/to/your/file /usr/local/bin/name_of_new_command&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command: (After replacing correct path)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s ~/android-studio/bin/studio.sh /usr/local/bin/studio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now open terminal and run &lt;code&gt;studio&lt;/code&gt; to launch.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-08T02:39:31.443" LastActivityDate="2016-01-08T02:39:31.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3831" PostTypeId="2" ParentId="3827" CreationDate="2016-01-04T13:26:24.850" Score="2" Body="&lt;p&gt;The elementaryOS support for development is as good as Ubuntu, as a derivative distribution should be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, because the current version of elementaryOS is based on a stable (thus relatively old) release, it may not have the newer libraries like Gtk 3.18. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use elementaryOS for active development on Mono/C# and have no problem with it. Don't know much about the NodeJS environment, you may need to make sure the native libraries your &lt;em&gt;npm&lt;/em&gt; packages use (if any) are available on Ubuntu 14.04.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastEditorUserId="2708" LastEditDate="2016-01-11T11:56:26.867" LastActivityDate="2016-01-11T11:56:26.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3833" PostTypeId="1" AcceptedAnswerId="3834" CreationDate="2016-01-04T14:31:26.410" Score="1" ViewCount="2310" Body="&lt;p&gt;I have tried to install Android Studio and my Android Studio setup says this :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;Unable to run mksdcard SDK tool&quot;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -a&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;x86_64&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="3757" LastEditDate="2016-05-05T13:34:30.910" LastActivityDate="2016-05-05T13:34:30.910" Title="&quot;Unable to run mksdcard SDK tool&quot; error while installing android studio" Tags="|release-freya|android|ide|android-studio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3834" PostTypeId="2" ParentId="3833" CreationDate="2016-01-04T14:31:26.410" Score="0" Body="&lt;p&gt;I have solved the issue from the fix suggested for &quot;&lt;a href=&quot;https://code.google.com/p/android/issues/detail?id=82711&quot; rel=&quot;nofollow&quot;&gt;Issue 82711&lt;/a&gt;&quot; by installing the following  32-bit binaries&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;http://developer.android.com/sdk/installing/index.html?pkg=studio&quot; rel=&quot;nofollow&quot;&gt;set up Android Studio on Linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Note: You may also need to install the ia32-libs, lib32ncurses5-dev, and lib32stdc++6 packages. These packages are required to support 32-bit apps on a 64-bit machine.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ia32-libs lib32ncurses5-dev lib32stdc++6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-04T14:36:50.367" LastActivityDate="2016-01-04T14:36:50.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3836" PostTypeId="1" AcceptedAnswerId="3841" CreationDate="2016-01-04T16:47:51.810" Score="3" ViewCount="3047" Body="&lt;p&gt;I have installed &lt;code&gt;nemo&lt;/code&gt; file manager and wanted to enable desktop icons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see on the screenshot the desktop is looking like a normal window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how to fix that? I'm running elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/NXzkG.jpg&quot; alt=&quot;nemo as desktop manager screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="3646" LastEditorUserId="37" LastEditDate="2016-01-04T21:13:12.080" LastActivityDate="2017-02-10T18:05:39.493" Title="nemo desktop icons on elementary os" Tags="|desktop|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3837" PostTypeId="2" ParentId="3836" CreationDate="2016-01-04T17:04:10.637" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/nemo.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For this you need administrator privilege, and change:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec = nemo --no-desktop %U&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also check in &lt;code&gt;~/.local/share/applications/&lt;/code&gt; folder. If there is nemo file, make the same changes.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="218" LastEditorUserId="1239" LastEditDate="2016-01-04T20:05:39.897" LastActivityDate="2016-01-04T20:05:39.897" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3838" PostTypeId="2" ParentId="3702" CreationDate="2016-01-04T20:24:54.637" Score="1" Body="&lt;p&gt;Known: Yes, Fixed: Seem Not Yet as there is a bug report still open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1488183&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/gala/+bug/1488183&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can register in launchpad and flag that bug as it does affect you. So it will get more light.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems there is some other users facing same bug:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2pyn3d/gala_high_memory_usage_temporary_workaround/&quot; rel=&quot;nofollow&quot;&gt;Reddit: Gala high memory usage &lt;em&gt;temporary&lt;/em&gt; workaround&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://plus.google.com/+RellonLawrence/posts/Z1iT5bgyk6N&quot; rel=&quot;nofollow&quot;&gt;Google+: Anyone else experiencing a slow memory leak in gala?&lt;/a&gt;﻿&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2016-01-04T20:24:54.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3839" PostTypeId="2" ParentId="2755" CreationDate="2016-01-04T20:45:45.040" Score="1" Body="&lt;p&gt;You can create a script to launch the game that disable hot corners before launching game then enable them back after closing the game.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example, &lt;code&gt;launch_game.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/bash&#xA;&#xA;# Make backup of the settings&#xA;dconf dump /org/pantheon/desktop/gala/behavior/ &amp;gt; ~/.hotcorner.dconf&#xA;&#xA;# Disable hot corner (just reset,as they are disabled by default)&#xA;dconf reset /org/pantheon/desktop/gala/behavior/hotcorner-topright&#xA;dconf reset /org/pantheon/desktop/gala/behavior/hotcorner-topleft&#xA;dconf reset /org/pantheon/desktop/gala/behavior/hotcorner-bottomright&#xA;dconf reset /org/pantheon/desktop/gala/behavior/hotcorner-bottomleft&#xA;&#xA;# Launch the game&#xA;putyourgamecommandhere&#xA;&#xA;# Load back your hot corner settings&#xA;dconf load /org/pantheon/desktop/gala/behavior/ &amp;lt; ~/.hotcorner.dconf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1239" LastActivityDate="2016-01-04T20:45:45.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3840" PostTypeId="1" CreationDate="2016-01-04T21:11:23.823" Score="1" ViewCount="1087" Body="&lt;p&gt;I'm starting to work with elementary OS since a while and I like it very much! Thanks guys! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the last version installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...@eOS:~$ uname -a&#xA;Linux eOS 3.19.0-42-generic #48~14.04.1-Ubuntu SMP Fri Dec 18 10:25:23 UTC 2015 i686 athlon i686 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm trying now to install ownCloud-Client but get some dependency errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...@eOS:~$ sudo apt-get install owncloud-client&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA;  owncloud-client : Depends: libowncloudsync0 (= 2.1.0-1.1) but it is not going to be installed&#xA;               Depends: libstdc++6 (&amp;gt;= 5.2) but 4.8.4-2ubuntu1~14.04 is to be installed&#xA;               Depends: owncloud-client-l10n but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3648" LastEditorUserId="2708" LastEditDate="2016-01-05T02:15:49.510" LastActivityDate="2016-09-08T23:53:44.670" Title="Unable to install ownCloud-Desktop-Client" Tags="|applications|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3841" PostTypeId="2" ParentId="3836" CreationDate="2016-01-04T21:42:27.563" Score="3" Body="&lt;p&gt;There is a decision by elementary os to enable client-side decorations which affect windows not aware of that. See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3799/1239&quot;&gt;GTK+ Incorrect Window Size&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is tested to work for Freya in VBox:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=&quot;&quot; nemo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So modify exec line in the autostart file &#xA;&lt;code&gt;/etc/xdg/autostart/nemo-autostart.desktop&lt;/code&gt; , as below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=sh -c &quot;GTK_CSD=\&quot;\&quot; nemo -n&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=sh -c &quot;GTK_CSD='' nemo -n&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Nluuh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Nluuh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2016-01-06T23:50:33.763" LastActivityDate="2016-01-06T23:50:33.763" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3845" PostTypeId="1" CreationDate="2016-01-05T06:51:33.830" Score="2" ViewCount="978" Body="&lt;p&gt;I am using elementary OS on Dell latitude 3440, it has an inbuilt SD card reader. Elementary OS does not recognize an SD Card. However the same was working under Windows.&lt;/p&gt;&#xA;" OwnerUserId="3654" LastActivityDate="2016-01-05T06:51:33.830" Title="SD Card Reader not recognized" Tags="|drivers|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3847" PostTypeId="2" ParentId="1149" CreationDate="2016-01-05T09:30:35.420" Score="5" Body="&lt;p&gt;If you already havent, install elementary-tweaks (For elementary freya):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Tweaks&lt;/code&gt; &gt; &lt;code&gt;Fonts&lt;/code&gt; and select the Monospace Font you want as well as its size. You can customize many other things as well from here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5kgQP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5kgQP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="218" LastEditDate="2016-12-12T09:32:56.710" LastActivityDate="2016-12-12T09:32:56.710" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3850" PostTypeId="2" ParentId="3840" CreationDate="2016-01-05T11:53:51.737" Score="2" Body="&lt;p&gt;Enter these two commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;sudo apt-get clean&#xA;sudo apt-get autoclean&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try to fix the broken dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;sudo apt-get -f install&#xA;sudo dpkg --configure -a&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And enter again &lt;code&gt;sudo apt-get -f install&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should solve your dependency problems and you can now install &lt;code&gt;owncloud-client&lt;/code&gt; again.&lt;/p&gt;&#xA;" OwnerUserId="2786" LastActivityDate="2016-01-05T11:53:51.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3852" PostTypeId="1" CreationDate="2016-01-05T12:16:32.677" Score="-1" ViewCount="453" Body="&lt;p&gt;I have mouse with good dpi, at Windows settings I can make sensitivity real slow. But in Ubuntu and Elementary settings when I put the slowest value it is not help, the mouse has fast moving anyway. How it fixed? &#xA;Why you will not solve this issue like Kubuntu (look at pic) this is really simple and cool!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XFHX6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XFHX6.png&quot; alt=&quot;Kubuntu Mouse sensitivity settings&quot;&gt;&lt;/a&gt;    &lt;/p&gt;&#xA;" OwnerUserId="3663" LastActivityDate="2016-01-05T14:07:53.367" Title="Mouse acceleration off (REVISION IT)" Tags="|mouse|" AnswerCount="1" CommentCount="0" ClosedDate="2016-01-05T22:05:38.830" ContentLicense="CC BY-SA 3.0" />
  <row Id="3853" PostTypeId="2" ParentId="3852" CreationDate="2016-01-05T14:07:53.367" Score="2" Body="&lt;p&gt;You can turn it to &lt;strong&gt;0&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xset m 00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run this whenever you turn your pc on, or disconnect/connect your mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can run it on startup, by adding it as a startup script (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/351/2786&quot;&gt;guide here&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;#!/bin/bash&#xA;xset m 00&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Give the script a &lt;code&gt;.sh&lt;/code&gt; ending.&lt;/p&gt;&#xA;" OwnerUserId="2786" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-01-05T14:07:53.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3855" PostTypeId="1" CreationDate="2016-01-05T14:33:16.747" Score="0" ViewCount="109" Body="&lt;p&gt;I am using freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to use and configure maya calendar as to-do application. &lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-06-05T20:55:32.657" Title="How to use maya calendar as to-do application" Tags="|release-freya|calendar|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3856" PostTypeId="1" AcceptedAnswerId="3858" CreationDate="2016-01-05T17:27:23.373" Score="4" ViewCount="50868" Body="&lt;p&gt;I cannot put any icons or right click on the desktop in Elementary Freya. How can I enable that?&lt;/p&gt;&#xA;" OwnerUserId="3622" LastEditorUserId="218" LastEditDate="2016-01-06T15:31:42.833" LastActivityDate="2017-02-27T09:48:15.967" Title="How to enable desktop icons and right click in Elementary OS Freya?" Tags="|desktop|user-interface|app-shortcuts|" AnswerCount="1" CommentCount="1" ClosedDate="2016-01-06T17:25:29.923" ContentLicense="CC BY-SA 3.0" />
  <row Id="3857" PostTypeId="1" CreationDate="2016-01-05T19:01:03.810" Score="0" ViewCount="41" Body="&lt;p&gt;Whenever I click the admin account, it will not let me on it and only comes up with my background picture. This has happened for a while as I once turned off my laptop whilst it was going through an upgrade without me knowing. If anyone could help, that would be amazing! &lt;/p&gt;&#xA;" OwnerUserId="3669" LastEditorUserId="5565" LastEditDate="2016-10-07T02:23:47.073" LastActivityDate="2016-10-08T11:56:28.317" Title="When I click Administration account, it will not let me on the account. How can I unlock the settings from the guest account?" Tags="|security|user|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-09T00:05:45.407" ContentLicense="CC BY-SA 3.0" />
  <row Id="3858" PostTypeId="2" ParentId="3856" CreationDate="2016-01-05T19:11:15.127" Score="5" Body="&lt;p&gt;To enable the desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1:&lt;/strong&gt;&lt;br&gt;&#xA;Install Nautilus dconf-tools:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install --no-install-recommends nautilus dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2:&lt;/strong&gt;&lt;br&gt;&#xA;Open dconf-editor and go to,  &lt;code&gt;org&lt;/code&gt; &gt; &lt;code&gt;gnome&lt;/code&gt; &gt; &lt;code&gt;nautilus&lt;/code&gt; &gt; &lt;code&gt;desktop&lt;/code&gt; and tick on any option which you want to view on desktop.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/oQobj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oQobj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3:&lt;/strong&gt;&lt;br&gt;&#xA;Then go to, &lt;code&gt;org&lt;/code&gt; &gt; &lt;code&gt;pantheon&lt;/code&gt; &gt; &lt;code&gt;desktop&lt;/code&gt; &gt; &lt;code&gt;cerbere&lt;/code&gt; and add 'nautilus -n' entry as shown below.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;['wingpanel', 'plank', 'slingshot-launcher --silent', 'nautilus -n']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2CeP5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2CeP5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 4:&lt;/strong&gt;&lt;br&gt;&#xA;Open Terminal and type following command, &lt;code&gt;nautilus -n&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 5:&lt;/strong&gt;&lt;br&gt;&#xA;Go to dconf-tools again and go to, &lt;code&gt;org&lt;/code&gt; &gt; &lt;code&gt;gnome&lt;/code&gt; &gt; &lt;code&gt;desktop&lt;/code&gt; &gt; &lt;code&gt;background&lt;/code&gt; and tick on &lt;strong&gt;show-desktop-icons box&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yw3tv.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yw3tv.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is any problem, simply logout and login again.&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="572" LastEditDate="2017-02-27T09:48:15.967" LastActivityDate="2017-02-27T09:48:15.967" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3859" PostTypeId="1" CreationDate="2016-01-05T19:27:56.320" Score="2" ViewCount="328" Body="&lt;p&gt;I want to have the following layout. Secondary monitor on top of the primary (laptop) monitor. However the top panel moves to the upper one (secondary-monitor).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix the position to the primary monitor (or any given one) the same way as it is possible with the plank?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/23sMS.png&quot; alt=&quot;Layout&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="330" LastActivityDate="2016-01-05T19:27:56.320" Title="Top panel in vertical dual-monitor layout" Tags="|wingpanel|" AnswerCount="0" CommentCount="1" ClosedDate="2016-01-07T23:53:17.860" ContentLicense="CC BY-SA 3.0" />
  <row Id="3862" PostTypeId="1" CreationDate="2016-01-06T00:38:40.307" Score="1" ViewCount="335" Body="&lt;p&gt;I installed the elementary-transparent-theme and used the tweak tools to change the GTK+ and metacity themes to transparent. The transparent theme works fine in GTK+ windows, but in metacity windows (such as google chrome, libre office, etc) it doesn`t work (white bar instead of transparent bar). Anyone has an idea of how can I solve this? Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pTw1g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pTw1g.png&quot; alt=&quot;White bar appears instead of transparent bar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3674" LastActivityDate="2016-01-06T01:04:12.693" Title="Elementary transparent theme not working properly" Tags="|release-freya|settings|themes|window-management|" AnswerCount="1" CommentCount="0" ClosedDate="2017-10-08T17:21:29.020" ContentLicense="CC BY-SA 3.0" />
  <row Id="3863" PostTypeId="1" AcceptedAnswerId="3866" CreationDate="2016-01-06T00:49:22.810" Score="0" ViewCount="115" Body="&lt;p&gt;I bought a new (high end) laptop recently and elementary OS runs like a dream on it.  The bad news is that I had to update the kernel to 4.3* to get everything working properly and I subsequently removed 3.19.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now software updates is trying to push the original kernel and I want to know how this can be avoided.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eOsvN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eOsvN.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="59" LastActivityDate="2016-01-06T02:41:29.403" Title="How do I avoid Kernel 3.19 updates?" Tags="|kernel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3864" PostTypeId="2" ParentId="3862" CreationDate="2016-01-06T01:04:12.693" Score="2" Body="&lt;p&gt;Metacity does not support the alpha (transparency) channel.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-06T01:04:12.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3865" PostTypeId="1" CreationDate="2016-01-06T01:37:57.763" Score="8" ViewCount="5989" Body="&lt;p&gt;As the title said, is there a way to tweak this feature in elementary OS? Menu bar of every application should show on the top bar like OS X.&lt;/p&gt;&#xA;" OwnerUserId="3496" LastEditorUserId="34" LastEditDate="2016-01-11T12:42:49.293" LastActivityDate="2022-02-06T06:54:01.590" Title="Top menu bar like OS X or Ubuntu?" Tags="|wingpanel|menu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3866" PostTypeId="2" ParentId="3863" CreationDate="2016-01-06T02:41:29.403" Score="2" Body="&lt;p&gt;Install synaptic&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open synaptic and search for &lt;code&gt;linux-image&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now select the one which you don't want to update. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now click on &lt;code&gt;package&lt;/code&gt; in menu bar --&gt; click on &lt;code&gt;lock version&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/GMfDE.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to repeat the same for all the entries in &lt;code&gt;software-updater&lt;/code&gt; related to &lt;code&gt;3.19&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use alternative methods mentioned at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1807/how-to-prevent-updating-of-a-specific-package&quot;&gt;How to prevent updating of a specific package?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will stop updating the desired kernel, at the same time, when you run &lt;code&gt;software-updater&lt;/code&gt;, you will get &lt;em&gt;partial updates&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-06T02:41:29.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3867" PostTypeId="2" ParentId="3785" CreationDate="2016-01-06T05:02:59.027" Score="1" Body="&lt;p&gt;This seems to be a little bug - actually appearing in freya. I can't reproduce this in Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I decided to file a bug report on &lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1531386&quot; rel=&quot;nofollow&quot;&gt;launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Please may everybody reading this and having observed the same behaviour&#xA;confirm this bug to increase its importance and get it fixed quickly! Thank you.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this, click the link above, log into your launchpad account and click on:&lt;br&gt;&#xA;&lt;em&gt;This bug affects X people. Does this bug affect you?&lt;/em&gt; - Select &quot;Yes&quot;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-06T05:02:59.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3868" PostTypeId="1" CreationDate="2016-01-06T08:59:58.123" Score="2" ViewCount="88" Body="&lt;p&gt;When I select &quot;Switch Off...&quot; from the drop down that appears when clicking on the power icon in the top right corner, the &quot;Are you sure you want to shut down?&quot; interface comes up. It has three buttons, &lt;code&gt;Restart&lt;/code&gt;, &lt;code&gt;Cancel&lt;/code&gt;, and &lt;code&gt;Shut Down&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Shut Down&lt;/code&gt; button is highlighted in red, but it doesn't have any focus. By which I mean that if I press the Enter key when these options are on screen, nothing happens. I necessarily have to use the mouse to click on the &lt;code&gt;Shut Down&lt;/code&gt; button in order to shut down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to just be able to access these three buttons by pressing tab to move between them, and enter to press them. Is that possible?&lt;/p&gt;&#xA;" OwnerUserId="2827" LastActivityDate="2016-11-02T17:23:04.053" Title="No focus on shutdown buttons" Tags="|shutdown|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3870" PostTypeId="2" ParentId="3591" CreationDate="2016-01-06T14:46:57.480" Score="2" Body="&lt;p&gt;The problem is that shortcut works on key press than key release. You are using &lt;code&gt;Ctrl + Shift&lt;/code&gt; to language change. The linked post also have option &lt;code&gt;Shift + Alt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;Shift_L', '&amp;lt;Alt&amp;gt;Shift_R', '&amp;lt;Shift&amp;gt;Alt_L', '&amp;lt;Shift&amp;gt;Alt_R']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use it and you can avoid conflict.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-06T14:46:57.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3872" PostTypeId="1" AcceptedAnswerId="3873" CreationDate="2016-01-07T02:25:10.080" Score="3" ViewCount="2280" Body="&lt;p&gt;I am trying to install Win10 64-bit in VM using VBox. Here is error message when I try to start the VM for the first time, after allocating space and other settings:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Kernel driver not installed (rc=1908)&lt;/p&gt;&#xA;&lt;p&gt;The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;'/etc/init.d/vboxdrv setup'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So I executed the command and then it gave me a &amp;gt; rather than the usual me@me~$ , what does this mean? I should have been asked for root if it was needed to make this file change, correct?&lt;/p&gt;&#xA;" OwnerDisplayName="user3637" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-01-07T03:20:37.993" Title="VBox Kernel driver not installed (rc=1908)" Tags="|microsoft-windows|virtualbox|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3873" PostTypeId="2" ParentId="3872" CreationDate="2016-01-07T02:47:08.557" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;it gave me a &gt; rather than the usual me@me~$&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You have included the single quote. You get &lt;code&gt;&amp;gt;&lt;/code&gt; for every &lt;code&gt;ENTER&lt;/code&gt; until you enter other single quote.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press &lt;code&gt;Ctrl + D&lt;/code&gt; to see actual error message. (Simply you can terminate with &lt;code&gt;Ctrl + C&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;what does this mean?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Off-topic in this site. But let me tell you in single line. It allows scripting in multiple lines in terminal. I use in &lt;code&gt;awk&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To solve your issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dkms&#xA;sudo /etc/init.d/vboxdrv setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The above two commands solved the issue for me. If not working, follow the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential linux-headers-`uname -r` dkms&#xA;sudo apt-get install --reinstall virtualbox-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally try,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i&#xA;/etc/init.d/vboxdrv setup&#xA;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Restart to the system is &lt;em&gt;may&lt;/em&gt; required &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-07T03:20:37.993" LastActivityDate="2016-01-07T03:20:37.993" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3876" PostTypeId="1" AcceptedAnswerId="3877" CreationDate="2016-01-07T05:56:50.297" Score="1" ViewCount="42" Body="&lt;p&gt;What do I do now? Windows 7 and 10 are installed and I can't install on the free space shown as unusable below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bLUH6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bLUH6.jpg&quot; alt=&quot;Here is a picture of how the installation process looks like&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3683" LastEditorUserId="2708" LastEditDate="2016-01-07T06:24:41.663" LastActivityDate="2016-01-07T06:32:04.063" Title="Triple booting, what do I do now?" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3877" PostTypeId="2" ParentId="3876" CreationDate="2016-01-07T06:32:04.063" Score="0" Body="&lt;p&gt;From screenshot it is clear you have &lt;strong&gt;four primary partitions&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Refer &lt;a href=&quot;https://en.wikipedia.org/wiki/Disk_partitioning&quot; rel=&quot;nofollow&quot;&gt;Disk partitioning&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The total data storage space of a PC HDD can contain &lt;strong&gt;at most four primary partitions&lt;/strong&gt;, or alternatively &lt;strong&gt;three primary partitions and an extended partition&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To rectify this, you would need to remove a partition, replace it with an Extended Partition, then use logical partitions within that Extended Partition to get more than 4 partitions onto the drive.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-07T06:32:04.063" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3879" PostTypeId="2" ParentId="2124" CreationDate="2016-01-07T14:43:43.990" Score="1" Body="&lt;p&gt;The following solution works fine for me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;First open &lt;code&gt;Language &amp;amp; region&lt;/code&gt; and add required language and &lt;strong&gt;layout&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then it asks to select the following options:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Keyboard model: Press &lt;kbd&gt;Enter&lt;/kbd&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Country of origin for the keyboard: Select  &lt;strong&gt;French&lt;/strong&gt; and press &lt;kbd&gt;Enter&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/pRVEi.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Keyboard layout: Select &lt;strong&gt;French - French (dvorak)&lt;/strong&gt; and press &lt;kbd&gt;Enter&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/dhvyl.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;From now press &lt;kbd&gt; Enter&lt;/kbd&gt; and continue for remaining options till end. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now &lt;strong&gt;reboot&lt;/strong&gt; the system. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-07T14:43:43.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3880" PostTypeId="1" CreationDate="2016-01-07T14:49:20.297" Score="1" ViewCount="18" Body="&lt;p&gt;I'm using Freya 0.3.2. Is there any built in shortcut to duplicate current tab in terminal?&lt;/p&gt;&#xA;" OwnerUserId="3645" LastActivityDate="2016-01-07T14:49:20.297" Title="Duplicate terminal tab with shortcut" Tags="|release-freya|pantheon-terminal|" AnswerCount="0" CommentCount="2" ClosedDate="2016-01-07T16:01:28.120" ContentLicense="CC BY-SA 3.0" />
  <row Id="3881" PostTypeId="1" CreationDate="2016-01-07T15:17:36.943" Score="1" ViewCount="725" Body="&lt;p&gt;monitor: ViewSonic VX2460h&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GPU: Nvidia GT650M&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NVIDIA Driver Version: 355.11&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;xrandr&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 3409 x 1080, maximum 16384 x 16384&#xA;VGA-0 disconnected (normal left inverted right x axis y axis)&#xA;LVDS-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 345mm x 194mm&#xA;  1920x1080      59.9*+&#xA;HDMI-0 connected 1024x768+2385+203 (normal left inverted right x axis y axis) 0mm x 0mm&#xA;  1024x768       60.0*+&#xA; 1360x768       60.0     59.8  &#xA; 1152x864       60.0  &#xA; 800x600        72.2     60.3     56.2  &#xA; 680x384        60.0     59.8  &#xA; 640x480        59.9  &#xA; 512x384        60.0  &#xA; 400x300        72.2  &#xA; 320x240        60.1  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ cvt 1920 1080&#xA;-# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz&#xA;Modeline &quot;1920x1080_60.00&quot;  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ xrandr --newmode 1920x1080 173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync&#xA; X Error of failed request:  BadName (named color or font does not exist)&#xA; Major opcode of failed request:  140 (RANDR)&#xA; Minor opcode of failed request:  16 (RRCreateMode)&#xA; Serial number of failed request:  35&#xA; Current serial number in output stream:  35&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="703" LastEditorUserId="2708" LastEditDate="2016-01-08T09:33:10.880" LastActivityDate="2016-01-08T09:33:10.880" Title="I can't set the screen resolution which is through HDMI to 1920X1080 for my laptop" Tags="|resolution|nvidia|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3886" PostTypeId="2" ParentId="3881" CreationDate="2016-01-08T09:05:16.877" Score="1" Body="&lt;p&gt;Seems to me that your &lt;code&gt;xrandr --newmode&lt;/code&gt; syntax is incomplete (without the enclosing quotes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you should check &lt;a href=&quot;https://askubuntu.com/a/377944/114623&quot;&gt;this answer&lt;/a&gt; to make sure you're following the steps correctly, and you're giving xrandr the parameters it needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, remember that in order to make xrandr modes permanent, you should create a script to add them at boot time.&lt;/p&gt;&#xA;" OwnerUserId="3571" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-08T09:05:16.877" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="3887" PostTypeId="1" CreationDate="2016-01-08T10:39:08.217" Score="2" ViewCount="645" Body="&lt;p&gt;I am having some problems installing Virtualbox on my Elementary Freya. Due to some hardware, I needed to install Linux Kernel 4.4. However, I can't seem to install Virtualbox properly. (I was using rc3 previously, just updated to rc7)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;4.4.0-040400rc7-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I downloaded and tried both version from the &lt;a href=&quot;https://www.virtualbox.org/wiki/Linux_Downloads&quot; rel=&quot;nofollow&quot;&gt;website&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;virtualbox-5.0_5.0.12-104815-Ubuntu-trusty_amd64.deb&#xA;virtualbox-5.0_5.0.12-104815-Ubuntu-wily_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Both of it fails.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo /etc/init.d/vboxdrv setup&#xA;Stopping VirtualBox kernel modules ...done.&#xA;Uninstalling old VirtualBox DKMS kernel modules ...done.&#xA;Trying to register the VirtualBox kernel modules using DKMSERROR (dkms apport): kernel package linux-headers-4.4.0-040400rc7-generic is not supported&#xA;Error! Bad return status for module build on kernel: 4.4.0-040400rc7-gen onsult /var/lib/dkms/vboxhost/5.0.12/build/make.log for more information....failed!&#xA;(Failed, trying without DKMS)&#xA;Recompiling VirtualBox kernel modules ...failed!&#xA;(Look at /var/log/vbox-install.log to find out what went wrong)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any ideas how to fix this? Many thanks in advance. &lt;/p&gt;&#xA;" OwnerUserId="2435" LastActivityDate="2016-08-29T13:23:49.370" Title="Trouble installing Virtualbox on Freya with kernel 4.4.0" Tags="|software-installation|kernel|virtualbox|" AnswerCount="2" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="3888" PostTypeId="1" CreationDate="2016-01-08T11:25:10.077" Score="3" ViewCount="1282" Body="&lt;p&gt;I am currently trying make my terminal look more like the OSX terminal. Having installed the Menlo and Monaco fonts according to &lt;a href=&quot;https://askubuntu.com/questions/384551/mac-os-x-terminal-clone-for-ubuntu&quot;&gt;this&lt;/a&gt; description, I look in the dialog where the fonts are chosen and see that all monospace fonts look the same.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Is this a bug? &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Also:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there some way to turn on font-smoothing of the terminal font? Is font-smoothing supported in Freya?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="342" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-20T02:19:25.590" Title="Font smoothing in Freya" Tags="|fonts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3891" PostTypeId="2" ParentId="3815" CreationDate="2016-01-08T16:13:23.367" Score="0" Body="&lt;p&gt;sorry for taking so long to get back.  My email was filtering out these..  Anyway, I was able to get around it by installing CodeTyphon.  Which installs from source code, but provides a handy script to do it with.  With Lazarus, it would complain about not being able to resolve a dependency.&lt;/p&gt;&#xA;" OwnerUserId="3702" LastActivityDate="2016-01-08T16:13:23.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3892" PostTypeId="1" CreationDate="2016-01-08T22:28:08.360" Score="5" ViewCount="4027" Body="&lt;p&gt;Just got my new laptop (a Dell Precision 5510, i7/16GB/1TB SSD/4k) and after upgrading Win7 to Win10 and shrinking the 1TB disk to create an empty 700GB partition, I booted elementary 0.3.2 (64bit) from a USB created with unetbootin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far so good; when choosing &quot;Try without installing&quot; I arrive at the desktop where I can start the installer. The first problem was that no partitions showed up at all in the &quot;Installation type&quot; screen. This was resolved by &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;umount -l -r -f /dev/sda1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After restarting ubiquity, only the 32GB USB disk shows up in &quot;Installation type&quot;. What could be the reason for not detecting the empty 700GB partition on the SSD?&lt;/p&gt;&#xA;" OwnerUserId="2881" LastEditorUserId="2881" LastEditDate="2016-01-09T11:50:13.443" LastActivityDate="2017-04-18T13:38:07.627" Title="Installer doesn't see my SSD" Tags="|system-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3893" PostTypeId="1" CreationDate="2016-01-09T02:39:24.073" Score="5" ViewCount="265" Body="&lt;p&gt;I've recently installed elementary os (0.3.2) on all my computers and I must congratulate the development team for finally getting most of the UI right. Perhaps even better than my experience with Mac OS X (the highest compliment I can think of). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, there is a graphics problem with my macbook (early-2008). Although the os is performing spectacularly on this laptop, I seem to get graphical artifacts when changing between workspaces, or getting notifications. The artefacts appear as if the frames are shattering. Upon turning off notifications and animations, the problem is less frequent. I suspect that this is a case of obsolete integrated graphics (Intel GMA X3100), but I wanted to be sure, because the system is running fast and there is no lag in graphics as such. I'm unable to capture the shattering in a screenshot.  For the following command: &lt;code&gt;sudo lshw -c video&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;      *-display:0             &#xA;   description: VGA compatible controller&#xA;   product: Mobile GM965/GL960 Integrated Graphics Controller (primary)&#xA;   vendor: Intel Corporation&#xA;   physical id: 2&#xA;   bus info: pci@0000:00:02.0&#xA;   version: 03&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: msi pm vga_controller bus_master cap_list rom&#xA;   configuration: driver=i915 latency=0&#xA;   resources: irq:28 memory:d0100000-d01fffff memory:c0000000-cfffffff ioport:6110(size=8)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The other problem I'm facing is regarding shut down and suspend. Sometimes, the laptop does not recover from suspend. Sometimes during shutdown, the laptop gets stuck at the elementary os logo. I'm forced to hard restart the system in both cases. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any known cause/solution for the problem?&lt;/p&gt;&#xA;" OwnerUserId="3705" LastActivityDate="2016-09-20T06:51:30.683" Title="Graphics Shattering and power problems on Macbook" Tags="|suspend|macbook|shutdown|graphics|user-interface|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3894" PostTypeId="2" ParentId="3892" CreationDate="2016-01-09T11:50:52.137" Score="6" Body="&lt;p&gt;SOLVED: This issue was due to having the SATA mode set to RAID in BIOS. It was resolved by first following &lt;a href=&quot;https://superuser.com/questions/471102/change-from-ide-to-ahci-after-installing-windows-8/471108#471108&quot;&gt;this post&lt;/a&gt;, then switching SATA mode to AHCI in BIOS and booting to Safe Mode in Windows which seems to install the AHCI driver needed to start Windows in AHCI mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, I was able to again restart from the elementary USB, choose &quot;Try without installing&quot; and starting the installer from the desktop. When arriving at the &quot;Installation type&quot; screen I was able to see the SSD, hooray! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, after finishing the installer and rebooting it booted straight into Windows, bypassing GRUB - but that's a topic for another thread.&lt;/p&gt;&#xA;" OwnerUserId="2881" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2016-01-09T11:50:52.137" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3896" PostTypeId="2" ParentId="288" CreationDate="2016-01-09T16:16:42.483" Score="1" Body="&lt;p&gt;Had exactly same issue on Elementary OS Freya. This worked for me: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-applet&#xA;sudo apt-get install indicator-application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Originally found on &lt;a href=&quot;https://plus.google.com/105328164957068530844/posts/PoQrNHjujQo&quot; rel=&quot;nofollow&quot;&gt;google+ forum&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3712" LastActivityDate="2016-01-09T16:16:42.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3899" PostTypeId="1" AcceptedAnswerId="3906" CreationDate="2016-01-09T20:52:25.057" Score="2" ViewCount="1520" Body="&lt;p&gt;I'm getting the following errors:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Package libgl1-mesa-dri:i386 needs to be installed&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Package libgl1-mesa-glx:i386 needs to be installed&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Package libc6:i386 needs to be installed&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;You are missing the following 32-bit libraries, and Steam may not run:&#xA;  libGL.so.1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="3162" LastActivityDate="2021-08-31T19:01:09.380" Title="How To Install Steam?" Tags="|release-freya|steam|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3901" PostTypeId="1" AcceptedAnswerId="3902" CreationDate="2016-01-09T22:31:14.617" Score="2" ViewCount="264" Body="&lt;p&gt;I have moved from MacOS to elementary OS. One thing I miss is the ability to search within directories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to do so, I don't seem to be finding anything when searching the web. The only thing I have found is &lt;a href=&quot;https://elementaryos.stackexchange.com/a/186/3116&quot;&gt;this answer&lt;/a&gt;, but I would like to stick with Slingshot if possible?&lt;/p&gt;&#xA;" OwnerUserId="3116" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-11T12:43:09.567" Title="Is it possible to search directories in slingshot?" Tags="|pantheon-files|slingshot|search|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3902" PostTypeId="2" ParentId="3901" CreationDate="2016-01-09T23:59:43.397" Score="3" Body="&lt;p&gt;No Slingshot does not search files or folders. It searches apps, actions, and settings&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-09T23:59:43.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3904" PostTypeId="2" ParentId="3899" CreationDate="2016-01-10T01:54:54.840" Score="-1" Body="&lt;p&gt;Download and install the latest drivers from NVIDIA. During the NVIDIA driver installation it asks if you want to install the 32bit libraries. Select yes.&lt;/p&gt;&#xA;" OwnerUserId="2416" LastActivityDate="2016-01-10T01:54:54.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3905" PostTypeId="2" ParentId="2234" CreationDate="2016-01-10T02:09:17.887" Score="0" Body="&lt;p&gt;I believe I solved this using a live cd to chroot into the target system, then installing grub-pc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions on how to chroot can be found here: &lt;a href=&quot;http://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu-live-cd&quot; rel=&quot;nofollow&quot;&gt;http://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu-live-cd&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before you run the grub-install command, run sudo apt-get install grub-pc&lt;/p&gt;&#xA;" OwnerUserId="2416" LastActivityDate="2016-01-10T02:09:17.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3906" PostTypeId="2" ParentId="3899" CreationDate="2016-01-10T03:11:47.843" Score="5" Body="&lt;p&gt;The workaround is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libc6:i386 libgl1-mesa-dri-lts-vivid:i386 libgl1-mesa-glx-lts-vivid:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you need to configure a new foreign architecture to install &lt;code&gt;steam&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, &lt;code&gt;sudo dpkg --print-foreign-architectures&lt;/code&gt; #now this should return &lt;code&gt;i386&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now continue above steps exactly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure &lt;code&gt;trusty-updates&lt;/code&gt; is enabled in Software &amp;amp; Updates&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/eHvKR.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="2708" LastEditDate="2016-01-10T15:19:22.137" LastActivityDate="2016-01-10T15:19:22.137" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="3907" PostTypeId="1" AcceptedAnswerId="3909" CreationDate="2016-01-10T06:58:49.850" Score="3" ViewCount="399" Body="&lt;p&gt;I wanted to ask if it was possible to have the shutdown dialog box also display timer for 60 seconds after which it shuts down automatically, without adding a ppa. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am aware of doing it in the terminal (&lt;code&gt;sudo shutdown -P 1&lt;/code&gt;) but just prefer to be lazy, late at night, and press the shutdown button with the screen staying on for 60 seconds while it gives me enough light to walk to the bed.&lt;/p&gt;&#xA;" OwnerUserId="3719" LastEditorUserId="3757" LastEditDate="2016-04-25T02:02:41.043" LastActivityDate="2016-04-25T02:02:41.043" Title="Have a shutdown timer like OS X?" Tags="|shutdown|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3908" PostTypeId="2" ParentId="3907" CreationDate="2016-01-10T08:57:27.583" Score="1" Body="&lt;p&gt;I mean, you could just add a &lt;code&gt;sleep 60 &amp;amp;&amp;amp;&lt;/code&gt; before your &lt;code&gt;shutdown -P 1&lt;/code&gt;, turn that into a shell script, I guess. You would have no visible timer but it should give you 60 seconds before shutting down your pc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW working with a bright displays as the only light source, late at night, up until 60 seconds before literally going to bed, is seriously messing with your sleep cycle, pal ;)&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-01-10T08:57:27.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3909" PostTypeId="2" ParentId="3907" CreationDate="2016-01-10T09:38:04.373" Score="1" Body="&lt;p&gt;Use &lt;a href=&quot;http://gshutdown.tuxfamily.org/en/index.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;gshutdown&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install from software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now open &lt;code&gt;gshutdown&lt;/code&gt; and adjust settings as per your need. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To adjust delay, select &lt;code&gt;After a delay&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/x9dQH.png&quot; alt=&quot;img&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can enable notification for &lt;code&gt;gshutdown&lt;/code&gt; in Edit --&gt; preferences --&gt; Misc&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can use &lt;a href=&quot;https://launchpad.net/complexshutdown&quot; rel=&quot;nofollow noreferrer&quot;&gt;complexshutdown&lt;/a&gt; and &lt;a href=&quot;https://launchpad.net/easyshutdown&quot; rel=&quot;nofollow noreferrer&quot;&gt;easyshutdown&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download &lt;a href=&quot;https://launchpad.net/easyshutdown/trunk/0.6/+download/easyshutdown_0.6_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;.deb&lt;/a&gt; for easyshutdown and install it via software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;: (thanks to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3719/codingbear&quot;&gt;codingbear&lt;/a&gt; )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://bugs.launchpad.net/easyshutdown/+bug/1285020&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt;, if  easy shutdown is notworking open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install consolekit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-01-11T08:38:54.587" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3914" PostTypeId="1" CreationDate="2016-01-10T19:36:39.553" Score="2" ViewCount="7794" Body="&lt;p&gt;So, after having resolved the issues with the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3892/installer-doesnt-see-my-ssd&quot;&gt;installer not being able to find the target disk&lt;/a&gt;, I was able to install Freya 0.3.2 and I am now able to start it by entering the BIOS menu where I can choose to Legacy boot. This takes me to the GRUB menu, so the boot process is currently a 2 step procedure. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason why I have to use the BIOS as a boot manager is probably because I installed GRUB to the wrong location. As it is now it works OK, but it's of course a bit cumbersome and not very pretty, so I'd like to set up a boot loader. &quot;While at it&quot;, I thought I could just as well try to set up something that looks good. Preferably it should be something that matches the sleek and polished look of elementary itself, so a black &amp;amp; white text-only GRUB menu is something that I'd like to avoid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd love to have something that looks like the &lt;a href=&quot;http://bigrza.deviantart.com/art/El-Castillo-BURG-Theme-187228213&quot; rel=&quot;nofollow&quot;&gt;&quot;El Castillo&quot; BURG theme&lt;/a&gt;, but as far as I know, BURG doesn't support (U)EFI (correct me if I'm wrong)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, what options are there? &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;GRUB with grub-customizer?&lt;/li&gt;&#xA;&lt;li&gt;rEFInd? &lt;/li&gt;&#xA;&lt;li&gt;Clover?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2881" LastEditorUserId="3757" LastEditDate="2016-05-05T13:57:42.047" LastActivityDate="2019-06-23T13:03:49.007" Title="Options for a graphical EFI boot loader?" Tags="|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3915" PostTypeId="1" CreationDate="2016-01-10T20:05:02.980" Score="-2" ViewCount="238" Body="&lt;p&gt;Thank you for the beautiful work you guys have done with this OS, I'm having a problem, I followed all the steps on you site to try to install the USB I made when downloading the OS, I chose the 64 bit version and I tried to install it on a Acer AO1-431-C8G8 computer with Windows 10 pre installed, I tried to install a single boot overwriting Windows as I complete dislike Windows and I bought this computer with the sole purpose of turning into a Linux machine.&#xA;Can you please if possible send me a step by step instructions of the installation if possible, or could it be possible that when I made the USB I messed up something.&lt;/p&gt;&#xA;" OwnerUserId="3715" LastEditorUserId="3757" LastEditDate="2016-05-06T05:24:41.340" LastActivityDate="2016-05-06T05:24:41.340" Title="Install elementary OS" Tags="|system-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3916" PostTypeId="2" ParentId="3915" CreationDate="2016-01-10T22:53:38.757" Score="1" Body="&lt;p&gt;The setup is very simple and easy&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, here's how to install it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the first screen you'll get&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2MxLm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2MxLm.png&quot; alt=&quot;eOS&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Click &quot;Install elementary&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&quot;Continue&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Check &quot;Erase disk and install elementary&quot; then press &quot;Install now&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-&quot;Continue&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Choose your location then &quot;Continue&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Choose your keyboard layout then press &quot;Continue&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Set your username and password then &quot;Continue&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-It gonna take few minutes installing and you'll be ready to go&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Have a nice day&lt;/p&gt;&#xA;" OwnerUserId="3646" LastActivityDate="2016-01-10T22:53:38.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3917" PostTypeId="1" CreationDate="2016-01-10T23:12:08.337" Score="10" ViewCount="25512" Body="&lt;p&gt;I have been having some issues installing Nvidia graphics drivers, I have tried many different things including things I've seen in other stack questions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Installing manually using the .run from their website, following a &lt;a href=&quot;https://gist.github.com/jansanchez/ce5b0ca1c5e538f4b266&quot; rel=&quot;noreferrer&quot;&gt;gist&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Using the ppa's &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1592/installing-nvidia-drivers-blank-screen&quot;&gt;found here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Things that I have ended up doing:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Blacklisted nouveau in &lt;code&gt;/etc/modprobe.d/blacklist-nouveau.conf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Ended up removing nouveau per suggestion found somewhere else to no change&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Where I'm at:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Black screen &lt;/li&gt;&#xA;&lt;li&gt;Occasionally stuck at a white 'e' (elementary icon)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/var/log/lightdm/lightdm.log&lt;/code&gt; final lines are giving&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[+0.00s] DEBUG: Seat: Failed to find session configuration default&#xA;[+0.00s] DEBUG: Seat: Failed to create greeter session&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be helpful, thanks!&lt;/p&gt;&#xA;" OwnerUserId="3724" LastActivityDate="2018-12-02T16:37:39.967" Title="Installing Nvidia drivers" Tags="|graphics|nvidia|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3918" PostTypeId="1" CreationDate="2016-01-11T00:05:54.900" Score="0" ViewCount="128" Body="&lt;p&gt;I am installing elementary OS on my computer as a primary operating system. Whenever I choose my USB as the boot device nothing happens. Can someone please walk me through doing this?&lt;/p&gt;&#xA;" OwnerUserId="3726" LastEditorUserId="3757" LastEditDate="2016-05-05T07:08:30.663" LastActivityDate="2016-05-05T07:08:30.663" Title="Booting elemetary OS with USB" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3919" PostTypeId="2" ParentId="3320" CreationDate="2016-01-11T03:24:29.623" Score="1" Body="&lt;p&gt;There are many issues with this model, but you may complete the install process by using the live option.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a bootable usb drive using Unetbootin.&lt;/li&gt;&#xA;&lt;li&gt;Boot into the usb flash drive.&lt;/li&gt;&#xA;&lt;li&gt;Select the live option: &quot;Try Elementary OS without installing&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select the install icon from the dock and complete the install process.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3722" LastActivityDate="2016-01-11T03:24:29.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3920" PostTypeId="2" ParentId="3918" CreationDate="2016-01-11T06:37:38.170" Score="1" Body="&lt;p&gt;If what you want is to boot into the usb device in order to install elementary, then the steps are located &lt;a href=&quot;https://elementary.io/es/docs/installation#download-elementary-os&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.  Now, if you have trouble booting to your usb device, I would reccomend:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Check in the BIOS of your computer if USB is selected as the &lt;strong&gt;FIRST&lt;/strong&gt; boot device.&lt;/li&gt;&#xA;&lt;li&gt;Reinstall the OS to the USB device with &lt;code&gt;UNetbootin&lt;/code&gt; following the steps listed in the link.&lt;/li&gt;&#xA;&lt;li&gt;Finally, give it another go.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3571" LastActivityDate="2016-01-11T06:37:38.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3921" PostTypeId="1" CreationDate="2016-01-11T11:57:10.607" Score="1" ViewCount="200" Body="&lt;p&gt;I've just added an elementary OS install on my already dual-booting Macbook. It uses rEFIt for switching OS from OSX to Win7 or Linux. But when I switch to elementary OS (via rEFIt), i'm then greeted with a GRUB screen asking once more to select which system I want to boot from. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I suppress GRUB (which is installed on the main Linux partition) and rely solely on rEFIt for switching OS ?&lt;/p&gt;&#xA;" OwnerUserId="3731" LastEditorUserId="34" LastEditDate="2016-01-11T13:42:09.790" LastActivityDate="2016-09-07T22:09:48.690" Title="How to erase GRUB when I already use another bootloader?" Tags="|grub|macbook|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3922" PostTypeId="2" ParentId="3921" CreationDate="2016-01-11T13:09:06.467" Score="1" Body="&lt;p&gt;Before literally removing GRUB from your elementaryOS, consider settings its timeout to 0 (so you won't see it, but it's still there). To do it, open a terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find the lines that begin with &lt;code&gt;GRUB_HIDDEN&lt;/code&gt; and put a &lt;code&gt;#&lt;/code&gt; in front of each one. Also do it with the &lt;code&gt;GRUB_DEFAULT&lt;/code&gt; line. Now change the &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; line so it looks like &lt;code&gt;GRUB_TIMEOUT=0&lt;/code&gt;. Hit Ctrl+O and then ENTER to save the file and hit Ctrl+X to exit. Run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You have been warned. Now I'll teach you how to actually remove GRUB from your partition's boot section. In a terminal, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=/dev/sdx of=/home/user/mbr.img bs=446 count=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To make a backup of GRUB in your home folder, then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=/dev/zero of=/dev/sdx bs=446 count=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To remove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to recover GRUB, just run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=/home/user/mbr.img of=/dev/sdx bs=446 count=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(!!!) Don't forget to replace &lt;code&gt;sdx&lt;/code&gt; with your partition name and &lt;code&gt;user&lt;/code&gt; with yout username!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope it helped!&lt;/p&gt;&#xA;" OwnerUserId="3732" LastActivityDate="2016-01-11T13:09:06.467" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3923" PostTypeId="1" CreationDate="2016-01-11T15:55:03.393" Score="1" ViewCount="162" Body="&lt;p&gt;I was hoping someone could explain how to automatically mount CDs and DVDs on inserting them into the drive instead of having to open files and clicking on the drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using Freya 0.3.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am also interested to see if anyone has a good solution for doing the same with USB devices (pen drives, phones, external HD).  I currently use usbmount for this and works well for pen drives but not my phone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2016-01-11T15:55:03.393" Title="How to automatically mount CDs and DVDs on insertion?" Tags="|hardware|mount|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3924" PostTypeId="1" CreationDate="2016-01-11T16:01:10.843" Score="3" ViewCount="622" Body="&lt;p&gt;I have installed a CSR 4.0 bluetooth dongle with drivers on my PC and paired it with a Bluetooth speaker. It works OK but I have to manually start the A2DP (sink) service for the speaker to work. Is there any way to get this to start automatically when the PC boots?&#xA;Ian&lt;/p&gt;&#xA;" OwnerUserId="3734" LastActivityDate="2023-12-20T11:04:05.663" Title="BT A2DP not connecting automatically" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3925" PostTypeId="1" CreationDate="2016-01-11T16:56:06.723" Score="1" ViewCount="501" Body="&lt;p&gt;I just installed Freya on an old Pavillion Slimline with a Pentium E2140 Dual Core 1,6 Ghz, 2GB of RAM and a Radeon HD2350.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it's not the ultimate state of art PC, but I thought it was enough for Elementary OS and Pantheon DE, which I found amazingly fast on just slightly better machines. But in the end I found myself with an incredibly slow OS, not usable at all. System animations take forever to end, I disabled animations with elementary-tweaks but they are still taking the same time. Scrolling on the browser is sluggish and watching a YouTube video is impossible since it hardly displays a couple of frames a second. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems to me a graphics card issue, but the system doesn't show me any proprietary drivers available to install, and (in Info) is perfectly able to tell me what card I'm on, so doesn't seem to me like I'm using generic drivers or something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The processor supports 64-bit, so I installed the 64-bit version, may this be a problem? &lt;/p&gt;&#xA;" OwnerUserId="3736" LastActivityDate="2016-01-11T16:56:06.723" Title="System is unusably sluggish, help me find out why" Tags="|graphic-drivers|display|graphics|" AnswerCount="0" CommentCount="7" ClosedDate="2019-02-20T16:01:18.587" ContentLicense="CC BY-SA 3.0" />
  <row Id="3926" PostTypeId="1" AcceptedAnswerId="3927" CreationDate="2016-01-11T19:03:28.990" Score="1" ViewCount="360" Body="&lt;p&gt;I am running Luna (Elementary OS 0.2.1) on Ubuntu &quot;Precise&quot; 12.0.4. I want to compile &lt;a href=&quot;https://www.geany.org/Download/Releases&quot; rel=&quot;nofollow&quot;&gt;Geany 1.26&lt;/a&gt; from the source, but when I ./configure, I get this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;checking for GTK... no&#xA;configure: error: Package requirements (gtk+-2.0 &amp;gt;= 2.24 glib-2.0 &amp;gt;= 2.28 gio-2.0 &amp;gt;= 2.28 gmodule-no-export-2.0) were not met:&#xA;&#xA;No package 'gtk+-2.0' found&#xA;&#xA;Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.&#xA;&#xA;Alternatively, you may set the environment variables GTK_CFLAGS and GTK_LIBS to avoid the need to call pkg-config.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, I have gtk 3.0 installed, re:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l libgtk* | grep -e '^i' | grep -e 'libgtk-*[0-9]'&#xA;&#xA;libgtk-3-0&#xA;libgtk-3-bin&#xA;libgtk-3-common&#xA;libgtk-3-dev&#xA;libgtk2-perl&#xA;libgtk2.0-0&#xA;libgtk2.0-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkg-config --modversion gtk+-2.0&#xA;&#xA;Package gtk+-2.0 was not found in the pkg-config search path.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can someone please explain the following?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) How did this happen? Shouldn't ubuntu update the pkg-config path for me when I installed libgtk-3-0?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Do I really need to manually update the pkg-config search path or is there something else that should be done that will correct this problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I find that there are typically n+1 ways to accomplish something in linux, but sometimes the most obvious solution is not the best one.&lt;/p&gt;&#xA;" OwnerUserId="3737" LastEditorUserId="75" LastEditDate="2016-01-11T19:57:12.233" LastActivityDate="2016-01-11T19:59:50.947" Title="Compile Geany 1.26 on elementary OS Luna" Tags="|gtk|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3927" PostTypeId="2" ParentId="3926" CreationDate="2016-01-11T19:59:50.947" Score="2" Body="&lt;p&gt;GTK+ has two major branches, 2.0 and 3.0. They are incompatible and Geany is a GTK+ 2.0 application. You'll need the development headers for GTK+ 2.0. These are included in a package called &lt;code&gt;libgtk2.0-dev&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-01-11T19:59:50.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3929" PostTypeId="1" AcceptedAnswerId="3940" CreationDate="2016-01-11T21:38:12.623" Score="1" ViewCount="341" Body="&lt;p&gt;I changed my wallpaper, but the default wallpaper still shows up before logging into my profile and after logging out of my profile. It's also being used as the background for my conky.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone could help me with the conky problem as well, I would greatly appreciate it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/v5Rcc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v5Rcc.png&quot; alt=&quot;Here&amp;#39;s an image of what&amp;#39;s happening with the conky&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my .conkyrc file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    #====================================&#xA;#   Conky Settings&#xA;#====================================&#xA;background yes&#xA;update_interval 1&#xA;double_buffer yes&#xA;no_buffers yes&#xA;&#xA;&#xA;#====================================&#xA;#   Window Specifications&#xA;#====================================&#xA;gap_x 0&#xA;gap_y 0&#xA;alignment middle_middle&#xA;&#xA;minimum_size 600 380&#xA;maximum_width 600&#xA;&#xA;own_window yes&#xA;own_window_type normal&#xA;own_window_transparent yes&#xA;own_window_hints undecorate,sticky,skip_taskbar,skip_pager,below&#xA;&#xA;#own_window_argb_visual yes&#xA;#own_window_argb_value 0&#xA;&#xA;#border_margin 0&#xA;#border_inner_margin 0&#xA;#border_outer_margin 0&#xA;&#xA;&#xA;#====================================&#xA;#   Graphics Settings&#xA;#====================================&#xA;draw_shades no&#xA;draw_outline no&#xA;draw_borders no&#xA;draw_graph_borders no&#xA;&#xA;&#xA;#====================================&#xA;#   Text Settings&#xA;#====================================&#xA;use_xft yes&#xA;xftalpha 0&#xA;xftfont sans serif:size=10&#xA;override_utf8_locale yes&#xA;imlib_cache_size 0&#xA;&#xA;&#xA;#====================================&#xA;#   Color Scheme&#xA;#====================================&#xA;default_color FFFFFF&#xA;&#xA;color0 FFFFFF   # clock&#xA;color1 FFFFFF   # date&#xA;color2 FFFFFF   # current temperature&#xA;color3 FFFFFF   # high tempratures&#xA;color4 FFFFFF   # low tempratures&#xA;color5 FFFFFF   # days&#xA;&#xA;&#xA;#====================================&#xA;#   Icon Sources&#xA;#====================================&#xA;template0 ~/.conky-vision-icons/FFFFFF  # today&#xA;template1 ~/.conky-vision-icons/FFFFFF  # +1day&#xA;template2 ~/.conky-vision-icons/FFFFFF  # +2days&#xA;template3 ~/.conky-vision-icons/FFFFFF  # +3days&#xA;template4 ~/.conky-vision-icons/FFFFFF  # +4days&#xA;&#xA;&#xA;#====================================&#xA;#   WOEID (Where On Earth ID)&#xA;#====================================&#xA;template7 22664084&#xA;&#xA;&#xA;#====================================&#xA;#   Temp Unit (c = Celsius, f = Fahrenheit)&#xA;#====================================&#xA;template8 c&#xA;&#xA;&#xA;#====================================&#xA;#   Language (e.g. es_ES.UTF-8)&#xA;#====================================&#xA;template9  # leave empty for locale&#xA;&#xA;&#xA;###################################################&#xA;###################################################&#xA;&#xA;&#xA;TEXT&#xA;#----------------------------------------&#xA;#   CURL&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${execi 300 curl -s &quot;http://weather.yahooapis.com/forecastrss?w=${template7}&amp;amp;u=${template8}&quot; -o ~/.cache/weather.xml}\&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Clock&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:weight=Light:size=96}${color0}\&#xA;${alignc}${time %H:%M}\&#xA;${font}${color}&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Date&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:weight=Light:size=28}${color1}\&#xA;${voffset 30}\&#xA;${alignc}${execi 300 LANG=${template9} LC_TIME=${template9} date +&quot;%A, %B %d&quot;}\&#xA;${font}${color}&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Current Temperature&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:size=18}${color2}\&#xA;${voffset 36}\&#xA;${goto 60}${execi 300 grep &quot;yweather:condition&quot; ~/.cache/weather.xml | grep -o &quot;temp=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot;}°\&#xA;${font}${color}\&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   High Temperatures&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:size=12}${color3}\&#xA;${goto 164}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==2'}°\&#xA;\&#xA;${goto 272}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==3'}°\&#xA;\&#xA;${goto 378}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==4'}°\&#xA;\&#xA;${goto 484}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==5'}°\&#xA;${font}${color}\&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Low Temparatures&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:size=12}${color4}\&#xA;${voffset 52}\&#xA;${goto 218}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==2'}°\&#xA;${goto 324}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==3'}°\&#xA;${goto 430}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==4'}°\&#xA;${goto 536}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==5'}°\&#xA;${font}${color}&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Day Names&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${font Poiret One:size=14}${color5}\&#xA;${voffset 20}\&#xA;${goto 76}${execi 300 LANG=${template9} LC_TIME=${template9} date +%^a}\&#xA;${goto 182}${execi 300 LANG=${template9} LC_TIME=${template9} date -d +1day +%^a}\&#xA;${goto 288}${execi 300 LANG=${template9} LC_TIME=${template9} date -d +2days +%^a}\&#xA;${goto 394}${execi 300 LANG=${template9} LC_TIME=${template9} date -d +3days +%^a}\&#xA;${goto 500}${execi 300 LANG=${template9} LC_TIME=${template9} date -d +4days +%^a}\&#xA;${font}${color}&#xA;\&#xA;\&#xA;#----------------------------------------&#xA;#   Weather Icons&#xA;#----------------------------------------&#xA;\&#xA;\&#xA;${execi 300 cp -f ${template0}/$(grep &quot;yweather:condition&quot; ~/.cache/weather.xml | grep -o &quot;code=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot;).png ~/.cache/weather-1.png}${image ~/.cache/weather-1.png -p 72,268 -s 32x32}\&#xA;\&#xA;${execi 300 cp -f ${template1}/$(grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;code=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==2').png ~/.cache/weather-2.png}${image ~/.cache/weather-2.png -p 178,268 -s 32x32}\&#xA;\&#xA;${execi 300 cp -f ${template2}/$(grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;code=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==3').png ~/.cache/weather-3.png}${image ~/.cache/weather-3.png -p 284,268 -s 32x32}\&#xA;\&#xA;${execi 300 cp -f ${template3}/$(grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;code=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==4').png ~/.cache/weather-4.png}${image ~/.cache/weather-4.png -p 390,268 -s 32x32}\&#xA;\&#xA;${execi 300 cp -f ${template4}/$(grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;code=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==5').png ~/.cache/weather-5.png}${image ~/.cache/weather-5.png -p 496,268 -s 32x32}\&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3740" LastActivityDate="2016-01-12T23:14:34.113" Title="How do I get rid of the default wallpaper?" Tags="|wallpaper|conky|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3930" PostTypeId="1" CreationDate="2016-01-11T22:56:06.410" Score="1" ViewCount="106" Body="&lt;p&gt;I would like to know if I can install elementary on my tablet.&lt;/p&gt;&#xA;" OwnerUserId="3741" LastEditorUserId="26" LastEditDate="2016-01-12T23:11:59.993" LastActivityDate="2016-01-12T23:11:59.993" Title="Can I install elementary on a Lenovo Tab 2 A10-70?" Tags="|release-freya|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3931" PostTypeId="1" AcceptedAnswerId="3942" CreationDate="2016-01-11T23:49:02.240" Score="2" ViewCount="7198" Body="&lt;p&gt;I have a 128 GB SSD and Windows 7 is already installed. Now I want to install elementary OS on a second partition. How many space do I need at least for elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope you can help me.&#xA;Regards Niklas!&lt;/p&gt;&#xA;" OwnerUserId="3742" LastEditorUserId="75" LastEditDate="2016-01-12T10:05:36.243" LastActivityDate="2016-01-12T23:18:00.853" Title="How much space does elementary OS need in dualboot?" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="5" ClosedDate="2016-01-13T17:30:17.313" ContentLicense="CC BY-SA 3.0" />
  <row Id="3933" PostTypeId="2" ParentId="3929" CreationDate="2016-01-12T03:48:07.217" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/lightdm/pantheon-greeter.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find &lt;code&gt;#default-wallpaper=/usr/share/backgrounds/elementaryos-default&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Delete the # and change the directory?&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="26" LastEditDate="2016-01-12T23:14:34.113" LastActivityDate="2016-01-12T23:14:34.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3934" PostTypeId="1" AcceptedAnswerId="3935" CreationDate="2016-01-12T06:37:25.390" Score="3" ViewCount="2995" Body="&lt;p&gt;Anyway tried to install the latest mongodb installation using the &lt;a href=&quot;https://docs.mongodb.org/manual/tutorial/install-mongodb-on-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;ubuntu tutorial&lt;/a&gt;? I tried it before but can't seem to replicate it. I'm getting this error when doing &lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;W: GPG error: &lt;a href=&quot;http://repo.mongodb.org&quot; rel=&quot;nofollow&quot;&gt;http://repo.mongodb.org&lt;/a&gt; trusty/mongodb-org/3.2 Release: The following signatures were invalid: BADSIG D68FA50FEA312927 MongoDB 3.2 Release Signing Key &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="3733" LastActivityDate="2016-01-12T09:09:53.380" Title="Latest MongoDB installation" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3935" PostTypeId="2" ParentId="3934" CreationDate="2016-01-12T08:20:21.820" Score="1" Body="&lt;p&gt;The error message is  &lt;strong&gt;not&lt;/strong&gt; indicating that &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2984/error-signatures-couldnt-be-verified-because-the-public-key-is-not-available&quot;&gt;the public key&lt;/a&gt; is missing but rather that the signature is bad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I too  have same &lt;em&gt;warning&lt;/em&gt; message,  I have tried all solutions provided &lt;a href=&quot;https://askubuntu.com/questions/1877/what-is-the-easiest-way-to-resolve-apt-get-badsig-gpg-errors&quot;&gt;here&lt;/a&gt;, but nothing works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The possible workaround is Install from &lt;a href=&quot;https://docs.mongodb.org/manual/tutorial/install-mongodb-on-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;tarball&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I am just copy &amp;amp; pasting commands here&lt;/em&gt; from above link.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the binary files for the desired release of MongoDB.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -O https://fastdl.mongodb.org/linux/mongodb-linux-x86_64-3.2.0.tgz&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Extract the files from the downloaded archive.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tar -zxvf mongodb-linux-x86_64-3.2.0.tgz&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy the extracted archive to the target directory.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p mongodb&#xA;cp -R -n mongodb-linux-x86_64-3.2.0/ mongodb&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Don't just add keys from error messages. Only add keys you trust.&lt;/strong&gt; Because any repository with this key, would be able to install any package without warning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mongodb 3.0 has no warning messages,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 7F0CEB10&#xA;echo &quot;deb http://repo.mongodb.org/apt/ubuntu trusty/mongodb-org/3.0 multiverse&quot; | sudo tee /etc/apt/sources.list.d/mongodb-org-3.0.list&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-12T09:09:53.380" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3937" PostTypeId="1" AcceptedAnswerId="3941" CreationDate="2016-01-12T09:32:26.493" Score="5" ViewCount="772" Body="&lt;p&gt;I work a lot in terminal, and am not a fan of having new tabs and new windows opening my previous working directory. I would like to change pantheon-terminal to open my home directory each time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the following keys in /usr/share/glib-2.0/schemas/org.pantheon.terminal.gschema.xml and changed default to equal false, and yet I am still getting the same behavior. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    &amp;lt;key name=&quot;follow-last-tab&quot; type=&quot;b&quot;&amp;gt;&#xA;    &amp;lt;default&amp;gt;false&amp;lt;/default&amp;gt;&#xA;    &amp;lt;summary&amp;gt;Open last active tab path on new tab.&amp;lt;/summary&amp;gt;&#xA;    &amp;lt;description&amp;gt;Defines whether a new tab should have the path of the last active tab.&amp;lt;/description&amp;gt;&#xA;    &amp;lt;/key&amp;gt;&#xA;    &amp;lt;key name=&quot;remember-tabs&quot; type=&quot;b&quot;&amp;gt;&#xA;    &amp;lt;default&amp;gt;false&amp;lt;/default&amp;gt;&#xA;    &amp;lt;summary&amp;gt;Defines whether the terminal should remember tabs.&amp;lt;/summary&amp;gt;&#xA;    &amp;lt;description&amp;gt;Defines whether the terminal should remember the last open tabs.&amp;lt;/description&amp;gt;&#xA;    &amp;lt;/key&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="3739" LastActivityDate="2016-01-12T10:04:13.820" Title="How to disable last working directory in pantheon-terminal?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3938" PostTypeId="2" ParentId="3937" CreationDate="2016-01-12T09:37:09.940" Score="3" Body="&lt;p&gt;A work-around: add &lt;code&gt;cd ~&lt;/code&gt; to your bashrc file.&lt;/p&gt;&#xA;" OwnerUserId="342" LastActivityDate="2016-01-12T09:37:09.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3939" PostTypeId="1" CreationDate="2016-01-12T09:44:21.630" Score="0" ViewCount="883" Body="&lt;p&gt;Recently i installed freya.&#xA;my laptop (Lenovo G50-80) is not charging after 60%. Then i installed windows But in windows working fine without any power management s/w. &#xA;Then i again install freya (fresh install) But the problem still same.&lt;/p&gt;&#xA;" OwnerUserId="3675" LastActivityDate="2016-01-13T22:13:21.017" Title="My laptop not charging after 60%" Tags="|system|battery|" AnswerCount="1" CommentCount="0" ClosedDate="2016-01-22T10:03:01.343" ContentLicense="CC BY-SA 3.0" />
  <row Id="3940" PostTypeId="2" ParentId="3929" CreationDate="2016-01-12T09:57:32.100" Score="2" Body="&lt;p&gt;Greeter is supposed to show the currently selected user's wallpaper. If you are using a custom wallpaper and it does not work, it is most likely caused by a permission issue; The wallpaper file has to be available for everyone to read. Check the file's permissions with &lt;code&gt;ls -lisa /path/to/file&lt;/code&gt;. If the permissions do not show up like &lt;code&gt;rw-r--r--&lt;/code&gt;, you'll need to add them (for example via &lt;code&gt;chmod o+r /path/to/file&lt;/code&gt;). You can find more information regarding permissions &lt;a href=&quot;https://unix.stackexchange.com/questions/183994/understanding-unix-permissions-and-their-attributes&quot;&gt;in this StackExchange answer&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As the other answer indicates, you can edit the file &lt;code&gt;/etc/lightdm/pantheon-greeter.conf&lt;/code&gt; with administrative privileges and change the following line to choose a different default wallpaper. You will need to un-comment the line (remove the &lt;code&gt;#&lt;/code&gt; in front) as well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; #default-wallpaper=/usr/share/backgrounds/elementaryos-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="75" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-01-12T10:21:51.897" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3941" PostTypeId="2" ParentId="3937" CreationDate="2016-01-12T10:04:13.820" Score="6" Body="&lt;p&gt;You must actually change those keys in gsettings not in the gschema. So use for example the terminal with:&#xA;&lt;code&gt;gsettings set org.pantheon.terminal.settings follow-last-tab false&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-01-12T10:04:13.820" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3942" PostTypeId="2" ParentId="3931" CreationDate="2016-01-12T10:09:21.303" Score="5" Body="&lt;p&gt;The &lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;official installation guide&lt;/a&gt; &lt;strong&gt;recommends&lt;/strong&gt; at least &lt;strong&gt;15 GB free space&lt;/strong&gt; and the installer &lt;strong&gt;requires 6.4 GB&lt;/strong&gt;. The base operating system itself won't take much more space (in fact it most likely takes less space than 15GB), but if you want to install more applications and save some data (e.g. movies or music) on the partition, you should go with a bit more, depending on your use-case.&lt;/p&gt;&#xA;" OwnerUserId="75" LastEditorUserId="26" LastEditDate="2016-01-12T23:18:00.853" LastActivityDate="2016-01-12T23:18:00.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3943" PostTypeId="2" ParentId="3201" CreationDate="2016-01-12T10:55:35.873" Score="1" Body="&lt;p&gt;So, after hours of googling I ended up here: &lt;a href=&quot;https://sites.google.com/site/easylinuxtipsproject/reserve-7#TOC-Realtek-RTL8188EU-chipset-0bda:8179-&quot; rel=&quot;nofollow&quot;&gt;https://sites.google.com/site/easylinuxtipsproject/reserve-7#TOC-Realtek-RTL8188EU-chipset-0bda:8179-&lt;/a&gt;&#xA;There was a section 6 which provided a link to an updated? driver and some instructions that worked perfectly.  I now have wireless Yay.  :-)&lt;/p&gt;&#xA;" OwnerUserId="3224" LastActivityDate="2016-01-12T10:55:35.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3945" PostTypeId="1" CreationDate="2016-01-12T15:09:47.697" Score="2" ViewCount="514" Body="&lt;p&gt;I've been trying to change the grub (menu) background colour. No matter what I try the black grub menu will remain.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've changed the plymouth theme elementary.grub file. Here are the contents of that file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;if background_color 44,0,30,0; then&#xA;  clear&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is copied from my Ubuntu 15.10 box where it works fine and any changes I do in the rgb value take effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried a 3 variable rgb option as well (44,0,30) to no avail. Adding a space between the last value and the semi-colon does not make any difference.&lt;/p&gt;&#xA;" OwnerUserId="3745" LastActivityDate="2016-08-02T17:41:33.127" Title="changing grub background colour in Freya" Tags="|grub|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3946" PostTypeId="1" CreationDate="2016-01-12T18:59:07.313" Score="1" ViewCount="1231" Body="&lt;p&gt;How well will Elementary OS run on a 5-yr old Acer Aspire one 523h-2527 netbook?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Windows 7 runs very sluggishly. Would Elementary run faster?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shortly after I bought it, I was advised by a knowledgeable person not to install Windows XP because drivers would not be available? Would be any any driver issues with Elementary?&lt;/p&gt;&#xA;" OwnerUserId="3749" LastEditorUserId="-1" LastEditDate="2016-01-18T14:25:13.243" LastActivityDate="2016-01-18T14:25:13.243" Title="How well will Elementary OS run on a 5-yr old Acer netbook?" Tags="|performance|" AnswerCount="1" CommentCount="2" ClosedDate="2016-01-12T23:12:45.433" ContentLicense="CC BY-SA 3.0" />
  <row Id="3948" PostTypeId="2" ParentId="3946" CreationDate="2016-01-12T19:14:45.193" Score="1" Body="&lt;p&gt;The &lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;System Recommendations&lt;/a&gt; are: &#xA;    Intel i3 or comparable dual-core 64-bit processor&#xA;    1 GB of system memory (RAM)&#xA;    15 GB of disk space&#xA;    Internet access&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said: I run freya on a Dell Laptop from 2003. While it is slow, it's still faster than anything but LXDE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a way you can &lt;a href=&quot;https://www.youtube.com/watch?v=YnDkGQm7irE&quot; rel=&quot;nofollow&quot;&gt;turn off animations&lt;/a&gt; in pantheon, which will speed up performance on older systems. That video is for Luna, but I am pretty sure it will work in Freya.&lt;/p&gt;&#xA;" OwnerUserId="3739" LastEditorUserId="3739" LastEditDate="2016-01-12T19:20:47.427" LastActivityDate="2016-01-12T19:20:47.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3949" PostTypeId="1" AcceptedAnswerId="3951" CreationDate="2016-01-12T22:16:46.547" Score="5" ViewCount="25229" Body="&lt;p&gt;Is it possible somehow to install &lt;code&gt;phpstorm&lt;/code&gt; and &lt;code&gt;webstorm&lt;/code&gt; and having them in the application list?&lt;/p&gt;&#xA;" OwnerUserId="3744" LastActivityDate="2017-11-10T16:16:06.540" Title="Installing phpstorm / webstorm as Application" Tags="|applications|software-installation|" AnswerCount="4" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3950" PostTypeId="2" ParentId="3930" CreationDate="2016-01-12T23:11:18.033" Score="2" Body="&lt;p&gt;As your tablet uses an ARM processor instead of a 32 or 64 bit processor as is typical on laptops and desktops, elementary OS is not available for it at this time.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-01-12T23:11:18.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3951" PostTypeId="2" ParentId="3949" CreationDate="2016-01-12T23:59:48.710" Score="2" Body="&lt;p&gt;&lt;strong&gt;Step 1:&lt;/strong&gt;&#xA;Go to &lt;a href=&quot;https://www.jetbrains.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.jetbrains.com/&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2:&lt;/strong&gt;&#xA;Download the tar.gz of the IDE you want. For eg. PhpStorm&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3:&lt;/strong&gt;&#xA;Extract the PhpStorm.tar.gz file to your preferred location. You can use the right-click option or from the command line use: &lt;code&gt;$ tar -zxvf PhpStorm.tar.gz&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 4:&lt;/strong&gt;&#xA;Now go to &lt;code&gt;&amp;lt;folder location&amp;gt;/PhpStorm/bin&lt;/code&gt; and run the &lt;code&gt;phpstorm.sh&lt;/code&gt; file. This will create an icon in the Application list as well as run the program.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Later on, when you want to start the application you can do so from the application list&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="12361" LastEditDate="2017-11-10T16:16:06.540" LastActivityDate="2017-11-10T16:16:06.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3952" PostTypeId="2" ParentId="3945" CreationDate="2016-01-13T02:19:45.097" Score="2" Body="&lt;p&gt;Use &lt;a href=&quot;https://launchpad.net/grub-customizer&quot; rel=&quot;nofollow noreferrer&quot;&gt;grub-customizer&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download &lt;a href=&quot;https://launchpad.net/grub-customizer/4.0/4.0.6/+download/grub-customizer_4.0.6.tar.gz&quot; rel=&quot;nofollow noreferrer&quot;&gt;latest version&lt;/a&gt; and install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or This PPA contains the latest release of Grub Customizer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer&#xA;sudo apt-get update&#xA;sudo apt-get install grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;grub-customizer&lt;/code&gt; --&gt; Appearence settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tpp0V.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: After customizing  don't forget to &lt;strong&gt;save&lt;/strong&gt; changes.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-13T02:19:45.097" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3953" PostTypeId="1" CreationDate="2016-01-13T06:57:37.183" Score="2" ViewCount="655" Body="&lt;p&gt;I'm trying to install on a 2006 MacBook 1,1. It's Core Duo, therefore, I have to use the 32Bits version. Also, I had to use the ISO 2 USB Efi booter for mac (&lt;a href=&quot;https://astrofloyd.wordpress.com/2014/01/14/boot-linux-from-usb-flash-drive-on-macbook/&quot; rel=&quot;nofollow&quot;&gt;https://astrofloyd.wordpress.com/2014/01/14/boot-linux-from-usb-flash-drive-on-macbook/&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, it boots and I can try the OS, I even installed a system monitor, but when I click on the installation icon it doesn't start. A round circle appears for about 1 minute, but that's it. Only once the installer opened, and after I have to select my location it went into the black screen with the blinking mouse pointer, as it has been described in some threads.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do in order to get the installer working and being able to install the OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks and cheers &lt;/p&gt;&#xA;" OwnerUserId="3751" LastEditorUserId="3757" LastEditDate="2016-05-05T13:46:42.077" LastActivityDate="2016-05-05T13:46:42.077" Title="Installer doesn't start" Tags="|system-installation|macbook|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3954" PostTypeId="2" ParentId="3953" CreationDate="2016-01-13T11:20:50.557" Score="3" Body="&lt;p&gt;If you're installing Elementary OS on a Macbook that already has an OSX partition, i'd recommend installing rEFIt as bootloader for switching between OSX and Elementary OS. It worked like a charm and allowed me to install a triple system boot (OSX 10.6.8, WIN7, ElemOS) on an early 2008 Macbook (Core 2 Duo). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default, rEFIt is installed on your OSX partition. If you're installing on a blank drive, it's a bit more tricky but you'll find some leads here : &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=1150617&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuforums.org/showthread.php?t=1150617&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're ok with keeping a small OSX partition, use the Apple disk utility to format your disk with 3 partitions under GUID (OSX + 1 MS-DOS for Linux + 1 MSDOS for Swap). Install OSX first, then rEFIt. Put the Elementary OS install disk in, reboot and choose the Elementary CD to boot on. You can now install Linux on the partitions you had reserved. Of course, youll' need the install tool to reformat the linux one to ext4 or btrfs, and allocate the third one as swap.&lt;/p&gt;&#xA;" OwnerUserId="3731" LastActivityDate="2016-01-13T11:20:50.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3955" PostTypeId="2" ParentId="3949" CreationDate="2016-01-13T12:17:23.673" Score="5" Body="&lt;p&gt;&lt;strong&gt;Note: - Please note that PhpStorm and WebStorm are not FREE, so this is a 30-day trial, if you don't have activation key.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System requirements for both &lt;a href=&quot;https://www.jetbrains.com/phpstorm/download/#section=linux-version&quot; rel=&quot;noreferrer&quot;&gt;PhpStorm&lt;/a&gt; and &lt;a href=&quot;https://www.jetbrains.com/webstorm/download/#section=linux-version&quot; rel=&quot;noreferrer&quot;&gt;WebStorm&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;1 GB RAM minimum, 2 GB RAM recommended&lt;/li&gt;&#xA;&lt;li&gt;Oracle JRE 1.6+ or OpenJDK 1.7+&lt;/li&gt;&#xA;&lt;li&gt;1024x768 minimum screen resolution&lt;/li&gt;&#xA;&lt;li&gt;GNOME or KDE desktop (works in elementary also)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Install dependencies: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://www.jetbrains.com/webstorm/help/system-requirements-and-installation.html#d213132e221&quot; rel=&quot;noreferrer&quot;&gt;official site&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Oracle (Sun) JDK 1.6+ or OpenJDK 1.7 or higher (OpenJDK 1.8 is recommended). Using OpenJDK is not recommended because this may result in visual and performance problems. You can use OpenJDK on your own risk if Oracle JDK causes more severe issues in your system.&#xA;  Installation instructions:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Open terminal and run the folowing commands to install java (If you don't have):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt-get update&#xA;sudo apt-get install oracle-java8-installer&#xA;sudo apt-get install oracle-java8-set-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install Phpstorm:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Download &lt;a href=&quot;https://www.jetbrains.com/phpstorm/download/download-thanks.html?platform=linux&quot; rel=&quot;noreferrer&quot;&gt;PhpStorm-10.0.3.tar.gz&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unpack the PhpStorm-10.0.3.tar.gz file using the following command:&lt;br&gt;&#xA;&lt;code&gt;tar xfz PhpStorm-10.0.3.tar.gz&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;PhpStorm.sh&lt;/code&gt; from the &lt;code&gt;bin&lt;/code&gt; subdirectory&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To do the above steps open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget https://download.jetbrains.com/webide/PhpStorm-10.0.3.tar.gz&#xA;tar xvfz PhpStorm-10.0.3.tar.gz&#xA;cd PhpStorm-143.1770/bin&#xA;./phpstorm.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To Install Webstorm:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download &lt;a href=&quot;https://www.jetbrains.com/webstorm/download/download-thanks.html?platform=linux&quot; rel=&quot;noreferrer&quot;&gt;WebStorm-11.0.3.tar.gz&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unpack the WebStorm-11.0.3.tar.gz file using the following command:&lt;br&gt;&#xA;&lt;code&gt;tar xfz WebStorm-11.0.3.tar.gz&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run WebStorm.sh from the bin subdirectory&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To do the above steps open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget https://download.jetbrains.com/webstorm/WebStorm-11.0.3.tar.gz&#xA;tar xvfz WebStorm-11.0.3.tar.gz&#xA;cd WebStorm-*/bin&#xA;./webstorm.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To create launcher icon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While Installing phpstorm/webstorm it will ask to create Desktop Entry. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you haven't enable the option, later you can do that from &lt;em&gt;Configuration --&gt; Create Desktop Entry&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastActivityDate="2016-01-13T12:17:23.673" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3956" PostTypeId="1" AcceptedAnswerId="3957" CreationDate="2016-01-13T15:17:16.037" Score="12" ViewCount="2176" Body="&lt;p&gt;Whenever I try and open Scratch, it tries to load the files I previously had open. While I want to keep the behaviour, one of the files I opened was an SVG of several MBs. As a result, Scratch now hangs and eventually crashes every time I open it.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-11-09T08:34:17.617" Title="How can I clear currently opened files in Scratch?" Tags="|code|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3957" PostTypeId="2" ParentId="3956" CreationDate="2016-01-13T15:17:16.037" Score="14" Body="&lt;p&gt;You can view your currently open files with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.pantheon.scratch.settings opened-files&#xA;['file:///home/lewis/image.svg']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can clear your currently open files by setting the same key as  an empty list.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.scratch.settings opened-files []&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-01-13T15:17:16.037" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3958" PostTypeId="2" ParentId="3956" CreationDate="2016-01-13T16:10:23.253" Score="5" Body="&lt;p&gt;This is only an alternative,  &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3957/2708&quot;&gt;Lewis answer&lt;/a&gt; is the accurate one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To clear currently opened files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open scratch --&gt; settings --&gt; preferences --&gt; Behavior --&gt; Show Welcome Screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not able to open scratch, open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.scratch.settings show-at-start welcome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem here is because scratch stores previously opened files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you have two (may be more) possible workarounds.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;What lewis suggested, removing previously opened files, which results scratch to open welcome screen (I mean default one), but retain  &quot;last-tabs&quot; behavior. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;What I have suggested, directly changing to welcome screen (Alternative), but &quot;last-tabs&quot; behavior will change. Since OP wants to have the &quot;Show last open tabs&quot; behavior, he can change once he open scratch. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;In both the cases the previously opened files be ignored and scratch open with welcome screen&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In any case the point is opening &lt;em&gt;scratch without crashing&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-01-14T02:42:36.463" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3959" PostTypeId="1" CreationDate="2016-01-13T17:44:08.957" Score="-2" ViewCount="570" Body="&lt;p&gt;When I click on the internet icon the WIFI option is not displayed .&#xA;The wired (Ethernet) option it is listed and I can connect just fine using a wired connection but don't know what to do about connecting to WIFI.&#xA;My WIFI works just fine on other devices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would appreciate any help.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; *-network UNCLAIMED     &#xA;       description: Network controller&#xA;       product: Intel Corporation&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       version: 81&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:a1100000-a1101fff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: eth0&#xA;       version: 0a&#xA;       serial: b0:5a:da:d5:6b:c4&#xA;       size: 100Mbit/s&#xA;       capacity: 100Mbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix bus_master cap_list&#xA;   ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd &#xA; autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169&#xA;  driverversion=2.3LK-NAPI duplex=full firmware=rtl8107e-2_0.0.2&#xA;   02/26/15 ip=192.168.0.11 latency=0 link=yes multicast=yes port=MII&#xA;  speed=100Mbit/s&#xA;   resources: irq:127 ioport:3000(size=256) memory:a1004000-a1004fff&#xA; memory:a1000000-a1003fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3754" LastEditorUserId="3754" LastEditDate="2016-01-17T15:18:37.367" LastActivityDate="2016-01-17T15:18:37.367" Title="Just installed freya but dont know how to connect to WIfi" Tags="|system-installation|wifi|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3960" PostTypeId="2" ParentId="3555" CreationDate="2016-01-13T19:16:25.997" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/Webby/&quot; rel=&quot;nofollow&quot;&gt;Webby&lt;/a&gt; is my favorite application for &quot;sites as applications&quot;. However, I find that is is slow and unresponsive on my Acer C720. I also am unable to download linked files with it. That being said, websites that render with Webby, look much cleaner than Google Chrome or Firefox. I am not sure what it is - maybe the fonts, maybe the css engine, but webby's web engine is beautiful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For sites that I think I might want to navigate a lot, download stuff, or are resource intensive, I will use Google Chrome Apps. Midori is also acceptable.&lt;/p&gt;&#xA;" OwnerUserId="3739" LastActivityDate="2016-01-13T19:16:25.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3963" PostTypeId="2" ParentId="3939" CreationDate="2016-01-13T22:13:21.017" Score="0" Body="&lt;p&gt;Could it be that the battery is crystallized or being damaged.&#xA;I have seen that even Windows is not able to recognize the current state of a battery, in exchange gnu Linux recognizes when a battery is being damaged by statistics and charts showing the current state of the battery since it was installed ElementaryOS&lt;/p&gt;&#xA;" OwnerUserId="3755" LastActivityDate="2016-01-13T22:13:21.017" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3964" PostTypeId="1" CreationDate="2016-01-14T02:08:04.327" Score="2" ViewCount="203" Body="&lt;p&gt;I put bellow the output when I run the command &lt;code&gt;pantheon-files&lt;/code&gt; on shell.&#xA;Does anybody have any idea about this problem?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bnascimento@Vostro-3450:~$ pantheon-files&#xA;[_LOG_LEVEL_INFO 14:58:17.276886] Application.vala:155: Files version: 0.2.4&#xA;[_LOG_LEVEL_INFO 14:58:17.276977] Application.vala:157: Kernel version: 3.19.0-43-generic&#xA;[_LOG_LEVEL_WARN 14:58:17.281861] Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-b5TYPphJU9: Connection refused&#xA;org.gtk.vfs.MountTracker.listMountableInfo call failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gtk.vfs.Daemon was not provided by any .service files (g-dbus-error-quark, 2)&#xA;[_LOG_LEVEL_INFO 14:58:17.313567] Application.vala:85: Report any issues/bugs you might find to http://bugs.launchpad.net/pantheon-files&#xA;[_LOG_LEVEL_WARN 14:58:17.319396] [Gtk] Attempting to read the recently used resources file at `/home/bnascimento/.local/share/recently-used.xbel', but the parser failed: Falha ao abrir arquivo &quot;/home/bnascimento/.local/share/recently-used.xbel&quot;: Permission denied.&#xA;invoking IsSupported() failed for remote volume monitor with dbus name org.gtk.Private.GPhoto2VolumeMonitor:: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gtk.Private.GPhoto2VolumeMonitor was not provided by any .service files (g-dbus-error-quark, 2)&#xA;invoking IsSupported() failed for remote volume monitor with dbus name org.gtk.Private.AfcVolumeMonitor:: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gtk.Private.AfcVolumeMonitor was not provided by any .service files (g-dbus-error-quark, 2)&#xA;invoking IsSupported() failed for remote volume monitor with dbus name org.gtk.Private.MTPVolumeMonitor:: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gtk.Private.MTPVolumeMonitor was not provided by any .service files (g-dbus-error-quark, 2)&#xA;Segmentation fault (imagem do núcleo gravada)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3756" LastEditorUserId="3757" LastEditDate="2016-03-27T03:40:47.967" LastActivityDate="2016-08-24T07:02:21.617" Title="Pantheon files does not open in Freya" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="3965" PostTypeId="1" AcceptedAnswerId="4012" CreationDate="2016-01-14T02:37:25.473" Score="4" ViewCount="1655" Body="&lt;p&gt;I would like to know how to get the long Ubuntu based version in Elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;lsb_release -a -u&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: Ubuntu&#xA;Description:    Ubuntu 14.04 LTS&#xA;Release:    14.04&#xA;Codename:   trusty&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;lsb_release -a&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: elementary OS&#xA;Description:    elementary OS Freya&#xA;Release:    0.3.2&#xA;Codename:   freya&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As you can see none of the commands have the long Ubuntu version (like 14.04.3)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-05T07:06:38.577" LastActivityDate="2016-05-05T07:06:38.577" Title="elementary OS - Viewing the full Ubuntu based version" Tags="|pantheon-terminal|ubuntu|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="3968" PostTypeId="1" CreationDate="2016-01-14T06:39:20.113" Score="1" ViewCount="59" Body="&lt;p&gt;I'm having issues with the graphics not a big problem though but it needs to be fixed youtu.be/fMPKw5EkOew this video is posted on youtube by another user but this is what I got and it didn't happen always but I have it and I'm worry about I hope someone can help me to fix it.&#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="3728" LastActivityDate="2016-01-14T06:39:20.113" Title="Anyway to fix the Graphics shattering problem?" Tags="|graphic-drivers|graphics|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3969" PostTypeId="1" AcceptedAnswerId="3970" CreationDate="2016-01-14T07:12:26.947" Score="1" ViewCount="58" Body="&lt;p&gt;I am trying to add and remove action to welcome screen at run time on pressing Add and Delete buttons in Header Bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am unable to append a new action item to welcome page at runtime.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;check Code &lt;a href=&quot;http://pastebin.com/J02EJisJ&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="144" LastActivityDate="2016-01-14T08:22:51.000" Title="Granite Widgets : Unable to append a new action item to welcome page at runtime" Tags="|programming|development|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3970" PostTypeId="2" ParentId="3969" CreationDate="2016-01-14T08:22:51.000" Score="1" Body="&lt;p&gt;I can't check it currently, but this sounds like you &lt;em&gt;are&lt;/em&gt; adding the widget and it simply doesn't show. When adding a new widget to &lt;code&gt;welcomeLayout&lt;/code&gt;, running &lt;code&gt;welcomeLayout.show_all ()&lt;/code&gt; &lt;em&gt;should&lt;/em&gt; show the new widget(s). You might want to run this after adding a new item in &lt;code&gt;public void addAWelcomeButton ()&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-01-14T08:22:51.000" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3971" PostTypeId="1" CreationDate="2016-01-14T10:22:56.207" Score="5" ViewCount="107" Body="&lt;p&gt;I am struggling to find an option to delete individual emails in a conversation. The delete function purges the whole conversation but I would like to delete just one email in a 10-email conversation. Any secret keyboard shortcut or something?&lt;/p&gt;&#xA;" OwnerUserId="3760" LastEditorUserId="5565" LastEditDate="2016-10-03T07:26:49.407" LastActivityDate="2016-10-03T07:26:49.407" Title="Delete individual emails in a thread" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3972" PostTypeId="1" CreationDate="2016-01-14T11:21:59.763" Score="0" ViewCount="51" Body="&lt;p&gt;Where is the best place for ask a new app:&#xA;- propose requirement&#xA;- publish proposed mockups&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've seen bountysource is linked with launchpad, but launchpad doesn't seems the proper tool for requirement and discuss mockups...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions ?&lt;/p&gt;&#xA;" OwnerUserId="3761" LastEditorUserId="3757" LastEditDate="2016-05-06T14:21:54.887" LastActivityDate="2016-05-06T14:21:54.887" Title="Where to propose a new app for elementary OS, discuss design" Tags="|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3973" PostTypeId="2" ParentId="3972" CreationDate="2016-01-14T12:20:10.100" Score="1" Body="&lt;p&gt;There were some of such proposals over there at &lt;a href=&quot;https://plus.google.com/communities/104613975513761463450&quot; rel=&quot;nofollow&quot;&gt;Google Plus&lt;/a&gt;. Try it there. Perhaps you will find some developers. However, there is no official platform. Bountysource has an platform for elementary's own applications.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-01-14T12:20:10.100" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3975" PostTypeId="1" AcceptedAnswerId="3983" CreationDate="2016-01-14T14:54:00.707" Score="-1" ViewCount="357" Body="&lt;p&gt;I have a question. &#xA;I'm trying to install this OS on my HDD instead if my SSD, but the problem is that my HDD seems like not to show up on the list, always shows up as &quot;unknown&quot; but I've already made some partition in windows (NTFS): &lt;a href=&quot;https://lh3.googleusercontent.com/7IGGy9DK81Nwa9PFknb_jsKnJ8zfxnvvU2TCE9f_pf0ATpLLCB_5G2TFi9g0ZjmbKYpOQRMWiDC0tM0t7c1dE3qIGgIGff-Heqs4y1uVuURmoSJnT9Jw9U7oJpIGaI4wEQiQBedQC77elJW1Q01mNF-4pXv2igWqcjMVzX7EGA87S28aL-MTheVt1dkaqgKiW8-F92ZWo7rimIXRLRCGMwf6LGJbtRv1JSzM823rLwSzK2-7LrdkGqJp8l30j6YsyU0yYpmzl4hLtjVh1AO3CcyA4tqMx3ITeSnA03XQpbefMpYPoAekgg7TToqlCUvDhQiK30Oalvt43ZJ-cKiYf1-f-xvKGvsoXQ6aifzMbyQyuYSP_cNx44G6f68an9VNNZmV16oet6z_NbB4e5da2ZXINVspwndi7E1vXAFB8cYeG99HGd_HqjR7igUMhjWELd3tb7EjVBR2BSOhHebbIZ4BcIttL6vBbuarAbte4-SG-80gmJkYVf2KGdI448qnKjXAecH1OxcNh4DXHJQJSoWTdtCkbqe6uu_e3T8E2fYvTmGkG8C8ljOgJPrOTeteWAHC=w1567-h881-no&quot; rel=&quot;nofollow&quot;&gt;Picture of the menu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me what I have to do? I tried both using a USB Stick and DVD, neither of them worked for me...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-d3v_&lt;/p&gt;&#xA;" OwnerUserId="3763" LastActivityDate="2016-04-14T10:06:15.503" Title="Cannot choose HDD at installation" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3976" PostTypeId="1" CreationDate="2016-01-14T16:05:04.800" Score="1" ViewCount="150" Body="&lt;p&gt;I've been trying elementary OS, and is in fact the best Linux distribution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only problem that I can report, and I haven't seen anyone complaining about it, is that LibreOffice Word is crashing the system frequently (or just halting all processes, even &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a PHP developer using PHPStorm, and if I open LibreOffice to check some error doc, I can't do more then 2 Alt-Tabs; the first swich works fine, and the second just freases everything. &#xA;I've done some testing, if I have PHPStorm and file manager, everything is ok; if I have LibreOffice and File Manager, the same problem, that's why I'm blaming Libre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does Anyone have an idea what is going on???&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best Regards From Portugal&lt;/p&gt;&#xA;" OwnerUserId="3765" LastEditorUserId="3757" LastEditDate="2016-05-07T04:24:49.627" LastActivityDate="2016-05-07T04:24:49.627" Title="Alt-Tab when LibreOffice is open causes OS to crash" Tags="|release-freya|libreoffice|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3977" PostTypeId="1" AcceptedAnswerId="3978" CreationDate="2016-01-14T16:26:35.030" Score="1" ViewCount="592" Body="&lt;p&gt;Apologies beforehand if this is the wrong part of stackexchange to be asking this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get an error with installing Pantheon shell on Ubuntu Mini Remix. It says the following after installing Pantheon shell: update-gconf-defaults not found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure how to fix this. If more information is needed, I will need instructions on how to get it.&lt;/p&gt;&#xA;" OwnerUserId="3766" LastActivityDate="2016-01-14T19:53:45.823" Title="Problem with installing Pantheon shell on Ubuntu" Tags="|shell|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3978" PostTypeId="2" ParentId="3977" CreationDate="2016-01-14T19:53:45.823" Score="1" Body="&lt;p&gt;The package Pantheon is looking for in that error message is called &lt;code&gt;gconf-defaults-service&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, Pantheon is &lt;strong&gt;not supported&lt;/strong&gt; for Ubuntu nor is there anyone maintaining a working version of it for Ubuntu (unlike Arch Linux). If you simply added an elementary OS PPA to your Ubuntu install, it won't work (or at least not in a sane way). The PPA is &lt;em&gt;not&lt;/em&gt; working for Ubuntu as elementary OS ships additional patches in a separate PPA and Pantheon depends on packages from this repository. Nor will anyone fix Ubuntu-specific issues you might encounter.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-01-14T19:53:45.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3979" PostTypeId="1" AcceptedAnswerId="3980" CreationDate="2016-01-14T22:56:24.697" Score="1" ViewCount="575" Body="&lt;p&gt;I wonder if there's a way to add a bookmark in Pantheon Files (same as CTRL+D) using some command in terminal? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="403" LastActivityDate="2016-01-15T00:35:41.950" Title="Is there a way to create bookmark on Pantheon Files using terminal?" Tags="|pantheon-files|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3980" PostTypeId="2" ParentId="3979" CreationDate="2016-01-15T00:35:41.950" Score="6" Body="&lt;p&gt;The simplest way I can think of is to write the location that you want to bookmark to the bookmarks file, for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;file:///home/user/location Place&quot; &amp;gt;&amp;gt; ~/.config/gtk-3.0/bookmarks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course, replacing the location string &lt;code&gt;/home/user/location&lt;/code&gt; with your desired location and &lt;code&gt;Place&lt;/code&gt; with whatever you want to call the bookmark.&lt;/p&gt;&#xA;" OwnerUserId="3768" LastActivityDate="2016-01-15T00:35:41.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3982" PostTypeId="1" CreationDate="2016-01-15T04:41:11.357" Score="1" ViewCount="40" Body="&lt;p&gt;After installing Japanese as my system language, I can not access the Keyboard Setting in System Setting anymore. Clicking the icon brings me to a crash report window.&lt;/p&gt;&#xA;" OwnerUserId="817" LastActivityDate="2016-09-21T15:40:38.253" Title="Installing Japanese language as system language make me unable to access Keyboard Setting" Tags="|settings|keyboard|language|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-09T00:23:07.610" ContentLicense="CC BY-SA 3.0" />
  <row Id="3983" PostTypeId="2" ParentId="3975" CreationDate="2016-01-15T06:42:12.500" Score="1" Body="&lt;p&gt;There could be 2 problems:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You can't install elementary OS on NTFS.&#xA;(and even if you can, you shouldn't do that)&#xA;Solution: Delete the NTFS Partition and create a new ext4 partition with the installation manager.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You have to shut down Windows completly. Since Windows 8 its blocking the NTFS Partition, so it fast boot will work.&#xA;Solution: Open the command prompt and execute: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;shutdown.exe /s /t 0 /f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and restart the installation&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3769" LastEditorUserId="3757" LastEditDate="2016-04-14T10:06:15.503" LastActivityDate="2016-04-14T10:06:15.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3984" PostTypeId="1" AcceptedAnswerId="3987" CreationDate="2016-01-15T09:01:25.667" Score="2" ViewCount="1155" Body="&lt;p&gt;Elementary has been running very well on my Dell XPS 13 9343 for months, but today I decided to try to scale up the display a bit because it was a little hard to read text. I entered the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 21&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of &lt;code&gt;2.1&lt;/code&gt; (also, scaling with floats didn't work, only integers like 1, 2, 3, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that now, logging in crashes Pantheon before I can launch a terminal window, let alone enter the commands to reset scaling to 2, and kicks me back to the login screen. Cntl-alt-F1/F2/etc. does not bring up a shell like it does in Ubuntu, which would allow me to edit it without launching Pantheon. Also, going into recovery and getting a root shell won't allow me to change the setting because the system files are read-only in recovery. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I missing some easy way to bring up a shell from the login screen? How can I repair this? Also, is it possible to scale the display by %? 2 is too small and 3 is too large. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit to clarify: Pantheon launches with the huge menu bar across the top. Super+Space opens the app launcher, then the session crashes. If I don't do anything, the display shows only the wallpaper (properly scaled) and then the whole computer freezes, requiring a hard shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I can pull up TTY1 with Ctl-Fn-Alt-F1, but setting gsettings from there brings up the error: dconf-WARNING: failed to commit changes to dconf: Cannot autolaunch D-Bus without X11 $DISPLAY&lt;/p&gt;&#xA;" OwnerUserId="3657" LastEditorUserId="3657" LastEditDate="2016-01-15T13:55:13.747" LastActivityDate="2016-06-15T17:49:43.640" Title="Display Scaling Crashes Pantheon, No Way to Fix" Tags="|resolution|gnome|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3986" PostTypeId="1" CreationDate="2016-01-15T11:48:17.900" Score="1" ViewCount="176" Body="&lt;p&gt;I screwed up after an update (probably from a ppa of another distribution from which I wanted the internet browser...) so when I log in to the account, I only have the background image and the desktop files. No dock, panels, applications, etc. Tried to boot with the extra features to check packages and filesystem but it did nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hint on how to revert this? I'm currently on windows (I have dual boot). ALthough i can access personal files, I have nothing to work with. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="1170" LastActivityDate="2016-01-17T13:49:07.703" Title="After unkown update: lost all menus (dock, slingshot, upper bar, except for desktop files)" Tags="|wingpanel|plank|updates|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="3987" PostTypeId="2" ParentId="3984" CreationDate="2016-01-15T14:25:03.263" Score="2" Body="&lt;p&gt;After tons of troubleshooting, the following solved it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Log in as normal. Immediately after logging in as the affected user&#xA;bring up TTY1 with Ctl-Fn-Alt-F1 &lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter &lt;code&gt;export DISPLAY=:0.0&lt;/code&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set gsetting as usual (&lt;code&gt;gsettings set org.gnome.desktop.interface&#xA;scaling-factor 2&lt;/code&gt;) &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;I couldn't find a way out of TTY1, so I just did&#xA;&lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3657" LastActivityDate="2016-01-15T14:25:03.263" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="3988" PostTypeId="1" CreationDate="2016-01-15T17:20:07.817" Score="-1" ViewCount="718" Body="&lt;p&gt;I know, I must mount disk to install. I'm too lazy to do this by hands. Can I do this from the terminal?&lt;/p&gt;&#xA;" OwnerUserId="3774" LastEditorUserId="218" LastEditDate="2016-01-16T05:29:50.863" LastActivityDate="2016-01-17T13:34:46.817" Title="How to mount disk in terminal?" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ClosedDate="2016-01-22T09:59:57.963" ContentLicense="CC BY-SA 3.0" />
  <row Id="3989" PostTypeId="1" CreationDate="2016-01-15T17:58:39.997" Score="2" ViewCount="1377" Body="&lt;p&gt;I want to install new software but whenever I open up the software center I get an error saying something needs to be repaired and that I can't install anything until it gets fixed.It gives me a option to repair but when I allow it nothing happens just an endless message saying &quot; waiting for apt-get to exit&quot;. Any help is greatly appreciated&lt;/p&gt;&#xA;" OwnerUserId="3775" LastActivityDate="2016-05-17T18:54:19.693" Title="I am unable to to install any new software" Tags="|software-installation|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="3991" PostTypeId="2" ParentId="3989" CreationDate="2016-01-16T02:37:46.107" Score="0" Body="&lt;p&gt;From &lt;code&gt;man apt-get&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;apt-get&lt;/strong&gt; is the command-line tool for handling packages, and may be&#xA;         considered the user's &quot;back-end&quot; to other tools using the APT library.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;waiting for apt-get to exit&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You may have another instance of &lt;code&gt;apt-get&lt;/code&gt; running at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see what apt is doing by opening a terminal and typing &lt;code&gt;ps ax | grep apt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;2683 ?        SNl    0:17 /usr/bin/python3 /usr/sbin/aptd&#xA;5603 pts/1    S+     0:00 sudo apt-get update&#xA;5604 pts/1    S+     0:00 apt-get update&#xA;5607 pts/1    S+     0:00 /usr/lib/apt/methods/http&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The possible workaround is &lt;em&gt;wait for apt-get&lt;/em&gt; to exit or &lt;em&gt;restart&lt;/em&gt; your  system and make sure no other application run. No Update Manager , or terminal with &lt;code&gt;apt-get&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please &lt;strong&gt;do not try to forcefully end apt&lt;/strong&gt;. If you want to do it forcefully, you can use &lt;code&gt;sudo killall apt-get&lt;/code&gt; but &lt;strong&gt;don't&lt;/strong&gt; do that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Useful references &lt;a href=&quot;https://askubuntu.com/a/369203/439451&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://answers.launchpad.net/ubuntu/+source/software-center/+question/207896&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-16T06:35:45.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3992" PostTypeId="1" CreationDate="2016-01-16T08:20:32.480" Score="1" ViewCount="354" Body="&lt;p&gt;I just spent 2 hours installing all my programs and getting everything set up the way I wanted it. The last thing I did was install tlp... I used the command &lt;code&gt;sudo tlp start&lt;/code&gt; and my system suddenly froze up, I couldn't move the mouse or anything. So I shut it off by holding down the power button, restarted, and now it just freezes while it's booting. Is there any way I can uninstall tlp from my system without actually starting up the os? Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="3779" LastEditorUserId="3757" LastEditDate="2016-05-05T07:09:56.703" LastActivityDate="2016-05-05T07:09:56.703" Title="elementary OS Freya 0.3.2 won't boot after installing tlp" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="3995" PostTypeId="1" AcceptedAnswerId="3999" CreationDate="2016-01-16T13:40:16.913" Score="4" ViewCount="4221" Body="&lt;p&gt;I have Guitar Pro installed on my system (no easy task, but that's another matter for another time), and have a ton of &lt;code&gt;.gpx&lt;/code&gt;, &lt;code&gt;.gp5&lt;/code&gt;, and &lt;code&gt;.gp4&lt;/code&gt; files that I use with the application.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file icons currently just show up as chequered:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/jSOlr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jSOlr.png&quot; alt=&quot;Blank file types&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a decent icon that I can use, but I don't know how to change the icon for specific file suffixes. Can anybody help?&lt;/p&gt;&#xA;" OwnerUserId="120" LastEditorUserId="45" LastEditDate="2016-01-17T18:10:31.473" LastActivityDate="2016-01-18T00:25:58.017" Title="How can I change the icon for a specific file type?" Tags="|themes|icons|files|mimetype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3996" PostTypeId="2" ParentId="3953" CreationDate="2016-01-16T15:23:52.450" Score="2" Body="&lt;p&gt;I agree with @Tinkerzoid, rEFIt is the way to go. However, it is discontinued, but there has been a fork called rEFInd (which is basically the same thing). There's an easy, more recent explanation for installing Linux alongside Mac OS X here: &lt;a href=&quot;http://www.howtogeek.com/187410/how-to-install-and-dual-boot-linux-on-a-mac/&quot; rel=&quot;nofollow&quot;&gt;http://www.howtogeek.com/187410/how-to-install-and-dual-boot-linux-on-a-mac/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the Linux installer doesn't continue at all, the download or the live system on the USB drive may be corrupted. You could also try to create a live USB system using &lt;a href=&quot;http://sevenbits.github.io/Mac-Linux-USB-Loader/&quot; rel=&quot;nofollow&quot;&gt;http://sevenbits.github.io/Mac-Linux-USB-Loader/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-01-16T15:32:45.507" LastActivityDate="2016-01-16T15:32:45.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3997" PostTypeId="1" AcceptedAnswerId="4849" CreationDate="2016-01-16T16:23:11.377" Score="1" ViewCount="204" Body="&lt;p&gt;I plan on buying a new laptop and found a nice one that has the mentioned graphics card included.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Does the current kernel used by Ubuntu 14.04 LTS / elementary 0.3.2 support that card?&lt;/li&gt;&#xA;&lt;li&gt;If not, will support be included in the future?&lt;/li&gt;&#xA;&lt;li&gt;If not, will the system work properly without the graphics card?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:46:52.613" Title="Is elementary freya 0.3.2 (resp. Ubuntu 14.04 LTS) compatible with the AMD Radeon R5 M335 graphics card?" Tags="|release-freya|graphic-drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="3998" PostTypeId="1" CreationDate="2016-01-16T19:19:56.660" Score="3" ViewCount="52" Body="&lt;p&gt;when trying to open files without extensions (e.g .jpg), Photos fails to open them with the error message &quot;Photos does not support the format of &quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens even though the thumbnailer creates correct thumbnails, and clicking on the file properties shows the correct file type, which indicates to me that the MIME type of the file is being correctly recognized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, does Photos not support opening files based on MIME types? Or am I doing something wrong? Is there some setting I can change to support this? &lt;/p&gt;&#xA;" OwnerUserId="3782" LastActivityDate="2016-01-17T13:20:39.717" Title="Opening files without extensions fails in Photos" Tags="|photos|" AnswerCount="1" CommentCount="1" ClosedDate="2016-01-18T15:55:19.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="3999" PostTypeId="2" ParentId="3995" CreationDate="2016-01-16T19:50:17.727" Score="4" Body="&lt;p&gt;&lt;strong&gt;Create a New Mimetype&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We have to teach the system about GuitarPro as something called a &quot;mimetype&quot;. To do that, we need to create a mimetype package file that contains info about how to identify GuitarPro files.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a new file called &quot;guitarpro.xml&quot; at &quot;/usr/share/mime/packages&quot;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In this file we need to make some rules about how to match files to this mimetype and what to call it. Enter the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;mime-info xmlns='http://www.freedesktop.org/standards/shared-mime-info'&amp;gt;&#xA;    &amp;lt;mime-type type=&quot;application/x-guitarpro&quot;&amp;gt;&#xA;        &amp;lt;sub-class-of type=&quot;application/octet-stream&quot;/&amp;gt;&#xA;        &amp;lt;comment&amp;gt;Guitar Hero Pro&amp;lt;/comment&amp;gt;&#xA;        &amp;lt;glob pattern=&quot;*.gpx&quot;/&amp;gt;&#xA;        &amp;lt;glob pattern=&quot;*.gp4&quot;/&amp;gt;&#xA;        &amp;lt;glob pattern=&quot;*.gp5&quot;/&amp;gt;&#xA;    &amp;lt;/mime-type&amp;gt;&#xA;&amp;lt;/mime-info&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want different icons for each of these extensions you can add more &lt;code&gt;&amp;lt;mime-type&amp;gt;&lt;/code&gt; elements to this same file. Just make sure to change that string &lt;code&gt;application/x-guitarpro&lt;/code&gt; to something unique for each new mimetype. The above example matches all of these extensions to the same mimetype.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save the file and open Terminal. Now we need to update the mimetypes list from our definition:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-mime-database /usr/share/mime/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Create an Icon&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Icon names are matched to that string you created in your &lt;code&gt;&amp;lt;mime-type&amp;gt;&lt;/code&gt; element with the exception that we replace &lt;code&gt;/&lt;/code&gt; with &lt;code&gt;-&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Name your icon &quot;application-x-guitarpro&quot; or whatever else you called it.&lt;/li&gt;&#xA;&lt;li&gt;Copy this icon to the location &quot;/usr/share/icons/hicolor/SIZE/mimetypes&quot; where &quot;SIZE&quot; is the size of your icon.&lt;sup&gt;1&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;Close and reopen Files. You should now see your icon for these mimetypes. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;1&lt;/sup&gt;&lt;em&gt;The default icon view uses 64px icons. The default list view uses 32px icons. The file chooser dialog uses 16px icons. I recommend creating icons at each of these sizes to make sure they are sharp and legible. If you only have one size, use the &quot;scalable&quot; directory.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-01-18T00:25:58.017" LastActivityDate="2016-01-18T00:25:58.017" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4002" PostTypeId="2" ParentId="3959" CreationDate="2016-01-17T08:48:40.883" Score="1" Body="&lt;p&gt;I think you have to enable the closed-source wifi driver as that was the problem on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable to closed-source driver, open the software center then Edit &gt; Software Sources (in the top menu) and navigate to the Additional Drivers tab and enable your wifi driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason these drivers aren't enabled is because Ubuntu developers can't review / modify the source-code&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-17T08:48:40.883" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4003" PostTypeId="2" ParentId="1128" CreationDate="2016-01-17T10:55:07.803" Score="0" Body="&lt;p&gt;see youtube (in dutch) &lt;a href=&quot;https://www.youtube.com/watch?v=9c8vHVE_mtA&quot; rel=&quot;nofollow&quot;&gt;https://www.youtube.com/watch?v=9c8vHVE_mtA&lt;/a&gt;&#xA;go to system&#xA;then keyboard&#xA;then division&#xA;left corner under you see a +-sign, click it&#xA;then you will have a new window in witch you can choose a keyboard&#xA;after having choosed click &quot;add division&quot;&#xA;in the left column will appear the new keyboard&lt;/p&gt;&#xA;" OwnerUserId="3789" LastActivityDate="2016-01-17T10:55:07.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4006" PostTypeId="2" ParentId="3992" CreationDate="2016-01-17T12:16:00.563" Score="1" Body="&lt;p&gt;To remove software before the system boots you need to use recovery mode which can be accessed by holding down &lt;kbd&gt;SHIFT&lt;/kbd&gt; while booting and selecting recovery mode. Then open the shell or terminal (something like that) and type &lt;code&gt;sudo apt-get remove &amp;lt;package you installed tlp with&amp;gt;&lt;/code&gt; and also type &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; after that. Reboot your system and it should boot&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-24T03:28:25.747" LastActivityDate="2016-04-24T03:28:25.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4008" PostTypeId="2" ParentId="3997" CreationDate="2016-01-17T13:17:35.443" Score="0" Body="&lt;p&gt;Ubuntu / Linux supports most graphics cards. Even if it doesn't you can use your integrated Intel graphics which always works (although there isn't as good performance for very intensive 3d but if you have HD 5000 or higher it should be good enough). If you encounter any problems try enabling to closed-source driver which can be turned on by opening the software center and Edit &gt; Software Sources and click the Additional Drivers tab and enable the closed source driver&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-17T13:17:35.443" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4009" PostTypeId="2" ParentId="3998" CreationDate="2016-01-17T13:20:39.717" Score="1" Body="&lt;p&gt;The same happens on my laptop.I think this is an issue with pantheon-photos which is caused by it checking by the file extension (not mime type) and there is nothing we can do about it except creating an issue at &lt;a href=&quot;https://launchpad.net/pantheon-photos&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/pantheon-photos&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-17T13:20:39.717" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4010" PostTypeId="2" ParentId="3988" CreationDate="2016-01-17T13:34:46.817" Score="1" Body="&lt;p&gt;Remember that Google is your friend before posting to Stack Exchange&#xA;To mount a CD / DVD from the terminal type : &lt;code&gt;mount -t iso9660 /dev/scd0 /media/cdrom&lt;/code&gt;&#xA;To mount a partition from the terminal type : &lt;code&gt;mkdir ~/mypartition/&lt;/code&gt; and  &lt;code&gt;mount -t auto -v /dev/sda1 ~/mypartition&lt;/code&gt; (replace sda1 with your partition)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To mount an ISO image from the terminal type :&lt;code&gt;mkdir ~/iso&lt;/code&gt; and  &lt;code&gt;sudo mount -t iso9660 -o loop &quot;/path/to/iso.iso&quot; ~/iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also remember that a disk is a hard drive or SSD and a disc is a CD / DVD&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-17T13:34:46.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4011" PostTypeId="2" ParentId="3986" CreationDate="2016-01-17T13:49:07.703" Score="1" Body="&lt;p&gt;As mentioned at &lt;a href=&quot;https://askubuntu.com/questions/578258/i-cant-install-icecat-on-ubuntu-12-04&quot;&gt;https://askubuntu.com/questions/578258/i-cant-install-icecat-on-ubuntu-12-04&lt;/a&gt; there is a warning about this ppa that it is for older versions of ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove that ppa press CTRL + ALT + F1 while on the login screen and type your username and password to enter TTY.Type&lt;code&gt;sudo add-apt-repository --remove &quot;deb http://mirror.fsf.org/trisquel/ toutatis-updates main&quot;&lt;/code&gt; and after that type  &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After it is finished exit TTY by pressing  CTRL + ALT + F7 and reboot the system and login. Your installation should be running now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work open TTY (do you remember :) and login then type &lt;code&gt;sudo apt-get install ppa-purge&lt;/code&gt;.After that type &lt;code&gt;sudo ppa-purge &quot;deb http://mirror.fsf.org/trisquel/ toutatis-updates main&quot;&lt;/code&gt; and ffter that command is finished type &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; then press CTRL + ALT + F7 to exit TTY then reboot and login. Your ELementary OS should work now&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-17T13:49:07.703" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4012" PostTypeId="2" ParentId="3965" CreationDate="2016-01-17T14:39:06.080" Score="4" Body="&lt;p&gt;I found that running &lt;code&gt;uname -v&lt;/code&gt; outputs the long Ubuntu based version. Here's the output of it : &lt;code&gt;49~14.04.1-Ubuntu SMP Thu Dec 31 15:44:49 UTC 2015&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-17T14:39:06.080" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4013" PostTypeId="2" ParentId="761" CreationDate="2016-01-17T14:56:54.007" Score="3" Body="&lt;p&gt;You can use &lt;code&gt;uname -v&lt;/code&gt; which gives the full Ubuntu based version unlike the other answers. Output is below :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#49~14.04.1-Ubuntu SMP Thu Dec 31 15:44:49 UTC 2015&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need to only print the version (like in scripts) you can use&lt;code&gt;uname -v | cut -c 5- | cut -f1 -d&quot;-&quot;&lt;/code&gt; which prints &lt;code&gt;14.04.1&lt;/code&gt; on my laptop. Any improvements for the command that only prints the version are welcome&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-03-04T15:35:59.530" LastActivityDate="2016-03-04T15:35:59.530" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4015" PostTypeId="1" CreationDate="2016-01-17T16:47:28.127" Score="3" ViewCount="851" Body="&lt;p&gt;I just would like to know if freya 0.3.2 supports the new Intel Skylake chipsets (I'm looking into buying a new laptop that has an &lt;strong&gt;i7-6500U&lt;/strong&gt; CPU). I've read that the new Linux kernel 4.3 will support it out of the box, but I guess it'll be a long way until that one will be implemented into freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what would I do with my new  laptop? Is there a way to get the system running without having to install the latest kernel? If not, what would I have to do to get the newest kernel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-30T11:54:06.613" Title="Does freya support Intel Skylake CPUs?" Tags="|release-freya|hardware|kernel|drivers|cpu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4016" PostTypeId="2" ParentId="901" CreationDate="2016-01-17T17:17:09.810" Score="0" Body="&lt;p&gt;I have an Aspire E15 E5-573G-531D laptop (with WIndows 10) and I was originally unable to boot from CD/DVD/USB stick, but I've now solved it and here's how ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Obviously, first ensure you're using a DVD/CD/USB stick which is bootable (i.e. that you were able to boot from on a different computer).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before you can boot from DVD/CD/USB stick, you need to access the BIOS. To do this, reboot the laptop and keep pressing F2 until BIOS is displayed. In BIOS, go to the boot menu and do several things:-&#xA;1.  Put &quot;Windows boot manager&quot; low down the boot order (e.g. just before network boot).&#xA;2.  Put whatever device you want to boot from high up the boot order (e.g. position 1).&#xA;3.  Switch from “UEFI” to “Legacy” boot mode.&#xA;Now save changes and exit BIOS. When the laptop restarts, you'll get some DOS text with the GUID and MAC address and after a short wait it’ll say “exiting PXE ROM” and will then boot from the CD/DVD/USB stick .... Voila!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Now do whatever you want to from the DVD/CD/USB stick as you want). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(NB: If you're running an app to Wipe unused space on HDD - if that's why you needed to boot from DVD/CD/USB stick - ensure you don't accidentally delete the boot partition(s) which are marked “Primary Unknown”. I deleted several of these partitions by mistake and couldn't restart the computer afterwards, so don't make that mistake).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, having run your DVD/CD/USB stick app, you'll want to put the laptop back the way it was so that'll it start Windows as before. To do this, first shut down (not reboot) the laptop. Wait for the lights to go off. Now switch computer on and keep pressing F2 until BIOS is displayed. In BIOS, go to the boot menu and:-&#xA;1. Switch from “Legacy” to &quot;UEFI&quot; boot mode.&#xA;2. Disable secure boot (It won't boot with secure boot enabled).&#xA;Now save changes and exit BIOS. It will now restart and run Windows as before. Voila!&lt;/p&gt;&#xA;" OwnerUserId="3793" LastActivityDate="2016-01-17T17:17:09.810" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4018" PostTypeId="2" ParentId="4015" CreationDate="2016-01-17T19:15:48.680" Score="4" Body="&lt;p&gt;Please define &quot;supports&quot; :) I'm writing this on my new Dell Precision 5510 featuring an Intel i7-6820hq (Skylake chipset), running elementaryOS 0.3.2 (Freya). My only kernel related issue has been the lack of out-of-the-box support for the Intel Wireless chipset responsible for wifi and bluetooth, but that was solved by installing a back-ported driver after installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, getting the system running is absolutely no issue if you have a Skylake processor/chipset. Download the .iso and put in on a USB/CD and give it a spin (no need to install it to test it), and if it works, it works - and you can choose to install if so desired. Just a side note: if you already have an OS installed (like Windows 8/10), make sure to disable support for &quot;legacy mode&quot; (MBR) in the firmware a.k.a. BIOS. The risk is otherwise that the installer will install grub2 into the MBR instead of the EFI partition. I'm talking out of personal experience here :) (See &lt;a href=&quot;http://elementaryos-on-dell-5510.compio.it&quot; rel=&quot;nofollow&quot;&gt;http://elementaryos-on-dell-5510.compio.it&lt;/a&gt; for details)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this answered your question!&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2016-01-17T19:15:48.680" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4019" PostTypeId="2" ParentId="782" CreationDate="2016-01-18T02:35:27.487" Score="0" Body="&lt;p&gt;I suffered the same annoyance so a long time ago I added a 'workspace switcher' to WingPanel.  Clicking on it gives me a dropdown list of open workspaces, the I click on the one I want.  Still not ideal, and not what I want.  I often wish I could just scroll on that icon in wingpanel instead of clicking it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe someone knows the guy who wrote that switcher and could ask for mousewheel scrolling to be added to it.  I has to be easy!  But for now it was not the solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I added Docky under my wingpanel.  And to docky I added its workspace switcher, which shows how many workspaces are open all the time and lets me click on any workspace on its icon or, and this is the nice part,  scroll the mouse wheel while over the icon to cycle through any open workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also has the advantage that it works even when there is a full screen window on a workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, not a perfect solution, but the only one I have come up with that works 100% and is dead easy.  Even if you just install Docky and have nothing else on it other than the workspace switcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As mentioned, docky can live quite happily under/over (i've never worked out which it is) the wingpanel, or you could drop it on another edge of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;RossD&lt;/p&gt;&#xA;" OwnerUserId="3797" LastActivityDate="2016-01-18T02:35:27.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4020" PostTypeId="2" ParentId="1754" CreationDate="2016-01-18T05:52:01.610" Score="8" Body="&lt;p&gt;The solution given by cheekyngeeky does not work for some laptops.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternate solution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /etc/systemd/logind.conf&#xA;&#xA;find line &quot;#HandleLidSwitch=suspend&quot;&#xA;Replace line with &quot;HandleLidSwitch=ignore&quot;&#xA;&#xA;finaly, restart service:&#xA;sudo systemctl restart systemd-logind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3798" LastEditorUserId="22895" LastEditDate="2020-06-01T07:59:50.723" LastActivityDate="2020-06-01T07:59:50.723" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="4021" PostTypeId="1" CreationDate="2016-01-18T06:25:57.670" Score="3" ViewCount="1155" Body="&lt;p&gt;When I open WebStorm app from app icon in the Dock, the app icon is not merged with existing app icon, it becomes a new icon (with grey color - please see in the picture).&#xA;How can I merge these app icon?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CCZfk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CCZfk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3799" LastActivityDate="2016-01-19T03:10:37.557" Title="App icon is not merged in the dock" Tags="|plank|" AnswerCount="1" CommentCount="5" ClosedDate="2016-01-22T10:02:41.083" ContentLicense="CC BY-SA 3.0" />
  <row Id="4022" PostTypeId="2" ParentId="2396" CreationDate="2016-01-18T13:09:39.963" Score="1" Body="&lt;p&gt;To run any executable from plank you will need to create a &lt;code&gt;.desktop&lt;/code&gt; file. To create one open your preferred text editor as root and create a the file &lt;code&gt;/usr/share/applications/lsoplex.desktop&lt;/code&gt; with the content &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=Lsoplex&#xA;Comment=Anything you like&#xA;Exec=the path to the executable&#xA;Path=the folder to executable is i&#xA;Icon=Any svg icon&#xA;Terminal=false&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-01-18T15:49:49.187" LastActivityDate="2016-01-18T15:49:49.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4023" PostTypeId="2" ParentId="3000" CreationDate="2016-01-18T13:27:53.910" Score="3" Body="&lt;p&gt;You can try clearing the currently opened files in Scratch since I had this problem because I opened a big file. To clear the currently opened files list run &lt;code&gt;gsettings set org.pantheon.scratch.settings opened-files []&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-18T13:27:53.910" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4025" PostTypeId="1" CreationDate="2016-01-18T13:38:21.067" Score="1" ViewCount="62" Body="&lt;p&gt;Can I put an indicator-printer-applet in notification area? Because the printer manager not stopped the works when I try stop the print que. Excuse my english.&lt;/p&gt;&#xA;" OwnerUserId="3805" LastActivityDate="2016-01-18T13:38:21.067" Title="printer indicator on Freya" Tags="|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4026" PostTypeId="2" ParentId="3989" CreationDate="2016-01-18T15:49:26.577" Score="1" Body="&lt;p&gt;This is almost always a case on a system that hasn't finished it's previous installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Configure any partially installed software.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure --all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install any required dependencies.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-01-18T15:49:26.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4027" PostTypeId="1" CreationDate="2016-01-18T15:53:49.113" Score="1" ViewCount="586" Body="&lt;p&gt;I used this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1198/setting-up-os-x-style-multi-touch-gestures-on-elementary-os&quot;&gt;link&lt;/a&gt; to setup the OS X like gestures on my elementary OS 0.3.2 x64bits and it works quite well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sadly there's a but... If I use gesture on an opened window it will work, for example I got this entry :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;gesture type=&quot;DRAG&quot; fingers=&quot;3&quot; direction=&quot;LEFT&quot;&amp;gt;&#xA;    &amp;lt;action type=&quot;CHANGE_DESKTOP&quot;&amp;gt;PREVIOUS&amp;lt;/action&amp;gt;&#xA;&amp;lt;/gesture&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It says to slide on the &lt;code&gt;PREVIOUS&lt;/code&gt; desktop when I triple &lt;code&gt;DRAG&lt;/code&gt; on the left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is that touchegg seems to not working without any window, but still working on the top panel (didn't try with the dock)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've read some topics about it but no one fixed my issue, and others were closed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea ?&lt;/p&gt;&#xA;" OwnerUserId="3806" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-08T01:18:14.783" Title="touchegg inaction on desktop" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4029" PostTypeId="1" AcceptedAnswerId="4042" CreationDate="2016-01-18T16:25:27.023" Score="0" ViewCount="712" Body="&lt;p&gt;I would like to try to use only Elementary OS for my dayli worklow, so I want to erase disk and insall Elementary OS. But just for safety reasons: Is it possible to install Windows 7 after that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best Regards, Niklas&lt;/p&gt;&#xA;" OwnerUserId="3742" LastActivityDate="2016-01-19T17:43:47.433" Title="Install Windows 7 and erase Elementary OS" Tags="|system-installation|microsoft-windows|" AnswerCount="3" CommentCount="1" ClosedDate="2016-01-22T10:06:25.987" ContentLicense="CC BY-SA 3.0" />
  <row Id="4030" PostTypeId="2" ParentId="4029" CreationDate="2016-01-18T17:24:01.897" Score="1" Body="&lt;p&gt;Of course it is possible Niklas and that too without any trouble., but since this is very newbie question, I would advise you to look into and understand the differences that all linux based distributions have from mainstream Windows so that your expectations are set accordingly. Elementary OS does make it really easy to use though!&lt;/p&gt;&#xA;" OwnerUserId="3808" LastActivityDate="2016-01-18T17:24:01.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4031" PostTypeId="1" CreationDate="2016-01-18T20:16:08.903" Score="2" ViewCount="1250" Body="&lt;p&gt;(The hyperlinks are pictures I took)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had Windows 10 installed on my computer (which is a Lenovo Z70) and I installed elementary OS but &lt;a href=&quot;https://www.dropbox.com/s/bvz2ocegjyzpvu1/IMG_20160118_143905.jpg?dl=0&quot; rel=&quot;nofollow&quot;&gt;Grub2 is not recognizing the OS&lt;/a&gt;, actually none of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I type &lt;code&gt;exit&lt;/code&gt; then I get to the &lt;a href=&quot;https://www.dropbox.com/s/koqqgu5bjfx26i0/IMG_20160118_143932.jpg?dl=0&quot; rel=&quot;nofollow&quot;&gt;Boot Manager&lt;/a&gt; and I can find Windows but not Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the installation I created a &lt;code&gt;swap area (2GB)&lt;/code&gt; and an &lt;code&gt;Ext4 file system&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm sorry for this mess, the pictures are too big to upload.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance,&lt;br&gt;&#xA;André&lt;/p&gt;&#xA;" OwnerUserId="3810" LastEditorUserId="68" LastEditDate="2016-01-20T01:47:22.897" LastActivityDate="2016-08-18T19:45:20.447" Title="elementary OS not recognized by Grub2" Tags="|dual-boot|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4032" PostTypeId="1" CreationDate="2016-01-18T21:42:58.730" Score="1" ViewCount="2242" Body="&lt;p&gt;Trying to install Airplay!  &lt;a href=&quot;https://github.com/espes/Slave-in-the-Magic-Mirror&quot; rel=&quot;nofollow&quot;&gt;https://github.com/espes/Slave-in-the-Magic-Mirror&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Set up virtualenv using &lt;a href=&quot;http://www.dabapps.com/blog/introduction-to-pip-and-virtualenv-python/&quot; rel=&quot;nofollow&quot;&gt;http://www.dabapps.com/blog/introduction-to-pip-and-virtualenv-python/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed python-dev: &lt;code&gt;sudo apt-get install python-dev&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded and extract latest version of pypy. Installed in virtual environment: &lt;code&gt;virtualenv -p pypy-4.0.1-linux64/bin/pypy env&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;$ pypy -m pip install cryptography&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Collecting cryptography&#xA;  Using cached cryptography-1.2.1.tar.gz&#xA;Requirement already satisfied (use --upgrade to upgrade): idna&amp;gt;=2.0 in ./site-packages (from cryptography)&#xA;Requirement already satisfied (use --upgrade to upgrade): pyasn1&amp;gt;=0.1.8 in ./site-packages (from cryptography)&#xA;Requirement already satisfied (use --upgrade to upgrade): six&amp;gt;=1.4.1 in ./site-packages (from cryptography)&#xA;Requirement already satisfied (use --upgrade to upgrade): setuptools&amp;gt;=1.0 in ./site-packages (from cryptography)&#xA;Requirement already satisfied (use --upgrade to upgrade): enum34 in ./site-packages (from cryptography)&#xA;Requirement already satisfied (use --upgrade to upgrade): ipaddress in ./site-packages (from cryptography)&#xA;Building wheels for collected packages: cryptography&#xA;  Running setup.py bdist_wheel for cryptography&#xA;  Complete output from command /home/pershore/code/env/bin/pypy -c &quot;import setuptools;__file__='/tmp/pip-build-XdGlez/cryptography/setup.py';exec(compile(open(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))&quot; bdist_wheel -d /tmp/tmp0b4SnWpip-wheel-:&#xA;  running bdist_wheel&#xA;  running build&#xA;  running build_py&#xA;  creating build&#xA;  creating build/lib.linux-x86_64-2.7&#xA;  creating build/lib.linux-x86_64-2.7/cryptography&#xA;  copying src/cryptography/__about__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography&#xA;  copying src/cryptography/utils.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography&#xA;  copying src/cryptography/exceptions.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography&#xA;  copying src/cryptography/fernet.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography&#xA;  copying src/cryptography/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat&#xA;  copying src/cryptography/hazmat/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/extensions.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/general_name.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/name.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/base.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  copying src/cryptography/x509/oid.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/x509&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings&#xA;  copying src/cryptography/hazmat/bindings/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/backends&#xA;  copying src/cryptography/hazmat/backends/interfaces.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends&#xA;  copying src/cryptography/hazmat/backends/multibackend.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends&#xA;  copying src/cryptography/hazmat/backends/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/cmac.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/constant_time.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/padding.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/serialization.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/hmac.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/hashes.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/keywrap.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  copying src/cryptography/hazmat/primitives/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/commoncrypto&#xA;  copying src/cryptography/hazmat/bindings/commoncrypto/binding.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/commoncrypto&#xA;  copying src/cryptography/hazmat/bindings/commoncrypto/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/commoncrypto&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/openssl&#xA;  copying src/cryptography/hazmat/bindings/openssl/_conditional.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/openssl&#xA;  copying src/cryptography/hazmat/bindings/openssl/binding.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/openssl&#xA;  copying src/cryptography/hazmat/bindings/openssl/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/bindings/openssl&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  copying src/cryptography/hazmat/backends/commoncrypto/hmac.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  copying src/cryptography/hazmat/backends/commoncrypto/ciphers.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  copying src/cryptography/hazmat/backends/commoncrypto/hashes.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  copying src/cryptography/hazmat/backends/commoncrypto/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  copying src/cryptography/hazmat/backends/commoncrypto/backend.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/commoncrypto&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/cmac.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/utils.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/x509.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/ec.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/hmac.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/rsa.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/ciphers.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/hashes.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/dsa.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  copying src/cryptography/hazmat/backends/openssl/backend.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/backends/openssl&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/interfaces&#xA;  copying src/cryptography/hazmat/primitives/interfaces/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/interfaces&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  copying src/cryptography/hazmat/primitives/kdf/x963kdf.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  copying src/cryptography/hazmat/primitives/kdf/pbkdf2.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  copying src/cryptography/hazmat/primitives/kdf/hkdf.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  copying src/cryptography/hazmat/primitives/kdf/concatkdf.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  copying src/cryptography/hazmat/primitives/kdf/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/kdf&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/ciphers&#xA;  copying src/cryptography/hazmat/primitives/ciphers/modes.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/ciphers&#xA;  copying src/cryptography/hazmat/primitives/ciphers/algorithms.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/ciphers&#xA;  copying src/cryptography/hazmat/primitives/ciphers/base.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/ciphers&#xA;  copying src/cryptography/hazmat/primitives/ciphers/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/ciphers&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/twofactor&#xA;  copying src/cryptography/hazmat/primitives/twofactor/hotp.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/twofactor&#xA;  copying src/cryptography/hazmat/primitives/twofactor/utils.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/twofactor&#xA;  copying src/cryptography/hazmat/primitives/twofactor/totp.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/twofactor&#xA;  copying src/cryptography/hazmat/primitives/twofactor/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/twofactor&#xA;  creating build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/utils.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/ec.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/padding.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/dh.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/rsa.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/dsa.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  copying src/cryptography/hazmat/primitives/asymmetric/__init__.py -&amp;gt; build/lib.linux-x86_64-2.7/cryptography/hazmat/primitives/asymmetric&#xA;  running egg_info&#xA;  writing src/cryptography.egg-info/PKG-INFO&#xA;  writing dependency_links to src/cryptography.egg-info/dependency_links.txt&#xA;  writing entry points to src/cryptography.egg-info/entry_points.txt&#xA;  writing requirements to src/cryptography.egg-info/requires.txt&#xA;  writing top-level names to src/cryptography.egg-info/top_level.txt&#xA;  warning: manifest_maker: standard file '-c' not found&#xA;&#xA;  reading manifest file 'src/cryptography.egg-info/SOURCES.txt'&#xA;  reading manifest template 'MANIFEST.in'&#xA;  no previously-included directories found matching 'docs/_build'&#xA;  warning: no previously-included files matching '*' found under directory 'vectors'&#xA;  writing manifest file 'src/cryptography.egg-info/SOURCES.txt'&#xA;  running build_ext&#xA;  generating cffi module 'build/temp.linux-x86_64-2.7/_padding.c'&#xA;  creating build/temp.linux-x86_64-2.7&#xA;  generating cffi module 'build/temp.linux-x86_64-2.7/_constant_time.c'&#xA;  generating cffi module 'build/temp.linux-x86_64-2.7/_openssl.c'&#xA;  building '_openssl' extension&#xA;  creating build/temp.linux-x86_64-2.7/build&#xA;  creating build/temp.linux-x86_64-2.7/build/temp.linux-x86_64-2.7&#xA;  cc -O2 -fPIC -Wimplicit -I/home/pershore/code/env/include -c build/temp.linux-x86_64-2.7/_openssl.c -o build/temp.linux-x86_64-2.7/build/temp.linux-x86_64-2.7/_openssl.o&#xA;  build/temp.linux-x86_64-2.7/_openssl.c:2:20: fatal error: Python.h: No such file or directory&#xA;   #include &amp;lt;Python.h&amp;gt;&#xA;                      ^&#xA;  compilation terminated.&#xA;  error: command 'cc' failed with exit status 1&#xA;&#xA;  ----------------------------------------&#xA;  Failed building wheel for cryptography&#xA;Failed to build cryptography&#xA;Installing collected packages: cryptography&#xA;  Running setup.py install for cryptography&#xA;    Complete output from command /home/pershore/code/env/bin/pypy -c &quot;import setuptools, tokenize;__file__='/tmp/pip-build-XdGlez/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))&quot; install --record /tmp/pip-NXMx1t-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/pershore/code/env/include/site/python2.7/cryptography:&#xA;    running install&#xA;    running build&#xA;    running build_py&#xA;    running egg_info&#xA;    writing src/cryptography.egg-info/PKG-INFO&#xA;    writing dependency_links to src/cryptography.egg-info/dependency_links.txt&#xA;    writing entry points to src/cryptography.egg-info/entry_points.txt&#xA;    writing requirements to src/cryptography.egg-info/requires.txt&#xA;    writing top-level names to src/cryptography.egg-info/top_level.txt&#xA;    warning: manifest_maker: standard file '-c' not found&#xA;&#xA;    reading manifest file 'src/cryptography.egg-info/SOURCES.txt'&#xA;    reading manifest template 'MANIFEST.in'&#xA;    no previously-included directories found matching 'docs/_build'&#xA;    warning: no previously-included files matching '*' found under directory 'vectors'&#xA;    writing manifest file 'src/cryptography.egg-info/SOURCES.txt'&#xA;    running build_ext&#xA;    generating cffi module 'build/temp.linux-x86_64-2.7/_padding.c'&#xA;    already up-to-date&#xA;    generating cffi module 'build/temp.linux-x86_64-2.7/_constant_time.c'&#xA;    already up-to-date&#xA;    generating cffi module 'build/temp.linux-x86_64-2.7/_openssl.c'&#xA;    already up-to-date&#xA;    building '_openssl' extension&#xA;    cc -O2 -fPIC -Wimplicit -I/home/pershore/code/env/include -c build/temp.linux-x86_64-2.7/_openssl.c -o build/temp.linux-x86_64-2.7/build/temp.linux-x86_64-2.7/_openssl.o&#xA;    build/temp.linux-x86_64-2.7/_openssl.c:2:20: fatal error: Python.h: No such file or directory&#xA;     #include &amp;lt;Python.h&amp;gt;&#xA;                        ^&#xA;    compilation terminated.&#xA;    error: command 'cc' failed with exit status 1&#xA;&#xA;    ----------------------------------------&#xA;Command &quot;/home/pershore/code/env/bin/pypy -c &quot;import setuptools, tokenize;__file__='/tmp/pip-build-XdGlez/cryptography/setup.py';exec(compile(getattr(tokenize, 'open', open)(__file__).read().replace('\r\n', '\n'), __file__, 'exec'))&quot; install --record /tmp/pip-NXMx1t-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/pershore/code/env/include/site/python2.7/cryptography&quot; failed with error code 1 in /tmp/pip-build-XdGlez/cryptography&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3507" LastEditorUserId="1239" LastEditDate="2016-01-19T13:50:30.457" LastActivityDate="2016-01-19T14:16:16.957" Title="Python Header missing, cannot compile cryptography" Tags="|software-installation|python|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4034" PostTypeId="2" ParentId="4021" CreationDate="2016-01-19T03:10:37.557" Score="1" Body="&lt;p&gt;Finally, there is a simple way to fix this: simple change the icon file from &lt;code&gt;webide.png&lt;/code&gt; to &lt;code&gt;webide.ico&lt;/code&gt;, or using this useful app to edit the menu: &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/precise/alacarte/&quot; rel=&quot;nofollow&quot;&gt;https://apps.ubuntu.com/cat/applications/precise/alacarte/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3799" LastActivityDate="2016-01-19T03:10:37.557" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4035" PostTypeId="1" CreationDate="2016-01-19T08:48:16.477" Score="4" ViewCount="2156" Body="&lt;p&gt;I don't get any image previews in Pantheon Files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already did the chown of the .thumbnails folder as suggested in various other places, but that didn't help. The thing is: I do get previews for PDFs and Fonts. I also tried the following: I put the tumbler.rc from /etc/xdg/tumber into ~/.config/tumbler and set PDF disabled to true, with the effect that there were in fact no PDF thumbnails generated anymore. So somehow tumbler does work, and even reads the tumbler.rc correctly and can write to the .thumbnails folder. Just not for image previews (not JPG nor PNG etc.).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am by far no linux expert, so I am pretty much stuck now how to proceed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Btw, on my laptop everything works fine, just not on my workstation. I did update, upgrade, dist-upgrade etc. on both of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Just saw that I also get previews for BMPs.&lt;/p&gt;&#xA;" OwnerUserId="3813" LastEditorDisplayName="user170" LastEditDate="2016-12-01T15:32:46.840" LastActivityDate="2016-12-01T15:32:46.840" Title="Pantheon Files doesnt show thumbnails for images in Freya" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4036" PostTypeId="2" ParentId="4032" CreationDate="2016-01-19T09:08:09.100" Score="2" Body="&lt;p&gt;You can read the error message, right? Here are the steps to resolve similar case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For first time only:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install apt-file&#xA;$ apt-file update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Regular steps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ locate -r Python.h$&#xA;/usr/include/python2.7/Python.h&#xA;&#xA;$ apt-file find /usr/include/python2.7/Python.h&#xA;libpython2.7-dev: /usr/include/python2.7/Python.h&#xA;&#xA;$ sudo apt-get install libpython2.7-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1239" LastEditorUserId="1239" LastEditDate="2016-01-19T14:16:16.957" LastActivityDate="2016-01-19T14:16:16.957" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4038" PostTypeId="1" CreationDate="2016-01-19T13:27:29.580" Score="3" ViewCount="178" Body="&lt;p&gt;I am aware that this is an usual Linux issue so that OS doesn't change sound to HDMI output automatically when HDMI screen is available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However Elementary OS team managed to make HDMI screen to work much better than ANY other unix distribution (even on Ubuntu it doesn't work properly) so maybe it would be possible to have the same awesome functionality for sound as well ?&lt;/p&gt;&#xA;" OwnerUserId="3814" LastEditorUserId="3757" LastEditDate="2016-04-04T02:13:10.190" LastActivityDate="2016-04-04T02:13:10.190" Title="Elementary OS Freya. HDMI sound is not changing automatically" Tags="|release-freya|sound|hdmi|" AnswerCount="0" CommentCount="1" ClosedDate="2016-04-07T17:48:20.967" ContentLicense="CC BY-SA 3.0" />
  <row Id="4039" PostTypeId="2" ParentId="2594" CreationDate="2016-01-19T14:01:47.333" Score="1" Body="&lt;p&gt;This looks the hard drive has failed while using VLC. The unknown filesystem part shows that there is data corruption (maybe even your files). And when Windows goes corrupt it shows even more damage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With those noises you've got an HDD failiure . And when it says &lt;code&gt;No Bootable Device&lt;/code&gt; your HDD has completely failed. You may or may not be able to get back your files without data recovery service. Try booting in a few days and see if it boots. Check for broken sata cables etc.Also I would like to know your pc model and if it has being failing with S.M.A.R.T&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-19T14:01:47.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4040" PostTypeId="2" ParentId="2359" CreationDate="2016-01-19T14:13:27.427" Score="1" Body="&lt;p&gt;I had the same dependency problem.But instead of fighting with the dependencies I added the ubuntu-wine PPA by using &lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa -y &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install wine&lt;/code&gt;(which I found at &lt;a href=&quot;https://askubuntu.com/questions/316025/how-to-install-and-configure-wine&quot;&gt;https://askubuntu.com/questions/316025/how-to-install-and-configure-wine&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I recommend you roll-back your changes and run &lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa -y &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install wine&lt;/code&gt;(which didn't break the touchpad  (synaptics) on my laptop)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-19T14:13:27.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4041" PostTypeId="1" AcceptedAnswerId="4045" CreationDate="2016-01-19T14:29:32.110" Score="2" ViewCount="590" Body="&lt;p&gt;I want to have a separate wallpaper for my login screen which is not my desktop wallpaper. When I set a desktop wallpaper it is also set as the login  screen wallpaper and how can I use two different wallpapers. Any Help?&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2018-08-18T05:45:43.847" Title="Changing the login screen wallpaper without changing the desktop wallpaper" Tags="|release-freya|desktop|wallpaper|greeter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4042" PostTypeId="2" ParentId="4029" CreationDate="2016-01-19T14:51:02.387" Score="2" Body="&lt;p&gt;It's definitely possible to restore Windows 7 and remove Elementary. You'll need a Windows 7 restore disc to do so. One might have come with your computer. If you don't have one, you can create one:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Get your Windows 7 Installation disc or &lt;a href=&quot;https://www.microsoft.com/en-us/software-download/windows7&quot; rel=&quot;nofollow&quot;&gt;download the ISO from Microsoft&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Follow &lt;a href=&quot;https://www.microsoft.com/en-us/download/windows-usb-dvd-download-tool&quot; rel=&quot;nofollow&quot;&gt;these instructions&lt;/a&gt; to create a bootable recovery drive.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You'll need to do this before you remove Windows, of course.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you boot into the Elementary install DVD/USB, you'll have the option to try Elementary before you install it. I'd recommend doing that to make sure everything works properly before you erase Windows. Enjoy! :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-19T14:51:02.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4043" PostTypeId="1" CreationDate="2016-01-19T15:01:19.453" Score="1" ViewCount="192" Body="&lt;p&gt;My cursor frequently gets &quot;stuck&quot; in drag mode. For example, I'll start dragging a window header or border, but when I release the mouse button, the cursor will keep dragging. It's as if Elementary doesn't realize I've released the button. Opening Slingshot usually gets the cursor to go back into normal mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similarly, when I click and hold an app header to drag it, the app will maximize instead. This keeps happening until I log out and back in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Edit] I'm also experiencing the two-finger scroll issue noted in &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1454473&quot; rel=&quot;nofollow&quot;&gt;this Ubuntu bug&lt;/a&gt;. Not sure whether it's related.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This behavior doesn't happen in Windows or Fedora 22.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts on how I might fix this? Is this a driver issue, a problem with Pantheon, or something else? I'm running Freya 0.3.2 on a Dell XPS 13 and using the built-in trackpad. Thanks in advance for your help!&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2016-01-19T18:10:48.400" LastActivityDate="2016-01-19T18:10:48.400" Title="&quot;Stuck&quot; in drag mode" Tags="|release-freya|mouse|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-28T20:38:10.573" ContentLicense="CC BY-SA 3.0" />
  <row Id="4044" PostTypeId="2" ParentId="1004" CreationDate="2016-01-19T17:36:37.913" Score="1" Body="&lt;p&gt;If anywone having same issue, looks like it was an error when install dkms, incompatible with the kernel version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solved unnistalling everything of nvidia propietary drivers and configuring bumblebee to use nouveau kernel drivers&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2016-01-19T17:36:37.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4045" PostTypeId="2" ParentId="4041" CreationDate="2016-01-19T17:39:39.600" Score="1" Body="&lt;p&gt;On beta versions of freya, in /usr/share/backgrounds where a file called something like &quot;elementaryos-default-wallpaper&quot; changing the name to &quot;elementaryos-default-wallpaper.bak&quot; and adding a image renamed to &quot;elementaryos-default-wallpaper&quot; change login screen. Not sure if it still works&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way you should change wallpaper on desktop, via right click on image, not in swichtboard, otherwise it will change also the login screen.&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2016-01-19T17:39:39.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4046" PostTypeId="2" ParentId="4029" CreationDate="2016-01-19T17:43:47.433" Score="0" Body="&lt;p&gt;If you want to install windows after elementary install, you should make a repartition of your hard drive, and install windows on this partition you make.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, if you install windows after elementary, you will need to run elementary's live-CD to reinstall and update Grub because windows tend to break it.&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2016-01-19T17:43:47.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4047" PostTypeId="2" ParentId="4031" CreationDate="2016-01-19T17:52:10.900" Score="1" Body="&lt;p&gt;Maybe you had use and old freya ISO version? In 0.3 and 0.3.1 there were errors with grub-efi installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will to assume you have create a 350mb efi boot partition on install of elementary, if not, you should reinstall creating it as the first partition (primary, 350mb, type &quot;EFI boot&quot;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run elementary's live-CD, connect to internet, open terminal and do this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;once it finish and boot-repair open, click on bottom left to open advanced settings, on main option tab, click on reinstall grub. &#xA;In Grub location tab, check you have selected /efi/boot separate partiton selecting elementary boot efi partition. &#xA;Click on apply, you have to manually reinstall grub following instructions. Once it finish, open again the program and run recommende repair.&#xA;It should repair grub&lt;/p&gt;&#xA;" OwnerUserId="387" LastEditorUserId="3757" LastEditDate="2016-03-20T04:27:39.187" LastActivityDate="2016-03-20T04:27:39.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4048" PostTypeId="2" ParentId="4031" CreationDate="2016-01-19T19:36:19.840" Score="-1" Body="&lt;p&gt;I had a similar problem with my laptop. It turned out to be the BIOS firmware in UEFI mode. Switching to legacy mode solved the issue. Hope it works for you too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The downside of this approach:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) although elementary os boots just fine,  windows 10 does not&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) slower for modern motherboards.&lt;/p&gt;&#xA;" OwnerUserId="3753" LastEditorUserId="3753" LastEditDate="2016-03-21T08:42:41.463" LastActivityDate="2016-03-21T08:42:41.463" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4049" PostTypeId="1" AcceptedAnswerId="4050" CreationDate="2016-01-19T20:45:38.020" Score="1" ViewCount="179" Body="&lt;p&gt;I have set up a keyboard shortcut using the helpful answers at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1946/have-application-menu-open-up-with-only-windows-key&quot;&gt;Have application menu open up with only Windows key&lt;/a&gt; which opens my Applications dock when I use Windows key. However, this is now interfering with other shortcuts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to remove this keyboard shortcut?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't remember which method I used, it was one of the answers in question above, is there a way to check which method I used?&lt;/p&gt;&#xA;" OwnerDisplayName="user3637" LastActivityDate="2016-01-19T22:03:23.010" Title="how to undo keyboard shortcut (Win key launch Applications)" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4050" PostTypeId="2" ParentId="4049" CreationDate="2016-01-19T21:54:02.620" Score="1" Body="&lt;p&gt;Go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Keyboard&lt;/code&gt;. Then select &lt;code&gt;Applications&lt;/code&gt; from the left menu. From the list on the right, change the shortcut of the &lt;code&gt;Applications Launcher&lt;/code&gt; by clicking on it and pressing Super key and Space(the default shortcut). You need to re-login for the shortcut to take effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ep6Mb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ep6Mb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="218" LastEditDate="2016-01-19T22:03:23.010" LastActivityDate="2016-01-19T22:03:23.010" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4051" PostTypeId="2" ParentId="3630" CreationDate="2016-01-20T01:55:24.530" Score="0" Body="&lt;p&gt;If you don't this feature, you can try to uninstall Parental Controls, apparently this has &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2516/68&quot;&gt;helped others&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove switchboard-plug-parental-controls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="68" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-20T01:55:24.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4052" PostTypeId="2" ParentId="3888" CreationDate="2016-01-20T02:19:25.590" Score="1" Body="&lt;p&gt;Different fonts should look different, but the differences might be subtle. That being said, I switched my terminal to &lt;em&gt;Monaco&lt;/em&gt; and the difference is noticable. Font-smoothing is available and enabled by default in Freya, including for the Terminal font, also for &lt;em&gt;Monaco&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I know Pantheon Terminal does not have a dialog to change its font. (There are other ways to do that though.)&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2016-01-20T02:19:25.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4053" PostTypeId="2" ParentId="2678" CreationDate="2016-01-20T03:15:11.363" Score="0" Body="&lt;p&gt;Select one of your old kernel's recovery mode and open shell or terminal and type &lt;code&gt;sudo apt-get purge linux-image-3.19.0.31-generic&lt;/code&gt;.I have used the new kernel with my PC and had no problems (maybe your hardware is incompatible) although I decided to upgrade to Linux Kernel 4.2.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-20T03:15:11.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4055" PostTypeId="1" CreationDate="2016-01-20T07:51:01.090" Score="0" ViewCount="1346" Body="&lt;p&gt;I have five HDD in my machine:&#xA;1. SSD 120 GB (SATA)&#xA;2. HDD 400 GB (ATA133)&#xA;3. HDD 500 GB (SATA)&#xA;4. HDD 500 GB (SATA)&#xA;5. HDD 320 GB (SATA)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On SSD drive I had Windows 10 instaled. I decided to remove windows and install Elementary OS, but when I run installer (from USB pen) it doesn't see SSD hard drive. When I chose &quot;try elementary&quot; I can see SSD but when I try to install I can chose all HDD but no SSD :/&#xA;I change configuration in BIOS from &quot;Native IDE&quot; to &quot;AHCI&quot; but it doesn't change anything. So I decide to remove all data from SSD, and format it as ext4, but this also didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the end I decided to change SATA port for SSD but as you guessed it didn't worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have some idea what can be wrong?&lt;/p&gt;&#xA;" OwnerUserId="3820" LastEditorUserId="3757" LastEditDate="2016-03-20T04:53:32.537" LastActivityDate="2016-03-20T04:53:32.537" Title="Can't install elementary OS on SSD" Tags="|release-freya|system-installation|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4056" PostTypeId="1" CreationDate="2016-01-20T09:07:23.930" Score="1" ViewCount="655" Body="&lt;p&gt;I am having these problems with the newly installed elementary OS. The * in the details represent 'http://' When i was updating I got this, the details are below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2IxAc.jpg&quot; alt=&quot;error when trying to update&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W:Failed to fetch cdrom://elementary OS 0.3 _Freya_ - Stable amd64 (20150411)/dists/trusty/main/binary-amd64/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;, W:Failed to fetch cdrom://elementary OS 0.3 _Freya_ - Stable amd64 (20150411)/dists/trusty/restricted/binary-amd64/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;, W:Failed to fetch cdrom://elementary OS 0.3 _Freya_ - Stable amd64 (20150411)/dists/trusty/main/binary-i386/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;, W:Failed to fetch cdrom://elementary OS 0.3 _Freya_ - Stable amd64 (20150411)/dists/trusty/restricted/binary-i386/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;, W:Failed to fetch *ppa.launchpad.net/glasen/intel-driver/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;, W:Failed to fetch *ppa.launchpad.net/glasen/intel-driver/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;, E:Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3836" OwnerDisplayName="atish_iv" LastEditorUserId="37" LastEditDate="2016-01-25T19:02:42.503" LastActivityDate="2016-01-26T05:39:35.760" Title="Problem with updates in elementary OS" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4058" PostTypeId="2" ParentId="4056" CreationDate="2016-01-20T10:39:46.847" Score="1" Body="&lt;p&gt;I think this problem can be solved by opening Software-Center -&gt; Edit -&gt; Software origin and delete the cd (install from cd). If the system asks, put in your root nick, close the merged little window and wait till the end of the job of Software-Center. Update your system.&lt;/p&gt;&#xA;" OwnerUserId="3805" LastEditorUserId="482" LastEditDate="2016-01-26T05:39:35.760" LastActivityDate="2016-01-26T05:39:35.760" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4059" PostTypeId="1" AcceptedAnswerId="4077" CreationDate="2016-01-20T11:32:49.907" Score="1" ViewCount="923" Body="&lt;p&gt;I already had Windows 10 on my 128 SSD and I did partition about 230 GB from my 1TB hard drive where I installed elementary OS. Installation was successful and there were no problems.     &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At start GRUB shows three options: start elementary OS, start elementary OS in recovery mode (or safe mode, do not remember) and start Windows 10. Everytime I try to start elementary OS it shows only the start screen with the elementary logo and then it restarts computer. If I start it in recovery mode, it succesfully starts but I would like to use it in normal mode. Windows 10 works fine. I am quite new to Linux so I have not found solution by myself. Help me, please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&lt;br&gt;&#xA;Like Suici Doga said, I removed &quot;quiet splash&quot; line from the kernel parameters. Then it started and I updated. Now it starts normally.&lt;/p&gt;&#xA;" OwnerUserId="3823" LastEditorUserId="34" LastEditDate="2016-01-21T20:33:45.970" LastActivityDate="2016-02-29T17:42:20.110" Title="elementary OS not starting from GRUB" Tags="|dual-boot|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4060" PostTypeId="2" ParentId="4055" CreationDate="2016-01-20T11:50:45.763" Score="0" Body="&lt;p&gt;I didn't encrypt any of my hard drives. &#xA;When I run &quot;Try Elementary&quot; I have full access to SSD it is found in system as sda. I cen read it, write it but when I try to install Elementary OS there is no SSD on the list.&#xA;What is interesting I see SSD in option &quot;Device for boot loader instalation&quot;&lt;/p&gt;&#xA;" OwnerUserId="3820" LastActivityDate="2016-01-20T11:50:45.763" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4061" PostTypeId="2" ParentId="984" CreationDate="2016-01-20T12:03:54.607" Score="0" Body="&lt;p&gt;You can try adding Linux boot manager  using EasyBCD. The instructions are at &lt;a href=&quot;https://superuser.com/a/499652/544148&quot;&gt;https://superuser.com/a/499652/544148&lt;/a&gt; .Note after doing this try to avoid updates to the grub boot loader on elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2016-01-20T12:03:54.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4062" PostTypeId="1" CreationDate="2016-01-20T12:13:22.550" Score="0" ViewCount="501" Body="&lt;p&gt;I was instructed that by adding the line &lt;code&gt;OnlyShowin=Pantheon&lt;/code&gt; in the &lt;code&gt;.desktop&lt;/code&gt; file of an app, would make it show on Slingshot menus. I did that with gufw (the firewall app), but it didn't happen. Please advise on what I'm missing. The &lt;code&gt;.desktop&lt;/code&gt; file (located in &lt;code&gt;/usr/share/applications&lt;/code&gt;) is as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry] &#xA;Version=1.0 &#xA;Name=Firewall Configuration &#xA;Comment=An easy way to configure your firewall&#xA;Categories=GNOME;GTK;Settings;Security;X-GNOME-Settings-Panel;X-GNOME-SystemSett‌​ings;X-Unity-Settings-Panel;X-XFCE-SettingsDialog;X-XFCE-SystemSettings;System &#xA;Exec=gufw &#xA;Icon=gufw &#xA;Terminal=false &#xA;Type=Application &#xA;X-GNOME-Settings-Panel=gufw &#xA;X-Unity-Settings-Panel=gufw &#xA;X-Ubuntu-Gettext-Domain=gufw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2770" LastEditorUserId="137" LastEditDate="2016-01-21T18:06:45.310" LastActivityDate="2016-03-21T21:04:55.033" Title="Show an app on Slingshot" Tags="|slingshot|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4063" PostTypeId="2" ParentId="4062" CreationDate="2016-01-20T12:22:27.317" Score="1" Body="&lt;p&gt;Remove &lt;code&gt;OnlyShowin=Pantheon&lt;/code&gt; from the &lt;code&gt;.desktop&lt;/code&gt; file. I didn't have to add &lt;code&gt;OnlyShowin=Pantheon&lt;/code&gt; to get my &lt;code&gt;.desktop&lt;/code&gt; file to show in Slingshot.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-20T12:22:27.317" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4064" PostTypeId="1" CreationDate="2016-01-20T12:58:30.363" Score="1" ViewCount="3728" Body="&lt;p&gt;I am getting the following notice: &quot;Low disk space on &quot;boot&quot;.  The volume &quot;boot&quot; has only 0 bytes disk space remaining.&quot;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a problem?  If so how do I resolve it?  Can I do it via GParted Partition Editor ..... the Editor is installed on my device and is in my System Tools 'folder'.  Per Gparted Editor my boot size is currently set at 243 MiB.&lt;/p&gt;&#xA;" OwnerUserId="3301" LastActivityDate="2016-01-21T19:45:08.827" Title="Low Disk Space on boot warning" Tags="|boot|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-02T09:56:57.737" ContentLicense="CC BY-SA 3.0" />
  <row Id="4066" PostTypeId="1" AcceptedAnswerId="4079" CreationDate="2016-01-20T16:02:50.343" Score="1" ViewCount="1675" Body="&lt;p&gt;I recently purchased a new laptop by Acer, part of the Aspire E15 lineup, and it seems that the WiFi hardware is not supported with the kernel that is being used by Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Elementary is an Ubuntu-based OS, I searched on Ubuntu forums, and &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2304250&quot; rel=&quot;nofollow&quot;&gt;after a lot of digging&lt;/a&gt; managed to backport the driver from a higher kernel version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, somewhere in the thread, it's mentioned that Ubuntu now supports &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2300861&quot; rel=&quot;nofollow&quot;&gt;QCA9377 and ath10k by default.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I was hoping to find out, if the next version of Elementary OS (Loki, 0.4) would include support &quot;out of the box&quot; for Atheros WiFi hardware?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="3826" LastEditorUserId="3757" LastEditDate="2016-03-09T19:40:30.080" LastActivityDate="2016-09-06T10:06:50.967" Title="Kernel version in Loki (0.4)? Support for Atheros WiFi hardware" Tags="|networking|kernel|release-loki|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4067" PostTypeId="2" ParentId="4066" CreationDate="2016-01-20T17:13:11.770" Score="0" Body="&lt;p&gt;The features and kernel for 0.4 are &lt;a href=&quot;https://plus.google.com/+CassidyJames/posts/GzwFLE2mvH5&quot; rel=&quot;nofollow&quot;&gt;still very much in flux&lt;/a&gt;, so there's no way to say for sure what it will or won't support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, Ubuntu periodically releases updates to the &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow&quot;&gt;hardware enablement stack&lt;/a&gt; in 14.04, and these updates generally make their way to Elementary 0.3.x pretty soon after Ubuntu releases them. So, 0.3.x may eventually get the kernel/driver updates you backported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps! :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-20T17:13:11.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4068" PostTypeId="2" ParentId="4055" CreationDate="2016-01-20T18:19:02.680" Score="0" Body="&lt;p&gt;I've found a similar question here. Maybe the answer there can help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3975/cannot-choose-hdd-at-installation?rq=1&quot;&gt;Cannot choose HDD at installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3744" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-20T18:19:02.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4070" PostTypeId="1" AcceptedAnswerId="4073" CreationDate="2016-01-20T18:31:16.853" Score="0" ViewCount="508" Body="&lt;p&gt;There is an answered question at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2440/where-is-the-option-to-add-online-accounts-listed-it-certainly-isnt-under-sett&quot;&gt;Where is the option to add online accounts listed? It certainly isn&amp;#39;t under settings in my system!&lt;/a&gt; but I don't think the answer is correct.&#xA;When Elementary Freya was finally released, many tech sites published &quot;what's news&quot; topics on Freya, which mentioned Online Account.&#xA;So how can I get Online Account working?&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="3827" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-01-20T20:26:39.343" Title="No Online Account in Freya 0.3.2" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ClosedDate="2016-01-21T14:41:15.133" ContentLicense="CC BY-SA 3.0" />
  <row Id="4071" PostTypeId="1" AcceptedAnswerId="4075" CreationDate="2016-01-20T20:04:58.187" Score="-1" ViewCount="688" Body="&lt;p&gt;How to easily access a music CD after having inserted it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is automatic play-when-inserted possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want to insert the CD and then with a click or two start playing in a music player that would hopefully also fetch the proper names (CDDB, freeDB).&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-01-20T20:53:15.200" LastActivityDate="2016-03-15T13:54:43.047" Title="How to easily start playing an Audio CD - with CDDB/freeDB support?" Tags="|audio|audio-cd|audio-player|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4072" PostTypeId="1" AcceptedAnswerId="4074" CreationDate="2016-01-20T20:18:11.193" Score="2" ViewCount="653" Body="&lt;p&gt;Installing Wine brings notepad in the Open with - context menu of the file manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to remove Notepad option from the context menu of the File manager?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2fwU9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2fwU9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-01-27T12:34:45.793" Title="How to remove notepad from Files/open-with context menu?" Tags="|files|menu|wine|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4073" PostTypeId="2" ParentId="4070" CreationDate="2016-01-20T20:26:39.343" Score="2" Body="&lt;p&gt;This isn't a feature that got into Freya. However looking at a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1477307&quot; rel=&quot;nofollow&quot;&gt;couple&lt;/a&gt; &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-onlineaccounts/+bug/1386280&quot; rel=&quot;nofollow&quot;&gt;of&lt;/a&gt; &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-onlineaccounts/+bug/1494018&quot; rel=&quot;nofollow&quot;&gt;bugreports&lt;/a&gt; that target loki(the next version) it seems that it will be available in the next version.&lt;/p&gt;&#xA;" OwnerUserId="124" LastActivityDate="2016-01-20T20:26:39.343" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4074" PostTypeId="2" ParentId="4072" CreationDate="2016-01-20T20:34:22.973" Score="2" Body="&lt;p&gt;As posted in &lt;a href=&quot;https://askubuntu.com/a/186501/47206&quot;&gt;this askubuntu answer&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;&quot;wine-notepad creates a local mime association for text/plain and some other types in the file ~/.local/share/applications/mimeinfo.cache; this effectively allows it as an alternative to anything gedit (or your default GUI editor) would otherwise open&quot;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did (as also said in a comment under that answer): &lt;strong&gt;deleted altogether the file &lt;code&gt;~/.local/share/applications/mimeinfo.cache&lt;/code&gt;.&lt;/strong&gt; &lt;em&gt;&quot;everything seems to default to my editor of choice&quot;&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-01-27T12:34:45.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4075" PostTypeId="2" ParentId="4071" CreationDate="2016-01-20T20:35:03.857" Score="1" Body="&lt;p&gt;&lt;strong&gt;Audacious&lt;/strong&gt; can start playing an audio CD by going to &lt;em&gt;Services, Play CD&lt;/em&gt;, and it has good CDDB support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install audacious&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;audacious&lt;/code&gt; will just start the application, but &lt;code&gt;audacious cdda://&lt;/code&gt; will start playing the Audio CD in Audacious.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, that can be run with a short-key or by creating an Audacious desktop file in &lt;code&gt;usr/share/applications&lt;/code&gt; with the above command and then make that executable so that it will be found with the Super-Space launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To easily do that in terminal we need a text editor like Gedit, Leafpad or Mousepad (&lt;a href=&quot;https://elementaryos.stackexchange.com/q/328/170&quot;&gt;Scratch is not usable in the same way&lt;/a&gt;.) The example here is with Gedit.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/audacious_cd.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There, paste this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Categories=AudioVideo;Player;Audio;Qt;&#xA;Exec=audacious cdda://&#xA;Icon=audacious&#xA;Name=Play Audio CD with Audacious&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, save, close and do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /usr/share/applications/audacious_cd.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, in Applications launcher, when typing 'CD', you should see &quot;Play Audio CD with Audacious&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if prefered, a such desktop file can be dragged&amp;amp;dropped onto the dock too.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The same is possible for &lt;strong&gt;Qmmp&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:forkotov02/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install qmmp qmmp-plugin-pack&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then add the following command to a short-key (or to a desktop file as above):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;qmmp cdda://&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Deadbeef&lt;/strong&gt; will play a CD with the option &lt;em&gt;File-Add audio CD&lt;/em&gt;, which adds the CD tracks to a playlist. -- Or with the command &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deadbeef all.cda&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which then can be used as specified in the other cases above. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Deadbeef&lt;/strong&gt; had a bug that prevented it from fetching CDDB metadata.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix that be sure that &quot;Prefer CD-Text over CDDB&quot; under Preferences-Plugins-Audio CD player-Configure is NOT checked. Details &lt;a href=&quot;https://unix.stackexchange.com/a/257717/32012&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-03-15T13:54:43.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4077" PostTypeId="2" ParentId="4059" CreationDate="2016-01-21T01:36:02.947" Score="1" Body="&lt;p&gt;Can you start the system while holding down shift. Select your kernel and press e. Then remove quiet splash from the kernel parameters. This will allow you to see the boot output.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-21T01:36:02.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4079" PostTypeId="2" ParentId="4066" CreationDate="2016-01-21T05:59:07.373" Score="1" Body="&lt;p&gt;elementary OS is based on Ubuntu Longterm Releases. Loki will therefore be based on Ubuntu 16.04. Ubuntu 16.04 will have the Linux Kernel 4.4 as base as &lt;a href=&quot;http://news.softpedia.com/news/ubuntu-16-04-lts-xenial-xerus-will-be-powered-by-linux-kernel-4-4-lts-496675.shtml&quot; rel=&quot;nofollow&quot;&gt;announced&lt;/a&gt;. So for the first release of elementary OS, this kernel will be the base.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, your hardware should be supported in Loki, yes.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-01-21T05:59:07.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4080" PostTypeId="1" CreationDate="2016-01-21T07:42:34.730" Score="1" ViewCount="148" Body="&lt;p&gt;I'm having problems with my terminal. When I boot up, the terminal starts at startup, I'm using zsh (prezto) it may take a while for my terminal to be fully operational. My problem right now (just occurred) is that my terminal does not respond entirely. It just stays like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vMl7h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vMl7h.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Opening another tab does not help and neither does opening a new window. Searching for a solution on google is not fruitful either. Also, when I open a new tab and close it immediately elementary logs me out closing all applications.&lt;/p&gt;&#xA;" OwnerUserId="3733" LastEditorUserId="3733" LastEditDate="2016-01-21T08:18:45.530" LastActivityDate="2016-01-29T04:56:30.803" Title="Terminal does not respond" Tags="|pantheon-terminal|" AnswerCount="0" CommentCount="4" ClosedDate="2016-10-09T00:23:42.040" ContentLicense="CC BY-SA 3.0" />
  <row Id="4081" PostTypeId="2" ParentId="4062" CreationDate="2016-01-21T16:22:23.897" Score="1" Body="&lt;p&gt;If you place the &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;~/.local/share/applications&lt;/code&gt; instead of &lt;code&gt;/usr/share/applications&lt;/code&gt;, does that fix the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#app-launchers&quot; rel=&quot;nofollow&quot;&gt;Human Interface Guidelines&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Users may create their own launchers by putting .desktop files in &lt;code&gt;~/.local/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-21T16:22:23.897" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4082" PostTypeId="2" ParentId="4062" CreationDate="2016-01-21T16:32:05.977" Score="0" Body="&lt;p&gt;If what you are trying to achieve is to show an application or program in the Slingshot menu, I have done it by following the instructions located &lt;a href=&quot;http://elementaryosandmore.blogspot.com/2013/06/how-to-add-and-modify-applications-in.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which in short are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --no-install-recommends alacarte&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/alacarte/Alacarte/MenuEditor.py&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you have to replace the string &lt;code&gt;applications.menu&lt;/code&gt; with &lt;code&gt;pantheon-applications.menu&lt;/code&gt; (all occurrences).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, from the terminal: &lt;code&gt;sudo alacarte&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And there, you're done.  You can now add shortcuts to the Slingshot menu and personalize categories.&lt;/p&gt;&#xA;" OwnerUserId="3571" LastActivityDate="2016-01-21T16:32:05.977" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4083" PostTypeId="2" ParentId="4072" CreationDate="2016-01-21T17:42:03.003" Score="1" Body="&lt;p&gt;From the image you provide, it seems that the behavior you encounter is with text files (.txt).  IF it is such, then you can modify the list of &quot;Open With&quot; applications in the context menu like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a terminal, go to: &lt;code&gt;/usr/share/applications&lt;/code&gt; then do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch-text-editor mimeinfo.cache&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There, find the line containing the string &lt;code&gt;text/plain&lt;/code&gt;.  Change the list of associations to whatever you want (notepad should appear there so you just edit accordingly).  Save and exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch-text-editor defaults.list&lt;/code&gt;  and repeat the operation from above.&lt;/p&gt;&#xA;" OwnerUserId="3571" LastActivityDate="2016-01-21T17:42:03.003" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4084" PostTypeId="2" ParentId="4064" CreationDate="2016-01-21T19:45:08.827" Score="2" Body="&lt;p&gt;Problem: Old, useless kernel copies that are generated when you upgrade them stuffed your tiny boot partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solution: The package manager has gotten it from long years ago.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open a terminal&lt;/li&gt;&#xA;&lt;li&gt;Do &lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;If it says 'yes or no?' then say 'Y.'&lt;/li&gt;&#xA;&lt;li&gt;Wait a sec and you're good.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Impact: You possibly become unable to reboot if the newest kernel is broken but if you're using sufficiently cool hard disk then enough, just do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad English, though. It's very informal, also.&lt;/p&gt;&#xA;" OwnerUserId="3843" LastActivityDate="2016-01-21T19:45:08.827" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4085" PostTypeId="2" ParentId="2760" CreationDate="2016-01-21T21:28:46.190" Score="4" Body="&lt;p&gt;You will need to install the GTK developer tools first.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libgtk-3-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you will be able to enable the inspector either via the dconf editor, or by executing the terminal command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gtk.Settings.Debug enable-inspector-keybinding true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can then launch the Inspector with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;i&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my experience, the GTK Inspector takes a very long time to load the first time you launch it after launching your GTK app. But after the initial launch, you can close it and it will relaunch much faster.&lt;/p&gt;&#xA;" OwnerUserId="3846" LastActivityDate="2016-01-21T21:28:46.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4086" PostTypeId="1" CreationDate="2016-01-22T00:55:21.920" Score="3" ViewCount="1449" Body="&lt;p&gt;I am running elementary OS 0.3.2 Freya (64-bit).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under &quot;Power&quot; in &quot;System Settings&quot;, the &quot;Turn off screen when inactive&quot; is not working.  I have it set to 10 minutes, and when the timer is up, instead of the screen turning off it displays a bunch of vertical lines composed of the colors from my desktop background, at full brightness.  I had to run an &quot;unburn/stuck pixel&quot; video to retrain my lcd since the vertical lines &quot;burned in&quot; slightly.  Fortunately there was no lasting damage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a fix for this setting?  Also, there is no screensaver setting with this distribution, and I cannot find one under &quot;software Center&quot;. I would like one as a backup due to the inactive screen issue.  Any suggestions? &lt;/p&gt;&#xA;" OwnerUserId="3847" LastActivityDate="2017-11-05T20:40:46.230" Title="&quot;Turn off screen when inactive&quot; not working, and need a screensaver" Tags="|release-freya|system|display|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4087" PostTypeId="2" ParentId="101" CreationDate="2016-01-22T01:02:44.687" Score="4" Body="&lt;p&gt;If you, like me, prefer K-Find rather than Gnome Search Tool, then install K-Find through &lt;code&gt;sudo apt-get install kfind&lt;/code&gt;, run &lt;code&gt;sudo nano /usr/share/contractor/find.contract&lt;/code&gt; (see &lt;a href=&quot;https://github.com/elementary/contractor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/contractor&lt;/a&gt; for more info) and paste the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Search here&#xA;Description=Find files here&#xA;MimeType=inode;application/x-sh;application/x-executable;&#xA;Exec=kfind %f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then hit &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;O&lt;/kbd&gt; (letter 'O', not number '0') to save and &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; to exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use K-Find, open the folder where you want to locate your file, right click any empty area of the window and click &quot;Search here&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5K6UV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5K6UV.png&quot; alt=&quot;K-Find&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3848" LastEditorUserId="19216" LastEditDate="2020-02-15T01:57:56.757" LastActivityDate="2020-02-15T01:57:56.757" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="4089" PostTypeId="2" ParentId="4055" CreationDate="2016-01-22T10:44:19.430" Score="1" Body="&lt;p&gt;Thanks all of you for help. &#xA;Problem solved. This is how I manage it:&#xA;I remove all partition from SSD and I created newone ext4 partition, but I still couldn't install elementary on this disk. Once I reboot my PC I forgot to boot it from USB drive. I saw Windows logo and after a moment message shows that my windows is broken and need to be repaired. Then enlight me that in MBR there is information that on this disk Windows 10 is installed and propably Elementary installer prevent me to install it on this disk because of this. So I started elementary from USB drive, start gparted and recreate partition tabele (this errase mbr from HDD). After that I could install Elementary OS :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right Now I'm testing elementary as my primary OS. If if it meets my expectations few $ will be transfeered from my account to elementary support :D&lt;/p&gt;&#xA;" OwnerUserId="3820" LastActivityDate="2016-01-22T10:44:19.430" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4090" PostTypeId="1" CreationDate="2016-01-22T13:41:55.583" Score="2" ViewCount="1086" Body="&lt;p&gt;I've got an azerty keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I installed Freya, the keyboard in the greeter is in qwerty, and no way to change it. This is really annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that this bug has been encountered since the beginning of Freya, and hasn't be solved. I found several forum threads talking about :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;[fr] &lt;a href=&quot;http://forum.elementaryos-fr.org/topic/720-clavier-azerty-au-moment-du-login/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forum.elementaryos-fr.org/topic/720-clavier-azerty-au-moment-du-login/&lt;/a&gt; &lt;/li&gt;&#xA;&lt;li&gt;[fr] &lt;a href=&quot;https://forum.ubuntu-fr.org/viewtopic.php?id=670561&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.ubuntu-fr.org/viewtopic.php?id=670561&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1334/i-cant-login-into-freya?newreg=2db351b078414a0da9c367c559dae3aa&quot;&gt;I can&amp;#39;t login into freya&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3415/language-changes-when-i-am-tying-to-enter-password-to-login-in-system&quot;&gt;Language changes when I am tying to enter password to login in system&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And none of them gave me a succuessful answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My colleague installed Freya some time after me, and he have the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things I've done :&#xA;- put the whole system in french using system settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things I've tried, without any success :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;checked /etc/default/keyboard&lt;/li&gt;&#xA;&lt;li&gt;added a section in Xorg conf&lt;/li&gt;&#xA;&lt;li&gt;installed lightdm-gtk-greeter (keyboard still in qwerty).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;[new]&#xA;Installing ubuntu-greeter, I got an azerty login (see my comment on the answer below). So the problem resides in the difference between ubuntu-greeter and pantheon-greeter/lightdm-gtk-greeter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my /usr/share/X11/xorg.conf.d/10-evdev.conf :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;InputClass&quot;&#xA;    Identifier &quot;evdev keyboard catchall&quot;&#xA;    MatchIsKeyboard &quot;on&quot;&#xA;    MatchDevicePath &quot;/dev/input/event*&quot;&#xA;    Driver &quot;evdev&quot;&#xA;    # set keyboard to french&#xA;    Option &quot;XkbModel&quot; &quot;pc105&quot;&#xA;    Option &quot;XkbLayout&quot; &quot;fr&quot;&#xA;    Option &quot;XkbVariant&quot; &quot;oss&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;my /etc/default/keyboard&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XKBLAYOUT=fr,us&#xA;XKBVARIANT=,oss,&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(And probably many others I don't remember. But just ask me to try something, and I'll try if you think it can change something)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Change your password&quot;, &quot;use auto-login&quot;, or any other such answer will be disregarded; I'm really looking for understanding what's going on, and getting the correct configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the contrary, any question will be answered, and any :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;reference to some relevant forum/bug&lt;/li&gt;&#xA;&lt;li&gt;suggestion for solving this problem,&lt;/li&gt;&#xA;&lt;li&gt;indication of which log files can be relevant,&lt;/li&gt;&#xA;&lt;li&gt;indication of which source files can be relevant (I can fix and recompile a package if necessary)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;, will be welcome.&lt;/p&gt;&#xA;" OwnerUserId="3855" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-05-18T07:36:38.403" Title="Unable to change keyboard layout in elementary os freya" Tags="|release-freya|greeter|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4091" PostTypeId="1" AcceptedAnswerId="4406" CreationDate="2016-01-22T14:41:09.327" Score="2" ViewCount="2270" Body="&lt;p&gt;Noob question coming - after I installed elementary tweaks I was trying to find an appealing icon set to my desktop. After rebooting and logging in again my desktop became a mess. I installed timeshift the day before, but unfortunately it seems it couldn't back up my settings as the scheduled backups was turned off somehow and therefore was no restoring point to stick to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how it looks alike:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/jw090.jpg&quot; alt=&quot;two muppets&quot; title=&quot;tooltip&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the second desktop running in a window I can even use right click, make directories, etc. The directory I made appeared in my Desktop folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried &lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt;, which doesn't make a difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output of &lt;code&gt;apt-cache policy &quot;pantheon*&quot;&lt;/code&gt; is below.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-photos-common:&#xA;  Installed: 0.1.2+r2848+pkg19~ubuntu0.3.1.1&#xA;  Candidate: 0.1.2+r2848+pkg19~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.1.2+r2848+pkg19~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;libpantheon-files-core-dev:&#xA;  Installed: (none)&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA;     0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;pantheon-files-dbg:&#xA;  Installed: (none)&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA;     0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;pantheon-shell:&#xA;  Installed: 1.379+426~ubuntu0.3.1&#xA;  Candidate: 1.379+426~ubuntu0.3.1&#xA;  Version table:&#xA; *** 1.379+426~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;plank-theme-pantheon:&#xA;  Installed: (none)&#xA;  Candidate: 4.0.6.1-0~r540+pkg305~ubuntu0.3.1.1&#xA;  Version table:&#xA;     4.0.6.1-0~r540+pkg305~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;switchboard-plug-pantheon-shell-dbg:&#xA;  Installed: (none)&#xA;  Candidate: 0.2.2.1-0~410~ubuntu0.3.2.1&#xA;  Version table:&#xA;     0.2.2.1-0~410~ubuntu0.3.2.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;pantheon-print-dbg:&#xA;  Installed: (none)&#xA;  Candidate: 0.1.2-0~r11+pkg10~ubuntu0.3.1&#xA;  Version table:&#xA;     0.1.2-0~r11+pkg10~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;pantheon-calculator:&#xA;  Installed: 0.1.0.1+r140+pkg8~ubuntu0.3.1&#xA;  Candidate: 0.1.0.1+r140+pkg8~ubuntu0.3.1&#xA;  Version table:&#xA; *** 0.1.0.1+r140+pkg8~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-terminal:&#xA;  Installed: 0.3.2-0~r786+pkg39~ubuntu0.3.1.1&#xA;  Candidate: 0.3.2-0~r786+pkg39~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.3.2-0~r786+pkg39~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-files:&#xA;  Installed: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon:&#xA;  Installed: 1.379+426~ubuntu0.3.1&#xA;  Candidate: 1.379+426~ubuntu0.3.1&#xA;  Version table:&#xA; *** 1.379+426~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-photos:&#xA;  Installed: 0.1.2+r2848+pkg19~ubuntu0.3.1.1&#xA;  Candidate: 0.1.2+r2848+pkg19~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.1.2+r2848+pkg19~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;libpantheon-files-widgets-dev:&#xA;  Installed: (none)&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA;     0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;pantheon-photos-dbg:&#xA;  Installed: (none)&#xA;  Candidate: 0.1.2+r2848+pkg19~ubuntu0.3.1.1&#xA;  Version table:&#xA;     0.1.2+r2848+pkg19~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;libpantheon-files-widgets0:&#xA;  Installed: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-terminal-dbg:&#xA;  Installed: (none)&#xA;  Candidate: 0.3.2-0~r786+pkg39~ubuntu0.3.1.1&#xA;  Version table:&#xA;     0.3.2-0~r786+pkg39~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;libpantheon-files-core0:&#xA;  Installed: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Candidate: 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 0.2.4-0~r1980+pkg47~ubuntu0.3.1.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;switchboard-plug-pantheon-shell:&#xA;  Installed: 0.2.2.1-0~410~ubuntu0.3.2.1&#xA;  Candidate: 0.2.2.1-0~410~ubuntu0.3.2.1&#xA;  Version table:&#xA; *** 0.2.2.1-0~410~ubuntu0.3.2.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-print:&#xA;  Installed: 0.1.2-0~r11+pkg10~ubuntu0.3.1&#xA;  Candidate: 0.1.2-0~r11+pkg10~ubuntu0.3.1&#xA;  Version table:&#xA; *** 0.1.2-0~r11+pkg10~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-xsession-settings:&#xA;  Installed: 0.5-0~63~ubuntu0.3.1&#xA;  Candidate: 0.5-0~63~ubuntu0.3.1&#xA;  Version table:&#xA; *** 0.5-0~63~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;pantheon-greeter:&#xA;  Installed: 2.0.2+r405+pkg44~daily~ubuntu0.3.1.1&#xA;  Candidate: 2.0.2+r405+pkg44~daily~ubuntu0.3.1.1&#xA;  Version table:&#xA; *** 2.0.2+r405+pkg44~daily~ubuntu0.3.1.1 0&#xA;        100 /var/lib/dpkg/status&#xA;     2.0.2-0~r370+pkg43~ubuntu0.3.1 0&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu/ trusty/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I only began to use elementary and linux in general and also this is my first question here, so hopefully it was detailed enough to let some of you help my solving this situation. Cheers!&lt;/p&gt;&#xA;" OwnerUserId="3850" LastEditorUserId="26" LastEditDate="2016-02-16T20:50:15.820" LastActivityDate="2018-01-08T17:51:58.090" Title="How to fix pantheon desktop if I got this messed up screen after I log in?" Tags="|pantheon|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4092" PostTypeId="1" CreationDate="2016-01-22T15:28:11.470" Score="1" ViewCount="74" Body="&lt;p&gt;I'm writing a desktop entry file for a program that doesn't come with one. The icon the program has on Windows is a circle, but the one I found on the web has an annoying white square background. I'm trying to make a circle icon, but to do so I need a transparent background. I've tried using the .gif and .png file types, but they don't show up in the dock or Slingshot.&#xA;Is there a filetype that will keep the transparent background but still show up in the dock/Slingshot?&lt;/p&gt;&#xA;" OwnerUserId="391" LastActivityDate="2016-01-22T15:28:11.470" Title="File type for Slingshot/Dock Icons" Tags="|icons|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4093" PostTypeId="2" ParentId="2821" CreationDate="2016-01-22T15:32:42.370" Score="-2" Body="&lt;p&gt;Run sudo su it will look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@_______-Computer:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3857" LastEditorUserId="242" LastEditDate="2016-01-22T17:41:57.407" LastActivityDate="2016-01-22T17:41:57.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4095" PostTypeId="1" CreationDate="2016-01-22T16:40:20.083" Score="2" ViewCount="1690" Body="&lt;p&gt;Whenever I play music in Noise, it pauses when the screen locks? Any solution?&lt;/p&gt;&#xA;" OwnerUserId="3353" LastEditorUserId="5565" LastEditDate="2016-10-21T06:21:55.857" LastActivityDate="2023-07-25T12:51:40.700" Title="Music stops/pauses when the screen locks" Tags="|greeter|music|audio|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4096" PostTypeId="1" CreationDate="2016-01-22T17:25:46.817" Score="2" ViewCount="35" Body="&lt;p&gt;I have an Ubuntu Phone and there's a program on there which is called WifiTransfer. It is a program to exchange files from the phone via ftp. It says that normally you would be able to see the device (on stock Ubuntu) when you view the entire network. This is not the case in Files. When I use the option in Files to connect to a server and follow the instructions to connect to the device via ftp, the error message I get is that my user data are invalid, which is not the case. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone what the reason is I can't connect to this ftp-device?&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2016-01-22T17:25:46.817" Title="Connecting from Files to WifiTransfer" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4097" PostTypeId="1" AcceptedAnswerId="4109" CreationDate="2016-01-22T18:32:17.213" Score="2" ViewCount="103" Body="&lt;p&gt;I've just received an wallpaper package from Software Updater. I updated it but no new wallpapers show up in Setting-&gt;Desktop-&gt;Wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where are the new wallpapers saved? or&#xA;How can I make these new wallpaper appear in Setting-&gt;Desktop-&gt;Wallpaper.&lt;/p&gt;&#xA;" OwnerUserId="3827" LastActivityDate="2016-01-23T14:40:26.517" Title="Freya 0.3.2 New wallpaper package updated but no new wallpapers show up" Tags="|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4098" PostTypeId="1" CreationDate="2016-01-22T22:32:44.343" Score="-1" ViewCount="416" Body="&lt;p&gt;&lt;em&gt;Currently running on Elementary  OS 0.3.2 freya 64bit&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Software Updater&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WTpjV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WTpjV.png&quot; alt=&quot;Software Updater&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;i ran sudo apt-get update and i found some broken packages&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Fetched 2,550 kB in 7s (328 kB/s)&#xA;W: Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-amd64/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;&#xA;W: Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-i386/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/fsvh/pacifica-icon-theme/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/fsvh/pacifica-icon-theme/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/freya-getdeb/apps/binary-amd64/Packages  404  Not Found [IP: 104.28.24.125 80]&#xA;&#xA;W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/freya-getdeb/games/binary-amd64/Packages  404  Not Found [IP: 104.28.24.125 80]&#xA;&#xA;W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/freya-getdeb/apps/binary-i386/Packages  404  Not Found [IP: 104.28.24.125 80]&#xA;&#xA;W: Failed to fetch http://archive.getdeb.net/ubuntu/dists/freya-getdeb/games/binary-i386/Packages  404  Not Found [IP: 104.28.24.125 80]&#xA;&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;from the error lists, does that mean canonical, getdeb and pacifica icon are  down or what?&#xA;I've read some other posts and the solution seemed to be removing the ppa s, however i'm afraid that i won't get the updates after removing them.&lt;/p&gt;&#xA;" OwnerUserId="1153" LastEditorUserId="3757" LastEditDate="2016-05-06T08:51:41.080" LastActivityDate="2016-05-06T08:51:41.080" Title="Software Updater: failed to download repository information" Tags="|release-freya|updates|ubuntu|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4099" PostTypeId="1" CreationDate="2016-01-22T22:44:05.430" Score="2" ViewCount="550" Body="&lt;p&gt;With new version of VLC you cannot automatically download the subtitles.&#xA;The only solution is to install vlc-2.0.8:&#xA;I get the source file from &lt;a href=&quot;https://download.videolan.org/vlc/2.0.8/vlc-2.0.8.tar.xz&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&#xA;The I run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tar xf vlc-2.0.8.tar.xz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd vlc-2.0.8&#xA;./configure&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the result is &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;checking build system type... x86_64-unknown-linux-gnu&#xA;checking host system type... x86_64-unknown-linux-gnu&#xA;checking for a BSD-compatible install... /usr/bin/install -c&#xA;checking whether build environment is sane... yes&#xA;checking for a thread-safe mkdir -p... /bin/mkdir -p&#xA;checking for gawk... no&#xA;checking for mawk... mawk&#xA;checking whether make sets $(MAKE)... yes&#xA;checking how to create a ustar tar archive... gnutar&#xA;checking whether make supports nested variables... yes&#xA;checking whether to enable maintainer-specific portions of Makefiles... yes&#xA;checking for style of include used by make... GNU&#xA;checking for gcc... gcc&#xA;checking whether the C compiler works... yes&#xA;checking for C compiler default output file name... a.out&#xA;checking for suffix of executables... &#xA;checking whether we are cross compiling... no&#xA;checking for suffix of object files... o&#xA;checking whether we are using the GNU C compiler... yes&#xA;checking whether gcc accepts -g... yes&#xA;checking for gcc option to accept ISO C89... none needed&#xA;checking dependency style of gcc... gcc3&#xA;checking for gcc option to accept ISO C99... -std=gnu99&#xA;checking how to run the C preprocessor... gcc -std=gnu99 -E&#xA;checking for grep that handles long lines and -e... /bin/grep&#xA;checking for egrep... /bin/grep -E&#xA;checking for ANSI C header files... yes&#xA;checking for sys/types.h... yes&#xA;checking for sys/stat.h... yes&#xA;checking for stdlib.h... yes&#xA;checking for string.h... yes&#xA;checking for memory.h... yes&#xA;checking for strings.h... yes&#xA;checking for inttypes.h... yes&#xA;checking for stdint.h... yes&#xA;checking for unistd.h... yes&#xA;checking minix/config.h usability... no&#xA;checking minix/config.h presence... no&#xA;checking for minix/config.h... no&#xA;checking whether it is safe to define __EXTENSIONS__... yes&#xA;checking whether gcc -std=gnu99 and cc understand -c and -o together... yes&#xA;checking for g++... no&#xA;checking for c++... no&#xA;checking for gpp... no&#xA;checking for aCC... no&#xA;checking for CC... no&#xA;checking for cxx... no&#xA;checking for cc++... no&#xA;checking for cl.exe... no&#xA;checking for FCC... no&#xA;checking for KCC... no&#xA;checking for RCC... no&#xA;checking for xlC_r... no&#xA;checking for xlC... no&#xA;checking whether we are using the GNU C++ compiler... no&#xA;checking whether g++ accepts -g... no&#xA;checking dependency style of g++... none&#xA;checking how to run the C preprocessor... gcc -std=gnu99 -E&#xA;checking for gcc... gcc&#xA;checking whether we are using the GNU Objective C compiler... no&#xA;checking whether gcc accepts -g... no&#xA;checking dependency style of gcc... gcc3&#xA;checking dependency style of gcc... (cached) gcc3&#xA;checking for egrep... (cached) /bin/grep -E&#xA;checking whether make sets $(MAKE)... (cached) yes&#xA;checking dependency style of gcc -std=gnu99... gcc3&#xA;checking for desktop-file-validate... desktop-file-validate&#xA;checking for an ANSI C-conforming const... yes&#xA;checking for inline... inline&#xA;checking for C/C++ restrict keyword... __restrict&#xA;checking for 3rd party libraries path... not found&#xA;checking for an Android system... no&#xA;checking how to print strings... printf&#xA;checking for a sed that does not truncate output... /bin/sed&#xA;checking for fgrep... /bin/grep -F&#xA;checking for ld used by gcc -std=gnu99... /usr/bin/ld&#xA;checking if the linker (/usr/bin/ld) is GNU ld... yes&#xA;checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B&#xA;checking the name lister (/usr/bin/nm -B) interface... BSD nm&#xA;checking whether ln -s works... yes&#xA;checking the maximum length of command line arguments... 1572864&#xA;checking whether the shell understands some XSI constructs... yes&#xA;checking whether the shell understands &quot;+=&quot;... yes&#xA;checking how to convert x86_64-unknown-linux-gnu file names to x86_64-unknown-linux-gnu format... func_convert_file_noop&#xA;checking how to convert x86_64-unknown-linux-gnu file names to toolchain format... func_convert_file_noop&#xA;checking for /usr/bin/ld option to reload object files... -r&#xA;checking for objdump... objdump&#xA;checking how to recognize dependent libraries... (cached) pass_all&#xA;checking for dlltool... no&#xA;checking how to associate runtime and link libraries... printf %s\n&#xA;checking for ar... ar&#xA;checking for archiver @FILE support... @&#xA;checking for strip... strip&#xA;checking for ranlib... ranlib&#xA;checking command to parse /usr/bin/nm -B output from gcc -std=gnu99 object... ok&#xA;checking for sysroot... no&#xA;checking for mt... mt&#xA;checking if mt is a manifest tool... no&#xA;checking for dlfcn.h... yes&#xA;checking for objdir... .libs&#xA;checking if gcc -std=gnu99 supports -fno-rtti -fno-exceptions... no&#xA;checking for gcc -std=gnu99 option to produce PIC... -fPIC -DPIC&#xA;checking if gcc -std=gnu99 PIC flag -fPIC -DPIC works... yes&#xA;checking if gcc -std=gnu99 static flag -static works... yes&#xA;checking if gcc -std=gnu99 supports -c -o file.o... yes&#xA;checking if gcc -std=gnu99 supports -c -o file.o... (cached) yes&#xA;checking whether the gcc -std=gnu99 linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes&#xA;checking whether -lc should be explicitly linked in... no&#xA;checking dynamic linker characteristics... GNU/Linux ld.so&#xA;checking how to hardcode library paths into programs... immediate&#xA;checking for shl_load... no&#xA;checking for shl_load in -ldld... no&#xA;checking for dlopen... no&#xA;checking for dlopen in -ldl... yes&#xA;checking whether a program can dlopen itself... yes&#xA;checking whether a statically linked program can dlopen itself... no&#xA;checking whether stripping libraries is possible... yes&#xA;checking if libtool supports shared libraries... yes&#xA;checking whether to build shared libraries... yes&#xA;checking whether to build static libraries... no&#xA;checking for windres... no&#xA;checking whether NLS is requested... yes&#xA;checking for msgfmt... /usr/bin/msgfmt&#xA;checking for gmsgfmt... /usr/bin/msgfmt&#xA;checking for xgettext... /usr/bin/xgettext&#xA;checking for msgmerge... /usr/bin/msgmerge&#xA;checking for ld used by GCC... /usr/bin/ld -m elf_x86_64&#xA;checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes&#xA;checking for shared library run path origin... done&#xA;checking for CFPreferencesCopyAppValue... no&#xA;checking for CFLocaleCopyCurrent... no&#xA;checking for GNU gettext in libc... yes&#xA;checking whether to use NLS... yes&#xA;checking where the gettext function comes from... libc&#xA;checking for iconv... yes&#xA;checking for working iconv... yes&#xA;checking for iconv declaration... &#xA;         extern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);&#xA;checking for buggy GNU/libc versions... not present&#xA;checking for shared objects suffix... .so&#xA;checking whether nanosleep is declared... yes&#xA;checking for daemon... yes&#xA;checking for fcntl... yes&#xA;checking for fstatvfs... yes&#xA;checking for fork... yes&#xA;checking for getenv... yes&#xA;checking for getpwuid_r... yes&#xA;checking for if_nameindex... yes&#xA;checking for if_nametoindex... yes&#xA;checking for isatty... yes&#xA;checking for lstat... yes&#xA;checking for memalign... yes&#xA;checking for mmap... yes&#xA;checking for openat... yes&#xA;checking for pread... yes&#xA;checking for posix_fadvise... yes&#xA;checking for posix_madvise... yes&#xA;checking for setlocale... yes&#xA;checking for stricmp... no&#xA;checking for strnicmp... no&#xA;checking for strptime... yes&#xA;checking for uselocale... yes&#xA;checking for atof... yes&#xA;checking for atoll... yes&#xA;checking for dirfd... yes&#xA;checking for fdopendir... yes&#xA;checking for flockfile... yes&#xA;checking for fsync... yes&#xA;checking for getdelim... yes&#xA;checking for getpid... yes&#xA;checking for gmtime_r... yes&#xA;checking for inet_pton... yes&#xA;checking for lldiv... yes&#xA;checking for localtime_r... yes&#xA;checking for nrand48... yes&#xA;checking for rewind... yes&#xA;checking for setenv... yes&#xA;checking for strcasecmp... yes&#xA;checking for strcasestr... yes&#xA;checking for strdup... yes&#xA;checking for strlcpy... no&#xA;checking for strncasecmp... yes&#xA;checking for strndup... yes&#xA;checking for strnlen... yes&#xA;checking for strsep... yes&#xA;checking for strtof... yes&#xA;checking for strtok_r... yes&#xA;checking for strtoll... yes&#xA;checking for swab... yes&#xA;checking for tdestroy... yes&#xA;checking for fdatasync... yes&#xA;checking for working strcoll... yes&#xA;checking for accept4... yes&#xA;checking for pipe2... yes&#xA;checking for eventfd... yes&#xA;checking for vmsplice... yes&#xA;checking for sched_getaffinity... yes&#xA;checking for library containing poll... none required&#xA;checking for struct pollfd... yes&#xA;checking for library containing connect... none required&#xA;checking for socklen_t in sys/socket.h... yes&#xA;checking for struct sockaddr_storage... yes&#xA;checking for library containing getaddrinfo... none required&#xA;checking for getopt_long... yes&#xA;checking for cos in -lm... yes&#xA;checking for lrintf in -lm... yes&#xA;checking for library containing dlopen... -ldl&#xA;checking for main in -lpthread... yes&#xA;checking for clock_nanosleep in -lrt... yes&#xA;checking for strncasecmp in strings.h... yes&#xA;checking search.h usability... yes&#xA;checking search.h presence... yes&#xA;checking for search.h... yes&#xA;checking getopt.h usability... yes&#xA;checking getopt.h presence... yes&#xA;checking for getopt.h... yes&#xA;checking for strings.h... (cached) yes&#xA;checking locale.h usability... yes&#xA;checking locale.h presence... yes&#xA;checking for locale.h... yes&#xA;checking xlocale.h usability... yes&#xA;checking xlocale.h presence... yes&#xA;checking for xlocale.h... yes&#xA;checking fcntl.h usability... yes&#xA;checking fcntl.h presence... yes&#xA;checking for fcntl.h... yes&#xA;checking sys/time.h usability... yes&#xA;checking sys/time.h presence... yes&#xA;checking for sys/time.h... yes&#xA;checking sys/ioctl.h usability... yes&#xA;checking sys/ioctl.h presence... yes&#xA;checking for sys/ioctl.h... yes&#xA;checking for sys/stat.h... (cached) yes&#xA;checking arpa/inet.h usability... yes&#xA;checking arpa/inet.h presence... yes&#xA;checking for arpa/inet.h... yes&#xA;checking netinet/udplite.h usability... no&#xA;checking netinet/udplite.h presence... no&#xA;checking for netinet/udplite.h... no&#xA;checking sys/eventfd.h usability... yes&#xA;checking sys/eventfd.h presence... yes&#xA;checking for sys/eventfd.h... yes&#xA;checking for net/if.h... yes&#xA;checking for sys/mount.h... yes&#xA;checking machine/param.h usability... no&#xA;checking machine/param.h presence... no&#xA;checking for machine/param.h... no&#xA;checking sys/shm.h usability... yes&#xA;checking sys/shm.h presence... yes&#xA;checking for sys/shm.h... yes&#xA;checking linux/version.h usability... yes&#xA;checking linux/version.h presence... yes&#xA;checking for linux/version.h... yes&#xA;checking linux/dccp.h usability... yes&#xA;checking linux/dccp.h presence... yes&#xA;checking for linux/dccp.h... yes&#xA;checking scsi/scsi.h usability... yes&#xA;checking scsi/scsi.h presence... yes&#xA;checking for scsi/scsi.h... yes&#xA;checking linux/magic.h usability... yes&#xA;checking linux/magic.h presence... yes&#xA;checking for linux/magic.h... yes&#xA;checking syslog.h usability... yes&#xA;checking syslog.h presence... yes&#xA;checking for syslog.h... yes&#xA;checking mntent.h usability... yes&#xA;checking mntent.h presence... yes&#xA;checking for mntent.h... yes&#xA;checking for ssize_t... yes&#xA;checking pthread.h usability... yes&#xA;checking pthread.h presence... yes&#xA;checking for pthread.h... yes&#xA;checking for pkg-config... /usr/bin/pkg-config&#xA;checking pkg-config is at least version 0.9.0... yes&#xA;checking zlib.h usability... no&#xA;checking zlib.h presence... no&#xA;checking for zlib.h... no&#xA;checking for DBUS... no&#xA;configure: error: No package 'dbus-1' found.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;seems like there is a problem because now &lt;code&gt;make&lt;/code&gt; doesnt work&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make: *** No targets specified and no makefile found.  Stop.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I fix this issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update1 : After ignoring lots of errors with this long command &lt;code&gt;vlc-2.0.8$ ./configure --disable-lua --disable-mad --disable-avcodec --disable-swscale --disable-postproc  --disable-a52&lt;/code&gt; I still receive this error  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configure: error: Package requirements (xcb &amp;gt;= 1.6) were not met:&#xA;&#xA;No package 'xcb' found&#xA;&#xA;Consider adjusting the PKG_CONFIG_PATH environment variable if you&#xA;installed software in a non-standard prefix.&#xA;&#xA;Alternatively, you may set the environment variables XCB_CFLAGS&#xA;and XCB_LIBS to avoid the need to call pkg-config.&#xA;See the pkg-config man page for more details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update2: Also installed these packages &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libjack-jackd2-dev&#xA;sudo apt-get build-dep vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I still receive this error :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;configure: error: Could not find lua. Lua is needed for some interfaces (rc, telnet, http) as well as many other custom scripts. Use --disable-lua to ignore this error.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update3: according to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/1239/sneetsher&quot;&gt;sneetsher&lt;/a&gt; answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install liblua5.1-0-dev&#xA;./configure --disable-lua&#xA;./compile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Compiler leaves lots of warnings. I just copy some parts here because of limitation with num of characters in each post  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;MAKE     : compat&#xA; COMPILE : libtool  --tag=CC   --mode=compile gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I..   -I../include -I../include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT strlcpy.lo -MD -MP -MF .deps/strlcpy.Tpo -c -o strlcpy.lo&#xA;MAKE     : doc&#xA;MAKE     : po&#xA;MAKE     : share&#xA;desktop-file-validate tmp-vlc.desktop&#xA;           sed -e 's,\@vlcdatadir\@,/usr/local/share/vlc,g' &amp;lt; &quot;osdmenu/default.cfg.in&quot; &amp;gt; osdmenu/default.cfg&#xA;MAKE     : src&#xA;if ! git \&#xA;            --git-dir=&quot;../.git/&quot; describe \&#xA;            --tags --long --match '?.*.*' --always; then \&#xA;    fi &amp;gt; revision.tmp&#xA;fatal: Not a git repository: '../.git/'&#xA;if diff revision.tmp ./revision.txt &amp;gt;/dev/null 2&amp;gt;&amp;amp;1; then \&#xA;    else \&#xA;        mv -f -- revision.tmp ./revision.txt; \&#xA;    fi&#xA;MAKE     : .&#xA; COMPILE : libvlc.lo&#xA; COMPILE : libvlc.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;libvlc.c: In function 'vlc_hold':&#xA;WARNING : libvlc.c:126: 15:  variable 'refs' set but not used [-Wunused-but-set-variable]&#xA;     uintptr_t refs;&#xA;               ^&#xA; COMPILE : libvlc-module.lo&#xA; COMPILE : libvlc-module.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;depbase=`echo missing.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT missing.lo -MD -MP -MF $depbase.Tpo -c -o missing.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;depbase=`echo version.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT version.lo -MD -MP -MF $depbase.Tpo -c -o version.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;depbase=`echo interface/dialog.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT interface/dialog.lo -MD -MP -MF $depbase.Tpo -c -o interface/dialog.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;depbase=`echo interface/interface.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT interface/interface.lo -MD -MP -MF $depbase.Tpo -c -o interface/interface.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;interface/interface.c: In function 'intf_DestroyAll':&#xA;WARNING : interface/interface.c:194: 9:  'vlc_object_kill' is deprecated (declared at ../include/vlc_objects.h:76) [-Wdeprecated-declarations]&#xA;         vlc_object_kill( p_intf );&#xA;         ^&#xA;depbase=`echo playlist/art.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT playlist/art.lo -MD -MP -MF $depbase.Tpo -c -o playlist/art.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;depbase=`echo playlist/thread.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT playlist/thread.lo -MD -MP -MF $depbase.Tpo -c -o playlist/thread.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;playlist/thread.c: In function 'playlist_Deactivate':&#xA;WARNING : playlist/thread.c:78: 5:  'vlc_object_kill' is deprecated (declared at ../include/vlc_objects.h:76) [-Wdeprecated-declarations]&#xA;     vlc_object_kill( p_playlist );&#xA;     ^&#xA;playlist/thread.c: In function 'LoopInput':&#xA;WARNING : playlist/thread.c:467: 5:  'vlc_object_alive' is deprecated (declared at ../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;     if( ( p_sys-&amp;gt;request.b_request || !vlc_object_alive( p_playlist ) ) &amp;amp;&amp;amp; !p_input-&amp;gt;b_die )&#xA;     ^&#xA;playlist/thread.c: In function 'LoopRequest':&#xA;WARNING : playlist/thread.c:525: 5:  'vlc_object_alive' is deprecated (declared at ../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;     if( i_status == PLAYLIST_STOPPED || !vlc_object_alive( p_playlist ) )&#xA;     ^&#xA;WARNING : playlist/thread.c:543: 13:  'vlc_object_alive' is deprecated (declared at ../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;             if( vlc_object_alive( p_playlist ) )&#xA;             ^&#xA;playlist/thread.c: In function 'Thread':&#xA;WARNING : playlist/thread.c:577: 5:  'vlc_object_alive' is deprecated (declared at ../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;     while( vlc_object_alive( p_playlist ) || p_sys-&amp;gt;p_input )&#xA;     ^&#xA;depbase=`echo playlist/control.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT playlist/control.lo -MD -MP -MF $depbase.Tpo -c -o playlist/control.lo&#xA;    mv -f $depbase.Tpo $depbase.Plo&#xA;playlist/control.c: In function 'PlaylistVAControl':&#xA;WARNING : playlist/control.c:110: 5:  'vlc_object_alive' is deprecated (declared at ../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;     if( !vlc_object_alive( p_playlist ) )&#xA;     ^&#xA;depbase=`echo playlist/engine.lo | sed 's|[^/]*$|.deps/&amp;amp;|;s|\.lo$||'`;\&#xA; COMPILE : lib/x86_64-linux-gnu/dbus-1.0/include   -g -O2 -Wall -Wextra -Wsign-compare -Wundef -Wpointer-arith -Wbad-function-cast -Wwrite-strings -Wmissing-prototypes -Wvolatile-register-var -Werror-implicit-function-declaration -pipe -fvisibility=hidden  -ffast-math -funroll-loops -fomit-frame-pointer -mtune=athlon64 -MT playlist/engine.lo -MD -MP -MF $depbase.Tpo -c -o playlist/engine.lo&#xA;.&#xA;.&#xA;.&#xA;In file included from ../../include/vlc_common.h:491:0,&#xA;                 from idummy.c:32:&#xA;idummy.c: In function 'DemuxHold':&#xA;WARNING : ../../include/vlc_threads.h:326: 25:  call to 'harmful_delay.constprop.1' declared with attribute warning: use proper event handling instead of short delay [enabled by default]&#xA; #define msleep(d) msleep(check_delay(d))&#xA;                         ^&#xA;idummy.c:60:5: note: in expansion of macro 'msleep'&#xA;     msleep( 10000 ); /* FIXME!!! */&#xA;     ^&#xA;In function 'DemuxPause.part.0',&#xA;    inlined from 'DemuxPause':&#xA;WARNING : ../../include/vlc_threads.h:326: 25:  call to 'harmful_delay.constprop.1' declared with attribute warning: use proper event handling instead of short delay [enabled by default]&#xA; #define msleep(d) msleep(check_delay(d))&#xA;                         ^&#xA;idummy.c:78:5: note: in expansion of macro 'msleep'&#xA;     msleep( 10000 ); /* FIXME!!! */&#xA;     ^&#xA; COMPILE : libaccess_udp_plugin_la-udp.lo&#xA; COMPILE : libaccess_tcp_plugin_la-tcp.lo&#xA; COMPILE : libaccess_http_plugin_la-http.lo&#xA;http.c: In function 'OpenWithCookies':&#xA;WARNING : http.c:517: 13:  'vlc_object_alive' is deprecated (declared at ../../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;             if( !vlc_object_alive (p_access) || Connect( p_access, 0 ) )&#xA;             ^&#xA;http.c: In function 'ReadData':&#xA;WARNING : http.c:779: 19:  comparison between signed and unsigned integer expressions [-Wsign-compare]&#xA;         if( i_len &amp;gt; p_sys-&amp;gt;i_chunk )&#xA;                   ^&#xA;http.c: In function 'Read':&#xA;WARNING : http.c:836: 19:  comparison between signed and unsigned integer expressions [-Wsign-compare]&#xA;         if( i_len &amp;gt; i_next )&#xA;                   ^&#xA;WARNING : http.c:859: 9:  'vlc_object_alive' is deprecated (declared at ../../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;         if( p_sys-&amp;gt;b_reconnect &amp;amp;&amp;amp; vlc_object_alive( p_access ) )&#xA;         ^&#xA;http.c: In function 'Connect':&#xA;WARNING : http.c:1209: 17:  'vlc_object_alive' is deprecated (declared at ../../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;                 if( !vlc_object_alive (p_access) || p_sys-&amp;gt;b_error )&#xA;                 ^&#xA;http.c: In function 'Request':&#xA;WARNING : http.c:1382: 9:  'vlc_object_alive' is deprecated (declared at ../../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;         if( !vlc_object_alive (p_access) || p_sys-&amp;gt;b_error )&#xA;         ^&#xA; COMPILE : libaccess_ftp_plugin_la-ftp.lo&#xA; COMPILE : libaccess_imem_plugin_la-imem.lo&#xA; COMPILE : libaccess_attachment_plugin_la-attachment.lo&#xA; COMPILE : libsdp_plugin_la-sdp.lo&#xA; COMPILE : libaccess_rar_plugin_la-rar.lo&#xA; COMPILE : libaccess_rar_plugin_la-access.lo&#xA; COMPILE : libstream_filter_rar_plugin_la-rar.lo&#xA; COMPILE : libstream_filter_rar_plugin_la-stream.lo&#xA; COMPILE : libaccess_vdr_plugin_la-vdr.lo&#xA; COMPILE : libaccess_alsa_plugin_la-alsa.lo&#xA; COMPILE : libpulsesrc_plugin_la-vlcpulse.lo&#xA;In file included from ../audio_output/vlcpulse.c:24:0:&#xA;WARNING : ../../config.h:750: 0:  &quot;_REENTRANT&quot; redefined [enabled by default]&#xA; #define _REENTRANT /**/&#xA; ^&#xA;&amp;lt;command-line&amp;gt;:0:0: note: this is the location of the previous definition&#xA; COMPILE : libpulsesrc_plugin_la-pulse.lo&#xA;In file included from pulse.c:24:0:&#xA;WARNING : ../../config.h:750: 0:  &quot;_REENTRANT&quot; redefined [enabled by default]&#xA; #define _REENTRANT /**/&#xA; ^&#xA;&amp;lt;command-line&amp;gt;:0:0: note: this is the location of the previous definition&#xA; COMPILE : libaccess_shm_plugin_la-shm.lo&#xA; COMPILE : libv4l2_plugin_la-video.lo&#xA;v4l2/video.c: In function 'InitVideo':&#xA;WARNING : v4l2/video.c:930: 13:  format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'v4l2_std_id' [-Wformat=]&#xA;             msg_Err( p_obj, &quot;cannot set standard 0x%&quot;PRIx64&quot;: %m&quot;, std );&#xA;             ^&#xA;WARNING : v4l2/video.c:933: 9:  format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'v4l2_std_id' [-Wformat=]&#xA;         msg_Dbg( p_obj, &quot;standard set to 0x%&quot;PRIx64&quot;:&quot;, std );&#xA;         ^&#xA;WARNING : v4l2/video.c:1434: 43:  'f_fps' may be used uninitialized in this function [-Wmaybe-uninitialized]&#xA;         es_fmt.video.i_frame_rate = lround(f_fps * 1000000.);&#xA;                                           ^&#xA;v4l2/video.c: In function 'GrabVideo':&#xA;WARNING : v4l2/video.c:556: 14:  'p_block' may be used uninitialized in this function [-Wmaybe-uninitialized]&#xA;     block_t *p_block;&#xA;              ^&#xA; COMPILE : libv4l2_plugin_la-demux.lo&#xA; COMPILE : libv4l2_plugin_la-access.lo&#xA;v4l2/access.c: In function 'AccessReadStream':&#xA;WARNING : v4l2/access.c:119: 9:  'vlc_object_alive' is deprecated (declared at ../../include/vlc_objects.h:81) [-Wdeprecated-declarations]&#xA;         if( !vlc_object_alive(access) )&#xA;         ^&#xA; COMPILE : libv4l2_plugin_la-controls.lo&#xA;v4l2/controls.c: In function 'ControlSetCallback':&#xA;WARNING : v4l2/controls.c:172: 8:  'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]&#xA;     if (ret)&#xA;        ^&#xA; COMPILE : libxcb_screen_plugin_la-xcb.lo&#xA; COMPILE : libdtv_plugin_la-access.lo&#xA; COMPILE : libdtv_plugin_la-linux.lo&#xA; COMPILE : libdtv_plugin_la-en50221.lo&#xA;dtv/en50221.c: In function 'en50221_SetCAPMT':&#xA;ERROR   : dtv/en50221.c:2234: 17:  implicit declaration of function 'dvbpsi_DeletePMT' [-Werror=implicit-function-declaration]&#xA;                 dvbpsi_DeletePMT( p_pmt );&#xA;                 ^&#xA;dtv/en50221.c: At top level:&#xA;WARNING : dtv/en50221.c:2288: 12:  'en50221_OpenMMI' defined but not used [-Wunused-function]&#xA; static int en50221_OpenMMI( cam_t * p_cam, unsigned i_slot )&#xA;            ^&#xA;WARNING : dtv/en50221.c:2328: 12:  'en50221_CloseMMI' defined but not used [-Wunused-function]&#xA; static int en50221_CloseMMI( cam_t * p_cam, unsigned i_slot )&#xA;            ^&#xA;WARNING : dtv/en50221.c:2356: 15:  'en50221_GetMMIObject' defined but not used [-Wunused-function]&#xA; static mmi_t *en50221_GetMMIObject( cam_t * p_cam, unsigned i_slot )&#xA;               ^&#xA;WARNING : dtv/en50221.c:2381: 13:  'en50221_SendMMIObject' defined but not used [-Wunused-function]&#xA; static void en50221_SendMMIObject( cam_t * p_cam, unsigned i_slot,&#xA;             ^&#xA;cc1: some warnings being treated as errors&#xA;make: *** [all] Error 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3830" LastEditorUserId="3830" LastEditDate="2016-01-24T10:04:11.593" LastActivityDate="2016-04-27T02:55:02.027" Title="How to install VLC 2.0.8" Tags="|vlc|subtitles|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4100" PostTypeId="1" CreationDate="2016-01-22T23:08:01.687" Score="0" ViewCount="105" Body="&lt;p&gt;I am using elementary OS freya 0.3.2 64bit. When trying to upgrade wine&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wine is already the newest version&#xA;0 to upgrade, 0 to newly install, 0 to remove and 12 not to upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The Wine version is 1.6.2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am pretty sure wine1.8 is already out and i can even see it in my software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Zfvwd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zfvwd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1153" LastEditorUserId="3757" LastEditDate="2016-05-06T14:23:50.777" LastActivityDate="2016-05-06T14:23:50.777" Title="Wine unable to upgrade" Tags="|updates|wine|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4101" PostTypeId="2" ParentId="4099" CreationDate="2016-01-23T03:07:26.857" Score="1" Body="&lt;p&gt;Try running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -y install liba52-0.7.4-dev libaa1-dev libasound2-dev libass-dev \&#xA;libavahi-client-dev libcaca-dev libcairo2-dev libcddb2-dev libcdio-dev libdca-dev \&#xA;libdirac-dev libdvbpsi-dev libdvdnav-dev libdvdread-dev libebml-dev libfaad-dev \&#xA;libflac-dev libfluidsynth-dev libfreetype6-dev libfribidi-dev libgcrypt11-dev \&#xA;libggi2-dev libgl1-mesa-dev libglib2.0-0 libgnomevfs2-dev libgnutls-dev libhal-dev \&#xA;libid3tag0-dev libjack-jackd2-dev libkate-dev liblircclient-dev liblua5.1-0-dev \&#xA;libmad0-dev libmatroska-dev libmodplug-dev libmpcdec-dev libmpeg2-4-dev libmtp-dev \&#xA;libncursesw5-dev libnotify-dev libogg-dev liboggkate-dev libpango1.0-dev libpng12-dev \&#xA;libprojectm-dev libprojectm-qt-dev libproxy-dev libpulse-dev libqt4-dev libraw1394-dev \&#xA;librsvg2-dev libschroedinger-dev libsdl-image1.2-dev libsdl1.2-dev libshout3-dev \&#xA;libsmbclient-dev libspeex-dev libsqlite3-dev libsvga1-dev libsysfs-dev libtag1-dev \&#xA;libtar-dev libgme-dev libtheora-dev libtool libtwolame-dev libudev-dev libupnp-dev \&#xA;libv4l-dev libva-dev libvcdinfo-dev libvorbis-dev libvpx-dev libx11-dev libx11-xcb-dev \&#xA;libxcb-composite0-dev libxcb-keysyms1-dev libxcb-randr0-dev libxcb-shm0-dev \&#xA;libxcb-xv0-dev libxcb-xvmc0-dev libxcb1-dev libxext-dev libxml2-dev libxpm-dev \&#xA;libxt-dev libxv-dev libzvbi-dev lua5.1 qt4-qtconfig libspeexdsp-dev libsamplerate0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to install all the libraries&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-03-28T02:07:39.533" LastActivityDate="2016-03-28T02:07:39.533" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="4103" PostTypeId="1" CreationDate="2016-01-23T10:54:55.163" Score="2" ViewCount="765" Body="&lt;p&gt;As it is written in other post, To make Geary work,it is necessary to change gmail setting to less secure connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any secure email notifier?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;searching in Software Center results in some applications, however I am not sure which one is secure and works fine.&lt;/p&gt;&#xA;" OwnerUserId="3830" LastActivityDate="2016-01-23T11:03:14.760" Title="Best Email notifier to replace standard Geary" Tags="|pantheon-mail|notifications|" AnswerCount="1" CommentCount="2" ClosedDate="2016-04-09T00:20:58.670" ContentLicense="CC BY-SA 3.0" />
  <row Id="4104" PostTypeId="2" ParentId="4103" CreationDate="2016-01-23T11:03:14.760" Score="1" Body="&lt;p&gt;You can have a look at Nylas N1: &lt;a href=&quot;https://www.nylas.com/n1&quot; rel=&quot;nofollow&quot;&gt;https://www.nylas.com/n1&lt;/a&gt;. Its free and is open source.&lt;/p&gt;&#xA;" OwnerUserId="218" LastActivityDate="2016-01-23T11:03:14.760" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4106" PostTypeId="1" AcceptedAnswerId="4107" CreationDate="2016-01-23T13:49:01.923" Score="3" ViewCount="370" Body="&lt;p&gt;Is it possible to connect to a server using the Public Key Authentication for SSH in Pantheon Files? If I select &quot;Connect to Server...&quot; and choose SSH as protocol it only offers me a username and password field.&lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2016-03-23T16:33:44.013" Title="PublicKey Authentication for SSH in Pantheon Files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4107" PostTypeId="2" ParentId="4106" CreationDate="2016-01-23T14:09:21.500" Score="2" Body="&lt;p&gt;I found the solution, it's possible by entering &lt;code&gt;&amp;lt;user&amp;gt;@&amp;lt;host&amp;gt;&lt;/code&gt; into the server field and the password for the private key into the password field.&lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2016-01-23T14:09:21.500" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4108" PostTypeId="2" ParentId="4098" CreationDate="2016-01-23T14:18:16.923" Score="1" Body="&lt;p&gt;How did you add those repositories? They do not exist (you can check the links in your browser). And I highly doubt that canonical offers packages for freya ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the trusty packages for the canonical and getdeb repositories. The launchpad repository hasn't been updated since 2013 so it doesn't provide any trusty packages.&lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2016-01-23T14:18:16.923" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4109" PostTypeId="2" ParentId="4097" CreationDate="2016-01-23T14:40:26.517" Score="0" Body="&lt;p&gt;The wallpapers are stored in &lt;code&gt;/usr/share/backgrounds&lt;/code&gt;. It's likely that this update didn't actually change or add wallpapers, but rather updated copyright information or stuff like that.&lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2016-01-23T14:40:26.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4110" PostTypeId="2" ParentId="4100" CreationDate="2016-01-23T14:53:40.467" Score="0" Body="&lt;p&gt;For me 1.6.2 is the up-to-date package in the repositories: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;me@my-host:~$ apt-cache madison wine&#xA;     wine | 1:1.6.2-0ubuntu4 | http://de.archive.ubuntu.com/ubuntu/ trusty/universe amd64 Packages&#xA;  wine1.6 | 1:1.6.2-0ubuntu4 | http://de.archive.ubuntu.com/ubuntu/ trusty/universe Sources&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Are you using the default repository for wine? Maybe this is a bug in the software center then.&lt;/p&gt;&#xA;" OwnerUserId="2660" LastActivityDate="2016-01-23T14:53:40.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4111" PostTypeId="1" AcceptedAnswerId="4120" CreationDate="2016-01-23T20:17:11.833" Score="0" ViewCount="998" Body="&lt;p&gt;I've searched around but haven't found someone with quite my issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Windows and have so far used Rufus to burn the iso to an external USB drive, and boot into it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I now want to do is to install Elementary OS onto the USB drive. However, when I boot into the OS and try to install, I only get dev/sda from 1 to 6.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When opening the terminal and running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo fdisk -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I see that sda is my internal drive, and find that the USB is dev/sdb. My problem is that the sdb volume does not show up in the list of partitions I can install onto.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there another way I can boot and subsequently install from the USB?&lt;/p&gt;&#xA;" OwnerUserId="3869" LastActivityDate="2016-02-29T17:54:08.677" Title="Install using USB, to USB - System does not display USB in list of volumes" Tags="|system-installation|usb-drive|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4113" PostTypeId="1" CreationDate="2016-01-24T01:19:32.947" Score="1" ViewCount="1383" Body="&lt;p&gt;I'm rather new to *nix and have played a little with Ubuntu, Mint and now Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm doing a mistake but I don't understand where.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm mounting a network share via&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -t cifs //xxx.xxx.xxx.xxx/networkshare /mnt/local -o user=user,password=pass,uid=xxx,gid=xxx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the script is executable,&#xA;if I run the script in terminal all is ok,&#xA;it asks the password for root&#xA;and mount the share&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but I would like it to be mounted automatically&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to put the command into &lt;code&gt;/etc/rc.local&lt;/code&gt;&#xA;so the &lt;code&gt;#!/bin/bash&lt;/code&gt; above it and the exit 0 below it are already there&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to put the command into Applications -&gt; Startup Commands&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to create a file.desktop into &lt;code&gt;/.local/share/applications&lt;/code&gt;&#xA;(so, at least, it is easy to run)&#xA;as Exec I tried both&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/path/filename.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=sh /path/filename.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but none is working, none of the methods is asking me the root password&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Surely I'm doing something wrong,&#xA;I did a google search but I've not been able to find some guide.&#xA;Can you drive me the right way ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TIA&lt;/p&gt;&#xA;" OwnerUserId="3873" LastEditorUserId="3757" LastEditDate="2016-05-06T08:59:05.647" LastActivityDate="2017-05-15T08:37:32.393" Title="how to automatically run a script as root to mount a network share" Tags="|mount|sudo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4114" PostTypeId="2" ParentId="4100" CreationDate="2016-01-24T02:59:21.240" Score="1" Body="&lt;p&gt;The elementary OS is a distro based on a &quot;long term support&quot; (LTS) version of Ubuntu. This LTS versions only have packages with a stable status and strongly tested before the release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, the version of wine at the moment of the release of current Ubuntu LTS, back in April 2014, was wine 1.6. The wine 1.8 was only released in December 2015, so it's not on Ubuntu yet and, therefore, not in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is so that the distro has a more stable set of packages, at cost of fewer feature updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to use the wine 1.8, or even the development version 1.9, you should install it via other sources, like a PPA or building it yourself.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2016-01-24T02:59:21.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4117" PostTypeId="1" CreationDate="2016-01-24T12:02:45.097" Score="1" ViewCount="170" Body="&lt;p&gt;I installed VirtualBox on my PC a few days ago just to tinker around with it and now the whole operating system has changed how it looks. The dock looks different, some of the icons are missing, the Software Center has disappeared. I don't know what happened. I use this OS mainly for Internet browsing and some light coding. The OS was working perfectly fine a few days ago but after installing VirtualBox and restarting, it has all changed. When I installed elementary OS, it was on version 0.3.2 and it still says the same now so I don't know why it looks completely different.&#xA;I hope the image might help. Thanks! &lt;a href=&quot;https://i.stack.imgur.com/x0f6e.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x0f6e.jpg&quot; alt=&quot;Desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3875" LastEditorUserId="5565" LastEditDate="2016-10-04T16:37:07.770" LastActivityDate="2016-10-04T16:37:07.770" Title="VirtualBox changed how elementary OS looks" Tags="|themes|virtualbox|" AnswerCount="0" CommentCount="6" ClosedDate="2016-10-05T19:41:38.980" ContentLicense="CC BY-SA 3.0" />
  <row Id="4118" PostTypeId="2" ParentId="3953" CreationDate="2016-01-24T13:43:06.030" Score="2" Body="&lt;p&gt;I've read that installing rEFIt or rEFInd is the 'standard' procedure. However, my OSX wasn't booting even after reinstalling it. Therefore, I thought in bringing it back to life with Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, during the only time that the installer started I did format the whole drive, so at this point I only have a ext4 partition and a SWAP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I forgot to mention that I'm installing it from a USB because the superdrive is dead :(&lt;/p&gt;&#xA;" OwnerUserId="3751" LastActivityDate="2016-01-24T13:43:06.030" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4120" PostTypeId="2" ParentId="4111" CreationDate="2016-01-24T19:17:50.253" Score="1" Body="&lt;p&gt;You can't install &lt;em&gt;elementary OS&lt;/em&gt; (and any linux OS) in the same USB drive you boot the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install from DVD to USB or from USB to another USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to create a bootable persistent USB drive with &lt;em&gt;elementary OS&lt;/em&gt;, you can see the next entry in my blog:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bitseater.blogspot.com.es/2016/01/create-bootable-and-persistent-usb.html&quot; rel=&quot;nofollow&quot;&gt;Apuntes sobre elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information, you can visit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/LiveUsbPendrivePersistent&quot; rel=&quot;nofollow&quot;&gt;Ubuntu wiki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#choose-operating-system&quot; rel=&quot;nofollow&quot;&gt;Download and install elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="34" LastEditDate="2016-02-29T17:54:08.677" LastActivityDate="2016-02-29T17:54:08.677" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4122" PostTypeId="1" AcceptedAnswerId="8435" CreationDate="2016-01-25T10:42:25.633" Score="8" ViewCount="897" Body="&lt;p&gt;Due to some UI issues with the normal theme (see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2744&quot;&gt;this question&lt;/a&gt;) I switched to the dark theme by setting &lt;code&gt;gtk-application-prefer-dark-theme=1&lt;/code&gt; in &lt;code&gt;~/.config/gtk-3.0/settings.ini&lt;/code&gt;. In general this works just fine, but there are some minor glitches like the selection color for multiple items.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question is: &lt;strong&gt;Is the dark theme officially supported and is it worth reporting bugs related to it?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="81" LastActivityDate="2016-10-02T04:02:38.023" Title="Is the dark theme officially supported?" Tags="|release-freya|themes|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4123" PostTypeId="1" AcceptedAnswerId="8471" CreationDate="2016-01-25T16:07:08.783" Score="1" ViewCount="60" Body="&lt;p&gt;I followed the instructions from &lt;a href=&quot;https://software.intel.com/en-us/blogs/2012/03/12/how-to-start-intel-hardware-assisted-virtualization-hypervisor-on-linux-to-speed-up-intel-android-x86-emulator&quot; rel=&quot;nofollow noreferrer&quot;&gt;Intel&lt;/a&gt; to to speed up the Android emulator on my laptop. When I got to the part &lt;em&gt;&quot;After the installation, you need to relogin so that your user account becomes an effective member of kvm and libvirtd user groups,&quot;&lt;/em&gt; I rebooted my laptop. However, once I got to the logon screen, the windows seemed different. Everything looks similar to the Windows 2000 look-and-feel and not like the default Elementary OS Luna look and feel. I uninstalled and purged everything the instructions told me to install, including their dependencies, and the environment still remains. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It wouldn't be such a big issue, except I can't click and drag programs, and there isn't any Close button on any of the program windows. Also, the programs open up in random portions of the screen, sometimes covering up the top toolbar or dock. How can I reset the GUI environment to the default?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some pics:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5GAnW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5GAnW.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8Rcks.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8Rcks.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/gdVr9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gdVr9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nJWyP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nJWyP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I apologize for the bad quality, but they had to be taken by camera instead of screenshot because opening the browser and navigating and typing would be difficult due to the random placement of the programs and inability to move the window.&lt;/p&gt;&#xA;" OwnerUserId="685" LastActivityDate="2016-10-03T17:57:43.923" Title="GUI environment ruined from attempting Hardware-assisted Virtualization" Tags="|settings|themes|desktop|window-management|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4125" PostTypeId="1" CreationDate="2016-01-25T20:30:35.830" Score="2" ViewCount="543" Body="&lt;p&gt;How can I install Elementary OS Freya 0.3.2 64Bit on mac mini 1.1 flashed to 2.1?&#xA;I have flashed mac mini 1.1 (to 2.1 EFI) with 4GB RAM, 128GB SSD, DVD-RW, upgraded CPU to 64bit (intel C2D t7200).&#xA;However I can not install 64bit Freya to it.&#xA;Is there a ISO image amd64+maclike ubuntu does, quote:&#xA;&quot;These disks have explicitly removed EFI bootable binaries forcing a machine to boot with BIOS compatibility.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help,&#xA;P.&lt;/p&gt;&#xA;" OwnerUserId="3886" LastActivityDate="2017-03-03T14:51:39.567" Title="How can I install Elementary OS Freya 3.2 64bit on mac mini 1.1 flashed to 2.1?" Tags="|release-freya|system-installation|boot|64-bit|macintosh|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4126" PostTypeId="1" CreationDate="2016-01-25T21:41:21.220" Score="1" ViewCount="1389" Body="&lt;p&gt;My boot is too small..should have made it larger initially.  So, I have rebooted the machine with the Elementary/USB drive.  Launched GPartition.  Unmounted the partitions on my HD.  But I can't seem to change the size of the partitions.  /dev/sda is 298.09 Gib...I would like to shrink it by 10 GB or so.  Then I will add those 10 GB to my boot volume. My boot volume is /dev/sda1 and is only 243 mib But I am unable to make it happen.  The partitions on the HD are definitely unmounted.  I cannot drag the bar to decrease the size of /dev/sda.  It does not move.  What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="3301" LastEditorDisplayName="user3515" LastEditDate="2016-01-30T12:22:12.647" LastActivityDate="2016-08-28T19:05:14.777" Title="changing sizes of boot partitions" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4127" PostTypeId="1" CreationDate="2016-01-25T22:29:46.663" Score="1" ViewCount="333" Body="&lt;p&gt;I just installed a samba server and my files are now accessable via samba. For any reason I can't see any thumbnails in the samba files. Is there an option to change the settings for Pantheon to display no local files with thumbnails?&lt;/p&gt;&#xA;" OwnerUserId="3887" LastEditorUserId="242" LastEditDate="2016-01-26T01:41:01.893" LastActivityDate="2016-02-26T12:50:21.010" Title="Pantheon show thumbnails samba server" Tags="|pantheon-files|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4128" PostTypeId="1" AcceptedAnswerId="4150" CreationDate="2016-01-26T03:23:12.067" Score="0" ViewCount="471" Body="&lt;p&gt;When I try to open Google Docs in Midori, I just get the &quot;loading&quot; spinner. The app never actually loads. I've tried switching to each of the built-in user agents, but with no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything that I can do to get Google Docs to work in Midori?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yMCtH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yMCtH.jpg&quot; alt=&quot;Here&amp;#39;s what I&amp;#39;m seeing.&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-27T14:41:24.640" Title="Google Docs in Midori" Tags="|midori|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4129" PostTypeId="1" CreationDate="2016-01-26T08:51:06.043" Score="2" ViewCount="127" Body="&lt;p&gt;I have a 5Ghz wifi network with an SSID of &lt;em&gt;'spark1_5'&lt;/em&gt;, but my desktop with ElementaryOS Freya (Kernel 3.19) does not see it. &lt;em&gt;spark1_5&lt;/em&gt; is on channel 132 of the 5Ghz spectrum. Upon running &lt;em&gt;iwlist wlan0 freq&lt;/em&gt;, it does not list channel 132 as a supported channel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then downloaded and booted up a live Ubuntu 15.10 image and I can see my 5Ghz SSID &lt;em&gt;spark1_5&lt;/em&gt; and connect to it. Running the &lt;em&gt;iwlist wlan0 freq&lt;/em&gt; command now lists channel 132 as a supported channel. I also booted up a copy of Windows 10 to see if it was my card or my Access Point. Windows 10 saw the &lt;em&gt;spark1_5&lt;/em&gt; SSID and connected to it easily as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So is there an outdated version of ath9k in Freya? Why would Ubuntu 15.10 and Windows 10 allow my card to see channel 132 where Freya does not?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a total noob at linux, so any input would be appreciated! Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3888" LastEditorUserId="3757" LastEditDate="2016-05-06T08:52:46.050" LastActivityDate="2016-05-06T08:52:46.050" Title="Wireless issues Freya vs (Ubuntu &amp; Windows)" Tags="|wifi|networking|drivers|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-28T18:58:14.830" ContentLicense="CC BY-SA 3.0" />
  <row Id="4131" PostTypeId="1" AcceptedAnswerId="4132" CreationDate="2016-01-26T17:00:41.347" Score="1" ViewCount="2253" Body="&lt;p&gt;I created a .desktop file to launch Chrome in a specific profile. Here is the code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=Chrome School&#xA;Comment=Open Chrome in my school account&#xA;Exec=google-chrome --profile-directory=&quot;Profile 1&quot;&#xA;Icon=/home/coolo/Pictures/ChromeGold&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Internet;Application;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It works after making it executable, but the icon won't show.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/bLul5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bLul5.png&quot; alt=&quot;Icon Missing&quot;&gt;&lt;/a&gt; &#xA;How do I fix this and make the icon show?&lt;/p&gt;&#xA;" OwnerDisplayName="user3515" LastActivityDate="2019-01-29T11:06:36.190" Title="Icon for .desktop file not showing" Tags="|release-freya|icons|app-shortcuts|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4132" PostTypeId="2" ParentId="4131" CreationDate="2016-01-26T18:24:36.570" Score="1" Body="&lt;p&gt;Try including the file extension in the icon name. For example, if it's a PNG file, change the code to &lt;code&gt;Icon=/home/coolo/Pictures/ChromeGold.png&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-26T18:24:36.570" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4133" PostTypeId="1" AcceptedAnswerId="4201" CreationDate="2016-01-26T18:40:06.530" Score="3" ViewCount="1403" Body="&lt;p&gt;I have just installed Freya. On the fresh boot it always finds my WiFi and connects to it. But, after some time it drops. Then, it never connects to the connection again until restarting the laptop.&#xA;I saw 3-4 bugs relating to the same issue on the bug-tracker.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the problem here? I love elementary OS but without internet I can't do anything. Does anyone have any solution to this? I have already tried &lt;a href=&quot;http://m.webupd8.org/2013/01/fix-wireless-or-wired-network-not.html?m=1&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3898" LastEditorUserId="34" LastEditDate="2016-01-27T19:16:58.827" LastActivityDate="2016-09-19T02:16:49.183" Title="WiFi connection dropping" Tags="|release-freya|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4135" PostTypeId="2" ParentId="3658" CreationDate="2016-01-26T19:56:53.573" Score="-1" Body="&lt;p&gt;I cannot say much from the theory point of view. My knowledge of the linux kernel is quite limited, but I use elementary Freya since beta with a Samsung 840Pro and have never ever experienced any problems. Cannot guarantee it is safe, but there is at least positive evidence from my example.&lt;/p&gt;&#xA;" OwnerUserId="3059" LastActivityDate="2016-01-26T19:56:53.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4136" PostTypeId="2" ParentId="3651" CreationDate="2016-01-26T21:36:28.423" Score="0" Body="&lt;p&gt;As for using a USB drive to boot into elementary OS, you don't need one. You can also use a DVD (not sure if a CD is big enough) and burn the elementary OS .iso to one (using ImgBurn or something similar). However, it will be slower than using a USB drive.  &lt;/p&gt;&#xA;" OwnerDisplayName="user3515" LastEditorUserId="34" LastEditDate="2016-01-27T16:33:42.387" LastActivityDate="2016-01-27T16:33:42.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4137" PostTypeId="2" ParentId="4126" CreationDate="2016-01-26T21:44:03.287" Score="1" Body="&lt;p&gt;Well ... not sure if this will help ... because what you typed may just be a typo on your part.&#xA;But assuming that /dev/sda IS your hard disk&#xA;you CANNOT make that bigger (unless you are a magician)&#xA;what you can do is change partition sizes.&#xA;Partitions names will look like &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;/dev/sda1 &lt;/li&gt;&#xA;&lt;li&gt;/dev/sda2&#xA;etcetera&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Just remember ... the partition must be contiguous space on the disk&#xA;(well unless you are using LVM or btrfs) ... in which case your question is not giving enough information for someone to help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now if you don't have the space on the disk to move and re-size partitions ... you may be better off using clonezilla to copy your entire disk off ... re-partition your drive .... then use clonezilla to restore with resized partitions ... I have just done that to transfer files from a disk reporting SMART errors to a new one ... worked like a champ.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-01-26T21:44:03.287" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4138" PostTypeId="1" CreationDate="2016-01-26T21:58:02.900" Score="1" ViewCount="395" Body="&lt;p&gt;I tried posting something akin to this on SuperUser but I think it's too specific to elementary OS to be helpful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Inserted USB into my drive&lt;/li&gt;&#xA;&lt;li&gt;Inserted cd with burned iso&lt;/li&gt;&#xA;&lt;li&gt;Booted computer to Disk Drive which started elementary&lt;/li&gt;&#xA;&lt;li&gt;Started install process and chose &quot;something else&quot;&lt;/li&gt;&#xA;&lt;li&gt;Installed elementary to /dev/sdb (USB)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;All looked well for a while. I rebooted with the USB still inserted and I got the normal grub menu which (after 10 seconds) booted to Elementary, great!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I rebooted again, and removed the USB. Now I just get a grub command prompt akin to &lt;code&gt;grub&amp;gt;&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I enter the exit command, it echos &quot;boot ubuntu&quot; and takes me to the BIOS device selector.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I click the Disk drive, rather than it booting Windows, I see:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ubuntu&#xA;Windows Boot Manager&#xA;Ubuntu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I was expecting that if I selected to boot from the USB, I would get the grub menu, but now I &lt;em&gt;always&lt;/em&gt; get it regardless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to force grub to boot to Windows if the USB is not inserted? (I've already configured the USB to boot to whatever I want when it's inserted, but &lt;/p&gt;&#xA;" OwnerUserId="3869" LastEditorUserId="3757" LastEditDate="2016-05-06T05:27:13.967" LastActivityDate="2016-09-03T06:58:38.233" Title="Installation to USB put grub on my hard disk and changed boot parameters" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4141" PostTypeId="1" AcceptedAnswerId="4144" CreationDate="2016-01-27T09:43:15.567" Score="0" ViewCount="474" Body="&lt;p&gt;(Sorry for my english, i am french)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hello,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When creating a new folder or a new file in a Samba network share or WebDAV, the folder or file is created with the name &quot;new folder&quot; (nouveau dossier in french) or &quot;new file&quot; (nouveau fichier in french) but it's not him it's possible rename, this is the first record (alphabetical order) either for a new folder or a new file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The new folder or file retains the name &quot;new folder&quot; or &quot;new file&quot; when the wrong folder is renamed with the new name instead of the new folder or file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem is random. Sometimes it does, sometimes not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What to do ? Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TGdkm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TGdkm.png&quot; alt=&quot;create a folder or file on network share&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3910" LastActivityDate="2016-01-27T12:17:20.153" Title="Pantheon-files create a folder or file on network share (bug)" Tags="|pantheon-files|folder|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4142" PostTypeId="2" ParentId="4035" CreationDate="2016-01-27T09:43:53.920" Score="1" Body="&lt;p&gt;I assume you are using Freya stable version (Files r1980)?  Do the thumbnails show if you press the reload button?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing that can stop thumbnailing working (at all) is if you show a folder containing a .webm file; this seems to cause tumblerd to hang.  The latest version of Files does not suffer from this as it uses a newer version of tumbler. (see bug 1532512).  To escape from this navigate away from the offending folder, kill the tumblerd then reload the folder (without .webm file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, Files will not thumbnail files situated on a network folder.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, using r1980 version I do not have any trouble with thumbnailing jpg files in a local folder (without .webm).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T09:43:53.920" CommentCount="14" ContentLicense="CC BY-SA 3.0" />
  <row Id="4143" PostTypeId="1" AcceptedAnswerId="4166" CreationDate="2016-01-27T12:05:57.847" Score="1" ViewCount="449" Body="&lt;p&gt;After installing via USB stick with everything default but using encrypted disk I rebooted, and the following happens:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Dell logo shows up, as usual&lt;/li&gt;&#xA;&lt;li&gt;GRUB screen&lt;/li&gt;&#xA;&lt;li&gt;elementary OS logo stuck for several minutes.&lt;/li&gt;&#xA;&lt;li&gt;If I press ESC the logo goes away and it says &quot;No volume groups found&quot;. Pressing ESC again makes the logo appear&lt;/li&gt;&#xA;&lt;li&gt;BusyBox comes up and I don't know what to do with it&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I've tried installing with and without updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previously I was using Xubuntu 15.10 with the same install settings without a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The hardware is a Dell Inspiron I13-7348-C40 laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed without encryption and the problem continues. Below are the error messages I receive in each situation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Encrypted install, after waiting for the elementary OS logo disappear:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Begin: Mounting root file system ... Begin: Running /scripts/local-top(didn't get the whole line in the picture)&#xA;  Reading all physical volumes. This may take a while...&#xA;  No volume groups found&#xA;  No volume groups found&#xA;Begin: Waiting for encrypted source device... ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then the BusyBox/initramfs appears. I type &lt;code&gt;exit&lt;/code&gt; and get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    Check cryptopts=source= bootarg: cat /proc/cmdline&#xA;    or missing modules, devices: cat /proc/modules; ls /dev&#xA;-r ALERT! /dev/disk/by-uuid/d1d....... does not exist. Dropping to a shell!&#xA;BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) [... and so on]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After I installed without cryptography I get this before BusyBox:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gave up waiting for root device. Common problems:&#xA; - Boot args (cat /proc/cmdline)&#xA;   - Check rootdelay= (did the system wait long enough?)&#xA;   - Check root= (did the system wait for the right device?)&#xA; - Missing modules (cat /proc/modules; ls /dev)&#xA;ALERT!  /dev/disk/by-uuid/74bc... does not exist. Dropping to a shell!&#xA;&#xA;&#xA;BusyBox v1.21.1 (Ubuntu 1:1.21.0-1ubuntu1) [... and so on]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to boot elementary OS using &lt;strong&gt;SystemRescueCd&lt;/strong&gt; and choosing the option to boot the existing OS so it seems elementary OS is doing something weird in the boot config.&lt;/p&gt;&#xA;" OwnerUserId="3913" LastEditorUserId="34" LastEditDate="2016-02-09T18:17:32.313" LastActivityDate="2017-11-05T17:22:57.657" Title="elementary OS 0.3.2 won't boot (No volume groups found)" Tags="|release-freya|system-installation|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4144" PostTypeId="2" ParentId="4141" CreationDate="2016-01-27T12:17:20.153" Score="1" Body="&lt;p&gt;This is a bug which is currently being worked on - see:&#xA;lp:~jeremywootten/pantheon-files/various-fixes-part3-fix-network-file-operations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the meantime, you could try creating and renaming the file locally and then uploading it.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T12:17:20.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4145" PostTypeId="2" ParentId="4127" CreationDate="2016-01-27T12:22:35.367" Score="1" Body="&lt;p&gt;Files is intentionally set to not thumbnail remote files by default in order to reduce network traffic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a branch to provide an option to turn thumbnailing on - see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lp:~jeremywootten/pantheon-files/fix-1458398-option-thumbnail-remote&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but it needs some more work and other branches have a higher priority.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T12:22:35.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4146" PostTypeId="2" ParentId="3763" CreationDate="2016-01-27T12:32:27.217" Score="1" Body="&lt;p&gt;If you have correctly installed the new version in the correct place, removed the old version and restarted the daemon (or the whole system) I do not think you have to do anything with Files.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T12:32:27.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4147" PostTypeId="2" ParentId="3289" CreationDate="2016-01-27T12:55:13.453" Score="1" Body="&lt;p&gt;There are a number of outstanding wishlist bug reports requesting the ability to show and sort by columns other than those currently provided in List View.  Limited developer resources means this may be not addressed for a while.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T12:55:13.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4148" PostTypeId="2" ParentId="2159" CreationDate="2016-01-27T12:57:30.087" Score="0" Body="&lt;p&gt;Work is in progress to improve FTP server (and other remote protocol) handling in Files and hopefully this will land in Loki.  A dedicated app is likely to be remain better than a general purpose file browser however.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-01-27T12:57:30.087" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4149" PostTypeId="2" ParentId="4138" CreationDate="2016-01-27T14:23:39.280" Score="1" Body="&lt;p&gt;Boot into elementary and open the terminal and type :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo software-properties-gtk -e universe &amp;amp;&amp;amp; sudo apt-get update &#xA;sudo apt-get install mbr&#xA;sudo install-mbr /dev/sdX&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace sdX with the correct disk device which I have think is &lt;code&gt;sda&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you cannot boot elementary on the USB. Boot to the live USB / CD and type &lt;code&gt;sudo grub-install /dev/sdb&lt;/code&gt; replacing &lt;code&gt;sdb&lt;/code&gt; with the USB drive device (which you say is &lt;code&gt;sdb&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-01-27T14:23:39.280" CommentCount="20" ContentLicense="CC BY-SA 3.0" />
  <row Id="4150" PostTypeId="2" ParentId="4128" CreationDate="2016-01-27T14:41:24.640" Score="3" Body="&lt;p&gt;Unfortunately Midori is not supported by Drive &amp;amp; Docs. I emulated Firefox with Midori without success.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here the Requirements:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/drive/answer/2375082?hl=en&quot; rel=&quot;nofollow&quot;&gt;https://support.google.com/drive/answer/2375082?hl=en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-01-27T14:41:24.640" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4151" PostTypeId="1" CreationDate="2016-01-27T15:29:56.917" Score="3" ViewCount="10886" Body="&lt;p&gt;I just installed elementary Freya 0.3.2 and I can't find my system monitor. I spent several hours updating the OS after installation, but I want to see if my swap partition is configured to this installation so I would like to open a system monitor in order to see what resources I have available. Thanks in advance. &lt;/p&gt;&#xA;" OwnerUserId="3914" LastActivityDate="2016-01-27T15:45:09.513" Title="New to elementary, can't find system monitor" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2016-01-30T12:37:32.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="4152" PostTypeId="2" ParentId="4151" CreationDate="2016-01-27T15:39:51.667" Score="5" Body="&lt;p&gt;The system monitor is not installed by default in elementary OS. You can install it by opening the terminal and run this command: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For a better look about the disk partitioning i recommend GParted:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3747" LastEditorUserId="218" LastEditDate="2016-01-27T15:45:09.513" LastActivityDate="2016-01-27T15:45:09.513" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4154" PostTypeId="1" CreationDate="2016-01-27T17:53:24.197" Score="6" ViewCount="1619" Body="&lt;p&gt;Because Windows uses local time as their base, I need to set elementary OS to also run in local time or it screws up my Windows 10 time setting and updates. How can I get elementary OS to run on local time instead of UTC?&lt;/p&gt;&#xA;" OwnerUserId="3914" LastEditorUserId="45" LastEditDate="2016-01-27T18:47:18.807" LastActivityDate="2016-08-27T20:39:06.830" Title="How can I Adjust UTC/Local Time Zone" Tags="|release-freya|time|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4155" PostTypeId="1" CreationDate="2016-01-27T18:34:01.130" Score="3" ViewCount="160" Body="&lt;p&gt;When you press &lt;strong&gt;Super + L&lt;/strong&gt;, it locks the screen. This shortcut is not available in the keyboard settings to change, for some reason. I'd love to change the command &lt;code&gt;dm-tool -lock&lt;/code&gt; command that it executes to &lt;code&gt;xscreensaver-command -lock&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know where I would change that? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3916" LastActivityDate="2016-01-27T19:18:07.530" Title="How to change Super + L screen lock command?" Tags="|greeter|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-02T14:31:22.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="4156" PostTypeId="2" ParentId="4154" CreationDate="2016-01-27T18:42:38.473" Score="0" Body="&lt;p&gt;Open &quot;System Settings&quot; and select &quot;Date &amp;amp; Time&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To use Network Time&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select your time zone by clicking in the map or by clicking the button next to &quot;time zone:&quot; and selecting your time zone from the popover.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To set the time manually&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the bottom of the window, click the switch next to &quot;network time&quot;. Set the date and time using the now-enabled text entry boxes&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-01-27T18:49:00.277" LastActivityDate="2016-01-27T18:49:00.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4157" PostTypeId="2" ParentId="4154" CreationDate="2016-01-27T18:48:20.197" Score="3" Body="&lt;p&gt;&lt;strong&gt;Make Linux use 'Local' time&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To tell your System that the hardware clock is set to 'local' time:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/rcS&#xA;# change the following section&#xA;&#xA;# assume that the BIOS clock is set to UTC time (recommended)&#xA;UTC=no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;elementary OS &amp;amp; Linux Mint are based on Ubuntu. So most commands from Ubuntu are also working on elementary OS &amp;amp; Mint. &lt;/p&gt;&#xA;" OwnerUserId="3747" LastEditorUserId="34" LastEditDate="2016-02-29T17:41:51.673" LastActivityDate="2016-02-29T17:41:51.673" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4159" PostTypeId="1" CreationDate="2016-01-27T20:11:21.837" Score="2" ViewCount="9580" Body="&lt;p&gt;I just downloaded elementary OS and did a fresh install and noticed that apps have no menus (File, View, Edit, etc.).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I searched on Google and found &lt;a href=&quot;https://www.google.com.sa/url?sa=t&amp;amp;rct=j&amp;amp;q=&amp;amp;esrc=s&amp;amp;source=web&amp;amp;cd=9&amp;amp;ved=0ahUKEwjouqOK5MrKAhXH1BoKHa1nCJAQFgg9MAg&amp;amp;url=https%3A%2F%2Flaunchpad.net%2F~varlesh-l%2F%2Barchive%2Fubuntu%2Ftest&amp;amp;usg=AFQjCNEGGbKZ_mUJbCe6UkgN6CczXKpt1w&quot; rel=&quot;nofollow noreferrer&quot;&gt;something to add a &quot;Global Menu&quot;&lt;/a&gt; similar to OS X, but it didn't work, so I uninstalled it. I still have no menus on any application, not with a fresh install and not with that link I found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on elementary OS 0.3.2 Freya 64-bit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I don't care if they show &quot;globally&quot; at the top or inside of each window, I just want app menus to show)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eigkA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eigkA.png&quot; alt=&quot;no_menus&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3918" LastActivityDate="2018-11-22T17:26:39.330" Title="How to get application menus in elementary OS?" Tags="|applications|wingpanel|menu|user-interface|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4160" PostTypeId="2" ParentId="4159" CreationDate="2016-01-27T20:42:10.647" Score="2" Body="&lt;h1&gt;elementary apps don't have menu bars.&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;In fact, most modern apps don't have menu bars. Chrome, GNOME, elementary, Metro apps on Windows 10, iOS and Android.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Saving is done automatically, exiting is the same as closing, and any other functionality that might be missing is usually in a more accessible button, maybe a popover or slide.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-01-27T20:42:10.647" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="4161" PostTypeId="1" CreationDate="2016-01-28T10:13:21.630" Score="2" ViewCount="815" Body="&lt;p&gt;I tried to switch from Windows to Linux (elementary OS) but everytime I ended in a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following steps i tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Set &quot;Nomodeset&quot; before the installation starts (+ replaced &quot;quiet spash&quot; with &quot;nomodeset&quot;), but after that I ended in a &lt;strong&gt;black screen&lt;/strong&gt;. I have to boot in the recovery mode to see something.&lt;/li&gt;&#xA;&lt;li&gt;In recovery mode i tried to install the drivers that are offered from elementary OS = &lt;strong&gt;black screen&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;I tried to install the official nvidia drivers from their download site = &lt;strong&gt;black screen&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;I tried the following (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1592/installing-nvidia-drivers-blank-screen&quot;&gt;Installing NVidia Drivers - Blank Screen&lt;/a&gt;) = &lt;strong&gt;black screen&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Ubuntu forum: &lt;a href=&quot;https://askubuntu.com/questions/561295/how-to-use-nvidia-gtx-970-gpu&quot;&gt;https://askubuntu.com/questions/561295/how-to-use-nvidia-gtx-970-gpu&lt;/a&gt; = &lt;strong&gt;black screen&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/howto-install-latest-nvidia-driver-on-linux-without-getting-black-screen.7/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?threads/howto-install-latest-nvidia-driver-on-linux-without-getting-black-screen.7/&lt;/a&gt; = &lt;strong&gt;black screen&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Everytime I used a clean installation of freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My Setup:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Asus x99 Deluxe Motherboard&lt;/li&gt;&#xA;&lt;li&gt;16Gb Crucial DDR4 RAM&lt;/li&gt;&#xA;&lt;li&gt;NVIDIA Geforce GTX970&lt;/li&gt;&#xA;&lt;li&gt;Samsung 512GB SSD 850 Pro&lt;/li&gt;&#xA;&lt;li&gt;Intel i7 5820k&lt;/li&gt;&#xA;&lt;li&gt;4x FullHD Monitors&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Any ideas? Sorry for my bad english.&lt;/p&gt;&#xA;" OwnerUserId="3922" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-08-07T18:31:15.313" Title="Black screen, when installing NVIDIA drivers (GTX970)" Tags="|release-freya|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4163" PostTypeId="2" ParentId="4159" CreationDate="2016-01-28T20:36:42.833" Score="0" Body="&lt;p&gt;elementary OS doesn't do anything one way or another about menubars in 3rd party apps. If you've installed some piece of software to add global menus, that is probably still removing the menubars from these apps. Make sure you completely remove anything related to global menu.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-01-28T20:36:42.833" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4164" PostTypeId="1" CreationDate="2016-01-28T20:54:56.467" Score="1" ViewCount="1057" Body="&lt;p&gt;I got an error message that said please run Package Manager from right-click menu or apt-get in a terminal to see what is wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what right-click menu this refers to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run apt-get update it says could not open lock file (permission denied)&lt;/p&gt;&#xA;" OwnerUserId="3924" LastActivityDate="2016-03-29T17:08:26.563" Title="How to run Package Manager" Tags="|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4165" PostTypeId="1" CreationDate="2016-01-28T23:42:18.207" Score="2" ViewCount="951" Body="&lt;p&gt;I just did a fresh install of elementary OS Freya. In Software &amp;amp; Updates, all these boxes are unchecked:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Important security updates (trusty-security)&lt;/li&gt;&#xA;&lt;li&gt;Recommended updates (trusty-updates)&lt;/li&gt;&#xA;&lt;li&gt;Pre-released updates (trusty-proposed)&lt;/li&gt;&#xA;&lt;li&gt;Unsupported updates (trusty-backports)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fPywc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fPywc.png&quot; alt=&quot;software &amp;amp; updates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't check them, for some reason. When I check one of them, and enter my password, it immediately unchecks itself again. Even after manually updating and restarting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, when I click X, I get this message (every single time):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mBZ1z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mBZ1z.png&quot; alt=&quot;the information about available software is out-of-date&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I click Reload, it downloads something, it closes. I open Software &amp;amp; Updates again, and all of this happens again.&lt;/p&gt;&#xA;" OwnerUserId="3925" LastEditorUserId="26" LastEditDate="2016-02-03T01:41:47.153" LastActivityDate="2019-09-22T05:02:00.260" Title="Why can't I enable the various upstream repositories?" Tags="|updates|repositories|" AnswerCount="1" CommentCount="6" ClosedDate="2019-10-22T03:21:43.110" ContentLicense="CC BY-SA 3.0" />
  <row Id="4166" PostTypeId="2" ParentId="4143" CreationDate="2016-01-29T03:20:23.010" Score="0" Body="&lt;p&gt;&lt;strong&gt;tl;dr&lt;/strong&gt;: try creating your USB stick image again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turns out this might have been a problem with the USB stick image.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instructions from elementary's page on how to prepare the stick on Ubuntu (yes, I checked the hash) and it looked ok but had this problem after installing the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today, hopeless, I decided to create the USB drive again using Mac OS X, following the corresponding instructions and using the same USB stick. For my surprise it worked this time. So the problem was probably with the old image.&lt;/p&gt;&#xA;" OwnerUserId="3913" LastActivityDate="2016-01-29T03:20:23.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4168" PostTypeId="1" CreationDate="2016-01-29T12:43:38.660" Score="0" ViewCount="929" Body="&lt;p&gt;I have installed oh-my-zsh this morning and now command line is too long, it looks something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my-username@my-pc-name ~/Desktop/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to change &quot;my-username@my-pcname ~&quot; part just to &quot;~&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have done it on my Linux Mint but can't make it work here. I have edited my .bashrc file (following &lt;a href=&quot;https://askubuntu.com/questions/145618/how-can-i-shorten-my-command-line-bash-prompt&quot;&gt;this&lt;/a&gt; instructions) but changes wont take effect.&lt;/p&gt;&#xA;" OwnerUserId="3927" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2020-08-15T11:29:25.230" Title="How can I shorten my command line (bash/oh-my-zsh) prompt?" Tags="|pantheon-terminal|bash|zsh|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4169" PostTypeId="2" ParentId="4168" CreationDate="2016-01-29T13:17:55.133" Score="1" Body="&lt;p&gt;Okey i just realized that editing .bashrc file was bad idea, i c/p .zshrc file from Mint and it works like charm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://pastebin.com/hkFJDQGg&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; you can find pastebin of file if someone is interested.&lt;/p&gt;&#xA;" OwnerUserId="3927" LastActivityDate="2016-01-29T13:17:55.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4171" PostTypeId="1" AcceptedAnswerId="4221" CreationDate="2016-01-29T13:21:01.940" Score="1" ViewCount="702" Body="&lt;p&gt;When I try to compile a project with pkg &lt;a href=&quot;http://www.valadoc.org/#!api=libcanberra/Canberra&quot; rel=&quot;nofollow&quot;&gt;libcanberra&lt;/a&gt; using command [valac --pkg libcanberra *.vala&#xA;], I am getting below error,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;error: Package `libcanberra' not found in specified Vala API&#xA;  directories or GObject-Introspection GIR directories Compilation&#xA;  failed: 1 error(s), 0 warning(s)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="144" LastEditorUserId="144" LastEditDate="2016-01-29T13:26:32.480" LastActivityDate="2016-02-02T15:36:10.083" Title="error: Package `libcanberra' not found in specified Vala API directories" Tags="|programming|development|vala|" AnswerCount="1" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4172" PostTypeId="2" ParentId="4164" CreationDate="2016-01-29T13:22:36.937" Score="3" Body="&lt;p&gt;When you get permission denied try adding &lt;code&gt;sudo&lt;/code&gt; before the command. Your commmand should be &lt;code&gt;sudo apt-get update&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="4502" LastEditDate="2016-03-29T17:08:26.563" LastActivityDate="2016-03-29T17:08:26.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4173" PostTypeId="1" CreationDate="2016-01-29T14:57:27.003" Score="2" ViewCount="2919" Body="&lt;p&gt;How to enable web-cam to record video.?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like the inbuilt camera app want capture video with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is there any solution ?&lt;/p&gt;&#xA;" OwnerUserId="3353" LastEditorUserId="45" LastEditDate="2016-01-31T20:01:41.460" LastActivityDate="2016-04-01T08:44:02.747" Title="how to enable web-cam to record video?" Tags="|applications|webcam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4174" PostTypeId="1" AcceptedAnswerId="4175" CreationDate="2016-01-29T18:00:23.773" Score="3" ViewCount="3264" Body="&lt;p&gt;I would like to import my contacts from my android phone address book.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a VCF file with multiple contacts along with their photos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there an address book that is part of or can be integrated into Geary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Terry&lt;/p&gt;&#xA;" OwnerUserId="3929" LastActivityDate="2017-04-17T14:55:15.447" Title="Is there an address book for Geary" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4175" PostTypeId="2" ParentId="4174" CreationDate="2016-01-29T19:03:16.037" Score="7" Body="&lt;p&gt;According to &lt;a href=&quot;https://mail.gnome.org/archives/geary-list/2015-February/msg00025.html&quot;&gt;this newsletter post&lt;/a&gt;, contact sync for Geary was planned but never implemented. The original developers of Geary shut down, but the Elementary team has &lt;a href=&quot;https://twitter.com/elementary/status/668677459307433985&quot;&gt;forked Geary&lt;/a&gt; and continues to develop the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary at one point had a contact manager called Dexter, but this app was &lt;a href=&quot;http://old.elementary.io/answers/why-no-dexter&quot;&gt;pulled until it could be revamped&lt;/a&gt;. The project still exists and is &lt;a href=&quot;https://code.launchpad.net/dexter-contacts&quot;&gt;active in Launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Apps/Contacts&quot;&gt;Gnome Contacts&lt;/a&gt; would probably work well on Elementary, but it doesn't currently integrate with Geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short: there's not currently a contact manager that integrates with Geary, but it could definitely happen in the future.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-01-29T19:03:16.037" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4177" PostTypeId="1" AcceptedAnswerId="4532" CreationDate="2016-01-30T07:50:12.137" Score="3" ViewCount="2815" Body="&lt;p&gt;On my machine, I have two bluetooth adapters. One inside (connected to the wifi) that has terrible range, and a bluetooth dongle (usb) that has excellent range.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On elementary OS, it automatically selects the adapter inside the machine. I need it to select the bluetooth dongle over the internal adapter, whether automatically or  manually...I just need to do it somehow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried hotplugging the USB, but it doesn't help, the entire bluetooth settings menu is only recognizing the internal adapter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've gotten this to work on Ubuntu on the same machine, so the hardware is fine, it's the software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output from &lt;code&gt;lsusb; lspci -nnk | grep -iA2 net&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 004 Device 002: ID 8087:8001 Intel Corp. &#xA;Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 002: ID 8087:8009 Intel Corp. &#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 006: ID 8087:07dc Intel Corp. &#xA;Bus 001 Device 005: ID 5986:066d Acer, Inc &#xA;Bus 001 Device 004: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0&#xA;Bus 001 Device 003: ID 1c7a:0603 LighTuning Technology Inc. &#xA;Bus 001 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;06:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3] (rev 83)&#xA;Subsystem: Intel Corporation Dual Band Wireless AC 3160 [8086:8070]&#xA;Kernel driver in use: iwlwifi&#xA;07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)&#xA;Subsystem: CLEVO/KAPOK Computer Device [1558:7500]&#xA;Kernel driver in use: r8169&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;/p&gt;&#xA;" OwnerUserId="2561" LastEditorUserId="34" LastEditDate="2016-02-29T17:49:22.523" LastActivityDate="2019-05-07T11:18:45.003" Title="How to select bluetooth dongle over internal bluetooth card" Tags="|settings|bluetooth|hardware|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4178" PostTypeId="1" CreationDate="2016-01-30T08:21:29.110" Score="4" ViewCount="103" Body="&lt;p&gt;I've updated my PC last night (January 29th) with only 3 updates available, libnl-3-200, libnl-genl-3-200 and libnl-route-3-200, all version 3.2.21-1ubuntu1, and after reboot my network manager was gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalling network manager nor restarting the demon manually did not helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to download previous Trusty versions of those packages (3.2.21-1) and downgrade them back with dpkg. After reboot things went back to normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2016-01-30T09:22:17.083" Title="Warning: Three libnl* v.3.2.21-1ubuntu1, update from January 29th broke my network manager" Tags="|networking|" AnswerCount="0" CommentCount="5" ClosedDate="2016-01-30T12:32:15.690" ContentLicense="CC BY-SA 3.0" />
  <row Id="4180" PostTypeId="1" AcceptedAnswerId="4181" CreationDate="2016-01-30T09:32:11.143" Score="2" ViewCount="5468" Body="&lt;p&gt;I updated my Elementary OS like always with the update manager.&#xA;After reboot no internet anymore. No Wifi and no ethernet worked.&#xA;I run sudo lshw -C network&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network DEAKTIVIERT               &#xA;       Beschreibung: Kabellose Verbindung&#xA;       Produkt: Centrino Wireless-N 2230&#xA;       Hersteller: Intel Corporation&#xA;       Physische ID: 0&#xA;       Bus-Informationen: pci@0000:04:00.0&#xA;       Logischer Name: wlan0&#xA;       Version: c4&#xA;       Seriennummer: 68:17:29:4d:ba:de&#xA;       Breite: 64 bits&#xA;       Takt: 33MHz&#xA;       Fähigkeiten: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       Konfiguration: broadcast=yes driver=iwlwifi driverversion=3.16.0-59-generic firmware=18.168.6.1 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;       Ressourcen: irq:48 memory:e3500000-e3501fff&#xA;  *-network DEAKTIVIERT&#xA;       Beschreibung: Ethernet interface&#xA;       Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       Hersteller: Realtek Semiconductor Co., Ltd.&#xA;       Physische ID: 0&#xA;       Bus-Informationen: pci@0000:05:00.0&#xA;       Logischer Name: eth0&#xA;       Version: 07&#xA;       Seriennummer: 28:d2:44:0c:4b:24&#xA;       Größe: 1Gbit/s&#xA;       Kapazität: 1Gbit/s&#xA;       Breite: 64 bits&#xA;       Takt: 33MHz&#xA;       Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.178.51 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;       Ressourcen: irq:43 ioport:2000(Größe=256) memory:e2404000-e2404fff memory:e2400000-e2403fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It says: DEAKTIVIERT -&gt; deactivated.&#xA;I tried to put &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;auto wlan0&#xA;iface wlan0 inet dhcp&#xA;auto eth0&#xA;iface eth0 inet dhcp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;into /etc/network/interfaces. But then Freya didn't start. I chose an older kernel version to start (59 instead of 60) and the internet went well.&#xA;But if I start Freya again the normal way it will be gone again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Lenovot Think-Pad E531&#xA;Till today Freya was working super fast and great. Hope somebody can help me with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to downgrade the network iface&#xA;Änderungen für network-manager-dbg Versionen:&#xA;Installierte Version: 0.9.4.0-0ubuntu3 &amp;lt;- installed version&#xA;Verfügbare Version: 0.9.8.8-0ubuntu7.2 &amp;lt;- version to be installed&lt;/p&gt;&#xA;" OwnerUserId="3937" LastActivityDate="2016-01-30T11:23:30.377" Title="Wifi and Ethernet Disabled after last Freya update" Tags="|release-freya|networking|wifi|" AnswerCount="1" CommentCount="4" ClosedDate="2016-01-30T12:31:14.350" ContentLicense="CC BY-SA 3.0" />
  <row Id="4181" PostTypeId="2" ParentId="4180" CreationDate="2016-01-30T11:23:30.377" Score="2" Body="&lt;p&gt;Check out my post here: &lt;a href=&quot;http://goo.gl/y2gpFd&quot; rel=&quot;nofollow&quot;&gt;http://goo.gl/y2gpFd&lt;/a&gt; it should help.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2016-01-30T11:23:30.377" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4182" PostTypeId="1" CreationDate="2016-01-30T11:29:28.817" Score="2" ViewCount="31" Body="&lt;p&gt;Today, for no reason I can discern, the network indicator icon is missing. I happen to also be away from home in a business trip, so I am reliant on wifi hotspots for internet access.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the icon isn't there, I can't connect to wifi, and if I can't connect to the internet, I can't take usual actions like re installing any network related packages or searching on my laptop for solutions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm asking this question via my phone, which I also can't use to connect my laptop to the internet because even when I try using USB tethering, there seems to be no internet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get my network icon back and reconnect to the internet?&lt;/p&gt;&#xA;" OwnerUserId="2827" LastActivityDate="2016-01-30T11:29:28.817" Title="Network icon suddenly gone, can't access wifi hotspot" Tags="|networking|" AnswerCount="0" CommentCount="0" ClosedDate="2016-01-30T22:50:27.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="4183" PostTypeId="1" AcceptedAnswerId="4184" CreationDate="2016-01-30T12:10:05.647" Score="11" ViewCount="9924" Body="&lt;p&gt;After updating the OS today and rebooting, the wifi and ethernet has stopped working. Opening Network in the control panel gives me the error &quot;The system network services are not compatible with this version&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to fix this?&lt;/p&gt;&#xA;" OwnerUserId="3938" LastEditorUserId="26" LastEditDate="2016-01-30T12:28:15.893" LastActivityDate="2016-01-30T14:34:17.980" Title="How can I fix Networking, Wi-Fi and Ethernet, not being available after update?" Tags="|networking|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4184" PostTypeId="2" ParentId="4183" CreationDate="2016-01-30T12:27:28.830" Score="11" Body="&lt;p&gt;The Ubuntu proposed repository recently released version 3.2.21-1ubuntu1 of several libnl* packages. There currently break the networking manager in elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Step 1. Download the architecture appropriate files for these three packages.&lt;/h3&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/libnl-3-200&quot;&gt;libnl-3-200&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/libnl-genl-3-200&quot;&gt;libnl-genl-3-200&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/libnl-route-3-200&quot;&gt;libnl-route-3-200&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h3&gt;Step 2. Downgrade the Packages and Restart the Service&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i libnl-*.deb;&#xA;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step 3. Make sure it doesn't happen again.&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Uncheck the &lt;code&gt;proposed&lt;/code&gt; repository from your update settings. Sometimes these checkboxes don't work, since it is older Ubuntu software, so comment out the lines in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2016-01-30T12:32:55.447" LastActivityDate="2016-01-30T12:32:55.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4188" PostTypeId="1" AcceptedAnswerId="4197" CreationDate="2016-01-30T18:33:16.867" Score="3" ViewCount="280" Body="&lt;p&gt;Every time I install elementary OS it works okay, then after I take out  the flash drive and reboot it pops up saying [what I've written in the title of this question].&lt;/p&gt;&#xA;" OwnerUserId="3941" LastEditorUserId="242" LastEditDate="2016-01-31T06:51:09.523" LastActivityDate="2016-01-31T14:00:33.790" Title="After install &quot;reboot and select boot device&quot; &quot;or insert boot media in selected boot device and press a key&quot;" Tags="|system-installation|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4190" PostTypeId="1" AcceptedAnswerId="4191" CreationDate="2016-01-30T19:47:54.460" Score="3" ViewCount="962" Body="&lt;p&gt;I've had this issue both with Elementary OS and Xubuntu which both run Ubuntu 14.04 LTS. Every time I would boot up either Elementary or Xubuntu I would be left with my primary monitor working and my secondary monitor would not be working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Occasionally after tinkering with the display settings I would get it to appear only for it to disappear after I turn my secondary monitor on and off or do a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A bug report has already been posted for it on launchpad: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+bug/1313539&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+bug/1313539&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3943" LastActivityDate="2016-01-30T19:47:54.460" Title="Secondary monitor not working" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4191" PostTypeId="2" ParentId="4190" CreationDate="2016-01-30T19:47:54.460" Score="3" Body="&lt;p&gt;Fortunately I seem to have ran into a solution for Elementary OS and felt it would be best to share it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open up the application launcher and search for Additional Drivers and select 'Using Video driver for the AMD graphics accelerators from fglrx-updates (proprietary)'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I rebooted my system, both monitors have been working and I've tested to secondary monitor to ensure it works even after you turn it on and off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps people who have similar issues to what I had.&lt;/p&gt;&#xA;" OwnerUserId="3943" LastActivityDate="2016-01-30T19:47:54.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4192" PostTypeId="1" CreationDate="2016-01-30T19:58:17.843" Score="3" ViewCount="491" Body="&lt;p&gt;thanks for great OS system!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to change encoding of subtitles in default video app?&lt;/p&gt;&#xA;" OwnerUserId="3944" LastActivityDate="2019-04-26T18:00:50.207" Title="Any idea how to change encoding for subtitles?" Tags="|videos|video-player|" AnswerCount="1" CommentCount="3" ClosedDate="2019-04-28T13:23:42.813" ContentLicense="CC BY-SA 3.0" />
  <row Id="4194" PostTypeId="1" AcceptedAnswerId="4724" CreationDate="2016-01-31T08:51:15.513" Score="2" ViewCount="250" Body="&lt;p&gt;Kswapd keeps choking up my laptop. It's a new Dell ultrabook with 8GB RAM. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/159356&quot; rel=&quot;nofollow noreferrer&quot;&gt;This old bug report&lt;/a&gt; has the best description of the bug:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Any time I have a process that is both using 100% CPU and eats up memory, the system becomes unusable as soon as it starts using swap. At this point the hard drive starts thrashing and X slows to a crawl (the pointer updates maybe every 30 seconds). My only options at this point are to 1) hope the program finishes and gives some memory back, 2) wait for swap to fill completely so the kernel will kill the program, or 3) reboot the computer. The latter option is usually 5-10 minutes faster.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In my experience, this only happens with elementaryOS. I ran stock Ubuntu 14.04, 14.10 and 15.04 with innumerable heavy processes and never ran into this issue with kswapd. Last time I installed elementary, it was on an Acer Chromebook and the exact same issue arose after running too many processes at once (to be spec., usually more than 6 browser tabs in Chrome, Wine Photoshop, JetBrains IDE, maybe FF or another browser open as well).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried messing around with swappiness as suggested in this &lt;a href=&quot;https://askubuntu.com/questions/41778/computer-freezing-on-almost-full-ram-possibly-disk-cache-problem&quot;&gt;SO&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also reformatted the swap partition and re-made it (moving partitions around, I think, may have caused some problem there, because I noticed an improvement).&lt;/p&gt;&#xA;" OwnerUserId="3657" LastEditorUserId="84" LastEditDate="2018-05-15T12:29:42.590" LastActivityDate="2018-05-15T12:29:42.590" Title="Swap and Freezing" Tags="|release-freya|swap|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4195" PostTypeId="1" CreationDate="2016-01-31T09:22:55.103" Score="0" ViewCount="74" Body="&lt;p&gt;So I installed Freya 0.3.2 and it works fine but every time I boot it goes into grub2 command line and I have to type &quot;configfile /efi/grub/grub.cfg&quot; and then select GNU/Linux to boot into Freya. Once I do that it works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would be much easier for me not to have to type that in every time I boot lol&lt;/p&gt;&#xA;" OwnerUserId="3949" LastActivityDate="2016-04-30T12:05:50.377" Title="0.3.2 boots into grub2" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4196" PostTypeId="2" ParentId="4195" CreationDate="2016-01-31T10:46:00.713" Score="1" Body="&lt;p&gt;It seems like your grub configuration is wrong. Open the configuration with: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Compare these lines with your configuration: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=”quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX=”&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#GRUB_TERMINAL=console&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If there're differences change them and save the file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that procedure update Grub with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restart your computer and see the result.&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-01-31T10:46:00.713" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4197" PostTypeId="2" ParentId="4188" CreationDate="2016-01-31T14:00:33.790" Score="1" Body="&lt;p&gt;If you install system in UEFI mode, you need to show boot menu devices and select your disk partition with installed Elementary OS.&#xA;BUT,&#xA;i prefer to install system in LEGACY mode and you will not have any difficulty-&lt;/p&gt;&#xA;" OwnerUserId="3952" LastActivityDate="2016-01-31T14:00:33.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4200" PostTypeId="2" ParentId="4173" CreationDate="2016-01-31T20:01:27.843" Score="1" Body="&lt;p&gt;AFAIK, there isn't, but I use cheese for my webcam.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install cheese&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has many more options than the builtin camera. Yea, I would love to stick with the builtin stuff, but it needs many more features before it can be considered a full webcam program.&lt;/p&gt;&#xA;" OwnerUserId="2561" LastActivityDate="2016-01-31T20:01:27.843" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4201" PostTypeId="2" ParentId="4133" CreationDate="2016-01-31T20:57:45.203" Score="1" Body="&lt;p&gt;After getting frustrated with Freya, I installed Linux Mint, thinking that the problem was OS dependent, but I faced the exact problem there as well. I was able to solve it as follows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Update the kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't think this step is necessary, but I also had the problem of pixelated logo screen before the login screen. Updating to the latest stable kernel rectified that. You can get the deb files from &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/?C=N;O=D&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. Just download the files and do this-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2: Patching the linux kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop has Realtek wireless device, and as I discovered, it's a common problem between linux kernel and Realtek devices. Get the drivers from &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow&quot;&gt;https://github.com/lwfinger/rtlwifi_new&lt;/a&gt;. Download the project and-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ./rtlwifi_new&#xA;make&#xA;sudo make install&#xA;sudo modprobe &amp;lt;driver-name&amp;gt;/&amp;lt;driver-name&amp;gt;.o&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&amp;lt;driver-name&amp;gt;&lt;/code&gt; can be found in the output of the following command, under the &lt;code&gt;Wireless interface&lt;/code&gt; in the configuration field.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -C network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace &lt;code&gt;&amp;lt;driver-name&amp;gt;&lt;/code&gt; with the driver name, like in my case it was - &lt;code&gt;rtl8723be&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3898" LastActivityDate="2016-01-31T20:57:45.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4202" PostTypeId="1" AcceptedAnswerId="4216" CreationDate="2016-01-31T22:36:31.867" Score="2" ViewCount="736" Body="&lt;p&gt;I recently ran into the same Problem as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4183/how-can-i-fix-networking-wi-fi-and-ethernet-not-being-available-after-update&quot;&gt;Louis Kuan&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The fix from Lewis Goddard actually helped to get me connected again, thank you for that. Since i have to few reputation i am not allowed to comment on the Answer so I am forced to ask this way (sry for that):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there already any information about who exactly is affected by this mal update?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;what exactly are the 3 mentioned packages:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;libnl-3-200&lt;/li&gt;&#xA;&lt;li&gt;libnl-genl-3-200&lt;/li&gt;&#xA;&lt;li&gt;libnl-route-3-200&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I noticed, that my internet connection is a bit slower, than before the fix. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since i had to comment out certain lines in the &#xA;/etc/apt/sources.list file, i wont be getting any other updates from those   sources as well, right? So when can I expect an official update, that fixes this problem for good?&lt;/p&gt;&#xA;" OwnerUserId="3957" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-02-01T23:23:06.877" Title="the system network services are not compatible with this version - permanent fix" Tags="|updates|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4203" PostTypeId="1" AcceptedAnswerId="4217" CreationDate="2016-01-31T23:33:30.947" Score="2" ViewCount="1100" Body="&lt;p&gt;I noticed the latest version of Freya (0.3.2) has some fixes for GRUB and EFI. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yet I would like to know the right way to install it on dual boot with Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've seen many tutorials with different procedures each. Is there a definitive method for installing with dual boot Windows 10 with the latest version that features these new fixes?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some of my doubts are regarding differences between tutorials:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install alongside windows or Something else?&lt;/li&gt;&#xA;&lt;li&gt;Using boot repair after installation?&lt;/li&gt;&#xA;&lt;li&gt;Disable something from the windows side?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This is not the same as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16/prepare-for-dual-booting-with-windows&quot;&gt;Prepare for dual-booting with Windows&lt;/a&gt; since that method uses the &quot;Something else&quot; install method.&lt;/p&gt;&#xA;" OwnerUserId="3958" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-09-11T21:19:50.363" Title="Install alongside windows 10 UEFI" Tags="|system-installation|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4204" PostTypeId="2" ParentId="713" CreationDate="2016-02-01T05:19:55.717" Score="-1" Body="&lt;p&gt;For Ubuntu type: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove vivaldi-snapshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3960" LastEditorUserId="26" LastEditDate="2016-02-01T23:20:21.020" LastActivityDate="2016-02-01T23:20:21.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4205" PostTypeId="1" CreationDate="2016-02-01T12:23:48.920" Score="18" ViewCount="39255" Body="&lt;p&gt;I am a long time Windows user and I cannot for the life of me understand the rational behind not having a minimize button. What is the reasoning for this decision?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to get a minimize window control button?&lt;/p&gt;&#xA;" OwnerUserId="3965" LastEditorUserId="45" LastEditDate="2016-02-03T18:53:45.097" LastActivityDate="2016-02-04T04:10:08.630" Title="How can I get a &quot;minimize&quot; button?" Tags="|release-freya|themes|minimize|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4207" PostTypeId="2" ParentId="4205" CreationDate="2016-02-01T12:55:01.917" Score="9" Body="&lt;p&gt;You can get the minimize button with elementary-tweaks. Follow the following steps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Install elementary-tweaks (For Elementary Freya)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2:&lt;/strong&gt;&#xA;Go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Tweaks&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zn2xs.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zn2xs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i1ieo.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i1ieo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;code&gt;Appearance&lt;/code&gt; section you can change the windows control according to your likings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the elementary-tweaks you can find more options to tweak you Elementary OS&lt;/p&gt;&#xA;" OwnerUserId="218" LastEditorUserId="218" LastEditDate="2016-02-01T13:01:36.803" LastActivityDate="2016-02-01T13:01:36.803" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4208" PostTypeId="2" ParentId="4203" CreationDate="2016-02-01T13:15:38.407" Score="0" Body="&lt;p&gt;Not sure if you've seen these other two questions but they may help.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16/prepare-for-dual-booting-with-windows?rq=1&quot;&gt;Prepare for dual-booting with Windows&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/278/cannot-boot-freya-after-installing-alongside-windows-on-uefi/#306&quot;&gt;Cannot boot Freya after installing alongside Windows on UEFI&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3943" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-02-01T13:15:38.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4209" PostTypeId="1" AcceptedAnswerId="4220" CreationDate="2016-02-01T15:28:46.550" Score="1" ViewCount="230" Body="&lt;p&gt;Occasionally, the default gtk theme gets broken; I can see it in some apps (e.g. Firefox) which seem to revert to the old and ugly gnome theme.&#xA;But more evidently than that, I'm not able to successfully apply any new custom theme. Again, what I get is ugly gnome icons (in Wingpanel for example) and broken UI (missing buttons, gigantic toolbars etc.). The issue seems to be user-related: it doesn't occur in a guest session or if I launch Files as administrator. As a possible cause, I have played around with elementary-tweaks in the past.&#xA;Now my question is: how can I troubleshoot this issue? How can I find which config file in my home is responsible for this?&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2016-02-02T15:28:00.810" Title="Troubleshoot broken theme issues" Tags="|themes|icons|user-interface|" AnswerCount="1" CommentCount="0" ClosedDate="2017-10-08T17:23:10.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="4210" PostTypeId="1" CreationDate="2016-02-01T16:32:33.760" Score="1" ViewCount="19" Body="&lt;p&gt;hello equipment elementary os, I am writing to know if there is a solution to my problem of network support, for that matter, yesterday make an update Freya software version 0.3.2 (64 bits, and is that when I go to start a connection Internet me a notice appears that says: &quot;network services system are not compatible with this version&quot; there is the possibility to fix that ?..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;characteristics of my Ethernet card:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;  Realtek PCIe GBE Family Controller&lt;/p&gt;&#xA;&#xA;&lt;p&gt;characteristics of my wireless network card:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;802.11bgn Ralink RT3290 Wi-Fi Adapter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope your prompt response.&lt;/p&gt;&#xA;" OwnerUserId="3968" LastActivityDate="2016-02-01T19:13:26.123" Title="incompatible network problem elementary os 0.3.2 in my hp 450 notebook" Tags="|networking|" AnswerCount="0" CommentCount="3" ClosedDate="2016-02-01T23:19:03.233" ContentLicense="CC BY-SA 3.0" />
  <row Id="4211" PostTypeId="1" AcceptedAnswerId="4212" CreationDate="2016-02-01T16:40:48.127" Score="1" ViewCount="240" Body="&lt;p&gt;I'm a Spanish student. I need to know if it's possible to uninstall the GUI meaning, make the system start and work only with the terminal, like a server. I need it for an exam in my high school tomorrow. So, if someone knows how to do it, please help me. Thank you!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Dont worry, I'm using a virtual machine LOL Thank you I'm going to try it.&lt;/p&gt;&#xA;" OwnerUserId="3969" LastEditorUserId="26" LastEditDate="2016-02-01T23:17:14.133" LastActivityDate="2016-02-01T23:17:14.133" Title="Is it possible to uninstall the desktop?" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4212" PostTypeId="2" ParentId="4211" CreationDate="2016-02-01T18:15:43.803" Score="2" Body="&lt;p&gt;&lt;strong&gt;If You Need a Server OS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is possible to fully uninstall the GUI from the Terminal, but please be aware the elementary OS is not a server-targeted OS. If you need a server OS, I recommend &lt;a href=&quot;http://www.ubuntu.com/download/server&quot; rel=&quot;nofollow&quot;&gt;Ubuntu Server&lt;/a&gt;. You'll get the same Debian/Ubuntu underpinnings tailored to a server environment. This is much better than trying to work backwards from a desktop-focused OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If You Need a TTY Temporarily&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you just need to access a full-screen Terminal without any GUI, you can switch to another TTY with the keyboard shortcut &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt/option&lt;/kbd&gt;+&lt;kbd&gt;Fn&lt;/kbd&gt; where &lt;code&gt;n&lt;/code&gt; is a number 1-6.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If You Really Are Sure You Want to Uninstall The GUI (Don't Do This)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please be sure you really really really want to do this. This is probably a bad idea. It might be hard to recover. If you're 100% sure, open up a Terminal and enter the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That should uninstall the X server (the thing that lets us display graphics). Please don't do this unless you are 100% sure this is what you want.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-02-01T18:15:43.803" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4215" PostTypeId="2" ParentId="4125" CreationDate="2016-02-01T23:22:13.777" Score="1" Body="&lt;p&gt;The Mac Mini 1.1 was a Core duo, not a Core 2 Duo, and 32-bit only. It might work with a 32 bit version, but I'm guessing that the slight difference in the architecture might be the problem. From memory, that model Mac Mini didn't have a soldered processor, so you could take out the core 2 and put in a core 2 duo chip instead (check for compatibility first). It would still be 32 bit, though.&lt;/p&gt;&#xA;" OwnerUserId="3974" LastActivityDate="2016-02-01T23:22:13.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4216" PostTypeId="2" ParentId="4202" CreationDate="2016-02-01T23:23:06.877" Score="1" Body="&lt;p&gt;The update is currently in the &quot;proposed&quot; repository, which is used for testing updates. I think it is relatively safe to say that this specific one won't be making it into &quot;main&quot; anytime soon. Once another testing version is released, it will stop your network breaking from that repository, although I would never class &quot;proposed&quot; as &quot;safe&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;libnl&lt;/code&gt; is described as a &quot;library for dealing with netlink sockets&quot; at the &lt;a href=&quot;http://packages.ubuntu.com/trusty/libnl-3-200&quot; rel=&quot;nofollow&quot;&gt;Ubuntu Package&lt;/a&gt; site.&#xA;&lt;code&gt;genl&lt;/code&gt; is a &quot;library for dealing with netlink sockets - generic netlink&quot; and &lt;code&gt;route&lt;/code&gt; is a &quot;library for dealing with netlink sockets - route interface&quot;.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-02-01T23:23:06.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4217" PostTypeId="2" ParentId="4203" CreationDate="2016-02-01T23:33:54.677" Score="2" Body="&lt;p&gt;You should be able to just click &quot;Install alongside Windows&quot;, without the need for boot repair or any other modification. It's what I did on my most recent installation.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-02-01T23:33:54.677" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4218" PostTypeId="1" CreationDate="2016-02-02T06:31:30.757" Score="1" ViewCount="244" Body="&lt;p&gt;I'm looking at also getting either a MS Surface Pro 3 or a Macbook Air very soon, and installing elementary OS on it when I get it. My decision on which to get actually depends partly on how well the hardware of each is supported; things like the networking card, all keyboard keys, speakers, etc. Also, is the touch-screen well-supported? And how about the 'pen' / stylus?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also directly related; is there a place where we can see information on how well supported any given device is?&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2016-03-03T18:13:01.340" Title="Is the Surface Pro 3 hardware fully supported?" Tags="|hardware|macbook|surface-tablet|" AnswerCount="1" CommentCount="0" ClosedDate="2016-03-11T02:14:35.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="4220" PostTypeId="2" ParentId="4209" CreationDate="2016-02-02T15:28:00.810" Score="0" Body="&lt;p&gt;Icon themes inconsistencies appear to be solved by editing the &lt;code&gt;/usr/share/icons/default/index.theme&lt;/code&gt;, changing &quot;elementary&quot; to whichever theme you want to apply.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2016-02-02T15:28:00.810" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4221" PostTypeId="2" ParentId="4171" CreationDate="2016-02-02T15:36:10.083" Score="1" Body="&lt;p&gt;Installing libcanberra-dev package solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="144" LastActivityDate="2016-02-02T15:36:10.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4222" PostTypeId="1" CreationDate="2016-02-02T17:11:38.283" Score="1" ViewCount="179" Body="&lt;p&gt;I am using ElementaryOS on an Acer E5 Laptop with Intel Haswell Graphics and an Nvidia GT840M. The screen of that laptop is 1920x1080 and works fine. At work I connect a second monitor. That one support a resolution of up to 2560x1440. But in the settings it only shows a maximum of 1920x1200. I tried looking in the nvidia x server settings, but there it only shows I have one screen. &#xA;Does anyone have an idea what I could do to get the native resolution?&lt;/p&gt;&#xA;" OwnerUserId="3980" LastActivityDate="2016-08-31T02:48:06.890" Title="Second monitor doesn't show max supported resolution" Tags="|display|resolution|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4223" PostTypeId="2" ParentId="4218" CreationDate="2016-02-02T17:12:52.347" Score="0" Body="&lt;p&gt;elementary doesn't support or endorse any hardware at this time. There is no official hardware compatibility database.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically regarding touch, elementary OS isn't a tablet OS. Basic pointer-equivalent events should work, but things like multi-touch gestures will not.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-02-02T17:12:52.347" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4224" PostTypeId="1" CreationDate="2016-02-02T19:16:36.363" Score="3" ViewCount="5922" Body="&lt;p&gt;I have just installed Elementary OS Freya. I was using Ubuntu 15.10 with Gnome before this. Synergy was working just fine with that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now I since I have installed the .deb file Synergy crashes with the message &#xA; &lt;strong&gt;&lt;em&gt;System tray is unavailable, quitting&lt;/em&gt;&lt;/strong&gt; . Please help me. Synergy is very important for me. I share my mouse + keyboard with Macbook and Linux laptop&lt;/p&gt;&#xA;" OwnerUserId="3983" LastActivityDate="2016-02-02T19:29:50.930" Title="Synergy System tray is unavailable, quitting" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-03T01:44:43.693" ContentLicense="CC BY-SA 3.0" />
  <row Id="4225" PostTypeId="2" ParentId="4224" CreationDate="2016-02-02T19:29:50.930" Score="2" Body="&lt;p&gt;The problem is in a missinig package: sni-qt&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that command it works. Reference: &lt;a href=&quot;https://github.com/synergy/synergy/issues/4774&quot; rel=&quot;nofollow&quot;&gt;https://github.com/synergy/synergy/issues/4774&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Answer credit &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2z50ch/has_anyone_had_any_luck_with_synergy_on_freya/&quot; rel=&quot;nofollow&quot;&gt;Reddit&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3983" LastActivityDate="2016-02-02T19:29:50.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4226" PostTypeId="1" AcceptedAnswerId="4227" CreationDate="2016-02-02T19:32:35.830" Score="12" ViewCount="16509" Body="&lt;p&gt;Many 3rd party applications like Java, NodeWebkit, and Gtk2 applications don't seem to be able to display a system tray icon. Why is that? Is there a workaround?&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="26" LastEditDate="2019-02-20T01:34:23.227" LastActivityDate="2021-12-10T10:41:08.520" Title="How can I get applications to display a system tray icon?" Tags="|release-loki|release-freya|wingpanel|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4227" PostTypeId="2" ParentId="4226" CreationDate="2016-02-02T19:51:37.093" Score="15" Body="&lt;h2&gt;elementary OS does not support GtkStatusIcon (commonly referred to as system tray), and will drop support for the Ayatana Indicator API in the next release.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://developer.gnome.org/gtk3/stable/GtkStatusIcon.html&quot; rel=&quot;noreferrer&quot;&gt;GtkStatusIcon&lt;/a&gt; (the old API for apps to place icons in the panel) has been deprecated since 2014 and is not implemented in elementary OS. Please file a report with application developers that are still using this API requesting that they make their app function without it.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;I'm a developer and I want to implement this feature.&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Currently (in 0.3 Freya), only the Ayatana Indicator API is respected. However, as of 0.4 Loki, the panel will no longer implement the Ayatana API either. It is &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#system-indicators&quot; rel=&quot;noreferrer&quot;&gt;recommended in the elementary HIG&lt;/a&gt; that apps not explicitly use the indicator area at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're developing a music app, your app will automatically show in the sound indicator as long as it can be controlled through &lt;a href=&quot;http://specifications.freedesktop.org/mpris-spec/latest/&quot; rel=&quot;noreferrer&quot;&gt;MPRIS&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your app &lt;a href=&quot;http://valadoc.org/#!api=gio-2.0/GLib.Notification&quot; rel=&quot;noreferrer&quot;&gt;sends notifications&lt;/a&gt;, missed notifications will automatically be preserved in the notifications indicator (as of 0.4 Loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to present easily accessible actions while your app is closed or not running, &lt;a href=&quot;http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html#extra-actions&quot; rel=&quot;noreferrer&quot;&gt;follow the freedesktop.org actions specification&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;How can I work around this?&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Try installing &lt;code&gt;sni-qt&lt;/code&gt;. This works for some apps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Another option is to install a panel that supports this old API like &lt;code&gt;xfce4-panel&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-04-13T16:20:51.367" LastActivityDate="2016-04-13T16:20:51.367" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4228" PostTypeId="2" ParentId="1592" CreationDate="2016-02-02T20:00:03.907" Score="1" Body="&lt;p&gt;Type &lt;code&gt;software &amp;amp; updates&lt;/code&gt; in Sling Shot. Open Software &amp;amp; Updates. Move to &lt;code&gt;Additional Drivers&lt;/code&gt; pane. Check the if there are additional drivers listed there or not. If available then, choose the open that says: &lt;code&gt;(proprietary, tested)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the visual demo &lt;a href=&quot;https://www.elementarynow.com/graphic-drivers-for-elementary-os/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3983" LastActivityDate="2016-02-02T20:00:03.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4229" PostTypeId="1" CreationDate="2016-02-02T20:14:53.207" Score="1" ViewCount="249" Body="&lt;p&gt;I have attempted to install the os on my 2008 mbp. &#xA;Following the ubuntu interactions, I copied the os to usb, partitioned the ssd on the mac, did not format the new second partition and then installed reFIt and rebooted on choosing the the windows/fat option, the stayed on a screen showing only the following information&#xA;ACPI PCC PROBE FAILED&#xA;sdb no caching mode page found&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tried the google-fu but no ideas, any assistance?&lt;/p&gt;&#xA;" OwnerUserId="3984" LastEditorUserId="3757" LastEditDate="2016-05-06T08:52:00.753" LastActivityDate="2016-09-03T16:04:38.870" Title="Issues installing on MacBook Pro 5.1" Tags="|system-installation|dual-boot|macbook|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4230" PostTypeId="2" ParentId="4222" CreationDate="2016-02-02T22:28:01.810" Score="1" Body="&lt;p&gt;Just some questions (since I do not run multimonitor)&#xA;Have you tried making the second monitor the primary display?&#xA;If so ... does it show the higher resolutions?&#xA;Have you tried JUST the second monitor?&#xA;Does it then show the higher resolutions?&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-02-02T22:28:01.810" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4231" PostTypeId="2" ParentId="3362" CreationDate="2016-02-02T22:45:07.550" Score="1" Body="&lt;p&gt;I'm suffering the same issue when trying to open a mail from the notification center (the little bell)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try opening terminal and type &quot;killall geary&quot; whithout quotes and open geary from the dock/slingshot icon&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2016-02-02T22:45:07.550" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4233" PostTypeId="1" CreationDate="2016-02-03T03:59:54.123" Score="3" ViewCount="144" Body="&lt;p&gt;I want the synergy icon on the left of the download-monitor. Is that possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wish to have all the white icons on the right and the apps on left&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SQoG8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SQoG8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3983" LastEditorUserId="45" LastEditDate="2016-02-03T18:46:18.313" LastActivityDate="2016-02-03T18:46:18.313" Title="How to arrange icons on top panel manually" Tags="|release-freya|wingpanel|settings|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-30T18:02:49.493" ContentLicense="CC BY-SA 3.0" />
  <row Id="4234" PostTypeId="1" CreationDate="2016-02-03T05:06:25.800" Score="3" ViewCount="898" Body="&lt;p&gt;It's been a couple of days since I used Elementary OS and it worked as smooth as possible but then all of a sudden I started having this problem. Whenever I restart or shutdown my notebook, it keeps getting stuck in here where it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*Starting LightDM Display Manager&#xA;*Stopping Send an event to indicate plymouth is up&#xA;[17370.126206] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A &#xA;[17370.126267] [drm:intel_cpu_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Here's a picture of the problem:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/e2swO.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/e2swO.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for helping me out.&lt;/p&gt;&#xA;" OwnerUserId="3987" LastEditorUserId="5565" LastEditDate="2016-10-04T17:00:14.460" LastActivityDate="2018-12-25T08:02:40.580" Title="Shutdown and restart stuck on &quot;Starting LightDM Display Manager&quot;" Tags="|release-freya|boot|system|shutdown|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4235" PostTypeId="1" CreationDate="2016-02-03T06:32:54.377" Score="6" ViewCount="545" Body="&lt;p&gt;I want to edit the wingpanel &lt;strong&gt;calendar applet&lt;/strong&gt; to make it similar to &lt;strong&gt;Gnome calendar&lt;/strong&gt;. I do not want to change the color, rather want to have some spaces between the days and make the current &lt;strong&gt;date selection&lt;/strong&gt; to be &lt;strong&gt;round&lt;/strong&gt; with blue color something like in the picture below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/m09t6.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m09t6.png&quot; alt=&quot;Same like this&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone knows how to do it? At least the file path to that applet.&lt;/p&gt;&#xA;" OwnerUserId="3988" LastEditorUserId="45" LastEditDate="2016-02-03T18:44:06.927" LastActivityDate="2017-07-27T19:32:18.400" Title="How can I edit the wingpanel calendar applet?" Tags="|wingpanel|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4238" PostTypeId="1" AcceptedAnswerId="4239" CreationDate="2016-02-03T12:55:00.033" Score="0" ViewCount="89" Body="&lt;p&gt;After installing elementary os I booted with a live Cd to resize my partition and ever since the boot up is not taking place normally.&#xA;Sometimes it freezes with a blank screen.&#xA;Sometimes it shows errors like something related to busybox etc.&#xA;Please help I am new to elementary OS and I am hating it. &lt;/p&gt;&#xA;" OwnerUserId="3991" LastActivityDate="2016-02-03T13:33:57.683" Title="Problems with bootup" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4239" PostTypeId="2" ParentId="4238" CreationDate="2016-02-03T13:33:57.683" Score="0" Body="&lt;p&gt;it sounds like you broke your installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it's probably going to be easier to reinstall it with correct partitions at this point considering you just installed it so there's nothing to migrate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and you should know that it is impossible for people to help you if you aren't more specific about your error messages. take a picture with your phone if they go past to quick to write.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2016-02-03T13:33:57.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4240" PostTypeId="1" CreationDate="2016-02-03T14:13:45.790" Score="1" ViewCount="82" Body="&lt;p&gt;Good morning community,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already posted my first error experience on: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3976/alt-tab-when-libreoffice-is-open-causes-os-to-crash&quot;&gt;Alt-Tab when LibreOffice is open causes OS to crash&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really don't get it what is happening... Working as a WebDev, with PHPStorm (but also happens with LibreOffice), and while I'm changing windows (or even when I'm just typing) Freya stops responding to everything and can't access anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It just freezes, mouse moves but can't click anywhere, can't access to keyboard shortcuts, can't go to shell terminal, etc. I even had music playing, and when the file ended, it didn't go to the next song.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a clue why this is happening??? Or if there is some kind of error file that I'm not aware???&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance and Best Regards&lt;/p&gt;&#xA;" OwnerUserId="3765" LastEditorUserId="3757" LastEditDate="2016-03-21T04:14:27.523" LastActivityDate="2016-03-21T04:14:27.523" Title="After working a while, Freya freezes every process except mouse" Tags="|release-freya|crash|" AnswerCount="0" CommentCount="0" ClosedDate="2019-12-08T04:20:54.840" ContentLicense="CC BY-SA 3.0" />
  <row Id="4241" PostTypeId="1" CreationDate="2016-02-03T14:29:22.473" Score="0" ViewCount="3745" Body="&lt;p&gt;I have installed the Eclipse IDE and I can't find its icon in application menu. How can I bring it to application menu and dock?&lt;/p&gt;&#xA;" OwnerUserId="3992" LastEditorUserId="45" LastEditDate="2016-02-04T00:12:49.903" LastActivityDate="2016-03-06T17:26:32.680" Title="How can I add Eclipse IDE to the applications menu and dock?" Tags="|plank|slingshot|eclipse|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4243" PostTypeId="2" ParentId="4229" CreationDate="2016-02-03T16:11:34.827" Score="1" Body="&lt;p&gt;just did a DDG search on &quot;ACPI PCC PROBE FAILED&quot;&#xA;and found this page &#xA;&lt;a href=&quot;http://yeites.blogspot.com/2015/05/acpi-pcc-probe-failed-starting-version_29.html&quot; rel=&quot;nofollow&quot;&gt;http://yeites.blogspot.com/2015/05/acpi-pcc-probe-failed-starting-version_29.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From this ... it appears that there could be an SCPI issue ... I dont remember how to do this on a macbook ... but try turning it off and then see if it works &lt;/p&gt;&#xA;&#xA;&lt;p&gt;caveat -- apparently you cannot put to sleep after doing this&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-02-03T16:11:34.827" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4245" PostTypeId="2" ParentId="4205" CreationDate="2016-02-03T19:06:52.113" Score="17" Body="&lt;p&gt;Apps designed for elementary OS save their state and open and close instantly. In this way, there is functionally little difference between close and minimize. You can &lt;a href=&quot;https://old.elementary.io/journal/whats-window-controls&quot; rel=&quot;noreferrer&quot;&gt;read more about the rationale on the elementary blog&lt;/a&gt;. There is also a &lt;a href=&quot;https://old.elementary.io/journal/whats-still-window-controls&quot; rel=&quot;noreferrer&quot;&gt;follow up post&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What can I do instead of minimizing?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is still a way to minimize an application in elementary OS. You can click on the app's icon in the dock and it will minimize.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider simply closing the app. It's [current year] and computers are fast.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the multitasking view. You can use the shortcut in the dock, keyboard shortcuts, or hotcorners to easily access this view. In this way, you can keep vital applications open while maintaining a clean workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I really want to minimize. How can I get the button?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use the Terminal command &lt;code&gt;gsettings&lt;/code&gt; to get under the hood and change the &lt;code&gt;button-layout&lt;/code&gt; settings key. You can play with this command to get lots of different kinds of layouts, but here are the common ones:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a Windows-like layout:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For something like Mac OS X:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close,minimize,maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To revert to the standard layout:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close:maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-02-04T04:10:08.630" LastActivityDate="2016-02-04T04:10:08.630" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4248" PostTypeId="1" CreationDate="2016-02-03T20:07:01.737" Score="1" ViewCount="151" Body="&lt;p&gt;I'm trying to load elementary Freya to run alongside my Mac OS on two of my laptop Mac computers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My two computers are :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;MacBook (13-inch Late 2007) - Intel Core 2 Duo&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;MacBook Pro (15-inch Mid 2009) - Intel Core 2 Duo&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'm using your installation page - &lt;a href=&quot;https://elementary.io/docs/installation#download-elementary-os&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/docs/installation#download-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and following the instruction for Mac OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both my computers are Intel Core 2 Duo and therefore I understand that a bootable USB stick for Freya will not work. So, I have followed the route of downloading your iso for Freya and burning it to DVD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am successful in loading Freya to my older MacBook running Freya alongside the Mac OS section of the HD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I am not able to load Freya to my younger MacBook Pro. In booting from the DVD, as mentioned above, I get the following message showing up against a black screen :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;controller found&#xA;[ 2.028751 ] ACPI PCC probe failed&#xA;[ 2.247927 ] nouveau E[ PDISP ] [ 0000:02:00.0 ] 01:0006:0242: no bios dp data&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and I'm left with a blinking hyphen and there seems no way forward.  I have to force shutdown on the computer to come out of this position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me please ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alastair&lt;/p&gt;&#xA;" OwnerUserId="3994" LastActivityDate="2016-09-07T02:57:48.663" Title="Installation of freya alongside Mac OS using DVD stalls" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4249" PostTypeId="1" CreationDate="2016-02-03T21:24:36.243" Score="2" ViewCount="369" Body="&lt;p&gt;I can only see the bottom half of my top panel now. How can I move it down to its original location?&lt;/p&gt;&#xA;" OwnerDisplayName="user3637" LastActivityDate="2016-03-12T09:28:36.103" Title="My top panel moved up about half of its height, how pull it down?" Tags="|wingpanel|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4250" PostTypeId="2" ParentId="4241" CreationDate="2016-02-03T22:51:40.253" Score="1" Body="&lt;p&gt;You need to create a .desktop file and save it under&#xA;&lt;code&gt;~/.local/share/applications/eclipse.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://askubuntu.com/questions/80013/how-to-pin-eclipse-to-the-unity-launcher&quot;&gt;this thread&lt;/a&gt; for more information.&lt;/p&gt;&#xA;" OwnerUserId="25" LastEditorUserId="3757" LastEditDate="2016-03-06T17:26:32.680" LastActivityDate="2016-03-06T17:26:32.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4251" PostTypeId="1" CreationDate="2016-02-04T01:04:10.637" Score="2" ViewCount="172" Body="&lt;p&gt;I am using elementary OS on Lenovo SL400, it has an inbuilt SD card reader. Elementary OS does not recognize an SD Card. However the same was working under Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Command&lt;/strong&gt;: &lt;code&gt;ls /dev/sd*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda  /dev/sda1  /dev/sda2  /dev/sda5  /dev/sda6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Command&lt;/strong&gt;: &lt;code&gt;df -h&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;S.ficheros     Tamaño Usados  Disp Uso% Montado en&#xA;/dev/sda5         24G    11G   12G  48% /&#xA;udev             980M   4,0K  980M   1% /dev&#xA;tmpfs            198M   924K  198M   1% /run&#xA;none             5,0M      0  5,0M   0% /run/lock&#xA;none             990M    80K  990M   1% /run/shm&#xA;/dev/sda6        122G    69G   47G  60% /home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Command&lt;/strong&gt;: &lt;code&gt;lsusb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&#xA;Bus 005 Device 002: ID 0a5c:2145 Broadcom Corp. BCM2045B (BDC-2.1) [Bluetooth Controller]&#xA;Bus 006 Device 002: ID 09da:022b A4Tech Co., Ltd. Wireless Mouse (Battery Free)&#xA;Bus 006 Device 003: ID 1241:1603 Belkin Keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Command&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)&#xA;    Subsystem: Lenovo Device 20e0&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: agpgart-intel&#xA;&#xA;00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller])&#xA;    Subsystem: Lenovo Device 20e4&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 46&#xA;    Memory at fdc00000 (64-bit, non-prefetchable) [size=4M]&#xA;    Memory at d0000000 (64-bit, prefetchable) [size=256M]&#xA;    I/O ports at 5c00 [size=8]&#xA;    Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: i915&#xA;    Kernel modules: i915&#xA;&#xA;00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)&#xA;    Subsystem: Lenovo Device 20e4&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Memory at fe000000 (64-bit, non-prefetchable) [size=1M]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 16&#xA;    I/O ports at 5880 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 21&#xA;    I/O ports at 5800 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 19&#xA;    I/O ports at 5480 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])&#xA;    Subsystem: Lenovo Device 20f1&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 18&#xA;    Memory at fe1fbc00 (32-bit, non-prefetchable) [size=1K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ehci_hcd&#xA;&#xA;00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)&#xA;    Subsystem: Lenovo Device 20f2&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 47&#xA;    Memory at fe1f4000 (64-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;    Kernel modules: snd-hda-intel&#xA;&#xA;00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0&#xA;    Memory behind bridge: fe200000-fe2fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=03, subordinate=0b, sec-latency=0&#xA;    I/O behind bridge: 00006000-0000dfff&#xA;    Memory behind bridge: fe300000-feafffff&#xA;    Prefetchable memory behind bridge: 00000000fc700000-00000000fcefffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0&#xA;    I/O behind bridge: 0000e000-0000efff&#xA;    Memory behind bridge: feb00000-febfffff&#xA;    Prefetchable memory behind bridge: 00000000fcf00000-00000000fcffffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 23&#xA;    I/O ports at 5400 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 19&#xA;    I/O ports at 5080 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])&#xA;    Subsystem: Lenovo Device 20f0&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 18&#xA;    I/O ports at 5000 [size=32]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])&#xA;    Subsystem: Lenovo Device 20f1&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 23&#xA;    Memory at fe1fb800 (32-bit, non-prefetchable) [size=1K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ehci_hcd&#xA;&#xA;00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode])&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=32&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)&#xA;    Subsystem: Lenovo Device 20f6&#xA;    Flags: bus master, medium devsel, latency 0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel modules: iTCO_wdt&#xA;&#xA;00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])&#xA;    Subsystem: Lenovo Device 20f8&#xA;    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 44&#xA;    I/O ports at 4c00 [size=8]&#xA;    I/O ports at 4880 [size=4]&#xA;    I/O ports at 4800 [size=8]&#xA;    I/O ports at 4480 [size=4]&#xA;    I/O ports at 4400 [size=32]&#xA;    Memory at fe1fb000 (32-bit, non-prefetchable) [size=2K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ahci&#xA;&#xA;02:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)&#xA;    Subsystem: Qualcomm Atheros Device 0035&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 17&#xA;    Memory at fe2f0000 (64-bit, non-prefetchable) [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ath5k&#xA;    Kernel modules: ath5k&#xA;&#xA;0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)&#xA;    Subsystem: Lenovo Device 2108&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 45&#xA;    I/O ports at e800 [size=256]&#xA;    Memory at fcfff000 (64-bit, prefetchable) [size=4K]&#xA;    Memory at fcfe0000 (64-bit, prefetchable) [size=64K]&#xA;    Expansion ROM at febf0000 [disabled] [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: r8169&#xA;    Kernel modules: r8169&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3976" LastEditorUserId="16827" LastEditDate="2019-01-13T09:45:49.127" LastActivityDate="2019-01-13T09:45:49.127" Title="SD Card Reader not recognized on Lenovo SL400" Tags="|hardware|usb-drive|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4252" PostTypeId="2" ParentId="3616" CreationDate="2016-02-04T01:50:42.620" Score="5" Body="&lt;p&gt;Try installing the transitions by running &lt;code&gt;sudo apt-get install libreoffice-ogltrans&lt;/code&gt; in terminal. The transitions should be installed&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-24T05:48:46.477" LastActivityDate="2016-04-24T05:48:46.477" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4254" PostTypeId="2" ParentId="4165" CreationDate="2016-02-04T03:28:30.720" Score="0" Body="&lt;p&gt;Try opening the &quot;Software Updater&quot; app instead of &quot;Software &amp;amp; Updates&quot;. Does a list of updates appear? (After a fresh install of Freya, you should see a bunch of updates.) If you click &quot;Details of Updates&quot;, do you see anything other than &quot;Elementary Base&quot;? If so, those are most likely from trusty-updates or trusty-security.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you answered &quot;yes&quot; to both of those questions, then your updates are working properly, and the Software &amp;amp; Updates app has a UI bug. It's frustrating for sure, but I believe this app is slated to be removed in the next version of Elementary and replaced with Elementary's own software center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The good news is that unless you plan to add third-party PPAs, you can generally ignore the &quot;Software &amp;amp; Updates&quot; app. The fact that Ubuntu has a Software Center &lt;em&gt;and&lt;/em&gt; two different &quot;Software Update&quot; apps drives me bananas, personally! :)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I'm experiencing this issue, &lt;em&gt;and&lt;/em&gt; Software Updater is telling me I have no updates. As far as I can tell, third-party PPAs that I added are misbehaving, and Software &amp;amp; Updates is doing a poor job of explaining exactly what has happened. Here's how I fixed it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the &quot;Software and Updates&quot; application.&lt;/li&gt;&#xA;&lt;li&gt;Go to the &quot;Other Software&quot; tab.&lt;/li&gt;&#xA;&lt;li&gt;Look for third-party PPAs, and disable them. The third-party ones will have a URL (not a name such as &quot;Recommended updates&quot;), and that URL won't start with &lt;code&gt;http://ppa.launchpad.net/elementary-os&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;The checkboxes in the updates tab still won't check. This is totally fine.&lt;/li&gt;&#xA;&lt;li&gt;Run the &quot;Software Updater&quot; application. You should now be able to get updates. If you click &quot;Details of Updates&quot;, you can see the actual packages that will be updated.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Optionally, after things are fixed, go back and re-enable PPAs one by one and see if anything breaks.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Possibly related: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/software-properties/+bug/1470644&quot; rel=&quot;nofollow&quot;&gt;this bug&lt;/a&gt; in Launchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Here's an &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1176595&quot; rel=&quot;nofollow&quot;&gt;Elementary ticket&lt;/a&gt; for this bug. Looks like the bug will be fixed in 0.4.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2016-02-09T20:58:58.547" LastActivityDate="2016-02-09T20:58:58.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4255" PostTypeId="1" CreationDate="2016-02-04T03:47:17.197" Score="1" ViewCount="387" Body="&lt;p&gt;I had Freya 0.3.2 working perfectly recently until I decided to install an AMD driver. After the installation I restarted my computer and all it boots to is a black screen. It goes past the Enter BIOS prompt then shows the Elementary OS logo but after the logo it just goes to a black screen and does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can get into grub cmd line and the grub menu but when I choose elementary OS the same thing happens, if I go to recovery mode it goes to a BlackBox etc command line and no cmd works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: This is probably irrelevant but I have a Raspberry Pi 2 lol, in case I can use it to help me out&lt;/p&gt;&#xA;" OwnerUserId="3949" LastEditorUserId="3949" LastEditDate="2016-02-04T04:04:28.690" LastActivityDate="2016-02-04T04:04:28.690" Title="Boots into blank screen" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T16:09:43.050" ContentLicense="CC BY-SA 3.0" />
  <row Id="4256" PostTypeId="1" CreationDate="2016-02-04T09:49:30.407" Score="7" ViewCount="1118" Body="&lt;p&gt;I just switched from Linux Mint (17.3) to elementary OS (0.3.2 Freya).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Mint, when I double clicked a shell script, I was asked if I wanted to &quot;Run in terminal&quot;, &quot;Display&quot;, &quot;Cancel&quot; or &quot;Run&quot; the script.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tQREy.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tQREy.png&quot; alt=&quot;Run Script Dialog&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I constantly execute scripts by accident because I just double click on them. (At least I think they are being executed but without a terminal.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it somehow possible to get a similar question before running a shell script from Pantheon Files?&lt;/p&gt;&#xA;" OwnerUserId="4000" LastActivityDate="2017-03-07T09:37:51.977" Title="Ask before running script from Pantheon Files" Tags="|release-freya|pantheon-files|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4257" PostTypeId="1" CreationDate="2016-02-04T10:12:35.983" Score="0" ViewCount="716" Body="&lt;p&gt;Can I install, configure and use wordpress to build a website on elementary OS? Please let me know. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="4002" LastEditorUserId="218" LastEditDate="2016-02-04T12:37:49.377" LastActivityDate="2016-02-04T12:42:56.127" Title="Install, configure and use Wordpress in elementary OS" Tags="|software-installation|web-development|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4259" PostTypeId="2" ParentId="4257" CreationDate="2016-02-04T12:42:56.127" Score="1" Body="&lt;p&gt;Definitely!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm assuming that you want to set up a local development environment for WordPress. If you want to set up a public web server, I'd recommend using a server-oriented distribution, or going with a hosted service such as WPEngine or Digital Ocean.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could set up WordPress directly on Elementary, but it's easier and arguably a little cleaner to set it up inside a virtual machine. To do this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Software Center. &lt;/li&gt;&#xA;&lt;li&gt;Search for and install Virtualbox.&lt;/li&gt;&#xA;&lt;li&gt;Search for and install Vagrant.&lt;/li&gt;&#xA;&lt;li&gt;Follow the instructions in &lt;a href=&quot;https://github.com/Varying-Vagrant-Vagrants/VVV#the-first-vagrant-up&quot; rel=&quot;nofollow&quot;&gt;&quot;The first Vagrant Up&quot;&lt;/a&gt; to install VVV, an open source WordPress Vagrant configuration. Start with step 4. (You've already done the first 3 steps!)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-02-04T12:42:56.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4260" PostTypeId="1" AcceptedAnswerId="4262" CreationDate="2016-02-04T13:27:30.387" Score="6" ViewCount="24190" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fdzbw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fdzbw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/I6Ckm.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I6Ckm.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed it from elementary blog and it didn't worked so i deleted repository and build folders but this icon stayed here. I JUST WANT TO KNOW HOW TO PROPERLY REMOVE THIS ?  so that it will save space and want to remove this icon too !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;as you said i went to the location but its not letting me delete the file !&lt;/p&gt;&#xA;" OwnerUserId="3353" LastEditorUserId="3353" LastEditDate="2016-02-04T17:09:39.103" LastActivityDate="2016-02-04T17:09:39.103" Title="how to remove broken application from application menu?" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4261" PostTypeId="2" ParentId="3982" CreationDate="2016-02-04T14:17:45.333" Score="0" Body="&lt;p&gt;I also have this problem, installed fcitx.&lt;/p&gt;&#xA;" OwnerUserId="2829" LastActivityDate="2016-02-04T14:17:45.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4262" PostTypeId="2" ParentId="4260" CreationDate="2016-02-04T14:32:35.937" Score="9" Body="&lt;p&gt;I do not know the app. If you cannot remove the app in software center or via &lt;code&gt;sudo apt-get remove &amp;lt;feedreader&amp;gt;&lt;/code&gt; you have to remove the files manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next is just for the icon / entry in application menu:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably you have a feedreader.desktop file either in &lt;code&gt;/usr/share/applications&lt;/code&gt; or in &lt;code&gt;~/.local/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you delete the file(s) the entry will disappear. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to delete the icon from disk, you should open the feedreader.deskop file. There you will find a line &lt;code&gt;Icon=/path/to/icon&lt;/code&gt;. Delete the icon file. &lt;strong&gt;I would not recommend to delete the icon&lt;/strong&gt; because it seems to be a universal used icon for RSS programs.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-04T14:32:35.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4263" PostTypeId="1" CreationDate="2016-02-04T15:46:13.583" Score="3" ViewCount="1561" Body="&lt;p&gt;I am using the latest elementary OS build 0.3.2. &#xA;I need a screen resolution of 1280x800_60.00. &#xA;I can set the desired screen resolution using xrandr.&#xA;This change is only temporary and disappears upon reboot.&#xA;How do I set the 1280x800_60.00 screen resolution as permanent?&#xA;I have searched the web and tried various suggestions for this with no success.&lt;/p&gt;&#xA;" OwnerUserId="4007" LastActivityDate="2016-09-02T00:39:30.863" Title="How do I set a custom screen resolution as permanent?" Tags="|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4264" PostTypeId="1" CreationDate="2016-02-04T16:39:35.370" Score="1" ViewCount="750" Body="&lt;p&gt;I am getting the same error after executing every command in &lt;code&gt;tmux&lt;/code&gt; and after running it, and this is annoying:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-bash: PROMPT_COMMAND: line 0: syntax error near unexpected token `;;'&#xA;-bash: PROMPT_COMMAND: line 0: `preexec_set_exit;__bp_precmd_invoke_cmd; dbus-send --type=method_call --session --dest=net.launchpad.pantheon-terminal /net/launchpad/pantheon_terminal org.pantheon.terminal.ProcessFinished string:$PANTHEON_TERMINAL_ID string:&quot;$(history 1 | cut -c 8-)&quot; &amp;gt;/dev/null 2&amp;gt;&amp;amp;1;  __bp_interactive_mode;;preexec_invoke_cmd'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Though when I am using just &lt;code&gt;bash&lt;/code&gt;, I am not getting this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can cause such behaviour?&lt;/p&gt;&#xA;" OwnerUserId="946" LastEditorUserId="946" LastEditDate="2016-02-04T16:47:25.407" LastActivityDate="2017-04-18T11:44:31.827" Title="Syntax error after running every command in tmux" Tags="|command-line|bash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4266" PostTypeId="2" ParentId="4263" CreationDate="2016-02-04T20:22:49.970" Score="1" Body="&lt;p&gt;You can run the command each time you log in by adding it to &lt;code&gt;~/.profile&lt;/code&gt;. See &lt;a href=&quot;https://askubuntu.com/a/270050&quot;&gt;this answer&lt;/a&gt; for more info.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm assuming here that this resolution doesn't appear in Display settings because it isn't a native resolution of your monitor. (If it &lt;em&gt;does&lt;/em&gt; appear in display settings, using that would be the easiest way to make the change.)&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-02-04T20:22:49.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4267" PostTypeId="1" AcceptedAnswerId="4268" CreationDate="2016-02-05T00:36:55.100" Score="3" ViewCount="982" Body="&lt;p&gt;I have recently installed a Nvidia GTX 970, and from there on I could only select a tiny resolution under elementary.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-04-01T21:23:07.187" Title="How do I install the drivers for my Nvidia GTX 970?" Tags="|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4268" PostTypeId="2" ParentId="4267" CreationDate="2016-02-05T00:36:55.100" Score="3" Body="&lt;p&gt;First we should probably blacklist anything that could conflict. You don't have to do this, but a bad update later might do some damage otherwise.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At the end of the file add the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blacklist nouveau&#xA;blacklist nvidiafb&#xA;blacklist rivafb&#xA;blacklist rivatv&#xA;blacklist vga16fb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then simply run the following commands.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-375&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can check this is working with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lewis@Comrade-Loki:~$ nvidia-smi&#xA;Sat Apr  1 22:22:55 2017       &#xA;+-----------------------------------------------------------------------------+&#xA;| NVIDIA-SMI 375.39                 Driver Version: 375.39                    |&#xA;|-------------------------------+----------------------+----------------------+&#xA;| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |&#xA;| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |&#xA;|===============================+======================+======================|&#xA;|   0  GeForce GTX 970     Off  | 0000:01:00.0      On |                  N/A |&#xA;|  9%   58C    P5    26W / 200W |   1171MiB /  4036MiB |     11%      Default |&#xA;+-------------------------------+----------------------+----------------------+&#xA;&#xA;+-----------------------------------------------------------------------------+&#xA;| Processes:                                                       GPU Memory |&#xA;|  GPU       PID  Type  Process name                               Usage      |&#xA;|=============================================================================|&#xA;|    0      1118    G   /usr/lib/xorg/Xorg                             419MiB |&#xA;|    0      2413    G   gala                                           245MiB |&#xA;|    0      3541    G   ...s-passed-by-fd --v8-snapshot-passed-by-fd   503MiB |&#xA;|    0     13387    G   /usr/bin/nvidia-settings                         0MiB |&#xA;+-----------------------------------------------------------------------------+&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2017-04-01T21:23:07.187" LastActivityDate="2017-04-01T21:23:07.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4269" PostTypeId="1" CreationDate="2016-02-05T01:12:49.827" Score="3" ViewCount="1089" Body="&lt;p&gt;I was wondering if there is any way to get Geary to spell check in a foreign language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS - Freya; Geary version - 0.10.0; User level - Rookie.&lt;/p&gt;&#xA;" OwnerUserId="4014" LastActivityDate="2019-04-25T19:18:03.863" Title="Geary Spelling Checker for Foreign Language" Tags="|pantheon-mail|language|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4270" PostTypeId="1" CreationDate="2016-02-05T03:16:34.047" Score="3" ViewCount="2329" Body="&lt;p&gt;I installed elementary OS Freya 0.3.2 on my ASUS X200MA, run all the updates. I wanted to activate two-finger scroll, ticked the option in the mouse and trackpad system settings. But it doesn't work. I re-entered the system settings, and it doesn't save the option that I'd ticked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it a kernel problem, or a problem derived from its 14.04 Ubuntu base?&#xA;Because the two finger-scroll is working well in, let's say, Ubuntu 15.10 and all its derivatives.&lt;/p&gt;&#xA;" OwnerUserId="2281" LastActivityDate="2016-10-29T12:17:04.773" Title="Two-finger Scroll is not working for my touchpad of ASUS X200MA" Tags="|touchpad|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4271" PostTypeId="2" ParentId="4256" CreationDate="2016-02-05T04:53:07.917" Score="5" Body="&lt;p&gt;From what I can tell this dialogue is built into nemo and caja so no, not from pantheon files. you could try another filebrowser (there's lots), or file a bug on &lt;a href=&quot;https://launchpad.net/pantheon-files/+bugs&quot; rel=&quot;noreferrer&quot;&gt;the bug tracker&lt;/a&gt; (seeing this dialogue every day would be my personal hell though so ask for a gsettings key).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the mean time you could hack around it with this script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;zenity --question --text=&quot;Do you wish to run '$1', or display its contents?&quot; \&#xA;       --ok-label=Run \&#xA;       --cancel-label=Edit&#xA;&#xA;case $? in&#xA;    0)pantheon-terminal -e &quot;$1&quot;&#xA;    ;;&#xA;    1)scratch-text-editor $1&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;although I'm not sure it works properly outside of the terminal and I'm not sure of the best way to make it the default way to open shell scripts.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2016-02-05T04:53:07.917" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="4272" PostTypeId="1" CreationDate="2016-02-05T05:01:04.330" Score="3" ViewCount="130" Body="&lt;p&gt;0.6470901 ACPI PCC probe failed. &#xA;This is the message which I get while booting up.&#xA;I really love the Distro because of it's GUI but it is causing me way too many problems.&#xA;Can someone please help me.&#xA;UPDATE: I read about a software called &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;Boot Repairs.&lt;/a&gt;&#xA;Will it be helpful in solving the problem?&lt;/p&gt;&#xA;" OwnerUserId="3991" LastEditorUserId="3991" LastEditDate="2016-02-05T08:27:33.790" LastActivityDate="2016-09-02T17:51:08.937" Title="Acpi PCC Probe failed message during bootup" Tags="|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4273" PostTypeId="2" ParentId="4272" CreationDate="2016-02-05T07:19:04.033" Score="1" Body="&lt;p&gt;Just ignore the message if your PC boots correctly. I also get this message on all distros. If you computer doesn't boot it is another problem. Don't down vote this because your PC doesn't boot since that is not related to this harmless message&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-02-05T13:03:27.993" LastActivityDate="2016-02-05T13:03:27.993" CommentCount="19" ContentLicense="CC BY-SA 3.0" />
  <row Id="4274" PostTypeId="1" AcceptedAnswerId="4282" CreationDate="2016-02-05T13:38:28.713" Score="2" ViewCount="298" Body="&lt;p&gt;After doing a package update I get a 404 error when it's trying to fetch &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/dists/freya/main/binary-i386/Packages&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/dists/freya/main/binary-i386/Packages&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I solve that missing dependency?&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-02-05T23:03:44.650" Title="Missing index files from elementary repo" Tags="|updates|apt|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4275" PostTypeId="1" CreationDate="2016-02-05T13:45:56.260" Score="3" ViewCount="70" Body="&lt;p&gt;I have a shutdown problem similar to this one: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2783/freya-cannot-shutdown-init-wait-for-state-plymouth-shutdownlightdm-killed-by-t&quot;&gt;Freya cannot shutdown. init: wait for state plymouth shutdownlightdm killed by TERM signal&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is plenty of output before the final line when the shutdown process stops that I can see for a split second only (there also seems to be a compatibility/driver issue with the AMD graphics card). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's impossible to write down the output, so I'd like to take screenshots during the shutdown process before posting my question here. Is that possible and if yes, how? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-03-06T18:14:55.580" Title="How to take screenshots at shutdown?" Tags="|release-freya|shutdown|screenshot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4276" PostTypeId="1" CreationDate="2016-02-05T15:04:31.853" Score="1" ViewCount="83" Body="&lt;p&gt;I accidentally moved &lt;code&gt;/etc&lt;/code&gt; to &lt;code&gt;/home/etc&lt;/code&gt;. I fixed that via putting &lt;code&gt;init=/bin/bash&lt;/code&gt; in the boot commands, booted, and dropped into a shell with an (initramfs) prompt, where I then did &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cryptsetup luksOpen /dev/sda5 sda5&#xA;mkdir -p /mnt/sda5&#xA;mount /dev/mapper/elementary--root-vg /mnt/sda5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and moved &lt;code&gt;/home/etc&lt;/code&gt; back to &lt;code&gt;/etc&lt;/code&gt;. Now when I try to boot I get an error along the lines of&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cannot find file /dev/mapper/elementary--root-vg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What would be the next step?&lt;/p&gt;&#xA;" OwnerUserId="3743" LastEditorUserId="4019" LastEditDate="2016-02-05T16:28:39.170" LastActivityDate="2016-02-05T16:28:39.170" Title="Not able to boot OS" Tags="|grub|filesystem|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4277" PostTypeId="2" ParentId="4256" CreationDate="2016-02-05T16:05:32.730" Score="1" Body="&lt;p&gt;I'm not sure if it is possible with Pantheon Files, but if you're willing to use the regular Nautilus instead (which is actually very similar to Pantheon Files) there's an easy way to configure it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install Nautilus&lt;/li&gt;&#xA;&lt;li&gt;to make Nautilus visible in Slingshot follow instructions here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2994/why-dont-certain-gnome-apps-show-in-slingshot&quot;&gt;Why don&amp;#39;t certain GNOME apps show in Slingshot?&lt;/a&gt; (don't get confused, both Pantheon Files and Nautilus will be called &quot;Files&quot; in Slingshot. In my system, Nautilus would be the first of the two icons, I guess because it's sorted alphabetically)&lt;/li&gt;&#xA;&lt;li&gt;install the dconf-editor (e.g. via Software Center)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Open dconf and you'll have plenty of settings usually hidden in the system settings. The path is org &gt; gnome &gt; nautilus &gt; preferences. There you'll find an option called &quot;executable-text-activation&quot;. Clicking on the value you'll get three options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&quot;launch&quot; will directly launch the shell script. This would be your current setting&lt;/li&gt;&#xA;&lt;li&gt;&quot;display&quot; will always display the script in a text editor&lt;/li&gt;&#xA;&lt;li&gt;&quot;ask&quot; will run the prompt you're familiar to from Mint - this is the option you're looking for &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-02-05T16:05:32.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4278" PostTypeId="2" ParentId="4270" CreationDate="2016-02-05T16:45:13.397" Score="2" Body="&lt;p&gt;If you use synaptics driver you will probably have the synclient program installed. In terminal have a look at your current touchpad settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ synclient -l | sort&lt;/code&gt;&#xA;(Of course it will show the settings without the &quot;sort&quot; - but it is much easier to find settings when they are listed in alphabetically order)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will get a list with many settings. We are interested in the option &quot;VertTwoFingerScroll&quot;. If the output is &quot;VertTwoFingerScroll = 0&quot; the option is disabled. To enable try&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ synclient VertTwoFingerScroll=1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-05T16:45:13.397" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4279" PostTypeId="2" ParentId="4275" CreationDate="2016-02-05T17:36:57.107" Score="1" Body="&lt;p&gt;You wont be able to take an actual screenshot, although if the error occurs early enough in the shutdown process (before the logger service is stopped and the hdd's have been unmounted) it should be visible in your logs via &lt;code&gt;less /var/log/syslog&lt;/code&gt;. If you can't see anything obvious, &lt;a href=&quot;https://unix.stackexchange.com/questions/53252/how-to-read-the-messages-during-power-off&quot;&gt;these answers&lt;/a&gt; show various ways to enable more thorough logging. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternately I suppose it is probably easier to just use a camera. ;p&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2016-02-05T17:36:57.107" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4281" PostTypeId="1" AcceptedAnswerId="4848" CreationDate="2016-02-05T22:20:06.867" Score="5" ViewCount="1284" Body="&lt;p&gt;I have a brand new &lt;strong&gt;Dell Inspiron 15 (5559)&lt;/strong&gt; laptop with an &lt;strong&gt;Intel Skylake i7-6500U&lt;/strong&gt; CPU and an &lt;strong&gt;AMD Radeon R5 M335&lt;/strong&gt; graphics card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation of &lt;strong&gt;freya 0.3.2&lt;/strong&gt; seems to have worked quickly and without problems. However, I cannot shutdown the system without having to use the power button. The problem looks similar to this one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2783/freya-cannot-shutdown-init-wait-for-state-plymouth-shutdownlightdm-killed-by-t&quot;&gt;Freya cannot shutdown. init: wait for state plymouth shutdownlightdm killed by TERM signal&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;because the last line of output is essentially the same. I've tried this fix&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://michalorman.com/2013/10/fix-ubuntu-freeze-during-restart/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://michalorman.com/2013/10/fix-ubuntu-freeze-during-restart/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which seemed on point, but it didn't work. Now I suspect it might have to do with the graphics card (not sure though) because when I shut down the machine, the following happens:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;for a split second, there is a graphical glitch - it looks like a rectangular part of the desktop wallpaper is moved and shifted (you can see how it looks like here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1548/elementary-os-freezes-when-trying-to-reboot-shutdown&quot;&gt;elementary OS freezes when trying to reboot / shutdown?&lt;/a&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the following screen appears:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/joYFx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/joYFx.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;after a split second, the next screen appears:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/E37u2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E37u2.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There the shutdown process stops. When I hit the power button, the machine powers down (I don't have to hold the button), and the output looks like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/LCVT9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LCVT9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I have used the &lt;strong&gt;Xorg open source drivers for AMD&lt;/strong&gt; cards that came with freya, although the system mistakenly identifies the graphics card as being an AMD Sun XT (Radeon HD 8600M series). When I switched to the proprietary fglrx driver that shipped with the system, I could merely boot into a black screen with a colored line at the top. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Irrespectively of the AMD drivers, when I have a look at the info tab in the system settings, it says &quot;Graphics: &lt;strong&gt;Intel Corporation Device 1916 (rev 07)&lt;/strong&gt;&quot;. When I run &lt;strong&gt;lspci -nn | grep VGA&lt;/strong&gt;, the output is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:1916] (rev 07)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem also occurs at &lt;strong&gt;logout&lt;/strong&gt;, but in this case the process stops at the screen in the first picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? I'm a bit confused...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have experienced the shutdown/logout to stop at the first graphical glitch without going to the output screens, too. In that case, I have to force quit and power down by holding the power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 2:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now there's an error message at startup that seems to be related to the problem. The error description looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xEySx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xEySx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Iqagq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iqagq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/LMnRM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LMnRM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fvWEZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fvWEZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The entry under &quot;Unreportable Reason&quot; (strangely the only one in German) translates to: &quot;This is not an official elementary package. Please remove all third-party packages and repeat the process&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 3:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought fglrx drivers had been included in the system installation because in the additional drivers tab I had these options: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ux2dF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ux2dF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, searching for fglrx in synaptic revealed that apparently there are no such driver packages installed:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rYgUi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rYgUi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the problem might as well be related to the Intel graphics chipset that apparently is run right now?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-26T13:07:13.670" Title="Dell Inspiron 15 5559 Problem at shutdown and logout (Intel Skylake)" Tags="|release-freya|graphic-drivers|shutdown|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4282" PostTypeId="2" ParentId="4274" CreationDate="2016-02-05T23:03:44.650" Score="2" Body="&lt;p&gt;The &quot;FREYA&quot; distribution doesn't exist at ppa:elementary-os/os-patches repository. The correct name is &quot;TRUSTY&quot;. To change this you can launch &quot;Software and updates&quot;, searching it on Slingshot launcher, or from terminal with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;software-properties-gtk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once launch it, go to &quot;Other software&quot; tab and search for &quot;elementary os-patches&quot; repository url. Edit it and change the &quot;Distribution&quot; field with &quot;trusty&quot;. Accept changes and close software-properties-gtk.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wait for update the cache and error will be corrected.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-05T23:03:44.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4283" PostTypeId="1" CreationDate="2016-02-06T10:55:14.733" Score="1" ViewCount="1525" Body="&lt;p&gt;How can I install my Epson xp 322 printer? The regular way doesn't work. After the pop up &quot;lookng for a driver&quot; nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stefan, Norway&lt;/p&gt;&#xA;" OwnerUserId="4026" LastActivityDate="2020-11-01T18:43:26.033" Title="Install Epson printer" Tags="|software-installation|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4285" PostTypeId="1" AcceptedAnswerId="4291" CreationDate="2016-02-06T11:40:16.067" Score="1" ViewCount="162" Body="&lt;p&gt;I'm trying to compile the appcenter package from launchpad, I've downloaded it by the bzr command, then I installed the required dependencies and ran the cmake command but when I try to compile it doesn't complete the compilation and the output is :-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/username/appcenter/src/Core/Client.vala:45.9-45.48: warning: unhandled error `GLib.Error'&#xA;        appstream_database.get_all_components ().foreach ((comp) =&amp;gt; {&#xA;        ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Core/Client.vala:271.21-271.73: warning: unhandled error `GLib.Error'&#xA;        var comps = appstream_database.find_components (null, categories);&#xA;                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Core/Client.vala:292.21-292.68: warning: unhandled error `GLib.Error'&#xA;        var comps = appstream_database.find_components (query, null);&#xA;                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Core/Client.vala:60.9-60.34: warning: unhandled error `GLib.Error'&#xA;        appstream_database.open ();&#xA;        ^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Views/AppListView.vala:53.30-53.54: error: The name `AlertView' does not exist in the context of `Granite.Widgets'&#xA;        var alert_view = new Granite.Widgets.AlertView (_(&quot;No Results&quot;), _(&quot;No apps could be found.&quot;), &quot;dialog-information&quot;);&#xA;                             ^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Views/AppListView.vala:53.13-53.124: error: var declaration not allowed with non-typed initializer&#xA;        var alert_view = new Granite.Widgets.AlertView (_(&quot;No Results&quot;), _(&quot;No apps could be found.&quot;), &quot;dialog-information&quot;);&#xA;            ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;/home/username/appcenter/src/Views/AppListView.vala:54.9-54.18: error: The name `alert_view' does not exist in the context of `AppCenter.Views.AppListView'&#xA;        alert_view.show_all ();&#xA;        ^^^^^^^^^^&#xA;/home/username/appcenter/src/Views/AppListView.vala:58.35-58.44: error: The name `alert_view' does not exist in the context of `AppCenter.Views.AppListView'&#xA;        list_box.set_placeholder (alert_view);&#xA;                                  ^^^^^^^^^^&#xA;src/CMakeFiles/appcenter.dir/build.make:127: recipe for target 'src/appcenter_valac.stamp' failed&#xA;make[2]: *** [src/appcenter_valac.stamp] Error 1&#xA;CMakeFiles/Makefile2:172: recipe for target 'src/CMakeFiles/appcenter.dir/all' failed&#xA;make[1]: *** [src/CMakeFiles/appcenter.dir/all] Error 2&#xA;Makefile:116: recipe for target 'all' failed&#xA;make: *** [all] Error 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am running ubuntu 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="4027" LastEditorUserId="45" LastEditDate="2016-02-06T16:04:12.317" LastActivityDate="2016-02-06T16:04:12.317" Title="Compiling AppCenter on Ubuntu 16.04 fails at &quot;AlertView&quot;" Tags="|software-installation|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4287" PostTypeId="1" CreationDate="2016-02-06T12:19:08.513" Score="2" ViewCount="67" Body="&lt;p&gt;I got a strange problem, because when I want plug my phone (Android 5.1) to my laptop with Elementary OS 0.3.2 Freya everything is works, but when I disconnect from internet and try to plug my device Elementary cannot show me my files on phone (Unable to Mount Folder).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help.&lt;/p&gt;&#xA;" OwnerUserId="2643" LastActivityDate="2016-02-06T12:19:08.513" Title="Elementary cannot see phone while there is no internet connection" Tags="|usb-drive|android|" AnswerCount="0" CommentCount="0" ClosedDate="2016-09-27T21:27:41.823" ContentLicense="CC BY-SA 3.0" />
  <row Id="4288" PostTypeId="1" AcceptedAnswerId="4290" CreationDate="2016-02-06T13:08:23.457" Score="2" ViewCount="774" Body="&lt;p&gt;So I've made this .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Team Speak 3&#xA;Comment=TS&#xA;Exec=&quot;/home/nicolas/Programs/TeamSpeak3-Client-linux_amd64/ts3client_runscript.sh&quot;&#xA;Path=&quot;/home/nicolas/Programs/TeamSpeak3-Client-linux_amd64/&quot;&#xA;Icon=/usr/share/icons/elementary/apps/128/office-address-book.svg&#xA;Type=Application&#xA;Categories=Application;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then I've saved it in &lt;code&gt;~/.local/share/applications&lt;/code&gt; and gave execute permissions (just for my user, 774). I can open that program if I go to that folder and run the file but if I open it from the Applications menu it doesn't work. How can I make it work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just to be clear: I can see my desktop file in Applications menu. But when I click it, nothing happens.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-02-07T10:01:59.843" Title="When I add a .desktop file to ~/.local/share/applications it appears but doesn't open from Applications menu" Tags="|applications|menu|app-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4290" PostTypeId="2" ParentId="4288" CreationDate="2016-02-06T14:35:15.287" Score="4" Body="&lt;p&gt;so @shrestha_aj has the answer: I just needed to remove the quotes from Exec and Path. Like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Team Speak 3&#xA;Comment=TS&#xA;Exec=/home/nicolas/Programs/TeamSpeak3-Client-linux_amd64/ts3client_runscript.sh&#xA;Path=/home/nicolas/Programs/TeamSpeak3-Client-linux_amd64/&#xA;Icon=office-address-book&#xA;Type=Application&#xA;Categories=Application;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2016-02-07T10:01:59.843" LastActivityDate="2016-02-07T10:01:59.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4291" PostTypeId="2" ParentId="4285" CreationDate="2016-02-06T16:03:01.617" Score="1" Body="&lt;p&gt;You're missing the latest version of Granite which contains the AlertView widget. You'll need to build it from &lt;code&gt;lp:granite&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-02-06T16:03:01.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4292" PostTypeId="2" ParentId="2732" CreationDate="2016-02-06T18:36:10.283" Score="0" Body="&lt;p&gt;This appears to be a change in behaviour between Luna and Freya. I recently installed Freya on a new disk after using Luna for a couple of years and I find myself missing the Luna style workspace. If I drag an app to a particular workspace, I expect it to stay there and only there. That was the default bahaviour in Luna. In Freya it appears to be as you explain very well and that defeats the purpose of multiple workpaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I would consider this a bug, but it may have been an overlooked design feature from Luna's desktop implementation that didn't make its way (yet?) to Freya. In my view, all attached displays should be part of a unified desktop and considered a single workspace.&lt;/p&gt;&#xA;" OwnerUserId="2522" LastActivityDate="2016-02-06T18:36:10.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4293" PostTypeId="2" ParentId="4283" CreationDate="2016-02-06T19:04:54.047" Score="1" Body="&lt;p&gt;Download the printer packages and install:&#xA;ESC/P-R Driver (generic driver), Epson Printer Utility.&#xA;Then, open a terminal and go to the folder containing the downloaded files:&#xA;1°:ls&#xA;2:cd Download&#xA;3°: sudo dpkg -i epson-printer-utility_1.0.0-1lsb3.2_amd64.deb, for example.&#xA;After instalation, open System Tools, click printers and add printer.&#xA;Search for the correct driver and install it.&#xA;Probably the printer is already installed.&lt;/p&gt;&#xA;" OwnerUserId="3977" LastActivityDate="2016-02-06T19:04:54.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4294" PostTypeId="1" CreationDate="2016-02-07T02:00:45.727" Score="4" ViewCount="5465" Body="&lt;p&gt;I can't open the Software Center - it simply doesn't launch. No errors or anything pop up when I try to run it from Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an error in the topbar that looks like the red stop sign in this. I think it may be the cause of the issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xe1aT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xe1aT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've had this error for over a month, but haven't been able to get it to disappear yet. I've just run the following commands with no errors, and they all completed successfully:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Yet after running those and rebooting, I still have the same error in the topbar. When I first boot it doesn't show, but after about 30 seconds to around 1 minute it does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can also run also successfully run all the items in the error dropdown, like &lt;code&gt;Show updates&lt;/code&gt;, &lt;code&gt;Install all updates&lt;/code&gt;, &lt;code&gt;Check for updates&lt;/code&gt; and &lt;code&gt;Start package manager&lt;/code&gt; successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run &lt;code&gt;software-center&lt;/code&gt; from the command-line, I do get errors and useful output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;de@dust:~$ software-center&#xA;&#xA;** (software-center:4322): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-IDTKNudikr: Connection refused&#xA;ERROR:root:DebFileApplication import&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/__init__.py&quot;, line 4, in &amp;lt;module&amp;gt;&#xA;from debfile import DebFileApplication, DebFileOpenError&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/debfile.py&quot;, line 25, in &amp;lt;module&amp;gt;&#xA;from softwarecenter.db.application import Application, AppDetails&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/application.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;import softwarecenter.distro&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 208, in &amp;lt;module&amp;gt;&#xA;distro_instance = _get_distro()&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 183, in _get_distro&#xA;module = __import__(distro_module_name, globals(), locals(), [], -1)&#xA;ImportError: No module named elementary os&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-center&quot;, line 128, in &amp;lt;module&amp;gt;&#xA;from softwarecenter.ui.gtk3.app import SoftwareCenterAppGtk3&#xA;  File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 54, in &amp;lt;module&amp;gt;&#xA;from softwarecenter.db.application import Application&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/application.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;import softwarecenter.distro&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 208, in &amp;lt;module&amp;gt;&#xA;distro_instance = _get_distro()&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 183, in _get_distro&#xA;module = __import__(distro_module_name, globals(), locals(), [], -1)&#xA;ImportError: No module named elementary os&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I solve this? I need Software Centre running so that I can install .deb files again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As requested by @sale, here's the useful output of some commands:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;sudo apt-get update&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ign http://au.archive.ubuntu.com trusty InRelease&#xA;Get:1 http://au.archive.ubuntu.com trusty-updates InRelease [64.4 kB]          &#xA;Ign http://dl.google.com stable InRelease                                      &#xA;Hit http://repo.steampowered.com precise InRelease                             &#xA;Ign http://archive.canonical.com trusty InRelease                              &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:2 http://security.ubuntu.com trusty-security InRelease [64.4 kB]           &#xA;Get:3 http://au.archive.ubuntu.com trusty-backports InRelease [64.5 kB]        &#xA;Hit http://repository.spotify.com stable InRelease                             &#xA;Get:4 http://au.archive.ubuntu.com trusty-proposed InRelease [212 kB]          &#xA;Hit http://repo.steampowered.com precise/steam Sources                         &#xA;Hit http://archive.canonical.com trusty Release.gpg                            &#xA;Ign http://dl.google.com stable InRelease                                      &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://au.archive.ubuntu.com trusty Release.gpg                            &#xA;Hit http://repository.spotify.com stable/non-free amd64 Packages               &#xA;Hit http://dl.google.com stable Release.gpg                                    &#xA;Get:5 http://au.archive.ubuntu.com trusty-updates/main Sources [250 kB]        &#xA;Hit http://repo.steampowered.com precise/steam amd64 Packages                  &#xA;Hit http://archive.canonical.com trusty Release                                &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://repository.spotify.com stable/non-free i386 Packages                &#xA;Hit http://archive.canonical.com trusty/partner Sources                        &#xA;Hit http://repo.steampowered.com precise/steam i386 Packages                   &#xA;Get:6 http://security.ubuntu.com trusty-security/multiverse Sources [2,350 B]  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release.gpg                                    &#xA;Get:7 http://au.archive.ubuntu.com trusty-updates/restricted Sources [5,359 B] &#xA;Hit http://archive.canonical.com trusty/partner amd64 Packages                 &#xA;Hit http://dl.google.com stable Release                                        &#xA;Get:8 http://security.ubuntu.com trusty-security/multiverse amd64 Packages [4,797 B]&#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:9 http://au.archive.ubuntu.com trusty-updates/universe amd64 Packages [336 kB]&#xA;Hit http://archive.canonical.com trusty/partner i386 Packages                  &#xA;Get:10 http://security.ubuntu.com trusty-security/multiverse i386 Packages [4,976 B]&#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://archive.canonical.com trusty/partner Translation-en                 &#xA;Hit http://dl.google.com stable Release                                        &#xA;Get:11 http://security.ubuntu.com trusty-security/multiverse Translation-en [2,437 B]&#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable/main amd64 Packages                            &#xA;Get:12 http://au.archive.ubuntu.com trusty-updates/multiverse amd64 Packages [13.0 kB]&#xA;Get:13 http://au.archive.ubuntu.com trusty-updates/main amd64 Packages [696 kB]&#xA;Ign http://repository.spotify.com stable/non-free Translation-en_AU            &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://repository.spotify.com stable/non-free Translation-en               &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable/main i386 Packages                             &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Get:14 http://au.archive.ubuntu.com trusty-updates/restricted amd64 Packages [15.9 kB]&#xA;Get:15 http://au.archive.ubuntu.com trusty-updates/universe i386 Packages [337 kB]&#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Get:16 http://au.archive.ubuntu.com trusty-updates/multiverse i386 Packages [13.2 kB]&#xA;Get:17 http://au.archive.ubuntu.com trusty-updates/main i386 Packages [671 kB] &#xA;Hit http://dl.google.com stable/main amd64 Packages                            &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://dl.google.com stable/main i386 Packages                             &#xA;Get:18 http://au.archive.ubuntu.com trusty-updates/restricted i386 Packages [15.6 kB]&#xA;Ign http://repo.steampowered.com precise/steam Translation-en_AU               &#xA;Get:19 http://au.archive.ubuntu.com trusty-updates/main Translation-en [352 kB]&#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Ign http://repo.steampowered.com precise/steam Translation-en                  &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Get:20 http://au.archive.ubuntu.com trusty-updates/multiverse Translation-en [6,832 B]&#xA;Get:21 http://au.archive.ubuntu.com trusty-updates/restricted Translation-en [3,699 B]&#xA;Get:22 http://au.archive.ubuntu.com trusty-updates/universe Translation-en [179 kB]&#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Get:23 http://au.archive.ubuntu.com trusty-backports/main Sources [8,236 B]    &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Get:24 http://au.archive.ubuntu.com trusty-backports/restricted Sources [28 B] &#xA;Get:25 http://au.archive.ubuntu.com trusty-backports/universe Sources [33.2 kB]&#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Get:26 http://au.archive.ubuntu.com trusty-backports/multiverse Sources [1,898 B]&#xA;Get:27 http://au.archive.ubuntu.com trusty-backports/universe amd64 Packages [39.8 kB]&#xA;Get:28 http://au.archive.ubuntu.com trusty-backports/multiverse amd64 Packages [1,571 B]&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Get:29 http://au.archive.ubuntu.com trusty-backports/main amd64 Packages [9,391 B]&#xA;Get:30 http://au.archive.ubuntu.com trusty-backports/restricted amd64 Packages [28 B]&#xA;Get:31 http://au.archive.ubuntu.com trusty-backports/universe i386 Packages [39.8 kB]&#xA;Get:32 http://au.archive.ubuntu.com trusty-backports/multiverse i386 Packages [1,552 B]&#xA;Get:33 http://au.archive.ubuntu.com trusty-backports/main i386 Packages [9,442 B]&#xA;Get:34 http://au.archive.ubuntu.com trusty-backports/restricted i386 Packages [28 B]&#xA;Hit http://au.archive.ubuntu.com trusty-backports/main Translation-en          &#xA;Hit http://au.archive.ubuntu.com trusty-backports/multiverse Translation-en    &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://au.archive.ubuntu.com trusty-backports/restricted Translation-en    &#xA;Hit http://au.archive.ubuntu.com trusty-backports/universe Translation-en      &#xA;Get:35 http://au.archive.ubuntu.com trusty-proposed/universe amd64 Packages [23.6 kB]&#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Get:36 http://au.archive.ubuntu.com trusty-proposed/multiverse amd64 Packages [28 B]&#xA;Get:37 http://au.archive.ubuntu.com trusty-proposed/main amd64 Packages [148 kB]&#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Get:38 http://au.archive.ubuntu.com trusty-proposed/restricted amd64 Packages [3,655 B]&#xA;Get:39 http://au.archive.ubuntu.com trusty-proposed/universe i386 Packages [23.4 kB]&#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Get:40 http://au.archive.ubuntu.com trusty-proposed/multiverse i386 Packages [733 B]&#xA;Get:41 http://au.archive.ubuntu.com trusty-proposed/main i386 Packages [144 kB]&#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Get:42 http://au.archive.ubuntu.com trusty-proposed/restricted i386 Packages [3,661 B]&#xA;Hit http://au.archive.ubuntu.com trusty-proposed/main Translation-en_AU        &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/main Translation-en           &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/multiverse Translation-en_AU  &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/multiverse Translation-en     &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/restricted Translation-en_AU  &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/restricted Translation-en     &#xA;Hit http://au.archive.ubuntu.com trusty-proposed/universe Translation-en       &#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Hit http://au.archive.ubuntu.com trusty Release                                &#xA;Hit http://au.archive.ubuntu.com trusty/main Sources                           &#xA;Hit http://au.archive.ubuntu.com trusty/restricted Sources                     &#xA;Hit http://au.archive.ubuntu.com trusty/universe Sources                       &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://au.archive.ubuntu.com trusty/multiverse Sources                     &#xA;Hit http://au.archive.ubuntu.com trusty/main amd64 Packages                    &#xA;Hit http://au.archive.ubuntu.com trusty/restricted amd64 Packages              &#xA;Hit http://au.archive.ubuntu.com trusty/universe amd64 Packages                &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://au.archive.ubuntu.com trusty/multiverse amd64 Packages              &#xA;Hit http://au.archive.ubuntu.com trusty/main i386 Packages                     &#xA;Hit http://au.archive.ubuntu.com trusty/restricted i386 Packages               &#xA;Hit http://au.archive.ubuntu.com trusty/universe i386 Packages     &#xA;Hit http://au.archive.ubuntu.com trusty/multiverse i386 Packages   &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en            &#xA;Hit http://au.archive.ubuntu.com trusty/main Translation-en_AU                 &#xA;Hit http://au.archive.ubuntu.com trusty/main Translation-en                    &#xA;Hit http://au.archive.ubuntu.com trusty/multiverse Translation-en_AU           &#xA;Hit http://au.archive.ubuntu.com trusty/multiverse Translation-en              &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages            &#xA;Hit http://au.archive.ubuntu.com trusty/restricted Translation-en_AU&#xA;Hit http://au.archive.ubuntu.com trusty/restricted Translation-en  &#xA;Hit http://au.archive.ubuntu.com trusty/universe Translation-en_AU             &#xA;Hit http://au.archive.ubuntu.com trusty/universe Translation-en                &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Ign http://dl.google.com stable/main Translation-en_AU                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://dl.google.com stable/main Translation-en                            &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Ign http://dl.google.com stable/main Translation-en_AU                         &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Ign http://dl.google.com stable/main Translation-en                            &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en_AU                     &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Fetched 3,805 kB in 25s (147 kB/s)                                             &#xA;Reading package lists... Done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;sudo apt-get upgrade&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  filezilla-common libtinyxml2.6.2&#xA;Use 'apt-get autoremove' to remove them.&#xA;The following packages have been kept back:&#xA;  ffmpeg&#xA;The following packages will be upgraded:&#xA;  firefox firefox-locale-en&#xA;2 to upgrade, 0 to newly install, 0 to remove and 1 not to upgrade.&#xA;Need to get 42.7 MB of archives.&#xA;After this operation, 20.5 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] Y&#xA;Get:1 http://au.archive.ubuntu.com/ubuntu/ trusty-updates/main firefox amd64 44.0.1+build2-0ubuntu0.14.04.1 [42.0 MB]&#xA;Get:2 http://au.archive.ubuntu.com/ubuntu/ trusty-updates/main firefox-locale-en amd64 44.0.1+build2-0ubuntu0.14.04.1 [698 kB]&#xA;Fetched 42.7 MB in 46s (913 kB/s)                                              &#xA;(Reading database ... 847141 files and directories currently installed.)&#xA;Preparing to unpack .../firefox_44.0.1+build2-0ubuntu0.14.04.1_amd64.deb ...&#xA;Unpacking firefox (44.0.1+build2-0ubuntu0.14.04.1) over (44.0+build3-0ubuntu0.14.04.1) ...&#xA;Preparing to unpack .../firefox-locale-en_44.0.1+build2-0ubuntu0.14.04.1_amd64.deb ...&#xA;Unpacking firefox-locale-en (44.0.1+build2-0ubuntu0.14.04.1) over (44.0+build3-0ubuntu0.14.04.1) ...&#xA;Processing triggers for gnome-menus (3.10.1-0ubuntu2) ...&#xA;Processing triggers for desktop-file-utils (0.22-1ubuntu1) ...&#xA;Processing triggers for bamfdaemon (0.5.1+14.04.20140409-0ubuntu1+elementary2~ubuntu14.04.1) ...&#xA;Rebuilding /usr/share/applications/bamf-2.index...&#xA;Processing triggers for mime-support (3.54ubuntu1.1) ...&#xA;Processing triggers for man-db (2.6.7.1-1ubuntu1) ...&#xA;Setting up firefox (44.0.1+build2-0ubuntu0.14.04.1) ...&#xA;Please restart all running instances of firefox, or you will experience problems.&#xA;Setting up firefox-locale-en (44.0.1+build2-0ubuntu0.14.04.1) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;cat /etc/lsb-release&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=&quot;elementary OS&quot;&#xA;DISTRIB_RELEASE=0.3.2&#xA;DISTRIB_CODENAME=freya&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS Freya&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;cat /etc/os-release&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME=&quot;elementary OS&quot;&#xA;VERSION=&quot;0.3.2 Freya&quot;&#xA;ID=&quot;elementary OS&quot;&#xA;ID_LIKE=ubuntu&#xA;PRETTY_NAME=&quot;elementary OS Freya&quot;&#xA;VERSION_ID=&quot;0.3.2&quot;&#xA;HOME_URL=&quot;http://elementary.io/&quot;&#xA;SUPPORT_URL=&quot;http://elementary.io/support/&quot;&#xA;BUG_REPORT_URL=&quot;https://bugs.launchpad.net/elementary/+filebug&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;cat /etc/apt/sources.list&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# deb cdrom:[elementary OS 0.3.1 _Freya_ - Stable amd64 (20150903)]/ trusty main restricted&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty main restricted&#xA;deb-src http://au.archive.ubuntu.com/ubuntu/ trusty main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty-updates universe multiverse main restricted&#xA;deb-src http://au.archive.ubuntu.com/ubuntu/ trusty-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty universe&#xA;deb-src http://au.archive.ubuntu.com/ubuntu/ trusty universe&#xA;# deb http://au.archive.ubuntu.com/ubuntu/ trusty-updates universe&#xA;# deb-src http://au.archive.ubuntu.com/ubuntu/ trusty-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;deb-src http://au.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;# deb http://au.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;# deb-src http://au.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty-backports universe multiverse main restricted&#xA;deb-src http://au.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse&#xA;&#xA;# deb http://security.ubuntu.com/ubuntu trusty-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu trusty-security main restricted&#xA;# deb http://security.ubuntu.com/ubuntu trusty-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu trusty-security universe&#xA;deb http://security.ubuntu.com/ubuntu trusty-security multiverse&#xA;deb-src http://security.ubuntu.com/ubuntu trusty-security multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;deb http://archive.canonical.com/ubuntu trusty partner&#xA;deb-src http://archive.canonical.com/ubuntu trusty partner&#xA;&#xA;## Uncomment the following two lines to add software from Ubuntu's&#xA;## 'extras' repository.&#xA;## This software is not part of Ubuntu, but is offered by third-party&#xA;## developers who want to ship their latest software.&#xA;# deb http://extras.ubuntu.com/ubuntu trusty main&#xA;# deb-src http://extras.ubuntu.com/ubuntu trusty main&#xA;# deb http://security.ubuntu.com/ubuntu/ trusty-security multiverse universe main restricted&#xA;deb http://au.archive.ubuntu.com/ubuntu/ trusty-proposed universe multiverse main restricted&#xA;# deb http://au.archive.ubuntu.com/ubuntu/ jessie-updates main universe restricted multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Reply to @MC Naveen: Error with installing software-center&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;I've run out of space for this post, so I've put the output for this &lt;a href=&quot;http://pastebin.com/18CGmHYh&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2925" LastEditorUserId="3757" LastEditDate="2016-03-12T02:18:32.937" LastActivityDate="2018-02-20T23:53:12.247" Title="The Software Center won't open" Tags="|updates|appcenter|" AnswerCount="7" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="4295" PostTypeId="2" ParentId="2732" CreationDate="2016-02-07T07:56:31.600" Score="11" Body="&lt;p&gt;This is intentional for the reasons you pointed out. At the moment we can't have independent workspace switching. The window manager sees multiple displays as one big workspace in Luna. This can be frustrating because one of the big benefits of having another display is to have a place for things you always want to see like documentation or chat or your email. So in Freya, we made the compromise of making the primary monitor the only one with workspaces. That way you can use the multitasking view to switch between active apps on one display and not have it get rid of an app you wanted to stay put on that second display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eventually, we'd like to be able for each display to have its own set of workspaces. That seems like it would be the most flexible. We've still got a ways to go on making sure the multi-display experience is really great. But this change is one thing that we think makes it a little nicer.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-02-07T07:56:31.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4296" PostTypeId="1" CreationDate="2016-02-07T09:52:01.097" Score="4" ViewCount="845" Body="&lt;p&gt;I have removed Midori Granite with the following command: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge midori-granite&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but now I want to re-install it for Elementary OS Freya. Midori available in Ubuntu Store is different. I want the factory version of Midori which came with Elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$sudo apt-get install midori-granite&#xA;[sudo] password for abhimanyuaryan: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package midori-granite is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;However the following packages replace it:&#xA;  elementary-default-settings&#xA;&#xA;E: Package 'midori-granite' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3983" LastEditorUserId="45" LastEditDate="2016-02-08T06:32:30.327" LastActivityDate="2016-02-08T13:23:11.253" Title="How to install Midori Granite" Tags="|software-installation|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4297" PostTypeId="1" AcceptedAnswerId="4371" CreationDate="2016-02-07T09:57:33.600" Score="2" ViewCount="5982" Body="&lt;p&gt;I don't know I was messing(turning them on and off to see some visual changes) around with some of the extensions in Midori but then I noticed that Javascript got disable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I turned off all the extension in Midori. Restarted Midro but nothing happened. Javascript was still disabled.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$midori -e enable-javascript=true&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(midori:4318): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(midori:4318): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(midori:4318): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(midori:4318): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(midori:4318): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;Vector smash protection is enabled.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3983" LastEditorUserId="3983" LastEditDate="2016-02-07T14:45:14.143" LastActivityDate="2016-02-14T06:28:32.170" Title="How to enable Javascript in Midori" Tags="|midori|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4298" PostTypeId="2" ParentId="4296" CreationDate="2016-02-07T10:49:36.800" Score="1" Body="&lt;p&gt;To find Midori for elementary OS Freya in &lt;code&gt;Software Center&lt;/code&gt; you need to search for &lt;code&gt;midori-granite&lt;/code&gt;, not midori. To install Midori Granite simply run the following command in the terminal and it will install the same Midori that comes with the elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get install midori-granite&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="218" LastEditorUserId="218" LastEditDate="2016-02-07T13:39:58.760" LastActivityDate="2016-02-07T13:39:58.760" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4299" PostTypeId="2" ParentId="4297" CreationDate="2016-02-07T10:51:13.060" Score="0" Body="&lt;p&gt;To enable javascript run the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;midori -e enable-javascript=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For more information check this link: &lt;a href=&quot;http://midori-browser.org/faqs/&quot; rel=&quot;nofollow&quot;&gt;http://midori-browser.org/faqs/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="218" LastActivityDate="2016-02-07T10:51:13.060" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4300" PostTypeId="1" CreationDate="2016-02-07T11:23:15.953" Score="2" ViewCount="434" Body="&lt;p&gt;When my internet connection is cut off by a misconfigured VPN, immediately a window opens that says it cannot connect to the Internet. When I reconnect to the Internet the window loads elementary OS content. It looks like a elementary OS welcome-window or something like that. But it is not loaded in the browser.&#xA;How can I disable this? I do not want any connection besides the programms I use!&#xA;Please advise!&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="4036" LastEditorUserId="3757" LastEditDate="2016-05-06T09:02:30.087" LastActivityDate="2016-05-06T09:02:30.087" Title="Is elementary OS phoning home? Privacy please!" Tags="|applications|elementary-website|internet|privacy|" AnswerCount="1" CommentCount="3" ClosedDate="2016-02-10T15:03:10.247" ContentLicense="CC BY-SA 3.0" />
  <row Id="4301" PostTypeId="1" CreationDate="2016-02-07T11:32:39.100" Score="0" ViewCount="1309" Body="&lt;p&gt;My os had some wifi driver problem so i upgraded to linux kenel 4.2.8 .now my brightness setting is not working.I checked &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/478/how-do-i-change-my-display-brightness&quot;&gt;How do I change my display brightness?&lt;/a&gt; but no luck my icon is missing. &lt;a href=&quot;https://i.stack.imgur.com/v7kLR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v7kLR.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="4035" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-22T11:42:56.160" Title="how do i change my screen brightness?" Tags="|release-freya|settings|display|kernel|brightness|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4302" PostTypeId="1" AcceptedAnswerId="4303" CreationDate="2016-02-07T12:45:19.847" Score="2" ViewCount="711" Body="&lt;p&gt;Inside &lt;code&gt;pantheon-files&lt;/code&gt; folders do not show its size, like files do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/klPYK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/klPYK.png&quot; alt=&quot;No folder size&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However in properties of the folder size is shown:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AanDd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AanDd.png&quot; alt=&quot;Folder properties&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to display folder size directly in file explorer?&lt;/p&gt;&#xA;" OwnerUserId="4037" LastActivityDate="2016-02-07T13:41:58.177" Title="How to display folder size in file explorer?" Tags="|pantheon-files|pantheon|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4303" PostTypeId="2" ParentId="4302" CreationDate="2016-02-07T13:41:58.177" Score="4" Body="&lt;p&gt;The devs should correct me, but I don't think this is possible. I think you will have to file a bug report on launchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason will probably be that it requires a lot of disk reading to find the disk usage of everey directory. For an extreme example opening &lt;code&gt;/&lt;/code&gt;: It will have to recursively read the entire filesystem. &lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-07T13:41:58.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4304" PostTypeId="2" ParentId="4300" CreationDate="2016-02-07T13:56:10.323" Score="5" Body="&lt;p&gt;This sounds like an issue with the Captive Portal Assistant. It's a tool installed by default to assist users in wifi networks with a separate login page (e.g. in a hotel). Most likely it (wrongfully) recognizes your connection as &quot;captive network&quot; and tries to assist you (which doesn't work of course, as there is no login page to show). After successful login, it normally displays &lt;a href=&quot;https://elementary.io&quot;&gt;&lt;code&gt;elementary.io&lt;/code&gt;&lt;/a&gt; to test the connectivity.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want this functionality, you can remove the package &lt;code&gt;capnet-assist&lt;/code&gt;. That being said, elementary OS does not track you in any way. The source code for &lt;code&gt;elementary.io&lt;/code&gt; is even open source, so you could &lt;a href=&quot;https://github.com/elementary/mvp&quot;&gt;check it and make sure it does not track you&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-02-07T13:56:10.323" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4305" PostTypeId="2" ParentId="2732" CreationDate="2016-02-07T13:59:04.360" Score="17" Body="&lt;p&gt;You can change this behaviour either in dconf editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;org -&amp;gt; gnome -&amp;gt; mutter&lt;/code&gt; and uncheck the box &quot; workspaces-only-on-primary&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or if you do not have installed dconf-editor you can use following terminal commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.gnome.mutter workspaces-only-on-primary&lt;/code&gt; to check the current setting. Probably it is &quot;true&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.mutter workspaces-only-on-primary false&lt;/code&gt; to make the settings. Now workspace should contain all monitors.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-07T13:59:04.360" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4307" PostTypeId="2" ParentId="4301" CreationDate="2016-02-07T19:21:21.733" Score="1" Body="&lt;p&gt;There are two solutions that come to my mind:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First one is to use the old kernel. On boot you need to open Grub &gt;&gt; Advanced options. There you can find the older versions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second solution is using &quot;xbacklight&quot;. It's a command line tool to change the display brightness. For installation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;An example to change the brightness to 15 percent:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -set 15&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That are only workarounds and don't solve the the problem completely. &lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-02-07T19:21:21.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4308" PostTypeId="1" AcceptedAnswerId="4309" CreationDate="2016-02-07T21:04:14.347" Score="0" ViewCount="39" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CWkX9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CWkX9.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When clicking the volume tray button a list of media players is displayed.&lt;/p&gt;&#xA;&lt;p&gt;Can some be removed and other added?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-10-06T02:27:20.850" Title="How to edit the list of multimedia players that appear when clicking the volume icon?" Tags="|wingpanel|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4309" PostTypeId="2" ParentId="4308" CreationDate="2016-02-07T21:31:23.373" Score="1" Body="&lt;p&gt;Install &lt;code&gt;dconf-tools&lt;/code&gt; and &lt;code&gt;dconf-editor&lt;/code&gt;, then launch Dconf Editor, go to &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;com &gt; canonical &gt; indicator &gt; sound&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/N2aJe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/N2aJe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More &lt;a href=&quot;https://askubuntu.com/a/288141/47206&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-02-07T21:31:23.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4310" PostTypeId="2" ParentId="81" CreationDate="2016-02-08T01:02:43.130" Score="0" Body="&lt;p&gt;If you use the system settings to change the background, the new background is stored in&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;~/.cache/wallpaper/&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can copy the new background by hand or let do the job by incron.&#xA;Incron is a filebased cron. If you have installed and edit /etc/incron.allow,  you can use incrontab for the copy job.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Call&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;incrontab -e&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and insert&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/USER/.cache/wallpaper/ IN_CLOSE_WRITE cp /home/USER/.cache/wallpaper/$# /usr/share/backgrounds/elementaryos-default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And every time you change the background of your desktop, the logon background will also changed.&lt;/p&gt;&#xA;" OwnerUserId="4043" LastActivityDate="2016-02-08T01:02:43.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4311" PostTypeId="1" CreationDate="2016-02-08T10:11:14.267" Score="2" ViewCount="1381" Body="&lt;p&gt;I want to hide team viewer icon from the top status bar. But, I still want teamviewer to keep running in background. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already checked &lt;code&gt;Automatically minimize local team panel&lt;/code&gt; in advanced settings &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZM93H.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZM93H.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3983" LastActivityDate="2016-09-11T00:24:25.177" Title="Hide teamviewer icon from top bar" Tags="|settings|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4313" PostTypeId="1" CreationDate="2016-02-08T10:31:57.830" Score="0" ViewCount="57" Body="&lt;p&gt;When I want to move windows to the side of the active desktop (for putting two of them on the same screen) some programs are able to fit to the side (i.e. they resize accordingly), some only do that for specific configurations (f.ex. texmaker does that only if the internal pdf viewer is closed) and some (f.ex. the document viewer) simply does not change size when trying to &quot;glue&quot; it to the sides. Why? And how can I change that behaviour if I want to have it for all programs?&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2016-02-08T14:14:41.767" Title="Window moving to sides does not work" Tags="|window-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4315" PostTypeId="2" ParentId="4313" CreationDate="2016-02-08T14:14:41.767" Score="1" Body="&lt;p&gt;the program may be setting a minimum width above the width of your screen / 2. Gala will refuse to tile or fullscreen apps that won't fit. can you manually scale the window so it would fit there? if you can scale it file a bug against &lt;a href=&quot;https://launchpad.net/gala/+bugs&quot; rel=&quot;nofollow&quot;&gt;gala&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastActivityDate="2016-02-08T14:14:41.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4316" PostTypeId="1" AcceptedAnswerId="4332" CreationDate="2016-02-08T15:40:11.493" Score="0" ViewCount="1533" Body="&lt;p&gt;Big linux noob ahead, so please be kind if I don't exactly understand everything I'm talking about here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Ubuntu on my father's old macbook 4.1 a few days ago, and it worked just fine. Today we tried to install Elementary OS (multiple times) but it always got stuck on a black screen with a blinking white line - holding shift during boot did nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After searching around a bit, I decided to try and reinstall grub2 with the tool &quot;&lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;boot-repair&lt;/a&gt;&quot;. Didn't fix the issue, so I tried to reboot to reinstall Elementary without installing updates. I noticed that there now was a third option in the apple boot-menu: &quot;EFI boot&quot; (aside from &quot;Windows&quot;, the one that would normally start ubuntu, and then my usb installation media). I thought &quot;what the hell&quot; and tried the option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here I am greeted by a quick screen that says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to open \EFI\BOOT\grubx64.efi - Not Found&#xA;Failed to load image \EFI\BOOT\grubx64.efi: Not Found&#xA;Failed to open \EFI\BOOT\MokManager.efi - Not Found&#xA;Failed to load image \EFI\BOOT\MokManager.efi: Not Found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From here I can simply choose &quot;elementary os&quot; and the computer boots as it is supposed to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried some other things in the midst of things, including following &lt;a href=&quot;https://wiki.debian.org/GrubEFIReinstall&quot; rel=&quot;nofollow&quot;&gt;this guide for Debian&lt;/a&gt;, and applying it to ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry if this has already been answered&lt;/p&gt;&#xA;" OwnerUserId="4049" LastActivityDate="2016-02-09T16:51:16.060" Title="Can't boot into Elementary OS on Macbook without efi boot" Tags="|boot|uefi|macbook|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4317" PostTypeId="1" CreationDate="2016-02-08T16:01:49.017" Score="1" ViewCount="116" Body="&lt;p&gt;So after clean install of elementary OS freya and install some packages i got an issue with my WiFi connection.&#xA;it says disconnected and nothing shows up but i have many available WiFi in my place. And when i check my phone it was detecting all available WiFi connection but my notebook with freya in it just don't detect at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searching and googling any available solution but none of them are fixing my issue. I'm a noob at linux and i don't know what todo anymore :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me&lt;/p&gt;&#xA;" OwnerUserId="4044" LastEditorUserId="3757" LastEditDate="2016-05-06T14:15:08.543" LastActivityDate="2016-09-03T17:10:22.720" Title="My WiFi won't list any available SSID" Tags="|release-freya|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4318" PostTypeId="1" AcceptedAnswerId="8374" CreationDate="2016-02-08T22:44:42.760" Score="8" ViewCount="4146" Body="&lt;p&gt;When a terminal is running and I launch another, is there any way to open a new tab in the same window instead of open a new window?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-11-22T12:49:09.367" Title="Open a new tab in terminal instead of a new window?" Tags="|pantheon-terminal|" AnswerCount="5" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4320" PostTypeId="2" ParentId="81" CreationDate="2016-02-09T02:22:19.767" Score="0" Body="&lt;p&gt;Yes you can change it !! Instructions in the following link: &lt;a href=&quot;http://webcheerz.com/2016/01/23/how-to-set-lockscreen-wallpaper-in-elementary-os/&quot; rel=&quot;nofollow&quot;&gt;Change Lock Screen wallpaper in elementary OS&lt;/a&gt;. It's basically copy your wallpaper into &lt;code&gt;/usr/share/backgrounds/&lt;/code&gt; , rename it to &lt;code&gt;elementaryos-default&lt;/code&gt; and change properties to &lt;code&gt;read&lt;/code&gt; (644). &lt;/p&gt;&#xA;" OwnerUserId="3433" LastEditorUserId="34" LastEditDate="2016-02-29T17:48:32.603" LastActivityDate="2016-02-29T17:48:32.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4321" PostTypeId="2" ParentId="4294" CreationDate="2016-02-09T02:26:02.320" Score="2" Body="&lt;p&gt;Simply reinstall your software center :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To uninstall Software Center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove software-center&#xA;&#xA;sudo apt-get autoremove software-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To re-install Software Center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get install software-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3433" LastActivityDate="2016-02-09T02:26:02.320" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4322" PostTypeId="2" ParentId="4249" CreationDate="2016-02-09T02:33:15.383" Score="1" Body="&lt;p&gt;This is due to the process(wingpanel) stop. Even sometime application drawer won't work. I run this command. It will kill the current process and make it restart. Run this command line in your terminal.WinKey+T to open terminal. Paste this command and press enter. I hope this will solve your problem.   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3433" LastEditorUserId="3433" LastEditDate="2016-02-11T08:34:41.137" LastActivityDate="2016-02-11T08:34:41.137" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4323" PostTypeId="2" ParentId="4311" CreationDate="2016-02-09T07:01:01.437" Score="1" Body="&lt;p&gt;I think, that's an application specific choice not to hide on panel. Personally I prefer a non-hiding icon for such a potentially suspicious application.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-02-09T07:01:01.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4324" PostTypeId="2" ParentId="4318" CreationDate="2016-02-09T08:14:36.563" Score="0" Body="&lt;p&gt;The default terminal in Elementary OS offers the possibility to open a new tab. On the left side of the terminal you'll find a plus which opens a new tab in the same window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YzJDD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YzJDD.png&quot; alt=&quot;Open new tab&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-02-09T08:14:36.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4325" PostTypeId="2" ParentId="4318" CreationDate="2016-02-09T09:22:59.273" Score="1" Body="&lt;p&gt;Keyboard Shortcut is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ctrl+Shift+T&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More elementary tutorials found at &lt;a href=&quot;http://www.webcheerz.com&quot; rel=&quot;nofollow&quot;&gt;WebCheerz&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3433" LastEditorUserId="3433" LastEditDate="2016-03-02T03:11:40.347" LastActivityDate="2016-03-02T03:11:40.347" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4327" PostTypeId="1" AcceptedAnswerId="4428" CreationDate="2016-02-09T12:28:38.473" Score="3" ViewCount="2680" Body="&lt;p&gt;I recently bought an Asus X554LA laptop, on which Freya works flawlessly.&lt;br&gt;&#xA;Unfortunately the internal wifi board (Mediatek MT7630E) is not supported on Linux, there are some unofficial drivers but I failed to install them.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run &quot;sudo lshw -C network&quot; the output I get is:&lt;br&gt;&#xA;&lt;code&gt;*-network&lt;br&gt;&#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: eth0&#xA;       version: 10&#xA;       serial: 1c:b7:2c:96:2f:65&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-3_0.0.1 04/23/13 ip=192.168.1.93 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s&#xA;       resources: irq:47 ioport:e000(size=256) memory:f7104000-f7104fff memory:f7100000-f7103fff&#xA;  *-network UNCLAIMED&#xA;       description: Network controller&#xA;       product: MT7630e 802.11bgn Wireless Network Adapter&#xA;       vendor: MEDIATEK Corp.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       version: 00&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:f7000000-f70fffff&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to make the chipset work I tried to update the kernel (I am currently running 4.4.1-040401-generic). I also tried to install this unofficial driver &lt;a href=&quot;https://github.com/neurobin/MT7630E&quot; rel=&quot;nofollow&quot;&gt;link&lt;/a&gt; (and other versions of it as well) but when I launch &quot;./install&quot; I get an error mentioning &lt;code&gt;-fstack-protector-strong not supported by compiler&lt;/code&gt; (I won't post the whole output because it cointains a lot of backticks and mess up the markdown layout).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a workaround I tried to use a wifi dongle (Edimax EW-7811Un) which worked fine once I installed the drivers, but its antenna has a very short range, so overall it's not a viable solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do anybody know a solution to install the driver?&lt;/p&gt;&#xA;" OwnerUserId="4055" LastEditorUserId="4055" LastEditDate="2016-02-21T10:08:09.817" LastActivityDate="2016-02-21T10:08:09.817" Title="Problem with Mediatek MT7630E and kernel 4.4" Tags="|wifi|drivers|internet|hardware|" AnswerCount="1" CommentCount="16" ContentLicense="CC BY-SA 3.0" />
  <row Id="4328" PostTypeId="1" AcceptedAnswerId="4345" CreationDate="2016-02-09T13:37:38.487" Score="4" ViewCount="609" Body="&lt;p&gt;On my computer keyboard input has a 1&gt; second delay compared to Windows 10 which has 0 delay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The computer is a Sony Vaio VGN-NR120E and it has always been like this&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-02-13T04:13:09.313" LastActivityDate="2018-07-26T17:21:30.970" Title="Laggy keyboard input on elementary OS compared to Windows 10" Tags="|keyboard|laptop|input|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4329" PostTypeId="1" CreationDate="2016-02-09T14:27:04.760" Score="0" ViewCount="258" Body="&lt;p&gt;I'm using the 64 bit ver. of Freya and I have an AMD HD5770. I installed the latest driver provided at AMD website. Now this driver is 64 bit only and 32 bit games don't run. &#xA;I need to know if I can install the 32 bit driver similarly and not break anything. &#xA;I know the repository's proprietary fglrx contains both libraries but I just wanted to use the latest drivers. &lt;/p&gt;&#xA;" OwnerUserId="4056" LastActivityDate="2016-07-04T17:01:25.383" Title="32 bit AMD driver on 64 bit Freya" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4330" PostTypeId="2" ParentId="4329" CreationDate="2016-02-09T14:45:42.500" Score="2" Body="&lt;p&gt;This is a bit technical, so let me know with a comment on anything you get stuck with but here goes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your 32 bit games might not be failing because of your driver but because 64 bit Ubuntu doesn't ship 32 bit libraries. there used to be an easy metapackage for 32 bit support called ia32-libs but for whatever reason it was removed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To work around this go to your game's folder in terminal eg &lt;code&gt;~/games/foobar&lt;/code&gt; and in it type &lt;code&gt;ldd foobar&lt;/code&gt; using the output to find the missing libraries. You can then install the 32 bit versions of them. As an example for sdl2 you'd type &lt;code&gt;libsdl2.0:i386&lt;/code&gt; the &lt;code&gt;:i386&lt;/code&gt; denoting the architecture. You could theoretically install arm libs this way but they won't run on your processor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt-cache search foo&lt;/code&gt; will probably help you alot here.&lt;/p&gt;&#xA;" OwnerUserId="2578" LastEditorUserId="3757" LastEditDate="2016-05-05T14:39:40.063" LastActivityDate="2016-05-05T14:39:40.063" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4331" PostTypeId="2" ParentId="4317" CreationDate="2016-02-09T15:25:39.943" Score="1" Body="&lt;p&gt;A few things you could try:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Try booting into an older version of the Linux kernel. This option will be available if you've installed updates to Freya. When you first boot your computer, the menu that appears should give you the option to boot into an older version.&lt;/li&gt;&#xA;&lt;li&gt;Try uninstalling the packages that you installed and then reboot.&lt;/li&gt;&#xA;&lt;li&gt;Open the terminal and run &lt;code&gt;ifconfig&lt;/code&gt;. This command will list the network interfaces that are set up on your computer. If you paste the output of the command into your post, that might help with troubleshooting.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Just out of curiosity, what packages did you install?&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-02-09T15:25:39.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4332" PostTypeId="2" ParentId="4316" CreationDate="2016-02-09T16:51:16.060" Score="1" Body="&lt;p&gt;I managed to fix the issue by reinstalling (though I don't think it was necessary) following &lt;a href=&quot;http://heeris.id.au/2014/ubuntu-plus-mac-pure-efi-boot/&quot; rel=&quot;nofollow&quot;&gt;these&lt;/a&gt; instructions, though I think it was mainly the last part that helped.&lt;/p&gt;&#xA;" OwnerUserId="4049" LastActivityDate="2016-02-09T16:51:16.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4333" PostTypeId="1" CreationDate="2016-02-09T16:54:01.053" Score="2" ViewCount="430" Body="&lt;p&gt;I'm using Arc darker theme on Elementary OS Freya and that made eclipse look horrible:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/63xkz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/63xkz.png&quot; alt=&quot;eclipse looking horrible&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I tried to run eclipse with Arc dark theme so it look good like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SWT_GTK3=1 GTK_THEME=Arc-Dark eclipse44&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;by doing that eclipse started and did looked good but caused the system to get super slow that I almost could move the courser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BUkQ2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BUkQ2.png&quot; alt=&quot;eclipse looking good&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried it many times with different themes and the problem kept happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So why is this problem happening and how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="3646" LastEditorUserId="3646" LastEditDate="2016-02-09T17:12:03.930" LastActivityDate="2016-02-09T17:12:03.930" Title="Eclipse set theme system slow down" Tags="|gtk|eclipse|" AnswerCount="0" CommentCount="0" ClosedDate="2017-10-08T17:22:08.343" ContentLicense="CC BY-SA 3.0" />
  <row Id="4335" PostTypeId="2" ParentId="4248" CreationDate="2016-02-09T21:12:05.247" Score="0" Body="&lt;p&gt;I don't know, but it sounds like it might be an error on the installation disk? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, you actually can install freya 0.3.2 on your MacBooks using a bootable USB stick. I did this on a MacBook 4.1 (13-inch early 2008 Intel Core 2 Duo), and it worked perfectly well. There shouldn't be any reason why this wouldn't work on your computer. That way you can also try a new download of the disk image, maybe yours got corrupted causing the error message.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-02-09T21:12:05.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4336" PostTypeId="1" CreationDate="2016-02-10T07:49:01.453" Score="3" ViewCount="985" Body="&lt;p&gt;is it possible to connect Maya Calendar to Microsoft Exchange ? I couldn't have the information if Exchange is supporting Caldav, or maybe there are workarounds ?&lt;/p&gt;&#xA;" OwnerUserId="3761" LastActivityDate="2016-11-29T15:50:09.813" Title="is it possible to connect Maya Calendar to Microsoft Exchange?" Tags="|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4337" PostTypeId="2" ParentId="2071" CreationDate="2016-02-10T10:25:08.027" Score="1" Body="&lt;p&gt;You need to add this to the end of that existing fix code in the gtk.css file...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;EMsgComposer GtkHTML {&#xA;    color: #000000;&#xA;    background-color: #ffffff;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4062" LastActivityDate="2016-02-10T10:25:08.027" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4340" PostTypeId="2" ParentId="4336" CreationDate="2016-02-10T15:02:09.007" Score="3" Body="&lt;p&gt;Exchange generally allows you to publish a calendar feed in .ics format. This will give Maya read-only access to your calendar. Here are instructions on &lt;a href=&quot;https://it.uoregon.edu/Exchange-Google-Sync&quot; rel=&quot;nofollow&quot;&gt;publishing the feed in Outlook 2007&lt;/a&gt;. You can also publish the feed &lt;a href=&quot;https://support.office.com/en-us/article/Sharing-your-calendar-in-Outlook-Web-App-7ecef8ae-139c-40d9-bae2-a23977ee58d5?CorrelationId=3f167aea-2090-4ff7-a90e-cb7eaadf8a0b&amp;amp;ui=en-US&amp;amp;rs=en-US&amp;amp;ad=US#__toc375064921&quot; rel=&quot;nofollow&quot;&gt;from the Outlook web app&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, read/write Exchange support on Linux is limited. You might have better luck using the Outlook Web app. In the Midori web browser, if you open the Outlook web app and click Menu --&gt; Create Launcher, you'll get a standalone wrapper for the web app that you can run from the Elementary launcher.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-02-10T15:02:09.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4341" PostTypeId="1" CreationDate="2016-02-10T15:03:14.617" Score="3" ViewCount="288" Body="&lt;p&gt;I have recently switched from Windows 8.1 to Elementary OS on my Samsung Chronos NP700Z5A. I have followed all the instructions that I found and the OS works quite well. I have installed the Samsung tools, which enables the function keys. IT allows changing the fan's working modes on 3 levels. The only problem that is that the fan does work most of the time even in the silent mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I encountered this problem when I switched from Windows 7 to Windows 8.1 until I could find the matched version of Samsung tools. It looks that the Ubuntu software has not been set properly. It considerably reduces the battery life.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone suggest me any solution? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best Mehran&lt;/p&gt;&#xA;" OwnerUserId="4070" LastEditorUserId="3757" LastEditDate="2016-04-25T12:04:34.057" LastActivityDate="2016-08-23T13:56:28.317" Title="Fan control of my Samsung Chronos 7" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4342" PostTypeId="1" CreationDate="2016-02-10T17:25:22.337" Score="1" ViewCount="234" Body="&lt;p&gt;Every time I start Maya it instantly closes again. Is there anything I can do about that?&#xA;I installed all automatically received updates.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[_LOG_LEVEL_INFO 15:44:16.552528] Application.vala:155: Kalender version: 0.3.1.1&#xA;[_LOG_LEVEL_INFO 15:44:16.552581] Application.vala:157: Kernel version: 3.19.0-39-generic&#xA;[_LOG_LEVEL_FATAL 15:44:16.789360] maya_util_is_the_all_day: assertion 'dtend != NULL' failed&#xA;[_LOG_LEVEL_FATAL 15:44:16.789426] Kalender will not function properly.&#xA;[_LOG_LEVEL_FATAL 15:44:16.789471] [GLib] g_date_time_format: assertion 'datetime != NULL' failed&#xA;[_LOG_LEVEL_FATAL 15:44:16.789494] Kalender will not function properly. Segmentation fault (Speicherabzug geschrieben)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4071" LastEditorUserId="26" LastEditDate="2016-02-16T21:00:40.817" LastActivityDate="2016-02-16T21:00:40.817" Title="Maya calendar closes after start" Tags="|calendar|" AnswerCount="1" CommentCount="2" ClosedDate="2016-02-16T21:01:03.043" ContentLicense="CC BY-SA 3.0" />
  <row Id="4343" PostTypeId="1" CreationDate="2016-02-10T17:29:30.677" Score="4" ViewCount="192" Body="&lt;p&gt;One thing I really like about Hangouts is that every time you get a message, that chat window's header turn green in the dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similarly, the chat windows can be &quot;minimized&quot; to the lower part of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However this features doesn't seem to work this way in elementary OS (I've used OS X and Windows and it works that way). The windows just float around and there's no way to dock each chat window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's there a workaround for this?&lt;/p&gt;&#xA;" OwnerUserId="3958" LastEditorUserId="3757" LastEditDate="2016-05-06T05:23:23.027" LastActivityDate="2016-09-03T12:00:11.037" Title="Google Hangouts docked windows" Tags="|google-chrome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4344" PostTypeId="1" CreationDate="2016-02-10T18:51:23.897" Score="2" ViewCount="236" Body="&lt;p&gt;Recently I dual booted my laptop HP Pavilion Notebook ab219tx with Windows 10 and elementary OS 0.3.2. At first it connected to my WiFi but poor signal and internet speed is also very slow even through I am near to the router and after some time it just continuously connecting and disconnecting but when I tried with my mobile hotspot it just worked fine.So &lt;/p&gt;&#xA;" OwnerUserId="4072" LastEditorUserId="3757" LastEditDate="2016-05-06T14:14:28.107" LastActivityDate="2016-05-06T14:14:28.107" Title="WiFi dropouts with router but not with mobile WiFi hotspot in elementary OS" Tags="|dual-boot|wifi|microsoft-windows|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4345" PostTypeId="2" ParentId="4328" CreationDate="2016-02-11T01:53:17.907" Score="2" Body="&lt;p&gt;Is it possible that the Slow Keys option has somehow gotten turned on? You can find this option in the &quot;Universal Access&quot; section of settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l7lOk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l7lOk.png&quot; alt=&quot;Slow Keys in settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-02-11T01:53:17.907" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4347" PostTypeId="1" AcceptedAnswerId="4366" CreationDate="2016-02-11T05:40:39.217" Score="1" ViewCount="156" Body="&lt;p&gt;I am migrating from OS X and have some Truecrypt containers that I want to access and eventually convert to Linux friendly containers. What solutions exists for elementary OS and is there one over the others?&lt;/p&gt;&#xA;" OwnerUserId="3107" LastActivityDate="2016-02-13T18:20:37.750" Title="How do I access my Truecrypt container?" Tags="|release-freya|applications|mount|security|software-recommendation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4348" PostTypeId="1" CreationDate="2016-02-11T07:53:01.083" Score="2" ViewCount="75" Body="&lt;p&gt;My laptop's AMD GPU is broken, so I've been using the basic display driver to run things in windows until now. I booted into elementary OS on the machine, but it automatically re-renabled the GPU and used the broken GPU as the display. How do I make elementary not use the GPU, and use the basic display driver instead?&#xA;Fwiw, running the GPU causes artifacts and screen freezes constantly.&lt;/p&gt;&#xA;" OwnerUserId="4076" LastEditorUserId="3757" LastEditDate="2016-04-18T03:16:55.840" LastActivityDate="2016-04-18T03:16:55.840" Title="Switching video drivers before boot" Tags="|boot|graphics|amd|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4351" PostTypeId="2" ParentId="1464" CreationDate="2016-02-11T19:36:29.280" Score="1" Body="&lt;p&gt;You can create UEFI bootable USB drive (I'm use rufus) with elementary OS and boot from it. When you boot from USB with elementary you can install OS as usual and after it you will have two boot options in UEFI (also you can see LAN boot options if you enable it in BIOS):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Windows Boot manager&lt;/li&gt;&#xA;&lt;li&gt;ubuntu&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And you can choose main boot option and boot from it. If windows boot loader will be disabled or not present at list you can repair it with bootable Windows USB drive.&lt;/p&gt;&#xA;" OwnerUserId="4082" LastActivityDate="2016-02-11T19:36:29.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4352" PostTypeId="1" AcceptedAnswerId="12623" CreationDate="2016-02-11T19:43:13.207" Score="1" ViewCount="39" Body="&lt;p&gt;So, I install elementary OS Freya and see that wireless switcher hotkey is not working (Fn + F2) and ambient light sensor switcher (Fn + A). Are any ways to enable it?&lt;/p&gt;&#xA;" OwnerUserId="4082" LastEditorUserId="4082" LastEditDate="2016-02-12T05:42:00.950" LastActivityDate="2017-07-06T10:49:43.503" Title="Asus bu400a some hotkyes not working" Tags="|release-freya|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4353" PostTypeId="2" ParentId="4342" CreationDate="2016-02-11T20:03:29.510" Score="1" Body="&lt;p&gt;It looks like a known bug, reported 2015-02-10,  but in undecided state. You can follow it at&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1420431&quot; rel=&quot;nofollow&quot;&gt;Maya at Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some workaround solutions that you can try at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1388515&quot; rel=&quot;nofollow&quot;&gt;Maya bug no. 1388515&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See comments #11 and #13.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can mark it as affect to you, in order to find a solution by Maya dev team.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-11T20:03:29.510" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4354" PostTypeId="2" ParentId="4281" CreationDate="2016-02-11T21:33:51.050" Score="2" Body="&lt;p&gt;I found the solution. The problem is a driver issue with the Intel Skylake graphics chipset. You can solve it by upgrading to kernel 4.3 and upwards. For instructions to update to kernel 4.4 see here: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only problem is that now there are some random graphical glitches appearing from time to time. It is kind of annoying, but doesn't affect functionality in any way. I guess the drivers for Skylake graphics aren't fully developed yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like updating the kernel as described in the abovementioned article bears some risk: &lt;a href=&quot;http://shnatsel.blogspot.de/2013/12/why-you-should-not-upgrade-kernel-on.html&quot; rel=&quot;nofollow&quot;&gt;http://shnatsel.blogspot.de/2013/12/why-you-should-not-upgrade-kernel-on.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't tell because I don't know enough about Linux. See for yourself :)&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-03-17T22:46:52.697" LastActivityDate="2016-03-17T22:46:52.697" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4355" PostTypeId="1" AcceptedAnswerId="4356" CreationDate="2016-02-12T00:07:11.030" Score="2" ViewCount="602" Body="&lt;p&gt;I want to install wine on my elementaryOS Freya system.  It marks two packages for removal - &lt;code&gt;xdg-user-dirs&lt;/code&gt; and &lt;code&gt;xdg-user-dirs-gtk&lt;/code&gt;, which I'm hesitant to approve.  Are these packages essential/will I break my system by going ahead with the installation?  If so, is there a work-around?&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2016-02-16T01:22:13.513" Title="Am I safe to install Wine?" Tags="|release-freya|wine|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4356" PostTypeId="2" ParentId="4355" CreationDate="2016-02-12T02:39:19.280" Score="0" Body="&lt;p&gt;I installed WINE on my system using the &lt;code&gt;ubuntu-wine&lt;/code&gt; PPA (personal package archive) because the software center WINE would not install and had no problems with it on my system which is freya 0.3.2 64-bit.&lt;/p&gt;&#xA;&lt;h3&gt;To add the PPA and install WINE run the following&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa &#xA;sudo apt-get update&#xA;sudo apt-get install wine1.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should now have a perfectly working WINE installation. If you have any problems add a comment to this answer&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-02-13T08:11:25.120" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4357" PostTypeId="2" ParentId="4341" CreationDate="2016-02-12T05:39:44.713" Score="1" Body="&lt;p&gt;A lot of laptop tools which exist on Windows doesn't exist on Linux systems. You can try something universal like &lt;a href=&quot;https://askubuntu.com/a/46135/142249&quot;&gt;in this answer&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="4082" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-02-12T05:39:44.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4358" PostTypeId="1" CreationDate="2016-02-12T08:16:32.833" Score="2" ViewCount="75" Body="&lt;p&gt;I installed a OS alongside OS X on my old Macbook with rEFIt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I boot into Elementary it fails to load the Desktop environment and shows me the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you guys have any ideas to how I can fix this?&lt;/p&gt;&#xA;" OwnerUserId="4086" LastEditorUserId="3757" LastEditDate="2016-05-06T08:51:15.550" LastActivityDate="2016-09-03T15:04:22.963" Title="Fresh Dual Boot install fails to load desktop" Tags="|boot|luna|show-desktop|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4359" PostTypeId="2" ParentId="2443" CreationDate="2016-02-12T11:13:30.583" Score="0" Body="&lt;p&gt;First Ctrl + Alt + F4 ( In black screen )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Later will ask login and password , do the normal login and then the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt- get update &amp;amp;&amp;amp; sudo apt- get upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt- get install xserver- xorg&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.vivaolinux.com.br/topico/Novo-no-Linux/Tela-preta-ao-iniciar-ubuntu-14?pagina=02&quot; rel=&quot;nofollow&quot;&gt;https://www.vivaolinux.com.br/topico/Novo-no-Linux/Tela-preta-ao-iniciar-ubuntu-14?pagina=02&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3977" LastActivityDate="2016-02-12T11:13:30.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4360" PostTypeId="1" CreationDate="2016-02-12T17:09:43.290" Score="2" ViewCount="169" Body="&lt;p&gt;My Lenovo G40 has a BR layout keyboard that works fine until I bough a US layout mechanical keyboard, after that I cannot set the us layout as default in any way. It aways change to BR, after and after. A simple alt+tab is enough to reconfigure my keyboard settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried to run:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;setxkbmap -rules evdev -model evdev -layout us -variant intl -option caps:ctrl_modifier&lt;/li&gt;&#xA;&lt;li&gt;gsettings set org.gnome.desktop.input-sources current 0&lt;/li&gt;&#xA;&lt;li&gt;sudo dpkg-reconfigure keyboard-configuration&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Every command works fine until I change the current windows, that imediatly changes to br layout again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want my configurations in that way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;squiter@stark:~$ setxkbmap -print -verbose 10&#xA;Setting verbose level to 10&#xA;locale is C&#xA;Trying to load rules file ./rules/evdev...&#xA;Trying to load rules file /usr/share/X11/xkb/rules/evdev...&#xA;Success.&#xA;Applied rules from evdev:&#xA;rules:      evdev&#xA;model:      evdev&#xA;layout:     us&#xA;variant:    intl&#xA;options:    caps:ctrl_modifier&#xA;Trying to build keymap using the following components:&#xA;keycodes:   evdev+aliases(qwerty)&#xA;types:      complete&#xA;compat:     complete&#xA;symbols:    pc+us(intl)+inet(evdev)+capslock(ctrl_modifier)&#xA;geometry:   pc(pc104)&#xA;xkb_keymap {&#xA;    xkb_keycodes  { include &quot;evdev+aliases(qwerty)&quot; };&#xA;    xkb_types     { include &quot;complete&quot;  };&#xA;    xkb_compat    { include &quot;complete&quot;  };&#xA;    xkb_symbols   { include &quot;pc+us(intl)+inet(evdev)+capslock(ctrl_modifier)&quot;   };&#xA;    xkb_geometry  { include &quot;pc(pc104)&quot; };&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But every time I change current app window it transform in that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;squiter@stark:~$ setxkbmap -print -verbose 10&#xA;Setting verbose level to 10&#xA;locale is C&#xA;Trying to load rules file ./rules/evdev...&#xA;Trying to load rules file /usr/share/X11/xkb/rules/evdev...&#xA;Success.&#xA;Applied rules from evdev:&#xA;rules:      evdev&#xA;model:      evdev&#xA;layout:     br,us&#xA;variant:    ,intl&#xA;options:    caps:ctrl_modifier&#xA;Trying to build keymap using the following components:&#xA;keycodes:   evdev+aliases(qwerty)&#xA;types:      complete&#xA;compat:     complete&#xA;symbols:    pc+br+us(intl):2+inet(evdev)+capslock(ctrl_modifier)&#xA;geometry:   pc(pc104)&#xA;xkb_keymap {&#xA;    xkb_keycodes  { include &quot;evdev+aliases(qwerty)&quot; };&#xA;    xkb_types     { include &quot;complete&quot;  };&#xA;    xkb_compat    { include &quot;complete&quot;  };&#xA;    xkb_symbols   { include &quot;pc+br+us(intl):2+inet(evdev)+capslock(ctrl_modifier)&quot;  };&#xA;    xkb_geometry  { include &quot;pc(pc104)&quot; };&#xA;};&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I took some scrrenshots of my configurations: &lt;a href=&quot;https://www.dropbox.com/sh/14df99r65213vot/AAB5IhOqxOY7d8_RPoTQo8fga?dl=0&quot; rel=&quot;nofollow&quot;&gt;https://www.dropbox.com/sh/14df99r65213vot/AAB5IhOqxOY7d8_RPoTQo8fga?dl=0&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4092" LastActivityDate="2016-11-18T23:24:53.460" Title="Keyboard layout changes on alt tab" Tags="|keyboard|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4361" PostTypeId="1" CreationDate="2016-02-12T21:06:40.543" Score="1" ViewCount="83" Body="&lt;p&gt;after booting stops elementry on the desktop.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only the desktop wallpaper and the Mouse cursor can be seen.&lt;br&gt;&#xA;The computer responds to nothing.&lt;br&gt;&#xA;I tried Freya 32Bit and 64Bit.&lt;br&gt;&#xA;Why is that?&lt;br&gt;&#xA;On another PC running without any problems?&lt;br&gt;&#xA;The PC is a / CPU 4000+ / 3Gb DDR2 / FX5200.&lt;br&gt;&#xA;Please help me because I find Elementry simply brilliant.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad English.&lt;/p&gt;&#xA;" OwnerUserId="4094" LastActivityDate="2016-10-12T13:12:02.633" Title="After booting elementry from USB Stick it crashes" Tags="|release-freya|boot|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4362" PostTypeId="1" CreationDate="2016-02-12T22:43:08.933" Score="1" ViewCount="486" Body="&lt;p&gt;Like I said, I don't know how to get the stock network manager to connect to a network. I am on a late 2010 MacBook Air, so I don't have an ethernet port. I need wifi to connect to the internet. Everything else is running fine and dandy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd usually assign this to some problems with the drivers or the firmware. This being a MacBook makes it even more likely. However, the weird part is that I CAN connect to wifi with no problems at all if I use the terminal. Here are the commands I use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    sudo service network-manager stop&#xA;    sudo iwconfig wlan0 essid &amp;lt;Enter SSID here&amp;gt;&#xA;    sudo dhclient -v wlan0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This makes it all work perfectly. But the thing is, it's a pain in the ass to connect to any network with a password, and it also doesn't support automatic reconnecting or anything like that. I don't want to have to do this every time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some other things I've tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    sudo apt-get remove --purge network-manager&#xA;    sudo apt-get autoremove&#xA;    sudo apt-get install network-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This didn't help. It wasn't just a bad install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried instaling WICD instead and seeing if that would work, but there were some things wrong with it. First, I couldn't get it into wingpanel. Second, it's as ugly as all hell. Third, it still wouldn't connect to a network. Seriously, it did the same thing the stock network manager did. Got stuck on &quot;Obtaining IP Address&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do, guys. Can anyone help? Much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="4095" LastActivityDate="2016-02-12T22:43:08.933" Title="I can't get network-manager to connect to a network" Tags="|wifi|drivers|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4364" PostTypeId="2" ParentId="4344" CreationDate="2016-02-13T16:00:03.657" Score="0" Body="&lt;p&gt;This wifi network card has some issues with kernels in Trusty Ubuntu and derivates. You can try from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be fwlps=N ips=N&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This trick makes possible a new management of the card and its prevent the card to go to suspend mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must restart your computer after use this command,  or reload the driver with these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info about this known bug for Ubuntu 14.04 and derivates at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1240940&quot; rel=&quot;nofollow&quot;&gt;Ubuntu bugs at Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this option doesn't work, you can install a new Realtek driver from the rtwifi_new repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-generic build-essential git&#xA;git clone http://github.com/lwfinger/rtlwifi_new&#xA;cd rtlwifi_new&#xA;make&#xA;sudo make install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then reboot or reload the driver how it explain before.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-02-13T17:58:27.390" LastActivityDate="2016-02-13T17:58:27.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4365" PostTypeId="2" ParentId="4358" CreationDate="2016-02-13T17:56:19.203" Score="1" Body="&lt;p&gt;Updating to Freya did solve the problem. I ran &lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt; and everything worked perfectly. &lt;/p&gt;&#xA;" OwnerUserId="4086" LastEditorUserId="3757" LastEditDate="2016-02-15T10:27:19.363" LastActivityDate="2016-02-15T10:27:19.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4366" PostTypeId="2" ParentId="4347" CreationDate="2016-02-13T18:20:37.750" Score="-1" Body="&lt;p&gt;You can just use TrueCrypt for Linux! Your containers will work!&lt;/p&gt;&#xA;" OwnerUserId="4097" LastActivityDate="2016-02-13T18:20:37.750" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4367" PostTypeId="1" AcceptedAnswerId="4429" CreationDate="2016-02-13T18:43:45.417" Score="1" ViewCount="122" Body="&lt;p&gt;I'm not a single click fan, so double click being broke is really killing me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the latest update of pantheon-files Double Click seems to be completely broke.  If I go back to Single Click everything works fine.  I've also noticed a broken screen icon in my dash now, probably related to something else that got installed with the latest updates, but maybe its related?&lt;/p&gt;&#xA;" OwnerUserId="1242" LastEditorUserId="45" LastEditDate="2016-02-14T03:59:34.300" LastActivityDate="2016-02-18T20:32:04.477" Title="Double click broke in latest pantheon-files" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4368" PostTypeId="1" CreationDate="2016-02-13T19:20:30.960" Score="3" ViewCount="205" Body="&lt;p&gt;I have an HP Chromebook 14. I erased ChromeOS and replaced it with Elementary OS. It has all the proper drivers for the touchpad and such.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Touchégg and ran it in a terminal. It said any gestures recognised would in the terminal. The problem is, nothing showed up. I just want some three finger guestures of opening the workspace switcher and moving between workspaces. Any help?&lt;/p&gt;&#xA;" OwnerUserId="4098" LastActivityDate="2016-12-03T22:21:52.417" Title="Touchégg doesn't work on my Chromebook" Tags="|touchpad|chromebook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4369" PostTypeId="1" CreationDate="2016-02-13T21:25:22.110" Score="0" ViewCount="165" Body="&lt;p&gt;I installed Freya (64bit) on a PC I got for free, it's a Dell Optiplex 980 with an i7 @ 2.9Ghz, 4Gb RAM and 320Gb hdd and &quot;sadly&quot; a PCIe Matrox m91xx graphic card (specifically m9120 LP Plus). For a &quot;free&quot; PC not too bad, but its not a fast thing. I bought a 24&quot; Samsung display and want to use it primarly for internet, and couple of excels / words etc (usual home office stuff).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The card works great on Windows with 1920x1080 resolution, but somehow Matrox is not interested into revising their drivers for Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I have Freya running with a xorg.conf using VESA and 1280x1024, but I  don't think its using any acceleration. Also, I put modelines for 1920x1080 but I assume VESA cannot handle this resolution (can someone confirm this ? )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to get more out of the card w/o the propietary drivers ? Any of you having experience with the provided m91xx Linux drivers and maybe how to install them on Freya ? (I tried and it never worked).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best,&#xA;Andres.&lt;/p&gt;&#xA;" OwnerUserId="4099" LastEditorUserId="4099" LastEditDate="2016-02-13T21:33:36.817" LastActivityDate="2016-02-14T09:56:03.557" Title="Graphic card driver not available / supported (matrox)" Tags="|graphic-drivers|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4370" PostTypeId="2" ParentId="4361" CreationDate="2016-02-13T21:30:44.663" Score="1" Body="&lt;p&gt;I'm not exactly sure what could be the issue, but try the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The crash doesn't allow you to do anything ? Can you access the terminal by clicking Ctrl+Alt+F1 ?&lt;/li&gt;&#xA;&lt;li&gt;I think it might be related to your Graphic Card, but it's too early to say. Trying 1) will give a hint, and you might try to see if your WiFi or LAN is connected. If so, you might be able to troubleshoot better downloading Graphic Card drivers, eg. latest Nvidia ones.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4099" LastEditorDisplayName="user212" LastEditDate="2016-10-12T13:12:02.633" LastActivityDate="2016-10-12T13:12:02.633" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4371" PostTypeId="2" ParentId="4297" CreationDate="2016-02-14T06:28:32.170" Score="1" Body="&lt;p&gt;Go to terminal and paste the below command, worked for me&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;enable-scripts=true&quot; &amp;gt;&amp;gt; ~/.config/midori/config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3983" LastActivityDate="2016-02-14T06:28:32.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4372" PostTypeId="2" ParentId="4369" CreationDate="2016-02-14T09:56:03.557" Score="1" Body="&lt;p&gt;M-Series cards have support for Linux, as the vendor specified on the Matrox webpage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can download the driver for your card from:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.matrox.com/graphics/en/support/drivers/download/http://www.matrox.com/graphics/en/support/drivers/download/?id=639&quot; rel=&quot;nofollow&quot;&gt;M-Series driver for Linux 64bits&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install just follow the instructions in NOTES section in that page.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-14T09:56:03.557" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4376" PostTypeId="1" CreationDate="2016-02-14T13:14:34.313" Score="1" ViewCount="79" Body="&lt;p&gt;I have an icon in wingpanel which I cannot assign to any app. Probably I uninstalled an app - but I do not know wich one it was.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vPcCa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vPcCa.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to find out which indicator is not loading here? When there is a wingpanel config file, I think I would be able to find out which app is affected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-14T13:14:34.313" Title="Unknown icon in wingpanel" Tags="|wingpanel|" AnswerCount="0" CommentCount="2" ClosedDate="2016-02-23T20:20:15.617" ContentLicense="CC BY-SA 3.0" />
  <row Id="4378" PostTypeId="1" CreationDate="2016-02-14T17:50:00.967" Score="4" ViewCount="1820" Body="&lt;p&gt;I recently tried to dual boot Elementary OS with Windows 7. I can see WiFi networks but when I try and connect to them, it asks for the password then tries to connect. After a while it stops and asks me the password again. I'm using a TP-LINK TL-WN881ND Wireless Adapter. Thanks for all your help in advance. Tell me if you need any other information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: What terminal says after &lt;code&gt;sudo lshw -C network&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; elementary@elementary:~$ sudo lshw -C network&#xA;  *-network               &#xA;   description: Wireless interface&#xA;   product: AR9287 Wireless Network Adapter (PCI-Express)&#xA;   vendor: Qualcomm Atheros&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   logical name: wlan0&#xA;   version: 01&#xA;   serial: e8:94:f6:fb:2b:ff&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=ath9k driverversion=3.19.0-39-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:32 memory:fe800000-fe80ffff&#xA;  *-network&#xA;   description: Ethernet interface&#xA;   product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;   vendor: Realtek Semiconductor Co., Ltd.&#xA;   physical id: 0&#xA;   bus info: pci@0000:04:00.0&#xA;   logical name: eth0&#xA;   version: 06&#xA;   serial: 74:d4:35:99:77:fd&#xA;   size: 10Mbit/s&#xA;   capacity: 1Gbit/s&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;   resources: irq:29 ioport:d000(size=256) memory:fe700000-fe700fff memory:d0000000-d0003fff&#xA; elementary@elementary:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4107" LastEditorUserId="16827" LastEditDate="2019-01-09T10:58:28.273" LastActivityDate="2019-06-08T12:03:20.390" Title="Cannot connect to network - Keeps asking for Password" Tags="|wifi|networking|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="4381" PostTypeId="1" CreationDate="2016-02-14T18:53:40.797" Score="1" ViewCount="169" Body="&lt;p&gt;I haven't changed anything audio management related since installing elementary OS 0.3.2, but I have to refresh Youtube videos (or pages they are embedded in) in Firefox to get them to play.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This isn't a Flash-only thing because other programs do it too. if I use Clementine and open a game or similar sound producing application, Clementine moves to the next song and throws the following error: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;pa_stream_writeable_size() failed: Connection Terminated&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the time this error shows up, apport reports that Pulseaudio Sound system KDE Routing Policy has closed unexpectedly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else have this issue? Would reinstalling elementary OS fix it?&lt;/p&gt;&#xA;" OwnerUserId="4103" LastActivityDate="2016-09-13T05:24:18.197" Title="Pulseaudio won't allow more than one application to play sound" Tags="|release-freya|sound|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4382" PostTypeId="1" CreationDate="2016-02-14T19:30:38.053" Score="4" ViewCount="68" Body="&lt;p&gt;Does the Pantheon desktop support:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;'windowshading' of open windows?&lt;/li&gt;&#xA;&lt;li&gt;Popup menus?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I haven't been able to determine this from anything online, and would like to find out without doing a full installation of Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="4111" LastActivityDate="2016-02-16T13:53:40.100" Title="Does Pantheon support windowshades, popup menus?" Tags="|pantheon|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4383" PostTypeId="1" CreationDate="2016-02-14T21:48:05.080" Score="0" ViewCount="876" Body="&lt;p&gt;I am using Elementary OS Freya and since I installed a program not using the included software manager, I get an icon in the menu bar like this: &lt;a href=&quot;https://i.stack.imgur.com/6VykZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6VykZ.png&quot; alt=&quot;icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update -&amp;gt; Sudo apt-get upgrade &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I installed the packages that were held back and did&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sudo autoremove &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am a noob at this sorry..I noticed that Unity was installed too..&lt;/p&gt;&#xA;" OwnerUserId="4112" LastActivityDate="2016-09-14T21:06:34.600" Title="icon not displaying in menu bar" Tags="|icons|menu|" AnswerCount="2" CommentCount="4" ClosedDate="2016-09-15T16:01:12.113" ContentLicense="CC BY-SA 3.0" />
  <row Id="4386" PostTypeId="1" CreationDate="2016-02-15T09:17:57.117" Score="3" ViewCount="23331" Body="&lt;p&gt;I'm asked for the root password and it doesn't match my user password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me the root password?&lt;/p&gt;&#xA;" OwnerUserId="4116" LastEditorUserId="68" LastEditDate="2016-07-15T00:06:32.367" LastActivityDate="2017-01-17T20:34:02.243" Title="Superuser/root password does not match user password" Tags="|root|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4389" PostTypeId="2" ParentId="4086" CreationDate="2016-02-15T15:57:29.630" Score="1" Body="&lt;p&gt;You have to create a small Shell Script. Create an empty file and then open it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Paste:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#!/bin/bash &#xA;xset s off &#xA;xset -dpms&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save file.&#xA;Open terminal and prompt:&#xA;&lt;code&gt;chmod +x filename&lt;/code&gt; (where &quot;filename&quot; is the name of that file)&#xA;then prompt:&#xA;&lt;code&gt;gnome-session-properties&lt;/code&gt;&#xA;click add and browse your new file.That's it. After restart you can type in terminal &lt;code&gt;xset q&lt;/code&gt; to make sure that &lt;code&gt;DMPS is Disabled&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="643" LastEditDate="2016-02-15T16:13:02.127" LastActivityDate="2016-02-15T16:13:02.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4391" PostTypeId="1" CreationDate="2016-02-15T17:57:34.643" Score="1" ViewCount="81" Body="&lt;p&gt;Here lies the issue : when I try to change the hour displayed by the wingpanel via the parameters, it does not take into account.&lt;/p&gt;&#xA;" OwnerUserId="4121" LastEditorUserId="4121" LastEditDate="2016-02-16T15:08:15.017" LastActivityDate="2016-02-16T15:08:15.017" Title="Impossible to change time" Tags="|wingpanel|time|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4392" PostTypeId="1" AcceptedAnswerId="4394" CreationDate="2016-02-15T17:57:48.117" Score="9" ViewCount="13448" Body="&lt;p&gt;The &quot;Software &amp;amp; Updates&quot; app is missing from elementary OS 0.3.2, how can I re-install it?&lt;/p&gt;&#xA;" OwnerUserId="4120" LastEditorUserId="26" LastEditDate="2016-02-16T20:57:41.347" LastActivityDate="2016-02-16T20:57:41.347" Title="How can I re-install the Software &amp; Updates app?" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4393" PostTypeId="1" CreationDate="2016-02-15T19:34:33.637" Score="1" ViewCount="50" Body="&lt;p&gt;I've been playing around with dconf tools. I'm not sure what I've done but now when I try to click on Applications, a terminal opens. So far, clicking everywhere else works fine. Any ideas? Thanks! &lt;/p&gt;&#xA;" OwnerUserId="4123" LastActivityDate="2016-02-15T19:34:33.637" Title="Clicking on &quot;Applications&quot; in the top-left corner opens a terminal" Tags="|applications|pantheon-terminal|dconf|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4394" PostTypeId="2" ParentId="4392" CreationDate="2016-02-15T19:42:09.653" Score="10" Body="&lt;p&gt;You must open a terminal and write:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install software-properties-gtk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-15T19:42:09.653" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4395" PostTypeId="2" ParentId="4386" CreationDate="2016-02-15T20:22:01.653" Score="1" Body="&lt;p&gt;According the Ubuntu documentation, you can reset your root password following these steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot your system and hold shift key pressed until you can see the GRUB screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use your arrow keys to go to an option marked as &quot;elementary OS, linux...  Recovery mode&quot;. Hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must see a new screen with some options.  Select the option marked as &quot;root&quot;. You will be prompted to  a bash screen where you can see something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@freya:-$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You must make your filesystem writable with the next command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -rw -o remount /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can change your password with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;passwd username &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where &lt;em&gt;username&lt;/em&gt; is your current user. You must enter the new password twice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, you can continue with normal boot with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;init 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More information at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/LostPassword&quot; rel=&quot;nofollow&quot;&gt;Ubuntu documentation &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-15T20:22:01.653" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4396" PostTypeId="2" ParentId="3603" CreationDate="2016-02-15T22:10:14.540" Score="-1" Body="&lt;p&gt;Press and hold &lt;kbd&gt;FN&lt;/kbd&gt;, press &lt;kbd&gt;F9&lt;/kbd&gt;. Release &lt;kbd&gt;FN&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4124" LastEditorUserId="26" LastEditDate="2016-02-16T20:44:20.617" LastActivityDate="2016-02-16T20:44:20.617" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4397" PostTypeId="1" AcceptedAnswerId="4400" CreationDate="2016-02-15T23:58:16.660" Score="1" ViewCount="147" Body="&lt;p&gt;A fake bank page appeared as i was trying to acess my bank account. The support attendant from the bank told me that i might have a trojan on my notebook and net. &lt;/p&gt;&#xA;" OwnerUserId="4125" LastActivityDate="2016-02-21T07:55:11.593" Title="How can i remove and prevent a trojan on freya?" Tags="|release-freya|security|internet|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4398" PostTypeId="1" CreationDate="2016-02-16T01:10:49.917" Score="2" ViewCount="3784" Body="&lt;p&gt;I tried to install the proprietary fglrx AMD graphics driver on my computer which is running Freya, however it didn't work. Seems my graphics card is just too old and is no longer supported. (That's the last AMD card i'm going to be buying.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short I purged the installation of fglrx* but now it just boots to a blanks screen. I can still access the command line and strangely enough within command line it does seem to be using the correct driver (or at least recognizing my monitor's native resolution)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing I've done so far seems to be working, and following any of the guides I've found online have been fruitless. (They're all written for Ubuntu which doesn't error out when trying to reinstall xserver-xorg with an error about gnome-control-center)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated. At this point I'm just trying to revert to the graphics drivers it was using after installing from the CD-ROM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And before anyone says it, no reinstalling is not an option.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2020-12-08T23:03:06.743" Title="How to reinstall the default graphics driver after failed fglrx install?" Tags="|graphic-drivers|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4399" PostTypeId="2" ParentId="4381" CreationDate="2016-02-16T01:13:12.257" Score="1" Body="&lt;p&gt;Try using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pulseaudio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will reinstall pulseaudio.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2016-02-16T01:13:12.257" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4400" PostTypeId="2" ParentId="4397" CreationDate="2016-02-16T01:18:33.613" Score="4" Body="&lt;p&gt;Are you running wine? If so, try clearing out your virtual C drive. If you have one, it's incredibly unlikely it's anything but a Windows virus hijacking a wine installation. Linux viruses are exceptionally rare and those that do exist typically target the larger server based distributions rather than smaller desktop distributions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would say more than likely, you were the victim of a phishing scam. Ensure you only ever enter your bank log on information into the site if you've typed the site's URL directly into your browser and never when linked to it from another page or email. For more information, research the topic &quot;online phishing&quot;.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2016-02-16T01:18:33.613" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4401" PostTypeId="2" ParentId="4355" CreationDate="2016-02-16T01:22:13.513" Score="-1" Body="&lt;p&gt;I've been using it on and off without installing any additional ppa's for awhile and I haven't noticed any issues.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2016-02-16T01:22:13.513" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4402" PostTypeId="1" AcceptedAnswerId="4403" CreationDate="2016-02-16T08:05:37.767" Score="2" ViewCount="364" Body="&lt;p&gt;I used to be able to open up the Files program and read/write/delete/update any file on my Windows disks/partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, the drives/partitions appear in Files, but nothing happens when I click on them. I think this might have started happening after I went to Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any fix?&lt;/p&gt;&#xA;" OwnerUserId="2872" LastActivityDate="2016-02-16T10:12:04.950" Title="How to access Windows 10 NTFS contents?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4403" PostTypeId="2" ParentId="4402" CreationDate="2016-02-16T10:12:04.950" Score="2" Body="&lt;p&gt;This issue isn't about elementary OS.  It's about Windows 10 and it fast boot mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find a solution here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/145904/408622&quot;&gt;how mount Windows Ntfs partition &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-02-16T10:12:04.950" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4404" PostTypeId="1" CreationDate="2016-02-16T11:32:53.490" Score="2" ViewCount="814" Body="&lt;p&gt;Yesterday, I decide to change my icon set to Numix. I didn't like the look with numix inherit icons, so I change to elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I notice that the WingPanel was always black. When there is not a fullscreen it is has is semi transparent and when there is a fullscreen it is black. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do my research on the net and i found a way to fix it with dconf and autoadjust-alpha. It works, but when i restart it is the same: The panel is semi transparent (instead of completely transparent) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry about my english, and thanks for the support! &lt;/p&gt;&#xA;" OwnerUserId="4132" LastEditorUserId="3757" LastEditDate="2016-04-06T12:08:17.593" LastActivityDate="2017-04-09T23:18:24.560" Title="My Wingpanel bar is suddenly black with and without fullscreen app" Tags="|wingpanel|desktop|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4405" PostTypeId="2" ParentId="4383" CreationDate="2016-02-16T13:14:02.500" Score="0" Body="&lt;p&gt;Your icon-theme have'nt the application icon, look in internet the icon that's you like an put it in the folder of your icon-theme as root. Logout. Excuse my english.&lt;/p&gt;&#xA;" OwnerUserId="3805" LastActivityDate="2016-02-16T13:14:02.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4406" PostTypeId="2" ParentId="4091" CreationDate="2016-02-16T13:31:42.000" Score="3" Body="&lt;p&gt;Thanks, finally I managed to solve the issue. I killed the second desktop running in a separate window and purged all the Nautilus packages. Now it works as it should be.&lt;/p&gt;&#xA;" OwnerUserId="3850" LastActivityDate="2016-02-16T13:31:42.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4407" PostTypeId="2" ParentId="4382" CreationDate="2016-02-16T13:53:40.100" Score="2" Body="&lt;p&gt;Pantheon supports Window Shading (to my memory), but not Desktop Menus (what you are calling popup menus).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Slingshot provides that purpose. You however mimic this functionality (almost) by using keyboard shortcut to open Slingshot (&lt;code&gt;slingshot-launcher&lt;/code&gt;) at any location on the desktop.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-02-16T13:53:40.100" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4408" PostTypeId="1" CreationDate="2016-02-16T18:00:46.153" Score="2" ViewCount="118" Body="&lt;p&gt;I opened Geary for the first time today.  Added 4 separate accounts.  Sometimes when I click on an email to read in full page, Geary closes/quits without notice.  I can't see a pattern to when it closes.  Is there a solution? I'm happy to provide more information if you let me know what will be helpful.&lt;/p&gt;&#xA;" OwnerUserId="4134" LastEditorUserId="26" LastEditDate="2016-02-16T20:57:05.450" LastActivityDate="2016-02-19T01:51:41.253" Title="Why does Geary close randomly when trying to read full-page?" Tags="|release-freya|pantheon-mail|" AnswerCount="0" CommentCount="2" ClosedDate="2016-03-03T18:45:31.917" ContentLicense="CC BY-SA 3.0" />
  <row Id="4409" PostTypeId="1" CreationDate="2016-02-16T20:30:31.997" Score="3" ViewCount="3577" Body="&lt;p&gt;My system, which runs oneElementary OS, was acting up (package manager wouldn't open, system wouldn't restart, etc.) so I did a hard reset on it. Now when I boot it up and try to log in I get the error &lt;code&gt;unable to launch &quot;gnome-session --session=pantheon&quot; X session --- &quot;gnome-session --session=pantheon&quot; not found; falling pack to default session.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It then brings me back to the log in screen. I can still boot into terminal, but I can't get X to open at all.. Any ideas? I really need back in&lt;/p&gt;&#xA;" OwnerUserId="4135" LastEditorUserId="3757" LastEditDate="2016-04-04T14:22:16.753" LastActivityDate="2017-12-03T20:14:45.013" Title="Unable to start Pantheon" Tags="|pantheon|gnome|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4411" PostTypeId="1" CreationDate="2016-02-16T22:42:56.080" Score="3" ViewCount="2858" Body="&lt;p&gt;My notebook is an ASUS X550DP that came with Windows 8. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I`m trying to make a dual-boot with Freya 0.3.2 64bits, but every time I try to install I get this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;'grub-install /dev/sda' failed. This is a fatal error&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I`m booting from a flash-drive in UEFI mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I left 60Gb for Freya, of which 20Gb is ext4 &lt;code&gt;/&lt;/code&gt;, 36Gb is ext4 &lt;code&gt;/home&lt;/code&gt; and 4Gb is a swap space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do? &lt;/p&gt;&#xA;" OwnerUserId="4138" LastEditorUserId="3757" LastEditDate="2016-04-23T11:45:19.253" LastActivityDate="2016-09-21T21:46:19.090" Title="Can`t install Freya: &quot;'grub-install /dev/sda' failed. This is a fatal error&quot;" Tags="|system-installation|grub|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4413" PostTypeId="1" CreationDate="2016-02-17T13:15:03.127" Score="2" ViewCount="455" Body="&lt;p&gt;The elementary OS file browser (Pantheon Files) allows us to tag the folders name with colors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to change those colors and/or rearrange them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any idea how? Which file to edit?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to any kind human that may be of any help. :)&lt;/p&gt;&#xA;" OwnerUserId="2402" LastEditorUserId="3757" LastEditDate="2016-05-06T14:26:24.687" LastActivityDate="2016-05-06T14:26:24.687" Title="Color tags of Files" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4414" PostTypeId="2" ParentId="333" CreationDate="2016-02-17T14:16:03.513" Score="0" Body="&lt;p&gt;You have two options:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.&quot;You will always see this message with non-gtk3 apps. It's harmless and you can ignore it.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.&lt;code&gt;sudo rm /etc/profile.d/pantheon-filechooser-module.sh&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2016-02-17T14:16:03.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4415" PostTypeId="2" ParentId="2894" CreationDate="2016-02-17T15:43:45.357" Score="1" Body="&lt;p&gt;Finally, I made it using rEFInd. I guess it could be done as well with GRUB, but it was only while reading the rEFInd documentation when I understood what was happening. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that, depending on the hardware vendor (mine is Dell/Alienware), some machines will search for microsoft's bootmgfw.efi exclusively instead of the general bootx64.efi. So it does not matter if Grub is installed correctly, it will not boot. The steps to solve this are described &lt;a href=&quot;http://www.rodsbooks.com/refind/installing.html#manual_renaming&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, and basically they consist in renaming elementary's bootx64.efi and replacing Microsoft's bootmgfw.efi with it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also deactivated secure boot, fast boot and automatic boot repair. This last one is done by typing in a windows admin shell:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {current} recoveryenabled No&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I guess this makes me to give a kudo to the blueprint to &lt;a href=&quot;https://blueprints.launchpad.net/elementaryos/+spec/efi-first&quot; rel=&quot;nofollow&quot;&gt;ditch grub for rEFInd&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2016-02-17T15:43:45.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4416" PostTypeId="2" ParentId="4383" CreationDate="2016-02-17T15:51:30.063" Score="1" Body="&lt;p&gt;Open task manger immediately after you login to your computer and check which application is running and does not show its icon.  For instance, Dropbox does that.  To make sure which application missing just try to treminate that application this will remove the icon from the topbar. &lt;/p&gt;&#xA;" OwnerUserId="4118" LastActivityDate="2016-02-17T15:51:30.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4417" PostTypeId="2" ParentId="2396" CreationDate="2016-02-17T21:58:05.083" Score="0" Body="&lt;p&gt;You have to go to the executable file, right click on it and open properties.&#xA;Then choose the second tab and check if you have execute permissions. Also make sure that you are the owner of the file (and not the root user).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now try to open it. Does it work? If not, right click again and then press run.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-02-17T21:58:05.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4418" PostTypeId="1" CreationDate="2016-02-17T23:07:04.863" Score="1" ViewCount="526" Body="&lt;p&gt;I have a Medion Akoya E6241 Notebook.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have done a fresh installation of Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since installation the touchpad has not worked, and I have to use a usb mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Terminal input list is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&#xA;Virtual core pointer                        id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ Dell Dell USB Mouse                       id=10   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ USB2.0 HD UVC WebCam                      id=9    [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=11   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have ensured that touchpad is turned on in mouse and touch pad settings. I have also played around with all options there in to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My BIOS does not give any options for the touch pad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have attempted to enable the touchpad using &lt;code&gt;xinput set-prop 4 &quot;Device Enabled&quot; 1&lt;/code&gt;, unfortunately this has no effect. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to disable the touchpad also, and i get this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&#xA;X Error of failed request:  BadAccess (attempt to access private resource denied)&#xA;  Major opcode of failed request:  131 (XInputExtension)&#xA;  Minor opcode of failed request:  57 ()&#xA;  Serial number of failed request:  20&#xA;  Current serial number in output stream:  21&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can anyone please suggest what may be the issue and how to go about fixing it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for taking time to read this.&lt;/p&gt;&#xA;" OwnerUserId="4146" LastEditorUserId="75" LastEditDate="2016-02-18T11:30:43.253" LastActivityDate="2016-02-22T10:46:21.633" Title="Touchpad issues" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ClosedDate="2016-03-11T02:24:27.980" ContentLicense="CC BY-SA 3.0" />
  <row Id="4419" PostTypeId="1" CreationDate="2016-02-18T11:53:25.520" Score="1" ViewCount="327" Body="&lt;p&gt;I recently installed Freya on my computer and removed Windows so the only OS I have is Elementary... I've been getting a problem where the laptop refuses to connect to BTWifi (large Isp in the uk) I can connect to any network with a password but I can't connect to networks without passwords. BTWifi requires you to log in through a web portal once you connect, however it's not connecting for me to do that. Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="4150" LastActivityDate="2016-02-18T11:53:25.520" Title="Public Hotspot not connecting" Tags="|wifi|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T16:32:58.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="4420" PostTypeId="1" CreationDate="2016-02-18T12:17:40.913" Score="1" ViewCount="560" Body="&lt;p&gt;Is there a way to see a name of the current application on wingpanel? I know that is possible to launch applications on Freya and see &quot;global menu&quot; on wingpanel, but I didn't found any wingpanel's fork that shows name of the application.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2016-02-23T14:18:35.460" Title="Show a name of the current application on wingpanel like in OS X" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4422" PostTypeId="1" AcceptedAnswerId="7114" CreationDate="2016-02-18T14:27:02.087" Score="3" ViewCount="2598" Body="&lt;p&gt;By default, Alt+Space brings up the window menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot find it in System Settings -&gt; Keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot reassign it from there because I want to use it in a text editor in the terminal (nano) to switch between words.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried gsettings after seeing &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/184/how-can-i-reset-keyboard-shortcuts&quot;&gt;this question&lt;/a&gt;, but I cannot find it there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to disable it, for the terminal at least?&lt;/p&gt;&#xA;" OwnerUserId="4152" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-31T04:48:25.430" Title="Disable Alt + Space shortcut for window menu" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4423" PostTypeId="1" CreationDate="2016-02-18T15:08:05.520" Score="2" ViewCount="458" Body="&lt;p&gt;Whenever i try to add &lt;strong&gt;any&lt;/strong&gt; PPA it shows me the following error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/add-apt-repository&quot;, line 91, in &#xA;    sp = SoftwareProperties(options=options)&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 109, in __init__&#xA;    self.reload_sourceslist()&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 599, in reload_sourceslist&#xA;    self.distro.get_sources(self.sourceslist)    &#xA;  File &quot;/usr/lib/python3/dist-packages/aptsources/distro.py&quot;, line 89, in get_sources&#xA;    (self.id, self.codename))&#xA;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for Ubuntu/n/a`` &lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;cat /etc/lsb-release&lt;/code&gt; (editing it to &lt;code&gt;elementary-os&lt;/code&gt; did not solve the problem)&#xA;&lt;code&gt;&lt;pre&gt;$ cat /etc/lsb-release &#xA;DISTRIB_ID=Ubuntu&#xA;DISTRIB_RELEASE=14.04&#xA;DISTRIB_CODENAME=trusty&#xA;DISTRIB_DESCRIPTION=&quot;Ubuntu 14.04.4 LTS&quot;&#xA;&lt;/pre&gt;&lt;/code&gt;&#xA;Output of &lt;code&gt;cat /etc/os-release&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/os-release&#xA;NAME=&quot;Ubuntu&quot;&#xA;VERSION=&quot;14.04.4 LTS, Trusty Tahr&quot;&#xA;ID=ubuntu&#xA;ID_LIKE=debian&#xA;PRETTY_NAME=&quot;Ubuntu 14.04.4 LTS&quot;&#xA;VERSION_ID=&quot;14.04&quot;&#xA;HOME_URL=&quot;http://www.ubuntu.com/&quot;&#xA;SUPPORT_URL=&quot;http://help.ubuntu.com/&quot;&#xA;BUG_REPORT_URL=&quot;http://bugs.launchpad.net/ubuntu/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Solution at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2914/could-not-find-a-distribution-template-for-ubuntu-n-a-error-in-elementary-os&quot;&gt;&amp;quot;could not find a distribution template for Ubuntu/n/a&amp;quot; error in elementary OS&lt;/a&gt; does not solve my problem.&lt;/p&gt;&#xA;" OwnerUserId="4153" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-02T03:42:25.907" Title="Error while adding PPA on elementary OS freya" Tags="|apt|ppa|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4424" PostTypeId="2" ParentId="4397" CreationDate="2016-02-18T15:50:56.660" Score="0" Body="&lt;p&gt;If you are using Firefox , go into the preferences tab , then go safely tab and disable the last two boxes. This should solve your problem.&lt;/p&gt;&#xA;" OwnerUserId="3977" LastActivityDate="2016-02-18T15:50:56.660" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4425" PostTypeId="1" CreationDate="2016-02-18T16:48:43.537" Score="3" ViewCount="4132" Body="&lt;p&gt;On my Elementary OS Freya dconf Editor have less height than others applications (for example atom or chromium) and I prefer this smaller appearance. I wonder what css or xml file I have to edit in order to achieve it, is it possible? &lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-05-08T14:23:01.620" Title="How to reduce title bar height?" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4427" PostTypeId="1" CreationDate="2016-02-18T18:01:08.797" Score="2" ViewCount="609" Body="&lt;p&gt;Anyone tell if there's driver for Intel GMA X3100?&#xA;I installed Elementary OS on an old Mac but it uses an alternative driver and works badly.&lt;/p&gt;&#xA;" OwnerUserId="4155" LastActivityDate="2016-03-10T23:54:54.343" Title="Intel GMA X3100 Driver" Tags="|graphic-drivers|macbook|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4428" PostTypeId="2" ParentId="4327" CreationDate="2016-02-18T20:13:49.710" Score="0" Body="&lt;p&gt;&lt;strong&gt;Mediatek MT7630E driver with kernel 4.4 support&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to compile a new driver, you must open a terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall git linux-headers-$(uname -r) build-essential dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In elementary OS Freya you must install too the new gcc compiler. Open a terminal and write:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-toolchain-r/test&#xA;sudo apt-get update &#xA;sudo apt-get install g++-5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can try to download the driver from the zip source at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/neurobin/MT7630E&quot; rel=&quot;nofollow&quot;&gt;neurobin github.com &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and unzipped it, or you just clone it with git in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/neurobin/MT7630E.git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After download, you must enter in the new created folder. Open the file README.md and follow instructions to install the new driver.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-02-18T20:34:05.933" LastActivityDate="2016-02-18T20:34:05.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4429" PostTypeId="2" ParentId="4367" CreationDate="2016-02-18T20:32:04.477" Score="2" Body="&lt;p&gt;I am told a fix was committed yesterday to trunk, or the daily PPA, updating should fix this issue as far as anyone knows. Seems like this was the related bug &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1546330&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1546330&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-02-18T20:32:04.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4431" PostTypeId="1" CreationDate="2016-02-19T04:14:30.983" Score="0" ViewCount="3261" Body="&lt;p&gt;I cannot use ibus-unikey for typing Vietnamese.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &quot;keyboard layout&quot; I can't found Vietnamese-Unikey (just &quot;Vietnamese&quot; only -&gt; this is VNI keyboard)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With ibus-setup, I added English and VN-Unikey but I can't switch between those options. I checked keyboard shortcut and changed but it doesn't work at all.&lt;/p&gt;&#xA;" OwnerUserId="4160" LastActivityDate="2017-07-23T16:57:48.103" Title="I can't use ibus-unikey" Tags="|ibus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4433" PostTypeId="2" ParentId="4427" CreationDate="2016-02-19T07:38:19.297" Score="1" Body="&lt;p&gt;There is no &quot;alternative driver&quot; for Intel GPUs. Intel releases their Linux GPU drivers as &lt;a href=&quot;https://en.wikipedia.org/wiki/Free_and_open-source_graphics_device_driver#Intel&quot; rel=&quot;nofollow&quot;&gt;Free Software&lt;/a&gt; and those are installed by default on your system. Your hardware might be simply too outdated to run properly with elementary OS, but &quot;works badly&quot; is unfortunately not really informative concerning the problems you experience.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-02-19T07:38:19.297" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4434" PostTypeId="2" ParentId="4418" CreationDate="2016-02-19T11:22:13.850" Score="1" Body="&lt;p&gt;Try this &lt;a href=&quot;https://askubuntu.com/a/528429/138887&quot;&gt;https://askubuntu.com/a/528429/138887&lt;/a&gt; Mine is not detected by any Linux distro either that's how I make it work.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You have to add &quot;i8042.reset i8042.nomux i8042.nopnp i8042.noloop&quot; to the kernel boot options. You can do this permanently by adding these arguments to the &quot;GRUB_CMDLINE_LINUX_DEFAULT&quot; attribute in the file /etc/default/grub. Then it looks like this.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash i8042.reset i8042.nomux i8042.nopnp i8042.noloop&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that you just need to enter this command and reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4166" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-02-22T10:46:21.633" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4435" PostTypeId="1" AcceptedAnswerId="4486" CreationDate="2016-02-19T15:45:11.143" Score="0" ViewCount="260" Body="&lt;p&gt;I just dual-installed Elementary alongside Windows 7. I adjusted the GRUB settings in /etc/default/grub to show the GRUB menu when I boot, but unfortunately, Windows is not an option. I am a &quot;noobie&quot; clearly. Does anyone have any recommendations for me? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://paste2.org/5ynI000y&quot; rel=&quot;nofollow&quot;&gt;http://paste2.org/5ynI000y&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4169" LastActivityDate="2016-02-24T15:23:31.840" Title="Cannot boot to Windows 7 after dual installing Elementary" Tags="|dual-boot|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4436" PostTypeId="1" AcceptedAnswerId="4437" CreationDate="2016-02-19T19:25:23.827" Score="0" ViewCount="1162" Body="&lt;p&gt;I wanted to extract from .zip file, some files, and I pressed right click on file, as per usual, &quot;Extract Here&quot; and it doesn't do anything, I've tried again and again.. nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;file-roller: error while loading shared libraries: libmagic.so.1:&#xA; cannot open shared object file: No such file or directory.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I remember that I removed that file &quot;libmagic.so.1&quot; by mistake, and I didn't knew what will happen, now I know. The problem is how I recover that file?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.: Sorry for my bad english.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I found the answer,&#xA;I've tried to run this code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libmagic1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And it works!&#xA;Thanks!&#xA;You can close this topic.&lt;/p&gt;&#xA;" OwnerUserId="2640" LastEditorUserId="2640" LastEditDate="2016-02-20T11:13:32.893" LastActivityDate="2016-02-20T11:13:32.893" Title="Archive manager not opening" Tags="|release-freya|pantheon-files|files|user-interface|file-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4437" PostTypeId="2" ParentId="4436" CreationDate="2016-02-19T21:44:32.323" Score="0" Body="&lt;p&gt;Try from terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libmagic-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-19T21:44:32.323" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4438" PostTypeId="1" CreationDate="2016-02-19T22:24:52.463" Score="1" ViewCount="77" Body="&lt;p&gt;first post ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few days ago, a Question Mark icon appeared in my Wingpanel..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8SBgr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8SBgr.png&quot; alt=&quot;a Question Mark icon appeared in my Wingpanel.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is it there, and how can I make it go away?! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I click it, I get a tiny dialogue box with no dialogue in it..&lt;/p&gt;&#xA;" OwnerUserId="4174" LastActivityDate="2016-02-19T22:24:52.463" Title="Persistent question mark icon in Wingpanel" Tags="|wingpanel|icons|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4441" PostTypeId="2" ParentId="4435" CreationDate="2016-02-20T07:22:25.773" Score="0" Body="&lt;p&gt;Why did you edit the settings, exactly? I believe that GRUB automatically shows up when booting  (it did for me, at least). Maybe you messed something up when you edited the grub config... try reverting your changes, and see what the system does when you try to boot with default settings... &lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-02-20T07:22:25.773" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4442" PostTypeId="2" ParentId="1194" CreationDate="2016-02-20T11:30:02.187" Score="8" Body="&lt;p&gt;I had uninstalled evolution* packages (I thought I didn't need them) and the time indicator dissapeared&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reinstalled it with: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;logged out and everything went fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;also check: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1377/244&quot;&gt;https://elementaryos.stackexchange.com/a/1377/244&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="244" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-02-20T11:30:02.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4443" PostTypeId="1" CreationDate="2016-02-20T13:30:41.783" Score="2" ViewCount="578" Body="&lt;p&gt;My built in type cover is not working on Freya (0.3.2) running on the Microsoft Surface Pro 3.But my trackpad works perfectly. Both keyboard and trackpad work when using Windows 10 Pro. &lt;/p&gt;&#xA;" OwnerUserId="4180" LastActivityDate="2016-02-20T13:30:41.783" Title="My keyboard is not working on elementary OS" Tags="|release-freya|keyboard|microsoft-windows|surface-tablet|" AnswerCount="0" CommentCount="1" ClosedDate="2016-03-09T22:37:14.707" ContentLicense="CC BY-SA 3.0" />
  <row Id="4444" PostTypeId="2" ParentId="1285" CreationDate="2016-02-20T15:26:26.380" Score="1" Body="&lt;p&gt;I found &lt;a href=&quot;https://unix.stackexchange.com/a/81049&quot;&gt;a solution&lt;/a&gt; that fixed the default keyboard layout for me, but not the dropdown. At least I'm now able to login.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Run:&#xA;&lt;code&gt;$ sudo dpkg-reconfigure keyboard-configuration&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="227" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-02-20T15:34:32.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4445" PostTypeId="1" CreationDate="2016-02-20T15:59:00.570" Score="1" ViewCount="728" Body="&lt;p&gt;I have to install my printer for my school works. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="4181" LastActivityDate="2016-02-24T20:51:05.063" Title="How to install Canon IP2770 printer on elementary OS?" Tags="|drivers|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4446" PostTypeId="1" AcceptedAnswerId="4449" CreationDate="2016-02-20T16:00:12.437" Score="11" ViewCount="3111" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ioU9Y.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ioU9Y.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The top left icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No idea what can it be. I havent installed anything new, just when i started my computer it was there. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="26" LastEditDate="2016-09-25T16:19:07.430" LastActivityDate="2018-05-26T10:29:35.360" Title="How can I fix this strange icon in wingpanel?" Tags="|wingpanel|icons|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4447" PostTypeId="2" ParentId="4344" CreationDate="2016-02-20T19:27:45.510" Score="1" Body="&lt;p&gt;HP has recently been using only one antenna on a wireless card with two connectors.  Larry Finger with some help from Realtek came up with the solution&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git linux-headers-generic build essential&#xA;git clone git://github.com/lwfinger/rtlwifi_new.git&#xA;cd rtlwifi_new&#xA;git checkout rock.new_btcoex&#xA;make&#xA;sudo make install&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot. Then try&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -rv rtl8723be&#xA;sudo modprobe -v rtl8723be ant_sel=1&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check to see if wireless access points are detected&#xA;&lt;pre&gt;&lt;code&gt;iwlist scan | egrep -i 'ssid|signal'&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If nothing is detected or very weak signal, then try&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;sudo modprobe -rv rtl8723be&#xA;sudo modprobe -v rtl8723be ant_sel=2&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then test to check wifi signal strength&#xA;&lt;pre&gt;&lt;code&gt;iwlist scan | egrep -i 'ssid|signal'&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One or the other &lt;code&gt;ant_sel&lt;/code&gt; parameter settings should result in better wifi signal strength and you can set it with&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=X&quot; | sudo tee /etc/modprobe.d/rtl-ant-sel.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where X is either 1 or 2 based on what gave you better results&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2016-02-20T19:27:45.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4448" PostTypeId="1" CreationDate="2016-02-20T20:12:18.367" Score="2" ViewCount="127" Body="&lt;p&gt;In Elementary OS Freya (0.3.2), if an item is middle-clicked on in Window Overview (super + w), such as Google Chrome or Terminal, that process is closed/killed. Is there anyway to disable this feature?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="4189" LastActivityDate="2017-07-02T01:03:29.333" Title="How can I disable &quot;Middle-Click to Close&quot; in Window Overview?" Tags="|release-freya|window-management|multitasking-view|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4449" PostTypeId="2" ParentId="4446" CreationDate="2016-02-20T22:03:37.567" Score="10" Body="&lt;h3&gt;How to find out which application indicator is broken&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You can end the process of each application you are used to see wing-panel step by step and see when the broken indicator hides.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case it was the Dropbox indicator.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;How to fix the Dropbox indicator&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You can run the following script from Nathan Dyer to fix it:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/nathandyer/elementary-dropbox-mods&quot;&gt;https://github.com/nathandyer/elementary-dropbox-mods&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="227" LastEditDate="2016-02-24T07:20:57.210" LastActivityDate="2016-02-24T07:20:57.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4450" PostTypeId="1" CreationDate="2016-02-20T22:23:50.647" Score="1" ViewCount="144" Body="&lt;p&gt;Very frustrating, completely fresh installation, within minutes I get this error. happens on every reboot&lt;/p&gt;&#xA;" OwnerUserId="4190" LastActivityDate="2016-02-20T22:23:50.647" Title="Constant &quot;System program problem detected&quot; error on fresh install" Tags="|release-freya|" AnswerCount="0" CommentCount="2" ClosedDate="2016-02-24T20:47:23.513" ContentLicense="CC BY-SA 3.0" />
  <row Id="4455" PostTypeId="1" AcceptedAnswerId="4489" CreationDate="2016-02-21T06:04:32.573" Score="1" ViewCount="1741" Body="&lt;p&gt;hi i'm having a wifi issue, i have win7 and ElementaryOs (ubuntu 14.04) on my toshiba satellite c55-c5206s with a broadcom BCM943142Y and the wifi randomly disconnects, it doesnt happen while im in windows. Linux is updated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what i found, broadcom drivers are a little broken, and when wifi signal drop down from 55% the wireless constantly disconnects.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;help please, i really want to start using linux full time&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hw Info&#xA;&#xA;    &amp;gt; lspci -knn | grep Net  -A2  &#xA;&#xA;    07:00.0 Network controller [0280]:&#xA;    &amp;gt; Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) &#xA;    &amp;gt;   Subsystem: XAVi Technologies Corp. Device [1b9a:3002]   Kernel driver&#xA;    &amp;gt; in use: wl &#xA;&#xA;    &amp;gt; sudo lspci -knn  &#xA;&#xA;    00:00.0 Host bridge [0600]: Intel Corporation&#xA;    &amp;gt; Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)      Subsystem: Toshiba&#xA;    &amp;gt; America Info Systems Device [1179:f840]  00:02.0 VGA compatible&#xA;    &amp;gt; controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics&#xA;    &amp;gt; Controller [8086:0a16] (rev 0b)   Subsystem: Toshiba America Info&#xA;    &amp;gt; Systems Device [1179:f840]    Kernel driver in use: i915  00:03.0 Audio&#xA;    &amp;gt; device [0403]: Intel Corporation Haswell-ULT HD Audio Controller&#xA;    &amp;gt; [8086:0a0c] (rev 0b)      Subsystem: Toshiba America Info Systems Device&#xA;    &amp;gt; [1179:f840]   Kernel driver in use: snd_hda_intel  00:14.0 USB&#xA;    &amp;gt; controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31]&#xA;    &amp;gt; (rev 04)      Subsystem: Toshiba America Info Systems Device [1179:f840] &#xA;    &amp;gt;   Kernel driver in use: xhci_hcd  00:16.0 Communication controller&#xA;    &amp;gt; [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) &#xA;    &amp;gt;   Subsystem: Toshiba America Info Systems Device [1179:f840]      Kernel&#xA;    &amp;gt; driver in use: mei_me  00:1b.0 Audio device [0403]: Intel Corporation&#xA;    &amp;gt; 8 Series HD Audio Controller [8086:9c20] (rev 04)     Subsystem: Toshiba&#xA;    &amp;gt; America Info Systems Device [1179:f840]   Kernel driver in use:&#xA;    &amp;gt; snd_hda_intel  00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series&#xA;    &amp;gt; PCI Express Root Port 1 [8086:9c10] (rev e4)      Kernel driver in use:&#xA;    &amp;gt; pcieport  00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI&#xA;    &amp;gt; Express Root Port 3 [8086:9c14] (rev e4)      Kernel driver in use:&#xA;    &amp;gt; pcieport  00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI&#xA;    &amp;gt; Express Root Port 4 [8086:9c16] (rev e4)      Kernel driver in use:&#xA;    &amp;gt; pcieport  00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series PCI&#xA;    &amp;gt; Express Root Port 6 [8086:9c1a] (rev e4)      Kernel driver in use:&#xA;    &amp;gt; pcieport  00:1d.0 USB controller [0c03]: Intel Corporation 8 Series&#xA;    &amp;gt; USB EHCI #1 [8086:9c26] (rev 04)      Subsystem: Toshiba America Info&#xA;    &amp;gt; Systems Device [1179:f840]    Kernel driver in use: ehci-pci  00:1f.0&#xA;    &amp;gt; ISA bridge [0601]: Intel Corporation 8 Series LPC Controller&#xA;    &amp;gt; [8086:9c45] (rev 04)      Subsystem: Toshiba America Info Systems Device&#xA;    &amp;gt; [1179:f840]   Kernel driver in use: lpc_ich  00:1f.2 SATA controller&#xA;    &amp;gt; [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode]&#xA;    &amp;gt; [8086:9c03] (rev 04)      Subsystem: Toshiba America Info Systems Device&#xA;    &amp;gt; [1179:f840]   Kernel driver in use: ahci  00:1f.3 SMBus [0c05]: Intel&#xA;    &amp;gt; Corporation 8 Series SMBus Controller [8086:9c22] (rev 04) &#xA;    &amp;gt;   Subsystem: Toshiba America Info Systems Device [1179:f840]  07:00.0&#xA;    &amp;gt; Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n&#xA;    &amp;gt; [14e4:4365] (rev 01)      Subsystem: XAVi Technologies Corp. Device&#xA;    &amp;gt; [1b9a:3002]   Kernel driver in use: wl  08:00.0 Ethernet controller&#xA;    &amp;gt; [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express&#xA;    &amp;gt; Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)     Subsystem:&#xA;    &amp;gt; Toshiba America Info Systems Device [1179:f840]   Kernel driver in&#xA;    &amp;gt; use: r8169  09:00.0 Unassigned class [ff00]: Realtek Semiconductor&#xA;    &amp;gt; Co., Ltd. RTS5229 PCI Express Card Reader [10ec:5229] (rev 01) &#xA;    &amp;gt;   Subsystem: Toshiba America Info Systems Device [1179:f840]      Kernel&#xA;    &amp;gt; driver in use: rtsx_pci&#xA;    &amp;gt; - Device: wlan0  [#$%#$%#$%$%] ------------------------------------------------    Type:              802.11 WiFi    Driver:            wl    State:             connected    Default:           yes    HW Address:        #$%#$%#$%#$%#$&#xA;    &amp;gt; &#xA;    &amp;gt;   Capabilities: &#xA;    &amp;gt;     Speed:           72 Mb/s &#xA;    &amp;gt; &#xA;    &amp;gt;   Wireless Properties &#xA;    &amp;gt;     WEP Encryption:  yes &#xA;    &amp;gt;     WPA Encryption:  yes &#xA;    &amp;gt;     WPA2 Encryption: yes &#xA;    &amp;gt; &#xA;    &amp;gt;   Wireless Access Points (* = current AP) &#xA;    &amp;gt;     *%#$%#$%#$%:   Infra, #$%#$%#$%$#%$#%, Freq 2462 MHz, Rate 54 Mb/s, Strength 57 WPA2 &#xA;    &amp;gt; &#xA;    &amp;gt;   IPv4 Settings: &#xA;    &amp;gt;     Address:         192.168.1.101 &#xA;    &amp;gt;     Prefix:          24 (255.255.255.0) &#xA;    &amp;gt;     Gateway:         192.168.1.2 &#xA;    &amp;gt; &#xA;    &amp;gt;     DNS:             192.168.1.2 &#xA;    &amp;gt; &#xA;&amp;gt; - lshw&#xA;&amp;gt; *-network &#xA;&amp;gt;                 description: Ethernet interface &#xA;&amp;gt;                 product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller &#xA;&amp;gt;                 vendor: Realtek Semiconductor Co., Ltd. &#xA;&amp;gt;                 physical id: 0 &#xA;&amp;gt;                 bus info: pci@0000:08:00.0 &#xA;&amp;gt;                 logical name: eth0 &#xA;&amp;gt;                 version: 07 &#xA;&amp;gt;                 serial: #$%#$%#%$%#$&#xA;&amp;gt;                 size: 10Mbit/s &#xA;&amp;gt;                 capacity: 100Mbit/s &#xA;&amp;gt;                 width: 64 bits &#xA;&amp;gt;                 clock: 33MHz &#xA;&amp;gt;                 capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd&#xA;&amp;gt; autonegotiation &#xA;&amp;gt;                 configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half&#xA;&amp;gt; firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes&#xA;&amp;gt; port=MII speed=10Mbit/s &#xA;&amp;gt;                 resources: irq:46 ioport:3000(size=256) memory:a2404000-a2404fff memory:a2400000-a2403fff&#xA;&amp;gt; memory:8fb00000-8fb0ffff&#xA;&amp;gt; &#xA;&amp;gt; &#xA;&amp;gt; -&#xA;&amp;gt; &#xA;-&#xA;&#xA;&amp;gt; sudo iwconfig  eth0      no wireless extensions. &#xA;&amp;gt; &#xA;&amp;gt; wlan0     IEEE 802.11abg  ESSID:off/any   &#xA;&amp;gt;           Mode:Managed  Access Point: Not-Associated   Tx-Power=200 dBm    &#xA;&amp;gt;           Retry short limit:7   RTS thr:off   Fragment thr:off &#xA;&amp;gt;           Encryption key:off &#xA;&amp;gt;           Power Management:off &#xA;&amp;gt;             bridge0   no wireless extensions. &#xA;&amp;gt; &#xA;&amp;gt; lo        no wireless extensions.&#xA;list of solutions i try:&#xA;&#xA;apt-get update&#xA;&#xA;apt-get upgrade&#xA;&#xA;http://askubuntu.com/a/734963/509282&#xA;&#xA;http://askubuntu.com/a/129634/509282&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo rfkill list all&#xA;&#xA;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: brcmwl-0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;update:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i tested the conection with the router right beside me and still i have an unstable conection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;people with the same problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4451/having-some-wifi-erratic-behavior&quot;&gt;https://elementaryos.stackexchange.com/questions/4451/having-some-wifi-erratic-behavior&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4133/wifi-connection-dropping&quot;&gt;WiFi connection dropping&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3895/lose-wifi-signal-about-4-5-times-a-day&quot;&gt;https://elementaryos.stackexchange.com/questions/3895/lose-wifi-signal-about-4-5-times-a-day&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4187" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-24T12:26:39.813" Title="elementary OS freya wireless constantly disconnects" Tags="|release-freya|wifi|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4456" PostTypeId="1" CreationDate="2016-02-21T07:16:16.777" Score="2" ViewCount="147" Body="&lt;p&gt;I am using Elementary OS Freya 0.3.2 64 bit and since the beginning I have some issues with logs - my installed applications (dovecot, postfix, clamav and others) can't log properly simply because /var/log directory is recreated every time after I reboot the OS and it seems no new directories and files can be automatically created, so I get something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/cron.daily/logrotate:&#xA;error: stat of /var/log/clamav/clamav.log failed: No such file or directory&#xA;run-parts: /etc/cron.daily/logrotate exited with return code 1&#xA;/etc/cron.daily/trim:&#xA;/: 15232020480 bytes were trimmed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR: Problem with internal logger (UpdateLogFile = /var/log/clamav/freshclam.log).&#xA;ERROR: Can't open /var/log/clamav/freshclam.log in append mode (check permissions!).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I manually create those log files everything works until next reboot when I see they are all gone.&#xA;I tried to mess up with rsyslog and logrotate configs but nothing worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how /var/log looks like after reboot (notice the lack of dovecot, clamav, mail etc.):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -la /var/log&#xA;total 316&#xA;drwxr-xr-x  7 root root    260 lut 20 08:46 .&#xA;drwxr-xr-x 14 root root   4096 sty 16 15:11 ..&#xA;drwxrwxrwt  2 root root     40 lut 20 08:46 apt&#xA;-rw-r--r--  1 root root   5387 lut 20 08:46 boot.log&#xA;drwxr-xr-x  2 root root     60 lut 20 08:46 ConsoleKit&#xA;drwxr-x---  2 root lp      100 lut 20 08:46 cups&#xA;-rw-r--r--  1 root adm   62367 lut 20 08:46 dmesg&#xA;-rw-r--r--  1 root root      0 lut 20 08:46 dmesg.0&#xA;-rw-r--r--  1 root root   1542 lut 20 08:46 gpu-manager.log&#xA;drwx--x--x  2 root root     80 lut 20 08:46 lightdm&#xA;drwxr-xr-x  3 root root    180 lut 20 08:46 samba&#xA;-rw-r--r--  1 root root 192373 lut 20 08:46 udev&#xA;-rw-r--r--  1 root root  47347 lut 20 08:47 Xorg.0.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As I'm new to Linux I don't exactly know which configs come into play when dealing with logs but I guess those are the common. You can see some of my modifications for mail server for example. So I'm out of ideas what should I tweak now and asking for your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /etc/rsyslog.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/rsyslog.conf&#xA;#  /etc/rsyslog.conf    Configuration file for rsyslog.&#xA;#&#xA;#           For more information see&#xA;#           /usr/share/doc/rsyslog-doc/html/rsyslog_conf.html&#xA;#&#xA;#  Default logging rules can be found in /etc/rsyslog.d/50-default.conf&#xA;&#xA;&#xA;#################&#xA;#### MODULES ####&#xA;#################&#xA;&#xA;$ModLoad imuxsock # provides support for local system logging&#xA;$ModLoad imklog   # provides kernel logging support&#xA;#$ModLoad immark  # provides --MARK-- message capability&#xA;&#xA;# provides UDP syslog reception&#xA;#$ModLoad imudp&#xA;#$UDPServerRun 514&#xA;&#xA;# provides TCP syslog reception&#xA;#$ModLoad imtcp&#xA;#$InputTCPServerRun 514&#xA;&#xA;# Enable non-kernel facility klog messages&#xA;$KLogPermitNonKernelFacility on&#xA;&#xA;###########################&#xA;#### GLOBAL DIRECTIVES ####&#xA;###########################&#xA;&#xA;#&#xA;# Use traditional timestamp format.&#xA;# To enable high precision timestamps, comment out the following line.&#xA;#&#xA;$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat&#xA;&#xA;# Filter duplicated messages&#xA;$RepeatedMsgReduction on&#xA;&#xA;#&#xA;# Set the default permissions for all log files.&#xA;#&#xA;&#xA;$FileOwner syslog&#xA;$FileGroup adm&#xA;$FileCreateMode 0640&#xA;$DirCreateMode 0755&#xA;$Umask 0022&#xA;$PrivDropToUser syslog&#xA;$PrivDropToGroup syslog&#xA;&#xA;#&#xA;# Where to place spool and state files&#xA;#&#xA;$WorkDirectory /var/spool/rsyslog&#xA;&#xA;#&#xA;# Include all config files in /etc/rsyslog.d/&#xA;#&#xA;$IncludeConfig /etc/rsyslog.d/*.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ls /etc/rsyslog.d&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls /etc/rsyslog.d&#xA;20-ufw.conf  50-default.conf  50-default.conf~  postfix.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;cat /etc/rsyslog.d/50-default.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/rsyslog.d/50-default.conf&#xA;#  Default rules for rsyslog.&#xA;#&#xA;#           For more information see rsyslog.conf(5) and /etc/rsyslog.conf&#xA;&#xA;#&#xA;# First some standard log files.  Log by facility.&#xA;#&#xA;auth,authpriv.*         /var/log/auth.log&#xA;*.*;mail.none;mail.error;auth,authpriv.none     -/var/log/syslog&#xA;#cron.*             /var/log/cron.log&#xA;#daemon.*           -/var/log/daemon.log&#xA;kern.*              -/var/log/kern.log&#xA;#lpr.*              -/var/log/lpr.log&#xA;mail.*              -/var/log/mail.log&#xA;#user.*             -/var/log/user.log&#xA;&#xA;#&#xA;# Logging for the mail system.  Split it up so that&#xA;# it is easy to write scripts to parse these files.&#xA;#&#xA;mail.info           -/var/log/mail.info&#xA;mail.warn           -/var/log/mail.warn&#xA;mail.err            /var/log/mail.err&#xA;&#xA;#&#xA;# Logging for INN news system.&#xA;#&#xA;news.crit           /var/log/news/news.crit&#xA;news.err            /var/log/news/news.err&#xA;news.notice         -/var/log/news/news.notice&#xA;&#xA;#&#xA;# Some &quot;catch-all&quot; log files.&#xA;#&#xA;#*.=debug;\&#xA;#   auth,authpriv.none;\&#xA;#   news.none;mail.none -/var/log/debug&#xA;#*.=info;*.=notice;*.=warn;\&#xA;#   auth,authpriv.none;\&#xA;#   cron,daemon.none;\&#xA;#   mail,news.none      -/var/log/messages&#xA;&#xA;#&#xA;# Emergencies are sent to everybody logged in.&#xA;#&#xA;*.emerg                                :omusrmsg:*&#xA;&#xA;#&#xA;# I like to have messages displayed on the console, but only on a virtual&#xA;# console I usually leave idle.&#xA;#&#xA;#daemon,mail.*;\&#xA;#   news.=crit;news.=err;news.=notice;\&#xA;#   *.=debug;*.=info;\&#xA;#   *.=notice;*.=warn   /dev/tty8&#xA;&#xA;# The named pipe /dev/xconsole is for the `xconsole' utility.  To use it,&#xA;# you must invoke `xconsole' with the `-file' option:&#xA;# &#xA;#    $ xconsole -file /dev/xconsole [...]&#xA;#&#xA;# NOTE: adjust the list below, or you'll go crazy if you have a reasonably&#xA;#      busy site..&#xA;#&#xA;#daemon.*;mail.*;\&#xA;#   news.err;\&#xA;#   *.=debug;*.=info;\&#xA;#   *.=notice;*.=warn   |/dev/xconsole&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;cat /etc/rsyslog.d/postfix.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/rsyslog.d/postfix.conf &#xA;# Create an additional socket in postfix's chroot in order not to break&#xA;# mail logging when rsyslog is restarted.  If the directory is missing,&#xA;# rsyslog will silently skip creating the socket.&#xA;$AddUnixListenSocket /var/spool/postfix/dev/log &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;cat /etc/logrotate.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/logrotate.conf&#xA;# see &quot;man logrotate&quot; for details&#xA;# rotate log files weekly&#xA;weekly&#xA;&#xA;# use the syslog group by default, since this is the owning group&#xA;# of /var/log/syslog.&#xA;su root syslog&#xA;&#xA;# keep 4 weeks worth of backlogs&#xA;rotate 4&#xA;&#xA;# create new (empty) log files after rotating old ones&#xA;create&#xA;&#xA;# uncomment this if you want your log files compressed&#xA;#compress&#xA;&#xA;# packages drop log rotation information into this directory&#xA;include /etc/logrotate.d&#xA;&#xA;# no packages own wtmp, or btmp -- we'll rotate them here&#xA;/var/log/wtmp {&#xA;    missingok&#xA;    monthly&#xA;    create 0664 root utmp&#xA;    rotate 1&#xA;}&#xA;&#xA;/var/log/btmp {&#xA;    missingok&#xA;    monthly&#xA;    create 0660 root utmp&#xA;    rotate 1&#xA;}&#xA;&#xA;# system-specific logs may be configured here&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ls /etc/logrotate.d&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls /etc/logrotate.d&#xA;apache2   clamav-daemon     fail2ban         owncloud       samba                winbind&#xA;apport    clamav-freshclam  irony            ppp            speech-dispatcher&#xA;apt       consolekit        kolab-freebusy   roundcubemail  ufw&#xA;aptitude  cups-daemon       kolab-syncroton  rsyslog        unattended-upgrades&#xA;chwala    dpkg              mysql-server     rsyslog~       upstart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;cat /etc/logrotate.d/rsyslog&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/logrotate.d/rsyslog&#xA;/var/log/syslog&#xA;{&#xA;    rotate 7&#xA;    daily&#xA;    missingok&#xA;    notifempty&#xA;    delaycompress&#xA;    compress&#xA;    postrotate&#xA;        reload rsyslog &amp;gt;/dev/null 2&amp;gt;&amp;amp;1 || true&#xA;    endscript&#xA;}&#xA;&#xA;/var/log/dovecot.log {&#xA;    rotate 7&#xA;    daily&#xA;        create 0660 vmail vmail&#xA;    missingok&#xA;    notifempty&#xA;    delaycompress&#xA;    compress&#xA;}&#xA;&#xA;/var/log/mail.info&#xA;/var/log/mail.warn&#xA;/var/log/mail.err&#xA;/var/log/mail.log&#xA;/var/log/daemon.log&#xA;/var/log/kern.log&#xA;/var/log/auth.log&#xA;/var/log/user.log&#xA;/var/log/lpr.log&#xA;/var/log/cron.log&#xA;/var/log/debug&#xA;/var/log/messages&#xA;{&#xA;    rotate 4&#xA;    weekly&#xA;    missingok&#xA;    notifempty&#xA;    compress&#xA;    delaycompress&#xA;    sharedscripts&#xA;    postrotate&#xA;        reload rsyslog &amp;gt;/dev/null 2&amp;gt;&amp;amp;1 || true&#xA;    endscript&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4193" LastActivityDate="2016-02-21T07:16:16.777" Title="/var/log recreates to default after reboot on Freya" Tags="|release-freya|" AnswerCount="0" CommentCount="1" ClosedDate="2019-12-08T04:20:41.507" ContentLicense="CC BY-SA 3.0" />
  <row Id="4457" PostTypeId="2" ParentId="4397" CreationDate="2016-02-21T07:55:11.593" Score="0" Body="&lt;p&gt;First what comes in mind when correctly entered URL leads to a fake page is DNS settings. Did you check if the same behavior is present when you're trying to connect to your bank URL from other devices on the same LAN? I'd check DNS settings on the router, modem and laptop to see if they were altered by someone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also don't ever trust green padlock next to your site URL - when connecting to something such important as a bank account I'd always check the server certificate and the issuer. Believe me, I experienced it myself at work where employer installed his own root CA to sniff encrypted communication... and there is always famous Lenovo scandal with SuperFish ;)&lt;/p&gt;&#xA;" OwnerUserId="4193" LastActivityDate="2016-02-21T07:55:11.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4458" PostTypeId="2" ParentId="2611" CreationDate="2016-02-21T08:04:12.717" Score="3" Body="&lt;p&gt;I had such an issue on my Freya HTPC installation. It was caused by some unsuccessful Nvidia driver installation. I fixed that by &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which reverted to standard driver.&lt;/p&gt;&#xA;" OwnerUserId="4193" LastActivityDate="2016-02-21T08:04:12.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4462" PostTypeId="1" CreationDate="2016-02-21T23:33:37.803" Score="-1" ViewCount="118" Body="&lt;p&gt;Hello so I have a AMD APU with a Radeon in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed the proprietary drivers via software sources, but I had some problems with them, so I switched back to the stock ones. A few days after that I switched back to prop drivers the same way, but this time the (updates) ones, since I need CS:GO fps ;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That worked okay, but every startup it would take a few seconds longer than normal for the gui to show up. It did work well for some time like that.&lt;br&gt;&#xA;I didn't investigate it further because way earlier I had completely broken my xorg and stuff with the AMD drivers and the script, so I was just happy it was working now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few minutes ago I did updates and upgrades and rebooted, after that I couldn't get into GUI again. Waiting obviously didn't work anymore, I did see that the apt-get update did update the &lt;code&gt;fglx&lt;/code&gt; drivers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now I am stuck in console and can't even access the internet to install stuff etc. because I am using a wifi dongle. I did get it working via command line last time, but only with wep so I had to change the routers settings etc, this time I am asking you earlier so maybe I can avoid that. Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="4198" LastEditorUserId="3757" LastEditDate="2016-05-05T14:46:23.627" LastActivityDate="2016-05-05T14:46:23.627" Title="After fglx update can't use gui" Tags="|release-freya|drivers|amd|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4463" PostTypeId="1" CreationDate="2016-02-22T00:25:58.140" Score="5" ViewCount="261" Body="&lt;p&gt;If press &quot;Win+W&quot; or &quot;Win+A&quot;, it opens a multitasking view. How rechange this hotkey to mouse key? Exp &quot;LeftClick + RightClick&quot; or &quot;Middle Button + Right&quot;.&lt;/p&gt;&#xA;" OwnerUserId="4199" LastActivityDate="2019-04-22T03:02:55.530" Title="Rechange hotkey from keyboard to mouse" Tags="|keyboard|mouse|multitasking-view|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4464" PostTypeId="1" CreationDate="2016-02-22T00:54:45.920" Score="0" ViewCount="208" Body="&lt;p&gt;I have purchased an Asus Zenbook UX305CA with an Elan 1000 trackpad using the I2C bus. Due to a timing error, the trackpad is nonfunctional in most kernels. If I compile a modified 4.5 kernel to resolve the problem, how will that change my elementary OS experience? Will I have trouble with updating packages or the operating system itself? Will a kernel modification fundamentally change the way elementary OS works?&lt;/p&gt;&#xA;" OwnerUserId="4200" LastEditorUserId="37" LastEditDate="2016-02-23T15:37:49.260" LastActivityDate="2016-02-24T20:58:36.710" Title="What are the effects of a custom kernel?" Tags="|system-installation|system|kernel|" AnswerCount="1" CommentCount="2" ClosedDate="2016-02-24T20:58:43.257" ContentLicense="CC BY-SA 3.0" />
  <row Id="4465" PostTypeId="1" CreationDate="2016-02-22T12:20:56.417" Score="2" ViewCount="130" Body="&lt;p&gt;I have Elementary OS Freya on my desktop computer. I installed some applications, which appear in toolbar (dropbox, steam, xneur, ...). But when I open an context menu from toolbar icon and select any item, then nothing happens. Sometimes it repeats with language indicator. What's wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I think I found the cause of the problem. I tried to open the menu options via right-click. Left mouse button works successfully. Does anyone know how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="4204" LastEditorUserId="4204" LastEditDate="2016-02-22T19:44:52.737" LastActivityDate="2016-02-22T19:44:52.737" Title="Context menu of toolbar icon doesn't work" Tags="|release-freya|applications|menu|wingpanel|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-28T18:56:30.140" ContentLicense="CC BY-SA 3.0" />
  <row Id="4467" PostTypeId="1" AcceptedAnswerId="4731" CreationDate="2016-02-22T19:12:00.687" Score="1" ViewCount="832" Body="&lt;p&gt;I followed the instructions given &lt;a href=&quot;https://elementaryos.stackexchange.com/a/252/4192&quot;&gt;here&lt;/a&gt; to add a folder / stack to my dock, but I can't seem to add the folder to the dock. It opens in the application it is dropped on, and no space is created for it.&lt;/p&gt;&#xA;" OwnerUserId="4192" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-13T13:03:58.903" Title="How to drag folder to plank" Tags="|plank|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4471" PostTypeId="1" CreationDate="2016-02-23T09:32:54.300" Score="1" ViewCount="122" Body="&lt;p&gt;I've installed the suggested updates today, as usual, and rebooted.&#xA;The boot progress is pending with a black screen, and I can't even switch to console with CTRL-ALT-F1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, I managed to boot in recovery mode, I installed updates via console, it did not help much.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I continue booting, I get a console login, when I type &lt;code&gt;startx&lt;/code&gt;, I'll get an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;no screens found.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this maybe the problem? If not, what else could I do to roll back the updates, or finding the reason?&lt;/p&gt;&#xA;" OwnerUserId="3744" LastActivityDate="2016-02-23T09:32:54.300" Title="Black screen after updates + reboot" Tags="|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4472" PostTypeId="1" AcceptedAnswerId="5192" CreationDate="2016-02-23T10:33:34.830" Score="0" ViewCount="175" Body="&lt;p&gt;I have installed Foobar2000 in Playonlinux (ElementaryOS) and all it can play are radio internet streams.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All files give the error &lt;code&gt;Unable to open item for playback (Unsupported file format):&lt;/code&gt; - even common formats like mp3.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Along Foobar2000 I also installed Winamp to see if that works: yes, it does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Foobar installed in a similar manner in another Linux installed in multiple boot (in Mint 17.2 KDE) and there it all works fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I investigate what is different between the two systems?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-04-22T14:08:52.140" Title="Foobar2000 in Playonlinux cannot play common sound formats" Tags="|wine|playonlinux|audio-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4474" PostTypeId="1" CreationDate="2016-02-23T12:43:16.980" Score="1" ViewCount="514" Body="&lt;p&gt;I had changed resolution of the monitor from 75Hz to 60Hz and clicked a button &quot;Save to X Configuration File&quot; and saved into /ets/X11/xorg.conf as administrator. After restarting I still see 75Hz instead of 60Hz.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2016-02-23T12:43:16.980" Title="How to save NVIDIA X Server Settings (nvidia-settings)?" Tags="|release-freya|settings|nvidia|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4475" PostTypeId="2" ParentId="4420" CreationDate="2016-02-23T14:18:35.460" Score="1" Body="&lt;p&gt;No, there isn't any version of wingpanel available that suits your request. In fact, there is no active fork of wingpanel anymore. You can find a bit more information &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/910/how-to-install-wingpanel-slim-or-super-wingpanel-on-elementary-0-3-freya-amd64/912#912&quot;&gt;here&lt;/a&gt;. Both popular wingpanel forks are abandoned.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-02-23T14:18:35.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4478" PostTypeId="1" CreationDate="2016-02-23T18:43:43.123" Score="1" ViewCount="81" Body="&lt;p&gt;I have been a long time Ubuntu user. 3 weeks ago, I decided to give Elementary OS a try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My initial experience was pretty good, but after the following changes, I was very happy.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary Tweaks to enable OSX style window controls&lt;/li&gt;&#xA;&lt;li&gt;Misc. GUI tweaks&lt;/li&gt;&#xA;&lt;li&gt;Linux 4.1.2 kernel (Really speeds up the whole OS.. Highly&#xA;recommended)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The biggest issue that I am running into is with the tray icons. For example, I am trying to use the Citrix Receiver to access my enterprise application. The application installs fine, but the tray icon is non-existent. If you launch the application, it works great until you close it. After closing it, there application continues to run in the background thinking that you can just click on the tray icon(which we don't have). I have tried killing all of the Receiver processes, but you have to physically restart the whole machine before you can use Receiver again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas why this is happening? I would love to use this more in the Enterprise, but this one little problem is what prevents me from moving forward.&lt;/p&gt;&#xA;" OwnerUserId="4227" LastActivityDate="2016-02-23T18:43:43.123" Title="Elementary OS and Tray Icons" Tags="|release-freya|icons|wingpanel|" AnswerCount="0" CommentCount="0" ClosedDate="2016-02-24T20:49:52.793" ContentLicense="CC BY-SA 3.0" />
  <row Id="4479" PostTypeId="2" ParentId="4464" CreationDate="2016-02-23T22:28:25.950" Score="1" Body="&lt;p&gt;I had same issue, with a different Asus model, fixed by adding &lt;code&gt;i8042.nomux i8042.reset&lt;/code&gt; to the kernel boot options in &lt;code&gt;/etc/grub/default&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4208" LastEditorUserId="26" LastEditDate="2016-02-24T20:58:36.710" LastActivityDate="2016-02-24T20:58:36.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4481" PostTypeId="1" CreationDate="2016-02-24T03:25:52.693" Score="0" ViewCount="94" Body="&lt;p&gt;I installed Oracle Java on my system. All I wanted was access to the java and javac commands for the command line. However, I noticed that in the application menu four new programs showed up: &quot;Oracle Java 8 Console,&quot; &quot;Oracle Java 8 Mission Control,&quot; &quot;Oracle Java 8 VisualVM,&quot; &quot;Oracle Java 8 Web Start.&quot; How do I remove these applications from the applications menu, or better yet, how would I remove them from my system altogether (if that would be possible without hurting my ability to compile and run java programs)?&lt;/p&gt;&#xA;" OwnerUserId="4235" LastActivityDate="2016-02-24T16:05:42.390" Title="Removing Oracle Java Programs from Applications menu" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-24T20:57:47.460" ContentLicense="CC BY-SA 3.0" />
  <row Id="4483" PostTypeId="1" AcceptedAnswerId="4904" CreationDate="2016-02-24T12:38:02.890" Score="4" ViewCount="7450" Body="&lt;p&gt;I've used Lubuntu for years and felt happy with it. The OS is clear and fast. However, I really like the look of Elementary OS. One thing that stops me is that my computer is not a decent one. A Core 2 Duo might not be good enough for gaming when composite is enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, are there any ways to disable composite, effects and hot corners too? I would really appreciate.&lt;/p&gt;&#xA;" OwnerUserId="4240" LastActivityDate="2017-02-22T18:38:27.480" Title="How can I disable composite and effects in Elementary OS?" Tags="|window-manager|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4485" PostTypeId="1" AcceptedAnswerId="4494" CreationDate="2016-02-24T14:35:20.257" Score="-1" ViewCount="413" Body="&lt;p&gt;I open Printers in Settings. I click Print Test Page. The tasks are updated. The task is marked as completed as seen in &lt;a href=&quot;http://localhost:631/printers/HP-LaserJet-P1006?which_jobs=all&quot; rel=&quot;nofollow&quot;&gt;http://localhost:631/printers/HP-LaserJet-P1006?which_jobs=all&lt;/a&gt;&#xA;Nothing is printed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I check the driver?&lt;br&gt;&#xA;How to make sure the driver is correct?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The printer is installing on its own but I don't know if it gets the right driver. The problem started with first printing on elementary os when I printed pages 15-17 from pdf and the printer printed only 1 page, returned 2nd page as white and stopped because the paper was gone. I didn't receive any message to refill the paper, but I did so. The printer didn't continue to print next pages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to Reactivate HP LaserJet 1018/1020 after reloading paper?&lt;/p&gt;&#xA;" OwnerUserId="4243" LastEditorUserId="26" LastEditDate="2016-02-24T20:45:20.723" LastActivityDate="2016-02-24T22:11:56.470" Title="HP-LaserJet-P1006 does not print and shows completed" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4486" PostTypeId="2" ParentId="4435" CreationDate="2016-02-24T15:23:31.840" Score="1" Body="&lt;p&gt;The blue screen was simply because Windows did not have the drivers installed for the mouse and keyboard I had connected (which ironically, was the Microsoft Sculpt mouse and keyboard). Once I disconnected them, I was able to boot without error. Once booted, I re-connected the mouse and keyboard, and the drivers were automatically installed. Now I can boot with and without the mouse and keyboard connected.&lt;/p&gt;&#xA;" OwnerUserId="4169" LastActivityDate="2016-02-24T15:23:31.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4487" PostTypeId="2" ParentId="3282" CreationDate="2016-02-24T15:45:51.450" Score="1" Body="&lt;p&gt;I got the same error on my first attempt at using elementary OS. Turned out that my install media (USB install disk) had mot been written properly. I just reinstalled the .iso file onto the same usb stick and everything worked smooth as butter.&lt;/p&gt;&#xA;" OwnerUserId="4244" LastEditorUserId="26" LastEditDate="2016-02-24T20:41:45.990" LastActivityDate="2016-02-24T20:41:45.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4488" PostTypeId="2" ParentId="4481" CreationDate="2016-02-24T16:05:42.390" Score="1" Body="&lt;p&gt;Fast: Click right in file icon and run &quot;New windows as Administrator&quot; put the password and go to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find the java icons that you want to remove and done&lt;/p&gt;&#xA;" OwnerUserId="2382" LastActivityDate="2016-02-24T16:05:42.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4489" PostTypeId="2" ParentId="4455" CreationDate="2016-02-24T17:24:56.507" Score="0" Body="&lt;p&gt;after days searching for a solution, no solution found so far, so i give up.&lt;/p&gt;&#xA;" OwnerUserId="4187" LastActivityDate="2016-02-24T17:24:56.507" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4491" PostTypeId="2" ParentId="4446" CreationDate="2016-02-24T18:09:28.920" Score="5" Body="&lt;p&gt;Also, you can know which applications are using indicators (other than the &lt;em&gt;elementaryOS&lt;/em&gt; defaults) executing on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --type=method_call --print-reply --dest=com.canonical.indicator.application /com/canonical/indicator/application/service com.canonical.indicator.application.service.GetApplications | grep &quot;object path&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See the output to find what applications are running with an indicator.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-24T18:09:28.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4492" PostTypeId="1" CreationDate="2016-02-24T18:17:08.453" Score="1" ViewCount="177" Body="&lt;p&gt;I installed the latest version of elementary OS from the site. I loved it but am having lots of trouble! Lots of crashes, hanging, and sometimes Applications menu (in the top left) doesn't respond. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed it alongside W10. My laptop is MSI Gp60 2pe. Help me, please. I don't wanna break up with this beauty. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GlI9B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GlI9B.png&quot; alt=&quot;Pic&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4247" LastEditorUserId="5565" LastEditDate="2016-10-07T02:22:02.627" LastActivityDate="2016-10-07T02:22:02.627" Title="Freya applications menu doesn't respond (&quot;System program problem detected&quot;)" Tags="|release-freya|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4493" PostTypeId="2" ParentId="4445" CreationDate="2016-02-24T20:51:05.063" Score="1" Body="&lt;p&gt;The printer family IP2700 have driver for Ubuntu and derivates in Canonical repositories. So you can installing it from Configuration -&gt; Printers -&gt; Add new printer&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-02-24T20:51:05.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4494" PostTypeId="2" ParentId="4485" CreationDate="2016-02-24T22:11:56.470" Score="1" Body="&lt;p&gt;i have tried a lot different stuff.&#xA;I uninstalled Hplip and Reactive HP LaserJet 1018/1020 after reloading paper. (strange packet name, huh?)&#xA;It worked by default adding printer via Settings / Printers.&lt;/p&gt;&#xA;" OwnerUserId="4243" LastActivityDate="2016-02-24T22:11:56.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4495" PostTypeId="1" CreationDate="2016-02-24T23:23:39.367" Score="1" ViewCount="183" Body="&lt;p&gt;So i was checking dell.com store and they sell a lot of laptops with Ubuntu as default OS, I was wondering if there is any good machine out there for elementary OS i have a Dell XPS 15 9530 and it runs okay, but suddenly the screen zooms  like X50 and I only see like 10 characters on my screen, so it has video card issues i guess, any recommendations are greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="4249" LastActivityDate="2016-08-26T22:55:05.847" Title="best rigs for installing Elementaty OS" Tags="|system-installation|hardware|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-22T00:46:48.160" ContentLicense="CC BY-SA 3.0" />
  <row Id="4497" PostTypeId="1" CreationDate="2016-02-25T04:36:13.690" Score="3" ViewCount="2652" Body="&lt;p&gt;Is there a distribution of elementary OS that I can use for installation on a Surface Pro 3 with full support for touchpad and Wi-Fi?&lt;/p&gt;&#xA;" OwnerUserId="4253" LastEditorUserId="5565" LastEditDate="2016-10-06T20:40:07.143" LastActivityDate="2018-04-23T10:37:24.590" Title="Installation on a Surface Pro 3" Tags="|software-installation|surface-tablet|" AnswerCount="2" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4500" PostTypeId="1" AcceptedAnswerId="4543" CreationDate="2016-02-25T14:48:57.073" Score="3" ViewCount="5262" Body="&lt;p&gt;I want to use a finger print reader device to log in from the Greeter(lock screen). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;a href=&quot;https://launchpad.net/~fingerprint&quot; rel=&quot;nofollow noreferrer&quot;&gt;fprint&lt;/a&gt;, which made it possible to use it instead of sudo password, but is it possible to unlock the elementary lockscreen with it? (I suppose fprint works in Ubuntu, but I guess that elementary uses something different for a lockscreen).&lt;/p&gt;&#xA;" OwnerUserId="78" LastEditorUserId="19798" LastEditDate="2020-03-26T07:13:51.440" LastActivityDate="2020-03-26T16:59:15.263" Title="How to log in into elementary using fingerprint scanner?" Tags="|greeter|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="4501" PostTypeId="1" AcceptedAnswerId="4507" CreationDate="2016-02-25T16:15:33.223" Score="0" ViewCount="280" Body="&lt;p&gt;I have installed Chrome using this steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Add Key&lt;/li&gt;&#xA;&lt;li&gt;Set repository&lt;/li&gt;&#xA;&lt;li&gt;Install package using apt-get&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But it didn’t start after I have clicked on new icon. After that I ran apt-upgrade. Then I decided to reboot system. If I remember right system froze and possibly KDE error appeared multiple times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now OS stops booting. It shows only on black screen with several messages that some services started and stopped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So question is how to restore system to working state if it is possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPD&lt;/strong&gt; On the black screen there is message above others &quot;could not write bytes: Broken pipe&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPD 2.&lt;/strong&gt; Have found solution! &lt;/p&gt;&#xA;" OwnerUserId="4261" LastEditorUserId="3757" LastEditDate="2016-04-26T02:44:25.317" LastActivityDate="2016-04-26T02:44:48.083" Title="elementary OS crashed and doesn’t boot" Tags="|boot|google-chrome|updates|crash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4502" PostTypeId="2" ParentId="4492" CreationDate="2016-02-25T17:07:27.233" Score="1" Body="&lt;p&gt;This problem is a known issue of Ubuntu, inherited by Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution to that message is to open a terminal and paste the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service apport stop ; sudo sed -i 's/enabled=1/enabled=0/g' /etc/default/apport&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot your system and the error message should be gone forever :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="4260" LastActivityDate="2016-02-25T17:07:27.233" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4504" PostTypeId="2" ParentId="4501" CreationDate="2016-02-25T18:24:24.377" Score="0" Body="&lt;p&gt;Are you by chance running elementary OS in a VM? Apparently there's a problem with the latest Ubuntu update (14.04.2, using kernel 3.19.0-51) that's causing virtual machines to fail on boot. The solution is to boot using an earlier version of the kernel. More info here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2314723&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuforums.org/showthread.php?t=2314723&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4266" LastEditorUserId="3757" LastEditDate="2016-04-26T02:44:48.083" LastActivityDate="2016-04-26T02:44:48.083" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4505" PostTypeId="1" AcceptedAnswerId="4509" CreationDate="2016-02-25T20:15:31.593" Score="3" ViewCount="451" Body="&lt;p&gt;Is there a way to subscribe to elementary's official blog located at &lt;a href=&quot;http://blog.elementary.io/&quot; rel=&quot;nofollow&quot;&gt;http://blog.elementary.io/&lt;/a&gt;? Email or RSS feed are preferred methods. elementary's blog looks like it's using Tumblr, but I would really like to avoid creating Tumblr account.&lt;/p&gt;&#xA;" OwnerUserId="456" LastEditorUserId="3757" LastEditDate="2016-05-06T14:12:41.247" LastActivityDate="2016-05-06T14:12:41.247" Title="elementary OS Website Blog RSS feed" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4506" PostTypeId="2" ParentId="3186" CreationDate="2016-02-25T22:45:27.860" Score="0" Body="&lt;p&gt;You can do this quite quick with some commands.&#xA;First you need the uid of your &quot;old admin&quot; and &quot;new admin&quot; account:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ id -u old-admin&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ id -u new-admin&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let's say &quot;old uid&quot; is 1000 and &quot;new uid&quot; is 2000, the command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ find /home -uid 1000 -exec chown 2000 {} \;&lt;/code&gt; (probably you will need sudo) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;will change the ownership of all files owned by &quot;old-admin&quot; recursively in &lt;code&gt;/home&lt;/code&gt; to &quot;new-admin&quot;.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-02-25T22:45:27.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4507" PostTypeId="2" ParentId="4501" CreationDate="2016-02-25T23:25:02.267" Score="0" Body="&lt;p&gt;Have found that some packages were not installed due to lack of space in temp folders.&#xA;So here are steps that helped me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I ran command inspired by this article &lt;a href=&quot;http://forum.ubuntu.ru/index.php?PHPSESSID=qcih2nd2v525mms9q8clt1i9k4&amp;amp;topic=216029&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; &lt;code&gt;sudo apt-get -f install&lt;/code&gt;. I found that there was message &quot;&lt;em&gt;The following packages have been kept back&lt;/em&gt;&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Then I tried &lt;code&gt;sudo apt-get install &amp;lt;list of packages kept back&amp;gt;&lt;/code&gt; from this &lt;a href=&quot;https://askubuntu.com/questions/601/the-following-packages-have-been-kept-back-why-and-how-do-i-solve-it&quot;&gt;post&lt;/a&gt; and found from multiple messages that &lt;code&gt;cp: failed to extend ‘/tmp...&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;It appeared that &lt;code&gt;overflow&lt;/code&gt; at &lt;code&gt;/tmp&lt;/code&gt; was 100%. So the last few steps were to use &lt;code&gt;sudo umount /tmp&lt;/code&gt; from this &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2281539&quot; rel=&quot;nofollow noreferrer&quot;&gt;thread&lt;/a&gt; and to run &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4261" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-02-25T23:25:02.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4508" PostTypeId="2" ParentId="4497" CreationDate="2016-02-25T23:48:52.677" Score="3" Body="&lt;p&gt;As @Suici recommended, you should try to run it from the USB to see if your hardware is compatible (out-of-the-box, anyway). If you're unfamiliar with the procedure, when booting from the installation USB of elementary, you can choose to either install it right away, or try it. If you choose to try it, elementary will run full-blown operating system from the USB, and at that moment you can see what works and what doesn't. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will probably work, since Linux has great hardware support, the only thing that may not work is the touchscreen, but I may be wrong (I never tried installing to a touchscreen device). &lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-02-25T23:48:52.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4509" PostTypeId="2" ParentId="4505" CreationDate="2016-02-26T00:54:01.377" Score="5" Body="&lt;p&gt;the RSS url that you need is this: &lt;a href=&quot;http://blog.elementary.io/rss&quot;&gt;http://blog.elementary.io/rss&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2382" LastActivityDate="2016-02-26T00:54:01.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4511" PostTypeId="1" CreationDate="2016-02-26T12:42:23.913" Score="3" ViewCount="112" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LQBPf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LQBPf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After updates my Freya system got a new kernel 3.19.0-51; but after restart Freya booting hangs with this kernel version&#xA;please see the kernel message below where it hangs &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is booting properly with kernel 3.19.0-49-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I wait till the next kernel update?&lt;/p&gt;&#xA;" OwnerUserId="4273" LastActivityDate="2016-03-05T05:53:48.487" Title="Freya with kernel 3.19.0-51 fails to boot" Tags="|release-freya|kernel|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4512" PostTypeId="1" AcceptedAnswerId="4517" CreationDate="2016-02-26T15:18:25.420" Score="0" ViewCount="302" Body="&lt;p&gt;I have Freya installed on an Acer Aspire 1410 and I am having issues with the wireless connection on my home network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The odd thing is, I have a perfect connection at my local coffee shop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had seen some articles talking about changing the MTU and that hasn't seemed to help me. The connection at my home will constantly disconnect or be very slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Running sudo lshw -C network brings up:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network&#xA;   description: Wireless interface&#xA;   product: Centrino Wireless-N 1000 [Condor Peak]&#xA;   vendor: Intel Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:02:00.0&#xA;   logical name: wlan0&#xA;   version: 00&#xA;   serial: 00:1e:64:17:24:3e&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=iwlwifi driverversion=3.19.0-47-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:28 memory:92500000-92501fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit 2: I followed the steps and did this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    rob@rob-Aspire-1410:~/Downloads$ tar -xvf iwlwifi-1000-ucode-39.31.5.1.tgz&#xA;iwlwifi-1000-ucode-39.31.5.1/&#xA;iwlwifi-1000-ucode-39.31.5.1/README.iwlwifi-1000-ucode&#xA;iwlwifi-1000-ucode-39.31.5.1/iwlwifi-1000-5.ucode&#xA;iwlwifi-1000-ucode-39.31.5.1/LICENSE.iwlwifi-1000-ucode&#xA;rob@rob-Aspire-1410:~/Downloads$ sudo cp iwlwifi-1000-ucode-39.31.5.1/iwlwifi-1000-5.ucode /lib/firmware &#xA;[sudo] password for rob: &#xA;rob@rob-Aspire-1410:~/Downloads$ sudo cp iwlwifi-1000-ucode-39.31.5.1/iwlwifi-1000-5.ucode /lib/firmware &#xA;rob@rob-Aspire-1410:~/Downloads$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running the first command yields&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network&#xA;   description: Wireless interface&#xA;   product: Centrino Wireless-N 1000 [Condor Peak]&#xA;   vendor: Intel Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:02:00.0&#xA;   logical name: wlan0&#xA;   version: 00&#xA;   serial: 00:1e:64:17:24:3e&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=iwlwifi driverversion=3.19.0-47-generic firmware=39.31.5.1 build 35138 ip=192.168.0.108 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:28 memory:92500000-92501fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How do I know if I followed the steps correctly and it worked? I am currently on my home network and haven't had any drops yet so that is promising. P.S. Thank you for your help!&lt;/p&gt;&#xA;" OwnerUserId="3939" LastEditorUserId="3939" LastEditDate="2016-02-27T14:59:01.130" LastActivityDate="2016-02-27T14:59:01.130" Title="Wireless Connectivity Issues on Some Networks - Acer Aspire 1410 - Solved" Tags="|networking|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4515" PostTypeId="1" CreationDate="2016-02-26T21:06:59.937" Score="1" ViewCount="444" Body="&lt;p&gt;After updating and restarting elementary OS Freya hangs on the logo screen.&#xA;I figured out that the problem cause VMware tools.&#xA;&lt;br&gt;&#xA;I assume that this guide should help fix it:&#xA;&lt;a href=&quot;https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&amp;amp;cmd=displayKC&amp;amp;externalId=2050592&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&amp;amp;cmd=displayKC&amp;amp;externalId=2050592&lt;/a&gt;&#xA;&lt;br&gt;&lt;br&gt;&#xA;But to use it I somehow should boot system with terminal. I tried to boot with live cd (try elementary before install it), mounted system partition, but when I run the config file (/usr/bin/vmware-config-tools.pl), I got an error (system could find libraries and kernel files), and I suppose that this error occurs because I ran the script from the live cd OS.&#xA;&lt;br&gt;&lt;br&gt;&#xA;Any ideas how can I recover it?&#xA;&lt;br&gt;&#xA;(Might actually be a dupe of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4511/freya-with-kernel-3-19-0-51-fails-to-boot&quot;&gt;Freya with kernel 3.19.0-51 fails to boot&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="4276" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-08-02T11:53:06.007" Title="VMware tools failing elementary OS freya to boot up after a kernel update" Tags="|release-freya|boot|kernel|virtualization|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4516" PostTypeId="2" ParentId="4515" CreationDate="2016-02-26T22:02:08.550" Score="1" Body="&lt;p&gt;There's a known problem with running the Ubuntu 3.19.0-51 kernel under VMWare:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2314723&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuforums.org/showthread.php?t=2314723&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this is the problem you're experiencing, but the symptoms are all the same. The current solution is to revert to an earlier kernel.&lt;/p&gt;&#xA;" OwnerUserId="4266" LastActivityDate="2016-02-26T22:02:08.550" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4517" PostTypeId="2" ParentId="4512" CreationDate="2016-02-26T22:47:22.407" Score="0" Body="&lt;p&gt;You can try updating the wifi driver with a newer version from &lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/Drivers/iwlwifi&quot; rel=&quot;nofollow&quot;&gt;Wiki Kernel: iwlwifi&lt;/a&gt;. To your N-1000 card and kernel 3.19 you must download the next file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-1000-ucode-39.31.5.1.tgz&quot; rel=&quot;nofollow&quot;&gt;iwlwifi 1000&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, go to your  Downloads folder and open a terminal. Untar the file with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tar -xvf iwlwifi-1000-*.tar.gz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you must copy the new firmware. Again from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp iwlwifi-1000-ucode-39.31.5.1/iwlwifi-1000-*.ucode /lib/firmware &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That wireless card should drop occasionally with 11n connection,  so execute from terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; echo &quot;options iwlwifi 11n_disable=1&quot; | sudo tee /etc/modprobe.d/iwlwifi.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot the system and check your wireless connection. &lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-02-27T09:06:31.153" LastActivityDate="2016-02-27T09:06:31.153" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4518" PostTypeId="2" ParentId="4515" CreationDate="2016-02-26T23:09:04.527" Score="1" Body="&lt;p&gt;So I fixed it by booting with previous version of kernel (hit escape two times, choose advanced options and pick any kernel you want) and then removing the latest kernel version (which wasn't good for the vmware tools) with Synaptic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This article will tell you more: &lt;a href=&quot;https://askubuntu.com/questions/106031/how-can-i-remove-new-kernel-versions-after-downgrading&quot;&gt;https://askubuntu.com/questions/106031/how-can-i-remove-new-kernel-versions-after-downgrading&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4276" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-02-26T23:09:04.527" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4520" PostTypeId="1" CreationDate="2016-02-26T23:31:14.917" Score="0" ViewCount="2095" Body="&lt;p&gt;When I run an app on terminal I can, but I get the next error&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How I can fix this?&lt;/p&gt;&#xA;" OwnerUserId="4278" LastActivityDate="2016-02-27T00:55:16.260" Title="&quot;pantheon-filechooser-module&quot; error on Elementary OS Freya" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2016-02-29T10:56:49.500" ContentLicense="CC BY-SA 3.0" />
  <row Id="4521" PostTypeId="2" ParentId="4520" CreationDate="2016-02-27T00:55:16.260" Score="1" Body="&lt;p&gt;This will happen for any non-gtk3 app. It is a non-fatal warning and can be ignored&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-02-27T00:55:16.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4522" PostTypeId="1" AcceptedAnswerId="4742" CreationDate="2016-02-27T06:26:16.490" Score="0" ViewCount="141" Body="&lt;p&gt;Samsung R580 Laptop  (Intel i5 Quad Core, 2.27 GHz)&#xA;elementary OS 0.3.2 Freya (64-bit)&#xA;Single Boot Machine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently upgraded (using the Software Updater) to Kernel 3.19.0-51. After upgrade, the laptop will not boot normally. It falls down to a (initramfs) prompt. When I try to go into the recovery mode, I see the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;/dev/mapper/elementary--vg-root does not exist&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anybody seen this after an upgrade?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. My old kenel 3.19.0-49 still boots fine, and I can boot into it by using the Grub menus.&lt;/p&gt;&#xA;" OwnerUserId="4280" LastEditorUserId="4280" LastEditDate="2016-02-27T06:35:28.880" LastActivityDate="2016-05-15T10:15:11.947" Title="Freya does not boot after kernel 3.19.0-51 update" Tags="|release-freya|boot|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4523" PostTypeId="1" CreationDate="2016-02-27T11:27:01.490" Score="3" ViewCount="549" Body="&lt;p&gt;I just got a new 6th Gen machine and installed Elementary OS in it. Things are a lot unstable. VLC crash, my editor Brackets crash, system hangs. Might be related to graphics? Im not using an external GPU. How can I fix this? Update the kernel? The intel graphic drivers?&lt;/p&gt;&#xA;" OwnerUserId="489" LastActivityDate="2016-03-03T18:42:53.650" Title="Elementary OS is unstable when using with a 6th Gen CPU" Tags="|graphic-drivers|kernel|intel|crash|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4525" PostTypeId="1" CreationDate="2016-02-27T16:39:55.113" Score="1" ViewCount="129" Body="&lt;p&gt;An annoying problem to say the least.  I have a laptop (Dell Precision M4500) and roughly 50% of the time, I boot to a black screen.  Otherwise, I boot to a normal login just fine.  Running Freya 0.3.2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect it's a race condition in startup scripts, causing Nouveau to fail when it attempts to bind to the VGA controller before it's ready.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop has an onboard Quadro FX 880M&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lspci -nnk | grep -A2 VGA&#xA;01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT216GLM [Quadro FX 880M] [10de:0a3c] (rev a2)&#xA;        Subsystem: Dell Device [1028:040c]&#xA;        Kernel driver in use: nouveau&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I was curious though, because the HDD, and Wifi lights would blink as if the laptop was running, but none of the Ctrl+Alt+F2 shortcuts would work still... So one day out of desperation, I closed the laptop long enough for the computer to automatically go to sleep.  &lt;strong&gt;Upon reopening the laptop, the driver initialized itself properly.&lt;/strong&gt;  I'm able to use this to work around the issue consistently, so I think it's a configuration issue somewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure where to really go from here, and that's why I'm posting on SA to look for the next steps in debugging this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this log is relevant.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ grep nouveau /var/log/Xorg.0.log&#xA;[     5.302] (==) Matched nouveau as autoconfigured driver 1&#xA;[     5.302] (==) Matched nouveau as autoconfigured driver 3&#xA;[     5.303] (II) LoadModule: &quot;nouveau&quot;&#xA;[     5.303] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so&#xA;[     5.304] (II) Module nouveau: vendor=&quot;X.Org Foundation&quot;&#xA;[     5.305] (==) Matched nouveau as autoconfigured driver 1&#xA;[     5.305] (==) Matched nouveau as autoconfigured driver 3&#xA;[     5.305] (II) LoadModule: &quot;nouveau&quot;&#xA;[     5.305] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so&#xA;[     5.305] (II) Module nouveau: vendor=&quot;X.Org Foundation&quot;&#xA;[     5.305] (II) UnloadModule: &quot;nouveau&quot;&#xA;[     5.305] (II) Unloading nouveau&#xA;[     5.305] (II) Failed to load module &quot;nouveau&quot; (already loaded, 0)&#xA;[     5.307] (II) [drm] nouveau interface version: 1.1.2&#xA;[     5.651] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau&#xA;[     5.651] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau&#xA;[     5.703] (II) AIGLX: Loaded and initialized nouveau&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Link to the full log: &lt;a href=&quot;https://gist.github.com/karlapsite/fadab04dccf1a7090a6c&quot; rel=&quot;nofollow&quot;&gt;https://gist.github.com/karlapsite/fadab04dccf1a7090a6c&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3474" LastEditorUserId="3474" LastEditDate="2016-02-29T04:50:51.847" LastActivityDate="2016-02-29T04:50:51.847" Title="Occasional Black Screen on Boot" Tags="|release-freya|boot|graphic-drivers|display|nvidia|" AnswerCount="0" CommentCount="0" ClosedDate="2019-02-20T16:07:18.623" ContentLicense="CC BY-SA 3.0" />
  <row Id="4526" PostTypeId="2" ParentId="4413" CreationDate="2016-02-27T19:58:27.910" Score="4" Body="&lt;p&gt;The colors are hard-coded at the moment in /libcore/gof-preferences.vala in the source tree so cannot be changed through the user interface or by changing a setting or config file.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-02-27T19:58:27.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4527" PostTypeId="2" ParentId="3964" CreationDate="2016-02-27T20:10:50.063" Score="1" Body="&lt;p&gt;It may be trying to restore tabs for locations that are invalid for some reason.  Try resetting the restored tabs to default by using dconf-editor - the key is org.pantheon.files.preferences tab-info-list.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-02-27T20:10:50.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4532" PostTypeId="2" ParentId="4177" CreationDate="2016-02-28T12:30:50.953" Score="2" Body="&lt;p&gt;You can use a udev rule to disable a bluetooth controller.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;gksudo gedit /etc/udev/rules.d/81-bluetooth-hci.rules&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And paste the following in as one line&#xA;&lt;pre&gt;&lt;code&gt;SUBSYSTEM==&quot;usb&quot;, ATTRS{idVendor}==&quot;8087&quot;, ATTRS{idProduct}==&quot;07dc&quot;, ATTR{authorized}=&quot;0&quot;&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save, exit program&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a reboot the internal Intel bluetooth chip will not function&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2016-02-28T12:30:50.953" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4536" PostTypeId="1" CreationDate="2016-02-28T15:16:23.317" Score="3" ViewCount="662" Body="&lt;p&gt;This might be rather stupid, but I did not easily find an answer to this. When putting an empty CD into the drive, a new device with the location &lt;code&gt;burn:///&lt;/code&gt; is shown. However, there is no clue how to use it. I tried copying files into the empty directory, but this does not work. Is this supposed to work? What is the suggested method on Elementary OS to burn CDs?&lt;/p&gt;&#xA;" OwnerUserId="4298" LastEditorUserId="3757" LastEditDate="2016-03-06T22:43:27.413" LastActivityDate="2016-03-06T22:43:27.413" Title="How to use the burn:/// location?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4537" PostTypeId="2" ParentId="2730" CreationDate="2016-02-28T16:41:01.017" Score="4" Body="&lt;p&gt;Start the system, and open a terminal by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -r $HOME/.Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; to return to the login screen. This should solve the issue.&lt;/p&gt;&#xA;" OwnerDisplayName="user4300" LastEditorUserId="26" LastEditDate="2020-07-03T04:27:04.147" LastActivityDate="2020-07-03T04:27:04.147" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="4538" PostTypeId="2" ParentId="4495" CreationDate="2016-02-28T20:05:52.800" Score="1" Body="&lt;p&gt;It might have to do with the graphics drivers. I recently bought a new Dell Inspiron 15 (5559) and had some issues which, however, could be solved by installing the newest kernel which includes newer graphics drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your machine is fairly new (or if you're planning to buy a new Dell machine) and has an Intel Skylake CPU, upgrading the kernel to version 4.3. or newer might help. For instructions to update to kernel 4.4 see here: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-02-28T20:05:52.800" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4539" PostTypeId="2" ParentId="4483" CreationDate="2016-02-28T20:09:10.317" Score="2" Body="&lt;p&gt;You can disable hot corners in the desktop menu of the system settings. To turn off at least some of the effects, you can use elementary tweaks, which will give you an additional panel in the system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you can disable animations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PqQKx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PqQKx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/d1U98.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d1U98.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For instructions on how to install elementary tweaks see here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2469/how-to-install-elementary-tweaks-on-freya&quot;&gt;How to install elementary tweaks on Freya&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-03-29T22:48:06.563" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4540" PostTypeId="2" ParentId="4462" CreationDate="2016-02-28T23:32:31.697" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/68306/how-do-i-remove-the-proprietary-ati-drivers&quot;&gt;https://askubuntu.com/questions/68306/how-do-i-remove-the-proprietary-ati-drivers&lt;/a&gt; &#xA;Will this also work on elementary OS?  I am afraid to try it, since last time I did stuff myself I must have made mistakes, so this time I am not touching it until I get confirmation. &#xA;So I can access the internet now and did upgrades, but the issue still remains. If there is a way to fix the AMD drivers, I would be okay with that too, obviously.  Again, I am using 64bit freya and didn't change anything but installed the AMD proprietary drivers via additional sources/gui.&lt;br&gt;&#xA;I am the same dude btw, made a new account last time since I didn't think. &lt;/p&gt;&#xA;" OwnerUserId="4305" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-05T14:45:35.440" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4542" PostTypeId="2" ParentId="4500" CreationDate="2016-02-29T01:28:34.047" Score="0" Body="&lt;p&gt;Greeter doesnt like it when you first boot. If you lock your screent though it will unlock. just not first boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like a resolution to this as well.&#xA;Would be nice to see fprint built-in and fingerprint registration on the user setup plugin.&lt;/p&gt;&#xA;" OwnerUserId="4307" LastActivityDate="2016-02-29T01:28:34.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4543" PostTypeId="2" ParentId="4500" CreationDate="2016-02-29T06:06:09.277" Score="2" Body="&lt;p&gt;This is a known bug: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1437540&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-greeter/+bug/1437540&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that it will be fixed in Loki, as you cn see the state of the bug: A patch has being requested to merge...&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-02-29T06:06:09.277" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4545" PostTypeId="1" AcceptedAnswerId="4591" CreationDate="2016-02-29T10:02:40.977" Score="2" ViewCount="3071" Body="&lt;p&gt;I followed &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=1449168&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide to encrypt my home folder and now I cannot access my external hard drive. As this guide instructs, I created a temporary user with encrypted home and migrated all my files to that user. I also made sure that the new user belongs to the same groups as my old user. After some time I deleted the old user. Everything else aside from this mounting problem seems to be working fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshot of the problem:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fHx0i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fHx0i.png&quot; alt=&quot;This Folder Does Not Belong to You. You don&amp;#39;t have permission to view this folder.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2016-03-05T10:47:37.170" Title="This Folder Does Not Belong to You" Tags="|release-freya|pantheon-files|mount|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4546" PostTypeId="2" ParentId="4536" CreationDate="2016-02-29T10:07:42.767" Score="1" Body="&lt;p&gt;I don't know about the &lt;code&gt;burn:///&lt;/code&gt; location but based on experience, I can recommend the &lt;a href=&quot;http://www.k3b.org/&quot; rel=&quot;nofollow&quot;&gt;K3b&lt;/a&gt; burner. It's available in the Software Center.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastEditorUserId="3757" LastEditDate="2016-03-06T15:06:35.127" LastActivityDate="2016-03-06T15:06:35.127" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4547" PostTypeId="1" CreationDate="2016-02-29T10:25:35.467" Score="-1" ViewCount="157" Body="&lt;p&gt;When Application menu is opened, it's not possible to switch input language, so you should close it, switch, and open again. &#xA;Screenshot shortcut is not working in this mode too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use secondary language with cyrillic letters, guess I could miss some settings for it, inasmuch as Android Studio hotkeys work only with primary english keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XBLEg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XBLEg.png&quot; alt=&quot;Apps menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4257" LastActivityDate="2016-04-29T11:45:51.227" Title="Can't change keyboard layout in opened Application menu" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4548" PostTypeId="2" ParentId="4547" CreationDate="2016-02-29T10:34:20.233" Score="1" Body="&lt;p&gt;This might be related to how X (the display server of most Linux distros, including elementary) works. What also do not work when the application menu is opened, for example, are global multimedia hotkeys.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2016-02-29T10:34:20.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4549" PostTypeId="1" AcceptedAnswerId="11750" CreationDate="2016-02-29T13:49:28.643" Score="0" ViewCount="545" Body="&lt;p&gt;I have a computer with the following specs - &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Intel Pentium E2180&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;945GCM S2L board &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;2 hdd's namely&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Seagate Momentus SpinPoint with windows 7 on sda1 , an extended partition sda4 containing 346GB data , 186 GB EXT4(Elementary) , 155 GB (Ubuntu 15.10) and sda8(linux-swap)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Seagate Barracuda ATA IV with Windows XP Home &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I wanted linux on my PC after windows failed . I liked ubuntu and elementary and decided to install both . Ubuntu installed like a charm and works well . Elementary , I did the same thing . I selected SDA as bootloader device and the 186GB empty ext4 partition as / . The install continued for a while , and I was not at my PC . When I came back , the system was in this weird state , with a mouse pointer and cursor in the top left blinking . I mananged to switch to tty1 and reboot to ubuntu . I saw in this partition that all directories had been created , so I shut down and looked at GRUB . There was no elementary entry only Ubuntu 15.10 and my windows installs . Now what do I do ?  I have a live copy of Elementary Freya 0.3.2. &lt;/p&gt;&#xA;" OwnerUserId="4314" LastActivityDate="2017-05-30T22:12:36.107" Title="No entry in GRUB to boot!" Tags="|system-installation|boot|dual-boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4555" PostTypeId="1" CreationDate="2016-03-01T06:39:50.907" Score="2" ViewCount="359" Body="&lt;p&gt;i wanna use awesome bump but i saw that needs a 4 version of opengl, my PC have 4.3 version of opengl, but in elementary i have 3.3 version, why?&#xA;:(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some info:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL version string: 3.0 Mesa 10.5.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;server glx version string: 1.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;client glx version string: 1.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GLX version: 1.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.5.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL core profile shading language version string: 3.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL version string: 3.0 Mesa 10.5.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL shading language version string: 1.30&lt;/p&gt;&#xA;" OwnerUserId="4306" LastActivityDate="2016-03-01T06:39:50.907" Title="Wrong OpenGL version" Tags="|intel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4556" PostTypeId="1" AcceptedAnswerId="4607" CreationDate="2016-03-01T09:37:30.473" Score="4" ViewCount="418" Body="&lt;p&gt;Somehow, I accidentally made one of my pantheon terminal sessions appear on every virtual workspace, and wanted to repeat this with another window - how do I do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right clicking the title bar of pantheon terminal only offers &quot;close&quot; as an option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I am running multi-monitor setup if it's relevant)&lt;/p&gt;&#xA;" OwnerUserId="280" LastEditorUserId="3757" LastEditDate="2016-05-07T03:58:10.277" LastActivityDate="2016-05-07T03:58:10.277" Title="Make pantheon terminal window appear on all workspaces" Tags="|release-freya|pantheon-terminal|workspace|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4557" PostTypeId="2" ParentId="3093" CreationDate="2016-03-01T10:58:07.413" Score="-1" Body="&lt;p&gt;Remove lines 161 to 176 in the file. Then build it from source&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THIS IS UNTESTED AND WILL DESTROY YOUR SYSTEM MOST LIKELY AND WILL REQUIRE REINSTALLING OF THE GREETER&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-24T05:50:49.880" LastActivityDate="2016-04-24T05:50:49.880" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4558" PostTypeId="1" AcceptedAnswerId="4563" CreationDate="2016-03-01T16:26:05.177" Score="1" ViewCount="175" Body="&lt;p&gt;This is the information I get when I try &lt;code&gt;sudo apt-get update&lt;/code&gt; or when I try to use the Package Manager. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Error!&#xA;W: GPG error: http://us.archive.ubuntu.com trusty Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key &amp;lt;ftpmaster@ubuntu.com&amp;gt;&#xA;E: Encountered a section with no Package: header&#xA;E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_trusty_main_i18n_Translation-en&#xA;E: The package lists or status file could not be parsed or opened.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried following one of the answers I found here by doing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:versable/elementary-update&#xA;sudo apt-get clean&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it did not help me. Any help is appreciated!&lt;/p&gt;&#xA;" OwnerUserId="3939" LastEditorUserId="3757" LastEditDate="2016-03-06T09:48:43.940" LastActivityDate="2016-03-06T09:48:43.940" Title="Reading package lists... Error! - Freya" Tags="|release-freya|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4559" PostTypeId="1" AcceptedAnswerId="4822" CreationDate="2016-03-01T17:23:29.753" Score="3" ViewCount="286" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WzkJ5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WzkJ5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Unity 3d Linux version, but the icon associated with the &lt;code&gt;.unitypackage&lt;/code&gt; is not showing correctly. It always shows the wine icon. I have totally removed Wine, but the icon is still showing. I really appreciate any help. &lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="4502" LastEditDate="2016-03-25T13:28:34.243" LastActivityDate="2016-03-25T13:28:34.243" Title="Wrong file icon" Tags="|wine|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4561" PostTypeId="1" AcceptedAnswerId="10229" CreationDate="2016-03-01T19:13:59.860" Score="1" ViewCount="418" Body="&lt;p&gt;I'm trying to configure Maya to sync with a calendar on the Fruux.com service via the CalDAV protcol.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried launching the app via the terminal to look for error messages but do not see any.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried deleting and re-adding the calendar to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was successfully able add both fruux  CalDAV accounts to Maya, however the events do not sync, and when I try to create a new event in Maya, the event will not save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still no error output in the terminal during all of this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a screenshot of the configuration with PII (personally identifying information) blanked out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LZFC3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LZFC3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any troubleshooting suggestions?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2017-01-16T23:28:06.467" LastActivityDate="2017-12-06T21:12:36.013" Title="Maya does not sync with Fruux CalDav calendar" Tags="|calendar|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4563" PostTypeId="2" ParentId="4558" CreationDate="2016-03-01T22:08:48.213" Score="0" Body="&lt;p&gt;You got two errors trying to update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all, an error with a bad signature. All repositories in Ubuntu are signed with a GPG key, to check its authenticity. Look at the key &lt;em&gt;40976EAF437D05B5&lt;/em&gt; near the expression &lt;em&gt;BADSIG&lt;/em&gt;. You must download the correct signature from the keyserver with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 40976EAF437D05B5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To solve the problem with &lt;em&gt;MergeList&lt;/em&gt;, make a copy of your apt-lists. From terminal, try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /var/lib/apt/lists_old&#xA;sudo mv /var/lib/apt/lists/ /var/lib/apt/lists_old&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, remove the wrong lists:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/apt/lists/* -vf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and finally, recreate the &lt;em&gt;apt-lists&lt;/em&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;sudo apt-get update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-03-01T22:08:48.213" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4569" PostTypeId="1" CreationDate="2016-03-02T14:48:48.370" Score="2" ViewCount="111" Body="&lt;p&gt;&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; (e.g. &lt;kbd&gt;Windows&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;) key combination sometimes works like &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; meaning it toggles between windows of the current workspace, but sometimes it toggles between active workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is that?&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2016-03-02T14:48:48.370" Title="Differing behavior of &lt;Super&gt;+Tab" Tags="|release-freya|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="4" ClosedDate="2016-12-28T20:34:40.467" ContentLicense="CC BY-SA 3.0" />
  <row Id="4570" PostTypeId="2" ParentId="4523" CreationDate="2016-03-02T19:45:29.210" Score="0" Body="&lt;p&gt;I had this problem on a new 6th gen. machine (does this sound familiar to you?): &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4281/dell-inspiron-15-5559-problem-at-shutdown-and-logout-intel-skylake&quot;&gt;Dell Inspiron 15 5559 Problem at shutdown and logout (Intel Skylake)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it looks like it was a problem with the Intel graphics drivers. An update to kernel 4.4 solved it (almost). Here's how to upgrade: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2016/01/how-to-install-linux-kernel-4-4-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-03-02T19:45:29.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4573" PostTypeId="2" ParentId="797" CreationDate="2016-03-03T09:11:00.760" Score="5" Body="&lt;p&gt;&lt;code&gt;XLIB_SKIP_ARGB_VISUALS=1 emacs&lt;/code&gt; works properly on my system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add the following line in your .bash_aliases file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias emacs='XLIB_SKIP_ARGB_VISUALS=1 emacs'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and launch it by typing just emacs on your command line&lt;/p&gt;&#xA;" OwnerUserId="4336" LastActivityDate="2016-03-03T09:11:00.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4574" PostTypeId="1" AcceptedAnswerId="4576" CreationDate="2016-03-03T12:40:46.643" Score="2" ViewCount="1999" Body="&lt;p&gt;With the new Spotify update, the icon tray is gone does anyone know how to put it back? I know that elementary OS doesn't have a system tray icon, but I'm used to have the spotify icon on the top right corner.&lt;/p&gt;&#xA;" OwnerUserId="80" LastEditorUserId="37" LastEditDate="2016-03-03T14:16:07.170" LastActivityDate="2016-03-15T18:31:44.690" Title="Spotify icon tray" Tags="|wingpanel|spotify|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4576" PostTypeId="2" ParentId="4574" CreationDate="2016-03-03T13:44:38.997" Score="7" Body="&lt;p&gt;It seems the new update has removed the old icon tray, more info &lt;a href=&quot;https://community.spotify.com/t5/Help-Desktop-Linux-Windows-Web/Linux-Spotify-client-1-x-now-in-stable/td-p/1300404&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I was used to use the icon tray to pause/play forward and rewind musics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Based on one of the comments on the forum I was wable to create actions to the spotify icon on the dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First do open the spotify.desktop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/applications/spotify.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then at this at the end of the file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Actions=PlayOrPause;Next;Previous&#xA;&#xA;[Desktop Action PlayOrPause]&#xA;Name=Play or Pause&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.PlayPause&#xA;[Desktop Action Next]&#xA;Name=Next&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Next&#xA;[Desktop Action Previous]&#xA;Name=Previous&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Previous&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Bonus:&lt;/strong&gt;&#xA;If you want you can add some icons to your actions:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=media-playback-start&#xA;Icon=media-skip-forward&#xA;Icon=media-skip-backward&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So it will be something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Actions=PlayOrPause;Next;Previous&#xA;&#xA;[Desktop Action PlayOrPause]&#xA;Icon=media-playback-start&#xA;Name=Play or Pause&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.PlayPause&#xA;[Desktop Action Next]&#xA;Icon=media-skip-forward&#xA;Name=Next&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Next&#xA;[Desktop Action Previous]&#xA;Icon=media-skip-backward&#xA;Name=Previous&#xA;Exec=dbus-send --print-reply --dest=org.mpris.MediaPlayer2.spotify /org/mpris/MediaPlayer2 org.mpris.MediaPlayer2.Player.Previous&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/otZqu.png&quot; alt=&quot;result of actions&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="80" LastEditorUserId="80" LastEditDate="2016-03-15T18:31:44.690" LastActivityDate="2016-03-15T18:31:44.690" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4578" PostTypeId="1" AcceptedAnswerId="4582" CreationDate="2016-03-03T16:37:47.497" Score="6" ViewCount="3167" Body="&lt;p&gt;I inadvertently updated my Linux kernel to version 4.2.0-30 from 3.19.0-33 and it has broken my WiFi and USB drivers, is there a way for me to downgrade my kernel using some sort of cached version?&lt;/p&gt;&#xA;" OwnerUserId="4344" LastEditorUserId="37" LastEditDate="2016-03-05T08:53:07.217" LastActivityDate="2016-03-05T08:53:07.217" Title="How to downgrade to a older kernel" Tags="|updates|wifi|kernel|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4579" PostTypeId="1" CreationDate="2016-03-03T16:48:41.170" Score="0" ViewCount="384" Body="&lt;p&gt;I successfully installed Netbeans with JDK package in elementary OS and it works without any issues. I am now trying to install pycharm but getting error as JDK is not installed. Do I need to install JDK again?&lt;/p&gt;&#xA;" OwnerUserId="4345" LastEditorUserId="3757" LastEditDate="2016-04-04T14:08:52.287" LastActivityDate="2016-07-03T15:09:31.143" Title="elementary OS - JDK not found" Tags="|jdk|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4580" PostTypeId="2" ParentId="4523" CreationDate="2016-03-03T18:42:53.650" Score="2" Body="&lt;p&gt;Running the command &lt;code&gt;sudo apt-get install linux-generic-lts-wily&lt;/code&gt; will upgrade your Kernel to 4.2, which solved many of my issues with Skylake.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-03-03T18:42:53.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4582" PostTypeId="2" ParentId="4578" CreationDate="2016-03-04T07:21:25.503" Score="3" Body="&lt;p&gt;Run &lt;code&gt;sudo apt-get purge linux-image-4.2.0-30-generic&lt;/code&gt; in terminal to remove the new 4.2 kernel.Then reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WARNING : If you have removed your old kernel using &lt;code&gt;apt-get&lt;/code&gt; or synaptic this can result in an unbootable computer&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-04T07:21:25.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4583" PostTypeId="2" ParentId="3124" CreationDate="2016-03-04T09:28:47.087" Score="-1" Body="&lt;p&gt;I found another work around by binding 'Previous Keyboard Layout' to Alt+Space. It works fine.&lt;/p&gt;&#xA;" OwnerUserId="4350" LastEditorUserId="3757" LastEditDate="2016-03-05T05:05:22.973" LastActivityDate="2016-03-05T05:05:22.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4584" PostTypeId="2" ParentId="4578" CreationDate="2016-03-04T14:01:23.277" Score="1" Body="&lt;p&gt;You really do not need to do this right now&#xA;when booting ... &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;get to the grub menu when booting&lt;/li&gt;&#xA;&lt;li&gt;select the previous kernel&lt;/li&gt;&#xA;&lt;li&gt;run it&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;at this point see if the WiFi and USB work&#xA;If so THEN you can remove the kernel if it bothers you&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-03-04T14:01:23.277" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4587" PostTypeId="2" ParentId="4579" CreationDate="2016-03-04T22:32:46.857" Score="1" Body="&lt;p&gt;One possibility that I can think of is that you have OpenJDK installed, and PyCharm requires OracleJDK. I had a similar issue with Android Studio (also JetBrains product, so they might require the same things..). The solution, for me, was to install Oracle JDK. I used this no-fuss installer from WebUpd8: &lt;a href=&quot;https://launchpad.net/~webupd8team/+archive/ubuntu/java&quot; rel=&quot;nofollow&quot;&gt;Oracle Java (JDK) 7 / 8 / 9 Installer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-04T22:32:46.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4589" PostTypeId="2" ParentId="4511" CreationDate="2016-03-05T05:53:48.487" Score="1" Body="&lt;p&gt;Open a terminal (CTRL + ALT + T) and type &lt;code&gt;sudo apt-get purge linux-image-3.19.0-49-generic&lt;/code&gt; and press enter.This will remove the new kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WARNING : If you have removed the old kernel your VM may stop booting&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-05T05:53:48.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4590" PostTypeId="2" ParentId="4515" CreationDate="2016-03-05T06:42:02.430" Score="1" Body="&lt;p&gt;Open a terminal (CTRL + ALT + T) and type &lt;code&gt;sudo apt-get purge linux-image-3.19.0-49-generic&lt;/code&gt; and press enter.This will remove the new kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WARNING : If you have removed the old kernel your VM may stop booting&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-05T06:42:02.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4591" PostTypeId="2" ParentId="4545" CreationDate="2016-03-05T10:40:23.653" Score="2" Body="&lt;p&gt;Open Pantheon files as an administrator. Then change the owner of the &lt;code&gt;/media/magnus&lt;/code&gt; folder to the correct user. Now your user should have full access to mounted media.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-03-05T10:47:37.170" LastActivityDate="2016-03-05T10:47:37.170" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4592" PostTypeId="1" AcceptedAnswerId="5184" CreationDate="2016-03-05T11:11:29.473" Score="6" ViewCount="10647" Body="&lt;p&gt;elementary OS Loki is the next version (0.4) of elementary OS and brings many new features like HiDPI support.The name is subject to change but it could be Loki or Thor. But when is it released , Ubuntu 16.04 will be released on April 21th 2016 so it must be some time after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could not found much information on the internet&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it is might be subject to change but Ubuntu has a release date&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-10-02T16:09:07.963" LastActivityDate="2016-10-02T16:09:07.963" Title="When will elementary OS Loki be released?" Tags="|release-loki|ubuntu|" AnswerCount="6" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4594" PostTypeId="1" CreationDate="2016-03-05T14:56:28.177" Score="3" ViewCount="171" Body="&lt;p&gt;As shown below, it seems that the connection is ok until I type ls. When that happens the system stays on 227 entering active mode for a few minutes and then I get code 425. Here it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    williepabon@WP-Pavilion:~$ ftp -4 192.168.0.4 1085&#xA;Connected to 192.168.0.4.&#xA;220 ESFtpServer 0.1 ready.&#xA;Name (192.168.0.4:williepabon): &#xA;331 User name okay, need password.&#xA;Password:&#xA;230 User logged in, proceed.&#xA;Remote system type is UNIX.&#xA;Using binary mode to transfer files.&#xA;ftp&amp;gt; pwd&#xA;257 &quot;/&quot; is current directory.&#xA;ftp&amp;gt; ls&#xA;227 Entering Active Mode.&#xA;425 Cannot open data connection.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried using gnome-terminal and the same thing happens. Any ideas?&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastEditorUserId="75" LastEditDate="2016-03-11T09:22:42.677" LastActivityDate="2020-06-25T06:08:00.970" Title="Remote ftp server: Cannot open data connection" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4596" PostTypeId="2" ParentId="4594" CreationDate="2016-03-05T21:18:26.713" Score="3" Body="&lt;p&gt;You must use passive mode&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ftp -p4 192.168.0.4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However,  you can also open port 1085 in your firewall.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-03-09T20:23:42.363" LastActivityDate="2016-03-09T20:23:42.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4601" PostTypeId="1" AcceptedAnswerId="4602" CreationDate="2016-03-06T10:46:46.430" Score="2" ViewCount="1324" Body="&lt;p&gt;On a fresh install of elementary OS Freya 0.3.2, Midori crashes repeatedly, when I am trying to play a full screen YouTube video. It works fine in the normal mode. Also, I installed the codecs that it asked to install the first time I tried playing a YouTube video. I have not updated the system even once. Also, the player used is the HTML player.&lt;/p&gt;&#xA;" OwnerDisplayName="user922" LastEditorUserId="3757" LastEditDate="2016-05-06T09:03:57.617" LastActivityDate="2020-03-19T22:34:57.930" Title="Midori crashes when trying to play YouTube in fullscreen" Tags="|midori|video-player|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4602" PostTypeId="2" ParentId="4601" CreationDate="2016-03-06T11:54:36.653" Score="2" Body="&lt;p&gt;Midori is very about of date and old.The only solution is to install Chrome or Firefox or wait for elementary OS Loki (which should update it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1185/3757&quot;&gt;https://elementaryos.stackexchange.com/a/1185/3757&lt;/a&gt; to update Midori&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-03-06T11:54:36.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4604" PostTypeId="2" ParentId="3262" CreationDate="2016-03-06T13:26:26.403" Score="2" Body="&lt;p&gt;I installed WINE on my system using the &lt;code&gt;ubuntu-wine&lt;/code&gt; PPA (personal package archive) because the software center WINE would not install and had no problems with it on my system which is freya 0.3.2 64-bit.&lt;/p&gt;&#xA;&lt;h3&gt;To add the PPA and install WINE run the following&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-wine/ppa &#xA;sudo apt-get update&#xA;sudo apt-get install wine1.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should now have a perfectly working WINE installation. If you have any problems add a comment to this answer&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-03-06T13:26:26.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4607" PostTypeId="2" ParentId="4556" CreationDate="2016-03-06T17:44:30.243" Score="4" Body="&lt;p&gt;You can achieve this by assigning a keyboard shortcut to &quot;Toggle on all Workspaces&quot; in System Settings -&gt; Keyboard. Now when pressing that keyboard combination with your Pantheon Terminal active, the terminal window should appear on all workspaces. Press that same combination again, and the option should get disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UOHvG.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UOHvG.png&quot; alt=&quot;screenshot of keyboard settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2444" LastEditorUserId="2444" LastEditDate="2016-03-06T22:02:16.573" LastActivityDate="2016-03-06T22:02:16.573" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4609" PostTypeId="1" CreationDate="2016-03-06T22:49:01.770" Score="1" ViewCount="137" Body="&lt;p&gt;During this week i've been trying to install a Linux distro on my old computer to give it a new life. I tried with a lot of distros like: Ubuntu, Kubuntu, Lubuntu, Linux Mint. But all these run slow when I'm in the browser, task who left me with 50MB free. The one who ran faster was Lubuntu. I was guessing that was for the LXDE Desktop. So I want to know if this OS will run on this machine:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-RAM: 2048MB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Processor: AMD Turion (tm) 64 Mobile Technology ML-34 (1.8GHz)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Graphic Card: NVIDIA GeForce FX5200 Ultra (524MB)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="4378" LastActivityDate="2016-03-07T02:07:41.020" Title="Will elementary run well on this machine?" Tags="|hardware|" AnswerCount="2" CommentCount="0" ClosedDate="2016-03-07T14:05:56.943" ContentLicense="CC BY-SA 3.0" />
  <row Id="4610" PostTypeId="2" ParentId="4609" CreationDate="2016-03-06T22:56:32.717" Score="0" Body="&lt;p&gt;Try a more lightweight distro. Lubuntu is one step on the right track.&#xA;Puppy Linux, Tiny Core, etc. will run on very low spec hardware.&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2016-03-06T22:56:32.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4612" PostTypeId="2" ParentId="4609" CreationDate="2016-03-07T02:07:41.020" Score="1" Body="&lt;p&gt;A Sony VAIO VGN-NR120E which has very similar specs (except integrated GPU and Intel Pentium T2310) and runs elementary smoothly other than flickering when closing or opening a window &lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-07T02:07:41.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4613" PostTypeId="2" ParentId="3185" CreationDate="2016-03-07T02:52:54.007" Score="0" Body="&lt;p&gt;Me too had the same issue, Power Indicator didn't update once its booted. Found answer in G+. And it works fine for me. Source &lt;a href=&quot;https://plus.google.com/+FagnerPinheiroSantos/posts/SNkvwBNHCN4&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downgrade upower to get it working again. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install upower=0.9.23-2ubuntu1﻿&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After downgrade, Do this to prevent the package being automatically upgraded. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark hold upower﻿&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="144" LastActivityDate="2016-03-07T02:52:54.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4614" PostTypeId="2" ParentId="2018" CreationDate="2016-03-07T03:29:42.277" Score="1" Body="&lt;p&gt;Your hard drive might be slow.Try replacing the hard drive with a new one or an SSD.Slow disk access can make your system slow.The USB does not use the disk but the USB instead so it is faster&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-07T03:29:42.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4615" PostTypeId="1" CreationDate="2016-03-07T07:22:07.997" Score="1" ViewCount="339" Body="&lt;p&gt;&lt;strong&gt;Since first time freya was released&lt;/strong&gt; I had this screen flicker when moving, resizing windows. I hope that it will be fixed in some time so i sticked with luna. After months nothing was fixed still. I found some outdated fix on interent which didnt work, or worked for one part. Why is this not fixed for Intel chips?&lt;/p&gt;&#xA;" OwnerUserId="4379" LastEditorUserId="3757" LastEditDate="2016-03-09T19:40:08.020" LastActivityDate="2016-03-09T19:40:08.020" Title="Screen flickering since day 1 with Intel" Tags="|graphics|intel|" AnswerCount="0" CommentCount="2" ClosedDate="2016-03-11T09:23:37.210" ContentLicense="CC BY-SA 3.0" />
  <row Id="4616" PostTypeId="1" CreationDate="2016-03-07T08:53:31.143" Score="1" ViewCount="99" Body="&lt;p&gt;I encounter various problems with my computer. The first is that my native language is French and I don't know how to make this the default language, so the login screen, keyboard and the session are in English, the keyboard is in UK format. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second small thing, I get errors in updates, like what &lt;code&gt;update-manager&lt;/code&gt; was unable to download information for certain deposits and in addition, under the &quot;Update&quot; tab it provides me up update for Debian Jessie (see screenshot). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Third thing is that it does not want to launch Software Manager with an error: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;home-PB @ home: ~ $ software-center &#xA;ERROR: root: DebFileApplication import &#xA;Traceback (most recent call last): &#xA;File &quot;/usr/share/software-center/softwarecenter/db/__init__.py&quot;, line 4, in &amp;lt;module&amp;gt; &#xA;debfile from import DebFileApplication, DebFileOpenError &#xA;File &quot;/usr/share/software-center/softwarecenter/db/debfile.py&quot;, line 25, in &amp;lt;module&amp;gt; &#xA;from softwarecenter.db.application Import Application, AppDetails &#xA;File &quot;/usr/share/software-center/softwarecenter/db/application.py&quot;, line 28, in &amp;lt;module&amp;gt; &#xA;import softwarecenter.distro &#xA;File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 208, in &amp;lt;module&amp;gt; &#xA;distro_instance = get_distro () &#xA;File &quot;/ usr / share / software-center / softwarecenter / distro / __ init_ .py&quot;, line 183, in get_distro &#xA;module = import (distro_module_name, globals (), locals (), [], 1) &#xA;ImportError: No named elementary os module &#xA;Traceback (most recent call last): &#xA;File &quot;/ usr / bin / software-center&quot;, line 128, in &amp;lt;module&amp;gt; &#xA;softwarecenter.ui.gtk3.app import from SoftwareCenterAppGtk3 &#xA;File &quot;/usr/share/software-center/softwarecenter/ui/gtk3/app.py&quot;, line 54, in &amp;lt;module&amp;gt; &#xA;Import Application from softwarecenter.db.application &#xA;File &quot;/usr/share/software-center/softwarecenter/db/application.py&quot;, line 28, in &amp;lt;module&amp;gt; &#xA;import softwarecenter.distro &#xA;File &quot;/ usr / share / software-center / softwarecenter / distro / __ init_ .py&quot;, line 208, in &amp;lt;module&amp;gt; &#xA;distro_instance = get_distro () &#xA;File &quot;/ usr / share / software-center / softwarecenter / distro / __ init_ .py&quot;, line 183, in get_distro &#xA;module = _import (distro_module_name, globals (), locals (), [], -1) &#xA;ImportError: No Module named elementary os&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance for your answer. I have two other old cuckoos which perfectly rotate them. I do not know what goes with it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good late night;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PbePz.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PbePz.jpg&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link to original : &lt;a href=&quot;https://plus.google.com/u/0/109061274633620490063/posts/U3YdYfwtjrU&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://plus.google.com/u/0/109061274633620490063/posts/U3YdYfwtjrU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Translated with Google translate and a little bit of correcting&lt;/p&gt;&#xA;" OwnerUserId="4292" LastEditorUserId="5205" LastEditDate="2016-07-22T14:51:53.437" LastActivityDate="2016-09-20T17:00:47.450" Title="Freya security repositories turns to debian jessie" Tags="|security|repositories|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4617" PostTypeId="1" AcceptedAnswerId="4640" CreationDate="2016-03-07T15:00:04.820" Score="3" ViewCount="138" Body="&lt;p&gt;When moving , closing and opening a window it flickers with black lines.The computer is a SONY VAIO VGN-NR120E and has no problems in Windows 10 and has been like this from day one though it does not occur in Ubuntu 14.04 LTS.No hardware upgrades except RAM , WiFi and Disk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-09T10:59:02.887" Title="Application Windows are flickering when moving , closing and opening" Tags="|graphic-drivers|window-management|intel|vaio|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4620" PostTypeId="1" AcceptedAnswerId="4630" CreationDate="2016-03-07T18:42:56.497" Score="1" ViewCount="118" Body="&lt;p&gt;I've had some issues when installing the newest version of Elementary OS Freya (0.3.2).&#xA;The installation and partitioning work as expected, and show no errors.&#xA;Upon rebooting the system gives me a grub-like interface, saying BusyBox and &quot;initramfs&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried reinstalling many times, both with and without UEFI.&#xA;I've tried both partitioning myself, and letting the installation program do it.&#xA;I've tried running boot repair, through a live-cd.&#xA;I've tried installing several other distros, in the exact same way, and all of those work like they're supposed to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions would be greatly appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even.&lt;/p&gt;&#xA;" OwnerUserId="4386" LastActivityDate="2016-03-08T16:56:53.767" Title="Installation issues" Tags="|system-installation|boot|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4621" PostTypeId="2" ParentId="1953" CreationDate="2016-03-07T18:47:05.753" Score="0" Body="&lt;p&gt;I was having a similar problem (geary not validating an email account while thunderbird does).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following worked for me: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;the IMAP username should not be the whole email address, just the part before the @.&lt;/li&gt;&#xA;&lt;li&gt;copy the SMTP settings (e.g., port number) from the account settings in the email client that works.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4387" LastActivityDate="2016-03-07T18:47:05.753" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4622" PostTypeId="2" ParentId="4620" CreationDate="2016-03-07T18:50:27.880" Score="-1" Body="&lt;p&gt;I had the same problem a while back and I fixed it by installing Ubuntu first and then booting up the elementary os live cd and choosing 'erase Ubuntu and reinstall' during installation. Not sure if it'll help but it's worth a shot.&lt;/p&gt;&#xA;" OwnerUserId="4384" LastActivityDate="2016-03-07T18:50:27.880" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4623" PostTypeId="1" CreationDate="2016-03-08T00:32:12.897" Score="1" ViewCount="795" Body="&lt;p&gt;my Wi-fi won't work after sleep. My card is Intel Corporation Wireless 7260 (rev c3).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/var/log/syslog&lt;/code&gt; says : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Mar  8 00:31:15 Laptop kernel: [ 1396.243632] iwlwifi 0000:02:00.0: Failed to load firmware chunk!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How to make it work ? :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&lt;/p&gt;&#xA;" OwnerUserId="4389" LastEditorUserId="3757" LastEditDate="2016-03-08T08:51:58.850" LastActivityDate="2016-09-05T02:31:06.720" Title="No Wi-Fi after sleep" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4625" PostTypeId="1" CreationDate="2016-03-08T06:54:15.803" Score="0" ViewCount="158" Body="&lt;p&gt;I like the default icons in Elementary, however when I change the icon theme to Numix it also replaces the icons in applications (for instance Midori) which looks really out of place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to change that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: What I precisely meant is that icons within applications (such as back, forward, refresh, &amp;amp;c) are replaced with custom ones. I want to keep those the elementary default.&lt;/p&gt;&#xA;" OwnerUserId="1228" LastEditorUserId="1228" LastEditDate="2016-03-09T11:21:35.460" LastActivityDate="2016-06-08T19:55:00.067" Title="Disable custom icons within applications" Tags="|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4628" PostTypeId="2" ParentId="4623" CreationDate="2016-03-08T14:01:25.773" Score="2" Body="&lt;p&gt;That card has some issues with iwlwifi driver in sleep mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can turn off the power management with this command from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwconfig wlan0 power off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When you reboot your system you will lost this change,  so if you want to make it pemanently, you must modify your driver configuration with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options iwlmvm power_scheme=1&quot; | sudo tee /etc/modprobe.d/iwlmvm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I recommend using the first option before making any final changes with the second option.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-03-08T22:44:29.630" LastActivityDate="2016-03-08T22:44:29.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4629" PostTypeId="1" CreationDate="2016-03-08T16:46:09.407" Score="1" ViewCount="56" Body="&lt;p&gt;I've managed to install elementary OS fine to a SSD (machines specs below) on my computer, there is no other OS installed. After the fist boot and filling in my password at the login manager I get dropped straight to a desktop with no dock, no menubar, no icons...just a desktop picture. I cannot change to a console terminal, all I have is a mouse cursor. This has happened 3 times now on a completely cleaned SSD. I usually start with a clean GPT formatted disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to boot from the USB installer and chroot'ed into the / on the internal drive, though I cannot run updates as network settings do not persist through to the chroot environment (why not? in Arch it does?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install medium - Freya 0.3.2&#xA;UEFI install (no MBR installs for GFX card bios)&#xA;Motherboard - Gigabyte z97 chipset&#xA;GFX card - NVidia 970&#xA;Wifi TPLink N600 USB adapter (Ralink chipset driver works fine from kernel) &#xA;Sound - onboard&#xA;Shasum checks fine.&lt;/p&gt;&#xA;" OwnerUserId="4395" LastEditorUserId="3757" LastEditDate="2016-04-13T13:09:32.933" LastActivityDate="2016-04-13T13:09:32.933" Title="Installation from USB goes fine, cannot get past login after 1st boot" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4630" PostTypeId="2" ParentId="4620" CreationDate="2016-03-08T16:56:53.767" Score="0" Body="&lt;p&gt;I got same problem. Solved using following method:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) When you get boot option like try elementary and install elementry PRESS e&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) You will get an editor replace quite splash with break debug and then  PRESS F10&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) you will get some error don't panic wait untill you are able to type something&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) type exit and press enter &lt;/p&gt;&#xA;&#xA;&lt;p&gt;5) here you go you are at graphical installation&lt;/p&gt;&#xA;" OwnerUserId="4397" LastActivityDate="2016-03-08T16:56:53.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4631" PostTypeId="2" ParentId="3815" CreationDate="2016-03-08T19:20:00.233" Score="1" Body="&lt;p&gt;&lt;code&gt;.deb&lt;/code&gt; installation worked for me, and this is how I've done it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Visited the &lt;a href=&quot;http://www.lazarus-ide.org&quot; rel=&quot;nofollow&quot;&gt;Lazarus website&lt;/a&gt;, went to downloads (either &lt;a href=&quot;https://sourceforge.net/projects/lazarus/files/Lazarus%20Linux%20i386%20DEB/Lazarus%201.6/&quot; rel=&quot;nofollow&quot;&gt;32bit&lt;/a&gt; or &lt;a href=&quot;https://sourceforge.net/projects/lazarus/files/Lazarus%20Linux%20amd64%20DEB/Lazarus%201.6/&quot; rel=&quot;nofollow&quot;&gt;64bit&lt;/a&gt; Linux), and then downloaded &lt;strong&gt;all three&lt;/strong&gt; (as hinted) files that were there, and installed them via Software Center. Note that the order of my installs were:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;FPC-src package&lt;/li&gt;&#xA;&lt;li&gt;FPC package&lt;/li&gt;&#xA;&lt;li&gt;Lazarus package&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For people new to Ubuntu that don't understand why didn't we just download it directly from Software Center: Most of the packages in Software Center are outdated because 0.3 Freya is based on Ubuntu 14.04 (two years old now), and the packages in it are just as old. Packages will be refreshed when the next version of elementary OS launches, presumably based on Ubuntu 16.04.&lt;/p&gt;&#xA;" OwnerUserId="78" LastEditorUserId="3757" LastEditDate="2016-04-13T13:06:50.747" LastActivityDate="2016-04-13T13:06:50.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4632" PostTypeId="1" CreationDate="2016-03-08T20:03:12.060" Score="1" ViewCount="225" Body="&lt;p&gt;I've found that after an update, elementary OS no longer shows my intel sound card on system settings and I have no sound. I can only see the HDMI output, which is selected now as the only output. I've reinstalled and reloaded alsa without luck. Also, I've just seen that the audio icon that used to be on wingpanel it's not there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me out? Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output for the alsa script can be seen &lt;a href=&quot;http://www.alsa-project.org/db/?f=b654d97225b78653716e70f2715d8718f571a554&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2767" LastEditDate="2016-03-08T20:12:28.310" LastActivityDate="2016-03-08T20:12:28.310" Title="Sound card not recognized after update" Tags="|sound|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4635" PostTypeId="1" CreationDate="2016-03-08T21:46:57.453" Score="0" ViewCount="54" Body="&lt;p&gt;I have a Dell Inspiron 15R 5520 laptop, with&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel Core i5 3210m&lt;/li&gt;&#xA;&lt;li&gt;AMD Radeon HD 7670 graphics&lt;/li&gt;&#xA;&lt;li&gt;SSD drive&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I remember from the times I still dual booted Windows 7 that the battery life sometimes exceeded 3 hours. Under Freya, the battery lasts up to 1h 50m.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could I do to improve my elementary OS battery life?&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2016-03-08T21:46:57.453" Title="How to make elementary OS use less battery?" Tags="|release-freya|battery|laptop|" AnswerCount="0" CommentCount="3" ClosedDate="2016-03-08T22:49:39.510" ContentLicense="CC BY-SA 3.0" />
  <row Id="4636" PostTypeId="2" ParentId="4625" CreationDate="2016-03-08T22:32:16.023" Score="1" Body="&lt;p&gt;Gtk applications, like Midori, use gtk stock icons from selected theme to show actions WITHIN headerbars.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can make a variant of the Numix theme to solve your issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all,  create a new folder from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.icons/mynumix&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Copy the content of Numix theme icon folder to new one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp -a /usr/share/icons/Numix/. ~/.icons/mynumix&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Copy the gtk stock icons to &quot;mynumix&quot; folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp -a /usr/share/icons/elementary/actions/24/* ~/.icons/mynumix/24/actions/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Create icon cache for the new theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gtk-update-icon-cache ~/.icons/mynumix&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And finally, change to new theme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface icon-theme 'mynumix'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To restore to default theme, just execute from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface icon-theme 'elementary'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can combine sizes and themes changing the words '24' and 'elementary' by your favorite ones when you copy the stock icons.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-06-08T19:55:00.067" LastActivityDate="2016-06-08T19:55:00.067" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4637" PostTypeId="1" CreationDate="2016-03-09T05:18:23.793" Score="1" ViewCount="1552" Body="&lt;p&gt;I run elementary  OS on my laptop and after I did the usual update and upgrade, &lt;code&gt;sudo apt search&lt;/code&gt; stopped working. I've been looking everywhere for an answer and nobody seems to have had this problem!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I type &lt;code&gt;sudo apt search &amp;lt;package&amp;gt;&lt;/code&gt; the output is the usual &quot;sorting ...&quot; but it stops at 1% and doesn't say anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried so far: &lt;code&gt;apt-get clean&lt;/code&gt;, &lt;code&gt;apt-get update&lt;/code&gt;, &lt;code&gt;apt-get -f install&lt;/code&gt;; but none seem to be helpful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Funny thing, I am able to search for packages on the Software Center, and &lt;code&gt;apt-get install&lt;/code&gt; also works. So, I don't know what could be causing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, I need your help! I'm at your disposal and willing to try whatever you think will help me &lt;strong&gt;get apt search work again&lt;/strong&gt;!&lt;/p&gt;&#xA;" OwnerUserId="4318" LastEditorUserId="4318" LastEditDate="2016-03-17T00:47:41.493" LastActivityDate="2016-03-17T00:47:41.493" Title="apt search does not work" Tags="|apt|search|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4638" PostTypeId="1" CreationDate="2016-03-09T10:36:16.810" Score="4" ViewCount="90" Body="&lt;p&gt;I've been sorting my library in photos, and when looking through, pressing delete removes them from my library, but they remain in place on my hard drive. Is there an option I haven't found to delete them altogether easily?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;D&lt;/p&gt;&#xA;" OwnerUserId="4402" LastEditorUserId="3757" LastEditDate="2016-03-10T13:56:12.367" LastActivityDate="2016-03-10T13:56:12.367" Title="Deleting photos does not delete them from storage" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4639" PostTypeId="2" ParentId="4638" CreationDate="2016-03-09T10:38:07.373" Score="4" Body="&lt;p&gt;No problem - just seen there is a rubbish bin!&lt;/p&gt;&#xA;" OwnerUserId="4402" LastActivityDate="2016-03-09T10:38:07.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4640" PostTypeId="2" ParentId="4617" CreationDate="2016-03-09T10:59:02.887" Score="2" Body="&lt;p&gt;I used to have the same issue, random flickering then after a search I found &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt;. Try doing this commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mesa-utils&#xA;sudo mkdir /etc/X11/xorg.conf.d/&#xA;echo -e 'Section &quot;Device&quot;\n Identifier &quot;Intel Graphics&quot;\n Driver &quot;Intel&quot;\n Option &quot;AccelMethod&quot; &quot;sna&quot;\n Option &quot;TearFree&quot; &quot;true&quot;\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Credits goes to &lt;a href=&quot;https://launchpad.net/~gvs&quot; rel=&quot;nofollow&quot;&gt;Guy Van Sanden&lt;/a&gt; who saw this solution on Reddit.&lt;/p&gt;&#xA;" OwnerUserId="80" LastActivityDate="2016-03-09T10:59:02.887" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4642" PostTypeId="1" CreationDate="2016-03-09T14:11:36.997" Score="2" ViewCount="912" Body="&lt;p&gt;I just recently updated from using Luna to Freya (I basically ereased my drive and went with a fresh install from 0), and I have been getting this popping sound when I shut down my laptop (Lenovo Y410P). This had also happened to me before back when I used Luna, but I was able to fix it doing some google searching (I believe this is the solution I used &lt;a href=&quot;https://askubuntu.com/questions/160882/popping-noise-from-laptop-speakers&quot;&gt;https://askubuntu.com/questions/160882/popping-noise-from-laptop-speakers&lt;/a&gt;), but this doesn't seem to work on this new kernel.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been trying to find a solution on my own to no success; I'm a very superfluous Linux user so I would really appreciate some help here. Any information needed that can be of help I will provide as fast as possible. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="4406" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-01-30T17:20:16.107" Title="Crackling/Popping sound when shutdown (Lenovo Y410P)" Tags="|sound|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4643" PostTypeId="1" AcceptedAnswerId="8459" CreationDate="2016-03-09T17:53:31.507" Score="2" ViewCount="46" Body="&lt;p&gt;Background: I run code (Python) using SublimeText (ST). Sometimes I forget I have a script running and close the editor, which obviously kills whatever process is running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to somehow prevent a given app from closing by displaying a dialog to confirm first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The idea is to prevent me accidentally closing an app (ST specifically) with a process still running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this possible at all with Pantheon?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/182914/how-to-disable-closing-a-window&quot;&gt;This&lt;/a&gt; is a &lt;em&gt;somewhat similar&lt;/em&gt; question in AskUbuntu.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-02T23:28:47.697" Title="Show warning window when closing app?" Tags="|window-management|pantheon|window-manager|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4644" PostTypeId="1" AcceptedAnswerId="4647" CreationDate="2016-03-09T20:20:36.537" Score="2" ViewCount="198" Body="&lt;p&gt;Recently, the following indicator appeared in the top bar (see screenshot below, I'm running Freya). I can't get any option or other information by clicking on it, the menu bubble is empty. Thanks for any help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uWhHN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uWhHN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3948" LastEditorUserId="3757" LastEditDate="2016-03-10T02:48:43.943" LastActivityDate="2016-05-05T13:44:51.260" Title="What's this new indicator?" Tags="|release-freya|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-07-12T09:35:52.610" ContentLicense="CC BY-SA 3.0" />
  <row Id="4645" PostTypeId="2" ParentId="4629" CreationDate="2016-03-09T20:56:56.940" Score="1" Body="&lt;p&gt;It appears it's an issue with grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to boot to a (working) desktop you have to alter the /boot/grub/grub.cfg file and remove 'quiet' from the default boot option kernel line and replace with 'nomodeset'.&lt;/p&gt;&#xA;" OwnerUserId="4396" LastEditorUserId="4396" LastEditDate="2016-03-09T21:07:31.313" LastActivityDate="2016-03-09T21:07:31.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4647" PostTypeId="2" ParentId="4644" CreationDate="2016-03-09T21:29:29.047" Score="3" Body="&lt;p&gt;Do you have Dropbox installed? In the last weeks there were several problems with its indicator. Have a look on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4446/strange-wingpanel-icon&quot;&gt;How can I fix this strange icon in wingpanel?&lt;/a&gt; and mark this question as duplicate if this solves your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not the second answer can help you finding out what app is behind this indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the command (thanks to @&lt;a href=&quot;https://elementaryos.stackexchange.com/users/565/bitseater&quot;&gt;bitseater&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --type=method_call --print-reply --dest=com.canonical.indicator.application /com/canonical/indicator/application/service com.canonical.indicator.application.service.GetApplications | grep &quot;object path&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="107" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-05T13:44:51.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4648" PostTypeId="2" ParentId="3590" CreationDate="2016-03-10T03:05:07.673" Score="1" Body="&lt;p&gt;Press any key before the elementary logo when booting the live USB.You should see some thing with options.Then press F6 and after that ESC .Type SPACE (press space key) + &lt;code&gt;nomtrr&lt;/code&gt; and press enter.If it does not work add a photo of the boot command line in the comments&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-10T03:05:07.673" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4650" PostTypeId="5" CreationDate="2016-03-10T13:53:20.630" Score="0" Body="&lt;p&gt;Loki is the codename for elementary OS 0.4. It was released in September 2016.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="9" LastEditDate="2018-11-30T20:04:23.880" LastActivityDate="2018-11-30T20:04:23.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="4651" PostTypeId="4" CreationDate="2016-03-10T13:53:20.630" Score="0" Body="Questions specific to elementary OS 0.4, codenamed &quot;Loki&quot;." OwnerUserId="3757" LastEditorUserId="9" LastEditDate="2018-11-08T09:09:10.950" LastActivityDate="2018-11-08T09:09:10.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="4654" PostTypeId="2" ParentId="4427" CreationDate="2016-03-10T23:54:54.343" Score="0" Body="&lt;p&gt;You can try a later kernel with &lt;code&gt;sudo apt-get install linux-image-generic-lts-wily&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that this might break certain peripherals such as WiFi or sound, but booting back into the older kernel and uninstalling should fix any problems. Just make sure you can see grub before trying this. &lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-03-10T23:54:54.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4655" PostTypeId="1" AcceptedAnswerId="5446" CreationDate="2016-03-11T00:40:31.910" Score="1" ViewCount="263" Body="&lt;p&gt;I just tried to install ElementaryOS on my HP Probook. After the installer finishes, it reboots my computer, like normal. However, it does not boot upon restart. Instead, I get a black screen with white text that says &quot;No OS Found&quot; or something along those lines. GRUB does not appear to have loaded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I check the drive via the file browser using my LiveUSB stick, the OS files do appear to be installed on the hard drive, however it does not boot for some reason. I tried to install 3 times and got the same error. Please help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I fixed my issue by creating a 100MB &quot;swap space&quot; partition before my main filesystem.&lt;/p&gt;&#xA;" OwnerUserId="4418" LastEditorUserId="4418" LastEditDate="2016-05-15T12:36:53.093" LastActivityDate="2016-05-15T12:38:01.130" Title="No OS found after installation from LiveUSB" Tags="|boot|grub|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4657" PostTypeId="2" ParentId="4592" CreationDate="2016-03-11T02:13:33.210" Score="15" Body="&lt;p&gt;elementary have a saying about release dates, and they are quite serious.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;When it's ready.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;elementary releases are targeted to features and bugs being fixed, rather than some arbitrary release date.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2016-09-25T17:13:24.700" LastActivityDate="2016-09-25T17:13:24.700" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4658" PostTypeId="2" ParentId="3802" CreationDate="2016-03-11T04:13:35.207" Score="1" Body="&lt;p&gt;The specific solution that worked for me can be found here.&lt;a href=&quot;http://dedoimedo.com/computers/ubuntu-trusty-realtek.html&quot; rel=&quot;nofollow&quot;&gt;Fix for the Realtek RTL8723BE driver in Ubuntu Trusty&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem was caused by a realtek driver.  It apparently would go into a sleep mode inappropriately.  I tried to update the driver, but it didn't work.  Eventually I found a solution that required me to enter a line of code to disable the wifi sleep mode. For now the best advice I can give is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;open a terminal and type lspci.  It will give you a list of devices inside your computer, including your wifi card. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once you know that make and model # of your wifi card you can search for a fix that is specific to your hardware.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I found my solution by using key terms that included the wifi card, drops signal and Ubuntu 14.04.  Elementary Freya is built on Ubuntu 14.04 so if it works in Ubuntu it should work for you.  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You may have a different wifi card,but the methodology above should put you on the right track to finding a solution.&lt;/p&gt;&#xA;" OwnerUserId="86" LastEditorUserId="86" LastEditDate="2016-03-12T01:11:10.293" LastActivityDate="2016-03-12T01:11:10.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4659" PostTypeId="1" CreationDate="2016-03-11T04:49:57.480" Score="1" ViewCount="1357" Body="&lt;p&gt;I am facing a weird issue now. If I try to connect any USB device while in the middle of a session randomly, chances are, the USB device will not be recognized. If I reboot the whole system with the USB device still connected, it works fine after the reboot is complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Initially I thought this was something random. But now this happens all the time. It is starting to get very annoying. I have searched for this but haven't found any reports of the same kind. There have been reports of USB not getting recognized entirely but none of them apply to my scenario as the devices in question start working without a problem after a restart. Why is that? I don't know where to start debugging this. Can anyone help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running ElementaryOS Freya on a Lenovo G50 laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output of &lt;code&gt;lsusb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 004: ID 0bda:b728 Realtek Semiconductor Corp. &#xA;Bus 002 Device 003: ID 0c45:6513 Microdia &#xA;Bus 002 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. &#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller&#xA;Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 003 Device 002: ID 0101:0007  &#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="773" LastEditorUserId="773" LastEditDate="2016-03-11T04:56:22.980" LastActivityDate="2016-11-20T06:46:15.973" Title="USB devices not detected if connected on the fly" Tags="|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4661" PostTypeId="1" CreationDate="2016-03-11T07:10:05.980" Score="1" ViewCount="501" Body="&lt;p&gt;I recently installed elementary on an old computer core 2 duo 2.8 ghz 3gb ram. After a while it freezes completely, I can't access console &lt;code&gt;tty&lt;/code&gt; so I have to do a hard reset. How can I find what causes that?&lt;/p&gt;&#xA;" OwnerUserId="4420" LastEditorUserId="3757" LastEditDate="2016-05-06T08:50:53.690" LastActivityDate="2016-09-03T13:00:53.003" Title="elementary OS freezes completely" Tags="|system-installation|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4662" PostTypeId="1" AcceptedAnswerId="4667" CreationDate="2016-03-11T09:15:10.070" Score="1" ViewCount="89" Body="&lt;p&gt;I have multiple email addresses. When I use Geary or Thunderbird to access gmail then I can press &quot;A&quot; to archive the current message. However, there is no such option when I access emails from other email addresses (such as university emails).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to add an archive keystroke in Geary or in Thunderbird?&lt;/p&gt;&#xA;" OwnerUserId="4387" LastActivityDate="2016-03-11T15:12:57.477" Title="Archive keystroke in Geary or Thunderbird" Tags="|pantheon-mail|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4663" PostTypeId="2" ParentId="4637" CreationDate="2016-03-11T09:20:36.947" Score="2" Body="&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; is not really related to the traditional &lt;code&gt;apt-something&lt;/code&gt; commands, it's another application. &lt;code&gt;apt search&lt;/code&gt; means you started the application &lt;code&gt;apt&lt;/code&gt; with the parameter &lt;code&gt;search&lt;/code&gt;. As far as I know &lt;code&gt;apt&lt;/code&gt; is under active development and most likely unstable in Ubuntu 14.04. To search the cache for packages, you should use &lt;code&gt;apt-cache search&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="75" LastActivityDate="2016-03-11T09:20:36.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4664" PostTypeId="1" CreationDate="2016-03-11T11:13:34.017" Score="1" ViewCount="141" Body="&lt;p&gt;I am trying to install elementary OS Freya on my laptop and I've tried a thousand programs and bootable USBs and nothing, these are the specs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-Computer-&#xA;Processor: 2x AMD Turion (tm) 64 X2 Mobile Technology TL-58&#xA;Memory: 1789MB (1157MB used)&#xA;Operating System: Zorin 11&#xA;Date / Time: Fri 11 Mar 2016 11:57:12 CET&#xA;-Display-&#xA;Resolution: 1280x800 pixels&#xA;OpenGL Renderer: Unknown&#xA;X11 Vendor: The X.Org Foundation&#xA;-Multimedia-&#xA;Audio Adapter: HDA-Intel - HDA ATI SB&#xA;-input Devices-&#xA; Power Button&#xA; lid Switch&#xA; Sleep Button&#xA; Power Button&#xA; Translated AT September 2 keyboard&#xA; Video Bus&#xA; SynPS / 2 Synaptics TouchPad&#xA; Acer BMA150 accelerometer&#xA; Logitech USB Laser Mouse&#xA; HDA ATI SB Mic&#xA; HDA ATI SB Line&#xA; HDA ATI SB Front Headphone&#xA; Acer CrystalEye webcam&#xA;-Printers-&#xA;No printers found&#xA;-scsi Disks-&#xA;Hitachi ATA HTS54161&#xA;HL-DT-ST DVD-RAM GSA-T20N&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Since the USB booteable stays fixed on the screen with the &quot;e&quot; logo and stay here forever, if I enter in the initial menu and test Live version, only works after giving enough times Esc key, from there I try to install and all it seems to work well in the installation, but when it ends and restarts, turns staying with &quot;e&quot; logo fixed and nothing happens.&lt;/p&gt;&#xA;" OwnerUserId="4421" LastEditorUserId="26" LastEditDate="2016-03-11T22:18:06.417" LastActivityDate="2016-03-11T22:18:06.417" Title="elementary fails to boot installations media, and fails to boot install" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4665" PostTypeId="2" ParentId="1990" CreationDate="2016-03-11T14:38:14.437" Score="1" Body="&lt;p&gt;Had same problem with Opencart regarding this and using it as SMTP.  Google Apps security settings needs changing to allow access!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9Ra3k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9Ra3k.png&quot; alt=&quot;Google Apps&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4422" LastActivityDate="2016-03-11T14:38:14.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4666" PostTypeId="2" ParentId="4664" CreationDate="2016-03-11T15:03:01.233" Score="1" Body="&lt;p&gt;If you follow these steps (based on instructions from &lt;a href=&quot;https://wiki.ubuntu.com/DebuggingKernelBoot&quot; rel=&quot;nofollow&quot;&gt;the Ubuntu Wiki&lt;/a&gt;), you can see where Elementary OS is failing as it tries to start up:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot from the USB drive.&lt;/li&gt;&#xA;&lt;li&gt;Navigate to &quot;try Elementary OS,&quot; and press &quot;e&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Remove the &lt;code&gt;quiet&lt;/code&gt; and &lt;code&gt;splash&lt;/code&gt; keywords (found in the line starting with &lt;code&gt;linux&lt;/code&gt;). Also remove the parameter &lt;code&gt;vt.handoff=7&lt;/code&gt;, and on the line that reads &lt;code&gt;set gfxpayload=$linux_gfx_mode&lt;/code&gt;, replace with &lt;code&gt;set gfxpayload=text&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Press &quot;Ctrl+x&quot; to boot. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;What are the last few entries that appear when you try to boot in this mode?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What program are you using to create a bootable USB drive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You are installing Elementary OS 0.3.2, right? This version fixes several installation issues from older versions.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-11T15:03:01.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4667" PostTypeId="2" ParentId="4662" CreationDate="2016-03-11T15:12:57.477" Score="1" Body="&lt;p&gt;In Geary, this isn't currently possible, but the development team is &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1546259&quot; rel=&quot;nofollow&quot;&gt;planning to add that feature&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Thunderbird, you can set up archiving for non-Gmail accounts by &lt;a href=&quot;https://support.mozilla.org/en-US/kb/archived-messages#w_how-do-i-configure-archiving&quot; rel=&quot;nofollow&quot;&gt;following these instructions&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-11T15:12:57.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4668" PostTypeId="2" ParentId="4090" CreationDate="2016-03-11T16:33:11.540" Score="2" Body="&lt;p&gt;I had same issue. Some people says to re-configure keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&#xA;&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but i did not work for me until I reconfigure LighDm :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg-reconfigure lightdm&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it works fine for me&lt;/p&gt;&#xA;" OwnerUserId="4423" LastActivityDate="2016-03-11T16:33:11.540" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4669" PostTypeId="2" ParentId="3915" CreationDate="2016-03-11T16:36:49.963" Score="0" Body="&lt;p&gt;So, you didn't even start installing it? If so, you should create a bootable USB (using Rufus, for example), then reboot your computer, and select your USB as a boot device. From there, elementary OS will boot, and you should follow the instructions on the installer to install it.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-11T16:36:49.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4672" PostTypeId="2" ParentId="4592" CreationDate="2016-03-11T20:06:16.043" Score="3" Body="&lt;p&gt;So their motto is &quot;when it's ready&quot; but judging by the comments from the guys on the simply elementary podcast there is a pretty high chance it will be released this summer or fall. But there is always a possibility that they decide to do more extensive new development or they run into a bunch of bugs and it might not be till next spring. But most likely it will be within 7 months after the Ubuntu 16.04 release.&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2016-03-11T20:06:16.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4673" PostTypeId="2" ParentId="4027" CreationDate="2016-03-11T22:48:10.177" Score="1" Body="&lt;p&gt;I got it to work by installing nautilus and dconf:&#xA;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/enable-desktop-icons-and-right-click-in-elementaryos-freya.198/#post-232&quot; rel=&quot;nofollow&quot;&gt;https://elementaryforums.com/index.php?threads/enable-desktop-icons-and-right-click-in-elementaryos-freya.198/#post-232&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4426" LastActivityDate="2016-03-11T22:48:10.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4674" PostTypeId="1" CreationDate="2016-03-12T00:52:23.930" Score="1" ViewCount="166" Body="&lt;p&gt;Whenever I try to install steam on the Terminal, it replies:&lt;br&gt;&#xA;&lt;code&gt;E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)&#xA;E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?&#xA;&lt;/code&gt;What's happening? Is there a way to fix it?&#xA;If it matters, I have installed Elementary OS Freya.&lt;/p&gt;&#xA;" OwnerUserId="3832" LastActivityDate="2016-03-12T10:21:03.360" Title="Why can't I install Steam?" Tags="|software-installation|steam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4675" PostTypeId="2" ParentId="4674" CreationDate="2016-03-12T02:10:35.967" Score="1" Body="&lt;p&gt;First try rebooting and if that does not work try running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/dpkg/lock&#xA;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now try to install Steam (remember to use &lt;code&gt;sudo&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-12T02:10:35.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4676" PostTypeId="2" ParentId="4294" CreationDate="2016-03-12T04:15:16.460" Score="0" Body="&lt;p&gt;I had an issue with software center opening because I had elementary tweaks installed. I could change the icon pack to an Ubuntu icon set and it worked. If that is the case elementary tweaks is your problem and you have to purge it completely or change the icon pack to something that works.&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2016-03-12T04:15:16.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4677" PostTypeId="1" AcceptedAnswerId="4679" CreationDate="2016-03-12T06:01:58.500" Score="1" ViewCount="1904" Body="&lt;p&gt;The version in Software Center is ancient - is that planned to be fixed soon? Well, I tried to download the &lt;code&gt;.deb&lt;/code&gt; from LibreOffice's site but I ended up with a whole bunch of .deb files that required each other and not a single installation script like I hoped for. Assistance appreciated!&lt;/p&gt;&#xA;" OwnerUserId="4429" LastEditorUserId="3757" LastEditDate="2016-04-23T12:29:19.000" LastActivityDate="2016-04-23T12:29:19.000" Title="How to install latest LibreOffice" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ClosedDate="2016-03-12T20:54:04.307" ContentLicense="CC BY-SA 3.0" />
  <row Id="4678" PostTypeId="1" CreationDate="2016-03-12T06:12:45.523" Score="2" ViewCount="857" Body="&lt;p&gt;Plan to use the latest version of elementary OS Freya 64-bit on a ThinkPad T420 with a Kingdian 60GB SATA III SSD (hey, it was $27, don't laugh) and I have confirmed the SSD supports TRIM under Windows, but is there anything I will need to do to make it work automatically on Linux? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="4429" LastEditorUserId="3757" LastEditDate="2016-03-23T07:25:17.723" LastActivityDate="2016-03-23T07:25:17.723" Title="Does Elementary OS Freya Support SSD Trim?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4679" PostTypeId="2" ParentId="4677" CreationDate="2016-03-12T07:33:58.833" Score="1" Body="&lt;p&gt;Since elementary OS is based on Ubuntu 14.04 LTS, packages available to download (either from apt-get or Software Center) are likely outdated. That means that, to get the latest version of a program, you should add a PPA repository to your system. To do this, search for &quot;X PPA&quot; where &quot;X&quot; is the name of your application. In this case, you should search for &quot;LibreOffice PPA&quot;, and it will give you a result, usually to Launchpad, from where you can add a PPA like &lt;code&gt;ppa:libreoffice/ppa&lt;/code&gt; to your system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;LibreOffice should be installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remember to mark as answer if this works :)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="78" LastEditDate="2016-03-12T20:53:54.900" LastActivityDate="2016-03-12T20:53:54.900" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4680" PostTypeId="2" ParentId="4674" CreationDate="2016-03-12T10:21:03.360" Score="1" Body="&lt;p&gt;This happens whenever you try to work with packages in one process (i.e. application), but some other application is already working with packages (as you can see in error message &quot;&lt;code&gt;...is another process using it?&lt;/code&gt;&quot;). Maybe updates are installing while you were trying to install Steam, or Software Center was opened and something was downloading. When you encounter this, try to close all other package-managing applications, and if that doesn't help, do what Suici said.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-12T10:21:03.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4682" PostTypeId="1" CreationDate="2016-03-12T14:25:54.283" Score="1" ViewCount="125" Body="&lt;p&gt;Recently my Dell latitude E7240 has had issues with suspending. It seems to have come about after a recent update, however I am not sure which or if that is the case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop will suspend when the lid is closed but after a few minutes it will begin a restart. This is obviously a concern for me as I carry my laptop in a backpack and I don't want it to overheat.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have played with the lid settings in the dconf editor but nothing helped. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could it be a hardware problem? The laptop is still under warranty so not is the time to get it checked if it is. However if its a known bug or a software fix that is always easier than not having the laptop for a few days. Has anyone else experienced this? &lt;/p&gt;&#xA;" OwnerUserId="3465" LastActivityDate="2016-03-12T14:25:54.283" Title="Laptop restart after suspend" Tags="|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4683" PostTypeId="1" AcceptedAnswerId="4688" CreationDate="2016-03-12T15:00:19.030" Score="1" ViewCount="272" Body="&lt;p&gt;&lt;strong&gt;&lt;em&gt;Edited after flag and comment to close as duplicate:&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was marked as a duplicate for asking for a system tray icon while it looks &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4227/170&quot;&gt;elementary OS does not have a system tray&lt;/a&gt;. If that is the case, then I do not mean system tray, but the area where other programs have system tray-like icons&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Eejhh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Eejhh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to have a Deadbeef icon &lt;strong&gt;like that&lt;/strong&gt; in elementary OS - as I have in other desktops environments (and other programs have in elementary OS)?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-13T12:55:39.860" Title="Can I get a panel icon (similar to a systray icon) for Deadbeef - like Clementine and many other programs have?" Tags="|release-freya|icons|wingpanel|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4685" PostTypeId="1" AcceptedAnswerId="4686" CreationDate="2016-03-12T19:58:29.830" Score="0" ViewCount="293" Body="&lt;p&gt;Before being edited &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4227/170&quot;&gt;this answer&lt;/a&gt; was suggesting that elementary OS does not have a system tray.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to know more about this. What is the difference between this and what I see in other desktops like Xfce etc and why some apps don't show an icon here when they should, while others do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6PjIZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6PjIZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-13T13:07:36.360" Title="Is this panel area a system tray?" Tags="|release-freya|icons|wingpanel|" AnswerCount="1" CommentCount="6" ClosedDate="2016-04-13T16:13:46.467" ContentLicense="CC BY-SA 3.0" />
  <row Id="4686" PostTypeId="2" ParentId="4685" CreationDate="2016-03-12T20:57:17.773" Score="0" Body="&lt;p&gt;That &lt;em&gt;is&lt;/em&gt; a System Tray, and the answer you link to is somewhat contradictory.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary OS does not have a system tray&lt;br&gt;&#xA;  ...&lt;br&gt;&#xA;  Currently (in 0.3 Freya), only the Ayatana Indicator API is respected.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Ayatana Indicators do exist in a system tray in Freya, however they will not in Loki.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-03-12T20:57:17.773" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4687" PostTypeId="2" ParentId="4678" CreationDate="2016-03-12T20:58:19.200" Score="5" Body="&lt;p&gt;Ubuntu 14.04 LTS has TRIM support enabled by default, and since elementary OS is based on 14.04, I'd say yes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To confirm this option, you can try from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo hdparm -I /dev/sda | grep &quot;TRIM supported&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="851" LastEditorUserId="851" LastEditDate="2016-03-13T01:54:01.203" LastActivityDate="2016-03-13T01:54:01.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4688" PostTypeId="2" ParentId="4683" CreationDate="2016-03-12T20:59:47.597" Score="1" Body="&lt;p&gt;If deadbeef does not appear in the tray in Freya it is because it is not using the Ayatana Indicator API.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Freya, you can ask for Ayatana Indicator API support, however in Loki this will also not be available. The linked question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4226/how-can-i-get-applications-to-display-a-system-tray-icon&quot;&gt;How can I get applications to display a system tray icon?&lt;/a&gt; shows several alternatives for future releases.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-03-12T21:56:27.707" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4689" PostTypeId="1" AcceptedAnswerId="4708" CreationDate="2016-03-12T22:20:15.107" Score="0" ViewCount="354" Body="&lt;p&gt;By default the Music player (&lt;code&gt;noise&lt;/code&gt;) keeps playing if closed, as it has this option enabled by default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9FP0U.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9FP0U.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So closing means closing the GUI and losing access to its graphical options. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can the purpose of this be and how it is supposed to be closed in this case?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-03-14T18:00:55.330" Title="How is Music player meant to be closed?" Tags="|music|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4691" PostTypeId="2" ParentId="2602" CreationDate="2016-03-12T22:32:02.630" Score="0" Body="&lt;p&gt;The answer appears to help. The newly created windows now always open in front of the other windows. The only minor annoyance is that they do not always have focus until clicked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I would post this as a comment but I don't have enough reputation.&lt;/p&gt;&#xA;" OwnerUserId="4437" LastActivityDate="2016-03-12T22:32:02.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4693" PostTypeId="1" AcceptedAnswerId="4696" CreationDate="2016-03-12T23:15:25.093" Score="0" ViewCount="139" Body="&lt;p&gt;I have an item list and I want to put a text input:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Dave1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Dave1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ki0jx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ki0jx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;using Gtk;&#xA;&#xA;public class TreeViewSample : Window {&#xA;&#xA;    public TreeViewSample () {&#xA;        this.title = &quot;Programa de odontologia&quot;;&#xA;        set_default_size (500,500);&#xA;        var view = new TreeView ();&#xA;        setup_treeview (view);&#xA;        add (view);&#xA;        this.destroy.connect (Gtk.main_quit);&#xA;    // The Entry:&#xA;        Gtk.Entry entry = new Gtk.Entry ();&#xA;        this.add (entry);&#xA;&#xA;        // Add a default-text:&#xA;        entry.set_text (&quot;hello, world!&quot;);&#xA;&#xA;        // Add a delete-button:&#xA;        entry.set_icon_from_icon_name (Gtk.EntryIconPosition.SECONDARY, &quot;edit-clear&quot;);&#xA;        entry.icon_press.connect ((pos, event) =&amp;gt; {&#xA;            if (pos == Gtk.EntryIconPosition.SECONDARY) {&#xA;                entry.set_text (&quot;&quot;);&#xA;            }&#xA;        });&#xA;&#xA;        // Print text to stdout on enter:&#xA;        entry.activate.connect (() =&amp;gt; {&#xA;            unowned string str = entry.get_text ();&#xA;            stdout.printf (&quot;%s\n&quot;, str);&#xA;        });&#xA;}&#xA;&#xA;    private void setup_treeview (TreeView view) {&#xA;&#xA;        /*&#xA;         * Use ListStore to hold accountname, accounttype, balance and&#xA;         * color attribute. For more info on how TreeView works take a&#xA;         * look at the GTK+ API.&#xA;         */&#xA;&#xA;        var listmodel = new ListStore (5, typeof (string), typeof (string),&#xA;                                          typeof (string), typeof (string), typeof (string));&#xA;        view.set_model (listmodel);&#xA;&#xA;        view.insert_column_with_attributes (-1, &quot;Nombre del paciente&quot;, new CellRendererText (), &quot;text&quot;, 0);&#xA;        view.insert_column_with_attributes (-1, &quot;Apellido&quot;, new CellRendererText (), &quot;text&quot;, 1);&#xA;    view.insert_column_with_attributes (-1, &quot;Tratamiento&quot;, new CellRendererText (), &quot;text&quot;, 2);&#xA;&#xA;        var cell = new CellRendererText ();&#xA;        cell.set (&quot;foreground_set&quot;, true);&#xA;        view.insert_column_with_attributes (-1, &quot;Lo que debe&quot;, cell, &quot;text&quot;, 3, &quot;foreground&quot;, 4);&#xA;&#xA;&#xA;        TreeIter iter;&#xA;        listmodel.append (out iter);&#xA;        listmodel.set (iter, 0, &quot;Agustin&quot;, 1, &quot;Gomez&quot;, 3, &quot;0&quot;, 2, &quot;conducto&quot;, 4, &quot;blue&quot;);&#xA;&#xA;        listmodel.append (out iter);&#xA;        listmodel.set (iter, 0, &quot;Laura&quot;, 1, &quot;Gomez&quot;, 3, &quot;$100&quot;, 2, &quot;conducto&quot;, 4, &quot;red&quot;);&#xA;&#xA;    listmodel.append (out iter);&#xA;        listmodel.set (iter, 0, &quot;Luis&quot;, 1, &quot;Gomez&quot;, 3, &quot;$400&quot;, 2, &quot;conducto&quot;, 4, &quot;green&quot;);&#xA;    }&#xA;&#xA;    public static int main (string[] args) {&#xA;        Gtk.init (ref args);&#xA;&#xA;        var sample = new TreeViewSample ();&#xA;        sample.show_all ();&#xA;        Gtk.main ();&#xA;&#xA;        return 0;&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4438" LastEditorUserId="3757" LastEditDate="2016-03-13T02:44:43.810" LastActivityDate="2016-03-13T04:45:38.990" Title="Item list with text input error on Vala" Tags="|programming|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4695" PostTypeId="1" CreationDate="2016-03-13T01:25:25.327" Score="1" ViewCount="103" Body="&lt;p&gt;In my previous operating system (Windows 10), there were occasional issues with the WiFi needing to reconnect; but after switching to Elementary, Web pages become unresponsive and I have to keep disconnecting and reconnecting every few minutes just to be able to surf the Web. It is possible to live with, but it's certainly annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;sudo lshw -C network&lt;/code&gt; command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: eth0&#xA;       version: 06&#xA;       serial: 90:2b:34:a1:01:b4&#xA;       size: 10Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:40 ioport:d000(size=256) memory:d0904000-d0904fff memory:d0900000-d0903fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4440" LastEditorUserId="3757" LastEditDate="2016-05-06T14:29:26.873" LastActivityDate="2016-05-06T14:29:26.873" Title="WiFi Network Goes Offline Every Few Minutes" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4696" PostTypeId="2" ParentId="4693" CreationDate="2016-03-13T04:45:38.990" Score="1" Body="&lt;p&gt;Sounds like you want &lt;a href=&quot;http://valadoc.org/gtk+-3.0/Gtk.Overlay.html&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;Gtk.Overlay&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, a better design would probably be to put both the &lt;code&gt;Gtk.TreeView&lt;/code&gt; and &lt;code&gt;Gtk.Entry&lt;/code&gt; an a &lt;code&gt;Gtk.Box&lt;/code&gt; so the entry doesn't occlude the tree view…&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2016-03-13T04:45:38.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4697" PostTypeId="2" ParentId="4294" CreationDate="2016-03-13T07:36:03.810" Score="0" Body="&lt;p&gt;Try this solution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make a backup of &lt;code&gt;/usr/share/software-center/softwarecenter/distro/__init__.py&lt;/code&gt; using &lt;code&gt;cp /usr/share/software-center/softwarecenter/distro/__init__.py ~&lt;/code&gt; to backup file. Just in case :)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;sudo scratch-text-editor /usr/share/software-center/softwarecenter/distro/__init__.py&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to line 177&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change &lt;code&gt;distro_id= distro_info['ID']&quot; to &quot;distro_id='elementary OS'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Before edit: `distro_id= distro_info['ID']`&#xA;After edit: `distro_id='elementary OS'`&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in terminal: &lt;code&gt;sudo update-software-center&lt;/code&gt;    &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope it works now.&lt;/p&gt;&#xA;" OwnerUserId="4442" LastEditorUserId="3757" LastEditDate="2016-03-14T07:34:28.980" LastActivityDate="2016-03-14T07:34:28.980" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4698" PostTypeId="1" CreationDate="2016-03-13T08:06:27.700" Score="5" ViewCount="1847" Body="&lt;p&gt;Is there a way to set some transparency (it would be awesome activate this feature by shortcut-toggle)  to a specific window (for example only on &lt;code&gt;chromium-browser&lt;/code&gt;)?&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="3757" LastEditDate="2016-03-15T06:33:58.017" LastActivityDate="2016-03-16T15:57:17.360" Title="Set transparency of the window for a specific application" Tags="|themes|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4699" PostTypeId="2" ParentId="4655" CreationDate="2016-03-13T08:06:44.133" Score="0" Body="&lt;p&gt;This could possibly mean that there isn't an EFI partition available, I think that that could be your problem. Try to reinstall, but this time create a 50MB &quot;EFI partition&quot; (something along those lines in the dropdown menu when you choose partition purpose) before any other partitions, and then create your partitions as usual. I remember I had a hard time booting, too, before adding this partition. &lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-13T08:06:44.133" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4700" PostTypeId="2" ParentId="3511" CreationDate="2016-03-13T08:28:23.567" Score="1" Body="&lt;p&gt;Before doing any of the things I say below, a fair warning: I am a Complete newbie to Linux. So any of these mess up your system, its on you :P&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i think your situation could happen with either of the following.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt; Graphics Driver error,&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To check if this is the problem, disable graphic drivers on Booting. To do this &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;go to grub menu while booting (press and hold Shift key),&lt;/li&gt;&#xA;&lt;li&gt;select advanced options for elementary &lt;/li&gt;&#xA;&lt;li&gt;now you will See a list of kernels both generic and recovery.  the selection will be on The first one (generic) &lt;/li&gt;&#xA;&lt;li&gt;press 'e' (DON'T press 'Enter' cuz that will just execute booting in to that kernel ).&lt;/li&gt;&#xA;&lt;li&gt;Now you will be in a kernel editing screen.  in this screen go to the line that Ends with &quot;quiet splash&quot; &lt;/li&gt;&#xA;&lt;li&gt;type in &quot;nomodeset&quot; in front of it so that The line will end like &quot;nomodeset quiet splash&quot;&gt;&gt; press Ctrl + X Hopefully now you will go to the login screen&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Kernel problem,&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To check this,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;please go to grub menu while booting (press and hold Shift key),&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;select advanced options for elementary  now you will See a list of kernels both generic and recovery. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select a generic kernel other than The first one&gt;&gt; now your computer will boot into the login screen. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;conclusion:  if this works you'll have to set that kernel as your default kernel by removing rest of kernels and regenerating all hooks followed by a grub update.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# update-intramfs -u &amp;amp;&amp;amp; update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4442" LastEditorUserId="-1" LastEditDate="2018-04-23T06:41:30.283" LastActivityDate="2018-04-23T06:41:30.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4701" PostTypeId="2" ParentId="4294" CreationDate="2016-03-13T12:26:43.647" Score="1" Body="&lt;p&gt;&lt;strong&gt;Explanation&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output when you try to launch &lt;strong&gt;&lt;em&gt;software-center&lt;/em&gt;&lt;/strong&gt; indicates that there is an error when execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/software-center/softwarecenter/__init__.py&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Its code calls a variable named &quot;DISTRIB_ID&quot; from the &lt;strong&gt;&lt;em&gt;/etc/lsb_release&lt;/em&gt;&lt;/strong&gt; file to know what's your OS. You can see the content of this file from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/lsb-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This content is what it should be, but for some reason (i will comment later), don't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;A workaround to solve the issue&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let's change the file /etc/lsb-release temporarily:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/lsb-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go to first line and change &lt;code&gt;DISTRIB_ID=&quot;elementary OS&quot;&lt;/code&gt; with &lt;code&gt;DISTRIB_ID=&quot;Ubuntu&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you must reinstall your software-center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall software-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When finish, you can replace &quot;DISTRIB_ID&quot; to the old value.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to run now software-center. If error appears again, you must set &lt;code&gt;DISTRIB_ID=&quot;Ubuntu&quot;&lt;/code&gt; permanently. This can make other parts of elementary OS, using &lt;em&gt;lsb_release&lt;/em&gt;, stop working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reasons for failure&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some changes in your system make unusedful your software center. I have read, not long ago, that &lt;a href=&quot;https://lwn.net/Articles/658809/&quot; rel=&quot;nofollow&quot;&gt;Debian has introduced some changes in lsb_release package&lt;/a&gt;. I can see a debian repository in your &lt;em&gt;source.list&lt;/em&gt; which could cause this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, both elementary OS and Ubuntu are planning to replace software-center with others applications. You can see more info at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/appcenter&quot; rel=&quot;nofollow&quot;&gt;AppCenter - elementary OS Loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Apps/Software&quot; rel=&quot;nofollow&quot;&gt;Gnome Software - Ubuntu 16.04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-03-13T12:26:43.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4704" PostTypeId="1" CreationDate="2016-03-13T18:13:35.413" Score="1" ViewCount="567" Body="&lt;p&gt;During boot I get the message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/mapper/elementary--vg-swap_1 is not ready yet or not present - message on boot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which has been deleted after a while. After a login I can't see any swap space related entry in mtab. How can I solve this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system doesn't boot with UEFI, the content of the file fstab is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;&#xA; #&#xA;&#xA; # Use 'blkid' to print the universally unique identifier for a&#xA;&#xA; # device; this may be used with UUID= as a more robust way to name devices&#xA;&#xA; # that works even if disks are added and removed. See fstab(5).&#xA;&#xA; #&#xA;&#xA; # &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA; /dev/mapper/elementary--vg-root /               ext4    errors=remount-ro 0       1&#xA;&#xA; # /boot was on /dev/sda1 during installation&#xA;&#xA;UUID=82b8b0b7-107b-4c99-89a5-1b0801c65e0b /boot           ext2    defaults        0       2&#xA;&#xA;/dev/mapper/elementary--vg-swap_1 none            swap    sw              0       0&#xA;&#xA;/dev/mapper/cryptswap1 none swap sw 0 0&#xA;&#xA;/dev/sdb2 /opt ext4 rw,nosuid,nodev,auto,user,exec,uhelper=udisks2 0 0&#xA;&#xA;The results of the commands lsblk, pvs, vgs and lvs are&#xA;&#xA;$ lsblk&#xA;&#xA;NAME                             MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT&#xA;&#xA;sda                                8:0    0 298.1G  0 disk &#xA;&#xA;├─sda1                             8:1    0   243M  0 part /boot&#xA;&#xA;├─sda2                             8:2    0     1K  0 part &#xA;&#xA;└─sda5                             8:5    0 297.9G  0 part &#xA;&#xA;  ├─elementary--vg-root (dm-0)   252:0    0   282G  0 lvm  /&#xA;&#xA;  └─elementary--vg-swap_1 (dm-1) 252:1    0  15.8G  0 lvm  &#xA;&#xA;sdb                                8:16   0   2.7T  0 disk &#xA;&#xA;├─sdb1                             8:17   0     1M  0 part &#xA;&#xA;├─sdb2                             8:18   0   2.7T  0 part /opt&#xA;&#xA;└─sdb3                             8:19   0  15.8G  0 part &#xA;&#xA;sdc                                8:32   0  37.3G  0 disk &#xA;&#xA;├─sdc1                             8:33   0  21.5G  0 part &#xA;&#xA;├─sdc2                             8:34   0     1K  0 part &#xA;&#xA;└─sdc5                             8:37   0  15.8G  0 part &#xA;&#xA;sr0                               11:0    1     2K  0 rom  &#xA;&#xA;$ sudo pvs&#xA;&#xA;[sudo] password for ralf: &#xA;&#xA;  PV         VG            Fmt  Attr PSize   PFree &#xA;&#xA;  /dev/sda5  elementary-vg lvm2 a--  297.85g 16.00m&#xA;&#xA;$ sudo vgs&#xA;&#xA;  VG            #PV #LV #SN Attr   VSize   VFree &#xA;&#xA;  elementary-vg   1   2   0 wz--n- 297.85g 16.00m&#xA;&#xA;$ sudo lvs&#xA;&#xA;  LV     VG            Attr      LSize   Pool Origin Data%  Move Log Copy%  Convert&#xA;&#xA;  root   elementary-vg -wi-ao--- &#xA;282.03g                                           &#xA;&#xA;  swap_1 elementary-vg -wi-a----  15.80g                                           &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4451" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:23.537" LastActivityDate="2018-05-15T12:30:23.537" Title="No swap space on elementary-os Freya" Tags="|release-freya|system-installation|boot|swap|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4705" PostTypeId="2" ParentId="4695" CreationDate="2016-03-13T18:46:00.897" Score="1" Body="&lt;p&gt;Install third party Realtek wifi drivers. Follow this link check out right side text.&#xA; &lt;a href=&quot;https://sites.google.com/site/easylinuxtipsproject/reserve-7#TOC-The-rtlwifi_new-driver-from-lwfinger&quot; rel=&quot;nofollow&quot;&gt;https://sites.google.com/site/easylinuxtipsproject/reserve-7#TOC-The-rtlwifi_new-driver-from-lwfinger&lt;/a&gt;&lt;br&gt;&#xA;And next time you buy computer make sure it's not shipped with Realtek wifi chipset at least I won't be buying one.&lt;/p&gt;&#xA;" OwnerUserId="4166" LastActivityDate="2016-03-13T18:46:00.897" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4706" PostTypeId="2" ParentId="4704" CreationDate="2016-03-13T20:47:05.483" Score="1" Body="&lt;p&gt;Are you using the UUID in &lt;code&gt;/etc/crypttab&lt;/code&gt; in the line of cryptswad1? I think it is a known bug, you can replace the UUID by the device:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cryptswap1 /dev/sdaX /dev/urandom swap,cipher=aes-cbc-essiv:sha256&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/a/472421&quot;&gt;https://askubuntu.com/a/472421&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4439" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-13T20:47:05.483" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4707" PostTypeId="2" ParentId="4689" CreationDate="2016-03-13T21:39:39.927" Score="3" Body="&lt;p&gt;Well... You can flip that setting off. Or when it's on, you just stop it from the music/sound indicator on the top bar. That should work in theory and that's what I do but maybe someone else has a better idea.&lt;/p&gt;&#xA;" OwnerUserId="1180" LastActivityDate="2016-03-13T21:39:39.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4708" PostTypeId="2" ParentId="4689" CreationDate="2016-03-14T03:38:22.187" Score="8" Body="&lt;p&gt;By default, Music doesn't stop playing just because the window is closed. Very seldom will one actually want or need the window while Music is playing. In this way, Music is a bit of a service. There is an app that allows you fine grained control or you can control playback from the indicator or very passively from media keys, but the window is not required to be open taking up space and cluttering your workflow for you to have music playing or control its playback.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to stop playback, you can use the &quot;pause&quot; button. &lt;strong&gt;Closing the app while no music is playing will quit the app.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorDisplayName="user170" LastEditDate="2016-03-14T18:00:55.330" LastActivityDate="2016-03-14T18:00:55.330" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4710" PostTypeId="2" ParentId="1103" CreationDate="2016-03-14T09:17:54.780" Score="0" Body="&lt;p&gt;What version of the LibreOffice are you using? This looks like the old version, from the Software Center. To get the newest version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-14T09:17:54.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4713" PostTypeId="2" ParentId="311" CreationDate="2016-03-14T13:33:51.943" Score="1" Body="&lt;p&gt;&lt;strong&gt;NOTE: These directions are unofficial, outdated, and not supported by elementary&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, download Ubuntu 16.04 from &lt;a href=&quot;http://cdimage.ubuntu.com/daily-live/current/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://cdimage.ubuntu.com/daily-live/current/&lt;/a&gt; and install it. Then in Ubuntu 16.04 terminal run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily &#xA;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get dist-upgrade&#xA;sudo apt-get install elementary-theme elementary-icon-theme elementary-default-settings elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you should be able to select the new desktop environment in the Unity greeter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/49k2xp/how_to_preview_loki_ubuntu_1606_dailyospatches_ppa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/49k2xp/how_to_preview_loki_ubuntu_1606_dailyospatches_ppa/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe someone can make an ISO from this.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="308" LastEditDate="2019-12-06T06:58:56.827" LastActivityDate="2019-12-06T06:58:56.827" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="4714" PostTypeId="1" CreationDate="2016-03-14T13:43:55.307" Score="1" ViewCount="471" Body="&lt;p&gt;I'm having this problem when I try to set-up my bluetooth headset (an Avantree audition Pro, which is very nice btw), and it pairs properly, but when I go to sound settings, it doesn't show in list of output devices. The only thing I tried so far is make &lt;code&gt;AutoConnect=true&lt;/code&gt; in &lt;code&gt;/etc/audio/bluetooth.conf&lt;/code&gt;, but it doesn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any other ideas? Thank you very much.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.D.: I'm using an old Lenovo Thinkpad edge 13&quot; 0196-A13.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tony@ToNy:~$ pactl list short | grep bluetooth&#xA;7   module-bluetooth-policy &lt;/p&gt;&#xA;" OwnerUserId="4459" LastEditorUserId="4459" LastEditDate="2016-03-25T21:49:44.200" LastActivityDate="2019-12-15T22:00:33.000" Title="Bluetooth headset set-up problem" Tags="|sound|bluetooth|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4715" PostTypeId="2" ParentId="4592" CreationDate="2016-03-14T13:54:23.637" Score="5" Body="&lt;p&gt;According to: &lt;a href=&quot;http://www.networkworld.com/article/3039009/open-source-tools/elementary-boss-watches-the-linux-distro-make-great-strides.html&quot;&gt;http://www.networkworld.com/article/3039009/open-source-tools/elementary-boss-watches-the-linux-distro-make-great-strides.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Do you have a time frame that you're looking at for&#xA;  releasing the next version of elementary OS? Or are you going with the&#xA;  &quot;we release when it's ready&quot; approach?&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Haha, always 'when it's ready' but definitely this year :)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4460" LastActivityDate="2016-03-14T13:54:23.637" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4716" PostTypeId="2" ParentId="4256" CreationDate="2016-03-14T20:09:26.080" Score="3" Body="&lt;p&gt;At present, the only way to choose is to right-click on the script - the context menu will give on option to &quot;Run&quot; or &quot;Open with ...&quot;.  The latter should give a list of applications including a text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could not find a bug raised regarding this at the moment but it seems a reasonable request, so I suggest you raise a bug at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-03-14T20:09:26.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4717" PostTypeId="1" CreationDate="2016-03-14T20:34:15.717" Score="2" ViewCount="201" Body="&lt;p&gt;I recently tried to dual boot Elementary OS with Windows 7. I can see WiFi networks but when I try and connect to them, it asks for the password then tries to connect. After a while it stops and asks me the password again. I'm using a TP-LINK TL-WN881ND Wireless Adapter. Whenever I try to connect to the internet via Ethernet it also doesn't work. It tries to connect me to the network and then disconnects. This is the output from sudo lshw -C network. Thanks for all your help in advance&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary@elementary:~$ sudo lshw -C network&#xA; *-network               &#xA;   description: Wireless interface&#xA;   product: AR9287 Wireless Network Adapter (PCI-Express)&#xA;   vendor: Qualcomm Atheros&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   logical name: wlan0&#xA;   version: 01&#xA;   serial: e8:94:f6:fb:2b:ff&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=ath9k driverversion=3.19.0-39-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:32 memory:fe800000-fe80ffff&#xA; *-network&#xA;   description: Ethernet interface&#xA;   product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;   vendor: Realtek Semiconductor Co., Ltd.&#xA;   physical id: 0&#xA;   bus info: pci@0000:04:00.0&#xA;   logical name: eth0&#xA;   version: 06&#xA;   serial: 74:d4:35:99:77:fd&#xA;   size: 1Gbit/s&#xA;   capacity: 1Gbit/s&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;   resources: irq:29 ioport:d000(size=256) memory:fe700000-fe700fff memory:d0000000-d0003fff&#xA;elementary@elementary:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4107" LastActivityDate="2016-03-14T20:34:15.717" Title="Both WiFi and Ethernet don't work" Tags="|wifi|" AnswerCount="0" CommentCount="1" ClosedDate="2016-04-21T19:11:46.200" ContentLicense="CC BY-SA 3.0" />
  <row Id="4719" PostTypeId="1" CreationDate="2016-03-15T00:33:20.253" Score="2" ViewCount="695" Body="&lt;p&gt;With 0.3.2 Freya on a i7-3537U CPU @ 2.00GHz, and a NVIDIA Corporation GK107M [GeForce GT 740M] (rev a1) (an Asus laptop), my experience was allways having glicthes when I change windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sadly, I tried this:&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/33nbod/if_you_are_having_cursor_issues_andor_visual/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/33nbod/if_you_are_having_cursor_issues_andor_visual/&lt;/a&gt;&#xA;Which nearly broke my system (or so I thought). It got me into a login loop. And I had to boot from a USB disk and undo it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, back to the glitches. Which are anoying when I am watching movies, or comics, or just changing windows, scrolling - basically all the normal stuff you do in your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone said that with Freya 0.3.1 a wonderful new world would come and all this would be solved and also that this happened with old systems.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1864/graphics-issues-on-elementary-os-freya-atom-n550-gma3150?rq=1&quot;&gt;Graphics issues on elementary OS Freya Atom N550 (GMA3150)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is an i7 and a GeForce GT 740M old? Is suddenly a linux system supposed to work only if you have the newest hardware available?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Severall users are having this issue. The reddit users seemed to be the only ones that said (with hurrays and flowers) it worked... thank you so much. So sorry to spoil the party, it did not work for me. And I did not feel like creating a reditt account just to spoil their little party.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So sorry for my bitterness today.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary is my favorite OS. it is :D&#xA;And I will defend it with passion.&#xA;Nearly broke my PC (took me 3 days to install it - and to get over the grub loop). Now my battery ends a lot quicker than with Windows 8 or 10. My almost brand new Epson printer does not work. Every time my other machine (a PC) is working with the printer, my Elementary OS says proudly &quot;No drivers for your printer&quot; and I love him for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But these glitches are too much. &#xA;Like always: if there is a solution, I'll take it.&#xA;If there is not, I'll take it as it is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Life does not suck, with Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your time.&#xA;(With Ubuntu, that I now dislike because of their conections with Amazon and the chinese defense ministry, most of the time I just waited - impatiently - and things got solved in future updates).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please make this future update in the near future. Hope this is bugging someone who knows code, or is involved in the development of the OS. That would gets things done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[obviously, I understand that Elementary 1.0 was not released yet. And I am proud to be a supporter at this stage. What I like about the Linux community is this willingness to make amazing software that is truly ours, the user's. So, I do take responsability for it, for the decisions I make, for the effort I put in it. Even if I don't know the first thing about code. I know this is mine, and I cherish the people who made the code, in a transparent way, so that I can trust nothing funny is under the hood. Thank you for that.]&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-12T11:20:30.160" Title="Graphic glitches when changing windows" Tags="|release-freya|graphics|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4720" PostTypeId="2" ParentId="4294" CreationDate="2016-03-15T02:05:18.103" Score="0" Body="&lt;p&gt;If you open the &quot;Software &amp;amp; Updates&quot; app and go to the &quot;Other Software&quot; tab, are there four Elementary OS PPAs listed and checked off? If not, does adding them make things any better?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y07yE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y07yE.png&quot; alt=&quot;Software &amp;amp; Updates Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also try disabling third-party PPAs. (I had a problem in which I was unable to install software updates until I disabled some PPAs that were causing problems.)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-15T02:05:18.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4721" PostTypeId="2" ParentId="4719" CreationDate="2016-03-15T04:42:44.137" Score="1" Body="&lt;p&gt;I'm think you can fix it, It seems that the solution is in the #5 comment also I had the same problem the first time that I installed elementary OS freya and it worked for me.&#xA; &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861&quot; rel=&quot;nofollow&quot;&gt;Screen flickering&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3728" LastEditorUserId="3757" LastEditDate="2016-04-13T12:57:22.133" LastActivityDate="2016-04-13T12:57:22.133" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4722" PostTypeId="1" CreationDate="2016-03-15T06:56:28.943" Score="1" ViewCount="1423" Body="&lt;p&gt;I tried creating a &lt;a href=&quot;https://specifications.freedesktop.org/desktop-entry-spec/latest/&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;.desktop&lt;/code&gt;&lt;/a&gt; file in &lt;code&gt;/usr/share/applications&lt;/code&gt;, but it doesn't work.&#xA;I need shortcut for URL-address with own icon in Dock-panel like in Windows OS.&lt;/p&gt;&#xA;" OwnerUserId="4468" LastEditorUserId="26" LastEditDate="2016-10-02T14:14:10.863" LastActivityDate="2016-10-02T14:14:10.863" Title="How can i make a URL-shortcut?" Tags="|app-shortcuts|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4723" PostTypeId="2" ParentId="4722" CreationDate="2016-03-15T10:16:06.197" Score="3" Body="&lt;p&gt;This will probably do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=WebsiteName&#xA;GenericName=websitename&#xA;Exec=xdg-open http://www.yourwebsite.com&#xA;Terminal=false&#xA;Icon=&#xA;Type=Application&#xA;Categories=Application;Network;X-Developer;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;xdg-open will open the default browser with the argument &lt;a href=&quot;http://www.yourwebsite.com&quot; rel=&quot;nofollow&quot;&gt;http://www.yourwebsite.com&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2016-03-15T10:16:06.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4724" PostTypeId="2" ParentId="4194" CreationDate="2016-03-15T10:36:04.900" Score="1" Body="&lt;p&gt;For posterity, I experienced this issue until I installed &lt;a href=&quot;https://askubuntu.com/questions/625405/zram-vs-regular-swap-partition&quot;&gt;zRam&lt;/a&gt;, and since then I've had basically unlimited memory capacity.&lt;/p&gt;&#xA;" OwnerUserId="3657" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-15T10:36:04.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4725" PostTypeId="1" CreationDate="2016-03-15T12:03:02.797" Score="2" ViewCount="12721" Body="&lt;p&gt;Some videos start with an improper aspect ratio. Is there a way (shortcut?) to cycle aspect ratio?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-03-27T21:58:25.293" LastActivityDate="2016-12-12T13:20:52.750" Title="Is there a way to change aspect ratio when playing videos in Videos (Audience) player?" Tags="|videos|audience|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4726" PostTypeId="2" ParentId="605" CreationDate="2016-03-15T12:14:59.687" Score="1" Body="&lt;p&gt;I have multiple partitions that I wanted mounted automatically: I have set that with the 'Disks' tool (&lt;code&gt;gnome-disk-utility&lt;/code&gt;) present in the default repos.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the drive you want and access its mount options after clicking the small gears button&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Un-check the 'automatic mount', enable 'mount at startup' and set the mount point:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MR87D.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MR87D.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The mount point changes also when one of the options under 'Identify as' menu is changed. I have found most convenient the 'Identify as' option that has the form 'LABEL=Label-of-your-drive'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Labels can be easily edited&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;with Gparted - details on &lt;a href=&quot;https://askubuntu.com/a/153183/47206&quot;&gt;askubuntu&lt;/a&gt; - also [on youtube] (&lt;a href=&quot;https://youtu.be/Cf9Wb_13ew8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/Cf9Wb_13ew8&lt;/a&gt;) &lt;/li&gt;&#xA;&lt;li&gt;with Disks - details &lt;a href=&quot;https://askubuntu.com/a/276928/47206&quot;&gt;on askubuntu&lt;/a&gt; &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-15T13:07:26.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4728" PostTypeId="1" CreationDate="2016-03-15T14:02:07.620" Score="0" ViewCount="45" Body="&lt;p&gt;What are the 404 errors when I run update in terminal and how do I get rid of them? i.e.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: Failed to fetch &lt;a href=&quot;http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/source/Sources&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/trusty/main/source/Sources&lt;/a&gt;  404  Not Found&lt;/p&gt;&#xA;" OwnerUserId="4469" LastActivityDate="2016-04-14T16:33:31.187" Title="What are the 404 errors when I run update in terminal and how do I get rid of them?" Tags="|release-freya|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4729" PostTypeId="1" AcceptedAnswerId="4730" CreationDate="2016-03-15T14:23:26.793" Score="0" ViewCount="3484" Body="&lt;p&gt;I need to test from time to time the beta (static portable) builds of a program -- the stable version of which is also installed (from deb) - namely &lt;a href=&quot;https://sourceforge.net/projects/deadbeef/files/&quot; rel=&quot;nofollow&quot;&gt;Deadbeef&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to keep a launcher of the static beta build in Plank panel, but after selecting 'keep in dock' and restarting, the version launched is the main stable one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to add to Plank a launcher for the static version of the program?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-03-15T14:38:55.923" LastActivityDate="2016-04-14T15:33:30.307" Title="Add a launcher in Plank for a different (static) version of an installed program" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4730" PostTypeId="2" ParentId="4729" CreationDate="2016-03-15T14:37:34.993" Score="1" Body="&lt;p&gt;&lt;strong&gt;Plank needs &lt;code&gt;.desktop&lt;/code&gt; files in order to launch a program.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Plank launchers are specified in &lt;code&gt;~/.config/plank/dock1/launchers/&lt;/code&gt;, for each item there is a &lt;code&gt;.dockitem&lt;/code&gt; file which contains lines like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[PlankItemsDockItemPreferences]&#xA;Launcher=file:///path/to/the/desktop-file.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, dragging&amp;amp;dropping the &lt;code&gt;usr/share/applications/vlc.desktop&lt;/code&gt; file onto Plank will create the corresponding file &lt;code&gt;~/.config/plank/dock1/launchers/vlc.dockitem&lt;/code&gt; with the lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[PlankItemsDockItemPreferences]&#xA;Launcher=file:///usr/share/applications/vlc.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, for the given case of a static build, a &lt;code&gt;.desktop&lt;/code&gt; file is needed containing the line &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exec=/path/to/the/static/executable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When a main version is already installed, like in my case with Deadbeef, a simple way is to copy the &lt;code&gt;usr/share/applications/deadbeef.desktop&lt;/code&gt; file in an accessible location, edit it in a text editor, change the &lt;code&gt;Exec=&lt;/code&gt; line as above, save, and then drop the desktop file onto Plank.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-03-15T14:45:42.833" LastActivityDate="2016-03-15T14:45:42.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4731" PostTypeId="2" ParentId="4467" CreationDate="2016-03-15T15:18:39.460" Score="1" Body="&lt;h2&gt;The Plank build that comes with elementary OS Freya has&lt;/h2&gt;&#xA;&#xA;&lt;h2&gt;certain features disabled by design.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If you have the official elementary OS build of Plank, then you will lack those features.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider this &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1934/170&quot;&gt;answer by Daniel Foré&lt;/a&gt; on the fact that the Plank build in elementary OS has certain features patched out. That is an answer on &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1933/170&quot;&gt;a question about zoom&lt;/a&gt;: as you also lack zoom, as you mentioned in a comment, I think you are using the main elementary OS build of Plank. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;So, to get the full-featured Plank, you need to install the build from &lt;a href=&quot;https://launchpad.net/~ricotz/+archive/ubuntu/docky&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rico's PPA&lt;/a&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I must have installed that already (see &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4733/170&quot;&gt;my answer&lt;/a&gt; under the linked question and Daniel's comment thereunder) since all these settings work in my case. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, &lt;strong&gt;there's nothing wrong with your Plank, it's the normal one in Freya, but you need Rico's build to get what you ask here&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just remove Plank, add that PPA, update, then install Plank again.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After that, you may change the settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;code&gt;~/.config/plank/dock1/settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(if you just have one dock, otherwise you'll have different folders dock1, dock2 etc)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or with &lt;code&gt;gedit&lt;/code&gt; or other text editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gedit ~/.config/plank/dock1/settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure that you have &lt;code&gt;false&lt;/code&gt; present like so: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Whether to prevent drag'n'drop actions and lock items on the dock.&#xA;LockItems=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and then see if drag&amp;amp;drop works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make the whole process more visible (the space needed created for the dropped item etc) maybe you should consider enabling also zoom:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Whether the dock will zoom when hovered.&#xA;ZoomEnabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With both &lt;code&gt;LockItems=false&lt;/code&gt;  and &lt;code&gt;ZoomEnabled=true&lt;/code&gt; it should look like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qKuMY.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qKuMY.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work you can also try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each Plank item has a corresponding &lt;code&gt;.dockitem&lt;/code&gt; file in &lt;code&gt;~/.config/plank/dock1/launchers&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try creating your dockitem file there and see if that works, like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gedit ~/.config/plank/dock1/launchers/name-of-your-directory.dockitem&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;replacing &lt;code&gt;name-of-you-directory&lt;/code&gt; with the exact NAME of the target folder.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Paste in there something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[PlankItemsDockItemPreferences]&#xA;Launcher=file:///path/to/your/folder/name-of-your-directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Replace &lt;code&gt;file:///path/to/your/folder/name-of-your-directory&lt;/code&gt; with the exact PATH of the target folder.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and save&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested it myself, it works for me.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Moving folder items &lt;strong&gt;after&lt;/strong&gt; they are on the dock doesn't seem possible though, as long-clicking them to select and move them would just open their contents and options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R6rex.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R6rex.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-04-13T13:03:58.903" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4732" PostTypeId="2" ParentId="4728" CreationDate="2016-03-15T15:39:56.350" Score="2" Body="&lt;p&gt;There aren't packages in Versable PPA for trusty release, in which is based elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last packages of elementary-update in this repository were builded to Luna, based in Precise release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info: &lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow&quot;&gt;Elementary Update PPA&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-03-15T15:39:56.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4733" PostTypeId="2" ParentId="1933" CreationDate="2016-03-15T15:47:36.507" Score="2" Body="&lt;p&gt;It seems you need indeed the build provided by the PPA mentioned in the main answer. After that it is simple to &lt;code&gt;make the icons magnify [...] when your mouse hovers over them&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BdKYh.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BdKYh.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.config/plank/dock1/settings &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Whether the dock will zoom when hovered. &#xA;ZoomEnabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The zoom level is set here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#The dock's icon-zoom (in percent).&#xA;ZoomPercent=150&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I see this when I check Synaptic:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sXBz1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sXBz1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-03-15T19:52:23.793" LastActivityDate="2016-03-15T19:52:23.793" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4734" PostTypeId="1" CreationDate="2016-03-15T15:54:48.553" Score="0" ViewCount="34" Body="&lt;p&gt;I have tried to download 2 times freeway 0.3.2 ISO, burned into CD and boot from it but it shows me always GNU GRUB page,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix it ? because all ways that I found in internet is to solve after finished installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you for any help,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ASUS Ultrabook Intel Core i5&lt;/p&gt;&#xA;" OwnerUserId="4472" LastEditorUserId="3757" LastEditDate="2016-04-15T13:58:33.320" LastActivityDate="2016-04-15T13:58:33.320" Title="Freya 0.3.2_20151209 does not boot from CD - it goes to Grub" Tags="|release-freya|system-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4735" PostTypeId="2" ParentId="4734" CreationDate="2016-03-15T16:16:19.130" Score="1" Body="&lt;p&gt;The ISO will boot to Grub initially. That's the intended behavior.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From there, you can choose whether to try Elementary OS or install it. If you select &quot;Try Elementary OS&quot;, are you able to boot? If not, do you get an error message?&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-15T16:16:19.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4737" PostTypeId="2" ParentId="4698" CreationDate="2016-03-15T19:00:43.777" Score="3" Body="&lt;h2&gt;Adding a transparent theme:&lt;/h2&gt;&#xA;&lt;p&gt;The first thing we need is to copy a GTK theme (i.e. elemantary default theme) and modify it to display transparent windows. This can be a tough task, editing and testing CSS combinations, until we find the right levels.&lt;/p&gt;&#xA;&lt;p&gt;A more simple way to check the operation of this trick, you can install a transparent theme designed to elementary OS, executing in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-transparent-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once it's installed, you can test its performance with the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;env GTK_THEME=transparent pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Creating a shortcut:&lt;/h2&gt;&#xA;&lt;p&gt;The easiest way to make a shortcut to launch your application with transparent theme is creating a new &lt;em&gt;.desktop&lt;/em&gt; file.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make a copy of your target application launcher. With pantheon-files, open a terminal and execute:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo cp /usr/share/applications/pantheon-files.desktop /usr/share/applications/trans-pantheonfiles.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit the new launcher:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/applications/trans-pantheonfiles.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to line no. 2 and change &lt;code&gt;Name=Files&lt;/code&gt; with something like &lt;code&gt;Name=TransFiles&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to line no. 6 and change the &lt;em&gt;Exec&lt;/em&gt; variable with:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;Exec=env GTK_THEME=transparent pantheon-files %U&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save changes.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Now you can see a new launcher in slingshot called &lt;em&gt;&amp;quot;TransFiles&amp;quot;&lt;/em&gt;. You can also add it to Plank.&lt;/p&gt;&#xA;&lt;h2&gt;The chromium problem:&lt;/h2&gt;&#xA;&lt;p&gt;Chromium browser don't follow the gtk guidelines, like others applications. To make transparent window, I suggest you to use a theme from &lt;a href=&quot;https://chrome.google.com/webstore/category/themes&quot; rel=&quot;nofollow noreferrer&quot;&gt;Chrome Web Store&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;Sources:&lt;/h2&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Eyunnxx/+archive/ubuntu/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad: yunn elementary&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/78088/can-i-apply-a-different-gtk3-theme-from-the-main-one-to-an-individual-applicatio&quot;&gt;The great answer at AskUbuntu.com by Cassidy James (member of elementary team)&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-03-16T15:57:17.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4738" PostTypeId="1" CreationDate="2016-03-15T20:41:33.087" Score="0" ViewCount="185" Body="&lt;p&gt;After installing elementary on my Macbook Air I can't produce the @ symbol with the keyboard. It's not Ctrl + Alt + q as in Ubuntu or any other combination that I could think of. Copy and paste works but I don't want to do that every time. I am also missing the tilde symbol.&lt;/p&gt;&#xA;" OwnerUserId="4475" LastEditorDisplayName="user212" LastEditDate="2016-10-07T15:22:14.280" LastActivityDate="2016-10-07T15:22:14.280" Title="Where do I find the @ symbol in Freya on a Mac?" Tags="|release-freya|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4739" PostTypeId="2" ParentId="4722" CreationDate="2016-03-15T22:16:24.017" Score="0" Body="&lt;p&gt;I tried &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Name=LinkName&#xA;Type=Link&#xA;URL=http://site.com&#xA;Icon=text-html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Browser Midori or Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It  doesn't work&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=WebsiteName&#xA;GenericName=websitename&#xA;Exec=xdg-open http://www.yourwebsite.com&#xA;Terminal=false&#xA;Icon=&#xA;Type=Application&#xA;Categories=Application;Network;X-Developer;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PPmFw.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PPmFw.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Slingshot launcher.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I didn't find in Apps menu this software.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You can put it in something like ~/My_launchers&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How can i do it? Menu by right mouse doesn't work in Applications menu.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;you need sudo - like sudo gedit /usr/share/applications/my_url.desktop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;sudo gedit - command not found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why i can't create by root app &quot;files&quot; from menu Applications empty file in  /usr/share/applications/? I made file like that, but it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="4476" LastActivityDate="2016-03-15T22:16:24.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4740" PostTypeId="1" CreationDate="2016-03-16T00:30:19.057" Score="1" ViewCount="443" Body="&lt;p&gt;All applications on plank have a second fuzzy icon, like this:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/SeEOU.png&quot; alt=&quot;fuzzy plank&quot;&gt;&#xA;How can I fix this? It happens with all applications. &lt;/p&gt;&#xA;" OwnerUserId="4478" LastActivityDate="2016-03-16T02:02:02.620" Title="Plank Has Fuzzy Secondary icons" Tags="|plank|" AnswerCount="1" CommentCount="1" ClosedDate="2016-03-16T09:46:29.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="4741" PostTypeId="2" ParentId="4740" CreationDate="2016-03-16T01:40:54.907" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;Make sure chrome is not running, and remove icon from the dock&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo pantheon-files&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Go to : &lt;code&gt;/usr/share/applications&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open Google Chrome configuration file with text editor&lt;/li&gt;&#xA;&lt;li&gt;At the bottom of: &lt;code&gt;[Desktop Entry]&lt;/code&gt; right below this line: &lt;code&gt;(X-Ayatana-Desktop-Shortcuts)&lt;/code&gt;. Add this line: &lt;code&gt;StartupWMClass=Google-chrome-stable&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Save and exit&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2902" LastEditorUserId="3757" LastEditDate="2016-03-16T02:02:02.620" LastActivityDate="2016-03-16T02:02:02.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4742" PostTypeId="2" ParentId="4522" CreationDate="2016-03-16T04:37:15.550" Score="0" Body="&lt;p&gt;While searching for a solution I saw &lt;a href=&quot;https://askubuntu.com/questions/551446/cant-find-lvm-root-dropped-back-to-initramfs&quot;&gt;this&lt;/a&gt; post on askubuntu.com.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$vgchange -ay&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Allowed me to boot into the system. I did not do any more changes to make this a permanent change while booting up,since an update to my kernel came in today (to 3.19.0-56) and everything works off the bat again!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS rocks!&lt;/p&gt;&#xA;" OwnerUserId="4280" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-16T04:37:15.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4744" PostTypeId="2" ParentId="18" CreationDate="2016-03-16T11:41:52.110" Score="7" Body="&lt;h2&gt;This is a non-Chrome specific answer.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Many questions about other applications than Google Chrome have been marked as duplicate of this one, although this is about Google Chrome, because the definitive answer contains a general non-Chrome specific solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had a problem that seemed a duplicate (and that I was about to post as a separate question) about other applications and I couldn't initially see the solution there in the middle of a large text about Google Chrome. Also, that solution was not in fact working for me (see below, case 3). So, I think that it could be useful to have a clear separate answer -- to which all those closed questions marked as duplicate (and others that will suffer the same faith) can be referred.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, there are variations of this problem &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;the second icon is fuzzy, as in this Google Chrome question&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nR336.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nR336.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;the second launcher of the same application is not just fuzzy, but is completely lacking an icon/image, like &lt;a href=&quot;https://elementaryos.stackexchange.com/q/4021/170&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PFW9v.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PFW9v.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;the second icon is not fuzzy at all, but identical to the first&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GR8SD.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GR8SD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and posting those as separate questions may also lead to them being closed as duplicate; various way of dealing with these variations will be integrated in this answer.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;So, the main source is &lt;a href=&quot;https://elementaryos.stackexchange.com/a/20/170&quot;&gt;the definitive answer&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The launchers in the Plank dock correspond to &lt;code&gt;.dockitem&lt;/code&gt; files located in &lt;code&gt;~/.config/plank/dock1/launchers/&lt;/code&gt;. Each &lt;code&gt;.dockitem&lt;/code&gt; file corresponds to a &lt;code&gt;.desktop&lt;/code&gt; file. Such files (which are themselves 'launchers', as they can be executed to start an application) are usually located in &lt;code&gt;/usr/share/applications&lt;/code&gt; or in &lt;code&gt;~/.local/share/applications&lt;/code&gt; (in this case the application can be found and launched with the Applications/Slingshot launcher), but they can be put in other places, thus avoiding them being changed back by an update (the downside of this being they cannot be seen in the panel Applications/Slingshot launcher/finder) To both find them in the Slingshot and keep them after update, &lt;code&gt;~/.local/share/applications&lt;/code&gt; is the best location.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;[Case 1  - where the second icon is identical to the first, but fuzzy]&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution in the main answer is to edit in a text editor the &lt;code&gt;.desktop&lt;/code&gt; file that launches the application. That should fix the problem no. 1 above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The idea is to add a line like &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; StartupWMClass=Name-of-application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To find the proper form of &lt;code&gt;Name-of-application&lt;/code&gt;, start your target application and then open terminal and run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xprop WM_CLASS&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The cursor becomes a cross, click the window of your target application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal you should see something of the form&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WM_CLASS(STRING) = &quot;Name-Of-Application&quot;, &quot;name-of-application&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add that name to the line and paste the line in the &lt;code&gt;.desktop&lt;/code&gt; file somewhere for each of the three sections in the file: [Desktop Entry], [NewWindow Shortcut Group] and [NewIncognito Shortcut Group] (for example, at the end of each section).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;[Case 2 - where the second icon is not identical to the first, but is just a generic icon that lacks an image]&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;like &lt;a href=&quot;https://elementaryos.stackexchange.com/q/4021/170&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OP of that question has posted this in a laconic &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4034/170&quot;&gt;answer&lt;/a&gt;: &lt;em&gt;Finally, there is a simple way to fix this: simple change the icon file from &lt;code&gt;webide.png&lt;/code&gt; to &lt;code&gt;webide.ico&lt;/code&gt;, or using this useful app to edit the menu: &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/precise/alacarte/&quot; rel=&quot;noreferrer&quot;&gt;https://apps.ubuntu.com/cat/applications/precise/alacarte/&lt;/a&gt;.&lt;/em&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot verify, but it looks very far from the solution accepted under this question to which that was flagged as duplicate. (So, I flagged that one for re-opening.)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;[Case 3 - where the second icon is completely identical to the first]&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened to me when I have created a &lt;code&gt;.desktop&lt;/code&gt; file to launch a static beta version of DeadBeeF, &lt;strong&gt;the stable (non-static) version of which was installed at system level&lt;/strong&gt;, and then dragged &amp;amp; dropped that file onto the dock. When starting the program from the dock launcher a second identical icon appeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That second icon had the same option upon right-click as the first. Checking 'Keep in dock' for the second icon/launcher and un-cheking that for the first, and then launching the application from it, there would be no second icon but the stable version would start instead of the static one. Keeping both on the dock and starting the application from both, alternatively, they will start each its own version, but only the launcher of the system-level installed version will be underlined in Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Indeed, at this point, looking in &lt;code&gt;~/.config/plank/dock1/launchers/&lt;/code&gt;, one of the &lt;code&gt;.dockitem&lt;/code&gt; files present would be referring to the &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;usr/share/applications&lt;/code&gt; launching the main stable version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way to avoid the second icon appearing  while keeping the icon/launcher of the static build was to delete the &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;usr/share/applications&lt;/code&gt; that was referring to the stable version installed at system level (also, that &lt;code&gt;.desktop&lt;/code&gt; file shouldn't be present in &lt;code&gt;~/.local/share/applications&lt;/code&gt;) and then add again to Plank the launcher for the static build.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This case was the result of the fact that a version of the same application was installed at system level. Un-installing that from system level (completely, or using a static build for that too) would have also fixed the problem.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-03-16T13:42:52.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4745" PostTypeId="1" CreationDate="2016-03-16T16:58:53.410" Score="1" ViewCount="308" Body="&lt;p&gt;After update on my laptop it's not working. Today I updated my desktop - it doesn't too. Anybody having the same problem?&lt;/p&gt;&#xA;" OwnerUserId="4488" LastEditorUserId="3757" LastEditDate="2016-03-17T13:17:28.390" LastActivityDate="2016-03-23T07:07:51.773" Title="&quot;Application&quot; button doesn't work" Tags="|applications|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-12T02:07:30.003" ContentLicense="CC BY-SA 3.0" />
  <row Id="4746" PostTypeId="2" ParentId="4745" CreationDate="2016-03-16T17:18:53.873" Score="-3" Body="&lt;p&gt;Run &lt;code&gt;pkill slingshot&lt;/code&gt; in the terminal then run &lt;code&gt;gnome-session-properties&lt;/code&gt; and add the command to startup applications&lt;/p&gt;&#xA;" OwnerUserId="4199" LastEditorUserId="3757" LastEditDate="2016-03-23T07:07:51.773" LastActivityDate="2016-03-23T07:07:51.773" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4749" PostTypeId="2" ParentId="3185" CreationDate="2016-03-16T18:46:29.910" Score="2" Body="&lt;p&gt;This is a known bug, and is being tracked and worked on:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2928" LastActivityDate="2016-03-16T18:46:29.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4750" PostTypeId="2" ParentId="1415" CreationDate="2016-03-16T18:53:10.820" Score="0" Body="&lt;p&gt;This is a known bug, and is being tracked and worked on:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2928" LastActivityDate="2016-03-16T18:53:10.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4751" PostTypeId="2" ParentId="1219" CreationDate="2016-03-16T18:56:29.883" Score="1" Body="&lt;p&gt;This is a known bug, and is being tracked and worked on:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/indicator-power/+bug/1315434&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2928" LastActivityDate="2016-03-16T18:56:29.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4753" PostTypeId="1" CreationDate="2016-03-16T21:28:51.050" Score="1" ViewCount="647" Body="&lt;p&gt;I stumbled onto &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/337jqy/matepanel_top_bar_on_freya/&quot; rel=&quot;nofollow&quot;&gt;this thread&lt;/a&gt; on Reddit, but while the question is really interesting none of the answers is of much help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anybody tried installing it in Freya?&lt;/p&gt;&#xA;" OwnerUserId="4490" LastEditorUserId="37" LastEditDate="2016-03-17T08:55:38.307" LastActivityDate="2016-09-13T12:31:07.833" Title="Can I install mate-panel following the procedure in the description?" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4754" PostTypeId="1" CreationDate="2016-03-17T03:59:48.657" Score="3" ViewCount="1109" Body="&lt;p&gt;I'm using the EVGA GeForce GTX 750 ACX FTW with the driver version 361.28. The version of the OS is Elementary OS 0.3.2 Freya 64 bit. All the updates and upgrades are installed. I plugged an HDMI cable in it and the other end to a HDMI to otpical cable converter for the sound because my surround sound speakers (Logitech Z906) set only accept optical cable. I've set the audio in System settings to HDMI and the profile to Digital Surround 5.1 (HDMI) Output. I made sure that the video files I'm watching have an audio track that has a 5.1 sound. I tried to watch them with VLC 2.1.6 and Elementary OS own Video player. I used MakeMKV to rip my Blu-Rays. But still, I only get stereo sound no matter what. &lt;a href=&quot;https://i.stack.imgur.com/j0Mz7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j0Mz7.jpg&quot; alt=&quot;System settings - Sound&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4492" LastEditorUserId="4492" LastEditDate="2016-03-17T10:29:59.057" LastActivityDate="2019-10-22T03:22:24.017" Title="No 5.1 audio output over HDMI" Tags="|system|sound|" AnswerCount="1" CommentCount="0" ClosedDate="2019-10-22T03:22:39.770" ContentLicense="CC BY-SA 3.0" />
  <row Id="4755" PostTypeId="2" ParentId="4753" CreationDate="2016-03-17T08:25:26.783" Score="1" Body="&lt;p&gt;It seems like it does not work anymore.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;This is possible in Luna but you can't do it in Freya because it depends on super-wingpanel:&#xA;http://ubuntuhandbook.org/index.php/2014/01/global-menu-elementaryos-luna/&#xA;The dev for super-wingpanel abandoned it so it won't run in Freya.&#xA;SeriouslyLaughing - On the reddit thread you've posted.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But the only way to be sure is to try it yourself. You could create a virtual machine with elementary OS to test it with, that way you don't harm your system.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2016-03-17T08:25:26.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4757" PostTypeId="1" CreationDate="2016-03-17T19:21:13.140" Score="0" ViewCount="204" Body="&lt;p&gt;My screen is dimming and then completely black afters some inactivity period - but in power settings I've got &quot;Dim screen when inactive&quot; switched off. Is there any setting I am missing ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freya 0.3.2&lt;/p&gt;&#xA;" OwnerUserId="4498" LastActivityDate="2017-01-25T10:16:00.413" Title="Screen keeps dimming no matter what I set in power options" Tags="|release-freya|display|power|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4758" PostTypeId="2" ParentId="4738" CreationDate="2016-03-17T20:29:16.937" Score="2" Body="&lt;p&gt;What country are you in? You may need to select the appropriate keyboard layout for your region and language if you haven't already.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open System Settings.&lt;/li&gt;&#xA;&lt;li&gt;Go to &quot;Keyboard.&quot;&lt;/li&gt;&#xA;&lt;li&gt;From there, go to the &quot;Layout&quot; section.&lt;/li&gt;&#xA;&lt;li&gt;Click the + icon in the bottom left.&lt;/li&gt;&#xA;&lt;li&gt;Select your desired language and layout.&lt;/li&gt;&#xA;&lt;li&gt;Click &quot;add layout&quot;.&lt;/li&gt;&#xA;&lt;li&gt;In the left column, select the layout that you added.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Does that help?&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-17T20:29:16.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4759" PostTypeId="2" ParentId="4757" CreationDate="2016-03-17T21:44:56.807" Score="1" Body="&lt;p&gt;Install dconf-editor, and open up &lt;code&gt;org/gnome/settings-daemon/plugins/power&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And there you can find various useful power-related settings that you can tweak/toggle:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HUd8z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HUd8z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-03-17T21:44:56.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4760" PostTypeId="2" ParentId="4738" CreationDate="2016-03-17T21:56:48.113" Score="0" Body="&lt;p&gt;Ryan is right. When choosing your language, for each language there is usually a keyboard layout especially for Macintosh which will reproduce your standard Mac layout. It's called (e.g.) &quot;English (Macintosh)&quot;. Choose this in the system settings and you should be fine&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-17T21:56:48.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4761" PostTypeId="1" AcceptedAnswerId="4850" CreationDate="2016-03-17T22:28:53.143" Score="0" ViewCount="1083" Body="&lt;p&gt;I have a brand new Dell Inspiron 15 (5559) laptop with an &lt;strong&gt;Intel Skylake i7-6500U CPU&lt;/strong&gt; and an &lt;strong&gt;AMD Radeon R5 M335&lt;/strong&gt; graphics card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure though if freya has correctly detected the AMD Radeon card. When I run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci -nnk | grep -i VGA -A2 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;the only output there is mentions the integrated Intel Skylake graphics:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)&#xA;    Subsystem: Dell Device [1028:06b2]&#xA;    Kernel driver in use: i915_bpo&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, in the &quot;additional drivers&quot; tab in the update preferences panel, the system tells me there is an AMD Sun XT Radeon HD 8600M graphics card running on the open source Xorg driver. There is also the option to select the propriety fglrx driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how do I know if freya has correctly detected the Radeon R5 M335 card? Does my card maybe have the same chipset as the Radeon HD 8600M that is mentioned in the additional drivers settings?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:50:51.947" Title="AMD Radeon R5 M335 GPU not detected correctly?" Tags="|release-freya|graphic-drivers|hardware|drivers|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4762" PostTypeId="1" AcceptedAnswerId="4854" CreationDate="2016-03-17T22:38:34.820" Score="2" ViewCount="629" Body="&lt;p&gt;I have a brand new Dell Inspiron 15 (5559) laptop with an &lt;strong&gt;Intel Skylake i7-6500U CPU&lt;/strong&gt; and an &lt;strong&gt;AMD Radeon R5 M335&lt;/strong&gt; graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation of freya 0.3.2 seems to have worked quickly and without problems. Overall, the system runs smoothly. But there are some errors when a desktop session is interrupted which might have to do with the drivers for the Intel graphics chipset in the current elementary kernel I'm running (3.19.0-56-generic).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One problem which I was able to (kind of)  work around by installing kernel version 4.4 is described here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4281/dell-inspiron-15-5559-problem-at-shutdown-and-logout-intel-skylake/4354#4354&quot;&gt;Dell Inspiron 15 5559 Problem at shutdown and logout (Intel Skylake)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there is another problem: When the screen goes dark after x minutes of inactivity or when I suspend the session, upon return to activity the screen remains black. In the former case, the screen will just remain black. In the latter case, freya will first show the Pantheon greeter, and after you enter your password the screen will remain black. You can still hear sounds though (e.g. of a running video), so it does not look like the entire system froze.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hints? Thanks a lot because this is rather annoying. I cannot really leave my machine alone unless I want to force quit and reboot...&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-21T14:01:17.250" Title="Problem after suspend / black screen (Intel Skylake)" Tags="|release-freya|graphic-drivers|display|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4763" PostTypeId="1" CreationDate="2016-03-17T23:05:17.223" Score="1" ViewCount="399" Body="&lt;p&gt;How to change default runlevel prior to installing NVIDIA driver? I know I have to press Ctrl+Alt+F1 on logon screen.&lt;/p&gt;&#xA;" OwnerUserId="4492" LastEditorUserId="3757" LastEditDate="2016-03-19T03:39:07.213" LastActivityDate="2016-09-17T05:39:47.403" Title="How to change default runlevel" Tags="|system|startup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4765" PostTypeId="1" AcceptedAnswerId="4766" CreationDate="2016-03-18T10:00:53.330" Score="0" ViewCount="133" Body="&lt;p&gt;I needed to add some command option for an app I'm developing. I get the options working nicely after adding the following function &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public const GLib.OptionEntry[] options = {&#xA;    // --version&#xA;    { &quot;version&quot;, 0, 0, OptionArg.NONE, ref command_line_option_version, &quot;Display version number&quot;, null },&#xA;    // --monitor&#xA;    { &quot;monitor&quot;, 0, 0, OptionArg.STRING, ref command_line_option_monitor, &quot;PATH&quot;, &quot;Path to nutty config (i.e. /home/sid/.config/nutty)&quot; },&#xA;    // --alert&#xA;    { &quot;alert&quot;, 0, 0, OptionArg.NONE, ref command_line_option_alert, &quot;Run Nutty in device alert mode&quot;, null },&#xA;    // list terminator&#xA;    { null }&#xA;};&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But then when I right click the app icon the &quot;About&quot; option does not come. and the following warning also explains the reason:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nutty.vala:287.5-296.3: warning: Nutty.options hides inherited constant `Granite.Application.options'. Use the `new' keyword if hiding was intentional&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How do I get around this - i.e. how can I add the command line options while still keeping the icon right click behavior intact ? Probably some way I can extend the Granite.Application.options ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My source code is at &lt;a href=&quot;http://bazaar.launchpad.net/~bablu-boy/nutty/trunk/files&quot; rel=&quot;nofollow&quot;&gt;the following Launchpad location&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorDisplayName="user212" LastEditDate="2016-03-20T07:31:30.920" LastActivityDate="2016-03-20T07:31:30.920" Title="GLib.OptionEntry vs. Granite.Application.options" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4766" PostTypeId="2" ParentId="4765" CreationDate="2016-03-18T10:10:37.723" Score="2" Body="&lt;p&gt;take a look at this commit for a possible solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/screenshot-tool/trunk/revision/147&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-apps/screenshot-tool/trunk/revision/147&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-03-18T10:10:37.723" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4767" PostTypeId="1" AcceptedAnswerId="4988" CreationDate="2016-03-18T12:57:51.983" Score="0" ViewCount="871" Body="&lt;p&gt;I have a problem with DKMS building bad modules (insmod reports &amp;quot;Invalid module format&amp;quot;). If i run DKMS manually to build and install the modules it works fine, but when done automatically in conjunction with the Software Updater the modules don't build correctly.&lt;/p&gt;&#xA;&lt;p&gt;I'm assuming DKMS builds with incorrect headers when the kernel is being updated? Any idea how I can investigate this further?&lt;/p&gt;&#xA;&lt;h3&gt;EDIT:&lt;/h3&gt;&#xA;&lt;p&gt;Not sure why but there seems to be multiple dkms.conf for each module:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;find / -name dkms.conf&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/etc/modprobe.d/dkms.conf&#xA;/usr/src/bcmwl-6.30.223.248+bdcom/dkms.conf&#xA;/usr/src/8812au-4.2.2/dkms.conf&#xA;/var/lib/dkms/bcmwl/6.30.223.248+bdcom/build/dkms.conf&#xA;/var/lib/dkms/8812au/4.2.2/build/dkms.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;cat /etc/modprobe.d/dkms.conf&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# modprobe information used for DKMS modules&#xA;#&#xA;# This is a stub file, should be edited when needed,&#xA;# used by default by DKMS.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;cat /usr/src/8812au-4.2.2/dkms.conf&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;PACKAGE_NAME=8812au&#xA;PACKAGE_VERSION=1.0&#xA;MAKE[0]=&amp;quot;'make'&amp;quot;&#xA;BUILT_MODULE_NAME[0]=8812au&#xA;BUILT_MODULE_LOCATION[0]=&amp;quot;./&amp;quot;&#xA;DEST_MODULE_LOCATION[0]=&amp;quot;/kernel/updates/dkms&amp;quot;&#xA;AUTOINSTALL=&amp;quot;YES&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;There's no difference between the two 8812au dkms.conf files:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;diff /usr/src/8812au-4.2.2/dkms.conf /var/lib/dkms/8812au/4.2.2/build/dkms.conf&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;{blank}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;cat /etc/issue&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Freya \n \l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;EDIT2:&lt;/p&gt;&#xA;&lt;p&gt;New kernel update, same thing happened.&lt;/p&gt;&#xA;&lt;p&gt;I recorded my interactions so you can see everything seems fine. Video is a bit slow so i suggest using the links in description to jump to the interesting bits.&lt;/p&gt;&#xA;&lt;p&gt;Before update:&#xA;&lt;a href=&quot;https://asciinema.org/a/7huqhlw0kp1iv10n4741y8rq6?t=6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://asciinema.org/a/7huqhlw0kp1iv10n4741y8rq6?t=6&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After update:&#xA;&lt;a href=&quot;https://asciinema.org/a/2h2zf8j8fbgvup7rkc531sgxx?t=5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://asciinema.org/a/2h2zf8j8fbgvup7rkc531sgxx?t=5&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;As you can see above DKMS compiles and installs the kernel module correctly, but it fails to load on the new kernel version. Simply running dkms uninstall/remove/build/install manually fixes the problem.&lt;/p&gt;&#xA;&lt;p&gt;I'm not sure why when run automatically it doesnt work. Could it be that I need to run make clean beforehand or something silly like that?&lt;/p&gt;&#xA;&lt;p&gt;Any help greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="4505" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-10-06T02:35:01.067" Title="DKMS not running correctly on system update" Tags="|updates|kernel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4768" PostTypeId="1" CreationDate="2016-03-18T13:25:04.103" Score="2" ViewCount="739" Body="&lt;p&gt;&lt;em&gt;I've posted this a while back on the subreddit, but thought I may gain additional responses if I post here;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dual-boot OpenSUSE Tumbleweed and elementary OS Freya. They both have a separate BTRFS root partition on the same drive (a SSD), and share a BTRFS home partition. SuSE runs a &lt;code&gt;4.4.3-1&lt;/code&gt; kernel. Both have the same NVIDIA driver installed. In normal use, elementary OS runs just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the game Ark installed on Steam. It runs the same binary from the shared &lt;code&gt;/home&lt;/code&gt; regardless of which distro I boot. The game loads waaaay times slower in elementary and is noticeably jerky when played. It's smooth in OpenSUSE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Load times:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary OS 13 minutes 23 seconds.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;OpenSUSE  1 minute 44 seconds&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Do I put this down purely to the kernel version, or do you all have some other ideas I can check to see what's holding up elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm considering the version of BTRFS may be older (less efficient?) on elementary OS? I see OpenSUSE has 'Skinny Extents' enabled which I don't believe are enabled on the elementary OS installation. BTRFS on both distros detects it's on a SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've done some filecopies back and forth from &lt;code&gt;/home&lt;/code&gt; to the various root partitions whilst on both distros, If anything, they show it's slightly slower with opensuse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is for a 2GB file copied from &lt;code&gt;/home&lt;/code&gt; to &lt;code&gt;/usr/bin&lt;/code&gt; and back&lt;/p&gt;&#xA;&#xA;&lt;p&gt;​&lt;strong&gt;OpenSUSE timings;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m6.538s user    0m0.008s sys     0m3.340s &amp;lt;-from /home to /usr/bin&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m23.147s user    0m0.016s sys     0m3.608s &amp;lt;- from/usr/bin to /home&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m40.092s user    0m0.020s sys     0m3.228s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    1m26.616s user    0m0.012s sys     0m3.460s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m15.199s user    0m0.012s sys     0m3.372s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m26.966s user    0m0.008s sys     0m3.688s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m20.658s user    0m0.016s sys     0m3.316s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m28.842s user    0m0.008s sys     0m3.620s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;elementary OS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m14.704s user    0m0.016s sys    0m2.416s &amp;lt;-from /home to /usr/bin&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m22.019s user    0m0.016s sys    0m8.808s &amp;lt;- from/usr/bin to /home&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m19.342s user    0m0.008s sys    0m2.864s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m26.777s user    0m0.008s sys    0m3.548s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m20.306s user    0m0.020s sys    0m2.832s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m34.527s user    0m0.016s sys    0m8.420s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;real    0m16.994s user    0m0.012s sys    0m2.636s&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;real    0m17.889s user    0m0.008s sys    0m4.124s&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;What else can I usefully check?&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="4267" LastEditorUserId="4267" LastEditDate="2016-03-19T18:03:01.207" LastActivityDate="2016-04-13T13:02:25.583" Title="Slow performance issues in elementary OS vs OpenSUSE?" Tags="|steam|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4769" PostTypeId="1" CreationDate="2016-03-18T13:36:13.150" Score="0" ViewCount="934" Body="&lt;p&gt;I was wondering if I can install elementary OS in a Razer Blade 2016. I have seen a lot of problems with the drivers with other distros, mainly with booting and the trackpad. I haven't tried to install elementary OS yet.&lt;/p&gt;&#xA;" OwnerUserId="4506" LastEditorUserId="5565" LastEditDate="2016-10-06T20:44:03.593" LastActivityDate="2016-10-06T20:44:03.593" Title="Installing on the Razer Blade laptop" Tags="|system-installation|laptop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4770" PostTypeId="1" CreationDate="2016-03-18T16:05:42.043" Score="1" ViewCount="71" Body="&lt;p&gt;First of all, great job, I love it ! &#xA;But one tiny problem for me... How can I put a Greek keyboard on it. &#xA;I've installed elementary OS Freya on my old &quot;greek&quot; computer, but I can't use the greek letters.&#xA;Please help ! &#xA;Best regards, &#xA;K.BARDET&lt;/p&gt;&#xA;" OwnerUserId="4508" LastEditorUserId="3757" LastEditDate="2016-03-23T07:20:30.213" LastActivityDate="2016-09-21T14:40:32.060" Title="I would like to use greek letters on me keyboard, can you help?" Tags="|keyboard|language|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4773" PostTypeId="1" CreationDate="2016-03-19T00:02:19.647" Score="1" ViewCount="3812" Body="&lt;p&gt;I'm still at the stage of trying to create a boot USB drive. Rufus hangs at extracting: &lt;code&gt;F:\pool\main\g\gcc-4.8\cpp-4.8_4.8.4-2ubuntu1~14.04_amd64.deb&lt;/code&gt; (4.4 MB) for some reason. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will try to get some blank DVDs tomorrow and maybe try Roxio instead to create a boot DVD instead of a USB drive, if this will work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks John&lt;/p&gt;&#xA;" OwnerUserId="4515" LastEditorUserId="3757" LastEditDate="2016-03-20T04:46:33.790" LastActivityDate="2017-11-30T11:09:20.747" Title="Rufus stops copying files from the ISO" Tags="|release-freya|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4776" PostTypeId="2" ParentId="4769" CreationDate="2016-03-19T10:40:43.333" Score="1" Body="&lt;p&gt;Linux supports i7 6th gen. processors from kernel 4.3, which does not come by default in freya. You can try to launch your system from Live USB to try, but you'll must compile a new kernel to get the best performance of your processor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you wan't able to launch the Live USB, try with &lt;em&gt;nomodeset&lt;/em&gt; parameter from boot. That Nvidia 970m needs that you install 346 drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info: &lt;a href=&quot;https://askubuntu.com/a/691245&quot;&gt;Ubuntu and derivates on i7 6th gen&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-19T18:02:26.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4777" PostTypeId="1" AcceptedAnswerId="4781" CreationDate="2016-03-19T10:43:31.023" Score="1" ViewCount="2802" Body="&lt;p&gt;I am talking about all the settings that you can tweak through the system settings app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On which file(s) are they stored ? &#xA;If they are all stored in different places, how can I find the location for a specific plug ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some testing I though that they were stored in &lt;code&gt;~/.config/dconf/user&lt;/code&gt; which is a binary file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A &lt;code&gt;diff&lt;/code&gt; between two runs of &lt;code&gt;gsettings list-recursively&lt;/code&gt; before and after a change in the settings panel will reveal the keys involved by this changes.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;980c980&#xA;&amp;lt; org.pantheon.desktop.gala.behavior hotcorner-topright 'none'&#xA;---&#xA;&amp;gt; org.pantheon.desktop.gala.behavior hotcorner-topright 'show-workspace-view'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A diff between two runs of &lt;code&gt;xxd ~/.config/dconf/user&lt;/code&gt; (a hex dump of the binary file) will not highlight anything meaningful because the files changes too much. But still, the string &lt;code&gt;&quot;show-workspace-view&quot;&lt;/code&gt; is not present in the first hex dump, and is in the second.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I replace this file with another one, the system settings panel does not reflect the options that are supposed to be the new file (and that I can see in a text dump) and will overwrite them with my old settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the question remains, where are the system settings options stored ?&lt;/p&gt;&#xA;" OwnerUserId="4517" LastEditorUserId="4517" LastEditDate="2016-03-19T19:22:21.047" LastActivityDate="2016-03-20T02:00:52.180" Title="Where are system settings stored?" Tags="|settings|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4780" PostTypeId="1" AcceptedAnswerId="4818" CreationDate="2016-03-19T19:23:56.343" Score="0" ViewCount="94" Body="&lt;p&gt;I'm using Back In Time 1.1.12 in elementary 0.3.2 (based on Ubuntu 14.04) to backup my home folder to an external hard drive. Seemed to work fine so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I've bought a new computer and installed the system from scratch. Of course I want to restore the data from the home folder backup using Back In Time. But alas, none of the ~15 snapshots on my external drive shows up in the snapshot list, which is just empty (and yes, I have refreshed the snapshot list ;) ).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-22T22:50:25.653" Title="Back In Time does not show snapshots on new machine" Tags="|release-freya|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4781" PostTypeId="2" ParentId="4777" CreationDate="2016-03-20T02:00:52.180" Score="3" Body="&lt;p&gt;You are correct that most system settings are stored in gsettings which is not plain-text. Typically a tool called dconf Editor is used to manually view and manipulate settings. You can also interact with gsettings using the Terminal command &lt;code&gt;gsettings&lt;/code&gt; as you've already discovered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not really meaningful to think of where gsettings are stored in terms of the filesystem. It's more useful to think of where gsettings are stored in terms of Schemas separated by &lt;code&gt;.&lt;/code&gt;, like DBus. Take your example above &lt;code&gt;org.pantheon.desktop.gala.behavior hotcorner-topright&lt;/code&gt;. This describes a location in a tree. See this screenshot of dconf Editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KnKOr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KnKOr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As to where settings are stored by plug, settings aren't really organized in that manner. A plug could change the settings of many different system components. However, many of the plugs will manipulate children of &lt;code&gt;org.gnome.settings-daemon.plugins&lt;/code&gt; since that contains settings related to a lot of lower-level system stuff. As an example, the Mouse &amp;amp; Touchpad plug will touch settings in both &lt;code&gt;org.gnome.desktop.peripherals&lt;/code&gt; and &lt;code&gt;org.gnome.settings-daemon.peripherals&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read more about gsettings in its &lt;a href=&quot;https://developer.gnome.org/gio/stable/GSettings.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME documentation&lt;/a&gt; or &lt;a href=&quot;http://valadoc.org/#!api=gio-2.0/GLib.Settings&quot; rel=&quot;nofollow noreferrer&quot;&gt;on Valadoc&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-03-20T02:00:52.180" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4782" PostTypeId="1" CreationDate="2016-03-20T03:15:21.057" Score="0" ViewCount="438" Body="&lt;p&gt;I'm trying to install Elementary OS, and since it's based on Ubuntu I thought this question might have place here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During the very beginning of the installation I'm having this weird bug where the resolution will start right but then will suddenly super zoom into a way were I can't really do anything. This is how it looks:&lt;a href=&quot;https://i.stack.imgur.com/ygLf7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ygLf7.jpg&quot; alt=&quot;Elementary installation&quot;&gt;&lt;/a&gt;&#xA;Now, I have no clue why this is happening, specially because it gets the right resolution at the first moment (1360x768) and then it will scale like this. Also if I switch to another tty the resolution is correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is this happening? How may I fix it?&lt;/p&gt;&#xA;" OwnerUserId="4523" LastActivityDate="2016-03-21T00:39:29.363" Title="Everything zoomed at installation" Tags="|system-installation|resolution|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4783" PostTypeId="2" ParentId="4031" CreationDate="2016-03-20T04:40:31.493" Score="1" Body="&lt;p&gt;This happens when &lt;a href=&quot;https://en.m.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface&quot; rel=&quot;nofollow noreferrer&quot;&gt;UEFI&lt;/a&gt; &lt;a href=&quot;https://en.m.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface#Compatibility&quot; rel=&quot;nofollow noreferrer&quot;&gt;CSM&lt;/a&gt; is enabled in UEFI firmware settings and causes GRUB2 to be installed to the &lt;a href=&quot;https://en.wikipedia.org/wiki/Master_boot_record&quot; rel=&quot;nofollow noreferrer&quot;&gt;MBR&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First enter UEFI firmware settings by holding down shift while clicking restart in Windows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/A0Dey.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/A0Dey.png&quot; alt=&quot;Rebooting&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the troubleshoot tile&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oUnik.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oUnik.png&quot; alt=&quot;troubleshoot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now click Advanced Options and then UEFI firmware settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iay1z.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iay1z.jpg&quot; alt=&quot;uefi&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then disable UEFI CSM (Compatibility Support Module) and install elementary OS again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it still fails try REFIND bootloader (I will add instructions)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-03-21T08:33:43.650" LastActivityDate="2016-03-21T08:33:43.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4784" PostTypeId="1" CreationDate="2016-03-20T09:01:59.457" Score="1" ViewCount="100" Body="&lt;p&gt;I just installed Freya on my Samsung Ativ 9 series, and works fine. Though everything looks really small, when I tried to go to settings, displays and change the display resolution it only appears 3200x1800 and can't be changed. Any solution to this?&lt;/p&gt;&#xA;" OwnerUserId="4524" LastActivityDate="2016-09-17T06:39:47.903" Title="Freya, Samsung Ativ 9, Display Resolution problems" Tags="|release-freya|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4785" PostTypeId="2" ParentId="4782" CreationDate="2016-03-20T11:22:04.730" Score="0" Body="&lt;p&gt;I can't tell you why this is happening but I solved this issue by choosing the option to try the distribution instead of installing. Once logged in you have the option to install the OS and resolution is OK.&lt;/p&gt;&#xA;" OwnerUserId="4525" LastActivityDate="2016-03-20T11:22:04.730" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4786" PostTypeId="1" CreationDate="2016-03-20T16:04:20.843" Score="1" ViewCount="92" Body="&lt;p&gt;After installing elementary, I tried to rotate my secondary screen, as the title implies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as I followed my instincts and navigated myself to the display settings in the system settings window and applied my changes on my secondary screen, the main screen always gets distorted. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do, I have installed the updates and looked for drivers for my AMD 290X, but that should have been covered in my regular software update, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what I can do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="4527" LastActivityDate="2016-09-17T04:39:45.257" Title="Trying to rotate the secondary screen counter clockwise but main screen crashes" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4788" PostTypeId="2" ParentId="4784" CreationDate="2016-03-21T00:35:50.237" Score="1" Body="&lt;p&gt;Since elementary OS is built from Ubuntu you might want to check their wiki out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set the resolutions you wish to use in your &lt;code&gt;xorg.conf&lt;/code&gt; File or via the &lt;code&gt;xrandr&lt;/code&gt; Command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/X/Config/Resolution#Resetting_an_out-of-range_resolution&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/X/Config/Resolution#Resetting_an_out-of-range_resolution&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Monitor&quot;&#xA;    Identifier      &quot;External DVI&quot;&#xA;    Modeline        &quot;1280x1024_60.00&quot;  108.88  1280 1360 1496 1712  1024 1025 1028 1060  -HSync +Vsync&#xA;    Option          &quot;PreferredMode&quot; &quot;1280x1024_60.00&quot;&#xA;EndSection&#xA;Section &quot;Device&quot;&#xA;    Identifier      &quot;ATI Technologies, Inc. M22 [Radeon Mobility M300]&quot;&#xA;    Driver          &quot;ati&quot;&#xA;    Option          &quot;Monitor-DVI-0&quot; &quot;External DVI&quot;&#xA;EndSection&#xA;Section &quot;Screen&quot;&#xA;    Identifier      &quot;Primary Screen&quot;&#xA;    Device          &quot;ATI Technologies, Inc. M22 [Radeon Mobility M300]&quot;&#xA;    DefaultDepth    24&#xA;    SubSection &quot;Display&quot;&#xA;        Depth           24&#xA;        Modes   &quot;1280x1024&quot; &quot;1024x768&quot; &quot;640x480&quot;&#xA;    EndSubSection&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, the Xorg configuration is the better choice since it'll most likely be faster on boot.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="3757" LastEditDate="2016-03-21T02:08:18.817" LastActivityDate="2016-03-21T02:08:18.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4789" PostTypeId="2" ParentId="4782" CreationDate="2016-03-21T00:39:29.363" Score="1" Body="&lt;p&gt;You could try to switch to a TTY with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;STRG+ALT+F2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Type: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --display :0 --output VGA1 --mode 1920x1080 --rate 60&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which then will force the resolution to 1920x1080. However, I'm not familiar with your monitor's rate or your display port, so you might want to change this a little (VGA1 - DVI1)?&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-21T00:39:29.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4790" PostTypeId="2" ParentId="4768" CreationDate="2016-03-21T00:49:50.737" Score="1" Body="&lt;p&gt;When a game starts up, it usually loads all relevant game textures etc. into the RAM of the GPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are you absolutely sure that you got that video drivers right? &#xA;I had the same issue with a Toshiba laptop. Where elementary OS was running perfectly fine, Arch was very slow. I later found out that my APU drivers were not working on the Arch's 4.3 Kernel but Ubuntu's way older kernel it worked perfectly fine.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="3757" LastEditDate="2016-04-13T13:02:25.583" LastActivityDate="2016-04-13T13:02:25.583" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4791" PostTypeId="2" ParentId="4763" CreationDate="2016-03-21T00:53:24.143" Score="1" Body="&lt;p&gt;You can install the driver's in runlevel 3.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CTRL+ALT+F2&#xA;$ sudo init 3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or if you want to stay at your runlevel but only want to clip off X:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo /etc/init.d/lightdm stop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-21T00:53:24.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4792" PostTypeId="2" ParentId="4786" CreationDate="2016-03-21T00:59:49.083" Score="1" Body="&lt;p&gt;Try it via Command Line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output HDMI1 --rotate right&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-21T00:59:49.083" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4793" PostTypeId="1" AcceptedAnswerId="4901" CreationDate="2016-03-21T01:04:05.107" Score="0" ViewCount="2521" Body="&lt;p&gt;I have tried everything, from Unetbootin, to Rufus, to LiLi, but every time I am greeted with the normal 3 option selection to try it, install it or check for disk integrity and every option returns the following.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Invalid magic number&#xA;Unaligned Pointer 0x9d3b0278 &#xA;Aborted. Press any key to exit.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My laptop is the Lenovo y50, with Intel i7 cpu and NVIDIA 860M GPU, currently running Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have formatted my USB several times to make sure it is on FAT32 format and I made sure that secure boot is disabled. Nothing works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I did check the hash sum with the one listed on the support page and everything seemed in order. &lt;/p&gt;&#xA;" OwnerUserId="4532" LastEditorUserId="3757" LastEditDate="2016-04-13T13:05:17.440" LastActivityDate="2016-04-13T13:05:33.863" Title="Error when installing Freya from USB: Invalid magic number Unaligned pointer" Tags="|system-installation|usb-drive|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4794" PostTypeId="2" ParentId="4793" CreationDate="2016-03-21T01:12:24.990" Score="0" Body="&lt;p&gt;Did you actually checked the MD5 Hash before burning to the Flashdrive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you don't know: Hashing is like comparing files to check if the file is corrupt or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the elementary OS Download page you can find the MD5 hash for the latest version. Get yourself a Windows MD5 Hashing Utility and check the image you just downloaded, then compare to the hash on the Download page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it equal? Well, you image is not corrupt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not? Even better! Just redownload and try again!&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="3757" LastEditDate="2016-04-13T13:05:33.863" LastActivityDate="2016-04-13T13:05:33.863" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4795" PostTypeId="1" AcceptedAnswerId="4804" CreationDate="2016-03-21T04:52:10.633" Score="0" ViewCount="539" Body="&lt;p&gt;I'm fairly new to the Linux community, but I have used it for a few years. I don't know much about how it works, but I think I can get around it with detailed instructions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways, today I decided to dual boot my MSI laptop with windows ten and elementary OS. I created a bootable USB and got to the setup screen for elementary OS. I configured the dual boot using the default options. It told me to restart and I got an error about safe boot. So I went into my BIOS and disabled safe boot. After I did that when I turn my computer on it boots directly into Windows, instead of Grub. However if I hit F11, I can then get to elementary OS, which will then launch Grub. I hope all of this makes some amount of sense. I have successfully booted a few times, but now all I get it my screen spammed with errors. They're all a little different, and there are way to many to type. But they all have the word &quot;nouveau E[&quot; if that means anything. Thank you so much in advance for any help you can provide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ben&lt;/p&gt;&#xA;" OwnerUserId="4534" LastActivityDate="2016-03-22T01:08:30.373" Title="Boot error messages spammed" Tags="|boot|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4796" PostTypeId="1" AcceptedAnswerId="4835" CreationDate="2016-03-21T12:07:24.033" Score="1" ViewCount="69" Body="&lt;p&gt;In Photos, whenever I try to view a picture that is black in colour with a transparent background, such as many icons, the photo is not visible as the colour of the background is the same as the foreground. I want to change the background colour to white so that I 'm able to view such images.&lt;/p&gt;&#xA;" OwnerUserId="4535" LastActivityDate="2016-03-25T15:05:16.290" Title="How to change the background colour in Photos?" Tags="|photos|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:04:10.150" ContentLicense="CC BY-SA 3.0" />
  <row Id="4797" PostTypeId="2" ParentId="3024" CreationDate="2016-03-21T13:22:33.837" Score="-2" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://sevenbits.github.io/Mac-Linux-USB-Loader/&quot; rel=&quot;nofollow&quot;&gt;https://sevenbits.github.io/Mac-Linux-USB-Loader/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked on my Macbook Pro 2010&lt;/p&gt;&#xA;" OwnerUserId="4537" LastEditorUserId="4537" LastEditDate="2016-03-22T14:26:12.513" LastActivityDate="2016-03-22T14:26:12.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4799" PostTypeId="1" AcceptedAnswerId="4819" CreationDate="2016-03-21T18:41:22.193" Score="2" ViewCount="3366" Body="&lt;p&gt;Are there any plans for tablet support? &#xA;You can add swipe, long press, right mouse button, scrolling, modify the keyboard...&lt;/p&gt;&#xA;" OwnerUserId="4541" LastEditorUserId="9" LastEditDate="2016-10-07T02:16:32.927" LastActivityDate="2021-08-14T15:38:21.850" Title="Will there be tablet support?" Tags="|system-installation|touchscreen|elementary-project|tablet|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4800" PostTypeId="1" CreationDate="2016-03-21T19:04:41.993" Score="1" ViewCount="268" Body="&lt;p&gt;When I try to shut down, the computer restarts instead. I have tried shutting down using both GUI and CLI. I have updated the system with the command &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt; but without luck. I also tried to change the grub file, but no positive results.&lt;/p&gt;&#xA;" OwnerUserId="4540" LastEditorUserId="229" LastEditDate="2016-05-22T06:25:30.123" LastActivityDate="2016-09-19T08:25:05.540" Title="Computer restarts instead of shutting down" Tags="|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4802" PostTypeId="2" ParentId="4800" CreationDate="2016-03-21T21:15:26.913" Score="1" Body="&lt;p&gt;Try typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sync &amp;amp;&amp;amp; sudo poweroff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;WARNING: This program will instantly shut off the computer so you may want to save some data if you are currently working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work too and your pc restarts, there might be a hardware or BIOS configuration problem.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-21T21:15:26.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4803" PostTypeId="2" ParentId="3646" CreationDate="2016-03-21T21:18:26.833" Score="1" Body="&lt;p&gt;If andrew's solution didn't work, make sure that you got your video drivers installed properly, or your system might run in software-rendering mode, because then your video will be rendered via CPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also check that with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;glxinfo | grep OpenGL&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Take a look at &lt;code&gt;Direct Rendering&lt;/code&gt;, if it says no, your CPU is rendering everything.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-21T21:18:26.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4804" PostTypeId="2" ParentId="4795" CreationDate="2016-03-22T01:08:30.373" Score="1" Body="&lt;p&gt;Nouveau = Open Source Graphics Driver for NVIDIA Cards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;nouveau simply doesn't support your card. You can install the original NVIDIA Driver for Linux which then should fix your problem. To temporarily disable nouveau so you can install the original Driver, you must add &lt;code&gt;nomodeset&lt;/code&gt; to your GRUB Kernel parameters. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep hitting the &lt;code&gt;shift&lt;/code&gt; key while booting until you see a small menu. Now hit &lt;code&gt;tab&lt;/code&gt; and add &lt;code&gt;nomodeset&lt;/code&gt; to the boot code. Perhaps you need to add a Space character between the &lt;code&gt;nomodeset&lt;/code&gt; and the rest of the kernel-booting-parameters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once Enter is hit, you should see elementary OS boot up.&#xA;Right after the startup you should open the driver-management-utility and select the proprietary NVIDIA Driver and press OK. Let it complete and then reboot the system, this time, without the nomodeset trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Congratulations, you just installed the proprietary NVIDIA Driver and you now have a working elementary OS Setup!&lt;/em&gt; &lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-22T01:08:30.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4806" PostTypeId="1" CreationDate="2016-03-22T11:01:54.547" Score="3" ViewCount="343" Body="&lt;p&gt;After disabling my second monitor via system settings, I cannot turn it on anymore with that setting. What did work is to enable it with the NVIDIA settings, but after writing that to Xorg I think I totally screwed up the &lt;code&gt;xorg.conf&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I unplug the second monitor and plug it back in the display comes back. But once I log out and back in the display is black again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I really have almost no idea what I am doing I need help to clean up this Xorg mess.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# nvidia-settings: X configuration file generated by nvidia-settings&#xA;# nvidia-settings:  version 361.28  (buildmeister@swio-display-x64-rhel04-04)  Wed Feb  3 16:26:48 PST 2016&#xA;&#xA;# nvidia-xconfig: X configuration file generated by nvidia-xconfig&#xA;# nvidia-xconfig:  version 361.28  (buildmeister@swio-display-x64-rhel04-04)  Wed Feb  3 16:27:53 PST 2016&#xA;&#xA;Section &quot;ServerLayout&quot;&#xA;    Identifier     &quot;Layout0&quot;&#xA;    Screen      0  &quot;Screen0&quot; 0 0&#xA;    InputDevice    &quot;Keyboard0&quot; &quot;CoreKeyboard&quot;&#xA;    InputDevice    &quot;Mouse0&quot; &quot;CorePointer&quot;&#xA;    Option         &quot;Xinerama&quot; &quot;0&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Files&quot;&#xA;EndSection&#xA;&#xA;Section &quot;InputDevice&quot;&#xA;&#xA;    # generated from default&#xA;    Identifier     &quot;Mouse0&quot;&#xA;    Driver         &quot;mouse&quot;&#xA;    Option         &quot;Protocol&quot; &quot;auto&quot;&#xA;    Option         &quot;Device&quot; &quot;/dev/psaux&quot;&#xA;    Option         &quot;Emulate3Buttons&quot; &quot;no&quot;&#xA;    Option         &quot;ZAxisMapping&quot; &quot;4 5&quot;&#xA;EndSection&#xA;&#xA;Section &quot;InputDevice&quot;&#xA;&#xA;    # generated from default&#xA;    Identifier     &quot;Keyboard0&quot;&#xA;    Driver         &quot;kbd&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Monitor&quot;&#xA;    Identifier     &quot;Monitor0&quot;&#xA;    VendorName     &quot;Unknown&quot;&#xA;    ModelName      &quot;Eizo EV2736W&quot;&#xA;    HorizSync       31.0 - 89.0&#xA;    VertRefresh     59.0 - 61.0&#xA;    Option         &quot;DPMS&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Monitor&quot;&#xA;    Identifier     &quot;Monitor1&quot;&#xA;    VendorName     &quot;Unknown&quot;&#xA;    ModelName      &quot;Eizo S2411W&quot;&#xA;    HorizSync       31.0 - 76.0&#xA;    VertRefresh     59.0 - 61.0&#xA;EndSection&#xA;&#xA;Section &quot;Device&quot;&#xA;    Identifier     &quot;Device0&quot;&#xA;    Driver         &quot;nvidia&quot;&#xA;    VendorName     &quot;NVIDIA Corporation&quot;&#xA;    BoardName      &quot;GeForce GTX 980&quot;&#xA;    BusID          &quot;PCI:5:0:0&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Device&quot;&#xA;    Identifier     &quot;Device1&quot;&#xA;    Driver         &quot;nvidia&quot;&#xA;    VendorName     &quot;NVIDIA Corporation&quot;&#xA;    BoardName      &quot;GeForce GTX 980&quot;&#xA;    BusID          &quot;PCI:5:0:0&quot;&#xA;    Screen          1&#xA;EndSection&#xA;&#xA;Section &quot;Screen&quot;&#xA;&#xA;# Removed Option &quot;nvidiaXineramaInfoOrder&quot; &quot;DFP-2&quot;&#xA;# Removed Option &quot;metamodes&quot; &quot;nvidia-auto-select +0+0&quot;&#xA;# Removed Option &quot;metamodes&quot; &quot;DP-2: nvidia-auto-select +0+0&quot;&#xA;# Removed Option &quot;metamodes&quot; &quot;DP-2: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +2560+0&quot;&#xA;# Removed Option &quot;metamodes&quot; &quot;DP-2: nvidia-auto-select +0+0, DVI-I-1: 1920x1200 +2560+0&quot;&#xA;    Identifier     &quot;Screen0&quot;&#xA;    Device         &quot;Device0&quot;&#xA;    Monitor        &quot;Monitor0&quot;&#xA;    DefaultDepth    24&#xA;    Option         &quot;Coolbits&quot; &quot;5&quot;&#xA;    Option         &quot;Stereo&quot; &quot;0&quot;&#xA;    Option         &quot;nvidiaXineramaInfoOrder&quot; &quot;DFP-4&quot;&#xA;    Option         &quot;metamodes&quot; &quot;DP-2: nvidia-auto-select +0+0, DVI-I-1: nvidia-auto-select +2560+0&quot;&#xA;    Option         &quot;SLI&quot; &quot;Off&quot;&#xA;    Option         &quot;MultiGPU&quot; &quot;Off&quot;&#xA;    Option         &quot;BaseMosaic&quot; &quot;off&quot;&#xA;    SubSection     &quot;Display&quot;&#xA;        Depth       24&#xA;    EndSubSection&#xA;EndSection&#xA;&#xA;Section &quot;Screen&quot;&#xA;&#xA;# Removed Option &quot;metamodes&quot; &quot;nvidia-auto-select +0+0&quot;&#xA;    Identifier     &quot;Screen1&quot;&#xA;    Device         &quot;Device1&quot;&#xA;    Monitor        &quot;Monitor1&quot;&#xA;    DefaultDepth    24&#xA;    Option         &quot;Coolbits&quot; &quot;5&quot;&#xA;    Option         &quot;Stereo&quot; &quot;0&quot;&#xA;    Option         &quot;metamodes&quot; &quot;DVI-I-1: nvidia-auto-select +0+0&quot;&#xA;    Option         &quot;SLI&quot; &quot;Off&quot;&#xA;    Option         &quot;MultiGPU&quot; &quot;Off&quot;&#xA;    Option         &quot;BaseMosaic&quot; &quot;off&quot;&#xA;    SubSection     &quot;Display&quot;&#xA;        Depth       24&#xA;    EndSubSection&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3813" LastEditorUserId="3757" LastEditDate="2016-03-23T07:13:51.497" LastActivityDate="2016-09-19T10:32:55.323" Title="Dual Monitor Setup stopped working / Screwed up xorg.conf file" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4807" PostTypeId="2" ParentId="4806" CreationDate="2016-03-22T12:05:35.893" Score="1" Body="&lt;p&gt;Okay, apparently I solved the issue myself, so I post this as an answer to my own question, maybe it helps someone with a similar problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did was to unplug the first monitor, then reboot. &#xA;Second monitor displayed the OS correctly.&#xA;Then plugged in the first monitor, which made both displays work. In the system settings changed the order of the displays and hit apply settings. &#xA;And that survived a log off/in and a restart.&#xA;So, seems the issue is solved. :)&lt;/p&gt;&#xA;" OwnerUserId="3813" LastActivityDate="2016-03-22T12:05:35.893" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4808" PostTypeId="1" CreationDate="2016-03-22T12:07:17.723" Score="3" ViewCount="243" Body="&lt;p&gt;Just bought a new Dell Inspiron 3162 11 inch (&lt;a href=&quot;http://www.dell.com/au/p/inspiron-11-3162-laptop/pd?ref=PD_OC&quot; rel=&quot;nofollow&quot;&gt;http://www.dell.com/au/p/inspiron-11-3162-laptop/pd?ref=PD_OC&lt;/a&gt;), and tried to install my first linux distro. I got this weird screen shaking (&lt;a href=&quot;https://www.youtube.com/watch?v=Mz1sXXtssXA&quot; rel=&quot;nofollow&quot;&gt;https://www.youtube.com/watch?v=Mz1sXXtssXA&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't committed to a full install, and I just want to make sure this issue is fixable before I overwrite my drive. I was running a live USB with Elementary OS in the video, and I've tried Ubuntu 14.04, Ubuntu 15.10 with the same shake. Ubuntu MATE has no shaking issue, but once I start my webcam, the shakes start. Lubuntu seems to be the only distro where there is no shaking, but I'm not 100% certain.&#xA;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="4548" LastActivityDate="2016-09-18T23:21:36.843" Title="Screen shake issue with Dell Inspiron 11" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4809" PostTypeId="2" ParentId="2005" CreationDate="2016-03-22T12:45:25.377" Score="1" Body="&lt;p&gt;You forgot to add some lines of code into the gtk-widgets.css to get the same window-controls. To fix the rest, open up the gtk-widgets.css file in the gtk-3.0 of my theme and search for this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/******************&#xA;* Window Controls *&#xA;******************/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now Copy everything beneath this comment (including the comment, if you want) and paste it into your custom gtk-widgets.css file and save it. After reloading the theme (by restart or by resetting in your theme-tweaker) it should do the job.&lt;/p&gt;&#xA;" OwnerUserId="4550" LastActivityDate="2016-03-22T12:45:25.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4811" PostTypeId="1" CreationDate="2016-03-22T15:21:58.983" Score="5" ViewCount="80" Body="&lt;p&gt;Sometimes I have to take multiple screenshots because when you trace the area, it highlights the area with a light-blue tint, and the screenshot is too fast and it catches that blue tint. Eventually it turns out right, but it's more and more often now that I have to take multiple screenshots before it finally takes one that isn't tinted blue from the selection screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to delay the shutter by a millisecond?&lt;/p&gt;&#xA;" OwnerUserId="2902" LastEditorUserId="45" LastEditDate="2016-04-17T15:51:11.100" LastActivityDate="2016-04-17T15:51:11.100" Title="How can I take screenshots with a delay?" Tags="|screenshot|" AnswerCount="1" CommentCount="6" ClosedDate="2016-04-21T18:10:47.830" ContentLicense="CC BY-SA 3.0" />
  <row Id="4812" PostTypeId="1" AcceptedAnswerId="4882" CreationDate="2016-03-22T18:18:11.353" Score="1" ViewCount="570" Body="&lt;p&gt;Actually I'm having a problem in switching on the proxy switch whenever I try to switch on my proxy switch then it automatically gets switched.&#xA;so I think setting the network proxy setting may resolve this issue.&lt;/p&gt;&#xA;" OwnerUserId="4553" LastEditorUserId="3757" LastEditDate="2016-03-23T03:40:12.020" LastActivityDate="2016-09-23T01:06:01.643" Title="How to reset network proxy settings" Tags="|settings|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4813" PostTypeId="2" ParentId="4808" CreationDate="2016-03-22T18:59:35.727" Score="1" Body="&lt;p&gt;You may be able to fix the issue by running these commands in Terminal after you install Elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mesa-utils&#xA;sudo mkdir /etc/X11/xorg.conf.d/&#xA;echo -e 'Section &quot;Device&quot;\n Identifier &quot;Intel Graphics&quot;\n Driver &quot;Intel&quot;\n Option &quot;AccelMethod&quot; &quot;sna&quot;\n Option &quot;TearFree&quot; &quot;true&quot;\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: comment #5 in &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861&quot; rel=&quot;nofollow noreferrer&quot;&gt;this ticket&lt;/a&gt;, as well as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1477/screen-flicker-blink-pulse-flash&quot;&gt;this Stack Exchange question&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-03-22T18:59:35.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4815" PostTypeId="2" ParentId="4522" CreationDate="2016-03-22T20:00:27.213" Score="0" Body="&lt;pre&gt;&lt;code&gt;vgchange -ay&#xA;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;also works for me, this is not a permanent solution though.&lt;/p&gt;&#xA;" OwnerUserId="4554" LastActivityDate="2016-03-22T20:00:27.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4816" PostTypeId="1" AcceptedAnswerId="5040" CreationDate="2016-03-22T21:59:04.757" Score="1" ViewCount="585" Body="&lt;p&gt;Having some errors after trying to upgrade with apt-get/synaptic.&#xA;There are several error messages in the output, like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;P: Installing debian theme...cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/reboot.c32’: No such file or directory&#xA;cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/config.c32’: No such file or directory&#xA;cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/vesamenu.c32’: No such file or directory&#xA;cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/hdt.c32’: No such file or directory&#xA;cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/rosh.c32’: No such file or directory&#xA;run-parts: /etc/kernel/postinst.d/zz-extlinux exited with return code 1&#xA;Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.19.0-56-generic.postinst line 1025.&#xA;dpkg: error processing package linux-image-3.19.0-56-generic (--configure):&#xA; subprocess installed post-installation script returned error exit status 2&#xA;dpkg: dependency problems prevent configuration of linux-image-extra-3.19.0-56-generic:&#xA; linux-image-extra-3.19.0-56-generic depends on linux-image-3.19.0-56-generic; however:&#xA;  Package linux-image-3.19.0-56-generic is not configured yet.`&#xA;&#xA;Then a cascade of similar messages just adding that one depends on the other one being configured.&#xA;&#xA;Bottom lines are:&#xA;&#xA;`Errors were encountered while processing:&#xA; linux-image-3.19.0-56-generic&#xA; linux-image-extra-3.19.0-56-generic&#xA; linux-image-generic-lts-vivid&#xA; linux-generic-lts-vivid&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've researched around a bit, failing to solve my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;apt-get install -f&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gives same∕similar error msg.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;dpkg --configure linux-image-extra-3.19.0-56-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tells me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: dependency problems prevent configuration of linux-image-extra-3.19.0-56-generic:&#xA;linux-image-extra-3.19.0-56-generic depends on linux-image-3.19.0-56-generic; however:&#xA;Package linux-image-3.19.0-56-generic is not configured yet.`&#xA;&#xA;`dpkg: error processing package linux-image-extra-3.19.0-56-generic (--configure):&#xA;dependency problems - leaving unconfigured&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also tried &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get autoremove&#xA;apt-get clean&#xA;apt-get autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've checked if there is a lack-of-space-problem - lots of free space.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --configure --pending&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Gives:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;dpkg: error processing package linux-image-extra-3.19.0-56-generic (--configure):&#xA;dependency problems - leaving unconfigured&#xA;Errors were encountered while processing:&#xA;linux-image-3.19.0-56-generic&#xA;linux-image-extra-3.19.0-56-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Plus a few more attempts - no luck. (I tried to completely remove old kernels in synaptic also, but that gives me same errors.)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;What have I done? Or is it you!?&#xA;What can I do? Do you need more info?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This isn't causing serious problems that I know of, but I love getting clean outputs from apt-get ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I hate being un-dated/-graded.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h3&gt;EDIT&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;It is an annoying problem because everytime I use apt-get it tries to work with the kernel-problem!!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h3&gt;EDIT 2&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;OK, I can't install anything ##AT ALL!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h3&gt;EDIT 3&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;The Software Updater, Sofware and Updates, Software Center apps are not launching.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h3&gt;EDIT 4&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Latest output of &lt;code&gt;apt-get dist-upgrade&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#apt-get dist-upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages will be REMOVED:&#xA;  linux-image-3.19.0-46-generic linux-image-3.19.0-53-generic&#xA;  linux-image-extra-3.19.0-46-generic linux-image-extra-3.19.0-53-generic&#xA;0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded.&#xA;16 not fully installed or removed.&#xA;&#xA;Need to get 330 MB of archives.&#xA;After this operation, 415 MB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA;&#xA;Get:1 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-39-generic amd64 3.19.0-39.44~14.04.1 [16,7 MB]&#xA;Get:2 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-41-generic amd64 3.19.0-41.46~14.04.2 [16,7 MB]&#xA;Get:3 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-42-generic amd64 3.19.0-42.48~14.04.1 [16,7 MB]&#xA;Get:4 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-43-generic amd64 3.19.0-43.49~14.04.1 [16,7 MB]&#xA;Get:5 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-47-generic amd64 3.19.0-47.53~14.04.1 [16,7 MB]&#xA;Get:6 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-3.19.0-56-generic amd64 3.19.0-56.62~14.04.1 [16,8 MB]&#xA;Get:7 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-39-generic amd64 3.19.0-39.44~14.04.1 [38,3 MB]&#xA;Get:8 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-41-generic amd64 3.19.0-41.46~14.04.2 [38,3 MB]&#xA;Get:9 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-42-generic amd64 3.19.0-42.48~14.04.1 [38,3 MB]&#xA;Get:10 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-43-generic amd64 3.19.0-43.49~14.04.1 [38,3 MB]&#xA;Get:11 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-47-generic amd64 3.19.0-47.53~14.04.1 [38,3 MB]&#xA;Get:12 http://no.archive.ubuntu.com/ubuntu/ trusty-updates/main linux-image-extra-3.19.0-56-generic amd64 3.19.0-56.62~14.04.1 [38,3 MB]&#xA;Fetched 330 MB in 44min 32s (124 kB/s)                                         &#xA;(Reading database ... 366348 files and directories currently installed.)&#xA;Removing linux-image-extra-3.19.0-46-generic (3.19.0-46.52~14.04.1) ...&#xA;depmod: FATAL: could not load /boot/System.map-3.19.0-46-generic: No such file or directory&#xA;run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;run-parts: executing /etc/kernel/postinst.d/dkms 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;update-initramfs: Generating /boot/initrd.img-3.19.0-46-generic&#xA;grep: /boot/config-3.19.0-46-generic: No such file or directory&#xA;depmod: WARNING: could not open /tmp/mkinitramfs_N1YerM/lib/modules/3.19.0-46-generic/modules.order: No such file or directory&#xA;depmod: WARNING: could not open /tmp/mkinitramfs_N1YerM/lib/modules/3.19.0-46-generic/modules.builtin: No such file or directory&#xA;run-parts: executing /etc/kernel/postinst.d/update-notifier 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;P: Checking for EXTLINUX directory... found.&#xA;P: Writing config for /boot/vmlinuz-3.19.0-54-generic...&#xA;P: Writing config for /boot/vmlinuz-3.19.0-49-generic...&#xA;P: Installing debian theme...cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/vesamenu.c32’: No such file or directory&#xA;run-parts: /etc/kernel/postinst.d/zz-extlinux exited with return code 1&#xA;dpkg: error processing package linux-image-extra-3.19.0-46-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;Removing linux-image-3.19.0-46-generic (3.19.0-46.52~14.04.1) ...&#xA;Examining /etc/kernel/postrm.d .&#xA;run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;update-initramfs: Deleting /boot/initrd.img-3.19.0-46-generic&#xA;run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.19.0-46-generic /boot/vmlinuz-3.19.0-46-generic&#xA;P: Checking for EXTLINUX directory... found.&#xA;P: Writing config for /boot/vmlinuz-3.19.0-54-generic...&#xA;P: Writing config for /boot/vmlinuz-3.19.0-49-generic...&#xA;P: Installing debian theme...cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/vesamenu.c32’: No such file or directory&#xA;run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1&#xA;Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.19.0-46-generic.postrm line 328.&#xA;dpkg: error processing package linux-image-3.19.0-46-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;Removing linux-image-extra-3.19.0-53-generic (3.19.0-53.59~14.04.1) ...&#xA;depmod: FATAL: could not load /boot/System.map-3.19.0-53-generic: No such file or directory&#xA;run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;run-parts: executing /etc/kernel/postinst.d/dkms 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;update-initramfs: Generating /boot/initrd.img-3.19.0-53-generic&#xA;grep: /boot/config-3.19.0-53-generic: No such file or directory&#xA;depmod: WARNING: could not open /tmp/mkinitramfs_5xBd4F/lib/modules/3.19.0-53-generic/modules.order: No such file or directory&#xA;depmod: WARNING: could not open /tmp/mkinitramfs_5xBd4F/lib/modules/3.19.0-53-generic/modules.builtin: No such file or directory&#xA;run-parts: executing /etc/kernel/postinst.d/update-notifier 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;run-parts: executing /etc/kernel/postinst.d/zz-extlinux 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;P: Checking for EXTLINUX directory... found.&#xA;P: Writing config for /boot/vmlinuz-3.19.0-54-generic...&#xA;P: Writing config for /boot/vmlinuz-3.19.0-49-generic...&#xA;P: Installing debian theme...cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/vesamenu.c32’: No such file or directory&#xA;run-parts: /etc/kernel/postinst.d/zz-extlinux exited with return code 1&#xA;dpkg: error processing package linux-image-extra-3.19.0-53-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;Removing linux-image-3.19.0-53-generic (3.19.0-53.59~14.04.1) ...&#xA;Examining /etc/kernel/postrm.d .&#xA;run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;update-initramfs: Deleting /boot/initrd.img-3.19.0-53-generic&#xA;run-parts: executing /etc/kernel/postrm.d/zz-extlinux 3.19.0-53-generic /boot/vmlinuz-3.19.0-53-generic&#xA;P: Checking for EXTLINUX directory... found.&#xA;P: Writing config for /boot/vmlinuz-3.19.0-54-generic...&#xA;P: Writing config for /boot/vmlinuz-3.19.0-49-generic...&#xA;P: Installing debian theme...cp: cannot stat ‘/usr/share/syslinux/themes/debian-wheezy/extlinux/vesamenu.c32’: No such file or directory&#xA;run-parts: /etc/kernel/postrm.d/zz-extlinux exited with return code 1&#xA;Failed to process /etc/kernel/postrm.d at /var/lib/dpkg/info/linux-image-3.19.0-53-generic.postrm line 328.&#xA;dpkg: error processing package linux-image-3.19.0-53-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;No apport report written because MaxReports is reached already&#xA;                                                              Errors were encountered while processing:&#xA; linux-image-extra-3.19.0-46-generic&#xA; linux-image-3.19.0-46-generic&#xA; linux-image-extra-3.19.0-53-generic&#xA; linux-image-3.19.0-53-generic&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3348" LastEditorUserId="4688" LastEditDate="2016-04-11T13:50:22.907" LastActivityDate="2017-10-06T14:10:44.980" Title="Trouble with APT, DPKG, SYNAPTIC. Linux-Image-thing" Tags="|kernel|updates|dependencies|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4817" PostTypeId="1" CreationDate="2016-03-22T22:15:52.287" Score="0" ViewCount="535" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TWFFp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TWFFp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;New important security and hardware support update&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;WARNING: Security updates for your current Hardware Enablement Stack ended on 2016-08-04: *&lt;a href=&quot;http://wiki.ubuntu.com/1404_HWE_EOL&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://wiki.ubuntu.com/1404_HWE_EOL&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I've read that the recently published version of Ubuntu 16.04, which is Ubuntu 14.04.5, comes with a new kernel and X stack in order to support a wider variety of hardware (see here: &lt;a href=&quot;https://wiki.ubuntu.com/TrustyTahr/ReleaseNotes&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/TrustyTahr/ReleaseNotes&lt;/a&gt; and here: &lt;a href=&quot;https://wiki.ubuntu.com/TrustyTahr/ReleaseNotes/ChangeSummary/14.04.5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/TrustyTahr/ReleaseNotes/ChangeSummary/14.04.5&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since elementary OS freya is based on Ubuntu 14.04: Does anybody know if and when these changes will be implemented in Freya, too?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="26" LastEditDate="2016-08-23T15:39:03.003" LastActivityDate="2016-08-23T15:39:03.003" Title="Should I upgrade the Hardware Enablement Stack? How should I do it?" Tags="|release-freya|hardware|kernel|ubuntu|" AnswerCount="2" CommentCount="0" ClosedDate="2016-08-23T15:39:21.667" ContentLicense="CC BY-SA 3.0" />
  <row Id="4818" PostTypeId="2" ParentId="4780" CreationDate="2016-03-22T22:50:25.653" Score="0" Body="&lt;p&gt;It looks like the problem is a bug which has been put on the list of issues to be resolved in the next version of Back in Time (see here: &lt;a href=&quot;https://github.com/bit-team/backintime/issues/556&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bit-team/backintime/issues/556&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Until it is fixed: I was able to work around the problem by naming the snapshot path on the new machine according to the path used on the old machine. You can find the settings for the path in the configuration menu under the first tab. This is essentially what Germar advises to do for versions of Back in Time below 1.1.0 in his answer to this issue &lt;a href=&quot;https://askubuntu.com/questions/416606/backintime-cannot-find-my-snapshots?rq=1&quot;&gt;https://askubuntu.com/questions/416606/backintime-cannot-find-my-snapshots?rq=1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in the meantime, if you want to use encrypted backups on a local device, better jot down the snapshot path. Otherwise you might not be able to easily access your encrypted backup if your HDD is broken. However, there's also a more complicated solution in the abovementioned github link.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-22T22:50:25.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4819" PostTypeId="2" ParentId="4799" CreationDate="2016-03-22T23:32:40.803" Score="4" Body="&lt;p&gt;elementary OS is focused on the PC and tablets are not officialy supported, but it is possible to install elementary OS on them &lt;a href=&quot;http://m.youtube.com/watch?v=EuzuoFt15YM&quot; rel=&quot;nofollow&quot;&gt;http://m.youtube.com/watch?v=EuzuoFt15YM&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4556" LastEditorUserId="3757" LastEditDate="2016-03-23T03:38:53.763" LastActivityDate="2016-03-23T03:38:53.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4821" PostTypeId="2" ParentId="4817" CreationDate="2016-03-23T06:57:25.267" Score="1" Body="&lt;p&gt;I don't thing that they will (but you could do it yourself). But elementary OS Loki is going to be released soon so I think you should wait for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In April Ubuntu 16.04 will be released and later Loki will be released&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-23T06:57:25.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4822" PostTypeId="2" ParentId="4559" CreationDate="2016-03-23T13:53:53.427" Score="2" Body="&lt;p&gt;To get the file extension you can use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;file -b --mime-type FILENAME&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in this case : &lt;code&gt;application/x-wine-extension-unitypackage&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, copy the icon you need to use to &lt;code&gt;/usr/share/icons/ICONTHEME&lt;/code&gt; in the mimetypes folder with this file name &lt;code&gt;application-x-wine-extension-unitypackage&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rebuild the icon cache using &lt;code&gt;sudo gtk-update-icon-cache -f /usr/share/icons/ICONTHEME&lt;/code&gt; and the new icon will be used.&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2016-03-23T13:53:53.427" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4823" PostTypeId="1" AcceptedAnswerId="5117" CreationDate="2016-03-23T14:42:23.963" Score="2" ViewCount="3112" Body="&lt;p&gt;My computer currently has Windows 10 installed with secure boot &lt;strong&gt;ON&lt;/strong&gt; and 100GB of unallocated space.The disk formatted as GPT and CSM off in firmware settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I would like to install elementary OS Freya 0.3.2 using the rEFInd bootloader.Secure boot needs to be enabled and I need to run Windows update (no renaming &lt;code&gt;refind_x64.efi&lt;/code&gt; to &lt;code&gt;bootmgrfw.efi&lt;/code&gt;) and have secure boot enabled (which I think can be done with &lt;code&gt;shim.efi&lt;/code&gt;).And also I need to use hybrid shutdown in Windows 10 (I can use it on a BIOS dual-boot PC).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used elementary OS Freya before using GRUB2 and BIOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop is a HP Pavilion g7 2269wm&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-26T02:15:36.987" LastActivityDate="2016-05-04T11:29:27.950" Title="How to install elementary OS Freya using rEFInd" Tags="|dual-boot|microsoft-windows|uefi|refind|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4824" PostTypeId="2" ParentId="4816" CreationDate="2016-03-23T21:23:03.043" Score="0" Body="&lt;p&gt;For me it seems that there are some files missing in &lt;code&gt;/usr/share/syslinux/themes/debian-wheezy/extlinux&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I list the files on my system in that directory I get this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux:/usr/share/syslinux/themes/debian-wheezy/extlinux$ ls -al&#xA;total 56&#xA;drwxr-xr-x 2 root root  4096 Okt 27 18:53 .&#xA;drwxr-xr-x 5 root root  4096 Okt 27 18:53 ..&#xA;lrwxrwxrwx 1 root root    38 Apr 15  2015 config.c32 -&amp;gt; ../../../../../lib/syslinux/config.c32&#xA;lrwxrwxrwx 1 root root    35 Apr 15  2015 hdt.c32 -&amp;gt; ../../../../../lib/syslinux/hdt.c32&#xA;lrwxrwxrwx 1 root root    20 Apr 15  2015 memtest.bin -&amp;gt; /boot/memtest86+.bin&#xA;-rw-r--r-- 1 root root   349 Sep 20  2012 menu.cfg&#xA;-rw-r--r-- 1 root root   349 Sep 20  2012 other.cfg&#xA;lrwxrwxrwx 1 root root    38 Apr 15  2015 reboot.c32 -&amp;gt; ../../../../../lib/syslinux/reboot.c32&#xA;lrwxrwxrwx 1 root root    36 Apr 15  2015 rosh.c32 -&amp;gt; ../../../../../lib/syslinux/rosh.c32&#xA;-rw-r--r-- 1 root root 31377 Apr 15  2015 splash.png&#xA;-rw-r--r-- 1 root root   529 Sep 20  2012 stdmenu.cfg&#xA;-rw-r--r-- 1 root root   100 Sep 20  2012 theme.cfg&#xA;lrwxrwxrwx 1 root root    40 Apr 15  2015 vesamenu.c32 -&amp;gt; ../../../../../lib/syslinux/vesamenu.c32`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should compare this to your content here.&#xA;But it seems that all the symbolic links are broken or gone. With the command &lt;code&gt;sudo dpkg -S /usr/share/syslinux/themes/debian-wheezy/extlinux/config.c32&lt;/code&gt; I found out the package which provides this file and got the name &quot;syslinux-themes-debian-wheezy&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you should try to reconfigure this package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure syslinux-themes-debian-wheezy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this does not work you can try to create the links manually. Go to the directory and type the command (e.g. for config.c32):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/syslinux/themes/debian-wheezy/extlinux&#xA;sudo ln -s ../../../../../lib/syslinux/config.c32 config.c32&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For the other files look at the locations in the &quot;ls -al&quot; command above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NOTE:&lt;/strong&gt; This is not tested by me! So you should be careful! I would suggest to create a backup of the files stored in &lt;code&gt;/usr/lib/syslinux&lt;/code&gt; (destination of the linked files)!&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-03-23T21:23:03.043" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4825" PostTypeId="1" CreationDate="2016-03-23T23:47:54.623" Score="1" ViewCount="460" Body="&lt;p&gt;When attempting to install Steam, I get this error message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Some packages could not be installed. This may mean that you have&#xA;  requested an impossible situation or if you are using the unstable&#xA;  distribution that some required packages have not yet been created&#xA;  or been moved out of Incoming.&#xA;  The following information may help to resolve the situation:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The following packages have unmet dependencies:&#xA;   steam:i386 : Depends: libgl1-mesa-glx:i386&#xA;  E: Unable to correct problems, you have held broken packages.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I've searched through other forums and they all suggest essentially the same things, all of which I have tried, to no avail.&lt;/p&gt;&#xA;" OwnerUserId="4440" LastActivityDate="2016-03-23T23:58:08.773" Title="Unmet Dependencies and Broken Packages" Tags="|apt|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4826" PostTypeId="2" ParentId="4825" CreationDate="2016-03-23T23:58:08.773" Score="2" Body="&lt;p&gt;This is a common problem to install steam and hace happened to many users.&#xA;To install steam you need to install some 32-bit libraries &#xA;Run the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install libgl1-mesa-glx-lts-utopic:i386&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install steam, everything should work fine.&lt;/p&gt;&#xA;" OwnerUserId="4556" LastActivityDate="2016-03-23T23:58:08.773" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4827" PostTypeId="1" CreationDate="2016-03-24T03:11:26.843" Score="-3" ViewCount="120" Body="&lt;p&gt;I deleted a file - &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/lib/x86_64-linux-gnu/libssl.so.10&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;under the false impression that I would be able to easily download a new copy of that file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file is needed (I believe) for me to be able to run mongodb shell. When I type 'mongo' to the terminal, I get the error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;mongo: error while loading shared libraries: libssl.so.10: cannot open shared object file: No such file or directory&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In case this isn't clear, I know that this file is not present because I deleted it myself. I now want to get the file back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a list of methods I've attempted in order to get this file back:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Downloads through apt-get install. Commonly suggested on other threads/forums for problems with this same 'libssl.so.10' file was a package 'libssl1.0.0'. Unfortunately, that package, nor any other package I've seen/downloaded has replaced the file I deleted. [No 'libssl.so.10' file has been created].&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've tried to download rpm files (&lt;a href=&quot;http://rpm.pbone.net/index.php3/stat/3/srodzaj/1/search/libssl.so.10()(64bit)&quot; rel=&quot;nofollow&quot;&gt;http://rpm.pbone.net/index.php3/stat/3/srodzaj/1/search/libssl.so.10()(64bit)&lt;/a&gt;) to install this file. Through the sites I've found that offer these, none have supplied files explicitly for Elementary OS. I don't really understand what to do with these files and am concerned that I could make the problem worse by blindly following.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've attempted to set-up a dual boot on my rather old laptop, to also run elementary OS, then I thought I could copy the file across. While following this guide: (&lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt;), the 'rufus' program froze that laptop at the same point three times in a row. I discontinued my attempts.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I explored using 'testdisk' to recover the deleted file. Given that I deleted the file 2 or 3 days ago at this point and I am concerned about removing making the problem far worse, I didn't want to pursue this.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Can anybody suggest an easier/more successful way I could recover this file?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="4562" LastActivityDate="2016-03-24T22:18:28.993" Title="I've deleted a file I need in the /lib directory. I am struggling to recover that file" Tags="|release-freya|applications|software-installation|system|apt|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4831" PostTypeId="2" ParentId="4827" CreationDate="2016-03-24T13:28:52.753" Score="4" Body="&lt;p&gt;Run &lt;code&gt;sudo apt-get install --reinstall libssl1.0.0&lt;/code&gt; in the terminal to reinstall the &lt;strong&gt;libssl&lt;/strong&gt; library on system&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I recommend before deleting a important file always rename it to &lt;code&gt;YOURFILENAME.old&lt;/code&gt; or &lt;code&gt;YOURFILENAME.bak&lt;/code&gt;. Then if you have problems you can always rename it back to the original name :)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So next time don't delete important files like that because you could delete something more important which could cause the OS to be unbootable . If you rename instead of deleting you could always rename it back using the Live USB / CD&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="565" LastEditDate="2016-03-24T22:18:28.993" LastActivityDate="2016-03-24T22:18:28.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4833" PostTypeId="1" AcceptedAnswerId="5359" CreationDate="2016-03-24T20:54:09.370" Score="2" ViewCount="123" Body="&lt;p&gt;Suddenly nice top-right notifications stopped working for some apps (Slack and Music apps for example). An ugly and annoying traditional ok/cancel alert is being show instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dtgNi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dtgNi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo touch /usr/lib/libunity-electron_notification_fix&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fixes the issue until I restart the computer.&lt;/p&gt;&#xA;" OwnerUserId="4570" LastEditorUserId="4570" LastEditDate="2016-05-07T22:33:42.220" LastActivityDate="2016-09-05T01:24:56.100" Title="Notification system showing ugly Ok-Cancel alert" Tags="|release-freya|notifications|" AnswerCount="1" CommentCount="2" ClosedDate="2016-12-09T16:07:13.833" ContentLicense="CC BY-SA 3.0" />
  <row Id="4834" PostTypeId="1" AcceptedAnswerId="5062" CreationDate="2016-03-25T03:20:11.423" Score="1" ViewCount="106" Body="&lt;p&gt;I have duplicate icons for the calculator, universal access and network icons in the applications menu and system settings windows after performing a software update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get rid of the duplicates? Is there a way to manually edit the slingshot-launcher database?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-04-11T18:50:37.453" LastActivityDate="2016-10-02T21:07:15.307" Title="duplicate calculator, network and universal access icons after software update" Tags="|updates|slingshot|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4835" PostTypeId="2" ParentId="4796" CreationDate="2016-03-25T11:09:37.150" Score="0" Body="&lt;p&gt;This was filed as a bug in Photos in 2014, but it seems like it hasn't been fixed yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider raising attention to it: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-photos/+bug/1394320&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-photos/+bug/1394320&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4502" LastEditorUserId="4502" LastEditDate="2016-03-25T15:05:16.290" LastActivityDate="2016-03-25T15:05:16.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4836" PostTypeId="2" ParentId="4770" CreationDate="2016-03-25T11:26:14.263" Score="1" Body="&lt;p&gt;Adding the Greek layout in the keyboard settings should be enough. &lt;/p&gt;&#xA;" OwnerUserId="4502" LastActivityDate="2016-03-25T11:26:14.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4837" PostTypeId="1" CreationDate="2016-03-25T12:04:49.143" Score="4" ViewCount="290" Body="&lt;p&gt;I'm trying to make the Application Launcher appear when I press the Windows key but it seems like I have to enter at least two keys to make a shortcut (currently doing Win+space)?&lt;/p&gt;&#xA;" OwnerUserId="4576" LastActivityDate="2016-04-02T15:02:45.123" Title="Is it possible to add a single key shortcut?" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4838" PostTypeId="1" CreationDate="2016-03-25T12:21:57.023" Score="0" ViewCount="777" Body="&lt;p&gt;Hello and thank you very much for the great work you are doing with Elementary ! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an old laptop running Freya and want to change it to a new  i7-6700HQ + Nvidia GTX 950m, and as far as I've seen, Freya 0.3.2 is still shipped with the 3.16 linux kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simple question, and I want to keep Freya, will it work with the new Skylake CPU or should I upgrade the kernel manually to 4.4 or 4.5, how will be the support for the Intel HD graphic and the Nvidia card ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks !&lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2016-03-25T12:36:38.403" LastActivityDate="2016-08-19T22:36:10.943" Title="Elementary Freya on Skylake CPU + Nvidia card &gt; kernel and graphic drivers question" Tags="|system-installation|graphic-drivers|intel|nvidia|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4840" PostTypeId="1" CreationDate="2016-03-25T13:52:44.450" Score="-1" ViewCount="135" Body="&lt;p&gt;I have a &lt;code&gt;.desktop&lt;/code&gt; file to start &lt;a href=&quot;http://www.webupd8.org/2015/02/youtube-viewer-complete-youtube-client.html&quot; rel=&quot;nofollow&quot;&gt;Youtube-Viewer&lt;/a&gt; which is an application that runs in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command to use is something like &lt;code&gt;youtube-viewer --video-player=mplayer&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works when I fire that in a terminal, but I want to add it in a &lt;code&gt;.desktop&lt;/code&gt; file (and put that in &lt;code&gt;usr/share/applications&lt;/code&gt; or &lt;code&gt;~/.share/applications&lt;/code&gt;). In Linux Mint, which I use in parallel, a such desktop file works:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Youtube-viewer&#xA;Exec=bash -c 'youtube-viewer --video-player=mplayer'&#xA;Icon=youtube-viewer&#xA;Terminal=true&#xA;Type=Application&#xA;Categories=AudioVideo;Player;Recorder;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But that does not work as it should in elementary OS, it just does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing here?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know why the line &lt;code&gt;Exec=bash -c 'youtube-viewer --video-player=mplayer'&lt;/code&gt; isn't working, but what works is &lt;code&gt;Exec=pantheon-terminal -e 'youtube-viewer --video-player=mplayer'&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE2&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A script like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;bash -c 'youtube-viewer --video-player=mplayer'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this works:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;pantheon-terminal -e 'youtube-viewer --video-player=mplayer'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="3757" LastEditDate="2016-04-13T13:01:05.577" LastActivityDate="2016-04-13T13:01:05.577" Title="Why isn't `bash -c` working in this desktop/launcher?" Tags="|pantheon-terminal|command-line|launcher|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4841" PostTypeId="2" ParentId="4840" CreationDate="2016-03-25T14:56:59.497" Score="1" Body="&lt;p&gt;Both options work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you checked whether you can run the first option &lt;code&gt;bash -c 'youtube-viewer --video-player=mplayer'&lt;/code&gt; on a Terminal?&lt;/p&gt;&#xA;" OwnerUserId="4502" LastActivityDate="2016-03-25T14:56:59.497" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4842" PostTypeId="1" CreationDate="2016-03-25T14:58:32.777" Score="1" ViewCount="103" Body="&lt;p&gt;How can I change the metadata for several images at the same time (batch edit)? For example, comments and titles.&lt;/p&gt;&#xA;" OwnerUserId="4578" LastEditorUserId="5565" LastEditDate="2016-10-06T02:13:10.440" LastActivityDate="2016-10-06T02:13:10.440" Title="Change metadata on several images at once" Tags="|software-recommendation|photos|metadata|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4843" PostTypeId="1" AcceptedAnswerId="4945" CreationDate="2016-03-25T16:14:59.337" Score="1" ViewCount="2305" Body="&lt;p&gt;Can I choose that encoding instead of the default? I can open a file with similar apps. If I open the same file with Scratch, it displays non-readable characters. I cannot find the appropriate setting for changing that. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="2409" LastEditorUserId="3757" LastEditDate="2016-05-06T14:32:16.717" LastActivityDate="2016-05-06T14:32:16.717" Title="How to change the Encoding? (Greek- ISO-8859-7)" Tags="|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4844" PostTypeId="1" AcceptedAnswerId="4861" CreationDate="2016-03-25T16:17:44.257" Score="11" ViewCount="1383" Body="&lt;p&gt;I have two questions.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;What is the default keystroke for cycling through windows in an application, e.g., evince?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;How can I change this default?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Currently, Alt-tab cycles through all windows, but I only want to cycle through windows of the same application.&lt;/p&gt;&#xA;" OwnerUserId="4387" LastEditorDisplayName="user170" LastEditDate="2017-02-14T18:28:58.253" LastActivityDate="2017-02-16T12:19:35.730" Title="How does one cycle through windows of the same application?" Tags="|applications|keyboard-shortcuts|window-management|" AnswerCount="2" CommentCount="1" ClosedDate="2017-02-19T20:40:12.093" ContentLicense="CC BY-SA 3.0" />
  <row Id="4845" PostTypeId="2" ParentId="4842" CreationDate="2016-03-25T16:18:04.697" Score="0" Body="&lt;p&gt;You can try installing gThumb Image Viewer, by typing on the Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:webupd8team/gthumb&#xA;sudo apt-get update&#xA;sudo apt-get install gthumb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2409" LastActivityDate="2016-03-25T16:18:04.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4846" PostTypeId="2" ParentId="4725" CreationDate="2016-03-25T18:30:22.843" Score="5" Body="&lt;p&gt;&lt;code&gt;vlc&lt;/code&gt; allows you to cycle between different aspect ratios using the &lt;code&gt;a&lt;/code&gt; key or the menu &lt;code&gt;Video-&amp;gt;Aspect Ratio&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mpv&lt;/code&gt; allows to cycle between different aspect ratios with a key set in &lt;code&gt;~/.mpv/input.conf&lt;/code&gt;. To use the &lt;code&gt;A&lt;/code&gt; key, you need to have the line &lt;code&gt;A cycle-values video-aspect &quot;16:9&quot; &quot;4:3&quot; &quot;2.35:1&quot; &quot;-1&quot;&lt;/code&gt;. The file (and folder) can (and may need to) be created manually at that location, copy it from &lt;a href=&quot;https://github.com/mpv-player/mpv/blob/master/etc/input.conf&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;: just uncomment that line (delete &lt;code&gt;#&lt;/code&gt; in front), or set another key combination, like &lt;code&gt;a&lt;/code&gt; or &lt;code&gt;Alt-a&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4502" LastEditorDisplayName="user170" LastEditDate="2016-12-12T13:20:52.750" LastActivityDate="2016-12-12T13:20:52.750" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4847" PostTypeId="2" ParentId="4842" CreationDate="2016-03-25T19:32:42.483" Score="1" Body="&lt;p&gt;There are two good tools to edit meta-data of image-files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;exiftool and exiv2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;exiftool:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will find exif &lt;a href=&quot;http://www.sno.phy.queensu.ca/~phil/exiftool/&quot; rel=&quot;nofollow&quot;&gt;here: official site&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also has a graphical frontend: &lt;a href=&quot;https://savannah.nongnu.org/projects/fotopreprocessor/&quot; rel=&quot;nofollow&quot;&gt;frontend for exif&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;exiv2:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a better tool than &lt;strong&gt;exiftool&lt;/strong&gt;. You can find it here: &lt;a href=&quot;http://www.exiv2.org/&quot; rel=&quot;nofollow&quot;&gt;official site&lt;/a&gt;.&lt;br&gt;&#xA;Here is a man page on how to use this: &lt;a href=&quot;http://linux.die.net/man/1/exiv2&quot; rel=&quot;nofollow&quot;&gt;exiv2 man page&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastActivityDate="2016-03-25T19:32:42.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4848" PostTypeId="2" ParentId="4281" CreationDate="2016-03-25T21:43:53.927" Score="1" Body="&lt;p&gt;OK, so the problem can be solved much easier than installing a new kernel - namely by activating the proprietary drivers for AMD Radeon graphics card (called fglrx). You can choose between fglrx and the open source xorg drivers in the additional drivers tab of the update settings. After fglrx has been installed, the problem doesn't occur anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it looks like either the Xorg drivers - which are activated by default - do not work with an AMD Radeon M335, or the problem is the Intel Skylake graphics chipset because the AMD card isn't detected/activated at all without the fglrx drivers (this might be the case because when I ran &quot;lspci -nnk | grep &quot;VGA\|'Kern'\|3D\|Display&quot; -A2&quot; the AMD Radeon card wasn't detected at all, but I can't tell for sure).&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:43:53.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4849" PostTypeId="2" ParentId="3997" CreationDate="2016-03-25T21:46:52.613" Score="1" Body="&lt;p&gt;It actually is compatible, but not with the open source xorg drivers that are activated by default. You have to use the proprietary drivers (called fglrx) which are included in the repositories. You can choose between fglrx and the open source xorg drivers in the additional drivers tab of the update settings.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:46:52.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4850" PostTypeId="2" ParentId="4761" CreationDate="2016-03-25T21:50:51.947" Score="0" Body="&lt;p&gt;Seems like the problem is the open source xorg drivers that are activated by default. You have to use the proprietary drivers (called fglrx) instead, which are included in the repositories. You can choose between fglrx and the open source xorg drivers in the additional drivers tab of the update settings. Once activated, the Radeon R5 M335 is detected and apparently works fine.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:50:51.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4852" PostTypeId="1" CreationDate="2016-03-25T21:53:33.853" Score="0" ViewCount="816" Body="&lt;p&gt;I'm having trouble opening System Settings. I get this error code when I try and run &lt;code&gt;switchboard&lt;/code&gt; in the terminal (as it won't open by clicking):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;(switchboard:16560): Gdk-ERROR **: The program 'switchboard' received an X Window System error.&#xA;This probably reflects a bug in the program.&#xA;The error was 'BadValue (integer parameter out of range for operation)'.&#xA;  (Details: serial 159 error_code 2 request_code 154 (GLX) minor_code 24)&#xA;  (Note to programmers: normally, X errors are reported asynchronously;&#xA;   that is, you will receive the error a while after causing it.&#xA;   To debug your program, run it with the GDK_SYNCHRONIZE environment&#xA;   variable to change this behavior. You can then get a meaningful&#xA;   backtrace from your debugger if you break on the gdk_x_error() function.)&#xA;/usr/bin/gnome-control-center: line 20: 16560 Trace/breakpoint trap   (core dumped) switchboard $switchboard_options $requested_plug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Any help would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="4581" LastEditorUserId="5565" LastEditDate="2016-10-07T02:18:01.200" LastActivityDate="2016-12-06T03:12:46.587" Title="System Settings won't open – Gdk-ERROR **: The program 'switchboard' received an X Window System error" Tags="|window-manager|switchboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4853" PostTypeId="2" ParentId="4714" CreationDate="2016-03-25T21:55:07.730" Score="1" Body="&lt;p&gt;You will also need to &lt;pre&gt;&lt;code&gt;pactl load-module module-bluetooth-discover&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will likely have to disconnect from the bluetooth headset and reconnect&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2016-03-25T21:55:07.730" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4854" PostTypeId="2" ParentId="4762" CreationDate="2016-03-25T21:55:54.923" Score="0" Body="&lt;p&gt;OK, so it looks like the problem is caused by missing drivers for the AMD Radeon R5 M335 graphics card. You can solve it by activating the proprietary drivers for AMD Radeon graphics card (called fglrx). You can choose between fglrx and the open source xorg drivers in the additional drivers tab of the update settings. After fglrx has been installed, the problem doesn't occur anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it looks like either the Xorg drivers - which are activated by default - do not work with an AMD Radeon M335, or the problem is the Intel Skylake graphics chipset because the AMD card isn't detected/activated at all without the fglrx drivers (this might be the case because when I ran &quot;lspci -nnk | grep &quot;VGA\|'Kern'\|3D\|Display&quot; -A2&quot; the AMD Radeon card wasn't detected at all, but I can't tell for sure).&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-03-25T21:55:54.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4855" PostTypeId="2" ParentId="4838" CreationDate="2016-03-25T22:10:12.477" Score="1" Body="&lt;p&gt;The kernel has been updated since the last available disk image. It is now 3.19.0-56 (after updating the system). I don't know about NVidia drivers since I have an AMD Radeon, but otherwise I have a new i7-6500U machine and it works totally fine with that config. I had a minor problem with the open source xorg drivers for the Radeon card, but that one could be solved by using the proprietary drivers that are included in the repositories. For newer NVidia graphics cards, there is a proprietary driver called &quot;nvidia&quot; which should also be included (you should be able to select it in the additional drivers tab in the update settings).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To test if 3D acceleration works, install mesa utils:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install mesa-utils&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;glxinfo | grep rendering&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;glxgears&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the latter case, you should see a window with moving cogs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd say give it a shot :) You can update to a newer kernel afterwards if necessary, and with Ubuntu 16.04 coming soon, there should be a new version of elementary in the not too distant future anyway...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT: The new Ubuntu 14.04 hardware enablement stack including kernel 4.4 is now available in freya 0.3.2 - just run the update manager&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-08-19T22:36:10.943" LastActivityDate="2016-08-19T22:36:10.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4857" PostTypeId="1" CreationDate="2016-03-25T23:54:47.387" Score="1" ViewCount="60" Body="&lt;p&gt;I have installed elementary freya on it's own partition so that I can dual boot it with Windows 10. Within a minute of booting, the screen will go black, return to normal and then freeze. ctrl+alt+F1 does nothing. The mouse still moves but it's staggered and I can't click anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume this is a driver issue as I have elementary running fine on my laptop. My specs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i5 4690k&lt;/li&gt;&#xA;&lt;li&gt;R9 390 8GB&lt;/li&gt;&#xA;&lt;li&gt;8GB RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Any solutions or even a way to see an error message would be useful!&lt;/p&gt;&#xA;" OwnerUserId="4583" LastActivityDate="2016-03-25T23:54:47.387" Title="Black screen and freeze within a minute of boot" Tags="|release-freya|crash|" AnswerCount="0" CommentCount="0" ClosedDate="2019-02-20T16:21:39.080" ContentLicense="CC BY-SA 3.0" />
  <row Id="4858" PostTypeId="2" ParentId="4838" CreationDate="2016-03-26T01:26:58.843" Score="0" Body="&lt;p&gt;I just installed freya on a skylake intel nuc i3.&#xA;The distro and updated kernel were missing the newest wifi drivers. &#xA;I then tried several kernels. 4.2.8 is what works now for me. &#xA;4.4 and 4.5 caused weird ripping graphic glitches on the desktop. &#xA;BUT I still had to add &#xA;i915.preliminary_hw_support=1 &#xA;to grub to have hardware acceleration. I used the solution from &lt;a href=&quot;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=intel-skl-prelim-support&quot; rel=&quot;nofollow&quot;&gt;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=intel-skl-prelim-support&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-03-26T01:26:58.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4860" PostTypeId="1" CreationDate="2016-03-26T09:53:59.767" Score="1" ViewCount="518" Body="&lt;p&gt;After installing the LibreOffice 5.1 update there's a weird visual glitch with toolbars. &#xA;Can I do anything about it? &#xA;Thank you! &#xA;&lt;a href=&quot;https://i.stack.imgur.com/oeJz7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oeJz7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPD: the problem is that there are these strange-looking white lines above toolbars. &lt;/p&gt;&#xA;" OwnerUserId="4587" LastEditorUserId="4587" LastEditDate="2016-03-27T06:27:06.560" LastActivityDate="2016-04-26T06:35:05.320" Title="LibreOffice 5.1 looks weird" Tags="|user-interface|libreoffice|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4861" PostTypeId="2" ParentId="4844" CreationDate="2016-03-26T11:06:32.237" Score="3" Body="&lt;p&gt;&lt;strong&gt;Edit: This is not the correct answer for the above question. When i wrote this i was thinking about tabs of an application and not windows. So, this answer works for cycling through tabs of an app.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;PgUp/PgDn&lt;/code&gt; is the default keyboard shortcut to cycle through windows/tabs in an application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In some applications if &lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;PgUp/PgDn&lt;/code&gt; doesn't work, try &lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;Shift&lt;/code&gt; + &lt;code&gt;PgUp/PgDn&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a list of keyboard shortcuts in elementary: &lt;a href=&quot;http://lmelinux.net/2014/07/26/elementary-os-keyboard-shortcuts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary os keyboard shortcuts&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also refer to the answer to this question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1441/what-are-the-different-methods-to-switch-between-windows-and-workspaces&quot;&gt;here&lt;/a&gt;, which is similar to yours.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a detailed reading: &lt;a href=&quot;https://elementary.io/docs/learning-the-basics#app-windows&quot; rel=&quot;nofollow noreferrer&quot;&gt;learning elementary basics&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-15T17:29:50.187" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4862" PostTypeId="2" ParentId="4860" CreationDate="2016-03-26T21:41:52.347" Score="2" Body="&lt;p&gt;LibreOffice are moving from Gtk2 to Gtk3, it's not complete yet and buggy. And the toolbar does not use the correct css class that's why. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same issue in other distros/themes.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/J9bTn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J9bTn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Screenshot using the latest version of Libreoffice, Gtk 3.20, Arc theme and Arch as distro.&lt;/p&gt;&#xA;" OwnerUserId="191" LastActivityDate="2016-03-26T21:41:52.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4864" PostTypeId="1" AcceptedAnswerId="4870" CreationDate="2016-03-27T01:08:57.270" Score="0" ViewCount="1471" Body="&lt;p&gt;I know how to do this via the command line but it would be nice if I could also do it using the GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately the files app 'Connect to Server...' dialogue does not include NFS as a server detail Type.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="3757" LastEditDate="2016-03-27T03:38:16.200" LastActivityDate="2022-10-07T07:55:45.560" Title="Any way to mount NFS shares via the Pantheon file manager" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4865" PostTypeId="1" AcceptedAnswerId="4889" CreationDate="2016-03-27T03:59:47.673" Score="0" ViewCount="242" Body="&lt;p&gt;Installed dependencies like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install cmake libvala-0.30-dev valac-0.30 libwebkitgtk-3.0-dev libgranite-dev libcanberra-dev&#xA;libsqlite3-dev libgmime-2.6-dev libsecret-1-dev libgcr-3-dev libgirepository1.0-dev valadoc&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then tried to build the new pantheon-mail but getting stuck at this error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[ 76%] Generating .pantheon-mail.stamp&#xA;/usr/local/src/pantheon-mail/src/client/conversation-viewer/ConversationWidget.vala:98.13-98.34: error: The type name `Granite.Widgets.Avatar' could not be found&#xA;    private Granite.Widgets.Avatar avatar;&#xA;            ^^^^^^^^^^^^^^^^^^^^^^&#xA;Compilation failed: 1 error(s), 0 warning(s)&#xA;make[2]: &lt;strong&gt;* [src/.pantheon-mail.stamp] Error 1&#xA;make[1]: *&lt;/strong&gt; [src/CMakeFiles/pantheon-mail.dir/all] Error 2&#xA;make: *** [all] Error 2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure how to proceed, any build tips appreciated&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-04-01T17:46:35.097" Title="&quot;The type name `Granite.Widgets.Avatar' could not be found&quot; error building pantheon-mail" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4866" PostTypeId="1" CreationDate="2016-03-27T08:30:50.520" Score="3" ViewCount="963" Body="&lt;p&gt;I may be missing something or just inexperienced but I cant find a way to drag files or folders in elementary. im used to windows and ubuntu 14.04 (both of which make this easy) I like the clean interface of elementary but this is frustrating &lt;/p&gt;&#xA;" OwnerUserId="4597" LastActivityDate="2016-08-24T15:20:47.833" Title="cant drag files or folders anywhere in freya" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4867" PostTypeId="2" ParentId="4866" CreationDate="2016-03-27T12:00:54.427" Score="3" Body="&lt;p&gt;Hold the right-click button and drag using the trackpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you hold the right-click button too long before dragging, then the contextual menu opens up instead.&lt;/p&gt;&#xA;" OwnerUserId="4387" LastActivityDate="2016-03-27T12:00:54.427" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4868" PostTypeId="2" ParentId="4757" CreationDate="2016-03-27T12:45:33.710" Score="0" Body="&lt;p&gt;Ok, thank you for all your help, I'm really impressed by the response.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did try all mentioned solutions but what helped me was uninstalling gnome-terminal - after that there is no screen dimming at all, which was what I wanted to achieve.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once more, thank you all for responses, I really appreciate that!&lt;/p&gt;&#xA;" OwnerUserId="4498" LastActivityDate="2016-03-27T12:45:33.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4869" PostTypeId="1" AcceptedAnswerId="4878" CreationDate="2016-03-27T15:07:54.450" Score="-1" ViewCount="498" Body="&lt;p&gt;I installed a graphics driver update using NeteXt'73 and now my screen goes permanently black soon after the pulsating elementary logo boot animation. How can I fix this? I cannot login nor access the terminal. I am running on a Lenovo Y50 with a NVIDIA® GeForce™ GTX 860M.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: I have tried &lt;a href=&quot;https://askubuntu.com/questions/450046/black-screen-with-nvidia-drivers-on-ubuntu&quot;&gt;this&lt;/a&gt; and &lt;a href=&quot;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&quot;&gt;this&lt;/a&gt; but I can't uninstall the drivers when booting into recovery because it says everything is &quot;read-only&quot;. &lt;/p&gt;&#xA;" OwnerUserId="4600" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-03-28T03:25:25.337" Title="Elementary OS Black screen after driver update?" Tags="|release-freya|boot|graphic-drivers|system|display|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4870" PostTypeId="2" ParentId="4864" CreationDate="2016-03-27T18:36:32.223" Score="2" Body="&lt;p&gt;Pantheon Files does not currently have this feature. Currently, the &quot;Connect Server&quot; dialog only works for protocols that can be mounted using gvfs.  NFS servers are often connected at start up using etc/fstab.  If you are using NFS for an always on NAS for example this is probably the more convenient approach.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be possible to extend the functionality of &quot;Connect Server&quot; to do ad hoc mounting of NFS servers; I suggest you raise a wishlist bug on &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;.  It is unlikely to be implemented in the next release (Loki) however.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using the search field if one enters the path to the nfs volume and presses return/enter the nfs directory will mount to /run/user/1000/gvfs/.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="-1" LastEditDate="2017-07-26T13:54:10.707" LastActivityDate="2017-07-26T13:54:10.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4871" PostTypeId="1" CreationDate="2016-03-27T19:27:05.027" Score="2" ViewCount="379" Body="&lt;p&gt;Basically everytime I use USB headset or bluetooth speakers, I have to reinstall Pulseaudio afterwards, otherwise there is no sound. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I don't reinstall, I can get sound back by launching VLC and switching back and fort between bluetooth headset and internal sound in audio settings, but then I have to do it everytime I launch VLC or any other application and its quite annoying, not to say that it causes weird issues on its own, like front speakers of my laptop are not functioning properly, unless the lid is at a certain angle(like almost maxed out angle). You'd think there is an issue with worn out wires from opening or closing the lid, but the issue seems to be totally gone after reinstalling pulseaudio, so go figure..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does this happen like this? What can I do to avoid that?&lt;/p&gt;&#xA;" OwnerUserId="4601" LastEditorUserId="3757" LastEditDate="2016-05-04T10:18:24.980" LastActivityDate="2016-09-01T14:16:44.943" Title="Sound problems after connecting USB or bluetooth headset" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4872" PostTypeId="1" CreationDate="2016-03-27T20:18:20.943" Score="-1" ViewCount="29" Body="&lt;p&gt;Since attempting to install Steam and receiving the error message that there are apparently &quot;held packages&quot; on my system, I attempted to start my computer today and it repeatedly fails to load the OS. I also cannot boot to other media such as a CD/DVD or USB drive. I am stuck with a console interface of the operating system and I don't know how to get my main graphical interface back. &lt;/p&gt;&#xA;" OwnerUserId="4440" LastActivityDate="2016-04-27T05:56:00.483" Title="Critical System Issue" Tags="|graphic-drivers|pantheon-terminal|shell|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4874" PostTypeId="2" ParentId="2836" CreationDate="2016-03-28T02:59:44.397" Score="-1" Body="&lt;p&gt;There are 4 suspending modes i am aware off that you can select in the BIOS/UEFI (S1-S4).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface#OSPM_responsibilities&quot; rel=&quot;nofollow&quot;&gt;https://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface#OSPM_responsibilities&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure you select the one you need. &lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-28T02:59:44.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4875" PostTypeId="2" ParentId="4871" CreationDate="2016-03-28T03:05:28.947" Score="1" Body="&lt;p&gt;My theory that happens because pulseaudio receives certain signals from your laptop like &quot;lid is closed, my owner is not listening to me, shut up now.&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to configure pulseaudio's volumes over &lt;code&gt;pavucontrol&lt;/code&gt;. Perhaps the Output gets muted? If you don't have the program yet, install the same named package.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-28T03:05:28.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4876" PostTypeId="1" AcceptedAnswerId="4881" CreationDate="2016-03-28T03:12:25.017" Score="-1" ViewCount="160" Body="&lt;p&gt;Since the day I installed elementary OS, I miss my classic desktop layout (files on your Desktop, not only blank space) and I'd like to reenable it. Does anyone know how to do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This here is probably against elementary OS's, or rather Pantheon DE's , thoughts but I worked with that layout since I started using computers, and I want to keep working with it. If there's no option, this might be an idea for Loki.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="84" LastEditDate="2021-07-10T09:18:16.530" LastActivityDate="2021-07-10T09:18:16.530" Title="Reactivate the Desktop function" Tags="|desktop|pantheon|" AnswerCount="1" CommentCount="0" ClosedDate="2016-03-31T12:12:00.180" ContentLicense="CC BY-SA 3.0" />
  <row Id="4877" PostTypeId="2" ParentId="4872" CreationDate="2016-03-28T03:17:15.353" Score="1" Body="&lt;p&gt;You messed up some dependencies by holding packages .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I know that libstdc++ issue with steam and that there's a solution where you actually have to hold-mark certain packages, but you can definately fry your system with that. Also, you only have to delete a few library files in the steam folder to get it running, and if you ask a new quesion, I'm pleased to go more detailed about this.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And you most likely uninstalled X and pantheon, the desktop environment of elementary OS. That way you will always see the command prompt when booting, since you deleted everything else. ;)&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-28T03:17:15.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4878" PostTypeId="2" ParentId="4869" CreationDate="2016-03-28T03:25:25.337" Score="0" Body="&lt;p&gt;Weird, read only?&#xA;That would require an read/write remount:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -o remount,rw /dev/&amp;lt;your parition identifier&amp;gt; /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can find your parition identifier by using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -v | grep &quot;^/&quot; | awk '{print &quot;\nPartition identifier: &quot; $1  &quot;\n Mountpoint: &quot;  $3}'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;exactly as SirCharlo wrote here: &lt;a href=&quot;https://askubuntu.com/questions/175739/how-do-i-remount-a-filesystem-as-read-write&quot;&gt;https://askubuntu.com/questions/175739/how-do-i-remount-a-filesystem-as-read-write&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-03-28T03:25:25.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4879" PostTypeId="1" AcceptedAnswerId="4903" CreationDate="2016-03-28T07:00:35.180" Score="8" ViewCount="4913" Body="&lt;p&gt;Is it possible (and recommended) to install KDE as second desktop environment on Freya? I want to test it, but don't want to reinstall everything.&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2017-12-12T20:52:44.893" Title="Test KDE on elementary?" Tags="|window-manager|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4880" PostTypeId="2" ParentId="4879" CreationDate="2016-03-28T10:02:09.793" Score="2" Body="&lt;p&gt;It &lt;em&gt;should be&lt;/em&gt; possible (haven't tested it personally) since Pantheon and KDE don't actually share a lot of packages. I don't think you'll run into issues into which you would run into if you're running Pantheon and GNOME (they share a lot of packages, but not the same versions of the packages).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it recommended? No. Testing any other desktop environment defeats the whole purpose of using elementary OS. Also, you might not get the support you're looking for if you do this since you're kind of &quot;powerusing&quot; elementary OS by doing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're in for a ride, try searching for how to install KDE in Ubuntu 14.04 and follow the instructions. Note that it's crucial that you search for &lt;em&gt;14.04-specific&lt;/em&gt; instructions.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2016-03-28T10:02:09.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4881" PostTypeId="2" ParentId="4876" CreationDate="2016-03-28T10:35:38.770" Score="1" Body="&lt;p&gt;this solution here worked very well for me on first try: &lt;a href=&quot;http://mylinuxideas.blogspot.de/2015/04/enable-desktop-icons-and-right-click-on.html&quot; rel=&quot;nofollow&quot;&gt;http://mylinuxideas.blogspot.de/2015/04/enable-desktop-icons-and-right-click-on.html&lt;/a&gt; (I was setting up a skylake intel NUC i3 with elementary and OSX Yosemite theme for my wife to make the transition from a mac as easy as possible for her. BTW: I LOVE this little setup with elementary! Works like a charm.)&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-03-28T10:35:38.770" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4882" PostTypeId="2" ParentId="4812" CreationDate="2016-03-28T12:57:17.890" Score="1" Body="&lt;p&gt;Run &lt;code&gt;gsettings reset-recursively org.gnome.system.proxy&lt;/code&gt; in terminal the command will reset proxy settings.&lt;/p&gt;&#xA;" OwnerUserId="4605" LastEditorUserId="3757" LastEditDate="2016-03-28T13:50:53.137" LastActivityDate="2016-03-28T13:50:53.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4883" PostTypeId="1" AcceptedAnswerId="4919" CreationDate="2016-03-28T13:12:41.110" Score="0" ViewCount="261" Body="&lt;p&gt;This is the same laptop I previously asked questions about.So today I decided to install elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First I installed elementary to USB using Rufus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then booted it from Windows Startup Menu and created the following partitions using GParted&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/dev/sda6 - root ext4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/dev/sda7 - Linux swap&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Ran &lt;code&gt;ubiquity -b&lt;/code&gt; and installed elementary to sda6&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Downloaded and extracted SHIM 0.2 to &lt;code&gt;/boot/efi/EFI/refind&lt;/code&gt; and also installed rEFInd using the &lt;code&gt;--shim /boot/efi/EFI/rEFInd/SHIM.efi&lt;/code&gt; and changed the rEFInd resolution to 1600 900 and enabled graphical boot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copied vmlinuz and initrd from sda6 to &lt;code&gt;/boot/efi/EFI/ubuntu&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Rebooted and used F9 to select &lt;code&gt;shim.efi&lt;/code&gt; and selected the correct certificate.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;elementary OS shows as Ubuntu but does not boot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Disabled secure boot and booted elementary (shows as Ubuntu).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I get a BusyBox shell and when I use RESUIB I get.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1wSnu.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1wSnu.jpg&quot; alt=&quot;laptop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;❤ elementary OS but can't get it to work on my laptop.I have elementary on another laptop and it is very nice&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-03-29T01:08:53.393" LastActivityDate="2016-04-04T02:08:10.337" Title="Cannot run elementary OS using rEFInd on HP Pavilion g7 2269wm" Tags="|uefi|refind|amd|hp|radeon|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4884" PostTypeId="1" AcceptedAnswerId="4950" CreationDate="2016-03-28T16:38:17.010" Score="2" ViewCount="942" Body="&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;N&lt;/kbd&gt; will create a new folder. I would like to use a different (2-key) shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can use custom shortcuts, but what is the &lt;strong&gt;command&lt;/strong&gt; to create a new folder?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-04-22T13:02:04.890" LastActivityDate="2016-04-22T13:02:04.890" Title="What is the command behind the option/shortcut to create new folder in Pantheon Files?" Tags="|pantheon-files|keyboard-shortcuts|folder|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4885" PostTypeId="1" CreationDate="2016-03-28T18:15:50.833" Score="3" ViewCount="2394" Body="&lt;p&gt;I can't seem to find any option to mark an email message as spam in Geary. Can anyone explain how to manage junk/spam messages with Geary? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3753" LastActivityDate="2018-07-30T20:06:40.020" Title="Is it possible to manage spam/junk messages with Geary?" Tags="|pantheon-mail|" AnswerCount="4" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4886" PostTypeId="2" ParentId="4879" CreationDate="2016-03-28T20:43:56.123" Score="2" Body="&lt;p&gt;Installing KDE might cause Elementary OS to behave unexpectedly. In addition, the Elementary apps weren't designed for KDE, so you won't get the &quot;full&quot; KDE experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like to try KDE, I'd recommend downloading copy of &lt;a href=&quot;http://www.kubuntu.org/&quot; rel=&quot;nofollow&quot;&gt;Kubuntu&lt;/a&gt; and either booting it from a USB drive or running it inside a virtual machine such as VirtualBox.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-28T20:43:56.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4888" PostTypeId="1" CreationDate="2016-03-28T21:47:37.183" Score="4" ViewCount="845" Body="&lt;p&gt;I have a problem with switching elementaryOS Freya layout. Shortcut is default (Alt+Space), but when you press it - it opens menu window instead of changing layout. I though a good solution would be to change keyboard layout, however that does not seem an easy task. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried looking into System settings &gt; Keyboard &gt; Universal access - however there is no Next layout line.&#xA;I tried seeting it manually with commands like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['Caps_Lock']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Responds with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No such key 'switch-input-source'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In dconf - after you navigate to gala.keybindings - there is no line for layouts whatsoever. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideas where to continue? Thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: it is a deal breaker for me since it really plunges my productivity (laptop does not have numpad and I am frequently change layouts)&lt;/p&gt;&#xA;" OwnerUserId="4613" LastEditorUserId="4613" LastEditDate="2016-03-31T20:20:18.807" LastActivityDate="2016-07-18T22:32:10.133" Title="Cannot change keyboard layout with keyboard shortcut" Tags="|release-freya|keyboard|keyboard-shortcuts|keyboard-layout|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4889" PostTypeId="2" ParentId="4865" CreationDate="2016-03-28T22:00:40.750" Score="2" Body="&lt;p&gt;You're trying to build &lt;strong&gt;pantheon-mail&lt;/strong&gt; with dependencies on &lt;strong&gt;libgranite&lt;/strong&gt; over Freya 0.3. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This library version don't support &quot;&lt;em&gt;Granite.Widgets.Avatar&lt;/em&gt;&quot;, which it's incluided in &lt;strong&gt;libgranite&lt;/strong&gt; for 0.4. You must upgrade it to this version before build &lt;strong&gt;pantheon-mail&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info:  &lt;a href=&quot;https://code.launchpad.net/granite&quot; rel=&quot;nofollow&quot;&gt;Granite on Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to update the following libraries in order to satisfy all &lt;strong&gt;pantheon-mail&lt;/strong&gt; dependencies:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;em&gt;libcairo2&lt;/em&gt; (&gt;= 1.2.4)&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;libgee-0.8-2&lt;/em&gt; (&gt;= 0.14.0)&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;libgranite3&lt;/em&gt; (&gt;= 0.3.1+r930+pkg83~daily~ubuntu0.4.1)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All others necessary libraries are already in Freya. These changes are needed to the latest version of &lt;strong&gt;pantheon-mail&lt;/strong&gt; &lt;em&gt;(pantheon-mail - 1.0.0+r2030+pkg7~daily~ubuntu0.4.1)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must keep in mind that &lt;strong&gt;pantheon-mail&lt;/strong&gt;, and &lt;strong&gt;libgranite&lt;/strong&gt; for Loki 0.4, are under development. So you can find some aditional issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info : &lt;a href=&quot;https://launchpad.net/pantheon-mail&quot; rel=&quot;nofollow&quot;&gt;Mail in Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPA DAILY VERSION&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can get &lt;strong&gt;pantheon-mail&lt;/strong&gt; running on Freya (aka &lt;strong&gt;Mail&lt;/strong&gt;) from the daily elementary OS PPA. Open terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get install pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before running, you must remove &lt;strong&gt;Geary&lt;/strong&gt; from your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove geary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, remove daily ppa to prevent your system become unstable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;em&gt;P.S.- It is important that during this process not perform a system upgrade or dist-upgrade&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-04-01T17:46:35.097" LastActivityDate="2016-04-01T17:46:35.097" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="4893" PostTypeId="1" AcceptedAnswerId="4895" CreationDate="2016-03-29T05:45:32.550" Score="1" ViewCount="157" Body="&lt;p&gt;My laptop does not boot Freya.So I think that I should upgrade my kernel to 4.4.But the system is unbootable and gives a error and does not show the GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how could I do this when it doesn't boot&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-03-29T08:02:15.187" Title="How to install the 4.4 kernel on a unbootable system" Tags="|boot|kernel|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4894" PostTypeId="1" CreationDate="2016-03-29T07:41:11.030" Score="1" ViewCount="1521" Body="&lt;p&gt;I currently have Windows 10 on my ssd and I shrunk my C partition, created ElementaryOS usb, booted through usb and elementary OS isn't giving me to install it as a dual boot. It says &quot;no detected operating system&quot; and the other option is to &quot;do something else&quot; which I'm not completely confident in. I searched around and many people recommended using fixparts in Try-mode but fixparts is giving back some grim looking errors. If I run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo fixparts /dev/sda&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It says &lt;code&gt;Warning: 0xEE partition doesn't start on sector 1. This can cause problems in some OSes.&lt;/code&gt; After I inputted &quot;W&quot; for the command that was suggested and I get &quot;Final checks complete. About to write MBR data. THIS WILL OVERWRITE EXISTING PARTITIONS!!&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I be worried at all about the errors? I stopped myself from going forward and cancelled the command because I felt like it would destroy my Windows 10 partition and everything would go to hell. I can provide as much information as possible if it can lead to some solution. I installed ElementaryOS on my laptop in a breeze choosing the &quot;Install alongside them&quot; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run &lt;code&gt;sudo parted /dev/sda print&lt;/code&gt; I get back&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;1 1049kb 525MB 524MB primary ntfs boot       &lt;/li&gt;&#xA;&lt;li&gt;2 525MB 323GB 322GB primary ntfs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;When I shrunk the partition, I remember shrinking it from roughly 450GB to 300GB somewhere around there. I hope the information helps in looking at my problem. Thanks so much in advance.&lt;/p&gt;&#xA;" OwnerUserId="4616" LastEditorUserId="3757" LastEditDate="2016-04-04T02:06:14.153" LastActivityDate="2016-09-01T04:12:53.477" Title="elementary OS not detecting my OS (Windows 10)" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4895" PostTypeId="2" ParentId="4893" CreationDate="2016-03-29T08:02:15.187" Score="1" Body="&lt;p&gt;You can boot into a Flash Drive with elementary OS and chroot into your machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First get root with &lt;code&gt;sudo su&lt;/code&gt;, and create some directory using &lt;code&gt;mkdir /mnt/mainOS&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then just mount your HDD with the &lt;code&gt;mount /dev/&amp;lt;your id&amp;gt; /mnt/mainOS&lt;/code&gt; command and &lt;code&gt;chroot /mnt/mainOS /bin/bash -i&lt;/code&gt; into it. Your bash will now behave like you would be in your normal machine. Upgrade the kernel as usual, !&lt;code&gt;exit&lt;/code&gt;! and &lt;code&gt;reboot&lt;/code&gt; should then do the rest. ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Tips&lt;/strong&gt;: You can detect your drives with &lt;code&gt;df -h&lt;/code&gt;.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;You can find more in-depth information about chroot here: &lt;a href=&quot;https://wiki.ubuntuusers.de/chroot/&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntuusers.de/chroot/&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-29T08:02:15.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4896" PostTypeId="2" ParentId="4885" CreationDate="2016-03-29T08:04:21.233" Score="1" Body="&lt;p&gt;Unfortunately, not possible via client side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A spam filter only work server sided with geary.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-29T08:04:21.233" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4897" PostTypeId="1" AcceptedAnswerId="4942" CreationDate="2016-03-29T11:42:30.040" Score="0" ViewCount="759" Body="&lt;p&gt;My touchpad has mysteriously stopped working after I upgraded my kernel, despite having now downgraded my kernel and even tried to restore a previous snapshot using Timeshift.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have one of the new &lt;a href=&quot;https://puri.sm/librem-13/&quot; rel=&quot;nofollow&quot;&gt;Purism Librem 13&lt;/a&gt; laptops.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I upgraded the kernel because I realised that bluetooth didn't seem to be working (the whole panel was greyed out when selected in System Settings). I had previously upgraded my kernel to 4.1.20 because the touchpad was only detected as a mouse on 3.19 and ignored all settings (enabling/disabling &quot;Tap to click&quot; etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in an effort to fix the bluetooth I tried a few kernel upgrades (going as high as 4.5). At some point the touchpad just totally stopped responding. So I tried downgrading and even restoring a Timeshift snapshot but nothing seems to fix it. Also bizarrely, the System Settings seem to be out of sync with the kernel. Previously on 4.1.20, the option for &quot;Two finger scroll&quot; was greyed out, but now it remains selectable right down to 3.19 (not that it does anything).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried the suggestions on a number of sites. If I type &lt;code&gt;xinput list&lt;/code&gt; I get this, so the touchpad is apparently recognised (I'm also currently using an old USB mouse):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Virtual core pointer                        id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ ImPS/2 BYD TouchPad                       id=13   [slave  pointer  (2)]&#xA;⎜   ↳ Logitech USB-PS/2 Optical Mouse           id=10   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=9    [slave  keyboard (3)]&#xA;    ↳ USB 2.0 Camera                            id=11   [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=12   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Someone has also created a &lt;a href=&quot;https://github.com/kylerankin/psmouse-byd-dkms&quot; rel=&quot;nofollow&quot;&gt;very handy dkms package&lt;/a&gt; for Purism's driver for this touchpad. With or without that installed, the touchpad was working fine before my kernel fiddling. :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried a number of other suggestions like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r psmouse&#xA;sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would really appreciate any ideas anyone has here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Incidentally, as a new convert to Linux and Elementary OS, I just want to say I love this distro!&lt;/p&gt;&#xA;" OwnerUserId="4566" LastActivityDate="2016-04-01T12:33:23.560" Title="Touchpad has stopped working after kernel upgrade" Tags="|kernel|touchpad|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4898" PostTypeId="1" CreationDate="2016-03-29T16:10:07.980" Score="0" ViewCount="1995" Body="&lt;p&gt;I try to lock my CPU to a specific clock frequency (1.2 GHz). &#xA;Using Ubuntu (14 or 15), it works perfectly by editing the &lt;code&gt;/sys/devices/system/cpu0/cpufreq/scaling_max_freq&lt;/code&gt; with the specific Hz-value (e.g. 1200000). And the same for cpu1, cpu2, cpu3, cpu4. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, for some reason, elementary OS ignores the settings made within the files and puts them back to stock after a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also frequency-settings made with the tool TLP aren't recognized by elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using an Lenovo Thinkpad T430s with a Intel Core i5-3320M (with Intel pstate driver).&lt;/p&gt;&#xA;" OwnerUserId="4617" LastEditorUserId="3757" LastEditDate="2016-03-30T01:20:23.690" LastActivityDate="2016-04-04T23:42:50.067" Title="No way to lock the CPU-frequency to a specific value" Tags="|cpu|clock|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="4899" PostTypeId="1" AcceptedAnswerId="4902" CreationDate="2016-03-29T17:51:31.077" Score="2" ViewCount="163" Body="&lt;p&gt;After i type sudo apt-get update ubuntu shows the following error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: Failed to fetch &lt;a href=&quot;http://archive.canonical.com/dists/freya/partner/binary-amd64/Packages&quot; rel=&quot;nofollow&quot;&gt;http://archive.canonical.com/dists/freya/partner/binary-amd64/Packages&lt;/a&gt;  404  Not Found [IP: 91.189.92.150 80]&#xA;W: Failed to fetch &lt;a href=&quot;http://linux.dropbox.com/ubuntu/dists/freya/main/binary-i386/Packages&quot; rel=&quot;nofollow&quot;&gt;http://linux.dropbox.com/ubuntu/dists/freya/main/binary-i386/Packages&lt;/a&gt;  404  Not Found [IP: 108.160.172.206 80]&lt;/p&gt;&#xA;" OwnerUserId="4621" LastActivityDate="2016-08-26T23:55:04.880" Title="Mine apt-get update gives an error?" Tags="|system|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4900" PostTypeId="1" AcceptedAnswerId="4908" CreationDate="2016-03-29T18:46:30.370" Score="3" ViewCount="419" Body="&lt;p&gt;It's been about 5 years since I've used an Ubuntu based distro as my daily driver and now I'm starting remember some of the reasons why I ditched it for Arch Linux; horribly out of date software packages in the Ubuntu repositories being one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example I just went to install Ansible today via apt-get and it was version 1.54...whaaaaat....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Checking the Ansible docs I can add the ppa:ansible/ansible repo, but is the only solution to manually add a zillion custom ppa's everytime I want to get current software? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know of a tool that will automatically check for a current ppa for an application before it installs some ancient release found in the stock Ubuntu repository?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-04-06T14:10:15.917" LastActivityDate="2016-04-06T14:10:15.917" Title="Strategies for dealing with horribly out of date software in the Ubuntu repos" Tags="|apt|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4901" PostTypeId="2" ParentId="4793" CreationDate="2016-03-29T19:02:01.633" Score="-1" Body="&lt;p&gt;The issue was my USB stick, changing to a cheap 5 USD one made the install go really smooth.&lt;/p&gt;&#xA;" OwnerUserId="4532" LastActivityDate="2016-03-29T19:02:01.633" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4902" PostTypeId="2" ParentId="4899" CreationDate="2016-03-29T21:38:39.503" Score="2" Body="&lt;p&gt;All repositories to software runnning over Ubuntu are based on the name of Ubuntu releases. There isn't a release called &lt;em&gt;Freya&lt;/em&gt; for Ubuntu. That's the name of a elementary OS release. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must change your source.list.  See the next Q&amp;amp;A to change it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/4282/565&quot;&gt;update - Missing index files from elementary repo&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-03-29T21:38:39.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4903" PostTypeId="2" ParentId="4879" CreationDate="2016-03-29T22:19:51.667" Score="8" Body="&lt;p&gt;&lt;strong&gt;About testing one desktop environment (DE) along another.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will &lt;strong&gt;not&lt;/strong&gt; give you a real experience of any of them. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some DE are related to each other and may work together better than others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a general idea there is the Gnome-GTK family and the Qt-KDE family of DE. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;KDE is one of its kind and I would not mix it with others. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But elementary OS-Pantheon, although GTK-based and Gnome-related, has become so specialized and special that I would never think installing a different DE on top of &lt;strong&gt;that&lt;/strong&gt;. And even less would I install KDE, which is in itself so different.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;About testing a desktop environment by itself.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even installing a secondary DE and removing the first is a worst idea than installing in the first place &lt;strong&gt;an operating system having as default the very DE that you want to test&lt;/strong&gt;. A default DE is already streamlined, adjusted, better put together, harmonized, complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to test Pantheon, install elementary OS. If you want Unity, try Ubuntu. If you want &lt;strong&gt;to test KDE, try Kubuntu, Manjaro KDE, or even better Linux Mint KDE&lt;/strong&gt; (my favorite KDE, considering what I said above).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;About testing a different DE when I want to keep elementary OS.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are a few options for testing a new OS or DE without touching your main elementary OS installation:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Use a virtual environment, through VirtualBox or VMWare inside elementary OS (as mentioned by a previous answer). CPU and RAM power is needed for comfortable use. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For the short term: make a live USB of the testing system and boot from that. Download the ISO and use a tool like &lt;a href=&quot;https://unix.stackexchange.com/a/172478/32012&quot;&gt;Mintstick&lt;/a&gt; or &lt;a href=&quot;https://unetbootin.github.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;UNetbootin&lt;/a&gt;. That USB can also be 'persistent' to remember changes made to the system. (After a while such persistent live installations may become instable, but they can work fine for enough time to satisfy your testing goals.  A good tool that I tried for that is &lt;a href=&quot;http://www.linuxliveusb.com/en/download&quot; rel=&quot;nofollow noreferrer&quot;&gt;LiLi&lt;/a&gt; in Windows.) -- It is a very good idea for any Linux user to have a few OSes at hand on live USB sticks for testing and emergency purposes.-- &lt;strong&gt;A live environment on USB (or even CD) is the ideal environment for testing&lt;/strong&gt; in the sense of just taking a look at a system or desktop, especially for assessing the compatibility with your hardware.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For the long term:  do &lt;strong&gt;a separate installation on a new partition&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;A separate partition of about 20-30 GB  can be created for the tested OS/DE. That's what I do, and that means using a multiple boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I find more easy to &quot;test&quot; a new Linux or desktop in this way than installing a DE on top of my favorite OS because I find it easier to get rid of it if I don't like it by formating the partition altogether than by removing the dependencies installed with the second DE. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using &lt;a href=&quot;https://www.howtoforge.com/partitioning_with_gparted&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gparted from a live USB to shrink an old partition and than create a new one&lt;/a&gt; is not very difficult, but be sure you know what you do when you do that, and back-up your important data from your machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, keep in mind that removing the partition of the last installed Linux will normally remove the boot menu, which can be restored with a live USB using &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-Repair&lt;/a&gt;. - On that, take a look &lt;a href=&quot;https://unix.stackexchange.com/a/273083/32012&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All this may seem tricky and indeed it needs some experience (which may come by small catastrophic occurrences :) but on the whole this will represent a much better and sane Linux experience than mixing elementary OS and KDE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(If you select the new-separate-partition solution and need help, create a specific question on &lt;a href=&quot;https://unix.stackexchange.com/&quot;&gt;U&amp;amp;L&lt;/a&gt;, post the link under here and I will gladly try to give you a detailed answer.)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-04-13T13:10:17.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4904" PostTypeId="2" ParentId="4483" CreationDate="2016-03-30T02:12:18.293" Score="3" Body="&lt;p&gt;It's not possible to disable compositing in elementary OS. If you feel like you need to disable compositing, your computer is probably much too old to be running elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disabling animations could have some impact on performance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can disable window animations under System Settings &gt; Universal Access &gt; General. This includes the animations for opening, close, and resizing windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can disable in-app animations through &lt;code&gt;gsettings&lt;/code&gt; with the Terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface enable-animations false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can re-enable in-app animations by setting the key to &lt;code&gt;true&lt;/code&gt; instead of &lt;code&gt;false&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface enable-animations true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Bear in mind that in-app animations are not exposed in System Settings because it may cause undesirable behavior. Proceed at your own risk. Your mileage may vary.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2017-02-22T18:38:27.480" LastActivityDate="2017-02-22T18:38:27.480" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4905" PostTypeId="2" ParentId="4897" CreationDate="2016-03-30T05:08:26.887" Score="0" Body="&lt;p&gt;Try &lt;code&gt;dkms autoinstall&lt;/code&gt;, that will rebuild the modules for your new kernel and may help.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-30T05:08:26.887" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4906" PostTypeId="2" ParentId="4483" CreationDate="2016-03-30T05:48:24.663" Score="1" Body="&lt;p&gt;If you still want to use elementary but don't want to use gala (the window manager), you could install a lightweight window manager such as openbox or metacity, and manually run it (using &lt;code&gt;--replace&lt;/code&gt; to ensure it replaces gala).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, without compositing, Plank will not display correctly (not a show stopper, but probably not what you want).&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-03-30T05:48:24.663" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4907" PostTypeId="2" ParentId="4015" CreationDate="2016-03-30T11:49:03.400" Score="1" Body="&lt;p&gt;I run a NUC6i3SYK (Skylake Core i3-6100U)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS Freya (Ubuntu 14.04.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After trying several other Kernels I now successfully run the 4.2.8 Kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below kernel 4.x (3.19 is now the stock Freya/  Ubuntu 14.04 Kernel I think) I don't have Wifi and I see quite the CPU load even in idle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On kernels 4.3.x - 4.5 I do have Wifi but terrible ripping graphics glitches and interruptions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kernel 4.2.8 runs perfectly fine for me, including WiFi and smooth graphics, While typing this on Firefox I have a CPU load of 1-2% and a 34°C cpu temp.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note: To get hardware graphics acceleration you need to add &quot;i915.preliminary_hw_support=1&quot; to Grub kernel parameters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Easiest way to do is with Grub Customizer. My kernel parameters are now:&quot;i915.preliminary_hw_support=1 quiet splash&quot;.&#xA;Then save in Grub Customizer and to make sure it is really really saved you should finish with &quot;sudo update-grub&quot; in terminal and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So yes, in my case Freya with Kernel 4.2.8 &quot;supports&quot; a Skylake CPU (6100U) perfectly fine.&lt;/p&gt;&#xA;" OwnerUserId="4584" LastEditorUserId="4584" LastEditDate="2016-03-30T11:54:06.613" LastActivityDate="2016-03-30T11:54:06.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4908" PostTypeId="2" ParentId="4900" CreationDate="2016-03-30T13:16:59.657" Score="1" Body="&lt;p&gt;Maybe, this tool could help you : &lt;a href=&quot;http://www.webupd8.org/2016/03/y-ppa-manager-updated-with-important.html&quot; rel=&quot;nofollow&quot;&gt;Y-PPA Manager&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you'll have first to search with this tool by yourself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nikos&lt;/p&gt;&#xA;" OwnerUserId="443" LastActivityDate="2016-03-30T13:16:59.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4909" PostTypeId="2" ParentId="4898" CreationDate="2016-03-30T15:16:09.210" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-tools-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then you can either &lt;strong&gt;force&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cpupower frequency-set -f clock_freq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;set max&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cpupower frequency-set -u clock_freq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;or set min&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cpupower frequency-set -d clock_freq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;cpu clock frequency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More in-depth information about cpupower can be found here: &lt;a href=&quot;https://wiki.archlinux.org/index.php/CPU_frequency_scaling&quot; rel=&quot;nofollow&quot;&gt;https://wiki.archlinux.org/index.php/CPU_frequency_scaling&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may also have to install additional kernel related packages since cpupower is only installed automatically in 3.4 and above.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="4531" LastEditDate="2016-03-31T13:42:40.977" LastActivityDate="2016-03-31T13:42:40.977" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="4912" PostTypeId="2" ParentId="1795" CreationDate="2016-03-30T18:00:24.770" Score="-1" Body="&lt;p&gt;I have installed Chromium and have not that problems. Chromium shut downs with Ctrl-Shift-q  Is very practice. Firefox only with Ctrl-q  like mostly apps in elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="4602" LastEditorUserId="4602" LastEditDate="2016-04-02T01:39:07.170" LastActivityDate="2016-04-02T01:39:07.170" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4915" PostTypeId="2" ParentId="1795" CreationDate="2016-03-30T19:40:25.283" Score="0" Body="&lt;p&gt;The behavior you're seeing is probably due to &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1355711&quot; rel=&quot;nofollow&quot;&gt;this bug&lt;/a&gt;. As a workaround, I've been closing my browser before I log out.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-30T19:40:25.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4916" PostTypeId="2" ParentId="4885" CreationDate="2016-03-30T21:10:42.803" Score="2" Body="&lt;p&gt;Geary doesn't offer this feature, but both Yahoo and Zoho provide spam filtering on the server side. If these filters aren't catching everything, you can &quot;train&quot; them by dragging spam messages into the Junk folder. You can do this from Geary or any other email client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The good thing about server-based filters is that they'll run even if your Elementary OS machine is off and you're accessing your email from your phone or the web.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://antispam.yahoo.com/&quot; rel=&quot;nofollow&quot;&gt;https://antispam.yahoo.com/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.zoho.com/mail/help/anti-spam.html&quot; rel=&quot;nofollow&quot;&gt;https://www.zoho.com/mail/help/anti-spam.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-03-30T21:10:42.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4917" PostTypeId="2" ParentId="4885" CreationDate="2016-03-31T00:12:00.563" Score="0" Body="&lt;p&gt;I was thinking a bit. It IS possible to use client sided spam filters with geary by hosting a mail server on your pc that's configured to download the mails and then runs spamassassin. I'm sorry that I can't exactly tell you how it's done, but I'm sure there are How-To's out there. However, Ryans answer is way more practical and your pc wouldn't need to download (probably infected) mails first. Also it would only work on your pc, but not your phone etc.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-31T00:12:00.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4919" PostTypeId="2" ParentId="4883" CreationDate="2016-03-31T03:31:34.633" Score="0" Body="&lt;p&gt;I installed elementary OS using GRUB2 EFI bootloader and now it boots using GRUB2.But now when I boot GRUB2 from rEFInd after I select elementary OS it stays on a black screen for a few seconds (this happens normally) and after that it turns off.When booting from GRUB2 the screen is off until I put the laptop to sleep and turn it back on the screen is on.I could fix the screen not being on by installing &lt;code&gt;fglrx&lt;/code&gt; from additional drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secure boot is &lt;strong&gt;ON&lt;/strong&gt; now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I still can't boot it from rEFInd. Haven't yet tried disabling secure boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT : elementary OS does not shutdown with secure boot &lt;strong&gt;OFF&lt;/strong&gt; but boots to black screen (sound works) and requires me to put the laptop to sleep and turn in it again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am now going to try installing &lt;code&gt;flgrx&lt;/code&gt; for kernel 4.4&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-04T02:08:10.337" LastActivityDate="2016-04-04T02:08:10.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4920" PostTypeId="1" CreationDate="2016-03-31T12:58:56.400" Score="2" ViewCount="1689" Body="&lt;p&gt;My kernel updated recently and since then I get the following error when attempting to start my Windows 10 VM:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Kernel driver not installed (rc=-1908)The VirtualBox Linux kernel driver (vboxdrv) &#xA;is either not loaded or there is a permission problem with /dev/vboxdrv. &#xA;Please reinstall the kernel module by executing  '/etc/init.d/vboxdrv setup'as root. &#xA;If it is available in your distribution, you should install the DKMS package first. &#xA;This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.&#xA;&#xA;where: suplibOsInit&#xA;what:  3&#xA;VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have scoured the internet trying to find a solution to the problem but nothing seems to work. Almost all of the solution suggest installing DKMS, this had no effect for me. Others suggest reinstalling DKMS, installing all of these packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-generic linux-image-generic linux-headers-generic linux-signed-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then reinstalling Virtualbox. I tried installing the above and was terrified when I saw different kernel modules being downloaded. &quot;Luckily&quot; they all failed to install and my system is still stable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the 3.16.0-67-generic kernel on elementary OS 0.3.2 Freya 64-bit on a Dell Latitude E7240.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really need to use the VM, if anyone can help that would be great!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/init.d/vboxdrv setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Produces:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: /etc/init.d/vboxdrv: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dkms autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Produces:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Kernel preparation unnecessary for this kernel.  Skipping...&#xA;&#xA;Kernel preparation unnecessary for this kernel.  Skipping...&#xA;applying patch 0001-MODULE_LICENSE.patch...patching file src/wl/sys/wl_linux.c&#xA;Hunk #1 succeeded at 156 (offset -3 lines).&#xA;&#xA;applying patch 0002-Makefile.patch...patching file Makefile&#xA;Hunk #1 succeeded at 113 with fuzz 1.&#xA;Hunk #2 succeeded at 132 with fuzz 2 (offset 1 line).&#xA;&#xA;applying patch 0003-Make-up-for-missing-init_MUTEX.patch...patching file src/wl/sys/wl_linux.c&#xA;Hunk #1 succeeded at 111 with fuzz 2 (offset 12 lines).&#xA;&#xA;applying patch 0010-change-the-network-interface-name-from-eth-to-wlan.patch...patching file src/wl/sys/wl_linux.c&#xA;Hunk #1 succeeded at 221 (offset -14 lines).&#xA;&#xA;applying patch 0011-do-not-define-__devinit-as-__init-in-linux-3.8-as-__.patch...patching file src/include/linuxver.h&#xA;&#xA;applying patch 0012-add-support-for-Linux-3.15.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c&#xA;Hunk #1 succeeded at 2071 (offset 230 lines).&#xA;&#xA;applying patch 0013-gcc.patch...patching file Makefile&#xA;&#xA;applying patch 0014-add-support-for-Linux-3.17.patch...patching file src/wl/sys/wl_linux.c&#xA;Hunk #1 succeeded at 1313 (offset -38 lines).&#xA;&#xA;applying patch 0015-add-support-for-Linux-3.18.patch...patching file src/wl/sys/wl_cfg80211_hybrid.c&#xA;&#xA;&#xA;Building module:&#xA;cleaning build area...&#xA;Building module:&#xA;cleaning build area....&#xA;make KERNELRELEASE=3.16.0-67-generic -C /lib/modules/3.16.0-67-generic/build M=/var/lib/dkms/bcmwl/6.30.223.248+bdcom/build....&#xA;make KERNELRELEASE=3.16.0-67-generic -C /lib/modules/3.16.0-67-generic/build M=/var/lib/dkms/virtualbox/4.3.36/build....(bad exit status: 2)&#xA;.(bad exit status: 2)&#xA;ERROR (dkms apport): kernel package linux-headers-3.16.0-67-generic is not supported&#xA;Error! Bad return status for module build on kernel: 3.16.0-67-generic (x86_64)&#xA;Consult /var/lib/dkms/virtualbox/4.3.36/build/make.log for more information.&#xA;ERROR (dkms apport): kernel package linux-headers-3.16.0-67-generic is not supported&#xA;Error! Bad return status for module build on kernel: 3.16.0-67-generic (x86_64)&#xA;Consult /var/lib/dkms/bcmwl/6.30.223.248+bdcom/build/make.log for more information.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3465" LastEditorUserId="3465" LastEditDate="2016-04-02T09:49:51.997" LastActivityDate="2016-09-03T08:59:22.350" Title="Oracle Virtualbox stopped working after kernel upgrade" Tags="|virtualbox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4922" PostTypeId="2" ParentId="4920" CreationDate="2016-03-31T13:46:32.573" Score="-1" Body="&lt;p&gt;Try reinstalling the VirtualBox kernel driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/init.d/vboxdrv setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Yesterday I updated to 4.4 and needed another gcc package to get some of my kernel modules via DKMS working again, a build log from:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dkms autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;would be quite useful if the setup command didn't work.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-03-31T13:46:32.573" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4923" PostTypeId="1" AcceptedAnswerId="4960" CreationDate="2016-03-31T15:29:53.457" Score="1" ViewCount="268" Body="&lt;ul&gt;&#xA;&lt;li&gt;I am not able to add user in System Settings /User Accounts &lt;/li&gt;&#xA;&lt;li&gt;I have tried installing the gnome-system-tools as suggested in the other&#xA;post (linked in the end of this post)&lt;/li&gt;&#xA;&lt;li&gt;I am logged in with my default admin user account&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have unlocked the System Settings/User accounts locker&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can fill all fields out after clicking the + button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After finished no new account is visible in the list, nor on log in screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3227/how-can-i-add-a-new-user-account&quot;&gt;How can I add a new user account?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System information:&#xA;elementary OS 0.3.2 Freya 64-bit MacBook (installed)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best Regards&#xA;M Edvardsen&lt;/p&gt;&#xA;" OwnerUserId="4634" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-03T16:54:16.160" Title="Can't add new user (System is installed, I am not in installation mode)" Tags="|release-freya|settings|user|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4924" PostTypeId="1" AcceptedAnswerId="4929" CreationDate="2016-03-31T16:59:00.763" Score="-2" ViewCount="131" Body="&lt;p&gt;this is my first Linux OS,&#xA;installed alongside windows 10 on my SSD and its fine, though whenever i try to go to displays to edit my resolution and my other monitors ( it just duplicates them at the moment) the app closes and i get a system settings has closed unexpectedly?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I apologize if my info provided is not very detailed if anything else is needed please feel free to say, thank you in advance guys ( this is probably a really basic error aha ) &lt;/p&gt;&#xA;" OwnerUserId="4637" LastEditorUserId="3757" LastEditDate="2016-05-05T14:43:58.970" LastActivityDate="2016-05-05T14:43:58.970" Title="Fresh install - Linux newbie - when i try to open displays in system settings it just closes?" Tags="|release-freya|settings|" AnswerCount="1" CommentCount="1" ClosedDate="2016-04-04T17:10:31.707" ContentLicense="CC BY-SA 3.0" />
  <row Id="4925" PostTypeId="1" CreationDate="2016-03-31T17:40:55.857" Score="2" ViewCount="1084" Body="&lt;p&gt;Yesterday I got a new laptop and today I wanted to install Elementary OS on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my first attempt of installing the OS (version 0.3.2, latest), after the first partitioning (manually, 1 swap partition and 1 root) I got an error of the GRUB:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unable to install GRUB in /dev/sda&#xA;Executing &lt;code&gt;grub-install /dev/sda&lt;/code&gt; failed.&#xA;This is a fatal error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't fix this error so I decided to partitionate the disk in a different way. I chose the installation option &quot;Erase disk and install Elementary OS&quot;. The installation began and just when GRUB installation was about to begin the screensaver turned on I suppose (the screen of my laptop turned off), then I moved the mouse, the screen turned on but in black and just showing the mouse pointer. I turned off the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried to partitionate again manually, I clicked on create a new partition table and in the process my laptop &quot;froze&quot;. I turned off again and here came the problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, my hard disk wasn't recognized in the BIOS. However, in &quot;Try Elementary OS&quot; I executed GParted and saw that the hard drive was recognized, but I also got this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;/dev/sda contains GPT signatures indicating that it has a GPT table, however...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;The backup GPT table is corrupt, but the primary appears OK, so that will be used.&quot; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After trying to fix it with GParted, I used gdisks and fixparts. I created a new partition table. Then I rebooted and luckily the hard drive was recognized again in the BIOS. However GParted still gave me the same error. I tried again to install Elementary OS choosing the installation option &quot;Erase disk and install Elementary OS&quot; again, with logical volume management checked. Finally it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;QUESTIONS:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the installation if I execute GParted from the hard drive OS it gives no error, but if I execute it from the USB (&quot;Try Elementary OS&quot;) it still gives me the same error. Is this error important? Is the hard disk working properly?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My partition table looks like this: (image)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't see a swap partition, is it included in the elementaryos logical partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The GRUB menu doesn't show in the startup. Is this OK? (I have only Elementary OS installed with a non UEFI installation.)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This is the image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jMgoU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jMgoU.png&quot; alt=&quot;Partitions&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;" OwnerUserId="4638" LastEditorUserId="242" LastEditDate="2016-04-04T03:43:34.770" LastActivityDate="2017-10-28T17:46:19.687" Title="Errors during installation" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2019-10-22T05:35:45.327" ContentLicense="CC BY-SA 3.0" />
  <row Id="4927" PostTypeId="1" CreationDate="2016-03-31T17:57:53.360" Score="1" ViewCount="323" Body="&lt;p&gt;I'm using elementary os with a dual display setup. Following is the arrangement. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/IsVBe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IsVBe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Let's say there's a Firefox window opened in the bottom screen. Then we click on some link and another Firefox window pops up. It's supposed to pop in the same screen where I click the link and where the Firefox window originally is. But instead it appears in the upper display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to fix this. This is really annoying. I'm doing web application development and I have my IDE opened in the upper display and browser windows supposed be in the bottom window. It's easy when do debugging. But because of this issue it simply is not posible. &lt;/p&gt;&#xA;" OwnerUserId="4221" LastActivityDate="2016-08-30T13:39:04.477" Title="Additional windows of an application open in wrong display" Tags="|display|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4928" PostTypeId="2" ParentId="4168" CreationDate="2016-03-31T18:05:04.340" Score="0" Body="&lt;p&gt;You need to customize your bash prompt by editing PS1 variable.&#xA;&lt;a href=&quot;https://bash.cyberciti.biz/guide/Changing_bash_prompt&quot; rel=&quot;nofollow&quot;&gt;Follow this link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THis is how mine looks like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Thu Mar 31 02:04 PM asiri:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Releated ps1 is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PS1='${debian_chroot:+($debian_chroot)}\d \@ \u:\W\$ '&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4221" LastActivityDate="2016-03-31T18:05:04.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4929" PostTypeId="2" ParentId="4924" CreationDate="2016-03-31T18:30:42.483" Score="0" Body="&lt;p&gt;fixed sorry! reinstalled switchboard and rebooted and it seemed to be fixed&lt;/p&gt;&#xA;" OwnerUserId="4637" LastActivityDate="2016-03-31T18:30:42.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4930" PostTypeId="1" CreationDate="2016-03-31T18:48:59.270" Score="1" ViewCount="104" Body="&lt;p&gt;Now i have installed OS the third time...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everytime after the installation i can set the language/the systemlanguage to GERMAN.&#xA;When i make the update my keyboard layout is us and the settings are empty.&#xA;Then i set the settings to german, but when i close the systemsettings and reopen them - there are no languages set, and there are no languages available on the left side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i have google the problem and make everyone of the tipps - but nothing works...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;please help me! &lt;/p&gt;&#xA;" OwnerUserId="4640" LastEditorUserId="3757" LastEditDate="2016-04-04T01:59:33.697" LastActivityDate="2016-04-04T01:59:33.697" Title="After update all settings in system settings -&gt; languages and regions are empty" Tags="|settings|keyboard|language|keyboard-layout|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4933" PostTypeId="2" ParentId="4173" CreationDate="2016-04-01T08:44:02.747" Score="1" Body="&lt;p&gt;Some times the webcam could be disabled. Try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput --list&#xA;xinput enable id-of-your-webcam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2016-04-01T08:44:02.747" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4934" PostTypeId="2" ParentId="3390" CreationDate="2016-04-01T08:55:49.423" Score="2" Body="&lt;p&gt;Try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;efibootmgr&#xA;sudo efibootmgr -o XXXX,YYYY,ZZZZ&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where XXXX, YYYY, ZZZZ..... are the ids you got with the fist command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If elementary OS is your only OS why you have the Windows boot loader?&#xA;You could delete it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp -r /boot/efi/EFI/Microsoft ./backup #If you want backup it. Recomended&#xA;sudo rm -rf /boot/efi/EFI/Microsoft&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="3757" LastEditDate="2016-04-13T13:00:01.773" LastActivityDate="2016-04-13T13:00:01.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4935" PostTypeId="2" ParentId="4923" CreationDate="2016-04-01T09:13:00.043" Score="0" Body="&lt;p&gt;Try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;groups youruser&#xA;sudo useradd newuser -m -G x-group,y-group,z-group&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Option -G assigns newuser to x, y and z groups, option -m creates the home of newuser&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo passwd newuser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2016-04-01T09:13:00.043" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4936" PostTypeId="2" ParentId="4398" CreationDate="2016-04-01T09:31:33.880" Score="-1" Body="&lt;p&gt;Try chroot from LiveCD&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i&#xA;mount /dev/sdaX /mnt&#xA;mount --bind /dev /mnt/dev&#xA;mount --bind /sys /mnt/sys&#xA;mount -t proc /proc /mnt/proc&#xA;chroot /mnt&#xA;nano /etc/resolv.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add these lines to file, save and close it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;nameserver 8.8.8.8&#xA;nameserver 8.8.4.4&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Amd provides an unistaller under &lt;code&gt;/usr/share/ati&lt;/code&gt; (realy i don't remember the exact path)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/path-to-uninstaller-executable #if you have installed from AMD website&#xA;apt-get purge fglrx fglrx-core #if you used apt&#xA;apt-get update&#xA;apt-get install xserver-xorg-lts-utopic&#xA;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2016-04-01T09:31:33.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4938" PostTypeId="2" ParentId="3887" CreationDate="2016-04-01T09:41:41.133" Score="0" Body="&lt;p&gt;It seems the version number is out of range of supported kernels because have this format &lt;code&gt;4.4.0-040400rc7-generic&lt;/code&gt; but it have to be something like &lt;code&gt;X.X.X-XXX&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could use a kernel from ubuntu repositories. Do you really need to use the 4.4 version?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-generic-lts-wily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastActivityDate="2016-04-01T09:41:41.133" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4939" PostTypeId="2" ParentId="3887" CreationDate="2016-04-01T09:44:19.630" Score="1" Body="&lt;p&gt;I needed gcc4.9-multilib to recompile my DKMS modules after the upgrade.You can grab it out of the toolbox beta repository from Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that didn't work, post the log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /var/lib/dkms/vboxhost/5.0.12/build/make.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="4531" LastEditDate="2016-04-01T10:10:01.813" LastActivityDate="2016-04-01T10:10:01.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4941" PostTypeId="2" ParentId="2951" CreationDate="2016-04-01T10:19:23.263" Score="1" Body="&lt;p&gt;You should check the pre-install and post-install scripts inside the package, if you are installing a &lt;code&gt;.deb&lt;/code&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -x package.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can install fonts this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /usr/share/fonts/my-fonts&#xA;sudo cp /path-to-ttf-file /usr/share/fonts/my-fonts&#xA;sudo fc-cache -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3250" LastEditorUserId="84" LastEditDate="2018-05-05T18:47:30.617" LastActivityDate="2018-05-05T18:47:30.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="4942" PostTypeId="2" ParentId="4897" CreationDate="2016-04-01T12:33:23.560" Score="2" Body="&lt;p&gt;Well, thanks to some assistance on the Purism forums I found the answer to this. (Unfortunately, not before paving the OS, returning to PureOS, and wasting a lot of time tearing my hair out.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is extremely straightforward, so much so it made me feel very stupid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pressing &lt;kbd&gt;Fn&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; enables/disables the touchpad on the Purism Librem 13. So at some point it seems as though I accidentally pressed that combination. Obviously around the same time I was upgrading my kernel. False alarm, sorry folks.&lt;/p&gt;&#xA;" OwnerUserId="4566" LastActivityDate="2016-04-01T12:33:23.560" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4943" PostTypeId="1" AcceptedAnswerId="4947" CreationDate="2016-04-01T13:29:13.940" Score="1" ViewCount="101" Body="&lt;p&gt;I have created 3 bootable USB flash drives with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos-0.3.2-stable-amd64.20151209.iso  &#xA;sha-256 = ee737ffa6bf33b742c5a7cee17aa26dec5ee3b573cbbc4b53cbe2a2513c9197a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I used rufus-2.8 to create the flash drives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;laptop: thinkpad t420s  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It boots up normally to the screen where you select the language and can &quot;Try&quot; or &quot;Install&quot;.&lt;br&gt;&#xA;When I click on &lt;strong&gt;try&lt;/strong&gt;, it freezes and nothing happens.&lt;br&gt;&#xA;(Install seems to work, I did 2-3 steps jus to check)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I tried on 3 different keys and on 3 different usb ports (1, 2.0 &amp;amp; 3.0)&lt;/li&gt;&#xA;&lt;li&gt;latest Ubuntu 15.10 works well on 2 of the keys.&lt;/li&gt;&#xA;&lt;li&gt;I tried 2 keys on another computer and It worked normally too&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Is there something I can look for in the bios?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="4646" LastEditorUserId="3757" LastEditDate="2016-04-04T01:56:48.120" LastActivityDate="2016-04-04T01:56:48.120" Title="cannot try elemetary OS 0.3.2 64bit on my Thinkpad t420s" Tags="|system-installation|usb-drive|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4944" PostTypeId="1" CreationDate="2016-04-01T16:23:40.807" Score="1" ViewCount="556" Body="&lt;p&gt;i've installed Freya and everything is working nicely out of the box, except the WiFi.&lt;/p&gt;&#xA;&lt;p&gt;My laptop has a Killer 1535, so i followed their instructions (&lt;a href=&quot;http://www.killernetworking.com/support/knowledge-base/17-linux/20-killer-wireless-ac-in-linux-ubuntu-debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.killernetworking.com/support/knowledge-base/17-linux/20-killer-wireless-ac-in-linux-ubuntu-debian&lt;/a&gt;) and placed the content of kvalo's QCA6174 on my /lib/firmware/ath10k. My /lib/firmware/ath10k/QCA6174/hw3.0 content is:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;board-2.bin&lt;/p&gt;&#xA;&lt;p&gt;board.bin&lt;/p&gt;&#xA;&lt;p&gt;firmware-4.bin&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Since Freya uses a 3.x kernel i had to install the ath10k driver through backports.&#xA;So i installed the linux-headers and the build-essential, downloaded backports and ran these commands:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;make defconfig-ath10k&lt;/p&gt;&#xA;&lt;p&gt;make&lt;/p&gt;&#xA;&lt;p&gt;sudo make install&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Everything went fine and the install told me to reboot.&#xA;After the reboot the wireless icon appeared and listed my networks, but i couldn't establish a connection to them. After a few seconds they were not displayed anymore.&lt;/p&gt;&#xA;&lt;p&gt;Then i've ran&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dmesg | grep &amp;quot;ath&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Here's what i've got:&lt;/p&gt;&#xA;&lt;pre&gt;[    1.227654] Loaded X.509 cert 'Magrathea: Glacier signing key: ebbc4f7d1a69d375881e66dfa532d0f61eac585e'&#xA;[    3.309690] ath10k_pci 0000:03:00.0: enabling device (0000 -&gt; 0002)&#xA;[    3.310606] ath10k_pci 0000:03:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0&#xA;[    3.496935] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/cal-pci-0000:03:00.0.bin failed with error -2&#xA;[    3.497129] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-pci-168c:003e:1a56:1535.bin failed with error -2&#xA;[    3.497133] ath10k_pci 0000:03:00.0: failed to load spec board file, falling back to generic: -2&#xA;[    3.497301] ath10k_pci 0000:03:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2&#xA;[    3.497303] ath10k_pci 0000:03:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2&#xA;[    5.617141] ath10k_pci 0000:03:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:1a56:1535 fallback) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 htt 3.26 wmi 4 cal otp max_sta 32&#xA;[    5.617144] ath10k_pci 0000:03:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 0&#xA;[    6.615026] ath10k_pci 0000:03:00.0: suspend timed out - target pause event never came&#xA;[    9.682192] ath: EEPROM regdomain: 0x6c&#xA;[    9.682194] ath: EEPROM indicates we should expect a direct regpair map&#xA;[    9.682196] ath: Country alpha2 being used: 00&#xA;[    9.682196] ath: Regpair used: 0x6c&#xA;[   14.909701] ath10k_pci 0000:03:00.0: failed to enable ani by default: -11&#xA;[   17.909306] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   26.207947] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   29.207463] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   37.490244] ath10k_pci 0000:03:00.0: failed to enable ani by default: -11&#xA;[   40.489779] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   48.772370] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   51.771903] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   60.054655] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   63.054276] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   71.336908] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   74.336456] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   82.619270] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   85.618698] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[   93.901449] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[   96.901045] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[  105.183758] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[  108.183282] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;[  116.465947] ath10k_pci 0000:03:00.0: failed to enable dynamic BW: -11&#xA;[  119.465449] ath10k_pci 0000:03:00.0: could not suspend target (-11)&#xA;&lt;/pre&gt;&#xA;&lt;p&gt;Now I'm kind of lost. Any idea?&lt;/p&gt;&#xA;" OwnerUserId="4647" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-04-11T08:13:27.350" Title="Can't get ath10k (Killer Wifi 1535) to work on Freya" Tags="|release-freya|wifi|drivers|networking|" AnswerCount="1" CommentCount="5" ClosedDate="2016-04-06T18:39:38.167" ContentLicense="CC BY-SA 3.0" />
  <row Id="4945" PostTypeId="2" ParentId="4843" CreationDate="2016-04-01T18:16:29.210" Score="1" Body="&lt;p&gt;First of all, check that locale it's installed. From terminal, execute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /usr/share/i18n/SUPPORTED | grep 8859-7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can see an output like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;el_GR ISO-8859-7&#xA;el_CY ISO-8859-7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to configure your system with the first locale &lt;em&gt;(el_GR ISO-8859-7)&lt;/em&gt; you must reconfigure your environment. Try from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &quot;LANG=el_GR.ISO-8859-7&quot;&#xA;localectl set-locale &quot;LANGUAGE=el_GR.ISO-8859-7&quot;&#xA;localectl set-locale &quot;LC_ALL=el_GR.ISO-8859-7&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, you must generate your desired locale:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;locale-gen el_GR.ISO-8859-7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And finally:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure locales&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-01T18:16:29.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4946" PostTypeId="2" ParentId="4843" CreationDate="2016-04-01T20:09:29.993" Score="0" Body="&lt;p&gt;Maybe this could help.&#xA;I transformed file encoding from Windows-1251 to UTF-8 by this command in terminal:&#xA;iconv -f Windows-1251 -t UTF-8 inputfile.txt  &gt; outputfile.txt&lt;/p&gt;&#xA;" OwnerUserId="2633" LastActivityDate="2016-04-01T20:09:29.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4947" PostTypeId="2" ParentId="4943" CreationDate="2016-04-01T21:14:16.213" Score="1" Body="&lt;p&gt;I managed to do it by forcing UEFI in the bios. This starts a different menu early where you I could choose &quot;Try elementary os&quot; and that worked fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The exact option in the bios is: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UEFI/Legacy Boot Priority :     [UEFI First]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(got other big grub problems after but that's another story)&lt;/p&gt;&#xA;" OwnerUserId="4646" LastActivityDate="2016-04-01T21:14:16.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4950" PostTypeId="2" ParentId="4884" CreationDate="2016-04-02T10:24:48.140" Score="3" Body="&lt;p&gt;There is no facility to customize keyboard shortcuts per user within Pantheon Files at present.  If you feel a shortcut is inappropriate or missing in Pantheon Files you could raise a bug about it at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that some system keyboard shortcuts are customizable by going to System Settings/Keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: You could add a custom shortcut in Systems Settings/Keyboard that runs the command &quot;pantheon-files -n&quot;. This launches pantheon-files in a new window.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="3911" LastEditDate="2016-04-03T15:04:13.077" LastActivityDate="2016-04-03T15:04:13.077" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4951" PostTypeId="1" CreationDate="2016-04-02T12:00:48.473" Score="1" ViewCount="2430" Body="&lt;p&gt;A couple of days ago, I noticed blurry fonts in Steam. Now I think it may have something to do with Electron since GitKraken and Atom also have very blurry fonts to the point of being unusable. I have a multiple-monitor setup, but no high-dpi monitors. I already tried starting atom with &lt;code&gt;--force-device-scale-factor=1&lt;/code&gt; and &lt;code&gt;--high-dpi-support=1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, my laptop, which uses the same versions of elementary OS and Atom, has crisp clear fonts. So, I'm trying to figure out where these systems differ (multi-monitor setup vs laptop screen). But right now I have no clue. Could be Electron, could be the graphic driver, could be anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Screenshots&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6zudd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6zudd.png&quot; alt=&quot;Atom Editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qysjp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qysjp.png&quot; alt=&quot;GitKraken&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TngxU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TngxU.png&quot; alt=&quot;Steam&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25" LastEditorUserId="5565" LastEditDate="2016-10-06T03:17:45.380" LastActivityDate="2016-10-06T03:17:45.380" Title="Blurry fonts in Atom, Steam and GitKraken" Tags="|graphics|fonts|" AnswerCount="2" CommentCount="4" ClosedDate="2016-04-07T17:44:27.213" ContentLicense="CC BY-SA 3.0" />
  <row Id="4952" PostTypeId="2" ParentId="4837" CreationDate="2016-04-02T14:32:16.493" Score="0" Body="&lt;p&gt;I don't think that this is possible in terms of system default, because you usually use single keys in a different way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One option would be though, to work around this with &lt;a href=&quot;https://github.com/guoci/autokey-py3/blob/master/README.rst&quot; rel=&quot;nofollow&quot;&gt;autokey&lt;/a&gt; or anything other able to handle hotkeys.  &lt;/p&gt;&#xA;" OwnerUserId="4651" LastActivityDate="2016-04-02T14:32:16.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4953" PostTypeId="2" ParentId="4837" CreationDate="2016-04-02T15:02:45.123" Score="2" Body="&lt;p&gt;I use the &quot;menu-key&quot; start Synapse. You could try to bind that to the Application Launcher. The &quot;windows-key&quot; will probably not work, because it is a modifier-key and always used in conjunction with another key.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-04-02T15:02:45.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4954" PostTypeId="1" AcceptedAnswerId="4964" CreationDate="2016-04-02T18:16:28.673" Score="2" ViewCount="257" Body="&lt;p&gt;Further to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4897/touchpad-has-stopped-working-after-kernel-upgrade&quot;&gt;the problems I experienced with my touchpad&lt;/a&gt;, I am now encountering issues with bluetooth. Everything was working fine, but on my most recent reboot bluetooth now seems to have totally stopped working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From my searching around various forums, a weird thing is that the output of &lt;code&gt;rfkill list all&lt;/code&gt; is only this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsmod | grep ath&lt;/code&gt; outputs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ath3k                  20480  0 &#xA;ath9k                 147456  0 &#xA;ath9k_common           32768  1 ath9k&#xA;ath9k_hw              479232  2 ath9k_common,ath9k&#xA;ath                    32768  3 ath9k_common,ath9k,ath9k_hw&#xA;mac80211              753664  1 ath9k&#xA;cfg80211              561152  5 wl,ath,ath9k_common,ath9k,mac80211&#xA;bluetooth             516096  14 bnep,ath3k,btbcm,btusb,rfcomm,btintel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;bluetooth&lt;/code&gt; outputs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bluetooth = none (no device)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But before the last reboot, it was working great. I had paired a keyboard and mouse. In System Settings, everything on the Bluetooth page is greyed out. I can't even try to turn it on and the device list is now blank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts or assistance much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm feeling slightly closer, the output of &lt;code&gt;dmesg | grep -i blue&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    3.925283] Bluetooth: Core ver 2.20&#xA;[    3.925305] Bluetooth: HCI device and connection manager initialized&#xA;[    3.925309] Bluetooth: HCI socket layer initialized&#xA;[    3.925312] Bluetooth: L2CAP socket layer initialized&#xA;[    3.925318] Bluetooth: SCO socket layer initialized&#xA;[    3.946202] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    3.946205] Bluetooth: BNEP filters: protocol multicast&#xA;[    3.946209] Bluetooth: BNEP socket layer initialized&#xA;[    3.952299] Bluetooth: RFCOMM TTY layer initialized&#xA;[    3.952328] Bluetooth: RFCOMM socket layer initialized&#xA;[    3.952333] Bluetooth: RFCOMM ver 1.11&#xA;[    5.271147] Bluetooth: Patch file not found ar3k/AthrBT_0x11020100.dfu&#xA;[    5.271149] Bluetooth: Loading patch file failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It seems to be the same error as &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1394368&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, but a different bug causing it.&lt;/p&gt;&#xA;" OwnerUserId="4566" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-04T01:08:28.533" Title="Trouble with bluetooth intermittently working" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4955" PostTypeId="2" ParentId="4951" CreationDate="2016-04-03T01:55:00.107" Score="0" Body="&lt;p&gt;For what it's worth, I'm using Atom and Steam on Elementary OS with no problems. I have a FHD (1.5x) display, so initially both applications showed up with small (but sharp) text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I bumped up the font size in Atom by add the following line to &lt;code&gt;config.cson&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;require('web-frame').setZoomFactor(1.5)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Incidentally, I don't think Steam uses Electron. Steam for Linux &lt;a href=&quot;http://store.steampowered.com/news/9943/&quot; rel=&quot;nofollow&quot;&gt;came out in February 2013&lt;/a&gt;. Atom (the application for which Electron was built) was &lt;a href=&quot;http://blog.atom.io/2014/02/26/introducing-atom.html&quot; rel=&quot;nofollow&quot;&gt;announced in February 2014&lt;/a&gt;. Steam &lt;a href=&quot;https://developer.valvesoftware.com/wiki/Chromium_Embedded_Framework&quot; rel=&quot;nofollow&quot;&gt;does use Chromium&lt;/a&gt;, though, so that may be the link between these three applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few closed (but potentially relevant) issues on GitHub:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/atom/atom/issues/9454&quot; rel=&quot;nofollow&quot;&gt;https://github.com/atom/atom/issues/9454&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/atom/electron/issues/3349&quot; rel=&quot;nofollow&quot;&gt;https://github.com/atom/electron/issues/3349&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Finally, you could try updating Atom if you haven't already. Atom auto-updates on Windows and OS X but not Linux, which surprised me at first. I have to download a new .deb every time I want to upgrade Atom.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that's not an answer as such, but I hope it at least helps a little! :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-04-03T01:55:00.107" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4956" PostTypeId="1" AcceptedAnswerId="5070" CreationDate="2016-04-03T03:09:49.170" Score="0" ViewCount="2380" Body="&lt;p&gt;I installed rEFInd after GRUB2.Then I ran &lt;code&gt;bcdedit /set {bootmgr} path \EFI\refind\shim.efi&lt;/code&gt; in Windows 10 and disabled secure boot to get it to boot into rEFInd.But when I booted into Windows 10 my laptop stopped booting rEFInd and would boot Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way I can my HP laptop to permanently boot rEFInd&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2018-10-13T05:16:40.780" Title="How to get HP laptop to boot rEFInd" Tags="|dual-boot|uefi|microsoft-windows|refind|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4957" PostTypeId="2" ParentId="4944" CreationDate="2016-04-03T07:46:39.980" Score="0" Body="&lt;p&gt;I had similar problems on a new Skylake Intel NUC (nuc6i3syk, I know it's different but also new hardware): No or only partial wifi on kernels 3.x and ripping graphic glitches on kernels 4.3-4.5 and everything in between. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What does now work for me is kernel 4.2.8.&#xA;Both 2.4 Ghz and 5 Ghz bands now work and no graphic glitches. &#xA;Did you try 4.2.8 as well?&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-04-03T07:46:39.980" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4958" PostTypeId="2" ParentId="4920" CreationDate="2016-04-03T09:49:37.637" Score="1" Body="&lt;p&gt;Try running the following commands in the terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install g++-5&#xA;sudo apt-get install gcc-5&#xA;sudo rm -f /usr/bin/g++&#xA;sudo rm -f /usr/bin/gcc&#xA;ln -s /usr/bin/gcc /usr/bin/gcc-5&#xA;ln -s /usr/bin/g++ /usr/bin/g++-5&#xA;sudo apt-get install --reinstall virtualbox-5.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me after updating to kernel 4.4 LTS to get VirtualBox working so I can do my OS development&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-06T07:19:30.533" LastActivityDate="2016-04-06T07:19:30.533" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="4959" PostTypeId="2" ParentId="4894" CreationDate="2016-04-03T15:11:38.177" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;choose something else&lt;/li&gt;&#xA;&lt;li&gt;Create a ext4 partition for root &lt;/li&gt;&#xA;&lt;li&gt;Also create a swap area&lt;/li&gt;&#xA;&lt;li&gt;And process to installation&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4397" LastActivityDate="2016-04-03T15:11:38.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4960" PostTypeId="2" ParentId="4923" CreationDate="2016-04-03T16:54:16.160" Score="0" Body="&lt;p&gt;I reinstalled the OS. Now it is working&lt;/p&gt;&#xA;" OwnerUserId="4634" LastActivityDate="2016-04-03T16:54:16.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4961" PostTypeId="1" AcceptedAnswerId="8659" CreationDate="2016-04-03T17:15:46.180" Score="9" ViewCount="2592" Body="&lt;p&gt;How to enable those function (alt + number) on my elementary OS? I can't insert tilde and &quot;ñ&quot; letter because I don't have those buttons and also can't use the alt + number. Someone have an idea? Thanks&lt;/p&gt;&#xA;" OwnerUserId="3470" LastEditorUserId="3757" LastEditDate="2016-04-04T01:51:20.323" LastActivityDate="2017-12-01T02:16:06.403" Title="How to insert characters by pressing ALT + # (numpad)?" Tags="|keyboard-shortcuts|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="4964" PostTypeId="2" ParentId="4954" CreationDate="2016-04-04T01:08:28.533" Score="1" Body="&lt;p&gt;I have finally managed to sort this out by reading through a number of bug reports and eventually getting some help from a friendly good Samaritan. If anyone comes across this issue, here's what you need to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, update your kernel to the latest long-term support:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install linux-generic-lts-wily&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, download these two firmware files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453553/+files/AthrBT_0x11020100.dfu&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453553/+files/AthrBT_0x11020100.dfu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453554/+files/ramps_0x11020100_40.dfu&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453554/+files/ramps_0x11020100_40.dfu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And put them in: &lt;code&gt;/lib/firmware/ar3k/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot, and then rejoice!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So delighted to finally have everything working properly on my Librem 13 with Elementary OS! :)&lt;/p&gt;&#xA;" OwnerUserId="4566" LastActivityDate="2016-04-04T01:08:28.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4965" PostTypeId="2" ParentId="4925" CreationDate="2016-04-04T02:01:39.723" Score="1" Body="&lt;p&gt;I got this same error when I was not connected to the internet. Looks like it is a bug in the installer but it should install if you have a internet connection&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-04T02:01:39.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4968" PostTypeId="1" CreationDate="2016-04-04T07:38:12.303" Score="2" ViewCount="61" Body="&lt;p&gt;Is it possible to change the way filetypes are displayed in Files columns? I think it would be enough to display JPEG instead of the lengthy full description &quot;Joint Photographers Experts Group (JPEG) image file format&quot;. That takes up so much space! &lt;a href=&quot;https://i.stack.imgur.com/5A9rj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5A9rj.png&quot; alt=&quot;Filetype display&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3813" LastActivityDate="2016-04-04T07:38:12.303" Title="Display of filetype description in Pantheon Files" Tags="|pantheon-files|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-30T18:01:28.783" ContentLicense="CC BY-SA 3.0" />
  <row Id="4970" PostTypeId="1" CreationDate="2016-04-04T14:28:46.430" Score="1" ViewCount="65" Body="&lt;p&gt;When you right-click a file you can select from the context menu &quot;open with&quot;, to select the app you want to open the file with. If I want to prevent(or remove or hide) an app to show in the context menu, how do I do it? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2016-04-04T17:14:45.340" Title="How to remove an app from the context menu?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4971" PostTypeId="2" ParentId="4970" CreationDate="2016-04-04T17:14:45.340" Score="1" Body="&lt;p&gt;The only real way to do this is to uninstall the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can modify the app's &lt;code&gt;.desktop&lt;/code&gt; file to indicate that the app cannot handle that file type, but that comes with a couple obvious drawbacks:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You are telling the system that this app cannot handle that file type at all. Which means anywhere the system tries to list apps that open that file type, it will no longer recognize that app&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Any time you get an update for that app that affects the &lt;code&gt;.desktop&lt;/code&gt; file, your changes will be overwritten.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-04-04T17:14:45.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4972" PostTypeId="1" CreationDate="2016-04-04T17:27:15.097" Score="2" ViewCount="156" Body="&lt;p&gt;After some updates, some icons of my control panel (including volume) are gone, I've had this problem with Ubuntu, and managed to solve at the time, but as Elementary environment is different, the solution did not follow as expected.&#xA;I Need help :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nSaOy.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nSaOy.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4667" LastActivityDate="2016-04-04T17:27:15.097" Title="Some of the icons are gone Control Panel" Tags="|settings|system|icons|" AnswerCount="0" CommentCount="2" ClosedDate="2016-12-28T18:55:04.887" ContentLicense="CC BY-SA 3.0" />
  <row Id="4973" PostTypeId="1" AcceptedAnswerId="5195" CreationDate="2016-04-04T17:29:04.587" Score="2" ViewCount="131" Body="&lt;p&gt;I recall reading somewhere either here or on the elementary OS site that the maximum resolution supported is something like 2560x1600.  Is that true, or are higher resolutions supported?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ask because I've got two monitors, one 2560x1600 and the other 3840×2160.  Elementary OS looks great and I'd like to try it.&lt;/p&gt;&#xA;" OwnerUserId="4668" LastActivityDate="2022-04-09T01:24:20.960" Title="What is the maximum resolution supported by elementary OS?" Tags="|display|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4975" PostTypeId="2" ParentId="4898" CreationDate="2016-04-04T23:42:50.067" Score="0" Body="&lt;p&gt;I finally found a solution: I just updated the Kernel (standard in Elementary OS is 3.19) to 4.2.8 and now it works.&#xA;For some reasons&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;watch grep \&quot;cpu MHz\&quot; /proc/cpuinfo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;shows a few spikes to a higher frequency from time to time (would be interesting to know why) but thats ok, it instantly goes back to 1.2 GHz.&lt;/p&gt;&#xA;" OwnerUserId="4617" LastActivityDate="2016-04-04T23:42:50.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4977" PostTypeId="1" CreationDate="2016-04-05T11:48:11.423" Score="1" ViewCount="829" Body="&lt;p&gt;Due to the way Terminal clears the screen with the &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; shortcut, I'm unfortunately finding myself using other terminals for most things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I work with logs a lot, and need to be able to quickly &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; to Select All and copy text into some other app. If I can clear the buffer, I can easily get the text I need without all the unrelated history.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately as Terminal leaves the buffer in place when using &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt;, Select All contains the entire session's history, not just the recent logs. This is a big deal with you're trying to view the last 500 lines of a command line session that has 10k lines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand that &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; is just clear screen, and so also clearing the buffer might be something entirely different, but the lack of this is slowing me down. Thanks for your great work!&lt;/p&gt;&#xA;" OwnerUserId="4466" LastActivityDate="2018-02-15T13:48:35.590" Title="How can I clear and reset the buffer in Terminal?" Tags="|applications|pantheon-terminal|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4978" PostTypeId="1" AcceptedAnswerId="4982" CreationDate="2016-04-05T16:07:33.213" Score="1" ViewCount="1158" Body="&lt;p&gt;I've added a Gmail account to Geary to try it. Now, I want to remove it, so that I don't receive notifications from it anymore (and so that I don't get that annoying keyring dialog at startup!). Now, I want to remove that account, and stop Geary from syncing with it. How can I do that? The &quot;remove&quot; option on the Accounts screen is greyed-out, probably because it's the only account.&lt;/p&gt;&#xA;" OwnerUserId="78" LastEditorUserId="78" LastEditDate="2016-04-05T16:16:45.573" LastActivityDate="2016-04-06T01:02:00.343" Title="How can I log-out of Geary?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2017-12-16T18:15:14.413" ContentLicense="CC BY-SA 3.0" />
  <row Id="4979" PostTypeId="1" CreationDate="2016-04-05T16:39:18.717" Score="1" ViewCount="152" Body="&lt;p&gt;sorry for my English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My pc no carga despues de que le ingreso mi clave. Despues de ingresar mi clave intenta entrar pero se devuelve al inicio. la pantalla no carga la imagen de  mi escritorio. mi pc es un samsung.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;English Translation: My pc is not loading after introducing my password. It gets me back to the initial page. It doesn't load the background image of my desktop. My Pc is a Samsung.&lt;/p&gt;&#xA;" OwnerUserId="4676" LastEditorUserId="4684" LastEditDate="2016-04-07T17:41:57.900" LastActivityDate="2016-04-07T19:52:08.220" Title="My operating system does not start after entering the password" Tags="|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4980" PostTypeId="2" ParentId="3133" CreationDate="2016-04-05T17:41:00.090" Score="2" Body="&lt;p&gt;On my system (which is Ubuntu and vocal 1.0), it is in &lt;code&gt;~/.local/share/vocal&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4677" LastEditorUserId="3757" LastEditDate="2016-04-06T11:56:57.027" LastActivityDate="2016-04-06T11:56:57.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4982" PostTypeId="2" ParentId="4978" CreationDate="2016-04-06T01:02:00.343" Score="1" Body="&lt;p&gt;You can get rid of notifications by going to preferences (the gear icon) and unchecking &quot;always watch for new mail.&quot; This will prevent Geary from running in the background. For good measure, you can also turn off notifications for Geary in System Settings --&gt; Notifications --&gt; Geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove Geary completely, open Software Center and go to Installed --&gt; Internet --&gt; Geary Mail and click the &quot;remove&quot; button.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-04-06T01:02:00.343" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4983" PostTypeId="2" ParentId="4951" CreationDate="2016-04-06T09:48:08.837" Score="3" Body="&lt;p&gt;Solution: It was neither Electron nor Elementary OS but the Nvidia driver. All I had to do was disable FXAA Antialiasing in the antialiasing settings.  Now everything is sharp again: Atom, GitKraken and even Steam. So, if you come across blurry fonts, follow these steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open Nvidea X Server Settings&lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;X Screen 0 -&amp;gt; Antialiasing Settings&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Remove the checkmark next to &lt;code&gt;Enable FXAA&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You only need to restart your applications, not your computer.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-04-06T09:48:08.837" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4984" PostTypeId="2" ParentId="4979" CreationDate="2016-04-06T11:30:09.443" Score="0" Body="&lt;p&gt;I know it sounds stupid, but, are you sure of your password? Does it used to work or it is the first time after installing the OS that you try to log in?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Se que suena estupido, pero estás seguro del password? Había funcionado antes o no te funciona justo después de la instalación?&lt;/p&gt;&#xA;" OwnerUserId="4684" LastActivityDate="2016-04-06T11:30:09.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4985" PostTypeId="2" ParentId="4977" CreationDate="2016-04-06T11:32:20.077" Score="5" Body="&lt;p&gt;The &lt;code&gt;reset&lt;/code&gt; command might be what you are looking for.&lt;/p&gt;&#xA;" OwnerUserId="4502" LastActivityDate="2016-04-06T11:32:20.077" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="4986" PostTypeId="1" AcceptedAnswerId="4990" CreationDate="2016-04-06T13:53:32.667" Score="2" ViewCount="775" Body="&lt;p&gt;I somehow seem to have enabled the Midori statusbar while fiddling around with the various extensions and now I can't figure out how to turn it off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Searching the web I found a 'show_statusbar' boolean settings value for Midori, but I'm not sure where or how to toggle this.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-04-06T17:52:34.220" LastActivityDate="2016-04-06T17:52:34.220" Title="How does one disable the Midori status bar?" Tags="|midori|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4987" PostTypeId="1" AcceptedAnswerId="5030" CreationDate="2016-04-06T14:49:22.737" Score="6" ViewCount="555" Body="&lt;p&gt;Is there any utility that can be integrated into Files so that I can just right click a folder -&gt; encrypt/decrypt? If not, would you recommend me any GUI software to encrypt entire folders? I've been trying cryptkeeper but everytime I try to create a new encrypted folder, it crashes.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="242" LastEditDate="2016-04-06T18:42:23.357" LastActivityDate="2016-04-09T10:57:32.080" Title="Is there a pantheon-integrated encryption utility?" Tags="|pantheon-files|security|software-recommendation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4988" PostTypeId="2" ParentId="4767" CreationDate="2016-04-06T15:02:31.310" Score="1" Body="&lt;p&gt;I'm now fairly confident I found the issue.&#xA;Judging by cat /var/lib/dkms/8812au/kernel-3.19.0-58-generic-x86_64/log/make.log the module is always build against $(uname -r) headers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using DKMS to manually building the module against an older kernel version and that did not work either. I got this working after editing the Makefile for the module and set it to build against $kernelver instead. THis variable is set up by DKMS with the name of the target kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This &lt;em&gt;should&lt;/em&gt; also fix the issue with the module not building after kernel updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this might help someone else in the future.&lt;/p&gt;&#xA;" OwnerUserId="4505" LastActivityDate="2016-04-06T15:02:31.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4989" PostTypeId="2" ParentId="2783" CreationDate="2016-04-06T17:20:29.403" Score="0" Body="&lt;p&gt;I have installed elementary OS freya and I am experiencing the same shutdown problem. In my case I installed AMD Radeon driver (graphic card) to my hardware in Lenovo G50-80 laptop. Packages are in the repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# sudo apt-get install fglrx-core fglrxamdcccle&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4686" LastActivityDate="2016-04-06T17:20:29.403" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="4990" PostTypeId="2" ParentId="4986" CreationDate="2016-04-06T17:44:12.427" Score="2" Body="&lt;p&gt;If you right click on a tool item in Midori's headerbar you should see a menu that will let you toggle off the Bookmarkbar and Statusbar:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vwlNy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vwlNy.png&quot; alt=&quot;Headerbar Context Menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-04-06T17:44:12.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4992" PostTypeId="1" AcceptedAnswerId="5003" CreationDate="2016-04-06T19:43:53.097" Score="0" ViewCount="223" Body="&lt;p&gt;I'm running elementary OS 0.3.2. I use Okular as my main PDF reader since I believe it is miles above Evince regarding features, ease of use, speed, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, I have version 0.19.3 installed, which I obtained simply by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install okular&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and the &lt;a href=&quot;https://okular.kde.org/&quot; rel=&quot;nofollow&quot;&gt;current version is 0.24&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can Okular be upgraded to its latest version?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-04-07T16:59:21.917" Title="Is it possible to upgrade to the latest version of Okular?" Tags="|release-freya|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4993" PostTypeId="1" AcceptedAnswerId="8487" CreationDate="2016-04-06T20:44:07.773" Score="2" ViewCount="323" Body="&lt;p&gt;This is similar to an earlier question asking for an &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/231/are-there-any-irc-clients-that-comply-with-the-human-interface-guidelines&quot;&gt;HIG-compliant IRC client&lt;/a&gt; recommendation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's was some &lt;a href=&quot;https://blueprints.launchpad.net/elementaryos/+spec/im-client&quot; rel=&quot;nofollow&quot;&gt;talk about an elementary OS-specific chat client back in 2012&lt;/a&gt; but nothing seems to have come of it.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="5565" LastEditDate="2016-10-04T09:53:31.797" LastActivityDate="2016-10-04T09:55:22.480" Title="XMPP chat client that meets Human Interface Guidelines" Tags="|design|software-recommendation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4994" PostTypeId="2" ParentId="1468" CreationDate="2016-04-06T21:14:59.957" Score="0" Body="&lt;p&gt;You should use the BIOS setting, then you can still use Fn+ESC to toggle the opposite. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you always depend on Fn+ESC, sometimes you'll forget to enable it when you start up, and plus the green LED will over time Dim and consume a small amount of extra energy... for no real reason.&lt;/p&gt;&#xA;" OwnerUserId="4689" LastActivityDate="2016-04-06T21:14:59.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4995" PostTypeId="1" CreationDate="2016-04-06T23:05:03.617" Score="2" ViewCount="272" Body="&lt;p&gt;I have attempted to connect Maya to Yahoo! Calendar using the same instructions as for Mozilla Thunderbird with Lightning, but it keeps returning Error 8 (Message Corrupt).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As per an answer given for a different CalDAV provider, I attempted to set it up without the &lt;code&gt;@yahoo.com&lt;/code&gt; in the userid, but I keep getting the same error message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone successfully set this up? It works in Lightning.&lt;/p&gt;&#xA;" OwnerUserId="4664" LastEditorUserId="3757" LastEditDate="2016-04-07T03:35:04.493" LastActivityDate="2016-09-25T09:37:56.670" Title="Can Maya be connected to Yahoo! Calendar via CalDAV?" Tags="|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4996" PostTypeId="1" AcceptedAnswerId="5001" CreationDate="2016-04-07T12:10:06.200" Score="1" ViewCount="77" Body="&lt;p&gt;I run Freya with a 4.2.8 Kernel on a new Intel Skylake NUC i3.&#xA;Hardware acceleration of the Intel HD 520 works with &quot;i915.preliminary_hw_support=1&quot; in Grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I don't have any Nvidia hardware.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On startup bumblebeed tries to start and then quits (cause no Nvidia).&#xA;(there are a few dozen fails in dmesg when I look it up)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this isn't a big issue but why try to start a process that's not needed anyway?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;So can I safely remove it?&lt;/strong&gt; (e.g. with purge)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or would this result in conflicts with remaining Nvidia drivers in the kernel? (as bumblebee would switch between integrated and dGPU)&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-04-10T08:15:23.407" Title="Can I deinstall bumblebee if not needed?" Tags="|boot|kernel|bumblebee|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="4997" PostTypeId="5" CreationDate="2016-04-07T13:32:21.280" Score="0" Body="&lt;p&gt;A display is a device which displays content and could be on a laptop, monitor, or TV. A display requires a GPU to function and display content.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-04-07T17:41:41.197" LastActivityDate="2016-04-07T17:41:41.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4998" PostTypeId="4" CreationDate="2016-04-07T13:32:21.280" Score="0" Body="The display tag should be used for display and video related issues. Questions about hardware issues and what display to buy are off-topic." OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-04-07T17:42:10.167" LastActivityDate="2016-04-07T17:42:10.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="4999" PostTypeId="2" ParentId="2677" CreationDate="2016-04-07T13:48:02.377" Score="3" Body="&lt;p&gt;Try running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ppa-purge&#xA;sudo ppa-purge ppa:varlesh-l/test&#xA;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove the PPA and reinstall the desktop and remove any customizations&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-08T09:43:14.743" LastActivityDate="2016-04-08T09:43:14.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5000" PostTypeId="2" ParentId="4987" CreationDate="2016-04-07T14:03:53.040" Score="-3" Body="&lt;p&gt;Have a look at SeaHorse for Ubuntu :)&lt;/p&gt;&#xA;" OwnerUserId="4692" LastActivityDate="2016-04-07T14:03:53.040" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5001" PostTypeId="2" ParentId="4996" CreationDate="2016-04-07T15:56:23.437" Score="0" Body="&lt;p&gt;&lt;strong&gt;It is safe&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;...to remove bumblebee and it's components via &lt;code&gt;apt-get&lt;/code&gt; as you are not using it.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="3757" LastEditDate="2016-04-10T08:15:23.407" LastActivityDate="2016-04-10T08:15:23.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5002" PostTypeId="2" ParentId="2783" CreationDate="2016-04-07T16:18:42.797" Score="-1" Body="&lt;p&gt;This is very radical and application will &lt;strong&gt;not&lt;/strong&gt; be closed properly. However, if you quit everything correctly that shouldn't be an issue.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo poweroff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;will kill the power instantly, without waiting for plymouth. &lt;strong&gt;This is not recommended&lt;/strong&gt;, but until this issue (which affects me too) is fixed, it should work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;System:    Host: FuckTheSystem Kernel: 4.4.6-040406-generic x86_64 (64 bit, gcc: 5.2.1) &#xA;           Desktop: Gnome Distro: elementary OS 0.3.2 freya&#xA;Machine:   System: ECT product: N/A&#xA;           Mobo: Notebook model: W65_67SF Bios: American Megatrends version: 1.03.03 date: 04/01/2014&#xA;CPU:       Quad core Intel Core i7-4810MQ CPU (-HT-MCP-) cache: 6144 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 22349.8 &#xA;           Clock Speeds: 1: 2794.093 MHz 2: 2800.00 MHz 3: 2805.468 MHz 4: 2789.937 MHz 5: 2782.500 MHz 6: 2825.265 MHz 7: 2780.859 MHz 8: 2764.453 MHz&#xA;Graphics:  Card: Intel 4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0 &#xA;           X.Org: 1.17.1 driver: intel Resolution: 1920x1080@60.0hz &#xA;           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes&#xA;Audio:     Card-1: Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel bus-ID: 00:1b.0 &#xA;           Card-2: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller driver: snd_hda_intel bus-ID: 00:03.0 &#xA;           Card-3: Logitech driver: USB Audio usb-ID: 003-006 &#xA;           Sound: Advanced Linux Sound Architecture ver: k4.4.6-040406-generic&#xA;Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller &#xA;           driver: r8169 ver: 2.3LK-NAPI port: d000 bus-ID: 04:00.2&#xA;           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 80:fa:5b:06:6f:e4&#xA;           Card-2: Intel Wireless 3160 driver: iwlwifi bus-ID: 03:00.0&#xA;           IF: wlan0 state: up mac: 30:3a:64:54:c7:7f&#xA;Drives:    HDD Total Size: 370.1GB (3.8% used) 1: id: /dev/sda model: Samsung_SSD_850 size: 120.0GB temp: 0C &#xA;           2: id: /dev/sdb model: Samsung_SSD_840 size: 250.1GB temp: 0C &#xA;Partition: ID: / size: 213G used: 14G (7%) fs: ext4 &#xA;RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present&#xA;Sensors:   System Temperatures: cpu: 14.0C mobo: N/A &#xA;           Fan Speeds (in rpm): cpu: N/A &#xA;Info:      Processes: 275 Uptime: 59 min Memory: 1072.9/15931.8MB Runlevel: 2 Gcc sys: 4.9.3 &#xA;           Client: Shell (bash 4.3.11) inxi: 1.9.17&#xA;&lt;/pre&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-07T16:18:42.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5003" PostTypeId="2" ParentId="4992" CreationDate="2016-04-07T16:59:21.917" Score="1" Body="&lt;p&gt;You can build it from it's source: &lt;a href=&quot;https://okular.kde.org/download.php&quot; rel=&quot;nofollow&quot;&gt;https://okular.kde.org/download.php&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However that would require to get a complete KDE4 Development Set.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-07T16:59:21.917" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5004" PostTypeId="1" CreationDate="2016-04-07T19:20:17.960" Score="1" ViewCount="683" Body="&lt;p&gt;I installed the &lt;code&gt;openssh-server&lt;/code&gt; package but only want it to start on demand, as opposed to boot which is the package default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried to disable the SSH server using upstart I got the following output and warning&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-rc.d ssh disable&#xA;update-rc.d: warning:  start runlevel arguments (none) do not match ssh &#xA;Default-Start values (2 3 4 5)&#xA;System start/stop links for /etc/init.d/ssh do not exist.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is this something to be concerned about? Should I be using another method? Best I can tell Freya is based on Ubuntu 14.04 which was still using upstart as the service management system.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="3757" LastEditDate="2016-04-13T12:53:29.160" LastActivityDate="2016-05-13T13:19:58.743" Title="What is the supported method for enabling/disabling services on elementary OS?" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5005" PostTypeId="2" ParentId="5004" CreationDate="2016-04-07T19:46:59.953" Score="1" Body="&lt;p&gt;It's not ssh, it's ssh&lt;strong&gt;d&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo service sshd disable&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4531" LastEditorUserId="4531" LastEditDate="2016-04-07T20:07:59.430" LastActivityDate="2016-04-07T20:07:59.430" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5006" PostTypeId="2" ParentId="4979" CreationDate="2016-04-07T19:52:08.220" Score="1" Body="&lt;p&gt;This typically happens when the X Server (The Service that draws stuff to your desktop... &lt;em&gt;roughly described&lt;/em&gt;) can't start up. You need to get the errors out of the Xorg log file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /var/log/Xorg.0.log | grep EE&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;... which will then output all Xorg errors. I think that something's wrong with the graphics driver.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-07T19:52:08.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5007" PostTypeId="1" CreationDate="2016-04-07T20:54:57.947" Score="8" ViewCount="14296" Body="&lt;p&gt;I'm dual-booting Xubuntu and elementary OS just for fun and comparison... I'm finding Xubuntu faster and smoother, which is a big surprise to me, as I was sure the ultralight Pantheon desktop would be quicker and more nimble, even if less configurable (which is okay with me - it's perfect as is - just slower and &quot;choppier&quot;).  I'd like to speed it up, so it's at least as fast as Xubuntu!  I looked at &lt;strong&gt;System Settings &gt; Applications &gt; Startup&lt;/strong&gt; to see if I could disable any unneeded services, but &lt;em&gt;no startup apps are visible&lt;/em&gt; in the Startup box!  I know they must be running, since I have this gorgeous desktop and a superb network connection and my printer works, sound, etc.  How do I select and disable unneeded services and keep it set up that way?  Also, do I need to decrease &quot;swappiness&quot; and other things to speed up elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for thoughtful replies.&lt;/p&gt;&#xA;" OwnerUserId="4697" LastEditorUserId="3757" LastEditDate="2016-04-08T09:51:01.403" LastActivityDate="2016-09-11T18:38:35.087" Title="Generally speed up elementary OS" Tags="|settings|startup|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5010" PostTypeId="5" CreationDate="2016-04-08T09:00:56.257" Score="0" Body="&lt;p&gt;Updating is a way to keep software on your computer up-to date. Elementary OS has a built-in software updater already installed which is a GUI version of &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:14.293" LastActivityDate="2016-04-16T05:51:14.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5011" PostTypeId="4" CreationDate="2016-04-08T09:00:56.257" Score="0" Body="Use this tag for questions about updates and issues after updating" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:35.827" LastActivityDate="2016-04-16T05:51:35.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5012" PostTypeId="5" CreationDate="2016-04-08T09:06:17.633" Score="0" Body="&lt;p&gt;Networking is way for computer and other devices to communicate with each other. This could be local networking or the internet&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:17.350" LastActivityDate="2016-04-16T05:52:17.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5013" PostTypeId="4" CreationDate="2016-04-08T09:06:17.633" Score="0" Body="Use this tag for networking and internet related issues in elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:20.223" LastActivityDate="2016-04-16T05:52:20.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5014" PostTypeId="5" CreationDate="2016-04-08T09:08:25.553" Score="0" Body="&lt;p&gt;GTK+ (formerly GIMP Toolkit, sometimes incorrectly termed the GNOME Toolkit) is a cross-platform widget toolkit for creating graphical user interfaces. It is licensed under the terms of the LGPL, allowing both free and proprietary software to use it. It is one of the most popular toolkits for the Wayland and X11 windowing systems, along with Qt.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:48.347" LastActivityDate="2016-04-16T05:51:48.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5015" PostTypeId="4" CreationDate="2016-04-08T09:08:25.553" Score="0" Body="Use this tag for GTK and theming related issues" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:00.940" LastActivityDate="2016-04-16T05:52:00.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5016" PostTypeId="5" CreationDate="2016-04-08T09:14:27.337" Score="0" Body="&lt;p&gt;Bluetooth is a wireless technology standard for exchanging data over short distances (using short-wavelength UHF radio waves in the ISM band from 2.4 to 2.485 GHz) from fixed and mobile devices, and building personal area networks (PANs). Invented by telecom vendor Ericsson in 1994, it was originally conceived as a wireless alternative to RS-232 data cables. It can connect several devices, overcoming problems of synchronization.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:52.737" LastActivityDate="2016-04-16T05:51:52.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5017" PostTypeId="4" CreationDate="2016-04-08T09:14:27.337" Score="0" Body="Use this tag for issues relating to Bluetooth on elementary OS " OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:56.003" LastActivityDate="2016-04-16T05:51:56.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5018" PostTypeId="5" CreationDate="2016-04-08T09:16:42.820" Score="0" Body="&lt;p&gt;A USB flash drive, also commonly known as a jump drive, thumb drive and a variety of other names, is a data storage device that includes flash memory with an integrated USB interface. USB flash drives are typically removable and rewritable, and physically much smaller than an optical disc. Most weigh less than 30 grams (1.1 oz). As of January 2013, drives of up to 512 gigabytes (GB) were available.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:30.367" LastActivityDate="2016-04-16T05:52:30.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5019" PostTypeId="4" CreationDate="2016-04-08T09:16:42.820" Score="0" Body="Use this tag for issues relating to elementary OS and USB drives and booting elementary OS from a USB drive" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:09.973" LastActivityDate="2016-04-16T05:52:09.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5020" PostTypeId="5" CreationDate="2016-04-08T09:19:39.697" Score="0" Body="&lt;p&gt;Microsoft Windows (or simply Windows) is a metafamily of graphical operating systems developed, marketed, and sold by Microsoft. It consists of several families of operating systems, each of which cater to a certain sector of the computing industry. Active Windows families include Windows NT, Windows Embedded and Windows Phone; these may encompass subfamilies, e.g. Windows Embedded Compact (Windows CE) or Windows Server. Defunct Windows families include Windows 9x and Windows Mobile.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:23.577" LastActivityDate="2016-04-16T05:51:23.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5021" PostTypeId="4" CreationDate="2016-04-08T09:19:39.697" Score="0" Body="Use this tag for questions about dual-booting Windows and elementary OS and other Windows related issues after dual-booting. Questions about Windows are off-topic (head to SuperUser)" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:38.350" LastActivityDate="2016-04-16T05:52:38.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5022" PostTypeId="5" CreationDate="2016-04-08T09:22:16.853" Score="0" Body="&lt;p&gt;Wine (recursive acronym for Wine Is Not an Emulator) is a free and open source compatibility layer software application that aims to allow applications designed for Microsoft Windows to run on Unix-like operating systems. Wine also provides a software library, known as Winelib, against which developers can compile Windows applications to help port them to Unix-like systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It duplicates functions of Windows by providing alternative imple&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:51:30.013" LastActivityDate="2016-04-16T05:51:30.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5023" PostTypeId="4" CreationDate="2016-04-08T09:22:16.853" Score="0" Body="Use this tag for questions related to running WINE on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:41.663" LastActivityDate="2016-04-16T05:52:41.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5024" PostTypeId="5" CreationDate="2016-04-08T09:26:09.870" Score="0" Body="&lt;p&gt;VLC media player (commonly known as VLC) is a portable, free and open-source, cross-platform media player and streaming media server written by the VideoLAN project. VLC is available for desktop operating systems and mobile platforms, such as Android, iPad, iPhone, and iPod Touch. VLC is also available on App stores such as Apple's App Store.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:25.490" LastActivityDate="2016-04-16T05:52:25.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5025" PostTypeId="4" CreationDate="2016-04-08T09:26:09.870" Score="0" Body="Use this tag for questions relating to VLC running on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-16T05:52:04.020" LastActivityDate="2016-04-16T05:52:04.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5026" PostTypeId="1" AcceptedAnswerId="5027" CreationDate="2016-04-08T16:44:27.023" Score="1" ViewCount="327" Body="&lt;p&gt;How do I setup and use a serial console on Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2020-08-10T21:05:36.557" LastActivityDate="2020-08-10T21:05:36.557" Title="How do I setup and use a USB serial console adapter?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5027" PostTypeId="2" ParentId="5026" CreationDate="2016-04-08T16:44:27.023" Score="0" Body="&lt;p&gt;I like using the &lt;a href=&quot;https://www.parallax.com/product/28030&quot; rel=&quot;nofollow&quot;&gt;Parallax USB to serial adapter&lt;/a&gt; because it enjoys good support on *NIX operating systems. You can pick them up in the robotics section at Frys electronics in the U.S. for around $17.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After connecting the adapter, run dmesg, you're looking for a few lines at the end like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ 2970.548809] usb 2-1: Detected FT232RL&#xA;[ 2970.551218] usb 2-1: FTDI USB Serial Device converter now attached to ttyUSB0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note the device name 'ttyUSB0'. Run a long list on this to determine which group it is owned by;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ls -l /dev/ttyUSB0&#xA;crw-rw---- 1 root dialout 188, 0 Apr  8 09:24 /dev/ttyUSB0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add your user account to that group. This way you can run the terminal program as a non-root user.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gpasswd -u &amp;lt;username&amp;gt; dialout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Log out and back in for the group change to take effect    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the picocom terminal utility&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -y picocom&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Connect to the serial console using the appropriate baud rate for your target device and the device name as shown in dmesg earlier&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;picocom -b 38400 /dev/ttyUSB0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To exit picocom press &lt;code&gt;CTRL-a-x&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-06-22T23:57:25.447" LastActivityDate="2016-06-22T23:57:25.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5028" PostTypeId="1" AcceptedAnswerId="5055" CreationDate="2016-04-08T16:48:34.413" Score="1" ViewCount="561" Body="&lt;p&gt;(I was told by AskUbuntu to post my question here)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed SQL Developer, which I need to execute by running &lt;br&gt;&#xA;&lt;code&gt;sudo /opt/sqldeveloper/sqldeveloper.sh&lt;/code&gt; &lt;br&gt;&#xA;&lt;br&gt;&#xA;I made a custom .desktop file in &lt;code&gt;/usr/share/applications&lt;/code&gt; with the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=SQLDeveloper&#xA;Comment=SQL Developer&#xA;Exec=sudo /opt/sqldeveloper/sqldeveloper.sh&#xA;Icon=/home/floris/Downloads/icon.png&#xA;StartupNotify=true&#xA;Terminal=true&#xA;Type=Application&#xA;Categories=Databases&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, when I run this launcher - nothing happens. I have also tried using gksudo -k -u root  but unsuccessful as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone that can help me out?&#xA;It's also worth mentioning that I am running Elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you, in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: If I right click on the launcher and select 'Run as root' the application works fine though... &lt;/p&gt;&#xA;" OwnerUserId="4701" LastEditorUserId="4701" LastEditDate="2016-04-08T17:01:24.540" LastActivityDate="2016-04-11T08:24:21.023" Title="Custom .desktop file, trying to launch a .sh" Tags="|release-freya|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5029" PostTypeId="2" ParentId="5028" CreationDate="2016-04-08T17:44:37.990" Score="0" Body="&lt;p&gt;Try deleting &quot;sudo&quot; in line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=sudo /opt/sqldeveloper/sqldeveloper.sh&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4702" LastActivityDate="2016-04-08T17:44:37.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5030" PostTypeId="2" ParentId="4987" CreationDate="2016-04-08T21:08:07.830" Score="5" Body="&lt;p&gt;Use &lt;strong&gt;&lt;a href=&quot;http://www.libertyzero.com/GEncfsM/&quot; rel=&quot;noreferrer&quot;&gt;Gnome Encfs Manager&lt;/a&gt;&lt;/strong&gt;.  It's not an official elementary app, and it doesn't work from within Files, but it's worked really well for me.  You can have the program launch at startup, or you can just summon it from slingshot whenever you need it.  The interface displays a list of your encrypted stashes, so you don't have to hunt them down.  I like that I can have folders on my computer that are protected by a password so I don't have to worry if someone borrows my computer.&lt;br&gt;&#xA;Be sure to use a strong password for the stashes, if you want to keep them secure.  Also, although Encfs is a really good and convenient way to quickly encrypt certain files or folders, be aware that &lt;a href=&quot;https://defuse.ca/audits/encfs.htm&quot; rel=&quot;noreferrer&quot;&gt;it isn't without flaws&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4703" LastActivityDate="2016-04-08T21:08:07.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5031" PostTypeId="2" ParentId="4961" CreationDate="2016-04-08T21:26:55.563" Score="3" Body="&lt;p&gt;The feature that you mention is typical of Windows systems to write ASCII characters. The *nix OS's, like &lt;em&gt;elementaryOS&lt;/em&gt;, don't use ASCII code. But you can use &lt;strong&gt;UNICODE&lt;/strong&gt;, which it's more extensive than ASCII.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To type an unicode character you must use &lt;code&gt;Ctrl+Shift&lt;/code&gt; followed by the code you can find at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/List_of_Unicode_characters&quot; rel=&quot;nofollow&quot;&gt;List of Unicode characters&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To write them:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make sure you don't have &lt;code&gt;Caps Lock&lt;/code&gt; on.&lt;/li&gt;&#xA;&lt;li&gt;Hold &lt;code&gt;Ctrl&lt;/code&gt; and &lt;code&gt;Shift&lt;/code&gt; keys meanwhile type &lt;code&gt;U&lt;/code&gt;. Now you can see an underline U. &lt;/li&gt;&#xA;&lt;li&gt;Release the keys &lt;code&gt;Ctrl&lt;/code&gt; and &lt;code&gt;Shift&lt;/code&gt;, and type the &lt;em&gt;Unicode&lt;/em&gt; number.&lt;/li&gt;&#xA;&lt;li&gt;Finally, hit &lt;code&gt;Enter&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For example, to write the &quot;Ñ&quot; character, you must use the combination:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ctrl + shift + u + 00D1 + enter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Scratch-text-editor issue:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you use this trick in Scratch, you can't see the underline U, but it works also.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-04-08T22:33:29.780" LastActivityDate="2016-04-08T22:33:29.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5032" PostTypeId="2" ParentId="4961" CreationDate="2016-04-09T00:41:20.287" Score="5" Body="&lt;p&gt;Often this is easier with the &lt;a href=&quot;https://en.wikipedia.org/wiki/Compose_key&quot; rel=&quot;nofollow noreferrer&quot;&gt;compose key&lt;/a&gt;. With the compose key configured you use key combos to produce special characters. For example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;For ë: &lt;kbd&gt;Compose&lt;/kbd&gt; + &lt;kbd&gt;&quot;&lt;/kbd&gt; + &lt;kbd&gt;e&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;For ẽ: &lt;kbd&gt;Compose&lt;/kbd&gt; + &lt;kbd&gt;~&lt;/kbd&gt; + &lt;kbd&gt;e&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;For ô: &lt;kbd&gt;Compose&lt;/kbd&gt; + &lt;kbd&gt;^&lt;/kbd&gt; + &lt;kbd&gt;o&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;For á: &lt;kbd&gt;Compose&lt;/kbd&gt; + &lt;kbd&gt;'&lt;/kbd&gt; + &lt;kbd&gt;a&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Note that you do not have to hold down the compose key; just press each key in order.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To set the compose key&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &quot;System Settings&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Keyboard&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Options&quot;.&lt;/li&gt;&#xA;&lt;li&gt;In the left pane, select &quot;Compose Key Position&quot;&lt;/li&gt;&#xA;&lt;li&gt;In the right pane, choose a key to act as &lt;kbd&gt;Compose&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Original answer from &lt;a href=&quot;https://askubuntu.com/questions/358/how-can-i-type-accentuated-characters-like-%C3%AB&quot;&gt;AskUbuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-04-09T00:41:20.287" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5033" PostTypeId="1" AcceptedAnswerId="5034" CreationDate="2016-04-09T05:06:37.973" Score="1" ViewCount="259" Body="&lt;p&gt;After resuming from sleep , Ethernet doesn't work and requires me to reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to connect to Ethernet after resuming from sleep it tries to connect and after about a minute it disconnects.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a HP Pavilion g7-2269wm&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-10-05T14:57:02.953" Title="Ethernet not working after resuming from sleep" Tags="|networking|hp|ethernet|suspend|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5034" PostTypeId="2" ParentId="5033" CreationDate="2016-04-09T05:06:37.973" Score="1" Body="&lt;p&gt;I found that a work around is to restart the Ethernet driver after resuming from sleep. Use these commands after resuming from sleep&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do it run &lt;code&gt;lspci -k&lt;/code&gt; . The output of the command for me is below&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7640G]&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: radeon&#xA;00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: snd_hda_intel&#xA;00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: xhci_hcd&#xA;00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: xhci_hcd&#xA;00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode]&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: ahci&#xA;00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: ohci-pci&#xA;00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: ehci-pci&#xA;00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: ohci-pci&#xA;00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: ehci-pci&#xA;00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: snd_hda_intel&#xA;00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)&#xA;00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0)&#xA;    Kernel driver in use: pcieport&#xA;00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1)&#xA;    Kernel driver in use: pcieport&#xA;00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0&#xA;00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1&#xA;00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2&#xA;00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3&#xA;    Kernel driver in use: k10temp&#xA;00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4&#xA;00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5&#xA;03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)&#xA;    Subsystem: Hewlett-Packard Company Device 184b&#xA;    Kernel driver in use: rtsx_pci&#xA;04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller (rev 05)&#xA;    Subsystem: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller&#xA;    Kernel driver in use: r8169&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now find your Ethernet controller and its module (driver) name in the command output. For me it is &lt;code&gt;r8169&lt;/code&gt; but yours will be different (unless you have a similar laptop).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run (replace &lt;code&gt;&amp;lt;name&amp;gt;&lt;/code&gt; with the module name like &lt;code&gt;r8169&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod &amp;lt;name&amp;gt;&#xA;sudo modprobe &amp;lt;name&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For me it was (but yours will be different)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod r8169&#xA;sudo modprobe r8169&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will restart the Ethernet kernel module (driver). Now Ethernet should be working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently working on a automated solution which runs on every resume&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-09T05:06:37.973" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5035" PostTypeId="1" CreationDate="2016-04-09T08:04:38.667" Score="1" ViewCount="40" Body="&lt;p&gt;I have a problem with the shortcut for switching the keyboard layout, which is &quot;Alt+Space&quot; as per default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to set it manually for each single session, meaning that right after I boot up Freya the shortcut doesn't do anything and I have to go to the keyboard settings and manually set &quot;Alt+Space&quot; as the shortcut for either &quot;Switch to next layout&quot; or &quot;Switch to previous layout&quot;, depending on which of those was bound to &quot;Alt+Space&quot; in the previous session. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that the shortcut starts working again, but once I reboot the system, Freya seems not to recognize it anymore. Strangely, I never had this problem on my other machine, which also runs Freya.&lt;/p&gt;&#xA;" OwnerUserId="4704" LastActivityDate="2016-04-09T08:04:38.667" Title="Freya &quot;forgets&quot; keyboard shortcut after reboot" Tags="|keyboard|keyboard-shortcuts|keyboard-layout|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5036" PostTypeId="1" CreationDate="2016-04-09T08:56:47.740" Score="0" ViewCount="96" Body="&lt;p&gt;When I place a file in the Desktop folder it dosen't appear on my screens desktop?&lt;/p&gt;&#xA;" OwnerUserId="4705" LastActivityDate="2016-04-13T12:57:58.527" Title="Files Don't Appear on Desktop?" Tags="|desktop|files|app-shortcuts|" AnswerCount="1" CommentCount="0" ClosedDate="2016-04-09T16:01:08.657" ContentLicense="CC BY-SA 3.0" />
  <row Id="5037" PostTypeId="2" ParentId="4987" CreationDate="2016-04-09T09:05:26.210" Score="4" Body="&lt;p&gt;Install seahorse and seahorse-contracts.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;&#xA;sudo apt-get install seahorse seahorse-contracts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I recommend you remove the daily repo after installation to avoid getting updates that may break your system.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4706" LastEditorUserId="3757" LastEditDate="2016-04-09T10:57:32.080" LastActivityDate="2016-04-09T10:57:32.080" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5039" PostTypeId="1" CreationDate="2016-04-09T11:42:44.090" Score="1" ViewCount="53" Body="&lt;p&gt;I used to charge my phone (Moto G3) connecting it to my laptop. It was working fine until I installed an elementary base update last week. My phone no longer gets charged. I thought it was a problem with my cable or USB port(s) or even the phone's port. But it works fine when using a regular charger, or while booted in to windows in the same machine. &lt;/p&gt;&#xA;" OwnerUserId="2674" LastActivityDate="2016-04-09T11:42:44.090" Title="can't charge phone after last elementary base update" Tags="|release-freya|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5040" PostTypeId="2" ParentId="4816" CreationDate="2016-04-09T14:56:54.393" Score="0" Body="&lt;p&gt;I think I found a &lt;a href=&quot;http://www.iasptk.com/ubuntu-fix-broken-package-best-solution/&quot; rel=&quot;nofollow&quot;&gt;solution&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just edited the &lt;strong&gt;&lt;em&gt;/var/lib/dpkg/status&lt;/em&gt;&lt;/strong&gt; file and removed all non-current &lt;strong&gt;&lt;em&gt;linux-image-*&lt;/em&gt;&lt;/strong&gt; without install OK install in status.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I suppose I could/should remove the &lt;strong&gt;&lt;em&gt;kernels&lt;/em&gt;&lt;/strong&gt; themselves from HardDrive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And not least: &lt;strong&gt;&lt;em&gt;WHY&lt;/em&gt;&lt;/strong&gt; did this happen? I've seen it on another &lt;em&gt;Ubuntu&lt;/em&gt;-distro, as well: &lt;a href=&quot;http://www.iasptk.com/ubuntu-fix-broken-package-best-solution/&quot; rel=&quot;nofollow&quot;&gt;GoBangOS&lt;/a&gt;. Bug in the &lt;em&gt;dpkg&lt;/em&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally I get to install things again!    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(At least from terminal - &lt;strong&gt;Software Updater&lt;/strong&gt; &amp;amp; &lt;strong&gt;Software Center&lt;/strong&gt; still ain't launching...)&lt;/p&gt;&#xA;" OwnerUserId="3348" LastEditorUserId="3348" LastEditDate="2016-04-09T15:03:49.507" LastActivityDate="2016-04-09T15:03:49.507" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5041" PostTypeId="2" ParentId="5036" CreationDate="2016-04-09T15:49:41.350" Score="4" Body="&lt;p&gt;There is not a desktop folder in elementary OS, you can't put icons or files in the desktop, all the icons go to the dock bar and the files to your home folder&lt;/p&gt;&#xA;" OwnerUserId="4710" LastEditorUserId="3757" LastEditDate="2016-04-13T12:57:58.527" LastActivityDate="2016-04-13T12:57:58.527" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5042" PostTypeId="2" ParentId="1754" CreationDate="2016-04-09T16:28:47.590" Score="2" Body="&lt;p&gt;The command line 'copy-pasta' method for the impatient:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing'&#xA;gsettings set org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can change to one of the following values&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/dhh2l.png&quot; alt=&quot;possible power settings values&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-04-09T16:28:47.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5043" PostTypeId="1" CreationDate="2016-04-10T00:16:46.890" Score="2" ViewCount="1659" Body="&lt;p&gt;How to install Dropbox in elementary OS? I am getting errors and core dump!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tushar@Inspiron-7537:~$ dropbox start -i&#xA;Starting Dropbox...Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(dropbox:8008): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(dropbox:8008): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;Attempt to unlock mutex that was not locked&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I was also getting &lt;code&gt;Gtk-Message: Failed to load module &quot;canberra-gtk-module&lt;/code&gt; but I managed to remove that error by installing &lt;code&gt;canberra-gtk-module&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4713" LastEditorUserId="3757" LastEditDate="2016-04-10T02:11:02.383" LastActivityDate="2016-04-10T13:21:51.450" Title="How to install Dropbox in elementary OS?" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5045" PostTypeId="1" AcceptedAnswerId="5047" CreationDate="2016-04-10T03:14:25.380" Score="0" ViewCount="1960" Body="&lt;p&gt;Since WiFi icon disappear on wingpanel I'm unable to connect to the new WiFi networks. the connect button on the Network settings also not working, can anyone tell me how to fix the network icon or are there any way to connect to new WiFi networks?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/AseYe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AseYe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Thank you. &lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="3757" LastEditDate="2016-04-10T10:03:18.960" LastActivityDate="2016-04-10T10:03:18.960" Title="WiFi icon on wing panel disappeared" Tags="|wingpanel|wifi|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5046" PostTypeId="2" ParentId="5045" CreationDate="2016-04-10T04:56:27.477" Score="0" Body="&lt;p&gt;This generally happens when the appindicator library fails to load.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try restarting the wingpanel by &lt;code&gt;killall wingpanel&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, try checking if you have &lt;code&gt;indicator-applet&lt;/code&gt; &amp;amp; &lt;code&gt;indicator-application&lt;/code&gt; installed or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you already have them installed, try reinstalling &lt;code&gt;libappindicator&lt;/code&gt; and then log out an back in.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libappindicator3-1 libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For detailed reading: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/288/network-icon-gone-missing-in-wingpanel&quot;&gt;Network icon gone missing&lt;/a&gt; &amp;amp; &lt;a href=&quot;https://askubuntu.com/questions/506824/nm-applet-does-not-work-ubuntu-14-04/586319#586319&quot;&gt;nm-applet does not work&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should also check this: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1161972&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug: No WIFI Icon Up In The Right Corner&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="390" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-10T04:56:27.477" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5047" PostTypeId="2" ParentId="5045" CreationDate="2016-04-10T06:34:51.183" Score="0" Body="&lt;p&gt;Fixed after re-installing the network manager&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall network-manager network-manager-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Read more : &lt;a href=&quot;https://askubuntu.com/questions/577588/wifi-icon-is-not-displayed&quot;&gt;https://askubuntu.com/questions/577588/wifi-icon-is-not-displayed&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-04-10T06:34:51.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5048" PostTypeId="2" ParentId="5043" CreationDate="2016-04-10T07:31:09.610" Score="3" Body="&lt;p&gt;I managed to install Dropbox from Git and running a script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instructions mentioned here: &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4713" LastEditorUserId="4688" LastEditDate="2016-04-10T13:21:51.450" LastActivityDate="2016-04-10T13:21:51.450" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5049" PostTypeId="1" CreationDate="2016-04-10T09:29:34.997" Score="2" ViewCount="219" Body="&lt;p&gt;I've created JavaFX programs with IntelliJIDEA on Freya, and everytime I run them, I get these warning messages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(java:2818): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:2818): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:2818): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:2818): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(java:2818): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So far, they're harmless, and everything works, but I'd like to fix them, just for good measure. I've posted this question here, because it's related to Pantheon, and therefore, elementary OS itself.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-04-10T09:29:34.997" Title="Running JavaFX programs gives error messages" Tags="|programming|" AnswerCount="0" CommentCount="1" ClosedDate="2016-04-21T19:01:21.727" ContentLicense="CC BY-SA 3.0" />
  <row Id="5050" PostTypeId="1" CreationDate="2016-04-10T10:21:11.137" Score="1" ViewCount="99" Body="&lt;p&gt;After trying Elementary Os Freya from my USB on my desktop computer (working perfectly), I installed it, following the installer. But after the first reboot, the graphical interface is completely buggy and doesn't always respond, which kinda prevents me from using it ...&#xA;Is there any know solution for this issue ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Apparently, I just have to log out and in again to make it work ...&lt;/p&gt;&#xA;" OwnerUserId="4715" LastEditorUserId="4715" LastEditDate="2016-04-10T11:45:53.403" LastActivityDate="2016-04-10T11:45:53.403" Title="Interface not responding after fresh install" Tags="|user-interface|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5051" PostTypeId="1" CreationDate="2016-04-10T14:01:56.427" Score="1" ViewCount="313" Body="&lt;p&gt;&lt;strong&gt;System&lt;/strong&gt;: HP Omen 15-5003nl&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SSD:&lt;/strong&gt; SanDisk SD6PP4M-256GB-1006&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SSD Firmware:&lt;/strong&gt; A200906&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Kernel:&lt;/strong&gt; 3.19.0-58-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently upgraded my SSD firmware and it fixed a serious ahcpi freeze bug on Windows partition (&lt;a href=&quot;http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/HP-Omen-system-hangs/td-p/4990788&quot; rel=&quot;nofollow&quot;&gt;http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/HP-Omen-system-hangs/td-p/4990788&lt;/a&gt;).&#xA;Sometimes the system freezed some seconds with Linux OS too, so I hoped to resolve all problems with this new firmware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the contrary, now my dmesg is full of:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;5/4/2016 00:40:26 Dago kernel [ 322.113563] ata5.00: exception Emask 0x10 SAct 0x20000000 SErr 0x50000 action 0xe frozen&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113567] ata5.00: irq_stat 0x00400000, PHY RDY changed&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113569] ata5: SError: { PHYRdyChg CommWake }&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113572] ata5.00: failed command: WRITE FPDMA QUEUED&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113575] ata5.00: cmd 61/48:e8:00:3e:7e/01:00:16:00:00/40 tag 29 ncq 167936 out&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113575] res 40/00:e4:00:f7:32/00:00:19:00:00/40 Emask 0x10 (ATA bus error)&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113577] ata5.00: status: { DRDY }&#xA;5/4/2016 00:40:26 Dago kernel [ 322.113580] ata5: hard resetting link&#xA;5/4/2016 00:40:27 Dago kernel [ 322.838234] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)&#xA;5/4/2016 00:40:27 Dago kernel [ 322.839183] ata5.00: configured for UDMA/33&#xA;5/4/2016 00:40:27 Dago kernel [ 322.839247] ata5: EH complete &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;209 errors in 20minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did a system ssd check and no errors are found.&#xA;This is my smartctl log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.0-040100-generic] (local build)&#xA;Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org&#xA;&#xA;=== START OF INFORMATION SECTION ===&#xA;Device Model:     SanDisk SD6PP4M-256G-1006&#xA;Serial Number:    144042400840&#xA;LU WWN Device Id: 5 001b44 c952d9848&#xA;Firmware Version: A200906&#xA;User Capacity:    256.060.514.304 bytes [256 GB]&#xA;Sector Size:      512 bytes logical/physical&#xA;Rotation Rate:    Solid State Device&#xA;Device is:        Not in smartctl database [for details use: -P showall]&#xA;ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 6&#xA;SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)&#xA;Local Time is:    Tue Apr  5 00:45:00 2016 CEST&#xA;SMART support is: Available - device has SMART capability.&#xA;SMART support is: Enabled&#xA;&#xA;=== START OF READ SMART DATA SECTION ===&#xA;SMART overall-health self-assessment test result: PASSED&#xA;&#xA;General SMART Values:&#xA;Offline data collection status:  (0x82) Offline data collection activity&#xA;                    was completed without error.&#xA;                    Auto Offline Data Collection: Enabled.&#xA;Self-test execution status:      (   0) The previous self-test routine completed&#xA;                    without error or no self-test has ever &#xA;                    been run.&#xA;Total time to complete Offline &#xA;data collection:        (  120) seconds.&#xA;Offline data collection&#xA;capabilities:            (0x53) SMART execute Offline immediate.&#xA;                    Auto Offline data collection on/off support.&#xA;                    Suspend Offline collection upon new&#xA;                    command.&#xA;                    No Offline surface scan supported.&#xA;                    Self-test supported.&#xA;                    No Conveyance Self-test supported.&#xA;                    Selective Self-test supported.&#xA;SMART capabilities:            (0x0003) Saves SMART data before entering&#xA;                    power-saving mode.&#xA;                    Supports SMART auto save timer.&#xA;Error logging capability:        (0x01) Error logging supported.&#xA;                    General Purpose Logging supported.&#xA;Short self-test routine &#xA;recommended polling time:    (   2) minutes.&#xA;Extended self-test routine&#xA;recommended polling time:    (  21) minutes.&#xA;SCT capabilities:          (0x003d) SCT Status supported.&#xA;                    SCT Error Recovery Control supported.&#xA;                    SCT Feature Control supported.&#xA;                    SCT Data Table supported.&#xA;&#xA;SMART Attributes Data Structure revision number: 16&#xA;Vendor Specific SMART Attributes with Thresholds:&#xA;ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE&#xA;  1 Raw_Read_Error_Rate     0x002f   100   100   002    Pre-fail  Always       -       0&#xA;  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0&#xA;  9 Power_On_Hours          0x0032   095   095   ---    Old_age   Always       -       2351&#xA; 12 Power_Cycle_Count       0x0032   100   100   ---    Old_age   Always       -       535&#xA;170 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       0&#xA;171 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0&#xA;172 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       0&#xA;173 Unknown_Attribute       0x0033   099   099   005    Pre-fail  Always       -       154626949121&#xA;174 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       47&#xA;183 Runtime_Bad_Block       0x0032   253   253   ---    Old_age   Always       -       0&#xA;184 End-to-End_Error        0x0033   100   100   097    Pre-fail  Always       -       0&#xA;187 Reported_Uncorrect      0x0032   100   100   ---    Old_age   Always       -       0&#xA;188 Command_Timeout         0x0032   070   002   ---    Old_age   Always       -       870&#xA;190 Airflow_Temperature_Cel 0x0022   051   025   014    Old_age   Always       -       49&#xA;196 Reallocated_Event_Count 0x0032   100   100   ---    Old_age   Always       -       0&#xA;199 UDMA_CRC_Error_Count    0x0032   100   100   ---    Old_age   Always       -       0&#xA;243 Unknown_Attribute       0x0032   100   100   ---    Old_age   Always       -       517979766784&#xA;&#xA;SMART Error Log Version: 1&#xA;No Errors Logged&#xA;&#xA;SMART Self-test log structure revision number 1&#xA;Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error&#xA;# 1  Short offline       Completed without error       00%      2348         -&#xA;# 2  Short offline       Completed without error       00%      2330         -&#xA;# 3  Short offline       Completed without error       00%      2311         -&#xA;# 4  Short offline       Completed without error       00%      2260         -&#xA;# 5  Short offline       Completed without error       00%      2231         -&#xA;# 6  Short offline       Completed without error       00%      2204         -&#xA;# 7  Short offline       Completed without error       00%      2163         -&#xA;# 8  Short offline       Completed without error       00%      2105         -&#xA;# 9  Short offline       Completed without error       00%      2023         -&#xA;#10  Short offline       Completed without error       00%      1995         -&#xA;#11  Short offline       Completed without error       00%      1976         -&#xA;#12  Short offline       Completed without error       00%      1905         -&#xA;#13  Extended offline    Interrupted (host reset)      00%      1894         -&#xA;#14  Short offline       Completed without error       00%      1893         -&#xA;#15  Extended offline    Completed without error       00%      1893         -&#xA;#16  Short offline       Completed without error       00%      1892         -&#xA;#17  Extended offline    Completed without error       00%      1892         -&#xA;#18  Short offline       Completed without error       00%      1891         -&#xA;#19  Extended offline    Completed without error       00%      1891         -&#xA;#20  Short offline       Completed without error       00%      1890         -&#xA;#21  Extended offline    Completed without error       00%      1889         -&#xA;&#xA;SMART Selective self-test log data structure revision number 1&#xA; SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS&#xA;    1        0        0  Not_testing&#xA;    2        0        0  Not_testing&#xA;    3        0        0  Not_testing&#xA;    4        0        0  Not_testing&#xA;    5        0        0  Not_testing&#xA;Selective self-test flags (0x0):&#xA;  After scanning selected spans, do NOT read-scan remainder of disk.&#xA;If Selective self-test is pending on power-up, resume after 0 minute delay.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried several kernels (4.0.5, 4.0.9, 4.1.0, 4.5) without success.&#xA;Should I report this bug somewhere else? Where? Have you some suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1&lt;/strong&gt;: Dmesg errors show only with AC power plug plugged in.&lt;/p&gt;&#xA;" OwnerUserId="4717" LastEditorUserId="4717" LastEditDate="2016-04-13T16:34:44.757" LastActivityDate="2016-04-13T16:34:44.757" Title="Hard resetting link after SSD firmware upgrade" Tags="|hardware|kernel|ssd|" AnswerCount="0" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="5052" PostTypeId="1" CreationDate="2016-04-10T20:56:59.020" Score="-1" ViewCount="35" Body="&lt;p&gt;I can't find what partition it is though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's one labeled EFI system partition and its 260MB and theres another that's a recovery partition thats 845MB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My installation started flashing weirdly so I shut it down and it doesn't give me the option to install alongside Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which is the partition I need to erase?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I installed win2grub (whatever it's called) for some reason and I wanna get rid of that too.&lt;/p&gt;&#xA;" OwnerUserId="4663" LastEditorUserId="4663" LastEditDate="2016-04-10T21:02:43.527" LastActivityDate="2016-04-11T06:42:23.393" Title="My installation failed and I need to get rid of the partition" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5053" PostTypeId="2" ParentId="5052" CreationDate="2016-04-11T06:42:23.393" Score="1" Body="&lt;p&gt;For cases like that, you should always have a flash drive with either &lt;a href=&quot;https://www.system-rescue-cd.org/SystemRescueCd_Homepage&quot; rel=&quot;nofollow&quot;&gt;SystemRescueCd&lt;/a&gt; or &lt;a href=&quot;http://gparted.org/livecd.php&quot; rel=&quot;nofollow&quot;&gt;GParted Live&lt;/a&gt; at hand. Both of these live distros offer nice graphical tools to fix all your partitioning and bootloader problems.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-04-11T06:42:23.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5055" PostTypeId="2" ParentId="5028" CreationDate="2016-04-11T08:24:21.023" Score="1" Body="&lt;p&gt;If you don't need root privileges, try adding quotes and removing &lt;code&gt;sudo&lt;/code&gt;, like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=&quot;/opt/sqldeveloper/sqldeveloper.sh&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, if you need to run it in sudo, I don't know how to achieve that. Maybe create another script, to run your script, or something like that, idk.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-04-11T08:24:21.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5058" PostTypeId="2" ParentId="2191" CreationDate="2016-04-11T14:51:20.183" Score="1" Body="&lt;p&gt;I think this is most likely an issue with &lt;code&gt;glib-networking&lt;/code&gt; as reported in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1833/some-https-websites-give-an-error-with-midori-why-is-this?s=1|0.4370&quot;&gt;another related question&lt;/a&gt; about SSL handshakes failing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try doing a manual connection via the terminal next time this happens using the openssl command as shown below, then share the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;openssl s_client -host mail.myzimbraserver.com -port 443&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-11T14:51:20.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5059" PostTypeId="2" ParentId="4768" CreationDate="2016-04-11T15:03:25.700" Score="1" Body="&lt;p&gt;Okay, I updated the system ram from 4Gb (actually 5Gb, don't ask) to 8Gb and now my test case (load the steam game Ark) provides the same results - it loads in 1min 40 on both ElementaryOS and OpenSUSE. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like OpenSuse just handled 'low memory' conditions better - however now they both have some legroom they're performing the same. &lt;/p&gt;&#xA;" OwnerUserId="4267" LastActivityDate="2016-04-11T15:03:25.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5060" PostTypeId="1" CreationDate="2016-04-11T15:06:05.387" Score="1" ViewCount="255" Body="&lt;p&gt;&lt;strong&gt;Problem:&lt;/strong&gt; Clicking the app-icons does not launch anything.&#xA;I've checked out (and tried some of) these solutions:&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2707/software-center-does-not-open-after-update&quot;&gt;software-center-does-not-open-after-update&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3062/software-center-wont-open&quot;&gt;software-center-wont-open&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1544/cant-open-software-center&quot;&gt;cant-open-software-center&lt;/a&gt;&lt;br&gt;&#xA;But my problem doesn't seem to involve icons, rather:   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ software-center&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-center&quot;, line 25, in &amp;lt;module&amp;gt;&#xA;    from gi.repository import Gtk, GObject&#xA;  File &quot;/usr/lib/python2.7/dist-packages/gi/importer.py&quot;, line 158, in     load_module&#xA;    introspection_module = get_introspection_module(namespace)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/gi/module.py&quot;, line 271, in get_introspection_module&#xA;    module = IntrospectionModule(namespace, version)&#xA;  File &quot;/usr/lib/python2.7/dist-packages/gi/module.py&quot;, line 120, in __init__&#xA;repository.require(namespace, version)&#xA;gi.RepositoryError: Typelib file for namespace 'GdkPixbuf', version '2.0' not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt; Why aren't they lanuching, and &lt;strong&gt;how to fix it&lt;/strong&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed &lt;em&gt;synaptic&lt;/em&gt; and it works.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might be connected to my solved problem: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4816/trouble-with-apt-dpkg-synaptic-linux-image-thing&quot;&gt;Trouble with APT, DPKG, SYNAPTIC. Linux-Image-thing&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is hot :)&lt;/p&gt;&#xA;" OwnerUserId="3348" LastActivityDate="2016-06-15T12:16:40.710" Title="Software Updater &amp; Software Center apps not launching" Tags="|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5062" PostTypeId="2" ParentId="4834" CreationDate="2016-04-11T18:55:55.013" Score="1" Body="&lt;p&gt;Got rid of the duplicates by removing the superflous symlinks in &lt;code&gt;/usr/local/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-04-11T18:55:55.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5065" PostTypeId="1" AcceptedAnswerId="5067" CreationDate="2016-04-12T09:53:20.377" Score="2" ViewCount="394" Body="&lt;p&gt;Ubuntu uses Ubiquity installer to install the OS to a system. Since elementary OS is an ubuntu derivative, which installer does elementary OS uses?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installer that elementary OS uses is stripped down version of Ubiquity as it seemed to me. But I was not able to find the code for what is elementary OS removing from Ubiquity. &#xA;I took a look at &#xA;&lt;em&gt;&lt;a href=&quot;https://code.launchpad.net/elementary/+branches&quot; rel=&quot;nofollow&quot;&gt;https://code.launchpad.net/elementary/+branches&lt;/a&gt;?&lt;/em&gt;&#xA;But I was not able to find where elementary is modifying Ubiquity. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any links will be very helpful. &#xA;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="4730" LastEditorUserId="3757" LastEditDate="2016-04-26T02:57:54.873" LastActivityDate="2016-04-26T02:57:54.873" Title="Which Installler does elementary OS use?" Tags="|system-installation|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5066" PostTypeId="1" CreationDate="2016-04-12T11:07:32.227" Score="0" ViewCount="2908" Body="&lt;p&gt;&lt;a href=&quot;http://www.hostingpics.net/viewer.php?id=470381Capturedu20160412130115.png&quot; rel=&quot;nofollow&quot;&gt;http://www.hostingpics.net/viewer.php?id=470381Capturedu20160412130115.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've accidentally blocked the button, I don't know how.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I tried to launch this command :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output HDMI1 --pos 0x0 --mode 1920x1080 --rate 60&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it's not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does someone know the command to enable the button &quot;Show the same image on all screens&quot;, I don't see on the bottom-left corner of the window ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot !&lt;/p&gt;&#xA;" OwnerUserId="4732" LastEditorUserId="3757" LastEditDate="2016-04-12T11:15:06.420" LastActivityDate="2016-04-12T18:31:42.800" Title="Mirroring screen" Tags="|display|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="5067" PostTypeId="2" ParentId="5065" CreationDate="2016-04-12T11:20:10.733" Score="2" Body="&lt;p&gt;elementary OS uses a forked version Ubiquity which changes branding to elementary OS instead of Ubuntu.The source code should be able on LaunchPad but I could not find it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see that elementary OS uses Ubiquity by typing &lt;code&gt;ubiquity&lt;/code&gt; in a terminal while running from a live USB / CD. This will open the elementary OS installer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT : Daniel Foré commented that the patch for Ubiquity is location on LaunchPad @ &lt;a href=&quot;https://code.launchpad.net/~elementary-os/elementaryos/os-patch-ubiquity-xenial&quot; rel=&quot;nofollow&quot;&gt;https://code.launchpad.net/~elementary-os/elementaryos/os-patch-ubiquity-xenial&lt;/a&gt; (this is for Xenial)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-13T08:32:46.233" LastActivityDate="2016-04-13T08:32:46.233" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5068" PostTypeId="2" ParentId="4661" CreationDate="2016-04-12T14:31:52.157" Score="2" Body="&lt;p&gt;I have 3 suggestions and questions for you. We need to analyze the environment before we fix and come to conclusion. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;After freeze, hard reboot your machine. After that open one console, do a sudo tail -f /var/log/syslog on it continue using your machine for a while and observe when it freezes what message is shown on console window. &lt;/li&gt;&#xA;&lt;li&gt;By any chance do you have bad sectors on your old HDD? &lt;/li&gt;&#xA;&lt;li&gt;We also need to check if your CPU is over heating. We can do that with hddtemp utility. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;First post your reply and we will further debug it.&lt;/p&gt;&#xA;" OwnerUserId="4713" LastActivityDate="2016-04-12T14:31:52.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5069" PostTypeId="1" CreationDate="2016-04-12T15:06:53.860" Score="3" ViewCount="316" Body="&lt;p&gt;Laptop WiFi gets disconnected after about 5 to 10 minutes. WiFi connection works after restarting but again will get disconnected after some time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WiFi hardware used is: Realtek rtl8723be&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have gone through various posts to fix the issue. But I couldn't find any proper solution. Please do help me find the proper solution to the problem.&lt;/p&gt;&#xA;" OwnerUserId="4708" LastEditorUserId="3757" LastEditDate="2016-04-13T08:36:23.407" LastActivityDate="2016-09-18T04:02:36.540" Title="WiFi gets disconnected after 5 to 10 minutes" Tags="|wifi|internet|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5070" PostTypeId="2" ParentId="4956" CreationDate="2016-04-12T16:41:31.293" Score="3" Body="&lt;p&gt;I recommend that you first disable automatic boot repair from a console in Windows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {current} recoveryenabled No&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try now if that has solved your problem. If not, you may have to manually set rEFInd. I had to do it in my Dell pc following the instruccions in the &lt;a href=&quot;http://www.rodsbooks.com/refind/installing.html#manual_renaming&quot; rel=&quot;nofollow&quot;&gt;rEFInd website&lt;/a&gt;, in the &quot;Alternative Naming Options / Renaming Files Manually&quot; section. I'll paste here the instructions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Access your ESP, as described in earlier sections.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for an existing directory called EFI/BOOT or EFI/Microsoft/Boot. If neither of these directories exist, skip the next step. (Note that FAT is case-insensitive, so the name may vary in case.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Rename the existing directory or boot loader file to something else. For &lt;code&gt;EFI/BOOT&lt;/code&gt;, try renaming it to &lt;code&gt;EFI/Oldboot&lt;/code&gt;. For &lt;code&gt;EFI/Microsoft/Boot&lt;/code&gt;, move or rename the &lt;code&gt;bootmgfw.efi&lt;/code&gt; file it contains. For instance, you can move it to &lt;code&gt;EFI/Microsoft&lt;/code&gt;. This will keep the boot loader accessible to rEFInd's menu, while preventing the firmware from launching it automatically.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Rename/move your &lt;code&gt;EFI/refind&lt;/code&gt; directory to &lt;code&gt;EFI/BOOT&lt;/code&gt;. If you're working from &lt;code&gt;EFI/Microsoft/Boot&lt;/code&gt;, you should move the contents of your rEFInd directory to &lt;code&gt;EFI/Microsoft/Boot&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Rename &lt;code&gt;EFI/BOOT/refind_x64.efi&lt;/code&gt; to the name of the boot loader it's replacing—it should become &lt;code&gt;EFI/BOOT/bootx64.efi&lt;/code&gt; or &lt;code&gt;EFI/Microsoft/Boot/bootmgfw.efi&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If that sounds too complicated, and just as a plain-language summary (this may only be valid for some machines. If you don't find some of this directories or files, please read the website instructions):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Access to &lt;code&gt;/boot/efi&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Rename &lt;code&gt;EFI/BOOT to EFI/Oldboot&lt;/code&gt; &lt;/li&gt;&#xA;&lt;li&gt;Move   &lt;code&gt;EFI/Microsoft/Boot/bootmgfw.efi&lt;/code&gt; to &lt;code&gt;EFI/Microsoft/bootmgfw.efi&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Copy   &lt;code&gt;EFI/refind/*&lt;/code&gt; to &lt;code&gt;EFI/Microsoft/Boot/*&lt;/code&gt;  (* means all content)&lt;/li&gt;&#xA;&lt;li&gt;Rename &lt;code&gt;EFI/Microsoft/Boot/refind_x64.efi&lt;/code&gt; to &lt;code&gt;EFI/Microsoft/Boot/bootmgfw.efi&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="3757" LastEditDate="2016-04-15T01:43:41.850" LastActivityDate="2016-04-15T01:43:41.850" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5071" PostTypeId="2" ParentId="5066" CreationDate="2016-04-12T18:31:42.800" Score="3" Body="&lt;p&gt;Windows+P to switch between mirrored and extended mode :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(same shortcut as in Windows ;) )&lt;/p&gt;&#xA;" OwnerUserId="2731" LastActivityDate="2016-04-12T18:31:42.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5072" PostTypeId="1" CreationDate="2016-04-12T19:05:07.013" Score="1" ViewCount="166" Body="&lt;p&gt;elementary's file manager is selecting files like a rectangle. I have switched from windows to elementary OS. In Windows, with presing &lt;kbd&gt;Shift&lt;/kbd&gt; and &lt;kbd&gt;-&gt;&lt;/kbd&gt; (Right) you can select line by line  starting from the left when upper line is selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0,1,2,3,4,5,6&#xA;7,8,9,10,11,12&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But elementary OS selecting is like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1 2 3 4 5 6&#xA;2 x x x x x&#xA;3 x x x x x&#xA;4 x x x x x&#xA;5 x x x x x&#xA;6 x x x x x&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I select files like in Windows?&lt;/p&gt;&#xA;" OwnerUserId="4737" LastEditorUserId="34" LastEditDate="2016-04-14T15:46:43.487" LastActivityDate="2016-09-11T18:44:38.000" Title="File selection with keyboard in file manager" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5073" PostTypeId="2" ParentId="5060" CreationDate="2016-04-12T19:15:34.053" Score="1" Body="&lt;p&gt;The showed error message is about a namespace not found. Try to reinstall it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libgdk-pixbuf2.0-0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-04-16T10:20:07.447" LastActivityDate="2016-04-16T10:20:07.447" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5074" PostTypeId="1" CreationDate="2016-04-12T22:37:14.010" Score="8" ViewCount="4081" Body="&lt;p&gt;I have been struggling with setting up an IPSEC/L2TP based VPN for a couple of days, and I'm leaning towards that it's broken upstream. After running &lt;code&gt;sudo apt-get install l2tp-ipsec-vpn&lt;/code&gt;, the &lt;code&gt;ipsec verify&lt;/code&gt; command shows the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Checking your system to see if IPsec got installed and started correctly: &#xA;Version check and ipsec on-path                                 [OK]&#xA;Linux Openswan U2.6.38/K(no kernel code presently loaded)&#xA;Checking for IPsec support in kernel                            [FAILED]&#xA;SAref kernel support                                        [N/A]&#xA;Checking that pluto is running                                  [FAILED]&#xA;whack: Pluto is not running (no &quot;/var/run/pluto/pluto.ctl&quot;)&#xA;Checking for 'ip' command                                       [OK]&#xA;Checking /bin/sh is not /bin/dash                               [WARNING]&#xA;Checking for 'iptables' command                                 [OK]&#xA;Opportunistic Encryption Support                                [DISABLED]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running &quot;sudo service ipsec start&quot;, this is what &quot;sudo service ipsec status&quot; outputs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;IPsec stopped but... has /var/run/pluto/ipsec.info file!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My guess so far is that ipsec/openswan somehow expects to find pluto in another location and thus is unable to start it. I can start pluto manually with &lt;code&gt;/usr/lib/ipsec/pluto --stderrlog&lt;/code&gt;, but for some reason ipsec can't seem to start it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone succeeded in setting up an ipsec/l2tp vpn in Freya, and in that case, what did you do to make it work?&lt;/p&gt;&#xA;" OwnerUserId="2881" LastEditorUserId="578" LastEditDate="2017-03-02T07:24:49.820" LastActivityDate="2019-10-01T17:42:31.827" Title="Anyone succeeded in setting up an IPSEC/L2TP VPN?" Tags="|release-freya|vpn|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5075" PostTypeId="1" CreationDate="2016-04-13T01:18:50.397" Score="1" ViewCount="31" Body="&lt;p&gt;I have Sleep When Inactive For: DO Not Suspend. While Plugged in set.&#xA;And Turn Screen Off When Inactive For: Never. Set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also accessing these options appears in two different settings screens.&#xA;There is a different settings screen when I access this from the wing panel than when I access it from the &quot;settings&quot; icon.&#xA;I have seen other people mention that they have two settings windows also.&#xA;As far as I remember I did not install the separate &quot;Gnome-Settings&quot; on my own, but I could be wrong.&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2016-04-13T01:18:50.397" Title="Elementary Sleeps/Locks while plugged in" Tags="|settings|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5076" PostTypeId="1" AcceptedAnswerId="5077" CreationDate="2016-04-13T01:22:02.127" Score="2" ViewCount="1147" Body="&lt;p&gt;I'm frequently getting below error message on elementary OS Freya. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Low Disk Space on File System root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;already tried to auto remove, but it didn't work for me  (&lt;code&gt;sudo apt-get autoremove&lt;/code&gt;) . are there any way to increase root capacity manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="3757" LastEditDate="2016-04-13T02:05:25.520" LastActivityDate="2020-02-04T10:56:17.620" Title="Low Disk Space on File System root" Tags="|filesystem|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5077" PostTypeId="2" ParentId="5076" CreationDate="2016-04-13T01:48:10.507" Score="4" Body="&lt;p&gt;Increasing root system is a tricky options and may result in non working OS. Backup your data before you try. If you have free space next to / partition then you can do following. You can boot your system from live USB OS (ex: Ubuntu from USB drive). After that start the gParted program. Select the &quot;/&quot; partition and drag scroller to new size. Click on apply. Reboot your system. This is only possible if you have free space next to &quot;/&quot; or if you manage to create some free space next to &quot;/&quot;.&lt;br&gt;&#xA;I am attaching a screenshot of gParted for you. &lt;a href=&quot;https://i.stack.imgur.com/sq359.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sq359.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4713" LastActivityDate="2016-04-13T01:48:10.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5078" PostTypeId="1" AcceptedAnswerId="5082" CreationDate="2016-04-13T09:18:39.707" Score="2" ViewCount="97" Body="&lt;p&gt;So by default Scratch comes with the option that changes your tabs from being tabs to just spaces. &#xA;Now, this works fine whilst within Scratch, and i'm not arguing the fact that this silly option is on by default, I am of the opinion it shouldn't be.&#xA;This might be a bug in Scratch, but before I go bughunting, I want to see if anyone else had this problem and might have a fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So when i Disable the &quot;Change tabs to spaces&quot; option, it still gives white spaces instead of full tabs. So when i open files with Microsoft word, or even libre office for that matter, the tab index is completely wrong. All my carefully planned tabbin' for nought.&lt;/p&gt;&#xA;" OwnerUserId="2485" LastActivityDate="2016-04-13T15:57:03.073" Title="Scratch &quot;tab&quot; option" Tags="|code|" AnswerCount="1" CommentCount="0" ClosedDate="2016-04-13T16:07:43.463" ContentLicense="CC BY-SA 3.0" />
  <row Id="5080" PostTypeId="2" ParentId="5072" CreationDate="2016-04-13T09:50:22.777" Score="1" Body="&lt;p&gt;You can hold control to select multiple files. (I believe this works in Windows as wel)&#xA;You can also use shift to select consecutive files, though you have to click the little tick at the top of the files.&lt;/p&gt;&#xA;" OwnerUserId="2485" LastActivityDate="2016-04-13T09:50:22.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5081" PostTypeId="1" AcceptedAnswerId="5104" CreationDate="2016-04-13T12:50:55.443" Score="0" ViewCount="439" Body="&lt;p&gt;When clicking the notifications icon in Wingpanel I see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jBzbd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jBzbd.png&quot; alt=&quot;Notifications&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The clear button is gray and I cannot click it. I would like to clear notifications so that the bell icon doesn't show.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried clicking on the notifications and they still don't disappear. &lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="45" LastEditDate="2016-04-16T02:49:38.927" LastActivityDate="2016-04-16T02:49:38.927" Title="How do I clear notifications from the notifications indicator?" Tags="|wingpanel|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5082" PostTypeId="2" ParentId="5078" CreationDate="2016-04-13T15:47:41.053" Score="1" Body="&lt;p&gt;So the problem was with the &quot;Detect Indent&quot; addon. It kept the format of a text file i had made earlier across the entire program. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;close all open tabs&lt;/li&gt;&#xA;&lt;li&gt;Disable the &quot;Detect Indent&quot; addon&lt;/li&gt;&#xA;&lt;li&gt;restart scratch&lt;/li&gt;&#xA;&lt;li&gt;Everything is back to normal, and you can enable the &quot;Detect Indent&quot; &#xA;addon again. It now works fine across documents.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2485" LastEditorUserId="2485" LastEditDate="2016-04-13T15:57:03.073" LastActivityDate="2016-04-13T15:57:03.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5083" PostTypeId="2" ParentId="5069" CreationDate="2016-04-13T19:06:06.217" Score="0" Body="&lt;p&gt;That's a known issue with Realtek wireless card. You must deactivate power management.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try from terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be fwlps=N ips=N&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-13T19:06:06.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5084" PostTypeId="1" CreationDate="2016-04-13T19:17:29.873" Score="-1" ViewCount="439" Body="&lt;p&gt;I installed elementary OS on my HP notebook with an AMD A8. My notebook is heating up and the cooler is fired all the time. What can I do to improve it?&lt;/p&gt;&#xA;" OwnerUserId="4744" LastEditorUserId="3757" LastEditDate="2016-04-14T06:06:11.073" LastActivityDate="2016-04-14T06:06:11.073" Title="AMD A8 HP laptop loud fan" Tags="|system|graphic-drivers|hp|amd|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5085" PostTypeId="1" CreationDate="2016-04-13T22:17:55.323" Score="3" ViewCount="116" Body="&lt;p&gt;I have an automated bash script that I run with the pantheon-terminal -e command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-terminal -e my_script.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At the end of the task, it prints out a summary of the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to have the pantheon-terminal remain open and visible so I can check the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already tested the following solutions, but without results:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; pantheon-terminal -e &quot;my_script.sh ; read&quot;&#xA; pantheon-terminal -e &quot;my_script.sh ; bash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT&lt;br&gt;&#xA;Finally I've found the solution.&lt;br&gt;&#xA;It's enough to insert the follow command at the end of the bash script (without trying to concatenate more commands in the pantheon-terminal -e option): &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;read -p &quot;press any key to exit&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4745" LastEditorUserId="4745" LastEditDate="2016-04-14T11:23:42.290" LastActivityDate="2016-12-02T02:42:22.620" Title="Leave pantheon-terminal open after task is complete" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5086" PostTypeId="2" ParentId="5084" CreationDate="2016-04-14T03:49:00.077" Score="1" Body="&lt;p&gt;Try upgrading to kernel 4.4 by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;wget \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.4.6-wily/linux-headers-4.4.6-040406_4.4.6-040406.201603161231_all.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.4.6-wily/linux-headers-4.4.6-040406-generic_4.4.6-040406.201603161231_i386.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.4.6-wily/linux-image-4.4.6-040406-generic_4.4.6-040406.201603161231_i386.deb&#xA;sudo dpkg -i linux-headers-4.4*.deb linux-image-4.4*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will upgrade the kernel to 4.4. Now reboot so you get the new kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install TLP by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linrunner/tlp&#xA;sudo apt-get update &#xA;sudo apt-get install tlp tlp-rdw&#xA;sudo tlp start&#xA;sudo apt-get install thermald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You may get a black screen on boot sometimes but can be fixed by closing the lid and opening it again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use the power button (press once , do not hold down) to put it to sleep and turn it on again.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-14T06:04:09.543" LastActivityDate="2016-04-14T06:04:09.543" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5087" PostTypeId="1" CreationDate="2016-04-14T07:57:10.330" Score="1" ViewCount="41" Body="&lt;p&gt;This seems to be system wide and only with &quot;elementary right click&quot; windows. So for example, in chromium if you right click, you can still take screenshots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To reproduce:&#xA;1. Open any elementary application (I think only GTK+ Applications have this problem, Need to look into this further)&#xA;2. Right click so you get the right click options menu&#xA;3. Take a sceenshot with prt sc&#xA;4. No screenshot will be taken&lt;/p&gt;&#xA;" OwnerUserId="2485" LastEditorUserId="3757" LastEditDate="2016-05-06T14:31:30.967" LastActivityDate="2016-05-06T14:31:30.967" Title="Screenshot with rightclick" Tags="|screenshot|" AnswerCount="0" CommentCount="2" ClosedDate="2016-04-21T19:38:28.687" ContentLicense="CC BY-SA 3.0" />
  <row Id="5089" PostTypeId="1" AcceptedAnswerId="5092" CreationDate="2016-04-14T13:11:39.800" Score="6" ViewCount="1869" Body="&lt;p&gt;How do I update elementary OS when new versions come out? Is there a setting that does it? Is it &lt;strong&gt;Software and Updates&lt;/strong&gt; that does that? I know it does apps but, I wasn't sure about the OS.&lt;/p&gt;&#xA;" OwnerUserId="4751" LastEditorUserId="3757" LastEditDate="2016-05-16T02:23:36.453" LastActivityDate="2020-04-24T18:52:33.063" Title="How do I update elementary OS when new versions come out?" Tags="|release-freya|settings|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5090" PostTypeId="1" AcceptedAnswerId="5095" CreationDate="2016-04-14T13:33:56.027" Score="-1" ViewCount="74" Body="&lt;p&gt;Someone said in a video that it's currently not supported but, is there a way to put applications on the home screen and not just the dock?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trace&lt;/p&gt;&#xA;" OwnerUserId="4751" LastActivityDate="2016-04-15T01:44:08.740" Title="How do I put applications on the home screen?" Tags="|plank|display|home|" AnswerCount="1" CommentCount="2" FavoriteCount="0" ClosedDate="2016-04-15T01:44:24.223" ContentLicense="CC BY-SA 3.0" />
  <row Id="5092" PostTypeId="2" ParentId="5089" CreationDate="2016-04-14T15:31:28.797" Score="9" Body="&lt;p&gt;For the moment is impossible to upgrade from one version to other, the problem is that they are based in the LTS versions of ubuntu and you can't upgrade from LTS to LTS, I don't know if the elementary team is working in something to solve this problem in the future, but for the moment is not possible to upgrade the system from one release to other directly. One thing you can do is have you &quot;Home&quot; folder in a separated partition, so every time you reinstall the system your files and config are preserved.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-04-14T15:31:28.797" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5093" PostTypeId="1" CreationDate="2016-04-14T17:42:23.493" Score="0" ViewCount="1108" Body="&lt;p&gt;I newbie and have some problem here. I run elementary os freya.&#xA;I installing an application through terminal. but, when installing i get some problem. So i'm close the terminal and reinstalling the app. But i cant. The terminal says &quot;the package not fully installed or deleted.&quot;&#xA;Now i can't install app or update!&#xA;How i fix it?&#xA;I have search &amp;amp; try the solution from other linux but not working.&#xA;I hope you're all can help me and find the solution. Thank you.&#xA;(Sorry for my bad english)&lt;/p&gt;&#xA;" OwnerUserId="4758" LastActivityDate="2018-01-12T19:49:58.797" Title="uninstall application" Tags="|release-freya|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5094" PostTypeId="2" ParentId="5093" CreationDate="2016-04-14T21:59:04.293" Score="0" Body="&lt;p&gt;You probably better install Synaptic, which is a graphical package manager and easier to handle than terminal. Some packages are dependent on others. Synaptic has the option to remove and/or fix broken packages and dependencies, so I'd say give it a try and reinstall using Synaptic. You can install Synaptic via Software Center or terminal using the following commands: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3757" LastEditDate="2016-04-15T02:22:57.897" LastActivityDate="2016-04-15T02:22:57.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5095" PostTypeId="2" ParentId="5090" CreationDate="2016-04-15T01:44:08.740" Score="0" Body="&lt;p&gt;Check out &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9/why-cant-i-place-files-on-the-desktop-by-default-and-how-can-i-get-this-featur&quot;&gt;this question and the first couple of answers&lt;/a&gt;. The short version is that it's not possible by default, and that's by design. Applications live in the &quot;slingshot&quot; menu in the top left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/21/792&quot;&gt;following these instructions&lt;/a&gt;, you can add this feature to Elementary.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-15T01:44:08.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5096" PostTypeId="2" ParentId="5093" CreationDate="2016-04-15T03:09:03.643" Score="2" Body="&lt;p&gt;Unfortunately your question is not clear but I will answer it as per my understanding. I guess you are installing applications with apt-get install command. To fix the issue of &quot;the package not fully installed or deleted.&quot; You need to follow these steps.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The 2nd command should install the dependent packages that you missed in earlier installation. &lt;/p&gt;&#xA;" OwnerUserId="4713" LastEditorUserId="26" LastEditDate="2016-04-21T19:11:06.773" LastActivityDate="2016-04-21T19:11:06.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5097" PostTypeId="1" AcceptedAnswerId="5516" CreationDate="2016-04-15T06:23:15.223" Score="0" ViewCount="839" Body="&lt;p&gt;I have installed elementary OS and Windows 10 alongside. after dividing a partition into two from Windows side, seems like elementary OS unable to mount the partitions on booting. It shows following error message.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;disk drive for mnt/50FE*** is not ready yet or not present. continue to wait ... &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;is it possible to manually un-mount &lt;code&gt;50FE***&lt;/code&gt; partition (after I edit the partition &lt;code&gt;50FE***&lt;/code&gt; partition is not available anymore)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help will be appreciated. Thanks&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="3757" LastEditDate="2016-04-15T07:19:45.760" LastActivityDate="2016-05-21T02:10:05.923" Title="Unable to mount partition on boot" Tags="|boot|disk-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5098" PostTypeId="2" ParentId="5097" CreationDate="2016-04-15T07:18:55.710" Score="0" Body="&lt;p&gt;Boot Windows 10 and then reboot into elementary OS.This will reboot Windows without hybrid shutdown and you should be able to mount the partiton&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-15T07:18:55.710" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="5100" PostTypeId="2" ParentId="4734" CreationDate="2016-04-15T11:40:59.357" Score="0" Body="&lt;p&gt;When powering on your machine, go to the BIOS and look for the &quot;Boot&quot; tab (or something with a similar name). Set the top priority to &quot;USB&quot; (also sometimes called USB-HDD or simply HDD).&lt;/p&gt;&#xA;" OwnerUserId="4753" LastActivityDate="2016-04-15T11:40:59.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5103" PostTypeId="1" CreationDate="2016-04-15T18:27:56.413" Score="1" ViewCount="30" Body="&lt;p&gt;I've been searching how to write in Elementary OS symbols which don't appear on the keyboard, I mean,&quot; £ &quot;, &quot;♣ &quot; , &quot; ♥ &quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used lots of years Windows and they can be written by pressing ALT + (number). For instance ALT + 3 is ♥. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I've tried with the ALT method but it doesn't work. I found on the net that Unicode symbols can be written by Shift + Ctrl + ( u , number), but this doesn't work for me neither.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you tell me how to do it? Thanks a lot in advance.&lt;/p&gt;&#xA;" OwnerUserId="4767" LastActivityDate="2016-04-15T18:27:56.413" Title="Symbols in keyboard" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ClosedDate="2016-04-15T23:36:42.793" ContentLicense="CC BY-SA 3.0" />
  <row Id="5104" PostTypeId="2" ParentId="5081" CreationDate="2016-04-15T18:43:40.750" Score="0" Body="&lt;p&gt;Even if you have 0 new notifications, this indicator will still appear to provide quick access to the applications that make use of it and the associated actions. The indicator's general presence is not an indication of new notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are using the default icons, the styling of the icon will change to indicate new notifications. It is unknown whether the icons you have chosen to use make that same distinction.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-04-15T18:43:40.750" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5106" PostTypeId="1" AcceptedAnswerId="5306" CreationDate="2016-04-15T23:11:37.307" Score="2" ViewCount="5090" Body="&lt;p&gt;Is it possible to change the full disk encryption password after installation?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-08-10T02:50:24.743" LastActivityDate="2018-02-11T17:43:26.627" Title="Changing full disk encryption password" Tags="|disk-management|encryption|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5107" PostTypeId="2" ParentId="4431" CreationDate="2016-04-16T06:40:48.030" Score="1" Body="&lt;p&gt;Don't forget to restart ibus by command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ibus restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find and add Vietnamese layout into ibus:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ibus-setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x1nza.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x1nza.png&quot; alt=&quot;setup&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Final step - add ibus into the system tray:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run this command in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.input-sources sources &quot;[('xkb', 'us'), ('ibus', 'Unikey')]&quot;​&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR install dconf-editor then config it like picture:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jUtY9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jUtY9.png&quot; alt=&quot;dconf-editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enjoy it!&lt;/p&gt;&#xA;" OwnerUserId="4762" LastEditorUserId="4762" LastEditDate="2016-04-16T06:48:21.430" LastActivityDate="2016-04-16T06:48:21.430" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5109" PostTypeId="1" AcceptedAnswerId="5110" CreationDate="2016-04-16T13:03:48.417" Score="3" ViewCount="921" Body="&lt;p&gt;I've had Conky Tomorrow since January, and the temperatures were shown properly. But as you know Yahoo's Weather API isn't free longer (the forecast wasn't show any more), so I got a (free) key in &lt;a href=&quot;http://openweathermap.org/&quot; rel=&quot;nofollow&quot;&gt;http://openweathermap.org/&lt;/a&gt;. I have all the weather forecast in my city, but the problem is that I'm unable to change the commands to adapt the old Conky script to a new one which shows the forecast.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I can see, the comands I have to change are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; ${execi 300 curl -s &quot;CODE OF THE FORECAST IN MY CITY&quot; -o ~/.cache/weather.xml}&#xA; ${font Raleway:size=20}${voffset -40}&#xA; ${goto 16}${execi 300 grep &quot;yweather:condition&quot; ~/.cache/weather.xml | grep -o &quot;temp=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot;}°${font Raleway:weight=Light:size=14}${goto 114}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==2'}°${goto 224}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==3'}°${goto 334}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==4'}°${goto 444}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;high=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==5'}°&#xA;&#xA;  ${font Raleway:weight=Light:size=10}${goto 150}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==2'}°${goto 260}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==3'}°${goto 370}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==4'}°${goto 480}${execi 300 grep &quot;yweather:forecast&quot; ~/.cache/weather.xml | grep -o &quot;low=\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;\&quot;[^\&quot;]*\&quot;&quot; | grep -o &quot;[^\&quot;]*&quot; | awk 'NR==5'}°&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And the information (in xml, but it also can be show in json) that I got is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; &amp;lt;forecast&amp;gt;&#xA; &amp;lt;time from=&quot;2016-04-16T12:00:00&quot; to=&quot;2016-04-16T15:00:00&quot;&amp;gt;&#xA; &amp;lt;symbol number=&quot;500&quot; name=&quot;light rain&quot; var=&quot;10d&quot;/&amp;gt;&#xA; &amp;lt;precipitation unit=&quot;3h&quot; value=&quot;0.11&quot; type=&quot;rain&quot;/&amp;gt;&#xA; &amp;lt;windDirection deg=&quot;245.51&quot; code=&quot;WSW&quot; name=&quot;West-southwest&quot;/&amp;gt;&#xA; &amp;lt;windSpeed mps=&quot;7.71&quot; name=&quot;Moderate breeze&quot;/&amp;gt;&#xA; &amp;lt;temperature unit=&quot;celsius&quot; value=&quot;16.44&quot; min=&quot;16.44&quot; max=&quot;16.44&quot;/&amp;gt;&#xA; &amp;lt;pressure unit=&quot;hPa&quot; value=&quot;990.11&quot;/&amp;gt;&#xA; &amp;lt;humidity value=&quot;83&quot; unit=&quot;%&quot;/&amp;gt;&#xA; &amp;lt;clouds value=&quot;scattered clouds&quot; all=&quot;44&quot; unit=&quot;%&quot;/&amp;gt;&#xA; &amp;lt;/time&amp;gt;&#xA; &amp;lt;time from=&quot;2016-04-16T15:00:00&quot; to=&quot;2016-04-16T18:00:00&quot;&amp;gt;&#xA; &amp;lt;symbol number=&quot;802&quot; name=&quot;scattered clouds&quot; var=&quot;03d&quot;/&amp;gt;&#xA; &amp;lt;precipitation/&amp;gt;&#xA; &amp;lt;windDirection deg=&quot;248.5&quot; code=&quot;WSW&quot; name=&quot;West-southwest&quot;/&amp;gt;&#xA; &amp;lt;windSpeed mps=&quot;6.46&quot; name=&quot;Moderate breeze&quot;/&amp;gt;&#xA; &amp;lt;temperature unit=&quot;celsius&quot; value=&quot;14.31&quot; min=&quot;14.3&quot; max=&quot;14.31&quot;/&amp;gt;&#xA; &amp;lt;pressure unit=&quot;hPa&quot; value=&quot;990.94&quot;/&amp;gt;&#xA; &amp;lt;humidity value=&quot;78&quot; unit=&quot;%&quot;/&amp;gt;&#xA; &amp;lt;clouds value=&quot;scattered clouds&quot; all=&quot;32&quot; unit=&quot;%&quot;/&amp;gt;&#xA; &amp;lt;/time&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, anybody knows how to change the Conky comands?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be extremely helpful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="4767" LastActivityDate="2016-04-25T16:15:33.930" Title="Conky Tomorrow Setup" Tags="|conky|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5110" PostTypeId="2" ParentId="5109" CreationDate="2016-04-16T17:03:22.543" Score="1" Body="&lt;p&gt;From oct 2015 you must use a url curl command like :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://api.openweathermap.org/data/2.5/forecast/daily?q=YOURCITY&amp;amp;APPID={APIKEY}&amp;amp;mode=xml&amp;amp;units=metric&amp;amp;cnt=5&amp;amp;lang=xx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;xx&lt;/code&gt; is your language: en, es, etcetera.&lt;/li&gt;&#xA;&lt;li&gt;The &lt;code&gt;ApiKey&lt;/code&gt; can be obteined signing up. &lt;/li&gt;&#xA;&lt;li&gt;The &lt;code&gt;YOURCITY&lt;/code&gt; variable is the name of your city. It's better to use your CityID.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;More info about API at : &lt;a href=&quot;http://www.openweathermap.org/api&quot; rel=&quot;nofollow&quot;&gt;OpenWeather&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally,  you must change all the variables names obteined with curl to read all the weather conditions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;List of all variables can see at &lt;a href=&quot;http://www.openweathermap.org/current#current_XML&quot; rel=&quot;nofollow&quot;&gt;API Openweather XML output&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see an example at: &lt;a href=&quot;http://www.deviantart.com/art/Conky-Gnow-multilang-505074617&quot; rel=&quot;nofollow&quot;&gt;Conky Gnow&lt;/a&gt;.  Click on &lt;strong&gt;&lt;em&gt;Download&lt;/em&gt;&lt;/strong&gt; link, unzip the file and take a look into &lt;code&gt;.conkyrc&lt;/code&gt; file.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-04-25T16:15:33.930" LastActivityDate="2016-04-25T16:15:33.930" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5111" PostTypeId="2" ParentId="3917" CreationDate="2016-04-16T17:21:16.943" Score="3" Body="&lt;p&gt;You need to install the &lt;code&gt;nvidia-352&lt;/code&gt; package and you need to disable &lt;code&gt;nouveau&lt;/code&gt; (open source driver for Nvidia graphics) in &lt;code&gt;GRUB&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; and log in by entering a username and password. &lt;strong&gt;CAUTION: this will deactivate elementary OS's graphical interface, leaving you with a command line, so read this entire set of instructions first.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Execute following commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install nvidia-352&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The computer will restart. When you get to the GRUB loader screen, select &lt;code&gt;elementary OS&lt;/code&gt; and press the &lt;kbd&gt;E&lt;/kbd&gt; key to edit that boot command.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add &lt;code&gt;nouveau.modeset=0&lt;/code&gt; to the end of the &lt;code&gt;linux&lt;/code&gt; line.  &lt;/li&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;F10&lt;/kbd&gt; to save and boot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4775" LastEditorUserId="26" LastEditDate="2018-12-02T16:37:39.967" LastActivityDate="2018-12-02T16:37:39.967" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="5113" PostTypeId="1" AcceptedAnswerId="5292" CreationDate="2016-04-16T20:51:04.617" Score="2" ViewCount="194" Body="&lt;p&gt;I have a Virtual Box VM of Elementary OS Freya that was moved to a new laptop. The old laptop (Intel Celeron) had integrated Intel Graphics card. New laptop (AMD A8 5550M) has AMD Radeon HD 8550 G card. When I start the VM I get the familiar Elementary e logo, but then some text and the screen does not continue to the desktop. I can switch to tty using CtlAltF1 which presents me with tty login. Login is successful and I can get around the file system. I discovered how to get to the grub menu to modify the parameters but have not a clue what parameters if any will help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I &quot;fix&quot; my broken video configuration to use the AMD drivers and get back to Pantheon? I have no preference regarding open vs. proprietary drivers, I just want my lovely Elementary back. I am very noob to Linux so any useful help is appreciated (including pointers to Ask Ubuntu if that is where I need to be asking).&lt;/p&gt;&#xA;" OwnerUserId="185" LastEditorUserId="3757" LastEditDate="2016-05-05T14:46:08.110" LastActivityDate="2016-05-05T14:46:08.110" Title="elementary OS VM on new laptop and AMD video card, how to change video driver" Tags="|pantheon|amd|radeon|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5114" PostTypeId="1" AcceptedAnswerId="5115" CreationDate="2016-04-16T21:07:09.927" Score="-1" ViewCount="791" Body="&lt;p&gt;I'm trying to build pantheon-mail again and having problems installing the build dependencies using this command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt-get build-dep pantheon-mail&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;E: Unable to find a source package for pantheon-mail&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;deb-src entries in sources.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo grep &quot;deb-src http://us.archive.ubuntu.com/ubuntu/&quot; /etc/apt/sources.list&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty main restricted&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates main restricted&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty universe&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates universe&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-backports main restricted universe multiverse&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-04-16T22:37:47.423" Title="apt-get build-dep command fails for pantheon-mail fails" Tags="|pantheon|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5115" PostTypeId="2" ParentId="5114" CreationDate="2016-04-16T22:37:47.423" Score="2" Body="&lt;p&gt;You must add a repository from &lt;em&gt;elementary OS team&lt;/em&gt; in order to download the source package for pantheon-mail.  Try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open Software and Updates and look for new repository added. Mark line for sources an close. When it ask you to update source.list, accept it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Warning:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Beware of upgrade or dist-upgrade meanwhile you make build-dep.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;When you have finished:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:elementary-os/daily&#xA;sudo apt-get update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To remove the repository. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-16T22:37:47.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5117" PostTypeId="2" ParentId="4823" CreationDate="2016-04-17T02:19:57.090" Score="0" Body="&lt;h1&gt;Guide to installing elementary OS on UEFI using rEFInd by Suici Doga&lt;/h1&gt;&#xA;&#xA;&lt;h3&gt;This is my longest post I have made since it is a full guide&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;These steps have been tested be me on my main laptop and works correctly. My laptop is a HP Pavilion g7 2269wm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be nice if anyone could test if it works on other UEFI PCs (add a comment) &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Preinstallation&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;First you will need to disable automatic boot repair in Windows 10 by running &lt;code&gt;bcdedit /set {current} recoveryenabled No&lt;/code&gt; in a administrator command prompt in Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a elementary OS USB drive using Rufus (&lt;a href=&quot;https://rufus.akeo.ie/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;rufus.akeo.ie&quot;&gt;rufus.akeo.ie&lt;/a&gt;) from your ISO file (download 0.3.2 version from &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;) and go to the advanced startup options (using &lt;strong&gt;SHIFT&lt;/strong&gt; while clicking reboot).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YOwrI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YOwrI.jpg&quot; alt=&quot;win10&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Every Windows user should know how to restart their computer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;br&gt;&#xA;Click &lt;code&gt;Use a device&lt;/code&gt; and then select your elementary OS USB drive.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Installation of elementary OS&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Now select try elementary OS and when it boots open a terminal and type &lt;code&gt;ubiquity -b&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will open the installer without installing GRUB2 (we're using rEFInd). Now install elementary OS like you normally would.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how I partitioned mine (bold partitions are for elementary OS , italics are shared (my NTFS storage))&#xA;&lt;code&gt;&#xA;sda                                8:0    0 465.8G  0 disk &#xA;|-sda1                             8:1    0   450M  0 part &#xA;|-sda2                             8:2    0   100M  0 part /boot/efi&#xA;|-sda3                             8:3    0    16M  0 part &#xA;|-sda4                             8:4    0  67.8G  0 part &#xA;&lt;strong&gt;&lt;em&gt;|-sda5                             8:5    0 297.9G  0 part /mnt/storage&lt;/em&gt;&lt;/strong&gt;&#xA;&lt;strong&gt;|-sda6                             8:6    0  48.8G  0 part /&lt;/strong&gt;&#xA;&lt;strong&gt;|-sda7                             8:7    0  11.7G  0 part [SWAP]&lt;/strong&gt;&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it asks you to reboot &lt;strong&gt;DO NOT REBOOT&lt;/strong&gt; since we have to install rEFInd. If you reboot now you will go to Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now we have to install rEFInd so we can boot elementary OS. Run the following in a terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First we have to mount our ESP (EFI System Partition) partition. For me it was &lt;code&gt;/dev/sda2&lt;/code&gt; so I ran&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount /dev/sda2  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The following commands will download &lt;code&gt;shimx64.efi&lt;/code&gt; (this copy is from my PC , you could use yours if you don't trust me :) and install rEFInd.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /boot/efi/EFI&#xA;sudo mkdir refind&#xA;cd refind&#xA;sudo wget http://suicsoft.com/shim.efi-files/shimx64.efi&#xA;sudo wget http://suicsoft.com/shim.efi-files/MokManager.efi&#xA;sudo apt-add-repository ppa:rodsmith/refind&#xA;sudo apt-get update&#xA;sudo apt-get install refind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you do not have the file &lt;code&gt;ext4_x64.efi&lt;/code&gt; in &lt;code&gt;/boot/efi/EFI/refind/drivers_x64/&lt;/code&gt; or the folder doesn't exist. This downloads the rEFInd ext4 driver (which is hosted on my site , you could also extract it from the rEFInd archive).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir drivers_x64&#xA;cd drivers_x64&#xA;sudo wget http://suicsoft.com/shim.efi-files/ext4_x64.efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will install rEFInd using &lt;code&gt;shimx64.efi&lt;/code&gt; if secure boot is &lt;strong&gt;ON&lt;/strong&gt; so you can boot it.This should also install the rEFInd ext4 driver&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now &lt;strong&gt;REBOOT&lt;/strong&gt; and you should go into Windows 10 (maybe it will boot rEFInd, then select Windows 10).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a administrator command prompt and run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {bootmgr} path \EFI\refind\shimx64.efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the EFI bootloader to rEFInd. Then reboot from Windows and you should see elementary OS in rEFInd and when it boots you get the text boot instead of the e logo.If you get a screen like the following&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Aokk8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Aokk8.png&quot; alt=&quot;mokmanager&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;May rather look cryptic and low level but you only have to do it once&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then use the instructions at &lt;a href=&quot;http://www.rodsbooks.com/refind/secureboot.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.rodsbooks.com/refind/secureboot.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable the e logo run the following in a terminal in elementary OS&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkrlconf&#xA;sudo -i scratch-text-editor /boot/refind_linux.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will generate kernel config and open the file in Scratch (you could also use another text editor).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will look something like (mine is different from yours, &lt;strong&gt;DO NOT COPY&lt;/strong&gt;).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Boot with standard options&quot;  &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90&quot; &#xA;&quot;Boot to single-user mode&quot;    &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90 single&quot;&#xA;&quot;Boot with minimal options&quot;   &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;quiet splash&lt;/code&gt; to the end of the first line within the quotes. It should like something like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Boot with standard options&quot;  &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90 quiet splash&quot; &#xA;&quot;Boot to single-user mode&quot;    &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90 single&quot;&#xA;&quot;Boot with minimal options&quot;   &quot;ro root=UUID=74b57e08-ec17-4371-9d5d-f6270880fb90&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then close the file (Scratch automatically saves) and reboot. You should be able to see the boot logo.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Changing the rEFInd screen resolution&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;By default rEFInd will use a low screen resolution which could make your screen blurry or small (for me it was &lt;code&gt;800x600&lt;/code&gt;. To change it run &lt;code&gt;sudo -i scratch-text-editor /boot/efi/EFI/refind/refind.conf&lt;/code&gt;. Add &lt;code&gt;resolution WIDTH HEIGHT&lt;/code&gt; (for my PC it is &lt;code&gt;resolution 1600 900&lt;/code&gt;). Now reboot and you should see the new resolution.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Theming&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You can use any rEFInd theme with this guide but I will be using Next Theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download Next Theme from &lt;a href=&quot;http://sdbinwiiexe.deviantart.com/art/rEFInd-Next-Theme-407754566&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://sdbinwiiexe.deviantart.com/art/rEFInd-Next-Theme-407754566&lt;/a&gt; and extract it (as root , all the files) to &lt;code&gt;/boot/efi/EFI/refind/&lt;/code&gt;. Then add the line &lt;code&gt;include next-theme/theme.conf&lt;/code&gt; to your &lt;code&gt;refind.conf&lt;/code&gt;.You can also change wallpaper if you do all little bit of web searching (like I did).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the end of this tutorial I ended up with&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qlkKM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qlkKM.jpg&quot; alt=&quot;my laptop refind&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen is not cracked. The wallpaper of rEFInd is :)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Using the following wallpaper I created in GIMP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lvxm5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lvxm5.jpg&quot; alt=&quot;wallaper&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE : I did not mention secure-boot and hybrid shutdown since they did not cause any problems for me. If you are having trouble mounting partitions try disabling hybrid shutdown. If you cannot boot Freya try disabling secure boot.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-04T11:29:27.950" LastActivityDate="2016-05-04T11:29:27.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5118" PostTypeId="5" CreationDate="2016-04-17T04:53:41.520" Score="0" Body="&lt;p&gt;The MacBook is a brand of notebook computers manufactured by Apple Inc. from early 2006 to late 2011, and relaunched in 2015. It replaced the iBook series and 12-inch PowerBook series of notebooks as a part of the Apple-Intel transition from PowerPC&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:35:53.623" LastActivityDate="2016-04-21T18:35:53.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5119" PostTypeId="4" CreationDate="2016-04-17T04:53:41.520" Score="0" Body="Use this tag for questions relating to running elementary OS on a MacBook" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:36:08.077" LastActivityDate="2016-04-21T18:36:08.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5120" PostTypeId="5" CreationDate="2016-04-17T04:57:26.060" Score="0" Body="&lt;p&gt;Graphics are images which could be displayed by a computer such as images, applications, videos and games.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-04-21T18:36:25.110" LastActivityDate="2016-04-21T18:36:25.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5121" PostTypeId="4" CreationDate="2016-04-17T04:57:26.060" Score="0" Body="Use this tag for graphics-related issues in elementary OS" OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:21.993" LastActivityDate="2016-10-09T00:08:21.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5122" PostTypeId="1" CreationDate="2016-04-17T08:20:34.457" Score="1" ViewCount="83" Body="&lt;p&gt;I want to install the latest Konsole on elementary OS. I'm considering adding debian sid to the sources, but I'm not exactly sure how I should go through with this.&lt;/p&gt;&#xA;" OwnerUserId="4783" LastActivityDate="2016-04-17T12:49:29.663" Title="Bleeding Edge Non-elementary OS Packages" Tags="|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5123" PostTypeId="2" ParentId="1950" CreationDate="2016-04-17T10:20:13.850" Score="2" Body="&lt;p&gt;I'd recommend installing Docky instead of Plank (&lt;a href=&quot;https://unix.stackexchange.com/questions/203803/replace-plank-with-docky-in-elementary-os&quot;&gt;https://unix.stackexchange.com/questions/203803/replace-plank-with-docky-in-elementary-os)&lt;/a&gt;. And then enabling the &quot;Mounter&quot; docklet to show what drives are mounted.&lt;/p&gt;&#xA;" OwnerDisplayName="user4784" LastActivityDate="2016-04-17T10:20:13.850" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5124" PostTypeId="2" ParentId="4811" CreationDate="2016-04-17T10:24:04.480" Score="0" Body="&lt;p&gt;Yup, there is. Simply open the Screenshot program and change &quot;Grab after a delay of X seconds&quot;.&lt;/p&gt;&#xA;" OwnerDisplayName="user4784" LastActivityDate="2016-04-17T10:24:04.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5125" PostTypeId="2" ParentId="5122" CreationDate="2016-04-17T12:49:29.663" Score="2" Body="&lt;p&gt;Do not add Debian sid to the sources as this will overwrite all the Freya / Ubuntu packages with Debian sid ones and will break your system.You might be able to find a PPA somewhere though&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-17T12:49:29.663" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5127" PostTypeId="1" CreationDate="2016-04-17T19:01:23.443" Score="1" ViewCount="1181" Body="&lt;p&gt;I seem to be having a problem when I use &lt;code&gt;sudo apt-get update&lt;/code&gt; &amp;amp; &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;.&#xA;(Freya 32bits)&#xA;I get this:- photos enclosed.&lt;a href=&quot;https://i.stack.imgur.com/RaERT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RaERT.png&quot; alt=&quot;Terminal[![Terminal2&quot;&gt;&lt;/a&gt;]&lt;a href=&quot;https://i.stack.imgur.com/HFPex.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;2&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4788" LastEditorUserId="3757" LastEditDate="2016-04-18T02:58:45.320" LastActivityDate="2016-04-20T14:29:47.393" Title="Terminal sudo apt-get update" Tags="|pantheon-terminal|sudo|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5129" PostTypeId="2" ParentId="5109" CreationDate="2016-04-17T21:20:27.410" Score="-1" Body="&lt;p&gt;I finally got Conky Harmattan. Its author has adapted to OpenWeatherMap. It works perfectly.&lt;/p&gt;&#xA;" OwnerUserId="4767" LastActivityDate="2016-04-17T21:20:27.410" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5132" PostTypeId="1" CreationDate="2016-04-18T00:32:12.827" Score="1" ViewCount="527" Body="&lt;p&gt;I just get a new laptop and I can't manage to install Elementary Freya on it.&#xA;Live CD doesn't launch, same for the install process, all I get is some Kernel lines and the process stopped.Ubuntu 16.04 beta get until the live session (only with the option 'AHCI disable' otherwise, same things, kernel lines and process stopped..) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a SSD Samsung M.2 NVMe, and an i7 Skylake + Geforce GTX 950m. Windows 7 is already installed, I want to do a dual boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've check and some people can get through the install procedure by disable the discrete GPU from the BIOS, but I don't have the option on mine (ridiculous...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was thinking maybe recompiling the ISO of Freya with the last linux 4.5 Kernel (because the live cd of Ubuntu 16.04 is running), but I have absolutely no idea how I can do that..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MAny thanks !&lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2016-04-18T00:44:23.447" LastActivityDate="2016-07-25T05:21:03.667" Title="Can't install Freya on SSD NVMe + Nvidia Optimus" Tags="|release-freya|system-installation|nvidia|ssd|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5134" PostTypeId="1" CreationDate="2016-04-18T09:56:53.210" Score="1" ViewCount="68" Body="&lt;p&gt;After successfully compiling the &lt;code&gt;gtk-hello.vala&lt;/code&gt; file from the official elementary OS tutorial, I tried to run the gtk-hello file from terminal with the command &lt;code&gt;./gtk-hello&lt;/code&gt;&#xA;However it never runs because I always get the same error/warning:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (gtk-hello:25080): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-AIV4rkwx0f: Connection refused&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After some quick searching online, I read that some people had this issue with GTK 2.0 but that doesn't seem right to me, since I compiled it with the command &lt;code&gt;valac --pkg gtk+-3.0 gtk-hello.vala&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4797" LastEditorUserId="3757" LastEditDate="2016-04-18T13:27:10.817" LastActivityDate="2016-04-18T13:27:10.817" Title="Can't run the gtk-hello app from the elementary OS developer tutorial" Tags="|vala|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5135" PostTypeId="1" AcceptedAnswerId="5155" CreationDate="2016-04-18T13:04:40.893" Score="1" ViewCount="270" Body="&lt;p&gt;Half of the time when I turn on my laptop I get a black screen.&lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; also shows a black screen.I have to put my laptop to sleep and back on to get the screen to work.When my screen is not black I see a message before boot for about a second relating to the radeon driver and then it boots correctly&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running default drivers with kernel 4.4 installed. The laptop is a HP Pavilion g7 2269wm&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;dmesg | grep -i radeon&lt;/code&gt; when screen is &lt;strong&gt;NOT&lt;/strong&gt; black&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    0.194197] smpboot: CPU0: AMD A8-4500M APU with Radeon(tm) HD Graphics (family: 0x15, model: 0x10, stepping: 0x1)&#xA;[    6.062500] [drm] radeon kernel modesetting enabled.&#xA;[    6.080879] fb: switching to radeondrmfb from EFI VGA&#xA;[    6.082067] radeon 0000:00:01.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)&#xA;[    6.082075] radeon 0000:00:01.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF&#xA;[    6.082382] [drm] radeon: 512M of VRAM memory ready&#xA;[    6.082385] [drm] radeon: 1024M of GTT memory ready.&#xA;[    6.082865] [drm] radeon: dpm initialized&#xA;[    6.083172] radeon 0000:00:01.0: Direct firmware load for radeon/TAHITI_vce.bin failed with error -2&#xA;[    6.083181] radeon 0000:00:01.0: radeon_vce: Can't load firmware &quot;radeon/TAHITI_vce.bin&quot;&#xA;[    6.091893] radeon 0000:00:01.0: WB enabled&#xA;[    6.091897] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800355c0c00&#xA;[    6.092713] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001835a18&#xA;[    6.092717] radeon 0000:00:01.0: VCE init error (-22).&#xA;[    6.092723] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000020000c04 and cpu addr 0xffff8800355c0c04&#xA;[    6.092726] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000020000c08 and cpu addr 0xffff8800355c0c08&#xA;[    6.092729] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800355c0c0c&#xA;[    6.092732] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000020000c10 and cpu addr 0xffff8800355c0c10&#xA;[    6.092739] radeon 0000:00:01.0: radeon: MSI limited to 32-bit&#xA;[    6.092910] radeon 0000:00:01.0: radeon: using MSI.&#xA;[    6.093191] [drm] radeon: irq initialized.&#xA;[    7.275570] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[    8.295553] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[    9.315552] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   10.335549] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   11.355546] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   12.375543] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   13.395541] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   14.415540] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   15.435537] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   16.455535] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, trying to reset the ECPU!!!&#xA;[   16.475537] [drm:vce_v1_0_start [radeon]] *ERROR* VCE not responding, giving up!!!&#xA;[   16.475607] [drm:cayman_startup [radeon]] *ERROR* radeon: failed initializing VCE (-1).&#xA;[   16.521446] [drm] radeon atom DIG backlight initialized&#xA;[   16.521450] [drm] Radeon Display Connectors&#xA;[   17.333968] fbcon: radeondrmfb (fb0) is primary device&#xA;[   18.239239] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device&#xA;[   18.306279] [drm] Initialized radeon 2.43.0 20080528 for 0000:00:01.0 on minor 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried &lt;code&gt;nomodeset&lt;/code&gt; . It works but causes the laptop to be slow and heat up&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-25T14:22:54.327" LastActivityDate="2016-04-25T14:22:54.327" Title="Occaisonal black screen on boot AMD A8-4500M laptop" Tags="|release-freya|amd|hp|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5137" PostTypeId="2" ParentId="4995" CreationDate="2016-04-18T23:12:55.493" Score="1" Body="&lt;p&gt;I have the same issue, been searching for a solution for a long time and haven't found any. It's silly, considering the fact that the only problem is Evolution server (which is used by Maya, just as Gnome-calendar and California) using wrong URL for Yahoo calendars.&#xA;The correct URL is &lt;a href=&quot;https://caldav.calendar.yahoo.com/dav/YOUR_USERNAME/Calendar/YOUR_CALENDARNAME&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://caldav.calendar.yahoo.com/dav/YOUR_USERNAME/Calendar/YOUR_CALENDARNAME&lt;/a&gt; and it's working in Lightning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on askubuntu: &lt;a href=&quot;https://askubuntu.com/questions/729585/impossible-to-sync-yahoo-calendars-with-ubuntu&quot;&gt;https://askubuntu.com/questions/729585/impossible-to-sync-yahoo-calendars-with-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4801" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-04-18T23:12:55.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5138" PostTypeId="1" AcceptedAnswerId="5183" CreationDate="2016-04-19T01:55:50.763" Score="1" ViewCount="200" Body="&lt;p&gt;I am already tried looking for my problem in this forum without no lucky, it seems to me just an aesthetics thing but it is a little annoying. I have a gamer keyboard (MadCatz Strike 5), and when it's plugged and I turn the computer on, the system, instead of shows the elementary OS logo, it shows a black screen with 3 &quot;errors&quot; and I couldn't find anything about them. i attached a picture where you will be able too see the screenshot. Do you have any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's important to point, that this black screen only appears when the keyboard is plugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AHa1i.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AHa1i.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4800" LastEditorUserId="3757" LastEditDate="2016-04-19T11:09:09.020" LastActivityDate="2016-04-21T17:33:45.907" Title="Black Screen Error instead elementary OS logo when Madcatz Strike5 Keyboard is pluged" Tags="|boot|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="5139" PostTypeId="1" CreationDate="2016-04-19T03:18:29.773" Score="1" ViewCount="30" Body="&lt;p&gt;I am saddened to say that ElementaryOS is disappointingly slow on a Toshiba A85-S1072 laptop. Even typing has terrible lag,is there anything I can do to speed it up? Every other PC I have installed it on is wicked fast with it installed. Windows XP is faster than this!!! Any tips guys? Not a noob as far as windows goes (Sys Admin Level), but I want to learn more linux and this is a great starter OS.&lt;/p&gt;&#xA;" OwnerUserId="4803" LastActivityDate="2016-04-19T03:18:29.773" Title="Slow (considerable input lag, general slowness)" Tags="|hardware|" AnswerCount="0" CommentCount="2" ClosedDate="2016-04-21T19:01:55.450" ContentLicense="CC BY-SA 3.0" />
  <row Id="5140" PostTypeId="1" CreationDate="2016-04-19T04:14:17.210" Score="1" ViewCount="243" Body="&lt;h2&gt;High Screen Resolution [1280x1024][4:3]&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;i search google and tried to use the screen resolution. above but i failed &#xA;i am newbie to this operating system , usually on windows when update my Graphic Driver {intel} 1280x1024 appear , so how to use this screen resolution or update my VGA &#xA;Currently screen resolution is [1024x768] it's very big for me &lt;/p&gt;&#xA;" OwnerUserId="4804" LastActivityDate="2016-04-19T04:14:17.210" Title="High Screen Resolution [4:3]" Tags="|graphic-drivers|display|resolution|intel|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5141" PostTypeId="1" AcceptedAnswerId="5272" CreationDate="2016-04-19T07:10:31.147" Score="9" ViewCount="1504" Body="&lt;p&gt;Geary crashes after clicking through a few e-mails on the left panel.Not sure why,This hasn't been happening for very long.&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2016-07-27T20:35:40.933" Title="Geary crashing when looking through emails" Tags="|pantheon-mail|crash|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="5142" PostTypeId="1" AcceptedAnswerId="5144" CreationDate="2016-04-19T08:05:11.110" Score="2" ViewCount="3196" Body="&lt;p&gt;I tried to use following command to remove the default Videos application. but it doesn't work, could you help me out? thanks in advice&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge totem&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks &#xA;Yuhua&lt;/p&gt;&#xA;" OwnerUserId="4806" LastEditorUserId="3757" LastEditDate="2016-04-19T11:04:57.607" LastActivityDate="2017-01-15T14:42:37.397" Title="How to uninstall the default Videos application - Freya" Tags="|release-freya|applications|videos|audience|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5143" PostTypeId="1" AcceptedAnswerId="5146" CreationDate="2016-04-19T08:18:59.633" Score="0" ViewCount="884" Body="&lt;p&gt;How can I uninstall the default Camera application in Freya by command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried following commands, but none of them works, could you help me on this. thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge snap&#xA;sudo apt-get purge snap-elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Best regards&#xA;Yuhua&lt;/p&gt;&#xA;" OwnerUserId="4806" LastEditorUserId="3757" LastEditDate="2016-04-19T11:03:25.287" LastActivityDate="2022-06-10T09:24:08.767" Title="How to uninstall the default Camera application - Freya" Tags="|release-freya|applications|camera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5144" PostTypeId="2" ParentId="5142" CreationDate="2016-04-19T10:55:55.393" Score="6" Body="&lt;p&gt;To uninstall the default videos application (audience) run the following in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove audience&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remember to mark as answer if it works&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2017-01-15T14:42:37.397" LastActivityDate="2017-01-15T14:42:37.397" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5145" PostTypeId="1" CreationDate="2016-04-19T11:00:49.287" Score="2" ViewCount="158" Body="&lt;p&gt;I do not want to make pantheon-files my default file manager. First time I launched pantheon-files, I get &lt;em&gt;that&lt;/em&gt; prompt. I clicked 'Ignore' instead of 'Set as Default'. That prompt goes away until the next time I run it. It does not go away as instructed. I wanted to run pantheon-files without being repeatedly asked if I want to set it as default. Thunar is my default file manager.&lt;/p&gt;&#xA;" OwnerUserId="4808" LastActivityDate="2016-05-21T10:19:34.750" Title="How can I disable &quot;Files isn't your default file manager&quot; in Pantheon Files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-25T15:56:37.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="5146" PostTypeId="2" ParentId="5143" CreationDate="2016-04-19T11:03:08.253" Score="1" Body="&lt;p&gt;To uninstall the default camera application (snap) run the following in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove snap-photobooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remember to mark as answer if it works&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-19T11:03:08.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5147" PostTypeId="2" ParentId="5127" CreationDate="2016-04-19T12:16:43.140" Score="1" Body="&lt;p&gt;You have misconfigured your proxy. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to Configuration -&gt; Network -&gt; Proxy settings.  Change the actual value ( Automatic or 192.168.1.2) to &quot;Direct connection to Internet&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save new settings and restart network from terminal with the command :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try apt-get update again&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-19T12:16:43.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5150" PostTypeId="2" ParentId="5132" CreationDate="2016-04-19T18:02:09.673" Score="1" Body="&lt;p&gt;Thanks !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I manage to install Freya, install the latest Nvidia Drivers  for the kernel 3.19 BUT impossible to update to kernel 4.2, 4.4 and 4.5, just got black screen..&#xA;I tried to add nouveau.modeset=0  or nvidia.modeset=0 , nomodeset even modprobe.blacklist=nouveau&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Ubuntu 16.04 beta with the kernel 4.4.0.15 and acpi=off, I can go to the live CD, no boot from Freya with 4.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The wifi is not working either, the card is not recognized, I guess it's fixed with the 4.4 kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm quite running out of option here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT - same result with Nvidia Drivers 364 removed and nouveau.modeset=0&lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2016-04-20T12:39:00.477" LastActivityDate="2016-04-20T12:39:00.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5152" PostTypeId="1" AcceptedAnswerId="5154" CreationDate="2016-04-19T20:45:25.480" Score="-3" ViewCount="18860" Body="&lt;p&gt;I don't want elementary OS on my computer anymore and just want Windows on it. How do I remove elementary OS and wipe the hard drive to put Windows back on via a USB?&lt;/p&gt;&#xA;" OwnerUserId="4751" LastEditorUserId="3757" LastEditDate="2016-04-21T00:28:32.307" LastActivityDate="2016-04-21T16:09:08.397" Title="How do I remove elementary OS and put Windows back on?" Tags="|release-freya|software-installation|microsoft-windows|" AnswerCount="2" CommentCount="6" ClosedDate="2016-04-21T17:58:38.047" ContentLicense="CC BY-SA 3.0" />
  <row Id="5153" PostTypeId="2" ParentId="5138" CreationDate="2016-04-20T06:12:55.263" Score="0" Body="&lt;p&gt;Try installing Linux kernel 4.5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do it run the following in the terminal to download the kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For 32-bit&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;wget \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-headers-4.5.0-040500_4.5.0-040500.201603140130_all.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-headers-4.5.0-040500-generic_4.5.0-040500.201603140130_i386.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-image-4.5.0-040500-generic_4.5.0-040500.201603140130_i386.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For 64-bit&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;wget \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-headers-4.5.0-040500_4.5.0-040500.201603140130_all.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-headers-4.5.0-040500-generic_4.5.0-040500.201603140130_amd64.deb \&#xA;kernel.ubuntu.com/~kernel-ppa/mainline/v4.5-wily/linux-image-4.5.0-040500-generic_4.5.0-040500.201603140130_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then install the kernel (for both 64 and 32)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i linux-headers-4.5*.deb linux-image-4.5*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-20T06:12:55.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5154" PostTypeId="2" ParentId="5152" CreationDate="2016-04-20T06:23:30.377" Score="3" Body="&lt;p&gt;Try using OS Uninstaller if Windows is installed (dual boot).This will remove elementary OS from you hard drive.A tutorial can be found on the Ubuntu Wiki at &lt;a href=&quot;https://help.ubuntu.com/community/OS-Uninstaller&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/OS-Uninstaller&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only have elementary OS installed , just delete all the partitions when you install Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both of these will delete all data on your elementary OS partition.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-20T06:23:30.377" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5155" PostTypeId="2" ParentId="5135" CreationDate="2016-04-20T06:29:26.190" Score="0" Body="&lt;p&gt;My laptop is UEFI so I use rEFInd.The problem was that rEFInd was loading GRUB which caused some issues.I made rEFInd directly boot elementary OS (using EFI Stub) without GRUB and the problem went away.I could also use secure boot now&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-20T06:29:26.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5156" PostTypeId="5" CreationDate="2016-04-20T08:12:27.073" Score="0" Body="&lt;p&gt;The Hewlett-Packard Company (commonly referred to as HP) was an American multinational information technology company headquartered in Palo Alto, California. It developed and provided a wide variety of hardware components as well as software and related services to consumers, small- and medium-sized businesses (SMBs) and large enterprises, including customers in the government, health and education sectors&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:36:16.500" LastActivityDate="2016-04-21T18:36:16.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5157" PostTypeId="4" CreationDate="2016-04-20T08:12:27.073" Score="0" Body="Use this tag for questions relating to running elementary OS on HP computers" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:36:13.983" LastActivityDate="2016-04-21T18:36:13.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5158" PostTypeId="5" CreationDate="2016-04-20T08:14:11.247" Score="0" Body="&lt;p&gt;VAIO Corporation (/ˈvaɪ.oʊ/ standing for Visual Audio Intelligent Organizer), which is headquartered in Azumino Nagano Japan, is a manufacturer of personal computers. VAIO was originally a brand of Sony Corporation, introduced in 1996. Sony sold its PC business to the investment firm Japan Industrial Partners in February 2014 as part of a restructuring of the corporation to focus on mobile devices.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:35:56.280" LastActivityDate="2016-04-21T18:35:56.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5159" PostTypeId="4" CreationDate="2016-04-20T08:14:11.247" Score="0" Body="Use this tag for questions relating to running elementary OS on VAIO computers" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-21T18:36:11.093" LastActivityDate="2016-04-21T18:36:11.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5161" PostTypeId="1" CreationDate="2016-04-20T14:18:28.840" Score="1" ViewCount="101" Body="&lt;p&gt;Today I tried to install elementary OS Freya 0.3.2. When I installed it, all elements of interface were too big, but I installed it with &lt;kbd&gt;TAB&lt;/kbd&gt;+&lt;kbd&gt;ENTER&lt;/kbd&gt;. After rebooting, the type cover keyboard and Wi-Fi didn't work. Can I fix these problems or should wait for the Loki release based on Ubuntu 16.04?&lt;/p&gt;&#xA;" OwnerUserId="4815" LastEditorUserId="5565" LastEditDate="2016-10-06T20:31:55.437" LastActivityDate="2016-10-06T20:31:55.437" Title="Installing Freya on Surface Pro 2" Tags="|release-freya|system-installation|surface-tablet|" AnswerCount="0" CommentCount="2" ClosedDate="2016-10-09T00:22:56.330" ContentLicense="CC BY-SA 3.0" />
  <row Id="5162" PostTypeId="2" ParentId="5127" CreationDate="2016-04-20T14:29:47.393" Score="-1" Body="&lt;p&gt;follow the steps below to fix it :-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open /etc/apt/sources.list file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the word after &lt;a href=&quot;http://security.ubuntu.com/ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://security.ubuntu.com/ubuntu/&lt;/a&gt; in the sources.list file, &#xA;let the word be xyz ..&#xA;Go to the address &lt;a href=&quot;http://security.ubuntu.com/ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://security.ubuntu.com/ubuntu/&lt;/a&gt; and then click on dists. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now check whether xyz is present at this path. If it is not present, then replace xyz with the element which is present in 'dists' such as:- saucy, lucid, trusty etc.Now run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;http://WebCheerz.com&quot; rel=&quot;nofollow&quot;&gt;WebCheerz.com&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3433" LastActivityDate="2016-04-20T14:29:47.393" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5163" PostTypeId="2" ParentId="5069" CreationDate="2016-04-20T14:43:16.463" Score="2" Body="&lt;p&gt;I have that same WiFi card on an HP Pavilion X360. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my laptop wifi was completely broken. I had to blacklist the default &lt;code&gt;acer-wmi&lt;/code&gt; module and install a patched version from: &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow&quot;&gt;https://github.com/lwfinger/rtlwifi_new&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also had to add this line to my &lt;code&gt;/etc/modprobe.d/rtl8723be.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;options rtl8723be ips=N fwlps=N swlps=N swenc=Y disable_watchdog=Y ant_sel=2 msi=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Since your wireless was technically working, unlike mine, but just dropping connections, I wouldn't recommend cloning that github repository.  That's just what got mine working, but adding those options to your &lt;code&gt;rtl8723be.conf&lt;/code&gt; file might help. Just be sure to backup the original version of that file just in case these changes makes things worse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some more information on your laptop would be helpful.&lt;/p&gt;&#xA;" OwnerUserId="4816" LastEditorUserId="3757" LastEditDate="2016-04-21T01:06:21.850" LastActivityDate="2016-04-21T01:06:21.850" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5164" PostTypeId="1" AcceptedAnswerId="5165" CreationDate="2016-04-20T15:53:04.877" Score="1" ViewCount="58" Body="&lt;p&gt;I wish to customize the Elementary OS and deploy it to end user for use, following are two required requirements.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;all end-users' elementary OS version must match the version of original OS which is located in the server. if the version is different from the server, an unattended update will be started in back-end.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;all end-users' setting must match with the setting of original OS which is located in server(except files in tmp), which means there is no personal data in this OS, once any changes are found, a re-image process will be triggered, or the OS in end-user's PC will be re-installed in unattended way. all these process will be triggered automatically.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If I wish to implement above features, what I need to do, any thoughts/ideas? thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="4806" LastEditorUserId="4806" LastEditDate="2016-04-20T16:00:02.943" LastActivityDate="2016-04-20T16:21:41.150" Title="How to implement FRESH update in Freya" Tags="|release-freya|software-installation|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5165" PostTypeId="2" ParentId="5164" CreationDate="2016-04-20T16:21:41.150" Score="1" Body="&lt;p&gt;Netboot the server in ReadOnly and save tmp files to the local disk. Create a &lt;strong&gt;cron job&lt;/strong&gt; that checks if the files in /home/user have changed. If so, format the disk, restart and let it netboot again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Already did something like this in our school with RPIs...&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-20T16:21:41.150" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5169" PostTypeId="1" AcceptedAnswerId="5182" CreationDate="2016-04-20T23:19:01.047" Score="0" ViewCount="51" Body="&lt;p&gt;.ppsx is the extension of MS PowerPoint.&#xA;Is there any program which can open this file type? It is not supported by OpenOffice nor by LibreOffice. The only way I can open it is launching a Windows virtualbox.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-04-21T17:16:19.547" Title=".PPSX file reader?" Tags="|files|office|extensions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5170" PostTypeId="1" AcceptedAnswerId="5185" CreationDate="2016-04-20T23:39:08.663" Score="1" ViewCount="2055" Body="&lt;p&gt;I would really like to take use of Audience. But most of the movies I got on my PC are .mkv files. Is there a way to install the codec I need to play them in Audience? I'm not a great fan of the audio quality in VLC which I'm currently using.&lt;/p&gt;&#xA;" OwnerUserId="4811" LastEditorUserId="4703" LastEditDate="2016-04-21T07:35:39.053" LastActivityDate="2016-04-21T18:02:40.903" Title="Install codec for mkv" Tags="|codec|audience|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5172" PostTypeId="2" ParentId="852" CreationDate="2016-04-21T04:04:48.490" Score="0" Body="&lt;p&gt;Try using  Create elementary OS installer.app to create your bootable USB drive in OSX, it's available here:  &lt;a href=&quot;https://github.com/linusbobcat/create-elementary-os-installer&quot; rel=&quot;nofollow&quot;&gt;https://github.com/linusbobcat/create-elementary-os-installer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="851" LastActivityDate="2016-04-21T04:04:48.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5173" PostTypeId="1" CreationDate="2016-04-21T07:11:14.537" Score="0" ViewCount="762" Body="&lt;p&gt;I'm having some kind of an issue where, eos freya does not detect my 1tb hard drive. I just installed eos and all is well, until i tried to insert my hard disk. I tried inserting my 8GB usb and it was detected. Anyone encountered this issue?&lt;/p&gt;&#xA;" OwnerUserId="4823" LastEditorUserId="3757" LastEditDate="2016-05-06T08:55:07.753" LastActivityDate="2019-08-20T23:02:25.343" Title="1TB External Hard disk is not detected" Tags="|release-freya|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5175" PostTypeId="1" CreationDate="2016-04-21T08:59:26.167" Score="2" ViewCount="272" Body="&lt;p&gt;I use elementary since 2 year (luna, freya) but I really miss a owncloud sync (like google or facebook sync) for files, calendar. An owncloud sync of photos and music whould be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I miss an addressbook (like dexter) and an easy pgp encryption for geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you, Ing.&lt;/p&gt;&#xA;" OwnerUserId="4826" LastActivityDate="2016-08-12T19:41:18.957" Title="Missing owncloud sync and pgp encryption in geary" Tags="|openpgp|" AnswerCount="1" CommentCount="0" ClosedDate="2016-08-16T00:23:50.727" ContentLicense="CC BY-SA 3.0" />
  <row Id="5176" PostTypeId="2" ParentId="5145" CreationDate="2016-04-21T10:08:35.193" Score="2" Body="&lt;p&gt;A quick look at the code indicates that Files does not record whether or not the &quot;Ignore&quot; button was previously pressed so the &quot;Set as Default&quot; option always appears on running if Files is not default. This is, I think, a bug but there is no open report about it on &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt; at the moment that I could find. I suggest you raise such a report.  Perhaps a &quot;Do not ask again&quot; checkbox should be added to the dialog.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-04-21T10:08:35.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5177" PostTypeId="1" CreationDate="2016-04-21T12:20:55.460" Score="2" ViewCount="299" Body="&lt;p&gt;installed yesterday elementary OS to my tablet. Theme is buggy, some buttons and text is missing. I can't change display settings, pressing that button do nothing. Windows does not fit on screen, so I need solution to scale them thinner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I upgrade kernel from 3.19.0-32-generic to 3.19.0-58-generic I lost touchscreen. How to fix this? &lt;strong&gt;edit: I upgrade kernel to 4.4.0-18, touchscreen fixed.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LZIYa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LZIYa.png&quot; alt=&quot;Screenshot 1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5g9J1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5g9J1.png&quot; alt=&quot;Screenshot 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4828" LastEditorUserId="4828" LastEditDate="2016-04-21T14:27:27.730" LastActivityDate="2016-10-09T00:36:03.950" Title="Bay Trail pad and buggy Elementary OS installation" Tags="|settings|themes|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5178" PostTypeId="2" ParentId="4838" CreationDate="2016-04-21T13:48:21.030" Score="0" Body="&lt;p&gt;To answer your questions: freya will not support skylake out of the box you need to manually update the kernel to 4.4 as alex Luxat said.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;graphic cards on laptops are a different piece of cookie :S  because when the nvidia card is using optimus technology it will never work out of the box.&#xA;why because nvidia made it windows only and will &lt;strong&gt;not&lt;/strong&gt; add support in the linux drivers. this technology allows laptop users to either use Intel HD graphics to save battery or use the nvidia card but the video input from the nvidia card is transferd through the intel hd graphics chips. That last part is the hardest part of it. both intel and nvidia need there drivers to be correct and have support. which is not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;some light points on how to use the nvidia chip on your laptop are bumblebee software and optimus software. bumblebee is dead and optimus is still in development but has its bugs. there are some ubuntu 14.04 related tutorials&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;search in google for nvidia optimus on ubuntu 14.04 (elementary os, freya) or 16.04 (elementary os, loki)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;how to install nvidia drivers the right way with optimus. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;my advise is wait a little longer for the new elementary release &quot;loki&quot; because this will have a newer kernel. I don't know if it will be 4.4 or higher. atleast the nvidia drivers and optimus in ubuntu 16.04 are better. in performance and power consumtion &lt;/p&gt;&#xA;" OwnerUserId="94" LastActivityDate="2016-04-21T13:48:21.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5179" PostTypeId="2" ParentId="5007" CreationDate="2016-04-21T14:08:02.143" Score="2" Body="&lt;p&gt;I think i know what you mean. Xubuntu is build with the philosophy to let hardware do nothing. elementary os is build with the philosophy to give users the best experience. elementary's philosophy automatically means it will do alot for the user so the user doesn't have to do anything, other than the feature they want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;everything that is running in the background like sound, bluetooth ect. is running to have the best user experience. but it is true some can be shut down. &lt;strong&gt;disable services will have negative effect on the user experience&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that having said, both world can not exist in one OS there has to be a balance. to my opinion elementary os already has this balance quite good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then here is my question what is your hardware and what are you doing when it feels slow or slower than xubunutu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;because if you doing nothing on xubunut and on elementary os sure elementary os will do more compared to xubuntu but shouldn't feel slow at all. It can also be a graphical thing elementary os uses animations to have seemles overlapping and looks nicer. xubuntu doesn't so can feel static but a bit faster.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;best way to test speed is by benchmarking. try any linux benchmarking on both systems, they will end having points or a core close to each other. when this is true which i think it is. It can only feel a bit slower because we use animations which gently will fade in and out. these animations can be 0.1s till 0.5s which can be noticed as slower &lt;/p&gt;&#xA;" OwnerUserId="94" LastActivityDate="2016-04-21T14:08:02.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5180" PostTypeId="2" ParentId="5152" CreationDate="2016-04-21T16:09:08.397" Score="0" Body="&lt;p&gt;Put in a Windows USB, wipe all partitions and just install Windows.&lt;/p&gt;&#xA;" OwnerUserId="4829" LastActivityDate="2016-04-21T16:09:08.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5182" PostTypeId="2" ParentId="5169" CreationDate="2016-04-21T17:16:19.547" Score="1" Body="&lt;p&gt;Libreoffice Impress &lt;em&gt;(from version 4.1 and above)&lt;/em&gt; supports to open and edit .ppsx files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it from Canonical repository executing from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice-impress&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-21T17:16:19.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5183" PostTypeId="2" ParentId="5138" CreationDate="2016-04-21T17:33:45.907" Score="0" Body="&lt;p&gt;This works for me, pointing that i have Nvidia 960&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 1&#xA;Download and install Kernel 4.0 Packages from&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.0-vivid/&quot; rel=&quot;nofollow&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.0-vivid/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case for x64&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux-headers-4.0.0-040000-generic_4.0.0-040000.201504121935_amd64.deb&#xA;linux-headers-4.0.0-040000_4.0.0-040000.201504121935_all.deb&#xA;linux-image-4.0.0-040000-generic_4.0.0-040000.201504121935_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and install the new kernel&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i linux-headers-4.*.deb linux-image-4.*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And Nvidia last drivers from it official website (you will download as a script i think, so you will have to give it execute permissions with chmod +x)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.nvidia.es/Download/index.aspx?lang=es&quot; rel=&quot;nofollow&quot;&gt;http://www.nvidia.es/Download/index.aspx?lang=es&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 2 Uninstall nvidia's and nouveau's drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For get no errors, i did it in recovery mode, in a console as root, you will need reading and writing permissions&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -o remount,rw /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For some reason when i did that the first time, comand return me an &quot;error&quot;, the second time i wrote the sentence, it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;once i got reading/writting permissions i proceeded to uninstall all drivers&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get remove --purge nvidia*&#xA;apt-get remove --purge xserver-xorg-video-nouveau*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and install the executable file that you downloaded from nvidia offical website, i will put my file name.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/oliver/Download&#xA; ./NVIDIA-Linux-x86_64-361.42.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This way now i can access to TTY console, see the elementary logo and Graphical environtment in full resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But ... the elementary logo looks pixelated, TTY in 600x400 so ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case for some reason i couldn't install rEFInd as user Suici Doga recommend. So i did manually editing /etc/defaul/grub &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and adding &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_GFXMODE=1920x1080  # not &quot;auto&quot;&#xA;GRUB_GFXPAYLOAD_LINUX=keep&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then updating grub&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I read that is important to know what resolutions your monitor and grub support before to editing the grub file, you can do it with hwinfo ... i couldn't install it, i think it was because i spent many hours trying to find de complete solution (you know trial and error).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to user Suici Doga for his help!&lt;/p&gt;&#xA;" OwnerUserId="4800" LastActivityDate="2016-04-21T17:33:45.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5184" PostTypeId="2" ParentId="4592" CreationDate="2016-04-21T17:39:17.353" Score="11" Body="&lt;p&gt;elementary OS releases are made on a task-based cycle and not a time-based cycle. Releases basically happen like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, elementary OS releases are built from Ubuntu repositories. At the beginning of the cycle, we choose a target repository to work from. For Loki, that repo is Ubuntu 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We set up a daily repository where we build our source code against that target repository. Sometimes things build straight away and sometimes builds fail because of things like changing APIs. We find the causes of the build failures and update our source code until everything compiles.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next step is generate daily disk images with our repository and the target (Ubuntu 16.04) repository. We do this using a system called metapackage &quot;Seeds&quot;. It's the same way Ubuntu is built and it's documented in pretty fine detail here: &lt;a href=&quot;https://docs.google.com/document/d/1RPPF14h1Sw2gQjGTuZjUIlNHnGrafS8ekhFjJM9MT00/edit&quot;&gt;https://docs.google.com/document/d/1RPPF14h1Sw2gQjGTuZjUIlNHnGrafS8ekhFjJM9MT00/edit&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is where the real work finally begins. We start compiling a list of all the things we want to get done into a big list of bugs and blueprints that we call a &quot;milestone&quot;. Many of these things are reported and requested to us by our users. So in this way, future releases of elementary OS are directly shaped by user feedback. The first milestone is called &quot;Alpha 1&quot;. Alphas are unstable, internal releases for our development team to track their progress.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on how we decide to do releases, we could have multiple alphas during this phase. There were some pretty big API breaks between Freya and Loki so we had a lot fewer individual package releases. We also made it a goal to reduce the time that this cycle would last since we got a lot of feedback that users wanted faster OS releases. So instead of having multiple Alpha milestones this cycle, we had just one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We then created a milestone &quot;Beta1&quot; which would be the first public testing release of elementary OS. This release needs to represent a somewhat stable and feature complete product, so it needs to contain any serious known regressions or important features. When we release Beta1, it is for developers and testers to help us find any major regressions before we release the stable version of Loki (called GM or Grand Master). The Beta1 milestone represents a kind of &quot;home stretch&quot; where we wrap up big features and get the OS ready for translations, screenshots, and documentation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Typically elementary OS has more than 1 beta as developers and testers help us find major issues that we might have missed in internal testing. Once we're confident we have a shippable product, there's one last milestone series: Release Candidate or &quot;RC&quot;. This milestone is often very small, containing only a handful of minor cosmetic issues. It includes things like preparing our release notes and changing the wallpaper to the new default as well as switching from our unstable daily repository to our stable repository that only contains released software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;RC's often come out just days apart and are the last chance to find any last-minute show-stopping issues. Once an RC is released that the team is happy with, that ISO file gets promoted to &quot;GM&quot;. We upload it to our CDN, make copies available to press, and set the release date for Loki.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-04-21T17:39:17.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5185" PostTypeId="2" ParentId="5170" CreationDate="2016-04-21T18:02:40.903" Score="0" Body="&lt;p&gt;&lt;strong&gt;Audience&lt;/strong&gt; is a gstreamer based video player, so you can reproduced matroska video files with it. To do this you must make sure you have installed enconding/decoding GStreamer libraries. Open a terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --get-selections | grep gstreamer1.0-libav&#xA;dpkg --get-selections | grep libavformat54&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When execute them, you can see an output indicating they are installed, like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JBSJ2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JBSJ2.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to play multiple formats, i should recommend you to install Ubuntu-restricted-extras package. In terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-21T18:02:40.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5186" PostTypeId="1" AcceptedAnswerId="5187" CreationDate="2016-04-22T01:44:29.990" Score="6" ViewCount="482" Body="&lt;p&gt;I just installed Elementary OS on my ASUS laptop.&#xA;The internet (WiFi) seems to stop working (though it shows as connected) after some time of use.&#xA;I have noticed this happens when I haven't booted with the charger plugged. [EDIT: nope, it stops either way]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the power management settings by doing an &lt;code&gt;iwconfig wlan0&lt;/code&gt; and it says power management: off&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea,&#xA;I would really love to use elementary OS, but cannot if the internet does not work :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: On running &lt;code&gt;sudo lshw -C network&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: eth0&#xA;       version: 10&#xA;       serial: 9c:5c:8e:1f:82:c6&#xA;       size: 10Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:47 ioport:4000(size=256) memory:b2104000-b2104fff memory:b2100000-b2103fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: RTL8723BE PCIe Wireless Network Adapter&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: wlan0&#xA;       version: 00&#xA;       serial: c8:ff:28:90:bd:78&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rtl8723be driverversion=3.19.0-58-generic firmware=N/A ip=192.168.2.31 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn&#xA;       resources: irq:19 ioport:3000(size=256) memory:b2000000-b2003fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT:&#xA;Works perfectly fine on Windows (so nothing wrong in the BIOS/hardware)&lt;/p&gt;&#xA;" OwnerUserId="4832" LastEditorUserId="3757" LastEditDate="2016-04-22T13:42:24.460" LastActivityDate="2016-04-22T13:42:24.460" Title="Network shuts down after sometime" Tags="|wifi|internet|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="5187" PostTypeId="2" ParentId="5186" CreationDate="2016-04-22T07:34:16.453" Score="0" Body="&lt;p&gt;The Realtek drivers have so many issues on Ubuntu.  There are some drivers forked by the community, like &quot;&lt;em&gt;rtlwifi_new&lt;/em&gt;&quot; that you can find at &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow noreferrer&quot;&gt;github.com &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install instructions&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-generic build-essential git&#xA;git clone https://github.com/lwfinger/rtlwifi_new.git&#xA;cd rtlwifi_new&#xA;make&#xA;sudo make install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot your system and try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source and more info: &lt;a href=&quot;https://askubuntu.com/questions/590414/wifi-problems-with-rtl8723be-in-ubuntu-14-04&quot;&gt;askubuntu.com&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work, open a terminal and try  &lt;code&gt;echo &quot;options rtl8723be fwlps=0&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&lt;/code&gt; how it's indicated in the link below.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-04-22T10:20:29.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5188" PostTypeId="1" AcceptedAnswerId="5197" CreationDate="2016-04-22T11:34:02.737" Score="0" ViewCount="453" Body="&lt;p&gt;On the &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt; website I see this logo&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ovNI7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ovNI7.png&quot; alt=&quot;elementary OS&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The logo is a SVG file (I had to o convert it) and uses a custom R and Y letter. There is also the boot logo which is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iRoc2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iRoc2.png&quot; alt=&quot;boot logo&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the first one a custom font or a font. And is the other one another font&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-23T06:03:04.483" LastActivityDate="2016-04-23T06:03:04.483" Title="What font does the elementary OS logo use" Tags="|elementary-website|logo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5190" PostTypeId="1" AcceptedAnswerId="5191" CreationDate="2016-04-22T12:32:10.433" Score="5" ViewCount="138" Body="&lt;p&gt;It's &lt;a href=&quot;https://elementaryos.stackexchange.com/a/851/170&quot;&gt;&quot;elementary&quot; and not &quot;Elementary&quot;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But what about eOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VYlCq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VYlCq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.meta.stackexchange.com/q/5/170&quot;&gt;Here&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;eos&quot; is the name of a line of beauty products or Canon cameras. We&#xA;  don't consider this an acceptable way to refer to elementary OS. This&#xA;  is especially important in not encouraging 3rd parties to make brands&#xA;  such as &quot;eRadio&quot; or &quot;eCleaner&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.elementary.io/post/107640994166/the-importance-of-our-brand&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The word “elementary” should be used when referring to the overarching&#xA;  project. “elementary OS” is a product of elementary. The “e” should&#xA;  always be written in lowercase. Don’t use “eOS” as an abbreviation for&#xA;  elementary OS; it sounds a lot like a certain fruity operating system&#xA;  and reminds us of the “KThis” and “GThat” trend.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Why is it necessary to avoid the K/KDE, G/Gnome, i/Intel trend?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-06T02:19:49.707" Title="Is it correct/acceptable to use 'eOS' as an acronym for elementary OS?" Tags="|design|elementary-project|" AnswerCount="1" CommentCount="1" ClosedDate="2016-05-07T10:41:58.303" ContentLicense="CC BY-SA 3.0" />
  <row Id="5191" PostTypeId="2" ParentId="5190" CreationDate="2016-04-22T13:48:52.850" Score="6" Body="&lt;p&gt;No , it is not&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There must be lots of E things like eRadio , eSoft , eFM , eSettings and eLaptop . elementary want to have the elementary brand and not the E brand (if they did want to they would call their apps things like eDesktop (instead of pantheon) and ePhotos).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not acceptable to use it as an achronim for elementary OS since it could mean something else and elementary wants the elementary brand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They also must not be wanting to copy KDE's K things , Intel's i things and GNOME's G things&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-25T13:17:38.890" LastActivityDate="2016-04-25T13:17:38.890" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5192" PostTypeId="2" ParentId="4472" CreationDate="2016-04-22T14:08:52.140" Score="0" Body="&lt;p&gt;In fact the problem was not initially properly identified: it was not about an inability of playing certain formats but that of adding properly files and folders into a playlist by drag&amp;amp;drop from Pantheon Files. The mentioned files that worked (radio stream links) must have been added there in a different way...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add properly the files and play them I have to use the inside options of the player and the Wine file browser&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uQYz9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uQYz9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GBGPS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GBGPS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-04-22T14:08:52.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5193" PostTypeId="1" CreationDate="2016-04-22T15:50:55.340" Score="2" ViewCount="92" Body="&lt;p&gt;I made some customization based elementary OS Freya, to understand each version easily, I wish to version my customization. for example, I wish the end user type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then the output looks like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Linux 3.19.0-39-generic-version.1.0.0.custom&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I achieve this? thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="4806" LastEditorUserId="3757" LastEditDate="2016-04-23T09:21:20.000" LastActivityDate="2016-11-13T20:31:15.123" Title="How to version my customized elementary OS" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5194" PostTypeId="1" CreationDate="2016-04-22T16:39:51.593" Score="2" ViewCount="1463" Body="&lt;p&gt;I'm a new user to elementary freya and am really enjoying it - I have installed it on my HP 350 G2 (it's the only os on the laptop) The issue I'm having is it won't shutdown/restart without me having to press the power button. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have editing the grub file &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&lt;/code&gt; which fixing the shutting down/restart issue completely but it interfered with the sleep function. Once 'nomodeset' had been added the screen didn't wake up after i opened the lid. I've also tried - &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;acpi=noirq acpi=force apm=power_off quiet splash&quot;&lt;/code&gt; which stopped the WiFi working and disabled one of the USB ports. And I've also tried &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash pic=nomsi&quot;&lt;/code&gt; which also seemed to fix the shutting down issue but disabled the 2 other 3.0 usb ports.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would really appreciate it if anyone help me with this line of code to get Elementary to close down cleanly? &lt;/p&gt;&#xA;" OwnerUserId="4836" LastEditorUserId="3757" LastEditDate="2016-04-22T22:19:07.453" LastActivityDate="2016-04-26T15:19:11.973" Title="Elementary freya won't shut down/restart without having to use the power button" Tags="|shutdown|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5195" PostTypeId="2" ParentId="4973" CreationDate="2016-04-22T19:49:25.147" Score="0" Body="&lt;p&gt;Ack!  It was a dumb question.  It supports pretty much the same resolutions as other distributions.  I managed to install and it's running just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was thrown off by a blog post I read earlier about HiDPI screens and resolutions.&lt;/p&gt;&#xA;" OwnerUserId="4668" LastActivityDate="2016-04-22T19:49:25.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5197" PostTypeId="2" ParentId="5188" CreationDate="2016-04-22T22:45:11.680" Score="3" Body="&lt;p&gt;From the brand section at elementary OS webpage:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt; It is a meticulously-designed brand mark, not simply &quot;elementary&quot; written in a specific font.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;More info: &lt;a href=&quot;https://elementary.io/en/brand&quot; rel=&quot;nofollow&quot;&gt;elementary.io Brand&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-22T22:45:11.680" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5198" PostTypeId="2" ParentId="876" CreationDate="2016-04-22T23:25:04.910" Score="6" Body="&lt;p&gt;Heath Paddock has since release an application called &lt;a href=&quot;https://heathpaddock.com/?p=854&quot; rel=&quot;nofollow noreferrer&quot;&gt;multiplank&lt;/a&gt; that does the configuration automatically.&lt;/p&gt;&#xA;&lt;p&gt;To install the app from his PPA:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:heathbar/multiplank&#xA;sudo apt-get update&#xA;sudo apt-get install multiplank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once installed, enable multiplank by issuing the following command:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;multiplank -e&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;And to disable:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;multiplank -d&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="26" LastEditDate="2021-01-01T22:34:54.940" LastActivityDate="2021-01-01T22:34:54.940" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="5199" PostTypeId="2" ParentId="2524" CreationDate="2016-04-23T02:09:13.530" Score="2" Body="&lt;p&gt;Have you tried restarting lightdm?? When you get you screen locked, press &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; and you will enter in console mode, then log in and execute the next command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if nothing happend then press again &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt;  and check for an error message&lt;/p&gt;&#xA;" OwnerUserId="4800" LastEditorUserId="3757" LastEditDate="2016-04-23T11:38:35.530" LastActivityDate="2016-04-23T11:38:35.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5200" PostTypeId="2" ParentId="4411" CreationDate="2016-04-23T02:32:12.607" Score="1" Body="&lt;p&gt;When you are trying to install elementary OS . The system gives you the option between installing automatically with Windows and advanced options where you can do the partitioning. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suppose that you chose the second option, there you can find at the bottom and before you start installation,  an option asking you where you want to install the boot loader, but there you have to choose the disk and partition where you want to install it, try changing &lt;code&gt;/dev/sda&lt;/code&gt; to &lt;code&gt;/dev/sda1&lt;/code&gt; (obviously only if &lt;code&gt;/dev/sda1&lt;/code&gt; is one of the Linux partition, not Windows one)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an example, years ago i was installing Kubuntu and my computer never boot, i put my booteable sd-flash for reinstall but i didn't change the priority boot, and computer finally start, then i realize that i had installed the &quot;start sector&quot; in the sd-flash that was at the instalation &quot; sda &quot;.&lt;/p&gt;&#xA;" OwnerUserId="4800" LastEditorUserId="3757" LastEditDate="2016-04-23T11:43:15.220" LastActivityDate="2016-04-23T11:43:15.220" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5201" PostTypeId="2" ParentId="5132" CreationDate="2016-04-23T02:54:05.087" Score="1" Body="&lt;p&gt;when i was trying to solve a problem i got a problem similar than yours, i had problems installing 4.5 kernel, if you can't do it from freya, download kernel and nvidia linux driver from windows and put them in a pendrive&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Step 1 Download and install Kernel 4.0 Packages from&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.0-vivid/&quot; rel=&quot;nofollow&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.0-vivid/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case for x64&lt;/p&gt;&#xA;&#xA;&lt;p&gt;linux-headers-4.0.0-040000-generic_4.0.0-040000.201504121935_amd64.deb&#xA;linux-headers-4.0.0-040000_4.0.0-040000.201504121935_all.deb&#xA;linux-image-4.0.0-040000-generic_4.0.0-040000.201504121935_amd64.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and install the new kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo dpkg -i linux-headers-4.&lt;em&gt;.deb linux-image-4.&lt;/em&gt;.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And Nvidia last drivers from it official website (you will download as a script i think, so you will have to give it execute permissions with chmod +x)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.nvidia.es/Download/index.aspx?lang=es&quot; rel=&quot;nofollow&quot;&gt;http://www.nvidia.es/Download/index.aspx?lang=es&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If elementary doesn't start, enter in the recovery mode and then in root console, you will need reading and writing permissions&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mount -o remount,rw /&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then install first the kernel 4.0 and reboot and then enter in recovery mode for the kernel 4.0 --&gt; consola as root and uninstall all drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;apt-get remove --purge nvidia*&#xA;apt-get remove --purge xserver-xorg-video-nouveau*&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and install the executable file that you downloaded from nvidia offical website&lt;/p&gt;&#xA;&#xA;&lt;p&gt;./NVIDIA-Linux-x86_64-361.42.run  (in my case)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way now i can access to TTY console, see the elementary logo and Graphical environtment in full resolution.&lt;/p&gt;&#xA;" OwnerUserId="4800" LastActivityDate="2016-04-23T02:54:05.087" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5202" PostTypeId="2" ParentId="3893" CreationDate="2016-04-23T04:03:19.050" Score="1" Body="&lt;p&gt;I have a laptop the same obsolete GPU.It was having artifacts and I could fix it by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install mesa-utils&#xA;sudo mkdir /etc/X11/xorg.conf.d/&#xA;echo -e 'Section &quot;Device&quot;\n Identifier &quot;Intel Graphics&quot;\n Driver &quot;Intel&quot;\n Option &quot;AccelMethod&quot; &quot;sna&quot;\n Option &quot;TearFree&quot; &quot;true&quot;\nEndSection' | sudo tee /etc/X11/xorg.conf.d/20-intel.conf&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-23T04:03:19.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5203" PostTypeId="2" ParentId="28" CreationDate="2016-04-23T04:16:55.277" Score="2" Body="&lt;p&gt;&lt;strong&gt;THIS IS AN UPDATE FROM MY PREVIOUS ANSWER, SINCE A LOT HAVE CHANGED IN ELEMENTARY FREYA&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note that this answer uses ppas, which isn't advisable in a elementaryOS set up. However, to my knowledge, there is not an alternative way to do this. Thus, the instructions.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how I managed to install bumblebee and the nvidia driver in elementary OS. Unfortunately, I am unable to properly install any version higher than nvidia-355. Every attempt to install nvidia official drivers or xorg-edgers drivers or any other driver different from the 355 ended up with black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was helped by the fact that I installed &lt;a href=&quot;http://www.teejeetech.in/p/timeshift.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Timeshift&lt;/a&gt; in my machine. I would strongly encourage everyone to do that before trying to mess with the graphics driver. The funny thing is that I have done several installations of the driver in Ubuntu machines before, for some reason it is a lot harder to do it on elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Only follow this instructions if you can afford losing everything in you machine, do it for your own risk, ok?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run your first backup using &lt;a href=&quot;http://www.teejeetech.in/p/timeshift.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Timemshift&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Install opengl stable ppa &amp;amp; the graphics-drivers ppa&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;For some reason the bumblebee package on the repos do not work properly, the deamon keeps turning off. There is no need to install xorg-edgers ppa anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution I found is to use the opengl+graphics-drivers stable ppas. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa -y&#xA;sudo add-apt-repository ppa:oibaf/graphics-drivers -y&#xA;sudo apt-get update&#xA;sudo apt-get install bumblebee nvidia-355&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you have to make sure the bumblebee.conf is properly set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/bumblebee/bumblebee.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add the modify as follows ( &lt;a href=&quot;https://askubuntu.com/questions/549915/how-to-install-nvidia-drivers-with-bumblebee-on-ubuntu-14-04&quot;&gt;source&lt;/a&gt; ):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[bumblebee] section: after &quot;Driver=&quot; insert &quot;nvidia&quot;&#xA;[nvidia-driver] section: after &quot;KernelDriver=&quot; insert &quot;nvidia-XXX&quot;&#xA;[nvidia-driver] section: after &quot;LibraryPath=&quot; insert &quot;/usr/lib/nvidia-XXX, /usr/lib/nvidia-331-updates:/usr/lib32/nvidia-XXX&quot;&#xA;[nvidia-driver] section: after &quot;XorgModulePath=&quot; insert &quot;/usr/lib/nvidia-XXX/xorg,/usr/lib/xorg/modules&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where XXX is the nvidia driver you have installed, in the example:  nvidia-355&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case, a simple  &lt;code&gt;sudo service bumblebeed restart&lt;/code&gt; did the job, but you may need to restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone managed to install bumblebee with later drivers, please report how you did it in the comments and I may update this answer. It seems that gala won't work with later version in my tests.&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-09T07:52:25.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5205" PostTypeId="1" CreationDate="2016-04-23T10:51:36.100" Score="1" ViewCount="1533" Body="&lt;p&gt;I've tried installing steam using the &lt;code&gt;.deb&lt;/code&gt; file from their webpage and ran into the same problem found &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3899/how-to-install-steam&quot;&gt;here&lt;/a&gt;. I got rid of the problem as described, but when trying to launch steam nothing happens, and I can't even launch it from terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then tried to install it using the command line apt-get (I even tried using aptitude), and although these don't give me any errors, nothing happens when I try run steam.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I purged steam between each attempt, and even deleted the &lt;code&gt;.steam&lt;/code&gt; folder which doesn't seem to delete when steam is purged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the latest Nvidia drivers installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I now get the following when running steam from command line.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ steam&#xA;ILocalize::AddFile() failed to load file &quot;public/steambootstrapper_english.txt&quot;.&#xA;[2016-04-23 12:54:29] Startup - updater built Nov 25 2013 18:07:05&#xA;libGL error: No matching fbConfigs or visuals found&#xA;libGL error: failed to load driver: swrast&#xA;SteamUpdateUI: An X Error occurred&#xA;X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4842" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2018-03-10T21:27:21.967" Title="Steam Installing but not running" Tags="|steam|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5207" PostTypeId="1" CreationDate="2016-04-23T12:06:49.943" Score="1" ViewCount="290" Body="&lt;p&gt;I'm struggling with a few folders in Pantheon Files on Freya which don't keep the sort options I gave them. Especially my Downloads folder. I have to set it to sort its content by date/reverse (so the newest files are on top) every time I open it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This wasn't a problem on Luna, my sort choice was saved and I didn't have to reset it. On Freya my Pictures folder keeps its files sorted by date (not reverse), Documents keeps by name or by type just as I ask it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the Downloads folder doesn't (or rarely more than 2-3 times when I open it). It certainly resets after a reboot, and it also resets in the same session. edit: it resets to 'sort by name'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea why this particular folder doesn't keep its configuration ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;soda.&lt;/p&gt;&#xA;" OwnerUserId="4819" LastActivityDate="2018-03-06T21:50:50.030" Title="How to memorize sort options in folders?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5208" PostTypeId="2" ParentId="2335" CreationDate="2016-04-23T14:41:15.180" Score="1" Body="&lt;p&gt;Well, you can try to use &lt;strong&gt;neoreeps&lt;/strong&gt;'s Kernel (&lt;a href=&quot;https://github.com/neoreeps/surface-pro-3&quot; rel=&quot;nofollow&quot;&gt;https://github.com/neoreeps/surface-pro-3&lt;/a&gt;), but don't expect everything to work.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-23T14:41:15.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5209" PostTypeId="2" ParentId="2472" CreationDate="2016-04-23T14:51:21.047" Score="-2" Body="&lt;p&gt;&lt;s&gt;Maybe GParted will do the job,&lt;/s&gt; but if you don't want to use Webmin, I'm not aware of any other GUIs. Nothing stops you from programming one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GParted is a powerful tool, but it is unsuitable for handling RAID.&lt;/p&gt;&#xA;" OwnerUserId="4531" LastActivityDate="2016-04-23T14:51:21.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5211" PostTypeId="1" CreationDate="2016-04-23T19:12:13.097" Score="2" ViewCount="395" Body="&lt;p&gt;I see that there is built-in support for Wacom, but I wonder if Elementary OS supports tablets for writing (there aren't many distros that I know of support this).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed elementary OS for my grandparents, but realized only after that they can't use the tablet input they're used to anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We're Chinese, and to comfortably type in Chinese with a keyboard requires mastery of Pinyin (the Chinese alphabet), which most elderly people struggle with. Thus they need a tablet that converts their strokes to characters and input them in the system.&lt;/p&gt;&#xA;" OwnerUserId="4834" LastEditorUserId="5565" LastEditDate="2016-10-03T07:26:46.477" LastActivityDate="2016-10-03T07:26:46.477" Title="Does elementary OS support tablet input (for writing)?" Tags="|hardware|input|internationalization|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5213" PostTypeId="1" CreationDate="2016-04-23T22:58:33.620" Score="2" ViewCount="757" Body="&lt;p&gt;I'm quite happy with my elementary installation, it even provides for some casual gaming fun. I just noticed that the next big driver thing on AMD's side is AMDGPU PRO&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In theory this enables the GPU to use OpenCL, OpenGL 4.5 and some propietary AMD optimizations that are supposed to be pretty sweet. As far as I know my R9 270X is a AMDGPU card and should benefit from the improved driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing it, and since Elementary Freya is Ubuntu 14.04 it was pretty simple to get the installer to run. But after installing and rebooting Plank won't show up and it won't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has any experience with installing the driver, is it possible?&lt;/p&gt;&#xA;" OwnerUserId="4845" LastActivityDate="2016-08-24T21:21:25.333" Title="Is it possible to install AMD GPU-PRO on Freya?" Tags="|release-freya|graphic-drivers|amd|proprietary|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5214" PostTypeId="1" CreationDate="2016-04-24T00:26:53.257" Score="2" ViewCount="422" Body="&lt;p&gt;To make touchegg work, the gestures you do on touchpad are associated with an application. Example: &lt;code&gt;touchegg.config&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;application name=&quot;All&quot;&amp;gt;&#xA;        &amp;lt;gesture type=&quot;DRAG&quot; fingers=&quot;1&quot; direction=&quot;ALL&quot;&amp;gt;&#xA;            &amp;lt;action type=&quot;DRAG_AND_DROP&quot;&amp;gt;BUTTON=1&amp;lt;/action&amp;gt;&#xA;        &amp;lt;/gesture&amp;gt;&#xA;        &amp;lt;gesture type=&quot;DRAG&quot; fingers=&quot;3&quot; direction=&quot;RIGHT&quot;&amp;gt;&#xA;            &amp;lt;action type=&quot;SEND_KEYS&quot;&amp;gt;Super+Control+Right&amp;lt;/action&amp;gt;&#xA;        &amp;lt;/gesture&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I want to do is when I am on the desktop and no application is opened I want to change the workspace by dragging 4 fingers left or right. I tried to write &lt;code&gt;&amp;lt;application name=&quot;None&quot;&amp;gt;&lt;/code&gt; but that's not working. Can I do something like that? &lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="3757" LastEditDate="2016-04-24T02:47:49.650" LastActivityDate="2018-07-20T07:10:05.290" Title="Touchegg touchpad control" Tags="|touchpad|workspace|gesture|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5215" PostTypeId="1" AcceptedAnswerId="5219" CreationDate="2016-04-24T03:26:37.567" Score="0" ViewCount="420" Body="&lt;p&gt;My laptop is dual-booting Windows 10 and elementary OS.Windows 10 boots to the desktop (Chrome opens instantly)  in just 20 seconds (including POST which is only 1 sec) while elementary OS Freya takes about one minute and another 3 seconds to open Chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get fast boot times with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a HP Pavilion g7 2269wm with 500GB HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there is a lot of time wasted before the elementary logo (about 5 seconds) with no disk activity.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-25T00:57:34.760" Title="Make elementary OS freya boot in 20 seconds" Tags="|boot|kernel|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5216" PostTypeId="1" CreationDate="2016-04-24T05:27:10.037" Score="2" ViewCount="871" Body="&lt;p&gt;When I try to access my phone (Samsung Galaxy J2) or tablet (Nexus 9 WiFi) from pantheon files I get a message saying &lt;code&gt;Cannot Mount Folder&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fCYSS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fCYSS.png&quot; alt=&quot;cannot mount&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it is also the same with the tablet (Nexus 9). I can access them from Windows and other Linux distros but not from elementary OS&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-09-27T21:28:16.423" LastActivityDate="2016-09-27T21:28:16.423" Title="Cannot access Android device from Pantheon Files (&quot;Unable to Mount Folder&quot;)" Tags="|pantheon-files|android|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5219" PostTypeId="2" ParentId="5215" CreationDate="2016-04-24T14:53:13.587" Score="0" Body="&lt;p&gt;On Windows you probably have fastboot enabled, which uses a sort of hibernation to boot faster.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, those times make sense: in my case elementary OS boots in around 30 seconds, whereas Windows 10 takes around 15 with fastboot (or around a minute without).&lt;/p&gt;&#xA;" OwnerUserId="4490" LastEditorUserId="3757" LastEditDate="2016-04-25T00:57:34.760" LastActivityDate="2016-04-25T00:57:34.760" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5220" PostTypeId="2" ParentId="2397" CreationDate="2016-04-24T19:30:59.327" Score="0" Body="&lt;p&gt;I had a similar problem with my hp deskjet 2540 which I solved the following way:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make sure you have the hplip installed&lt;/li&gt;&#xA;&lt;li&gt;open &lt;code&gt;system-config-printer&lt;/code&gt; from the command line&lt;/li&gt;&#xA;&lt;li&gt;Add the printer again (I called it &quot;Scanner&quot;) and make sure you use the &lt;code&gt;HP JetDirect&lt;/code&gt; Connection not IPP&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Afterwards, I was able to scan even over wifi. Same trick worked on a Mint machine as well.&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-04-24T19:30:59.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5221" PostTypeId="1" AcceptedAnswerId="5222" CreationDate="2016-04-24T21:09:51.780" Score="2" ViewCount="137" Body="&lt;p&gt;from some digging I understand by default Elementary OS uses pantheon-greeter which uses LightDM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to hide the time and date display on the login screen?&lt;/p&gt;&#xA;" OwnerUserId="4851" LastActivityDate="2020-03-31T21:29:30.503" Title="Hide time/date display on login screen" Tags="|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5222" PostTypeId="2" ParentId="5221" CreationDate="2016-04-24T21:11:43.270" Score="1" Body="&lt;p&gt;No, the time and date are hardcoded into the greeter&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="3757" LastEditDate="2016-04-25T07:34:45.823" LastActivityDate="2016-04-25T07:34:45.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5223" PostTypeId="1" CreationDate="2016-04-25T01:59:47.460" Score="3" ViewCount="243" Body="&lt;p&gt;Well, as dumb as it sounds, I was having some trouble with Fish, and decided to uninstall it. The &lt;em&gt;&lt;strong&gt;wrong&lt;/strong&gt;&lt;/em&gt; way. I simply used &lt;code&gt;apt-get remove fish&lt;/code&gt; without using &lt;code&gt;chsh -s /bin/bash&lt;/code&gt; beforehand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So this is now what happens:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Terminal may open, but will hang with a blinking cursor.&lt;/li&gt;&#xA;&lt;li&gt;PS1 will never show.&lt;/li&gt;&#xA;&lt;li&gt;Closing Terminal will log out the current user.&lt;/li&gt;&#xA;&lt;li&gt;Installing another Terminal emulator does not resolve this as those hang as well.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm on the latest version of Freya. How I got to this point is that I discovered that Fish had problems customizing the prompt when using &lt;code&gt;fish_config&lt;/code&gt; on debian versions of it, so it was recommended to uninstall the debian version and use a different one in order to fix this issue. So this is where I uninstalled it without remembering to set bash as the default Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where can I go from here without completely restoring Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="4854" LastEditorUserId="4185" LastEditDate="2016-04-28T00:11:40.640" LastActivityDate="2019-03-06T21:10:03.753" Title="Forgot to set bash as terminal before uninstalling fish" Tags="|release-freya|pantheon-terminal|fish|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5224" PostTypeId="2" ParentId="5223" CreationDate="2016-04-25T05:08:43.980" Score="3" Body="&lt;ul&gt;&#xA;&lt;li&gt;Launch Ubuntu Software Center&lt;/li&gt;&#xA;&lt;li&gt;Reinstall fish &lt;/li&gt;&#xA;&lt;li&gt;Launch terminal and change shell to bash: &lt;code&gt;chsh -s /bin/bash&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;remove fish&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-04-29T00:40:04.590" LastActivityDate="2016-04-29T00:40:04.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5225" PostTypeId="1" AcceptedAnswerId="5234" CreationDate="2016-04-25T06:21:10.990" Score="5" ViewCount="1816" Body="&lt;p&gt;I changed system language and regional settings to United States, top Bar calender shows English only. Yet the lockscreen widget for calender i.e next to log on screen it shows Arabic. Any workarounds?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried updating language using terminal and settings menu. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="4849" LastActivityDate="2016-04-26T05:45:33.950" Title="Cannot change lockscreen Calender widget's language" Tags="|greeter|language|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5226" PostTypeId="2" ParentId="871" CreationDate="2016-04-25T16:19:28.797" Score="1" Body="&lt;h1&gt;OS X&lt;/h1&gt;&#xA;&lt;h2&gt;With Homebrew&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;brew install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Debian&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget http://download.opensuse.org/repositories/shells:fish:release:2/Debian_8.0/Release.key&#xA;apt-key add - &amp;lt; Release.key&#xA;echo 'deb http://download.opensuse.org/repositories/shells:/fish:/release:/2/Debian_8.0/ /' &amp;gt;&amp;gt; /etc/apt/sources.list.d/fish.list&#xA;apt-get update&#xA;apt-get install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Ubuntu&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:fish-shell/release-2&#xA;sudo apt-get update&#xA;sudo apt-get install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;CentOS&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/yum.repos.d/&#xA;wget http://download.opensuse.org/repositories/shells:fish:release:2/CentOS_7/shells:fish:release:2.repo&#xA;yum install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Fedora&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/yum.repos.d/&#xA;wget http://download.opensuse.org/repositories/shells:fish:release:2/Fedora_23/shells:fish:release:2.repo&#xA;yum install fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Arch Linux&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;pacman -S fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Gentoo&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;emerge fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;From source&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -y install git gettext automake autoconf \&#xA;    ncurses-dev build-essential libncurses5-dev&#xA;&#xA;git clone -q --depth 1 https://github.com/fish-shell/fish-shell&#xA;cd fish-shell&#xA;autoreconf &amp;amp;&amp;amp; ./configure&#xA;make &amp;amp;&amp;amp; sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;How do I use fish as my default shell?&lt;/h3&gt;&#xA;&lt;p&gt;Add fish to the list of login shells in /etc/shells and make it your default shell.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;/usr/local/bin/fish&amp;quot; | sudo tee -a /etc/shells&#xA;chsh -s /usr/local/bin/fish&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4861" LastEditorUserId="4861" LastEditDate="2020-11-06T11:10:04.020" LastActivityDate="2020-11-06T11:10:04.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5227" PostTypeId="1" CreationDate="2016-04-25T18:27:16.947" Score="1" ViewCount="536" Body="&lt;p&gt;I am very new to Linux in general and elementary in particular (2-3 days) so this question might be dumb. I do the majority of my work on a second HDMI monitor. In windows, i could resize the display area to 76% so that nothing was hidden behind the edges of the monitor, but i can't seem to understand how to do this in elementary. I've tried xrandr's scale command but it only changes the resolution without allowing me to view the full picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated as it is quite inconvenient. Also, please explain everything as if you were talking to an imbecile because i'm not yet completely comfortable with even the most basic commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="4862" LastEditorUserId="3757" LastEditDate="2016-05-06T11:42:44.167" LastActivityDate="2016-10-12T04:47:58.697" Title="How to resize second monitor display area" Tags="|display|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5228" PostTypeId="1" CreationDate="2016-04-25T18:34:27.773" Score="5" ViewCount="181" Body="&lt;p&gt;I've recently read this article (&lt;a href=&quot;http://www.heise.de/open/meldung/Ubuntu-LTS-Lauter-Sicherheitsluecken-trotz-Langzeitpflege-3181830.html&quot; rel=&quot;nofollow&quot;&gt;http://www.heise.de/open/meldung/Ubuntu-LTS-Lauter-Sicherheitsluecken-trotz-Langzeitpflege-3181830.html&lt;/a&gt; - sorry, it's in German) about Canonical's LTS policies and how there are lots of packages that have a considerably shorter support cycle than the main distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That made me curious about the support status of the packages in my system (freya 0.3.2).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I ran&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;ubuntu-support-status&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;but all the output I got was:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;*****@*****-Inspiron-5559:~$ ubuntu-support-status Traceback (most recent call last):   File &quot;/usr/bin/ubuntu-support-status&quot;, line 133,&#xA;  in &#xA;      pkg.name, support_tag)   File &quot;/usr/bin/ubuntu-support-status&quot;, line 49, in get_maintenance_status&#xA;      raise Exception(&quot;No date tag found&quot;) Exception: No date tag found&#xA;  *****@*****-Inspiron-5559:~$&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Shortly afterwards I got a crash report prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just assumed that the command would work in freya because freya is based on Ubuntu. But apparently it doesn't, so my questions are:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is the command generally supposed to work in freya?&lt;/li&gt;&#xA;&lt;li&gt;If yes, what could be the problem? / If not, how do I figure out the support status of the packages installed in my system?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT Oct 3 2016: output in Loki&lt;/strong&gt;&#xA;In the meantime I've switched to Loki. The output upon running ubuntu-support-status now is as follows:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Traceback (most recent call last):&#xA;    File &quot;/usr/bin/ubuntu-support-status&quot;, line 135, in &#xA;      pkg.name, support_tag)&#xA;    File &quot;/usr/bin/ubuntu-support-status&quot;, line 45, in get_maintenance_status&#xA;      raise Exception(&quot;No Release file found for %s&quot; % pkgname)&#xA;  Exception: No Release file found for accountsservice&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Does this make sense to anyone?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-10-03T15:21:56.440" LastActivityDate="2016-10-03T15:21:56.440" Title="How to show the support status of packages in freya?" Tags="|release-freya|release-loki|software-installation|package-management|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5229" PostTypeId="2" ParentId="5194" CreationDate="2016-04-25T18:47:32.287" Score="1" Body="&lt;p&gt;A quick search has revealed that your laptop has an AMD Radeon R5 M240 graphics card? If that is true, the problem probably is driver related, I had the same problem with an AMD Radeon R5 M335, none of the changes you mentioned would work. I fixed it by activating the proprietary fglrx driver for AMD video cards in the additional drivers tab of the update settings instead of the open source xorg drivers that were activated by default. After that there was no need to make changes to the grub file at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check this post: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4281/dell-inspiron-15-5559-problem-at-shutdown-and-logout-intel-skylake/4354#4354&quot;&gt;Dell Inspiron 15 5559 Problem at shutdown and logout (Intel Skylake)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this sounds familiar to you, you're probably good with activating the mentioned driver.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-04-25T18:47:32.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5230" PostTypeId="1" AcceptedAnswerId="5260" CreationDate="2016-04-26T01:38:33.220" Score="1" ViewCount="1215" Body="&lt;p&gt;How can I clone my current elementary OS installation to a new SSD (or HDD) while keeping all my data and programs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have done a lot of tweaking and I do not want to have to redo it.Also is there any way I can keep the HDD (this is a laptop , maybe replace DVD drive) and configure my elementary OS to use it as the home folder (maybe mount as &lt;code&gt;/home&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-08-06T03:25:22.277" LastActivityDate="2016-08-06T03:25:22.277" Title="How to clone elementary OS to new SSD" Tags="|release-freya|ssd|hdd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5231" PostTypeId="1" CreationDate="2016-04-26T02:14:47.360" Score="4" ViewCount="3067" Body="&lt;p&gt;I'm looking at purchasing a Dell XPS 15 with the Ultra HD display (3840 x 2160), but haven't been able to find any information on whether or not it works with elementary OS, and have a feeling it doesn't. A search on the Ubuntu Desktop certified hardware page says that the XPS 13 works on Ubuntu 14.04, but I get nothing for the XPS 13 on 16.04 (I'm wondering if perhaps the database just hasn't been updated yet, and that this isn't true). This &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/4dl1kw/its_a_community_project_so_making_a_donation/d1skvj7&quot; rel=&quot;nofollow&quot;&gt;thread&lt;/a&gt; on Reddit points out that the XPS 13 (with the Ultra HD display of 3200 x 1800) does in fact work on Freya, but that there remains some work to be done on Gala for it to work at its best (fair enough).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regardless, the Ubuntu Desktop certified hardware page comes up with nothing for the XPS 15, be it on 14.04 or 16.04. I'm not sure what exactly the problem is, but I've read that the hard drive, a Samsung PM951 of the new NVMe type, doesn't work with Linux. If I understand correctly in this &lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2301071&quot; rel=&quot;nofollow&quot;&gt;very long Ubuntu Forums thread&lt;/a&gt;, the XPS 15 with regular HD display (1920 x 1080) can be made to work with &lt;em&gt;a lot&lt;/em&gt; of tweaking (which would be rather daunting for a noob like myself). That being said, that doesn't imply that the XPS 15 with the Ultra HD display would work though. At the same time, I'm wondering if the 4.4 Kernel in Ubuntu 16.04, available in the upcoming Loki release, might fix things a bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ultimately want to use the computer solely with elementary OS, so am wondering if I will have to get the 13 instead of the 15 (as I would like to get that Ultra display, and ideally the 15).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody have any luck, or can shed some light? Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I'm rather Linux and computer-hacking illiterate, so please bear with me as I try and understand any possible answers.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 30/04/2016:&lt;/strong&gt; I finally found a store here in New Zealand that carries Dell computers, and was able to try out the XPS 13, but not the XPS 15. As the XPS 13 seems plenty large enough for me, I'm going to go with that one instead of the XPS 15. That being said, although one of the comments here seems to assert that elementary OS works on the XPS 15, it hasn't been confirmed whether that's the XPS 15 with the i5 cores, or with the 6th generation i7 cores, and that has the QHD 3840 x 2160 screen, which would have different internals that might conflict with elementary OS / Ubuntu. I'll leave the post here for anybody's future reference, and will refrain from accepting an answer until I it's confirmed that elementary OS (be it Freya or Loki) works with the 2015 Dell XPS 15 with QHD display.&lt;/p&gt;&#xA;" OwnerUserId="4844" LastEditorUserId="4844" LastEditDate="2016-04-30T02:10:11.840" LastActivityDate="2020-12-24T08:29:19.583" Title="Does elementary OS work on the Dell XPS 15?" Tags="|system-installation|hardware|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5232" PostTypeId="1" AcceptedAnswerId="5233" CreationDate="2016-04-26T03:06:06.043" Score="2" ViewCount="402" Body="&lt;p&gt;Will elementary OS make lots of snap packages?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does the snap package mean stable OS + new softwares?&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-11-06T09:22:03.510" Title="Does the snap package mean that we don't need to use super old softwares?" Tags="|camera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5233" PostTypeId="2" ParentId="5232" CreationDate="2016-04-26T04:11:22.973" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://developer.ubuntu.com/en/snappy/build-apps/&quot; rel=&quot;nofollow&quot;&gt;https://developer.ubuntu.com/en/snappy/build-apps/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please do refer to this link to have a better idea. I believe it's the new way, similar to windows where one can easily install applications. However the old ways are also going to stick around.&lt;/p&gt;&#xA;" OwnerUserId="4849" LastActivityDate="2016-04-26T04:11:22.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5234" PostTypeId="2" ParentId="5225" CreationDate="2016-04-26T04:53:05.743" Score="4" Body="&lt;h2&gt;GUI method , does not always work&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;strong&gt;Settings&lt;/strong&gt; &gt; &lt;strong&gt;Language and Region&lt;/strong&gt;. You will see something like&#xA;&lt;a href=&quot;https://i.stack.imgur.com/iC4zi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iC4zi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click the unblock button and enter your password. In formats select your correct region and language .It is India (English) for you , I set United States because there isn't a English format for my location and I think that this is a bug with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the &lt;strong&gt;Set System Language&lt;/strong&gt; button and then the &lt;strong&gt;Set Language&lt;/strong&gt; button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Logout and back in to see the changes. Restart to see the changes on the greeter&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Terminal method , always works&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run the following in a terminal&#xA;For your location it is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &quot;LANG=en_IN.utf8&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For my location it is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &quot;LANG=en_LK.utf8&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For other locations modify the command&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-26T05:45:33.950" LastActivityDate="2016-04-26T05:45:33.950" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5235" PostTypeId="1" CreationDate="2016-04-26T08:13:05.027" Score="2" ViewCount="1689" Body="&lt;p&gt;After removing Viber version 5 from software center, and with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --purge viber&#xA;sudo apt-get remove viber&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I downloaded the version 6 viber &lt;code&gt;.deb&lt;/code&gt; file from Viber's website, opened it and installed it with software center.&#xA;When trying to launch Viber I get an &lt;a href=&quot;https://i.stack.imgur.com/ep3D9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;error&lt;/a&gt;.&#xA;And by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/opt/viber/QtWebEngineProcess&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in terminal, i get&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;[0425/170521:FATAL:browser_main_loop.cc(161)] Running without the SUID sandbox! See &lt;a href=&quot;https://code.google.com/p/chromium/wiki/LinuxSUIDSandboxDevelopment&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.google.com/p/chromium/wiki/LinuxSUIDSandboxDevelopment&lt;/a&gt; for more information on developing with the sandbox on.&#xA;  Aborted (core dumped)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;update:&#xA;By running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;opt/viber/Viber&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in terminal i get:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;This application failed to start because it could not find or load the Qt platform plugin &quot;xcb&quot;.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Reinstalling the application may fix this problem.&#xA;  Aborted (core dumped)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4864" LastEditorUserId="4864" LastEditDate="2016-04-28T10:09:59.513" LastActivityDate="2016-04-30T19:58:24.907" Title="Cannot launch Viber on elementary OS freya" Tags="|software-installation|appcenter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5236" PostTypeId="5" CreationDate="2016-04-26T10:33:35.647" Score="0" Body="&lt;p&gt;In computing, a device driver (commonly referred to as a driver) is a computer program that operates or controls a particular type of device that is attached to a computer. A driver provides a software interface to hardware devices, enabling operating systems and other computer programs to access hardware functions without needing to know precise details of the hardware being used.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-30T20:04:31.517" LastActivityDate="2016-04-30T20:04:31.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5237" PostTypeId="4" CreationDate="2016-04-26T10:33:35.647" Score="0" Body="Questions about issues relating to drivers on elementary OS." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:05:33.173" LastActivityDate="2016-04-30T20:05:33.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5238" PostTypeId="5" CreationDate="2016-04-26T10:35:34.833" Score="0" Body="&lt;p&gt;Intel Corporation (better known as Intel, stylized as intel) is an American multinational technology company headquartered in Santa Clara, California. Intel is one of the world's largest and highest valued semiconductor chip makers, based on revenue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is the inventor of the x86 series of microprocessors, the processors found in most personal computers. Intel supplies processors for computer system manufacturers such as Apple, Samsung, HP and Dell. Intel also makes motherboard chipsets, network interface controllers and integrated circuits, flash memory, graphics chips, embedded processors and other devices related to communications and computing.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:06:11.363" LastActivityDate="2016-04-30T20:06:11.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5239" PostTypeId="4" CreationDate="2016-04-26T10:35:34.833" Score="0" Body="Questions relating to running elementary OS on Intel computers." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:05:08.220" LastActivityDate="2016-04-30T20:05:08.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5240" PostTypeId="5" CreationDate="2016-04-26T10:38:52.783" Score="0" Body="&lt;p&gt;NVIDIA Corporation (/ɪnˈvɪdiə/ in-VID-eeə) (commonly referred to as Nvidia, stylized as NVIDIA, nVIDIA or nvidia) began as an American technology company based in Santa Clara, California.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia designs graphics processing units (GPUs) for the gaming market, as well as system on a chip units (SOCs) for the mobile computing and automotive market.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia's primary GPU product line, labeled &quot;GeForce&quot;, is in direct competition with Advanced Micro Devices' (AMD) &quot;Radeon&quot; products. Nvidia expanded its presence in the gaming industry with its handheld SHIELD Portable, SHIELD Tablet, and SHIELD Android TV.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:04:05.173" LastActivityDate="2016-04-30T20:04:05.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5241" PostTypeId="4" CreationDate="2016-04-26T10:38:52.783" Score="0" Body="Questions relating to NVIDIA GPUs on elementary OS." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:01:18.720" LastActivityDate="2016-04-30T20:01:18.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5242" PostTypeId="5" CreationDate="2016-04-26T10:41:02.363" Score="0" Body="&lt;p&gt;A laptop, often called a notebook, is a portable personal computer with a &quot;clamshell&quot; form factor, with a keyboard on the lower part of the &quot;clamshell&quot; and a thin computer screen on the upper portion, which is opened up to use the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard and screen are folded shut for transportation of the laptop. Most laptops these days use an LCD (Liquid Crystal Display).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptops are suitable for mobile use. Although originally there was a distinction between laptops and notebooks, the former being bigger and heavier than the latter, as of 2014, there is often no longer any difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptops are commonly used in a variety of settings, such as at work, in education, and for personal multimedia and home computer use.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:02:20.347" LastActivityDate="2016-04-30T20:02:20.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5243" PostTypeId="4" CreationDate="2016-04-26T10:41:02.363" Score="0" Body="Questions relating to running elementary OS on laptop computers." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:06:41.597" LastActivityDate="2016-04-30T20:06:41.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5244" PostTypeId="5" CreationDate="2016-04-26T10:42:23.147" Score="0" Body="&lt;p&gt;Android is a mobile operating system (OS) currently developed by Google, based on the Linux kernel and designed primarily for touchscreen mobile devices such as smartphones and tablets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Android's user interface is mainly based on direct manipulation, using touch gestures that loosely correspond to real-world actions, such as swiping, tapping and pinching, to manipulate on-screen objects, along with a virtual keyboard for text input.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In addition to touchscreen devices, Google has further developed Android TV for televisions, Android Auto for cars, and Android Wear for wrist watches, each with a specialized user interface. Variants of Android are also used on notebooks, game consoles, digital cameras, and other electronics.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:05:52.487" LastActivityDate="2016-04-30T20:05:52.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5245" PostTypeId="4" CreationDate="2016-04-26T10:42:23.147" Score="0" Body="Questions relating to Android devices and elementary OS." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:01:34.360" LastActivityDate="2016-04-30T20:01:34.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5249" PostTypeId="2" ParentId="5194" CreationDate="2016-04-26T15:19:11.973" Score="0" Body="&lt;p&gt;I think you've cracked it!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just enabled one of the other drivers on the additional driver list and it's closing down/restarting perfectly! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's slightly slow to for the screen to wake up after sleep so I may try the third driver option (although I'm a little worried that I may lose the screen completely if the drivers wrong...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But This is brilliant - thanks for much! &lt;/p&gt;&#xA;" OwnerUserId="4867" LastActivityDate="2016-04-26T15:19:11.973" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5250" PostTypeId="2" ParentId="5177" CreationDate="2016-04-26T17:12:09.047" Score="1" Body="&lt;p&gt;I just tested elementary OS Loki and these problems where gone. So tablet users should install Loki.&lt;/p&gt;&#xA;" OwnerUserId="4828" LastEditorUserId="26" LastEditDate="2016-10-09T00:36:03.950" LastActivityDate="2016-10-09T00:36:03.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5251" PostTypeId="2" ParentId="3609" CreationDate="2016-04-26T17:23:36.393" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://sturmflut.github.io/linux/ubuntu/2015/02/04/installing-ubuntu-on-baytrail-tablets-version-2/&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is how to make bootable installation media to bay trail devices.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Modifying the installation medium to boot on 32-bit UEFI&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Yes, some genius came up with the idea to put a 32-bit UEFI on a 64-bit device. The Linux kernel shipped with Ubuntu 14.10 supports mixed-mode, so kernel-wise it is no longer a problem. But the Ubuntu 14.10 (Vivid Vervid) ISO does not contain a 32-bit bootloader. Luckily this can be easily fixed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Get a bootia32.efi file, I used this one from John Wells.&#xA;     Copy the file into the EFI/BOOT/ folder on the boot medium.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4828" LastActivityDate="2016-04-26T17:23:36.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5253" PostTypeId="2" ParentId="5213" CreationDate="2016-04-26T18:44:22.787" Score="1" Body="&lt;p&gt;amdgpu-pro doesn't support your card&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/linuxmint/wiki/index/graphics#wiki_how_to_install_amdgpu-pro_hybrid_drivers&quot; rel=&quot;nofollow&quot;&gt;https://www.reddit.com/r/linuxmint/wiki/index/graphics#wiki_how_to_install_amdgpu-pro_hybrid_drivers&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4870" LastActivityDate="2016-04-26T18:44:22.787" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5254" PostTypeId="2" ParentId="5231" CreationDate="2016-04-26T20:59:17.947" Score="1" Body="&lt;p&gt;Theory you should be able to install to any pc you want however I know that certain laptops like lenovo or hp needs extra work to get wifi card working; so I don't understand what you meanly does elementary work on your pc as theory it will install, but weather certain parts work or not that is depend on drivers that comes with elementary. Why don't you try the live boot? and if everything seems to be working on that then there's your answer.&lt;/p&gt;&#xA;" OwnerUserId="4871" LastActivityDate="2016-04-26T20:59:17.947" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5255" PostTypeId="1" CreationDate="2016-04-27T07:08:52.420" Score="1" ViewCount="93" Body="&lt;p&gt;When I connect an external monitor via VGA, the computer logs out (not just screen lock). I can see the lock screen on both the monitors with low screen resolutions on both. When I enter the password, the screens go blank, and it again comes back to lock screen. When I remove the VGA cable, the resolution is still low on my laptop. Then when I enter the password, I get back the lock screen again, this time with correct resolution. &lt;em&gt;Now&lt;/em&gt; when I enter the password, I log in to the computer with all the previously running programs closed. I have also tried booting up while the VGA is already connected, but that too gives the same result. I was using this monitor with no problems on Ubuntu 14.04 previously on the same machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using OS 0.3.2 Freya (64-bit). I have a Nvidia GeForce GT 750M graphics card, but I am using the Nouveau driver. The monitor I am connecting is an LG Flatron with a resolution of 1440x900.&lt;/p&gt;&#xA;" OwnerUserId="4873" LastActivityDate="2016-04-27T07:08:52.420" Title="Connecting external monitor logs out computer" Tags="|display|" AnswerCount="0" CommentCount="7" ClosedDate="2016-04-30T19:59:39.267" ContentLicense="CC BY-SA 3.0" />
  <row Id="5256" PostTypeId="1" CreationDate="2016-04-27T08:44:03.237" Score="-1" ViewCount="259" Body="&lt;p&gt;Using elementary OS Freya 0.3.2 (64bit).&lt;/p&gt;&#xA;" OwnerUserId="2427" LastEditorUserId="3757" LastEditDate="2016-04-27T08:48:50.853" LastActivityDate="2016-04-30T19:45:14.777" Title="Missing the &quot;Security &amp; Privacy&quot; option in settings" Tags="|settings|" AnswerCount="1" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5259" PostTypeId="2" ParentId="5231" CreationDate="2016-04-27T19:20:02.080" Score="2" Body="&lt;p&gt;I have installed eOS in my Dell XPS 15, Core i7, in dual boot with Windows 10. eOS works very, very fine, I can see all my files of Win 10, so only in a few times I boot in Windows. The system is up in only 11 seconds, in Windows more than 2 minutes. If you want more details, ask to me. I have not had any difficult to install and have no problems. Actually, is the system than I am using more of the time for work, study and social networks, more than my MacBook and Windows. &lt;/p&gt;&#xA;" OwnerUserId="4602" LastActivityDate="2016-04-27T19:20:02.080" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5260" PostTypeId="2" ParentId="5230" CreationDate="2016-04-27T21:31:34.993" Score="2" Body="&lt;p&gt;It depends on the size of your SSD. If your SSD is bigger than your current HDD you could just use a live distro like &lt;a href=&quot;https://www.system-rescue-cd.org/SystemRescueCd_Homepage&quot; rel=&quot;nofollow&quot;&gt;SystemRescueCD&lt;/a&gt; and use &lt;code&gt;ddrescue&lt;/code&gt; with &lt;code&gt;sudo ddrescue -v --force /dev/sda /dev/sdb&lt;/code&gt; &lt;a href=&quot;https://radu.cotescu.com/migrating-your-ubuntu-machine-to-a-ssd-drive/&quot; rel=&quot;nofollow&quot;&gt;Here is a pretty decent tutorial&lt;/a&gt; which also covers the case that your SSD is smaller than your HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But -- and that is just my personal experience -- I would prefer a clean install. This is what I would do to minimize the hassle:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a new bootable flash drive with elementary OS&lt;/li&gt;&#xA;&lt;li&gt;Buy a harddisk caddy (search amazon) that fits the DVD drive of your laptop for your old HDD&lt;/li&gt;&#xA;&lt;li&gt;Replace the DVD-Drive with the caddy/HDD and install the SSD&lt;/li&gt;&#xA;&lt;li&gt;Make a clean install of elementary OS on you new SSD but don't format the HDD&lt;/li&gt;&#xA;&lt;li&gt;Boot elementary OS from SSD and mount HDD&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now you can select which files from your old home folder you want to restore. You could even do something like &lt;code&gt;rsync -av /mnt/hdd/home/yourname /home/yourname&lt;/code&gt; and recreate your home folder although I would rather have some more control over which files you want to restore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, you can use your HDD as /home by changing the /etc/fstab but I would simply use symbolic links to the hard disk for big folders like &quot;Videos&quot; or &quot;Music&quot;. Just create a folder called &quot;Music&quot; somewhere on the HDD and do &lt;code&gt;ln -s /mnt/hdd/Music /home/yourname/Music&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps!&lt;/p&gt;&#xA;" OwnerUserId="25" LastActivityDate="2016-04-27T21:31:34.993" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5262" PostTypeId="1" CreationDate="2016-04-28T09:30:52.943" Score="9" ViewCount="43896" Body="&lt;p&gt;Is it possible to change the appearance of the dock or to replace it with a different one like Docky? Thanks! &lt;/p&gt;&#xA;" OwnerUserId="4885" LastActivityDate="2017-04-19T19:10:09.570" Title="How to change or replace the dock?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5263" PostTypeId="1" AcceptedAnswerId="5265" CreationDate="2016-04-28T09:54:03.397" Score="0" ViewCount="74" Body="&lt;p&gt;I am trying to install the latest elementary OS Freya on my old laptop - Acer Ferrari WLMI4005. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't boot - in BIOS I have boot from CD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see only black screen with elementary OS logo and do nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the laptop Mint install is working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="4884" LastEditorUserId="3757" LastEditDate="2016-04-28T10:52:29.510" LastActivityDate="2016-04-28T11:30:42.930" Title="Cannot boot, install Freya" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5264" PostTypeId="2" ParentId="5235" CreationDate="2016-04-28T10:41:32.740" Score="1" Body="&lt;p&gt;I never use software center for installation, so I do not know how it handles &lt;code&gt;.deb&lt;/code&gt; files. But maybe &lt;code&gt;gdebi&lt;/code&gt; can help you:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install gdebi&#xA;$ sudo gdebi viber6-XXX.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will install all related dependencies.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-04-28T10:41:32.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5265" PostTypeId="2" ParentId="5263" CreationDate="2016-04-28T11:15:14.253" Score="0" Body="&lt;p&gt;Press the &lt;kbd&gt;ESC&lt;/kbd&gt; key while on the elementary OS logo. This should work on some computers&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-28T11:30:42.930" LastActivityDate="2016-04-28T11:30:42.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5266" PostTypeId="1" CreationDate="2016-04-28T12:21:04.987" Score="1" ViewCount="54" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LvoVB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LvoVB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the cursor is not moving and that frame appears and normally it's black and the letters are white. After the update yesterday it is completely black. I have the default firefox theme, just after the update yesterday it shows this way and I can't read anything. Ideas?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-05-05T13:45:19.843" Title="Firefox cursor information colour black letters" Tags="|mouse|color-format|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5267" PostTypeId="1" CreationDate="2016-04-28T12:40:07.460" Score="1" ViewCount="165" Body="&lt;p&gt;I tried to install Krita via terminal &lt;code&gt;sudo apt-get install krita&lt;/code&gt; and got an error message. Many packages depend on &lt;code&gt;libqtcore4 (&amp;gt;= 4:4.8.0)&lt;/code&gt; which is not going to be installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using elementary OS freya 0.3.2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the problem is that I can't install anything else, I get an error message. The packaging system is damaged. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I've tried &lt;code&gt;sudo apt-get clean&lt;/code&gt;, &lt;code&gt;sudo apt-get -f install&lt;/code&gt; and also removing and purging krita doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to install &lt;code&gt;libqtcore4&lt;/code&gt; e.g. after &lt;code&gt;sudo apt-get autoremove -f&lt;/code&gt;, the following error pops up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Sub-process /usr/bin/dpkg returned an error code (1)&lt;/code&gt; and there is a problem overwriting &lt;code&gt;'/etc/xdg/Trolltech.conf'&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does someone know a solution or can guide me in how to solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="4847" LastEditorUserId="4847" LastEditDate="2016-04-28T15:31:35.683" LastActivityDate="2016-08-26T17:51:46.363" Title="Packaging system broken: Error with libqtcore4 package when installing krita (Freya)" Tags="|release-freya|package-management|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5268" PostTypeId="1" AcceptedAnswerId="5270" CreationDate="2016-04-28T13:04:03.660" Score="1" ViewCount="80" Body="&lt;p&gt;When using Windows (10) I can press &lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;↓&lt;/kbd&gt; to minimize the current window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS freya I cannot do it and instead it opens the virtual desktops&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-28T13:24:40.060" Title="Make Win + ↓ minimize the current window" Tags="|gala|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5269" PostTypeId="2" ParentId="5267" CreationDate="2016-04-28T13:15:37.657" Score="1" Body="&lt;p&gt;To install the latest and correct Krita on Ubuntu and derivatives (elementary OS) run the following commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:kubuntu-ppa/backports &#xA;sudo apt-get update &#xA;sudo apt-get install krita&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will add the PPA and install Krita.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-04-28T13:15:37.657" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5270" PostTypeId="2" ParentId="5268" CreationDate="2016-04-28T13:24:40.060" Score="3" Body="&lt;p&gt;If you go into System Settings --&gt; Keyboard, you should be able to change the shortcut for minimizing the current window. If you change it to a shortcut that's already in use (such as &lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;↓&lt;/kbd&gt;), the old shortcut will be removed and your new shortcut will replace it.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-04-28T13:24:40.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5271" PostTypeId="1" AcceptedAnswerId="5274" CreationDate="2016-04-28T15:41:43.413" Score="2" ViewCount="3511" Body="&lt;p&gt;I have messed up the PPA and now I do not know how to revert the sources.list to its original form.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="4879" LastEditorUserId="25" LastEditDate="2016-04-28T22:04:04.023" LastActivityDate="2016-04-28T22:04:04.023" Title="How do I restore the elementary OS Freya original sources list?" Tags="|ppa|software-sources|sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5272" PostTypeId="2" ParentId="5141" CreationDate="2016-04-28T18:46:42.617" Score="2" Body="&lt;p&gt;I found a temporary reprieve from this issue by disabling the 'Always show remote images' option in Reading preferences, it was driving me nuts!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BLtIB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BLtIB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-04-28T18:46:42.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5273" PostTypeId="2" ParentId="5235" CreationDate="2016-04-28T19:12:32.897" Score="3" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install libqt5gui5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run this in terminal and then reinstall viber.deb&#xA;This resolves the issue.&lt;/p&gt;&#xA;" OwnerUserId="4864" LastActivityDate="2016-04-28T19:12:32.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5274" PostTypeId="2" ParentId="5271" CreationDate="2016-04-28T19:16:23.607" Score="0" Body="&lt;p&gt;Check that you don't have any elementary OS repositories launching &lt;em&gt;Software &amp;amp; Updates&lt;/em&gt;  from Slingshot or terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;software-properties-gtk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you have checked it, open a terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/os-patches &#xA;sudo add-apt-repository ppa:elementary-os/stable &#xA;sudo apt-get update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try to check now for new updates with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get dist-upgrade &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That's all.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-04-28T19:16:23.607" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5276" PostTypeId="2" ParentId="5223" CreationDate="2016-04-28T21:24:30.533" Score="2" Body="&lt;p&gt;The login shell of a user is defined in /etc/passwd. You should edit the file with root privilege and change your user's shell path to /bin/bash.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2016-04-28T21:24:30.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5277" PostTypeId="5" CreationDate="2016-04-29T01:29:49.650" Score="0" Body="&lt;p&gt;In computing, a printer is a peripheral which makes a persistent human readable representation of graphics or text on paper or similar physical media. The two most common printer mechanisms are black and white laser printers used for common documents, and color inkjet printers which can produce high quality photograph output.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-30T20:05:36.127" LastActivityDate="2016-04-30T20:05:36.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5278" PostTypeId="4" CreationDate="2016-04-29T01:29:49.650" Score="0" Body="Questions about using printers with elementary OS." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:04:39.580" LastActivityDate="2016-04-30T20:04:39.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5279" PostTypeId="5" CreationDate="2016-04-29T01:31:14.643" Score="0" Body="&lt;p&gt;Oracle VM VirtualBox (formerly Sun VirtualBox, Sun xVM VirtualBox and Innotek VirtualBox) is a free and open-source hypervisor for x86 computers from Oracle Corporation. Developed initially by Innotek GmbH, it was acquired by Sun Microsystems in 2008 which was in turn acquired by Oracle in 2010.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-04-30T20:04:42.753" LastActivityDate="2016-04-30T20:04:42.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5280" PostTypeId="4" CreationDate="2016-04-29T01:31:14.643" Score="0" Body="Questions about running and installing VirtualBox on elementary OS Freya." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:03:26.453" LastActivityDate="2016-04-30T20:03:26.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5281" PostTypeId="5" CreationDate="2016-04-29T01:36:12.920" Score="0" Body="&lt;p&gt;Mozilla Firefox (or simply Firefox) is a free and open-source web browser developed by the Mozilla Foundation and its subsidiary, the Mozilla Corporation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox is available for elementary OS but also for Windows, macOS and Linux operating systems, with its mobile versions available for Android, and Firefox OS; where all of these versions use the Gecko layout engine to render web pages, which implements current and anticipated web standards, but an additional version released in late 2015 – Firefox for iOS has also been made available – that doesn't use Gecko.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="8517" LastEditDate="2019-01-02T23:25:51.527" LastActivityDate="2019-01-02T23:25:51.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5282" PostTypeId="4" CreationDate="2016-04-29T01:36:12.920" Score="0" Body="Questions about the Firefox web browser on elementary OS." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:05:18.720" LastActivityDate="2016-04-30T20:05:18.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5283" PostTypeId="5" CreationDate="2016-04-29T01:38:20.307" Score="0" Body="&lt;p&gt;A solid-state drive (SSD, also known as a solid-state disk although it contains neither an actual disk nor a drive motor to spin a disk) is a solid-state storage device that uses integrated circuit assemblies as memory to store data persistently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SSD technology primarily uses electronic interfaces compatible with traditional block input/output (I/O) hard disk drives, which permit simple replacements in common applications.Additionally, new I/O interfaces, like SATA Express, have been designed to address specific requirements of the SSD technology.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:04:59.377" LastActivityDate="2016-04-30T20:04:59.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5284" PostTypeId="4" CreationDate="2016-04-29T01:38:20.307" Score="0" Body="Questions about running and using elementary OS with a SSD." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:06:49.143" LastActivityDate="2016-04-30T20:06:49.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5285" PostTypeId="5" CreationDate="2016-04-29T01:40:43.817" Score="0" Body="&lt;p&gt;Advanced Micro Devices, Inc. (AMD) is an American multinational semiconductor company based in Sunnyvale, California, United States, that develops computer processors and related technologies for business and consumer markets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While initially it manufactured its own processors, the company became fabless after GlobalFoundries was spun off in 2009. AMD's main products include microprocessors, motherboard chipsets, embedded processors and graphics processors for servers, workstations and personal computers, and embedded systems applications.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:04:51.563" LastActivityDate="2016-04-30T20:04:51.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5286" PostTypeId="4" CreationDate="2016-04-29T01:40:43.817" Score="0" Body="Questions about running elementary OS with AMD hardware such as GPUs and CPUs." OwnerUserId="3757" LastEditorUserId="242" LastEditDate="2016-04-30T20:04:20.050" LastActivityDate="2016-04-30T20:04:20.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5290" PostTypeId="2" ParentId="5262" CreationDate="2016-04-29T10:10:08.347" Score="5" Body="&lt;p&gt;There is a settings menu for the plank, but it is very limited. You can find it by right clicking on the plank, but you need to make sure you aren't clicking on an icon. This can prove quite tricky.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To replace the plank:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;First, disable plank, this can be done using any configuration tool editor. Install the editor if you don't already have one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once installed, open the editor and select:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Under 0.4 loki:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org -&amp;gt; pantheon -&amp;gt; desktop -&amp;gt; cerbere`&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Under other versions:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org -&amp;gt; pantheon -&amp;gt; cerbere&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Under &lt;em&gt;monitored processes&lt;/em&gt; you'll see something like &lt;code&gt;[‘wingpanel’, ‘plank’, ‘slingshot-launcher –silent’]&lt;/code&gt;, simply remove &lt;code&gt;plank&lt;/code&gt;. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot your device, the plank should now be gone. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Docky, or the dock of your choice. For Docky:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install docky&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can now remove plank if you wish (not necessary):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove plank&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Finally you need to set the new dock to run on startup, this is usually done in the docks settings panel. For Docky ensure that the 'Start When User Logs In' is checked.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you wish to reinstall plank, make sure you remove the other dock first, and that you add 'plank' back to the config file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it should be noted that all installations can be done through the software center if you don't want to use the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your convenience here's a &lt;a href=&quot;http://techdissected.com/web-and-computing/linux/elementary-os-stock-app-dock-doesnt-rock-lets-change-it/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; to a tutorial explaining this in a bit more detail. &lt;a href=&quot;https://unix.stackexchange.com/questions/203803/replace-plank-with-docky-in-elementary-os&quot;&gt;Here&lt;/a&gt; is another example of how to replace plank on the stack exchange.&lt;/p&gt;&#xA;" OwnerUserId="4842" LastEditorUserId="578" LastEditDate="2017-04-19T19:10:09.570" LastActivityDate="2017-04-19T19:10:09.570" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5292" PostTypeId="2" ParentId="5113" CreationDate="2016-04-29T12:30:03.020" Score="1" Body="&lt;p&gt;The Virtual Box forum provided an answer so I thought I would share it in case anyone else encounters this problem. The solution was to Enable 3D Acceleration on the VM.&lt;/p&gt;&#xA;" OwnerUserId="185" LastActivityDate="2016-04-29T12:30:03.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5297" PostTypeId="1" AcceptedAnswerId="5310" CreationDate="2016-04-30T13:17:53.250" Score="-1" ViewCount="193" Body="&lt;p&gt;I installed elementary OS alongside windows  using a USB drive onto an external hard drive (transcend)  and after installation it shows this GRUB command line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't even boot into Windows and I'm using an hp laptop with UEFI firmware and I don't know my group partition number and I have never installed Linux before, so I would need step by step instructions. &lt;/p&gt;&#xA;" OwnerUserId="4902" LastEditorUserId="3757" LastEditDate="2016-05-01T01:21:12.030" LastActivityDate="2016-05-01T17:14:16.837" Title="GNU GRUB version 2.02-beta2-9 showing after installation" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2016-05-02T22:37:50.813" ContentLicense="CC BY-SA 3.0" />
  <row Id="5298" PostTypeId="2" ParentId="5231" CreationDate="2016-04-30T16:24:12.153" Score="0" Body="&lt;p&gt;Developers of elementary OS are paying extra attention to make elementary OS works well on high-resolution screen (as seen, for example, in &lt;a href=&quot;http://blog.elementary.io/post/124193007916/whats-up-with-hidpi-icons&quot; rel=&quot;nofollow&quot;&gt;this blog post&lt;/a&gt;), probably even more so than the developers of other distributions, so it's pretty safe to assume that elementary OS will work well on your device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After all, you could always try running from a stick. Maybe ask people from the store that it's important for you to try this, and that it's a make-or-break factor for you.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-04-30T16:24:12.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5299" PostTypeId="2" ParentId="4126" CreationDate="2016-04-30T16:30:47.680" Score="1" Body="&lt;p&gt;So, you have an installation you're not willing to remove? If you are able to remove the stuff you installed, you can just delete all the partitions and then create new ones. Note that, if you want to split the disk into many partitions, the biggest ones should be &lt;code&gt;/home&lt;/code&gt; (where all your user-created stuff goes) and &lt;code&gt;/opt&lt;/code&gt; (where most of the installed programs go).&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-04-30T16:30:47.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5300" PostTypeId="2" ParentId="3607" CreationDate="2016-04-30T17:02:04.697" Score="0" Body="&lt;p&gt;It looks like the cause of the problem is not the buffer size, but rather the network manager, which apparently intermittently has the WiFi device scan for networks. This seems to interrupt the stream, so independently of the buffer size little parts of the stream are missing, which produces the stuttering effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to fix it by setting the BSSID of my WiFi connection. It's fairly easy, all you have to do is go to the settings of your connection. There's a pull-down menu named &quot;BSSID&quot; which is usually empty, but if you open it it offers you a string of characters. Pick that one, and it'll work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enjoy your music and rock on!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-06-08T14:13:19.770" LastActivityDate="2016-06-08T14:13:19.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5301" PostTypeId="2" ParentId="5256" CreationDate="2016-04-30T19:45:14.777" Score="2" Body="&lt;p&gt;OP found the missing plug:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;@RolandiXor - Thank You for your help bro, but I already found it&#xA;  switchboard-plug-security-privacy.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-04-30T19:45:14.777" CommentCount="0" CommunityOwnedDate="2016-04-30T19:45:14.777" ContentLicense="CC BY-SA 3.0" />
  <row Id="5302" PostTypeId="2" ParentId="5235" CreationDate="2016-04-30T19:58:24.907" Score="0" Body="&lt;p&gt;For those who prefer to solve issues from the command line, simply run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install -f&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...whenever a deb you've installed didn't have its dependencies resolved.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-04-30T19:58:24.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5303" PostTypeId="1" CreationDate="2016-04-30T20:23:35.717" Score="1" ViewCount="311" Body="&lt;p&gt;After some time off from elementary OS, I went back in, logged and now I'm not getting any audio playback from the Videos (0.1.0.2) app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have sound in my browser, Music (0.3.1) app, and general system, I even installed VLC and I have sound with it to, but nothing on Videos, I've have tried with various files (.mp4, .avi, .mkv) and nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I updated my system and it did nothing.&lt;/p&gt;&#xA;" OwnerUserId="291" LastActivityDate="2017-02-10T06:03:09.413" Title="No sound playback in Videos (elementary OS Freya 0.3.2)" Tags="|release-freya|sound|videos|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5304" PostTypeId="1" AcceptedAnswerId="5305" CreationDate="2016-05-01T00:16:49.340" Score="3" ViewCount="4310" Body="&lt;p&gt;You can drag the icons on the dock and put them in and out, but is there any way of locking them so you can't do this?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="26" LastEditDate="2016-10-02T14:13:57.120" LastActivityDate="2016-10-02T14:13:57.120" Title="Is there any way to lock the dock?" Tags="|plank|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5305" PostTypeId="2" ParentId="5304" CreationDate="2016-05-01T00:51:43.180" Score="5" Body="&lt;p&gt;Yes, this is possible. You can open the dock's preferences by right-clicking on a free space of the dock. Probably you will need several tries not to open context menu from an icon - but believe me, there are preferences:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lVn5D.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lVn5D.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me the easiest way to open the preference window was the rightmost bottom of the dock (for bottom-placed dock). In the 'behaviour' tab you can lock the icons.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-05-01T00:51:43.180" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5306" PostTypeId="2" ParentId="5106" CreationDate="2016-05-01T01:15:39.833" Score="2" Body="&lt;p&gt;Open up a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo cryptsetup luksChangeKey /dev/sda5 -S 0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to add another passphrase:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo cryptsetup luksAddKey /dev/sda5&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to see which keyslots are enabled:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo cryptsetup luksDump /dev/sda5&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to erase keyslot #1:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo cryptsetup luksRemoveKey /dev/sda5 -S 1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;DO NOT erase the last remaining keyslot without creating another one or you'll lock yourself out of the disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hat tip to the good ole &lt;a href=&quot;https://wiki.archlinux.org/index.php/Dm-crypt/Device_encryption#Adding_LUKS_keys&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arch Wiki&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2018-02-11T17:43:26.627" LastActivityDate="2018-02-11T17:43:26.627" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5310" PostTypeId="2" ParentId="5297" CreationDate="2016-05-01T17:14:16.837" Score="-2" Body="&lt;p&gt;Nevermind I fixed it. This website sucks. &lt;/p&gt;&#xA;" OwnerUserId="4902" LastActivityDate="2016-05-01T17:14:16.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5312" PostTypeId="2" ParentId="2371" CreationDate="2016-05-01T19:54:53.237" Score="1" Body="&lt;p&gt;You can do the following to solve the problem-&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install your desired input method for &lt;strong&gt;IBus&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;ibus-setup&lt;/code&gt; command from &lt;strong&gt;terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Select 'Input method' tab and &lt;strong&gt;Add&lt;/strong&gt; your desired input method.&lt;/li&gt;&#xA;&lt;li&gt;Close 'IBus Setup' and run &lt;code&gt;ibus-daemon -drx&lt;/code&gt; in &lt;strong&gt;terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;It starts IBus daemon but It doesn't show IBus on the panel, but it brings up the input method popup and let us choose our desired input method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you IBus to automatically start with the system, then go to &lt;strong&gt;Settings&lt;/strong&gt; &gt; &lt;strong&gt;Applications&lt;/strong&gt; &gt; &lt;strong&gt;Startup&lt;/strong&gt; and add &lt;code&gt;ibus-daemon -drx&lt;/code&gt; as a custom command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to use any QT/KDE applications, you have to install the package &lt;code&gt;ibus-qt4&lt;/code&gt; as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ibus-qt4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4591" LastEditorUserId="578" LastEditDate="2017-02-02T07:10:32.393" LastActivityDate="2017-02-02T07:10:32.393" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5313" PostTypeId="2" ParentId="1431" CreationDate="2016-05-01T19:59:29.557" Score="1" Body="&lt;p&gt;You can do the following to solve the problem-&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install your desired input method for &lt;strong&gt;IBus&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;ibus-setup&lt;/code&gt; command from &lt;strong&gt;terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Select 'Input method' tab and &lt;strong&gt;Add&lt;/strong&gt; your desired input method.&lt;/li&gt;&#xA;&lt;li&gt;Close 'IBus Setup' and run &lt;code&gt;ibus-daemon -drx&lt;/code&gt; in &lt;strong&gt;terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;It starts IBus daemon but It doesn't show IBus on the panel, it brings up the input method popup and let us choose our desired input method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want IBus to automatically start with the system, then go to &lt;strong&gt;Settings&lt;/strong&gt; &gt; &lt;strong&gt;Applications&lt;/strong&gt; &gt; &lt;strong&gt;Startup&lt;/strong&gt; and add &lt;code&gt;ibus-daemon -drx&lt;/code&gt; as a custom command.&lt;/p&gt;&#xA;" OwnerUserId="4591" LastEditorUserId="4591" LastEditDate="2016-05-02T15:27:39.160" LastActivityDate="2016-05-02T15:27:39.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5314" PostTypeId="1" CreationDate="2016-05-01T20:17:45.730" Score="2" ViewCount="333" Body="&lt;p&gt;I have installed Elementary OS recently. At some point my touchpad stopped to work. Not completely, but I cannot &lt;em&gt;move&lt;/em&gt; it, all I can do is click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to enable it at settings. Turning on/off on laptop shortcuts. Nothing really worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked before, but somehow stopped.&#xA;Any ideas guys?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop Lenovo Y510P, ETPS/2 Elantech Touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best, Jacob&lt;/p&gt;&#xA;" OwnerUserId="4916" LastActivityDate="2016-09-24T20:39:45.047" Title="ETPS/2 Elantech Touchpad. Buttons work, cannot swipe" Tags="|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5316" PostTypeId="2" ParentId="5314" CreationDate="2016-05-02T11:59:20.670" Score="1" Body="&lt;p&gt;If you don't already have these drivers, I would recommend installing them:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hanipouspilot/focaltech-dkms&#xA;sudo apt update&#xA;sudo apt install focaltech-dkms&#xA;sudo modprobe -r psmouse &#xA;sudo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;modprobe psmouse&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't help try the following command as root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo 1 &amp;gt; /sys/devices/platform/i8042/serio4/reg_07&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;These worked for me when I had that laptop, but that was about 6 months ago, so not sure if that's still the problem. I just know that Elantech touch-pads don;t seem to like debian based distros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if neither of these works, you can try install the gcc drivers (I haven't personally tried these though):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-gcc-mouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Some helpful links, for reference:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://ubuntuforums.org/showthread.php?t=2271795&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link 1&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/821/touchpad-not-working-on-asus-x550&quot;&gt;Link 2&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4842" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-24T20:39:45.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5317" PostTypeId="1" CreationDate="2016-05-02T12:00:34.467" Score="2" ViewCount="1966" Body="&lt;p&gt;The title bar (that above the tabs) is hidden when pantheon-terminal is full-screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can this bar be hidden when not full-screen? Alternatively, I'd be happier if I could make both it and the tab bar half the height that they presently occupy, but this doesn't seem to be an option in dconf.&lt;/p&gt;&#xA;" OwnerUserId="4919" LastActivityDate="2016-12-28T18:54:23.403" Title="Hide title bar in pantheon-terminal?" Tags="|pantheon-terminal|user-interface|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="5318" PostTypeId="2" ParentId="5231" CreationDate="2016-05-02T12:15:48.867" Score="1" Body="&lt;p&gt;My PC is a XPS 15 (L521x), resolution 1920x1080, elementary works very fine, better than the Windows driver. &lt;/p&gt;&#xA;" OwnerUserId="4602" LastActivityDate="2016-05-02T12:15:48.867" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5320" PostTypeId="1" AcceptedAnswerId="5321" CreationDate="2016-05-02T16:04:45.537" Score="0" ViewCount="318" Body="&lt;p&gt;I have an issue with my sublime text 3 installation where the text is displayed with blocks rather than actual letters. Here is what I mean:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7xTdK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7xTdK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried &lt;code&gt;apt-get install --reinstall sublime-text-installer&lt;/code&gt; but that failed to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone offer a suggestion as to how I can fix this?&lt;/p&gt;&#xA;" OwnerUserId="3050" LastActivityDate="2016-05-02T17:24:44.567" Title="Sublime text font on Elementary" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5321" PostTypeId="2" ParentId="5320" CreationDate="2016-05-02T17:24:44.567" Score="2" Body="&lt;p&gt;The problem was that I was using &lt;a href=&quot;https://github.com/google/fonts&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;googlefonts&lt;/strong&gt;&lt;/a&gt; which I symlinked to my &lt;code&gt;~/.fonts&lt;/code&gt; directory. The link was broken when I was installing some stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After cloning the repo again and creating the directory directly within the &lt;code&gt;~/.fonts&lt;/code&gt; folder, everything went back to normal&lt;/p&gt;&#xA;" OwnerUserId="3050" LastActivityDate="2016-05-02T17:24:44.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5324" PostTypeId="2" ParentId="3214" CreationDate="2016-05-02T23:28:07.530" Score="1" Body="&lt;p&gt;I was having trouble with this too so I modified &lt;a href=&quot;https://github.com/AdnanHodzic/displaylink-debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;AdnanHodzic's&lt;/a&gt; code to run on elementary. You can find the source here &lt;a href=&quot;https://github.com/jpopesculian/displaylink-debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jpopesculian/displaylink-debian&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Do a git clone: &lt;code&gt;git clone https://github.com/jpopesculian/displaylink-debian.git &lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;And run the file: &lt;code&gt;displaylink-debian/displaylink-debian.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Let me know if that works for you!&lt;/p&gt;&#xA;" OwnerUserId="4923" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-05-02T23:28:07.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5325" PostTypeId="2" ParentId="5262" CreationDate="2016-05-03T08:07:53.893" Score="5" Body="&lt;h2&gt;To change the appearnce&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1934/170&quot;&gt;this Daniel Foré's answer&lt;/a&gt; Freya uses a Plank version that has some options patched out. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get more changes one should use &lt;a href=&quot;https://launchpad.net/~ricotz/+archive/ubuntu/docky&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rico's PPA&lt;/a&gt; and install from there (after uninstalling the default version).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, to change the appearance of the dock (Plank) one can use themes that can be found on the net,  e.g. on &lt;a href=&quot;http://www.deviantart.com/browse/all/customization/skins/linuxutil/applications/docks/?q=plank&quot; rel=&quot;nofollow noreferrer&quot;&gt;deviantart.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UXqT7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UXqT7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Themes are located in &lt;code&gt;~/.local/share/plank/themes&lt;/code&gt; and &lt;code&gt;/usr/share/plank/themes&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The settings can be accessed by right-clicking the dock (a bit tricky, you have to do that outside any icon) or by the command &lt;code&gt;plank --preferences&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i0t6o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i0t6o.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find that in the application launcher for the future (using &lt;code&gt;gedit&lt;/code&gt; text editor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/plank_preferences.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and paste this &amp;amp; save:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Plank Settings&#xA;Exec=plank --preferences&#xA;Icon=plank&#xA;Terminal=false&#xA;Categories=GNOME;GTK;System;&#xA;X-GNOME-Keywords=Center;Control;Panel;Preferences;System;&#xA;X-AppInstall-Keywords=Center;Control;Panel;Preferences;System;&#xA;X-GNOME-Gettext-Domain=switchboard&#xA;Actions=AboutDialog;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also one can install elementary-tweaks.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nckoU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nckoU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To manually change settings, edit &lt;code&gt;~/.config/plank/dock1/settings&lt;/code&gt; which contains detailed description of the possible options. Mine looks like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#This file auto-generated by Plank.&#xA;#2016-05-02T07:00:48+0000&#xA;&#xA;[PlankDockPreferences]&#xA;#Whether to show only windows of the current workspace.&#xA;CurrentWorkspaceOnly=false&#xA;#The size of dock icons (in pixels).&#xA;IconSize=30&#xA;#If 0, the dock won't hide.  If 1, the dock intelligently hides.  If 2, the dock auto-hides. If 3, the dock dodges active maximized windows. If 4, the dock dodges every window.&#xA;HideMode=0&#xA;#Time (in ms) to wait before unhiding the dock.&#xA;UnhideDelay=0&#xA;#Time (in ms) to wait before hiding the dock.&#xA;HideDelay=0&#xA;#The plug-name of the monitor for the dock to show on (e.g. DVI-I-1, HDMI1, LVDS1). Leave this empty to keep on the primary monitor.&#xA;Monitor=&#xA;#List of *.dockitem files on this dock. DO NOT MODIFY&#xA;DockItems=pantheon-files.dockitem;;seamonkey.dockitem;;firefox.dockitem;;deadbeef.dockitem;;clementine.dockitem;;SoundWire-Server.dockitem;;pavucontrol.dockitem;;Players.dockitem;;RADIOS.dockitem;;Enable.dockitem;;audacious_cd.dockitem&#xA;#The position for the dock on the monitor.  If 0, left.  If 1, right.  If 2, top.  If 3, bottom.&#xA;Position=3&#xA;#The dock's position offset from center (in percent).&#xA;Offset=0&#xA;#The name of the dock's theme to use.&#xA;Theme=Kit-Kat&#xA;#The alignment for the dock on the monitor's edge.  If 0, panel-mode.  If 1, left-aligned.  If 2, right-aligned.  If 3, centered.&#xA;Alignment=3&#xA;#The alignment of the items in this dock if panel-mode is used.  If 1, left-aligned.  If 2, right-aligned.  If 3, centered.&#xA;ItemsAlignment=3&#xA;#Whether to prevent drag'n'drop actions and lock items on the dock.&#xA;LockItems=false&#xA;#Whether to use pressure-based revealing of the dock if the support is available.&#xA;PressureReveal=true&#xA;#Whether to show only pinned applications. Useful for running more then one dock.&#xA;PinnedOnly=false&#xA;#Whether to automatically pin an application if it seems useful to do.&#xA;AutoPinning=true&#xA;#Whether to show the item for the dock itself.&#xA;ShowDockItem=false&#xA;#Whether the dock will zoom when hovered.&#xA;ZoomEnabled=true&#xA;#The dock's icon-zoom (in percent).&#xA;ZoomPercent=103&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;To replace the Dock&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Nothing stops you.&#xA;Plank can be uninstalled or just disabled as indicated in the other answer (also &lt;a href=&quot;https://unix.stackexchange.com/a/184752/32012&quot;&gt;here)&lt;/a&gt;  and a different dock can be installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;strong&gt;I see Plank as part  of the whole concept of elementary OS&lt;/strong&gt;. When such ideas come in my mind I think it's better to use a different system than start disassembling one that was conceived in the way elementary is.)    &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-09T06:41:38.820" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="5326" PostTypeId="2" ParentId="5304" CreationDate="2016-05-03T08:21:24.903" Score="5" Body="&lt;p&gt;As a complement to the other answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command for the Plank settings UI is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;plank --preferences&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find that with your applications launcher in the future (using &lt;code&gt;gedit&lt;/code&gt; text editor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/plank_preferences.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then paste this &amp;amp; save:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Plank Settings&#xA;Exec=plank --preferences&#xA;Icon=plank&#xA;Terminal=false&#xA;Categories=GNOME;GTK;System;&#xA;X-GNOME-Keywords=Center;Control;Panel;Preferences;System;&#xA;X-AppInstall-Keywords=Center;Control;Panel;Preferences;System;&#xA;X-GNOME-Gettext-Domain=switchboard&#xA;Actions=AboutDialog;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/A2ypU.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/A2ypU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make changes like the one you mention one can also edit the file  &lt;code&gt;~/.config/plank/dock1/settings&lt;/code&gt; which contains detailed description of the possible options. To lock the icons go to line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Whether to prevent drag'n'drop actions and lock items on the dock.&#xA;LockItems=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change that to &lt;code&gt;true&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-05-03T08:21:24.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5327" PostTypeId="2" ParentId="5314" CreationDate="2016-05-03T12:58:15.307" Score="1" Body="&lt;p&gt;I have fixed it somehow while struggling with Bumblebee and Primus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe  &lt;code&gt;sudo apt-get install  xorg-x11-drv-mouse&lt;/code&gt;  might be the answer.&lt;/p&gt;&#xA;" OwnerUserId="4916" LastActivityDate="2016-05-03T12:58:15.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5328" PostTypeId="1" CreationDate="2016-05-03T15:01:33.883" Score="1" ViewCount="72" Body="&lt;p&gt;I wanted to ask about this because it didn't happened to me before with other linux distributions (i.e Fedora or Mint)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For whatever reason the HDD in the laptop runs very hot, so hot that is really uncomfortable to write with my hand touching the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried several software pieces to check what may be happening and I detected a high I/O from gala.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Why does &quot;gala&quot; have an I/O percentage so high?&lt;/li&gt;&#xA;&lt;li&gt;Is this normal even in idle state?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;iotop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;max@linux-max:~$ sensors&#xA;acpitz-virtual-0&#xA;Adapter: Virtual device&#xA;temp1:        +49.0°C  (crit = +128.0°C)&#xA;temp2:         +0.0°C  (crit = +128.0°C)&#xA;temp3:        +44.0°C  (crit = +128.0°C)&#xA;temp4:        +50.0°C  (crit = +128.0°C)&#xA;temp5:        +27.0°C  (crit = +128.0°C)&#xA;temp6:       +127.0°C  (crit = +128.0°C)&#xA;&#xA;coretemp-isa-0000&#xA;Adapter: ISA adapter&#xA;Physical id 0:  +50.0°C  (high = +87.0°C, crit = +105.0°C)&#xA;Core 0:         +49.0°C  (high = +87.0°C, crit = +105.0°C)&#xA;Core 1:         +50.0°C  (high = +87.0°C, crit = +105.0°C)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;top&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;max@linux-max:~$ top&#xA;top - 11:27:24 up  1:01,  6 users,  load average: 0.26, 0.30, 0.33&#xA;Tasks: 226 total,   1 running, 225 sleeping,   0 stopped,   0 zombie&#xA;%Cpu(s):  2.8 us,  0.7 sy,  0.0 ni, 93.9 id,  2.6 wa,  0.0 hi,  0.0 si,  0.0 st&#xA;KiB Mem:  16309500 total,  3468488 used, 12841012 free,   446700 buffers&#xA;KiB Swap:  2097148 total,        0 used,  2097148 free.  1350980 cached Mem&#xA;  PID USER      PR  NI    VIRT    RES    SHR S  %CPU %MEM     TIME+ COMMAND&#xA; 7714 root      20   0   80308  15736   7348 S   4.6  0.1   0:23.06 iotop&#xA; 1350 root      20   0  340740  73144  56096 S   3.7  0.4   1:24.67 Xorg&#xA; 2414 max       20   0  613640  36952  26424 S   3.3  0.2   0:21.44 pantheon-termin&#xA; 2550 max       20   0 1905892 869704  98484 S   3.0  5.3   8:30.09 firefox&#xA; 2005 max       20   0 1035020 123108  37832 S   2.7  0.8   0:39.35 gala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;iotop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Total DISK READ :       0.00 B/s | Total DISK WRITE :       0.00 B/s&#xA;Actual DISK READ:       0.00 B/s | Actual DISK WRITE:       0.00 B/s&#xA;  TID  PRIO  USER     DISK READ  DISK WRITE  SWAPIN      IO    COMMAND&#xA; 2005 be/4 max         0.00 B/s    0.00 B/s  0.00 % 11.34 % gala&#xA;    1 be/4 root        0.00 B/s    0.00 B/s  0.00 %  0.00 % init&#xA;    2 be/4 root        0.00 B/s    0.00 B/s  0.00 %  0.00 % [kthreadd]&#xA;    3 be/4 root        0.00 B/s    0.00 B/s  0.00 %  0.00 % [ksoftirqd/0]&#xA;    5 be/0 root        0.00 B/s    0.00 B/s  0.00 %  0.00 % [kworker/0:0H]&#xA; 2054 be/4 max         0.00 B/s    0.00 B/s  0.00 %  0.00 % indicator-messages-service&#xA;    7 be/4 root        0.00 B/s    0.00 B/s  0.00 %  0.00 % [rcu_sched]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;smartctl&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;max@linux-max:~$ sudo smartctl -A /dev/sda | grep Temperature_Cel&#xA;190 Airflow_Temperature_Cel 0x0022   065   056   045    Old_age   Always       -       35 (Min/Max 20/36)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any suggestions on what else to check or what can I do to lower the temperature for the HDD would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Max&lt;/p&gt;&#xA;" OwnerUserId="4928" LastActivityDate="2016-05-03T15:01:33.883" Title="Laptop HDD runs very hot (even in idle state)" Tags="|release-freya|system|hardware|disk-management|temperature|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5330" PostTypeId="1" CreationDate="2016-05-03T18:16:24.703" Score="1" ViewCount="305" Body="&lt;p&gt;I have a problem with the panel elementary OS Freya, I update the system and then I change the language to spanish using the &quot;configuration system&quot;,when i close the session all system changed,but not the panel.&lt;/p&gt;&#xA;" OwnerUserId="4934" LastEditorUserId="4934" LastEditDate="2016-05-04T07:35:50.023" LastActivityDate="2017-04-20T20:05:57.020" Title="System language changue to spanish" Tags="|system|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5331" PostTypeId="1" CreationDate="2016-05-03T21:05:51.773" Score="1" ViewCount="59" Body="&lt;p&gt;Why is it that Videos' color scheme is dark grey when the other apps seem to be light grey?  It kinda stands out and looks odd as a whole.  The rest of the apps appear to go together.&lt;/p&gt;&#xA;" OwnerUserId="4936" LastActivityDate="2016-09-14T13:34:18.253" Title="Why is videos color scheme different" Tags="|videos|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5332" PostTypeId="2" ParentId="5266" CreationDate="2016-05-03T22:49:59.280" Score="1" Body="&lt;p&gt;Daniel Fore added some code in the stylesheet a few hours ago to fix this. &lt;em&gt;(thanks by the way ;)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add these 2 lines by yourself in your &lt;code&gt;gtk-widgets.css&lt;/code&gt; or wait for an system update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file is in your system folder... &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the changes you can find here...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-design/egtk/4.x/revision/541&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-design/egtk/4.x/revision/541&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to see the changes click on... &lt;strong&gt;&gt;&lt;/strong&gt; expand all&lt;/p&gt;&#xA;" OwnerUserId="4937" LastEditorUserId="3757" LastEditDate="2016-05-05T13:45:19.843" LastActivityDate="2016-05-05T13:45:19.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5333" PostTypeId="1" CreationDate="2016-05-04T06:13:31.900" Score="-3" ViewCount="1092" Body="&lt;p&gt;Updating from Freya to wily is quite annoying at this point. I'm somewhat a newbie to Linux, but when I run update commands in terminal or software update I get the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W:Failed to fetch_http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/trusty/main/binary-amd64/Packages/dists/trusty/main/source/Sources  404  Not Found&#xA;, &#xA;&#xA;W:Failed to fetch_http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/trusty/main/binary-amd64/Packages/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;,&#xA;&#xA; W:Failed to fetch_http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/trusty/main/binary-amd64/Packages/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;,&#xA;&#xA; W:Failed to fetch_http://ppa.launchpad.net/gwibber-daily/ppa/ubuntu/dists/trusty/main/source/Sources  404  Not Found&#xA;,&#xA;&#xA; W:Failed to fetch_http://ppa.launchpad.net/gwibber-daily/ppa/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;, &#xA;&#xA;W:Failed to fetch_http://ppa.launchpad.net/gwibber-daily/ppa/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;,&#xA;&#xA; E:Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4941" LastEditorUserId="3757" LastEditDate="2016-05-04T07:53:17.673" LastActivityDate="2016-05-05T01:07:31.577" Title="elementary OS 14.04 to 15.10 upgrade issues" Tags="|release-freya|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5335" PostTypeId="2" ParentId="5333" CreationDate="2016-05-04T07:52:33.673" Score="3" Body="&lt;p&gt;Don't try to upgrade elementary OS Freya to Ubuntu 15.10. You will break your system since elementary hasn't released packages for Ubuntu 15.10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to upgrade Freya then &lt;strong&gt;wait&lt;/strong&gt; for elementary OS Loki (based on Ubuntu 16.04) to be released.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-05T01:07:31.577" LastActivityDate="2016-05-05T01:07:31.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5336" PostTypeId="2" ParentId="5333" CreationDate="2016-05-04T08:04:52.427" Score="0" Body="&lt;p&gt;Although elementary OS is &lt;strong&gt;based on Ubuntu&lt;/strong&gt;, &lt;strong&gt;you must wait&lt;/strong&gt; for elementary OS 0.4 (Loki) release. It's possible to add Ubuntu repositories, but you can destroy your Elementary.&lt;/p&gt;&#xA;" OwnerUserId="4943" LastEditorUserId="3757" LastEditDate="2016-05-04T10:29:18.253" LastActivityDate="2016-05-04T10:29:18.253" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5338" PostTypeId="1" CreationDate="2016-05-04T11:03:39.783" Score="1" ViewCount="150" Body="&lt;p&gt;After resuming the system from suspend, the WiFi service stops working and wifi icon disappears. &#xA;I tried registering a service at &lt;strong&gt;/etc/systemd/system/resume-wifi.service&lt;/strong&gt; folder.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Local system resume actions&#xA;After=suspend.target&#xA;&#xA;[Service]&#xA;Type=oneshot&#xA;ExecStart=/bin/systemctl restart network-manager.service&#xA;&#xA;[Install]&#xA;WantedBy=suspend.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But for activating the service, I tried using systemctl which is not found  in elementary os packages.&#xA;Used this link for above: &lt;a href=&quot;https://askubuntu.com/questions/638124/no-wifi-after-suspend-on-15-04/642559&quot;&gt;AskUbuntu Link&lt;/a&gt;. Please suggest how to resume the service in this OS. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="4946" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-05-05T05:11:32.693" Title="WiFi service stops after system resumes" Tags="|wifi|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5339" PostTypeId="2" ParentId="3342" CreationDate="2016-05-04T15:28:53.100" Score="0" Body="&lt;p&gt;For me the package '&lt;em&gt;thunderbird-gnome-support&lt;/em&gt;' doesn't work and i doesn't know what this is actually doing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My working solution &gt;&gt; Install the extension &lt;strong&gt;&lt;a href=&quot;https://addons.mozilla.org/de/thunderbird/addon/enhanced-desktop-notifications/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Enhanced Desktop Notifications&lt;/a&gt;&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will send a message to 'notify-send' library.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q2KZI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q2KZI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4949" LastActivityDate="2016-05-04T15:28:53.100" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5340" PostTypeId="1" CreationDate="2016-05-04T17:18:08.647" Score="1" ViewCount="37" Body="&lt;p&gt;As you can see in the picture i am unable to login to Steam because there is no username and password boxes.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hsnuD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hsnuD.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help woud be appreciated&lt;/p&gt;&#xA;" OwnerUserId="4906" LastActivityDate="2016-05-04T17:18:08.647" Title="Cant Log into Steam" Tags="|steam|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5342" PostTypeId="1" CreationDate="2016-05-04T21:19:51.857" Score="0" ViewCount="140" Body="&lt;p&gt;I’ve just installed Elementary OS on my Toshiba Laptop and now I am getting boot issues. To turn the computer on after shutting down I have to force shutdown twice to get it to startup. The first time I just get a blank screen. I never used to have this problem when I used to run Windows 10 and Ubuntu. &lt;/p&gt;&#xA;" OwnerUserId="4952" LastActivityDate="2021-01-28T01:55:59.907" Title="Laptop having boot issues" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5343" PostTypeId="1" AcceptedAnswerId="5349" CreationDate="2016-05-05T11:45:45.363" Score="1" ViewCount="242" Body="&lt;p&gt;I've been watching Netflix in Google Chrome for months without any problem. Since one of the last updates however, there are weird graphical glitches. If you start a stream, you can only hear the audio. Otherwise the screen remains black or will just show the preview pic, and if you start hovering above the timeline with the mouse, the little thumbnails that pop up will stay. Also, if you scroll down in the menu you get the same effect. It looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FKbze.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FKbze.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y1n5R.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y1n5R.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using &lt;strong&gt;Google Chrome 50.0.2661.94&lt;/strong&gt; (64-bit) on freya 0.3.2. So far as I know it is the current version. I have an &lt;strong&gt;i7-6500U CPU&lt;/strong&gt; and an &lt;strong&gt;AMD Radeon R5 M335&lt;/strong&gt; graphics card. I've tried other videos, they work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas??!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-05-05T11:52:36.660" LastActivityDate="2016-05-06T23:39:07.240" Title="Problems with Netflix in new Google Chrome" Tags="|release-freya|google-chrome|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5344" PostTypeId="1" CreationDate="2016-05-05T12:14:38.580" Score="1" ViewCount="67" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/03nUe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/03nUe.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;Hi Please refer the below image for reference. It showing one more dektop, I need to remove it. &lt;/p&gt;&#xA;" OwnerUserId="4956" LastActivityDate="2016-07-05T20:29:03.590" Title="Desktop inside desktop How can i delete it?" Tags="|desktop|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5345" PostTypeId="1" CreationDate="2016-05-05T12:45:56.647" Score="2" ViewCount="1092" Body="&lt;p&gt;Installed Elementary via the live usb to D drive. C Drive is windows ssd. In boot order have changed so the D drive is higher in the boot order than C. When order is reversed, the C drive works as usual. When the D drive is first I get a 'no operating system found' message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked the checksum of the download and installed the usb as per the guide. Am installing whilst connected to a wired internet connection. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What setting do I need to change to get this to work? Have heard suggestion that it is a grub error, how then to install grub when I cannot access the operating system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="4957" LastActivityDate="2016-09-08T00:49:12.390" Title="Operating System Not Found" Tags="|boot|dual-boot|usb|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5346" PostTypeId="1" CreationDate="2016-05-05T13:25:24.420" Score="2" ViewCount="163" Body="&lt;p&gt;I am always adding new music. Is there a way Noise can update my library without having to import?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2016-11-30T04:32:46.207" Title="Is there a way to make Noise automatically update music library?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5347" PostTypeId="2" ParentId="3914" CreationDate="2016-05-05T13:57:00.360" Score="1" Body="&lt;p&gt;rEFInd is the way to go. I use rEFInd on my UEFI laptop and I have not experienced any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is also highly customizable and has lots of themes to choose from and is actively developed by Rod Smith.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see some rEFInd themes at &lt;a href=&quot;http://www.rodsbooks.com/refind/themes.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rodsbooks.com/refind/themes.html&lt;/a&gt; &lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also a guide for installing rEFInd &lt;a href=&quot;http://www.rodsbooks.com/refind/installing.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rodsbooks.com/refind/installing.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a picture of my laptop with rEFInd using the Next Theme with a custom wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qlkKM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qlkKM.jpg&quot; alt=&quot;refind&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using my custom wallpaper I created in GIMP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lvxm5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lvxm5.jpg&quot; alt=&quot;wallpaper&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-05T13:57:00.360" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5348" PostTypeId="1" CreationDate="2016-05-05T19:13:43.813" Score="0" ViewCount="589" Body="&lt;p&gt;I'm installing LibreOffice on my elementary OS, i have tried with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and finally &lt;code&gt;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when i open LibreOffice from Applications, the pc go to &quot;suspend&quot; can you help me?&lt;/p&gt;&#xA;" OwnerUserId="4963" LastEditorUserId="3757" LastEditDate="2016-05-06T01:29:07.877" LastActivityDate="2017-12-27T16:36:52.790" Title="Problem with LibreOffice Installation" Tags="|software-installation|libreoffice|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5349" PostTypeId="2" ParentId="5343" CreationDate="2016-05-06T08:30:06.347" Score="0" Body="&lt;p&gt;Disabling hardware acceleration in the Chrome settings fixed the problem. Don't ask me why though ;)&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-05-06T23:39:07.240" LastActivityDate="2016-05-06T23:39:07.240" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5351" PostTypeId="2" ParentId="81" CreationDate="2016-05-06T10:07:15.627" Score="0" Body="&lt;p&gt;I had this problem and am only a self taught linux user but this is how I solved it and the bug of the greeter.&#xA;I deleted the elementaryos-default.jpg file and replaced it with one I liked and changed the image name back to elementaryos-default.png (the one I liked is png file)&#xA;This gave me a white screen on user accounts,except the main admin one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thinking as it's a new install of my OS and I HAVE A GOOD BACKUP, it doesn't really matter a lot if I mess up I did this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I renamed all the files with &quot;wallpaper&quot; in the name - one at a time&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed recursively all the files and the backgrounds folder to 777&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I did this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;ls -l&#xA;&#xA;total 27872&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   60293 Oct 15  2015 1877-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  106528 Feb 10 20:18 1a-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   76441 Mar 28 22:55 1b-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   53674 Jan  3 19:09 1c-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   33025 May 14  2014 1d-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  105513 Oct 16  2014 1e-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   52607 Sep 23  2015 1f-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia 1426136 Feb 23 21:19 1g-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia 1388122 Feb 23 21:24 1h-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia 3245250 Feb 23 21:25 1i-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  144468 Dec 26 17:36 1j-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  514417 Oct 14  2014 1k-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 root      root       596305 Jan 21 01:01 1l-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   39549 Oct  6  2015 1m-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  626079 Mar 20 18:43 1n-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 root      root       369125 Jan 21 01:01 1o-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root      1216788 Jan 21 01:01 1p-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       902549 Jan 21 01:01 1q-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       248439 Jan 21 01:01 1r-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       284736 Jan 21 01:01 1s-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root      1116445 Jan 21 01:01 1t-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia 2958367 Nov  5  2015 1u-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  214524 Nov  5  2015 1v-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       518625 Jan 21 01:01 1-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia 2634642 Nov  5  2015 1w-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  483944 Oct 12  2015 1x-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 root      root      1161255 Jan 21 01:01 1y-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  134226 Dec 12  2014 1z-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  906804 Nov  7 08:43 2a-wallpaper.png&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   29273 Apr 12 22:07 2b-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   60631 Mar 27 11:31 2c-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root      1497930 Jan 21 01:01 2d-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       768501 Jan 21 01:01 2e-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       576166 Jan 21 01:01 2f-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       200307 Jan 21 01:01 2g-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  168051 Apr  4  2015 2h-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       467776 Jan 21 01:01 2i-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       397147 Jan 21 01:01 2-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   54136 Oct 17  2015 3-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   66901 Jul 30  2015 4-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia   80100 Mar 30  2015 5-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       703958 Jan 21 01:01 6-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       498830 Jan 21 01:01 7-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       633430 Jan 21 01:01 8-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 root      root       480634 Jan 21 01:01 9-wallpaper.jpg&#xA;&#xA;-rw-r--r-- 1 saparonia saparonia  141363 Oct 18  2014 elementaryos-default.png&#xA;&#xA;root@Florence:/usr/share/backgrounds# cd /usr/share/&#xA;&#xA;root@Florence:/usr/share# chown -R saparonia:saparonia /usr/share/backgrounds/&#xA;&#xA;root@Florence:/usr/share# chmod -R 755 /usr/share/backgrounds/&#xA;&#xA;root@Florence:/usr/share# cd /usr/share/backgrounds/&#xA;&#xA;root@Florence:/usr/share/backgrounds# chmod 644 elementaryos-default.png&#xA;&#xA;root@Florence:/usr/share/backgrounds# &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The greeter now shows each login image when I scroll through users&#xA; It works but I get a scrambled image for about a second when logging in on any user account&lt;/p&gt;&#xA;" OwnerUserId="2867" LastEditorUserId="3757" LastEditDate="2016-05-06T13:44:42.150" LastActivityDate="2016-05-06T13:44:42.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5352" PostTypeId="1" CreationDate="2016-05-06T11:05:02.707" Score="-1" ViewCount="124" Body="&lt;p&gt;I plan on using a laptop so I can stay on the go.  However, while I'm at home I have a need for multiple monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is elementary OS known to support multiple monitors?  What is a good laptop + docking station that you recommend?&lt;/p&gt;&#xA;" OwnerUserId="4969" LastEditorUserId="3757" LastEditDate="2016-05-06T11:41:37.353" LastActivityDate="2016-05-06T13:56:44.023" Title="Recommended laptop with docking port for 2 monitors, compatible with elementary OS?" Tags="|display|laptop|" AnswerCount="1" CommentCount="3" ClosedDate="2016-05-07T10:06:04.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="5354" PostTypeId="2" ParentId="3062" CreationDate="2016-05-06T13:11:04.847" Score="-1" Body="&lt;p&gt;I had a similar issues for the past few months with Freya 0.3.1. This was the final step in my repairs. The steps I did to finally resolve this issue was edited these files (take the time to make backups of each of these before starting these steps):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Navigate to each of these files &amp;amp; using &lt;kbd&gt;F4&lt;/kbd&gt;then editing the following files&gt; &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt;&lt;kbd&gt;Y&lt;/kbd&gt;keep file name the same.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h1&gt;File list&lt;/h1&gt;&#xA;&#xA;&lt;h3&gt;&lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#### elementary OS PPA - http://www.elementaryos.com&#xA;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu trusty main&#xA;deb http://ppa.launchpad.net/elementary-os/daily/ubuntu trusty main&#xA;deb http://ppa.launchpad.net/elementary-os/testing/ubuntu trusty main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;&lt;code&gt;/etc/apt/sources.list.d/elementary.list&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu trusty main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu trusty main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;&lt;code&gt;/etc/ls-release&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=Ubuntu&#xA;&#xA;DISTRIB_RELEASE=14.04&#xA;&#xA;DISTRIB_CODENAME=trusty&#xA;&#xA;DISTRIB_DESCRIPTION=&quot;Ubuntu 14.04 LTS&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Changed to reflect elementary OS Freya&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=&quot;elementary OS&quot;&#xA;&#xA;DISTRIB_RELEASE=0.3.1&#xA;&#xA;DISTRIB_CODENAME=freya&#xA;&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS Freya&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;&lt;code&gt;/etc/os-release&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME=&quot;Ubuntu&quot;&#xA;&#xA;VERSION=&quot;14.04.1 LTS, Trusty Tahr&quot;&#xA;&#xA;ID=ubuntu&#xA;&#xA;ID_LIKE=debian&#xA;&#xA;PRETTY_NAME=&quot;Ubuntu 14.04.1 LTS&quot;&#xA;&#xA;VERSION_ID=&quot;14.04&quot;&#xA;&#xA;HOME_URL=&quot;http://www.ubuntu.com/&quot;&#xA;&#xA;SUPPORT_URL=&quot;http://help.ubuntu.com/&quot;&#xA;&#xA;BUG_REPORT_URL=&quot;http://bugs.launchpad.net/ubuntu/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Changed to reflect Elementary OS Freya&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME=&quot;elementary OS&quot;&#xA;&#xA;VERSION=&quot;0.3.2 Freya&quot;&#xA;&#xA;ID=&quot;elementary OS&quot;&#xA;&#xA;ID_LIKE=ubuntu&#xA;&#xA;PRETTY_NAME=&quot;elementary OS Freya&quot;&#xA;&#xA;VERSION_ID=&quot;0.3.1&quot;&#xA;&#xA;HOME_URL=&quot;http://elementary.io/&quot;&#xA;&#xA;SUPPORT_URL=&quot;http://elementary.io/support/&quot;&#xA;&#xA;BUG_REPORT_URL=&quot;https://bugs.launchpad.net/elementary/+filebug&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I followed the steps here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get -f install&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get install --reinstall humanity-icon-theme elementary-icon-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now my Software Center works as it should. Hope this helps others and saves a great amount of time.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;WARNING . You can potential bork your entire system. I do not recommend attempting this repair without feeling comfortable with using the command line.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4965" LastEditorUserId="3757" LastEditDate="2016-05-06T13:55:28.573" LastActivityDate="2016-05-06T13:55:28.573" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5357" PostTypeId="2" ParentId="5352" CreationDate="2016-05-06T13:56:44.023" Score="1" Body="&lt;p&gt;Yes Elementary OS does support multiple monitors, I myself I have 2 more monitors, and a Lenovo G580 laptop. Its works quite well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll find the monitor setup quite glitchy, and each time when you'll boot up the computer you'll lose your monitor configuration for some reason.&#xA;Keep in mind that Elementary OS is still in Beta.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Color calibration might give you some trouble too.&lt;/p&gt;&#xA;" OwnerUserId="4971" LastActivityDate="2016-05-06T13:56:44.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5359" PostTypeId="2" ParentId="4833" CreationDate="2016-05-06T15:41:37.243" Score="1" Body="&lt;p&gt;Try this quick workaround&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /usr/lib/libunity-electron_notification_fix&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart session.&lt;/p&gt;&#xA;" OwnerUserId="4975" LastEditorUserId="4570" LastEditDate="2016-05-07T04:58:09.060" LastActivityDate="2016-05-07T04:58:09.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5360" PostTypeId="1" CreationDate="2016-05-06T17:07:59.873" Score="1" ViewCount="149" Body="&lt;p&gt;I plug in my headphones I start hearing an hissing noise coming from them. The noise is continuous and doesn't changhe in intensity when I turn up or down the volume, but it stops when I lower it completely or mute it. Also, if the laptop is plugged in and I unplug it, the noise stops even if the pc gets plugged back in, but it starts back again as soon as a sound is played. I found several similar problems posted by other Ubuntu users, but none of those was the same as mine, and none of the solutions posted worked for me. I have an HP Pavilion 15-p258nl, dual boot with Windows 10 (no problems there).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound card:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; *-multimedia:0          &#xA;   description: Audio device&#xA;   product: Broadwell-U Audio Controller&#xA;   vendor: Intel Corporation&#xA;   physical id: 3&#xA;   bus info: pci@0000:00:03.0&#xA;   version: 09&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list&#xA;   configuration: driver=snd_hda_intel latency=0&#xA;   resources: irq:54 memory:c6210000-c6213fff&#xA; *-multimedia:1&#xA;   description: Audio device&#xA;   product: Wildcat Point-LP High Definition Audio Controller&#xA;   vendor: Intel Corporation&#xA;   physical id: 1b&#xA;   bus info: pci@0000:00:1b.0&#xA;   version: 03&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi bus_master cap_list&#xA;   configuration: driver=snd_hda_intel latency=64&#xA;   resources: irq:52 memory:c6214000-c6217fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4976" LastEditorUserId="3757" LastEditDate="2016-05-07T03:03:38.530" LastActivityDate="2016-05-07T03:03:38.530" Title="Headphones noise" Tags="|sound|" AnswerCount="0" CommentCount="4" ClosedDate="2016-10-05T19:24:51.603" ContentLicense="CC BY-SA 3.0" />
  <row Id="5362" PostTypeId="2" ParentId="5344" CreationDate="2016-05-06T20:03:05.353" Score="1" Body="&lt;p&gt;If you installed Nautilus or some program like this, you just have to uninstall it.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-05-06T20:03:05.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5364" PostTypeId="1" AcceptedAnswerId="5367" CreationDate="2016-05-07T00:13:58.313" Score="1" ViewCount="47" Body="&lt;p&gt;In interest of keeping with elementary's beautiful documentation, I ported the stylesheets over to SASS and made a Pandoc template. The result looks something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iHr1v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iHr1v.png&quot; alt=&quot;An example adaptation.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However the &lt;a href=&quot;https://github.com/elementary/mvp/blob/master/styles/support.css&quot; rel=&quot;nofollow noreferrer&quot;&gt;upstream stylesheet&lt;/a&gt; says the file is copyright elementary LLC, while &lt;a href=&quot;https://github.com/elementary/mvp/blob/master/LICENSE.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;the site's official LICENSE.md&lt;/a&gt; states everything is available under MIT. Since there is no &quot;All rights reserved&quot; marker, and the MIT license is still &lt;em&gt;technically&lt;/em&gt; a copyright, it seems legal to release/use this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would it be considered in the &lt;em&gt;spirit&lt;/em&gt; of elementary OS to release documentation templates suitable for other developers' workflows in their own eOS applications, or are developers intended to use their own styles (and only sourcing GUI designs from the provided HIG and font styles/color palettes.)&lt;/p&gt;&#xA;" OwnerUserId="4981" LastActivityDate="2016-05-07T10:23:39.150" Title="Are we allowed to use the documentation stylesheets?" Tags="|design|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5366" PostTypeId="1" CreationDate="2016-05-07T04:12:37.393" Score="1" ViewCount="1031" Body="&lt;p&gt;I have seen a lot of laptops for sale running Ubuntu.I have never seen a laptops elementary OS preinstallated for sale.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone seen laptops preinstallated with elementary OS ?&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-07T23:49:59.280" Title="Are there laptops for sale with elementary OS preinstalled" Tags="|release-freya|ubuntu|laptop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5367" PostTypeId="2" ParentId="5364" CreationDate="2016-05-07T10:23:39.150" Score="1" Body="&lt;h3&gt;Legal&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Yes, you can re-use the styles found here. MIT grants you usage rights for pretty much everything. What you cannot do is use the &quot;elementary&quot; name or logomark in such a way as to suggest endorsement.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Ethical&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Whether or not it is in the &quot;spirit&quot; of elementary to share this work depends on what you are doing with it. Providing a template for use by other developers with better documentation is a noble enough cause, but the true elementary spirit would be making sure that it works consistently and works well.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-05-07T10:23:39.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5369" PostTypeId="2" ParentId="5345" CreationDate="2016-05-07T18:52:49.707" Score="1" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Boot into the live usb and open terminal&lt;/li&gt;&#xA;&lt;li&gt;Open terminal and write this:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;On the window, click on 'Recommended repair' and follow the instructions&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That should work. If not, try to reinstall elementary OS by the default configuration, choosing the 'install alongside windows' option.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-05-07T18:52:49.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5370" PostTypeId="2" ParentId="5366" CreationDate="2016-05-07T22:37:58.570" Score="2" Body="&lt;p&gt;There is a small company in Spain that manufactures ultrabooks with elementary OS installed, but for now only distributed in this country. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info &lt;a href=&quot;http://www.slimbook.es&quot; rel=&quot;nofollow&quot;&gt;Slimbook.es &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They have a video in their webpage showing a Slimbook booting in 12 seconds with elementary OS :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/149xKxdcNIQ&quot; rel=&quot;nofollow&quot;&gt;Slimbook booting &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-05-07T22:37:58.570" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="5372" PostTypeId="2" ParentId="5366" CreationDate="2016-05-07T23:49:59.280" Score="2" Body="&lt;p&gt;In Germany there is a shop &lt;a href=&quot;http://www.tuxedocomputers.com&quot; rel=&quot;nofollow&quot;&gt;Tuxedo&lt;/a&gt;. They offer Linux-specialised hardware. While configuring your new system you can choose elementary OS as pre-installed OS. Other OS's are also Ubuntu-based.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know if they ship international, so have a look at their website.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-05-07T23:49:59.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5376" PostTypeId="1" AcceptedAnswerId="5377" CreationDate="2016-05-08T11:49:42.313" Score="2" ViewCount="7568" Body="&lt;p&gt;I changed the position of the dock to the left of the screen. I don't like it. I would like it back at the bottom as default. To do so we right-click on the dock to access its preferences but it is just not possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dock does not have any space around or between icons where I may right-click. It is a great miscalculation on the part of elementary-design-team that they did not provision for some space around the dock where one could right click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way I could get around to this problem?&lt;/p&gt;&#xA;" OwnerUserId="4319" LastActivityDate="2016-05-08T12:14:33.677" Title="How do I access Dock preferences?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5377" PostTypeId="2" ParentId="5376" CreationDate="2016-05-08T12:14:33.677" Score="3" Body="&lt;p&gt;Open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank --preferences &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-05-08T12:14:33.677" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5378" PostTypeId="2" ParentId="3540" CreationDate="2016-05-08T15:27:33.780" Score="1" Body="&lt;p&gt;I have same issue because elementary os have little bug in installing grub without internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i connect to internet and installing again grub install properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May you have same issue, try to install it with internet connection&lt;/p&gt;&#xA;" OwnerUserId="4985" LastActivityDate="2016-05-08T15:27:33.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5382" PostTypeId="1" AcceptedAnswerId="5388" CreationDate="2016-05-09T12:18:44.440" Score="0" ViewCount="1221" Body="&lt;p&gt;I'm using freya 3.2 and after installing TLP Advanced Power Management the audio jack isn't working anymore. The strange thing is that the notebook's loudspekakers are working regularly (when headphones are not plugged in). Also, the headphones are working in other devices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Detail, what I did between sound-working and sound-not-working was to install tlp and tlp-rdw as described in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1090/how-to-optimize-elementary-os-for-maximal-battery-life-time-on-laptops/1091#1091&quot;&gt;this post&lt;/a&gt;. I also installed gksudo, which didn't work properly, thus I purged it again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Dell XPS 13 (2015). Does anybody have an idea where to start investigating the cause, or maybe even a solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;Headphones are recognized and selected, but sound doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WDnfZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WDnfZ.png&quot; alt=&quot;settings sound&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4847" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-09T22:03:40.740" Title="Why has sound stopped to work on headphones?" Tags="|release-freya|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5383" PostTypeId="2" ParentId="5382" CreationDate="2016-05-09T12:42:50.367" Score="0" Body="&lt;p&gt;Can you check under &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Sound&lt;/code&gt; &gt; &lt;code&gt;Output&lt;/code&gt; tab, the output source, while you have plugged your headphones in ? I assume that wrong output is selected.&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2016-05-09T12:42:50.367" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5384" PostTypeId="1" AcceptedAnswerId="5470" CreationDate="2016-05-09T13:02:44.863" Score="1" ViewCount="1648" Body="&lt;p&gt;When taking a screenshot using &lt;kbd&gt;prt sc&lt;/kbd&gt; the screenshot is saved to the pictures folder. Instead of saving them in pictures I would like them to be saved to another folder instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do this?&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2019-12-27T12:39:35.797" Title="Change the folder where screenshots are saved" Tags="|release-freya|screenshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5386" PostTypeId="1" AcceptedAnswerId="5387" CreationDate="2016-05-09T14:07:21.873" Score="1" ViewCount="68" Body="&lt;p&gt;Whenever I need to open up a LibreOffice application say, the Writer, it's there in the Applications tab alright. But what my problem is that there are 6 LibreOffice apps in total, and they eat a lot of space in the Applications drawer. Is there any way I can put them into one single folder-like thingy for example Office?&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2016-05-09T18:15:18.143" Title="How to encompass LibreOffice apps in the &quot;Applications&quot; tab so that they come under 1 banner which is &quot;LibreOffice&quot;?" Tags="|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5387" PostTypeId="2" ParentId="5386" CreationDate="2016-05-09T18:15:18.143" Score="0" Body="&lt;p&gt;The applications menu doesn't support folders at this time. &lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-05-09T18:15:18.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5388" PostTypeId="2" ParentId="5382" CreationDate="2016-05-09T22:03:40.740" Score="1" Body="&lt;p&gt;Actually I found this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/865/no-sound-when-plugging-in-headphones&quot;&gt;question&lt;/a&gt; which is very similar and has a solution in a &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/865/no-sound-when-plugging-in-headphones#comment1524_865&quot;&gt;comment&lt;/a&gt;..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to activate the correct sound card in the &lt;code&gt;alsamixer&lt;/code&gt; equalizer. This can be done by typing &lt;code&gt;alsamixer&lt;/code&gt; in a terminal and using &lt;code&gt;F6&lt;/code&gt; to choose a sound card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If speakers, headphones, mics, etc. are muted, this can also be changed with the alsamixer equalizer.&lt;/p&gt;&#xA;" OwnerUserId="4847" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-09T22:03:40.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5389" PostTypeId="1" AcceptedAnswerId="5390" CreationDate="2016-05-09T22:17:20.340" Score="-1" ViewCount="1769" Body="&lt;p&gt;I appreciate it's not Windows, so please don't shoot me down, but after using Windows for 20 years, and trying Linux numerous times, it's never gotten anywhere close, except now, with elementary.   It actually feels quite like my former home, except for 2 things, which I really hope I can change.   They might seem small and insignificant, but they are a HUGE barrier for me, especially as I have no choice but to run Windows at work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1/ I really need to have the window controls (close/minimize/maximize) on the same side as windows.   It's very tiresome to automatically go to the wrong side each time, having consistency for me, between windows and elementary is essential.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2/ Single Click, Double Click behavior.   Again, for the same reasons, habits are hard to break, and switching between OS and home and OS at work needs to be as seamless as possible.  I need to be able to set a similar Windows style mouse click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I can sort these seemingly small, but to me, huge barriers, I think I could really get to love this flavor of Linux.   To the developers, if there was a one-click, &quot;make my OS feel more at home&quot; wizard that make it work like Windows, (or Mac, or other operating systems), setting all these things, this would be a huge step in getting a good early user experience.&lt;/p&gt;&#xA;" OwnerUserId="4998" LastActivityDate="2016-05-10T01:04:08.910" Title="Making it work more like Windows" Tags="|user-interface|microsoft-windows|tweak-tool|" AnswerCount="2" CommentCount="1" ClosedDate="2016-05-10T16:13:14.620" ContentLicense="CC BY-SA 3.0" />
  <row Id="5390" PostTypeId="2" ParentId="5389" CreationDate="2016-05-09T23:11:15.907" Score="3" Body="&lt;p&gt;Just install Elementary Tweaks. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2469/how-to-install-elementary-tweaks-on-freya&quot;&gt;Here&lt;/a&gt; you can learn how to install it. With that, you can set the double-click behaviour and the location of the window control buttons. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once installed, go to the system settings-&gt;Tweaks and there you'll find what you're looking for.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-09T23:11:15.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5391" PostTypeId="2" ParentId="5389" CreationDate="2016-05-10T01:04:08.910" Score="0" Body="&lt;p&gt;To get the windows style window buttons run the following command in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Log out and back in&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-10T01:04:08.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5394" PostTypeId="2" ParentId="5330" CreationDate="2016-05-10T07:43:07.307" Score="1" Body="&lt;p&gt;What is the process you follow to install the spanish language? It should be as follows (at least is how I installed spanish several times):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Go to System settings &gt; Language and region&lt;/li&gt;&#xA;&lt;li&gt;Unlock the field edition with your password.&lt;/li&gt;&#xA;&lt;li&gt;Click the &quot;+&quot; symbol and select your spanish variant. Wait until it finishes the installation. When it is ready, you may say the following message &quot;Language compatibility is not completely installed&quot; (or something similar). In this case, click on &quot;complete installation&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select spanish on the language list on the left.&lt;/li&gt;&#xA;&lt;li&gt;Select your region and your format on the drop-down lists.&lt;/li&gt;&#xA;&lt;li&gt;Click on &quot;Change system language&quot; and in &quot;Change language&quot;. &lt;/li&gt;&#xA;&lt;li&gt;Reboot or close and open session again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2767" LastEditDate="2016-05-10T08:59:13.617" LastActivityDate="2016-05-10T08:59:13.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5395" PostTypeId="1" CreationDate="2016-05-10T11:31:18.427" Score="3" ViewCount="219" Body="&lt;p&gt;When using the file dialog in Windows it's possible to specify a URL instead of a local file. Is it at all possible to do this in elementary OS? When trying what's in the image below, it simply does nothing when clicking open. I'm running the latest ISO from the site.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8Lqhp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8Lqhp.png&quot; alt=&quot;Example&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5002" LastEditorUserId="308" LastEditDate="2016-06-13T11:20:40.637" LastActivityDate="2016-09-24T22:32:44.080" Title="Can I use URLs in the Open File dialog?" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5397" PostTypeId="1" CreationDate="2016-05-10T14:37:30.253" Score="1" ViewCount="1241" Body="&lt;p&gt;Every time i turn on the two finger scrolling in the system settings, it wont turn on and when i close the system settings the two finger scrolling setting unchecks itself. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything worked fine in Windows 8.1.&lt;/p&gt;&#xA;" OwnerUserId="5005" LastActivityDate="2016-09-10T01:45:36.603" Title="Touchpad two finger scrolling won't turn on" Tags="|mouse|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5398" PostTypeId="2" ParentId="5395" CreationDate="2016-05-10T15:20:25.003" Score="1" Body="&lt;p&gt;The short answer is &quot;no&quot; - not at the moment. You can access remote files and folders using addresses such as &lt;a href=&quot;ftp://user@example.com/&quot; rel=&quot;nofollow&quot;&gt;ftp://user@example.com/&lt;/a&gt;...  or through WebDAV shares but you cannot use it like a web browser.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-05-10T15:20:25.003" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5399" PostTypeId="1" CreationDate="2016-05-10T15:39:03.277" Score="14" ViewCount="12803" Body="&lt;p&gt;Does anyone know how to make the mouse scrollwheel go faster?&lt;/p&gt;&#xA;" OwnerUserId="5008" LastEditorUserId="68" LastEditDate="2016-10-01T19:24:18.817" LastActivityDate="2019-08-13T13:04:33.630" Title="How can I adjust the mouse scrollwheel speed?" Tags="|settings|system|desktop|mouse|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5402" PostTypeId="1" CreationDate="2016-05-11T01:55:24.300" Score="1" ViewCount="279" Body="&lt;p&gt;Anyone know how to show Google Chrome in the wingpanel? I know it's open, but just not showing up there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YdLBX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YdLBX.png&quot; alt=&quot;wingpanel&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5013" LastEditorUserId="5565" LastEditDate="2016-10-06T04:25:38.437" LastActivityDate="2016-10-06T04:25:47.763" Title="How to show Google Chrome in the wingpanel?" Tags="|wingpanel|google-chrome|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5403" PostTypeId="2" ParentId="1617" CreationDate="2016-05-11T13:11:44.060" Score="0" Body="&lt;p&gt;Check the Internet connection.Go to system settings.Softwares and updates in that click for Ubuntu Software.see the option Download from and check the better server for your location ans set that.and Software updater will work.&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&lt;/p&gt;&#xA;" OwnerUserId="5017" LastActivityDate="2016-05-11T13:11:44.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5404" PostTypeId="1" CreationDate="2016-05-11T14:22:28.650" Score="1" ViewCount="407" Body="&lt;p&gt;I tried to add user on GUI but nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already tried by command line but I recived the message below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;useradd: existing lock file /etc/subuid.lock without a PID&#xA;useradd: não foi possível travar /etc/subuid; tente novamente mais tarde.&#xA;adduser: '/usr/sbin/useradd -d /home/cfs -g cfs -s /bin/bash -u 1004 cfs' retornou código de erro 16. Saindo.&lt;/p&gt;&#xA;" OwnerUserId="5018" LastActivityDate="2018-03-30T11:16:16.333" Title="Can't add user on system" Tags="|user|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5405" PostTypeId="1" AcceptedAnswerId="5414" CreationDate="2016-05-11T16:16:10.980" Score="3" ViewCount="283" Body="&lt;p&gt;I just realized that all elementary apps, unlike all other apps apps, are missing the &lt;em&gt;Always on top&lt;/em&gt; option (among many others). Right clicking on the top bar in their windows only shows the &lt;em&gt;Close&lt;/em&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1457/how-to-set-the-terminal-to-always-on-top-in-elementary-os&quot;&gt;How to set the terminal to &amp;quot;always on top&amp;quot; in elementary OS?&lt;/a&gt; shows a way to by-pass this issue, but I'd like to know if this is by design, and if it is, what is the reasoning behind it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There does not seem to be any immediate benefit from hiding this (these) option(s), specially since the &lt;em&gt;Close&lt;/em&gt; option is still there and it is obviously redundant (one can close an app via the X button, via &lt;code&gt;Planck&lt;/code&gt;, or with the Alt+F4 shortcut).&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-12T18:01:34.490" Title="Why are all elementary specific apps missing the 'Always on top' option?" Tags="|applications|window-management|window-manager|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5407" PostTypeId="1" CreationDate="2016-05-11T22:00:18.997" Score="-1" ViewCount="1736" Body="&lt;p&gt;I installed elementary OS Freya 64bit dual boot with Windows 7 on an ASUS Z54C laptop.&#xA;I have an extremely slow Wifi connection on elementary OS but when I boot on Windows 7 it's really fast. How do I get my wifi working? When I go to Google.com it takes like 2 minutes to load.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: The internet was so slow that I uninstalled elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: May 12th 2016&#xA;Installed Freya on my old computer&lt;/p&gt;&#xA;" OwnerUserId="5021" LastEditorUserId="5021" LastEditDate="2016-05-12T20:24:44.713" LastActivityDate="2018-07-13T14:04:32.110" Title="How to optimize internet speed?" Tags="|wifi|internet|asus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5408" PostTypeId="1" CreationDate="2016-05-12T02:40:42.113" Score="1" ViewCount="67" Body="&lt;p&gt;When I login in my elementary OS system my display size is set too large. My graphics are Intel(R) G33/G31 Express Chipset Family.&lt;/p&gt;&#xA;" OwnerUserId="5023" LastEditorUserId="26" LastEditDate="2016-05-17T22:45:48.167" LastActivityDate="2016-09-24T20:42:26.500" Title="Display size issue in elemantary os" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5409" PostTypeId="2" ParentId="5404" CreationDate="2016-05-12T04:42:00.023" Score="1" Body="&lt;p&gt;The error message means no process is actually using the existing lock file, though its existence prevents your current action from completing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Delete it and try again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /etc/subuid.lock&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="137" LastActivityDate="2016-05-12T04:42:00.023" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5410" PostTypeId="1" AcceptedAnswerId="5426" CreationDate="2016-05-12T07:36:42.943" Score="1" ViewCount="519" Body="&lt;p&gt;After running sudo-apt-get update i got this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit http://security.ubuntu.com trusty-security InRelease&#xA;Ign http://archive.canonical.com trusty InRelease                              &#xA;Ign http://gb.archive.ubuntu.com trusty InRelease                              &#xA;Hit http://archive.canonical.com trusty Release.gpg                            &#xA;Hit http://gb.archive.ubuntu.com trusty-updates InRelease                      &#xA;Hit http://security.ubuntu.com trusty-security/main Sources                    &#xA;Hit http://gb.archive.ubuntu.com trusty-backports InRelease                    &#xA;Hit http://archive.canonical.com trusty Release                                &#xA;Hit http://gb.archive.ubuntu.com trusty Release.gpg                            &#xA;Hit http://security.ubuntu.com trusty-security/restricted Sources              &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/main Sources                   &#xA;Hit http://security.ubuntu.com trusty-security/universe Sources                &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/restricted Sources             &#xA;Hit http://archive.canonical.com trusty/partner amd64 Packages                 &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Sources              &#xA;Ign http://repo.vivaldi.com stable InRelease                                   &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/universe Sources               &#xA;Hit http://archive.canonical.com trusty/partner i386 Packages                  &#xA;Hit http://security.ubuntu.com trusty-security/main amd64 Packages             &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/multiverse Sources             &#xA;Hit http://archive.canonical.com trusty/partner Translation-en                 &#xA;Hit http://security.ubuntu.com trusty-security/restricted amd64 Packages       &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/main amd64 Packages            &#xA;Hit http://security.ubuntu.com trusty-security/universe amd64 Packages         &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/restricted amd64 Packages      &#xA;Hit http://security.ubuntu.com trusty-security/multiverse amd64 Packages       &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/universe amd64 Packages        &#xA;Hit http://security.ubuntu.com trusty-security/main i386 Packages              &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/multiverse amd64 Packages      &#xA;Hit http://security.ubuntu.com trusty-security/restricted i386 Packages        &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/main i386 Packages             &#xA;Hit http://security.ubuntu.com trusty-security/universe i386 Packages          &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/restricted i386 Packages       &#xA;Hit http://security.ubuntu.com trusty-security/multiverse i386 Packages        &#xA;Ign http://repo.vivaldi.com stable InRelease                                   &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/universe i386 Packages         &#xA;Hit http://security.ubuntu.com trusty-security/main Translation-en             &#xA;Hit http://repo.vivaldi.com stable Release.gpg                                 &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/multiverse i386 Packages       &#xA;Hit http://security.ubuntu.com trusty-security/multiverse Translation-en       &#xA;Hit http://repo.vivaldi.com stable Release.gpg                                 &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/main Translation-en            &#xA;Hit http://security.ubuntu.com trusty-security/restricted Translation-en       &#xA;Hit http://repo.vivaldi.com stable Release                                     &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/multiverse Translation-en      &#xA;Hit http://security.ubuntu.com trusty-security/universe Translation-en         &#xA;Hit http://repo.vivaldi.com stable Release                                     &#xA;Hit http://repo.vivaldi.com stable/main amd64 Packages                         &#xA;Hit http://repo.vivaldi.com stable/main i386 Packages                          &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/restricted Translation-en      &#xA;Hit http://gb.archive.ubuntu.com trusty-updates/universe Translation-en        &#xA;Hit http://gb.archive.ubuntu.com trusty Release                                &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/main Sources                 &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/restricted Sources           &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/universe Sources             &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/multiverse Sources           &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/main amd64 Packages          &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/restricted amd64 Packages    &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/universe amd64 Packages      &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/multiverse amd64 Packages    &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/main i386 Packages           &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/restricted i386 Packages     &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/universe i386 Packages       &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/multiverse i386 Packages     &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/main Translation-en          &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/multiverse Translation-en    &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/restricted Translation-en    &#xA;Hit http://gb.archive.ubuntu.com trusty-backports/universe Translation-en      &#xA;Hit http://gb.archive.ubuntu.com trusty/main Sources                           &#xA;Hit http://gb.archive.ubuntu.com trusty/restricted Sources                     &#xA;Hit http://gb.archive.ubuntu.com trusty/universe Sources                       &#xA;Hit http://repo.vivaldi.com stable/main amd64 Packages                         &#xA;Hit http://gb.archive.ubuntu.com trusty/multiverse Sources                     &#xA;Hit http://repo.vivaldi.com stable/main i386 Packages                          &#xA;Hit http://gb.archive.ubuntu.com trusty/main amd64 Packages                    &#xA;Hit http://gb.archive.ubuntu.com trusty/restricted amd64 Packages              &#xA;Hit http://gb.archive.ubuntu.com trusty/universe amd64 Packages                &#xA;Hit http://gb.archive.ubuntu.com trusty/multiverse amd64 Packages              &#xA;Hit http://gb.archive.ubuntu.com trusty/main i386 Packages                     &#xA;Hit http://gb.archive.ubuntu.com trusty/restricted i386 Packages               &#xA;Hit http://gb.archive.ubuntu.com trusty/universe i386 Packages                 &#xA;Hit http://gb.archive.ubuntu.com trusty/multiverse i386 Packages               &#xA;Hit http://gb.archive.ubuntu.com trusty/main Translation-en_GB                 &#xA;Hit http://gb.archive.ubuntu.com trusty/main Translation-en                    &#xA;Hit http://gb.archive.ubuntu.com trusty/multiverse Translation-en_GB           &#xA;Hit http://gb.archive.ubuntu.com trusty/multiverse Translation-en              &#xA;Hit http://gb.archive.ubuntu.com trusty/restricted Translation-en_GB           &#xA;Hit http://gb.archive.ubuntu.com trusty/restricted Translation-en              &#xA;Hit http://gb.archive.ubuntu.com trusty/universe Translation-en_GB             &#xA;Hit http://gb.archive.ubuntu.com trusty/universe Translation-en                &#xA;Ign http://gb.archive.ubuntu.com trusty/main Translation-en_US                 &#xA;Ign http://gb.archive.ubuntu.com trusty/multiverse Translation-en_US           &#xA;Ign http://gb.archive.ubuntu.com trusty/restricted Translation-en_US           &#xA;Ign http://gb.archive.ubuntu.com trusty/universe Translation-en_US             &#xA;Ign http://repo.vivaldi.com stable/main Translation-en_GB                      &#xA;Ign http://repo.vivaldi.com stable/main Translation-en                         &#xA;Ign http://repo.vivaldi.com stable/main Translation-en_US                      &#xA;Ign http://repo.vivaldi.com stable/main Translation-en_GB                      &#xA;Ign http://repo.vivaldi.com stable/main Translation-en                         &#xA;Ign http://repo.vivaldi.com stable/main Translation-en_US                      &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://dl.google.com stable InRelease                                      &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release.gpg                                    &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable Release                                        &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://dl.google.com stable/main amd64 Packages                            &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty InRelease                                  &#xA;Ign http://ppa.launchpad.net trusty InRelease                                  &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Ign http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://dl.google.com stable/main Translation-en_GB                         &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Ign http://dl.google.com stable/main Translation-en                            &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://dl.google.com stable/main Translation-en_US                         &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main Sources                               &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty Release.gpg                                &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Ign http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty Release                                    &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://ppa.launchpad.net trusty/main amd64 Packages/DiffIndex              &#xA;Ign http://ppa.launchpad.net trusty/main i386 Packages/DiffIndex               &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Hit http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;Hit http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;Hit http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en_GB                     &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en                        &#xA;Ign http://ppa.launchpad.net trusty/main Translation-en_US                     &#xA;Err http://ppa.launchpad.net trusty/main amd64 Packages                        &#xA;  404  Not Found&#xA;Err http://ppa.launchpad.net trusty/main i386 Packages                         &#xA;  404  Not Found&#xA;W: Failed to fetch http://ppa.launchpad.net/justsomedood/justsomeelementary/ubuntu/dists/trusty/main/binary-amd64/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/justsomedood/justsomeelementary/ubuntu/dists/trusty/main/binary-i386/Packages  404  Not Found&#xA;&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, I got this &quot;Partial Upgrade&quot; bug, I'm unsure what caused it, maybe some broken packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Elementary OS Freya 0.3.2&lt;/p&gt;&#xA;" OwnerUserId="1153" LastActivityDate="2016-05-14T07:46:21.870" Title="broken packages after running sudo apt-get update" Tags="|updates|ubuntu|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5411" PostTypeId="1" CreationDate="2016-05-12T08:47:46.997" Score="1" ViewCount="457" Body="&lt;p&gt;have a strange problem with the dock.   I have installed Android Studio, and used &quot;Create Desktop Entry&quot;, which added it to the Applications menu, I then dragged this onto the Dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the application is closed, it's fine, it shows a single entry, but when I open Android Studio, it then have two dock icons, as if the launcher and the open application are treated as separate items.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No other applications do this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have deleted the plan config file and recreated, and it's done the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this annoyance?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="4998" LastActivityDate="2016-05-12T08:47:46.997" Title="Problem with double icons in Plank dock" Tags="|plank|" AnswerCount="0" CommentCount="2" ClosedDate="2016-05-24T22:05:56.347" ContentLicense="CC BY-SA 3.0" />
  <row Id="5412" PostTypeId="2" ParentId="1879" CreationDate="2016-05-12T14:38:00.433" Score="-1" Body="&lt;p&gt;I have the same problem here. I just set the nomodeset option, but when the system starts, my monitor blinks a few times, I can see that some of controls are being loaded, but them I get a black screen.  Using Alt+F6 I can access the terminal where I list all process and can't find any running instance of lightdm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, i try to execute lightdm again using sudo service lightdm start, and I get this error: &#xA;nouveau 0000:00:12.1: DDC responded, but no EDID for DVI-D-1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the loading process starts again, flashing my monitor few times and than... black screen. Go back to terminal and see that lightdm instance was terminated...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues?&#xA;My computer is a 10 yo AMD Atlhon XP with a GeForce FX 5500&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="5025" LastActivityDate="2016-05-12T14:38:00.433" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5414" PostTypeId="2" ParentId="5405" CreationDate="2016-05-12T18:01:34.490" Score="1" Body="&lt;p&gt;It has been done for apps made specifically for elementary os,and this is done by design. Fortunately in Loki this 'limitation' is removed and you will be able to see all options in near future.&lt;/p&gt;&#xA;" OwnerUserId="2427" LastActivityDate="2016-05-12T18:01:34.490" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5417" PostTypeId="2" ParentId="5407" CreationDate="2016-05-12T20:22:56.843" Score="1" Body="&lt;p&gt;RESET THE MODEM &amp;amp; ROUTER (it worked)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that didn't work for you&#xA;Go to &#xA;System Settings &gt;&#xA;Network &gt;&#xA;Options &gt;&#xA;IPv6 Settings &gt;&#xA;Method &gt; &#xA;Change from Automatic to ignore &gt;&#xA;Save&lt;/p&gt;&#xA;" OwnerUserId="5021" LastEditorUserId="5021" LastEditDate="2016-05-12T21:57:39.383" LastActivityDate="2016-05-12T21:57:39.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5418" PostTypeId="2" ParentId="5397" CreationDate="2016-05-12T22:35:42.210" Score="2" Body="&lt;p&gt;Have a look here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4270/two-finger-scroll-is-not-working-for-my-touchpad-of-asus-x200ma?rq=1&quot;&gt;Two-finger Scroll is not working for my touchpad of ASUS X200MA&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe you have better luck in terminal...&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-12T22:35:42.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5419" PostTypeId="1" AcceptedAnswerId="6714" CreationDate="2016-05-12T23:48:39.063" Score="0" ViewCount="3646" Body="&lt;p&gt;I'm trying to install musescore but this error comes ahead:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L034j.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L034j.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo apt-get install -f&lt;/code&gt; but nothing happens. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-06-13T14:43:15.860" Title="Problems with broken packages" Tags="|package-management|dependencies|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5420" PostTypeId="1" AcceptedAnswerId="5430" CreationDate="2016-05-13T07:01:41.120" Score="1" ViewCount="1238" Body="&lt;p&gt;After one of the latest updates and a reboot my network manager is not able to start anymore, dmesg tells me that it gets killed every time it wants to start. How can I fix that? No internet is a pretty huge problem for me...&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2016-05-14T05:57:08.887" Title="Network manager broken after update" Tags="|internet|" AnswerCount="2" CommentCount="5" ClosedDate="2016-05-14T18:07:53.633" ContentLicense="CC BY-SA 3.0" />
  <row Id="5421" PostTypeId="2" ParentId="5419" CreationDate="2016-05-13T07:02:10.747" Score="0" Body="&lt;p&gt;Install them manually, that should fix it.&lt;/p&gt;&#xA;" OwnerUserId="310" LastActivityDate="2016-05-13T07:02:10.747" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5422" PostTypeId="1" CreationDate="2016-05-13T08:47:19.470" Score="3" ViewCount="141" Body="&lt;p&gt;Yesterday I updated to elementary 3.19 ..59 and today came just another small one and after that the network connection disappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The system had suggested an upgrade of some elder packages as network-manager and some others. How can I do it without an network connection??&lt;/p&gt;&#xA;" OwnerUserId="5030" LastEditorUserId="9" LastEditDate="2016-05-14T14:09:58.730" LastActivityDate="2016-05-14T14:09:58.730" Title="No network conection after last upgrade yesterday" Tags="|networking|" AnswerCount="1" CommentCount="3" ClosedDate="2016-05-14T15:43:28.083" ContentLicense="CC BY-SA 3.0" />
  <row Id="5424" PostTypeId="2" ParentId="5420" CreationDate="2016-05-13T12:04:18.547" Score="0" Body="&lt;p&gt;Try running the following to downgrade the network manager&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libnl-3-200=3.2.21-1 libnl-route-3-200=3.2.21-1 libnl-genl-3-200=3.2.21-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-13T12:04:18.547" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5425" PostTypeId="2" ParentId="5422" CreationDate="2016-05-13T12:09:30.370" Score="0" Body="&lt;p&gt;I did solve it myself. Start the computer in text mode with &quot;restore mode&quot; in GRUB and let it search for &quot;bad files&quot;, after that you must choice &quot;start modem&quot; an after that the missing packages downloads and installs - all in text mode. Then you can restart in usual mode. All done! &lt;/p&gt;&#xA;" OwnerUserId="5030" LastActivityDate="2016-05-13T12:09:30.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5426" PostTypeId="2" ParentId="5410" CreationDate="2016-05-13T15:11:20.557" Score="2" Body="&lt;p&gt;I have the same problem since few weeks ago, and it is due to this repository: &lt;a href=&quot;http://ppa.launchpad.net/justsomedood/justsomeelementary&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/justsomedood/justsomeelementary&lt;/a&gt;. It looks like the repository has just disappeared. If you check the the launchpad's  address &lt;a href=&quot;http://ppa.launchpad.net/justsomedood/justsomeelementary/ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/justsomedood/justsomeelementary/ubuntu/&lt;/a&gt; you gonna find the message 404:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not Found&#xA;The requested URL /justsomedood/justsomeelementary/ubuntu/ was not found on this server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's why I have the repository disabled for the moment, waiting its came-back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edited:&lt;br&gt;&#xA;&lt;strong&gt;To disable the repository.&lt;/strong&gt;&#xA;Software Center &gt; (menu) Edition &gt; (button) Sources &gt; (new window - 2 tab) Other Sources &gt; Look for &lt;em&gt;&quot;http ://ppa.launchpad.net/justsomedood/justsomeelementary/ubuntu/&quot;&lt;/em&gt; and unchecked the box. Don't forget to save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edited 2:&lt;br&gt;&#xA;Has been confirmed that the developer took down the repository but it's &lt;strong&gt;temporally&lt;/strong&gt;. That's due to he was getting a whole lot of dependency errors when trying to build the latest packages.  &lt;/p&gt;&#xA;" OwnerUserId="5032" LastEditorUserId="5032" LastEditDate="2016-05-14T07:46:21.870" LastActivityDate="2016-05-14T07:46:21.870" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5427" PostTypeId="1" CreationDate="2016-05-13T20:57:44.040" Score="1" ViewCount="49" Body="&lt;p&gt;I get this error and it says to correct using the partitioner.  Any attempt to do so crashes the intaller.&lt;/p&gt;&#xA;" OwnerUserId="5036" LastActivityDate="2016-05-14T18:42:44.210" Title="No root directory found error during installation?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5428" PostTypeId="1" CreationDate="2016-05-13T23:46:19.030" Score="0" ViewCount="986" Body="&lt;p&gt;Just downloaded the most recent update today. After restart, I have no networking capability whatsoever. No wifi, no wired, nothing. Opening networking through settings gives me an error message to the effect of &quot;your network settings aren't compatible with this build &quot; (can't remember the exact wording. Without any internet, I can't download any updates or try to undo the last one. If it matters, I'm using a Lenovo yoga laptop. Help!!!&lt;/p&gt;&#xA;" OwnerUserId="5037" LastActivityDate="2016-05-15T04:49:02.280" Title="No network capability" Tags="|settings|updates|wifi|networking|" AnswerCount="2" CommentCount="4" ClosedDate="2016-05-17T07:08:30.917" ContentLicense="CC BY-SA 3.0" />
  <row Id="5430" PostTypeId="2" ParentId="5420" CreationDate="2016-05-14T05:33:18.097" Score="2" Body="&lt;p&gt;I had the same problem and downgrading the &lt;code&gt;libnl&lt;/code&gt; packages worked too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I rebooted using a live USB , downloaded &lt;code&gt;libnl-3-200-3.2.21-1_amd64.deb&lt;/code&gt;, &lt;code&gt;libnl-genl-3-200_3.2.21-1_amd64.deb&lt;/code&gt; and &lt;code&gt;libnl-route-3-200_3.2.21-1_amd64.deb&lt;/code&gt; from &lt;a href=&quot;http://archive.ubuntu.com/ubuntu/pool/main/libn/libnl3/&quot; rel=&quot;nofollow&quot;&gt;http://archive.ubuntu.com/ubuntu/pool/main/libn/libnl3/&lt;/a&gt; , installed it using &lt;code&gt;dpkg -i&lt;/code&gt; and rebooted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Internet should be working now.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-14T05:57:08.887" LastActivityDate="2016-05-14T05:57:08.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5433" PostTypeId="2" ParentId="5428" CreationDate="2016-05-14T10:42:17.147" Score="2" Body="&lt;p&gt;Because this is most visited question regarding this topic on Elementary OS, I have solution for you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/727462/141980&quot;&gt;There is solution described on AskUbuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To cite the answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is caused by a regression introduced with a fix for &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/libnl3/+bug/1511735&quot; rel=&quot;nofollow noreferrer&quot;&gt;libnl3 bug #1511735&lt;/a&gt;.&lt;br&gt;&#xA;Resulting network-manager crash has been reported in &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1539513&quot; rel=&quot;nofollow noreferrer&quot;&gt;network-manager bug #1539513&lt;/a&gt; or &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1539634&quot; rel=&quot;nofollow noreferrer&quot;&gt;network-manager bug #1539634&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and you need to downgrade these packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first link helped me, hope it will help you too&lt;/p&gt;&#xA;" OwnerUserId="5029" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-14T10:42:17.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5435" PostTypeId="1" CreationDate="2016-05-14T13:38:18.807" Score="-1" ViewCount="217" Body="&lt;p&gt;I have an old MAC hard drive I am trying to recover using an inateck housing.  when I plug it in via USB and try to access the desktop folder via the users file I receive the following statement:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;This folder does not belong to you.  You don't have permission to view&#xA;  this folder&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is so much data on this drive that I have got to get to, any help will be seriously appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5050" LastEditorUserId="5029" LastEditDate="2016-05-14T16:15:10.277" LastActivityDate="2016-05-18T03:55:49.980" Title="Cannot access Mac hard drive" Tags="|hardware|macbook|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="5436" PostTypeId="1" CreationDate="2016-05-14T13:57:49.277" Score="0" ViewCount="2062" Body="&lt;p&gt;I was thinking of installing Freya on an old laptop I used to work on. The laptop is a Compaq CQ58 and it has 4GB of RAM, an AMD E1-1200 1.4 GHz dual core processor, and AMD Radeon HD 7310 graphics. I was wondering if I should choose the 32-bit or the 64-bit version of elementary, because a friend installed the 64 bit version on the same laptop and he said the experience was fine overall but sluggish at times .&lt;/p&gt;&#xA;" OwnerUserId="4779" LastEditorUserId="5565" LastEditDate="2016-10-07T02:07:06.060" LastActivityDate="2016-10-07T02:07:06.060" Title="Should I use the 32-bit or 64-bit system on a low-end laptop?" Tags="|system-installation|cpu|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5437" PostTypeId="1" AcceptedAnswerId="5438" CreationDate="2016-05-14T15:14:25.650" Score="2" ViewCount="154" Body="&lt;p&gt;As explained here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4183/how-can-i-fix-networking-wi-fi-and-ethernet-not-being-available-after-update&quot;&gt;How can I fix Networking, Wi-Fi and Ethernet, not being available after update?&lt;/a&gt; there is a regression bug that will cause some systems to lose network entirely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lewis' &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4184/9&quot;&gt;excellent answer&lt;/a&gt; solves the issue, but after applying it I am immediately requested by the system to upgrade the downgraded libraries:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FGqOl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FGqOl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I can tell, I have the &lt;em&gt;Poposed&lt;/em&gt; repository[*] deselected:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vfOdk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vfOdk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lewis says to &quot;so comment out the lines in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&quot;, but I'm not sure which lines he is referring to.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;[*]: I actually have &lt;strong&gt;all of the repositories&lt;/strong&gt; in the &lt;em&gt;Updates&lt;/em&gt; tab deselected. Is this how they should show?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-05-14T15:41:18.007" Title="Avoid no network issue" Tags="|networking|updates|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5438" PostTypeId="2" ParentId="5437" CreationDate="2016-05-14T15:41:18.007" Score="4" Body="&lt;p&gt;Well, quoting &lt;a href=&quot;https://askubuntu.com/a/727462/141980&quot;&gt;this awesome answer on askubuntu&lt;/a&gt;, you have to mark the packages on hold:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark hold libnl-3-200 libnl-genl-3-200 libnl-route-3-200&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That worked for me really great&lt;/p&gt;&#xA;" OwnerUserId="5029" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-14T15:41:18.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5440" PostTypeId="2" ParentId="5427" CreationDate="2016-05-14T18:42:44.210" Score="1" Body="&lt;p&gt;If you know what you are doing I recommend to use different distribution, like &lt;strong&gt;gParted&lt;/strong&gt;. You didn't specified version, do you use latest Elementary version?&lt;/p&gt;&#xA;" OwnerUserId="4943" LastActivityDate="2016-05-14T18:42:44.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5442" PostTypeId="2" ParentId="5428" CreationDate="2016-05-15T01:44:16.570" Score="0" Body="&lt;p&gt;I had the same problem and downgrading the &lt;code&gt;libnl&lt;/code&gt; packages worked too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I rebooted using a live USB , downloaded &lt;code&gt;libnl-3-200-3.2.21-1_amd64.deb&lt;/code&gt;, &lt;code&gt;libnl-genl-3-200_3.2.21-1_amd64.deb&lt;/code&gt; and &lt;code&gt;libnl-route-3-200_3.2.21-1_amd64.deb&lt;/code&gt; from &lt;a href=&quot;http://archive.ubuntu.com/ubuntu/pool/main/libn/libnl3/&quot; rel=&quot;nofollow&quot;&gt;http://archive.ubuntu.com/ubuntu/pool/main/libn/libnl3/&lt;/a&gt; , installed it using &lt;code&gt;dpkg -i&lt;/code&gt; and rebooted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Internet should be working now.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-15T01:44:16.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5444" PostTypeId="1" AcceptedAnswerId="5448" CreationDate="2016-05-15T05:16:33.023" Score="1" ViewCount="66" Body="&lt;p&gt;Sometimes when I am learning to use Blender or programming when my mouse goes to the bottom plank pops up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is very annoying so I would like a keyboard shortcut to disable it&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-12-29T14:47:50.203" Title="Temporily disable plank (with a keyboard shortcut)" Tags="|release-freya|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5446" PostTypeId="2" ParentId="4655" CreationDate="2016-05-15T12:38:01.130" Score="1" Body="&lt;p&gt;I fixed my issue by creating a 100MB &quot;swap space&quot; partition before my main filesystem.&lt;/p&gt;&#xA;" OwnerUserId="4418" LastActivityDate="2016-05-15T12:38:01.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5447" PostTypeId="1" AcceptedAnswerId="5490" CreationDate="2016-05-15T19:14:00.650" Score="1" ViewCount="105" Body="&lt;p&gt;I have an elementary freya that works nicely except for one VERY annoying thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the the current file is highlighted and I want to get to the one next to it, when I press the right arrow,    it starts going through the files beginning at the file to the far left first instead of just going to the file next to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to fix this?!?!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(The same thing happens for the left arrow ... meaning it starts from the far right)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems to be in Grid view only (which I use exclusively)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the GIF below, whenever a folder is highlighted, I'm pressing either left or right to get the folder next to it. However, it jumps to different folders as you can see.  ANNOYING!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fTQhG.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fTQhG.gif&quot; alt=&quot;Gif of the problem&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5067" LastEditorUserId="5067" LastEditDate="2016-05-19T13:49:20.763" LastActivityDate="2016-05-19T15:43:54.630" Title="Annoying problem with arrows to navigate files" Tags="|release-freya|elementary-website|" AnswerCount="1" CommentCount="2" ClosedDate="2016-05-20T19:45:16.667" ContentLicense="CC BY-SA 3.0" />
  <row Id="5448" PostTypeId="2" ParentId="5444" CreationDate="2016-05-15T19:52:57.360" Score="1" Body="&lt;p&gt;I'm not sure it's possible to disable plank, but if you install Elementary Tweaks you can move plank to the left or right side of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually in 0.4 loki you don't even need Elemenetary Tweaks: you can ctrl + click on Plank and set its position in  the &lt;em&gt;Preferences&lt;/em&gt; dialog.&lt;/p&gt;&#xA;" OwnerUserId="5046" LastEditorUserId="578" LastEditDate="2016-12-29T14:47:50.203" LastActivityDate="2016-12-29T14:47:50.203" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5453" PostTypeId="1" CreationDate="2016-05-16T14:40:27.520" Score="2" ViewCount="1071" Body="&lt;p&gt;I installed &lt;code&gt;pulseaudio-equlizer&lt;/code&gt; to increase the quality of sound in my laptop. But after installing it, when playing videos in &lt;code&gt;vlc player&lt;/code&gt; sound volume got increased and got decreased from time to time automatically, just like manually doing it. I thought that may be due to the newly installed &lt;code&gt;pulseaudio&lt;/code&gt; so I uninstall it through &lt;code&gt;apt-get remove --purge pulseaudio&#xA;&lt;/code&gt; found on &lt;a href=&quot;https://askubuntu.com/questions/489609/how-can-i-cleanly-remove-pulseaudio-in-ubuntu-14-04&quot;&gt;here&lt;/a&gt; after that when I restart my lap, sound icon is not shown in the top right corner and &lt;code&gt;sound device&lt;/code&gt; is not shown in the &lt;code&gt;sounds&lt;/code&gt; in the &lt;code&gt;settings&lt;/code&gt;. Please help me to fix this error, as I can't reinstall the &lt;code&gt;OS&lt;/code&gt; again. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="3955" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-10-15T11:38:11.240" Title="sound device is not shown after purging pulseaudio" Tags="|sound|vlc|indicator-sound|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5455" PostTypeId="2" ParentId="2443" CreationDate="2016-05-16T15:31:25.450" Score="2" Body="&lt;p&gt;I had the same problem and I did this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press CTRL+ALT+F1 to get to a prompt, and login.&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get install ecryptfs-utils&lt;/li&gt;&#xA;&lt;li&gt;sudo reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If this does not work, try to create another user account from the prompt.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo useradd new-admin-username -s /bin/bash -g sudo -m&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;-s sets the user login shell&lt;br /&gt;&#xA;-m makes home directory for the new user&lt;br /&gt;&#xA;-g give the new user admin privileges&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo passwd new-admin-username &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;also on elementary Os if you have a bootable usb you can go to recovery boot and enter to root and next add an user and you can login without problems..&lt;/p&gt;&#xA;" OwnerUserId="5075" LastEditorUserId="-1" LastEditDate="2021-06-09T20:22:42.060" LastActivityDate="2021-06-09T20:22:42.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5457" PostTypeId="1" CreationDate="2016-05-16T16:48:06.943" Score="2" ViewCount="604" Body="&lt;p&gt;Geary 0.11 is out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.webupd8.org/2016/05/new-version-of-linux-email-client-geary.html&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2016/05/new-version-of-linux-email-client-geary.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add the PPA of the release, but in Elementary, Geary seems to be pinned to the OS (in Elementary specific patches repo.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to install that version in Freya ?&lt;/p&gt;&#xA;" OwnerUserId="5013" LastActivityDate="2016-05-19T14:01:29.877" Title="How to get new Geary 0.11 ? Will Freya get the update?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5458" PostTypeId="1" CreationDate="2016-05-17T02:49:28.840" Score="1" ViewCount="276" Body="&lt;p&gt;So there's no way that my elementary will connect to wifi, i've seen similar issues saying that they had terrible Internet speed but i can't even connect and there's about 3 solutions for the problems with this driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Checking if it is hardware or software blocked, mine is neither&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Checking if power save mode is on, mine is not&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Creating a .conf file in etc/modprobe.d/ath9k.conf with a line saying options ath9k nohwcrypt=1 ; also didn't work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't get an ethernet cable connection so i can't update my kernel, also if you need me to post the output of a command i would appreciate if you told me exactly what part should i look for since i can't paste anything, i'm writing this on my cellphone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I apologize for any mistakes in my english since it is not my mother language&lt;/p&gt;&#xA;" OwnerUserId="5078" LastActivityDate="2016-09-24T20:42:50.530" Title="Qualcomm Atheros AR9485 problems" Tags="|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5459" PostTypeId="1" AcceptedAnswerId="5460" CreationDate="2016-05-17T07:37:31.700" Score="2" ViewCount="1357" Body="&lt;p&gt;Is there any DConf/Gsettings etc. interface for changing the wallpaper through the command line?&lt;/p&gt;&#xA;" OwnerUserId="5079" LastActivityDate="2017-02-24T21:00:06.320" Title="How do I change the wallpaper through the command line?" Tags="|desktop|command-line|pantheon|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5460" PostTypeId="2" ParentId="5459" CreationDate="2016-05-17T12:14:27.073" Score="3" Body="&lt;p&gt;Thanks to the &lt;a href=&quot;https://code.launchpad.net/~donadigo/switchboard-plug-pantheon-shell/set-wallpaper-contract-1191929&quot; rel=&quot;nofollow noreferrer&quot;&gt;Set Wallpaper Contract&lt;/a&gt; there already is a convenient way to set a new wallpaper: &lt;code&gt;set-wallpaper&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set-wallpaper ~/Downloads/coolpicture.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;set-wallpaper some-name.png&lt;/code&gt; will set as wallpaper the file &lt;code&gt;~/some-name.png&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is no such file at that location, it will create a black desktop: for example a command like &lt;code&gt;set-wallpaper x&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorDisplayName="user170" LastEditDate="2017-02-24T21:00:06.320" LastActivityDate="2017-02-24T21:00:06.320" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5461" PostTypeId="2" ParentId="5453" CreationDate="2016-05-17T15:19:35.540" Score="2" Body="&lt;p&gt;I found the solution for it.&#xA;First I removed any traces of pulseaudio and pulseaudio-equalizer by using the below command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pulseaudio pulseaudio-equalizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;p&gt;removed following directories using the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf /etc/pulse /usr/share/pulseaudio usr/share/pulseaudio-equalizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then &lt;code&gt;reboot&lt;/code&gt; the system.&#xA;Next reinstalled &lt;code&gt;pulseaudio&lt;/code&gt; using the following code&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pulseaudio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(internet connection is needed)&#xA;finally reinstalled &lt;code&gt;elementary-dekstop&lt;/code&gt; using the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;after reboot, move aside the ~/.config/pulse folder&#xA;(on a Elementary OS 'Loki' system, audio device was still missing until I did this step; immediately after I deleted the pulse folder, the default sound device reappeared as desired)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/.config/pulse &amp;amp;&amp;amp; tar -zcf pulse.tar.gz pulse &amp;amp;&amp;amp; rm -rf pulse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3955" LastEditorUserId="26" LastEditDate="2017-10-15T11:38:11.240" LastActivityDate="2017-10-15T11:38:11.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5462" PostTypeId="2" ParentId="608" CreationDate="2016-05-17T16:47:24.850" Score="2" Body="&lt;p&gt;this is what worked for me.  Now, I can set the screen brightness with my function keys, or the gui, and when I plug in the AC adapter the brightness remains constant.  The computer also starts up with whatever brightness level I had set it to, prior to shutting it down. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal, run (replace gedit with whatever you're using for your text editor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gksudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look for the line that looks like this (there may be other things within the quotation marks, but what you are looking for, specifically, is the 'acpi_osi='):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX=&quot;acpi_osi=&lt;/code&gt; (there may or may not be other things written here, but don't worry about them)&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the &quot;=&quot; simply type: &lt;code&gt;linux&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, now the line should look something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX=&quot;acpi_osi=linux&lt;/code&gt; (again, there may be other stuff here)&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;restart your computer and your problem should be solved.&lt;/p&gt;&#xA;" OwnerUserId="5085" LastEditorUserId="242" LastEditDate="2016-05-17T17:15:10.137" LastActivityDate="2016-05-17T17:15:10.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5463" PostTypeId="2" ParentId="5457" CreationDate="2016-05-17T17:44:51.493" Score="3" Body="&lt;p&gt;There isn't much info on this yet but I saw where Geary was being downloaded from when I removed and tried updating from the new PPA. Decided to try this and it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to install the latest version on Elementary by:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Selecting 'Software Sources' in Software Center under the 'Edit' tab&lt;/li&gt;&#xA;&lt;li&gt;Navigating to the 'Other Sources' tab&lt;/li&gt;&#xA;&lt;li&gt;Deselecting the 4 sources that began with       &lt;a href=&quot;http://ppa.launchpad.net/elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os&lt;/a&gt; (Probably only need to do the two that say 'patches', like you alluded to)&lt;/li&gt;&#xA;&lt;li&gt;Running &lt;code&gt;apt-get remove geary&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Following normal install instructions (ie: adding PPA and installing)&lt;/li&gt;&#xA;&lt;li&gt;Went back in Software Center and selected those sources again&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I won't be suprised if it does something funny when it comes time to update but maybe Freya will be aware of the new Geary by then.&#xA;It has one bug on my MacBook Air install but otherwise looks good. Geary was crashing all the time for me so I hope this improves its stability because it's certainly the nicest email cli around that mostly works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might be a cleaner solution as well: &lt;a href=&quot;https://askubuntu.com/a/57749&quot;&gt;https://askubuntu.com/a/57749&lt;/a&gt;&#xA;It allows you to set -t flag on apt-get install which specifies a release.&lt;/p&gt;&#xA;" OwnerUserId="5086" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-17T17:44:51.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5464" PostTypeId="2" ParentId="5436" CreationDate="2016-05-17T22:51:58.633" Score="2" Body="&lt;p&gt;It is recommended that at 4GB of RAM and above, users use the 64-bit version, assuming they have a 64-bit capable CPU. You may, however, see a slight performance improvement by using the 32-bit version with PAE (included by default), as it uses slightly less memory.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-05-17T22:51:58.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5465" PostTypeId="1" CreationDate="2016-05-17T23:04:30.453" Score="2" ViewCount="189" Body="&lt;p&gt;I can see the option to reduce the brightness of the screen on my laptop but not on my desktop. Is there a way to adjust this on my pc?&lt;/p&gt;&#xA;" OwnerUserId="5090" LastEditorUserId="124" LastEditDate="2016-08-17T17:34:58.463" LastActivityDate="2018-06-03T04:25:12.020" Title="How to reduce the brightness of a desktop pc?" Tags="|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5466" PostTypeId="2" ParentId="4090" CreationDate="2016-05-18T02:30:00.847" Score="1" Body="&lt;p&gt;As an alternative, I've been able to have a correct keyboard layout option switcher by removing &lt;code&gt;pantheon-greeter&lt;/code&gt; and installing &lt;code&gt;unity-greeter&lt;/code&gt;&#xA;Not as pretty, but a workaround good enough if you really need to be able to switch between keyboard layouts at the login screen ...&lt;/p&gt;&#xA;" OwnerUserId="5093" LastActivityDate="2016-05-18T02:30:00.847" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5467" PostTypeId="2" ParentId="5435" CreationDate="2016-05-18T03:55:49.980" Score="1" Body="&lt;p&gt;Try right clicking files on Plank and clicking &lt;strong&gt;New Window As Administrator&lt;/strong&gt;. Then enter your password and press enter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to access the MAC drive now&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-18T03:55:49.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5468" PostTypeId="2" ParentId="5465" CreationDate="2016-05-18T05:05:12.873" Score="2" Body="&lt;p&gt;Install graphics driver&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Settings &gt; Additional drivers&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Option to change brightness should be in settings:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Settings &gt; Brightness &amp;amp; Lock&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Do you use latest version of elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="4943" LastEditorUserId="26" LastEditDate="2016-09-24T20:43:21.407" LastActivityDate="2016-09-24T20:43:21.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5469" PostTypeId="2" ParentId="5408" CreationDate="2016-05-18T09:12:51.893" Score="1" Body="&lt;p&gt;Try install latest Linux kernel with: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:kernel-ppa/ppa&#xA;sudo apt update &#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or latest elementary OS, because with this chip everything should work&lt;/p&gt;&#xA;" OwnerUserId="4943" LastEditorUserId="26" LastEditDate="2016-09-24T20:42:26.500" LastActivityDate="2016-09-24T20:42:26.500" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5470" PostTypeId="2" ParentId="5384" CreationDate="2016-05-18T14:41:06.017" Score="2" Body="&lt;p&gt;I reuse the answer &lt;a href=&quot;https://askubuntu.com/a/134469/79547&quot;&gt;from here&lt;/a&gt;, with small changes&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Via GUI&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;a href=&quot;http://apt.ubuntu.com/p/dconf-tools&quot; rel=&quot;nofollow noreferrer&quot;&gt;dconf-editor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;From the command line, run the command &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Or click here to install from the Ubuntu Software Center: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://apps.ubuntu.com/cat/applications/dconf-editor&quot; rel=&quot;nofollow noreferrer&quot;&gt;Install via the software center http://hostmar.co/software-banner&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; and type &lt;code&gt;dconf-editor&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;code&gt;org&lt;/code&gt; -&gt; &lt;code&gt;gnome&lt;/code&gt; -&gt; &lt;code&gt;gnome-screenshot&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;At &quot;auto-save-directory&quot; type the desired directory in the following format: &lt;code&gt;file:///home/user/Desktop/&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/PqXQL.png&quot; alt=&quot;name: auto-save-directory, value: file:///full/path/&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A tip for anyone who is using the configuration editor in unity: click on the arrow to the left the &lt;code&gt;org&lt;/code&gt; text to expand it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;Via Terminal&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Simply run this command, replacing the path with your preferred directory.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.gnome-screenshot auto-save-directory &quot;file:///home/$USER/Downloads/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4551" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-18T14:41:06.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5471" PostTypeId="2" ParentId="2396" CreationDate="2016-05-18T15:04:58.737" Score="0" Body="&lt;p&gt;You need to create a &lt;code&gt;Launcher&lt;/code&gt; first (.desktop file). You can create that manually or use &lt;a href=&quot;https://bluesabre.org/projects/menulibre/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MenuLibre&lt;/a&gt; for that.&lt;/p&gt;&#xA;&lt;p&gt;Since your command is in your home directory, your command needs the whole path: &lt;code&gt;/home/youruser/Isoplex&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once created you can now drag that &lt;code&gt;Launcher&lt;/code&gt; to your Plank.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZEdgQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZEdgQ.png&quot; alt=&quot;MenuLibre Screenshot&quot; /&gt;&lt;/a&gt;&lt;br /&gt;&#xA;&lt;sub&gt;(source: &lt;a href=&quot;https://smdavis.us/wp-content/uploads/2012/07/menulibre_2014_07.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;smdavis.us&lt;/a&gt;)&lt;/sub&gt;&lt;/p&gt;&#xA;" OwnerUserId="4551" LastEditorUserId="8517" LastEditDate="2022-12-25T04:08:56.590" LastActivityDate="2022-12-25T04:08:56.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5472" PostTypeId="1" CreationDate="2016-05-19T06:29:56.533" Score="1" ViewCount="1343" Body="&lt;p&gt;Is their any one who can help me to install ROR on elementary OS? &lt;br&gt;&#xA;I am new on elementary OS. I want to install ruby on rails on my elementary OS.&#xA;can anyone please tell me how can i install ruby on rails on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank You&lt;/p&gt;&#xA;" OwnerUserId="5097" LastEditorUserId="16827" LastEditDate="2019-05-14T14:24:00.823" LastActivityDate="2019-05-14T14:24:00.823" Title="How to install ruby on rails on elementary OS?" Tags="|software-installation|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="5473" PostTypeId="1" AcceptedAnswerId="9488" CreationDate="2016-05-19T08:20:23.960" Score="1" ViewCount="597" Body="&lt;p&gt;Is there a way to have a pop-up or other window prompting to chose options upon insertion of a CD or DVD (like 'Play with VLC' or 'Rip CD with Asunder')?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-12-01T14:45:32.253" LastActivityDate="2016-12-05T17:30:55.040" Title="Removable media options upon insertion in Loki" Tags="|release-loki|dvd|audio-cd|multimedia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5474" PostTypeId="2" ParentId="5472" CreationDate="2016-05-19T11:12:20.913" Score="2" Body="&lt;p&gt;Run the following commands to install Ruby on rails&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git-core curl zlib1g-dev build-essential libssl-dev libreadline-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt1-dev libcurl4-openssl-dev python-software-properties libffi-dev&#xA;cd&#xA;git clone https://github.com/rbenv/rbenv.git ~/.rbenv&#xA;echo 'export PATH=&quot;$HOME/.rbenv/bin:$PATH&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;echo 'eval &quot;$(rbenv init -)&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;exec $SHELL&#xA;&#xA;git clone https://github.com/rbenv/ruby-build.git ~/.rbenv/plugins/ruby-build&#xA;echo 'export PATH=&quot;$HOME/.rbenv/plugins/ruby-build/bin:$PATH&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;exec $SHELL&#xA;&#xA;git clone https://github.com/rbenv/rbenv-gem-rehash.git ~/.rbenv/plugins/rbenv-gem-rehash&#xA;&#xA;rbenv install 2.3.0&#xA;rbenv global 2.3.0&#xA;ruby -v&#xA;gem install bundler&#xA;curl -sL https://deb.nodesource.com/setup_4.x | sudo -E bash -&#xA;sudo apt install -y nodejs&#xA;gem install rails -v 4.2.6&#xA;rbenv rehash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;https://gorails.com/setup/ubuntu/14.04&quot; rel=&quot;nofollow&quot;&gt;https://gorails.com/setup/ubuntu/14.04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-09-24T20:43:37.637" LastActivityDate="2016-09-24T20:43:37.637" CommentCount="22" ContentLicense="CC BY-SA 3.0" />
  <row Id="5475" PostTypeId="5" CreationDate="2016-05-19T11:14:33.007" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A notification is a message, email, icon or another symbol that&#xA;  appears when an application wants you to pay attention. An application&#xA;  can use notifications to let you know things that are happening when&#xA;  you're not using it, so you don't miss important information or&#xA;  activity that's taking place in the app.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="-1" LastEditorUserId="16827" LastEditDate="2019-04-30T14:11:55.517" LastActivityDate="2019-04-30T14:11:55.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5476" PostTypeId="4" CreationDate="2016-05-19T11:14:33.007" Score="0" Body="Questions relating to notifications on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:20:55.157" LastActivityDate="2016-05-24T22:20:55.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5477" PostTypeId="5" CreationDate="2016-05-19T11:16:13.070" Score="0" Body="&lt;p&gt;Pantheon is the desktop environment used in elementary OS and can be installed on other Linux distros&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:22.283" LastActivityDate="2016-05-24T22:21:22.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5478" PostTypeId="4" CreationDate="2016-05-19T11:16:13.070" Score="0" Body="Questions relating to Pantheon, elementary OS's desktop shell." OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-05-24T22:21:14.440" LastActivityDate="2016-05-24T22:21:14.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5479" PostTypeId="5" CreationDate="2016-05-19T11:17:31.273" Score="0" Body="&lt;p&gt;Screen resolution is the size or density of the visual content on a computer display. It can be changed from the OS Settings (&lt;a href=&quot;/questions/tagged/switchboard&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;switchboard&amp;#39;&quot; rel=&quot;tag&quot;&gt;switchboard&lt;/a&gt;). Use the &lt;a href=&quot;/questions/tagged/display&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;display&amp;#39;&quot; rel=&quot;tag&quot;&gt;display&lt;/a&gt; tag for other computer screen issues.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-10-19T00:23:15.530" LastActivityDate="2016-10-19T00:23:15.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5480" PostTypeId="4" CreationDate="2016-05-19T11:17:31.273" Score="0" Body="the number and ratio of pixels (visual data) shown on a computer display (e.g., 1024 x 768), also depicted as an aspect ratio or in pixel density (pixels per inch or cm). Use the &quot;Display&quot; tag for other computer screen issues." OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-10-19T00:23:08.913" LastActivityDate="2016-10-19T00:23:08.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5481" PostTypeId="5" CreationDate="2016-05-19T11:21:52.243" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-19T11:21:52.243" LastActivityDate="2016-05-19T11:21:52.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5482" PostTypeId="4" CreationDate="2016-05-19T11:21:52.243" Score="0" Body="For questions about the language in elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:56:11.983" LastActivityDate="2016-05-24T22:56:11.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5483" PostTypeId="5" CreationDate="2016-05-19T11:22:23.400" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-19T11:22:23.400" LastActivityDate="2016-05-19T11:22:23.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5484" PostTypeId="4" CreationDate="2016-05-19T11:22:23.400" Score="0" Body="For questions about software development and related tools on elementary OS" OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:07.523" LastActivityDate="2016-10-09T00:08:07.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5485" PostTypeId="5" CreationDate="2016-05-19T11:23:11.837" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-19T11:23:11.837" LastActivityDate="2016-05-19T11:23:11.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5486" PostTypeId="4" CreationDate="2016-05-19T11:23:11.837" Score="0" Body="For questions about sound and audio issues on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:17.143" LastActivityDate="2016-05-24T22:21:17.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5487" PostTypeId="1" CreationDate="2016-05-19T12:42:22.593" Score="3" ViewCount="474" Body="&lt;p&gt;Got elementary OS installed at the local &lt;strong&gt;Neighbors House&lt;/strong&gt; after shifting the original GPU, RAM and finally a defective motherboard. Yeah ':-p Will hopefully serve as a demo box for people around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To achieve that I need to customize the Guest session, particularly the language, but am stuck half-way.&#xA;Your ideas are welcome!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: screenshot of the &lt;em&gt;partial&lt;/em&gt; (very incomplete) result with the settings below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VqLSL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://framapic.org/GnN4ifr4uXM4/aksmanXBnDkN.png&quot; alt=&quot;Eos Guest account partial localization&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/default/locale&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=fr_FR.UTF-8&#xA;LANGUAGE=fr_FR.UTF-8:en_US&#xA;LC_MESSAGES=POSIX&#xA;LC_PAPER=A4LC_TIME=fr_FR.UTF-8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;$ locale&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=fr_FR.UTF-8&#xA;LANGUAGE=fr_FR&#xA;LC_CTYPE=&quot;fr_FR.UTF-8&quot;&#xA;LC_NUMERIC=fr_FR.UTF-8&#xA;LC_TIME=fr_FR.UTF-8&#xA;LC_COLLATE=&quot;fr_FR.UTF-8&quot;&#xA;LC_MONETARY=fr_FR.UTF-8&#xA;LC_MESSAGES=POSIX&#xA;LC_PAPER=fr_FR.UTF-8&#xA;LC_NAME=fr_FR.UTF-8&#xA;LC_ADDRESS=fr_FR.UTF-8&#xA;LC_TELEPHONE=fr_FR.UTF-8&#xA;LC_MEASUREMENT=fr_FR.UTF-8&#xA;LC_IDENTIFICATION=fr_FR.UTF-8&#xA;LC_ALL=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;$ dpkg --list|grep language&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ii  language-pack-en                           1:14.04+20150219   all      translation updates for language English&#xA;ii  language-pack-en-base                      1:14.04+20150219   all      translations for language English&#xA;ii  language-pack-fr                           1:14.04+20140707   all      translation updates for language French&#xA;ii  language-pack-fr-base                      1:14.04+20140707   all      translations for language French&#xA;ii  language-pack-gnome-en                     1:14.04+20150219   all      GNOME translation updates for language English&#xA;ii  language-pack-gnome-en-base                1:14.04+20150219   all      GNOME translations for language English&#xA;ii  language-pack-gnome-fr                     1:14.04+20140707   all      GNOME translation updates for language French&#xA;ii  language-pack-gnome-fr-base                1:14.04+20140707   all      GNOME translations for language French&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5099" LastEditorUserId="5099" LastEditDate="2016-06-20T13:17:16.980" LastActivityDate="2016-11-25T14:42:13.173" Title="How to customize elementary OS Guest session" Tags="|language|settings|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5489" PostTypeId="1" CreationDate="2016-05-19T14:02:54.337" Score="1" ViewCount="134" Body="&lt;p&gt;I want to create a file manager context menu entry to play directory contents in a music player, namely Audacious.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already created a file &lt;code&gt;/usr/share/contractor/audacious_play_dir.contract&lt;/code&gt; like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Play in Audacious&#xA;Icon=audacious&#xA;MimeType=inode/directory&#xA;Exec=audacious %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but for some reason Audacious does not appear in the context menu, while trying the same procedure for other players it works very well; for Deadbeef:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Play in DeadBeef&#xA;Icon=deadbeef&#xA;MimeType=inode/directory&#xA;Exec=deadbeef %F &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for Exaile:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Play in Exaile Audio Player&#xA;Icon=exaile&#xA;MimeType=inode/directory&#xA;Exec=exaile %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Qmmp:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Play in Qmmp&#xA;Icon=qmmp&#xA;MimeType=inode/directory&#xA;Exec=qmmp %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and the context menu looks like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0IKaW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0IKaW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to use Audacious for this and am intrigued why it doesn't work the same way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also looked at &lt;code&gt;/usr/share/applications/mimeinfo.cache&lt;/code&gt; to see if Audacious is specified for `inode/directory/ mimetype: it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inode/directory=Thunar-folder-handler.desktop;decibel-audio-player.desktop;pantheon-files.desktop;audacious.desktop;qmmp_enqueue.desktop;qmmp_dir.desktop;baobab.desktop;pcmanfm.desktop;audacious-qt.desktop;open-pantheon-terminal-here.desktop;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;while Deadbeef is not (therefore this file is not important for the issue here)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-28T08:29:49.057" LastActivityDate="2016-11-28T08:29:49.057" Title="Contract file (file manager context menu entry) to play/add directory into Audacious player" Tags="|release-freya|pantheon-files|audio|audio-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5490" PostTypeId="2" ParentId="5447" CreationDate="2016-05-19T15:43:54.630" Score="2" Body="&lt;p&gt;I can reproduce it! Seems to be a grid view bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I don't have enough reputation to only comment. The closest bug I've found is this: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1579270&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1579270&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-Click some file or folder(double Click mode)&#xA;-Try moving between files with Arrow keys&#xA;-They will start moving from first file and not from the selected file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may improve the bug report with your observation.&lt;/p&gt;&#xA;" OwnerUserId="4551" LastActivityDate="2016-05-19T15:43:54.630" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5491" PostTypeId="1" CreationDate="2016-05-19T16:07:04.593" Score="-1" ViewCount="813" Body="&lt;p&gt;I decided to go to the Elementary, but installation issues &quot;critical error&quot;, saying &quot;failed to install grub-install dev / sda&quot; (not literally wrote). How to fix it can be.&#xA;Notebook Asus K56CB. Mount as Rufus, and UltraISO, there is no difference.&lt;/p&gt;&#xA;" OwnerUserId="5102" LastActivityDate="2016-05-21T09:33:28.113" Title="failed to install grub-install dev / sda" Tags="|grub|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-24T20:44:31.507" ContentLicense="CC BY-SA 3.0" />
  <row Id="5493" PostTypeId="2" ParentId="4294" CreationDate="2016-05-20T00:27:56.303" Score="0" Body="&lt;p&gt;Yesterday (the 19th of May, 2016) the issue suddenly disappeared after updating my PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I manually used to run this a few times a week, and it looks like the developers finally fixed the issue:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2925" LastActivityDate="2016-05-20T00:27:56.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5494" PostTypeId="1" CreationDate="2016-05-20T01:04:00.420" Score="0" ViewCount="127" Body="&lt;p&gt;Just wondering since this os mimics Apple. I know that Apple may be doing away with afp, but they haven't yet and it will works. If elementary is is based on Ubuntu, can I just use netatalk 'a instructions for Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="5104" LastEditorUserId="5104" LastEditDate="2016-05-20T01:30:34.160" LastActivityDate="2016-10-14T23:00:41.143" Title="Anyone tried getting netatalk working on elementary os?" Tags="|pantheon-files|settings|files|filesystem|samba|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5495" PostTypeId="1" CreationDate="2016-05-20T03:34:38.630" Score="-1" ViewCount="553" Body="&lt;p&gt;I recently did a fresh install of ubuntu 16.04 using the mini.iso and installing a headless CLI environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then added the elementary os daily PPA and ran:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install elementary-desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot... and I now have a fully functioning elementary OS Loki Beta [yay]&#xA;Full functioning... but network manager applet doesn't list VPN options after installing Open VPN.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for VPN I ran the sh script found here:&lt;br&gt;&#xA;&lt;a href=&quot;https://www.privateinternetaccess.com/pages/client-support/ubuntu-openvpn&quot; rel=&quot;nofollow&quot;&gt;https://www.privateinternetaccess.com/pages/client-support/ubuntu-openvpn&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which worked fine in 14.04 despite it being intended for 12.04.&#xA;The script did error at the very end with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restarting network manager..&lt;br&gt;&#xA;Error: Object 'nm' is unknown, try 'nmcli help'.&lt;br&gt;&#xA;Error: Object 'nm' is unknown, try 'nmcli help'.&lt;br&gt;&#xA;Install successful!&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked at the script... and those two lines just reference restarting the network manager [which I did manually... and it didn't fix the issue].&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's literally nothing after that in the script other than &quot;echo install complete&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, why, after a reboot... can I still not access my list of VPN connections?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any workarounds would be much appreciated.&#xA;THX&lt;/p&gt;&#xA;" OwnerUserId="5105" LastActivityDate="2016-05-20T13:41:14.087" Title="No GUI Access to VPN Connections | OpenVPN | 16.04 Loki Beta Daily PPA" Tags="|openvpn|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-09T00:32:17.327" ContentLicense="CC BY-SA 3.0" />
  <row Id="5497" PostTypeId="2" ParentId="1341" CreationDate="2016-05-20T08:41:27.187" Score="9" Body="&lt;p&gt;What worked for me:&#xA;Switch to next desktop (windows key + right arrow)&#xA;Now you can click the &quot;X&quot; to dismiss the notification&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Return to your daily business&lt;/p&gt;&#xA;" OwnerUserId="5111" LastActivityDate="2016-05-20T08:41:27.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5498" PostTypeId="1" CreationDate="2016-05-20T08:42:55.637" Score="1" ViewCount="137" Body="&lt;p&gt;I like Midori, but there is one big problem. It crashes too much:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(midori4:2): GLib-GObject-CRITICAL **: g_object_ref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_unref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_ref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_unref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_ref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_unref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_ref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_unref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_ref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;(midori4:2): GLib-GObject-CRITICAL **: g_object_unref: assertion 'object-&amp;gt;ref_count &amp;gt; 0' failed&#xA;&#xA;parent is shutting down, bye...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What can I do to fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="5109" LastEditorUserId="3757" LastEditDate="2016-05-20T11:43:19.843" LastActivityDate="2016-05-20T11:43:19.843" Title="Midori shuts down" Tags="|midori|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5499" PostTypeId="2" ParentId="5489" CreationDate="2016-05-20T10:04:47.700" Score="1" Body="&lt;p&gt;I tried this and it worked with this contractor entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Play in Audacious&#xA;Icon=audacious&#xA;Description=Play directory in Audacious Music Player&#xA;MimeType=inode/directory;&#xA;Exec=audacious %F&#xA;Gettext-Domain=audacious&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(I just copied one of the existing ones)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it also works with the one you quoted above.  It does not seem to be particularly sensitive to missing semi-colons, extra spaces etc.  The critical thing is spelling the mimetype correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even without a contract entry you should get Audacious appearing in the &quot;Open with&quot; menu (provided the audacious.desktop file includes the inode/directory mimetype).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using the latest version of Files (Loki) which is not released at the moment but I am not aware of any recent changes with regard to contracts.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorDisplayName="user170" LastEditDate="2016-05-20T10:09:42.070" LastActivityDate="2016-05-20T10:09:42.070" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5500" PostTypeId="1" AcceptedAnswerId="5505" CreationDate="2016-05-20T10:18:05.733" Score="3" ViewCount="230" Body="&lt;p&gt;In &lt;a href=&quot;https://elementaryos.stackexchange.com/a/5499/170&quot;&gt;this answer&lt;/a&gt; it is confirmed the possibility of using a development version of Files (the one that should be default in Loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I install that in Freya?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-05T09:21:07.373" Title="Is Panthon Files from Loki version installable for Freya?" Tags="|pantheon-files|release-loki|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5501" PostTypeId="1" AcceptedAnswerId="5506" CreationDate="2016-05-20T10:24:28.703" Score="0" ViewCount="137" Body="&lt;pre&gt;&lt;code&gt;The following packages were automatically installed and are no longer required:&#xA;  fonts-horai-umefont git git-man glib-networking:i386 gnome-exe-thumbnailer&#xA;  gnome-session-canberra i965-va-driver:i386 libasn1-8-heimdal:i386&#xA;  libatk-bridge2.0-0:i386 libatk1.0-0:i386 libatspi2.0-0:i386&#xA;  libcairo-gobject2:i386 libcairo2:i386 libcapi20-3 libcapi20-3:i386&#xA;  libcdr-0.0-0 libcmis-0.4-4 libcolord1:i386 liberror-perl libexif12:i386&#xA;  libftgl2 libgd3:i386 libgdk-pixbuf2.0-0:i386 libgegl-0.2-0 libgif4:i386&#xA;  libglu1-mesa:i386 libgphoto2-6:i386 libgphoto2-port10:i386&#xA;  libgraphite2-3:i386 libgsm1:i386 libgssapi3-heimdal:i386&#xA;  libgstreamer-plugins-base0.10-0:i386 libgstreamer0.10-0:i386 libgtk-3-0:i386&#xA;  libharfbuzz0b:i386 libhcrypto4-heimdal:i386 libhdb9-heimdal&#xA;  libheimbase1-heimdal:i386 libheimntlm0-heimdal:i386 libhx509-5-heimdal:i386&#xA;  libieee1284-3:i386 libindicate5 libjasper1:i386 libjson-glib-1.0-0:i386&#xA;  libkdc2-heimdal libkrb5-26-heimdal:i386 liblcms2-2:i386 libldap-2.4-2:i386&#xA;  libltdl7:i386 libmowgli2 libmpg123-0:i386 libmspub-0.0-0 libnoise-core0&#xA;  libntdb1 libodbc1:i386 libopenal1:i386 liborcus-0.6-0 libosmesa6&#xA;  libosmesa6:i386 libp11-kit-gnome-keyring:i386 libpango-1.0-0:i386&#xA;  libpangocairo-1.0-0:i386 libpangoft2-1.0-0:i386 libpcap0.8:i386&#xA;  libpixman-1-0:i386 libprojectm2 libproxy1:i386 libqxt-core0 libqxt-gui0&#xA;  librest-0.7-0:i386 libroken18-heimdal:i386 libsane:i386 libsasl2-2:i386&#xA;  libsasl2-modules:i386 libsasl2-modules-db:i386 libsdl2-2.0-0&#xA;  libsoup-gnome2.4-1:i386 libsoup2.4-1:i386 libsqlheavy0.1-0 libtimezonemap1&#xA;  libusb-1.0-0:i386 libv4l-0:i386 libv4lconvert0:i386 libva-drm1:i386&#xA;  libva-glx1 libva-x11-1:i386 libva1:i386 libvdpau1:i386 libvisio-0.0-0&#xA;  libvncclient0 libvpx1:i386 libwayland-client0:i386 libwayland-cursor0:i386&#xA;  libwind0-heimdal:i386 libwpd-0.9-9 libwpg-0.2-2 libwps-0.2-2 libx265-59&#xA;  libxcb-render0:i386 libxcb-shm0:i386 libxcomposite1:i386 libxcursor1:i386&#xA;  libxinerama1:i386 libxkbcommon0:i386 libxpm4:i386 libxrandr2:i386&#xA;  linux-headers-3.19.0-26 linux-headers-3.19.0-26-generic&#xA;  linux-image-3.19.0-26-generic linux-image-extra-3.19.0-26-generic&#xA;  linux-lts-xenial-tools-4.4.0-21 linux-tools-4.4.0-21-generic&#xA;  ocl-icd-libopencl1:i386 p11-kit-modules:i386 python-ntdb sbsigntool&#xA;  secureboot-db ttf-dejavu-core va-driver-all:i386 vdpau-va-driver:i386&#xA;  wine-gecko2.21 wine-gecko2.21:i386 wine-gecko2.34 wine-gecko2.34:i386&#xA;  wine-mono0.0.8 wine-mono4.5.4 xfonts-mathml&#xA;Use 'apt-get autoremove' to remove them.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On a couple of occasions using ubuntu-based systems a similar message with a lot of dependencies incited me to break my system.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-05-20T13:39:12.160" Title="Is it safe to remove all these packages?" Tags="|release-freya|apt|package-management|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5502" PostTypeId="2" ParentId="2444" CreationDate="2016-05-20T10:28:40.350" Score="3" Body="&lt;p&gt;Using scratch-text-editor to write a simple lua script, these are seen as text files.  When marked as &quot;executable&quot; I get the &quot;Run&quot; option, but the &quot;Open With&quot; menu offers text editors. If you do not want to run these files then I suggest you try changing the Properties to remove the &quot;execute&quot; permission. This will stop the &quot;Run&quot; option appearing.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-05-20T10:28:40.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5503" PostTypeId="1" AcceptedAnswerId="5515" CreationDate="2016-05-20T10:47:17.573" Score="1" ViewCount="101" Body="&lt;p&gt;After a regular software update, the program previously called &quot;Calculator&quot; is now called &quot;Unnamed&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the applications menu, the icon is still correct, but the program is now called unnamed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the launch panel, the icon is now the default gear icon, rather than the calculator icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clicking on any of them still opens the calculator program though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else seem this problem or know of a way to correct it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using elementary OS 0.3.2 Freya (64-bit)&lt;/p&gt;&#xA;" OwnerUserId="164" LastActivityDate="2016-05-20T14:39:39.357" Title="After update, calculator program is now called unnamed" Tags="|icons|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5504" PostTypeId="1" CreationDate="2016-05-20T12:39:35.217" Score="6" ViewCount="3572" Body="&lt;p&gt;I recently tried out &lt;a href=&quot;http://kxmylo.deviantart.com/art/Xgtk-theme-gtk-3-14-3-12-465195148&quot; rel=&quot;noreferrer&quot;&gt;this_theme&lt;/a&gt;. I tried changing the details in &lt;code&gt;.panel&lt;/code&gt; in the apps.css of gtk-3 folder but to no avail&lt;/p&gt;&#xA;" OwnerUserId="5113" LastEditorUserId="26" LastEditDate="2016-09-24T20:45:39.840" LastActivityDate="2017-07-22T19:40:24.647" Title="How do I change the background color and font color of wingpanel XGTK theme?" Tags="|themes|gtk|settings|" AnswerCount="2" CommentCount="1" ClosedDate="2017-10-08T17:25:14.957" ContentLicense="CC BY-SA 3.0" />
  <row Id="5505" PostTypeId="2" ParentId="5500" CreationDate="2016-05-20T13:36:17.037" Score="1" Body="&lt;p&gt;It is possible to install the latest Pantheon Files if you add the daily PPA , upgrade Pantheon Files and remove the daily PPA. During the process do not attempt to update elementary OS since it would break&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;WARNING : You are installing development packages so they may be&#xA;  unstable and break your system.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h2&gt;To install run the following commands&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;sudo apt-get install pantheon-files&#xA;sudo add-apt-repository --remove ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;To downgrade to the old version&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove pantheon-files&#xA;sudo apt-get remove libpantheon-files-core0&#xA;sudo apt-get install pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Screenshot&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kTJ8D.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kTJ8D.png&quot; alt=&quot;Pantheon Files&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see the thumbnails aren't working so I downgraded to the old version.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;UPDATE : I have tested it on my laptop and it works.&lt;/h3&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-21T02:49:52.720" LastActivityDate="2016-05-21T02:49:52.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5506" PostTypeId="2" ParentId="5501" CreationDate="2016-05-20T13:39:12.160" Score="1" Body="&lt;p&gt;What did you do last?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This can happen when you remove a 32-bit package on a 64-bit system.After that the system does not need these libraries and will add them to &lt;strong&gt;autoremove&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it is that then safely remove (but create a system snapshot before so you can restore if anything breaks)&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-20T13:39:12.160" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5507" PostTypeId="2" ParentId="5495" CreationDate="2016-05-20T13:41:14.087" Score="1" Body="&lt;p&gt;You are installing beta software so expect these problems. You should report them on LaunchPad instead of asking them here and they might fix it&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-20T13:41:14.087" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5508" PostTypeId="2" ParentId="1912" CreationDate="2016-05-20T14:26:53.893" Score="1" Body="&lt;p&gt;Run the following commands to purge Pantheon files and then install it again.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pantheon-files&#xA;sudo apt install pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-09-18T20:19:22.190" LastActivityDate="2016-09-18T20:19:22.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5509" PostTypeId="5" CreationDate="2016-05-20T14:29:38.833" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-20T14:29:38.833" LastActivityDate="2016-05-20T14:29:38.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5510" PostTypeId="4" CreationDate="2016-05-20T14:29:38.833" Score="0" Body="Questions about issues shutting down elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:56:25.987" LastActivityDate="2016-05-24T22:56:25.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5511" PostTypeId="5" CreationDate="2016-05-20T14:30:53.757" Score="0" Body="&lt;p&gt;Power is electricity and can be used to power many devices such as laptops, PCs, TVs, lights and more.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-05-24T22:21:35.753" LastActivityDate="2016-05-24T22:21:35.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5512" PostTypeId="4" CreationDate="2016-05-20T14:30:53.757" Score="0" Body="Questions about power consumption on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:47.897" LastActivityDate="2016-05-24T22:21:47.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5513" PostTypeId="5" CreationDate="2016-05-20T14:33:10.883" Score="0" Body="&lt;p&gt;UI is user interface which is the way a user interacts with a program or operating system.The user interface of elementary OS and other Linux distros is the desktop environment and the running programs. The UI can be easily changed in Linux using GTK themes and can be changed in Windows using visual styles (requires modifying system files).&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:56:19.627" LastActivityDate="2016-05-24T22:56:19.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5514" PostTypeId="4" CreationDate="2016-05-20T14:33:10.883" Score="0" Body="Questions about the user interface on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:56:16.657" LastActivityDate="2016-05-24T22:56:16.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5515" PostTypeId="2" ParentId="5503" CreationDate="2016-05-20T14:39:39.357" Score="3" Body="&lt;p&gt;Run the following command to open the calculator entry in Scratch &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /usr/share/applications/pantheon-calculator.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change the text after line that starts with &lt;strong&gt;Name=&lt;/strong&gt; (it should currently be unnamed or something , if the line isn't there add it) to &lt;strong&gt;Calculator&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or replace the contents of the file with (from my laptop)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=0.1&#xA;Name=Calculator&#xA;Comment=Calculate in an elementary way.&#xA;Exec=pantheon-calculator %U&#xA;Icon=accessories-calculator&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GTK;Utility;Office;&#xA;X-GNOME-Gettext-Domain=pantheon-calculator&#xA;&#xA;X-Ayatana-Desktop-Shortcuts=AboutDialog&#xA;&#xA;[AboutDialog Shortcut Group]&#xA;Name=About Calculator&#xA;Exec=pantheon-calculator --about&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-20T14:39:39.357" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5516" PostTypeId="2" ParentId="5097" CreationDate="2016-05-21T02:10:05.923" Score="0" Body="&lt;p&gt;Finally I found the solution,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have manually edited the FSTAB file (etc/fstab). FSTAB contains all the details regarding the mount-points including auto-mount drivers in the boot-up.&#xA;so delete the line corresponding to the missing disk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here is my FSTAB file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    # /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda5 during installation&#xA;UUID=09642702-1d8e-41b8-897f-98079b8609e4 /               ext4    errors=remount-ro 0       1&#xA;# /home was on /dev/sda7 during installation&#xA;UUID=7554c61b-b8c9-45af-b5df-199670167a04 /home           ext4    defaults        0       2&#xA;# swap was on /dev/sda6 during installation&#xA;UUID=a54e0244-c77d-4672-9df9-2840924e0c94 none            swap    sw              0       0&#xA;/dev/disk/by-uuid/50FEFBC9FEFBA4FE /mnt/50FEFBC9FEFBA4FE auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Windows%2010 0 0&#xA;/dev/disk/by-uuid/3C7404F67404B4A5 /mnt/3C7404F67404B4A5 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Data 0 0&#xA;/dev/disk/by-uuid/01D1953299EF8656 /mnt/01D1953299EF8656 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Windows 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in my case i have deleted &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/dev/disk/by-uuid/50FEFBC9FEFBA4FE /mnt/50FEFBC9FEFBA4FE auto&#xA;  nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth,x-gvfs-name=Windows%2010&#xA;  0 0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;hope this will help to someone&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers !&lt;/p&gt;&#xA;" OwnerUserId="3505" LastActivityDate="2016-05-21T02:10:05.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5517" PostTypeId="5" CreationDate="2016-05-21T02:24:19.980" Score="0" Body="&lt;p&gt;Indicators are the small icons on wingpanel which can interact and show data&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:27.377" LastActivityDate="2016-05-24T22:21:27.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5518" PostTypeId="4" CreationDate="2016-05-21T02:24:19.980" Score="0" Body="Questions about the indicators (battery, time, etc) on elementary OS." OwnerUserId="3757" LastEditorUserId="26" LastEditDate="2016-05-24T22:21:45.240" LastActivityDate="2016-05-24T22:21:45.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5519" PostTypeId="5" CreationDate="2016-05-21T02:26:38.070" Score="0" Body="&lt;p&gt;Networking computers is a way to connect them each other to do things like host servers and ping&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:24.817" LastActivityDate="2016-05-24T22:21:24.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5520" PostTypeId="4" CreationDate="2016-05-21T02:26:38.070" Score="0" Body="Questions about networking on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:05.627" LastActivityDate="2016-05-24T22:21:05.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5521" PostTypeId="5" CreationDate="2016-05-21T02:27:52.843" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-21T02:27:52.843" LastActivityDate="2016-05-21T02:27:52.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5522" PostTypeId="4" CreationDate="2016-05-21T02:27:52.843" Score="0" Body="Questions about the battery life on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:00.627" LastActivityDate="2016-05-24T22:21:00.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5523" PostTypeId="5" CreationDate="2016-05-21T02:28:35.423" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-05-21T02:28:35.423" LastActivityDate="2016-05-21T02:28:35.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5524" PostTypeId="4" CreationDate="2016-05-21T02:28:35.423" Score="0" Body="Questions about the videos application on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-05-24T22:21:03.313" LastActivityDate="2016-05-24T22:21:03.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5525" PostTypeId="2" ParentId="5399" CreationDate="2016-05-21T05:52:07.580" Score="2" Body="&lt;p&gt;Unfortunately there is no setting in elementary OS to adjust this. There is a bug over there at &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-mouse-touchpad/+bug/1213473&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;. A possible solution could be &lt;a href=&quot;http://www.webupd8.org/2015/12/how-to-change-mouse-scroll-wheel-speed.html&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2015/12/how-to-change-mouse-scroll-wheel-speed.html&lt;/a&gt; (I have not tried it).&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2016-05-21T05:52:07.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5526" PostTypeId="1" CreationDate="2016-05-21T07:54:58.537" Score="1" ViewCount="153" Body="&lt;p&gt;Nice OS, gang :-)  Really enjoying it. Running 64-bit Freya, AMD II X2 Regor, Radeon Linux graphics.  If possible, could anyone please take a look at this pic of my two screen desktop:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(broken image removed)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice on the left screen that Firefox, Terminal and Nemo (open in that order from back to front) all have that infuriating narrow, slim scroll/slider-bar.        On the right screen, notice that Chrome, Geany and LibreOffice have the fat scroll/slider bars.  I am fairly proficient navigating my way around Linux (6-7 yr user now), as I had already modified the settings in /usr/share/themes/elementary/gtk-2.0/gtkrc and /usr/share/themes/elementary/gtk-3.0/gtk-widgets.css, respectively, to eliminate the narrow scroll/slider bars.    As you can see, on some programs the changes sticks and worked, on others it didn't.  Weirdly, this does not seem to be a GTK-2 vs GTK-3 dependency problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other 64-bit Linux OS-es I run (&lt;em&gt;Debian-Jessie, Ubuntu Trusty, MX-15, Peppermint, and many versions of PuppyLinux&lt;/em&gt;), whenever I edit the above files (gtkrc and gtk-widgets.css), all programs then behave and the scroll/slider-bars are properly reflected. But, for some reason, in ElementaryOS Freya, no matter what I do and/or change in the above respective &quot;Themes&quot; files, still some things (programs) are reflected with those razor thin scroll/slider bars that are impossible to quickly grab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could anyone please point me how to remedy this? Please note I do have ElementaryOS Tweaks also installed, and it makes no difference with the aforementioned problem. Some programs still open with the razor scroll/slider-bar even after changing scrollbar width inside Tweaks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help and/or pointers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. After I get this solved, I only have one question left, a question that seems again related to the ElementaryOS's window manager and why it insists on opening many programs up in full screen when you first launch them from either dock on either screen.    Mainly it is a concern on Screen 1, as continually opening up a program in as large a screen as possible renders my Screen 1 top line Conky (HD, RAM &amp;amp; CPU monitor in the same line as Freya's top taskbar) unviewable (see pic above), whereby where I have to click the program's upper right minimize button to bring that program back to a normal size that I want. The window manager seems to remember my preference for some programs opening size and yet forget many others. How in heck does Freya 64-bit differentiate between not remembering &amp;amp; opening some programs to the max and yet remember the opening size for others (and, pleased note, this is NOT a Chrome specific issue) and opening them without taking up the whole desktop space?&lt;/p&gt;&#xA;" OwnerUserId="5119" LastEditorUserId="8517" LastEditDate="2019-02-20T01:55:57.553" LastActivityDate="2019-02-20T01:55:57.553" Title="Programs scroll/slider-bar inconsistency in Freya" Tags="|system|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5527" PostTypeId="2" ParentId="5491" CreationDate="2016-05-21T09:33:28.113" Score="1" Body="&lt;p&gt;Try connecting to the internet when installing elementary OS. This happened to me and connecting to the internet solved the problem.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-21T09:33:28.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5528" PostTypeId="2" ParentId="5487" CreationDate="2016-05-21T09:39:25.517" Score="1" Body="&lt;p&gt;Go to &lt;strong&gt;System Settings&lt;/strong&gt; &gt; &lt;strong&gt;Language and Region&lt;/strong&gt;. Click unblock and select your language and click &lt;strong&gt;Set Language&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-21T09:39:25.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5529" PostTypeId="1" CreationDate="2016-05-21T09:54:31.560" Score="4" ViewCount="2727" Body="&lt;p&gt;In some distros there is a hotkey that opens a dialog box to run a terminal command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does this exist in elementary OS, and if so what's the hotkey? If not, how can I add a custom hotkey?&lt;/p&gt;&#xA;" OwnerUserId="3286" LastEditorUserId="229" LastEditDate="2016-05-22T06:25:22.823" LastActivityDate="2017-01-25T10:19:59.583" Title="What's the hotkey to run a command?" Tags="|keyboard-shortcuts|command-line|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5530" PostTypeId="2" ParentId="5529" CreationDate="2016-05-21T10:12:21.083" Score="3" Body="&lt;p&gt;Slingshot is also &lt;strong&gt;that&lt;/strong&gt;: a dialog box to run a command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt; , type the command and press &lt;kbd&gt;ENTER&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another shortcut is &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HQeC2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HQeC2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorDisplayName="user170" LastEditDate="2017-01-25T10:19:59.583" LastActivityDate="2017-01-25T10:19:59.583" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5531" PostTypeId="1" CreationDate="2016-05-21T10:31:39.430" Score="1" ViewCount="10040" Body="&lt;p&gt;I tried installing &lt;strong&gt;Tor&lt;/strong&gt; from the software center and it does not open when I click it and hangs when I run it from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried download the 64-bit ZIP , extracting and running it but it says &lt;strong&gt;Tor unexpectedly exited&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2020-01-02T13:11:27.193" Title="How to install Tor browser on elementary OS" Tags="|release-freya|tor|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5532" PostTypeId="2" ParentId="5529" CreationDate="2016-05-21T10:34:20.707" Score="1" Body="&lt;p&gt;Press &lt;kbd&gt;Windows&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; or &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; to open a terminal. Then type the command and press &lt;kbd&gt;ENTER&lt;/kbd&gt; to run it&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-21T10:34:20.707" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="5533" PostTypeId="2" ParentId="1399" CreationDate="2016-05-21T10:46:18.843" Score="0" Body="&lt;p&gt;Run the following command to uninstall the new (broken) kernel &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove linux-image-3.16.0-46-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-21T10:46:18.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5534" PostTypeId="2" ParentId="4879" CreationDate="2016-05-21T12:33:31.883" Score="0" Body="&lt;p&gt;I could install Xubuntu XFCE desktop on my elementary OS laptop using &lt;code&gt;sudo apt-get install xubuntu-desktop --no-install-recommends&lt;/code&gt;. KDE may be different but should work&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-21T12:33:31.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5535" PostTypeId="2" ParentId="5529" CreationDate="2016-05-21T15:50:15.963" Score="2" Body="&lt;p&gt;Like in elementary don't exists that option. so I create the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/bin/run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is the script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;## Zenity&#xA;command=`zenity --title &quot;Run commands&quot; --entry --text &quot;Command&quot;`&#xA;## Bash&#xA;eval $command&#xA;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;save and change the permission&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/bin/run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then set a custom shortcut in Preference &gt; keyboard &gt; Shortcut &gt; Custom&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;| command | keys      |&#xA;| run     | Super + R |&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's it! enjoy .&lt;/p&gt;&#xA;" OwnerUserId="3286" LastActivityDate="2016-05-21T15:50:15.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5536" PostTypeId="1" CreationDate="2016-05-22T04:27:21.730" Score="3" ViewCount="257" Body="&lt;p&gt;I have 2 files on my NTFS partition. One of them is 666 bytes and the other is 0 bytes. When trying to delete them it says that it does not exist&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried the &lt;code&gt;rm&lt;/code&gt; command from the terminal and it does not work&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2019-10-12T11:24:56.583" Title="How to delete file that cannot be deleted on a NTFS partition" Tags="|release-freya|dual-boot|ntfs|" AnswerCount="2" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="5537" PostTypeId="2" ParentId="5531" CreationDate="2016-05-22T05:06:02.003" Score="1" Body="&lt;p&gt;You need to get the &lt;a href=&quot;https://www.torproject.org/download/download-easy.html.en&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tor Browser Bundle&lt;/a&gt; (I'm not sure if there's a version of this in the repositories).  Extract to a convenient location, and in a terminal window execute &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd /path-to-extracted-folder/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;./start-tor-browser.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tor should start now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/316105/tor-browser-not-opening&quot;&gt;https://askubuntu.com/questions/316105/tor-browser-not-opening&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="229" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-22T05:06:02.003" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5538" PostTypeId="2" ParentId="5536" CreationDate="2016-05-22T09:07:54.310" Score="-2" Body="&lt;p&gt;Have you tried [Be careful with sudo and rm... great power great responsibility]:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;rm &quot;[full path of the file]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5105" LastEditorUserId="5132" LastEditDate="2016-05-23T10:40:16.437" LastActivityDate="2016-05-23T10:40:16.437" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5539" PostTypeId="1" AcceptedAnswerId="5543" CreationDate="2016-05-22T15:48:34.793" Score="2" ViewCount="324" Body="&lt;p&gt;I changed the my slinghot launcher key form Super+Space to just the Super key using: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu ['Super_L']&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to revert this process and change it back to Super+Space. How do I do it without using Xbindkeys as I have already tried that and failed. &lt;/p&gt;&#xA;" OwnerUserId="5124" LastActivityDate="2016-05-23T03:16:26.173" Title="Change Slingshot Launcher assigned key" Tags="|keyboard|keyboard-shortcuts|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5540" PostTypeId="1" AcceptedAnswerId="5548" CreationDate="2016-05-22T17:34:53.227" Score="1" ViewCount="130" Body="&lt;p&gt;great problem with very old desktop.&#xA;System is an old AMD Athlon XP 1900+ on a ASUS A7V600-X MoBo with NVIDIA GeForce3 Ti200.&#xA;System support CD-Boot only! No USB-Stick or HD work as boot device.&#xA;Installing Luna-i386 will open the installation window and install everything OK.&#xA;After reboot i get the Luna background picture and a black window in the middle of the screen. Nothing more.&#xA;No panel no plank. Pressing strg-alt-t i got a terminal without window and can type blind, that work.&#xA;Struggling with terminal over grub-boot i found NVIDIA driver is loaded and graphic-card is well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i stopped fighting with Luna and try Freya i386 0.3.2&#xA;CD wont boot! The shift-key wont work to get options, &quot;e&quot; wont work, nothing happens.&#xA;After a while the normal boot occurs. No message, no error, nothing.&#xA;No problem, new .iso - new cd - next try - no luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is welcome&lt;/p&gt;&#xA;" OwnerUserId="5126" LastActivityDate="2016-05-23T10:48:22.663" Title="Old Desktop will not boot Freya 0.3.2 i386 CD" Tags="|release-freya|boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5541" PostTypeId="1" AcceptedAnswerId="7294" CreationDate="2016-05-22T19:14:42.497" Score="2" ViewCount="2273" Body="&lt;p&gt;In Ubuntu and Mint, I can tweak the default inactive time before the screen turns off and my computer is locked. How do i change the default time of inactivity after which the screen gets locked?&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2016-09-25T15:57:18.447" Title="Change the default time of inactivity required to lock screen" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5542" PostTypeId="2" ParentId="5541" CreationDate="2016-05-23T00:10:05.583" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;code&gt;dconf-editor&lt;/code&gt; with &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt; in a terminal.&lt;/li&gt;&#xA;&lt;li&gt;Navigate to org/gnome/settings-daemon/plugins/power using the panel on the left.&lt;/li&gt;&#xA;&lt;li&gt;There are four entries that are of interest to you - &lt;code&gt;sleep-inactive-ac-timeout&lt;/code&gt;, &lt;code&gt;sleep-inactive-ac-type&lt;/code&gt;, &lt;code&gt;sleep-inactive-battery-timeout&lt;/code&gt;, &lt;code&gt;sleep-inactive-battery-type&lt;/code&gt;.  The &lt;code&gt;ac&lt;/code&gt; and &lt;code&gt;battery&lt;/code&gt; refers to behaviour when a laptop is plugged in or on battery (if desktop, I assume the &lt;code&gt;ac&lt;/code&gt; would apply). If you click one of the &lt;code&gt;type&lt;/code&gt; options the drop-down menu will display the possible actions - you'll want &lt;code&gt;suspend&lt;/code&gt; I think. &lt;/li&gt;&#xA;&lt;li&gt;The &lt;code&gt;timeout&lt;/code&gt; option is how long a period of inactivity (in seconds) is required before the action is carried out.  Simply click on the number there at present (probably 0), and replace with the desired value.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="229" LastEditorUserId="26" LastEditDate="2016-09-24T20:46:06.697" LastActivityDate="2016-09-24T20:46:06.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5543" PostTypeId="2" ParentId="5539" CreationDate="2016-05-23T03:16:26.173" Score="1" Body="&lt;h2&gt;Command Line Interface&lt;/h2&gt;&#xA;&lt;p&gt;You can use effectively the same method you used to change the shortcut in the first place to revert it:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &amp;quot;['&amp;lt;Super&amp;gt;space', '&amp;lt;Alt&amp;gt;F2']&amp;quot;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;reverting to the default of Super+Space or Alt+F2.&lt;/p&gt;&#xA;&lt;h2&gt;Graphical &lt;code&gt;dconf-editor&lt;/code&gt; Interface&lt;/h2&gt;&#xA;&lt;p&gt;Install &lt;code&gt;dconf-editor&lt;/code&gt; with &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; in a terminal window.  Browse using the left hand pane to &lt;code&gt;org/gnome/desktop/wm/keybindings&lt;/code&gt;.  Find &lt;code&gt;panel-main-menu&lt;/code&gt;, click it, and then &amp;quot;Set to Default&amp;quot; in the bottom pane. This will revert to the default hotkeys.&lt;/p&gt;&#xA;" OwnerUserId="229" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-05-23T03:16:26.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5544" PostTypeId="1" CreationDate="2016-05-23T08:55:08.110" Score="0" ViewCount="105" Body="&lt;p&gt;I have Geary installed on ElementaryOS Freya and I have ran all updates since 22-5-2016. I have configured Gmail and got it up and running. However, I do not like automatic downloads of pictures, especially not in the Junk folder. The Settings of Geary seem very limited and don't include this options. Is this hidden somewhere or just not possible at the moment?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="5128" LastActivityDate="2016-12-19T01:51:31.200" Title="Stop Geary automatic download images" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5547" PostTypeId="1" AcceptedAnswerId="7205" CreationDate="2016-05-23T10:27:12.957" Score="3" ViewCount="384" Body="&lt;p&gt;How is it possible to use &lt;a href=&quot;https://swift.org&quot; rel=&quot;nofollow&quot;&gt;Swift&lt;/a&gt; as programming language for elementaryOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I've seen elementaryOS is based on Ubuntu. So installing &amp;amp; using Swift should be a snap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm quite unsure in terms of using the existing libraries for elementaryOS - according to &lt;a href=&quot;https://elementary.io/de/developer&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/de/developer&lt;/a&gt; these libraries are written in Vala. As I haven't any expertise in Vala yet: Is it possible to use elementaryOS libraries from within Swift?&lt;/p&gt;&#xA;" OwnerUserId="5133" LastActivityDate="2016-09-07T21:09:49.997" Title="Using Swift together with elementary frameworks?" Tags="|development|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5548" PostTypeId="2" ParentId="5540" CreationDate="2016-05-23T10:48:22.663" Score="1" Body="&lt;p&gt;If your system does not support booting from a USB try using PLoP boot manager. First you will need to copy elementary OS to a USB using Rufus.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;How to install PLop boot manager&lt;/h1&gt;&#xA;&#xA;&lt;h3&gt;Install PLoP on a CD&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;PLoP comes as a ZIP file, which includes different files. To install PLoP on a CD, you will need either &lt;strong&gt;plpbt.iso&lt;/strong&gt; or &lt;strong&gt;plpbtnoemul.iso&lt;/strong&gt; from that ZIP file. Both disc images should work on most computers, though if in doubt &lt;strong&gt;plpbtnoemul.iso&lt;/strong&gt; should work “everywhere,” according to read me included in the ZIP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Burn &lt;strong&gt;plpbtnoemul.iso&lt;/strong&gt; or &lt;strong&gt;plpbt.iso&lt;/strong&gt; to a CD.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Booting elementary OS from PLoP&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Plug in your USB and insert your CD .Boot you computer from the CD and PLoP boot manager will load. It will look something like the following&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lEFhK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lEFhK.png&quot; alt=&quot;PLoP&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select your elementary OS USB and press &lt;kbd&gt;ENTER&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-23T10:48:22.663" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5549" PostTypeId="1" CreationDate="2016-05-23T13:29:04.047" Score="1" ViewCount="217" Body="&lt;p&gt;Today in the evening I booted up my laptop and my login screen has changed to the following (taken from my N9)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pqgJA.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pqgJA.jpg&quot; alt=&quot;my laptop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The login screen has changed to some old looking thing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can still login to my laptop and &lt;code&gt;dpkg -l | grep greeter&lt;/code&gt; says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ii  lightdm-gtk-greeter                                         1.8.5-1ubuntu2~ubuntu14.04.1                                    amd64        simple display manager (GTK+ greeter)&#xA;ii  pantheon-greeter                                            2.0.2-0~r370+pkg43~ubuntu0.3.1                                  amd64        Pantheon Login Screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="5565" LastEditDate="2016-10-06T20:54:25.610" LastActivityDate="2016-10-06T20:54:25.610" Title="Login screen changed to old input style" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5550" PostTypeId="2" ParentId="5549" CreationDate="2016-05-23T13:36:46.837" Score="1" Body="&lt;p&gt;The package &lt;strong&gt;lightdm-gtk-greeter&lt;/strong&gt; some how got installed. Purging it and reinstalling &lt;strong&gt;pantheon-greeter&lt;/strong&gt; fixed it.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;To do it run the following commands in a terminal&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge lightdm-gtk-greeter&#xA;sudo apt-get install pantheon-greeter --reinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-23T13:36:46.837" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5551" PostTypeId="1" CreationDate="2016-05-23T15:09:08.913" Score="2" ViewCount="350" Body="&lt;p&gt;How can I stretch windows vertically so that they fill the entire available height of the screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maximizing a window fills up the total desktop space which I don't want. If the window is maximized I have to move my eyes across the entire width of the screen and jumping to the next line is difficult because one has to track their eyes along the same line backwards to find the start of the next line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want the browser to fill up the maximum vertical space. It is easier to read and I find myself doing it way often so I figured why not automate this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions are appreciated!&lt;/p&gt;&#xA;" OwnerUserId="4319" LastActivityDate="2016-09-21T16:40:39.577" Title="How to vertically maximize windows in Elementary OS?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5553" PostTypeId="1" CreationDate="2016-05-23T20:06:45.260" Score="1" ViewCount="437" Body="&lt;p&gt;Tried to connect to bluetooth device today and noticed the icon was missing from wingpanel menubar.  Logout/in, reboot, killall wingpanel, no effect.  Bluetooth is gone.  Icon still appears in System Settings but says &quot;Bluetooth is disabled&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could a system update have broken it?  Wifi still works.  Which bluetooth manager does elementary OS use?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cheers&lt;/p&gt;&#xA;" OwnerUserId="5139" LastEditorUserId="308" LastEditDate="2018-08-07T18:22:43.763" LastActivityDate="2018-08-07T18:22:43.763" Title="Bluetooth applet disappeared from wingpanel" Tags="|bluetooth|" AnswerCount="0" CommentCount="3" ClosedDate="2016-10-05T19:24:25.713" ContentLicense="CC BY-SA 4.0" />
  <row Id="5554" PostTypeId="1" CreationDate="2016-05-24T06:45:30.130" Score="2" ViewCount="176" Body="&lt;p&gt;I just upgraded from a monitor of 1680×1050 to a new one with 1920x1080 screen size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary logo is now stretched. I've tried &quot;sudo update-initramfs -u&quot; and &quot;sudo update-grub2&quot; without avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what to do?&lt;/p&gt;&#xA;" OwnerUserId="5142" LastActivityDate="2016-05-24T06:45:30.130" Title="Plymouth boot splash stretched with widescreen monitor" Tags="|display|plymouth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5556" PostTypeId="2" ParentId="5551" CreationDate="2016-05-24T13:51:55.637" Score="1" Body="&lt;p&gt;If you drag the window to the left or right of the screen, it will &quot;snap&quot; to that side, taking up the full vertical space and half the horizontal space. You can also press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;Left&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;Right&lt;/kbd&gt; to &quot;snap&quot; the active window to one side or the other.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-05-24T13:51:55.637" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5557" PostTypeId="1" CreationDate="2016-05-24T19:53:13.920" Score="1" ViewCount="4749" Body="&lt;p&gt;I am new to Linux and after becoming sick of windows 10 and doing some research decided to try and use elementary OS.  I installed elementary OS on my desktop but  for the life of me after nearly 24 hrs of messing with this cannot get internet or a connection to my network. It is a wired connection. It is getting very frustrating and is not giving a good first impression of Linux for sure.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if you need to know my hardware or not but I have a &#xA;Gigabyte 990FXA-UD7 motherboard using on-board Realtek PCIe GBE family network controller.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am about to my wits end with this.&lt;/p&gt;&#xA;" OwnerUserId="5144" LastActivityDate="2017-07-07T03:06:24.543" Title="I need help! NO internet or network connection!" Tags="|networking|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5558" PostTypeId="2" ParentId="5557" CreationDate="2016-05-24T20:44:55.240" Score="1" Body="&lt;p&gt;Ubuntu (and thus Elementary OS) seems include an old version of the Realtek networking driver. Updating the driver may fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;On another computer, download the Linux drivers from &lt;a href=&quot;http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&amp;amp;PNid=13&amp;amp;PFid=5&amp;amp;Level=5&amp;amp;Conn=4&amp;amp;DownTypeID=3&amp;amp;GetDown=false#2&quot; rel=&quot;nofollow noreferrer&quot;&gt;this page&lt;/a&gt;. (&quot;LINUX driver for kernel 3.x...&quot; is the one you want.)&lt;/li&gt;&#xA;&lt;li&gt;Copy the drivers to a USB drive, and transfer it to your Elementary OS computer.&lt;/li&gt;&#xA;&lt;li&gt;Extract and install the driver.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For more information, see &lt;a href=&quot;https://askubuntu.com/a/583095/486628&quot;&gt;this Ask Ubuntu answer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-05-25T13:51:53.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5562" PostTypeId="1" CreationDate="2016-05-25T16:34:51.340" Score="2" ViewCount="1205" Body="&lt;p&gt;I am thinking about switching to Linux, coming from Windows 10. I am an illustrator, so currently I use Photoshop CC 2015 mostly, and sometimes also use Krita (3.0 is coming out, yay), Autodesk Sketchbook Pro, Illustrator, Clip Studio Paint, Blender for 3D stuff, software for illustrators. I also need to use my Wacom Intuos Pro properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question here is: Is elementary OS a good OS for this kind of things? I mean, does it handle this types of activities well?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What made me find this OS was its simplicity and beauty. And I am looking for something like that, but that gives me (&lt;strong&gt;someone who doesn't know coding and wouldn't like to use Command Line Interface&lt;/strong&gt;) a system able to handle my work. So another question comes: can I set the icons I want to show on the dock? I know there is no place for icons on the desktop area, but if I can set the icons of the softwares I install on the dock, there is no problem for me. Actually I find it more elegant.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am looking for an OS that runs smoothly, that gives me a &quot;beautiful light environment&quot;, like a blank and yet functional canvas, where I can put my artist's softwares and just DRAW, without interference. Is elementary OS the one to go?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently switching my mind from elementary OS, Manjaro, and Mint, so any comments from you guys make here will help me a lot in my decision.&lt;/p&gt;&#xA;" OwnerUserId="5152" LastEditorUserId="84" LastEditDate="2018-05-05T23:11:41.620" LastActivityDate="2018-05-05T23:11:41.620" Title="Can I run Photoshop CC 2015 and other illustrator programs on elementary OS?" Tags="|graphics|software-recommendation|photo-editing|" AnswerCount="2" CommentCount="2" ClosedDate="2016-09-18T20:06:54.230" ContentLicense="CC BY-SA 3.0" />
  <row Id="5563" PostTypeId="1" CreationDate="2016-05-25T19:18:42.340" Score="2" ViewCount="1766" Body="&lt;p&gt;I'm facing an issue with Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time my Lenovo Y50-70 is suspended and then waked it shows a black screen with cursor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am unable to type anything nor use alt+shift+ to access the terminal. The computer simply stays frozen and I am forced to power it off and boot again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this black screen issue?&lt;/p&gt;&#xA;" OwnerUserId="4833" LastActivityDate="2019-04-10T10:02:30.497" Title="Black Screen with Cursor When Waking elementary OS from Suspension" Tags="|suspend|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5564" PostTypeId="1" CreationDate="2016-05-25T19:26:56.027" Score="1" ViewCount="3325" Body="&lt;p&gt;I have recently tried to install Elementary OS in order to replace Windows 7. My process was the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Back up files one external hard drive.&lt;/li&gt;&#xA;&lt;li&gt;Create bootable Elementary OS USB using Universal USB Installer.&lt;/li&gt;&#xA;&lt;li&gt;Boot from USB as live.&lt;/li&gt;&#xA;&lt;li&gt;Erase internal hard drive partition (in attempt to clean things up).&lt;/li&gt;&#xA;&lt;li&gt;Run installer.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;My problem is that when I tried to boot into the newly installed Elementary OS, it simply refused and did not even seem to recognize the hard drive. I have tried installing with and without encryption and using many other options but to no avail. When I use the 'scan disk for faults' utility from the USB I get the message in the title 'kernel panic-not syncing: VFS: unable to mount root fs on unknown block(2,0)'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you have any suggestions (please be kind as I am fairly new to the whole Linux way of thinking).&lt;/p&gt;&#xA;" OwnerDisplayName="user5153" LastActivityDate="2019-08-15T02:01:45.237" Title="kernel panic-not syncing: VFS: unable to mount root fs on unknown block(2,0)" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5565" PostTypeId="1" CreationDate="2016-05-25T20:21:09.773" Score="0" ViewCount="304" Body="&lt;p&gt;I am trying to install Ruby On Rails on my Elementary OS installed machine. But after giving this line of code &lt;code&gt;rbenv install 2.3.0&lt;/code&gt;. &lt;br&gt; The Following errors comes into my terminal. &lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Downloading ruby-2.3.0.tar.bz2...&#xA;-&amp;gt; https://cache.ruby-lang.org/pub/ruby/2.3/ruby-2.3.0.tar.bz2&#xA;error: failed to download ruby-2.3.0.tar.bz2&lt;/code&gt;&#xA;&lt;code&gt;BUILD FAILED (elementary OS 0.3.2 using ruby-build 20160426-25-gabb7d1d)&lt;/code&gt;&#xA;&lt;code&gt;Inspect or clean up the working tree at /tmp/ruby-build.20160526021040.24601&#xA;Results logged to /tmp/ruby-build.20160526021040.24601.log&lt;/code&gt;&#xA;&lt;code&gt;Last 10 log lines:&#xA;/tmp/ruby-build.20160526021040.24601 ~&#xA;curl: (56) SSL read: error:00000000:lib(0):func(0):reason(0), errno 104&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone please tell me, how can i overcome from this problem?&lt;/p&gt;&#xA;" OwnerUserId="5097" LastEditorUserId="16827" LastEditDate="2019-05-14T14:26:14.503" LastActivityDate="2019-05-14T14:26:14.503" Title="Installing Ruby On Rails on Elementary OS Shows build failed errors" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5566" PostTypeId="2" ParentId="5565" CreationDate="2016-05-25T20:31:18.847" Score="1" Body="&lt;p&gt;You can install ruby with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ruby&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Afterwards you can install rails with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gem install rails&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Since rails is actually a gem you can install it this way and afterwards you can generate your rails project and add other gems via the Gemfile.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did it this way and I am currently developing on rails using elementary os.&lt;/p&gt;&#xA;" OwnerUserId="4833" LastEditorUserId="4833" LastEditDate="2016-05-25T20:32:25.617" LastActivityDate="2016-05-25T20:32:25.617" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5568" PostTypeId="1" AcceptedAnswerId="5569" CreationDate="2016-05-26T03:16:21.203" Score="1" ViewCount="2013" Body="&lt;p&gt;I'm new to Elementary and Linux in general. Just installed it today. How do I find how much disk space I have and more general information about my hard drive like you can in Windows and Mac OS X? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5155" LastActivityDate="2016-05-27T10:15:23.693" Title="How do I know how much disk space I have?" Tags="|disk-management|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5569" PostTypeId="2" ParentId="5568" CreationDate="2016-05-26T07:17:49.800" Score="3" Body="&lt;p&gt;Click Power button at the top-right corner of the screen, then select About This Computer in drop-down menu.&lt;/p&gt;&#xA;" OwnerUserId="2633" LastActivityDate="2016-05-26T07:17:49.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5570" PostTypeId="1" CreationDate="2016-05-26T09:28:09.843" Score="1" ViewCount="36" Body="&lt;p&gt;On kde there are built in keyboard shortcuts that expand the current windows either horizontally whilst keeping the vertical dimension or vice versa. I was hoping to add a custom keyboard shortcut to do this and was wondering what the command would be to implement it.&lt;/p&gt;&#xA;" OwnerUserId="5157" LastActivityDate="2016-05-26T09:28:09.843" Title="Maximise Windows Vertically custom command" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5571" PostTypeId="2" ParentId="5562" CreationDate="2016-05-26T11:33:33.637" Score="2" Body="&lt;p&gt;Well... You cannot really run professional CAD and Adobe applications on Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should either use a Mac or if you want to use Linux you should be prepared for some work. There are various options:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.&#xA;There is Wine &amp;amp; PlayOnLinux that add a Windows compatibility layer to Linux but first you need to check how these applications run on Linux at the Wine App Database. Most of the apps you mentioned tend to have bugs that affect stability and usability.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.&#xA;You can run a virtual machine on your Linux installation using VirtualBox (free) or VmWare (paid). Basically you install Windows and the apps you need on the virtual machine and then use them like you would in Windows. Both VirtualBox and VmWare have a Seamless and Unity mode respectively, so that you can hide the Windows guest desktop while you run the apps on a Linux host. The caveat here is that you need lots of RAM to run things smoothly as the virtual machine will eat up about half of your computer resources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.&#xA;You can dual boot. Keep a separate Windows installation on a different partition and then boot to Windows from the BIOS/GRUB when needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.&#xA;There are open source applications that are native to Linux and can more-or-less do the job of the apps you mentioned. For a comprehensive list of available applications visit the Fedora Design Suite Wiki:&#xA;&lt;a href=&quot;http://fedoraproject.org/wiki/Design_Suite&quot; rel=&quot;nofollow&quot;&gt;http://fedoraproject.org/wiki/Design_Suite&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note though that Open Source software lacks certain features. For example Gimp (the open source Photoshop) has no native CMYK support (you need a plugin for that) and its user interface is kind of clunky.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On a final note, Elementary Os is very beautiful, shiny, fast  and user-friendly. There is the odd quirk here and there but really if you want to get your hands on Linux this is one of the best distros to start with. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However you should be prepared to learn some basic commands to run from the terminal, since there are certain things you cannot do otherwise on Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also the Software Center in Freya is not really functioning since Ubuntu abandoned it. You need to install another software center like for example App Grid (if you don't mind that it's not open source) or the Gnome software center. If you are prepared to wait for the new Loki version of Elementary Os there will be a brand new native App Center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Manjaro is also very nice but a bit more complicated than Elementary. Mint is not my cup of tea.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="5041" LastActivityDate="2016-05-26T11:33:33.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5573" PostTypeId="2" ParentId="2443" CreationDate="2016-05-26T14:37:46.037" Score="1" Body="&lt;p&gt;My solution was:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;reboot and start with a old kernel version&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;upgrade:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt- get update &amp;amp;&amp;amp; sudo apt- get upgrade&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;reboot normally.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;For now it works, but Updates show me that message. &lt;/p&gt;&#xA;" OwnerUserId="3286" LastActivityDate="2016-05-26T14:37:46.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5574" PostTypeId="1" CreationDate="2016-05-26T15:00:42.580" Score="1" ViewCount="136" Body="&lt;p&gt;I tried to turn double finger scrolling through settings but it doesn't work. Tried googling for a solution but there isn't an obvious one. Please, help me enable two finger scrolling.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess there is a problem with the driver since scrolling worked well on Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS. I trried the solution from this post - &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/821/touchpad-not-working-on-asus-x550&quot;&gt;Touchpad not working on ASUS x550&lt;/a&gt; - but it didn't work. &lt;/p&gt;&#xA;" OwnerUserId="5161" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-26T17:59:50.253" Title="Touchpad scrolling doesn't work on ASUS x540ls" Tags="|touchpad|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5576" PostTypeId="2" ParentId="5568" CreationDate="2016-05-26T16:20:09.353" Score="1" Body="&lt;p&gt;I'd second @roman's answer. &quot;About This Computer&quot; is probably the simplest way to get information about your hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more detailed information, you could install &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/raring/baobab/&quot; rel=&quot;nofollow&quot;&gt;Disk Usage Analyzer&lt;/a&gt; or &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/precise/gnome-disk-utility/&quot; rel=&quot;nofollow&quot;&gt;Disk Utility&lt;/a&gt; from the Software Center. Disk Usage Analyzer is a lot like &lt;a href=&quot;https://daisydiskapp.com/&quot; rel=&quot;nofollow&quot;&gt;DaisyDisk&lt;/a&gt; for OS X, and Disk Utility is a lot like OS X's Disk Utility.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-05-26T16:20:09.353" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5577" PostTypeId="1" AcceptedAnswerId="5578" CreationDate="2016-05-27T02:38:18.753" Score="2" ViewCount="360" Body="&lt;p&gt;I was interested with this OS, but sadly I lack experience with Linux (except a little bit with ubuntu).&lt;br&gt;&#xA;And now I have a question: What programs are available on this OS?&lt;br&gt;&#xA;Does any Linux based program will work?&lt;br&gt;&#xA;If not, where I could find full list of available programs :)&lt;br&gt;&#xA;Thanks, and btw, OS looks very nice ! :)&lt;/p&gt;&#xA;" OwnerUserId="5167" LastActivityDate="2016-05-27T10:51:55.903" Title="Available programs" Tags="|apps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5578" PostTypeId="2" ParentId="5577" CreationDate="2016-05-27T09:48:18.637" Score="0" Body="&lt;p&gt;Almost all Ubuntu programs work with elementary OS. So you can install anything you like from the software center :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remember to mark this as answer if it is the solution to your question&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-27T09:48:18.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5579" PostTypeId="2" ParentId="5568" CreationDate="2016-05-27T10:15:23.693" Score="2" Body="&lt;p&gt;If you want a command line solution try running &lt;code&gt;df -h&lt;/code&gt; in terminal. Example output on my laptop is below.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;udev            2.7G   12K  2.7G   1% /dev&#xA;tmpfs           538M  1.5M  536M   1% /run&#xA;/dev/sda6        48G   34G   12G  75% /&#xA;none            4.0K     0  4.0K   0% /sys/fs/cgroup&#xA;none            5.0M     0  5.0M   0% /run/lock&#xA;none            2.7G   70M  2.6G   3% /run/shm&#xA;none            100M   60K  100M   1% /run/user&#xA;/dev/sda5       298G  148G  151G  50% /mnt/storage&#xA;/dev/sda2        96M   68M   29M  71% /boot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It shows the free disk space for all mounted partitions&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-05-27T10:15:23.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5580" PostTypeId="2" ParentId="5577" CreationDate="2016-05-27T10:51:55.903" Score="0" Body="&lt;p&gt;As Suici Doga said, almost all Ubuntu programs work, but in personal experience, almost all with Terminal install. Some programs from Software Center didn't worked well with me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also check this page &lt;a href=&quot;https://quassy.github.io/elementary-apps/&quot; rel=&quot;nofollow&quot;&gt;https://quassy.github.io/elementary-apps/&lt;/a&gt;&#xA;&lt;br&gt;They are specific for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-05-27T10:51:55.903" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5581" PostTypeId="2" ParentId="5565" CreationDate="2016-05-27T10:56:36.430" Score="1" Body="&lt;p&gt;If you still have problem with installing ruby (I had with Jorge's method, as it would install me older version), try with instructions from this thread &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2577/how-to-install-ruby-2-2-3-on-elementary-os-freya&quot;&gt;How to install Ruby 2.2.3 on elementary OS (Freya)?&lt;/a&gt; it helped me and now I have the latest version of ruby.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-05-27T10:56:36.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5582" PostTypeId="2" ParentId="5562" CreationDate="2016-05-27T15:57:46.443" Score="1" Body="&lt;p&gt;The problem with elementary is that all adobe and other design programs are not on Linux. So as far as I know, your best choice would be a Mac, as it is beautiful and has compatibility with all those programs.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-05-27T15:57:46.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5583" PostTypeId="1" AcceptedAnswerId="5612" CreationDate="2016-05-27T17:03:17.110" Score="1" ViewCount="374" Body="&lt;p&gt;I have tried and tried installing/removing Slack native App. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It installs correctly but when I start it, I only see the icon on the Plank dock but no window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know about ScudCloud (stopped due to performance issues) and currently am running Slack as Chrome ( App mode ) but I would rather want to run the default app that gives me native notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody please help with running the native App ?&lt;/p&gt;&#xA;" OwnerUserId="2491" LastEditorUserId="242" LastEditDate="2016-05-31T17:25:30.337" LastActivityDate="2016-05-31T20:23:25.533" Title="Slack native application only shows an icon in plank but no window" Tags="|release-freya|applications|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5585" PostTypeId="1" CreationDate="2016-05-28T15:13:53.713" Score="1" ViewCount="334" Body="&lt;p&gt;I'm trying to install &lt;a href=&quot;https://launchpad.net/gloobus-preview&quot; rel=&quot;nofollow&quot;&gt;gloobus-preview&lt;/a&gt; on Freya 0.3.2 but the ppa:gloobus-dev/gloobus-preview doesn't seem to include trusty, are there alternative ppa recomendations? Is there anything else I could try? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also asked this on the gloobus-preview launchpage. &#xA;&lt;a href=&quot;https://answers.launchpad.net/gloobus-preview/+question/294541&quot; rel=&quot;nofollow&quot;&gt;https://answers.launchpad.net/gloobus-preview/+question/294541&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: After reading askubuntu I was able to install it from ppa:nilarimogard/webupd8, is that a recommended ppa? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="242" LastEditDate="2016-05-31T17:27:55.913" LastActivityDate="2016-09-24T20:50:06.293" Title="How to install Gloobus-preview?" Tags="|thirdpartyapps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5586" PostTypeId="2" ParentId="1936" CreationDate="2016-05-28T17:28:39.743" Score="1" Body="&lt;p&gt;I was also trying to figure this out. I found the following article (&amp;amp; comment) describing using dconf-editor (the configurator you mentioned?) to set gloobus-previewer as the previewer&#xA;&lt;a href=&quot;http://elementarytips.blogspot.nl/2013/04/gloobus-preview-in-elementary.html&quot; rel=&quot;nofollow&quot;&gt;http://elementarytips.blogspot.nl/2013/04/gloobus-preview-in-elementary.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Later on I found the following bug report, which sadly finished in a won't fix. &#xA;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1400501&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1400501&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2016-05-28T17:28:39.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5587" PostTypeId="1" CreationDate="2016-05-28T18:03:02.403" Score="4" ViewCount="2533" Body="&lt;p&gt;Elementary OS uses Photos to open pictures, but this has quite a couple of basic problems:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;del&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-photos/+bug/1405890&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ctrl + S does not work for Viewer edits&lt;/a&gt;&lt;/del&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/photos/issues/14&quot; rel=&quot;nofollow noreferrer&quot;&gt;Sorting of images is inconsistent with order in Files&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;del&gt;&lt;a href=&quot;https://github.com/elementary/photos/issues/50&quot; rel=&quot;nofollow noreferrer&quot;&gt;Does not support GIF files&lt;/a&gt;&lt;/del&gt; (it does now, although not animating ones yet)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/photos/issues/44&quot; rel=&quot;nofollow noreferrer&quot;&gt;Can't delete files from disk&lt;/a&gt; (Delete photos in Photo Viewer like EOG)&lt;/li&gt;&#xA;&lt;li&gt;&lt;del&gt;Navigation (next prev) takes a while to enable when opening a photo (Opening a photo, very slow navigation between them)&lt;/del&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;del&gt;&lt;a href=&quot;https://github.com/elementary/photos/issues/104&quot; rel=&quot;nofollow noreferrer&quot;&gt;Can't slide fast through photos using arrows, otherwise I'd get a full screen window&lt;/a&gt;&lt;/del&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All these things are known bugs, but most get a low priority. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the same time Files doesn't allow setting another previewer: &#xA;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1400501&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1400501&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do you guys / girls work with this? I'm having a very hard time deleting photos from disk for example. On OS X, with QuickLook it's very easy to go through images on disk, in the order used in the Finder, and delete for example the blurry ones. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: It's been a while and I've learned that these kind of &quot;questions&quot; aren't the way to go about things, I had no right to complain, venting about existing issues doesn't help anyone.&lt;br&gt;&#xA;Besides that most of these have been fixed in the mean time, fixed by people who put in the time, instead of just complained. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-02-16T23:15:33.190" LastActivityDate="2020-01-19T19:55:12.180" Title="Working with photos in ElementaryOS" Tags="|pantheon-files|photos|file-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5588" PostTypeId="1" CreationDate="2016-05-28T19:36:31.970" Score="0" ViewCount="229" Body="&lt;p&gt;I have 2 Samsung 840 Pro's that MUST be used together as one drive in RAID0. On Ubuntu it just happens out of the box with nothing to configure. But many distros never worked for me. So before I wipe Windows 10 off these drives and convert to eOS I want to make sure it just works out of the box please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System is a Intel x58 with ICH10R. It has a Hexa-Core Xeon CPU, and 12GB of DDR3. I have TWO Samsung 840 Pro's for the OS, and THREE Crucial C300's as one large Raid drive for the storage. After eOS is installed I only want to see two drives in total, sd0 and sd1, I assume. On Windows its drive C: and E: as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu does this by default, and so does Windows. Will latest elementary OS do the same? Or am I required to know how to set it up that way? Thanks&lt;/p&gt;&#xA;" OwnerUserId="5178" LastActivityDate="2016-09-30T12:55:51.777" Title="Does elementary OS see and use Intel Fake Raid as easily as Ubuntu does?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5589" PostTypeId="1" CreationDate="2016-05-28T20:37:08.457" Score="1" ViewCount="423" Body="&lt;p&gt;Is it possible to obtain testing releases of elementary OS ISO images? Otherwise - are there any repos for the latest unstable/testing/etc. packages? How do I add them here?&lt;/p&gt;&#xA;" OwnerUserId="5179" LastEditorUserId="308" LastEditDate="2018-08-07T18:11:09.773" LastActivityDate="2019-12-06T06:38:52.727" Title="Bleeding-edge elementary OS ISO or PPA?" Tags="|ppa|iso|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-12T02:06:55.663" ContentLicense="CC BY-SA 4.0" />
  <row Id="5593" PostTypeId="1" CreationDate="2016-05-29T06:21:40.117" Score="2" ViewCount="2928" Body="&lt;p&gt;I have desktop enabled but the font color is black. How can I change the icon font color to white?&lt;/p&gt;&#xA;" OwnerUserId="5124" LastActivityDate="2016-11-05T18:30:00.653" Title="How to change Desktop icon font color?" Tags="|desktop|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5594" PostTypeId="2" ParentId="5587" CreationDate="2016-05-29T10:18:23.700" Score="1" Body="&lt;p&gt;Try Gwenview instead. It's available via Softwarecenter.&#xA;Change in Setup -&gt; Applications -&gt; Image Viewer &lt;/p&gt;&#xA;" OwnerUserId="5126" LastActivityDate="2016-05-29T10:18:23.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5595" PostTypeId="1" CreationDate="2016-05-29T12:17:58.000" Score="12" ViewCount="52639" Body="&lt;p&gt;I'm trying to upgrade to Freya from Luna and I need to create a bootable usb drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu has Startup Disk Creator, what does elementary OS have?&lt;/p&gt;&#xA;" OwnerUserId="806" LastEditorUserId="37" LastEditDate="2016-11-15T14:32:11.933" LastActivityDate="2020-06-01T04:11:24.773" Title="Create Bootable USB in elementary OS" Tags="|usb|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5597" PostTypeId="1" CreationDate="2016-05-29T14:48:01.443" Score="3" ViewCount="2447" Body="&lt;p&gt;I recently switched from Windows to Elementary so I'am relatively new to linux. That was my story now to my problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to add my outlook.de email to Geary but I always getting an annoying error and I have no idea how to fix it. Strangely it works perfectly fine with an Gmail account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jzAqY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jzAqY.png&quot; alt=&quot;The Error:&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the &quot;geary --debug&quot; command to get some more informations: &lt;a href=&quot;http://pastebin.com/bnNeXzVV&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pastebin.com/bnNeXzVV&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope somebody can help my with this ;)&lt;/p&gt;&#xA;" OwnerUserId="5186" LastActivityDate="2017-05-22T02:48:26.480" Title="Geary - can't access my outlook.de account *Connection Error*" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5598" PostTypeId="1" CreationDate="2016-05-29T14:48:03.490" Score="2" ViewCount="220" Body="&lt;p&gt;As I exit out of full-screen from youtube, the picture on the computer is frozen. I can still hear the audio and the cursor can move but I cannot interact with the OS and the screen seems to be frozen. This has happened several times, it does not happen every time but enough to frustrate me. &lt;/p&gt;&#xA;" OwnerUserId="5124" LastActivityDate="2016-09-10T10:00:34.870" Title="Freya crashes when exiting full-screen from youtube" Tags="|google-chrome|midori|firefox|crash|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5601" PostTypeId="2" ParentId="5589" CreationDate="2016-05-30T01:54:20.177" Score="-1" Body="&lt;p&gt;You can try the daily PPA which contains unstable pre release software. To add it run the following commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily &#xA;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Since this gives you bleeding-edge daily builds, your system is most likely going to be broken if you do this.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="308" LastEditDate="2019-12-06T06:38:52.727" LastActivityDate="2019-12-06T06:38:52.727" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="5602" PostTypeId="1" CreationDate="2016-05-30T11:05:06.490" Score="1" ViewCount="1274" Body="&lt;p&gt;I downloaded Foxit Reader (a PDF reader) and Popcorn time. To install them, running an executable file is needed, but even if I give them the permission to be executed by everyone (Not just the root user), After double clicking or choosing 'Run' option nothing happens.&#xA;I tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x filename&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then running it, even that didn't work. I really don't know why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try to run them through the terminal (Using 'sh' command or by just typing the name of the executable file) I get an error saying the no such directory exists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded new file manager (PCManFM), When i double clicked the executable file, a pop up appered asking me to 'Execute', 'Execute in Terminal' or 'Cancel', of course non of the options worked.&#xA;I'm running Elementary OS 0.3.2 64bit&lt;/p&gt;&#xA;" OwnerUserId="5195" LastActivityDate="2016-06-29T15:33:25.730" Title="Unable to run executable files" Tags="|release-freya|system|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5603" PostTypeId="1" CreationDate="2016-05-30T13:06:20.097" Score="2" ViewCount="394" Body="&lt;p&gt;Microphone has a lot of interference which it doesn't have on the windows boot. This happens on a few different sound input applications, so it's not the fault of a single program either. The microphone is a 3.5mm jack type.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clarification: This is a desktop PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5196" LastEditorUserId="5196" LastEditDate="2016-05-30T14:56:48.447" LastActivityDate="2016-12-18T16:18:22.680" Title="Lots of microphone interferance on Freya" Tags="|release-freya|sound|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="5604" PostTypeId="1" AcceptedAnswerId="5620" CreationDate="2016-05-30T13:44:11.190" Score="1" ViewCount="2023" Body="&lt;p&gt;I am playing GTA San Andreas using Wine. When I quit the game, everything looks weird. How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: After a restart, it solves this issue. But How can I fix without restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VoY0v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VoY0v.png&quot; alt=&quot;Google Chrome&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZF1Bv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZF1Bv.png&quot; alt=&quot;Files&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PmA2a.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PmA2a.png&quot; alt=&quot;Google Chrome&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5134" LastEditorUserId="5134" LastEditDate="2016-05-30T14:29:34.677" LastActivityDate="2016-06-01T18:47:34.600" Title="Resolution problem after exiting from a game (Wine)" Tags="|resolution|wine|games|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5605" PostTypeId="2" ParentId="5602" CreationDate="2016-05-30T15:31:00.600" Score="1" Body="&lt;p&gt;Have you tried installation as on &lt;a href=&quot;https://www.foxitsoftware.com/downloads/thanks.php?product=Foxit-Reader&amp;amp;platform=Linux-64-bit&amp;amp;version=1.1.0.0225&amp;amp;package_type=run&amp;amp;language=English&quot; rel=&quot;nofollow&quot;&gt;https://www.foxitsoftware.com/downloads/thanks.php?product=Foxit-Reader&amp;amp;platform=Linux-64-bit&amp;amp;version=1.1.0.0225&amp;amp;package_type=run&amp;amp;language=English&lt;/a&gt; advised?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;filename.run executable will be start with ./filename.run&#xA;Also you can start it from filemanager with right click extract.&#xA;I have tested Foxit Reader without problems.&lt;/p&gt;&#xA;" OwnerUserId="5126" LastActivityDate="2016-05-30T15:31:00.600" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5607" PostTypeId="1" CreationDate="2016-05-30T20:32:22.757" Score="1" ViewCount="302" Body="&lt;p&gt;When I close the lid, Elementary suspends the system. However, when I try to restart, it keeps flashing the screen with junk without ever recovering. The only option I have is to do a hard reset. Is there a fix for this?&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2017-09-10T10:39:34.133" Title="Laptop lid close does not restart" Tags="|suspend|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5608" PostTypeId="2" ParentId="5587" CreationDate="2016-05-30T22:24:27.200" Score="2" Body="&lt;p&gt;When searching for Gwenview I came across Eye of Gnome (eog).&#xA;&lt;a href=&quot;https://wiki.gnome.org/Apps/EyeOfGnome&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Apps/EyeOfGnome&lt;/a&gt;&#xA;It doesn't have as many editing tools, but it also doesn't have most of the issues I ran into with Photos. (The file order is wrong, but you can open a slideshow. And you can open multiple images in the same window, which makes that less painful).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it right away with Sideload: &lt;a href=&quot;https://flathub.org/repo/appstream/org.gnome.eog.flatpakref&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/repo/appstream/org.gnome.eog.flatpakref&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="19079" LastEditDate="2020-01-19T19:55:12.180" LastActivityDate="2020-01-19T19:55:12.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="5610" PostTypeId="1" CreationDate="2016-05-31T16:22:45.240" Score="0" ViewCount="317" Body="&lt;p&gt;When locking, the screen goes black and the system becomes unresponsive. I have looked carefully for available solutions and have tried them. None have worked for me. I am using Radeon R9 285/380 with the proprietary drivers. The X.ORG drivers do not support the resolution/type of my screen. Has anyone come up with a solution to this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am having the same problem as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3504/black-screen-when-try-to-lock-screen&quot;&gt;Black screen when try to lock screen&lt;/a&gt;&#xA;and &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/586/once-locked-screen-stays-black-and-cannot-be-unlocked&quot;&gt;Once locked, screen stays black and cannot be unlocked&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I have manually installed AMD's proprietary driver and it did not fix the issue.&lt;/p&gt;&#xA;" OwnerUserId="5203" LastEditorUserId="5203" LastEditDate="2016-05-31T22:59:18.200" LastActivityDate="2024-03-24T18:04:20.470" Title="Black, Unresponsive screen when Locking Desktop Session" Tags="|greeter|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5612" PostTypeId="2" ParentId="5583" CreationDate="2016-05-31T20:23:25.533" Score="1" Body="&lt;p&gt;So, today I downloaded a fresh app  ( .deb [64bit] ) from Slack site and surprisingly it worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either some downstream fixes from Elementary packages or fixed version 2.0.6 of Slack application, but the app works now.&lt;/p&gt;&#xA;" OwnerUserId="2491" LastActivityDate="2016-05-31T20:23:25.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5615" PostTypeId="2" ParentId="5604" CreationDate="2016-06-01T10:45:19.733" Score="1" Body="&lt;p&gt;This is an issue with Wine. Because GTA SA uses some method to close itself which Wine is not familiar with, it exits unexpectedly. This makes Wine unable to reset the resolution back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The most easy fix for this is to run GTA SA in a &quot;virtual desktop&quot;. You can do this by going to &lt;em&gt;Wine configuration&lt;/em&gt;, Graphics and turning on virtual desktops.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="242" LastEditDate="2016-06-01T18:45:38.040" LastActivityDate="2016-06-01T18:45:38.040" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5616" PostTypeId="2" ParentId="4927" CreationDate="2016-06-01T11:50:16.947" Score="1" Body="&lt;p&gt;This happens because of main display is the one which is with the white start in it. It's possible to choose any display as the main display by clicking on the star. This is hard to miss. But I missed it somehow. Hope this will help somebody. &lt;/p&gt;&#xA;" OwnerUserId="4221" LastActivityDate="2016-06-01T11:50:16.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5617" PostTypeId="1" CreationDate="2016-06-01T14:49:27.147" Score="3" ViewCount="1916" Body="&lt;p&gt;I used the following commands to try and upgrade to Freya.&#xA;&quot;sudo apt-get update&quot; - no problem&#xA;&quot;sudo apt-get upgrade&quot; - no problem&#xA;&quot;sudo apt-get dist-upgrade&quot; - what? nothing available ?&#xA;From such a class act as Elementary, I expected better.&lt;br&gt;&#xA;I even went as far as going into the GUI and using software updater. I found the same result, no upgrade available. &lt;/p&gt;&#xA;" OwnerUserId="5206" LastEditorUserId="4185" LastEditDate="2016-06-22T14:34:18.240" LastActivityDate="2020-01-05T06:06:06.293" Title="Upgrading Distro from Luna to Freya" Tags="|release-freya|system-installation|updates|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5618" PostTypeId="2" ParentId="5617" CreationDate="2016-06-01T15:10:52.553" Score="6" Body="&lt;p&gt;There isn't currently a way to upgrade from one release of elementary OS to another. From the &lt;a href=&quot;http://blog.elementary.io/post/116134677986/freya-is-here&quot; rel=&quot;noreferrer&quot;&gt;release announcement&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary OS Luna users should back up their data and perform a clean install.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Upgrading to elementary OS Loki will probably &lt;a href=&quot;https://twitter.com/elementary/status/730802325967642624&quot; rel=&quot;noreferrer&quot;&gt;require a clean install as well&lt;/a&gt;. Upgrade support is &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1486694&quot; rel=&quot;noreferrer&quot;&gt;planned&lt;/a&gt; for a future version of elementary OS, though.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="308" LastEditDate="2016-06-13T11:21:13.203" LastActivityDate="2016-06-13T11:21:13.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5620" PostTypeId="2" ParentId="5604" CreationDate="2016-06-01T18:47:34.600" Score="1" Body="&lt;p&gt;The easiest way to fix this is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; - &lt;code&gt;switchboard&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open &quot;Displays&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Set your normal screen resolution.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I am not aware of any way to have this fix itself automatically.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-06-01T18:47:34.600" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5621" PostTypeId="1" CreationDate="2016-06-01T22:55:45.523" Score="1" ViewCount="669" Body="&lt;p&gt;Ok, so I just downloading Elementary OS, and I &lt;em&gt;love&lt;/em&gt; it! However, I can't seem to install Gtk+ 3.0:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ryan@DevPC-LX /media/ryan/stuff/howl/src master $ sudo apt-get install libgtk-3-dev&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; libgtk-3-dev : Depends: libgtk-3-0 (= 3.10.8-0ubuntu1.6) but 3.14.15-0ubuntu1~14.04~ricotz1 is to be installed&#xA;                Depends: gir1.2-gtk-3.0 (= 3.10.8-0ubuntu1.6) but 3.14.15-0ubuntu1~14.04~ricotz1 is to be installed&#xA;                Depends: libglib2.0-dev (&amp;gt;= 2.37.5) but it is not going to be installed&#xA;                Depends: libgdk-pixbuf2.0-dev (&amp;gt;= 2.27.1) but it is not going to be installed&#xA;                Depends: libpango1.0-dev (&amp;gt;= 1.32.4) but it is not going to be installed&#xA;                Depends: libatk1.0-dev (&amp;gt;= 2.7.5) but it is not going to be installed&#xA;                Depends: libatk-bridge2.0-dev but it is not going to be installed&#xA;                Depends: libcairo2-dev (&amp;gt;= 1.13.0~20140204) but it is not going to be installed&#xA;                Depends: libwayland-dev (&amp;gt;= 1.2.0) but it is not going to be installed&#xA;                Depends: libxkbcommon-dev but it is not going to be installed&#xA;                Depends: libxi-dev but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;ryan@DevPC-LX /media/ryan/stuff/howl/src master $ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This kind of sucks, since my favorite text editor requires Gtk+ to run...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bizarrely, installing &lt;code&gt;gedit&lt;/code&gt; &lt;em&gt;does&lt;/em&gt; work. Also, I already tried Aptitude:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ryan@DevPC-LX /media/ryan/stuff/howl/src master $ sudo aptitude install libgtk-3-dev&#xA;The following NEW packages will be installed:&#xA;  gcc-4.9-base:i386{a} libatk-bridge2.0-dev{a} libatk1.0-dev{ab} libc6:i386{a} &#xA;  libcairo-script-interpreter2{a} libcairo2-dev{ab} libelfg0:i386{a} libexpat1-dev{a} libffi6:i386{a} &#xA;  libfontconfig1-dev{a} libfreetype6-dev{a} libgcc1:i386{a} libgdk-pixbuf2.0-dev{a} &#xA;  libglib2.0-0:i386{ab} libglib2.0-bin:i386{ab} libglib2.0-dev{ab} libgtk-3-dev{b} libharfbuzz-dev{a} &#xA;  libharfbuzz-gobject0{a} libice-dev{a} libpango1.0-dev{ab} libpcre3:i386{a} libpcre3-dev{a} &#xA;  libpcrecpp0{a} libpixman-1-dev{a} libpng12-dev{a} libpthread-stubs0-dev{a} libselinux1:i386{a} &#xA;  libsm-dev{a} libwayland-dev{ab} libx11-dev{a} libx11-doc{a} libxau-dev{a} libxcb-render0-dev{a} &#xA;  libxcb-shm0-dev{a} libxcb1-dev{a} libxcomposite-dev{a} libxcursor-dev{a} libxdamage-dev{a} &#xA;  libxdmcp-dev{a} libxext-dev{a} libxfixes-dev{a} libxft-dev{a} libxi-dev{ab} libxinerama-dev{a} &#xA;  libxkbcommon-dev{ab} libxrandr-dev{a} libxrender-dev{a} x11proto-composite-dev{a} x11proto-core-dev{a} &#xA;  x11proto-damage-dev{a} x11proto-fixes-dev{a} x11proto-input-dev{a} x11proto-kb-dev{a} &#xA;  x11proto-randr-dev{a} x11proto-render-dev{a} x11proto-xext-dev{a} x11proto-xinerama-dev{a} &#xA;  xorg-sgml-doctools{a} xtrans-dev{a} zlib1g:i386{a} zlib1g-dev{a} &#xA;0 packages upgraded, 62 newly installed, 0 to remove and 189 not upgraded.&#xA;Need to get 15.3 MB of archives. After unpacking 75.7 MB will be used.&#xA;The following packages have unmet dependencies:&#xA; libpango1.0-dev : Depends: libpango-1.0-0 (= 1.36.3-1ubuntu1.1) but 1.36.8-0ubuntu1~14.04~ricotz1 is installed.&#xA;                   Depends: libpangocairo-1.0-0 (= 1.36.3-1ubuntu1.1) but 1.36.8-0ubuntu1~14.04~ricotz1 is installed.&#xA;                   Depends: libpangoft2-1.0-0 (= 1.36.3-1ubuntu1.1) but 1.36.8-0ubuntu1~14.04~ricotz1 is installed.&#xA;                   Depends: libpangoxft-1.0-0 (= 1.36.3-1ubuntu1.1) but 1.36.8-0ubuntu1~14.04~ricotz1 is installed.&#xA;                   Depends: gir1.2-pango-1.0 (= 1.36.3-1ubuntu1.1) but 1.36.8-0ubuntu1~14.04~ricotz1 is installed.&#xA; libxkbcommon-dev : Depends: libxkbcommon0 (= 0.4.1-0ubuntu1) but 0.4.3-2~14.04~ricotz1 is installed.&#xA; libwayland-dev : Depends: libwayland-client0 (= 1.4.0-1ubuntu1) but 1.6.0-0ubuntu1~14.04~ricotz0 is installed.&#xA;                  Depends: libwayland-server0 (= 1.4.0-1ubuntu1) but 1.6.0-0ubuntu1~14.04~ricotz0 is installed.&#xA;                  Depends: libwayland-cursor0 (= 1.4.0-1ubuntu1) but 1.6.0-0ubuntu1~14.04~ricotz0 is installed.&#xA; libglib2.0-0 : Breaks: libglib2.0-0:i386 (!= 2.42.2-0ubuntu1~14.04~ricotz0) but 2.40.2-0ubuntu1 is to be installed.&#xA; libglib2.0-0:i386 : Breaks: libglib2.0-0 (!= 2.40.2-0ubuntu1) but 2.42.2-0ubuntu1~14.04~ricotz0 is installed.&#xA; libglib2.0-dev : Depends: libglib2.0-0 (= 2.40.2-0ubuntu1) but 2.42.2-0ubuntu1~14.04~ricotz0 is installed.&#xA; libxi-dev : Depends: libxi6 (= 2:1.7.1.901-1ubuntu1.1) but 2:1.7.4-1~14.04~ricotz1 is installed.&#xA; libcairo2-dev : Depends: libcairo2 (= 1.13.0~20140204-0ubuntu1.1) but 1.14.2-1ubuntu1~trusty1 is installed.&#xA;                 Depends: libcairo-gobject2 (= 1.13.0~20140204-0ubuntu1.1) but 1.14.2-1ubuntu1~trusty1 is installed.&#xA; libglib2.0-bin : Conflicts: libglib2.0-bin:i386 but 2.40.2-0ubuntu1 is to be installed.&#xA; libglib2.0-bin:i386 : Conflicts: libglib2.0-bin but 2.42.2-0ubuntu1~14.04~ricotz0 is installed.&#xA; libatk1.0-dev : Depends: libatk1.0-0 (= 2.10.0-2ubuntu2) but 2.14.0-1ubuntu1~trusty1 is installed.&#xA;                 Depends: gir1.2-atk-1.0 (= 2.10.0-2ubuntu2) but 2.14.0-1ubuntu1~trusty1 is installed.&#xA; libgtk-3-dev : Depends: libgtk-3-0 (= 3.10.8-0ubuntu1.6) but 3.14.15-0ubuntu1~14.04~ricotz1 is installed.&#xA;                Depends: gir1.2-gtk-3.0 (= 3.10.8-0ubuntu1.6) but 3.14.15-0ubuntu1~14.04~ricotz1 is installed.&#xA;open: 59; closed: 364; defer: 44; conflict: 104                                                             .The following actions will resolve these dependencies:&#xA;&#xA;      Keep the following packages at their current version:&#xA;1)      libatk-bridge2.0-dev [Not Installed]               &#xA;2)      libatk1.0-dev [Not Installed]                      &#xA;3)      libcairo2-dev [Not Installed]                      &#xA;4)      libgdk-pixbuf2.0-dev [Not Installed]               &#xA;5)      libglib2.0-0:i386 [Not Installed]                  &#xA;6)      libglib2.0-bin:i386 [Not Installed]                &#xA;7)      libglib2.0-dev [Not Installed]                     &#xA;8)      libgtk-3-dev [Not Installed]                       &#xA;9)      libpango1.0-dev [Not Installed]                    &#xA;10)     libwayland-dev [Not Installed]                     &#xA;11)     libxi-dev [Not Installed]                          &#xA;12)     libxkbcommon-dev [Not Installed]                   &#xA;&#xA;&#xA;&#xA;Accept this solution? [Y/n/q/?] y&#xA;No packages will be installed, upgraded, or removed.&#xA;0 packages upgraded, 0 newly installed, 0 to remove and 189 not upgraded.&#xA;Need to get 0 B of archives. After unpacking 0 B will be used.&#xA;&#xA;ryan@DevPC-LX /media/ryan/stuff/howl/src master $ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5208" LastActivityDate="2016-09-24T20:51:00.043" Title="Can't install gtk+" Tags="|software-installation|gtk|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5622" PostTypeId="2" ParentId="5621" CreationDate="2016-06-01T23:14:50.553" Score="1" Body="&lt;p&gt;Figured it out! I just followed the directions &lt;a href=&quot;https://web.archive.org/web/20140724095302/http://elementaryos.org/answers/sudo-apt-get-update-fails&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; but instead used my text editor, going to all the APT sources files (as well as the saves!) and changing &lt;code&gt;freya&lt;/code&gt; to &lt;code&gt;trusty&lt;/code&gt;. One &lt;code&gt;apt update&lt;/code&gt; later, and it installed!&lt;/p&gt;&#xA;" OwnerUserId="5208" LastEditorUserId="26" LastEditDate="2016-09-24T20:51:00.043" LastActivityDate="2016-09-24T20:51:00.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5624" PostTypeId="1" AcceptedAnswerId="5625" CreationDate="2016-06-02T17:30:36.523" Score="0" ViewCount="1467" Body="&lt;p&gt;When I don't use one of the default applications in elementary OS I usually hide it from the Applications menu using MenuLibre, rather than uninstalling them. However I can't seem to be able to do that with Nepomuk Cleaner, since as soon as I check &quot;hide from menu&quot; another .desktop entry for said program is created, i.e. if I hide &quot;nepomukcleaner.desktop&quot;, as soon as I save those changes another file (something like &quot;nepomukcleaner1.desktop&quot;) is created, and shows up alongside the previous, now hidden, entry. If I try to hide this one, a third .desktop file is created, and so on.&#xA;Same thing happens if I try to delete it.&lt;/p&gt;&#xA;" OwnerUserId="4490" LastActivityDate="2018-03-30T11:24:06.780" Title="What is Nepomuk Cleaner? And why does it keep recreating its .desktop file after I delete it?" Tags="|applications|menu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5625" PostTypeId="2" ParentId="5624" CreationDate="2016-06-02T21:35:10.247" Score="0" Body="&lt;p&gt;Launching MenuLibre with sudo seems to work, I hid it and it didn't reappear.&lt;/p&gt;&#xA;" OwnerUserId="4490" LastActivityDate="2016-06-02T21:35:10.247" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="5626" PostTypeId="2" ParentId="5624" CreationDate="2016-06-03T01:19:08.370" Score="1" Body="&lt;p&gt;If you want to uninstall it , open &lt;strong&gt;Software Center&lt;/strong&gt; search for &lt;strong&gt;Nepomuk Cleaner&lt;/strong&gt; and click remove.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not included by default in elementary OS so it is safe to remove&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-03T01:19:08.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5627" PostTypeId="1" CreationDate="2016-06-03T03:28:21.987" Score="0" ViewCount="109" Body="&lt;p&gt;I've made two stupid mistakes today: I mistakenly uninstalled a lot of programs through the terminal &amp;amp; I tried receiving help on the ubuntu stack exchange instead of here (which I didn't know about).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - I ran &lt;code&gt;sudo aptitude&lt;/code&gt; to find a specific package that I wanted to delete. I pressed &quot;Install/Remove Pkgs&quot; and there was a section of packages that were to be removed because they were &quot;no longer used&quot;. So, I did a noobish move and pressed &quot;g&quot; to remove these seemingly unused packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The menu closed and the terminal processes began, I watched. I started seeing programs that were obviously being used by me. So, I hurried up and exited terminal to stop the process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few moments later, I saw some applications including the software center disappear. &lt;strong&gt;A lot&lt;/strong&gt; of programs, packages and dependencies were wiped before I ended the process midway through the damage. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - I decided to go to the ubuntu stack exchange for help. I had a history log file of everything uninstalled and was hoping there was a way to get all of that back at one time. I was hoping that I could batch download/install everything that was uninstalled with that information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a long time, I basically got all my answers from the ubunu stack exchange. Since elementary is based on ubuntu, I thought they were pretty much the same and worked the same way. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got an answer and due to my ignorance on desktop eviornments, one command they gave me was to reinstall the ubuntu desktop. Once I rebooted, I came to see the ubuntu login screen and that everything was literally  ubuntu. I also got a hand full of errors, the application menu is semi transparent and there is most likely more issues prevalent. I now know that elementary uses the pantheon desktop, a little too late I suppose. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Though it did work in terms of reinstalling the native apps like software center at least, everything I lost earlier hasn't been recovered. But even worst, I don't have the pantheon desktop environment anymore and what I have now is messed up, probably more than what I can notice. I guess the bright side is that it &lt;em&gt;does&lt;/em&gt; work at least. But I think I broke it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me resolve this? can things be repaired? or am I just screwed?&lt;/p&gt;&#xA;" OwnerUserId="5217" LastActivityDate="2016-08-02T13:00:14.710" Title="I think I just broke elementary and have no idea what to do, can someone help?" Tags="|desktop|command-line|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5629" PostTypeId="2" ParentId="5627" CreationDate="2016-06-03T11:37:58.460" Score="2" Body="&lt;p&gt;Seems to me you can only do is to reinstall elementary OS. If there some files you want to backup, try it, but that's what I would do, reinstall system.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-06-03T11:37:58.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5630" PostTypeId="1" CreationDate="2016-06-03T15:02:16.800" Score="1" ViewCount="789" Body="&lt;p&gt;My hardware specifications include a 256 GB &lt;s&gt;HDD&lt;/s&gt; SSD and 8 GB of RAM. Recently, eOS has started taking around 30 seconds to load wingpanel and plank after login screen.&#xA;I referred to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2474/wingpanel-taking-a-long-time-to-load-after-update&quot;&gt;this&lt;/a&gt; question earlier, but couldn't find a solution. The waiting time is unbearable. The only startup application I have is &lt;a href=&quot;http://jonls.dk/redshift/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Redshift&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recent installs include few global node packages. Looking for a solution to this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5222" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-05-31T07:26:51.093" Title="elementary OS: Wingpanel and plank load very slowly at boot" Tags="|release-freya|boot|wingpanel|plank|" AnswerCount="1" CommentCount="5" ClosedDate="2018-03-11T02:00:40.277" ContentLicense="CC BY-SA 3.0" />
  <row Id="5632" PostTypeId="1" AcceptedAnswerId="6656" CreationDate="2016-06-03T21:33:14.563" Score="2" ViewCount="2737" Body="&lt;p&gt;I'm trying to install popcorn-time.to &lt;a href=&quot;http://popcorn-time.to/&quot; rel=&quot;nofollow noreferrer&quot;&gt;through their website&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After extracting it I tried to run ./Popcorn-Time but it gave me an error about missing libudev.so.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then proceeded to follow &lt;a href=&quot;https://askubuntu.com/questions/576516/install-from-tar-gz&quot;&gt;this thread's advice&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It started running but now every time I open it, it isn't popcorn-time.to it is time4popcorn which looks a lot like malware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lsKxz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lsKxz.png&quot; alt=&quot;time4popcorn.eu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've had this happen to me before when I first started using Linux with Mint but now I'm not being able to fix it as easily.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems to be a common issue and I'm note even being able to install it through a ppa so I'm keeping and updating this thread for future people with this problem.&lt;/p&gt;&#xA;" OwnerUserId="5223" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2018-12-02T15:19:02.203" Title="Trouble installing Popcorn-time.to" Tags="|software-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="5633" PostTypeId="1" AcceptedAnswerId="5635" CreationDate="2016-06-04T01:53:45.360" Score="1" ViewCount="2532" Body="&lt;p&gt;Sorry for the really dumb question. I've been using elementary for a day now and am trying to copy over the &lt;a href=&quot;https://www.reddit.com/r/firefox/comments/4i8kib/the_faviconreloader_addon_is_gone_if_you_really/&quot; rel=&quot;nofollow&quot;&gt;folder for an extension&lt;/a&gt; to the Firefox extensions folder (which I finally found). Unfortunately, when I try to do so it tells me that there is an &quot;Eror while copying,&quot; and that &quot;The folder &quot;FavIconReloader@mozilla.org&quot; cannot be copied because you do not have permissions to create it in the destination.&quot; Being the only user on the OS I'm the Admin, yet can't figure out how to be allowed to copy files over to folders with that little lock on their bottom right corner. I've yet to learn my way around Terminal commands, so I'm wondering if there's a simple GUI option for this that I'm not noticing. Again, sorry for the really basic question.&lt;/p&gt;&#xA;" OwnerUserId="4844" LastActivityDate="2019-05-06T02:37:26.267" Title="How do I copy files/folders over to locked folders?" Tags="|folder|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5635" PostTypeId="2" ParentId="5633" CreationDate="2016-06-04T07:01:25.660" Score="2" Body="&lt;p&gt;Try running files as an administrator (root) by right clicking &lt;strong&gt;Files&lt;/strong&gt; and clicking &lt;strong&gt;Open Files As Administrator&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mCBYB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mCBYB.png&quot; alt=&quot;Menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should be opened as administrator now.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-04T07:01:25.660" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="5636" PostTypeId="1" CreationDate="2016-06-04T09:13:58.197" Score="1" ViewCount="6181" Body="&lt;p&gt;elementary OS works but only when i go to advanced startup, i can access it from there. On startup, the grub menu doesn't appear - it goes straightaway to windows 10. is there a way to show the grub menu at startup? i have already tried using easy BCD. &lt;/p&gt;&#xA;" OwnerUserId="5225" LastActivityDate="2016-09-24T22:28:59.733" Title="how to get the grub menu to show when starting computer" Tags="|boot|grub|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5637" PostTypeId="2" ParentId="5632" CreationDate="2016-06-04T13:48:44.803" Score="0" Body="&lt;p&gt;Installing stuff from random websites registered in Tonga (.to) almost never comes to an happy end. &#xA;Would you drop random pills some stranger gives you for free in a dark back alley just on his promise that it'll be fun? &#xA;Of course you are not able to install it through a ppa. You wouldn't get the rainbow mystery pills in a pharmacy either. lol&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-06-04T13:48:44.803" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="5639" PostTypeId="2" ParentId="5636" CreationDate="2016-06-04T19:46:59.337" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;In Terminal put in: sudo gedit /etc/default/grub&lt;/li&gt;&#xA;&lt;li&gt;Do this: &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0 -&amp;gt; #GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;This allows the the grub menu to be displayed and not hidden.&lt;/li&gt;&#xA;&lt;li&gt;Save the file&lt;/li&gt;&#xA;&lt;li&gt;In terminal put in: sudo update-grub&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This might not work but is one of the most common reasons for grub to be hiding.&lt;/p&gt;&#xA;" OwnerUserId="5233" LastEditorUserId="26" LastEditDate="2016-09-24T20:51:44.530" LastActivityDate="2016-09-24T20:51:44.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5640" PostTypeId="5" CreationDate="2016-06-05T01:14:51.227" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-06-05T01:14:51.227" LastActivityDate="2016-06-05T01:14:51.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5641" PostTypeId="4" CreationDate="2016-06-05T01:14:51.227" Score="0" Body="Questions about using and connecting to the internet on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-06-17T03:30:42.383" LastActivityDate="2016-06-17T03:30:42.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5642" PostTypeId="5" CreationDate="2016-06-05T01:15:47.917" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-06-05T01:15:47.917" LastActivityDate="2016-06-05T01:15:47.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="5643" PostTypeId="4" CreationDate="2016-06-05T01:15:47.917" Score="0" Body="Questions about desktop wallpapers on elementary OS" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-06-17T03:30:45.027" LastActivityDate="2016-06-17T03:30:45.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6640" PostTypeId="1" CreationDate="2016-06-05T05:14:03.513" Score="0" ViewCount="74" Body="&lt;p&gt;Having some troubles installing Linux on my desktop computer, just wondering if anyone might be able to give me some sort of direction. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically had a great experience with Linux, terrible one with Windows. Have been wanting to put Linux on the desktop for awhile but held off because of program compatibility. Lately windows has been stuck in recovery loop, got sick of it, and this morning I installed linux over it. Assume that something is damaged and might need a new Harddrive but hoping not?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It isn't dual installed with Windows. A few months ago I was going to try but it looked way out of my expertise. And this morning I just didn't care enough to try save my stuff. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I had initial problems when I clicked install. I didn't save the error but it said something like the partition was acting like it had windows on it, but it was corrupted or had a problem and I had to click okay on it. Installed all right, I could use it. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Pretty much the only windows program I use at the moment is World of Warcraft to muck around on when i'm bored, so was messing round trying to see if I could get it running first and foremost. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I updated Wine. Noticed that when I left the computer and it idled and the screen went off, I couldn't get it back on. Restarted it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Installed Tweaks, too. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I'd looked up a page of 'what to do with a fresh install' and followed a tutorial on changing graphics cards settings because, well, figured that was the next step. Reset the computer as per instruction. Battle.net client/screen thing went white, and I couldn't use it so I assumed I messed that up.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Found a better tutorial on how to install my driver and was going back to give it a try when I got the sleep mode problem again. Restarted.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Trouble restarting. I got a prompt from something called busybox and now I'm stuck. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And if it helps the problems I had with Windows were:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;It booted all my devices off the internet and messed with my router every 30 seconds or so. Resolved. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Periodically just threw a fit and died. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Problem with the sound dying after an update. Resolved.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;100% disk usage glitch, which froze up the computer. Partially resolved. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Start menu glitch after an update. Resolved. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Last 6 months or so it's just been crashing and stuck in recovery loop. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Haven't kept a strict record and I know there's been some other lame glitchy things happen that I haven't remembered, mostly just new os related stuff though I think. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Haven't used it that much mainly because of the internet problem, it was an expensive paperweight for a long time. Guessing it had some malware or viruses on it or whatever on it to cause the recovery problem - would that be enough to wreck the drive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated :). I will try to provide details for any questions asked. &lt;/p&gt;&#xA;" OwnerUserId="5235" LastActivityDate="2018-03-19T15:07:44.947" Title="Problems installing over Windows 10" Tags="|system-installation|microsoft-windows|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6641" PostTypeId="2" ParentId="628" CreationDate="2016-06-05T09:48:59.603" Score="0" Body="&lt;p&gt;Correct local path is &lt;code&gt;/home/&amp;lt;username&amp;gt;/.local/share/backgrounds&lt;/code&gt; here you can drop images without administrative privileges&lt;/p&gt;&#xA;" OwnerUserId="4208" LastActivityDate="2016-06-05T09:48:59.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6642" PostTypeId="2" ParentId="4343" CreationDate="2016-06-05T10:04:30.673" Score="1" Body="&lt;p&gt;I've the same problem no dockable windows, as a workaround I use to add hangout as a standalone app, using chrome app extension then each set always on top on popup windows&lt;/p&gt;&#xA;" OwnerUserId="4208" LastActivityDate="2016-06-05T10:04:30.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6644" PostTypeId="2" ParentId="5636" CreationDate="2016-06-05T13:09:11.787" Score="0" Body="&lt;p&gt;You can install &lt;a href=&quot;https://launchpad.net/~danielrichter2007/+archive/ubuntu/grub-customizer&quot; rel=&quot;nofollow&quot;&gt;Grub Customizer&lt;/a&gt; and setup how you like easly. Just make some small changes like move up then down, remove something you don't need, save it and that's it.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-06-05T13:09:11.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6645" PostTypeId="1" CreationDate="2016-06-05T14:54:00.493" Score="1" ViewCount="247" Body="&lt;p&gt;As per the title it describes most of what happens. I install the 32-bit ISO on a memory stick with unetbootin and when I boot the boot logo displays fine then it goes to the wallpaper with nothing else. No icons, taskbars. Nothing. I can access the terminal with alt+f2 but the GUI won't restart. I've tried mutliple different distros of linux and even if they install I still get stuck on just the wallpaper with no elements. I'm using a Integrated CPU board: &lt;a href=&quot;http://ark.intel.com/products/69041/Intel-Desktop-Board-D2550DC2&quot; rel=&quot;nofollow&quot;&gt;http://ark.intel.com/products/69041/Intel-Desktop-Board-D2550DC2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5237" LastActivityDate="2016-09-25T09:23:53.300" Title="When installing the GUI fails to load and only shows wallpaper" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6646" PostTypeId="2" ParentId="6645" CreationDate="2016-06-05T20:37:29.617" Score="1" Body="&lt;p&gt;Open the Terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common &#xA;sudo add-apt-repository -y ppa:elementary-os/os-patches&#xA;sudo add-apt-repository -y ppa:elementary-os/stable&#xA;sudo apt remove elemntary-desktop&#xA;sudo apt purge elemntary-desktop&#xA;Sudo apt update&#xA;sudo apt install elemntary-desktop&#xA;sudo apt full-upgrade&#xA;sudo apt dist-upgrade&#xA;sudo reboot now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tell us if that helps.&lt;/p&gt;&#xA;" OwnerUserId="5238" LastEditorUserId="26" LastEditDate="2016-09-25T09:23:53.300" LastActivityDate="2016-09-25T09:23:53.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6647" PostTypeId="2" ParentId="3855" CreationDate="2016-06-05T20:55:32.657" Score="1" Body="&lt;p&gt;Maya is currently not designed to support this. According to elementary guidelines it also should not support this: they adhere the principle of apps doing one thing, and doing that in a great way. Calendars are not todo lists, so there are other apps better suited for this purpose. I.e. Go For It is a very nice app for this. &lt;/p&gt;&#xA;" OwnerUserId="63" LastActivityDate="2016-06-05T20:55:32.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6648" PostTypeId="1" AcceptedAnswerId="6659" CreationDate="2016-06-05T22:06:20.550" Score="3" ViewCount="70" Body="&lt;p&gt;I've seen plenty of questions about this, I'm unsure whether it's a lack of processing power or something with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure what to look for in any logs. I'm dual booting Windows 10 and Elementary OS 0.3.2 Freya (64-bit).  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Processor: Quad-Core AMD A8-7410 APU with AMD Radeon R5 Graphics&#xA;Memory: 3.3 GiB&#xA;Graphics: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 45)&#xA;Storage: 165.0 GB&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My laptop is a HP 15z-af100.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need any log data or something let me know, I can reproduce this by simply trying to apt-get upgrade my GTK theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt; - Not related to the theme, tried installing a package and it also froze (install via a .deb file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Easy for me to reproduce. I can't get into Ctrl-Alt-F1 or F2. I can only shut up manually or with Ctrl+Alt+SysRq+B.&lt;/p&gt;&#xA;" OwnerUserId="5230" LastEditorUserId="5230" LastEditDate="2016-06-06T20:01:23.977" LastActivityDate="2016-09-08T00:48:20.103" Title="Laptop Freezes When Upgrading Package" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6649" PostTypeId="2" ParentId="2611" CreationDate="2016-06-06T02:04:14.343" Score="1" Body="&lt;p&gt;You need to use &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; to access (and log in via) the terminal. Then you can use any commmands can find in the help or know yourself to re-install packages). Similarly &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; will get you back in GUI mode (if one exists) although I usually reboot to test whether the changes have fixed the issue with &lt;code&gt;sudo reboot&lt;/code&gt; or &lt;code&gt;sudo shutdown now&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then it is also possible to troubleshoot the issue or reboot into an earlier version (if it is a kernel issue). When I encountered similar issues, the information on Ubuntu forums such as the one below were sufficient to troubleshoot in Elemetntary OS (note that eOS Freya is based on Ubuntu Trusty 12.04). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/189399/cannot-get-past-login-screen&quot;&gt;https://askubuntu.com/questions/189399/cannot-get-past-login-screen&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5205" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-06-29T03:32:08.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6650" PostTypeId="1" CreationDate="2016-06-06T02:12:36.330" Score="2" ViewCount="174" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5ZQdL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5ZQdL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are options fixed by: library, Events and Tags. I just want find a way to pin an option to organize by folders.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry my english&lt;/p&gt;&#xA;" OwnerUserId="3772" LastEditorUserId="3772" LastEditDate="2016-06-06T02:42:37.890" LastActivityDate="2016-06-06T02:42:37.890" Title="How can I organize Pantheon Photo Manager by folders?" Tags="|photos|" AnswerCount="0" CommentCount="0" ClosedDate="2017-04-14T00:31:38.470" ContentLicense="CC BY-SA 3.0" />
  <row Id="6651" PostTypeId="1" CreationDate="2016-06-06T07:31:40.407" Score="1" ViewCount="214" Body="&lt;p&gt;I use geary 0.10 - working correctly - for 4 accounts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after update on Geary 0.11 - working only the first account - others are visible, indicate a new messages, but can't open it, read, resend or create new&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for now, I downgrade on Geary 0.10&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have You got any idea for solution?&#xA;Thank You, Sonny&lt;/p&gt;&#xA;" OwnerUserId="4884" LastEditorUserId="596" LastEditDate="2016-09-25T15:39:38.800" LastActivityDate="2017-03-22T10:12:41.957" Title="Geary 0.11 doesn't work" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6652" PostTypeId="1" CreationDate="2016-06-06T10:17:28.083" Score="1" ViewCount="401" Body="&lt;p&gt;I am getting the following error message when I try to report a problem via the about window in Files (same with other default apps)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;The problem cannot be reported:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not an official elementary package. Please remove any third party package and try again.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What does this mean?  If I don't have the official package, how did it become unofficial?&lt;/p&gt;&#xA;" OwnerUserId="5241" LastActivityDate="2016-10-19T00:01:46.737" Title="not an official elementary package" Tags="|desktop|" AnswerCount="2" CommentCount="0" ClosedDate="2016-12-08T06:54:04.147" ContentLicense="CC BY-SA 3.0" />
  <row Id="6653" PostTypeId="1" CreationDate="2016-06-06T10:44:41.850" Score="2" ViewCount="168" Body="&lt;p&gt;I want to install some opentype .otf fonts, that worked perfectly on my former ubuntu os. I copied them to &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/usr/share/fonts/opentype/&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;like described in previous questions, which seems to work – they are displayed in fontlist in e.g. libre office now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the typefaces are not displayed correctly, they either change to a default font or show only placeholder glyphs. &#xA;I've already tried installing libotf-bin&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;apt-get install libotf-bin&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;but still they cannot be displayed. somehow elementary doesn't know the file format and doesn't support .otf ?? can anyone help me out on this one?&#xA;thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Elementary OS 0.3.2 Freya (64bit)&lt;/p&gt;&#xA;" OwnerUserId="5242" LastActivityDate="2016-06-09T21:04:28.207" Title="Opentype fonts don't work on 0.3.2 Freya" Tags="|release-freya|fonts|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6654" PostTypeId="1" CreationDate="2016-06-06T15:09:39.030" Score="0" ViewCount="177" Body="&lt;p&gt;I have two monitor one of them is few older and needed the NVIDIA GeForce GT 610 graphics card driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is their &lt;a href=&quot;http://www.nvidia.com/download/driverResults.aspx/103306/en-us&quot; rel=&quot;nofollow&quot;&gt;latest driver software&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when i try to install i get this error messages:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;http://pastebin.com/pSZMwvgu&quot; rel=&quot;nofollow&quot;&gt;nvidia-installer.log&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How can i install this driver? or is it available via PPA? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your time.&lt;/p&gt;&#xA;" OwnerUserId="5244" LastEditorUserId="5244" LastEditDate="2016-06-06T18:46:12.060" LastActivityDate="2016-06-09T09:02:23.470" Title="Installing NVIDIA 361.45.11?" Tags="|graphic-drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6655" PostTypeId="2" ParentId="6652" CreationDate="2016-06-06T19:14:30.250" Score="1" Body="&lt;p&gt;check your software ppas with &quot;Software and Updates&quot; utility and make sure you have all the ubuntu ppa's and Elementary's launchpad ppas (aka stable package).&lt;/p&gt;&#xA;" OwnerUserId="5233" LastActivityDate="2016-06-06T19:14:30.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6656" PostTypeId="2" ParentId="5632" CreationDate="2016-06-06T21:32:35.510" Score="2" Body="&lt;p&gt;Solved my problem by going to &lt;a href=&quot;https://www.reddit.com/r/PopCornTime/&quot; rel=&quot;nofollow&quot;&gt;popcorn-time's reddit&lt;/a&gt; and checking the sidebar for the official version: &lt;a href=&quot;https://www.popcorntime.sh&quot; rel=&quot;nofollow&quot;&gt;popcorntime.sh&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded it, ran it and it worked first try.&lt;/p&gt;&#xA;" OwnerUserId="5223" LastActivityDate="2016-06-06T21:32:35.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6657" PostTypeId="1" AcceptedAnswerId="6658" CreationDate="2016-06-06T23:30:16.873" Score="5" ViewCount="572" Body="&lt;p&gt;I would like to rename a number of files in one operation, but it does not appear that pantheon-files supports this feature.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorDisplayName="user170" LastEditDate="2017-03-02T10:11:31.860" LastActivityDate="2017-03-04T22:15:45.673" Title="Pantheon-files support for bulk or batch renaming?" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6658" PostTypeId="2" ParentId="6657" CreationDate="2016-06-06T23:30:16.873" Score="4" Body="&lt;p&gt;Pantheon-files does not currently support bulk renaming, however &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1439991&quot; rel=&quot;nofollow&quot;&gt;this feature is on the wishlist&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-06T23:30:16.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6659" PostTypeId="2" ParentId="6648" CreationDate="2016-06-07T01:14:51.693" Score="1" Body="&lt;p&gt;Turns out it was a bad package, the reason it happened when I tried installing another package was the other package was included and therefore broke.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Package in question is the GTK Paper theme).&lt;/p&gt;&#xA;" OwnerUserId="5230" LastActivityDate="2016-06-07T01:14:51.693" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6660" PostTypeId="1" AcceptedAnswerId="6682" CreationDate="2016-06-07T03:06:17.563" Score="0" ViewCount="85" Body="&lt;p&gt;How to make this screen normal. Please check this image and help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/88l7B.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/88l7B.jpg&quot; alt=&quot;Desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5247" LastActivityDate="2016-06-13T11:20:58.403" Title="Desktop shows in frame on screen" Tags="|display|desktop|show-desktop|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6661" PostTypeId="1" CreationDate="2016-06-07T05:51:42.183" Score="0" ViewCount="1541" Body="&lt;p&gt;I'm a very new, basic Linux user and was trying to get my Xbox One controller to work with my pc and Elementary OS setup. I want to specifically use it for game emulation (RetroArch). I can't seem to get the device to communicate with my pc using Elementary. I try both plugging into usb port, and bluetooth and neither seem to work. I've tried downloading xdrv through the terminal but it doesn't seem to want to download. I think I may be missing the requisite drivers for this to happen, but maybe it's something else? Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5248" LastActivityDate="2023-12-09T17:02:30.350" Title="Xbox One Controller Compatibility" Tags="|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6662" PostTypeId="1" CreationDate="2016-06-07T06:24:31.490" Score="0" ViewCount="194" Body="&lt;p&gt;I install elementary os on Lenovo Ideapad Y700.&#xA;the laptop run before with win 10 and every thing work fine.&#xA;after installing elementary os the system doesn't identify the WiFi but its let me to connect with wire connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;whats i'm doing wrong or how can i define my wifi?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used elementary os on old lenvovo laptop and it's identify the WiFi automatically with no problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;the spec of the computer:&lt;/strong&gt;&#xA;Processor---------6th Generation Intel® Quad-Core i7 Processor&#xA;Discrete Graphics---------NVIDIA® GTX 960M 4 GB GDDR5&#xA;Memory---------16 GB DDR4&#xA;Webcam---------HD 720p, 2 x Internal Digital Array Microphone, or Intel 3D RealSense Camera (Optional)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Storage --------- 128 ssd with 1 TB HDD &#xA;Audio--------- 2 x 2W JBL Speakers with Chamber + 3.0 W Subwoofer and Dolby® Home Theater™&#xA;Battery ---------  4 Cell 60 WHr&#xA;Keyboard--------- Red LED Backlit with 2 Level Brightness Control&#xA;Display --------- Frameless Full HD (1920 x 1080) or Ultra HD (3840 x 2160) 16:9 IPS Anti-Glare&#xA;Dimensions  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(inches) : 15.23&quot; x 10.90&quot; x 1.02&quot;&#xA;(mm) : 387 x 277 x 25.95&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ODD--------- Optional External USB 2.0 DVD/BD Tray-In&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WLAN--------- LAN 1000 M, Up to WiFi 2 x 2 a/c + Bluetooth® 4.0&lt;/strong&gt;&#xA;Ports--------- 2 x USB 3.0, 1 x USB 2.0 + Always-on, DC-in, 2-in-1 Audio Combo Jack, 1 x HDMI, 1 x 4-in-1 Media Card Reader (SD, SDHC, SDXC, MMC)  &lt;/p&gt;&#xA;" OwnerUserId="3942" LastActivityDate="2016-08-07T07:47:29.683" Title="Identify the WiFi" Tags="|release-freya|system-installation|wifi|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6663" PostTypeId="2" ParentId="5585" CreationDate="2016-06-07T07:19:29.257" Score="2" Body="&lt;p&gt;With reference to &lt;a href=&quot;http://www.webupd8.org/2015/01/quick-file-previewer-gloobus-preview.html&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; article use &lt;a href=&quot;https://launchpad.net/~nilarimogard/+archive/ubuntu/webupd8&quot; rel=&quot;nofollow&quot;&gt;webupd8&lt;/a&gt; PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt update&#xA;sudo apt install gloobus-preview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2708" LastEditorUserId="26" LastEditDate="2016-09-24T20:50:06.293" LastActivityDate="2016-09-24T20:50:06.293" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6664" PostTypeId="1" AcceptedAnswerId="6669" CreationDate="2016-06-07T09:19:00.247" Score="1" ViewCount="757" Body="&lt;p&gt;I'm trying to install the paper theme for my elementary OS freya but it says that it needs gtk 3.16, i only have 3.14. How do i upgrade the gtk?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, i've already tried to install it but it seems broken. I think it's because of the gtk. Just a guess though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the screenshot: &lt;a href=&quot;https://i.stack.imgur.com/fgWTc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fgWTc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5249" LastEditorUserId="308" LastEditDate="2018-08-07T17:10:01.820" LastActivityDate="2018-08-07T17:10:01.820" Title="GTK 3.16 or up for elementary OS Freya" Tags="|themes|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6665" PostTypeId="1" CreationDate="2016-06-07T09:33:05.187" Score="0" ViewCount="7298" Body="&lt;p&gt;I pretty much just want to ask this exact question:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/183525/how-to-set-wifi-driver-settings-to-prefer-5-ghz-channel-above-2-4-ghz&quot;&gt;askubuntu forum&lt;/a&gt; only for elementary (freya). I cant figure out how to do it with the normal network settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As the solution in the askubuntu forum proposed, I was searching for an option called &lt;em&gt;Band&lt;/em&gt;. However I cant find any options in the Network settings, that adjust the frequency, as I wish. Or I just cant recognize it as one. &lt;/p&gt;&#xA;" OwnerUserId="3957" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2018-01-26T23:17:12.050" Title="How to set wifi driver settings to prefer 5 GHz channel over 2.4 GHz" Tags="|wifi|networking|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6667" PostTypeId="2" ParentId="6662" CreationDate="2016-06-07T10:13:06.887" Score="1" Body="&lt;p&gt;The elementary kernel doesn't have the correct (new) drivers for Skylake (6th gen. ix) machines. On the other hand the newest kernels gave me other glitches / incompatibilities with elementary. &#xA;Kernel 4.2.8 and following ckt versions do the job for me.&#xA;Intel graphics then still also need some tweaking:&#xA;You should add &lt;strong&gt;i915.preliminary_hw_support=1&lt;/strong&gt; to grub to get hardware accelleration from the Intel GPU as well.&#xA;&lt;a href=&quot;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=intel-skl-prelim-support&quot; rel=&quot;nofollow&quot;&gt;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=intel-skl-prelim-support&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Google &quot;elementary OS Skylake&quot; for all info on the broader subject.&#xA;I run elementary OS on an Intel NUC6i3 (also Skylake) and also had to work through these issues. Everything runs super stable and snappy fast now.&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2016-06-07T10:13:06.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6668" PostTypeId="2" ParentId="6662" CreationDate="2016-06-07T14:16:00.517" Score="0" Body="&lt;p&gt;I have similar problem, every time I turn on elementary OS (or any other Linux distribution) I can't connect to Wifi, but when I put it on sleep then turn it on again, it connects to Wifi then. Try first that, and if it doesn't work, try Alex's method.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-06-07T14:16:00.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6669" PostTypeId="2" ParentId="6664" CreationDate="2016-06-07T23:32:57.410" Score="0" Body="&lt;p&gt;you can't upgrade the gtk version of freya, the granite framework in freya only works with gtk 3.14, so if you upgrade gtk, all the system is going to break very bad :P&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-07T23:32:57.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6670" PostTypeId="2" ParentId="6654" CreationDate="2016-06-07T23:41:44.373" Score="1" Body="&lt;p&gt;try to use the official PPA for the latest drivers of nvidia, you can see how to use it in this page&#xA;&lt;a href=&quot;http://www.webupd8.org/2015/08/new-official-proprietary-gpu-drivers.html&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2015/08/new-official-proprietary-gpu-drivers.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but you should know that is a external PPA, so read very carefuli what are you doing&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-07T23:41:44.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6671" PostTypeId="2" ParentId="6662" CreationDate="2016-06-08T06:33:35.383" Score="0" Body="&lt;p&gt;Thank for the answers.&#xA;I use this solution for my problem and it's work well &lt;a href=&quot;http://www.everydaylinuxuser.com/2016/05/fixing-linux-mint-wireless-issues-on.html&quot; rel=&quot;nofollow&quot;&gt;http://www.everydaylinuxuser.com/2016/05/fixing-linux-mint-wireless-issues-on.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have anther issues with my graphic card and some reboot problems like after reboot I get black screen or after update when i press restart the system freeze&lt;/p&gt;&#xA;" OwnerUserId="3942" LastActivityDate="2016-06-08T06:33:35.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6672" PostTypeId="2" ParentId="2461" CreationDate="2016-06-08T12:32:31.113" Score="0" Body="&lt;p&gt;even I had the problem mentioned above. However the solution mentioned above did not work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This answer, however, did solve the issue : &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/2988/5253&quot;&gt;https://elementaryos.stackexchange.com/a/2988/5253&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To quote :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you have, by any chance, tried to install &lt;a href=&quot;https://code.launchpad.net/~elementary-apps/synapse-project/indicator-search&quot; rel=&quot;nofollow noreferrer&quot;&gt;Synapse /&#xA;  indicator-search&lt;/a&gt; then this could be the reason as some versions are&#xA;  known to break WingPanel.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;You should be able to uninstall it by typing (in Terminal):&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo apt-get remove indicator-synapse&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Restart and check if it has any effect.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If yes and you added a PPA just for this, you should also &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/371/how-do-i-remove-a-ppa&quot;&gt;remove the&#xA;  PPA&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5253" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-06-08T12:32:31.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6675" PostTypeId="2" ParentId="6651" CreationDate="2016-06-08T16:15:48.607" Score="1" Body="&lt;p&gt;you upgraded the version geary with a PPA right?&#xA;If that is the case you just need install ppa-purge, is an utility that remove a ppa and revert the changes that the ppa made to the system&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;first, install ppa-purge with this command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install ppa-purge&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;after, use ppa-purge to remove the ppa of geary 0.11 (I'm using the PPA that is shown in all the webs with the note of geary update for this example, please check if is the same that you used), this is the command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ppa-purge ppa:geary-team/releases&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;just wait until the process end and your geary  would be the default of elementary.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastEditorUserId="26" LastEditDate="2016-09-25T09:24:04.230" LastActivityDate="2016-09-25T09:24:04.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6676" PostTypeId="1" CreationDate="2016-06-08T16:17:58.040" Score="0" ViewCount="12892" Body="&lt;p&gt;So I want to use only vanilla gnome with Elementary OS as I am more at ease working with that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However,(I am using Freya) I cannot seem to find a solution for implementing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How should I replace Pantheon with Gnome.&lt;/p&gt;&#xA;" OwnerUserId="5253" LastActivityDate="2021-09-05T11:54:49.737" Title="Use only Gnome on Elementary OS" Tags="|pantheon|gnome|" AnswerCount="2" CommentCount="1" ClosedDate="2021-09-08T19:05:10.097" ContentLicense="CC BY-SA 3.0" />
  <row Id="6677" PostTypeId="2" ParentId="6676" CreationDate="2016-06-08T16:51:48.363" Score="2" Body="&lt;p&gt;why not use &lt;a href=&quot;https://ubuntugnome.org/&quot; rel=&quot;nofollow&quot;&gt;ubuntu gnome&lt;/a&gt; directly than elementary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that you can't use the latest version of gnome and keep pantheon and other elementary apps, this is because the gtk version used in both desktops are diferents, pantheon uses gtk 3.14 and the latest version of gnome use gtk 3.20, so if you install one the other broke.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way if you still want to try to install gnome just run this two commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-shell&#xA;sudo apt-get install ubuntu-gnome-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will install gnome 3.14 to your pc.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastEditorUserId="4710" LastEditDate="2016-06-08T17:05:24.457" LastActivityDate="2016-06-08T17:05:24.457" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="6678" PostTypeId="1" CreationDate="2016-06-08T20:53:44.113" Score="1" ViewCount="86" Body="&lt;p&gt;I have a laptop and quite frequently I connect and disconnect external monitor. The monitor always has wrong configuration (main display is on laptop and display placement is wrong) on connection, so I have to set it up manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to set configuration for the display, so I wouldn't set it up manually everytime on connection?&lt;/p&gt;&#xA;" OwnerUserId="1192" LastActivityDate="2016-06-08T20:53:44.113" Title="Set up configuration for external display" Tags="|release-freya|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6679" PostTypeId="1" AcceptedAnswerId="6680" CreationDate="2016-06-08T21:20:43.823" Score="0" ViewCount="111" Body="&lt;p&gt;Since the dreamdev repository went away several months ago the application must be built from source. How can users do this?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="26" LastEditDate="2016-10-02T15:38:35.827" LastActivityDate="2016-10-02T15:38:35.827" Title="How can I build eRadio from source?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6680" PostTypeId="2" ParentId="6679" CreationDate="2016-06-08T21:20:43.823" Score="1" Body="&lt;p&gt;&lt;code&gt;cd /usr/local/src; git clone https://github.com/DreamDevel/eRadio.git&#xA;cd eRadio/tools; . dev-shell; ./install-deps&#xA;mkdir ../build; build; cd ../build; sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-08T21:20:43.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6682" PostTypeId="2" ParentId="6660" CreationDate="2016-06-09T05:40:31.633" Score="1" Body="&lt;p&gt;This problem can be caused by installing Nemo file manager. If you have Nemo installed and don't want it, remove it using the Software Center or by running &lt;code&gt;sudo apt-get remove nemo&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="308" LastEditDate="2016-06-13T05:10:22.640" LastActivityDate="2016-06-13T05:10:22.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6684" PostTypeId="2" ParentId="6654" CreationDate="2016-06-09T09:02:23.470" Score="1" Body="&lt;p&gt;Firstly, you need to be aware that if you upgrade your graphics driver, you won't be able to run steam, in case you're wanting to upgrade it for gaming purposes. If this is the case, just check that you have the latest supported drivers in settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If however you are installing updated graphics driver for other reasons, &lt;a href=&quot;https://elementaryforums.com/index.php?threads/howto-install-latest-nvidia-driver-on-linux-without-getting-black-screen.7/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; is a nice in depth tutorial on upgrading your graphics driver to the latest version. You should also be aware that once you've installed the latest version, there is no easy way back to the supported versions, so make sure you need it before doing it.&lt;/p&gt;&#xA;" OwnerUserId="4842" LastActivityDate="2016-06-09T09:02:23.470" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="6685" PostTypeId="1" AcceptedAnswerId="6704" CreationDate="2016-06-09T15:02:17.013" Score="7" ViewCount="15055" Body="&lt;p&gt;I've reinstalled my laptop yesterday and decided to give Elementary another shot. Everything's working great and I'm loving it but now I have a big issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I connected the laptop via HDMI to an external monitor and I saw both just fine. I then made the external HDMI monitor the favourite/main one so the laptop one would turn off. Now &lt;strong&gt;I can't turn the laptop one back on&lt;/strong&gt;!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I reboot the system with the HDMI cable not attached it works just fine but if I connect it it still displays the external monitor only. From the system settings I see the laptop monitor but pressing the little switch makes it move where it should be &quot;On&quot; but it immediately goes back to off like if I couldn't select my laptop monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I pressed the F5/F6/F7 keys on this ACER(E1-570G) and now if I have the HDMI cable attached the laptop monitor keeps flashing withot showing more than the cursor, if I de-attach it the laptop one works but obviously I got no external monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's going on? How can I go back to have the laptop monitor AND the external one working together again?&lt;/p&gt;&#xA;" OwnerUserId="521" LastEditorDisplayName="user170" LastEditDate="2017-03-03T16:27:45.330" LastActivityDate="2020-01-03T08:02:27.627" Title="Laptop + HDMI external monitor issue?" Tags="|display|hdmi|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6686" PostTypeId="1" CreationDate="2016-06-09T15:06:18.707" Score="1" ViewCount="31" Body="&lt;p&gt;editing my hosts.allow to allow and deny access to special services.&#xA;At last restart service without rebooting the system.&#xA;Try &lt;strong&gt;&lt;em&gt;killall -HUP inetd&lt;/em&gt;&lt;/strong&gt; or &lt;strong&gt;&lt;em&gt;killall -HUP xinetd&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;inetd: no procces found&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;xinetd: no procces found&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;makes me stump. A system without running inetd?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to restart the NIC's without rebooting system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System is actual elementary OS 0.3.2 Freya &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Christian&lt;/p&gt;&#xA;" OwnerUserId="5266" LastActivityDate="2016-09-08T07:26:49.637" Title="using tcp wrappers" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6687" PostTypeId="2" ParentId="6653" CreationDate="2016-06-09T17:57:32.223" Score="1" Body="&lt;p&gt;some times the permissions in the files are wrong, if you install the font in &quot;/usr/share/fonts/&quot; you need to check the file permission to ensure that all the users can read the font file refresh the font cache and that's all, this is only when you want to install a font that can be used by all the users in the pc, but if you want the font only for your user just open.otf file whit the font viewer and select the option install.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-09T17:57:32.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6689" PostTypeId="2" ParentId="6653" CreationDate="2016-06-09T21:04:28.207" Score="1" Body="&lt;p&gt;&lt;strong&gt;For personal use&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TTF files in ~/.local/share/fonts/truetype (old way was ~/.fonts/truetype)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OTF files in ~/.local/share/fonts/type1 (old way was ~/.fonts/type1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For system wide use&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TTF files in /usr/local/share/fonts/truetype&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OTF files in /usr/local/share/fonts/type1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then sudo fc-cache and you should see the fonts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative way is to place fonts generally in ~/.local/share/fonts/ (old way was ~/.fonts/).&lt;/p&gt;&#xA;" OwnerUserId="5267" LastActivityDate="2016-06-09T21:04:28.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6690" PostTypeId="1" CreationDate="2016-06-10T00:57:14.647" Score="-1" ViewCount="47" Body="&lt;p&gt;i have a laptop , and i have a eksternal hard disk , and my frien borrow my hardisk to backup something's file .. i dot now what him copied file .. After that, my delete files that have been her backup because he had completed his affair with files that are on my hard disk, hence my delete..after deleted , and how many files deleted in file .Trash -1000 .. and wanted me to delete again , to be cleaner . why can not be removed and writing &quot;can not moving files to trash &quot; .. and all files are erased as it was all . how his solution in order to remove the file without formatting the hard disk ? Sorry if my language is less clear, because I have not yet fluent in English..&lt;/p&gt;&#xA;" OwnerUserId="5271" LastActivityDate="2016-06-22T14:33:33.630" Title="file is corrupt" Tags="|files|elementary-website|filesystem|file-management|pantheon-files|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-27T21:27:31.893" ContentLicense="CC BY-SA 3.0" />
  <row Id="6691" PostTypeId="2" ParentId="6660" CreationDate="2016-06-10T03:40:47.920" Score="1" Body="&lt;p&gt;This problem was caused by the &quot;Enable Desktop Icons&quot; feature in the Tweak tool. Disabling that feature restores the desktop to how it should be.&lt;/p&gt;&#xA;" OwnerUserId="5247" LastEditorUserId="308" LastEditDate="2016-06-13T11:20:58.403" LastActivityDate="2016-06-13T11:20:58.403" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6692" PostTypeId="2" ParentId="6686" CreationDate="2016-06-10T05:37:50.960" Score="1" Body="&lt;p&gt;To restart the NIC run &lt;code&gt;ifconfig&lt;/code&gt;. You should see something like the following&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;eth0      Link encap:Ethernet  HWaddr **:**:**:**:**:**  &#xA;          inet addr:192.168.1.3  Bcast:192.168.1.3  Mask:255.255.255.255&#xA;          inet6 addr: fe80::8634:97ff:fe89:f64e/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:40937 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:28609 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:46371176 (46.3 MB)  TX bytes:4144187 (4.1 MB)&#xA;&#xA;lo        Link encap:Local Loopback  &#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:1372 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:1372 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:0 &#xA;          RX bytes:246769 (246.7 KB)  TX bytes:246769 (246.7 KB)&#xA;&#xA;virbr0    Link encap:Ethernet  HWaddr **:**:**:**:**:** &#xA;          inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0&#xA;          UP BROADCAST MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:0 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:0 &#xA;          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the example I will be using &lt;strong&gt;eth0&lt;/strong&gt; but yours could be different.If you use WiFi it will be something like &lt;strong&gt;wlan0&lt;/strong&gt;. Now run the following to restart your NIC.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;sudo ifconfig &lt;b&gt;eth0&lt;/b&gt; down &amp;&amp; sudo ifconfig &lt;b&gt;eth0&lt;/b&gt; up&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace &lt;strong&gt;eth0&lt;/strong&gt; (in bold) with your NIC.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-10T05:37:50.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6693" PostTypeId="1" CreationDate="2016-06-10T08:37:47.243" Score="1" ViewCount="982" Body="&lt;p&gt;Having some trouble booting up my computer this morning - can anyone help out with this? I can't start up at all in either normal or recovery mode and I don't know what (or how to find out what) the problem is. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had trouble installing initially, and when I restarted after updating I ended up on a busy box screen. So I tried to install again and it seemed to be running ok. I originally installed over Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a previous question someone told me I needed to delete all the partitions and do a fresh install but I don't know how to do that, so it could possibly be part of the problem. But it would be really appreciated if someone who knows more about it could direct me, I can't afford to buy a new computer to replace it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6K9VK.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6K9VK.jpg&quot; alt=&quot;boot screen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5235" LastActivityDate="2016-09-08T12:27:17.540" Title="I/O error, dev sda, getting busy box when booting up." Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6694" PostTypeId="2" ParentId="6693" CreationDate="2016-06-10T10:52:04.307" Score="1" Body="&lt;p&gt;IO errors indicate a problem reading a sector from the disk (or SSD).Did you shutdown your system incorrectly while it was running ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try running fsck by running the following command from the BusyBox prompt &lt;code&gt;/sbin/fsck /dev/sdaX&lt;/code&gt; (replacing &lt;strong&gt;X&lt;/strong&gt; with the number of the elementary OS partition).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't fix it just leave a comment on your post showing me the error.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;IO errors can also be caused by a failing disk (SSDs fail very rarely)&#xA;  and if it is a failing disk back up your data and get a SSD (although&#xA;  I still have a HDD) and a second back up HDD and store your data on&#xA;  that&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-10T10:52:04.307" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6696" PostTypeId="1" CreationDate="2016-06-10T22:17:30.593" Score="1" ViewCount="485" Body="&lt;p&gt;I'm using elementary OS since some months and I really like it!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is very simple to use and is great to view. Is very fast too, except when I use Google Chrome. This happen especially when I watch something in streaming like youtube or other stream site.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to remove flash player from the system, and disable it in Chrome. I've checked for graphics drivers, but all is ok. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what would be the problem?&lt;/p&gt;&#xA;" OwnerUserId="5276" LastEditorUserId="26" LastEditDate="2016-09-25T17:10:34.643" LastActivityDate="2016-09-25T17:10:34.643" Title="elementary go slow when Google Chrome is open" Tags="|google-chrome|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="6697" PostTypeId="1" AcceptedAnswerId="6698" CreationDate="2016-06-11T00:46:33.677" Score="0" ViewCount="284" Body="&lt;p&gt;I needed to move the /home directory on the boot/root drive to another disk to free up space. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This meant replicating the data to the other drive, then mounting the encrypted boot drive offline so I could clean out the /home dir.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Booting into single user mode to perform this task isn't an option because the root '/' dir is mounted read-only and remounting it read-write is not allowed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What to do?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-08-10T02:49:57.320" LastActivityDate="2016-08-10T02:49:57.320" Title="How do I mount encrypted root LVM volumes for editing or recovery?" Tags="|boot|filesystem|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6698" PostTypeId="2" ParentId="6697" CreationDate="2016-06-11T00:46:33.677" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;Boot using separate media such as the Elementary OS installer's&#xA;&quot;Try Elementary OS&quot; option&lt;/li&gt;&#xA;&lt;li&gt;Unlock the root partition: &lt;code&gt;cryptsetup luksOpen /dev/sda5 root_crypt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Verify the LVM group name - it should be 'elementary-vg': &lt;code&gt;vgscan&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Activate the volume: &lt;code&gt;vgchange -ay elementary-vg&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Mount the decrypted, activated LVM volume: &lt;code&gt;mount /dev/mapper/elementary--vg-root /mnt/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Work with files as needed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-11T00:46:33.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6699" PostTypeId="1" AcceptedAnswerId="6700" CreationDate="2016-06-11T05:05:29.567" Score="1" ViewCount="110" Body="&lt;p&gt;What does disconnecting from a connection do vs disabling networking?&lt;/p&gt;&#xA;" OwnerUserId="5278" LastActivityDate="2016-06-11T05:44:36.060" Title="Disconnect vs Disable Networking?" Tags="|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6700" PostTypeId="2" ParentId="6699" CreationDate="2016-06-11T05:44:36.060" Score="1" Body="&lt;p&gt;Disabling networking stops the network manager which is responsible for connecting to WiFi and using Ethernet while disconnecting just disconnects from the internet. You don't need to disable networking unless you have changed configuration or something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if you haven't changed any networking settings they should do the same thing&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-11T05:44:36.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6701" PostTypeId="1" AcceptedAnswerId="6730" CreationDate="2016-06-11T06:27:40.790" Score="2" ViewCount="956" Body="&lt;p&gt;I get the following error message whenever I open my terminal:     &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: /home/ajith/.bashrc: line 168: syntax error near unexpected token `-r'&#xA;bash: /home/ajith/.bashrc: line 168: `esac[ -r /home/ajith/.byobu/prompt ] &amp;amp;&amp;amp; . /home/ajith/.byobu/prompt   #byobu-prompt#'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: Here's my .bashrc file :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.bashrc: executed by bash(1) for non-login shells.&#xA;# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)&#xA;# for examples&#xA;# We use preexec and precmd hook functions for Bash&#xA;# If you have anything that's using the Debug Trap or PROMPT_COMMAND &#xA;# change it to use preexec or precmd&#xA;# See also https://github.com/rcaloras/bash-preexec&#xA;&#xA;# If not running interactively, don't do anything&#xA;case $- in&#xA;    *i*) ;;&#xA;      *) return;;&#xA;esac&#xA;&#xA;# don't put duplicate lines or lines starting with space in the history.&#xA;# See bash(1) for more options&#xA;HISTCONTROL=ignoreboth&#xA;&#xA;# append to the history file, don't overwrite it&#xA;shopt -s histappend&#xA;&#xA;# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)&#xA;HISTSIZE=1000&#xA;HISTFILESIZE=2000&#xA;&#xA;# check the window size after each command and, if necessary,&#xA;# update the values of LINES and COLUMNS.&#xA;shopt -s checkwinsize&#xA;&#xA;# If set, the pattern &quot;**&quot; used in a pathname expansion context will&#xA;# match all files and zero or more directories and subdirectories.&#xA;#shopt -s globstar&#xA;&#xA;# make less more friendly for non-text input files, see lesspipe(1)&#xA;[ -x /usr/bin/lesspipe ] &amp;amp;&amp;amp; eval &quot;$(SHELL=/bin/sh lesspipe)&quot;&#xA;&#xA;# set variable identifying the chroot you work in (used in the prompt below)&#xA;if [ -z &quot;${debian_chroot:-}&quot; ] &amp;amp;&amp;amp; [ -r /etc/debian_chroot ]; then&#xA;    debian_chroot=$(cat /etc/debian_chroot)&#xA;fi&#xA;&#xA;# set a fancy prompt (non-color, unless we know we &quot;want&quot; color)&#xA;case &quot;$TERM&quot; in&#xA;    xterm-color) color_prompt=yes;;&#xA;esac&#xA;&#xA;# uncomment for a colored prompt, if the terminal has the capability; turned&#xA;# off by default to not distract the user: the focus in a terminal window&#xA;# should be on the output of commands, not on the prompt&#xA;#force_color_prompt=yes&#xA;&#xA;if [ -n &quot;$force_color_prompt&quot; ]; then&#xA;    if [ -x /usr/bin/tput ] &amp;amp;&amp;amp; tput setaf 1 &amp;gt;&amp;amp;/dev/null; then&#xA;    # We have color support; assume it's compliant with Ecma-48&#xA;    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such&#xA;    # a case would tend to support setf rather than setaf.)&#xA;    color_prompt=yes&#xA;    else&#xA;    color_prompt=&#xA;    fi&#xA;fi&#xA;&#xA;if [ &quot;$color_prompt&quot; = yes ]; then&#xA;    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '&#xA;else&#xA;    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '&#xA;fi&#xA;unset color_prompt force_color_prompt&#xA;&#xA;# enable color support of ls and also add handy aliases&#xA;if [ -x /usr/bin/dircolors ]; then&#xA;    test -r ~/.dircolors &amp;amp;&amp;amp; eval &quot;$(dircolors -b ~/.dircolors)&quot; || eval &quot;$(dircolors -b)&quot;&#xA;    alias ls='ls --color=auto'&#xA;    #alias dir='dir --color=auto'&#xA;    #alias vdir='vdir --color=auto'&#xA;&#xA;    alias grep='grep --color=auto'&#xA;    alias fgrep='fgrep --color=auto'&#xA;    alias egrep='egrep --color=auto'&#xA;fi&#xA;&#xA;# some more ls aliases&#xA;alias ll='ls -alF'&#xA;alias la='ls -A'&#xA;alias l='ls -CF'&#xA;&#xA;# Add an &quot;alert&quot; alias for long running commands.  Use like so:&#xA;#   sleep 10; alert&#xA;alias alert='notify-send --urgency=low -i &quot;$([ $? = 0 ] &amp;amp;&amp;amp; echo terminal || echo error)&quot; &quot;$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&amp;amp;|]\s*alert$//'\'')&quot;'&#xA;&#xA;# Alias definitions.&#xA;# You may want to put all your additions into a separate file like&#xA;# ~/.bash_aliases, instead of adding them here directly.&#xA;# See /usr/share/doc/bash-doc/examples in the bash-doc package.&#xA;&#xA;if [ -f ~/.bash_aliases ]; then&#xA;    . ~/.bash_aliases&#xA;fi&#xA;&#xA;# enable programmable completion features (you don't need to enable&#xA;# this, if it's already enabled in /etc/bash.bashrc and /etc/profile&#xA;# sources /etc/bash.bashrc).&#xA;if ! shopt -oq posix; then&#xA;  if [ -f /usr/share/bash-completion/bash_completion ]; then&#xA;    . /usr/share/bash-completion/bash_completion&#xA;  elif [ -f /etc/bash_completion ]; then&#xA;    . /etc/bash_completion&#xA;  fi&#xA;fi&#xA;&#xA;# If this is an xterm set more declarative titles &#xA;# &quot;dir: last_cmd&quot; and &quot;actual_cmd&quot; during execution&#xA;# If you want to exclude a cmd from being printed see line 156&#xA;case &quot;$TERM&quot; in&#xA;xterm*|rxvt*)&#xA;    PS1=&quot;\[\e]0;${debian_chroot:+($debian_chroot)}\$(print_title)\a\]$PS1&quot;&#xA;    __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;    print_title () &#xA;    {&#xA;        __el_FIRSTPART=&quot;&quot;&#xA;        __el_SECONDPART=&quot;&quot;&#xA;        if [ &quot;$PWD&quot; == &quot;$HOME&quot; ]; then&#xA;            __el_FIRSTPART=$(gettext --domain=&quot;pantheon-files&quot; &quot;Home&quot;)&#xA;        else&#xA;            if [ &quot;$PWD&quot; == &quot;/&quot; ]; then&#xA;                __el_FIRSTPART=&quot;/&quot;&#xA;            else&#xA;                __el_FIRSTPART=&quot;${PWD##*/}&quot;&#xA;            fi&#xA;        fi&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == &quot;&quot; ]]; then&#xA;            echo &quot;$__el_FIRSTPART&quot;&#xA;            return&#xA;        fi&#xA;        #trim the command to the first segment and strip sudo&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == sudo* ]]; then&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND:5}&quot;&#xA;            __el_SECONDPART=&quot;${__el_SECONDPART%% *}&quot;&#xA;        else&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND%% *}&quot;&#xA;        fi &#xA;        printf &quot;%s: %s&quot; &quot;$__el_FIRSTPART&quot; &quot;$__el_SECONDPART&quot;&#xA;    }&#xA;    put_title()&#xA;    {&#xA;        __el_LAST_EXECUTED_COMMAND=&quot;${BASH_COMMAND}&quot;&#xA;        printf &quot;\033]0;%s\007&quot; &quot;$1&quot;&#xA;    }&#xA;&#xA;    # Show the currently running command in the terminal title:&#xA;    # http://www.davidpashley.com/articles/xterm-titles-with-bash.html&#xA;    update_tab_command()&#xA;    {&#xA;        # catch blacklisted commands and nested escapes&#xA;        case &quot;$BASH_COMMAND&quot; in &#xA;            *\033]0*|update_*|echo*|printf*|clear*|cd*)&#xA;            __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;                ;;&#xA;            *)&#xA;            put_title &quot;${BASH_COMMAND}&quot;&#xA;            ;;&#xA;        esac&#xA;    }&#xA;    preexec_functions+=(update_tab_command)&#xA;    ;;&#xA;*)&#xA;    ;;&#xA;esac[ -r /home/ajith/.byobu/prompt ] &amp;amp;&amp;amp; . /home/ajith/.byobu/prompt   #byobu-prompt#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Line having the error :&lt;code&gt;esac[ -r /home/ajith/.byobu/prompt ] &amp;amp;&amp;amp; . /home/ajith/.byobu/prompt   #byobu-prompt#&lt;/code&gt;&#xA;&lt;/p&gt;&#xA;" OwnerUserId="420" LastEditorUserId="420" LastEditDate="2016-06-12T06:14:03.700" LastActivityDate="2016-06-15T17:38:17.240" Title="bashrc error message on terminal" Tags="|pantheon-terminal|bash|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6702" PostTypeId="1" CreationDate="2016-06-11T06:52:58.263" Score="6" ViewCount="16436" Body="&lt;p&gt;What do I have to type in the terminal to install VMware tools.  I already have it showing up as a cd in the file system.  I am new to Linux systems and operating the terminal.&lt;/p&gt;&#xA;" OwnerUserId="5279" LastActivityDate="2021-08-06T20:07:58.050" Title="VMware tools Installation" Tags="|virtualization|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6704" PostTypeId="2" ParentId="6685" CreationDate="2016-06-11T09:31:49.400" Score="5" Body="&lt;p&gt;I just recreated the problem and was able to fix it by deleting the &lt;code&gt;~/.config/monitors.xml&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that by deleting this file all settings for displays will be lost.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file is in a hidden folder, so to be able to find it you need to make hidden folders visible in the file browser. To do this press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="124" LastEditorUserId="18392" LastEditDate="2020-01-03T08:02:27.627" LastActivityDate="2020-01-03T08:02:27.627" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="6705" PostTypeId="1" CreationDate="2016-06-11T11:52:30.910" Score="4" ViewCount="198" Body="&lt;p&gt;I'm using a clean install of Freya (made about a month ago), and suddenly Software Updater started including all these language packs. &lt;a href=&quot;https://i.stack.imgur.com/BUatH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BUatH.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I had the same issue with a previous install of Freya; it just looks like, after a while, elementary just decides to start installing all these language packs.&lt;/p&gt;&#xA;&lt;p&gt;By the way, the only language I have installed is english (the default one) and I'm using an Italian keyboard, as you can see above.&lt;/p&gt;&#xA;&lt;p&gt;EDIT - after using &lt;code&gt;sudo apt-get remove firefox-locale-*&lt;/code&gt; it &lt;em&gt;seems&lt;/em&gt; for now that elementary has stopped trying to install those packages. Of course, this removes &lt;em&gt;every&lt;/em&gt; language pack in Firefox, which I however didn't have to begin with.&lt;/p&gt;&#xA;" OwnerUserId="4490" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-12-02T08:49:52.177" Title="Why is Software Updater making me install all these FIrefox language packs, even if I don't have Firefox installed?" Tags="|updates|language|firefox|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6706" PostTypeId="1" AcceptedAnswerId="6710" CreationDate="2016-06-11T17:53:31.147" Score="0" ViewCount="195" Body="&lt;p&gt;I have Freya with an encrypted partition and decided to try Veracrypt. It created a partition I'll named like /dev/mnt/veracrypt7. After fiddling with the app, I gave up thinking I'm already well served with my encrypted partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to eject the mounted drive using Freya's file manager, which asked me to force eject, and I accepted. Then I went to veracrypt's windows and saw the volume still there, and could not eject it through it giving a &quot;volume in use&quot; error. The funny thing is, in elementary OS File manager the volume looks ejected, but if I click on it it will mount again without asking for a password. Unable to unmount it, I decided to reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's when the problem began. I can boot to Freya without a problem until the login screen. There, when I put the password and try to enter, the screen goes black for a second, then back to the login screen. I believe this happens because Pantheon could be trying to mount an inexistent partition, closed due to rebooting. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I verify what error is happening during the login? Is there a way to remove any references to the /dev/mnt/veracrypt7 partition so the system cannot try to mount it again?&lt;/p&gt;&#xA;" OwnerUserId="5282" LastEditorUserId="308" LastEditDate="2018-08-07T16:59:24.947" LastActivityDate="2018-08-07T16:59:24.947" Title="Cannot login due to elementary OS thanks to Veracrypt and a possibly invalid volume" Tags="|boot|greeter|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6707" PostTypeId="2" ParentId="6685" CreationDate="2016-06-12T07:37:42.690" Score="3" Body="&lt;p&gt;Press &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; to open a TTY virtual terminal.Then type your username and password and once you have logged in type &lt;code&gt;rm ~/.config/monitors.xml&lt;/code&gt; and press &lt;kbd&gt;ENTER&lt;/kbd&gt; to delete the file @joost said about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to @joost for telling the file&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-12T07:37:42.690" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6709" PostTypeId="2" ParentId="3865" CreationDate="2016-06-13T01:00:07.497" Score="2" Body="&lt;p&gt;elementary OS does not support a global menu bar like Ubuntu or OS X. elementary apps do not use a menu bar, and apps that do use a menu bar display the bar in the window where the developers of the app intended it to display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hacks or workarounds to extract menu bars from applications and display them in a panel are not supported and very likely will break your install (as has been seen several times on this Stack Exchange and Launchpad).&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-06-13T01:00:07.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6710" PostTypeId="2" ParentId="6706" CreationDate="2016-06-13T01:26:51.557" Score="1" Body="&lt;p&gt;You can attempt to diagnose and fix the issue from another &quot;virtual terminal&quot;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; to drop to TTY1. &lt;/li&gt;&#xA;&lt;li&gt;Enter you username, press &lt;kbd&gt;Enter&lt;/kbd&gt;, then your password, then &lt;kbd&gt;Enter&lt;/kbd&gt; to log in.&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;cat .xsession-errors&lt;/code&gt; to view the contents of the &lt;code&gt;.xsession-errors&lt;/code&gt; file.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hopefully an error in there will help you diagnose the issue!&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-06-13T01:26:51.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6711" PostTypeId="2" ParentId="6702" CreationDate="2016-06-13T09:17:30.660" Score="11" Body="&lt;p&gt;This is an example how it works in VMWare Workstation. There're minimal differences to other versions of VMWare. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Mount the VMWare Tools CD. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;VM &gt;&gt; Install VMWare Tools&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Open File Manager and go to VMWare Tools. Extract the VMWareTools-xxxx.tar.gz to a known directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BcOFJ.gif&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BcOFJ.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Open Terminal and go to the directory of the extracted archive. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd Directory/vmware-tools-distrib/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;4) Run installation&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su -c &quot;./vmware-install.pl&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;5) After installation enable VMWare Tools and reboot&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/bin/vmware-user&#xA;&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-06-13T09:17:30.660" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6713" PostTypeId="1" CreationDate="2016-06-13T13:17:30.867" Score="2" ViewCount="819" Body="&lt;p&gt;I have the same problems that several people had before.&#xA;Wifi ain't working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, installing the libnl-3-200 libnl-route-3-200 and libnl-genl-3-200 did not work, nor did downgrading.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At first it worked, however, after a reboot it stopped working again (not after the one immediately after the reinstallation but after the weekend ...) &#xA;So I tried to fix it again, downgrading etc. Installing the libnl-* files did neither work using apt-get nor work by doing so manually.&#xA;After hours of doing so I got frustrated and reinstalled elementaryOS for the first time. Again non aforementioned ways of fixing WiFi worked... after another hour of trying all fixes I could think of I'm now in the process of reinstalling it again (first time with active Ethernet ... ) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone point out another way of fixing the WiFi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need any information to help me, please say so and I will do my best to deliver that info. &lt;/p&gt;&#xA;" OwnerUserId="5290" LastActivityDate="2021-08-11T13:51:31.027" Title="ElementaryOS 0.3.2 AMD64; Macbook Air 2008: Wifi after installing" Tags="|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6714" PostTypeId="2" ParentId="5419" CreationDate="2016-06-13T14:43:15.860" Score="1" Body="&lt;p&gt;Try running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then try again this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and finally update your packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work I'd advise you to install synaptic package manager (it's a gui client) and it will be way easier to manually remove the broken packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install synaptic just run this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install synaptic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it should appear on your slingshot on the system tools tab with an old weird icon.&lt;/p&gt;&#xA;" OwnerUserId="5223" LastActivityDate="2016-06-13T14:43:15.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6715" PostTypeId="1" CreationDate="2016-06-13T17:53:04.540" Score="2" ViewCount="6074" Body="&lt;p&gt;I've been trying to make it boot from a flashable usb stick for 2 days and I still haven't managed to do so. I tried with many other linux distros (ubuntu, mint, debian, manjaro) and they all work fine. I used &lt;a href=&quot;https://rufus.akeo.ie/&quot; rel=&quot;nofollow&quot;&gt;rufus&lt;/a&gt; to make a flashable usb stick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to boot it from the usb stick it just goes to the selection menu and when I click on either install or try elementary OS without installing, 2 lines of text appear in the left corner of the screen and disappear within ~1 second and then the screen just goes full black. I have secure boot disabled, fast boot disabled.&lt;/p&gt;&#xA;" OwnerUserId="5292" LastEditorUserId="9" LastEditDate="2016-06-13T19:45:31.000" LastActivityDate="2019-05-06T20:39:29.007" Title="Can't install nor boot elementary OS from USB (using rufus)" Tags="|system-installation|boot|usb|" AnswerCount="4" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="6716" PostTypeId="2" ParentId="4159" CreationDate="2016-06-13T20:44:14.393" Score="2" Body="&lt;p&gt;Unfortunately this functionality is, I believe, deliberately left out of eOS. And your correct that almost all other Linux distributions do have it.&#xA;Why I don't know? Why don't they inclue a minimize button on their window manager by default? I don't know. But this is how &quot;Gala&quot;(eOS window/display manager) works. Also if you install Elementary Tweaks Tool, you'll notice that some applications use GTK+ decorations while others use Metacity. The one's that are using GTK3+ (such as Chrome) will have a list of options when you right-click the empty header bar, such as what workspace you'd like to move them to/always on top. I agree this approach is not the most intuitive for their target demographic, but what are you gonna do?&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2016-06-13T20:44:14.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6717" PostTypeId="1" CreationDate="2016-06-14T01:42:38.240" Score="1" ViewCount="158" Body="&lt;p&gt;I am using elementary os 0.3.2 (Freya 64-bit), and install English and Chinese language packages. However, I can't find keyboard input method selection icon on the system settings. How can I choose input method for Chinese and make the input method start automatically and it's icon stay on system notice bar?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&#xA;Athens Yan &lt;/p&gt;&#xA;" OwnerUserId="5296" LastActivityDate="2016-06-14T01:42:38.240" Title="Icon for language input method selection missing" Tags="|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6718" PostTypeId="1" AcceptedAnswerId="6899" CreationDate="2016-06-14T05:56:33.127" Score="1" ViewCount="333" Body="&lt;p&gt;For past 1 year, I've been working on elementary OS and due to instability and other issues in the OS, i am switching from elementary OS to gnome ubuntu which is also a debian OS. my question is if i backup my data on elementary OS, can i backup the same on gnome ubuntu? is it possible that all my installations are easily available back on the gnome ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="5297" LastEditorUserId="16827" LastEditDate="2019-04-13T13:30:43.363" LastActivityDate="2019-04-13T13:30:43.363" Title="How do I backup within elementary OS?" Tags="|gnome|backup|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="6721" PostTypeId="2" ParentId="5617" CreationDate="2016-06-14T13:44:12.307" Score="2" Body="&lt;p&gt;What makes the switch from luna -&gt; freya or now freya -&gt; loki a little bit more comfortable is to use Aptik Migration Utility&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT : It seems it now exists only in a paid version.&lt;/p&gt;&#xA;" OwnerUserId="282" LastEditorUserId="16827" LastEditDate="2020-01-05T06:06:06.293" LastActivityDate="2020-01-05T06:06:06.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6722" PostTypeId="1" CreationDate="2016-06-14T15:42:08.483" Score="1" ViewCount="95" Body="&lt;p&gt;I am unable to log in to my system after entering password.It is asking me the password again and again.My desktop is not loading.&lt;/p&gt;&#xA;" OwnerUserId="5306" LastActivityDate="2016-09-14T13:03:08.897" Title="my os password was kept on asking again and again" Tags="|greeter|" AnswerCount="1" CommentCount="4" ClosedDate="2016-10-09T00:26:58.103" ContentLicense="CC BY-SA 3.0" />
  <row Id="6724" PostTypeId="2" ParentId="6715" CreationDate="2016-06-14T16:23:00.653" Score="2" Body="&lt;p&gt;I had similar problems: When getting to the boot launcher where you choose what to boot, you can press 'e' to edit the actual boot command. Add 'nomodeset' after 'quiet splash' and prior to the '--' near the end of the line.&lt;/p&gt;&#xA;" OwnerUserId="5309" LastActivityDate="2016-06-14T16:23:00.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6725" PostTypeId="1" CreationDate="2016-06-14T16:35:56.203" Score="0" ViewCount="809" Body="&lt;p&gt;Hi everyone I'm trying to get elementary to run on my new laptop a Dell XPS 15 9550 with a 500GB SSD with Windows 10 already installed.&#xA;First it got always stuck in the elementary logo screen but by appending 'nomodeset' into the boot options I can get it to boot to a live version. But the next problem is that it cannot find my 500GB SSD only the USB drive and nothing else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So after some research I found it might be related to &quot;Intel Rapid Storage&quot; and looking at my BIOS I can see that the SSD is configured as RAID. Which is rather odd since it's only one drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I guess I have to switch that to AHCI ? But then of course windows won't boot anymore. Will the installation of the grub launcher actually take care of this somehow or is the only way to go to clean up the SSD and reinstall both OS? Will this result in performance loss for Windows 10? What's the deal with the Raid setting?&lt;/p&gt;&#xA;" OwnerUserId="5309" LastActivityDate="2016-10-07T11:45:44.120" Title="Installing elementary OS on XPS 15 9550 with Intel SSD in dual boot Windows 10" Tags="|system-installation|hardware|microsoft-windows|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6726" PostTypeId="1" AcceptedAnswerId="6727" CreationDate="2016-06-14T19:24:11.383" Score="1" ViewCount="217" Body="&lt;p&gt;I am in the process of using &lt;a href=&quot;http://syncthing.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Syncthing&lt;/a&gt; across my systems to sync and consolidating many, many files accumulated over the years in various versions of the stardard xdg-user-dirs (Documents, Downloads, Music, Photos, Videos, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the best way to eliminate all the duplicate files?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-11-14T03:59:25.673" LastActivityDate="2016-11-14T03:59:25.673" Title="How do I scan for and remove duplicate files in Pictures and Music folders?" Tags="|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6727" PostTypeId="2" ParentId="6726" CreationDate="2016-06-14T19:24:11.383" Score="1" Body="&lt;p&gt;The best tool I've found so far is &lt;a href=&quot;https://www.hardcoded.net/dupeguru/&quot; rel=&quot;nofollow&quot;&gt;DupeGuru&lt;/a&gt;. It's free and there is a &lt;a href=&quot;https://launchpad.net/~hsoft/+archive/ubuntu/ppa&quot; rel=&quot;nofollow&quot;&gt;PPA for Ubuntu&lt;/a&gt;. There are also specialized versions for picture and music files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hsoft/ppa&#xA;sudo apt-get-update; sudo apt-get install dupeguru-se dupeguru-me dupeguru-pe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-06-20T19:25:40.273" LastActivityDate="2016-06-20T19:25:40.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6729" PostTypeId="2" ParentId="4592" CreationDate="2016-06-15T05:17:53.437" Score="2" Body="&lt;p&gt;Bringing an end to uncertainties, yesterday(14/06/2016) elementary team has announced availability of elementary OS loki beta which is first development release for upcoming elementary 0.4. It means work is under progress and final release can be expected soon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;References&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://blog.elementary.io/post/145881464631/loki-beta&quot; rel=&quot;nofollow&quot;&gt;Elementary 0.4 Loki beta release announcement&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;http://www.distroscreens.com/2016/06/elementary-os-04-loki-beta-screenshots.html&quot; rel=&quot;nofollow&quot;&gt;elementary OS 0.4 screenshots&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5213" LastActivityDate="2016-06-15T05:17:53.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6730" PostTypeId="2" ParentId="6701" CreationDate="2016-06-15T11:40:41.640" Score="4" Body="&lt;p&gt;You need a newline after &lt;code&gt;esac&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    esac&#xA;    [ -r /home/ajith/.byobu/prompt ] &amp;amp;&amp;amp; . /home/ajith/.byobu/prompt    #byobu-prompt#  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Even though it looks like a special symbol, '[' is actually a command.  Typically, it is the short form of the 'test' command (/usr/bin/test or similar).  By combining &lt;code&gt;esac&lt;/code&gt; and &lt;code&gt;[&lt;/code&gt; you've created a pattern that is not recognized. &lt;/p&gt;&#xA;" OwnerUserId="5315" LastActivityDate="2016-06-15T11:40:41.640" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6731" PostTypeId="2" ParentId="1346" CreationDate="2016-06-15T12:14:28.233" Score="0" Body="&lt;p&gt;I found a solution in the &lt;a href=&quot;https://elementary.today/forum/671-%D1%81%D0%BC%D0%B5%D0%BD%D0%B0-%D1%80%D0%B0%D1%81%D0%BA%D0%BB%D0%B0%D0%B4%D0%BA%D0%B8-%D0%BA%D0%BB%D0%B0%D0%B2%D0%B8%D0%B0%D1%82%D1%83%D1%80%D1%8B/p4#p8332&quot; rel=&quot;nofollow&quot;&gt;russian community&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me translate it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get dist-upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open dconf-editor&lt;/li&gt;&#xA;&lt;li&gt;Go to org &gt; pantheon &gt; desktop &gt; gala &gt; keybindings&lt;/li&gt;&#xA;&lt;li&gt;Set &lt;code&gt;switch-input-source&lt;/code&gt; and &lt;code&gt;switch-input-source-backward&lt;/code&gt; to &lt;code&gt;['']&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;To enable switching by Alt + Shift execute following command:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;Shift_L', '&amp;lt;Alt&amp;gt;Shift_R']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: you &lt;strong&gt;must press Alt first&lt;/strong&gt; to switch the layout&lt;/p&gt;&#xA;" OwnerUserId="5316" LastEditorUserId="5316" LastEditDate="2016-07-03T19:29:47.503" LastActivityDate="2016-07-03T19:29:47.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6732" PostTypeId="1" CreationDate="2016-06-15T13:34:41.883" Score="1" ViewCount="217" Body="&lt;p&gt;I have installed numix-icon-theme but it seems broken and weird. As you can see in the image, the topbar icons are way huge compare to normal. How do i fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MdWKx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MdWKx.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another help i'm asking for y'all is how can i change the &quot;Applications&quot; to windows-like orb(like a mac-logo).&lt;/p&gt;&#xA;" OwnerUserId="5249" LastActivityDate="2016-06-15T13:34:41.883" Title="Numix-icon size problem in the top-bar" Tags="|themes|icons|" AnswerCount="0" CommentCount="1" ClosedDate="2017-10-08T17:27:26.967" ContentLicense="CC BY-SA 3.0" />
  <row Id="6733" PostTypeId="1" CreationDate="2016-06-15T15:18:15.723" Score="5" ViewCount="2604" Body="&lt;p&gt;I wanted to try the elementary os and thought there was only luna and freya, But i knew that the loki will be released in the future, I want to use the latest release always without needing to install another new one after it, I mean if i installed the freya and the loki (not the beta) came out as i know there's no way to upgrade from freya to loki, So if i downloaded the loki (beta) will i be able to upgrade it to the latest release after that ? Or should i just use freya for now ?&lt;/p&gt;&#xA;" OwnerUserId="5318" LastEditorUserId="26" LastEditDate="2016-10-09T00:31:49.117" LastActivityDate="2016-10-09T00:31:49.117" Title="Should I download the Loki Beta or Freya Stable?" Tags="|release-freya|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6734" PostTypeId="2" ParentId="6701" CreationDate="2016-06-15T17:38:17.240" Score="1" Body="&lt;p&gt;yup to the answer above ... could also put a semicolon right after the esac.&#xA;My guess is that this was copied from someone/place and the semicolon got truncated during the copy/paste.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-06-15T17:38:17.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6737" PostTypeId="2" ParentId="6702" CreationDate="2016-06-15T18:06:36.430" Score="0" Body="&lt;p&gt;sorry not at home with my elementary install ... so I cannot verify that this package is there ... you could install open-vm-tools (note it is in Ubuntu) ... &lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-06-15T18:06:36.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6738" PostTypeId="2" ParentId="6733" CreationDate="2016-06-15T21:00:24.840" Score="5" Body="&lt;p&gt;I'd recommend using Freya for now. The beta version of Loki is buggy and not ready for everyday use. From the &lt;a href=&quot;http://blog.elementary.io/post/145881464631/loki-beta&quot; rel=&quot;nofollow noreferrer&quot;&gt;release announcement&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The purpose of releasing a beta is to give developers time to update their apps prior to stable release [...] Beta represents a more-or-less feature-complete release, but it does not represent a stable release.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;As far as I know, there wasn't an official upgrade path from Freya beta to Freya stable, and I'd expect the same with Loki. No matter whether you choose Freya or Loki beta, you'll still have to do a clean install to upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make upgrading simpler, you could &lt;a href=&quot;https://help.ubuntu.com/community/Partitioning/Home/Moving&quot; rel=&quot;nofollow noreferrer&quot;&gt;move your home directory to a separate partition&lt;/a&gt;. Alternately, you could keep your files in Dropbox or Google Drive.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There are instructions on &lt;a href=&quot;https://unix.stackexchange.com/a/195929/142901&quot;&gt;upgrading from Freya beta to Freya stable&lt;/a&gt;, and you might be able to adapt these for Loki. (For example, you'd probably need to change &lt;code&gt;utopic&lt;/code&gt; to &lt;code&gt;xenial&lt;/code&gt;). That said, I personally wouldn't recommend this approach. It's untested and might result in an unstable system.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-06-15T21:00:24.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6740" PostTypeId="1" AcceptedAnswerId="6741" CreationDate="2016-06-16T16:06:45.633" Score="0" ViewCount="185" Body="&lt;p&gt;I have the &lt;code&gt;~/Photos&lt;/code&gt; folder synced between several computers using &lt;a href=&quot;https://syncthing.net/&quot; rel=&quot;nofollow&quot;&gt;Syncthing&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also like to sync the Photos (shotwell) application library database, so all of my work organizing and editing the photos can be kept current across computers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It appears that the default location for the database is &lt;code&gt;~/.local/share/shotwell/data/photo.db&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can this be relocated under the &lt;code&gt;~/Photos&lt;/code&gt; dir? Are there any known issues with database corruption when syncing it between multiple hosts?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-16T16:11:24.547" Title="Is syncing the photos library database between computers supported?" Tags="|file-management|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6741" PostTypeId="2" ParentId="6740" CreationDate="2016-06-16T16:11:24.547" Score="0" Body="&lt;p&gt;The &lt;a href=&quot;https://wiki.gnome.org/Apps/Shotwell/FAQ&quot; rel=&quot;nofollow&quot;&gt;Shotwell FAQ&lt;/a&gt; does not recommend it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Can I access a Shotwell library across a network, possibly from multiple machines?&lt;/strong&gt;&#xA;This is not recommended. Shotwell was not designed to support this use case, and the database can get into an inconsistent state. See this SQLite page on network access of a database file, in particular the problem of file sharing protocols not properly locking the database which can cause corruption.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;&lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=715764&quot; rel=&quot;nofollow&quot;&gt;Ticket #715764&lt;/a&gt; tracks progress on making library network synchronization available in the future.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-16T16:11:24.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6743" PostTypeId="2" ParentId="2395" CreationDate="2016-06-17T01:41:30.423" Score="2" Body="&lt;p&gt;If you enable privacy mode like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/KkuMF.png&quot; alt=&quot;privacy mode&quot; title=&quot;privacy mode&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll still see an empty &quot;Recent&quot; link in file manager:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SUS2Y.png&quot; alt=&quot;recent file manager&quot; title=&quot;recent file mgr&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However it should disappear from the open file dialogue for apps:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/Ea6Nr.png&quot; alt=&quot;open file dialogue&quot; title=&quot;open files dialogue&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-17T01:41:30.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6744" PostTypeId="1" AcceptedAnswerId="7041" CreationDate="2016-06-17T12:55:59.080" Score="10" ViewCount="13387" Body="&lt;p&gt;The last time, when elementary Freya was released, we had to do a clean install from Luna.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will there be any option to directly upgrade to loki from Freya once Loki stable is released?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have spent days to setup my system and it would be hard to set it up again. &lt;/p&gt;&#xA;" OwnerUserId="5335" LastEditorDisplayName="user170" LastEditDate="2016-07-20T15:23:18.987" LastActivityDate="2017-07-26T21:11:57.873" Title="Direct update from Freya to Loki?" Tags="|release-freya|system-installation|updates|release-loki|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6745" PostTypeId="2" ParentId="2801" CreationDate="2016-06-17T19:11:25.620" Score="1" Body="&lt;p&gt;First we are going to check if the touchpad is really using the settings it should.&lt;br&gt;&#xA;Open a terminal and type: &lt;code&gt;xinput&lt;/code&gt;&lt;br&gt;&#xA;Look for your touchpad and remember the id number. Then type: &lt;code&gt;xinput list-props&lt;/code&gt;.&lt;br&gt;&#xA;If a setting is set to 0 it means it's unchecked. If you want to set it to 1 just type&lt;br&gt;&#xA;&lt;code&gt;xinput set-prop [id] [setting number] 1&lt;/code&gt; .&lt;br&gt;&#xA;The same applies if you want to set it to 0. Finally, to make those settings persistent you need to create a .conf file. But to do so I need to know what files you have inside &lt;code&gt;/usr/share/X11/xorg.conf.d&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically it would be completing this file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;InputClass&quot;&#xA;Identifier &quot;touchpad&quot;&#xA;Driver &quot;synaptics&quot; #maybe other driver&#xA;MatchIsTouchpad &quot;on&quot;&#xA;    Option #[option here]&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2016-10-13T19:32:41.510" LastActivityDate="2016-10-13T19:32:41.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6746" PostTypeId="2" ParentId="6744" CreationDate="2016-06-17T23:28:37.210" Score="5" Body="&lt;p&gt;This &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5617/upgrading-distro-from-luna-to-freya/5618#5618&quot;&gt;has already been answered&lt;/a&gt; however maybe some keywords need to be added to the original question so it can be found more easily.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let us know which search terms you tried.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-17T23:28:37.210" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6748" PostTypeId="2" ParentId="2368" CreationDate="2016-06-18T01:43:43.397" Score="1" Body="&lt;p&gt;When all the empty space is gone, just right click in the row at the top (where 'file name', 'size' etc. are) and the drop-down you need opens.&lt;/p&gt;&#xA;" OwnerUserId="12" LastActivityDate="2016-06-18T01:43:43.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6749" PostTypeId="1" AcceptedAnswerId="7148" CreationDate="2016-06-18T03:56:27.437" Score="0" ViewCount="1373" Body="&lt;p&gt;I just did a fresh install of Elementary 0.3.2 in a virtual machine. I am trying to connect from a remote desktop (from the virtual host - windows 10). The login proceeds just fine until the screen loads - there's an xrdp grey screen that sits around for a few seconds before crashing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed xrdp using apt-get without any issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions for solving this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I've since run apt-get upgrade. The grey screen is still there but now the remote desktop no longer crashes.&lt;/p&gt;&#xA;" OwnerUserId="5339" LastEditorUserId="5339" LastEditDate="2016-06-18T07:18:54.550" LastActivityDate="2016-08-03T14:15:55.717" Title="xrdp gray screen" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6751" PostTypeId="1" CreationDate="2016-06-18T09:08:09.383" Score="2" ViewCount="2946" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/976YT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/976YT.png&quot; alt=&quot;Google Weather with system monitor&quot; /&gt;&lt;/a&gt;&lt;br /&gt;&#xA;&lt;sub&gt;(source: &lt;a href=&quot;https://4.bp.blogspot.com/-XLbj_QTCPzE/VDaOisp6zEI/AAAAAAAABNs/Se7mTfzUbWo/s1600/elementary_os.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;blogspot.com&lt;/a&gt;)&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;p&gt;I want to install a system monitor which looks something like the one in the image.&lt;/p&gt;&#xA;" OwnerUserId="5342" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-02-24T02:39:50.010" Title="How can I install this widget on elementary?" Tags="|software-installation|conky|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="6752" PostTypeId="2" ParentId="6751" CreationDate="2016-06-18T09:21:53.260" Score="5" Body="&lt;p&gt;It's a conky with Google Now theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You want to install &lt;code&gt;conky&lt;/code&gt; and &lt;code&gt;conky-manager&lt;/code&gt; and then &lt;a href=&quot;http://satya164.deviantart.com/art/Conky-Google-Now-366545753&quot; rel=&quot;nofollow&quot;&gt;download&lt;/a&gt; the theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unpack the downloaded archive with theme into &lt;code&gt;~/.config&lt;/code&gt; (which is a hidden folder in your home folder - you can unhide it by pressing &lt;code&gt;ctrl+H&lt;/code&gt; in your file manager). Now the theme should show up in conky manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: the &lt;code&gt;conky-manager&lt;/code&gt; is not in the elementary repos and needs to be installed from developer's PPA - &lt;code&gt;ppa:teejee2008/ppa&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2016-06-21T20:43:54.483" LastActivityDate="2016-06-21T20:43:54.483" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="6753" PostTypeId="1" CreationDate="2016-06-18T15:47:47.460" Score="1" ViewCount="636" Body="&lt;p&gt;English (Ingles):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to install Elementary OS, but it is always stuck at first, when I boot the USB (at the elementary logo).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And checked the ISO and tried it several times and nothing, as always.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Español (Spanish):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Estoy intentando instalar Elementary OS, pero se queda siempre trabado al principio, cuando arranco la USB en el logo de Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ya comprobe el ISO y lo grabe varias veces y nada, lo mismo siempre.&lt;/p&gt;&#xA;" OwnerUserId="5345" LastEditorUserId="242" LastEditDate="2016-06-18T16:50:53.507" LastActivityDate="2016-07-30T19:56:11.250" Title="Stuck on the splash screen when trying to install elementary" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6754" PostTypeId="2" ParentId="3206" CreationDate="2016-06-18T20:40:28.323" Score="1" Body="&lt;p&gt;Syntax highlighting does not appear to be enabled in the default build of VIM included with Elementary OS Freya, see below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;VIM - Vi IMproved 7.4 (2013 Aug 10, compiled Jan  2 2014 19:39:02)&#xA;Included patches: 1-52&#xA;Modified by pkg-vim-maintainers@lists.alioth.debian.org&#xA;Compiled by buildd@&#xA;Small version without GUI.  Features included (+) or not (-):&#xA;+acl             -farsi           -mouse_sgr       -tag_old_static&#xA;&amp;lt;snipped&amp;gt;&#xA;-ex_extra        -mouse_jsbterm   -syntax&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-18T20:40:28.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6755" PostTypeId="1" AcceptedAnswerId="7309" CreationDate="2016-06-18T23:49:42.253" Score="1" ViewCount="2055" Body="&lt;p&gt;About a week ago I realized that my Google Chrome title bar was gray.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this UI bug for Google Chrome [Version 51.0.2704.103 (64-bit)]?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After selecting the 'Use system title bar and borders' option, I still have a gray tab bar (instead of the elementary os light gray)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running elementary OS 0.3.2 Freya (64-bit)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot of the title bar:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7Z1m7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7Z1m7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5348" LastEditorUserId="160" LastEditDate="2016-06-19T10:21:48.767" LastActivityDate="2016-10-28T20:37:24.740" Title="Chrome Title Bar: Doesn't match theme" Tags="|google-chrome|user-interface|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6756" PostTypeId="1" CreationDate="2016-06-19T01:28:47.010" Score="0" ViewCount="1559" Body="&lt;p&gt;Just got a WiFi adapter for my laptop and WiFi is working correctly in elementary OS.But Bluetooth is not showing and shows as if there are no Bluetooth adapters installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of &lt;code&gt;sudo lshw -c network&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;       description: Wireless interface&#xA;       product: RT3290 Wireless 802.11n 1T/1R PCIe&#xA;       vendor: Ralink corp.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wlan1&#xA;       version: 00&#xA;       serial: b8:76:3f:53:8f:99&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rt2800pci driverversion=3.19.0-59-generic firmware=0.37 ip=192.168.1.3 latency=0 link=yes wireless=IEEE 802.11bgn&#xA;       resources: irq:16 memory:f0210000-f021ffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:05:00.0&#xA;       logical name: eth0&#xA;       version: 05&#xA;       serial: 84:34:97:89:f6:4e&#xA;       size: 10Mbit/s&#xA;       capacity: 100Mbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:36 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2018-03-01T14:40:50.563" Title="Bluetooth not working with Ralink RT3290" Tags="|wifi|drivers|bluetooth|networking|hp|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6757" PostTypeId="1" CreationDate="2016-06-19T07:15:13.167" Score="0" ViewCount="233" Body="&lt;p&gt;Loki Beta running smoothly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unable to install Git-&#xA;Tried with numerous methods no Luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I receive &#xA;The following packages have unmet dependencies:&#xA; git : Depends: liberror-perl but it is not installable&#xA;E: Unable to correct problems, you have held broken packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;have tried the following to no avail.&#xA;apt-get install -f&#xA;sudo apt-get purge git&#xA;sudo apt-get purge git-all&#xA;sudo dpkg -r --force-all git&#xA;apt-get install --reinstall git&#xA;apt-get install perl&#xA;sudo add-apt-repository ppa:git-core/ppa&#xA;sudo dpkg --configure -a&#xA;apt-get check&#xA;apt-get -f install&#xA;apt-get install liberror-perl&#xA;apt-get autoremove&#xA;dpkg --get-selections | grep hold&#xA;sudo rm -rf /var/lib/apt/lists/*&#xA;Guess what solved the solution. I'm a bloody idiot!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll leave this here , so If any one else has issues like this, the solution is so simple. So easily to over look.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As Loki is a beta, I did not check to see if ticked, &quot;Software &amp;amp; updates&quot;, then &quot;Ubuntu Software&quot; tick box &quot; Community maintained (Universal)&quot; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then do the usuall stuff, as above. will fix the problem,&#xA; unmet dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps others !&lt;/p&gt;&#xA;" OwnerUserId="5350" LastEditorUserId="5350" LastEditDate="2016-06-19T11:27:56.913" LastActivityDate="2016-09-17T16:47:45.070" Title="Git instalattion, unmet or you have held broken packages" Tags="|applications|software-installation|apt|dependencies|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-08T06:49:37.737" ContentLicense="CC BY-SA 3.0" />
  <row Id="6759" PostTypeId="2" ParentId="6757" CreationDate="2016-06-19T11:29:21.297" Score="1" Body="&lt;p&gt;Guess what solved the solution. I'm a bloody idiot!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll leave this here , so If any one else has issues like this, the solution is so simple. So easily to over look.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As Loki is a beta, I did not check to see if ticked, &quot;Software &amp;amp; updates&quot;, then &quot;Ubuntu Software&quot; tick box &quot; Community maintained (Universal)&quot; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then do the usuall stuff, as above. will fix the problem,&#xA; unmet dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps others !&lt;/p&gt;&#xA;" OwnerUserId="5350" LastActivityDate="2016-06-19T11:29:21.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6760" PostTypeId="1" CreationDate="2016-06-19T13:42:57.703" Score="1" ViewCount="191" Body="&lt;p&gt;I was wondering about whether elementary OS appears as itself or as Ubuntu in analytics programs (such as Piwik), so I checked out &lt;a href=&quot;https://www.whatismybrowser.com/detect/what-is-my-user-agent&quot; rel=&quot;nofollow&quot;&gt;this user agent query page&lt;/a&gt; to see what the result would be. I unfortunately got this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:47.0) Gecko/20100101&#xA;  Firefox/47.0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So elementary OS appear as Ubuntu. Is this something that can and/or will be changed, or shall elementary OS appear as Ubuntu for the foreseeable future?&lt;/p&gt;&#xA;" OwnerUserId="4844" LastEditorUserId="3757" LastEditDate="2016-06-19T14:00:49.487" LastActivityDate="2016-11-11T20:55:21.697" Title="Is it possible for elementary OS to appear as elementary OS (rather than Ubuntu) in a user agent query and/or in analytics detection?" Tags="|ubuntu|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6761" PostTypeId="2" ParentId="6702" CreationDate="2016-06-19T14:28:21.413" Score="5" Body="&lt;p&gt;To install the updated and open-source version of VMware tools run the following command in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install open-vm-tools open-vm-tools-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-19T14:28:21.413" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6762" PostTypeId="1" AcceptedAnswerId="6882" CreationDate="2016-06-19T17:54:59.127" Score="0" ViewCount="113" Body="&lt;p&gt;I am trying to install elementary OS 0.3.2 (Freya). However, when I try to do this, it does not detect my Windows 10 partition. I can't upload a picture, but even though I have 2 partitions in /dev/sda, it doesn't show either of them. &#xA;If I run &lt;code&gt;sudo parted /dev/sda1 print&lt;/code&gt; or &lt;code&gt;sudo parted /dev/sda2 print&lt;/code&gt;, it says &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Model: Unknown (unknown)&#xA;Disk /dev/sda1: 524MB&#xA;Sector size (logical/physical): 512B/4096B&#xA;Partition Table: loop&#xA;&#xA;Number  Start  End    Size   File system  Flags&#xA; 1      0.00B  524MB  524MB  ntfs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Model: Unknown (unknown)&#xA;Disk /dev/sda2: 320GB&#xA;Sector size (logical/physical): 512B/4096B&#xA;Partition Table: loop&#xA;&#xA;Number  Start  End    Size   File system  Flags&#xA; 1      0.00B  320GB  320GB  ntfs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;respectively. But if I run &lt;code&gt;sudo parted /dev/sda print&lt;/code&gt;, it says &lt;code&gt;Error: Can't have overlapping partitions.&lt;/code&gt;&#xA;All in all, I have three questions: What does this mean, why won't it detect the partitions for installation, and how do I make it detect the partitions?&lt;/p&gt;&#xA;" OwnerUserId="5353" LastEditorUserId="26" LastEditDate="2016-09-25T17:08:22.493" LastActivityDate="2016-09-25T17:08:22.493" Title="elementary OS Freya not detecting partitions" Tags="|system-installation|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6763" PostTypeId="1" CreationDate="2016-06-19T19:58:23.893" Score="4" ViewCount="2801" Body="&lt;p&gt;I installed Master PDF editor from &lt;a href=&quot;https://code-industry.net/free-pdf-editor/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, selecting the 64 bit .deb file. I installed it through the software center, and everything seemed to have been installed correctly, except that when I try to click its icon on the Applications menu the program doesn't start, nor does it start if I try to open a file with it; Gnome System Monitor doesn't show it anywhere, either. I tried purging and reinstalling, but nothing changed.&lt;/p&gt;&#xA;" OwnerUserId="4490" LastEditorUserId="5565" LastEditDate="2016-10-05T21:20:37.013" LastActivityDate="2020-07-03T04:29:51.833" Title="Master PDF Editor installs correctly, but won't start" Tags="|applications|appcenter|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="6764" PostTypeId="1" CreationDate="2016-06-20T01:50:21.047" Score="0" ViewCount="181" Body="&lt;p&gt;I made a .desktop file so I could run an .sh file from the Plank dock. It is as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Terminal=true&#xA;Name=Drive&#xA;Icon=/home/finn/Programs/drive-logo.png&#xA;Exec=/home/finn/Programs/grive.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It links to this .sh script, which is currently a placeholder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;cd ~/Drive&#xA;mkdir itworked&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The last line will be replaced with &lt;code&gt;grive&lt;/code&gt; once I get it working. At the moment it just makes a folder so I can see if the script ran successfully. I made it executable with &lt;code&gt;sudo chmod +x drive.desktop&lt;/code&gt; while in /usr/share/applications. Currently it works perfectly if I navigate to  /usr/share/applications in the Files browser and double-click on the icon. It shows up in the Slingshot applications menu, and I can drag it to the Plank dock, but when I try click and open it from either of these places it does nothing. Weirdly, if I open Files as Administrator and then try open it from there it also does nothing. I've tried setting the permissions to match other applications, or just be fully open to everyone, but it didn't help.&lt;/p&gt;&#xA;" OwnerUserId="5354" LastEditorUserId="5565" LastEditDate="2016-10-08T02:35:15.497" LastActivityDate="2016-10-08T02:35:15.497" Title=".desktop file works when opened from /usr/share/applications but not from Slingshot or Plank" Tags="|plank|slingshot|app-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6765" PostTypeId="2" ParentId="6764" CreationDate="2016-06-20T03:52:51.963" Score="1" Body="&lt;p&gt;I just changed the third line to &lt;code&gt;terminal=false&lt;/code&gt; and it works now, which is a shame because I wanted to have the terminal open when the drive syncs, but I guess you can't have everything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looks like it's been a bug for a few years, not really eOS's fault:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-terminal/+bug/1176526&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-terminal/+bug/1176526&lt;/a&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/slingshot/+bug/1066462&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/slingshot/+bug/1066462&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5354" LastActivityDate="2016-06-20T03:52:51.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6766" PostTypeId="2" ParentId="5526" CreationDate="2016-06-20T04:03:44.830" Score="1" Body="&lt;p&gt;Just wanted to come back and give an update on this problem.  I found the answer to this is:  go to your /user/share/themes/elementary/gtk-3.0/gtk-widgets.css and open it as root (in order to make changes to it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you open gtk-widgets.css, use the term 'slider-width' and within the gtk-widgets.css file it should popup no less than five times.  Here is each entry and what I changed them to, to get some really, fat, juicy scrollbars for everything else inside ElementaryOS that the first fix didn't handle (in my original post):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.scale {&#xA;    -GtkScale-slider-length: 22;&#xA;    &lt;strong&gt;-GtkRange-slider-width: 62;&lt;/strong&gt;&#xA;    -GtkRange-trough-border: 16;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.scrollbar {&#xA;    background-image: none;&#xA;    border-style: solid;&#xA;    -GtkRange-trough-border: 2;&#xA;    -GtkScrollbar-has-backward-stepper: false;&#xA;    -GtkScrollbar-has-forward-stepper: false;&#xA;    &lt;strong&gt;-GtkRange-slider-width: 40;&lt;/strong&gt;&#xA;    -GtkScrollbar-min-slider-length: 30;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.scrollbar:backdrop {&#xA;    -GtkRange-trough-border: 5;&#xA;    &lt;strong&gt;-GtkRange-slider-width: 10;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.scrollbar.slider:insensitive {&#xA;    &lt;strong&gt;-GtkRange-slider-width: 10;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GtkSwitch {&#xA;    font: 1;&#xA;    &lt;strong&gt;-GtkSwitch-slider-width: 68;&lt;/strong&gt; (&lt;em&gt;this last value is what was changed in my original post, but it never worked for everything (i.e. like Firefox, etc...see above pic...turns out the other 4 values needed changed too&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note you can play with these figures to get what you want.  For me, since I have a huge desktop screen, I like scrollbars that are so fat that you can see them from 40-50ft across the room and that also, btw, take less than a micro-sec to grab and do what you want with them ;-)&lt;/p&gt;&#xA;" OwnerUserId="5119" LastActivityDate="2016-06-20T04:03:44.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6767" PostTypeId="1" CreationDate="2016-06-20T04:19:34.783" Score="1" ViewCount="878" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QeGaL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QeGaL.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;hi guys,&#xA;i am on elementary OS Loki, updated to latest.&#xA;currently my wifi is not working as in ubuntu and the wifi tab in network setting shows disabled even tho i have it clicked.&#xA;the wifi is working fine in ubuntu 16.04 tho.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any help appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5355" LastEditorUserId="26" LastEditDate="2016-09-25T17:10:01.893" LastActivityDate="2017-08-26T10:19:05.257" Title="usb wifi TL-WN725N_WN723N not working + problem in network setting" Tags="|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6768" PostTypeId="1" CreationDate="2016-06-20T10:20:52.800" Score="1" ViewCount="1093" Body="&lt;p&gt;Only way of transferring data to and from my laptop is the SD card port, its the only thing that works, none of my usb ports are working and my dvd drive is dead as well. Also i want it alongside Windows 10 as dual boot not on a virtual machine.&#xA;Please help!&lt;/p&gt;&#xA;" OwnerUserId="5356" LastActivityDate="2017-08-10T02:09:02.590" Title="How can I install elementary OS alongside windows 10 without a USB or DVD" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6770" PostTypeId="1" CreationDate="2016-06-20T12:24:36.240" Score="1" ViewCount="4" Body="&lt;p&gt;i don't know i did something or something that installed please help&lt;a href=&quot;https://i.stack.imgur.com/UC00X.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UC00X.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5358" LastActivityDate="2016-06-20T12:24:36.240" Title="I got this window saying desktop, and I'm unable to close it. I've tried restart but it just does not go. what to do?" Tags="|desktop|" AnswerCount="0" CommentCount="0" ClosedDate="2016-06-22T17:10:55.997" ContentLicense="CC BY-SA 3.0" />
  <row Id="6771" PostTypeId="2" ParentId="6768" CreationDate="2016-06-20T14:33:13.477" Score="1" Body="&lt;p&gt;My favorite two options in a scenario like this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Remove laptop hard drive and connect to another computer that can boot from USB or DVD, then run installer from there.&lt;/li&gt;&#xA;&lt;li&gt;Install over the network via PXE boot. (requires some sysadmin skills)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2016-06-20T14:33:13.477" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6772" PostTypeId="1" AcceptedAnswerId="6773" CreationDate="2016-06-20T14:56:02.727" Score="1" ViewCount="6023" Body="&lt;p&gt;The versions of OpenSSH and OpenSSL that ship with the Ubuntu base version can be several releases out of date. How can I install updated versions?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2020-08-10T21:11:38.680" LastActivityDate="2021-08-16T10:56:10.520" Title="How do I install current versions of OpenSSH and LibreSSL?" Tags="|software-installation|security|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6773" PostTypeId="2" ParentId="6772" CreationDate="2016-06-20T14:56:02.727" Score="1" Body="&lt;p&gt;Here's how to install current versions of each on your computer.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;First, download, build and install the latest version of LibreSSL&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;cd /usr/local/src&lt;/code&gt; (or whatever directory you like to build software in)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y build-essential checkinstall&#xA;&#xA;curl http://ftp.openbsd.org/pub/OpenBSD/LibreSSL/libressl-&amp;lt;version-number&amp;gt;.tar.gz | tar -xzv; cd libressl-&amp;lt;version-number&amp;gt;&#xA;&#xA;./configure --libdir=/lib/x86_64-linux-gnu; make check; sudo checkinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Then build OpenSSH against the updated LibreSSL libraries&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl https://mirror.planetunix.net/pub/OpenBSD/OpenSSH/portable/openssh-&amp;lt;version-number&amp;gt;p1.tar.gz | tar -xzv&#xA;&#xA;cd openssh-&amp;lt;version-number&amp;gt;; ./configure --libdir=/lib/x86_64-linux-gnu --with-ssl-dir=/lib/x86_64-linux-gnu --without-zlib&#xA;&#xA;&#xA;make; sudo checkinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Be aware that your openssh binaries will be downgraded anytime there is an 'update' to the Ubuntu openssh package, and you'll have to re-install.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2020-08-10T20:32:57.837" LastActivityDate="2020-08-10T20:32:57.837" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="6775" PostTypeId="1" AcceptedAnswerId="6776" CreationDate="2016-06-20T17:48:13.707" Score="1" ViewCount="5470" Body="&lt;p&gt;How can I install the Vivaldi web browser from its repository so it can be updated with apt-get commands?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2016-10-12T23:59:56.910" LastActivityDate="2020-08-10T21:02:26.573" Title="How do I install the Vivaldi web browser from its software repository?" Tags="|software-installation|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6776" PostTypeId="2" ParentId="6775" CreationDate="2016-06-20T17:48:13.707" Score="1" Body="&lt;pre&gt;&lt;code&gt;echo &amp;quot;echo deb http://repo.vivaldi.com/stable/deb/ stable main &amp;gt; /etc/apt/sources.list.d/vivaldi.list&amp;quot; | sudo sh&#xA;curl http://repo.vivaldi.com/stable/linux_signing_key.pub | sudo apt-key add -&#xA;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 1397BC53640DB551&#xA;sudo apt update; sudo apt install vivaldi-stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2020-08-10T21:02:26.573" LastActivityDate="2020-08-10T21:02:26.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6779" PostTypeId="1" AcceptedAnswerId="6813" CreationDate="2016-06-20T22:30:12.657" Score="5" ViewCount="8239" Body="&lt;p&gt;I'm not sure what might be the issue, I have a cleaned installation of Freya and I'm not able to install workbench. I also have freya installed on my desktop at work and workbench is installed, but I can't confirm if it's the same version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RjvsS.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RjvsS.png&quot; alt=&quot;Dependency is not satisfiable: libatkmm-1.6-1v5 (&amp;gt;= 2.24.0)&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Dependency is not satisfiable: libatkmm-1.6-1v5 (&gt;= 2.24.0)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;" OwnerUserId="80" LastActivityDate="2017-04-23T17:05:28.460" Title="Can't install mysql workbench, dependency is not satisfiable" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6780" PostTypeId="1" CreationDate="2016-06-20T22:44:26.660" Score="1" ViewCount="828" Body="&lt;p&gt;It's a pretty easy to get this behaivor using ubuntu - I just enable keyborard layout switching by Caps Lock and Shift+Caps Lock automatically become Caps Lock switcher. When using elementary I try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['Caps_Lock']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then Caps Lock both enables Caps Lock and switches keyboard layout.&lt;/p&gt;&#xA;" OwnerUserId="5366" LastActivityDate="2019-08-08T07:00:57.260" Title="How do i have Caps Lock switching keyboard layout and Shift+Caps Lock enabling Caps Lock?" Tags="|keyboard|keyboard-shortcuts|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6781" PostTypeId="2" ParentId="3081" CreationDate="2016-06-21T01:04:35.753" Score="1" Body="&lt;p&gt;You can always change it back using recovery mode if anything breaks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it should be safe&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-06-21T01:04:35.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6783" PostTypeId="1" CreationDate="2016-06-21T10:35:11.817" Score="1" ViewCount="176" Body="&lt;p&gt;I currently have an external monitor connected to my laptop via VGA. I am using Freya. My external monitor is configured to be the primary display and my laptop screen is switched off. Plank works properly and is always available on my external display. However, the wingpanel is invisible. Note, that it is there and the width required for the panel is properly reserved, but I cant see or click anything on it. When I kill the wingpanel with GNOME system monitor, it relaunches itself and appears half-assed as shown in the image. I can click on the indicators but cant see them clearly. Restarting resets the whole thing (back to invisible wingpanel). I dont have synapse installed. And slingshot always works with Super + Spacebar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/O6cdq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O6cdq.png&quot; alt=&quot;After killing wing-panel.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5370" LastActivityDate="2016-06-21T10:35:11.817" Title="Problem with Wingpanel in External Monitor setup" Tags="|release-freya|wingpanel|display|" AnswerCount="0" CommentCount="0" ClosedDate="2019-02-20T16:09:31.643" ContentLicense="CC BY-SA 3.0" />
  <row Id="6784" PostTypeId="1" CreationDate="2016-06-21T11:56:00.080" Score="0" ViewCount="143" Body="&lt;p&gt;Is FreyaOS available in Slovak language? And also where can I find available language packs?&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="5372" LastActivityDate="2016-06-22T09:36:07.660" Title="Language packs - translations" Tags="|language|" AnswerCount="1" CommentCount="0" ClosedDate="2016-07-12T09:35:17.467" ContentLicense="CC BY-SA 3.0" />
  <row Id="6785" PostTypeId="2" ParentId="2504" CreationDate="2016-06-21T12:06:46.557" Score="0" Body="&lt;p&gt;Try importing your music again. If you're importing the same music, a prompt will appear saying that the files are already in the library. Ignore it. Try to play a song. The app should work by then. Unfortunately, you have to do this every time you turn on your computer.&lt;/p&gt;&#xA;" OwnerUserId="5373" LastActivityDate="2016-06-21T12:06:46.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6786" PostTypeId="1" AcceptedAnswerId="6789" CreationDate="2016-06-21T16:44:24.940" Score="0" ViewCount="123" Body="&lt;p&gt;I downloaded elementary OS a few minutes ago. I really like it, but when I open the Software Updater and download its updates, I thought I saw &quot;Elementary 14.04&quot;. I know elementary is based on Ubuntu and this might be silly but I'm scared. Will this change my computer to Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="5374" LastEditorUserId="5565" LastEditDate="2016-10-01T23:44:25.080" LastActivityDate="2016-10-01T23:44:25.080" Title="Will updating elementary OS turn it into Ubuntu" Tags="|updates|ubuntu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6787" PostTypeId="5" CreationDate="2016-06-21T18:24:27.477" Score="0" Body="&lt;p&gt;Pantheon Photos is the default photo viewer application on elementary OS. The application is based on &quot;Shotwell&quot;, a photo application by Yorba, and was &lt;a href=&quot;http://linux.softpedia.com/blog/Shotwell-Forked-by-elementary-OS-Becomes-Pantheon-Photos-420732.shtml&quot; rel=&quot;nofollow&quot;&gt;forked by elementary in early 2014&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:37.763" LastActivityDate="2016-10-06T13:20:37.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6788" PostTypeId="4" CreationDate="2016-06-21T18:24:27.477" Score="0" Body="The default photo viewer application on elementary OS. Formerly known as &quot;Shotwell&quot;." OwnerUserId="4185" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:38.043" LastActivityDate="2016-10-06T13:19:38.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6789" PostTypeId="2" ParentId="6786" CreationDate="2016-06-21T20:48:11.590" Score="1" Body="&lt;p&gt;No it won't turn into Ubuntu :)&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2016-06-21T20:48:11.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6790" PostTypeId="1" CreationDate="2016-06-22T00:56:19.993" Score="1" ViewCount="3787" Body="&lt;p&gt;I followed this tutorial (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/252/403&quot;&gt;https://elementaryos.stackexchange.com/a/252/403&lt;/a&gt;) to create a folder in Plank for applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The folder is created, but I want to know if it's possible to change the icon of the folder to a custom one. Right now, the icon is like this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/byjt6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/byjt6.png&quot; alt=&quot;https://i.stack.imgur.com/byjt6.png&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried Alacarte but the folder doesn't appear on the list. Maybe changing the icon directly on Pantheon Files?&lt;/p&gt;&#xA;" OwnerUserId="403" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-27T22:57:10.967" Title="How to change icon folder in Plank?" Tags="|plank|icons|folder|" AnswerCount="1" CommentCount="0" ClosedDate="2016-11-29T11:49:13.013" ContentLicense="CC BY-SA 3.0" />
  <row Id="6791" PostTypeId="2" ParentId="6784" CreationDate="2016-06-22T09:36:07.660" Score="0" Body="&lt;p&gt;Yes it seems like Slovak is available. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to System Settings &gt;&gt; Language &amp;amp; Region. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on the Unlock Button on the right upper corner and insert your password in the authentication window. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on the &quot;+&quot; symbol on the left lower corner and choose the language you want. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xvg1l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xvg1l.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-06-22T09:36:07.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6792" PostTypeId="2" ParentId="6690" CreationDate="2016-06-22T14:33:33.630" Score="1" Body="&lt;p&gt;Go to your Trash and delete the Trash with the drive plugged in. This automatically deletes the content of the &lt;code&gt;.Trash&lt;/code&gt; folder(s) from all plugged in devices.&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2016-06-22T14:33:33.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6795" PostTypeId="1" AcceptedAnswerId="6805" CreationDate="2016-06-23T17:15:04.517" Score="0" ViewCount="261" Body="&lt;p&gt;After fresh install I updated my elementary os. It said that I have to reboot. I didn't. I installed my amd drivers and then I rebooted. I rebooted it myself I didn't clicked reboot.The e symbol appeared then dissapeared. And then my computer opened as a command line. There was no desktop. Help please !!&lt;/p&gt;&#xA;" OwnerUserId="5381" LastEditorUserId="5381" LastEditDate="2016-06-23T17:26:06.797" LastActivityDate="2016-06-23T23:48:07.823" Title="Computer desktop is gone?" Tags="|command-line|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="6796" PostTypeId="1" AcceptedAnswerId="6801" CreationDate="2016-06-23T17:25:03.213" Score="6" ViewCount="1578" Body="&lt;p&gt;This is more of a puzzle than a problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time I start Firefox, a &quot;Desktop&quot; folder is created in my home folder (home/me/Desktop).  I delete it, use Firefox, it comes back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I sure it's Firefox?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a basic, default installation (Freya), which has been updated.  The only changes I made were to remove Midori and add Firefox.  I did some trial-and-error and it only happens (and always happens) after starting Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could live with it, I suppose, but the voices in my head are anal-retentive and being all ocd fussy about it. ;-)&lt;/p&gt;&#xA;" OwnerUserId="5365" LastActivityDate="2018-03-10T13:24:10.307" Title="Why does Firefox keep creating a ~/Desktop folder?" Tags="|desktop|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6797" PostTypeId="2" ParentId="6795" CreationDate="2016-06-23T17:25:11.650" Score="0" Body="&lt;p&gt;Try to restart lightdm deamon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm stop&#xA;sudo service lightdm start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Come back and confirm if that did work for you.&lt;/p&gt;&#xA;" OwnerUserId="5380" LastActivityDate="2016-06-23T17:25:11.650" CommentCount="18" ContentLicense="CC BY-SA 3.0" />
  <row Id="6799" PostTypeId="1" CreationDate="2016-06-23T19:49:31.053" Score="1" ViewCount="2330" Body="&lt;p&gt;I installed the AMD graphics driver and it made some problems on my computer.&lt;br&gt;&#xA;How can I uninstall the AMD graphics driver by terminal?&lt;/p&gt;&#xA;" OwnerUserId="5381" LastEditorUserId="242" LastEditDate="2016-10-21T20:49:56.713" LastActivityDate="2016-10-21T20:49:56.713" Title="How to uninstall amd graphics driver?" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6800" PostTypeId="2" ParentId="4411" CreationDate="2016-06-23T20:11:38.743" Score="1" Body="&lt;p&gt;I had that problem with Freya 0.3.2 on my Asus X552V. So far the only solution that worked for me is instaling 0.3.1 and then just upgrade it. After that, everything works fine.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-06-23T20:11:38.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6801" PostTypeId="2" ParentId="6796" CreationDate="2016-06-23T20:46:03.953" Score="5" Body="&lt;p&gt;You can set your &lt;code&gt;$HOME&lt;/code&gt; directory as &lt;code&gt;Desktop&lt;/code&gt; in xdg-user-dirs config file (~/.config/user-dirs.dirs). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This can be done manually through text editor. Open this file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.config/user-dirs.dirs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And add this line to the end of file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DESKTOP_DIR=&quot;$HOME/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Result:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Rs3mB.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rs3mB.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-06-23T20:46:03.953" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6802" PostTypeId="2" ParentId="905" CreationDate="2016-06-23T20:54:00.897" Score="1" Body="&lt;p&gt;If you had problems after installing Elementary second time, then check Additional Driver section, and select a driver then install it.&lt;/p&gt;&#xA;" OwnerUserId="5381" LastEditorUserId="26" LastEditDate="2016-09-18T20:13:31.667" LastActivityDate="2016-09-18T20:13:31.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6803" PostTypeId="1" CreationDate="2016-06-23T21:18:37.053" Score="1" ViewCount="817" Body="&lt;p&gt;Can laptop touchscreen be used? The main reason i installed elementary to try linux is that i read touchscreen could be activated on ubuntu. I also read a question for old elementary os about this answerred positively. Can anyone guide this noob please!! I tried searching for it but couldn't find any resource for freya. Any help will be greatly appreciated. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="5383" LastActivityDate="2016-06-23T21:18:37.053" Title="Use Touchscreen in freya" Tags="|release-freya|touchscreen|" AnswerCount="0" CommentCount="4" ClosedDate="2016-12-28T20:37:18.373" ContentLicense="CC BY-SA 3.0" />
  <row Id="6805" PostTypeId="2" ParentId="6795" CreationDate="2016-06-23T23:48:07.823" Score="0" Body="&lt;p&gt;You need to uninstall the propietary driver and install back the open source driver, here are the steps:&#xA;turn on the pc and wait until the command line is shown and put this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge xorg-driver-fglrx fglrx*&#xA;sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core&#xA;sudo reconfigure xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;put each command one by one (each line is a command).&#xA;the first command will complety remove the propietary driver, the second reinstalls the open source driver and the third  one reconfigure the system to use the driver open source.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All these steps are well docuemtned &lt;a href=&quot;https://wiki.ubuntu.com/X/Troubleshooting/VideoDriverDetection?action=show&amp;amp;redirect=X%2FTroubleshooting%2FFglrxInteferesWithRadeonDriver&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, if you have a doubt you can check the link for more information&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-23T23:48:07.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6808" PostTypeId="1" AcceptedAnswerId="6809" CreationDate="2016-06-24T13:24:46.087" Score="2" ViewCount="951" Body="&lt;p&gt;Here's my &lt;strong&gt;.desktop&lt;/strong&gt; file content &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;[Desktop Entry]&#xA;&lt;b&gt;Encoding&lt;/b&gt;=UTF-8&#xA;&lt;b&gt;Name&lt;/b&gt;=wifite&#xA;&lt;b&gt;Comment&lt;/b&gt;=WiFite , fight for WiFi&#xA;&lt;b&gt;Exec&lt;/b&gt;=pantheon-terminal -e 'wifite --help' &#xA;&lt;b&gt;Icon&lt;/b&gt;=wifite&#xA;&lt;b&gt;Terminal&lt;/b&gt;=true&#xA;&lt;b&gt;Type&lt;/b&gt;=Application&#xA;&lt;b&gt;Categories&lt;/b&gt;=GNOME;Application;Development;&#xA;&lt;b&gt;StartupNotify&lt;/b&gt;=false&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I even used this &lt;code&gt;&lt;b&gt;Exec&lt;/b&gt;=gksudo pantheon-terminal -e '/usr/bin/x11/wifite.py'&lt;/code&gt;.&#xA;But nothing works&lt;/p&gt;&#xA;" OwnerUserId="5388" LastEditorUserId="3757" LastEditDate="2016-06-24T14:11:24.783" LastActivityDate="2017-08-28T21:34:58.553" Title="Script not opening in terminal via desktop launcher" Tags="|applications|pantheon-terminal|desktop|slingshot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6809" PostTypeId="2" ParentId="6808" CreationDate="2016-06-24T13:57:03.817" Score="2" Body="&lt;p&gt;Try changing the &lt;strong&gt;Exec&lt;/strong&gt; line in the file to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;pkexec pantheon-terminal -e &quot;&lt;b&gt;bash -c 'wifite;$SHELL'&lt;/b&gt;&quot;&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or (alternate version)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;pantheon-terminal -e &quot;&lt;b&gt;bash -c 'pkexec wifite;$SHELL'&lt;/b&gt;&quot;&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then try the &lt;strong&gt;.desktop&lt;/strong&gt; file and see if it works :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE : I changed &lt;strong&gt;gksudo&lt;/strong&gt; to &lt;strong&gt;pkexec&lt;/strong&gt; so that you have a better looking password prompt.&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-06-25T01:33:43.780" LastActivityDate="2016-06-25T01:33:43.780" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="6811" PostTypeId="1" CreationDate="2016-06-24T15:40:50.627" Score="1" ViewCount="1271" Body="&lt;p&gt;I installed java 9.On minecraft i can play with java 9 on singleplayer.But When i want to connect to a server minecraft doesn't crash it only gives an error saying &quot;java.io.IOException : Unable to connect to remote host : Connection refused&quot; I looked up to internet but i couldn't find something similar to mine&#xA;I also got an error from another server.The error is Internal Exception : java.lang.runtimeException : Unable to access address of buffer.&lt;/p&gt;&#xA;" OwnerUserId="5374" LastEditorUserId="5374" LastEditDate="2016-06-24T15:52:27.270" LastActivityDate="2016-06-24T19:35:34.720" Title="Minecraft java.io.IOException : Unable to connect to remote host : Connection refused" Tags="|games|" AnswerCount="2" CommentCount="0" ClosedDate="2016-07-23T08:22:46.547" ContentLicense="CC BY-SA 3.0" />
  <row Id="6812" PostTypeId="2" ParentId="6811" CreationDate="2016-06-24T16:44:05.783" Score="0" Body="&lt;p&gt;you have a premium account?, i got the same problem with a minecraft server and was that you need a premium account, i bought my premium account and all was solved, by the way this question is not related to elementary so pleease check this in a minecraft forum or in the suport page of &lt;a href=&quot;https://help.mojang.com/&quot; rel=&quot;nofollow&quot;&gt;mojang&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-24T16:44:05.783" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6813" PostTypeId="2" ParentId="6779" CreationDate="2016-06-24T16:45:12.597" Score="7" Body="&lt;p&gt;It is not the best solution, but if you install MysqlWB V 6.3.6 It should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://cdn.mysql.com//archives/mysql-workbench/mysql-workbench-community-6.3.6-1ubu1404-amd64.deb&quot; rel=&quot;noreferrer&quot;&gt;http://cdn.mysql.com//archives/mysql-workbench/mysql-workbench-community-6.3.6-1ubu1404-amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit note: there is a bug in the version of MySQL Workbench in the repositories, it makes the queries to not display results, thats is why is more recommendable install the deb provided in this post.&lt;/p&gt;&#xA;" OwnerUserId="5391" LastEditorUserId="4710" LastEditDate="2016-06-25T03:37:02.353" LastActivityDate="2016-06-25T03:37:02.353" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6814" PostTypeId="2" ParentId="6811" CreationDate="2016-06-24T19:35:34.720" Score="0" Body="&lt;p&gt;Found it.It is because of Java.I uninstalled Java 9 And i installed Java 7 Everything worked fine.(I didn't install Java 8 because last time it was crashing Minecraft.)&lt;/p&gt;&#xA;" OwnerUserId="5374" LastActivityDate="2016-06-24T19:35:34.720" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6815" PostTypeId="2" ParentId="6799" CreationDate="2016-06-25T01:38:18.283" Score="1" Body="&lt;p&gt;Run the following commands to remove the driver&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge fglrx*&#xA;sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core&#xA;sudo reconfigure xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running the commands reboot your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WARNING : These commands might destroy your system&lt;/p&gt;&#xA;" OwnerUserId="3757" LastEditorUserId="3757" LastEditDate="2016-06-26T00:40:28.883" LastActivityDate="2016-06-26T00:40:28.883" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6816" PostTypeId="2" ParentId="5132" CreationDate="2016-06-25T04:46:37.713" Score="0" Body="&lt;p&gt;I've got an MSI laptop same specs. and I'm having no end of issues installing Ubuntu. Same problems with the live CD. I did manage to get 16.04 installed but on reboot all I got was a desktop background and that's it, Unity didn't finish loading. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other than waiting for firmware updates and Ubuntu 16.10, I don't know what else to do. I will use windows 10 as a last resort but I really don't want to use windows so any help would be really appreciated. &lt;/p&gt;&#xA;" OwnerUserId="5395" LastActivityDate="2016-06-25T04:46:37.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6817" PostTypeId="1" CreationDate="2016-06-25T14:37:10.160" Score="0" ViewCount="186" Body="&lt;p&gt;I wanted prove this linux distro (I heard good things about it), but I'm having this problem with the wifi connection: it simply doesn't work, both during installation and after i have installed the system.&#xA;More specifically, it finds my home connection, but it can't establish a connection, leaving me offline.&#xA;I have a USB WIFI ADAPTER, the specific model is the Atlantis Wireless N 300 mps NetFly UP WN (to be clear: &lt;a href=&quot;http://www.atlantisland.it/pub/prodotti.php?famiglia=1&amp;amp;l1=2&amp;amp;l2=3&amp;amp;articolo=QTAyLVVQLVczMDBO&quot; rel=&quot;nofollow&quot;&gt;http://www.atlantisland.it/pub/prodotti.php?famiglia=1&amp;amp;l1=2&amp;amp;l2=3&amp;amp;articolo=QTAyLVVQLVczMDBO&lt;/a&gt;).&#xA;In the manufacturer's webpage i found out the package with the driver (i believe), but I've not been able to install it (I have some knowledge of linux distros, but I'm not a dragon in this field...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you suggest me some solution??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oh, I was mforgetting: I don't have the possibility to connect my desktop pc directly to my mode-router directly with the ethernet wire...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your attention!&lt;/p&gt;&#xA;" OwnerUserId="5397" LastActivityDate="2016-09-27T16:10:06.920" Title="Wifi connectivity issue during the installation of Freya" Tags="|release-freya|wifi|networking|drivers|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6818" PostTypeId="1" AcceptedAnswerId="6819" CreationDate="2016-06-25T14:55:11.647" Score="1" ViewCount="346" Body="&lt;p&gt;I have downloaded and installed the messenger &lt;code&gt;64 bit deb&lt;/code&gt;  from this &lt;a href=&quot;https://messengerfordesktop.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;website&lt;/a&gt; But it doesn't work, I got the following screen.  &lt;a href=&quot;https://i.stack.imgur.com/RHnO3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RHnO3.png&quot; alt=&quot;screens&quot;&gt;&lt;/a&gt; This is the error I got in the &lt;code&gt;Dev tools&lt;/code&gt; of the app.&lt;a href=&quot;https://i.stack.imgur.com/0iNpK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0iNpK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; Can anyone help me to get it working. &lt;/p&gt;&#xA;" OwnerUserId="3955" LastActivityDate="2016-06-25T15:52:16.423" Title="messenger is not working in elementary os Freya" Tags="|applications|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6819" PostTypeId="2" ParentId="6818" CreationDate="2016-06-25T15:52:16.423" Score="1" Body="&lt;p&gt;that app is a little bit outdated, did you try &lt;a href=&quot;http://meetfranz.com/&quot; rel=&quot;nofollow&quot;&gt;Franz&lt;/a&gt;, is a multi protocol web chat client and it has FB messenger&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-25T15:52:16.423" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6820" PostTypeId="1" AcceptedAnswerId="7077" CreationDate="2016-06-25T18:21:22.330" Score="1" ViewCount="2835" Body="&lt;p&gt;I want to install eOS but i already have an Arch install with grub2. Can i skip eOS's grub installation and use my existing one?&lt;/p&gt;&#xA;" OwnerUserId="5400" LastEditorUserId="5400" LastEditDate="2016-06-26T07:28:53.640" LastActivityDate="2016-07-27T10:30:19.677" Title="How can you install elementary OS without installing the bootloader?" Tags="|release-freya|system-installation|boot|grub|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6822" PostTypeId="1" CreationDate="2016-06-26T04:09:52.030" Score="1" ViewCount="757" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YkXSE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YkXSE.jpg&quot; alt=&quot;desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want to make the &lt;code&gt;vim a.txt&lt;/code&gt; to black and the background color of the title bar and the tab bar to silver.&lt;/p&gt;&#xA;" OwnerUserId="5403" LastActivityDate="2016-06-26T04:09:52.030" Title="Is it possible to change the window border color of terminal in freya?" Tags="|pantheon-terminal|themes|gtk|pantheon|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6823" PostTypeId="1" CreationDate="2016-06-26T05:59:07.077" Score="0" ViewCount="528" Body="&lt;p&gt;I have not been able to get Bluetooth to work on latest stable Freya. After many fixes, concoctions and terminal commands, the icon has since disappeared from the notification panel and clicking the bluetooth menu gives you only a toggle that does nothing else.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FBJsg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FBJsg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have checked rfkill list, bluetooth is running okay but I cannot get it to work. Please help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5406" LastActivityDate="2016-11-07T21:28:02.947" Title="Bluetooth disable &amp; visibility option greyed out" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6825" PostTypeId="1" CreationDate="2016-06-26T10:14:39.310" Score="0" ViewCount="366" Body="&lt;p&gt;This is a cross post from the &lt;a href=&quot;https://unix.stackexchange.com/questions/290844/dual-boot-windows-10-with-ubuntu&quot;&gt;Linux forum&lt;/a&gt; that maybe people can help me with&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I bought a new SSD and attempted to install elementary OS on it. When i reset the PC i do not get the option of booting into Elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a work around (based on the answe i am able to hit f2 and set the boot order to boot into the system but then i don't have access to windows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5407" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-09-26T23:26:25.427" Title="Dual Boot with Windows 10" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6826" PostTypeId="2" ParentId="3198" CreationDate="2016-06-26T10:47:57.960" Score="1" Body="&lt;p&gt;The X205TA it's a really nice notebook. I think you should try this link &lt;a href=&quot;https://github.com/lopaka/instructions/blob/master/ubuntu-16.04-install-asus-x205ta.md&quot; rel=&quot;nofollow&quot;&gt;ubuntu-16.04-install-asus-x205ta&lt;/a&gt;, reading some info on the web looks like this can work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;right now I'm runnin the live usb, the kernel is 3.19 the emmc and the wifi is not working, this is and maybe &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Asus/X205TA&quot; rel=&quot;nofollow&quot;&gt;debian reference instalation&lt;/a&gt; can help us (ñ_ñ).&lt;/p&gt;&#xA;" OwnerUserId="3286" LastEditorUserId="3286" LastEditDate="2016-06-26T17:38:21.043" LastActivityDate="2016-06-26T17:38:21.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6827" PostTypeId="2" ParentId="6820" CreationDate="2016-06-26T11:04:41.950" Score="0" Body="&lt;p&gt;I went ahead and installed it anyways. When prompted to select the location for the bootloader I went with the same drive I'm installing to, which had Arch and grub2 in it. The installation went well, and the previous grub2 was replaced, leaving me with all my old boot options with the addition of eOS.&lt;/p&gt;&#xA;" OwnerUserId="5400" LastActivityDate="2016-06-26T11:04:41.950" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6828" PostTypeId="1" CreationDate="2016-06-26T21:08:00.290" Score="11" ViewCount="37279" Body="&lt;p&gt;How can I install elementary tweaks on elementary OS 0.4 Loki Beta?&lt;/p&gt;&#xA;" OwnerUserId="5416" LastEditorUserId="37" LastEditDate="2016-06-28T10:13:21.960" LastActivityDate="2017-12-19T19:44:28.120" Title="How can I install elementary tweaks on Loki?" Tags="|release-loki|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6829" PostTypeId="2" ParentId="4642" CreationDate="2016-06-27T05:40:45.230" Score="1" Body="&lt;p&gt;Try to add &lt;code&gt;options snd-hda-intel model=,generic&lt;/code&gt; to &lt;code&gt;/etc/modprobe.d/modprobe.conf&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=184818#p1471463&quot; rel=&quot;nofollow&quot;&gt;Arch Linux Forums&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5418" LastEditorUserId="160" LastEditDate="2016-06-29T12:23:59.167" LastActivityDate="2016-06-29T12:23:59.167" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6830" PostTypeId="2" ParentId="6828" CreationDate="2016-06-27T14:00:55.837" Score="20" Body="&lt;p&gt;You can install &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;redesigned&lt;/a&gt; version elementary tweaks on Loki.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common --no-install-recommends&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://raw.githubusercontent.com/elementary-tweaks/elementary-tweaks/master/docs/screenshot.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://raw.githubusercontent.com/elementary-tweaks/elementary-tweaks/master/docs/screenshot.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note: please, read &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/38z164/what_is_the_elementary_teams_stance_on_elementary/crz5dsf/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary team's stance&lt;/a&gt; before installation tweaks.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2017-12-19T19:44:28.120" LastActivityDate="2017-12-19T19:44:28.120" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="6832" PostTypeId="1" CreationDate="2016-06-27T17:51:38.623" Score="1" ViewCount="129" Body="&lt;p&gt;I recently reinstalled Elementary OS (Freya 0.3.2) on my Laptop, but how ever the Networking seems not to work properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've got a &quot;Qualcomm Atheros AR9485 Wireless Network Adapter&quot; which gets detected by the system as &lt;i&gt; lspci &lt;/i&gt; shows, but in the Networksettings there isn't even a Wireless-Option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1578/unable-to-connect-to-own-wifi-network-freya&quot;&gt; article &lt;/a&gt; is what I found so far, the Output of &lt;i&gt; lshw -c network &lt;/i&gt; is the same as mine. I tried the given solutions, but that doesn't changed anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ethernet works just fine, but I would like to use wifi as before as well.&#xA;It isn't a problem with the router as the Ethernet-Connection shows and the system is completly newly setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if anybody has an idea how to fix that, I would appreciate the help.&lt;/p&gt;&#xA;" OwnerUserId="5423" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-27T06:37:18.717" Title="Network-Adapter doesn't get used by system" Tags="|release-freya|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6833" PostTypeId="1" CreationDate="2016-06-27T19:06:38.787" Score="2" ViewCount="9977" Body="&lt;p&gt;Firstly, i should say I'm an elementary os newbie.So I'm really sorry if my question is too basic, pretty please please be patient with me, I'd really appreciate your help.&#xA;I installed Elementary OS Freya 2 weeks ago, my first Linux based operating system. I had the usual pictures icon down on my desktop, but i was &quot;smart&quot; enough to try to install a program called &quot;gnome wallpaper slideshow&quot;. I got a warning that it gets into conflict with an already existing program or something like that (i think with the embedded photo viewer) but i ignored that warning and installed the program anyway. Now, when I try to open a .jpg (right click-open with...) i only get the option &quot;create background slideshow, and when i click on it nothing happens. I'd like to uninstall this program but i can't seem to find it anywhere. I'd really appreciate your help. I would like to be able and see .jpg files just like it should usually work in Elementary OS. Thank you for your help!&lt;/p&gt;&#xA;" OwnerUserId="5425" LastEditorUserId="16827" LastEditDate="2019-04-23T16:30:48.383" LastActivityDate="2019-04-23T16:30:48.383" Title="how can i uninstall a program in elementary os?(newbie)" Tags="|applications|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6834" PostTypeId="2" ParentId="2652" CreationDate="2016-06-27T19:18:34.353" Score="1" Body="&lt;p&gt;ATI Radeon Mobility 4670 + iMac? &lt;strong&gt;Forget about Linux working properly&lt;/strong&gt;, just use a VM in specific cases or think about getting another computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you can press F2 in rEFInd and  write radeon.modeset=0 if you really want to use it, but it's better not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's my desktop PC (unless I am on a late 2009), and it's resolved in AskUbuntu &lt;a href=&quot;https://askubuntu.com/posts/comments/1004327&quot;&gt;in my question&lt;/a&gt; of the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I like rEFInd, but it's not mandatory.&lt;/p&gt;&#xA;" OwnerUserId="5427" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-06-27T19:18:34.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6836" PostTypeId="2" ParentId="6817" CreationDate="2016-06-27T21:49:47.570" Score="1" Body="&lt;p&gt;That wifi adapter is based on Realtek 8192CU chipset,  with known bugs on Ubuntu and derivates. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can connect to inet from another pc, you must try to download a driver ported to kernel 3.13 and above, from the next address :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/pvaret/rtl8192cu-fixes&quot; rel=&quot;nofollow&quot;&gt;Github.com pvaret &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the. zip file and copy it to a usb drive to paste in your elementary OS pc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once it will be in your pc, extract and rename the folder as &lt;strong&gt;&quot;realtek8192cu-fixes&quot;&lt;/strong&gt;. Open panthon-files as root and paste this folder to &lt;strong&gt;&quot;/opt&quot;&lt;/strong&gt;. Open &lt;em&gt;Readme.md&lt;/em&gt; file inside the folder and follow the instructions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need some aditional help, you can comment this answer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to Readme.md file, I'll try to explain the installation steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open a terminal window or simply press &lt;kbd&gt;Ctrl&lt;/kbd&gt; and &lt;kbd&gt;T&lt;/kbd&gt; keys.&lt;/li&gt;&#xA;&lt;li&gt;Then you must execute: &lt;code&gt;sudo pantheon-files&lt;/code&gt; and put your password when you ask for it. Now you have opened Files as root.&lt;/li&gt;&#xA;&lt;li&gt;Copy &lt;code&gt;rtl8192cu-fixes&lt;/code&gt; folder to &lt;code&gt;/opt&lt;/code&gt; folder.&lt;/li&gt;&#xA;&lt;li&gt;From &lt;code&gt;/opt&lt;/code&gt; , click the right button mouse and choose &lt;code&gt;Open in ... Terminal&lt;/code&gt; option. Now you can see a new terminal window prompted to &lt;code&gt;/opt&lt;/code&gt; folder.&lt;/li&gt;&#xA;&lt;li&gt;Execute &lt;code&gt;sudo dkms add ./rtl8192cu-fixes&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;If an &lt;strong&gt;&lt;em&gt;unknown command&lt;/em&gt;&lt;/strong&gt; error appears, cause you haven't installed dkms , you can download to another computer the dkms trusty packages from: &lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/main/d/dkms/dkms_2.2.0.3-1.1ubuntu5.14.04.5_all.deb&quot; rel=&quot;nofollow&quot;&gt;Ubuntu trusty packages&lt;/a&gt;. Copy to elementary OS pc and install it with the command: &lt;code&gt;sudo dpkg -i dkms_2.2.0.3-1.1ubuntu5.14.04.5_all.deb&lt;/code&gt;. Try again with &lt;code&gt;sudo dkms add ./rtl8192cu-fixes&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Execute &lt;code&gt;sudo dkms install 8192cu/1.10&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Execute &lt;code&gt;sudo depmod -a&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Once your new driver is installed , remove your old one from boot with &lt;code&gt;sudo cp ./rtl8192cu-fixes/blacklist-native-rtl8192.conf /etc/modprobe.d/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;And finally you must disable power management executing &lt;code&gt;sudo cp ./rtl8192cu-fixes/8192cu-disable-power-management.conf /etc/modprobe.d/&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Reboot your system and try to connect via wifi to your rooter.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-06-29T15:14:42.463" LastActivityDate="2016-06-29T15:14:42.463" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6837" PostTypeId="2" ParentId="6833" CreationDate="2016-06-28T00:43:54.917" Score="2" Body="&lt;p&gt;go to the aplications menu (at the left of the top of your screen) and look for software center, from there you can install and uninstall a lot of things with just a click&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-06-28T00:43:54.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6838" PostTypeId="1" CreationDate="2016-06-28T05:06:48.067" Score="1" ViewCount="1631" Body="&lt;p&gt;I recently bought this old laptop of Panasonic CF-B10, and installed Elementary OS Freya. Everything works fine except one problem which is driving me crazy: the keyboard and touchpad are frozen after waking up from sleep.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if I use a USB mouse and USB keyboard I can still use the laptop, otherwise I would have to hard reboot the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some googling in the past few days, I have tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Reinstalling xserver-xorg-input-all packages;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Adding &quot;atkbd.reset&quot; to &quot;GRUB_CMDLINE_LINUX_DEFAULT=&quot; in /etc/default/grub  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Grubbing another SSD drive and installing the latest Ubuntu 16.04;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;and maybe something else. None of the above worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been using this system on multiple laptops and never met this problem before. I am hoping to get some help here. Any suggestion or advice will be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5430" LastEditorUserId="5430" LastEditDate="2016-06-28T05:19:12.627" LastActivityDate="2020-01-30T21:56:30.723" Title="Keyboard &amp; touchpad unresponsive after suspend" Tags="|keyboard|touchpad|suspend|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6840" PostTypeId="1" AcceptedAnswerId="6841" CreationDate="2016-06-28T11:03:04.250" Score="6" ViewCount="5998" Body="&lt;p&gt;I was previously wondering how I go about replacing the text at the top left of the &lt;a href=&quot;/questions/tagged/wingpanel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wingpanel&amp;#39;&quot; rel=&quot;tag&quot;&gt;wingpanel&lt;/a&gt; from 'Applications' to the official Elementary OS logo. I found a solution to this question posted on Reddit which I have posted below. I hope this helps anyone who hasn't previously found this answer.&lt;/p&gt;&#xA;" OwnerUserId="3943" LastEditorUserId="5565" LastEditDate="2016-10-06T02:34:00.937" LastActivityDate="2019-01-25T05:44:47.960" Title="How to replace wingpanel's &quot;Applications&quot; text with a icon in Freya" Tags="|release-freya|wingpanel|themes|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6841" PostTypeId="2" ParentId="6840" CreationDate="2016-06-28T11:03:48.943" Score="8" Body="&lt;p&gt;According to &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3fzd6s/tutorial_how_to_replace_the_applications_text_on&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryosnewbie's answer on Reddit&lt;/a&gt;. Thought it'd&#xA;be best to have this on the Elementary OS Stack Exchange. Big thanks&#xA;to him for sharing it. If this has already been posted I apologies for&#xA;the double post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how it looks: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/El2HI.png&quot; alt=&quot;Image 1&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TE0fF.png&quot; alt=&quot;Image 2&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yyLMn.png&quot; alt=&quot;Image 3&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open file manager up as administrator and go to: &lt;code&gt;/usr/share/themes/name-of-your-theme-folder/gtk-3.0&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Place the icon you want to use in that folder.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure the icon has proper permissions by right clicking on it, choosing &lt;code&gt;properties&lt;/code&gt; &gt; &lt;code&gt;more&lt;/code&gt; &gt; and making it &lt;code&gt;644-777&lt;/code&gt; (read, write, and&#xA;executable by owner, group, everyone) or else wingpanel may not load.&#xA;(Alternatively you could issue &lt;code&gt;chmod 777 &amp;lt;icon name&amp;gt;.svg&lt;/code&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open up &lt;code&gt;/usr/share/themes/name-of-your-theme-folder/gtk-3.0/apps.css&lt;/code&gt; in&#xA;Scratch, scroll down to the panel settings, find &lt;code&gt;.panel-app-button&lt;/code&gt;,&#xA;and change what's in the {brackets} to what's below. (Default theme:&#xA;&lt;code&gt;/usr/share/themes/elementary/gtk-3.0&lt;/code&gt; )&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel-app-button &amp;gt; GtkWidget &amp;gt; GtkWidget:first-child {&#xA;    padding: 0px 24px 0px 0px;&#xA;    font-size: 0px;&#xA;    background-image: url(&quot;icon.svg&quot;);&#xA;    background-repeat: no-repeat;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the background image URL to the name of the icon that you placed in the &lt;code&gt;gtk-3.0&lt;/code&gt; folder. The padding above is adjusted for a&#xA;24x24 icon but you can adjust it to fit something&#xA;bigger/smaller/wider, just change &quot;24px&quot; to the width of your image.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In terminal type: &lt;code&gt;killall wingpanel&lt;/code&gt; to see the changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Some icons you may like&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/s9Go3.png&quot; alt=&quot;&quot;&gt; - &lt;a href=&quot;https://i.stack.imgur.com/s9Go3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;bulls-eye&#xA;icon&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/7kd3x.png&quot; alt=&quot;&quot;&gt; - &lt;a href=&quot;https://i.stack.imgur.com/7kd3x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;apple&#xA;icon&lt;/a&gt; (Image may not be visible here&#xA;because its color matches the background here.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Search google for more&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.google.com/search?q=menu&amp;amp;tbs=isz:ex,iszw:24,iszh:24,ic:trans&amp;amp;tbm=isch&amp;amp;cad=h&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.google.com/search?q=menu&amp;amp;tbs=isz:ex,iszw:24,iszh:24,ic:trans&amp;amp;tbm=isch&amp;amp;cad=h&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3943" LastEditorUserId="5454" LastEditDate="2019-01-25T05:44:47.960" LastActivityDate="2019-01-25T05:44:47.960" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="6843" PostTypeId="2" ParentId="695" CreationDate="2016-06-28T20:46:00.130" Score="1" Body="&lt;p&gt;If you're dual booting, you might need to fully boot into Windows first (I'm just assuming its your primary OS), and do a proper restart into Elementary OS. I got this sometimes with other Linux distros because the disk didn't shut down properly&lt;/p&gt;&#xA;" OwnerUserId="5434" LastActivityDate="2016-06-28T20:46:00.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6844" PostTypeId="2" ParentId="6825" CreationDate="2016-06-28T21:19:45.340" Score="1" Body="&lt;p&gt;Run the LiveCD, or boot from USB again (whichever you did to install it). select the &quot;Try elementary OS&quot; option, Then in that session, connect to the internet and install boot repair.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install -y boot-repair&#xA;boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Do the recommended fix, to install Grub on your System. When grub is installed, feel free to reboot. When you reboot you should be brought to a page similar to this. &lt;a href=&quot;https://i.stack.imgur.com/S80yN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/S80yN.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There should be an option relating to windows (maybe multiple). Just try them all out (if there are multiple), and see which one boots you into Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Optional) When you figure it out, reboot back into Elementary OS,install Grub customizer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer&#xA;sudo apt-get update&#xA;sudo apt-get install grub-customizer&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and find the option that booted you into Windows, and then rename to to Windows (preferably), then hit save in the upper top left corner!&lt;/p&gt;&#xA;" OwnerUserId="5434" LastActivityDate="2016-06-28T21:19:45.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6846" PostTypeId="2" ParentId="6832" CreationDate="2016-06-29T04:39:59.560" Score="1" Body="&lt;p&gt;I had the same issue, but with a different wireless card. I have a Macbook Air with the Broadcom 4360 wireless card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instructions of &lt;a href=&quot;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&quot; rel=&quot;nofollow&quot;&gt;Ubuntu Community Wiki WifiDocs/Driver/bcm43xx page&lt;/a&gt;, and in particular, reinstalling the drivers using the following command solved my problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get --reinstall install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The same for your wireless card might solve the problem.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2016-06-29T04:39:59.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6847" PostTypeId="1" CreationDate="2016-06-29T14:17:35.520" Score="10" ViewCount="1299" Body="&lt;p&gt;I am using &lt;a href=&quot;https://www.insynchq.com/&quot; rel=&quot;noreferrer&quot;&gt;Insync&lt;/a&gt; for Gdrive syncronization. I can execute the service but I can not see the Icon anywhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any option to see that in the panel or task bar the same as you can see in other distributions?&lt;/p&gt;&#xA;" OwnerUserId="5440" LastEditorUserId="9" LastEditDate="2016-10-05T15:54:00.987" LastActivityDate="2018-09-18T14:33:51.913" Title="Can not see Insync Icon/App in Panel or Task Bar" Tags="|wingpanel|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6848" PostTypeId="1" CreationDate="2016-06-29T21:39:35.463" Score="0" ViewCount="255" Body="&lt;p&gt;I gained Elementary OS and I can not download it, please help.&#xA;Try to download from Midori and OS is 0.2.1 Elementary Luna.&lt;/p&gt;&#xA;" OwnerUserId="5443" LastEditorUserId="2629" LastEditDate="2016-08-04T15:45:43.840" LastActivityDate="2016-08-05T04:16:31.553" Title="I can not download Freya" Tags="|release-freya|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6849" PostTypeId="1" AcceptedAnswerId="6855" CreationDate="2016-06-29T23:47:17.633" Score="2" ViewCount="386" Body="&lt;p&gt;I would like to remove a lot of fonts that have come pre-installed with elementary os, as I wish to install fonts that I have purchased for design work instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What system fonts should not be deleted?&lt;/strong&gt; (i.e. Fonts that are required for the running of the operating system)&lt;/p&gt;&#xA;" OwnerUserId="2567" LastActivityDate="2016-06-30T13:11:55.047" Title="What system fonts should not be deleted?" Tags="|fonts|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6851" PostTypeId="1" CreationDate="2016-06-30T08:36:01.403" Score="-1" ViewCount="2139" Body="&lt;p&gt;I checked similar question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3101/upgrade-elementary-to-ubuntu-15-04-vivid-vervet&quot;&gt;here&lt;/a&gt; but not got an answer. &#xA;I upgraded to elementary os from ubuntu 16.04 and now want to migrate it back. Have anyone successfully done so?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;I don't know exactly how it got upgraded from ubuntu 16 to elementary os loki. I was just tryining pantheon-desktop . After installing I remember did apt dist-upgrade and magically had elementary os loki name writter in my next reboot instead of ubuntu 16&lt;/p&gt;&#xA;" OwnerUserId="5447" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-07-10T06:29:15.220" Title="Migrate back to Ubuntu" Tags="|updates|ubuntu|release-loki|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="6852" PostTypeId="1" CreationDate="2016-06-30T09:49:01.280" Score="0" ViewCount="7574" Body="&lt;p&gt;I've installed elementary OS on my pc and I need of PhotoShop (I like create layout site with PhotoShop). Can I install PhotoShop on elementary OS without virtual box?&lt;/p&gt;&#xA;" OwnerUserId="5344" LastEditorUserId="16827" LastEditDate="2019-04-13T13:33:23.673" LastActivityDate="2019-04-13T13:33:23.673" Title="Is it possible install Photoshop on elementary OS?" Tags="|software-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="6853" PostTypeId="2" ParentId="6852" CreationDate="2016-06-30T12:00:34.840" Score="2" Body="&lt;p&gt;Photoshop is a windows/mac program for which no linux version is available. However it might be possible to run it using wine. According to the &lt;a href=&quot;https://appdb.winehq.org/objectManager.php?sClass=version&amp;amp;iId=32438&amp;amp;iTestingId=90146&quot; rel=&quot;nofollow&quot;&gt;wine appdb&lt;/a&gt; other people have tried and had mixed results with it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative could be using &lt;a href=&quot;http://www.gimp.org/&quot; rel=&quot;nofollow&quot;&gt;gimp&lt;/a&gt; for which a linux version is available.&lt;/p&gt;&#xA;" OwnerUserId="124" LastActivityDate="2016-06-30T12:00:34.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6855" PostTypeId="2" ParentId="6849" CreationDate="2016-06-30T13:11:55.047" Score="4" Body="&lt;p&gt;&lt;strong&gt;Elementary OS System Fonts:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Default Font:   Droid Sans Regular&lt;/li&gt;&#xA;&lt;li&gt;Document Font:  Open Sans Regular&lt;/li&gt;&#xA;&lt;li&gt;Monospace Font: Droid Sans Mono Regular&lt;/li&gt;&#xA;&lt;li&gt;Titlebar Font:  Droid Sans Bold&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I recommend you to save all system fonts in a separate directory if something fails.&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-06-30T13:11:55.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6856" PostTypeId="2" ParentId="6851" CreationDate="2016-06-30T13:40:10.090" Score="0" Body="&lt;p&gt;There is no option for downgrading by default. A fresh install is always the best solution. Downgrading is possible but very problematic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/49869/how-to-roll-back-ubuntu-to-a-previous-version/49872#49872&quot;&gt;How to roll back ubuntu to a previous version&lt;/a&gt;   &lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-06-30T13:40:10.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6860" PostTypeId="2" ParentId="6851" CreationDate="2016-06-30T21:30:39.157" Score="1" Body="&lt;p&gt;The latest version of elementary (0.3 Freya) is based upon ubuntu 14.04 Trusty LTS so I'm not sure a &quot;downgrade&quot; is really what you are after here as you haven't strictly &quot;upgraded&quot; in the first place. eOS is a different &quot;flavour&quot; of Linux, it's more of a cousin of ubuntu 16.04 Xenial than it's progeny.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you took Ubuntu and installed various packages such as &lt;code&gt;pantheon-desktop&lt;/code&gt;, &lt;code&gt;midori&lt;/code&gt; browser, or &lt;code&gt;scratch-text-editor&lt;/code&gt; you may be able to use &lt;code&gt;sudo apt-get remove &amp;lt;package&amp;gt;&lt;/code&gt; to remove these and restore the ubunty unity desktop, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you installed elementary from a bootable USB, this is a fresh install and you would need to repeat this entire process with a bootable ubuntu USB. Note that it is &lt;em&gt;highly recommended&lt;/em&gt; to &lt;strong&gt;back up your files&lt;/strong&gt; before proceeding with this.&lt;/p&gt;&#xA;" OwnerUserId="5205" LastActivityDate="2016-06-30T21:30:39.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6861" PostTypeId="2" ParentId="4398" CreationDate="2016-07-01T00:02:29.583" Score="2" Body="&lt;p&gt;if you can access to the command line just put this commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge xorg-driver-fglrx fglrx*&#xA;sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core&#xA;sudo reconfigure xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need more info you can check the ubuntu wiki post about graphic drivers &lt;a href=&quot;https://wiki.ubuntu.com/X/Troubleshooting/VideoDriverDetection?action=show&amp;amp;redirect=X%2FTroubleshooting%2FFglrxInteferesWithRadeonDriver&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-07-01T00:02:29.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6863" PostTypeId="2" ParentId="6848" CreationDate="2016-07-01T00:17:22.743" Score="0" Body="&lt;p&gt;just go to the oficial web &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/&lt;/a&gt; and select the price you want to pay or simply type how much you think elementary OS cost in the custom box  and click in the download button.&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-07-01T00:17:22.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6864" PostTypeId="1" CreationDate="2016-07-01T01:51:15.803" Score="1" ViewCount="53" Body="&lt;p&gt;I need to know how to put an accent in Elementary OS &#xA;I have a QWERTY keyboard in spanish, please help me!&lt;/p&gt;&#xA;" OwnerUserId="5452" LastActivityDate="2016-10-16T20:55:27.277" Title="I have my password with an accent and i can't put them" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6865" PostTypeId="2" ParentId="6848" CreationDate="2016-07-01T06:51:47.573" Score="1" Body="&lt;p&gt;You can download Elementary OS Freya (the latest stable release) from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;the main Elementary webpage&lt;/a&gt;. They ask for a donation but you can also download and try it out for free but clicking &lt;code&gt;Custom&lt;/code&gt;, entering $0, and clicking &lt;code&gt;Purchase&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1PIOz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1PIOz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest way to install Elementary is to use this downloaded ISO file to create a &quot;bootable USB&quot;, these instructions show you how to create one depending on your current operating system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;Create Elementary USB on Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.ubuntu.com/download/desktop/create-a-usb-stick-on-windows&quot; rel=&quot;nofollow noreferrer&quot;&gt;Create Elementary USB on Windows&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply reboot your machine with this USB drive plugged in and it should boot off the USB into Elementary OS. This distribution has Midori, the Pantheon desktop, terminal, and scratch text editor built in. You can install from this USB drive (including dual boot configuration options) and install additional packages from the Ubuntu Software Centre or try out the OS by running it directly from the USB. &lt;/p&gt;&#xA;" OwnerUserId="5205" LastActivityDate="2016-07-01T06:51:47.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6866" PostTypeId="1" AcceptedAnswerId="8358" CreationDate="2016-07-01T07:39:54.470" Score="6" ViewCount="788" Body="&lt;p&gt;Anyway to install &lt;a href=&quot;http://gnomepomodoro.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gnome-pomodoro&lt;/a&gt; on ElementaryOS. I really like their feature. I found this: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/384/is-there-a-countdown-timer-application-for-elementary-os/386#386&quot;&gt;Is there a countdown timer application for elementary OS?&lt;/a&gt; but this does not really have the feature I like. &lt;/p&gt;&#xA;" OwnerUserId="3733" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-30T04:37:51.880" Title="Install Gnome-Pomodoro" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6867" PostTypeId="1" CreationDate="2016-07-01T12:19:51.657" Score="0" ViewCount="391" Body="&lt;p&gt;I'm currently trying out Loki, and it's running quite fine as far as I see. Only real annoyance: Firefox is currently showing a bug. &#xA;If I open a Filechooser in Firefox, no matter if its for saving a page, uploading a file to a site,etc...nothing can be selected. You can browse all folders, navigate through them, highlight an entry, but the options to select an entry are missing. Literally: there is no OK Button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any others experiencing this?&lt;/p&gt;&#xA;" OwnerUserId="2504" LastActivityDate="2016-08-18T20:45:35.190" Title="Firefox Filechooser Dialogs don't have a select/save button in Loki" Tags="|gtk|firefox|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-13T18:52:38.880" ContentLicense="CC BY-SA 3.0" />
  <row Id="6869" PostTypeId="1" CreationDate="2016-07-01T15:31:08.063" Score="0" ViewCount="61" Body="&lt;p&gt;I tried to upgrade the mesa package using the ppa ppa:oibaf/graphics-drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there comes this error message while upgrading essential packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following packages have unmet dependencies:&#xA;gnome-control-center : Depends: libcheese-gtk23 (&gt;= 3.4.0) but it is not going to be installed&#xA;                        Depends: libcheese7 (&gt;= 3.0.1) but it is not going to be installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried sudo apt-get install libcheese-gtk23 libcheese7, but it says its already the latest version and the version numbers satisfy the error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do about this problem.&lt;/p&gt;&#xA;" OwnerUserId="5459" LastActivityDate="2016-09-29T19:47:41.233" Title="Problem Updating MESA" Tags="|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6870" PostTypeId="1" CreationDate="2016-07-01T16:29:22.383" Score="0" ViewCount="275" Body="&lt;p&gt;I am using Elementary OS Freya with generic kernel 3.19&#xA;I couldn't able to use my card reader. Nothing happens when I insert a card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lsusb&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 003: ID 093a:3701 Pixart Imaging, Inc. &#xA;Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 004: ID 05c8:030d Cheng Uei Precision Industry Co., Ltd (Foxlink) &#xA;Bus 001 Device 003: ID 13d3:3286 IMC Networks &#xA;Bus 001 Device 008: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader&#xA;Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;dmesg output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ 1259.152178] usb 1-1.1: new high-speed USB device number 9 using ehci-pci&#xA;[ 1259.246192] usb 1-1.1: New USB device found, idVendor=058f, idProduct=6366&#xA;[ 1259.246198] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3&#xA;[ 1259.246203] usb 1-1.1: Product: Mass Storage Device&#xA;[ 1259.246206] usb 1-1.1: Manufacturer: Generic&#xA;[ 1259.246210] usb 1-1.1: SerialNumber: 058F63666433&#xA;[ 1259.246619] usb-storage 1-1.1:1.0: USB Mass Storage device detected&#xA;[ 1259.246803] scsi host10: usb-storage 1-1.1:1.0&#xA;[ 1260.374288] scsi 10:0:0:0: Direct-Access     Multiple Card  Reader     1.00 PQ: 0 ANSI: 0&#xA;[ 1260.374842] sd 10:0:0:0: Attached scsi generic sg2 type 0&#xA;[ 1262.042005] sd 10:0:0:0: [sdb] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)&#xA;[ 1262.043071] sd 10:0:0:0: [sdb] Write Protect is off&#xA;[ 1262.043075] sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00&#xA;[ 1262.044119] sd 10:0:0:0: [sdb] No Caching mode page found&#xA;[ 1262.044127] sd 10:0:0:0: [sdb] Assuming drive cache: write through&#xA;[ 1266.149979] sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE&#xA;[ 1266.149988] sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]&#xA;[ 1266.149997] sd 10:0:0:0: [sdb] &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASC=0xff &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASCQ=0xff&#xA;[ 1266.150000] sd 10:0:0:0: [sdb] CDB: &#xA;[ 1266.150003] Read(10): 28 00 00 00 00 00 00 00 08 00&#xA;[ 1266.150012] blk_update_request: I/O error, dev sdb, sector 0&#xA;[ 1266.150017] buffer_io_error: 18 callbacks suppressed&#xA;[ 1266.150020] Buffer I/O error on dev sdb, logical block 0, async page read&#xA;[ 1267.688688] sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE&#xA;[ 1267.688698] sd 10:0:0:0: [sdb] Sense Key : Unit Attention [current]&#xA;[ 1267.688704] sd 10:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed&#xA;[ 1267.688707] sd 10:0:0:0: [sdb] CDB: &#xA;[ 1267.688710] Read(10): 28 00 00 00 00 00 00 00 08 00&#xA;[ 1267.688723] blk_update_request: I/O error, dev sdb, sector 0&#xA;[ 1267.688729] Buffer I/O error on dev sdb, logical block 0, async page read&#xA;[ 1267.688786] ldm_validate_partition_table(): Disk read failed.&#xA;[ 1267.688826] Dev sdb: unable to read RDB block 0&#xA;[ 1267.688874]  sdb: unable to read partition table&#xA;[ 1267.692495] sd 10:0:0:0: [sdb] Attached SCSI removable disk&#xA;[ 1271.799765] sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE&#xA;[ 1271.799775] sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]&#xA;[ 1271.799783] sd 10:0:0:0: [sdb] &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASC=0xff &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASCQ=0xff&#xA;[ 1271.799786] sd 10:0:0:0: [sdb] CDB: &#xA;[ 1271.799790] Read(10): 28 00 00 00 00 00 00 00 08 00&#xA;[ 1271.799800] blk_update_request: I/O error, dev sdb, sector 0&#xA;[ 1271.799806] Buffer I/O error on dev sdb, logical block 0, async page read&#xA;[ 1273.338295] sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE&#xA;[ 1273.338304] sd 10:0:0:0: [sdb] Sense Key : Unit Attention [current]&#xA;[ 1273.338309] sd 10:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed&#xA;[ 1273.338312] sd 10:0:0:0: [sdb] CDB: &#xA;[ 1273.338315] Read(10): 28 00 00 00 00 00 00 00 08 00&#xA;[ 1273.338325] blk_update_request: I/O error, dev sdb, sector 0&#xA;[ 1273.338330] Buffer I/O error on dev sdb, logical block 0, async page read&#xA;[ 1273.338387] ldm_validate_partition_table(): Disk read failed.&#xA;[ 1273.338426] Dev sdb: unable to read RDB block 0&#xA;[ 1273.338457]  sdb: unable to read partition table&#xA;[ 1274.931516] sd 10:0:0:0: [sdb] FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE&#xA;[ 1274.931524] sd 10:0:0:0: [sdb] Sense Key : Not Ready [current]&#xA;[ 1274.931533] sd 10:0:0:0: [sdb] &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASC=0xff &amp;lt;&amp;lt;vendor&amp;gt;&amp;gt; ASCQ=0xff&#xA;[ 1274.931536] sd 10:0:0:0: [sdb] CDB: &#xA;[ 1274.931539] Read(10): 28 00 00 00 00 00 00 00 08 00&#xA;[ 1274.931549] blk_update_request: I/O error, dev sdb, sector 0&#xA;[ 1274.931554] Buffer I/O error on dev sdb, logical block 0, async page read&#xA;[ 1274.932851] ldm_validate_partition_table(): Disk read failed.&#xA;[ 1274.932859] Dev sdb: unable to read RDB block 0&#xA;[ 1274.934470]  sdb: unable to read partition table&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help will be appreciated. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5460" LastEditorUserId="578" LastEditDate="2016-12-16T06:51:30.067" LastActivityDate="2023-12-11T16:00:55.090" Title="Alcor card reader problem" Tags="|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6872" PostTypeId="2" ParentId="6869" CreationDate="2016-07-01T17:36:02.777" Score="1" Body="&lt;p&gt;freya 0.3.2 uses ubuntu lts 14.04.2 as base and the ppa ppa:oibaf/graphics-drivers don't support that ubuntu version, thats why is showing you those errors&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-07-01T17:36:02.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6873" PostTypeId="2" ParentId="6866" CreationDate="2016-07-02T01:27:01.117" Score="0" Body="&lt;p&gt;It should work if you download it for Ubuntu. elementary OS is based on Ubuntu 14.04 so most programs also work on elementary OS&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-07-02T01:27:01.117" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6875" PostTypeId="1" AcceptedAnswerId="6878" CreationDate="2016-07-02T14:22:28.627" Score="8" ViewCount="3578" Body="&lt;p&gt;I installed Redshift 1.11 on Elementary OS Freya but I noticed that the methods list only mentioned the dummy method (which just displays the target gamma in the terminal). &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ redshift -m list&#xA;Available adjustment methods:&#xA;  dummy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This makes it kind of useless...&#xA;So I cloned the source, ran &lt;code&gt;./bootstrap&lt;/code&gt; and then &lt;code&gt;./configure&lt;/code&gt;. This indicated that it wouldn't have any of the adjustment methods: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Adjustment methods:&#xA;DRM:        no&#xA;RANDR:      no&#xA;VidMode:        no&#xA;Quartz (OSX):   no&#xA;WinGDI (Windows):   no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Above it, it indicated missing dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;checking whether to enable RANDR method... missing dependencies&#xA;checking whether to enable VidMode method... missing dependencies&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The github repo's Hacking docs lists the &lt;a href=&quot;https://github.com/jonls/redshift/blob/master/HACKING.md#dependencies&quot; rel=&quot;noreferrer&quot;&gt;dependencies&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;libxcb, libxcb-randr (Optional, for RandR support) &lt;/li&gt;&#xA;&lt;li&gt;libX11, libXxf86vm&#xA;(Optional, for VidMode support)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;These packages I need for Randr or vidmode are not found though. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install libxcb libxcb-randr&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Unable to locate package libxcb&#xA;E: Unable to locate package libxcb-randr&#xA;&#xA;$ sudo apt-get install libX11 libXxf86vm&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Unable to locate package libX11&#xA;E: Unable to locate package libXxf86vm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm not sure how to continue. Does anyone have any tips / leads? &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2023-03-23T05:19:48.157" Title="Using Redshift on Elementary OS" Tags="|software-installation|dependencies|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6876" PostTypeId="2" ParentId="6875" CreationDate="2016-07-02T21:06:24.890" Score="4" Body="&lt;p&gt;You can install &lt;code&gt;redshift&lt;/code&gt; from repository ufficial of Ubuntu/Elementary OS.&#xA;Just run it in your terminal:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;$ sudo apt-get install redshift redshift-gtk&lt;/p&gt;&#xA;&lt;p&gt;$ sudo apt-get install libxcb1-dev libxcb-randr0-dev libx11-dev&lt;/p&gt;&#xA;&lt;p&gt;$ sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;$ redshift&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I've run it and work!&lt;/p&gt;&#xA;&lt;p&gt;You can use &lt;code&gt;redshift -h&lt;/code&gt; for help, and you can run &lt;code&gt;redshift -m list &lt;/code&gt; and use &lt;code&gt;randr/vidmode&lt;/code&gt;.&#xA;&lt;br&gt;&#xA;For other help you can use documentation from terminal with &lt;code&gt;man redshift&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5344" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-07-02T21:22:24.160" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6878" PostTypeId="2" ParentId="6875" CreationDate="2016-07-03T03:07:12.340" Score="1" Body="&lt;p&gt;This is what worked for me:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download latest source from &lt;a href=&quot;https://github.com/jonls/redshift/releases/download/v1.11/redshift-1.11.tar.xz&quot; rel=&quot;nofollow noreferrer&quot;&gt;the GitHub repository&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install the required libraries:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libxcb1-dev libxcb-randr0-dev libx11-dev intltool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Go to extracted redshift folder, then run these commands:&#xA;&lt;pre&gt;&lt;code&gt;./configure --prefix=$HOME/redshift/root --with-systemduserunitdir=$HOME/.config/systemd/user  --enable-randr&#xA;make; sudo make install&#xA;~/redshift/root/bin/redshift -l your_latitude:your_longitude&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt; &lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add the last line to your startup application list&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2359" LastEditorUserId="25612" LastEditDate="2023-03-23T05:19:48.157" LastActivityDate="2023-03-23T05:19:48.157" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="6879" PostTypeId="1" CreationDate="2016-07-03T03:36:39.770" Score="-1" ViewCount="916" Body="&lt;p&gt;Is it possible set a simple and light windows bar? ...below the dock or in another site (in taskbar)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HJvoG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HJvoG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5008" LastActivityDate="2016-07-04T17:46:49.443" Title="Is it possible set a windows bar?" Tags="|desktop|pantheon|plank|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6880" PostTypeId="2" ParentId="6879" CreationDate="2016-07-03T09:41:54.153" Score="1" Body="&lt;h1&gt;&#xA;About install KDE or other DE&#xA;&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You can install KDE/GNOME on Elementary OS, but this isn't recommended, if you want use GNOME install Ubuntu, if you want use KDE install KUBUNTU etc.&#xA;Anyway, you can install KDE with this guide, works for Ubuntu and Elementary OS, &lt;a href=&quot;https://itsfoss.com/install-kde-plasma-ubuntu-1410/&quot; rel=&quot;nofollow noreferrer&quot;&gt;INSTALL KDE PLASMA 5.2 IN UBUNTU 14.04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;&#xA;Alternative&#xA;&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You can put the bottom bar in Elementary OS without install other DE, you have to install &lt;code&gt;Enlightenment&lt;/code&gt;, you can look this photo and watch the bottom bar.&#xA;&lt;img src=&quot;https://2.bp.blogspot.com/-1HfJbtaKkBE/VB7D7AWuzMI/AAAAAAAAJ-U/6BCnYIXlsSg/s1600/enlightenment-19-3.jpg&quot; /&gt;&#xA;You cao&#xA;&lt;li&gt;Go on Log out.&#xA;&lt;li&gt;Click your user and click the gear in top right in the box and select &lt;code&gt;Enlightenment&lt;/code&gt;.&#xA;&lt;li&gt; Enter your password.&#xA;&#xA;Here you will have &lt;code&gt;Enlightenment&lt;/code&gt;.&#xA;If you don't found option &lt;code&gt;Enlightenment&lt;/code&gt; use this commands:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo add-apt-repository ppa:enlightenment-git/ppa&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;apt-get update&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo apt-get install e20&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5344" LastEditorUserId="-1" LastEditDate="2017-03-10T09:42:42.680" LastActivityDate="2016-07-03T09:41:54.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6882" PostTypeId="2" ParentId="6762" CreationDate="2016-07-03T17:52:31.610" Score="0" Body="&lt;p&gt;Well, I had to reinstall windows and &lt;em&gt;then&lt;/em&gt; get Elementary OS. It worked. If anyone tries this, make sure you back up your files so you don't lose anything important.&lt;/p&gt;&#xA;" OwnerUserId="5353" LastActivityDate="2016-07-03T17:52:31.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6883" PostTypeId="1" CreationDate="2016-07-04T05:16:37.873" Score="3" ViewCount="47" Body="&lt;p&gt;I was able to run Luna well off on an old PC. But the stable release Freya is lagging making it unusable. I don't have the ISO for Luna to go back to the old state. Could anyone tell me where I could find one? &lt;/p&gt;&#xA;" OwnerUserId="5479" LastActivityDate="2016-07-04T05:16:37.873" Title="Luna ISO needed" Tags="|luna|iso|" AnswerCount="0" CommentCount="3" ClosedDate="2016-08-16T00:24:59.277" ContentLicense="CC BY-SA 3.0" />
  <row Id="6884" PostTypeId="2" ParentId="695" CreationDate="2016-07-04T06:38:24.177" Score="-1" Body="&lt;p&gt;I has same issue yesterday.&#xA;I reinstalled but this time didn't select the option to download and install updates during process and it was fine.&#xA;I let it update once finished and it was fine. &#xA;Might be worth a try .&lt;/p&gt;&#xA;" OwnerUserId="5480" LastActivityDate="2016-07-04T06:38:24.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6885" PostTypeId="1" AcceptedAnswerId="6938" CreationDate="2016-07-04T11:14:40.940" Score="2" ViewCount="2205" Body="&lt;p&gt;I tried to install Elementary OS Loki on my dell XPS 13 (8350) as Freya didn't support the Broadcom BCM4350 wifi card. This card works out of the box with Ubuntu 16.04, but isn't recognized by Loki. How is it possible ? Note that I tried several distrib based on Ubuntu 16.04, and none seems to recognize or make the wifi card works well, which is very strange because as I said, it works really fine with a classic Ubuntu 16.04 install. Did someone managed to get wifi work on XPS 13 (8350) with Loki (or Freya) ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Arnaud&lt;/p&gt;&#xA;" OwnerUserId="5481" LastActivityDate="2016-07-11T01:05:40.800" Title="XPS 13 (9350) wifi issue in Loki (but not in Ubuntu 16.04)" Tags="|wifi|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6886" PostTypeId="2" ParentId="5472" CreationDate="2016-07-04T13:30:09.583" Score="-1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OfABq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OfABq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For someone who have problem with rbenv and bashrs, this code is worked for me. (We need 'enter' between esac and export)&lt;/p&gt;&#xA;" OwnerUserId="5483" LastActivityDate="2016-07-04T13:30:09.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6887" PostTypeId="1" AcceptedAnswerId="6890" CreationDate="2016-07-04T15:33:13.840" Score="0" ViewCount="85" Body="&lt;p&gt;I install elementary OS on desktop PC. My hard-disk was 500 GB but I make 70 GB Primary and 3.8 swap partition. I kept rest as unallocated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS is installed now I like to make second partition where I can put my data. I used GParted to make partition after booting OS but I could not save anything on it&lt;/p&gt;&#xA;" OwnerUserId="5455" LastActivityDate="2016-07-04T19:33:07.490" Title="Create another partition" Tags="|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6888" PostTypeId="1" AcceptedAnswerId="8118" CreationDate="2016-07-04T16:17:13.457" Score="1" ViewCount="282" Body="&lt;p&gt;Unlike in panels that look similar from other desktops (Ubuntu Unity, Cinnamon, etc), &lt;strong&gt;left and right clicking the panel icons shows the same menu&lt;/strong&gt; options. This is true for 'systray' icons of all applications (Skype, uGet, Dropbox, Kazam, Clementine, VLC etc) as well as for system options icons on the panel (keyboard layout, volume/sound, network, battery, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But &lt;strong&gt;clicking an option in the menu does not work unless it is done with the same mouse button that was used to show the menu in the first place&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There seem to be two odd things here:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;right or left click on the same panel icon shows exactly the same menu with the same options&lt;/li&gt;&#xA;&lt;li&gt;once the menu is shown, the selection cannot be done anymore with the left click in all cases, but only if the icon was left-clicked in the first place.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This is a problem sometimes because it is common behavior in all desktop environments and all operating systems that I have used (Linux but also Mac and Windows) to be able to left-click on a menu that was triggered with a right click on a panel or tray icon (also when right-clicking the Plank dock icons), and I am very used to that and find it annoying to click again on many occasions: while right-clicking a panel icon seems normal behavior, and a menu appears as expected, in order to use that menu one has to continue right-clicking inside the menu too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the gif below: that's what happens in the following cases: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;menu triggered by left-clicking on the keyboard layout icon, left-click on the menu (option followed); then, menu triggered by left-clicking on the keyboard layout icon, right-click on the menu (option not followed)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;menu triggered by right-clicking on the keyboard layout icon, right-click on the menu (option followed); menu triggered by right-clicking on the keyboard layout icon, left-click on the menu (option not followed)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/laZcb.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/laZcb.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Is this a setting that can be adjusted somehow? - Or, if a bug, is there some way to change this behavior?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In fact the description above should be adjusted a bit: left or right clicking &lt;strong&gt;anywhere&lt;/strong&gt; in the 'systray' area (in fact the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4227/170&quot;&gt;Ayatana Indicator&lt;/a&gt;) brings forth a context-menu and then one can move the mouse on that panel area and different context-menus will be shown for the different applications/applets. For all such context-menus the behavior described above will appear: only the mouse button that was initially used to click on that panel area can be used to select an option within &lt;strong&gt;any&lt;/strong&gt; of those context-menus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y1PzQ.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y1PzQ.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-23T20:40:03.377" Title="Left and right click on panel icons shows the same context-menu that works only if clicked with the same mouse button that triggered the menu" Tags="|release-freya|wingpanel|icons|mouse|menu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6889" PostTypeId="2" ParentId="6879" CreationDate="2016-07-04T17:46:49.443" Score="0" Body="&lt;p&gt;you can try with tint2&#xA;&lt;a href=&quot;https://apps.ubuntu.com/cat/applications/precise/tint2/&quot; rel=&quot;nofollow&quot;&gt;https://apps.ubuntu.com/cat/applications/precise/tint2/&lt;/a&gt;&#xA;is lightweight and simple&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-07-04T17:46:49.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6890" PostTypeId="2" ParentId="6887" CreationDate="2016-07-04T19:33:07.490" Score="2" Body="&lt;p&gt;You have the partition, but you can't put files on it? You need to change the owner of the partition, like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown YOURNAME:YOURNAME /path/to/your/partition&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, I had done this with my partition:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown aleksandar:aleksandar /media/aleksandar/4208aaf4-cd67-486b-a91a-bfe48ecb1792&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-07-04T19:33:07.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6894" PostTypeId="1" CreationDate="2016-07-05T02:39:40.687" Score="0" ViewCount="169" Body="&lt;p&gt;I have to input the username and password everytime I use the samba service.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I close the pantheon-files at the samba directory, the next time I open it, it will ask for my password twice, it is so annoying.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="578" LastEditDate="2017-02-10T14:20:18.430" LastActivityDate="2017-07-10T19:51:41.980" Title="Pantheon-files just can't remember my samba password" Tags="|pantheon-files|samba|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6897" PostTypeId="1" CreationDate="2016-07-05T11:39:04.727" Score="2" ViewCount="505" Body="&lt;p&gt;I installed Hipchat on my ElementaryOS system. I am on 0.3 Freya.&#xA;In the status bar is this icon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WniAc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WniAc.png&quot; alt=&quot;Wingpanel Icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I fix this myself or do I have to write the developer of hipchat?&#xA;I would be okay if the icon will be hidden, just like this it is a bit ugly.&lt;/p&gt;&#xA;" OwnerUserId="3980" LastActivityDate="2016-08-07T06:03:10.230" Title="How to fix broken/wrong wingpanel icon" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6899" PostTypeId="2" ParentId="6718" CreationDate="2016-07-05T14:49:54.613" Score="3" Body="&lt;p&gt;You can try &lt;a href=&quot;http://www.teejeetech.in/p/aptik.html&quot; rel=&quot;nofollow&quot;&gt;Aptik Migration Utility&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -y ppa:teejee2008/ppa &#xA;sudo apt update &#xA;sudo apt install aptik &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastEditorUserId="26" LastEditDate="2016-09-25T09:22:46.793" LastActivityDate="2016-09-25T09:22:46.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6902" PostTypeId="1" CreationDate="2016-07-05T18:29:36.960" Score="1" ViewCount="41" Body="&lt;p&gt;I've been experiencing a problem with OBS recently, as it was adding horrible screen tearing to videos in certain applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=zfOev4G0WOg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here's a video example.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However today I took a screenshot, and I caught a very similar screen tear in that screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.imgur.com/6Bs7ITs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;Screenshot.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas what might be causing this? These tears are invisible, but are driving me up the wall when it comes to recording videos.&lt;/p&gt;&#xA;" OwnerUserId="1228" LastEditorUserId="26" LastEditDate="2016-09-25T17:09:32.447" LastActivityDate="2016-09-25T17:09:32.447" Title="Screen tears getting caught in various places" Tags="|gala|screenshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6907" PostTypeId="1" CreationDate="2016-07-06T08:52:13.577" Score="3" ViewCount="5885" Body="&lt;p&gt;I have a problem regarding installation elementary OS on virtual machine using Hyper-V&lt;a href=&quot;https://i.stack.imgur.com/17bND.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/17bND.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am green at using Linux, it is supposed to be my linux distro exclusively for Ruby(on Rails) development. I suppose it could be that elementary is BIOS based and Windows 10 is UEFI based. How do I solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="5497" LastEditorUserId="26" LastEditDate="2016-09-25T17:04:55.487" LastActivityDate="2019-02-15T13:51:59.307" Title="Does elementary OS work inside Hyper-V?" Tags="|system-installation|microsoft-windows|virtualization|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6908" PostTypeId="1" CreationDate="2016-07-06T12:24:27.090" Score="0" ViewCount="972" Body="&lt;p&gt;Need to know if can run elementary OS on single board computers based on ARM Cortex A series chips, like the Raspberry PI 2, 3. Really like the look and feel of your OS, and would be great if can get it running on ARM based hardware.&#xA;Regards,&#xA;Vibhas K. Dhingra&#xA;vibhas.kdhingra@gmail.com&lt;/p&gt;&#xA;" OwnerUserId="5499" LastActivityDate="2016-10-04T18:03:47.837" Title="Running elementary on ARM single board computers" Tags="|system|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-05T19:24:31.113" ContentLicense="CC BY-SA 3.0" />
  <row Id="6909" PostTypeId="2" ParentId="6908" CreationDate="2016-07-06T16:10:36.797" Score="0" Body="&lt;p&gt;There are no ARM images at the moment. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend Ubuntu Mate for Raspberry PI. With some tweaks you'll get the same user interface like in Elementary OS. For the full Elementary OS experience you need to switch to x86-64.&lt;/p&gt;&#xA;" OwnerUserId="3747" LastActivityDate="2016-07-06T16:10:36.797" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6910" PostTypeId="1" CreationDate="2016-07-06T17:17:21.630" Score="1" ViewCount="119" Body="&lt;p&gt;greetings from China.I am using Hasee K540D i5-D2 which includes &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i5-4210M &lt;/li&gt;&#xA;&lt;li&gt;nVidia GT940M/Intel® HD Graphics 4600&lt;/li&gt;&#xA;&lt;li&gt;Mobile Intel® HM86 Chipset&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I've install elemntary OS freya for a while and everything works fine except the battery indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed the same version in my Thinkpad X230 it has the battery indicator,but not my Hasee.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I cannot use any command line to check the how many battery left as I dont have the battery folder.It just cannot detect my battery.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However it can be charge,I can start up and my Hasee with only battery.I am really confused,are there any solutions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/puc1I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/puc1I.png&quot; alt=&quot;using my battery &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/snLHA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/snLHA.png&quot; alt=&quot;no battery indicator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5500" LastActivityDate="2016-07-06T17:17:21.630" Title="no battery indicator in my statue bar and also there is no battery folder" Tags="|battery|" AnswerCount="0" CommentCount="0" ClosedDate="2016-08-02T16:12:45.413" ContentLicense="CC BY-SA 3.0" />
  <row Id="6912" PostTypeId="1" CreationDate="2016-07-07T01:56:29.847" Score="0" ViewCount="1804" Body="&lt;p&gt;I'm having the same problem as this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6652/not-an-official-elementary-package&quot;&gt;question&lt;/a&gt; but am unable to upvote or comment on it; does anyone have a fix or suggestions? I downloaded the OS from the elementary site but the installer keeps crashing (I notice at the &lt;code&gt;running grub-install /dev/sda&lt;/code&gt; step), and when it tries to collect information to file a report, it tells me that it's not an official elementary package and to remove any third party package.&lt;/p&gt;&#xA;" OwnerUserId="5504" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-06T10:15:56.213" Title="Installer keeps crashing" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6914" PostTypeId="1" CreationDate="2016-07-07T14:58:39.400" Score="1" ViewCount="878" Body="&lt;p&gt;I have a bunch of browsers installed and they all show up as browsers in the system settings. All of them except for Chrome. I've tried reinstalling and uninstalling and re-installing and neither seems to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could anyone offer advice on how I might fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the screen I'm talking about:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/omdR6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/omdR6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2683" LastActivityDate="2016-09-07T11:09:55.547" Title="Why can't I select Google Chrome as default browser in application settings?" Tags="|applications|settings|google-chrome|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6915" PostTypeId="2" ParentId="6912" CreationDate="2016-07-07T15:08:02.550" Score="1" Body="&lt;p&gt;Well, the installation worked once I opted to manually choose my partitions and changed the boot loader to my swap partition rather than &lt;code&gt;/dev/sda&lt;/code&gt;. This seems to be a problem facing Ubuntu users in general: &lt;a href=&quot;https://askubuntu.com/questions/459620/unable-to-install-grub-in-dev-sda-when-installing-grub&quot;&gt;https://askubuntu.com/questions/459620/unable-to-install-grub-in-dev-sda-when-installing-grub&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5504" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-07-07T15:08:02.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6916" PostTypeId="1" CreationDate="2016-07-07T15:59:48.540" Score="0" ViewCount="1902" Body="&lt;p&gt;I use a tool named tweak to change my Elementary OS style and I have found some beautiful themes like Yosemite, Unfortunately, I need an icons collection like Mac OS to match the theme. Is there anyone could provide me an avliable link to download these icons? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5511" LastEditorUserId="37" LastEditDate="2016-07-08T09:12:32.610" LastActivityDate="2016-10-06T13:20:02.737" Title="Is there an available link to download Mac OS icons collection?" Tags="|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6917" PostTypeId="2" ParentId="6916" CreationDate="2016-07-07T16:49:14.723" Score="0" Body="&lt;p&gt;I once found an icon pack on &lt;a href=&quot;http://n00b-un-2.deviantart.com/art/OSX-Icon-Theme-for-Gnome-279284710&quot; rel=&quot;nofollow noreferrer&quot;&gt;Deviant Art&lt;/a&gt;. I did not like it but you can give it a try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download ZIP file and unpack into the icon folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo unzip ~/Downloads/my_icon_file.zip -d /usr/share/icons&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you have elementary tweaks installed (if not have a look &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2469/how-to-install-elementary-tweaks-on-freya&quot;&gt;here&lt;/a&gt;) you can chose that icon theme.&lt;/p&gt;&#xA;" OwnerUserId="107" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-07-07T16:49:14.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6918" PostTypeId="2" ParentId="6914" CreationDate="2016-07-07T17:02:48.967" Score="2" Body="&lt;p&gt;I do not know how to get the browser in the list. And the suggestions below will not be a complete answer. But maybe this workaround helps you to find a solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; ~/.config/mimeapps.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and in &quot;Default Applications&quot; section you can change the default app for &quot;browser relevant&quot; mimetypes (e.g. &quot;http&quot;, &quot;https&quot;, &quot;html&quot;, ...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe a &quot;search and replace&quot; (midori.desktop =&gt; chrome.desktop) is exactly what you want. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Untested! Before you start backup the file!&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-07-07T17:02:48.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6921" PostTypeId="1" CreationDate="2016-07-08T16:34:03.907" Score="0" ViewCount="295" Body="&lt;p&gt;I have fresh install of 32-bit ElemetaryOS Freya on iMac 5.1 late 2006 with ati radeon mobility x1600 graphic adapter inside.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone, please, tell how to install driver for this graphic adapter?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5516" LastActivityDate="2016-09-18T22:21:06.823" Title="How to install driver for graphic adapter" Tags="|release-freya|graphic-drivers|radeon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6922" PostTypeId="2" ParentId="6921" CreationDate="2016-07-08T17:44:19.197" Score="1" Body="&lt;p&gt;your gpu is too old,  the propietary driver don't support it anymore, you need to use the open source driver (when you install elementary you are already using it), if you want to use a version a little bit more new of that driver you can update the hardware stack with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-wily xserver-xorg-core-lts-wily xserver-xorg-lts-wily xserver-xorg-video-all-lts-wily xserver-xorg-input-all-lts-wily libwayland-egl1-mesa-lts-wily &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't know how your gpu will function with the new drivers so you need to proced with caution, make a backup befor executing any command&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-07-08T17:44:19.197" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6925" PostTypeId="1" CreationDate="2016-07-09T09:28:00.030" Score="2" ViewCount="266" Body="&lt;p&gt;Will the forthcoming Elementary Freya automount removable media, optical discs and usb devices?&lt;/p&gt;&#xA;" OwnerUserId="5046" LastActivityDate="2016-07-14T02:47:36.400" Title="Will Freya automount media?" Tags="|usb-drive|audio-cd|dvd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6926" PostTypeId="1" CreationDate="2016-07-09T15:17:56.050" Score="1" ViewCount="94" Body="&lt;p&gt;At first, I installed fish shell and used it for some time. but just now I wanted to uninstall fish shell , then I run &lt;code&gt;sudo apt-get purge fish&lt;/code&gt; and logged out. However, when I logined again. I opened the terminal but there was no prompt about command line. there was nothing! When I clicked the closure button, the OS logged out! Besides, I changed into tty(1-6) and input my username and password. the tty showed my password incorrect. I couldn't login into tty. I am really worried my OS, Is there somebody could do me a favor. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5511" LastActivityDate="2016-07-09T15:51:34.067" Title="Couldn't open OS terminal!" Tags="|release-freya|system-installation|software-installation|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6927" PostTypeId="2" ParentId="6926" CreationDate="2016-07-09T15:51:34.067" Score="1" Body="&lt;p&gt;Good news! I fixed this problem! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the just moment, I had tried many ways to recover my OS including download other shells(I downloaded Gnome shell,actually, It doesn't work) and enter the recovery model when the OS start(It often locates under the item of OS and has two or more models).&#xA;Of course, the latter method worked, when you enter the recovery model you should select the 'dpkg' item and it seems only in this item you have write permission.  Before you modify some files the OS will ask one or two questions(Just input 'Yes'), then you can operate the OS as super user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I need to do is that  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;vi /etc/passwd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change mine default bash to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/bin/bash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should find your own username(It often in the end of the file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this time, this crash had been fixed. Just log out the recovery model and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have fun with your recovery OS!&lt;/p&gt;&#xA;" OwnerUserId="5511" LastActivityDate="2016-07-09T15:51:34.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6928" PostTypeId="1" CreationDate="2016-07-09T22:25:42.250" Score="0" ViewCount="99" Body="&lt;p&gt;I have tirer to configure elementary keyboard in ita but does not go!&#xA;How to set up the keyboard in italian?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can i do ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5523" LastActivityDate="2016-09-08T23:27:45.463" Title="How you configure the keyboard?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6929" PostTypeId="1" CreationDate="2016-07-10T05:20:29.477" Score="1" ViewCount="364" Body="&lt;p&gt;I'm trying to locate setting to turn on/off location services system-wide. Is there any way to to achieve that in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="5526" LastEditorUserId="5565" LastEditDate="2016-10-02T14:31:44.700" LastActivityDate="2016-10-02T14:31:44.700" Title="How can I turn off location services system-wide?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6931" PostTypeId="1" CreationDate="2016-07-10T10:52:09.337" Score="0" ViewCount="3786" Body="&lt;p&gt;I need to open some file.apk, When I have used Windows I'd Bluestacks but on Linux doesn't run. How to can I open file.apk on Elementary OS without Wine/Bluestacks? My DE is pantheon.&lt;/p&gt;&#xA;" OwnerUserId="5344" LastActivityDate="2016-07-16T15:00:18.827" Title="How to open .apk with Elementary OS?" Tags="|pantheon-files|pantheon|android|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6933" PostTypeId="1" CreationDate="2016-07-10T21:51:28.473" Score="0" ViewCount="188" Body="&lt;p&gt;Mostly in the title. Is there anyway to get minimize and maximize buttons and change their icons? Similar to OSX.&lt;/p&gt;&#xA;" OwnerUserId="5534" LastActivityDate="2016-07-10T22:03:45.087" Title="Adding windows minimize and maximize buttons?" Tags="|window-management|" AnswerCount="1" CommentCount="0" ClosedDate="2016-07-23T08:22:53.063" ContentLicense="CC BY-SA 3.0" />
  <row Id="6934" PostTypeId="2" ParentId="6933" CreationDate="2016-07-10T22:03:45.087" Score="0" Body="&lt;p&gt;You already have maximize button in every title bar (two arrows going from center to oposite directions), but minimize can be turned on in Window Controls, after installing elementary tweaks (the minize icon is something similar to usual download icon).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-07-10T22:03:45.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6935" PostTypeId="2" ParentId="6928" CreationDate="2016-07-10T22:08:01.933" Score="1" Body="&lt;p&gt;Have you tried from Keyboard settings in System Settings or some other way?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to System Settings-&gt;Keyboard-&gt;Layout, then press small plus icon (+) in bottom left corner and add Italian keyboard. Change the layout and try typing, it should work. &lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-07-10T22:08:01.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6936" PostTypeId="2" ParentId="6931" CreationDate="2016-07-10T22:41:46.313" Score="1" Body="&lt;p&gt;You may use Genymotion to start an android emulator. Once a Genymotion emulator is started, drag &amp;amp; drop your apk, it will be installed and started like in Bluestacks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.genymotion.com/thank-you-freemium/&quot; rel=&quot;nofollow&quot;&gt;https://www.genymotion.com/thank-you-freemium/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2731" LastEditorUserId="2731" LastEditDate="2016-07-16T15:00:18.827" LastActivityDate="2016-07-16T15:00:18.827" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6938" PostTypeId="2" ParentId="6885" CreationDate="2016-07-11T01:05:40.800" Score="4" Body="&lt;p&gt;After several hours trying to figure this out, switching kernels, drivers, etc. I just found the solution!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bcmwl-kernel-source&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me and now i have Wi-fi :).&lt;/p&gt;&#xA;" OwnerUserId="5532" LastActivityDate="2016-07-11T01:05:40.800" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6940" PostTypeId="1" CreationDate="2016-07-11T03:25:22.750" Score="2" ViewCount="2543" Body="&lt;p&gt;I want to customize my elementary OS  with Genie effect(an animation effect in Mac OS), and its equivalent in Linux is called Magic Lamp.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched for many times about this question in Google, However, There seems that all solutions are the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some operations:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install 'Compiz config manager'&lt;/li&gt;&#xA;&lt;li&gt;Install editor 'ghex'&lt;/li&gt;&#xA;&lt;li&gt;Edit three files in '/usr/lib/compiz/' with 'ghex' editor(replace some strings)&lt;/li&gt;&#xA;&lt;li&gt;Change the Magic Lamp settings in (System &gt; Preferences &gt; CompizConfig Settings Manager: Animations &gt; the last tab called &quot;Effects Settings&quot;):&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, It doesn't work. The problem is when  I operate the third step I couldn't find the strings which are to be replaced. Besides, these solution is a little old and some of them are in 2008 or earlier.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some links about the solution:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://ch0yan.wordpress.com/2013/01/03/mac-osx-like-genie-effect-on-ubuntu-12-04/&quot; rel=&quot;nofollow&quot;&gt;https://ch0yan.wordpress.com/2013/01/03/mac-osx-like-genie-effect-on-ubuntu-12-04/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.omgubuntu.co.uk/2010/08/get-the-os-x-genie-effect-in-compiz-easily&quot; rel=&quot;nofollow&quot;&gt;http://www.omgubuntu.co.uk/2010/08/get-the-os-x-genie-effect-in-compiz-easily&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.webupd8.org/2009/05/docky-move-it-to-top-of-desktop-add.html&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2009/05/docky-move-it-to-top-of-desktop-add.html&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;As a result, Is there anyone could provide me a new solution to this problem? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5511" LastEditorUserId="26" LastEditDate="2016-09-25T17:03:13.020" LastActivityDate="2016-12-07T11:12:28.107" Title="How to install genie effect of Mac OS in my elementary OS？" Tags="|release-freya|gui-toolkits|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6943" PostTypeId="2" ParentId="517" CreationDate="2016-07-11T20:12:28.677" Score="0" Body="&lt;p&gt;I've had a similar problem with an NFS share on a server that is not always on. Pantheon-files wants to connect to the same locations as when it was last used, if that location is not available then pantheon-files fails to start. My syslog showed repeated attempts to contact the NFS share and pantheon-files doesn't seem to time out. A work around is to open a terminal and run pantheon-files with a path that does currently exists. eg :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pantheon-files /home/$USER &lt;/p&gt;&#xA;&#xA;&lt;p&gt;which should then open pantheon-files in your home directory.&lt;/p&gt;&#xA;" OwnerUserId="5544" LastActivityDate="2016-07-11T20:12:28.677" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6945" PostTypeId="2" ParentId="5598" CreationDate="2016-07-12T09:05:32.520" Score="2" Body="&lt;p&gt;I think both Chrome and Firefox use PPAPI, the pepper flash plugin so could be a compatibility issue with that. I would try looking in ~/.xsession-errors or ~/.xsession-errors.old if you have had to reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if you have an Intel display adapter then try enabling &quot;sna&quot; as the Acceleration Method, it fixes a lot of video issues with some Intel chipsets in Ubuntu based distro's. Here's a link on how to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.apolitech.com/2016/01/how-to-solve-video-tearing-on-intel.html&quot; rel=&quot;nofollow&quot;&gt;http://www.apolitech.com/2016/01/how-to-solve-video-tearing-on-intel.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-07-12T09:05:32.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6946" PostTypeId="1" AcceptedAnswerId="6949" CreationDate="2016-07-12T12:21:24.677" Score="0" ViewCount="572" Body="&lt;p&gt;Ever used &lt;em&gt;firebug&lt;/em&gt; or &lt;em&gt;google chrome inspector&lt;/em&gt;? Is there any similar way to inspect elements in the desktop environment to get their &quot;element name&quot; or &quot;class&quot; or &quot;id&quot;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually I've installed the os x Yosemite theme on my Elementary OS but there are a few of the elements in the DE which does not seem to look good e.g. the menus on the wingpanel and slingsot items. I opened up the theme files and there is CSS styling. I can write CSS but how will I know which &lt;em&gt;class&lt;/em&gt; or &lt;em&gt;element&lt;/em&gt; to use as a selector? Although there are comments in the &lt;strong&gt;apps.css&lt;/strong&gt; and &lt;strong&gt;gtk-widgets.css&lt;/strong&gt; files which indicate the css for a few elements like slingshot but when i make change to them nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any tool available out there which can help me do this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated!&lt;/p&gt;&#xA;" OwnerUserId="5550" LastActivityDate="2016-07-13T12:55:49.753" Title="GTK theme inspector for Desktop Enviroment elements" Tags="|release-freya|wingpanel|gtk|pantheon|design|" AnswerCount="2" CommentCount="0" ClosedDate="2016-07-23T08:24:08.880" ContentLicense="CC BY-SA 3.0" />
  <row Id="6947" PostTypeId="1" CreationDate="2016-07-12T12:34:14.640" Score="0" ViewCount="910" Body="&lt;p&gt;I Installed elementary os freya on an old computer, dual boot with windows xp:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ram 1GB&#xA;Processor: Amd i686&#xA;Graphic card is: S3 ProSavageDDR&#xA;It is very slow. &#xA;I checked on the gnome monitor.&#xA;Memory usage is about 50% and it uses very little swap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But what concerns me is this. At Idle cpu usage is 50%&#xA;As soon as I open something simple like the applications menue cpu usage goes to 100%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Windows XP is running fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most of cpu usage is from the desktop invironment runs between 40 and 60 percent even If i do nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something wron with configuration or is the computes simply too slow for Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="5551" LastActivityDate="2016-09-20T18:07:34.183" Title="50% CPU usage on idle, 100% CPU usage as soon as I open a window" Tags="|cpu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6949" PostTypeId="2" ParentId="6946" CreationDate="2016-07-12T20:41:02.927" Score="1" Body="&lt;p&gt;You can use &lt;strong&gt;Gtk Inspector&lt;/strong&gt;. To enable it open a terminal and execute :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gtk.Settings.Debug enable-inspector-keybinding true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And now you can launch it with &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;I&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://wiki.gnome.org/Projects/GTK%2B/Inspector&quot; rel=&quot;nofollow&quot;&gt;Gnome wiki&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-07-12T20:47:33.610" LastActivityDate="2016-07-12T20:47:33.610" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="6950" PostTypeId="1" CreationDate="2016-07-12T22:00:06.133" Score="1" ViewCount="1791" Body="&lt;p&gt;Is there any wifi strength related bug on Loki or Ubuntu 16.04? I've been experiencing low strength and therefore low speed. I'm on a fresh Loki installation running on an HP Laptop with a Realtek &lt;code&gt;RTL8723BE&lt;/code&gt; network adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note: This was one of the adapters that suffered from connection drops on Ubuntu 14.04 after sleeping them and/or after x amount of time (solved by manually updating the driver) but as non of those issues happen now I don't think it would be solved the same way.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-14T21:29:08.030" Title="Low wifi strength on Loki" Tags="|wifi|networking|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6951" PostTypeId="1" CreationDate="2016-07-12T22:36:43.650" Score="2" ViewCount="3220" Body="&lt;p&gt;My problem is that wifi networks in the vicinity are not detected even though the wifi module is (apparently) turned on, and ethernet is working fine (I had to get that working manually as well):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did a fresh eos Freya 0.3.2 install on my HP Zbook (i7, intel I210-LM ethernet, Intel 8260 wireless module). After I installed eos, I did not have ethernet, however after installing e1000e module it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the wifi I tried a lot of things:&#xA;1) Installed iwlwifi module as suggested by a forum.&#xA;2) Removed bcmwl-kernel-source and b43-fcutter and reinstalled it as suggested by another forum.&#xA;3) After I installed the backports wlan0 was detected without me adding it to /etc/network/interfaces file (or maybe it detected after I added it, I cannot quite remember the order now). Anyway, wlan0, eth0 is detected by ifconfig as shown in the outputs below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(of course I rebooted and restarted network manager each time I tried these various things).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The wifi is enabled, I can see it checked in my network manager, but it cannot detect wifi networks in the vicinity. If I run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwlist scan&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can see the networks in the vicinity but I cannot connect to them using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwconfig wlan0 essid name key password&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;None of the wifi networks are visible from the network-manager. Can anyone please suggest an approach that can solve this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The outputs for the various info commands are as follows:&#xA;lshw -C network&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HP-ZBook-15-G3:~$ lshw -C network&#xA;WARNING: you should run this program as super-user.&#xA;  *-network               &#xA;       description: Wireless interface&#xA;       product: Wireless 8260&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: wlan0&#xA;       version: 3a&#xA;       serial: 44:85:00:29:b9:77&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=3.19.0-64-generic firmware=16.242414.0 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn&#xA;       resources: irq:37 memory:e5200000-e5201fff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: Ethernet Connection (2) I219-LM&#xA;       vendor: Intel Corporation&#xA;       physical id: 1f.6&#xA;       bus info: pci@0000:00:1f.6&#xA;       logical name: eth0&#xA;       version: 31&#xA;       serial: a0:8c:fd:4b:7e:a8&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k duplex=full firmware=0.8-4 ip=10.0.101.67 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s&#xA;       resources: irq:28 memory:e5400000-e541ffff&#xA;WARNING: output may be incomplete or inaccurate, you should run this program as super-user.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for sudo ifconfig:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;eth0      Link encap:Ethernet  HWaddr a0:8c:fd:4b:7e:a8  &#xA;          inet addr:10.0.101.67  Bcast:10.0.101.255  Mask:255.255.254.0&#xA;          inet6 addr: fe80::a28c:fdff:fe4b:7ea8/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:22749 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:1336 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:3161501 (3.1 MB)  TX bytes:239083 (239.0 KB)&#xA;          Interrupt:11 Memory:e5400000-e5420000 &#xA;&#xA;lo        Link encap:Local Loopback  &#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:126 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:126 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:0 &#xA;          RX bytes:11408 (11.4 KB)  TX bytes:11408 (11.4 KB)&#xA;&#xA;wlan0     Link encap:Ethernet  HWaddr 44:85:00:29:b9:77  &#xA;          UP BROADCAST MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:0 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for inxi -Fxz&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inxi -Fxz&#xA;System:    Host: name-HP-ZBook-15-G3 Kernel: 3.19.0-64-generic x86_64 (64 bit, gcc: 4.8.4) &#xA;           Desktop: Gnome Distro: elementary OS 0.3.2 freya&#xA;Machine:   System: HP product: HP ZBook 15 G3&#xA;           Mobo: HP model: 80D5 version: KBC Version 10.62 Bios: HP version: N81 Ver. 01.08 date: 06/07/2016&#xA;CPU:       Quad core Intel Core i7-6820HQ CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 21686.3 &#xA;           Clock Speeds: 1: 2400.00 MHz 2: 2700.00 MHz 3: 2700.00 MHz 4: 2700.00 MHz 5: 2700.00 MHz 6: 2700.00 MHz 7: 1900.00 MHz 8: 2700.00 MHz&#xA;Graphics:  Card-1: Intel Device 191b bus-ID: 00:02.0 &#xA;           Card-2: NVIDIA GM107GLM [Quadro M1000M] bus-ID: 01:00.0 &#xA;           X.Org: 1.17.1 drivers: fbdev,intel (unloaded: vesa) Resolution: 1920x1080@77.0hz &#xA;           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.6, 256 bits) GLX Version: 3.0 Mesa 10.5.9 Direct Rendering: Yes&#xA;Audio:     Card: Intel Sunrise Point-H HD Audio driver: snd_hda_intel bus-ID: 00:1f.3 Sound: ALSA ver: k3.19.0-64-generic&#xA;Network:   Card-1: Intel Ethernet Connection (2) I219-LM driver: e1000e ver: 2.3.2-k bus-ID: 00:1f.6&#xA;           IF: eth0 state: up speed: 100 Mbps duplex: full mac: &amp;lt;filter&amp;gt;&#xA;           Card-2: Intel Wireless 8260 driver: iwlwifi ver: backported bus-ID: 03:00.0&#xA;           IF: wlan0 state: down mac: &amp;lt;filter&amp;gt;&#xA;Drives:    HDD Total Size: 500.1GB (1.1% used) 1: id: /dev/sda model: ST500LM021 size: 500.1GB temp: 37C &#xA;Partition: ID: / size: 124G used: 5.0G (5%) fs: ext4 ID: swap-1 size: 25.00GB used: 0.00GB (0%) fs: swap &#xA;RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present&#xA;Sensors:   System Temperatures: cpu: 42.0C mobo: 0.0C &#xA;           Fan Speeds (in rpm): cpu: N/A &#xA;Info:      Processes: 229 Uptime: 22 min Memory: 888.8/15928.8MB Runlevel: 2 Gcc sys: 4.8.4 &#xA;           Client: Shell (bash 4.3.11) inxi: 1.9.17 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for iwconfig:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo iwconfig&#xA;lo        no wireless extensions.&#xA;&#xA;wlan0     IEEE 802.11abgn  ESSID:off/any  &#xA;          Mode:Managed  Access Point: Not-Associated   Tx-Power=0 dBm   &#xA;          Retry short limit:7   RTS thr:off   Fragment thr:off&#xA;          Encryption key:off&#xA;          Power Management:on&#xA;&#xA;eth0      no wireless extensions.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for sudo rfkill list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo rfkill list&#xA;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for dmesg | grep iwl (after copying iwlwifi-*.ucode files to /lib/firmware):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-HP-ZBook-15-G3:~$ dmesg | grep iwl&#xA;[   13.253428] iwlwifi 0000:03:00.0: enabling device (0000 -&amp;gt; 0002)&#xA;[   13.255386] iwlwifi 0000:03:00.0: Unsupported splx structure&#xA;[   13.270926] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-8000C-17.ucode failed with error -2&#xA;[   13.618638] iwlwifi 0000:03:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm&#xA;[   13.793686] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208&#xA;[   13.793895] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   13.794534] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   13.795206] iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected&#xA;[   13.981395] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'&#xA;[   14.398940] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   14.399303] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   14.399857] iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected&#xA;[   14.545142] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   14.545507] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled&#xA;[   14.546061] iwlwifi 0000:03:00.0: can't access the RSA semaphore it is write protected&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I try to use dhcp for the wlan0 connection using sudo dhclient -v wlan0 I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-HP-ZBook-15-G3:~$ sudo dhclient -v wlan0&#xA;Internet Systems Consortium DHCP Client 4.2.4&#xA;Copyright 2004-2012 Internet Systems Consortium.&#xA;All rights reserved.&#xA;For info, please visit https://www.isc.org/software/dhcp/&#xA;&#xA;Listening on LPF/wlan0/44:85:00:29:b9:77&#xA;Sending on   LPF/wlan0/44:85:00:29:b9:77&#xA;Sending on   Socket/fallback&#xA;DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 3 (xid=0x8abec628)&#xA;DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 (xid=0x8abec628)&#xA;....&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The DHCPDISCOVER commands keep appending but nothing happens for a long time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try to connect through command line it gives (actual network name and key hidden of course):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HP-ZBook-15-G3:~$ sudo iwconfig wlan0 essid thename key s:thekey&#xA;Error for wireless request &quot;Set Encode&quot; (8B2A) :&#xA;    SET failed on device wlan0 ; Invalid argument.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also tried with the s:password option&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HP-ZBook-15-G3:~$ sudo iwconfig wlan0 essid thename key thekey&#xA;Error for wireless request &quot;Set Encode&quot; (8B2A) :&#xA;    invalid argument &quot;thekey&quot;.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, when I reboot, I have to manually start network-manager service.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need more information.&lt;/p&gt;&#xA;" OwnerUserId="5554" LastActivityDate="2016-07-15T00:09:12.727" Title="Wifi networks not detected in elementary OS. Ethernet working" Tags="|wifi|networking|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6952" PostTypeId="2" ParentId="271" CreationDate="2016-07-13T03:09:04.690" Score="1" Body="&lt;p&gt;If you wish to use Japanese input follow the &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/33cfha/multiple_inputs_under_freya_chinese_case_pinyin/&quot; rel=&quot;nofollow&quot;&gt;elementary subreddit here&lt;/a&gt; but with step (3) replaced with either&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install fcitx fcitx-anthy im-config&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install fcitx fcitx-mozc im-config&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on whether you wish to use (discontinued but widely used) &lt;code&gt;anthy&lt;/code&gt; or (maintained by Google) &lt;code&gt;mozc&lt;/code&gt; input.&lt;/p&gt;&#xA;" OwnerUserId="5205" LastEditorUserId="5205" LastEditDate="2016-07-20T00:54:27.890" LastActivityDate="2016-07-20T00:54:27.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6954" PostTypeId="1" CreationDate="2016-07-13T04:36:54.180" Score="0" ViewCount="436" Body="&lt;p&gt;I have a Lenovo Thinkpad T440 that came with the infamous clackpad. Since that was much of an annoyance, I replaced it with a T540 touchpad - Alps DualPoint TouchPad. Here's the output from &lt;code&gt;xinput&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ AlpsPS/2 ALPS DualPoint TouchPad          id=11   [slave  pointer  (2)]&#xA;⎜   ↳ DualPoint Stick                           id=12   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;↳ Sleep Button                              id=8    [slave  keyboard (3)]&#xA;↳ Integrated Camera                         id=9    [slave  keyboard (3)]&#xA;↳ AT Translated Set 2 keyboard              id=10   [slave  keyboard (3)]&#xA;↳ ThinkPad Extra Buttons                    id=13   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I used to run Windows 8.1 and the touchpad worked just fine with multi-finger gestures as well. However, in elementaryOS, only the two-finger scrolling work. That itself is fine but sometimes (let's say every third or fourth scroll) the scrolling starts off extremely jumpy. If I am trying to go down a page, it'll jump all the way up near the start of the page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a mouse sensitivity issue, driver issue? How can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="5556" LastActivityDate="2016-09-15T18:18:23.237" Title="Jumpy scrolling on ALPS touchpad" Tags="|touchpad|drivers|thinkpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6955" PostTypeId="2" ParentId="4616" CreationDate="2016-07-13T05:47:53.747" Score="1" Body="&lt;p&gt;Click on &quot;Applications&quot; in the top-right corners and type &quot;Language&quot;, this find the &quot;Language &amp;amp; Region&quot; settings. Open this and it will allow selecting French language in the left panel.  This may require clicking &quot;Unlock&quot; in the top right (and entering your administrator or &quot;sudo&quot; password) or clicking an &quot;install&quot; button to complete installing missing languages. Hopefully once the system is configured in your language it will be easier to adjust update settings as you wish.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rough Translation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cliquez sur &quot;Applications&quot; dans le coins en haut droite et tapez &quot;Langue&quot; , cette découverte les paramètres &quot;Langue et Région&quot;. Ouvrez cela et il permettra la sélection de la langue française dans le panneau de gauche. Cela peut nécessiter en cliquant sur &quot;Unlock&quot; en haut à droite (et en entrant votre administrateur ou &quot;sudo&quot; mot de passe) ou en cliquant sur un bouton &quot; installer &quot; pour terminer l'installation de langues manquantes . Espérons une fois que le système est configuré dans votre langue , il sera plus facile de régler les paramètres de mise à jour que vous le souhaitez.&lt;/p&gt;&#xA;" OwnerUserId="5205" LastActivityDate="2016-07-13T05:47:53.747" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6956" PostTypeId="2" ParentId="6951" CreationDate="2016-07-13T06:37:53.533" Score="2" Body="&lt;p&gt;The problem is in the kernel, whilst version 3.19 supports the Intel 8260 driver it does not contain native support which as you've found means a lot of messing around. I'm told that Kernel v4.2 onwards does support it natively. Newer kernels are available in the standard repos. Wily is v4.2 and Xenial is v4.4. So:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-image-generic-lts-xenial&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="68" LastEditDate="2016-07-15T00:09:12.727" LastActivityDate="2016-07-15T00:09:12.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6957" PostTypeId="2" ParentId="6946" CreationDate="2016-07-13T12:55:49.753" Score="1" Body="&lt;p&gt;To debug the DE itself (I assume you want to debug a wingpanel widget), you need to somehow focus them. The easiest way I use is opening Slingshot (or any other wingpanel indicator), hovering your mouse over it and pressing &lt;kbd&gt;Ctrl+Shift+I&lt;/kbd&gt;. The best position to hover your mouse over to inspect the slingshot widget is this little triangle (don't know the proper name for it):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4pBet.png&quot; alt=&quot;Imgur&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course &lt;kbd&gt;Ctrl+Shift+I&lt;/kbd&gt; will work only if gtk debugging is enabled.&lt;/p&gt;&#xA;" OwnerUserId="2308" LastActivityDate="2016-07-13T12:55:49.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6959" PostTypeId="1" AcceptedAnswerId="6968" CreationDate="2016-07-13T19:19:14.003" Score="0" ViewCount="1576" Body="&lt;p&gt;My ETPS/2 Elantech Touchpad stopped working after an update.&#xA;Before a few days it worked fine, but now I can't do anything only the buttons are working.&#xA;It seems to be the same problem as described here: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5314/etps-2-elantech-touchpad-buttons-work-cannot-swipe&quot;&gt;ETPS/2 Elantech Touchpad. Buttons work, cannot swipe&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the solution described there, but installing the &lt;code&gt;focaltech-dkms&lt;/code&gt; drivers, &lt;code&gt;modprobe -r psmouse&lt;/code&gt; and &lt;code&gt;modprobe psmouse&lt;/code&gt; didn't help.&#xA;I rebooted and checked if touchpad is activated in the system-settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone a clue where to look further or another solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xinput&lt;/code&gt; gives me the following line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;# xinput&lt;br&gt;&#xA;  ⎜ ↳  ...&lt;br&gt;&#xA;  ⎜ ↳ ETPS/2 Elantech Touchpad id=15 [slave pointer (2)]&lt;/code&gt;,  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;so it seems to be recognized.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I also tried the solution below, but there is no &lt;code&gt;serio4&lt;/code&gt; directory, only &lt;code&gt;serio0&lt;/code&gt; and &lt;code&gt;serio1&lt;/code&gt;. Since the change is not permanent apparently, I tried this command (as root, didn't work with sudo):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;echo 1 &amp;gt; /sys/devices/platform/i8042/serio1/reg_07&lt;/code&gt;&lt;br&gt;&#xA;  It executes without an error, but the touchpad still doesn't work.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cat /sys/devices/platform/i8042/serio1/reg_07&lt;/code&gt; gives me &lt;code&gt;0x07&lt;/code&gt; as output. Is this correct? Shouldn't be there a &lt;code&gt;1&lt;/code&gt; or at least a change?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT.EDIT:&lt;/strong&gt; When the screen turns black due power saving options, it gets back to life when I touch the touchpad, but the mouse pointer is still not moving.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-07-15T15:11:17.043" Title="ETPS/2 Elantech Touchpad not working after update" Tags="|touchpad|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6960" PostTypeId="2" ParentId="5175" CreationDate="2016-07-13T19:40:01.333" Score="0" Body="&lt;p&gt;Actually you can use the owncloud sync client &lt;code&gt;.deb&lt;/code&gt;-file, which you can download at your owncloud page. To sync your calendar you can use the CalDAV-Link from the owncloud calendar app and import it into the desktop calendar app from eOS.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-13T19:40:01.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6961" PostTypeId="2" ParentId="6931" CreationDate="2016-07-13T23:54:57.000" Score="0" Body="&lt;p&gt;The .apk extension is an android application package. If you want to run an android app on elementary OS (which is what you were doing on Windows, since Bluestacks is an android emulator), you should search for an android emulator such as &lt;a href=&quot;https://www.genymotion.com/&quot; rel=&quot;nofollow&quot;&gt;Genymotion&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-07-13T23:54:57.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6962" PostTypeId="2" ParentId="6925" CreationDate="2016-07-14T02:47:36.400" Score="1" Body="&lt;p&gt;Yes, removable media is getting auto mounted. Contrary to other OS the file manager won't popup if you insert a media. Apparently there is no option to set the &lt;em&gt;default action&lt;/em&gt; for audio CDs or DVDs, like open them in VLC or sth.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-14T02:47:36.400" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6963" PostTypeId="2" ParentId="4719" CreationDate="2016-07-14T08:51:43.053" Score="2" Body="&lt;p&gt;The solution you tried is for Intel displays, hence &quot;Driver 'Intel'&quot;, you have Nvidia. Your login loop was a result of forcing X-windows to run the Intel driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried installing the proprietary Nvidia drivers. You can install them by running &quot; Software Updater &quot; from the applications menu, after it has checked for updates click the &quot;settings&quot; button, click the &quot;Additional Drivers&quot; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you have enabled the Nvidia driver then you can install nvidia-settings from the software centre that will add an application for controlling different aspects of your graphics card. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-14T10:39:56.990" LastActivityDate="2016-07-14T10:39:56.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6964" PostTypeId="2" ParentId="6931" CreationDate="2016-07-14T09:40:33.877" Score="0" Body="&lt;p&gt;Try using Shashlik (&lt;a href=&quot;http://shashlik.io&quot; rel=&quot;nofollow&quot;&gt;shashlik.io&lt;/a&gt;). It is an Android simulator (not emulator) which lets you run Android apps (APKs).Their website has instructions on using it&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2016-07-14T09:40:33.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6965" PostTypeId="2" ParentId="6959" CreationDate="2016-07-14T11:39:34.713" Score="0" Body="&lt;p&gt;There is a known bug regarding the ETPS/2 touchpad, try the following in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo su - &lt;br&gt;&#xA;echo 1 &gt; /sys/devices/platform/i8042/serio4/reg_07&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it works it will only work til you reboot so you will need to add the line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;echo 1 &gt; /sys/devices/platform/i8042/serio4/reg_07&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to /etc/rc.local just before 'exit 0' to make it run that command at boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If serio4 doesn't exist you can find out which one it should be  with &lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /proc/bus/input/devices | grep -iA 9 touch&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-14T18:56:34.707" LastActivityDate="2016-07-14T18:56:34.707" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="6966" PostTypeId="2" ParentId="2397" CreationDate="2016-07-14T16:11:24.183" Score="1" Body="&lt;p&gt;If I do a direct connection to my HP Officejet Pro L7590 via USB, the printer is immediately recognized as a scanner as well. So, contrary to HP's own documentation, this seems to be a limitation of libsane-hpaio when trying to use over a wired network. This is the only way I have managed to get this to work. &lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2016-07-14T16:11:24.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6967" PostTypeId="1" CreationDate="2016-07-14T17:58:55.410" Score="2" ViewCount="2689" Body="&lt;p&gt;I am running elementary OS freya which is based on Ubuntu 14.04, I have a lenovo U41-70 laptop. My horizontal mouse movement is fine but to bring the mouse from top of the screen to the bottom (vertical Movement) I have to swipe my finger on the touchpad 3-4 time. I tried setting the touchpad Vertical and Horizontal Resolution to 75 and also editing the Finger High, Low and Press attributes in xinput. Nothing works.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-10-12T15:49:55.940" Title="How to fix elementaryOS touchpad problem" Tags="|release-freya|mouse|touchpad|input|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6968" PostTypeId="2" ParentId="6959" CreationDate="2016-07-14T20:26:52.863" Score="1" Body="&lt;p&gt;Oh my gosh, I totally forgot that I had to install the &lt;code&gt;xorg-dev&lt;/code&gt; package for testing purposes. It seems that the &lt;code&gt;xserver-xorg-input-mtrack&lt;/code&gt; package was removed with this process.&lt;br&gt;&#xA;After re-install &lt;code&gt;xserver-xorg-input-mtrack&lt;/code&gt; and rebooting the notebook everything is back to normal!&lt;br&gt;&#xA;Thanks @dave-g for your help. I would say a win-win: touchpad is working again and I have updated my kernel =)  &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; To clarify: Updating the kernel didn't help, but without the correct &lt;code&gt;xorg&lt;/code&gt;-driver it never could.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT.EDIT:&lt;/strong&gt; 'Cause the &lt;code&gt;xserver-xorg-input-mtrack&lt;/code&gt; didn't work well &lt;em&gt;(two finger swipe let the pointer jump around)&lt;/em&gt; I had to install &lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt; and reboot to have the best touchpad &lt;em&gt;(or trackpad?? Seriously I'm confused..)&lt;/em&gt; experience.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastEditorUserId="5562" LastEditDate="2016-07-15T15:11:17.043" LastActivityDate="2016-07-15T15:11:17.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6969" PostTypeId="1" CreationDate="2016-07-14T20:48:39.623" Score="2" ViewCount="573" Body="&lt;p&gt;On Ubuntu 16.04, &lt;code&gt;fglrx&lt;/code&gt; is not supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since elementary OS Loki uses Ubuntu 16.04 as its base, will elementary OS Loki support &lt;code&gt;fglrx&lt;/code&gt; or not?&lt;/p&gt;&#xA;" OwnerUserId="5570" LastEditorUserId="138" LastEditDate="2016-07-28T16:08:44.010" LastActivityDate="2016-08-07T09:12:49.337" Title="Will elementary OS Loki support fglrx?" Tags="|graphics|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6971" PostTypeId="2" ParentId="6947" CreationDate="2016-07-14T22:28:22.290" Score="0" Body="&lt;p&gt;I recently installed MX Linux on and old laptop with a celeron processor and 1gb of ram. Worked pretty good and run kodi fine too. Its Debian based like Ubuntu. Comes with loads of software and you can enable compositing if your graphics card can handle it. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-07-14T22:28:22.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6972" PostTypeId="1" AcceptedAnswerId="7032" CreationDate="2016-07-15T05:24:23.800" Score="0" ViewCount="638" Body="&lt;p&gt;I'm running Elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since last version 7.0, Xmind crash on startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It shows the Splash Page, open the main program, the computer to be sluggish and after some seconds (~15-30 sec).&#xA;It logout from my session (close all program), and show my login page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on logs /home/user/.xmind/workspace-cathy/.metadata/.log&lt;/p&gt;&#xA;&#xA;&lt;p&gt;!ENTRY org.eclipse.e4.ui.workbench 4 0 2016-07-15 06:59:32.690&#xA;!MESSAGE Unable to retrieve the bundle from the URI: bundleclass://org.xmind.ui.sharing/org.xmind.ui.internal.sharing.SharingServiceStatusToolControl&#xA;!SESSION 2016-07-15 07:01:44.144 -----------------------------------------------&#xA;eclipse.buildId=3.6.0.R-201511090408&#xA;java.version=1.7.0_101&#xA;java.vendor=Oracle Corporation&#xA;BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US&#xA;Command-line arguments: -os linux -ws gtk -arch x86_64 -data @user.home/.xmind/workspace-cathy&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested Xmind 7.0 and same behavior spotted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone using Xmind 7.5 linux have the same behavior ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestion to tshoot this issue ? &lt;/p&gt;&#xA;" OwnerUserId="5571" LastEditorUserId="5571" LastEditDate="2016-07-15T05:30:07.817" LastActivityDate="2016-07-21T05:49:23.053" Title="Xmind 7.5 / 7.0 crash on startup" Tags="|software-installation|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6973" PostTypeId="2" ParentId="4386" CreationDate="2016-07-15T06:53:09.493" Score="1" Body="&lt;p&gt;Elementary OS is based on Ubuntu, Ubuntu creates the root user without a password. This is a security measure as Linux does not allow anyone to log into a user account that doesn't have a password. So by default no one can log in as root. Users can run commands as root by using the sudo command, and can change to the root user using sudo su - . There is no real advantage to giving root a password on an Ubuntu system but if you want to you can simply use sudo passwd ... ie running passwd as root. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What was you trying to do when you was asked for a root password ?&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-15T06:58:32.143" LastActivityDate="2016-07-15T06:58:32.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6974" PostTypeId="2" ParentId="2595" CreationDate="2016-07-15T08:07:24.700" Score="2" Body="&lt;p&gt;The problem is that when you installed elementary os it configured x-windows to use your on board graphics card, with the Nvidia connected its still trying to use driver from the on board graphics card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Connect the nvidia card and start up&#xA;At the log in screen, don't log in.&#xA;Press Ctrl+alt+f2&#xA;Log in with your username and password in the text terminal. Then run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo dpkg-reconfigure xserver-xorg&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot, enjoy. PS I would use the nouveau driver for that card, it will already be installed and is an open source driver for Nvidia cards with KMS supported automatically. You do not have to change anything. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-07-15T08:07:24.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6977" PostTypeId="1" CreationDate="2016-07-15T17:03:13.787" Score="0" ViewCount="70" Body="&lt;p&gt;I've been trying for a long time to get elementary OS freya 0.3.2 running on my HP Compaq NC2400 laptop (1.2ghz core duo, 2gb of ram), yet the installer keeps crashing and crashing. Sometimes I get an error that says that certain files that are being copied do not match their installation medium sources: other times i get an Errno 5. And when I get to the installing/configuring part, the installer always crashes. I've checked the SHA256 hash for the ISO, and it matches. I've also remade my installation USB numerous times, and it doesn't have any errors. What could be happening here? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5576" LastActivityDate="2016-07-16T10:05:22.837" Title="Keep getting random errors with elementary OS installer on laptop" Tags="|release-freya|system-installation|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6979" PostTypeId="1" CreationDate="2016-07-15T18:15:36.500" Score="4" ViewCount="72" Body="&lt;p&gt;With elementary's focus on UX design, I'm wondering &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;How elementary does usability testing;&lt;/li&gt;&#xA;&lt;li&gt;How often elementary does usability testing;&lt;/li&gt;&#xA;&lt;li&gt;How the results are applied to making changes to the design and flow of the applications and shell.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;By usability tests, I mean sitting down with normal folk (not people you know or people who use elementary or other Linux distributions, but also people who would be good representatives of your customers) and watching them try to use your applications and shell to accomplish tasks.&lt;br&gt;&#xA;As you already know, this kind of research is crucial to UX to avoid subjective bias.  In my time as a UX architect I've learned that design is just as much science as it is an art.&lt;/p&gt;&#xA;" OwnerUserId="4703" LastActivityDate="2016-12-28T18:47:43.980" Title="How does elementary perform usability tests?" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6980" PostTypeId="2" ParentId="6977" CreationDate="2016-07-16T10:05:22.837" Score="1" Body="&lt;p&gt;Probably a bad partition that your installing to. Possibly caused by a disk defect. What partitoning and filesystem are you using ?&lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-07-16T10:05:22.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6981" PostTypeId="1" CreationDate="2016-07-16T11:00:58.037" Score="0" ViewCount="550" Body="&lt;p&gt;&lt;em&gt;(newbie alert!)&lt;/em&gt;. So basically, a window kept pop-in out saying that &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;the volume &quot;boot&quot; has only 0 bytes disk space remaining&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So I searched for a solution and I found one saying that I should delete the old kernels. I followed the steps and apparently I deleted all the kernels or the original kernels I'm not sure. After restarting my computer, the screen stuck in a black window. But when I force shut down, and start the computer again then I enter the boot menu F12, I choose the HDD I'll have something like this :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GNU GRUB version 2.02~Beta2-9ubuntu1.11+elementary10~ubuntu0.3.2.1&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elemnetary OS&lt;/li&gt;&#xA;&lt;li&gt;Advanced options for elementary OS&lt;/li&gt;&#xA;&lt;li&gt;Memory test (memtest 86+)&lt;/li&gt;&#xA;&lt;li&gt;Memory test (memtest 86+, serial console 115200)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So, I choose &quot;Advanced options for elementary OS&quot; then I have to choose between seven kernels, the first one doesn't work it.But, the rest do. The second one works perfectly fine. So, every-time I turn on my computer I have to follow all these steps. I think if I update the software It'll fix that. But, the &quot;boot&quot; still has only 0 bytes. Basically, I'm stuck between two problems.Is there a way to repair the system without loosing all my data?&lt;/p&gt;&#xA;" OwnerUserId="5579" LastEditorUserId="5565" LastEditDate="2016-10-06T02:27:44.783" LastActivityDate="2016-10-06T02:27:44.783" Title="How to repair the system after an accidental deletion of the kernels?" Tags="|boot|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6982" PostTypeId="2" ParentId="6981" CreationDate="2016-07-16T11:22:48.630" Score="1" Body="&lt;p&gt;sudo update-grub &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should fix your booting issue and:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get autoremove&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should remove older kernels and packages that are no longer used and free up some disk space.&#xA;Future updates will replace whatever it was you deleted but if your still having issues then:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get --fix-broken install&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-16T11:28:55.720" LastActivityDate="2016-07-16T11:28:55.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6984" PostTypeId="2" ParentId="6722" CreationDate="2016-07-16T11:36:24.973" Score="1" Body="&lt;p&gt;If your screen isnt changing at all then the password your using is incorrect for whatever reason, you can reset it using this guide on another thread.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2813/i-forgot-my-password&quot;&gt;I forgot my password&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or alternitively at the log in screen you can press Ctrl+alt+f2 to go to a text terminal and try and log in, if it let's you in that way then x-windows could be broken and you should try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo dpkg-reconfigure xserver-xorg&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-07-16T11:45:40.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6985" PostTypeId="1" CreationDate="2016-07-16T11:39:59.710" Score="0" ViewCount="476" Body="&lt;p&gt;Everytime I choose to boot to eOS,screen goes blank most of the time after GRUB loader. No splash screen is ever displayed. Everytime I need to reset my laptop 3-4 times to get to lock screen of eOS. What is causing this problem and how should I resolve it. I have newly installed eOS and it is fresh. To make sure nothing gone wrong during istallation I installed eOS again and removed previous installation. I have Windows 7 32 bit on dual boot. And I use eOS 3.2 64bit.&lt;/p&gt;&#xA;" OwnerUserId="5581" LastActivityDate="2016-07-16T15:15:36.830" Title="Screen goes blank after GRUB loader" Tags="|system-installation|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6986" PostTypeId="2" ParentId="6985" CreationDate="2016-07-16T12:02:44.983" Score="1" Body="&lt;p&gt;When you turn your computer on, press the &lt;kbd&gt;esc&lt;/kbd&gt; key repeatedly after the bios screen until the grub menu comes up, use the arrow keys to highlight elementary os, press &lt;kbd&gt;e&lt;/kbd&gt; to edit the boot command. Delete the words 'quiet splash $vt_handoff' from the line near the bottom that starts with 'linux' and press &lt;kbd&gt;f10&lt;/kbd&gt;. This won't change it permanently and now you should see the error that is causing the problem.&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-16T15:15:36.830" LastActivityDate="2016-07-16T15:15:36.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6987" PostTypeId="2" ParentId="6985" CreationDate="2016-07-16T14:31:34.160" Score="0" Body="&lt;p&gt;Did you encrypt your disk during the installation? Because I have and every time I boot the screen goes black, but as soon as I press arrow-key-down or -up I can see the password prompt and enter the it. After that eOS continues to boot.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-16T14:31:34.160" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6988" PostTypeId="1" CreationDate="2016-07-16T15:13:42.200" Score="1" ViewCount="644" Body="&lt;p&gt;after today's update of elementaryos I am unable to run virtualbox machines. The error says&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or &#xA;  there is a permission problem with /dev/vboxdrv. Please reinstall the &#xA;  kernel module by executing&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;'/sbin/vboxconfig'&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;as root.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The &#xA;  support driver is not installed. On linux, open returned ENOENT. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;any clue how to fix it? cheers&lt;/p&gt;&#xA;" OwnerUserId="5582" LastActivityDate="2016-09-14T08:39:24.520" Title="VirtualBox on elementaryos" Tags="|kernel|drivers|virtualbox|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="6989" PostTypeId="1" AcceptedAnswerId="7009" CreationDate="2016-07-16T21:31:46.723" Score="0" ViewCount="144" Body="&lt;p&gt;i have downloaded, from the official page, last week and installed yesterday the Elementary OS but i'm having trouble to install basically everything that needs to add ppa.&#xA;Every new ppa i add gives me &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;W: Failed to fetch&#xA;  &lt;a href=&quot;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/sid/main/binary-amd64/Packages&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/sid/main/binary-amd64/Packages&lt;/a&gt;&#xA;  404  Not Found&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;W: Failed to fetch&#xA;  &lt;a href=&quot;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/sid/main/binary-i386/Packages&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/sid/main/binary-i386/Packages&lt;/a&gt;&#xA;  404  Not Found&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This is an exemple of the last ppa i tried to add.&#xA;When it happens i try to clean or update but nothinh happens, so i remove the ppa add.&#xA;I was ignoring it but now i'm  just too pissed about it.&#xA;It happened intalling java, tweak tool, dependencies for opencv and other programs. &#xA;Some of then i have to do a lot of work till i can installed.&#xA;Not it's not probabli my network connection because i tried at 3 different networks :/&#xA;Maybe this is a problem with my iso? Or what i'm really pissed of :( :( &lt;/p&gt;&#xA;" OwnerUserId="5586" LastActivityDate="2016-07-18T23:24:19.370" Title="Recentely installed Elementary giving e Not Found W: Failed to fetch ## 404 For every new ppa" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6990" PostTypeId="1" CreationDate="2016-07-16T21:46:22.087" Score="1" ViewCount="352" Body="&lt;p&gt;I added keyboard shortcut for &lt;code&gt;gnome-terminal&lt;/code&gt; (I preffer this one). When I just create it, it works. After reboot it does not, so I assume something does not start properly on boot.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Can I add it manually, without system settings, willing that it would work.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Whats the process I should turn on and how?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Btw. I use Arch linux with pantheon.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="5587" LastEditorUserId="19360" LastEditDate="2020-01-27T02:31:58.990" LastActivityDate="2020-01-27T02:31:58.990" Title="Custom keyboard shortcuts dont work after reboot" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="6993" PostTypeId="1" CreationDate="2016-07-16T23:55:38.167" Score="5" ViewCount="965" Body="&lt;p&gt;What is the Checksum of the elementary OS Loki Beta 2?&lt;/p&gt;&#xA;" OwnerUserId="5589" LastEditorUserId="26" LastEditDate="2016-10-09T00:33:39.883" LastActivityDate="2016-10-09T00:33:39.883" Title="What is the Checksum of the elementary OS Loki Beta 2?" Tags="|system-installation|release-loki|" AnswerCount="1" CommentCount="1" ClosedDate="2017-02-27T09:59:01.210" ContentLicense="CC BY-SA 3.0" />
  <row Id="6994" PostTypeId="1" AcceptedAnswerId="8184" CreationDate="2016-07-17T02:29:19.977" Score="2" ViewCount="464" Body="&lt;p&gt;I booted elementary OS to a usb via rufus. I booted it onto my laptop and held shift. At the menu, f4 mode only showed normal.&lt;/p&gt;&#xA;" OwnerUserId="5590" LastEditorUserId="26" LastEditDate="2016-09-25T17:02:05.120" LastActivityDate="2016-09-25T17:02:25.700" Title="Is there an elementary OS OEM install mode?" Tags="|grub|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6995" PostTypeId="2" ParentId="6967" CreationDate="2016-07-17T08:16:37.207" Score="3" Body="&lt;p&gt;Thanks for providing the necessary information, after a lot of googling and reading bug reports, it seems the main solutions are as follows, I'll start with the easiest although I know you have already tried it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Adjust the touchpad settings using synclient. &lt;code&gt;synclient -l&lt;/code&gt; will give a list of options, for your problem in particular I would start with pressure settings, in particular &lt;code&gt;synclient PressureMotionMinZ=25&lt;/code&gt;. Changing synclient settings is not permanent so when you work out which ones to change you will need to add some start up commands but on the other hand if you mess it all up you can just reboot to start again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update your kernel. The bug reports reported bugs in kernels 3.3 right through to 4.2 with various issues with the alps touchpad, although I couldn't find anything specific to your problem. Kernel v4.4 is available however in the standard repos so you could try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-image-generic-lts-xenial&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Build your own Kernel Module (driver). I wouldn't try this unless your comfortable with building from source code but you can find instructions by googling 'dkms alps touchpad'. Don't forget to update your initramfs after you build your own module. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Sorry I couldn't be more help but with these types of bugs and without the ability to sit on the computer and run various tests it's hard to diagnose it down to one specific problem.&lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorDisplayName="user212" LastEditDate="2016-10-12T15:49:55.940" LastActivityDate="2016-10-12T15:49:55.940" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="6997" PostTypeId="1" AcceptedAnswerId="7004" CreationDate="2016-07-17T10:55:19.127" Score="0" ViewCount="2471" Body="&lt;p&gt;I have some annyoing problem, the Software &amp;amp; Updates won't start when I click on it, but Software Center works fine. Also I noticed that sometimes, Software Updater automaticly turns on promting me with some updates, but when I click on &quot;Install now&quot; nothing happens. I can only press X to close it. This wasn't happening before and I don't know when it started.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also searched trough search results but nothing worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run in terminal &lt;code&gt;software-properties-gtk&lt;/code&gt; I get this result&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/lib/python3/dist-packages/gi/overrides/Gtk.py:1511: Warning: /build/buildd/glib2.0-2.42.2/./gobject/gsignal.c:1211: unable to lookup signal &quot;window-state-event&quot; of unloaded type 'GtkDialog'&#xA;  initialized, argv = Gtk.init_check(sys.argv)&#xA;/usr/lib/python3/dist-packages/gi/overrides/Gtk.py:1511: Warning: g_signal_add_emission_hook: assertion 'signal_id &amp;gt; 0' failed&#xA;  initialized, argv = Gtk.init_check(sys.argv)&#xA;&#xA;** (software-properties-gtk:31131): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-jSJfg1tbIe: Connection refused&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-properties-gtk&quot;, line 37, in &amp;lt;module&amp;gt;&#xA;    from softwareproperties.gtk.SoftwarePropertiesGtk import SoftwarePropertiesGtk&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py&quot;, line 46, in &amp;lt;module&amp;gt;&#xA;    from .DialogCacheOutdated import DialogCacheOutdated&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/gtk/DialogCacheOutdated.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;    from aptdaemon.gtk3widgets import AptErrorDialog, AptProgressDialog&#xA;  File &quot;/usr/lib/python3/dist-packages/aptdaemon/gtk3widgets.py&quot;, line 42, in &amp;lt;module&amp;gt;&#xA;    gi.require_version(&quot;Vte&quot;, &quot;2.91&quot;)&#xA;  File &quot;/usr/lib/python3/dist-packages/gi/__init__.py&quot;, line 83, in require_version&#xA;    (namespace, version))&#xA;ValueError: Namespace Vte not available for version 2.91&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Similar result I also get when I run &lt;code&gt;update-manager&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-08-18T16:45:01.697" Title="Software &amp; Updates and Software Updater won't start" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="6998" PostTypeId="2" ParentId="6990" CreationDate="2016-07-17T11:46:23.723" Score="1" Body="&lt;p&gt;Please consider asking your question on an Arch forum &lt;em&gt;(like &lt;a href=&quot;https://bbs.archlinux.org/index.php&quot; rel=&quot;nofollow&quot;&gt;bbs.archlinux.org&lt;/a&gt;)&lt;/em&gt;, because I'm not sure if these commands apply on Arch.&lt;br&gt;&#xA;On eOS I can use &lt;code&gt;gsettings&lt;/code&gt; to change the keybindings via terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First &lt;code&gt;get&lt;/code&gt; the current binding with your logged in user:&lt;br&gt;&#xA;&lt;code&gt;gsettings get org.gnome.settings-daemon.plugins.media-keys terminal&lt;/code&gt;&lt;br&gt;&#xA;The output is something like:&lt;br&gt;&#xA;&lt;code&gt;'&amp;lt;Primary&amp;gt;&amp;lt;Alt&amp;gt;t'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To change this, you can use:&lt;br&gt;&#xA;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys terminal&lt;/code&gt; &quot;YOUR-KEYS&quot;&lt;br&gt;&#xA;Use the same syntax as in the output earlier and put it in quotation marks. As far as I know, gsettings doesn't check if these keybindings are already in use, so to be sure just try them, before hitting the &lt;code&gt;set&lt;/code&gt; command.&lt;br&gt;&#xA;After that you can rerun the &lt;code&gt;get&lt;/code&gt; command, to check if it worked or hit the keys you specified.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;EDIT:&lt;/em&gt;&lt;/strong&gt; I think, I misunderstood what you want..&lt;br&gt;&#xA;In the case you want to change the default terminal-&lt;em&gt;application&lt;/em&gt;, the commands would be:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Get the current value and the correct syntax:&lt;/em&gt;&lt;br&gt;&#xA;&lt;code&gt;gsettings get org.gnome.desktop.default-applications.terminal exec&lt;/code&gt;&lt;br&gt;&#xA;Example output: &lt;code&gt;'pantheon-terminal'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Set gnome-terminal as default:&lt;/em&gt;&lt;br&gt;&#xA;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec &quot;'gnome-terminal'&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5562" LastEditorUserId="5562" LastEditDate="2016-07-19T12:04:27.140" LastActivityDate="2016-07-19T12:04:27.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7000" PostTypeId="2" ParentId="6954" CreationDate="2016-07-17T17:21:47.957" Score="1" Body="&lt;p&gt;You could try to (re)install the &lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt; package. It helped me with a similiar problem &lt;em&gt;(other touchpad brand, but yours should be also supported by the synaptic driver)&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-17T17:21:47.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7001" PostTypeId="2" ParentId="3127" CreationDate="2016-07-17T22:00:12.290" Score="7" Body="&lt;p&gt;First, use two-factor authorization for your Google account.  This will require you to have your phone each time you want to sign in to Google, but it's a really good idea to be vigilant about your Google credentials.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, you'll notice that because you have set up two-factor authorization, you won't be able to drop the security level in the link above.  Instead, set up an app password for Geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/accounts/answer/185833&quot; rel=&quot;noreferrer&quot;&gt;https://support.google.com/accounts/answer/185833&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5598" LastActivityDate="2016-07-17T22:00:12.290" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7003" PostTypeId="2" ParentId="6755" CreationDate="2016-07-18T05:39:58.953" Score="0" Body="&lt;p&gt;I changed this by going into settings&gt;appearance and then clicking the tab that says &quot;Use Classic Theme&quot;. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="5602" LastActivityDate="2016-07-18T05:39:58.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7004" PostTypeId="2" ParentId="6997" CreationDate="2016-07-18T06:21:48.990" Score="0" Body="&lt;p&gt;Those 2 applications are just graphical front ends for apt. This kind of thing is common with them. Open a terminal, and do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;br&gt;&#xA;sudo apt-get upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may fix or it will tell you what the underlying problem is. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Found an old bug report regarding this. Probably a long shot but make sure  package gir1.2-vte-2.91 is installed. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-07-19T14:37:55.960" LastActivityDate="2016-07-19T14:37:55.960" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="7006" PostTypeId="1" CreationDate="2016-07-18T07:43:55.987" Score="6" ViewCount="1649" Body="&lt;p&gt;I am using dual monitor for my work, currently running mint 18, Now i have question can i use different wallpaper on my both monitor in loki ? &lt;/p&gt;&#xA;" OwnerUserId="5605" LastActivityDate="2018-08-15T17:48:14.600" Title="Can i use different wallpaper in my dual monitor?" Tags="|wallpaper|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7009" PostTypeId="2" ParentId="6989" CreationDate="2016-07-18T19:06:13.580" Score="1" Body="&lt;p&gt;How do you add the PPAs?&lt;br&gt;&#xA;When I use &lt;code&gt;sudo apt-add-repository ppa:mpstark/elementary-tweaks-daily&lt;/code&gt; and do a &lt;code&gt;sudo apt-get update&lt;/code&gt; I'm able to install elementary-tweaks without any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So maybe you're right and something is wrong with your installation file.&lt;br&gt;&#xA;Did you check the SHA256 sum after downloading the iso?&lt;br&gt;&#xA;According to &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow&quot;&gt;ElementaryOS Installation docs&lt;/a&gt; you should do the following to verify the integrity of your file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;In this example the latest 64-bit eOS ISO has been used.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;sha256sum elementaryos-0.3.2-stable-amd64.20151209.iso&lt;/code&gt;&lt;br&gt;&#xA;  The output should be:&#xA;  &lt;code&gt;ee737ffa6bf33b742c5a7cee17aa26dec5ee3b573cbbc4b53cbe2a2513c9197a&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you still have the copy of the ISO you used to install eOS, you can check if the file is corrupt. If so, you have to download the ISO and install eOS again.  &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;EDIT:&lt;/em&gt;&lt;/strong&gt; The links you posted doesn't work for me either. So maybe you just have to correct these in your &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; or the corresponding file in &lt;code&gt;/etc/apt/sources.list.d/...&lt;/code&gt;.&lt;br&gt;&#xA;To be sure, I would remove all the PPAs wich gave you a 404 error and add them with &lt;code&gt;sudo add-apt-repository ppa:example-ppa/abc&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastEditorUserId="5562" LastEditDate="2016-07-18T23:24:19.370" LastActivityDate="2016-07-18T23:24:19.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7010" PostTypeId="2" ParentId="4888" CreationDate="2016-07-18T22:32:10.133" Score="1" Body="&lt;p&gt;It seems that the correct scheme where to find the &lt;code&gt;switch-input&lt;/code&gt; key is:&lt;br&gt;&#xA;&lt;code&gt;org.gnome.desktop.wm.keybindings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I successfully changed the keyboard input keybinding with the following command:&lt;br&gt;&#xA; &lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings switch-input-source &quot;['&amp;lt;Super&amp;gt;f']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, if I press Super+F it changes my keyboard layout.&lt;/p&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-18T22:32:10.133" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7014" PostTypeId="1" CreationDate="2016-07-19T12:52:25.920" Score="1" ViewCount="243" Body="&lt;p&gt;I have my most used apps pinned to the rightmost part of Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the more natural position for me, since I am right-handed and that's where my hand goes when I lower my mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open new apps, they open also &lt;em&gt;to the right&lt;/em&gt; of Plank, which actually &lt;em&gt;moves&lt;/em&gt; the default position of my pinned apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to know if there's a way to force new apps to show in Plank &lt;em&gt;to the leftmost&lt;/em&gt; part of the bar, or at least to the left of some selected group of pinned tabs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this at all possible?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-09-17T17:51:11.407" Title="Show new opened apps icons in Plank to the left?" Tags="|release-freya|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7015" PostTypeId="2" ParentId="7014" CreationDate="2016-07-19T15:48:39.480" Score="2" Body="&lt;p&gt;As far as I can see it's not possible.&lt;br&gt;&#xA;The only way I found to preserve the position of the dock items, is to set the plank alignment to left-aligned or in panel mode with items aligned to the left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But because you want to have your apps aligned to the right, this is probably NOT the way you want it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still want to try it, here is how:&lt;br&gt;&#xA;&lt;em&gt;Option 1&lt;/em&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press Ctrl and perform a right click on the plank&lt;/li&gt;&#xA;&lt;li&gt;Open Settings&lt;/li&gt;&#xA;&lt;li&gt;Set alignment to left-aligned OR select panel-mode &lt;em&gt;Not sure if it's called like that, because I'm using a different language&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;If you selected panel-mode you'll have to set the alignment of the items to left-aligned.&lt;/li&gt;&#xA;&lt;li&gt;Now the plank should be aligned to the left and new apps don't move the apps which are already in the plank.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Option 2:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;~/.config/plank/dock1/settings&lt;/code&gt; with a text editor&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change &lt;code&gt;Alignment=3&lt;/code&gt; to &lt;code&gt;Alignment=1&lt;/code&gt; &lt;em&gt;(for left-aligned)&lt;/em&gt; OR change  &lt;code&gt;Alignment=3&lt;/code&gt; to &lt;code&gt;Alignment=0&lt;/code&gt; &lt;em&gt;(for panel mode)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you choose panel mode, set &lt;code&gt;ItemsAlignment=3&lt;/code&gt; to &lt;code&gt;ItemsAlignment=1&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now the plank should be aligned to the left and new apps don't move the apps which are already in the plank.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5562" LastActivityDate="2016-07-19T15:48:39.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7016" PostTypeId="1" CreationDate="2016-07-19T18:54:28.587" Score="1" ViewCount="123" Body="&lt;p&gt;Just last night (7-18-16) did an os upgrade.  Now the wifi on my HP Stream 13&quot; does not work.  Any Ideas?  And it doesn't have an Ethernet port to download software to.&lt;/p&gt;&#xA;" OwnerUserId="5622" LastActivityDate="2016-07-19T18:54:28.587" Title="no wifi after upgrade" Tags="|wifi|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7018" PostTypeId="1" CreationDate="2016-07-19T20:34:43.650" Score="6" ViewCount="2982" Body="&lt;p&gt;I installed elementary OS Loki last night, and I have noticed that when I login the screen will do some weird glitch and then go to desktop. This also happens sometimes when I switch workplaces. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My other issue is with scrolling in Firefox and watching videos. &#xA;Playing a movie from HDD using VLC the video playback is far from smooth. &#xA;In Firefox while I'm scrolling I get a kind of &quot;invisible line&quot; that I can only describe as screen tearing distorting the text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry if I'm not explaining it well enough, but I'll be happy to answer any questions!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;AMD Athlon X4 860k  &lt;/li&gt;&#xA;&lt;li&gt;8GB DDR3  &lt;/li&gt;&#xA;&lt;li&gt;Radeon 7850 2GB&lt;/li&gt;&#xA;&lt;li&gt;random assortment of HDDs  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5625" LastEditorUserId="84" LastEditDate="2016-11-21T09:05:44.353" LastActivityDate="2016-11-22T19:41:09.387" Title="Screen tearing and graphical glitches in Loki" Tags="|release-loki|display|amd|video-player|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7019" PostTypeId="2" ParentId="6867" CreationDate="2016-07-19T20:42:30.770" Score="1" Body="&lt;p&gt;Workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader':&amp;lt;0&amp;gt;}&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's fixed and should arrive soon. &lt;/p&gt;&#xA;" OwnerUserId="5626" LastActivityDate="2016-07-19T20:42:30.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7021" PostTypeId="1" AcceptedAnswerId="7031" CreationDate="2016-07-20T01:12:09.377" Score="1" ViewCount="1443" Body="&lt;p&gt;I find myself referring back to this reddit page to configure Japanese input on fresh elementary OS installations but it's closed and cannot be edited to include other language inputs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/33cfha/multiple_inputs_under_freya_chinese_case_pinyin/&quot; rel=&quot;nofollow&quot;&gt;https://www.reddit.com/r/elementaryos/comments/33cfha/multiple_inputs_under_freya_chinese_case_pinyin/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to add this to a Wiki post? (with appropriate attribution to the OP on reddit)&lt;/p&gt;&#xA;" OwnerUserId="5205" LastEditorUserId="5205" LastEditDate="2016-07-20T21:32:36.720" LastActivityDate="2020-11-14T06:11:07.627" Title="Wiki post for Japanese and Chinese input" Tags="|release-freya|input|" AnswerCount="1" CommentCount="2" FavoriteCount="0" ClosedDate="2016-07-23T08:23:02.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="7023" PostTypeId="1" CreationDate="2016-07-20T14:13:58.157" Score="1" ViewCount="78" Body="&lt;p&gt;This is something very weird. I am running Elementary OS 0.32 Freya 64-bit (build on Ubuntu 14.04) for a few months now and as such, it comes with Ubuntu's Software Center and Software &amp;amp; Updates applications. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't remember when this first appeared (I practically don't use Software Center nor go to Software &amp;amp; Updates), but as I tried updating after adding the wine builds ppa (&lt;code&gt;ppa:wine/wine-builds&lt;/code&gt;), I got this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch http://ppa.launchpad.net/wine/wine-builds/ubuntu/dists/sid/main/binary-amd64/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://ppa.launchpad.net/wine/wine-builds/ubuntu/dists/sid/main/binary-i386/Packages  404  Not Found&#xA;&#xA;W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/trusty/Release  Unable to find expected entry 'restricted/source/Sources' in Release file (Wrong sources.list entry or malformed file)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When looking at the .list file added in &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;, I noticed that this was what was in there:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/wine/wine-builds/ubuntu sid main&#xA;# deb-src http://ppa.launchpad.net/wine/wine-builds/ubuntu sid main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which I know is not what is supposed to be in there. I corrected the file for the wine ppa (replaced sid by trusty), but each time I add a new ppa, it will have the same format as the one above and I'll have to change it manually every single time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Software &amp;amp; Updates looks like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XJwfT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;Software &amp;amp; Updates&lt;/a&gt; which is also not normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Why could it be that I have 'Debian Software' instead of 'Ubuntu Software', like it was when I originally installed eOS, in my 'Software &amp;amp; Updates' ?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'Software &amp;amp; Updates' basically started doing like if I was running a Debian system, so the servers listed changed to debian servers, etc... However, only that tab provides me with Debian related stuff, the other tabs are all good (updates and the others).&lt;/p&gt;&#xA;" OwnerUserId="5634" LastActivityDate="2016-07-20T14:13:58.157" Title="'Debian Software' tab in Software &amp; Updates" Tags="|release-freya|software-sources|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-28T20:36:54.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="7024" PostTypeId="1" AcceptedAnswerId="7091" CreationDate="2016-07-20T14:32:08.140" Score="0" ViewCount="550" Body="&lt;p&gt;I find the default Loki browser Epiphany to be an excellent choice in many respects, and surely not just by comparison to Midori; it is light (given RAM is cheap), fast and stable, and I can see it as a good choice beside the big ones like Firefox and Chrome/Chromium. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Epiphany (Web) in Freya but it does not have the 'elementary' design it has in Loki. Nor the same smoothness ( -- but then again, this can be subjective rant...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it the same version/package?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the Loki version available in Freya?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-07-29T21:58:31.973" LastActivityDate="2016-07-30T04:39:23.997" Title="Can the Loki version of Epiphany browser be installed in Freya?" Tags="|release-freya|release-loki|epiphany|internet-browser|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7025" PostTypeId="2" ParentId="311" CreationDate="2016-07-20T15:14:12.460" Score="1" Body="&lt;p&gt;Loki beta is available for installation and can be found at &lt;a href=&quot;https://elementary.io/developer&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/developer&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider the limitations inherent to a testing release, described &lt;a href=&quot;http://blog.elementary.io/post/147507276666/loki-beta-2-is-here&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-07-20T15:14:12.460" CommentCount="2" CommunityOwnedDate="2016-07-20T15:14:12.460" ContentLicense="CC BY-SA 3.0" />
  <row Id="7027" PostTypeId="1" CreationDate="2016-07-20T20:03:55.017" Score="0" ViewCount="88" Body="&lt;p&gt;This was noticed today, My system doesn't show the clock(I took a Screen-shot), I run it on an HP Laptop with Intel Core 2 Duo and 3 GB of ram(DDR2).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How I fix to show the clock ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YztM9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YztM9.jpg&quot; alt=&quot;My Desk&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5636" LastEditorUserId="242" LastEditDate="2016-08-01T18:13:53.170" LastActivityDate="2016-12-29T21:54:26.583" Title="Didn't show the clock and slowness" Tags="|graphics|wingpanel|time|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7029" PostTypeId="2" ParentId="7027" CreationDate="2016-07-20T21:03:46.090" Score="0" Body="&lt;p&gt;Did you tried to reinstall indicator-* apps? one of them should bring back clock, but idk which one is responsible for clock. I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="3557" LastActivityDate="2016-07-20T21:03:46.090" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7031" PostTypeId="2" ParentId="7021" CreationDate="2016-07-20T21:31:46.887" Score="1" Body="&lt;p&gt;To quote from the Reddit post:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The best working method is to use fcitx input method framework. The following description is suitable for many different languages, including chinese (pinyin, bopomofo aka zhuyin or chewing, etc.), japanese [anthy, mozc], etc.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Entering Commands&lt;/h2&gt;&#xA;&lt;p&gt;Time to open up your terminal: &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Add fcitx repository&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:fcitx-team/nightly&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Update your sources&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Install fcitx &amp;amp; Language input&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install fcitx fcitx-config-gtk fcitx-table-all&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Chinese: &lt;code&gt;sudo apt-get install fcitx-sunpinyin fcitx-googlepinyin fcitx-module-cloudpinyin fcitx-chewing&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Japanese: &lt;code&gt;sudo apt-get install fcitx-anthy fcitx-mozc&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Install im-config&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install im-config&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Configure input method using im-config&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;im-config&lt;/code&gt;&lt;/p&gt;&#xA;&lt;h2&gt;Quick Reference&lt;/h2&gt;&#xA;&lt;p&gt;Commands for Japanese:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:fcitx-team/nightly&#xA;sudo apt-get update&#xA;sudo apt-get install fcitx fcitx-config-gtk fcitx-table-all&#xA;sudo apt-get install fcitx-anthy fcitx-mozc&#xA;sudo apt-get install im-config&#xA;im-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Commands for Chinese:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:fcitx-team/nightly&#xA;sudo apt-get update&#xA;sudo apt-get install fcitx fcitx-config-gtk fcitx-table-all&#xA;sudo apt-get install fcitx-sunpinyin fcitx-googlepinyin fcitx-module-cloudpinyin fcitx-chewing&#xA;sudo apt-get install im-config&#xA;im-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Interactive Session&lt;/h2&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;Select the correct input method&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;In the window that opened after you typed &lt;code&gt;im-config&lt;/code&gt;, the second line shows which input method is currently in use on your system. If might be : ibus, scim, xim or whatever else. If it shows &amp;quot;missing, default, cjkv or auto&amp;quot; remember it and click &amp;quot;Ok&amp;quot;.&lt;/p&gt;&#xA;&lt;ol start=&quot;7&quot;&gt;&#xA;&lt;li&gt;Update input method or not ?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;-&amp;gt; If at step 6, the line Currently in use on your system was different from &amp;quot;missing, default, cjkv or auto&amp;quot;, click yes and select fcitx input method in the window that will open then click on &amp;quot;Ok&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;-&amp;gt; If at step 6, the line Currently in use on your system was &amp;quot;missing, default, cjkv or auto&amp;quot;, click on &amp;quot;No&amp;quot;.&lt;/p&gt;&#xA;&lt;ol start=&quot;8&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Last windows Click &amp;quot;Yes&amp;quot; ;-).&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &amp;quot;System Settings&amp;quot; -&amp;gt; &amp;quot;Language Settings&amp;quot; and click &amp;quot;complete installation&amp;quot;. Change settings as you wish for date formats and so on then click &amp;quot;Set Language&amp;quot;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart your computer.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;Configuration&lt;/h2&gt;&#xA;&lt;p&gt;hell&lt;/p&gt;&#xA;&lt;p&gt;You will see a new icon on the right up corner that allows you to choose your input.&lt;/p&gt;&#xA;&lt;p&gt;To add wanted inputs :&lt;/p&gt;&#xA;&lt;ol start=&quot;10&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on Configure&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In the new window, click on the plus at the bottom left corner.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Untick &amp;quot;Only show current Language&amp;quot;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Search your favourite input method by name. For example : pinyin, chewing, anthy, mozc, etc.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select it and click Ok for add it&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open any window, hit ctrl+space (default trigger) to switch language and enjoy !&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Other configuration options are available such as changing the Triggers, e.g. to switch between English and Japanese or between Hiragana (ひらがな) and Katakana (カタカナ).&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Many options are available from the input switcher icon in the right top corner icon's menu.&lt;/p&gt;&#xA;&lt;p&gt;As it took me a very long time to find this out, I wanted to share it with everyone.&lt;/p&gt;&#xA;" OwnerUserId="5205" LastEditorUserId="5205" LastEditDate="2020-11-14T06:11:07.627" LastActivityDate="2020-11-14T06:11:07.627" CommentCount="2" CommunityOwnedDate="2016-07-20T21:31:46.887" ContentLicense="CC BY-SA 4.0" />
  <row Id="7032" PostTypeId="2" ParentId="6972" CreationDate="2016-07-21T05:03:33.730" Score="0" Body="&lt;p&gt;solve my issue. After several attempts, my issue was easily solved by launching the program with elevated privilege. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;on terminal :   &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo XMind &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and to make it opening as root when clicked on desktop icon / or plank dock bar &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit file :   &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/usr/share/applications/xmind.desktop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Change Line   &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=XMind&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;to &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=gksudo -k -u root XMind&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;easy ! &lt;/p&gt;&#xA;" OwnerUserId="5571" LastEditorUserId="5571" LastEditDate="2016-07-21T05:49:23.053" LastActivityDate="2016-07-21T05:49:23.053" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7034" PostTypeId="1" CreationDate="2016-07-21T06:55:00.803" Score="0" ViewCount="509" Body="&lt;p&gt;Background: In loki-beta2 I have some troubles with my touchpad. Sometimes my touchpad becomes unresponsive mid-movement until I release finger from touchpad and put it down again. Trial-'n-Error and some comparison to ubuntu yielded that libinput might be involved in this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Questions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Can I disable libinput-driver in loki and go back to stable synaptic-driver? Or will it have negative consequences else where?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If so, what is the proper way to do it? (At the moment I out-commented stuff in &lt;code&gt;/usr/share/X11/xorg.conf.d/90-libinput.conf&lt;/code&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5638" LastActivityDate="2016-10-16T14:47:07.957" Title="touchpad troubles with libinput in loki-beta2" Tags="|touchpad|release-loki|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-19T00:23:48.333" ContentLicense="CC BY-SA 3.0" />
  <row Id="7035" PostTypeId="1" CreationDate="2016-07-21T08:08:01.343" Score="3" ViewCount="8803" Body="&lt;p&gt;I would like to install the Gnome desktop and LXDE on my elementary to gain some more fps on my games also to make it look different and don't get bored of the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is it possible and if it's, is the same as Ubuntu or should i run the other desktop environment via terminal?&lt;/p&gt;&#xA;" OwnerUserId="5519" LastEditorUserId="9" LastEditDate="2016-07-21T13:41:17.733" LastActivityDate="2016-09-19T18:40:02.087" Title="Can I install another desktop environment in elementary OS?" Tags="|desktop|gnome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7036" PostTypeId="1" CreationDate="2016-07-21T12:48:49.870" Score="4" ViewCount="683" Body="&lt;p&gt;I would like the elementary os loki lock-screen clock and the wingpanel clock to show seconds. Is this possible?&lt;/p&gt;&#xA;" OwnerUserId="5642" LastActivityDate="2018-03-29T21:24:17.237" Title="Can the elementary os loki clock display seconds?" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7037" PostTypeId="1" AcceptedAnswerId="7038" CreationDate="2016-07-21T13:49:07.497" Score="1" ViewCount="763" Body="&lt;p&gt;I just saw in a &lt;a href=&quot;https://www.youtube.com/watch?v=XD2O9EF58kI&quot; rel=&quot;nofollow noreferrer&quot;&gt;video&lt;/a&gt; a Mac terminal app with a feature I would really like to have in elementary OS default Terminal app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Capture:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AlBUy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AlBUy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The prompt (little left arrow) is located &lt;em&gt;below&lt;/em&gt; the line that displays the info (user and location). This is particularly useful when the folder one is located into, has a rather long name. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can this be achieved at all with elementary's Terminal app?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-07-21T17:27:01.210" Title="Mac-like terminal prompt?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7038" PostTypeId="2" ParentId="7037" CreationDate="2016-07-21T17:27:01.210" Score="3" Body="&lt;p&gt;Follow these instructions and will have a very similar result (take a look at the &lt;a href=&quot;https://github.com/denysdovhan/spaceship-zsh-theme&quot; rel=&quot;nofollow&quot;&gt;screenshot&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install zsh&#xA;$ sh -c &quot;$(curl -fsSL https://raw.githubusercontent.com/robbyrussell/oh-my-zsh/master/tools/install.sh)&quot;&#xA;$ curl -o - https://raw.githubusercontent.com/denysdovhan/spaceship-zsh-theme/master/install.sh | zsh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open your ~/.zshrc file in an editor.&#xA;Change theme (probably line 8) to &quot;spaceship&quot;:  &lt;code&gt;&quot;ZSH_THEME=&quot;spaceship&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reload your terminal: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ source ~/.zshrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info for zsh here: &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh&quot; rel=&quot;nofollow&quot;&gt;https://github.com/robbyrussell/oh-my-zsh&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;More themes and their installation can be found here: &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes&quot; rel=&quot;nofollow&quot;&gt;https://github.com/robbyrussell/oh-my-zsh/wiki/External-themes&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are many of them. Maybe you find a better one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;After doing this your default shell ist 'zsh'. Follow &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh#uninstalling-oh-my-zsh&quot; rel=&quot;nofollow&quot;&gt;uninstall instructions&lt;/a&gt; if you want to go back to bash!&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2016-07-21T17:27:01.210" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7039" PostTypeId="2" ParentId="7035" CreationDate="2016-07-21T17:42:24.687" Score="3" Body="&lt;p&gt;It's probably possible to remove Pantheon/Granite and install GNOME on elementary OS, but it's also a bad idea. :) Installing GNOME would likely result in an unstable OS. In addition, apps that are designed for Pantheon/Granite may break in GNOME.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd recommend installing a version of Ubuntu that is configured to work with your desktop environment of choice. For LXDE, there's &lt;a href=&quot;http://lubuntu.me/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lubuntu&lt;/a&gt;. For GNOME, there's &lt;a href=&quot;http://ubuntugnome.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu GNOME&lt;/a&gt;. You can install another flavor of Ubuntu alongside elementary, run it on a virtual machine, or boot it from a live CD if you just want to do a test drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For way more details, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4879/test-kde-on-elementary&quot;&gt;this question about installing KDE&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-07-21T17:42:24.687" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7040" PostTypeId="1" CreationDate="2016-07-21T18:37:46.863" Score="0" ViewCount="53" Body="&lt;p&gt;How can I see the actual cursor position? Usually, other editors use the &lt;a href=&quot;https://en.wikipedia.org/wiki/Status_bar&quot; rel=&quot;nofollow&quot;&gt;status bar&lt;/a&gt; for this, but I can not find where is the option to enable it (even checked with the dconf editor).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a plugin for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I'm on ElementaryOS, Freya)&lt;/p&gt;&#xA;" OwnerUserId="5056" LastEditorUserId="5056" LastEditDate="2016-07-21T18:43:34.300" LastActivityDate="2016-08-02T16:19:18.790" Title="Scratch editor: see cursor position" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7041" PostTypeId="2" ParentId="6744" CreationDate="2016-07-21T20:27:14.097" Score="10" Body="&lt;p&gt;According to &lt;a href=&quot;https://twitter.com/elementary/status/730802325967642624&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tweet&lt;/a&gt; from the official elementary OS Twitter account, it won't be possible to directly upgrade. A clean install will be required.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6733/should-i-download-loki-beta-or-freya/&quot;&gt;Should I download loki beta or freya?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-07-21T20:27:14.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7042" PostTypeId="1" CreationDate="2016-07-22T08:14:14.203" Score="1" ViewCount="993" Body="&lt;p&gt;I'am new to Linux and just installed Elementary os. Now I want to install wine but get this message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Package dependencies cannot be resolved This error could be caused by required additional software packages which are missing or not installable. Furthermore there could be a conflict between software packages which are not allowed to be installed at the same time. the following packages have unmet dependencies:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;wine:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried a lot of commands in the terminal wich I found on the internet and here in other questions like sudo &lt;strong&gt;add-apt-repository ppa:ubuntu-wine/ppa -y &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install wine&lt;/strong&gt; but it still doens't want to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my systeem is 64 bit quadcore Intel i3 2350M cpu 2.30Ghz Memory 3,8 Gb Graphics: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)&lt;/p&gt;&#xA;" OwnerUserId="5635" LastActivityDate="2020-06-08T16:37:14.690" Title="Cannot install wine" Tags="|wine|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7043" PostTypeId="1" CreationDate="2016-07-22T09:04:29.250" Score="1" ViewCount="527" Body="&lt;p&gt;I am connected to the Internet but when i want to check for updates I get the following message:&#xA; &lt;a href=&quot;https://i.stack.imgur.com/DbhSG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DbhSG.png&quot; alt=&quot;&amp;quot;Failed to download repository information&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5635" LastEditorUserId="5565" LastEditDate="2016-10-03T18:57:04.013" LastActivityDate="2019-04-23T17:04:20.873" Title="&quot;Failed to download repository information&quot;" Tags="|apt|repositories|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7045" PostTypeId="2" ParentId="7042" CreationDate="2016-07-22T11:41:04.750" Score="1" Body="&lt;p&gt;Try &lt;strong&gt;sudo dpkg --add-architecture i386&lt;/strong&gt; in terminal. &lt;/p&gt;&#xA;" OwnerUserId="4943" LastActivityDate="2016-07-22T11:41:04.750" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="7049" PostTypeId="2" ParentId="6993" CreationDate="2016-07-22T14:54:39.610" Score="1" Body="&lt;pre&gt;&lt;code&gt;elementaryos-0.4-beta2-amd64.20160716.iso&#xA;9454aff1631e68d5a69493ffba94542d0fcea7ed7d0b6d3e13c3bbac6ae46059 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-07-22T14:54:39.610" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7051" PostTypeId="2" ParentId="6947" CreationDate="2016-07-22T16:21:32.827" Score="1" Body="&lt;p&gt;Thanks for the info. &#xA;I tried a few linux distribution with different desktops. &#xA;Here are the results. &#xA;In Linux mint with xfce  the windows move very slow and keep moving even if I let the mouse button go. Wit the option of hiding windows content while moving them, it works fine.&#xA;I also tried debian. XFce is the same. &#xA;Openbox is also not working. Windows move slow and keep moving if I let the mouse button go. Openbox has no option for hiding windos content while a window is moved, so openbox does not work for me. &#xA;I also tried the Mate desktop. To my surprise it works better than Openbox. When I enable window compositing it works the best. That is really a surprise. I think the limitation on this machine is not memory but cpu usage.&#xA;So I ended up with debian Mate and windows compositing.&#xA;It looks like it is a bit lighter than Linux mint.&#xA;I can even play DVD's it only starts chopping when I touch the mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is surprising to me is that elementary Os is heavier on cpu than Linux Mint and Debian while it is supposed to be light weight!&lt;/p&gt;&#xA;" OwnerUserId="5551" LastActivityDate="2016-07-22T16:21:32.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7053" PostTypeId="1" CreationDate="2016-07-23T07:16:49.187" Score="2" ViewCount="667" Body="&lt;p&gt;I have multiple partitions; three of them are EXT4 and have a Linux system installed on them; two of them are NTFS and one of them has Windows 7 installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second NTFS partition is almost half of the entire drive and is the only one that is not hosting an OS. It is a sort of deposit where I store text, image and multimedia files accessible from all installed OS-es and where most copying &amp;amp; pasting takes place.  &lt;strong&gt;Only on this one&lt;/strong&gt; an odd thing happens (and &lt;strong&gt;only in elementary OS&lt;/strong&gt;): when I drag &amp;amp; drop selected files onto a folder (same directory level), the files are &lt;strong&gt;copied&lt;/strong&gt; (like copy-paste) &lt;strong&gt;instead of being moved&lt;/strong&gt; (like cut-paste). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On all the other partitions (ntfs and ext4), drag+drop=move.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(With the right mouse drag&amp;amp;drop opens the dialog that asks what to do, and then &lt;em&gt;move&lt;/em&gt; works.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tested this in both Freya and Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can be the cause? How could I investigate this farther?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt; after testing other file managers:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;This also happens in Thunar - therefore not &lt;code&gt;panthon-files&lt;/code&gt;-specific&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This doesn't happen in PCManFM&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-29T12:14:04.650" LastActivityDate="2016-11-29T12:14:04.650" Title="Why on a single partition drag &amp; drop is 'copy' instead of 'move' in Pantheon-Files?" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7055" PostTypeId="2" ParentId="3808" CreationDate="2016-07-23T10:42:52.447" Score="2" Body="&lt;p&gt;If what you mean is &lt;strong&gt;&lt;em&gt;actions that can be triggered from the context menu of the file manager, after selecting one or more files or folders&lt;/em&gt;&lt;/strong&gt;, I don't know if the proper name is &lt;em&gt;&quot;extensions&quot;&lt;/em&gt;, but &lt;code&gt;.contract&lt;/code&gt; files can be created in &lt;code&gt;usr/share/contract&lt;/code&gt; to add context menu entries to Pantheon-Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, the general answer to your question is &quot;&lt;strong&gt;Yes&lt;/strong&gt;&quot;. But if you mean whether you can find ready-made &lt;code&gt;.contract&lt;/code&gt; files on the internet to download and use, the answer is rather negative.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;About mentioning &lt;em&gt;all&lt;/em&gt; of them:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suppose the list you get in Nautilus with the command you mention is the list of scripts/extensions that are already installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To see the one present in Pantheon Files take a look in &lt;code&gt;/usr/share/contractor&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As said in a comment, there is no exhaustive list for these context-menu actions: first, because, as far as I can tell for the moment, there are no such ready-made &lt;code&gt;.contract&lt;/code&gt; files to be found on the internet available for download, as you have for Nautilus or Thunar; second, as they &lt;strong&gt;can be created&lt;/strong&gt; for the specific commands that you want applied to different files or folders, they are too many to list, because they are as many as the possible applicable commands that may involve different executable files/scripts.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;About mentioning a &lt;em&gt;few&lt;/em&gt; of them:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some of the ones I have used: some to play/open in different programs, to convert, to extract audio without conversion, to display media info or mime-type, to run an executable file, to search, to join... Most of these are mentioned on this site or on U&amp;amp;L stackexchange. (For example: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3295/170&quot;&gt;here&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/q/264/170&quot;&gt;here&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/q/49/170&quot;&gt;here&lt;/a&gt; or &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3788/170&quot;&gt;here&lt;/a&gt;; also: &lt;a href=&quot;https://unix.stackexchange.com/q/192158/32012&quot;&gt;here&lt;/a&gt;). If you need a certain context-menu action in Files, you can search on such sites or post here a question asking for that. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To create a new one the procedure is something similar to the following one, an example which adds a search option with &lt;em&gt;Catfish&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With &lt;code&gt;gedit&lt;/code&gt; as text editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/catfish_search.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Paste this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Search Here&#xA;Description=Find files&#xA;MimeType=inode;&#xA;Exec=catfish --path=%f %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and close text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/DyIuH.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/zU4JV.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-11-04T16:16:47.543" LastActivityDate="2017-11-04T16:16:47.543" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7057" PostTypeId="1" CreationDate="2016-07-23T11:21:47.857" Score="1" ViewCount="703" Body="&lt;p&gt;Is it still possible to connect through the network applet somehow? I installed network-manager-openvpn-gnome, but I can't find anything in the network settings. There is only the &quot;Proxy&quot; option under virtual. &#xA;Has support for managing VPN connections through GUI been dropped?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="3980" LastActivityDate="2016-07-24T18:30:41.810" Title="Can I connect to my VPN through GUI in Loki beta" Tags="|settings|release-loki|networking|openvpn|vpn|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7058" PostTypeId="1" CreationDate="2016-07-23T11:59:13.590" Score="2" ViewCount="133" Body="&lt;p&gt;I know that there a plenty of questions here on how to &lt;em&gt;disable&lt;/em&gt; the single-click behaviour of the &lt;em&gt;Pantheon file manager&lt;/em&gt;. But, in fact, I really like it, and I'm rather confused by the fact, that this behaviour is implemented inconsistently in Freya: Particularly, we still have to use a double click to choose a file in a &lt;em&gt;dialog&lt;/em&gt;. This is highly inconvenient. Can the single-click behaviour be enabled for the file chooser dialogs too?&lt;/p&gt;&#xA;" OwnerUserId="2467" LastActivityDate="2016-07-23T20:09:56.013" Title="How to enable Pantheon's single-click behavior for the file chooser dialogs?" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7062" PostTypeId="2" ParentId="7058" CreationDate="2016-07-23T20:09:56.013" Score="2" Body="&lt;p&gt;The Pantheon file-chooser still uses the native Gtk Filechooser widget and this seems to hard code the double click behaviour. So it is not possible to change this at present by changing a setting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be possible however to amend the coding for Pantheon filechooser so that it sets the behaviour to match that setting for Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A bug report will need to be raised concerning this at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-07-23T20:09:56.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7064" PostTypeId="1" AcceptedAnswerId="7065" CreationDate="2016-07-24T15:09:40.940" Score="0" ViewCount="702" Body="&lt;p&gt;I recently installed a program called nemo which is a file manager meant to replace the default GNOME files manager. I installed it using the tutorial and it said that if I wanted to remove the desktop overlay after using nemo, I would type the command  nemo --no-desktop. For some reason however whenever I log out and log back in I get a transparent desktop window which I can not remove by clicking the close button. Is there a command or anything that can fix this? If not then I am also not sure how to uninstall the nemo program in order to keep the GNOME files manager. I did not install through the software center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got the tutorial from &lt;a href=&quot;https://www.linux.com/learn/7-elementary-os-freya-tweaks-make-platform-even-better&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; (scroll down to where it shows nemo).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ddkZH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ddkZH.jpg&quot; alt=&quot;desktop overlay error&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerDisplayName="user5657" LastActivityDate="2017-02-05T07:48:02.077" Title="How to Remove Desktop Overlay in elementary OS Freya" Tags="|release-freya|keyboard|keyboard-shortcuts|desktop|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7065" PostTypeId="2" ParentId="7064" CreationDate="2016-07-24T18:04:47.083" Score="2" Body="&lt;p&gt;To close that annoying desktop windows, type in terminal &quot;&lt;strong&gt;nemo --quit&lt;/strong&gt;&quot; (without quotes)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then to make sure this does not happen again, type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&lt;strong&gt;gsettings set org.nemo.desktop show-desktop-icons false&lt;/strong&gt;&quot; (without quotes)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem happens because when you start nemo file manager, it will attempt to manage your desktop (which you do not want, considering the Elementary OS Freya desktop cannot work with a third-party manager).&lt;/p&gt;&#xA;" OwnerUserId="5663" LastActivityDate="2016-07-24T18:04:47.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7066" PostTypeId="2" ParentId="7057" CreationDate="2016-07-24T18:30:41.810" Score="2" Body="&lt;p&gt;Currently elementaryOS's Switchboard Network Plug doesn't support VPN connections.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This question have been previously asked before (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5495/no-gui-access-to-vpn-connections-openvpn-16-04-loki-beta-daily-ppa&quot;&gt;No GUI Access to VPN Connections | OpenVPN | 16.04 Loki Beta Daily PPA&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since then the Devs have been notified and currently there are 2 bug reports about this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-networking/+bug/1416249&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/switchboard-plug-networking/+bug/1416249&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-networking/+bug/1427248&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/switchboard-plug-networking/+bug/1427248&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Keep in mind that Loki is still in beta and under development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can only advise you to check the above bug reports and mark them as &quot;&lt;strong&gt;Yes, it affects me&lt;/strong&gt;&quot; under &quot;&lt;strong&gt;This bug affects # persons. Does this bug affect you?&lt;/strong&gt;&quot;&lt;/p&gt;&#xA;" OwnerUserId="668" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-07-24T18:30:41.810" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7067" PostTypeId="1" AcceptedAnswerId="7411" CreationDate="2016-07-24T18:43:59.853" Score="1" ViewCount="1783" Body="&lt;p&gt;I tried to install the editor Brackets using the originial .deb from the website, but dpkg and apt failed to do so.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo dpkg -i Brackets.deb &#xA;Selecting previously unselected package brackets.&#xA;(Reading database ... 264099 files and directories currently installed.)&#xA;Preparing to unpack Brackets.deb ...&#xA;Unpacking brackets (1.7.0-16898) ...&#xA;dpkg: dependency problems prevent configuration of brackets:&#xA; brackets depends on libgcrypt11 (&amp;gt;= 1.4.5); however:&#xA;  Package libgcrypt11 is not installed.&#xA;&#xA;dpkg: error processing package brackets (--install):&#xA; dependency problems - leaving unconfigured&#xA;Processing triggers for hicolor-icon-theme (0.15-0ubuntu1) ...&#xA;Errors were encountered while processing:&#xA; brackets&#xA;&#xA;$ sudo apt-get install brackets &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;brackets is already the newest version (1.7.0-16898).&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; brackets : Depends: libgcrypt11 (&amp;gt;= 1.4.5) but it is not installable&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I install brackets? I've already installed libgcrypt11-dev and libgcrypt20&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install libgcrypt20 libgcrypt11-dev &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;libgcrypt11-dev is already the newest version (1.5.4-3+really1.6.5-2).&#xA;libgcrypt20 is already the newest version (1.6.5-2).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5274" LastActivityDate="2017-10-06T15:31:49.553" Title="Install Brackets" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7069" PostTypeId="1" AcceptedAnswerId="7070" CreationDate="2016-07-25T11:02:41.187" Score="0" ViewCount="413" Body="&lt;p&gt;Does anyone know how to install PeaZip on elementaryOS?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the following error when I try to install the .deb file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;The package is of bad quality&quot;&lt;/p&gt;&#xA;" OwnerUserId="5278" LastActivityDate="2016-07-25T11:11:29.753" Title="How to install PeaZip" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7070" PostTypeId="2" ParentId="7069" CreationDate="2016-07-25T11:11:29.753" Score="1" Body="&lt;p&gt;I successfully installed it with dpkg and gdebi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure to use this link &lt;a href=&quot;https://osdn.jp/dl/peazip/peazip_6.1.0.LINUX.GTK2-2_i386.deb&quot; rel=&quot;nofollow&quot;&gt;https://osdn.jp/dl/peazip/peazip_6.1.0.LINUX.GTK2-2_i386.deb&lt;/a&gt; (taken from the download page &lt;a href=&quot;http://www.peazip.org/peazip-linux.html&quot; rel=&quot;nofollow&quot;&gt;http://www.peazip.org/peazip-linux.html&lt;/a&gt;, DEB link under the GTK 2 category)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Installation with dpkg&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From a terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i peazip_6.1.0.LINUX.GTK2-2_i386.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Installation with gdebi&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Be sure to have the package gdebi-gtk &lt;code&gt;sudo apt-get install gdebi-gtk&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From Files :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right-click &gt; Open with &gt; gdebi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click Install&lt;/p&gt;&#xA;" OwnerUserId="2731" LastActivityDate="2016-07-25T11:11:29.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7071" PostTypeId="1" CreationDate="2016-07-25T17:43:06.700" Score="0" ViewCount="1218" Body="&lt;p&gt;my question may seem a bit plain, but to those who have tested the loki beta already: What is your impression? Is is faster and slimer than freya?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed freya a few months ago on my laptop bercause I got told its one of the fastest and lightest Linux distros (excpet of cause those without a GUI). I am very happy so far, because it kept up to those promises and runs like a charm on my laptop with limited resources, worked very well out of the box and well on top is nice to look at.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So to those who have used the beta so far: Whats your impression? Did Loki improve regarding to speed and lightweightness?&lt;/p&gt;&#xA;" OwnerUserId="4992" LastActivityDate="2016-08-25T12:30:31.083" Title="Is Loki faster and slimmer than Freya?" Tags="|release-freya|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-14T19:48:40.160" ContentLicense="CC BY-SA 3.0" />
  <row Id="7072" PostTypeId="2" ParentId="7071" CreationDate="2016-07-26T11:40:12.017" Score="1" Body="&lt;p&gt;Just by seeing beta release, we can't say anything about speed and resource affinity of a distribution. Because, beta release usually comes with a lot of debugging flags enabled which significantly affects performance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally, what I felt is that &lt;code&gt;Loki&lt;/code&gt; is more resource consuming, but I don't have any statistical information to prove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wait for the final release, and then you can decide which one is better in terms of resources usage and speed.&lt;/p&gt;&#xA;" OwnerUserId="5213" LastActivityDate="2016-07-26T11:40:12.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7074" PostTypeId="2" ParentId="6820" CreationDate="2016-07-26T17:50:25.430" Score="1" Body="&lt;p&gt;To install elementary OS without installing the GRUB boot loader:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot up an installation media an select &quot;Try elementary OS&quot;. This will load a live session instead of loading the installer directly.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal and enter the following command. This will launch the installer with the option to not install the boot loader:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ubiquity -b&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Continue installation as normal. The GRUB boot loader will not be installed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-07-26T17:50:25.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7076" PostTypeId="1" CreationDate="2016-07-27T09:15:24.090" Score="0" ViewCount="305" Body="&lt;p&gt;I have problems importing a CD with noise. The music player is showing  every title, but when I click on the import button nothing happened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;" OwnerUserId="5109" LastActivityDate="2016-09-18T14:11:46.727" Title="Import Audio CD is not working" Tags="|music|audio-cd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7077" PostTypeId="2" ParentId="6820" CreationDate="2016-07-27T09:50:36.830" Score="1" Body="&lt;p&gt;I would suggest you to install grub to the partition where you install your eos. You can select grub partition while partitioning your hdd. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lXywI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lXywI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then update your grub from Arch Linux using &lt;code&gt;sudo update-grub&lt;/code&gt;. (&lt;a href=&quot;https://askubuntu.com/a/281163/556428&quot;&gt;Then hide your eos grub if needed&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="5682" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-07-27T10:30:19.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7078" PostTypeId="2" ParentId="7036" CreationDate="2016-07-27T15:06:10.847" Score="4" Body="&lt;p&gt;No, right now it is not possible to display seconds.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-07-27T15:06:10.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7079" PostTypeId="1" CreationDate="2016-07-27T18:05:07.367" Score="5" ViewCount="1104" Body="&lt;p&gt;I was cleaning up some unneeded files in my Rails project when I accidentally deleted files that are VERY important to my project. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realized my mistake and went to the Trash and found what I needed to get back. I right-clicked and picked &quot;Restore from Trash&quot;. The file system crashed and I don't have any of my files back. I tried this maybe 50 times along with just clicking &quot;Restore All&quot;. Same result, the window crashes every time. There is a tiny lock next to the folder I need and as far as I can tell every other folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="3159" LastEditorUserId="5565" LastEditDate="2016-09-27T21:28:13.470" LastActivityDate="2016-10-27T21:56:25.220" Title="How do I restore locked files from Trash?" Tags="|pantheon-files|files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7080" PostTypeId="1" AcceptedAnswerId="7123" CreationDate="2016-07-27T20:44:32.557" Score="1" ViewCount="380" Body="&lt;p&gt;I have downloaded the Elementary OS from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/&lt;/a&gt; and am wanting to remaster it to add additional packages such as LAMP Stack.  I am looking at the tutorial here &lt;a href=&quot;https://help.ubuntu.com/community/InstallCDCustomization&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/InstallCDCustomization&lt;/a&gt; but I do not see a pre seed file?  (step after extracting the .iso to my hard drive)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I doing something incorrect here?&lt;/p&gt;&#xA;" OwnerUserId="5685" LastActivityDate="2016-08-02T14:58:02.697" Title="Remastering Iso" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7081" PostTypeId="1" CreationDate="2016-07-28T02:10:59.253" Score="1" ViewCount="225" Body="&lt;p&gt;I guys,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can some one please tell me or give a recipt, about, how to do a dual boot of elementary OS and macbook pro retina 2013, OSX Capitan? is necessary reFInd? how do I do that? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I search on a lot of web pages and I find sevel task ads steps, but no one do really.. sometimes work and others not :(.&#xA;I found that depends of several thing like version of OSX, year of laptop, drivers, SIP restriction on Capitan OSX over REFIND, and so on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance guys!&lt;/p&gt;&#xA;" OwnerUserId="5687" LastActivityDate="2016-07-28T02:10:59.253" Title="dualboot macbook pro retina 2013" Tags="|dual-boot|macbook|refind|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7082" PostTypeId="1" AcceptedAnswerId="7109" CreationDate="2016-07-28T09:37:59.153" Score="1" ViewCount="66" Body="&lt;p&gt;I was wondering, why the files dropped under &lt;code&gt;~/Templates&lt;/code&gt; do not appear in the &quot;New&quot; context menu of Pantheon files. While investigating this, I came across the following bug report:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1356235&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1356235&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says, that this issue has been fixed for Pantheon files 0.2. The version of my &lt;code&gt;pantheon-files&lt;/code&gt; package is &lt;code&gt;0.2.4-0~r1980+pkg47~ubuntu0.3.1.1&lt;/code&gt;, according to &lt;code&gt;apt&lt;/code&gt;. So why does Pantheon only offer &quot;Directory&quot; and &quot;Empty file&quot; in its &quot;New&quot; context menu, while there is a &lt;code&gt;Letter.tex&lt;/code&gt; file in my &lt;code&gt;~/Templates&lt;/code&gt; directory?&lt;/p&gt;&#xA;" OwnerUserId="2467" LastEditorUserId="2467" LastEditDate="2016-07-28T10:31:17.360" LastActivityDate="2016-07-31T13:15:01.743" Title="Why is the &quot;Templates&quot; directory still not working in Freya's Pantheon files?" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7084" PostTypeId="2" ParentId="6852" CreationDate="2016-07-28T14:01:15.223" Score="0" Body="&lt;p&gt;You can have Photoshop CS6 on elementaryOS with PlayOnLinux : &lt;a href=&quot;https://www.playonlinux.com/en/app-2316-Adobe_Photoshop_CS6.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.playonlinux.com/en/app-2316-Adobe_Photoshop_CS6.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First install PlayOnLinux &lt;a href=&quot;https://www.playonlinux.com/en/download.html#pres_item6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.playonlinux.com/en/download.html#pres_item6&lt;/a&gt;, follow the instructions in the Ubuntu Trusty Category.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then open PlayOnLinux and click the button &quot;Install&quot;, then search for &quot;photoshop&quot; and follow the instructions !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screens from my computer :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U6dPe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U6dPe.png&quot; alt=&quot;Photoshop on Linux&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7mPO6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7mPO6.png&quot; alt=&quot;PlayOnLinux with Windows softwares&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2731" LastActivityDate="2016-07-28T14:01:15.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7085" PostTypeId="2" ParentId="6969" CreationDate="2016-07-28T14:14:09.730" Score="2" Body="&lt;p&gt;No.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AMD dropped the &lt;code&gt;flgrx&lt;/code&gt; support for the version of the Xorg server that Ubuntu 16.04 ships with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://lists.ubuntu.com/archives/ubuntu-devel-discuss/2016-March/016315.html&quot; rel=&quot;nofollow&quot;&gt;https://lists.ubuntu.com/archives/ubuntu-devel-discuss/2016-March/016315.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="138" LastActivityDate="2016-07-28T14:14:09.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7086" PostTypeId="1" CreationDate="2016-07-28T20:55:42.347" Score="2" ViewCount="502" Body="&lt;p&gt;I 'm new to Elementary OS , I'm adapting to the desktop and to their way of seeing things &quot;I have a few questions . :&#xA;One is whether there is any way to put a new folder in the area of personal directories Files Pantheon &lt;a href=&quot;https://i.stack.imgur.com/GB1nL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GB1nL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA; , I wanted to put a new one that &quot;Work&quot; is called, know how I can do.&#xA;The other question is if I set for documents showing the type icon extension instead of a preliminary vistra .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A greeting.&lt;/p&gt;&#xA;" OwnerUserId="5691" LastActivityDate="2016-10-29T00:15:18.167" Title="add directory pantheon files" Tags="|pantheon|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7088" PostTypeId="2" ParentId="7086" CreationDate="2016-07-29T08:04:34.230" Score="0" Body="&lt;p&gt;Right click on the folder you want to add and left click 'bookmark' in the menu that appears.&lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-07-29T08:04:34.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7089" PostTypeId="1" CreationDate="2016-07-29T10:03:06.897" Score="1" ViewCount="38" Body="&lt;p&gt;when I try to connect my computer to the TV and mirror the screens I'm starting to see problems, especially after I do a restart. Problems like: the resolution seems to be low, everything is in big size. On one screen the cursor is visible and on the other it is not. Sometimes I can't even open the setting.&#xA;I'm really frustrated with this problem. I have an AMD GPU and I tried installing drivers and trying different settings with the AMD control setting but nothing worked. &#xA;Please help me solve this problem. I just want to be able to duplicate the two displays. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S: I don't have problems with either screens or cables because I was able to do it without any problems  on Windows and Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="5697" LastActivityDate="2016-07-29T10:03:06.897" Title="I'm having trouble connecting my TV to my computer" Tags="|display|desktop|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-05T19:25:23.113" ContentLicense="CC BY-SA 3.0" />
  <row Id="7090" PostTypeId="2" ParentId="7079" CreationDate="2016-07-29T17:15:59.097" Score="0" Body="&lt;p&gt;Try opening Files as administrator and restoring that way:&lt;p&gt;&#xA;Open Applications&lt;p&gt;&#xA;Right click on Files and click New window as Administrator&lt;p&gt;&#xA;Try to restore/copy that way&lt;p&gt;&#xA;or&lt;p&gt;&#xA;In terminal &lt;p&gt;&#xA;sudo mv /home/your_username/.local/share/Trash/your_file /your-restore/location&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-07-29T17:15:59.097" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7091" PostTypeId="2" ParentId="7024" CreationDate="2016-07-29T17:27:22.027" Score="2" Body="&lt;p&gt;Probably not because epiphany in Loki uses gtk3.18. Freya uses 3.14. I've run into that issue with a couple of other programs.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-07-29T17:27:22.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7092" PostTypeId="2" ParentId="7086" CreationDate="2016-07-29T18:04:09.703" Score="2" Body="&lt;p&gt;Click on &quot;Carpeta Personal&quot;, create your Work file in Home (or wherever you want). Then right-click that new file and left click on Bookmark (or for you it's probably &quot;Marcador&quot; or something like that). Then it should be available on the left-hand panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a little slideshow for you: &lt;a href=&quot;https://goo.gl/photos/Zvk4KbZ3iMnHkJH36&quot; rel=&quot;nofollow&quot;&gt;https://goo.gl/photos/Zvk4KbZ3iMnHkJH36&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="423" LastEditDate="2016-07-29T18:15:07.607" LastActivityDate="2016-07-29T18:15:07.607" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7094" PostTypeId="2" ParentId="7024" CreationDate="2016-07-30T04:39:23.997" Score="1" Body="&lt;p&gt;No. I am not running either at the moment (And I usually run the latest packages from the daily PPA on top of the latest available Ubuntu version), but I can pretty much assure you they are different versions of the same browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Epiphany is being actively developed by the Gnome developers and thus you will find that there are many differences between the version in Freya (which IIRC is 3.14 or 3.16) and Loki, (which is most likely 3.20).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your best bet is to simply wait on Loki :)&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-07-30T04:39:23.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7095" PostTypeId="2" ParentId="3497" CreationDate="2016-07-30T04:43:38.517" Score="1" Body="&lt;p&gt;Try disabling Alt-Spacebar as a hotkey for toggling maximized or any other entry, this should revert Alt-Space behavior to what you are accustomed to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default for me Alt-Spacebar was mapped to Next Keyboard Layout in &lt;em&gt;Keyboard&lt;/em&gt; &gt; &lt;em&gt;Universal&lt;/em&gt; Access, by disabling this the window menu took over properly.&lt;/p&gt;&#xA;" OwnerUserId="5700" LastEditorUserId="5700" LastEditDate="2017-03-02T23:45:04.657" LastActivityDate="2017-03-02T23:45:04.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7097" PostTypeId="2" ParentId="2982" CreationDate="2016-07-30T09:08:19.347" Score="1" Body="&lt;p&gt;Boot using the recovery option in your grub.&#xA;Then open a terminal window and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;nomodeset&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT:&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should now look like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=5&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save it with Ctrl+o then exit with Ctrl+x&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then update your grub using&#xA;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you'll be able to boot without having to select the recovery option.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-07-30T09:08:19.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7098" PostTypeId="2" ParentId="7067" CreationDate="2016-07-30T09:14:59.970" Score="0" Body="&lt;p&gt;run &lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then re-run the deb installation using dpkg.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;code&gt;man apt-get&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-f, --fix-broken&#xA;        Fix; attempt to correct a system with broken dependencies in&#xA;        place. This option, when used with install/remove, can omit any&#xA;        packages to permit APT to deduce a likely solution. If packages &#xA;        are specified, these have to completely correct the problem. The &#xA;        option is sometimes necessary when running APT for the first &#xA;        time; APT itself does not allow broken package dependencies to &#xA;        exist on a system. It is possible that a system's dependency &#xA;        structure can be so corrupt as to require manual intervention &#xA;        (which usually means using dpkg --remove to eliminate some of the &#xA;        offending packages). Use of this option together with -m may &#xA;        produce an error in some situations. Configuration Item: &#xA;        APT::Get::Fix-Broken.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In simple words this will install all the dependencies that is preventing you from installing your deb.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastEditorUserId="-1" LastEditDate="2016-08-03T05:19:30.773" LastActivityDate="2016-08-03T05:19:30.773" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7100" PostTypeId="1" CreationDate="2016-07-30T13:33:25.123" Score="2" ViewCount="521" Body="&lt;p&gt;Does the elementary OS provide flexibility in time formats (for example, a format such as yyyy MM dd hh mm ss zzz (UTC)) similar to those that are available in Kubuntu 14.04?&lt;/p&gt;&#xA;" OwnerUserId="5703" LastActivityDate="2016-09-17T14:46:26.183" Title="Time Formats (such as yyyy MM dd hh mm ss zzz (UTC))" Tags="|settings|time|format|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7102" PostTypeId="2" ParentId="6753" CreationDate="2016-07-30T19:56:11.250" Score="2" Body="&lt;p&gt;I tried to install a dozen times to no avail. ASUS laptop x54c. UNetBootin/USB AND actual DVD burned with K3b. Finally loaded 'liveCD' via USB and installed from desktop icon AFTER successful connection to internet. VioLA! (I love LA)&lt;/p&gt;&#xA;" OwnerUserId="5705" LastActivityDate="2016-07-30T19:56:11.250" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7104" PostTypeId="1" AcceptedAnswerId="10770" CreationDate="2016-07-31T03:08:54.930" Score="1" ViewCount="512" Body="&lt;p&gt;I am not able to see the notification in the notification area for Pidgin chat. Not sure why. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When all Pidgin windows are closed it stays open I think but I am not always sure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used Kadu and it worked in the notification area, but I stopped using it because it kept crashing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not a huge deal, but I have to keep the roster window open all the time... Thanks!&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorDisplayName="user170" LastEditDate="2017-02-17T11:54:49.650" LastActivityDate="2017-02-17T13:19:06.357" Title="Pidgin indicator missing" Tags="|release-loki|wingpanel|applications|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7105" PostTypeId="1" AcceptedAnswerId="7146" CreationDate="2016-07-31T05:39:36.477" Score="7" ViewCount="1423" Body="&lt;p&gt;Today I checked for any software updates available for &lt;code&gt;elementary OS Freya&lt;/code&gt; through the &lt;code&gt;Software Updater&lt;/code&gt; which is provided by the system. Then it notified that my system is up to date but however &lt;code&gt;elementary 16.04.1 lts&lt;/code&gt; is now available and it asked me to upgrade the system. To get the complete image file [&lt;code&gt;ISO&lt;/code&gt;] I went to elementary OS official &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;noreferrer&quot;&gt;website&lt;/a&gt;, but in there it provides only the &lt;code&gt;Freya&lt;/code&gt; release. Why is that and if I upgrade through the &lt;code&gt;Software updater&lt;/code&gt;will my machine be upgraded to the &lt;code&gt;Loki beta&lt;/code&gt; version or the &lt;code&gt;lts&lt;/code&gt; version. I am little confused as &lt;code&gt;lts&lt;/code&gt; version is still not provided in the official website.&lt;a href=&quot;https://i.stack.imgur.com/KLLCw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KLLCw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3955" LastEditorUserId="26" LastEditDate="2016-09-12T15:53:31.360" LastActivityDate="2016-09-12T15:53:31.360" Title="Is it safe to upgrade to a new ubuntu base with the Software Updater?" Tags="|updates|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7106" PostTypeId="1" CreationDate="2016-07-31T06:40:57.773" Score="2" ViewCount="430" Body="&lt;p&gt;In May my elementary OS network stopped working. I cannot connect to wifi or Ethernet. It seems the last update caused the network problem. Looking for the solution I came across this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4183/how-can-i-fix-networking-wi-fi-and-ethernet-not-being-available-after-update&quot;&gt;How can I fix Networking, Wi-Fi and Ethernet, not being available after update?&lt;/a&gt; &#xA;I want to fix my network issues but I am having trouble understanding Step 2: Downgrade the Packages and Restart the Service.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am still very new using non-windows/OSX operating systems such as linux. Can somebody explain to how exactly to downgrade the libnl packages? I have downloaded and saved the 3 libnl packages (from the link above) in my documents folder in elementary OS. I have tried to run &lt;code&gt;sudo dpkg -i libnl-*deb&lt;/code&gt; command in terminal then I'm prompted to enter my password. I enter my password and I receive this error. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; dpkg: error processing archive libnl-*deb (--intall):&#xA;&amp;gt;  cannot access archive: No such file or directory &#xA;&amp;gt; Errors were encountered while processing: &#xA;&amp;gt;  libnl-*deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am not entirely sure what I'm suppose to do. Can somebody help me out with a simple noob step-by-step guide. I really like using elementary OS but I can't seem to figure this out. Help would be appreciated thanks. &lt;/p&gt;&#xA;" OwnerUserId="5708" LastActivityDate="2016-08-04T06:43:35.557" Title="How to downgrade libnl packages to fix network manager?" Tags="|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7107" PostTypeId="1" CreationDate="2016-07-31T10:06:29.697" Score="1" ViewCount="176" Body="&lt;p&gt;good morning , I have a question with the theme of the icons is as follows , I would like my files I have , if they are a pdf I display an icon indicating that it is a pdf, not to show me the preview, anyone knows how you can change ?.&#xA;A greeting.&lt;/p&gt;&#xA;" OwnerUserId="5691" LastActivityDate="2016-10-01T10:49:44.937" Title="Icon of documents" Tags="|pantheon-files|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7108" PostTypeId="1" CreationDate="2016-07-31T10:41:39.027" Score="1" ViewCount="186" Body="&lt;p&gt;I successfully installed elementary OS, but i get the following error when i boot the os. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*ERROR* UVD not responding, trying to reset the VCPU!!!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have an AMD radoen hd 6000 graphics card and Intel 3000 series inbuilt graphics card, but the amd graphic card does not work at all which is one of the reason for this error to occur. I bypassed the error by setting nomodeset but this allows the OS to work without the graphic card and also i use dual screen which does not work when nomodset is set.&#xA;Please advise me , i need to the OS to run with intel inbuilt graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I am using Hp laptop.&lt;/p&gt;&#xA;" OwnerUserId="5713" LastActivityDate="2016-07-31T10:41:39.027" Title="elementary os uvd error" Tags="|boot|amd|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="7109" PostTypeId="2" ParentId="7082" CreationDate="2016-07-31T13:15:01.743" Score="0" Body="&lt;p&gt;It appears to be &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1608229&quot; rel=&quot;nofollow&quot;&gt;another localization-related bug in Pantheon files&lt;/a&gt; that needs to be fixed. In the meantime, the following work-around has proven to work: Rename your &lt;code&gt;~/Templates&lt;/code&gt; directory, where &lt;code&gt;Templates&lt;/code&gt; refers to whatever the word for &quot;templates&quot; in your language of choice is, such that this directory's name actually becomes the english word &lt;code&gt;Templates&lt;/code&gt;. So for example, if you're on a German installation of Freya, simply rename &lt;code&gt;~/Vorlagen&lt;/code&gt; to &lt;code&gt;~/Templates&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2467" LastActivityDate="2016-07-31T13:15:01.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7110" PostTypeId="1" CreationDate="2016-07-31T17:13:01.037" Score="1" ViewCount="401" Body="&lt;p&gt;I just installed elementary Freya 0.3.2 on a Dell Optiplex 755, hooked up to a Overscan on 42&quot; NEC monitor (TV). My DVI graphics card is an ATI Radeon 102-A771B.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is overscan. I tried installing AMD catalyst, but fouled up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed fglrx (ATI binaryX.org driver) but it wasn't useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway I had to do a clean install, as I had a dead screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using Ubuntu help pages, I was about to reinstall fglrx, but decided to try and get advice here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can cut and paste to the terminal, but am much more a GUI guy. Any advice would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5714" LastActivityDate="2016-10-02T03:30:57.350" Title="Overscan on 42&quot; NEC" Tags="|release-freya|system-installation|graphic-drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7111" PostTypeId="1" CreationDate="2016-07-31T18:52:53.617" Score="1" ViewCount="70" Body="&lt;p&gt;Cassidy James Blaede mentioned in a &lt;a href=&quot;https://plus.google.com/+CassidyJames/posts/54pqPYgdjoZ&quot; rel=&quot;nofollow noreferrer&quot;&gt;Google+ post&lt;/a&gt; that he wanted to redesign the &lt;a href=&quot;https://play.google.com/store/apps/details?id=com.echo.elementaryoswallpaper&quot; rel=&quot;nofollow noreferrer&quot;&gt;current elementary Wallpapers app&lt;/a&gt; with Material Design and Freya wallpapers:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Now we need to get this sucker updated with Freya wallpapers... and update it to the latest Android design guidelines. It's pretty old. xD﻿&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So I took on the task as an exercise, and created such application from scratch:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Pb7CM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Pb7CM.jpg&quot; alt=&quot;Elementary Wallpapers&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I'm pretty happy with the results, since the new application even uses less RAM memory than the old one, and uses asynchronous image loading etc.&#xA;In fact, I'm so happy with it that I want it to become the new official app. However, I'm unsure on how (and where) to report this, since this is not really a bug, nor a feature-request. How can I get this out in the open?&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-07-31T18:52:53.617" Title="I've created a Material Design elementary Wallpapers app. Where can I submit it?" Tags="|wallpaper|android|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7112" PostTypeId="1" CreationDate="2016-07-31T21:39:39.153" Score="3" ViewCount="196" Body="&lt;p&gt;I have a freya 0.3.2 / Win 10 dual boot system with an encrypted home folder on a separate partition. Recently I changed my user password in the system settings. As a result, I could not log into the system anymore. When I entered the password in the pantheon greeter prompt, the screen would go black for a split second (including some output that was impossible to read so quickly) and then returned to the pantheon greeter prompt. I then had to do a reinstall of the system to be able to log in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two questions I have:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Is this a bug or a deliberate design choice to protect the home folder encryption? To me it looks like a bug because when you change your password in the system settings you effectively lock yourself out of the system. I think there should at least be a prompt or some info in the system settings that lets you know that you're not able to change your home folder encryption password in the system settings&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;How can you change the password for home folder encryption? Is that possible at all? You certainly cannot do it by reinstalling - I've tried that too, if you pick another password in the install routine, the system will just hang after Pantheon greeter and not load the desktop environment. Upon reinstall choosing the old password it'll work again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-07-31T21:48:02.357" LastActivityDate="2016-09-19T14:31:12.397" Title="No password change with encrypted home folder" Tags="|release-freya|settings|security|encryption|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-20T16:32:07.913" ContentLicense="CC BY-SA 3.0" />
  <row Id="7114" PostTypeId="2" ParentId="4422" CreationDate="2016-08-01T04:27:46.163" Score="2" Body="&lt;p&gt;Did you try;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep activate-window-menu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There should be an entry for &lt;em&gt;activate-window-menu&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remove shortcut;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings activate-window-menu []&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restore defaults;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.wm.keybindings activate-window-menu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5700" LastActivityDate="2016-08-01T04:27:46.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7115" PostTypeId="2" ParentId="7027" CreationDate="2016-08-01T17:51:19.530" Score="-1" Body="&lt;p&gt;Maybe it is just deactivated. I've experienced random changes in the settings too, even though not with the clock. You might want to try to change the settings with dconf-editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open dconf-editor and open the path com - canonical - indicator - datetime. There you'll find an option &quot;show-clock&quot; (and plenty more settings...), just tick it and it should work&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-08-01T17:51:19.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7117" PostTypeId="1" AcceptedAnswerId="7133" CreationDate="2016-08-01T18:56:01.360" Score="1" ViewCount="1032" Body="&lt;p&gt;I was wondering, how an app which uses Qt for its GUI can be adapted to the Elementary Look &amp;amp; Feel. I know that elementary-specific apps are typically written in Vala, where, according to the docs, Gtk+ is used for user interfaces. So since Qt is able to delegate its renderings to Gtk+, at least as far as I know, is there any &quot;best practice&quot; on how to immitate the Elementry Look &amp;amp; Feel when one is bound to Qt and e.g. C++?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For example,&lt;/strong&gt; elementary app windows lack classic title bars, whereas &lt;code&gt;QMainWindow&lt;/code&gt; and &lt;code&gt;QDialog&lt;/code&gt; all come along with such. &lt;strong&gt;We can get rid of them using &lt;code&gt;Qt::FramelessWindowHint&lt;/code&gt; though, but how do keep the window borders?&lt;/strong&gt; And is there any convenient approach to achieving these elementary-typical toolbars?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or maybe, is the adaption of the elementary Look &amp;amp; Feel only possible when using Vala and Gtk+, but if so, then why?&lt;/p&gt;&#xA;" OwnerUserId="2467" LastEditorUserId="2467" LastEditDate="2016-08-01T20:44:36.350" LastActivityDate="2016-08-02T18:41:32.727" Title="How to adapt the Elementary Look &amp; Feel in Qt-written apps?" Tags="|development|qt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7119" PostTypeId="1" CreationDate="2016-08-01T20:40:01.860" Score="0" ViewCount="27" Body="&lt;p&gt;exite any way to know in &quot; pantheon Files&quot; occupation of records, something like &quot; My Computer&quot; windows , currently use the df from the terminal , but I wonder if there from the graphical environment otherwise.&#xA;Regards, and thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="5691" LastActivityDate="2016-10-02T11:47:02.060" Title="namely the occupation of the disks from &quot; pantheon files&quot; or from the desktop" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7120" PostTypeId="1" CreationDate="2016-08-02T09:55:12.923" Score="1" ViewCount="183" Body="&lt;p&gt;I can access localhost:631 but I can click or open the link inside the page like &lt;a href=&quot;http://localhost:631/printers&quot; rel=&quot;nofollow&quot;&gt;http://localhost:631/printers&lt;/a&gt; and many more. &lt;/p&gt;&#xA;" OwnerUserId="5681" LastActivityDate="2016-08-02T09:55:12.923" Title="CUPS Trouble, can not access http://localhost:631/printers" Tags="|applications|settings|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7121" PostTypeId="2" ParentId="797" CreationDate="2016-08-02T10:28:41.080" Score="0" Body="&lt;p&gt;I would suggest that you use emacs-nox (Version that runs in the terminal window).&#xA;There is AskUbuntu link that tells you how to download it:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/23645/how-do-i-download-the-command-line-emacs-instead-of-the-gui-one#23647&quot;&gt;https://askubuntu.com/questions/23645/how-do-i-download-the-command-line-emacs-instead-of-the-gui-one#23647&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This version works just fine and is much better IMO since you are most likely using the terminal to do stuff anyway.&lt;/p&gt;&#xA;" OwnerUserId="5721" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-08-02T10:28:41.080" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7122" PostTypeId="1" CreationDate="2016-08-02T12:14:58.650" Score="1" ViewCount="39" Body="&lt;p&gt;I am &quot;old fart&quot; and my vision is not too good. I am using Linux Mint 17.3 KDE, where the clone display works. I installed this oS and the &quot;clone&quot; do not work.&#xA;My laptop is Lenovo G51. Any way to fix this?. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5723" LastActivityDate="2016-08-02T12:14:58.650" Title="clone display laptop/tv" Tags="|display|" AnswerCount="0" CommentCount="2" ClosedDate="2017-02-19T20:40:46.703" ContentLicense="CC BY-SA 3.0" />
  <row Id="7123" PostTypeId="2" ParentId="7080" CreationDate="2016-08-02T14:58:02.697" Score="2" Body="&lt;p&gt;You can download uck from the repositories, it's a nice tool to customize iso's.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install uck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you can do it manually. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used this tutorial once, a bit long but it is great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://nathanpfry.com/how-to-customize-an-ubuntu-installation-disc/&quot; rel=&quot;nofollow&quot;&gt;https://nathanpfry.com/how-to-customize-an-ubuntu-installation-disc/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-02T14:58:02.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7125" PostTypeId="2" ParentId="7042" CreationDate="2016-08-02T15:05:21.030" Score="0" Body="&lt;p&gt;The best way to install wine is using PlayOnLinux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.playonlinux.com/en/&quot; rel=&quot;nofollow&quot;&gt;https://www.playonlinux.com/en/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's easy and you can choose which version of wine you want to run.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-02T15:05:21.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7126" PostTypeId="1" CreationDate="2016-08-02T15:49:17.083" Score="0" ViewCount="52" Body="&lt;p&gt;The amd64 iso image does not seem to work on my HP Pavillion 64 with a Intel Dual Core 2.17 GHz CPU. This message is displayed: &quot;The system is not compatible with the CPU&quot; (translated)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Buenas tardes, escribo para informar que la ISO amd64 no funciona en mi laptop HP Pavilion 64 con CPU Intel Dual Core 2.17GHz. El mensaje que arroja es: &quot;Sistema no compatible con el CPU&quot;.&lt;/p&gt;&#xA;" OwnerUserId="5727" LastEditorUserId="68" LastEditDate="2016-10-01T20:43:03.287" LastActivityDate="2016-10-01T20:48:28.610" Title="The amd64 iso does not work on my laptop. (La ISO amd64 no funciona en mi laptop.)" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7127" PostTypeId="2" ParentId="7040" CreationDate="2016-08-02T16:19:18.790" Score="1" Body="&lt;p&gt;There is currently no such option or plugin. You should probably file an issue report against Scratch. See this other StackExchange post: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;How can I report an issue with elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-08-02T16:19:18.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7128" PostTypeId="1" CreationDate="2016-08-02T16:20:40.880" Score="1" ViewCount="68" Body="&lt;p&gt;Yesterday when I was using Maya for the first time, it would immediately start and allow me to add remote calendars to it. I even was able to add an event to a remote CalDAV calendar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At some point there must have been a problem so that the application won't start anymore. When I try to start Maya now, I get the below output on the terminal and then the application gets stuck:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ maya-calendar&#xA;&#xA;** (maya-calendar:3902): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-KGJ9tku41s: Connection refused&#xA;[_LOG_LEVEL_INFO 18:14:09.083533] Application.vala:155: Calendar version: 0.3.1.1&#xA;[_LOG_LEVEL_INFO 18:14:09.083680] Application.vala:157: Kernel version: 4.2.0-42-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5728" LastActivityDate="2016-08-02T16:20:40.880" Title="Maya calendar won't start" Tags="|calendar|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-09T00:22:17.837" ContentLicense="CC BY-SA 3.0" />
  <row Id="7129" PostTypeId="1" CreationDate="2016-08-02T17:19:59.413" Score="0" ViewCount="1980" Body="&lt;p&gt;I use elementary freya. 3.16.0-77-generic 14.04.1 ubuntu.  when I installed my laptop, i used the coded home folder. so now I have the following problem;&#xA;I can't login in the GUI. My laptop was running perfect with freya. Today I wanted to choose a new password for my account by using the system settings úsers'icon for it. that seemd to work. after i rebooted my machine for another reason, I was stucked! I wanted to do the Xauthority procedure.....but I have no normal home folder. My home folder has no .Xauthority file, only codes in every subfolder I look.  When I choose ctrl- alt- F2, I see the console mode.  And I can login with my new password. So the password is correct...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me? only choose a new password to get this trouble. I feel very sorry now i have chosen a coded home partition during installation. I can't solve it if there is a Xauthority problem since that is coded to. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;console login works with the new password. (text modus)&lt;/li&gt;&#xA;&lt;li&gt;at the welcome screen not. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Help.&lt;/p&gt;&#xA;" OwnerUserId="5731" LastActivityDate="2016-10-02T12:48:46.627" Title="can't login in the login screen" Tags="|release-freya|greeter|folder|home|" AnswerCount="1" CommentCount="3" FavoriteCount="0" ClosedDate="2016-10-12T02:06:33.497" ContentLicense="CC BY-SA 3.0" />
  <row Id="7131" PostTypeId="2" ParentId="3945" CreationDate="2016-08-02T17:41:33.127" Score="1" Body="&lt;p&gt;After editing &lt;code&gt;elementary.grub&lt;/code&gt; you need to run &lt;code&gt;update-grub&lt;/code&gt; to regenerate &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt; with the new theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically, it runs the script &lt;code&gt;/etc/grub.d/05_debian_theme&lt;/code&gt; and picks up the default plymouth theme defined in &lt;code&gt;/lib/plymouth/themes/default.grub&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;elementary.grub&lt;/code&gt; is not already your default theme, select it with &lt;code&gt;sudo update-alternatives --config default.plymouth&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5732" LastActivityDate="2016-08-02T17:41:33.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7132" PostTypeId="2" ParentId="7126" CreationDate="2016-08-02T18:28:22.863" Score="2" Body="&lt;p&gt;Please edit your question adding the exact CPU model and the exact laptop model. And, if possible, use English. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First check that the hash of your downloaded ISO matches the one supplied by the elementary team (you can find the correct hash for Loki in the &lt;a href=&quot;https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary documentation&lt;/a&gt; and for older versions in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8270/68&quot;&gt;this answer&lt;/a&gt;). If it does not match you should download the ISO file again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the hashes match you could download the 32bit version of elementary OS 0.3 Freya and see if you can install it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this work the problem is likely your CPU architecture and you should stay with the 32 bit version. Note that you won't be able to use Loki as the 32 bit no longer exists.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-01T20:48:28.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7133" PostTypeId="2" ParentId="7117" CreationDate="2016-08-02T18:41:32.727" Score="2" Body="&lt;p&gt;AFAIK the L&amp;amp;F would probably be achieved delegating the rendering to GTK from the Qt app. The problem is that all of the eOS APIs, IIRC, are written in Vala therefore you won't be able to interact with them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only care about the theming of the app to be the same as the OS  &lt;a href=&quot;https://wiki.archlinux.org/index.php/Uniform_look_for_Qt_and_GTK_applications&quot; rel=&quot;nofollow&quot;&gt;make the Qt use the current gtk theme&lt;/a&gt; but if you care about the os APIs there isn't other way than writting Vala (and using GTK)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: with APIs I also mean the GTK widgets made by the eOS team specifically for the distro.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-08-02T18:41:32.727" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7135" PostTypeId="1" CreationDate="2016-08-02T22:04:45.793" Score="1" ViewCount="41" Body="&lt;p&gt;I have a Windows 10 computer, I've created a 100 GB partition to install Elementary OS, I've used Rufus to create a bootable USB device. The installing process is perfect, I have no problem, it runs with full resolution. But then, when it's finished and I try to start the system I get this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bzKpH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bzKpH.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've had the same problem with Ubuntu, but that time I didn't really want to fix it, so I've simply uninstalled it. But this time I want the system running. Can you help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've discovered that if I use GRUB to start elementary's recovery mode, and I continue normal boot from that, I haven't this problem but the screen resolution is fixed to 480x260 (4:3) and I can't change it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your time, hope you have a solution to my problem.&lt;/p&gt;&#xA;" OwnerUserId="5735" LastActivityDate="2016-08-02T22:04:45.793" Title="Can't start the OS because of video problems" Tags="|system-installation|display|startup|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7136" PostTypeId="1" AcceptedAnswerId="7137" CreationDate="2016-08-02T23:29:49.393" Score="0" ViewCount="465" Body="&lt;p&gt;I've been grappling with installing some Ubuntu packages with &lt;code&gt;apt-get&lt;/code&gt; so I thought I'd post an example for anyone else struggling with Elementary OS. Here &lt;code&gt;libssl&lt;/code&gt; or &lt;code&gt;openssl&lt;/code&gt; won't install and these are dependencies I need for R packages. I suspect this is because I have added Ubuntu PPA's and updated already.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that reinstalling with &lt;code&gt;apt-get remove&lt;/code&gt; or &lt;code&gt;apt-get install -f&lt;/code&gt; does not resolve this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Po8Y7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Po8Y7.png&quot; alt=&quot;ssl_question&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5205" LastActivityDate="2016-10-02T00:23:24.900" Title="Install packages on elementary OS with downgrade" Tags="|release-freya|software-installation|apt|aptitude|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7137" PostTypeId="2" ParentId="7136" CreationDate="2016-08-02T23:29:49.393" Score="1" Body="&lt;p&gt;This can be resolved by installing aptitude with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install aptitude&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then running&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo aptitude install libssl-dev&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and selecting the options as follows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JotG9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JotG9.png&quot; alt=&quot;ssl_answer&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5205" LastActivityDate="2016-08-02T23:29:49.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7138" PostTypeId="2" ParentId="7110" CreationDate="2016-08-03T01:58:19.580" Score="1" Body="&lt;p&gt;OK, for this particular monitor you need to get your remote or use the bottom buttons on the monitor. Press 'menu'. Scroll to 'OPTION 1' then 'RGB SELECT', then select 'DTV'. Exit out and turn your attention to your GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, you need to get into the 'system settings' menu, then the 'display' option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The blue box in the center of the page should say &quot;NEC Corporation 42&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the upper right hand corner of the blue mini-screen, on the gear icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 options are there Resolution and rotation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the drop down menu of resolution and click 1360 X 768 (16:9)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately the 'apply' button will not be visible on your screen. 1st click outside of the 'resolution' box. Hit 'tab' 5 or 6 times, then hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll know you got it if the screen goes wonky for a moment and then you see the whole 'displays' gui. A dialogue box will start counting down as you need to choose 'keep the new resolution' (or somesuch statement. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The full beauty of elementary should now be ay your command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I'm sure something similar will work for other overscan problems with HD and emulated HD TVs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck&lt;/p&gt;&#xA;" OwnerUserId="5714" LastActivityDate="2016-08-03T01:58:19.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7143" PostTypeId="2" ParentId="7119" CreationDate="2016-08-03T11:07:13.370" Score="1" Body="&lt;p&gt;In Loki, you can right click on the devices in the sidebar of Files and choose &quot;Properties&quot; to get information about device size and usage.  This causes the device to be mounted though and only gives the information for one device at a time, so it is not exactly equivalent to df.  Is this what you were asking?&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-08-03T11:07:13.370" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7145" PostTypeId="2" ParentId="7129" CreationDate="2016-08-03T11:59:44.623" Score="0" Body="&lt;p&gt;0&#xA;down vote&lt;/p&gt;&#xA;&#xA;&lt;p&gt;solved:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;added new user by using Ctrl+alt+F1 terminal. (#sudo adduser tester), enter all questions. After (Ctrl+Alt+F6) to go back to GUI. login with the new account, it logs in. Go to system settings user and click on the user account settings. click on your own account (original account) en enter the new password. Change after that my own account's password to the old password of this account I used before I had the problem. logged out of the test account.The login sacreen appears. logged in with my own account with old password. Voila!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dear elementary os developer, can this be a bug? I only chose a different password in the gui to have this problem. It seems after changing the password by using elementary os gui, i changes the unix password in terminal but somthing goes wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This kind of situation is very bad for any user with a encrypted home folder.&lt;/p&gt;&#xA;" OwnerUserId="5741" LastActivityDate="2016-08-03T11:59:44.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7146" PostTypeId="2" ParentId="7105" CreationDate="2016-08-03T13:38:10.193" Score="5" Body="&lt;p&gt;Installing this &quot;upgrade&quot; will not update your system to Loki. It will set up elementary OS 0.3.x with the Ubuntu 16.04 base, which will probably not work properly. When Loki is released, you can upgrade by downloading the ISO from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/&lt;/a&gt; and doing a fresh install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3107/792&quot;&gt;this answer about a similar 15.04 upgrade dialog&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;No, do not upgrade to the 15.04 base. Freya is built upon 14.04 LTS and only that. elementary OS' repositories do not even contain packages for 15.04 (or 15.10, for that matter). You will end up with a broken installation.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This dialog definitely is confusing, and hopefully future versions of elementary OS will get rid of it.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-08-03T13:38:10.193" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7147" PostTypeId="1" CreationDate="2016-08-03T13:55:12.433" Score="1" ViewCount="83" Body="&lt;p&gt;Yesterday when updating my OS, the Update manager freezed and wasn't responding. I waited but finally force the exit and shut it down. Now it shows up a message saying something like: &quot;Updates cannot be installed. Proceed with a parcial update or write sudo apt-get install -f in terminal&quot;. I try both but it ain't working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, today trying to install software from the Software Center, it also freezes and crashes. What can I do to bring everything back up again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks! :)&lt;/p&gt;&#xA;" OwnerUserId="5743" LastActivityDate="2016-08-03T13:55:12.433" Title="Update Manager doesn't work + Sotware Center crashes" Tags="|software-installation|appcenter|" AnswerCount="0" CommentCount="0" ClosedDate="2019-04-17T18:22:08.260" ContentLicense="CC BY-SA 3.0" />
  <row Id="7148" PostTypeId="2" ParentId="6749" CreationDate="2016-08-03T14:15:55.717" Score="2" Body="&lt;p&gt;This is a known bug in Ubuntu 14.04, which is the provider of all the base packages. Some people claim that you can install xfce desktop, and change your ~/.xsession file to use it instead, but I have had no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the bug: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/1251281&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/gnome-session/+bug/1251281&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5744" LastActivityDate="2016-08-03T14:15:55.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7149" PostTypeId="1" AcceptedAnswerId="7152" CreationDate="2016-08-03T15:11:38.287" Score="1" ViewCount="1373" Body="&lt;p&gt;I just installed the latest elementary OS and am missing Wi-Fi drivers. My chip is a &lt;em&gt;&lt;b&gt;Ralink RT3290&lt;/b&gt;&lt;/em&gt;. I've tried practically every guide which apparently 'solves' this issue, but none have worked thus far.&#xA;I get errors while doing the 'sudo make' step in the solution mentioned &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2104690&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; and nothing seems to be able to fix that. Hoping someone here has a solution.&lt;/p&gt;&#xA;" OwnerUserId="5745" LastEditorUserId="5565" LastEditDate="2016-10-09T06:23:59.557" LastActivityDate="2016-10-09T06:23:59.557" Title="Ralink RT3290 Wi-Fi drivers missing after install" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7150" PostTypeId="2" ParentId="1672" CreationDate="2016-08-03T15:40:17.157" Score="1" Body="&lt;p&gt;You need to install Isight, follow this tutorial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://turanct.wordpress.com/2010/06/11/use-your-macs-isight-on-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;https://turanct.wordpress.com/2010/06/11/use-your-macs-isight-on-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-03T15:40:17.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7151" PostTypeId="2" ParentId="6713" CreationDate="2016-08-03T15:44:39.777" Score="2" Body="&lt;p&gt;You might be missing the b43 firmware drivers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and check your Wireless card model&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lshw -C network&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For models:&#xA; * BCM4306/3;&#xA; * BCM4311;&#xA; * BCM4318;&#xA; * BCM4321;&#xA; * BCM4322 (only 14e4:432b);&#xA; * BCM4312 (with Low-Power a.k.a. LP-PHY).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install with &lt;code&gt;sudo apt install firmware-b43-installer&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For models:&#xA; * BCM4301;&#xA; * BCM4306/2;&#xA; * BCM4306.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install with &lt;code&gt;sudo apt install firmware-b43legacy-installer&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="26" LastEditDate="2016-08-16T00:22:59.487" LastActivityDate="2016-08-16T00:22:59.487" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7152" PostTypeId="2" ParentId="7149" CreationDate="2016-08-03T15:52:54.450" Score="0" Body="&lt;p&gt;This guy seems to have the solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the file&#xA;&lt;a href=&quot;http://onthim.blogspot.ca/2015/06/install-ralink-rt3290-wi-fi-driver-on.html&quot; rel=&quot;nofollow&quot;&gt;http://onthim.blogspot.ca/2015/06/install-ralink-rt3290-wi-fi-driver-on.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and follow the instructions in ReadMe inside the RT3290 folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it works for you.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-03T15:52:54.450" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7153" PostTypeId="2" ParentId="7042" CreationDate="2016-08-03T16:50:38.200" Score="0" Body="&lt;p&gt;For now I have intalled virtual box to work with Sony Vegas in Windows.&#xA;I understand that it is even safer this way than installing Wine.&#xA;I dont know if I stay satisfied when i have to reactivated windows in virtual box again and again.&lt;/p&gt;&#xA;" OwnerUserId="5635" LastActivityDate="2016-08-03T16:50:38.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7154" PostTypeId="2" ParentId="1613" CreationDate="2016-08-03T19:04:15.143" Score="0" Body="&lt;p&gt;Had same problem, I solve this issue doing :  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download files thunderbird-attach and thunderbird-attach.contract from &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/contractor/thunderbird-contracts/files&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Move file :    &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;mv thunderbird-attach /usr/bin/ &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;mv thunderbird-attach.contract /usr/share/contractor/  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Make thunderbird-attach executable :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;chmod +x /usr/bin/thunderbird-attach&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Adapt last line thunderbird-attach.contract to : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;#Gettext-Domain=file-roller&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Delete Geary Contract file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Done ! &lt;/p&gt;&#xA;" OwnerUserId="5571" LastActivityDate="2016-08-03T19:04:15.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7155" PostTypeId="1" CreationDate="2016-08-03T21:00:23.793" Score="2" ViewCount="1118" Body="&lt;p&gt;&lt;strong&gt;Nevermind! I would still like to know why it doesn't worked with the built-in client. But I just found out that the ShrewSoft VPN client is available through the Software Center. Ok, I start to love linux! :-)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the newest elementare OS (updated few minutes ago). I'm using a VPN connection to my office through the &lt;em&gt;ShrewSoft VPN&lt;/em&gt; program in Windows and everything works fine. Since I don't want upgrade my Windows 7 to Windows 10, I'm now switching to Linux and I need a VPN connection there too. But I can't get it to work with the built-in VPN client. elementary OS starts to connect and after a few seconds just shows a popup with message &quot;The VPN connection '...' failed&quot;. What might be the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The log in file /var/log/syslog says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; Starting VPN service 'pptp'...&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 8424&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN service 'pptp' appeared; activating connections&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN plugin state changed: starting (3)&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded.&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN connection 'XXXXX' (Connect) reply received.&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: pppd 2.4.5 started by root, uid 0&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Using interface ppp0&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Connect: ppp0 &amp;lt;--&amp;gt; /dev/pts/2&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]:    SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0)&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]:    SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found.&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;warn&amp;gt; /sys/devices/virtual/net/ppp0: couldn't determine device driver; ignoring...&#xA;Aug  3 22:26:35 vmelementary pptp[8432]: nm-pptp-service-8424 log[main:pptp.c:314]: The synchronous pptp option is NOT activated&#xA;Aug  3 22:26:35 vmelementary pptp[8436]: nm-pptp-service-8424 warn[open_inetsock:pptp_callmgr.c:329]: connect: No route to host&#xA;Aug  3 22:26:35 vmelementary pptp[8436]: nm-pptp-service-8424 fatal[callmgr_main:pptp_callmgr.c:127]: Could not open control connection to XXX.XXX.XXX.XXX&#xA;Aug  3 22:26:35 vmelementary pptp[8432]: nm-pptp-service-8424 fatal[open_callmgr:pptp.c:487]: Call manager exited with error 256&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Modem hangup&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Connection terminated.&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0)&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;warn&amp;gt; VPN plugin failed: 1&#xA;Aug  3 22:26:35 vmelementary pppd[8428]: Exit.&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;warn&amp;gt; VPN plugin failed: 1&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN plugin state changed: stopped (6)&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN plugin state change reason: 0&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS.&#xA;Aug  3 22:26:35 vmelementary NetworkManager[773]: &amp;lt;warn&amp;gt; error disconnecting VPN: Could not process the request because no VPN connection was active.&#xA;Aug  3 22:26:39 vmelementary dbus[498]: [system] Activating service name='org.freedesktop.hostname1' (using servicehelper)&#xA;Aug  3 22:26:39 vmelementary dbus[498]: [system] Successfully activated service 'org.freedesktop.hostname1'&#xA;Aug  3 22:26:39 vmelementary kernel: [11391.182668] systemd-hostnamed[8456]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!&#xA;Aug  3 22:26:41 vmelementary NetworkManager[773]: &amp;lt;info&amp;gt; VPN service 'pptp' disappeared&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(IP and VPN profile name obfuscated)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Settings&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Settings (VPN -&amp;gt; Advanced):&#xA;Authentication: [all checked]&#xA;[ ] Use Point-to-Point encryption (MPPE)&#xA;[x] Allow BSD data compression&#xA;[x] Allow Deflate data compression&#xA;[x] Use TCP header compression&#xA;[x] Send PPP echo packets&#xA;&#xA;Settings (IPv4 Settings)&#xA;Method: Automatic (VPN)&#xA;Addresses: [empty] (I can add addresses, since buttons disabled)&#xA;Additional DNS servers: [empty]&#xA;Additional search domains: [empty]&#xA;&#xA;Settings (IPv4 Settings -&amp;gt; Routes...)&#xA;Route #1: 192.168.99.0  255.255.255.0  192.168.99.1&#xA;[ ] Ignore automatically obtained routes&#xA;[ ] Use this connection only for resources on its network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5748" LastEditorUserId="5748" LastEditDate="2016-08-03T21:55:44.147" LastActivityDate="2016-08-03T21:55:44.147" Title="Built-in VPN connection failure" Tags="|networking|vpn|" AnswerCount="0" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7156" PostTypeId="2" ParentId="7106" CreationDate="2016-08-04T03:56:49.660" Score="0" Body="&lt;p&gt;All the libnl packages are here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://packages.ubuntu.com/search?suite=default&amp;amp;section=all&amp;amp;arch=any&amp;amp;keywords=libnl&amp;amp;searchon=names&quot; rel=&quot;nofollow&quot;&gt;http://packages.ubuntu.com/search?suite=default&amp;amp;section=all&amp;amp;arch=any&amp;amp;keywords=libnl&amp;amp;searchon=names&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're using eOS Freya, then that would be the Trusty version for Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which version do you already have and which ones do you need?&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-04T03:56:49.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7157" PostTypeId="2" ParentId="7106" CreationDate="2016-08-04T06:43:35.557" Score="1" Body="&lt;p&gt;You can try disabling &lt;strong&gt;Secure Boot&lt;/strong&gt; in the BIOS if you have such a setting. My Braodcom wireless won't work anymore after software updates and with secure boot enabled.&lt;/p&gt;&#xA;" OwnerUserId="5753" LastActivityDate="2016-08-04T06:43:35.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7158" PostTypeId="1" CreationDate="2016-08-04T06:46:00.643" Score="5" ViewCount="229" Body="&lt;p&gt;I'm following the developer getting started document, and have worked my way here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://elementary.io/docs/code/getting-started#launchpad-recipes&quot; rel=&quot;nofollow&quot;&gt;http://elementary.io/docs/code/getting-started#launchpad-recipes&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm able to build the hello-packaging application locally, but the build fails in launchpad when trying to build the deb package. The following error is under the &quot;dpkg-buildpackage&quot; section from the building log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;----------------------------------------------&#xA;-- Found PkgConfig: /usr/bin/pkg-config (found version &quot;0.26&quot;) &#xA;-- checking for module 'gtk+-3.0'&#xA;--   package 'gtk+-3.0' not found&#xA;CMake Error at /usr/share/cmake-2.8/Modules/FindPkgConfig.cmake:283 (message):&#xA;  A required package was not found&#xA;Call Stack (most recent call first):&#xA;  /usr/share/cmake-2.8/Modules/FindPkgConfig.cmake:337 (_pkg_check_modules_internal)&#xA;  CMakeLists.txt:25 (pkg_check_modules)&#xA;&#xA;&#xA;CMake Error at CMakeLists.txt:32 (find_package):&#xA;  By not providing &quot;FindVala.cmake&quot; in CMAKE_MODULE_PATH this project has&#xA;  asked CMake to find a package configuration file provided by &quot;Vala&quot;, but&#xA;  CMake did not find one.&#xA;&#xA;  Could not find a package configuration file provided by &quot;Vala&quot; with any of&#xA;  the following names:&#xA;&#xA;    ValaConfig.cmake&#xA;    vala-config.cmake&#xA;&#xA;  Add the installation prefix of &quot;Vala&quot; to CMAKE_PREFIX_PATH or set&#xA;  &quot;Vala_DIR&quot; to a directory containing one of the above files.  If &quot;Vala&quot;&#xA;  provides a separate development package or SDK, be sure it has been&#xA;  installed.&#xA;&#xA;&#xA;-- Configuring incomplete, errors occurred!&#xA;---------------------------------------------&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The directory listed in my CMAKE_MODULE_PATH does actually include &quot;FindVala.cmake&quot;. Should I still add the PREFIX_MODULE_PATH pointing to the same place, or how would I fix this?&lt;/p&gt;&#xA;" OwnerUserId="5754" LastEditorUserId="26" LastEditDate="2016-09-25T16:59:45.350" LastActivityDate="2017-11-04T19:49:57.727" Title="Can't build package from developer getting started doc" Tags="|release-freya|applications|elementary-website|development|vala|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7160" PostTypeId="1" CreationDate="2016-08-04T09:41:39.053" Score="11" ViewCount="8469" Body="&lt;p&gt;How I can &quot;disable/enable&quot; my laptop's touchpad on Elementary OS 0.4 Loki?&lt;/p&gt;&#xA;" OwnerUserId="5416" LastEditorDisplayName="user170" LastEditDate="2017-11-16T09:31:38.507" LastActivityDate="2017-11-16T09:31:38.507" Title="How can I &quot;disable/enable&quot; my laptop's touchpad on Elementary OS Loki?" Tags="|settings|touchpad|release-loki|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7161" PostTypeId="2" ParentId="7160" CreationDate="2016-08-04T10:44:16.360" Score="-1" Body="&lt;p&gt;This is how I do in my elementary os (0.3 Freya). Hope this will help, since 0.4 Freya is based on Ubuntu 16.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to all settings -&gt; Mouse &amp;amp; Touchpad -&gt; Touchpad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And turn off touchpad&lt;/p&gt;&#xA;" OwnerUserId="5682" LastEditorUserId="5682" LastEditDate="2016-08-04T10:51:57.617" LastActivityDate="2016-08-04T10:51:57.617" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7162" PostTypeId="1" CreationDate="2016-08-04T13:15:06.907" Score="2" ViewCount="2675" Body="&lt;p&gt;I am a total newbie to Linux as I've never used Linux before. But however I wanted to dual boot windows 10 with elementary is 0.3.2 Freya.&#xA;What I did was create a bootable USB with Rufus and when I booted up the installer, and went to try elementary is it shows the following message :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[0.029189] Ignoring BGRT: invalid status 0 (expected1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[1.180440] ACPI PCC probe failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[1.224485] mmc0: Unknown controller version (3). You may experience problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Along with this, it showed the &quot;e&quot; logo twice like in split screen and when it disappeared it froze until I had to force restart my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next when I tried to installed elementary os, it showed the same errors but this time it displayed the setup in split screen  as shown in the attached pic.&#xA;Now I don't know what the real problem is so pls help.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YIIGZ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YIIGZ.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;PS- Sry abt the bad pic quality.&lt;/p&gt;&#xA;" OwnerUserId="5758" LastActivityDate="2017-03-05T18:20:47.563" Title="Problem installing elementary os freya" Tags="|release-freya|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7163" PostTypeId="2" ParentId="7162" CreationDate="2016-08-04T14:29:20.430" Score="1" Body="&lt;p&gt;Try booting in '&lt;strong&gt;nomodeset&lt;/strong&gt;'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot the live cd and when you see this screen hit &lt;strong&gt;Tab&lt;/strong&gt; in your keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YHeRb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YHeRb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then press F6 and select &lt;strong&gt;nomodeset&lt;/strong&gt;, hit &lt;strong&gt;Enter&lt;/strong&gt; and then &lt;strong&gt;Esc&lt;/strong&gt;. Now try Installing eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UA9SH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UA9SH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-04T14:29:20.430" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7165" PostTypeId="1" CreationDate="2016-08-05T04:12:24.420" Score="3" ViewCount="6299" Body="&lt;p&gt;I've got a couple rsync scripts that I'm wanting to setup with my external drives, but I'm nervous that I'm going to blow something up if one of my drives isn't auto-mounted on startup. Earlier today, I was trying to do it manually, and I nearly blew up my perfectly setup Elementary by screwing with the fstab files, had to boot from the liveUSB, install gedit, and then navigate to go fix the fstab file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways, I wondered if there was an easier way, or if Elementary Loki might be integrating this into the System Preferences?  &lt;/p&gt;&#xA;" OwnerUserId="5768" LastEditorUserId="242" LastEditDate="2018-10-13T02:19:48.707" LastActivityDate="2018-10-13T02:19:48.707" Title="Automounting external drives in Elementary OS" Tags="|startup|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7166" PostTypeId="2" ParentId="6848" CreationDate="2016-08-05T04:16:31.553" Score="0" Body="&lt;p&gt;I wonder if they meant &quot;update&quot; instead of &quot;download&quot; since they already have Luna installed. If that's the case, here is the link for instructions on how to download and &lt;a href=&quot;https://www.quora.com/How-do-I-upgrade-from-Elementary-OS-Luna-to-Freya&quot; rel=&quot;nofollow&quot;&gt;upgrade to the latest version of Elementary.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5768" LastActivityDate="2016-08-05T04:16:31.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7167" PostTypeId="1" CreationDate="2016-08-05T09:31:13.710" Score="1" ViewCount="21" Body="&lt;p&gt;I can not find file-release through command line on os x el capitan Version 10.11.6. On my virtual machine in Ubuntu I can do &quot;ls /etc/*release&quot; and it shows me two files with all needed information. No idea how to find the file with release information on mac. Please give me a hint or a hint how to search it?&lt;/p&gt;&#xA;" OwnerUserId="5769" LastActivityDate="2016-08-05T09:31:13.710" Title="How to find &quot;file-release&quot; in os x el capitan 10.11.6?" Tags="|filesystem|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-02T14:30:30.650" ContentLicense="CC BY-SA 3.0" />
  <row Id="7168" PostTypeId="1" CreationDate="2016-08-05T16:13:00.293" Score="5" ViewCount="23011" Body="&lt;p&gt;I have ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] I bought few years ago.  I have to move my computer to apart of the house where Ethernet will not reach. &lt;/p&gt;&#xA;" OwnerUserId="5772" LastActivityDate="2021-01-05T16:51:55.030" Title="How to get WiFi drivers to work?" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7172" PostTypeId="2" ParentId="7168" CreationDate="2016-08-06T03:43:09.977" Score="3" Body="&lt;p&gt;Try installing &lt;strong&gt;bcmwl-kernel-source&lt;/strong&gt; first and see if that works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get install bcmwl-kernel-source&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot your machine and see if the wifi works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, someone in the ubuntuforums seems to have the solution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2264020&amp;amp;highlight=wna3100&quot; rel=&quot;nofollow&quot;&gt;https://ubuntuforums.org/showthread.php?t=2264020&amp;amp;highlight=wna3100&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that works.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-06T03:43:09.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7173" PostTypeId="1" CreationDate="2016-08-06T05:42:54.083" Score="1" ViewCount="207" Body="&lt;p&gt;I have removed chrome OS and the bios that comes with Chromebooks and replaced it with SeaBIOS with elementary OS installed. It works very well, but I can't seem to get the touchpad working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have spent a while looking at countless posts and forums trying to find solutions from people who had similar problems, and have tried various suggestions. All of this with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using the command &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cat /proc/bus/input/devices&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Used to at least show my touchpad (which, according to it, is a Cypress APA touchpad) but it appears I have done something in the process of trying solutions to cause this to stop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been using a Microsoft PS/2 mouse instead&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help/suggestions would be greatly appreciated&lt;/p&gt;&#xA;" OwnerUserId="5777" LastEditorUserId="5777" LastEditDate="2016-08-06T05:50:05.700" LastActivityDate="2016-08-06T05:50:05.700" Title="Touchpad not working on HP chromebook 14" Tags="|release-freya|hp|chromebook|touchpad|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7174" PostTypeId="1" AcceptedAnswerId="9774" CreationDate="2016-08-06T06:53:11.143" Score="2" ViewCount="2712" Body="&lt;p&gt;Can the AppCenter do it just like how Ubuntu Software does?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems like AppCenter lacks lots of apps.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-08-06T06:59:05.833" LastActivityDate="2017-07-11T21:34:32.357" Title="Can we install snap packages and other apps like firefox through AppCenter?" Tags="|release-loki|apps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7175" PostTypeId="1" CreationDate="2016-08-06T08:22:46.813" Score="1" ViewCount="90" Body="&lt;p&gt;I had issues taking screenshots till I stumbled upon someone suggesting alt+ctrl+f2 and then alt+ctrl+f7 to make it where you can take screenshots. Which worked for screenshots. I tried doing this for video with OBS when recording EVE Online.  I got the audio but black screen for video.&#xA;I cannot use the open source xorg.conf drivers currently because I cannot adjust resolution nor get my display to extend to my second monitor.  Its stuck in mirror at a resolution only good for my smaller screen 2nd monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been doing some reading and wonder if upgrading the kernel or moving to Loki would resolve the gpu driver issues I am having?&lt;/p&gt;&#xA;" OwnerUserId="5772" LastActivityDate="2016-08-06T08:22:46.813" Title="Recording with AMD proprietary drivers" Tags="|graphic-drivers|kernel|release-loki|amd|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7176" PostTypeId="2" ParentId="7165" CreationDate="2016-08-06T09:53:56.937" Score="2" Body="&lt;p&gt;Install gnome-disks using the command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The open it using &lt;code&gt;sudo gnome-disks&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select the partition you want to mount. Click the &lt;code&gt;gear-icon&lt;/code&gt; and the on &lt;code&gt;Edit mount options&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disable the automatic mount option and Check the box stating &lt;code&gt;Mount on Startup&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-08-06T09:53:56.937" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7177" PostTypeId="1" CreationDate="2016-08-06T10:12:10.947" Score="2" ViewCount="2032" Body="&lt;p&gt;a newbie here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed GNS3 on Freyo using command line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This to be specific:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gns3/ppa&#xA;sudo apt-get install gns3-gui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Everything went fine and installed successfully. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I tried to launch the program from Applications menu, the icon just was not there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can launch it from the terminal using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gns3 start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am not able to right click on the icon and select &quot;Keep in dock&quot; either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get the launcher icon in the applications menu?&lt;/p&gt;&#xA;" OwnerUserId="5778" LastEditorUserId="26" LastEditDate="2016-08-18T14:45:35.967" LastActivityDate="2016-12-21T14:15:13.257" Title="GNS3 icon do not appear in Applications" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7178" PostTypeId="1" CreationDate="2016-08-06T12:11:57.557" Score="1" ViewCount="774" Body="&lt;p&gt;I try to install Intel GPU Drivers using Intel Graphics Installer for Linux, but it only works for Ubuntu 15.04 and higher, but elementary is based on 14.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any other way to install these drivers?&#xA;I can't find out my GPU model, but it's integrated Intel.&lt;/p&gt;&#xA;" OwnerUserId="5780" LastActivityDate="2016-08-06T12:11:57.557" Title="How can I install GPU drivers using Intel graphics installer?" Tags="|graphic-drivers|graphics|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7183" PostTypeId="2" ParentId="6897" CreationDate="2016-08-07T06:03:10.230" Score="1" Body="&lt;p&gt;Solution:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow&quot;&gt;https://github.com/mank319/elementaryPlus&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit hipchat4.desktop file in both places&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;/usr/share/applications&lt;/li&gt;&#xA;&lt;li&gt;~/.local/share/applications&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Change Exec entry (should look like this):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exec=env XDG_CURRENT_DESKTOP=Unity /opt/HipChat4/bin/HipChat4&lt;/p&gt;&#xA;" OwnerUserId="5786" LastActivityDate="2016-08-07T06:03:10.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7184" PostTypeId="1" CreationDate="2016-08-07T07:49:31.143" Score="3" ViewCount="4360" Body="&lt;p&gt;I have R9 380 Tonga Chipset which is one of the GPUs AMD GPU Pro supports and since Loki is powered by 16.04 I thought it would work no problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was following the guide from the AMD website &#xA;&lt;a href=&quot;http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-PRO-Install.aspx&quot; rel=&quot;nofollow&quot;&gt;http://support.amd.com/en-us/kb-articles/Pages/AMDGPU-PRO-Install.aspx&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I got to the install part I got &quot;Unsupported OS&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am a new low tier PC consumer to Linux.  Do y'all know a way I can get this to work?  Maybe Cassidy James has some other paternal barrier that I haven't by passed yet?&lt;/p&gt;&#xA;" OwnerUserId="5772" LastActivityDate="2017-08-13T12:55:21.240" Title="AMD GPU Pro on Loki (Ubuntu 16.04)" Tags="|graphic-drivers|ubuntu|release-loki|amd|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7185" PostTypeId="2" ParentId="6969" CreationDate="2016-08-07T08:10:06.557" Score="-1" Body="&lt;p&gt;Question should be will Loki support AMD GPU Pro. It is supposedly better than fglrx.&lt;/p&gt;&#xA;" OwnerUserId="5772" LastEditorUserId="5772" LastEditDate="2016-08-07T09:12:49.337" LastActivityDate="2016-08-07T09:12:49.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7186" PostTypeId="2" ParentId="7162" CreationDate="2016-08-07T14:01:45.150" Score="0" Body="&lt;p&gt;Try creating the USB with a different program. I have had issues with Rufus in the past. This one always works for me: &lt;a href=&quot;http://www.linuxliveusb.com/&quot; rel=&quot;nofollow&quot;&gt;http://www.linuxliveusb.com/&lt;/a&gt; and I've used it to install elementary at least 10 times. (Not affiliated with that program in any way, just know it works).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There have also been issues with Freya and the Skylake processors. Search on here for &quot;Skylake&quot; for more on that!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!!! It really is an awesome OS and worth the effort to get it installed.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-07T14:01:45.150" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7187" PostTypeId="2" ParentId="7177" CreationDate="2016-08-07T14:14:56.737" Score="3" Body="&lt;p&gt;OK so here's what I would do (I'm also a fairly newb):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;open Scratch text editor and create a new file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Paste the following into that new file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Terminal=false&#xA;Type=Application&#xA;Name=GNS3&#xA;Comment=Description of program- whatever you want&#xA;Exec=gns3 start&#xA;Icon=/path/to/gns3icon&#xA;Categories=&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note for the &lt;code&gt;Icon=&lt;/code&gt; line: I usually will save the icon in &lt;code&gt;/home/your-user-name/.local/share/icons&lt;/code&gt; (After searching online for the icon usually, unless you already know where it is, then just copy it to the &lt;code&gt;.local/share/icons&lt;/code&gt; folder)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then save it as &lt;code&gt;gns3.desktop&lt;/code&gt; in &lt;code&gt;/home/your-user-name/.local/share/applications/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should now be in your Applications menu. Let me know if that works.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="423" LastEditDate="2016-08-07T14:20:11.607" LastActivityDate="2016-08-07T14:20:11.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7189" PostTypeId="1" CreationDate="2016-08-07T15:20:35.637" Score="3" ViewCount="4774" Body="&lt;p&gt;I can't find lots of Apps in AppCenter, such as Firefox, How to install them through the AppCenter?&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-09-10T18:30:23.447" Title="How to install Apps through AppCenter on Loki?" Tags="|release-loki|apps|appcenter|" AnswerCount="3" CommentCount="1" ClosedDate="2016-09-10T19:04:27.447" ContentLicense="CC BY-SA 3.0" />
  <row Id="7190" PostTypeId="2" ParentId="7189" CreationDate="2016-08-07T22:13:38.800" Score="0" Body="&lt;p&gt;Well ... assuming you know how to find the download (the deb package) for what you want to install ... you download it and them open it with AppCenter ... this will either install the application or add a PPA that them let's you install the application. &#xA;BTW PPA is Personal Package Archive ... basically it adds a link to where the package can be downloaded from.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-08-07T22:13:38.800" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7191" PostTypeId="2" ParentId="7189" CreationDate="2016-08-07T22:45:25.433" Score="1" Body="&lt;p&gt;The app center does not handle deb packages. This is what I did and it works for me.  I installed GDebi Package Installer(Cardboard box one) from the App Center. Which allowed me to install deb packages, but it removed my files manager so I went and installed another files manager called &quot;Files&quot; but in the description it will say its &quot;Nautilus, also known as Files, is the default file manager of the GNOME desktop.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got Chrome(for netflix), slack, discord, obs, Atom editor, Adobe Brackets, playsonlinux, Steam, and few more key apps installed that are not available thru the App Center.  There are apps on available thru the App Center that do not mesh well with the Loki.  Dolphin Files Manager, Ubuntu's Software Center, and etc.  Confuses me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: Found and Install Firefox thru the App Center no problem and ran it no problem too. &lt;/p&gt;&#xA;" OwnerUserId="5772" LastEditorUserId="5772" LastEditDate="2016-08-07T23:12:10.557" LastActivityDate="2016-08-07T23:12:10.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7192" PostTypeId="2" ParentId="4248" CreationDate="2016-08-08T02:54:46.337" Score="1" Body="&lt;p&gt;I have a Macbook 2006 and it only boots 32 bit version of any Ubuntu distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might need to boot in '&lt;strong&gt;nomodeset&lt;/strong&gt;' or '&lt;strong&gt;noapic&lt;/strong&gt;'. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow this instructions, it might work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/7163/5726&quot;&gt;https://elementaryos.stackexchange.com/a/7163/5726&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-08T02:54:46.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7193" PostTypeId="2" ParentId="2394" CreationDate="2016-08-08T05:10:17.473" Score="0" Body="&lt;p&gt;I don't know why but sadly &quot;Shift + &amp;lt;&quot; combination doesn't work, &quot;Shift + &gt;&quot; does though. Actually &quot;Ctrl + ,&quot; and &quot;Ctrl + .&quot; will fit perfectly for chosing previous and next track.&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="643" LastEditDate="2016-08-08T05:15:52.440" LastActivityDate="2016-08-08T05:15:52.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7194" PostTypeId="1" CreationDate="2016-08-08T05:11:36.813" Score="2" ViewCount="2021" Body="&lt;p&gt;I just bought a laptop with I7 6500u and integrated GPU. It won't run 3D game at all. I tried the Intel graphics installer for linux but it said I don't use i915 chipset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I update the driver properly?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is some information if needed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hai@hai-Lenovo-ideapad-300-14ISK:~$ lspci -nnk | grep -i VGA -A2&#xA;00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)&#xA;    Subsystem: Lenovo Device [17aa:3808]&#xA;    Kernel driver in use: i915_bpo&#xA;hai@hai-Lenovo-ideapad-300-14ISK:~$ lspci -nnk | grep -i VGA &#xA;00:02.0 VGA compatible controller [0300]: Intel Corporation Sky Lake Integrated Graphics [8086:1916] (rev 07)&#xA;hai@hai-Lenovo-ideapad-300-14ISK:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5789" LastEditorUserId="26" LastEditDate="2016-08-18T14:46:06.013" LastActivityDate="2023-12-13T10:04:30.550" Title="How do I install Intel HD graphics Skylake driver?" Tags="|graphic-drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7195" PostTypeId="1" CreationDate="2016-08-08T05:44:36.050" Score="1" ViewCount="253" Body="&lt;p&gt;I accidentally installed Private Internet Access application by clicking and opening the zipped file from their website. It is listed in my applications but I cannot delete it using terminal because I cannot find it listed. I have since installed my VPN the correct way but the earlier, wrong install that I did still causes a message to pop up in the right hand top corner saying it is connecting/disconnecting.Any way I can stop this?&lt;/p&gt;&#xA;" OwnerUserId="5790" LastActivityDate="2016-08-09T07:38:39.430" Title="Deleting PIA application" Tags="|openvpn|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7196" PostTypeId="1" CreationDate="2016-08-08T06:45:00.053" Score="2" ViewCount="521" Body="&lt;p&gt;I tried all day and several options later I still can't figure it out. Can I even install it on the flash drive? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is probably a noob question but I appreciate the help. I want a workspace clear of my windows or ubuntu installs, that I can take on the go and focus on work with. Considered Kali but I fell in love with Elementary.&lt;/p&gt;&#xA;" OwnerUserId="5792" LastActivityDate="2016-09-08T22:27:43.913" Title="Is there any way to use elementary os loki as a live usb with persistence?" Tags="|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7197" PostTypeId="2" ParentId="7194" CreationDate="2016-08-08T09:08:20.237" Score="0" Body="&lt;p&gt;I am told that Skylake is supported in kernel versions 4.3 and upwards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you upgraded the kernel ?&lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-08-08T09:08:20.237" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7198" PostTypeId="2" ParentId="7195" CreationDate="2016-08-08T09:16:10.223" Score="0" Body="&lt;p&gt;I depends on how it was installed. &#xA;If it was a browser extension then you can uninstall it from your browser settings. &#xA;If it installed through the &quot;software center&quot; then run the software center and click &quot;Installed&quot;. The down pointing arrow next to installed will show the sources to make it easier to find. Once you have found the package you can uninstall it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also check for unwanted VPN connections by running 'system settings' and clicking 'network'. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastEditorUserId="5545" LastEditDate="2016-08-09T07:38:39.430" LastActivityDate="2016-08-09T07:38:39.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7199" PostTypeId="1" CreationDate="2016-08-08T09:47:50.530" Score="0" ViewCount="228" Body="&lt;p&gt;I'm using the Loki Beta (Installed from Beta 1 and only updated apps). Today I've installed a few new updates to elementary OS and elementary Apps, after these updates I opened Firefox and I've found multiple new addons installed that are not removable. Could someone explain, if this is normal, why did this happen, should I remove these addons, if so, how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(GreseMonkey, HTTPS-Everywhere, LightBeam, Reddit Enhancement Suite and ublock origin were installed by me)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/FYMfx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FYMfx.png&quot; alt=&quot;Addons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5793" LastActivityDate="2016-10-01T11:59:17.463" Title="Firefox addons after update [Loki Beta]" Tags="|release-loki|firefox|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-09T00:30:15.300" ContentLicense="CC BY-SA 3.0" />
  <row Id="7200" PostTypeId="1" CreationDate="2016-08-08T13:58:28.123" Score="2" ViewCount="152" Body="&lt;p&gt;After I installed elementary OS, I made some wonderful customization and my friend like it very much. How can I share my OS with my friends?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't wish to do it for every friend manually all over again. I am assuming there is a way to package my OS into a file or similar. Then I can share this file with my friends and they can import it into their laptop easily. How can I achieve this? Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yuhua&#xA;Best regards&lt;/p&gt;&#xA;" OwnerUserId="4806" LastEditorUserId="37" LastEditDate="2016-08-10T08:26:31.640" LastActivityDate="2016-09-10T18:02:56.633" Title="How to share my customized elementary OS with my friends" Tags="|release-freya|settings|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7201" PostTypeId="2" ParentId="7200" CreationDate="2016-08-08T16:24:49.033" Score="2" Body="&lt;p&gt;You could write a bash script containing all the commands that you used to get your OS the way you want it. You could then share that script with friends, and they could run that script on their copy of elementary to get your changes. (If you did things in the GUI, you may need to find command line equivalents of what you did.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd recommend testing this script in a virtual machine with a fresh copy of elementary OS before giving the script to your friends! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What you're looking to do is a little like building your own Linux distro. That's probably way overkill for what you want to do here, but if you're interested, &lt;a href=&quot;https://www.linuxvoice.com/build-your-own-linux-distro/&quot; rel=&quot;nofollow&quot;&gt;this article&lt;/a&gt; explains how to get started.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-08-08T16:24:49.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7202" PostTypeId="2" ParentId="7200" CreationDate="2016-08-08T17:08:55.697" Score="2" Body="&lt;p&gt;Ryan's solution is very good. UCK is a good tool, but from my experience it can be a bit buggy sometimes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's another tutorial on how to customize your own distro manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://nathanpfry.com/how-to-customize-an-ubuntu-installation-disc/&quot; rel=&quot;nofollow&quot;&gt;https://nathanpfry.com/how-to-customize-an-ubuntu-installation-disc/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-08T17:08:55.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7205" PostTypeId="2" ParentId="5547" CreationDate="2016-08-08T20:56:36.533" Score="2" Body="&lt;p&gt;There are some experimental tools, but nothing stable enough to build a production app with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any libraries specific to elementary OS can only be used with Vala. elementary OS is built on Gtk+, and there are &lt;a href=&quot;https://github.com/TomasLinhart/SwiftGtk&quot; rel=&quot;nofollow&quot;&gt;experimental Gtk+ bindings for Linux&lt;/a&gt;. According to the documentation, &quot;currently it implements only a small subset of Gtk+&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're looking for a way to build cross-platform apps that can run on elementary and other OSes, &lt;a href=&quot;http://electron.atom.io/&quot; rel=&quot;nofollow&quot;&gt;Electron&lt;/a&gt; seems to work well, and any language with Gtk+ bindings would probably be fine. But if you want to build a &quot;native&quot; elementary OS app, Vala is the way to go.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-08-08T20:56:36.533" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7206" PostTypeId="2" ParentId="7076" CreationDate="2016-08-08T21:46:24.453" Score="1" Body="&lt;p&gt;cd /home/username/.local/share/noise/ and delete the Database(*.db) in this folder. After this step you can import your mp3 files again. &lt;/p&gt;&#xA;" OwnerUserId="5796" LastEditorUserId="138" LastEditDate="2016-08-19T13:20:26.720" LastActivityDate="2016-08-19T13:20:26.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7208" PostTypeId="1" CreationDate="2016-08-09T01:32:08.193" Score="2" ViewCount="1064" Body="&lt;p&gt;all:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I currently have elementary OS 0.3.2 Freya (64-bit) on a Dell Latitude E6530 laptop (Intel i7-3520M/2.90GHz, 8 GB RAM, 500 GB HDD). I chose to encrypt the disk when I installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I am the only user on this machine, I realized afterward that full disk encryption was probably not the way to go and I would like to remove the encryption.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this even possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it isn't, do I have to back up everything and reinstall to get rid of it? If that's the case, I know what apps and documents I need to back up, but what about tweaks/customization? Are there common config files in certain locations that can be saved to put in place after a reinstall?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry; this isn't just one question, so please excuse my ignorance. I can split up the questions, if need be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5799" LastActivityDate="2016-09-10T22:40:57.063" Title="Is it possible to remove full disk encryption?" Tags="|system-installation|settings|encryption|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7209" PostTypeId="2" ParentId="7195" CreationDate="2016-08-09T03:15:04.707" Score="1" Body="&lt;p&gt;It was installed by clicking on the package itself and put my username and password into the GUI, as I thought it could be installed just like it can on my phone and mac. So I cant see it in installed apps in the software centre even though it is in my applications.&lt;/p&gt;&#xA;" OwnerUserId="5791" LastActivityDate="2016-08-09T03:15:04.707" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7211" PostTypeId="2" ParentId="7196" CreationDate="2016-08-09T22:09:32.430" Score="1" Body="&lt;p&gt;You can install elementary OS from an usb drive to another one, or from cd/dvd to usb. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must take care making partitions. I recommend you to make two partitions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;A &quot;root&quot; (/ ) partition to install the OS&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;A &quot;home&quot; (/home) partition to persistence.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Avoid a swap partition, in order to preserve usbdrive life.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Choose your usb drive to install Grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find more information in a post i wrote few months after:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bitseater.blogspot.com.es/2016/01/create-bootable-and-persistent-usb.html?m=1&quot; rel=&quot;nofollow&quot;&gt;bitseater's blog&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;N.A.: I'm so sorry but my post is in spanish. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-08-09T22:09:32.430" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7212" PostTypeId="1" CreationDate="2016-08-10T05:42:46.157" Score="2" ViewCount="2466" Body="&lt;p&gt;How do you install Eclipse Neon? Whenever I try to install Eclipse the install version is always 3.8 I don't know what to do. Please help me. XD&lt;/p&gt;&#xA;" OwnerUserId="5808" LastActivityDate="2017-05-21T15:36:08.913" Title="Installing Eclipse Neon" Tags="|eclipse|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7213" PostTypeId="2" ParentId="7212" CreationDate="2016-08-10T08:21:46.960" Score="1" Body="&lt;p&gt;Download it from&#xA;&lt;a href=&quot;http://www.eclipse.org/downloads/eclipse-packages/?osType=linux&amp;amp;release=undefined&quot; rel=&quot;nofollow&quot;&gt;http://www.eclipse.org/downloads/eclipse-packages/?osType=linux&amp;amp;release=undefined&lt;/a&gt;&#xA;extract it. Run it. &lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-08-10T08:21:46.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7215" PostTypeId="1" CreationDate="2016-08-10T18:32:54.427" Score="0" ViewCount="22" Body="&lt;p&gt;When I open multiple files using other linux operating systems if I go the the hot corner and it is set to multi tasking all the files are displayed with a name under or above each file. If I do the same in Elementary all the files are displayed but no name, does anybody know if there is a setting to add file names so that I can see which each file is in multi tasking view&gt;&lt;/p&gt;&#xA;" OwnerUserId="5817" LastActivityDate="2016-09-09T22:42:30.927" Title="No file names in multi tasking view" Tags="|hot-corners|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7216" PostTypeId="1" CreationDate="2016-08-10T18:51:05.340" Score="1" ViewCount="58" Body="&lt;p&gt;I'm getting a new computer that I'm planning on putting elementary on. I would like to export my Music (Noise) library to the new computer and keep it organized just as it is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the issue: I reorganized my music using Noise, and it took hours going through several backups, deleting duplicates, updating track names and tags, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked &quot;Keep Music folder organized&quot; and &quot;Copy tracks to Music folder.&quot; However, in Noise, it says my music is 11.2 GB, but the properties of the Music folder (~/Music) say it's 24.5 GB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That means there are duplicates still in the Music folder that have been removed from the library by me. I don't care about those files. I don't want to import them again and have to go back through and rework the library again on the new machine, I just want to export the library AS IS and import it into the new machine. Any thoughts on how best to do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!!!&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-10T18:51:05.340" Title="I want to export my music library from Noise" Tags="|system-installation|software-installation|music|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7218" PostTypeId="2" ParentId="7215" CreationDate="2016-08-10T22:02:15.983" Score="1" Body="&lt;p&gt;As far as I know, there isn't currently a way to add titles to multitasking view.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like, you can file a feature request on &lt;a href=&quot;https://launchpad.net/gala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gala&lt;/a&gt;, the elementary OS window manager. For more on filing bugs and feature requests, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-with-elementary-os-to-the-developers&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-10T22:02:15.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7219" PostTypeId="1" CreationDate="2016-08-11T00:21:55.570" Score="2" ViewCount="7006" Body="&lt;p&gt;As a semi-new Linux user concerned about computer security. I have read Internet articles on Linux anti-virus (AV) applications. Most posts are outdated. There is a dearth of anyone reviewing Linux AV apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any recommendations on good AV for Linux, or even more specific, for elementary? I'm concerned with how secure and robust the apps are, as well as how it is with system resources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;em&gt;Please note that this question is *not* intended for folks to opine on why AV isn't needed on Linux, etc.&lt;/em&gt;)&lt;/p&gt;&#xA;" OwnerUserId="5799" LastEditorDisplayName="user466" LastEditDate="2016-08-12T16:53:09.720" LastActivityDate="2016-09-11T02:26:45.727" Title="Recommended antivirus applications for Linux" Tags="|security|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7221" PostTypeId="2" ParentId="7219" CreationDate="2016-08-11T08:27:12.817" Score="0" Body="&lt;p&gt;Avast in my opinion, for either Windows or Linux although I generally only use the Linux version to scan windows partitons. I use selinux to secure Linux machines. It's not an antivirus but it stops programs writing to locations and areas of memory that it shouldn't need to. I've never needed an antivirus on Linux as programs need root access to install and you'd have to be pretty dumb to enter your root password just cos it randomly asked for it. &lt;/p&gt;&#xA;" OwnerUserId="5545" LastActivityDate="2016-08-11T08:27:12.817" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7222" PostTypeId="1" CreationDate="2016-08-11T12:08:49.653" Score="2" ViewCount="165" Body="&lt;p&gt;I'm migrating some iTunes albums from my Mac to Elementary. When I add them to noise the songs are all out of order and there's no artwork. I tried Clementine to compare and that viewed the files correctly ordered and with artwork. I tried to amend the file but the edit details were all correct. Is there any way this can be fixed? &lt;/p&gt;&#xA;" OwnerUserId="5791" LastActivityDate="2017-02-16T19:15:13.380" Title="Track order for m4a files" Tags="|music|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7223" PostTypeId="1" AcceptedAnswerId="7238" CreationDate="2016-08-11T13:54:50.117" Score="0" ViewCount="764" Body="&lt;p&gt;Had a while ago moved from Xubuntu 16.04 to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Xubuntu, I had a separate '/home' partition, with a lot of stuff. When I clean installed elementary OS, it didn't erase the '/home' partition, as I was expecting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rather, it has created a new '/home' folder on the root partition itself.  &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is there any way to merge and move it from root, to that separate home partition from xubuntu?  &lt;/li&gt;&#xA;&lt;li&gt;Otherwise would not mind if the Xubuntu home needs to be erased to create a new one separate from root. But merging would be neat, though not necessary.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Some notes -   &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;elementary OS root alloted 20gb. So it shares with its own '/home' folder.  &lt;/li&gt;&#xA;&lt;li&gt;'/home' partition from Xubuntu has 20gb of its own.  &lt;/li&gt;&#xA;&lt;li&gt;Had installed eOS by selecting the automatic, &quot;Wipe Xubuntu for a clean elementary OS install&quot; rather than the manual disk partition setup.   &lt;/li&gt;&#xA;&lt;li&gt;Already has a backup of '/home' of Xubuntu.  &lt;/li&gt;&#xA;&lt;li&gt;Has installed GNOME Disk Utitlity.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5822" OwnerDisplayName="arjun" LastEditorUserId="308" LastEditDate="2018-08-07T17:15:56.403" LastActivityDate="2018-08-07T17:15:56.403" Title="elementary OS attach separate partition '/home' from previous install" Tags="|release-freya|system-installation|dual-boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="7224" PostTypeId="1" CreationDate="2016-08-11T19:46:22.543" Score="1" ViewCount="184" Body="&lt;p&gt;I have tried to install &lt;a href=&quot;https://ipfs.io/docs/install/&quot; rel=&quot;nofollow&quot;&gt;ipfs&lt;/a&gt; using their instructions. Yet I don't seem to be able to get it to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could anyone help me with this,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sampath :):)&lt;/p&gt;&#xA;" OwnerUserId="5824" LastEditorUserId="5824" LastEditDate="2016-08-11T22:11:24.483" LastActivityDate="2018-04-15T18:20:11.693" Title="Trying to Install and run ipfs on elementary os" Tags="|software-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7226" PostTypeId="2" ParentId="4311" CreationDate="2016-08-11T23:56:50.827" Score="1" Body="&lt;p&gt;You can fix the indicator icon to match the elementary indicators style:&#xA;&lt;a href=&quot;https://github.com/mank319/elementaryPlus/issues/335&quot; rel=&quot;nofollow&quot;&gt;https://github.com/mank319/elementaryPlus/issues/335&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5826" LastActivityDate="2016-08-11T23:56:50.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7227" PostTypeId="1" CreationDate="2016-08-11T23:57:25.687" Score="1" ViewCount="33" Body="&lt;p&gt;Installation of elementary OS was successful but when I attempt to boot into elementary OS that drive doesn't show up with the other bootable drives. I can see the drive in Disk Utility but I cannot mount it.&lt;/p&gt;&#xA;" OwnerUserId="5827" LastEditorUserId="308" LastEditDate="2018-08-07T16:56:51.300" LastActivityDate="2018-08-07T16:56:51.300" Title="Cannot boot elementary OS from external drive from OS X" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7228" PostTypeId="2" ParentId="7227" CreationDate="2016-08-12T12:10:39.480" Score="1" Body="&lt;p&gt;You should install a bootloader that supports running other OSs than Apple made. My fav is &lt;a href=&quot;http://www.rodsbooks.com/refind/&quot; rel=&quot;nofollow&quot;&gt;rEFInd&lt;/a&gt;. When you're done, you can select any OS from any drive connected to your Mac (I assume you don't hackintosh).&lt;/p&gt;&#xA;" OwnerUserId="1164" LastActivityDate="2016-08-12T12:10:39.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7230" PostTypeId="2" ParentId="5007" CreationDate="2016-08-12T14:43:41.227" Score="3" Body="&lt;p&gt;You can install &lt;code&gt;preload&lt;/code&gt; and &lt;code&gt;zram-config&lt;/code&gt;. It will make it a bit faster and it will use less ram. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Elementary install &lt;code&gt;gnome-system-monitor&lt;/code&gt; first to check your ram usage.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open it, got to Resources and see how much ram is using.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now install preload&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install preload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you have a 32 bit machine and &lt;em&gt;less than 4 gb of ram&lt;/em&gt;, you can also install zram-config&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install zram-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot your machine and then run System Monitor again and see if it made a difference. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do this in Xubuntu also.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="26" LastEditDate="2016-09-11T18:38:35.087" LastActivityDate="2016-09-11T18:38:35.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7232" PostTypeId="1" CreationDate="2016-08-13T12:07:01.297" Score="1" ViewCount="589" Body="&lt;p&gt;I've tried to breathe new life into my aging CF-19 MK1 by loading elemenary rather than Windows which it was struggling with.&#xA;Its a nice looking OS and everything important works except the sound. If I plug in headphones it works ok but if I try to use the computers speaker nothing happens. Even tried connecting to a bluetooth speaker and that doesn't work either. Alsa mixer shows the volumes turned up. In settings it only shows onboard sound and in stereo. There is only a mono speaker in the computer.&#xA;Have tried Linux Mint as well and that has the same issues. &#xA;New to Linux and not too sure where to go from here, any help would be gratefully recieved.&lt;/p&gt;&#xA;" OwnerUserId="5837" LastActivityDate="2016-08-13T12:07:01.297" Title="Panasonic CF-19 MK1 toughbook sound issue. Headphones work but internal speaker doesn't" Tags="|sound|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7235" PostTypeId="1" AcceptedAnswerId="7237" CreationDate="2016-08-14T12:47:03.953" Score="3" ViewCount="537" Body="&lt;p&gt;Where can I download Luna? All the files are gone from SourceForge.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Yes, I know that Freya is out, I know that Luna is not supported anymore. I need a link to a Luna ISO.)&lt;/p&gt;&#xA;" OwnerUserId="5844" LastEditorUserId="5565" LastEditDate="2016-10-05T06:26:59.567" LastActivityDate="2016-10-05T06:26:59.567" Title="Where can I download Luna?" Tags="|system-installation|luna|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-09T00:24:11.980" ContentLicense="CC BY-SA 3.0" />
  <row Id="7237" PostTypeId="2" ParentId="7235" CreationDate="2016-08-14T14:28:38.840" Score="3" Body="&lt;p&gt;Okay, first of all, I would like to express how disappointed I am for having to spend more than an hour trying to download the previous release of what is currently one of the most popular distributions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the developers certainly have the right to decide what they are going to host, I believe it is a reasonable expectation of users who may have come to depend on your software that earlier versions will be available for download as long as the project is alive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, given that one can still find the ISO on different trackers, the checksum of which &lt;em&gt;does&lt;/em&gt; &lt;em&gt;not&lt;/em&gt; &lt;em&gt;match&lt;/em&gt; &lt;a href=&quot;https://old.elementary.io/answers/what-are-the-checksums-for-the-elementary-luna-isos&quot; rel=&quot;nofollow&quot;&gt;the official&lt;/a&gt;, I’d say removing the downloads is even irresponsible.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For those who still wish to download Elementary OS Luna, someone has shared it &lt;a href=&quot;https://docs.google.com/file/d/0B9M1TKaD_dgIQWVWVzRqUUhLUkk/view&quot; rel=&quot;nofollow&quot;&gt;on Google Drive&lt;/a&gt;. SHA256 checks out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that link goes down, contact me at adam@jooadam.hu, and I will make it available somewhere.&lt;/p&gt;&#xA;" OwnerUserId="5844" LastActivityDate="2016-08-14T14:28:38.840" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7238" PostTypeId="2" ParentId="7223" CreationDate="2016-08-14T15:05:17.080" Score="0" Body="&lt;p&gt;you can follow &lt;a href=&quot;https://help.ubuntu.com/community/Partitioning/Home/Moving&quot; rel=&quot;nofollow&quot;&gt;these instructions&lt;/a&gt; to move your Xubuntu home partition. Instead of creating a new partition you can use the xubuntu one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like the article says Rsync can be used to copy the files over to your seperate home partition, but the same command can also be used to merge them. Pay attention however if a file with the same name exists on both the current home and the new home it will always keep the file with the most recent 'last modified' date.&lt;/p&gt;&#xA;" OwnerUserId="124" LastActivityDate="2016-08-14T15:05:17.080" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7240" PostTypeId="1" CreationDate="2016-08-14T19:29:01.097" Score="1" ViewCount="2582" Body="&lt;p&gt;Installed elementary OS to dual boot with Windows 8.1. After the request to reboot there is only a grub prompt. Now I cannot access Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solutions to allow access to Windows? And elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;oDK&lt;/p&gt;&#xA;" OwnerUserId="5846" LastEditorUserId="2511" LastEditDate="2016-08-16T00:23:10.080" LastActivityDate="2017-06-26T08:37:36.160" Title="Grub prompt after Installation" Tags="|grub|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7241" PostTypeId="1" AcceptedAnswerId="7253" CreationDate="2016-08-14T19:52:45.077" Score="0" ViewCount="88" Body="&lt;p&gt;This behavior is bit annoying in pantheon files manager. I'm not sure this is really a bug or default behavior. When I go to the next hierarchy by clicking an icon, pressing &quot;back&quot; button takes me to the previous window. So far fine. But clicking &quot;right arrow&quot; takes me to the first folder but it should take me to the next folder(next to the previous selection). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I'm confusing, there are A, B, C, D icons and I'm clicking C. Now I'm in new window with files C1, C2.... Now I'm pressing back button. And I'm selecting right arrow in my first window,now it should take me to the icon D, instead A is selected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Files version: 0.2.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could someone help me here?&lt;/p&gt;&#xA;" OwnerUserId="5847" LastEditorUserId="5847" LastEditDate="2016-08-14T20:03:06.487" LastActivityDate="2016-08-17T09:10:34.123" Title="File manager doesn't remember the previous view" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7243" PostTypeId="1" CreationDate="2016-08-14T20:52:18.613" Score="3" ViewCount="249" Body="&lt;p&gt;Currently my login screen is on my secondary smaller moniter(VGA) and I would like it to appear on my main monitor (DVI) anyway to do this at all? Thank you. &lt;/p&gt;&#xA;" OwnerUserId="5848" LastActivityDate="2018-09-21T21:00:59.350" Title="How can I get my Login Screen to appear on my primary monitor?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7246" PostTypeId="1" CreationDate="2016-08-15T08:47:39.547" Score="0" ViewCount="1060" Body="&lt;p&gt;I would like my windows to slide up/down, like how Linux Mint animates. Is it possible? And if yes, then how?&lt;/p&gt;&#xA;" OwnerUserId="9044" OwnerDisplayName="Yoshida Yuuzan" LastEditorUserId="5565" LastEditDate="2016-10-05T21:43:00.790" LastActivityDate="2016-10-05T21:43:00.790" Title="Animate windows with slide up/down like Linux Mint" Tags="|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7247" PostTypeId="1" CreationDate="2016-08-15T19:16:56.560" Score="0" ViewCount="76" Body="&lt;p&gt;There seems to be a problem when trying to download elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cnsole error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncaught ReferenceError: release_title is not defined&lt;/p&gt;&#xA;" OwnerUserId="5857" LastActivityDate="2016-08-15T20:53:55.750" Title="Unable to download elementary os freya" Tags="|elementary-website|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7249" PostTypeId="2" ParentId="7247" CreationDate="2016-08-15T20:53:55.750" Score="1" Body="&lt;p&gt;Answered &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7247/unable-to-download-elementary-os-freya#comment10446_7247&quot;&gt;in the comments&lt;/a&gt; by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/5857/kristiqn-terziev&quot;&gt;OP&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;var release_title = &quot;Freya&quot;; var release_version = '0.3';&lt;/code&gt; In the console fixed it :D&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="2926" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-15T20:53:55.750" CommentCount="0" CommunityOwnedDate="2016-08-15T20:53:55.750" ContentLicense="CC BY-SA 3.0" />
  <row Id="7252" PostTypeId="1" AcceptedAnswerId="7258" CreationDate="2016-08-17T01:39:09.217" Score="6" ViewCount="2965" Body="&lt;p&gt;How do I change the logout shortcut?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently it is set to &lt;code&gt;CMD + L&lt;/code&gt;. I cannot find such setting in Settings-&gt;Keyboard-&gt;Shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is terribly inconvenient  for me as I switch frequently from OSX to elementaryOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, setting this does not work:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.gnome.desktop.lockdown disable-lock-screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5835" LastEditorUserId="68" LastEditDate="2016-10-01T23:25:57.413" LastActivityDate="2016-10-01T23:25:57.413" Title="Change lock screen shortcut?" Tags="|release-freya|release-loki|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7253" PostTypeId="2" ParentId="7241" CreationDate="2016-08-17T09:10:34.123" Score="1" Body="&lt;p&gt;The most recent version of Files (0.3) has fixed this behaviour with respect to the back button and the back key.  Returning to the previous folder using some other method does not remember current folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;see &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1495896&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1495896&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-08-17T09:10:34.123" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7254" PostTypeId="1" AcceptedAnswerId="7273" CreationDate="2016-08-17T16:21:56.890" Score="3" ViewCount="685" Body="&lt;p&gt;I wanted to check if there is some documentation on how to make an App available in the elementary (Loki) App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have gathered that the application needs to be on GitHub and some hooks needs to be set up to link the GitHub repository for the app into Houston to build the app, have it reviewed and get it published on App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have developed an app (Nutty) and build it on Launchpad (&lt;a href=&quot;https://launchpad.net/nutty&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/nutty&lt;/a&gt;) which also hosts the ppa for users to install the app. I have now created a repository on GitHub for Nutty - &lt;a href=&quot;https://github.com/babluboy/nutty&quot; rel=&quot;nofollow&quot;&gt;https://github.com/babluboy/nutty&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Need some help in how to hook the app into Houston.&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2016-08-19T16:17:15.823" Title="How to publish an App in elementary (Loki) AppCenter" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7255" PostTypeId="2" ParentId="2657" CreationDate="2016-08-17T19:51:48.000" Score="3" Body="&lt;p&gt;Lewis G's approach worked for me on Loki, but needed a bit of tinkering. It also wound up being quite a bit slower than necessary, as gsettings list-recursively repeated a bunch of keys. Here's a one-liner that should do it all. It skips the temp file and runs much faster by removing repeated lines.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;for line in `gsettings list-recursively | grep '^\S*' |awk '{ print  $1 }' | uniq`; do gsettings reset-recursively $line; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5866" LastActivityDate="2016-08-17T19:51:48.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7256" PostTypeId="2" ParentId="3223" CreationDate="2016-08-17T23:42:48.367" Score="1" Body="&lt;p&gt;this happened because you did not dismount о drive on the virtual machine.&lt;/p&gt;&#xA;" OwnerUserId="5867" LastActivityDate="2016-08-17T23:42:48.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7257" PostTypeId="2" ParentId="7219" CreationDate="2016-08-18T04:30:04.177" Score="1" Body="&lt;p&gt;If you need a system integrated solution I would suggest the Open Source Antivirus &lt;a href=&quot;https://www.clamav.net/&quot; rel=&quot;nofollow&quot; title=&quot;ClamAV® is an open source antivirus engine for detecting trojans, viruses, malware &amp;amp; other malicious threats.&quot;&gt;ClamAV&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install clamav&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;or its GTK graphical user interface &lt;a href=&quot;https://github.com/dave-theunsub/clamtk/&quot; rel=&quot;nofollow&quot; title=&quot;GUI for ClamAV&quot;&gt;ClamTK&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install clamtk&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is intended to be an easy to use, light-weight, on-demand scanner&#xA;for Linux systems. It has been ported to Fedora, Debian, RedHat,&#xA;openSUSE, ALT Linux, Ubuntu, CentOS, Gentoo, Archlinux, Mandriva,&#xA;PCLinuxOS, Frugalware, FreeBSD, and others.&lt;/p&gt;&#xA;" OwnerUserId="2511" LastActivityDate="2016-08-18T04:30:04.177" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7258" PostTypeId="2" ParentId="7252" CreationDate="2016-08-18T04:52:09.783" Score="5" Body="&lt;h1&gt;Change shortcut&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;To change the shortcut to (for example) &lt;kbd&gt;Cmd&lt;/kbd&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;&lt;kbd&gt;L&lt;/kbd&gt; run the following in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys screensaver &quot;&amp;lt;Super&amp;gt;&amp;lt;Ctrl&amp;gt;l&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Disable screensaver&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys screensaver &quot;[]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No more accidental locks when trying to hit Chrome's omnibar! ;)&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Restore default shortcut&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.settings-daemon.plugins.media-keys screensaver&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5835" LastEditorUserId="68" LastEditDate="2016-10-01T23:25:06.847" LastActivityDate="2016-10-01T23:25:06.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7259" PostTypeId="1" CreationDate="2016-08-18T12:52:30.777" Score="1" ViewCount="138" Body="&lt;p&gt;Firstly my computer is 64-bit. I know this as I ran &lt;code&gt;lscpu&lt;/code&gt; in the terminal and got this result for the CPU mode:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CPU op-mode(s):        32-bit, 64-bit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I try to install either the Freya or Loki 64-bit versions the computer just freezes*.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer specs are as follows&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CPU: Quad-Core Intel® Core™2 Quad CPU Q6700 @ 2.66GHz&#xA;RAM: 4 GB  &#xA;GPU: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I followed all the official instructions from the elementary website and created a bootable usb drive using rufus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*edit&#xA;it freezes at different parts of the installation stage each time- often when sorting out the partitions and sometimes in the final setup   ; the loader stops spinning and i am unable to move the mouse&lt;/p&gt;&#xA;" OwnerUserId="5870" LastEditorUserId="5870" LastEditDate="2016-08-19T21:59:15.193" LastActivityDate="2016-08-19T21:59:15.193" Title="why won't freya 64bit or loki 64 bit work on my computer?" Tags="|system-installation|64-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7260" PostTypeId="2" ParentId="7100" CreationDate="2016-08-18T14:42:08.137" Score="1" Body="&lt;p&gt;No, time and date are set according to your language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xu803.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xu803.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-18T14:42:08.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7261" PostTypeId="2" ParentId="7259" CreationDate="2016-08-18T14:44:45.273" Score="1" Body="&lt;p&gt;Just because your &lt;a href=&quot;http://ark.intel.com/products/30790/Intel-Core2-Quad-Processor-Q6700-8M-Cache-2_66-GHz-1066-MHz-FSB&quot; rel=&quot;nofollow&quot;&gt;Intel® Core™2 Quad Processor Q6700 &lt;/a&gt; supports 64-bit doesn't necessarily mean that it's 64-bit mode supports everything elementary OS requires. Seeing as this is a 2007 CPU, I would guess that some 64-bit modes are not available, likely related to the graphics.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-18T14:44:45.273" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7262" PostTypeId="1" CreationDate="2016-08-18T15:48:23.817" Score="1" ViewCount="607" Body="&lt;p&gt;Is there a way to disable those sticky edges (where the window resizes when it is moved into the edge of the screen) through command line/dconf editor?&lt;/p&gt;&#xA;" OwnerUserId="55" LastEditorUserId="5565" LastEditDate="2016-10-06T20:52:35.927" LastActivityDate="2021-09-13T13:05:30.147" Title="How do you disable edge tiling?" Tags="|gala|settings|window-manager|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7263" PostTypeId="1" CreationDate="2016-08-18T19:00:29.137" Score="2" ViewCount="92" Body="&lt;p&gt;I run freya 0.3.2. Today I did a system update that updated the update manager. after reboot the update manager tells me my hardware enablement stack was supported until Aug 4 2016 only and that there is an upgrade available. The window has an install button. When I click install, there is an error message telling me the upgrade cannot be installed because of unresolved dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I'm not aware of having made any changes to the system except the regular upgrades , I wonder if this is a general problem or if it has to do with my hardware. I have a fairly recent Dell Inspiron 15 (5559), Intel i7-6500U, AMD Radeon R5 M335. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas about/experiences with this?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-08-19T16:29:38.100" Title="Can't install new enablement stack (August 2016) because of unresolved dependencies" Tags="|release-freya|hardware|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7264" PostTypeId="1" AcceptedAnswerId="9131" CreationDate="2016-08-18T19:51:52.590" Score="1" ViewCount="44" Body="&lt;p&gt;I'm using Elementary on notebook with 1TB HDD and 16GB SSD. I've installed Elementary on SSD and cut HDD into two partitions: one with windows in NTFS and other in ext4 as additional space for documents and programms. How can i install programms in that partition (or, maybe, mount that partition as a part of / directory)?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-11-07T09:36:58.927" Title="How to install programms on the multiple partitions?" Tags="|software-installation|mount|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7265" PostTypeId="1" AcceptedAnswerId="7319" CreationDate="2016-08-19T10:23:15.457" Score="9" ViewCount="3798" Body="&lt;p&gt;Anyone getting this? Is there a way to get rid of it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TWFFp.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TWFFp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;New important security and hardware support update&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;WARNING: Security updates for your current Hardware Enablement Stack ended on 2016-08-04: *&lt;a href=&quot;http://wiki.ubuntu.com/1404_HWE_EOL&quot; rel=&quot;noreferrer&quot;&gt;http://wiki.ubuntu.com/1404_HWE_EOL&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="80" LastActivityDate="2016-08-23T15:40:45.780" Title="New important security and hardware support update" Tags="|release-freya|updates|security|" AnswerCount="5" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="7266" PostTypeId="2" ParentId="7112" CreationDate="2016-08-19T10:58:02.407" Score="1" Body="&lt;p&gt;If you have the same thing, you can solve it without reinstalling the OS:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot your system in nornal mode&lt;/li&gt;&#xA;&lt;li&gt;in the pantheon greeter prompt press&lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;Alt&lt;/code&gt;+&lt;code&gt;F1&lt;/code&gt; to drop to TTY1&lt;/li&gt;&#xA;&lt;li&gt;login with your new password&lt;/li&gt;&#xA;&lt;li&gt;change your password yo previous.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, i don't know how to change &lt;code&gt;\home&lt;/code&gt; folder encryption passkey.( &lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-08-19T10:58:02.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7267" PostTypeId="1" CreationDate="2016-08-19T11:47:57.863" Score="0" ViewCount="47" Body="&lt;p&gt;I have been using eOS for more than a year now and I am happy with it. Great systems. Congrats to the developers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am getting updates offered for probably all languages spoken anywhere on the world again and again. As I live in Switzerland I have the settings language=german, formats=swiss.&#xA;Each time I unselect these dozens of languages I do not want on my system and I never selected or installed anywhere. With the only result that I get a notification right away after the remaining updates are installed that more updates (guess what: dozens of language packs) are wating for installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is kind of ridiculous. Is there no option that updates once rejected should not be offered again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings&#xA;Ulrich&lt;/p&gt;&#xA;" OwnerUserId="5876" LastActivityDate="2016-09-20T22:54:56.797" Title="Language Packs not needed offered for update again+again" Tags="|updates|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7269" PostTypeId="2" ParentId="7265" CreationDate="2016-08-19T12:13:21.887" Score="-3" Body="&lt;p&gt;This discussion could maybe to help you :&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2334371&amp;amp;s=80a71093709f97cf78a5eaa0ef2aa50d&quot; rel=&quot;nofollow&quot;&gt;https://ubuntuforums.org/showthread.php?t=2334371&amp;amp;s=80a71093709f97cf78a5eaa0ef2aa50d&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5878" LastActivityDate="2016-08-19T12:13:21.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7270" PostTypeId="1" AcceptedAnswerId="8428" CreationDate="2016-08-19T14:38:41.497" Score="2" ViewCount="1817" Body="&lt;p&gt;When you just change your password the passkey isn't changing (Maybe, it's a bug?). So, how to change it?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-10-09T05:42:32.240" Title="How to change password of /home folder encrypting?" Tags="|security|home|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7271" PostTypeId="1" AcceptedAnswerId="7292" CreationDate="2016-08-19T14:47:28.907" Score="2" ViewCount="472" Body="&lt;p&gt;I'm using Elementary on Lenovo S540 laptop, which has separate HDD and SSD. I've installed OS on the SSD and create a swap area. Can i delete this swap on SSD and create another on HDD?  &lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:02.517" LastActivityDate="2018-05-15T12:30:02.517" Title="How to change swap area partition?" Tags="|system|ssd|hdd|swap|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7272" PostTypeId="1" CreationDate="2016-08-19T16:10:14.357" Score="0" ViewCount="64" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SzGdp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SzGdp.jpg&quot; alt=&quot;MY LAPTOP HP COMPAQ NX6320&quot;&gt;&lt;/a&gt;[![HALF WAY PAUSED INSTALLATION ]..During installation Elementary OS Freya, I clicked on Install Elementary ,Then when &quot;Preparing to Elementary screen comes simply clicked on 2 options  DOWNLOAD UPDATES WHILE AND INSTALLING AND INSTALL 3rd-PARTY SOFTWARE and clicked continue .After that the black wheel just rotating and rotating,,2 hours gone nothing comes.....&#xA;&lt;a href=&quot;https://i.stack.imgur.com/URQad.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/URQad.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;PLEASE I NEED HELP&#xA;BY THE WAY&#xA;MY LAPTOP - HP COMPAQ NX6320 (PRETTY OLD MODEL) 8 YEARS APPROX.&#xA;RAM - 1 GB&#xA;HDD- 80 GB&#xA;NO GRAPHICS CARD&#xA;I SUCCESSFULLY INSTALLED OS LIKE WINDOWS ALL VERSIONS INCLUDING WINDOWS 10,UBUNTU 16.04 LTS,LINUX MINT,ON THIS ABOVE SAID LAPTOP.&lt;/p&gt;&#xA;" OwnerUserId="5882" LastEditorUserId="5882" LastEditDate="2016-08-20T08:49:47.280" LastActivityDate="2016-09-24T22:26:16.670" Title="Elementary OS 0.3 Freya can't be installed" Tags="|system-installation|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7273" PostTypeId="2" ParentId="7254" CreationDate="2016-08-19T16:17:15.823" Score="1" Body="&lt;p&gt;From Blake Kostner (Houston developer):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sorry to say Houston is not ready for prime time yet. The current development focus is the store, and everything needed for the Loki release. We will make an announcement once Houston is released though.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-08-19T16:17:15.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7274" PostTypeId="2" ParentId="7263" CreationDate="2016-08-19T16:29:38.100" Score="1" Body="&lt;p&gt;The correct way to upgrade to the Xenial Hardware Enablement Stack via the command line is like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully that will give you a more helpful error message, if it's still a problem at all.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-19T16:29:38.100" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7276" PostTypeId="1" AcceptedAnswerId="7277" CreationDate="2016-08-19T19:50:10.277" Score="2" ViewCount="21" Body="&lt;p&gt;Is it possible to change default blue pic to smth another?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-08-19T21:28:42.530" Title="How can i change userpic on the start screen?" Tags="|display|user-interface|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7277" PostTypeId="2" ParentId="7276" CreationDate="2016-08-19T21:17:09.527" Score="1" Body="&lt;p&gt;System Settings &gt;&gt; User Accounts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unlock in upper right with password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the picture placeholder&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to the picture you want to use, and you're all set!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/mFXM00hJxnk&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/mFXM00hJxnk&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="423" LastEditDate="2016-08-19T21:28:42.530" LastActivityDate="2016-08-19T21:28:42.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7278" PostTypeId="1" CreationDate="2016-08-19T22:07:58.197" Score="0" ViewCount="736" Body="&lt;p&gt;I feel that with all the additional apps pre-installed, and relying heavily on deriving elements from Ubuntu and Gnome, elementary must be heavy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I would like to know an as-quantitative-as-possible analysis of how heavy the OS is on RAM (and may be the system in overall) compared to Classic-Ubuntu/Gnome-Ubuntu. This is  a problem that every user who is stunned by the awesomeness of Pantheon would like to get an answer to, before switching their OS/Desktop, so that they don't feel the hesitation that it would slow down their PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: Please feel free to add external links that may be helpful, but as of now I haven't been able to find a proper place that provides some sane discussion of this technical overhead comparison.&lt;/p&gt;&#xA;" OwnerUserId="5597" LastEditorUserId="26" LastEditDate="2016-09-25T16:56:26.033" LastActivityDate="2016-09-25T16:56:26.033" Title="How heavy is elementary over classic ubuntu?" Tags="|ubuntu|gnome|overheat|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7279" PostTypeId="1" CreationDate="2016-08-20T00:36:03.563" Score="1" ViewCount="1354" Body="&lt;p&gt;New PC, installed Loki, everything was fine until I downloaded the nvidia drivers using these links:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://forlearning.com/graphic-drivers-for-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forlearning.com/graphic-drivers-for-elementary-os/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://gist.github.com/jansanchez/ce5b0ca1c5e538f4b266&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/jansanchez/ce5b0ca1c5e538f4b266&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After I rebooted I try to log in and get kicked right back out. I've tried everything on this thread ( &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2443/cant-login-after-upgrade&quot;&gt;Can&amp;#39;t login after upgrade&lt;/a&gt; ) besides downgrading the kernel and nothing fixes the issue. When I try to create a new user I can log in via the command line only view, but on the graphical log in screen I cannot pick a new user even though a new user &quot;icon&quot; shows up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1:&lt;/strong&gt; Removed the .Xauthority file per this answer ( &lt;a href=&quot;https://askubuntu.com/questions/367260/i-am-logged-out-immediately-after-logging-in&quot;&gt;https://askubuntu.com/questions/367260/i-am-logged-out-immediately-after-logging-in&lt;/a&gt;), restarted lightdm, this did not fix the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2:&lt;/strong&gt; Moved the .Xauthority file per this answer ( &lt;a href=&quot;https://askubuntu.com/questions/20929/gnome-x-logs-off-immediately-after-login-which-logfiles-are-relevant/178622#178622&quot;&gt;https://askubuntu.com/questions/20929/gnome-x-logs-off-immediately-after-login-which-logfiles-are-relevant/178622#178622&lt;/a&gt; ) this did not fix the issue. Also of note, I can log via text with a different user, but when I try to flip to the graphical mode it boots me back to the graphical log in screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 3:&lt;/strong&gt; Per this answer ( &lt;a href=&quot;https://serverfault.com/questions/384676/linux-closing-connection-after-successful-login&quot;&gt;https://serverfault.com/questions/384676/linux-closing-connection-after-successful-login&lt;/a&gt; ) I made sure /bin/bash was there. It was. I also made sure the shell was there. It was. Something else that might be of interest, I checked the permissions on my .Xauthority file on my working Freya machine, they match the permissions on my Loki machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 4:&lt;/strong&gt; This user is having the same problem (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2568/i-cant-login-return-to-login-screen-it-isnt-xauthority?rq=1&quot;&gt;I can&amp;#39;t login , return to login screen (it isn&amp;#39;t Xauthority)&lt;/a&gt; ). I uninstalled elementary-tweaks, rebooted, this did not fix the issue. As far as I know I do not have numix-icon installed, whatever that is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 5:&lt;/strong&gt; Per this site (&lt;a href=&quot;https://www.computersnyou.com/4947/how-to-solve-ubuntu-login-loop-quick-tip/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.computersnyou.com/4947/how-to-solve-ubuntu-login-loop-quick-tip/&lt;/a&gt;) I purged/reinstalled lightdm. That did not fix the issue. I purged lightdm and installed gdm. That borked everything. I get a text only login for a second then nothing, my monitor doesn't recognize an input and turns off. At this point I'm researching some sort of repair install. Last resort, reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 6:&lt;/strong&gt; I can get to a GRUB menu and recovery mode. Not sure what would be the best option here though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 7:&lt;/strong&gt; Got to the root shell via recovery mode, purged gdm and reinstalled lightdm. That said, it's still not exactly to the way it was before. If I don't get into a text login screen the graphical login screen will flash after a minute or two then the whole screen goes black and the monitor shuts off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 8:&lt;/strong&gt; Seems like this person was having a similar issue (&lt;a href=&quot;http://elementaryosandmore.blogspot.com/2013/12/how-to-fix-elementaryos-after.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://elementaryosandmore.blogspot.com/2013/12/how-to-fix-elementaryos-after.html&lt;/a&gt;) I checked for any packages with the word nvidia in them, there were none.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 9:&lt;/strong&gt; Now I'm just trying to uninstall the nvidia drivers via command line. I followed this link (&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1432857&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=1432857&lt;/a&gt; ) and got the following error message when running 'sudo rmmod nvidia' &quot;ERROR: Module nvidia is in use by: nvidia_modeset&quot;. I have an xorg.conf file but I'm cautious about changing the settings in the file while the module is still loaded. Additionally, googling that error message got me to this link (&lt;a href=&quot;https://askubuntu.com/questions/109681/which-process-is-using-nvidia-module&quot;&gt;https://askubuntu.com/questions/109681/which-process-is-using-nvidia-module&lt;/a&gt;) and when I run lsof -n -w -t /dev/nvidia* I get no PID.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-19T21:44:15.253" Title="I get logged out as soon as I log in" Tags="|greeter|release-loki|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7280" PostTypeId="1" AcceptedAnswerId="8739" CreationDate="2016-08-20T02:36:18.737" Score="1" ViewCount="417" Body="&lt;p&gt;When and how will I be able to run elementary on Mir/Wayland display server? Is it going to be possible on the first release of Unity 8?&lt;/p&gt;&#xA;" OwnerUserId="5597" LastEditorUserId="7131" LastEditDate="2016-10-30T11:48:56.180" LastActivityDate="2016-10-30T11:48:56.180" Title="Using Mir display server with elementary" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7281" PostTypeId="2" ParentId="7279" CreationDate="2016-08-20T02:45:24.743" Score="1" Body="&lt;p&gt;Success!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nvidia-uninstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;killed the nvidia driver I put in there and returned me back to normal. Thanks &lt;a href=&quot;https://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely&quot;&gt;https://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely&lt;/a&gt; . Then (bonus)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;adds the software &amp;amp; updates app into elementary so you can choose an nvidia driver the correct way.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-19T21:44:15.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7283" PostTypeId="2" ParentId="7278" CreationDate="2016-08-20T11:55:56.093" Score="2" Body="&lt;p&gt;&quot;additional apps pre-installed&quot; implies that original Ubuntu and Gnome apps are present. Except where no alternative is available, they are not. We don't ship with both the Unity and Pantheon desktop installed, just Pantheon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;recommended system specifications&lt;/a&gt; are as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Without these basics your installation will suffer. That said, Loki (I believe) will turn-off animations to degrade the experience, but improve the performance, of the system once it is release.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-20T11:55:56.093" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7285" PostTypeId="2" ParentId="7265" CreationDate="2016-08-20T13:01:09.217" Score="1" Body="&lt;p&gt;Ubuntu provides Hardware Enablement Stacks (HWE) for various kernels. The latest messages relate to a bunch of HWEs whose EOLs (End-of-long-term support??) ended of August 4, 2016. I've received the same message on my system. Running hwe-support-status tells me there is a graphics stack that needs to be upgraded. Seems like an upgrade is in order. I changed settings on my Software Updater to notify me if there is a new LTS version. I'm not if this will help, either me or anyone else. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've noted another problem. I installed Elementary using an ISO image from a USB stick. It now seems that, in order to fix this HWE issue, I need to have the volume mounted to try and find the original HWE stack-related packages. More updates to follow once I have located the USB with the image.&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2016-08-20T13:01:09.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7286" PostTypeId="1" AcceptedAnswerId="8371" CreationDate="2016-08-20T13:39:06.877" Score="0" ViewCount="1617" Body="&lt;p&gt;I can't run megasync on elementary OS Loki Beta 2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary OS client here (&lt;a href=&quot;https://mega.nz/#sync&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mega.nz/#sync&lt;/a&gt;) is for Freya and It has some conflict with libcrypto. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Ubuntu 16.04 Client, the log says Started but the folder doesn't sync and I can't see any GUI window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Debug file: &lt;a href=&quot;http://pastebin.com/EuG33Dvp&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pastebin.com/EuG33Dvp&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4717" LastEditorUserId="16827" LastEditDate="2019-04-13T07:17:55.840" LastActivityDate="2019-04-13T07:17:55.840" Title="Mega and elementary OS Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="7287" PostTypeId="1" CreationDate="2016-08-20T15:23:04.420" Score="1" ViewCount="78" Body="&lt;p&gt;How do I link my eq to my music downloader ?&lt;/p&gt;&#xA;" OwnerUserId="5892" LastActivityDate="2016-08-20T15:23:04.420" Title="For some reason I am unable to use my equalizer with my new music downloaded app" Tags="|settings|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7288" PostTypeId="2" ParentId="3836" CreationDate="2016-08-20T16:51:10.520" Score="0" Body="&lt;p&gt;I am new to Elementary and wanted my beloved OS X-Desktop back, so I tried this.&#xA;Sadly, changing the nemo-autostart.desktop as mentioned above, somehow does not work for me. Launching it with GTK_CSD=&quot;&quot; nemo from the terminal works fine though.&#xA;Do you have any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="5894" LastActivityDate="2016-08-20T16:51:10.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7290" PostTypeId="2" ParentId="3024" CreationDate="2016-08-20T19:50:52.650" Score="0" Body="&lt;p&gt;If your laptop has a dvd drive, I recommend you boot from a live dvd. Insert the dvd and hold alt/option key until the dvd drive shows. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-20T19:50:52.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7292" PostTypeId="2" ParentId="7271" CreationDate="2016-08-21T08:08:10.540" Score="1" Body="&lt;p&gt;You run Gparted and create a swap partition in the disk. Right click on that partition &gt;&gt;information tab.&#xA;There you locate UUID and location (ex. /dev/sda5). Then you open '/etc/fstab' (can be opened with Sketch or Sublime) and modify the lines &lt;code&gt;#swap was on &amp;lt;prev dev location&amp;gt;&lt;/code&gt; and &lt;code&gt;UUID=&amp;lt;prev UUID&amp;gt;&lt;/code&gt; to new data. Save it (you'll need admin password) and reboot your system. To delete previous swap partition boot any OS (not Windows) from USB or from another disk, run Gparted and delete previous swap partition.&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-08-21T08:08:10.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7293" PostTypeId="1" AcceptedAnswerId="9231" CreationDate="2016-08-21T08:18:44.253" Score="0" ViewCount="251" Body="&lt;p&gt;Or how to install programs on multiple disks?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="5856" LastEditDate="2016-11-13T12:48:58.933" LastActivityDate="2016-11-17T09:31:47.563" Title="How change the default installation path?" Tags="|software-installation|disk-management|filesystem|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7294" PostTypeId="2" ParentId="5541" CreationDate="2016-08-21T08:25:11.343" Score="4" Body="&lt;p&gt;Open system settings &gt; power&#xA;There you can find everything about turning off the screen, adjusting sleep mode, ect.&lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="5856" LastEditDate="2016-09-25T15:57:18.447" LastActivityDate="2016-09-25T15:57:18.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7295" PostTypeId="2" ParentId="4817" CreationDate="2016-08-21T08:26:16.757" Score="1" Body="&lt;p&gt;There is no need for these changes to be made within Freya, as the update is being delivered via the update manager. The correct way to upgrade to the Xenial Hardware Enablement Stack via the command line is like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-21T08:26:16.757" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7297" PostTypeId="2" ParentId="7262" CreationDate="2016-08-21T11:33:12.197" Score="2" Body="&lt;p&gt;If you mean by sticky edges that windows change their appearance when they are moved close to the edge of the screen (e.g. get maximised), you can indeed disable this in elementary freya 0.3.2. The path within dconf-editor would be:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;org - pantheon - desktop - gala - behavior&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you can uncheck the box named edge-tiling.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-08-21T11:33:12.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7299" PostTypeId="1" AcceptedAnswerId="7339" CreationDate="2016-08-22T03:12:00.253" Score="2" ViewCount="203" Body="&lt;p&gt;I'd like to install the Loki beta. When Loki is officially released, will I have to reinstall it? Or can I just upgrade it?&lt;/p&gt;&#xA;" OwnerUserId="3222" LastActivityDate="2016-08-30T12:48:23.190" Title="If I install the Loki beta, will I be able to upgrade to the official release?" Tags="|system-installation|release-loki|updates|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-01T05:07:21.293" ContentLicense="CC BY-SA 3.0" />
  <row Id="7300" PostTypeId="1" CreationDate="2016-08-22T08:26:21.460" Score="0" ViewCount="1804" Body="&lt;p&gt;I bought a laptop recently and installing Loki beta on it.&#xA;Every special key works but backlight control, so I want to create a shortcut for it.&#xA;Already try with xrandr but doesn't work. I found a solution with xbacklight but it doesn't send notification of the change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, my question is, what is the default command to increase and decrease backlight on elementary? I suppose is something with gala or similar, but I can't found myself&lt;/p&gt;&#xA;" OwnerUserId="387" LastActivityDate="2017-10-31T00:32:15.257" Title="backlight command" Tags="|backlight|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7301" PostTypeId="1" CreationDate="2016-08-22T11:30:02.593" Score="1" ViewCount="272" Body="&lt;p&gt;He there! I'm thinking about building my own pc for a while now. I'm using eOS for a week orso, and I really thinking about installing it on my new pc rig to. But because eOS is using a old version of the Linux kernel, my question is: will it run with modern (AMD + NVIDIA, or Itel+NVIDIA) hardware? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Thaha&lt;/p&gt;&#xA;" OwnerUserId="5908" LastActivityDate="2016-09-22T15:53:29.130" Title="Elementary OS on a homemade pc build" Tags="|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7302" PostTypeId="2" ParentId="7265" CreationDate="2016-08-22T12:38:04.960" Score="1" Body="&lt;p&gt;I don't know exactly which is the impact of this update.&#xA;But, today i clicked on button install to run the update and all is ok.&#xA;Before updating my kernel is &lt;code&gt;3.19.0-66-generic&lt;/code&gt; and now is &lt;code&gt;4.4.0-34-generic&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To see kernel version:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;uname -r&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So, my answer not is saying what is this, but I am sharing my experience of having updated and everything is still OK.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;ANSWER UPDATED:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just have a problem...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before, when I close the laptop lid, nothing happens (I did it &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1758/5881&quot;&gt;following this thread&lt;/a&gt;).&#xA;Now, when I close the lid, this error is throwed:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;BUG Unable to handle kernel NULL pointer dereference.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I fix it changing the options &lt;code&gt;lid-close-ac-action&lt;/code&gt; and &lt;code&gt;lid-close-battery-action&lt;/code&gt; from &lt;code&gt;nothing&lt;/code&gt; to &lt;code&gt;blank&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, apparently all is ok again.&lt;/p&gt;&#xA;" OwnerUserId="5881" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-22T21:09:49.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7304" PostTypeId="2" ParentId="7265" CreationDate="2016-08-22T14:02:51.677" Score="1" Body="&lt;p&gt;This dialog isn't super clear, but installing will update elementary's base to Ubuntu LTS 14.04.5. It should be safe to click the &quot;install&quot; button, and when the installation is done, you shouldn't see that dialog anymore. It's only 14.04.04 and earlier that have been end-of-lifed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://wiki.ubuntu.com/1404_HWE_EOL&quot; rel=&quot;nofollow&quot;&gt;link in that dialog&lt;/a&gt; has more details.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-08-22T14:02:51.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7307" PostTypeId="1" AcceptedAnswerId="7331" CreationDate="2016-08-22T18:44:57.787" Score="2" ViewCount="588" Body="&lt;p&gt;0.3.2 Freya on a&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i7-3537U CPU 2.00GHz, &lt;/li&gt;&#xA;&lt;li&gt;NVIDIA GK107M [GeForce GT 740M]&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After getting the dialog box &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7265/new-important-security-and-hardware-support-update&quot;&gt;this&lt;/a&gt; user got, I searched for a solution and eventually used this one:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1764/kernel-version-is-still-3-16-on-freya-0-3-1/1781#1781&quot;&gt;Kernel version is still 3.16 on Freya 0.3.1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a warning, that now I'm now rereading in its full... seriousness:&#xA;&quot;Warning! Be careful and attentive to this, the system can fail. Check packages that will be removed before pressing Y.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And in my case there was two packages. One that had to do with thunderbird and another. That other, I am thinking, did the trouble.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, because I am pretty close to a complete ingnorant when it comes to code, I cannot even remember the name of the package. And now, I fear that when I used the &quot;auto remove&quot; command suggested after running the commands that one package is now missing and prevents my machine from booting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something I can do now to save it? Tomorrow, in a little more than 24h, I have a work deadline, and really thought that this would be just a routine upgrade. I'm using a borrowed machine to write this, but very important files are burried there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do? Any help is apreciated.&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-30T22:04:14.210" Title="Cannot boot after updating newest hardware-enablement stack" Tags="|boot|updates|package-management|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7308" PostTypeId="2" ParentId="724" CreationDate="2016-08-22T19:29:26.143" Score="0" Body="&lt;p&gt;Also have had issues to install elementary OS freya on my new ASUS X556U in dual boot windows10/eOS. this windows version is older than july 29, 2016.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I first followed theese steps (found there : &lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow&quot;&gt;https://itsfoss.com/guide-install-elementary-os-luna/&lt;/a&gt;) :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;create a live USB of Elementary OS Freya and let the usb key in its port&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;defrag windows&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;note the memory reserved to Windows (C ?) and to the Data (D?) in order not to make an error in the future partition step&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;restart windows&lt;/li&gt;&#xA;&lt;li&gt;when it is loading press F2 to access the BIOS (it seems that F1, 10, 11, 12 can work on others PC)&lt;/li&gt;&#xA;&lt;li&gt;in the Security tab disable &quot;secure boot&quot;&lt;/li&gt;&#xA;&lt;li&gt;in the Boot tab enable &quot;Launch CSM&quot; and &quot;Launch PXE opROM policy&quot; (wich in the right column refers to &quot;control the execution of legacy opROM&quot;)&lt;/li&gt;&#xA;&lt;li&gt;press F10 to save and exit&lt;/li&gt;&#xA;&lt;li&gt;restart and when it is loading press AND HOLD Esc.&lt;/li&gt;&#xA;&lt;li&gt;choice to start with USB device (or the mark of the usb key) but not the EFI one&lt;/li&gt;&#xA;&lt;li&gt;I did what itsfoss wrote about partitions with a few differences : &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;--&gt; I didn't delete one device but changed the existing data device from 600000 to 200000 Mo in order to create free space. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&gt; Then I added a 20000 Mo &quot;/&quot; logical beginning ext4 partition (root), a 12000 Mo logical beginning swap area (12 Go is my 6Go RAMx2) (swap), a 100 Mo BIOS boot partition (grub) and a &quot;/home&quot; rest-of-the-free-space Mo logical beginning ext4 partition (home).&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;and followed instructions until a note asked me to restart the system.&lt;/li&gt;&#xA;&lt;li&gt;wich refused to start another OS that windows.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Then I fell into research about grub, boot-repair and sudo apt-get during 3 hours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next &lt;a href=&quot;https://forum.ubuntu-fr.org/viewtopic.php?pid=20542461#p20542461&quot; rel=&quot;nofollow&quot;&gt;https://forum.ubuntu-fr.org/viewtopic.php?pid=20542461#p20542461&lt;/a&gt; saved my mind.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I followed its instructions :&lt;/li&gt;&#xA;&lt;li&gt;start with windows (I didn't have any other choice anyway)&lt;/li&gt;&#xA;&lt;li&gt;right click the window logo in the left bottom corner&lt;/li&gt;&#xA;&lt;li&gt;search the &quot;settings&quot;&lt;/li&gt;&#xA;&lt;li&gt;find &quot;update and security&quot;&lt;/li&gt;&#xA;&lt;li&gt;select &quot;recovery&quot; and &quot;restart now&quot;&lt;/li&gt;&#xA;&lt;li&gt;choice the device option with &quot;EFI&quot; in the name (first choice in my case)&lt;/li&gt;&#xA;&lt;li&gt;follow the steps on the screens . &lt;/li&gt;&#xA;&lt;li&gt;at the partitions steps you will see a new partition on the top of the list called &quot;efi&quot; which is the grub of Windows. So our first grub (BIOS boot partition) does'nt serve anymore i guess. But im not sure and did'nt delete it. For the others partitions the names &quot;/&quot; and &quot;/home&quot; of my ext4 partitions had disappeared in my list so i named them again and checked the &quot;format the partition&quot; box for both.&lt;/li&gt;&#xA;&lt;li&gt;the rest of the steps is well known now&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;THAT WORKS FOR ME !!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(sorry for the translate)&lt;/p&gt;&#xA;" OwnerUserId="5912" LastActivityDate="2016-08-22T19:29:26.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7309" PostTypeId="2" ParentId="6755" CreationDate="2016-08-22T23:20:22.160" Score="1" Body="&lt;p&gt;Thanks to Paul, I was able to find the setting to use the &quot;Classic Theme&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZnzJt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZnzJt.png&quot; alt=&quot;before&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, my OCD could not handle the slight difference shown between the title bar and the tab bar in the screenshot above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's when I installed the Freya Theme for Google:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CPQU0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CPQU0.png&quot; alt=&quot;after&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I prefer this one because it is &lt;strong&gt;perfect&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could link to this, but I need at least 10 repuation to post more than 2 links, and I am the worst.&lt;/p&gt;&#xA;" OwnerUserId="5348" LastActivityDate="2016-08-22T23:20:22.160" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7310" PostTypeId="2" ParentId="7301" CreationDate="2016-08-23T07:06:20.803" Score="0" Body="&lt;p&gt;since elementary OS seems to work well on Dell XPS 15 :&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5231/does-elementary-os-work-on-the-dell-xps-15?rq=1&quot;&gt;Does elementary OS work on the Dell XPS 15?&lt;/a&gt;&#xA;It should work with modern hardware, the XPS 15 having Intel+Nvidia config&lt;/p&gt;&#xA;" OwnerUserId="5512" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-08-23T07:06:20.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7311" PostTypeId="1" CreationDate="2016-08-23T09:41:47.550" Score="2" ViewCount="341" Body="&lt;p&gt;Elementary's &lt;a href=&quot;https://elementary.io/de/docs/human-interface-guidelines#dialogs&quot; rel=&quot;nofollow noreferrer&quot;&gt;human interface guidelines&lt;/a&gt; specify how dialogs should look:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ht8NA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ht8NA.png&quot; alt=&quot;dialogs in eos&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;a href=&quot;http://valadoc.org/#!api=gtk+-3.0/Gtk.MessageDialog&quot; rel=&quot;nofollow noreferrer&quot;&gt;Valadoc&lt;/a&gt;, there is a minimal example on how &lt;code&gt;Gtk.MessageDialog&lt;/code&gt; is to be used:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk.MessageDialog msg = new Gtk.MessageDialog (this,&#xA;                                               Gtk.DialogFlags.MODAL,&#xA;                                               Gtk.MessageType.WARNING,&#xA;                                               Gtk.ButtonsType.OK_CANCEL,&#xA;                                               &quot;My message!&quot;);&#xA;msg.show();&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, when I do this, I get a dialog which doesn't conform to the Look &amp;amp; Feel of Elementary: Its buttons are too large and particularly without spacing. Also, how do I add a color highlight to one of the buttons ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the result, which I get, though I'm using the dark theme:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MVupU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MVupU.png&quot; alt=&quot;Gtk.MessageDialog&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, the buttons are uglily &quot;stacked&quot;, i.e. the blue highlight border of the focused button is overlapped by another button on one side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt; How do I create a dialog which looks like the one in the guidelines? Is that even possible using &lt;code&gt;Gtk.MessageDialog&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="2467" LastActivityDate="2023-12-19T22:00:45.070" Title="Buttons' Look in a Gtk.MessageDialog" Tags="|gtk|development|vala|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7314" PostTypeId="1" AcceptedAnswerId="7388" CreationDate="2016-08-23T14:23:41.337" Score="1" ViewCount="712" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wFf1x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wFf1x.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;I have installed above update and after that system cannot boot. it displayed the &quot;e&quot; logo and after that everything goes black again, does anyone know how to fix this? already tried recovery mode. nothing happened. &#xA;Thanks&#xA;os: elementary OS freya&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="308" LastEditDate="2018-08-07T16:46:45.957" LastActivityDate="2018-08-07T16:46:45.957" Title="Unable to boot elementary OS after new important security and hardware support update" Tags="|release-freya|boot|updates|security|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="7315" PostTypeId="1" CreationDate="2016-08-23T14:30:36.293" Score="2" ViewCount="6192" Body="&lt;p&gt;Seems my early 2008 13' MacBook cannot be upgraded beyond its current Lion 10.7.5 and now I'm running out of browsers that support it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The MacBook has 2.4GHz Intel Core Duo, 2 GB 667 MHz DDR2 SDRAM and the graphics card is Intel GMA X3100 144 MB. I've seen some issues reported here with 'sleep' and shut down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have very little experience with Linux except as an end user and I'm certainly no UNIX guru! Would Elementary OS be a good replacement OS, please? The instructions for installation look very clear and the interface looks not unlike MacOS. Would I be able to install it alongside the current OS so as to see if it suits? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd be most grateful for some advice, please.&lt;/p&gt;&#xA;" OwnerUserId="5917" LastEditorUserId="5565" LastEditDate="2016-10-07T02:06:15.383" LastActivityDate="2016-10-07T02:06:15.383" Title="Elementary OS for early 2008 MacBook?" Tags="|system-installation|macbook|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7318" PostTypeId="2" ParentId="7314" CreationDate="2016-08-23T15:30:18.367" Score="0" Body="&lt;p&gt;The latest version of Ubuntu switched to an open-source Nvidia driver, which causes problems for some people. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may be able to solve the problem by booting into recovery mode and installing the proprietary Nvidia drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To start, we'll boot into recovery mode, enable networking, and get to a terminal prompt:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Restart your computer. If you dual boot, grub will appear. Otherwise, hold shift while your computer boots to open grub.&lt;/li&gt;&#xA;&lt;li&gt;From the options that appear in grub, choose recovery mode. The recovery mode option will look something like this: &lt;code&gt;elementary OS, with Linux [version details] (Recovery mode)&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;The system will boot into recovery mode. After a few moments, the recovery mode menu will appear.&lt;/li&gt;&#xA;&lt;li&gt;Choose &quot;enable networking&quot;. Answer &quot;yes&quot; at the dialog that appears.&lt;/li&gt;&#xA;&lt;li&gt;Choose &quot;drop to root shell prompt&quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;At this point, you should have a text prompt where you can download and install the driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, we'll install the Nvidia drivers. I don't have an Nvidia chip on my computer, so I've copied the following steps from &lt;a href=&quot;https://askubuntu.com/questions/760934/graphics-issues-after-installing-ubuntu-16-04-with-nvidia-graphics&quot;&gt;this Ask Ubuntu question&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo apt-get purge nvidia-*&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt; and then &lt;code&gt;sudo apt-get update&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo apt-get install nvidia-364&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-08-23T23:57:36.383" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="7319" PostTypeId="2" ParentId="7265" CreationDate="2016-08-23T15:40:45.780" Score="4" Body="&lt;p&gt;There is no need for these changes to be made within Freya, as the update is being delivered via the update manager. You should upgrade there, or the correct way to upgrade to the Xenial Hardware Enablement Stack via the command line like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-23T15:40:45.780" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7320" PostTypeId="2" ParentId="7315" CreationDate="2016-08-23T15:48:52.963" Score="0" Body="&lt;p&gt;The Intel Core Duo is below the &lt;a href=&quot;http://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;Recommended System Specifications&lt;/a&gt; of elementary OS. They recommend an Intel Core i3 or higher. The full specification is as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-23T15:48:52.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7321" PostTypeId="2" ParentId="7315" CreationDate="2016-08-23T17:07:40.290" Score="1" Body="&lt;p&gt;TobiW made a mistake. His computer has a Intel Core 2 Duo. Max 8gb of ram.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-aluminum-13-late-2008-unibody-specs.html&quot; rel=&quot;nofollow&quot;&gt;http://www.everymac.com/systems/apple/macbook/specs/macbook-core-2-duo-2.0-aluminum-13-late-2008-unibody-specs.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your machine will do just fine with Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you upgrade your memory at least to 4gb or more so you can install the 64bit version. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before you install Elementary, you should install rEFInd first. There are many tutorials on youtube on how to install Ubuntu or Elementary OS in a mac machine.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-23T17:07:40.290" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7322" PostTypeId="2" ParentId="7315" CreationDate="2016-08-23T18:09:08.133" Score="0" Body="&lt;p&gt;I have been running elementary 0.3.2 on an early 2008 MacBook (probably the same model you have) without any problems (you have to do some configuration work for the iSight camera though, but only once after installing) for quite some time. My impression was it was even faster than the original Mac OS 10.6.8 I was running before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So hell yeah, go ahead!! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll find instructions for dual boot e.g. here: &lt;a href=&quot;http://www.howtogeek.com/187410/how-to-install-and-dual-boot-linux-on-a-mac/?PageSpeed=noscript&quot; rel=&quot;nofollow&quot;&gt;http://www.howtogeek.com/187410/how-to-install-and-dual-boot-linux-on-a-mac/?PageSpeed=noscript&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And instructions for iSight configuration here: &lt;a href=&quot;http://smallbusiness.chron.com/use-isight-ubuntu-38894.html&quot; rel=&quot;nofollow&quot;&gt;http://smallbusiness.chron.com/use-isight-ubuntu-38894.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-08-23T18:09:08.133" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7328" PostTypeId="1" CreationDate="2016-08-25T10:46:46.987" Score="0" ViewCount="248" Body="&lt;p&gt;after doing a clean install of Elementary OS, i got the Grub boot loader.&#xA;So i thought, i get rid of the whole installation and do a full clean reinstall.&#xA;And now i have a double Grub boot loader.&#xA;On the first Grub i get the selection of &#xA;1. ubuntu&#xA;2. Drive 0: Samsung SSD drive ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On this first menu i have to select option 2 (Samsung SSD drive)&#xA;Then i get the 2nd Grub menu:&#xA;1. ubuntu&#xA;2. Drive 0: Samsung SSD drive ...&#xA;Exactly the same menu, and here if have to do ESC to boot ElementaryOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is no multiboot pc, no Windows or any other distro's, so i don't get why i end up with the Grub menu anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now the question is: how to get rid of Grub all together and boot into ElementaryOS straight away?&#xA;need to select my SSD harddrive.&lt;/p&gt;&#xA;" OwnerUserId="5941" LastActivityDate="2024-03-21T09:05:35.657" Title="Double Grub boot" Tags="|grub|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7329" PostTypeId="1" AcceptedAnswerId="7338" CreationDate="2016-08-25T11:07:03.043" Score="0" ViewCount="195" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wIzQk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wIzQk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After new important security and hardware support update, graphics are not working, it bootup until e logo but after that everything goes black but i can log in to the system using command line. Can anyone tell me how can i recover my broken system by live usb? I don't want to do fresh install because broken system has lots of application and data. please tell me how to fix the problem without loosing data.&#xA;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;HP ProBook 4540s (corei7) - 8GB ram, Radeon graphics, freya&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3505" LastEditorUserId="3505" LastEditDate="2016-08-25T11:59:06.577" LastActivityDate="2016-08-25T20:08:05.057" Title="Recover broken system using live CD" Tags="|release-freya|graphic-drivers|live-cd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7330" PostTypeId="1" CreationDate="2016-08-25T14:42:25.423" Score="0" ViewCount="307" Body="&lt;p&gt;I have the latest Intel NUC, a 6th gen Skylake model. Does elementary support this hardware?&lt;/p&gt;&#xA;" OwnerUserId="5943" LastActivityDate="2016-09-24T20:32:11.710" Title="Will 0.3 Freya install on an Intel NUC?" Tags="|release-freya|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7331" PostTypeId="2" ParentId="7307" CreationDate="2016-08-25T15:28:49.040" Score="1" Body="&lt;p&gt;With no other solution, I did a fresh install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For other users, that have to do a fresh install when running into the HWE hardware-enablement stack impass, be advised: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;don't chose the option to update while installing. I did, and it got me exactly in the same place. A stall after booting and not going to the logon screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following @Ryan-DeBeasi advice, I'm answering my own question so I can mark it as &quot;accepted&quot;. But I will have to keep looking for help on the hardware-enablement stack impass, because I'm back to square one on that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;edit&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After trying to update, with the software updater, the same thing happened all over again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's now pretty safe to say that a fresh install works, with the options to update while installing and also to install proprietary drivers turned off (for safety). After bootting for the first time all is fine and the hardware-enablement stack dialog shows up. And installing that update also works, no problem there.&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="3103" LastEditDate="2016-08-30T22:04:14.210" LastActivityDate="2016-08-30T22:04:14.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7332" PostTypeId="1" AcceptedAnswerId="7343" CreationDate="2016-08-25T17:37:59.693" Score="1" ViewCount="204" Body="&lt;p&gt;What's wrong with the file system in elementary os Freya? Hi dudes, help me with this issue please. My disk fill up quickly after not much minutes in work with logs system, specifically with kern.log and ufw.log, coming to occupy up to 50 GB of space. Please, help me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;pd. Sorry for my english, I'm Peruvian :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7i899.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7i899.png&quot; alt=&quot;my filesystem&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5945" LastActivityDate="2017-05-22T11:38:21.280" Title="Disk space fill up with kernel and firewall logs" Tags="|release-freya|elementary-website|disk-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7333" PostTypeId="1" AcceptedAnswerId="7346" CreationDate="2016-08-25T17:44:25.920" Score="0" ViewCount="1404" Body="&lt;p&gt;I have been adding a PPA but but it returns to errors as follows&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;&#xA;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;[sudo] password for maddys: &#xA;Usage: lsb_release [options]&#xA;&#xA;lsb_release: error: no such option: -u&#xA;Usage: lsb_release [options]&#xA;&#xA;lsb_release: error: no such option: -u&#xA;Usage: lsb_release [options]&#xA;&#xA;lsb_release: error: no such option: -u&#xA;Cannot add PPA: 'ppa:mpstark/elementary-tweaks-daily'.&#xA;Please check that the PPA name or format is correct.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5946" LastEditorUserId="578" LastEditDate="2016-12-29T15:13:36.827" LastActivityDate="2016-12-29T15:52:07.517" Title="How to add elementary tweaks PPA?" Tags="|ppa|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7334" PostTypeId="1" CreationDate="2016-08-25T18:57:10.693" Score="9" ViewCount="4632" Body="&lt;p&gt;This error appeared after the important Upgrade.&lt;/p&gt;&#xA;" OwnerUserId="5948" LastActivityDate="2016-10-01T10:47:24.433" Title="The Cursor Mouse disappears after Lock" Tags="|hardware|updates|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7335" PostTypeId="2" ParentId="7334" CreationDate="2016-08-25T19:16:13.180" Score="1" Body="&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&quot; rel=&quot;nofollow&quot;&gt;bug in a driver&lt;/a&gt; that was included in the update. The bug has been fixed, and the fix will be released with elementary OS Loki. (I think the fix will also come to elementary OS Luna as part of a future update to the Ubuntu base.)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-08-25T19:16:13.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7336" PostTypeId="2" ParentId="7333" CreationDate="2016-08-25T19:55:52.243" Score="0" Body="&lt;p&gt;Elementary Tweaks is dead as far as I know. They probably took the ppa down.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-25T19:55:52.243" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7337" PostTypeId="2" ParentId="7330" CreationDate="2016-08-25T20:00:47.497" Score="1" Body="&lt;p&gt;No, not 0.3.2. The Loki beta does run fine though. You can install 0.3.2, but it probably won't detect your wireless card and you will have video issues, but if you can hardwire in, you can download the hardware enablement stack, then it should work, but even with that, I was still having issues with video performance. I'm sticking with Ubuntu 16.04.1 until Loki stable is released.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how to download the Hardware Enablement kernel in 14.04 (which is what elementary 0.3.2 is based on).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu 14.04 LTS - Trusty Tahr&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The 14.04.2 and newer point releases will ship with an updated kernel and X stack by default. If you have installed with older media you can use the following to install the newer HWE kernel derived from 16.04 (Xenial):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;DESKTOP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial &lt;/p&gt;&#xA;&#xA;&lt;p&gt;MULTIARCH DESKTOP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you run a multiarch desktop (for example, i386 and amd64 on amd64, for gaming or Wine), you may find you need a slightly more involved command, like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial libgl1-mesa-glx-lts-xenial libgl1-mesa-glx-lts-xenial:i386 libglapi-mesa-lts-xenial:i386 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-25T20:00:47.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7338" PostTypeId="2" ParentId="7329" CreationDate="2016-08-25T20:08:05.057" Score="0" Body="&lt;p&gt;There are still issues with AMD/ATI Raedon graphics with Ubuntu 16.04 (whose libraries the Hardware Enablement kernel allows. See Below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Summarizing the info online: (from Phoronix)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;The last release AMD did can not be used because it is incompatible with the newer x.org version 1.18 display server. Switching distros will be of no help. X.Org Server 1.18 does bump the video ABI so that means the proprietary graphics drivers will need to see new releases... If you're using the NVIDIA Linux driver you're in good shape while AMD Catalyst users will need to wait for a new release, which could be a while considering the upstream driver still doesn't support the latest Linux 4.x kernel releases without third-party patches.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&#xA;AMD's Tim Writer commented in our forums that Ubuntu 16.04 won't be supported at all. &quot;For those who don't know, I manage AMD's open source graphics team. We (AMD) are focusing our Linux graphics driver development on the amdgpu based open source and upcoming hybrid stacks; consequently, we are not supporting fglrx on Ubuntu 16.04 LTS. Users who require Pro-graphics or Workstation class features and performance can continue to use fglrx on Ubuntu 14.04 until the hybrid stack is available later this year.&quot; &#xA;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problems with the new driver code:&#xA;&lt;a href=&quot;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=Massive-DAL-Driver-Woes112&quot; rel=&quot;nofollow&quot;&gt;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=Massive-DAL-Driver-Woes112&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.omgubuntu.co.uk/2016/03/ubuntu-drops-amd-catalyst-fglrx-driver-16-04#comment-2564386159&quot; rel=&quot;nofollow&quot;&gt;http://www.omgubuntu.co.uk/2016/03/ubuntu-drops-amd-catalyst-fglrx-driver-16-04#comment-2564386159&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As to how to recover from a Live USB, have you tried rolling back the upgraded libraries by purging the added files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get purge linux-generic-lts-xenial xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial libwayland-egl1-mesa-lts-xenial &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure if that would work to get you back to square one though, you may just have to reinstall. Hope you backed up your data! good luck.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-25T20:08:05.057" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7339" PostTypeId="2" ParentId="7299" CreationDate="2016-08-25T20:14:08.770" Score="3" Body="&lt;p&gt;You will have to reinstall. There will be no upgrade path from the beta to the stable release.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-25T20:14:08.770" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7340" PostTypeId="2" ParentId="7272" CreationDate="2016-08-25T20:18:01.440" Score="0" Body="&lt;p&gt;Try running it without connecting to the internet and without installing updates or third-party software. Then just install that stuff and connect to wifi after you boot from hardware.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-08-25T20:18:01.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7341" PostTypeId="1" CreationDate="2016-08-26T04:05:26.747" Score="2" ViewCount="976" Body="&lt;p&gt;I am attempting to install OS Luna elementary to replace my busted Windows 10 OS. However, I have encountered a very vexing problem - I am in the installation stage and cannot click anything. I can move the cursor with the trackpad, but clicking produces no results. This would not be as much of a problem if installation windows did not appear offscreen - since I cannot click on them, I cannot drag them back on screen so I can interact with them. I have attempted to plug in and use a wireless mouse, but this has the same problem: I can move the cursor, but can't click. Does anyone know what I can do to either get the click working, or to somehow move the installation windows back on screen? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="5950" LastActivityDate="2016-11-28T13:01:03.063" Title="Trying to install Elementary OS, cannot click" Tags="|system-installation|mouse|touchpad|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7342" PostTypeId="2" ParentId="1240" CreationDate="2016-08-26T04:54:36.403" Score="0" Body="&lt;p&gt;Just FYI after this bug/request was filed for Loki beta2 (or nearly-RC1): &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1616838&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1616838&lt;/a&gt; it appears to have been addressed here: &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/elementaryos/default-settings-loki/revision/207&quot; rel=&quot;nofollow&quot;&gt;http://bazaar.launchpad.net/~elementary-os/elementaryos/default-settings-loki/revision/207&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While this does seem to help with the look and feel, not sure how/if it helps with the file dialog issue, maybe that's more work.&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2016-08-26T04:54:36.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7343" PostTypeId="2" ParentId="7332" CreationDate="2016-08-26T08:01:33.703" Score="1" Body="&lt;p&gt;This is likely caused by a firewall misconfiguration (which is what &lt;code&gt;ufw&lt;/code&gt; is), which can be modified to run in low-logging mode with this simple command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw logging low&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you will probably want to clear up some space.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;1. Rotate your Logs&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /etc/cron.daily/logrotate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;2. Remove old Logs&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -Rf /var/log/*.1 /var/log/*.gz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-26T08:01:33.703" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7344" PostTypeId="1" CreationDate="2016-08-26T08:04:16.833" Score="0" ViewCount="131" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VW397.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VW397.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi everyone. I have a macbook from 2009, I downloaded and installed updates from the Software Center as usual yesterday night and after the reboot both wifi and ethernet did not work. The network worked just fine before 10pm but not after the reboot. I attach a picture I took to show the last updates installed. I think I must delete some of these updates manually using Synaptic Package Manager, I can find all of them with it, but I would like to know which ones.&lt;/p&gt;&#xA;" OwnerUserId="5951" LastActivityDate="2016-09-26T11:04:45.493" Title="I downloaded yesterday some updates from software center as usual and both wifi and ethernet do not work anymore" Tags="|software-installation|wifi|appcenter|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7346" PostTypeId="2" ParentId="7333" CreationDate="2016-08-26T08:19:58.670" Score="0" Body="&lt;p&gt;In the end I could figure out the problem. Earlier in Linux Mint I used following format to tell apt-get to use proxy authentication. But it seems to not work in eOS. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;export http_proxy=http:&quot;//username:userpass@proxy:port&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then I tried my luck my changing a little as follows by removing quotes and using slash.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;export http_proxy=&lt;a href=&quot;http://username:userpass@proxy:port/&quot; rel=&quot;nofollow&quot;&gt;http://username:userpass@proxy:port/&lt;/a&gt;&#xA;  sudo -E add-apt-repository ppa:mpstark/elementary-tweaks-daily&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5946" LastActivityDate="2016-08-26T08:19:58.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7349" PostTypeId="1" CreationDate="2016-08-26T10:53:25.703" Score="0" ViewCount="646" Body="&lt;p&gt;I want to disable the touchpad manually in the settings dialog. In freya, there was a switch to disable the touchpad. In loki it seesm this switch is not there anymore. Is there another place where I can disable the touchpad via the GUI (not using the command line)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards&lt;/p&gt;&#xA;" OwnerUserId="5957" LastActivityDate="2016-09-25T16:10:31.443" Title="How to disable touchpad in Loki beta?" Tags="|settings|touchpad|release-loki|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-09T00:32:23.190" ContentLicense="CC BY-SA 3.0" />
  <row Id="7350" PostTypeId="1" CreationDate="2016-08-26T12:57:44.760" Score="0" ViewCount="736" Body="&lt;p&gt;I've installed Loki on a new machine running dual monitors. I have an Nvidia NVS310 card, I'm using 340.96 Nvidia proprietary drivers. When I login in the morning after locking the machine the night before I login successfully but then my screen is black, I get a mouse cursor but I can't move the mouse cursor. If I leave it alone, 10-15 minutes later both screens come up normally and the machine functions fine the rest of the day.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can SSH into the machine from another machine. I can't VNC in from another machine eventhough the servce is running. The CTRL + ALT +Fx keys don't do anything. I've gone through the DMESG file and the /var/log/Xorg.0.log and nothing seems out of place. (I can attach those if anything thinks that would help.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I can think to try next is changing the Nvidia driver. Alternatively I'm going looking for other log files pertaining to Nvidia or graphics in general.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; After I switched through several nvidia drivers now I cannot log in. I'm in the same situation I was in before (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7279/i-get-logged-out-as-soon-as-i-log-in&quot;&gt;I get logged out as soon as I log in&lt;/a&gt;) but apparently &lt;em&gt;sudo nvidia-uninstall&lt;/em&gt; doesn't do anything now.&lt;/p&gt;&#xA;" OwnerUserId="573" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-30T17:49:05.150" Title="Loki - Black screen for 10-15 minutes after login" Tags="|greeter|release-loki|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7353" PostTypeId="2" ParentId="7344" CreationDate="2016-08-27T10:32:26.480" Score="1" Body="&lt;p&gt;Install both linux-firmware and linux-firmware-nonfree packages,e.g. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install linux-firmware linux-firmware-nonfree &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me Installing newer drivers solved the problem from this article or you can go through this for your specific need.&lt;a href=&quot;https://askubuntu.com/questions/235279/my-wifi-adapter-is-not-working-at-all-how-to-troubleshoot&quot;&gt;My WiFi adapter is not working at all, how to troubleshoot?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5946" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-08-27T10:32:26.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7355" PostTypeId="1" CreationDate="2016-08-27T17:46:52.247" Score="1" ViewCount="5944" Body="&lt;p&gt;Just returned to linux after few years, wireless internernet connects but damn slow even though it is not the case for my mobile phone or laptop (windows seven). Can anyone guide me to get rid of this ????&lt;/p&gt;&#xA;" OwnerUserId="5970" LastActivityDate="2017-03-05T07:04:05.157" Title="Slow wireless internet" Tags="|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7356" PostTypeId="2" ParentId="7307" CreationDate="2016-08-27T20:05:57.047" Score="2" Body="&lt;p&gt;I had the same problem and it showed a black screen after the boot logo.&#xA;But then on the black screen I pressed enter and then entered my password. Then after a while when I pressed the volume button it made the noise hence confirming that there something went wrong with the graphics driver.&#xA;So,from the Grub loader I went to the recovery mode and then to the root shell and removed the Nvidia Graphics card driver by using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge nvidia-*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After reboot I was able to get the login screen back.&#xA;There were issues with my wifi connectivity too , so I reinstalled the wifi driver by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me :)&lt;/p&gt;&#xA;" OwnerUserId="5972" LastActivityDate="2016-08-27T20:05:57.047" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7357" PostTypeId="2" ParentId="6833" CreationDate="2016-08-27T20:39:58.307" Score="2" Body="&lt;p&gt;You can use: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove *package-name*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to replace package-name with the name of the software you want to remove.&lt;/p&gt;&#xA;" OwnerUserId="5957" LastEditorUserId="10072" LastEditDate="2017-06-27T09:26:06.570" LastActivityDate="2017-06-27T09:26:06.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7358" PostTypeId="1" CreationDate="2016-08-28T10:26:11.193" Score="0" ViewCount="268" Body="&lt;p&gt;When I boot elementary OS Freya, it freezes with the pulsating logo. Pressing &quot;Esc&quot;, I see that the last line is &lt;code&gt;* Starting cups-browsed - Bonjour remote printer browsing daemon     [ OK ]&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found &lt;a href=&quot;https://askubuntu.com/questions/323598/stuck-starting-cups-browsed&quot;&gt;this thread&lt;/a&gt; of the ubuntu forums, which describes the same problem (except that they run 13.04). However, when I try to mount the elementary partition with &lt;code&gt;sudo mount /dev/mapper/nvidia_abcdefg1 /mnt&lt;/code&gt; it says that the folder &lt;code&gt;nvidia_abcdefg1&lt;/code&gt; does not exist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to mount the partition with the Files applications and then opening the folder with the terminal. After executing the commands and rebooting the computer, the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The computer is Acer TravelMate P253-E and it has another Windows 7 partition.&lt;/p&gt;&#xA;" OwnerUserId="5977" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-09-28T08:11:27.653" Title="elementary OS Freya freezes when booting" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7360" PostTypeId="2" ParentId="7334" CreationDate="2016-08-28T13:48:40.580" Score="7" Body="&lt;p&gt;A temporary solution is &lt;br&gt; - &#xA;Go to tty1 with CTRL + ALT + F1 then get back to desktop with CTRL + ALT + F7&lt;/p&gt;&#xA;" OwnerUserId="2422" LastActivityDate="2016-08-28T13:48:40.580" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7361" PostTypeId="2" ParentId="7328" CreationDate="2016-08-28T17:55:37.143" Score="0" Body="&lt;p&gt;This is really strange since it means you have two /boot partitions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you show the output of &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;fdisk -l &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;As a work around, if you do not want to try another reinstall, you can set your preferred option in both grub menus to the first place (as default option) and set the menu timeout to 0. &lt;/p&gt;&#xA;" OwnerUserId="5957" LastActivityDate="2016-08-28T17:55:37.143" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7363" PostTypeId="1" CreationDate="2016-08-28T20:36:08.537" Score="1" ViewCount="682" Body="&lt;p&gt;I'm currently on Mac OS 10.7.5, and I'm unable to use the latest Etcher release. Can I use another image burner or do you know if I can obtain an earlier release? I have not been able to find one online. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5981" LastActivityDate="2016-12-06T14:56:05.043" Title="can I use another another image burner besides etcher?" Tags="|release-freya|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7364" PostTypeId="2" ParentId="7358" CreationDate="2016-08-29T06:32:47.890" Score="1" Body="&lt;p&gt;Boot into a live environment&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a simple text file in &lt;code&gt;/etc/init&lt;/code&gt;  named &lt;code&gt;cups-browsed.override&lt;/code&gt;. In this file just write one word i.e. &lt;code&gt;manual&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow these steps to do the above:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gksudo gedit /etc/init/cups-browsed.override&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Write &lt;code&gt;manual&lt;/code&gt; in the first line and save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On booting you wont have the problem caused by this remote printing service.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-08-29T06:32:47.890" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7365" PostTypeId="2" ParentId="7341" CreationDate="2016-08-29T06:42:49.567" Score="0" Body="&lt;p&gt;Before selecting the option to boot from live USB. Press the Button &quot;e&quot; and you'll get Grub Editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find the line ending with &lt;code&gt;quiet splash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;nomodeset&lt;/code&gt; before &lt;code&gt;quiet splash&lt;/code&gt; so that now it looks like&#xA; [.....]&lt;code&gt;nomodeset quiet splash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Ctrl+x to boot now and repeat the installation.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-08-29T06:42:49.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7366" PostTypeId="2" ParentId="7246" CreationDate="2016-08-29T06:50:39.037" Score="1" Body="&lt;p&gt;For all extra animations and transition. I recommend &lt;code&gt;CompizConfig&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the terminal and type&#xA;&lt;code&gt;sudo apt-get install compizconfig-settings-manager compiz-plugins-extra&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &lt;code&gt;Effects&lt;/code&gt; from the left pane and customize to your choice.&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-08-29T06:50:39.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7367" PostTypeId="2" ParentId="7363" CreationDate="2016-08-29T08:12:02.610" Score="0" Body="&lt;p&gt;I know that old releases can be found in their repository, although they don't seem to host compiled binaries or install images. &lt;a href=&quot;https://github.com/resin-io/etcher&quot; rel=&quot;nofollow&quot;&gt;https://github.com/resin-io/etcher&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-08-29T08:12:02.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7368" PostTypeId="1" CreationDate="2016-08-29T09:42:47.233" Score="1" ViewCount="201" Body="&lt;p&gt;When my close my laptop it goes into suspend mode.&#xA;After opening my laptop my screen stays black. I have to shut my laptop down, turn it on again and when I log in then my desktop does not boot. I have to restart it gracefully, after that it works again. How can I diagnose the issue? It seems to be an issue with pantheon-greeter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've managed to workaround this by changing the behaviour to sleep mode for now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i3 4030u&#xA;HD4000&lt;/p&gt;&#xA;" OwnerUserId="5979" LastActivityDate="2016-09-29T13:56:31.853" Title="Loki Beta2: laptop suspend issue" Tags="|suspend|pantheon|" AnswerCount="0" CommentCount="2" ClosedDate="2016-10-09T00:22:11.323" ContentLicense="CC BY-SA 3.0" />
  <row Id="7369" PostTypeId="2" ParentId="7341" CreationDate="2016-08-29T11:12:59.483" Score="1" Body="&lt;p&gt;It might not help you in your specific situation with an installation about to bust. But for an installation of a new operating system I would never use devices such as trackpads or a wireless mouse as you never know if and how they are supported, i.e. drivers are provided. Just connect a regular keyboard and mouse, get everything running and then look for additional drivers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are going to REPLACE Win10 why dont you just cancel the installation and start from the beginning even if the existing Win10 installation might already been corrupted. Take either a Live CD or - in case you do not have an optical drive - create a bootable USB-stick and boot from the PC from the respective medium. With elementary OS running from the CD (or USB medium) check everything (screen output, keyboard, mouse, network connection, ..). If your trackpad or whatever other device works here it should do so during and after installation as well. If everything works fine AND if you are not heading for an installation parallel to another OS AND if you are not familiar with setting up partitions etc. just let the installer on the live CD do the installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And a final point: &quot;Luna&quot; is an old version of elementary OS. &lt;s&gt;&quot;Freya&quot;&lt;/s&gt; &quot;Loki&quot; is the latest version. There is no upgrade from Luna to Loki. The latter needs a fresh install. What could be a reason not to install the latest version? &lt;/p&gt;&#xA;" OwnerUserId="5876" LastEditorUserId="9" LastEditDate="2016-09-28T15:10:42.410" LastActivityDate="2016-09-28T15:10:42.410" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7370" PostTypeId="1" CreationDate="2016-08-29T18:51:25.910" Score="0" ViewCount="135" Body="&lt;p&gt;I recently installed the new hardware enablement stack including kernel 4.4.0-34. Today the update manager told me there was a kernel update available - to kernel version 3.19.0.68.50.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't &quot;upgraded&quot; yet because I'm wondering if this is a bug. Any thoughts??&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-30T13:42:39.143" Title="Kernel &quot;update&quot; to 3.19.0.68.50 after upgrading to 4.4.0-34?" Tags="|release-freya|kernel|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7371" PostTypeId="1" CreationDate="2016-08-29T19:50:49.837" Score="0" ViewCount="1624" Body="&lt;p&gt;I've been searching around on here and haven't located an answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OS install went well, but I have no wireless connections available. My machine is a Dell XPS 12 9250. It is running an Intel chip set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone point me in the right direction please?&lt;/p&gt;&#xA;" OwnerUserId="5991" LastEditorUserId="5565" LastEditDate="2016-10-09T01:19:55.020" LastActivityDate="2020-04-19T19:38:29.327" Title="Dell XPS Wi-Fi drivers" Tags="|wifi|drivers|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7375" PostTypeId="2" ParentId="3122" CreationDate="2016-08-29T21:25:50.613" Score="1" Body="&lt;p&gt;Try loading the driver&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo modprobe -v ath9k&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and then restart the wireless network&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo service network-manager restart&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If restarting the network manager didn't work, try rebooting the machine.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-08-29T21:25:50.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7376" PostTypeId="2" ParentId="5458" CreationDate="2016-08-29T21:28:54.427" Score="1" Body="&lt;p&gt;Try reloading the driver by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -v ath9k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="26" LastEditDate="2016-09-24T20:42:50.530" LastActivityDate="2016-09-24T20:42:50.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7377" PostTypeId="1" CreationDate="2016-08-30T03:55:03.137" Score="0" ViewCount="200" Body="&lt;p&gt;Let me try and explain the situation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used dual-boot with Ubuntu 14/16 and Elementary OS. However, I want to get rid of Ubuntu and either:&#xA;1) Install some other distro and try it out, or&#xA;2) Preferably, capture/merge the partition space into Elementary OS, so that my Elementary has more space&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Gparted and tried few things but It was a close call. So approaching the forum to find a safe way to add this additional space to the Elementary (and make it the primary and only OS in the system)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can somebody help/guide in how to do it? Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="5994" LastEditorUserId="26" LastEditDate="2016-09-25T16:55:48.347" LastActivityDate="2016-09-25T16:55:48.347" Title="How to recover / merge partions into Elementary OS?" Tags="|dual-boot|disk-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7378" PostTypeId="2" ParentId="3321" CreationDate="2016-08-30T08:48:13.217" Score="2" Body="&lt;p&gt;Removing the shotwell cache amounts to lose your database. In order to change the schema of your database:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make a copy of the database,&lt;/li&gt;&#xA;&lt;li&gt;Do echo &quot;update versiontable set schema_version=20;&quot; | sqlite3 ~/.local/share/shotwell/data/photo.db&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I used this to move back from pantheon-photos to shotwell, when I got this error message from Shotwell:&#xA;&quot;Your photo library is not compatible with this version of Shotwell. It appears it was created by Shotwell 0.1.1 (schema 21). This version is 0.23.5 (schema 20). Please use the latest version of Shotwell.&quot;&lt;/p&gt;&#xA;" OwnerUserId="5997" LastActivityDate="2016-08-30T08:48:13.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7379" PostTypeId="2" ParentId="7377" CreationDate="2016-08-30T08:53:08.040" Score="1" Body="&lt;p&gt;To use full functionality of Gparted you need to start it not from your OS. For example, in situations like yours I use Live-USB with Elementary.&#xA;So, you run Gparted from Live-USB (or DVD, it's not important) and will see smth like it:&lt;a href=&quot;https://i.stack.imgur.com/6sp1F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6sp1F.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You choose partition with Ubuntu (Windows in my case) and click &amp;quot;Change size/move&amp;quot; (not exact translation because I use Gparted in Russian).Or, if you want to merge your Ubuntu partition, you need to delete Ubuntu partition and change the size of Elementary partition after that.&lt;a href=&quot;https://i.stack.imgur.com/mv7Mo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mv7Mo.png&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;In that dialog you can change your partition size by changing &amp;quot;size&amp;quot;, &amp;quot;free space before&amp;quot; and &amp;quot;free space after&amp;quot; colums.&lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-08-30T08:53:08.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7380" PostTypeId="2" ParentId="7363" CreationDate="2016-08-30T12:21:57.340" Score="2" Body="&lt;p&gt;On OS X there is disk utility to burn cd/dvd/usb sticks or &lt;a href=&quot;http://osxdaily.com/2012/03/13/burn-an-iso-image-from-the-command-line/&quot; rel=&quot;nofollow&quot;&gt;terminal command dd&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1121" LastActivityDate="2016-08-30T12:21:57.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7381" PostTypeId="2" ParentId="7299" CreationDate="2016-08-30T12:48:23.190" Score="0" Body="&lt;p&gt;Reinstall&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because config might be slightly different. Also the beta uses other sources than the stable release.&lt;/p&gt;&#xA;" OwnerUserId="1121" LastActivityDate="2016-08-30T12:48:23.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7384" PostTypeId="1" AcceptedAnswerId="7385" CreationDate="2016-08-31T08:31:30.700" Score="1" ViewCount="635" Body="&lt;p&gt;First of all I'm not familiar with Linux products, but I'm interested and wanted to try elementary due to fact it looks simple and no additional apps are required after installation - it is like out of the box solution for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did follow the instllation instructions provided on elementary website:&#xA;- downloaded rufus&#xA;- downloaded elementary and checked .iso&#xA;- created bootable USB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next step was to boot from USB and I had to choose what to do:&#xA;On screen there was 4 options to choose, main two were TRY elemntary and INSTALL elementary. So I did choose TRY.&#xA;And here comes the problem. Elementary &quot;e&quot; pulsing logo appeared and...nothing happened. I left my laptop for around 30 mins and still nothing.&#xA;I did try the same method with ubuntu and same as before &quot;ubuntu&quot; logo appeared and nothing more...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues what to do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer is ASUS GL552VW with Win10 installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="6006" LastActivityDate="2016-08-31T10:22:34.867" Title="Trying ElementaryOS - boot from USB" Tags="|boot|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7385" PostTypeId="2" ParentId="7384" CreationDate="2016-08-31T10:22:34.867" Score="1" Body="&lt;p&gt;Your laptop has a 6th gen intel processor, kaby lake architecture.&#xA;the current elementary OS freya 0.3.2 has kernel 3.x i don't know the specific one out of my head.(feel free to add comment) this processor has no drivers in this linux kernel version. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki uses linux kernel 4.4 or 4.0.4 something like that. as far as i can find support in 4.0.4 and 4.4 is &lt;strong&gt;not&lt;/strong&gt; present.&#xA;what i can find is in 4.5 or higher has intel kaby lake support. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;what you can do is compile your own kernel pick current RC release.&#xA;but due to the post you wrote, i assume you are not a developer or technical capable (correct me if i am wrong) to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing you can do is wait for elementary is using an kernel version that has kaby lake support. Maybe loki will get a new hardware stack (update). Depending on the kernel update would be loki or the release after loki, that the asus is able to run elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that it is loading the boot logo means the kernel is busy trying to start up.&#xA;There are ways to look at the output. read this post how to do so &lt;a href=&quot;https://askubuntu.com/questions/25022/how-to-enable-boot-messages-to-be-printed-on-screen-during-boot-up&quot;&gt;https://askubuntu.com/questions/25022/how-to-enable-boot-messages-to-be-printed-on-screen-during-boot-up&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in these logs you can see what is going wrong.&lt;/p&gt;&#xA;" OwnerUserId="94" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-08-31T10:22:34.867" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7386" PostTypeId="2" ParentId="7370" CreationDate="2016-08-31T13:28:05.483" Score="1" Body="&lt;p&gt;A few minutes ago I got 4.4.0-36 update. Looks like that the update manager try to update both versions without checking whats  really running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Deesnook, in the update manager it shows under technical description which version will be updated to the new one. Which old version was it in your case?&lt;/p&gt;&#xA;" OwnerUserId="5126" LastActivityDate="2016-08-31T13:28:05.483" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7388" PostTypeId="2" ParentId="7314" CreationDate="2016-08-31T15:26:20.300" Score="1" Body="&lt;p&gt;Finally i have to do a fresh install.  don't know what will happen when i  upgrade to the Loki. I know this is not the best solution. but i mark this as &quot;accepted&quot;. if anyone know how to ignore unsupported updates feel free to comment below. it maybe a proactive solution for this. &lt;/p&gt;&#xA;" OwnerUserId="3505" LastActivityDate="2016-08-31T15:26:20.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7389" PostTypeId="1" CreationDate="2016-08-31T16:26:03.733" Score="2" ViewCount="157" Body="&lt;p&gt;I'd like to get the kernel sources related to my installed image. Currently I have the version 3.19.0-39 installed into my VM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to get the sources, I searched into cache using &lt;code&gt;apt-cache search linux-source&lt;/code&gt; and got info for 3.13.0 - Linux kernel source for version 3.13.0 with Ubuntu patches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the sources related to 3.19.0-39?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="6011" LastEditorUserId="16827" LastEditDate="2019-02-04T16:08:26.987" LastActivityDate="2019-02-04T16:08:26.987" Title="How to get a specific kernel sources?" Tags="|kernel|development|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7391" PostTypeId="2" ParentId="7350" CreationDate="2016-08-31T17:22:09.557" Score="2" Body="&lt;p&gt;After several attempts of completely wiping the suite of pre-installed Nvidia drivers and attempting to install new ones off the website I cut my losses and reinstalled. After I reinstalled &lt;strong&gt;I did not attempt to update to any Nvidia drivers this install.&lt;/strong&gt; I'm just using the default nouveau drivers and haven't had any graphical issues.&lt;/p&gt;&#xA;" OwnerUserId="573" LastActivityDate="2016-08-31T17:22:09.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7392" PostTypeId="1" CreationDate="2016-08-31T23:14:21.307" Score="0" ViewCount="1585" Body="&lt;p&gt;How to add my Magic Mouse and Wireless Keyboard to OS? In Device Search doesn't recognize any of device.&lt;/p&gt;&#xA;" OwnerDisplayName="user6017" LastActivityDate="2020-12-03T11:05:25.517" Title="I can't pair my Apple Mouse and Keyboard" Tags="|keyboard|mouse|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7394" PostTypeId="2" ParentId="7371" CreationDate="2016-09-01T04:28:23.367" Score="2" Body="&lt;p&gt;So after doing some research. It seems you need to upgrade the &lt;strong&gt;linux-firmware&lt;/strong&gt; and the kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Connect your machine to a LAN network and run the Update Manager to get the newest upgrades, or simply just upgrade these packages.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial&#xA;  xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial&#xA;  xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial&#xA;  libwayland-egl1-mesa-lts-xenial&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then download the newest &lt;strong&gt;linux-firmware&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.157_all.deb&quot; rel=&quot;nofollow&quot;&gt;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.157_all.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the package and restart Elementary. Hopefully that should work.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-01T04:28:23.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7395" PostTypeId="1" CreationDate="2016-09-01T05:17:38.077" Score="1" ViewCount="26" Body="&lt;p&gt;Hi I just installed  elementary OS the stable version today I found 2  application that I can't remove Chromebook utility recovery and hangout ... How can removed from my system .. also the touch pad is no responding when I tap on it I'm using a Lenovo 100s 80R9&lt;/p&gt;&#xA;" OwnerUserId="6019" LastActivityDate="2016-09-01T05:17:38.077" Title="How to remove Chromebook utility recovery" Tags="|applications|drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7398" PostTypeId="1" CreationDate="2016-09-01T10:47:38.897" Score="0" ViewCount="1957" Body="&lt;p&gt;I am a noob at linux so don't be harsh please. I installed Elementary OS on my Dell Inspiron 7559 and the install was fine but, wifi networks don't show up and ethernet works perfectly fine. Can someone help me out please.&lt;/p&gt;&#xA;" OwnerUserId="6022" LastActivityDate="2016-09-01T13:42:49.190" Title="Wifi Problem With Elementary OS" Tags="|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7399" PostTypeId="1" AcceptedAnswerId="7405" CreationDate="2016-09-01T11:02:45.397" Score="0" ViewCount="1701" Body="&lt;p&gt;On my Elementary Loki installation there is no option to add a google account in the switchboard-onlineaccounts plug. If i remember correctly, this was possible in Freya. Is this feature removed? or am i missing packages?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="2597" LastActivityDate="2016-09-01T14:04:49.297" Title="Add Google Account to Elementary Loki" Tags="|settings|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-30T18:26:39.483" ContentLicense="CC BY-SA 3.0" />
  <row Id="7400" PostTypeId="2" ParentId="7398" CreationDate="2016-09-01T11:21:22.290" Score="0" Body="&lt;p&gt;I had the same problem with every Linux distribution on my Asus X552 and the only solution I found is to put laptop on sleep and then turn it on again and wifi will work.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-09-01T11:21:22.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7403" PostTypeId="2" ParentId="7398" CreationDate="2016-09-01T13:42:49.190" Score="1" Body="&lt;p&gt;Your wireless card is not supported by the 3.19 kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To upgrade the kernel, run this command&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial&#xA;  xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial&#xA;  xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial&#xA;  libwayland-egl1-mesa-lts-xenial&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Reboot your computer and try connecting to the Wifi.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-01T13:42:49.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7404" PostTypeId="1" CreationDate="2016-09-01T13:47:51.847" Score="0" ViewCount="1283" Body="&lt;p&gt;I've been getting an error when I try to run sudo apt-get upgrade. Can you help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;:~$ sudo apt-get upgrade  Reading package lists... Done   Building&#xA;  dependency tree          Reading state information... Done&lt;br&gt;&#xA;  Calculating upgrade... Done   0 upgraded, 0 newly installed, 0 to&#xA;  remove and 0 not upgraded.   3 not fully installed or removed.   After&#xA;  this operation, 0 B of additional disk space will be used.   Do you&#xA;  want to continue? [Y/n] y   Setting up&#xA;  linux-image-extra-4.4.0-36-generic (4.4.0-36.55~14.04.1) ...&lt;br&gt;&#xA;  run-parts: executing /etc/kernel/postinst.d/apt-auto-removal&#xA;  4.4.0-36-generic /boot/vmlinuz-4.4.0-36-generic   run-parts: executing /etc/kernel/postinst.d/dkms 4.4.0-36-generic&#xA;  /boot/vmlinuz-4.4.0-36-generic   ERROR (dkms apport): kernel package&#xA;  linux-headers-4.4.0-36-generic is not supported   Error! Bad return&#xA;  status for module build on kernel: 4.4.0-36-generic (i686) Consult&#xA;  /var/lib/dkms/bcmwl/6.30.223.248+bdcom/build/make.log for more&#xA;  information.   run-parts: executing&#xA;  /etc/kernel/postinst.d/initramfs-tools 4.4.0-36-generic&#xA;  /boot/vmlinuz-4.4.0-36-generic   update-initramfs: Generating&#xA;  /boot/initrd.img-4.4.0-36-generic&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;gzip: stdout: No space left on device   E: mkinitramfs failure cpio&#xA;  141 gzip 1   update-initramfs: failed for&#xA;  /boot/initrd.img-4.4.0-36-generic with 1.   run-parts:&#xA;  /etc/kernel/postinst.d/initramfs-tools exited with return code 1&lt;br&gt;&#xA;  dpkg: error processing package linux-image-extra-4.4.0-36-generic&#xA;  (--configure):    subprocess installed post-installation script&#xA;  returned error exit status 1 dpkg: dependency problems prevent&#xA;  configuration of linux-image-generic-lts-xenial:&lt;br&gt;&#xA;  linux-image-generic-lts-xenial depends on&#xA;  linux-image-extra-4.4.0-36-generic; however:   Package&#xA;  linux-image-extra-4.4.0-36-generic is not configured yet.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;dpkg: error processing package linux-image-generic-lts-xenial&#xA;  (--configure):  dependency problems - leaving unconfigured dpkg:&#xA;  dependency problems prevent configuration of linux-generic-lts-xenial:&#xA;  linux-generic-lts-xenial depends on linux-image-generic-lts-xenial (=&#xA;  4.4.0.36.26); however:   Package linux-image-generic-lts-xenial is not configured yet.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;dpkg: error processing package linux-generic-lts-xenial (--configure):&#xA;  dependency problems - leaving unconfigured No apport report written&#xA;  because the error message indicates its a followup error from a&#xA;  previous failure.&#xA;                                                                                                            No apport report written because the error message indicates its a&#xA;  followup error from a previous failure.&#xA;                                             Errors were encountered while processing:  linux-image-extra-4.4.0-36-generic &#xA;  linux-image-generic-lts-xenial  linux-generic-lts-xenial E:&#xA;  Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="6024" LastActivityDate="2016-10-01T17:11:01.103" Title="sudo apt-get upgrade error E: Sub-process /usr/bin/dpkg returned an error code (1)" Tags="|pantheon-terminal|kernel|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7405" PostTypeId="2" ParentId="7399" CreationDate="2016-09-01T14:04:49.297" Score="0" Body="&lt;p&gt;Switchboard-onlineaccounts didn't make it into the stable version of Freya. An incomplete version of this plug was in the Freya beta but was &lt;a href=&quot;https://answers.launchpad.net/switchboard/+question/265013&quot; rel=&quot;nofollow&quot;&gt;removed&lt;/a&gt; before the stable release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki beta 2 (the latest version as of this writing) has known bugs and may be missing features. It's possible that the &lt;a href=&quot;https://launchpad.net/switchboard-plug-onlineaccounts/+announcement/14102&quot; rel=&quot;nofollow&quot;&gt;new version of the plug&lt;/a&gt;, which was released after Beta 2 and will probably ship with RC1, may fix this problem.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-01T14:04:49.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7406" PostTypeId="2" ParentId="7315" CreationDate="2016-09-01T16:39:23.040" Score="0" Body="&lt;p&gt;I have a late 2007 Macbook, which sounds similar to yours. I downloaded the ElementaryOS, while running Lion on the Macbook. In terminal, I used teh dd command to write the iso as a bootable disk on a 4gb usb drive. When finished, OSX said the drive was unreadable, but after ejecting the usb, and rebooting, holding down the option (alt) key, the usb showed up as an efi boot disk. After selecting that to boot, I was given the choice to try without installing or install. I tried it as a live usb to confirmed it worked, then replaced the Lion hd with a blank drive, and installed Elementary as the only OS. It works. I wouldn't say it is better than OSX, but as Apple no longer supports Lion or the old Macbook, it is  good choice. &lt;/p&gt;&#xA;" OwnerUserId="6025" LastActivityDate="2016-09-01T16:39:23.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7407" PostTypeId="2" ParentId="7404" CreationDate="2016-09-01T16:44:38.133" Score="1" Body="&lt;p&gt;So I found&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -l linux-* | awk '/^ii/{ print $2}' | grep -v -e `uname -r | cut -f1,2 -d&quot;-&quot;` | grep -e [0-9] | xargs sudo apt-get -y purge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Works to remove all but the current version of the kernel and one backup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the solution at the Ubuntu Stackexchange &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2262158&amp;amp;highlight=purge%20unused%20kernels&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm unhappy with how broad, sudden and irreversible the changes are, but no system of manual removal of specific kernel versions seemed to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This has tentatively provided a fix. I'll try keeping this updated if I encounter new problems.&lt;/p&gt;&#xA;" OwnerUserId="6024" LastActivityDate="2016-09-01T16:44:38.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7408" PostTypeId="2" ParentId="3712" CreationDate="2016-09-01T18:21:26.550" Score="1" Body="&lt;p&gt;Just in case someone else is looking for this I followed the second step on this article &lt;a href=&quot;http://www.webupd8.org/2011/05/how-to-remove-maximized-windows.html&quot; rel=&quot;nofollow&quot;&gt;How To Remove Maximized Windows Titlebar In GNOME Shell&lt;/a&gt; and it worked perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;even though it says that this only applies for Adwaita theme I was able to find the same files and xml structure on the Elementary theme&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The below instructions are for Adwaita theme but you can of course do this for other themes and will only remove the titlebar for maximized windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove maximized windows titlebar in GNOME Shell, open &quot;/usr/share/themes/Adwaita/metacity-1/metacity-theme-3.xml&quot; (firstly make a backup of this file!) as root and search for frame_geometry name=&quot;max&quot; and edit it so that it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;frame_geometry name=&quot;max&quot; has_title=&quot;false&quot; title_scale=&quot;medium&quot; parent=&quot;normal&quot; rounded_top_left=&quot;false&quot; rounded_top_right=&quot;false&quot;&amp;gt;&#xA;         &amp;lt;distance name=&quot;left_width&quot; value=&quot;0&quot; /&amp;gt;&#xA;         &amp;lt;distance name=&quot;right_width&quot; value=&quot;0&quot; /&amp;gt;&#xA;         &amp;lt;distance name=&quot;left_titlebar_edge&quot; value=&quot;0&quot;/&amp;gt;&#xA;         &amp;lt;distance name=&quot;right_titlebar_edge&quot; value=&quot;0&quot;/&amp;gt;&#xA;         &amp;lt;distance name=&quot;title_vertical_pad&quot; value=&quot;0&quot;/&amp;gt;&#xA;         &amp;lt;border name=&quot;title_border&quot; left=&quot;0&quot; right=&quot;0&quot; top=&quot;0&quot; bottom=&quot;0&quot;/&amp;gt;&#xA;         &amp;lt;border name=&quot;button_border&quot; left=&quot;0&quot; right=&quot;0&quot; top=&quot;0&quot; bottom=&quot;0&quot;/&amp;gt;&#xA;         &amp;lt;distance name=&quot;bottom_height&quot; value=&quot;0&quot; /&amp;gt;&#xA;&amp;lt;/frame_geometry&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Basically you need to change all the &quot;distance&quot; and &quot;border&quot; values for frame_geometry name=&quot;max&quot; to 0 and append has_title=&quot;false&quot; to the frame_geometry name=&quot;max&quot; line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then press ALT + F2 to reload GNOME Shell and you're done.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If alt + F2 doesn't restart your shell, just reboot your computer&lt;/p&gt;&#xA;" OwnerUserId="6026" LastActivityDate="2016-09-01T18:21:26.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7409" PostTypeId="1" CreationDate="2016-09-01T23:00:08.603" Score="0" ViewCount="243" Body="&lt;p&gt;Today (02.09.16) I was updating the available security package on my computer when its battery died. Yes I know that all updates should be done with computer connected but I simply forgot and the system did not emit its usual low battery warning.&#xA;The computer turned off whilst the install of the security package was occurring.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The thing is that when I turn the computer on it doesn't seem to be able to operate elementary. I say this because it does its start up procedure, &quot;display the manufacturer logo and the screen with the white characters&quot;, I believe this is the BIOS. But once this is complete the screen simply goes to black and remains as such forever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not have much computer knowledge but do enjoy elementary very much. The computer has important files which I need. &lt;/p&gt;&#xA;" OwnerUserId="6030" LastEditorDisplayName="user212" LastEditDate="2016-10-12T13:12:11.587" LastActivityDate="2019-05-03T13:01:50.677" Title="Computer doesn't get past BIOS start, screen goes black" Tags="|boot|updates|system|power|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7410" PostTypeId="1" CreationDate="2016-09-02T05:18:03.997" Score="1" ViewCount="563" Body="&lt;p&gt;I am having an issue where since doing some recent updates, not sure which, when I come back after a while and my laptop comes back from standby I can no longer see my cursor. It is still there and I can see when i move it that its moving around its just invisible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a 2013 Macbook Air running latest Elementry install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any tips to fix this permanently?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&#xA;C &lt;/p&gt;&#xA;" OwnerUserId="6032" LastActivityDate="2016-09-27T19:57:37.480" Title="Missing Cursor after standby" Tags="|release-freya|mouse|drivers|" AnswerCount="3" CommentCount="0" ClosedDate="2016-10-02T14:28:58.190" ContentLicense="CC BY-SA 3.0" />
  <row Id="7411" PostTypeId="2" ParentId="7067" CreationDate="2016-09-02T07:12:26.157" Score="4" Body="&lt;p&gt;This is a known issue as you can see &lt;a href=&quot;https://github.com/adobe/brackets/issues/12380&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://github.com/adobe/brackets/issues/10255&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&#xA;The proposed solution is to install &lt;a href=&quot;https://launchpadlibrarian.net/201289896/libgcrypt11_1.5.3-2ubuntu4.2_amd64.deb&quot; rel=&quot;nofollow&quot;&gt;this version of libgcrypt11&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="596" LastEditorUserId="596" LastEditDate="2016-09-02T07:19:36.333" LastActivityDate="2016-09-02T07:19:36.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7412" PostTypeId="2" ParentId="7410" CreationDate="2016-09-02T08:02:22.397" Score="1" Body="&lt;p&gt;This is the same with my problem, my laptop is Dell Vostro 1440, when i press WIN + L (lock the computer), after that when i login the cursor will disappear.&#xA;I look for this problem and this is the way to fix it but when i logout and login again, i will have the missing cursor again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.cursor active false&#xA;gsettings set org.gnome.settings-daemon.plugins.cursor active true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6033" LastActivityDate="2016-09-02T08:02:22.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7413" PostTypeId="1" AcceptedAnswerId="7423" CreationDate="2016-09-02T09:28:40.283" Score="3" ViewCount="1577" Body="&lt;p&gt;I've got here a notebook running elementary OS. There's been an update some days ago that apparently disabled its WIFI completely - it doesn't show any networks and I can't connect to anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already done the procedure described &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4178/warning-three-libnl-v-3-2-21-1ubuntu1-update-from-january-29th-broke-my-netwo&quot;&gt;here&lt;/a&gt;, downgraded the packages libnl-3-200, libnl-genl-3-200 and libnl-route-3-200 and restarted. Yet it still won't work, it seems like something else causes the problem. I can get a connection via cable but this cannot be a permanent solution. Any clues?&lt;/p&gt;&#xA;" OwnerUserId="6034" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2024-03-18T12:35:54.690" Title="No WIFI access after update" Tags="|wifi|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7414" PostTypeId="2" ParentId="7410" CreationDate="2016-09-02T10:06:32.927" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this bug'll be fixed in loki RC1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A quicker workaround is ctrl+alt+f1 and ctrl+alt+f7&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2016-09-02T10:06:32.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7416" PostTypeId="1" CreationDate="2016-09-02T15:02:54.413" Score="1" ViewCount="104" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6iMJp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6iMJp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;Hello, I seem to be having trouble with opening Software Center, when I click on it nothing happens, I'm new to elementary OS and Linux. I think I did something wrong when I tried to update a repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get a lot of &quot;&lt;strong&gt;404 Not Found&lt;/strong&gt;&quot; when I run &quot;&lt;em&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/em&gt;&quot;, it ends with &quot;&lt;em&gt;E: Some index files failed to download. They have been ignored, or old ones used instead.&lt;/em&gt;&quot;&lt;/p&gt;&#xA;" OwnerUserId="6035" LastEditorUserId="5565" LastEditDate="2016-10-07T02:04:59.520" LastActivityDate="2016-10-07T02:04:59.520" Title="Can't open Software Center / 404 Not Found with apt-get update" Tags="|updates|apt|appcenter|" AnswerCount="0" CommentCount="0" ClosedDate="2019-04-18T14:50:45.520" ContentLicense="CC BY-SA 3.0" />
  <row Id="7417" PostTypeId="1" AcceptedAnswerId="9130" CreationDate="2016-09-02T17:06:55.330" Score="6" ViewCount="304" Body="&lt;p&gt;Can I, for example, replace workspace 1 by workspace 3 in the multitasking view?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2018-08-04T21:57:21.043" Title="How to change an order of workspaces?" Tags="|desktop|workspace|show-desktop|multitasking-view|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7418" PostTypeId="1" CreationDate="2016-09-02T17:14:23.507" Score="1" ViewCount="439" Body="&lt;p&gt;i bad speak english , please help , i install elementary os and resolution is very very big , how to fix ? &#xA;My monitor is a TV LG conected to pc in HDMI &#xA;&lt;a href=&quot;https://i.stack.imgur.com/tN1ao.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tN1ao.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XbKfH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XbKfH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6038" LastActivityDate="2016-09-03T17:04:48.037" Title="Resolution is very big" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7419" PostTypeId="1" CreationDate="2016-09-02T23:31:49.987" Score="5" ViewCount="5289" Body="&lt;p&gt;What would it take to create an unofficial 32-bit version of Loki?&lt;br&gt;&#xA;What would be the steps required to build it from the source?&lt;br&gt;&#xA;What would be missing or non-functional?&lt;br&gt;&#xA;If someone provided an ISO, would it be made available on the website?&lt;/p&gt;&#xA;" OwnerUserId="6042" LastEditorUserId="26" LastEditDate="2016-12-10T22:13:08.477" LastActivityDate="2016-12-10T22:13:08.477" Title="Can I make a Loki 32-bit version?" Tags="|release-loki|cpu|sources|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7420" PostTypeId="1" CreationDate="2016-09-03T02:01:04.573" Score="2" ViewCount="576" Body="&lt;p&gt;Why can't I find Firefox in the AppCenter?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cPVV2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cPVV2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not only Firefox, but also other non-elementary Apps.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-09-03T07:55:53.923" LastActivityDate="2016-09-05T21:55:04.843" Title="I can't find FireFox in the AppCenter of Loki, although I have installed it" Tags="|release-loki|appcenter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7421" PostTypeId="1" CreationDate="2016-09-03T05:05:37.623" Score="0" ViewCount="202" Body="&lt;p&gt;In Freya, I often mount server file systems through the &quot;Connect To A Server&quot; dialog. I almost always use SSH for this, which has the default port number of 22 of course. I do not use standard ports, so I would like to change this number that appears by default. I'm sure there is a conf file somewhere that would be simple enough to edit with a simple word search. Anyone have any knowledge on this?&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2016-10-02T10:17:24.853" Title="Change Pantheon-Files Connect to server SSH port number" Tags="|release-freya|pantheon-files|" AnswerCount="1" CommentCount="4" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7422" PostTypeId="2" ParentId="7418" CreationDate="2016-09-03T06:03:20.317" Score="2" Body="&lt;p&gt;Try setting your &lt;code&gt;scaling-factor&lt;/code&gt; to 1. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 1&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-09-03T06:03:20.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7423" PostTypeId="2" ParentId="7413" CreationDate="2016-09-03T07:28:43.853" Score="3" Body="&lt;p&gt;I fixed it: wifi adapter is a Broadcom BCM4313. First I disabled it in Software Center -&gt; Edit -&gt; Software Sources -&gt; Additional Drivers. Then I used &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to get rid of the driver. And &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install b43-fwcutter firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to install a new one. After a reboot it worked again.&lt;/p&gt;&#xA;" OwnerUserId="6034" LastActivityDate="2016-09-03T07:28:43.853" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7425" PostTypeId="1" CreationDate="2016-09-03T10:09:22.873" Score="3" ViewCount="82" Body="&lt;p&gt;I switch frequently between elementary OS and OSX, and it is really hard dealing with shortcuts like: cut, copy, paste, new, new tab, close window, close all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, basically I am asking the exact same question with this ubuntu thread:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/10008/how-to-make-keyboard-work-like-osx-system-wide&quot;&gt;https://askubuntu.com/questions/10008/how-to-make-keyboard-work-like-osx-system-wide&lt;/a&gt;&#xA;(I even kept the same title.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to do it using:&#xA;Settings-&gt;Keyboard-&gt;Shortcuts-&gt;Custom ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried using &lt;code&gt;autokey-gtk&lt;/code&gt; with no luck, after adapting &lt;a href=&quot;https://github.com/metakermit/dotfiles/tree/master/autokey&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; repository folder from &lt;a href=&quot;https://askubuntu.com/a/319896/34777&quot;&gt;this&lt;/a&gt; answer.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Note:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Swapping command with control it is not a solution.&lt;/p&gt;&#xA;" OwnerUserId="5835" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-03T10:09:22.873" Title="How to make keyboard work like OSX System Wide?" Tags="|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-16T11:01:41.183" ContentLicense="CC BY-SA 3.0" />
  <row Id="7426" PostTypeId="2" ParentId="7208" CreationDate="2016-09-03T11:23:00.620" Score="0" Body="&lt;p&gt;Usually when you do a reinstall and have your home folder on a separate partition, all the settings (at least so far as I can tell) are kept, so that wouldn't be the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm pretty sure that even with a clean reinstall, you'll be stuck with an encrypted home folder. If I remember correctly, during the installation routine the encryption option will be greyed out, at least if you have just an encrypted home folder. I also tried to change the encryption password once, but it didn't work. But you might have to try it out since I'm not entirely sure&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-03T11:23:00.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7427" PostTypeId="1" AcceptedAnswerId="17994" CreationDate="2016-09-03T11:40:57.520" Score="2" ViewCount="79" Body="&lt;p&gt;I am working on an ebook application with WebKit 3 (webkitgtk-3.0) on Elementaty OS Freya. epubs which have html display fine, however the new epub 3 with XHTML comes garbled with multi columns instead of paragraphs. I have attached screen shots of both. changing the mime type to &quot;application/xhtml+xml&quot; also does not resolve the XHTML content. Code at launchpad &lt;a href=&quot;https://i.stack.imgur.com/z5mRM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/z5mRM.png&quot; alt=&quot;here&quot;&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate any guidance on how to fix this.&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2019-01-21T10:05:47.700" Title="XHTML with WebKit" Tags="|gtk|vala|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7428" PostTypeId="1" CreationDate="2016-09-03T12:19:36.000" Score="1" ViewCount="123" Body="&lt;p&gt;I'm trying desperately to install Nuvola Player 3 (package: nuvolaplayer3).&lt;br&gt;&#xA;When trying to install from terminal I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Failed to fetch https://tiliado.eu/nuvolaplayer/repository/deb/pool/devel/n/nuvolaplayer3/nuvolaplayer3_3.1.0~201608141426.c7e45b4-0+1~trusty_amd64.deb  HttpError403&#xA;&#xA;E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;When I download the deb package and run it opens in software centre, gets most of the way and then says the below error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Selecting previously unselected package libjavascriptcoregtk-4.0-18:amd64.&#xA;(Reading database ... &#xA;(Reading database ... 5%&#xA;(Reading database ... 10%&#xA;(Reading database ... 15%&#xA;(Reading database ... 20%&#xA;(Reading database ... 25%&#xA;(Reading database ... 30%&#xA;(Reading database ... 35%&#xA;(Reading database ... 40%&#xA;(Reading database ... 45%&#xA;(Reading database ... 50%&#xA;(Reading database ... 55%&#xA;(Reading database ... 60%&#xA;(Reading database ... 65%&#xA;(Reading database ... 70%&#xA;(Reading database ... 75%&#xA;(Reading database ... 80%&#xA;(Reading database ... 85%&#xA;(Reading database ... 90%&#xA;(Reading database ... 95%&#xA;(Reading database ... 100%&#xA;(Reading database ... 195971 files and directories currently installed.)&#xA;Preparing to unpack .../libjavascriptcoregtk-4.0-18_2.8.5+dfsg1-1~14.04~webkitteam1_amd64.deb ...&#xA;Unpacking libjavascriptcoregtk-4.0-18:amd64 (2.8.5+dfsg1-1~14.04~webkitteam1) ...&#xA;Selecting previously unselected package libwebkit2gtk-4.0-37:amd64.&#xA;Preparing to unpack .../libwebkit2gtk-4.0-37_2.8.5+dfsg1-1~14.04~webkitteam1_amd64.deb ...&#xA;Unpacking libwebkit2gtk-4.0-37:amd64 (2.8.5+dfsg1-1~14.04~webkitteam1) ...&#xA;Setting up libjavascriptcoregtk-4.0-18:amd64 (2.8.5+dfsg1-1~14.04~webkitteam1) ...&#xA;Setting up libwebkit2gtk-4.0-37:amd64 (2.8.5+dfsg1-1~14.04~webkitteam1) ...&#xA;Processing triggers for libc-bin (2.19-0ubuntu6.9) ...&#xA;dpkg: considering removing libjavascriptcoregtk-4.0-18:amd64 in favour of nuvolaplayer3 ...&#xA;dpkg: no, cannot proceed with removal of libjavascriptcoregtk-4.0-18:amd64 (--auto-deconfigure will help):&#xA; libwebkit2gtk-4.0-37:amd64 depends on libjavascriptcoregtk-4.0-18 (= 2.8.5+dfsg1-1~14.04~webkitteam1)&#xA;  libjavascriptcoregtk-4.0-18:amd64 is to be removed.&#xA;&#xA;dpkg: regarding .../nuvolaplayer3_0.20160613-Bundle1.for.Ubuntu.14.04.Trusty.Tahr_amd64.deb containing nuvolaplayer3:&#xA; nuvolaplayer3 conflicts with libjavascriptcoregtk-4.0-18&#xA;  libjavascriptcoregtk-4.0-18:amd64 (version 2.8.5+dfsg1-1~14.04~webkitteam1) is present and installed.&#xA;&#xA;dpkg: error processing archive /home/skywalker/Downloads/nuvolaplayer3_0.20160613-Bundle1.for.Ubuntu.14.04.Trusty.Tahr_amd64.deb (--install):&#xA; conflicting packages - not installing nuvolaplayer3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I run &lt;code&gt;sudo apt-get remove libjavascriptcoregtk-4.0-18:amd64&lt;/code&gt; due to the conflict but when I re-run the install after (either way) I get the same errors. I then find that the &lt;code&gt;libjavascriptcoregtk-4.0-18:amd64&lt;/code&gt; is installed again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried rebooting and also doing sudo apt-get update but no change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any repository I try on the next doesn't add so I used the &lt;code&gt;tiliado-repositories_0.4.0-1_all.deb&lt;/code&gt; file that installs them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea's?&lt;/p&gt;&#xA;" OwnerUserId="6043" LastEditorUserId="242" LastEditDate="2016-09-09T17:40:21.167" LastActivityDate="2016-09-09T17:44:05.417" Title="Issues installing Nuvola from Terminal or Package-Manager" Tags="|release-freya|software-installation|nuvola|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7430" PostTypeId="1" AcceptedAnswerId="7455" CreationDate="2016-09-03T15:36:54.940" Score="1" ViewCount="6185" Body="&lt;p&gt;I have been trying to install Elementary OS 0.3.2 alongside my Windows 10 install. I have my windows 10 on my 120gb ssd and I am trying to install Elementary OS on another 250gb HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First I copied the Elementary OS 0.3.2 iso to a USB stick to live boot and install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One problem I had was that when I loaded the OS, I had a black screen, so I had to add 'nomodeset' into the GRUB booting settings inorder to get the display working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I got the display working, I started the install process. When it started installing the grub it gave the error &quot;unable to install grub in /dev/sda. This is a fatal error.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then tried burning the iso to a disk instead and trying to install from that instead, because I read online that the USB drive could cause it, however that made no difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then tried using 0.3.1, because 0.3.2 made lots of changes to how the GRUB installs so I figured it was worth a shot. Using 0.3.1 I was able to complete the install with no error pop-ups. The problem however, is that it did not seem install a GRUB at all. In order to load up linux and not windows I must tell the bios to boot on the correct drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, because there is no GRUB, I cannot add the 'nomodeset' into the GRUB booting settings inorder to get the display working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have made sure that Windows secure boot and fast boot are disabled.&lt;/p&gt;&#xA;" OwnerUserId="6045" LastEditorUserId="5565" LastEditDate="2016-10-07T02:03:52.463" LastActivityDate="2016-10-07T02:03:52.463" Title="&quot;unable to install grub in /dev/sda. This is a fatal error.&quot;" Tags="|release-freya|dual-boot|grub|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7433" PostTypeId="2" ParentId="821" CreationDate="2016-09-04T08:12:47.717" Score="0" Body="&lt;p&gt;I have similar issues.so i tried different kernel and works only fine in 4.2.0-36-lowlatency . When i tried  linux-image-4.4.0-31-generic the touch pad was not stable and had some random issues with clicks&lt;/p&gt;&#xA;" OwnerUserId="6050" LastActivityDate="2016-09-04T08:12:47.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7434" PostTypeId="2" ParentId="7430" CreationDate="2016-09-04T12:36:47.153" Score="1" Body="&lt;p&gt;I had the same problem on my HP pavilion 15 with Freya and couldn't find any solution (none of them worked) . Recently I tried Loki beta 2 (It has newer kernel) and was successfully able to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to try to install Loki Beta on the laptop. However you may want to wait a few more days as it looks like Loki stable release is on the way and there is no direct upgrade path. If you are comfortable with reinstalling the Loki after few days, you should certainly try it now.&lt;/p&gt;&#xA;" OwnerUserId="6054" LastActivityDate="2016-09-04T12:36:47.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7435" PostTypeId="2" ParentId="7184" CreationDate="2016-09-04T13:02:53.363" Score="0" Body="&lt;p&gt;I think if you use the deb generator it won't work because the script from AMD won't recognize eOS as a derivation of Ubuntu. &#xA;I think you were able to build the deb file via command line and just preset the options. &lt;/p&gt;&#xA;" OwnerUserId="6055" LastActivityDate="2016-09-04T13:02:53.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7437" PostTypeId="1" CreationDate="2016-09-04T20:39:24.810" Score="1" ViewCount="1906" Body="&lt;p&gt;Making a presentation with WPS Office on Freya. When I add background music of sound, they will not play. The mp3s play fine in noise.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="3879" LastActivityDate="2021-01-27T21:34:41.973" Title="Can't play sound in WPS Office Presentation (Freya)" Tags="|release-freya|sound|office|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7438" PostTypeId="1" CreationDate="2016-09-04T22:37:08.297" Score="2" ViewCount="157" Body="&lt;p&gt;AppCenter is asking me for my password (to authenticate) for each item in the AppCenter. How do I either (1) turn off the need for authentication, and/or (2) have AppCenter only ask me once?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-04T22:37:08.297" Title="Turn off authentication for software update" Tags="|appcenter|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-18T22:02:39.527" ContentLicense="CC BY-SA 3.0" />
  <row Id="7439" PostTypeId="2" ParentId="7437" CreationDate="2016-09-04T22:57:13.980" Score="1" Body="&lt;p&gt;This is most likely to be an issue with WPS rather than with the OS itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you try using another suite? Libre Office for instance.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-04T22:57:13.980" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7440" PostTypeId="1" CreationDate="2016-09-04T23:03:41.733" Score="0" ViewCount="117" Body="&lt;p&gt;I get two errors while compiling the latest source of Files.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: The name `with_total_usage' does not exist in the context of `Granite.Widgets.StorageBar'&#xA;            storagebar = new Granite.Widgets.StorageBar.with_total_usage (fs_capacity, fs_used);&#xA;                             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; error: The name `FILES' does not exist in the context of `Granite.Widgets.StorageBar.ItemDescription'&#xA;        storagebar.update_block_size (Granite.Widgets.StorageBar.ItemDescription.FILES, size);&#xA;                                      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when compiling the 0.2.x version it builds perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, as a side question, why can't I compile &lt;code&gt;main.vala&lt;/code&gt; with &lt;code&gt;valac main.vala&lt;/code&gt; whitout failing because it can't find Marlin?&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-10-06T00:54:37.407" Title="Error while compiling latest source of Files" Tags="|pantheon-files|vala|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7441" PostTypeId="2" ParentId="7420" CreationDate="2016-09-04T23:04:56.667" Score="1" Body="&lt;p&gt;AFAIK the AppCenter only shows apps whitin the Ubuntu Store and sources. If those apps you have aren't on the official repos they won't show up there.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-04T23:04:56.667" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7444" PostTypeId="2" ParentId="7420" CreationDate="2016-09-05T08:57:53.337" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;In the repositories included with Loki.&lt;/li&gt;&#xA;&lt;li&gt;Have an AppData file that conforms to specification OR&lt;/li&gt;&#xA;&lt;li&gt;Have a .desktop file that conforms to specification.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;That said, Firefox appears in my AppCentre.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-05T08:57:53.337" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7446" PostTypeId="1" AcceptedAnswerId="12783" CreationDate="2016-09-05T14:38:24.113" Score="0" ViewCount="218" Body="&lt;p&gt;this is my system info picture:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XUTCY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XUTCY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;when I open Android Studio, want to start Android virtual Device to run my android codes ,errors happen as below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/bjming/Android/Sdk/tools/emulator -netdelay none -netspeed full -avd Nexus_5X_API_23&#xA;&#xA;sh: 1: glxinfo: not found&#xA;&#xA;sh: 1: glxinfo: not found&#xA;&#xA;libGL error: unable to load driver: r600_dri.so&#xA;&#xA;libGL error: driver pointer missing&#xA;&#xA;libGL error: failed to load driver: r600&#xA;&#xA;libGL error: unable to load driver: swrast_dri.so&#xA;&#xA;libGL error: failed to load driver: swrast&#xA;&#xA;X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;&#xA;  Major opcode of failed request:  155 (GLX)&#xA;&#xA;  Minor opcode of failed request:  24 (X_GLXCreateNewContext)&#xA;&#xA;  Value in failed request:  0x0&#xA;&#xA;  Serial number of failed request:  33&#xA;&#xA;  Current serial number in output stream:  34&#xA;&#xA;QObject::~QObject: Timers cannot be stopped from another thread&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;how to resolve this problem???&lt;/p&gt;&#xA;" OwnerUserId="6063" LastEditorUserId="78" LastEditDate="2016-09-08T00:47:00.660" LastActivityDate="2017-07-23T18:24:19.143" Title="Android Studio AVD error in elementary OS 0.4" Tags="|drivers|android-studio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7447" PostTypeId="1" AcceptedAnswerId="8756" CreationDate="2016-09-05T14:54:39.420" Score="18" ViewCount="6281" Body="&lt;p&gt;I've recently installed 0.4 Kodi Beta 2 on my XPS 13 as the broadcom WiFi chip installed on it only started receiving support on Ubuntu starting 16.04 on which 0.4 Kodi is based.&#xA;So far everything has been working wonderfully (except for a few minor bugs in the software centre), but there's one thing that boggles me and I'd love to hear your input on it.&#xA;Every time I resume the laptop from sleep, I get this popup asking for my password:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/FNX6l.png&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FNX6l.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Sometimes I even have to input my password in several times because after clicking &quot;Authenticate&quot; the window shows up again.&#xA;Is this a known bug? Does anyone know how to resolve it?&lt;/p&gt;&#xA;" OwnerUserId="6023" LastEditorUserId="5565" LastEditDate="2016-10-07T13:41:55.297" LastActivityDate="2018-03-20T22:37:09.633" Title="Multiple password prompts on resume from sleep: &quot;Authentication is required to refresh system sources&quot;" Tags="|security|suspend|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7448" PostTypeId="1" AcceptedAnswerId="7449" CreationDate="2016-09-05T15:31:08.673" Score="2" ViewCount="221" Body="&lt;p&gt;So is it possible to port apps like Scratch to a stock version of Ubuntu and if so where should I look to get started?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I can tell it should be possible since Scratch uses GTK which works just fine on Ubuntu, it is written in Vala which compiles to C. The only problem is that it uses some libraries of ElementaryOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ElementaryOS is based of Ubuntu so I dont see why this shouldn't work. &lt;/p&gt;&#xA;" OwnerUserId="6064" LastActivityDate="2016-09-05T17:09:17.120" Title="Can you port elementary's default apps to Ubuntu?" Tags="|ubuntu|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7449" PostTypeId="2" ParentId="7448" CreationDate="2016-09-05T17:09:17.120" Score="0" Body="&lt;p&gt;Short answer: Yes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ElementaryOS uses a framework called Granite in which all its apps heavily relay on. If you manage to install the Granite Framework and its dependencies on Ubuntu (GNOME) yes, theoretically you could have eOS apps on Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-05T17:09:17.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7450" PostTypeId="2" ParentId="7420" CreationDate="2016-09-05T21:55:04.843" Score="1" Body="&lt;p&gt;Try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This may be related to an unfixed bug:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1615270&quot; rel=&quot;nofollow&quot;&gt;AppCenter is empty if apt update has never been run [$30]&lt;/a&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Expectation:&#xA;  AppCenter fires up packagekitd and updates the software catalog transparently in the background when the session starts up&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Reality:&#xA;  AppCenter only shows data for the pre-installed packages. packagekitd never fixes it. AppCenter is useless until you open a Terminal and manually run apt update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-09-05T21:55:04.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7451" PostTypeId="2" ParentId="7430" CreationDate="2016-09-05T21:59:25.183" Score="0" Body="&lt;p&gt;Did you install your system to the correct bootloader partition (I may be using the wrong term)? At a point in installation it asks you where do you want to install (&quot;the bootloader&quot; maybe?), and I this caused issues for me in the past, because I've set it to something other than the root of the hard drive.&lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-09-05T21:59:25.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7452" PostTypeId="2" ParentId="4066" CreationDate="2016-09-05T22:18:46.043" Score="1" Body="&lt;p&gt;As bigbang mention above that elementary OS is based on LTS Ubuntu, so your card should work. Alternatively, you can compile the kernel 4.4 from source yourself. Use menuconfig for simple configuration and under device drivers menu, find wireless card support and look for atheros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you can use &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1484159&quot; rel=&quot;nofollow&quot;&gt;this link&lt;/a&gt; based on your current kernel. I think it should work fine. &lt;/p&gt;&#xA;" OwnerUserId="6066" LastActivityDate="2016-09-05T22:18:46.043" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7453" PostTypeId="2" ParentId="7440" CreationDate="2016-09-06T00:00:59.417" Score="1" Body="&lt;p&gt;Those two errors are pretty self-explanatory.  &lt;code&gt;Granite.Widgets.StorageBar.with_total_usage&lt;/code&gt; and &lt;code&gt;Granite.Widgets.StorageBar.ItemDescription.FILES&lt;/code&gt; don't exist in the version of granite you have installed.  You probably need a newer version of granite (quite possibly from git or whatever they use for revision control, if that's where you got files).&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2016-09-06T00:00:59.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7454" PostTypeId="1" CreationDate="2016-09-06T01:37:51.067" Score="1" ViewCount="150" Body="&lt;p&gt;I was prompted to install security updates which. Halfway through, the screen went black and stayed that way. I let it sit that way for 30 mins until I figured that at that point it must have froze so I pressed the power button to reboot. Now, once i get through the hard drive decrypt screen, the screen goes black instead of booting into the log in screen. Any one else experience this or have a solution that doesn't involve me wiping and reinstalling thus losing my files?&lt;/p&gt;&#xA;" OwnerUserId="6067" LastEditorUserId="5565" LastEditDate="2016-10-07T02:03:06.077" LastActivityDate="2024-03-30T11:04:20.573" Title="Froze during security update and now black screen" Tags="|boot|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7455" PostTypeId="2" ParentId="7430" CreationDate="2016-09-06T02:27:00.493" Score="2" Body="&lt;p&gt;This always works for me :-&#xA;1. download &amp;amp; create liveimage of supergrub iso.&#xA;2. boot super grub.&#xA;3. locate bootable OS  on the pc. ( if more than one OS on the PC)&#xA;4. boot you preferred OS.&#xA;5. Login &amp;amp; go terminal as root.&#xA;6. usually most people prefer grub on &quot;/dev/sda&quot; but that's no always the case. &#xA;So select the drive you prefer to install grub on.&#xA;7. run &quot;grub-install /dev/sd?&quot; change the &quot;?&quot; to the letter of the drive you wish to install grub on.&#xA;8. then run &quot;update-grub&quot; that should do it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;you could also run &quot;grub-mkconfig -o /boot/grub/grub.cfg&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: &#xA;A. I always suggest installing &quot;grub-customizer&quot;, this is a great graphical app to manage your grub. ie. update,add, change the OS boot order   , backup &amp;amp; save grub. Even move to a different drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;B. Supergrub&#xA; disk or &quot;RESCATUX&quot; are incredible tools to carry around with you. &lt;/p&gt;&#xA;" OwnerUserId="5350" LastActivityDate="2016-09-06T02:27:00.493" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7456" PostTypeId="2" ParentId="6756" CreationDate="2016-09-06T04:08:15.983" Score="1" Body="&lt;p&gt;My friend, there is NO SOLUTIONS to get this particular module (rtbth) work. This is a old-bug problem, with tons of how-to, PPA's and more on...but no one has ever posted a definitive, longterm solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've a HP with RealTek 3290 WiFi+Bluetooth adapter, but only WiFi work out-of-the-box.&lt;/p&gt;&#xA;" OwnerUserId="6070" LastActivityDate="2016-09-06T04:08:15.983" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7457" PostTypeId="1" CreationDate="2016-09-06T09:11:07.127" Score="1" ViewCount="58" Body="&lt;p&gt;I'm pretty new in Linux and bash and I am very satisfied with my elementaryOS. I have a small problem. I need to disable the touchpad when I'm using the trackpoint. I am using Freya on Thinkpad X1 Carbon 1st Gen.&#xA;Any help will be much appreciated..&lt;/p&gt;&#xA;" OwnerUserId="6071" LastEditorUserId="6071" LastEditDate="2016-09-11T09:46:38.087" LastActivityDate="2016-09-11T09:46:38.087" Title="how to disable touchpad while using the trackpoint?" Tags="|touchpad|thinkpad|" AnswerCount="0" CommentCount="0" ClosedDate="2016-09-25T16:21:59.133" ContentLicense="CC BY-SA 3.0" />
  <row Id="7458" PostTypeId="2" ParentId="7454" CreationDate="2016-09-06T10:01:23.980" Score="0" Body="&lt;p&gt;Have a look at these posts, They should be able to help you solve your predicament !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://community.linuxmint.com/tutorial/view/842&quot; rel=&quot;nofollow&quot;&gt;https://community.linuxmint.com/tutorial/view/842&lt;/a&gt;&#xA;&lt;a href=&quot;http://www.techradar.com/how-to/computing/how-to-boot-repair-ubuntu-1315203&quot; rel=&quot;nofollow&quot;&gt;http://www.techradar.com/how-to/computing/how-to-boot-repair-ubuntu-1315203&lt;/a&gt;&#xA;www seravo.fi/2015/fixing-black-screen-after-login-in-ubuntu-14-04&lt;/p&gt;&#xA;" OwnerUserId="5350" LastActivityDate="2016-09-06T10:01:23.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7459" PostTypeId="2" ParentId="4066" CreationDate="2016-09-06T10:06:50.967" Score="0" Body="&lt;p&gt;Just install the driver by building it with git.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/ajaybhatia/Qualcomm-Atheros-QCA9377-Wifi-Linux&quot; rel=&quot;nofollow&quot;&gt;https://github.com/ajaybhatia/Qualcomm-Atheros-QCA9377-Wifi-Linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your unsure how to do it, you tube how to build with gitclone.&lt;/p&gt;&#xA;" OwnerUserId="5350" LastActivityDate="2016-09-06T10:06:50.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7460" PostTypeId="1" CreationDate="2016-09-06T10:10:07.857" Score="1" ViewCount="81" Body="&lt;p&gt;I'm trying to learn to make applications with vala, and i'm fond of test driven developpement. But i can't find any example of real tested code in vala, envelope has one Unit Test, but i don't manage to adapt it in other projects.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here's my tests directory's Cmake file : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkg_check_modules(DEPS REQUIRED&#xA;  granite&amp;gt;=0.3&#xA;  gtksourceview-3.0&amp;gt;=3.10&#xA;  gthread-2.0&#xA;  gtk+-3.0&amp;gt;=3.9.10&#xA;)&#xA;&#xA;set (PKG_DEPS&#xA; granite&amp;gt;=0.3&#xA; gee-0.8&#xA; gtksourceview-3.0&#xA; gtk+-3.0&#xA; webkit2gtk-4.0&#xA; discount&#xA;)&#xA;&#xA;set (VALA_DEPS&#xA; granite&#xA; gee-0.8&#xA; gtksourceview-3.0&#xA; gtk+-3.0&#xA; webkit2gtk-4.0&#xA; discount&#xA;)&#xA;&#xA;&#xA;find_package(Vala REQUIRED)&#xA;&#xA;include(ValaVersion)&#xA;ensure_vala_version(&quot;0.23.2&quot; MINIMUM)&#xA;&#xA;include(ValaPrecompile)&#xA;enable_testing ()&#xA;&#xA;add_definitions(${DEPS_CFLAGS})&#xA;add_definitions (&quot;-DGETTEXT_PACKAGE=\&quot;${GETTEXT_PACKAGE}\&quot;&quot;)&#xA;add_definitions (${CC_OPTS})&#xA;&#xA;link_libraries(${DEPS_LIBRARIES})&#xA;link_directories(${DEPS_LIBRARY_DIRS})&#xA;&#xA;set (LIBS ${LIBS} enotes-clib)&#xA;set (EXEC_NAME_TESTS &quot;enotes-tests&quot;)&#xA;&#xA;vala_precompile(VALA_C_TEST ${EXEC_NAME_TESTS}&#xA;  ../src/Main.vala&#xA;  ../src/Application.vala&#xA;  ../src/Widgets/Editor.vala&#xA;  ../src/Widgets/Headerbar.vala&#xA;  ../src/Widgets/ViewEditStack.vala&#xA;  ../src/Widgets/NewNotebookDialog.vala&#xA;  ../src/Widgets/PreferencesDialog.vala&#xA;  ../src/Widgets/NotebookItem.vala&#xA;  ../src/Widgets/BookmarkItem.vala&#xA;  ../src/Widgets/TrashItem.vala&#xA;  ../src/Widgets/BookmarkButton.vala&#xA;  ../src/Widgets/PageItem.vala&#xA;  ../src/Widgets/PagesList.vala&#xA;  ../src/Widgets/Sidebar.vala&#xA;  ../src/Widgets/SidebarItem.vala&#xA;  ../src/Widgets/Viewer.vala&#xA;  ../src/Widgets/Window.vala&#xA;  ../src/Styles/air.vala&#xA;  ../src/Styles/elementary.vala&#xA;  ../src/Styles/modest.vala&#xA;  ../src/Services/Bookmark.vala&#xA;  ../src/Services/FileManager.vala&#xA;  ../src/Services/Notebook.vala&#xA;  ../src/Services/Page.vala&#xA;  ../src/Services/Settings.vala&#xA;  ../src/Services/Trash.vala&#xA;  ../src/config.vala&#xA;&#xA;  FileManagerTest.vala&#xA;PACKAGES&#xA;  ${VALA_DEPS}&#xA;OPTIONS&#xA;  ${GLOBAL_VALAC_OPTIONS}&#xA; -g&#xA;  --vapidir=${CMAKE_SOURCE_DIR}/vapi&#xA;  --thread&#xA;  --target-glib=2.38 # FIXME check before, and target the same version&#xA;)&#xA;&#xA;&#xA;add_executable(${EXEC_NAME_TESTS} ${VALA_C_TEST})&#xA;add_test (${EXEC_NAME_TESTS} ${CMAKE_CURRENT_BINARY_DIR}/enotes-tests)&#xA;&#xA;# copy test data&#xA;file(COPY data DESTINATION ${CMAKE_CURRENT_BINARY_DIR})&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I obtain an error on add_executable() function :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tests/CMakeFiles/enotes-tests.dir/build.make:912: avertissement : surchargement de la recette pour la cible « tests/enotes-tests »&#xA;tests/CMakeFiles/enotes-tests.dir/build.make:89: avertissement : ancienne recette ignorée pour la cible « tests/enotes-tests »&#xA;make[2]: ***  Aucune règle pour fabriquer la cible « ../tests/enotes-tests », nécessaire pour « tests/enotes-tests ». Arrêt.&#xA;CMakeFiles/Makefile2:265 : la recette pour la cible « tests/CMakeFiles/enotes-tests.dir/all » a échouée&#xA;make[1]: *** [tests/CMakeFiles/enotes-tests.dir/all] Erreur 2&#xA;Makefile:127 : la recette pour la cible « all » a échouée&#xA;make: *** [all] Erreur 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Besides, envelope is an unmaintained code, i'm wondering how elementary envisions unit testing nowadays. Some people have taken the topic, but unfortunately, i'm a vala beginner, i can't follow their steps :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://chrisdaley.biz/test-driven-development-in-vala-pt-6.html#test-driven-development-in-vala-pt-6&quot; rel=&quot;nofollow&quot;&gt;http://chrisdaley.biz/test-driven-development-in-vala-pt-6.html#test-driven-development-in-vala-pt-6&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;EDIT : i'm not talking about writing a CmakeList file for my application, but writing a CmakeList file for tests/ directory. One of the tricky part is dealing with two main() functions.&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have any lead on how to write cmake file for unit testing in vala the right way, i'll be very thankful.&lt;/p&gt;&#xA;" OwnerUserId="6072" LastEditorUserId="6072" LastEditDate="2016-09-09T07:10:12.243" LastActivityDate="2016-09-09T07:10:12.243" Title="Is there a scaffolding for elementary OS app unit testing?" Tags="|testing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7462" PostTypeId="2" ParentId="6648" CreationDate="2016-09-06T10:22:08.583" Score="-2" Body="&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;sudo apt install --fix-missing&#xA;sudo apt update&#xA;sudo apt upgrade -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5350" LastEditorUserId="26" LastEditDate="2016-09-08T00:48:20.103" LastActivityDate="2016-09-08T00:48:20.103" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7463" PostTypeId="2" ParentId="7333" CreationDate="2016-09-06T10:31:48.653" Score="0" Body="&lt;p&gt;Maybe you could install it with &lt;a href=&quot;https://github.com/Devil505/elementaryos-postinstall&quot; rel=&quot;nofollow&quot;&gt;https://github.com/Devil505/elementaryos-postinstall&lt;/a&gt; script.&lt;/p&gt;&#xA;" OwnerUserId="6072" LastActivityDate="2016-09-06T10:31:48.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7464" PostTypeId="2" ParentId="7428" CreationDate="2016-09-06T10:32:35.490" Score="1" Body="&lt;p&gt;Follow these instructions&#xA;&lt;a href=&quot;https://tiliado.eu/nuvolaplayer/repository/&quot; rel=&quot;nofollow&quot;&gt;https://tiliado.eu/nuvolaplayer/repository/&lt;/a&gt;&#xA;but first run:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install --fix-missing&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get upgrade -y&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5350" LastEditorUserId="242" LastEditDate="2016-09-09T17:44:05.417" LastActivityDate="2016-09-09T17:44:05.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7465" PostTypeId="2" ParentId="5345" CreationDate="2016-09-06T10:45:39.640" Score="1" Body="&lt;p&gt;This always works for me:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;download &amp;amp; create liveimage of supergrub iso.&lt;/li&gt;&#xA;&lt;li&gt;boot super grub.&lt;/li&gt;&#xA;&lt;li&gt;locate bootable OS on the pc. ( if more than one OS on the PC)&lt;/li&gt;&#xA;&lt;li&gt;boot you preferred OS.&lt;/li&gt;&#xA;&lt;li&gt;Login &amp;amp; go terminal as root.&lt;/li&gt;&#xA;&lt;li&gt;usually most people prefer grub on &quot;/dev/sda&quot; but that's no always the case. So select the drive you prefer to install grub on.&lt;/li&gt;&#xA;&lt;li&gt;run &quot;grub-install /dev/sd?&quot; change the &quot;?&quot; to the letter of the drive you wish to install grub on.&lt;/li&gt;&#xA;&lt;li&gt;then run &quot;update-grub&quot; that should do it.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;you could also run &lt;code&gt;grub-mkconfig -o /boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note:&lt;br&gt;&#xA;A. I always suggest installing &quot;grub-customizer&quot;, this is a great graphical app to manage your grub. ie. update,add, change the OS boot order , backup &amp;amp; save grub. Even move to a different drive.&lt;br&gt;&#xA;B. Supergrub disk or &quot;RESCATUX&quot; are incredible tools to carry around with you.&lt;/p&gt;&#xA;" OwnerUserId="5350" LastEditorUserId="26" LastEditDate="2016-09-08T00:49:12.390" LastActivityDate="2016-09-08T00:49:12.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7466" PostTypeId="1" CreationDate="2016-09-06T13:16:23.950" Score="1" ViewCount="22" Body="&lt;p&gt;Hello I want to install eclipse in my elementary os, I downloaded eclipse but when I want to use it, it begins to freeze all my computer so I need to reboot from hardware &lt;/p&gt;&#xA;" OwnerUserId="6076" LastActivityDate="2016-09-06T13:16:23.950" Title="Install Eclipse" Tags="|files|" AnswerCount="0" CommentCount="0" ClosedDate="2016-09-08T00:47:13.677" ContentLicense="CC BY-SA 3.0" />
  <row Id="7467" PostTypeId="2" ParentId="6916" CreationDate="2016-09-06T13:18:46.697" Score="1" Body="&lt;p&gt;Closely related to the official Mac OSX icons are the icons of Moka and Faba.&#xA;The Faba-Ceru icons are often used to mimic these:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install them, type this in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:moka/stable&#xA;sudo apt-get update&#xA;sudo apt-get install faba-icon-theme faba-colors faba-mono-icons&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6074" LastActivityDate="2016-09-06T13:18:46.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7469" PostTypeId="2" ParentId="6756" CreationDate="2016-09-06T13:41:29.853" Score="2" Body="&lt;p&gt;According to this site, HP Pavilion g7-2268wm does not have Bluetooth&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://support.hp.com/us-en/document/c03487531&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.hp.com/us-en/document/c03487531&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even checked the Windows drivers for the machine and couldn't find anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-Notebook-PC-series/5296086/model/5312246&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g7-Notebook-PC-series/5296086/model/5312246&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/767274/414234&quot;&gt;This post&lt;/a&gt; claims that you need Kernel 4.4.0 (Xenial) in order to see your bluetooth card. Freya runs on kernel 3.19, if you want to upgrade run this command. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial&#xA;  xserver-xorg-core-lts-xenial xserver-xorg-lts-xenial&#xA;  xserver-xorg-video-all-lts-xenial xserver-xorg-input-all-lts-xenial&#xA;  libwayland-egl1-mesa-lts-xenial&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Once you're done restart your machine and try again. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-06T13:41:29.853" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7471" PostTypeId="1" CreationDate="2016-09-07T01:37:03.977" Score="1" ViewCount="27" Body="&lt;p&gt;I have Windows 7 installed, and am attempting to set up elementary os alongside windows. When I attempt to set up the partition, there seems to be only free space, I cannot see my windows partitions. GParted only sees free space as well. &lt;/p&gt;&#xA;" OwnerUserId="6083" LastActivityDate="2016-09-07T01:37:03.977" Title="Trouble Installing as Dual Boot" Tags="|dual-boot|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7472" PostTypeId="1" AcceptedAnswerId="7548" CreationDate="2016-09-07T09:54:17.653" Score="7" ViewCount="10353" Body="&lt;p&gt;Currently running Freya on a 2+ years old machine that came with Nvidia dual graphics (GeForce GT 740M). On Ubuntu 14.04, Mint 17 and Elementary 0.3.2, I have had to install Nvidia proprietary drivers using the 'Additional Drivers' dialog box, but I tried the Loki Beta 2 and didn't find this in the menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Without this, my laptop simply does not wake up from suspend or even lock screen. As soon as the screen sleeps, I have to force shutdown my laptop and restart it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the solution I found to be working was to install Nvidia binary driver version 352.63. It also install an app 'nvidia-settings' wherein I have to ask it to use Intel graphics on power-saving mode, to get the screen to behave as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will there be an option to install and use proprietary drivers as easy as it is in Freya? Would I have to find another way to install it in Loki? If so, what would that be?&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-09-11T11:46:34.233" Title="Install Nvidia dual-graphics driver on Loki?" Tags="|greeter|release-loki|suspend|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7475" PostTypeId="1" CreationDate="2016-09-07T12:58:17.123" Score="3" ViewCount="741" Body="&lt;p&gt;I'm new to Linux. I want to dual boot elementary OS and windows 10 on my dell xps 13 which has QHD+ resolution and skylake processor. Is it ok?&lt;/p&gt;&#xA;" OwnerUserId="6088" LastEditorUserId="308" LastEditDate="2018-08-07T17:16:47.733" LastActivityDate="2018-08-07T17:16:47.733" Title="Can I install elementary OS on my dell xps 13 9350 now?" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="7476" PostTypeId="1" AcceptedAnswerId="7500" CreationDate="2016-09-07T13:19:59.547" Score="2" ViewCount="6239" Body="&lt;p&gt;I am using loki beta 2 version. but i have problem with epiphany web browser several times, it asking about flash player. How can i update epiphany browser flash player?&#xA;I installed adobe flash player but couldn't install it.&#xA;If anyone can help me about flash player issue?&lt;/p&gt;&#xA;" OwnerUserId="5833" LastEditorUserId="578" LastEditDate="2016-12-29T14:58:52.537" LastActivityDate="2019-03-10T20:03:38.783" Title="How can I update the Epiphany browser flash player?" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7477" PostTypeId="2" ParentId="7475" CreationDate="2016-09-07T13:25:27.507" Score="1" Body="&lt;p&gt;Since Elementaryos is based on Ubuntu you should be ok.&#xA;Check this page by Ubuntu : &lt;a href=&quot;http://www.ubuntu.com/certification/hardware/201508-18805/&quot; rel=&quot;nofollow&quot;&gt;http://www.ubuntu.com/certification/hardware/201508-18805/&lt;/a&gt;.&#xA;More information regarding dual boot can also be found on the Ubuntu site here : &lt;a href=&quot;https://help.ubuntu.com/community/WindowsDualBoot&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/WindowsDualBoot&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6089" LastActivityDate="2016-09-07T13:25:27.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7478" PostTypeId="1" CreationDate="2016-09-07T14:40:49.447" Score="0" ViewCount="268" Body="&lt;ol&gt;&#xA;&lt;li&gt;open switchboard.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TryHh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TryHh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;open the share plugin.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hImi0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hImi0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;As you can see, it doesn't work.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tfBfU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tfBfU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-09-07T16:13:46.627" LastActivityDate="2016-10-14T09:18:51.017" Title="The share plugin in switchboard seems not to work in Loki" Tags="|release-loki|samba|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7482" PostTypeId="2" ParentId="7334" CreationDate="2016-09-07T18:26:18.460" Score="0" Body="&lt;p&gt;My temporary solution for this problem is as follows: If I know I will be away from the computer for a while, I press Ctrl + Alt + Del then logout and shut down. Then I restart when I get back. If I was working of the internet I use Restore session to get back to what I was doing.&lt;/p&gt;&#xA;" OwnerUserId="6093" LastActivityDate="2016-09-07T18:26:18.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7484" PostTypeId="2" ParentId="7460" CreationDate="2016-09-07T20:52:35.090" Score="1" Body="&lt;p&gt;I should suggest to you to take a look at the elementary OS webpage,  at Developer Section:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/code/getting-started#&quot; rel=&quot;nofollow&quot;&gt;Getting Started&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find there how to get cmake modules to elementary-os development and how to write CMakeList files.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-09-07T20:52:35.090" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7486" PostTypeId="1" CreationDate="2016-09-08T08:13:28.767" Score="0" ViewCount="194" Body="&lt;p&gt;One of the reasons I started to use linux is boldly written on the Elementary website: No Ads. No Spying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In that spirit, I also moved to Signal, which has a Chrome app. Two of my friends have installed it on their Windows 10 systems and it works flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I am unable to get it to work. Contacting the Signal team was not helpful because they told me: we don't support &quot;elementaryOS.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app is stuck on the introductory blue screen without any logo or any text. &lt;a href=&quot;https://i.stack.imgur.com/O8qNq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Screenshot here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I close this window, and run Signal again from the Applications menu, it won't even start and get to the point it does, on first install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried reinstalling the chrome app as well as restarting my system, but neither helped. I also found out that Google Keep works fine, but Pocket doesn't. I'm not sure why this is happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running elementaryOS 0.3.2 x64 and Chrome Version 52.0.2743.116 (64-bit)&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-09-10T08:14:54.200" Title="Some Chrome apps work, others don't" Tags="|google-chrome|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7487" PostTypeId="1" CreationDate="2016-09-08T11:09:24.857" Score="1" ViewCount="1663" Body="&lt;p&gt;What i want no achieve is something like this,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/LkTJD.png&quot; alt=&quot;window split in four&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how do i go about defining grids and snap windows to them?&lt;/p&gt;&#xA;" OwnerUserId="36" LastActivityDate="2016-09-09T10:01:36.223" Title="how to define a grid and snap windows to it?" Tags="|window-management|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7488" PostTypeId="2" ParentId="7486" CreationDate="2016-09-08T13:41:36.390" Score="0" Body="&lt;p&gt;From Wiki,&quot;Signal's official Android client requires the proprietary Google Play Services because the app is dependent on Google's GCM &quot;&#xA;Maybe chrome is missing dependencies for it to be installed. what version of elementary &amp;amp; chrome are you using. Have all updates being done. When tou do your next update.Run &quot;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade &amp;amp;&amp;amp; sudo apt-get install fix-missing&quot;. The fixed missing, in case a pkg may be missing a component.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is possible to &quot;BUILD from SOURCE&quot; follow the link here.&#xA;&lt;a href=&quot;https://timtaubert.de/blog/2016/01/build-your-own-signal-desktop/&quot; rel=&quot;nofollow&quot;&gt;https://timtaubert.de/blog/2016/01/build-your-own-signal-desktop/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would suggest you wait to Friday for the release of elementary Loki stable. then see what happens.&lt;/p&gt;&#xA;" OwnerUserId="5350" LastActivityDate="2016-09-08T13:41:36.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7490" PostTypeId="1" AcceptedAnswerId="7496" CreationDate="2016-09-08T16:07:10.030" Score="6" ViewCount="30567" Body="&lt;p&gt;My AppCenter has an icon indicating several updates in the queue. How can I download and install these updates from Terminal/CLI without opening AppCenter?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorDisplayName="user170" LastEditDate="2017-03-03T16:38:03.413" LastActivityDate="2021-02-10T23:12:53.067" Title="Update with terminal instead of AppCenter" Tags="|pantheon-terminal|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7491" PostTypeId="1" CreationDate="2016-09-08T18:22:26.153" Score="1" ViewCount="68" Body="&lt;p&gt;After reading through all of the documentation with regard to getting started in developing for elementary OS, I am still a little unclear on how one actually tests their code for bug fixes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an example, lets say that someone wishes to fix a few bugs in a Switchboard plug. They pull the trunk and after reviewing the code believe they see the issue and modify it accordingly. They then compile/build it with no issues but now that it is built, how do they add it to their Switchboard for testing it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is quite likely I am missing something here and hopefully someone could point me in the right direction so that I can begin helping.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="6103" LastActivityDate="2016-09-10T02:30:37.270" Title="Workflow for testing bug fixes" Tags="|development|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7493" PostTypeId="2" ParentId="3840" CreationDate="2016-09-08T23:53:44.670" Score="1" Body="&lt;p&gt;For Loki:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c &quot;echo 'deb http://download.opensuse.org/repositories/isv:/ownCloud:/desktop/Ubuntu_16.04/ /' &amp;gt;&amp;gt; /etc/apt/sources.list.d/owncloud-client.list&quot;&#xA;sudo apt-get update&#xA;sudo apt-get install owncloud-client&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5517" LastActivityDate="2016-09-08T23:53:44.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7496" PostTypeId="2" ParentId="7490" CreationDate="2016-09-09T09:25:57.783" Score="9" Body="&lt;p&gt;elementaryOS natively supports two different packaging formats, deb packages and Flatpaks.&#xA;The system's deb packages are managed via the Aptitude package manager while Flatpaks are maintained separately with Flatpak's own command-line program.&lt;/p&gt;&#xA;&lt;h2&gt;Aptitude&lt;/h2&gt;&#xA;&lt;p&gt;Aptitude has multiple command-line interfaces available.&lt;/p&gt;&#xA;&lt;p&gt;The new &lt;code&gt;apt&lt;/code&gt; tool has been in Ubuntu since 14.04. &lt;code&gt;apt(8)&lt;/code&gt; describes it thus:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The apt command is meant to be pleasant for end users and does not need&#xA;to be backward compatible like apt-get(8).&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;To update your system with &lt;code&gt;apt&lt;/code&gt; is as simple as:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt full-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;apt-get&lt;/code&gt; is functionally very similar to &lt;code&gt;apt&lt;/code&gt;, so there is nothing wrong with using it. &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7494/5722&quot;&gt;Prashantc's answer&lt;/a&gt; is mostly correct, however will fall short if an updated package requires additional packages. If you are using &lt;code&gt;apt-get&lt;/code&gt;, unless you have a specific reason for not upgrading certain packages, you should use:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The classic example, being that &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; will fail to update &lt;code&gt;linux-image-generic&lt;/code&gt; as this needs to bring in a new dependency (i.e. &lt;code&gt;linux-image-3.16.0-25-generic&lt;/code&gt;). &lt;code&gt;dist-upgrade&lt;/code&gt; on the other hand handles changing dependencies with new versions of packages.&lt;/p&gt;&#xA;&lt;p&gt;If you want something a little more interactive, you can use the Ncurses-based &lt;code&gt;aptitude&lt;/code&gt; (installed by default), which is a frontend to &lt;code&gt;apt&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo aptitude&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press &lt;code&gt;u&lt;/code&gt; to update the latest package list, and then &lt;code&gt;g&lt;/code&gt; to install updates.&lt;/p&gt;&#xA;&lt;p&gt;You can find more information about &lt;code&gt;aptitude&lt;/code&gt; &lt;a href=&quot;https://help.ubuntu.com/community/AptitudeSurvivalGuide&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;h2&gt;Flatpak&lt;/h2&gt;&#xA;&lt;p&gt;Flatpak is a packaging format for distributing desktop applications on Linux.&#xA;Flatpak updates are not handled by Aptitude but instead require using the &lt;code&gt;flatpak&lt;/code&gt; command.&#xA;Flatpak keeps separate installations for each individual user while also maintaining a system-wide installation.&#xA;Individual user installations are separated from each other and also separate from the system installation.&#xA;This requires each one to be updated separately.&lt;/p&gt;&#xA;&lt;p&gt;To update the current user's Flatpaks, use the following command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak update --user&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;System-wide Flatpaks are updated similarly.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak update --system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can find additional information about Flatpak &lt;a href=&quot;https://flatpak.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="20782" LastEditDate="2021-02-10T23:12:53.067" LastActivityDate="2021-02-10T23:12:53.067" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="7497" PostTypeId="2" ParentId="7487" CreationDate="2016-09-09T10:01:36.223" Score="1" Body="&lt;p&gt;This is generally a feature associated with a &lt;a href=&quot;https://en.wikipedia.org/wiki/Tiling_window_manager&quot; rel=&quot;nofollow&quot;&gt;tiling WM&lt;/a&gt;. Gala is a floating WM and does not support anything more advanced than window snapping.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative would be to 'fake' tiling features using something like &lt;a href=&quot;https://github.com/TheWanderer/stiler&quot; rel=&quot;nofollow&quot;&gt;Stiler&lt;/a&gt;, which lets you bind keys to resize / move windows, emulating the behaviour of a tiling WM.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-09T10:01:36.223" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7499" PostTypeId="2" ParentId="7491" CreationDate="2016-09-09T12:18:12.040" Score="0" Body="&lt;p&gt;After digging further and actually running the build, I noticed that the updated files were copied over onto my actual machine and I could see the changes.&lt;/p&gt;&#xA;" OwnerUserId="6103" LastActivityDate="2016-09-09T12:18:12.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7500" PostTypeId="2" ParentId="7476" CreationDate="2016-09-09T12:44:35.920" Score="2" Body="&lt;p&gt;Close your browsers and remove your flash installation&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge --remove flashplugin-installer adobe-flashplugin&#xA;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now install pepperflash-plugin for Chromium and Firefox (works for all other browsers)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install browser-plugin-freshplayer-pepperflash&#xA;pepperflashplugin-nonfree&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;a href=&quot;http://www.adobe.com/software/flash/about/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.adobe.com/software/flash/about/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and it should say that you have Flas version 22 installed. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="26" LastEditDate="2019-03-10T20:03:38.783" LastActivityDate="2019-03-10T20:03:38.783" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="7502" PostTypeId="1" AcceptedAnswerId="7503" CreationDate="2016-09-09T15:32:30.483" Score="10" ViewCount="15824" Body="&lt;p&gt;How can I upgrade from elementary OS Freya to Loki without losing my data, you may ask?&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-09-21T15:15:58.950" Title="What is the recommended way to upgrade elementary OS 0.3 Freya to 0.4 Loki?" Tags="|release-freya|release-loki|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7503" PostTypeId="2" ParentId="7502" CreationDate="2016-09-09T15:32:30.483" Score="10" Body="&lt;p&gt;There continues to be no officially supported way to upgrade between version of elementary OS. This is due to the installer being a patched Ubuntu/Debian installer with no custom elementary support for upgrades, only detection (which I believe has been upstreamed).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Clean installation&lt;/strong&gt; is the recommended method, this creates a new working environment and removes any config conflicts commonly encountered when keeping an entire home partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Upgrading though the update manager&lt;/strong&gt; is not even possible, the update managers vary between these versions and this will never be made available. Any upgrade offer you see there is for the Ubuntu backend, not elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Upgrade from installation media&lt;/strong&gt; works much like installing cleanly does, only you leave your data on the disk &lt;em&gt;as well as&lt;/em&gt; making a backup. This is untested and results will vary significantly. If you experience any issues, the likely response will be &quot;does this happen on a clean install?&quot;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;strong&gt;Back up everything&lt;/strong&gt;  &lt;/li&gt;&#xA;  &lt;li&gt;Make some Loki installation media.  &lt;/li&gt;&#xA;  &lt;li&gt;Boot from the install disk and select the &quot;upgrade&quot; option.  &lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Source: Me, &lt;a href=&quot;https://github.com/elementary/website/blame/master/docs/installation.md&quot;&gt;I wrote most of the installation guide&lt;/a&gt;.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-09T15:32:30.483" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7504" PostTypeId="2" ParentId="7428" CreationDate="2016-09-09T15:51:12.430" Score="2" Body="&lt;p&gt;Nuvola Player developer here. If the installation via the Nuvola Player bundle fails because of conflicts, the recommended method is to use &lt;a href=&quot;https://tiliado.github.io/nuvolaplayer/documentation/3.0/install-ubuntu.html#installer&quot; rel=&quot;nofollow&quot;&gt;Tiliado Repository Installer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6112" LastActivityDate="2016-09-09T15:51:12.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7505" PostTypeId="1" CreationDate="2016-09-09T15:59:20.557" Score="11" ViewCount="1352" Body="&lt;p&gt;A stable version of elementary OS (0.4 Loki) was just released and I have installed a beta version of it on my system. Do I have to make a clean install to user the stable version or is it possible to upgrade from the beta?&lt;/p&gt;&#xA;" OwnerUserId="3768" LastEditorUserId="3768" LastEditDate="2016-09-09T16:07:46.783" LastActivityDate="2016-09-10T13:03:02.503" Title="How can I upgrade from the beta to the stable version of elementary OS?" Tags="|release-loki|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7506" PostTypeId="2" ParentId="7505" CreationDate="2016-09-09T16:07:18.540" Score="6" Body="&lt;p&gt;First install the package that provides &lt;code&gt;add-apt-repository&lt;/code&gt; if it's not already installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next, remove elementary OS Beta PPA and replaced it with the stable PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:elementary-os/daily&#xA;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Refresh the repository information:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remove the elementary OS pre-release packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove elementary-os-prerelease &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update/install the Linux kernel packages for the stable release:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-lts-xenial xserver-xorg-lts-xenial libgl1-mesa-glx-lts-xenial libegl1-mesa-lts-xenial&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And finally upgrade the your system&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's a good idea to restart your system too.&lt;/p&gt;&#xA;" OwnerUserId="3768" LastEditorUserId="3768" LastEditDate="2016-09-10T13:03:02.503" LastActivityDate="2016-09-10T13:03:02.503" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7507" PostTypeId="1" AcceptedAnswerId="7508" CreationDate="2016-09-09T18:19:42.650" Score="26" ViewCount="77547" Body="&lt;p&gt;When I went to install aptik, I tried to add the PPA in the terminal as I normally do with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:teejee2008/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But I get the message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo: apt-add-repository: command not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Undeterred, I downloaded the .deb file and used gdebi (downloaded from the new Software Center) to install it, which it did fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I open Aptik from the Applications menu, it gives me the following error (see picture).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GMdaK.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GMdaK.png&quot; alt=&quot;alert: command not available: add-apt-repository&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do? This is a show stopper for me if I can't add a PPA to restore my backup.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="16381" LastEditDate="2019-01-25T05:45:31.707" LastActivityDate="2019-01-25T05:45:31.707" Title="How can I add a PPA in Loki?" Tags="|release-loki|release-juno|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7508" PostTypeId="2" ParentId="7507" CreationDate="2016-09-09T18:30:34.683" Score="38" Body="&lt;p&gt;As far as I know it is intentional from the eOS team. I also had such issues in Loki beta. In order to add PPAs run the following in the terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6115" LastEditorUserId="7492" LastEditDate="2017-06-13T11:45:47.020" LastActivityDate="2017-06-13T11:45:47.020" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7509" PostTypeId="1" CreationDate="2016-09-09T20:08:37.953" Score="2" ViewCount="7974" Body="&lt;p&gt;I upgraded to Loki release today, and the PPA for elementary tweaks is not found. I installed it on Loki Beta 2, so I assume that it isn't configured on the server side for release. The PPA I'm trying is &lt;code&gt;ppa:mpstark/elementary-tweaks-daily&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't use elementary OS without the dark theme, the light theme hurts my eyes and I get a migraine. Is there somewhere else to install elementary tweaks from? I'm afraid that if I can't use the dark theme, I will have to ask for my money back and use another OS :(&lt;/p&gt;&#xA;" OwnerUserId="4254" LastEditorUserId="68" LastEditDate="2016-10-01T23:15:29.130" LastActivityDate="2016-10-02T13:50:12.677" Title="elementary tweaks missing in Loki" Tags="|themes|release-loki|" AnswerCount="3" CommentCount="0" ClosedDate="2016-10-02T13:52:32.883" ContentLicense="CC BY-SA 3.0" />
  <row Id="7510" PostTypeId="1" AcceptedAnswerId="7696" CreationDate="2016-09-09T20:23:04.763" Score="6" ViewCount="10146" Body="&lt;p&gt;I just installed loki 0.4 and was surprised to find the update manager missing. No more easy way to select package sources, drivers etc. Is that a bug or a design choice??&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-15T21:15:32.697" Title="Loki - Where is the update manager?" Tags="|software-installation|updates|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7512" PostTypeId="1" CreationDate="2016-09-09T20:25:47.670" Score="2" ViewCount="8372" Body="&lt;p&gt;I've installed lok 0.4 today and the app center is empty except for installed applications. This is a known bug:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1615270&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/appcenter/+bug/1615270&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the suggested workaround in the link (i.e. &quot;if you restart (or otherwise kill appcenter) the issue will correct itself&quot;) does not work. Still empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas for another workaround?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-18T20:07:39.947" Title="Loki - App center empty" Tags="|software-installation|release-loki|appcenter|" AnswerCount="1" CommentCount="2" ClosedDate="2016-09-11T11:40:25.833" ContentLicense="CC BY-SA 3.0" />
  <row Id="7513" PostTypeId="1" AcceptedAnswerId="7708" CreationDate="2016-09-09T21:55:54.283" Score="0" ViewCount="430" Body="&lt;p&gt;I have installed Loki 0.4 today and encountered a problem with my wifi. My network is detected and works if I do not protect it with a passphrase, but when I try to use WPA it does not work. When I enter my password the window just disappears and Loki just does not (even try to) connect to my network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any ideas? I haven't tried Ubuntu 16.04 yet so I couldn't tell if it's a base related problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when I run lspci -knn | grep Net -A2 the output is:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;02:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3] (rev 83)&#xA;      Subsystem: Intel Corporation Dual Band Wireless AC 3160 [8086:8470]&#xA;      Kernel driver in use: iwlwifi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT Sep 11 2016:&lt;/strong&gt; I've tried Ubuntu 16.04, same phenomenon. I'll keep on searching for a solution&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-09-11T20:45:32.687" LastActivityDate="2016-09-12T17:20:46.437" Title="Loki - wifi problem Intel 3160 AC - no WPA connection" Tags="|wifi|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7516" PostTypeId="1" CreationDate="2016-09-09T22:18:43.003" Score="1" ViewCount="2916" Body="&lt;p&gt;During the installation routine of Loki there's a prompt to choose whether to install 3rd-party-drivers. If you choose yes, the prompt tells you you have to disable UEFI secure boot because otherwise the 3r-party-drivers cannot be installed. Also, you have to choose a passphrase needed to disable UEFI secure boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm wondering if the disabling is permanent or just a one-time thing for the purpose of installation. Also, the password I chose was never asked for during the installation procedure. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-11T09:45:30.780" Title="Loki installation - 3rd party drivers and UEFI secure boot" Tags="|system-installation|release-loki|uefi|thirdpartyapps|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7517" PostTypeId="1" CreationDate="2016-09-09T22:28:50.737" Score="1" ViewCount="2055" Body="&lt;p&gt;How do I use an exfat-formatted drive, i.e. a flash drive or SD card, with elementary OS? When I try to view it in Files I get an error.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-05-19T02:10:57.123" Title="How do I use exfat drives?" Tags="|files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7518" PostTypeId="2" ParentId="7517" CreationDate="2016-09-09T22:28:50.737" Score="3" Body="&lt;p&gt;Exfat support is not included out of the box due to licensing issues. However, you can manually install support for it from the Terminal.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the Terminal app from the Applications launcher or with &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Type the following command, press &lt;kbd&gt;Enter&lt;/kbd&gt;, then enter your password if prompted:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install exfat-fuse exfat-utils&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Wait for the command to complete, then close and re-open Files to access your drive.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-09-09T22:28:50.737" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7519" PostTypeId="2" ParentId="7509" CreationDate="2016-09-09T22:39:44.143" Score="4" Body="&lt;p&gt;It looks like there is a new version that's been updated for Loki at &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First remove the old PPA as it does not work anymore and could cause problems:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ppa-purge&#xA;sudo ppa-purge ppa:mpstark/elementary-tweaks-daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then add the new PPA and install the current version of Tweaks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp;&#xA;sudo apt update &amp;amp;&amp;amp;&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4254" LastEditorUserId="68" LastEditDate="2016-10-01T23:13:40.110" LastActivityDate="2016-10-01T23:13:40.110" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7521" PostTypeId="1" CreationDate="2016-09-10T01:14:48.943" Score="8" ViewCount="372" Body="&lt;p&gt;I need a couple of older libraries to make a program work. I can hold the packages with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-mark hold package&#xA;echo package hold | dpkg --set-selections&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That way when I try to upgrade the system through &lt;code&gt;apt full-upgrade&lt;/code&gt; the system holds the packages correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if I try to upgrade through the AppCenter, the packages are upgraded despite of the previous orders to &lt;code&gt;apt&lt;/code&gt; and &lt;code&gt;dpkg&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I prevent AppCenter from upgrading certain packages?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6124" LastActivityDate="2018-12-22T09:01:20.253" Title="AppCenter - Prevent packages from updating" Tags="|release-loki|updates|appcenter|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7522" PostTypeId="2" ParentId="7516" CreationDate="2016-09-10T02:00:51.213" Score="1" Body="&lt;p&gt;I haven't reproduced your situation specificaly but I have been trough same condition once on pure Ubuntu. The package that does that on Ubuntu is &quot;mokutil&quot;. If no prompt was shown to you to disable secure boot chances are you already are on &quot;unsecure&quot; mode. It showed to me very early on boot. Probably shown by the BIOS itself. Disabling it is permanent and should pose no real threat. All it does it to allow non signed code to be loaded on boot. If you ever decide to go back to your stock OS you could re-enable it on BIOS after a factory reset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Unified_Extensible_Firmware_Interface#Secure_boot_2&quot; rel=&quot;nofollow&quot;&gt;More information on Secure Boot&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6125" LastActivityDate="2016-09-10T02:00:51.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7524" PostTypeId="2" ParentId="7491" CreationDate="2016-09-10T02:30:37.270" Score="2" Body="&lt;p&gt;I also had this question when I first tried to fix bugs. And really the answer I've found is: It depends on what you're trying to fix. Not every part of elementary OS is compiled the same way and most of the time each project will have files &lt;code&gt;HACKING&lt;/code&gt; or &lt;code&gt;INSTALL&lt;/code&gt; with information about this. In general this is what I've found:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Standalone applications&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may me the most common case, and applies when dealing with applications like Videos, Terminal or Scratch, you compile by using the procedure found on the &lt;code&gt;HACKING&lt;/code&gt; or the &lt;code&gt;INSTALL&lt;/code&gt; file of the project, which is usually (but not always) something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir build&#xA;cd build/&#xA;cmake .. -DCMAKE_INSTALL_PREFIX=/usr&#xA;make&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can run the executable created on the &lt;code&gt;build&lt;/code&gt; directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Switchboard plugs&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These are special because they are developed as shared libraries loaded by Switchboard at runtime, so the output of the build is an .so file and not really an executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For this what I do is install the development version of the plug directly to my system by calling &lt;code&gt;sudo make install&lt;/code&gt; after compiling as before, then call Switchboard either from the terminal or from the Dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I ever mess up and want the stable version of the plug back I will reinstall it using &lt;code&gt;apt-get&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="146" LastActivityDate="2016-09-10T02:30:37.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7526" PostTypeId="2" ParentId="7507" CreationDate="2016-09-10T02:59:51.737" Score="5" Body="&lt;p&gt;The following should install the tool to add apt repositories. Remember that elementary doesn't support or secure these, so they are entirely at your own risk.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common python3-software-properties python-software-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6127" LastEditorUserId="9160" LastEditDate="2017-03-30T06:09:41.550" LastActivityDate="2017-03-30T06:09:41.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7528" PostTypeId="1" CreationDate="2016-09-10T04:31:46.147" Score="6" ViewCount="1642" Body="&lt;p&gt;loving the new OS. Just installed Loki today and have a problem with screen brightness. My screen is at full brightness, which is a pain at night.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a MacBook Pro late 2013 11,3 with dual nvidia, intel graphics&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some steps I've attempted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SYSTEM SETTINGS &gt; POWER &gt; &lt;strong&gt;DISPLAY BRIGHTNESS&lt;/strong&gt; doesn't seem to do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;code&gt;ls /sys/class/backlight&lt;/code&gt; and got a returned result of &lt;code&gt;gmux_backlight&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also attempted adding &lt;code&gt;setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL etc=0&lt;/code&gt; to &lt;code&gt;etc/local.rc&lt;/code&gt; based on another question &amp;amp; response here. But even after reboot, still no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have any trouble shooting ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing, I did not check install 3rd party drivers at setup. Is that part of the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;" OwnerUserId="6131" LastActivityDate="2017-02-13T20:09:16.077" Title="Loki - MBPr 15 - Screen Brightness doesn't work" Tags="|display|release-loki|macbook|brightness|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7529" PostTypeId="1" CreationDate="2016-09-10T04:52:17.120" Score="7" ViewCount="4043" Body="&lt;p&gt;I just installed Loki over my Freya VM that I've been using for the last year and was surprised by the performance difference. It's barely usable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cursor hover, clicks, and keyboard input take up to a second to register. Video output in response to user events happens at similar framerates (such as changing the background, instead of a fade, it's a few choppy frames).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fresh install with plenty of CPU and memory on the host and the exact same VM configuration and host I used for Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect the problem is actually with the &lt;em&gt;video output&lt;/em&gt; rather than the actual input, and processes in the background seem to run at full speed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Host Info&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;macOS 10.11.6&lt;/li&gt;&#xA;&lt;li&gt;16GB RAM&lt;/li&gt;&#xA;&lt;li&gt;3Ghz i7 Dual-Core&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Virtualization Info&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;VirtualBox 5.0.26 w/ Extension Pack&lt;/li&gt;&#xA;&lt;li&gt;2GB RAM&lt;/li&gt;&#xA;&lt;li&gt;I/O APIC, PAX/NX, Nested Paging&lt;/li&gt;&#xA;&lt;li&gt;1 CPU, no Execution Cap&lt;/li&gt;&#xA;&lt;li&gt;128MB Video Memory, 3D Acceleration, Scaled HiDPI (low res)&lt;/li&gt;&#xA;&lt;li&gt;USB 3.0 xHCI Controller (also tried with USB 2.0 EHCI Controller)&lt;/li&gt;&#xA;&lt;li&gt;Guest Utils Installed from VirtualBox virtual CD-ROM Image (DKMS, linux-kernel-headers-generic, build-essential packages installed via apt)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Inline Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Disabled 3D Acceleration in Virtualbox - noticed &lt;em&gt;massive&lt;/em&gt; improvement in responsiveness, confirming(?) my suspicion that the problem lies in the video rendering and not from input lag. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So the real question is why does Loki's 3D VM Accelerated performance suffer so hard in comparison to Freya's?&lt;/p&gt;&#xA;" OwnerUserId="6132" LastActivityDate="2017-01-24T10:27:25.203" Title="Why is Loki's virtualized graphics performance so much worse than Freya's?" Tags="|graphic-drivers|release-loki|virtualbox|virtualization|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7531" PostTypeId="1" CreationDate="2016-09-10T06:46:19.480" Score="6" ViewCount="3080" Body="&lt;p&gt;i don't see any way to change settings for Plank, icon size... Before it was possible by .config,  or Elementary Tweaks.&lt;/p&gt;&#xA;" OwnerUserId="6133" LastEditorUserId="26" LastEditDate="2016-09-11T18:30:10.280" LastActivityDate="2016-09-11T18:30:10.280" Title="How can I access hidden plank settings?" Tags="|settings|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7532" PostTypeId="2" ParentId="7531" CreationDate="2016-09-10T07:09:44.483" Score="6" Body="&lt;p&gt;You can still change them - on any icon on Plank, just do CTRL+RightClick, then proceed to &quot;Preferences&quot;&lt;/p&gt;&#xA;" OwnerUserId="6135" LastActivityDate="2016-09-10T07:09:44.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7533" PostTypeId="1" CreationDate="2016-09-10T07:27:00.927" Score="8" ViewCount="3443" Body="&lt;ol&gt;&#xA;&lt;li&gt;AppCenter is empty, only the installed software is shown.&lt;/li&gt;&#xA;&lt;li&gt;I can't add repositories. I get the message 'sudo: add-apt-repository: command not found'.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt; doesn't work either. I get the message 'E: Unable to locate package software-properties-common'&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="26" LastEditDate="2016-09-18T20:08:06.257" LastActivityDate="2017-04-27T00:57:06.863" Title="No software is shown in AppCenter except what is installed" Tags="|release-loki|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7535" PostTypeId="2" ParentId="7533" CreationDate="2016-09-10T08:03:06.093" Score="3" Body="&lt;p&gt;I had this too. To fix run &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once it's done you can add PPAs after installing &lt;code&gt;software-common-properties&lt;/code&gt;, although this is not recommended to ensure security and stability.&lt;/p&gt;&#xA;" OwnerUserId="6137" LastEditorUserId="26" LastEditDate="2016-09-11T11:40:17.980" LastActivityDate="2016-09-11T11:40:17.980" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7536" PostTypeId="2" ParentId="7505" CreationDate="2016-09-10T08:05:37.360" Score="0" Body="&lt;p&gt;First install the packages for working with PPAs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common ppa-purge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add stable PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And run ppa-purge utility for disabling daily PPA and automatically synchronizing all packages from stable PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ppa-purge ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally upgrade your system and reboot your computer after this steps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-09-10T08:05:37.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7537" PostTypeId="2" ParentId="7507" CreationDate="2016-09-10T08:06:27.133" Score="-1" Body="&lt;p&gt;Make sure to run sudo apt-get update first I had to do this for the software properties to work&lt;/p&gt;&#xA;" OwnerUserId="6137" LastActivityDate="2016-09-10T08:06:27.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7538" PostTypeId="2" ParentId="7486" CreationDate="2016-09-10T08:14:54.200" Score="1" Body="&lt;p&gt;Just installed Loki (elementary OS 0.4.0) and the problem seems to have vanished on its own. Not sure what fixed it, but there was definitely something missing on my Freya installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps a fresh Freya installation could also have fixed it. Nonetheless, it works on Loki. :)&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-09-10T08:14:54.200" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7539" PostTypeId="1" CreationDate="2016-09-10T08:33:12.350" Score="3" ViewCount="990" Body="&lt;p&gt;Is it possible to change the date format shown in the panel? The menu (&lt;code&gt;wingpanel&lt;/code&gt;) currently shows &quot;Sat, Sep 10&quot; and I'd like it to show &quot;Sat, 10 Sep&quot;. I'm using the newly released Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried following older answers to similar questions, but I don't see the options in the &lt;code&gt;dconf-editor&lt;/code&gt; that are suggested.&lt;/p&gt;&#xA;" OwnerUserId="6139" LastEditorUserId="5565" LastEditDate="2016-10-04T07:57:28.923" LastActivityDate="2016-11-03T08:38:27.067" Title="Is it possible to change the date format shown in Loki's menu bar?" Tags="|release-loki|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7540" PostTypeId="2" ParentId="7200" CreationDate="2016-09-10T09:03:53.550" Score="0" Body="&lt;p&gt;Use Systemback to create your system iso image.&#xA;See here: &lt;a href=&quot;http://www.istitutomajorana.it/index.php?option=com_content&amp;amp;task=view&amp;amp;id=2309&amp;amp;Itemid=33&quot; rel=&quot;nofollow&quot;&gt;http://www.istitutomajorana.it/index.php?option=com_content&amp;amp;task=view&amp;amp;id=2309&amp;amp;Itemid=33&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6141" LastEditorUserId="26" LastEditDate="2016-09-10T18:02:56.633" LastActivityDate="2016-09-10T18:02:56.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7541" PostTypeId="2" ParentId="7531" CreationDate="2016-09-10T09:11:09.360" Score="4" Body="&lt;p&gt;Its hard to rightclick to get the preference. You can do it from the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5862" LastActivityDate="2016-09-10T09:11:09.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7542" PostTypeId="1" AcceptedAnswerId="7574" CreationDate="2016-09-10T09:14:10.790" Score="36" ViewCount="127413" Body="&lt;p&gt;In the latest version (Loki 0.4 Stable), I can't open .deb files with AppCenter, like Ubuntu.&lt;/p&gt;&#xA;" OwnerDisplayName="user6142" LastEditorUserId="26" LastEditDate="2016-09-11T18:18:21.030" LastActivityDate="2019-05-09T17:07:36.107" Title="How can I install .deb files in Loki?" Tags="|release-loki|appcenter|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7543" PostTypeId="2" ParentId="7542" CreationDate="2016-09-10T09:56:16.347" Score="3" Body="&lt;p&gt;You can use command &lt;strong&gt;dpkg&lt;/strong&gt; in terminal to install .deb files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usage: &lt;strong&gt;sudo dpkg --install&lt;/strong&gt; &lt;em&gt;/path/to/deb/file.deb&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="6144" LastActivityDate="2016-09-10T09:56:16.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7544" PostTypeId="1" AcceptedAnswerId="7695" CreationDate="2016-09-09T22:57:58.193" Score="1" ViewCount="1962" Body="&lt;p&gt;I am using elementary OS which is based on Ubuntu Linux. I would like to change my fonts everywhere text is displayed on OS. Is there a way to do it, or am I too hopeful?&lt;/p&gt;&#xA;" OwnerUserId="5597" OwnerDisplayName="brijs" LastActivityDate="2016-09-12T19:23:59.747" Title="Change fonts everywhere in OS" Tags="|ubuntu|fonts|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7545" PostTypeId="1" CreationDate="2016-09-10T10:48:46.880" Score="9" ViewCount="2488" Body="&lt;p&gt;I have installed Loki this morning (it's awesome !).&#xA;Everything works perfectly expect my Trackpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Configuration&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Macbook Air (6.2 from 2013).&lt;/li&gt;&#xA;&lt;li&gt;OS : ElementaryOS Loki&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The trackpad/touchpad randomly freezes. I move my finger on the trackpad then suddenly it freezes, I have to remove my finger from the trackpad to unfreeze it.&lt;/li&gt;&#xA;&lt;li&gt;I do not have any problem when I use a mouse&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My research&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;It seems that elementaryOS uses libinput as a driver instead of synaptic.&lt;/li&gt;&#xA;&lt;li&gt;The trackpad works perfectly on Ubuntu 16.04 but the driver is synaptic. &lt;/li&gt;&#xA;&lt;li&gt;Libinput seems guilty...&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Questions&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Have you ever face a similar problem?&lt;/li&gt;&#xA;&lt;li&gt;Do you have any idea to solve my issue?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="6145" LastActivityDate="2019-01-02T23:15:16.260" Title="Trackpad randomly freezes" Tags="|release-loki|touchpad|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7546" PostTypeId="1" CreationDate="2016-09-10T11:02:53.307" Score="5" ViewCount="11736" Body="&lt;p&gt;I have just installed LOKI in two PCs and I am having the same issue with both.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On App Center I can see the apps list; however when I choose any of them, click Install and I can see the progress bar, but nothing more happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note that after install I managed to install sucessfully with App Center a few tools; However I disabled the Guest account and since then I can't install anything.&#xA;I tried to reboot several times and to enable again the Guest Account - however the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additional info: Default language is PT-pt, but this change was one of the firsts - after change language I managed to install a few tools.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TIA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Carlos&lt;/p&gt;&#xA;" OwnerUserId="6146" LastActivityDate="2016-11-21T09:06:06.097" Title="AppCenter does not install anything anymore" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="9" ClosedDate="2016-10-02T22:34:09.057" ContentLicense="CC BY-SA 3.0" />
  <row Id="7547" PostTypeId="1" AcceptedAnswerId="7622" CreationDate="2016-09-10T11:40:23.787" Score="1" ViewCount="3862" Body="&lt;p&gt;How can i set windows control buttons to be windows style (minimize, maximize, close) via command line? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried:&lt;/p&gt; &#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it works for Firefox but it doesn't affect elementary OS apps like Files, Music, etc..&lt;/p&gt;&#xA;" OwnerUserId="5899" LastEditorUserId="308" LastEditDate="2018-08-07T18:05:42.430" LastActivityDate="2022-03-20T21:48:16.207" Title="Change window control buttons under Loki" Tags="|release-loki|window-management|user-interface|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-02T14:29:03.267" ContentLicense="CC BY-SA 4.0" />
  <row Id="7548" PostTypeId="2" ParentId="7472" CreationDate="2016-09-10T11:45:49.283" Score="12" Body="&lt;p&gt;I don't have dual graphics, but I do have a Haswell based machine with a GTX 960. I installed the release version of Loki and had slow, stuttering Nouveau graphics even though I had selected to install proprietary drivers during installation. This is what I did to fix it, afterwards I had fully accelerated binary drivers from Nvidia and a smooth, fast desktop experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and type &lt;code&gt;sudo ubuntu-drivers list&lt;/code&gt;. You should see the Nvidia driver version that matches your card listed. If so, type &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; and the system will install the correct driver and any needed dependencies. Reboot, and you should have the correct driver installed. Note that your boot splash screen will be replaced with boot messages in a low resolution, however once the display manager loads you'll have fully accelerated graphics. &lt;/p&gt;&#xA;" OwnerUserId="6147" LastActivityDate="2016-09-10T11:45:49.283" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7549" PostTypeId="1" CreationDate="2016-09-10T11:59:00.867" Score="0" ViewCount="296" Body="&lt;p&gt;When using &lt;code&gt;sudo apt-get update&lt;/code&gt; in order to install grive-tools to elementary, I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://ppa.launchpad.net/thefanclub/grive-tools/ubuntu xenial Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://ppa.launchpad.net/thefanclub/grive-tools/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Am I being stupid? I got it to work perfectly with Freya.&lt;/p&gt;&#xA;" OwnerUserId="5996" LastActivityDate="2016-10-06T18:07:52.307" Title="Trouble installing Grive tools on Loki" Tags="|applications|release-loki|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7550" PostTypeId="1" CreationDate="2016-09-10T11:59:11.123" Score="11" ViewCount="14692" Body="&lt;p&gt;I got a red circle with a crossed red line instead of Dropbox icon.&lt;/p&gt;&#xA;" OwnerUserId="6148" LastEditorUserId="242" LastEditDate="2016-12-30T06:47:42.313" LastActivityDate="2018-06-04T23:04:55.287" Title="Dropbox icon missing in Loki" Tags="|wingpanel|icons|dropbox|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7552" PostTypeId="2" ParentId="7542" CreationDate="2016-09-10T12:40:58.207" Score="4" Body="&lt;p&gt;You can use &lt;strong&gt;gdebi&lt;/strong&gt; app. Install it first from your Terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gdebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then use gdebi to install the .deb file&lt;/p&gt;&#xA;" OwnerUserId="5200" LastEditorUserId="5200" LastEditDate="2016-09-13T08:13:37.977" LastActivityDate="2016-09-13T08:13:37.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7553" PostTypeId="1" AcceptedAnswerId="7556" CreationDate="2016-09-10T12:43:19.237" Score="2" ViewCount="3934" Body="&lt;p&gt;How can I change Terminal opacity in Loki? I have tried to change the font using dconf editor and it's work. But I couldn't do it for the opacity.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help. Thanks&lt;/p&gt;&#xA;" OwnerUserId="5200" LastActivityDate="2016-09-10T14:56:13.363" Title="How to change Terminal opacity in Loki?" Tags="|pantheon-terminal|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7555" PostTypeId="1" CreationDate="2016-09-10T13:39:32.833" Score="6" ViewCount="1467" Body="&lt;p&gt;It seems Dropbox is not really compatible with Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dropbox runs but the icon does not show in slingshot even when using the trick we used in Freya:&#xA;&lt;em&gt;env XDG_CURRENT_DESKTOP=Unity dropbox start&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there are no Dropbox icons nor Dropbox menu in Files !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to fix this ?&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2017-01-15T03:39:43.337" Title="Loki and Dropbox" Tags="|slingshot|files|" AnswerCount="3" CommentCount="0" ClosedDate="2016-09-25T15:50:36.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="7556" PostTypeId="2" ParentId="7553" CreationDate="2016-09-10T14:56:13.363" Score="2" Body="&lt;p&gt;If you want to change it using an rgba color set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, suppose you want to use solarized bg color. That has an hex value of #002b36, according to the &lt;a href=&quot;http://ethanschoonover.com/solarized&quot; rel=&quot;nofollow&quot;&gt;official website&lt;/a&gt;, so it's equivalent is rgba(0,43,54,.95) which defines the same color with an opacity of .95. You can use the converter of your preference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, with dconf editor you should use the rgba value in the background option.&lt;/p&gt;&#xA;" OwnerUserId="4926" LastActivityDate="2016-09-10T14:56:13.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7557" PostTypeId="1" CreationDate="2016-09-10T14:57:26.823" Score="1" ViewCount="77" Body="&lt;p&gt;I followed the steps in &lt;a href=&quot;https://help.ubuntu.com/12.04/ubuntu-help/power-hibernate.html&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/12.04/ubuntu-help/power-hibernate.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can hibernate from the command line, but there’s still no entry in the power menu for hibernation.&lt;/p&gt;&#xA;" OwnerUserId="5844" LastActivityDate="2016-09-10T14:57:26.823" Title="How to enable hibernation in panel on Luna?" Tags="|wingpanel|luna|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T01:36:32.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="7560" PostTypeId="1" AcceptedAnswerId="7585" CreationDate="2016-09-10T15:40:50.613" Score="-1" ViewCount="1586" Body="&lt;p&gt;What is the easiest way to install LAMP server for hosting PHP projects?&#xA;Previously on windows I used a XAMPP server. I have tried LAMP on LinuxMint, but the installation required to configure lot of files. So is there a small and easy way to do it, it would be great.&lt;/p&gt;&#xA;" OwnerUserId="6153" LastActivityDate="2016-09-10T20:31:26.670" Title="Steps to install LAMP or XAMPP with phpmyadmin" Tags="|php|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7561" PostTypeId="1" AcceptedAnswerId="7621" CreationDate="2016-09-10T15:46:29.630" Score="1" ViewCount="10415" Body="&lt;p&gt;I'm new to the world of Linux though I was really impressed by Elementary OS and I want to install it on my Lenovo y580 laptop dual booting it with windows 10. I have two disks on it, SSD where Windows is installed and HDD. The problem is, I don't want Elementary to be installed on my SSD. How would you suggest to partition my drives to achieve that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what Disk Management on Windows is showing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bmZlv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bmZlv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6155" LastActivityDate="2019-01-03T09:39:46.383" Title="Partitioning drives before installing Loki" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7562" PostTypeId="2" ParentId="7545" CreationDate="2016-09-10T15:57:58.070" Score="2" Body="&lt;p&gt;switch to the synaptic driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then force the synaptics driver to load, achieved by putting the synaptic config file into X11 directory for customisation&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /etc/X11/xorg.conf.d&#xA;sudo cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /etc/X11/xorg.conf.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="280" LastEditorUserId="5638" LastEditDate="2016-11-21T09:05:46.927" LastActivityDate="2016-11-21T09:05:46.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7563" PostTypeId="1" CreationDate="2016-09-10T16:06:25.277" Score="1" ViewCount="516" Body="&lt;p&gt;Mobile Broadband is missing in network manager. Hardware is not detected. Updating kernel brings it partially back and makes configuration possible, but does not provide a selection option in network manager. Is there any specific reason for this?&lt;/p&gt;&#xA;" OwnerUserId="6156" LastEditorUserId="3955" LastEditDate="2016-09-18T19:57:15.973" LastActivityDate="2016-09-18T19:57:15.973" Title="Mobile Broadband missing in Loki" Tags="|release-loki|networking|internet|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-05T19:25:33.853" ContentLicense="CC BY-SA 3.0" />
  <row Id="7564" PostTypeId="2" ParentId="7561" CreationDate="2016-09-10T16:36:08.543" Score="1" Body="&lt;p&gt;If your Windows is installed on the SSD that means the Disk 0 is the SSD. You have unallocated space in the SSD. If you install elementary now it will get installed in that 23 GB space; in the SSD. You should expand your C drive back to its original size and partition the F drive which looks to be the hard drive to create the space for elementary.  That's a start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't really know how to install a distro in a drive other than the system but I assume the general procedure would be the same. &lt;/p&gt;&#xA;" OwnerUserId="6160" LastActivityDate="2016-09-10T16:36:08.543" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7565" PostTypeId="1" CreationDate="2016-09-10T17:02:46.573" Score="0" ViewCount="167" Body="&lt;p&gt;I've used Elementary OS Freya for years now, And me and my whole family used an instant messenger called Trillian, And now switching to Loki it won't install. to that I say WTF, why can't we install Trillian on Elementary os Loki? &lt;/p&gt;&#xA;" OwnerUserId="6161" LastActivityDate="2016-09-11T21:37:13.323" Title="Trillian instant messenenger won't install on the new elementary!" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-25T15:54:49.967" ContentLicense="CC BY-SA 3.0" />
  <row Id="7566" PostTypeId="2" ParentId="7528" CreationDate="2016-09-10T17:33:30.503" Score="1" Body="&lt;p&gt;This code works for me, same might help you.. give a try!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -set 15&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;15 is the percentage of backlight you gonna use. You can change any percentage value according to your need.&lt;/p&gt;&#xA;" OwnerUserId="6163" LastEditorUserId="26" LastEditDate="2016-09-10T18:29:29.863" LastActivityDate="2016-09-10T18:29:29.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7567" PostTypeId="1" CreationDate="2016-09-10T17:39:37.667" Score="2" ViewCount="142" Body="&lt;p&gt;Everytime I try to open &quot;Sharing&quot; it closes the Settings window. Is there any command to open this page so I can debug the problem?&lt;/p&gt;&#xA;" OwnerUserId="6164" LastActivityDate="2016-09-14T17:57:08.550" Title="Can not set &quot;Sharing&quot; in Loki final release" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7569" PostTypeId="2" ParentId="7567" CreationDate="2016-09-10T17:56:15.113" Score="2" Body="&lt;p&gt;I had the same problem but today with an update there came a fix for this.&#xA;After the update of the package 'switchboard-plug-sharing' it works.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastEditorUserId="26" LastEditDate="2016-09-14T17:57:08.550" LastActivityDate="2016-09-14T17:57:08.550" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7570" PostTypeId="1" AcceptedAnswerId="7573" CreationDate="2016-09-10T18:03:24.857" Score="2" ViewCount="102" Body="&lt;p&gt;I know Loki is out there and I already have installed that on my laptop. But, for sake of old PCs performance I want to keep last version of Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I get the magnet link? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please do share both 32 and 64 bit versions. Also, it might be last chance for 32bit devices to enjoy elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="572" LastActivityDate="2016-09-10T18:09:31.527" Title="From where do I get elementary Freya?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7571" PostTypeId="2" ParentId="7510" CreationDate="2016-09-10T18:05:49.017" Score="1" Body="&lt;p&gt;Updates can be found and handled in AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Packages sources modifications are difficult by default for security, the #1 cause of issues last release was PPAs, followed by hardware.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-10T18:05:49.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7572" PostTypeId="2" ParentId="7189" CreationDate="2016-09-10T18:08:41.330" Score="3" Body="&lt;p&gt;You can install .deb files with apt in terminal with...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install ./filename.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in the folder of your .deb file open a terminal with mouse right click. &#xA;&lt;em&gt;Open in &gt; Terminal&lt;/em&gt; and use this command above.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastEditorUserId="26" LastEditDate="2016-09-10T18:30:23.447" LastActivityDate="2016-09-10T18:30:23.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7573" PostTypeId="2" ParentId="7570" CreationDate="2016-09-10T18:09:31.527" Score="1" Body="&lt;p&gt;Since Ashrise tracks their torrents, you can technically download them &lt;a href=&quot;https://ashrise.com/torrents&quot; rel=&quot;nofollow&quot;&gt;there&lt;/a&gt;. There is no official source, as proper support for a release pretty much ends when a new one is made.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-10T18:09:31.527" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7574" PostTypeId="2" ParentId="7542" CreationDate="2016-09-10T18:12:50.637" Score="57" Body="&lt;h3&gt;Use Eddy (the recommended, graphical, elementary way)&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/13235/26&quot;&gt;Read this other answer&lt;/a&gt; about using Eddy, which can be &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy&quot; rel=&quot;noreferrer&quot;&gt;installed in AppCentre&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Use &lt;code&gt;gdebi-cli&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gdebi package.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Use &lt;code&gt;gdebi&lt;/code&gt; GUI&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gdebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open the package using &lt;code&gt;gdebi&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Use &lt;code&gt;apt&lt;/code&gt; (the proper cli way)&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ./package.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Use &lt;code&gt;dpkg&lt;/code&gt; (the way that doesn't resolve dependencies)&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i package.deb&#xA;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that attempting to install a .deb that is inside an .iso can cause errors, so you may want to copy it to your downloads folder.&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="13848" LastEditDate="2018-03-16T18:04:21.950" LastActivityDate="2018-03-16T18:04:21.950" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7576" PostTypeId="1" CreationDate="2016-09-10T18:23:56.260" Score="0" ViewCount="333" Body="&lt;p&gt;Loki wasnt recognizing two of my montiors. I managed to fix that through installing the NVIDIA Driver for my card, but now those two monitors dont have a correct resolution and i cant set it up to be higher as 768p. Those two also get displayed as &quot;Unknown display&quot; in my System Settings -&gt; Displays. They show up as DFP-0 and DFP-4 in nvidia-settings but my working one is showing up properly. &lt;/p&gt;&#xA;" OwnerUserId="6167" LastActivityDate="2016-09-21T06:14:49.583" Title="Problems running three monitors with Loki" Tags="|display|nvidia|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7577" PostTypeId="1" CreationDate="2016-09-10T19:21:45.597" Score="1" ViewCount="1876" Body="&lt;p&gt;system-config-samba used to work in Freya, but it isn't now, here is the error message:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;(system-config-samba:17094): Gtk-WARNING **: 無法在 module_path 中找出佈景主題引擎：‘pixmap’，&lt;/p&gt;&#xA;&lt;p&gt;(system-config-samba:17094): Gtk-WARNING **: 無法在 module_path 中找出佈景主題引擎：‘pixmap’，&lt;/p&gt;&#xA;&lt;p&gt;(system-config-samba:17094): Gtk-WARNING **: 無法在 module_path 中找出佈景主題引擎：‘pixmap’，&lt;/p&gt;&#xA;&lt;p&gt;(system-config-samba:17094): Gtk-WARNING **: 無法在 module_path 中找出佈景主題引擎：‘pixmap’，&lt;/p&gt;&#xA;&lt;p&gt;Traceback (most recent call last):&lt;/p&gt;&#xA;&lt;p&gt;File &amp;quot;/usr/sbin/system-config-samba&amp;quot;, line 45, in &lt;/p&gt;&#xA;&lt;p&gt;mainWindow.MainWindow(debug_flag)&lt;/p&gt;&#xA;&lt;p&gt;File &amp;quot;/usr/share/system-config-samba/mainWindow.py&amp;quot;, line 121, in &lt;strong&gt;init&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;self.basic_preferences_win = basicPreferencesWin.BasicPreferencesWin(self, self.xml, self.samba_data, self.samba_backend, self.main_window)&lt;/p&gt;&#xA;&lt;p&gt;File &amp;quot;/usr/share/system-config-samba/basicPreferencesWin.py&amp;quot;, line 97, in &lt;strong&gt;init&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;self.admin = libuser.admin()&lt;/p&gt;&#xA;&lt;p&gt;SystemError: could not open configuration file `/etc/libuser.conf': No such file or directory.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="703" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-02-21T10:54:27.847" Title="Is thera a GUI tool for setting up the samba server?" Tags="|release-loki|samba|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7579" PostTypeId="1" CreationDate="2016-09-10T20:01:07.263" Score="8" ViewCount="2463" Body="&lt;p&gt;What is the end support date for Loki? Will Loki follow Ubuntu's support dates?&lt;/p&gt;&#xA;" OwnerUserId="6171" LastEditorUserId="5565" LastEditDate="2016-10-08T21:17:30.163" LastActivityDate="2016-10-08T21:17:30.163" Title="When will Loki support end? (What date?)" Tags="|release-loki|updates|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7580" PostTypeId="2" ParentId="7579" CreationDate="2016-09-10T20:03:05.073" Score="3" Body="&lt;p&gt;I guess it will have updates until next elementary OS release (0.5) but the backend (Ubuntu) will keep updating until EOL, which is IIRC in 2021&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-10T20:03:05.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7581" PostTypeId="2" ParentId="7550" CreationDate="2016-09-10T20:08:21.343" Score="11" Body="&lt;p&gt;Dropbox does not recognize Elementary's desktop interface. Therefore, it does not know which icon set to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This script has been designed for Elementary OS and I really can recommend it: &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, you can try running the following commands to use Unity's icon set.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dropbox stop&#xA;&#xA;DROPBOX_USE_LIBAPPINDICATOR=1 XDG_CURRENT_DESKTOP=Unity \&#xA;dropbox start -i&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this works, you can edit the desktop file located in /usr/share/applications. Open the file with your favourite text editor and change the line &lt;code&gt;Exec=dropbox start -i&lt;/code&gt; to &lt;code&gt;Exec=DROPBOX_USE_LIBAPPINDICATOR=1 XDG_CURRENT_DESKTOP=Unity dropbox start -i&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Got it from here: &lt;a href=&quot;https://unix.stackexchange.com/questions/198977/dropbox-tray-icon-doesnt-show-up-in-elementary-os-luna-freya&quot;&gt;https://unix.stackexchange.com/questions/198977/dropbox-tray-icon-doesnt-show-up-in-elementary-os-luna-freya&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5045" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-09-10T20:22:18.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7583" PostTypeId="1" CreationDate="2016-09-10T20:11:12.660" Score="2" ViewCount="267" Body="&lt;p&gt;I tried installing bumblebee on Elementary OS Loki, but without luck. Can anybody help me with this? I would like the better battery life and the better graphics when needed.&#xA;I have a GTX 970M.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5045" LastActivityDate="2016-09-10T20:11:12.660" Title="Installing bumblebee in Loki" Tags="|release-loki|nvidia|bumblebee|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-18T22:02:04.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="7585" PostTypeId="2" ParentId="7560" CreationDate="2016-09-10T20:31:26.670" Score="2" Body="&lt;p&gt;This is not the site to be asking that question as it is not related to elementary OS itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To answer your question: The easiest way is to download Apache, PHP, MySQL || MariaDB and PHPMyAdmin directly from the repos. This can be easily achieved by typing &lt;code&gt;sudo apt install php5 mariadb-server phpmyadmin&lt;/code&gt; in the terminal. This is the easiest and more customizable way to this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For further reference &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mysql-php-lamp-stack-on-ubuntu-14-04&quot; rel=&quot;nofollow&quot;&gt;take a look at this Digital Ocean article&lt;/a&gt; on how to setup LAMP on Ubuntu enviroments.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-10T20:31:26.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7586" PostTypeId="2" ParentId="2504" CreationDate="2016-09-10T20:56:57.523" Score="1" Body="&lt;p&gt;I just had this same problem, and the way I solved it was simple.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I imported the files in the ~/Music folder from an external drive with an ntfs filesystem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the database that was created was still linking to the external drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this was very easy.  If you are comfortable with terminal use, do the following (or use the Files app to open HOME and show hidden files.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, close noise. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/.local/share/noise &#xA;rm database_0_3_1.db&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can now exit the terminal, and start Noise again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If all of the files are already in Music, then just allow noise to import them, and you should be able to play them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I am pretty certain that there is no need to reinstall the restricted-extras package, unless of course you didn't install it when you were installing elementary for the first time.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastEditorUserId="26" LastEditDate="2016-09-11T13:13:54.177" LastActivityDate="2016-09-11T13:13:54.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7587" PostTypeId="1" CreationDate="2016-09-10T21:15:05.833" Score="7" ViewCount="21212" Body="&lt;p&gt;How do I access the additional hardware/drivers menu in Loki?&lt;br&gt;&#xA;Am I missing something or was this GUI option removed?&lt;/p&gt;&#xA;" OwnerUserId="6174" LastEditorUserId="242" LastEditDate="2016-09-15T18:00:06.243" LastActivityDate="2018-09-08T17:40:52.187" Title="Loki, additional hardware" Tags="|settings|release-loki|hardware|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7588" PostTypeId="1" CreationDate="2016-09-10T21:23:47.443" Score="1" ViewCount="142" Body="&lt;p&gt;How can I disable tap-to-click in the greeter/login screen of elementaryOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that I can disable tap-to-click on a desktop of a user in the settings dialogue of mouse and touchpad. In the command line this is done using e.g. gsettings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as a user tap-to-click is disabled for my users and I can check that with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.gnome.settings-daemon.peripherals.touchpad tap-to-click&#xA;false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But I fail doing it for the greeter having an annoying behaviour of the UI when typing in passwords.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I found that &#xA;&lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-mouse-touchpad/+bug/1605247&quot; rel=&quot;nofollow&quot;&gt;my question here duplicates this launchpad bug.&lt;/a&gt;. &lt;del&gt;However, may be someone finds a workaround faster than me ;)&lt;/del&gt; However, I upgraded to Loki, but am still somehow interested in finding how to change the tapping behaviour in the greeter.&lt;/p&gt;&#xA;" OwnerUserId="6170" LastEditorUserId="6170" LastEditDate="2016-09-18T13:06:27.257" LastActivityDate="2016-09-18T13:06:27.257" Title="Disable tap-to-click on login screen" Tags="|release-freya|release-loki|greeter|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7590" PostTypeId="2" ParentId="7561" CreationDate="2016-09-10T22:16:24.400" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Thanks I'll try that. When I'll install elementary should i choose 'Install alongside Windows' or 'something else'?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I would recommend choosing &lt;strong&gt;Something Else&lt;/strong&gt;. That's the only way you can ensure the OS isn't going to be installed on your SSD. If you get confused with the options in the &lt;strong&gt;Something Else&lt;/strong&gt; section, you can research it. If you don't the options in that section, I believe you have the option to go back and choose another option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="5799" LastActivityDate="2016-09-10T22:16:24.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7591" PostTypeId="1" CreationDate="2016-09-10T22:32:34.087" Score="1" ViewCount="169" Body="&lt;p&gt;Title says it all... When I have AbiWord opened in a document, the top of the document blinks. I've tried not having the app maximized, moving it to another monitor... no joy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I've never used AbiWord, I don't know if this is a bug in the app or a problem with Loki or my hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using an Asus 1015E netbook, dual-core Celeron 847 @ 1.10 GHz with 2 GB RAM (although Loki only reports 1.3 GB; I don't know why). My second monitor is an Asus 22&quot; monitor connected through the VGA port in the side of the netbook.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas, thoughts, or comments?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5799" LastEditorUserId="6165" LastEditDate="2016-09-13T18:14:27.683" LastActivityDate="2016-09-13T18:14:27.683" Title="AbiWord - Top of the document blinks in Loki" Tags="|applications|release-loki|hardware|display|" AnswerCount="0" CommentCount="2" ClosedDate="2016-11-23T11:35:07.670" ContentLicense="CC BY-SA 3.0" />
  <row Id="7592" PostTypeId="2" ParentId="7208" CreationDate="2016-09-10T22:40:57.063" Score="1" Body="&lt;p&gt;It took me awhile to get around to resolving this, but in the end, I just backed up my documents and made a list of apps I had installed, then wiped the drive and installed Freya, choosing &lt;em&gt;not&lt;/em&gt; to encrypt the drive when given the option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the input, all!&lt;/p&gt;&#xA;" OwnerUserId="5799" LastActivityDate="2016-09-10T22:40:57.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7594" PostTypeId="2" ParentId="2504" CreationDate="2016-09-10T23:00:40.407" Score="0" Body="&lt;p&gt;I have had this issue myself.  My music data was stored on a seperate HDD within my computer.  Every time I power on my computer I have to open the main directory of that drive in the 'Files' application.  &lt;/p&gt;&#xA;" OwnerUserId="6174" LastActivityDate="2016-09-10T23:00:40.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7596" PostTypeId="1" CreationDate="2016-09-10T23:45:18.600" Score="1" ViewCount="542" Body="&lt;p&gt;Upon installing Loki today and re-setting up my system I imported my music to the native music app and was toying around with editing meta data for my music.  I soon realized that in Loki I was unable to edit genres for multiple songs by highlighting multiple songs and selecting edit.  Yesterday(Freya) I was able to.  Does anyone know if this is a glitch or a feature removed on purpose??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="6174" LastActivityDate="2016-09-10T23:45:18.600" Title="Loki Music Application" Tags="|release-loki|music|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7597" PostTypeId="2" ParentId="4725" CreationDate="2016-09-11T01:29:25.660" Score="1" Body="&lt;p&gt;Okay, at the risk of being considered rude, I need to ask why coderMess decided to not answer the user's question, but instead offer up advice on using another piece of software.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sure, you can use VLC, but what if you don't want to?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And why bother answering a question with the advice of using different software?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If we want this whole thing to work, we have to let the developers know about these bugs, not just tell someone to use something else.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2016-09-11T01:29:25.660" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7598" PostTypeId="2" ParentId="7219" CreationDate="2016-09-11T02:26:45.727" Score="1" Body="&lt;p&gt;Sophos does a good job detecting both windows and linux malware &lt;a href=&quot;https://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-linux.aspx&quot; rel=&quot;nofollow&quot;&gt;https://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-linux.aspx&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6180" LastActivityDate="2016-09-11T02:26:45.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7600" PostTypeId="1" CreationDate="2016-09-11T04:55:54.317" Score="1" ViewCount="58" Body="&lt;p&gt;As you can see, the text size of qbittorrent is smaller than Pantheon-Files, although I have set the text size to large.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u4z2t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u4z2t.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-09-11T04:55:54.317" Title="The text size of Qt apps doesn't change by setting the text size in &quot;System Settings -&gt; Universal Access -&gt; Display -&gt; Text Size&quot;" Tags="|settings|" AnswerCount="0" CommentCount="0" ClosedDate="2016-11-23T11:36:12.423" ContentLicense="CC BY-SA 3.0" />
  <row Id="7602" PostTypeId="1" CreationDate="2016-09-11T04:56:41.233" Score="1" ViewCount="26" Body="&lt;p&gt;How can I download an image for i386 while connecting from amd64 host?&#xA;I get link only for amd64 image.&lt;/p&gt;&#xA;" OwnerUserId="6182" LastActivityDate="2016-09-11T04:56:41.233" Title="Download for another system" Tags="|download|iso|" AnswerCount="0" CommentCount="0" ClosedDate="2016-09-11T13:09:36.193" ContentLicense="CC BY-SA 3.0" />
  <row Id="7606" PostTypeId="2" ParentId="7509" CreationDate="2016-09-11T06:03:11.450" Score="-2" Body="&lt;p&gt;@ Jason Lucero,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I too was bummed that there were no basic dock configuration settings. I installed dconf-editor and found several settings to tweaks available. As you can see from the screen shot, I downsized the icons to 40px, justified the dock to the left side, changed the theme**, and enabled pressure reveal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h0brt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/h0brt.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;** - I somehow recall liking the theme &quot;Matte&quot; from tinkering with elementary years ago, as I prefer a launcher/dock/bar/whatever with a background of more contrast. I just blindly entered it into dconf and it adjusted accordingly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed when I went in to ~/.config/plank/dock1 there was no &quot;settings&quot; text file like there was before. Previously this was available as a means to quickly adjust some dock-specific settings. While this is, for some reason, not found in Loki, at &lt;em&gt;least&lt;/em&gt; the dconf entries exist in dconf-editor. :D&lt;/p&gt;&#xA;" OwnerUserId="6186" LastActivityDate="2016-09-11T06:03:11.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7609" PostTypeId="2" ParentId="7512" CreationDate="2016-09-11T08:02:58.343" Score="2" Body="&lt;p&gt;Open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt; (and put in your password when asked)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This updates the software repositories of elementary OS. Then reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AppCenter will now have all the software available to Loki.&lt;/p&gt;&#xA;" OwnerUserId="100" LastEditorUserId="26" LastEditDate="2016-09-18T20:07:39.947" LastActivityDate="2016-09-18T20:07:39.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7610" PostTypeId="1" AcceptedAnswerId="9886" CreationDate="2016-09-11T08:04:34.150" Score="0" ViewCount="664" Body="&lt;p&gt;I installed VMWare Tools in ElementaryOS 0.4 but some features seem missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shared Folders work perfectly but my mouse is restricted in the virtual machine and I can't drag &amp;amp; drop any files from host to guest.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="6188" LastActivityDate="2018-02-21T14:01:07.770" Title="Problem with VMWare Tools drag &amp; drop" Tags="|virtualization|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7611" PostTypeId="1" AcceptedAnswerId="7615" CreationDate="2016-09-11T08:12:17.330" Score="13" ViewCount="36428" Body="&lt;p&gt;I'm keen to instal this newest release from elementary OS. Unfortunately, I don't get an option to choose between 32 or 64 bit upon download. Does this mean that 32-bit support is dropped altogether? I cannot find the answer on the official pages from elementary.&lt;/p&gt;&#xA;" OwnerUserId="2620" LastActivityDate="2017-04-15T10:34:01.603" Title="Does elementary 0.4 loki supports 32-bit?" Tags="|release-loki|hardware|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7612" PostTypeId="2" ParentId="7576" CreationDate="2016-09-11T08:14:19.120" Score="-1" Body="&lt;p&gt;I had the same problem when using driver nvidia-304 after I installed the driver nvidia-361 the problem solved&lt;/p&gt;&#xA;" OwnerUserId="6189" LastActivityDate="2016-09-11T08:14:19.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7613" PostTypeId="1" CreationDate="2016-09-11T08:26:03.557" Score="1" ViewCount="369" Body="&lt;p&gt;It will freeze for awhile if I try to reply the mail, and the page will become black if I click on it, it is almost unusable when it happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the situation:&#xA;&lt;a href=&quot;https://youtu.be/nyVBgHdSgEc&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/nyVBgHdSgEc&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-09-11T09:04:48.627" LastActivityDate="2016-09-11T09:04:48.627" Title="What happens to pantheon-mail?" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7615" PostTypeId="2" ParentId="7611" CreationDate="2016-09-11T08:52:11.187" Score="9" Body="&lt;p&gt;No, there is no 32-bit iso. Only 64bit.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-09-11T08:52:11.187" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7616" PostTypeId="2" ParentId="7549" CreationDate="2016-09-11T09:00:31.990" Score="1" Body="&lt;p&gt;Freya is based on Ubuntu &lt;strong&gt;14.04&lt;/strong&gt; and loki on &lt;strong&gt;16.04&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like there is &lt;a href=&quot;https://launchpad.net/~thefanclub/+archive/ubuntu/grive-tools&quot; rel=&quot;nofollow&quot;&gt;no version of Grive-Tools for 16.04&lt;/a&gt; based distributions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe you can take a look at &lt;a href=&quot;https://www.insynchq.com/&quot; rel=&quot;nofollow&quot;&gt;Insync&lt;/a&gt; or &lt;a href=&quot;https://www.thefanclub.co.za/overgrive/installation-instructions-ubuntu&quot; rel=&quot;nofollow&quot;&gt;overgrive&lt;/a&gt; instead.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastEditorUserId="6165" LastEditDate="2016-10-06T18:07:52.307" LastActivityDate="2016-10-06T18:07:52.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7617" PostTypeId="1" CreationDate="2016-09-11T09:37:23.103" Score="1" ViewCount="72" Body="&lt;p&gt;yesterday I installed Loki in my VirtualBox. Like with Freya and Luna, I could not use full screen or copy/paste from windows with the clean install, so I tried to install the guestAdditions. But in this case, it also did not work (in fact this time resolution was far worse). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue? Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="6192" LastActivityDate="2016-09-11T09:37:23.103" Title="GuestAdditions on Loki" Tags="|release-loki|settings|" AnswerCount="0" CommentCount="1" ClosedDate="2019-02-20T01:38:31.067" ContentLicense="CC BY-SA 3.0" />
  <row Id="7618" PostTypeId="2" ParentId="7555" CreationDate="2016-09-11T09:42:41.740" Score="5" Body="&lt;p&gt;I recommend this script &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;. Works like a charm.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastEditorUserId="26" LastEditDate="2016-09-11T11:49:56.910" LastActivityDate="2016-09-11T11:49:56.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7619" PostTypeId="2" ParentId="7516" CreationDate="2016-09-11T09:45:30.780" Score="-1" Body="&lt;p&gt;I created the USB with rufus and works well. Even with 3rd-party-drivers checked&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2016-09-11T09:45:30.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7621" PostTypeId="2" ParentId="7561" CreationDate="2016-09-11T10:53:38.400" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;Create Loki Live-USB&lt;/li&gt;&#xA;&lt;li&gt;Boot Elementary from that USB.&lt;/li&gt;&#xA;&lt;li&gt;Open &quot;Application&quot; and run Gparted (There you can change your partitions)&lt;/li&gt;&#xA;&lt;li&gt;Then click &quot;Install Elementary&quot;&lt;/li&gt;&#xA;&lt;li&gt;Click on &quot;Something Else&quot; and click &quot;Next&quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The next screen may look rather intimidating but it is just showing your current disk layout.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Hw9pL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Hw9pL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look at the image above. You will see all partitions on your disk (you can change disks in &quot;Device for boot loader...&quot;&#xA; Choose free disk space there you want to install OS.&#xA;You need two partitions.&#xA;When you have found the partition with free space, click on it and press the plus symbol (+) under the disk layout. If you want to delete partition, click minus symbol.&#xA;First, swap partition. Choose disk space you want to use and create logical partition:&lt;a href=&quot;https://i.stack.imgur.com/Mjr6k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mjr6k.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's recommended to create swap around 1GB or the size of your RAM in case you want to be able to hibernate your system (not possible on some machines).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then create / partition. Choose your free space, set size you want, when create primary partition with mount point &quot;/&quot; (it's means root) as Ext4 file system.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4CF1I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4CF1I.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press &quot;OK&quot; and then &quot;Install now&quot; to continue.&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2016-09-11T10:53:38.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7622" PostTypeId="2" ParentId="7547" CreationDate="2016-09-11T11:18:24.027" Score="5" Body="&lt;p&gt;Install tweaker for Loki:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then Appearance - Windows Controls - Layout (Windows, OS X, etc)&lt;/p&gt;&#xA;&lt;p&gt;For the latest version of elementary-tweaks look at the github repo &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6194" LastEditorUserId="19702" LastEditDate="2022-03-20T21:48:16.207" LastActivityDate="2022-03-20T21:48:16.207" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="7623" PostTypeId="1" CreationDate="2016-09-11T11:30:55.827" Score="1" ViewCount="208" Body="&lt;p&gt;I live in India and I have only net banking facility from a local bank. How do I pay for the download? I do not have a credit card or any other method of paying.&lt;/p&gt;&#xA;" OwnerUserId="6195" LastActivityDate="2016-09-11T11:42:33.883" Title="How do I pay for the download?" Tags="|download|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7624" PostTypeId="2" ParentId="7623" CreationDate="2016-09-11T11:42:33.883" Score="1" Body="&lt;p&gt;You can enter a zero to bypass the Stripe download if you cannot pay via credit/debit/bitcoin/alipay.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-11T11:42:33.883" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7625" PostTypeId="2" ParentId="7472" CreationDate="2016-09-11T11:46:34.233" Score="-2" Body="&lt;p&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install nvidia-XXX nvidia-settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Important!!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to nvidia.com and looking for the right driver. For GeForce GT 740M it is 367.44 today. So:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install nvidia-367 nvidia-settings&lt;/p&gt;&#xA;" OwnerUserId="6194" LastActivityDate="2016-09-11T11:46:34.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7626" PostTypeId="2" ParentId="6685" CreationDate="2016-09-11T12:57:45.843" Score="0" Body="&lt;p&gt;On my Freya setup, I had a problem where the external monitor was somehow getting recognized as the primary. This meant, of course, that the login prompt or the dock were showing up on the external monitor rather than my laptop screen. System Settings was still showing my built-in display as the primary. A quick way to fix this, without removing the hidden &quot;monitors.xml&quot; file was to first set the external as the primary and save it. Then switch it back to the built-in display via settings and reverse it. It seems to have worked for me after I opted to &quot;Keep the configuration&quot;. &lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2016-09-11T12:57:45.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7628" PostTypeId="1" AcceptedAnswerId="8229" CreationDate="2016-09-11T13:30:19.450" Score="14" ViewCount="6264" Body="&lt;p&gt;As per the recent Reddit post, some of the Hotkeys cannot be assigned as shortcuts and the Screenshot shortcuts do not work at all no matter which shortcut combo is selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Xiaomi Mibook has media hotkeys for media (volume uo/volume down/mute) and dedicated key for screenshot. All of this cannot be assigned directly. When I try to assing media key for mute for example, it disables the key. I can however assign the mute key in combination with some other key (e.g WindowsKey+MuteKey) and it works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The kernel has the correct keys assigned however.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xdev for the mute key gives the following debug info: KeyPress event, serial 37, synthetic NO, window 0x3400001, root 0xb5, subw 0x0, time 4059162, (10,-14), root:(751,360), state 0x0, keycode 121 (keysym 0x1008ff12, XF86AudioMute), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xmodmap -pke confirms that they key number observed in xdev is indeed assigned the mute function: keycode 121 = XF86AudioMute NoSymbol XF86AudioMute&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dconf-editor, also confirms that the correct audio functions are assigned&lt;/p&gt;&#xA;" OwnerUserId="6200" LastActivityDate="2018-10-08T14:56:20.647" Title="Loki - Media Keys, Shortcuts, Volume Keys broken" Tags="|keyboard|screenshot|keyboard-shortcuts|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7629" PostTypeId="1" CreationDate="2016-09-11T13:56:13.377" Score="0" ViewCount="1256" Body="&lt;p&gt;I don't know where to ask this, so I'm asking it here.&#xA;&lt;br/&gt;Situation: dynamic IPv6 addresses from ISP, wired modem, home computer. &lt;br/&gt;Symptoms: many web pages don't load; no software is shown in AppCenter except what is installed; &lt;code&gt;sudo apt-get update&lt;/code&gt; works extremely slow (it doesn't finish updating after 1 and a half hours). Behaviour is similar in Ubuntu 16.04 and Linux Mint 18 KDE. &lt;br/&gt;In Freya ipv6 is ignored by default and I don't have any connection problems. In Loki I'm connecting with ipv6 by default and I'm having the problems described above. &lt;br/&gt;Changing Network &gt; Advance Settings &gt; IPv6 Settings &gt; Method: Ignore, leaving IPv4 Settings &gt; Method: Automatic (PPPoE) has no effect. I've tried disabling ipv6 by editing /etc/sysctl.conf; /etc/default/grub; /etc/gai.conf; or blacklisting ipv6 in /etc/modprobe.d/blacklist.conf. It didn't work. I've also tried &lt;code&gt;sudo apt-get -o Acquire::ForceIPv4=true update&lt;/code&gt; without success.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2016-09-11T14:08:56.260" LastActivityDate="2016-09-14T14:03:33.947" Title="How to properly set up a DSL(PPPOE) connection with ipv6 in Loki?" Tags="|release-loki|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7631" PostTypeId="1" AcceptedAnswerId="7659" CreationDate="2016-09-11T14:37:47.360" Score="2" ViewCount="9049" Body="&lt;p&gt;I noticed that the update manager is missing in loki and learned that updates are now handled by AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7510/loki-where-is-the-update-manager&quot;&gt;Loki - Where is the update manager?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to know the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;how do I know which sources/repositories are activated and how can I change this if necessary?&lt;/li&gt;&#xA;&lt;li&gt;what about choosing a mirror server? so far I've had considerably better download speeds when I selected a mirror close to me than with the standard download servers&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-15T21:15:14.407" Title="package sources and mirror servers in loki" Tags="|release-loki|updates|software-sources|sources|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7632" PostTypeId="1" CreationDate="2016-09-11T15:07:32.353" Score="0" ViewCount="80" Body="&lt;p&gt;When I try to save/download a file and choose a save location that is different from the default one, I cannot finish the operation because the window lacks an OK or even Cancel button. See here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/plh42.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/plh42.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug (which I think it is) or is there any good reason behind it?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-11T17:54:38.240" Title="window problem when choosing save location" Tags="|release-loki|window-management|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-11T18:27:56.883" ContentLicense="CC BY-SA 3.0" />
  <row Id="7633" PostTypeId="1" CreationDate="2016-09-11T15:17:23.797" Score="0" ViewCount="1278" Body="&lt;p&gt;In freya I used to modify wingpanel a little (e.g. having seconds show in the clock etc.) using dconf-editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not seem to work anymore in loki. I can modify the respective settings in dconf-editor, but it doesn't have any effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug or a design choice?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-12T09:03:17.710" Title="Loki - dconf-editor not working?" Tags="|settings|release-loki|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7634" PostTypeId="2" ParentId="7632" CreationDate="2016-09-11T16:33:28.243" Score="0" Body="&lt;p&gt;Not really helping ... but I am on the same boat, here !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I did not notice that I have this problem, on an old profile which has been used with many distro (&lt;em&gt;Freya&lt;/em&gt;, &lt;em&gt;Gnome&lt;/em&gt; etc). With a brand new &lt;em&gt;Loki&lt;/em&gt; user profile, I have no problem and I can see the footer of the dialog windows with the &lt;em&gt;OK&lt;/em&gt; and &lt;em&gt;Cancel&lt;/em&gt; buttons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If some would know, how to reset this configuration for that user I would be grateful. I already tried the &lt;em&gt;restore default parameters&lt;/em&gt; button from the &lt;em&gt;Parameters =&gt; About&lt;/em&gt; Window.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2016-09-11T16:33:28.243" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7635" PostTypeId="1" CreationDate="2016-09-11T16:52:15.193" Score="0" ViewCount="26" Body="&lt;p&gt;I Installed Loki 0.4 on my Samsung Netbook N210, all went well only when I tap the touchpad to ENTER, nothing hapens.&#xA;This was already so during installation. The Keys UNDER the touchpad do work.&#xA;(The left key can be used to ENTER)&#xA;Also vertical scrolling on the righthand side is not working.&#xA;Moving the cursor from the touchpad does work.&#xA;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="6204" LastActivityDate="2016-09-11T16:57:23.407" Title="Touchpad on Samsung N210 no ENTER on tap" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7636" PostTypeId="2" ParentId="7635" CreationDate="2016-09-11T16:57:23.407" Score="1" Body="&lt;p&gt;Ok. Stupid newbee I am.&#xA;I went to SETTINGS, touchpad and set it to my needs. All fine.&#xA;Againg sorry to bother you!&#xA;Jan.&lt;/p&gt;&#xA;" OwnerUserId="6204" LastActivityDate="2016-09-11T16:57:23.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7638" PostTypeId="1" AcceptedAnswerId="8466" CreationDate="2016-09-11T17:37:31.083" Score="2" ViewCount="241" Body="&lt;p&gt;I'm importing my library to noise (there are about 12000 songs in my library, and it's been going 3 hours so far. It's about half way through, so likely to be totalling in the region of 6 hours. Is there anything I can do to speed up the process short of submitting a pull request to thread the library import?&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2016-10-03T05:21:50.337" Title="Noise very slow to import" Tags="|music|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7640" PostTypeId="2" ParentId="1638" CreationDate="2016-09-11T18:08:22.363" Score="1" Body="&lt;p&gt;I think I know how my gsettings got borked. I use IMEs for Japanese and Chinese, and I've had to cycle through fcitx/ibus a few times. The override for input module had been put in place of the override for dialog headers (probably a copy-pasta mistake).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make sure you won't lose any overrides you might need, check that key before setting it:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gsettings get org.gnome.settings-daemon.plugins.xsettings overrides&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In my case:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;{'Gtk/DialogsUseHeader': &amp;lt;0&gt;, 'Gtk/IMModule': &amp;lt;'fcitx'&gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&gt;, 'Gtk/DecorationLayout': &amp;lt;'close, :menu,maximize'&gt;}&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2016-09-11T18:08:22.363" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7641" PostTypeId="2" ParentId="7419" CreationDate="2016-09-11T18:23:28.850" Score="2" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;What would it take to create an unofficial 32-bit version of Loki?&lt;/p&gt;&#xA;&lt;p&gt;What would be the steps required to build it from the source?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;elementary OS has substantial information on getting started on their official website. Try working around with the information given at &lt;a href=&quot;https://elementary.io/get-involved#desktop-development&quot; rel=&quot;nofollow noreferrer&quot;&gt;Desktop Development&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;What would be missing or non-functional?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;If you are talking about the difference in 32-bit and 64-bit, then (apart from the obvious one's) that's for you, the developer, to decide!&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;If someone provided an ISO, would it be made available on the website?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The guys at elementary are in a better position to answer! Get in touch with them via Twitter, etc. If having a 32-bit version does fall into their plan (and they aren't working on it).&lt;/p&gt;&#xA;" OwnerUserId="6208" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-11T18:30:56.767" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7642" PostTypeId="1" CreationDate="2016-09-11T18:28:08.243" Score="3" ViewCount="2579" Body="&lt;p&gt;In my freya setup, I had 2 planks, one for each of my monitors. I accomplished this by using the settings file in ~/.config/plank/dock[n]. This file is now missing. Is there any way to create another instance of plank and move it to my second monitor?&lt;/p&gt;&#xA;" OwnerUserId="6209" LastActivityDate="2017-01-03T09:57:39.990" Title="How can I have one plank on each of my monitors" Tags="|release-loki|plank|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7643" PostTypeId="2" ParentId="7419" CreationDate="2016-09-11T18:33:54.340" Score="9" Body="&lt;h1&gt;What would it take to create an unofficial 32-bit version of Loki?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;A lot of work without using our existing build infrastructure.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;What would be the steps required to build it from the source?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Again, a lot of work and fiddling. I don't believe there are succinct instructions anywhere.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;What would be missing or non-functional?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Nothing, so long as everything is built correctly, all 64-bit things should be portable to 32-bit.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;If someone provided an ISO, would it be made available on the website?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;No. elementary are perfectly capable of making a 32-bit build, but any 32-bit only computer is not going to run the system very well. This is a council decision and will not sway because a community member has built one. It would remain an unofficial build, and directly calling it elementary OS would likely infringe on trademarks.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-11T18:33:54.340" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7645" PostTypeId="1" CreationDate="2016-09-11T18:42:28.597" Score="2" ViewCount="2489" Body="&lt;p&gt;I'm fairly new to elementary OS and Linux in general - love it so far. I just installed Loki and I am reinstalling the apps I had on Freya. What's the proper way to install KeePass. I had it installed in Freya and frankly I don't remember how I did it! I think it was through the Freya app center. I don't see it in the Loki app center and my Google searches do not offer a definitive answer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6210" LastActivityDate="2016-09-11T18:53:59.863" Title="KeePass Installation" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7646" PostTypeId="1" CreationDate="2016-09-11T18:44:57.073" Score="0" ViewCount="354" Body="&lt;p&gt;I've tried adding resolutions via xrandr (VGA1 is apparently not a thing) as well as installing NVIDIA's proprietary drivers (the NVIDIA install fails after a &quot;something something drm service error&quot;). My monitor is 4k and I'm stuck at 1024x768.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How can I add my monitor's native resolution to the display menu in system settings?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;RANT: Just as a side note to the project contributors (if they're looking at this), I really want to love this OS but I'm impressed with the fact that Linux has not &quot;handled&quot; the display driver issue and fragility of display control over the past decade since I was last a user. This is pretty bad (yes, there are many hardware vendors and new versions of hardware but there must be a way for the Linux community to get it together on this one).&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="6211" LastEditorUserId="6211" LastEditDate="2016-09-11T18:52:02.123" LastActivityDate="2016-09-12T15:59:47.880" Title="Loki and GTX 1070: Can't choose anything but 1024x768" Tags="|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7647" PostTypeId="2" ParentId="7645" CreationDate="2016-09-11T18:53:59.863" Score="5" Body="&lt;p&gt;You can install it  from terminal &lt;code&gt;sudo apt install keepassx&lt;/code&gt;. I did it that way as I was unable to find it in App Center.&lt;/p&gt;&#xA;" OwnerUserId="6213" LastActivityDate="2016-09-11T18:53:59.863" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7648" PostTypeId="2" ParentId="1940" CreationDate="2016-09-11T19:06:20.603" Score="1" Body="&lt;p&gt;Almost a year later, I can answer no, these are total downloads for all tracked versions, not just that point release.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-11T19:06:20.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7650" PostTypeId="2" ParentId="7587" CreationDate="2016-09-11T19:08:22.053" Score="4" Body="&lt;p&gt;In the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after install -&gt; software-properties-gtk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Info retrieved from -&gt; &lt;a href=&quot;https://askubuntu.com/questions/441415/what-has-jockey-been-replaced-with-in-14-04/441416&quot;&gt;https://askubuntu.com/questions/441415/what-has-jockey-been-replaced-with-in-14-04/441416&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested and implemented successful here - sure someone with more Linux experience may have an even better suggestion perhaps? &lt;/p&gt;&#xA;" OwnerUserId="6214" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-15T17:47:21.890" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7651" PostTypeId="2" ParentId="271" CreationDate="2016-09-11T20:10:29.130" Score="0" Body="&lt;p&gt;I can confirm this works with elementary OS 0.4.0 Loki, as of 2016-09-11&lt;/p&gt;&#xA;" OwnerUserId="4664" LastActivityDate="2016-09-11T20:10:29.130" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7652" PostTypeId="1" CreationDate="2016-09-11T20:23:44.573" Score="1" ViewCount="608" Body="&lt;p&gt;I am trying to dual-boot os x 1.11 ('el capitan') and elementary 0.4 (loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hit option to get to the boot menu and get the disk select screen, but when I get into GRUB and select 'try elementary os without installing', I am getting a quick of flash of 'Can not find /boot' and then a black screen forever. This is on a late 2011 macbook pro. Any advices?&lt;/p&gt;&#xA;" OwnerUserId="6218" LastActivityDate="2017-07-08T18:30:58.883" Title="Black screen on 'try elementary os' macbook pro late 2011" Tags="|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7654" PostTypeId="2" ParentId="7565" CreationDate="2016-09-11T21:37:13.323" Score="0" Body="&lt;p&gt;I am going to assume that you are referring to the fact that there is no .deb GUI application to handle installs and therefore you cannot just click the .deb file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to install Trillian without issues by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Downloading the .deb file from their website:&#xA;&lt;a href=&quot;https://www.trillian.im/get/linux/2.0/linux.html&quot; rel=&quot;nofollow&quot;&gt;https://www.trillian.im/get/linux/2.0/linux.html&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Using Terminal: &lt;code&gt;sudo apt install /path/to/file.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5202" LastActivityDate="2016-09-11T21:37:13.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7655" PostTypeId="1" CreationDate="2016-09-11T21:52:25.947" Score="5" ViewCount="1100" Body="&lt;p&gt;Some windows are not displaying context menu when right clicked on theirs title bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm talking about this menu:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/L8Shw.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L8Shw.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Such applications are: Libre Office, Firefox, Chromium (using system titlebar and border), QT Creator etc...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not happening on gnome apps like Nautilus or Gnome-Terminal... so this might be issue only with non-gnome applications only but I can't say for sure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This behavior is known to me since Elementary OS Luna but it is still present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;This is not problem caused by VirtualBox, it is present on real machine too.&lt;/p&gt;&#xA;" OwnerUserId="6222" LastEditorUserId="6222" LastEditDate="2016-09-11T21:58:53.060" LastActivityDate="2019-04-12T02:10:08.453" Title="no context menu when right clicked application's title bar" Tags="|release-loki|" AnswerCount="2" CommentCount="5" ClosedDate="2019-04-18T00:16:19.703" ContentLicense="CC BY-SA 3.0" />
  <row Id="7656" PostTypeId="2" ParentId="7389" CreationDate="2016-09-11T21:59:00.210" Score="-2" Body="&lt;p&gt;I was able to get it using &quot;apt-get build-dep + &quot;..&lt;/p&gt;&#xA;" OwnerUserId="6011" LastActivityDate="2016-09-11T21:59:00.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7658" PostTypeId="1" CreationDate="2016-09-11T22:17:19.047" Score="1" ViewCount="194" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nOb1R.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nOb1R.png&quot; alt=&quot;See that blank notification and missing menu?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this is from a recent install of DesktopNova (from App Center), which I have since deleted, but that notification is still there, even after restart. I checked the startup applications, but couldn't see anything out of the ordinary.&#xA;How can I find out what application is putting that blank tray icon up there and/or how do i get rid of it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THANKS!!!&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-09-11T22:17:19.047" Title="blank notification appeared in top bar. How can I delete?" Tags="|release-loki|notifications|wingpanel|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7659" PostTypeId="2" ParentId="7631" CreationDate="2016-09-11T22:58:44.417" Score="4" Body="&lt;p&gt;I found out that you can get back the update manager by installing software properties:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will allow you to choose the sources and servers, just like in freya and Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I wasn't precise since the update manager is another application - known from freya and taking care of system and application updates. you can install that one too:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install update-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, sources and servers are managed with software-properties-gtk&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="26" LastEditDate="2016-09-15T21:15:14.407" LastActivityDate="2016-09-15T21:15:14.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7660" PostTypeId="1" CreationDate="2016-09-11T23:04:32.420" Score="1" ViewCount="317" Body="&lt;p&gt;I edited the Applications Menu with Alacarte (Main Menu), Now when I search for any app from slingshot, Wingpanel Crashes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;here are the debug info:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;skb50bd@ROG:~$ killall wingpanel&#xA;skb50bd@ROG:~$ wingpanel&#xA;[INFO 04:36:45.071750] Application.vala:155: System Panel version: 2.0.1&#xA;[INFO 04:36:45.071777] Application.vala:157: Kernel version: 4.4.0-36-generic&#xA;[FATAL 04:36:45.170516] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 04:36:45.170800] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[22:36:45.246899 GLib-GIO-Critical] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[22:36:45.246917 GLib-GIO-Critical] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[22:36:45.246922 GLib-GIO-Critical] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[22:36:45.246926 GLib-GIO-Critical] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[22:36:45.246932 Critical] gee_abstract_collection_get_size: assertion 'self != NULL' failed&#xA;[22:36:45.246937 Warning] Theme.vala:508: Currently selected gtk+ theme 'elementary' does not provide a dock theme, fallback to the built-in defaults!&#xA;[22:36:45.301845 Gtk-Warning] Attempting to add a widget with type AyatanaCompatibilityIndicatorButton to a container of type GtkRevealer, but the widget is already inside a container of type GtkRevealer, please remove the widget from its existing container first.&#xA;[22:36:45.301870 Gtk-Warning] Attempting to add a widget with type GtkStack to a container of type WingpanelWidgetsIndicatorPopover, but the widget is already inside a container of type WingpanelWidgetsIndicatorPopover, please remove the widget from its existing container first.&#xA;[22:36:45.303046 GLib-Critical] g_hash_table_get_keys: assertion 'hash_table != NULL' failed&#xA;[22:36:45.484345 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[22:36:45.487711 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[22:36:45.490333 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[22:36:45.509954 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[22:36:45.514932 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[22:36:45.525217 Warning] [DesktopFileInfo] Key file does not have key 'Type' in group 'Desktop Entry'&#xA;[22:36:45.533813 Warning] [DesktopFileInfo] Unable to get exec for Other&#xA;[22:36:45.636385 Info] Tweaks.vala:68: Activating tweaks plug&#xA;[22:36:53.020589 GLib-GIO-Critical] g_desktop_app_info_list_actions: assertion 'G_IS_DESKTOP_APP_INFO (info)' failed&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please help me out here. &#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6199" LastActivityDate="2016-09-11T23:04:32.420" Title="Application Menu Crash when Searching App" Tags="|slingshot|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-05T19:26:14.107" ContentLicense="CC BY-SA 3.0" />
  <row Id="7661" PostTypeId="2" ParentId="7655" CreationDate="2016-09-11T23:18:02.710" Score="-2" Body="&lt;p&gt;Try &lt;strong&gt;Elementary Tweaks&lt;/strong&gt;. Might help.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks -y &amp;amp;&amp;amp; sudo apt update &amp;amp;&amp;amp; sudo apt install elementary-tweaks -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VzUAD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VzUAD.png&quot; alt=&quot;Elementary Tweaks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6199" LastActivityDate="2016-09-11T23:18:02.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7662" PostTypeId="2" ParentId="2706" CreationDate="2016-09-11T23:37:32.977" Score="0" Body="&lt;p&gt;I faced the same problem with my ASUS GL552VW. Fixed with a simple kernel parameter change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Install &lt;strong&gt;Grub Customizer&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer -y&#xA;sudo apt update&#xA;sudo apt install grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2) Open Grub Customizer and Edit the grub entry (with the Pencil Icon) &#xA;&lt;a href=&quot;https://i.stack.imgur.com/1JArU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1JArU.png&quot; alt=&quot;Grub Customizer&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Now make the desired changes. In this case,&lt;a href=&quot;https://i.stack.imgur.com/0IDuM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0IDuM.png&quot; alt=&quot;Edit Menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you need to add a parameter on the second last line that starts with &lt;code&gt;linux /boot/vmlinuz-xxx....&lt;/code&gt; add &lt;code&gt;acpi=force&lt;/code&gt; before &lt;code&gt;ro  quiet splash $vt_handoff&lt;/code&gt;&#xA;Click OK and Save. Now hard reset your laptop. It should be fixed from the next boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using these parameters to boot and this fixes all the function keys operations, keyboard backlight, graphics and the shutdown problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;linux  /boot/vmlinuz-4.4.0-36-generic.efi.signed root=UUID=7e43add9-fbc2-4946-a640-0b269d17c117 i915.modeset=0 nouveau.modeset=1 nvidia.modeset=1 idle=nomwait acpi=force acpi_osi=! acpi_backlight=native ro  quiet splash $vt_handoff&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6199" LastEditorUserId="6199" LastEditDate="2016-09-11T23:44:49.800" LastActivityDate="2016-09-11T23:44:49.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7663" PostTypeId="2" ParentId="7446" CreationDate="2016-09-11T23:51:50.213" Score="1" Body="&lt;p&gt;Try with this command just change the things you need to, like the Nexus device to the one you are using.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LD_PRELOAD='/usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.21' ~/Android/Sdk/tools/emulator -netdelay none -netspeed full -avd Nexus_4_API_23&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This helped me, hope it helps you too&lt;/p&gt;&#xA;" OwnerUserId="6224" LastEditorUserId="26" LastEditDate="2016-09-25T16:29:41.327" LastActivityDate="2016-09-25T16:29:41.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7664" PostTypeId="2" ParentId="7542" CreationDate="2016-09-12T00:07:24.843" Score="7" Body="&lt;p&gt;You can use the options already provided. Or you can install Gnome Software.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-software&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Gnome Software is the new shop for &lt;code&gt;Ubuntu 16.04&lt;/code&gt;. With it you can install the &lt;code&gt;.deb&lt;/code&gt; package, and the same list these softwares installed, options that the AppCenter doesn't have.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Gnome Software does not disable AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5V5ws.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5V5ws.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6175" LastEditorUserId="26" LastEditDate="2016-09-15T15:56:15.830" LastActivityDate="2016-09-15T15:56:15.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7666" PostTypeId="1" AcceptedAnswerId="7669" CreationDate="2016-09-12T02:56:40.167" Score="1" ViewCount="902" Body="&lt;p&gt;I've been trying to log in the Mail app with my Gmail account, however I always get a &quot;wrong email or password&quot; message, even though I was sure I had it correct all of the times. I received an email from Google some minutes ago saying that someone tried to log in using an app that has known security problems or is out of date. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just made a fresh install of Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I deal with this situation? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A screenshot of the email:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Q0em9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q0em9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6207" LastEditorUserId="6207" LastEditDate="2016-09-12T03:01:51.283" LastActivityDate="2017-06-20T15:40:00.073" Title="Google says Mail app is insecure" Tags="|applications|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7667" PostTypeId="1" CreationDate="2016-09-12T03:17:11.110" Score="0" ViewCount="1299" Body="&lt;p&gt;After installing Loki and downloading the latest version of Chrome, I haven't been able to install it. I've tried both GDebi and the terminal as well as several different downloads, but both tell me the package is nonexistent. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The exact text in GDebi is:&#xA;      A nonexistent package has been selected for installation. Please select an existing .deb package file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal:&#xA;        error processing archive google-chrome-stable_current_amd64.deb (--install):&#xA; cannot access archive: No such file or directory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="6227" LastActivityDate="2016-09-12T13:44:46.977" Title="Chrome install issues in Loki" Tags="|google-chrome|" AnswerCount="2" CommentCount="1" ClosedDate="2016-09-12T15:42:25.870" ContentLicense="CC BY-SA 3.0" />
  <row Id="7668" PostTypeId="2" ParentId="7667" CreationDate="2016-09-12T04:30:25.240" Score="0" Body="&lt;p&gt;&lt;em&gt;Note - This is not a solution to your problem, rather a way to get Chrome working.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I faced similar issue and just to save some time and effort, looked for Chromium in the new app store. Turns out you have one! The chromium in the new app store is at version 52 and works perfectly fine, without the need to use gdebi, apt-get install, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you aren't hell bent on installing Google Chrome (the .deb from their webpage) then Chromium (open source) works just fine! I have been using it since installing Loki and no problem whatsoever :)&lt;/p&gt;&#xA;" OwnerUserId="6208" LastActivityDate="2016-09-12T04:30:25.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7669" PostTypeId="2" ParentId="7666" CreationDate="2016-09-12T04:36:46.117" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I always get a &quot;wrong email or password&quot; message&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you are using 2-Step verification then you need to create a password specifically for Mail app. It will work fine. Additionally, if you are using Google App (for business, etc. and not the @gmail account) then again you need to follow specific setup instruction.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been using both the gmail (and google business) account without encountering the email you have mentioned. I suspect this might have to do multiple login failures. But that's just a rough guess.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyhow, there's a workaround to get the less secure app working. Follow &lt;a href=&quot;https://support.google.com/accounts/answer/6010255?hl=en&quot; rel=&quot;nofollow&quot;&gt;this link (Google Support)&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="6208" LastActivityDate="2016-09-12T04:36:46.117" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7670" PostTypeId="1" CreationDate="2016-09-12T04:59:27.893" Score="1" ViewCount="1367" Body="&lt;p&gt;I'm unable to take screenshots using the print screen button , and when i tried changing the settings also noticed you can't assign single key for the same , this used to work perfectly in freya .&#xA;p.s i had to take the picture from a external device  &lt;a href=&quot;https://i.stack.imgur.com/b1mp7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b1mp7.jpg&quot; alt=&quot;as soon as i try to assign a key to take the screen shot the got disabled&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="478" LastActivityDate="2016-09-12T08:41:19.187" Title="unable to take screenshot" Tags="|settings|release-loki|elementary-website|screenshot|" AnswerCount="1" CommentCount="2" ClosedDate="2016-09-13T18:14:16.753" ContentLicense="CC BY-SA 3.0" />
  <row Id="7672" PostTypeId="2" ParentId="6715" CreationDate="2016-09-12T05:14:50.790" Score="0" Body="&lt;p&gt;i have more than couple of install this works for me almost every time .&#xA;-format the usb to fat32 .&#xA;-you can use the dd command the if you are using already using a nix system already &#xA;eg of dd command : sudo dd if=/path/to/.iso of=/dev/sdb bs=1M&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try booting .&#xA;if this doesn't work try unetbootin, or startup disk creator ,&#xA;this might help you &lt;a href=&quot;https://elementary.io/es/docs/installation#verify-your-download&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/es/docs/installation#verify-your-download&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or try with a different memory stick &lt;/p&gt;&#xA;" OwnerUserId="478" LastEditorUserId="478" LastEditDate="2016-09-13T14:50:58.887" LastActivityDate="2016-09-13T14:50:58.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7673" PostTypeId="1" AcceptedAnswerId="7677" CreationDate="2016-09-12T06:36:04.000" Score="0" ViewCount="1021" Body="&lt;p&gt;In Freya System Settings under Keyboard there used to be the Options tab with lots of options for configuring 3rd level key, ctrl key position, Alt/Win behavior etc...&#xA;Where can I access these options in Loki?&lt;/p&gt;&#xA;" OwnerUserId="4536" LastActivityDate="2016-09-12T08:43:35.343" Title="Where's Keyboard Options in Loki?" Tags="|release-loki|keyboard|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7674" PostTypeId="1" CreationDate="2016-09-12T06:58:30.823" Score="0" ViewCount="194" Body="&lt;p&gt;I'm getting errors in showing viber icons. Can anyone help me with this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Menu: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7DeS9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/7DeS9.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Panel:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/v1NXq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/v1NXq.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user6233" LastActivityDate="2016-11-07T21:56:13.677" Title="Viber icon broken?" Tags="|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7675" PostTypeId="1" CreationDate="2016-09-12T07:08:16.160" Score="0" ViewCount="101" Body="&lt;p&gt;I tried to restore some files from trash but it just closes and the files aren't restored, they're still in the trash. The empty trash function works, however.&lt;/p&gt;&#xA;" OwnerUserId="5791" LastActivityDate="2016-09-12T19:51:51.660" Title="Restore from trash not working?" Tags="|system|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-25T16:06:57.983" ContentLicense="CC BY-SA 3.0" />
  <row Id="7676" PostTypeId="2" ParentId="7670" CreationDate="2016-09-12T08:41:19.187" Score="0" Body="&lt;p&gt;It doesn't work for me either. I do not know if it is a bug or desired behaviour. Best thing to do would be to open up a bug report. This will bring the issue to elementary OS's team attention.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Meanwhile you can use the internal screenshot app of elementary OS:&#xA;Open the applications menu on the top left side of the screen and type screenshot. You can then choose to make a picture of the whole screen or port of it. &lt;/p&gt;&#xA;" OwnerUserId="6237" LastActivityDate="2016-09-12T08:41:19.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7677" PostTypeId="2" ParentId="7673" CreationDate="2016-09-12T08:43:35.343" Score="1" Body="&lt;p&gt;From the AppCenter install Tweak Tools, open Tweak Tools and select Typing to access all these options.&lt;/p&gt;&#xA;" OwnerUserId="4536" LastActivityDate="2016-09-12T08:43:35.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7678" PostTypeId="2" ParentId="7633" CreationDate="2016-09-12T09:03:17.710" Score="1" Body="&lt;p&gt;dconf-editor is working as it should.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Though it seems it is not posssible to change time format in wingpanel anymore using dconf-editor anymore. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AtvPr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AtvPr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;On my (freshly installed) system there is only an option to show week numbers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also elementary-tweaks does not show an option to change the time format, see &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;.  &lt;/p&gt;&#xA;" OwnerUserId="6237" LastActivityDate="2016-09-12T09:03:17.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7680" PostTypeId="1" CreationDate="2016-09-12T10:08:08.017" Score="11" ViewCount="5447" Body="&lt;p&gt;On a new loki installation I have the problem that the wingpanel stops responding after some time. I can then not open the applications menu, clock or indicators.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a few minutes it sometimes comes back to life and everything works as expceted. Then it suddenly freezes again...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only additional indicators I have installed is Dropbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have an idea on how to debug this problem?&lt;/p&gt;&#xA;" OwnerUserId="6238" LastActivityDate="2017-04-05T06:34:37.170" Title="Wingpanel not responding (Loki)" Tags="|release-loki|wingpanel|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7681" PostTypeId="1" AcceptedAnswerId="7685" CreationDate="2016-09-12T10:26:10.197" Score="10" ViewCount="14424" Body="&lt;p&gt;By default, the dock (plank) sits at the bottom of the screen. I'd like it to be on the right, since my monitor is quite wide, and I want to use as much vertical space as possible for windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In previous versions (Freya), I could use elementary Tweaks, but the settings for the dock are not in it in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a setting I could change if I use dconf Editor?&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2016-09-13T07:43:59.960" Title="How do I move the dock to the right of screen on loki?" Tags="|release-loki|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7682" PostTypeId="2" ParentId="7681" CreationDate="2016-09-12T10:32:00.597" Score="1" Body="&lt;p&gt;I found it. Using dconf, the settings for plank are in:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;net&lt;/code&gt; &gt; &lt;code&gt;launchpad&lt;/code&gt; &gt; &lt;code&gt;plank&lt;/code&gt; &gt; &lt;code&gt;docks&lt;/code&gt; &gt; &lt;code&gt;dock1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend turning on &lt;code&gt;show-dock-item&lt;/code&gt;, which provides a new dock item that opens the dock settings, where you can change the other settings (like the dock position).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;: Using dconf Editor is not recommended, but I'll leave my answer here in case anyone wants to know this method for other reasons.&lt;/p&gt;&#xA;" OwnerUserId="100" LastEditorUserId="100" LastEditDate="2016-09-13T03:45:48.627" LastActivityDate="2016-09-13T03:45:48.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7683" PostTypeId="1" CreationDate="2016-09-12T10:34:43.190" Score="0" ViewCount="785" Body="&lt;p&gt;I'm using Elementary OS 0.4 live on USB stick and don't know if &quot;Formats&quot; in &quot;Language &amp;amp; Region&quot; setting is correct (it's all in Russian).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's English by default, but the &quot;Formats&quot; sections is Russian (also by default). I changed to different language (Vietnamese in my case) and &quot;Formats&quot; drop-down list appeared correctly, but still has big blue check on English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KZori.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KZori.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6239" LastEditorUserId="9" LastEditDate="2016-09-12T17:44:34.337" LastActivityDate="2019-04-19T19:19:30.577" Title="Language &amp; Region Setting doesn't right" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ClosedDate="2019-04-19T19:20:00.623" ContentLicense="CC BY-SA 3.0" />
  <row Id="7684" PostTypeId="2" ParentId="7507" CreationDate="2016-09-12T10:36:05.047" Score="2" Body="&lt;p&gt;You can also just install &quot;Software &amp;amp; Updates&quot; from the app center.&lt;/p&gt;&#xA;" OwnerUserId="86" LastActivityDate="2016-09-12T10:36:05.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7685" PostTypeId="2" ParentId="7681" CreationDate="2016-09-12T10:47:49.377" Score="20" Body="&lt;p&gt;You can get the plank preferences by doing either &lt;kbd&gt;Ctrl&lt;/kbd&gt;+right-click on the plank, or from a command line  &lt;code&gt;plank --preferences&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5862" LastEditorUserId="37" LastEditDate="2016-09-13T07:43:47.547" LastActivityDate="2016-09-13T07:43:47.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7686" PostTypeId="1" AcceptedAnswerId="8092" CreationDate="2016-09-12T11:30:17.937" Score="3" ViewCount="4959" Body="&lt;p&gt;Hi everyone I just installed Loki and I'm having trouble with my touchpad sensibility. It's too high!! I read about changing a property called Synapitics Finger but I couldn't find it !!! Here's the output when I run xinput --watch-props 13 :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;franciscone-Inspiron-5458:~$ xinput --watch-props 13&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Device 'SynPS/2 Synaptics TouchPad':&#xA;    Device Enabled (139):   1&#xA;    Coordinate Transformation Matrix (141): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libinput Tapping Enabled (275): 1&#xA;libinput Tapping Enabled Default (276): 0&#xA;libinput Tapping Drag Enabled (277):    1&#xA;libinput Tapping Drag Enabled Default (278):    1&#xA;libinput Tapping Drag Lock Enabled (279):   0&#xA;libinput Tapping Drag Lock Enabled Default (280):   0&#xA;libinput Accel Speed (281): 0.000000&#xA;libinput Accel Speed Default (282): 0.000000&#xA;libinput Natural Scrolling Enabled (283):   1&#xA;libinput Natural Scrolling Enabled Default (284):   0&#xA;libinput Send Events Modes Available (259): 1, 1&#xA;libinput Send Events Mode Enabled (260):    0, 0&#xA;libinput Send Events Mode Enabled Default (261):    0, 0&#xA;libinput Left Handed Enabled (285): 0&#xA;libinput Left Handed Enabled Default (286): 0&#xA;libinput Scroll Methods Available (287):    1, 1, 0&#xA;libinput Scroll Method Enabled (288):   1, 0, 0&#xA;libinput Scroll Method Enabled Default (289):   1, 0, 0&#xA;libinput Click Methods Available (290): 1, 1&#xA;libinput Click Method Enabled (291):    1, 0&#xA;libinput Click Method Enabled Default (292):    1, 0&#xA;libinput Disable While Typing Enabled (293):    1&#xA;libinput Disable While Typing Enabled Default (294):    1&#xA;Device Node (262):  &quot;/dev/input/event6&quot;&#xA;Device Product ID (263):    2, 7&#xA;libinput Drag Lock Buttons (295):   &amp;lt;no items&amp;gt;&#xA;libinput Horizonal Scroll Enabled (264):    1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6242" LastActivityDate="2019-03-05T13:30:44.423" Title="Touchpad sensibility is too high in Loki?" Tags="|release-loki|touchpad|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7687" PostTypeId="1" CreationDate="2016-09-12T11:31:41.020" Score="11" ViewCount="21674" Body="&lt;p&gt;I have just installed elementary OS Loki and it looks great. I have one problem though. WiFi is not working.&#xA;During installation it worked perfectly and I was able to connect to my home network and check on the boxes for download updates &amp;amp; third party software.&#xA;Now my laptop WiFi button's LED is yellow instead of white and it says WiFi is disabled.&#xA;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="6243" LastEditorUserId="37" LastEditDate="2016-09-14T12:22:01.970" LastActivityDate="2017-05-17T06:45:19.830" Title="WiFi is not working on Loki" Tags="|release-loki|wifi|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="7688" PostTypeId="1" CreationDate="2016-09-12T11:49:23.387" Score="3" ViewCount="1839" Body="&lt;p&gt;I'm using ASUS GL552VW. It has Intel HD Graphics 530, and Nvidia Geforce 960M Graphics Processors. &#xA;As using intel graphics will be a power saving option for me, I was trying to install the Intel Propriety Graphics Driver in it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually, it says &quot;elementary loki&quot; is unsupported. So I edited the &lt;code&gt;/etc/lsb-release&lt;/code&gt; file to emulate &quot;Ubuntu 16.04&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it's stuck here for a long time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pdlr0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pdlr0.png&quot; alt=&quot;Intel Graphics Update Tool&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the debug info: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;skb50bd@ROG:~$ intel-graphics-update-tool&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Checking if Intel graphics card available...&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Retrieving information from 01.org...&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Checking distribution...&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Checking kernel version...&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Checking available repositories...&#xA;src/diagnostics-view.c/new_diagnostic: Adding diagnostic for Checking package manager status...&#xA;No LSB modules are available.&#xA;polkit: Fetching org.01.linuxgraphics.update-tool permissions...&#xA;Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Checking if Intel graphics card available...&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Retrieving information from 01.org...&#xA;{&#xA;  errors: (nil)&#xA;  sources: [https://download.01.org/gfx/ubuntu/16.04/main xenial main]&#xA;  keys: []&#xA;  docs: []&#xA;  INSTALL: []&#xA;  install: [i915-4.6.3-4.4.0-dkms libgles1-mesa libgles2-mesa libosmesa6 libva-drm1 libva-egl1 libva-glx1 libva-tpi1 libva-wayland1 libva-x11-1 vainfo libcairo2]&#xA;  upgrade: [libegl1-mesa libegl1-mesa-drivers libgbm1 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libwayland-egl1-mesa libxatracker2 libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libva1 va-driver-all i965-va-driver intel-gpu-tools]&#xA;  lts: []&#xA;}&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Checking distribution...&#xA; package_manager_is_distro_supported&#xA; Configuration : Loading …  [   0 % ] ⏲&#xA;{&#xA;  errors: (nil)&#xA;  sources: [https://download.01.org/gfx/ubuntu/16.04/main xenial main]&#xA;  keys: []&#xA;  docs: []&#xA;  INSTALL: []&#xA;  install: [i915-4.6.3-4.4.0-dkms libgles1-mesa libgles2-mesa libosmesa6 libva-drm1 libva-egl1 libva-glx1 libva-tpi1 libva-wayland1 libva-x11-1 vainfo libcairo2]&#xA;  upgrade: [libegl1-mesa libegl1-mesa-drivers libgbm1 libgl1-mesa-dri libgl1-mesa-glx libglapi-mesa libwayland-egl1-mesa libxatracker2 libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libva1 va-driver-all i965-va-driver intel-gpu-tools]&#xA;  lts: []&#xA;}&#xA; package_manager_is_distro_supported&#xA; Configuration : Loaded  [  80 % ] ⏲&#xA; package_manager_is_distro_supported&#xA; Configuration : Testing …  [  80 % ] ⏲&#xA;Checking repository sources 3 &amp;gt;= 1&#xA;Checking package list 28 &amp;gt;= 1&#xA; package_manager_is_distro_supported&#xA; Configuration : Complete  [  ] ◦&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Checking kernel version...&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Checking available repositories...&#xA;src/diagnostics-view.c/diagnostics_view_start: Running diagnostic Checking package manager status...&#xA;NOTE: This is only a simulation!&#xA;      apt-get needs root privileges for real execution.&#xA;      Keep also in mind that locking is deactivated,&#xA;      so don't depend on the relevance to the real current situation!&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;src/main-window.c/on_diagnostics_finished: Diagnostics finished successfully&#xA;diagnostics warning flags: 01&#xA; transaction_view_start&#xA; Ensuring consistent system... : …  [   0 % ] ⏲&#xA;src/transaction-view.c/transaction_view_start: Running transaction Ensuring consistent system...&#xA; pre_install_transaction&#xA; Pre-install :   [   0 % ] ◦&#xA; package_manager_pre_install&#xA; Pre-install : Ensuring consistent repositories …  [   0 % ] ⏲&#xA;+ [ -f /etc/apt/sources.list.d/intellinuxgraphics.list ]&#xA;src/transaction-view.c/on_pm_op_finished: Package manager operation finished&#xA; on_pm_op_finished&#xA; Pre-install : Complete  [  ] ◦&#xA; package_manager_pre_install&#xA; Pre-install : Complete  [  ] ◦&#xA; transaction_view_start&#xA; Ensuring consistent system... : Complete  [  ] ◦&#xA; transaction_view_start&#xA; Listing packages... : …  [   0 % ] ⏲&#xA;src/transaction-view.c/transaction_view_start: Running transaction Listing packages...&#xA; list_transaction&#xA; List packages :   [  ] ⏲&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6199" LastActivityDate="2016-10-03T19:41:08.867" Title="Cannot Install Intel Proprietary Graphics Driver" Tags="|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7690" PostTypeId="1" CreationDate="2016-09-12T12:45:24.383" Score="1" ViewCount="49" Body="&lt;p&gt;I still use old fashionable laptop so I really need 32-bit Intel version, the only one download button links downloads &lt;strong&gt;elementaryos-0.4-stable-amd64.20160909.iso&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6245" LastActivityDate="2016-09-12T12:45:24.383" Title="Is there a chance to get x86 version of Loki" Tags="|elementary-website|" AnswerCount="0" CommentCount="0" ClosedDate="2016-09-12T15:55:16.863" ContentLicense="CC BY-SA 3.0" />
  <row Id="7691" PostTypeId="2" ParentId="7686" CreationDate="2016-09-12T12:55:12.083" Score="2" Body="&lt;p&gt;I've had luck by installing dconf-editor with:&#xA; &lt;code&gt;sudo apt-get install dconf-tools&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open dcong-editor and navigate to &lt;strong&gt;org&lt;/strong&gt; &gt; &lt;strong&gt;gnome&lt;/strong&gt; &gt; &lt;strong&gt;desktop&lt;/strong&gt; &gt; &lt;strong&gt;peripherals&lt;/strong&gt; &gt; &lt;strong&gt;touchpad&lt;/strong&gt; to change the speed manually to something negative.&lt;/p&gt;&#xA;" OwnerUserId="6247" LastActivityDate="2016-09-12T12:55:12.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7692" PostTypeId="2" ParentId="6715" CreationDate="2016-09-12T13:02:47.037" Score="1" Body="&lt;p&gt;Try re-downloading the .iso through magnet link (or directly) cross-reference the sha256. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;if everything checks out, format your usb as fat32 with default allocation (or I usually prefer 32kb)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open rufus and select your drive, and iso as normal and make sure to ONLY do those things, don't change any other settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work, redownload rufus as a portable version and use that (to ensure that no settings have been changed).&lt;/p&gt;&#xA;" OwnerUserId="6247" LastEditorUserId="26" LastEditDate="2016-09-12T15:57:35.977" LastActivityDate="2016-09-12T15:57:35.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7693" PostTypeId="2" ParentId="7667" CreationDate="2016-09-12T13:44:46.977" Score="0" Body="&lt;p&gt;i have same problem, you can try this commomon on terminal : &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ sudo apt-get install -f&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;My problem fixed with that...&lt;/p&gt;&#xA;" OwnerUserId="6251" LastActivityDate="2016-09-12T13:44:46.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7694" PostTypeId="2" ParentId="7675" CreationDate="2016-09-12T13:46:25.410" Score="2" Body="&lt;p&gt;It is a bug: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1622053&quot; rel=&quot;nofollow&quot;&gt;restore from trash fails&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Was confirmed and as i see fixed by Jeremy Wootten.&lt;/p&gt;&#xA;" OwnerUserId="6249" LastEditorUserId="9" LastEditDate="2016-09-12T19:51:51.660" LastActivityDate="2016-09-12T19:51:51.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7695" PostTypeId="2" ParentId="7544" CreationDate="2016-09-12T13:55:17.377" Score="2" Body="&lt;p&gt;You can try elementary tweaks for do that, you can install it with this common :&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt install software-properties-common&lt;/p&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install elementary-tweaks&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Elementary Tweaks will show on system settings&lt;/p&gt;&#xA;" OwnerUserId="6251" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-12T13:55:17.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7696" PostTypeId="2" ParentId="7510" CreationDate="2016-09-12T13:59:35.853" Score="9" Body="&lt;p&gt;You can install manually that program with this : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-gtk &#xA;sudo apt-get install update-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6251" LastEditorUserId="26" LastEditDate="2016-09-15T21:15:32.697" LastActivityDate="2016-09-15T21:15:32.697" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7697" PostTypeId="1" AcceptedAnswerId="7738" CreationDate="2016-09-12T14:36:15.070" Score="5" ViewCount="182" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1083/how-can-i-add-multiple-timezones-to-freya&quot;&gt;The solution for freya&lt;/a&gt; no longer works as there is no &lt;code&gt;com.canonical.indicator&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6253" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-13T07:47:28.300" Title="How can I add multiple timezones to loki?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7701" PostTypeId="2" ParentId="7646" CreationDate="2016-09-12T15:59:47.880" Score="1" Body="&lt;p&gt;The proproetary GPU drivers in the base repo Elementary uses (Xenial)  are too old to properly support the 10 series cards,  try adding the graphics drivers ppa and grab nvidia-370 from there. As I recall,  xenial is locked to the 350 branch,  that branch doesn't support the 10 series line of cards,  they hadn't even been announced back then. &lt;/p&gt;&#xA;" OwnerUserId="6257" LastActivityDate="2016-09-12T15:59:47.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7703" PostTypeId="1" CreationDate="2016-09-12T16:05:01.917" Score="18" ViewCount="8957" Body="&lt;p&gt;I recently installed elementary OS 0.4 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The language of my OS is English but I use the Spanish (from Spain) keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been using elementary OS since Luna and this hasn't happened to me before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to take a Screenshot using the usual/standard key on the keyboard, I get nothing. No sound, no screenshot, nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I check the Keyboard Settings and saw this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U9KCS.png&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U9KCS.png&quot; alt=&quot;screenshot of my keyboard settings shortcuts regarding screenshot&quot;&gt;&lt;/a&gt;&#xA;Prior to this I haven't done a single edit to my Keyboard Settings, yet Take a Screenshot appears to be Disabled. If I try to set the Print key nothings happens, it just says disabled and stays that way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to put a random combination (Ctrl+P) but it did nothing, all I hear is a faint sound of warning and it doesn't take the picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app itself does works normally, although I miss the &quot;camera-shutter-sound&quot; it used to make.&lt;/p&gt;&#xA;" OwnerUserId="291" LastActivityDate="2016-09-23T11:59:25.093" Title="Unable to Screenshot using keyboard shortcut on elementary OS 0.4 Loki" Tags="|release-loki|keyboard-shortcuts|screenshot|" AnswerCount="3" CommentCount="0" ClosedDate="2016-09-23T20:25:49.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="7704" PostTypeId="1" CreationDate="2016-09-12T16:36:05.423" Score="1" ViewCount="51" Body="&lt;p&gt;I have a video file that by default uses an audio track which is not in my preferred language. I also have an audio file that is intended to go with the video file, and this audio file &lt;em&gt;is&lt;/em&gt; in my preferred language. I see the gear icon in the bottom right corner, as shown below, but the &quot;Audio&quot; and &quot;Subtitles&quot; options are greyed out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UxRjs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UxRjs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Is there a way to import an external audio file, like how you can import an external subtitle file?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would love to use this default video player because I think it looks better than any of the alternatives I've seen so far, but this is keeping me from being able to.&lt;/p&gt;&#xA;" OwnerUserId="5967" LastActivityDate="2016-09-12T16:36:05.423" Title="Is there a way to import/choose an external audio track to play over a movie in Audience/Videos?" Tags="|release-loki|videos|audience|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7705" PostTypeId="2" ParentId="7703" CreationDate="2016-09-12T16:40:55.900" Score="5" Body="&lt;p&gt;This is a bug, you can check it out here &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1622298&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1622298&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5202" LastActivityDate="2016-09-12T16:40:55.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7706" PostTypeId="2" ParentId="7686" CreationDate="2016-09-12T16:55:54.240" Score="2" Body="&lt;p&gt;You can adjust the speed sensitivity by playing with the numbers for &lt;code&gt;libinput Accel Speed&lt;/code&gt;. It will accept anything from &lt;code&gt;-1&lt;/code&gt; to &lt;code&gt;1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For instance, you can try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xinput --set-prop &quot;SynPS/2 Synaptics TouchPad&quot; &quot;libinput Accel Speed&quot; -0.5&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may need to set this value automatically every time your computer starts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do that, you'll need to save an executable &lt;code&gt;.sh&lt;/code&gt; file in your startup applications which contains something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;# Trackpad Accel Speed was 0. Accepts values between -1 and 1.&#xA;xinput --set-prop &quot;SynPS/2 Synaptics TouchPad&quot; &quot;libinput Accel Speed&quot; -0.5&#xA;&#xA;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2730" LastActivityDate="2016-09-12T16:55:54.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7707" PostTypeId="1" CreationDate="2016-09-12T17:04:14.700" Score="2" ViewCount="568" Body="&lt;p&gt;I've compiled vim from source following &lt;a href=&quot;https://github.com/Valloric/YouCompleteMe/wiki/Building-Vim-from-source&quot; rel=&quot;nofollow&quot;&gt;these instructions&lt;/a&gt; (except I did not specify a prefix to install it to the default location viz. /usr/local) and also ran the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --install /usr/bin/editor editor /usr/local/bin/gvim 1&#xA;sudo update-alternatives --set editor /usr/local/bin/gvim&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then confirmed that it's been set as the default using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --config editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, I still don't get the option to select gvim as a text editor in &lt;code&gt;Settings &amp;gt; Applications &amp;gt; Default&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6253" LastEditorUserId="242" LastEditDate="2016-09-12T19:12:15.357" LastActivityDate="2016-11-02T07:10:51.057" Title="How do I set gvim as the default editor in loki?" Tags="|settings|release-loki|switchboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7708" PostTypeId="2" ParentId="7513" CreationDate="2016-09-12T17:20:46.437" Score="0" Body="&lt;p&gt;No solution, but at least a workaround:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is sufficient to open the network settings and then edit the connection. If you have tried to connect once the wifi network will show up as a recently used network. If you then edit the wifi network, you can enter the password in the &quot;security&quot; tab, and voilà it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it looks like the problem is that the password isn't saved in the settings upon first connection try.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2016-09-12T17:20:46.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7709" PostTypeId="2" ParentId="7703" CreationDate="2016-09-12T17:34:41.953" Score="11" Body="&lt;p&gt;Actually this issue touches two different bugs in Loki:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/screenshot-tool/+bug/1622224&quot;&gt;Printscreen &quot;PrtScn&quot; button doesn't actually take a screenshot&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1622298&quot;&gt;Custom keyboard shortcuts not working, loki fresh install&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-09-12T17:34:41.953" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7710" PostTypeId="2" ParentId="7683" CreationDate="2016-09-12T18:27:02.507" Score="1" Body="&lt;p&gt;That's a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1593339&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;bug&lt;/strong&gt;&lt;/a&gt; i also noticed on liveUSB.&#xA;It's reported and confirmed but not fixed. If this bug affects you so please register on launchpad and go to &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1593339/+affectsmetoo&quot; rel=&quot;nofollow&quot;&gt;this link&lt;/a&gt;. &#xA;By the way, after installation everthing is ok and you can change your language and formats.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2016-09-12T18:27:02.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7711" PostTypeId="2" ParentId="7544" CreationDate="2016-09-12T19:16:34.313" Score="2" Body="&lt;p&gt;You can install the application &lt;em&gt;dconf-editor&lt;/em&gt; with your terminal and&lt;br&gt;&#xA;there you can change these setting.&#xA;Type in your terminal...  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, after installation finished open &lt;em&gt;dconf-editor&lt;/em&gt; and go to  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;org &gt; gnome &gt; desktop &gt; interface&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Now on the right side there is a point called 'font-name' and after that its defined with 'Open Sans 9' by default. This is your default system font.&lt;br&gt;&#xA;Change the number to 10 for example and you see the affect immediately.&lt;br&gt;&#xA;The font for terminal or scratch-text-editor are separately.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For terminal go to...  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;org &gt; pantheon &gt; terminal &gt; settings&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;For scratch-text-editor got to...  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;org &gt; pantheon &gt; scratch &gt; settings&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="6165" LastEditorUserId="6165" LastEditDate="2016-09-12T19:23:59.747" LastActivityDate="2016-09-12T19:23:59.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7712" PostTypeId="2" ParentId="7675" CreationDate="2016-09-12T19:39:01.473" Score="0" Body="&lt;p&gt;I was able to compile Jeremy's branch and this fixes the bug for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please read his comment...  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1622053/comments/10&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1622053/comments/10&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe someone else can test this and give an answer to the &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1622053&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;bug report&lt;/strong&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2016-09-12T19:39:01.473" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7714" PostTypeId="1" AcceptedAnswerId="9362" CreationDate="2016-09-12T20:25:26.557" Score="5" ViewCount="5674" Body="&lt;p&gt;I´ve just installed elementary OS Loki, and downloaded and installed Google Chrome from their website. When I turn off my computer, and restart, Google Chrome don't remember any password, not even the sync one. So I have to manually reenter my account. How I can fix it?&lt;/p&gt;&#xA;" OwnerUserId="6264" LastEditorUserId="5565" LastEditDate="2016-11-21T21:17:18.873" LastActivityDate="2016-11-23T02:58:52.337" Title="Chrome always asking for password in elementary OS Loki" Tags="|google-chrome|keyring|" AnswerCount="4" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7717" PostTypeId="1" CreationDate="2016-09-12T20:47:42.217" Score="2" ViewCount="504" Body="&lt;p&gt;After a fresh install of Loki without making any modifications the wingpanel takes a really long time to load and often stops responding. Sometimes when it doesn't stop responding the OS ceases to respond to mouse clicks. My issues with Loki have caused me to go back to Freya as Loki is currently unusable for me.&lt;/p&gt;&#xA;" OwnerUserId="6263" LastActivityDate="2016-09-29T17:49:23.270" Title="Loki WingPanel Takes a Long Time to Load and Stops Responding" Tags="|release-loki|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-30T18:26:31.350" ContentLicense="CC BY-SA 3.0" />
  <row Id="7720" PostTypeId="2" ParentId="7681" CreationDate="2016-09-12T21:42:55.507" Score="5" Body="&lt;p&gt;Achieve this task by...&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Hold &lt;kbd&gt;Ctrl&lt;/kbd&gt;+right click anywhere on the dock&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select Preferences&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select Position drop down box&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select desired option&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6174" LastEditorUserId="37" LastEditDate="2016-09-13T07:43:59.960" LastActivityDate="2016-09-13T07:43:59.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7723" PostTypeId="1" CreationDate="2016-09-13T01:27:19.620" Score="0" ViewCount="180" Body="&lt;p&gt;I changed the &lt;em&gt;Wireless Network Name&lt;/em&gt; in my router and the channel from 3 to 13. The Wifi works perfectly since I can connect via my cellphone (using the new name)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Loki I can't even see my connection, when I could connect without issues when it had its previous name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see lots of other Wifi signals, just not mine (neither the old nor the new one)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix/debug this?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2016-09-13T02:20:59.523" LastActivityDate="2016-09-13T13:15:32.480" Title="Can't see home Wifi (up and working) after changing wireless network name" Tags="|release-loki|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7724" PostTypeId="1" CreationDate="2016-09-13T01:33:44.057" Score="2" ViewCount="140" Body="&lt;p&gt;I did the encrypted disk option upon setup and have forgotten my passphrase. I wrote down the backup code it gave me, but don't know where to use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how do I turn off this encryption? It's more worry than it's worth.&lt;/p&gt;&#xA;" OwnerUserId="6273" LastEditorUserId="16827" LastEditDate="2019-04-11T06:27:21.247" LastActivityDate="2020-01-06T19:01:35.183" Title="Forgot passphrase of an encrypted disk" Tags="|security|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7726" PostTypeId="1" CreationDate="2016-09-13T02:09:54.670" Score="1" ViewCount="3201" Body="&lt;p&gt;I am trying to enable autologin but when I go to &lt;strong&gt;System Settings&lt;/strong&gt; &gt; &lt;strong&gt;User Accounts&lt;/strong&gt; my account is listed as &lt;strong&gt;(null)&lt;/strong&gt; and autologin cannot be enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GPGWb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GPGWb.png&quot; alt=&quot;(null) user account&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do ?&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2021-02-21T15:22:21.843" Title="How to enable automatic login after installing elementary OS Loki" Tags="|settings|release-loki|greeter|user|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7727" PostTypeId="1" CreationDate="2016-09-13T02:35:11.643" Score="0" ViewCount="267" Body="&lt;p&gt;Some keyboard options not displayed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This options are missing on the keyboard settings of Loki:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Character Maps, Text Entry Settings and Keyboard Layout Chart.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the Freya had these options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The shortcuts that matches the screenshot don't work.&lt;/p&gt;&#xA;" OwnerUserId="6175" LastActivityDate="2017-09-04T03:34:56.643" Title="Problems on the keyboard, some missing options" Tags="|release-loki|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7728" PostTypeId="1" AcceptedAnswerId="7860" CreationDate="2016-09-13T02:37:45.510" Score="1" ViewCount="486" Body="&lt;p&gt;I'm new to eOS. Today I made my fresh install on my computer. I just installed latest release (Loki) and after a installing a few packages it happened this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FoR3o.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FoR3o.jpg&quot; alt=&quot;What?&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, there is a desktop window inside desktop (?). The only issue here is I cant drag icons freely on desktop screen, icons are stuck inside that window. Among few things i did before, I just installed elementary-tweaks and some other programs (I was wondering if it has to do with installing Nemo fileroller. I can interact with this window and it opens directly that file manager when click on a folder). Anyone else with this issue? Any fix or workaround? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="6275" LastEditorUserId="6275" LastEditDate="2016-09-13T03:34:33.773" LastActivityDate="2016-09-15T06:35:47.673" Title="How do I get rid of a &quot;desktop inside of a desktop&quot; bug?" Tags="|release-loki|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7729" PostTypeId="1" CreationDate="2016-09-13T02:55:41.583" Score="1" ViewCount="54" Body="&lt;p&gt;I want to install the latest version of this program. The appstore version is an older version, 1.1. I have tried installing using gdebi but it has the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E: musique: missing-dependency-on-libc needed by usr/local/bin/musique&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing the missing dependency, libtag1c2a, in terminal but it didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else tried to install this?&lt;/p&gt;&#xA;" OwnerUserId="5791" LastActivityDate="2016-09-13T02:55:41.583" Title="Missing dependency for Musique 1.4 (libtag1c2a)" Tags="|software-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7730" PostTypeId="1" CreationDate="2016-09-13T02:56:44.230" Score="4" ViewCount="329" Body="&lt;p&gt;After a fresh install of Loki, I go to point Noise to my existing music folder but I can't select the folder at all. Same with import, selecting a folder (or audio file for that matter) does not seem to work for me.&#xA;I remember in Freya selecting a folder and hitting &quot;enter&quot; or something would immediately begin import.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anything I might be missing?&#xA;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="2667" LastActivityDate="2016-09-21T22:32:58.520" Title="How re-import music in Noise?" Tags="|music|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7731" PostTypeId="2" ParentId="7728" CreationDate="2016-09-13T03:16:27.400" Score="2" Body="&lt;p&gt;This worked with Luna, you can try and see if it still works (taken from &lt;a href=&quot;https://elementaryos.stackexchange.com/a/514/9&quot;&gt;this answer&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you install Nemo you might end up with an &quot;un-closable&quot; window in your desktop that you can't close (see here).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this you need to add --no-desktop to the &lt;code&gt;nemo.desktop&lt;/code&gt; file so it reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=nemo --no-desktop %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-13T03:16:27.400" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7732" PostTypeId="2" ParentId="7726" CreationDate="2016-09-13T03:38:15.820" Score="3" Body="&lt;p&gt;You can try to do so using command line. Here's the &lt;a href=&quot;https://help.ubuntu.com/community/AutoLogin&quot; rel=&quot;nofollow noreferrer&quot;&gt;help page&lt;/a&gt;. In particular you need to use,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/lightdm/lightdm.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and thereafter, add the following lines, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[SeatDefaults]&#xA;autologin-user=&amp;lt;YOUR USERNAME&amp;gt;&#xA;autologin-user-timeout=0&#xA;user-session=ubuntu&#xA;greeter-session=unity-greeter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is slightly different than what's mentioned in help page since that's for older release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit - Here's &lt;a href=&quot;https://askubuntu.com/a/51087&quot;&gt;another answer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6208" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-13T03:38:15.820" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7733" PostTypeId="1" CreationDate="2016-09-13T03:42:26.937" Score="3" ViewCount="2461" Body="&lt;p&gt;I'm trying to get touchegg working in elementary OS Loki but I'm not able to install all the dependencies for touchpad( synaptics ). I'm using Zenbook UX305. Can some please guide me though the necessary steps to install it properly. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="6277" LastEditorUserId="26" LastEditDate="2016-09-25T15:52:40.477" LastActivityDate="2016-11-30T12:57:22.410" Title="How do I install Touchegg in elementary OS?" Tags="|software-installation|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7734" PostTypeId="1" CreationDate="2016-09-13T04:12:34.240" Score="3" ViewCount="10322" Body="&lt;p&gt;I'm not able to adjust the transparency of wingpanel using gsettings/tweaks. Can someone help me out. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="6277" LastActivityDate="2019-07-27T07:14:38.167" Title="How to adjust wingpanel transparency in loki?" Tags="|release-loki|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7735" PostTypeId="1" CreationDate="2016-09-13T04:18:38.880" Score="1" ViewCount="867" Body="&lt;p&gt;I have a collection of 111 music albums (around 7.7GB) on my elementary OS session. I did a clean install of 0.4 Loki, imported my collection to Music and got this as a result:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lCyOd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lCyOd.png&quot; alt=&quot;random organization of music on the Albums view in Music&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;No album covers, is there a workaround for this? &lt;/li&gt;&#xA;&lt;li&gt;Why is my collection not organized alphabetically on the Albums view?&lt;/li&gt;&#xA;&lt;li&gt;Not only that, but every time I close and re-open the Music app, the&#xA;order of the albums on the Albums view changes randomly.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Never had this problem in 0.2 Luna or 0.3 Freya.&lt;/p&gt;&#xA;" OwnerUserId="291" LastEditorUserId="5565" LastEditDate="2016-10-17T15:38:34.317" LastActivityDate="2016-10-17T15:38:34.317" Title="No album art and random order bug in elementary OS 0.4 Loki music app (Noise)" Tags="|release-loki|music|" AnswerCount="0" CommentCount="6" ClosedDate="2016-10-21T20:13:35.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="7736" PostTypeId="1" AcceptedAnswerId="7750" CreationDate="2016-09-13T06:06:15.077" Score="0" ViewCount="1506" Body="&lt;p&gt;&lt;b&gt;I know this question has been asked like a million times, but I am yet to find an answer.&lt;/b&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Windows 7, though my computer itself came with Ubuntu(Dell). I didn't have much experience in it, so I preferred windows 8 and now I'm on windows 7 again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;b&gt;I tried Installing Elementary OS, and it didn't recognize my partitions, instead it took my entire 500GB disk as empty&lt;/b&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenShot &lt;a href=&quot;https://i.stack.imgur.com/OtfXe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OtfXe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And Another&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J0Rw0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J0Rw0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;b&gt;However, the file explorer(Or whatever they call it in Linux), shows My Partitions&lt;/b&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, the other questions had answers as links, If you do that please give me adequate steps, for I have to admit &lt;b&gt;I am a novice in Linux&lt;/b&gt;&lt;/p&gt;&#xA;" OwnerUserId="6281" LastActivityDate="2016-09-13T10:56:30.597" Title="Elementary OS doesn't recognize my partitions" Tags="|dual-boot|grub|elementary-website|microsoft-windows|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7737" PostTypeId="2" ParentId="7734" CreationDate="2016-09-13T07:41:44.797" Score="0" Body="&lt;p&gt;This is set in the gtk theme now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/stylesheet/blob/master/elementary/gtk-3.0/apps.css#L292&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/stylesheet/blob/master/elementary/gtk-3.0/apps.css#L292&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2019-07-27T07:14:38.167" LastActivityDate="2019-07-27T07:14:38.167" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="7738" PostTypeId="2" ParentId="7697" CreationDate="2016-09-13T07:47:28.300" Score="4" Body="&lt;p&gt;The new datetime indicator doesn't have this feature yet.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-09-13T07:47:28.300" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7741" PostTypeId="2" ParentId="7736" CreationDate="2016-09-13T08:07:52.267" Score="0" Body="&lt;p&gt;What are you using for your partitions???   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;NTFS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EXT 2, 3 or 4?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;JFS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;XFS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ReiserFS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, what is your install?   Is it UEFI?    Also, your sentence is confusing as heck.   Are you trying to say:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) my computer came with Ubuntu originally&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) I installed Windows 8.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3)  Didn't like Windows 8, so deleted it and installed Windows 7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;???????????????????????????????&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do this test: grab/download another Linux OS, and see if its installer recognizes your current partitions.  &lt;em&gt;Hint:  download debian live 8.5 or fedora 24/centOS 7, put it on a USB (via dd command), and see if they recognize your partitions as they actually now exist.  Heck, this test may be even better: download and put the latest Gparted Live on a CD (or USB), fire it up, and see if it recognizes the partitions on that hard drive&lt;/em&gt;.   Elementary Loki's installer is the one used by a lot of Linux distros.  If it is not seeing your partitions, I am not optimistic.   And if Gaprted Live cannot see those partitions, well, then, from what I and a few others have seen, your only recourse is going to be dd-ing that whole drive.   Or, you could, like mentioned above, just stick to what's on it right now.  Windows and Ubuntu??...meh, wipe that crapper-stuff off for good and make that HD sing with Loki or Debian or Fedora or....... ;-)&lt;/p&gt;&#xA;" OwnerUserId="5119" LastEditorUserId="5119" LastEditDate="2016-09-13T08:23:31.107" LastActivityDate="2016-09-13T08:23:31.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7742" PostTypeId="1" AcceptedAnswerId="9277" CreationDate="2016-09-13T08:23:22.207" Score="10" ViewCount="1929" Body="&lt;p&gt;When I try to alt-tab backwards (with shift) - elementary switches to the end of stack. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;E.g. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I have opened 5 windows. &lt;/li&gt;&#xA;&lt;li&gt;Switched to the 4th one using alt+tab 3 times. &lt;/li&gt;&#xA;&lt;li&gt;Pressed alt+shift+tab. Now I am on the 5th window and this window is now in the beginning of the stack.  If I try to press alt+shift+tab once again - it start switching windows from the end of the stack.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="1192" LastActivityDate="2018-12-11T11:14:45.300" Title="Switching windows backwards (alt + shift + tab) works in a strange way" Tags="|release-loki|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7743" PostTypeId="1" CreationDate="2016-09-13T08:29:56.957" Score="2" ViewCount="486" Body="&lt;p&gt;Is anyone else using owncloud and having trouble with Loki? I installed the Ubuntu 16.04 version and as soon as I start the application (and syncing is activated), elementary gradually begins to become unresponsive. I suppose it's doing something in the background (even when it's not currently syncing any files, i.e. checking for file changes or something) which can be seen when the mouse cursor and hover active buttons etc. start flickering rapidly at the same time and the CPU usage of wingpanel spikes (I think) and the system does not respond.&#xA;If I close owncloud client, problem is solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be an owncloud bug, but I am asking here because it seems that it doesn't affect Ubuntu 16.04.&lt;/p&gt;&#xA;" OwnerUserId="6285" LastActivityDate="2018-01-30T12:52:11.247" Title="Owncloud client makes Loki unresponsive" Tags="|wingpanel|system|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7745" PostTypeId="2" ParentId="7555" CreationDate="2016-09-13T09:21:30.750" Score="1" Body="&lt;p&gt;From the script &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;, I gathered I just needed to add &lt;code&gt;QT_STYLE_OVERRIDE=''&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so the complete line to add in the autostart applications (Parameters =&gt; Applications =&gt; Startup)  is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And uncheck the &quot;&lt;em&gt;startup at launch&lt;/em&gt;&quot; option, from dropbox application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WATCH OUT&lt;/strong&gt; for the single quote in the command as double quote will generate a silent error (Loki bug).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And dropbox indicator works fine !&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="9" LastEditDate="2017-01-15T03:39:43.337" LastActivityDate="2017-01-15T03:39:43.337" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7748" PostTypeId="1" CreationDate="2016-09-13T10:19:18.580" Score="0" ViewCount="274" Body="&lt;p&gt;I have made a game together with my friends and we thought I'd be great to have it on the elementary app store. How would you go about making that happen? Publish it to the official Ubuntu repositories seems a little bit too complicated and overkill since we only want elementary really. Any ideas? Preferably, we'd not publish it to a PPA and have people install it that way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="6288" LastActivityDate="2016-09-13T15:37:07.080" Title="How to publish on elementary os app center" Tags="|development|appcenter|games|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-13T18:13:28.633" ContentLicense="CC BY-SA 3.0" />
  <row Id="7749" PostTypeId="1" CreationDate="2016-09-13T10:45:15.510" Score="4" ViewCount="777" Body="&lt;p&gt;I am running Loki with 2 monitors. I have workspaces &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2732/workspaces-seem-to-only-apply-to-the-primary-display-is-this-a-feature-or-a-bug/4295#4295&quot;&gt;only on my primary monitor&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also cycling through opened applications with Alt+Tab, I can only cycle through application on that workspace: Is there an option to cycle through all applications, including the ones from other workspaces ?&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="5565" LastEditDate="2016-10-09T00:52:05.760" LastActivityDate="2016-11-08T01:41:10.670" Title="Cycle through all applications, across workspaces" Tags="|release-loki|display|keyboard-shortcuts|workspace|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7750" PostTypeId="2" ParentId="7736" CreationDate="2016-09-13T10:56:30.597" Score="0" Body="&lt;p&gt;I Found the Answer Myself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;b&gt;All I had to do was delete some partition(In windows) and provide the setup some un-allocated space&lt;/b&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After Doing that, the problem was solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks To Everyone, Anyway!&lt;/p&gt;&#xA;" OwnerUserId="6281" LastActivityDate="2016-09-13T10:56:30.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7751" PostTypeId="2" ParentId="4592" CreationDate="2016-09-13T11:53:53.933" Score="1" Body="&lt;p&gt;&lt;a href=&quot;http://blog.elementary.io/post/147637979911/loki-04-stable-release&quot; rel=&quot;nofollow&quot;&gt;Loki &lt;em&gt;was&lt;/em&gt; released the 9 September 2016.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6042" LastActivityDate="2016-09-13T11:53:53.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7752" PostTypeId="1" AcceptedAnswerId="7758" CreationDate="2016-09-13T12:13:36.103" Score="1" ViewCount="809" Body="&lt;p&gt;I downloaded the repo &lt;a href=&quot;https://github.com/daniruiz/Super-Flat-Remix&quot; rel=&quot;nofollow&quot;&gt;Super Flat Remix&lt;/a&gt; and I'd like to take just one aspect of it -- the 'places' subfolder, which changes the folder icons in the files app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do any of you guys know of any way to do that?&lt;/p&gt;&#xA;" OwnerUserId="4961" LastActivityDate="2016-09-13T13:20:13.837" Title="Loki - How do I install just Places folder of Icon Theme?" Tags="|release-loki|themes|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7754" PostTypeId="2" ParentId="2383" CreationDate="2016-09-13T12:43:37.527" Score="1" Body="&lt;p&gt;Can you check if the microphone is enabled by looking at the alsamixer output? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and enter &lt;code&gt;alsamixer&lt;/code&gt; and press enter.&#xA;You may need to select the correct sound chip first, it's probably &quot;HDA &lt;em&gt;something&lt;/em&gt; PCH&quot; or similar.&#xA;If all goes well you should see various bars, it could be that the audio level of the mic is 0 or that it is muted in some other way.&#xA;Things like that don't always show up in the sound settings.&lt;/p&gt;&#xA;" OwnerUserId="248" LastActivityDate="2016-09-13T12:43:37.527" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7755" PostTypeId="2" ParentId="7555" CreationDate="2016-09-13T12:59:20.547" Score="0" Body="&lt;p&gt;I installed Caja Dropbox from the app store and added it to my apps at start up and then switched the slider to on.&lt;/p&gt;&#xA;" OwnerUserId="5824" LastActivityDate="2016-09-13T12:59:20.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7756" PostTypeId="2" ParentId="5331" CreationDate="2016-09-13T13:03:45.917" Score="0" Body="&lt;p&gt;I think the Videos application has a darker color scheme to give it a more cinematic feel when watching movies. A darker color scheme also makes the user interface, in my case at least, less distracting when a movie is playing.&lt;/p&gt;&#xA;" OwnerUserId="5967" LastActivityDate="2016-09-13T13:03:45.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7757" PostTypeId="2" ParentId="7723" CreationDate="2016-09-13T13:15:32.480" Score="1" Body="&lt;p&gt;Solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is an issue with the wireless driver apparently (&lt;a href=&quot;https://askubuntu.com/questions/59310/how-to-use-wi-fi-channels-above-11&quot;&gt;How to use Wi-Fi channels above 11?&lt;/a&gt;) where higher channels (above 7) are not detected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changing the channel to 7 restored the visibility of my router in my laptop.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-09-13T13:15:32.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7758" PostTypeId="2" ParentId="7752" CreationDate="2016-09-13T13:20:13.837" Score="1" Body="&lt;p&gt;The &lt;a href=&quot;https://developer.gnome.org/icon-theme-spec/&quot; rel=&quot;nofollow&quot;&gt;Gnome Icon Theme Specification&lt;/a&gt; lists the option for one icon theme to inherit some properties from another, specifically:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If an icon name is not found in the current theme, it is searched for in the inherited theme (and recursively in all the inherited themes).&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Extract the Super Flat Remix theme to &lt;code&gt;~/.icons&lt;/code&gt; as per the &lt;a href=&quot;https://github.com/daniruiz/Super-Flat-Remix#installation&quot; rel=&quot;nofollow&quot;&gt;instructions&lt;/a&gt;, and then replace the contents of &lt;code&gt;~/.icons/Super Flat Remix/index.theme&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Icon Theme]&#xA;Name=Flat Remix&#xA;Comment=An icon theme for Gnome Shell, the set is inspired by the latest flat design trend.&#xA;Inherits=elementary&#xA;Directories=places/scalable,places/symbolic&#xA;&#xA;[places/scalable]&#xA;Size=512&#xA;Context=Places&#xA;Type=Scalable&#xA;MinSize=16&#xA;MaxSize=512&#xA;&#xA;[places/symbolic]&#xA;Context=Places&#xA;Size=16&#xA;MinSize=16&#xA;MaxSize=512&#xA;Type=Scalable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By including only references to the icons you want, everything else should be inherited from the vanilla &lt;code&gt;elementary&lt;/code&gt; icons.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-13T13:20:13.837" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7759" PostTypeId="2" ParentId="5331" CreationDate="2016-09-13T13:45:21.290" Score="2" Body="&lt;p&gt;To expand on &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7756/5722&quot;&gt;Peter's answer&lt;/a&gt;, many GTK+ themes (elementary included) have a dark variant which can be enabled for any GTK+ application by setting &lt;code&gt;Gtk.Settings.get_default ().gtk_application_prefer_dark_theme = true;&lt;/code&gt;. You can find the corresponding line which the &lt;em&gt;Videos&lt;/em&gt; app uses to toggle the dark theme &lt;a href=&quot;http://bazaar.launchpad.net/~audience-members/audience/trunk/view/head:/src/Audience.vala#L74&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; if you're interested.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As to why, it emphasises the actual content and minimises distractions from light pollution. The Gnome developer documentation has this to say:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Some applications benefit from minimizing the amount of light pollution that interferes with the content. Good candidates for dark themes are photo and video editors that make the actual content get all the attention and minimize the distraction of the chrome.&#xA;  Dark themes should not be used for documents, where large spaces are white/light and the dark chrome creates too much contrast (web browser, text editor...).&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-14T13:34:18.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7760" PostTypeId="2" ParentId="7714" CreationDate="2016-09-13T13:56:01.577" Score="2" Body="&lt;p&gt;I was having a problem once where I changed my user account password and then my key-chain popped up when I logged into the system, or launched chrome. You just need to put in your original key-chain password if this is what is happening to you. If it's not then you could always manually go in and change your key-chain password so that it automatically saves your data. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another, easier, way around this is to log into google chrome using your google account and download lastpass password manager and that can act as your online key-chain.&lt;/p&gt;&#xA;" OwnerUserId="6247" LastActivityDate="2016-09-13T13:56:01.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7761" PostTypeId="1" CreationDate="2016-09-13T14:28:19.390" Score="2" ViewCount="1519" Body="&lt;p&gt;After installation of Nvidia proprietary drivers window control buttons doesn't work (elementary OS apps window buttons work but rest [firefox, playonlinux] doesn't). In addition switching windows doesn't work always and system occasionally freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Nvidia GeForce GT 330M. Installed driver via &lt;p&gt;&#xA;&lt;code&gt; sudo apt install nvidia-current &lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can i fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="5899" LastEditorUserId="308" LastEditDate="2018-08-07T18:16:52.833" LastActivityDate="2019-01-05T06:02:25.490" Title="How can I stop drivers for Nvidia GeForce GT 330M causing issues in Loki?" Tags="|release-loki|graphic-drivers|drivers|nvidia|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7763" PostTypeId="1" CreationDate="2016-09-13T14:43:57.107" Score="3" ViewCount="6029" Body="&lt;p&gt;So I'm  having the following issues&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;W: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/loki/main/binary-amd64/Packages  404  Not Found&#xA;E: Failed to fetch http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/dists/loki/main/source/Sources  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;can anyone tell me what's going on? I did a clean install of loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wanted to try the solution from &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3780/update-error-sudo-apt-get-update&quot;&gt;here&lt;/a&gt; but it's not applicable exactly for my situation and I didn't know how to alter it for me. Any help would be appreciated. &lt;/p&gt;&#xA;" OwnerUserId="6247" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2018-01-24T22:55:33.130" Title="Getting errors when trying to run sudo apt-get update" Tags="|release-loki|pantheon-terminal|" AnswerCount="4" CommentCount="0" ClosedDate="2018-02-12T09:58:27.073" ContentLicense="CC BY-SA 3.0" />
  <row Id="7764" PostTypeId="1" CreationDate="2016-09-13T14:45:36.053" Score="1" ViewCount="163" Body="&lt;p&gt;When Click Sharing in Network &amp;amp; Wireless, system settings to force quit?&lt;/p&gt;&#xA;" OwnerUserId="6294" LastEditorUserId="9" LastEditDate="2016-09-13T19:31:47.283" LastActivityDate="2016-09-14T17:57:11.553" Title="System Settings Sharing" Tags="|release-loki|sharing|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-14T17:57:24.860" ContentLicense="CC BY-SA 3.0" />
  <row Id="7765" PostTypeId="1" AcceptedAnswerId="7873" CreationDate="2016-09-13T14:53:33.717" Score="1" ViewCount="1288" Body="&lt;p&gt;pretty much the title- version 0.4/loki&lt;br&gt;&#xA; using either parallels 11 or 12, after i install parallels tools the cursor is invisible (I can still click things on the desktop)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things i tried-&lt;br&gt;&#xA; 1. Reinstalling&lt;br&gt;&#xA; 2. Disable Vsync&lt;br&gt;&#xA; 3. Disable 3D acceleration&lt;/p&gt;&#xA;" OwnerUserId="6295" LastActivityDate="2016-09-15T13:19:15.877" Title="Cursor disappears after installing parallels tools in loki" Tags="|release-loki|virtualization|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7766" PostTypeId="2" ParentId="29" CreationDate="2016-09-13T15:19:54.957" Score="9" Body="&lt;p&gt;There's no point of running that script (that downloads Dropbox again, plus another time for the executable).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just unset the dropbox application from the startup applications (Parameters=&gt; Applications =&gt; Startup)&lt;br&gt;&#xA;And then create a new startup application with these instructions  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will get a nice dropbox icon ! ;-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WATCH OUT&lt;/strong&gt; for the single quotes !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;ATTENTION&lt;/strong&gt;: To get the &lt;em&gt;legacy&lt;/em&gt; indicators (like &lt;em&gt;Dropbox&lt;/em&gt;) displayed, you will need to install &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-indicators&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="2329" LastEditDate="2018-11-29T15:23:54.920" LastActivityDate="2018-11-29T15:23:54.920" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="7767" PostTypeId="2" ParentId="256" CreationDate="2016-09-13T15:31:39.497" Score="-1" Body="&lt;p&gt;The above solution (with the plugin and elementary+) does not work for Loki.&lt;br&gt;&#xA;The &lt;code&gt;libmarlin-dropbox.so&lt;/code&gt; file is not even copied to &lt;code&gt;/usr/lib&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also install Caja Dropbox that seems better integrated (but that would mean using caja instead of files).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can be done :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;either from the command line &lt;code&gt;sudo apt install caja-dropbox caja&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;or from the Application Center&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="2329" LastEditDate="2016-09-13T16:15:10.590" LastActivityDate="2016-09-13T16:15:10.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7768" PostTypeId="1" CreationDate="2016-09-13T15:34:42.573" Score="0" ViewCount="372" Body="&lt;p&gt;I'm new to Linux...I already have the Elementary OS installed on my computer. In order to get the update, what's the simplest way of getting Loki? Are there any terminal commands I can run? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="6297" LastActivityDate="2016-09-13T15:41:28.463" Title="elementary OS update?" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-15T16:05:11.290" ContentLicense="CC BY-SA 3.0" />
  <row Id="7769" PostTypeId="2" ParentId="7550" CreationDate="2016-09-13T15:35:44.390" Score="19" Body="&lt;p&gt;The correct instructions to run are :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it worked for me !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;-i&lt;/code&gt; option is only necessary the first time to install the daemon, but if you've installed &lt;em&gt;dropbox&lt;/em&gt; with the current user, that's already done.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="2329" LastEditDate="2016-09-22T08:18:44.453" LastActivityDate="2016-09-22T08:18:44.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7770" PostTypeId="2" ParentId="7748" CreationDate="2016-09-13T15:37:07.080" Score="0" Body="&lt;p&gt;This question has already been asked &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7254/how-to-publish-an-app-in-elementary-loki-appcenter&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I gather app publishing on App Center will be done through &lt;a href=&quot;https://github.com/elementary/houston&quot; rel=&quot;nofollow noreferrer&quot;&gt;Houston&lt;/a&gt;, which is currently still under development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Blake Kostner, the Houston developer, states:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sorry to say Houston is not ready for prime time yet. The current development focus is the store, and everything needed for the Loki release. We will make an announcement once Houston is released though.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-13T15:37:07.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7771" PostTypeId="2" ParentId="7768" CreationDate="2016-09-13T15:41:28.463" Score="0" Body="&lt;p&gt;You have to download and install the 0.4.0 loki iso. There is no dist-upgrade option available from older versions.&lt;/p&gt;&#xA;" OwnerUserId="6247" LastActivityDate="2016-09-13T15:41:28.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7772" PostTypeId="1" CreationDate="2016-09-13T16:07:21.073" Score="0" ViewCount="1740" Body="&lt;p&gt;Can't get my resolution higher than &quot; 1024 * 768 &quot; while my native resolution should be 1980 * 1080. Also it says that it can't recognize my display &quot;Unknown display&quot; .&#xA;using dell inspiron 15R 5520&#xA;i'm connected to the second display via a vga cable &#xA;attaching the output for the command: $ lspci | grep vga&#xA;&lt;a href=&quot;https://i.stack.imgur.com/d4x81.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d4x81.png&quot; alt=&quot;lspci | grep vga&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/F1HdQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F1HdQ.png&quot; alt=&quot;unknown display&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="478" LastActivityDate="2016-09-18T17:03:00.077" Title="Unknown display, low resolution" Tags="|release-loki|display|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7773" PostTypeId="1" AcceptedAnswerId="7774" CreationDate="2016-09-13T16:24:47.607" Score="0" ViewCount="391" Body="&lt;p&gt;It doesn't happen in Ubuntu, but happens in elementary OS Loki.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/pGOeY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pGOeY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No devices found in platform.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;iGPU: intel HD4600&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-09-13T16:44:10.513" Title="Why does the clinfo show that no devices found in platform?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7774" PostTypeId="2" ParentId="7773" CreationDate="2016-09-13T16:44:10.513" Score="0" Body="&lt;p&gt;I installed beignet, and it was solved.&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-09-13T16:44:10.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7775" PostTypeId="2" ParentId="5504" CreationDate="2016-09-13T16:47:57.730" Score="3" Body="&lt;p&gt;modify osd in gtk.css in Gtk3 folder &lt;/p&gt;&#xA;" OwnerUserId="6298" LastActivityDate="2016-09-13T16:47:57.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7776" PostTypeId="1" AcceptedAnswerId="9527" CreationDate="2016-09-13T17:31:14.970" Score="5" ViewCount="679" Body="&lt;p&gt;I cannot search in application menu launcher (hmm, i think it's slingshot). I can open the menu and launch the applications from menu. But, I really cannot search in the app-menu-launcher. I don't know what was wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4vf3P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4vf3P.png&quot; alt=&quot;app-menu-launcher&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6300" LastEditorUserId="26" LastEditDate="2016-09-25T16:13:12.997" LastActivityDate="2019-11-04T04:37:38.143" Title="Cannot search in application menu launcher" Tags="|slingshot|" AnswerCount="3" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7777" PostTypeId="1" AcceptedAnswerId="7779" CreationDate="2016-09-13T17:51:40.883" Score="2" ViewCount="6357" Body="&lt;p&gt;Plank comes with a white background that the icons seem to hover over. Since I'm using plank on the left side of the screen, the background is not really necessary and kind of bugs me. I remember having a transparent background in freya, but I can't remember where the setting can be found and changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas for Loki? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2019-07-24T22:43:35.237" Title="How to get a transparent background for plank?" Tags="|release-loki|plank|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7779" PostTypeId="2" ParentId="7777" CreationDate="2016-09-13T18:36:50.047" Score="8" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Ctrl + right click on a plank icon  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In this menu you can now click on preferences (of plank)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;There you can choose between some themes...choose 'transparent'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2016-09-13T18:36:50.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7781" PostTypeId="2" ParentId="7764" CreationDate="2016-09-13T18:46:22.100" Score="1" Body="&lt;p&gt;Please update your system. This was a bug but it's fixed.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7567/can-not-set-sharing-in-loki-final-release/7569#7569&quot;&gt;See here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6165" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-14T17:57:11.553" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7782" PostTypeId="1" AcceptedAnswerId="7790" CreationDate="2016-09-13T19:44:00.520" Score="1" ViewCount="1398" Body="&lt;p&gt;Mail is holding on to cached account settings. So now no matter how many times I delete the email account from the Systems Setting online account the SMTP settings wont clear when I re-enter the account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also in the Mail app the Accounts settings panel is too long(vertically) so you can't see the apply/OK, cancel buttons.&lt;/p&gt;&#xA;" OwnerUserId="6303" LastEditorUserId="6303" LastEditDate="2016-09-13T19:55:55.373" LastActivityDate="2016-09-13T21:31:26.177" Title="How can I clear the cached settings for Mail?" Tags="|release-loki|applications|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7783" PostTypeId="1" CreationDate="2016-09-13T19:49:02.927" Score="0" ViewCount="508" Body="&lt;p&gt;Today i've noticed my appcenter is not installing removing or cheching for updates. When i try to install something the bar just shows &quot;starting&quot; and then nothing happens.I tried to reinstall it but its still the same. I dont want to use other package managers since appcenter is more integrated and simple please help.I also tried to remove ppas related with elementary and write sudo apt-get update- upgrade but still no chance&lt;/p&gt;&#xA;" OwnerUserId="4906" LastEditorUserId="4906" LastEditDate="2016-09-14T12:12:21.400" LastActivityDate="2016-09-25T16:55:57.350" Title="Something Wrong With elementary appcenter" Tags="|release-loki|elementary-website|appcenter|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-25T16:56:14.213" ContentLicense="CC BY-SA 3.0" />
  <row Id="7785" PostTypeId="1" CreationDate="2016-09-13T20:38:30.537" Score="1" ViewCount="1322" Body="&lt;p&gt;I installed loki on both, VMware Player and VirtualBox; it did not install software center on either. I tried to install it (1) from the appcenter - and like described in a previous note, it just hung showing 'starting'. (2) I tried a manual install with apt-get install software-center - it showed serveral failures with the basic message: No module named 'softwarecenter.distro.&quot;elementary&quot;'. &#xA;It did create the software center icon... but it can't be executed. Removing software center with apt-get purge software-center also results in several&#xA;error messages, with a final pop-up to report the problem. As the documentation describes software center as a basic 'feature' of elementary this really should work straight out of the box!&lt;/p&gt;&#xA;" OwnerUserId="6305" LastActivityDate="2016-09-13T21:18:18.313" Title="There is no Software Center, and I cannot install it" Tags="|system-installation|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7786" PostTypeId="2" ParentId="7765" CreationDate="2016-09-13T20:45:46.390" Score="1" Body="&lt;p&gt;this fixed for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;shutdown the vm. open configure -&gt; Hardware -&gt; Boot Order. expand &quot;Advanced Options&quot; and type the following in the text box for Boot flags:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;devices.usb.mouse=0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;save and start the vm.&lt;/p&gt;&#xA;" OwnerUserId="6306" LastActivityDate="2016-09-13T20:45:46.390" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7788" PostTypeId="2" ParentId="7785" CreationDate="2016-09-13T21:18:18.313" Score="1" Body="&lt;p&gt;Here is something that I found on:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;&lt;a href=&quot;https://itsfoss.com/fix-application-installation-issues-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/fix-application-installation-issues-elementary-os-loki/&lt;/a&gt;&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;&quot;Now, there are two ways to install the .deb packages: command line way and GUI way.&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;If you go by command line, there are numerous ways to install the .deb packages but I’ll go with the simplest one. Open a terminal and use the following command:&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;sudo apt install &lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;Alternatively, you can use a dedicated GUI application gDebi. gDebi is a lightweight and yet powerful application for installing .deb packages. It is particularly useful in handling dependencies. This is why I have often advised to make gDebi the default application to install programs.&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;You can install gDebi from the AppCenter. Just search for it. You can also install it via the command line. Just use the command below:&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;sudo apt install gdebi&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;Once you have installed gDebi, right click on the .deb package and choose to open with gDebi. That’s it.&quot;&lt;/p&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is also the soluntion found by this user.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/7191/5824&quot;&gt;https://elementaryos.stackexchange.com/a/7191/5824&lt;/a&gt;&lt;/p&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;By doing this you should be able to install ubuntu software-center as they have explained.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="5824" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-13T21:18:18.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7789" PostTypeId="2" ParentId="7783" CreationDate="2016-09-13T21:25:20.967" Score="0" Body="&lt;p&gt;Would it be worth a try to open the terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot the machine and see if that works?&lt;/p&gt;&#xA;" OwnerUserId="5824" LastEditorUserId="26" LastEditDate="2016-09-25T16:55:57.350" LastActivityDate="2016-09-25T16:55:57.350" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7790" PostTypeId="2" ParentId="7782" CreationDate="2016-09-13T21:31:26.177" Score="3" Body="&lt;p&gt;Well, you can see the content in the Pantheon Mail folder with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls .local/share/pantheon-mail/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You going to see a folder with the names of your e-mail accounts, something like my_name@example.com, so you can delete that folder with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf .local/share/pantheon-mail/my_name@example.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course you can delete completely the folder of Pantheon Mail:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf .local/share/pantheon-mail/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And that is all, i suppose that is what you wanna to do.&lt;/p&gt;&#xA;" OwnerUserId="6249" LastActivityDate="2016-09-13T21:31:26.177" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7791" PostTypeId="1" CreationDate="2016-09-13T22:09:14.767" Score="-1" ViewCount="813" Body="&lt;p&gt;I noticed something weird, I can snap one window but not another. Is this done purposely or is this a bug? So meaning that I can't snap two windows side by side.&lt;/p&gt;&#xA;" OwnerUserId="6303" LastActivityDate="2016-09-14T16:42:41.543" Title="How come Loki does not have the window snap feature?" Tags="|release-loki|pantheon-files|desktop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7792" PostTypeId="1" CreationDate="2016-09-13T22:09:31.247" Score="1" ViewCount="72" Body="&lt;p&gt;In freya with geary it was possible to zoom the message permanent with a '&lt;em&gt;user-message.css&lt;/em&gt;' -file in &lt;em&gt;/home/user/.config/geary&lt;/em&gt;   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Content&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;body { zoom: 1.4; }&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Now in loki it doesn't work anymore even if you create the file in&lt;br&gt;&#xA;&lt;em&gt;/home/user/.config/pantheon-mail&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some help or info here if this is still possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thx J.Ar&lt;/p&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2016-09-13T22:09:31.247" Title="'Message zoom' in pantheon-mail possible?" Tags="|release-loki|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7793" PostTypeId="1" CreationDate="2016-09-13T22:19:44.847" Score="0" ViewCount="277" Body="&lt;p&gt;I have a MacBook 4.1 (the black one) and I'm trying to use it again with elementary OS Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I manage to make a USB Bootable, and now i'm trying to install the OS. I want to make Elementary my standalone system. OSX doesn't work that it use to, so I want to remove it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When boot in Elementary, everithing worlks fine, I can test all the apps and I can install. The installation process is ok. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is when the installation software try to install grub. It simply crash. The problem is that it is not able to install grub. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the information I have consulted in the internet says that everuthing should work, so i don't understand. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please can anyone help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the last Loki Build. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you all. &lt;/p&gt;&#xA;" OwnerUserId="1224" LastActivityDate="2016-09-15T10:14:55.087" Title="Problems intalling Elementary OS on a MacBook 4.1" Tags="|system-installation|grub|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7794" PostTypeId="2" ParentId="7730" CreationDate="2016-09-13T23:11:18.440" Score="3" Body="&lt;p&gt;I finally managed to figure it out. For anyone else who has been having trouble importing music into Noise, follow these steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open Noise settings&lt;/li&gt;&#xA;&lt;li&gt;Preferences&lt;/li&gt;&#xA;&lt;li&gt;Music Folder Location: (Default: Music)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Then change the default location and it will begin loading from what was previously selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case, I had all my music in the music folder which was not being imported. When I went to change this setting I flipped the option to Downloads and then it immediately started importing the music from the Music folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps anyone else having this issue!&lt;/p&gt;&#xA;" OwnerUserId="2667" LastActivityDate="2016-09-13T23:11:18.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7795" PostTypeId="1" CreationDate="2016-09-13T23:18:43.997" Score="1" ViewCount="61" Body="&lt;p&gt;When I right click the top bar of an application nothing happens, when i try that with an application that is marked as always on top (through wine) it sometimes switches between always on top and not(doesn't work always).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded elementary again and tested it on liveCD and it had the same bug.&lt;/p&gt;&#xA;" OwnerUserId="6269" LastEditorUserId="26" LastEditDate="2016-09-25T16:05:01.777" LastActivityDate="2016-09-25T16:05:01.777" Title="Right-click panel doesn't show on applications that didn't come with elementary loki" Tags="|wine|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-09T00:24:06.613" ContentLicense="CC BY-SA 3.0" />
  <row Id="7799" PostTypeId="1" CreationDate="2016-09-14T01:46:42.247" Score="0" ViewCount="459" Body="&lt;p&gt;It seems that Loki can't see my discrete GPU (Nvidia GTX1070). Here's the output from a couple of useful commands I've seen listed while trying to debug this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ inxi -Gx&#xA;Graphics:  Card: NVIDIA Device 1b81 bus-ID: 01:00.0&#xA;           Display Server: X.Org 1.18.3 drivers: fbdev (unloaded: vesa) FAILED: nouveau&#xA;           Resolution: 1024x768@76.00hz&#xA;           GLX Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)&#xA;           GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes&#xA;$ lspci | grep VGA&#xA;01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried installing the 370 drivers several times. I always get a black screen upon reboot. Here is the sequence I've tried many times:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install nvidia-370&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After reboot, I get a black screen. I then purge the nvidia driver and reboot into omfg low-resolution mode (purgatory?). My monitor is 4K and I'd like to use those pixels...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki is also unable to identify my LG monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6ta2g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6ta2g.png&quot; alt=&quot;System Settings &amp;gt;&amp;gt; Displays&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there some &quot;proper&quot; means of installing the Nvidia 370+ drivers?&lt;/p&gt;&#xA;" OwnerUserId="6211" LastEditorUserId="6211" LastEditDate="2016-09-14T02:55:39.887" LastActivityDate="2016-09-14T04:00:42.107" Title="Loki doesn't see my GTX1070" Tags="|release-loki|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7801" PostTypeId="1" CreationDate="2016-09-14T01:55:01.170" Score="1" ViewCount="516" Body="&lt;p&gt;How do you share files in elementary OS? What is the install procedure for Samba? I cannot see elementary OS on my network at all, Linux or Win&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Really need to be able to stream content from Win to elementary OS, could you please advise, i know it's not ideal but it is what it is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cannot see elementary OS from my UB Mate laptop, even if I turn on the sharing in elementary OS&lt;/p&gt;&#xA;" OwnerUserId="6312" LastEditorUserId="308" LastEditDate="2018-08-07T16:59:50.513" LastActivityDate="2018-08-07T16:59:50.513" Title="Sharing files linux to linux, or linux to windows" Tags="|networking|samba|sharing|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="7802" PostTypeId="2" ParentId="7791" CreationDate="2016-09-14T02:54:43.843" Score="4" Body="&lt;p&gt;What do you mean? Window snapping is definitely there in Loki (source: I'm using it right now on Chrome, snapped to full-screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that some windows have fixed, forced sizes, and therefore cannot be altered by the window manager. Thus these devices will not snap into place.&lt;/p&gt;&#xA;" OwnerUserId="5738" LastActivityDate="2016-09-14T02:54:43.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7803" PostTypeId="1" CreationDate="2016-09-14T03:16:53.767" Score="0" ViewCount="127" Body="&lt;p&gt;I tried to upgrade straight to Loki but the installer asks for a password that I do not know. What is the password?&lt;/p&gt;&#xA;" OwnerUserId="6314" LastEditorUserId="5565" LastEditDate="2016-09-28T15:07:36.333" LastActivityDate="2016-10-04T07:31:37.527" Title="What is the password to update the previous elementary to Loki?" Tags="|release-loki|security|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7804" PostTypeId="2" ParentId="7799" CreationDate="2016-09-14T04:00:42.107" Score="1" Body="&lt;p&gt;The issue was with UEFI Secure Boot. I have an ASUS motherboard. I booted into BIOS and then disabled Secure Boot. To install the latest driver I used,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install nvidia-370&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then everything was perfect!&lt;/p&gt;&#xA;" OwnerUserId="6211" LastActivityDate="2016-09-14T04:00:42.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7808" PostTypeId="1" CreationDate="2016-09-14T07:29:58.073" Score="3" ViewCount="1432" Body="&lt;p&gt;In the software center you get Filezilla 3.7.3. (It was the same on Linux Mint, I used before).&#xA;But unfortunately I used a newer version for years on Mageia before. &#xA;Importing the server-bookmarks now is possible but they can´t connect as the password is stored encrypted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I want to install a newer version of Filezilla, but I don´t succeed. On Linux Mint it works with this ppa:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:n-muench/programs-ppa&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But not on Elementary - do you have a hint for me?&#xA;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="6317" LastActivityDate="2016-10-01T04:56:59.023" Title="Newer version of Filezilla on Elementary" Tags="|updates|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7809" PostTypeId="1" CreationDate="2016-09-14T07:39:57.493" Score="1" ViewCount="168" Body="&lt;p&gt;Two problems I encountered using Pantheon Mail in elementary OS Loki:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I am using Pantheon Mail with 3 mail accounts. Everytime I log in to elementary OS Loki mail keeps asking for passwords although the checkbox for remembering passwords is checked.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also at startup Mail asks if the certificate of my university mail account can be trusted. I click &quot;always trust certificate&quot; and an error message occurs stating that there is no place to save changes for the certificate.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help and suggestions. If it helps I could upload a screenshot of the error message in german language.&lt;/p&gt;&#xA;" OwnerUserId="4071" LastEditorUserId="308" LastEditDate="2018-08-07T18:05:13.087" LastActivityDate="2019-11-24T00:43:17.757" Title="Pantheon Mail certificate and PW problems" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="2" ClosedDate="2019-11-24T11:37:18.303" ContentLicense="CC BY-SA 4.0" />
  <row Id="7810" PostTypeId="1" AcceptedAnswerId="7819" CreationDate="2016-09-14T07:58:28.320" Score="1" ViewCount="966" Body="&lt;p&gt;By default the notification for low battery is at 10%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7H0Hf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7H0Hf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The critically low notification is at about 3% and the imminent shutdown  notification comes immediately after. I find these levels to be too low. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can they be changed somehow?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-09-14T08:45:36.097" LastActivityDate="2016-09-14T12:08:05.680" Title="Set level of battery notification in Loki" Tags="|release-loki|notifications|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7811" PostTypeId="1" AcceptedAnswerId="7812" CreationDate="2016-09-14T08:04:02.860" Score="2" ViewCount="196" Body="&lt;p&gt;By default when an external display is connected it appears as extended to the right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Displays settings this can be changed and also one can be closed, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mxnk3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mxnk3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can displays settings be cycled with a keyboard shortcut between extended, left, right, mirror?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-09-14T08:13:40.303" LastActivityDate="2017-01-23T12:36:12.637" Title="How to cycle displays in Loki?" Tags="|release-loki|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7812" PostTypeId="2" ParentId="7811" CreationDate="2016-09-14T08:13:04.037" Score="2" Body="&lt;pre&gt;&lt;code&gt;sudo apt install disper&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More details on various arguments, &lt;a href=&quot;http://manpages.ubuntu.com/manpages/precise/man1/disper.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command to cycle between clone, extended, internal and external displays should be like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;disper --cycle-stages='-e : -c : -S : -s' --cycle&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In that case, it would extend to the right. To cycle between the same options but extend to the left:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;disper --direction=left --cycle-stages='-e : -c : -S : -s' --cycle&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command can be then associated to a short-key like the Super-P/Display key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart may be needed to see changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disper will detect displays and use the maximal resolutions by default. If no external display is connected, nothing will happen when the short-key is touched.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;While it works fine with a shortcut, the &lt;code&gt;disper&lt;/code&gt; command doesn't work with a launcher in Loki: trying to create a dock launcher to cycle displays in this way freezes completely the desktop and I have to log out in console (Ctrl-Alt-f1) and use &lt;code&gt;killall -u &amp;lt;username&amp;gt;&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how to cycle displays with a launcher but, in order to get as close to that as possible, one could add all the needed commands as &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9424/170&quot;&gt;desktop actions&lt;/a&gt; within a single launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the separate commands for the different display settings that need to be cycled, &lt;code&gt;xrandr&lt;/code&gt; can be used (without the need for &lt;code&gt;disper&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do &lt;code&gt;xrandr -q&lt;/code&gt; to see the name of the displays. Let's say that we get &lt;code&gt;LVDS1&lt;/code&gt; for internal and &lt;code&gt;VGA1&lt;/code&gt; for external display. Then, a launcher could be created:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local.share/applications/cycle-displays.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Cycle displays&#xA;Exec=xrandr --output VGA1 --off --output LVDS1 --auto &#xA;Icon=unity-display-panel&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-Unity-Settings-Panel;&#xA;&#xA;Actions=extended1;extended2;external;internal&#xA;&#xA;[Desktop Action extended1]&#xA;Icon=extended-internal&#xA;Name=Extend to left ~ primary internal&#xA;Exec=xrandr --output VGA1 --auto --left-of LVDS1 --output LVDS1 --auto --primary &#xA;&#xA;[Desktop Action extended2]&#xA;Icon=extended-external&#xA;Name=Extend to left ~ primary external&#xA;Exec=xrandr --output VGA1 --auto --left-of LVDS1 --primary --output LVDS1 --auto  &#xA;&#xA;[Desktop Action external]&#xA;Icon=LCD&#xA;Name=External display only&#xA;Exec=xrandr --output VGA1 --auto --output LVDS1 --off &#xA;&#xA;[Desktop Action internal]&#xA;Icon=laptop&#xA;Name=Internal display only&#xA;Exec=xrandr --output VGA1 --off --output LVDS1 --auto&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After adding some icons to &lt;code&gt;~/.local/share/icons&lt;/code&gt;, drag&amp;amp;drop the launcher onto Plank and, right-clicking on it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AqRib.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AqRib.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each command is set under a &lt;code&gt;[Desktop Action]&lt;/code&gt; (all are listed after &lt;code&gt;Actions=&lt;/code&gt;). As an &lt;code&gt;Exec=&lt;/code&gt; line is mandatory under &lt;code&gt;[Desktop Entry]&lt;/code&gt;, in this example it runs the same as &quot;Internal display only&quot;. So, just left click the launcher for that.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-23T12:36:12.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7814" PostTypeId="1" AcceptedAnswerId="7822" CreationDate="2016-09-14T08:21:50.663" Score="2" ViewCount="1751" Body="&lt;p&gt;By default, the battery notification says that shutdown is imminent at about 3% .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Can the laptop be made to suspend at this point instead of shutting down?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After finding &lt;a href=&quot;https://askubuntu.com/a/800398/47206&quot;&gt;this answer&lt;/a&gt;, I see that &lt;strong&gt;&lt;em&gt;low and critical battery percentage is now handled by UPower and not by gsettings and that instead of using gsettings, one should now edit the file &lt;code&gt;/etc/UPower/UPower.conf&lt;/code&gt;&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That works for editing battery levels to be considered low and critical and the level for action, but not for setting the action itself which is still shutdown, even though the line there is &lt;code&gt;CriticalPowerAction=HybridSleep&lt;/code&gt;. That is the default anyway, and was there already. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As specified by that file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# The action to take when &quot;TimeAction&quot; or &quot;PercentageAction&quot; above has been&#xA;# reached for the batteries (UPS or laptop batteries) supplying the computer&#xA;#&#xA;# Possible values are:&#xA;# PowerOff&#xA;# Hibernate&#xA;# HybridSleep&#xA;#&#xA;# If HybridSleep isn't available, Hibernate will be used&#xA;# If Hibernate isn't available, PowerOff will be used&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is Hybridsleep different than Sleep? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After making the changes mentioned above, &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7819/170&quot;&gt;I can set the critical battery percentage&lt;/a&gt; to take action at - but &lt;strong&gt;should I look for another setting on the action to take&lt;/strong&gt; - or is Hybridsleep the only option permitted by the system (while my machine cannot use that)? &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-16T09:09:21.813" Title="Suspend instead of shutdown on critical battery level?" Tags="|release-loki|suspend|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7815" PostTypeId="2" ParentId="7808" CreationDate="2016-09-14T08:23:02.853" Score="2" Body="&lt;p&gt;Loki removed the ability to install from PPAs out-of-the-box. You can restore this functionality by installing the &lt;code&gt;software-properties-common&lt;/code&gt; package and then adding the PPA as before.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:n-muench/programs-ppa&#xA;sudo apt update&#xA;sudo apt install filezilla&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-14T08:23:02.853" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7816" PostTypeId="1" CreationDate="2016-09-14T08:26:52.810" Score="0" ViewCount="404" Body="&lt;p&gt;I upgraded from Freya to Loki recently on my Chromebook (clean install, no crouton etc.). &#xA;When I try to restart the Chromebook from suspend the display stays dark and needs to be rebooted. On Freya everything worked just fine... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice or suggestions? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx&lt;/p&gt;&#xA;" OwnerUserId="4071" LastActivityDate="2016-10-28T01:57:09.003" Title="eOS Loki on Chromebook wont start after suspend" Tags="|release-loki|suspend|chromebook|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7819" PostTypeId="2" ParentId="7810" CreationDate="2016-09-14T09:54:55.020" Score="2" Body="&lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/a/800398/47206&quot;&gt;this answer&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Low and critical battery percentage is now handled by UPower and not by &lt;code&gt;gsettings&lt;/code&gt; (more &lt;a href=&quot;https://askubuntu.com/a/92818/47206&quot;&gt;here&lt;/a&gt;). Instead of using gsettings, you should now edit the file &lt;code&gt;/etc/UPower/UPower.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;gedit&lt;/code&gt; text editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/UPower/UPower.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UsePercentageForPolicy=true&#xA;PercentageLow=15&#xA;PercentageCritical=10&#xA;PercentageAction=8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QaQlR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QaQlR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the rest changed accordingly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only the setting for the action after critical level (line &lt;code&gt;CriticalPowerAction=HybridSleep&lt;/code&gt;) &lt;a href=&quot;https://elementaryos.stackexchange.com/q/7814/170&quot;&gt;didn't work&lt;/a&gt; until I have created a swap space.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-14T12:08:05.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7821" PostTypeId="2" ParentId="7577" CreationDate="2016-09-14T11:44:42.050" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;Create file: &lt;code&gt;sudo touch /etc/libuser.conf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run with sudo: &lt;code&gt;sudo system-config-samba&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;*** Work for me!&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="6321" LastActivityDate="2016-09-14T11:44:42.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7822" PostTypeId="2" ParentId="7814" CreationDate="2016-09-14T12:01:22.830" Score="4" Body="&lt;p&gt;This setting is now handled by the Upower tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As indicated in &lt;code&gt;/etc/UPower/UPower.conf&lt;/code&gt;, &lt;strong&gt;Upower does not support Suspend/Sleep, but instead supports Hybrid-sleep&lt;/strong&gt;, which is a middle between hibernation and sleep. It is similar to Sleep/suspend in that it comes back to full operation very quickly because it constantly refreshes the RAM, but it also similar to Hiberantion because it 'swaps' RAM data to the hard disk and is able to restore it in case of power cut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because it saves RAM data to the hard disk, just like hibernation, &lt;strong&gt;the hybrid-sleep needs a swap partition&lt;/strong&gt;. On my system I didn't had one, and that's why Upower used PowerOff insted. I created one swap space following &lt;a href=&quot;https://askubuntu.com/a/33700/47206&quot;&gt;this answer&lt;/a&gt;, and then, with the line &lt;code&gt;CriticalPowerAction=HybridSleep&lt;/code&gt; in  &lt;code&gt;/etc/UPower/UPower.conf&lt;/code&gt; and then the computer entered hybrid sleep at the percentage set by the line &lt;code&gt;PercentageAction=8&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The notifications now say &quot;hibernate&quot;, but it is HybridSleep in fact.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H4EHG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H4EHG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7v9EJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7v9EJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, to set percentage for this action, edit the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PercentageAction=8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;while this line should look like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UsePercentageForPolicy=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To set the low and critical percentages, edit these lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PercentageLow=15&#xA;PercentageCritical=10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before setting the swap space the commands &lt;code&gt;systemctl hybrid-sleep&lt;/code&gt; and &lt;code&gt;systemctl hibernate&lt;/code&gt; gave an error message. Now, &lt;code&gt;systemctl hybrid-sleep&lt;/code&gt; puts the computer to sleep (which I trusted is hybrid sleep), but &lt;code&gt;systemctl hibernate&lt;/code&gt; shuts down the system completely instead of hibernating it, that is: when I start it back the system is logged off and all my programs are closed. (This makes me think that maybe hibernation and swapping RAM data to hard disk don't work on my hardware and, although swap space is needed to use the option 'HybridSleep' in Upower settings, what happens on my system is not really Hybrid-Sleep, but just Sleep.)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-09-16T09:09:21.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7824" PostTypeId="2" ParentId="7803" CreationDate="2016-09-14T12:30:38.363" Score="-2" Body="&lt;p&gt;You have to install from zero.&lt;/p&gt;&#xA;" OwnerUserId="6320" LastEditorUserId="6320" LastEditDate="2016-10-04T07:31:37.527" LastActivityDate="2016-10-04T07:31:37.527" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7825" PostTypeId="1" AcceptedAnswerId="8288" CreationDate="2016-09-14T12:38:09.547" Score="1" ViewCount="1349" Body="&lt;p&gt;I asked the same &lt;a href=&quot;https://elementaryos.stackexchange.com/q/368/170&quot;&gt;question for Freya&lt;/a&gt; but in Loki the situation is different, none of the two dialogues can be triggered with those commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gnome-session-quit --power-off&lt;/code&gt; used to trigger this dialogue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hZU8S.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hZU8S.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;while the default dialogue was triggered by the command &lt;code&gt;dbus-send --session --print-reply --dest=com.canonical.Unity /org/gnome/SessionManager/EndSessionDialog org.gnome.SessionManager.EndSessionDialog.Open uint32:2 uint32:0 uint32:0 array:objpath:[]&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OSDtB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OSDtB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Asking on the g+ group &lt;a href=&quot;https://elementaryos.stackexchange.com/q/368/170&quot;&gt;here&lt;/a&gt;, the command &lt;code&gt;dbus-send --system --print-reply --dest=/org/freedesktop/login1 org.freedesktop.login1.power_off&lt;/code&gt; was mentioned, but it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the command behind the default Loki Shutdown dialogue? I prefer to use a shortcut for that, especially that the shutdown laptop button triggers no dialogue but suspends directly.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2020-05-18T05:01:30.493" Title="What is the command for the shutdown dialogue in Loki?" Tags="|release-loki|command-line|shutdown|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7826" PostTypeId="2" ParentId="7533" CreationDate="2016-09-14T12:50:33.580" Score="2" Body="&lt;p&gt;AppCenter displayed the installed apps only. Running &lt;code&gt;sudo apt update&lt;/code&gt; did not solve the problem. I had to reinstall AppCenter to fix it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Remove AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge appcenter&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install appcenter&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update repositories:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open AppCenter. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5809" LastActivityDate="2016-09-14T12:50:33.580" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7830" PostTypeId="2" ParentId="7763" CreationDate="2016-09-14T13:54:14.907" Score="1" Body="&lt;p&gt;The elementary PPAs use the underlying Ubuntu release names rather than the elementary release name (see &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason your system is trying to fetch packages from &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/loki&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/loki&lt;/a&gt; instead of &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/xenial&quot; rel=&quot;nofollow&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/xenial&lt;/a&gt; (Loki is based on Ubuntu 16.04 LTS (Xenial Xerus) ). You can rectify this by modifying &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and replacing occurrences of &lt;code&gt;ubuntu/dists/loki&lt;/code&gt; with &lt;code&gt;ubuntu/dists/xenial&lt;/code&gt; and then re-running &lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quite &lt;em&gt;why&lt;/em&gt; this has happened I am unsure. You should file a bug report about it on Launchpad.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-14T13:54:14.907" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7831" PostTypeId="2" ParentId="7629" CreationDate="2016-09-14T14:03:33.947" Score="1" Body="&lt;p&gt;I solved it. IPv6 doesn't need to be stopped. I needed to add the line &quot;mtu=1492&quot; in the file /etc/NetworkManager/system-connections/&lt;em&gt;Connection name&lt;/em&gt; like this:&#xA;&lt;br/&gt;&#xA;&lt;br/&gt;&#xA;[ppp]&lt;br/&gt;&#xA;lcp-echo-failure=5&lt;br/&gt;&#xA;lcp-echo-interval=30&lt;br/&gt;&#xA;mtu=1492&#xA;&lt;br/&gt;&#xA;&lt;br/&gt;&#xA;After making the DSL connection at first, of course. Then reboot and updates are working, and software is visible in AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-09-14T14:03:33.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7832" PostTypeId="1" AcceptedAnswerId="7841" CreationDate="2016-09-14T15:55:43.637" Score="9" ViewCount="6381" Body="&lt;p&gt;I just installed elementary os Loki and I can't find an option for Google accounts or Microsoft in the online accounts menu. Is there any way I can install them?&#xA;Thanks, Ben&lt;/p&gt;&#xA;" OwnerUserId="6326" LastActivityDate="2020-03-26T17:42:15.760" Title="No Google or Microsoft account option in System settings" Tags="|settings|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7833" PostTypeId="1" CreationDate="2016-09-14T16:09:39.247" Score="1" ViewCount="1040" Body="&lt;p&gt;I have three differents problems with Mail app (in loki):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Keep asking the password even if &quot;Remember password&quot; is enabled&lt;/strong&gt;. (I'm using gmail). Mail remembers the password but keep asking it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Can't delete emails.&lt;/strong&gt; When I press the trash icon or &quot;Supr&quot; nothing happens.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;&quot;pantheon-mail --hidden&quot; doesn't work&lt;/strong&gt;. I would like to keep it in background mode when I start my computer but it doesn't work. The app starts asking the password (maybe it's the same problem).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'm very worried about the second problem. I don't think it's a general bug because nobody have posted it in Launchpad. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you help me? :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="6320" LastActivityDate="2017-06-19T19:26:33.337" Title="Mail (Geary): doesn't remember password, can't delete emails and can't start it with &quot;--hidden&quot;" Tags="|release-loki|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7834" PostTypeId="1" CreationDate="2016-09-14T16:32:36.730" Score="2" ViewCount="1405" Body="&lt;p&gt;First off I had installed Freya days before Loki was official. Loved it everything ran great. I decided to try Loki and had absolutely no output devices for sound. After a while, I decided I liked Freya (since sound worked immediately) and now I have reinstalled Freya and updated it. But still no output devices for audio. It is an HP Pavilion g120cy with B&amp;amp;O audio. Please help.&lt;/p&gt;&#xA;" OwnerUserId="6327" LastEditorUserId="26" LastEditDate="2016-10-09T00:13:38.130" LastActivityDate="2017-01-07T01:40:34.187" Title="No sound output after upgrading or installing Loki" Tags="|release-loki|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7836" PostTypeId="2" ParentId="7184" CreationDate="2016-09-14T18:12:48.413" Score="2" Body="&lt;p&gt;Edit the following file: &lt;code&gt;amdgpu-pro-install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on line 74: (it is 74 for me)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#   os_release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;add that hashtag # to os_release&#xA;that calls a function to check for your system type (as far as I understand it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PACKAGES=&quot;amdgpu-pro amdgpu-pro-lib32 amdgpu-pro-dkms&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That is all that function did in case the system was Ubuntu or a derivative,&#xA;so I just copied it from above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That part of your file should now look more or less like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;function amdgpu_pro_install() {&#xA;    local src=$(cd ${0%/*} &amp;amp;&amp;amp; pwd -P)&#xA;    local index=$src/Packages.gz&#xA;&#xA;#   os_release&#xA;    PACKAGES=&quot;amdgpu-pro amdgpu-pro-lib32 amdgpu-pro-dkms&quot;&#xA;    amdgpu_pro_uninstall $@&#xA;&#xA;    if [[ -r $index ]]; then&#xA;        $SUDO mkdir -p $REPOSITORY &amp;amp;&amp;amp; $SUDO cp -af $src/* $_&#xA;        $SUDO ln -s $_/$PROG $SBIN/${PROG%-*}-uninstall&#xA;&#xA;        echo &quot;deb file:$REPOSITORY/ ./&quot; | $SUDO tee $(source_list)&#xA;        $SUDO apt-get update ||:&#xA;        $SUDO apt-get $@ install $PACKAGES&#xA;    fi&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the driver will install (it did for me). I cannot guarantee that the driver will install correctly and your computer will work fine after doing this.&#xA;Consider that this may crash your system before attempting, and you may have to uninstall the driver in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="6329" LastEditorUserId="242" LastEditDate="2016-09-15T17:46:03.833" LastActivityDate="2016-09-15T17:46:03.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7837" PostTypeId="2" ParentId="7833" CreationDate="2016-09-14T19:03:52.313" Score="2" Body="&lt;p&gt;You may need to &lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;enable &quot;less secure&quot; apps&lt;/a&gt; in your Gmail settings. See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2031/792&quot;&gt;this answer&lt;/a&gt; and &lt;a href=&quot;https://support.google.com/accounts/answer/6010255?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;Google Accounts Help&lt;/a&gt; for more details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wouldn't be surprised if a future elementary OS release added Google OAuth login to online accounts, which would prevent users from having to do this. (That's of course 100% speculation, but I still hope it happens! )&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-14T19:03:52.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7838" PostTypeId="2" ParentId="7834" CreationDate="2016-09-14T19:32:29.260" Score="1" Body="&lt;p&gt;Are you dual booting with Windows? If so, the following steps may help:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Shut down your computer.&lt;/li&gt;&#xA;&lt;li&gt;Boot into elementary OS.&lt;/li&gt;&#xA;&lt;li&gt;Restart, and boot into elementary OS again.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;After booting into Windows on my XPS 13, I have to follow these steps to get sound working on eOS. For details on why this problem occurs, see &lt;a href=&quot;https://wiki.archlinux.org/index.php/Dell_XPS_13_(2015)#Audio&quot; rel=&quot;nofollow&quot;&gt;the XPS 13 page in the Arch Wiki&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-14T19:32:29.260" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7839" PostTypeId="2" ParentId="1285" CreationDate="2016-09-14T19:44:20.867" Score="0" Body="&lt;p&gt;I don´t know, if this was the solution of the problem, but since I changed to &quot;Secure Boot&quot; in BIOS (My Virtualbox didn´t work after an update) everything works fine and I can use the y-key for &quot;y&quot; and &quot;z&quot; for &quot;z&quot;!&lt;/p&gt;&#xA;" OwnerUserId="6317" LastEditorUserId="6317" LastEditDate="2016-09-15T06:54:12.063" LastActivityDate="2016-09-15T06:54:12.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7840" PostTypeId="2" ParentId="7832" CreationDate="2016-09-14T19:51:18.793" Score="6" Body="&lt;p&gt;Additional account services are still under development. What's available is already present.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-09-14T19:51:18.793" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7841" PostTypeId="2" ParentId="7832" CreationDate="2016-09-14T19:53:42.380" Score="3" Body="&lt;p&gt;These services aren't yet supported in Online Accounts, but they may be added in the future. From the &lt;a href=&quot;http://blog.elementary.io/post/147637979911/loki-04-stable-release&quot; rel=&quot;nofollow&quot;&gt;release announcement&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The preliminary version of Online Accounts is finally landing in Loki. At the moment, Fastmail and IMAP email accounts are available with more services under development.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;For now, you can log into Mail and Calendar with your Google Account. You can also &lt;a href=&quot;https://support.office.com/en-us/article/Add-your-Outlook-com-account-to-another-mail-app-73f3b178-0009-41ae-aab1-87b80fa94970&quot; rel=&quot;nofollow&quot;&gt;add an Outlook.com account using IMAP&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternately, you could add both Gmail and Outlook.com as IMAP accounts in Online Accounts. Google support has &lt;a href=&quot;https://support.google.com/mail/answer/7126229?hl=en&amp;amp;visit_id=1-636094795547165797-2303127301&amp;amp;rd=1&quot; rel=&quot;nofollow&quot;&gt;details on using IMAP with Gmail&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-14T19:53:42.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7842" PostTypeId="1" CreationDate="2016-09-14T19:57:46.643" Score="3" ViewCount="837" Body="&lt;p&gt;I am trying to change the proxy settings but after I hit apply and close the dialog box it resets the settings back to default after about 10 seconds. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need the proxy to access the internet on my work network which is a MS AD domain which filters web content by user account. I proxy to a machine I am logged into so I access the web and can update the system and install software. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freya worked fine. &lt;/p&gt;&#xA;" OwnerUserId="6330" LastActivityDate="2016-09-27T08:11:31.743" Title="Loki Proxy wont save settings." Tags="|release-loki|networking|" AnswerCount="0" CommentCount="2" ClosedDate="2016-10-09T00:27:50.397" ContentLicense="CC BY-SA 3.0" />
  <row Id="7843" PostTypeId="1" CreationDate="2016-09-14T20:22:59.397" Score="2" ViewCount="152" Body="&lt;p&gt;anyone know how to change text &quot;applications&quot; menu to icon?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have google and try follow instruction in here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6840/how-to-replace-the-applications-text-on-the-wingpanel-with-a-icon&quot;&gt;How to replace wingpanel&amp;#39;s &amp;quot;Applications&amp;quot; text with a icon in Freya&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but stuck in step 4&#xA;maybe that tutor for freya, bcoz I cant find .panel-app-button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="6331" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-14T20:22:59.397" Title="how to change text &quot;applications&quot; to icon elementaryos loki" Tags="|release-loki|elementary-website|" AnswerCount="0" CommentCount="1" ClosedDate="2016-09-25T15:54:16.100" ContentLicense="CC BY-SA 3.0" />
  <row Id="7845" PostTypeId="2" ParentId="6950" CreationDate="2016-09-14T21:29:08.030" Score="2" Body="&lt;p&gt;This is the most problematic network adapter, in order to fix it you need to perform a extensive research, some solutions works for an amount of people, and some not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Useful links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://archrysler.wordpress.com/2016/05/12/ubuntu-16-04-rtl8723be/&quot; rel=&quot;nofollow&quot;&gt;https://archrysler.wordpress.com/2016/05/12/ubuntu-16-04-rtl8723be/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.quora.com/How-do-you-configure-wifi-card-rtl8723be-on-Ubuntu-16-04&quot; rel=&quot;nofollow&quot;&gt;https://www.quora.com/How-do-you-configure-wifi-card-rtl8723be-on-Ubuntu-16-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6334" LastActivityDate="2016-09-14T21:29:08.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7848" PostTypeId="1" CreationDate="2016-09-14T22:12:07.727" Score="6" ViewCount="660" Body="&lt;p&gt;Title says it all. Is this a thing? A changelog for every update in AppCenter (obviously just for elementary apps) would be really helpful.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-23T20:34:59.353" Title="Is there a way to see changelog of update?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7850" PostTypeId="1" CreationDate="2016-09-14T22:49:31.333" Score="0" ViewCount="387" Body="&lt;p&gt;I have a System 76 laptop with nvidia dedicated graphics and am having trouble with the brightness adjustment controls in Pantheon. I have installed the system76-driver-nvidia from their ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to use the inotify/xbacklight based solution detailed here &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://sub-pop.net/post/fedora-23-on-system76-oryx-pro/&quot; rel=&quot;nofollow&quot;&gt;http://sub-pop.net/post/fedora-23-on-system76-oryx-pro/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(which basically uses information from /proc and xbacklight to adjust the brightness) and it doesn't have any effect nor any helpful errors in the logs. This is how I get the display to work properly in GNOME3 on arch. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am hoping that since one of the Elementary OS devs works at system 76 there is a solution that I just haven't found. Thank you in advance for any help that you can give! &lt;/p&gt;&#xA;" OwnerUserId="6333" LastActivityDate="2016-09-26T11:53:37.443" Title="Brightness controls on Oryx Pro with Nvidia on Loki" Tags="|display|nvidia|laptop|brightness|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7851" PostTypeId="1" CreationDate="2016-09-14T23:44:21.740" Score="2" ViewCount="568" Body="&lt;p&gt;Im am using Elementary OS on a laptop and clicking in the middle of the trackpad's buttons would trigger a middle click. I would like to disable that.&lt;/p&gt;&#xA;" OwnerUserId="6339" LastActivityDate="2016-09-20T20:27:12.293" Title="How do I disable the middle click in Loki?" Tags="|release-loki|touchpad|click|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7852" PostTypeId="1" CreationDate="2016-09-15T01:23:37.233" Score="2" ViewCount="846" Body="&lt;p&gt;When I open my computer, elementary OS Loki takes about 10-15 seconds to resume from sleep. The screen is initially off. After a second or two, the backlight turns on but the screen is still black for a while before the login screen appears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resuming from sleep took just a few seconds on eOS Freya. I'm running a Dell XPS 13 from 2015.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts on how I might speed up the process of resuming from sleep? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-01-14T23:33:37.977" Title="Slow resume from sleep" Tags="|release-loki|suspend|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7853" PostTypeId="2" ParentId="7577" CreationDate="2016-09-15T01:50:37.783" Score="0" Body="&lt;p&gt;Run this command: &lt;code&gt;sudo gedit /etc/libuser.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select all this lines and paste into the file (libuser.conf). See libuser.conf(5) for more information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not modify the default module list if you care about unattended calls to programs (i.e., scripts) working!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[import]&#xA;# Data from these files is used when libuser.conf does not define a value.&#xA;# The mapping is documented in the man page.&#xA;login_defs = /etc/login.defs&#xA;default_useradd = /etc/default/useradd&#xA;&#xA;[defaults]&#xA;# The default (/usr/lib*/libuser) is usually correct&#xA;# moduledir = /your/custom/directory&#xA;&#xA;# The following variables are usually imported:&#xA;# skeleton = /etc/skel&#xA;# mailspooldir = /var/mail&#xA;&#xA;crypt_style = md5&#xA;modules = files shadow&#xA;create_modules = files shadow&#xA;# modules = files shadow ldap&#xA;# create_modules = ldap&#xA;&#xA;[userdefaults]&#xA;LU_USERNAME = %n&#xA;# LU_UIDNUMBER = 500&#xA;LU_GIDNUMBER = %u&#xA;# LU_USERPASSWORD = !!&#xA;# LU_GECOS = %n&#xA;# LU_HOMEDIRECTORY = /home/%n&#xA;# LU_LOGINSHELL = /bin/bash&#xA;&#xA;# LU_SHADOWNAME = %n&#xA;# LU_SHADOWPASSWORD = !!&#xA;# LU_SHADOWLASTCHANGE = %d&#xA;# LU_SHADOWMIN = 0&#xA;# LU_SHADOWMAX = 99999&#xA;# LU_SHADOWWARNING = 7&#xA;# LU_SHADOWINACTIVE = -1&#xA;# LU_SHADOWEXPIRE = -1&#xA;# LU_SHADOWFLAG = -1&#xA;&#xA;[groupdefaults]&#xA;LU_GROUPNAME = %n&#xA;# LU_GIDNUMBER = 500&#xA;# LU_GROUPPASSWORD = !!&#xA;# LU_MEMBERUID =&#xA;# LU_ADMINISTRATORUID =&#xA;&#xA;[files]&#xA;# This is useful for the case where some master files are used to&#xA;# populate a different NSS mechanism which this workstation uses.&#xA;# directory = /etc&#xA;&#xA;[shadow]&#xA;# This is useful for the case where some master files are used to&#xA;# populate a different NSS mechanism which this workstation uses.&#xA;# directory = /etc&#xA;&#xA;[ldap]&#xA;# Setting these is always necessary.&#xA;# server = ldap&#xA;# basedn = dc=example,dc=com&#xA;&#xA;# Setting these is rarely necessary, since it's usually correct.&#xA;# userBranch = ou=People&#xA;# groupBranch = ou=Group&#xA;&#xA;# Set only if your administrative user uses simple bind operations to&#xA;# connect to the server.&#xA;# binddn = cn=Manager,dc=example,dc=com&#xA;&#xA;# Set this only if the default user (as determined by SASL) is incorrect&#xA;# for SASL bind operations.  Usually, it's correct, so you'll rarely need&#xA;# to set these.&#xA;# user = Manager&#xA;# authuser = Manager&#xA;&#xA;[sasl]&#xA;# Set these only if your sasldb is only used by a particular application, and&#xA;# in a particular domain.  The default (all applications, all domains) is&#xA;# probably correct for most installations.&#xA;# appname = imap&#xA;# domain = EXAMPLE.COM&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6345" LastEditorUserId="792" LastEditDate="2016-09-15T13:08:59.247" LastActivityDate="2016-09-15T13:08:59.247" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7854" PostTypeId="1" CreationDate="2016-09-15T02:04:24.183" Score="0" ViewCount="506" Body="&lt;p&gt;I tried reinstalling software center (after &lt;code&gt;apt update&lt;/code&gt;) and got errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice that some Loki Release repositories do not have a Release file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I upgraded Freya to Loki. I noticed numerous errors in the log about not having permissions, as well as the missing release files in Update Manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the syslog output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;File &quot;/usr/share/software-center/softwarecenter/db/__init__.py&quot;, line 6, in &amp;lt;module&amp;gt;&#xA;    from .debfile import DebFileApplication, DebFileOpenError&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/debfile.py&quot;, line 25, in &amp;lt;module&amp;gt;&#xA;    from softwarecenter.db.application import Application, AppDetails&#xA;  File &quot;/usr/share/software-center/softwarecenter/db/application.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;    import softwarecenter.distro&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 201, in &amp;lt;module&amp;gt;&#xA;    distro_instance = _get_distro()&#xA;  File &quot;/usr/share/software-center/softwarecenter/distro/__init__.py&quot;, line 176, in _get_distro&#xA;    module = __import__(distro_module_name, globals(), locals(), [], level)&#xA;ImportError: No module named &quot;elementary&quot;&#xA;&#xA;One: &quot;Input error: No module named &quot;elementary&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5832" LastEditorUserId="26" LastEditDate="2016-09-25T16:05:29.503" LastActivityDate="2017-10-15T12:10:47.940" Title="Software Center doesn't open (Loki)" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7856" PostTypeId="1" CreationDate="2016-09-15T03:45:37.180" Score="2" ViewCount="3669" Body="&lt;p&gt;I'm on a fresh install of Elementary OS Loki. Right after the install screen about installing third-party and background updates, I have this pop-up:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Force UEFI installation?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This machines's firmware has started the installer in UEFI mode but it looks like there may be existing operating systems already installed using &amp;quot;BIOS compatibility mode&amp;quot;. If you continue to install Debian in UEFI mode, it might be difficult to reboot the machine into any BIOS-mode operating systems later.&lt;/p&gt;&#xA;&lt;p&gt;If you wish to install in UEFI mode and don't care about keeping the ability to boot one of the existing systems, you have the option to force that here. If you wish to keep the option to boot an existing operating system, you should choose NOT to force UEFI installation here.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;In my case, the installed drives are blank, so I don't know why this message is being thrown, but is it smart to default new installs into UEFI mode? (Thus the only reason for desiring the old BIOS method would be compatibility with older, UEFI-incompatible operating systems?) Does this affect future installs of modern operating systems on this computer? Just wanted to confirm as I imagine many others will have the same questions.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-15T12:23:35.317" Title="Force UEFI installation?" Tags="|system-installation|release-loki|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7857" PostTypeId="1" CreationDate="2016-09-15T04:08:38.467" Score="1" ViewCount="216" Body="&lt;p&gt;I have multiple wired network profiles. How can i chose one in the loki gui? In Freya it was easily possible via the network panel, all profiles were listed and I simply clicked on it to activate. In Loki this is only possible with the wireless networks. Wired can only be switched on and off...&lt;/p&gt;&#xA;" OwnerUserId="6348" LastEditorUserId="6348" LastEditDate="2016-09-16T04:24:37.767" LastActivityDate="2017-07-11T10:24:18.487" Title="Loki chose wired network profile" Tags="|release-loki|networking|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7858" PostTypeId="2" ParentId="7761" CreationDate="2016-09-15T04:46:12.440" Score="0" Body="&lt;p&gt;It may be because the opensource drivers are still being loaded. I have noticed a bit more stability when I set &lt;code&gt;GRUB_CMDLINE_LINUX=&quot;nouveau.modeset=0 rd.driver.blacklist=nouveau rhgb&quot;&lt;/code&gt;&#xA;in &lt;code&gt;/etc/default/grub&lt;/code&gt;. Then run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo grub-mkconfig -o /boot/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and reboot. &lt;/p&gt;&#xA;" OwnerUserId="6333" LastActivityDate="2016-09-15T04:46:12.440" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7859" PostTypeId="1" CreationDate="2016-09-15T06:03:53.607" Score="5" ViewCount="1806" Body="&lt;p&gt;There is no option to add my school Microsoft Exchange account, How can I?&#xA;Thanks Ben &lt;/p&gt;&#xA;" OwnerUserId="6326" LastActivityDate="2018-01-19T11:31:16.193" Title="No Microsoft Exchange account option in Pantheon Mail" Tags="|pantheon-mail|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7860" PostTypeId="2" ParentId="7728" CreationDate="2016-09-15T06:35:47.673" Score="1" Body="&lt;p&gt;For the record: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &lt;strong&gt;nemo --no-desktop&lt;/strong&gt; seems to work on some configs, but not always. A bit of research and found that &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set org.nemo.desktop show-desktop-icons false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;did the trick for me (&lt;a href=&quot;https://faq.i3wm.org/question/3083/nemo-launches-a-desktop-window-linux-mint-16-cinnamon.1.html&quot; rel=&quot;nofollow&quot;&gt;link&lt;/a&gt;). As the problem is solved for me, I still wish to know if is possible to make nemo appear fullscreen. When installed on Ubuntu there is no issue with this window &gt;:( (it is maybe configured correctly to work on some distros?)&lt;/p&gt;&#xA;" OwnerUserId="6275" LastActivityDate="2016-09-15T06:35:47.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7862" PostTypeId="1" CreationDate="2016-09-15T07:27:16.870" Score="1" ViewCount="556" Body="&lt;p&gt;When selecting &quot;Erase disk and install elementary&quot; during the Loki install, what are the partition defaults used when formatting the drive?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-15T13:07:29.410" Title="&quot;Erase disk and install elementary&quot; partition defaults" Tags="|system-installation|release-loki|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7863" PostTypeId="2" ParentId="7687" CreationDate="2016-09-15T08:58:26.330" Score="2" Body="&lt;p&gt;I also have some issues with wireless on Loki. What I did:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the terminal/console and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill list all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should probably get a result like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: sony-wifi: Wireless LAN&#xA;        Soft blocked: yes&#xA;        Hard blocked: no&#xA;1: sony-bluetooth: Bluetooth&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;2: hci0: Bluetooth&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;3: phy0: Wireless LAN&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;4: nfc0: NFC&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So as you can see Wireless LAN has status: Soft blocked: yes&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now run in the terminal the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill unblock 0 &#xA;/* &#xA;* or another number which coresponde to your wi-fi (example: sony-wifi):&#xA;* rfkill unblock &amp;lt;number&amp;gt;&#xA;*/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;If the wireless is still off try to reboot your PC and check if wireless is on. If not try again the first steps.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6291" LastActivityDate="2016-09-15T08:58:26.330" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7865" PostTypeId="2" ParentId="7803" CreationDate="2016-09-15T09:33:49.573" Score="2" Body="&lt;p&gt;Primeiro, a password deve ser a de um utilizador root/administrador.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Segundo, a única forma de atualizar o Freya para o Loki é reinstalando o sistema. Alem disso, é impossível uma atualização completa para outra versão do elementaryOS ter só por volta de 300MB&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;First the password should be the one from a root/admin user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second the only way to upgrade from Freya to Loki is to reinstall. Besides, there is no way a complete elementary OS system upgrade only being around 300MB.&lt;/p&gt;&#xA;" OwnerUserId="668" LastEditorUserId="9" LastEditDate="2016-09-28T15:09:22.657" LastActivityDate="2016-09-28T15:09:22.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7866" PostTypeId="2" ParentId="7854" CreationDate="2016-09-15T10:01:35.490" Score="1" Body="&lt;p&gt;First of all the only way to upgrade Freya to Loki is to reinstall elementaryOS. So if you didn't fresh install Loki I suggest you to do so, to prevent errors like this one to happen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second, in Loki the Software Center was removed to give place to AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="668" LastActivityDate="2016-09-15T10:01:35.490" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7867" PostTypeId="2" ParentId="7793" CreationDate="2016-09-15T10:14:55.087" Score="1" Body="&lt;p&gt;Finally I manage to install Loki on my Macbook. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I redownload the iso, I reflash the USB on another USB with rufus, and finally it works. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the support. &lt;/p&gt;&#xA;" OwnerUserId="1224" LastActivityDate="2016-09-15T10:14:55.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7868" PostTypeId="1" CreationDate="2016-09-15T10:20:01.767" Score="0" ViewCount="1483" Body="&lt;p&gt;I just install Loki and i love it! It is a fast, lightweight and beautiful OS!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem has come when I'm trying to install my favourite apps, like Uberwriter and Google Chrome. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I knew about the app center, but i hope we can edit the software source or add repositorys. This is not the case... and the app center only show software that is already instaled on my system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for the support! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eduardo&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Thanks you all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know i can install Chromium but i want install Chrome. In the other hand, I'm trying Epiphany and i love it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have install the software that was linked below and everithing works fine. Sadly, the ppa of uberwriter is not waorking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, thanks!&lt;/p&gt;&#xA;" OwnerUserId="1224" LastEditorUserId="242" LastEditDate="2016-09-16T17:21:08.003" LastActivityDate="2016-09-16T17:21:08.003" Title="How can i install Apps from other sources?" Tags="|release-loki|applications|appcenter|" AnswerCount="2" CommentCount="0" ClosedDate="2016-10-09T00:22:45.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="7869" PostTypeId="2" ParentId="7868" CreationDate="2016-09-15T11:18:34.483" Score="2" Body="&lt;p&gt;sudo apt-get install software-properties-common - for adding repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install software-properties-gtk - GUI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install gdebi - for *.deb&lt;/p&gt;&#xA;" OwnerUserId="6194" LastActivityDate="2016-09-15T11:18:34.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7870" PostTypeId="2" ParentId="7856" CreationDate="2016-09-15T12:23:35.317" Score="1" Body="&lt;p&gt;I had this problem last night in my laptop and even tho I could solve it I don't have a technical explanation for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you force install in UEFI mode it won't boot. As simple as that. I was looking for the reason behind this but all I could find was related to dual boot with Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did was to force the installation (just click continue) and then get into my BIOS config and turn Legacy Mode on. After that your OS will boot without issues. If you don't turn Legacy Mode on the BIOS will throw a message at you saying that it couldn't find an OS.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-15T12:23:35.317" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7871" PostTypeId="2" ParentId="7808" CreationDate="2016-09-15T12:37:12.333" Score="1" Body="&lt;p&gt;The current version on actual elementary's release (0.4 Loki) is 3.15.0.2 so this might indicate that you are still running Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the issue here? Freya is based on Ubuntu 14.04 which was released more than two years ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution: Either upgrade to elementary OS 0.4 Loki (which has the AppCenter. A non terminal solution for app installing and the latest stable version available 3.15.0.2) or use the Terminal in Freya with the previous answer to install a later version of Filezilla from a PPA.&lt;/p&gt;&#xA;" OwnerUserId="2513" LastActivityDate="2016-09-15T12:37:12.333" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7872" PostTypeId="2" ParentId="7862" CreationDate="2016-09-15T13:07:29.410" Score="1" Body="&lt;p&gt;This is what &quot;Erase disk and install elementary&quot; have done in my virtual machine:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;One large primary ext4 fromated partition for / (boot and home altogether).&lt;/li&gt;&#xA;&lt;li&gt;One more extended partition with swap partition inside.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tdsLc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tdsLc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will be the same on real hardware but with larger partitions size.&lt;/p&gt;&#xA;" OwnerUserId="6222" LastActivityDate="2016-09-15T13:07:29.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7873" PostTypeId="2" ParentId="7765" CreationDate="2016-09-15T13:19:15.877" Score="2" Body="&lt;p&gt;I had to set the Boot flags to this:&#xA;devices.usb.mouse=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This fixed the problem for me.&lt;/p&gt;&#xA;" OwnerUserId="6356" LastActivityDate="2016-09-15T13:19:15.877" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7874" PostTypeId="2" ParentId="7868" CreationDate="2016-09-15T14:08:31.610" Score="0" Body="&lt;p&gt;If you want to install Chrome through the &lt;em&gt;App Center&lt;/em&gt; you can search for &quot;&lt;strong&gt;Chromium&lt;/strong&gt;&quot;. Chromium is the free (open) version of Chrome and supports the same things.&lt;/p&gt;&#xA;" OwnerUserId="6320" LastActivityDate="2016-09-15T14:08:31.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7879" PostTypeId="1" AcceptedAnswerId="7883" CreationDate="2016-09-15T15:29:18.020" Score="2" ViewCount="1745" Body="&lt;p&gt;I'm thinking of installing the latest elementary OS Loki on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm often in a dual monitor environment and I've grown accustomed to a keyboard shortcut in Ubuntu's Unity interface that allows  me to move an application from one monitor to the next using:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Right&lt;/kbd&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Left&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I configure this in Loki?&lt;/p&gt;&#xA;" OwnerUserId="2730" LastActivityDate="2016-09-15T18:08:45.027" Title="Keyboard shortcut to move window to different monitor" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7880" PostTypeId="1" AcceptedAnswerId="8017" CreationDate="2016-09-15T15:55:55.380" Score="1" ViewCount="451" Body="&lt;p&gt;I'm getting error in viber icon which is as shown. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone give me solution to this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lCmyE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lCmyE.jpg&quot; alt=&quot;viber broken icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6234" LastActivityDate="2016-09-20T01:26:43.210" Title="Viber Wingpanel icon broken" Tags="|release-loki|wingpanel|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-25T16:19:12.920" ContentLicense="CC BY-SA 3.0" />
  <row Id="7883" PostTypeId="2" ParentId="7879" CreationDate="2016-09-15T18:08:45.027" Score="1" Body="&lt;p&gt;I've installed elementary os loki and i've two monitors, a upper VGA monitor and down a notebook monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can moving the window with Shift+Super+Up and Shift+Super+Down, this works in default installation.&lt;/p&gt;&#xA;" OwnerUserId="6362" LastActivityDate="2016-09-15T18:08:45.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7884" PostTypeId="2" ParentId="7680" CreationDate="2016-09-15T18:51:33.400" Score="4" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1623793&quot; rel=&quot;nofollow noreferrer&quot;&gt;We narrowed the issue down&lt;/a&gt; to a single indicator, so the temporary fix is to remove it for now:&lt;/p&gt;&#xA;&lt;h3&gt;&lt;code&gt;sudo apt-get remove wingpanel-indicator-power&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;p&gt;I'll report back once the bug is resolved, but I otherwise recommend following &lt;a href=&quot;https://bugs.launchpad.net/wingpanel/+bug/1623793&quot; rel=&quot;nofollow noreferrer&quot;&gt;the report&lt;/a&gt; in case more feedback is needed.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-29T18:21:57.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7885" PostTypeId="1" CreationDate="2016-09-15T18:55:24.427" Score="4" ViewCount="1120" Body="&lt;p&gt;I have a Dell XPS L502X Nvidia and Intel video cards. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this a Nvidia/Nouveau issue but Slingshot menu always has a delay. Usually after the second try it works fairly fast again, but if I click it again after a few minutes the delay comes back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had Nvidia-361 installed the issue was there. I did a clean install of Loki but this time with Nouveau drivers and have the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone going through this, and if so is there a solution?&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="5726" LastEditDate="2016-10-30T14:14:06.067" LastActivityDate="2016-12-20T13:56:02.760" Title="Slingshot delay and other apps (Loki)" Tags="|release-loki|slingshot|nvidia|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7886" PostTypeId="1" AcceptedAnswerId="7890" CreationDate="2016-09-15T18:59:22.240" Score="8" ViewCount="21385" Body="&lt;p&gt;How can I restart my GUI (X window server) from command line without rebooting the system? Which process(es) do I need to kill and do they automatically restart?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2021-03-13T02:10:31.470" Title="Restart GUI without rebooting the system" Tags="|command-line|window-manager|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7887" PostTypeId="1" CreationDate="2016-09-15T19:58:52.423" Score="1" ViewCount="417" Body="&lt;p&gt;In Ubuntu you can disable it in the shortcut menu &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2013/07/use-ctrl-alt-del-task-manager-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2013/07/use-ctrl-alt-del-task-manager-ubuntu/&lt;/a&gt; &#xA;I have already tried editing the file located at&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/init/control-alt-delete.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and commenting it all out (it does absolutely nothing).&#xA;how can I stop it doing something when I press control alt delete.&#xA; i am using Freya 32 bit&#xA;and the output of &lt;code&gt;systemctl mask ctrl-alt-del.target&lt;/code&gt; is command not found&lt;/p&gt;&#xA;" OwnerUserId="5870" LastEditorUserId="5870" LastEditDate="2016-09-24T12:38:26.397" LastActivityDate="2016-10-24T13:07:43.973" Title="how can I disable control alt delete" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7888" PostTypeId="2" ParentId="3629" CreationDate="2016-09-15T19:59:24.463" Score="1" Body="&lt;p&gt;I had a similar issue with Elementary, and every other distro that I installed, on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It turned out to be an issue with the way my &lt;strong&gt;Nvidia GTS 250m&lt;/strong&gt; video card behaved with newer Nvidia proprietary drivers. It caused the keyboard lag you mentioned, but was a slight improvement over the frequent crashes that I experienced with the Nouveau driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution was to downgrade to the &lt;code&gt;nvidia-graphics-drivers-304&lt;/code&gt; proprietary drivers. It has it's own fantastic set of issues, but is stable and doesn't cause this bizarre text/visual issue, either.&lt;/p&gt;&#xA;" OwnerUserId="3678" LastActivityDate="2016-09-15T19:59:24.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7889" PostTypeId="1" AcceptedAnswerId="7946" CreationDate="2016-09-15T20:27:38.877" Score="18" ViewCount="9118" Body="&lt;p&gt;I'm using a Macintosh-style keyboard with Loki and would like my modifier keys to work as they do in OS X. That is, I would like:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;to copy, paste, new window with Super (Cmd) by default and not Ctrl&lt;/li&gt;&#xA;&lt;li&gt;option/alt and the arrow keys to jump whole words&lt;/li&gt;&#xA;&lt;li&gt;essentially the shortcuts as the OS X column says &lt;a href=&quot;https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts#Text_editing&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I thought that by choosing the &quot;English (Macintosh)&quot; keyboard layout that this would happen automatically—would that be a bug or a feature request? Is there any elementary OS-internal way to activate this? If not, what is the easiest external tool that already has a profile/config set up for this use case?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-16T21:54:49.287" LastActivityDate="2017-04-19T16:44:30.607" Title="Use macOS-style modifier keys" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7890" PostTypeId="2" ParentId="7886" CreationDate="2016-09-15T21:21:49.510" Score="7" Body="&lt;p&gt;All you need to do is restart LightDM as root, like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo restart lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2016-09-15T21:21:49.510" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="7892" PostTypeId="1" CreationDate="2016-09-16T00:48:03.513" Score="1" ViewCount="196" Body="&lt;p&gt;I have installed Loki. Everything was fine with setup and desktop bue when I tried to open Music app this appened&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JAqvh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JAqvh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To be honest this is not new. I experienced this in Freya but can't remember what I did&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remark that I have choosen to install propietary drivers in setup (while instaling OS ) so I dont know if updating video driver will fix it this time ( because I think this is what I did in Freya and worked) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it happens from time to time... in Music or video app and web browser&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anybody has experienced it and fix it I'll be happy to get some guidance because I dont know how to proceed now.&#xA;BTW my GPU is older ( nforce 630 chipset / 7025 geforce ) but it worked perfectly in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I love Elementary! I like to use it a lot. If guys at ElementaryOS dev. team manages to make DirectX integration on of these days :) this will be the last OS somebody could ever need&lt;/p&gt;&#xA;" OwnerUserId="6367" LastActivityDate="2016-09-16T19:22:50.097" Title="Screen distortion" Tags="|display|nvidia|video-player|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7896" PostTypeId="2" ParentId="7887" CreationDate="2016-09-16T04:23:10.960" Score="1" Body="&lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/q/763887/49899&quot;&gt;this&lt;/a&gt;, &lt;code&gt;control-alt-delete.conf&lt;/code&gt; is no longer used in Loki (which is based on Ubuntu Xenial).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They recommend:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemctl mask ctrl-alt-del.target&#xA;systemctl daemon-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-09-16T04:23:10.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7897" PostTypeId="1" CreationDate="2016-09-16T04:41:33.390" Score="9" ViewCount="5472" Body="&lt;p&gt;I am generally happy with my installation of Loki but I have ran into a few bugs. The most confusing one is that, sometimes (not always, although I cannot predict when it will and will not happen), after I login it will just show my background for several minutes before the panel and dock load, if at all. Other times, both will load quickly, within a few seconds. I have a similar issue with shutting down occasionally too. Sometimes I will shut down and it will take about 5 minutes just stuck on the black screen with the elementary logo. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used Freya and I did not run into anything like this, though there were some driver issues which, thankfully, don't appear to have persisted with Loki. I'm running Loki on a Thinkpad T420 with 2 hard drives, 1 250GB SSD and a 500GB HDD. I have 16GB of RAM and an i5 processor clocking at 2.5GHz, so I do not believe that it's a problem with the processor or RAM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if the problem could have been caused by my partitioning scheme, which is irregular: I have a 2Gb boot partition, a 22GB Root partition, and a usr and a usr/local partition taking up all of the space on my 250GB SSD. The 500GB HDD contains my Home Partition and 19GB of Swap. I partitioned my drives to try prioritise speed whilst having sufficient space for file storage. &lt;/p&gt;&#xA;" OwnerUserId="6371" LastActivityDate="2017-01-11T23:46:48.603" Title="Significant lag loading panel and dock after login (Loki)" Tags="|wingpanel|slingshot|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2018-03-11T02:02:26.453" ContentLicense="CC BY-SA 3.0" />
  <row Id="7899" PostTypeId="1" CreationDate="2016-09-16T06:00:58.357" Score="1" ViewCount="217" Body="&lt;p&gt;As stated in the subject line I selected a different background picture but nothing updates even after closing system settings?&lt;/p&gt;&#xA;" OwnerUserId="6373" LastActivityDate="2016-09-17T02:53:20.017" Title="Changing desktop background in system settings does not update the background" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7900" PostTypeId="1" AcceptedAnswerId="7928" CreationDate="2016-09-16T06:46:25.623" Score="0" ViewCount="669" Body="&lt;p&gt;I've never installed an OS on my own before, so I'm hesitant to erase Windows completely. I've read a couple of guides on how to partition and swap during installation but I'm not confident that I could do it without incident. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would my easiest option be to erase Windows, considering my limited knowledge? What else could I do?&lt;/p&gt;&#xA;" OwnerUserId="6376" LastActivityDate="2016-09-16T17:54:42.970" Title="Tried to dual install Loki with Windows 7, but it says no other OS detected. Any advice?" Tags="|system-installation|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7903" PostTypeId="1" CreationDate="2016-09-16T09:20:04.917" Score="0" ViewCount="75" Body="&lt;p&gt;I´m new to Elementary - I use Freya at the moment.&#xA;Now I´m testing Loki virtualised.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Loki I can´t install bitcoin-qt and keepassx from the ressources.&#xA;Adding the repositories also won´t work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do I have to do? If this works, I will upgrade to Loki this afternoon...&lt;/p&gt;&#xA;" OwnerUserId="6317" LastActivityDate="2016-09-19T05:56:30.177" Title="Bitcoin, Keepassx from repositories?" Tags="|repositories|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7905" PostTypeId="2" ParentId="7900" CreationDate="2016-09-16T09:29:17.693" Score="0" Body="&lt;p&gt;I'm assuming your laptop has only one drive, and not a dual-drive setup (such as HDD+SSD), and that one drive only has one partition. Note that if you have multiple partitions on the drive, this may fail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, some of the block bits on the partition can be placed anywhere inside the data drive. This means that there is a limit to how much you can 'shrink' your Windows 7 installation and install Loki alongside.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow these steps.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot up your Windows 7 installation.&lt;/li&gt;&#xA;&lt;li&gt;From the Start menu, type Disk Management.&lt;/li&gt;&#xA;&lt;li&gt;In disk management, select the Windows 7 partition. This will usually be the biggest partition residing on the drive.&lt;/li&gt;&#xA;&lt;li&gt;Right click the partition and select Shrink Partition.&lt;/li&gt;&#xA;&lt;li&gt;DM will automatically calculate how much storage space can be spared for the Loki installation. I recommend a base minimum of 10GB, although it can be much more less. (I think the very minimum is 7GB, but that only leaves a few GB for you to store your files.)&lt;/li&gt;&#xA;&lt;li&gt;Shrink the drive. DON'T SET UP PARTITIONS FOR LOKI JUST YET! We're going to do that directly in the installer.&lt;/li&gt;&#xA;&lt;li&gt;After you're done, boot up to the USB, select Something else, and continue.&lt;/li&gt;&#xA;&lt;li&gt;Let's say the amount you can use is in total, 20GB. Now you need to know how much RAM you have, and in this case we're going to assume 8GB. Halve that, and you get 4GB. Now, you need to subtract this from the total.&#xA;So 20GB - 4GB = 16GB.&lt;/li&gt;&#xA;&lt;li&gt;Make a drive in 16GB and set it as root(/) of the install. This is where all your OS files and your files would go.&lt;/li&gt;&#xA;&lt;li&gt;Last step! With the last 4GB, make a swap space, in case you use more than your RAM.&lt;/li&gt;&#xA;&lt;li&gt;You're done! Go ahead with your installation!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;However - this may mean that you will be unable to boot to your Windows 7 without configuring the grub properly. Grub may detect your Windows installation better than the installer. This doesn't mean you'll lose any data, of course, it just means that you couldn't boot back to Windows 7 without proper configuration of the grub bootloader.&lt;/p&gt;&#xA;" OwnerUserId="5738" LastActivityDate="2016-09-16T09:29:17.693" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7906" PostTypeId="1" AcceptedAnswerId="8087" CreationDate="2016-09-16T10:01:08.130" Score="3" ViewCount="5730" Body="&lt;p&gt;I have a loud fan and don't like when CPU goes hot for no reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I start Loki 25% of CPU is taken by &lt;code&gt;packagekitd&lt;/code&gt; which is enough to make the fan too loud. Anyway, I expect that to check for updates and go off quickly, but instead it keeps running. I can kill it manually but that's not the way to go.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After killing it and searching manually for updates (AppCenter/Updates), &lt;code&gt;packagekitd&lt;/code&gt; starts again, and then it doesn't stress the CPU at all and also closes very quickly after having searched for updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What to do?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-09-16T10:59:06.543" LastActivityDate="2016-09-21T23:30:01.317" Title="packagekitd takes a lot of CPU when starting Loki" Tags="|package-management|cpu|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-25T16:20:10.727" ContentLicense="CC BY-SA 3.0" />
  <row Id="7907" PostTypeId="1" CreationDate="2016-09-16T10:06:57.693" Score="1" ViewCount="474" Body="&lt;p&gt;this is my first time using linux. I bought a used lenovo laptop, and since I only need it for my studies I figured Elementary OS would be faster and prettier. It is both of these things, but I did run in some problems a quick google search couldn't resolve, and I'd appreciate the help &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of, the appcenter. Yes I know there are already some solutions online but none worked for me. Things I tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt-get --purge remove appcenter&#xA;reboot&#xA;sudo apt install appcenter&#xA;sudo apt update -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the end I just searched the net for names of the apps I needed and installed the using apt install. however some did install but didn't show up in the Applications on the top left corner, even though the installation was succesfull, with a progress bar and everything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that I downloaded the files from the respective websites, but I have no clue how to install *.tar.xz and *.tar.bz files, I did download Gdebi and Synapse, yet no progress.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The programs I still can't install are tor browser, skype and FANcon. I don't really need the appcenter but I'd like to know how to install the last two programs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&#xA;Wolf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I installes the gnome-software appcenter, this one works fine. Would've been nice to get the native one working, oh well&lt;/p&gt;&#xA;" OwnerUserId="6381" LastEditorUserId="26" LastEditDate="2016-09-20T16:34:30.930" LastActivityDate="2016-09-21T09:38:12.733" Title="Newb problems, yet another appcenter thread" Tags="|applications|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7908" PostTypeId="1" AcceptedAnswerId="8133" CreationDate="2016-09-16T10:54:48.307" Score="0" ViewCount="4008" Body="&lt;p&gt;I just installed Elementary OS Loki on my laptop. I love the OS, however my battery drains very fast. On a full charge, I only have have an hour of 3 to go. My previous installation of Elementary (Freya) could go for an hour of 5. How can I increase battery life?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed already the suggestions here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1090/how-to-optimize-elementary-os-for-maximal-battery-life-time-on-laptops&quot;&gt;How to optimize elementary OS for maximal battery life time on laptops?&lt;/a&gt;, however they don't seem to have any effect on Loki.&#xA;inxi -G reports my Intel HD graphics are in use (and not my nvidia GPU).&#xA;Powertop reports the following: &lt;a href=&quot;https://i.stack.imgur.com/IVm2i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IVm2i.png&quot; alt=&quot;Powertop output&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help to get my battery life back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My specs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i5-6440HQ CPU&lt;/li&gt;&#xA;&lt;li&gt;SSD with HDD (turned off almost all the time)&lt;/li&gt;&#xA;&lt;li&gt;nVidia GTX 960M&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="5045" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-23T17:29:11.347" Title="Battery life Loki" Tags="|release-loki|battery|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-23T20:30:00.133" ContentLicense="CC BY-SA 3.0" />
  <row Id="7909" PostTypeId="1" AcceptedAnswerId="8034" CreationDate="2016-09-16T10:57:39.730" Score="6" ViewCount="3526" Body="&lt;p&gt;I used &lt;code&gt;elementary os freya&lt;/code&gt; and did a fresh install to &lt;code&gt;elementary os loki&lt;/code&gt; yesterday night. Now I'm unable to use &lt;code&gt;USB Modems&lt;/code&gt; ( &lt;code&gt;usb dongles&lt;/code&gt;) for connecting to the Internet. In &lt;code&gt;Freya&lt;/code&gt; there was no trouble in connecting from &lt;code&gt;usb modems&lt;/code&gt;. But in &lt;code&gt;loki&lt;/code&gt; when &lt;code&gt;USB modem&lt;/code&gt; was plugged, &lt;code&gt;create new connection&lt;/code&gt; does not appear in the network menu, (the modem shows signals are availables through the LED bulb) I was able to create a new connection from &lt;code&gt;edit connections&lt;/code&gt; as in the below image.&lt;a href=&quot;https://i.stack.imgur.com/TlSms.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TlSms.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; As depicted in the image above, mobile broadband is not shown under the Devices. So how to connect to Internet using &lt;code&gt;usb modems&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="3955" LastActivityDate="2017-06-28T08:01:47.700" Title="Cannot connect to internet from USB dongles in elementary os loki" Tags="|release-loki|networking|internet|usb|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7910" PostTypeId="2" ParentId="7907" CreationDate="2016-09-16T11:07:22.813" Score="2" Body="&lt;p&gt;Not all apps for Linux that exist out there are in Elementary's AppCenter. Only a subset of those hand-picked by the Elementary team.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said most of the apps you see that are packaged for Ubuntu 14.04+ will work on Elementary. So you want to snatch the .deb file and then on the terminal do (example for skype alpha):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install path/to/skypeforlinux-64-alpha.deb&#xA;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the future you might want to use ppa's instead, just so you always have the latest stable release installed. But that's a topic for another lesson, further down the road. ;)&lt;/p&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2016-09-16T11:07:22.813" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7912" PostTypeId="1" CreationDate="2016-09-16T11:52:35.703" Score="1" ViewCount="23" Body="&lt;p&gt;Yellow-blue halo around some text in Files, Mail, Music, etc. and the text on a few web pages (which is the most annoying) with Epiphany, but not with Firefox. It's an issue in Loki, not in Freya.&lt;a href=&quot;https://i.stack.imgur.com/UvDTn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UvDTn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-09-16T11:52:35.703" Title="Halo around text" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ClosedDate="2016-11-23T11:32:07.787" ContentLicense="CC BY-SA 3.0" />
  <row Id="7913" PostTypeId="1" CreationDate="2016-09-16T11:58:07.550" Score="0" ViewCount="550" Body="&lt;p&gt;&lt;code&gt;apturl&lt;/code&gt; is installed.&lt;/p&gt;&#xA;&lt;p&gt;When clicking such a link (like on &lt;a href=&quot;https://apps.ubuntu.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://apps.ubuntu.com&lt;/a&gt;) in Epiphany and Firefox nothing happens.&lt;/p&gt;&#xA;&lt;p&gt;Even tried it Palemoon, with the same result. In both Firefox and Palemoon I can see apt associated with aprurl:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gQoVW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gQoVW.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WV8cw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WV8cw.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When clicking it in Chrome or Chromium this happens:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IbFmy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IbFmy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But when trying to set &lt;code&gt;apturl&lt;/code&gt; as default aplication following &lt;a href=&quot;https://askubuntu.com/a/172600/47206&quot;&gt;this answer&lt;/a&gt;, there is no &lt;code&gt;apt&lt;/code&gt; entry in &lt;code&gt;gconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;The command &lt;code&gt;xdg-mime default apturl.desktop x-scheme-handler/apt&lt;/code&gt; gives  no errors, and  apturl seems the default application for apt links, because:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~$ xdg-mime query default x-scheme-handler/apt&#xA;apturl.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But then the same happens.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What I'm asking is:&lt;/strong&gt; a way to make apturl open those links it is supposed open (like it does in my other Linux installations) or a reason why it doesn't work in elementary Loki (while it worked in Freya).&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-28T11:38:07.120" Title="apturl doesn't work in Loki" Tags="|release-loki|apt|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7914" PostTypeId="2" ParentId="7913" CreationDate="2016-09-16T12:37:45.953" Score="1" Body="&lt;p&gt;In my view, the &lt;code&gt;apturl&lt;/code&gt; should is interconnected with AppCenter, but the store does not support, I hope you soon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use Gnome Software is the new store &lt;code&gt;Ubuntu 16.04&lt;/code&gt;, with it is possible to use &lt;code&gt;apturl&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7542/how-can-i-install-deb-files-in-loki/7664#7664&quot;&gt;See how to install&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6175" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-16T12:37:45.953" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7915" PostTypeId="1" CreationDate="2016-09-16T12:48:16.700" Score="1" ViewCount="1504" Body="&lt;p&gt;I have a work laptop that had an encrypted partition with Windows 7 and I wanted to dual boot it with Loki. I installed Loki, but during the installation process it told me that I couldn't install it with UEFI without damaging the MBR or something or another, I can't recall. So I went back and partitioned it manually by shrinking the windows partition (within windows) than restarted the installer and made a swap, boot and home partition for Loki and installed Loki. The installation went fine and Loki runs perfectly, but when I boot the computer, I can't choose between Loki and Windows, so I can't boot into Windows anymore, can anyone help me with this?&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2024-03-20T05:05:50.660" Title="UEFI dual boot won't dual boot" Tags="|release-loki|dual-boot|uefi|microsoft-windows|encryption|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7916" PostTypeId="1" AcceptedAnswerId="7925" CreationDate="2016-09-16T15:43:18.370" Score="3" ViewCount="4148" Body="&lt;p&gt;I try to install it with Linuxbrew. Then, it stuck at &lt;code&gt;make install&lt;/code&gt;. I try to leave it about 20 minutes and still no change. Am I being impatient?&lt;/p&gt;&#xA;" OwnerUserId="6388" LastActivityDate="2017-11-02T21:13:45.987" Title="is node.js compatible with elementary loki?" Tags="|release-loki|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7917" PostTypeId="1" CreationDate="2016-09-16T15:43:20.750" Score="7" ViewCount="326" Body="&lt;p&gt;I'm running the latest version of chrome and every time I reboot elementary, I'm having to re-login to Chrome (via the settings menu).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RG3GT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RG3GT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other websites I've signed into, like Fb, SO etc also keep logging me out. Cookies are enabled in Chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does this keep happening and how can I avoid it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; thought the problem was related to autologin and the key ring not getting unlocked in time but this is not the issue. Sometimes the issue happens even when the computer is locked/idle for a while and I come back to Chrome. This is the message displayed in Chrome. My account is fine, and this never happens on Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 2:&lt;/strong&gt; The issue has been &lt;a href=&quot;https://productforums.google.com/forum/#!topic/chrome/7BF8U4o_u_o;context-place=forum/chrome/categories&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported here&lt;/a&gt;. The reply by Igor Bukin  seems to be a possible fix for this issue, but cannot be done on elementary as I'm unable to add a Google account in &lt;code&gt;Settings&amp;gt;Online Accounts&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5XeJO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5XeJO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit 3:&lt;/strong&gt; This issue has cleared itself over time, without needing a particular fix. If the issue resurfaces I will be updating this question.&lt;/p&gt;&#xA;" OwnerUserId="5520" LastEditorUserId="5520" LastEditDate="2016-12-12T17:32:22.893" LastActivityDate="2016-12-12T17:32:22.893" Title="Chrome keeps forgetting my sessions on every reboot on Loki" Tags="|release-loki|google-chrome|" AnswerCount="0" CommentCount="7" ClosedDate="2017-02-22T18:40:54.813" ContentLicense="CC BY-SA 3.0" />
  <row Id="7918" PostTypeId="1" CreationDate="2016-09-16T16:06:22.313" Score="0" ViewCount="798" Body="&lt;p&gt;I have installed my Canon MF8280Cw printer on Elementary OS with the UFRII-driver (the same it worked in Linux Mint).&#xA;The problem is, that the job is sent, but the printer makes a beep and then nothing happens.&#xA;Do anybody have the same problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="6317" LastActivityDate="2016-09-21T18:53:14.703" Title="Print on Elementary OS Loki" Tags="|repositories|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7920" PostTypeId="1" CreationDate="2016-09-16T16:31:33.520" Score="-1" ViewCount="849" Body="&lt;p&gt;I guess the elementary-tweaks project is shut down and won't be getting any updates. Is there any alternative to make customizations on various fronts to the brand new elementary OS Loki?&lt;/p&gt;&#xA;" OwnerUserId="4973" LastEditorUserId="308" LastEditDate="2019-12-06T07:17:35.920" LastActivityDate="2019-12-06T07:18:38.133" Title="How do I make customizations to elementary OS Loki?" Tags="|themes|tweak-tool|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7921" PostTypeId="1" AcceptedAnswerId="7922" CreationDate="2016-09-16T16:38:48.047" Score="1" ViewCount="690" Body="&lt;p&gt;I want to keep my Spotify notifications but I don't want them to make a sound each time they appear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know there is an option in the Spotify settings for deactivating them altogether, and I don't see an option to control Spotify notifications within the Notifications preference pane.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-16T16:38:48.047" Title="Prevent Spotify notification from making sound" Tags="|notifications|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7922" PostTypeId="2" ParentId="7921" CreationDate="2016-09-16T16:38:48.047" Score="2" Body="&lt;p&gt;Spotify doesn't register its notifications with the system &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1593851&quot; rel=&quot;nofollow noreferrer&quot;&gt;properly&lt;/a&gt; and since its development future &lt;a href=&quot;http://www.omgubuntu.co.uk/2016/03/spotify-linux-no-development&quot; rel=&quot;nofollow noreferrer&quot;&gt;appears spotty&lt;/a&gt;, my solution for now is to &lt;strong&gt;turn off sounds in the &quot;Other&quot; notifications option&lt;/strong&gt;. This deactivates sounds for all unregistered applications, but such is the way of things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rb5rA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rb5rA.png&quot; alt=&quot;Notifications&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-16T16:38:48.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7924" PostTypeId="1" CreationDate="2016-09-16T17:23:25.900" Score="8" ViewCount="702" Body="&lt;p&gt;I have the 'allow advertisements' checkbox unchecked in Epiphany 3.18.5. However, ads are not removed from web content.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-- EDIT --&lt;br&gt;&#xA;For example, coming from Chrome with the AdBlock+ extension, the ads at the top of the Youtube homepage aren't blocked, nor are the ads in videos themselves. Neither are ads from AdChoices, for example the one on the right of &lt;a href=&quot;http://linux.die.net/man/2/sbrk&quot;&gt;this page&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5083" LastEditorUserId="5083" LastEditDate="2016-09-17T13:45:37.267" LastActivityDate="2017-02-15T18:20:27.763" Title="Epiphany not blocking adverts" Tags="|release-loki|epiphany|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7925" PostTypeId="2" ParentId="7916" CreationDate="2016-09-16T17:24:12.177" Score="1" Body="&lt;p&gt;I have no troubles installing NodeJS with Linuxbrew, I suppose you install Linuxbrew following the instructions in the &lt;a href=&quot;http://linuxbrew.sh/&quot; rel=&quot;nofollow noreferrer&quot;&gt;offical page&lt;/a&gt;. And later just install with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;brew install node&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In my case, installation took 19 minutes 26 seconds but everything was fine.&lt;/p&gt;&#xA;" OwnerUserId="6249" LastEditorUserId="12361" LastEditDate="2017-11-02T21:13:45.987" LastActivityDate="2017-11-02T21:13:45.987" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7927" PostTypeId="2" ParentId="7916" CreationDate="2016-09-16T17:48:44.467" Score="1" Body="&lt;p&gt;I installed with with &lt;code&gt;apt install&lt;/code&gt; just fine and can run servers and everything. I don't have experience with linuxbrew though.&lt;/p&gt;&#xA;" OwnerUserId="4961" LastActivityDate="2016-09-16T17:48:44.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7928" PostTypeId="2" ParentId="7900" CreationDate="2016-09-16T17:54:42.970" Score="0" Body="&lt;p&gt;I followed a guide on partitioning and it's very easy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You don't have to erase windows. You should get the installation media ready, boot to BIOS and choose to boot from your CD or USB, and when you're going through the setup process it will ask you if you'd like to completely write over your windows install. I think at that point you click 'Go Back' or something like that, and then it brings you to a screen where you can partition the drives. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You reduce your main partition by whatever amount you want for Elementary, then you make a Swap partition that is supposed to be around the size of your RAM I think, and then you make a &quot;/&quot; root partition with the remaining space&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's very similar to this advice for ubuntu: &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation?answertab=votes#tab-top&quot;&gt;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation?answertab=votes#tab-top&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't be scared, you won't ruin anything. &lt;/p&gt;&#xA;" OwnerUserId="4961" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-09-16T17:54:42.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7929" PostTypeId="2" ParentId="7920" CreationDate="2016-09-16T18:56:42.567" Score="0" Body="&lt;p&gt;You can still install elementary-tweaks for Loki trough philip.scott's PPA: &lt;a href=&quot;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="668" LastEditorUserId="308" LastEditDate="2019-12-06T07:18:38.133" LastActivityDate="2019-12-06T07:18:38.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7930" PostTypeId="2" ParentId="7916" CreationDate="2016-09-16T18:58:05.613" Score="5" Body="&lt;p&gt;You can install NodeJS this way :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -&#xA;sudo apt install nodejs&#xA;sudo apt install build-essential&#xA;sudo node -v &amp;amp;&amp;amp; npm -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6392" LastEditorUserId="26" LastEditDate="2016-09-25T16:29:22.957" LastActivityDate="2016-09-25T16:29:22.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7931" PostTypeId="1" CreationDate="2016-09-16T19:06:09.920" Score="1" ViewCount="258" Body="&lt;p&gt;When I plug in my External WD hard drive, open Pantheon and click on the &quot;My Passport&quot; drive on the left side under devices, instead of seeing the files on the right side pane, I see this (screenshot)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GQtpW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GQtpW.png&quot; alt=&quot;Unable to show Folder. The server for this folder could not be located.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;App Versions:&#xA;* Pantheon Files v0.3.0.2&#xA;* elementary OS 0.4 Loki (64-bit)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are the relevant Syslog messages: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[12957.767064] usb 2-1.4: new high-speed USB device number 4 using ehci-pci&#xA;[12957.922325] usb 2-1.4: New USB device found, idVendor=1058, idProduct=259d&#xA;[12957.922335] usb 2-1.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1&#xA;[12957.922340] usb 2-1.4: Product: My Passport 259D&#xA;[12957.922345] usb 2-1.4: Manufacturer: Western Digital&#xA;[12957.922349] usb 2-1.4: SerialNumber: 575831314134364854353953&#xA;[12958.013968] usb-storage 2-1.4:1.0: USB Mass Storage device detected&#xA;[12958.014112] scsi host6: usb-storage 2-1.4:1.0&#xA;[12958.014256] usbcore: registered new interface driver usb-storage&#xA;[12958.038309] usbcore: registered new interface driver uas&#xA;[12959.013019] scsi 6:0:0:0: Direct-Access     WD       My Passport 259D 1005 PQ: 0 ANSI: 6&#xA;[12959.014112] scsi 6:0:0:1: Enclosure         WD       SES Device       1005 PQ: 0 ANSI: 6&#xA;[12959.019253] sd 6:0:0:0: Attached scsi generic sg2 type 0&#xA;[12959.019883] scsi 6:0:0:1: Attached scsi generic sg3 type 13&#xA;[12959.022984] sd 6:0:0:0: [sdb] Spinning up disk...&#xA;[12959.063784] scsi 6:0:0:1: Wrong diagnostic page; asked for 1 got 0&#xA;[12959.063793] scsi 6:0:0:1: Failed to get diagnostic page 0xffffffea&#xA;[12959.063797] scsi 6:0:0:1: Failed to bind enclosure -19&#xA;[12959.063829] ses 6:0:0:1: Attached Enclosure device&#xA;[12960.026951] .....ready&#xA;[12964.055981] sd 6:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)&#xA;[12964.057461] sd 6:0:0:0: [sdb] Write Protect is off&#xA;[12964.057469] sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08&#xA;[12964.058794] sd 6:0:0:0: [sdb] No Caching mode page found&#xA;[12964.058806] sd 6:0:0:0: [sdb] Assuming drive cache: write through&#xA;[12964.245771] Alternate GPT is invalid, using primary GPT.&#xA;[12964.245818]  sdb: sdb1&#xA;[12964.252442] sd 6:0:0:0: [sdb] Attached SCSI disk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6391" LastActivityDate="2016-09-16T19:06:09.920" Title="Unable to Browse Files on External WD Harddrive" Tags="|release-loki|pantheon-files|hardware|usb-drive|pantheon|" AnswerCount="0" CommentCount="5" ClosedDate="2016-10-09T00:26:02.277" ContentLicense="CC BY-SA 3.0" />
  <row Id="7932" PostTypeId="1" AcceptedAnswerId="7960" CreationDate="2016-09-16T19:14:25.780" Score="1" ViewCount="3474" Body="&lt;p&gt;I'm having problems installing .deb packages. I tried to install vscode and chrome and failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error suggests to enter a .deb package, when installing with terminal need run &lt;code&gt;sudo dpkg -i *.deb&lt;/code&gt; and &lt;code&gt;sudo apt-get install -f&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6393" LastEditorUserId="242" LastEditDate="2016-09-17T22:33:01.420" LastActivityDate="2021-08-10T19:54:34.570" Title="Problems to install .deb package" Tags="|release-loki|software-installation|" AnswerCount="2" CommentCount="3" ClosedDate="2016-09-19T00:12:47.577" ContentLicense="CC BY-SA 3.0" />
  <row Id="7934" PostTypeId="1" CreationDate="2016-09-16T22:21:31.260" Score="10" ViewCount="83098" Body="&lt;p&gt;I'm new to Linux and am trying out Elementary. I need to install Google Chrome and do not see it in the app store, but I downloaded it directly from the Google site. However, I don't understand what I need to do with the file that downloaded. It contains some .tar.gz files and a binary file, how do I install an app from that? &lt;/p&gt;&#xA;" OwnerUserId="6397" LastActivityDate="2017-06-18T09:45:29.703" Title="How to install Google Chrome?" Tags="|google-chrome|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7936" PostTypeId="1" CreationDate="2016-09-16T23:05:34.217" Score="3" ViewCount="257" Body="&lt;p&gt;I can run Opera in my user account but It doesn't work in the guest account. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I first downloaded the .deb package from:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.opera.com/es/computer/linux&quot; rel=&quot;nofollow&quot;&gt;http://www.opera.com/es/computer/linux&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed with apt:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install opera-stable_40.0.2308.62_i386.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Worked well but when someone tried to use the &quot;guest account&quot; it wasn't possible to run Opera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They could see the icon but nothing happened when clicked on it. &#xA;Trying to run Opera from terminal in &quot;guest account&quot; gives errors and produce &quot;core&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unistalled Opera to try another method of installation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge opera-stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried to install Opera with the method of adding the ppa:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository 'deb https://deb.opera.com/opera-stable/ stable non-free'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget -qO- https://deb.opera.com/archive.key | sudo apt-key add -&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install opera-stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It hasn't solved the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Guests have still Epiphany and Firefox... (No Opera for them)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-09-25T17:33:23.973" LastActivityDate="2019-04-30T20:34:03.953" Title="Opera doesn't open in guest account" Tags="|release-loki|applications|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7937" PostTypeId="2" ParentId="7934" CreationDate="2016-09-16T23:08:22.013" Score="2" Body="&lt;p&gt;I think you can use a search engine like google to anwser that question. Chromium is like the Open-Source version of Google Chrome, and it's works equal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install chromium-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you really want to install Google Chrome, in the &lt;a href=&quot;https://www.google.es/chrome/&quot; rel=&quot;nofollow&quot;&gt;Google Chrome's official page&lt;/a&gt; you can to download the Ubuntu's .deb file for 64 bits, and install via console with apt. But you can to download and install with the next command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -O https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb &amp;amp;&amp;amp; sudo apt install ./google-chrome-stable_current_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6249" LastActivityDate="2016-09-16T23:08:22.013" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7938" PostTypeId="2" ParentId="7816" CreationDate="2016-09-17T00:38:28.393" Score="1" Body="&lt;p&gt;AFAIK this is about the kernel issues. In some devices (Chromebooks), a newer kernel will solve the problem, but others no.&#xA;I guess you are using BOOT_STUB or full rom firmware. Changing it to RW_LEGACY firmware may help.&#xA;Here are some links about this problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://m.reddit.com/r/GalliumOS/comments/4ux2qc/suspend_not_working_on_swanky/&quot; rel=&quot;nofollow&quot;&gt;https://m.reddit.com/r/GalliumOS/comments/4ux2qc/suspend_not_working_on_swanky/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/GalliumOS/galliumos-distro/issues/268&quot; rel=&quot;nofollow&quot;&gt;https://github.com/GalliumOS/galliumos-distro/issues/268&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6400" LastActivityDate="2016-09-17T00:38:28.393" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7939" PostTypeId="1" CreationDate="2016-09-17T01:55:54.223" Score="3" ViewCount="2571" Body="&lt;p&gt;I like vertical two-finger scrolling and enabled it. However, I keep accidentally swiping left and right with two fingers and going back and forward in Chrome, as well as doing weird stuff in other apps. Is there a way to keep vertical two-finger scrolling, but disable to horizontal scrolling?&lt;/p&gt;&#xA;" OwnerUserId="5208" LastActivityDate="2016-10-20T10:28:40.267" Title="Way to enable vertical two-finger scrolling, but not horizontal?" Tags="|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7940" PostTypeId="2" ParentId="7934" CreationDate="2016-09-17T02:11:51.840" Score="0" Body="&lt;p&gt;cd to the directory the .deb is in.&lt;br/&gt;&#xA;&lt;code&gt;sudo dpkg -i {installer.deb}&lt;/code&gt;&lt;br/&gt;&#xA;It will probably fail because of missing dependencies then do:&lt;br/&gt;&#xA;&lt;code&gt;sudo apt -f install&lt;/code&gt;&lt;br/&gt;&#xA;To install the missing dependencies. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck. &lt;/p&gt;&#xA;" OwnerUserId="6401" LastEditorUserId="6401" LastEditDate="2016-09-17T02:17:26.613" LastActivityDate="2016-09-17T02:17:26.613" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7941" PostTypeId="2" ParentId="7899" CreationDate="2016-09-17T02:53:20.017" Score="1" Body="&lt;p&gt;Check what is really written to &lt;code&gt;org.gnome.desktop.background&lt;/code&gt;.  I see the effect of changing wallpaper immediately.  But if I change the background to solid colour, it gets always black:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tp6hv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tp6hv.png&quot; alt=&quot;grey background chosen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found, that it writes the colour in &lt;code&gt;rgb(...)&lt;/code&gt; format to gnome settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bJebW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bJebW.png&quot; alt=&quot;wrong colour format&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I fix the value format in dconf-editor to &lt;code&gt;#...&lt;/code&gt;, I see the right background colour.  Setting &lt;code&gt;primary-color&lt;/code&gt; to &lt;code&gt;#d0d0d0&lt;/code&gt; helped in my case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you cannot select a picture, you can have a look if the actually written path is correct.&lt;/p&gt;&#xA;" OwnerUserId="6396" LastActivityDate="2016-09-17T02:53:20.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7943" PostTypeId="2" ParentId="2383" CreationDate="2016-09-17T03:29:49.740" Score="1" Body="&lt;p&gt;With the Cubi (and presumably other computers) there’s a Headphone icon followed by a slash / followed by a microphone icon.  Turns out this slash means “either or.”  In other words, you can use the headphones or the microphone, but not both.  Who knows why they do this.  However, the good news is that a “fix” will cost you less than $15.  You’ll need two things:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;3.5MM Female to 2 Male Headphone Mic Audio Y Splitter Flat Cable such as&#xA;&lt;a href=&quot;https://i.stack.imgur.com/5GAli.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5GAli.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;USB External Sound Adapter such as&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ZbPNr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZbPNr.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="366" LastActivityDate="2016-09-17T03:29:49.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7945" PostTypeId="2" ParentId="7880" CreationDate="2016-09-17T06:22:02.557" Score="0" Body="&lt;p&gt;Try to add to your environment following parameters:&#xA;XDG_CURRENT_DESKTOP=Unity&#xA;QT_STYLE_OVERRIDE=&quot;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can put it into your .profile file&lt;/p&gt;&#xA;" OwnerUserId="359" LastActivityDate="2016-09-17T06:22:02.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7946" PostTypeId="2" ParentId="7889" CreationDate="2016-09-17T06:49:42.957" Score="7" Body="&lt;p&gt;So I futzed around with this for a day (gsettings, built-in shortcuts, xkb, xmodmap) and no turnkey solution is forthcoming, though I &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1624189&quot; rel=&quot;noreferrer&quot;&gt;filed a feature request&lt;/a&gt; that might lead somewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the meantime and short of rewriting the actual system shortcuts (which is the longterm solution), I'll try to list what I felt was the best way to approximate the OS X experience in elementary OS. Remember the idea is not to simply make the Super/Command key a clone of the Control key (the Control key has its own specific uses in Terminal and elsewhere). &lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Repurpose existing shortcuts&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;When a shortcut already is in use but just needs to be mapped to the familiar shortcut, AutoKey is the fastest solution for now. I suggest the following remaps (install directions follow the list):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;ctrl&amp;gt;+C  ⌘+C     copy&#xA;&amp;lt;ctrl&amp;gt;+V  ⌘+V     paste&#xA;&amp;lt;ctrl&amp;gt;+N  ⌘+N     new window&#xA;&amp;lt;ctrl&amp;gt;+T  ⌘+T     new tab&#xA;&amp;lt;ctrl&amp;gt;+W  ⌘+W     close window&#xA;&#xA;&amp;lt;ctrl&amp;gt;+Z  ⌘+Z     undo&#xA;&amp;lt;ctrl&amp;gt;+F  ⌘+F     find&#xA;&amp;lt;ctrl&amp;gt;+A  ⌘+A     select all text&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;skip between... (for each, remember to add both left/right up/down pairs and to add highlight versions by adding &lt;code&gt;&amp;lt;shift&amp;gt;&lt;/code&gt; as a separate entry)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;ctrl&amp;gt;+&amp;lt;left&amp;gt;  &amp;lt;alt&amp;gt;+&amp;lt;left&amp;gt;   words&#xA;&amp;lt;ctrl&amp;gt;+&amp;lt;up&amp;gt;  &amp;lt;alt&amp;gt;+&amp;lt;up&amp;gt;       paragraphs&#xA;&amp;lt;home&amp;gt;  &amp;lt;super&amp;gt;+&amp;lt;left&amp;gt;        go to beginning of line&#xA;&amp;lt;end&amp;gt;  &amp;lt;super&amp;gt;+&amp;lt;right&amp;gt;        go to end of line&#xA;&amp;lt;ctrl&amp;gt;+&amp;lt;home&amp;gt;  &amp;lt;super&amp;gt;+&amp;lt;up&amp;gt;   go to top of text&#xA;&amp;lt;ctrl&amp;gt;+&amp;lt;end&amp;gt;  &amp;lt;super&amp;gt;+&amp;lt;down&amp;gt;  go to bottom of text&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install autokey-gtk&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open AutoKey from the Applications drawer&lt;/li&gt;&#xA;&lt;li&gt;Add &quot;New&quot; item and put the existing shortcut in the text field (e.g., &lt;code&gt;&amp;lt;ctrl&amp;gt;+T&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Set the hotkey (e.g., press Cmd+T, which will show as &lt;code&gt;&amp;lt;super&amp;gt;+T&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Keep the rest of the defaults and repeat&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You'll need to deactivate the shortcut conflicts with the Keyboard preference pane, or use these:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings expose-windows &quot;['&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;w']&quot;&#xA;gsettings set org.pantheon.desktop.gala.keybindings expose-all-windows &quot;['&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;A']&quot;&#xA;gsettings set org.gnome.settings-daemon.plugins.media-keys screensaver ''&#xA;gsettings set org.gnome.settings-daemon.plugins.media-keys terminal &quot;['&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;t']&quot;&#xA;gsettings set org.gnome.desktop.wm.keybindings show-desktop &quot;['&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;Down']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This solution might not behave as expected in all applications, but this is only jury-rigged until someone fills &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1624189&quot; rel=&quot;noreferrer&quot;&gt;the feature request&lt;/a&gt; on Launchpad.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-17T07:33:35.400" LastActivityDate="2016-09-17T07:33:35.400" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="7947" PostTypeId="1" AcceptedAnswerId="7949" CreationDate="2016-09-17T10:52:29.860" Score="2" ViewCount="1531" Body="&lt;p&gt;I'm running a freshly installed copy of Loki. Updated the system and installed a few basic packages (Firefox etc. - no kernels or anything likely to upset the system), rebooted and found myself locked out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The password looks to be accepted, however the screen goes blank, and then just dumps me back at the login prompt again. I &lt;em&gt;am&lt;/em&gt; able to log in as this user from a bash prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;auth.log&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sep 17 11:25:46 z600 lightdm: pam_unix(lightdm-greeter:session): session closed for user lightdm&#xA;Sep 17 11:25:46 z600 lightdm: pam_unix(lightdm:session): session opened for user mike by (uid=0)&#xA;Sep 17 11:25:46 z600 systemd-logind[1006]: New session c2 of user mike.&#xA;Sep 17 11:25:46 z600 systemd: pam_unix(systemd-user:session): session opened for user mike by (uid=0)&#xA;Sep 17 11:25:46 z600 systemd-logind[1006]: Removed session c1.&#xA;Sep 17 11:25:46 z600 systemd: pam_unix(systemd-user:session): session closed for user lightdm&#xA;Sep 17 11:25:47 z600 lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;Sep 17 11:25:47 z600 lightdm: PAM adding faulty module: pam_kwallet.so&#xA;Sep 17 11:25:47 z600 lightdm: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;Sep 17 11:25:47 z600 lightdm: PAM adding faulty module: pam_kwallet5.so&#xA;Sep 17 11:25:47 z600 lightdm: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)&#xA;Sep 17 11:25:47 z600 systemd-logind[1006]: New session c3 of user lightdm.&#xA;Sep 17 11:25:47 z600 systemd: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)&#xA;Sep 17 11:25:48 z600 lightdm: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;Sep 17 11:25:48 z600 lightdm: PAM adding faulty module: pam_kwallet.so&#xA;Sep 17 11:25:48 z600 lightdm: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;Sep 17 11:25:48 z600 lightdm: PAM adding faulty module: pam_kwallet5.so&#xA;Sep 17 11:25:48 z600 lightdm: pam_succeed_if(lightdm:auth): requirement &quot;user ingroup nopasswdlogin&quot; not met by user &quot;mike&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lightdm.log&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log&#xA;[+0.00s] DEBUG: Starting Light Display Manager 1.18.2, UID=0 PID=1164&#xA;[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/40-pantheon-greeter.conf&#xA;[+0.00s] DEBUG:   [SeatDefaults] is now called [Seat:*], please update this configuration&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-disable-log-backup.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf&#xA;[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf&#xA;[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager&#xA;[+0.00s] DEBUG: Registered seat module xlocal&#xA;[+0.00s] DEBUG: Registered seat module xremote&#xA;[+0.00s] DEBUG: Registered seat module unity&#xA;[+0.01s] DEBUG: Monitoring logind for seats&#xA;[+0.01s] DEBUG: New seat added from logind: seat0&#xA;[+0.01s] DEBUG: Seat seat0: Loading properties from config section Seat:*&#xA;[+0.01s] DEBUG: Seat seat0: Starting&#xA;[+0.01s] DEBUG: Seat seat0: Creating greeter session&#xA;[+0.01s] DEBUG: Seat seat0: Creating display server of type x&#xA;[+0.01s] DEBUG: Seat seat0: Plymouth is running on VT 1, but this is less than the configured minimum of 7 so not replacing it&#xA;[+0.01s] DEBUG: Quitting Plymouth&#xA;[+0.40s] DEBUG: Using VT 7&#xA;[+0.40s] DEBUG: Seat seat0: Starting local X display on VT 7&#xA;[+0.40s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log&#xA;[+0.40s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0&#xA;[+0.40s] DEBUG: DisplayServer x-0: Launching X Server&#xA;[+0.40s] DEBUG: Launching process 1195: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch&#xA;[+0.40s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0&#xA;[+0.40s] DEBUG: Acquired bus name org.freedesktop.DisplayManager&#xA;[+0.40s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0&#xA;[+1.48s] DEBUG: Loading users from org.freedesktop.Accounts&#xA;[+1.48s] DEBUG: User /org/freedesktop/Accounts/User1000 added&#xA;[+1.79s] DEBUG: Got signal 10 from process 1195&#xA;[+1.79s] DEBUG: DisplayServer x-0: Got signal from X server :0&#xA;[+1.79s] DEBUG: DisplayServer x-0: Connecting to XServer :0&#xA;[+1.79s] DEBUG: Seat seat0: Display server ready, starting session authentication&#xA;[+1.79s] DEBUG: Session pid=1247: Started with service 'lightdm-greeter', username 'lightdm'&#xA;[+1.80s] DEBUG: Session pid=1247: Authentication complete with return value 0: Success&#xA;[+1.80s] DEBUG: Seat seat0: Session authenticated, running command&#xA;[+1.80s] DEBUG: Session pid=1247: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/pantheon-greeter&#xA;[+1.80s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm&#xA;[+1.80s] DEBUG: Session pid=1247: Logging to /var/log/lightdm/seat0-greeter.log&#xA;[+1.86s] DEBUG: Activating VT 7&#xA;[+1.86s] DEBUG: Activating login1 session c1&#xA;[+1.86s] DEBUG: Seat seat0 changes active session to c1&#xA;[+1.86s] DEBUG: Session c1 is already active&#xA;[+2.23s] DEBUG: Greeter connected version=1.18.2 resettable=false&#xA;[+6.87s] DEBUG: Greeter start authentication for mike&#xA;[+6.87s] DEBUG: Session pid=1575: Started with service 'lightdm', username 'mike'&#xA;[+6.88s] DEBUG: Session pid=1575: Got 1 message(s) from PAM&#xA;[+6.88s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+2678.91s] DEBUG: Continue authentication&#xA;[+2679.11s] DEBUG: Session pid=1575: Authentication complete with return value 0: Success&#xA;[+2679.11s] DEBUG: Authenticate result for user mike: Success&#xA;[+2679.11s] DEBUG: User mike authorized&#xA;[+2679.45s] DEBUG: Greeter requests session pantheon&#xA;[+2679.45s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session&#xA;[+2679.45s] DEBUG: Session pid=1247: Sending SIGTERM&#xA;[+2679.45s] DEBUG: Session pid=1247: Exited with return value 0&#xA;[+2679.45s] DEBUG: Seat seat0: Session stopped&#xA;[+2679.45s] DEBUG: Seat seat0: Greeter stopped, running session&#xA;[+2679.45s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0&#xA;[+2679.46s] DEBUG: Session pid=1575: Running command /usr/sbin/lightdm-session gnome-session --session=pantheon&#xA;[+2679.46s] DEBUG: Creating shared data directory /var/lib/lightdm-data/mike&#xA;[+2679.46s] DEBUG: Session pid=1575: Logging to .xsession-errors&#xA;[+2679.54s] DEBUG: Activating VT 7&#xA;[+2679.54s] DEBUG: Activating login1 session c2&#xA;[+2679.54s] DEBUG: Seat seat0 changes active session to c2&#xA;[+2679.54s] DEBUG: Session c2 is already active&#xA;[+2679.55s] DEBUG: Session pid=1575: Exited with return value 1&#xA;[+2679.55s] DEBUG: Seat seat0: Session stopped&#xA;[+2679.55s] DEBUG: Seat seat0: Stopping display server, no sessions require it&#xA;[+2679.55s] DEBUG: Sending signal 15 to process 1195&#xA;[+2680.02s] DEBUG: Process 1195 exited with return value 0&#xA;[+2680.02s] DEBUG: DisplayServer x-0: X server stopped&#xA;[+2680.02s] DEBUG: Releasing VT 7&#xA;[+2680.02s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0&#xA;[+2680.02s] DEBUG: Seat seat0: Display server stopped&#xA;[+2680.02s] DEBUG: Seat seat0: Active display server stopped, starting greeter&#xA;[+2680.02s] DEBUG: Seat seat0: Creating greeter session&#xA;[+2680.02s] DEBUG: Seat seat0: Creating display server of type x&#xA;[+2680.02s] DEBUG: Using VT 7&#xA;[+2680.02s] DEBUG: Seat seat0: Starting local X display on VT 7&#xA;[+2680.02s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log&#xA;[+2680.02s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0&#xA;[+2680.02s] DEBUG: DisplayServer x-0: Launching X Server&#xA;[+2680.02s] DEBUG: Launching process 1723: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch&#xA;[+2680.02s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0&#xA;[+2680.72s] DEBUG: Got signal 10 from process 1723&#xA;[+2680.72s] DEBUG: DisplayServer x-0: Got signal from X server :0&#xA;[+2680.72s] DEBUG: DisplayServer x-0: Connecting to XServer :0&#xA;[+2680.72s] DEBUG: Seat seat0: Display server ready, starting session authentication&#xA;[+2680.72s] DEBUG: Session pid=1730: Started with service 'lightdm-greeter', username 'lightdm'&#xA;[+2680.73s] DEBUG: Session pid=1730: Authentication complete with return value 0: Success&#xA;[+2680.73s] DEBUG: Seat seat0: Session authenticated, running command&#xA;[+2680.73s] DEBUG: Session pid=1730: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/pantheon-greeter&#xA;[+2680.73s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm&#xA;[+2680.73s] DEBUG: Session pid=1730: Logging to /var/log/lightdm/seat0-greeter.log&#xA;[+2680.80s] DEBUG: Activating VT 7&#xA;[+2680.80s] DEBUG: Activating login1 session c3&#xA;[+2680.80s] DEBUG: Seat seat0 changes active session to c3&#xA;[+2680.80s] DEBUG: Session c3 is already active&#xA;[+2681.09s] DEBUG: Greeter connected version=1.18.2 resettable=false&#xA;[+2681.57s] DEBUG: Greeter start authentication for mike&#xA;[+2681.57s] DEBUG: Session pid=1818: Started with service 'lightdm', username 'mike'&#xA;[+2681.57s] DEBUG: Session pid=1818: Got 1 message(s) from PAM&#xA;[+2681.57s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+2712.81s] DEBUG: Session pid=1730: Terminated with signal 1&#xA;[+2712.81s] DEBUG: Seat seat0: Session stopped&#xA;[+2712.81s] DEBUG: Seat seat0: Stopping; failed to start a greeter&#xA;[+2712.81s] DEBUG: Seat seat0: Stopping&#xA;[+2712.81s] DEBUG: Seat seat0: Stopping display server&#xA;[+2712.81s] DEBUG: Sending signal 15 to process 1723&#xA;[+2712.81s] DEBUG: Seat seat0: Stopping session&#xA;[+2712.81s] DEBUG: Session pid=1818: Sending SIGTERM&#xA;[+2712.82s] DEBUG: Session pid=1818: Terminated with signal 15&#xA;[+2712.82s] DEBUG: Session: Failed during authentication&#xA;[+2712.82s] DEBUG: Seat seat0: Session stopped&#xA;[+2712.84s] DEBUG: Got signal 15 from process 1&#xA;[+2712.84s] DEBUG: Caught Terminated signal, shutting down&#xA;[+2712.84s] DEBUG: Stopping display manager&#xA;[+2713.47s] DEBUG: Process 1723 exited with return value 0&#xA;[+2713.47s] DEBUG: DisplayServer x-0: X server stopped&#xA;[+2713.47s] DEBUG: Releasing VT 7&#xA;[+2713.47s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0&#xA;[+2713.47s] DEBUG: Seat seat0: Display server stopped&#xA;[+2713.47s] DEBUG: Seat seat0: Stopped&#xA;[+2713.47s] DEBUG: Display manager stopped&#xA;[+2713.47s] DEBUG: Stopping daemon&#xA;[+2713.48s] DEBUG: Exiting with return value 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of particular interest is the &lt;code&gt;Sep 17 11:25:48 z600 lightdm: pam_succeed_if(lightdm:auth): requirement &quot;user ingroup nopasswdlogin&quot; not met by user &quot;mike&quot;&lt;/code&gt; line in &lt;code&gt;auth.log&lt;/code&gt;. During installation I checked the &lt;em&gt;Log in automatically&lt;/em&gt; option, and then checked the &lt;em&gt;Encrypt home folder&lt;/em&gt; option. I am wondering if perhaps it still configured itself to log in automatically, which obviously isn't possible if the home folder is encrypted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ran the &lt;code&gt;ecryptfs-mount-private&lt;/code&gt; command to check the permissions on &lt;code&gt;.Xauthority&lt;/code&gt; and had my passphrase rejected. Entered my old passphrase, and was able to mount and decrypt my home directory. I believe that changing my password in system settings did not change my encryption password?&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2016-09-17T11:07:07.237" LastActivityDate="2017-01-19T23:00:16.253" Title="Login redirects back to login screen" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7948" PostTypeId="2" ParentId="7546" CreationDate="2016-09-17T11:03:53.243" Score="3" Body="&lt;p&gt;I had the same problem, try to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a &#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this everything works fine for me. I've downloaded some apps and updated OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you can fix it by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -vf /var/lib/apt/lists/*&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6411" LastEditorUserId="26" LastEditDate="2016-11-21T09:06:06.097" LastActivityDate="2016-11-21T09:06:06.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7949" PostTypeId="2" ParentId="7947" CreationDate="2016-09-17T11:42:01.313" Score="1" Body="&lt;p&gt;Answering my own question here. This looks to be a bug with System Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix the issue, I needed to drop into a bash prompt (press &lt;code&gt;Alt + F1&lt;/code&gt; at the login screen), log in as myself. And then did the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ecryptfs-mount-private &#xA;&amp;lt;old_password&amp;gt;&#xA;$ passwd &#xA;Enter existing UNIX password: &amp;lt;current_password&amp;gt;&#xA;Enter new UNIX password: &amp;lt;old_password&amp;gt;&#xA;Retype new UNIX password: &amp;lt;old_password&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Rebooted and can now log back in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The workaround procedure to update your encryption password to match the new login password is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ecryptfs-mount-private &#xA;&amp;lt;old_password&amp;gt;&#xA;$ ecryptfs-rewrap-passphrase ~/.ecryptfs/wrapped-passphrase&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Strangely I can't reproduce this issue. Changing password with &lt;em&gt;System Settings&lt;/em&gt; seems to update the encryption password accordingly now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: This seems to be an ongoing bug &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-useraccounts/+bug/1495348&quot; rel=&quot;nofollow&quot;&gt;on Launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2016-09-19T14:30:16.143" LastActivityDate="2016-09-19T14:30:16.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7951" PostTypeId="2" ParentId="7934" CreationDate="2016-09-17T16:15:39.283" Score="1" Body="&lt;p&gt;As an alternative to Google Chrome you can install the base Chromium browser easily:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Via the App Center. Open App Center, type 'Chrom' in the search bar (upper right of App Center window), select Chromium in the list and click Install.&lt;/p&gt;&#xA;" OwnerUserId="6210" LastEditorUserId="6210" LastEditDate="2016-09-22T02:16:03.230" LastActivityDate="2016-09-22T02:16:03.230" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7953" PostTypeId="1" CreationDate="2016-09-17T19:48:30.823" Score="1" ViewCount="211" Body="&lt;p&gt;I've recently installed eOS Loki and I'm annoyed with its AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After entering 2 letters in the searchbox, it freezes for over 5 seconds because it searches those 2 letters in all apps database. Meanwhile, as I usually know what do I want to search, that means waiting. By the way, the results from 2-letters search probably won't be useful ever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, is there a way to stop automatic searching (so I would press Enter after writing something in search box, I always do that anyway) or increase the limit (so it would start searching at 4 entered characters, when it doesn't cause lags)?&lt;/p&gt;&#xA;" OwnerUserId="6416" LastActivityDate="2016-09-17T19:48:30.823" Title="Disable AppCenter automatic searching to prevent freezes" Tags="|user-interface|appcenter|search|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7954" PostTypeId="2" ParentId="7908" CreationDate="2016-09-17T20:03:32.467" Score="0" Body="&lt;p&gt;If you have inxi 2.3.0 or later, it supports battery condition output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inxi -B&#xA;Battery    BAT1: charge: 39.4 Wh 90.9% condition: 43.3/49.0 Wh (88%)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is very useful to at a glance discover your actual battery capacity (condition:...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'd be surprised at how quickly you can lose battery capacity, depending on your use and charging patterns, basically a lithium ion battery loses capacity at every charge, it varies, but you have between 500 and 1000 full charges. Trickle charging I believe drains the actual capacity even more, but you can google questions about how to maximize battery life/capacity over time, that's a different question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I first checked all my battery capacity, I was actually shocked to learn how much capacity some of my batteries had lost, some were only at 15% of original, which means, less than 1 hour actual life, for example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There other ways of getting battery information, inxi for example gets the data directly from /sys, which is where all tools get it as far as I know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that a standard battery icon monitor in your taskbar will NOT show you the capacity state, it will show you the percent charged of the real capacity, for example, if you are at 50% capacity, and your battery monitor shows 98% charged, that means that you have 49% of your original starting capacity of 100% available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To see what your system is doing when it's just running, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;top&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to see cpu use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;inxi can also show you top cpu processes like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inxi -xtc20&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which will show you your top 20 processes sorted by cpu consumption.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps aux also will show you this but it's harder to read.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're seeing anything that is running at any significant cpu percent (firefox/chrome are frequent culprits, with out of control javascript stuff running in multiple tabs, can quite easily spike cpu to 100%, or at least 50%, and keep it there. Solution: noscript, flashblock)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In answer to your question, is there any way to get the battery life back, no, there probably is not, it's a physical event that happens either around the cathodes or anodes of the battery, I forget, but basically that breaks down internally and loses its ability to transfer more and more of battery power, which is why all the rechargeable lithion, nickel metal hydride, etc, type batteries steadily lose capacity over their lives, from the first charge on basically. Some people claim you can condition them, which is worth trying since it doesn't cost anything, but I haven't personally found that helps much, but it's worth trying, but if you have 50% capacity, that's what you have.&lt;/p&gt;&#xA;" OwnerUserId="6418" LastEditorUserId="6418" LastEditDate="2016-09-17T20:10:32.340" LastActivityDate="2016-09-17T20:10:32.340" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="7956" PostTypeId="2" ParentId="7588" CreationDate="2016-09-17T21:11:46.130" Score="1" Body="&lt;p&gt;There is a palm detection method&lt;br&gt;&#xA;Try this: &lt;a href=&quot;https://wiki.archlinux.org/index.php/Touchpad_Synaptics#Disable_touchpad_while_typing&quot; rel=&quot;nofollow&quot;&gt;https://wiki.archlinux.org/index.php/Touchpad_Synaptics#Disable_touchpad_while_typing&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6360" LastActivityDate="2016-09-17T21:11:46.130" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7958" PostTypeId="2" ParentId="7932" CreationDate="2016-09-17T21:40:58.057" Score="2" Body="&lt;p&gt;Install gdebi :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install gdebi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Now, right click on the .deb pckage and select to open it with gdebi.&lt;/p&gt;&#xA;" OwnerUserId="6335" LastActivityDate="2016-09-17T21:40:58.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7960" PostTypeId="2" ParentId="7932" CreationDate="2016-09-18T00:12:51.057" Score="1" Body="&lt;p&gt;If you go by command line, there are numerous ways to install the .deb packages but I’ll go with the simplest one. Open a terminal and use the following command:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install (path to deb package)&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://itsfoss.com/fix-application-installation-issues-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/fix-application-installation-issues-elementary-os-loki/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="26" LastEditDate="2021-08-10T19:54:34.570" LastActivityDate="2021-08-10T19:54:34.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="7961" PostTypeId="1" CreationDate="2016-09-18T00:34:57.567" Score="2" ViewCount="1460" Body="&lt;p&gt;I have a Lenovo X1 Carbon Gen 3 with an internal hidpi display (2560x1440) and I have an external display attached to HDMI1 (1600x900). By default the internal display is scaled down and everything looks great. The external display is also scaled, so everything looks twice as big as it should be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the easiest way to keep the internal display as-is and scale the external display back to standard size (1:1)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some searching and got this page at the Arch Wiki:&#xA;&lt;a href=&quot;https://wiki.archlinux.org/index.php/HiDPI#Multiple_displays&quot; rel=&quot;nofollow&quot;&gt;https://wiki.archlinux.org/index.php/HiDPI#Multiple_displays&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried xrandr as shown in the example on the wiki page above, but it crashed the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm relatively new to Linux, which is why I choose to go with elementary OS, and I would prefer to use a GUI tool if possible. As a matter of fact, Why is this capability not available from the Displays settings panel?&lt;/p&gt;&#xA;" OwnerUserId="6422" LastEditorUserId="26" LastEditDate="2016-09-25T15:59:04.387" LastActivityDate="2017-02-19T12:36:31.073" Title="How to scale desktop on second display?" Tags="|release-loki|settings|desktop|display|hidpi|" AnswerCount="1" CommentCount="0" ClosedDate="2017-02-19T20:38:42.830" ContentLicense="CC BY-SA 3.0" />
  <row Id="7963" PostTypeId="1" CreationDate="2016-09-18T05:51:36.530" Score="5" ViewCount="240" Body="&lt;p&gt;Pantheon-Files has a feature of assigning color to file/directory names displayed. I want to make a script in Bash/Python to do the same automatically.&lt;/p&gt;&#xA;" OwnerUserId="3427" LastActivityDate="2016-12-08T10:24:07.420" Title="How can I change label color for any entry in Files, using scripts?" Tags="|release-loki|pantheon-files|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7965" PostTypeId="1" CreationDate="2016-09-18T08:38:48.747" Score="0" ViewCount="847" Body="&lt;p&gt;I need to sync my Google photos (preferably the default photos app.)&#xA;How can I do this?&#xA;Thanks, Ben&lt;/p&gt;&#xA;" OwnerUserId="6326" LastActivityDate="2017-07-21T22:17:01.583" Title="How do I sync my google photos using the photos app?" Tags="|photos|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7966" PostTypeId="2" ParentId="7703" CreationDate="2016-09-18T10:44:26.277" Score="0" Body="&lt;p&gt;I've also run into this problem, which I think has two parts. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;It appears that the PrintSc button itself is not mapped. I have successfully mapped Ctrl+0 to work with gnome-screenshot, but when I tried to map PrintSc to the command, it didn't work. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It appears that the native Print Screen command doesn't work. I thought that if I could map Ctrl+0 to the gnome-screenshot command, then it would work, but when I tried to do this through the keyboard shortcuts menu, it did not work. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6371" LastActivityDate="2016-09-18T10:44:26.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7967" PostTypeId="1" AcceptedAnswerId="7975" CreationDate="2016-09-18T11:34:32.423" Score="2" ViewCount="3663" Body="&lt;p&gt;I have an Intel i5 processor with a HD IGP and a Nvidia 950M, but all applications use the Intel HD. How can I switch graphics when I run a game?&lt;/p&gt;&#xA;" OwnerUserId="6430" LastEditorUserId="68" LastEditDate="2016-10-01T23:36:22.837" LastActivityDate="2016-10-01T23:36:44.350" Title="How can i switch between Intel and Nvidia Graphics card?" Tags="|graphics|nvidia|intel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7970" PostTypeId="2" ParentId="7965" CreationDate="2016-09-18T12:42:51.750" Score="1" Body="&lt;p&gt;I am not aware of any built-in way of syncing however, I would give overgrive a look they've got a 14 day trial and its $4.99 for a license. Basically integrates Google Drive into your desktop and by some parallels possibly your Google photos. &lt;/p&gt;&#xA;" OwnerUserId="6432" LastActivityDate="2016-09-18T12:42:51.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7971" PostTypeId="1" CreationDate="2016-09-18T14:43:43.890" Score="0" ViewCount="341" Body="&lt;p&gt;Using the following codes, I installed GNOME Build Tool but don't know how to remove them. Tried with &quot;make clean&quot; and similar commands but they don't work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone git://git.gnome.org/jhbuild&#xA;cd jhbuild&#xA;./autogen.sh&#xA;make&#xA;make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I want to delete whole program from my laptop.&lt;/p&gt;&#xA;" OwnerUserId="5159" LastActivityDate="2016-09-18T16:18:03.830" Title="How to remove GNOME Build Tools?" Tags="|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7972" PostTypeId="1" CreationDate="2016-09-18T14:51:17.660" Score="0" ViewCount="273" Body="&lt;p&gt;I tried to create a virtual machine with parallels, but the iso file is not readable by parallels that gives this message: not possible to detect the operative system&lt;/p&gt;&#xA;" OwnerUserId="6435" LastActivityDate="2017-02-08T05:33:54.847" Title="Parallels doesn't open the installation file" Tags="|virtualization|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7973" PostTypeId="1" CreationDate="2016-09-18T15:01:45.027" Score="4" ViewCount="934" Body="&lt;p&gt;After enabling media shares in switchboard, I would expect to see my machine in the networks section in pantheon-files on another eOS loki machine in my network. I cannot find it anywhere. How do I find these? &#xA;Also, when trying to send a file via Bluetooth (again enabled in switchboard, all settings always/askme/paired tried), it greets me with an error message (which just says there was en error without describing it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some additional information: i can ping between the machines, i can use bluetooth on both machines with other devices (just receiving files does not work, also not from android), there is no firewall in my network, I can access other windows shares without problems.&lt;/p&gt;&#xA;" OwnerUserId="6436" LastActivityDate="2019-12-29T19:28:54.293" Title="How to use media shares in loki" Tags="|pantheon-files|networking|bluetooth|switchboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7974" PostTypeId="1" CreationDate="2016-09-18T15:17:32.207" Score="3" ViewCount="999" Body="&lt;p&gt;In Freya (and OS X), I could rest 2 fingers on the track pad and click the mouse button to right-click. (I have a 2008 MacBookPro with the actual physical button on the trackpad).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the upgrade to Loki, I can't right click! I've tried both the previously mentioned two-finger click AND holding Command-Click. Neither works! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I turn on touch gestures in System Settings, the two-finger tap definitely works, but I seem to have broken it while trying to configure a custom xorg.conf file for the synaptics driver. &lt;/p&gt;&#xA;" OwnerUserId="6438" LastEditorUserId="45" LastEditDate="2016-12-06T18:15:02.957" LastActivityDate="2016-12-06T19:11:01.753" Title="How can I set the physical button to act as right click on an older MacBook?" Tags="|release-loki|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7975" PostTypeId="2" ParentId="7967" CreationDate="2016-09-18T16:11:54.483" Score="1" Body="&lt;p&gt;First you need to install the official nvidia drivers: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, after rebooting, you can choose the card to use in the programm &quot;NVIDIA X Server Settings&quot; in the option &quot;PRIME-Profiles&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that you can't use both at the same time. You either have to render everything using Nvidia, or everything using Intel.&lt;/p&gt;&#xA;" OwnerUserId="6436" LastEditorUserId="68" LastEditDate="2016-10-01T23:36:44.350" LastActivityDate="2016-10-01T23:36:44.350" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7976" PostTypeId="2" ParentId="7971" CreationDate="2016-09-18T16:18:03.830" Score="1" Body="&lt;p&gt;If &lt;code&gt;make uninstall&lt;/code&gt; does not work, your're probably out of luck. You can still search for the installed files in the jhbuild folder, and delete the from your filesystem manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For future installs: use &lt;code&gt;sudo checkinstall&lt;/code&gt; instead of &lt;code&gt;sudo make install&lt;/code&gt;, to install the files as a deb managable by your package manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You probably have to install checkinstall first:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install checkinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6436" LastActivityDate="2016-09-18T16:18:03.830" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7977" PostTypeId="2" ParentId="12155" CreationDate="2016-09-18T16:47:31.663" Score="2" Body="&lt;p&gt;Same issue here, to temporarily avoid that wait of 5 minutes:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;press &lt;code&gt;alt+f1&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;enter your username/password&lt;/li&gt;&#xA;&lt;li&gt;restart lightdm with &lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6433" LastActivityDate="2016-09-18T16:47:31.663" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7979" PostTypeId="2" ParentId="7772" CreationDate="2016-09-18T17:03:00.077" Score="1" Body="&lt;p&gt;That would be an issue with your graphics card driver. The fix would be to install the driver appropriate driver for your gpu. Unfortunately there is no easy way to do it as I'm in your same situation with my AMD gpu, if you're running Nvidia you might have more luck, a Google search might turn up a fix. &lt;/p&gt;&#xA;" OwnerUserId="6432" LastActivityDate="2016-09-18T17:03:00.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7982" PostTypeId="2" ParentId="7742" CreationDate="2016-09-18T17:38:46.170" Score="4" Body="&lt;p&gt;Same here ! I find this very annoying !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume elementaryOs developers do not use Alt+Tab because juste the normal Alt+Tab is very annoying too: masking all windows, showing the next windows and a fake plank ... that's not what we are used to, with other desktop and I don't see any benefit with this behaviour !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And don't tell me, it's easier for novice users: they never use Alt+Tab !&#xA;It's only for experienced users.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2016-09-18T17:38:46.170" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="7983" PostTypeId="2" ParentId="7934" CreationDate="2016-09-18T18:27:01.030" Score="7" Body="&lt;p&gt;the official Google Chrome app can be downloaded from Google&#xA;Just download the Deb package and then on a terminal browse to the folder where the deb package is and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install google-chrome-stable_current_amd64.deb&#xA;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Link to deb package: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;https://www.google.com/chrome/browser/thankyou.html?platform=linux&amp;amp;installdataindex=defaultbrowser&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6443" LastEditorUserId="578" LastEditDate="2017-01-17T11:58:02.643" LastActivityDate="2017-01-17T11:58:02.643" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="7984" PostTypeId="1" CreationDate="2016-09-18T19:00:32.127" Score="0" ViewCount="629" Body="&lt;p&gt;I have a MacbookAir6,1 (2013/14) model and with elementaryOS Luna it does not shutdown - just hangs on the eOS splash screen so I have to force off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it runs hot quite easily. Do you know of any optimisations out there specifically for MacBookAir or Macbook's that I can run to make it run cooler?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="6043" LastActivityDate="2016-09-19T07:19:37.403" Title="Apple Macbook Air Optimisation" Tags="|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7986" PostTypeId="2" ParentId="7984" CreationDate="2016-09-18T19:50:27.497" Score="0" Body="&lt;p&gt;Check this post install on a MacBook Air for various distros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/1Claude/linux_on_Macbook_Air&quot; rel=&quot;nofollow&quot;&gt;https://github.com/1Claude/linux_on_Macbook_Air&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6444" LastActivityDate="2016-09-18T19:50:27.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7987" PostTypeId="1" CreationDate="2016-09-18T21:06:08.687" Score="6" ViewCount="8816" Body="&lt;p&gt;Looking for the command to open a new terminal instance and suggestions I've found to use &lt;code&gt;terminal&lt;/code&gt; or &lt;code&gt;gnome-terminal&lt;/code&gt; are incorrect&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2020-02-06T21:12:25.773" Title="Name of elementary OS terminal (to open new terminal window from within Terminal)" Tags="|pantheon-terminal|command-line|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7988" PostTypeId="2" ParentId="7987" CreationDate="2016-09-18T21:06:08.687" Score="6" Body="&lt;p&gt;The command to run is:&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;code&gt;pantheon-terminal&lt;/code&gt;&lt;/h2&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-18T21:06:08.687" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7989" PostTypeId="1" CreationDate="2016-09-18T21:08:40.083" Score="4" ViewCount="1581" Body="&lt;p&gt;What are the differences between &lt;code&gt;gnome-terminal&lt;/code&gt; and &lt;code&gt;pantheon-terminal&lt;/code&gt; and what are the advantages of using one over the other?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T03:40:16.387" LastActivityDate="2016-09-28T03:40:16.387" Title="Differences between gnome-terminal and pantheon-terminal" Tags="|pantheon-terminal|gnome-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7990" PostTypeId="1" CreationDate="2016-09-18T22:58:44.493" Score="1" ViewCount="207" Body="&lt;p&gt;&lt;strong&gt;Steps to reproduce&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Introduce an OwnCloud account via CalDAV&lt;/li&gt;&#xA;&lt;li&gt;Create some event (Reboot if you want)&lt;/li&gt;&#xA;&lt;li&gt;Open Maya and go to this day. It'll show no event this day&lt;/li&gt;&#xA;&lt;li&gt;Check out the day after. The event will appear.&lt;/li&gt;&#xA;&lt;li&gt;Try opening the Wingpanel access and go to this day. The event is correctly shown (the number isn't bold, but the day is correct).&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6450" LastActivityDate="2016-09-22T06:59:53.370" Title="Maya shows the events the day after but the integration with Wingpanel works perfect" Tags="|calendar|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-22T22:47:10.447" ContentLicense="CC BY-SA 3.0" />
  <row Id="7991" PostTypeId="2" ParentId="7989" CreationDate="2016-09-18T23:38:18.333" Score="4" Body="&lt;p&gt;When comparing Gnome Terminal vs&#xA;Pantheon Terminal, the Slant community recommends Pantheon Terminal for most people. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the question “What are the best Linux terminal emulators?” Pantheon Terminal is ranked 5th while Gnome Terminal is ranked 6th.&#xA;The most important reason people chose Pantheon Terminal is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When a process has ended, Pantheon Terminal sends a notification bubble to the desktop notification server and indicates which tab generated the notification.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.slant.co/versus/2442/2463/~gnome-terminal_vs_pantheon-terminal&quot; rel=&quot;nofollow&quot;&gt;https://www.slant.co/versus/2442/2463/~gnome-terminal_vs_pantheon-terminal&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-09-19T00:06:42.067" LastActivityDate="2016-09-19T00:06:42.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7994" PostTypeId="2" ParentId="7974" CreationDate="2016-09-19T04:29:51.470" Score="3" Body="&lt;p&gt;elementary OS Loki uses a new input stack called LibInput, so previous methods of configuring the trackpad through the command line or config files may not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default, Loki should detect the right method of secondary-clicking according to your hardware. If you'd like to change it, visit &lt;strong&gt;System Settings&lt;/strong&gt; &gt; &lt;strong&gt;Mouse &amp;amp; Touchpad&lt;/strong&gt; and choose an option under &lt;strong&gt;Physical Clicking&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-09-19T04:29:51.470" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="7995" PostTypeId="1" CreationDate="2016-09-19T04:54:44.443" Score="1" ViewCount="307" Body="&lt;p&gt;Installed elementary OS Loki because it comes with linux kernel V4 that support new hardware but after installation I found out that Ubuntu 16.04 won't support my AMD R9 390 because new Xorg V 1.18 doesn't work with crimson driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The alternative is AMDGPU, installed by default but not supporting my card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to make it work for Steam gaming?&lt;/p&gt;&#xA;" OwnerUserId="6453" LastEditorUserId="26" LastEditDate="2016-09-25T16:55:24.710" LastActivityDate="2016-10-05T07:07:27.473" Title="AMD R9 390 not running games with AMDGPU" Tags="|release-loki|graphic-drivers|display|drivers|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7996" PostTypeId="2" ParentId="7903" CreationDate="2016-09-19T05:56:30.177" Score="2" Body="&lt;p&gt;This worked perfectly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install software-properties-common&#xA;&#xA;sudo add-apt-repository ppa:bitcoin/bitcoin&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install bitcoin-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6317" LastActivityDate="2016-09-19T05:56:30.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7997" PostTypeId="2" ParentId="7984" CreationDate="2016-09-19T07:19:37.403" Score="1" Body="&lt;p&gt;I installed this again yesterday alongside my current main distro of Lubuntu and I have noticed the shutdown issue is no longer there so maybe resolved and bundled in the ISO or an update to the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, I have does the first few steps of the guide just not the one after installing Thermalds which involves a lot of tweaking (too much tweaking scares me). I'll see how it runs and let you know if input the rest.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your time.&lt;/p&gt;&#xA;" OwnerUserId="6043" LastActivityDate="2016-09-19T07:19:37.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="7998" PostTypeId="1" CreationDate="2016-09-19T07:59:21.770" Score="2" ViewCount="3292" Body="&lt;p&gt;In KDE I have a button &quot;Import&quot; which can be used to import VPN connection from &lt;code&gt;.ovpn&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to do it in elementary OS Loki?&lt;/p&gt;&#xA;" OwnerUserId="622" LastActivityDate="2019-05-29T07:56:37.137" Title="How to add a new VPN connection in Loki using .ovpn file?" Tags="|release-loki|openvpn|vpn|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="7999" PostTypeId="1" CreationDate="2016-09-19T11:06:52.303" Score="2" ViewCount="940" Body="&lt;p&gt;I have installed Numix theme following these instructions (&lt;a href=&quot;https://itsfoss.com/install-numix-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;https://itsfoss.com/install-numix-ubuntu/&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to change the title bar height, making it slimmer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any css I could edit to achieve it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: I'm using elementary loki&lt;/p&gt;&#xA;" OwnerUserId="244" LastActivityDate="2016-09-19T16:09:12.577" Title="Customize Numix theme: title bar header height" Tags="|themes|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8002" PostTypeId="1" CreationDate="2016-09-19T13:34:48.097" Score="1" ViewCount="58" Body="&lt;p&gt;If it is another OS then how was the first OS made?&lt;/p&gt;&#xA;" OwnerUserId="6461" LastActivityDate="2016-09-19T13:46:26.320" Title="In which thing OS is developed/written?" Tags="|development|design|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8003" PostTypeId="2" ParentId="8002" CreationDate="2016-09-19T13:46:26.320" Score="3" Body="&lt;p&gt;The short version is this: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary is based on Ubuntu.&lt;/li&gt;&#xA;&lt;li&gt;Ubuntu is based on Debian.&lt;/li&gt;&#xA;&lt;li&gt;Debian was one of the first Linux distros.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Each distro takes the foundation laid by the previous one and uses it to build something new.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the long version, see &lt;a href=&quot;http://arstechnica.com/information-technology/2011/08/march-of-the-penguin-ars-looks-back-at-20-years-of-linux/&quot; rel=&quot;nofollow&quot;&gt;the history of Linux&lt;/a&gt; and &lt;a href=&quot;http://arstechnica.com/information-technology/2014/10/ten-years-of-ubuntu-how-linuxs-beloved-newcomer-became-its-criticized-king/&quot; rel=&quot;nofollow&quot;&gt;the first ten years of Ubuntu&lt;/a&gt;. For more on how elementary OS came to be, see &lt;a href=&quot;https://www.wired.com/2013/11/elementaryos/&quot; rel=&quot;nofollow&quot;&gt;Wired's article on elementary OS&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-19T13:46:26.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8004" PostTypeId="2" ParentId="7112" CreationDate="2016-09-19T14:19:10.580" Score="1" Body="&lt;p&gt;I encountered the same problem the other day. To update your encryption passphrase to match your login password, you need to use the &lt;code&gt;ecryptfs-rewrap-passphrase&lt;/code&gt; command. There is a more detailed answer in my post here: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7949/5722&quot;&gt;https://elementaryos.stackexchange.com/a/7949/5722&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, I have tried to replicate this issue but have been unable to. Using &lt;em&gt;System Settings&lt;/em&gt; to change my password seemed to reliably update the encryption passphrase in all subsequent attempts.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2016-09-19T14:31:12.397" LastActivityDate="2016-09-19T14:31:12.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8006" PostTypeId="2" ParentId="7998" CreationDate="2016-09-19T15:02:34.313" Score="1" Body="&lt;p&gt;In Loki, openvpn and networkmanager-openvpn are already installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To import an *.ovpn, you need to make sure you have certificate files separate from the *.ovpn.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then go to System Settings -&gt; Network -&gt; VPN. Click the &quot;+&quot;, then in the window that pops up, click on &quot;Add&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the dropdown you'll see &quot;Import a Saved VPN connection&quot;. &lt;/p&gt;&#xA;" OwnerUserId="6465" LastActivityDate="2016-09-19T15:02:34.313" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8007" PostTypeId="1" CreationDate="2016-09-19T15:37:13.523" Score="0" ViewCount="1908" Body="&lt;p&gt;Is there a elementary OS 5.0 in development? Because I would love to send some feedback! Also i would like to see hex-chat as a built in support software.&lt;/p&gt;&#xA;" OwnerUserId="6467" LastEditorUserId="26" LastEditDate="2016-09-25T16:08:33.237" LastActivityDate="2016-09-25T16:08:33.237" Title="Will there be elementary OS 5.0" Tags="|software-recommendation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8008" PostTypeId="2" ParentId="1289" CreationDate="2016-09-19T15:49:26.577" Score="1" Body="&lt;p&gt;Yes it is safe. &#xA;But there is a possible risk of accidentally corrupting the main environment so i would recommend to leave any files you don't know about alone.&lt;/p&gt;&#xA;" OwnerUserId="6467" LastActivityDate="2016-09-19T15:49:26.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8009" PostTypeId="2" ParentId="8007" CreationDate="2016-09-19T15:54:24.027" Score="1" Body="&lt;p&gt;Development for elementary 0.5 will be happening in the &lt;a href=&quot;https://launchpad.net/elementaryos/+milestone/loki+1-beta1&quot; rel=&quot;nofollow&quot;&gt;&lt;em&gt;future&lt;/em&gt; series on Launchpad&lt;/a&gt;, however currently there are no changes, only bug reports (not surprising given that elementary 0.4 was only released this month).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are referring to being able to install Hexchat on Loki, it can be found in AppCenter (or can be installed with &lt;code&gt;sudo apt install hexchat&lt;/code&gt;). If you meant you would like to be able to request support via Hexchat, you can join the elementary IRC channel #elementary on Freenode.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-19T15:54:24.027" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8010" PostTypeId="2" ParentId="7999" CreationDate="2016-09-19T16:09:12.577" Score="2" Body="&lt;p&gt;Try this tool: &lt;a href=&quot;https://github.com/actionless/oomox#oomox&quot; rel=&quot;nofollow&quot;&gt;https://github.com/actionless/oomox#oomox&lt;/a&gt; &lt;br&gt;&#xA;sudo add-apt-repository ppa:nilarimogard/webupd8 &lt;br&gt;&#xA;sudo apt update &lt;br&gt;&#xA;sudo apt install oomox &lt;br&gt;&lt;/p&gt;&#xA;" OwnerUserId="6360" LastActivityDate="2016-09-19T16:09:12.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8012" PostTypeId="1" CreationDate="2016-09-19T17:29:42.933" Score="1" ViewCount="929" Body="&lt;p&gt;I like sleep with music (spotify), but when i turn off both monitor elementary go sleep mode and stop music. How can i disable sleep mode?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx.&lt;/p&gt;&#xA;" OwnerUserId="6430" LastActivityDate="2016-09-20T18:44:58.400" Title="how can i disable sleep mode when i turn off pc monitor (close notebook)" Tags="|laptop|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8013" PostTypeId="1" CreationDate="2016-09-19T19:04:21.227" Score="1" ViewCount="79" Body="&lt;p&gt;I followed a tutorial from this forum to get TeamSpeak3 installed. Great! Then , to launch it from the menu, it instructed me to create a teamspeak.desktop file in the /usr/share/applications/ folder. Whenever I try using scratch, it won't let me save the file. I can place the same file in documents. I also tried to use chmod to change the permissions for the applications folder. It's not permitted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help.&lt;/p&gt;&#xA;" OwnerUserId="6468" LastActivityDate="2016-09-19T19:19:32.190" Title="How to create an app menu item to run TeamSpeak3 installed app" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8014" PostTypeId="2" ParentId="8013" CreationDate="2016-09-19T19:19:32.190" Score="1" Body="&lt;p&gt;If you want to save or modify a file or folder as root you can open Files as root, right-click in Files and open Files as Administrator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can to open Scratch with sudo and save your file teamspeak.desktop in /usr/share/applications/ folder.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course if you want to create just a entry in the menu without be root, you can put your own .desktop files in &quot;~/.local/share/applications/&quot;. It's more safe.&lt;/p&gt;&#xA;" OwnerUserId="6249" LastActivityDate="2016-09-19T19:19:32.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8015" PostTypeId="1" CreationDate="2016-09-19T20:20:27.287" Score="2" ViewCount="13630" Body="&lt;p&gt;I just installed the loki os and its amazing. I love it...I had some problems with all the repositories about adding elementary tweaks and its okey now...I solved it but please,please tell me how can i install a darker theme. I tried just like I said adding all the different repos that i read about on the communuties but none of them are usefull. It allways gives me the same answer &quot;unable to locate!&quot;&#xA;Help?&lt;/p&gt;&#xA;" OwnerUserId="6457" LastActivityDate="2016-09-21T08:19:06.470" Title="dark theme loki" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8016" PostTypeId="1" CreationDate="2016-09-19T20:21:06.423" Score="1" ViewCount="957" Body="&lt;p&gt;So I've been fiddling around with getting eOS on my Acer Aspire Switch ever since I got eOS on my main PC. It's been without success so far. Well, I can boot into the lice is using bootia32.efi but from there I still can't install the is as it tells me that grub64 is missing at the last stage of the install. Any way to fix this ?&lt;/p&gt;&#xA;" OwnerUserId="6470" LastEditorUserId="26" LastEditDate="2016-09-25T16:56:51.570" LastActivityDate="2016-09-30T07:48:27.027" Title="Installing elementary OS on a UEFI 32bit Baytrail" Tags="|uefi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8017" PostTypeId="2" ParentId="7880" CreationDate="2016-09-20T01:26:43.210" Score="1" Body="&lt;p&gt;Try also changing the /usr/share/applications/viber.desktop file to be like the one here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;[Desktop Entry]&#xA;Name=Viber&#xA;Comment=Viber VoIP and messenger&#xA;Exec=env XDG_CURRENT_DESKTOP=Unity /opt/viber/Viber&#xA;Icon=/usr/share/pixmaps/viber.png&#xA;Terminal=false&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Categories=Network;Application;&#xA;Path=&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Got it from &lt;a href=&quot;https://github.com/mank319/elementaryPlus/issues/399#issuecomment-238048358&quot; rel=&quot;nofollow&quot;&gt;this&lt;/a&gt; (which applies to the elementaryPlus icon set, but it should work with the stock elementary icon theme as well). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what I did to make the Viber icons show up. &lt;/p&gt;&#xA;" OwnerUserId="6465" LastActivityDate="2016-09-20T01:26:43.210" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8020" PostTypeId="1" AcceptedAnswerId="8021" CreationDate="2016-09-20T03:44:39.277" Score="3" ViewCount="19823" Body="&lt;p&gt;All I want is to open my current window as root but all the hits are about adding contextual menu options. How can I open this folder as root just this once?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2018-11-30T20:09:33.097" Title="Run Pantheon Files as root" Tags="|pantheon-files|root|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8021" PostTypeId="2" ParentId="8020" CreationDate="2016-09-20T03:44:39.277" Score="5" Body="&lt;ol&gt;&#xA;&lt;li&gt;Enter the following command in Terminal &lt;code&gt;io.elementary.files-pkexec&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In the old Files window, press &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt; to get your current path&lt;/li&gt;&#xA;&lt;li&gt;In your new Files window, press &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt;, paste in the path you just copied, and press enter.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2018-11-30T20:09:33.097" LastActivityDate="2018-11-30T20:09:33.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8022" PostTypeId="2" ParentId="8020" CreationDate="2016-09-20T05:55:36.557" Score="0" Body="&lt;p&gt;Another way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2015/02/open-as-root-elementary-os-freya/&quot; rel=&quot;nofollow&quot;&gt;http://ubuntuhandbook.org/index.php/2015/02/open-as-root-elementary-os-freya/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works for Loki and Freya.&lt;/p&gt;&#xA;" OwnerUserId="6194" LastActivityDate="2016-09-20T05:55:36.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8024" PostTypeId="1" CreationDate="2016-09-20T10:00:16.467" Score="5" ViewCount="2628" Body="&lt;p&gt;Mail application gets elongated.&#xA;And no email is readable due to less vertical space.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MqtHb.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MqtHb.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6234" LastActivityDate="2016-10-17T19:14:10.267" Title="pantheon-mail horizontal elongation" Tags="|release-loki|pantheon-mail|" AnswerCount="3" CommentCount="6" ClosedDate="2016-11-29T11:48:58.710" ContentLicense="CC BY-SA 3.0" />
  <row Id="8025" PostTypeId="1" AcceptedAnswerId="8186" CreationDate="2016-09-20T10:44:12.557" Score="1" ViewCount="125" Body="&lt;p&gt;I have installed the latest Elementary OS Loki Release (not a BETA version). Sometimes when the system wakes up from sleep, after I log in, I see this behavior of the system. Almost all the text is gone as you can see in the picture: The Application Menu, System Settings, Notifications bubbles, Terminal, Files, (all apps). The problem is solved when I reboot the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I mention that I installed elementary tweaks from &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;this github project&lt;/a&gt;, but I don't think that it has to do with this bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how can I solve this problem? Is it a known bug that will be solved in some future updates? Can it be a graphics driver issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/c21Hl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c21Hl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6291" LastActivityDate="2016-09-25T17:26:15.250" Title="Loki System text malformed" Tags="|release-loki|graphic-drivers|greeter|" AnswerCount="2" CommentCount="0" ClosedDate="2019-04-19T21:06:55.597" ContentLicense="CC BY-SA 3.0" />
  <row Id="8026" PostTypeId="1" AcceptedAnswerId="10127" CreationDate="2016-09-20T12:28:50.203" Score="1" ViewCount="1007" Body="&lt;p&gt;I just checked out the new Deepin 15.3 Release. &#xA;But I'm more comfortable with elementary OS. I find the New Deepin Terminal Awesome. Any way to install this New Deepin Terminal on elementary OS Loki?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="6199" LastActivityDate="2017-01-15T19:09:06.783" Title="Installing Deepin Terminal" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8027" PostTypeId="1" CreationDate="2016-09-20T12:52:06.683" Score="0" ViewCount="1104" Body="&lt;p&gt;I am trying to disable palm detection or the disabling of the trackpad while using the keyboard.  It makes gaming impossible if you use a touchpad to do so.  I have found the setting to disable the feature i want removed but i can't seem to make it stay as default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xinput set-prop 12 299 0&lt;/code&gt; i achieved the setting i would like.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;⎡ Virtual core pointer                     id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ PS/2 Generic Mouse                        id=11   [slave  pointer  (2)]&#xA;⎜   ↳ SynPS/2 Synaptics TouchPad                id=12   [slave  pointer  (2)]&#xA;⎜   ↳ reserved Pineapple 2.4G Optical Mouse     id=14   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ HP Webcam [2 MP Macro]                    id=9    [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=10   [slave  keyboard (3)]&#xA;    ↳ HP WMI hotkeys                            id=13   [slave  keyboard (3)]&#xA;jeff@jeff-HP-EliteBook-8540p:~$ xinput list-props 12&#xA;Device 'SynPS/2 Synaptics TouchPad':&#xA;    Device Enabled (142):   1&#xA;    Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&#xA;    libinput Tapping Enabled (293): 0&#xA;    libinput Tapping Enabled Default (294): 0&#xA;    libinput Tapping Drag Enabled (295):    1&#xA;    libinput Tapping Drag Enabled Default (296):    1&#xA;    libinput Tapping Drag Lock Enabled (297):   0&#xA;    libinput Tapping Drag Lock Enabled Default (298):   0&#xA;    libinput Accel Speed (276): 0.000000&#xA;    libinput Accel Speed Default (277): 0.000000&#xA;    libinput Natural Scrolling Enabled (281):   0&#xA;    libinput Natural Scrolling Enabled Default (282):   0&#xA;    libinput Send Events Modes Available (260): 1, 1&#xA;    libinput Send Events Mode Enabled (261):    0, 0&#xA;    libinput Send Events Mode Enabled Default (262):    0, 0&#xA;    libinput Left Handed Enabled (283): 0&#xA;    libinput Left Handed Enabled Default (284): 0&#xA;    libinput Scroll Methods Available (285):    1, 1, 0&#xA;    libinput Scroll Method Enabled (286):   1, 0, 0&#xA;    libinput Scroll Method Enabled Default (287):   1, 0, 0&#xA;    libinput Disable While Typing Enabled (299):    0&#xA;    libinput Disable While Typing Enabled Default (300):    1&#xA;    Device Node (263):  &quot;/dev/input/event6&quot;&#xA;    Device Product ID (264):    2, 7&#xA;    libinput Drag Lock Buttons (292):   &amp;lt;no items&amp;gt;&#xA;    libinput Horizonal Scroll Enabled (265):    1&#xA;&lt;/code&gt;&#xA;As you can see, 299 and 300 are similar but 300 says default.  I am getting an error when trying to change 300.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo xinput set-prop 12 300 0&#xA;X Error of failed request:  BadAccess (attempt to access private resource denied)&#xA;  Major opcode of failed request:  131 (XInputExtension)&#xA;  Minor opcode of failed request:  57 ()&#xA;  Serial number of failed request:  19&#xA;  Current serial number in output stream:  20&#xA;&lt;/code&gt;  Is there any way around this or is there anything i can add to set this at startup?&lt;/p&gt;&#xA;" OwnerUserId="6472" LastActivityDate="2016-09-20T20:13:08.843" Title="xinput trackpad settings" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8028" PostTypeId="2" ParentId="8025" CreationDate="2016-09-20T12:59:09.483" Score="0" Body="&lt;p&gt;I had a similar problem on ubuntu.  Does ctrl-alt-f2 then ctrl-alt-f7 bring it back quicker than a reboot?  Sorry i don't have a permanent fix.&lt;/p&gt;&#xA;" OwnerUserId="6472" LastActivityDate="2016-09-20T12:59:09.483" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8031" PostTypeId="1" CreationDate="2016-09-20T16:26:58.653" Score="1" ViewCount="124" Body="&lt;p&gt;I stack with the problem with mono app written on GTK#. I try to change org.gnome.desktop.interface buttons-have-icons to true which solve this problem in Freya, but it didn't solve problem in Loki. Is there are any other ways to solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="6409" LastActivityDate="2016-09-20T16:26:58.653" Title="No icons on buttons on GTK# apps" Tags="|release-loki|gtk|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8033" PostTypeId="2" ParentId="1919" CreationDate="2016-09-20T16:39:04.570" Score="6" Body="&lt;p&gt;It seems that as of now, elementary designs hot-corners to work like wingpanel and the dock and show them only on the primary display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1385296&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1385296&lt;/a&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1080283&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/gala/+bug/1080283&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-20T16:39:04.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8034" PostTypeId="2" ParentId="7909" CreationDate="2016-09-20T18:00:16.800" Score="4" Body="&lt;p&gt;I found a temporarily solution until a fix is released, First connect the &lt;code&gt;usb dongle&lt;/code&gt; and wait till it get detected in &lt;code&gt;Disks&lt;/code&gt;. Then move on to the &lt;code&gt;Settings-&amp;gt;Network&lt;/code&gt; navigate to the &lt;code&gt;Ethernet&lt;/code&gt; under the devices in the left panel (as shown in the above screen-shot), then  press &lt;code&gt;Edit Connections&lt;/code&gt; then &lt;code&gt;Add&lt;/code&gt; select &lt;code&gt;mobile broadband&lt;/code&gt; from the &lt;code&gt;hardware menu&lt;/code&gt;. Then  go on by filling fields, Once the&lt;code&gt;Editing &amp;lt;yourConnectionName&amp;gt;&lt;/code&gt; window appears, move on to the &lt;code&gt;General&lt;/code&gt; tab and mark &lt;code&gt;Automatically connect to this network when available&lt;/code&gt;. This will automatically connect the &lt;code&gt;usb dongle&lt;/code&gt; when it is plugged in. This works fine and is a temporarily solution until a fix is being released as OS update.&lt;/p&gt;&#xA;" OwnerUserId="3955" LastActivityDate="2016-09-20T18:00:16.800" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8035" PostTypeId="2" ParentId="8012" CreationDate="2016-09-20T18:44:58.400" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;Go to 'System Settings' &lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select 'Power' &lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Unlock administrator rights &lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Look down and you'll see &quot;When lid is closed:&quot; &lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose from menu to the right &quot;Do nothing&quot; &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6360" LastActivityDate="2016-09-20T18:44:58.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8036" PostTypeId="2" ParentId="8015" CreationDate="2016-09-20T19:26:48.543" Score="0" Body="&lt;p&gt;You could install a tweak: &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks#elementary-tweaks&quot; rel=&quot;nofollow&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks#elementary-tweaks&lt;/a&gt; &lt;br&gt;&#xA;'Tweaks' appears in 'System settings' &lt;br&gt;&#xA;Or you could use dconf-editor to directly change values&lt;/p&gt;&#xA;" OwnerUserId="6360" LastEditorUserId="6360" LastEditDate="2016-09-20T19:39:31.327" LastActivityDate="2016-09-20T19:39:31.327" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8038" PostTypeId="2" ParentId="8027" CreationDate="2016-09-20T20:13:08.843" Score="1" Body="&lt;p&gt;I'm not sure why 299 is accepted but 300 isn't, but I think I can answer the second part of your question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To set the value at startup, try adding the command to &lt;code&gt;~/.bash_profile&lt;/code&gt; (create the file if it doesn't exist). Then, log out and log back in. This file is executed each time you log in. See &lt;a href=&quot;http://www.joshstaiger.org/archives/2005/07/bash_profile_vs.html&quot; rel=&quot;nofollow&quot;&gt;.bash_profile vs .bashrc&lt;/a&gt; for more details.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-20T20:13:08.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8039" PostTypeId="2" ParentId="7851" CreationDate="2016-09-20T20:15:18.537" Score="3" Body="&lt;p&gt;Running the following command in the terminal could solve this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xmodmap -e &quot;pointer = 1 25 3 4 5 6 7 8 9&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To make this persistent, edit your ~/.Xmodmap with a text editor either from the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano ~/.Xmodmap&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or with a graphical text editor:    &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;open files --&gt; go to your home directory --&gt; open .Xmodmap (a hidden&#xA;  file) with a right click in &quot;Scratch&quot; or another text editor. If the&#xA;  file doesn't exist, create a new file with the name .Xmodmap&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and add this line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pointer = 1 25 3 4 5 6 7 8 9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="627" LastEditorUserId="627" LastEditDate="2016-09-20T20:27:12.293" LastActivityDate="2016-09-20T20:27:12.293" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8040" PostTypeId="1" CreationDate="2016-09-20T20:28:44.290" Score="0" ViewCount="1474" Body="&lt;p&gt;I wonder if may be possible to create a launcher in plank, with the program icon itself, to run the setting manager. Might it be possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now, only way to access settings in typing in a terminal &#xA;&lt;code&gt;plank --preferences&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, once hovering the mouse cursor over that dock, pressing ctrl + right mouse click. A launcher would simplyfy this.&lt;/p&gt;&#xA;" OwnerUserId="6476" LastEditorUserId="6476" LastEditDate="2016-09-24T12:33:50.297" LastActivityDate="2016-10-09T10:29:39.290" Title="Have settings launcher in plank? (preferibly by default)" Tags="|system|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8041" PostTypeId="1" AcceptedAnswerId="8049" CreationDate="2016-09-20T20:39:17.077" Score="1" ViewCount="1629" Body="&lt;p&gt;When freya was released I dualbooted it with Win10. I used &lt;a href=&quot;https://www.youtube.com/watch?v=JXyzgd3NQ_8&quot; rel=&quot;nofollow&quot;&gt;this link&lt;/a&gt; to add Korean input. Recently I had problems with EFI and booting so I decided to back up all important files and formatted my hard drive and reinstalled with Loki 0.4. Everything has been working great but the instructions in the video don't work anymore. I installed ibus-hangul and dconf editor, added the &quot; [('ibus', 'hangul')] and tried to add Korean input but I can only type in English regardless of what keyboard I'm using. You can probably tell but I'm a noob. Can anyone help me? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="6488" LastActivityDate="2017-04-08T19:49:16.327" Title="Adding Korean Input for Loki" Tags="|release-loki|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8044" PostTypeId="1" CreationDate="2016-09-20T21:44:58.303" Score="2" ViewCount="652" Body="&lt;p&gt;When I installed doth HDDs were recognised but elementary only gave the option to put things on one. I chose my SSD. It insisted on putting the swap file there too. Can I get access to the other drive now and move my swapfile? How do I do that?  &lt;/p&gt;&#xA;" OwnerUserId="6490" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:58.303" LastActivityDate="2018-05-15T12:30:58.303" Title="How do I move my swap file to another disk?" Tags="|release-freya|swap|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8045" PostTypeId="1" CreationDate="2016-09-20T22:00:08.880" Score="3" ViewCount="124" Body="&lt;p&gt;Is it possible to hide minimized windows from overview or multitasking view in Loki? I have a lot of web apps and messengers in minimized state, and they make it hard to find the window I need right now.&lt;/p&gt;&#xA;" OwnerUserId="6491" LastEditorUserId="578" LastEditDate="2016-11-21T09:06:08.787" LastActivityDate="2016-11-21T09:06:08.787" Title="Don't show minimized windows in overview" Tags="|release-loki|pantheon|multitasking-view|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8046" PostTypeId="2" ParentId="8044" CreationDate="2016-09-20T22:10:54.960" Score="-1" Body="&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/SwapFaq&quot; rel=&quot;nofollow&quot;&gt;https://help.ubuntu.com/community/SwapFaq&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should basically have all the information you'll need.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically make a swap partition(or file) on the second drive and then configure swapon to use it.&lt;/p&gt;&#xA;" OwnerUserId="6368" LastActivityDate="2016-09-20T22:10:54.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8047" PostTypeId="2" ParentId="8040" CreationDate="2016-09-20T22:15:22.077" Score="0" Body="&lt;p&gt;It's a little hard to find a spot but if you can right click on an empty spot on plank and select preferences.  The easiest spot I found is like right on the border of the right side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you could create a bash script and simply drag it onto plank I guess but how often do you really need to edit it?&lt;/p&gt;&#xA;" OwnerUserId="6368" LastActivityDate="2016-09-20T22:15:22.077" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8048" PostTypeId="2" ParentId="7267" CreationDate="2016-09-20T22:54:56.797" Score="1" Body="&lt;p&gt;I have been researching about your problem and finally found a plausible explanation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;A package only gets updates if it is installed, so if the languages are updated, they must be installed somehow. &#xA;To manage installed packages in a detailed way, Synaptic is a convenient tool. &#xA;You can install Synaptic from the Software Center (or by the command sudo apt-get install synaptic). &#xA;Then, in Synaptic, search for the packages and remove them if you are sure you don't need them.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/556101/how-to-prevent-unnecessary-updates/556149#556149&quot;&gt;https://askubuntu.com/questions/556101/how-to-prevent-unnecessary-updates/556149#556149&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-20T22:54:56.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8049" PostTypeId="2" ParentId="8041" CreationDate="2016-09-20T23:14:43.590" Score="3" Body="&lt;p&gt;In Loki, nimf is perfect for Korean Input Method.&#xA;1) $ sudo apt install nimf&#xA;2) $ im-config -n nimf&#xA;3) Log out &amp;amp; Log in&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, you need to go nimf-settings on the wingpanel or &#xA;run this command in terminal&#xA;$ nimf-settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;deactivate those two button &quot;anthy&quot; and &quot;sunpinyin&quot; for input method unless you are using Japanese , and Chinese&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rYPhC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rYPhC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and now you need to set Key combination follow by your behaviour&#xA;in &quot;libhangul&quot;, it is set Hagnul &amp;amp; Hanja key as default key to input Korean &amp;amp; Chinese character for Korean,&#xA;I usually use Hangul with Shift + Space for Hangul&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9mz3M.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9mz3M.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work for you , try to change your keyboard layout to Korean or Korean (101/104)&lt;/p&gt;&#xA;" OwnerUserId="355" LastEditorUserId="355" LastEditDate="2016-09-21T00:30:45.600" LastActivityDate="2016-09-21T00:30:45.600" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8050" PostTypeId="1" CreationDate="2016-09-20T23:26:44.710" Score="0" ViewCount="525" Body="&lt;p&gt;I have tried everything to disable the touchpad on my Dell laptop. Is there a way to do it?&lt;/p&gt;&#xA;" OwnerUserId="6492" LastEditorUserId="26" LastEditDate="2016-09-25T15:55:36.367" LastActivityDate="2016-09-25T15:55:36.367" Title="How do I disable the touchpad in elementary OS?" Tags="|release-loki|touchpad|" AnswerCount="1" CommentCount="0" ClosedDate="2016-09-25T16:22:06.983" ContentLicense="CC BY-SA 3.0" />
  <row Id="8051" PostTypeId="2" ParentId="7576" CreationDate="2016-09-21T06:14:49.583" Score="1" Body="&lt;p&gt;You might want to use &lt;a href=&quot;https://wiki.ubuntu.com/X/Config/Resolution#Adding%20undetected%20resolutions&quot; rel=&quot;nofollow&quot;&gt;xrandr&lt;/a&gt; to define the monitor resolution.&#xA;That's what I did for my second monitor (using an Intel card and not Nvidia).&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2016-09-21T06:14:49.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8052" PostTypeId="1" CreationDate="2016-09-21T06:44:14.790" Score="3" ViewCount="529" Body="&lt;p&gt;I have installed elementary OS Loki. I cannot find the option which allows me to have different keyboard layouts for different windows. Will this option be enabled or how to figure out with it?&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6495" LastEditorUserId="26" LastEditDate="2016-09-25T16:58:04.947" LastActivityDate="2016-09-25T19:31:46.523" Title="Keyboard layout for single window" Tags="|release-loki|keyboard|keyboard-layout|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-19T01:54:04.933" ContentLicense="CC BY-SA 3.0" />
  <row Id="8053" PostTypeId="2" ParentId="8040" CreationDate="2016-09-21T06:52:09.017" Score="0" Body="&lt;p&gt;Thanks I know, another way may be to open the settings file in the current dock config: &lt;br/&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/home/user.config/plank/dock1/settings&lt;/code&gt; &lt;br/&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and editing the following line:&lt;br/&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#Whether to show the item for the dock itself. &#xA;ShowDockItem=false&lt;/code&gt;&#xA;&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;changing the parameter &lt;code&gt;false&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;, but it do not work!  Maybe it's that particular version of plank used by eOS,but I don't see wht it's so hard to implement it :/ &lt;br &gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS:  i've read somewhere that the official name is Pantheon Dock, is that true?&lt;/p&gt;&#xA;" OwnerUserId="6476" LastActivityDate="2016-09-21T06:52:09.017" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8054" PostTypeId="2" ParentId="8015" CreationDate="2016-09-21T06:56:18.890" Score="4" Body="&lt;p&gt;You have to go in the &quot;Appearance&quot; section of elementary tweaks, and look for the swithc next to &quot;prefer dark theme&quot;.&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've used it but some icons (eg. in scratch) hare hardly seeable, so i go for the default theme. i've tryed also some gtk3 themes from gnomelook.org but mostly are not fully compatible with eOS, the desktop will be messed up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Sry, to better answer you question; the easiest way to install a dark theme (and themes in generale) is to create a hidden folder in your home named &lt;code&gt;.themes&lt;/code&gt; (too actually see it in &lt;em&gt;files&lt;/em&gt; you have to press ctrl +h) and unzip theme folder(s) in there.&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you have to download GTK3 themes, good sources are Deviantart and gnome look.org, but as i wrote before there are still a few themes fully compatible with eOS. The old and outdated elementary os update PPA had some however:&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6476" LastEditorUserId="6476" LastEditDate="2016-09-21T08:19:06.470" LastActivityDate="2016-09-21T08:19:06.470" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8055" PostTypeId="1" CreationDate="2016-09-21T08:43:23.943" Score="6" ViewCount="11647" Body="&lt;p&gt;It is possible to do that 0.4 Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In previous versions of elementary OS (Luna and Freya) I remember it was possible; in the current version it seems not. At least in the &lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary update PPA&lt;/a&gt; there were a couple of packages to install &quot;super wingpanel&quot; and &quot;wingpanel slim&quot;, modified versions of the &quot;vanilla&quot; one so users were offered with more variety. Any hints?&lt;/p&gt;&#xA;" OwnerUserId="6476" LastEditorUserId="84" LastEditDate="2016-11-11T10:55:23.340" LastActivityDate="2016-11-11T10:55:23.340" Title="How to customize wingpanel in elementary OS 0.4 Loki?" Tags="|wingpanel|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8056" PostTypeId="1" CreationDate="2016-09-21T09:13:42.197" Score="1" ViewCount="124" Body="&lt;p&gt;Since Loki was released i have problems updating Freya....I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-amd64/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;Failed to fetch http://archive.canonical.com/dists/freya/partner/binary-i386/Packages  404  Not Found [IP: 91.189.92.150 80]&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3141" LastEditorUserId="26" LastEditDate="2016-11-22T13:03:34.853" LastActivityDate="2016-11-22T13:03:34.853" Title="Cant update Freya 64 bit" Tags="|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8058" PostTypeId="2" ParentId="7907" CreationDate="2016-09-21T09:38:12.733" Score="1" Body="&lt;p&gt;There is no way to &quot;install&quot; a &lt;code&gt;tar.gz&lt;/code&gt; file or &lt;code&gt;tar.bz&lt;/code&gt; file - these files are simply compressed archives (the equivalent of a .zip file on Windows). What I normally do with these is run &lt;code&gt;tar xvf file.tar.gz&lt;/code&gt; and a new directory exists with all the contents of the zip file. I'll then &lt;code&gt;sudo mv folder /opt/&lt;/code&gt; to move the contents to the /opt/ directory. Once it's there, I'll take a look inside and find either a shell script which launches the app such as &lt;code&gt;start.sh&lt;/code&gt; or the main binary file (in the example of Skype, there is one named &lt;code&gt;skype&lt;/code&gt;. It helps to look inside a bin folder, if one exists. Once you've done this, you can add a &lt;code&gt;.desktop&lt;/code&gt; file which will add it to the application launcher by running &lt;code&gt;sudo touch /usr/share/applications/program.desktop&lt;/code&gt; and using the instructions on the &lt;a href=&quot;https://help.ubuntu.com/community/UnityLaunchersAndDesktopFiles&quot; rel=&quot;nofollow&quot;&gt;Ubuntu website&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regarding other applications, you can use &lt;code&gt;apt-cache search appname&lt;/code&gt; in the terminal to try find applications in the Ubuntu repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This method can be a bit long and winded, sorry about that, but it works reliably and it offers a much wider array of software than the software center itself does.&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2016-09-21T09:38:12.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8059" PostTypeId="1" AcceptedAnswerId="8066" CreationDate="2016-09-21T10:44:33.280" Score="2" ViewCount="1489" Body="&lt;p&gt;On Loki &lt;strong&gt;Steam&lt;/strong&gt; have no system tray icon. How to solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="6409" LastActivityDate="2016-09-21T13:28:44.937" Title="No system tray icon of Steam" Tags="|release-loki|steam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8060" PostTypeId="1" CreationDate="2016-09-21T10:57:13.810" Score="2" ViewCount="17728" Body="&lt;p&gt;As far as i know, there are no tools or ways to upgrade to a new relase, am i right? If not, does the typyng in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;leads to a version upgrade, once a new one is relased? Or mperaphs if users do regularly install updates the will have it?&lt;/p&gt;&#xA;" OwnerUserId="6476" LastActivityDate="2016-09-21T14:21:55.983" Title="How to upgrade to a newer version of elementary os?" Tags="|system|updates|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-21T15:15:57.297" ContentLicense="CC BY-SA 3.0" />
  <row Id="8062" PostTypeId="1" CreationDate="2016-09-21T11:18:34.690" Score="0" ViewCount="42" Body="&lt;p&gt;I'm developing extension for wingpanel-indicator-power which allows you to change the screen brightness directory from the indicator.&lt;br&gt;&#xA;The the moment this is only possible by accessing the power options from switchboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now it is working quite well.&lt;br&gt;&#xA;But at the moment, this extension is displayed all the time, even if you are using a desktop computer, where it is not possible to change the brightness.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to check if user is using a notebook and only display the brightness-slider, if it is not a desktop computer. &lt;/p&gt;&#xA;" OwnerUserId="6499" LastActivityDate="2016-09-21T18:54:21.953" Title="Determine if Notebook or Desktop in Vala" Tags="|development|vala|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8063" PostTypeId="1" CreationDate="2016-09-21T11:22:45.747" Score="2" ViewCount="1769" Body="&lt;p&gt;I recently bought an Asus Zenbook UX305UA and installed my favorite operating system version 0.4. Most things work out of the box. However, I ran into a few issues which are hardware-related, but seem to be resolved in newer versions of the kernel, these are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/310641/usb-devices-not-recognized-when-laptop-runs-on-battery&quot;&gt;USB devices are not recognized in battery mode&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Brightness control keys (Fn + F5/F6) don't work&lt;/li&gt;&#xA;&lt;li&gt;Airplane mode key (Fn + F2) doesn't work&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have found how-tos on updating the kernel, but I have also read that one shouldn't do it if he has no clue about it (i.e. my situation). Others wrote about kernel fixes being backported, so how can I check for these backports and are they fetched automatically or where can I get them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would relly love to stick with elementary, but I think I couldn't live with these issues, especially the USB device thing. So can someone tell me whether I can expect an automatic kernel update / backport or provide some advice on how to savely update the kernel myself? I would greatly appreciate it!&lt;/p&gt;&#xA;" OwnerUserId="6463" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-09-21T20:54:20.313" Title="How to update the kernel in eOS 0.4 Loki to solve hardware-related issues?" Tags="|release-loki|updates|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8064" PostTypeId="2" ParentId="8059" CreationDate="2016-09-21T12:12:05.540" Score="0" Body="&lt;p&gt;There was a simple solution in Freya, it dates back in 2013, if someone ma want to check the article is &lt;a href=&quot;http://elementarytips.blogspot.it/2013/05/steam-icons-for-elementary-os.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6476" LastActivityDate="2016-09-21T12:12:05.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8065" PostTypeId="1" AcceptedAnswerId="8082" CreationDate="2016-09-21T12:55:28.100" Score="2" ViewCount="864" Body="&lt;p&gt;I tried to install Synapse on Loki editing the ppa, installed the required libgee2 and libgranite, but all I get was to broke the wingpanel.&#xA;Any solution to have a nice search engine on Elementary Loki?&lt;/p&gt;&#xA;" OwnerUserId="6502" LastActivityDate="2016-09-21T21:14:34.437" Title="Synapse on Loki" Tags="|release-loki|wingpanel|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8066" PostTypeId="2" ParentId="8059" CreationDate="2016-09-21T13:28:44.937" Score="5" Body="&lt;p&gt;Remove steam from /etc/wingpanel.d/ayatana.blacklist&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-09-21T13:28:44.937" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8067" PostTypeId="1" CreationDate="2016-09-21T13:53:33.350" Score="1" ViewCount="550" Body="&lt;p&gt;I can't install gazette the weather widget. I tried this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gotwig/weekly&#xA;sudo apt update&#xA;sudo apt install gazette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The first and second commands worked but the third command shows this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Unable to locate package gazette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6504" LastEditorUserId="26" LastEditDate="2016-09-25T16:53:59.393" LastActivityDate="2016-09-26T15:34:22.427" Title="How can I install gazette in elementary OS 0.4 Loki?" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8071" PostTypeId="2" ParentId="8060" CreationDate="2016-09-21T14:20:04.240" Score="1" Body="&lt;p&gt;All OS internal updates will now be pushed by the new AppCenter introduced in Loki. However, to upgrade from one version of elementary OS to another you would have to do a clean install of the newer version. As in future, OTA updates might be possible, so no you can't use &lt;code&gt;sudo apt dist-upgrade&lt;/code&gt; to update to a newer OS version.&lt;/p&gt;&#xA;" OwnerUserId="6001" LastActivityDate="2016-09-21T14:20:04.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8072" PostTypeId="2" ParentId="8060" CreationDate="2016-09-21T14:21:55.983" Score="2" Body="&lt;p&gt;&lt;code&gt;apt dist-upgrade&lt;/code&gt; does not upgrade your system to a different release, rather it upgrades existing packages, and installs any new dependencies which may be required by these packages. See my answer &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7496/5722&quot;&gt;here&lt;/a&gt; if you want a more detailed explanation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;do-release-upgrade&lt;/code&gt; is used to upgrade to a new OS release on Ubuntu, however &lt;strong&gt;this does not work on elementary&lt;/strong&gt;. Instead, elementary currently requires a clean install each time you move between major OS versions (e.g. Freya to Loki).&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-21T14:21:55.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8074" PostTypeId="1" CreationDate="2016-09-21T15:52:42.893" Score="1" ViewCount="1383" Body="&lt;p&gt;I have been trying to setup Japanese input on elementary. After many hours of Googling around and installing and uninstalling packages I have made it work with IBus and the Anthy input method. The way I made it work was by installing anthy and Ibus and then running &lt;code&gt;im-config&lt;/code&gt; and selecting IBus as the input method. Unfortunately, once I do this I can no longer type at all on Slingshot. Everything except Slingshot seems fine thus far. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried setting things up with fcitx but to get that working I had to remove IBus completely which seemed to eliminate some important packages, some stuff related to System Settings, so I decided not to use that method. Plus fcitx added a new icon on the wingpanel which is quite ugly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, with both IBus and fcitx, mozc didn't work, which works alright on Ubuntu 16.04. This is bad because I prefor mozc to Anthy. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really want to use Elementary, but I need Japanese input to work and I can not get a satisfactory setup working. &lt;/p&gt;&#xA;" OwnerUserId="6506" LastActivityDate="2016-09-28T14:12:18.940" Title="How to get Japanese input working on Loki?" Tags="|release-loki|ibus|fcitx|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8076" PostTypeId="2" ParentId="8074" CreationDate="2016-09-21T16:49:21.190" Score="1" Body="&lt;p&gt;I just installed nimf for Korean input and it works like a charm. I don't use Japanese but nimf does support Japanese with anthy so give it a try! First install nimf with sudo apt-get install nimf , then run im-config -n nimf , then reboot. Next, run nimf-settings and set up your hotkey to switch input methods. Reboot again and it should work! Just remember that you might need to install gnome-language-selector ( sudo apt-get install gnome-language-selector ) and switch the Japanese input to nimf since ibus is already installed. Hope it works! :)&lt;/p&gt;&#xA;" OwnerUserId="6488" LastActivityDate="2016-09-21T16:49:21.190" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8077" PostTypeId="2" ParentId="7918" CreationDate="2016-09-21T18:53:14.703" Score="1" Body="&lt;p&gt;Found the solution!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntuusers.de/Canon_UFRII/UFRII_LT_Druckertreiber/&quot; rel=&quot;nofollow&quot;&gt;https://wiki.ubuntuusers.de/Canon_UFRII/UFRII_LT_Druckertreiber/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was the line, that solves the printing problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lib32stdc++6  libxml2:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6317" LastActivityDate="2016-09-21T18:53:14.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8078" PostTypeId="2" ParentId="8062" CreationDate="2016-09-21T18:54:21.953" Score="1" Body="&lt;p&gt;What makes you think it's not possible to adjust brightness on a desktop?  It may not be possible on &lt;em&gt;your&lt;/em&gt; desktop, but that doesn't mean it isn't possible on someone else's…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You're also going to run into the problem of how you define a laptop vs. desktop (and, to take it further, a tablet).  It's common to find laptop parts in desktop computers, especially all-in-one machines, NUCs, etc.  The best thing I can think of is checking to see if &lt;code&gt;/sys/class/power_supply/BAT*&lt;/code&gt; exists, but I think connecting a UPS to a desktop computer would populate that…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I were you I would try to take a look at the API you're using to set the display brightness to see if it provides a way to check whether the display actually supports it.  If so, it would probably be best to use that instead.&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2016-09-21T18:54:21.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8079" PostTypeId="1" AcceptedAnswerId="8998" CreationDate="2016-09-21T19:20:58.437" Score="1" ViewCount="2406" Body="&lt;p&gt;I am currently using elementary OS 0.4 Loki (64-bit) and I accidentally changed volume down (default: &lt;em&gt;&amp;lt; fn&gt;F12&lt;/em&gt;).&#xA;Now I can't change it back. Then I noticed that all shortcuts with &lt;em&gt;&amp;lt; fn&gt;&lt;/em&gt; are set/lebeled with  which is not true. All other shortcuts are working fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the question is how to reset it or change it back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot.&lt;/p&gt;&#xA;" OwnerUserId="6508" LastActivityDate="2016-11-01T15:47:24.220" Title="System Settings &gt; Keyboard &gt; Shortcuts [ &lt;fn&gt; shortcut not working ]" Tags="|release-loki|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8080" PostTypeId="2" ParentId="8067" CreationDate="2016-09-21T20:27:52.103" Score="0" Body="&lt;p&gt;You can check the ppa first to see which packages includes using synaptic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Detailed instructions here:&#xA;HOW TO LIST PACKAGES FROM A PPA / REPOSITORY IN UBUNTU&#xA;Source: &#xA;&lt;a href=&quot;http://www.webupd8.org/2012/12/how-to-list-packages-from-ppa.html?m=1&quot; rel=&quot;nofollow&quot;&gt;http://www.webupd8.org/2012/12/how-to-list-packages-from-ppa.html?m=1&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-09-25T19:47:48.960" LastActivityDate="2016-09-25T19:47:48.960" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8081" PostTypeId="2" ParentId="8063" CreationDate="2016-09-21T20:54:20.313" Score="2" Body="&lt;p&gt;Kernel updates are included through updates to the Ubuntu base. Loki is based on Ubuntu 16.04, which will get updates every 6 months for the next 5 years. (See the &lt;a href=&quot;https://wiki.ubuntu.com/Releases&quot; rel=&quot;nofollow&quot;&gt;Ubuntu releases page&lt;/a&gt; for more details).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last release was in July, so I'd expect the next one to arrive in January 2017.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-21T20:54:20.313" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8082" PostTypeId="2" ParentId="8065" CreationDate="2016-09-21T21:14:34.437" Score="3" Body="&lt;p&gt;you can try &lt;strong&gt;Albert&lt;/strong&gt;&#xA;it's an alternative to synapse&lt;/p&gt;&#xA;" OwnerUserId="6511" LastActivityDate="2016-09-21T21:14:34.437" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8084" PostTypeId="2" ParentId="7730" CreationDate="2016-09-21T22:32:58.520" Score="3" Body="&lt;p&gt;You can delete the entire database in ~/.local/share/noise/ &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Noise will then re-scan everything. This is not an ideal solution, an option would be great.&lt;/p&gt;&#xA;" OwnerUserId="6290" LastActivityDate="2016-09-21T22:32:58.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8085" PostTypeId="1" CreationDate="2016-09-21T22:52:57.503" Score="1" ViewCount="466" Body="&lt;p&gt;I just installed loki, but sometimes the background image becomes black or strange. When I change the background image the problem is fixed. however it is annoying&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GPU: nvidia queadro k620 (driver from nvidia webpage installed (367.44) )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;CPU:  Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;RAM: 32 GB&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ug2fu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ug2fu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x1fq6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x1fq6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6512" LastActivityDate="2016-09-21T22:52:57.503" Title="Problem with desktop image background (visually)" Tags="|release-loki|desktop|nvidia|" AnswerCount="0" CommentCount="0" ClosedDate="2018-02-12T09:59:57.937" ContentLicense="CC BY-SA 3.0" />
  <row Id="8086" PostTypeId="1" CreationDate="2016-09-21T22:58:34.200" Score="1" ViewCount="81" Body="&lt;p&gt;When you use new Loki's Menu to control Spotify, and click on the spotify song, a new window opens each time you click instead of bringing the existing window to the foreground. &#xA;see here:   &lt;a href=&quot;https://i.imgur.com/RBYDbee.gifv&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://i.imgur.com/RBYDbee.gifv&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2341" LastActivityDate="2016-11-02T04:10:19.440" Title="Spotify opens a new window when you click on the sound tray menu [Loki]" Tags="|release-loki|sound|wingpanel|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8087" PostTypeId="2" ParentId="7906" CreationDate="2016-09-21T23:30:01.317" Score="5" Body="&lt;p&gt;It is a known issue, it's reported and confirmed here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1587975&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/appcenter/+bug/1587975&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm still waiting for an fix or update myself.&lt;/p&gt;&#xA;" OwnerUserId="6513" LastActivityDate="2016-09-21T23:30:01.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8088" PostTypeId="2" ParentId="7939" CreationDate="2016-09-22T03:04:51.513" Score="0" Body="&lt;p&gt;&lt;em&gt;This answer applies only to Loki&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't think it is possible.  It appears that the touchpad driver used is now libinput and according to this post:&#xA;&lt;a href=&quot;https://wayland.freedesktop.org/libinput/doc/latest/scrolling.html&quot; rel=&quot;nofollow&quot;&gt;https://wayland.freedesktop.org/libinput/doc/latest/scrolling.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It does not differentiate between horizontal and vertical scrolling.  Someone can chime in and correct me if i'm wrong.  I'd love to have a way to disable it too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also mentioned in this post regarding Ubuntu with Gnome:&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2321626&quot; rel=&quot;nofollow&quot;&gt;https://ubuntuforums.org/showthread.php?t=2321626&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="2556" LastEditDate="2016-09-22T05:01:51.543" LastActivityDate="2016-09-22T05:01:51.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8089" PostTypeId="2" ParentId="8074" CreationDate="2016-09-22T03:35:27.447" Score="0" Body="&lt;p&gt;I was able to get mozc with fcitx working by following &lt;a href=&quot;http://balloon-aka-fu-sen.tumblr.com/post/150211222217/elementary-os-040-loki&quot; rel=&quot;nofollow&quot;&gt;this article&lt;/a&gt; which is in Japanese, but it is quite easy to follow, specially with the commands and the screenshots. &lt;/p&gt;&#xA;" OwnerUserId="6506" LastEditorUserId="6506" LastEditDate="2016-09-28T14:12:18.940" LastActivityDate="2016-09-28T14:12:18.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8090" PostTypeId="2" ParentId="7349" CreationDate="2016-09-22T04:49:12.507" Score="3" Body="&lt;p&gt;On elementary OS Loki you can't disable the touchpad from System Settings, you have to install &lt;code&gt;dconf-editor&lt;/code&gt;, open it and go to &lt;code&gt;org-&amp;gt;gnome-&amp;gt;desktop-&amp;gt;peripherals-&amp;gt;touchpad&lt;/code&gt; there on &lt;code&gt;send-events&lt;/code&gt; select &lt;code&gt;disable&lt;/code&gt; or &lt;code&gt;disable-on-external-mouse&lt;/code&gt;, with that you disable the touchpad.&lt;/p&gt;&#xA;" OwnerUserId="6515" LastEditorUserId="26" LastEditDate="2016-09-25T16:10:31.443" LastActivityDate="2016-09-25T16:10:31.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8091" PostTypeId="2" ParentId="7939" CreationDate="2016-09-22T04:54:59.243" Score="3" Body="&lt;p&gt;&lt;em&gt;This answer applies only to Loki&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Okay, so I might have just proven myself wrong.  I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This removes libinput touchpad driver.  Then install synaptics:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart.  In terminal type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient HorizTwoFingerScroll=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This disables two finger horizontal scroll.  Can also add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient PalmDetect=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for palm detection.  Changes do not seem to persist across reboots so you might have to create a custom command on startup for each of these.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested this extensively, but seems to work so far, use at your own risk.  You could always remove the synaptics packages and reinstall the libinput ones if needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="2556" LastEditDate="2016-10-20T10:28:40.267" LastActivityDate="2016-10-20T10:28:40.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8092" PostTypeId="2" ParentId="7686" CreationDate="2016-09-22T05:13:54.720" Score="3" Body="&lt;p&gt;I just posted a solution for another question that might help you for this as well on:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7939/way-to-enable-vertical-two-finger-scrolling-but-not-horizontal/8088#8088&quot;&gt;Way to enable vertical two-finger scrolling, but not horizontal?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I removed the libinput drivers for the touchpad and installed the synaptic drivers instead I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This removes libinput touchpad driver. Then install synaptics: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This also allowed me to change Two Finger Horizontal scrolling and add palm detection (see above link) and also made the touchpad less sensitive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested this extensively, but seems to work so far, use at your own risk. You could always remove the synaptics packages and reinstall the libinput ones if needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-20T10:29:29.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8094" PostTypeId="2" ParentId="7990" CreationDate="2016-09-22T06:59:53.370" Score="2" Body="&lt;p&gt;I can confirm, OwnClound via CalDAV, event in the right panel for today not shown, but if you select the next day, event from day before are there. There is a 1 day shift&lt;/p&gt;&#xA;" OwnerUserId="6517" LastActivityDate="2016-09-22T06:59:53.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8095" PostTypeId="1" CreationDate="2016-09-22T07:04:17.073" Score="11" ViewCount="14789" Body="&lt;p&gt;How to automatically hide wingpanel in elementary OS 0.4 Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mfHYj.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mfHYj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6500" LastEditorUserId="26" LastEditDate="2016-09-25T16:02:40.803" LastActivityDate="2021-10-23T08:41:35.767" Title="How to automatically hide wingpanel?" Tags="|release-loki|" AnswerCount="7" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8096" PostTypeId="2" ParentId="8095" CreationDate="2016-09-22T07:42:19.450" Score="3" Body="&lt;p&gt;This is not possible with wingpanel.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-09-22T07:42:19.450" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8097" PostTypeId="2" ParentId="8095" CreationDate="2016-09-22T13:26:19.257" Score="7" Body="&lt;p&gt;elementary has a full screen mode that might get close to what you're looking for. It's disabled by default, but you can enable it by going into the Settings app, editing keyboard shortcuts, and assigning a key to fullscreen mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7mSHd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7mSHd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In full screen mode, the top bar and plank aren't shown, and &lt;strong&gt;each fullscreen app gets its own workspace&lt;/strong&gt; (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt; to cycle those). &lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorDisplayName="user170" LastEditDate="2017-01-23T13:48:10.487" LastActivityDate="2017-01-23T13:48:10.487" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8098" PostTypeId="1" CreationDate="2016-09-22T14:02:50.870" Score="-1" ViewCount="77" Body="&lt;p&gt;How to fix this?&#xA;Only the titles are visible, no options..&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nOIDU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nOIDU.png&quot; alt=&quot;Look at the warning popup&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/X9MtH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X9MtH.png&quot; alt=&quot;only title is visible&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6523" LastEditorUserId="26" LastEditDate="2016-09-25T16:12:06.533" LastActivityDate="2016-09-25T16:12:06.533" Title="Small windows can't be resized (look pics for clarification)" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-25T16:12:54.277" ContentLicense="CC BY-SA 3.0" />
  <row Id="8100" PostTypeId="1" AcceptedAnswerId="8101" CreationDate="2016-09-22T15:39:22.983" Score="2" ViewCount="437" Body="&lt;p&gt;In elementary OS 0.4 Loki the compose key work in the stock applications but not in the Qt/KDE ones (such as Anki). Is there a way so that the input method configured in &lt;em&gt;System Settings&lt;/em&gt; can be used in Qt/KDE apps as well?&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="26" LastEditDate="2016-09-25T15:53:09.347" LastActivityDate="2016-09-25T15:53:09.347" Title="How to use the compose key in Qt apps?" Tags="|keyboard|input|qt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8101" PostTypeId="2" ParentId="8100" CreationDate="2016-09-22T15:39:22.983" Score="3" Body="&lt;p&gt;You have to install the package &lt;code&gt;ibus-qt4&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-22T15:39:22.983" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8102" PostTypeId="2" ParentId="7301" CreationDate="2016-09-22T15:53:29.130" Score="1" Body="&lt;p&gt;The answer to this question is &lt;em&gt;it depends&lt;/em&gt;. If you are running Loki, the kernel isn't all that old.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Provided you aren't using anything &lt;em&gt;really&lt;/em&gt; exotic, Linux typically supports most desktop hardware. I can't remember the last time I had an issue running Linux on a desktop machine - normally issues arise when trying to get it to run on a laptop, where there is poorer support for some chipsets (wireless etc.).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A better way to do this is to use something like &lt;a href=&quot;http://pcpartpicker.com/&quot; rel=&quot;nofollow&quot;&gt;PCPartPicker&lt;/a&gt; to assemble a potential build which suits your needs, and then post to the &lt;a href=&quot;https://www.reddit.com/r/elementaryos&quot; rel=&quot;nofollow&quot;&gt;elementary OS subreddit&lt;/a&gt; to ask whether your hardware is supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some things you might want to avoid:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;32-bit UEFI firmware&lt;/li&gt;&#xA;&lt;li&gt;Older AMD graphics cards&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-22T15:53:29.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8103" PostTypeId="1" CreationDate="2016-09-22T16:13:28.353" Score="1" ViewCount="992" Body="&lt;p&gt;Greetings to all experienced elementary OS users. Just a question from a noob - how do I make elementary OS persistent on my USB drive? Here are some things I tried (and failed):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Installing elementary OS onto another USB drive (from a USB drive running on live mode) - when booting into the installed USB drive, I got a missing device error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Mounting the drive, going to the /boot directory and editing boot.cfg - I can't seem to find this file. Am I missing something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice is much appreciated. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="6524" LastEditorUserId="26" LastEditDate="2016-09-25T16:10:48.963" LastActivityDate="2016-10-05T20:07:58.420" Title="Persistent USB mode for elementary OS Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8104" PostTypeId="2" ParentId="8098" CreationDate="2016-09-22T17:46:33.067" Score="0" Body="&lt;p&gt;You did not state if these windows opened up that way ... or if you did something to make them that way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SO ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I am at work right now I cannot test this out ... but ... did you try to double-click the title bar?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My recollection is that the first double-click will maximize the window&#xA;and the second double-click will resize it back to its default opening size.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-09-22T17:46:33.067" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8105" PostTypeId="1" CreationDate="2016-09-22T18:19:15.753" Score="0" ViewCount="8691" Body="&lt;p&gt;I am the user of Elementary OS Luna, and was quiet satisfied with it. Yesterday I heard of &lt;code&gt;Loki&lt;/code&gt; and wanted to give it a try. and it's cool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I found some weird issue of library missing while installing some &lt;code&gt;.deb&lt;/code&gt; packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't install &lt;code&gt;atom text-editor&lt;/code&gt; &lt;code&gt;upwork time tracking app&lt;/code&gt; and &lt;code&gt;Google Chrome&lt;/code&gt; due to some dependency missing problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below I have attached the error screenshot while installing &lt;code&gt;Google Chrome Stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h8xfT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h8xfT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6526" LastEditorUserId="16827" LastEditDate="2019-05-14T14:25:00.697" LastActivityDate="2019-05-14T14:25:00.697" Title="Install Google Chrome on Loki" Tags="|software-installation|" AnswerCount="3" CommentCount="0" ClosedDate="2016-09-25T16:00:32.647" ContentLicense="CC BY-SA 3.0" />
  <row Id="8106" PostTypeId="2" ParentId="8105" CreationDate="2016-09-22T18:27:04.563" Score="1" Body="&lt;p&gt;The easiest way to fix this is to install GDebi (sudo apt-get install gdebi) and open and install the .deb with GDebi.&lt;/p&gt;&#xA;" OwnerUserId="6523" LastActivityDate="2016-09-22T18:27:04.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8107" PostTypeId="2" ParentId="7734" CreationDate="2016-09-22T19:09:09.613" Score="2" Body="&lt;p&gt;Type &lt;code&gt;gksu scratch-text-editor &quot;/usr/share/themes/elementary/gtk-3.0/apps.css&quot;&lt;/code&gt;  in terminal and go search pannel class in the css file, there u can set the colors, opacity and so on. This is what I did today!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case u dont have gksu, type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;DON'T forget to REBOOT !&lt;/p&gt;&#xA;" OwnerUserId="6527" LastEditorUserId="26" LastEditDate="2016-09-25T16:28:25.030" LastActivityDate="2016-09-25T16:28:25.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8108" PostTypeId="2" ParentId="8098" CreationDate="2016-09-22T19:14:24.993" Score="1" Body="&lt;p&gt;This is a bug in Mutter or Gala, reported at &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1623206&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Feel free to add more details and track the issue there.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-09-22T19:14:24.993" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8109" PostTypeId="1" CreationDate="2016-09-22T19:37:44.690" Score="1" ViewCount="502" Body="&lt;p&gt;I'm new to linux and I decided to replace my Windows 10 with elementary OS. I'm using an Asus ROG GL552VW, i7 Processor, and a NVIDIA GeForce GTX 960M. First time when I installed it the fan was running without stopping at the maximum speed and I was able to fix that with &lt;code&gt;acpi=off&lt;/code&gt;. After that I found a lot more bugs, this is a list with them, maybe you know how to fix one of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) Can't shutdown the laptop, I need to force it with long press button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b) The touchpad is not working anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;c) No keyboard backlights.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;d) FN keys not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;e) From time to time the screen tears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how my grub file looks like!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=5&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash acpi=off&quot;&#xA;#GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6527" LastEditorUserId="26" LastEditDate="2016-09-23T00:21:07.030" LastActivityDate="2016-09-23T00:21:07.030" Title="A lot of issues with the new eOS loki, any tip is good!" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8110" PostTypeId="2" ParentId="7314" CreationDate="2016-09-22T20:38:48.667" Score="0" Body="&lt;p&gt;OK. I can confirm the other answer is actually working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;with one exception. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wasn't able to start my grub, but I was able to ctrl + alt + F1 into my terminal, where I have fully running Freya, just without a front end. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;NOTE&lt;/em&gt; This is only a solution if you previously installed proprietary NVidia driver, and you will need to use your Nvidia installer to recover.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to get your front end, steps are:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;wait until your screen is blacked out, hit ctrl+alt+F1 into terminal.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;in terminal check if you can turn off you x server by:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;service lightdm stop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;if it says unknown instance, then you ignore it for the moment. &lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;now get your Nvidia installer to do the following:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;~$: ./NVIDIA-Linux-x86_64-361.45.11.run --uninstall&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;NOTE&lt;/em&gt; if you did what Ryan (the other answer) said, using apt-get purge to remove it, you will still need to do this step.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;now restart and boot into terminal again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;now run: &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;~$: chmod +x NVIDIA-Linux-x86_64-361.45.11.run&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;~$: sudo ./NVIDIA-Linux-x86_64-361.45.11.run&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;follow the instruction to complete NVIDIA installation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;once complete you can run:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;~$: service lightdm start&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;you should now see your GUI back.&lt;/p&gt;&#xA;" OwnerUserId="5136" LastActivityDate="2016-09-22T20:38:48.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8111" PostTypeId="2" ParentId="8109" CreationDate="2016-09-22T21:35:35.580" Score="2" Body="&lt;p&gt;Your hardware is too new.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have read that Elementary OS' s latest ISO works &quot;out of the box &quot; with only the nouveau. modeset= 0 directive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to try have a look here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://rog.asus.com/forum/showthread.php?81702-Linux-installation-in-ASUS-ROG-GL552VW-DH71&amp;amp;p=563084&quot; rel=&quot;nofollow&quot;&gt;https://rog.asus.com/forum/showthread.php?81702-Linux-installation-in-ASUS-ROG-GL552VW-DH71&amp;amp;p=563084&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2016-09-22T21:35:35.580" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8112" PostTypeId="2" ParentId="8105" CreationDate="2016-09-22T21:41:55.303" Score="1" Body="&lt;p&gt;Just do &lt;code&gt;sudo apt -f install&lt;/code&gt; after this. &lt;code&gt;dpkg -i&lt;/code&gt; or &lt;code&gt;dpkg --install&lt;/code&gt; doesn't install dependencies automatically. &lt;/p&gt;&#xA;" OwnerUserId="6259" LastActivityDate="2016-09-22T21:41:55.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8114" PostTypeId="2" ParentId="8050" CreationDate="2016-09-23T00:12:10.793" Score="1" Body="&lt;p&gt;You ca disable your touchpad using your keys on your keyboard if you have (for example on mine laptop: Fn + F4) or follow this instructions on the link bellow: &#xA;&lt;a href=&quot;https://askubuntu.com/questions/65951/how-to-disable-the-touchpad&quot;&gt;https://askubuntu.com/questions/65951/how-to-disable-the-touchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6530" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-23T00:12:10.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8115" PostTypeId="1" CreationDate="2016-09-23T01:41:26.720" Score="0" ViewCount="701" Body="&lt;p&gt;The menu content never changes&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/N0d60i3j-AA&quot; rel=&quot;nofollow&quot;&gt;https://youtu.be/N0d60i3j-AA&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also happens to Psensor, too.&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-09-23T12:57:34.500" LastActivityDate="2016-09-23T12:57:34.500" Title="System Load Indicator (indicator-multiload) doesn't work correctly on Loki" Tags="|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8116" PostTypeId="1" CreationDate="2016-09-23T03:39:59.413" Score="0" ViewCount="180" Body="&lt;p&gt;There is no option for me to choose the DSL network unless I delete the Cable network.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lOQY8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lOQY8.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-09-23T17:32:33.063" Title="There is no option for me to connect to DSL network" Tags="|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8117" PostTypeId="1" CreationDate="2016-09-23T06:00:58.110" Score="2" ViewCount="320" Body="&lt;p&gt;I had no trouble installing steam through the terminal using &lt;code&gt;sudo apt install steam&lt;/code&gt;, however any attempt at installing Steam through the AppCenter would do nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am able to install other applications through the AppCenter without problem.&lt;/p&gt;&#xA;" OwnerUserId="6536" LastEditorUserId="26" LastEditDate="2016-09-25T19:32:59.150" LastActivityDate="2016-09-25T19:32:59.150" Title="Can't install Steam through AppCenter" Tags="|appcenter|" AnswerCount="0" CommentCount="2" ClosedDate="2016-12-26T17:59:57.020" ContentLicense="CC BY-SA 3.0" />
  <row Id="8118" PostTypeId="2" ParentId="6888" CreationDate="2016-09-23T07:47:12.860" Score="0" Body="&lt;p&gt;I don't know if this was ever posted as a bug, but looks like one, which I sorrily can no longer investigate for I am in Loki, where the problem is utterly absent as the 'tray' panel area is administered by a different application. More &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4227/170&quot;&gt;here&lt;/a&gt;. Also &lt;a href=&quot;http://blog.elementary.io/post/145881464631/loki-beta&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-23T20:40:03.377" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8119" PostTypeId="1" AcceptedAnswerId="13384" CreationDate="2016-09-23T07:57:41.273" Score="4" ViewCount="103" Body="&lt;p&gt;Among others I often switch by short-key between two different layouts of the same language: English (US) and English (US, international with dead keys). But both are indicated in the panel with the same name: &lt;strong&gt;us&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In other systems I have seen these differentiated somehow: when a second layout of US English is added, it is displayed as 'us.', a third one as 'us..', etc, and in KDE the name displayed can be completely customized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there some place where I can edit to differentiate those two layouts in the panel?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-09-25T07:49:47.843" Title="Can the keyboard layout name on the panel be edited?" Tags="|keyboard|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8123" PostTypeId="1" CreationDate="2016-09-23T10:42:56.060" Score="2" ViewCount="3188" Body="&lt;p&gt;Rebooted the system and the dock is missing......&#xA;Tried looking for the dock with dpkg -l and apt list but could not find it.&#xA;Tried installing the dock from the repos using apt-get install pantheon-dock but there isn't such package....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have idea how to return it back?&lt;/p&gt;&#xA;" OwnerUserId="6200" LastActivityDate="2018-12-30T22:54:27.917" Title="Loki - Dock missing" Tags="|release-loki|system|plank|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8124" PostTypeId="1" CreationDate="2016-09-23T11:49:10.807" Score="0" ViewCount="97" Body="&lt;p&gt;There's a recent bug for ubuntu based distros which have Intel graphics boards. You can read description here, but basically mouse pointer dissapears after login&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see that Elementary released a fix for it. I've updated my Freya install with latest updates and still have the bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to know which is that patch and try to download/apply it manually?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot&lt;/p&gt;&#xA;" OwnerUserId="95" LastActivityDate="2016-10-01T10:43:34.247" Title="Having trouble with mouse pointer dissapearing after login" Tags="|mouse|graphics|intel|greeter|" AnswerCount="2" CommentCount="3" ClosedDate="2016-10-02T14:29:16.737" ContentLicense="CC BY-SA 3.0" />
  <row Id="8127" PostTypeId="2" ParentId="8115" CreationDate="2016-09-23T12:21:32.347" Score="1" Body="&lt;p&gt;I'm using &lt;a href=&quot;https://launchpad.net/syspeek&quot; rel=&quot;nofollow&quot;&gt;syspeek&lt;/a&gt; but indicator menu content doesn't refresh automatically. And dropbox indicator has no menu entry..&lt;/p&gt;&#xA;" OwnerUserId="5442" LastActivityDate="2016-09-23T12:21:32.347" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8128" PostTypeId="1" AcceptedAnswerId="8232" CreationDate="2016-09-23T13:33:22.493" Score="0" ViewCount="5834" Body="&lt;p&gt;I am using Elementary OS Loki and sometimes when I reboot or turn on the laptop, after login screen, wingpanel and Plank doesn't show up. How can I debug this? where I can find log files or something?&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2016-09-27T13:19:19.893" Title="Desktop desn't loads after reboot" Tags="|release-loki|wingpanel|plank|desktop|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-27T16:47:03.100" ContentLicense="CC BY-SA 3.0" />
  <row Id="8129" PostTypeId="1" AcceptedAnswerId="8132" CreationDate="2016-09-23T13:39:17.507" Score="0" ViewCount="3035" Body="&lt;p&gt;Hello I'm a linux noob and I've done a mess with the sources.list.d folder trying to resolve an issue with repos. I've executed these lines of code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -r /etc/apt/sources.list.d/*&#xA;sudo apt clean&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&#xA;sudo apt autoremove&#xA;cat /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I've deleted all the .list files. Where there any elementary specific repo? I'm using loki 0.4 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="6544" LastEditorUserId="26" LastEditDate="2016-09-25T16:09:27.553" LastActivityDate="2023-03-17T03:03:20.470" Title="Deleted all .list files on /etc/apt/sources.list.d* recover elementary .list files" Tags="|release-loki|sources|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8130" PostTypeId="1" CreationDate="2016-09-23T15:13:06.620" Score="2" ViewCount="252" Body="&lt;p&gt;I managed to get elementary OS Loki to be installed in persistent USB thumb drive, which I intend to use as a portable OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All's great, except that I am unable to access all the apps in the App Center. I believe this is because I am in live mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any config I can edit to enable me to have full access to the App Center?&lt;/p&gt;&#xA;" OwnerUserId="6524" LastEditorUserId="242" LastEditDate="2017-04-11T17:15:30.993" LastActivityDate="2017-04-11T17:15:30.993" Title="How to access full app center in live mode" Tags="|release-loki|appcenter|live-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8131" PostTypeId="1" CreationDate="2016-09-23T15:19:04.193" Score="0" ViewCount="1297" Body="&lt;p&gt;I have eOS running great on an Acer C720 with the exception of the function keys. That model like other chromebooks uses non-standard f1-f12 settings. Does anyone have any resource for getting these keys working as they would in ChromeOS or perhaps how they're configured in GalliumOS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keyboard is shown below. &#xA;&lt;a href=&quot;http://www.laptopmag.com/images/uploads/4248/g/acer-chromebook-c720-late-2014-g14.jpg&quot; rel=&quot;nofollow&quot;&gt;http://www.laptopmag.com/images/uploads/4248/g/acer-chromebook-c720-late-2014-g14.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6547" LastActivityDate="2022-12-07T04:06:24.397" Title="C720 Function Key Configuration" Tags="|keyboard|chromebook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8132" PostTypeId="2" ParentId="8129" CreationDate="2016-09-23T17:19:54.933" Score="2" Body="&lt;p&gt;ok, i'm noob too, but I have a elementary.list file there and it contains:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm using loki too&lt;/p&gt;&#xA;" OwnerUserId="6549" LastEditorUserId="26" LastEditDate="2016-09-23T18:17:41.423" LastActivityDate="2016-09-23T18:17:41.423" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8133" PostTypeId="2" ParentId="7908" CreationDate="2016-09-23T17:22:00.350" Score="0" Body="&lt;p&gt;I figured out what the main reason was. In case it might help someone:&#xA;despite the fact that the driver for the screen was pointed to my Intel integrated GPU, my nVidia GPU was still using lots of power. I disabled it via an ACPI call.&#xA;First check which VGA devices are in use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep VGA&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will show all the GPU's. Notice the state (rev xx, mine is rev a2 for the nVidia one).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following commands worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install acpi-call&#xA;sudo modprobe acpi_call&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This method requires you to have the Linux headers already installed for your kernel, which was the case for me.&#xA;Then run the following sh script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;if lsmod | grep -q acpi_call; then&#xA;methods=&quot;&#xA;\_SB.PCI0.P0P1.VGA._OFF&#xA;\_SB.PCI0.P0P2.VGA._OFF&#xA;\_SB_.PCI0.OVGA.ATPX&#xA;\_SB_.PCI0.OVGA.XTPX&#xA;\_SB.PCI0.P0P3.PEGP._OFF&#xA;\_SB.PCI0.P0P2.PEGP._OFF&#xA;\_SB.PCI0.P0P1.PEGP._OFF&#xA;\_SB.PCI0.MXR0.MXM0._OFF&#xA;\_SB.PCI0.PEG1.GFX0._OFF&#xA;\_SB.PCI0.PEG0.GFX0.DOFF&#xA;\_SB.PCI0.PEG1.GFX0.DOFF&#xA;\_SB.PCI0.PEG0.PEGP._OFF&#xA;\_SB.PCI0.XVR0.Z01I.DGOF&#xA;\_SB.PCI0.PEGR.GFX0._OFF&#xA;\_SB.PCI0.PEG.VID._OFF&#xA;\_SB.PCI0.PEG0.VID._OFF&#xA;\_SB.PCI0.P0P2.DGPU._OFF&#xA;\_SB.PCI0.P0P4.DGPU.DOFF&#xA;\_SB.PCI0.IXVE.IGPU.DGOF&#xA;\_SB.PCI0.RP00.VGA._PS3&#xA;\_SB.PCI0.RP00.VGA.P3MO&#xA;\_SB.PCI0.GFX0.DSM._T_0&#xA;\_SB.PCI0.LPC.EC.PUBS._OFF&#xA;\_SB.PCI0.P0P2.NVID._OFF&#xA;\_SB.PCI0.P0P2.VGA.PX02&#xA;\_SB_.PCI0.PEGP.DGFX._OFF&#xA;\_SB_.PCI0.VGA.PX02&#xA;\_SB.PCI0.PEG0.PEGP.SGOF&#xA;\_SB.PCI0.AGP.VGA.PX02&#xA;&quot;&#xA;&#xA;for m in $methods; do&#xA;    echo -n &quot;Trying $m: &quot;&#xA;    echo $m &amp;gt; /proc/acpi/call&#xA;    result=$(cat /proc/acpi/call)&#xA;    case &quot;$result&quot; in&#xA;        Error*)&#xA;            echo &quot;failed&quot;&#xA;        ;;&#xA;        *)&#xA;            echo &quot;works!&quot;&#xA;            # break # try out outher methods too&#xA;        ;;&#xA;    esac&#xA;done&#xA;&#xA;else&#xA;    echo &quot;The acpi_call module is not loaded, try running 'modprobe acpi_call' or 'insmod acpi_call.ko' as root&quot;&#xA;    exit 1&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are lucky, one of of the lines will end at 'works!'.&#xA;Running &lt;code&gt;lspci | grep VGA&lt;/code&gt; again and look at the rev. It should now say rev ff. This means your card is disconnected.&#xA;This needs to be done every system boot. So you may want to add the following line to /etc/rc.local which will automate this vor you:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;modprobe acpi-call&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then place the script above. You may remove all others except the one that worked for you.&lt;/p&gt;&#xA;" OwnerUserId="5045" LastEditorUserId="5045" LastEditDate="2016-09-23T17:29:11.347" LastActivityDate="2016-09-23T17:29:11.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8134" PostTypeId="2" ParentId="1090" CreationDate="2016-09-23T17:24:12.250" Score="1" Body="&lt;p&gt;Make sure your descrete graphics are turned off I disabled it via an ACPI call.&#xA;First check which VGA devices are in use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep VGA&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will show all the GPU's. Notice the state (rev xx, mine is rev a2 for the nVidia one).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following commands worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install acpi-call&#xA;sudo modprobe acpi_call&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This method requires you to have the Linux headers already installed for your kernel, which was the case for me.&#xA;Then run the following sh script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;if lsmod | grep -q acpi_call; then&#xA;methods=&quot;&#xA;\_SB.PCI0.P0P1.VGA._OFF&#xA;\_SB.PCI0.P0P2.VGA._OFF&#xA;\_SB_.PCI0.OVGA.ATPX&#xA;\_SB_.PCI0.OVGA.XTPX&#xA;\_SB.PCI0.P0P3.PEGP._OFF&#xA;\_SB.PCI0.P0P2.PEGP._OFF&#xA;\_SB.PCI0.P0P1.PEGP._OFF&#xA;\_SB.PCI0.MXR0.MXM0._OFF&#xA;\_SB.PCI0.PEG1.GFX0._OFF&#xA;\_SB.PCI0.PEG0.GFX0.DOFF&#xA;\_SB.PCI0.PEG1.GFX0.DOFF&#xA;\_SB.PCI0.PEG0.PEGP._OFF&#xA;\_SB.PCI0.XVR0.Z01I.DGOF&#xA;\_SB.PCI0.PEGR.GFX0._OFF&#xA;\_SB.PCI0.PEG.VID._OFF&#xA;\_SB.PCI0.PEG0.VID._OFF&#xA;\_SB.PCI0.P0P2.DGPU._OFF&#xA;\_SB.PCI0.P0P4.DGPU.DOFF&#xA;\_SB.PCI0.IXVE.IGPU.DGOF&#xA;\_SB.PCI0.RP00.VGA._PS3&#xA;\_SB.PCI0.RP00.VGA.P3MO&#xA;\_SB.PCI0.GFX0.DSM._T_0&#xA;\_SB.PCI0.LPC.EC.PUBS._OFF&#xA;\_SB.PCI0.P0P2.NVID._OFF&#xA;\_SB.PCI0.P0P2.VGA.PX02&#xA;\_SB_.PCI0.PEGP.DGFX._OFF&#xA;\_SB_.PCI0.VGA.PX02&#xA;\_SB.PCI0.PEG0.PEGP.SGOF&#xA;\_SB.PCI0.AGP.VGA.PX02&#xA;&quot;&#xA;&#xA;for m in $methods; do&#xA;    echo -n &quot;Trying $m: &quot;&#xA;    echo $m &amp;gt; /proc/acpi/call&#xA;    result=$(cat /proc/acpi/call)&#xA;    case &quot;$result&quot; in&#xA;        Error*)&#xA;            echo &quot;failed&quot;&#xA;        ;;&#xA;        *)&#xA;            echo &quot;works!&quot;&#xA;            # break # try out outher methods too&#xA;        ;;&#xA;    esac&#xA;done&#xA;&#xA;else&#xA;    echo &quot;The acpi_call module is not loaded, try running 'modprobe acpi_call' or 'insmod acpi_call.ko' as root&quot;&#xA;    exit 1&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are lucky, one of of the lines will end at 'works!'.&#xA;Running &lt;code&gt;lspci | grep VGA&lt;/code&gt; again and look at the rev. It should now say rev ff. This means your card is disconnected.&#xA;This needs to be done every system boot. So you may want to add the following line to /etc/rc.local which will automate this vor you:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;modprobe acpi-call&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then place the script above. You may remove all others except the one that worked for you.&lt;/p&gt;&#xA;" OwnerUserId="5045" LastActivityDate="2016-09-23T17:24:12.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8135" PostTypeId="2" ParentId="8116" CreationDate="2016-09-23T17:32:33.063" Score="1" Body="&lt;p&gt;Click on the DSL connection &gt; Edit &gt; General tab &gt; tick &quot;Automatically connect to this network when it is available&quot; &gt; Save&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-09-23T17:32:33.063" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8136" PostTypeId="2" ParentId="8105" CreationDate="2016-09-23T20:31:14.997" Score="0" Body="&lt;p&gt;On a new install/upgrade:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install gdebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Download the .deb from Google.com/Chrome (Note: Chrome is 64-bit only on Linux)&#xA;Select the download and go from there; or navigate to your 'files' (Applications &gt; Files &gt; Downloads (OR Windows/Command key + Space and type files)) and launch the installer (Click 'Install Package').&lt;/p&gt;&#xA;" OwnerUserId="6553" LastEditorUserId="26" LastEditDate="2016-09-25T16:00:15.023" LastActivityDate="2016-09-25T16:00:15.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8137" PostTypeId="2" ParentId="7848" CreationDate="2016-09-23T20:34:59.353" Score="3" Body="&lt;p&gt;There currently is not, but there is already a &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1612810&quot; rel=&quot;nofollow&quot;&gt;filed feature request&lt;/a&gt;. At the moment, packages don't provide changelogs, so this would require both adding support in AppCenter for showing appstream release tag data and for apps to implement it&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-09-23T20:34:59.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8138" PostTypeId="1" AcceptedAnswerId="8139" CreationDate="2016-09-23T20:46:45.913" Score="1" ViewCount="13070" Body="&lt;p&gt;I would like to use Ubuntu Software Centre just because it has more apps than AppCenter does and is just more enjoyable to use. However every time I try to open it, its icon appears in a dock and then it just shuts down and disappears. I could not find a fix anywhere. I tried installing it by both just downloading it from AppCenter and by &lt;code&gt;sudo apt-get install software-center&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="6555" LastActivityDate="2018-02-21T11:27:02.877" Title="Ubuntu Software Centre not opening on elementary OS" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8139" PostTypeId="2" ParentId="8138" CreationDate="2016-09-23T22:55:26.533" Score="3" Body="&lt;p&gt;You can install the new shop of Ubuntu, the Gnome Software:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install via the command line: &lt;code&gt;sudo apt install gnome-software&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or via AppCenter, looking for &lt;code&gt;gnome-software&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wKpbd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wKpbd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6175" LastEditorUserId="6479" LastEditDate="2016-09-24T01:09:34.840" LastActivityDate="2016-09-24T01:09:34.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8140" PostTypeId="2" ParentId="8138" CreationDate="2016-09-23T23:02:07.557" Score="1" Body="&lt;p&gt;You should try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install gnome-software&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GNOME Software is set to replace  Ubuntu Software Center in 16.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The program can be used to add and manage repositories as well as UbuntuPersonal Package Archives (PPA). Ubuntu replaced its previous Ubuntu Software Center program with GNOME Software starting with Ubuntu 16.04 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &#xA;&lt;a href=&quot;https://en.wikipedia.org/wiki/GNOME_Software&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://en.wikipedia.org/wiki/GNOME_Software&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="26" LastEditDate="2018-02-21T11:27:02.877" LastActivityDate="2018-02-21T11:27:02.877" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8141" PostTypeId="1" CreationDate="2016-09-23T23:13:19.943" Score="2" ViewCount="1126" Body="&lt;p&gt;just installed my third machine with Elementary OS but AppCenter results are blank when searching or following categories. Wifi connection is fine - I've tried apt-get remove --purge and reinstalling but it's still blank. Any help please?&lt;/p&gt;&#xA;" OwnerUserId="6558" LastActivityDate="2016-10-01T23:37:10.863" Title="Empty AppCenter" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ClosedDate="2016-09-25T15:43:45.377" ContentLicense="CC BY-SA 3.0" />
  <row Id="8142" PostTypeId="2" ParentId="7852" CreationDate="2016-09-24T00:01:46.947" Score="-1" Body="&lt;p&gt;you may try to run this on terminal: &#xA;sudo systemctl disable cups-browsed&lt;/p&gt;&#xA;" OwnerUserId="6559" LastActivityDate="2016-09-24T00:01:46.947" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8145" PostTypeId="1" CreationDate="2016-09-24T07:51:55.077" Score="1" ViewCount="634" Body="&lt;p&gt;As title says, i wonder it there are any way to remove plank without elementary-tweaks too, since i installed docky because it supports the magnifying effect that plank does not have. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;These 2 packages seems to be linked. Any hints?&lt;/p&gt;&#xA;" OwnerUserId="6476" LastActivityDate="2016-11-14T21:14:42.883" Title="Remove plank without removing elementary-tweaks in Loki?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8146" PostTypeId="1" CreationDate="2016-09-24T09:07:05.223" Score="1" ViewCount="765" Body="&lt;p&gt;There was no .bashrc or .bash_profile in my home folder.&#xA;I created a new file and put inside my aliases. They don't work, terminal ignores everything.&#xA;Why?&lt;/p&gt;&#xA;" OwnerUserId="6502" LastActivityDate="2020-04-14T14:22:10.267" Title=".bashrc doesn't exist and doesn't work" Tags="|release-loki|system|pantheon-terminal|bash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8147" PostTypeId="1" CreationDate="2016-09-24T09:29:45.193" Score="1" ViewCount="129" Body="&lt;p&gt;I tried to to workaround elementary os not having the option of automount at startup by using the gnome-disks-utility and then it modified the /etc/fstab file. It was working fine, until after I installed some system updates using the AppCenter. the dock and wingpanel load after a very long time and the system shuts down slowly. &#xA;So, I was wondering how to revert back to the default mounting procedure used by elementary os (without using /etc/fstab) , because when I deleted every line in fstab, the system wouldn't boot&lt;/p&gt;&#xA;" OwnerUserId="5459" LastActivityDate="2016-12-14T22:05:58.980" Title="Messed up Mount Options" Tags="|release-loki|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8148" PostTypeId="2" ParentId="8141" CreationDate="2016-09-24T10:45:56.633" Score="1" Body="&lt;p&gt;A possible solution could be:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After removing appcenter reboot your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install appcenter again (do not forget &lt;code&gt;sudo apt-get update&lt;/code&gt; after installing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not solved try rebooting again after &lt;code&gt;sudo apt-get update&lt;/code&gt; and check if this last reboot solved the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1615270&quot; rel=&quot;nofollow&quot;&gt;known bug&lt;/a&gt; on high priority and with a $50 bounty.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-10-01T23:37:10.863" LastActivityDate="2016-10-01T23:37:10.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8149" PostTypeId="1" AcceptedAnswerId="8162" CreationDate="2016-09-24T11:02:11.730" Score="0" ViewCount="99" Body="&lt;p&gt;I've been using elementary OS Freya for almost a year and recently switched to Loki, which is much better in every aspect.&#xA;As a daily user of the OS, I see areas where I feel that some features can be added.&#xA;Where can I post my ideas so that the team will see or at least answer me?&lt;/p&gt;&#xA;" OwnerUserId="5195" LastEditorUserId="5565" LastEditDate="2016-10-07T01:58:25.017" LastActivityDate="2016-10-07T02:18:51.867" Title="Contributing to elementary OS team" Tags="|development|elementary-project|" AnswerCount="2" CommentCount="0" ClosedDate="2016-10-09T00:23:23.077" ContentLicense="CC BY-SA 3.0" />
  <row Id="8151" PostTypeId="2" ParentId="4455" CreationDate="2016-09-24T12:26:39.813" Score="1" Body="&lt;p&gt;I've got the same issue with my Dell Inspiron N5010 and the Broadcomm Wireless Adapter. There's a bug report where you can add some piece of information about the problem: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1080959&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1080959&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards!&lt;/p&gt;&#xA;" OwnerUserId="6565" LastActivityDate="2016-09-24T12:26:39.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8153" PostTypeId="1" CreationDate="2016-09-24T13:07:17.410" Score="5" ViewCount="1647" Body="&lt;p&gt;OS - El Loki stable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hello! I have a problem when i use PHPStorm or something.&#xA;For example i need to Push my commits to git. I press ctrl+shift+k and keyboard layout switch first, and CTRL+SHIFT+K not works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any fix of this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This also happens with other keyboard shortcut's (CTRL+SHIFT+C, CTRL+SHIF+F etc)&lt;/p&gt;&#xA;" OwnerUserId="6566" LastEditorUserId="5565" LastEditDate="2016-09-26T17:18:37.147" LastActivityDate="2017-08-12T03:07:33.143" Title="CTRL + SHIFT + key when using CTRL+SHIFT to switch keyboard layout" Tags="|release-loki|keyboard|keyboard-shortcuts|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8154" PostTypeId="2" ParentId="8040" CreationDate="2016-09-24T13:23:11.287" Score="2" Body="&lt;p&gt;There is no need. Just do &lt;code&gt;Ctrl + Right Click&lt;/code&gt; over the dock and select preferences. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still want to add the icon to launch preferences, then copy the plank launcher (located in &lt;code&gt;/usr/share/applications&lt;/code&gt;) into your personal app folder (&lt;code&gt;~/.local/share/applications&lt;/code&gt;) and edit the desktop file. Modify the line that says &lt;code&gt;execute = plank&lt;/code&gt; by  &lt;code&gt;execute = plank --preferences&lt;/code&gt; and you will have the launcher you are looking for. Change the permissions (chmod +x &lt;code&gt;~/.local/share/applications/plank.desktop&lt;/code&gt;) and drag it into the dock. Cheers!&lt;/p&gt;&#xA;" OwnerUserId="5394" LastEditorUserId="5394" LastEditDate="2016-10-09T10:29:39.290" LastActivityDate="2016-10-09T10:29:39.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8155" PostTypeId="1" AcceptedAnswerId="8906" CreationDate="2016-09-24T13:33:18.170" Score="0" ViewCount="228" Body="&lt;p&gt;Whenever AppCenter shows that there are updates, I notice three things happen:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The icon in Slingshot menu shows the update count.&lt;/li&gt;&#xA;&lt;li&gt;The icon for AppCenter temporarily stickies on the dock with the update count shown.&lt;/li&gt;&#xA;&lt;li&gt;There is a notification which can be dismissed at will.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I usually prefer to do my updates via the terminal so I can see what is changing. However, I've noticed that the AppCenter icon still sits in my dock and shows an update count, and so does the icon in Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The intended behaviour would be that once the updates are done, the icon would leave the dock, and the counter on the Slingshot icon would go back to nil.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried updating my package list again using apt from the terminal (which tells me all my packages are up to date), but the icons still show updates.&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-10-28T00:04:51.497" Title="AppCenter icons still show updates pending after terminal (apt) is used to upgrade packages" Tags="|release-loki|plank|slingshot|appcenter|" AnswerCount="2" CommentCount="0" ClosedDate="2016-10-28T02:20:52.487" ContentLicense="CC BY-SA 3.0" />
  <row Id="8156" PostTypeId="2" ParentId="8141" CreationDate="2016-09-24T13:39:06.293" Score="1" Body="&lt;p&gt;If you run AppCenter without running &lt;code&gt;sudo apt update&lt;/code&gt; at least one time, it shows up empty. As you might have guessed, run &lt;code&gt;sudo apt update&lt;/code&gt; and then open up AppCenter and things should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1615270&quot; rel=&quot;nofollow&quot;&gt;known bug&lt;/a&gt; on high importance and with a $30 bounty.&lt;/p&gt;&#xA;" OwnerUserId="5811" LastEditorUserId="5811" LastEditDate="2016-09-28T17:31:45.780" LastActivityDate="2016-09-28T17:31:45.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8159" PostTypeId="1" CreationDate="2016-09-24T17:19:57.837" Score="5" ViewCount="238" Body="&lt;p&gt;I am using elementary OS version 0.3.2 and it works just fine. I tried elementary OS version 0.4 and the text on everything is too light. Both of these have been used on a desktop computer. Is there a way to make the text darker on version 0.4?&lt;/p&gt;&#xA;" OwnerUserId="6570" LastEditorUserId="45" LastEditDate="2016-12-06T18:12:06.123" LastActivityDate="2017-02-06T15:39:59.930" Title="elementary OS 0.4 text is too light. Can I make it darker?" Tags="|desktop|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8162" PostTypeId="2" ParentId="8149" CreationDate="2016-09-24T17:41:46.960" Score="1" Body="&lt;p&gt;You can propose your aditionals features to the dev team going to &lt;a href=&quot;https://blueprints.launchpad.net/elementaryos&quot; rel=&quot;nofollow&quot;&gt;Blueprints section at elementary OS Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also navigate through the various applications pages at Launchpad and propose new features in its blueprint section. To know all of them,  you can visit the metaproject page at &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-09-24T17:41:46.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8163" PostTypeId="1" CreationDate="2016-09-24T17:45:29.450" Score="2" ViewCount="380" Body="&lt;p&gt;The problem is that I can't type anythin into text box. Also Backspace and delete buttons don't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QEcPw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QEcPw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Meanwhile, I can use context menu, so we can make sure that the search itself is working succesfully.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fTYbe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fTYbe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5366" LastActivityDate="2016-11-05T06:11:24.837" Title="Can't input anything into app menu search box" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ClosedDate="2016-11-12T19:41:52.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="8165" PostTypeId="1" CreationDate="2016-09-24T20:46:11.077" Score="1" ViewCount="268" Body="&lt;p&gt;I´m using a HP Stream 13 which has a Realtek RTL8723BE (or similar) wifi/bluetooth chip with elementary OS Loki 0.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wifi is always working after reboot of system. Sometimes my network show great strengh, sometimes the signal is very low. It changes dramaticaly even when I´m at one spot. Sooner or later I´m still connected but no services nor sites will load.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I shut wifi down and turn it on again. Sometimes it works, sometimes Wifi won´t turn on again. To make it work again, I restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other devices have no issue with my Wifi. I used Ubuntu 16.04 till yesterday. Under Ubuntu je Wifi worked fine. Sometimes i needed to restart networking after waking up my laptop from suspension, but that was just ocassionaly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&#xA;Thanks!&#xA;Pier&lt;/p&gt;&#xA;" OwnerUserId="6574" LastActivityDate="2016-12-22T17:16:12.420" Title="Wifi has odd behavior" Tags="|wifi|networking|hp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8166" PostTypeId="1" CreationDate="2016-09-24T21:03:55.607" Score="1" ViewCount="927" Body="&lt;p&gt;I just upgraded from Feya to Loki and I really like it! There is just one thing thats not working properly on my computer. With my wlan stick connected i can turn on wireless, but instead of listing the networks it still says &quot;wireless is disabled; enable wireless to discover nearby wireless access points.&quot; The funny thing is in the beginning everything worked smoothly but after turning wireless on and off one time it stopped working.&#xA;Does anyone know what the problem could be?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you all!&lt;/p&gt;&#xA;" OwnerUserId="6575" LastActivityDate="2016-09-24T22:17:08.570" Title="Wireless is always disabled, cant unable it" Tags="|release-loki|wifi|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8167" PostTypeId="1" CreationDate="2016-09-24T22:09:02.743" Score="3" ViewCount="1048" Body="&lt;p&gt;After I unlock the computer, the desktop background becomes glitched like this. However everything still works. I am currently using the default background. I installed the Nvidia driver using this tutorial: &lt;a href=&quot;https://elementaryforums.com/index.php?threads/howto-install-latest-nvidia-driver-on-linux-without-getting-black-screen.7/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HowTo: Install latest NVIDIA Driver on Linux without getting black screen&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Specs:&lt;/strong&gt;&#xA;Nvidia GTX 1070 (HDMI out to display),&#xA;i7 6800K,&#xA;32 GB DDR4 (2x 16 gb),&#xA;1x Crucial M4 512 gb(Elementary OS 0.4 Loki 64 bit),&#xA;1x Crucial M550 512 gb (Windows 10),&#xA;MSI X99 Gaming 7&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mMuEx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mMuEx.png&quot; alt=&quot;Desktop&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="6576" LastActivityDate="2017-01-12T03:29:18.773" Title="Desktop background glitch after unlock Nvidia 1070 GPU" Tags="|graphic-drivers|desktop|nvidia|" AnswerCount="1" CommentCount="0" ClosedDate="2018-02-12T09:58:00.220" ContentLicense="CC BY-SA 3.0" />
  <row Id="8168" PostTypeId="2" ParentId="8166" CreationDate="2016-09-24T22:17:08.570" Score="1" Body="&lt;p&gt;Without info regarding what Wireless adapter you are using, we really cannot help you that much. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try reloading the driver for the wireless adapter using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -v &amp;lt;wireless driver&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6576" LastActivityDate="2016-09-24T22:17:08.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8169" PostTypeId="2" ParentId="7272" CreationDate="2016-09-24T22:26:16.670" Score="1" Body="&lt;p&gt;Since it is an old laptop, I would recommend checking if the hard drive is still operational. You should be able to do this from the live CD / USB by installing Disks from the app center and then running a SMART test on the hard drive. If you have numerous relocated sectors and / or categories marked as fail in the Assessment column your hard drive is bad.&lt;/p&gt;&#xA;" OwnerUserId="6576" LastActivityDate="2016-09-24T22:26:16.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8170" PostTypeId="2" ParentId="5636" CreationDate="2016-09-24T22:28:59.733" Score="0" Body="&lt;p&gt;If you are using UEFI, you might have to go into the BIOS and change the UEFI boot order. You should see three options, Windows, Elementary OS, and Linux. Set the first boot option to the Linux, second to Elementary OS and the third to Windows.&lt;/p&gt;&#xA;" OwnerUserId="6576" LastActivityDate="2016-09-24T22:28:59.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8171" PostTypeId="2" ParentId="8129" CreationDate="2016-09-24T23:07:36.327" Score="0" Body="&lt;p&gt;Well, there is another file named &lt;code&gt;patches.list&lt;/code&gt; and that's it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6550" LastEditorUserId="26" LastEditDate="2016-09-25T16:08:59.667" LastActivityDate="2016-09-25T16:08:59.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8174" PostTypeId="1" AcceptedAnswerId="8175" CreationDate="2016-09-25T07:04:59.030" Score="4" ViewCount="4739" Body="&lt;p&gt;The OS naturally puts the &quot;close&quot; buttons on the left, but &lt;code&gt;chrome&lt;/code&gt; does not obey. Chrome's &quot;Use system title bar&quot; option just add the usual system bar above the Chrome window but I wanted the button section to remain in-line with the tabs, like it used to be but just on the other side. How can I move the button section to the left side?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2019-12-06T06:47:16.957" Title="Move Google Chrome close/minimize/maximize buttons to the left side" Tags="|release-loki|google-chrome|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8175" PostTypeId="2" ParentId="8174" CreationDate="2016-09-25T07:04:59.030" Score="4" Body="&lt;pre&gt;&lt;code&gt;gconftool-2 --set /apps/metacity/general/button_layout --type string &quot;close,minimize,maximize:&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;turns&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Romg5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Romg5.png&quot; alt=&quot;right&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/A1l8G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/A1l8G.png&quot; alt=&quot;left&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="308" LastEditDate="2019-12-06T06:47:16.957" LastActivityDate="2019-12-06T06:47:16.957" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="8176" PostTypeId="2" ParentId="8165" CreationDate="2016-09-25T07:56:12.997" Score="1" Body="&lt;p&gt;The Realtek wireless cards have a sleep mode to save battery when you don't use the net conecction. The vendor has a poor support to Linux drivers,  so you can try to disable the sleep mode with the next trick. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be fwlps=0&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot your system. If it don't solved your problem, you can use some of the forked drivers like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow noreferrer&quot;&gt;lwfinger at github.com&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2016-12-22T17:16:12.420" LastActivityDate="2016-12-22T17:16:12.420" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8177" PostTypeId="1" CreationDate="2016-09-25T08:45:01.950" Score="1" ViewCount="6401" Body="&lt;p&gt;The second day of trying to install an OS on MacBook 2011 (dual videocard) years via usb flash drive or ElementaryOS nor any other linux distro is not installed, even if i select &quot;TRY Elementary&quot; just a black screen and silence ... Google helped me that it is necessary to add in line nomodeset but it is also useless, then went to what is multiple rows and then silence. Can you recommend something else?&#xA;Distributions installed on a USB flash drive using the Etcher and Unetbotin, ie when loading them in sight, but then just black.&lt;/p&gt;&#xA;" OwnerUserId="6581" LastActivityDate="2017-01-10T15:51:58.983" Title="Black screen when installing OS" Tags="|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8178" PostTypeId="2" ParentId="4995" CreationDate="2016-09-25T09:37:56.670" Score="0" Body="&lt;p&gt;I am using the German email service GMX and found that I have to use my &lt;strong&gt;customer number instead of my email adress as a user ID&lt;/strong&gt; in Maya! Together with the Thunderbird style url, synchronization works. You might want to try that, if you haven't already. I hope it solves your problem.&lt;/p&gt;&#xA;" OwnerUserId="6463" LastActivityDate="2016-09-25T09:37:56.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8181" PostTypeId="1" AcceptedAnswerId="8684" CreationDate="2016-09-25T13:01:59.687" Score="0" ViewCount="565" Body="&lt;p&gt;I have installed macOS Sierra Theme by B00merang. There is a text colour bug when I right click in the file manager for more options of a file or a folder the texts appear white instead of black. I have seeked through the css files of the theme but I couldn't located the solution in there. The texts appears like in the following image&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IVTDc.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IVTDc.jpg&quot; alt=&quot;Light Theme&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My temporary solution for this issue was using the dark variant option in the tweaks' theme menu, which is usable but this issue really bugs me. Does anybody have any idea how to fix this issue ? The dark variant option looks like the following&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iAafM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iAafM.jpg&quot; alt=&quot;Dark Variant&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I use Loki 0.4 and I am a newbie to forum I am sorry if I have violated any rules.&lt;/p&gt;&#xA;" OwnerUserId="6564" LastEditorUserId="6564" LastEditDate="2016-09-26T09:11:11.480" LastActivityDate="2016-10-13T04:58:36.433" Title="Text color bug after installing OS X Theme" Tags="|themes|files|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8184" PostTypeId="2" ParentId="6994" CreationDate="2016-09-25T17:02:25.700" Score="4" Body="&lt;p&gt;elementary OS does not support an OEM install mode at this time.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-25T17:02:25.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8185" PostTypeId="2" ParentId="6907" CreationDate="2016-09-25T17:07:28.513" Score="3" Body="&lt;p&gt;Linux did not work in Hyper V for UEFI installations until very recently. You should find that elementary OS Freya works with legacy mode enabled, or that Loki works as intended.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-09-25T17:07:28.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8186" PostTypeId="2" ParentId="8025" CreationDate="2016-09-25T17:26:15.250" Score="0" Body="&lt;p&gt;With the last updates the bug seems to be fixed.&lt;/p&gt;&#xA;" OwnerUserId="6291" LastActivityDate="2016-09-25T17:26:15.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8187" PostTypeId="1" AcceptedAnswerId="8188" CreationDate="2016-09-25T18:37:56.393" Score="1" ViewCount="407" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3PaFg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3PaFg.png&quot; alt=&quot;Desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS has some beautiful wallpapers, which I imagine are open source, but I was surprised to find no details on their authorship in the Desktop pane of Settings. Where can I find information on the authors and their licenses?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="308" LastEditDate="2019-12-06T07:21:57.717" LastActivityDate="2019-12-06T16:41:25.233" Title="Authors and licenses of wallpaper images" Tags="|release-loki|desktop|wallpaper|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8188" PostTypeId="2" ParentId="8187" CreationDate="2016-09-25T18:37:56.393" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;strong&gt;&lt;code&gt;/usr/share/backgrounds&lt;/code&gt;&lt;/strong&gt; (or &lt;a href=&quot;https://github.com/elementary/wallpapers&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;) to find the name of the wallpaper image file&lt;/li&gt;&#xA;&lt;li&gt;Find the corresponding license at &lt;a href=&quot;https://github.com/elementary/wallpapers/blob/master/debian/copyright&quot; rel=&quot;nofollow&quot;&gt;https://github.com/elementary/wallpapers/blob/master/debian/copyright&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(Some of the images do not have have free licenses.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-25T18:37:56.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8189" PostTypeId="2" ParentId="6907" CreationDate="2016-09-25T18:51:24.917" Score="0" Body="&lt;p&gt;Yes, but only with Generation 1 VMs, configurable at the time of VM creation. There is no sound, and no video acceleration will mean the system will be sluggish.&lt;/p&gt;&#xA;" OwnerUserId="6594" LastActivityDate="2016-09-25T18:51:24.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8190" PostTypeId="2" ParentId="8052" CreationDate="2016-09-25T19:31:46.523" Score="1" Body="&lt;p&gt;Unfortunately, this option doesn't work on Freya &amp;amp; Loki now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow the progress of fixes you can &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1444519&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, also you can &lt;a href=&quot;https://www.bountysource.com/issues/37962080-allow-different-layouts-for-individual-windows-does-not-work&quot; rel=&quot;nofollow&quot;&gt;post bounty&lt;/a&gt; for this bug.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-09-25T19:31:46.523" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8192" PostTypeId="1" CreationDate="2016-09-25T20:56:28.620" Score="7" ViewCount="9528" Body="&lt;p&gt;I've been using Loki for about 3 weeks. Installing software and updates was working fine. I booted into Loki today and got a notification that I had 4 updates available. The red flag also appeared on the App Center icon on the dock. I launched App Center and clicked on the Update tab. The Update window had the following error message: &quot;No Results. No apps could be found. Try changing search terms.&quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/P8T54.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/P8T54.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to install two different software programs: virtualbox and gdebi. I tried them each separately. I had the same result both times. After clicking on the Install button the Starting progress bar appeared. I waited 5 minutes with each program and nothing else happened - no progress was shown on the progress bar. I clicked the Cancel button and the installation was canceled each time.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/U8Cnq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U8Cnq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea as to what I should do next. Anybody have any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="6595" LastEditorUserId="26" LastEditDate="2017-04-15T22:45:24.470" LastActivityDate="2021-06-09T20:15:52.220" Title="I am unable to update or install software in the AppCenter" Tags="|software-installation|updates|appcenter|" AnswerCount="6" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8194" PostTypeId="1" CreationDate="2016-09-26T00:11:05.687" Score="0" ViewCount="935" Body="&lt;p&gt;Just installed Albert in loki using this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&#xA;sudo apt update&#xA;sudo apt install albert&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;used the first time just fine. The second time crashed, and now doesn't even start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you&lt;/p&gt;&#xA;" OwnerUserId="6586" LastEditorUserId="68" LastEditDate="2016-10-01T22:39:13.933" LastActivityDate="2016-10-01T22:39:13.933" Title="Launcher Albert crashes on Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8195" PostTypeId="1" AcceptedAnswerId="8196" CreationDate="2016-09-26T00:39:21.487" Score="2" ViewCount="881" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/1128/5565&quot;&gt;Another question&lt;/a&gt; addresses a shortcut in Freya (0.3), but Alt+space is not working as a keyboard shortcut for me in Loki (0.4). Also it no longer shows as a custom shortcut in alongside the others:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qgTGj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qgTGj.png&quot; alt=&quot;Keyboard shortcuts&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What are my options for switching between keyboard layouts in Loki? &lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-26T00:39:21.487" Title="Switch between keyboard layouts with a keyboard shortcut in Loki" Tags="|release-loki|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8196" PostTypeId="2" ParentId="8195" CreationDate="2016-09-26T00:39:21.487" Score="4" Body="&lt;p&gt;It defaults to &lt;kbd&gt;Opt&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt; in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To change it, go to: &lt;code&gt;Settings &amp;gt; Keyboard pane &amp;gt; Layout subtab &amp;gt; &quot;Switch layout&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R4VVf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R4VVf.png&quot; alt=&quot;Keyboard Layout&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Commands like &lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings switch-input-source &quot;['&amp;lt;Alt&amp;gt;space']&quot;&lt;/code&gt; no longer appear to work in Loki.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-26T00:39:21.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8197" PostTypeId="2" ParentId="8194" CreationDate="2016-09-26T00:45:09.033" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/ManuelSchneid3r/albert/wiki/User-guide#installing-albert-using-package-managers&quot; rel=&quot;nofollow noreferrer&quot;&gt;Those commands&lt;/a&gt; are what you use to install Albert the first time. To run it again, either just type &lt;code&gt;albert&lt;/code&gt; in Terminal or use the Application launcher in the top left corner:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tcCdG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tcCdG.png&quot; alt=&quot;Launcher&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-26T00:45:09.033" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8198" PostTypeId="2" ParentId="8153" CreationDate="2016-09-26T01:12:47.997" Score="4" Body="&lt;p&gt;&lt;kbd&gt;Opt&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt; is the default shortcut for changing keyboard layouts in Loki, so you'll need to change that if you want to use the same modifier keys for other shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do this at &lt;code&gt;Settings &amp;gt; Keyboard pane &amp;gt; Layout subtab &amp;gt; &quot;Switch layout&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R4VVf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R4VVf.png&quot; alt=&quot;Keyboard Layout&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-26T01:12:47.997" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8200" PostTypeId="1" CreationDate="2016-09-26T07:28:35.013" Score="1" ViewCount="512" Body="&lt;p&gt;i'm running elementary os 0.4 loki on a Chromebook Pixel 2013, and so far so good, i mean everything work just fine, relly you've done a good work! now i have just one thing that i'm not able to find, how to control the keyboard backlight, it stays always on, i wish to know if there is a command for disable and enable it, thanks in advance! &lt;/p&gt;&#xA;" OwnerUserId="6600" LastActivityDate="2021-12-16T21:09:53.203" Title="Script or terminal command for enable or disable keyboard backlight" Tags="|release-loki|keyboard|chromebook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8202" PostTypeId="2" ParentId="7915" CreationDate="2016-09-26T09:51:09.080" Score="0" Body="&lt;p&gt;I'm no expert, but have you tried this?&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow&quot;&gt;Boot-repair&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked for me in previous problems i had&lt;/p&gt;&#xA;" OwnerUserId="6586" LastActivityDate="2016-09-26T09:51:09.080" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8205" PostTypeId="2" ParentId="7850" CreationDate="2016-09-26T11:53:37.443" Score="-1" Body="&lt;p&gt;Slight edits to the original posts, got it to work systemd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.pynut.com/?p=386&quot; rel=&quot;nofollow&quot;&gt;http://www.pynut.com/?p=386&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6607" LastActivityDate="2016-09-26T11:53:37.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8206" PostTypeId="1" CreationDate="2016-09-26T11:55:56.673" Score="1" ViewCount="153" Body="&lt;p&gt;I installed messenger for desktop .deb package (downloaded it from its official site). When I open it, it tries to update javascript and whatever option (update, cancel, close) I choose it does not work.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Chkgr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Chkgr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DKbJl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DKbJl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6573" LastEditorUserId="5722" LastEditDate="2016-09-26T17:18:25.523" LastActivityDate="2016-09-26T17:18:25.523" Title="Messenger for Desktop is not working (Loki)" Tags="|release-loki|thirdpartyapps|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8207" PostTypeId="1" CreationDate="2016-09-26T12:22:29.007" Score="1" ViewCount="38" Body="&lt;p&gt;I could not find a switch for spell checker. Is it being worked on? Can I disable it?&lt;/p&gt;&#xA;" OwnerUserId="3185" LastActivityDate="2016-09-26T12:22:29.007" Title="How can I disable spell checker red-line marking in Mail? (or make it work with my language)" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8208" PostTypeId="1" AcceptedAnswerId="8327" CreationDate="2016-09-26T12:54:06.480" Score="0" ViewCount="3355" Body="&lt;p&gt;Normally I've found all I need without asking a question, so please forgive me for making my first post on Stackexchange. Basically on Freya, and in Windows, my wifi and ethernet connection is fine, however on Loki 0.4 (the official release), the wifi works for 5 seconds at best, and the ethernet is the same. When it stops working, Epiphany shows a 'temporary' DNS error, it can't find the IP. I tried using IP addresses instead of domain names and it worked as far as I can tell, so it must be a DNS error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried ubuntu 16.04.1 and when I activate the additional drivers for my broadcom and intel chips the wifi and ethernet works fine, but before that the wifi card isn't even recognised, so it's a different problem to that of Loki where the wifi card is recognised right out of the box, just the DNS is not working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried manually adding in 8.8.8.8 as the DNS server, I've tried turning everything off and on again (restarting services), I've tried everything I've been able to find about resolvconf and network manager, but nothing was fixed the problem. I changed and installed Ubuntu Studio in the meantime, and I've been using the live usb of Loki to test for DNS fixes, it behaves the same way as my past install of Loki. Something specific to Loki 0.4 is messing with the DNS on my machine and making the DNS calls all fail after about 5 seconds of a connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't be the only one with this problem... Has anyone got any solutions for this type of problem (may not be Loki specific for others).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your time,&#xA;AB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, computer: Lenovo Thinkpad E330&lt;/p&gt;&#xA;" OwnerUserId="6608" LastEditorUserId="6608" LastEditDate="2016-10-03T00:11:38.447" LastActivityDate="2016-10-03T19:43:06.637" Title="Only on Elementary OS Loki 0.4, wifi and ethernet works for about 5 seconds, then nothing" Tags="|release-loki|wifi|ethernet|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8209" PostTypeId="1" AcceptedAnswerId="8210" CreationDate="2016-09-26T13:03:21.893" Score="0" ViewCount="147" Body="&lt;p&gt;I want to use camera app just for preview. Actualy I am using a microscope camera for inspecting small objects. So I do not want it to mirror the object. How can I disable this feature?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&#xA;Zsolt&lt;/p&gt;&#xA;" OwnerUserId="6609" LastActivityDate="2016-09-26T14:09:04.920" Title="How can I configure the camera app to disable mirroring?" Tags="|release-loki|settings|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8210" PostTypeId="2" ParentId="8209" CreationDate="2016-09-26T14:01:22.117" Score="1" Body="&lt;p&gt;Unfortunately, the Camera app is hardcoded to always flip video. It utilises &lt;a href=&quot;https://gstreamer.freedesktop.org/data/doc/gstreamer/head/gst-plugins-good-plugins/html/gst-plugins-good-plugins-videoflip.html&quot; rel=&quot;nofollow&quot;&gt;GStreamer's videoflip filter&lt;/a&gt; with a hardcoded value for the flip method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you must use the Camera app, you can disable this by cloning the code and compiling from source. You can comment out &lt;a href=&quot;https://bazaar.launchpad.net/~elementary-apps/snap-elementary/snap/view/head:/src/Widgets/CameraView.vala#L73&quot; rel=&quot;nofollow&quot;&gt;this line&lt;/a&gt; and then compile and install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An alternative which doesn't use the native Camera app, is to install &lt;a href=&quot;https://wiki.gnome.org/Apps/Cheese&quot; rel=&quot;nofollow&quot;&gt;Cheese&lt;/a&gt; and disable the 'Horizontal Flip' effect.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2016-09-26T14:09:04.920" LastActivityDate="2016-09-26T14:09:04.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8211" PostTypeId="2" ParentId="7915" CreationDate="2016-09-26T14:22:25.977" Score="0" Body="&lt;p&gt;I had boot problems too, but in my case I could only boot Windows. I recommed you to try &lt;a href=&quot;http://www.rodsbooks.com/refind/&quot; rel=&quot;nofollow&quot;&gt;rEFInd&lt;/a&gt;. Once installed, it should recognize all your OSes and let you choose which one to boot.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2016-09-26T14:22:25.977" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8212" PostTypeId="1" CreationDate="2016-09-26T14:47:43.267" Score="1" ViewCount="401" Body="&lt;p&gt;First of all thanks for the wonderful OS that Loki 0.4 is. I have been using it for the last few days and one of the issues i have faced is that the calendar app is not remembering the reminder function and does not pass this info to notification. I have also read that this is an outstanding issue. Is there a temporary fix for this?&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6612" LastActivityDate="2016-09-30T09:22:43.730" Title="Calendar reminder not working in Loki 0.4" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ClosedDate="2016-10-12T02:07:22.150" ContentLicense="CC BY-SA 3.0" />
  <row Id="8213" PostTypeId="1" CreationDate="2016-09-26T15:05:24.527" Score="1" ViewCount="2380" Body="&lt;p&gt;This is crazy! It doesn't seem like you can install or find a usable USB drive creator/format tool to make installation drives from ISOs within the OS! Am I missing something? :(&lt;/p&gt;&#xA;" OwnerUserId="6613" LastEditorUserId="5565" LastEditDate="2016-10-07T01:57:25.037" LastActivityDate="2016-10-07T01:57:25.037" Title="I just installed elementary OS. How do I make a bootable USB drive to install it?" Tags="|system-installation|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8214" PostTypeId="2" ParentId="8213" CreationDate="2016-09-26T15:19:46.263" Score="-1" Body="&lt;p&gt;Have you tried UNetbootin? It is available in the App Centre. Let's you create bootable USBs from ISO image files. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="6612" LastActivityDate="2016-09-26T15:19:46.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8215" PostTypeId="2" ParentId="8067" CreationDate="2016-09-26T15:34:22.427" Score="4" Body="&lt;p&gt;The PPA you are trying to install Gazette from has not been updated to include a build for Loki (Ubuntu Xenial). It appears that the Gazette project does not offer prebuilt binaries, so your only option is to build from source.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launchpad is currently down, so these instructions need checking.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install pre-requisite packages (check the &lt;code&gt;INSTALL&lt;/code&gt; file for specifics): &lt;code&gt;sudo apt-get install build-essential autoconf automake&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Grab the code: &lt;code&gt;bzr branch lp:gazette&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From inside the project directory, generate configure file: &lt;code&gt;./autogen.sh&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Compile like normal: &lt;code&gt;./configure &amp;amp;&amp;amp; make &amp;amp;&amp;amp; sudo make install&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-26T15:34:22.427" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8216" PostTypeId="2" ParentId="8213" CreationDate="2016-09-26T15:45:08.490" Score="2" Body="&lt;p&gt;This is covered in the &lt;a href=&quot;https://elementary.io/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary guide&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open UNetbootin from the Dash. It will open a window like the one below:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mVhZU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mVhZU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &quot;Diskimage&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click &quot;…&quot; to select the ISO that you downloaded previously.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unplug all USB memory devices apart from the one you want to use.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click &quot;OK&quot; and wait for the process to finish.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For powerusers there is the &lt;code&gt;dd&lt;/code&gt; tool. &lt;strong&gt;This method is not recommended unless you know what you are doing because of the potential for data-loss if the wrong target device is selected&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=/path/to/image.iso of=/dev/sdX&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where &lt;em&gt;sdX&lt;/em&gt; is the device identifier of your USB drive, which can be found in the output of &lt;code&gt;dmesg | grep usb&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not sure which identifier is correct, then it is not advised to use this method.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-09-26T15:45:08.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8217" PostTypeId="2" ParentId="8213" CreationDate="2016-09-26T15:57:31.533" Score="-1" Body="&lt;p&gt;In AppCenter, are you able to see any apps other than the default elementary applications? For example, if you search for Chromium or GDebi, do you get any results?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't see such applications, you may need to run &lt;code&gt;sudo apt update&lt;/code&gt; as described in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7533/no-software-is-shown-in-appcenter-except-what-is-installed&quot;&gt;this answer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-26T15:57:31.533" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8218" PostTypeId="1" AcceptedAnswerId="8243" CreationDate="2016-09-26T16:23:07.663" Score="2" ViewCount="48" Body="&lt;p&gt;I'm new on elementary OS and Linux. &#xA;I've to update the software (using the software update application) but when I click &quot;update now&quot; I've got a message that says: clean the trash and use &quot;sudo apt-get clean&quot;. &#xA;I did it but it doesn't work anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me? What I have to do?&#xA;(sorry for the bad english)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit (1): running df -h I have:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;File system     Dim. Usati Dispon. Uso% Montato su&#xA;udev            3,4G  4,0K    3,4G   1% /dev&#xA;tmpfs           691M  1,7M    690M   1% /run&#xA;/dev/dm-1       910G  122G    742G  15% /&#xA;none            4,0K     0    4,0K   0% /sys/fs/cgroup&#xA;none            5,0M  4,0K    5,0M   1% /run/lock&#xA;none            3,4G  156K    3,4G   1% /run/shm&#xA;none            100M   48K    100M   1% /run/user&#xA;/dev/sda2       237M  160M     65M  72% /boot&#xA;/dev/sda1       511M  3,4M    508M   1% /boot/efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;edit (2): using Gparted I have this.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vOULq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vOULq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and I can't resize the partition&lt;/p&gt;&#xA;" OwnerUserId="6614" LastEditorUserId="6614" LastEditDate="2016-09-27T16:50:20.250" LastActivityDate="2016-09-27T18:05:29.670" Title="&quot;You need 220 M on disc /boot&quot; What I have to do?" Tags="|updates|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8219" PostTypeId="2" ParentId="4235" CreationDate="2016-09-26T17:34:43.150" Score="1" Body="&lt;p&gt;This functionality is in the &lt;code&gt;wingpanel-indicator-datetime&lt;/code&gt; package. If you want to change the widget, you can get the source package and edit the source (in &lt;code&gt;src/Widgets/calendar&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-26T17:34:43.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8220" PostTypeId="1" CreationDate="2016-09-26T17:50:10.737" Score="2" ViewCount="125" Body="&lt;p&gt;I recently installed elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the login screen I have 3 users (2 created users and a guest) represented by blue icons. I don't see the login names behind the blue icons until I click in the space behind the icon. (I have to click icon by icon in order to find the correct user to login.) This also happens in a virtual machine, but screenshots on the Internet suggest that I should see the names behind all icons in the greeter screen. Am I doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="6615" LastEditorUserId="5565" LastEditDate="2016-09-26T22:38:20.760" LastActivityDate="2016-09-26T22:38:20.760" Title="No user names visible at Pantheon Greeter until click" Tags="|release-loki|greeter|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-09T00:23:02.210" ContentLicense="CC BY-SA 3.0" />
  <row Id="8221" PostTypeId="2" ParentId="8208" CreationDate="2016-09-26T21:51:19.463" Score="3" Body="&lt;p&gt;Same problem for my Lenovo. It seems to be something related to the Ethernet hardware power management. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install a new driver.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-headers-generic build-essential git&#xA;git clone https://github.com/lwfinger/rtlwifi_new.git&#xA;cd rtlwifi_new&#xA;make&#xA;sudo make install&#xA;sudo reboot &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6618" LastEditorUserId="26" LastEditDate="2016-09-26T22:37:59.450" LastActivityDate="2016-09-26T22:37:59.450" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8222" PostTypeId="2" ParentId="8212" CreationDate="2016-09-27T00:12:36.273" Score="0" Body="&lt;p&gt;The Calendar notifications daemon isn't installed by default. You can try to install from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install maya-calendar-daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-09-27T00:12:36.273" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8223" PostTypeId="2" ParentId="8213" CreationDate="2016-09-27T05:55:23.907" Score="0" Body="&lt;p&gt;The way I do it is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;format the USB to have only one partiton (it may work with multiple positions, but I haven't tested it). The type of the (first) partition should be &lt;code&gt;fat32&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;extract the files from the iso archive onto that partition&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;use GParted or some similar application (even the command line) to set the &lt;code&gt;boot&lt;/code&gt; flag to the partition (at this point, I can't read the USB via Files anymore, since it is not recognized as &quot;data&quot; anymore&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That's it! After this, I can use the USB to boot (installed both Freya and Loki like this) &lt;/p&gt;&#xA;" OwnerUserId="78" LastActivityDate="2016-09-27T05:55:23.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8225" PostTypeId="1" AcceptedAnswerId="8228" CreationDate="2016-09-27T07:52:00.480" Score="1" ViewCount="1078" Body="&lt;p&gt;I am using a Canon MG 5250 wireless all-in-one printer/scanner. While the printer is detected without any problem and all printing functions work out of the box, the scanner is not working at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using simple scan, which results in an error stating that no scanner is connected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to install any additional drivers or something? Before upgrading to Loki the scanner/printer functions worked both out of the box in Freya...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking forward to your answers... Thank you.&lt;/p&gt;&#xA;" OwnerUserId="4071" LastActivityDate="2016-09-28T15:48:13.767" Title="Loki: Canon Pixma MG 5250 Scanner not working/detected" Tags="|release-loki|printer|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8228" PostTypeId="2" ParentId="8225" CreationDate="2016-09-27T08:33:33.910" Score="2" Body="&lt;p&gt;To get the scanner to work you have to download and install the &lt;a href=&quot;http://www.canon-europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mg_series/pixma_mg5250.aspx?type=drivers&amp;amp;language=EN&amp;amp;os=Linux%20(64-bit)&quot; rel=&quot;nofollow&quot;&gt;drivers from canon&lt;/a&gt;. This also supplies a scanner program that should work with your scanner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation is done by untarring the downloaded file by right clicking on it and selecting expand here (could be slightly different as i am translating from a dutch system). This will create a new folder in the same folder as the downloaded file with the same name as the filename of the download. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This folder contains a couple of files. select the one ending with -deb.tar.gz. Right click on it and select expand here. This will create a new folder in the same folder you are working in. Right click this folder and select open in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will again create a new folder in the folder you are working in. Right click this folder and select open in, and terminal in the menu that appears. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ./install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in the terminal and press enter. Enter your password when prompted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can scan using the program canon provided, unfortunately the build in scanner program won't work, and the canon program won't appear in the applications menu. To start the canon program open the terminal from the menu. In the terminal type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scangearmp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and press enter. The canon program will open and should find your scanner.&lt;/p&gt;&#xA;" OwnerUserId="124" LastActivityDate="2016-09-27T08:33:33.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8229" PostTypeId="2" ParentId="7628" CreationDate="2016-09-27T09:10:05.490" Score="12" Body="&lt;p&gt;Just in case someone else stumbles upon this issue, I managed to address my media keys issue with elementaryos loki by using dconf-editor and xbindkeys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First to identify your keys in terminal type &lt;code&gt;sudo xbindkeys -k&lt;/code&gt; and press the the bind key on your keyboard and/or click under the window. You can use one of the two lines after &lt;em&gt;&quot;NoCommand&quot;&lt;/em&gt;&#xA;in &lt;code&gt;~/.xbindkeysrc&lt;/code&gt; to bind a key.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;(Scheme function)&quot;&#xA;m:0x0 + c:123&#xA;XF86AudioRaiseVolume&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you've found your key name such as &lt;em&gt;&quot;XF86AudioRaiseVolume&quot;&lt;/em&gt; in this case, open dconf-editor and navigate to: &#xA;&lt;em&gt;org &gt; gnome &gt; settings-daemon &gt; plugins &gt; media-keys&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look for your desired media key, such as &lt;em&gt;&quot;volume-up&quot;&lt;/em&gt; in the this case and assign the value you get from xbindkeys before &lt;em&gt;&quot;XF86AudioRaiseVolume&quot;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The media-keys started working immediately for me after putting in the correct bindings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Love eOS!&lt;/p&gt;&#xA;" OwnerUserId="6200" LastEditorUserId="5722" LastEditDate="2016-09-27T16:43:53.990" LastActivityDate="2016-09-27T16:43:53.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8231" PostTypeId="1" AcceptedAnswerId="8245" CreationDate="2016-09-27T10:54:49.490" Score="1" ViewCount="666" Body="&lt;p&gt;I've got elementary OS 0.4 Loki and it doesn't shut down (black screen with white cursor). The same sometimes occurs with screen lock. Touchpad is sometimes turning off and sometimes the Linux bricks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've looked dmesg a few times, but how can I repair it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dmesg: &lt;a href=&quot;http://pastebin.com/mnYWMUZM&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com/mnYWMUZM&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kernel version: 4.8.0-040800rc8-generic. (I can't install older kernel than 4.8, because x.org server is bugged and it's making my fans spin very fast)&lt;/p&gt;&#xA;" OwnerUserId="6627" LastEditorUserId="26" LastEditDate="2016-09-27T16:44:30.703" LastActivityDate="2016-09-27T17:32:57.270" Title="elementary OS doesn't shut down" Tags="|kernel|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8232" PostTypeId="2" ParentId="8128" CreationDate="2016-09-27T11:00:42.917" Score="2" Body="&lt;p&gt;It's apparently a known bug, you can try what I explained here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7897/significant-lag-loading-panel-and-dock-after-login-loki&quot;&gt;Significant lag loading panel and dock after login (Loki)&lt;/a&gt;&#xA;to temporarily avoid to reboot&lt;/p&gt;&#xA;" OwnerUserId="6433" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-27T11:00:42.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8233" PostTypeId="1" AcceptedAnswerId="8335" CreationDate="2016-09-27T11:56:43.840" Score="1" ViewCount="1689" Body="&lt;p&gt;I am not new to linux.&#xA;First of all i have to say that i've installed it on my work laptop (sysadmin) which i use with 2 additional monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The layout is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;left monitor - additional monitor - clockwise rotated&lt;/li&gt;&#xA;&lt;li&gt;center monitor - laptop's build-in monitor - no rotation&lt;/li&gt;&#xA;&lt;li&gt;right monitor - additional monitor - no rotation.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The problem is that in System settings -&gt; Displays i can arrange this layout BUT i cannot stick together the left and the center monitors (pic attached).&#xA;If i move the left monitor so that it is sticked to the center one the &quot;Apply&quot; button remains grayed out.&#xA;This is pretty annoying because the gap between the 2 monitors is pretty big.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Image:&#xA;&lt;a href=&quot;https://owc.darman.ro/index.php/s/codAbnH9W4YelhR&quot; rel=&quot;nofollow&quot;&gt;https://owc.darman.ro/index.php/s/codAbnH9W4YelhR&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can i configure the monitor layout from somewhere else or how can i fix this?&lt;/p&gt;&#xA;" OwnerUserId="6628" LastEditorUserId="37" LastEditDate="2016-09-29T10:25:05.970" LastActivityDate="2018-03-17T23:16:15.647" Title="Display layout problem with 3 monitor screens" Tags="|release-loki|display|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8236" PostTypeId="1" CreationDate="2016-09-27T13:25:03.067" Score="0" ViewCount="696" Body="&lt;p&gt;In network-manager i can only select wireless and wired networks as well as hidden but not VPN. To connect to VPN I have to go to system settings and connect from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I add VPN menu option in network-manager?&#xA;On another note does anyone know how to add support for L2TP VPN?&lt;/p&gt;&#xA;" OwnerUserId="6200" LastActivityDate="2016-09-27T15:28:14.727" Title="Loki - no VPN connections in network-manager tray applet" Tags="|networking|wingpanel|vpn|" AnswerCount="1" CommentCount="1" ClosedDate="2016-09-27T16:46:02.580" ContentLicense="CC BY-SA 3.0" />
  <row Id="8238" PostTypeId="1" AcceptedAnswerId="8801" CreationDate="2016-09-27T13:47:40.083" Score="7" ViewCount="2807" Body="&lt;p&gt;Everytime I open Chrome a window pops-up (see below) and asks me to set up a new keyring. I did a quick research and learned that it might happen because user login is disabled on start. I switched that on but still got the same pop-up. How can I remove/turn off/disable it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EPx8c.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EPx8c.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6573" LastActivityDate="2016-10-20T15:17:12.623" Title="How can I turn off the new keyring pop-up window?" Tags="|release-loki|google-chrome|elementary-website|keyring|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8239" PostTypeId="2" ParentId="8231" CreationDate="2016-09-27T14:03:29.910" Score="1" Body="&lt;p&gt;Found answer here (missing some arguments in grub): &lt;a href=&quot;https://elementaryforums.com/index.php?threads/elementary-os-not-running-properly.2081/#post-2650&quot; rel=&quot;nofollow&quot;&gt;https://elementaryforums.com/index.php?threads/elementary-os-not-running-properly.2081/#post-2650&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6627" LastActivityDate="2016-09-27T14:03:29.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8240" PostTypeId="2" ParentId="3251" CreationDate="2016-09-27T14:06:30.553" Score="2" Body="&lt;p&gt;For what it's worth, elementary comes with an SSH client (as do most flavors of Linux). You can start an SSH session by opening Terminal and running the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ssh your-username@name-of-server.com&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-09-27T14:06:30.553" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8241" PostTypeId="2" ParentId="8236" CreationDate="2016-09-27T15:28:14.727" Score="2" Body="&lt;p&gt;Its on the wishlist:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-network/+bug/1489486&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/wingpanel-indicator-network/+bug/1489486&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like its not coming anytime soon tho :((&lt;/p&gt;&#xA;" OwnerUserId="6631" LastActivityDate="2016-09-27T15:28:14.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8242" PostTypeId="2" ParentId="8218" CreationDate="2016-09-27T15:44:37.793" Score="1" Body="&lt;p&gt;You haven't allocated enough space for your &lt;code&gt;boot&lt;/code&gt; partition (where the kernel goes). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot into a live session with the elementary installer, and then follow &lt;a href=&quot;https://partedmagic.com/using-gparted/&quot; rel=&quot;nofollow&quot;&gt;this tutorial&lt;/a&gt; to shrink your &lt;code&gt;root&lt;/code&gt; partition to free up some room, and then resize the &lt;code&gt;boot&lt;/code&gt; partition so it is around 500MB.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2016-09-27T18:05:29.670" LastActivityDate="2016-09-27T18:05:29.670" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8243" PostTypeId="2" ParentId="8218" CreationDate="2016-09-27T17:20:17.770" Score="1" Body="&lt;p&gt;Your &lt;code&gt;/boot&lt;/code&gt; partition will be locked in &lt;code&gt;gparted&lt;/code&gt; while your operating system is running (as the partition is mounted and in use). Instead, boot into &lt;a href=&quot;http://gparted.org/livecd.php&quot; rel=&quot;nofollow&quot;&gt;a &quot;live CD&quot; (or drive)&lt;/a&gt; to modify the partition while the operating system is not in use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll want at least twice as much space in your boot partition (~500 MB), and you could probably size down that EFI partition (Ubuntu &lt;a href=&quot;https://help.ubuntu.com/community/DiskSpace&quot; rel=&quot;nofollow&quot;&gt;recommends&lt;/a&gt; 100-250 MB instead of your 512 MB). And this should go without saying, but &lt;strong&gt;remember to backup&lt;/strong&gt; any important data before proceeding in case you mess up your drive.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-27T17:20:17.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8244" PostTypeId="1" AcceptedAnswerId="10991" CreationDate="2016-09-27T17:32:23.513" Score="5" ViewCount="727" Body="&lt;p&gt;I am aware this doesn't look like elementary-specific but more like a Firefox specific thing, but in fact I only see this with Firefox in elementary OS Loki. It didn't happened in Freya, it doesn't happen with the same Firefox version (49.00) on another ubuntu-16.04-based system I have, and it doesn't happen in other browsers Firefox-forks like Palemoon or Icecat on Loki, but it happens in other versions of Firefox that I tested on Loki, namely thhe nightly build.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox is not able to remember the last download location.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox has two options for downloading: a stable automatic location or the option to ask for the download location each time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lmo3K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lmo3K.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want it to ask me where to download (instead of &lt;em&gt;automatically&lt;/em&gt; downloading in the same location) but to offer me &lt;strong&gt;the last&lt;/strong&gt; used location. (e.g. if last time I have downloaded in Pictures, next time I want to see that as first location offered).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the expected behavior,  was always the case and it is in other systems as I mentioned.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;More details:&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to download some images one after the other, from different websites, one from each website. (I search Google images for &quot;maps of Greece&quot; and I get multiple images on various websites.) When I download them by 'save image as', the download location proposed is always my home directory, &lt;code&gt;~./&lt;/code&gt; and I have to go each time deep into my directory structure where I want them saved, while normally the second time (at least when the image is the same format) the last selected location should be proposed.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Creating a new empty profile: the same happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Testing with the nightly version: the same happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even downloading multiple times the same image and choosing a different location, the same location is opened by default again and again: the home directory. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FOrTl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FOrTl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vkGpC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vkGpC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can change this location and download, but next time I am shown this again, instead of the expected last used location.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;UPDATE:&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I have tested &lt;strong&gt;older versions of Firefox in Loki and the problem is absent&lt;/strong&gt;. So, there is a problem with Firefox 49.0, but I have it in Loki only and not in Linux Mint 18 (16.04-based too) with this version of Firefox.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Firefox version 45.0 and older is NOT affected&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Firefox nightly 52.0 is also affected&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Firefox 46.0 is already affected - just like 47, 48, 49, 50 and the present nightly 53.0a1.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;This only affects Pantheon Files with Firefox version 46 and newer, while other file managers are not affected&lt;/strong&gt; (as indicated in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8955/170&quot;&gt;this&lt;/a&gt; answer). &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I have made a bug report &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1644854&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-04T12:51:32.737" Title="Firefox doesn't remember the last download location in Loki" Tags="|firefox|download|" AnswerCount="3" CommentCount="6" ClosedDate="2019-04-19T21:08:23.530" ContentLicense="CC BY-SA 3.0" />
  <row Id="8245" PostTypeId="2" ParentId="8231" CreationDate="2016-09-27T17:32:57.270" Score="2" Body="&lt;p&gt;Solved by Paradise &lt;a href=&quot;https://elementaryforums.com/index.php?threads/elementary-os-not-running-properly.2081/#post-2650&quot; rel=&quot;nofollow noreferrer&quot;&gt;at Elementaryforums&lt;/a&gt; (paraphrased):&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I had the same 100% fan-speed issue with my Asus notebook. There is a workaround for this: just add &lt;code&gt;acpi_osi=!&lt;/code&gt; in your GRUB. While booting with kernel 4.4, press &amp;quot;e&amp;quot; for &amp;quot;edit&amp;quot; and type in like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VkVZM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VkVZM.jpg&quot; alt=&quot;Linux_GRUB_Kernel_options_set_nomodeset_modeset_acpi2-GRUB&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After booting, the fan control works correctly but now you must add this workaround in &lt;code&gt;/etc/default/grub&lt;/code&gt; ... for future reboots:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9a8mM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9a8mM.jpg&quot; alt=&quot;etc_grub_default&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gedit&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gksudo gedit /etc/default/grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;... Kernel 4.4 is more stable and tested&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-27T17:32:57.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8246" PostTypeId="1" AcceptedAnswerId="8247" CreationDate="2016-09-27T17:56:04.037" Score="1" ViewCount="103" Body="&lt;p&gt;I want to use Seamonkey, that normally is simply to be run with &lt;code&gt;./seamonkey&lt;/code&gt; or dropping the executable in a terminal, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I get this wrror:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./seamonkey&#xA;XPCOMGlueLoad error for file /home/cipeos/programs/seamonkey (2)/libxul.so:&#xA;libdbus-glib-1.so.2: cannot open shared object file: No such file or directory&#xA;Couldn't load XPCOM. &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That file is set to be executable.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-09-27T18:53:26.370" Title="How to launch Seamonkey?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8247" PostTypeId="2" ParentId="8246" CreationDate="2016-09-27T18:07:14.153" Score="1" Body="&lt;p&gt;To solve the &lt;code&gt;libdbus-glib-1-2&lt;/code&gt; error, make sure it's &lt;a href=&quot;http://el.web.id/how-to-solve-xpcomglueload-error-couldnt-load-xpcom-mozilla-firefox-debian-149&quot; rel=&quot;nofollow noreferrer&quot;&gt;up to date&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libdbus-glib-1-2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The issue is more likely (in 2016) that Seamonkey gave you the wrong installer. The 64-bit version is &lt;a href=&quot;http://www.seamonkey-project.org/releases/#contrib&quot; rel=&quot;nofollow noreferrer&quot;&gt;hidden at the bottom of the download page&lt;/a&gt;. Be sure to use that x86_64 tar if you are using a 64-bit operating system (like Loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/c2cu3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c2cu3.png&quot; alt=&quot;download page&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, use &lt;a href=&quot;https://askubuntu.com/a/397654/49899&quot;&gt;the Ubuntuzilla repo install method&lt;/a&gt; or &lt;a href=&quot;https://sourceforge.net/projects/ubuntuzilla/files/mozilla/apt/pool/main/s/seamonkey-mozilla-build/&quot; rel=&quot;nofollow noreferrer&quot;&gt;the deb files&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-27T18:53:26.370" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8249" PostTypeId="2" ParentId="5216" CreationDate="2016-09-27T19:11:45.913" Score="1" Body="&lt;p&gt;Have you tried connecting with MTP? Install &lt;code&gt;mtpfs&lt;/code&gt; with &lt;code&gt;sudo apt install mtpfs&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1145/5565&quot;&gt;KDE Connect&lt;/a&gt; to communicate between your device and computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, this isn't the only report we've seen of Android phone/tablet detection issues in Files, so I've &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1346264&quot; rel=&quot;nofollow noreferrer&quot;&gt;reopened the issue in our bug tracker&lt;/a&gt;. Please follow its progress there in case the devs need more information, but I'll also report back here.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-09-27T19:21:03.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8250" PostTypeId="5" CreationDate="2016-09-27T19:16:28.533" Score="0" Body="&lt;p&gt;Nautilus is the standard Ubuntu file browser. elementary OS's file browser is pantheon-files&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2016-09-27T21:28:35.493" LastActivityDate="2016-09-27T21:28:35.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8251" PostTypeId="4" CreationDate="2016-09-27T19:16:28.533" Score="0" Body="The standard Ubuntu file browser. Note that the elementary OS file browser is pantheon-files." OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2016-09-27T21:28:56.907" LastActivityDate="2016-09-27T21:28:56.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8252" PostTypeId="2" ParentId="7079" CreationDate="2016-09-27T19:54:36.147" Score="2" Body="&lt;p&gt;To open your Trash in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8021/5565&quot;&gt;a window with superuser powers&lt;/a&gt; in Loki, run&lt;/p&gt;&#xA;&lt;h3&gt;&lt;code&gt;sudo -i pantheon-files /home/$USER/.local/share/Trash/files/&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;p&gt;This command runs your files program (&lt;code&gt;pantheon-files&lt;/code&gt;) as the root user (&lt;code&gt;sudo&lt;/code&gt;) in the root's environment (&lt;a href=&quot;https://askubuntu.com/q/70534/49899&quot;&gt;&lt;code&gt;-i&lt;/code&gt;&lt;/a&gt;) at the specified directory (your personal Trash folder). No need to change &lt;code&gt;$USER&lt;/code&gt;, which will automatically translate to your current username.&lt;/p&gt;&#xA;&lt;p&gt;From this window, you should be able to move your files as you please.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-27T19:54:36.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8253" PostTypeId="2" ParentId="7410" CreationDate="2016-09-27T19:57:37.480" Score="0" Body="&lt;p&gt;none of the f1 and f7 workarounds worked for me. Freya on a chromebook. If you are like me, try opening a you tube video any one will do and move the mouse around a bit. Then it will appear.&lt;/p&gt;&#xA;" OwnerUserId="6635" LastActivityDate="2016-09-27T19:57:37.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8254" PostTypeId="5" CreationDate="2016-09-27T19:58:36.183" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-09-27T19:58:36.183" LastActivityDate="2016-09-27T19:58:36.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8255" PostTypeId="4" CreationDate="2016-09-27T19:58:36.183" Score="0" Body="about the Trash function within [tag:pantheon-files]" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-27T21:28:09.503" LastActivityDate="2016-09-27T21:28:09.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8258" PostTypeId="1" CreationDate="2016-09-27T22:02:36.053" Score="1" ViewCount="471" Body="&lt;p&gt;I have an old Dell Intel Pentium 4 2.53GHz (Northwood B?), 1 GB ram, and its hardware is good. &lt;a href=&quot;https://i.stack.imgur.com/AWd7S.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AWd7S.jpg&quot; alt=&quot;yeah baby&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want to wipe the whole damn thing (after dumping files, etc.) It is obviously not a dual core 64-bit processor—does this mean I should just stick with Xubuntu?  I would PREFER Loki!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for taking the time to point me in right direction.&lt;/p&gt;&#xA;" OwnerUserId="6639" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:00.527" LastActivityDate="2016-09-29T22:19:49.817" Title="Install Loki in Pentium 4 machine" Tags="|release-loki|system-installation|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8259" PostTypeId="5" CreationDate="2016-09-27T22:52:58.397" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://launchpad.net/appcenter&quot; rel=&quot;nofollow&quot;&gt;AppCenter&lt;/a&gt; is a native GTK+ app store built on AppStream and PackageKit. &lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-27T23:47:19.920" LastActivityDate="2016-09-27T23:47:19.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8260" PostTypeId="4" CreationDate="2016-09-27T22:52:58.397" Score="0" Body="The elementary OS app store (replaces the Ubuntu Software Center)." OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2016-09-27T23:47:14.783" LastActivityDate="2016-09-27T23:47:14.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8261" PostTypeId="2" ParentId="8258" CreationDate="2016-09-27T23:09:00.947" Score="2" Body="&lt;p&gt;Loki (elementary OS 0.4) does not support 32-bit processors such as yours, but the previous version (Freya, 0.3) does. Still, I wouldn't expect it to run well since the processor is &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8266/5565&quot;&gt;below system recommendations&lt;/a&gt; and since Freya will only be supported slightly longer. Luna (0.2) is a better fit for your hardware, but I wouldn't recommend using unsupported software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally, I think you would be better off with a distro optimized specifically for older hardware, but if you're feeling bold, why not give Freya a shot? You can &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8269/5565&quot;&gt;find a copy here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-09-28T01:08:58.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8264" PostTypeId="1" CreationDate="2016-09-28T00:38:47.010" Score="1" ViewCount="41" Body="&lt;p&gt;I'm a big fan of Elementary OS and have been around since Freya. Recently loaded Loki to a new development box... I think it's great (after a bit of tweaking: ppa, gdebi, etc). Updates are current as of this posting. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please take anything that appears to be critical with a grain of salt. Love the OS. Everything is mostly fast, sweet and very well designed. Not going anywhere... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, I've had a strange recurring gui issue with Geary/Pantheon-Mail across both releases. Massive stretching that makes Mail impossible to use. Popped up after a few days on Freya, took a week or so to happen with Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Interesting differences: Freya stretching occurred instantly (when it occurred); it was also very large, horizontally (can't really guess at the pixel width). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki Mail stretched almost comically: it started loading, then started stretching in front of my eyes like Stretch Armstrong (image below). I really like the email client itself, so it would be great if we could figure this out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a GTK issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the money, with a terminal for scale:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YhLOw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YhLOw.png&quot; alt=&quot;Mail stretch in Loki&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6643" LastActivityDate="2016-09-28T00:38:47.010" Title="Mail gui stretching (Freya/Loki)" Tags="|release-loki|pantheon-mail|" AnswerCount="0" CommentCount="7" ClosedDate="2016-10-09T00:15:08.857" ContentLicense="CC BY-SA 3.0" />
  <row Id="8266" PostTypeId="1" AcceptedAnswerId="8267" CreationDate="2016-09-28T00:49:09.473" Score="2" ViewCount="17941" Body="&lt;p&gt;I don't see a record on the website of the differences in minimum/recommended system requirements between elementary OS releases (Luna 0.2, Freya 0.3, and Loki 0.4). Are they the same between releases?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T00:49:09.473" Title="How do the system requirements compare between elementary OS releases?" Tags="|release-freya|release-loki|system-installation|hardware|luna|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8267" PostTypeId="2" ParentId="8266" CreationDate="2016-09-28T00:49:09.473" Score="3" Body="&lt;p&gt;Support for the previous elementary OS release &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/22rhi3/how_long_is_luna_supported_for/&quot; rel=&quot;nofollow&quot;&gt;quickly wanes after the next's release&lt;/a&gt;, though the release's base Ubuntu is supported five years from its release (see &lt;a href=&quot;https://en.wikipedia.org/wiki/Ubuntu_version_history#Table_of_versions&quot; rel=&quot;nofollow&quot;&gt;this table&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;&lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow&quot;&gt;Loki (0.4)&lt;/a&gt;&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;Based on Ubuntu 16.04 LTS Xenial Xerus&lt;/sup&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Same as Freya&lt;/strong&gt;, but no longer supports 32-bit processors (only 64-bit)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20160416153313/http://elementary.io/en/docs/installation#installation&quot; rel=&quot;nofollow&quot;&gt;Freya (0.3)&lt;/a&gt;&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;Based on Ubuntu 14.04 LTS Trusty Tahr&lt;/sup&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Recommended System Specifications&lt;/strong&gt; [&lt;em&gt;Note: Still supports 32-bit processors&lt;/em&gt;]&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;  &lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;  &lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;  &lt;li&gt;Internet access&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h1&gt;&lt;a href=&quot;https://web.archive.org/web/20150217150054/http://elementary.io/docs/user-guide/technical-specifications&quot; rel=&quot;nofollow&quot;&gt;Luna (0.2)&lt;/a&gt;&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;Based on Ubuntu 12.04 LTS Precise Pangolin&lt;/sup&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Minimum System Requirements&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;1 GHz x86 processor&lt;/li&gt;&#xA;  &lt;li&gt;512MB of system memory (RAM)&lt;/li&gt;&#xA;  &lt;li&gt;5GB of disk space&lt;/li&gt;&#xA;  &lt;li&gt;Graphics card and display capable of at least 1024x768&lt;/li&gt;&#xA;  &lt;li&gt;CD/DVD drive or ability to boot to a USB drive&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;  &#xA;  &lt;p&gt;Users may be able to install Luna on devices that do not meet these requirements, but the experience is likely to suffer.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;System Recommendations&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;1 GHz x86 processor&lt;/li&gt;&#xA;  &lt;li&gt;1GB of system memory (RAM)&lt;/li&gt;&#xA;  &lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;  &lt;li&gt;Graphics card and display capable of at least 1024x768&lt;/li&gt;&#xA;  &lt;li&gt;3D compositing&lt;/li&gt;&#xA;  &lt;li&gt;CD/DVD Drive or ability to boot to a USB drive&lt;/li&gt;&#xA;  &lt;li&gt;Internet access&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;h1&gt;Jupiter (0.1)&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1719268&quot; rel=&quot;nofollow&quot;&gt;Unlisted&lt;/a&gt;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T00:49:09.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8268" PostTypeId="2" ParentId="8165" CreationDate="2016-09-28T00:50:21.647" Score="0" Body="&lt;p&gt;I use this one with all Ubuntu based Distros and it has worked every time.&#xA;I tried it on Loki but couldn't manage to get it done. I don't know if it was because they removed the debi or something.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hanipouspilot/rtlwifi&#xA;sudo apt-get update&#xA;sudo apt-get install rtlwifi-new-dkms linux-firmware&#xA;sudo reboot now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you make it work I'm sure it'll help you, I'm currently using it on Linux Mint 18 and it Works absolutely PERFECTLY. BTW, if you manage to get it to work can you please tell me how? :D&lt;/p&gt;&#xA;" OwnerUserId="6644" LastEditorUserId="565" LastEditDate="2016-12-22T17:05:34.000" LastActivityDate="2016-12-22T17:05:34.000" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8269" PostTypeId="1" AcceptedAnswerId="8270" CreationDate="2016-09-28T01:06:20.277" Score="14" ViewCount="17087" Body="&lt;p&gt;It looks like the team killed the old release downloads &lt;a href=&quot;https://web.archive.org/web/20160201005339/http://sourceforge.net/projects/elementaryos/files/?source=navbar&quot;&gt;on SourceForge&lt;/a&gt; and &lt;a href=&quot;https://web.archive.org/web/20160220093000/https://old.elementary.io/&quot;&gt;their website&lt;/a&gt;. Where can I find copies of older versions of this libre, open source software?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2018-12-08T21:16:48.067" Title="Where can I download older versions of elementary OS?" Tags="|release-freya|system-installation|luna|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8270" PostTypeId="2" ParentId="8269" CreationDate="2016-09-28T01:06:20.277" Score="15" Body="&lt;p&gt;Please keep in mind that elementary supports its penultimate releases &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8266/5565&quot;&gt;only slightly into its current release's life&lt;/a&gt;. The older software below is unsupported by the developers and is provided here primarily for purposes of history and curiosity.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;A librarian once told me about the lifecycle of periodicals. At first, they are common, used, and after some time, they lose their currency and are discarded. Then they become rare and mainly curios for historians. Looks like we're nearing that latter half already.&lt;/p&gt;&#xA;&lt;p&gt;So &lt;a href=&quot;https://distrowatch.com/table.php?distribution=elementary&quot; rel=&quot;noreferrer&quot;&gt;the DistroWatch links&lt;/a&gt; are down—elementary isn't hosting these anymore—and the major distro archives (&lt;a href=&quot;https://archive.org/details/linux_distributions&quot; rel=&quot;noreferrer&quot;&gt;the Internet Archive distro collection&lt;/a&gt; and &lt;a href=&quot;http://distro.ibiblio.org&quot; rel=&quot;noreferrer&quot;&gt;http://distro.ibiblio.org&lt;/a&gt;) do not carry it. Until they do, the best way to get these will be by torrent. Be sure to check the torrents against their hashes to verify their authenticity by running the command below each section.&lt;/p&gt;&#xA;&lt;h2&gt;Loki 0.4.1 (64-bit)&lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sha256sum elementaryos-0.4.1-stable.20180214.iso&#xA;5c499579e6ba05eed5626abbbb68fc1e3660e23ccb6a27f1a5f7794fed98bd56&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;magnet:?xt=urn:btih:54dca0477d74d88ed051a9cd62fe5359151e7823&amp;amp;dn=elementaryos-0.4.1-stable.20180214.iso&amp;amp;tr=https%3A%2F%2Fashrise.com%3A443%2Fphoenix%2Fannounce&amp;amp;tr=udp%3A%2F%2Fopen.demonii.com%3A1337%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&lt;/p&gt;&#xA;&lt;h2&gt;&lt;a href=&quot;http://linuxtracker.org/index.php?page=torrent-details&amp;amp;id=535c241c5b14fdfe47bec6cbaac4a39cd41c719e&quot; rel=&quot;noreferrer&quot;&gt;Loki 0.4 (64-bit)&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sha256sum elementaryos-0.4-stable-amd64.20160921.iso&lt;/code&gt;&#xA;&lt;a href=&quot;https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;8035e0a2fbc977d931af22dcefb77ed6fe87815d89188a43e2cb345f13e629cf&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;&lt;a href=&quot;http://linuxtracker.org/index.php?page=torrent-details&amp;amp;id=fce720af722a813a184c5550a924aaa60a8d9af1&quot; rel=&quot;noreferrer&quot;&gt;Freya 0.3.2 (64-bit)&lt;/a&gt; &lt;a href=&quot;http://linuxtracker.org/index.php?page=torrent-details&amp;amp;id=001b104e49d517cf7a41593a73c3861b7c8e34f8&quot; rel=&quot;noreferrer&quot;&gt;(32-bit)&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://linux.softpedia.com/get/System/Operating-Systems/Linux-Distributions/Elementary-OS-67717.shtml&quot; rel=&quot;noreferrer&quot;&gt;Softpedia&lt;/a&gt; also has a mirror of the latest Freya ISOs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sha256sum elementaryos-0.3.2-stable-amd64.20151209.iso&lt;/code&gt;&#xA;&lt;a href=&quot;https://web.archive.org/web/20160416153313/http://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;ee737ffa6bf33b742c5a7cee17aa26dec5ee3b573cbbc4b53cbe2a2513c9197a&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sha256sum elementaryos-0.3.2-stable-i386.20151209.iso&lt;/code&gt;&#xA;&lt;a href=&quot;https://web.archive.org/web/20160416153313/http://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;97e143e762a1d1e3abac9eba33a59a7a6b9f319a7063cd47e406678c379fc683&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Luna 0.2&lt;/h2&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Assorted mirrors: &lt;a href=&quot;http://iso.linuxquestions.org/element/elementary-os-0.2/#torrent&quot; rel=&quot;noreferrer&quot;&gt;unchecked torrent links&lt;/a&gt;, &lt;a href=&quot;http://www.virtualpanic.com/isos/Linux/Elementary%20OS/2013/&quot; rel=&quot;noreferrer&quot;&gt;virtual panic&lt;/a&gt;, &lt;a href=&quot;https://docs.google.com/file/d/0B9M1TKaD_dgIQWVWVzRqUUhLUkk/view&quot; rel=&quot;noreferrer&quot;&gt;Google Drive&lt;/a&gt;, &lt;a href=&quot;http://ftp.riken.jp/Linux/simosnet-livecd/elementaryos/&quot; rel=&quot;noreferrer&quot;&gt;simosnet-livecd&lt;/a&gt;, &lt;a href=&quot;http://simosnet.com/livecd/elementaryos/&quot; rel=&quot;noreferrer&quot;&gt;mirror&lt;/a&gt;, &lt;a href=&quot;http://repo.unnes.ac.id/iso/elementaryos/&quot; rel=&quot;noreferrer&quot;&gt;ac.id&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sha256sum elementaryos-stable-amd64.20130810.iso&lt;/code&gt;&#xA;&lt;a href=&quot;https://web.archive.org/web/20130814121430/http://elementaryos.org/answers/what-are-the-checksums-for-the-elementary-luna-isos&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;bfd2d56ec2936e7634f466372be6c839af12a8f7df956c0989664dcf9029da18&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sha256sum elementaryos-stable-i386.20130810.iso&lt;/code&gt;&#xA;&lt;a href=&quot;https://web.archive.org/web/20130814121430/http://elementaryos.org/answers/what-are-the-checksums-for-the-elementary-luna-isos&quot; rel=&quot;noreferrer&quot;&gt;&lt;code&gt;fb00edb0037e3ed6e4d15e035bd9e450e148c1aa18a15e26c839fb550e075051&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Jupiter (0.1) at &lt;a href=&quot;https://archive.org/details/ElementaryOs-Jupiter&quot; rel=&quot;noreferrer&quot;&gt;the Internet Archive&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;p&gt;Remember: Lots of copies keeps stuff safe&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-12-08T21:16:48.067" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="8271" PostTypeId="1" CreationDate="2016-09-28T01:10:16.043" Score="2" ViewCount="235" Body="&lt;p&gt;Is it possible to embed image in elementary OS Mail while writing email? I didn't find any option to do it? Does anyone know?&lt;/p&gt;&#xA;" OwnerUserId="6645" LastEditorUserId="68" LastEditDate="2016-10-01T22:35:17.473" LastActivityDate="2016-10-01T22:35:17.473" Title="How to embed image in elementary OS Loki Mail email compose?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8272" PostTypeId="2" ParentId="8271" CreationDate="2016-09-28T01:40:36.240" Score="2" Body="&lt;p&gt;Unfortunately, embedded images are not a feature of Pantheon Mail (formerly Geary). You can follow &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1543630&quot; rel=&quot;nofollow&quot;&gt;the wishlist request in the bug tracker here&lt;/a&gt; or &lt;a href=&quot;https://www.bountysource.com/issues/30707007-unable-to-paste-image-to-email-body&quot; rel=&quot;nofollow&quot;&gt;post a bounty&lt;/a&gt; to encourage a developer to write the feature.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="160" LastEditDate="2016-09-28T13:13:04.937" LastActivityDate="2016-09-28T13:13:04.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8273" PostTypeId="5" CreationDate="2016-09-28T01:41:44.427" Score="0" Body="&lt;p&gt;Pantheon Mail (formerly Geary) is the standard email client in elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T13:00:39.590" LastActivityDate="2016-09-28T13:00:39.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8274" PostTypeId="4" CreationDate="2016-09-28T01:41:44.427" Score="0" Body="default email client in elementary OS (formerly known as Geary)" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:20.963" LastActivityDate="2016-09-28T23:32:20.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8275" PostTypeId="1" CreationDate="2016-09-28T02:34:02.093" Score="-2" ViewCount="803" Body="&lt;p&gt;i'm having problems installing elementary os freya 32 bits, i have a really older laptop from a little cousin and want to install elementary, i'm using rufus to create the bootable usb and install it, but i'm stuck at elementary logo, and having some SQUASHFS errors, i have a hp laptop with elementary freya running just fine, but in this one nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. i know how to install linux based operative systems but still i'm not a linux daily user, so i'm not too familiar with troubleshooting methods or how to fix problems&lt;/p&gt;&#xA;" OwnerUserId="6646" LastEditorUserId="5565" LastEditDate="2016-09-28T13:00:49.743" LastActivityDate="2016-09-30T07:59:40.847" Title="Error SQUASHFS?" Tags="|release-freya|system-installation|boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8276" PostTypeId="5" CreationDate="2016-09-28T03:42:51.793" Score="0" Body="&lt;p&gt;GNOME Terminal is a terminal emulator for the &lt;a href=&quot;/questions/tagged/gnome&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;gnome&amp;#39;&quot; rel=&quot;tag&quot;&gt;gnome&lt;/a&gt; desktop environment. For questions about elementary OS's default terminal, Pantheon Terminal, use &lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T13:00:31.293" LastActivityDate="2016-09-28T13:00:31.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8277" PostTypeId="4" CreationDate="2016-09-28T03:42:51.793" Score="0" Body="Ubuntu's default terminal  used to enter text commands. For questions about elementary OS's default terminal, Pantheon Terminal, use the [terminal] tag." OwnerUserId="5565" LastEditorUserId="8517" LastEditDate="2019-12-31T05:13:42.910" LastActivityDate="2019-12-31T05:13:42.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8278" PostTypeId="5" CreationDate="2016-09-28T03:45:59.633" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-09-28T03:45:59.633" LastActivityDate="2016-09-28T03:45:59.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8279" PostTypeId="4" CreationDate="2016-09-28T03:45:59.633" Score="0" Body="for video games in relation to the elementary OS" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T23:31:54.977" LastActivityDate="2016-09-28T23:31:54.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8280" PostTypeId="5" CreationDate="2016-09-28T03:47:58.433" Score="0" Body="&lt;p&gt;Conky is a visual system monitor drawn in a window of the X environment. For more, see &lt;a href=&quot;https://github.com/brndnmtthws/conky&quot; rel=&quot;nofollow&quot;&gt;GitHub&lt;/a&gt;, &lt;a href=&quot;https://en.wikipedia.org/wiki/Conky_(software)&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T13:00:42.180" LastActivityDate="2016-09-28T13:00:42.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8281" PostTypeId="4" CreationDate="2016-09-28T03:47:58.433" Score="0" Body="a lightweight system monitor for the X Window System" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:03.640" LastActivityDate="2016-09-28T23:32:03.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8282" PostTypeId="5" CreationDate="2016-09-28T03:49:44.843" Score="0" Body="&lt;p&gt;Steam is a digital distribution platform developed by Valve Corporation offering digital rights management (DRM), multiplayer gaming and social networking services. &lt;a href=&quot;https://en.wikipedia.org/wiki/Steam_(software)&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:11.583" LastActivityDate="2016-09-28T23:32:11.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8283" PostTypeId="4" CreationDate="2016-09-28T03:49:44.843" Score="0" Body="a video game platform by Valve Corporation" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-28T13:00:37.127" LastActivityDate="2016-09-28T13:00:37.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8284" PostTypeId="5" CreationDate="2016-09-28T03:53:49.693" Score="0" Body="&lt;p&gt;Audience is elementary OS's default video player application. Follow its development on &lt;a href=&quot;https://launchpad.net/audience&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:04.473" LastActivityDate="2016-10-06T13:20:04.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8285" PostTypeId="4" CreationDate="2016-09-28T03:53:49.693" Score="0" Body="Audience is the default video player application on elementary OS. For questions about video players in general, use the &quot;video-player&quot; tag." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-11-11T10:55:08.150" LastActivityDate="2016-11-11T10:55:08.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8287" PostTypeId="2" ParentId="8275" CreationDate="2016-09-28T06:56:40.180" Score="1" Body="&lt;p&gt;Did you check that the image on your USB drive is not corrupted?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can either use &lt;em&gt;Check disk for defects&lt;/em&gt; in the boot menu and/or you can verify that you can boot from this medium (&lt;em&gt;Try without installing&lt;/em&gt;) works on another computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WwwFn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WwwFn.png&quot; alt=&quot;Check disc for defects&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(You might want to check &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt; as well)&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-09-30T07:59:40.847" LastActivityDate="2016-09-30T07:59:40.847" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8288" PostTypeId="2" ParentId="7825" CreationDate="2016-09-28T08:13:37.610" Score="6" Body="&lt;p&gt;Not quite what you wanted, but here was what I was able to find:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shutdown directly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=org.freedesktop.login1 /org/freedesktop/login1 &quot;org.freedesktop.login1.Manager.PowerOff&quot; boolean:true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot directly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=org.freedesktop.login1 /org/freedesktop/login1 &quot;org.freedesktop.login1.Manager.Reboot&quot; boolean:true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sleep directly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=org.freedesktop.login1 /org/freedesktop/login1 &quot;org.freedesktop.login1.Manager.Suspend&quot; boolean:true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt;&lt;a href=&quot;http://forum.ubuntu-fr.org/viewtopic.php?pid=16497311#p16497311&quot; rel=&quot;nofollow&quot;&gt;Theses commands&lt;/a&gt; will immediately trigger the action without any confirmation dialogue — it's the hook that the dialog box uses.&lt;/sup&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dialog box you're after is known as &lt;strong&gt;EndSessionDialog&lt;/strong&gt;. It's part of &lt;a href=&quot;https://launchpad.net/wingpanel-indicator-session&quot; rel=&quot;nofollow&quot;&gt;Wingpanel's session indicator&lt;/a&gt;. &lt;a href=&quot;http://bazaar.launchpad.net/~wingpanel-devs/wingpanel-indicator-session/trunk/view/head:/src/Widgets/EndSessionDialog.vala&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is where it's built. &lt;a href=&quot;http://bazaar.launchpad.net/~wingpanel-devs/wingpanel-indicator-session/trunk/view/head:/src/Indicator.vala&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is where the indicator calls it. &lt;a href=&quot;http://bazaar.launchpad.net/~wingpanel-devs/wingpanel-indicator-session/trunk/view/head:/src/Services/DbusInterfaces.vala&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is where the indicator interfaces with &lt;code&gt;dbus&lt;/code&gt;. &lt;a href=&quot;http://bazaar.launchpad.net/~wingpanel-devs/wingpanel-indicator-session/trunk/revision/93&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is when &lt;code&gt;org.gnome.SessionManager&lt;/code&gt; was swapped out for &lt;code&gt;org.freedesktop.login1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After much &lt;code&gt;gdbus introspect&lt;/code&gt;ion, I surmise that it's going to be similar to the original &lt;code&gt;dbus&lt;/code&gt; command with &lt;code&gt;/org/gnome/SessionManager&lt;/code&gt; swapped for &lt;code&gt;/org/freedesktop/login1&lt;/code&gt;, but I don't speak the language well enough to find the hook. But I emailed the maintainer so we'll see what we hear back.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorDisplayName="user170" LastEditDate="2016-09-30T23:07:46.403" LastActivityDate="2016-09-30T23:07:46.403" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8289" PostTypeId="1" AcceptedAnswerId="8297" CreationDate="2016-09-28T08:15:12.407" Score="2" ViewCount="1307" Body="&lt;p&gt;I want to setup a network printer and I have the ppd file for it.&#xA;How can I point to my ppd file in setup process?&#xA;I tried cups web interface at localhost:631 but I got &quot;Connection refused&quot; answer.&#xA;I inspected the config, but the &quot;Listen localhost:631&quot; line was not commented so I don't know where can I enable it.&lt;/p&gt;&#xA;" OwnerUserId="6609" LastActivityDate="2016-09-28T10:34:21.963" Title="How can I setup a printer with own ppd file?" Tags="|release-loki|printer|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8290" PostTypeId="1" CreationDate="2016-09-28T08:20:03.313" Score="0" ViewCount="245" Body="&lt;p&gt;I can't install packages because of an unknown error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository -y ppa:otto-kesselgulasch/gimp&#xA;$ sudo apt-get update&#xA;$ sudo apt-get install gimp&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; gimp : Depends: libgimp2.0 (&amp;gt;= 2.8.18) but it is not going to be installed&#xA;        Depends: libgimp2.0 (&amp;lt;= 2.8.18-z) but it is not going to be installed&#xA;        Depends: gimp-data (&amp;gt;= 2.8.18) but it is not going to be installed&#xA;        Depends: gimp-data (&amp;lt;= 2.8.18-z) but it is not going to be installed&#xA;        Depends: libbabl-0.1-0 (&amp;gt;= 0.1.10) but it is not going to be installed&#xA;        Depends: libgegl-0.3-0 (&amp;gt;= 0.3.0) but it is not going to be installed&#xA; xdgurl : Depends: python-tk (&amp;gt;= 2.7.0) but it is not going to be installed&#xA;          Depends: python3-tk (&amp;gt;= 3.2.0) but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6504" LastEditorUserId="26" LastEditDate="2016-10-02T16:08:09.890" LastActivityDate="2016-10-02T16:08:09.890" Title="How do I fix this error when trying to install packages?" Tags="|release-freya|software-installation|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8291" PostTypeId="2" ParentId="7053" CreationDate="2016-09-28T09:06:48.473" Score="2" Body="&lt;p&gt;Loki is still a new release so there are still a lot of bugs worth reporting. Even in attempting to reproduce your situation, I ran into all kinds of non-standard behavior: files that refused to drag, files that copied when they did not show a green &quot;plus&quot; indicator, and so on. It's possible that what you observed is &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+filebug&quot; rel=&quot;nofollow&quot;&gt;a bug to file&lt;/a&gt;. I don't see any bugs like this filed right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short, I was not able to replicate your issue (file, when dragged into folder at same level, creates copy instead of move). I tried several drives, formatted each with NTFS and Ext4 partitions, and dragged a text file around. Pantheon Files consistently copied between partitions and moved within a single partition, no matter the format. Without more context, we would not be able to know whether this is an issue with permissions, NTFS, its interaction with the system, etc. I'd start with comparing the permissions on the two NTFS drives and filing a bug report with screencaptured video. &lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T09:06:48.473" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8292" PostTypeId="2" ParentId="8290" CreationDate="2016-09-28T09:14:34.280" Score="3" Body="&lt;p&gt;The script says &quot;You might want to run 'apt-get -f install' to correct these&quot;. Have you tried running &lt;code&gt;sudo apt-get -f install&lt;/code&gt;? It will attempt to correct broken dependencies. Afterwards, you would want to try to install each of those programs on which GIMP depends (that's what makes them dependencies).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T09:14:34.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8293" PostTypeId="2" ParentId="8290" CreationDate="2016-09-28T09:45:21.987" Score="-1" Body="&lt;p&gt;Try to run &lt;code&gt;sudo apt-get update&lt;/code&gt; then folowed by &lt;code&gt;sudo apt-get install -f&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5813" LastActivityDate="2016-09-28T09:45:21.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8294" PostTypeId="2" ParentId="1899" CreationDate="2016-09-28T10:12:27.770" Score="1" Body="&lt;p&gt;Per &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=647700&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Chromium ticket&lt;/a&gt;, the solution is to use root when setting up CRD.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2018-02-17T16:01:28.917" LastActivityDate="2018-02-17T16:01:28.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8295" PostTypeId="2" ParentId="8044" CreationDate="2016-09-28T10:26:02.560" Score="2" Body="&lt;p&gt;You'll want to access the drives when they're not mounted, so install &lt;code&gt;gparted&lt;/code&gt; on &lt;a href=&quot;http://gparted.org/livecd.php&quot; rel=&quot;nofollow&quot;&gt;a &quot;live CD&quot; or thumb drive&lt;/a&gt;, where you'll be able to toss your swap on one disk and create one on another.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now to &lt;a href=&quot;https://help.ubuntu.com/community/SwapFaq&quot; rel=&quot;nofollow&quot;&gt;activate the partition&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot up elementary OS again and run &lt;code&gt;sudo gparted&lt;/code&gt;. Right-click on the swap drive and go to &quot;Properties&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Copy the partition's UUID.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;sudo nano /etc/fstab&lt;/code&gt; and look at the line with &quot;swap&quot; in its third column. Replace the old UUID with the new one, save, and exit.&lt;/li&gt;&#xA;&lt;li&gt;Enable the swap with &lt;code&gt;sudo swapon --all --verbose&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Confirm its existence with &lt;code&gt;cat /proc/swaps&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;reboot&lt;/code&gt; to make sure it loads&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T10:26:02.560" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8296" PostTypeId="2" ParentId="8289" CreationDate="2016-09-28T10:31:18.690" Score="0" Body="&lt;p&gt;I realized there is no need the possibility the custom ppd file select if I have properly installed driver for that printer. So the elementary's config interface is perfect and nice. My question become unnecessary thank for everybody for attention.&lt;/p&gt;&#xA;" OwnerUserId="6609" LastActivityDate="2016-09-28T10:31:18.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8297" PostTypeId="2" ParentId="8289" CreationDate="2016-09-28T10:34:21.963" Score="1" Body="&lt;p&gt;elementary OS doesn't have an option like Ubuntu of loading directly from PPD. I would recommend instead downloading the driver directly from the manufacturer's website with their install script and following elementary's prompts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you would like to configure additional administrative features, run &lt;code&gt;system-config-printer&lt;/code&gt; in your Terminal. Alternatively, you could try a &lt;a href=&quot;https://www.linux.com/blog/add-printer-linux-cups-web-utility&quot; rel=&quot;nofollow&quot;&gt;CUPS web install&lt;/a&gt; or, if you are a glutton for punishment, &lt;a href=&quot;http://blog.ostermiller.org/ubuntu-printer-install-command-line/&quot; rel=&quot;nofollow&quot;&gt;CUPS install by text&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T10:34:21.963" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8298" PostTypeId="2" ParentId="7913" CreationDate="2016-09-28T11:38:07.120" Score="2" Body="&lt;p&gt;Here's a quicker route for making the affiliation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sed -i '$a xdg-mime default org.pantheon.appcenter.desktop x-scheme-handler/apt' ~/.local/share/applications/mimeapps.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;sup&gt; This appends &lt;code&gt;x-scheme-handler/apt=org.pantheon.appcenter.desktop&lt;/code&gt; to your list of custom mime types&lt;/sup&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My install of &lt;code&gt;apturl&lt;/code&gt; had all sorts of issues and in the end, it never even ran &lt;code&gt;apt://&lt;/code&gt; successfully. AppCenter should be natively processing inbound links anyway, as they previously went to Ubuntu's software center. I &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1628476&quot; rel=&quot;nofollow&quot;&gt;filed a bug report here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T11:38:07.120" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8299" PostTypeId="2" ParentId="8192" CreationDate="2016-09-28T13:14:26.117" Score="-1" Body="&lt;p&gt;Need to report the AppCenter bug. Ubuntu Software updater currently fetch Ubuntu base, kernel and other software updates but I did not find any elementary base updates. I don't know whether Software updater fetches elementary base updates too.&lt;/p&gt;&#xA;" OwnerUserId="6655" LastActivityDate="2016-09-28T13:14:26.117" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8300" PostTypeId="1" CreationDate="2016-09-28T14:12:47.383" Score="0" ViewCount="167" Body="&lt;p&gt;In Freya I used Footnote all the time and I thought it would come installed by default in Loki but instead I can't even figure out how to install it.&lt;/p&gt;&#xA;" OwnerUserId="4536" LastActivityDate="2016-09-29T16:41:18.077" Title="Where's Footnote in Loki?" Tags="|release-loki|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8302" PostTypeId="2" ParentId="8300" CreationDate="2016-09-28T15:03:06.490" Score="2" Body="&lt;p&gt;It appears that there hasn't yet been a stable release of this app. You could &lt;a href=&quot;https://quassy.github.io/elementary-apps/Footnote/&quot; rel=&quot;nofollow&quot;&gt;install Footnote from elementary-daily&lt;/a&gt;. Fair warning, though: adding elementary-daily may cause your OS to be unstable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an alternative, you could use Notes or GNotes (both available in AppCenter), or take notes in Scratch.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;: It looks like there isn't a Loki-compatible version of Footnote in elementary-daily. In &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily&quot; rel=&quot;nofollow&quot;&gt;this list of apps&lt;/a&gt;, neither of the Footnote packages ends with &lt;code&gt;ubuntu16.10.1&lt;/code&gt; or &lt;code&gt;ubuntu0.4.1&lt;/code&gt;. You may be able to &lt;a href=&quot;https://launchpad.net/footnote&quot; rel=&quot;nofollow&quot;&gt;check out the source code&lt;/a&gt; and build Footnote from source, but the app may behave unexpectedly on Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last non-translation update to Footnote was in October 2015, so it probably needs some love in order to work well on Loki. If you're interested, this would be a good opportunity to get involved with elementary! :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2016-09-29T16:41:18.077" LastActivityDate="2016-09-29T16:41:18.077" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8303" PostTypeId="2" ParentId="8192" CreationDate="2016-09-28T15:14:07.060" Score="2" Body="&lt;p&gt;This is &lt;em&gt;similar&lt;/em&gt; (not identical) to a bug in Loki reported recently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please mark yourself as affected here (in case you are not the one who opened the bug) if you feel this bug represents your issue: &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1628324&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/appcenter/+bug/1628324&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-09-28T15:14:07.060" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8304" PostTypeId="1" CreationDate="2016-09-28T15:17:57.890" Score="0" ViewCount="127" Body="&lt;p&gt;Features 'reveal pointer' does not work, whereas previously functioning properly. #loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Je5B7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Je5B7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3055" LastActivityDate="2017-01-26T19:55:05.627" Title="Features 'reveal pointer' does not work, whereas previously functioning properly" Tags="|mouse|touchpad|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-26T20:19:26.613" ContentLicense="CC BY-SA 3.0" />
  <row Id="8305" PostTypeId="2" ParentId="8225" CreationDate="2016-09-28T15:48:13.767" Score="0" Body="&lt;p&gt;Thank you very much! The Canon Tool is pretty good, totally usable instead of simple scan... On more hint for you and whom it may concern. You can easily create a starter for the Canon application in a few steps:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Scratch&lt;/li&gt;&#xA;&lt;li&gt;Type or copy paste the following:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;[Desktop Entry]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type=Application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Name=ScanGear&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GenericName=Canon ScanGear MP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GenericName[de]=Canon ScanGear MP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Comment[de]=Canon Scanner Tool&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exec=scangearmp&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Icon=&lt;em&gt;Path to image file&lt;/em&gt; (Download one u like for that app)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Categories=Office &lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Save file as ScanGear.desktop or any other name u prefer.&lt;/li&gt;&#xA;&lt;li&gt;Copy or move file to: /usr/share/applications/&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thank you and have fun!&lt;/p&gt;&#xA;" OwnerUserId="4071" LastActivityDate="2016-09-28T15:48:13.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8306" PostTypeId="1" AcceptedAnswerId="8331" CreationDate="2016-09-28T16:31:06.797" Score="10" ViewCount="1774" Body="&lt;p&gt;I created an eOS live USB and set up a dual-boot partition so I can boot into Windows 10 or eOS. The problem is that the clock on Windows is one hour behind the real time whenever I boot into Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I go to Control Panel and check and uncheck auto update then the time corrects itself, until I next go over to eOS. When I return to Windows the time is wrong again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I boot into Windows and then reboot back into Windows, the time stays the same. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the time is right in Windows and I reboot into eOS then the time on the eOS log-in screen is one hour later than the real time. Once I log-in to eOS the time corrects itself automatically. If I then reboot into Windows, the Windows time is one hour behind the true time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that eOS time is one hour ahead of Windows time. If Windows time is set to correct time the eOS time is +1 until it fixes itself. Once eOS time is fixed, Windows time becomes -1 until I correct it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both Windows and eOS options are set to the London time zone. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does eOS support British Summer Time and GMT?&lt;/p&gt;&#xA;" OwnerUserId="6657" LastEditorUserId="6657" LastEditDate="2016-09-28T19:16:27.643" LastActivityDate="2020-04-12T16:57:52.923" Title="Time wrong since dual-boot installation" Tags="|microsoft-windows|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8309" PostTypeId="1" CreationDate="2016-09-28T17:13:44.433" Score="0" ViewCount="85" Body="&lt;p&gt;I am trying to install elementary 0.4 I already have 0.3.2. I went to the elementary web site, I contributed and asked for download but when I check if it has been downloaded its not there. What am I doing wrong, or is this a problem on their end. Answer for an estreme Newbie&lt;/p&gt;&#xA;" OwnerUserId="6658" LastEditorUserId="596" LastEditDate="2016-10-01T23:44:57.840" LastActivityDate="2016-10-01T23:44:57.840" Title="Installation elementary OS 0.4" Tags="|software-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8310" PostTypeId="2" ParentId="8309" CreationDate="2016-09-28T17:19:51.383" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://elementary.io&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the blue &quot;Purchase/Download elementary OS&quot; button &lt;a href=&quot;https://i.stack.imgur.com/C2Smf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C2Smf.png&quot; alt=&quot;elementary.io&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click &quot;Download Loki&quot; (not the magnet icon, which starts a magnetized torrent download) &lt;a href=&quot;https://i.stack.imgur.com/6PHxZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6PHxZ.png&quot; alt=&quot;Download Loki&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The disk image should download to your normal downloads folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From there you can follow the install directions at &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2016-09-28T23:33:01.360" LastActivityDate="2016-09-28T23:33:01.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8311" PostTypeId="2" ParentId="8304" CreationDate="2016-09-28T17:27:00.373" Score="1" Body="&lt;p&gt;This is a bug tracked at &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-mouse-touchpad/+bug/1627121&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/switchboard-plug-mouse-touchpad/+bug/1627121&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In green near the top of the page is &quot;Does this bug affect you?&quot; Click that and register yourself for notifications from the developers.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T17:27:00.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8313" PostTypeId="1" CreationDate="2016-09-28T18:35:14.203" Score="0" ViewCount="661" Body="&lt;p&gt;First of all, sorry about the English, it's not my first language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to install Elementary OS on an SSD, this one : &lt;a href=&quot;https://www.amazon.fr/Kingston-SSDNow-UV400-Disque-SATA/dp/B01FJ4UN76/ref=sr_1_1?ie=UTF8&amp;amp;qid=1475087100&amp;amp;sr=8-1&amp;amp;keywords=kingston+ssd+120&quot; rel=&quot;nofollow&quot;&gt;https://www.amazon.fr/Kingston-SSDNow-UV400-Disque-SATA/dp/B01FJ4UN76/ref=sr_1_1?ie=UTF8&amp;amp;qid=1475087100&amp;amp;sr=8-1&amp;amp;keywords=kingston+ssd+120&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, like I said in the title, I'd like to be able to save my work on the SSD, plug it into other computers and take it everywhere I need !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already created a persistence installation of Debian on a HDD, but I guess the procedure should be slightly different with ElementaryOS and a SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running W10 at the time btw. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already searched for threads or tutorials on how to make a persistent installation of ElementaryOS but never found something useful ... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for the help !&lt;/p&gt;&#xA;" OwnerUserId="6662" LastActivityDate="2017-02-26T21:27:31.243" Title="Installation and persistence on an SSD" Tags="|system-installation|hardware|ssd|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8315" PostTypeId="1" AcceptedAnswerId="8357" CreationDate="2016-09-28T19:24:21.667" Score="1" ViewCount="167" Body="&lt;p&gt;Every time I open a new terminal window it opens on top of the last one I opened. I would like it to be opened in the middle of my screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried editing &lt;em&gt;org.pantheon.terminal.saved-state opening-x&lt;/em&gt; and &lt;em&gt;opening-y&lt;/em&gt; but it only works for the first one I open. Once I position the terminal, the next one opens in that same position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6124" LastActivityDate="2016-09-30T04:25:34.330" Title="How to disable saved state for pantheon-terminal?" Tags="|release-loki|pantheon-terminal|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8316" PostTypeId="1" AcceptedAnswerId="8317" CreationDate="2016-09-28T19:29:59.247" Score="4" ViewCount="353" Body="&lt;p&gt;I've a really old but beloved keyboard that lacks any super/windows/apple/whatever key.  Is there any way I can lock my desktop without picking &quot;suspend&quot; from the upper right menu with my mouse?  (Super-L does work when I plug in a newer keyboard as a test.)  I've tried various combinations of Shift-Ctrl-Alt without luck.&lt;/p&gt;&#xA;" OwnerUserId="6663" LastActivityDate="2016-09-28T20:02:41.417" Title="lock desktop without a super key" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8317" PostTypeId="2" ParentId="8316" CreationDate="2016-09-28T20:02:41.417" Score="5" Body="&lt;p&gt;You can change the default shortcut editing the dconf. For example, to set it to Ctrl+Alt+L you can type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys screensaver &quot;&amp;lt;Ctrl&amp;gt;&amp;lt;Alt&amp;gt;l&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6124" LastActivityDate="2016-09-28T20:02:41.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8319" PostTypeId="2" ParentId="4269" CreationDate="2016-09-28T21:59:57.537" Score="2" Body="&lt;p&gt;There is no way to change the spell checker language on Geary 0.10 (or 0.11). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But that should be available in Geary 0.12 when released.&#xA;&lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=720335&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/show_bug.cgi?id=720335&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6665" LastEditorUserId="6665" LastEditDate="2019-04-25T19:18:03.863" LastActivityDate="2019-04-25T19:18:03.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8320" PostTypeId="1" AcceptedAnswerId="8321" CreationDate="2016-09-28T22:15:02.837" Score="2" ViewCount="1476" Body="&lt;p&gt;I installed some few themes, then wanted to restore the default theme. But when I restored from the tweak tool, I found that it gets broken or something and the status bar gets ugly transparent (photo below).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me restore it as it was &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V4zYF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V4zYF.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6504" LastEditorUserId="5565" LastEditDate="2016-09-28T23:32:15.980" LastActivityDate="2016-09-28T23:32:15.980" Title="Restore original elementary OS theme" Tags="|themes|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8321" PostTypeId="2" ParentId="8320" CreationDate="2016-09-28T22:45:57.893" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/42p3b8/how_do_i_restore_elementarys_default_icons_themes/&quot; rel=&quot;nofollow&quot;&gt;Go back&lt;/a&gt; to your install disk and copy over &lt;code&gt;/usr/share/themes&lt;/code&gt; and &lt;code&gt;/usr/share/icons&lt;/code&gt;, overwriting what you've changed (take a backup if you want)&lt;/li&gt;&#xA;&lt;li&gt;Reinstall with &lt;code&gt;sudo apt-get --reinstall install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T22:45:57.893" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8322" PostTypeId="2" ParentId="7243" CreationDate="2016-09-28T23:01:03.037" Score="1" Body="&lt;p&gt;This is a bug. You can track it &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1628711&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt; by adding yourself where it says &quot;Does this bug affect you?&quot; and &quot;subscribed to this bug's notifications&quot;. I recommend subscribing so that developers prioritize the issue and can ask for your logs, if needed.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-28T23:01:03.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8325" PostTypeId="1" AcceptedAnswerId="8332" CreationDate="2016-09-29T01:15:11.683" Score="1" ViewCount="79" Body="&lt;p&gt;I went through the Getting Started documentation this evening and successfully installed my hello-again App into my Applications menu. Now I'm trying to figure out how to uninstall it and having no luck. Typing &quot;hello-again&quot; into the Terminal opens it fine, but &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get purge hello-again &lt;/p&gt;&#xA;&#xA;&lt;p&gt;gives me an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;E: Unable to locate package hello-again&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be great!&lt;/p&gt;&#xA;" OwnerUserId="6667" LastEditorUserId="578" LastEditDate="2016-10-01T01:13:11.453" LastActivityDate="2016-10-01T01:13:11.453" Title="Uninstalling hello-again App from elementary OS developer tutorial" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8327" PostTypeId="2" ParentId="8208" CreationDate="2016-09-29T02:11:59.227" Score="0" Body="&lt;p&gt;Thanks for everyone's help. I believe that through a combination of every solution given here, and &lt;a href=&quot;https://askubuntu.com/questions/85214/how-can-i-prevent-iwconfig-power-management-from-being-turned-on&quot;&gt;this&lt;/a&gt; solutions first answer (the first half of the first answer) I have solved the wifi issue it seems. Although the connection is a bit slow, it seems ok for the moment. Hopefully sometime soon this hardware will get some more support out of the box to make elem OS more accessible. &lt;/p&gt;&#xA;" OwnerUserId="6608" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-09-29T02:11:59.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8328" PostTypeId="2" ParentId="1142" CreationDate="2016-09-29T04:27:19.017" Score="-1" Body="&lt;p&gt;You can use command: &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6668" LastEditorUserId="26" LastEditDate="2016-09-30T18:26:17.023" LastActivityDate="2016-09-30T18:26:17.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8329" PostTypeId="1" AcceptedAnswerId="8330" CreationDate="2016-09-29T05:37:24.123" Score="3" ViewCount="25888" Body="&lt;p&gt;I get a lot of conflicting advice online about how to install video card drivers. What are the differences between the main ways of installing the drivers, and what is the simplest way to get this done?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2017-06-12T15:11:44.967" Title="How to install video card drivers (e.g., nvidia)" Tags="|graphic-drivers|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8330" PostTypeId="2" ParentId="8329" CreationDate="2016-09-29T05:37:24.123" Score="4" Body="&lt;h1&gt;Easiest&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it!&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Manual method&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The above command installs the latest drivers, but you may want to use a prior release, depending on how well your graphics card is supported. There are a few manual methods. I'll walk through some of the more prominent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In menus, you can click on &quot;Applications&quot; in the upper-left corner of your screen and type to search for &quot;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/4392/5565&quot;&gt;Software &amp;amp; Updates&lt;/a&gt;&quot;. You can install proprietary drivers in its &quot;Additional drivers&quot; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1nYeH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1nYeH.png&quot; alt=&quot;SOftware &amp;amp; updates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more control/specificity, install via the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, you'll want to know the name of your graphics card: &lt;code&gt;lspci -k | grep &quot;VGA&quot;&lt;/code&gt;&lt;br&gt;You could also run &lt;code&gt;sudo ubuntu-drivers devices&lt;/code&gt; to see all connected graphics devices. (The latter will show the recommended version.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The manufacturer might recommend specific drivers or a specific version of the driver. Look it up &lt;a href=&quot;http://www.nvidia.com/Download/index.aspx?lang=en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;on their website&lt;/a&gt;. Note the difference between the driver they recommend (the long-lived branch) and their latest release. You can either walk through the steps of their linked installer or, more simply, use &lt;a href=&quot;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;the PPA&lt;/a&gt; (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7507/how-can-i-add-a-ppa-in-loki&quot;&gt;how to install PPAs in Loki&lt;/a&gt;) if you want to install a specific driver version (e.g., nvidia-###):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt install nvidia-###&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(If you Tab twice after typing &quot;nvidia-&quot; in the above command, Terminal will list all possible packages with that prefix.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other tutorials might mention graphical means for installing drivers, but the more you futz with commands (e.g., following the nvidia website's directions), the more opportunity you have to screw up the install. This said, if the simple driver install causes issues, you'll fall back on the manufacturer's install (&lt;code&gt;sudo apt-get purge&lt;/code&gt; the packages you installed and godspeed).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update: Elementary OS 0.4 Loki&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki does not come with &quot;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/4392/5565&quot;&gt;Software &amp;amp; Updates&lt;/a&gt;&quot; installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it by running the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install software-properties-gtk software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5348" LastEditDate="2017-06-12T15:11:44.967" LastActivityDate="2017-06-12T15:11:44.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8331" PostTypeId="2" ParentId="8306" CreationDate="2016-09-29T08:39:26.650" Score="7" Body="&lt;p&gt;Windows sets the BIOS clock to the local time while Linuxes (so elementary OS as well) sets to UTC by default. You can set the hardware clock time standard through the command line. To change this default setting and to set the BIOS clock to local time instead of UTC, you will have to use the &lt;a href=&quot;https://www.freedesktop.org/software/systemd/man/timedatectl.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;timedatectl&lt;/a&gt; command. You can check what you have set to use by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;timedatectl | grep local&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The hardware clock can be queried and set with the timedatectl command. To change the hardware clock time standard to localtime, use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;timedatectl set-local-rtc 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to revert to the hardware clock being in UTC, do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;timedatectl set-local-rtc 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(source: &lt;a href=&quot;https://askubuntu.com/questions/169376/clock-time-is-off-on-dual-boot&quot;&gt;https://askubuntu.com/questions/169376/clock-time-is-off-on-dual-boot&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="17743" LastEditDate="2020-04-12T16:57:52.923" LastActivityDate="2020-04-12T16:57:52.923" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="8332" PostTypeId="2" ParentId="8325" CreationDate="2016-09-29T08:45:51.277" Score="3" Body="&lt;p&gt;Did you build and install a package as well?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, I guess you just did &lt;code&gt;make install&lt;/code&gt;. In this case you will have to remove the files installed manually&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/bin/hello-again&#xA;sudo rm /usr/share/applications/hello.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-29T08:45:51.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8334" PostTypeId="1" CreationDate="2016-09-29T13:03:59.967" Score="3" ViewCount="838" Body="&lt;p&gt;I have a laptop with built in dp port. I use dp to hdmi converter which is working fine on windows, but it is not working on elementary os loki.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/idWlJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/idWlJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6674" LastActivityDate="2017-12-19T11:09:15.870" Title="dp/hdmi not working" Tags="|hdmi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8335" PostTypeId="2" ParentId="8233" CreationDate="2016-09-29T13:15:11.700" Score="0" Body="&lt;p&gt;Can't believe it's been this long and none of the _______'s at elementary HQ haven't fixed this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try this:&#xA;&lt;a href=&quot;http://www.calgorithms.com/blog/2014/07/30/fixing-multiple-monitor-position-in-ubuntu-gnome-14-dot-04/&quot; rel=&quot;nofollow&quot;&gt;http://www.calgorithms.com/blog/2014/07/30/fixing-multiple-monitor-position-in-ubuntu-gnome-14-dot-04/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6675" LastActivityDate="2016-09-29T13:15:11.700" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8339" PostTypeId="2" ParentId="8124" CreationDate="2016-09-29T14:42:39.633" Score="0" Body="&lt;p&gt;Try this which I found on the net:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.pendrivelinux.com/mouse-pointer-disappears-after-switching-users/&quot; rel=&quot;nofollow&quot;&gt;http://www.pendrivelinux.com/mouse-pointer-disappears-after-switching-users/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6678" LastActivityDate="2016-09-29T14:42:39.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8340" PostTypeId="2" ParentId="6685" CreationDate="2016-09-29T16:45:54.703" Score="0" Body="&lt;p&gt;Can't believe it's been this long and none of the _______'s at elementary HQ haven't fixed this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try this: &lt;a href=&quot;http://www.calgorithms.com/blog/2014/07/30/fixing-multiple-monitor-position-in-ubuntu-gnome-14-dot-04/&quot; rel=&quot;nofollow&quot;&gt;http://www.calgorithms.com/blog/2014/07/30/fixing-multiple-monitor-position-in-ubuntu-gnome-14-dot-04/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6675" LastActivityDate="2016-09-29T16:45:54.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8341" PostTypeId="2" ParentId="7717" CreationDate="2016-09-29T17:49:23.270" Score="0" Body="&lt;p&gt;I regularly notice a heavy fan activity when software is updated from within the appcenter after the system has booted, combined with a retarded system response to mouse klicks and keystrokes in other programs like browser etc.&#xA;From the shell, when I run the &quot;top&quot; command, I can see wingpanel consume a lot of CPU. It seems that wingpanel is caused to loop somehow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the updates are done, I note wingpanel's PID, terminate &quot;top&quot; with CTRL-C, and &quot;kill &quot; wingpanel. The system then gets back to normal (quiet fan and a hardly visible wingpanel in &quot;top&quot;).&lt;/p&gt;&#xA;" OwnerUserId="6681" LastActivityDate="2016-09-29T17:49:23.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8342" PostTypeId="2" ParentId="8313" CreationDate="2016-09-29T19:28:26.730" Score="1" Body="&lt;p&gt;Just install it on the ssd normally. The external ssd is not like a USB stick. Just install it and test it.&lt;/p&gt;&#xA;" OwnerUserId="6684" LastActivityDate="2016-09-29T19:28:26.730" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="8343" PostTypeId="1" CreationDate="2016-09-29T19:48:29.403" Score="1" ViewCount="457" Body="&lt;p&gt;When I open the &lt;a href=&quot;https://support.mozilla.org/en-US/kb/firefox-reader-view-clutter-free-web-pages&quot; rel=&quot;nofollow&quot;&gt;Reader View&lt;/a&gt; in Firefox, it adds some disturbing static, whenever sound is played (e.g. youtube, music player, system sounds from the wingpanel...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Neither exiting the Reader View nor closing Firefox will fix this, but logging out and in again does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even tried capturing it with audacity and &lt;a href=&quot;http://manual.audacityteam.org/man/tutorial_recording_computer_playback_on_linux.html&quot; rel=&quot;nofollow&quot;&gt;this guide&lt;/a&gt;, but surprise, the static will not appear in the recording.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this is an issue of Firefox or elementary OS, but I figured, it might as well be one of elementary, as closing Firefox does not fix it.&lt;/p&gt;&#xA;" OwnerUserId="6292" LastActivityDate="2016-11-24T20:59:09.213" Title="Firefox &quot;Reader View&quot; introduces static to my sound" Tags="|sound|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8345" PostTypeId="5" CreationDate="2016-09-29T20:00:02.607" Score="0" Body="&lt;p&gt;LightDM is the operating system's display manager. It controls user sessions, X servers, and &lt;a href=&quot;/questions/tagged/greeter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;greeter&amp;#39;&quot; rel=&quot;tag&quot;&gt;greeter&lt;/a&gt; (the lock screen).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-01T23:44:44.303" LastActivityDate="2016-10-01T23:44:44.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8346" PostTypeId="4" CreationDate="2016-09-29T20:00:02.607" Score="0" Body="LightDM is the operating system's display manager. It controls user sessions, X servers, and [tag:greeter] (the lock screen)." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T14:31:41.897" LastActivityDate="2016-10-02T14:31:41.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8347" PostTypeId="1" AcceptedAnswerId="8367" CreationDate="2016-09-29T20:40:21.713" Score="1" ViewCount="958" Body="&lt;p&gt;I'm not sure, if I am just stupid, or discovered a bug. I wanted to send a file to my phone, using bluetooth.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the pairing, and then wanted to send a file: &lt;a href=&quot;https://i.stack.imgur.com/WRTPI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WRTPI.png&quot; alt=&quot;Bluetooth settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then comes the file selection dialog, where I selected the file:&lt;a href=&quot;https://i.stack.imgur.com/zwAv0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zwAv0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But from there, I did not know, what to do. There is no &lt;strong&gt;send file&lt;/strong&gt; button, hitting &lt;code&gt;enter&lt;/code&gt; does nothing, and the window does not even have a close button. To close it, I had to use the dock. But it did not send the file :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I missing something, or is this a bug?&lt;/p&gt;&#xA;" OwnerUserId="6292" LastActivityDate="2016-12-05T22:54:39.690" Title="Sending files via bluetooth" Tags="|release-loki|bluetooth|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8348" PostTypeId="2" ParentId="6786" CreationDate="2016-09-29T20:59:09.023" Score="0" Body="&lt;p&gt;The updater will only update packages that you have installed, such as applications or your base operating system. Updates will fix bugs and add new features, but it won't ever install different software unless you specifically request.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freya might have been confusing because it used Ubuntu's Software Center, but that has been replaced separately in elementary OS Loki (the Freya update) and in Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-29T20:59:09.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8349" PostTypeId="1" CreationDate="2016-09-29T22:16:55.010" Score="2" ViewCount="1340" Body="&lt;p&gt;If i update the &lt;strong&gt;GTK+&lt;/strong&gt; to &lt;strong&gt;3.20&lt;/strong&gt; or &lt;strong&gt;3.22&lt;/strong&gt; will be able to happen a problem with the system as it uses the &lt;strong&gt;3.18&lt;/strong&gt;?&lt;/p&gt;&#xA;" OwnerUserId="6525" LastActivityDate="2016-09-30T15:22:07.913" Title="Update Gtk+ on Loki?" Tags="|release-loki|gtk|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8350" PostTypeId="2" ParentId="8258" CreationDate="2016-09-29T22:19:49.817" Score="0" Body="&lt;p&gt;Try running Xubuntu or Lubuntu 16.04, they work better in older hardware. You can always customize it so it looks like Elementary. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-29T22:19:49.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8351" PostTypeId="2" ParentId="8349" CreationDate="2016-09-29T22:29:48.027" Score="4" Body="&lt;p&gt;You will get problems for sure. It is strongly adviced to use the GTK version the system is build for.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-09-29T22:29:48.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8352" PostTypeId="1" CreationDate="2016-09-29T22:45:36.570" Score="0" ViewCount="819" Body="&lt;p&gt;In trying to find a suitable OS to install on my 2009 Macbook, I went with Ubuntu with which I couldn't connect to Wi-Fi, so I'd like to try Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a bootable USB with Loki, booted on the OS without installing it and can't click on anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can move the cursor around on the screen but I can't click on any icons or the applications menu..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind of scared to install it. Has anyone had this problem? Did it persist upon actually installing it? &lt;/p&gt;&#xA;" OwnerUserId="6686" LastActivityDate="2016-10-05T13:01:13.160" Title="Loki: Can move cursor on the screen but can't click on anything" Tags="|release-loki|boot|usb|click|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-09T00:14:31.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="8353" PostTypeId="1" CreationDate="2016-09-29T23:58:59.217" Score="3" ViewCount="681" Body="&lt;p&gt;I installed the &quot;Contacts&quot; app in the AppCenter and it does not appear in the Applications list (&lt;a href=&quot;/questions/tagged/slingshot&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;slingshot&amp;#39;&quot; rel=&quot;tag&quot;&gt;slingshot&lt;/a&gt;).  How do I run it?&lt;/p&gt;&#xA;" OwnerUserId="6687" LastEditorUserId="5565" LastEditDate="2016-10-02T14:34:50.957" LastActivityDate="2016-12-01T15:28:48.227" Title="Contacts app not showing in Applications" Tags="|slingshot|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8354" PostTypeId="2" ParentId="8353" CreationDate="2016-09-30T02:38:33.313" Score="1" Body="&lt;p&gt;There are two contacts apps currently in AppCenter, but if you mean the one with the brown icon, just run:&lt;/p&gt;&#xA;&lt;h3&gt;&lt;code&gt;gnome-contacts&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;p&gt;(Full path is &lt;code&gt;/usr/bin/gnome-contacts&lt;/code&gt;.) The easiest way to add a Applications menu (called Slingshot) item is likely &lt;a href=&quot;https://smdavis.us/projects/menulibre/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MenuLibre&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-09-30T02:38:33.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8355" PostTypeId="2" ParentId="38" CreationDate="2016-09-30T02:55:53.853" Score="9" Body="&lt;p&gt;If you prefer a (reversable) GUI option. You can install &quot;elementary tweaks&quot; to be able to toggle settings like this through the &quot;System Settings&quot; App.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install in Freya (0.3):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or to install in Loki (0.4) or Juno (0.5):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In System Settings you will see a new icon &quot;Tweaks&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E7nsx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E7nsx.png&quot; alt=&quot;Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you click this you'll be able to navigate to toggle between single and double click as shown below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/I5wEp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I5wEp.png&quot; alt=&quot;Tweaks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;update&lt;/em&gt;: I have not tested this install on the newest version of elementary OS Juno (0.5) but this appears to be supported by the same PPA as Loki according to the &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-tweaks&lt;/a&gt; repository on GitHub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Disclaimer&lt;/strong&gt;: Note that the &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/38z164/what_is_the_elementary_teams_stance_on_elementary/?st=itp6c68p&amp;amp;sh=1a1d519a&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS developers&lt;/a&gt; do not approve of the use of tweaks. Some of them may break your system and at least led it to look very different to how elementary OS is intended. However, in my experience, using to configure double click and minimise (among the most commonly used features of &lt;code&gt;tweaks&lt;/code&gt;) has been relatively stable in Freya and now Loki.&lt;/p&gt;&#xA;" OwnerUserId="5205" LastEditorUserId="5205" LastEditDate="2019-04-16T05:40:10.980" LastActivityDate="2019-04-16T05:40:10.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8356" PostTypeId="2" ParentId="8174" CreationDate="2016-09-30T03:35:45.290" Score="3" Body="&lt;p&gt;Alternatively you could run: &lt;code&gt;gconftool-2 --set /apps/metacity/general/button_layout --type string &quot;close:maximize&quot;&lt;/code&gt; to maintain consistency with the default elementary window controls.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="160" LastEditDate="2017-01-23T21:22:32.450" LastActivityDate="2017-01-23T21:22:32.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8357" PostTypeId="2" ParentId="8315" CreationDate="2016-09-30T04:14:05.987" Score="2" Body="&lt;p&gt;pantheon-terminal is set to periodically update a saved state variable with your terminal's position. You can flush it out with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.saved-state opening-x&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.saved-state opening-y&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but unless you run these right before you open a new window, any additional windows are coded to overlay the original. (One would think that they should at least cascade... I think that's worthy of a bug report.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your only other option would be to download and recompile pantheon-terminal while commenting out the lines that recall the positional saved state. This would mean commenting out the following two lines in &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-terminal/trunk/view/head:/src/PantheonTerminalWindow.vala&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;/src/PantheonTerminalWindow.vala&lt;/code&gt;&lt;/a&gt; and recompiling as you wish:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    if (restore_pos) {&#xA;        int x; # = saved_state.opening_x;&#xA;        int y; # = saved_state.opening_y;&#xA;&#xA;        if (x != -1 &amp;amp;&amp;amp; y != -1) {&#xA;            move (x, y);&#xA;        } else {&#xA;            x = (Gdk.Screen.width ()  - default_width)  / 2;&#xA;            y = (Gdk.Screen.height () - default_height) / 2;&#xA;            move (x, y);&#xA;        }&#xA;    }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A jury-rigged alternative would be to only open Terminal from a custom keyboard shortcut (or link) and to have that shortcut trigger a simple script that resets those two variables and opens another instance of pantheon-terminal. (Let me know if you would like help with that.) The best solution would likely to be filing a bug report so we can see if we can't get this entire function to be toggle-able in &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt;...&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-09-30T04:25:34.330" LastActivityDate="2016-09-30T04:25:34.330" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8358" PostTypeId="2" ParentId="6866" CreationDate="2016-09-30T04:37:51.880" Score="2" Body="&lt;p&gt;No, it won't work. The basic reason is that it's designed to work with the GNOME desktop environment and elementary OS uses Pantheon instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go to install it, it'll ask you to install a slew of GNOME-related dependencies. (It installs as &lt;code&gt;gnome-pomodoro&lt;/code&gt; even though its install is &lt;code&gt;sudo apt-get install gnome-shell-pomodoro&lt;/code&gt;.) The settings will open, but I wasn't able to start the timer. This would be a nice app for someone to port to the elementary AppCenter. (Do note that &lt;a href=&quot;https://quassy.github.io/elementary-apps/Tomato/&quot; rel=&quot;nofollow&quot;&gt;Tomato&lt;/a&gt; already exists as a elementary OS-specific app, though it's not in AppCenter yet.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-30T04:37:51.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8359" PostTypeId="2" ParentId="6929" CreationDate="2016-09-30T04:51:12.853" Score="1" Body="&lt;p&gt;No, there doesn't appear to be a system-wide service to toggle (in &lt;code&gt;/etc/init&lt;/code&gt; or &lt;code&gt;/usr/bin&lt;/code&gt;), though elementary does have two open tickets for creating one: &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-security-privacy/+bug/1446770&quot; rel=&quot;nofollow&quot;&gt;Add location settings&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1606052&quot; rel=&quot;nofollow&quot;&gt;Create a GeoClue2 &quot;Agent&quot;&lt;/a&gt;. There are open bounties &lt;a href=&quot;https://www.bountysource.com/issues/11805701-add-location-settings&quot; rel=&quot;nofollow&quot;&gt;for&lt;/a&gt; &lt;a href=&quot;https://www.bountysource.com/issues/36308400-create-a-geoclue2-agent&quot; rel=&quot;nofollow&quot;&gt;both&lt;/a&gt;, if you would like to contribute.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-30T04:51:12.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8360" PostTypeId="2" ParentId="8244" CreationDate="2016-09-30T04:58:43.210" Score="0" Body="&lt;p&gt;This appears to be a bug filed with Firefox: &lt;strong&gt;&lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1270397&quot; rel=&quot;nofollow&quot;&gt;Bug 1270397 - On Linux any downloaded file cannot open with alternate download location&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would track and encourage its processing there unless we can localize it to an elementary OS-specific issue.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-30T04:58:43.210" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8361" PostTypeId="1" CreationDate="2016-09-30T05:44:22.773" Score="5" ViewCount="391" Body="&lt;p&gt;I am not certain if this is Ubuntu specific or elementary OS specific.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the lock screen, I do not have the capability to change my brightness using the dedicated keys on my keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It turned problematic when I had turned my brightness all the way down, when leaving the desk, and returned to a screen that had turned off (lock computer when away for x minutes), and effectively rendered nothing upon 'wake' because the brightness was set to 0 before I left the desk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could not turn it back on. Luckily, entering the password, hitting Enter and then changing the brightness rescued me -- but that is not an ideal solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently using nvidia drivers installed via &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2017-05-17T22:56:29.433" Title="Cannot change brightness on lock screen" Tags="|release-loki|nvidia|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8362" PostTypeId="1" AcceptedAnswerId="8363" CreationDate="2016-09-30T06:12:54.440" Score="4" ViewCount="12432" Body="&lt;p&gt;I know Pantheon Terminal (just called Terminal) is the default terminal. But if I wanted to use an alternative as the default (e.g., &lt;code&gt;gnome-terminal&lt;/code&gt; when called from other apps or from a keyboard shortcut), how can I set it?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2020-07-03T04:44:30.170" Title="How to set alternative terminal as default" Tags="|pantheon-terminal|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8363" PostTypeId="2" ParentId="8362" CreationDate="2016-09-30T06:12:54.440" Score="5" Body="&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec gnome-terminal&#xA;gsettings set org.gnome.desktop.default-applications.terminal exec-arg ''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you want to set a terminal other than &lt;code&gt;gnome-terminal&lt;/code&gt; as the default, replace that text in the command.&lt;/p&gt;&#xA;&lt;p&gt;If you would like to do this in a GUI, run &lt;code&gt;dconf-editor&lt;/code&gt; and drill down the menus (o&lt;code&gt;rg &amp;gt; gnome &amp;gt; desktop &amp;gt; applications &amp;gt; terminal&lt;/code&gt;). &lt;code&gt;exec&lt;/code&gt; sets the command to execute as the default and the &lt;code&gt;exec-arg&lt;/code&gt; adds any flags to run on the command. (Note that the description says that this method is deprecated, which it has said for some time, but it works with Loki. Otherwise there is &lt;a href=&quot;https://git.gnome.org/browse/glib/tree/gio/gdesktopappinfo.c#n2473&quot; rel=&quot;nofollow noreferrer&quot;&gt;an order&lt;/a&gt; in which GNOME prefers different terminals.)&lt;/p&gt;&#xA;&lt;p&gt;To restore the defaults (&lt;code&gt;pantheon-terminal -e&lt;/code&gt;):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.default-applications.terminal exec&#xA;gsettings reset org.gnome.desktop.default-applications.terminal exec-arg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Edit (Gnome 3.36.2):&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;The path to the same settings on newer versions of Gnome is &lt;code&gt;org.gnome.desktop.applications.terminal&lt;/code&gt; instead, however:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;DEPRECATED: This key is deprecated and ignored. The default terminal is handled in GIO.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2020-07-03T04:44:30.170" LastActivityDate="2020-07-03T04:44:30.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8364" PostTypeId="5" CreationDate="2016-09-30T06:49:59.413" Score="0" Body="&lt;p&gt;Disk management refers to the setup and maintenance of hard disk drives and their partitions.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T14:34:54.540" LastActivityDate="2016-10-02T14:34:54.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8365" PostTypeId="4" CreationDate="2016-09-30T06:49:59.413" Score="0" Body="relating to the setup and maintenance of hard disks and their partitions" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T14:33:33.193" LastActivityDate="2016-10-02T14:33:33.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8367" PostTypeId="2" ParentId="8347" CreationDate="2016-09-30T09:04:56.727" Score="1" Body="&lt;p&gt;I think that it is a bug, you might want to report it &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+filebug&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+filebug&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-30T09:04:56.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8368" PostTypeId="2" ParentId="8212" CreationDate="2016-09-30T09:22:43.730" Score="1" Body="&lt;p&gt;This is issue is known and has already been reported as a bug: &lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1420633&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/maya/+bug/1420633&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-30T09:22:43.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8369" PostTypeId="1" CreationDate="2016-09-30T09:36:19.167" Score="1" ViewCount="376" Body="&lt;p&gt;I installed Loki successfully on a Mac Mini 2011 a couple of days ago. Everything is working fine, but hardware acceleration (which I don't need) and the Display Port output (which I do need).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's what &lt;code&gt;lshw -C video&lt;/code&gt; gives me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-display UNCLAIMED     &#xA;       description: VGA compatible controller&#xA;       product: Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]&#xA;       vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm pciexpress msi vga_controller bus_master cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:90000000-9fffffff memory:a8800000-a881ffff ioport:2000(size=256) memory:a8820000-a883ffff&#xA;  *-display UNCLAIMED&#xA;       description: Display controller&#xA;       product: 2nd Generation Core Processor Family Integrated Graphics Controller&#xA;       vendor: Intel Corporation&#xA;       physical id: 2&#xA;       bus info: pci@0000:00:02.0&#xA;       version: 09&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: msi pm cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:a8000000-a83fffff memory:a0000000-a7ffffff ioport:3000(size=64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;glxgears -info&lt;/code&gt; says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GL_RENDERER   = Gallium 0.4 on llvmpipe (LLVM 3.8, 256 bits)&#xA;GL_VERSION    = 3.0 Mesa 11.2.0&#xA;GL_VENDOR     = VMware, Inc.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The radeon driver is installed, but if I understand correctly, not used. I don't care about the driver I'm using, as long as I can attach a second screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ides on what to do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="6689" LastEditorUserId="68" LastEditDate="2016-10-01T22:18:56.330" LastActivityDate="2024-03-22T11:06:20.720" Title="No Display Port output &amp; hardware acceleration when using Loki on a Mac Mini 2011" Tags="|release-loki|graphics|radeon|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8371" PostTypeId="2" ParentId="7286" CreationDate="2016-09-30T12:24:10.603" Score="2" Body="&lt;p&gt;There is a new version on their site for Loki, GUI is working. However, you still have to install the libcrypto dependency (&lt;code&gt;sudo apt install -f&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-30T12:24:10.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8372" PostTypeId="2" ParentId="5588" CreationDate="2016-09-30T12:55:51.777" Score="1" Body="&lt;p&gt;elementary OS is based on Ubuntu so there are good chances that it will work the same way it does with Ubuntu. However I would suggest that you test it with a Live CD / USB so that there are no bad suprises.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-09-30T12:55:51.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8374" PostTypeId="2" ParentId="4318" CreationDate="2016-09-30T13:46:54.730" Score="6" Body="&lt;p&gt;&lt;code&gt;pantheon-terminal&lt;/code&gt; actually has an undocumented command line option &lt;code&gt;-w&lt;/code&gt; with which you can specify a working directory for the new terminal.&lt;br&gt;&#xA;This option also handily checks for already existing pantheon-terminal windows and opens a new tab if there is one, or a new window if there isn't.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've written a tiny script that simply uses that option and then focuses the terminal with &lt;code&gt;wmctrl&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;pantheon-terminal -w ''&#xA;# A small sleep might be useful if the terminal doesn't open fast enough for wmctrl to focus it&#xA;#sleep 0.05&#xA;wmctrl -ia $(wmctrl -lx | sed -n 's/^\(0x[0-9a-f]\{8\}\)\s\{1,2\}[0-9-]\+ pantheon-terminal\.Pantheon-terminal .*$/\1/p' | tail -n1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The script depends on the &lt;code&gt;wmctrl&lt;/code&gt; package.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will open the new tab in the last opened terminal window. If you'd rather like it opened in the first opened window, check the history of my answer for an older version of the script with that behaviour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saved the script to &lt;code&gt;/opt/open-terminal.sh&lt;/code&gt; and made it executable with&lt;br&gt;&#xA;&lt;code&gt;chmod +x /opt/open-terminal.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've mapped the script to the &amp;lt;Super&amp;gt;+T key combination so that I can easily open a new terminal whenever and wherever:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&amp;nbsp;&lt;a href=&quot;https://i.stack.imgur.com/63Twk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/63Twk.png&quot; alt=&quot;global shortcut set in switchboard&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want that behaviour whenever you click on the Terminal shortcut, you could probably simply change the Exec parameter to the script.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command wil make a copy of the pantheon-terminal shortcut for your user and set it to execute the script:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sed '/^\[Desktop Entry\]$/,/^Exec=pantheon-terminal$/{s#Exec=pantheon-terminal$#Exec=/opt/open-terminal.sh#}' /usr/share/applications/pantheon-terminal.desktop &amp;gt; ~/.local/share/applications/pantheon-terminal.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;b&gt;elementaryOS Loki (v0.4):&lt;/b&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As pointer out by @cipricus in the comments, it seems that with pantheon-terminal v4.0+ (Loki and above), they changed the behaviour of the &lt;code&gt;-w&lt;/code&gt; option to also automatically focus the temrinal window.&lt;br&gt;&#xA;So if you are on Loki, you only have to add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-terminal -w ''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as the command in the custom keyboard shortcuts and the desktop shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the command to create a copy of the desktop shortcut with only the &lt;code&gt;pantehon-terminal -w&lt;/code&gt; command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sed '/^\[Desktop Entry\]$/,/^Exec=pantheon-terminal$/{s#Exec=pantheon-terminal$#Exec=pantheon-terminal -w &quot;&quot;#}' /usr/share/applications/pantheon-terminal.desktop &amp;gt; ~/.local/share/applications/pantheon-terminal.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6692" LastEditorUserId="6692" LastEditDate="2016-10-10T20:26:39.030" LastActivityDate="2016-10-10T20:26:39.030" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8375" PostTypeId="1" CreationDate="2016-09-30T13:59:13.880" Score="1" ViewCount="732" Body="&lt;p&gt;Before anything I would like to apologize for any typo, English isnt my first language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Im using a system who is based on Ubuntu 16.04 (elementary OS Loki), before that I was using Ubuntu 14.04 that had support for AMD fglrx (removed on 16.04) consequently I could use the AMD Catalyst Control where I could increase the saturation of the monitor, thats a configuration that ive be using since I was a Windows user, and I really get used to the look that the increase saturation gives, its being really hard to adapt to the system without the saturation increase. Theres any software, driver or configuration where I can change the saturation ?&lt;/p&gt;&#xA;" OwnerUserId="6693" LastActivityDate="2017-02-27T18:56:49.853" Title="Change saturation on Elemtary OS Loki" Tags="|graphic-drivers|color-format|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8376" PostTypeId="1" AcceptedAnswerId="8574" CreationDate="2016-09-30T14:29:34.510" Score="2" ViewCount="551" Body="&lt;p&gt;I've tried following other guides for Ubuntu on this, but no dice.  I keep getting this error after running&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo ./AdobeAIRInstaller.bin&lt;/p&gt;&#xA;&#xA;&lt;p&gt;error:&#xA;/tmp/air.7AG64G/setup: error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i followed all the other guides to install required libraries, it can't find anything!  I'm running on a live USB on a macbook air 2014&lt;/p&gt;&#xA;" OwnerUserId="6694" LastActivityDate="2016-10-17T11:29:25.640" Title="How to you install Adobe Air on Loki 64bit" Tags="|macbook|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8377" PostTypeId="2" ParentId="8349" CreationDate="2016-09-30T15:22:07.913" Score="3" Body="&lt;p&gt;Don't try to upgrade it, you just will end with a messed up system, all the versions if gtk lost compatibility from one version to another (you can see this in the themes for example, every gtk theme needs to be made for a specific gtk version)&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2016-09-30T15:22:07.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8378" PostTypeId="2" ParentId="7447" CreationDate="2016-09-30T16:06:01.310" Score="8" Body="&lt;p&gt;Its a bug, already reported:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1617687&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/appcenter/+bug/1617687&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Im also affected, hope it will get fixed soon.&lt;/p&gt;&#xA;" OwnerUserId="6631" LastActivityDate="2016-09-30T16:06:01.310" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8379" PostTypeId="1" AcceptedAnswerId="8993" CreationDate="2016-09-30T16:07:01.957" Score="0" ViewCount="200" Body="&lt;p&gt;Wingpanel keeps resetting whenever I click an application in slingshot, lock, logout, Alt+F2, Next Song, Etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However it's doesn't reset if I click &quot;Applications&quot; then type the app I want then press enter, and I can change the system volume without any problems.  But other that that it's being 100% useless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not an advanced Linux User However I do understand the basics, I've been using it on and off for about 5 years.  I'm not computer illiterate I have my CompTIA A+ it's just I'm trying to learn linux for my Linux+ and pentesting certifications(Also for it to become my default OS.  So I'll understand any explanations pretty well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to record it with gtk-recordmydesktop and kazam but however when you start recording they both go to wingpanel to stop so that didn't work out all too well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How would I go about diagnosing and fixing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TIA, Kristi.&lt;/p&gt;&#xA;" OwnerUserId="6696" LastEditorUserId="37" LastEditDate="2016-11-01T09:13:38.473" LastActivityDate="2016-11-01T09:13:38.473" Title="Wingpanel Keeps Resetting on click" Tags="|wingpanel|slingshot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8380" PostTypeId="1" AcceptedAnswerId="8488" CreationDate="2016-09-30T16:19:18.053" Score="2" ViewCount="88" Body="&lt;p&gt;Fresh installation of Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot of the issue. Any way to get rid of it? It only happens on one the two screens (main one).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eCEiO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eCEiO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6697" LastActivityDate="2016-10-04T12:24:00.750" Title="Weird shadow/glow/smear on the right side of all windows" Tags="|release-loki|window-manager|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8381" PostTypeId="2" ParentId="8375" CreationDate="2016-09-30T16:19:52.683" Score="1" Body="&lt;p&gt;It includes both using System Settings &gt; Color and the settings built into your monitor. Go to &lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings &gt; Color: Click your monitor and then click &quot;View Details&quot; it should ask you to install something. Change the profile then click view details and look at the preview tabs. keep doing this until you find the right one for you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After to get an added color boost play with you monitor settings to make it perfect.&lt;/p&gt;&#xA;" OwnerUserId="6696" LastActivityDate="2016-09-30T16:19:52.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8382" PostTypeId="1" AcceptedAnswerId="8419" CreationDate="2016-09-30T17:26:58.717" Score="2" ViewCount="10436" Body="&lt;p&gt;I'm on Elementary OS 0.4 and i've a problem with the wifi connection, i tryied to fix it with all i've found on the web, but it still doesn't work. With  &quot; lshw -C network &quot; i got that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network UNCLAIMED&#xA;   description: Network controller&#xA;   product: BCM43142 802.11b/g/n&#xA;   vendor: Broadcom Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   version: 01&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: bus_master cap_list&#xA;   configuration: latency=0&#xA;   resources: memory:f7800000-f7807fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Could anyone help me? I'm a noob.&lt;/p&gt;&#xA;" OwnerUserId="6698" LastEditorUserId="6698" LastEditDate="2016-10-01T17:56:39.337" LastActivityDate="2020-06-02T03:46:32.760" Title="SOLVED Problem Broadcom 43142 wifi" Tags="|release-loki|wifi|drivers|networking|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8383" PostTypeId="1" AcceptedAnswerId="8386" CreationDate="2016-09-30T18:52:23.797" Score="8" ViewCount="14254" Body="&lt;p&gt;Can I install Elementary OS on my Raspberry Pi 3 model B?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to run it for MySQL and coding, thanks.&lt;/p&gt;&#xA;" OwnerUserId="6702" LastEditorUserId="68" LastEditDate="2016-10-01T22:36:54.450" LastActivityDate="2016-10-01T22:37:11.213" Title="Can elementary OS running on a Raspberry Pi?" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-02T14:31:06.443" ContentLicense="CC BY-SA 3.0" />
  <row Id="8384" PostTypeId="1" AcceptedAnswerId="8484" CreationDate="2016-09-30T19:29:17.740" Score="0" ViewCount="1714" Body="&lt;p&gt;I don't seem to be able to add VPNC connections in the network manager. I've installed vpnc and vpnc-scripts, neither has added the VPNC option to the menu to add a VPN connection. I can run vpnc from terminal (with sudo) to connect to a VPN, but this is non-ideal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone advise how to add a VPNC network connection using the UI?&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2018-11-02T22:02:20.090" Title="VPNC &amp; network-manager" Tags="|networking|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8385" PostTypeId="2" ParentId="8124" CreationDate="2016-09-30T20:05:06.900" Score="0" Body="&lt;p&gt;This appears to be &lt;strong&gt;patched in Loki&lt;/strong&gt;, if you can upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; is the manual fix that worked for someone else:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:oibaf/graphics-drivers&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(No worries, this &lt;a href=&quot;https://askubuntu.com/q/215267/49899&quot;&gt;does not&lt;/a&gt; upgrade the distribution to Loki.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-01T10:43:34.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8386" PostTypeId="2" ParentId="8383" CreationDate="2016-09-30T20:09:17.747" Score="6" Body="&lt;p&gt;&lt;strong&gt;Nope&lt;/strong&gt;, there is no current build of the operating system for ARM processors, though theoretically someone could build one. However, you can download ARM and Raspberry Pi-compatible builds of &lt;a href=&quot;https://wiki.ubuntu.com/ARM/RaspberryPi&quot; rel=&quot;noreferrer&quot;&gt;Ubuntu&lt;/a&gt; and Debian (&lt;a href=&quot;https://www.raspberrypi.org/downloads/raspbian/&quot; rel=&quot;noreferrer&quot;&gt;Raspbian&lt;/a&gt;), the latter being the most popular. (elementary OS is based on Ubuntu, which is based on Debian.) You can track the wishlist request for an ARM version of elementary OS &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629454&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="68" LastEditDate="2016-10-01T22:37:11.213" LastActivityDate="2016-10-01T22:37:11.213" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8387" PostTypeId="2" ParentId="7027" CreationDate="2016-09-30T20:19:19.630" Score="1" Body="&lt;p&gt;Try reinstalling it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;sudo apt remove wingpanel-indicator-datetime&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;sudo apt install wingpanel-indicator-datetime&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That will remove and re-install the date &quot;indicator&quot; of the menu bar (known as &lt;code&gt;wingpanel&lt;/code&gt;). Are you still having this issue in Loki?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-09-30T20:19:19.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8388" PostTypeId="2" ParentId="8382" CreationDate="2016-09-30T20:29:07.303" Score="2" Body="&lt;p&gt;You're missing the Broadcom drivers, open terminal and paste&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;sudo apt install bcmwl-kernel-source&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Reboot your machine and try to connect to the wifi.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-30T20:29:07.303" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8389" PostTypeId="2" ParentId="8376" CreationDate="2016-09-30T20:30:40.050" Score="-1" Body="&lt;p&gt;Try this tutorial, it should work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.noobslab.com/2015/05/adobeair-is-now-available-for-ubuntu.html&quot; rel=&quot;nofollow&quot;&gt;http://www.noobslab.com/2015/05/adobeair-is-now-available-for-ubuntu.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-30T20:30:40.050" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8390" PostTypeId="2" ParentId="8353" CreationDate="2016-09-30T20:37:59.497" Score="4" Body="&lt;p&gt;Open terminal and paste&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;sudo nano /usr/share/applications/org.gnome.Contacts.desktop&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Look for &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;OnlyShowIn=GNOME;Unity&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and add Pantheon after Unity&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;OnlyShowIn=GNOME;Unity;Pantheon;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then click &lt;strong&gt;ctrl+x&lt;/strong&gt; and then &lt;strong&gt;y&lt;/strong&gt; and &lt;strong&gt;Enter&lt;/strong&gt; to save it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now search for contacts in &lt;strong&gt;Slingshot&lt;/strong&gt;. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-09-30T20:37:59.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8391" PostTypeId="1" CreationDate="2016-09-30T22:29:33.360" Score="1" ViewCount="1617" Body="&lt;p&gt;I recently installed Loki on VM to test it out, but to my surprise it is sluggish and choppy. &#xA;I have enabled 3d acceleration and 128mb graphic, 10gb ram and 4 cores of i7 with 100% limit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the reason? How to fix it?&lt;/p&gt;&#xA;" OwnerUserId="5497" LastActivityDate="2016-10-09T19:25:30.713" Title="Sluggish performance on Oracle VM" Tags="|release-loki|virtualbox|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8392" PostTypeId="1" AcceptedAnswerId="8397" CreationDate="2016-10-01T00:28:27.640" Score="1" ViewCount="173" Body="&lt;p&gt;Why doesn't the AppCenter download the latest version of Firefox 49.0.1?  Is there a way to install it?&lt;/p&gt;&#xA;" OwnerUserId="6710" LastActivityDate="2016-10-01T04:46:41.770" Title="Firefox version not the newest" Tags="|release-loki|appcenter|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8396" PostTypeId="2" ParentId="7509" CreationDate="2016-10-01T02:46:04.903" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/etA6G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/etA6G.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right-click the red mark right in that little corner to access plank settings.&lt;/p&gt;&#xA;" OwnerUserId="6711" LastEditorUserId="26" LastEditDate="2016-10-02T13:50:12.677" LastActivityDate="2016-10-02T13:50:12.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8397" PostTypeId="2" ParentId="8392" CreationDate="2016-10-01T04:46:41.770" Score="1" Body="&lt;p&gt;Ubuntu maintains &lt;a href=&quot;http://packages.ubuntu.com/xenial/firefox&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Firefox package&lt;/a&gt; that elementary OS uses (both in &lt;code&gt;apt install&lt;/code&gt; and in the AppCenter). Ubuntu is &lt;a href=&quot;https://askubuntu.com/q/6339/49899&quot;&gt;pretty good&lt;/a&gt; at keeping it up to date. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case &lt;a href=&quot;https://www.mozilla.org/en-US/firefox/49.0.1/releasenotes/&quot; rel=&quot;nofollow noreferrer&quot;&gt;49.0.1&lt;/a&gt; is only an update for Windows, so it shouldn't be of much importance. But you can &lt;a href=&quot;https://www.mozilla.org/en-US/firefox/new/&quot; rel=&quot;nofollow noreferrer&quot;&gt;download the binary&lt;/a&gt; and install it over your old release if you want.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-01T04:46:41.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8398" PostTypeId="2" ParentId="7808" CreationDate="2016-10-01T04:56:59.023" Score="0" Body="&lt;p&gt;A graphical solution:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click &quot;Applications&quot; in the upper-left corner and search for &lt;code&gt;Software &amp;amp; Updates&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Tab over to &quot;Other Software&quot; and add your PPA address there.&lt;/li&gt;&#xA;&lt;li&gt;Update as you would in Linux Mint (&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;). I imagine AppCenter should search for update the same way, but I haven't tried it myself.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SKgjz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SKgjz.png&quot; alt=&quot;Other Software&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-01T04:56:59.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8399" PostTypeId="2" ParentId="2472" CreationDate="2016-10-01T07:58:47.037" Score="1" Body="&lt;p&gt;There is a GUI application called &lt;code&gt;system-config-lvm&lt;/code&gt;, however it does not seem to work under elementary OS Loki.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-01T07:58:47.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8400" PostTypeId="2" ParentId="7199" CreationDate="2016-10-01T08:56:05.760" Score="1" Body="&lt;p&gt;These are the extensions that have been installed system-wide. So you can only disable them in Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can however remove these packages (&lt;code&gt;xul-ext-lightbeam&lt;/code&gt;, &lt;code&gt;xul-ext-kwallet5&lt;/code&gt;, etc.) from your system, but note that this affects all users of the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can get the list of the extensions&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt cache ^xul-ext&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can remove them (for exemple the lightbeam one)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt remove xul-ext-lightbeam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-10-01T11:59:17.463" LastActivityDate="2016-10-01T11:59:17.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8402" PostTypeId="2" ParentId="7107" CreationDate="2016-10-01T10:27:58.307" Score="1" Body="&lt;p&gt;&lt;code&gt;tumbler&lt;/code&gt; is managing which thumbnails are generated in elementary OS .&lt;br&gt;&#xA;In order to customize the tumbler config file, you can make a local copy by creating a &lt;code&gt;tumbler&lt;/code&gt; folder in &lt;code&gt;~/.config&lt;/code&gt; and then copying the original config file &lt;code&gt;tumbler.rc&lt;/code&gt; from &lt;code&gt;/etc/xdg/tumbler&lt;/code&gt; to that folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest way to do it, is to use these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.config/tumbler&#xA;cp /etc/xdg/tumbler/tumbler.rc ~/.config/tumbler/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, edit the file with your text editor&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.config/tumbler/tumbler.rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;search for the section&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# PDF/PS thumbnailer&#xA;[PopplerThumbnailer]&#xA;Disabled=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change &lt;code&gt;Disabled=false&lt;/code&gt; to &lt;code&gt;Disabled=true&lt;/code&gt;. The changes should take effect after a relogin or restart.&lt;/p&gt;&#xA;" OwnerUserId="22" LastEditorUserId="22" LastEditDate="2016-10-01T10:49:44.937" LastActivityDate="2016-10-01T10:49:44.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8403" PostTypeId="2" ParentId="7334" CreationDate="2016-10-01T10:47:24.433" Score="0" Body="&lt;p&gt;This is &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/1568604&quot; rel=&quot;nofollow noreferrer&quot;&gt;reportedly&lt;/a&gt; &lt;strong&gt;patched in Loki&lt;/strong&gt;, if you can upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want a manual fix in Freya, this worked for someone else in the thread:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:oibaf/graphics-drivers&#xA;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(No worries, this &lt;a href=&quot;https://askubuntu.com/q/215267/49899&quot;&gt;does not&lt;/a&gt; upgrade the distribution to Loki.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-01T10:47:24.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8404" PostTypeId="1" CreationDate="2016-10-01T10:55:07.580" Score="1" ViewCount="1095" Body="&lt;p&gt;So i downloaded skype through the official website, then installed gdebi through the terminal, and finally opened the downloaded skype file with gdebi package installer. All went smooth, but skype won't start now. What do i do?&lt;/p&gt;&#xA;" OwnerUserId="6709" LastActivityDate="2016-10-01T17:39:07.710" Title="Skype won't launch on Elementary OS Loki" Tags="|release-loki|skype|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8405" PostTypeId="1" CreationDate="2016-10-01T11:14:15.243" Score="3" ViewCount="3683" Body="&lt;p&gt;is there any way to enable wobbly windows effect on elementary OS 0.4 I tried to install compiz but after i install it i discovered that compiz is not compatible with pantheon &lt;/p&gt;&#xA;" OwnerUserId="6504" LastEditorUserId="308" LastEditDate="2018-08-07T17:17:02.750" LastActivityDate="2018-08-07T17:17:02.750" Title="Can you install Compiz on elementary OS" Tags="|themes|window-management|window-manager|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8406" PostTypeId="2" ParentId="7733" CreationDate="2016-10-01T11:28:19.630" Score="1" Body="&lt;p&gt;Also you can use &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow&quot;&gt;https://github.com/bulletmark/libinput-gestures&lt;/a&gt;&#xA;Works fine on loki install&lt;/p&gt;&#xA;" OwnerUserId="6718" LastActivityDate="2016-10-01T11:28:19.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8407" PostTypeId="1" AcceptedAnswerId="8619" CreationDate="2016-10-01T11:35:31.217" Score="0" ViewCount="407" Body="&lt;p&gt;I have an Acer E5-574G laptop, which came with Windows 10. Recently I installed Elementary OS (Loki). Everything worked but my touchpad became super slow. When I rub my finger over touchpad, it moves the cursor very slow. I have also tried to increase the speed from settings but the issue remains. I have already contact with Acer—they said they don't provide any driver for Linux. What I can do now?&lt;/p&gt;&#xA;" OwnerUserId="6719" LastEditorUserId="5565" LastEditDate="2016-10-09T06:17:33.870" LastActivityDate="2016-10-09T06:17:51.337" Title="Touchpad super slow on Acer E5-574G with Loki" Tags="|release-loki|touchpad|laptop|input|acer|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8408" PostTypeId="1" CreationDate="2016-10-01T11:36:53.407" Score="2" ViewCount="1746" Body="&lt;p&gt;I'm using elementary OS Loki 0.4 with the &lt;a href=&quot;https://www.gnome-look.org/content/show.php/Arc-OSX-themes?content=175536&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arc OSX themes&lt;/a&gt; for GTK+ but the UI in apps is very ugly, can someone help me? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q5TbT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q5TbT.png&quot; alt=&quot;Ugly interface in FileZilla&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6720" LastEditorUserId="68" LastEditDate="2016-10-01T22:48:02.617" LastActivityDate="2017-01-26T13:33:15.803" Title="Applications look ugly when using third-party &quot;Arc OSX themes&quot;" Tags="|themes|gtk|" AnswerCount="3" CommentCount="3" ClosedDate="2017-10-08T17:21:08.747" ContentLicense="CC BY-SA 3.0" />
  <row Id="8409" PostTypeId="1" AcceptedAnswerId="8423" CreationDate="2016-10-01T11:52:09.917" Score="0" ViewCount="128" Body="&lt;p&gt;I have an issue on Loki where in the settings/switchboard menu under &quot;system settings/desktop/wallpaper&quot; where the thumbnail previews are not displayed; i an still change the wallpaper however. Not a major issue but definitely annoying. See a GIF capture of it &lt;a href=&quot;https://i.stack.imgur.com/nj4Qt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&#xA;Cheers, Dylan&lt;/p&gt;&#xA;" OwnerUserId="6721" LastActivityDate="2016-10-01T19:12:51.937" Title="Bug? - Wallpaper thumbnails not shown (settings/switchboard)" Tags="|release-loki|wallpaper|switchboard|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T20:55:37.687" ContentLicense="CC BY-SA 3.0" />
  <row Id="8412" PostTypeId="2" ParentId="8382" CreationDate="2016-10-01T13:14:08.793" Score="1" Body="&lt;p&gt;You might have to execute iwconfig manually (the card is there but it is down):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ifconfig wlp4s0 up&#xA;service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Source: &lt;a href=&quot;https://askubuntu.com/questions/760075/cant-view-wifi-networks-after-upgrading-to-ubuntu-16-04&quot;&gt;https://askubuntu.com/questions/760075/cant-view-wifi-networks-after-upgrading-to-ubuntu-16-04&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-01T13:14:08.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8413" PostTypeId="1" AcceptedAnswerId="8422" CreationDate="2016-10-01T15:12:04.717" Score="5" ViewCount="11537" Body="&lt;p&gt;I have an issue with shaky mouse pointer when I'm using touch pad, but only when I'm using one finger.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't happen when I use:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;two fingers to scroll (cursor doesn't move, but I can scroll up and&#xA;down by moving my fingers).&lt;/li&gt;&#xA;&lt;li&gt;USB mouse.&lt;/li&gt;&#xA;&lt;li&gt;Ubuntu (I installed Ubuntu just to check if there is an issue with some driver/settings or with touch pad itself, but issue doesn't happen on Ubuntu).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I also tried this, but with no luck - &lt;a href=&quot;http://useful-linux-tips.blogspot.com/2013/04/get-rid-of-shaky-touchpad-pointer.html&quot; rel=&quot;noreferrer&quot;&gt;http://useful-linux-tips.blogspot.com/2013/04/get-rid-of-shaky-touchpad-pointer.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6725" LastActivityDate="2017-06-17T22:10:45.723" Title="Shaky mouse pointer when using touchpad" Tags="|mouse|touchpad|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8414" PostTypeId="1" AcceptedAnswerId="9385" CreationDate="2016-10-01T15:36:43.560" Score="0" ViewCount="932" Body="&lt;p&gt;Freshly installed elementary os with nvidia drivers will lock up during the boot, delaying to boot by roughly 30s. Is there anything I can do to stop that? I have blacklisted non-nvidia drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is dmesg log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    2.606370] nvidia: module license 'NVIDIA' taints kernel.&#xA;[    2.606372] Disabling lock debugging due to kernel taint&#xA;[    2.608601] nvidia: module verification failed: signature and/or required key missing - tainting kernel&#xA;[    2.611268] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem&#xA;[    2.611318] nvidia-nvlink: Nvlink Core is being initialized, major device number 246&#xA;[    2.611373] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1&#xA;[    2.611376] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  361.42  Tue Mar 22 18:10:58 PDT 2016&#xA;[    2.638320] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  361.42  Tue Mar 22 17:29:54 PDT 2016&#xA;[    2.658866] nvidia-uvm: Loaded the UVM driver in lite mode, major device number 245&#xA;[    2.663479] random: nonblocking pool is initialized&#xA;[    2.684221] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: discard&#xA;[    2.736411] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])&#xA;[    2.747185] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19&#xA;[    2.747229] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20&#xA;[    2.747280] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21&#xA;[    3.000982] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input22&#xA;[    3.001017] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input23&#xA;[    3.001046] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input24&#xA;[    3.001075] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input25&#xA;[    3.099469] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)&#xA;[    3.140468] audit: type=1400 audit(1475335951.975:2): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/ippusbxd&quot; pid=802 comm=&quot;apparmor_parser&quot;&#xA;[    3.140964] audit: type=1400 audit(1475335951.975:3): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/cups-browsed&quot; pid=800 comm=&quot;apparmor_parser&quot;&#xA;[    3.141477] audit: type=1400 audit(1475335951.975:4): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/sbin/dhclient&quot; pid=797 comm=&quot;apparmor_parser&quot;&#xA;[    3.141480] audit: type=1400 audit(1475335951.975:5): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/NetworkManager/nm-dhcp-client.action&quot; pid=797 comm=&quot;apparmor_parser&quot;&#xA;[    3.141482] audit: type=1400 audit(1475335951.975:6): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/NetworkManager/nm-dhcp-helper&quot; pid=797 comm=&quot;apparmor_parser&quot;&#xA;[    3.141484] audit: type=1400 audit(1475335951.975:7): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/connman/scripts/dhclient-script&quot; pid=797 comm=&quot;apparmor_parser&quot;&#xA;[    3.141638] audit: type=1400 audit(1475335951.975:8): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/tcpdump&quot; pid=805 comm=&quot;apparmor_parser&quot;&#xA;[    3.142066] audit: type=1400 audit(1475335951.975:9): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/lightdm/lightdm-guest-session&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    3.142070] audit: type=1400 audit(1475335951.975:10): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/lightdm/lightdm-guest-session//chromium&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    3.218169] NVRM: Your system is not currently configured to drive a VGA console&#xA;[    3.218173] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver&#xA;[    3.218175] NVRM: requires the use of a text-mode VGA console. Use of other console&#xA;[    3.218176] NVRM: drivers including, but not limited to, vesafb, may result in&#xA;[    3.218177] NVRM: corruption and stability problems, and is not supported.&#xA;[   28.103395] NMI watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [nvidia-smi:682]&#xA;[   28.103426] Modules linked in: binfmt_misc nls_iso8859_1 snd_hda_codec_hdmi nvidia_uvm(POE) nvidia_modeset(POE) nvidia(POE) intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul snd_hda_codec_realtek snd_hda_codec_generic aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_intel snd_hda_codec joydev input_leds snd_hda_core snd_hwdep snd_seq_midi snd_seq_midi_event serio_raw snd_pcm snd_rawmidi snd_seq snd_seq_device snd_timer snd mei_me shpchp mei lpc_ich soundcore 8250_fintek soc_button_array tpm_infineon mac_hid parport_pc ppdev lp parport autofs4 hid_generic usbhid hid i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops psmouse drm ahci libahci r8169 mii video fjes&#xA;[   28.103427] CPU: 5 PID: 682 Comm: nvidia-smi Tainted: P           OE   4.4.0-38-generic #57-Ubuntu&#xA;[   28.103428] Hardware name: Gigabyte Technology Co., Ltd. B85M-D3H/B85M-D3H, BIOS F3 05/02/2013&#xA;[   28.103428] task: ffff88042443a940 ti: ffff8804294dc000 task.ti: ffff8804294dc000&#xA;[   28.103501] RIP: 0010:[&amp;lt;ffffffffc0605c7c&amp;gt;]  [&amp;lt;ffffffffc0605c7c&amp;gt;] os_io_read_dword+0xc/0x10 [nvidia]&#xA;[   28.103502] RSP: 0018:ffff8804294dfbf0  EFLAGS: 00000202&#xA;[   28.103502] RAX: 00000000e0bdf260 RBX: ffff880429612fa8 RCX: 0000000000000001&#xA;[   28.103502] RDX: 000000000000e00c RSI: 00000000000a0000 RDI: 000000000000e00c&#xA;[   28.103502] RBP: ffff8804294dfbf0 R08: 00000000000c4835 R09: 00000000000c4835&#xA;[   28.103503] R10: 0000000000000000 R11: ffffffffc0b30a60 R12: 000000000000c000&#xA;[   28.103503] R13: 0000000000001a7c R14: ffff880429612fac R15: ffff880429612fb0&#xA;[   28.103504] FS:  00007f1fd48bd700(0000) GS:ffff88043e340000(0000) knlGS:0000000000000000&#xA;[   28.103504] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033&#xA;[   28.103504] CR2: 00007ffdbabc7ff8 CR3: 0000000428993000 CR4: 00000000001406e0&#xA;[   28.103505] Stack:&#xA;[   28.103506]  ffff880429612f60 ffffffffc0b3a3aa 000000000000c000 ffffffffc0b31175&#xA;[   28.103507]  ffff880429612fa8 ffffffffc0b30f54 ffff880429710008 0000000000004f02&#xA;[   28.103507]  ffff880429612fac 0000000000000000 ffff880429612fb4 ffffffffc0b1a7ec&#xA;[   28.103508] Call Trace:&#xA;[   28.103569]  [&amp;lt;ffffffffc0b3a3aa&amp;gt;] _nv018125rm+0x84da/0xbd60 [nvidia]&#xA;[   28.103627]  [&amp;lt;ffffffffc0b31175&amp;gt;] ? _nv000859rm+0x85/0xb0 [nvidia]&#xA;[   28.103684]  [&amp;lt;ffffffffc0b30f54&amp;gt;] ? _nv013637rm+0x164/0x220 [nvidia]&#xA;[   28.103741]  [&amp;lt;ffffffffc0b1a7ec&amp;gt;] ? _nv014136rm+0x7c/0x170 [nvidia]&#xA;[   28.103796]  [&amp;lt;ffffffffc0b1eb65&amp;gt;] ? _nv000755rm+0x2d5/0x370 [nvidia]&#xA;[   28.103852]  [&amp;lt;ffffffffc0b1ee23&amp;gt;] ? _nv000679rm+0x223/0x3b0 [nvidia]&#xA;[   28.103906]  [&amp;lt;ffffffffc0b2c94a&amp;gt;] ? _nv000691rm+0x2ba/0x340 [nvidia]&#xA;[   28.103961]  [&amp;lt;ffffffffc0b20a1a&amp;gt;] ? rm_disable_adapter+0x6a/0x130 [nvidia]&#xA;[   28.103962]  [&amp;lt;ffffffff810ca100&amp;gt;] ? up+0x10/0x50&#xA;[   28.103993]  [&amp;lt;ffffffffc0609273&amp;gt;] ? nv_uvm_notify_stop_device+0x63/0x80 [nvidia]&#xA;[   28.104022]  [&amp;lt;ffffffffc05fa73d&amp;gt;] ? nv_close_device+0xed/0x130 [nvidia]&#xA;[   28.104050]  [&amp;lt;ffffffffc05fc940&amp;gt;] ? nvidia_close+0xd0/0x300 [nvidia]&#xA;[   28.104078]  [&amp;lt;ffffffffc05fa39c&amp;gt;] ? nvidia_frontend_close+0x2c/0x50 [nvidia]&#xA;[   28.104080]  [&amp;lt;ffffffff8120f544&amp;gt;] ? __fput+0xe4/0x220&#xA;[   28.104081]  [&amp;lt;ffffffff8120f6be&amp;gt;] ? ____fput+0xe/0x10&#xA;[   28.104083]  [&amp;lt;ffffffff8109ecf1&amp;gt;] ? task_work_run+0x81/0xa0&#xA;[   28.104084]  [&amp;lt;ffffffff81003242&amp;gt;] ? exit_to_usermode_loop+0xc2/0xd0&#xA;[   28.104085]  [&amp;lt;ffffffff81003c6e&amp;gt;] ? syscall_return_slowpath+0x4e/0x60&#xA;[   28.104087]  [&amp;lt;ffffffff81830850&amp;gt;] ? int_ret_from_sys_call+0x25/0x8f&#xA;[   28.104095] Code: 1f 44 00 00 55 89 fa 48 89 e5 ec 5d c3 66 90 0f 1f 44 00 00 55 89 fa 48 89 e5 66 ed 5d c3 90 0f 1f 44 00 00 55 89 fa 48 89 e5 ed &amp;lt;5d&amp;gt; c3 66 90 0f 1f 44 00 00 55 48 85 ff 48 89 e5 75 10 85 d2 48 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6726" LastActivityDate="2020-04-22T07:14:12.177" Title="Soft lockup and delayed boot" Tags="|boot|nvidia|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8415" PostTypeId="1" CreationDate="2016-10-01T16:30:28.730" Score="6" ViewCount="9914" Body="&lt;p&gt;I have an external monitor attached to my laptop via HDMI.  The monitor is mounted above my laptop so they are positioned in a vertical format.  If my laptop is the primary screen, then I can't drag any windows to the above monitor - they stop when they hit the task bar.   And if I make my external monitor the primary, then when I detach my laptop, it doesn't adjust to being the only monitor (all the wing panel and task bar etc... stay on the external monitor) leaving me unable to do anything.&lt;/p&gt;&#xA;" OwnerUserId="6729" LastActivityDate="2017-08-28T01:54:14.147" Title="Multiple Monitors not functioning properly" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8416" PostTypeId="2" ParentId="8404" CreationDate="2016-10-01T17:39:07.710" Score="1" Body="&lt;p&gt;Try installing the new &lt;a href=&quot;https://community.skype.com/t5/Linux/Skype-for-Linux-Alpha-and-calling-on-Chrome-amp-Chromebooks/td-p/4434299&quot; rel=&quot;nofollow&quot;&gt;Skype Alpha for Linux&lt;/a&gt;. I am using it and it works like a charm.&lt;/p&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2016-10-01T17:39:07.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8418" PostTypeId="2" ParentId="8352" CreationDate="2016-10-01T17:51:48.343" Score="1" Body="&lt;p&gt;This sounds like it is a problem with the compatibility of the trackpad. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried plugging in a mouse, and see if that works? Also, actually installing the system (as opposed to running it from a USB pen) will increase your chance at a fully working system since a bunch of software is installed from the web too (on top of the core stuff on the pen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, you'll be able to update the system to bleeding edge, as Elementary keep releasing bug fixes at a OS level (this includes &lt;a href=&quot;http://blog.elementary.io/post/150787296131/loki-release-follow-up&quot; rel=&quot;nofollow&quot;&gt;a track pad fix&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2016-10-01T17:51:48.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8419" PostTypeId="2" ParentId="8382" CreationDate="2016-10-01T17:52:02.743" Score="3" Body="&lt;p&gt;SOLVED the problem was that secure boot was enabled, now wireless connection is shown in the option and works!&lt;/p&gt;&#xA;" OwnerUserId="6698" LastActivityDate="2016-10-01T17:52:02.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8420" PostTypeId="2" ParentId="8407" CreationDate="2016-10-01T17:54:08.880" Score="0" Body="&lt;p&gt;The elementary team issued a &lt;a href=&quot;http://blog.elementary.io/post/150787296131/loki-release-follow-up&quot; rel=&quot;nofollow&quot;&gt;fix for trackpad issues&lt;/a&gt; recently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is your system up-to-date with the most recent version? You can check in AppCenter under the section Updates or alternatively upgrade your system by typing the following in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6364" LastEditorUserId="68" LastEditDate="2016-10-01T20:34:16.877" LastActivityDate="2016-10-01T20:34:16.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8421" PostTypeId="2" ParentId="8415" CreationDate="2016-10-01T18:43:18.457" Score="4" Body="&lt;p&gt;(This might be a bug, but on my system, Loki's Displays settings do not naturally let users stack screens atop each other, either with the secondary directly above the primary or vice versa, though I can futz around with it to make it work.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NqvQb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NqvQb.png&quot; alt=&quot;Push to the left/right&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not being able to drag the window through the menu bar is likely by design—that would be a confusing scenario when the menu bar goes solid. So let's fix your second scenario, where you set the external monitor (the one on top) as the primary. Firstly, that your laptop's monitor does not regain control as the primary when the external is disconnected, so I reported it as a bug you can follow &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629594&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Until it's patched, you'll have to either change the setting manually in your Displays settings or run a command as needed to reset your connected monitor as the primary:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you're ever out of options (nothing to click on) and need a terminal, press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;, which should bring up a TTY screen. (Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; to return.)&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;xrandr -q&lt;/code&gt; to see all connected monitors and pick the one you want to target (not sure what it would be called for an internal screen [report back?] but mine is &quot;HDMI-0&quot;, for instance)&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;xrandr --output HDMI-0 --primary&lt;/code&gt; to set a specific screen (HDMI-0) as the primary&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'll report back when the bug is addressed.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-01T18:43:18.457" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8422" PostTypeId="2" ParentId="8413" CreationDate="2016-10-01T18:56:57.347" Score="6" Body="&lt;p&gt;This is a bug &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1592432&quot; rel=&quot;noreferrer&quot;&gt;reported here&lt;/a&gt; if you could contribute your laptop model there for testing purposes. (The issue appears to be that the synaptics driver does not take precedence over the libinput driver.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some of the reporters had some success from installing synaptics and changing libinput's priority:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install xserver-xorg-input-synaptics&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo mv /usr/share/X11/xorg.conf.d/90-libinput.conf /usr/share/X11/xorg.conf.d/45-libinput.conf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Give that a reboot and let us know how it goes? It would also be useful to report back to the bug discussion.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-01T18:56:57.347" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8423" PostTypeId="2" ParentId="8409" CreationDate="2016-10-01T19:12:51.937" Score="0" Body="&lt;p&gt;This is a bug, now &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629597&quot; rel=&quot;nofollow&quot;&gt;reported here&lt;/a&gt;. (We won't be able to offer more than a jury-rigged solution around it as the main issue is fixing the bug.) If you're willing, subscribe to that bug report and add more details (computer model, graphics card information) so that someone can help address the bug. Also, does this bug recur even after restarting your computer?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-01T19:12:51.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8424" PostTypeId="2" ParentId="8407" CreationDate="2016-10-01T20:13:26.653" Score="0" Body="&lt;p&gt;My problem is resolved, I posted this issue on several forums so, I got solution from one of them, I only edit touch pad setting in my bios, It was set to Advance I have set it to Basic and its working perfect for me.&lt;/p&gt;&#xA;" OwnerUserId="6719" LastActivityDate="2016-10-01T20:13:26.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8425" PostTypeId="2" ParentId="5399" CreationDate="2016-10-01T20:13:54.007" Score="13" Body="&lt;h1&gt;Adjust scroll speed&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;This is based directly on an &lt;a href=&quot;https://askubuntu.com/a/621140/413066&quot;&gt;answer&lt;/a&gt; to a &lt;a href=&quot;https://askubuntu.com/questions/285689/increase-mouse-wheel-scroll-speed/621140#621140&quot;&gt;similar question on AskUbuntu&lt;/a&gt; by user &lt;a href=&quot;https://askubuntu.com/users/385212/stvn66&quot;&gt;stvn66&lt;/a&gt;. I have tested it under &lt;strong&gt;elementary OS 0.4 Loki&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately there is no simple setting to adjust scrolling speed right now, which seems to be a problem for many Linux based operating systems, not only elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently the best option is to install &lt;code&gt;imwheel&lt;/code&gt;, for example by typing the following in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install imwheel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then create the file &lt;code&gt;~/.imwheelrc&lt;/code&gt; containing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;.*&quot;&#xA;None,      Up,   Button4, 5&#xA;None,      Down, Button5, 5&#xA;Control_L, Up,   Control_L|Button4&#xA;Control_L, Down, Control_L|Button5&#xA;Shift_L,   Up,   Shift_L|Button4&#xA;Shift_L,   Down, Shift_L|Button5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where you should try different values for &lt;code&gt;#&lt;/code&gt; in the lines 2–3:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;None,      Up,   Button4, #&#xA;None,      Up,   Button5, #&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then stop and restart imwheel to test the settings by using the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall imwheel&#xA;imwheel -b &quot;4 5&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please note that at least for me this does increase the scrolling speed of the scroll wheel &lt;em&gt;and&lt;/em&gt; the touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If everything works as expected, you can add this tool to start automatically once you log in. Go to System Settings → Applications → Startup, click the &quot;+&quot; button in the bottom left, type in &lt;code&gt;imwheel -b &quot;4 5&quot;&lt;/code&gt; and submit by pressing enter.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2016-10-01T23:58:04.717" LastActivityDate="2016-10-01T23:58:04.717" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8426" PostTypeId="1" AcceptedAnswerId="8427" CreationDate="2016-10-01T20:39:40.207" Score="0" ViewCount="3361" Body="&lt;p&gt;There are &lt;a href=&quot;http://www.cyberciti.biz/hardware/howto-linux-hard-disk-encryption-with-luks-cryptsetup-command/&quot; rel=&quot;nofollow&quot;&gt;tutorials&lt;/a&gt; for setting up LUKS encryption on secondary drives in elementary OS, but is there a simpler way to do this with the existing graphical interface?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-01T22:53:14.357" Title="How can I encrypt a drive with LUKS" Tags="|disk-management|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8427" PostTypeId="2" ParentId="8426" CreationDate="2016-10-01T20:39:40.207" Score="0" Body="&lt;h3&gt;The easiest way is to install &lt;code&gt;gnome-disk-utility&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install gnome-disk-utility&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;which you can run as &lt;code&gt;gnome-disks&lt;/code&gt; in the Terminal or as &amp;quot;Disks&amp;quot; from the Applications menu. Then simply select the drive and in the &amp;quot;Type&amp;quot; selector, choose the LUKS encryption option. It will prompt for a password  (for the drive, not necessarily your login password) and you're good to go!&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8mWDH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8mWDH.png&quot; alt=&quot;LUKS&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You'll be asked on your next reboot how you'd like to unlock/mount the drive in the future. If you'd like to compare the options, look &lt;a href=&quot;https://security.stackexchange.com/q/108242/125239&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w62Aa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w62Aa.png&quot; alt=&quot;Enter a passphrase to unlock the volume&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-10-01T22:53:14.357" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8428" PostTypeId="2" ParentId="7270" CreationDate="2016-10-01T21:52:30.097" Score="1" Body="&lt;p&gt;Right. There is a bug (&lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-useraccounts/+bug/1495348&quot; rel=&quot;nofollow noreferrer&quot;&gt;filed here&lt;/a&gt;) that changing your password while your encrypted home directory is mounted doesn't also change the encryption password of that encrypted directory. (It's possible that's by design for security.) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But you should still have the command if you want to change the password of your partition. Assuming your password has already changed (hence the issue), first mount the drive with your &lt;strong&gt;old&lt;/strong&gt; password:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;ecryptfs-mount-private&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then re-wrap the password with your new one:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;ecryptfs-rewrap-passphrase ~/.ecryptfs/wrapped-passphrase&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are locked out of your system, press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; at the lock screen for the &lt;a href=&quot;https://askubuntu.com/q/66195/49899&quot;&gt;&lt;code&gt;TTY&lt;/code&gt;&lt;/a&gt; (full-screen terminal) and login there to run these commands.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-09T05:42:32.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8429" PostTypeId="2" ParentId="8408" CreationDate="2016-10-01T23:03:22.507" Score="6" Body="&lt;p&gt;You have installed a theme which generally only applies to applications which use GTK+ 3, for example all default apps in elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are other toolkits used by developers for Linux apps where GTK+ themes will not be applied at all or at least differently. Here is a (non comprehensive) list of toolkits and notable examples of apps using them: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;XUL&lt;/strong&gt; is used by Firefox and Thunderbird&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Qt&lt;/strong&gt; is by used by VLC and apps from the KDE project&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;wxWidgets&lt;/strong&gt; is used by FileZilla&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;VCL&lt;/strong&gt; is used by LibreOffice&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;GTK+ 2&lt;/strong&gt; is generally used by older apps and its themes are not compatible with GTK+ 3 themes&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Uniform_look_for_Qt_and_GTK_applications#QGtkStyle&quot;&gt;QGtkStyle&lt;/a&gt; (link for general info, might not apply to elementary) imitates the look of GTK+ 2 themes in Qt apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not really sure, but I believe the way the FileZilla version available in Loki is compiled, it also tries to imitate the given GTK+ 2 theme. So in order for the app to look better, you have to find an appropriate GTK+ 2 theme and install it as well.&lt;/p&gt;&#xA;" OwnerUserId="68" LastEditorUserId="68" LastEditDate="2016-10-01T23:08:33.490" LastActivityDate="2016-10-01T23:08:33.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8430" PostTypeId="2" ParentId="8123" CreationDate="2016-10-02T00:46:45.510" Score="0" Body="&lt;p&gt;The Pantheon shell is the main desktop component of the Elementary project. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is deeply integrated with other applications like the dock called Plank , the top panel Wingpanel , application launcher Slingshot and comes with its own window manager Gala, which is based on Mutter .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're trying to install the dock you should try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt update&#xA; sudo apt install plank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="578" LastEditDate="2016-11-15T00:16:59.557" LastActivityDate="2016-11-15T00:16:59.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8431" PostTypeId="1" AcceptedAnswerId="8432" CreationDate="2016-10-02T01:51:49.457" Score="1" ViewCount="44" Body="&lt;p&gt;What's the easiest way to write over a hard disk (such that you could give it to a friend, etc.) on elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T01:51:49.457" Title="How to zero out a disk" Tags="|security|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8432" PostTypeId="2" ParentId="8431" CreationDate="2016-10-02T01:51:49.457" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;Run &lt;strong&gt;&lt;code&gt;sudo fdisk -l&lt;/code&gt;&lt;/strong&gt; to determine which &lt;strong&gt;&lt;code&gt;/dev/sdX&lt;/code&gt;&lt;/strong&gt; drive you will rewrite. (The drives are listed in an order: &lt;code&gt;sda&lt;/code&gt; for your main drive, &lt;code&gt;sdb&lt;/code&gt;, &lt;code&gt;sdc&lt;/code&gt;, etc. for your remaining drives.) Use that path in place of &lt;strong&gt;&lt;code&gt;sdX&lt;/code&gt;&lt;/strong&gt; in the next command:&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;strong&gt;&lt;code&gt;sudo dd if=/dev/zero of=/dev/sdX status=progress&lt;/code&gt;&lt;/strong&gt; to write zeros to your disk. (&lt;code&gt;status=progress&lt;/code&gt; is a recent addition to see the process's status—it might not work on your system.)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you'd prefer to use a GUI, &lt;a href=&quot;https://launchpad.net/gdiskdump&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;gdiskdump&lt;/code&gt;&lt;/a&gt; is relatively straightforward, but I think the above is easier than installing software for a single operation. To install, run &lt;code&gt;sudo apt install gdiskdump&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T01:51:49.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8433" PostTypeId="2" ParentId="8123" CreationDate="2016-10-02T02:05:02.713" Score="2" Body="&lt;p&gt;Have you tried dragging your mouse along the bottom/sides of your screen, in case it is set to auto-hide?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still have your menu bar, go to &lt;code&gt;Applications &amp;gt; System Settings &amp;gt; Desktop &amp;gt; Dock&lt;/code&gt; to change its settings. If it isn't set to disappear, try toggling it hidden and unhidden to see if it comes back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9Rj9f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9Rj9f.png&quot; alt=&quot;Desktop &amp;gt; Dock&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it isn't back, let's check if it's running (the dock's process name is &lt;code&gt;plank&lt;/code&gt;) with a command that shows all running processes, filtered for all lines with &quot;plank&quot; (open Terminal from Applications):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;ps cax | grep plank&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;plank&lt;/code&gt; isn't running, run the command &lt;strong&gt;&lt;code&gt;plank&lt;/code&gt;&lt;/strong&gt;, and let us know what you see? You shouldn't have to install the dock (as in the other answer) because it comes with the operating system (unless for some reason it has been uninstalled).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T02:05:02.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8434" PostTypeId="1" CreationDate="2016-10-02T03:22:12.440" Score="0" ViewCount="1133" Body="&lt;p&gt;I have an Nvidia card. Was using Freya until a few hours ago, installed Loki and now the HDMI is 100% not working. The secondary display (a Hitachi TV) shows no signal at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; as instructed &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8330/9&quot;&gt;here&lt;/a&gt;, but it did nothing. I installed the Nvidia X Server Settings from the App Center, also nothign.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Drivers available originally:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C09t9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C09t9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I upgraded the Nvidia drivers to 340.98:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TSRVb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TSRVb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Info:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lspci -k | grep -A 3 &quot;VGA&quot;&#xA;01:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1)&#xA;    Subsystem: ZOTAC International (MCO) Ltd. G96 [GeForce 9500 GT]&#xA;    Kernel driver in use: nouveau&#xA;    Kernel modules: nvidiafb, nouveau, nvidia_340&#xA;&#xA;$ sudo ubuntu-drivers devices&#xA;== /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0 ==&#xA;model    : G96 [GeForce 9500 GT]&#xA;vendor   : NVIDIA Corporation&#xA;modalias : pci:v000010DEd00000640sv000019DAsd00006046bc03sc00i00&#xA;driver   : nvidia-304 - third-party free&#xA;driver   : xserver-xorg-video-nouveau - distro free builtin&#xA;driver   : nvidia-340 - third-party free recommended&#xA;&#xA;== cpu-microcode.py ==&#xA;driver   : amd64-microcode - distro non-free&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What can I do to fix this?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-02T14:44:06.503" Title="HDMI completely broken in Loki?" Tags="|release-loki|hdmi|" AnswerCount="1" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="8435" PostTypeId="2" ParentId="4122" CreationDate="2016-10-02T04:02:38.023" Score="2" Body="&lt;p&gt;&lt;strong&gt;No&lt;/strong&gt;, the dark theme is not officially supported. It can be installed manually, as you did, or through &lt;a href=&quot;https://elementaryos.stackexchange.com/q/6828/5565&quot;&gt;&lt;code&gt;elementary-tweaks&lt;/code&gt;&lt;/a&gt; (which is doubly unsupported by the devs). I tested the dark theme for a few days, but found that only a few apps actually supported the theme and the rest did their own thing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This doesn't mean that app maintainers won't take bug reports on making their apps work better across themes, but the devs certainly don't have dark theme use cases in mind when shipping the main OS. As a rule, if it isn't in the main Settings and it isn't a feature request, it's likely not within the purview of the small dev team. (I personally don't think it would be a bad feature to have, so perhaps you'd like to &lt;a href=&quot;https://elementary.io/get-involved&quot; rel=&quot;nofollow noreferrer&quot;&gt;join in&lt;/a&gt;?)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-02T04:02:38.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8436" PostTypeId="2" ParentId="865" CreationDate="2016-10-02T04:11:21.377" Score="1" Body="&lt;p&gt;This screenshot is from the Loki release, so it might be a little different, but you can adjust your sound settings from &lt;code&gt;System Settings &amp;gt; Sound&lt;/code&gt;. Make sure your sound isn't all the way down and try jumping between the different outputs and using the &quot;Test Sound&quot; button to make the audio play back. (In Loki, the new release, you can do some of this direct from the icon in the OS's upper-right corner.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5WvKU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5WvKU.png&quot; alt=&quot;Sound&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't solve your issue, try posting more specific information on what you have tried and what isn't working as expected.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T04:11:21.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8437" PostTypeId="2" ParentId="2891" CreationDate="2016-10-02T08:16:13.980" Score="1" Body="&lt;p&gt;The power indicator (package &lt;code&gt;wingpanel-indicator-power&lt;/code&gt;) in elementary OS is not the same as the battery indicator of Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This functionality does not exist here, so you cannot &quot;activate&quot; it.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-02T08:16:13.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8438" PostTypeId="2" ParentId="2908" CreationDate="2016-10-02T08:22:52.693" Score="1" Body="&lt;p&gt;Don't know for Freya but in Loki these shortcuts have effectively been changed to &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Left&lt;/kbd&gt;/&lt;kbd&gt;Right&lt;/kbd&gt; and they are working all right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cf., &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1062/what-is-the-keyboard-shortcut-to-move-across-workspaces&quot;&gt;What is the keyboard shortcut to move across workspaces?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-10-02T08:22:52.693" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8439" PostTypeId="2" ParentId="3195" CreationDate="2016-10-02T08:50:52.627" Score="1" Body="&lt;p&gt;Sadly, you cannot because even if &lt;code&gt;xdotool&lt;/code&gt; can generate events like key (a given keystroke), key up (a given key released) and key down (a given key pressed), you cannot map them with Keyboard Shortcuts because the latter handles only simple keystroke events. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You would need a tool that can map the press/release events as well.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-02T08:50:52.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8440" PostTypeId="1" CreationDate="2016-10-02T09:54:32.360" Score="1" ViewCount="1005" Body="&lt;p&gt;Upgrading fails because of the package &lt;code&gt;appstream-data-pantheon-loki-stable-icons&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree         &#xA;Reading state information... Done  &#xA;You might want to run 'apt-get -f install' to correct these.  &#xA;The following packages have unmet dependencies:  &#xA; appstream-data-pantheon-loki-stable-icons : Depends: appstream-data-pantheon-loki-stable but it is not installed  &#xA;E: Unmet dependencies. Try using -f.&#xA;&#xA;$ sudo apt-get -f install  &#xA;Reading package lists... Done  &#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:  &#xA;  appstream-data-pantheon appstream-data-pantheon-icons&#xA;Use 'sudo apt autoremove' to remove them.  &#xA;The following additional packages will be installed:  &#xA;  appstream-data-pantheon-loki-stable  &#xA;The following NEW packages will be installed:  &#xA;  appstream-data-pantheon-loki-stable  &#xA;0 upgraded, 1 newly installed, 0 to remove and 28 not upgraded.  &#xA;8 not fully installed or removed.  &#xA;Need to get 0 B/70,2 kB of archives.  &#xA;After this operation, 78,8 kB of additional disk space will be used.  &#xA;Do you want to continue? [Y/n]   &#xA;Selecting previously unselected package appstream-data-pantheon-loki-stable.  &#xA;(Reading database ... 266701 files and directories currently installed.)&#xA;Preparing to unpack .../appstream-data-pantheon-loki-stable_0.4+r13~ubuntu0.4.1_all.deb ...  &#xA;Unpacking appstream-data-pantheon-loki-stable (0.4+r13~ubuntu0.4.1) ...  &#xA;dpkg: error processing archive /var/cache/apt/archives/appstream-data-pantheon-loki-stable_0.4+r13~ubuntu0.4.1_all.deb (--unpack):  &#xA; trying to overwrite '/usr/share/app-info/yaml/pantheon_xenial-main_amd64.yml.gz', which is also in package appstream-data-pantheon 0.3.0-0~10~ubuntu0.4.1  &#xA;Processing triggers for appstream (0.9.4-1ubuntu1) ...  &#xA;AppStream cache update completed successfully.  &#xA;Errors were encountered while processing:  &#xA; /var/cache/apt/archives/appstream-data-pantheon-loki-stable_0.4+r13~ubuntu0.4.1_all.deb  &#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additional Info: First I had the beta version of elementary OS installed and then upgraded to the stable 0.4 version - don't know if this has something to do with it.&lt;/p&gt;&#xA;" OwnerUserId="6737" LastEditorUserId="26" LastEditDate="2016-10-02T16:12:29.663" LastActivityDate="2019-08-20T01:00:45.433" Title="apt-get upgrade error because of appstream-data-pantheon-loki-stable-icons - 0.4" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="0" ClosedDate="2019-10-22T03:31:45.357" ContentLicense="CC BY-SA 3.0" />
  <row Id="8441" PostTypeId="2" ParentId="7421" CreationDate="2016-10-02T10:17:24.853" Score="1" Body="&lt;p&gt;There isnt a config file in Files for this but you could try bookmarking the server - this might save the port in the address&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-10-02T10:17:24.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8442" PostTypeId="2" ParentId="8434" CreationDate="2016-10-02T14:44:06.503" Score="2" Body="&lt;p&gt;I finally managed to fix this issue following steps given here &lt;a href=&quot;https://askubuntu.com/questions/481414/install-nvidia-driver-instead-nouveau&quot;&gt;Install Nvidia driver instead nouveau&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue was that, although the nvidia drivers were correctly installed, the nouveau drivers were still being used, even if the nvidia drivers were selected in 'Software &amp;amp; Updates'/Additional drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps I followed:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Blacklist the modules. Open the blacklist.conf file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;add the following modules in the file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blacklist vga16fb&#xA;blacklist nouveau&#xA;blacklist rivafb&#xA;blacklist nvidiafb&#xA;blacklist rivatv&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the file and exit.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update the initramfs disk.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-02T14:44:06.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8443" PostTypeId="2" ParentId="3379" CreationDate="2016-10-02T14:47:49.880" Score="4" Body="&lt;p&gt;I'm going to preface this with a nod to the fact that I work on &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;, and thanks to that have access to lots of lovely metrics mere mortals are not normally privy to.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Transmission (38%)&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://transmissionbt.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Transmission&lt;/a&gt; is by far the most popular torrent client, more than a third of torrent users use it and it comes with some reasonably nice GTK support. This provides a nice, clean, open-source client that is easy to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4bbGc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4bbGc.png&quot; alt=&quot;Transmission under a system that isn&amp;#39;t elementary OS.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;µTorrent (24% +1.6%)&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Second up is &lt;a href=&quot;http://www.utorrent.com/intl/en/&quot; rel=&quot;nofollow noreferrer&quot;&gt;µTorrent&lt;/a&gt;, sometimes uTorrent because it's easier to type. It's been around a long time and has had a lot of controversy over the years. It's ad-supported by default but does have some nifty features built in for finding torrents.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/myODs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/myODs.png&quot; alt=&quot;uTorrent on another system. Yeah, I gave up with their fancy name.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;qBittorrent (16%)&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.qbittorrent.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;qBittorrent &lt;/a&gt; is a Qt toolkit knock-off of uTorrent, and because of the mismatched toolkits probably doesn't look quite so nice on elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Qthqn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qthqn.png&quot; alt=&quot;qBittorrent&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Deluge (6.6%)&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Finally, &lt;a href=&quot;http://deluge-torrent.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Deluge&lt;/a&gt; is another open-source client, available for practically every system. This is a common linux-enthusiasts favourite.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/K2Ui3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K2Ui3.png&quot; alt=&quot;Deluge on an older GTK system.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-10-02T14:47:49.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8444" PostTypeId="1" AcceptedAnswerId="8602" CreationDate="2016-10-02T15:03:58.853" Score="0" ViewCount="169" Body="&lt;p&gt;I'm having an issue with my laptop, all USB that I plug on the only one USB input (other is USB-C) of my laptop are not recognized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using elementary OS with an updated kernel (I tried to go back to default kernel but don't change).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I have an error at laptop boot but don't know if it's important.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Error from &lt;code&gt;dmesg&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;acpi MSFT0101:00: platform device creation failed: -16&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsusb&lt;/code&gt; when the usb is plugged in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 003: ID 04f2:b59a Chicony Electronics Co., Ltd &#xA;Bus 001 Device 002: ID 8087:0a2b Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsblk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT&#xA;sda      8:0    0 119,2G  0 disk &#xA;├─sda1   8:1    0   512M  0 part /boot/efi&#xA;├─sda2   8:2    0 114,8G  0 part /&#xA;└─sda3   8:3    0   3,9G  0 part [SWAP]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dmesg | tail -m 20&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[   20.796225] audit_printk_skb: 27 callbacks suppressed&#xA;[   20.796228] audit: type=1400 audit(1475419830.853:21): apparmor=&quot;STATUS&quot; operation=&quot;profile_replace&quot; name=&quot;docker-default&quot; pid=2034 comm=&quot;apparmor_parser&quot;&#xA;[   21.147449] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.&#xA;[   21.150390] Bridge firewalling registered&#xA;[   21.154004] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready&#xA;[   21.326738] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)&#xA;[   21.346499] ip_tables: (C) 2000-2006 Netfilter Core Team&#xA;[   21.394647] Initializing XFRM netlink socket&#xA;[   21.438479] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready&#xA;[   21.561802] fuse init (API version 7.25)&#xA;[   24.351159] wlp1s0: authenticate with fc:b4:e6:3b:12:de&#xA;[   24.360894] wlp1s0: send auth to fc:b4:e6:3b:12:de (try 1/3)&#xA;[   24.366061] wlp1s0: authenticated&#xA;[   24.366895] wlp1s0: associate with fc:b4:e6:3b:12:de (try 1/3)&#xA;[   24.368293] wlp1s0: RX AssocResp from fc:b4:e6:3b:12:de (capab=0x1011 status=0 aid=2)&#xA;[   24.371018] wlp1s0: associated&#xA;[   24.371053] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready&#xA;[   25.959305] Bluetooth: RFCOMM TTY layer initialized&#xA;[   25.959313] Bluetooth: RFCOMM socket layer initialized&#xA;[   25.959321] Bluetooth: RFCOMM ver 1.11&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can provide something more just ask me. Thanks in advance for your help!&lt;/p&gt;&#xA;" OwnerUserId="6742" LastEditorUserId="5565" LastEditDate="2016-10-07T13:49:20.947" LastActivityDate="2016-10-08T20:25:38.250" Title="No USB drives recognized on my laptop" Tags="|kernel|usb-drive|laptop|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8446" PostTypeId="2" ParentId="8177" CreationDate="2016-10-02T16:12:27.260" Score="1" Body="&lt;p&gt;I think have the same issue! I have a MacBook Pro Pro &quot;Core i7&quot; 2.2 17&quot; Early 2011. &#xA;I've bought a new usb stick after seeing some usb issues during boot. I've redownloaded the Loki image, I've checked the download with sha256sum. I've flashed the usb stick with both UNetbootin and Startup Disk Creator. I've checked with Gparted that the disk has a &lt;code&gt;boot&lt;/code&gt; flag. &#xA;Some grub experiments:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;No changes: black screen&lt;/li&gt;&#xA;&lt;li&gt;Adding the &lt;code&gt;nomodeset&lt;/code&gt; and removing quiet splash gives a lot of &lt;code&gt;[ok]&lt;/code&gt;'s but then a black screen with the one &lt;code&gt;_&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Removing &lt;code&gt;file=/cdrom/preseed/ubuntu.seed&lt;/code&gt; and adding &lt;code&gt;live-media-path=/casper/ ignore_uuid&lt;/code&gt;, resulted in no errors but a fadeout to black. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Not sure what else to try...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been using Freya for months already on the same laptop, I'm just trying to upgrade to Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #1&lt;/strong&gt;: Flashed the USB stick with Freya 0.3.2, removed &lt;code&gt;quiet splash&lt;/code&gt; added &lt;code&gt;nomodeset&lt;/code&gt;. Worked like a charm, booted just fine...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #2&lt;/strong&gt;: Flashed USB stick with Ubuntu 16.04 LTS, removed &lt;code&gt;quiet splash&lt;/code&gt; added &lt;code&gt;nomodeset&lt;/code&gt;. Booted with the &lt;code&gt;[ok]&lt;/code&gt;'s, but ended in the black screen with the single &lt;code&gt;_&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #3&lt;/strong&gt;: I came the following docs which notes included warnings about bugs in the Startup Disk Creator. &lt;a href=&quot;https://help.ubuntu.com/community/Installation/FromUSBStick#Install_and_run_Startup_Disk_Creator_alias_usb-creator&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Installation/FromUSBStick#Install_and_run_Startup_Disk_Creator_alias_usb-creator&lt;/a&gt; I wasn't sure which mode I'm in (BIOS / UEFI) so I installed Virtual Box, created a virtual machine with Ubuntu 16, flashed the USB with Ubuntu 16 from there. Booted (for some reason 2 &lt;code&gt;EFI boot&lt;/code&gt;'s appeared, I tried both), removed &lt;code&gt;quiet splash&lt;/code&gt;, added &lt;code&gt;nomodeset&lt;/code&gt;. It booted with the &lt;code&gt;[ok]&lt;/code&gt;'s, but ended in the black screen with the single &lt;code&gt;_&lt;/code&gt;, again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #4&lt;/strong&gt;: Flashed USB stick with Ubuntu 16.10 (using Etcher this time). During boot 2 &lt;code&gt;EFI boot&lt;/code&gt;'s appeared, tried both. Removed &lt;code&gt;quiet splash&lt;/code&gt; added &lt;code&gt;nomodeset&lt;/code&gt;. Booted with the &lt;code&gt;[ok]&lt;/code&gt;'s, but ended in the black screen with the single &lt;code&gt;_&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #5&lt;/strong&gt;: Using usb stick of update #4, when I removed &lt;code&gt;quiet splash&lt;/code&gt; but didn't add &lt;code&gt;nomodeset&lt;/code&gt; it ends with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;fb: switching to radeondrmfb from EFI VGA&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #6&lt;/strong&gt;: Tried adding &lt;code&gt;nointremap&lt;/code&gt; (from: &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2303621&amp;amp;page=2&amp;amp;p=13547523#post13547523&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2303621&amp;amp;page=2&amp;amp;p=13547523#post13547523&lt;/a&gt;) resulted in same black screen with &lt;code&gt;_&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #7&lt;/strong&gt;: I checked my current grub parameters, from /etc/default/grub, the &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt;. They where: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;i8042.nomux=1 i8042.reset i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Resulted in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;fb: switching to radeondrmfb from EFI VGA&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #8&lt;/strong&gt;: Tried the above, with &lt;code&gt;nomodeset&lt;/code&gt;. That ends with the black screen with &lt;code&gt;_&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #9&lt;/strong&gt;: Following the instructions on the following page &lt;strong&gt;worked!&lt;/strong&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://orville.thebennettproject.com/articles/installing-ubuntu-14-04-lts-on-a-2011-macbook-pro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://orville.thebennettproject.com/articles/installing-ubuntu-14-04-lts-on-a-2011-macbook-pro/&lt;/a&gt;&lt;br&gt;&#xA;Checking &lt;code&gt;/etc/default/grub&lt;/code&gt; and &lt;code&gt;/etc/grub.d/10_linux&lt;/code&gt; I figured out I've done this to get Freya working. (Really wish I had a better memory)&#xA;This does however completely disables the Radeon graphical card, which also reminds me to why I couldn't hook up a second screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #10&lt;/strong&gt;: In an attempt to get the Radeon graphics card working I re-read the following forum post. One of the last steps it mentions is running the rEFInd install again in OS X. Doing this gave me the proper rEFInd boot screen which then included one Elementery OS option. This option also enabled the graphics card. So I could finally use external screens again and play some more demanding games. &#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2157775&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2157775&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-01-10T15:51:58.983" LastActivityDate="2017-01-10T15:51:58.983" CommentCount="15" ContentLicense="CC BY-SA 3.0" />
  <row Id="8450" PostTypeId="1" CreationDate="2016-10-02T19:20:18.963" Score="3" ViewCount="1638" Body="&lt;p&gt;I'm running Elementary Loki on an Dell Vostro 5480 with Intel Core i7-5500U and a NVIDIA GM108M [GeForce 830M] graphic board, so when I suspend, lock screen or the system automatically lock, and I come back, the screen just stay black, then I need force the system to shut down with the power button. All the drivers was installed. What can I do?&lt;/p&gt;&#xA;" OwnerUserId="6634" LastActivityDate="2016-10-21T21:37:21.217" Title="Crash after suspend or lock screen" Tags="|release-loki|system|graphic-drivers|hardware|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8451" PostTypeId="2" ParentId="8450" CreationDate="2016-10-02T19:31:13.657" Score="1" Body="&lt;p&gt;I had a similiar problem and reported it to launchpad, see: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1628929&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1628929&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalling elementary directly might fixed this issue for me, but I want to do further testing.&lt;/p&gt;&#xA;" OwnerUserId="6745" LastActivityDate="2016-10-02T19:31:13.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8453" PostTypeId="5" CreationDate="2016-10-02T20:00:40.203" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Dconf&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dconf&lt;/a&gt; and &lt;code&gt;dconf-editor&lt;/code&gt; manages configuration settings within the GNOME desktop environment, which is &lt;a href=&quot;https://elementary.io/open-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;used in elementary OS&lt;/a&gt;. It can be used to customize defaults in applications or to enable tweaks that were once deactivated by design.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/onNGe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/onNGe.png&quot; alt=&quot;from Wikipedia Commons: https://commons.wikimedia.org/wiki/File:Dconf_Editor_0.20.0.png&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T22:35:11.290" LastActivityDate="2016-10-02T22:35:11.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8454" PostTypeId="4" CreationDate="2016-10-02T20:00:40.203" Score="0" Body="Dconf is the hidden configuration settings used in the GNOME desktop environment (within elementary OS). Please also tag with the related application." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-02T22:35:34.450" LastActivityDate="2016-10-02T22:35:34.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8456" PostTypeId="2" ParentId="5228" CreationDate="2016-10-02T21:59:29.403" Score="1" Body="&lt;p&gt;While what you saw was &lt;a href=&quot;https://askubuntu.com/q/211848/49899&quot;&gt;likely a bug&lt;/a&gt; and I'm on Loki (the next release) and unable to check this in Freya, I think there are a few things worth clarifying. While elementary OS is based on Ubuntu Long Term Support editions, &quot;support&quot; has a really specific scope. Major Ubuntu releases are &quot;supported&quot; with fixes and upgrades &lt;a href=&quot;http://www.ubuntu.com/info/release-end-of-life&quot; rel=&quot;nofollow noreferrer&quot;&gt;for nine months&lt;/a&gt; and the five-year &quot;long term support&quot; is reserved to critical/security patches. The elementary OS is based atop Ubuntu but holds its own release schedule and &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8266/5565&quot;&gt;rarely has time to support prior releases&lt;/a&gt; following the next's release, save for major issues. (And there are surely plenty of bugs to squash in Loki...) This is all to say that elementary OS &quot;support&quot; is closer to nine months/one year: the latest release. While you can remain on Freya and hopefully receive Ubuntu's upstream base security updates, the rest of the elementary stuff atop Ubuntu will be left behind early into that five-year support period. But there likely isn't enough planning within the project to give an official list of &lt;em&gt;supported&lt;/em&gt; software when it changes so often.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;code&gt;ubuntu-support-status&lt;/code&gt;, which is a part of &lt;a href=&quot;https://launchpad.net/ubuntu/+source/update-manager&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;ubuntu-update-core&lt;/code&gt;&lt;/a&gt;, as far as I can tell, this is not intended to work with elementary OS, isn't included in the default repos, and hasn't been discussed in the bug tracker.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-02T21:59:29.403" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8457" PostTypeId="2" ParentId="6705" CreationDate="2016-10-02T22:40:58.763" Score="1" Body="&lt;p&gt;The poster found a solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove firefox-locale-*&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="26" LastEditDate="2016-10-03T07:27:00.980" LastActivityDate="2016-10-03T07:27:00.980" CommentCount="0" CommunityOwnedDate="2016-10-02T22:40:58.763" ContentLicense="CC BY-SA 3.0" />
  <row Id="8458" PostTypeId="2" ParentId="5211" CreationDate="2016-10-02T22:50:51.787" Score="1" Body="&lt;p&gt;&lt;strong&gt;Nope&lt;/strong&gt;, nothing like this is built into elementary OS or Ubuntu. If you'd like to request the feature more prominently, try &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+filebug&quot; rel=&quot;nofollow&quot;&gt;filing a wishlist request in the bug tracker&lt;/a&gt; or &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow&quot;&gt;creating a developer bounty&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best handwriting recognition program I found was &lt;a href=&quot;http://risujin.org/cellwriter/&quot; rel=&quot;nofollow&quot;&gt;&lt;strong&gt;CellWriter&lt;/strong&gt;&lt;/a&gt;: &lt;strong&gt;&lt;code&gt;sudo apt install cellwriter&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(You may need to install the universe repo if it isn't already active: &lt;code&gt;sudo add-apt-repository universe&lt;/code&gt;.) If you give it a try, let us know how it goes? (&lt;a href=&quot;https://www.reddit.com/r/linux/comments/1zl18j/are_there_good_handwriting_recognition_programs/?ref=share&amp;amp;ref_source=link&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; are some others.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T22:50:51.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8459" PostTypeId="2" ParentId="4643" CreationDate="2016-10-02T23:28:47.697" Score="1" Body="&lt;p&gt;The elementary apps are still in the process of standardization and I don't believe there are any hooks to easily add the feature you seek without rebuilding your own version of the software from the source. But, hey, if you do it, push the code upstream so that other developers can use it!&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-02T23:28:47.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8460" PostTypeId="2" ParentId="5085" CreationDate="2016-10-03T01:49:48.540" Score="2" Body="&lt;p&gt;Put this line where you want the script to pause and wait for you:&lt;/p&gt;&#xA;&lt;h3&gt;&lt;code&gt;read -p &amp;quot;Press any key to exit&amp;quot;&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://linuxcommand.org/lc3_man_pages/readh.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;read&lt;/code&gt;&lt;/a&gt; will display the quoted prompt with a trailing newline and wait for your feedback.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-10-03T01:49:48.540" CommentCount="0" CommunityOwnedDate="2016-10-03T01:49:48.540" ContentLicense="CC BY-SA 3.0" />
  <row Id="8461" PostTypeId="2" ParentId="4423" CreationDate="2016-10-03T02:04:14.287" Score="1" Body="&lt;p&gt;That line 91 line 109 ordeal was a bug. Most of the tickets I found in &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/&quot; rel=&quot;nofollow&quot;&gt;Launchpad (the bug tracker)&lt;/a&gt; went &lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=181919&quot; rel=&quot;nofollow&quot;&gt;ultimately unresolved&lt;/a&gt;, but perhaps they just weren't the main ticket.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried updating your system and installing &quot;Software &amp;amp; Updates&quot; to install the PPA manually?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt install software-properties-gtk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Has the problem been resolved and does it persist into your Loki upgrade?&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T02:04:14.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8462" PostTypeId="2" ParentId="3971" CreationDate="2016-10-03T02:34:02.863" Score="2" Body="&lt;p&gt;&lt;strong&gt;Nope&lt;/strong&gt;, there is no built-in way to do this. I've requested it as a feature &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1629743&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, where I suggest you subscribe as well, in case devs want feedback. If you'd like to request the feature more prominently, try &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow&quot;&gt;creating a developer bounty&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T02:34:02.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8463" PostTypeId="2" ParentId="8086" CreationDate="2016-10-03T03:33:35.297" Score="1" Body="&lt;p&gt;This application acts against common expectations, so I'd consider it a bug. Please &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-sound/+bug/1629761&quot; rel=&quot;nofollow&quot;&gt;subscribe to the &lt;strong&gt;bug report&lt;/strong&gt; here&lt;/a&gt; so that the devs can ask for help testing solutions. If you want to give the open source devs some extra incentive, try putting &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow&quot;&gt;a developer bounty&lt;/a&gt; on the task.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T03:33:35.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8464" PostTypeId="2" ParentId="7707" CreationDate="2016-10-03T03:51:05.927" Score="2" Body="&lt;p&gt;The easiest way to change the default application for a file type is to &lt;strong&gt;&lt;code&gt;right-click on any of such file type &amp;gt; Properties &amp;gt; Open with&lt;/code&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QGsjj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QGsjj.png&quot; alt=&quot;Properties&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you click on &quot;Other Application&quot;, you can &lt;strong&gt;&quot;Set as default&quot;&lt;/strong&gt; from the list of Recommended Applications. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mPN4b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mPN4b.png&quot; alt=&quot;Recommended&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now if your issue is that &lt;code&gt;gvim&lt;/code&gt; isn't even showing in these menus, try purging your old install and trying again with: &lt;strong&gt;&lt;code&gt;sudo apt install vim-gnome&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T03:51:05.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8465" PostTypeId="2" ParentId="7707" CreationDate="2016-10-03T05:20:50.970" Score="3" Body="&lt;p&gt;You can select it on Settings&gt;Applications on the Default tab from the &quot;Text Editor&quot; menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yvOoA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yvOoA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="146" LastActivityDate="2016-10-03T05:20:50.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8466" PostTypeId="2" ParentId="7638" CreationDate="2016-10-03T05:21:50.337" Score="1" Body="&lt;p&gt;That bug/feature request is the way to go. In fact, one exists, so please &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1325361&quot; rel=&quot;nofollow&quot;&gt;subscribe to the &lt;strong&gt;bug report&lt;/strong&gt; here&lt;/a&gt; for when the devs need help testing solutions. If you want to give the open source devs some extra incentive, try putting &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow&quot;&gt;a developer bounty&lt;/a&gt; on the task. And of course, if you're interested in &lt;a href=&quot;https://elementary.io/get-involved&quot; rel=&quot;nofollow&quot;&gt;writing it yourself&lt;/a&gt;...&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T05:21:50.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8467" PostTypeId="2" ParentId="4409" CreationDate="2016-10-03T05:26:46.940" Score="1" Body="&lt;p&gt;First get to a TTY terminal/command prompt with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;. (If it won't open, boot the computer into safe mode.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then edit this file: &lt;strong&gt;&lt;code&gt;gksudo gedit /usr/share/xsessions/pantheon.desktop&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and remove the line &lt;strong&gt;&lt;code&gt;Exec=gnome-session --session=pantheon&lt;/code&gt;&lt;/strong&gt; to kill your old session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(There is a &lt;code&gt;gnome.desktop&lt;/code&gt; file too with a similar line to remove, if for some reason you're using GNOME instead of Pantheon.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some potentially helpful links: &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2166672&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt;, &lt;a href=&quot;https://askubuntu.com/a/629329/49899&quot;&gt;2&lt;/a&gt;, &lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-03T05:26:46.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8468" PostTypeId="1" AcceptedAnswerId="8469" CreationDate="2016-10-03T06:34:15.960" Score="0" ViewCount="5267" Body="&lt;p&gt;I installed a fresh copy of elementary OS 0.4. I could find &lt;code&gt;ubuntu software center&lt;/code&gt; and &lt;code&gt;software &amp;amp; updates&lt;/code&gt;. I guess these were depreciated and replaced with the elementary version called &lt;code&gt;AppCenter&lt;/code&gt;. But how do I get them back.&lt;/p&gt;&#xA;" OwnerUserId="5682" LastActivityDate="2016-10-03T06:42:29.783" Title="get back ubuntu software center, software &amp; updates" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8469" PostTypeId="2" ParentId="8468" CreationDate="2016-10-03T06:42:29.783" Score="1" Body="&lt;p&gt;Open &lt;code&gt;Terminal&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install software-properties-gtk   # for Software &amp;amp; Updates&#xA;sudo apt install software-center           # for Ubuntu Software Center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T06:42:29.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8470" PostTypeId="2" ParentId="3868" CreationDate="2016-10-03T17:22:57.230" Score="1" Body="&lt;p&gt;This is a feature in Loki (the 2016 release). For example, &quot;Restart&quot; is highlighted below as I tab between the Shut Down menu options: &lt;a href=&quot;https://i.stack.imgur.com/AvlrE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AvlrE.png&quot; alt=&quot;Shutdown dialog box&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T17:22:57.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8471" PostTypeId="2" ParentId="4123" CreationDate="2016-10-03T17:57:43.923" Score="1" Body="&lt;p&gt;Abdul resolved this by &lt;strong&gt;&lt;a href=&quot;http://tuxdiary.com/2015/06/27/install-pantheon-desktop-ubuntu/&quot; rel=&quot;nofollow&quot;&gt;reinstalling the Pantheon desktop environment&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T17:57:43.923" CommentCount="0" CommunityOwnedDate="2016-10-03T17:57:43.923" ContentLicense="CC BY-SA 3.0" />
  <row Id="8472" PostTypeId="2" ParentId="7043" CreationDate="2016-10-03T18:56:42.300" Score="1" Body="&lt;p&gt;&lt;strong&gt;Clean your cache and try again:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt clean&#xA;sudo apt update&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that isn't enough, try removing any offending repositories from &lt;code&gt;Applications menu &amp;gt; Software &amp;amp; Updates&lt;/code&gt;. (If you need to install that, use &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;.)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-03T18:56:42.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8473" PostTypeId="1" CreationDate="2016-10-03T19:18:00.247" Score="1" ViewCount="285" Body="&lt;p&gt;When first booting up my MacBook Pro running Elementary OS, there's a rather loud startup sound effect. I have my desktop volume turned all the way down and also toggled off, however this doesn't seem to affect the startup sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to disable this?&lt;/p&gt;&#xA;" OwnerUserId="6761" LastEditorUserId="5565" LastEditDate="2016-10-03T19:53:57.853" LastActivityDate="2016-10-03T20:00:34.973" Title="How to disable startup chime?" Tags="|boot|sound|macbook|startup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8474" PostTypeId="2" ParentId="7688" CreationDate="2016-10-03T19:41:08.867" Score="2" Body="&lt;p&gt;I had similar problem (but I have Intel® HD Graphics 5500).&lt;br&gt;&#xA;So thanks to your suggestion I faked the /etc/lsb-release with following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=Ubuntu&#xA;DISTRIB_RELEASE=16.04&#xA;DISTRIB_CODENAME=xenial&#xA;DISTRIB_DESCRIPTION=&quot;Ubuntu 16.04 LTS&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;During the first time I had problems with PPAs, therefore I had to disable all sources marked as 'broken'. I have run the command &lt;code&gt;sudo intel-graphics-update-tool&lt;/code&gt; which gave me possibility to see all broken sources in one shot.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After having done that the installation was successful with following report:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Added:&#xA;autotools-dev:all (20150820.1)&#xA;debhelper:all (9.20160115ubuntu3)&#xA;dh-strip-nondeterminism:all (0.015-1)&#xA;i915-4.6.3-4.4.0-dkms:all (1)&#xA;intel-gpu-tools:amd64 (1.15-1intel1)&#xA;libegl1-mesa-drivers:amd64 (11.2.2-0intel1)&#xA;libfile-stripnondeterminism-perl:all (0.015-1)&#xA;libgles1-mesa:amd64 (11.2.2-0intel1)&#xA;libgles2-mesa:amd64 (11.2.2-0intel1)&#xA;libmail-sendmail-perl:all (0.79.16-1)&#xA;libosmesa6:amd64 (11.2.2-0intel1)&#xA;libsys-hostname-long-perl:all (1.5-1)&#xA;libunwind8:amd64 (1.1-4.1)&#xA;libva-drm1:amd64 (1.7.1-0intel1)&#xA;libva-egl1:amd64 (1.7.1-0intel1)&#xA;libva-glx1:amd64 (1.7.1-0intel1)&#xA;libva-tpi1:amd64 (1.7.1-0intel1)&#xA;libva-wayland1:amd64 (1.7.1-0intel1)&#xA;libva-x11-1:amd64 (1.7.1-0intel1)&#xA;po-debconf:all (1.0.19)&#xA;vainfo:amd64 (1.7.1-0intel1)&#xA;&#xA;Upgraded:&#xA;i965-va-driver:amd64 (from 1.7.0-1 to 1.7.1-0intel1)&#xA;libcairo2:amd64 (from 1.14.6-1 to 1.15.2-0intel1)&#xA;libdrm-intel1:amd64 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm-intel1:i386 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm-nouveau2:amd64 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm-nouveau2:i386 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm-radeon1:amd64 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm-radeon1:i386 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm2:amd64 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libdrm2:i386 (from 2.4.67-1ubuntu0.16.04.2 to 2.4.68-1)&#xA;libegl1-mesa:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libgbm1:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libgl1-mesa-dri:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libgl1-mesa-dri:i386 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libgl1-mesa-glx:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libgl1-mesa-glx:i386 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libglapi-mesa:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libglapi-mesa:i386 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libva1:amd64 (from 1.7.0-1 to 1.7.1-0intel1)&#xA;libwayland-egl1-mesa:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;libxatracker2:amd64 (from 11.2.0-1ubuntu2.2 to 11.2.2-0intel1)&#xA;va-driver-all:amd64 (from 1.7.0-1 to 1.7.1-0intel1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="575" LastActivityDate="2016-10-03T19:41:08.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8475" PostTypeId="2" ParentId="8208" CreationDate="2016-10-03T19:43:06.637" Score="0" Body="&lt;p&gt;You must to disable N to better performance. If your connection drop down after some minutes of use, disable power management.  You can do this adding these options in a config file. From terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options iwlwifi 11n_disable=8 power_save=0 &quot; | sudo tee /etc/modprobe.d/iwlwiwi.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart and share your experience.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-10-03T19:43:06.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8476" PostTypeId="2" ParentId="8473" CreationDate="2016-10-03T19:53:40.563" Score="1" Body="&lt;p&gt;This will depend on how you're booting into elementary OS. Most of the solutions I found were specific to booting into OS X, so you might have  more options if you still have OS X installed and/or are dual-booting. The startup chime should respect the latest software settings. I'd try the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Mute the audio in OS X and see if the chime plays on reboot.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run &lt;code&gt;osascript -e 'set volume with output muted'&lt;/code&gt; in Terminal before exiting OS X and see if the chime plays on reboot, or whether it continues to play on reboot after only booting into elementary OS.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;As far as I know, there is no easy way to touch that &lt;code&gt;osascript&lt;/code&gt; (&lt;a href=&quot;http://ss64.com/osx/osascript.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppleScript&lt;/a&gt;) functionality in Linux, but &lt;a href=&quot;http://svn.python.org/projects/stackless/Python-2.4.3/dev/Mac/Demo/applescript.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; is a lead if you want to hack around. If none of the above works, I'd attempt some commands from &lt;a href=&quot;https://superuser.com/q/105420/57016&quot;&gt;here&lt;/a&gt; or &lt;a href=&quot;http://www.howtogeek.com/260693/how-to-disable-the-boot-sound-or-startup-chime-on-a-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, but do report back so we can find out what works!&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2016-10-03T20:00:34.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8477" PostTypeId="1" CreationDate="2016-10-03T21:24:50.723" Score="2" ViewCount="79" Body="&lt;p&gt;I have noticed a weird behavior on Loki. Some apps like Document Viewer or videos in Firefox are switching to a new workspace when chosen to be viewed on fullscreen option and returning to the old workspace when fullscreen is turned off. I don't remember Freya did this. Is this caused by Loki or is it just my system doing this? If not is there any way to keep the apps work fullscreen on the same workspace?&lt;/p&gt;&#xA;" OwnerUserId="6564" LastActivityDate="2016-10-03T21:24:50.723" Title="Fullscreen videos &amp; some apps are viewed in a new workspace" Tags="|workspace|" AnswerCount="0" CommentCount="4" ClosedDate="2016-12-28T18:52:56.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="8478" PostTypeId="2" ParentId="7763" CreationDate="2016-10-03T21:44:17.390" Score="1" Body="&lt;p&gt;I've got the same problem (sources.list below).  I created a USB Live using Unetbootin (on a Mac).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb cdrom:[elementary OS 0.4 _Loki_ - Stable amd64 (20160909)]/ xenial contrib main non-free&#xA;deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse&#xA;deb-src http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse&#xA;deb-src http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse&#xA;deb-src http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found a solution: I commented out the first line of the &lt;code&gt;sources.list&lt;/code&gt; (the CD-ROM one). I was also getting appstream errors, so I followed this workaround: &lt;a href=&quot;http://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1601971&quot; rel=&quot;nofollow&quot;&gt;http://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1601971&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: sources.list keeps adding the offending line again, so i keep having to edit sources.list to fix it.  Should I log this as a bug?&lt;/p&gt;&#xA;" OwnerUserId="6694" LastEditorUserId="6694" LastEditDate="2016-10-05T09:44:32.400" LastActivityDate="2016-10-05T09:44:32.400" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8484" PostTypeId="2" ParentId="8384" CreationDate="2016-10-04T06:56:05.123" Score="2" Body="&lt;p&gt;I added &lt;code&gt;network-manager-vpnc&lt;/code&gt; and &lt;code&gt;network-manager-vpnc-gnome&lt;/code&gt; with &lt;code&gt;apt-get install&lt;/code&gt;. After that I am able to add the Connection with GUI tools.&lt;/p&gt;&#xA;" OwnerUserId="6767" LastEditorUserId="5565" LastEditDate="2016-10-04T07:04:14.870" LastActivityDate="2016-10-04T07:04:14.870" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8486" PostTypeId="2" ParentId="7539" CreationDate="2016-10-04T08:00:05.963" Score="2" Body="&lt;p&gt;After much research, this appears to be bugged. I tested multiple regions and thoroughly switched my entire system formatting to the UK (locale, keyboard, timezone). I clicked all the buttons, entered all the admin prompts, logged out and rebooted to test system changes, and still couldn't get the indicator to display in dmy format (&quot;10 Sep&quot;). (I had the same issue with the &lt;a href=&quot;/questions/tagged/greeter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;greeter&amp;#39;&quot; rel=&quot;tag&quot;&gt;greeter&lt;/a&gt; too, for what it's worth.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The desired setting for this is certainly &lt;code&gt;Settings &amp;gt; Language &amp;amp; Region&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&quot;Language&quot; appears to successfully set the system language (and thus have the date in dmy in other languages that use that style)&lt;/li&gt;&#xA;&lt;li&gt;If &quot;Region&quot; has an effect, it is not readily apparent, and&lt;/li&gt;&#xA;&lt;li&gt;&quot;Formats&quot; visibly changes a date format shown grayed out on the screen. It would follow that changing the format from United States (mdy) to United Kingdom (dmy) that the menu indicator/greeter would change to match the change in the grayed out formatting (see image))&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sikms.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sikms.png&quot; alt=&quot;Language &amp;amp; Region&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But alas, it does not work as intended. I filed these bugs:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-datetime/+bug/1630151&quot; rel=&quot;nofollow noreferrer&quot;&gt;Indicator's displayed date/time does not respect formatting set in Switchboard Locale Plug (Language &amp;amp; Region)&lt;/a&gt;&lt;/strong&gt; (Related: &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-datetime/+bug/1048873&quot; rel=&quot;nofollow noreferrer&quot;&gt;Use same time format for greeter and indicator&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-locale/+bug/1630148&quot; rel=&quot;nofollow noreferrer&quot;&gt;No feedback after clicking &quot;Set System Language&quot;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Please subscribe to the bug reports so that the devs can ask for help testing solutions. If you want to give the open source devs some extra incentive, try putting &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow noreferrer&quot;&gt;a developer bounty&lt;/a&gt; on the task. I'll report back when the bug is cleared.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-04T08:09:20.760" LastActivityDate="2016-10-04T08:09:20.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8487" PostTypeId="2" ParentId="4993" CreationDate="2016-10-04T09:55:22.480" Score="2" Body="&lt;p&gt;A dedicated chat app &lt;a href=&quot;https://soundcloud.com/simply-elementary/episode-18-flappy-snap-pack#t=20:13&quot; rel=&quot;nofollow&quot;&gt;was recently discussed&lt;/a&gt; as a prominent wishlist request, but there isn't any such app in full development beyond prototypes as of now. The chat project &lt;a href=&quot;https://bugs.launchpad.net/gala/+bug/1324996&quot; rel=&quot;nofollow&quot;&gt;has an open bounty&lt;/a&gt; of $550 even though it was closed in May, which brings us to the feature request's closure:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I'm going to close this issue because the circumstances of the world have changed. It's no longer desirable to build a messenger app in this way.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is also the open question of which instant messaging protocol(s) such a dedicated &quot;chat&quot; app would use (usually XMPP is too small a feature set). As mentioned in the podcast, many protocols have closed their developer interfaces. They either provide their own app experience or are uninterested in developers creating their own, and there are so many competing protocols that users tend to follow the precedent of those in their social circle. &lt;a href=&quot;https://wiki.gnome.org/action/show/Apps/Empathy?action=show&amp;amp;redirect=Empathy&quot; rel=&quot;nofollow&quot;&gt;&lt;code&gt;Empathy&lt;/code&gt;&lt;/a&gt; is likely as close as we're getting for now.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-04T09:55:22.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8488" PostTypeId="2" ParentId="8380" CreationDate="2016-10-04T12:24:00.750" Score="2" Body="&lt;p&gt;Seems like the issue was hardware after all. After tweaking with the monitor settings and with color presets I managed to mostly resolve the issue.&lt;/p&gt;&#xA;" OwnerUserId="6697" LastActivityDate="2016-10-04T12:24:00.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8489" PostTypeId="1" AcceptedAnswerId="9200" CreationDate="2016-10-04T12:40:33.270" Score="3" ViewCount="3805" Body="&lt;p&gt;I have bad video performance in Loki. After some googling I found this hint: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7688/cannot-install-intel-proprietary-graphics-driver&quot;&gt;Cannot Install Intel Proprietary Graphics Driver&lt;/a&gt; and with some dirty trick (I put the Ubuntu 16.04 data in /etc/lsb-release file) installed the latest Intel video drivers.&lt;br&gt;&#xA;Unfortunately after doing all this I see no change in performance.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hints?&lt;/p&gt;&#xA;" OwnerUserId="575" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-11T21:47:00.440" Title="Intel graphics performance on Loki" Tags="|graphic-drivers|intel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8490" PostTypeId="2" ParentId="8024" CreationDate="2016-10-04T14:29:20.493" Score="1" Body="&lt;p&gt;I had the same issue. I replaced the window and resized it first vertically, which really goes slow. (only some pixels a second) When the window had the correct width again, I could resize it easily to the normal height.&lt;/p&gt;&#xA;" OwnerUserId="5045" LastActivityDate="2016-10-04T14:29:20.493" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8492" PostTypeId="1" AcceptedAnswerId="8822" CreationDate="2016-10-04T16:45:24.000" Score="4" ViewCount="2592" Body="&lt;p&gt;Just tried installing this on my laptop, completely new to Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to find out from other answers that the issue is that there is no native support for my network card, and that I need to download a new kernel. Problem is I don't have internet to download it with:&#xA;Intel 8260 drivers not working, no ethernet and cant bluetooth tether for updated kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no ethernet port and I could not get the network from my phone to my computer. I could connect the phone and the computer successfully, but there is still no internet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anybody knows a workaround to either problem, I would be grateful!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: This appears to be a problem with several units of Xiaomi Mibook Air laptop.&lt;/p&gt;&#xA;" OwnerUserId="6773" LastEditorUserId="7430" LastEditDate="2016-11-21T21:18:05.287" LastActivityDate="2016-11-21T21:18:05.287" Title="Xiomi Mi Book: Wifi not working" Tags="|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8494" PostTypeId="1" CreationDate="2016-10-04T17:05:05.860" Score="8" ViewCount="854" Body="&lt;p&gt;As a developer I want to use the Netbeans IDE Shortcuts in elementar OS 0.4. But I can not deactivate XWindow shortcuts that conflict with Netbeans' shortcut. Example: &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not listed in &lt;code&gt;Settings - Keyboard - Shortcuts - Windows&lt;/code&gt;...&lt;/p&gt;&#xA;" OwnerUserId="6774" LastEditorUserId="5565" LastEditDate="2016-10-04T17:33:07.527" LastActivityDate="2016-10-07T13:13:50.643" Title="Can not deactivate Alt+F7 XWindows shortcut (conflict with Netbeans)" Tags="|keyboard-shortcuts|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8495" PostTypeId="2" ParentId="4234" CreationDate="2016-10-04T17:21:08.647" Score="1" Body="&lt;p&gt;The original poster's temporary fix was to restart &lt;code&gt;lightdm&lt;/code&gt; via the command line, which would be:  &lt;br&gt;&lt;strong&gt;&lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/strong&gt; OR &lt;strong&gt;&lt;code&gt;sudo systemctl restart lightdm&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try &lt;a href=&quot;https://askubuntu.com/q/365719/49899&quot;&gt;reconfiguring lightdm&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-10-04T17:21:08.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8496" PostTypeId="2" ParentId="8494" CreationDate="2016-10-04T17:32:23.597" Score="10" Body="&lt;p&gt;Let's do it from &lt;code&gt;gsettings&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;gsettings list-recursively | grep \&amp;lt;Alt\&amp;gt;F7&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This finds all actions set to that keybinding. For instance, mine:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.mutter.wayland.keybindings switch-to-session-7 ['&amp;lt;Primary&amp;gt;&amp;lt;Alt&amp;gt;F7']&#xA;org.gnome.desktop.wm.keybindings begin-move ['&amp;lt;Alt&amp;gt;F7']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Set any conflicts to blank ('') or another keybinding. For example,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings begin-move &quot;['']&quot;&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Voilà! And if you ever want to restore the default, use this format:&lt;br&gt;&#xA;&lt;strong&gt;&lt;code&gt;gsettings reset org.gnome.desktop.wm.keybindings begin-move&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-07T13:13:50.643" LastActivityDate="2016-10-07T13:13:50.643" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8499" PostTypeId="1" AcceptedAnswerId="8515" CreationDate="2016-10-04T19:48:53.550" Score="1" ViewCount="661" Body="&lt;p&gt;I wanted to have a more smooth cursor movement while using touchpad, much like Windows (8.1 for that matter). Now it's very wobbly - when I put a finger on the touchpad, the cursor shakes randomly within a few pixel range, so I can't, for example, click precisely where I want. I've read somewhere that mousetweaks might resolve this, but I have no idea if it even works on elementary - and if it does, I can't seem to figure out how. I believe it worked somehow like this - it takes movements from a ~30ms (?) timespan, and inputs an average of these. I don't know if I can do it manually. Does anyone know anything about it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Touchpad is standard SynPS/2 Synaptics TouchPad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: system info, per &lt;code&gt;inxi -b&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;System:&lt;/strong&gt;&lt;br&gt;&#xA;  &lt;strong&gt;Kernel:&lt;/strong&gt; 4.4.0-38-generic x86_64 (64 bit) &lt;strong&gt;Desktop:&lt;/strong&gt; Gnome &lt;strong&gt;Distro:&lt;/strong&gt; elementary 0.4 loki&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;Machine:&lt;/strong&gt;&lt;br&gt;&#xA;  &lt;strong&gt;System:&lt;/strong&gt; SAMSUNG &lt;strong&gt;product:&lt;/strong&gt; 350V5C/351V5C/3540VC/3440VC &lt;strong&gt;v:&lt;/strong&gt; P09ABE.012.&lt;br&gt;&#xA;  &lt;strong&gt;Mobo:&lt;/strong&gt; SAMSUNG &lt;strong&gt;model:&lt;/strong&gt; NP350V5C-S08PL &lt;strong&gt;v:&lt;/strong&gt; BOARD 00 &lt;strong&gt;Bios:&lt;/strong&gt; American Megatrends &lt;strong&gt;v:&lt;/strong&gt; P09ABE &lt;strong&gt;date:&lt;/strong&gt; 07/04/2013&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;CPU:&lt;/strong&gt;&lt;br&gt;&#xA;  &lt;strong&gt;Dual core&lt;/strong&gt; Intel Core i5-3210M (-HT-MCP-) &lt;strong&gt;speed/max:&lt;/strong&gt; 1466/3100 MHz&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;Graphics&lt;/strong&gt;:&lt;br&gt;&#xA;  &lt;strong&gt;Card-1:&lt;/strong&gt; Intel 3rd Gen Core processor Graphics Controller&lt;br&gt;&#xA;  &lt;strong&gt;Card-2:&lt;/strong&gt; Advanced Micro Devices [AMD/ATI] Thames [Radeon HD 7500M/7600M Series]&lt;br&gt;&#xA;  &lt;strong&gt;Display Server:&lt;/strong&gt; X.Org 1.18.3 &lt;strong&gt;drivers:&lt;/strong&gt; ati,radeon,intel (unloaded: fbdev,vesa)&lt;br&gt;&#xA;  &lt;strong&gt;Resolution:&lt;/strong&gt; 1366x768@60.06hz&lt;br&gt;&#xA;  &lt;strong&gt;GLX Renderer:&lt;/strong&gt; Mesa DRI Intel Ivybridge Mobile GLX &lt;strong&gt;Version:&lt;/strong&gt; 3.0 Mesa 11.2.0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="6777" LastEditorUserId="6777" LastEditDate="2016-10-04T21:54:26.967" LastActivityDate="2016-10-05T13:27:25.003" Title="Smooth cursor movement on touchpad (Loki 0.4)" Tags="|touchpad|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8500" PostTypeId="2" ParentId="8492" CreationDate="2016-10-04T21:38:57.010" Score="1" Body="&lt;p&gt;Download in your phone:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-8000-ucode-25.30.13.0.tgz&quot; rel=&quot;nofollow&quot;&gt;https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-8000-ucode-25.30.13.0.tgz&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy it to your home folder  (you said your phone was conected otherwise try using bluetooth)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Extract it to your home folder:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;tar -zxvf iwlwifi-8000-ucode-25.30.13.0.tgz&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cp iwlwifi-*.ucode /lib/firmware&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution came from:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=209496&quot; rel=&quot;nofollow&quot;&gt;https://forums.linuxmint.com/viewtopic.php?t=209496&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I've done is figure out how you can get the file using your phone and make it available in your computer. Have in mind this answer was aimed for Linux Mint. Solution not tried by me. I hope it works.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-10-04T21:50:51.480" LastActivityDate="2016-10-04T21:50:51.480" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8501" PostTypeId="1" AcceptedAnswerId="8572" CreationDate="2016-10-04T22:50:21.663" Score="1" ViewCount="3837" Body="&lt;p&gt;My Intel Core i3 computer gets slow sometimes, since I installed Loki.  I'm quite a fan of Elementary OS and loved the way my laptop's performance improved with Luna and even better with Freya, but with Loki I have a series of lags that I don't know how to solve or replicate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Considering it has 4Gb of RAM, and it is a standalone PC (no Virtual Host), I'm unable to say what is causing these lags.  The only thing I can tell is that it happens sometimes during Internet Browsing (Firefox, Chrome, even Empathy), and most of the time waking up from sleep mode if I'm gone for a few minutes.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, noticing that I can watch movies there with VLC, even with HD videos through HDMI, I don't think it's an issue related with the amount of RAM or video drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, what I really want to know is &lt;strong&gt;what are the tools or steps needed to be followed, so I can narrow the possible causes?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm relatively a noob, so your help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="6474" LastActivityDate="2016-10-07T14:25:14.627" Title="How can I tell what is making Elementary Loki slow in my laptop (Intel Core i3, 4Gb RAM)" Tags="|release-loki|performance|monitoring|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8502" PostTypeId="1" CreationDate="2016-10-05T00:32:24.933" Score="1" ViewCount="484" Body="&lt;p&gt;I just installed Loki on my desktop,&#xA;ASUS Z87-PRO, BIOS:2103&#xA;32GB DDR3 (1866MHz)&#xA;i7-4790K&#xA;R9 380 (primary)&#xA;GTX 970 (secondary)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried installing from USB and DVD, straight install and from the liveCD mode.&#xA;It seems as though Grub is not installed by the installer. At boot all I getting is a flashing terminal courser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my laptop the install works fine just not my desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please advise &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following on I remembered I had downloaded the beta early last month and decided to try installing that. For some reason the beta works but the stable version does not. I guess I just have to hope that updating the beta brings me up to the stable &lt;/p&gt;&#xA;" OwnerUserId="6779" LastEditorUserId="6781" LastEditDate="2016-10-05T17:16:35.653" LastActivityDate="2019-10-23T06:02:10.313" Title="Loki 0.4 does not boot after install" Tags="|release-loki|system-installation|64-bit|" AnswerCount="1" CommentCount="1" ClosedDate="2019-10-23T16:02:02.813" ContentLicense="CC BY-SA 3.0" />
  <row Id="8503" PostTypeId="1" CreationDate="2016-10-05T00:52:39.610" Score="4" ViewCount="418" Body="&lt;p&gt;After installing elementary OS Loki on my laptop (Lenovo Flex 3), when I press towards the middle of the click bar on my touchpad, it will copy or paste depending on the location.  I've gone into Mouse &amp;amp; Touchpad settings and changing the physical click setting can disable copy and paste but also takes away my ability to &quot;right click&quot; with the right side of the click bar.  I want to be able to right click using my touchpad but this copy and paste has to go.  Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="6780" LastEditorUserId="308" LastEditDate="2019-12-19T20:19:42.720" LastActivityDate="2019-12-19T20:21:47.893" Title="How do I remove copy/paste touchpad controls from elementary OS Loki?" Tags="|release-loki|touchpad|mouse|laptop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="8504" PostTypeId="1" CreationDate="2016-10-05T02:24:58.083" Score="0" ViewCount="1182" Body="&lt;p&gt;I am using a TV as an external monitor, but the screen does not fit properly. Only the top half of the apps on the bottom dock are visible, and none of the top menus on the desktop are showing. On Windows 10, there is an option to &quot;Fit to Screen&quot; which resolves these display issues. Is there anything in Elementary OS that is similar?&lt;/p&gt;&#xA;" OwnerUserId="6782" LastActivityDate="2021-09-03T17:33:27.147" Title="&quot;Fit to screen&quot; For External monitor" Tags="|display|resolution|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8505" PostTypeId="2" ParentId="7995" CreationDate="2016-10-05T07:07:27.473" Score="1" Body="&lt;p&gt;This may help: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/301897/amd-gpu-pro-on-loki-ubuntu-16-04-kernel-4-4/308584&quot;&gt;https://unix.stackexchange.com/questions/301897/amd-gpu-pro-on-loki-ubuntu-16-04-kernel-4-4/308584&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do believe that your card is supported by the new AMD driver, however it's not preinstalled on Loki, you will need to follow the instructions posted by others on the link to get it working.&lt;/p&gt;&#xA;" OwnerUserId="6786" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-10-05T07:07:27.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8507" PostTypeId="1" CreationDate="2016-10-05T09:37:47.300" Score="0" ViewCount="1319" Body="&lt;p&gt;I've installed eOS loki on a USB via unetbootin.  Loki is just awesome BTW (aside from some bugs)!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run it on my Toshiba Portege the webcam works fine, but when I run it on my Macbook Air, Camera says no compatible device found...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how to troubleshoot this one?  &lt;code&gt;/dev/video0&lt;/code&gt; doesn't exist but when I run &lt;code&gt;lsmod&lt;/code&gt; &quot;video&quot; is listed as &quot;1&quot; ie it should be active...&lt;/p&gt;&#xA;" OwnerUserId="6694" LastActivityDate="2016-10-09T05:54:22.037" Title="Macbook Air webcam not working" Tags="|release-loki|macbook|macintosh|webcam|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8510" PostTypeId="1" CreationDate="2016-10-05T11:22:21.987" Score="1" ViewCount="72" Body="&lt;p&gt;When I make changes to an image, I still see the old thumbnail of the old image in Files. Is there a way to refresh a single thumbnail without deleting thumbnail cash? Sometimes the thumbnail refreshes automatically, other times F5 works, but not all the time. Or it refreshes if I rename the file, but that's expected anyway. In Ubuntu I was using a script for Nautilus.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-10-05T11:22:21.987" Title="How to refresh a single thumbnail in Files (Loki) without deleting the thumbnail cash?" Tags="|release-loki|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8511" PostTypeId="1" CreationDate="2016-10-05T11:23:42.787" Score="2" ViewCount="1504" Body="&lt;p&gt;The stable up-to-date version of Epiphany browser at the moment of this post is 3.18.5. As I have some &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8509/170&quot;&gt;problem with bookmarks in it&lt;/a&gt; I was wandering whether some &lt;a href=&quot;https://launchpad.net/ubuntu/+source/epiphany-browser/3.22.0-1ubuntu2&quot; rel=&quot;nofollow noreferrer&quot;&gt;later version&lt;/a&gt; could be used in Loki... &lt;a href=&quot;http://www.ubuntuupdates.org/package/core/xenial/universe/base/epiphany-browser&quot; rel=&quot;nofollow noreferrer&quot;&gt;or not...&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-23T15:43:12.060" Title="How to upgrade to latest version of Epiphany/Web browser?" Tags="|release-loki|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8513" PostTypeId="1" CreationDate="2016-10-05T12:58:23.573" Score="2" ViewCount="464" Body="&lt;p&gt;I'm trying to connect Calendar to caldav.one.com. I've setup everything up as per the instructions from one.com. Still when I enter my Username and Password and click OK I get back to the same window asking for my Username and Password. I'm using caldav.one.com on my phone and it works just fine. Any ideas what is going wrong in Calendar? &lt;/p&gt;&#xA;" OwnerUserId="637" LastActivityDate="2016-10-05T12:58:23.573" Title="Connect Calendar to CalDAV server" Tags="|release-loki|calendar|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8515" PostTypeId="2" ParentId="8499" CreationDate="2016-10-05T13:27:25.003" Score="2" Body="&lt;p&gt;Okay so I did some things I'm not entirely sure about, but I think &lt;code&gt;sudo apt remove xserver-xorg-input-libinput&lt;/code&gt; did what I wanted. I also did &lt;code&gt;sudo apt install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&lt;/code&gt; but I don't remember if I hadn't had that installed in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7939/way-to-enable-vertical-two-finger-scrolling-but-not-horizontal/8088&quot;&gt;Thanks to Jason Gambrel, btw.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6777" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-05T13:27:25.003" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8517" PostTypeId="2" ParentId="5033" CreationDate="2016-10-05T14:57:02.953" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo service network-manager restart&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This will restart the network service and everything will be resumed&lt;/p&gt;&#xA;" OwnerUserId="5946" LastActivityDate="2016-10-05T14:57:02.953" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8519" PostTypeId="5" CreationDate="2016-10-05T16:50:57.347" Score="0" Body="&lt;p&gt;Shortcuts link users to apps and files in different directories. Shortcuts such as those in the Applications menu (&lt;a href=&quot;/questions/tagged/slingshot&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;slingshot&amp;#39;&quot; rel=&quot;tag&quot;&gt;slingshot&lt;/a&gt;) conveniently collect links to all applications in one place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more, see &lt;a href=&quot;https://en.wikipedia.org/wiki/File_shortcut&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-05T17:16:39.377" LastActivityDate="2016-10-05T17:16:39.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8520" PostTypeId="4" CreationDate="2016-10-05T16:50:57.347" Score="0" Body="Shortcuts link users to apps and files in different directories. Shortcuts such as those in the Applications menu (&quot;Slingshot&quot;) conveniently collect links to all applications in one place." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-05T17:16:26.967" LastActivityDate="2016-10-05T17:16:26.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8521" PostTypeId="2" ParentId="8103" CreationDate="2016-10-05T20:07:58.420" Score="1" Body="&lt;p&gt;I used Unetbootin with reasonable success, however I did have to edit syslinux.cfg to include &quot;persistent&quot; in the startup line.&lt;/p&gt;&#xA;" OwnerUserId="6694" LastActivityDate="2016-10-05T20:07:58.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8522" PostTypeId="5" CreationDate="2016-10-05T20:39:31.530" Score="0" Body="&lt;p&gt;Video editors let users arrange multimedia clips to compose segments of video.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:35.123" LastActivityDate="2016-10-06T13:19:35.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8523" PostTypeId="4" CreationDate="2016-10-05T20:39:31.530" Score="0" Body="Applications for editing videos on elementary OS" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:29.673" LastActivityDate="2016-10-06T13:20:29.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8524" PostTypeId="5" CreationDate="2016-10-05T20:46:45.750" Score="0" Body="&lt;p&gt;Video players are applications that let users view video media. The default video player on elementary OS is &lt;a href=&quot;/questions/tagged/audience&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;audience&amp;#39;&quot; rel=&quot;tag&quot;&gt;audience&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:01.003" LastActivityDate="2016-10-06T13:20:01.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8525" PostTypeId="4" CreationDate="2016-10-05T20:46:45.750" Score="0" Body="Applications that play videos on elementary OS. The OS's default video player is &quot;Audience&quot;—use that tag for questions specific to that application." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:43.350" LastActivityDate="2016-10-06T13:19:43.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8526" PostTypeId="5" CreationDate="2016-10-05T20:52:45.177" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-05T20:52:45.177" LastActivityDate="2016-10-05T20:52:45.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8527" PostTypeId="4" CreationDate="2016-10-05T20:52:45.177" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-05T20:52:45.177" LastActivityDate="2016-10-05T20:52:45.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8528" PostTypeId="2" ParentId="8507" CreationDate="2016-10-05T20:59:19.883" Score="1" Body="&lt;p&gt;&lt;code&gt;bcwc_pcie&lt;/code&gt; is an experimental &quot;Linux driver for the Facetime HD (Broadcom 1570) PCIe webcam found in recent Macbooks&quot;. Install directions &lt;a href=&quot;https://github.com/patjak/bcwc_pcie/wiki&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;!&lt;/p&gt;&#xA;" OwnerUserId="6694" LastEditorUserId="5565" LastEditDate="2016-10-09T05:54:22.037" LastActivityDate="2016-10-09T05:54:22.037" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8529" PostTypeId="5" CreationDate="2016-10-05T21:08:46.763" Score="0" Body="&lt;p&gt;Permissions limit the users and groups that can access, write, and execute a file.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Related: &lt;a href=&quot;http://www.howtogeek.com/67987/htg-explains-how-do-linux-file-permissions-work/&quot; rel=&quot;nofollow&quot;&gt;How Do Linux File Permissions Work?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:40.390" LastActivityDate="2016-10-06T13:20:40.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8530" PostTypeId="4" CreationDate="2016-10-05T21:08:46.763" Score="0" Body="Permissions limit the users and groups that can access, write, and execute a file." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:08.147" LastActivityDate="2016-10-06T13:20:08.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8531" PostTypeId="2" ParentId="3573" CreationDate="2016-10-05T21:14:54.713" Score="2" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;With the 2016 Loki release, &lt;strong&gt;only 64-bit (&lt;code&gt;amd64&lt;/code&gt;) processors are supported&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Earlier releases had &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8266/5565&quot;&gt;supported 32-bit (&lt;code&gt;i386&lt;/code&gt;) processors&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/1437/5565&quot;&gt;ARM processors are currently unsupported.&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For more on elementary OS's current compatibility and system requirements, see the links &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8266/5565&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-05T21:14:54.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8532" PostTypeId="1" CreationDate="2016-10-06T02:06:36.037" Score="0" ViewCount="1537" Body="&lt;p&gt;Why does eOS come with the firewall turned off by default?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does turning it on do anything?&lt;/p&gt;&#xA;" OwnerUserId="5278" LastActivityDate="2016-10-06T08:24:48.867" Title="Why is the firewall off by default?" Tags="|firewall|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-09T00:26:17.797" ContentLicense="CC BY-SA 3.0" />
  <row Id="8533" PostTypeId="5" CreationDate="2016-10-06T02:10:07.593" Score="0" Body="&lt;p&gt;As of elementary OS's 2016 Loki release, Epiphany is the operating system's default web browser. Prior elementary OS releases used &lt;a href=&quot;/questions/tagged/midori&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;midori&amp;#39;&quot; rel=&quot;tag&quot;&gt;midori&lt;/a&gt;. In other operating systems, the browser is known as &quot;Web&quot;, following a 2012 change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Web_(web_browser)&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:35.070" LastActivityDate="2016-10-06T13:20:35.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8534" PostTypeId="4" CreationDate="2016-10-06T02:10:07.593" Score="0" Body="Epiphany is the default web browser in elementary OS as of the Loki release. For the default browser in Freya and earlier, use &quot;Midori&quot;. For other web browsers, use other tags." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:40.383" LastActivityDate="2016-10-06T13:19:40.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8535" PostTypeId="5" CreationDate="2016-10-06T02:23:11.613" Score="0" Body="&lt;p&gt;While elementary OS was first released in 2011, its predecessor (an icon set) dates back to 2009. For more information, see &lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS&quot; rel=&quot;nofollow&quot;&gt;its Wikipedia page&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:49.143" LastActivityDate="2016-10-06T13:19:49.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8536" PostTypeId="4" CreationDate="2016-10-06T02:23:11.613" Score="0" Body="For questions about the elementary development team and its history, philosophy, and culture." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:54.857" LastActivityDate="2016-10-06T13:19:54.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8537" PostTypeId="2" ParentId="5402" CreationDate="2016-10-06T04:25:47.763" Score="2" Body="&lt;p&gt;The menu bar (&lt;code&gt;wingpanel&lt;/code&gt;) at the top of the screen is for extended information at a glance and quick access to extended functions. If you are just looking to launch or hide Google Chrome, the dock (&lt;code&gt;plank&lt;/code&gt;) at the bottom of the screen is specifically designed for that.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-06T04:25:47.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8538" PostTypeId="5" CreationDate="2016-10-06T04:30:38.047" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://en.wikipedia.org/wiki/Context_menu&quot; rel=&quot;nofollow&quot;&gt;Context menus&lt;/a&gt; provide contextual information and extended options for the item under the mouse cursor. These menus are usually accessed by mouse right-click or ctrl+click.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:20:32.603" LastActivityDate="2016-10-06T13:20:32.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8539" PostTypeId="4" CreationDate="2016-10-06T04:30:38.047" Score="0" Body="Usually accessed via mouse right-click, these drop-down menus show users extended options for the clicked content" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:57.240" LastActivityDate="2016-10-06T13:19:57.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8540" PostTypeId="5" CreationDate="2016-10-06T04:39:49.710" Score="0" Body="&lt;p&gt;Internationalization is the process of making software compatible with a region's culture through translation to its language and adaption to its customs. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more, see &lt;a href=&quot;https://en.wikipedia.org/wiki/Internationalization_and_localization&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:45.723" LastActivityDate="2016-10-06T13:19:45.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8541" PostTypeId="4" CreationDate="2016-10-06T04:39:49.710" Score="0" Body="The effort to make software match a region's culture, mainly through translation to its language but also through adaption to its customs" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-06T13:19:51.833" LastActivityDate="2016-10-06T13:19:51.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8543" PostTypeId="2" ParentId="8532" CreationDate="2016-10-06T08:24:48.867" Score="1" Body="&lt;p&gt;Probably because it's also off by default in Ubuntu and it's the same thing (ufw). &lt;br/&gt;&#xA;More answers here:&lt;br/&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/questions/22667/why-is-the-firewall-disabled-by-default&quot;&gt;https://askubuntu.com/questions/22667/why-is-the-firewall-disabled-by-default&lt;/a&gt;&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/DoINeedAFirewall&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/DoINeedAFirewall&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-06T08:24:48.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8544" PostTypeId="1" CreationDate="2016-10-06T10:03:37.363" Score="8" ViewCount="1123" Body="&lt;p&gt;How do I enable touchscreen support on my Lenovo Yoga 3? The screen rotation works perfectly, but touch/scrolling/multitouch do not.&lt;/p&gt;&#xA;" OwnerUserId="6801" LastEditorDisplayName="user212" LastEditDate="2016-10-11T08:31:07.983" LastActivityDate="2018-05-22T12:32:18.143" Title="Loki 0.4.0 touchscreen support" Tags="|release-loki|input|touchscreen|lenovo|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8547" PostTypeId="2" ParentId="5593" CreationDate="2016-10-06T16:12:44.903" Score="3" Body="&lt;p&gt;If you enabled the desktop icons by Nautilus (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3856/how-to-enable-desktop-icons-and-right-click-in-elementary-os-freya&quot;&gt;How to enable desktop icons and right click in Elementary OS Freya?&lt;/a&gt;), you can do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;cd ~/.config/gtk-3.0&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;nano gtk.css&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;add the css: &lt;code&gt;.nautilus-desktop.nautilus-canvas-item {color: #ffffff;text-shadow: 1 1 alpha (@fg_color, 0.8);}&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;restart session&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Change the color as you want.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-06T17:51:34.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8549" PostTypeId="2" ParentId="8024" CreationDate="2016-10-06T18:17:53.300" Score="6" Body="&lt;p&gt;To fix this issue you need to &lt;strong&gt;kill/close&lt;/strong&gt; pantheon-mail and then run the command&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;dconf reset -f /org/pantheon/mail/&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I believe this is only a temporary solution. If you have Elementary Tweaks installed you can add that command to &lt;strong&gt;Cerbere&lt;/strong&gt; so is constantly running in the back. &lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-10-06T18:17:53.300" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8550" PostTypeId="2" ParentId="7743" CreationDate="2016-10-06T19:54:03.590" Score="0" Body="&lt;p&gt;Possibly the 2.3 client is working around this by not updating the menu so often.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/owncloud/client/issues/5171&quot; rel=&quot;nofollow&quot;&gt;https://github.com/owncloud/client/issues/5171&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6808" LastActivityDate="2016-10-06T19:54:03.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8552" PostTypeId="5" CreationDate="2016-10-06T20:29:26.143" Score="0" Body="&lt;p&gt;The Microsoft Surface tablet was first released in 2012. They are designed to work with Windows and known for their 2-in-1 detachable accessories (such as a keyboard) and kickstands, which prop up the display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more, see &lt;a href=&quot;https://en.wikipedia.org/wiki/Microsoft_Surface&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:24.700" LastActivityDate="2016-10-09T00:08:24.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8553" PostTypeId="4" CreationDate="2016-10-06T20:29:26.143" Score="0" Body="For questions about using elementary OS on Microsoft Surface tablet computers" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:27.393" LastActivityDate="2016-10-09T00:08:27.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8554" PostTypeId="5" CreationDate="2016-10-06T20:38:48.677" Score="0" Body="&lt;p&gt;Tablet computers, like larger versions of touchscreen smartphones, are thin, portable computers with their components hidden behind the screen. They have reached mainstream popularity with Apple's 2010 release of the iPad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more background, see &lt;a href=&quot;https://en.wikipedia.org/wiki/Tablet_computer&quot; rel=&quot;nofollow&quot;&gt;Wikipedia&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:15.533" LastActivityDate="2016-10-09T00:08:15.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8555" PostTypeId="4" CreationDate="2016-10-06T20:38:48.677" Score="0" Body="For questions about using elementary OS on thin, portable, touchscreen computers." OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:12.923" LastActivityDate="2016-10-09T00:08:12.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8556" PostTypeId="1" CreationDate="2016-10-06T20:54:25.383" Score="0" ViewCount="201" Body="&lt;p&gt;So the thing is that I was running a live elementary USB and wanted to use GParted to do some partitioning on my other USB but Gparted interrupted me constantly with the error that GPT table was missing (which I completely didn't know) and so I did as Gparted directed me and created a fake msdos table in my primary hard drive but after that on the next reboot the PC stopped working and directly started booting from the Realtek Network Agent via ipv4 and ipv6 (pics enclosed)  which should only be possible if there is a technical default with the hard drive or a windows failure. On failing to do so it redirected me to a new window that read &quot; Default Boot Device Missing Or Boot Failed etc etc&quot; (pic enclosed) The hard drive was fine (I opened up the laptop and checked that its completely fine) so I tried to reinstall my windows BUT THE REAL PROBLEM BEGING NOW!! My BIOS wont allow me to boot anymore from the disk drives. So I thought why not USB boot linux by the time but then the biggest shock came as I realised my BIOS wont let me boot from any external media and so I cant carry out any repair work. Any idea what went wrong?? Is my BIOS corrupted?? Also do tell me how to replace my BIOS as I am quite fed up with this one. Thanks is Advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My specifications:--&#xA;Laptop name- Lenovo Z50-70 &#xA;Processor-Intel Core i5&#xA;Memory- 8 GB&#xA;Storage- 1 TB&#xA;Bios version- 9BCN25WW&#xA;Primary OS - Windows 10&lt;/p&gt;&#xA;" OwnerUserId="6809" LastActivityDate="2016-10-07T11:28:56.963" Title="I maybe corrupted my BIOS" Tags="|boot|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8557" PostTypeId="5" CreationDate="2016-10-06T21:17:31.840" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-06T21:17:31.840" LastActivityDate="2016-10-06T21:17:31.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8558" PostTypeId="4" CreationDate="2016-10-06T21:17:31.840" Score="0" Body="Questions about the Java Development Kit (JDK) in relation to elementary OS" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:01.090" LastActivityDate="2016-10-09T00:08:01.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8559" PostTypeId="5" CreationDate="2016-10-06T21:20:16.087" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-06T21:20:16.087" LastActivityDate="2016-10-06T21:20:16.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8560" PostTypeId="4" CreationDate="2016-10-06T21:20:16.087" Score="0" Body="For questions about configuration files and customized settings in applications and other features throughout elementary OS" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-09T00:08:10.093" LastActivityDate="2016-10-09T00:08:10.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8562" PostTypeId="1" CreationDate="2016-10-07T02:10:13.187" Score="2" ViewCount="142" Body="&lt;p&gt;How to rotate photos in Photos app using shortcut keys?  I have found that &lt;kbd&gt;+&lt;/kbd&gt;  &lt;kbd&gt;-&lt;/kbd&gt;will zoom in and out the picture and &lt;kbd&gt;*&lt;/kbd&gt; will fit the image to the original size. And also I found that the rotating direction can be changed by clicking the rotate button on below left corner with pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;. But I need a shortcut key that can easily rotate the image by pressing one or two keys maximum. Please help. Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="3955" LastEditorUserId="4185" LastEditDate="2016-12-08T08:51:24.323" LastActivityDate="2016-12-08T08:51:24.323" Title="What is the shortcut key to rotate photos in Photos app" Tags="|release-loki|keyboard-shortcuts|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8563" PostTypeId="2" ParentId="4852" CreationDate="2016-10-07T02:18:26.523" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/switchboard/+bug/1033270&quot; rel=&quot;nofollow&quot;&gt;A previous report&lt;/a&gt; linked this error to a video card drivers issue. It would be helpful to add more details about your drivers to the original post. Next, I would try &lt;strong&gt;uninstalling and reinstalling your video card drivers&lt;/strong&gt;. If you can, avoid AMD's proprietary drivers.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-07T02:18:26.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8564" PostTypeId="2" ParentId="8149" CreationDate="2016-10-07T02:18:51.867" Score="0" Body="&lt;p&gt;To add, you can also contribute with money (the devs will definitely appreciate it):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;giving a small amount of money monthly via &lt;a href=&quot;https://www.patreon.com/elementary/&quot; rel=&quot;nofollow&quot;&gt;Patreon&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;placing bounties on open issues via &lt;a href=&quot;https://www.bountysource.com/teams/elementary&quot; rel=&quot;nofollow&quot;&gt;BountySource&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-10-07T02:18:51.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8565" PostTypeId="2" ParentId="3816" CreationDate="2016-10-07T03:04:08.863" Score="0" Body="&lt;p&gt;If the above suggestions did not answer your question to your satisfaction ... try using a mini distro JUST used for partitioning a disk ... maybe try using gParted Live (I have no affiliation with it).&#xA;I know this solution doesn't use Elementary ... but perhaps this will let you do what you want ... in case your question wasn't stated specific enough for us to offer another solution.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-10-07T03:04:08.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8566" PostTypeId="1" CreationDate="2016-10-07T06:49:47.843" Score="1" ViewCount="808" Body="&lt;p&gt;I installed elementary os Loki on my MacBook Pro which has Nvidia graphics card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;With a fresh installation I can change the brightness with the brightness keys from keyboard. But if I install the Nvidia drivers then the brightness is not changing even if I change it from the power settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the solution given in  &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7528/loki-mbpr-15-screen-brightness-doesnt-work&quot;&gt;Loki - MBPr 15 - Screen Brightness doesn&amp;#39;t work&lt;/a&gt; it does not works for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have MacBook Pro 13 Inch 2009 model.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note :&lt;/em&gt; &#xA;I tried updating the graphics driver to the latest one but all I got was a blank screen after reboot.&lt;/p&gt;&#xA;" OwnerUserId="5614" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-09T00:10:04.783" Title="Cannot change brightness with Nvidia drivers installed" Tags="|nvidia|brightness|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-09T00:14:58.117" ContentLicense="CC BY-SA 3.0" />
  <row Id="8567" PostTypeId="1" CreationDate="2016-10-07T09:51:02.893" Score="0" ViewCount="876" Body="&lt;p&gt;I just installed Loki a couple of days ago, and I'd just like to know when support for it ends. I assume that since its base is Ubuntu 16.04, security support ends in 2021. Is that correct? And what about regular software updates from the elementary team, until when will that be given? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, it's a pleasure working on elementary. :)&lt;/p&gt;&#xA;" OwnerUserId="6814" LastEditorUserId="5565" LastEditDate="2016-10-07T13:26:34.487" LastActivityDate="2016-10-07T13:32:35.347" Title="What is the end of life for Loki?" Tags="|release-loki|updates|elementary-project|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-09T00:15:46.763" ContentLicense="CC BY-SA 3.0" />
  <row Id="8568" PostTypeId="2" ParentId="3308" CreationDate="2016-10-07T11:20:36.973" Score="1" Body="&lt;p&gt;I just recently installed eOS Loki along side Win10. From the pictures that you posted, it looks like you originally installed Win7 and upgraded to 10. I think that might be where the name is coming from. &#xA;On the install options page for eOS just select something else and install on the 160 gb partition. &lt;/p&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-07T11:20:36.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8569" PostTypeId="2" ParentId="8556" CreationDate="2016-10-07T11:28:56.963" Score="1" Body="&lt;p&gt;On the side of the laptop there is a button next to the power button called a &quot;NOVO&quot; button. When the laptop is completely shut down, you can press that button and go straight into BIOS or UEFI depending on what type of motherboard your have installed. (They are basically the same with UEFI being the upgrade.)&lt;/p&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-07T11:28:56.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8570" PostTypeId="2" ParentId="6725" CreationDate="2016-10-07T11:45:44.120" Score="1" Body="&lt;p&gt;I looked up your laptop from the Dell website. The HDD is in fact a hybrid drive with a 32 gb ssd inside of the 500 gb mechanical drive. This is the reason that you need the Intel RST driver to work. There is a fix for Ubuntu, and as eOS is a derivative of Ubuntu, it should work. &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2146741&quot; rel=&quot;nofollow&quot;&gt;Ubuntu fix for Intel RST&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-07T11:45:44.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8571" PostTypeId="2" ParentId="8159" CreationDate="2016-10-07T11:53:21.517" Score="0" Body="&lt;p&gt;Install the Elementary Tweaks: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/4p3yei/elementary_tweaks_on_loki/&quot; rel=&quot;nofollow&quot;&gt;https://www.reddit.com/r/elementaryos/comments/4p3yei/elementary_tweaks_on_loki/&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you can easily change the system fonts.&lt;/p&gt;&#xA;" OwnerUserId="575" LastActivityDate="2016-10-07T11:53:21.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8572" PostTypeId="2" ParentId="8501" CreationDate="2016-10-07T12:04:19.573" Score="1" Body="&lt;p&gt;One terminal command you can use is called 'top'. The link is &lt;a href=&quot;http://linux.about.com/od/commands/fl/The-Linux-Top-Command.htm&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. I personally would use that and leave the terminal window open and just monitor it to see what process is causing the issue. This will at least give you an idea to where to start looking. &lt;/p&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-07T12:04:19.573" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8574" PostTypeId="2" ParentId="8376" CreationDate="2016-10-07T13:02:27.880" Score="3" Body="&lt;p&gt;Ok, after much effort, I finally got this to work.  Here's how:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -f install&#xA;&#xA;sudo dpkg --add-architecture i386&#xA;&#xA;sudo apt-get install libxt6:i386 libnspr4-0d:i386 libgtk2.0-0:i386 libstdc++6:i386 libnss3-1d:i386 libxml2:i386 libxslt1.1:i386 libcanberra-gtk-module:i386 gtk2-engines-murrine:i386 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: the above command is similar to other tutorials, but without &lt;code&gt;lib32nss-mdns:i386&lt;/code&gt; as it couldn't be found.  This was a huge PIA and a lot of googling to find the answer, so the replacement can be installed with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libnss-sss:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, as with other tutorials, create the symbolic links with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/lib/x86_64-linux-gnu/libgnome-keyring.so.0 /usr/lib/libgnome-keyring.so.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/lib/x86_64-linux-gnu/libgnome-keyring.so.0.2.0 /usr/lib/libgnome-keyring.so.0.2.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then finally, make the Adobe installer executable with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod a+x AdobeAIRInstaller.bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ./AdobeAIRInstaller.bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, it takes some time for the dialog to show after the above command, so give it a while.  But when finished, you should see Adobe Air in your applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then for completeness, delete the symbolic links with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/lib/libgnome-keyring.so.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/lib/libgnome-keyring.so.0.2.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So after all that, I tried to install Scratch 2.0 Offline (which was the whole point of the exercise) and it didn't work!  Then I changed the permissions of the .air file to full read write execute for both current user and sudo and voila, it worked!&lt;/p&gt;&#xA;" OwnerUserId="6694" LastEditorUserId="6694" LastEditDate="2016-10-17T11:29:25.640" LastActivityDate="2016-10-17T11:29:25.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8575" PostTypeId="2" ParentId="8567" CreationDate="2016-10-07T13:32:35.347" Score="0" Body="&lt;p&gt;The elementary team typically &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/22rhi3/how_long_is_luna_supported_for/&quot; rel=&quot;nofollow&quot;&gt;only supports the latest release&lt;/a&gt; with feature updates, which I think is mainly a volunteer issue than anything else. The team tends to not set firm release dates and follows a &quot;done when it's done&quot; mentality. So now that Loki is released, there isn't a set date for Freya's end-of-life, but Freya-specific issues will likely not garner much attention. You can track the progress on the next release, Juno, &lt;a href=&quot;https://launchpad.net/elementary/+milestone/juno-beta1&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. That will likely be as close as it gets to Loki's end-of-life.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OS is built atop Ubuntu &quot;Long Term Support&quot; releases, which also stop receiving feature support after about nine months but do receive major security fixes for five years (&lt;a href=&quot;https://en.wikipedia.org/wiki/Ubuntu_version_history#Table_of_versions&quot; rel=&quot;nofollow&quot;&gt;April 2021&lt;/a&gt;). The team pushes those security updates to former releases and will post in a public place if for some reason an older release cannot update (users would be expected to upgrade for security reasons at that time).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-07T13:32:35.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8576" PostTypeId="2" ParentId="8501" CreationDate="2016-10-07T14:25:14.627" Score="0" Body="&lt;p&gt;I'm experiencing exactly the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had wonderful performance with Luna and Freya. With Loki however I am disappointed with the interactivity problems I'm experiencing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example sometimes when I open a new browser tab the mouse will completely freeze for up to 15 seconds until the new page has finished rendering. Even if no other programs are open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an i5 with 4gb of RAM. I have over 2gb free at the moment, so it's not swapping.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps it's something with the newer kernel?&lt;/p&gt;&#xA;" OwnerUserId="6819" LastActivityDate="2016-10-07T14:25:14.627" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8578" PostTypeId="1" CreationDate="2016-10-07T20:52:59.907" Score="3" ViewCount="565" Body="&lt;p&gt;I am using ElementaryOS Loki and installed Tweaks also but unlike ElementaryOS Luna, I cannot increase the window shadow offset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to increase the window shadow offset in Loki ? &lt;/p&gt;&#xA;" OwnerUserId="6821" LastActivityDate="2016-11-28T18:03:28.463" Title="ElementaryOS Loki - window shadow offset" Tags="|tweak-tool|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8579" PostTypeId="1" CreationDate="2016-10-07T22:24:26.533" Score="0" ViewCount="994" Body="&lt;p&gt;guys. Honestly, I am kind of a new user to Linux and I have recently installed Linux Elementary OS 0.3.2 Freya (64-bit). Everything is perfectly working, aside copying or any transactions with files. Whenever I copy any file to any USB-Stick or Hard-Drive whatsoever, after having unplugged it is not there...seems I have never copied anything. It keeps happening. Sometimes data stay when I, after copying, rename the file. What do you think the problem is and How can it be fixed? Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="6823" LastActivityDate="2017-05-09T12:47:58.097" Title="Copied files are disappearing from USB stick" Tags="|hardware|usb-drive|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8580" PostTypeId="2" ParentId="8579" CreationDate="2016-10-08T01:40:51.937" Score="0" Body="&lt;p&gt;A possible solution is that the USB drive permissions are not set correctly.&#xA;The following terminal commands will tell you what the device assignment is and also to change the permissions within the device. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Terminal command to tell you the device assignment for the drive.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    sudo fdisk -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The device that is the size of your USB device will be assigned a location such as /dev/sda or /dev/sdb. Using the location info you can change the permissions easily with the following command depending on if you only want read and write permissions or also want to execute programs on the drive. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 777 /dev/sdX     &amp;lt;---For Read / Write / Execute &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 666 /dev/sdX     &amp;lt;---For Read / Write &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-08T01:40:51.937" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8581" PostTypeId="2" ParentId="8504" CreationDate="2016-10-08T05:59:10.857" Score="0" Body="&lt;p&gt;Have you tried setting the external monitor as the primary? You can do this by &quot;starring&quot; it in the Displays settings.&lt;/p&gt;&#xA;" OwnerUserId="6669" LastActivityDate="2016-10-08T05:59:10.857" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8582" PostTypeId="2" ParentId="8562" CreationDate="2016-10-08T09:39:17.357" Score="2" Body="&lt;p&gt;&lt;kbd&gt;[&lt;/kbd&gt; or &lt;kbd&gt;]&lt;/kbd&gt; but it only rotates the image right, so you need to press the key 3 times to rotate it to the left. &lt;kbd&gt;Alt Gr&lt;/kbd&gt; &lt;kbd&gt;9&lt;/kbd&gt; does the same thing. &lt;kbd&gt;Ctrl&lt;/kbd&gt; &lt;kbd&gt;[&lt;/kbd&gt; or &lt;kbd&gt;]&lt;/kbd&gt; also rotates the image to the right. &lt;kbd&gt;Ctrl&lt;/kbd&gt; &lt;kbd&gt;Shift&lt;/kbd&gt; &lt;kbd&gt;[&lt;/kbd&gt; or &lt;kbd&gt;]&lt;/kbd&gt; doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-10-08T09:39:17.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8583" PostTypeId="1" AcceptedAnswerId="8584" CreationDate="2016-10-08T10:37:25.027" Score="1" ViewCount="379" Body="&lt;p&gt;When I click the maximize button in the top right corner in Audience (the Videos Application) the header as well as the line with date and time and the indicators are still there. This seems kind of annoying when watching a longer video.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now, I solved the problem by defining a full screen shortcut for any window in the system settings but I was wondering whether there is a more smooth solution like a button?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for helping!&lt;/p&gt;&#xA;" OwnerUserId="6826" LastActivityDate="2016-10-08T11:04:11.847" Title="Is there a button in Audience (Videos Application) to switch to full screen?" Tags="|audience|video-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8584" PostTypeId="2" ParentId="8583" CreationDate="2016-10-08T11:04:11.847" Score="3" Body="&lt;p&gt;Just double click inside the video frame.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-10-08T11:04:11.847" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8585" PostTypeId="2" ParentId="3857" CreationDate="2016-10-08T11:56:28.317" Score="0" Body="&lt;p&gt;A quick search on this site pulled this answer up. The answer is for eOS Freya, but it shouldn't matter. Here is the link. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2813/i-forgot-my-password&quot;&gt;Unlock Password through Live boot&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="6804" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-08T11:56:28.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8586" PostTypeId="1" CreationDate="2016-10-08T12:12:03.337" Score="3" ViewCount="85" Body="&lt;p&gt;I'm using a university email account that's apparently  badly configured, Evolution keeps sending me errors whenever I do something, all about &quot;Unexpected server response&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm wondering, whether I can force-hide warnings based on unexpected server response? If not, just force-ignore all warnings/errors that Evolution sends? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Evolution was the only email/calendar solution for elementary OS I found after a long day that properly integrated google calendar delegates, so I'd rather not change email/calendar again.&lt;/p&gt;&#xA;" OwnerUserId="6820" LastEditorUserId="26" LastEditDate="2016-10-09T00:11:26.907" LastActivityDate="2018-02-03T13:45:03.393" Title="How can I hide errors in Evolution?" Tags="|settings|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8587" PostTypeId="1" CreationDate="2016-10-08T12:29:08.453" Score="2" ViewCount="1821" Body="&lt;p&gt;After installing Parallel tools, the mouse pointer is not visible but works if I click. Can I re-enable it via Terminal?&lt;/p&gt;&#xA;" OwnerUserId="6827" LastEditorUserId="5565" LastEditDate="2016-10-09T22:32:37.850" LastActivityDate="2016-11-11T10:55:59.687" Title="Mouse cursor invisible after installing Parallel Tools" Tags="|mouse|virtualization|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8592" PostTypeId="1" CreationDate="2016-10-08T16:13:16.583" Score="1" ViewCount="712" Body="&lt;p&gt;Today I tried to install elementary OS on my PC alongside Windows 10 but I've got error when I tried to launch bootable usb (see photo). How can I install it?&#xA;I want to try Linux for my first time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My PC specs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Processor: AMD A8-7650K 3.8GHz &lt;/li&gt;&#xA;&lt;li&gt;RAM: HyperX FURY DDR3-1866 2x4GB &lt;/li&gt;&#xA;&lt;li&gt;Motherboard: MSI A88XM-E35 V2 &lt;/li&gt;&#xA;&lt;li&gt;Graphics card: Asus GeForce GTX 950 STRIX 2GB  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o8rR4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o8rR4.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6830" LastEditorDisplayName="user212" LastEditDate="2016-10-11T08:31:02.247" LastActivityDate="2016-10-11T08:31:02.247" Title="Problem booting with NVidia graphics" Tags="|system-installation|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8594" PostTypeId="1" AcceptedAnswerId="8774" CreationDate="2016-10-08T17:20:05.047" Score="1" ViewCount="100" Body="&lt;p&gt;Any suggestions for video capture programs for creating podcasts?  I just need something simple and haven't had luck with VLC or Shotcut.  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-10-17T23:30:25.443" Title="Need a simple solution for video podcasting" Tags="|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8596" PostTypeId="2" ParentId="8566" CreationDate="2016-10-08T17:50:00.677" Score="1" Body="&lt;p&gt;I had the same issue.&#xA;This is what I am doing as a workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once installed go to System Settings&gt;Keyboard&gt;Shortcuts&gt;Custom&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and bind the follow commands to keys of your choice&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To Decrease:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -dec 10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To Increase:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -inc 10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6834" LastEditorUserId="26" LastEditDate="2016-10-09T00:10:04.783" LastActivityDate="2016-10-09T00:10:04.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8597" PostTypeId="1" AcceptedAnswerId="8608" CreationDate="2016-10-08T17:53:52.807" Score="0" ViewCount="161" Body="&lt;p&gt;Locked laptop, signed back in. This is the result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice, known issues or suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JCfBU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JCfBU.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6834" LastActivityDate="2017-12-03T19:03:17.617" Title="Wallpaper wonked out after signing back in when locked out" Tags="|greeter|nvidia|wallpaper|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8598" PostTypeId="1" AcceptedAnswerId="15979" CreationDate="2016-10-08T18:03:41.710" Score="3" ViewCount="730" Body="&lt;p&gt;I have been using elementary OS on my laptop for nearly a month now and have had a lot of trouble with both hibernation and suspend (resuming to a black screen or frozen desktop). Hibernation is the most troublesome, to the point where I've given up on getting it to work. The biggest issue however is this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[24966.962483] EXT4-fs error (device sda7): ext4_iget:4389: inode #1051637: comm updatedb.mlocat: bogus i_mode (0)&#xA;[24966.992891] Aborting journal on device sda7-8.&#xA;[24967.012781] EXT4-fs (sda7): Remounting filesystem read-only&#xA;[24967.012820] EXT4-fs error (device sda7): ext4_iget:4389: inode #1051638: comm updatedb.mlocat: bogus i_mode (0)&#xA;[24967.037617] EXT4-fs error (device sda7): ext4_iget:4389: inode #1051639: comm updatedb.mlocat: bogus i_mode (0)&#xA;[24967.048450] EXT4-fs error (device sda7): ext4_journal_check_start:56: Detected aborted journal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This has happened a total of five times now either when coming out of hibernate or waking from sleep. Each time after restarting I either get a message telling me to run &lt;code&gt;fsck&lt;/code&gt; manually or, most commonly, just &lt;code&gt;grub&amp;gt;&lt;/code&gt;. In either case, booting from a live USB and running &lt;code&gt;fsck -y /dev/sda7&lt;/code&gt; fixes things for a bit but it's not a cure. I even reinstalled two weeks ago for an unrelated reason but it happened again yesterday after waking my laptop from sleep. What I want to know is why this keeps happening and how to fix it for good. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Also I dual boot with Windows 10&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit 2: It's been a while (months) and the original issue hasn't quite been resolved, but things aren't as bad as before which makes me think either something was fixed in an update or I just have some dodgy hardware. Regarding the error that I first posted, I haven't seen that one since then and haven't been forced to run &lt;code&gt;fsck&lt;/code&gt; either. Still, I don't hibernate anymore. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sleep doesn't trigger freezes as often as before but still causes some problems. A few weeks ago, I got this... ominous looking error: &lt;a href=&quot;https://i.stack.imgur.com/Qpz8i.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qpz8i.jpg&quot; alt=&quot;an ugly hard drive error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the &lt;a href=&quot;https://pastebin.com/kyf2mkti&quot; rel=&quot;nofollow noreferrer&quot;&gt;SMART data&lt;/a&gt; and while I'm not too sure what to make of it, I think the section labeled &lt;em&gt;ATA error count&lt;/em&gt; should be zero. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit 3: So the computer in question had an unfortunate encounter with some hot coffee a few months ago and has been replaced. My new laptop has an SSD partitioned between Windows 10 and Elementary and it handles sleep &lt;em&gt;perfectly&lt;/em&gt;. I can't say anything about hibernation since I don't have a swap partition but honestly, I've gotten use to using sleep only so it's not a big deal anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm willing to close this as a hardware issue with my older laptop since I don't trust any computer that throws IO errors and would have replaced the hard drive at some point. Thanks to everyone who replied!&lt;/p&gt;&#xA;" OwnerUserId="6835" LastEditorUserId="6835" LastEditDate="2018-07-23T05:20:07.497" LastActivityDate="2018-07-23T05:58:35.510" Title="Filesystem errors after resuming from hibernate/suspend" Tags="|release-loki|suspend|filesystem|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="8600" PostTypeId="1" CreationDate="2016-10-08T19:36:36.230" Score="0" ViewCount="79" Body="&lt;p&gt;I have encountered a weird problem with the recent version of Mozilla Firefox (49.0) on Loki. There seems to be a bug when displaying Wikipedia pages - words in italics are simply left out. See e.g. here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gNLUL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gNLUL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With Google Chrome 53.0.2785.143&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nJyLS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nJyLS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and Chromium 53.0.2785.143&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RcxSE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RcxSE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there's no problem at all. I haven't noticed the issue on any other web page except Wikipedia.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?!?&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-10-08T23:53:05.480" LastActivityDate="2017-11-18T21:54:27.457" Title="Firefox 49.0 doesn't show words in italics on Wikipedia" Tags="|release-loki|display|firefox|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8601" PostTypeId="1" AcceptedAnswerId="8603" CreationDate="2016-10-08T20:22:09.340" Score="2" ViewCount="375" Body="&lt;p&gt;Whenever you click on one of those &quot;Browse&quot; or &quot;Open&quot; or &quot;Save As&quot; buttons, a small Files window will launch and you either look for a file to open up or a place to save one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes that functionality disappears, most noticeably in Scratch but also in other applications. The relevant Open or Save button is gone and I can't even overwrite files to override the problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried installing other file managers and set them to default but this made no difference. &lt;/p&gt;&#xA;" OwnerUserId="6669" LastActivityDate="2020-01-30T20:22:31.380" Title="Cannot open or save files from within applications" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8602" PostTypeId="2" ParentId="8444" CreationDate="2016-10-08T20:25:38.250" Score="0" Body="&lt;p&gt;Ok so the problem was tlp package which disable my usb port.&lt;/p&gt;&#xA;" OwnerUserId="6742" LastActivityDate="2016-10-08T20:25:38.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8603" PostTypeId="2" ParentId="8601" CreationDate="2016-10-08T21:10:16.017" Score="2" Body="&lt;p&gt;This can be solved by overriding xsettings: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;File chooser dialog has minimum size much bigger after running that command. This could be annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also this is duplicate of this post: gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&gt;}&quot;&lt;/p&gt;&#xA;" OwnerUserId="6838" LastEditorUserId="6838" LastEditDate="2016-10-09T13:57:31.310" LastActivityDate="2016-10-09T13:57:31.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8604" PostTypeId="2" ParentId="7579" CreationDate="2016-10-08T21:16:01.273" Score="3" Body="&lt;p&gt;The elementary team typically &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/22rhi3/how_long_is_luna_supported_for/&quot; rel=&quot;nofollow&quot;&gt;only supports the latest release&lt;/a&gt; with feature updates, which I think is mainly a volunteer issue than anything else. The team tends to not set firm release dates and follows a &quot;done when it's done&quot; mentality. So now that Loki is released, there isn't a set date for Freya's end-of-life, but Freya-specific issues will likely not garner much attention. You can track the progress on the next release, Juno, &lt;a href=&quot;https://launchpad.net/elementary/+milestone/juno-beta1&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. That will likely be as close as it gets to Loki's end-of-life.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OS is built atop Ubuntu &quot;Long Term Support&quot; releases, which also stop receiving feature support after about nine months but do receive major security fixes for five years (&lt;a href=&quot;https://en.wikipedia.org/wiki/Ubuntu_version_history#Table_of_versions&quot; rel=&quot;nofollow&quot;&gt;April 2021&lt;/a&gt;). The team pushes those security updates to former releases and will post in a public place if for some reason an older release cannot update (users would be expected to upgrade for security reasons at that time).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-08T21:16:01.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8605" PostTypeId="1" CreationDate="2016-10-08T21:39:19.730" Score="1" ViewCount="401" Body="&lt;p&gt;The default email program &quot;Mail&quot; has started behaving very oddly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open it, it starts stretching horizontally as though it's trying to fill the screen, but it keeps going. It becomes unusable: I have to drag and drop the window several times just to get to the icon I need.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't stop expanding and just gets longer and longer, like a piece of spaghetti. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't see a way to delete Mail. I've installed Thunderbird, but it doesn't access my email address book like Mail did, e.g. I type two letters and it gives me all the email address containing those letters. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to use email a lot for my job, and am very close to abandoning eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help!&lt;/p&gt;&#xA;" OwnerUserId="6657" LastActivityDate="2016-10-08T22:56:48.637" Title="Default email stretches across the screen" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="3" ClosedDate="2016-10-08T22:57:47.970" ContentLicense="CC BY-SA 3.0" />
  <row Id="8606" PostTypeId="2" ParentId="8605" CreationDate="2016-10-08T22:56:48.637" Score="2" Body="&lt;p&gt;Typing &lt;strong&gt;dconf reset -f /org/pantheon/mail/&lt;/strong&gt; into a terminal worked.&lt;/p&gt;&#xA;" OwnerUserId="6657" LastActivityDate="2016-10-08T22:56:48.637" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8608" PostTypeId="2" ParentId="8597" CreationDate="2016-10-08T23:40:18.810" Score="0" Body="&lt;p&gt;Well I didn't manage to resolve this, however I did band-aid the issue until I care enough to find a root cause.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My band-aid solution:&#xA;added fix-wallpaper.pl perl script to cerbere you can do this with the elementary-tweaks from Philp Scotts PPA&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tIvte.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tIvte.png&quot; alt=&quot;tweaks&amp;gt;cerbere&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or via dconf-Editor&#xA;org&gt;Pantheon&gt;desktop&gt;cerbere&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aH0HY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aH0HY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;fix-wallpaper.pl:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/perl&#xA;#Run the fix wallpaper script&#xA;my $cmd = &quot;dbus-monitor --session \&quot;type='signal',interface='org.freedesktop.DBus.Properties', member='PropertiesChanged'\&quot;&quot;;&#xA;&#xA;open (IN, &quot;$cmd |&quot;);&#xA;&#xA;while (&amp;lt;IN&amp;gt;) {&#xA;if (m/boolean true/) {&#xA;exec('/home/nathaniel/Documents/Scripts/fix-wallpaper.sh');&#xA;}&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;fix-wallpaper.sh:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#fix wallpaper after unlocking&#xA;set-wallpaper /home/nathaniel/Pictures/wallpaper-312939.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now if the screen locks and I unlock it, it simply re-sets the wallpaper and no longer looks like static demons invaded my wallpaper.&lt;/p&gt;&#xA;" OwnerUserId="6834" LastActivityDate="2016-10-08T23:40:18.810" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8610" PostTypeId="2" ParentId="8600" CreationDate="2016-10-09T00:03:30.780" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Je5qm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Je5qm.png&quot; alt=&quot;Firefox&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm unable to reproduce the error. I suggest right-clicking on the area you want to inspect and selecting &quot;Inspect Element&quot;. Look if anything is out of the ordinary or try to toggle the CSS if you don't have the italics element showing like I do above. Page might just need a refresh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Worst comes to worst, reinstall Firefox. It's likely something off with your configuration. If the issue recurs, it's a bug to take to Firefox's bug tracker.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T00:03:30.780" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8611" PostTypeId="2" ParentId="2382" CreationDate="2016-10-09T00:26:06.820" Score="1" Body="&lt;p&gt;A &lt;a href=&quot;https://plus.google.com/105328164957068530844/posts/PoQrNHjujQo&quot; rel=&quot;nofollow&quot;&gt;Google+ thread&lt;/a&gt; suggested:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-applet&#xA;sudo apt-get install indicator-application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T00:26:06.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8612" PostTypeId="2" ParentId="3586" CreationDate="2016-10-09T00:48:15.747" Score="0" Body="&lt;p&gt;A better resource for the latest packages is &lt;a href=&quot;http://elementary.io/open-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io/open-source&lt;/a&gt;. It explains each of the components of the OS and how they work together. It also links to the technical repository for any aspect of the OS for your education. Enjoy!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/auOQ3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/auOQ3.png&quot; alt=&quot;open source&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T00:48:15.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8613" PostTypeId="2" ParentId="3586" CreationDate="2016-10-09T00:51:24.773" Score="0" Body="&lt;p&gt;In addition to the Open Source page that wolf mentioned, see the &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;nofollow&quot;&gt;elementary metaproject in Launchpad&lt;/a&gt; for a list of the components built by the elementary OS developers.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-10-09T00:51:24.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8614" PostTypeId="2" ParentId="7749" CreationDate="2016-10-09T01:06:39.197" Score="3" Body="&lt;p&gt;&lt;strong&gt;Nope&lt;/strong&gt;, without custom scripting, the OS only supports switching between windows in a workspace (&quot;Switch Windows&quot; in &lt;code&gt;Settings &amp;gt; Keyboard&lt;/code&gt;) and switching between workspaces (&lt;code&gt;org.pantheon.desktop.gala.keybindings cycle-workspaces-next&lt;/code&gt;), but not apps across all workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What you can do, however, is set &lt;strong&gt;&quot;Show All Windows&quot;&lt;/strong&gt; in &lt;code&gt;Settings &amp;gt; Keyboard &amp;gt; Shortcuts&lt;/code&gt; (also &lt;code&gt;org.pantheon.desktop.gala.keybindings expose-all-windows&lt;/code&gt;), which will display every open window across all workspaces so you can choose the window you want.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T01:06:39.197" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8615" PostTypeId="1" CreationDate="2016-10-09T01:47:39.383" Score="1" ViewCount="201" Body="&lt;p&gt;I have an email account with a less than professional name that has lots of accounts linked to it, as well as my Google Play account etc. My school email and my more professional sounding Gmail account link to it instead, so emails that come in to those address go to my first account's inbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reply to these emails I want them to come from the emails they were actually sent to, not my first email. But it's also important to me to be able to read them from my primary email because there are so many things that go there, either from other email accounts that forward to it or just accounts that use that email. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I set this up in Pantheon mail? &lt;/p&gt;&#xA;" OwnerUserId="6669" LastActivityDate="2016-11-08T02:41:26.830" Title="Email alias in Mail?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8616" PostTypeId="2" ParentId="1142" CreationDate="2016-10-09T01:51:58.807" Score="0" Body="&lt;p&gt;&lt;em&gt;I do not have an AMD graphics card installed, however I found this post that details AMD, Nvidia and Intel graphics.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://forlearning.com/graphic-drivers-for-elementary-os/&quot; rel=&quot;nofollow&quot;&gt;Install AMD, Nvidia and Intel graphics&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the middle of the page shows how to install the AMD drivers needed.&lt;/p&gt;&#xA;" OwnerUserId="6804" LastActivityDate="2016-10-09T01:51:58.807" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8617" PostTypeId="2" ParentId="8615" CreationDate="2016-10-09T01:54:46.167" Score="3" Body="&lt;p&gt;&lt;strong&gt;Yes&lt;/strong&gt;, Mail supports aliases. Click the gear in the upper-right corner. &lt;code&gt;Accounts &amp;gt; select account &amp;gt; &quot;Additional email addresses...&quot; &amp;gt; add alias&lt;/code&gt;. When you go to send or reply to an email, if you pop the email out into its own window, you can select the alias you would like to use. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that they will list in the format of &quot;&lt;code&gt;alias@email.com via actual.account@email.com&lt;/code&gt;&quot; (indicating that they will be sent &quot;on behalf of&quot; the account if you don't add the alias as to Mail separately as full accounts.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T01:54:46.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8618" PostTypeId="1" CreationDate="2016-10-09T04:29:29.870" Score="1" ViewCount="924" Body="&lt;p&gt;In freya it was possible to do this by editing apps.css in your theme of choice per &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6840/how-to-replace-wingpanels-applications-text-with-a-icon-in-freya&quot;&gt;How to replace wingpanel&amp;#39;s &amp;quot;Applications&amp;quot; text with a icon in Freya&lt;/a&gt; . So far as I can tell there's no such setting there any more.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may seem a tiny annoyance but since I swap between osx and eos every day it just plain stabs me in the eyes to have some generic &quot;Applications&quot; text there rather than a lovely elementary logo. Is this setting accessible in a file somewhere or do I have to learn enough to hack on wingpanel to make such a thing happen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="6841" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-09T04:29:29.870" Title="Replacing &quot;Applications&quot; in the panel button with an icon" Tags="|wingpanel|applications|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8619" PostTypeId="2" ParentId="8407" CreationDate="2016-10-09T06:17:51.337" Score="0" Body="&lt;p&gt;The OP didn't post their solution, but I'd wager that the answer was to &lt;a href=&quot;http://acer.custhelp.com/app/answers/detail/a_id/36865/~/changing-the-precision-touchpad-settings-in-the-bios&quot; rel=&quot;nofollow noreferrer&quot;&gt;change the trackpad settings in the Acer BIOS&lt;/a&gt;, where &quot;Touchpad&quot; should be set to &quot;Basic&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also follow &lt;a href=&quot;https://www.youtube.com/watch?v=oI2H8g6rM6E&quot; rel=&quot;nofollow noreferrer&quot;&gt;this video&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zCVeN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zCVeN.png&quot; alt=&quot;BIOS&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T06:17:51.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8620" PostTypeId="1" CreationDate="2016-10-09T13:24:46.323" Score="1" ViewCount="1443" Body="&lt;p&gt;I'd like to use Pantheon to connect to a remote server via &lt;code&gt;ssh&lt;/code&gt;. I verified that the credentials correct - I can connect via &lt;code&gt;ssh&lt;/code&gt; in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It appears to connect, but then says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to Mount Folder. Could not connect to the server for this folder.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No matter which folder I choose, &lt;code&gt;/&lt;/code&gt;, &lt;code&gt;~&lt;/code&gt;, or &lt;code&gt;/home/myuser&lt;/code&gt; (I have read access to &lt;code&gt;/&lt;/code&gt;). &lt;/p&gt;&#xA;" OwnerUserId="6820" LastActivityDate="2016-10-09T14:59:18.883" Title="Files: Unable to mount server (SSH)" Tags="|pantheon-files|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8621" PostTypeId="2" ParentId="8450" CreationDate="2016-10-09T13:58:49.260" Score="0" Body="&lt;p&gt;I have a Nvidia GeForce 720 with Intel Core I5 on my desktop system with the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solved by installing the Nvidia-370 driver in here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;" OwnerUserId="245" LastActivityDate="2016-10-09T13:58:49.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8622" PostTypeId="2" ParentId="8620" CreationDate="2016-10-09T14:59:18.883" Score="3" Body="&lt;p&gt;There are two open bugs re: &quot;unable to mount folder&quot; and reading your &lt;code&gt;ssh&lt;/code&gt; config:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1596648&quot; rel=&quot;nofollow&quot;&gt;SFTP and SMB can only access first time&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1615816&quot; rel=&quot;nofollow&quot;&gt;Can't mount ssh/sftp/afp sharing [$100]&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Please subscribe there so as to help the devs diagnose the issue and test the proper fix.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-09T14:59:18.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8626" PostTypeId="2" ParentId="8391" CreationDate="2016-10-09T19:25:30.713" Score="1" Body="&lt;p&gt;Try disabling all video acceleration. Uncheck 3D acceleration. Do not check 2D acceleration. I did this and performance improved markedly. The problem seems to be graphics rendering.&lt;/p&gt;&#xA;" OwnerUserId="6848" LastActivityDate="2016-10-09T19:25:30.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8627" PostTypeId="1" AcceptedAnswerId="8631" CreationDate="2016-10-09T20:44:05.453" Score="0" ViewCount="76" Body="&lt;p&gt;OS: elementary OS 0.4 Loki (64-bit) - Built on Ubuntu 16.04 LTS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Followed instructions here: &lt;a href=&quot;https://infinit.io/downloading&quot; rel=&quot;nofollow&quot;&gt;https://infinit.io/downloading&lt;/a&gt;&#xA;Both installing the .deb and manual method did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When navigating to &lt;code&gt;/opt/infinit/bin/Infinit&lt;/code&gt;, I can see Infinit is listed in the directory. Attempting to open it by running &lt;code&gt;Infinit&lt;/code&gt; results in the following error:&#xA;&lt;code&gt;/opt/infinit/bin/Infinit: error while loading shared libraries: libQtWebKit.so.4: cannot open shared object file: No such file or directory&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to reinstall this library but I'm unsure how to do so or if that's the issue.&lt;/p&gt;&#xA;" OwnerUserId="6852" LastActivityDate="2016-10-09T23:14:58.317" Title="Trouble installing Infinit app on Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8628" PostTypeId="2" ParentId="8587" CreationDate="2016-10-09T20:47:46.043" Score="4" Body="&lt;p&gt;So here is the solution if you are using Parallels to install ElementaryOS Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no Parallel Tools driver issue. It is just Boot Flag setting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation of Parallel Tools, shut down and don't start Loki. Go to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Settings --&gt; Hardware --&gt; Boot Order&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you would see Advanced Settings, where you can set the boot flags. Type there&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;devices.usb.mouse=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And now start your Virtual Machine, it would work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if &lt;code&gt;1&lt;/code&gt; doesn't work then try &lt;code&gt;0&lt;/code&gt;. But for me in Parallels, &lt;code&gt;1&lt;/code&gt; worked&lt;/p&gt;&#xA;" OwnerUserId="6821" LastEditorUserId="7252" LastEditDate="2016-11-11T10:55:59.687" LastActivityDate="2016-11-11T10:55:59.687" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8629" PostTypeId="1" AcceptedAnswerId="8630" CreationDate="2016-10-09T22:28:37.287" Score="13" ViewCount="6483" Body="&lt;p&gt;From time to time, AppCenter will find an update and hang out in my dock with a red, circular &quot;badge&quot; overlay and a number.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SCulA.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SCulA.png&quot; alt=&quot;icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How can I deactivate this persistent dock notification?&lt;/li&gt;&#xA;&lt;li&gt;Separately, how do I stop AppCenter from automatically checking on updates? &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2019-03-31T10:03:49.947" Title="Disable AppCenter dock reminder" Tags="|updates|notifications|appcenter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8630" PostTypeId="2" ParentId="8629" CreationDate="2016-10-09T22:28:37.287" Score="9" Body="&lt;p&gt;The AppCenter periodically shows updates because it runs in the background on startup. To disable its notifications, set it to not run on startup:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;&lt;code&gt;mkdir ~/.config/autostart/&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;&lt;code&gt;cp /etc/xdg/autostart/io.elementary.appcenter-daemon.desktop ~/.config/autostart/&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This copies the AppCenter startup directions from the general autostart folder to your personal folder. (The startup process &lt;a href=&quot;https://specifications.freedesktop.org/autostart-spec/autostart-spec-latest.html#idm140434866702736&quot; rel=&quot;nofollow noreferrer&quot;&gt;prioritizes&lt;/a&gt; directions given in the latter.) Then modify the new file to not load on startup:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;&lt;code&gt;echo &amp;quot;X-GNOME-Autostart-enabled=false&amp;quot; | tee -a ~/.config/autostart/io.elementary.appcenter-daemon.desktop&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;&lt;code&gt;reboot&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;If you would like to keep AppCenter running but just remove the badge, there is currently &lt;a href=&quot;http://bazaar.launchpad.net/%7Eelementary-apps/appcenter/appcenter/view/head:/schemas/org.pantheon.appcenter.gschema.xml&quot; rel=&quot;nofollow noreferrer&quot;&gt;no configuration setting&lt;/a&gt; for this. (Badge counts are &lt;a href=&quot;https://elementaryos.stackexchange.com/q/123/5565&quot;&gt;hardcoded&lt;/a&gt; in their other instances.) If you'd like to build your own version without notifications, start with modifying &lt;a href=&quot;http://bazaar.launchpad.net/%7Eelementary-apps/appcenter/appcenter/view/head:/src/Core/Client.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;/src/Core/Client.vala&lt;/code&gt;&lt;/a&gt; and &lt;a href=&quot;http://bazaar.launchpad.net/%7Eelementary-apps/appcenter/appcenter/view/head:/src/Widgets/AppCellRenderer.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;/src/Widgets/AppCellRenderer.vala&lt;/code&gt;&lt;/a&gt; in the source code.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-11-09T18:35:46.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8631" PostTypeId="2" ParentId="8627" CreationDate="2016-10-09T23:09:28.033" Score="1" Body="&lt;p&gt;This is reported as a bug of missing dependency in Infinit since Ubuntu Trusty. It was answered then as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can create symbolic links for every libQtxxx.so to libQtxxx.so.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a command to do so (You’ll be asked for your password):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;for lib in $(ls /opt/infinit/lib/libQt*.so); do sudo mv $lib $lib.4; done;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://help.infinit.io/forums/306958-current-bugs/suggestions/8957017-missing-dependency-on-ubuntu-trusty&quot; rel=&quot;nofollow&quot;&gt;http://help.infinit.io/forums/306958-current-bugs/suggestions/8957017-missing-dependency-on-ubuntu-trusty&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-10-09T23:14:58.317" LastActivityDate="2016-10-09T23:14:58.317" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8632" PostTypeId="1" CreationDate="2016-10-10T00:08:14.363" Score="3" ViewCount="924" Body="&lt;p&gt;Despite multiple attempts switching between different version of NVIDIA drivers, the only video driver that will allow my laptop display brightness to change (via either settings or hotkey) has been the Noveau driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw a similar post on here somewhere about a System 76 laptop that was unable to change the brightness, but the workaround looked a little above my head. Anyone else experiencing this issue and found a solution?&lt;/p&gt;&#xA;" OwnerUserId="2667" LastActivityDate="2019-05-03T17:01:40.703" Title="Brightness Controls not Working with NVIDIA Drivers" Tags="|brightness|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8633" PostTypeId="2" ParentId="8632" CreationDate="2016-10-10T00:40:31.307" Score="1" Body="&lt;p&gt;I can't change the display brightness via FN-Hotkey either. It work's on the energycontrol-settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the downside of the nuveau-driver for laptops?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do have another problem, probably related to the nvidia-driver: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1628929?comments=all&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1628929?comments=all&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I want to try the nuveau-driver...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quick edit: My starting point was the nuveau-driver. So, on nuveau-driver I can't change display brightness via hotkey. &#xA;I installed the nvidia driver, and can't change the brightness via hotkey, either. Sad.&lt;/p&gt;&#xA;" OwnerUserId="6745" LastEditorUserId="6745" LastEditDate="2016-10-10T00:51:21.827" LastActivityDate="2016-10-10T00:51:21.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8634" PostTypeId="1" CreationDate="2016-10-10T01:34:34.040" Score="0" ViewCount="465" Body="&lt;p&gt;The elementaryOS calendar-app is quite nice but does mix my events up. They are not displayed on the correct dates like they are listet in the googlecalendar-webpage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody encounter the same issue?&lt;/p&gt;&#xA;" OwnerUserId="6745" LastActivityDate="2016-10-10T17:19:38.427" Title="Calendar-App shows events incorrectly (with googlecalendar)" Tags="|applications|" AnswerCount="1" CommentCount="2" ClosedDate="2016-10-12T02:08:56.303" ContentLicense="CC BY-SA 3.0" />
  <row Id="8635" PostTypeId="2" ParentId="8600" CreationDate="2016-10-10T11:43:02.877" Score="0" Body="&lt;p&gt;Try to uninstall extensions and &lt;a href=&quot;https://support.mozilla.org/en-US/kb/reset-preferences-fix-problems&quot; rel=&quot;nofollow&quot;&gt;reset firefox&lt;/a&gt;. If the problem persists, try to reinstall it&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-10-10T11:43:02.877" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8636" PostTypeId="2" ParentId="8592" CreationDate="2016-10-10T12:54:47.977" Score="2" Body="&lt;p&gt;Go into the BIOS menu and make sure internal graphics are disabled. If that doesn't work, try hitting the 'e' key in the grub boot menu, and adding 'nomodeset=1' to the end of the line that starts with 'linux'. Then hit F10 to continue booting.&lt;/p&gt;&#xA;" OwnerUserId="5907" LastActivityDate="2016-10-10T12:54:47.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8638" PostTypeId="1" CreationDate="2016-10-10T16:36:45.030" Score="1" ViewCount="103" Body="&lt;p&gt;Congrats on a great and simple distro. After install of Loki I downloaded a bunch of apps no problem One day later the AppCenter shows everything as uninstalled ( they are installed and mostly working) However that means I ca't download anything else because it wants to install all apps when I press install for any app I did however managed to install aan app using terminal.&lt;/p&gt;&#xA;" OwnerUserId="6658" LastActivityDate="2016-11-23T16:26:17.273" Title="Loki AppCenter is listing all apps as uninstalled" Tags="|updates|appcenter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8639" PostTypeId="2" ParentId="8634" CreationDate="2016-10-10T17:19:38.427" Score="4" Body="&lt;p&gt;I have the same issue.  I have reported it as bug in Launchpad:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1632014&quot; rel=&quot;noreferrer&quot;&gt;Calendar bugs page&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can mark that it affect to you, to bring devs attention to it.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-10-10T17:19:38.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8640" PostTypeId="2" ParentId="8629" CreationDate="2016-10-10T17:59:05.080" Score="8" Body="&lt;p&gt;To the first question, you can open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the reminder dessapears from Planck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To the second question, you can try to show all the hidden startup applications. Open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then launch the Gnome session properties from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome-session-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look for the appcenter launcher and uncheck it. It called:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;appcenter -s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source of some parts of this answer by &lt;a href=&quot;https://unix.stackexchange.com/users/32012/cipricus&quot;&gt;@cipricus&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/q/184751/194322&quot;&gt;How to access and edit Startup applications in Elementary OS Freya beta 2?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-10-10T17:59:05.080" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8641" PostTypeId="1" CreationDate="2016-10-10T18:08:52.730" Score="0" ViewCount="326" Body="&lt;p&gt;Cant get to Tor! Installed from AppCenter no problem, the Tor launcher settings show as installed in applications but I get the same error in both get error connecting to Tor at tacp: 127.0.0.1:9050 &#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="6658" LastActivityDate="2018-08-02T17:01:25.010" Title="in Loki after install get error connecting to Tor at tacp: 127.0.0.1:9050" Tags="|appcenter|internet|tor|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8644" PostTypeId="2" ParentId="4318" CreationDate="2016-10-10T19:38:40.880" Score="0" Body="&lt;p&gt;This is a complement (tested in Loki) to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8374/170&quot;&gt;the other answer&lt;/a&gt; that shows that a good command is &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-terminal -w ''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;pantheon-terminal -w %u&lt;/code&gt; is present in the file &lt;code&gt;usr/share/applications/open-pantheon-terminal-here.desktop&lt;/code&gt;. The `''´ part is needed in that &lt;em&gt;some&lt;/em&gt; character has to be used there, but anything can go, like a dot, or even a poetry line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-terminal -w 'My name is Ozymandias, king of kings: Look on my works, ye Mighty, and despair!'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command can be used to replace the default one in &lt;code&gt;usr/share/applications/org.pantheon.terminal.desktop&lt;/code&gt; (the default desktop file of the terminal), or in a new desktop file to be kept in dock, etc.; also, the default Super-T can be reassigned to this command, or a new shortcut can be created for this command in &lt;em&gt;Keyboard &gt; Custom &gt; Add&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uL8M5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uL8M5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-10T20:27:34.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8646" PostTypeId="1" CreationDate="2016-10-10T22:29:25.613" Score="3" ViewCount="719" Body="&lt;p&gt;I am trying to get my hybrid graphics working properly.  I have an Acer aspire E5-57G.  Here is the info about my hybrid graphics as described by lspci -kv:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;00:02.0 VGA compatible controller: Intel Corporation Sky Lake Integrated Graphics (rev 07) (prog-if 00 [VGA controller])&#xA;    Subsystem: Acer Incorporated [ALI] Skylake Integrated Graphics&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 130&#xA;    Memory at 92000000 (64-bit, non-prefetchable) [size=16M]&#xA;    Memory at a0000000 (64-bit, prefetchable) [size=256M]&#xA;    I/O ports at 5000 [size=64]&#xA;    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]&#xA;    Capabilities: [40] Vendor Specific Information: Len=0c &#xA;    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00&#xA;    Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable- 64bit-&#xA;    Capabilities: [d0] Power Management version 2&#xA;    Capabilities: [100] #1b&#xA;    Capabilities: [200] Address Translation Service (ATS)&#xA;    Capabilities: [300] #13&#xA;    Kernel driver in use: i915&#xA;    Kernel modules: i915&#xA;01:00.0 3D controller: NVIDIA Corporation Device 179c (rev ff) (prog-if ff)&#xA;    !!! Unknown header type 7f&#xA;    Kernel modules: nvidiafb, nouveau, nvidia_367, nvidia_367_drm&#xA;&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have followed the directions explained at &lt;a href=&quot;https://mintguide.org/video/508-easily-switch-nvidia-hybrid-graphics-nvdia-intel.html&quot; rel=&quot;nofollow&quot;&gt;https://mintguide.org/video/508-easily-switch-nvidia-hybrid-graphics-nvdia-intel.html&lt;/a&gt; and it seems like I &lt;em&gt;sort of&lt;/em&gt; have my hybrid graphics working, at least as far as bbswitch can do it.  But it doesn't work very well; for example, if the screen powers off after enough time of inactivity has elapsed, the desktop graphic is screwed up.  For now, I have only the intel card active.  But, as you can see from the lspci output, there's an issue with the recognition of the NVidia card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The relevant output of dmesg (I've included everything, and possibly more than necessary, regarding video) is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;[    1.563668] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5&#xA;[    1.563771] [Firmware Bug]: ACPI(PXSX) defines _DOD but not _DOS&#xA;[    1.563780] ACPI: Video Device [PXSX] (multi-head: yes  rom: yes  post: no)&#xA;[    1.563815] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:01/input/input6&#xA;[    1.563876] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0&#xA;[    4.227045] nvidia: loading out-of-tree module taints kernel.&#xA;[    4.227050] nvidia: module license 'NVIDIA' taints kernel.&#xA;[    4.227051] Disabling lock debugging due to kernel taint&#xA;[    4.229429] ath10k_pci 0000:03:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0&#xA;[    4.231463] nvidia: module verification failed: signature and/or required key missing - tainting kernel&#xA;[    4.243859] nvidia 0000:01:00.0: enabling device (0006 -&gt; 0007)&#xA;[    4.244038] nvidia-nvlink: Nvlink Core is being initialized, major device number 244&#xA;[    4.244050] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  367.44  Wed Aug 17 22:24:07 PDT 2016&#xA;[    4.354098] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  367.44  Wed Aug 17 21:54:40 PDT 2016&#xA;[    4.355592] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver&#xA;[    4.535262] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243&#xA;[    4.651841] bbswitch: version 0.8&#xA;[    4.651845] bbswitch: Found integrated VGA device 0000:00:02.0: _SB_.PCI0.GFX0&#xA;[    4.651850] bbswitch: Found discrete VGA device 0000:01:00.0: _SB_.PCI0.RP01.PXSX&#xA;[    4.651873] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.652028] bbswitch: detected an Optimus _DSM function&#xA;[    4.652037] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on&#xA;[    4.667587] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667630] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667659] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667697] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667719] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667772] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.667795] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.674346] random: crng init done&#xA;[    4.686181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    4.686182] Bluetooth: BNEP filters: protocol multicast&#xA;[    4.686185] Bluetooth: BNEP socket layer initialized&#xA;[    4.729195] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.921450] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready&#xA;[    4.942385] r8169 0000:04:00.1 enp4s0f1: link down&#xA;[    4.942952] IPv6: ADDRCONF(NETDEV_UP): enp4s0f1: link is not ready&#xA;[    4.959563] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    4.964355] nvidia-uvm: Unloaded the UVM driver in 8 mode&#xA;[    4.993315] [drm] [nvidia-drm] [GPU ID 0x00000100] Unloading driver&#xA;[    5.013083] nvidia-modeset: Unloading&#xA;[    5.037081] nvidia-nvlink: Unregistered the Nvlink Core, major device number 244&#xA;[    5.056776] bbswitch: disabling discrete graphics&#xA;[    5.056787] ACPI Warning: _SB.PCI0.RP01.PXSX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts about how I can resolve some of these things beyond what I have already tried?  The NVidia card was not working at all before this, but if I am going to use it at all, I would prefer that it worked properly! :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Steve&lt;/p&gt;&#xA;" OwnerUserId="6865" LastActivityDate="2018-09-30T21:00:35.683" Title="NVidia Geforce 940mx and Intel Skylake graphics hybrid. Proper configuration?" Tags="|release-loki|nvidia|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8647" PostTypeId="1" CreationDate="2016-10-10T23:00:21.263" Score="0" ViewCount="182" Body="&lt;p&gt;As I have stated in the title the loading icon animations are seem to be freezing. I have experienced this in the AppCenter update tab and during the Wi-Fi connection. However after a while the processes are completed. Is this issue related with the Loki update ? Do you know any bug report for this issue ?&lt;/p&gt;&#xA;" OwnerUserId="6564" LastEditorUserId="14940" LastEditDate="2019-01-01T22:02:44.547" LastActivityDate="2024-01-06T10:04:25.560" Title="Loading animation freezing in Loki" Tags="|release-loki|wifi|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8649" PostTypeId="1" AcceptedAnswerId="8650" CreationDate="2016-10-11T01:47:08.677" Score="2" ViewCount="998" Body="&lt;p&gt;Although the Applications Launcher is &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/794454/comments/12&quot; rel=&quot;nofollow noreferrer&quot;&gt;apparently supposed to&lt;/a&gt; take on the role of &lt;code&gt;Alt-F2&lt;/code&gt;-like command execution as well, it does not have useful features such as tab-completion of the command, command history, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to enable &lt;code&gt;Alt-F2&lt;/code&gt; functionality in elementaryOS (Loki in this case)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(The &lt;code&gt;zenith&lt;/code&gt;-based method &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5529/whats-the-hotkey-to-run-a-command/5530#5530&quot;&gt;mentioned in this thread&lt;/a&gt; doesn't provide these features either.)&lt;/p&gt;&#xA;" OwnerUserId="6866" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-11T06:08:01.077" Title="How to enable Alt-F2 command execution with tab-completion?" Tags="|keyboard-shortcuts|launcher|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8650" PostTypeId="2" ParentId="8649" CreationDate="2016-10-11T01:47:08.677" Score="4" Body="&lt;p&gt;As mentioned in the other comments in &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/794454&quot; rel=&quot;nofollow&quot;&gt;that bug report thread&lt;/a&gt;, there are a few other options using external software, to enable full &lt;code&gt;Alt-F2&lt;/code&gt; functionality. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's &lt;code&gt;gmrun&lt;/code&gt; and &lt;code&gt;synapse&lt;/code&gt;, both of which are available in the apt repository sources to install (&lt;code&gt;sudo apt install gmrun&lt;/code&gt;, or &lt;code&gt;sudo apt install synapse&lt;/code&gt;). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xfrun4&lt;/code&gt; is also mentioned as part of &lt;code&gt;xfce4-utils&lt;/code&gt; package, but that one doesn't seem to be available in the default repo sources. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gmrun&lt;/code&gt; is a very small download (&amp;lt;100kB) that produces a simple text box with tab-completion and history, no bells and whistles beyond that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;synapse&lt;/code&gt; tries to be more comprehensive, perhaps similar to 'Launchy' for Windows or 'Spotlight' on MacOS. It has a pretty good-looking GUI, has those core features of tab-completion and history, along with the ability to search your Images, Audio, Documents, etc. optionally. That predictably brings in allegations of being &quot;bloated&quot; as mentioned in the thread, though that's obviously subjective and depends on your preferences. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable the shortcut key:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;for &lt;code&gt;gmrun&lt;/code&gt;: go to &lt;code&gt;System settings -&amp;gt; Keyboard -&amp;gt; Shortcuts tab&lt;/code&gt;, choose &lt;code&gt;Custom&lt;/code&gt; in the left panel, click on the &lt;code&gt;+&lt;/code&gt; button at the bottom and enter the name of the program (&lt;code&gt;gmrun&lt;/code&gt;). Then click on the text that says &lt;code&gt;Disabled&lt;/code&gt; next to the command name, and press &lt;code&gt;Alt-F2&lt;/code&gt; to assign that shortcut to it. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;for &lt;code&gt;synapse&lt;/code&gt;: go to &lt;code&gt;System settings -&amp;gt; Applications -&amp;gt; Startup&lt;/code&gt;, click on the &lt;code&gt;+&lt;/code&gt; button at the bottom and enter the name of the program (&lt;code&gt;synapse&lt;/code&gt;), choose the Synapse program entry shown there. Then, if you wish to have the shortcut to be &lt;code&gt;Alt-F2&lt;/code&gt; instead of the default &lt;code&gt;Ctrl-Space&lt;/code&gt; (which didn't reliably work for me, for some reason), start &lt;code&gt;synapse&lt;/code&gt; manually from the terminal or Launcher, click the small circle on the top right and choose Preferences, and there change the shortcut for Activate to &lt;code&gt;Alt-F2&lt;/code&gt;. (If the Preferences window doesn't show the actual shortcuts, right click on the window's titlebar and choose Maximize.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="6866" LastEditorUserId="6866" LastEditDate="2016-10-11T06:08:01.077" LastActivityDate="2016-10-11T06:08:01.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8652" PostTypeId="1" AcceptedAnswerId="8654" CreationDate="2016-10-11T03:06:49.877" Score="1" ViewCount="152" Body="&lt;p&gt;I am aware of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7848/is-there-a-way-to-see-changelog-of-update&quot;&gt;the request and bounty for viewing the changelog associated with an OS update in the App Center&lt;/a&gt;.  In the meantime, is there anywhere else we can find the changelog?  Perhaps somewhere on Launchpad (most likely would be Announcements on &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;the main launchpad page for elementary&lt;/a&gt;, but not all updates have an accompanying announcement)?  I just want to know whether any given update includes a fix for one of the bugs I've been experiencing, or is a security patch, or is cosmetic in nature, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running Loki.&lt;/p&gt;&#xA;" OwnerUserId="6868" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-11T04:35:05.490" Title="Interim way to view changelog when OS updates are available?" Tags="|release-loki|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8653" PostTypeId="2" ParentId="8641" CreationDate="2016-10-11T03:33:07.213" Score="1" Body="&lt;p&gt;Solved! &#xA;Thank you guys. I was able to download Tor using using terminal  Info at: &lt;a href=&quot;https://askubuntu.com/questions&quot;&gt;https://askubuntu.com/questions&lt;/a&gt; In this thread: &#xA;tor browser install ubuntu 14.04&#xA;Install from Terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: If you installed older version of Tor-Browser, in first you must clear the old .tor-browser-en folder from home folder. Just clear that by using: cd ~ &amp;amp;&amp;amp; rm -r .tor-browser-en&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then type following line one by one in Terminal ( Ctrl+Alt+T ) to install Tor-Browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:webupd8team/tor-browser&#xA; sudo apt-get update&#xA; sudo apt-get install tor-browser&#xA;Now open dash and type &quot;Tor&quot;, click on and use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;shareedit&#xA;answered Aug 23 '14 at 16:12&lt;/p&gt;&#xA;&#xA;&lt;p&gt;KasiyA&#xA;13.7k1456109&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course this is great for me because I am a noob, but for you guys  .. well have patience with us beginners. Thanks once more&lt;/p&gt;&#xA;" OwnerUserId="6658" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-10-11T03:33:07.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8654" PostTypeId="2" ParentId="8652" CreationDate="2016-10-11T04:35:05.490" Score="2" Body="&lt;p&gt;When Launchpad projects do include changelogs, they are created with the &lt;code&gt;.deb&lt;/code&gt; packaging and have no substantive detail. For example, see logs for &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/pantheon-files/deb-packaging/view/head:/debian/changelog&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;pantheon-files&lt;/code&gt;&lt;/a&gt; or &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/wingpanel-indicator-sound/deb-packaging/view/head:/debian/changelog&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;wingpanel-indicator-sound&lt;/code&gt;&lt;/a&gt;, which also viewable once downloaded at &lt;code&gt;/usr/share/docs/&lt;/code&gt; in folders by package name. Launchpad &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1612810/comments/2&quot; rel=&quot;nofollow noreferrer&quot;&gt;doesn't support&lt;/a&gt; changelogs for PPAs. So unless elementary devs go out of their way to manually create specific notes alongside new releases, there is no summarized accounting for the changed code, nevertheless something accessible. For non-elementary packages that do contain news files/changelogs, you can &lt;a href=&quot;http://jxf.me/entries/better-apt-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;install &lt;code&gt;apt-listchanges&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are following bugs in a specific elementary app, you can go to its Launchpad page &gt; &quot;Bugs&quot; tab, sort by &quot;Status&quot; descending, which will list the most recent &quot;fixes committed&quot; at the top. And if you are following individual bugs, there is an option in the sidebar of each bug's page to receive notifications only when the issue is closed, if that would help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dgXTZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dgXTZ.png&quot; alt=&quot;Add a mail subscription&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-11T04:35:05.490" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8655" PostTypeId="1" AcceptedAnswerId="8665" CreationDate="2016-10-11T08:18:31.360" Score="0" ViewCount="379" Body="&lt;p&gt;I cannot figure out how to install Vuze (or Miro) on eOS.  I am unable to add the repository... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help?  &lt;/p&gt;&#xA;" OwnerUserId="5278" LastActivityDate="2016-10-11T15:30:28.823" Title="How do I install Vuze?" Tags="|software-installation|thirdpartyapps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8657" PostTypeId="1" AcceptedAnswerId="8689" CreationDate="2016-10-11T10:35:50.550" Score="2" ViewCount="580" Body="&lt;p&gt;After installing nvidia-370 drivers from official PPA, I cannot boot into my system from first try. So, basically each time I try to start my machine, after initial bios diagnostics it produces this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1xvne.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1xvne.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Text is mine. What I meant to say - it should have allowed me to enter password, but it doesn't. No terminals are available either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, after force shutdown and reboot, I get this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TbrMv.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TbrMv.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;On which I successfully can enter my password and boot up the system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question is - how do I fix this? The best solution would be to enable decrypting elementary using standard text-box (on first screen), but if it's not possible, I agree for console option.&lt;/p&gt;&#xA;" OwnerUserId="6871" LastActivityDate="2016-10-14T03:45:46.027" Title="Encrypted Elementary doesn't boot on first try" Tags="|release-loki|boot|encryption|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8659" PostTypeId="2" ParentId="4961" CreationDate="2016-10-11T13:28:50.813" Score="1" Body="&lt;p&gt;In elementary OS 0.4 (Loki), the way to set the compose key is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;em&gt;Systems Settings&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;em&gt;Keyboard&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;em&gt;Layout&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select which key you want to use as your &lt;em&gt;Compose key&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6873" LastActivityDate="2016-10-11T13:28:50.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8660" PostTypeId="1" AcceptedAnswerId="8661" CreationDate="2016-10-11T13:33:09.837" Score="4" ViewCount="4597" Body="&lt;p&gt;Existing guides specify to install the &lt;code&gt;libdvdread4&lt;/code&gt; package and then run &lt;code&gt;sudo /usr/share/doc/libdvdread4/install-css.sh&lt;/code&gt; to install DVD decryption support. However on Loki, this results in &lt;em&gt;sudo: command not found&lt;/em&gt;. Inspecting the &lt;code&gt;libdvdread4&lt;/code&gt; indeed reveals that the &lt;code&gt;install-css.sh&lt;/code&gt; script is missing.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2021-05-22T09:34:22.977" Title="How to play a DVD on Loki?" Tags="|release-loki|videos|audience|video-player|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8661" PostTypeId="2" ParentId="8660" CreationDate="2016-10-11T13:33:09.837" Score="4" Body="&lt;p&gt;Since Ubuntu 15.10, &lt;code&gt;libdvdcss&lt;/code&gt; (the package required for CSS decryption) is installed as part of the &lt;code&gt;libdvd-pkg&lt;/code&gt; package, with no additional steps required.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The default &lt;em&gt;Videos&lt;/em&gt; app in elementary OS is quite buggy, and while the &lt;em&gt;Play Disc&lt;/em&gt; option appears after installing CSS support, playback fails. A workaround is simply to install &lt;em&gt;VLC&lt;/em&gt;, which is generally more stable and has better format support.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/RestrictedFormats/PlayingDVDs&quot; rel=&quot;noreferrer&quot;&gt;Source and more info&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-10-11T13:33:09.837" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8663" PostTypeId="1" CreationDate="2016-10-11T14:15:47.840" Score="4" ViewCount="1204" Body="&lt;p&gt;I've recently started seeing a delay (about a minute or so) after entering my password in greeter and the desktop showing up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I filed this bug &lt;a href=&quot;https://bugs.launchpad.net/pantheon-greeter/+bug/1632317&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/pantheon-greeter/+bug/1632317&lt;/a&gt; thinking it was to do with the PAM kwallet module but it appears the issue still occurs for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else seeing this delay during login and anything I can do to help troubleshoot?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Something to do with Gala startup maybe?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just noticed this in my dmesg:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[  101.343635] show_signal_msg: 27 callbacks suppressed&#xA;[  101.343638] loader[1699]: segfault at 88 ip 00007f7d7cca9633 sp 00007f7d361d1008 error 4 in libgtk-3.so.0.1800.9[7f7d7cb32000+71a000]&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2017-03-09T15:30:32.563" Title="Delay during login after entering correct password in Loki" Tags="|release-loki|greeter|gala|" AnswerCount="2" CommentCount="4" ClosedDate="2018-03-11T02:01:16.177" ContentLicense="CC BY-SA 3.0" />
  <row Id="8665" PostTypeId="2" ParentId="8655" CreationDate="2016-10-11T15:30:28.823" Score="1" Body="&lt;p&gt;sudo sh -c 'echo &quot;deb &lt;a href=&quot;http://archive.getdeb.net/ubuntu&quot; rel=&quot;nofollow&quot;&gt;http://archive.getdeb.net/ubuntu&lt;/a&gt; xenial-getdeb apps&quot; &gt;&gt; /etc/apt/sources.list.d/getdeb.list'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;wget -q -O- &lt;a href=&quot;http://archive.getdeb.net/getdeb-archive.key&quot; rel=&quot;nofollow&quot;&gt;http://archive.getdeb.net/getdeb-archive.key&lt;/a&gt; | sudo apt-key add -&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install vuze&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt remove vuze &amp;amp;&amp;amp; sudo apt autoremove&lt;/p&gt;&#xA;" OwnerUserId="4884" LastActivityDate="2016-10-11T15:30:28.823" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8666" PostTypeId="2" ParentId="8663" CreationDate="2016-10-11T15:34:50.343" Score="5" Body="&lt;p&gt;OK after some digging around, the output of journalctl command showed the following when the delay occurred at the time of login finally happening after 90 seconds:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Oct 11 20:50:18 skybird gnome-session[2743]: gnome-session-binary[2743]: WARNING: Application 'at-spi-dbus-bus.desktop' failed to register before timeout&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and renaming away in &lt;code&gt;/etc/xdg/autostart&lt;/code&gt; the file to &lt;code&gt;at-spi-dbus-bus.desktop.disabled&lt;/code&gt; and after a few reboots seems this issue is not occurring for me.&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2016-10-11T15:34:50.343" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8667" PostTypeId="2" ParentId="8647" CreationDate="2016-10-11T16:59:03.437" Score="0" Body="&lt;p&gt;I have not seen a bug like this (then again, I rarely look at the bug reports :P ).  Could this be a graphical glitch?  The system may be doing a large update, and it requires a great deal of system resources.  This could be what's causing the freeze: the system can't properly draw the animations due to the use of the resources.&lt;/p&gt;&#xA;" OwnerUserId="740" LastActivityDate="2016-10-11T16:59:03.437" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8675" PostTypeId="1" CreationDate="2016-10-12T09:17:05.507" Score="4" ViewCount="3602" Body="&lt;p&gt;The new AppCenter appears to periodically and automatically update the &lt;code&gt;apt&lt;/code&gt; indexes which is not a problem, however, &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1587975&quot; rel=&quot;nofollow&quot; title=&quot;Packagekitd eats up all the cpu&quot;&gt;this bug&lt;/a&gt; means that every time it does so, &lt;code&gt;packagekitd&lt;/code&gt; hogs CPU until I purposefully kill it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way that I can disable the auto-update feature in AppCenter or the otherwise responsible application whilst the bug is attended to?&lt;/p&gt;&#xA;" OwnerUserId="6890" LastActivityDate="2019-04-17T19:12:38.720" Title="How to disable auto-update in Loki" Tags="|release-loki|appcenter|" AnswerCount="2" CommentCount="4" ClosedDate="2019-04-17T19:35:00.343" ContentLicense="CC BY-SA 3.0" />
  <row Id="8676" PostTypeId="1" CreationDate="2016-10-12T12:39:54.683" Score="2" ViewCount="6309" Body="&lt;p&gt;App center is dead. I have no idea where to start troubleshooting.&#xA;I'm currently manually updating the system and is kept up to date....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions welcome.&lt;/p&gt;&#xA;" OwnerUserId="6200" LastActivityDate="2021-12-12T09:12:31.243" Title="App Center does not start" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8677" PostTypeId="2" ParentId="8632" CreationDate="2016-10-12T12:56:35.430" Score="-1" Body="&lt;p&gt;Check this post. Should be the same logic for you brightness keys&#xA;You need correct key binding in d-conf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7628/loki-media-keys-shortcuts-volume-keys-broken&quot;&gt;Loki - Media Keys, Shortcuts, Volume Keys broken&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6200" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-12T12:56:35.430" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8679" PostTypeId="1" CreationDate="2016-10-12T14:29:49.317" Score="0" ViewCount="230" Body="&lt;p&gt;Anyone tried using covergloobus on Loki?i have installed it.but it cant detect any player?Any suggestions guys?&#xA;I have tried installing .dev files.But It just not works.&lt;/p&gt;&#xA;" OwnerUserId="6892" LastActivityDate="2016-10-15T20:11:22.870" Title="Covergloobus On Loki" Tags="|release-loki|music|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8680" PostTypeId="2" ParentId="8663" CreationDate="2016-10-12T16:06:30.593" Score="0" Body="&lt;p&gt;For me, this issue is related after installing Java. Also, sometimes when I do the apt-get update, some packages gets an error.&#xA;I uninstalled java and also removed the packages that gives me errors on apt-get.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2016-10-12T16:06:30.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8681" PostTypeId="1" CreationDate="2016-10-12T16:07:40.933" Score="1" ViewCount="116" Body="&lt;p&gt;Since about 1 week i got problems with resume from suspend.&#xA;Chrome has black areas and thunderbird has missing icons and no text.&#xA;When i restart these applications they are back to normal. This happens after every resume from suspend.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon-files has the same problem as Thunderbird.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can i provide any log information about this special problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshots: &lt;a href=&quot;https://i.stack.imgur.com/Gt8YH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Chrome and Thunderbird&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2784" LastActivityDate="2016-10-12T16:07:40.933" Title="Resume from suspend: missing icons, blank text and black areas in applications," Tags="|pantheon-files|google-chrome|suspend|thunderbird|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8682" PostTypeId="1" AcceptedAnswerId="8816" CreationDate="2016-10-12T21:48:19.470" Score="0" ViewCount="283" Body="&lt;p&gt;This is the error I get. I googled for an answer but none of those worked at all.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;JVM terminated. Exit code=1&#xA;/usr/bin/java&#xA;-Xms40m&#xA;-Xmx384m&#xA;-Dorg.eclipse.equinox.p2.reconciler.dropins.directory=/usr/share/eclipse/dropins&#xA;-XX:MaxPermSize=256m&#xA;-jar /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.3.0.dist.jar&#xA;-os linux&#xA;-ws gtk&#xA;-arch x86_64&#xA;-showsplash /usr/lib/eclipse//plugins/org.eclipse.platform_3.8.1.dist/splash.bmp&#xA;-launcher /usr/lib/eclipse/eclipse&#xA;-name Eclipse&#xA;--launcher.library /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.dist/eclipse_1503.so&#xA;-startup /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.3.0.dist.jar&#xA;--launcher.overrideVmargs&#xA;-exitdata 29800b&#xA;-clean&#xA;-initialize&#xA;-vm /usr/bin/java&#xA;-vmargs&#xA;-Xms40m&#xA;-Xmx384m&#xA;-Dorg.eclipse.equinox.p2.reconciler.dropins.directory=/usr/share/eclipse/dropins&#xA;-XX:MaxPermSize=256m&#xA;-jar /usr/lib/eclipse//plugins/org.eclipse.equinox.launcher_1.3.0.dist.jar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="5565" LastEditDate="2016-10-13T00:27:06.477" LastActivityDate="2016-10-20T07:25:09.693" Title="Eclipse and Aptana Studio 3 not working; How can I fix this issue?" Tags="|release-loki|eclipse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8684" PostTypeId="2" ParentId="8181" CreationDate="2016-10-13T04:58:36.433" Score="0" Body="&lt;p&gt;Okay after a while Christian Medel responded me that the issue was caused by the base code now they have uploaded a new version of it here is the link &lt;a href=&quot;https://codeload.github.com/B00merang-Project/macOS-Sierra/zip/master&quot; rel=&quot;nofollow&quot;&gt;Github link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6564" LastActivityDate="2016-10-13T04:58:36.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8685" PostTypeId="1" CreationDate="2016-10-13T05:37:20.823" Score="0" ViewCount="2165" Body="&lt;p&gt;Running from the GUI I get &quot;Box setup failed&quot; -pretty sparse there Gnome team!! (I know this is the elementary forum, but just saying...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running from Terminal, I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(gnome-boxes:31127): Boxes-WARNING **: wizard.vala:463: Incapable host system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm posting this here because this only happens with elementary OS Loki. VirtualBox works fine...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THANKS!!!&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2024-03-16T02:03:35.377" Title="Gnome Boxes won't create a VM" Tags="|pantheon-terminal|vala|gnome|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8687" PostTypeId="1" AcceptedAnswerId="8706" CreationDate="2016-10-13T08:29:03.190" Score="0" ViewCount="35" Body="&lt;p&gt;Is it possible? Language packs are installed.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="5565" LastEditDate="2016-10-13T14:51:41.287" LastActivityDate="2016-10-14T09:39:39.390" Title="How to enable digit grouping (thousands separators) in calculator?" Tags="|release-loki|calculator|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8688" PostTypeId="1" CreationDate="2016-10-13T10:54:57.153" Score="1" ViewCount="678" Body="&lt;p&gt;I couldn't find any way of doing it. Does anyone else know?&lt;/p&gt;&#xA;" OwnerUserId="6902" LastEditorUserId="5565" LastEditDate="2016-10-14T00:57:07.163" LastActivityDate="2016-11-13T01:39:49.970" Title="How can I change keyboard shortcuts for Epiphany?" Tags="|keyboard-shortcuts|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8689" PostTypeId="2" ParentId="8657" CreationDate="2016-10-13T12:15:28.480" Score="3" Body="&lt;p&gt;Actually, that seems like a regular problem across Linux, when people try to use NVIDIA drivers and encrypted file-system. Plymouth doesn't play well with NVIDIA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The temporary solution is to disable splash screen during boot:&#xA;&lt;code&gt;&#xA;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In editor, change &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;splash quiet&quot;&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;nosplash quiet&quot;&lt;/code&gt;. Make the same adjustments to the&lt;code&gt;GRUB_CMDLINE_LINUX&lt;/code&gt; if it's not empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then update grub using &lt;code&gt;sudo update-grub&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps somebody.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/574296/cannot-enter-password-to-start-ubuntu&quot;&gt;Cannot enter password to start Ubuntu&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1530548&quot; rel=&quot;nofollow&quot;&gt;passphrase input-box for encrypted disk is not shown&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1386005&quot; rel=&quot;nofollow&quot;&gt;Password not accepted graphical boot for encrypted root system&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6871" LastActivityDate="2016-10-13T12:15:28.480" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8690" PostTypeId="2" ParentId="8688" CreationDate="2016-10-13T15:28:54.953" Score="1" Body="&lt;p&gt;After some digging, this appears to be hardcoded. E.g., see &quot;&lt;code&gt;&amp;lt;shift&amp;gt;&amp;lt;control&amp;gt;I&lt;/code&gt;&quot; when &lt;a href=&quot;https://git.gnome.org/browse/epiphany/commit/?id=82be33bd7ee5be099111c7d0e63ea295fa4bb335&quot; rel=&quot;nofollow&quot;&gt;a new shortcut was added&lt;/a&gt;. There was also a shortcuts dialog &lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=757830&quot; rel=&quot;nofollow&quot;&gt;added in July 2016&lt;/a&gt; but it appears to show the shortcuts rather than let you edit them, and I'm not sure whether it made the cut into elementary's Epiphany.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So your best bet (without recompiling from source with your own fixes) is to use &lt;strong&gt;&lt;code&gt;sudo apt install autokey&lt;/code&gt;&lt;/strong&gt;, which adds an easy interface for mapping a new shortcut to the existing one. You can also set the keyboard &quot;phrase&quot; to only trigger within Epiphany. &lt;a href=&quot;https://help.gnome.org/users/epiphany/stable/keyboard-shortcut.html.en&quot; rel=&quot;nofollow&quot;&gt;Here&lt;/a&gt; is GNOME's list of shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-13T15:28:54.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8691" PostTypeId="1" CreationDate="2016-10-13T18:21:30.190" Score="1" ViewCount="119" Body="&lt;p&gt;The &lt;em&gt;Energy&lt;/em&gt; plug shows the following options for &lt;em&gt;When the lid is closed&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wkZlA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wkZlA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get what &lt;em&gt;Suspender&lt;/em&gt; (suspend), and &lt;em&gt;Apagar&lt;/em&gt; (shut-down) mean. But, what do &lt;em&gt;Halt&lt;/em&gt;, and &lt;em&gt;Block&lt;/em&gt; mean?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW: the Spanish plug needs translation.&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-10-14T08:24:14.003" Title="Meaning of options in Energy plug" Tags="|release-loki|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8692" PostTypeId="1" AcceptedAnswerId="8694" CreationDate="2016-10-13T19:30:37.313" Score="2" ViewCount="1831" Body="&lt;p&gt;I've set Scratch to show a welcome screen every time I open it so it doesn't show what I was doing previously.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I just accidentally closed it and lost something I didn't save that I want to recover. I've read somewhere that Scratch makes backups of unsaved files somewhere. So my question is, where can I find those backups? &lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-10-13T22:32:28.230" Title="Where does Scratch saves temporary files?" Tags="|files|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8693" PostTypeId="2" ParentId="7478" CreationDate="2016-10-13T21:31:05.380" Score="1" Body="&lt;p&gt;It works perfectly, it enables DLNA server functionality, NOT Samba. :)&lt;/p&gt;&#xA;" OwnerUserId="6912" LastActivityDate="2016-10-13T21:31:05.380" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8694" PostTypeId="2" ParentId="8692" CreationDate="2016-10-13T22:32:28.230" Score="2" Body="&lt;p&gt;Scratch saves temporary files at &lt;code&gt;~/.local/share/scratch-text-editor/unsaved/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-10-13T22:32:28.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8696" PostTypeId="2" ParentId="8167" CreationDate="2016-10-14T02:16:04.957" Score="2" Body="&lt;p&gt;I was running into the exact same issue recently. I found &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1620132&quot; rel=&quot;nofollow&quot;&gt;this bug report&lt;/a&gt; which mentions installing nvidia-370 from ppa:graphics-drivers/ppa. After doing that I'm able to lock and unlock my desktop without screwing up the background - hopefully that helps in your case too!&lt;/p&gt;&#xA;" OwnerUserId="6914" LastActivityDate="2016-10-14T02:16:04.957" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8699" PostTypeId="1" CreationDate="2016-10-14T08:20:11.920" Score="0" ViewCount="1196" Body="&lt;p&gt;I installed eOS Loki and i have notice that there is a weird graphic glitch around the image in photos apps. It only occur when i try to zoom in/out or when i change to another image that doesn't have the same resolution with the image before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop configuration:&#xA;AMD a8-6410,&#xA;AMD Radeon R5 + Radeon HD8570M (Using padoka ppa-happen in stock driver &amp;amp; this PPA),&#xA;8GB DDR3 Ram&lt;a href=&quot;https://i.stack.imgur.com/MNxrk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MNxrk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6916" LastActivityDate="2019-04-12T16:01:50.317" Title="Weird graphical glitch in Photos (apps)" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8700" PostTypeId="2" ParentId="8691" CreationDate="2016-10-14T08:24:14.003" Score="1" Body="&lt;p&gt;In the English (US) version the third item is Lock (and not Block) and it locks the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/m1I0P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m1I0P.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-14T08:24:14.003" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8701" PostTypeId="2" ParentId="8238" CreationDate="2016-10-14T08:54:13.570" Score="0" Body="&lt;p&gt;Check if it's the GNOME keyring as it's probably based in it, and if it's in the startup applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, have you tried to really make the keyring? It's improved security, and it will keep your logins in the keyring.&lt;/p&gt;&#xA;" OwnerUserId="5427" LastActivityDate="2016-10-14T08:54:13.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8702" PostTypeId="2" ParentId="8414" CreationDate="2016-10-14T08:58:14.477" Score="0" Body="&lt;p&gt;First of all, uninstall NVIDIA drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, &lt;code&gt;sudo apt install ubuntu-drivers-common&lt;/code&gt; and open Driver Manager, then select the driver that is detected. They will automatically do the right things to make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, bring some info of your computer it it didn't work.&lt;/p&gt;&#xA;" OwnerUserId="5427" LastActivityDate="2016-10-14T08:58:14.477" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8704" PostTypeId="1" AcceptedAnswerId="8705" CreationDate="2016-10-14T09:20:14.273" Score="0" ViewCount="86" Body="&lt;p&gt;I've run the OS from a USB stick on a laptop I have and it was very sluggish.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The machine has a Core2Duo processor and 1GB of RAM. I've read in other posts here that the processor is up to the job, but that additional RAM would be very beneficial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the fact that I was running the OS from the USB stick going too significantly slow things down? Will it be quicker when properly installed on the internal hard disk?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it realistic to expect a machine of this spec to deliver a smooth user experience with this OS? I could ramp up the RAM to 4GB if that's going to help, or should I stick with Lubuntu, which does work well on this machine, and look to run ElementaryOS on a better specified machine?&lt;/p&gt;&#xA;" OwnerUserId="6918" LastActivityDate="2016-10-14T19:16:16.613" Title="Sensible hardware spec?" Tags="|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8705" PostTypeId="2" ParentId="8704" CreationDate="2016-10-14T09:32:51.230" Score="1" Body="&lt;p&gt;You can run smoothly elementary OS with a Core2Duo with 4 GB of RAM either from an USB stick or from your hard drive. Actually, what makes the real difference is the amount of RAM (so that the OS does not use a lot of swap).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-14T09:32:51.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8706" PostTypeId="2" ParentId="8687" CreationDate="2016-10-14T09:39:39.390" Score="1" Body="&lt;p&gt;No, there is no possibility to do this because this is not something implemented in the source of &lt;code&gt;pantheon-calculator&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can always file a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos&quot; rel=&quot;nofollow&quot;&gt;feature request&lt;/a&gt; or even a &lt;a href=&quot;https://www.bountysource.com/teams/elementary/bounties&quot; rel=&quot;nofollow&quot;&gt;bounty&lt;/a&gt;, but it might not meet the goals of the developers who want to keep things simple.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-14T09:39:39.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8707" PostTypeId="2" ParentId="2012" CreationDate="2016-10-14T13:51:48.710" Score="1" Body="&lt;p&gt;As a complementary info to the other answer - on how to display CPU temperature on the desktop: &lt;strong&gt;conky&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My idea is to use a very simple conky script to show the CPU temperature. And the simplest way to use this program seems to me &lt;strong&gt;Conky Manager&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install conky&#xA;&#xA;sudo apt-add-repository -y ppa:teejee2008/ppa&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install conky-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There are some conky scripts already installed with Conky Manager (located in &lt;code&gt;~/.conky&lt;/code&gt;), which can be launched from Conky Manager, but they don't seem to display the CPU temperature. Many others can be downloaded from &lt;a href=&quot;http://www.teejeetech.in/2013/07/deluxe-conky-theme-pack.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; or from other places like deviantart.com. But for my needs and for the purpose of this answer they seem too bloated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My solution is this: as I was already using one of the conky scripts that come by default with Conky Manager in order to display CPU and RAM memory use, namely &lt;code&gt;~/.conky/TeejeeTech/Process Panel&lt;/code&gt;, I have edited that one to add the CPU temperature.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start Conky Manager, select Process Panel, then click the edit file button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Kny1y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kny1y.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That should open the script in a text editor. At the end of the text, add this line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;${voffset 4}${font}                                  ${acpitemp}°C&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Together with the rest of the script undet the TEXT paragraph, it should give something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/11EeC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/11EeC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, instead, this line can be used, mimicking the default display:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;${color2}CPU ${color2}${alignr}${acpitemp}°C&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/D3uMd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D3uMd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only want the temperature to be displayed and not all the list of applications with info on RAM and CPU use, you may delete all or some of the lines under the TEXT paragraph and keep only the new line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, you may want to add the temperature under the CPU part of the conky along the rest, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All this can be tweaked by changing the lines and their location.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-10-14T13:51:48.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8708" PostTypeId="1" CreationDate="2016-10-14T15:42:18.907" Score="0" ViewCount="112" Body="&lt;p&gt;Hi I am not able to install third party apps, it downloads normally just does not install help me&lt;a href=&quot;https://i.stack.imgur.com/Ids1x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ids1x.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6923" LastActivityDate="2016-10-14T17:12:30.237" Title="Third-party apps not intalam" Tags="|apps|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-14T18:18:18.243" ContentLicense="CC BY-SA 3.0" />
  <row Id="8709" PostTypeId="2" ParentId="8708" CreationDate="2016-10-14T17:12:30.237" Score="0" Body="&lt;p&gt;First open Terminal and visit your Downloads folder by typing:&#xA;&lt;code&gt;cd Downloads&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next you need to depackage(extract) the installed deb files using &lt;code&gt;dpkg&lt;/code&gt; as below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg -i &amp;lt;your-.deb-package-name.deb&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: For your installation type &lt;code&gt;sudo dpkg -i google-chrome-stable_current_amd64.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Repeat for all .deb files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ALTERNATIVELY:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click the .deb file and select Open with &gt; Software Center&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2016-10-14T17:12:30.237" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8710" PostTypeId="2" ParentId="8704" CreationDate="2016-10-14T19:16:16.613" Score="1" Body="&lt;p&gt;For what it's worth, a decent USB flash drive is probably &lt;em&gt;faster&lt;/em&gt; than an old spinning hard drive. Tom's Hardware did a &lt;a href=&quot;http://www.tomshardware.com/reviews/usb-hard-drive,2015.html&quot; rel=&quot;nofollow&quot;&gt;comparison of Flash drives and spinning hard drives&lt;/a&gt; several years ago. Modern flash drives probably perform even better than is shown in this article.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For what it's worth, here are the &lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow&quot;&gt;recommended system specifications&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;  &lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;  &lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;  &lt;li&gt;Internet access&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Things like jerky animations would probably be helped by a faster processor. Switching between apps would probably be helped by more RAM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All that said, a Core 2 Duo should be fine as long as you have some extra RAM. My last computer was running macOS (which is probably heavier than elementary) with a Core 2 Duo processor. Upgrading from 2GB of RAM to 4GB made a huge difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;tl;dr:&lt;/strong&gt; I agree with @lemonslice. :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-10-14T19:16:16.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8712" PostTypeId="2" ParentId="5494" CreationDate="2016-10-14T23:00:41.143" Score="1" Body="&lt;p&gt;yes. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install netatalk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am currently using Pantheon with netatalk for file sharing and Time Machine&lt;/p&gt;&#xA;" OwnerUserId="6926" LastActivityDate="2016-10-14T23:00:41.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8713" PostTypeId="1" CreationDate="2016-10-14T23:26:05.307" Score="1" ViewCount="1045" Body="&lt;p&gt;Realtek RTL8101/2/6E PCI EXPRESS FAST/GIGABIT Ethernet Controller&#xA;Laptop is Hp-r014-tx&lt;/p&gt;&#xA;" OwnerUserId="6927" LastEditorUserId="5565" LastEditDate="2016-10-15T03:13:05.940" LastActivityDate="2019-05-07T19:05:51.113" Title="Realtek RTL8101 Wi-Fi services on Loki (elementary OS 0.4)" Tags="|release-loki|wifi|networking|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8714" PostTypeId="2" ParentId="7160" CreationDate="2016-10-15T01:28:10.340" Score="0" Body="&lt;p&gt;If your keybinding is not working you can try typing in terminal &lt;em&gt;&quot;synclient TouchPadOff=1&quot;&lt;/em&gt; command in order to disable touchpad if you want to enable it back you can type &lt;em&gt;&quot;synclient TouchpadOff=0&quot;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="6564" LastActivityDate="2016-10-15T01:28:10.340" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8715" PostTypeId="2" ParentId="8713" CreationDate="2016-10-15T03:13:14.573" Score="1" Body="&lt;p&gt;If you mean that your network card isn't detected, try installing the Realtek driver &lt;a href=&quot;http://www.realtek.com.tw/DOWNLOADS/downloadsView.aspx?Langid=1&amp;amp;PNid=14&amp;amp;PFid=7&amp;amp;Level=5&amp;amp;Conn=4&amp;amp;DownTypeID=3&amp;amp;GetDown=false&quot; rel=&quot;nofollow noreferrer&quot;&gt;from their website&lt;/a&gt; (&quot;LINUX driver&quot;). If needed, there are install directions &lt;a href=&quot;https://askubuntu.com/q/470609/49899&quot;&gt;at Ask Ubuntu&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-15T03:13:14.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8716" PostTypeId="2" ParentId="8713" CreationDate="2016-10-15T05:21:08.283" Score="0" Body="&lt;p&gt;You're correct I too use these drivers and on one of my HDD's it was out of date seeing it's my backup. On it I had an issue where I refused to detect, the other my main HDD all went smooth, I copied &lt;a href=&quot;http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&amp;amp;PNid=7&amp;amp;PFid=10&amp;amp;Level=3&amp;amp;Conn=2&quot; rel=&quot;nofollow&quot;&gt;the drivers&lt;/a&gt; over from the 2nd HDD and it started working just fine.&lt;/p&gt;&#xA;" OwnerUserId="6884" LastEditorUserId="26" LastEditDate="2016-10-19T00:22:02.523" LastActivityDate="2016-10-19T00:22:02.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8717" PostTypeId="1" CreationDate="2016-10-15T06:32:43.083" Score="2" ViewCount="2158" Body="&lt;p&gt;How do I fix this?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'cdrom://elementary OS 0.4 _Loki_ - Stable amd64 (20160921) xenial Release' does not have a Release file.&#xA;    N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;    N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;    E: Failed to fetch cdrom://elementary OS 0.4 _Loki_ - Stable amd64 (20160921)/dists/xenial/contrib/binary-amd64/Packages  Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs&#xA;    E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6925" LastEditorUserId="5565" LastEditDate="2016-10-15T10:30:45.593" LastActivityDate="2017-03-19T00:03:16.770" Title="&quot;The repository 'cdrom://elementary OS 0.4 _Loki_ - Stable amd64 (20160921) xenial Release' does not have a Release file&quot;" Tags="|release-loki|updates|repositories|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8718" PostTypeId="1" CreationDate="2016-10-15T06:59:31.110" Score="2" ViewCount="888" Body="&lt;p&gt;I am using &lt;code&gt;Foxit Reader&lt;/code&gt; as the default &lt;code&gt;pdf&lt;/code&gt; reader in &lt;code&gt;Elementary os Loki&lt;/code&gt;. Yesterday I updated my system. After installing the &lt;code&gt;Software updates&lt;/code&gt; which are provided by the &lt;code&gt;AppCenter&lt;/code&gt; when I open a &lt;code&gt;pdf&lt;/code&gt; the above error occurs. An image is attached below &lt;a href=&quot;https://i.stack.imgur.com/U9EAL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U9EAL.png&quot; alt=&quot;below&quot;&gt;&lt;/a&gt; . But when I open &lt;code&gt;Foxit Reader&lt;/code&gt; separately and when I drag and drop the &lt;code&gt;pdf&lt;/code&gt; files on it, it works fine. How to fix this so that it is able to open &lt;code&gt;pdf&lt;/code&gt; files just by single clicking, which worked fine before the updating the system. Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="3955" LastActivityDate="2017-01-18T10:06:42.123" Title="unable to open uris or files with this app" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8720" PostTypeId="2" ParentId="8717" CreationDate="2016-10-15T10:36:03.543" Score="3" Body="&lt;p&gt;Did you install &lt;code&gt;cdrom://elementary OS 0.4 _Loki_ - Stable amd64 (20160921)&lt;/code&gt; as a repository? See if it's listed with &lt;code&gt;grep ^ /etc/apt/sources.list /etc/apt/sources.list.d/*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, you want to &lt;a href=&quot;https://askubuntu.com/q/307/49899&quot;&gt;remove it&lt;/a&gt;. If you are attempting to upgrade to Loki, you'll need to do a fresh install from boot (not an upgrade). There are installation directions &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;on the official website&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-15T10:36:03.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8721" PostTypeId="5" CreationDate="2016-10-15T10:54:27.350" Score="0" Body="&lt;p&gt;Accessibility refers to product design that accommodates the needs of people with disabilities. The system settings &lt;a href=&quot;/questions/tagged/switchboard&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;switchboard&amp;#39;&quot; rel=&quot;tag&quot;&gt;switchboard&lt;/a&gt; in elementary OS offers some such accommodations, though external applications can be added for others.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:48.757" LastActivityDate="2016-10-19T00:22:48.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8722" PostTypeId="4" CreationDate="2016-10-15T10:54:27.350" Score="0" Body="for questions about making elementary OS more accessible for users with disabilities, whether through the built-in features of the OS or additions" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:43.360" LastActivityDate="2016-10-19T00:22:43.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8723" PostTypeId="5" CreationDate="2016-10-15T10:56:40.507" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-15T10:56:40.507" LastActivityDate="2016-10-15T10:56:40.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8724" PostTypeId="4" CreationDate="2016-10-15T10:56:40.507" Score="0" Body="the home directory/folder is the &quot;/home&quot; folder off of root that contains user data" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:46.373" LastActivityDate="2016-10-19T00:22:46.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8725" PostTypeId="5" CreationDate="2016-10-15T10:58:32.487" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-15T10:58:32.487" LastActivityDate="2016-10-15T10:58:32.487" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8726" PostTypeId="4" CreationDate="2016-10-15T10:58:32.487" Score="0" Body="the act of hiding all windows to show the desktop" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:28.457" LastActivityDate="2016-10-19T00:22:28.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8727" PostTypeId="5" CreationDate="2016-10-15T11:47:20.587" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-15T11:47:20.587" LastActivityDate="2016-10-15T11:47:20.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8728" PostTypeId="4" CreationDate="2016-10-15T11:47:20.587" Score="0" Body="a popular subscription-based streaming media service, best known for streaming music" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:26.190" LastActivityDate="2016-10-19T00:22:26.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8729" PostTypeId="5" CreationDate="2016-10-15T11:48:38.327" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-15T11:48:38.327" LastActivityDate="2016-10-15T11:48:38.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8730" PostTypeId="4" CreationDate="2016-10-15T11:48:38.327" Score="0" Body="the light behind a computer screen's LCD display that determines the screen's brightness" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:23:12.793" LastActivityDate="2016-10-19T00:23:12.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8731" PostTypeId="5" CreationDate="2016-10-15T11:50:37.197" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2016-10-15T11:50:37.197" LastActivityDate="2016-10-15T11:50:37.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8732" PostTypeId="4" CreationDate="2016-10-15T11:50:37.197" Score="0" Body="the act of copying data for use in case the original is lost or damaged" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T00:22:40.737" LastActivityDate="2016-10-19T00:22:40.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8735" PostTypeId="2" ParentId="8679" CreationDate="2016-10-15T20:11:22.870" Score="1" Body="&lt;p&gt;i use covergloobus in loki and work fine i install it from this deb files &lt;a href=&quot;http://covergloobus.deviantart.com/&quot; rel=&quot;nofollow&quot;&gt;http://covergloobus.deviantart.com/&lt;/a&gt;  i hope to help you...&lt;/p&gt;&#xA;" OwnerUserId="6149" LastActivityDate="2016-10-15T20:11:22.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8737" PostTypeId="2" ParentId="853" CreationDate="2016-10-15T21:59:05.083" Score="0" Body="&lt;p&gt;On Loki, you can change the visibility of various indicators in the wingpanel using dconf.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open dconf Editor and disable the indicators by going to &lt;code&gt;org.pantheon.desktop.wingpanel.indicators.&amp;lt;indicator_name&amp;gt;&lt;/code&gt; and changing the boolean value to false.&lt;/p&gt;&#xA;" OwnerUserId="6937" LastEditorUserId="26" LastEditDate="2016-10-19T00:20:20.957" LastActivityDate="2016-10-19T00:20:20.957" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8738" PostTypeId="1" AcceptedAnswerId="8808" CreationDate="2016-10-15T22:47:11.733" Score="2" ViewCount="5503" Body="&lt;p&gt;I have Asus X555UB with dual-boot OS: Windows 10 and eOS Loki. As an Audio Device i have Intel Corporation Sunrise Point-LP HD Audio (rev 21) (or Realtek ACL256). &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The problem is that microphone does not work, headphones doesn't switch automatically when plugged in and after booting into windows the sound completely vanishes even from speaker. &#xA;This problem also persists in Ubuntu 16.04 LTS as well as in Elementary OS Loki. I have tried many basic solutions such as complete check of all alsamixer &quot;mute&quot; occurrences ,have tried to reinstall :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge alsa-base pulseaudio&#xA;sudo apt-get install alsa-base pulseaudio unity-control-center&#xA;sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pulseaudio -k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;have tried alsa-tools and tried to override different devices with the help of hdajackretask. But nothing have helped. It is one of the most severe bugs i currently have. Please, give me a hint where to find a possible solution at least to fix my microphone. &lt;/p&gt;&#xA;" OwnerUserId="6938" LastEditorUserId="6938" LastEditDate="2016-10-19T13:19:22.253" LastActivityDate="2017-07-31T14:36:44.120" Title="Asus X555UB , Realtek ALC256 no sound" Tags="|release-loki|sound|ubuntu|audio|asus|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8739" PostTypeId="2" ParentId="7280" CreationDate="2016-10-15T23:03:23.703" Score="1" Body="&lt;p&gt;ElementaryOS is in migration (or anything like this) to Wayland and is a long process to begin the default session but you can test it with &lt;code&gt;gala --wayland&lt;/code&gt; in terminal, about Mir and the unity 8 release this don't support another Sessions for now only the Unity and the ubuntu touch&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this answer your question;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry my Bad English XD&lt;/p&gt;&#xA;" OwnerUserId="6525" LastActivityDate="2016-10-15T23:03:23.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8740" PostTypeId="1" CreationDate="2016-10-16T01:12:09.623" Score="0" ViewCount="52" Body="&lt;p&gt;Running Loki and when I click on the Applications menu to reveal all available applications, it is far too wide for my laptop screen and many of the options are off screen. Does anyone know where the width setting for that is so I can reset to something more reasonable?&lt;/p&gt;&#xA;" OwnerUserId="6941" LastActivityDate="2016-10-16T01:24:20.330" Title="The Applications Menu Is Too Wide" Tags="|applications|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-21T20:13:16.797" ContentLicense="CC BY-SA 3.0" />
  <row Id="8741" PostTypeId="2" ParentId="8740" CreationDate="2016-10-16T01:24:20.330" Score="1" Body="&lt;p&gt;Apparently, rebooting fixed it. D'oh&lt;/p&gt;&#xA;" OwnerUserId="6941" LastActivityDate="2016-10-16T01:24:20.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8743" PostTypeId="1" CreationDate="2016-10-16T05:17:31.580" Score="1" ViewCount="5879" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nMUTe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nMUTe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;There isn't any wifi setting, and i am a noob, dont know how to fix it.&lt;/p&gt;&#xA;" OwnerUserId="6944" LastActivityDate="2019-03-14T07:34:01.053" Title="I can't see any wireless setting in loki 0.4. Please help!" Tags="|wifi|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8745" PostTypeId="2" ParentId="7160" CreationDate="2016-10-16T09:03:36.160" Score="8" Body="&lt;p&gt;Do &lt;code&gt;xinput list&lt;/code&gt; to see the &lt;strong&gt;name&lt;/strong&gt; of the touchpad. Let's say it's &lt;strong&gt;&amp;quot;SynPS/2 Synaptics TouchPad&amp;quot;&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WAy1S.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WAy1S.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;(the number after &lt;code&gt;id=&lt;/code&gt; can be used instead of the name of the device, but id may vary between systems and can even be changed after reboot in some cases. Using the name is safer, as the wrong id can disable the keyboard, etc)&lt;/p&gt;&#xA;&lt;p&gt;The command to disable would then be&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xinput set-prop &amp;quot;SynPS/2 Synaptics TouchPad&amp;quot; &amp;quot;Device Enabled&amp;quot; 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Enable:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xinput set-prop &amp;quot;SynPS/2 Synaptics TouchPad&amp;quot; &amp;quot;Device Enabled&amp;quot; 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Change accordingly to YOUR device name.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;These two commands can then be associated with shortcuts under &lt;em&gt;Keyboard &amp;gt; Custom &amp;gt; Add&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vgBTj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vgBTj.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;These two commands can also be run through the Applications launcher:&lt;/p&gt;&#xA;&lt;p&gt;Having Gedit as text editor:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit ~/.local/share/applications/disable_touchpad.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;With the lines:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Disable touchpad&#xA;Comment=Set your touchpad preferences&#xA;Exec= xinput set-prop &amp;quot;SynPS/2 Synaptics TouchPad&amp;quot; &amp;quot;Device Enabled&amp;quot; 0&#xA;Icon=touchpad-disabled&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-GNOME-Settings-Panel;System;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit ~/.local/share/applications/enable_touchpad.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;With the lines:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Enable touchpad&#xA;Comment=Set your mouse and touchpad preferences&#xA;Exec= xinput set-prop &amp;quot;SynPS/2 Synaptics TouchPad&amp;quot; &amp;quot;Device Enabled&amp;quot; 1&#xA;Icon=input-touchpad-symbolic&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-GNOME-Settings-Panel;System;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now, just use the Super-Space launcher and type the first letters of 'touchpad', 'enable' or 'disable'.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TI2Jc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TI2Jc.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once created, those launchers can be accessed in different ways, like added to the dock etc.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-10-25T11:31:49.217" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="8748" PostTypeId="2" ParentId="8743" CreationDate="2016-10-16T11:22:55.360" Score="3" Body="&lt;p&gt;Now, it will be good to provide some troubleshooting info so we are able to help.&#xA;To me it sounds that Loki is trying to load incorrect driver for your wifi hence the issue. &#xA;You need to discover the manufacturer of your &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; card, and discover what driver Loki is trying to load. For example if you have Intel wireless card and Loki is trying to load Acer drivers will result in wifi card blockage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here you go few commands to help us troubleshoot. Please provide output of this commands and/if by issuing this commands your wifi started working. We should be able to take from there if further assistance is necessary:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;iwconfig&lt;/code&gt; - to find your wifi interface name (e.g &lt;em&gt;wlan0&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list all&lt;/code&gt; - to see whether your interface is blocked, hardware block or software block (here you may see different wireless vendor instead of the actual one which indicates and issue)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ifconfig wlan0 up&lt;/code&gt; - trying to bring the interface up&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lspci&lt;/code&gt; - find the hardware manufacturer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lshw -C network&lt;/code&gt; - find the manufacturer of your wifi card&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;nmcli radio wifi on&lt;/code&gt;  - try to bring the interface up&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall NetworkManager &amp;amp;&amp;amp; NetworkManager&lt;/code&gt; - kill existing network manager process&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/init.d/network-manager reload&lt;/code&gt; - reload service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/init.d/networking restart&lt;/code&gt; - reload tcp/ip stack&lt;/p&gt;&#xA;" OwnerUserId="6200" LastEditorUserId="16827" LastEditDate="2019-01-25T05:45:54.043" LastActivityDate="2019-01-25T05:45:54.043" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="8752" PostTypeId="1" CreationDate="2016-10-16T13:31:29.000" Score="0" ViewCount="1015" Body="&lt;p&gt;Screen Just blank when selecting &quot;install elementary os&quot; in EFi mode, when i try to install from bios mode just the white courser is blinking.&lt;/p&gt;&#xA;" OwnerUserId="6952" LastActivityDate="2016-11-28T00:44:13.280" Title="Screen Just blank when selecting &quot;install elementary os&quot;" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8753" PostTypeId="2" ParentId="7545" CreationDate="2016-10-16T14:43:37.367" Score="3" Body="&lt;p&gt;I just posted a solution for another question that might help you for this as well on:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7939/way-to-enable-vertical-two-finger-scrolling-but-not-horizontal/8091#8091&quot;&gt;Way to enable vertical two-finger scrolling, but not horizontal?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I removed the libinput drivers for the touchpad and installed the synaptic drivers instead I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This removes libinput touchpad driver. Then install synaptics:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This also allowed me to change Two Finger Horizontal scrolling and add palm detection (see above link) and also made the touchpad less sensitive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested this extensively, but seems to work so far, use at your own risk. You could always remove the synaptics packages and reinstall the libinput ones if needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-20T10:34:08.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8754" PostTypeId="2" ParentId="7034" CreationDate="2016-10-16T14:47:07.957" Score="0" Body="&lt;p&gt;I just posted a solution for another question that might help you for this as well on:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Way to enable vertical two-finger scrolling, but not horizontal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I removed the libinput drivers for the touchpad and installed the synaptic drivers instead I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This removes libinput touchpad driver. Then install synaptics:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This also allowed me to change Two Finger Horizontal scrolling and add palm detection (see above link) and also made the touchpad less sensitive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested this extensively, but seems to work so far, use at your own risk. You could always remove the synaptics packages and reinstall the libinput ones if needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2016-10-16T14:47:07.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8756" PostTypeId="2" ParentId="7447" CreationDate="2016-10-16T17:43:01.980" Score="8" Body="&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: Should be &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1617687&quot; rel=&quot;nofollow noreferrer&quot;&gt;fixed in the AppCenter 1.2 update&lt;/a&gt;, but try the following if it persists:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I haven't had this issue since I disabled the AppCenter from running in the background.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To kill AppCenter in your current session, run &lt;code&gt;killall appcenter&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To disable AppCenter at startup, see &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8629/5565&quot;&gt;Disable AppCenter dock reminder&lt;/a&gt;—there is a &lt;code&gt;terminal&lt;/code&gt; way and a &lt;code&gt;gnome-session-properties&lt;/code&gt; way.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-30T06:28:55.437" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8757" PostTypeId="1" CreationDate="2016-10-16T18:02:47.500" Score="4" ViewCount="1980" Body="&lt;p&gt;Loki 0.4 64-bit. Is it possible to assign a keyboard shortcut to force the dock to appear even when a focused window overlaps it?&lt;/p&gt;&#xA;" OwnerUserId="6957" LastActivityDate="2017-03-23T17:02:35.177" Title="keyboard shortcut to force dock to appear" Tags="|release-loki|plank|keyboard-shortcuts|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8758" PostTypeId="2" ParentId="2508" CreationDate="2016-10-16T19:12:49.210" Score="0" Body="&lt;p&gt;I can help you get rid of the haunting error. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remove the line referencing &lt;code&gt;/etc/apt/apt.conf.d/99theme-patcher&lt;/code&gt; in &#xA;&lt;code&gt;/var/lib/dpkg/info/elementary-tweaks.list&lt;/code&gt;. And then delete the &lt;code&gt;/etc/apt/apt.conf.d/99theme-patcher&lt;/code&gt; file itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's probably not a perfect solution, maybe the &lt;code&gt;/var/lib/dpkg/info/elementary-tweaks.list&lt;/code&gt; file should go away entirely, but I have installed a new version of elementary-tweaks and I don't want to break that one.&lt;/p&gt;&#xA;" OwnerUserId="6940" LastActivityDate="2016-10-16T19:12:49.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8759" PostTypeId="2" ParentId="6864" CreationDate="2016-10-16T19:50:27.427" Score="1" Body="&lt;p&gt;You can try with unicode:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pressing first Shift+Ctrl+U&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Á&#xA;U+00C1&#xA;É&#xA;U+00C9&#xA;Í&#xA;U+00CD&#xA;Ó&#xA;U+00D3&#xA;Ú&#xA;U+00DA&#xA;á&#xA;U+00E1&#xA;é&#xA;U+00E9&#xA;í&#xA;U+00ED&#xA;ó&#xA;U+00F3&#xA;ú&#xA;U+00FA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More help:&#xA;&lt;a href=&quot;http://www.ltool.net/characters_to_unicode_charts_in_spanish.php?unicode=1&amp;amp;nowpage=2&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.ltool.net/characters_to_unicode_charts_in_spanish.php?unicode=1&amp;amp;nowpage=2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There os also another related question that can help you:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4961/how-to-insert-characters-by-pressing-alt-numpad&quot;&gt;How to insert characters by pressing ALT + # (numpad)?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope it works but haven't tried myself in a password field.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-16T20:55:27.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8762" PostTypeId="1" CreationDate="2016-10-16T23:20:46.737" Score="1" ViewCount="288" Body="&lt;p&gt;I am looking for a dark theme for Elementary OS Loki. I couldn't find anything better than the default theme with dark variant, but it has one problem: when I switch to categorized app view in menu, the categories are displayed with grey font, and they are barely visible. Is there any way I can change this font colour? I tried looking in &lt;code&gt;/usr/share/themes/elementary/gtk-3.0&lt;/code&gt; without any luck so far. Also, if You know any good dark theme, I'd be glad to know.&lt;/p&gt;&#xA;" OwnerUserId="6960" LastActivityDate="2016-10-16T23:20:46.737" Title="Change font colour on dark variant of Elementary theme" Tags="|release-loki|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8763" PostTypeId="2" ParentId="2801" CreationDate="2016-10-16T23:46:35.427" Score="1" Body="&lt;p&gt;Had exactly the same problem. When You type &lt;code&gt;xinput&lt;/code&gt; You can notice, that your touchpad is now recognized as PS2 mouse. Try to reinstall the driver, it should fix this. Just check if you need Elantech/Synaptic/etc driver, remove it with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge &amp;lt;your driver package&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And reinstall it with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install &amp;lt;your driver package&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6960" LastActivityDate="2016-10-16T23:46:35.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8764" PostTypeId="1" AcceptedAnswerId="8773" CreationDate="2016-10-17T03:08:07.450" Score="2" ViewCount="873" Body="&lt;p&gt;I try to set icons for programs and context menus by dconf under org&gt;gnome&gt;desktop&gt;interface&gt;menus-have-icons but didn't work, help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Expected results:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q6dko.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q6dko.png&quot; alt=&quot;menus-have-icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(in Freya I think I got this using Ubuntu-Tweak)&lt;/p&gt;&#xA;" OwnerUserId="6962" LastEditorUserId="45" LastEditDate="2017-01-14T19:50:34.897" LastActivityDate="2017-01-14T19:50:34.897" Title="How can I get menus with icons in Loki?" Tags="|release-loki|icons|menu|user-interface|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8765" PostTypeId="1" CreationDate="2016-10-17T04:39:15.350" Score="0" ViewCount="1056" Body="&lt;p&gt;I'm has Insall and config Ibus-unikey&lt;a href=&quot;https://i.stack.imgur.com/3ag8J.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3ag8J.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And change type Unikey :&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MW9ws.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MW9ws.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm can't type vietnamese, please help me!!!!!!&lt;/p&gt;&#xA;" OwnerUserId="6963" LastActivityDate="2016-12-22T14:43:11.363" Title="Ibus-unikey not work" Tags="|ibus|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8766" PostTypeId="1" AcceptedAnswerId="8769" CreationDate="2016-10-17T12:37:06.007" Score="1" ViewCount="4028" Body="&lt;p&gt;How I can remove the mail client from Elementary OS Loki 0.4 through command line? I don't need it but can't uninstall it in the Application Center as it freezes.&lt;/p&gt;&#xA;" OwnerUserId="6969" LastEditorUserId="5565" LastEditDate="2016-10-17T14:03:43.080" LastActivityDate="2016-10-17T14:03:43.080" Title="How to remove mail client from Elementary OS Loki 0.4" Tags="|software-installation|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8767" PostTypeId="2" ParentId="8766" CreationDate="2016-10-17T13:16:19.927" Score="1" Body="&lt;p&gt;Just use included App Center, in updates tab, find &quot;Mail&quot;, choose &quot;Uninstall&quot; and enter password. After that mail will be removed from Your PC&lt;/p&gt;&#xA;" OwnerUserId="6960" LastActivityDate="2016-10-17T13:16:19.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8768" PostTypeId="1" CreationDate="2016-10-17T13:58:11.803" Score="2" ViewCount="878" Body="&lt;p&gt;Is there a way to change the spell checking language in Pantheon Mail from English to German (or any other language for other users)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, is there a way to disable spell checking for Pantheon Mail?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's really hard to write a mail if all words have a red line underneath.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="4071" LastEditorUserId="5565" LastEditDate="2016-10-17T20:47:18.543" LastActivityDate="2016-10-17T20:49:29.697" Title="Change (or disable) spell checker language in Pantheon Mail" Tags="|pantheon-mail|settings|language|internationalization|" AnswerCount="1" CommentCount="0" ClosedDate="2016-10-21T20:09:55.877" ContentLicense="CC BY-SA 3.0" />
  <row Id="8769" PostTypeId="2" ParentId="8766" CreationDate="2016-10-17T13:59:27.677" Score="6" Body="&lt;p&gt;AppCenter is still in development so it can be buggy. In Terminal, use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-17T13:59:27.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8770" PostTypeId="2" ParentId="8024" CreationDate="2016-10-17T19:14:10.267" Score="3" Body="&lt;p&gt;This is a &lt;strong&gt;bug&lt;/strong&gt;. Please &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1547949&quot; rel=&quot;nofollow&quot;&gt;subscribe to its ticket&lt;/a&gt; in the bug tracker to receive notifications when the devs need help testing a fix.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-17T19:14:10.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8772" PostTypeId="2" ParentId="8768" CreationDate="2016-10-17T20:49:29.697" Score="2" Body="&lt;p&gt;In short, there should be. Elementary's Mail is based on Geary, which &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-June/msg01793.html&quot; rel=&quot;nofollow&quot;&gt;added support&lt;/a&gt; for changing spell check dictionaries in June 2016. The feature does not appear to have been ported to the elementary version. As an alternative, you can install and use Geary until elementary addresses the issue (&lt;code&gt;sudo apt install geary&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I opened &lt;strong&gt;&lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1634257&quot; rel=&quot;nofollow&quot;&gt;a feature request&lt;/a&gt;&lt;/strong&gt; for the spell check dictionaries. Please subscribe to the ticket so you can help the devs test a fix, if one comes.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-17T20:49:29.697" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8773" PostTypeId="2" ParentId="8764" CreationDate="2016-10-17T21:02:56.650" Score="2" Body="&lt;p&gt;Full explanation &lt;a href=&quot;https://ask.fedoraproject.org/en/question/23116/how-to-fix-missing-icons-in-program-menus-and-context-menus/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What concern us: setting this via &lt;code&gt;org.gnome.desktop.interface&lt;/code&gt; does not work because &lt;code&gt;menus-have-icons&lt;/code&gt; (and &lt;code&gt;buttons-have-icons&lt;/code&gt;) is deprecated, but it's still possible to set this parameter by adding: &lt;code&gt;, 'Gtk/MenuImages': &amp;lt;1&amp;gt;&lt;/code&gt; to &lt;strong&gt;&quot;overrides&quot;&lt;/strong&gt; key in &lt;code&gt;org.gnome.settings-daemon.plugins.xsettings&lt;/code&gt; (with a comma and a space before, because in eOS this key is not empty)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GfUEd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GfUEd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and voilà:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kxP9F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kxP9F.png&quot; alt=&quot;happy icons in nemo&amp;#39;s context menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6962" LastEditorDisplayName="user170" LastEditDate="2017-01-13T16:57:58.653" LastActivityDate="2017-01-13T16:57:58.653" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8774" PostTypeId="2" ParentId="8594" CreationDate="2016-10-17T23:30:25.443" Score="1" Body="&lt;p&gt;You can install OBS Studio using:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ffmpeg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:obsproject/obs-studio&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install obs-studio&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Version: 0.15.2&#xA;Released: July 15th, 2016&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Official Site: &lt;a href=&quot;https://obsproject.com&quot; rel=&quot;nofollow&quot;&gt;https://obsproject.com&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2016-10-17T23:30:25.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8775" PostTypeId="1" CreationDate="2016-10-18T02:25:54.643" Score="1" ViewCount="10408" Body="&lt;p&gt;I have been searching for a long time and a lot of people stated to go to appearance and windows cursor, but when I installed tweak tool I can't seem to find any of the &quot;windows cursor&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xcq2X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xcq2X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help ASAP.&lt;/p&gt;&#xA;" OwnerUserId="6978" LastActivityDate="2016-10-18T03:13:56.660" Title="How to put minimize and maximize button in elementary os loki" Tags="|release-loki|elementary-project|minimize|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-21T20:10:37.230" ContentLicense="CC BY-SA 3.0" />
  <row Id="8776" PostTypeId="1" AcceptedAnswerId="8845" CreationDate="2016-10-18T03:02:38.417" Score="0" ViewCount="56" Body="&lt;p&gt;I compiled and installed vim 8 using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./configure --prefix=/usr/local \&#xA;            --with-features=huge \&#xA;            --enable-fail-if-missing \&#xA;            --enable-multibyte \&#xA;            --enable-rubyinterp \&#xA;            --enable-pythoninterp \&#xA;            --with-python-config-dir=/usr/lib/python2.7/config-x86_64-linux-gnu\&#xA;            --enable-python3interp \&#xA;            --with-python3-config-dir=/usr/lib/python3.5/config-3.5m-x86_64-linux-gnu \&#xA;            --enable-perlinterp \&#xA;            --enable-luainterp \&#xA;            --enable-gui=auto \&#xA;            --enable-fontset \&#xA;            --enable-cscope | tee configure.log&#xA;&#xA;make VIMRUNTIMEDIR=/usr/local/share/vim/vim80&#xA;&#xA;checkinstall --default&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it works. I can use gvim and I check the version and everything looked fine for a couple of days. Then suddenly, I can no longer find gvim, only terminal vim and the version seems to have been downgraded to 7.4.1689.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This has happened several times but I'm unable to figure out what is triggering this. Can someone please shed some light on this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Updating the system seems to be the issue. This happens after every system update.&lt;/p&gt;&#xA;" OwnerUserId="6253" LastEditorUserId="6253" LastEditDate="2016-10-20T06:16:34.647" LastActivityDate="2016-10-22T16:00:56.300" Title="EOS updates causes compiled gvim to get replaced with vim from packages" Tags="|applications|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T22:07:10.703" ContentLicense="CC BY-SA 3.0" />
  <row Id="8777" PostTypeId="2" ParentId="8775" CreationDate="2016-10-18T03:13:56.660" Score="2" Body="&lt;p&gt;You need to install elementary-Tweaks instead Gnome Tweak Tool, but maybe you can find that setting under the 'Windows' tab in the Tweak Tool. If not:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First run in a terminal this commands (you need to install &lt;code&gt;software-properties-common&lt;/code&gt; to be able to add repositories):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common &amp;amp;&amp;amp; &#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp;&#xA;sudo apt-get update &amp;amp;&amp;amp;&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, open system settings and select Tweaks, under the first panel you'll find the option to modify the window controls layout:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MSbGJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MSbGJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6962" LastActivityDate="2016-10-18T03:13:56.660" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8778" PostTypeId="1" AcceptedAnswerId="8795" CreationDate="2016-10-18T04:43:42.533" Score="0" ViewCount="84" Body="&lt;p&gt;I have recently installed 0.4, Loki, on my laptop that has a touchpad. Previously I was using version 0., Freya, and I was happy enough with it and I thought I would have basically the same user experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, among a few other problems, one &quot;feature&quot; I am finding frustrating is that it seems that scrolling works differently. I'm not sure the term for this behaviour, and I'm sorry if my description is lacking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I open a text file, and I scroll down, when I take my finger off the touchpad, the document will keep moving. How fast I am scrolling determines how fast it keeps scrolling. It's as if I can &quot;flick&quot; the scrolling behaviour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To be blunt, I hate this behaviour. I scroll down to a particular part of the text, take my finger off the touchpad, and then the text keeps moving so that I have to adjust my position again... and then it moves again...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want it so that when I take my finger off the touchpad, scrolling comes to a complete stop. There should be absolutely no motion unless I am actively moving things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get this behaviour in Loki?&lt;/p&gt;&#xA;" OwnerUserId="2827" LastActivityDate="2016-10-18T21:49:57.687" Title="How do I stop scrolling from happening when I take my finger off the touchpad?" Tags="|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8780" PostTypeId="1" CreationDate="2016-10-18T08:48:12.683" Score="1" ViewCount="142" Body="&lt;p&gt;connettendomi via FTP to a remote server using Pantheon files, clicking the right button I display the &quot;New&quot; to create files and folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to solve?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="6917" LastActivityDate="2016-10-18T08:48:12.683" Title="Phanteon FTP connection not create file and folder" Tags="|release-loki|pantheon-files|" AnswerCount="0" CommentCount="2" ClosedDate="2016-11-23T11:29:53.963" ContentLicense="CC BY-SA 3.0" />
  <row Id="8782" PostTypeId="1" CreationDate="2016-10-18T09:36:01.730" Score="1" ViewCount="53" Body="&lt;p&gt;I changed the password in the admin functions, I restart the Laptop and when I want to log in&#xA;I write the password and enter → the display turns black for one second and the field for password is almost clear&#xA;When I make a wrong password the button shakes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards, Anne from germany&lt;/p&gt;&#xA;" OwnerUserId="6987" LastEditorUserId="578" LastEditDate="2016-10-19T00:22:31.030" LastActivityDate="2017-02-16T05:02:52.510" Title="After change Admin-PW I can't log in anymore" Tags="|greeter|security|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8783" PostTypeId="2" ParentId="8782" CreationDate="2016-10-18T09:50:49.060" Score="1" Body="&lt;p&gt;The screen shakes if the password is not O.k.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it is almost sure that you don't type the good password. This might be a typo or you might not have the same keyboard setting (e.g., German vs. US English) in the Settings panel and in the Login screen.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-18T09:50:49.060" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8784" PostTypeId="1" CreationDate="2016-10-18T10:03:33.037" Score="1" ViewCount="126" Body="&lt;p&gt;every time I turn on my pc and I open slingshot, the last application is marked as selected on subsequent aprture everything is normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's nothing serious but it is quite annoying, you know what can be the cause?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;a href=&quot;https://i.stack.imgur.com/kjwaD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kjwaD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6917" LastActivityDate="2016-10-18T10:03:33.037" Title="First open Slingshot" Tags="|release-loki|slingshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8786" PostTypeId="1" CreationDate="2016-10-18T14:06:21.100" Score="2" ViewCount="573" Body="&lt;p&gt;I'm struggling to get VMWare Workstation 12.5 to enable 3D support for guest Windows VMs.&#xA;Currently I see an error telling me I need to update my drivers.&#xA;Google has suggested using a drivers utility in system settings but I don't have that panel in Loki.&#xA;I'm using Intel Corporation Broadwell U Integrated Graphics (rev09) and it would appear that the new Intel driver update utility for Ubuntu doesnt work with Elementary OS.&#xA;Any advice appreciated!&#xA;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="6993" LastActivityDate="2019-05-07T22:02:00.450" Title="Loki OpenGL issue with VMWare Workstation 12.5" Tags="|drivers|graphics|intel|virtualization|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8787" PostTypeId="1" CreationDate="2016-10-18T16:05:43.517" Score="1" ViewCount="87" Body="&lt;p&gt;i've seen that Music application search a specific music in using the Album. (in the expression)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, it's possible to search a music by the title ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx for read this post. &lt;/p&gt;&#xA;" OwnerUserId="6994" LastActivityDate="2016-12-20T12:56:01.737" Title="Regex used by Music Application" Tags="|release-loki|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8788" PostTypeId="1" CreationDate="2016-10-18T16:21:47.463" Score="0" ViewCount="837" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eNsQN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eNsQN.png&quot; alt=&quot;always this lock message &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aUXCe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aUXCe.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sometimes appear a update alert icon on top right beside the wifi icon, but i can't update because this lock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;by the way, first I ran the shell command, after this, I tried the update software&lt;/p&gt;&#xA;" OwnerUserId="6995" LastActivityDate="2016-10-18T17:11:13.357" Title="Error update &quot; Could not get lock /var/lib/dpkg/lock&quot;" Tags="|updates|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8789" PostTypeId="2" ParentId="8786" CreationDate="2016-10-18T16:48:22.623" Score="1" Body="&lt;p&gt;Virtual machines aren't well supported on elementary OS, but you should be able to install Intel drivers at least. I'm not sure what errors you received that you couldn't do the install on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the drivers utility, I think you want:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-18T16:48:22.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8790" PostTypeId="2" ParentId="8788" CreationDate="2016-10-18T17:11:13.357" Score="2" Body="&lt;p&gt;This could be a problem with broken dependencies. If you've added PPAs or other third-party software sources, various dependencies might be conflicting with one another.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try running &lt;code&gt;sudo apt-get install -f&lt;/code&gt;, which will attempt to fix the dependencies. (&lt;a href=&quot;https://askubuntu.com/a/402560/486628&quot;&gt;Source&lt;/a&gt;) If that doesn't work, &lt;a href=&quot;https://askubuntu.com/questions/15433/unable-to-lock-the-administration-directory-var-lib-dpkg-is-another-process#102084&quot;&gt;this Ask Ubuntu question&lt;/a&gt; has additional steps you could take.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All that said, now might be a good time to do a clean install of Loki, the latest version of elementary. (It looks like you're on Freya.) You'll need to do a clean install to get the latest version anyway, and setting your applications back up might be easier than trying to resolve the dependency problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A fresh install will get you back to the default software sources. Loki also replaces the Ubuntu software update tools with elementary's new AppCenter, which I've found to be simpler and more reliable.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-18T17:11:13.357" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8791" PostTypeId="1" CreationDate="2016-10-18T17:30:36.673" Score="0" ViewCount="1123" Body="&lt;p&gt;I purchased an Sapphire Radeon RX 460 card for my Loki machine, installed it and booted. I can log in fine but my machine does not detect my dual displays, one currently mirrors the other one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install the AMDGPU-PRO drivers, got the unsupported OS error, changed all of my system information to look like a vanilla Ubuntu machine, the successfully installed the drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After rebooting I get dual blackscreens except for my mouse pointer. Then I uninstalled the AMDGPU-PRO drivers and I'm back to my 1 monitor problem. I've tried installing the oibaf drivers but that didn't fix the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I check &lt;em&gt;software-properties-gtk&lt;/em&gt; I get &quot;no proprietary drivers in use&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;lspci&lt;/em&gt; shows the following entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67ef (rev cf)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1:&lt;/strong&gt; I've since put my nvidia card back in but I'd like to get the AMD card working if possible since it's such a newer card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did notice in the &quot;additional drivers&quot; section no drivers show up except for &quot;intel microcode&quot; whereas when I have the nvidia card in it shows the nouveau driver and possible Nvidia branded drivers themselves. Is this normal for AMD cards?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2:&lt;/strong&gt; Is no one using an AMD video card on Loki or Ubuntu 16.04?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 3:&lt;/strong&gt; Below is &lt;em&gt;xrandr --verbose&lt;/em&gt; output if that gives more helpful information:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr: Failed to get size of gamma for output default&#xA;Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080&#xA;default connected primary 1920x1080+0+0 (0x274) normal (normal) 0mm x 0mm&#xA;Identifier: 0x273&#xA;Timestamp:  73741&#xA;Subpixel:   unknown&#xA;Clones:    &#xA;CRTC:       0&#xA;CRTCs:      0&#xA;Transform:  1.000000 0.000000 0.000000&#xA;            0.000000 1.000000 0.000000&#xA;            0.000000 0.000000 1.000000&#xA;           filter: &#xA;_MUTTER_PRESENTATION_OUTPUT: 0 &#xA;1920x1080 (0x274) 159.667MHz *current&#xA;    h: width  1920 start    0 end    0 total 1920 skew    0 clock  83.16KHz&#xA;    v: height 1080 start    0 end    0 total 1080           clock  77.00Hz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="573" LastEditorUserId="573" LastEditDate="2016-10-26T18:16:57.190" LastActivityDate="2017-02-09T17:48:02.817" Title="Loki: AMDGPU-PRO drivers black screen my machine" Tags="|release-loki|graphic-drivers|amd|radeon|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8793" PostTypeId="1" CreationDate="2016-10-18T18:40:32.000" Score="0" ViewCount="147" Body="&lt;p&gt;I have this problem: I can't succeed in installing kdeconnect and kdenlive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get error 403 forbidden all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my output from terminal: &lt;a href=&quot;http://pastebin.com/raw/6HFzfMVu&quot; rel=&quot;nofollow&quot;&gt;http://pastebin.com/raw/6HFzfMVu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else had this error? I tried cleaning cache packages, --fix-missing, updating repos etc. but with no success. I also tried adding kdenlive repo but still get the same error. Works for other software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for reading!&lt;/p&gt;&#xA;" OwnerUserId="6999" LastActivityDate="2017-01-16T23:41:41.280" Title="Can't install kdenlive and kdeconnect, 403 forbidden" Tags="|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8794" PostTypeId="2" ParentId="8793" CreationDate="2016-10-18T21:37:39.993" Score="1" Body="&lt;p&gt;From the output, it looks like you are trying to download packages from the &lt;code&gt;universe&lt;/code&gt; repository. This repository is maintained by Ubuntu community members and not by Canonical. &lt;strong&gt;It's not reviewed by the Ubuntu security team either, so proceed at your own risk.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;403&lt;/code&gt; error can sometimes mean that the resource is no longer available, such as when a mirror gets taken down (either permanently or temporarily for maintenance). You might want to consider just waiting and seeing if the server comes back online in a few hours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like URLs without the &lt;code&gt;ba&lt;/code&gt; prefix do currently resolve. So you might want to consider either manually downloading the packages using your web browser or changing your sources list (&lt;code&gt;etc/apt/sources.list&lt;/code&gt;) to a working mirror.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-10-18T21:37:39.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8795" PostTypeId="2" ParentId="8778" CreationDate="2016-10-18T21:49:57.687" Score="1" Body="&lt;p&gt;This is called Kinetic scrolling and it's a toolkit feature. It cannot be disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However you can avoid it by bringing your fingers to a complete stop before you remove them from the trackpad. Kinetic scrolling only happens when you make a flicking gesture.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-10-18T21:49:57.687" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8796" PostTypeId="2" ParentId="8793" CreationDate="2016-10-18T21:57:49.180" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/308348/49899&quot;&gt;Looks like a server issue.&lt;/a&gt; Try using another country's repositories?&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install software-properties-gtk&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open &quot;Software &amp;amp; Updates&quot; in the Applications menu&lt;/li&gt;&#xA;&lt;li&gt;Choose country server from the dropdown menu&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-18T21:57:49.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8797" PostTypeId="2" ParentId="8055" CreationDate="2016-10-18T21:58:04.053" Score="2" Body="&lt;p&gt;It depends on what you mean by &quot;customize&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I can tell, the authors of those replacement panel projects have stopped development, so you probably won't be able to replace your panel with those dead projects.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wingpanel still uses the &lt;code&gt;panel&lt;/code&gt; css class and includes some new classes like &lt;code&gt;maximized&lt;/code&gt; and &lt;code&gt;translucent&lt;/code&gt;, so all of it's color changes are now handled in CSS and not hard-coded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As always, all of the indicators are extensions for the panel and none of them are mandatory or hard-coded.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-10-18T21:58:04.053" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8798" PostTypeId="2" ParentId="2623" CreationDate="2016-10-18T22:00:57.103" Score="0" Body="&lt;p&gt;Gtk+ does not support non-integer scaling factors. It is not possible to set your scaling factor to a non-integer value.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-10-18T22:00:57.103" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8799" PostTypeId="2" ParentId="6652" CreationDate="2016-10-19T00:01:46.737" Score="1" Body="&lt;p&gt;I've reproduced this, so it is likely a &lt;strong&gt;bug&lt;/strong&gt;. You can track its status at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1634688&quot; rel=&quot;nofollow&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1634688&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please subscribe to the ticket in case the devs need more information or help testing a fix.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-19T00:01:46.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8800" PostTypeId="2" ParentId="8414" CreationDate="2016-10-19T00:09:46.243" Score="0" Body="&lt;p&gt;Could just be a driver issue—361 is old. Try using &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8329/5565&quot;&gt;the latest Nvidia drivers&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of today, &lt;a href=&quot;http://www.nvidia.com/download/driverResults.aspx/108586/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;Nvidia's website says&lt;/a&gt; that 367.57 is the recommended driver, but I'd just use 370.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;In menus, you can click on &quot;Applications&quot; in the upper-left corner of your screen and type to search for &quot;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/4392/5565&quot;&gt;Software &amp;amp; Updates&lt;/a&gt;&quot;. You can install proprietary drivers in its &quot;Additional drivers&quot; tab.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1nYeH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1nYeH.png&quot; alt=&quot;SOftware &amp;amp; updates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;For more control/specificity, install via the command line: ...&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;...&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;     sudo apt-get update&#xA;     sudo apt install nvidia-###&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;(If you Tab twice after typing &quot;nvidia-&quot; in the above command, Terminal will list all possible packages with that prefix.)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8329/5565&quot;&gt;the rest of my directions&lt;/a&gt; for more depth.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-19T00:09:46.243" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8801" PostTypeId="2" ParentId="8238" CreationDate="2016-10-19T00:34:31.093" Score="2" Body="&lt;p&gt;Okay! After some heavy digging,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;First, update Chrome (&lt;code&gt;⋮ in upper-right corner &amp;gt; Help &amp;gt; About Google Chrome&lt;/code&gt;)—a fix has already been submitted but it did not fix all issues. Then subscribe to &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=643189&quot; rel=&quot;nofollow noreferrer&quot;&gt;the bug report&lt;/a&gt; and report your issue so the devs know they can ask for your help testing a potential fix.&lt;/li&gt;&#xA;&lt;li&gt;If the update doesn't fix it, try running Chrome with the &lt;code&gt;--password-store=basic&lt;/code&gt; flag: &lt;br&gt;&#xA;&lt;code&gt;google-chrome-stable --password-store=basic&lt;/code&gt;&lt;br&gt;&#xA;If you want to set your Chrome icon to run this command, see &lt;a href=&quot;https://askubuntu.com/questions/117341/how-can-i-find-desktop-files&quot;&gt;this answer&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, you're looking at playing around with your keyrings, which are in &lt;code&gt;~/.local/share/keyrings&lt;/code&gt;. But I'd sooner recommend that you follow the latest alternative advice in the &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=643189&quot; rel=&quot;nofollow noreferrer&quot;&gt;the bug report&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-10-20T15:17:12.623" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8802" PostTypeId="2" ParentId="2623" CreationDate="2016-10-19T00:48:47.457" Score="1" Body="&lt;p&gt;I'm on a 13&quot; full HD display and had the same problem. I've scaled up the text a bit using the GUI, which has avoided the problems that you described.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open System Settings.&lt;/li&gt;&#xA;&lt;li&gt;Click Universal Access.&lt;/li&gt;&#xA;&lt;li&gt;Click &quot;display&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Under &quot;reading&quot;, change the text size to &quot;Large&quot; or &quot;Larger.&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I've also changed my dock size from &quot;normal&quot; to &quot;large.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cross-platform apps often ignore these settings, but many have their own scale settings, and they can often be set to non-integer values. For example, &lt;a href=&quot;https://fedoramagazine.org/how-to-get-firefox-looking-right-on-a-high-dpi-display-and-fedora/&quot; rel=&quot;nofollow&quot;&gt;here's how to change the scale factor in Firefox&lt;/a&gt;. In Atom, I use &lt;a href=&quot;https://github.com/atom/atom/issues/2530#issuecomment-241940770&quot; rel=&quot;nofollow&quot;&gt;these user styles&lt;/a&gt; to bump up the text to a comfortable size.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-10-19T00:48:47.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8803" PostTypeId="1" CreationDate="2016-10-19T01:19:24.473" Score="1" ViewCount="57" Body="&lt;p&gt;Photos either crashes or does nothing when I click on a video. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;What is the expected behavior?&lt;/li&gt;&#xA;&lt;li&gt;Should some sort of thumbnail of the video be shown, like I would see in Files? (Just also curious about this..)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4126" LastEditorUserId="4584" LastEditDate="2017-07-26T14:09:43.277" LastActivityDate="2017-07-26T14:09:43.277" Title="Clicking on a video in my Photos library may crash the Photos app or does nothing" Tags="|release-loki|photos|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8804" PostTypeId="2" ParentId="2650" CreationDate="2016-10-19T01:20:33.190" Score="4" Body="&lt;p&gt;I don't use bluetooth so I can't test, but I &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/989817&quot; rel=&quot;nofollow noreferrer&quot;&gt;found&lt;/a&gt; something that should work:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;When your device is connected, it &lt;a href=&quot;https://askubuntu.com/q/554053/49899&quot;&gt;should be&lt;/a&gt; listed in &lt;code&gt;/var/lib/bluetooth&lt;/code&gt; by its MAC address. In that MAC address folder should be a &lt;code&gt;config&lt;/code&gt; file. Edit the line that starts with &lt;code&gt;name&lt;/code&gt; to the name you'd like.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart bluetooth: &lt;code&gt;sudo service bluetooth restart&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I believe this would be the same method to change your local bluetooth broadcast name, but you might need to &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/unity-control-center/+bug/1308922/comments/6&quot; rel=&quot;nofollow noreferrer&quot;&gt;change another conf file&lt;/a&gt; too&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-19T01:20:33.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8806" PostTypeId="1" CreationDate="2016-10-19T04:15:23.520" Score="0" ViewCount="1665" Body="&lt;p&gt;Have tried everything. VLC no longer opens via GUI. Once I did get the dvd to play in VLC by opening it from terminal. I can only open from terminal now. This is what it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gabriel@gabriel-SVE1511RFXB:~$ vlc&#xA;VLC media player 2.2.2 Weatherwax (revision 2.2.2-0-g6259d80)&#xA;[0000000000732148] core libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(vlc:20300): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(vlc:20300): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(vlc:20300): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(vlc:20300): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;libdvdnav: Using dvdnav version 5.0.3&#xA;libdvdread: Could not open /dev/sr0 with libdvdcss.&#xA;libdvdread: Can't open /dev/sr0 for reading&#xA;libdvdnav: vm: failed to open/read the DVD&#xA;libdvdread: Could not open /dev/sr0 with libdvdcss.&#xA;libdvdread: Can't open /dev/sr0 for reading&#xA;[00007f53c4000e98] dvdread demux error: DVDRead cannot open source: /dev/sr0&#xA;[00007f53dc0009b8] core input error: open of `dvd:///dev/sr0' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7002" LastEditorUserId="5565" LastEditDate="2016-10-19T04:51:10.270" LastActivityDate="2016-11-20T01:36:40.247" Title="I cannot play a DVD in any video player" Tags="|videos|vlc|dvd|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8807" PostTypeId="1" CreationDate="2016-10-19T08:33:34.173" Score="1" ViewCount="3498" Body="&lt;p&gt;Whenever I open Steam, it shows me this :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Steam needs to install these additional packages:&#xA;libgl1-mesa-dri:i386, libgl1-mesa-glx:i386, libc6:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, after I press Return, it shows me this :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package libc6:i386 is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;However the following packages replace it:&#xA;  initscripts libc6 tzdata&#xA;&#xA;Package libgl1-mesa-glx:i386 is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;Package libgl1-mesa-dri:i386 is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;However the following packages replace it:&#xA;  libgl1-mesa-dri&#xA;&#xA;N: Ignoring file 'playonlinux.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'steam.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'webupd8team-ubuntu-java-xenial.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'otto-kesselgulasch-ubuntu-gimp-xenial.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'patches.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'nathan-renniewaldock-ubuntu-flux-xenial.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'mc3man-ubuntu-trusty-media-xenial.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'google.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'google-chrome.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'versable-ubuntu-elementary-update-xenial.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'elementary.list.disable' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;E: Package 'libgl1-mesa-dri:i386' has no installation candidate&#xA;E: Package 'libgl1-mesa-glx:i386' has no installation candidate&#xA;E: Package 'libc6:i386' has no installation candidate&#xA;Press return to continue: &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after which an error stating &quot;You are missing the following 32-bit libraries, and Steam may not run: libc.so.6&quot; pops up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot find anyway to install these libs. Does anyone know how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="7004" LastActivityDate="2020-09-28T00:43:14.033" Title="Steam cannot be installed because of missing 32-bit libraries" Tags="|software-installation|steam|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8808" PostTypeId="2" ParentId="8738" CreationDate="2016-10-19T13:18:03.603" Score="3" Body="&lt;p&gt;I have found solution by myself. in case of someone has the same problem - windows dualboot uses a fastboot, so after boot into windows do not restart your computer , just shutdown it. after a boot through your eOS/ubuntu , make the following entries in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;echo options snd-hda-intel model=auto | sudo tee -a /etc/modprobe.d/alsa-base.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;check all mutes and unmute them through&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo alsamixer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then make&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;shutdown -h now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it should most definitely work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is only temporary solution for microphone though, it will work till you reboot your system. But you may automatize it if you wish so.&#xA;Following terminal entries will fix it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo hda-verb /dev/snd/hwC0D0 0x1a SET_AMP_GAIN_MUTE 0x5003&#xA;sudo hda-verb /dev/snd/hwC0D0 0x1a SET_AMP_GAIN_MUTE 0x6003&#xA;sudo hda-verb /dev/snd/hwC0D0 0x23 SET_AMP_GAIN_MUTE 0x5200&#xA;sudo hda-verb /dev/snd/hwC0D0 0x23 SET_AMP_GAIN_MUTE 0x6200&#xA;sudo hda-verb /dev/snd/hwC0D0 0x08 SET_AMP_GAIN_MUTE 0x503f&#xA;sudo hda-verb /dev/snd/hwC0D0 0x08 SET_AMP_GAIN_MUTE 0x603f&#xA;sudo hda-verb /dev/snd/hwC0D0 0x08 SET_POWER_STATE 0&#xA;sudo hda-verb /dev/snd/hwC0D0 0x1a SET_POWER_STATE 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This solution works for all Asus X5** series with core i7 skylake internal audio with Realtec ALC256 codec.&lt;/p&gt;&#xA;" OwnerUserId="6938" LastActivityDate="2016-10-19T13:18:03.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8809" PostTypeId="2" ParentId="8807" CreationDate="2016-10-19T15:16:31.277" Score="1" Body="&lt;p&gt;One of &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2233005&quot; rel=&quot;nofollow&quot;&gt;these&lt;/a&gt; should do the trick. Test if it opens after each one and report back?&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install steam&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install libgl1-mesa-glx-lts-utopic:i386&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install --reinstall libgl1-mesa-dri:i386&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/libGL.so.1&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo nano /etc/ld.so.conf.d/steam.conf&lt;/code&gt;&lt;br&gt;&#xA;opens a text editor, so insert these lines:&lt;br&gt;&#xA;&lt;code&gt;/usr/lib32&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;/usr/lib/i386-linux-gnu/mesa&lt;/code&gt;&lt;br&gt;&#xA;(save with ctrl+o and exit with ctrl+x)&lt;br&gt;&#xA;&lt;code&gt;sudo ldconfig&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(If 4/5/6 doesn't work by itself, cycle back through 1–3 again)&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="5565" LastEditDate="2016-10-19T19:07:43.797" LastActivityDate="2016-10-19T19:07:43.797" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8812" PostTypeId="1" CreationDate="2016-10-19T19:21:36.950" Score="1" ViewCount="1124" Body="&lt;p&gt;Sometimes, the desktop environment of elementary OS Loki failed to start when i've entered my password in LightDM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you have any tips for me ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx for read this post.&lt;/p&gt;&#xA;" OwnerUserId="6994" LastEditorUserId="308" LastEditDate="2018-08-07T17:17:54.527" LastActivityDate="2018-08-07T17:17:54.527" Title="Sometimes, desktop environment failed to start" Tags="|pantheon|" AnswerCount="3" CommentCount="1" ClosedDate="2018-03-11T01:59:44.390" ContentLicense="CC BY-SA 4.0" />
  <row Id="8813" PostTypeId="1" CreationDate="2016-10-19T20:21:20.503" Score="0" ViewCount="353" Body="&lt;p&gt;I have a hard disk free space indicator icon in the notification area that I would like to move. Is there a way to do that in elementary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THANKS!!&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2016-10-20T04:02:40.617" Title="Is there a way to reorder systray indicator icons?" Tags="|wingpanel|settings|notifications|notification-badge|" AnswerCount="1" CommentCount="1" ClosedDate="2016-10-21T20:09:48.707" ContentLicense="CC BY-SA 3.0" />
  <row Id="8815" PostTypeId="2" ParentId="8813" CreationDate="2016-10-20T04:02:40.617" Score="1" Body="&lt;p&gt;There's no easy way to do that. The ordering of the indicators is hard-coded, as you can see &lt;a href=&quot;http://bazaar.launchpad.net/~wingpanel-devs/wingpanel/trunk/view/head:/src/Services/IndicatorSorter.vala#L29&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2016-10-20T04:02:40.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8816" PostTypeId="2" ParentId="8682" CreationDate="2016-10-20T07:25:09.693" Score="1" Body="&lt;p&gt;OK so after trying everything it turns out that the issue I was having was due to me using the Oracle Java 9 PPA. So I removed Oracle Java by doing sudo apt-get remove --purge java*&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I installed the openjdk 8 and jre and the error went away and I can now run Eclipse or Aptana Studion 3.&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2016-10-20T07:25:09.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8818" PostTypeId="1" AcceptedAnswerId="8831" CreationDate="2016-10-20T10:22:06.890" Score="2" ViewCount="1910" Body="&lt;p&gt;I had previously posted instructions for this that worked for Freya on:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2246/how-to-automatically-disable-touchpad-when-usb-mouse-connected&quot;&gt;How to automatically disable touchpad when USB mouse connected&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Given that Loki uses libinput intead of synaptic drivers, that no longer works.  I have revised the instructions to disable the touchpad using the xinput command, so it appears to work with libinput or synaptic.  The following instructions work in Loki and should work in Freya as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-21T03:27:33.767" Title="How to disable the touchpad when mouse plugged in? - Loki &amp; Freya" Tags="|touchpad|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8819" PostTypeId="2" ParentId="8818" CreationDate="2016-10-20T10:22:06.890" Score="1" Body="&lt;p&gt;Here is my solution for disabling the touchpad in elementary OS when attaching a USB mouse.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some websites for reference:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=188918&quot; rel=&quot;nofollow&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=188918&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=170396&quot; rel=&quot;nofollow&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=170396&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As well as the arch wiki on Synaptics touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal by pressing the key combination: Super + T or by opening it from the Applications menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Get a list of input devices by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note what your touchpad device is called and write it down exactly.  For example, mine is called:&#xA;SynPS/2 Synaptics TouchPad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the following at the prompt to open Scratch as root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Paste the following into the new file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SUBSYSTEM==&quot;input&quot;, KERNEL==&quot;mouse[0-9]*&quot;, ACTION==&quot;add&quot;, ENV{DISPLAY}=&quot;:0&quot;, ENV{XAUTHORITY}=&quot;/home/$USERNAME$/.Xauthority&quot;, RUN+=&quot;/bin/sh -c 'xinput disable SynPS/2\ Synaptics\ TouchPad'&quot;&#xA;SUBSYSTEM==&quot;input&quot;, KERNEL==&quot;mouse[0-9]*&quot;, ACTION==&quot;remove&quot;, ENV{DISPLAY}=&quot;:0&quot;, ENV{XAUTHORITY}=&quot;/home/$USERNAME$/.Xauthority&quot;, RUN+=&quot;/bin/sh -c 'xinput enable SynPS/2\ Synaptics\ TouchPad'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;* Replace $USERNAME$ in these 2 lines with your actual username. *&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;* Replace SynPS/2\ Synaptics\ TouchPad with the name of your touchpad placing backslashes (\) in front of each space in the name *&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the save button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click “Other Locations” in the left hand column of the dialogue box, then &quot;Computer&quot; in the right column.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to the /etc/udev/rules.d folder&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type the name “01-touchpad.rules” as the name of the file and click Save&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Close the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This alone should enable and disable the touchpad when attaching or detaching a USB mouse.  This will not disable the touchpad at system startup if a USB mouse is attached.  To do this you can do the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal&#xA;Enter the following at the prompt to open Scratch as root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file and paste the following into it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;lista=`xinput list | grep -i 'mouse'`&#xA;listb=`xinput list | grep -i 'transceiver' | grep -i 'pointer'`&#xA;listc=`xinput list | grep -i 'receiver' | grep -i 'pointer'`&#xA;&#xA;if [ ${#lista} -eq 0 ] &amp;amp;&amp;amp; [ ${#listb} -eq 0 ] &amp;amp;&amp;amp; [ ${#listc} -eq 0 ]; then&#xA;    exec `xinput enable SynPS/2\ Synaptics\ TouchPad`&#xA;    notify-send &quot;No USB Mouse Detected&quot; &quot;Your Touchpad is Active&quot;&#xA;else&#xA;    exec `xinput disable SynPS/2\ Synaptics\ TouchPad`&#xA;    notify-send &quot;USB Mouse Detected&quot; &quot;Your Touchpad is Disabled&quot;&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;* Again replace SynPS/2\ Synaptics\ TouchPad with the name of your touchpad placing backslashes (\) in front of each space in the name *&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the Save button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click “Other Locations” in the left hand column of the dialogue box, then &quot;Computer&quot; in the right column.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type the name &quot;mouse_detect.sh&quot; for the filename and click Save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the &quot;Files&quot; application as an Administrator.&#xA;If it is on your Plank, right click to find this option.  If it is not, then open &quot;Files&quot; from the application menu and right-click the icon on Plank when it opens to find the option.&#xA;Enter your password when asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &quot;File System&quot; in the left column and navigate to /usr/local/bin.  Your file &quot;mouse_detect.sh&quot; should be present.  Right click on this file and select &quot;Properties&quot;&#xA;Click on the &quot;More&quot; button and then click on each of the &quot;Execute&quot; buttons to ensure they are all highlighted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Close Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now we need to create an autostart entry&#xA;Open &quot;System Settings&quot; and click &quot;Applications&quot;&#xA;Click &quot;Startup&quot; and click the &quot;+&quot; button in the lower left hand corner.&#xA;When the box opens up type &quot;/usr/local/bin/mouse_detect.sh&quot; in the lower box where it asks you to type a custom command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &quot;Files&quot; and press CTRL-H to display hidden files and press Home in the left hand column&#xA;Navigate to the ~/.config/autostart&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should see a file like &quot;Custom Command&quot;, open this in &quot;Scratch&quot; by right clicking and selecting Open With. (select Other Application if necessary)&#xA;You should see a line that says Exec=/usr/local/bin/mouse_detect.sh if you are in the right file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add the following line line to the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X-GNOME-Autostart-Delay=30&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also enter a custom name for the desktop file in the &quot;Name&quot; field and a custom comment in the &quot;Comment&quot; field.&lt;br&gt;&#xA;Note: I had to remove the [en_CA] from my Name[en_CA] field for the name change to be visible in &quot;Files&quot;.  You might have to do the same if you live outside the US.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go back to your startup applications, your custom Name and Comment should be visible and you can enable or disable the autorun of this script on startup by clicking on the toggle to the right of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That should do it.  If the startup script detects other wireless devices as a mouse and disables your touchpad when it shouldn't you can try changing the contents of the mouse_detect.sh file to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;lista=`xinput list | grep -i 'mouse'`&#xA;&#xA;if [ ${#lista} -eq 0 ]; then&#xA;    exec `xinput enable SynPS/2\ Synaptics\ TouchPad`&#xA;    notify-send &quot;No USB Mouse Detected&quot; &quot;Your Touchpad is Active&quot;&#xA;else&#xA;    exec `xinput disable SynPS/2\ Synaptics\ TouchPad`&#xA;    notify-send &quot;USB Mouse Detected&quot; &quot;Your Touchpad is Disabled&quot;&#xA;&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;* Replace SynPS/2\ Synaptics\ TouchPad with the name of your touchpad placing backslashes (\) in front of each space in the name *&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This has less chance of detecting wireless mice though, so only use it if the first one does not work for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jay&lt;/p&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2016-10-20T10:22:06.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8820" PostTypeId="2" ParentId="6763" CreationDate="2016-10-20T13:35:13.093" Score="2" Body="&lt;p&gt;There is a bug in the dependencies so there is a library missing (you can see this in the system log):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gnome-session[1630]: /opt/master-pdf-editor-3/masterpdfeditor3:&#xA;error while loading shared libraries: libQt5PrintSupport.so.5:&#xA;cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It might be a good idea to file a bug report but for now there is a workaround (in the terminal):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libqt5printsupport5 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="26" LastEditDate="2020-07-03T04:29:51.833" LastActivityDate="2020-07-03T04:29:51.833" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="8821" PostTypeId="1" CreationDate="2016-10-20T15:44:40.953" Score="1" ViewCount="44" Body="&lt;p&gt;I just install Elementary Loki on my new PC.&#xA;I install the additional driver and I got an option for an proprietary module for my intel micro controller. I install it and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ethernet is working well, but when I try to enable the wifi, the switch goes off right after.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system is up to date :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -r&lt;/code&gt;&#xA;&lt;code&gt;4.4 ...&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea ?&lt;/p&gt;&#xA;" OwnerUserId="7016" LastActivityDate="2016-10-20T15:44:40.953" Title="Intel Wifi 8260 not working" Tags="|wifi|intel|" AnswerCount="0" CommentCount="3" ClosedDate="2016-10-21T20:10:30.100" ContentLicense="CC BY-SA 3.0" />
  <row Id="8822" PostTypeId="2" ParentId="8492" CreationDate="2016-10-20T18:32:56.540" Score="4" Body="&lt;p&gt;&lt;a href=&quot;http://en.miui.com/forum.php?mod=redirect&amp;amp;goto=findpost&amp;amp;ptid=335532&amp;amp;pid=6987038&quot; rel=&quot;nofollow&quot;&gt;Solution by Demelza&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a terminal and type the command: &lt;code&gt;rfkill list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will list all your network hardware available, and you should notice one that's called &quot;acer-wireless&quot;. Looks like Linux kernel loads an Acer module, which conflicts with our Wi-Fi chip.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can deactivate it for the current session with the command:&#xA;&lt;code&gt;sudo modprobe -r acer-wmi&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your Wi-Fi should now be working as intended.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you want to make it permanent, just edit your &lt;code&gt;/etc/modprobe.d/blacklist.conf&lt;/code&gt; file and add the following line at the bottom of the file:&#xA;&lt;code&gt;blacklist acer_wmi&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It'll blacklist the conflicting module and you'll have fully working Wi-Fi.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6773" LastEditorUserId="5565" LastEditDate="2016-10-20T22:06:51.563" LastActivityDate="2016-10-20T22:06:51.563" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8823" PostTypeId="2" ParentId="5563" CreationDate="2016-10-20T19:26:34.743" Score="0" Body="&lt;p&gt;I have had the same issue for quite a while now, Maybe they have fixed this on the Loki update.&#xA;To solve your issue i have found that pressing the f buttons (f5, f6 f7) solves the problem, not sure why, nor which one specifically does the trick&lt;/p&gt;&#xA;" OwnerUserId="7019" LastActivityDate="2016-10-20T19:26:34.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8824" PostTypeId="1" CreationDate="2016-10-20T19:52:35.873" Score="1" ViewCount="97" Body="&lt;p&gt;After running Loki for about a week with little problem, I am getting a weird problem. I boot and the Loki boots perfectly and fast it gets me to the sign in screen I sign in with no problem, but it then takes a full three minutes to get to a workable screen, a screen where I can actually do anything its just stays with the background image and no links This happened a couple of days ago when I updated using the terminal, maybe its related to that maybe not. My machine , is an AMD 645 64 bits running a Loki 64 Bit. Audio and video works so I don't think its a card or graphic issue. Its not a black scree its the same background image as the sign in screen. after three minutes it gets to the regular desktop and it works fine from there.&lt;/p&gt;&#xA;" OwnerUserId="6658" LastActivityDate="2016-10-20T19:52:35.873" Title="In Loki after signing in its taking three minutes to egt to a screen where I can actually get access to task bar apps or anything else" Tags="|release-loki|desktop|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8825" PostTypeId="1" CreationDate="2016-10-20T20:26:33.380" Score="0" ViewCount="66" Body="&lt;p&gt;Will the system work on a laptop with a bad graphics card? Windows 7 Home Basic operates normally if you do not install the video card driver. The integrated card does not work and the second is fine.&lt;/p&gt;&#xA;" OwnerUserId="7020" LastEditorUserId="5565" LastEditDate="2016-10-20T21:51:17.043" LastActivityDate="2016-10-20T21:56:22.743" Title="Laptop has one bad and one good graphics card" Tags="|system-installation|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8826" PostTypeId="1" AcceptedAnswerId="8827" CreationDate="2016-10-20T21:31:59.727" Score="2" ViewCount="91" Body="&lt;p&gt;I use elementaryOS Loki and have Node.js installed. I have noticed that Node is always up to date. AppCenter has updates almost everyday mostly under &lt;strong&gt;Operating System Updates&lt;/strong&gt;. I wonder if it updates packages from repositories I have added to the system (currently just Git's PPA and Node's nodesource).&lt;/p&gt;&#xA;" OwnerUserId="7021" LastActivityDate="2016-10-20T21:34:03.433" Title="Does AppCenter update packages I have installed (such as Node.js)?" Tags="|appcenter|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8827" PostTypeId="2" ParentId="8826" CreationDate="2016-10-20T21:34:03.433" Score="2" Body="&lt;p&gt;Yes, it does update packages from PPAs too. &lt;/p&gt;&#xA;" OwnerUserId="6506" LastActivityDate="2016-10-20T21:34:03.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8828" PostTypeId="2" ParentId="8825" CreationDate="2016-10-20T21:56:22.743" Score="1" Body="&lt;p&gt;The system should detect the second graphics card, though you may need to disable the first (depending on how it's detected and why it's broken). Not sure which cards you have, but you might need to &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8329/5565&quot;&gt;install a proprietary driver&lt;/a&gt; to improve performance after the original install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can test the OS without installing by &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;following the install directions&lt;/a&gt;, booting from the USB or CD, and following &quot;Try elementary&quot; rather than &quot;Install&quot;. It will boot into the OS for you to test without committing anything to hard drive.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-20T21:56:22.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8830" PostTypeId="2" ParentId="8806" CreationDate="2016-10-21T01:21:05.500" Score="1" Body="&lt;p&gt;I have had troubles with the videos app as well. You could open it by starting it from the terminal with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;audience&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then copy and paste the output of the command here to give us more info.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try installing libdvd-pkg which should install everything you need to play a dvd.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will then need to run the following afterward &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to finish the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reference:&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2312060&quot; rel=&quot;nofollow&quot;&gt;DVD Issues in 16.04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The link also has additional suggestions you might want to try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are a few things I have noticed:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;light-locker needs to be running - I had disabled it and this causes&#xA;videos to crash&lt;/li&gt;&#xA;&lt;li&gt;I need to open files and mount the DVD by clicking on it before I can&#xA;open it in videos&lt;/li&gt;&#xA;&lt;li&gt;Sometimes videos tries to open my LRS_ESP partition (I have a multi-boot system) and play it instead of the DVD drive.  Not sure why.  Usually corrects if I unmount that partition then try again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2556" LastActivityDate="2016-10-21T01:21:05.500" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8831" PostTypeId="2" ParentId="8818" CreationDate="2016-10-21T03:27:33.767" Score="2" Body="&lt;p&gt;Or the far easier method:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install, and run, Dconf-editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then do the following: Search (ctrl-f)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;touchpad&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When you get to the key org.gnome.desktop.peripherals.touchpad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then look in the right pane, and you will find the key &lt;code&gt;send-events&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the value of the key by clicking, and choosing &lt;code&gt;disabled on external mouse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And that's it.&lt;a href=&quot;https://i.stack.imgur.com/4X652.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4X652.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2016-10-21T03:27:33.767" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8832" PostTypeId="2" ParentId="4095" CreationDate="2016-10-21T06:22:16.020" Score="1" Body="&lt;p&gt;It's not just Noise (the music app) but YouTube videos, Spotify, and all system audio stops/pauses when the screen locks (or machine suspends).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest solution is to change the settings for when the screen turns off (turns to lock screen), which is set for 15 minutes by default in &lt;code&gt;Settings &amp;gt; Power&lt;/code&gt;. I agree that system audio should continue in the background when the screen is locked (it's not like the computer suspends). &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1451210&quot; rel=&quot;nofollow&quot;&gt;Subscribe to the feature request&lt;/a&gt; to track its progress.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-21T06:22:16.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8833" PostTypeId="1" CreationDate="2016-10-21T08:28:23.200" Score="1" ViewCount="1430" Body="&lt;p&gt;Can someone please fix the way synaptic package manager looks currently in Loki&lt;a href=&quot;https://i.stack.imgur.com/KfwiG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KfwiG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7028" LastActivityDate="2016-10-21T08:28:23.200" Title="Synaptic Package Manager" Tags="|release-loki|" AnswerCount="0" CommentCount="1" ClosedDate="2016-10-21T20:10:55.750" ContentLicense="CC BY-SA 3.0" />
  <row Id="8834" PostTypeId="2" ParentId="8056" CreationDate="2016-10-21T09:47:32.280" Score="1" Body="&lt;p&gt;It seems like you messed up your main repository source list &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;, you'll have to fix it manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Scratch with administrator privileges:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkexec scratch-text-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then open &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and change&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.canonical.com/ubuntu freya partner&#xA;deb-src http://archive.canonical.com/ubuntu freya partner&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.canonical.com/ubuntu trusty partner&#xA;deb-src http://archive.canonical.com/ubuntu trusty partner&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22" LastActivityDate="2016-10-21T09:47:32.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8835" PostTypeId="2" ParentId="8787" CreationDate="2016-10-21T12:30:55.403" Score="1" Body="&lt;p&gt;In the search field of noise you can search either by artist, album or title (or any other field). However, I there is no support for regular expressions.&#xA;I hope this answers you question.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-21T12:30:55.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8836" PostTypeId="2" ParentId="8807" CreationDate="2016-10-21T15:04:36.410" Score="1" Body="&lt;p&gt;I'm not sure if this is a fix, as I am a newb to linux, but I am also having issues installing steam. I got the same error, and I was able to resolve it by using the following command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7031" LastEditorUserId="7031" LastEditDate="2016-10-21T15:16:45.853" LastActivityDate="2016-10-21T15:16:45.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8838" PostTypeId="2" ParentId="8450" CreationDate="2016-10-21T21:37:21.217" Score="1" Body="&lt;p&gt;The problem is mostly related to kernel version. Try 4.4.0-36/38 kernel using following commands.I had similar problem but after installing these the problem has been solved. To confirm it, I also reproduced the problem by installing/reinstalling the kernels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install linux-headers-4.4.0-36 linux-headers-4.4.0-36-generic linux-image-4.4.0-36-generic linux-image-extra-4.4.0-36-generic&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5946" LastActivityDate="2016-10-21T21:37:21.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8839" PostTypeId="1" CreationDate="2016-10-21T21:39:30.523" Score="0" ViewCount="518" Body="&lt;p&gt;I can't install Java in elementary. I tried to install it in my computer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add/apt/repository ppa&amp;gt;webupd8team/java&#xA;&#xA;bash: webupd8team/java: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="7037" LastEditorUserId="5565" LastEditDate="2016-10-22T14:46:37.393" LastActivityDate="2016-11-22T02:22:37.793" Title="Problem installing ppa webupd8team/java" Tags="|software-installation|ppa|java|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8840" PostTypeId="1" AcceptedAnswerId="8841" CreationDate="2016-10-21T23:37:38.097" Score="4" ViewCount="465" Body="&lt;p&gt;I have elementary OS Loki (0.4) and my computer has strange behavior when I log back from hibernation or suspend. Here is a picture of what is going on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to add that I never hibernate my computer until after I have installed NVIDIA drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ccSjg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ccSjg.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Nvidia version: 361.45.18 from ubuntu graphic ppa&#xA;CPU Intel I7 4790K&#xA;GPU GTX980&#xA;RAM 4x4GB Corsair 1600Mhz ddr3&#xA;SSD 120GB Samsung Evo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7038" LastEditorUserId="308" LastEditDate="2018-08-07T18:17:50.837" LastActivityDate="2018-08-07T18:17:50.837" Title="Screen tearing when logging from hibernate or suspend" Tags="|release-loki|graphic-drivers|greeter|graphics|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8841" PostTypeId="2" ParentId="8840" CreationDate="2016-10-22T07:21:41.250" Score="1" Body="&lt;p&gt;If the graphics issues are only happening in your desktop background, I had the same issue and resolved it by upgrading to &lt;code&gt;nvidia-370&lt;/code&gt;. &lt;a href=&quot;https://elementaryos.stackexchange.com/q/8329/5565&quot;&gt;The directions to do that are covered in another question.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-10-22T07:21:41.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8842" PostTypeId="2" ParentId="8839" CreationDate="2016-10-22T07:24:26.780" Score="1" Body="&lt;p&gt;Add the PPA by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This (1) lets you install PPAs on elementary Loki, (2) adds the PPA you want, and (3) update your records. Then you can install the package you were originally after.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-22T07:24:26.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8843" PostTypeId="1" CreationDate="2016-10-22T08:54:55.687" Score="2" ViewCount="637" Body="&lt;p&gt;Since yesterday I don't have the icon to shutdown my computer to the upper right of my screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't find any solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea ?&lt;/p&gt;&#xA;" OwnerUserId="7016" LastActivityDate="2016-11-25T23:53:37.840" Title="No more power button" Tags="|shutdown|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8844" PostTypeId="2" ParentId="7961" CreationDate="2016-10-22T10:14:40.533" Score="0" Body="&lt;p&gt;In Settings/Displays the two displays should show up in red and blue with their relative positions. There is a gold star in the left top corner to choose which will be the primary monitor, ie has the wing panel in it. The black cogwheel in the right corner is for Configure Display, and will let you choose the display resolution up to the monitor's maximum. Make sure that you do not click on Mirror display. &lt;/p&gt;&#xA;" OwnerUserId="6874" LastActivityDate="2016-10-22T10:14:40.533" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8845" PostTypeId="2" ParentId="8776" CreationDate="2016-10-22T16:00:56.300" Score="0" Body="&lt;p&gt;This was happening because the version of vim in the repos is &lt;code&gt;2:7.4.1689&lt;/code&gt; while checkinstall was using the date-time string as the version by default &lt;code&gt;20161021&lt;/code&gt;. Thus, the version in the repos was considered as &lt;em&gt;newer&lt;/em&gt; (Vim 7.4) and was trying to upgrade the &lt;em&gt;older&lt;/em&gt; (Vim 8) package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was fixed by explicitly specifying the version in checkinstall as &lt;code&gt;2:8.0.46&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launchpad bug and recommended solution &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1635778&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6253" LastActivityDate="2016-10-22T16:00:56.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8847" PostTypeId="2" ParentId="1833" CreationDate="2016-10-22T22:11:49.760" Score="0" Body="&lt;p&gt;I had this message that the elementary handshake SSL had failed, so I looked for SSL on synaptic and found that ssl-cert needed an upgrade, so I updated it through synaptic. I think that fixed whatever it was asking for.&lt;/p&gt;&#xA;" OwnerUserId="7045" LastEditorUserId="84" LastEditDate="2016-10-24T23:26:38.447" LastActivityDate="2016-10-24T23:26:38.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8849" PostTypeId="1" CreationDate="2016-10-22T23:27:23.757" Score="4" ViewCount="2016" Body="&lt;p&gt;In the power settings there is no option to perform the shutdown action when a I press the power button. I only see the options to suspend and hibernate or do nothing.&lt;/p&gt;&#xA;" OwnerUserId="7047" LastActivityDate="2018-02-07T07:45:42.037" Title="How can I configure the power button to shutdown the computer" Tags="|release-loki|shutdown|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8850" PostTypeId="1" CreationDate="2016-10-23T00:06:53.817" Score="5" ViewCount="2964" Body="&lt;p&gt;I've installed loki a while ago and I had some trouble with it like not being able to shutdown, restart, ... I've been able to solve those problems but there are still some huge ones that persist such as black screen after suspend/closing the lid and after sometime using loki it freezes for some reason and I'm not able to do anything (not even Ctrl + Alt + F1) and I have to restart by pressing the power button ..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Computer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel(R) Core(TM) i5-6440HQ CPU @ 2.60GHz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;16GB RAM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia GTX 950M 2GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone tell me what's wrong? Thank you&lt;/p&gt;&#xA;" OwnerUserId="7048" LastEditorUserId="7048" LastEditDate="2016-10-23T01:13:43.517" LastActivityDate="2018-03-08T18:02:22.333" Title="Loki freezes and black screen after suspend" Tags="|release-loki|suspend|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8852" PostTypeId="1" CreationDate="2016-10-23T06:06:07.003" Score="0" ViewCount="200" Body="&lt;p&gt;I am unable to install &lt;a href=&quot;http://uberwriter.wolfvollprecht.de/&quot; rel=&quot;nofollow&quot;&gt;Uberwriter&lt;/a&gt; on Loki. I get the following when trying to run &lt;code&gt;apt-get update&lt;/code&gt; after adding the uberwriter repo with &lt;code&gt;sudo add-apt-repository&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://ppa.launchpad.net/w-vollprecht/ppa/ubuntu xenial Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://ppa.launchpad.net/w-vollprecht/ppa/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a way to override this? Another question here suggested commenting out the cdrom entry in &lt;code&gt;sources.list&lt;/code&gt; but that makes no difference.&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2016-10-24T13:14:42.777" Title="Unable to install uberwriter" Tags="|apt|logo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8853" PostTypeId="1" CreationDate="2016-10-23T08:50:17.443" Score="2" ViewCount="70" Body="&lt;p&gt;I know that this is an issue with the linux kernel, but I'm hoping that there is a work-around. I use my laptop as a home-theater machine, connectting it to my TV with HDMI.  Unfortunately, since the upgrade to the 4.4 kernel, there has been a tremendous performance regression and there are artifacts appearing on my television.  &lt;/p&gt;&#xA;" OwnerUserId="86" LastActivityDate="2016-12-23T03:59:42.997" Title="Any work-around for the performance regression related to external monitors/HDMI?" Tags="|graphic-drivers|kernel|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8854" PostTypeId="1" CreationDate="2016-10-23T11:16:11.850" Score="2" ViewCount="690" Body="&lt;p&gt;Is there a configuration file for Photos, .ini or something else, to fiddle around with advanced settings? Or some other way to do that.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-11-24T01:03:07.933" Title="Is there a configuration file for Photos?" Tags="|release-loki|settings|photos|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8856" PostTypeId="1" CreationDate="2016-10-23T18:11:53.817" Score="2" ViewCount="302" Body="&lt;p&gt;I recently installed elementaryOS on Lenovo B50-45 laptop, the arrow of the SynPS/2 Synaptic touchpad moves on its own and the touchpad seems to be used by two people at once. No it's not a ghost . Hope someone can help me  thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to install gpointing-device-settings &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to edit xinput properties &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to update and upgrade softwares and system&lt;/p&gt;&#xA;&#xA;&lt;p&gt; don't know what to do&lt;/p&gt;&#xA;" OwnerUserId="7051" LastActivityDate="2024-03-19T06:01:25.180" Title="SynPS/2 Synaptic Touchpad gone crazy" Tags="|touchpad|mouse|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8857" PostTypeId="1" AcceptedAnswerId="8860" CreationDate="2016-10-23T18:33:26.993" Score="0" ViewCount="1700" Body="&lt;p&gt;I'm updating the OS on a laptop. The problem is built-in display doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After booting Loki from USB I see a screen with wallpaper, no panel, no options. Right clicking the desktop has no effect. No shortcut helped me open anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I need&lt;/strong&gt;: &#xA; - Open settings on second monitor and change display config, OR&#xA; - Disable built-in monitor and set HDMI as primary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;What I tried&lt;/em&gt;: &#xA; - Xrandr: tried lots of things but they all produce &quot;Can't open display&quot;&lt;/p&gt;&#xA;" OwnerUserId="7052" LastActivityDate="2016-10-24T07:20:56.610" Title="Panel not showing on second monitor" Tags="|release-loki|settings|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8858" PostTypeId="1" CreationDate="2016-10-23T18:53:07.520" Score="1" ViewCount="1888" Body="&lt;p&gt;I seem unable to open/run LibreOffice (in the latest version of Elementary). I installed it via the AppCenter. If I click on it from the Applications menu, the icon appears in the dock briefly, but no windows open. Right-clicking on the dock icon and selecting an option (e.g., &quot;Writer&quot;) does nothing. Eventually, the icon disappears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I run LibreOffice? It is critical that I be able to properly read and write Open Document Format, as well as Microsoft Office-type files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7053" LastEditorUserId="6398" LastEditDate="2016-11-24T14:20:02.923" LastActivityDate="2017-05-22T14:06:24.447" Title="LibreOffice Won't Open when installed by Appcenter" Tags="|release-loki|software-installation|libreoffice|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8859" PostTypeId="2" ParentId="8858" CreationDate="2016-10-23T20:44:19.150" Score="3" Body="&lt;p&gt;I also had this problem installing LibreOffice from appcenter. Solved uninstalling it with appcenter and installing (also with appcenter) separatedly the Libreoffice applications (writer, spreadsheets...). This installs also LibreOfice environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;  &lt;em&gt;I understand that you want to install Libreoffice from app center that's why I gave you an &quot;appcenter solution&quot; that worked for me. Obviouly, you can always install Libreoffice using terminal issuing:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install libreoffice&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-11-23T17:45:21.683" LastActivityDate="2016-11-23T17:45:21.683" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8860" PostTypeId="2" ParentId="8857" CreationDate="2016-10-23T20:49:17.610" Score="0" Body="&lt;p&gt;I solved the problem and achieved HDMI as primary. It took me days of googling to finally find the answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To set HDMI as primary monitor:&#xA;1) &lt;code&gt;Ctrl + alt + f1&lt;/code&gt;. If you are running eOS from the USB or live cd, user is:elementary; there's no password, just press enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) type: &lt;code&gt;export DISPLAY=:0&lt;/code&gt;, enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) run &lt;code&gt;xrandr --output HDMI1 --primary&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can use your distro settings to adjust display settings to fit your needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps ppl.&lt;/p&gt;&#xA;" OwnerUserId="7052" LastActivityDate="2016-10-23T20:49:17.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8861" PostTypeId="1" CreationDate="2016-10-23T21:46:10.893" Score="2" ViewCount="931" Body="&lt;p&gt;Could any one please help me. I have an issue with cursor size. Since I'm using a 4k display, most DEs seem to make cursors huge and with the sizing bug. I have tried dconf-editor to change the size and theme of the cursor, but this, for some reason, works correctly on applications only. When moving the cursor out any application window, the mouse becomes bigger.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've got the themes synced with update-alternatives for the outside application windows themes,and dconf for inside windows theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anything to do with elementary's DE gui causes the sizing issue.&#xA;Bare in mind, dconf sorted this issue out on other ubuntu distros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've made a ~/.Xresources with Xcursor.size: 16 in it, which has not worked. The application window cursor looks like size 16 whilst outside looks 32.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Images of the problem: &lt;a href=&quot;https://i.stack.imgur.com/5BYN0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/5BYN0.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7056" LastActivityDate="2016-11-17T15:01:19.360" Title="Cursor Size not changing" Tags="|release-loki|display|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8862" PostTypeId="1" CreationDate="2016-10-24T00:47:36.457" Score="0" ViewCount="180" Body="&lt;p&gt;When i'm using normally the system then the system freezes in screen that i'm using, by example : a browser open , or whatever application open..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I need restart the computer to use then again, after a time he freezes again ..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Elementary OS Freya 0.3.2 Built on Ubuntu 14.04 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And my pc configs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;RAM : 1.9GB&lt;/li&gt;&#xA;&lt;li&gt;Processor : Dual-Core Pentium® Dual-Core CPU E5400 2.70GHz&lt;/li&gt;&#xA;&lt;li&gt;Graphics : Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Before I used the Elementary Luna and don't happened this.&lt;/p&gt;&#xA;" OwnerUserId="7058" LastActivityDate="2016-11-23T21:55:12.453" Title="Elementary OS freezes during use" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8863" PostTypeId="1" CreationDate="2016-10-24T01:15:05.293" Score="0" ViewCount="58" Body="&lt;p&gt;why &lt;a href=&quot;http://blog.elementary.io/&quot; rel=&quot;nofollow&quot;&gt;http://blog.elementary.io/&lt;/a&gt; direct to &lt;a href=&quot;https://www.datenschutz.de/&quot; rel=&quot;nofollow&quot;&gt;https://www.datenschutz.de/&lt;/a&gt; ? is it normal ? date 2016 10 24&lt;/p&gt;&#xA;" OwnerUserId="7059" LastEditorUserId="5722" LastEditDate="2016-10-25T22:57:46.903" LastActivityDate="2016-10-25T22:57:46.903" Title="http://blog.elementary.io/ direct to https://www.datenschutz.de/?" Tags="|networking|elementary-website|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8864" PostTypeId="2" ParentId="8853" CreationDate="2016-10-24T03:26:56.233" Score="1" Body="&lt;p&gt;Check if this helps you. I know it's another distro, but their documentarion is awesome and can help you in many other situations.&#xA;&lt;a href=&quot;https://wiki.archlinux.org/index.php/intel_graphics#SNA_issues&quot; rel=&quot;nofollow&quot;&gt;https://wiki.archlinux.org/index.php/intel_graphics#SNA_issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7052" LastActivityDate="2016-10-24T03:26:56.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8865" PostTypeId="2" ParentId="8857" CreationDate="2016-10-24T07:20:56.610" Score="0" Body="&lt;p&gt;Open system settings, click displays, you should see two boxes of different colours (I get blue and orange).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each box represents a display, and has two buttons - a star and a gear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The gear gives you a limited number of settings, but the star is the one you want - click it and it will make that display your 'favourite', and both the Wingpanel and Plank dock will appear on that display only.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes your settings will be forgotten, but it is not hard to change them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there is a switch labeled 'Mirror Display:' this one does what it says on the tin, so if you can't change your primary display, this one is for you.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2016-10-24T07:20:56.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8867" PostTypeId="2" ParentId="8863" CreationDate="2016-10-24T12:20:23.307" Score="1" Body="&lt;p&gt;Looks ok for me, may it is a problem with your ISP. &lt;a href=&quot;https://i.stack.imgur.com/1XCmr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1XCmr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="149" LastActivityDate="2016-10-24T12:20:23.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8868" PostTypeId="2" ParentId="8849" CreationDate="2016-10-24T12:22:23.737" Score="1" Body="&lt;p&gt;You have to edit &lt;code&gt;logind.conf&lt;/code&gt; in &lt;code&gt;/etc/systemd&lt;/code&gt;, and change the line as shown below (remember to unhash it):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HandlePowerKey=poweroff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I'm on Manjaro, so I can't confirm if it works, but it should.&lt;/p&gt;&#xA;" OwnerUserId="7067" LastEditorUserId="84" LastEditDate="2016-10-24T23:26:53.850" LastActivityDate="2016-10-24T23:26:53.850" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8869" PostTypeId="2" ParentId="8852" CreationDate="2016-10-24T13:14:42.777" Score="1" Body="&lt;p&gt;UberWriter does not support Ubuntu 16.04 (upon which elementary is based), thus the command to add the PPA fails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may however install it from source with the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install pre-requisite packages: &lt;code&gt;sudo apt install build-essential&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Grab the code: &lt;code&gt;bzr branch lp:uberwriter&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From inside the project directory, install UberWriter with &lt;code&gt;sudo python setup.py install&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2016-10-24T13:14:42.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8870" PostTypeId="1" AcceptedAnswerId="8915" CreationDate="2016-10-24T13:30:07.023" Score="2" ViewCount="1068" Body="&lt;p&gt;I have a desktop with 720p resolution. The Slingshot menu takes up 1/2 my screen width and 3/4th of my screen height -- not cool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I reduce the icon size in the Slingshot menu on Loki (0.4), without installing Elementary Tweaks?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This did not work:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.slingshot icon-size 48&lt;br&gt;&#xA;killall slingshot-launcher&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first command gave no error, and the second command said no such process was found. A restart did not work either.&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-11-27T01:17:32.193" Title="How do I reduce the icon size in the Slingshot menu on Loki (0.4)?" Tags="|release-loki|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8872" PostTypeId="2" ParentId="8862" CreationDate="2016-10-24T21:47:50.880" Score="1" Body="&lt;p&gt;It's really difficult to have any idea how to diagnose this based on the information you've provided. There are thousands of people using Elementary OS without this problem and probably quite a few on very similar specs. The best thing you can do is to run &lt;code&gt;dmesg&lt;/code&gt; to check what's wrong, just run it in a terminal. When the system freezes, you can also hit ctrl+alt+F1 to enter a tty, and run &lt;code&gt;top&lt;/code&gt; to see if a process is hogging your CPU, maybe try restart pantheon (window manager) to see if that helps clear it up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Short of the above, you should ensure that your drivers for your graphics card are installed correctly, and that you're only using applications which are built for your version of the software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know this isn't strictly an answer, but the question is very open ended and impossible to answer - I wouldn't be able to fit this information sensibly into a comment. If you find something interesting in dmesg, or if you find that restarting pantheon itself helps, drop a comment on this answer and I'll try provide more information for how to isolate the exact cause.&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2016-10-24T21:47:50.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8873" PostTypeId="2" ParentId="8854" CreationDate="2016-10-24T21:54:54.857" Score="1" Body="&lt;p&gt;The stuff you're looking for would appear to live in...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/share/pantheon-photos&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This directory contains a data directory, which contains 2 database files. Those 2 files appear to be in SQLite format, and you should be able to open and edit them using an SQLite browser such as &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/sqlitebrowser/&quot; rel=&quot;nofollow&quot;&gt;GUI Editor for SQLite Databases&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Naturally the .bak file seems to be a backup of the other file. I'm not sure why, but presumably in the event that the photos app crashes, it will resort to using the backup. I would recommend having Photos closed when making changes to the database files. Be aware that any changes you make in the Photos app may also be overwritten if you make changes in the database browser afterwards. Just, generally speaking, don't have the database file and Photos app open at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further background information: Elementary OS seems to use their own take on Shotwell photo viewer, and as such the configuration files live in the same place. This appears to be true of some other Elementary apps.&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2016-10-24T21:54:54.857" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8874" PostTypeId="2" ParentId="8856" CreationDate="2016-10-24T22:00:50.057" Score="0" Body="&lt;p&gt;Once you had installed &lt;code&gt;gpointing-device-settings&lt;/code&gt;, did you actually use it? I'm not sure how you'd go about translating them, but the instructions in &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1619040&amp;amp;p=10106902#post10106902&quot; rel=&quot;nofollow&quot;&gt;this post&lt;/a&gt; are quite likely to fix the problem you're encountering. It strikes me that the problem you face is that your drivers are not right for your hardware. Take a look, see what you can work out. If you don't make any progress let me know what you've tried in a comment and I'll install on my old Lenovo laptop to see if I can reproduce it.&lt;/p&gt;&#xA;" OwnerUserId="6205" LastActivityDate="2016-10-24T22:00:50.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8876" PostTypeId="2" ParentId="8849" CreationDate="2016-10-25T03:31:08.287" Score="0" Body="&lt;p&gt;You could put this command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.power power-button-action shutdown&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should force your dconf to be set for shutdown when power button is pressed. &lt;/p&gt;&#xA;" OwnerUserId="7038" LastActivityDate="2016-10-25T03:31:08.287" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8878" PostTypeId="1" CreationDate="2016-10-25T15:25:28.807" Score="2" ViewCount="303" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TXTiW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TXTiW.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open App Center I can't view the updates and items I try to download are in a awaiting list&lt;/p&gt;&#xA;" OwnerUserId="7078" LastEditorUserId="5565" LastEditDate="2016-10-26T06:33:53.323" LastActivityDate="2016-12-26T04:55:04.590" Title="When I open App Center I can't view the updates and items I try to download are in a waiting list" Tags="|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8880" PostTypeId="1" AcceptedAnswerId="9104" CreationDate="2016-10-25T18:35:29.270" Score="3" ViewCount="575" Body="&lt;p&gt;For those who are not familiar with this, smart placement was an option in Compiz that arranged windows avoiding to overlap them. For example, if you open a file manager, then a text editor, and finally a terminal window, you get something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/txuha.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/txuha.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to get this in Loki?&lt;/p&gt;&#xA;" OwnerUserId="6962" LastEditorUserId="15904" LastEditDate="2018-11-30T19:59:11.150" LastActivityDate="2018-11-30T19:59:11.150" Title="Is it possible to get smart window placement?" Tags="|window-manager|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="8881" PostTypeId="1" CreationDate="2016-10-25T21:24:14.620" Score="1" ViewCount="1117" Body="&lt;p&gt;Loki turns off the screen after 10-15 Minutes of inactivity. At the same time it looks the screen automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I wake the computer, the log in screen appears as it should and I can log in. But after logging in, the display stays black. I can see and move the cursor but that's all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can change to tty and restart lightdm with &lt;code&gt;sudo service lightdm restart&lt;/code&gt; but since this closes every opened program this isn't really helpful at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any Ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/A839i.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/A839i.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Somehow I manged to &quot;revive&quot; the screen once and I found that this ↑ prompt appears when the screen was locked. The prompt appears many, many times (I needed to press and hold &lt;kbd&gt;esc&lt;/kbd&gt; for 10 seconds to close all these windows). Maybe this relates to freezing the screen?&lt;/p&gt;&#xA;" OwnerUserId="5274" LastEditorUserId="5274" LastEditDate="2016-10-26T10:36:15.227" LastActivityDate="2017-05-10T03:24:24.247" Title="Loki freezes after screen locks itself" Tags="|release-loki|greeter|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8882" PostTypeId="1" CreationDate="2016-10-26T01:22:15.890" Score="0" ViewCount="7486" Body="&lt;p&gt;I'm new to ubuntu and linux. I recently installed elementary OS a few months ago on my Dell N4050 laptop. It has a built-in wireless adapter which is working fine. I then bought a TP LINK WN822N Wireless USB Adapter but for some reason I can't get it to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried the steps mentioned &lt;a href=&quot;https://askubuntu.com/a/625989&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git&#xA;git clone https://github.com/lwfinger/rtlwifi_new.git cd rtlwifi_new make sudo&#xA;make install&#xA;&#xA;sudo add-apt-repository ppa:hanipouspilot/rtlwifi &#xA;sudo apt-get update&#xA;sudo apt-get install rtl8192cu-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, the steps above did not work for me. I tried going to Settings &gt; Network but did not see another WIFI adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried downloading the drivers from TP Link site &lt;a href=&quot;http://www.tp-link.com/en/download/TL-WN822N.html#Driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and downloaded this &lt;a href=&quot;http://static.tp-link.com/res/down/soft/TL-WN822N(EU)_V4_160315_Linux.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;driver&lt;/a&gt;. I followed the PDF installation guide included but I get an error during &lt;strong&gt;sudo make&lt;/strong&gt;. I don't have the exact error right now as I'm not at home but I can add it here later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried installing the Driver Manager of Linux Mint to see if it can install the driver. However, it did not work as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate any help on this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this &lt;a href=&quot;https://github.com/pvaret/rtl8192cu-fixes/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; and will give it a try later. Will post updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 10-29-2016&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the steps in the link above. Every step succeeded but it seems that the wireless adapter is still not detected even after reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lsub &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 006: ID 0c45:643e Microdia &#xA;Bus 001 Device 005: ID 0a5c:21bc Broadcom Corp. BCM2070 Bluetooth 2.1 + EDR&#xA;Bus 001 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver&#xA;Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 10-31-2016&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently found out that I'm using TL-WN822N v4 and it seems that it might not yet be supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully drivers will come up in the future.&lt;/p&gt;&#xA;" OwnerUserId="7084" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2020-07-12T14:41:00.237" Title="How to install drivers for TP LINK WN822N v4 Wireless USB Adapter?" Tags="|release-loki|wifi|hardware|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8885" PostTypeId="1" CreationDate="2016-10-26T06:43:42.993" Score="0" ViewCount="1076" Body="&lt;p&gt;Changed my power settings so that it would do nothing when I shut the lid on my laptop. Then I had to restart to get the settings to work. After that, when I get to the sign-in screen where I can write my password, after I log on I can only see my wallpaper, no dock or activites bar or anything. I can't even access terminal with superkey + T. I'm running Loki.&lt;/p&gt;&#xA;" OwnerUserId="7087" LastEditorUserId="84" LastEditDate="2016-10-26T14:09:43.517" LastActivityDate="2016-10-26T19:45:34.903" Title="I have no GUI after signing in" Tags="|release-loki|boot|display|desktop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8886" PostTypeId="2" ParentId="4095" CreationDate="2016-10-26T10:01:41.813" Score="3" Body="&lt;p&gt;I've had the same problem and found a workaround while going through the comment on the bug reports:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add your user account to the &lt;code&gt;audio&lt;/code&gt; group by running &lt;code&gt;sudo adduser user audio&lt;/code&gt; with user being your user account name.&lt;/p&gt;&#xA;" OwnerUserId="5634" LastActivityDate="2016-10-26T10:01:41.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8887" PostTypeId="1" CreationDate="2016-10-26T11:56:12.590" Score="2" ViewCount="509" Body="&lt;p&gt;I work with KeePass2 on Linux (and Windows) voor quite some time. It's available for Ubuntu and LinuxMint, why isn't it in the AppCenter for ElementaryOS? We (=the familie &amp;amp; our small business company) really miss it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Arnold&lt;/p&gt;&#xA;" OwnerUserId="7088" LastActivityDate="2016-12-20T08:42:44.203" Title="Why is KeePass2 not in the AppCenter?" Tags="|release-loki|appcenter|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8888" PostTypeId="1" AcceptedAnswerId="8889" CreationDate="2016-10-26T12:51:06.147" Score="1" ViewCount="236" Body="&lt;p&gt;Good morning dear community, i have a little trouble and i can't found any proper explanation for this issue, actually i'm developing an small application to hear radio streaming using Vala and Granite, the problem comes when i try to make a &lt;strong&gt;StatusIcon&lt;/strong&gt; for the app, i followed the related documentation in various site but no one works i'm doing something bad?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is my code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trayicon = new StatusIcon.from_icon_name(&quot;gtk-home&quot;);&#xA;        trayicon.set_tooltip_text(&quot;Tray&quot;);&#xA;        trayicon.set_visible(true);&#xA;        trayicon.set_has_tooltip(true);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;according with the documentation that might work but doesn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;let me know if you guys need to the the full code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks for any help.&lt;/p&gt;&#xA;" OwnerUserId="7089" LastActivityDate="2016-10-26T13:16:41.580" Title="StatusIcon not showing/working" Tags="|icons|development|gtk|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8889" PostTypeId="2" ParentId="8888" CreationDate="2016-10-26T13:16:41.580" Score="1" Body="&lt;p&gt;GtkStatusIcon is deprecated since GTK 3.14. It is more for Windows and KDE and not supported on elementary OS or Gnome 3.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-10-26T13:16:41.580" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="8892" PostTypeId="1" CreationDate="2016-10-26T17:52:20.200" Score="1" ViewCount="108" Body="&lt;p&gt;I just installed Loki the other night and I really like it so far, everything has been working right out of the box on my ThinkPad L460.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing that really bothers me is the touch. Its working and so are all my thinkpad buttons, even my trackpoint is doing its job, which is very good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The PROBLEM is, when using my touchpad i experience some strange &lt;strong&gt;rubberbading&lt;/strong&gt;. When push the pointer to the top for instance at the end of the movement it jumps back quite a bit. This may sound like a minor issue, but it makes clicking on buttons very hard over time, because when jumping back, the pointer will most of the time come off the button. Also it seems the touchpad is now very &quot;sensitive&quot; to movements of my finger, i didnt even have to move it, just rolling around or shifting its weight on the pad now causes some movement on the pointer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was very irritated, because I never had that kind of problem before, not on windows and also not on Linux Mint which I was using before. Changing the sensitivity did not really help with this :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="4992" LastEditorUserId="16827" LastEditDate="2019-04-11T06:25:33.910" LastActivityDate="2019-04-11T06:25:33.910" Title="Strange &quot;rubberbanding&quot; on pointer in Loki" Tags="|release-loki|touchpad|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="8893" PostTypeId="1" CreationDate="2016-10-26T18:00:04.550" Score="1" ViewCount="712" Body="&lt;p&gt;I have installed Loki 64 bits a couple of days ago in my Dell Inspiron 1501.&#xA;I used Ubuntu for more than ten years, so I think I could install the network printer the same way. The problem is that the dialog box cannot allow me to browse the network to find the shared printers. I have to input the type of connection first: http, https, ipp, HP Socket. No smb share appears. What can I do?&lt;/p&gt;&#xA;" OwnerUserId="7095" LastActivityDate="2018-11-27T12:46:03.267" Title="Network printer add Loki system settings printers" Tags="|release-loki|networking|printer|" AnswerCount="0" CommentCount="1" ClosedDate="2018-12-04T22:03:14.323" ContentLicense="CC BY-SA 3.0" />
  <row Id="8894" PostTypeId="1" CreationDate="2016-10-26T18:24:42.810" Score="1" ViewCount="194" Body="&lt;p&gt;Rotation is up side down and keeps being missed up with the slightest of movements, using Asus, once the installing is done the whole display is up side down and stay flipped however I turn the machine, also it is really sensitive, keeps rotating even if I simply move the laptop sideways. How can I disable rotation overall. &quot;None in display settings does not work&quot;&lt;/p&gt;&#xA;" OwnerUserId="7096" LastActivityDate="2016-10-26T18:24:42.810" Title="How can I disable rotation overall" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ClosedDate="2016-10-26T22:38:44.443" ContentLicense="CC BY-SA 3.0" />
  <row Id="8895" PostTypeId="2" ParentId="8885" CreationDate="2016-10-26T19:45:34.903" Score="2" Body="&lt;p&gt;This happens to me sometimes as well. I have yet to find the root cause of it or a real fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What helps in my case is to press ctrl+alt+F1 to go to a terminal. Log in with your user credentials and type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;startx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to (re)start X.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, press ctrl+alt+F7 to go back to your desktop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a security precaution, I would recommend (if this works) to go back to ctrl+alt+F1 and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to make sure your user is logged out of this terminal environment. &lt;/p&gt;&#xA;" OwnerUserId="7097" LastActivityDate="2016-10-26T19:45:34.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8896" PostTypeId="1" AcceptedAnswerId="8904" CreationDate="2016-10-26T19:49:53.647" Score="1" ViewCount="1533" Body="&lt;p&gt;As the title says, does &lt;a href=&quot;http://meetfranz.com&quot; rel=&quot;nofollow&quot;&gt;Franz&lt;/a&gt; work on elementary os freya? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, how to install it?&lt;/p&gt;&#xA;" OwnerUserId="4847" LastActivityDate="2016-10-28T13:22:29.833" Title="Does Franz (multi messenger) work on elementary freya?" Tags="|release-freya|applications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8898" PostTypeId="2" ParentId="8878" CreationDate="2016-10-26T20:21:52.840" Score="1" Body="&lt;p&gt;It sounds like you may be encountering one of these bugs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1598608&quot; rel=&quot;nofollow noreferrer&quot;&gt;No error feedback&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1598837&quot; rel=&quot;nofollow noreferrer&quot;&gt;App Center won't update applications&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1651596&quot; rel=&quot;nofollow noreferrer&quot;&gt;Repositories updated after almost every opening AppCenter&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Adding details to the bug report and marking yourself as affected can help the developers troubleshoot and prioritize the problem.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="160" LastEditDate="2016-12-26T04:55:04.590" LastActivityDate="2016-12-26T04:55:04.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8899" PostTypeId="2" ParentId="7816" CreationDate="2016-10-26T20:49:31.783" Score="0" Body="&lt;p&gt;Although the fact that it stays completely black in your case might suggest you have another issue, I would still take a look at number six &lt;a href=&quot;http://www.circuidipity.com/c720-ubuntubook.html&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;, which solved my suspend issues:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Problem: Suspend-and-resume generates a stream of errors ...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ehci-pci 0000:00:1d.0: port 1 resume error -19&#xA;ehci-pci 0000:00:1d.0: port 2 resume error -19&#xA;usb usb3-port1: over-current condition&#xA;usb usb3-port1: connect-debounce failed&#xA;usb usb3-port2: over-current condition&#xA;usb usb3-port2: connect-debounce failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;... and blocks the Chromebook from executing a proper restart/shutdown.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;FIX: Create &lt;code&gt;/lib/systemd/system-sleep/ehci-pci.sh ...&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;case $1/$2 in&#xA;    pre/*)&#xA;    # Unbind ehci for preventing error&#xA;    echo -n &quot;0000:00:1d.0&quot; | tee /sys/bus/pci/drivers/ehci-pci/unbind&#xA;    ;;&#xA;    post/*)&#xA;    # Bind ehci for preventing error&#xA;    echo -n &quot;0000:00:1d.0&quot; | tee /sys/bus/pci/drivers/ehci-pci/bind&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;... and make it executable ...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo chmod 755 /lib/systemd/system-sleep/ehci-pci.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Configure boot options in /etc/default/grub ...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash tpm_tis.force=1&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;... save the changes and run ...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Suspend now works reliably when triggered from Ubuntu's shutdown menu or closing the lid and will resume the system with the desktop locked and a password prompt.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="7098" LastEditorUserId="5565" LastEditDate="2016-10-27T06:48:48.033" LastActivityDate="2016-10-27T06:48:48.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8900" PostTypeId="1" CreationDate="2016-10-26T22:17:46.683" Score="1" ViewCount="175" Body="&lt;p&gt;I followed these instructions to install gcalcli (a google calendar commandline interface):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://installion.co.uk/ubuntu/xenial/universe/g/gcalcli/install/index.html&quot; rel=&quot;nofollow&quot;&gt;https://installion.co.uk/ubuntu/xenial/universe/g/gcalcli/install/index.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but get this error when I try to run it after install:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Traceback (most recent call last):&#xA;File &quot;/usr/local/bin/gcalcli&quot;, line 4, in &#xA;&lt;strong&gt;import&lt;/strong&gt;('pkg_resources').run_script('gcalcli==3.4.0', 'gcalcli')&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 2927, in &#xA;@_call_aside&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 2913, in _call_aside&#xA;f(*args, **kwargs)&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 2940, in _initialize_master_working_set&#xA;working_set = WorkingSet._build_master()&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 637, in _build_master&#xA;return cls._build_from_requirements(&lt;strong&gt;requires&lt;/strong&gt;)&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 650, in _build_from_requirements&#xA;dists = ws.resolve(reqs, Environment())&#xA;File &quot;/usr/lib/python2.7/dist-packages/pkg_resources/&lt;strong&gt;init&lt;/strong&gt;.py&quot;, line 834, in resolve&#xA;raise VersionConflict(dist, req).with_context(dependent_req)&#xA;pkg_resources.ContextualVersionConflict: (oauth2client 1.4.12 (/usr/local/lib/python2.7/dist-packages/oauth2client-1.4.12-py2.7.egg), Requirement.parse('oauth2client&amp;lt;5.0.0dev,&gt;=1.5.0'), set(['google-api-python-client']))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone figured this out? I've tried installing the required oauth2client &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pypi.python.org/pypi/oauth2client/4.0.0&quot; rel=&quot;nofollow&quot;&gt;https://pypi.python.org/pypi/oauth2client/4.0.0&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;... but that doesn't help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="7099" LastActivityDate="2017-02-13T12:57:25.387" Title="how to install gcalcli on Loki?" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ClosedDate="2017-02-19T20:40:59.643" ContentLicense="CC BY-SA 3.0" />
  <row Id="8901" PostTypeId="2" ParentId="8843" CreationDate="2016-10-26T23:21:25.497" Score="1" Body="&lt;p&gt;Try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-session&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot and it should be there again&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-10-26T23:21:25.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8902" PostTypeId="2" ParentId="4226" CreationDate="2016-10-27T03:26:24.300" Score="6" Body="&lt;p&gt;To get Slack and other apps to show a system tray-like icon in Wingpanel you have to update the apps &lt;code&gt;.desktop&lt;/code&gt; file and add &lt;code&gt;env XDG_CURRENT_DESKTOP=Unity&lt;/code&gt; to the start of the Exec key. Using Slack as an example (this works with every app I tried it on that has a system tray icon) we would do the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /usr/share/applications/slack.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the &lt;code&gt;Exec&lt;/code&gt; key from:&#xA;&lt;code&gt;Exec=/usr/bin/slack --disable-gpu %U&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to:&#xA;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity /usr/bin/slack --disable-gpu %U&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2016-10-27T03:26:24.300" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8904" PostTypeId="2" ParentId="8896" CreationDate="2016-10-27T12:00:55.453" Score="3" Body="&lt;p&gt;Franz works perfect in Loki, should't be a Problem in Freya. Do the following in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir -p /opt/franz&#xA;&#xA;wget -qO- https://github.com/meetfranz/franz-app/releases/download/4.0.4/Franz-linux-x64-4.0.4.tgz | sudo tar xvz -C /opt/franz/&#xA;&#xA;sudo wget &quot;https://cdn-images-1.medium.com/max/360/1*v86tTomtFZIdqzMNpvwIZw.png&quot; -O /opt/franz/franz-icon.png&#xA;&#xA;sudo bash -c &quot;cat &amp;lt;&amp;lt;EOF &amp;gt; /usr/share/applications/franz.desktop                                                                 &#xA;[Desktop Entry]&#xA;Name=Franz&#xA;Comment=&#xA;Exec=/opt/franz/Franz&#xA;Icon=/opt/franz/franz-icon.png&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Messaging,Internet&#xA;EOF&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Everything should work fine now.&lt;/p&gt;&#xA;" OwnerUserId="7110" LastActivityDate="2016-10-27T12:00:55.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8905" PostTypeId="1" CreationDate="2016-10-27T12:05:51.513" Score="1" ViewCount="143" Body="&lt;p&gt;As the title says, I want to sync Noise with my Android phone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Mounting with MTP works perfectly.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now is the only question: Why does the device not show up in Noise?&lt;/p&gt;&#xA;" OwnerUserId="7110" LastActivityDate="2016-10-27T12:05:51.513" Title="How to sync Android phone with Noise?" Tags="|music|android|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8906" PostTypeId="2" ParentId="8155" CreationDate="2016-10-27T13:01:54.253" Score="2" Body="&lt;p&gt;This seems to be a bug. Filed it on Launchpad &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1627498&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5811" LastActivityDate="2016-10-27T13:01:54.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8910" PostTypeId="1" CreationDate="2016-10-27T15:43:14.480" Score="3" ViewCount="4001" Body="&lt;p&gt;After following instructions in a number of other threads, I am still unable to get the built-in WiFi on my 13&quot; MacBook Pro (12,1) to show up or work under the latest version of elementaryOS. Thankfully, my Thunderbolt to Ethernet adapter works flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Naturally, we're dealing with a Broadcom chip, which from my research are some of the most difficult to get working under Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;strong&gt;sudo lshw -C network&lt;/strong&gt; gives me the following output: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;       description: Network controller&#xA;       product: BCM43602 802.11ac Wireless LAN SoC&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       version: 01&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list&#xA;       configuration: driver=wl latency=0&#xA;       resources: irq:18 memory:c1400000-c1407fff memory:c1000000-c13fffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running &lt;strong&gt;lspci -nn -d 14e4:&lt;/strong&gt; gives me the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;03:00.0 Network controller [0280]: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC [14e4:43ba] (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My specific chip, Broadcom BCM34602 [43ba, rev 1] says it is supported by &lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/drivers/brcm80211&quot; rel=&quot;nofollow&quot;&gt;brcmsmac 3.17+&lt;/a&gt;, but I am too much of a Linux newbie to know how to install this to test it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts for how to proceed? Thanks so much for your assistance. :)&lt;/p&gt;&#xA;" OwnerUserId="7113" LastActivityDate="2016-11-04T17:23:52.207" Title="WiFi on MacBook Pro (12,1 - Early 2015)" Tags="|wifi|networking|drivers|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8911" PostTypeId="2" ParentId="7447" CreationDate="2016-10-27T20:12:20.343" Score="4" Body="&lt;p&gt;Removing the App Center works for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can always reinstall it later; after the problems are addressed maybe :).&lt;/p&gt;&#xA;" OwnerUserId="7115" LastEditorUserId="26" LastEditDate="2016-10-27T20:37:43.810" LastActivityDate="2016-10-27T20:37:43.810" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8912" PostTypeId="1" CreationDate="2016-10-27T20:54:35.923" Score="1" ViewCount="81" Body="&lt;p&gt;I have installed f.lux on my computer. Sometimes suddenly it stops working and the screen turns into the original color, so I have to kill the process and restart it, and then it works again. Any way to solve this problem? Or any similar program?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-10-27T20:54:35.923" Title="f.lux stops working sometimes when a (native) notification arrives" Tags="|release-freya|notifications|" AnswerCount="0" CommentCount="5" ClosedDate="2017-01-05T18:38:51.467" ContentLicense="CC BY-SA 3.0" />
  <row Id="8914" PostTypeId="2" ParentId="8155" CreationDate="2016-10-28T00:04:51.497" Score="1" Body="&lt;p&gt;Quickest way to get rid of this before it is fixed to kill appcenter in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall appcenter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2016-10-28T00:04:51.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8915" PostTypeId="2" ParentId="8870" CreationDate="2016-10-28T00:47:30.417" Score="2" Body="&lt;p&gt;Looking at the source code it looks like Slingshot is now ignoring this value and has the icon size hardcoded into the &lt;code&gt;src/Widgets/AppEntry.vala&lt;/code&gt; here on &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/slingshot/trunk/view/head:/src/Widgets/AppEntry.vala#L100&quot; rel=&quot;nofollow&quot;&gt;Launchpad&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2016-10-28T00:47:30.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8916" PostTypeId="2" ParentId="7816" CreationDate="2016-10-28T01:57:09.003" Score="1" Body="&lt;p&gt;This is a confirmed bug that located &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1628929&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;. I have found the best way to deal with this bug without rebooting is to switch your TTY (&lt;code&gt;CTRL&lt;/code&gt;-&lt;code&gt;ALT&lt;/code&gt;-&lt;code&gt;F1&lt;/code&gt;) and run &lt;code&gt;sudo killall lightdm&lt;/code&gt;. It should switch you back to the login screen and you should be able to log in and get back to your desktop.&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2016-10-28T01:57:09.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8917" PostTypeId="2" ParentId="1631" CreationDate="2016-10-28T02:02:51.573" Score="0" Body="&lt;p&gt;Switch your TTY (&lt;code&gt;CTRL&lt;/code&gt;-&lt;code&gt;ALT&lt;/code&gt;-&lt;code&gt;F1&lt;/code&gt;) and try running &lt;code&gt;sudo killall lightdm&lt;/code&gt;. It should drop you back to the login screen and you should be able to log in as normal. This sounds like a confirmed bug located &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1628929&quot; rel=&quot;nofollow&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2016-10-28T02:02:51.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8918" PostTypeId="1" CreationDate="2016-10-28T08:38:55.050" Score="1" ViewCount="836" Body="&lt;p&gt;I have installed elementaryOS Loki and in some applications those buttons don't appear. They are still there, if I click where they are supposed to be I can close, minimize and maximize windows, but they are completely invisible in a lot of apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="7123" LastActivityDate="2017-04-28T14:35:52.933" Title="Close, minimize and maximize buttons not appearing in some apps" Tags="|release-loki|minimize|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8920" PostTypeId="2" ParentId="8896" CreationDate="2016-10-28T13:22:29.833" Score="0" Body="&lt;p&gt;I'm no totally sure, but I think that you should install &lt;strong&gt;libgcrypt11&lt;/strong&gt; to make it work properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do it here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;32 bits: &lt;a href=&quot;https://launchpad.net/ubuntu/+archive/primary/+files/libgcrypt11_1.5.3-2ubuntu4.2_i386.deb&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/ubuntu/+archive/primary/+files/libgcrypt11_1.5.3-2ubuntu4.2_i386.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;64 bits: &lt;a href=&quot;https://launchpad.net/ubuntu/+archive/primary/+files/libgcrypt11_1.5.3-2ubuntu4.2_amd64.deb&quot; rel=&quot;nofollow&quot;&gt;https://launchpad.net/ubuntu/+archive/primary/+files/libgcrypt11_1.5.3-2ubuntu4.2_amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try it after GDog solution if it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="6320" LastActivityDate="2016-10-28T13:22:29.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8921" PostTypeId="1" CreationDate="2016-10-28T14:27:33.820" Score="2" ViewCount="653" Body="&lt;p&gt;Here is my &lt;code&gt;/etc/lightdm/pantheon-greeter.conf&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[greeter]&#xA;xft-dpi=200&#xA;onscreen-keyboard=true&#xA;keyboard=onboard&#xA;indicators=~language;~a11y;~power&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No language or a11y indicators, no HiDPI or onboard keyboard. &lt;/p&gt;&#xA;" OwnerUserId="4828" LastEditorUserId="578" LastEditDate="2017-04-18T08:14:06.783" LastActivityDate="2017-04-18T08:14:06.783" Title="Pantheon greeter configuration failed" Tags="|greeter|pantheon|hidpi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8922" PostTypeId="1" CreationDate="2016-10-28T14:48:57.150" Score="0" ViewCount="658" Body="&lt;p&gt;I am new with elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a problem, my RX 480 Shappire nitro oc don't work with this OS and now i have a bad resolution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I follow this: &lt;a href=&quot;http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-GPU-PRO-Linux-Beta-Driver%E2%80%93Release-Notes.aspx&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-GPU-PRO-Linux-Beta-Driver%E2%80%93Release-Notes.aspx&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But not supported by elementary OS (it's Ubuntu 16.04) but don't work, help please?&lt;/p&gt;&#xA;" OwnerUserId="7124" LastEditorUserId="16827" LastEditDate="2019-04-13T08:26:54.490" LastActivityDate="2023-12-19T06:08:41.040" Title="elementary OS &amp; RX 480" Tags="|resolution|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8924" PostTypeId="1" CreationDate="2016-10-28T15:47:11.763" Score="2" ViewCount="4274" Body="&lt;p&gt;I'm using a touch laptop, I want to disable auto rotate, can not find an option that dies that, can you guide me please or provide a terminal line for it? Thanks for the Awesome OS.&lt;/p&gt;&#xA;" OwnerUserId="7096" LastActivityDate="2020-03-29T04:47:39.983" Title="How to disable rotation" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8925" PostTypeId="1" CreationDate="2016-10-28T16:18:06.380" Score="1" ViewCount="1749" Body="&lt;p&gt;Gala use above 50% of cpu even you don't do anything. There seems to be  no problems with xfce and openbox. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found these with google:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/questions/40289841/elementary-os-0-4-loki-x64-gala-high-cpu-usage&quot;&gt;https://stackoverflow.com/questions/40289841/elementary-os-0-4-loki-x64-gala-high-cpu-usage&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/4fb7r7/gala_high_cpu_usage/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/4fb7r7/gala_high_cpu_usage/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4828" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2017-03-27T13:55:42.883" Title="Gala high CPU usage" Tags="|gala|cpu|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8926" PostTypeId="1" CreationDate="2016-10-28T18:28:34.187" Score="1" ViewCount="142" Body="&lt;p&gt;I have an Intel Graphics card. The brightness range goes from 0 (black) to 976 (full brightness). I would like to set the minimum brightness to 6 since it is the minimum brightness in which I can see the screen. How can I do that?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; $ dir /sys/class/backlight/intel_backlight&#xA; actual_brightness  bl_power  brightness  device  max_brightness  power subsystem  type  uevent&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can manually set the brightness with: &lt;code&gt;echo X&amp;gt; /sys/class/backlight/intel_backlight/brightness&lt;/code&gt; (where X is a number between 0-976)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be also okay if I could increase the sensitivity of the slider between the values 5-50, so that it goes 5 by 5 or something. Right now it goes 50 by 50 and it's too much change in low light conditions.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-10-28T18:28:34.187" Title="Can I change the brightness threshold of the slider?" Tags="|display|brightness|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8927" PostTypeId="1" AcceptedAnswerId="13175" CreationDate="2016-10-28T18:50:20.877" Score="6" ViewCount="5340" Body="&lt;p&gt;My power menu looks the following and I want to have a hibernate option:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4TLxr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4TLxr.png&quot; alt=&quot;power menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Freya I was able to activate the hibernate option by following the steps outlined in this &lt;a href=&quot;https://elementaryos.stackexchange.com/a/923/6968&quot;&gt;answer&lt;/a&gt;. I tried the same steps in Loki, but this didn't add the hibernate option.&lt;/p&gt;&#xA;" OwnerUserId="6968" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2020-04-14T08:45:58.047" Title="How to enable hibernate option in menu? [Loki]" Tags="|release-loki|power|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8928" PostTypeId="1" CreationDate="2016-10-28T19:38:14.823" Score="2" ViewCount="548" Body="&lt;p&gt;I would love to have a 3x3 grid view of my workspaces on Elementary OS Loki. I've found an gnome extension on &lt;a href=&quot;https://extensions.gnome.org/extension/484/workspace-grid/&quot; rel=&quot;nofollow&quot;&gt;this page&lt;/a&gt; but following the install instructions doesn't give me &quot;shell extensions&quot; so i didn't know how to proceed... I couldn't find anymore help online, hence my question here, hope you can help me finding a solution for workspaces in gridview :)&lt;/p&gt;&#xA;" OwnerUserId="7127" LastActivityDate="2017-03-07T11:58:59.250" Title="Workspace grid view in Elementary OS" Tags="|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8930" PostTypeId="2" ParentId="6755" CreationDate="2016-10-28T20:37:24.740" Score="0" Body="&lt;p&gt;Classic blue theme is quite acceptable solution.&#xA;It is not as classic as it is named, but it has another colors for active and inactive window, at least.&lt;/p&gt;&#xA;" OwnerUserId="7129" LastActivityDate="2016-10-28T20:37:24.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8931" PostTypeId="2" ParentId="2351" CreationDate="2016-10-28T20:57:24.540" Score="0" Body="&lt;p&gt;The problem comes (as you guessed and Gabriel confirmed) because you have lots of old config files in your home folder. You are probably going to have this problem with most of the distros you install. The right way to install a new distro (at least is what works for me) is erasing old config folders and files in your home folder before installing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;This is the way I do it:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot live session.&lt;/li&gt;&#xA;&lt;li&gt;Mount your &lt;code&gt;&quot;/home&quot;&lt;/code&gt; partition&lt;/li&gt;&#xA;&lt;li&gt;Open the default file manager using sudo from terminal (e.g &lt;code&gt;sudo pantheon-files&lt;/code&gt;). (1)&lt;/li&gt;&#xA;&lt;li&gt;Toggle the hidden files view (generaly ctrl + h). (1)&lt;/li&gt;&#xA;&lt;li&gt;Delete all the folders and files starting with a dot (.). If you want to keep some speciffic configurations, you could skip those folders, e.g., I usualy keep &lt;code&gt;.mozilla/&lt;/code&gt; to avoid loosing my bookmarks and configurations. (1)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;WARNING!: all the files and folders erased this way, wont go to trash or anithing like that, so be careful when erasing. If you erase something unintentionaly, is posible to recover it but is not simple.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;Close file browser.&lt;/li&gt;&#xA;&lt;li&gt;Unmout partition as you usually do it.&lt;/li&gt;&#xA;&lt;li&gt;Install as usual taking SPECIAL CARE to use the &lt;code&gt;same user name you have used&lt;/code&gt; for the home folder you want to use.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(1): If you feel confident with the terminal, you can use the command &lt;code&gt;rm -r name_of_folder|name_of_file&lt;/code&gt;(be carefull, you can erase things and there in so easy way to recover them) instead of steps 3, 4, 5 and 6. &lt;strong&gt;WARNING APPLIES IN THIS CASE TOO.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;AFTER installing:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Login. It could be a little funky, don't worry. (2)&lt;/li&gt;&#xA;&lt;li&gt;Open a terminal.&lt;/li&gt;&#xA;&lt;li&gt;Copy all the files from &lt;code&gt;/etc/skell/&lt;/code&gt; folder into your &lt;code&gt;home folder&lt;/code&gt;. I use this command: &lt;code&gt;sudo cp -r /etc/skel/. /home/[user]/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Logout and login again. Everything should be working fine.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(2): If you can't login, use &lt;code&gt;ctrl + alt + f2&lt;/code&gt; to use a tty, login from there and jump to step 3. Then, logout and press &lt;code&gt;ctrl + alt + f7&lt;/code&gt; to go back to the graphical interface. Maybe if still having troubles, restart the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this would be usefull for someone, I learned it by trial and error... XD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD: Sorry about my english, i'm not a native speaker.&lt;/p&gt;&#xA;" OwnerUserId="6466" LastActivityDate="2016-10-28T20:57:24.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8932" PostTypeId="2" ParentId="8881" CreationDate="2016-10-28T21:16:51.437" Score="1" Body="&lt;p&gt;I have this bug also on stable release of Loki.&#xA;It's probably this bug &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1617687&quot; rel=&quot;nofollow&quot;&gt;1635254 (desktop freezes &amp;amp; misbehaves on login)&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a temporary fix i changed Settings =&gt; Security &amp;amp; Privacy, unchecked lock after screen turn off.&lt;/p&gt;&#xA;" OwnerUserId="7130" LastActivityDate="2016-10-28T21:16:51.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8933" PostTypeId="1" CreationDate="2016-10-28T21:57:28.117" Score="0" ViewCount="982" Body="&lt;p&gt;every time I start my notebook after suspend appear about 6 posters asking for authentication for update the system, as in the picture below.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2Hps6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Hps6.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7128" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-10-29T21:13:43.327" Title="Asking for authentication for update the system" Tags="|release-loki|elementary-website|" AnswerCount="2" CommentCount="0" ClosedDate="2016-11-02T14:12:42.530" ContentLicense="CC BY-SA 3.0" />
  <row Id="8934" PostTypeId="2" ParentId="7240" CreationDate="2016-10-28T22:09:41.030" Score="1" Body="&lt;p&gt;I've had this happen to me a couple of times. Usually when I've been manually configuring partitions and made a mistake somewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ls&lt;/code&gt; in grub will show you all the partitions on each hard drive that grub can find.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you think you know what the boot partition is for elementary OS e.g (hd0, gpt4) then you can boot by telling grub where to load it's configfile:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;configfile (hd0, gpt4)/boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe someone else can chime in about how to boot Windows.&lt;/p&gt;&#xA;" OwnerUserId="7131" LastActivityDate="2016-10-28T22:09:41.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8935" PostTypeId="2" ParentId="8933" CreationDate="2016-10-29T00:09:26.633" Score="0" Body="&lt;p&gt;Its an appcenter bug. I don't know of a fix, but you can run:&#xA;killall appcenter &lt;/p&gt;&#xA;&#xA;&lt;p&gt;stops appcenter from running in the background. Then suspend your notebook and wake it back up. Problem should be gone, but will come back when appcenter is run or you reboot.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-10-29T00:09:26.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8936" PostTypeId="2" ParentId="7086" CreationDate="2016-10-29T00:15:18.167" Score="1" Body="&lt;p&gt;You can drag and drop the folder too. Just look for the cursor to have a green plus sign and a line to appear indicating where in the list the folder will appear.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-10-29T00:15:18.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8937" PostTypeId="2" ParentId="8752" CreationDate="2016-10-29T00:31:28.920" Score="1" Body="&lt;p&gt;often this can be fixed by editing the boot options. When you are on the screen that lets you select try or install you can hit a button to edit the options. I believe it is &quot;e&quot; you need to press. look for a line that says &quot;quite splash&quot; add &quot;nomodeset&quot; then hit f10 or enter or whatever the screen says to hit to boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;nomodeset keeps the kernel from controlling graphics card settings and lets the xorg do it instead. It will probably let you boot up and install, but you'll want to figure out how to boot without it after you install because it makes your graphics run slower.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-10-29T00:31:28.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8938" PostTypeId="2" ParentId="8369" CreationDate="2016-10-29T00:51:16.860" Score="0" Body="&lt;p&gt;I'm on a 2011 mini. I had to use nomodeset as well, but decided to install refind boot manager to make customizing boot options easier. With it I was able to get the mini to boot without nomodeset and without proprietary drivers. Whistler is workin well for me. I haven't tried two monitors at once but I have tried both hdmi and the mini display port. Both are working.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-10-29T00:51:16.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8939" PostTypeId="2" ParentId="8918" CreationDate="2016-10-29T04:40:39.943" Score="1" Body="&lt;p&gt;Change theme, i install tweaks and that works for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;install this if you wanna get tweaks.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common &#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update &#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;tweaks install on your system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can use themes for gtk and change theme.&lt;/p&gt;&#xA;" OwnerUserId="7133" LastEditorUserId="578" LastEditDate="2017-04-28T14:35:52.933" LastActivityDate="2017-04-28T14:35:52.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8940" PostTypeId="1" CreationDate="2016-10-29T07:19:46.347" Score="0" ViewCount="137" Body="&lt;p&gt;Will the Fn function keys be able to work fully?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I have a full 1080p HD display but its a bit peculiar. The screen will dim and brighten on dark/white backgrounds. I disabled this so it functions normally using Intel's Graphic Properties. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will I still be able to fix this in elementary OS if the screen reverts to its old habits?&lt;/p&gt;&#xA;" OwnerUserId="7134" LastEditorDisplayName="user16597" LastEditDate="2018-12-08T21:18:11.460" LastActivityDate="2018-12-08T21:18:11.460" Title="I'm thinking of completely uninstalling Windows 10 and using Elementary OS full time but I have a couple questions" Tags="|graphic-drivers|microsoft-windows|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="8941" PostTypeId="1" CreationDate="2016-10-29T09:18:18.690" Score="0" ViewCount="203" Body="&lt;p&gt;I installed Birdfont via the Appcenter on elementary OS!&#xA;Installation works, but the program doesn´t start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On starting in the Terminal I get the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;birdfont: error while loading shared libraries: libxmlbird.so.1.0: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6317" LastEditorUserId="16827" LastEditDate="2019-04-13T13:46:43.050" LastActivityDate="2019-04-13T13:46:43.050" Title="Install Birdfont on elementary OS" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="8942" PostTypeId="2" ParentId="2524" CreationDate="2016-10-29T10:14:46.000" Score="0" Body="&lt;p&gt;Do you have any idea for permanent solution for this issue? Because restart of lightdm means closing all programsand that the system becomes unusable...&lt;/p&gt;&#xA;" OwnerUserId="7135" LastActivityDate="2016-10-29T10:14:46.000" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8943" PostTypeId="1" CreationDate="2016-10-29T10:34:35.437" Score="1" ViewCount="754" Body="&lt;p&gt;Does anyone know how to launch Slingshot (wingpanel) from the terminal? &lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-12-03T19:44:23.483" Title="Slingshot (wingpanel) command - LOKI" Tags="|release-loki|wingpanel|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8944" PostTypeId="2" ParentId="8943" CreationDate="2016-10-29T11:06:00.843" Score="2" Body="&lt;pre&gt;&lt;code&gt;wingpanel --toggle-indicator app-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastEditorUserId="37" LastEditDate="2016-12-03T19:44:23.483" LastActivityDate="2016-12-03T19:44:23.483" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8945" PostTypeId="2" ParentId="8940" CreationDate="2016-10-29T11:33:33.843" Score="2" Body="&lt;p&gt;I can't speak to your specific issues, but Windows driver issues made me switch to elementary OS.  I went from several major, unresolvable issues to just a few minor annoyances without needing to do anything special.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before uninstalling Windows, put elementary on a thumb drive and try it out in Live CD mode.  It will run slower than when natively installed, but you can test the environment first.  Here's the support page if you need more info (you don't have to only use Rufus):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/installation#install-on-windows&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io/docs/installation#install-on-windows&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While elementary runs fine out of the box, you'll find it takes more tinkering than Windows to get everything looking and working how you prefer.  But that's kinda the point -- you can do a lot of customizing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-10-29T11:33:33.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8946" PostTypeId="1" CreationDate="2016-10-29T12:14:18.950" Score="1" ViewCount="26" Body="&lt;p&gt;I use a bluetooth keyboard, and it becomes temporarily unresponsive when I don't type for a few minutes.  Once I hit a key and wait about 10 seconds, the connection becomes live again and I can resume typing.  Is there a setting that delays when bluetooth devices are considered idle?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-10-29T12:14:18.950" Title="Can the bluetooth idle threshhold be extended?" Tags="|hardware|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8947" PostTypeId="2" ParentId="4270" CreationDate="2016-10-29T12:17:04.773" Score="0" Body="&lt;p&gt;go to system settings and enable multi touch along with two finger scrolling . then it should work fine. i am using asus ux305&lt;/p&gt;&#xA;" OwnerUserId="7137" LastActivityDate="2016-10-29T12:17:04.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8948" PostTypeId="2" ParentId="8941" CreationDate="2016-10-29T15:00:55.200" Score="4" Body="&lt;p&gt;It will be fixed in future versions, here is a workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/lib/x86_64-linux-gnu&#xA;sudo ln -s libxmlbird.so.1.3 libxmlbird.so.1.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7138" LastActivityDate="2016-10-29T15:00:55.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8949" PostTypeId="2" ParentId="8578" CreationDate="2016-10-29T17:44:43.350" Score="3" Body="&lt;p&gt;Install dconf-tools&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now start &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Goto org-&gt;pantheon-&gt;desktop-&gt;gala-&gt;shadows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change values here. Not all windows are effects. Looks like not allow windows can change shadow settigs from this location but many applications do pick up shadow settings from here&lt;/p&gt;&#xA;" OwnerUserId="6821" LastActivityDate="2016-10-29T17:44:43.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8951" PostTypeId="2" ParentId="3511" CreationDate="2016-10-29T19:42:28.830" Score="1" Body="&lt;p&gt;If you're here about a stuck logo, skip past the divider. To quickly address the OP's questions, you shouldn't have to wait longer than a few minutes at the elementary logo screen, and certainly an hour would be too long even if it's loading on an old computer. Usually this would indicate some sort of bug with the installer, which you should report/track at &lt;a href=&quot;https://bugs.launchpad.net/elementaryos&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos&lt;/a&gt; You can also test whether other live USB distros (e.g., Ubuntu) load on your system and whether yours is an elementary or hardware issue. If you have multiple operating systems on your computer, you might want to try the &lt;code&gt;boot-repair&lt;/code&gt; live USB linked below to repair your boot grub. But on diagnosing a stuck logo:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The stuck logo is one of those indeterminate situations without a clear solution, but chances are pretty good that something is hanging in the background.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot to your grub screen (picture below)—it either loads automatically if you have multiple operating systems, or hold down &lt;kbd&gt;shift&lt;/kbd&gt; during boot (&lt;a href=&quot;https://askubuntu.com/q/16042/49899&quot;&gt;more info&lt;/a&gt;)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2DomW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2DomW.png&quot; alt=&quot;grub&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;e&lt;/kbd&gt; on your elementary entry to edit its parameters&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;At the end of the &quot;Linux&quot; line, &lt;strong&gt;remove &lt;code&gt;quiet splash&lt;/code&gt;&lt;/strong&gt;, which will unhide the usual startup notices (&lt;code&gt;quiet&lt;/code&gt;) and will show that text instead of the splash page (the glowing &quot;e&quot;). I also recommend adding &lt;code&gt;nomodeset&lt;/code&gt; to that line. Usually you can just kill all of the parameters at the end of the line &lt;a href=&quot;https://askubuntu.com/q/38780/49899&quot;&gt;so it just says &lt;code&gt;ro nomodeset&lt;/code&gt;&lt;/a&gt;. Don't worry about screwing up—these changes are only used for this boot and not saved. Press &lt;kbd&gt;F10&lt;/kbd&gt; to continue booting.&lt;/li&gt;&#xA;&lt;li&gt;If you see an error, Google it—that's the real perpetrator. If you're not seeing the boot text, your options are to (a) continue playing around with those grub boot parameters, (b) boot into recovery mode from grub to play around with your graphics card drivers and kernels as those are likely at fault, or (c) &lt;a href=&quot;https://sourceforge.net/p/boot-repair-cd/home/Home/&quot; rel=&quot;nofollow noreferrer&quot;&gt;run a &lt;code&gt;boot-repair&lt;/code&gt; live USB&lt;/a&gt; to rebuild your grub. I found that I needed to do a combination of the three, but you'll only be able to get more help if you can diagnose the error behind the stuck logo.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-10-31T22:33:29.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8952" PostTypeId="1" CreationDate="2016-10-29T19:52:42.073" Score="4" ViewCount="2472" Body="&lt;p&gt;Got elementary OS installed today on a desktop PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Got the latest NVIDIA drivers installed, and I noticed that if the screen goes blank (after a few minutes inactivity ), when I log back in I have some weird artifacts in the background. Same happened once when I restarted the computer after being in Windows (I have dual boot)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dWRlB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dWRlB.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect somehow the graphics card memory is corrupted when I use elementary, because in the reboot situation I could see fragments from the windows session within those artifacts!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The card is a new GTX 1060 that I have for almost a month now, it works fine with all games in Win10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone aware of what the problem may be?&lt;/p&gt;&#xA;" OwnerUserId="7145" LastEditorUserId="9" LastEditDate="2016-10-29T20:57:47.637" LastActivityDate="2018-02-12T20:35:45.853" Title="Artifacts in background" Tags="|graphic-drivers|nvidia|" AnswerCount="5" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="8953" PostTypeId="2" ParentId="8933" CreationDate="2016-10-29T21:13:43.327" Score="0" Body="&lt;p&gt;So I just update appcenter to version 0.1.2 that was released today. So far it's working ok. Thanks for the replys.&lt;/p&gt;&#xA;" OwnerUserId="7128" LastActivityDate="2016-10-29T21:13:43.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8955" PostTypeId="2" ParentId="8244" CreationDate="2016-10-30T00:25:20.750" Score="4" Body="&lt;p&gt;It is clearly related to pantheon-files, or at least in the file-chooser dialog.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, if nautilus is defined as default file-manager in elementary os loki, firefox will display correct behaviour when saving a file: nautilus-file-chooser shows up with last used directory path remembered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand it's just a workaround, but it reveals the issue is specific to elementary loki pantheon-files.&lt;/p&gt;&#xA;" OwnerUserId="7147" LastEditorUserId="-1" LastEditDate="2016-10-30T00:39:13.453" LastActivityDate="2016-10-30T00:39:13.453" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8956" PostTypeId="1" CreationDate="2016-10-30T02:46:02.670" Score="12" ViewCount="6000" Body="&lt;p&gt;When I open qBittorrent or calibre they show for a moment in the dock and then go away. I am using &lt;strong&gt;qBittorrent v3.3.1&lt;/strong&gt; which is in the official repository and &lt;strong&gt;calibre v2.70&lt;/strong&gt; which I downloaded from calibre website. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched around and found two questions relevant to my problem. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2606/something-strange-going-on-with-plank&quot;&gt;This question&lt;/a&gt; is similar but the solution does not work for me. I already had the &lt;strong&gt;Show Unpinned&lt;/strong&gt; option ticked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/one-of-my-apps-has-a-second-fuzzy-icon-in-plank-how-can-i-workaround-this&quot;&gt;This question &lt;/a&gt; deals with multiple icons of same application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a workaround for qBittorrent. There is a qBittorrent icon at the top when it is running. Clicking on this icon brings up a menu with a option &lt;strong&gt;Hide&lt;/strong&gt;. Clicking &lt;strong&gt;Hide&lt;/strong&gt; twice in this menu brings back qBittorrent icon in plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The list of softwares seems to be growing. Now mousepad and virtualbox also do not show up in the dock.&lt;/p&gt;&#xA;" OwnerUserId="7149" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2019-02-06T13:37:19.970" Title="Certain application icons does not show up in dock when opened" Tags="|applications|plank|icons|" AnswerCount="4" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="8957" PostTypeId="2" ParentId="8952" CreationDate="2016-10-30T06:25:20.590" Score="1" Body="&lt;p&gt;I had this desktop artifacting with &lt;code&gt;nvidia-367&lt;/code&gt; but it went away when I updated to &lt;code&gt;nvidia-370&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The drivers are still a mess and I still get the artifacting briefly after resuming (with Windows assets, like you mentioned), but the desktop artifacting appears to be over. That's a driver bug, if you find the open ticket (Google is littered with mentions of Nvidia artifacting issues).&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-30T06:25:20.590" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="8958" PostTypeId="1" AcceptedAnswerId="8962" CreationDate="2016-10-30T11:55:05.943" Score="0" ViewCount="243" Body="&lt;p&gt;i'm new on Linux with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to install Skype, Steam and Wine but i can't install these.&#xA;When i try to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install skype&#xA;sudo apt-get install steam&#xA;sudo apt-get install wine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm getting this errors:&#xA;&lt;a href=&quot;http://hastebin.com/hegejuhiyu.sql&quot; rel=&quot;nofollow&quot;&gt;http://hastebin.com/hegejuhiyu.sql&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can i install this programs?&lt;/p&gt;&#xA;" OwnerUserId="7150" LastActivityDate="2016-10-30T13:50:03.627" Title="Installing Skype, Steam, Wine problems" Tags="|wine|steam|skype|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8959" PostTypeId="1" CreationDate="2016-10-30T12:04:01.783" Score="0" ViewCount="174" Body="&lt;p&gt;I am having an issue with my ASUS F556U laptop touchpad - changes I make in touchpad settings have no effect, I cannot turn tap-to-click off and scrolling doesn't work, no matter what I do.&#xA;So I have tried playing with xipunt. xinput list returns:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ FTE1001:00 0B05:0101                      id=11   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=8    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=9    [slave  keyboard (3)]&#xA;    ↳ USB Camera                                id=10   [slave  keyboard (3)]&#xA;    ↳ Asus WMI hotkeys                          id=12   [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=13   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To me it seems that FTE1001... is my touchpad, so I tried using xinput list-props 11 to get available settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device 'FTE1001:00 0B05:0101':&#xA;    Device Enabled (139):   1&#xA;    Coordinate Transformation Matrix (141): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&#xA;    libinput Accel Speed (276): 0.000000&#xA;    libinput Accel Speed Default (277): 0.000000&#xA;    libinput Accel Profiles Available (278):    1, 1&#xA;    libinput Accel Profile Enabled (279):   1, 0&#xA;    libinput Accel Profile Enabled Default (280):   1, 0&#xA;    libinput Natural Scrolling Enabled (281):   0&#xA;    libinput Natural Scrolling Enabled Default (282):   0&#xA;    libinput Send Events Modes Available (260): 1, 0&#xA;    libinput Send Events Mode Enabled (261):    0, 0&#xA;    libinput Send Events Mode Enabled Default (262):    0, 0&#xA;    libinput Left Handed Enabled (283): 0&#xA;    libinput Left Handed Enabled Default (284): 0&#xA;    libinput Scroll Methods Available (285):    0, 0, 1&#xA;    libinput Scroll Method Enabled (286):   0, 0, 0&#xA;    libinput Scroll Method Enabled Default (287):   0, 0, 0&#xA;    libinput Button Scrolling Button (288): 0&#xA;    libinput Button Scrolling Button Default (289): 0&#xA;    Device Node (263):  &quot;/dev/input/event12&quot;&#xA;    Device Product ID (264):    2821, 257&#xA;    libinput Drag Lock Buttons (290):   &amp;lt;no items&amp;gt;&#xA;    libinput Horizonal Scroll Enabled (265):    1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried setting Scroll Methods Enabled to 0,0,1 too, it had no effect on scrolling (though I'm unsure about which value being what method).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I would like is to turn tap-to-click off and get the scrolling working, but I don't know what to do next. &lt;/p&gt;&#xA;" OwnerUserId="6800" LastEditorDisplayName="user212" LastEditDate="2017-10-17T06:17:20.743" LastActivityDate="2024-03-18T07:06:05.693" Title="No tap-to-click setting for ASUS F556 touchpad on eOS Loki" Tags="|touchpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8960" PostTypeId="2" ParentId="7885" CreationDate="2016-10-30T12:53:37.027" Score="0" Body="&lt;p&gt;I found an alternative solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a Slingshot Launcher fork call &lt;strong&gt;Panther Launcher&lt;/strong&gt;. It looks and works exactly the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is faster and it does not depend on Gala or Granite.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;&lt;a href=&quot;http://www.rastersoft.com/programas/panther_launcher.html&quot; rel=&quot;nofollow&quot;&gt;http://www.rastersoft.com/programas/panther_launcher.html&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Download the &lt;strong&gt;Ubuntu 64 bit&lt;/strong&gt; version and install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then open &lt;strong&gt;System Settings - Desktop - Hot Corners&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select the &lt;strong&gt;top left corner&lt;/strong&gt; and choose &lt;strong&gt;Execute Custom Command&lt;/strong&gt; and set it to&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;panther_launcher&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then go back to &lt;strong&gt;System Settings - Keyboard - Custom&lt;/strong&gt; and add a new shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;strong&gt;first time&lt;/strong&gt; you launch Panther &lt;strong&gt;might freeze&lt;/strong&gt; but try again and it will work just fine after.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to customize the amount of columns, icon size, etc. Open &lt;strong&gt;Dconf-editor&lt;/strong&gt; and go to &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;org.rastersoft.panther&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Once you finish customizing you need to &lt;strong&gt;kill&lt;/strong&gt; Panthern and launch it again.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;killall panther_launcher&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So far this is the best solution for me, I don't know why but Slingshot it is very laggy and I would love to use it by default.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2016-10-30T12:53:37.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8961" PostTypeId="2" ParentId="8887" CreationDate="2016-10-30T13:42:36.427" Score="1" Body="&lt;p&gt;Try using Synaptic package manager instead of App Center. It's a different program to manage the packages that the OS and the programs you use are composed of. In Synaptic you'll find Keepass2 and other stuff that is not included in AppCenter. To install synaptic, you can use AppCenter (just search for &quot;synaptic&quot;) or Terminal by typing: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install synaptic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have opened Synaptic you'll find a search box at the top. If you search for keepass, you'll get a list of all packages that include that term, including KeePass2 and KeePassX. To install, right-click on the preferred package and choose install in the contextual menu. This will mark the package for installation. You can then search for other (unrelated) packages you might want to install too and also mark them. To finally install everything, you have to click on the &quot;apply&quot; icon at the top of the window. Then everything you have marked for installation will be installed.&lt;/p&gt;&#xA;" OwnerUserId="3112" LastEditorUserId="3112" LastEditDate="2016-11-01T18:13:03.320" LastActivityDate="2016-11-01T18:13:03.320" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8962" PostTypeId="2" ParentId="8958" CreationDate="2016-10-30T13:50:03.627" Score="0" Body="&lt;p&gt;I had the same problem, the simple solution is:&#xA;just go to appcenter and search for gbedi package installer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to do it the hard way try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;sudo dpkg --add-architecture amd64&#xA;sudo apt-get -i /yourpathhere/skype.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-10-30T13:50:03.627" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="8964" PostTypeId="2" ParentId="8940" CreationDate="2016-10-30T14:21:29.303" Score="0" Body="&lt;p&gt;As far as my knowledge goes, the fn functionality is controlled by the keyboard and can be tweaked in the BIOS settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try this the next time you start up your computer: press the power button, spam the esc key until it says something like: &quot;Esc...pausing boot&quot;, then select BIOS settings and use your arrow keys (or on some newer system the BIOS supports mouse)to search for &quot;action keys&quot; this should give you a more detailed explanation&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-10-30T14:21:29.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8965" PostTypeId="1" CreationDate="2016-10-30T14:33:44.187" Score="0" ViewCount="883" Body="&lt;p&gt;I am currently downloading Loki and will be clean installing it tonight over Freya. This is my old parent's desktop. They get really irritated with logging in with a password. How do I do this? (Last time remember Freya forced me to generate a password.)&lt;/p&gt;&#xA;" OwnerUserId="7152" LastEditorUserId="5565" LastEditDate="2016-10-30T16:56:04.957" LastActivityDate="2016-10-31T13:49:05.057" Title="How to auto login (straight to desktop without any password)" Tags="|greeter|security|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8967" PostTypeId="2" ParentId="8965" CreationDate="2016-10-30T16:57:34.370" Score="1" Body="&lt;p&gt;In the &lt;code&gt;Settings&lt;/code&gt; app there is a &lt;code&gt;User Accounts&lt;/code&gt; panel, which contains a &quot;Log In automatically&quot; toggle:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DF4FN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DF4FN.png&quot; alt=&quot;User Accounts&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure whether the installer forces you to create a password, but it's important as a basic form of security.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-10-30T16:57:34.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8968" PostTypeId="2" ParentId="8952" CreationDate="2016-10-30T18:42:00.357" Score="0" Body="&lt;p&gt;I have the same issue after waking from sleep on a GTX 970. While I haven't found a permanent fix, opening up the System Preferences and setting your desktop picture (even to the one it's already set to) will clear it up.&lt;/p&gt;&#xA;" OwnerUserId="7154" LastActivityDate="2016-10-30T18:42:00.357" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8969" PostTypeId="1" CreationDate="2016-10-30T20:22:54.717" Score="0" ViewCount="56" Body="&lt;p&gt;I've installed MS Office 2010 using CrossOver, before super + E was bound to open &lt;code&gt;home folder&lt;/code&gt; but now when I press super + e its opening MS Excel. How to unbind the MS Excel?&lt;/p&gt;&#xA;" OwnerUserId="7080" LastActivityDate="2016-12-30T16:13:10.390" Title="unbind excel on super + e keyboard shortcut" Tags="|release-loki|keyboard-shortcuts|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8970" PostTypeId="1" CreationDate="2016-10-30T22:08:19.873" Score="6" ViewCount="1099" Body="&lt;p&gt;Can I pay with PayPal to download elementary OS ?&lt;/p&gt;&#xA;" OwnerUserId="7158" LastEditorUserId="26" LastEditDate="2017-04-07T13:23:30.027" LastActivityDate="2017-04-07T13:23:30.027" Title="Can I pay with PayPal to download elementary OS?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8971" PostTypeId="2" ParentId="8970" CreationDate="2016-10-30T23:48:14.460" Score="6" Body="&lt;p&gt;The way to download and pay with Paypal is at the moment (October, 31, 2016):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Download the OS typing &lt;code&gt;0&lt;/code&gt; in the &quot;Custom&quot; section; afterwards press &quot;Purchase elementary OS&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Next to this you should click the &quot;&lt;a href=&quot;https://elementary.io/en/get-involved#funding&quot; rel=&quot;nofollow noreferrer&quot;&gt;Get Involved&lt;/a&gt;&quot; section located at the upper right position of your screen. Once there you will see different options to help elementary OS. After the &quot;General Funding&quot; section you have Paypal.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I hope elementary team will include Paypal in the Download area besides Card and Bitcoin as lots of users employ this payment method.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="26" LastEditDate="2017-04-07T13:22:31.053" LastActivityDate="2017-04-07T13:22:31.053" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8974" PostTypeId="2" ParentId="8440" CreationDate="2016-10-31T12:07:30.883" Score="0" Body="&lt;p&gt;&lt;code&gt;sudo dpkg -i --force-overwrite /var/cache/apt/archives/appstream-data-pantheon-loki-stable_0.4+r13~ubuntu0.4.1_all.deb&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7165" LastEditorUserId="26" LastEditDate="2016-11-01T18:51:42.303" LastActivityDate="2016-11-01T18:51:42.303" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8975" PostTypeId="1" AcceptedAnswerId="8999" CreationDate="2016-10-31T13:03:44.733" Score="1" ViewCount="1271" Body="&lt;p&gt;I'm trying to configure the language of elementary 0.4 in settings panel, but a message with yellow background keeps asking to &quot;complete the installation&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I click on this button &quot;complete the installation&quot;, but if I logout, this message is still there...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Picture : &lt;a href=&quot;https://i.stack.imgur.com/adOS4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/adOS4.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix that ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks =)&lt;/p&gt;&#xA;" OwnerUserId="7164" LastActivityDate="2016-11-01T15:54:42.673" Title="Language settings" Tags="|system|language|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8976" PostTypeId="2" ParentId="8965" CreationDate="2016-10-31T13:49:05.057" Score="0" Body="&lt;p&gt;Actually, the installer forces you to create a password but you can choose to login without entering a password on the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you will have to enter your password to install upgrades or do other system administration tasks.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-31T13:49:05.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8977" PostTypeId="1" AcceptedAnswerId="8981" CreationDate="2016-10-31T14:09:56.323" Score="6" ViewCount="1109" Body="&lt;p&gt;ElementaryOS is based on Ubuntu. Does it mean ElementaryOS is fully compatible with Ubuntu applications? (I suppose my question could be &quot;Are Ubuntu and ElementaryOS binary compatible?&quot;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By applications, I mean third party software that explicitly support Ubuntu, most of the time not open source, and not in the package repo, which are obtained as binaries, can be native x64, java, anything)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or I might have dependencies issues, or the way the root filesystem is layed out differs between ElementaryOS and Ubuntu?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am basically looking to switch from my Arch distro which is not officially supported and I want something reliable for work, without tweaking endlessly every time I want to run a proprietary app (that explicitly supports Ubuntu).&lt;/p&gt;&#xA;" OwnerUserId="7167" LastEditorUserId="7167" LastEditDate="2016-10-31T14:18:23.120" LastActivityDate="2016-10-31T14:40:40.310" Title="Compatibility with Ubuntu" Tags="|ubuntu|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8978" PostTypeId="2" ParentId="8977" CreationDate="2016-10-31T14:22:22.690" Score="1" Body="&lt;p&gt;Yes, ElemeentaryOS uses the same Ubuntu repositories. You can think of elemenetaryOS as an un-official Ubuntu flavor, like Kubuntu, Xubuntu and such. You can use any PPA or package meant for Ubuntu. &lt;/p&gt;&#xA;" OwnerUserId="6506" LastActivityDate="2016-10-31T14:22:22.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8979" PostTypeId="1" CreationDate="2016-10-31T14:39:19.087" Score="1" ViewCount="53" Body="&lt;p&gt;During installation from USB stick on W10 machine, &lt;a href=&quot;https://i.stack.imgur.com/ac0uS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ac0uS.jpg&quot; alt=&quot;I do not see this screen:&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rather, it skips right to the partition creation screen and clicking &quot;change&quot; or &quot;+&quot; or &quot;add partition&quot; just makes the installation hang. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tony&lt;/p&gt;&#xA;" OwnerUserId="7168" LastActivityDate="2016-11-21T09:05:53.620" Title="Not being prompted to &quot;Erase Disk and Install eOS&quot; during setup" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8981" PostTypeId="2" ParentId="8977" CreationDate="2016-10-31T14:40:40.310" Score="2" Body="&lt;p&gt;Actually the answer is more of &quot;yes and no&quot;. There is a lot of system libraries that has been specifically modified for the elementary OS look &amp;amp; feel (libgtk, etc.). You can install any Ubuntu or even third party applications most of the time, however.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find some more information (it is about PPAs but might be applicable to other third party apps as well) at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17/can-i-safely-install-any-ppa-for-ubuntu-on-elementary?rq=1&quot;&gt;Can I safely install any PPA for Ubuntu on elementary?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-10-31T14:40:40.310" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8982" PostTypeId="2" ParentId="8969" CreationDate="2016-10-31T15:11:51.690" Score="1" Body="&lt;p&gt;You can simply rebind the keyboard shortcut to open your home folder. This will automatically disable the other one.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-10-31T15:11:51.690" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8983" PostTypeId="1" AcceptedAnswerId="8990" CreationDate="2016-10-31T18:43:23.293" Score="0" ViewCount="662" Body="&lt;p&gt;Trying to install Loki (aka elementary 0.4) on a mac mini.  The experience is proving rather less straightforward than the &lt;a href=&quot;https://elementary.io/docs/installation#download-elementary-os&quot; rel=&quot;nofollow&quot;&gt;installation instructions&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The machine is a mac mini (&lt;code&gt;Macmini4,1&lt;/code&gt; - mid 2010) running OSX El Capitan (10.11.3).  I want to dual boot osx &amp;amp; loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Steps so far:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Shrunk the main partition (&lt;code&gt;Macintosh HD&lt;/code&gt;), creating 80GB unformatted space&lt;/li&gt;&#xA;&lt;li&gt;Tried to install &lt;a href=&quot;https://sourceforge.net/projects/refind/files/&quot; rel=&quot;nofollow&quot;&gt;rEFInd&lt;/a&gt;.  It stopped with warning that System Integrity Protection was on, so install not recommended.  Tried again from the recovery partition (as advised), same result.  So didn't install.&lt;/li&gt;&#xA;&lt;li&gt;Booted loki into 'try it out' mode from USB drive anyway by holding down &lt;code&gt;alt&lt;/code&gt; during boot.  &lt;/li&gt;&#xA;&lt;li&gt;Launched installer.  However, it doesn't detect the osx installation.  So only choices are clean install or manual partition.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'm not averse to manual partitioning, but process so far doesn't give me a lot of confidence.  Any advice appreciated.  For example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Do I need rEFInd?  Strange that it's not mentioned in the official docs.&lt;/li&gt;&#xA;&lt;li&gt;Any reason why the installer isn't seeing the OSX partition (does it need rEFInd installed first?)&lt;/li&gt;&#xA;&lt;li&gt;If I have to manually partition, what's required?  Is it as simple as a single root partition + swap @2*RAM?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If I do it manually, should the bootloader go on &lt;code&gt;/dev/sda&lt;/code&gt; or &lt;code&gt;/dev/sda1&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="377" LastEditorUserId="377" LastEditDate="2016-10-31T21:14:52.500" LastActivityDate="2016-11-01T07:13:37.520" Title="dual boot loki + osx on mac mini" Tags="|release-loki|dual-boot|macintosh|refind|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8984" PostTypeId="2" ParentId="8887" CreationDate="2016-10-31T23:34:48.370" Score="3" Body="&lt;p&gt;There are many applications not included in AppCenter. It will be endless discussing personal choices. The developers goal is picking software that integrates well in elementary environment. In any case if you find KeePass2 a must you can try the following link: &lt;a href=&quot;https://installion.co.uk/ubuntu/xenial/universe/k/keepass2/install/index.html&quot; rel=&quot;nofollow&quot;&gt;https://installion.co.uk/ubuntu/xenial/universe/k/keepass2/install/index.html&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2016-10-31T23:34:48.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8986" PostTypeId="2" ParentId="8979" CreationDate="2016-11-01T02:39:56.090" Score="1" Body="&lt;p&gt;If this happens, you can run the live version of elementary OS, delete partitions and format drives using gparted then try again. This worked for me. &lt;/p&gt;&#xA;" OwnerUserId="7168" LastEditorUserId="578" LastEditDate="2016-11-21T09:05:53.620" LastActivityDate="2016-11-21T09:05:53.620" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8987" PostTypeId="2" ParentId="7763" CreationDate="2016-11-01T03:14:53.833" Score="0" Body="&lt;p&gt;the elementary list is in /etc/apt/sources.list.d/elementary.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the changes will be also happen in patches; /etc/apt/sources.list.d/patches.list&#xA;there are also loki Release need to be replace by xenial&lt;/p&gt;&#xA;" OwnerUserId="7174" LastActivityDate="2016-11-01T03:14:53.833" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8988" PostTypeId="1" CreationDate="2016-11-01T03:28:38.457" Score="1" ViewCount="248" Body="&lt;p&gt;Does elementary OS PGP-sign ISO downloads? If not, is there a good avenue for requesting this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu, Fedora, Arch, Gentoo, and more all sign their downloads with GPG and provide cryptographic signatures verifying integrity and authenticity of their installers. As a security-conscious user, this is very important to me.&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2016-11-01T14:27:11.123" Title="PGP Signatures of ISO Downloads?" Tags="|security|iso|gpg|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="8989" PostTypeId="2" ParentId="8988" CreationDate="2016-11-01T07:10:22.523" Score="1" Body="&lt;p&gt;elementary OS signs its distribution iso, cf. &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt; (for elementary OS 0.4 (loki) they used &lt;code&gt;sha256sum&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For older elementary versions you should check: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/513/how-to-verify-the-downloaded-iso-file&quot;&gt;How to verify the downloaded .iso file?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-01T14:27:11.123" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8990" PostTypeId="2" ParentId="8983" CreationDate="2016-11-01T07:13:37.520" Score="1" Body="&lt;p&gt;I run elementary on a mini. I've run dual boot and just elementary. I've always had more luck with refind than with just grub. It can be installed but you have to disable system integrity protection. OS X daily has a tutorial.&#xA;&lt;a href=&quot;http://osxdaily.com/2015/10/05/disable-rootless-system-integrity-protection-mac-os-x/&quot; rel=&quot;nofollow&quot;&gt;http://osxdaily.com/2015/10/05/disable-rootless-system-integrity-protection-mac-os-x/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for partitioning. A root partition and a swap is enough, but a /home partition can be helpful as it allows you to reinstall the os, reformat the root partition without wiping the home folder. I let the installer decide for me and it set up one root partition and a swap at 8GB. Swap seems a bit larger than I'd normally chose, but I'm not dual booting right now and not pressed for space so it's not an issue. May be more of an issue when dual booting.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-01T07:13:37.520" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8991" PostTypeId="2" ParentId="8975" CreationDate="2016-11-01T07:14:50.627" Score="1" Body="&lt;p&gt;To &quot;complete installation&quot; you have to unlock the panel with the lock button (&quot;Unlock&quot; or &quot;Déverrouiller&quot; in the french version), as this changement requires administrator rights.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-01T07:14:50.627" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="8992" PostTypeId="2" ParentId="8956" CreationDate="2016-11-01T07:50:55.803" Score="1" Body="&lt;p&gt;For Calibre go to preferences/ look and feel and enable tray icon. &#xA;That makes it stay in plank too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tried this for other apps. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-01T07:50:55.803" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8993" PostTypeId="2" ParentId="8379" CreationDate="2016-11-01T07:54:07.250" Score="0" Body="&lt;p&gt;I found this issue after trying to turn on input-feedback-sounds with dconf&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your configuration value for &lt;code&gt;org.gnome.desktop.sounds.input-feedback-sounds&lt;/code&gt; has been set to &lt;code&gt;true&lt;/code&gt; then revert this change back to &lt;code&gt;false&lt;/code&gt; to resolve the issue.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf write /org/gnome/desktop/sound/input-feedback-sounds false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7177" LastActivityDate="2016-11-01T07:54:07.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8995" PostTypeId="1" AcceptedAnswerId="9001" CreationDate="2016-11-01T13:36:20.143" Score="0" ViewCount="8321" Body="&lt;p&gt;I've used Freya before and i can install additional plank themes for example from this site: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2015/09/13-plank-themes-elementary-os-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2015/09/13-plank-themes-elementary-os-freya/&lt;/a&gt; . I tried install that and then right click on the plank with control and i had still four themes. Can I install more themes for Loki?&#xA;Thanks for help!&lt;/p&gt;&#xA;" OwnerUserId="7185" LastActivityDate="2016-11-01T16:30:35.800" Title="elementaryOS Loki - Plank themes" Tags="|release-loki|plank|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="8997" PostTypeId="1" AcceptedAnswerId="9000" CreationDate="2016-11-01T15:21:41.383" Score="0" ViewCount="276" Body="&lt;p&gt;Im not an Ace in this things and I am a beginner on Linux but I would really appreciate your help since I would love quiting for good the microsoft sh*t. I guess by the posts I read my system is not suitable for Loki (64bit) since my Processor (ATOM N450) is a 32bit x86. Is it true? On the other hand, since there is not a 32bit loki version, can I use then a previous, let's say Freya, 32 bit version? Where can I get it (download it)? &#xA;Thanks for helping this argentine elementary ignorant.&#xA;Regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fernando&lt;/p&gt;&#xA;" OwnerUserId="7187" LastActivityDate="2016-12-01T16:28:51.343" Title="Loki (64 bit only) on a Acer Aspire One Ao532h (ATOM N450)" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8998" PostTypeId="2" ParentId="8079" CreationDate="2016-11-01T15:47:24.220" Score="0" Body="&lt;p&gt;You need &lt;strong&gt;xbindkeys&lt;/strong&gt; and &lt;strong&gt;dconf-editor&lt;/strong&gt;.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7628/loki-media-keys-shortcuts-volume-keys-broken&quot;&gt;Here's your solution.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7188" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-01T15:47:24.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="8999" PostTypeId="2" ParentId="8975" CreationDate="2016-11-01T15:54:42.673" Score="2" Body="&lt;p&gt;I have the same issue, to fix it unlock, select and remove each other language listed except yours with the minus symbol below the list.&lt;/p&gt;&#xA;" OwnerUserId="6962" LastActivityDate="2016-11-01T15:54:42.673" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9000" PostTypeId="2" ParentId="8997" CreationDate="2016-11-01T15:55:57.217" Score="0" Body="&lt;p&gt;Your processor supports 64-bit. It should have a better performance than windows. Backup, save your windows key in case you need to reinstall and try a live usb before installing. If it works fine, go ahead and install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:)&lt;/p&gt;&#xA;" OwnerUserId="7052" LastActivityDate="2016-11-01T15:55:57.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9001" PostTypeId="2" ParentId="8995" CreationDate="2016-11-01T16:30:35.800" Score="0" Body="&lt;p&gt;plank themes work in loki. Check your .local/share/plank/themes folder. I bet the themes aren't there. It looks like that ppa is down and the one in the comments doesn't support an ubuntu 16.04 based system. The deb link is 404 too. you can download the deb for an older system from:&#xA;&lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update/+files/elementary-plank-themes_0.4-0~4~precise1_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~versable/+archive/ubuntu/elementary-update/+files/elementary-plank-themes_0.4-0~4~precise1_all.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;open it with archive manager and extract the data file. open the data file in archive manager and extract that too. It will extract to a hidden folder .usr/... Go to the .usr and browse to the plank/themes folder and copy all the themes in that folder to .local/share/plank/themes&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-01T16:30:35.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9002" PostTypeId="1" AcceptedAnswerId="9008" CreationDate="2016-11-01T16:40:40.833" Score="0" ViewCount="886" Body="&lt;p&gt;I lost the app center in loki after doing &lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&#xA;i cant seem to locate the file  or the app.&#xA;A correct name of the package might help me install it &lt;/p&gt;&#xA;" OwnerUserId="7190" LastActivityDate="2016-11-01T23:52:38.377" Title="Lost the appcenter in Loki" Tags="|release-loki|apt|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9003" PostTypeId="2" ParentId="9002" CreationDate="2016-11-01T16:54:36.120" Score="0" Body="&lt;p&gt;Its just appcenter I verified with dpkg -L appcenter and looked in synaptics where it also shows up as appcenter.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-01T16:54:36.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9004" PostTypeId="1" CreationDate="2016-11-01T16:57:23.473" Score="2" ViewCount="627" Body="&lt;p&gt;Everything was working perfectly until some days ago, but now every time I open the spotify app the wingpanel crashes. I'm not sure if it was an update on spotify itself or something within Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Syslog shows this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Nov  1 12:49:15 saitama kernel: [11051.128510] wingpanel[5958]: segfault at 38 ip 00007fefabb5be2b sp 00007ffe7ca147a0 error 4 in libsound.so[7fefabb4b000+27000]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Elementary version: Loki&lt;br&gt;&#xA;Spotify version: 1:1.0.38.171.g5e1cd7b2-22&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to uninstall and reinstall spotify already, even tried the &lt;code&gt;0.9.17&lt;/code&gt; version with the same effects. Also tried to uninstall some indicator apps, but nothing solved it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to know if anyone else has the same issue or if someone has any ideas of what could be happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to install other versions of spotify? I've tried &lt;code&gt;sudo apt install spotify-client=1:1.0.37.152.gc83ea995-42&lt;/code&gt;, but it couldn't find that version...&lt;/p&gt;&#xA;" OwnerUserId="7182" LastActivityDate="2016-11-28T16:46:11.837" Title="Spotify crashing the wingpanel (loki)" Tags="|release-loki|wingpanel|crash|spotify|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9005" PostTypeId="1" CreationDate="2016-11-01T19:30:21.090" Score="1" ViewCount="638" Body="&lt;p&gt;Is it possible to have the onscreen keyboard appear on the login screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried this in Ubuntu 16 today and it shows the onscreen keyboard on the login screen.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Version: Loki (64 bit)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Computer: Acer Switch Alpha 12&lt;/p&gt;&#xA;" OwnerUserId="7191" LastEditorUserId="7191" LastEditDate="2016-11-01T20:35:09.423" LastActivityDate="2016-11-01T20:35:09.423" Title="Is itpossible to have an onscreen keyboard on the login screen" Tags="|touchscreen|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9006" PostTypeId="2" ParentId="6661" CreationDate="2016-11-01T19:48:44.800" Score="0" Body="&lt;p&gt;I have a same trouble.&#xA;You don't note what kind of OS you use (Freya, Loki or something else). But you have to know there is no support for the xbox-one gamepad in ubuntu-based OS with kernel earlier than 4.5.&#xA;I have install kernel 4.8.5 (following &lt;a href=&quot;http://linuxg.net/install-kernel-4-8-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; howto) and it's start working but only in Steam (Big Picture).&#xA;My question is &lt;a href=&quot;https://unix.stackexchange.com/questions/320377/xbox-one-controller-is-working-in-steam-but-is-not-working-in-games&quot;&gt;here&lt;/a&gt;.&#xA;Please, try to get the kernel later than 4.5 and wright about the result.&lt;/p&gt;&#xA;" OwnerUserId="7194" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-11-01T19:48:44.800" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9008" PostTypeId="2" ParentId="9002" CreationDate="2016-11-01T23:52:38.377" Score="0" Body="&lt;p&gt;I can't figure out how apt-get autoremove had anything to do with the disappearance of appcenter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The man-page for apt-get claims the autoremove command &quot; is used to remove packages that were automatically installed to satisfy dependencies for other packages and are now no longer needed.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Researching in the web one can see some users that reported problems by using apt-get autoremove though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If appcenter has been uninstalled anyhow, you should type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install appcenter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2016-11-01T23:52:38.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9010" PostTypeId="2" ParentId="9004" CreationDate="2016-11-02T00:34:35.453" Score="2" Body="&lt;p&gt;So, I've found the culprit!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;wingpanel-indicator-sound&lt;/code&gt; version &lt;code&gt;2.0.3&lt;/code&gt; is the one that's crashing and thus making the entire wingpanel disappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Removing the package is a temporary solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already submitted a bug report on the wingpanel-indicator-sound project page.&lt;/p&gt;&#xA;" OwnerUserId="7182" LastActivityDate="2016-11-02T00:34:35.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9011" PostTypeId="1" CreationDate="2016-11-02T03:53:50.293" Score="1" ViewCount="586" Body="&lt;p&gt;How can I play RuTube videos?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the link to the site, its a Russian version of YouTube.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://rutube.ru&quot; rel=&quot;nofollow noreferrer&quot;&gt;RuTube&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The videos on this site won't play using Chromium or Firefox browsers. They play on my phone using Chrome browser.&lt;/p&gt;&#xA;" OwnerUserId="7199" LastEditorUserId="7199" LastEditDate="2016-11-03T02:49:44.243" LastActivityDate="2021-09-14T08:02:20.000" Title="How Do I Get RuTube.ru To Play Videos?" Tags="|google-chrome|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9012" PostTypeId="1" CreationDate="2016-11-02T04:32:26.477" Score="0" ViewCount="590" Body="&lt;p&gt;Is there a public vagrant box available for Elementary OS Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't find it on &lt;a href=&quot;https://atlas.hashicorp.com/boxes/search?utf8=%E2%9C%93&amp;amp;sort=&amp;amp;provider=&amp;amp;q=elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;vagrant cloud&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7200" LastActivityDate="2017-01-01T20:05:04.457" Title="Is there a public vagrant box available for Elementary OS Loki?" Tags="|system-installation|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9014" PostTypeId="1" CreationDate="2016-11-02T11:19:49.877" Score="2" ViewCount="2107" Body="&lt;p&gt;Noob here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just installed elementaryOS for the first time. Yay!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to fire up a text editor. No go. Vim shows as being installed in the App Center. But it does not show up under the &quot;Applications&quot; menu, and launching it from the command line says it can't be found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I uninstalled it and installed it again. Same deal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I uninstalled and resinstalled the app center. Same deal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did an &quot;apt update&quot; and reboot. Again, no vim.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Poked around in the file system looking at the usual bin directories. No vim.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing?&lt;/p&gt;&#xA;" OwnerUserId="7203" LastActivityDate="2017-11-04T09:08:59.680" Title="How does one run Vim from a new install?" Tags="|appcenter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9017" PostTypeId="1" CreationDate="2016-11-02T12:59:47.253" Score="1" ViewCount="87" Body="&lt;p&gt;Is there a common bug or reason that export from calendar should not work? The .ics file simply does not appear anywhere. Also, when I attempt to email a .ics file with calendar the system cannot find the /tmp/calendar.ics file. Is this a common problem? Is there a fix?&lt;/p&gt;&#xA;" OwnerUserId="7204" LastActivityDate="2017-01-11T10:58:32.397" Title="When I attempt to export a calendar, nothing at all happens." Tags="|calendar|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-14T19:48:52.923" ContentLicense="CC BY-SA 3.0" />
  <row Id="9018" PostTypeId="1" CreationDate="2016-11-02T14:10:30.253" Score="2" ViewCount="977" Body="&lt;p&gt;I'm looking to install the Cinnamon DE (which is default under Linux Mint) on my machine running Loki. How can I do this?&lt;/p&gt;&#xA;" OwnerUserId="7160" LastActivityDate="2019-07-06T01:34:50.107" Title="How can I install Cinnamon on Loki?" Tags="|release-loki|desktop|user-interface|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9019" PostTypeId="2" ParentId="9014" CreationDate="2016-11-02T15:03:31.023" Score="1" Body="&lt;p&gt;You can run Vim with &lt;code&gt;vi&lt;/code&gt; from the command line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is no icon in the menu indeed, not even after installing the &lt;code&gt;gvim&lt;/code&gt; package… so you might want to &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+filebug&quot; rel=&quot;nofollow noreferrer&quot;&gt;file a bug report&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-02T15:03:31.023" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9020" PostTypeId="2" ParentId="9014" CreationDate="2016-11-02T15:56:11.447" Score="2" Body="&lt;p&gt;Steps to resolve this issue:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;ignore AppCenter. Install vim-gnome from the command line.&lt;/li&gt;&#xA;&lt;li&gt;install &quot;Menu Editor&quot; from the AppCenter. The Menu Editor icon will show up Slingshot (the &quot;Applications&quot; menu).&lt;/li&gt;&#xA;&lt;li&gt;Fire up the Menu Editor and select GVim.&lt;/li&gt;&#xA;&lt;li&gt;Enable the &quot;Hide from menus&quot; switch. Exit the Menu Editor and Save changes.&lt;/li&gt;&#xA;&lt;li&gt;Fire up Menu Editor again. Select GVim again, and this time &lt;strong&gt;deselect&lt;/strong&gt; the &quot;Hide from menus&quot; switch.&lt;/li&gt;&#xA;&lt;li&gt;Exit Menu Editor, saving changes.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;GVim now appears in the Applications folder.&lt;/p&gt;&#xA;" OwnerUserId="7203" LastActivityDate="2016-11-02T15:56:11.447" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9021" PostTypeId="1" CreationDate="2016-11-02T16:22:40.693" Score="1" ViewCount="53" Body="&lt;p&gt;I have elementary OS Loki, many time I do not get some buttons in dialogue boxes ( like 'Save', 'OK', 'Extract' ). How do I fix this ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GaCkq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GaCkq.jpg&quot; alt=&quot;Screenshot 1 is showing Archive manager&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Bcyx4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Bcyx4.jpg&quot; alt=&quot;Can not see Extract button&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7073" LastActivityDate="2016-11-02T16:22:40.693" Title="Why I am not getting extract button in archive manager?" Tags="|release-loki|applications|window-management|" AnswerCount="0" CommentCount="1" ClosedDate="2016-11-23T11:28:47.323" ContentLicense="CC BY-SA 3.0" />
  <row Id="9023" PostTypeId="2" ParentId="9012" CreationDate="2016-11-02T18:23:10.960" Score="1" Body="&lt;p&gt;The &lt;a href=&quot;https://atlas.hashicorp.com/TimWSpence/boxes/elementaryos&quot; rel=&quot;nofollow noreferrer&quot;&gt;TimWSpence/elementaryos&lt;/a&gt; box appears to be running Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can probably tell, Vagrant boxes are not maintained by the elementary OS team and may not be updated as new releases come out.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-02T18:23:10.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9024" PostTypeId="1" AcceptedAnswerId="9044" CreationDate="2016-11-02T19:32:37.017" Score="0" ViewCount="1002" Body="&lt;p&gt;new to linux systems here and thought of giving elementary os a try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything going good so far, but i've encountered a problem with Steam.&#xA;I cannot seem to run it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded the deb package from the official webite and ran it with gdebi, which sucessfully installed, but whenever i try to run it, the steam icon shows up, on the dock for a brief second and then it vanishes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When using the terminal to run it, I get the following error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://jpst.it/O_Ne&quot; rel=&quot;nofollow noreferrer&quot;&gt;Click Here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2830" LastActivityDate="2019-10-26T07:01:20.487" Title="Steam does not run" Tags="|steam|games|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9025" PostTypeId="2" ParentId="9024" CreationDate="2016-11-02T21:02:12.157" Score="0" Body="&lt;p&gt;&lt;strong&gt;Never&lt;/strong&gt; install Steam from the .deb file in their website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm going to explain you how you have to install Steam, but first you need to remove the current Steam you have installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove it, go to the .deb package you have downloaded and open it again with gdebi. Then click on remove.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install steam you have various ways:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1º Go to the AppCentre, type Steam, and install it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2º Open a terminal and type &lt;code&gt;sudo apt install steam&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-02T21:02:12.157" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9026" PostTypeId="1" CreationDate="2016-11-02T23:44:18.457" Score="2" ViewCount="1116" Body="&lt;p&gt;As you can see in the picture below, I'm using Ubuntu with the Pantheon theme (from the Elementary OS). I can't seem to find an answer for my problem: I want to change the buttons (close, maximize and minimize) to the right corner of the screen and that is having no effect in here. Also, I seem to have a button (on the right side) that seems like the close button but it's not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help please?&lt;a href=&quot;https://i.stack.imgur.com/iUvlX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iUvlX.png&quot; alt=&quot;See the image here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7213" LastActivityDate="2016-11-02T23:44:18.457" Title="Dconf Editor problem - no changes" Tags="|pantheon|dconf|minimize|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="9027" PostTypeId="1" AcceptedAnswerId="9040" CreationDate="2016-11-02T23:45:25.153" Score="2" ViewCount="1429" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8gERK.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8gERK.jpg&quot; alt=&quot;remove date and time&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I want to do is hide the date and time from the center of wingpanel, I circled the location of the date and time for reference. I don't think it looks ugly or anything I just don't feel the need to have it displayed. Any help would be much appreciated, thanks!&lt;/p&gt;&#xA;" OwnerUserId="6035" LastActivityDate="2018-02-17T03:18:57.880" Title="Is there a way to remove the date and time from wingpanel in Loki?" Tags="|release-loki|time|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9028" PostTypeId="1" AcceptedAnswerId="9029" CreationDate="2016-11-03T01:02:25.380" Score="0" ViewCount="509" Body="&lt;p&gt;Ive been trying to get vnc or rdp working. Ive installed vncserver, and I can connect fine. But when I do all I get is a blank grey screen. Any ideas what Im missing? Or is there another prefered rdp/vnc setup?&lt;/p&gt;&#xA;" OwnerUserId="7183" LastActivityDate="2016-11-03T03:05:10.933" Title="Vnc / rdp grey screen" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9029" PostTypeId="2" ParentId="9028" CreationDate="2016-11-03T03:05:10.933" Score="0" Body="&lt;p&gt;Have you considered nomachine? &lt;a href=&quot;https://www.nomachine.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.nomachine.com&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is my go to for setting up screen share on computers. It works on Linux,  Mac,  Windows and requires almost no setup. Also lets you hear audio from the remote system.  If you prefer open source there is OpenNX,  same tech as nomachine,  but for easy of setup,  I just use nomachine.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-03T03:05:10.933" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9030" PostTypeId="2" ParentId="9011" CreationDate="2016-11-03T04:09:13.920" Score="1" Body="&lt;p&gt;Go to terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install adobe-flashplugin&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, the videos will play.&lt;/p&gt;&#xA;" OwnerUserId="7199" LastEditorUserId="26" LastEditDate="2016-11-13T02:20:27.370" LastActivityDate="2016-11-13T02:20:27.370" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9031" PostTypeId="1" CreationDate="2016-11-03T06:13:48.673" Score="1" ViewCount="325" Body="&lt;p&gt;is there a way to change the display length of notifications in loki? I would like to see the notifications for a little longer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Andreas&lt;/p&gt;&#xA;" OwnerUserId="7215" LastActivityDate="2016-12-06T18:55:59.607" Title="Notification display length in loki" Tags="|release-loki|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9034" PostTypeId="1" AcceptedAnswerId="9179" CreationDate="2016-11-03T12:36:19.790" Score="1" ViewCount="201" Body="&lt;p&gt;I install Loki a week ago and everything was working well. Suddenly I got a message about the crash of the Mail app. I killed it and I wasn't able to launch it. I restart my PC and it's the same now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system is up to date.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-mail --version&#xA;&#xA;(pantheon-mail:6732): GLib-WARNING **: g_set_application_name() called multiple times&#xA;pantheon-mail 1.0.3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What can I do ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reinstall it and it crash again. I just launch it from CLI and I got this error.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(pantheon-mail:3958): Gdk-ERROR **: The program 'pantheon-mail' received an X Window System error.&#xA;This probably reflects a bug in the program.&#xA;The error was 'BadAlloc (insufficient resources for operation)'.&#xA;  (Details: serial 4298 error_code 11 request_code 53 (core protocol) minor_code 0)&#xA;  (Note to programmers: normally, X errors are reported asynchronously;&#xA;   that is, you will receive the error a while after causing it.&#xA;   To debug your program, run it with the GDK_SYNCHRONIZE environment&#xA;   variable to change this behavior. You can then get a meaningful&#xA;   backtrace from your debugger if you break on the gdk_x_error() function.)&#xA;[1]    3958 trace trap (core dumped)  pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7016" LastEditorUserId="7016" LastEditDate="2016-11-03T12:49:33.283" LastActivityDate="2017-08-11T14:23:22.727" Title="EOS Loki Mail crash an cannot be reopen" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9035" PostTypeId="1" CreationDate="2016-11-03T16:48:22.157" Score="4" ViewCount="950" Body="&lt;p&gt;I'm new to linux and elemtaryOS, sorry for that ;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to describe my issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My wireless connection works fine, but I want to switch to wired connection because of the speed.&#xA;If I try to connect my computer with a patchcable to the router there is no connection. &#xA;I try solve the issue by myself but I have no clue. Maybe a driver issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some outputs, maybe they help.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;timo@timo-TA790GXB3:~$ sudo lshw -C network&#xA;[sudo] Passwort für timo: &#xA;  *-network               &#xA;       Beschreibung: Ethernet interface&#xA;       Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       Hersteller: Realtek Semiconductor Co., Ltd.&#xA;       Physische ID: 0&#xA;       Bus-Informationen: pci@0000:03:00.0&#xA;       Logischer Name: enp3s0&#xA;       Version: 03&#xA;       Seriennummer: 00:30:67:34:05:77&#xA;       Größe: 1Gbit/s&#xA;       Kapazität: 1Gbit/s&#xA;       Breite: 64 bits&#xA;       Takt: 33MHz&#xA;       Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-2.fw latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;       Ressourcen: irq:28 ioport:e800(Größe=256) memory:fdfff000-fdffffff memory:fdff8000-fdffbfff memory:febe0000-febfffff&#xA;  *-network&#xA;       Beschreibung: Kabellose Verbindung&#xA;       Physische ID: 1&#xA;       Bus-Informationen: usb@8:1.2&#xA;       Logischer Name: wlx10feed194d1a&#xA;       Seriennummer: 10:fe:ed:19:4d:1a&#xA;       Fähigkeiten: ethernet physical wireless&#xA;       Konfiguration: broadcast=yes driver=rtl8192cu driverversion=4.4.0-45-generic firmware=N/A ip=192.168.2.114 link=yes multicast=yes wireless=IEEE 802.11bgn&#xA;&#xA;&#xA;timo@timo-TA790GXB3:~$ ifconfig -a&#xA;enp3s0    Link encap:Ethernet  Hardware Adresse 00:30:67:34:05:77  &#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1&#xA;          RX-Pakete:488 Fehler:0 Verloren:2 Überläufe:0 Fenster:0&#xA;          TX-Pakete:0 Fehler:0 Verloren:0 Überläufe:0 Träger:0&#xA;          Kollisionen:0 Sendewarteschlangenlänge:1000 &#xA;          RX-Bytes:29877 (29.8 KB)  TX-Bytes:0 (0.0 B)&#xA;&#xA;lo        Link encap:Lokale Schleife  &#xA;          inet Adresse:127.0.0.1  Maske:255.0.0.0&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metrik:1&#xA;          RX-Pakete:8950 Fehler:0 Verloren:0 Überläufe:0 Fenster:0&#xA;          TX-Pakete:8950 Fehler:0 Verloren:0 Überläufe:0 Träger:0&#xA;          Kollisionen:0 Sendewarteschlangenlänge:1 &#xA;          RX-Bytes:697460 (697.4 KB)  TX-Bytes:697460 (697.4 KB)&#xA;&#xA;wlx10feed194d1a Link encap:Ethernet  Hardware Adresse 10:fe:ed:19:4d:1a  &#xA;          inet Adresse:192.168.2.114  Bcast:192.168.2.255  Maske:255.255.255.0&#xA;          inet6-Adresse: fe80::4494:f0f1:6020:1cc8/64 Gültigkeitsbereich:Verbindung&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metrik:1&#xA;          RX-Pakete:15621 Fehler:0 Verloren:0 Überläufe:0 Fenster:0&#xA;          TX-Pakete:15431 Fehler:0 Verloren:0 Überläufe:0 Träger:0&#xA;          Kollisionen:0 Sendewarteschlangenlänge:1000 &#xA;          RX-Bytes:10147911 (10.1 MB)  TX-Bytes:2202207 (2.2 MB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's obviously a luxury problem but it gets on my nerves.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank a lot for help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: there is syslog after connecting the lancable&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.317570] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.317584] ata2: EH complete&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.323495] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.323499] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.323502] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.323506] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.323509] ata2: hard resetting link&#xA;Dec  4 17:50:09 timo-TA790GXB3 kernel: [  768.941391] r8169 0000:03:00.0 enp3s0: link down&#xA;Dec  4 17:50:09 timo-TA790GXB3 NetworkManager[881]: &amp;lt;info&amp;gt;  [1480870209.7951] device (enp3s0): link disconnected&#xA;Dec  4 17:50:09 timo-TA790GXB3 NetworkManager[881]: &amp;lt;info&amp;gt;  [1480870209.7953] device (enp3s0): state change: disconnected -&amp;gt; unavailable (reason 'carrier-changed') [30 20 40]&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.553689] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.553702] ata2: EH complete&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.557009] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.557013] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.557016] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.557020] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:11 timo-TA790GXB3 kernel: [  770.557023] ata2: hard resetting link&#xA;Dec  4 17:50:13 timo-TA790GXB3 NetworkManager[881]: &amp;lt;info&amp;gt;  [1480870213.5373] device (enp3s0): link connected&#xA;Dec  4 17:50:13 timo-TA790GXB3 NetworkManager[881]: &amp;lt;info&amp;gt;  [1480870213.5383] device (enp3s0): state change: unavailable -&amp;gt; disconnected (reason 'carrier-changed') [20 30 40]&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.683891] r8169 0000:03:00.0 enp3s0: link up&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.781816] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.781830] ata2: EH complete&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.789116] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.789120] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.789123] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.789128] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:13 timo-TA790GXB3 kernel: [  772.789131] ata2: hard resetting link&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.017926] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.017939] ata2: EH complete&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.021237] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.021242] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.021244] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.021249] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:15 timo-TA790GXB3 kernel: [  775.021251] ata2: hard resetting link&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.246042] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.246056] ata2: EH complete&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.253348] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.253352] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.253354] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.253359] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:18 timo-TA790GXB3 kernel: [  777.253361] ata2: hard resetting link&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.478160] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.478173] ata2: EH complete&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.485465] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.485469] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.485471] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.485476] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:20 timo-TA790GXB3 kernel: [  779.485478] ata2: hard resetting link&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.710277] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.710290] ata2: EH complete&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.717581] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.717585] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.717587] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.717592] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:22 timo-TA790GXB3 kernel: [  781.717595] ata2: hard resetting link&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.942395] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.942409] ata2: EH complete&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.949699] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.949703] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.949705] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.949710] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:24 timo-TA790GXB3 kernel: [  783.949712] ata2: hard resetting link&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.174509] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.174523] ata2: EH complete&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.181816] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.181820] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.181822] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.181827] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:27 timo-TA790GXB3 kernel: [  786.181829] ata2: hard resetting link&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.402698] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.402712] ata2: EH complete&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.403326] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.403330] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.403333] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.403338] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:29 timo-TA790GXB3 kernel: [  788.403340] ata2: hard resetting link&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.618749] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.618763] ata2: EH complete&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.627464] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.627468] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.627470] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.627475] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:31 timo-TA790GXB3 kernel: [  790.627477] ata2: hard resetting link&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.866864] ata2: SATA link down (SStatus 1 SControl 310)&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.866878] ata2: EH complete&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.872786] ata2: exception Emask 0x10 SAct 0x0 SErr 0x40c0000 action 0xe frozen&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.872790] ata2: irq_stat 0x00000040, connection status changed&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.872792] ata2: SError: { CommWake 10B8B DevExch }&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.872797] ata2: limiting SATA link speed to 1.5 Gbps&#xA;Dec  4 17:50:33 timo-TA790GXB3 kernel: [  792.872799] ata2: hard resetting link&#xA;Dec  4 17:50:34 timo-TA790GXB3 gnome-session[1069]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2c0000a (syslog (/v)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7221" LastEditorUserId="7221" LastEditDate="2016-12-04T16:52:50.290" LastActivityDate="2018-12-24T21:01:40.360" Title="Wired connection doens't work (RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller)" Tags="|networking|ethernet|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9036" PostTypeId="1" AcceptedAnswerId="9038" CreationDate="2016-11-03T17:04:42.407" Score="1" ViewCount="247" Body="&lt;p&gt;I'm trying to create a launcher for an application which is not part of the App Store or repositories. I created a .desktop file in ~/.local/share/applications but when I try to run the app nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the code from the .desktop file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env xdg-open&#xA;[Desktop Entry]&#xA;Version=3.2&#xA;Name=Aptana Studio 3&#xA;GenericName=Aptana Studio 3&#xA;DBusActivatable=true&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Development;&#xA;Exec=~/.local/share/Apatana_Studio_3/./AptanaStudio3 %U&#xA;Icon=~/.local/share/Apatana_Studio_3/aptana_icon.png&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Programing;Other;&#xA;Keywords=HTML5;CSS;ColdFusion;Javascript;Develop;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So what I'm I missing?&lt;/p&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="15904" LastEditDate="2018-11-30T19:59:16.777" LastActivityDate="2018-11-30T19:59:16.777" Title="Elementary .Desktop Example?" Tags="|desktop|app-shortcuts|thirdpartyapps|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9037" PostTypeId="1" CreationDate="2016-11-03T17:05:24.057" Score="1" ViewCount="69" Body="&lt;p&gt;I have installed Loki 0.4 (64bit) and am running it successfully. However I am now experiencing problems downloading apps from the AppCenter. I successfully downloaded several apps, but now it seems as if any new requests for downloads are stuck in a queue. After selecting an app for download I encounter a &quot;Waiting for package manager lock&quot; message. I currently appear to have 5 apps attempting to download. The apps included Darktable, Gallery, gThumb, Image Viewer, and RawTherapee.&lt;/p&gt;&#xA;" OwnerUserId="3301" LastEditorUserId="26" LastEditDate="2017-01-10T17:31:16.560" LastActivityDate="2017-01-10T17:31:16.560" Title="Log jam with AppCenter" Tags="|package-management|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9038" PostTypeId="2" ParentId="9036" CreationDate="2016-11-03T17:48:42.927" Score="1" Body="&lt;p&gt;I'm not sure how you are trying to launch the app, from slingshot, from the command line?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;!/usr/bin/env xdg-open is only needed if you are trying to launch from the command line, and should have # sign in front #!/usr/bin/env xdg-open&#xA;This is old though. Used to you could chmod +x on the .desktop file and run ./nameof.desktop, but now that will just open the .desktop in your text editor. You can ditch that line. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like the problem is your command line &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=~/.local/share/Apatana_Studio_3/./AptanaStudio3 %U&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;./AptanaStudio3 is how you would run the app if you were in the terminal so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /.local/share/Apatana_Studio_3/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;./AptanaStudio3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try:&#xA; ~/.local/share/Apatana_Studio_3/AptanaStudio3 %U&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or try the easy way to do this. Install something like alacarte. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install alacarte&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It shows up in Slingshot as Main Menu. Chose a category and create a new item for your app. You can click browse next to the command line and use the file browser dialog to select AptanaStudio3. You will need to right click in the file browser dialog and chose &quot;show hidden files&quot; since the app is in a hidden file. Set the name and change the icon and you are set.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-03T17:48:42.927" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9039" PostTypeId="1" CreationDate="2016-11-03T19:01:50.263" Score="1" ViewCount="5188" Body="&lt;p&gt;I wanna install RealVNC on elementary OS!&#xA;Unfortunately I can´t find it in the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; - how is it possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot for your help!&lt;/p&gt;&#xA;" OwnerUserId="6317" LastEditorUserId="16827" LastEditDate="2019-04-13T13:38:08.207" LastActivityDate="2019-04-13T13:38:08.207" Title="Install RealVNC on elementary OS" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9040" PostTypeId="2" ParentId="9027" CreationDate="2016-11-03T19:42:36.527" Score="3" Body="&lt;p&gt;You can remove the indicator&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get remove wingpanel-indicator-datetime&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;revert it with&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install wingpanel-indicator-datetime&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-11-03T19:42:36.527" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9041" PostTypeId="2" ParentId="9039" CreationDate="2016-11-03T20:12:32.557" Score="1" Body="&lt;p&gt;It's not in the appcenter or in synaptic, which is a gui for all the sudo apt-get commands. It is on the realVNC website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The viewer: &lt;a href=&quot;https://www.realvnc.com/download/viewer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.realvnc.com/download/viewer/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The server: &lt;a href=&quot;https://www.realvnc.com/download/vnc/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.realvnc.com/download/vnc/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the .deb files. If you just want a client that connects to a display on another pc then just get the viewer. If you want to screen share into your elementary machine then get the server too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd install these with gdebi. It will look for any software that RealVNC is dependent on and install it as well. You can get gdebi from the appcenter or just run these commands in the terminal after downloading the files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install gdebi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo gdebi name_of_realvnc_viewer.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo gdebi name_of_realvnc_server.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That should get it installed. There may be some setup required after install. I haven't used Realvnc in a few years. Switched to nomachine, personal preference and ease of setup, but hopefully thats enough info to get you there.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-03T20:12:32.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9042" PostTypeId="2" ParentId="6847" CreationDate="2016-11-03T20:30:47.503" Score="2" Body="&lt;p&gt;Loki doesn't support legacy tray icons. The app has a tray icon, but it won't show up in loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My work around is to install trayer, a standalone system tray.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install trayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is very configurable. The command I run to launch it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trayer --edge bottom --transparent true --widthtype request --width 10 --expand true --align left --alpha 65&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this puts it on the bottom left corner and expands only as far as is needed for the number of icons in the tray. I tried overlaying it on wigpanel. That looks fine, but when you hover over the icons they go away and wingpanel takes the top layer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are several ways to run a command like this at boot. One easy method is to install alacarte  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will be called Main Menu in slingshot. Open it up and create a new item, a new app launcher. just put your trayer launch command in the command section and name it trayer launch or something. Then that will show up as an app in something like gnome tweak and can be set as a startup app. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="578" LastEditDate="2017-03-14T06:45:30.940" LastActivityDate="2017-03-14T06:45:30.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9043" PostTypeId="2" ParentId="4368" CreationDate="2016-11-03T21:42:03.667" Score="1" Body="&lt;p&gt;Touchegg is made for synaptic driver for&#xA;touchpads.  Loki uses libinput instead. There is a project &lt;a href=&quot;https://github.com/bulletmark/libinput&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bulletmark/libinput&lt;/a&gt; gestures &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tried it. I just installed synaptics drive and used it with xSwipe but it should work with Touchegg too. If libinput gestures doesn't work for you.  Let me know.  I kept notes on how I set up xSwipe for multi touch gestures and will gladly share them if you want.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-03T21:42:03.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9044" PostTypeId="2" ParentId="9024" CreationDate="2016-11-04T01:16:17.410" Score="0" Body="&lt;p&gt;I had this problem as well. It's an issue with a library file. It can be bypassed. These commands in the terminal fixed it for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd $HOME/.steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mv libstdc++.so.6 libstdc++.so.6.bak&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd $HOME/.steam/ubuntu12_32/steam-runtime/amd64/usr/lib/x86_64-linux-gnu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mv libstdc++.so.6 libstdc++.so.6.bak&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="17846" LastEditDate="2019-10-26T07:01:20.487" LastActivityDate="2019-10-26T07:01:20.487" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9045" PostTypeId="1" CreationDate="2016-11-04T01:28:21.193" Score="1" ViewCount="51" Body="&lt;p&gt;I installed a forked version of pantheon terminal that supports a drop down mode like guake.  I know how to exclude it from apt-get upgrade. Is there a way to exclude it from app center upgrades too? &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T01:28:21.193" Title="App center update exceptions?" Tags="|pantheon-terminal|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9047" PostTypeId="1" CreationDate="2016-11-04T04:12:47.367" Score="1" ViewCount="336" Body="&lt;p&gt;I'm running ElementaryOS Loki on a MacBook Pro which was previously running OS X 10.11.5. Now, I want to boot something (another Linux) alongside Elementary, but I can't figure out how to set up &lt;code&gt;grub&lt;/code&gt;, which isn't showing up by default on system startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried using &lt;code&gt;grub-install /dev/sda&lt;/code&gt; (with and without &lt;code&gt;--recheck&lt;/code&gt;), but all I get is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Probing devices to guess BIOS drives. This may take a long time.&#xA;sed: can't read /boot/grub/device.map: No such file or directory&#xA;grep: /boot/grub/device.map: No such file or directory&#xA;/dev/sda1 does not have any corresponding BIOS drive.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I properly set up &lt;code&gt;grub&lt;/code&gt; on my machine? I'm specifically looking for the selection menu and option to go to a &lt;code&gt;grub&lt;/code&gt; prompt on startup.&lt;/p&gt;&#xA;" OwnerUserId="7160" LastActivityDate="2019-04-25T19:01:45.347" Title="Can't get a grub prompt or menu on boot" Tags="|grub|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9048" PostTypeId="2" ParentId="9047" CreationDate="2016-11-04T05:24:25.357" Score="0" Body="&lt;p&gt;I've always had to use refind boot manager for Macs. You can install from a live boot disk/usb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.rodsbooks.com/refind/installing.html#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rodsbooks.com/refind/installing.html#linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T05:24:25.357" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="9049" PostTypeId="1" CreationDate="2016-11-04T06:27:57.677" Score="2" ViewCount="473" Body="&lt;p&gt;So I had a look in the elementary OS online accounts for a Google plugin (what you'd expect to find in Gnome Online Accounts) but there are none available - so i'm making an assumption that this plugin has yet to be finished or is in a unstable format at the moment. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to use Gnome Online Accounts (as a temporary workaround) instead? or is there a beta version of the Google Online Account plugin for elementary OS that can be installed manually?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been using Evolution for email and it looks great under Loki (though I wish it had the icons of Pantheon Mail and a few additional tweaks...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Evolution will not sync with Google Contacts as it needs OAuth02, which is what Gnome Online Accounts provides when installed (+Google Drive support). Even Gnome Contacts won't work in elementary OS as a standalone app without it (it doesn't even boot on elementary OS for some reason).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I won't use Pantheon Mail as it can not handle a large back end of email and has no contact support. Evolution is more fully featured at the moment - but needs the conversation view, a better contacts layout and a more attractive calendar week view - but it's pretty good otherwise).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any options here? I haven't been able to find answers in any of the community forums as yet.&lt;/p&gt;&#xA;" OwnerUserId="7226" LastEditorUserId="308" LastEditDate="2018-08-07T18:17:33.037" LastActivityDate="2018-08-07T18:17:33.037" Title="Google OAuth02 Online Plugin - for Goolge Contacts Sync (&amp; Google Drive?)" Tags="|release-loki|system|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9050" PostTypeId="2" ParentId="4234" CreationDate="2016-11-04T07:23:55.263" Score="0" Body="&lt;p&gt;I started to receive same problem. I used oibaf/graphics-drivers ppa. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this i've logged in through grub recovery mode, then purged that ppa&lt;/p&gt;&#xA;" OwnerUserId="760" LastActivityDate="2016-11-04T07:23:55.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9052" PostTypeId="1" AcceptedAnswerId="9063" CreationDate="2016-11-04T09:16:13.087" Score="2" ViewCount="253" Body="&lt;p&gt;I am interested in developing for elementary OS, but what's holding me back from doing so is that I can't figure out how to use the Granite widgets from C++.  I would prefer to use this instead of Vala.&lt;/p&gt;&#xA;" OwnerUserId="7232" LastActivityDate="2016-11-04T16:01:03.687" Title="Using Granite with a different language besides Vala" Tags="|applications|gtk|vala|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9053" PostTypeId="1" AcceptedAnswerId="10774" CreationDate="2016-11-04T09:44:45.867" Score="5" ViewCount="344" Body="&lt;p&gt;I'm sorry if this is a stupid question, but I don't really get the logic of Noise player (or these music-library based players in general, I use Audacious on my other systems). However I want to give it a chance before I switch so please don't recommend other players (unless they follow elementary design guidelines but work like Audacious).&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;Update:&lt;/strong&gt; After switching to elementary OS Juno on my primary laptop (a Dell ultrabook), I've found that Music/Noise actually cannot even load my library (~30 GB of mp3s) - it crashed every time I tried to import it. Then I tried &lt;a href=&quot;https://appcenter.elementary.io/com.github.artemanufrij.playmymusic/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Melody&lt;/strong&gt;&lt;/a&gt; - a great player by Artem Anufrij, which loaded the library in two minutes. This player works exactly how I expect it, I highly recommend it and if I knew about it before, I wouldn't even bother to aks this question here.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;When I double-click on an album (for example) I expect it to play just that album but it won't - it plays from the whole collection of my music, which is incredibly annoying. Shuffle in particular is very problematic in this regard, with shuffle off it plays the album before it switches to some other music.&lt;/p&gt;&#xA;&lt;p&gt;Also the queue feature works rather unpredictable - I managed to put some songs there once but when I tried to add more songs it didn't update and showed no other songs than the first batch. Also most of the time the queue shows up as empty even though there is music playing, which is superpuzzling to me.&lt;/p&gt;&#xA;&lt;p&gt;So to narrow it down:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;How do I make Noise to play only subset of my library, e.g. few albums or just hand-picked songs?&lt;/li&gt;&#xA;&lt;li&gt;How do I use queue properly?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2020-08-19T14:44:28.480" LastActivityDate="2020-08-19T14:44:28.480" Title="How to make Noise play what I want?" Tags="|music|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9054" PostTypeId="1" CreationDate="2016-11-04T11:05:32.590" Score="0" ViewCount="349" Body="&lt;p&gt;I'm trying to take a screenshot with my keyboard, I'm clicking Alt+PrtScr like normal, I hear a bleeping sound but no screenshot is saved in the Pictures folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked with dconf Editor as suggested in this stackoverflow question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5384/change-the-folder-where-screenshots-are-saved&quot;&gt;Change the folder where screenshots are saved&lt;/a&gt; but I can't find the gnome-screenshot option for some reason?&lt;/p&gt;&#xA;" OwnerUserId="7234" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-04T14:05:42.760" Title="Where are the screenshots saved to in 0.4?" Tags="|system|" AnswerCount="1" CommentCount="0" ClosedDate="2016-11-04T17:43:59.337" ContentLicense="CC BY-SA 3.0" />
  <row Id="9056" PostTypeId="1" CreationDate="2016-11-04T12:46:09.067" Score="0" ViewCount="489" Body="&lt;p&gt;I've installed 'software-properties-common', 'python-software-properties', but still I couldn't install the 'elementary-tweaks' in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now remember what I've installed and then when I run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 98, in &amp;lt;module&amp;gt;&#xA;    main()&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 62, in main&#xA;    distinfo = lsb_release.get_distro_information(options.upstream)&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 344, in get_distro_information&#xA;    distinfo = guess_debian_release()&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 239, in guess_debian_release&#xA;    get_distro_info(distinfo['ID'])&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in get_distro_info&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in &amp;lt;lambda&amp;gt;&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;ValueError: could not convert string to float: '12.04 LTS'&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 98, in &amp;lt;module&amp;gt;&#xA;    main()&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 62, in main&#xA;    distinfo = lsb_release.get_distro_information(options.upstream)&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 344, in get_distro_information&#xA;    distinfo = guess_debian_release()&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 239, in guess_debian_release&#xA;    get_distro_info(distinfo['ID'])&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in get_distro_info&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in &amp;lt;lambda&amp;gt;&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;ValueError: could not convert string to float: '8.04 LTS'&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 98, in &amp;lt;module&amp;gt;&#xA;    main()&#xA;  File &quot;/usr/bin/lsb_release&quot;, line 62, in main&#xA;    distinfo = lsb_release.get_distro_information(options.upstream)&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 344, in get_distro_information&#xA;    distinfo = guess_debian_release()&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 239, in guess_debian_release&#xA;    get_distro_info(distinfo['ID'])&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in get_distro_info&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;  File &quot;/usr/lib/python3/dist-packages/lsb_release.py&quot;, line 41, in &amp;lt;lambda&amp;gt;&#xA;    RELEASES_ORDER.sort(key=lambda n: float(n[0]))&#xA;ValueError: could not convert string to float: '8.04 LTS'&#xA; system settings panel for elementary OS Loki that lets you easily and safely customise your desktop's appearance  https://github.com/elementary-tweaks/elementary-tweaks&#xA; More info: https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&#xA;Press [ENTER] to continue or ctrl-c to cancel adding it&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I guess, that's not what is expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please Help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="7236" LastActivityDate="2016-11-04T14:29:17.053" Title="I tried everything, but still I couldn't install elementary-tweaks on Loki" Tags="|release-loki|applications|ppa|" AnswerCount="2" CommentCount="1" ClosedDate="2016-11-04T17:42:56.560" ContentLicense="CC BY-SA 3.0" />
  <row Id="9057" PostTypeId="2" ParentId="9054" CreationDate="2016-11-04T14:05:42.760" Score="0" Body="&lt;p&gt;There is a bug in Loki, which is not allowing to take the screenshot. The Question has been asked &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7703/unable-to-screenshot-using-keyboard-shortcut-on-elementary-os-0-4-loki&quot;&gt;here&lt;/a&gt; earlier. And the Bug too has been &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-keyboard/+bug/1622298&quot; rel=&quot;nofollow noreferrer&quot;&gt;confirmed&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7220" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-04T14:05:42.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9058" PostTypeId="2" ParentId="9056" CreationDate="2016-11-04T14:14:42.223" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/elementary%20Tweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://quassy.github.io/elementary-apps/elementary%20Tweaks/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this website you can find the link to Launchpad, GitHub.&#xA;You can download the code and install it.&#xA;or straight run this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -sL  http://i-hate-farms.github.io/spores/install | sudo bash - &#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope it can help you.&lt;/p&gt;&#xA;" OwnerUserId="4817" LastActivityDate="2016-11-04T14:14:42.223" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9059" PostTypeId="1" AcceptedAnswerId="9087" CreationDate="2016-11-04T14:25:06.953" Score="4" ViewCount="3427" Body="&lt;p&gt;So i had to reinstall loki because my harddrive dies, but i forgot to check the 3d-party apps box but i really want the 3d-party apps. Is there any way for me to enable 3d-party apps after the installation? Also, i don't want to reinstall elementary because i have a lot of data on it and don't want to wait 3 hours for the backup to be made, then reinstall and then reinstall my backup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in regards, Davin&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastEditorUserId="6398" LastEditDate="2016-11-05T14:03:48.650" LastActivityDate="2016-11-05T14:03:48.650" Title="Forgot to check &quot;install third party software&quot; when installing Loki" Tags="|release-loki|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9060" PostTypeId="2" ParentId="9056" CreationDate="2016-11-04T14:29:17.053" Score="0" Body="&lt;p&gt;You shouldn't need 'python-software-properties' to install 'elementary-tweaks'. I guess, the Python version is breaking up something. Try removing 'python-software-properties' with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove 'python-software-properties'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then add the PPA, if it's not been already added:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7220" LastActivityDate="2016-11-04T14:29:17.053" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9061" PostTypeId="1" AcceptedAnswerId="9070" CreationDate="2016-11-04T14:46:50.133" Score="1" ViewCount="116" Body="&lt;p&gt;I have installed matlab on my system. When I try to run Matlab I get this error - &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/local/bin/matlab: 1: /usr/local/MATLAB/R2010b/bin/util/oscheck.sh:/lib64/libc.so.6: not found&#xA;/usr/local/MATLAB/R2010b/bin/glnxa64/MATLAB: error while loading shared libraries: libXp.so.6: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried installing libXp using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libXp.so.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which gave me these errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package libXp.so.6&#xA;E: Couldn't find any package by glob 'libXp.so.6'&#xA;E: Couldn't find any package by regex 'libXp.so.6'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install libXp6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With this error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package libXp6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How do I solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My architecture is x86_64&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="7237" LastActivityDate="2016-11-04T20:12:01.153" Title="Installing libXp on Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9062" PostTypeId="1" AcceptedAnswerId="9071" CreationDate="2016-11-04T15:43:54.953" Score="4" ViewCount="4294" Body="&lt;p&gt;I've a strange issue. After restarting my laptop, top menu bar is blinking and disappearing. I'm getting the below error If I run the command &lt;code&gt;wingpanel --toggle-indicator app-launcher&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[15:24:33.917940 GLib-GObject-Critical] g_object_new_valist: object class 'SecurityPrivacyPlug' has no property named 'supported-settings'&#xA;wingpanel: symbol lookup error: /usr/lib/x86_64-linux-gnu/switchboard/personal/pantheon-security-privacy/libpantheon-security-privacy.so: undefined symbol: switchboard_plug_get_supported_settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, here is a screenshot:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/g5UcC.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g5UcC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS:// Restarting my laptop, &lt;code&gt;apt-get upgrade&lt;/code&gt; didn't help&lt;/p&gt;&#xA;" OwnerUserId="7238" LastActivityDate="2016-11-05T06:26:37.993" Title="Top menu bar is disapearing" Tags="|wingpanel|pantheon|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9063" PostTypeId="2" ParentId="9052" CreationDate="2016-11-04T16:01:03.687" Score="3" Body="&lt;p&gt;Granite is written in Vala, so it provides a C API which you can use from C++.  Using it should be fairly straightforward; just &lt;code&gt;#include &amp;lt;granite.h&amp;gt;&lt;/code&gt; in your code, and build with something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;g++ -o test test.cpp `pkg-config --libs --cflags granite`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, you should be able to use Granite:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#include &amp;lt;granite.h&amp;gt;&#xA;&#xA;void do_stuff (int w, int h) {&#xA;  GraniteDrawingBufferSurface* bs = granite_drawing_buffer_surface_new(w, h);&#xA;  granite_drawing_buffer_surface_clear(bs);&#xA;  g_object_unref(bs);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I chose &lt;code&gt;Granite.Drawing.BufferSurface&lt;/code&gt; because it's the first class in the VAPI, but you can use any public API this way.&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2016-11-04T16:01:03.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9064" PostTypeId="1" CreationDate="2016-11-04T16:26:20.977" Score="1" ViewCount="92" Body="&lt;p&gt;I cannot figure out what is happening in pantheon mail. On first time opening, I try to enter my email but it says &quot;incorrect username or password&quot; everytime. But if I go to Gmail online it works perfectly fine. What do I do?&lt;/p&gt;&#xA;" OwnerUserId="7239" LastActivityDate="2016-11-04T16:26:20.977" Title="Email account won't sign in" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="7" ClosedDate="2016-11-23T11:27:49.247" ContentLicense="CC BY-SA 3.0" />
  <row Id="9066" PostTypeId="2" ParentId="8910" CreationDate="2016-11-04T17:23:52.207" Score="4" Body="&lt;p&gt;This came up on ask Ubuntu and I see one of the comments says the answer worked on Loki. &lt;a href=&quot;https://askubuntu.com/questions/622988/wifi-issues-with-macbook-pro-retina-early-2015-12-2-on-ubuntu-15-04/624746#624746&quot;&gt;Check Here for full details&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what it says to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download this &lt;a href=&quot;https://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/plain/brcm/brcmfmac43602-pcie.bin&quot; rel=&quot;nofollow noreferrer&quot;&gt;firmware&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /lib/firmware/brcm&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(If folder doesn't exist then...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo mkdir /lib/firmware/brcm&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd ~/Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo mv brcmfmac43602-pcie.bin /lib/firmware/brcm/brcmfmac43602-pcie.bin&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or reboot however you normally do it. I do see a note on ask ubuntu saying &quot;You might have to run apt-get update and apt-get upgrade.&quot; I'd reboot and see if it works without doing that first. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-11-04T17:23:52.207" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9067" PostTypeId="2" ParentId="8163" CreationDate="2016-11-04T19:15:59.240" Score="2" Body="&lt;p&gt;I can confirm this bug (it bogs me too). &#xA;loki 0.4 is running on an Intel-based  PC using Kernel 4.4.0-36-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I investigated into it I found that different users have different behaviour (typing is possible for another user). &#xA;I created a new user by &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo useradd -c 'elementary test user 0' -d /home/elementary0 -m -s /bin/bash  elementary0  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;added a password. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When switching to that user the input/search works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it might be that some &quot;old user settings&quot; causing this behaviour. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could someone help, which settings causing this behaviour?&lt;/p&gt;&#xA;" OwnerUserId="7241" LastEditorUserId="7241" LastEditDate="2016-11-05T06:11:24.837" LastActivityDate="2016-11-05T06:11:24.837" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9068" PostTypeId="2" ParentId="2566" CreationDate="2016-11-04T19:28:50.110" Score="2" Body="&lt;p&gt;I had this issue on Loki as well. It is fixable by installing the newest version from &lt;a href=&quot;https://github.com/jonls/redshift&quot; rel=&quot;nofollow noreferrer&quot;&gt;github&lt;/a&gt;. Click clone or download and download as a zip file. I built it using the instructions in HACKING.md. You'll have to install the prerequisites. Once it was installed I copied the sample ~/.config/redshift.conf from &lt;a href=&quot;https://wiki.archlinux.org/index.php/Redshift#Manual_setup&quot; rel=&quot;nofollow noreferrer&quot;&gt;AUR&lt;/a&gt;. Google the latitude and longitude in your location and change that in the conf file. I also put a ; in front of:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;adjustment-method=randr&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was getting an error about randr, and with the manual longitude/latitude setup randr isn't needed. It's a bit of work, and requires making a new .desktop file, easy with an app like alacarte, but redshift doesn't glitch on me now. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T19:28:50.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9069" PostTypeId="1" AcceptedAnswerId="9120" CreationDate="2016-11-04T19:59:21.787" Score="4" ViewCount="508" Body="&lt;p&gt;I'm trying to set up elementaryOS on a computer for use in a classroom.  I want to have a specific set of applications appear in the Dock for the Guest session by default.  Ideally these would be the same as the ones I have set up in the main (Administrator) account.&#xA;How can I set this up?&lt;br&gt;&#xA;Would I be better off creating another user account?  Can I make it reset all changes when it logs off like the guest session?&lt;/p&gt;&#xA;" OwnerUserId="7242" LastActivityDate="2016-11-06T18:41:36.497" Title="How can I have the same applications in the Dock for the Guest session as I have in the Administrator account?" Tags="|release-loki|plank|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9070" PostTypeId="2" ParentId="9061" CreationDate="2016-11-04T20:12:01.153" Score="1" Body="&lt;p&gt;It's not in the repo anymore. you can &lt;a href=&quot;http://www.ubuntuupdates.org/package/core/vivid/main/base/libxp6&quot; rel=&quot;nofollow noreferrer&quot;&gt;download&lt;/a&gt; the old .deb and install that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;sudo dpkg -i name_of_deb.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T20:12:01.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9071" PostTypeId="2" ParentId="9062" CreationDate="2016-11-04T20:41:20.360" Score="3" Body="&lt;p&gt;I just applied updates via appcenter and had the same issue. Switchboad won't open either. I'm not sure if it's a new bug in switchboard-plug-security-privacy or what, but I was able to remove that switchboard plug to get everything working, well everything minus that plug.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt remove switchboard-plug-security-privacy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T20:41:20.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9072" PostTypeId="1" AcceptedAnswerId="9074" CreationDate="2016-11-04T20:42:05.290" Score="2" ViewCount="981" Body="&lt;p&gt;I'm new to Elementary. I'm also not used to non-debian Linuxes. How do I go about safely unmounting the USB which I used to install Elementary?!&lt;/p&gt;&#xA;" OwnerUserId="7244" LastActivityDate="2016-11-04T20:47:58.513" Title="Safely Unmounting a USB" Tags="|system-installation|usb-drive|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9073" PostTypeId="1" CreationDate="2016-11-04T20:47:46.437" Score="2" ViewCount="465" Body="&lt;p&gt;I just recently wanted to install the elementary sdk with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to locate package elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can't find another command to get the sdk because the developer page only states this package.&#xA;Has anyone got an idea to where I can find this package?&lt;/p&gt;&#xA;" OwnerUserId="7245" LastActivityDate="2016-11-04T20:47:46.437" Title="Installing Elementary Sdk unable to locate package" Tags="|software-installation|" AnswerCount="0" CommentCount="1" ClosedDate="2016-11-23T11:30:06.767" ContentLicense="CC BY-SA 3.0" />
  <row Id="9074" PostTypeId="2" ParentId="9072" CreationDate="2016-11-04T20:47:58.513" Score="2" Body="&lt;p&gt;Right after install, just remove it when the pc goes off during reboot. In general you hit the eject button next to the usb sticks name in files. See screenshot&#xA;&lt;a href=&quot;https://i.stack.imgur.com/pYN0e.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pYN0e.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-04T20:47:58.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9075" PostTypeId="1" AcceptedAnswerId="10551" CreationDate="2016-11-04T23:21:23.020" Score="3" ViewCount="638" Body="&lt;p&gt;This is a development related question and cross posted (&lt;a href=&quot;https://askubuntu.com/questions/845662/showing-notification-in-ubuntu-based-installs&quot;&gt;for reference&lt;/a&gt;). I am using following code for showing notification,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;import subprocess as s&#xA;import os&#xA;&#xA;img =  os.path.abspath('icon.svg')&#xA;s.Popen([&quot;notify-send&quot;, &quot;-i&quot;, img, &quot;Title&quot;, &quot;some text&quot;])&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In elementary os, this is working with the exception of icon. No icon is being shown. In Ubuntu 16.04, however, everything is working as expected (including icon).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since no warning/error is shown, I am not sure what needs to be done. The &lt;a href=&quot;https://elementary.io/docs/code/getting-started#Additional-features&quot; rel=&quot;nofollow noreferrer&quot;&gt;developer page&lt;/a&gt; for showing notification in Elementary shows usage with vala (especially this line of code &lt;code&gt;var image = new Gtk.Image.from_icon_name (&quot;dialog-warning&quot;, Gtk.IconSize.DIALOG)&lt;/code&gt;) but I intend to stick with python (additionally, I don't understand vala as of now).&lt;/p&gt;&#xA;" OwnerUserId="6208" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-05T09:18:02.140" Title="Notification appearing without icon for python script" Tags="|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9077" PostTypeId="1" CreationDate="2016-11-05T01:26:57.870" Score="1" ViewCount="37" Body="&lt;p&gt;Is there a reason why only one of my 4 cores is running around 14-17% while idling? ...and why something on my network is active while idling, even with the browser closed?&lt;/p&gt;&#xA;&lt;p&gt;Notably, I've also apparently uploaded 1.5mbs?!&lt;/p&gt;&#xA;&lt;p&gt;I'm using gnome-system-monitor. I'm going to shut down my browser, let the PC idle for 10 minutes, then take a screen shot and share it. Unfortunately I can only post 2 images.&lt;/p&gt;&#xA;&lt;h1&gt;Screenshots of the PC's Processes&lt;/h1&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0bXBf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0bXBf.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/VRgZ1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VRgZ1.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any help would be greatly appreciated.&lt;/p&gt;&#xA;&lt;p&gt;P.S. Is 0.4 Loki the latest version?!&lt;/p&gt;&#xA;" OwnerUserId="7244" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-11-05T14:16:24.910" Title="Why is one of my 4 cores running around 14-17% and something on my network active while idling?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9078" PostTypeId="1" CreationDate="2016-11-05T01:32:01.403" Score="3" ViewCount="480" Body="&lt;p&gt;Ran: &lt;code&gt;lspci -vvnn | grep Network&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;03:00.0 Network controller [0280]: Intel Corporation Wireless 7265 [8086:095a] (rev 59)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure how to check to make sure my driver is up-to-date or if the firmware is correct. Can someone help point me in the right direction so I can connect to the wifi on Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="7247" LastEditorUserId="25612" LastEditDate="2023-04-06T08:00:49.440" LastActivityDate="2024-01-01T11:03:00.340" Title="Intel 7265 Chipset, Elementary can't connect to wifi" Tags="|wifi|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9079" PostTypeId="1" CreationDate="2016-11-05T05:22:11.703" Score="0" ViewCount="145" Body="&lt;p&gt;Hard to know which category to post this in..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loving Elementary but want to tweak it further.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to have Plex built in and I want to remove it but plex doesn't show in the repo's at all. I installed Synaptic to see if it would appear there - no joy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the short question is how do I remove it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anthony&lt;/p&gt;&#xA;" OwnerUserId="7248" LastActivityDate="2016-12-05T06:51:54.720" Title="How do I remove Plex?" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9081" PostTypeId="2" ParentId="9079" CreationDate="2016-11-05T06:03:08.900" Score="1" Body="&lt;p&gt;I've installed elementary many times and always had to install plex manually, but there is an easy way to remove it. First identify a file from plex, any file that is installed with plex would work. If you know where plex is installed his is easy, otherwise you may need to use find. &lt;a href=&quot;http://www.binarytides.com/linux-find-command-examples/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here is a good tutorial on find&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have the name run dpkg -S file to determin the name of the package that installed plex. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -S /bin/cp&#xA;coreutils: /bin/cp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;coreutils is the package that installed cp. So to remove it I'd run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -r coreutils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Obviously, you don't want to remove coreutils, just whatever package installed plex.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This method will only work if plex was installed from a package. It won't work if plex was built from source.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-05T06:03:08.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9082" PostTypeId="2" ParentId="9062" CreationDate="2016-11-05T06:26:37.993" Score="2" Body="&lt;p&gt;This seems to be an issue only with the Daily PPA enabled where some related packages are not yet updated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is Danel's answer on Launchpad &lt;a href=&quot;https://bugs.launchpad.net/switchboard-plug-security-privacy/+bug/1639357/comments/1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/switchboard-plug-security-privacy/+bug/1639357/comments/1&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2016-11-05T06:26:37.993" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9083" PostTypeId="1" AcceptedAnswerId="9085" CreationDate="2016-11-05T06:36:24.537" Score="1" ViewCount="303" Body="&lt;p&gt;Whenever I attempt to activate my wireless setting, it immediately turns off. I have no problem using wired. I am using an Intel 7260 dual-band, and the Bluetooth works just fine. &lt;/p&gt;&#xA;" OwnerUserId="7249" LastActivityDate="2016-11-05T10:39:11.677" Title="Wireless Using Intel Wireless 7260 Won't Activate (eOS Loki)" Tags="|release-loki|wifi|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9084" PostTypeId="1" CreationDate="2016-11-05T09:45:24.483" Score="2" ViewCount="1519" Body="&lt;p&gt;There are instructions how to do it previous versions of elementary OS but not for Loki. There is no setting file in the /home/.config/dock1 folder to edit. My monitors are not mirrored, they are extended. I want taskbar on both monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help :)&lt;/p&gt;&#xA;" OwnerUserId="7251" LastEditorUserId="37" LastEditDate="2016-11-15T14:33:17.170" LastActivityDate="2017-08-11T06:53:48.793" Title="How to duplicate the taskbar on the second monitor on Loki?" Tags="|release-loki|settings|display|plank|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-04T23:31:36.227" ContentLicense="CC BY-SA 3.0" />
  <row Id="9085" PostTypeId="2" ParentId="9083" CreationDate="2016-11-05T10:39:11.677" Score="2" Body="&lt;p&gt;Are you using a laptop? Brand?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With my HP Omen and Intel 7260 (no dual-band) I had to blacklist acer_wmi to connect with Wifi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a .conf file in /etc/modprobe.d/ with&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;blacklist acer_wmi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Save and Reboot.&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2016-11-05T10:39:11.677" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9086" PostTypeId="2" ParentId="9078" CreationDate="2016-11-05T10:42:14.047" Score="0" Body="&lt;p&gt;Are you using a laptop? Brand?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With my HP Omen and Intel 7260 (no dual-band) I had to blacklist acer_wmi to connect with Wifi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a .conf file in /etc/modprobe.d/ with&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;blacklist acer_wmi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Save and Reboot.&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2016-11-05T10:42:14.047" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="9087" PostTypeId="2" ParentId="9059" CreationDate="2016-11-05T10:47:32.273" Score="4" Body="&lt;p&gt;Open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The next time I suggest you use a meaningful title for the problem :)&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2016-11-05T10:47:32.273" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9088" PostTypeId="2" ParentId="9077" CreationDate="2016-11-05T14:16:24.910" Score="1" Body="&lt;p&gt;Your network is probably still active because you are still maintaining a connection with the Internet and therefor still sending and receiving packets&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-05T14:16:24.910" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9090" PostTypeId="2" ParentId="9084" CreationDate="2016-11-05T15:52:59.077" Score="2" Body="&lt;p&gt;Setting is now done via gsettings. Install dconf-editor an go to net &gt; launchpad &gt; plank and change enabled-docks from ['dock1'] to ['dock1', 'dock2'] and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; cp ~/.config/plank/dock1 ~/.config/plank/dock2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now restart plank. If you change your docked apps often you might want to look into &lt;a href=&quot;https://unix.stackexchange.com/questions/203846/how-to-sync-two-folders-with-command-line-tools&quot;&gt;syncing two folders&lt;/a&gt; You could come up with a command that syncs the folders and have it run on every reboot. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="578" LastEditDate="2017-08-11T06:53:48.793" LastActivityDate="2017-08-11T06:53:48.793" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9091" PostTypeId="1" AcceptedAnswerId="9096" CreationDate="2016-11-05T16:01:59.553" Score="0" ViewCount="115" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EYKO2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EYKO2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click it nothing happens.&lt;/p&gt;&#xA;" OwnerUserId="7257" LastActivityDate="2016-11-05T17:42:02.950" Title="What is this red circle icon upper right corner next to keyboard settings?" Tags="|icons|" AnswerCount="2" CommentCount="0" ClosedDate="2018-02-21T10:32:40.807" ContentLicense="CC BY-SA 3.0" />
  <row Id="9092" PostTypeId="2" ParentId="9078" CreationDate="2016-11-05T16:28:51.910" Score="-2" Body="&lt;p&gt;The answer I found to this problem specific to my ASUS laptop can be seen here: &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2181558&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2181558&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help @Davide&lt;/p&gt;&#xA;" OwnerUserId="7247" LastActivityDate="2016-11-05T16:28:51.910" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9093" PostTypeId="1" CreationDate="2016-11-05T16:31:45.950" Score="1" ViewCount="252" Body="&lt;p&gt;I'm feeling pretty moronic, I have to be missing something here.  I downloaded elementary and built a bootable USB stick using Rufus.  I want to have a standalone, separate from the HDD, copy of elementary that is optimized, updated and with apps.  I have a second USB stick that I wish to use for this purpose.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So.  Elemental starts and runs on the first stick.  It asks if I want to install it.  I say yes.  I then pick &quot;something else&quot; and point it to the second stick.  It goes out and returns an error dialog that says, &quot;No root system is defined, please correct this with the partitioning menu.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Huh.  At this point, it would be dang nice if it said, &quot;Would you like me to fix this for you?&quot;  But all right.  I close that out and first try the &quot;new partition table&quot; option.  It blows the partition on the stick, and then nothing else happens, other than I now have an empty stick.  I revert.  So I look for the &quot;partitioning menu.&quot;  And of course, there isn't one that I can find.  Error messages should match the environment.  But I do find GParted, and ah-hah, the stick is formatted as fat32.  So, I tell GParted to blow the partition and make the drive EXT2.  It does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I start the install dialog, elementary sees the stick as EXT2, I tell it to put the OS there and to put the bootloader there, and it comes back with the same problem.  No root filesystem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then change the stick to EXT4 just to see, and that fails too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I simply don't know what to do next.  Help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Joe&lt;/p&gt;&#xA;" OwnerUserId="7258" LastActivityDate="2016-11-05T17:10:22.080" Title="Can't get elementary to install on a USB stick" Tags="|usb|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9094" PostTypeId="2" ParentId="9093" CreationDate="2016-11-05T17:10:22.080" Score="1" Body="&lt;p&gt;When you click to format it to ext2 also check the box: &quot;format this partition&quot; if not already and in the drop-down box below select the option which just says / (you should see something like /,/home,/root,/boot etc)&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-05T17:10:22.080" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9095" PostTypeId="2" ParentId="9091" CreationDate="2016-11-05T17:13:01.330" Score="0" Body="&lt;p&gt;I think it means something has downloaded, not sure though. I don't have it, maybe try a reverse image search on google&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-05T17:13:01.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9096" PostTypeId="2" ParentId="9091" CreationDate="2016-11-05T17:42:02.950" Score="0" Body="&lt;p&gt;It is an indicator without a proper icon.  Dropbox is probably the most common app that does this, but there are others. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-05T17:42:02.950" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9097" PostTypeId="1" CreationDate="2016-11-05T19:15:13.010" Score="2" ViewCount="2056" Body="&lt;p&gt;Does anyone know how to sync Iphone 5s IOS 10.1 with elementary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can mount the iphone and see my pictures/videos but I would like to be able to sync my music. I tried with Noise and Rhythmbox and had no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible?&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2018-11-24T01:58:44.357" Title="Sync Iphone IOS 10.1" Tags="|music|iphone|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9098" PostTypeId="2" ParentId="9097" CreationDate="2016-11-05T19:31:46.170" Score="1" Body="&lt;p&gt;Its not supported. With a jailbroken iPhone and a 20 dollar tweak it can be done with Rhythmbox. I doubt the tweak works out. 10.1 yet, and I haven't kept up with the current state of jailbreak. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd suggest using a different method.  I have a plex account so I use it to sync/stream videos and music. On iOS I really. Luke's cloudbeats for music and audio books.&#xA;&lt;a href=&quot;http://www.cloudbeatsapp.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.cloudbeatsapp.com&lt;/a&gt;&#xA;&lt;a href=&quot;https://www.plex.tv/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.plex.tv/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Plenty of other apps out there. These are just my favorites.  &lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="7132" LastEditDate="2016-11-05T21:12:58.070" LastActivityDate="2016-11-05T21:12:58.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9099" PostTypeId="1" CreationDate="2016-11-05T20:00:45.963" Score="0" ViewCount="2685" Body="&lt;p&gt;i have just installed elementary OS Loki 0.4, and at first everything was working well, but now I cant install anything from the AppCenter. Im only able to  install things if I use Synaptic or the Terminal, but the AppCenter seems to be bugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope anyone could help me.&lt;/p&gt;&#xA;" OwnerUserId="7261" LastActivityDate="2016-11-13T01:00:07.977" Title="Can´t install ANYTHING from AppCenter" Tags="|release-loki|appcenter|" AnswerCount="2" CommentCount="0" ClosedDate="2016-11-13T01:00:29.097" ContentLicense="CC BY-SA 3.0" />
  <row Id="9100" PostTypeId="2" ParentId="9097" CreationDate="2016-11-05T20:33:58.720" Score="1" Body="&lt;p&gt;To sync music between a computer and an iPhone, iTunes is required. Unfortunately, Apple has not made iTunes for linux. However, maybe you can try something like this: &lt;a href=&quot;https://appdb.winehq.org/objectManager.php?sClass=version&amp;amp;iId=31322&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appdb.winehq.org/objectManager.php?sClass=version&amp;amp;iId=31322&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="7263" LastActivityDate="2016-11-05T20:33:58.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9101" PostTypeId="1" CreationDate="2016-11-05T20:42:12.783" Score="1" ViewCount="2069" Body="&lt;p&gt;&quot;Failed to request VPN secrets #3: No agents were available for this request&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried reinstalling openvpn and network manager, and tried different ovpn profiles and made sure I entered the correct login information... &lt;/p&gt;&#xA;" OwnerUserId="7263" LastActivityDate="2017-08-09T09:07:34.970" Title="Cannot connect to my VPN service" Tags="|networking|vpn|openvpn|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9104" PostTypeId="2" ParentId="8880" CreationDate="2016-11-05T21:42:56.887" Score="1" Body="&lt;p&gt;Short answer, no.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not an option in gala, elementary OS' default window manager. You can install other window mangers and replace gala with something like compiz by editing&#xA;&lt;code&gt;/usr/share/gnome-session/sessions/pantheon.session&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gala is pretty central to elementary OS. If you try using another window manager you are likely to experience issues. I installed compiz on my laptop just to see what would happen. It sort of works. There is no desktop background and wingpanel segfaults. Plank loads but doesn't hide properly. Perhaps with enough tweaking it could be made usable. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-05T21:42:56.887" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9105" PostTypeId="1" CreationDate="2016-11-05T22:22:03.943" Score="1" ViewCount="4383" Body="&lt;p&gt;Followed this step by step: &lt;a href=&quot;https://www.privateinternetaccess.com/installer/download_installer_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.privateinternetaccess.com/installer/download_installer_linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pia doesn't run after this command: &#xA;./pia-v65-installer.sh&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run it manually (with the mouse, click on run), Pia appears in Applications, but doesn't run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I uninstalled it with rm -rf ~/.pia_manager/ and tried again. Both methods don't work yet again, and pia icon doesn't even appear in applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what's going on here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what shows in Terminal when I try to install pia:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;johan@johan-N76VB:~$ cd Downloads/&#xA;johan@johan-N76VB:~/Downloads$ tar -xzf pia-v65-linux.tar.gz&#xA;johan@johan-N76VB:~/Downloads$ ./pia-v65-installer.sh&#xA;Extracting files...&#xA;[sudo] password for johan: &#xA;Installing dependencies...&#xA;Running: sudo apt-get install -y libxss1 libappindicator1&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;libappindicator1 is already the newest version (12.10.1+15.04.20141110-0ubuntu1).&#xA;libxss1 is already the newest version (1:1.2.2-1).&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;Installation complete!&#xA;johan@johan-N76VB:~/Downloads$ &lt;/p&gt;&#xA;" OwnerUserId="7257" LastEditorUserId="7257" LastEditDate="2016-11-06T08:38:27.770" LastActivityDate="2017-03-24T20:50:30.330" Title="Can't install private internet access" Tags="|vpn|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9106" PostTypeId="1" CreationDate="2016-11-06T02:16:54.570" Score="1" ViewCount="646" Body="&lt;p&gt;I know you could save files to the Desktop in Kali Linux. But it has been a while, so I have no idea where the &quot;Desktop&quot; is located in the elementary OS filesystem. Can anybody help me out?&lt;/p&gt;&#xA;" OwnerUserId="7244" LastEditorUserId="308" LastEditDate="2019-12-06T07:19:54.193" LastActivityDate="2019-12-06T07:19:54.193" Title="How do I save files to the desktop?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9107" PostTypeId="2" ParentId="9106" CreationDate="2016-11-06T03:00:04.603" Score="2" Body="&lt;p&gt;There is a Desktop folder in your home folder, but nothing in there will show up on the desktop. elementary OS doesn't show icons on a desktop.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="308" LastEditDate="2019-12-06T07:19:05.257" LastActivityDate="2019-12-06T07:19:05.257" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="9108" PostTypeId="1" CreationDate="2016-11-06T03:48:20.450" Score="0" ViewCount="108" Body="&lt;p&gt;I'm trying to view the info of my crypto-currency wallet, but when I tried to open up the &lt;code&gt;.bat&lt;/code&gt; file with the default text editor the OS stopped responding. Is there a text editor or program to open, view, and edit &lt;code&gt;.bat&lt;/code&gt; files?&lt;/p&gt;&#xA;" OwnerUserId="7244" LastActivityDate="2016-11-07T18:04:47.577" Title="Opening .BAT files" Tags="|release-loki|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9110" PostTypeId="1" CreationDate="2016-11-06T08:06:37.940" Score="2" ViewCount="408" Body="&lt;p&gt;Is there any way I can change the Skype for Linux Alpha wingpanel indicator to match the default theme? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently it's green:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/j5k1U.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j5k1U.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GTK: Arc&lt;br&gt;&#xA;Icon theme: ElementaryPlus&lt;br&gt;&#xA;elementary OS Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="6184" LastActivityDate="2016-11-07T05:09:11.243" Title="Skype for Linux Alpha Wingpanel Indicator" Tags="|wingpanel|skype|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9113" PostTypeId="2" ParentId="5232" CreationDate="2016-11-06T09:22:03.510" Score="0" Body="&lt;p&gt;Snaps means, that you can install Software, without installing dependencies, because all needed dependent software is already part of the snap-package.&#xA;All installed software coming from a snap is located in the filesystem under /snap unlike .deb packages, where it will be install allover the system.&#xA;Means you can also install different versions of the same software. For example /snap/firefox-49.0.2 /snap/firefox-49.03 /snap/firefox-50.0.1&#xA;So the installed software is only in that one specific folder and no where else in the filesystem.&lt;/p&gt;&#xA;" OwnerUserId="7268" LastActivityDate="2016-11-06T09:22:03.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9116" PostTypeId="2" ParentId="9110" CreationDate="2016-11-06T12:15:02.890" Score="0" Body="&lt;p&gt;I don't think so, or you would have to completly disable the icon or edit the icon file itself because i don't think skype has support for that stuff.&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-06T12:15:02.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9118" PostTypeId="2" ParentId="9099" CreationDate="2016-11-06T12:20:36.523" Score="0" Body="&lt;p&gt;So, do you not see the other apps or do they not want to install. If the first i would like to redirect you here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9059/forgot-to-check-install-third-party-software-when-installing-loki&quot;&gt;Forgot to check &amp;quot;install third party software&amp;quot; when installing Loki&lt;/a&gt; . Otherwise, try rebooting and only try to install one app at a time.&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-06T12:20:36.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9119" PostTypeId="2" ParentId="8956" CreationDate="2016-11-06T14:25:29.763" Score="-2" Body="&lt;p&gt;@Ibraheem Moosa The solution is quite simple.&#xA;The only thing you have to do is edit the file &lt;code&gt;/usr/share/applications/calibre-gui.desktop&lt;/code&gt; with root rights and change the line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;Exec=calibre --detach %F&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;Exec=calibre&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="7270" LastActivityDate="2016-11-06T14:25:29.763" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9120" PostTypeId="2" ParentId="9069" CreationDate="2016-11-06T18:41:36.497" Score="3" Body="&lt;p&gt;You can customize your guest session under elementary OS. In your case you might only want to copy some of the configuration files of your Administrator account (startup apps, dock apps, etc.) to &lt;code&gt;/etc/guest-session/skel&lt;/code&gt; that will be copied for each new guest login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The customization steps for elementary OS are pretty much the same as for Ubuntu: &lt;a href=&quot;https://help.ubuntu.com/community/CustomizeGuestSession&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/CustomizeGuestSession&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Part of the original tutorial:&lt;/strong&gt; Using a special user account for setting the guest preferences is the most convenient way to customize the guest session feature. Please follow these steps: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Add a new user account with the username &lt;code&gt;guest-prefs&lt;/code&gt;. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Log in to &lt;code&gt;guest-prefs&lt;/code&gt; and change things to what you want your guests encounter at startup. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a terminal window and create a symbolic link to the home directory of &lt;code&gt;guest-prefs&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo mkdir /etc/guest-session&#xA;sudo ln -s /home/guest-prefs /etc/guest-session/skel&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now, when you launch a guest session, it will have the same preferences as you set for &lt;code&gt;guest-prefs&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;In this tutorial we use the name &lt;code&gt;guest-prefs&lt;/code&gt;, but you can give the&#xA;special purpose user some other username. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You may prefer to hide &lt;code&gt;guest-prefs&lt;/code&gt; from the login screen and the&#xA;system menu. Hopefully that will be easy to accomplish when&#xA;&lt;a href=&quot;https://launchpad.net/bugs/857651&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/bugs/857651&lt;/a&gt; has been fixed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-06T18:41:36.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9123" PostTypeId="1" AcceptedAnswerId="9124" CreationDate="2016-11-07T01:42:02.100" Score="1" ViewCount="3987" Body="&lt;p&gt;I am trying to get Loki to dual boot on the same HD as my OSX 10.10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried starting the install as per the instructions by booting from the iso on a thumb drive. This loads the installer, but I'm only given the option to blow my OSX installation away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried installing refind 10.4 (I was following this guide &lt;a href=&quot;http://forlearning.com/dual-booting-elementary-os-and-osx/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forlearning.com/dual-booting-elementary-os-and-osx/&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 1: Without using refind, is there a method in the installation wizard to install elementary on the same boot HD as OSX? There appears to be nothing in the wizard to allow me to do so. I only get the ‘erase’ option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 2: If it is not possible to do this, if I use a boot manager such as refind is it possible to do so? I have tried following the instructions here (&lt;a href=&quot;http://forlearning.com/dual-booting-elementary-os-and-osx/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forlearning.com/dual-booting-elementary-os-and-osx/&lt;/a&gt; and I expect to see an option for ‘install alongside osx’) but when I &#xA;a) choose the ‘legacy’ option in refind (furthest right) it cannot find the bootable volume&#xA;b) choose the ‘linux’ option, the elementary install wizard loads but again it does not detect the presence of OSX on the drive and I still don’t get the  ‘install alongside OS X’ option and only see the erase option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few years back I installed Luna on a Macbook using refit and saw the ‘install alongside OSX’ option. I was able to successfully install.&lt;/p&gt;&#xA;" OwnerUserId="7281" LastEditorUserId="7281" LastEditDate="2016-11-07T11:39:15.030" LastActivityDate="2017-02-21T06:25:11.557" Title="Dual boot on OSX 10.10" Tags="|system-installation|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9124" PostTypeId="2" ParentId="9123" CreationDate="2016-11-07T04:56:10.183" Score="3" Body="&lt;p&gt;Refind is a boot manager. It is a handy way of choosing what OS to boot into, but won't help with your question. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resize your partition in OS X then boot from the thumb drive. &lt;a href=&quot;https://www.google.com/url?sa=t&amp;amp;rct=j&amp;amp;q=&amp;amp;esrc=s&amp;amp;source=web&amp;amp;cd=7&amp;amp;cad=rja&amp;amp;uact=8&amp;amp;ved=0ahUKEwi4rZak65XQAhXEhFQKHaksBhgQtwIIQDAG&amp;amp;url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DAAF3IajO13k&amp;amp;usg=AFQjCNHe95Zz66_mwoOvwzDRDCxXdgGi1A&amp;amp;sig2=mq12lxhRUIdJTbYPeXF-pQ&amp;amp;bvm=bv.137904068,d.cGw&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; is a video showing how to resize your partition on Yosemite. Be careful with this. Apple makes it pretty easy, but if things go wrong you can lose data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll have to decide how much space you want for OS X vs Loki. Think about how much you need for apps and media then add about 8gb. Linux uses a swap file and Loki's default size for that is 8gb. Set aside as much as you want for Loki and leave it as Free Space. The elementary installer can format it and partition it for Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="686" LastEditDate="2017-02-21T06:25:11.557" LastActivityDate="2017-02-21T06:25:11.557" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9125" PostTypeId="2" ParentId="9110" CreationDate="2016-11-07T05:09:11.243" Score="2" Body="&lt;p&gt;There is a mod for this on &lt;a href=&quot;https://askubuntu.com/questions/503267/change-skype-tray-icon&quot;&gt;Ask Ubuntu&lt;/a&gt;. It allows you to use any icons you want, but the package listed to download is a monochrome that goes well with elementary.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-11-07T05:09:11.243" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9126" PostTypeId="2" ParentId="9108" CreationDate="2016-11-07T07:25:18.870" Score="1" Body="&lt;p&gt;you might want to try looking at the file from a terminal ...&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;open a terminal window&lt;/li&gt;&#xA;&lt;li&gt;change directory to where the file is (not req'd but my way)&lt;/li&gt;&#xA;&lt;li&gt;if the file is small ... &lt;code&gt;cat {the file name}&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;if the file is large ... &lt;code&gt;more {the file name}&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-11-07T07:25:18.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9127" PostTypeId="2" ParentId="5595" CreationDate="2016-11-07T09:14:53.867" Score="14" Body="&lt;p&gt;You have Startup Disk Creator as in Ubuntu you can install it from the AppCenter or via the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install usb-creator-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-11-18T07:18:17.793" LastActivityDate="2016-11-18T07:18:17.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9128" PostTypeId="2" ParentId="6940" CreationDate="2016-11-07T09:21:31.490" Score="2" Body="&lt;p&gt;You cannot use compiz effects (not at all so this hack might not be useful) in Pantheon/Gala that is in the elementary OS desktop environement.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-07T09:21:31.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9129" PostTypeId="2" ParentId="8928" CreationDate="2016-11-07T09:29:23.950" Score="1" Body="&lt;p&gt;You cannot use this gnome extension because you are using elementary OS (&lt;code&gt;pantheon&lt;/code&gt;, &lt;code&gt;gala&lt;/code&gt;) and not &lt;code&gt;gnome-shell&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am pretty sure that you cannot do this under elementary OS, because this functionality is not implemented (and it uses only a single row of workspaces).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-07T09:29:23.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9130" PostTypeId="2" ParentId="7417" CreationDate="2016-11-07T09:30:26.043" Score="2" Body="&lt;p&gt;Sadly, this is not possible under elementary OS. You could file a feature request; however, keep in mind that developers might want to keep it clean.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="8741" LastEditDate="2018-08-04T21:57:21.043" LastActivityDate="2018-08-04T21:57:21.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9131" PostTypeId="2" ParentId="7264" CreationDate="2016-11-07T09:36:58.927" Score="0" Body="&lt;p&gt;You might want to use two ext4 partitions of your HDD, one for programs and mount it as&lt;code&gt;/usr&lt;/code&gt; and the second one for user documents and settings and mount it as &lt;code&gt;/home&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-07T09:36:58.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9132" PostTypeId="1" CreationDate="2016-11-07T12:58:20.237" Score="1" ViewCount="49" Body="&lt;p&gt;I have an issue with sharing option of bluetooth.&#xA;I can send files from my pc to my phone, but not form my phone to my pc.&#xA;My phone tell me that my pc don't accept any tranfered file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have configured this functionnality from System Panel &gt; share &gt; bluetooth but it doesn't work actually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my english !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance !&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-11-07T12:58:20.237" Title="Bluetooth issue" Tags="|bluetooth|sharing|" AnswerCount="0" CommentCount="4" ClosedDate="2016-11-08T18:07:27.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="9134" PostTypeId="2" ParentId="9108" CreationDate="2016-11-07T13:27:12.217" Score="-1" Body="&lt;p&gt;install Leafpad from the appcenter &lt;/p&gt;&#xA;" OwnerUserId="7286" LastActivityDate="2016-11-07T13:27:12.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9135" PostTypeId="2" ParentId="9099" CreationDate="2016-11-07T13:30:18.853" Score="2" Body="&lt;p&gt;&lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this should fix AppCenter issues&lt;/p&gt;&#xA;" OwnerUserId="7286" LastEditorUserId="26" LastEditDate="2016-11-13T01:00:07.977" LastActivityDate="2016-11-13T01:00:07.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9137" PostTypeId="1" CreationDate="2016-11-07T17:22:55.167" Score="1" ViewCount="48" Body="&lt;p&gt;I have a Xiaomi Notebook Air, and my PrtScn Key do not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xinput test dont catch any event when I press PrtScn.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i don't know if I can do something.&#xA;I'm asking for your help !&#xA;(sorry for my bad english)&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-11-07T17:22:55.167" Title="PrtScn not working natively" Tags="|release-loki|keyboard|keyboard-shortcuts|screenshot|" AnswerCount="0" CommentCount="6" ClosedDate="2016-11-21T21:35:16.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="9138" PostTypeId="1" CreationDate="2016-11-07T17:31:32.770" Score="0" ViewCount="516" Body="&lt;p&gt;&lt;strong&gt;My wifi keep turning off after 5 seconds&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First time first, i cant activate nor deactivate the wifi by Fn + F2 (Asus laptop problem, same old with Freya) usually i did connecting wifi by sleeping and unsleep the laptop, and voila the wifi connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the &lt;code&gt;sudo rfkill unblock all &amp;amp;&amp;amp; rfkill list all&lt;/code&gt; So here is my rfkill list all result&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: phy0: Wireless LAN&#xA;Soft blocked: no&#xA;Hard blocked: yes&#xA;1: asus-wlan: Wireless LAN&#xA;Soft blocked: no&#xA;Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this is my lshw -C network result&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network DISABLED      &#xA;   description: Wireless interface&#xA;   product: RT5390 Wireless 802.11n 1T/1R PCIe&#xA;   vendor: Ralink corp.&#xA;   physical id: 0&#xA;   bus info: pci@0000:01:00.0&#xA;   logical name: wlp1s0&#xA;   version: 00&#xA;   serial: 08:3e:8e:3f:5d:a2&#xA;   width: 32 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=rt2800pci driverversion=4.4.0-36-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;   resources: irq:16 memory:fea00000-fea0ffff&#xA;&#xA;&#xA; *-network&#xA;   description: Ethernet interface&#xA;   product: AR8161 Gigabit Ethernet&#xA;   vendor: Qualcomm Atheros&#xA;   physical id: 0&#xA;   bus info: pci@0000:02:00.0&#xA;   logical name: enp2s0&#xA;   version: 10&#xA;   serial: 08:60:6e:98:2a:63&#xA;   capacity: 1Gbit/s&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=on broadcast=yes driver=alx latency=0 link=no multicast=yes port=twisted pair&#xA;   resources: irq:32 memory:fe900000-fe93ffff ioport:e000(size=128)&#xA;&#xA;&#xA; *-network&#xA;   description: Ethernet interface&#xA;   physical id: 1&#xA;   logical name: enp0s16f0u2&#xA;   serial: 82:1d:5c:dd:6f:bb&#xA;   capabilities: ethernet physical&#xA;   configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.145 link=yes multicast=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7287" LastActivityDate="2018-12-29T09:00:55.190" Title="Loki Wifi keep turning off on ASUS X45U Laptop" Tags="|release-loki|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9139" PostTypeId="2" ParentId="9108" CreationDate="2016-11-07T18:04:47.577" Score="0" Body="&lt;p&gt;If your file is an ordinary Windows .bat file, you can rename &lt;code&gt;*.bat&lt;/code&gt; file to &lt;code&gt;*.text&lt;/code&gt; and open it by any text editor.&lt;/p&gt;&#xA;" OwnerUserId="7288" LastActivityDate="2016-11-07T18:04:47.577" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9140" PostTypeId="1" CreationDate="2016-11-07T18:55:14.827" Score="5" ViewCount="503" Body="&lt;p&gt;Prior to Loki, you were shown details about what was getting updated.  Is there a way in Loki AppCenter to see the specifics prior to clicking the update button?&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-11-30T07:37:37.477" Title="How to see update details" Tags="|release-loki|updates|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9141" PostTypeId="1" CreationDate="2016-11-07T20:42:24.483" Score="2" ViewCount="377" Body="&lt;p&gt;I did my backups with back in time before I moved to Elementary.&#xA;Now I installed back in time and I do have to start the (root)-version - but it won´t start.&#xA;How do I get the thing running?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="6317" LastEditorUserId="578" LastEditDate="2016-11-12T19:42:09.440" LastActivityDate="2016-11-12T19:42:09.440" Title="Back in time on Elementary OS" Tags="|software-installation|backup|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9142" PostTypeId="2" ParentId="6823" CreationDate="2016-11-07T21:12:42.573" Score="-1" Body="&lt;p&gt;I came across this and it worked for me, it should work for you to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, update your kernel to the latest long-term support:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-generic-lts-wily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, download these two firmware files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453553/+files/AthrBT_0x11020100.dfu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453553/+files/AthrBT_0x11020100.dfu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453554/+files/ramps_0x11020100_40.dfu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453554/+files/ramps_0x11020100_40.dfu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And put them in: &lt;code&gt;/lib/firmware/ar3k/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot, and then rejoice!&lt;/p&gt;&#xA;" OwnerUserId="6035" LastEditorUserId="6035" LastEditDate="2016-11-07T21:28:02.947" LastActivityDate="2016-11-07T21:28:02.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9144" PostTypeId="2" ParentId="7674" CreationDate="2016-11-07T21:56:13.677" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;Create a script to run viber:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /usr/local/bin/viber-start&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;put into it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#!/bin/bash&#xA;VIBER_USE_LIBAPPINDICATOR=1 XDG_CURRENT_DESKTOP=Unity  /opt/viber/Viber&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Make it executable&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;chmod +x /usr/local/bin/viber-start&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Open viber.desktop&#xA;&lt;code&gt;sudo nano /usr/share/applications/viber.desktop&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;and replace the contents of a file to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Viber&#xA;Comment=Viber VoIP and messenger&#xA;Exec=viber-start&#xA;Icon=/usr/share/pixmaps/viber.png&#xA;Terminal=false&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Categories=Network;Application;&#xA;Path=&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Logout the system&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7289" LastActivityDate="2016-11-07T21:56:13.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9146" PostTypeId="1" CreationDate="2016-11-08T00:37:01.413" Score="0" ViewCount="13620" Body="&lt;p&gt;I removed lightdm and all its config files in the different directories (don't ask).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I restore it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary boots into text mode right now.&lt;/p&gt;&#xA;" OwnerUserId="7143" LastActivityDate="2019-06-12T19:46:56.920" Title="How to completely reinstall lightdm?" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9148" PostTypeId="2" ParentId="9146" CreationDate="2016-11-08T04:41:53.067" Score="2" Body="&lt;p&gt;It depends on what all you deleted. The reinstall command from the command line is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall packagename&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;lightdm package is &quot;lightdm&quot; loki also uses &quot;pantheon-greeter&quot;. Try reinstalling those two. &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-08T04:41:53.067" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9149" PostTypeId="2" ParentId="9138" CreationDate="2016-11-08T05:04:18.583" Score="1" Body="&lt;p&gt;You seem to be affected by a bug described &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2181558&quot; rel=&quot;nofollow noreferrer&quot;&gt;here.&lt;/a&gt; There is a workaround, but it doesn't fix the fn+f2 issue. See the link for full details, but here is a quick run down of what you should do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -nnk | grep -A2 0280&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will show if you have a kernel driver in use and what it is called. You're looking for something like Kernel driver in use:ath9k.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsmod | grep -e ath9k -e asus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace ath9k with your driver's name. This should show that the driver is loaded and show if asus_nb_wmi driver is being used. Assuming that asus_nd_wmi is being used run the following command and reboot.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options asus_nb_wmi wapf=4&quot; | sudo tee /etc/modprobe.d/asus_nb_wmi.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Every boot will force asus_nb_wmi to use wapf=4, which is reported to fix the hardblock issue you have.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-08T05:04:18.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9154" PostTypeId="1" CreationDate="2016-11-08T14:29:13.680" Score="0" ViewCount="4848" Body="&lt;p&gt;sudo apt-get update command is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Translated  into English (Google):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Error: 7 &lt;a href=&quot;http://en.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://en.archive.ubuntu.com/ubuntu&lt;/a&gt; xenial InRelease&#xA;  tr.archive.ubuntu.com:80 link can not be started (2001: a98: 11 ::&#xA;  100). -  connect (101: Network not available) [IP: 2001: a98: 11 ::&#xA;  100 80] Error: 8 &lt;a href=&quot;http://en.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://en.archive.ubuntu.com/ubuntu&lt;/a&gt; xenial-updates&#xA;  InRelease tr.archive.ubuntu.com:80 link can not be started (2001: a98:&#xA;  11 :: 100). - connect (101: Network not available) [IP: 2001: a98: 11&#xA;  :: 100 80] Error: 9 &#xA;  xenial-backports InRelease&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Can you help?&lt;/p&gt;&#xA;" OwnerUserId="7267" LastEditorUserId="37" LastEditDate="2016-11-08T15:59:32.073" LastActivityDate="2019-04-18T15:49:27.953" Title="apt-get update error &quot;Network is unreachable&quot;" Tags="|updates|repositories|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9157" PostTypeId="2" ParentId="7018" CreationDate="2016-11-08T19:49:36.783" Score="0" Body="&lt;p&gt;You definitely do not have proper video driver. I have &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8489/intel-graphics-performance-on-loki&quot;&gt;the same problem&lt;/a&gt; on Intel (not Radeon) hardware.&lt;br&gt;&#xA;I recommend to &lt;a href=&quot;https://askubuntu.com/questions/283345/how-to-install-drivers-for-amd-radeon-hd-7850#283360&quot;&gt;install the drivers&lt;/a&gt; as it is done on Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="575" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-11-08T19:49:36.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9159" PostTypeId="1" CreationDate="2016-11-09T00:21:25.997" Score="3" ViewCount="1726" Body="&lt;p&gt;How can I create a network share between Elementary OS and OS/X?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In OS/X I see no hint of Elementary on the network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Elementary I see two entries for my MBP under &lt;code&gt;Network|Entire Network&lt;/code&gt;. &#xA;Both of these options both prompt me for a password with a dialog that specifies &lt;code&gt;Domain=WORKGROUP&lt;/code&gt; (which seems very windowsy to me). After putting in the correct password, I'm told that the password is wrong. If I set Domain to blank, the connect button is disabled.&lt;/p&gt;&#xA;" OwnerUserId="7305" LastActivityDate="2017-04-19T09:17:40.943" Title="Network sharing with OSX" Tags="|networking|filesystem|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9161" PostTypeId="1" CreationDate="2016-11-09T03:21:11.980" Score="2" ViewCount="962" Body="&lt;p&gt;After a fresh install and both &lt;code&gt;upgrade&lt;/code&gt; and &lt;code&gt;dist-upgrade&lt;/code&gt; of Elementary OS Loki I try to lock and then unlock my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the screen is locked, when trying to unlock, screen turns to black and doesn't show me the password prompt to unlock, only the mouse pointer. I hace to restart LightDM every time in order to get a session back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a Gateway NV55C Laptop with an Intel HD 4000 graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Do you know what the problem is?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Do you know a fix for it?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="7306" LastEditorUserId="7306" LastEditDate="2016-11-09T12:12:12.637" LastActivityDate="2023-12-10T18:08:51.060" Title="Can not unlock screen in Loki" Tags="|release-loki|greeter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9162" PostTypeId="1" CreationDate="2016-11-09T10:27:23.653" Score="1" ViewCount="89" Body="&lt;p&gt;I'm trying to copy the folder &quot;amber14sb.ff&quot; (/home/gustavo/ComputationalChemistry/amber14sb.ff/) to the folder &quot;top&quot; (/usr/local/gromacs/share/gromacs/top/). I did it by using &lt;code&gt;sudo cp -r /home/gustavo/ComputationalChemistry/amber14sb.ff /usr/local/gromacs/share/gromacs/top/&lt;/code&gt;, but the copied folder becomes not readable, and the program I'm trying to use doesn't recognize it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I properly copy and paste in this system folder? Or how can I turn the copied folder readable?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Obs.: I'm on Elementary OS Loki&lt;/p&gt;&#xA;" OwnerUserId="7308" LastActivityDate="2016-12-09T22:19:42.820" Title="How can one properly paste a folder in a system folder?" Tags="|system|folder|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9164" PostTypeId="1" CreationDate="2016-11-09T11:59:26.980" Score="2" ViewCount="115" Body="&lt;p&gt;As I wrote in the title, everytime I launch Loki's file manager it starts writing and deleting a random ~/.config/dconf/user file, causing an excessive disk activity.&#xA;Is there anyone experiencing the same issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="7310" LastActivityDate="2016-11-10T19:58:38.933" Title="Loki's file manager repeatedly creates a random ~/.config/dconf/user file" Tags="|release-loki|pantheon-files|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9165" PostTypeId="1" CreationDate="2016-11-09T12:12:00.357" Score="2" ViewCount="231" Body="&lt;p&gt;After adding my Google Account to maya I want to reset the Application. But there's no possibility to delete the shown calendars!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anny ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="7311" LastActivityDate="2016-11-12T09:49:40.097" Title="How to delete Google Calendars in Maya (Loki 0.4)?" Tags="|calendar|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9166" PostTypeId="1" CreationDate="2016-11-09T12:13:38.933" Score="1" ViewCount="1435" Body="&lt;p&gt;When I first installed eOS the boot up was 'silent' ie no screen activity until the log-in screen was reached.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it gives a verbose list of everything that's being loaded which is not a serious issue but somewhat annoying. I guess I may have altered something that started this. Can anyone tell me how to stop this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: Having dug deeper and tried different GRUB settings, it isn't showing a full verbose listing, just a list of the services starting. I'd still like to switch that off if possible.&lt;/p&gt;&#xA;" OwnerUserId="7295" LastEditorUserId="7295" LastEditDate="2016-11-09T16:06:03.053" LastActivityDate="2017-04-28T12:08:57.517" Title="Verbose boot up" Tags="|release-loki|boot|grub|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9167" PostTypeId="1" AcceptedAnswerId="9208" CreationDate="2016-11-09T13:46:35.210" Score="4" ViewCount="143" Body="&lt;p&gt;I have an old notebook with a 1280x800 display and when I try to change an existing email account's configuration, the configuration dialog doesn't completely fit into the screen.&#xA;Bye.&lt;/p&gt;&#xA;" OwnerUserId="7310" LastActivityDate="2016-11-12T09:18:22.507" Title="Pantheon-mail account configuration dialog doesn't fit in low-res displays" Tags="|release-loki|pantheon-mail|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9169" PostTypeId="2" ParentId="9162" CreationDate="2016-11-09T21:50:25.550" Score="1" Body="&lt;p&gt;The folder permissions do not allow the application to read or write so you want to change the permissions not preserve them. After you can the folder you need to run chmod to allow it to allow read/write from no root users. You can also chown to change ownership from root to your user name. Try&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo chmod -R 755 /home/gustavo/ComputationalChemistry/amber14sb.ff &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo chown -R gustavo /home/gustavo/ComputationalChemistry/amber14sb.ff &lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-09T21:50:25.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9171" PostTypeId="1" CreationDate="2016-11-10T03:12:25.770" Score="0" ViewCount="1211" Body="&lt;p&gt;I don't know what I did but the app center no longer works. When I try to install something it says waiting and then install comes back up. Also in the terminal whenever I type in a Audi command it says that it's unknown.&lt;/p&gt;&#xA;" OwnerUserId="7319" LastActivityDate="2016-12-10T08:21:03.117" Title="How do I if possible, master reset?" Tags="|release-loki|pantheon-terminal|appcenter|" AnswerCount="1" CommentCount="2" ClosedDate="2016-12-11T01:23:20.057" ContentLicense="CC BY-SA 3.0" />
  <row Id="9172" PostTypeId="1" AcceptedAnswerId="9177" CreationDate="2016-11-10T06:31:48.753" Score="3" ViewCount="1618" Body="&lt;p&gt;So, I'm completely new to Linux, and I have to learn the basic, but I can't make custom commands work in hot corners! Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="7320" LastActivityDate="2016-11-10T09:41:15.283" Title="How can I set my top right hotcorner to open Terminal?" Tags="|hot-corners|gnome-terminal|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9173" PostTypeId="2" ParentId="9166" CreationDate="2016-11-10T07:24:23.363" Score="0" Body="&lt;p&gt;Have you tried customize the GRUB?&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo nano /etc/default/grub&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Remove below values&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then update the GRUB&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="7321" LastActivityDate="2016-11-10T07:24:23.363" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9174" PostTypeId="2" ParentId="9171" CreationDate="2016-11-10T07:28:23.010" Score="0" Body="&lt;p&gt;Try running &lt;code&gt;sudo apt-get update&lt;/code&gt; in the terminal, it worked for me at least.&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-10T07:28:23.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9176" PostTypeId="2" ParentId="9159" CreationDate="2016-11-10T07:45:23.203" Score="1" Body="&lt;p&gt;Ok, all you need is &lt;strong&gt;samba&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You have to install it first:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install samba samba-common system-config-samba python-glade2 gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;create special user for sharing files, open the application from slingshot and configure the shared folder;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;and don't forget to restart the services&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo restart smbd &amp;amp;&amp;amp; sudo restart nmbd&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7322" LastEditorUserId="578" LastEditDate="2017-04-19T09:17:40.943" LastActivityDate="2017-04-19T09:17:40.943" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9177" PostTypeId="2" ParentId="9172" CreationDate="2016-11-10T08:13:10.947" Score="1" Body="&lt;p&gt;try setting the custom command to &lt;code&gt;gnome-terminal&lt;/code&gt;, your might have to install it first though. In case of the last use &lt;code&gt;sudo apt install gnome-terminal&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-11-10T08:13:10.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9178" PostTypeId="2" ParentId="9172" CreationDate="2016-11-10T09:41:15.283" Score="3" Body="&lt;p&gt;You can set in Settings/Desktop under the &lt;em&gt;Hot Corners&lt;/em&gt; tab (I put &lt;code&gt;pantheon-terminal&lt;/code&gt; but you can choose &lt;code&gt;gnome-terminal&lt;/code&gt; as well if you have installed it):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DeGUF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DeGUF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-10T09:41:15.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9179" PostTypeId="2" ParentId="9034" CreationDate="2016-11-10T14:07:51.847" Score="0" Body="&lt;p&gt;I don't know the reason of the bug but I found out how to solve it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I install &lt;code&gt;dconf-editor&lt;/code&gt; to be able to manage more easily for editing the dconf system database.&#xA;I went throught org-&gt;pantheon-&gt;mail and disable autoselect (true by default).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And voila !&lt;/p&gt;&#xA;" OwnerUserId="7016" LastActivityDate="2016-11-10T14:07:51.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9180" PostTypeId="2" ParentId="3406" CreationDate="2016-11-10T15:41:07.793" Score="1" Body="&lt;p&gt;You might want to start the elementary OS live mode from the installation medium so that you can check &lt;em&gt;System Settings&lt;/em&gt;/&lt;em&gt;Displays&lt;/em&gt; to fix this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even if you cannot fix the resolution you can move the installation window if you drag it with the windows key held down.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-10T15:41:07.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9181" PostTypeId="1" CreationDate="2016-11-10T16:30:37.710" Score="0" ViewCount="216" Body="&lt;p&gt;I'm on Freya. Scratch editor can't load (large?) binary files. It get stuck. Then if I force-close the app, when reopening it, it tries to restore the session and get stuck again. How can I 'recover' it ?&lt;/p&gt;&#xA;" OwnerUserId="5056" LastEditorUserId="7149" LastEditDate="2018-02-09T17:37:50.530" LastActivityDate="2018-02-09T17:37:50.530" Title="Scratch editor binary file load and session restoring problems" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9185" PostTypeId="2" ParentId="9166" CreationDate="2016-11-10T18:51:15.297" Score="0" Body="&lt;p&gt;it sounds to me like you are starting a different line item in grub that does not have quiet on it.&#xA;suggestion ... when you are booting ... hold down the right shift key&#xA;This should bring up a grub menu&#xA;are you pointed at the topmost entry?&#xA;you can edit (temporarily) an entry by hitting 'e'&#xA;the quiet should be on the line with /vmlinuz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you are not pointint to the top entry ... up arrow to that and hiut 'e' to see whats there ... and see if quiet is on the line there&#xA;if so just boot that entry and you should be fine.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-11-10T18:51:15.297" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9187" PostTypeId="2" ParentId="9141" CreationDate="2016-11-10T19:07:22.923" Score="2" Body="&lt;p&gt;You can start it from a terminal with &lt;code&gt;pkexec backintime-qt4&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually as a bugfix you can create a script &lt;code&gt;/usr/local/bin/backintime-pkexec&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;pkexec &quot;/usr/bin/backintime-qt4&quot; &quot;$@&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Save these lines as &lt;code&gt;/usr/local/bin/backintime-pkexec&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Make it executable: &lt;code&gt;chmod +x /usr/local/bin/backintime-pkexec&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;And finally replace in the file &lt;code&gt;/usr/share/applications/backintime-qt4-root.desktop&lt;/code&gt; the line &lt;code&gt;Exec=pkexec backintime-qt4&lt;/code&gt; to &lt;code&gt;Exec=/usr/local/bin/backintime-pkexec&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-10T19:07:22.923" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9188" PostTypeId="2" ParentId="9164" CreationDate="2016-11-10T19:58:38.933" Score="3" Body="&lt;p&gt;Files stores a number of settings in the ~./config/user file (run dconf-editor and navigate to  org/pantheon/files to see them).  Some of these settings are updated in real time as you change e.g. the zoom level or show/hide hidden files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I have discovered using inotifywatch that this file is continually changing, as you report, while Files is open even with no user interaction so this appears to be a bug. I will raise it in Launchpad.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-11-10T19:58:38.933" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9190" PostTypeId="2" ParentId="9181" CreationDate="2016-11-11T00:47:39.873" Score="2" Body="&lt;p&gt;You could try moving those binary files to some other directory or just changing their names. Then open up scratch and it wont try to open those files. After that you can just move back those files or change back their names.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find a nicer solution in the answer by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3757/suici-doga&quot;&gt;Suici Doga&lt;/a&gt; of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3000/scratch-is-not-responding-when-i-try-to-edit-a-file?rq=1&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7149" LastEditorUserId="7149" LastEditDate="2016-11-11T01:07:46.287" LastActivityDate="2016-11-11T01:07:46.287" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9191" PostTypeId="2" ParentId="9101" CreationDate="2016-11-11T02:08:21.730" Score="0" Body="&lt;p&gt;openvpn seems to have some troubles getting the things right, I managed to log in to vpn service with pptp protocol ( seems it's doing the right setup ) &lt;/p&gt;&#xA;" OwnerUserId="7334" LastActivityDate="2016-11-11T02:08:21.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9192" PostTypeId="1" CreationDate="2016-11-11T02:38:06.780" Score="0" ViewCount="783" Body="&lt;p&gt;Me: total noob. Experience: unix system and network manager 30 years ago. Have not used unix or linux since then. Installed loki a couple weeks ago on an old PC box.  A few days ago my printers disappeared.  Canon 922 wireless was working before that.  Tried to reconfigure cups but got msg that cups was broken or not installed.  purged cups and configuration files.  Now I don't know how to reinstall cups. What commands do I use to reinstall cups?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My canon 922 still works on my PC notebook with loki installed.&lt;/p&gt;&#xA;" OwnerUserId="7335" LastActivityDate="2016-11-11T08:08:08.127" Title="loki: reinstall the cups package" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9193" PostTypeId="1" CreationDate="2016-11-11T06:55:03.503" Score="0" ViewCount="105" Body="&lt;p&gt;Total newby and definitely not a pc expert with a dreadfully slow Lenovo looked for a way to still use an ageing laptop. Found Elementary, struggled through the setup procedure as it was all new to me, and then tried Freya on my Lenovo 3000 n200 on usb disk. It seemed to work fine, the laptop was responsive enough, hurray! So I made the switch to Elementary instead of Windows Vista. Again struggled through the procedures and managed to destroy the pre-installed Windows in the process... told you I'm not an expert. In the end I found instructions somewhere on the net to format the internal disk in partitions or something and did a clean install. Since Freya had been replaced with Loki, it installed Loki for me. Although everything seems to work... it is sloooow. Been looking for solutions and think it's just too old and too little ram to run Loki. So would like to reinstall Frey (yes I formatted the USB which had Freya on it as well...) but can't find it anywhere on the Elementary website. I even read that Elementary is no longer supporting older systems? If that's true then they're as bad as Apple... I found some Torrents, whatever they are, but read warnings about malicious things in there? Some come with MD5 codes (no idea what they are or what to do with them). Would like to try Freya 32 bit, as I had on the USB stick. How do I go about it and... may I suggest to the Elementary team that making an easy to use 'installer' for the people who aren't computer wizz kids might be an Elementary requirement for the next Elementary update?&lt;/p&gt;&#xA;" OwnerUserId="7336" LastActivityDate="2016-11-11T13:19:01.610" Title="Revert back to Freya" Tags="|release-freya|" AnswerCount="1" CommentCount="1" ClosedDate="2016-11-23T02:20:33.543" ContentLicense="CC BY-SA 3.0" />
  <row Id="9194" PostTypeId="2" ParentId="9192" CreationDate="2016-11-11T08:08:08.127" Score="2" Body="&lt;p&gt;You can (re)install &lt;code&gt;cups&lt;/code&gt; with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install cups&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-11T08:08:08.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9195" PostTypeId="2" ParentId="6760" CreationDate="2016-11-11T11:20:03.930" Score="2" Body="&lt;p&gt;Useragent of Loki default web-browser (Epiphany) is &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-os/elementaryos/os-patch-epiphany-browser-xenial/revision/4&quot; rel=&quot;nofollow noreferrer&quot;&gt;branded&lt;/a&gt; as elementary OS now:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/602.1 (KHTML, like Gecko) Version/8.0 Safari/602.1 elementary OS/0.4 (Loki) Epiphany/3.18.5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Probably to achieve the same effect for third-party browsers from Ubuntu repositories (Firefox or Chromium for example) elementary OS developers need to place packages with related patches in &lt;code&gt;os-patches&lt;/code&gt; PPA. But I don't think that same trick is possible with third-party proprietary browsers (Chrome or Opera for example).&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="160" LastEditDate="2016-11-11T20:55:21.697" LastActivityDate="2016-11-11T20:55:21.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9196" PostTypeId="2" ParentId="9193" CreationDate="2016-11-11T13:19:01.610" Score="0" Body="&lt;p&gt;Well, you are right, they do not permit to download the old version from the official site.&lt;br&gt;&#xA;Anyway, here is the sourceForge &lt;a href=&quot;https://sourceforge.net/projects/elementaryos/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="575" LastActivityDate="2016-11-11T13:19:01.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9197" PostTypeId="2" ParentId="6760" CreationDate="2016-11-11T17:01:26.077" Score="2" Body="&lt;p&gt;The versions of Firefox and Chromium in the AppCenter are packaged by the Ubuntu developers. I would be surprised if the elementary team packaged their own custom versions of these applications in the future; their focus seems to be on the included Epiphany browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like elementary to show up in your user agent string, you can use Epiphany as Maxim suggested, or use a user agent switcher plugin. &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;User Agent Switcher for Firefox&lt;/a&gt; and &lt;a href=&quot;https://chrome.google.com/webstore/detail/user-agent-switcher/lkmofgnohbedopheiphabfhfjgkhfcgf&quot; rel=&quot;nofollow noreferrer&quot;&gt;User-Agent Switcher for Chrome/Chromium&lt;/a&gt; should do the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All that said, many analytics packages summarize things down to Windows, macOS, and Linux. As a web developer, I keep an eye on analyltics for Linux but don't typically break things down by distro. Linux as a whole represents about &lt;a href=&quot;https://linux.slashdot.org/story/16/07/02/184229/linux-grabs-more-than-2-of-desktop-market-share&quot; rel=&quot;nofollow noreferrer&quot;&gt;2-3 percent of traffic&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like to encourage web developers to improve support for Linux browsers, just browsing with the default user agent string should do the trick! :)&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-11T17:01:26.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9198" PostTypeId="1" CreationDate="2016-11-11T18:48:16.117" Score="2" ViewCount="798" Body="&lt;p&gt;I'd like to make the scrollbars wider on Loki (I assume that is the latest version of elementaryOS), but the thread mentioned below suggests that the solution varies according to the version of elementaryOS. What do I need to do for Loki?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I'd add a comment to existing thread &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/269/how-can-i-make-the-scrollbars-thicker&quot;&gt;How can I make the scrollbars thicker?&lt;/a&gt;&#xA;but apparently I need 50 reputation to do so and I haven't got that.&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2016-11-12T23:43:32.527" LastActivityDate="2017-03-20T12:16:43.907" Title="How can I make the scrollbars thicker - in Loki?" Tags="|scrollbars|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9199" PostTypeId="2" ParentId="8765" CreationDate="2016-11-11T20:13:45.863" Score="1" Body="&lt;p&gt;Try running &lt;code&gt;im-config&lt;/code&gt; in a terminal, then continue until you can select the ibus option. (&lt;strong&gt;this will allow to use ibus as imput method&lt;/strong&gt;). when finished, add &lt;code&gt;ibus-daemon -drx&lt;/code&gt; to startup applications then restart your session and you should be able to use all the configuration you have made about ibus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i recomend you to disable the app-laucher shortcut in order to use the switching shortcut for ibus.&lt;/p&gt;&#xA;" OwnerUserId="7342" LastEditorUserId="7342" LastEditDate="2016-11-12T05:05:50.337" LastActivityDate="2016-11-12T05:05:50.337" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9200" PostTypeId="2" ParentId="8489" CreationDate="2016-11-11T21:47:00.440" Score="3" Body="&lt;p&gt;The Intel Graphics has some settings you can fine-tune to improve performance or powersavings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short, if you want the best performance create &lt;code&gt;/etc/modprobe.d/i915.conf&lt;/code&gt; as &lt;strong&gt;root&lt;/strong&gt; and add &lt;code&gt;options i915  powersave=0 enable_rc6=0 enable_fbc=0&lt;/code&gt; to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want more settings or a further understanding of this options just write on a terminal &lt;code&gt;modinfo -p i915&lt;/code&gt; .&lt;br&gt;&#xA;Then, to add any extra setting just do it following the scheme of &lt;code&gt;setting=number&lt;/code&gt; or &lt;code&gt;setting=true/false&lt;/code&gt; (in case it's a boolean)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/intel_graphics&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-11T21:47:00.440" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="9201" PostTypeId="1" AcceptedAnswerId="9224" CreationDate="2016-11-11T21:55:32.743" Score="0" ViewCount="82" Body="&lt;p&gt;After a recent update or maybe after connecting to a TTLS  wifi network my boot time increased in 10 seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could make it faster by disabling &quot;Connect automatically to this network&quot; on the Network panel but that breaks the functionality since I have to connect manually to every network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So is there a way to fix it without breaking my system? This issue started today (or maybe yesterday) and the only things that could trigger it are a system upgrade or the connection to said TTLS network.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-13T10:43:27.537" Title="NetworkManager is delaying my boot. How can I solve it without breaking functionality?" Tags="|boot|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9204" PostTypeId="1" CreationDate="2016-11-12T01:46:55.830" Score="3" ViewCount="569" Body="&lt;p&gt;After a clean installation of Elementary Loki, there is an error message during the booting that does not allow me run Elementary. &quot;Cannot find any operational system&quot;. As I am not an expert, the only solution I found was change Legacy instead of UEFI inside the BIOS, and wallah! is working now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, although is working now I suppose something is wrong with my GRUB and I should fix it to be able to boot Elementary with UEFI. I would really appreciate any orientation about how to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This question it was already posted here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7856/force-uefi-installation&quot;&gt;Force UEFI installation?&lt;/a&gt; but unfortunately did not find a real solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Some additional information: Elementary is the only OS I'm running in my laptop right now. However, previously the laptop was using Windows 10 that came in for default. My laptop is a Sony Vaio, S series.&lt;/p&gt;&#xA;" OwnerUserId="7346" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2018-12-19T00:03:30.677" Title="After instalation, boot error message: can not find any operational system" Tags="|release-loki|boot|uefi|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9206" PostTypeId="1" CreationDate="2016-11-12T06:08:47.260" Score="7" ViewCount="7494" Body="&lt;p&gt;I have installed nautilus to enable desktop icons in &lt;strong&gt;elementary OS Loki&lt;/strong&gt;. It works fine but is there any way to add a button that can I use to click and show desktop? Like the ones in &lt;strong&gt;Windows&lt;/strong&gt; at right bottom corner?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any command that I can write in &lt;code&gt;Custom Command&lt;/code&gt; box in Hot Corners settings?&lt;/p&gt;&#xA;" OwnerUserId="7347" LastEditorUserId="160" LastEditDate="2016-11-12T21:34:04.090" LastActivityDate="2019-05-03T20:45:11.480" Title="How to add &quot;Show Desktop&quot; icon in elementary OS?" Tags="|keyboard-shortcuts|desktop|show-desktop|hot-corners|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9207" PostTypeId="2" ParentId="9206" CreationDate="2016-11-12T07:36:17.687" Score="11" Body="&lt;p&gt;There are two easy options.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + right click on plank and go to preferences. There is a show desktop docklet.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Hot corner solution. Install wmctrl&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install wmctrl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can use &lt;code&gt;wmctrl -k on&lt;/code&gt; in the custom command box.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="160" LastEditDate="2016-11-12T21:32:05.690" LastActivityDate="2016-11-12T21:32:05.690" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9208" PostTypeId="2" ParentId="9167" CreationDate="2016-11-12T09:18:22.507" Score="4" Body="&lt;p&gt;As a workaround, you can move the dialog with &lt;kbd&gt;Win&lt;/kbd&gt;+mouse drag.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-12T09:18:22.507" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9209" PostTypeId="2" ParentId="9165" CreationDate="2016-11-12T09:49:40.097" Score="1" Body="&lt;p&gt;You can hover over the calendar name in the gear menu (top right) and a trash icon appears. However, there are two special system calendars (Birthdays&amp;amp;Anniversaries / Personal) that you cannot delete but  hide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AEBH1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AEBH1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-12T09:49:40.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9210" PostTypeId="2" ParentId="9017" CreationDate="2016-11-12T10:11:08.753" Score="1" Body="&lt;p&gt;This is a known bug, you can mark &quot;it affects me as well&quot; in the bug tracker: &lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1355090&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/maya/+bug/1355090&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-12T10:11:08.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9212" PostTypeId="2" ParentId="7409" CreationDate="2016-11-12T14:52:36.280" Score="0" Body="&lt;p&gt;You might want to use an elementary OS install CD/USB key to boot up a live system and check if &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;you can repair your installation,&lt;/li&gt;&#xA;&lt;li&gt;you can save the files you need to an external disk drive.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-12T14:52:36.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9215" PostTypeId="1" CreationDate="2016-11-12T17:49:36.777" Score="1" ViewCount="262" Body="&lt;p&gt;I am running Elementary OS Loki and I love it! I have downloaded tweaks and have changed my icons to the numix ones. However, I would like to change the buttons to look more like the ones on Mac OS but not change the rest. I have downloaded this: &lt;a href=&quot;https://www.gnome-look.org/content/show.php/OS+X+El+Capitan+(GTK,+Unity+&amp;amp;+Cinnamon)?content=174139&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.gnome-look.org/content/show.php/OS+X+El+Capitan+(GTK,+Unity+&amp;amp;+Cinnamon)?content=174139&lt;/a&gt; and have tried to take some parts from the CSS files and move them over to a copy of the elementary theme, but I do not know what to edit. I tried to modify the buttons-section in the gtk-widgets.css file without much success. So, I now ask you for any solutions.&lt;/p&gt;&#xA;" OwnerUserId="7354" LastActivityDate="2016-11-12T17:49:36.777" Title="Modify titlebar buttons" Tags="|release-loki|pantheon|tweak-tool|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9216" PostTypeId="2" ParentId="9140" CreationDate="2016-11-12T17:50:31.553" Score="1" Body="&lt;p&gt;One may fire up a terminal and issue a command prior to updating from app-center:&#xA;sudo tail -f  /var/log/apt/history.log /var/log/apt/term.log&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you will see what is going on &lt;/p&gt;&#xA;" OwnerUserId="7241" LastActivityDate="2016-11-12T17:50:31.553" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9217" PostTypeId="1" CreationDate="2016-11-12T18:13:49.817" Score="2" ViewCount="234" Body="&lt;p&gt;I don't know if when can, but I would like when I press Power Button to ask me my choice (shutdown/reboot/cancel).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I search on dconf but there is no value for choice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sorry for my english !&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-12-06T18:43:59.203" Title="How to bind power button to choice what I want" Tags="|release-loki|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9218" PostTypeId="1" AcceptedAnswerId="9219" CreationDate="2016-11-12T18:26:44.680" Score="2" ViewCount="355" Body="&lt;p&gt;Marlin and Pantheon Files look similar—are they the same?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't find a good explanation anywhere else.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-11-12T18:26:44.680" Title="What are the differences between Marlin and Pantheon Files?" Tags="|pantheon-files|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9219" PostTypeId="2" ParentId="9218" CreationDate="2016-11-12T18:26:44.680" Score="1" Body="&lt;p&gt;The two look similar because elementary &lt;a href=&quot;http://archive.is/Stiqp&quot; rel=&quot;nofollow noreferrer&quot;&gt;forked&lt;/a&gt; Pantheon Files from Marlin &lt;a href=&quot;https://answers.launchpad.net/marlin/+question/193884&quot; rel=&quot;nofollow noreferrer&quot;&gt;in 2012&lt;/a&gt; &lt;a href=&quot;https://web.archive.org/web/20121025053951*/http://2buntu.com/2012/04/26/marlin-is-dead-maintainer-needed/&quot; rel=&quot;nofollow noreferrer&quot;&gt;after&lt;/a&gt; the lead dev lost interest in the project. The dev &lt;a href=&quot;https://answers.launchpad.net/marlin/+question/227968&quot; rel=&quot;nofollow noreferrer&quot;&gt;posted in May 2013&lt;/a&gt; that the two were indistinguishable apart from some text changes and the removal of settings. (The dev had other thoughts on the politics of the project.) The Marlin project was &lt;a href=&quot;https://code.launchpad.net/marlin/+code?field.lifecycle=CURRENT&amp;amp;field.lifecycle-empty-marker=1&amp;amp;field.sort_by=most+recently+changed+first&amp;amp;field.sort_by-empty-marker=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;last updated&lt;/a&gt; a month prior (April 2013), so it's safe to say that, even with its bugs, Files has subsumed its predecessor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon Files works on other distributions, such as &lt;a href=&quot;https://decathorpe.com/2016/11/06/a-report-on-packaging-pantheon-for-fedora/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fedora&lt;/a&gt;, though they may not be specifically supported.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastActivityDate="2016-11-12T18:26:44.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9221" PostTypeId="1" CreationDate="2016-11-13T02:40:07.207" Score="3" ViewCount="420" Body="&lt;p&gt;What is the best way to remap Alt+ijkl to produce up/left/down/right arrow key presses? So far I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;xbindkeys/Gnome keyboard shortcut settings + xte/xdotool/xmacro&lt;/strong&gt;. Both xbindkeys and the Gnome keyboard shortcut settings can launch other programs just fine, and xte/xdotool/xmacro can all generate key presses just fine from the terminal, but for whatever reason combining them doesn't work.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;xmodmap&lt;/strong&gt;. The xmodmap solutions I've seen all remap Alt to something else, so while the fake arrow keys work I can no longer use Alt for anything else.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;AutoKey&lt;/strong&gt;. Autokey works flakily (~50% of key presses).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7357" LastActivityDate="2016-11-13T02:40:07.207" Title="Remapping Alt+ijkl to arrow keys" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9222" PostTypeId="2" ParentId="9198" CreationDate="2016-11-13T03:48:40.063" Score="2" Body="&lt;p&gt;Changing scrollbar widths are the same in Loki as in Freya.  Using sudo permission, edit lines containing &quot;slider-width&quot; in the scrollbar sections of:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/themes/elementary/gtk-2.0/gtkrc&#xA;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I changed the settings to 12, but use what looks best to you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-11-13T03:48:40.063" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9224" PostTypeId="2" ParentId="9201" CreationDate="2016-11-13T10:43:27.537" Score="0" Body="&lt;p&gt;Masking &lt;code&gt;NetworkManager-wait-online.service&lt;/code&gt; decreased boot time back to normal. I'm not sure what triggered it, but everything works fine now.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemctl mask NetworkManager-wait-online.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-13T10:43:27.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9225" PostTypeId="2" ParentId="5603" CreationDate="2016-11-13T11:40:37.243" Score="1" Body="&lt;p&gt;You probably have that interference because elementary OS doesn't have noise reduction for the microphone.&lt;br&gt;&#xA;Some apps include noise reduction so you can use it on those. You also can reduce a bit the noise by decreasing the volume and/or the gain.&lt;br&gt;&#xA;To do so, open a terminal and type &lt;code&gt;alsamixer&lt;/code&gt;, then press F4 and change the volume and gain levels.&lt;br&gt;&#xA;Beware that if you change the microphone volume from any other place it will affect those settings as well.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-13T11:40:37.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9226" PostTypeId="1" CreationDate="2016-11-13T14:40:26.900" Score="2" ViewCount="295" Body="&lt;p&gt;Is it possible to open more than one instance of Files (pantheon-files)? Right now, every time i open Files new tab is created instead of new window. I use Elemntary Loki, have installed Tweaks but didn't found any setting to change this behavior.&lt;/p&gt;&#xA;" OwnerUserId="7362" LastActivityDate="2016-11-15T19:06:51.897" Title="Multiple instances of Files" Tags="|release-loki|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9227" PostTypeId="2" ParentId="9161" CreationDate="2016-11-13T15:21:11.467" Score="0" Body="&lt;p&gt;I have this sometimes. It appears as if it's just the screen that's turned off. When I type my password and press enter it turns on and I'm logged in again. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2016-11-13T15:21:11.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9229" PostTypeId="1" CreationDate="2016-11-13T16:02:40.867" Score="3" ViewCount="570" Body="&lt;p&gt;Is it a bug or is it a video card driver problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the latter what is my best option having an Asus notebook with Geforece 540m and an intel HD 3000. (Yes I have optimus).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia prime doesn't seems to work with 340 driver. nvidia-xsettings (not sure if this is the exact command) doesn't work it says &quot;nvidia is not a recognizable command&quot;&#xA;Nvidia Gui settings doesn't show anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No I won't use VLC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for anyone helping me!&lt;/p&gt;&#xA;" OwnerUserId="3228" LastActivityDate="2016-11-13T16:55:55.390" Title="Subtitle not shown in Videos" Tags="|nvidia|videos|subtitles|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9230" PostTypeId="2" ParentId="9229" CreationDate="2016-11-13T16:55:55.390" Score="1" Body="&lt;p&gt;That has nothing to do with your graphics card. Are you sure the file you are trying to play has subtitles? Or are you trying to open  a subtitle file?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you have your graphics drivers correctly installed you should have a &lt;code&gt;NVIDIA X Server Settings&lt;/code&gt; icon in your Applications menu. The correct console command is &lt;code&gt;nvidia-settings&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-13T16:55:55.390" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9231" PostTypeId="2" ParentId="7293" CreationDate="2016-11-13T17:05:19.900" Score="1" Body="&lt;p&gt;You cannot really change installation path as unixes use a fixed file system hierarchy. To understand the file system layout in elementary OS you can see &lt;a href=&quot;https://askubuntu.com/questions/138547/how-to-understand-the-ubuntu-file-system-layout&quot;&gt;https://askubuntu.com/questions/138547/how-to-understand-the-ubuntu-file-system-layout&lt;/a&gt; (Ubuntu and elementary OS share the same layout).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of installing on multiple disks, you can mount them as part of your file system.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-11-17T09:31:47.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9232" PostTypeId="2" ParentId="9226" CreationDate="2016-11-13T17:21:52.690" Score="1" Body="&lt;p&gt;I am assuming it is the same for Loki (0.4)...I am running Freya (0.3.2)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;open files ... it now exists on the dock&lt;/li&gt;&#xA;&lt;li&gt;right click on files in the dock&lt;/li&gt;&#xA;&lt;li&gt;select new window&lt;/li&gt;&#xA;&lt;li&gt;you should now have a separate window for files&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2016-11-13T17:21:52.690" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9234" PostTypeId="2" ParentId="6847" CreationDate="2016-11-13T20:21:21.170" Score="2" Body="&lt;p&gt;To support legacy icons, you have to install the package &lt;code&gt;wingpanel-indicator-ayatana&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-13T20:21:21.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9235" PostTypeId="1" CreationDate="2016-11-13T20:22:19.683" Score="2" ViewCount="3599" Body="&lt;p&gt;I googled it and did my search well but I still wanted to ask people to hear some thoughts and opinions. I got an MSI laptop now and like most, I use Windows for a long time. But I'm bored a lot of using the same OS. I've been searching which Linux OS I could use and found eOS and thought that's it. I love it. I'm a intermediate programmer and coder but I'm not a pro, but I'm working on it. And I actually play hundreds of games on Steam, both old and new and keep buying. So I may call myself a gamer easily. I found out some old and new games doesn't support Linux and I'm not sure if they ever will. I also installed eOS on VirtualBox but I couldn't completely feel its sensation, its stabilization, you know what I mean? It was slow and unstable. I know it won't be the same when/if I would install it directly on my SSD. Someday soon I'll test eOS on my partitioned SSD to see its real performance. I really, really want to install it in place of Windows but I sadly got doubts. I'm sure I can get used to it but should I? How's its gaming and daily performance. Will I always have to deal with some problems or will there be so many troubles that will make my day awful and let me search codes online for hours and ask here questions? Will all of my drivers work (GTX 950M - i5 4210U - Intel HD 4600 etc. [MSI GP62-2QE])? How will I make unsupported softwares work, such as SteelSeries Engine 3 and some not-well-known, made in PRC keyboard's software etc.? Please let me hear what you people think. What would you do? Thank you already!&lt;/p&gt;&#xA;" OwnerUserId="7363" LastEditorUserId="7363" LastEditDate="2016-11-13T22:05:10.647" LastActivityDate="2016-11-14T00:16:13.903" Title="Is elementary OS performance suitable for Games and Steam?" Tags="|release-loki|drivers|steam|games|performance|" AnswerCount="2" CommentCount="1" ClosedDate="2016-11-23T11:30:36.287" ContentLicense="CC BY-SA 3.0" />
  <row Id="9236" PostTypeId="2" ParentId="5193" CreationDate="2016-11-13T20:31:15.123" Score="1" Body="&lt;p&gt;Actually &lt;code&gt;uname&lt;/code&gt; shows information about the Linux kernel. So its output should only be changed if you have built a customized kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you have a custom distribution you should put this in the &lt;code&gt;/etc/issue&lt;/code&gt; and &lt;code&gt;/etc/issue.net&lt;/code&gt; files, like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~$ cat /etc/issue&#xA;elementary OS Loki \n customized \l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-13T20:31:15.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9238" PostTypeId="2" ParentId="9235" CreationDate="2016-11-13T21:44:31.643" Score="2" Body="&lt;p&gt;Because this is a subjective question I’m sure you will get different opinions here (especially as it is an elementary OS User forum).  Firstly elementary is stable (I have similar specifications to you) and the drivers are supported.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I spend much of my time helping Windows user transition to Linux (specifically elementary) and there are clues in your question that you might not be ready.  Steam OS will work great with your GTX but will not play your old Windows catalogue.  Do some additional research and check out linux applications like &lt;a href=&quot;https://www.winehq.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;Wine&lt;/a&gt;&quot; and &lt;a href=&quot;https://www.playonlinux.com/en/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;Play on Linux&quot;&lt;/a&gt; to confirm your older games will play.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is other Windows software your rely on I also suggest you check out &lt;a href=&quot;http://alternativeto.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;alternativeto.net&lt;/a&gt; to see if there is a Linux equivalent.  If it was not for your legacy software my suggestion would have been to jump right in especially with your programming skills.  I made the decision 9 years ago, I use elementary OS everyday and my kids use Steam on it.&lt;/p&gt;&#xA;" OwnerUserId="59" LastActivityDate="2016-11-13T21:44:31.643" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9239" PostTypeId="2" ParentId="9235" CreationDate="2016-11-14T00:09:58.890" Score="1" Body="&lt;p&gt;I suggest reading these two articles since I can't be any better in stating my point of view. (I will put a extract of them for those who want to decide if the articles are worth reading):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;A couple of years ago, gaming on Linux was a joke. There were a few open source games that, while fun, were nothing compared to the Call of Dutys, Battlefields, Skyrims, and Grand Theft Autos of the day. Yes, there were a handful of people that they got their game working on Wine by spending 3 days configuring it and accepting defeat on certain features. But serious gamers never bothered to go through all that work.&#xA;  Today, things are definitely better. Ubuntu, Steam, and others are working hard on making gaming not only possible, but decent on Linux. Unfortunately though, it still has a long way to go before contending with Windows. A serious gamer could not live on Linux.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://downtoearthlinux.com/posts/11-reasons-to-avoid-linux/&quot; rel=&quot;nofollow&quot;&gt;http://downtoearthlinux.com/posts/11-reasons-to-avoid-linux/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the above article can be perceived as a hard critic against Linux there are many truths in it. On the other hand the author &quot;John Morris&quot; describes himself as a passionate Linux enthusiast. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another article, less polemical, I hope, concludes:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;I would advise you to dual boot Linux with Windows . Use Linux as your main desktop and if you want to play games, boot into Windows. This could be a compromised solution.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://itsfoss.com/linux-gaming-guide/&quot; rel=&quot;nofollow&quot;&gt;https://itsfoss.com/linux-gaming-guide/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-11-14T00:16:13.903" LastActivityDate="2016-11-14T00:16:13.903" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9242" PostTypeId="1" CreationDate="2016-11-14T06:22:44.403" Score="0" ViewCount="2765" Body="&lt;p&gt;So I just changed to Linux and I've been mostly without problems, but I've had some trouble installing drivers in this system, I have the model R7 260X/360 and I downloaded the drivers from &lt;a href=&quot;http://support.amd.com/en-us/download/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link&lt;/a&gt; and when I installed a rebooted it frozed even before the user screen, so I had to reinstall elementary again twice.&#xA;I'd like to install them as I play often, but I can't install STEAM neither, it just doesn't run after installing. Thanks for your help!&lt;/p&gt;&#xA;" OwnerUserId="7320" LastEditorDisplayName="user7151" LastEditDate="2016-11-15T05:25:04.900" LastActivityDate="2017-01-30T11:12:32.407" Title="How to install Radeon drivers on Loki" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9244" PostTypeId="1" CreationDate="2016-11-14T08:25:40.770" Score="1" ViewCount="34" Body="&lt;p&gt;There should be a lot of space that I can use.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/s3O3G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s3O3G.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2016-11-14T14:21:24.193" Title="Why does the system said that I had no more free disk space?" Tags="|disk-management|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9245" PostTypeId="2" ParentId="9242" CreationDate="2016-11-14T09:27:54.963" Score="1" Body="&lt;p&gt;I'm in the same boat. My GPU is the R9 M370X, so not exactly the same, but close.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The official proprietary drivers have been abandoned by AMD. As far as I know they just aren't working on Loki, period. There are open source drivers but I've not been able to get anything working, including the drivers you can get from that link.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's also been suggested elsewhere to upgrade the kernel from 4.4 to something newer, which I've also done, and also without success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The eOS devs aren't offering us much here except the suggestion to only use Intel GPUs. Other than that, it looks like for the time being there's not really a  solution for our problem.&lt;/p&gt;&#xA;" OwnerUserId="7235" LastActivityDate="2016-11-14T09:27:54.963" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9248" PostTypeId="2" ParentId="7018" CreationDate="2016-11-14T14:16:11.110" Score="1" Body="&lt;p&gt;Please go to the gpu site and click downloads click graphics driver select ubuntu or linux option and ur 64 bit or 32bit archetecture option that will help you out otherwise delete firefox and try reinstalling or try google chrome still the prob persists post ur reply pleaseee we are ready to help you out .&lt;/p&gt;&#xA;" OwnerUserId="7378" LastActivityDate="2016-11-14T14:16:11.110" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9251" PostTypeId="1" AcceptedAnswerId="9254" CreationDate="2016-11-14T16:16:50.230" Score="0" ViewCount="2110" Body="&lt;p&gt;Since I'm a rookie, I don't know if it's because something I did but my top bar/wingpanel disappeared. When I type wingpanel on terminal, I get following text;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(wingpanel:2526): Gtk-WARNING **: Theme parsing error: gtk.css:1:69: Not using units is deprecated. Assuming 'px'.&#xA;&#xA;(wingpanel:2526): Gtk-WARNING **: Theme parsing error: gtk.css:1:71: Not using units is deprecated. Assuming 'px'.&#xA;[INFO 19:09:15.441220] Application.vala:155: Sistem Paneli version: 2.0.1&#xA;[INFO 19:09:15.441255] Application.vala:157: Kernel version: 4.4.0-47-generic&#xA;[FATAL 19:09:15.496907] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 19:09:15.497230] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[16:09:15.574393 GLib-GIO-Critical] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[16:09:15.574414 GLib-GIO-Critical] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[16:09:15.574417 GLib-GIO-Critical] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[16:09:15.574420 GLib-GIO-Critical] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[16:09:15.574424 Critical] gee_abstract_collection_get_size: assertion 'self != NULL' failed&#xA;[16:09:15.574430 Warning] Theme.vala:508: Currently selected gtk+ theme 'elementary' does not provide a dock theme, fallback to the built-in defaults!&#xA;[16:09:15.847607 GLib-Critical] g_hash_table_get_keys: assertion 'hash_table != NULL' failed&#xA;[16:09:15.862371 GLib-GIO-Critical] g_app_info_get_name: assertion 'G_IS_APP_INFO (appinfo)' failed&#xA;[16:09:15.862801 GLib-GIO-Critical] g_app_info_get_id: assertion 'G_IS_APP_INFO (appinfo)' failed&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've searched everywhere, tried everything I found, but useless. And I don't know how to fallback to the built-in defaults.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope someone can help me.&lt;br&gt;&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7363" LastEditorUserId="575" LastEditDate="2016-11-22T11:55:59.213" LastActivityDate="2021-05-10T13:11:24.417" Title="Wingpanel Suddenly Disappeared" Tags="|wingpanel|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9253" PostTypeId="1" AcceptedAnswerId="9272" CreationDate="2016-11-14T18:55:02.047" Score="2" ViewCount="359" Body="&lt;p&gt;Does Photos on elementary OS store photos in regular file structure or one giant file like iPhoto? I want to make sure I can declare a folder within Dropbox so my photos are always synced up and backed up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secondary, is there a good one click import tool to bring my photos over from iphoto?&lt;/p&gt;&#xA;" OwnerUserId="7386" LastActivityDate="2016-11-16T00:35:24.073" Title="File Storage in Photos on elementary OS" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9254" PostTypeId="2" ParentId="9251" CreationDate="2016-11-14T20:34:02.900" Score="0" Body="&lt;p&gt;Anyone having this issue, I solved the problem with resetting of desktop configurations to do defaults as it said in the warning. To do so, run the following in the terminal;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd $HOME&#xA;cd .config&#xA;rm -R *&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then to reboot your system to changes take effect, simply run this;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will solve the problem and the wingpanel will come back. Thank you everyone!&lt;/p&gt;&#xA;" OwnerUserId="7363" LastEditorUserId="7363" LastEditDate="2017-07-15T19:15:38.107" LastActivityDate="2017-07-15T19:15:38.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9255" PostTypeId="1" AcceptedAnswerId="9261" CreationDate="2016-11-14T20:43:00.933" Score="1" ViewCount="1738" Body="&lt;p&gt;I started using Loki 0.4 and wanted to install my Epson XP-415 All-in-one printer. It got recognized and the OS wanted to install the driver but a message appeared: &quot;Missing printer driver, no printer driver for EPSON XP-412-413-415&quot;. I couldn't find a driver on Epson's page for Deb based linux for manual install. What should I do t get it running under Elementary (love the OS by the way!). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greets, Joris &#xA;(The Netherlands)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Thank you, this is the website you mean for Epson, hadn't found it before:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I tried your answer below but there are missing dependencies:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;~/Downloads$ sudo dpkg --install epson-inkjet-printer-201301w_1.0.0-1lsb3.2_amd64.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Reading database ... 246591 files and directories currently installed.)&#xA;Preparing to unpack epson-inkjet-printer-201301w_1.0.0-1lsb3.2_amd64.deb ...&#xA;Unpacking epson-inkjet-printer-201301w (1.0.0-1lsb3.2) over (1.0.0-1lsb3.2) ...&#xA;dpkg: dependency problems prevent configuration of epson-inkjet-printer-201301w:&#xA; epson-inkjet-printer-201301w depends on lsb (&gt;= 3.2); however:&#xA;  Package lsb is not installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dpkg: error processing package epson-inkjet-printer-201301w (--install):&#xA; dependency problems - leaving unconfigured&#xA;Processing triggers for libc-bin (2.23-0ubuntu4) ...&#xA;Errors were encountered while processing:&#xA; epson-inkjet-printer-201301w&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Then just&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;apt-get -f install&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which takes a while... &lt;em&gt;ran first command again&lt;/em&gt;, turned on printer, waited for OS to install, did a testprint and&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;YES! It printed perfectly.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="7388" LastEditorUserId="7388" LastEditDate="2016-11-18T16:49:41.977" LastActivityDate="2018-08-04T06:05:59.727" Title="Missing Epson printer driver" Tags="|printer|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9256" PostTypeId="2" ParentId="8145" CreationDate="2016-11-14T21:14:42.883" Score="1" Body="&lt;p&gt;They are linked indeed: the package &lt;code&gt;elementary-tweaks&lt;/code&gt; depends on &lt;code&gt;plank&lt;/code&gt;, so cannot remove the latter without the former. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the fact that plank is installed do not force you to use it, just delete your dock and use docky if you prefer it.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-14T21:14:42.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9257" PostTypeId="2" ParentId="8146" CreationDate="2016-11-14T21:18:33.450" Score="1" Body="&lt;p&gt;There must be some configuration issues, as there is a &lt;code&gt;.bashrc&lt;/code&gt; and a &lt;code&gt;.profile&lt;/code&gt; file in a default user home directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can check the default settings files in &lt;code&gt;/etc/skel&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you might want to create a new test user to play around with settings, hack together a &lt;code&gt;.bashrc&lt;/code&gt; and a &lt;code&gt;.profile&lt;/code&gt; files and copy them to your user home once it works as you want it to work.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-14T21:18:33.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9258" PostTypeId="2" ParentId="8147" CreationDate="2016-11-14T21:27:33.497" Score="1" Body="&lt;p&gt;Hopefully you have a backup of your &lt;code&gt;/etc/fstab&lt;/code&gt; files. Anyway, you should have at least one line in your &lt;code&gt;/etc/fstab&lt;/code&gt; for your root file system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# / was on /dev/sda1 during installation&#xA;UUID=239cd0e6-1516-47c0-945b-a2fc81b6f0499 /               ext4    errors=remount-ro 0       1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you do not know the UUID you can put the partition as well&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1 /               ext4    errors=remount-ro 0       1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And you might want to swap or other partitions as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# swap was on /dev/sda2 during installation&#xA;UUID=fe12633c-3f88-21f0-9b26-29fff9eef210b none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-14T21:27:33.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9259" PostTypeId="2" ParentId="8045" CreationDate="2016-11-14T21:36:20.717" Score="1" Body="&lt;p&gt;This is not possible as long as the windows are not closed but only minimized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a workaround, you can put these windows you do not want to see among the other to another workspace so they do not show up in the overview on your primary workspace…&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-14T21:36:20.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9260" PostTypeId="2" ParentId="8718" CreationDate="2016-11-14T21:46:08.967" Score="1" Body="&lt;p&gt;You should try to re-assign &lt;code&gt;Foxit Reader&lt;/code&gt; to &lt;code&gt;pdf&lt;/code&gt; files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to do so you can select a pdf file in &lt;em&gt;Files,&lt;/em&gt; right mouse click on it to open the &lt;code&gt;Properties&lt;/code&gt; dialog and select &lt;code&gt;Foxit Reader&lt;/code&gt; in the &lt;em&gt;Open with&lt;/em&gt; drop down menu at the bottom of the dialog.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-14T21:46:08.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9261" PostTypeId="2" ParentId="9255" CreationDate="2016-11-14T21:51:45.783" Score="1" Body="&lt;p&gt;You can check at &lt;a href=&quot;http://www.openprinting.org/printer/Epson/Epson-XP-412_413_415_Series&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.openprinting.org/printer/Epson/Epson-XP-412_413_415_Series&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should install the &lt;strong&gt;amd64 deb&lt;/strong&gt; package from this site, download it and use the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~/Downloads$ sudo dpkg --install epson-inkjet-printer-201301w_1.0.0-1lsb3.2_amd64.deb &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this you might have to install missing depenencies as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~/sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-11-17T17:55:03.840" LastActivityDate="2016-11-17T17:55:03.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9262" PostTypeId="1" AcceptedAnswerId="9265" CreationDate="2016-11-15T07:42:54.870" Score="1" ViewCount="2266" Body="&lt;p&gt;i want to install wine (&lt;a href=&quot;https://www.winehq.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.winehq.org/&lt;/a&gt;) and from what i have seen elementary is a debian based distro, but when i try to install using the &lt;code&gt;deb&lt;/code&gt; command it says it can't find it. What can i do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in regards, Davin&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2019-10-11T12:41:34.340" Title="Problems installing winehq" Tags="|release-loki|wine|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9264" PostTypeId="2" ParentId="8900" CreationDate="2016-11-15T11:44:25.157" Score="2" Body="&lt;p&gt;Under elementary OS 0.4 Loki you can simply install &lt;code&gt;gcalcli&lt;/code&gt; with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gcalcli&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-15T11:44:25.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9265" PostTypeId="2" ParentId="9262" CreationDate="2016-11-15T11:46:41.767" Score="2" Body="&lt;p&gt;In elementary OS you can install wine either via the &lt;em&gt;AppCenter&lt;/em&gt; (search for &lt;code&gt;wine&lt;/code&gt; and click &lt;em&gt;Install&lt;/em&gt;) or via the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-15T11:46:41.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9266" PostTypeId="2" ParentId="7018" CreationDate="2016-11-15T16:24:56.310" Score="3" Body="&lt;p&gt;To fix Firefox tearing, try opening about:config, setting &lt;code&gt;gfx.xrender.enabled&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;, then restart Firefox.&lt;/p&gt;&#xA;" OwnerUserId="7394" LastEditorUserId="84" LastEditDate="2016-11-22T19:41:09.387" LastActivityDate="2016-11-22T19:41:09.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9268" PostTypeId="2" ParentId="9226" CreationDate="2016-11-15T19:06:51.897" Score="0" Body="&lt;p&gt;With Files running (and open and focussed) hitting Ctrl+N will open a Files new window.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-11-15T19:06:51.897" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9269" PostTypeId="1" AcceptedAnswerId="9300" CreationDate="2016-11-15T21:39:41.987" Score="2" ViewCount="359" Body="&lt;p&gt;I have installed the latest available version of the Haskell platform on Elementary with &lt;code&gt;apt-get&lt;/code&gt;&#xA;But the actual version is pretty old:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; sudo apt-get install haskell-platform&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;haskell-platform is already the newest version (2014.2.0.0.debian2).&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can i install the newest version? &lt;a href=&quot;https://www.haskell.org/platform/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.haskell.org/platform/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7397" LastActivityDate="2020-01-02T02:01:50.760" Title="Haskell Platform last version" Tags="|apt|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9270" PostTypeId="2" ParentId="5595" CreationDate="2016-11-15T21:47:32.890" Score="5" Body="&lt;p&gt;Use AppCentre to install the &quot;Disks&quot; application, it will do the job and is useful for other things too. Start it, carefully select the USB drive from the list on the left, then use the menu top right to select &quot;Restore Disk Image&quot; and choose your iso file. It works fine on Ubuntu MATE, but I haven't tried it on ElementaryOS.&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2016-11-16T08:45:58.233" LastActivityDate="2016-11-16T08:45:58.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9271" PostTypeId="1" CreationDate="2016-11-15T21:50:25.547" Score="1" ViewCount="43" Body="&lt;p&gt;So I downloaded the following wallpaper and put it in my pictures folder. I go into settings and click on the thumbnail. My desktop changes to a black background and that is it. Any idea what is wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://cdn.wallpapersafari.com/49/38/SQEcnG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://cdn.wallpapersafari.com/49/38/SQEcnG.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2017-02-14T13:26:40.123" Title="Wallpaper bigger that screen breaks wallpaper" Tags="|wallpaper|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9272" PostTypeId="2" ParentId="9253" CreationDate="2016-11-16T00:35:24.073" Score="1" Body="&lt;p&gt;It does not have a database file that it puts them in. If you import a picture it will create dated folders [2016-10-10] or you can drag the photo in to the pictures folder directly and it will load&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-16T00:35:24.073" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9273" PostTypeId="1" CreationDate="2016-11-16T02:49:40.153" Score="1" ViewCount="315" Body="&lt;p&gt;I am trying to figure what could be wrong with pantheon, but for some reason it does not like tmux. Below on the left is what I am getting and on the right is what it should look like. I started tmux with &lt;code&gt;tmux -2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ku3S5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ku3S5.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have downloaded another terminal &lt;code&gt;terminator&lt;/code&gt; and it looks just fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oqQRF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oqQRF.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/jrock2004/dotfiles&quot; rel=&quot;nofollow noreferrer&quot;&gt;My dotfiles can be found here.&lt;/a&gt; Thanks for any help&lt;/p&gt;&#xA;" OwnerUserId="7396" LastEditorUserId="7396" LastEditDate="2016-12-27T18:56:40.663" LastActivityDate="2016-12-27T18:56:40.663" Title="Vim looks different in tmux" Tags="|pantheon-terminal|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9274" PostTypeId="1" CreationDate="2016-11-16T03:46:10.457" Score="0" ViewCount="1097" Body="&lt;p&gt;I have only just got elementary Loki and am brand new to linux. When Installed elementary onto my ASUS TP500L laptop the wifi didn't work. I saw another question for the same wifi driver&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4327/problem-with-mediatek-mt7630e-and-kernel-4-4&quot;&gt;Problem with mediatek MT7630E and kernel 4.4 1&lt;/a&gt;. I tried to follow it's steps but I couldn't get it to work.&lt;/p&gt;&#xA;" OwnerUserId="7399" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2020-06-05T20:32:22.883" Title="how do I install Mediatek MT7630E Wifi driver for elementary loki" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9276" PostTypeId="2" ParentId="2583" CreationDate="2016-11-16T04:24:17.253" Score="1" Body="&lt;p&gt;You can achieve this using xdotool. xdotool lets you simulate keyboard input and mouse activity, move and resize windows, etc.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Step 1: Install xdotool.&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xdotool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step 2: Move your mouse over the synapse icon and get mouse location&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool getmouselocation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should get output like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;x:1117 y:24 screen:0 window:39845936&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step 3: Add keyboard shortcut for indicator&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;code&gt;System Settings -&amp;gt; Keyboard -&amp;gt; Shortcuts -&amp;gt; Custom Shortcuts.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the + and enter the below command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool mousemove x y click 1 mousemove restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace x and y with the values you got. Set the shortcut as &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; Logout and Login again.&lt;/p&gt;&#xA;" OwnerUserId="2776" LastActivityDate="2016-11-16T04:24:17.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9277" PostTypeId="2" ParentId="7742" CreationDate="2016-11-16T05:11:13.893" Score="24" Body="&lt;p&gt;I had this same issue and found out it was actually due to a conflicting keyboard shortcut with Alt+Shift which changes keyboard layout. Going to Settings &gt; Keyboard &gt; Layout and changing the Switch Layout binding to Alt+Caps Lock made Alt + Shift + Tab behavior consistent again.&lt;/p&gt;&#xA;" OwnerUserId="7403" LastActivityDate="2016-11-16T05:11:13.893" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9280" PostTypeId="1" AcceptedAnswerId="9926" CreationDate="2016-11-16T09:48:59.133" Score="1" ViewCount="263" Body="&lt;p&gt;I have recently installed Xamp package and tried &lt;code&gt;./manager-linux-x64.run&lt;/code&gt; in &lt;code&gt;/opt/lampp folder&lt;/code&gt;. After clicking start all button &lt;strong&gt;MySQL, ProFTPD&lt;/strong&gt; shows running status but apache web service displays stop status. I have tried port &lt;em&gt;80,8080,9000,8079,2222&lt;/em&gt; ... but all in vain. On port 80 firefox shows up after typing command&#xA;&lt;code&gt;lsof -i @0.0.0.0:80&lt;/code&gt;. I have closed the browser and tried again but can't find struggle fruitful. Please suggest some solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="7405" LastActivityDate="2016-12-29T14:59:19.507" Title="Apache web server not running" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9281" PostTypeId="1" CreationDate="2016-11-16T12:24:27.340" Score="0" ViewCount="1191" Body="&lt;p&gt;I want to make it so when it press the windows key on my keyboard the applications menu pops up. How do i do this?&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastEditorDisplayName="user7151" LastEditDate="2016-11-22T08:32:52.607" LastActivityDate="2017-01-31T20:12:06.387" Title="Setting hotkey for application menu" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ClosedDate="2017-02-01T16:47:05.013" ContentLicense="CC BY-SA 3.0" />
  <row Id="9282" PostTypeId="1" AcceptedAnswerId="9292" CreationDate="2016-11-16T13:44:02.600" Score="2" ViewCount="1959" Body="&lt;p&gt;First, sorry for my English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Acer-E5 574G laptop installed Elementary OS 0.4 Loki.&#xA;Sometime my touch pad will suddenly stopped working and I have to reboot my laptop to get it works again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The touch pad is fine on Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop specs:&#xA;CPU: Intel i7 6500U&#xA;RAM: 8GB DDR3L&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Touch pad driver:&#xA;Libinput&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS version:&#xA;0.4 Loki stable (up-to-date), using proprietary drivers for all components&lt;/p&gt;&#xA;" OwnerUserId="7404" LastActivityDate="2016-11-17T06:22:41.923" Title="&quot;Touch Pad&quot; randomly stop working" Tags="|release-loki|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9283" PostTypeId="1" CreationDate="2016-11-16T14:27:17.773" Score="6" ViewCount="2548" Body="&lt;p&gt;I am totally convinced leaving Windows behind definitely for serious audio production! I am looking around which Linux distro &amp;amp; repo's suits best for this task but can't figure it out at all!!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I run a (bought in 2014)Lenovo Thinkpad Essential e545 Windows 8.1 laptop with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Amd apu a10-5750m 2.5 Ghz &amp;amp; radeon 8650h graphics&#xA;8gb ram &#xA;3 x usb 3, 1 x hdmi, gigabit lan, wlan card, bluetooth&#xA;conexant on-board soundcard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I install and efficient configure Element for mostly audio production and audio editing with lots of plugins, audio samples and an external usb controller keyboard?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much!!!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yves Guffens&lt;/p&gt;&#xA;" OwnerUserId="7407" LastActivityDate="2020-06-18T17:57:55.867" Title="elementary for audio production?" Tags="|audio|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9284" PostTypeId="2" ParentId="9283" CreationDate="2016-11-16T14:46:33.163" Score="5" Body="&lt;p&gt;There are several great music apps that work well on Linux:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://lmms.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;LMMS&lt;/a&gt;: Linux's answer to FL studio. Free in the AppCenter. The UI is pretty tiny on my FHD XPS 13, but would be totally fine on lower-DPI screens. A new UI is &lt;a href=&quot;https://github.com/LMMS/lmms/issues/2806&quot; rel=&quot;nofollow noreferrer&quot;&gt;in the works&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.bitwig.com/en/home.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bitwig Studio&lt;/a&gt;: Commercial Digital Audio Worstation (DAW) that works on Linux.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://ardour.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ardour&lt;/a&gt;: Free DAW that's supposed to be comparable to Pro Tools.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.renoise.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Renoise&lt;/a&gt;: Old-school tracker meets new-school functionality (plugins, effects, ReWire support, MIDI, etc.). Commercial software, but isn't too expensive. The UI is small on hi-DPI screens, but looks great on other screens.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://harrisonconsoles.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Mixbus&lt;/a&gt; is based off of Ardour, but pre-allocated DSP for some built-in analog modeling of EQ, summing and tape saturation, etc, as well as having an intuitive analog-style workflow. Like Reaper it is also very affordable. The installation process also helps optimize your OS.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;All of these apps support samples, plugins, and MIDI keyboards.&lt;/p&gt;&#xA;&lt;p&gt;I personally really like &lt;a href=&quot;http://milkytracker.titandemo.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MilkyTracker&lt;/a&gt; (free in the AppCenter). It takes a little time to learn, but there are lots of great tutorials available, and it's pretty straightforward once you get the hang of it. It's great for making chiptune and dance music. No plugins to speak of, but the sampler is super-flexible.&lt;/p&gt;&#xA;&lt;p&gt;See also &lt;a href=&quot;http://blog.elementary.io/post/152713702736/switching-from-macos-creative-work&quot; rel=&quot;nofollow noreferrer&quot;&gt;Switching from macOS: Creative Work&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="23095" LastEditDate="2020-06-18T13:41:25.207" LastActivityDate="2020-06-18T13:41:25.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9285" PostTypeId="1" CreationDate="2016-11-16T15:22:19.607" Score="1" ViewCount="389" Body="&lt;p&gt;I installed elementary on my new PC and the. To make everything work I followed this &lt;a href=&quot;http://forum.notebookreview.com/threads/asus-ux510uw-n-ubuntu-16-04-review-setup.796871/&quot; rel=&quot;nofollow noreferrer&quot;&gt;tuto&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For my hotkeys I modified &lt;code&gt;/etc/default/grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash acpi_osi=&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after I created the file &lt;code&gt;20-intel.conf&lt;/code&gt; in &lt;code&gt;/usr/share/X11/xorg.conf.d/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# begin file contents&#xA;Section &quot;Device&quot;&#xA;Identifier &quot;card0&quot;&#xA;Driver &quot;intel&quot;&#xA;Option &quot;Backlight&quot; &quot;intel_backlight&quot;&#xA;BusID &quot;PCI:0:2:0&quot;&#xA;EndSection&#xA;# end file contents&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now when I use my hotkeys to adjust the brightness, the indicator changes but not the brightness.&lt;/p&gt;&#xA;" OwnerUserId="6260" LastEditorDisplayName="user7151" LastEditDate="2016-11-17T12:11:19.807" LastActivityDate="2016-11-30T12:11:48.377" Title="Backlight asus zenbook ux510uw" Tags="|brightness|asus|backlight|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9288" PostTypeId="1" CreationDate="2016-11-16T18:10:55.877" Score="2" ViewCount="298" Body="&lt;p&gt;I have a Dell Vostro 5470 notebook. It has three speakers. Two normal and one subwoofer. The subwoofer is not working under elementary os or ubuntu. Windows uses the MaxxAudio 4. Can you help me to fix this problem, please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Kind regards,&#xA;Tamas Racz&lt;/p&gt;&#xA;" OwnerUserId="7408" LastActivityDate="2023-04-06T06:06:30.950" Title="Dell Vostro 5470 Low audio" Tags="|software-recommendation|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9289" PostTypeId="1" CreationDate="2016-11-16T19:44:29.137" Score="1" ViewCount="513" Body="&lt;p&gt;I already tried as described here:&#xA;&lt;a href=&quot;https://elementary.io/de/docs/code/getting-started#building-and-installing-with-cmake&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/de/docs/code/getting-started#building-and-installing-with-cmake&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it simply does not show up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use this hello world example &lt;a href=&quot;https://stackoverflow.com/questions/31606264/simple-appindicator-with-vala-application-under-elementary-os&quot;&gt;https://stackoverflow.com/questions/31606264/simple-appindicator-with-vala-application-under-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which leads to the following errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;app-indicator:13536): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(app-indicator:13536): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(app-indicator:13536): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(app-indicator:13536): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(app-indicator:13536): GLib-GObject-WARNING **: cannot register existing type 'GdkWindow'&#xA;&#xA;(app-indicator:13536): GLib-GObject-CRITICAL **: g_param_spec_object: assertion 'g_type_is_a (object_type, G_TYPE_OBJECT)' failed&#xA;&#xA;(app-indicator:13536): GLib-GObject-CRITICAL **: g_object_class_install_property: assertion 'G_IS_PARAM_SPEC (pspec)' failed&#xA;&#xA;(app-indicator:13536): GLib-GObject-WARNING **: cannot register existing type 'GdkScreen'&#xA;&#xA;(app-indicator:13536): GLib-CRITICAL **: g_once_init_leave: assertion 'result != 0' failed&#xA;&#xA;(app-indicator:13536): Gdk-CRITICAL **: IA__gdk_screen_get_default_colormap: assertion 'GDK_IS_SCREEN (screen)' failed&#xA;&#xA;(app-indicator:13536): Gdk-CRITICAL **: IA__gdk_colormap_get_visual: assertion 'GDK_IS_COLORMAP (colormap)' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I compile with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; valac --pkg appindicator-0.1 --pkg gtk+-3.0 app-indicator.vala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7110" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2023-03-23T16:56:03.687" Title="How to build an indicator from source?" Tags="|wingpanel|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9290" PostTypeId="1" CreationDate="2016-11-16T19:59:58.397" Score="2" ViewCount="863" Body="&lt;p&gt;How can I add my signature to mail?&#xA;I can't find any resource to add my signature under my emails messages.&lt;/p&gt;&#xA;" OwnerUserId="7410" LastActivityDate="2017-05-01T13:22:38.837" Title="can I add a signature to mail in Elementary OS?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9291" PostTypeId="1" CreationDate="2016-11-16T22:58:52.380" Score="1" ViewCount="53" Body="&lt;p&gt;I have probably not removed a usb stick properly and as a consequence I have an icon on Files which does not disappear. Have run umount (now it shows as an empty folder), deleted the folder from the /media folder and it still shows in Files (if I click it will still show as empty folder). How can I remove it? Many thanks&lt;/p&gt;&#xA;" OwnerUserId="4215" LastEditorUserId="4215" LastEditDate="2016-11-16T23:08:47.437" LastActivityDate="2016-11-16T23:08:47.437" Title="Icon on Files -&gt; Devices does not disappear" Tags="|pantheon-files|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9292" PostTypeId="2" ParentId="9282" CreationDate="2016-11-16T23:35:07.617" Score="1" Body="&lt;p&gt;Edit /etc/default/grub, and change the line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet nosplash&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;i8042.nomux i8042.reset quiet nosplash&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then from terminal execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should fix touchpad problems :-)&lt;/p&gt;&#xA;" OwnerUserId="6960" LastActivityDate="2016-11-16T23:35:07.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9293" PostTypeId="1" AcceptedAnswerId="9306" CreationDate="2016-11-16T23:54:47.550" Score="3" ViewCount="4293" Body="&lt;p&gt;In Elementary OS 0.4 Loki, the default behavior is to disable the touchpad while typing. However, this is undesired, especially while playing games. I want to be able to type and use the touchpad at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the Settings app, and found nothing to disable this undesired functionality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I &lt;em&gt;enable&lt;/em&gt; the touchpad while typing?&lt;/p&gt;&#xA;" OwnerUserId="7412" LastActivityDate="2016-11-17T21:17:34.790" Title="How to NOT disable touchpad while typing?" Tags="|keyboard|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9294" PostTypeId="1" CreationDate="2016-11-17T00:09:19.613" Score="1" ViewCount="468" Body="&lt;p&gt;I'm a bit of a Linux noob, so forgive the basic questions. I've run Ububtu-Mate on a laptop for months and enjoyed it. I recently installed Elementary OS on a different machine and like it, so I installed it to a live USB flash drive to test out on the same laptop and am having troubles. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Live USB boots up and gets to the main screen with the background pine tree image and the dock showing at the bottom of the screen.  No panel at the top of the screen, and if you mouse over the dock at the bottom, it flashes and disappears. Then I am stuck.  Special+T doesn't bring up a terminal. Alt-Ctrl-1 gets me to a terminal login, but I can't find the live user password anywhere on the elementary site. &#xA;I'm totally stuck on how to troubleshoot this.  Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="7413" LastActivityDate="2016-11-17T21:14:30.853" Title="Live USB install problem" Tags="|release-loki|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9295" PostTypeId="2" ParentId="9282" CreationDate="2016-11-17T06:22:41.923" Score="0" Body="&lt;p&gt;One other option would be: Try to disabled libinput &#xA;(as it has a lot of people have repeatedly report problems with the version that is shipped with Ubuntu and eOS) and fallback to synaptic driver:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7545/trackpad-randomly-freezes/7562&quot;&gt;Trackpad randomly freezes&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The proper way to do it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-synaptics&#xA;&#xA;sudo mkdir /etc/X11/xorg.conf.d&#xA;sudo cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /etc/X11/xorg.conf.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5638" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-17T06:22:41.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9297" PostTypeId="2" ParentId="9290" CreationDate="2016-11-17T09:48:26.410" Score="3" Body="&lt;p&gt;You can select &lt;em&gt;Accounts/Edit account&lt;/em&gt; (crayon icon) at the bottom of the dialog. There is a checkbox to set a signature and a textbox to type your signature in:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gt915.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gt915.png&quot; alt=&quot;how to set signature&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-17T09:48:26.410" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9298" PostTypeId="1" CreationDate="2016-11-17T09:51:25.700" Score="1" ViewCount="546" Body="&lt;p&gt;I turned on my Elementary OS Panetheon desktop yesterday evening to discover various icons were missing, 'Photos', &quot;Videos&quot;. Also the System settings icon has changed to what looks like some little boxes. Some of the mini icons in the system tray are also broken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried uninstalling &amp;amp; reinstalling 'Photos' but the issue remained, actually in the App centre the icon is also missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have an idea how I can restore my icons?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E&lt;/p&gt;&#xA;" OwnerUserId="7419" LastActivityDate="2016-11-17T09:51:25.700" Title="Various icons now missing" Tags="|system|icons|photos|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9300" PostTypeId="2" ParentId="9269" CreationDate="2016-11-17T10:45:40.650" Score="1" Body="&lt;p&gt;There is a PPA for GHC and Cabal, you should check if it is what you need:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~hvr/+archive/ubuntu/ghc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~hvr/+archive/ubuntu/ghc&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add this to your system with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hvr/ghc&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or you can install the generic Linux version if you need to use a more recent version of the full Haskell Platform. However this does not take advantage of the elementary OS package system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.haskell.org/platform/linux.html#linux-generic&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.haskell.org/platform/linux.html#linux-generic&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-17T10:45:40.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9301" PostTypeId="2" ParentId="4659" CreationDate="2016-11-17T11:31:03.943" Score="1" Body="&lt;p&gt;Edited: I am pretty sure that you have it sorted out now. However, just in case...FYI My issue was sorted out with some help from @Jorge R Marin as you can see in the following link.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9302/tlp-power-management-disables-usb-devices-in-my-asus-ux305-ultrabook-needs-rest/9313?noredirect=1#comment12358_9313&quot;&gt;TLP Power Management disables USB devices in my ASUS UX305 ultrabook. Needs restart!&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before Edit:Has your problem been solved. I am facing the same issue! This is in addition to printing and screen issues (Running Loki on Asus UX305 (Dual Boot option). Out of the box, the notebook came with windows 10 home). But this one seems to be a deal breaker. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To detect the device, I have to do either of the folowing: a) suspend the system and wake it up (b) turn off the computer and restart. This issue is observed whether I use the USB-3 or USB-2 ports. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would appreciate if you let me know how you solved this problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;output of sudo lsusb Before And After device insertion:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 003: ID 8087:0a2a Intel Corp. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 002: ID 04f2:b56b Chicony Electronics Co., Ltd &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Prathap&lt;/p&gt;&#xA;" OwnerUserId="7417" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-20T06:46:15.973" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9302" PostTypeId="1" AcceptedAnswerId="9313" CreationDate="2016-11-17T11:41:30.570" Score="2" ViewCount="4549" Body="&lt;p&gt;I recently had Elementary OS (Loki) installed in my Asus UX305 (Dual Boot option). Out of the box, the notebook came with windows 10 home. I took some body's help in the installation as it was not straight forward for me. Iam new to Linux. Post installation, it has been a mixed experience. The positives noted in many reviews are definitely there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I plug in a USB device, it is not recognized. Neither the 'Files' side bar nor 'Disks' show the device being connected. 'sudo fdisk -l' command too does not reveal the USB device. To detect the device, I have to do either of the folowing: a) suspend the system and wake it up (b) turn off the computer and restart. This issue is observed whether I use the USB-3 or USB-2 ports. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;output of sudo lsusb Before And After device insertion (when device is not seen):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 003: ID 8087:0a2a Intel Corp. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 002: ID 04f2:b56b Chicony Electronics Co., Ltd &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has any one of you faced this issue? Please help...I am even thinking of shifting to Ubuntu from this beautiful OS!!&lt;/p&gt;&#xA;" OwnerUserId="7417" LastEditorUserId="6398" LastEditDate="2016-11-20T06:32:49.513" LastActivityDate="2016-11-23T19:09:58.320" Title="TLP Power Management disables USB devices in my ASUS UX305 ultrabook. Needs restart!" Tags="|release-loki|power|usb|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9304" PostTypeId="2" ParentId="8861" CreationDate="2016-11-17T15:01:19.360" Score="1" Body="&lt;p&gt;Have you tried changing cursor-theme to elementary? That worked for me when I had the same issue.&lt;/p&gt;&#xA;" OwnerUserId="7420" LastActivityDate="2016-11-17T15:01:19.360" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9305" PostTypeId="1" CreationDate="2016-11-17T16:36:13.053" Score="1" ViewCount="284" Body="&lt;p&gt;I'm trying to import a calendar from my google agenda, so I enabled not secure application (&lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.google.com/settings/security/lesssecureapps&lt;/a&gt;) to use my google account, but the password seems to be always wrong for maya (but it's not of course !).&#xA;Then I have downloaded a ICS file from another web site and opened with calendar but nothing appends, nothing is imported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I dont realy know why ... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;also tryied &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/860/how-can-i-add-multiple-google-calendars-to-the-calendar/862#862&quot;&gt;How can I add multiple google calendars to the calendar?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help !&lt;/p&gt;&#xA;" OwnerUserId="7285" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-17T21:14:59.847" Title="Maya basic usage" Tags="|release-loki|calendar|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9306" PostTypeId="2" ParentId="9293" CreationDate="2016-11-17T18:15:51.837" Score="4" Body="&lt;p&gt;&lt;strong&gt;TLDR&lt;/strong&gt;&#xA;You can enable touchpad (that is disable auto-disable) with &lt;code&gt;xinput set-prop DEVICE PROP 0&lt;/code&gt; where you can check for your device ID and prop ID with &lt;code&gt;xinput&lt;/code&gt; and &lt;code&gt;xinput get-props DEVICE&lt;/code&gt; respectively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Let's explain this a little bit:&lt;/em&gt;&#xA;there is a new interface to do this in elementary OS 0.4 Loki &lt;code&gt;xinput&lt;/code&gt;. In a terminal window you should look for your touchpad device:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~$  xinput&#xA;⎡ Virtual core pointer                          id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  &#xA;⎜   ↳ SynPS/2 Synaptics TouchPad                id=14   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                         id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;⋮&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In my case the device id is &lt;code&gt;14&lt;/code&gt;, so now you can get its properties&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~$ xinput list-props 14&#xA;Device 'SynPS/2 Synaptics TouchPad':&#xA;    Device Enabled (154):   1&#xA;⋮&#xA;    libinput Disable While Typing Enabled (314):    1&#xA;    libinput Disable While Typing Enabled Default (315):    1&#xA;⋮&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The prop ID is &lt;code&gt;314&lt;/code&gt; (and it is set to &lt;code&gt;1&lt;/code&gt; that is, auto-disable is turned on) so now we can set disable this feature:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine:~$ xinput set-prop 14 314 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-11-17T21:17:34.790" LastActivityDate="2016-11-17T21:17:34.790" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9307" PostTypeId="2" ParentId="9293" CreationDate="2016-11-17T18:38:57.870" Score="2" Body="&lt;p&gt;If you have a Synaptic Touchpad with synclient installed you can use :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient TouchpadOff=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;0 = enabled&#xA;1 = disabled&#xA;2 = disabled while typing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source : &lt;a href=&quot;https://doc.ubuntu-fr.org/touchpad#activerdesactiver_le_pave_tactile&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://doc.ubuntu-fr.org/touchpad#activerdesactiver_le_pave_tactile&lt;/a&gt; (french)&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-11-17T18:38:57.870" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9308" PostTypeId="2" ParentId="9305" CreationDate="2016-11-17T20:56:49.803" Score="2" Body="&lt;p&gt;You may need to &lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;enable &quot;less secure apps&quot;&lt;/a&gt; in your Google settings. For more details, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1990/gmail-geary-doesnt-meet-modern-security-standards/2031#2031&quot;&gt;this answer regarding a similar problem with Pantheon Mail&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maya and Geary do not support OAuth, which Google now requires by default. Hopefully, a future Pantheon Online Accounts release will add OAuth support. Until then, enabling &quot;less secure apps&quot; should do the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more details, see the &lt;a href=&quot;https://developers.google.com/google-apps/calendar/caldav/v2/guide#connecting_to_googles_caldav_server&quot; rel=&quot;nofollow noreferrer&quot;&gt;Google CalDAV API docs&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-17T20:56:49.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9309" PostTypeId="2" ParentId="9294" CreationDate="2016-11-17T21:14:30.853" Score="1" Body="&lt;p&gt;you don't actually need a username or a password for trying out with live usb , i did face a similar problem all i did was use a different usb and repeated the steps from scratch .  &lt;/p&gt;&#xA;" OwnerUserId="478" LastActivityDate="2016-11-17T21:14:30.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9310" PostTypeId="2" ParentId="9305" CreationDate="2016-11-17T21:14:59.847" Score="0" Body="&lt;p&gt;You may use it with 2-factor authentication enabled (if you need it for other reasons) after generating an app password for Maya.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-17T21:14:59.847" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9311" PostTypeId="2" ParentId="5595" CreationDate="2016-11-17T21:17:50.427" Score="1" Body="&lt;p&gt;Since elementary is derivative of ubuntu , start up disk creator would work just fine , or you can use unetbootin as well.&lt;/p&gt;&#xA;" OwnerUserId="478" LastEditorUserId="478" LastEditDate="2016-11-18T01:27:40.817" LastActivityDate="2016-11-18T01:27:40.817" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9312" PostTypeId="1" CreationDate="2016-11-17T22:01:05.040" Score="0" ViewCount="6338" Body="&lt;p&gt;I tried the method for &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3856/how-to-enable-desktop-icons-and-right-click-in-elementary-os-freya&quot;&gt;Freya&lt;/a&gt; but it did not work.&#xA;First of all nautilus was not installed (only the default files, which is aparently named pantheon-files).&#xA;Installing nautilus did not help and changing it for pantheon-files just gave me a files window after login that reappeared when it was closed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to enable this?&#xA;I hope Elementary developers will do this by default, it makes no sense to me from a usability point of few to have no use of that big space (and a show desktop button just to look at the desktop picture).&#xA;It would be great if it would be a simple system settings option under desktop (there is not option for it there either).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: it seems some people marked it duplicate, I don't know why and I do not see a link. As mentioned, I tried the Freya options and they do not work and also tried some things myself that didn't work. &#xA;Remarks about design decisions are not really useful, in my opinion and probably the one of others, that is a wrong decision and that is why I posted the question.&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="7389" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-06-09T13:00:37.630" Title="How to enable desktop icons and right click in Elementary OS Loki (0.4)?" Tags="|desktop|user-interface|app-shortcuts|" AnswerCount="2" CommentCount="2" ClosedDate="2016-11-22T13:34:34.123" ContentLicense="CC BY-SA 3.0" />
  <row Id="9313" PostTypeId="2" ParentId="9302" CreationDate="2016-11-18T00:39:09.457" Score="2" Body="&lt;p&gt;Check TLP Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All TLP settings are stored in the config file /etc/default/tlp&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB_AUTOSUSPEND=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Set autosuspend mode for all USB devices upon system start or a change of power source. Input devices like mice and keyboards are exluded by default (see USB_DRIVER_BLACKLIST below). Possible values:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 – enable&#xA;0 – disable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: TLP activates USB autosuspend independent of the power source, i.e. on battery and AC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB_BLACKLIST=&quot;1111:2222 3333:4444&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exclude USB device IDs from autosuspend mode. Useful for devices having difficulties in waking up from autosuspend. Use tlp-stat -u to determine IDs. Multiple IDs are separated with blanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hint: all input devices (driver &quot;usbhid&quot;) get excluded by default. It's therefore unnecessary to put them on the USB_BLACKLIST. To circumvent the default for certain devices enter the IDs into USB_WHITELIST.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: because of conflicts with udevd v221 (and higher) the parameter USB_DRIVER_BLACKLIST had to be removed with TLP version 0.8. Enter the device IDs to be excluded into USB_BLACKLIST instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB_BLACKLIST_WWAN=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exclude builtin WWAN devices from autosuspend mode:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;0 – do not exclude&#xA;1 – exclude&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: this feature is implemented by an internal blacklist currently matching cards from Qualcomm, Ericsson and Sierra. To re-enable autosuspend mode for WWAN, enter the ID into USB_WHITELIST.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB_WHITELIST=&quot;5555:6666 7777:8888&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re-enable autosuspend mode for USB device IDs already excluded by any of the lists above (whitelist always wins). Use tlp-stat -u to determine IDs. Multiple IDs are separated with blanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disables USB autosuspend mode upon system shutdown. This is intended as a workaround if suspended USB devices disturb the shutdown process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Extract from: &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-configuration.html&quot; rel=&quot;nofollow&quot;&gt;http://linrunner.de/en/tlp/docs/tlp-configuration.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: It's advisable to read the full article.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-11-18T00:59:06.867" LastActivityDate="2016-11-18T00:59:06.867" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9315" PostTypeId="1" CreationDate="2016-11-18T02:01:09.863" Score="0" ViewCount="30" Body="&lt;p&gt;What is that icon next to print? I have tried multiple keys and I cannot figure out what that icon is suppose to be&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0pVXA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0pVXA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-18T14:49:34.963" Title="Shortcut key unkown" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9316" PostTypeId="1" CreationDate="2016-11-18T02:18:54.327" Score="1" ViewCount="1928" Body="&lt;p&gt;I really like Elementary OS so I tried to install Loki on my laptop.  It is a Lenovo Y570.  Here are specs: &lt;a href=&quot;https://www.cnet.com/products/lenovo-ideapad-y570/specs/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cnet.com/products/lenovo-ideapad-y570/specs/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Video is NVIDIA GeForce GT 555M / Intel HD Graphics 3000 - 1 GB &lt;/p&gt;&#xA;&#xA;&lt;p&gt;.  First of all, I had a lot of trouble installing it.  I was getting a black screen before the login screen with the live disk but I found the nomodeset trick for nvidia cards.  Still the screen was messing up (possibly when locking) during the install process that way, but I was able to install without any issues using the straight install partition with the nomodeset option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have an OS that boots, but the login screen is funny.  My user name is there but there is no user name on what should be the guest account login.  The login screen will accept my password but once entering it the login fields disappear but nothing else happens.  There is no touchpad or keyboard response at this point, so I can't even flip to a text session and do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Freya worked fine for me.  I install it with the live image and there aren't any issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help?&lt;/p&gt;&#xA;" OwnerUserId="7425" LastActivityDate="2019-04-09T09:02:50.567" Title="Screen locking just after sign in" Tags="|release-loki|system-installation|display|system|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9317" PostTypeId="1" AcceptedAnswerId="9368" CreationDate="2016-11-18T03:29:02.040" Score="2" ViewCount="216" Body="&lt;p&gt;It gets pretty long when I'm deep in my folder structure and it sometimes covers the line in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secondly how to show git branch if the folder is git initiated?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thirdly, how to funk up a few things to make it look cool?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to set in terminal shortcut to open a new tab in the current terminal on pressing Ctrl + N?&lt;/p&gt;&#xA;" OwnerUserId="7426" LastActivityDate="2016-11-22T19:10:55.213" Title="How to customise terminal to condense my the path to show just the current folder?" Tags="|settings|pantheon-terminal|" AnswerCount="3" CommentCount="3" ClosedDate="2016-11-23T11:32:23.273" ContentLicense="CC BY-SA 3.0" />
  <row Id="9318" PostTypeId="1" AcceptedAnswerId="9334" CreationDate="2016-11-18T08:14:24.690" Score="0" ViewCount="3353" Body="&lt;p&gt;I've read a lot about Elementary OS. It seems like a potential alternative to Ubuntu and many other Linux desktop distros. It looks beautiful and works smoothly, many say so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After having checked a lot of videos and screenshots of different versions of Elementary OS, I've noticed something unclear when it comes to window title bar buttons (Close, maximize/restore down and minimize). For example on Ubuntu, the buttons are simple and they are placed on the left, same goes for OS X. I would like to know whether it is possible to have those buttons in the latest version of Elementary OS (0.4.0 &quot;Loki&quot;) work and look just at least like in Ubuntu 16.10? And what configuration options for these buttons exist in Elementary OS, if there are any themes and styles to choose between?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks odd in some screenshots where there is only &quot;x&quot; (&quot;close window&quot; I suppose) button on the left side of a window title bar and another button which looks like &quot;maximize&quot; is placed on the opposite side, all the way to the right side of the window title bar like in this screenshot: &lt;a href=&quot;http://4.bp.blogspot.com/-T0vMLRwbxsA/VcPhaVq3vZI/AAAAAAAAKOA/tN_CGHG0MIg/s1600/email.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://4.bp.blogspot.com/-T0vMLRwbxsA/VcPhaVq3vZI/AAAAAAAAKOA/tN_CGHG0MIg/s1600/email.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure, but I think that I saw more OS X like window title bar buttons in older versions of Elementary OS (some screenshots on the net) or custom themes like &lt;a href=&quot;http://gamblisfx.com/elementary-lion-1-1-theme-make-elementary-os-like-mac-os-x/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://gamblisfx.com/elementary-lion-1-1-theme-make-elementary-os-like-mac-os-x/&lt;/a&gt; . No idea where &quot;minimize&quot; button exist in the latest version of Elementary OS. Using right mouse button on the window title bar and choosing &quot;minimize&quot; every time would be totally unpractical.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And what themes can possibly restore such simple close, maximize/restore down and minimize buttons from Ubuntu or OS X in Elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: I am unable to install and test Elementary OS or any other operating system at the moment, so I decided to ask you this first. Sooner or later I am going to run it on a laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am basically looking for the right Linux distro which would be compatible with a large number of commonly used programs and also look/to make it look similar to older versions of Ubuntu before Unity and GNOME 3, something like OS X would be perfect. Elementary OS is based on Ubuntu, right? In my case wouldn't it be better to customize Ubuntu or any other well compatible Linux, Unix-like OS and make it look similar to OS X while keeping security, compatibility and functionality? Or will Elementary OS be enough?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for specific and detailed answers with explanation, any help and advice.&lt;/p&gt;&#xA;" OwnerUserId="7432" LastActivityDate="2016-11-18T20:27:32.250" Title="Window title bar buttons style" Tags="|themes|macintosh|" AnswerCount="2" CommentCount="3" ClosedDate="2016-11-23T11:36:37.380" ContentLicense="CC BY-SA 3.0" />
  <row Id="9319" PostTypeId="1" AcceptedAnswerId="9327" CreationDate="2016-11-18T08:25:24.973" Score="4" ViewCount="713" Body="&lt;p&gt;Is it possible to move from a single boot ubuntu to single boot elementary and not have to reinstall all my applications? I'm running single boot because my laptop only has a 120 GB SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running ubuntu 16.04 LTS, and want to switch to loki - but it takes ages to reinstall android studio (and other programs), as my internet isn't the best. So was wondering if there's a faster way.&lt;/p&gt;&#xA;" OwnerUserId="4842" LastActivityDate="2016-11-19T09:26:23.033" Title="Installing elementary (replacing ubuntu) without having to reinstall applications" Tags="|release-loki|system-installation|applications|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9320" PostTypeId="2" ParentId="9319" CreationDate="2016-11-18T09:32:19.087" Score="1" Body="&lt;p&gt;The answer is &lt;strong&gt;NO&lt;/strong&gt; (as elementary OS is not an update of Ubuntu)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nevertheless, It's possible to install pantheon (the elementary OS desktop) on top of Ubuntu. You will get a functioning desktop, but you have to remember that it's not the same as a full installation so you may get some small errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To  install the elementary desktop do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-desktop`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2016-11-19T09:26:23.033" LastActivityDate="2016-11-19T09:26:23.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9321" PostTypeId="2" ParentId="9318" CreationDate="2016-11-18T09:45:41.457" Score="1" Body="&lt;p&gt;On elementary OS you have a maximize and a close button. There's no need to minimize because closing an app and opening it again will also open what you were working on before. This only works with elementary apps and maybe some apps designed for elementary.&lt;br&gt;&#xA;However you can alt-tab or press another icon in the dock to go to another app. That way it won't close the previous app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you REALLY need the minimize button you could enable it with &lt;code&gt;elementary-tweaks&lt;/code&gt;. That same app also allows you to install themes, but it's not supported by the elementary team.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the compatibility, Loki is based on Ubuntu 16.04 so you will have everything that's in there but also you will get more recent versions of some packages and drivers that the elementary team have actualized.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-18T09:45:41.457" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9322" PostTypeId="1" CreationDate="2016-11-18T10:10:26.630" Score="2" ViewCount="331" Body="&lt;p&gt;I just installed Elementary OS 0.4 Loki on my PC and the install went fine, but after I restarted my mouse and keyboard did not respond when I landed at the login screen so I'm stuck. I changed over to my Windows 10 install and both the mouse and keyboard work fine there. I also tried booting into recovery mode and my keyboard didn't work there either.&lt;/p&gt;&#xA;" OwnerUserId="7433" LastActivityDate="2016-11-18T11:00:21.477" Title="New Install Keyboard and Mouse not Responding on Login" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9323" PostTypeId="2" ParentId="9322" CreationDate="2016-11-18T11:00:21.477" Score="-1" Body="&lt;p&gt;you can install elementary OS once again&lt;/p&gt;&#xA;" OwnerUserId="7435" LastActivityDate="2016-11-18T11:00:21.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9324" PostTypeId="2" ParentId="9312" CreationDate="2016-11-18T11:05:01.560" Score="-2" Body="&lt;p&gt;you do read more: &lt;a href=&quot;https://chiasefree.com/linux-tutorial/bat-desktop-icons-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;Enable desktop icons and right click on Elementary Freya OS.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7435" LastEditorUserId="-1" LastEditDate="2017-06-09T13:00:37.630" LastActivityDate="2017-06-09T13:00:37.630" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9325" PostTypeId="1" CreationDate="2016-11-18T14:45:47.637" Score="2" ViewCount="1140" Body="&lt;p&gt;I've tried to install loki on a Macbook 12&quot; 2015, but once the Install screen loads, neither trackpad or keyboard respond.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've managed to install it without problems on an external USB disk (using rEFInd) using a Macbook pro 15&quot; 2014, in order to use it on both Macs, and after that, if I try to boot it using the Macbook 12&quot;, it still doesn't work (no keyboard or trackpad, can pass login screen). However, the macbookpro works flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess it's drivers related, but I though it would be compatible. Any hint on this? I haven't found much info about it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="7439" LastActivityDate="2019-01-25T05:45:43.863" Title="Trackpad and keyboard not working on Macbook 12-inch 2015" Tags="|keyboard|touchpad|macbook|efi|" AnswerCount="1" CommentCount="3" ClosedDate="2019-02-20T01:29:32.403" ContentLicense="CC BY-SA 3.0" />
  <row Id="9326" PostTypeId="2" ParentId="9315" CreationDate="2016-11-18T14:49:34.963" Score="1" Body="&lt;p&gt;This is the &lt;strong&gt;Alt&lt;/strong&gt; key. If you check under the Keyboard &gt; Windows category&#xA;&lt;strong&gt;Alt&lt;/strong&gt; + &lt;strong&gt;F4&lt;/strong&gt; closes the current window and it has the same icon.&lt;/p&gt;&#xA;" OwnerUserId="172" LastActivityDate="2016-11-18T14:49:34.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9327" PostTypeId="2" ParentId="9319" CreationDate="2016-11-18T14:50:56.150" Score="2" Body="&lt;p&gt;You should reinstall elementary to ensure that you get a fully functional system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you can keep a list of the packages installed with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --get-selections &amp;gt; package-list-file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and backup this file and the packages in &lt;code&gt;/var/cache/apt/archives&lt;/code&gt; so that the packages not specific to elementary OS 0.4 would not be downloaded again. This will only work if you have not done any &lt;code&gt;apt-get clean&lt;/code&gt; / &lt;code&gt;apt-get autoclean&lt;/code&gt; since you have installed the packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the installation of elementary OS 0.4 you can copy every &lt;code&gt;.deb&lt;/code&gt; file from you backup medium back to &lt;code&gt;/var/cache/apt/archives&lt;/code&gt;. Do not forget to add each PPA that you have used on the original system to the new one before as well. After these steps you  restore packages with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --set-selections &amp;lt; package-list-file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There might be some packages that you have to install/fix a little but it should work for most of the software installed.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-18T14:50:56.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9328" PostTypeId="1" AcceptedAnswerId="9329" CreationDate="2016-11-18T16:18:58.587" Score="1" ViewCount="357" Body="&lt;p&gt;Looking at the keyboard shortcuts, there is a zoom in and out but when I hit the keys specified, nothing happens. Do I have to install an app for these to work?&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-18T17:12:30.773" Title="Zoom in like Mac does" Tags="|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9329" PostTypeId="2" ParentId="9328" CreationDate="2016-11-18T17:12:30.773" Score="1" Body="&lt;p&gt;Are you looking at the &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;+&lt;/kbd&gt; and &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;-&lt;/kbd&gt; keyboard shortcuts? These allow you to zoom the text size in a specific application. (On macOS, zooming in the browser, Terminal, etc. works similarly.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're looking to scale all text on the screen, there's an option to do that in System Settings --&gt; Universal Access. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're looking more for something like the &lt;a href=&quot;https://support.apple.com/kb/PH11488?locale=en_US&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;zoom content on the screen&quot;&lt;/a&gt; feature in macOS, you could try an app such as &lt;a href=&quot;https://askubuntu.com/a/534573/486628&quot;&gt;xzoom&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-11-18T17:12:30.773" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9330" PostTypeId="1" CreationDate="2016-11-18T17:27:59.113" Score="2" ViewCount="2207" Body="&lt;p&gt;Sometimes the dock and top bar do not appear. What to do?&lt;/p&gt;&#xA;" OwnerUserId="7440" LastEditorUserId="792" LastEditDate="2016-11-18T18:36:19.550" LastActivityDate="2017-04-22T05:30:14.553" Title="Sometimes the dock and top bar do not appear on elementary Loki. What to do?" Tags="|release-loki|boot|desktop|" AnswerCount="5" CommentCount="0" ClosedDate="2018-03-11T02:00:32.403" ContentLicense="CC BY-SA 3.0" />
  <row Id="9332" PostTypeId="1" AcceptedAnswerId="9529" CreationDate="2016-11-18T18:49:22.827" Score="0" ViewCount="181" Body="&lt;p&gt;I'm running Loki inside a VirtualBoxVM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody else having issues resizing XPad windows running on VirtualBox VM?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used to be able to resize it just fine in Luna and Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="7443" LastActivityDate="2016-12-06T07:36:36.690" Title="Trouble resizing XPad window on VirtualBox VM" Tags="|release-loki|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9333" PostTypeId="1" AcceptedAnswerId="10631" CreationDate="2016-11-18T20:21:31.507" Score="1" ViewCount="1320" Body="&lt;p&gt;For a while I've been trying to make Ctrl + Alt + Delete open Gnome System Monitor but it won't work in Loki. If I change it to ctrl + super + delete it works but that is not what I want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to solve this?&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2017-02-08T21:11:36.517" Title="Ctrl + Alt + Delete shortcut (Loki)" Tags="|release-loki|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9334" PostTypeId="2" ParentId="9318" CreationDate="2016-11-18T20:27:32.250" Score="0" Body="&lt;p&gt;Actually you can add a minimize button and place the close, minimize, maximize buttons on which side and which order you want for any of them with dconf editor (needs to be installed from AppCenter) or from Terminal, as described here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4205/how-can-i-get-a-minimize-button&quot;&gt;How can I get a &amp;quot;minimize&amp;quot; button?&lt;/a&gt;&#xA;Or you can use a hot corner to minimize the windows (System Settings &gt; Desktop &gt; Hot Corners).&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-18T20:27:32.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9335" PostTypeId="2" ParentId="9330" CreationDate="2016-11-18T21:20:06.443" Score="1" Body="&lt;p&gt;I usually just Ctrl+Alt+F2 login to command line and reboot. It then goes away.&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-18T21:20:06.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9336" PostTypeId="2" ParentId="4360" CreationDate="2016-11-18T23:24:53.460" Score="1" Body="&lt;p&gt;I was just looking at another answer (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/9277/7446&quot;&gt;https://elementaryos.stackexchange.com/a/9277/7446&lt;/a&gt; ) to a related question (about why shift-alt-tab behaviour was strange), and I think it might explain your problem too. In Elementary, go to settings -&gt; keyboard -&gt; layout, and you might find that shift-alt-tab is mapped to switch keyboard layouts. I disabled that mapping, and now alt-tab and shift-alt-tab work fine for me; I'm guessing this will also stop your keyboard layout from changing!&lt;/p&gt;&#xA;" OwnerUserId="7446" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-18T23:24:53.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9337" PostTypeId="2" ParentId="9316" CreationDate="2016-11-19T09:35:40.937" Score="1" Body="&lt;p&gt;The guest session won't show any name unless you select it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the rest, It seems that the bug is related to your graphics card. You need to install the correct driver. Go into any tty (&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F1 - F6&lt;/kbd&gt;) and log in. First, update your system:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt update &amp;amp;&amp;amp; sudo apt upgrade &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then do (just one of the following lines):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime nvidia-current nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or if you prefer the latest stable driver:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime nvidia-367 nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="160" LastEditDate="2016-12-19T19:53:24.460" LastActivityDate="2016-12-19T19:53:24.460" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="9339" PostTypeId="1" CreationDate="2016-11-19T15:42:44.203" Score="2" ViewCount="1367" Body="&lt;p&gt;I would like to change touchpad behaviour in Loki so that two-finger and three-finger taps would be swapped. Two-finger tap - middle mouse click, Three-finger tap - right mouse click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also physical button right click works in the same way as physical button left click. I would like physical button right click to work like mouse right click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to change those things in elementary?&lt;/p&gt;&#xA;" OwnerUserId="7451" LastEditorUserId="7451" LastEditDate="2016-11-20T11:20:49.093" LastActivityDate="2017-03-05T08:50:06.670" Title="Touchpad multitouch behaviour change" Tags="|settings|touchpad|" AnswerCount="1" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="9340" PostTypeId="2" ParentId="9312" CreationDate="2016-11-19T16:28:00.470" Score="1" Body="&lt;p&gt;This is a design decision. The philosophy of elementary OS is aimed just to have a clean desktop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The developers supported the clean desktop day on October 17th in twitter:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;elementary&#xA;  @elementary 17 oct.&#xA;  The Internet tells us it's #NationalCleanYourVirtualDesktopDay . We got you. elementary.io&#xA;  pic.twitter.com/Jr1vt2ME9H&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So one can't say this is the ideal distro to fulfill the expectations of users that position multiple icons at the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In any case you can always try to change this feature to adapt elementary to your working habits.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this question you have many answers that can solve your problem. One of the answers comes from Daniel Foré, founder of elementary OS:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9/why-cant-i-place-files-on-the-desktop-by-default-and-how-can-i-get-this-featur&quot;&gt;Why can&amp;#39;t I place files on the desktop by default, and how can I get this feature?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-19T19:06:00.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9341" PostTypeId="1" CreationDate="2016-11-20T06:05:38.550" Score="2" ViewCount="413" Body="&lt;p&gt;Configuration made in parental control is not saving. There is no apply button in parental control window. How to save the settings. Help will be appreciated. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="6766" LastActivityDate="2016-11-20T06:05:38.550" Title="How to use parental control" Tags="|settings|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-11T01:26:04.053" ContentLicense="CC BY-SA 3.0" />
  <row Id="9343" PostTypeId="1" CreationDate="2016-11-20T09:25:03.150" Score="8" ViewCount="364" Body="&lt;p&gt;&lt;strong&gt;Problem description:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I start my computer, network (wired) connects normally, and displays as &quot;connected&quot; icon in the indicator bar. Everything seems to be working fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, I'll open my Virtualbox, which has one &lt;em&gt;host-only&lt;/em&gt; –adapter set for guests, and new network device appears to my &quot;Network settings&quot; -tab. This also is prepended to the list of devices, making my previously first network (wired) to be listed as second. (And its name changes as well, but I don't think it has anything to do with the problem)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ueNOB.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ueNOB.png&quot; alt=&quot;Networks after starting Virtualbox&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This makes my network-indicator to display as &quot;not connected&quot; – even if my hosts connection works fine. I think it has something to do with the new &lt;em&gt;vboxnet0&lt;/em&gt; – Device, which is now displayed as first device?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CHFFs.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CHFFs.png&quot; alt=&quot;Networks, virtualbox virtual device as first&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to set the physical device to be listed first even if I initialize numerous virtualbox adapters?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like that the indicator would always display the status of my physical (host) connectivity to the internet (which it does until the start of the virtualbox) - so there's something which changes the indicator whenever a new &lt;em&gt;vboxnet&lt;/em&gt; is initialized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT1&lt;/strong&gt;: I made some configurations on autostarting my VM on boot, and noticed that whenever the VM is initialized on background, no vboxnet0 - devices appear to my hosts devices list.&lt;/p&gt;&#xA;" OwnerUserId="7459" LastEditorUserId="7459" LastEditDate="2016-11-20T19:12:15.927" LastActivityDate="2017-09-15T15:43:00.583" Title="Virtualbox host-only device changes network indicator state" Tags="|networking|virtualbox|user-interface|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9344" PostTypeId="2" ParentId="9330" CreationDate="2016-11-20T09:26:29.053" Score="0" Body="&lt;p&gt;If you have an Intel Graphics card that's a known bug and it should be solved by now. Try updating your system (open AppCentre, go to Updates and press Update All).&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-20T09:26:29.053" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9345" PostTypeId="1" CreationDate="2016-11-20T11:36:17.623" Score="2" ViewCount="337" Body="&lt;p&gt;I'm relatively new with ElementaryOS (and with Linux in general). An University advisor suggest us to try different distro for a more reproducible approach with our researches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying ElementaryOS but every software that I search and install form the default AppCenter appear to be not at the latest version. (qGis, rstudio, texstudio, biblio manager, etc are all with a version number that not coincide with the latest version on the official sites).&#xA;I read many threads and blogs online that suggest to use a different package manager (like gnome software).&#xA;Can someone &quot;route&quot; me in the right direction? Is there a chance to use directly the packages on the sites of each software? What is the most efficient way to install up to date software on the go?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. If I search Gnome software in the AppCenter, it is at old version too. There is a way to install this old version and after that force in some way the update, maybe from itself?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards, and sorry for the bad english, I'm writing on the go and this environment is a bit estranging at first. &lt;/p&gt;&#xA;" OwnerUserId="7460" LastEditorUserId="7460" LastEditDate="2016-11-20T11:58:16.910" LastActivityDate="2018-05-06T19:14:39.260" Title="Software in AppCenter aren't up to date" Tags="|release-loki|applications|software-installation|appcenter|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9346" PostTypeId="2" ParentId="7885" CreationDate="2016-11-20T13:13:48.013" Score="1" Body="&lt;p&gt;I finally found a solution to this.&lt;/p&gt;&#xA;&lt;p&gt;Open terminal and type&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;cd /usr/bin&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo mv zeitgeist-daemon zeitgeist-daemon.bak&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo reboot&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I noticed the &lt;strong&gt;Zeitgeist-daemon&lt;/strong&gt; was affecting my &lt;strong&gt;Slingshot&lt;/strong&gt;. On the &lt;strong&gt;downside&lt;/strong&gt; if you have to use &lt;strong&gt;Security &amp;amp; Privacy on Switchboard it wont open&lt;/strong&gt;. You would &lt;strong&gt;need&lt;/strong&gt; to launch &lt;strong&gt;zeitgeist-daemon.bak&lt;/strong&gt; first and then try to open it.&lt;/p&gt;&#xA;&lt;p&gt;By disabling zeitgeist-daemon, the &lt;strong&gt;first time&lt;/strong&gt; you open Slingshot will fill a bit &lt;strong&gt;slow&lt;/strong&gt; but then after that it will &lt;strong&gt;always&lt;/strong&gt; work fine.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-11-20T13:13:48.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9347" PostTypeId="1" CreationDate="2016-11-20T14:31:13.497" Score="0" ViewCount="152" Body="&lt;p&gt;I've been using eOS for few years now on the same machine and all works fine. However today, for no apparent reason, there is no wi-fi network support. The Network Manager doesn't even suggest wi-fi or scan for wi-fi networks. I am lucky enough to have a USB wireless adapter and after plugging it in, I get wi-fi access again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could have happened? How can I troubleshoot? Please help. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="7462" LastActivityDate="2019-01-03T09:11:56.993" Title="Wi-Fi suddenly disappeared" Tags="|networking|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9348" PostTypeId="1" CreationDate="2016-11-20T15:32:59.373" Score="1" ViewCount="2332" Body="&lt;p&gt;When browsing with Epiphany, I get lots of &lt;em&gt;&quot;Oops! Unable to display this website.&quot;&lt;/em&gt;. &#xA;Need to reload pages very often, say about 7 out of ten. I use Firefox now (downloaded from AppCenter), which is stable. But I like Epiphany for its speed. What could be a solution to failing to load pages? My system is updated daily and the internet connection is solid. In Firefox the same browsing actions never result in errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Below the info in such an event:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The site at “xxx” seems to be unavailable. The precise error was:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Error resolving 'xxx': Temporary failure in name resolution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be temporarily unavailable or moved to a new address. You may wish to verify that your internet connection is working correctly.&lt;/p&gt;&#xA;" OwnerUserId="7388" LastEditorUserId="7388" LastEditDate="2016-11-21T19:03:31.417" LastActivityDate="2018-06-22T09:29:51.710" Title="Epiphany &quot;Oops! Unable to display this website.&quot;" Tags="|epiphany|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9351" PostTypeId="1" CreationDate="2016-11-20T22:21:49.840" Score="8" ViewCount="541" Body="&lt;p&gt;I have recently installed Elementary OS, Loki on a Mac Mini (mid 2010).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I successfully configure a bluetooth keyboard and trackpad (both apple) using the 'System Settings::Bluetooth' panel. Pairing works fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I logout and login, the paired keyboard and trackpad continue to work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I suspend and resume, Bluetooth has been disabled in the bluetooth panel and in wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I reboot, Bluetooth has been disabled in the bluetooth panel and in wingpanel. (same as suspend resume...but I fear root cause may be different).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To recover, I merely re-enable bluetooh and my devices re-pair. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The frustration is that I cannot use a bluetooh keyboard/trackpad which will not wake the computer from sleep or be unavailable after reboot.&lt;/p&gt;&#xA;" OwnerUserId="7465" LastEditorUserId="14940" LastEditDate="2018-11-30T20:10:13.593" LastActivityDate="2018-11-30T20:10:13.593" Title="Can I get bluetooth devices to remain after suspend/resume and/or reboot" Tags="|release-loki|wingpanel|bluetooth|suspend|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9353" PostTypeId="2" ParentId="9345" CreationDate="2016-11-21T10:53:27.420" Score="2" Body="&lt;p&gt;Approach 1)&#xA;You could add some &quot;custom&quot; Repositories which contain the latest versions of you desired programs. The Ubuntu/ElementaryOS repos sometimes are out of date&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Approach 2)&#xA;You could Download the Software directly from some Website&lt;/p&gt;&#xA;" OwnerUserId="7471" LastActivityDate="2016-11-21T10:53:27.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9354" PostTypeId="1" AcceptedAnswerId="9361" CreationDate="2016-11-21T11:23:20.737" Score="2" ViewCount="350" Body="&lt;p&gt;Hi I'm new to elementary os. I had network-manager says my wifi connected perfectly. I installed docker, now network-manager reports wired network disconneted (though wifi is working correctly).&#xA;Is there a way to tell network-manager to show only wireless (and not docker useless network interfaces) ?&lt;/p&gt;&#xA;" OwnerUserId="7469" LastActivityDate="2016-11-21T20:48:44.353" Title="Loki 0.4 - network-manager applet shows disconnected after docker installation" Tags="|release-loki|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9356" PostTypeId="1" CreationDate="2016-11-21T13:57:31.780" Score="1" ViewCount="117" Body="&lt;p&gt;I would like to install Windows 10 in my second partition, but I don't want to break my ElementaryOS install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have all ready break my windows install (yesterday) so I don't want to make mistakes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank.&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-11-21T16:27:25.793" Title="How to re-install windows without breaking my eOS" Tags="|release-loki|dual-boot|grub|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9358" PostTypeId="2" ParentId="9356" CreationDate="2016-11-21T16:27:25.793" Score="2" Body="&lt;p&gt;The Windows installation process generally does mess with Grub, the Linux bootloader. One way to prevent such issues is to install Windows in a virtual machine such as &lt;a href=&quot;https://www.virtualbox.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;VirtualBox&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/92874/how-do-i-install-windows-7-alongside-a-pre-existing-ubuntu-installation#92877&quot;&gt;This answer&lt;/a&gt; has more information on how to install Windows and then get your Linux setup working again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you've already backed up your data, the simplest option might be to do a clean install of Windows, replacing elementary, then install elementary alongside Windows. This probably sounds like extra work, but in general it's easier to install Linux onto a Windows machine than it is to install Windows onto a Linux machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information, see &lt;a href=&quot;https://help.ubuntu.com/community/WindowsDualBoot&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu's Windows Dual Boot guide&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-11-21T16:27:25.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9360" PostTypeId="2" ParentId="7714" CreationDate="2016-11-21T20:28:27.313" Score="-1" Body="&lt;p&gt;This has to do with online accounts in &lt;strong&gt;&lt;em&gt;System Settings&lt;/em&gt;&lt;/strong&gt;. In Ubuntu this is easy to fix. Just add Google as an online account in &lt;em&gt;&quot;&lt;strong&gt;System settings -&gt; Online accounts&lt;/strong&gt;&quot;&lt;/em&gt; and the sync problem (login every reboot) will go away. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However in elementary OS, you cannot add a Google account in &lt;strong&gt;&lt;em&gt;Online accounts&lt;/em&gt;&lt;/strong&gt; (hopefully, at least not yet) in &lt;strong&gt;&lt;em&gt;System Settings&lt;/em&gt;&lt;/strong&gt;. So for now there seems to be no fix for this (or if it is possible to add the same &lt;em&gt;Online accounts&lt;/em&gt; in Ubuntu to elementary OS then there's a chance.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also one of the reasons this is happening is if you have auto login enabled when logging in to your PC. Disabling it (entering your password every time you login) will solve this issue.&lt;/p&gt;&#xA;" OwnerUserId="4277" LastEditorUserId="4277" LastEditDate="2016-11-22T05:57:48.103" LastActivityDate="2016-11-22T05:57:48.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9361" PostTypeId="2" ParentId="9354" CreationDate="2016-11-21T20:48:44.353" Score="2" Body="&lt;p&gt;This issue has been &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-network/+bug/1628541&quot; rel=&quot;nofollow noreferrer&quot;&gt;logged as a bug&lt;/a&gt;. I'm experiencing a similar issue with Vagrant, which also creates virtual network devices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rebooting should fix the problem until you run Docker again, but of course the real solution is for that bug to be fixed.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-21T20:48:44.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9362" PostTypeId="2" ParentId="7714" CreationDate="2016-11-21T21:16:46.300" Score="1" Body="&lt;p&gt;Setting this keyring to blank should let it do its thing without bothering you. If you have already set it up, trash your keyring and restart Chrome to receive the fresh prompt, where you can set it to not use a password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the following locations for the keychain (remember to save a copy as backup first):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;~/.gnome2/keyrings/default.keyring&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;~/.local/share/keyrings/*&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;More elaboration and links at &lt;a href=&quot;https://unix.stackexchange.com/q/324843/42894&quot;&gt;my Unix SE post&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2016-11-21T21:16:46.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9363" PostTypeId="2" ParentId="4161" CreationDate="2016-11-21T23:20:02.557" Score="-1" Body="&lt;p&gt;Add &lt;code&gt;nomodeset acpi=off&lt;/code&gt;, (Shift and then press e on elementary os) but I have the same problem installing nvidia drivers&lt;/p&gt;&#xA;" OwnerUserId="7484" LastEditorUserId="26" LastEditDate="2016-11-22T13:16:52.833" LastActivityDate="2016-11-22T13:16:52.833" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9364" PostTypeId="1" CreationDate="2016-11-21T23:56:30.093" Score="1" ViewCount="2498" Body="&lt;p&gt;I installed this with additional drivers for a nvidia gt520m but when I restart, black screen appear, this is a fresh elementary os loki; yesterday I installed manually the driver via terminal, but the black screen appear too; what I need to do? I can do CTRL + ALT + F1 but lightdm have some problem, so that restarted every 5 seconds, so I need to stop this via terminal with &#xA;sudo /etc/init.d/lightdm stop; what is the problem? If I dont install the nvidia drivers, I can manage all in the graphical system, but when I reboot with the nvidia drivers, black screen!&lt;/p&gt;&#xA;" OwnerUserId="7484" LastActivityDate="2019-06-13T21:16:21.277" Title="BlackScreen after install Nvidia Drivers" Tags="|display|greeter|drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9366" PostTypeId="2" ParentId="8056" CreationDate="2016-11-22T03:38:53.687" Score="-2" Body="&lt;p&gt;Back up your data and make a fresh install.&lt;/p&gt;&#xA;" OwnerUserId="5547" LastActivityDate="2016-11-22T03:38:53.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9367" PostTypeId="2" ParentId="9317" CreationDate="2016-11-22T08:06:01.957" Score="0" Body="&lt;p&gt;Go to this link:&#xA;&lt;a href=&quot;https://www.learnenough.com/git-tutorial#sec-prompt_branches_and_tab_completion&quot; rel=&quot;nofollow noreferrer&quot;&gt;Prompt branches and tab completion&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will show just the current folder and if inside a git repository it will show the current branch as well.&lt;/p&gt;&#xA;" OwnerUserId="4277" LastActivityDate="2016-11-22T08:06:01.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9368" PostTypeId="2" ParentId="9317" CreationDate="2016-11-22T11:24:31.823" Score="0" Body="&lt;p&gt;The answer to the first three questions is &lt;a href=&quot;https://github.com/Lokaltog/vim-powerline&quot; rel=&quot;nofollow noreferrer&quot;&gt;powerline&lt;/a&gt;.&#xA;I personally also used &lt;a href=&quot;http://fishshell.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;fish&lt;/a&gt;, which is cool if you don't care for compatibility. If you do, the answer is zsh and particularly &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh&quot; rel=&quot;nofollow noreferrer&quot;&gt;oh-my-zsh&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="575" LastEditorUserId="575" LastEditDate="2016-11-22T11:31:04.390" LastActivityDate="2016-11-22T11:31:04.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9369" PostTypeId="2" ParentId="9204" CreationDate="2016-11-22T11:32:54.440" Score="0" Body="&lt;p&gt;There is workaround process that i found when i try to install eOS loki/Ubuntu 16.04 using UEFI mode(want to remove windows 10)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;First, install eOS (force UEFI) normally. Reboot, this time you will face there is no operating system.&lt;/li&gt;&#xA;&lt;li&gt;Enter the installation process and install the eOS again. This time the installation will proceed with UEFI mode. You may recreate all of your partition again with EFI boot partition (recommend - create all partition again). &lt;/li&gt;&#xA;&lt;li&gt;After finish, reboot to the system. Check if your installation is in UEFI mode using this command: &lt;code&gt;sudo efibootmgr&lt;/code&gt;  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad English.&lt;/p&gt;&#xA;" OwnerUserId="6916" LastActivityDate="2016-11-22T11:32:54.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9370" PostTypeId="2" ParentId="9101" CreationDate="2016-11-22T14:42:53.000" Score="0" Body="&lt;p&gt;I always install software-properties-gtk after installing Elementary OS and encounter this issue everytime with PPTP.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After reinstalling ElementaryOS the last time, I decided to skip installing software-properties-gtk and never encountered the issue since. Even after multiple restarts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the software-properties-gtk package breaks the VPN configuration tool since I was able to connect to a VPN (PPTP) using a fresh live USB of Elementary OS without issues.  The software-properties-gtk has been removed from Ubuntu 16.04 and might be causing issues with the newer packages of Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="7476" LastActivityDate="2016-11-22T14:42:53.000" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9372" PostTypeId="2" ParentId="9317" CreationDate="2016-11-22T19:10:55.213" Score="1" Body="&lt;p&gt;You can customize your bash prompt by editing the &lt;code&gt;PS1&lt;/code&gt; and &lt;code&gt;PS2&lt;/code&gt; environment variables. &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-customize-your-bash-prompt-on-a-linux-vps&quot; rel=&quot;nofollow noreferrer&quot;&gt;Digital Ocean's Bash Prompt tutorial&lt;/a&gt; explains how this works. You could also use a tool like &lt;a href=&quot;http://ezprompt.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;EZPrompt&lt;/a&gt; to generate the variable for you.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-22T19:10:55.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9373" PostTypeId="2" ParentId="9339" CreationDate="2016-11-22T23:46:29.967" Score="4" Body="&lt;p&gt;I don't know how to get this to work with libinput, but here is how to install synaptics and set it up how you want. The process is fairly easy. Just install synaptics and set up a conf file. If you want to have multitouch gestures then you have to build synaptics instead of installing the package. You will also have to set up a second conf file. It is a little more work but handy. I use it for four finger swipes to change workspaces, three finger swipes to go forward and back in a bowser and three fingers up and down to open terminal and to minimize the current applications. You can set the gestures to do any keyboard command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Optional (Do this if you want multitouch gestures)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install a build environment and dependencies for synaptics. In a terminal run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install build-essential libevdev-dev autoconf automake&#xA;libmtdev-dev xorg-dev xutils-dev liberal git libx11-guitest-perl&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You now have all the tools to build from source and, hopefully, all the dependencies to build synaptics. If I forgot a package that synaptics needs it will throw up an error during the build process. You'll have to install the missing packages and start the build again, but I think this is all you will need.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Grab the source code. In the terminal run:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; git clone https://github.com/dieghen89/xserver-xorg-input-synaptics&#xA; xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Synaptics has dropped -m in recent builds. This is a forked version that keeps that function and is needed for multitouch gestures. Building the forked version didn't take long on my laptop, but did require editing three files. Go to the folder downloaded by the git command. Look in the src folder. You are looking for three files:&#xA;These files are all located in the src directory and are named as follows:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;eventcomm.h&lt;/li&gt;&#xA;&lt;li&gt;ps2comm.h&lt;/li&gt;&#xA;&lt;li&gt;synproto.h&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You need to add &lt;code&gt;#include &amp;lt;xorg-server.h&amp;gt;&lt;/code&gt; to these three files. Just copy and paste it in right above the other #includes.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;build and install synaptics from the terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd xserver-xorg-input-synaptics&#xA;./autogen.sh&#xA;./configure --exec_prefix=/usr&#xA;make&#xA;sudo apt-get remove xserver-xorg-input-synaptics  xserver-xorg-input-libinput&#xA;sudo make install&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;removing xserver-xorg-input-synaptics is probably unnecessary since it is not installed by default, but if it is installed, you want to remove it before installing this build of synaptics. At this point you can reboot and the trackpad will work via synaptics with default settings.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Setting up synaptics.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you don't want multitouch gestures you can skip the above and just install the regular version of synaptics&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once synaptics is install it is time to edit the conf file. The .conf files are in /usr/share/X11/xorg.conf.d I don't like to alter them too much. I leave them pretty much as is, just comment out what I don't want. This makes it easy to revert back to the original configurations if I ever need to. I opened 50-synaptics.conf and commented out all the trackpad section by putting a # in front of each line. I created a separate 50-synaptics.conf file in /etc/X11/xorg.conf.d This is just a personal preference. You could back up 50-synaptics.conf with the following command and then edit the 50-synaptics.conf file instead of creating a new one.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /usr/share/X11/xorg.conf.d/50-synaptics.conf.bk &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is the touchpad section from my 50-synaptics.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;InputClass&quot;&#xA;        Identifier &quot;evdev touchpad catchall&quot;&#xA;        Driver &quot;synaptics&quot;&#xA;        MatchDevicePath &quot;/dev/input/event*&quot;&#xA;        MatchIsTouchpad &quot;on&quot;&#xA;                Option &quot;Protocol&quot; &quot;event&quot;&#xA;                Option &quot;SHMConfig&quot; &quot;on&quot;&#xA;                Option &quot;TapButton3&quot; &quot;3&quot;&#xA;                Option &quot;TapButton2&quot; &quot;2&quot;&#xA;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can change switch TapButton3&quot; &quot;3&quot; to TapButton3&quot; &quot;2&quot; and set Tapbutton2 to &quot;3&quot;. set that however you want then reboot and two finger tap and three finger tap will work. I have mine set for two finger = right click and three finger = middle click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more synaptics' options see &lt;a href=&quot;https://wiki.archlinux.org/index.php/Touchpad_Synaptics&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Set up multitouch gestures.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Download the xSwipe script.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd &amp;amp;&amp;amp; wget https://github.com/iberianpig/xSwipe/archive/e39800f21c1c33f38c3794d367d657f355296356.zip &amp;amp;&amp;amp; unzip e39800f21c1c33f38c3794d367d657f355296356.zip &amp;amp;&amp;amp; mv xSwipe-e39800f21c1c33f38c3794d367d657f355296356 xSwipe &amp;amp;&amp;amp; rm e39800f21c1c33f38c3794d367d657f355296356.zip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command downloads the script, extracts it, moves it to a folder called xSwipe and deletes the downloaded zip file. To configure it you will need to edit the eventKey.cfg file. There are two of these. One is in the main folder and one is in the nScroll folder. If you want to use Apple style Natural Scrolling then edit the one in nScroll, otherwise edit the one in the main folder. You will notice there is a section in the cfg for gnome, unity and pantheon. Pantheon is the DE for elementary, but editing this section doesn't work on Loki. It did work on Freya, but for Loki you need to edit the &quot;other&quot; section. Here is what mine looks like.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;'other'=&amp;gt;{&#xA;    swipe2 =&amp;gt;{&#xA;        press   =&amp;gt;  &quot;default&quot;,&#xA;    },&#xA;    swipe3 =&amp;gt;{&#xA;        right   =&amp;gt;  &quot;LAL/LEF&quot;,       # alt +  left&#xA;        left    =&amp;gt;  &quot;LAL/RIG&quot;,       # alt +  right &#xA;        down    =&amp;gt;  &quot;LSK/h&quot;,         # super + h&#xA;        up      =&amp;gt;  &quot;F12&quot;,         # F12&#xA;        press   =&amp;gt;  &quot;F12&quot;,        # F12&#xA;    },&#xA;    swipe4=&amp;gt;{&#xA;        right   =&amp;gt;  &quot;LSK/LEF&quot;,       # super +  left&#xA;        left    =&amp;gt;  &quot;LSK/RIG&quot;,       # super +  right    &#xA;        down    =&amp;gt;  &quot;LAL/TAB&quot;,   # alt +  tab &#xA;        up      =&amp;gt;  &quot;LSH/LAL/TAB&quot;,    # shift + alt +  tab        &#xA;        press   =&amp;gt;  &quot;LAL/F8&quot;,        # alt + F8&#xA;    },&#xA;    swipe5=&amp;gt;{&#xA;        right   =&amp;gt;  &quot;LAL/LEF&quot;,       # alt +  left &#xA;        left    =&amp;gt;  &quot;LAL/RIG&quot;,       # alt +  right &#xA;        down    =&amp;gt;  &quot;LCT/LAL/UP&quot;,    # ctrl + alt + up &#xA;        up      =&amp;gt;  &quot;LCT/LAL/DOW&quot;,   # ctrl + alt + down&#xA;        press   =&amp;gt;  &quot;LAL/F7&quot;,        # alt + F7&#xA;    },&#xA;    edgeSwipe2=&amp;gt;{&#xA;        right    =&amp;gt;  &quot;LAL/TAB&quot;,       # ctrl + tab &#xA;        left     =&amp;gt;  &quot;LSH/LAL/TAB&quot;,   # shift + ctrl + tab &#xA;    },            &#xA;    edgeSwipe3=&amp;gt;{&#xA;        down    =&amp;gt;  &quot;LAL/F4&quot;,        # alt + F4 &#xA;        up      =&amp;gt;  &quot;LCT/LAL/t&quot;,     # ctrl + alt + t &#xA;    },&#xA;    edgeSwipe4=&amp;gt;{&#xA;        down    =&amp;gt;  &quot;LAL/F4&quot;,        # alt + F4 &#xA;        up      =&amp;gt;  &quot;LCT/LAL/t&quot;,     # ctrl + alt + t &#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can set a gesture to do any keyboard command see &lt;a href=&quot;https://github.com/iberianpig/xSwipe/wiki/Customize-eventKey.cfg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for how the script names keyboard keys. To run xSwipe run this command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;perl ~/xSwipe/xSwipe.pl &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;-n&lt;/code&gt; if you want natural scrolling. Add &lt;code&gt;-e&lt;/code&gt; if you want edge scrolling. I've set this up on a half dozen Loki machines without much trouble, but on a couple launching xSwipe made 3 finger tapping not work. I was able to fix this by creating a simple launch script for xSwipe. Go to the xSwipe folder in files. Right click and go to make new file. Name it xSwipe.sh and paste in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;perl /home/username/xSwipe/xSwipe.pl &amp;amp;&#xA;sleep 10s&#xA;synclient TapButton3=3 &amp;amp;&#xA;synclient TapButton2=2 &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change username to your username, add &lt;code&gt;-n&lt;/code&gt;/&lt;code&gt;-e&lt;/code&gt; and adjust the tapbuttons to your liking. This will launch xSwipe, wait a few seconds then reapply the tapbutton settings. To make the script executable run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/xSwipe/xSwipe.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run it with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./home/username/xSwipe/xSwipe.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Muiltitouch gestures only work when xSwipe is running in the background, but it must be set to run on every boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do this by navigating to &lt;code&gt;System Settings&amp;gt;Applications&amp;gt;Startup&lt;/code&gt; then click the plus button in the lower left corner. In the bottom of the dialogue that launches you will see an option to enter a custom command, enter &lt;code&gt;perl ~/xSwipe/xSwipe.pl&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastEditorUserId="6861" LastEditDate="2017-03-05T08:50:06.670" LastActivityDate="2017-03-05T08:50:06.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9374" PostTypeId="2" ParentId="7714" CreationDate="2016-11-23T02:58:52.337" Score="1" Body="&lt;p&gt;It's because you have auto login set. If you disable auto login Chrome will not ask each time. It's a security &quot;feature&quot;.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2016-11-23T02:58:52.337" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9377" PostTypeId="1" CreationDate="2016-11-23T15:51:57.213" Score="1" ViewCount="1349" Body="&lt;p&gt;I want to open the first application shortcut of plank with &quot;windows button + 1&quot; exactly like Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to achieve this ?&lt;/p&gt;&#xA;" OwnerUserId="7501" LastEditorUserId="26" LastEditDate="2016-11-23T15:58:34.257" LastActivityDate="2016-11-23T15:58:34.257" Title="How can I add a keyboard shortcut to a plank shortcut?" Tags="|release-loki|plank|keyboard-shortcuts|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9379" PostTypeId="2" ParentId="9302" CreationDate="2016-11-23T19:09:58.320" Score="1" Body="&lt;p&gt;Disabling USB autosuspend completely – as described in the previous answer –  will increase power consumption considerably. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I finer approach would be to isolate the offending USB device by blacklisting the devices &lt;em&gt;one by one&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;USB_BLACKLIST=&quot;1111:2222&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and apply the new setting by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo tlp usb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Refer to &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-troubleshooting.html#step6&quot; rel=&quot;nofollow noreferrer&quot;&gt;TLP Troubleshooting&lt;/a&gt; for background on the subject.&lt;/p&gt;&#xA;" OwnerUserId="7504" LastActivityDate="2016-11-23T19:09:58.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9380" PostTypeId="2" ParentId="9283" CreationDate="2016-11-23T22:48:50.790" Score="0" Body="&lt;p&gt;I wonder why I can not find either Renoise or Milky Tracker in the Elementary AppCenter. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my experience recording in both windows and mac It is no secret you need a lot of configuration prior recording anything (either audio or midi) Not to mention having decent hardware and up to date plugins to run them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Linux however great is no exception. It can be frustrating to configure Jack if you're not into the linux world.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, the real reason I'm in this forum is because I want to know &lt;strong&gt;if there's any 'out-of-the-box' working DAW for music production.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot in advance!&lt;/p&gt;&#xA;" OwnerUserId="7508" LastActivityDate="2016-11-23T22:48:50.790" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9381" PostTypeId="1" CreationDate="2016-11-23T22:54:09.757" Score="1" ViewCount="610" Body="&lt;p&gt;I recently installed Loki on my machine. I was running two monitors on an AMD FirePro 7000. I installed an Nvidia GTX 970, and only one monitor was being recognized. I tried various combinations of cables (HDMI, DisplayPort, and DVI).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After rebooting with a DVI cable, the monitor was showing garbage. Now I have no way to reach the greet screen. Any combination of cable boots to a screen full of vertical lines (&lt;a href=&quot;https://i.stack.imgur.com/LKB8e.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/LKB8e.jpg&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How might I be able to reinstall my graphics drivers?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I noticed that the motherboard splash screen was taking much longer than before. I am unable to get into BIOS settings, boot menu, or anything that requires a keypress. I was going to reinstall the OS, but I can't do anything&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[UPDATE] I removed the graphics card itself, and made it to the greet screen with a DVI cable plugged into the motherboard. I searched for nvidia packages with &lt;code&gt;dpkg --get-selections | grep nvidia&lt;/code&gt; and removed anything with nvidia in the name. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalled the graphics card, and turned the machine on. DVI was still trashed, but plugging into HDMI gave me a login screen. Yay! used the instructions in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7472/install-nvidia-dual-graphics-driver-on-loki&quot;&gt;this post&lt;/a&gt;, described below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo ubuntu-drivers list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;intel-something-or-other&#xA;nvidia-367 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, with &lt;code&gt;$ sudo ubuntu-drivers autoinstall&lt;/code&gt;, some great drivers installed. The greatest drivers. Everything works now, back to two monitors with an Nvidia GTX 970 from an AMD FirePro 7000.&lt;/p&gt;&#xA;" OwnerUserId="7507" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-24T03:57:58.647" Title="graphics driver broken [solved]" Tags="|graphic-drivers|nvidia|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9382" PostTypeId="1" CreationDate="2016-11-24T00:43:14.263" Score="0" ViewCount="176" Body="&lt;p&gt;I installed Loki fresh from a usb stick. I replaced the graphics card and had some trouble (see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9381/graphics-driver-broken-solved&quot;&gt;this question&lt;/a&gt;) After fixing this, the bootup process takes an extremely long time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bootup with the AMD card was fast. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bootup with no graphics card is fast. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bootup with Nvidia card is slow. Before, time from reboot button to login screen was &amp;lt; 1 minute. Now it spends at least that long on the motherboard splash screen. Let me know if I can provide more info.&lt;/p&gt;&#xA;" OwnerUserId="7507" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-03T20:36:08.340" Title="Long load time on bootup with nvidia graphics card" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9383" PostTypeId="1" CreationDate="2016-11-24T01:50:55.310" Score="1" ViewCount="590" Body="&lt;p&gt;I have just reinstalled my laptop from Windows 10 to elementary OS 0.4 Loki. In Windows 10, my touchpad works but just the basics (point &amp;amp; click, no two-finger gestures). But in Loki, even from the live session running from my USB drive, the touchpad would stop working after a while, usually about 5-10 seconds from login. In that 5 to 10 seconds, the touchpad works flawlessly, even two-finger gestures. But after that, suddenly it kind of freezes there, not registering my taps and clicks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is &lt;strong&gt;Acer Aspire E5-552G-F6X5.&lt;/strong&gt; My touchpad driver is &lt;strong&gt;Synaptics.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried a few ways to fix it, but to no avail:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Editing the /etc/default/grub by running this code:&lt;br&gt;&#xA;&lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;&lt;br&gt;&#xA;and then changing the line:&lt;br&gt;&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet nosplash&quot;&lt;/code&gt;&lt;br&gt;&#xA;to: &lt;br&gt;&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;i8042.nomux i8042.reset quiet nosplash&quot;&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;This doesn't fix my touchpad problems.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Disabling libinput and forcing eOS to use Synaptics by using these codes:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install xserver-xorg-input-synaptics&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo mkdir /etc/X11/xorg.conf.d&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /etc/X11/xorg.conf.d&lt;/code&gt;&lt;br&gt;&lt;br&gt;&#xA;&lt;strong&gt;The code gives me error at the &lt;em&gt;mkdir&lt;/em&gt; part, where it says:&lt;br&gt;&lt;/strong&gt;&#xA;&lt;code&gt;mkdir: cannot create directory ‘/etc/X11/xorg.conf.d’: File exists&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Removing the libinput drivers and installs the Synaptics driver by running these codes:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&lt;/code&gt;&lt;br&gt;&#xA;Then:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;This also failed to fix my touchpad problems.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Running &lt;code&gt;sudo modprobe -r psmouse&lt;/code&gt; followed by &lt;code&gt;sudo modprobe psmouse&lt;/code&gt;, &lt;strong&gt;which also failed to fix it.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Most interesting here is the fact that if I ran &lt;code&gt;xinput list&lt;/code&gt;, the touchpad is shown there as:&lt;br&gt;&#xA;⎜   ↳ SYN1B81:01 06CB:7406 Touchpad             id=12   [slave  pointer  (2)]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have looked all over internet for the solution of this problem. I'm completely new to the Linux environment, and chose eOS for its ease of use. Actually, I expected eOS to work with this laptop's touchpad out of the box. My question is, what I must do to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much beforehand.&lt;/p&gt;&#xA;" OwnerUserId="7509" LastActivityDate="2016-11-24T01:50:55.310" Title="Touchpad stops working after a while" Tags="|release-loki|touchpad|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9384" PostTypeId="2" ParentId="5504" CreationDate="2016-11-24T03:37:54.757" Score="1" Body="&lt;p&gt;Downloaded this theme and had a look. You are right to edit the apps.css in the gtk-3 folder. It has a panel setting for budgie and one that is just panel. It isn't set up the same way as the one in the elementary theme. I deleted it and replaced it with the one in my elementary theme's apps.css. The panel changed to look like the default so just replace the panel section with the one below and edit as you like. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*********&#xA; * Panel *&#xA; ********/&#xA;&#xA;.panel {&#xA;    background-color: alpha(#000, 0.3);&#xA;    transition: all 100ms ease-in-out;&#xA;}&#xA;&#xA;.panel.maximized {&#xA;    background-color: #000;&#xA;}&#xA;&#xA;.panel.translucent {&#xA;    background-color: alpha(#000, 0.5);&#xA;}&#xA;&#xA;.composited-indicator &amp;gt; revealer label,&#xA;.composited-indicator &amp;gt; revealer image,&#xA;.composited-indicator &amp;gt; GtkRevealer {&#xA;    color: #fff;&#xA;    font-weight: bold;&#xA;    text-shadow:&#xA;        0 0 2px alpha (#000, 0.3),&#xA;        0 1px 2px alpha (#000, 0.6);&#xA;    icon-shadow:&#xA;        0 0 2px alpha (#000, 0.3),&#xA;        0 1px 2px alpha (#000, 0.6);&#xA;    transition: all 200ms ease-in-out;&#xA;}&#xA;&#xA;.composited-indicator .keyboard {&#xA;    background-color: #fff;&#xA;    border-radius: 2px;&#xA;    box-shadow:&#xA;        0 0 2px alpha (#000, 0.3),&#xA;        0 1px 2px alpha (#000, 0.6);&#xA;    color: #333;&#xA;    font-weight: 600;&#xA;    padding: 0 3px;&#xA;    text-shadow: none;&#xA;}&#xA;&#xA;.panel.color-light .composited-indicator &amp;gt; revealer label,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer image,&#xA;.panel.color-light .composited-indicator &amp;gt; GtkRevealer {&#xA;    color: alpha (#000, 0.65);&#xA;    text-shadow:&#xA;        0 0 2px alpha (#fff, 0.3),&#xA;        0 1px 0 alpha (#fff, 0.25);&#xA;    icon-shadow:&#xA;        0 0 2px alpha (#fff, 0.3),&#xA;        0 1px 0 alpha (#fff, 0.25);&#xA;}&#xA;&#xA;.panel.color-light .composited-indicator .keyboard {&#xA;    background-color: alpha (#000, 0.65);&#xA;    box-shadow:&#xA;        0 0 2px alpha (#fff, 0.3),&#xA;        0 1px 0 alpha (#fff, 0.25);&#xA;    color: #fff;&#xA;    text-shadow: none;&#xA;}&#xA;&#xA;.panel .popover {&#xA;    box-shadow:&#xA;        inset 0 -1px 0 0 alpha (@bg_highlight_color, 0.5),&#xA;        0 3px 4px alpha (#000, 0.15),&#xA;        0 3px 3px -3px alpha (#000, 0.35);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-24T03:37:54.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9385" PostTypeId="2" ParentId="8414" CreationDate="2016-11-24T09:06:34.127" Score="2" Body="&lt;p&gt;I've had this problem for the past few days. The problem seems to be with the &lt;code&gt;nvidia-smi&lt;/code&gt; tool that ships with NVIDIA drivers. I tried multiple driver versions, but the same problem arises.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did a little reading and it seems that &lt;code&gt;nvidia-smi&lt;/code&gt; is not compatible with a lot of lower spec'd GeForce graphics cards anyway, so you can disable it and the problem goes away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you comment out this line:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ACTION==&quot;add&quot; DEVPATH==&quot;/module/nvidia&quot; SUBSYSTEM==&quot;module&quot; RUN+=&quot;/usr/bin/nvidia-smi&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;in this file:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/lib/udev/rules.d/*-nvidia.rules&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The problem goes away.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="7512" LastEditorUserId="7512" LastEditDate="2020-04-22T07:14:12.177" LastActivityDate="2020-04-22T07:14:12.177" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9387" PostTypeId="2" ParentId="81" CreationDate="2016-11-24T14:00:44.067" Score="1" Body="&lt;p&gt;I reinstalled the system after a while and a new hard drive. Didn't have the problem at all so it must have been solved in updates.&#xA;It's always better to update than to muck about with things&lt;/p&gt;&#xA;" OwnerUserId="2867" LastActivityDate="2016-11-24T14:00:44.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9388" PostTypeId="1" CreationDate="2016-11-24T14:11:17.433" Score="0" ViewCount="427" Body="&lt;p&gt;The wingpanel disappears after few seconds of starting up. I have tried many methods, trying to remove indicator-synapse and also reseting settings to default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I typed wingpanel in terminal it showed the following results -&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 19:31:25.879082] Application.vala:155: System Panel version: 2.0.1&#xA;[INFO 19:31:25.879140] Application.vala:157: Kernel version: 4.4.0-47-generic&#xA;[FATAL 19:31:26.006260] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 19:31:26.007278] wingpanel_widgets_overlay_icon_set_main_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 19:31:26.190710] [GLib-GIO] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[FATAL 19:31:26.190785] [GLib-GIO] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[FATAL 19:31:26.190994] [GLib-GIO] g_file_get_child: assertion 'G_IS_FILE (file)' failed&#xA;[FATAL 19:31:26.191061] [GLib-GIO] g_file_query_exists: assertion 'G_IS_FILE(file)' failed&#xA;[FATAL 19:31:26.191135] gee_abstract_collection_get_size: assertion 'self != NULL' failed&#xA;[WARNING 19:31:26.191205] Theme.vala:508: Currently selected gtk+ theme 'elementary' does not provide a dock theme, fallback to the built-in defaults!&#xA;[FATAL 19:31:26.366372] [GLib] g_hash_table_get_keys: assertion 'hash_table != NULL' failed&#xA;[14:01:26.677358 Warning] [DesktopFileInfo] Unable to get exec for Other&#xA;[14:01:26.688649 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;&#xA;** (process:3971): CRITICAL **: string_contains: assertion 'self != NULL' failed&#xA;&#xA;** (process:3971): CRITICAL **: string_contains: assertion 'self != NULL' failed&#xA;[14:01:27.048320 Info] Tweaks.vala:307: Activating Tweak plug&#xA;[14:01:27.055878 Warning] GtkSettings.vala:48: Error loading GTK+ Keyfile settings.ini: No such file or directory&#xA;[14:01:27.055925 Warning] GtkSettings.vala:69: Error getting GTK+ int setting: Key file does not have group 'Settings'&#xA;[ERROR 19:31:27.175130] [GLib-GIO] Settings schema 'org.pantheon.terminal.settings' does not contain a key named 'opacity'&#xA;Trace/breakpoint trap (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7516" LastEditorUserId="26" LastEditDate="2016-11-24T14:20:49.583" LastActivityDate="2016-12-03T17:24:00.110" Title="Wingpanel disappears after few seconds of starting up!" Tags="|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9391" PostTypeId="1" CreationDate="2016-11-24T20:20:57.087" Score="2" ViewCount="629" Body="&lt;p&gt;So I installed Elementary OS and its really great, but I have a big issue with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The whole system crashes or freezes (no cursor movement or ctrl + alt + f1) when watching video with the &quot;Video&quot; application or when I try to connect to my SMB server. Before that I had issue with shutdown/hibernate/restart, so I searched around and deleted the &quot;quite splash&quot; part in the GRUB, which helped with the shutdown/hibernate/restart problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output for dmesg: &lt;a href=&quot;http://pastebin.com/Hrk1ydmX&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pastebin.com/Hrk1ydmX&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="7520" LastActivityDate="2018-09-23T03:02:17.473" Title="Elementary OS freezes while watching Video or when connecting to a SMB server" Tags="|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9392" PostTypeId="2" ParentId="8343" CreationDate="2016-11-24T20:59:09.213" Score="1" Body="&lt;p&gt;I had this issue on (K)ubuntu 16.04.1 - there seems to be a problem with HDMI for some sound drivers. (I have a Radeon HD 7970 series sound card.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first solution here worked for me:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/405071/static-and-crackling-in-my-hdmi-audio&quot;&gt;https://askubuntu.com/questions/405071/static-and-crackling-in-my-hdmi-audio&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From this discussion &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=116172&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=116172&lt;/a&gt; comes an explanation of the setting:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;tsched=0 disables&lt;/strong&gt; PulseAudio's &lt;strong&gt;timer-based scheduling&lt;/strong&gt; and uses the classic interrupt-driven approach. Timer-based scheduling allows for better latency management and reduced CPU usage. It puts very strict requirements on the ALSA drivers. &lt;strong&gt;Unfortunately, some drivers do not handle it well.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I suspect the problem is immediately caused by the text-to-speech module in Firefox Reader View but not sure how. &lt;/p&gt;&#xA;" OwnerUserId="7522" LastActivityDate="2016-11-24T20:59:09.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9394" PostTypeId="1" CreationDate="2016-11-25T01:21:35.347" Score="2" ViewCount="2998" Body="&lt;p&gt;Probably I am missing something obvious. This gives:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;apt-get source linux-image-$(uname -r) &#xA;Reading package lists... Done&#xA;Picking 'linux' as source package instead of 'linux-image-4.4.0-47-generic'&#xA;E: Unable to find a source package for linux&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;apt-get build-dep linux-image-$(uname -r)&#xA;Reading package lists... Done&#xA;Picking 'linux' as source package instead of 'linux-image-4.4.0-47-generic'&#xA;E: Unable to find a source package for linux-image-4.4.0-47-generic&lt;/p&gt;&#xA;" OwnerUserId="7524" LastActivityDate="2020-10-13T07:15:32.110" Title="Can't get linux-image source" Tags="|kernel|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9396" PostTypeId="1" CreationDate="2016-11-25T05:36:04.553" Score="3" ViewCount="230" Body="&lt;p&gt;I am curious in the calendar app instead of always looking at the month view, can I set it to show a week at a time? I have opened dconf and looked around there to see if there was an option to change it but did not see it&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-25T06:04:24.827" Title="Maya work view or day view" Tags="|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9397" PostTypeId="1" CreationDate="2016-11-25T05:54:26.243" Score="2" ViewCount="3186" Body="&lt;p&gt;For example, I open Chrome, Terminal in work-space 1 and I switch to workspace 2, the dock still shows that chrome and terminal are opened. This is a complete different behavior from Windows, where if you switch to a parallel desktop, it completely starts afresh, without any apps opened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe that the workspace in Ubuntu also works in a similar manner to parallel desktops in Windows (Correct me if I wrong).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I incorrectly assuming that work-space in Elementary and parallel desktop in Windows are the same features?&lt;/p&gt;&#xA;" OwnerUserId="6748" LastActivityDate="2016-12-26T07:48:30.127" Title="When I switch to a different work-space, why does the dock indicate apps opened in the other work-space(s)?" Tags="|plank|workspace|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9398" PostTypeId="2" ParentId="9397" CreationDate="2016-11-25T06:00:30.223" Score="0" Body="&lt;p&gt;Actually this is a design issue. Plank (that is the dock app in elementary OS) displays all windows opened on any of your workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS does not always works in the same way as Windows does, for instance in this case. However, feel free to look for another dock app if it is a no-go for you.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-25T06:00:30.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9399" PostTypeId="2" ParentId="9396" CreationDate="2016-11-25T06:04:24.827" Score="2" Body="&lt;p&gt;There is no such feuture for now but the issue has been drafted: &lt;a href=&quot;https://blueprints.launchpad.net/maya/+spec/different-views&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blueprints.launchpad.net/maya/+spec/different-views&lt;/a&gt;&lt;br&gt;&#xA;(cf., &lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1073336&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/maya/+bug/1073336&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-25T06:04:24.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9400" PostTypeId="1" CreationDate="2016-11-25T08:13:28.960" Score="2" ViewCount="390" Body="&lt;p&gt;I have set up a virtual machine, and I have included a lot customizations. &#xA;Now I decided to transfer the virtual machine in the place of a windows pc. I know that I can cp -a all, and restore it. But it would be interesting to create a custom iso of loki, like remastersys did for ubuntu. Is it possible somehow?&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="7527" LastActivityDate="2016-11-27T03:43:27.943" Title="create a custom .iso of loki" Tags="|release-loki|settings|iso|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9402" PostTypeId="1" AcceptedAnswerId="9418" CreationDate="2016-11-25T13:23:51.637" Score="0" ViewCount="1007" Body="&lt;p&gt;I've installed Elementary OS Loki on my laptop yesterday. At the beginning everything was OK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But last night after some installation and system updates I cannot shutdown Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I shutdown Elementary OS, after turning screen off the system just goes crazy, fan running at full speed and processor almost screaming.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I leave it in this case a while and then hard shut down manually, some times the laptop cannot found SSD at first running. After manually restart, everything goes well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to figured out what happened by reviewing &lt;code&gt;/var/log/syslog&lt;/code&gt; file. But nothing caught my attention.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had read that Ubuntu 16.04 has a &lt;code&gt;SAMBA&lt;/code&gt; bug which causes a similar issue.&#xA;Then I run the command of &lt;code&gt;sudo chmod 744 /usr/lib/gvfs/gvfsd-smb-browse&lt;/code&gt; as directed &lt;a href=&quot;https://itsfoss.com/fix-gvfsd-smb-high-cpu-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;over here&lt;/a&gt;. But it didn't work on my case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Is there any chance to overcome this issue&lt;/em&gt; &lt;strong&gt;&lt;em&gt;?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot shutdown Elementary OS properly.&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="7495" LastEditDate="2016-11-26T08:54:53.660" LastActivityDate="2020-05-27T22:47:50.363" Title="Cannot shut down and CPU fan goes crazy" Tags="|release-loki|updates|shutdown|laptop|ssd|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9403" PostTypeId="2" ParentId="5487" CreationDate="2016-11-25T14:42:13.173" Score="0" Body="&lt;p&gt;The reponse to the question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9069/how-can-i-have-the-same-applications-in-the-dock-for-the-guest-session-as-i-have&quot;&gt;how to customize guest session&lt;/a&gt; should help you to customize your guest session. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to create a new test user, customize &lt;strong&gt;System Settings &gt; Language and Region&lt;/strong&gt; and &lt;strong&gt;Set Language&lt;/strong&gt; as suggested by Suici Doga and copy these files to &lt;code&gt;/etc/guest-session/skel&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-25T14:42:13.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9404" PostTypeId="1" AcceptedAnswerId="14088" CreationDate="2016-11-25T15:01:26.973" Score="1" ViewCount="695" Body="&lt;p&gt;I want to keep the dock hidden and to show it with a short-key associated to a command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a such command to show the Plank dock?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When shown I would prefer to have it under rather than above maximized window.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-12-06T17:07:32.157" Title="Command to show Plank dock" Tags="|release-loki|plank|keyboard-shortcuts|command-line|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9405" PostTypeId="1" CreationDate="2016-11-25T17:15:09.193" Score="1" ViewCount="161" Body="&lt;p&gt;I've been a Windoze user for years but i've been getting increasingly annoyed with the bloat, especially after the recent free Windows 10 upgrade. So i thought it was time to choose an alternative operating system, namely Elementary.&#xA;I decided to setup my system as a dual boot, so i could test elementary alongside my Windows 10 installation. My hard disk is a Seagate 1TB SSHD (hybrid) and only contained two partitions, C: for Windows and S: for Storage. I had 50gb of unallocated space, which is where i wanted to install Elementary using the following guide &lt;a href=&quot;http://linoxide.com/linux-how-to/install-elementary-loki-usb-dual-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://linoxide.com/linux-how-to/install-elementary-loki-usb-dual-boot/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once i was in the Elementary installer, i entered my name and location and proceeded to scan for partitions. At this point i got a pop up box telling me something about incompatible partitions, UEFI and non GPT discs, i can't exactly remember. The installer advised me not to proceed (i had no intention of proceeding after that warning anyway, if i don't know what it means, then best left alone is my motto). So i clicked cancel in the installer and my PC restarted, but wouldn't boot to windows 10, just a black screen with a blinking cursor.&#xA;I installed a second old sata HD with a temporary install of Windos on, just so i could get into Administrative Tools to viw the partition. The screenshot below is the result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XyJgD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XyJgD.png&quot; alt=&quot;[2]&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disk 0 is my 1TB SSHD and Disk 1 is my temporary windows install which is allowing me to type this.&#xA;I cant understand why disk 0 is showing as 487mb and 931gb partitions, as when it was working ffine i think my C partition was 100gb and my S partition was about800 gb. Maybe it was the previous 'system reserved' partition ?&#xA;Anyway, i'd like to know if it's possible to restore the partitions and get Windows booting again ? I'm going to be very annoyed if the hard drive is brink just because i filled in my name and location in the Elementary installer and then clicked cancel after the warning.&#xA;Please help, i'm desperate !&lt;/p&gt;&#xA;" OwnerUserId="7529" LastEditorUserId="7529" LastEditDate="2016-11-25T17:20:21.117" LastActivityDate="2016-11-25T17:20:21.117" Title="Help, have i bricked my Seagate 1TB SSHD?" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9406" PostTypeId="1" CreationDate="2016-11-25T19:32:40.547" Score="1" ViewCount="142" Body="&lt;p&gt;I've been trying to make an application with arduino and HC-05 bluetooth module that sends information to processing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In processing code, to read serial data I chose port with Serial.list()[x], where x is a number of opened port.&#xA;But each time I connect to HC-05 it connects for few seconds and disconnects - moreover there is a bug that when I click HC-05 in bluetooth menu at the top right corner to connect it adds another icon of this module to menu and one is connected(for these few seconds) and the other returns information that it cannot establish connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to establish bluetooth connection HC-05 -- Processing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've googled it and usually it is sth with rfcomm.conf, but I can't see anything like that in my files.&#xA;I know that on windows there's similar situation (that HC-05 disconnects after few seconds), but it connects after running processing code. However, it does not work on elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd be grateful for any help. :)&lt;/p&gt;&#xA;" OwnerUserId="7531" LastActivityDate="2016-11-25T19:32:40.547" Title="HC-05 module to Processing" Tags="|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9407" PostTypeId="1" CreationDate="2016-11-25T22:58:21.993" Score="5" ViewCount="590" Body="&lt;p&gt;I wonder if there is a decent DAW for elementaryOS that can be used straight out of the box. That is to say: With minimal configuration, a beautiful minimalist yet functional professional and engaging interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, could we build one...?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;DAW stands for Digital Audio Workstation. There are several packages for PC,Mac and Linux that can do that job and usually the best ones are only available under commercial license. (Protools, Cakewalk, Samplitude, Reason)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In any case most of them require a certain degree of technical knowledge, proper hardware and spend sometime configuring stuff that in my opinion is never as friendly as it should be. Not to mention a very complex UI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Linux, however great, also requires huge effort configuring Jack. I've unsuccessfully tried using Ardour, Rosegarden and many other tools available in the App center. Most of them are good but still not quite what I'm looking for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe elementary OS to be the perfect platform to develop a simple yet powerful app capable of recording both audio and midi in a simple way. What I basically need is something that can be installed from the App center and requires minimal configuration. Just plug a mic, usb, analog or midi, and then record.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm posting this question because I'd be willing to develop such an app in accordance to elementary's elegant standards. But I would need help and support from fellow programmers as I feel I lack the needed skills to accomplish that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any one interested in this idea?&lt;/p&gt;&#xA;" OwnerUserId="7508" LastActivityDate="2022-10-11T11:32:14.197" Title="An 'out-of-the-box' working DAW for music production" Tags="|appcenter|audio|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9408" PostTypeId="1" CreationDate="2016-11-26T00:08:18.803" Score="2" ViewCount="134" Body="&lt;p&gt;I received this message when updating Operating System from the AppCenter. How could this update not be from a trusted source? Could it be that my AppCenter has been compromised?&lt;a href=&quot;https://i.stack.imgur.com/kSM8C.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kSM8C.png&quot; alt=&quot;Dialog window in question&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5783" LastActivityDate="2016-12-30T08:38:56.743" Title="&quot;The software is not from a trusted source&quot; when updating Operating System from AppCenter" Tags="|release-loki|updates|appcenter|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9409" PostTypeId="1" AcceptedAnswerId="9426" CreationDate="2016-11-26T11:29:55.370" Score="0" ViewCount="115" Body="&lt;p&gt;I recently bought a new computer and was looking at the different linux  distributions and this one got me right away (my prev is a Macbook and the os is pretty similar). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed the drivers using the terminal and the version is 367, but when I go to the nvidia website I see unix drivers version 375. Is this normal ?&lt;/p&gt;&#xA;" OwnerUserId="7537" LastActivityDate="2016-11-28T10:06:21.880" Title="Nvidia Drivers question" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9410" PostTypeId="1" AcceptedAnswerId="9411" CreationDate="2016-11-26T14:38:08.590" Score="5" ViewCount="521" Body="&lt;p&gt;I was using the nice screenshot-tool on elementary loki and after taking a screenshot of a window it crashed without prompting for saving the screenshot. Now my system is stuck with the obscured text, also after rebooting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L7zXi.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L7zXi.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you know any fast way to get back the text?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: the problem is a known bug (&lt;a href=&quot;https://bugs.launchpad.net/screenshot-tool/+bug/1592363&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/screenshot-tool/+bug/1592363&lt;/a&gt;).&#xA;A workaround is installing elementary-tweaks and press the button reset font in the font tab.&#xA;I had some real panic moments, I work with my PC. This bug is very bad in my opinion and the medium status is not enough.&lt;/p&gt;&#xA;" OwnerUserId="7542" LastEditorUserId="7542" LastEditDate="2016-11-26T20:31:08.907" LastActivityDate="2016-11-26T22:33:42.307" Title="screenshot-tool crashed and my system is stuck with obscured text" Tags="|release-loki|screenshot|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9411" PostTypeId="2" ParentId="9410" CreationDate="2016-11-26T14:50:27.320" Score="0" Body="&lt;p&gt;In the case of the OP, the original font settings needed to be restored.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other suggestions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You might want to open the screenshot app again and uncheck &quot;conceal&#xA;text&quot; (even without taking a screenshot).&lt;/li&gt;&#xA;&lt;li&gt;You might try to open a   guest session to check what has been changed.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-11-26T22:33:42.307" LastActivityDate="2016-11-26T22:33:42.307" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9412" PostTypeId="2" ParentId="9400" CreationDate="2016-11-26T15:06:05.467" Score="0" Body="&lt;p&gt;If you have time, you can always try it with the Ubuntu version of Respin/Remastersys (&lt;a href=&quot;http://www.remastersys.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.remastersys.org/&lt;/a&gt;). But there is no guarantee that it will work with elementary OS as well. If you decide to do so, you might even want to answer your question based on the experience you have.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you only need one pc with your custom install, the way you suggested (&quot;&lt;code&gt;cp -a&lt;/code&gt;&quot;) should be the fastest and safest way to do it.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-26T15:06:05.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9413" PostTypeId="2" ParentId="9394" CreationDate="2016-11-26T15:20:14.537" Score="1" Body="&lt;p&gt;To install kernel source you have to enable source repositories, that is have a &lt;code&gt;deb-src&lt;/code&gt; line that corresponds to the main repository &lt;code&gt;deb&lt;/code&gt; line in the &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file. For instance,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After you can get the kernel source of the actual running kernel with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt update&#xA;apt source linux-image-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-26T15:20:14.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9415" PostTypeId="2" ParentId="9400" CreationDate="2016-11-27T03:43:27.943" Score="2" Body="&lt;p&gt;I had to install Loki multiple times, but I used the official iso file, and created a bash script, that set up my system for my needs. I suggest You do the same, just list everything You've done earlier as bash commands and run the script after installation.&lt;/p&gt;&#xA;" OwnerUserId="6960" LastActivityDate="2016-11-27T03:43:27.943" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9416" PostTypeId="1" CreationDate="2016-11-27T03:58:22.627" Score="1" ViewCount="33" Body="&lt;p&gt;I'm using elementary os loki, i can't found touchpad disable feature on settings. how can i disable touchpad in elementary loki?&lt;/p&gt;&#xA;" OwnerUserId="6454" LastActivityDate="2016-11-27T03:58:22.627" Title="How to Enable or disable touch pad in elementary os loki?" Tags="|release-loki|settings|touchpad|" AnswerCount="0" CommentCount="0" ClosedDate="2016-11-29T11:49:05.690" ContentLicense="CC BY-SA 3.0" />
  <row Id="9418" PostTypeId="2" ParentId="9402" CreationDate="2016-11-27T12:35:08.053" Score="0" Body="&lt;p&gt;I've downgraded the linux kernel to get rid of this issue!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge linux-image-4.4.0-51-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my kernel version is &lt;code&gt;4.4.0-38-generic&lt;/code&gt; and there is no any shutdown issue.&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="7495" LastEditDate="2016-12-05T16:15:15.460" LastActivityDate="2016-12-05T16:15:15.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9421" PostTypeId="1" CreationDate="2016-11-27T20:18:49.663" Score="1" ViewCount="251" Body="&lt;p&gt;First, let me extend a kudos to the developers. Your distro has kept my interest MUCH longer than any other in over 15 years of use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second, I'm entertaining using this on my HTPC which runs Kodi, Steam, etc on my 55in tv, which I sit about 15-18 feet away from. What settings would you guys (the devs and/or the community) recommend for optimum view-ability while working within the desktop environment? I need to be able to interact with OS applications and their menus as well as the browser. Would implementing a &quot;big picture&quot; or &quot;large display&quot; mode benefit a lot of users?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Third, this is just a minor request I've made for every linux distro since its inception......there needs to be Solaar for Logitech Unifying Receiver available either by default or in the software center&lt;/p&gt;&#xA;" OwnerUserId="7560" LastActivityDate="2017-08-13T16:28:37.897" Title="What's the best way to setup Elementary for a &quot;10ft interface&quot;?" Tags="|settings|display|user-interface|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9422" PostTypeId="2" ParentId="6790" CreationDate="2016-11-27T21:40:52.840" Score="0" Body="&lt;p&gt;I am almost certain that is not possible in Plank, but I am answering in order to mention an alternative that would reach the main purpose of getting a proper Plank icon for multiple commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of having a folder button in the dock without a real icon, we can have &lt;strong&gt;a normal launcher with multiple &quot;Desktop Actions&quot;&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The practical difference is that with a no-icon dock folder you left-click to get the list of launchers, while here you will have to &lt;strong&gt;right-click&lt;/strong&gt; the dock icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You are probably familiar with desktop actions, as they are present in other dock launchers as right-click options like those of Firefox or Chromium (to start a new window in incognito mode or temporary profile) or of media players like Clementine or Deadbeef (Play, Pause, Stop, Previous, Next).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right-clicking the Clementine launcher you get this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u8CK0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u8CK0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The number and type of actions accessible with double-click is set by editing the corresponding desktop file. Usually those actions lack icons, but those can be added once a &lt;code&gt;Icon=&lt;/code&gt; line is put under each action as below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The form of such a file should be like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=&#xA;Name=&#xA;Actions=FIRST-ACTION;SECOND-ACTION&#xA;Type=Application&#xA;&#xA;[Desktop Action FIRST-ACTION]&#xA;Name=&#xA;Exec=&#xA;Icon=&#xA;&#xA;[Desktop Action SECOND-ACTION]&#xA;Name=&#xA;Exec=&#xA;Icon=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Exec=&lt;/code&gt; line under &lt;code&gt;[Desktop Entry]&lt;/code&gt; category (to run a program with a single left click like normal dock launchers) is not absolutely necessary, but it is useful and it can also be added, and I would use that for the most important of the programs or commands in this group.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, to have a launcher (with icon) for multiple applications/commands I will give an example for what I use (as the programs from your image are not familiar to me).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will create a launcher for multiple DVD actions and programs. The launcher will start a DVD in &lt;code&gt;mpv&lt;/code&gt; player with left click and will have two desktop actions (accessible as a list with right click): playing the DVD in VLC and ejecting the disk. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To create a launcher &lt;code&gt;.desktop&lt;/code&gt; file (using &lt;code&gt;gedit&lt;/code&gt; text editor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/DVD.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With these lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=mpv-dvd&#xA;Name=Play DVD&#xA;Exec=mpv dvd://&#xA;Actions=vlc;eject&#xA;Type=Application&#xA;&#xA;[Desktop Action vlc]&#xA;Name=Play dvd in VLC&#xA;Exec=vlc dvd://&#xA;Icon=vlc&#xA;&#xA;[Desktop Action eject]&#xA;Name=Eject disk&#xA;Exec=eject&#xA;Icon=eject&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To make the file executable: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/.local/share/applications/DVD.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To get new icons: find the proper png icon with any name, put the icon in &lt;code&gt;~/.local/share/icons&lt;/code&gt; and edit the file above to have the same name as the icon in the line &lt;code&gt;Icon=&lt;/code&gt;. That line under &lt;code&gt;Desktop Entry&lt;/code&gt; category will get the main dock icon; those for each desktop action are those in each desktop action group.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For each program that you want to access in this way you can add one or more such actions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My desktop file above will give this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/plCyJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/plCyJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LmhZ6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LmhZ6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-27T22:57:10.967" LastActivityDate="2016-11-27T22:57:10.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9423" PostTypeId="2" ParentId="396" CreationDate="2016-11-27T22:01:17.363" Score="12" Body="&lt;p&gt;You can put the 'Desktop' docket to Plank (the dock application).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Right&lt;/kbd&gt; click on the dock and select &lt;em&gt;Preferences&lt;/em&gt; from the menu. In the &lt;em&gt;Docklets&lt;/em&gt; tab you can find &lt;em&gt;Desktop&lt;/em&gt;, just drag-and-drop it to the dock application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/D71qE.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D71qE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="16827" LastEditDate="2019-12-31T05:14:42.477" LastActivityDate="2019-12-31T05:14:42.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9424" PostTypeId="2" ParentId="565" CreationDate="2016-11-27T22:40:07.637" Score="2" Body="&lt;p&gt;Changing dock folder icon is not possible in Plank, but in order to get &quot;stacking&quot;, the folder-on-dock--with-no-icon is not the only solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of having a folder button in the dock without a real icon, we can have &lt;strong&gt;a normal launcher with multiple &quot;Desktop Actions&quot;&lt;/strong&gt; - and &lt;strong&gt;WITH&lt;/strong&gt; proper icon(s). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The practical difference is that with a no-icon dock folder you left-click to get the list of launchers, while here you will have to &lt;strong&gt;right-click&lt;/strong&gt; the dock icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We are familiar with desktop actions, as they are present in other dock launchers as right-click options like those of Firefox or Chromium (to start a new window in incognito mode or temporary profile) or of media players like Clementine or Deadbeef (Play, Pause, Stop, Previous, Next).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right-clicking the Clementine launcher you get this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u8CK0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u8CK0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The number and type of actions accessible with double-click is set by editing the corresponding desktop file. Usually those actions lack icons, but those can be added once a &lt;code&gt;Icon=&lt;/code&gt; line is put under each action as below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The form of such a file should be like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=&#xA;Name=&#xA;Actions=FIRST-ACTION;SECOND-ACTION&#xA;Type=Application&#xA;&#xA;[Desktop Action FIRST-ACTION]&#xA;Name=&#xA;Exec=&#xA;Icon=&#xA;&#xA;[Desktop Action SECOND-ACTION]&#xA;Name=&#xA;Exec=&#xA;Icon=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Exec=&lt;/code&gt; line under &lt;code&gt;[Desktop Entry]&lt;/code&gt; category (to run a program with a single left click like normal dock launchers) is not absolutely necessary, but it is useful and it can also be added, and I would use that for the most important of the programs or commands in this group (Music/Noise in the example below).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will give an example for a &quot;stack&quot; of audio players. For this I will create the launcher &lt;code&gt;.desktop&lt;/code&gt; file (using &lt;code&gt;gedit&lt;/code&gt; text editor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/play_music.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With these lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=multimedia-audio-player&#xA;Name=Play music&#xA;Icon=multimedia-audio-player&#xA;Actions=vlc;deadbeef;clementine;banshee;pavucontrol&#xA;Type=Application&#xA;&#xA;[Desktop Action vlc]&#xA;Name=Play VLC&#xA;Exec=vlc &#xA;Icon=vlc&#xA;&#xA;[Desktop Action deadbeef]&#xA;Name=Play Deadbeef&#xA;Exec=deadbeef&#xA;Icon=deadbeef&#xA;&#xA;[Desktop Action clementine]&#xA;Name=Play Clementine&#xA;Exec=clementine&#xA;Icon=clementine&#xA;&#xA;&#xA;[Desktop Action banshee]&#xA;Name=Play Banshee&#xA;Exec=banshee&#xA;Icon=banshee&#xA;&#xA;[Desktop Action pavucontrol]&#xA;Name=PulseAudio Volume Control&#xA;Exec=pavucontrol&#xA;Icon=multimedia-volume-control&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To make the file executable: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/.local/share/applications/play_music.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Icon=&lt;/code&gt; line under &lt;code&gt;Desktop Entry&lt;/code&gt; category will get the main dock icon (in this case the Music/Noise one); the icons for each desktop action are those in each desktop action group. (In case new icons are needed: find the proper png icon with any name, put the icon in &lt;code&gt;~/.local/share/icons&lt;/code&gt; and edit the file above to have the same name as the icon in the line &lt;code&gt;Icon=&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For each program that you want to access in this way you can add one or more such actions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My desktop file above will give this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vwUyD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vwUyD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-28T07:58:33.470" LastActivityDate="2016-11-28T07:58:33.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9425" PostTypeId="2" ParentId="7550" CreationDate="2016-11-28T04:57:39.150" Score="8" Body="&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/applications/dropbox.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then replace the exec line to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start&#xA;&#xA;dropbox stop&#xA;&#xA;dropbox start -i&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2016-11-28T04:57:39.150" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9426" PostTypeId="2" ParentId="9409" CreationDate="2016-11-28T10:06:21.880" Score="0" Body="&lt;p&gt;Yes,it's completely normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The propietary NVIDIA drivers go trough a process that starts from the NVIDIA devs and ends on the Ubuntu/elementaryOS repos. The version available on the NVIDIA website is not a stable version so you would need to wait a bit more to use that one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually it's safe to install any version from the Ubuntu repositories. Those have already been tested so they should work. You are using the 367 version because that's been tested already but there's a newer one (375) that hasn't been tested so installing it may break your system.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-11-28T10:06:21.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9427" PostTypeId="2" ParentId="9402" CreationDate="2016-11-28T11:05:27.160" Score="0" Body="&lt;p&gt;I have this problem with sleep and suspend on a desktop tower, I haven't had this problem before. I am running a relatively new install/ elementary OS 0.3.2 Freya 64. Have tried setting from BIOS and result is same. I don't like messing with the system without knowing what I'm doing. I could re-install but it's a hassle and this is the only problem (touch wood). I'd prefer a work-around.&#xA;It only suspends if I do it manually from desktop. I have to press power button on my tower to un-suspend. I set all the options in system settings but it has no effect. CPU is 4 cores and no sign of sleeping.&#xA;I have not suffered this issue before. The above comment with code is Intel - mine is AMD - this is op-sys not hardware issue.&lt;/p&gt;&#xA;" OwnerUserId="2867" LastEditorUserId="2867" LastEditDate="2016-11-28T11:15:07.193" LastActivityDate="2016-11-28T11:15:07.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9428" PostTypeId="1" AcceptedAnswerId="9523" CreationDate="2016-11-28T12:06:24.613" Score="0" ViewCount="438" Body="&lt;p&gt;I love the app, it gives me 50GB free space, but the icon sucks. I have paper icons installed. And I want to change it to something that goes along with it. Can I manually change the icon to something of my choice ?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2016-12-04T04:22:15.777" Title="Need help with changing the wingpanel icon of MegaSync Linux client" Tags="|release-freya|wingpanel|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9429" PostTypeId="2" ParentId="7341" CreationDate="2016-11-28T13:01:03.063" Score="0" Body="&lt;p&gt;Method 1 : Better you use tab key and spacebar key to select or click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Method 2 : Move the cursor over the object and press space bar key to select or click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation - go to system settings - mouse settings; there you can enable mouse click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try it.&#xA;(sorry for my bad English)&lt;/p&gt;&#xA;" OwnerUserId="6766" LastActivityDate="2016-11-28T13:01:03.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9433" PostTypeId="2" ParentId="9004" CreationDate="2016-11-28T16:46:11.837" Score="0" Body="&lt;p&gt;Wingpanel is behind spotify, if you use the applications menu shortcut (Super+Space) it will appear again, not perfect but it works&lt;/p&gt;&#xA;" OwnerUserId="7567" LastActivityDate="2016-11-28T16:46:11.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9435" PostTypeId="1" CreationDate="2016-11-28T19:02:59.210" Score="1" ViewCount="155" Body="&lt;p&gt;The touchpad on my laptop is the kind without separate buttons, but distinguishes &lt;b&gt;left clicks&lt;/b&gt; (by clicking bottom left corner) from &lt;b&gt;right clicks&lt;/b&gt; (by clicking bottom right corner). The problem is, &lt;b&gt;middle clicks&lt;/b&gt; also used to work when I clicked the middle bottom part of the touchpad, but it no longer works after I've tried &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8413/shaky-mouse-pointer-when-using-touchpad/8422#8422&quot;&gt;this solution to a shaky cursor&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It fixed my shaky cursor problem, but now I can't use the middle click anymore; is there some way to bring back my middle click?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS. Also, is there some way to change the scroll sensitivity manually? After the shaky cursor fix, my scrolls have lost the &quot;flowy&quot; feel to it unless I scroll fast.&lt;/p&gt;&#xA;" OwnerUserId="7569" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-11-28T19:02:59.210" Title="Middle click on touchpad no longer works" Tags="|touchpad|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9437" PostTypeId="1" CreationDate="2016-11-28T20:36:47.440" Score="3" ViewCount="809" Body="&lt;p&gt;I just installed Loki on my HP-G62 laptop. Everything seems to work ok except for one issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open AppCenter, and type just two letters into the search bar (any two), it exits. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My guess is that maybe the AppCenter is designed to start auto-searching for packages once it receives the first two characters, but it crashes instead. I don't see a settings menu to disable the auto search feature, leaving me to just comb through everything to find what I'm looking for. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If run in terminal this happens:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ appcenter&#xA;[INFO 10:43:59.568658] Application.vala:155: App Center version: 0.1.2&#xA;[INFO 10:43:59.568717] Application.vala:157: Kernel version: 4.4.0-51-generic&#xA;[FATAL 10:44:05.366387] Client.vala:429: Update_cache: Refesh cache async failed - W: The repository 'http://ppa.launchpad.net/alexey-smirnov/deadbeef/ubuntu xenial Release' does not have a Release file.W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7571" LastEditorDisplayName="user170" LastEditDate="2016-12-05T09:45:19.480" LastActivityDate="2016-12-05T11:08:34.960" Title="App center crashes when typing into search bar" Tags="|appcenter|" AnswerCount="1" CommentCount="7" ClosedDate="2016-12-05T19:51:55.307" ContentLicense="CC BY-SA 3.0" />
  <row Id="9438" PostTypeId="1" CreationDate="2016-11-28T21:01:14.167" Score="1" ViewCount="455" Body="&lt;p&gt;I, my family, my friends and colleagues have all abandoned Elementary OS for a return to Ubuntu for one simple reason: automounting of external media and devices. It isn't just the bother of have to mount each via the file browser, it's how it stuffs up things like Rhythmbox with stupid crashes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The question we have is will the Elementary developers please consider providing an optional automount of Audio CDs, Video DVDs, mp3 players and the like? We are prepared to live with the security risks.&lt;/p&gt;&#xA;" OwnerUserId="5046" LastEditorUserId="5046" LastEditDate="2016-11-29T16:27:48.540" LastActivityDate="2016-11-29T21:29:52.623" Title="Will the developers add the option to automount external media &amp; devices?" Tags="|mount|dvd|audio-cd|" AnswerCount="2" CommentCount="1" ClosedDate="2016-12-08T06:49:58.950" ContentLicense="CC BY-SA 3.0" />
  <row Id="9440" PostTypeId="1" CreationDate="2016-11-28T21:40:10.730" Score="1" ViewCount="228" Body="&lt;p&gt;I just installed 0.4 Loki and I notice that CTRL + SPACE doesn't bring up the Applications menu like it did in 0.3.2 Freya. Is this a bug or am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="7573" LastActivityDate="2016-11-29T01:53:44.863" Title="CTRL + SPACE not working on 0.4 Loki" Tags="|release-freya|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9443" PostTypeId="1" CreationDate="2016-11-28T22:38:25.157" Score="2" ViewCount="1070" Body="&lt;p&gt;Installed Loki on my surface book but when I reboot the keyboard does not work. The backlight comes on if I touch a key but I don't see anything. Should i install an Ubuntu kernel that has some patches or should I recompile current kernel myself? Thoughts?&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-12-30T19:20:35.387" Title="Keyboard/touchpad does not work Surfacebook" Tags="|keyboard|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9444" PostTypeId="1" AcceptedAnswerId="9459" CreationDate="2016-11-29T01:15:20.397" Score="2" ViewCount="587" Body="&lt;p&gt;Hi I would like to know how to change between the in-build terminal and text editor tabs without mouse in scratch.&lt;/p&gt;&#xA;" OwnerUserId="7576" LastActivityDate="2016-11-29T16:49:13.733" Title="How do I find shortcuts to text editor Scratch?" Tags="|keyboard-shortcuts|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9446" PostTypeId="2" ParentId="9440" CreationDate="2016-11-29T01:53:44.863" Score="4" Body="&lt;p&gt;It uses the &quot;super&quot; key + space. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;super = windows button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's basically an effort to work more like Mac OS&lt;/p&gt;&#xA;" OwnerUserId="7571" LastActivityDate="2016-11-29T01:53:44.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9447" PostTypeId="2" ParentId="9444" CreationDate="2016-11-29T08:32:32.630" Score="0" Body="&lt;p&gt;Alt+{number} where {number} is the order of the tab. I guess it works for up to 9 tabs, as Alt+0 does nothing on my system.&lt;/p&gt;&#xA;" OwnerUserId="1009" LastActivityDate="2016-11-29T08:32:32.630" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9448" PostTypeId="1" CreationDate="2016-11-29T08:58:33.190" Score="1" ViewCount="727" Body="&lt;p&gt;Generally I like the standard elementary theme a lot. But for my development environments I prefer dark ones. I can start Scratch in dark theme by adding &lt;code&gt;env GTK_THEME=elementary:dark&lt;/code&gt; to &lt;code&gt;Exec&lt;/code&gt; command in its .desktop file. But I couldn't figure out how do get that working for Android Studio. If I enable dark theme for all applications in Elementary Tweaks, it works for Android Studio, too. But I really don't like all my Apps do be dark.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Android Studio with standard theme:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/EnKz6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EnKz6.png&quot; alt=&quot;Android Studio with standard theme&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Android Studio with dark theme:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/O8tJr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O8tJr.png&quot; alt=&quot;Android Studio with dark theme&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to start only Android Studio with dark theme like it works with Scratch?&lt;/p&gt;&#xA;" OwnerUserId="7580" LastActivityDate="2016-11-29T10:11:59.580" Title="How to set dark theme for Android Studio?" Tags="|themes|android-studio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9449" PostTypeId="2" ParentId="4446" CreationDate="2016-11-29T09:00:24.967" Score="2" Body="&lt;p&gt;since the link in accepted answer is already invalid, I'd like to give another link. The link below contains custom install script for DropBox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This requires re-install of Dropbox, however. &lt;/p&gt;&#xA;" OwnerUserId="7175" LastActivityDate="2016-11-29T09:00:24.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9450" PostTypeId="2" ParentId="9448" CreationDate="2016-11-29T10:11:59.580" Score="1" Body="&lt;p&gt;Unfortunately only GTK3.10+-applications with a HeaderBar are able to set specific themevariants.&#xA;For any other application there is a workaround:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/oktayacikalin/gtk-theme-variant-switcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gtk Theme Variant Switcher&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install it and add the &lt;code&gt;WM_CLASS&lt;/code&gt; of Android Studio, this should do the trick.&lt;/p&gt;&#xA;" OwnerUserId="22" LastActivityDate="2016-11-29T10:11:59.580" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9451" PostTypeId="1" CreationDate="2016-11-29T10:29:27.707" Score="1" ViewCount="470" Body="&lt;p&gt;So, I have been using Elementary OS for a while now without any problems. However, when I logged on today I wanted to download an app from the appcenter, but when I tried to search it's name in the searchbar the appcenter window just closed. Now I can't type more than one character into the searchbar without it crashing and cannot open any of the category tabs. What is going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: Running it via the terminal gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 15:40:53.598248] Application.vala:155: App Center version: 0.1.2&#xA;[INFO 15:40:53.598292] Application.vala:157: Kernel version: 4.4.0-51-generic&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user7151" LastEditorDisplayName="user7151" LastEditDate="2016-12-03T13:42:22.427" LastActivityDate="2016-12-03T13:42:22.427" Title="Appcenter crashing" Tags="|release-loki|appcenter|" AnswerCount="0" CommentCount="3" ClosedDate="2016-12-06T18:08:49.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="9452" PostTypeId="2" ParentId="9443" CreationDate="2016-11-29T12:22:02.920" Score="1" Body="&lt;p&gt;&lt;strong&gt;There isn't a complete solution right now. If you continue with the following you won't be able to use a external screen and also you'll have some security bugs in your system.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Since you mentioned it earlier that updating to the current mainline kernel (4.8) didn't solve your issues you need to install a custom kernel.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:tigerite/kernel&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&#xA;sudo apt install linux-surface        &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That commands are going to add a PPA, update your system and install the stable kernel from that PPA.&#xA;Then you have to reboot and it's done!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~tigerite/+archive/ubuntu/kernel&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~tigerite/+archive/ubuntu/kernel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2016-11-30T18:52:00.173" LastActivityDate="2016-11-30T18:52:00.173" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="9453" PostTypeId="1" CreationDate="2016-11-29T12:22:20.200" Score="1" ViewCount="78" Body="&lt;p&gt;Love Elementary OS - after years of trying different Linux flavours this is the one that has finally tempted me away from Windows 7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've noted a strange behaviour in the VPN connections list - I have multiple connections in the list. If there is an active connection, and I accidentally click on one of the inactive connections both are removed from the list until the settings app is closed and reopened. In one instance, the active connection was duplicated in the list after reopening, leaving me with two identical VPN configurations in the list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not a big problem - it has no functional impact that I can see, but it's a strange behaviour. I'd also love to see a VPN connection list under the right-click context menu for network connections in the wing panel, in a future version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe someone can also tell me how to contribute financially to the development of Elementary now it's my regular OS.&lt;/p&gt;&#xA;" OwnerUserId="7583" LastActivityDate="2016-11-29T16:42:23.753" Title="VPN list strange behaviour" Tags="|vpn|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-06T18:30:54.917" ContentLicense="CC BY-SA 3.0" />
  <row Id="9454" PostTypeId="1" CreationDate="2016-11-29T12:55:23.830" Score="2" ViewCount="1994" Body="&lt;p&gt;I strongly dislike the unintuitive behavior of the ALT+TAB switcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications running:&#xA; 1. Files, &#xA; 2. Firefox&#xA; 3. Terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to reproduce:&#xA; - Press ALT+TAB twice&#xA; - Press ALT+SHIFT+TAB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Expected application to pop up:&#xA;Firefox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Application that pops up:&#xA;Terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is happening because ALT+SHIFT+TAB simply replaces the running applications list, and starts from the back, without taking notice of the place where ALT+TAB was focused in the list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to change this behavior, without installing a new window manager?&lt;/p&gt;&#xA;" OwnerUserId="6724" LastActivityDate="2016-11-29T12:55:23.830" Title="Change alt+tab behaviour" Tags="|window-management|gala|window-manager|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-06T18:30:22.927" ContentLicense="CC BY-SA 3.0" />
  <row Id="9455" PostTypeId="1" CreationDate="2016-11-29T15:19:16.210" Score="1" ViewCount="65" Body="&lt;p&gt;Using 0.4 Loki, if I browse 'entire network' to my SMB servers, it defaults to connection by ftp. In this case jpg files don't have an icon preview, and if the file is loaded from the network share, it won't display (although the photo editor opens). The same file copied to local storage previews and opens ok.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Forcing a SMB (window share) connection to the same server, the jpg files now do open correctly, but still have no icon preview.&lt;/p&gt;&#xA;" OwnerUserId="7583" LastActivityDate="2016-11-29T15:19:16.210" Title="Photo icon preview from SMB network share" Tags="|networking|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-06T18:29:30.400" ContentLicense="CC BY-SA 3.0" />
  <row Id="9456" PostTypeId="2" ParentId="4336" CreationDate="2016-11-29T15:50:09.813" Score="1" Body="&lt;p&gt;You can use Davmail to access your Exchange account and transform the calendar access to CalDAV.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;First, install Davmail from &lt;a href=&quot;http://davmail.sourceforge.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://davmail.sourceforge.net/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Configure it by pointing it to your Exchange OWA URL (you will have to do it the first time you run the application. If you want to change something later you will have to do it by modifying the .davmail.properties and restarting the davmail daemon, since Elementary Loki lacks a system tray)&lt;/li&gt;&#xA;&lt;li&gt;Add a new calendar to Maya by using an address in the form &lt;a href=&quot;http://localhost:1080/users/mail@company.com/calendar&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:1080/users/mail@company.com/calendar&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Be aware of this issue: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7990/maya-shows-the-events-the-day-after-but-the-integration-with-wingpanel-works-per&quot;&gt;Maya shows the events the day after but the integration with Wingpanel works perfect&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6990" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-29T15:50:09.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9458" PostTypeId="2" ParentId="9453" CreationDate="2016-11-29T16:42:23.753" Score="1" Body="&lt;p&gt;For your second question check out: &lt;a href=&quot;https://elementary.io/get-involved#funding&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved#funding&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for your first one, you might want to file a bug report instead.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-29T16:42:23.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9459" PostTypeId="2" ParentId="9444" CreationDate="2016-11-29T16:49:13.733" Score="1" Body="&lt;p&gt;You can change between the editor tabs and the terminal with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;t&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-29T16:49:13.733" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9460" PostTypeId="2" ParentId="9438" CreationDate="2016-11-29T17:00:48.690" Score="1" Body="&lt;p&gt;I'm not a developer, so I can't answer your specific question. However it is easy to get automount. There are several ways to do it the easiest is to install usbmount&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install usbmount  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I't will automount  hfsplus, vfat, and ext file systems. If you need to automount other file systems you can add them to &lt;code&gt;/etc/usbmount/usbmount.conf&lt;/code&gt;. It works well out of the box. Just run the one install command and you are probably good to go, but you can change mount options in the config file if you need to.&lt;/p&gt;&#xA;" OwnerUserId="7132" LastActivityDate="2016-11-29T17:00:48.690" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9461" PostTypeId="2" ParentId="2554" CreationDate="2016-11-29T19:26:09.530" Score="2" Body="&lt;p&gt;There are &lt;a href=&quot;https://userstyles.org/styles/browse?search_terms=elementary%20os&quot; rel=&quot;nofollow noreferrer&quot;&gt;userstyles meant for Elementary&lt;/a&gt;, two of them at the moment (with tabs on top or not). For that you need the &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/stylish/?src=hp-dl-featured&quot; rel=&quot;nofollow noreferrer&quot;&gt;Stylish addon&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A thing about these two userstyles is that, unlike themes, they can be used on top of the custom (complete) theme: they will make the theme more &quot;elementarish&quot; but will look different depending on that theme, that is: in order for the end result to be close to a full integration with the elementary look, pick a  complete theme that looks better with the styles. You can use the default theme for that but also look for a different one that may seem more close to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tested with Firefox v. 50.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few examples of the tabs-on-top userstyle with different themes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the default theme:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3eRui.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3eRui.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With FXOpera:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4xHaZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4xHaZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mx3:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/W16VA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/W16VA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe better, Mx4:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Woj2z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Woj2z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, maybe even close to our purpose, the same theme with the other style:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3gy46.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3gy46.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take care not to enable both userstyles at the same time.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There is also the &lt;a href=&quot;https://userstyles.org/styles/132191/firefox-theme-linux-gtk-native-fx-29&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux Gtk+Native&lt;/a&gt; style for OS integration. It replaces the complete theme (unlike the two above) and looks like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/odDU5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/odDU5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-11-29T20:04:04.683" LastActivityDate="2016-11-29T20:04:04.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9463" PostTypeId="2" ParentId="9438" CreationDate="2016-11-29T21:29:52.623" Score="1" Body="&lt;p&gt;There's an &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1094669&quot; rel=&quot;nofollow noreferrer&quot;&gt;open bug for this feature&lt;/a&gt;, so it is on the developers' radar. (See also &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1362041&quot; rel=&quot;nofollow noreferrer&quot;&gt;this related bug&lt;/a&gt;.) In the meantime, you could install a file manager that offers auto-mounting, such as Nautilus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like, you can mark yourself as affected on the bug or &lt;a href=&quot;https://www.bountysource.com/teams/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;post a bounty&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-29T21:29:52.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9464" PostTypeId="1" AcceptedAnswerId="9466" CreationDate="2016-11-29T22:20:04.623" Score="3" ViewCount="313" Body="&lt;p&gt;I don't have credit card nor bitcoins, but I have paypal. Can I make the payment using paypal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="7590" LastEditorUserId="84" LastEditDate="2018-05-06T18:36:45.163" LastActivityDate="2021-01-03T18:14:10.160" Title="Is there any way to donate through PayPal?" Tags="|elementary-project|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9465" PostTypeId="2" ParentId="9428" CreationDate="2016-11-29T23:13:16.700" Score="0" Body="&lt;p&gt;Open up file manager and navigate to where the app is installed. My guess would be &lt;code&gt;/usr/bin&lt;/code&gt;. Right click and go to properties. There should be an option to change the icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not go to &lt;code&gt;/usr/share/application/&lt;/code&gt;. In there find the .desktop for your app, open it with Audi privileges and update path to icon URL. &lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-11-29T23:13:16.700" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9466" PostTypeId="2" ParentId="9464" CreationDate="2016-11-29T23:13:47.537" Score="1" Body="&lt;p&gt;Sure, you can donate a monthly amount (minimum US$5) via Patreon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.patreon.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.patreon.com/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2016-11-29T23:13:47.537" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9467" PostTypeId="1" CreationDate="2016-11-29T23:27:24.847" Score="2" ViewCount="350" Body="&lt;p&gt;Is there a way to rename a tab in pantheon terminal? I looked in dconf-editor but did not see a setting for it to change the name. I tried right clicking on the tab and did not see it as an option. &lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-12-01T14:20:01.503" Title="Terminal rename tab" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9469" PostTypeId="2" ParentId="5346" CreationDate="2016-11-30T04:32:46.207" Score="1" Body="&lt;p&gt;Theoretically, this should be regulated by one of the options in the settings dialogue, as I understand it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has not been working for me, however and I have to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/302/how-do-i-force-noise-to-rescan-my-music-library?rq=1&quot;&gt;re-scan the library manually&lt;/a&gt; every time I want Music to acknowledge a change I made.&lt;/p&gt;&#xA;" OwnerUserId="2354" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-11-30T04:32:46.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9470" PostTypeId="1" CreationDate="2016-11-30T07:22:31.033" Score="2" ViewCount="2840" Body="&lt;p&gt;App center was too good before. But the last update it's being crashed while searching for an app. It crashes right after typing one or two characters. And even when I click on the categories say 'Development' it gets crashed. Any solution. Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error can be seen when launching appcenter from the terminal, after typing 1 character in the search field, the following log appears:&#xA;&lt;code&gt;Client.vala:241: The package id's '' are not valid&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6766" LastEditorUserId="7601" LastEditDate="2016-12-02T16:32:35.677" LastActivityDate="2016-12-09T16:15:52.517" Title="App Center is crashing" Tags="|applications|" AnswerCount="4" CommentCount="4" ClosedDate="2016-12-05T19:53:42.280" ContentLicense="CC BY-SA 3.0" />
  <row Id="9471" PostTypeId="2" ParentId="9140" CreationDate="2016-11-30T07:37:37.477" Score="2" Body="&lt;p&gt;As for now, this should be a feature request for now as there is no such possibility.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as a workaround you can check applicable updates with &lt;code&gt;apt list --upgradable&lt;/code&gt; in a terminal window: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@host:~$ apt list --upgradable&#xA;Listing... Done&#xA;linux-generic/xenial-updates,xenial-security 4.4.0.51.54 amd64 [upgradable from: 4.4.0.47.50]&#xA;linux-headers-generic/xenial-updates,xenial-security 4.4.0.51.54 amd64 [upgradable from: 4.4.0.47.50]&#xA;linux-image-generic/xenial-updates,xenial-security 4.4.0.51.54 amd64 [upgradable from: 4.4.0.47.50]&#xA;linux-libc-dev/xenial-updates,xenial-security 4.4.0-51.72 amd64 [upgradable from: 4.4.0-47.68]&#xA;linux-tools-common/xenial-updates,xenial-updates,xenial-security,xenial-security 4.4.0-51.72 all [upgradable from: 4.4.0-47.68]&#xA;linux-tools-virtual/xenial-updates,xenial-security 4.4.0.51.54 amd64 [upgradable from: 4.4.0.47.50]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-30T07:37:37.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9472" PostTypeId="1" CreationDate="2016-11-30T11:48:18.120" Score="0" ViewCount="494" Body="&lt;p&gt;Trash bin icon on the plank does not minimize the window. When I click on the Trash icon second time it opens another Trash window instead. How can I minimize it. Is there any solution or must wait for a OS update. Help will be appreciated. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="6766" LastActivityDate="2016-11-30T21:41:02.573" Title="Trash bin problem" Tags="|pantheon-files|" AnswerCount="1" CommentCount="2" ClosedDate="2016-12-08T06:53:35.240" ContentLicense="CC BY-SA 3.0" />
  <row Id="9475" PostTypeId="1" AcceptedAnswerId="9476" CreationDate="2016-11-30T15:30:38.603" Score="1" ViewCount="1254" Body="&lt;p&gt;I'm having trouble installing MatLab R2015A on elementary OS Loki. Can anyone help ?! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Here's the log I got:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(Nov 30, 2016 13:19:11) ##################################################################&#xA;(Nov 30, 2016 13:19:11) #&#xA;(Nov 30, 2016 13:19:11) # Today's Date: &#xA;(Nov 30, 2016 13:19:11) Wed Nov 30 13:19:10 BRST 2016&#xA;(Nov 30, 2016 13:19:11) &#xA;(Nov 30, 2016 13:19:11) System Info&#xA;(Nov 30, 2016 13:19:11) OS: Linux 4.4.0-47-generic&#xA;(Nov 30, 2016 13:19:11) Arch: amd64&#xA;(Nov 30, 2016 13:19:11) Data Model: 64&#xA;(Nov 30, 2016 13:19:11) Language: pt&#xA;(Nov 30, 2016 13:19:11) Java Vendor: Oracle Corporation&#xA;(Nov 30, 2016 13:19:11) Java Home: /tmp/mathworks_7662/sys/java/jre/glnxa64/jre&#xA;(Nov 30, 2016 13:19:11) Java Version: 1.7.0_60&#xA;(Nov 30, 2016 13:19:11) Java VM Name: Java HotSpot(TM) 64-Bit Server VM&#xA;(Nov 30, 2016 13:19:11) Java Class Path: .&#xA;(Nov 30, 2016 13:19:11) User Name: root&#xA;(Nov 30, 2016 13:19:11) Current Directory: /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:19:11) Input arguments: &#xA;(Nov 30, 2016 13:19:11) root /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:19:11) libdir /tmp/mathworks_7662&#xA;(Nov 30, 2016 13:19:11) standalone true&#xA;(Nov 30, 2016 13:19:12) Starting local product/component search in download directory&#xA;(Nov 30, 2016 13:19:12) Searching for archives...&#xA;(Nov 30, 2016 13:19:12) Reading /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:19:13) 4353 files found in /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:19:13) Reading /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:19:13) 15 files found in /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:19:13) /root/Downloads/MathWorks/R2015a/archives doesn't exist ... skipping.&#xA;(Nov 30, 2016 13:19:13) Archive search complete.  4368 total files found.&#xA;(Nov 30, 2016 13:19:37) Completed local product/component search&#xA;(Nov 30, 2016 13:19:37) java.io.FileNotFoundException: File '/home/franciscone/MatlaLinux/Matlab/archives/glnxa64/idelink/errorhandler_resources_glnxa64_1419898838.xml' does not exist&#xA;    at org.apache.commons.io.FileUtils.openInputStream(FileUtils.java:299)&#xA;    at com.mathworks.install.input.FileInputStreamProvider.getInputStream(FileInputStreamProvider.java:20)&#xA;    at com.mathworks.install.XMLInstallationFileParserImpl.readInDefinition(XMLInstallationFileParserImpl.java:94)&#xA;    at com.mathworks.install.input.AbstractInstallationInputFile.readInDefinitions(AbstractInstallationInputFile.java:82)&#xA;    at com.mathworks.install.input.AbstractInstallationInputFile.parse(AbstractInstallationInputFile.java:68)&#xA;    at com.mathworks.install.AbstractSoftwareManagerBuilder$2.call(AbstractSoftwareManagerBuilder.java:79)&#xA;    at com.mathworks.install.AbstractSoftwareManagerBuilder$2.call(AbstractSoftwareManagerBuilder.java:74)&#xA;    at java.util.concurrent.FutureTask.run(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)&#xA;    at java.lang.Thread.run(Unknown Source)&#xA;&#xA;(Nov 30, 2016 13:19:37) java.io.FileNotFoundException: File '/home/franciscone/MatlaLinux/Matlab/archives/glnxa64/idelink/errorhandler_resources_glnxa64_1419898838.xml' does not exist&#xA;    at org.apache.commons.io.FileUtils.openInputStream(FileUtils.java:299)&#xA;    at com.mathworks.install.input.FileInputStreamProvider.getInputStream(FileInputStreamProvider.java:20)&#xA;    at com.mathworks.install.XMLInstallationFileParserImpl.readInDefinition(XMLInstallationFileParserImpl.java:94)&#xA;    at com.mathworks.install.input.AbstractInstallationInputFile.readInDefinitions(AbstractInstallationInputFile.java:82)&#xA;    at com.mathworks.install.input.AbstractInstallationInputFile.parse(AbstractInstallationInputFile.java:68)&#xA;    at com.mathworks.install.AbstractSoftwareManagerBuilder$2.call(AbstractSoftwareManagerBuilder.java:79)&#xA;    at com.mathworks.install.AbstractSoftwareManagerBuilder$2.call(AbstractSoftwareManagerBuilder.java:74)&#xA;    at java.util.concurrent.FutureTask.run(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)&#xA;    at java.lang.Thread.run(Unknown Source)&#xA;&#xA;(Nov 30, 2016 13:19:37) Warning: The following files do not appear to be valid archives:&#xA;&#xA;/home/franciscone/MatlaLinux/Matlab/archives/glnxa64/mwcontents_Simulink85_glnxa64.xml&#xA;/home/franciscone/MatlaLinux/Matlab/archives/glnxa64/mwcontents_MATLAB_Coder28_glnxa64.xml&#xA;(Nov 30, 2016 13:19:52) Default Installation Folder: /usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;(Nov 30, 2016 13:19:58) Confirmation Text: &#xA;Installation folder:&#xA;/usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;&#xA;Installation Size: 10.328 MB&#xA;&#xA;Products:&#xA;MATLAB Distributed Computing Server 6.6&#xA;MATLAB 8.5&#xA;Simulink 8.5&#xA;Aerospace Blockset 3.15&#xA;Aerospace Toolbox 2.15&#xA;Antenna Toolbox 1.0&#xA;Bioinformatics Toolbox 4.5.1&#xA;Communications System Toolbox 6.0&#xA;Computer Vision System Toolbox 6.2&#xA;Control System Toolbox 9.9&#xA;Curve Fitting Toolbox 3.5.1&#xA;Database Toolbox 5.2.1&#xA;Datafeed Toolbox 5.1&#xA;DO Qualification Kit 2.5&#xA;DSP System Toolbox 9.0&#xA;Econometrics Toolbox 3.2&#xA;Embedded Coder 6.8&#xA;Filter Design HDL Coder 2.9.7&#xA;Financial Instruments Toolbox 2.1&#xA;Financial Toolbox 5.5&#xA;Fixed-Point Designer 5.0&#xA;Fuzzy Logic Toolbox 2.2.21&#xA;Global Optimization Toolbox 3.3.1&#xA;HDL Coder 3.6&#xA;HDL Verifier 4.6&#xA;IEC Certification Kit 3.5&#xA;Image Acquisition Toolbox 4.9&#xA;Image Processing Toolbox 9.2&#xA;Instrument Control Toolbox 3.7&#xA;LTE System Toolbox 2.0&#xA;Mapping Toolbox 4.1&#xA;MATLAB Coder 2.8&#xA;MATLAB Compiler 6.0&#xA;MATLAB Compiler SDK 6.0&#xA;MATLAB Production Server 2.1&#xA;MATLAB Report Generator 4.1&#xA;Model Predictive Control Toolbox 5.0.1&#xA;Neural Network Toolbox 8.3&#xA;Optimization Toolbox 7.2&#xA;Parallel Computing Toolbox 6.6&#xA;Partial Differential Equation Toolbox 2.0&#xA;Phased Array System Toolbox 3.0&#xA;Polyspace Bug Finder 1.3&#xA;Polyspace Code Prover 9.3&#xA;RF Toolbox 2.16&#xA;Robotics System Toolbox 1.0&#xA;Robust Control Toolbox 5.3&#xA;Signal Processing Toolbox 7.0&#xA;SimBiology 5.2&#xA;SimDriveline 2.8&#xA;SimElectronics 2.7&#xA;SimEvents 4.4&#xA;SimHydraulics 1.16&#xA;SimMechanics 4.6&#xA;SimPowerSystems 6.3&#xA;SimRF 4.4&#xA;Simscape 3.13&#xA;Simulink 3D Animation 7.3&#xA;Simulink Code Inspector 2.3&#xA;Simulink Coder 8.8&#xA;Simulink Control Design 4.2&#xA;Simulink Design Optimization 2.7&#xA;Simulink Design Verifier 2.8&#xA;Simulink Report Generator 4.1&#xA;Simulink Test 1.0&#xA;Simulink Verification and Validation 3.9&#xA;Stateflow 8.5&#xA;Statistics and Machine Learning Toolbox 10.0&#xA;Symbolic Math Toolbox 6.2&#xA;System Identification Toolbox 9.2&#xA;SystemTest 2.6.9&#xA;Vision HDL Toolbox 1.0&#xA;Wavelet Toolbox 4.14.1&#xA;&#xA;(Nov 30, 2016 13:20:04) java.lang.NullPointerException&#xA;    at com.mathworks.install.ComponentSizeAggregator.add(ComponentSizeAggregator.java:13)&#xA;    at com.mathworks.install.ProductInstallerImpl.downloadProducts(ProductInstallerImpl.java:96)&#xA;    at com.mathworks.install.ProductInstallerImpl.installProducts(ProductInstallerImpl.java:57)&#xA;    at com.mathworks.install.InstallerImpl.install(InstallerImpl.java:100)&#xA;    at com.mathworks.installwizard.model.InstallTask.execute(InstallTask.java:46)&#xA;    at com.mathworks.installwizard.model.AbstractBackgroundTask.execute(AbstractBackgroundTask.java:38)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:73)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:23)&#xA;    at com.mathworks.wizard.worker.WorkerImpl.doInBackground(WorkerImpl.java:24)&#xA;    at javax.swing.SwingWorker$1.call(Unknown Source)&#xA;    at java.util.concurrent.FutureTask.run(Unknown Source)&#xA;    at javax.swing.SwingWorker.run(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)&#xA;    at java.lang.Thread.run(Unknown Source)&#xA;&#xA;(Nov 30, 2016 13:20:04) Error: The application encountered an unexpected error and needs to close.  You may want to try re-installing your product(s).  More information can be found at /tmp/mathworks_root.log&#xA;(Nov 30, 2016 13:20:07) Exiting with status -1&#xA;(Nov 30, 2016 13:20:07) End - Unsuccessful.&#xA;(Nov 30, 2016 13:20:22) ##################################################################&#xA;(Nov 30, 2016 13:20:22) #&#xA;(Nov 30, 2016 13:20:22) # Today's Date: &#xA;(Nov 30, 2016 13:20:22) Wed Nov 30 13:20:22 BRST 2016&#xA;(Nov 30, 2016 13:20:22) &#xA;(Nov 30, 2016 13:20:22) System Info&#xA;(Nov 30, 2016 13:20:22) OS: Linux 4.4.0-47-generic&#xA;(Nov 30, 2016 13:20:22) Arch: amd64&#xA;(Nov 30, 2016 13:20:22) Data Model: 64&#xA;(Nov 30, 2016 13:20:22) Language: pt&#xA;(Nov 30, 2016 13:20:22) Java Vendor: Oracle Corporation&#xA;(Nov 30, 2016 13:20:22) Java Home: /tmp/mathworks_8192/sys/java/jre/glnxa64/jre&#xA;(Nov 30, 2016 13:20:22) Java Version: 1.7.0_60&#xA;(Nov 30, 2016 13:20:22) Java VM Name: Java HotSpot(TM) 64-Bit Server VM&#xA;(Nov 30, 2016 13:20:22) Java Class Path: .&#xA;(Nov 30, 2016 13:20:22) User Name: root&#xA;(Nov 30, 2016 13:20:22) Current Directory: /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:20:22) Input arguments: &#xA;(Nov 30, 2016 13:20:22) root /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:20:22) libdir /tmp/mathworks_8192&#xA;(Nov 30, 2016 13:20:22) standalone true&#xA;(Nov 30, 2016 13:20:24) Starting local product/component search in download directory&#xA;(Nov 30, 2016 13:20:24) Searching for archives...&#xA;(Nov 30, 2016 13:20:24) Reading /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:20:24) 4353 files found in /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:20:24) Reading /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:20:24) 15 files found in /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:20:24) /root/Downloads/MathWorks/R2015a/archives doesn't exist ... skipping.&#xA;(Nov 30, 2016 13:20:24) Archive search complete.  4368 total files found.&#xA;(Nov 30, 2016 13:20:32) Completed local product/component search&#xA;(Nov 30, 2016 13:20:35) Default Installation Folder: /usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;(Nov 30, 2016 13:20:46) Default Installation Folder: /usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;(Nov 30, 2016 13:20:50) Confirmation Text: &#xA;Installation folder:&#xA;/usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;&#xA;Installation Size: 10.328 MB&#xA;&#xA;Products:&#xA;MATLAB Distributed Computing Server 6.6&#xA;MATLAB 8.5&#xA;Simulink 8.5&#xA;Aerospace Blockset 3.15&#xA;Aerospace Toolbox 2.15&#xA;Antenna Toolbox 1.0&#xA;Bioinformatics Toolbox 4.5.1&#xA;Communications System Toolbox 6.0&#xA;Computer Vision System Toolbox 6.2&#xA;Control System Toolbox 9.9&#xA;Curve Fitting Toolbox 3.5.1&#xA;Database Toolbox 5.2.1&#xA;Datafeed Toolbox 5.1&#xA;DO Qualification Kit 2.5&#xA;DSP System Toolbox 9.0&#xA;Econometrics Toolbox 3.2&#xA;Embedded Coder 6.8&#xA;Filter Design HDL Coder 2.9.7&#xA;Financial Instruments Toolbox 2.1&#xA;Financial Toolbox 5.5&#xA;Fixed-Point Designer 5.0&#xA;Fuzzy Logic Toolbox 2.2.21&#xA;Global Optimization Toolbox 3.3.1&#xA;HDL Coder 3.6&#xA;HDL Verifier 4.6&#xA;IEC Certification Kit 3.5&#xA;Image Acquisition Toolbox 4.9&#xA;Image Processing Toolbox 9.2&#xA;Instrument Control Toolbox 3.7&#xA;LTE System Toolbox 2.0&#xA;Mapping Toolbox 4.1&#xA;MATLAB Coder 2.8&#xA;MATLAB Compiler 6.0&#xA;MATLAB Compiler SDK 6.0&#xA;MATLAB Production Server 2.1&#xA;MATLAB Report Generator 4.1&#xA;Model Predictive Control Toolbox 5.0.1&#xA;Neural Network Toolbox 8.3&#xA;Optimization Toolbox 7.2&#xA;Parallel Computing Toolbox 6.6&#xA;Partial Differential Equation Toolbox 2.0&#xA;Phased Array System Toolbox 3.0&#xA;Polyspace Bug Finder 1.3&#xA;Polyspace Code Prover 9.3&#xA;RF Toolbox 2.16&#xA;Robotics System Toolbox 1.0&#xA;Robust Control Toolbox 5.3&#xA;Signal Processing Toolbox 7.0&#xA;SimBiology 5.2&#xA;SimDriveline 2.8&#xA;SimElectronics 2.7&#xA;SimEvents 4.4&#xA;SimHydraulics 1.16&#xA;SimMechanics 4.6&#xA;SimPowerSystems 6.3&#xA;SimRF 4.4&#xA;Simscape 3.13&#xA;Simulink 3D Animation 7.3&#xA;Simulink Code Inspector 2.3&#xA;Simulink Coder 8.8&#xA;Simulink Control Design 4.2&#xA;Simulink Design Optimization 2.7&#xA;Simulink Design Verifier 2.8&#xA;Simulink Report Generator 4.1&#xA;Simulink Test 1.0&#xA;Simulink Verification and Validation 3.9&#xA;Stateflow 8.5&#xA;Statistics and Machine Learning Toolbox 10.0&#xA;Symbolic Math Toolbox 6.2&#xA;System Identification Toolbox 9.2&#xA;SystemTest 2.6.9&#xA;Vision HDL Toolbox 1.0&#xA;Wavelet Toolbox 4.14.1&#xA;&#xA;(Nov 30, 2016 13:20:52) java.lang.NullPointerException&#xA;    at com.mathworks.install.ComponentSizeAggregator.add(ComponentSizeAggregator.java:13)&#xA;    at com.mathworks.install.ProductInstallerImpl.downloadProducts(ProductInstallerImpl.java:96)&#xA;    at com.mathworks.install.ProductInstallerImpl.installProducts(ProductInstallerImpl.java:57)&#xA;    at com.mathworks.install.InstallerImpl.install(InstallerImpl.java:100)&#xA;    at com.mathworks.installwizard.model.InstallTask.execute(InstallTask.java:46)&#xA;    at com.mathworks.installwizard.model.AbstractBackgroundTask.execute(AbstractBackgroundTask.java:38)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:73)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:23)&#xA;    at com.mathworks.wizard.worker.WorkerImpl.doInBackground(WorkerImpl.java:24)&#xA;    at javax.swing.SwingWorker$1.call(Unknown Source)&#xA;    at java.util.concurrent.FutureTask.run(Unknown Source)&#xA;    at javax.swing.SwingWorker.run(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)&#xA;    at java.lang.Thread.run(Unknown Source)&#xA;&#xA;(Nov 30, 2016 13:20:52) Error: The application encountered an unexpected error and needs to close.  You may want to try re-installing your product(s).  More information can be found at /tmp/mathworks_root.log&#xA;(Nov 30, 2016 13:20:59) Exiting with status -1&#xA;(Nov 30, 2016 13:21:00) End - Unsuccessful.&#xA;(Nov 30, 2016 13:21:17) ##################################################################&#xA;(Nov 30, 2016 13:21:17) #&#xA;(Nov 30, 2016 13:21:17) # Today's Date: &#xA;(Nov 30, 2016 13:21:17) Wed Nov 30 13:21:17 BRST 2016&#xA;(Nov 30, 2016 13:21:17) &#xA;(Nov 30, 2016 13:21:17) System Info&#xA;(Nov 30, 2016 13:21:17) OS: Linux 4.4.0-47-generic&#xA;(Nov 30, 2016 13:21:17) Arch: amd64&#xA;(Nov 30, 2016 13:21:17) Data Model: 64&#xA;(Nov 30, 2016 13:21:17) Language: pt&#xA;(Nov 30, 2016 13:21:17) Java Vendor: Oracle Corporation&#xA;(Nov 30, 2016 13:21:17) Java Home: /tmp/mathworks_8650/sys/java/jre/glnxa64/jre&#xA;(Nov 30, 2016 13:21:17) Java Version: 1.7.0_60&#xA;(Nov 30, 2016 13:21:17) Java VM Name: Java HotSpot(TM) 64-Bit Server VM&#xA;(Nov 30, 2016 13:21:17) Java Class Path: .&#xA;(Nov 30, 2016 13:21:17) User Name: root&#xA;(Nov 30, 2016 13:21:17) Current Directory: /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:21:17) Input arguments: &#xA;(Nov 30, 2016 13:21:17) root /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:21:17) libdir /tmp/mathworks_8650&#xA;(Nov 30, 2016 13:21:17) standalone true&#xA;(Nov 30, 2016 13:21:19) Starting local product/component search in download directory&#xA;(Nov 30, 2016 13:21:19) Searching for archives...&#xA;(Nov 30, 2016 13:21:19) Reading /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:21:19) 4353 files found in /home/franciscone/MatlaLinux/Matlab/archives&#xA;(Nov 30, 2016 13:21:19) Reading /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:21:19) 15 files found in /home/franciscone/MatlaLinux/Matlab&#xA;(Nov 30, 2016 13:21:19) /root/Downloads/MathWorks/R2015a/archives doesn't exist ... skipping.&#xA;(Nov 30, 2016 13:21:19) Archive search complete.  4368 total files found.&#xA;(Nov 30, 2016 13:21:27) Completed local product/component search&#xA;(Nov 30, 2016 13:21:33) Default Installation Folder: /usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;(Nov 30, 2016 13:21:40) Confirmation Text: &#xA;Installation folder:&#xA;/usr/local/MATLAB/MATLAB_Production_Server/R2015a&#xA;&#xA;Installation Size: 10.328 MB&#xA;&#xA;Products:&#xA;MATLAB Distributed Computing Server 6.6&#xA;MATLAB 8.5&#xA;Simulink 8.5&#xA;Aerospace Blockset 3.15&#xA;Aerospace Toolbox 2.15&#xA;Antenna Toolbox 1.0&#xA;Bioinformatics Toolbox 4.5.1&#xA;Communications System Toolbox 6.0&#xA;Computer Vision System Toolbox 6.2&#xA;Control System Toolbox 9.9&#xA;Curve Fitting Toolbox 3.5.1&#xA;Database Toolbox 5.2.1&#xA;Datafeed Toolbox 5.1&#xA;DO Qualification Kit 2.5&#xA;DSP System Toolbox 9.0&#xA;Econometrics Toolbox 3.2&#xA;Embedded Coder 6.8&#xA;Filter Design HDL Coder 2.9.7&#xA;Financial Instruments Toolbox 2.1&#xA;Financial Toolbox 5.5&#xA;Fixed-Point Designer 5.0&#xA;Fuzzy Logic Toolbox 2.2.21&#xA;Global Optimization Toolbox 3.3.1&#xA;HDL Coder 3.6&#xA;HDL Verifier 4.6&#xA;IEC Certification Kit 3.5&#xA;Image Acquisition Toolbox 4.9&#xA;Image Processing Toolbox 9.2&#xA;Instrument Control Toolbox 3.7&#xA;LTE System Toolbox 2.0&#xA;Mapping Toolbox 4.1&#xA;MATLAB Coder 2.8&#xA;MATLAB Compiler 6.0&#xA;MATLAB Compiler SDK 6.0&#xA;MATLAB Production Server 2.1&#xA;MATLAB Report Generator 4.1&#xA;Model Predictive Control Toolbox 5.0.1&#xA;Neural Network Toolbox 8.3&#xA;Optimization Toolbox 7.2&#xA;Parallel Computing Toolbox 6.6&#xA;Partial Differential Equation Toolbox 2.0&#xA;Phased Array System Toolbox 3.0&#xA;Polyspace Bug Finder 1.3&#xA;Polyspace Code Prover 9.3&#xA;RF Toolbox 2.16&#xA;Robotics System Toolbox 1.0&#xA;Robust Control Toolbox 5.3&#xA;Signal Processing Toolbox 7.0&#xA;SimBiology 5.2&#xA;SimDriveline 2.8&#xA;SimElectronics 2.7&#xA;SimEvents 4.4&#xA;SimHydraulics 1.16&#xA;SimMechanics 4.6&#xA;SimPowerSystems 6.3&#xA;SimRF 4.4&#xA;Simscape 3.13&#xA;Simulink 3D Animation 7.3&#xA;Simulink Code Inspector 2.3&#xA;Simulink Coder 8.8&#xA;Simulink Control Design 4.2&#xA;Simulink Design Optimization 2.7&#xA;Simulink Design Verifier 2.8&#xA;Simulink Report Generator 4.1&#xA;Simulink Test 1.0&#xA;Simulink Verification and Validation 3.9&#xA;Stateflow 8.5&#xA;Statistics and Machine Learning Toolbox 10.0&#xA;Symbolic Math Toolbox 6.2&#xA;System Identification Toolbox 9.2&#xA;SystemTest 2.6.9&#xA;Vision HDL Toolbox 1.0&#xA;Wavelet Toolbox 4.14.1&#xA;&#xA;(Nov 30, 2016 13:21:41) java.lang.NullPointerException&#xA;    at com.mathworks.install.ComponentSizeAggregator.add(ComponentSizeAggregator.java:13)&#xA;    at com.mathworks.install.ProductInstallerImpl.downloadProducts(ProductInstallerImpl.java:96)&#xA;    at com.mathworks.install.ProductInstallerImpl.installProducts(ProductInstallerImpl.java:57)&#xA;    at com.mathworks.install.InstallerImpl.install(InstallerImpl.java:100)&#xA;    at com.mathworks.installwizard.model.InstallTask.execute(InstallTask.java:46)&#xA;    at com.mathworks.installwizard.model.AbstractBackgroundTask.execute(AbstractBackgroundTask.java:38)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:73)&#xA;    at com.mathworks.installwizard.model.AbstractTask.call(AbstractTask.java:23)&#xA;    at com.mathworks.wizard.worker.WorkerImpl.doInBackground(WorkerImpl.java:24)&#xA;    at javax.swing.SwingWorker$1.call(Unknown Source)&#xA;    at java.util.concurrent.FutureTask.run(Unknown Source)&#xA;    at javax.swing.SwingWorker.run(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source)&#xA;    at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)&#xA;    at java.lang.Thread.run(Unknown Source)&#xA;&#xA;(Nov 30, 2016 13:21:41) Error: The application encountered an unexpected error and needs to close.  You may want to try re-installing your product(s).  More information can be found at /tmp/mathworks_root.log&#xA;(Nov 30, 2016 13:21:44) Exiting with status -1&#xA;(Nov 30, 2016 13:21:45) End - Unsuccessful.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6242" LastEditorUserId="308" LastEditDate="2018-08-07T17:04:49.807" LastActivityDate="2018-08-07T17:04:49.807" Title="Trouble installing MatLab R2015A on elementary OS" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9476" PostTypeId="2" ParentId="9475" CreationDate="2016-11-30T17:27:51.450" Score="2" Body="&lt;p&gt;It sounds like you need a newer version of MatLab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS Loki is based on Ubuntu 16.04, which is not supported by MatLab R2015A. According to the &lt;a href=&quot;https://www.mathworks.com/support/sysreq/current_release/index.html?sec=linux&amp;amp;s_tid=gn_loc_drop&quot; rel=&quot;nofollow noreferrer&quot;&gt;MatLab System Requirements&lt;/a&gt;, &quot;Ubuntu 16.04 is supported as of R2016b.&quot;&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-11-30T17:27:51.450" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9477" PostTypeId="1" AcceptedAnswerId="9478" CreationDate="2016-11-30T19:29:02.410" Score="1" ViewCount="1045" Body="&lt;p&gt;Currently I'm using Freya (host) and I've installed the PHPMyAdmin. &#xA;I have a Windows 7 that installed in Virtualbox and I want to connect from Windows 7 (the guest) to PHPMyAdmin that installed in Freya (the host). &#xA;Any clue? Thanks before.. &lt;/p&gt;&#xA;" OwnerUserId="7499" LastActivityDate="2016-11-30T21:22:41.330" Title="Connect to PHPMyAdmin from guest (Windows)" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9478" PostTypeId="2" ParentId="9477" CreationDate="2016-11-30T21:22:41.330" Score="0" Body="&lt;p&gt;Enable ONE network adapter. Set it to NAT and start your machine. Don't need to configure anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On guest machine's browser type &lt;a href=&quot;http://10.0.2.2&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://10.0.2.2&lt;/a&gt; which will show you the same content as &quot;localhost&quot; in the host OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;10.0.2.2 is the &quot;default gateway&quot; for NAT connections and your guest OS' IP is 10.0.2.15&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course you can set a &quot;HOST-ONLY&quot; or an &quot;Internal Network&quot; which will allow you another advanced configurations. (The original author at superuser.com recommends to stay with NAT)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(source : &lt;a href=&quot;https://superuser.com/questions/144453/virtualbox-guest-os-accessing-local-server-on-host-os&quot;&gt;https://superuser.com/questions/144453/virtualbox-guest-os-accessing-local-server-on-host-os&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2016-11-30T21:22:41.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9479" PostTypeId="2" ParentId="9472" CreationDate="2016-11-30T21:41:02.573" Score="1" Body="&lt;p&gt;Actually if I understand correctly, you have the Trash docklet on your Plank. This is not the same as the other application icons on Plank. So actually the expected behavior is not to minimize on the second click, but to open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can put a shortcut to your Trash to Plank (as a folder shortcut) it might work indeed as you expect it.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-11-30T21:41:02.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9480" PostTypeId="2" ParentId="9464" CreationDate="2016-11-30T22:38:29.300" Score="3" Body="&lt;p&gt;The way to download and pay with Paypal or just donate money to help is at the moment (November, 30, 2016):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow&quot;&gt;https://elementary.io&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;If you want to download elementary OS and pay by PayPal:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;STEP 1)&lt;/strong&gt; &#xA;Download the OS typing &lt;code&gt;0&lt;/code&gt; in the &lt;em&gt;&quot;Custom&quot;&lt;/em&gt; section; afterwards press &lt;em&gt;&quot;Purchase elementary OS&quot;&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;STEP 2)&lt;/strong&gt;&#xA;Click the &lt;em&gt;&quot;Get Involved&quot;&lt;/em&gt; section located at the upper right position of your screen. Once there you will see different options to help elementary OS. After the &lt;em&gt;&quot;General Funding&quot;&lt;/em&gt; section you have Paypal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;If you don't need to download and just want to donate skip &lt;strong&gt;STEP 1&lt;/strong&gt;.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope elementary team will include Paypal in the Download area besides Card and Bitcoin as lots of users employ this payment method.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2016-11-30T22:56:32.557" LastActivityDate="2016-11-30T22:56:32.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9481" PostTypeId="1" CreationDate="2016-11-30T23:49:44.787" Score="0" ViewCount="463" Body="&lt;p&gt;E: Unable to correct problems, you have held broken packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this happens with all packages that have dependencies. My system is blocked. I can't install anything. Doesn't matter which package.&#xA;sudo apt-get update goes perfect no errors whatsoever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried most solutions offered in forums.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get clean &amp;amp;&amp;amp; sudo apt-get update, sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade, Sudo apt-get -f install, sudo apt-get -f remove,&#xA;sudo apt-get --fix-broken install, sudo apt-get clean, sudo apt-get autoclean, sudo apt-get autoremove,sudo dpkg --configure -a, sudo apt-get update,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;etc... etc.... etc....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tried to bypass it by &quot;aptitude&quot; &#xA;and a lot more&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked hold packages, tried synaptic.edit=&gt; fix broken packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Synaptic can't find anything broken. Also apt-get update ends clean.??&#xA;But every attempt to install a package with apt-get install or aptitude, where a dependency is needed, i get &quot;...is needed but it is not going to be installed&quot; and &quot;Unable to correct problems, you have held broken packages.&quot; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If synaptic doesn't find anything and ap-get update runs ok,&#xA;Where is that broken package? &#xA;This silly thing,blocks all possibility to install anything. Even when I remove an installed package and remove the dependencies, and try to reinstall it again, i get the error.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was happy with my installation. I don't want to reinstall the os.&#xA;Help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lemonslice, Thanks for your response. I tried to add it in the text field but it became a mess. I created a txt file. Find the info you requested here in this linked file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://s000.tinyupload.com/?file_id=37210698229127944268&quot; rel=&quot;nofollow noreferrer&quot;&gt;link to file&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7603" LastEditorUserId="7603" LastEditDate="2016-12-01T13:33:27.630" LastActivityDate="2018-08-26T00:31:34.610" Title="freya can't install anything by apt-get install" Tags="|release-freya|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9482" PostTypeId="2" ParentId="9470" CreationDate="2016-12-01T00:01:47.133" Score="-2" Body="&lt;p&gt;I wish I had a full answer, but I had asked this very same question before, and it doesn't show up in the question list when I'm not signed in, so I don't know if it was just 'dismissed', or what.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I DO know, is that when I run the appcenter in terminal, then I type two characters into the search bar, the app crashes because of a &quot;Segmentation fault&quot;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;joe@HP-G62:~$ appcenter&#xA;[INFO 18:53:31.544223] Application.vala:155: App Center version: 0.1.2&#xA;[INFO 18:53:31.544336] Application.vala:157: Kernel version: 4.4.0-47-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is what happens when I input two characters:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[FATAL 18:53:40.229094] Client.vala:241: The package id's '' are not  valid&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I also found is that if I type in 3 or more characters before it has the chance to crash, it works just fine. What this tells me is that it isn't the &lt;em&gt;search function&lt;/em&gt; that has the bug, but rather the handling of the first two characters that are put into the search bar. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point, I hope a developer comes across this post and knows exactly where to look from here. &lt;/p&gt;&#xA;" OwnerUserId="7571" LastActivityDate="2016-12-01T00:01:47.133" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9483" PostTypeId="1" CreationDate="2016-12-01T04:08:46.363" Score="0" ViewCount="90" Body="&lt;p&gt;I can't install vnc viewer for remote control on new elementary loki install. error message can't find file after following instructions from google search&lt;/p&gt;&#xA;" OwnerUserId="7605" LastActivityDate="2016-12-01T21:58:08.420" Title="Applications installation" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9485" PostTypeId="2" ParentId="2097" CreationDate="2016-12-01T09:40:20.520" Score="0" Body="&lt;p&gt;But as far as I know you have to add each individual calender separately.&#xA;In OwnCloud / NextCloud each individual calendar has a link button, maybe behind a submenu (3 dots). The link that appears is the link you use as URL. Then when you also include the correct username and press Create calendar it should ask for your password. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm sure I've read this on a OwnCloud page somewhere, but couldn't find it anymore. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2016-12-01T09:40:20.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9486" PostTypeId="1" AcceptedAnswerId="9569" CreationDate="2016-12-01T09:47:39.757" Score="4" ViewCount="163" Body="&lt;p&gt;The blog post &lt;a href=&quot;http://blog.elementary.io/post/147637979911/loki-04-stable-release&quot; rel=&quot;nofollow noreferrer&quot;&gt;Loki 0.4 Stable Release!&lt;/a&gt; mentions: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Calendar in Loki introduces natural language creation for events. For&#xA;  example, type “Meeting with Dan tomorrow at 8 at Starbucks” and&#xA;  Calendar will pre-fill the event title, participant, date, time, and&#xA;  location tabs with the relevant information.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;But I haven't been able to find where I can type this. Slingshot simply indicates &quot;No results&quot;, there doesn't seem to be a new field or button in the Calender app itself and there is no button for this in the Calendar Wingpanel integration . &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Using Elementary OS 0.4 Loki.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="45" LastEditDate="2016-12-06T18:26:53.313" LastActivityDate="2016-12-07T18:57:56.587" Title="How can I create an event with natural language parsing in Calendar?" Tags="|release-loki|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9487" PostTypeId="2" ParentId="9470" CreationDate="2016-12-01T11:46:42.063" Score="-1" Body="&lt;p&gt;Try: &lt;code&gt;sudo apt install synaptic&lt;/code&gt;&#xA;Open synaptic and update.&lt;/p&gt;&#xA;" OwnerUserId="7595" LastEditorUserId="26" LastEditDate="2016-12-09T10:53:20.410" LastActivityDate="2016-12-09T10:53:20.410" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9488" PostTypeId="2" ParentId="5473" CreationDate="2016-12-01T13:42:49.683" Score="1" Body="&lt;p&gt;If that feature were in place it would be coming from some panel applet or Pantheon Files. I cannot find an option for Pantheon Files to do that  but I stumbled upon exactly what is asked here after installing the very light &lt;strong&gt;PCManFM File Manager&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pcmanfm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It has the option enabled by default&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aooaf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aooaf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qEdLo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qEdLo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mMR9m.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mMR9m.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last used application will appear first next time. In order to &lt;a href=&quot;https://unix.stackexchange.com/q/327354/32012&quot;&gt;edit the list which appears there&lt;/a&gt; - namely to add an application that is not there already: edit &lt;code&gt;~/.config/mimeapps.list&lt;/code&gt; by adding under the section &lt;code&gt;[Added Associations]&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for the &quot;play cd&quot; list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;x-content/audio-cdda=name_of_application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for the &quot;play dvd&quot; list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;x-content/video-dvd=name_of_application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;log-out and in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file manager needs to be open for that window to open automatically. To have PCManFM open but hidden (as deamon) at startup add this command to  &lt;em&gt;Settings - Applications - Startup&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pcmanfm -d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QpcMw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QpcMw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;An alternative to pop-up windows upon insertion of removal media is to add to the dock some options to run your preferred commands on that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, if you have VLC added to the dock as a launcher you can add some desktop actions to that launcher (supplementary options accessible as a list on right-click), like &quot;Play DVD&quot;, &quot;Play CD&quot;, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An example on VLC:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /usr/share/applications/vlc.desktop  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, add to the end of that file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Actions=vlc-dvd;vlc-cd;eject&#xA;&#xA;[Desktop Action vlc-dvd]&#xA;Icon=VLC-DVD&#xA;Name=Play DVD&#xA;Exec=vlc dvd://&#xA;&#xA;[Desktop Action vlc-cd]&#xA;Name=Play CD&#xA;Exec=vlc cdda://&#xA;Icon=CD&#xA;&#xA;[Desktop Action eject]&#xA;Name=Eject disk&#xA;Exec=eject&#xA;Icon=eject&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Icon=&lt;/code&gt; lines correspond to names of png file that I had put in &lt;code&gt;~/.local/share/icons&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i8CQQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i8CQQ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More on desktop actions, &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9424/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command of playing cd is normally &lt;code&gt;program_name cdda://&lt;/code&gt;. (If you prefer Deadbeef player, you will have to use &lt;code&gt;deadbeef all.cda&lt;/code&gt;.)&#xA;For playing dvds: &lt;code&gt;program_name dvd://&lt;/code&gt; (for example &lt;code&gt;mpv dvd://&lt;/code&gt;).&#xA;To rip a cd with this method, Asunder doesn't seem to take arguments, but Sound Juicer can automatically start ripping with &lt;code&gt;sound-juicer -a&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of desktop actions (lines added to existing desktop files) one can create and add to the dock new desktop launchers, for example, to start dvd in mpv player:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/mpv-dvd.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With this content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Categories=AudioVideo;Audio;Video;Player;TV;&#xA;Exec=mpv dvd://&#xA;Icon=mpv-dvd&#xA;MimeType=audio/*;video/*&#xA;Name=Play DVD in mpv Media Player&#xA;StartupNotify=true&#xA;Terminal=false&#xA;Type=Application&#xA;Actions=Eject&#xA;&#xA;[Desktop Action Eject]&#xA;Name=Eject disk&#xA;Exec=eject&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course, these desktop launchers are then accessible from Applications launcher &lt;kbd&gt;Super&lt;/kbd&gt; - &lt;kbd&gt;Space&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-05T17:30:55.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9490" PostTypeId="2" ParentId="9467" CreationDate="2016-12-01T14:20:01.503" Score="2" Body="&lt;p&gt;(0.4 loki) Pantheon tabs display the path (current working directory) and the last command (being) executed. You can change the directory or execute a command to change them but tabs cannot actually be named.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-01T14:20:01.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9491" PostTypeId="2" ParentId="9391" CreationDate="2016-12-01T14:47:06.480" Score="1" Body="&lt;p&gt;I managed to solve the problem by disabling the USB 3.0 support in the notebook's BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: This also made the &quot;quite splash&quot; edit obsolete.&lt;/p&gt;&#xA;" OwnerUserId="7520" LastActivityDate="2016-12-01T14:47:06.480" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9492" PostTypeId="2" ParentId="6907" CreationDate="2016-12-01T14:53:26.907" Score="0" Body="&lt;p&gt;Бред. Всё прекрасно ставится. Нужно только отключить &quot;Безопасную загрузку&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZePhb.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZePhb.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7611" LastActivityDate="2016-12-01T14:53:26.907" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9493" PostTypeId="1" CreationDate="2016-12-01T15:25:01.843" Score="0" ViewCount="751" Body="&lt;p&gt;I am testing Elementary OS loki, I find it very interesting, but note that I can not create any file on the desktop which seems to me to be wasting a lot of resources in terms of organization, well I use the desktop a lot, that's why I'd like to know if There is some configuration that I must change to be able to enable the desktop, I would greatly appreciate your support. regards&lt;/p&gt;&#xA;" OwnerUserId="7590" LastActivityDate="2016-12-02T15:05:18.463" Title="Can I enable the desktop to create files, folders and shortcuts? In loki" Tags="|release-loki|desktop|" AnswerCount="1" CommentCount="4" ClosedDate="2016-12-06T18:18:19.567" ContentLicense="CC BY-SA 3.0" />
  <row Id="9494" PostTypeId="1" AcceptedAnswerId="9495" CreationDate="2016-12-01T15:48:49.947" Score="1" ViewCount="2635" Body="&lt;p&gt;I want to be able to enable (or even better enable and disable at will) image previews (thumbnails) in Pantheon Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i78PB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i78PB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In dconf Editor in org-gnome-desktop-thumbnailers nothing is desabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PCManFM and Thunar both have them.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2018-02-13T23:08:43.357" Title="Enable image previews in Loki file manager" Tags="|release-loki|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9495" PostTypeId="2" ParentId="9494" CreationDate="2016-12-01T18:24:23.647" Score="2" Body="&lt;p&gt;&lt;code&gt;sudo scratch-text-editor /etc/xdg/tumbler/tumbler.rc&lt;/code&gt; &lt;br&gt;&#xA;At the line # Jpeg thumbnailer, set &lt;code&gt;Disabled=false&lt;/code&gt; or &lt;code&gt;Disabled=true&lt;/code&gt; to enable or disable jpeg thumbnails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable for png and other image formats, under the line # PixbufThumbnailer in the same file, set &lt;code&gt;Disabled=false&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorDisplayName="user170" LastEditDate="2016-12-28T11:28:58.530" LastActivityDate="2016-12-28T11:28:58.530" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9497" PostTypeId="2" ParentId="6907" CreationDate="2016-12-01T18:54:54.133" Score="4" Body="&lt;p&gt;Yes it can work with gen 2. Before starting VM go into settings -&gt; security. Disable secure boot and save it. Start your VM and go install. &lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2016-12-01T18:54:54.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9498" PostTypeId="1" CreationDate="2016-12-01T20:46:50.950" Score="9" ViewCount="17357" Body="&lt;p&gt;I can't seem to add any applications.  I receive a notice saying &quot;Waiting for package manager lock&quot;.   I like Elementary but I am stuck and unable to install any additional programs.  Should I do a clean install of Elementary....ie start again from scratch?&lt;/p&gt;&#xA;" OwnerUserId="3301" LastActivityDate="2019-02-24T10:33:43.173" Title="Waiting for package manager lock what does that mean?" Tags="|software-installation|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9499" PostTypeId="2" ParentId="9498" CreationDate="2016-12-01T20:50:52.407" Score="3" Body="&lt;p&gt;That's probably because some other program is using apt or you aren't running it with sudo. Just reboot and then do &lt;code&gt;sudo apt install [program]&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2019-02-24T10:33:43.173" LastActivityDate="2019-02-24T10:33:43.173" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="9500" PostTypeId="2" ParentId="9483" CreationDate="2016-12-01T21:58:08.420" Score="1" Body="&lt;p&gt;you can open a terminal window and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install vncviewer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, the package manager will swap it for xtightvncviewer. Haven't used it in about a month, but it's worked well enough for me. Just make sure you have openbox installed on whatever you VNC into. &lt;/p&gt;&#xA;" OwnerUserId="7571" LastActivityDate="2016-12-01T21:58:08.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9502" PostTypeId="1" AcceptedAnswerId="9542" CreationDate="2016-12-02T07:58:59.963" Score="1" ViewCount="5386" Body="&lt;p&gt;After installing the system updates via AppCenter the speakers do not sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1608/7495&quot;&gt;this&lt;/a&gt; solution is not valid today.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any chance to overcome this issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because of I'd tried it before and realized that the system updates cause some problem on my laptop, after fresh Elementary OS installing, I use my laptop 3 days without any issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I got the system updates again. Now the speakers do not sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And only &lt;code&gt;Dummy Output&lt;/code&gt; seems on the sound settings page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to overcome this issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; My soundcard manufacturer is Realtek. But I cannot find model number on Elementary OS or BIOS screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DylBP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DylBP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-05-19T00:40:29.873" Title="Sound issue after system update" Tags="|release-loki|updates|system|sound|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9503" PostTypeId="1" CreationDate="2016-12-02T09:28:52.200" Score="2" ViewCount="229" Body="&lt;p&gt;When I run appcenter and type two letters into the search bar the application crashes with the following error.&#xA;The same error (without the 3rd line) occurs when I click in &lt;strong&gt;specific&lt;/strong&gt; categories.&#xA;For example it crashes on Internet but not in Graphics category.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 09:11:19.229139] Application.vala:155: App Center version: 0.1.2&#xA;[INFO 09:11:19.229221] Application.vala:157: Kernel version: 4.4.0-51-generic&#xA;[FATAL 09:11:24.781323] Client.vala:241: The package id's '' are not valid&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This bug is also covering in other posts which I am trying to merge here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9470/app-center-is-crashing&quot;&gt;App Center is crashing&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9437/app-center-crashes-when-typing-into-search-bar&quot;&gt;App center crashes when typing into search bar&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;edit: &#xA;This is a confirmed bug (#1646164) you can view bellow the bug report.&#xA;So I suppose we are just waiting for the fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1646164&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug Report here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7625" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-05T18:45:22.473" Title="App Center crashing when typing on search and on specific categories click" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ClosedDate="2016-12-05T19:53:50.200" ContentLicense="CC BY-SA 3.0" />
  <row Id="9504" PostTypeId="1" CreationDate="2016-12-02T09:55:11.197" Score="1" ViewCount="42" Body="&lt;p&gt;I have problems with getting rid of nautilus handling my desktop. I do not want to use it and my wallpapers look ugly because of it. It looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/rcCgZ.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you help me with it? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="7626" LastEditorUserId="84" LastEditDate="2018-05-06T18:35:07.167" LastActivityDate="2020-05-19T12:01:45.157" Title="I have problems with getting rid of nautilus handling my desktop" Tags="|wallpaper|nautilus|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9505" PostTypeId="2" ParentId="9494" CreationDate="2016-12-02T09:59:04.403" Score="0" Body="&lt;p&gt;If tumbler is enabled then you should get thumbnails when viewing local folders (try pressing refresh if not - if still not then try restarting the tumblerd process using gnome-system-monitor or the commandline).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a dconf setting that turns on thumbnailing of remote folders.  If you have a recent version then right clicking on a remote folder background should give you a option to turn this on or off.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-12-02T09:59:04.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9506" PostTypeId="2" ParentId="9504" CreationDate="2016-12-02T10:01:59.683" Score="1" Body="&lt;p&gt;I found my answer, I used this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.nemo.desktop show-desktop-icons false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7626" LastEditorUserId="578" LastEditDate="2016-12-02T13:33:23.377" LastActivityDate="2016-12-02T13:33:23.377" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9507" PostTypeId="1" AcceptedAnswerId="9510" CreationDate="2016-12-02T10:29:29.203" Score="1" ViewCount="355" Body="&lt;p&gt;When I turning UFW on, it blocks the all ports and a log is occurred about this action:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;whoopsie[607]: [11:39:36] Cannot reach: https://daisy.ubuntu.com&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu help page says that:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Ubuntu error tracker submission This program submits crash reports to&#xA;  an Ubuntu server. It makes a DNS query for daisy.ubuntu.com on every&#xA;  boot. To disable: &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;(Warning: Ubuntu will lose ability to report bugs) &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Click the icon at the far right of the menu bar and select System&#xA;  Settings.  Open Security &amp;amp; Privacy and select the Diagnostics tab. &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Switch off &quot;Send error reports to Canonical&quot;.  Log out and log back in&#xA;  for the change to take effect.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So I wonder how can I switch off &quot;Send error reports to Canonical&quot; option on Elementary OS Loki?&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2016-12-02T14:51:22.847" Title="How to close error reporting to Ubuntu" Tags="|release-loki|settings|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9508" PostTypeId="2" ParentId="9166" CreationDate="2016-12-02T14:07:50.540" Score="1" Body="&lt;p&gt;I ended up re-installing eOS and rebuilding my system. I did so carefully and found out what had caused the verbose boot. It started when I installed the Nvidia binary driver v340.98. Having switched back to the Nouveau driver the verbose boot stopped and I was back to the eOS logo and a silent boot.&lt;/p&gt;&#xA;" OwnerUserId="7295" LastActivityDate="2016-12-02T14:07:50.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9510" PostTypeId="2" ParentId="9507" CreationDate="2016-12-02T14:51:22.847" Score="1" Body="&lt;p&gt;You can remove whoopsie (from the command line):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge whoopsie&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-02T14:51:22.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9511" PostTypeId="2" ParentId="9493" CreationDate="2016-12-02T15:05:18.463" Score="0" Body="&lt;p&gt;I found a video that explains how to do it, I share it in case someone has the same doubt. &lt;a href=&quot;https://www.youtube.com/watch?v=qa3w2bDCM0A&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=qa3w2bDCM0A&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7590" LastActivityDate="2016-12-02T15:05:18.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9512" PostTypeId="1" CreationDate="2016-12-02T18:02:48.110" Score="1" ViewCount="20" Body="&lt;p&gt;I have been looking for answers but yet not luck. I have installed Loki on a Dell XPS 13, everything seems to work but the media keys, and shortcuts. I am running single elementary OS Loki &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS. sorry for the grammar errors. the keyboard does not help either. ;) &lt;/p&gt;&#xA;" OwnerUserId="7631" LastEditorUserId="308" LastEditDate="2018-08-07T18:20:54.967" LastActivityDate="2018-08-07T18:20:54.967" Title="Dell 13 xps media keys are dead" Tags="|multimedia|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-02T18:37:20.233" ContentLicense="CC BY-SA 4.0" />
  <row Id="9513" PostTypeId="1" CreationDate="2016-12-02T18:56:52.103" Score="1" ViewCount="6892" Body="&lt;p&gt;I installed Pot Player using Wine in Elementary OS 0.4 Loki, it didn't work so I uninstalled it. The icon was still in the applications list, so I removed Wine thinking that it might help, I followed &lt;a href=&quot;http://sourcedigit.com/10018-completely-uninstallremove-wine-ubuntu-14-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this forum&lt;/a&gt;. After that I could hear no sound, no sound at all, no sound in vlc, videos and other players and no notification sounds at all.  I can't even hear any sound in sound test, even in bluetooth speakers or headphones. How to get it back? I'm running Elementary OS Loki. &lt;/p&gt;&#xA;" OwnerUserId="7632" LastActivityDate="2024-01-04T03:03:00.333" Title="No sound at all in elementary OS Loki" Tags="|sound|ubuntu|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9514" PostTypeId="2" ParentId="9470" CreationDate="2016-12-02T23:28:15.520" Score="0" Body="&lt;p&gt;True, it starts happening after installing some input update. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure you restart and run update again . It will fix itself&lt;/p&gt;&#xA;" OwnerUserId="7633" LastActivityDate="2016-12-02T23:28:15.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9515" PostTypeId="2" ParentId="9502" CreationDate="2016-12-03T10:02:47.280" Score="0" Body="&lt;p&gt;Today my speakers are working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I had experienced that sometimes there is no sound at all. Sometimes the sound comes from only left speaker.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And sometimes everything is OK like the picture below which is happened today. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So actually my issue is continueing because it works unstable for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hkfVU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hkfVU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2016-12-03T10:02:47.280" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9516" PostTypeId="2" ParentId="9388" CreationDate="2016-12-03T17:24:00.110" Score="1" Body="&lt;p&gt;It says here : &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9251/wingpanel-suddenly-disappeared/9254#9254&quot;&gt;Wingpanel Suddenly Disappeared&lt;/a&gt;&#xA;That you have to delete your desktop configuration with a command. I couldn't make it work so I just went to .config and deleted gdk stuff that I could find.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways, it didn't work for me. I am still searching. I did try to remove elementary tweaks but it didn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope I won't waste anymore time on this thing.&lt;/p&gt;&#xA;" OwnerUserId="7637" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-03T17:24:00.110" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9517" PostTypeId="1" AcceptedAnswerId="9534" CreationDate="2016-12-03T17:40:02.440" Score="1" ViewCount="153" Body="&lt;p&gt;So I came across this issue when I installed a recent application (Packet Tracer7.0 [CISCO]). When I run it trew the sh file on it's folder it works properly well and shows the respective icon on the dock. So far so good, but when I go to my slingshot I found it curious that no icon (or desktop entry) was added there and because of this I believe I can't do the action &quot;Add to dock&quot;. More interesting was going on to the /usr/share/application folder and finding that many desktop entries not only for this especific app are there but don't show up in the slingshot menu. Any sugestions?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Exec=PacketTracer7&#xA;Icon=pt7&#xA;Type=Application&#xA;Terminal=false&#xA;Name=Packet Tracer 7.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7639" LastEditorUserId="7639" LastEditDate="2016-12-04T19:04:30.723" LastActivityDate="2016-12-04T20:08:46.193" Title="Slingshot Issue" Tags="|release-loki|slingshot|app-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9518" PostTypeId="2" ParentId="2860" CreationDate="2016-12-03T18:53:22.543" Score="5" Body="&lt;p&gt;The key has been changed in Newer version of Wingpanel like version 2.0.1. Use this instead&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.wingpanel use-transparency true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to reset, use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.desktop.wingpanel use-transparency&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5054" LastActivityDate="2016-12-03T18:53:22.543" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9519" PostTypeId="1" CreationDate="2016-12-03T19:05:32.357" Score="1" ViewCount="884" Body="&lt;p&gt;I have a late 2006 intel imac running osx lion (10.75) off an external usb drive (the internal drive is dead). I have followed the instructions to create a bootable usb drive with etch but it is not recognized on startup. I then reverted to plan b as suggested in the mac installation instructions and burned the iso to a dvd. This was not recognized either. My computer does not have enough free resources to use a virtual machine. Note, I am not trying to dual boot. I want to erase my hard drive and replace osx with Elementary OS. Does anyone have any suggestions? Thanks! &lt;/p&gt;&#xA;" OwnerUserId="7642" LastActivityDate="2017-02-15T08:51:24.413" Title="Cannot install on late 2006 intel imac" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9521" PostTypeId="1" CreationDate="2016-12-04T01:32:05.903" Score="1" ViewCount="148" Body="&lt;p&gt;I have installed Wallch wallpaper changerin Loki. Used it on Luna but in Loki It appears to be running but the desktop background remains.So how to turn off the default wallpaper and allow wallch to show? I have Loki running, very nice, and really want my wallpaper slideshow. Any help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="7644" LastEditorUserId="45" LastEditDate="2016-12-06T18:20:05.687" LastActivityDate="2016-12-06T18:20:05.687" Title="Can't make Wallch (wallpaper changer) show up in Loki, even though it's running" Tags="|applications|desktop|wallpaper|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9522" PostTypeId="1" CreationDate="2016-12-04T03:18:15.717" Score="0" ViewCount="330" Body="&lt;p&gt;Brand new install of Loki. When Software Center is clicked, the icon shows up on the dock for about 10 seconds and then goes away. nothing else happens. I reinstalled the SC but no change. I noticed during the reinstall many messages that packages could not be found. How to fix this?&lt;/p&gt;&#xA;" OwnerUserId="7644" LastActivityDate="2016-12-04T07:24:32.767" Title="Software Center won't run in Loki" Tags="|updates|" AnswerCount="1" CommentCount="1" ClosedDate="2016-12-06T18:27:16.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="9523" PostTypeId="2" ParentId="9428" CreationDate="2016-12-04T04:22:15.777" Score="1" Body="&lt;p&gt;Finally found the answer. For anybody looking.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/users/22/rafael&quot;&gt;rafael's&lt;/a&gt; answer on the question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/33/how-can-i-change-the-skype-icon-in-the-wingpanel-to-match-the-default-style&quot;&gt;change skype icon wingpanel&lt;/a&gt;.&#xA;Install elementary+. It works for megasync. :)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cybre/elementaryplus&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;sudo apt-get install elementaryplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-04T04:22:15.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9524" PostTypeId="1" AcceptedAnswerId="9553" CreationDate="2016-12-04T06:34:21.290" Score="0" ViewCount="120" Body="&lt;p&gt;I read somewhere that it resolves the forward, backward problem. Is there a way without breaking the system?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="5831" LastEditDate="2016-12-04T07:40:38.063" LastActivityDate="2016-12-05T21:44:32.580" Title="How can I install the latest Pantheon-files(0.3.xx) from (0.2.4) in Freya?" Tags="|release-freya|pantheon-files|" AnswerCount="2" CommentCount="0" ClosedDate="2016-12-06T18:16:56.017" ContentLicense="CC BY-SA 3.0" />
  <row Id="9525" PostTypeId="2" ParentId="9522" CreationDate="2016-12-04T07:24:32.767" Score="1" Body="&lt;p&gt;I loaded the Lubuntu software Center and it works great, so I have removed thew Ubuntu SC. Don't know what's up with it.&lt;/p&gt;&#xA;" OwnerUserId="7644" LastActivityDate="2016-12-04T07:24:32.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9526" PostTypeId="2" ParentId="9521" CreationDate="2016-12-04T07:26:39.833" Score="1" Body="&lt;p&gt;Couldn't resolve the Wallch issue, but loaded Variety and it does the job.&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="7644" LastActivityDate="2016-12-04T07:26:39.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9527" PostTypeId="2" ParentId="7776" CreationDate="2016-12-04T08:01:55.083" Score="4" Body="&lt;p&gt;I've found that this is caused by &lt;code&gt;ibus-daemon&lt;/code&gt; program. If you have ibus running on startup, remove it or add a startup item to kill the &lt;code&gt;ibus-daemon&lt;/code&gt;. You should be able to search in Slingshot launcher.&lt;/p&gt;&#xA;" OwnerUserId="5054" LastActivityDate="2016-12-04T08:01:55.083" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9529" PostTypeId="2" ParentId="9332" CreationDate="2016-12-04T10:32:01.597" Score="0" Body="&lt;p&gt;Hold down &lt;kbd&gt;Ctrl&lt;/kbd&gt; and right drag with the mouse.&lt;/p&gt;&#xA;" OwnerUserId="7648" LastEditorUserId="160" LastEditDate="2016-12-06T07:36:36.690" LastActivityDate="2016-12-06T07:36:36.690" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9531" PostTypeId="2" ParentId="1" CreationDate="2016-12-04T13:18:27.863" Score="-1" Body="&lt;p&gt;I just installed elementary OS to give it a try. From time to time, I always want to check if there is a real practical alternative (free) to Windows. Every time I've failed. Ubuntu = wrong GUI for my taste, Zorin = good, but utterly useless since has the wi-fi problem - keeps dropping, spent a day to fix it with no use. Now eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I want to do is to change minimize, maximize, close buttons to the right - windows style, since I do not intend to re-learn muscle memory. I have failed. I am using a Loki (Ubuntu 16.04 LTS xenial). I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&lt;/code&gt; in the console, logged out, restarted etc&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;dconf-editor&lt;/code&gt;, then went to &lt;code&gt;org &amp;gt; pantheon &amp;gt; desktop &amp;gt; gala &amp;gt; appearance&lt;/code&gt;, then changed to &lt;code&gt;:minimize,maximize,close&lt;/code&gt;. logged out, restarted etc&lt;/li&gt;&#xA;&lt;li&gt;I did not used any &lt;code&gt;tweaker&lt;/code&gt;s for this, since everybody are complaining they are system breakers and lack any support.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me if there is a workaround for this or I'll trow this distro (again) into the abyss?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;later: found &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/unity-settings-daemon/+bug/1568490&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;. &lt;strong&gt;It's a Won't fix for systems based on &gt; Ubuntu 14&lt;/strong&gt;. There's your answer. Well, goodbye to this distro. Again. &lt;/p&gt;&#xA;" OwnerUserId="7652" LastEditorUserId="7652" LastEditDate="2016-12-04T13:26:19.077" LastActivityDate="2016-12-04T13:26:19.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9532" PostTypeId="2" ParentId="1149" CreationDate="2016-12-04T17:23:29.750" Score="2" Body="&lt;p&gt;You can do many customizations using &lt;code&gt;elementary-tweaks&lt;/code&gt; switchboard plugin. But the older repository is not maintained by the original author anymore. Fortunately it's been forked by some other devs and the source is available in Github. Here is the project link &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also has a PPA. So, add the ppa and update-index using this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp; sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and install it using this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logout and login again. You'll find the tweak item in &lt;strong&gt;System Settings&lt;/strong&gt;. Alternatively you can just kill the &lt;code&gt;wingpanel&lt;/code&gt; and start it again. &lt;/p&gt;&#xA;" OwnerUserId="5054" LastActivityDate="2016-12-04T17:23:29.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9533" PostTypeId="1" AcceptedAnswerId="9552" CreationDate="2016-12-04T18:50:18.733" Score="2" ViewCount="991" Body="&lt;p&gt;I've added the Daily PPA (don't worry, I have another partition with a stable elementary, this is just for learning) and when I try to &lt;code&gt;apt upgrade -f&lt;/code&gt; (or the same without the -f) I get the following error:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Reading package lists... Done&#xA; Building dependency tree       &#xA; Reading state information... Done&#xA; Correcting dependencies... failed.&#xA; The following packages have unmet dependencies:&#xA; appstream-data-pantheon-icons : Depends: appstream-data-pantheon but it is not installed&#xA; E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. E: Unable to correct dependencies&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried to &lt;code&gt;apt install -f appstream-data-pantheon-icons&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;appstream-data-pantheon-icons is already the newest version (0.3.0-0~11~ubuntu0.4.1).&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA;appstream-data-pantheon-icons : Depends: appstream-data-pantheon but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then &lt;code&gt;apt install -f appstream-data-pantheon&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;   appstream-data-pantheon&#xA;0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.&#xA;83 not fully installed or removed.&#xA;Need to get 0 B/66,1 kB of archives.&#xA;After this operation, 74,8 kB of additional disk space will be used.&#xA;(Reading database ... 181367 files and directories currently installed.)&#xA;Preparing to unpack .../appstream-data-pantheon_0.3.0-0~11~ubuntu0.4.1_all.deb ...&#xA;Unpacking appstream-data-pantheon (0.3.0-0~11~ubuntu0.4.1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~11~ubuntu0.4.1_all.deb (--unpack):&#xA; trying to overwrite '/usr/share/app-info/yaml/pantheon_xenial-main_amd64.yml.gz', which is also in package appstream-data-pantheon-loki-stable 0.4+r13~ubuntu0.4.1&#xA;Processing triggers for appstream (0.10.4-1~elementary0.4.1) ...&#xA;AppStream cache update completed successfully.&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~11~ubuntu0.4.1_all.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What do I do now?&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-06T15:32:43.163" Title="I've added the Daily PPA and Appstream causes an error when trying to upgrade" Tags="|updates|apt|development|ppa|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9534" PostTypeId="2" ParentId="9517" CreationDate="2016-12-04T20:08:46.193" Score="-1" Body="&lt;p&gt;Are you sure that &lt;em&gt;pt7.png&lt;/em&gt; icon file exists in &lt;em&gt;/usr/share/pixmaps&lt;/em&gt; folder?&lt;/p&gt;&#xA;" OwnerUserId="7655" LastActivityDate="2016-12-04T20:08:46.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9535" PostTypeId="2" ParentId="9524" CreationDate="2016-12-05T03:57:28.153" Score="0" Body="&lt;p&gt;reddt said nope. &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5ge82r/how_can_i_install_the_latest_pantheonfiles03xx/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/5ge82r/how_can_i_install_the_latest_pantheonfiles03xx/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone decides to go ahead and try, do tell here, how it went.&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2016-12-05T03:57:28.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9536" PostTypeId="1" CreationDate="2016-12-05T05:37:21.313" Score="2" ViewCount="1417" Body="&lt;p&gt;When I use the search function in &quot;Files&quot; in Elementary OS Loki, it only finds files in the folder that I'm currently in. Any way to activate recursive search?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I install the &quot;Files&quot; version that is in the App Center, there search works as expected, but in the built-in version that comes with Loki it does not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks guys.&lt;/p&gt;&#xA;" OwnerUserId="7661" LastEditorDisplayName="user170" LastEditDate="2016-12-05T14:08:14.837" LastActivityDate="2016-12-05T14:13:35.147" Title="File search doesn't work in Loki" Tags="|release-loki|pantheon-files|search|nautilus|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9537" PostTypeId="2" ParentId="9536" CreationDate="2016-12-05T09:27:44.820" Score="2" Body="&lt;p&gt;Considering Pantheon Files (&quot;File Manager&quot; in Loki, not to be confused with Nautilus sometimes called &quot;Files&quot;) the search tool it's a bit different and rather &lt;strong&gt;limited&lt;/strong&gt; compared to those of Nautilus or Dolphin, or to specialized tools like Catfish or Gnome-Search - especially in the way it displays the results.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Search in current directory takes place by just typing the search.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Recursive search (current folder and sub-folders) takes place by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; and then typing.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Typing or clicking during search process will stop the search.&lt;/strong&gt; Take care &lt;strong&gt;not to type or click during search process&lt;/strong&gt;. More &lt;a href=&quot;https://elementaryos.stackexchange.com/a/260/170&quot;&gt;here&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The results are listed just as a drop-down list (and &lt;a href=&quot;https://elementaryos.stackexchange.com/q/122/170&quot;&gt;not as a file manager window&lt;/a&gt; or search-tool window) that also never contains more than &lt;a href=&quot;https://elementaryos.stackexchange.com/q/9539/170&quot;&gt;ten items&lt;/a&gt; and that goes away in a second if you click or focus away in any way. (So, the search is 'recursive' with &lt;kbd&gt;Ctrl&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; but you only get ten results). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/m3VhO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m3VhO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-05T14:13:35.147" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9538" PostTypeId="2" ParentId="9288" CreationDate="2016-12-05T09:29:12.450" Score="1" Body="&lt;p&gt;Add the following at the end of the file:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo pantheon-text-editor /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf&#xA;&#xA;[Mapping analog-surround-21]&#xA;device-strings = surround21:%f&#xA;channel-map = front-left,front-right,lfe&#xA;vpaths-output = analog-output analog-output-lineout analog-output-speaker analog-output-desktop-speaker&#xA;priority = 10&#xA;direction = output&#xA;&#xA;&#xA;sudo pantheon-text-editor /usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common&#xA;&#xA;[Element PCM]&#xA;switch = on&#xA;volume = ignore&#xA;override-map.1 = all&#xA;override-map.2 = all-left,all-right&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then create this file and add that one line.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-text-editor ~/.config/pulse/daemon.conf&#xA;&#xA;enable-lfe-remixing = yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now install this packages &lt;code&gt;sudo apt install cmt blop ladspa-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, you need to create this file but now you'll have to change &lt;code&gt;alsa_output.pci-0000_00_1b.0.analog-stereo-21&lt;/code&gt; to the output of &lt;code&gt;pactl list sinks | grep Name&lt;/code&gt; (Omiting the &quot;Name&quot; word). If you have more than one, ask me first.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.config/pulse/default.pa&#xA;&#xA;load-module module-ladspa-sink  sink_name=ladspa_low_pass master=alsa_output.pci-0000_00_1b.0.analog-stereo-21 plugin=lp4pole_1671 label=lp4pole_fcrcia_oa control=200,0&#xA;load-module module-remap-sink   sink_name=remapLFE        master=ladspa_low_pass                               remix=no   channels=1 master_channel_map=lfe                    channel_map=lfe&#xA;load-module module-remap-sink   sink_name=remap20         master=alsa_output.pci-0000_00_1b.0.analog-stereo-21 remix=no   channels=2 master_channel_map=front-left,front-right channel_map=front-left,front-right&#xA;load-module module-combine-sink sink_name=combine         slaves=remap20,remapLFE                                         channels=3                                           channel_map=front-left,front-right,lfe&#xA;set-default-sink combine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Answer taken from &lt;a href=&quot;https://wiki.archlinux.org/index.php/ASUS_N55SF#Audio&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-05T09:29:12.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9539" PostTypeId="1" AcceptedAnswerId="9555" CreationDate="2016-12-05T10:36:57.723" Score="1" ViewCount="102" Body="&lt;p&gt;I have answered myself a few times here on how to search files with Pantheon Files (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/9537/170&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/a/260/170&quot;&gt;here&lt;/a&gt;) but I  now realize that the drop-down list of search results has no more than ten items.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0VcVA.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0VcVA.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the end there are three points that suggest more results are to be found but clicking that shows nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FiVpZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FiVpZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-07T18:18:44.057" Title="More than ten search-results in Pantheon Files?" Tags="|pantheon-files|files|search|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9540" PostTypeId="2" ParentId="9437" CreationDate="2016-12-05T11:08:34.960" Score="1" Body="&lt;p&gt;This is a bug reported on Launchpad here : &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1646020&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppCenter crashes when typing&lt;/a&gt;. The two-character crash is mentioned.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2016-12-05T11:08:34.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9541" PostTypeId="2" ParentId="9481" CreationDate="2016-12-05T14:10:19.123" Score="1" Body="&lt;p&gt;I think I solved my problem. a matter of not checking what's obvious....here is a picture of software&amp;amp;updates and the default settings: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/680965/software-updates-defaults&quot;&gt;https://askubuntu.com/questions/680965/software-updates-defaults&lt;/a&gt;&lt;br&gt;&#xA;For some reason the 2 upper settings; canonical en community were off....After switching them on and do a sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade -y, the problem was solved. I can install packages again. I noticed the problem when I started trying installing dependencies manually, till I found that the dependencies gave a &quot;no installation candidate:&quot; error. Than I checked the software&amp;amp;update settings...&lt;/p&gt;&#xA;" OwnerUserId="7603" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-12-05T16:05:01.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9542" PostTypeId="2" ParentId="9502" CreationDate="2016-12-05T16:18:45.207" Score="2" Body="&lt;p&gt;Today I've downgraded the linux kernel to get rid of this issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge linux-image-4.4.0-51-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my kernel version is &lt;code&gt;4.4.0-38-generic&lt;/code&gt; and there is no any sound issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not: At the same time I had been experiencing a shutdown issue. Also it solved!&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2016-12-05T16:18:45.207" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9543" PostTypeId="1" CreationDate="2016-12-05T17:35:11.353" Score="1" ViewCount="606" Body="&lt;p&gt;I just started using elementary OS and I ran into some problems.&#xA;First time I installed elementary OS, my sound was working for a while but then stopped.&#xA;I updated all packages, tried some stuff from Ubuntu forums but didn't work.&#xA;So I reinstalled elementary OS, and my sound was working as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, after a while this happened again. My audio input/output devices are not recognized. (not even in pavu control).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalling ALSA or rebooting didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using some integrated Intel audio card on a new Lenovo laptop (i5 kaby lake cpu). Not using dual boot. elementary OS is my only system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been debugging this for a long time, but I didn't succeed. Please help!&#xA;Every answer is much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="7667" LastEditorUserId="578" LastEditDate="2016-12-05T21:16:30.467" LastActivityDate="2016-12-05T21:16:30.467" Title="Sound output device suddenly not recognized (loki 0.4 stable)" Tags="|release-loki|sound|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9544" PostTypeId="2" ParentId="9470" CreationDate="2016-12-05T17:58:10.070" Score="-1" Body="&lt;p&gt;New &lt;code&gt;appcenter&lt;/code&gt; 0.1.3 is out.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7654" LastEditorUserId="26" LastEditDate="2016-12-09T16:15:52.517" LastActivityDate="2016-12-09T16:15:52.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9545" PostTypeId="2" ParentId="9503" CreationDate="2016-12-05T18:01:02.930" Score="1" Body="&lt;p&gt;New appcenter is out,0.1.3, sudo apt-get remove appcenter &amp;amp;&amp;amp; sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install appcenter&lt;/p&gt;&#xA;" OwnerUserId="7654" LastActivityDate="2016-12-05T18:01:02.930" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9546" PostTypeId="2" ParentId="9503" CreationDate="2016-12-05T18:45:22.473" Score="1" Body="&lt;p&gt;The issue has been resolved. I just downloaded the updates and it does not crash when you insert 2 characters or search through the categories :)&lt;/p&gt;&#xA;" OwnerUserId="7537" LastActivityDate="2016-12-05T18:45:22.473" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9548" PostTypeId="2" ParentId="7973" CreationDate="2016-12-05T19:48:45.443" Score="1" Body="&lt;p&gt;The media sharing in System Settings uses a protocol called DLNA. This isn't a network file share like Samba. It's meant for smart media devices like Bluray players, TVs, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to share files to another computer, you'll need to set up a regular network share.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-05T19:48:45.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9549" PostTypeId="2" ParentId="9382" CreationDate="2016-12-05T19:52:05.470" Score="1" Body="&lt;p&gt;Reflashing my Gigabyte motherboard BIOS to the newest version (F18 - F20) fixed it. &lt;/p&gt;&#xA;" OwnerUserId="7507" LastActivityDate="2016-12-05T19:52:05.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9550" PostTypeId="1" CreationDate="2016-12-05T20:29:56.807" Score="2" ViewCount="5626" Body="&lt;p&gt;I don't know why, but I have no sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only speakers, when I plug a jack it's work.&#xA;My speaker are working on windows (dual boot)&#xA;I don't realy know what I need to do.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;carte 0: PCH [HDA Intel PCH], périphérique 0: ALC233 Analog [ALC233 Analog]&#xA;  Sous-périphériques: 1/1&#xA;  Sous-périphérique #0: subdevice #0&#xA;carte 0: PCH [HDA Intel PCH], périphérique 3: HDMI 0 [HDMI 0]&#xA;  Sous-périphériques: 1/1&#xA;  Sous-périphérique #0: subdevice #0&#xA;carte 0: PCH [HDA Intel PCH], périphérique 7: HDMI 1 [HDMI 1]&#xA;  Sous-périphériques: 1/1&#xA;  Sous-périphérique #0: subdevice #0&#xA;carte 0: PCH [HDA Intel PCH], périphérique 8: HDMI 2 [HDMI 2]&#xA;  Sous-périphériques: 1/1&#xA;  Sous-périphérique #0: subdevice #0&#xA;&#xA;00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)&#xA;    Subsystem: Device 1d72:1501&#xA;    Flags: bus master, fast devsel, latency 32, IRQ 279&#xA;    Memory at b1128000 (64-bit, non-prefetchable) [size=16K]&#xA;    Memory at b1110000 (64-bit, non-prefetchable) [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;    Kernel modules: snd_hda_intel, snd_soc_skl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT : This bug append when I upgraded my PC : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Upgrade: procps:amd64 (2:3.3.10-4ubuntu2.2, 2:3.3.10-4ubuntu2.3), libprocps4:amd64 (2:3.3.10-4ubuntu2.2, 2:3.3.10-4ubuntu2.3)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7285" LastEditorUserId="7285" LastEditDate="2016-12-07T06:53:59.627" LastActivityDate="2018-05-02T01:16:31.663" Title="No Sound for no reason" Tags="|release-loki|intel|audio|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="9551" PostTypeId="2" ParentId="7611" CreationDate="2016-12-05T21:36:09.827" Score="-3" Body="&lt;p&gt;I found an older 32 bit version @ &lt;a href=&quot;http://linux.softpedia.com/get/System/Operating-Systems/Linux-Distributions/Elementary-OS-67717.shtml&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://linux.softpedia.com/get/System/Operating-Systems/Linux-Distributions/Elementary-OS-67717.shtml&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7673" LastActivityDate="2016-12-05T21:36:09.827" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9552" PostTypeId="2" ParentId="9533" CreationDate="2016-12-05T21:41:05.757" Score="2" Body="&lt;p&gt;As you can see there is a conflict between two packages (&lt;code&gt;appstream-data-pantheon&lt;/code&gt; and &lt;code&gt;appstream-data-pantheon-loki-stable&lt;/code&gt;) that both want to install a file (&lt;code&gt;/usr/share/app-info/yaml/pantheon_xenial-main_amd64.yml.gz&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to (in this order, preferably):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;wait for the bug to be corrected :)&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;remove the older package if you do not need it any more&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove appstream-data-pantheon-icons &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;choose to overwrite the selected file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install --force-overwrite /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~11~ubuntu0.4.1_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-12-06T15:32:43.163" LastActivityDate="2016-12-06T15:32:43.163" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9553" PostTypeId="2" ParentId="9524" CreationDate="2016-12-05T21:44:32.580" Score="2" Body="&lt;p&gt;If you really need it, you might want to compile it from the source code with static linking to the newer libraries so that it does not mix up with the libraries already installed on your system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need or will need in the foreseeable future more software updates than this one, you might just consider to install elementary OS 0.4 Loki.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-05T21:44:32.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9554" PostTypeId="2" ParentId="9521" CreationDate="2016-12-05T21:52:37.713" Score="0" Body="&lt;p&gt;Actually Wallch (&lt;a href=&quot;http://melloristudio.com/wallch/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://melloristudio.com/wallch/&lt;/a&gt;) is not supposed to work on elementary OS. You might want to file a feature request at &lt;a href=&quot;https://bugs.launchpad.net/wallpaper-changer&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/wallpaper-changer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-05T21:52:37.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9555" PostTypeId="2" ParentId="9539" CreationDate="2016-12-05T22:01:45.303" Score="4" Body="&lt;p&gt;Actually this limit of 10 is hard-coded in the software code of &lt;code&gt;pantheon-files&lt;/code&gt; (&lt;code&gt;libwidgets/View/SearchResults.vala&lt;/code&gt;, lines 59-61)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    const int MAX_RESULTS = 10;&#xA;    const int MAX_DEPTH = 5;&#xA;    const int DELAY_ADDING_RESULTS = 150;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can even increase this number in order to display more results, but nevertheless the number of results displayed stays limited. You can change the number 10 after &lt;code&gt;MAX_RESULTS =&lt;/code&gt; to the value wanted in the file and rebuild the package (&lt;code&gt;debuild -us -uc&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you still might want to file a feature request to implement a way of showing all results when you click on the &quot;…&quot;, however.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-12-07T18:18:44.057" LastActivityDate="2016-12-07T18:18:44.057" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9557" PostTypeId="1" CreationDate="2016-12-06T01:43:04.370" Score="1" ViewCount="99" Body="&lt;p&gt;I am willing to contribute some money to this OS, What are the benefits that i get if I contribute some money? Benefits like any special access / privileges / life long updates?  Is there anything like that? &lt;/p&gt;&#xA;" OwnerUserId="7678" LastEditorUserId="578" LastEditDate="2016-12-07T07:29:35.877" LastActivityDate="2016-12-07T07:29:35.877" Title="If I donate once, do I get continuous updates of elementary OS whenever it is released?" Tags="|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9561" PostTypeId="1" CreationDate="2016-12-06T10:46:25.167" Score="0" ViewCount="268" Body="&lt;p&gt;submitted 20 minutes ago by dekela&#xA;I am trying to get loki to play nice with parallels and it seems there is a problem with the current kernel and the tools (video is in sw rendering mode) currently on kernel 4.4-51 and I would like to downgrade to a 4.2 kernel. how can I do that?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="756" LastEditorUserId="45" LastEditDate="2016-12-06T18:22:46.203" LastActivityDate="2016-12-06T19:40:36.577" Title="How can I downgrade to Linux Kernel 4.2?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9562" PostTypeId="1" CreationDate="2016-12-06T12:43:42.900" Score="1" ViewCount="824" Body="&lt;p&gt;I installed elementary os loki in my old macbook (white one 2007 I think) everything is ok and working fine except touchpad right-click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried with elementary s tweak, and touchpad configuration in system panel and editing /usr/share/X11/xorg.conf.d/50-synaptics.conf but nothing works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody could help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="7683" LastEditorUserId="45" LastEditDate="2016-12-08T06:54:58.643" LastActivityDate="2016-12-08T06:54:58.793" Title="Elementary os Loki touchpad right-click" Tags="|release-loki|touchpad|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9563" PostTypeId="2" ParentId="9557" CreationDate="2016-12-06T14:30:45.797" Score="0" Body="&lt;p&gt;Updates are for as long as elementary OS exists.&lt;/p&gt;&#xA;" OwnerUserId="7385" LastActivityDate="2016-12-06T14:30:45.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9565" PostTypeId="1" CreationDate="2016-12-06T15:32:40.137" Score="1" ViewCount="1104" Body="&lt;p&gt;I recently switched to elementary os (loki) and I love it so far. However, I am experiencing some problems. I am very new to Linux and find myself not really knowing what i'm doing most of the time when trying to solve these problems myself.&#xA;The issue that I am having is that after waking up from suspend my computer freezes on a black screen. This happens after closing and opening my laptop. When I enter suspend from the menu in elementary and attempt to wake it up again after that I am greeted with a lot of text, ending in a kernel panic message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found two possible solutions for this online. One is to install graphic card drivers. And another to install a different kernel version. Neither of these solutions worked out for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an AMD Radeon R7 M440 graphics card. The &quot;Additional Drivers&quot; utility does not seem to recognize this showing only: &quot;Unknown: Unknown&quot; and &quot;This device is not working&quot;. The driver from amd.com which should work on Ubuntu 16 causes me to not be able too boot at all (black screen after grub). I'm afraid that at this point I am at a dead end as far as the drivers are concerned. I hope that someone has another suggestion.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another suggestion I found regarding the black screen after suspend was to install a different kernel with the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install linux-headers-4.4.0-36 linux-headers-4.4.0-36-generic linux-image-4.4.0-36-generic linux-image-extra-4.4.0-36-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However this did not solve it for me. Also when I run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -r&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It shows that the kernel version is still 4.4.0-51-generic. I guess I just don't know what I'm doing. I hope someone can help!&lt;/p&gt;&#xA;" OwnerUserId="7685" LastActivityDate="2019-10-02T07:01:25.177" Title="Black screen or kernel panic after suspend?" Tags="|graphic-drivers|suspend|amd|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9566" PostTypeId="2" ParentId="9557" CreationDate="2016-12-06T15:34:11.287" Score="3" Body="&lt;p&gt;elementary OS is open source, that is (and much more than this but from this point of view) you get exactly the same software whether you pay or not. So there is nothing like &quot;special access / privileges / life long updates&quot; only for those who donate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as the development and the maintenance of a system like this need a lot of work and other resources, you are really more than welcome to donate if you can.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-06T15:34:11.287" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9567" PostTypeId="1" CreationDate="2016-12-06T16:54:02.573" Score="1" ViewCount="28" Body="&lt;p&gt;I followed all installation instructions to the letter, I didn't force UEFI so I could boot normally in OSX (MacPro 3,1).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation (on an external USB HDD) doesn't work at all, not when holding &quot;option&quot; not when going to &quot;startup disk&quot; in the control panel and not when popping all drives except the eOS one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="7684" LastActivityDate="2016-12-07T21:22:10.390" Title="New installation on MacPro not recognised" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9569" PostTypeId="2" ParentId="9486" CreationDate="2016-12-06T18:26:00.333" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;Open Calendar and click the &quot;Create New Event&quot; toolitem in the headerbar&lt;/li&gt;&#xA;&lt;li&gt;Under &quot;Title&quot;, type in the name of your event. For example &quot;Dancing at 7pm&quot;&lt;/li&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;Enter&lt;/kbd&gt; or click the arrow icon in the entry&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Calendar will do its best to parse the title and fill out other details for you :) &lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-12-07T18:57:56.587" LastActivityDate="2016-12-07T18:57:56.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9570" PostTypeId="2" ParentId="9217" CreationDate="2016-12-06T18:43:59.203" Score="3" Body="&lt;p&gt;You can configure the power button by opening System Settings -&gt; Power and making your selection from the dropdown labeled &quot;Power button&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bTeyH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bTeyH.png&quot; alt=&quot;Picture of System Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is not currently an option to show the end session dialog. This is not something that is provided by the upstream software component that elementary OS uses for this feature.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-06T18:43:59.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9571" PostTypeId="2" ParentId="9031" CreationDate="2016-12-06T18:55:59.607" Score="1" Body="&lt;p&gt;There are not any settings to increase the length that notifications stay on the screen. If you miss a notification, you can always review it in the notification indicator&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-06T18:55:59.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9573" PostTypeId="2" ParentId="9561" CreationDate="2016-12-06T19:40:36.577" Score="1" Body="&lt;p&gt;There is no Linux 4.2 kernel image package in Loki so unless you are an experienced user you should not downgrade the kernel as it &lt;strong&gt;might render your system completely useless&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to risk yourself to downgrade, you might want to start with a Ubuntu kernel image package at &lt;a href=&quot;http://packages.ubuntu.com/trusty/kernel/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.ubuntu.com/trusty/kernel/&lt;/a&gt; like&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/kernel/linux-image-4.2.0-42-generic&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.ubuntu.com/trusty/kernel/linux-image-4.2.0-42-generic&lt;/a&gt; (and dependecies, basically&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/linux-headers-4.2.0-42-generic&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.ubuntu.com/trusty/linux-headers-4.2.0-42-generic&lt;/a&gt; and &lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://packages.ubuntu.com/trusty/linux-headers-4.2.0-42&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.ubuntu.com/trusty/linux-headers-4.2.0-42&lt;/a&gt;).&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-06T19:40:36.577" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9574" PostTypeId="1" CreationDate="2016-12-06T19:51:37.280" Score="1" ViewCount="123" Body="&lt;p&gt;I've recently downloading Loki and I've tried to install it like one would. However it seems I've run into a few problems. Before I get into anything, I'm running on a Razer Blade 2016 with a 6700HQ and a 970m, I have a feeling NVIDIA could be the problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whenever I begin the installation, it runs for a few seconds, then gives me the following script:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ath10k_pci 0000:3b:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, gives me this line &lt;/p&gt;&#xA;&#xA;&lt;p&gt;NMI warchdog: BUG: soft lockup - CPU #(x) stuck for (2y)s! [plymouthd:253] &#xA;where x is whatever CPU core and y is number of seconds&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it displays anything after the soft lockup, it will tell me that &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Systemd-udevd:989 blocked for more than 120 seconds&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not quite sure where to go from here, I hope someone can help, thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="7689" LastActivityDate="2016-12-07T21:49:59.537" Title="CPU stalling on a Razer Blade During Installation" Tags="|release-loki|system-installation|cpu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9575" PostTypeId="2" ParentId="9550" CreationDate="2016-12-06T20:17:12.093" Score="1" Body="&lt;p&gt;I had a similar problem. Sound is very intermittent. Check the link below. It seems to have fixed my sound issue, for now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2016-12-06T20:17:12.093" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9576" PostTypeId="2" ParentId="7355" CreationDate="2016-12-07T06:20:12.457" Score="3" Body="&lt;h2&gt;Method 1&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;What worked for me was installing the Wicd Network Manager.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wicd  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You may or may not also need to uninstall the default network manager.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove network-manager-gnome network-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Method 2&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If /etc/nsswitch.conf has this line:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hosts:          files mdns4_minimal [NOTFOUND=return] dns mdns4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try editing it so it instead says:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hosts:          files dns&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Method 3&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Another suggestion is to type this in the terminal:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rt2800pci  &#xA;sudo modprobe -v rt2800pci nohwcrypt=1  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And if the internet speed improves, then:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/modprobe.d/rt2800pci.conf  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and type into the file:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;options rt2800pci nohwcrypt=1  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Method 4&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;IPv6 can cause issues, so to prefer IPv4 instead:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/gai.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Locate this line (note that it says 100 at the end, not 10):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#precedence ::ffff:0:0/96 100&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and remove the #.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sources:&lt;br&gt;&#xA;&lt;a href=&quot;http://www.techdrivein.com/2012/09/slow-erratic-wifi-ubuntu1204-fixed.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.techdrivein.com/2012/09/slow-erratic-wifi-ubuntu1204-fixed.html&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2175345&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2175345&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/a/790022/628841&quot;&gt;https://askubuntu.com/a/790022/628841&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7693" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-03-05T07:04:05.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9577" PostTypeId="1" CreationDate="2016-12-07T12:00:10.620" Score="1" ViewCount="87" Body="&lt;p&gt;I have an Asus U6sg and I have installed Elementary OS. I have a sound problem. I don't hear any sound. How can I invastigate if the problem is the sound card or software problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="7696" LastActivityDate="2019-02-08T20:11:42.743" Title="Sound problem. Don't hear anything, only external wireless speaker works" Tags="|sound|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9578" PostTypeId="2" ParentId="9567" CreationDate="2016-12-07T12:29:11.800" Score="0" Body="&lt;p&gt;You could try installing rEFIt on your EFI partition, this is will offer you more options when it comes to booting from alternative sources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install rEFIt from inside OS X.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://refit.sourceforge.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://refit.sourceforge.net/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7385" LastActivityDate="2016-12-07T12:29:11.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9579" PostTypeId="1" CreationDate="2016-12-07T12:55:16.443" Score="1" ViewCount="137" Body="&lt;p&gt;I have an Asus u6sg and when I have to install updates It tell me that I do not have enough space in the &quot;/boot&quot; disk. I can't be able to do changes with Gparted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: how can I insert here a screenshot saved in my Image folder?&lt;/p&gt;&#xA;" OwnerUserId="7696" LastActivityDate="2016-12-07T15:11:46.370" Title="Free space on /boot disk problem" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9580" PostTypeId="2" ParentId="9579" CreationDate="2016-12-07T15:11:46.370" Score="1" Body="&lt;p&gt;In order to change the size of your /boot partition you must run &lt;em&gt;gparted&lt;/em&gt; from a &quot;live DVD&quot; or &quot;Live USB&quot;. (You can use the one you've used to install the system). So:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot from &quot;Live  DVD&quot; or &quot;Live USB&quot;. (Make sure how your BIOS choose the device priority and arrange the device where your image is to boot)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run gparted and make the changes you want. (Size in your case). Check everything thoroughly to avoid mistakes.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart your computer removing the media you used for the live session when prompted. (If necessary revert your BIOS to the prior Boot priority).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; &lt;em&gt;It is advisable to backup your data before messing with your system.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2016-12-07T15:11:46.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9581" PostTypeId="1" CreationDate="2016-12-07T15:57:45.063" Score="1" ViewCount="33" Body="&lt;p&gt;I have reverted back to Freya with a fresh install due to kernel/display incompatibility with Loki on my machine. Now, on Freya, when I updated in response to a warning regarding Hardware Enablement Stake. But after that, my mouse is invisible when I resume from suspend moreover, sometimes login screen don't show/unresponsive. I will be thankful if someone suggests a solution and which package creating this mess.&lt;/p&gt;&#xA;" OwnerUserId="5946" LastActivityDate="2016-12-08T06:57:34.443" Title="Hardware Enablement Stake update make mouuse invisble on Freya" Tags="|release-freya|updates|greeter|hardware|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9582" PostTypeId="1" CreationDate="2016-12-07T15:58:33.473" Score="0" ViewCount="269" Body="&lt;p&gt;i changed my cursor to breeze a while ago and now i wanted to change to another cursor theme again but i couldnt make it.instead my cursor changed to an old weird theme.now i cant go back to breeze either.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/892/how-to-change-the-mouse-cursor-theme&quot;&gt;How to change the mouse cursor theme?&lt;/a&gt;&#xA;i installed the theme with this guide&#xA;how can i go back to elementary OS stock?&lt;/p&gt;&#xA;" OwnerUserId="7553" LastEditorUserId="308" LastEditDate="2018-08-07T18:22:29.340" LastActivityDate="2019-01-10T09:23:23.633" Title="mouse cursor reset to a weird old cursor" Tags="|settings|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9583" PostTypeId="2" ParentId="9550" CreationDate="2016-12-07T17:26:10.613" Score="1" Body="&lt;p&gt;An update has been released this afternoon and it's work now.&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-12-07T17:26:10.613" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9585" PostTypeId="1" CreationDate="2016-12-07T20:29:20.710" Score="0" ViewCount="72" Body="&lt;p&gt;when I try to update my elementary Loki from terminal I found this thing I don't know What is it mean&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: http://archive.canonical.com/ubuntu/dists/maverick/InRelease: Signature by key 630239CC130E1A7FD81A27B140976EAF437D05B5 uses weak digest algorithm (SHA1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't know how to fix it so anyone can help I will be so happy&lt;/p&gt;&#xA;" OwnerUserId="7701" LastEditorUserId="84" LastEditDate="2018-05-06T18:23:50.330" LastActivityDate="2018-05-06T18:23:50.330" Title="I have a problem about updating system" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9587" PostTypeId="2" ParentId="7727" CreationDate="2016-12-07T20:45:57.157" Score="0" Body="&lt;p&gt;I agree, keyboard options are very poor to date. Ideally I need the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;remap the cmd and ctrl keys on my apple keyboard - I use both systems often and it's a pain to try to remember which is which. I want to flip them in eOS so ctrl is cmd and vice versa.&lt;/li&gt;&#xA;&lt;li&gt;I'm an English speaker living in Europe, and so need access to special characters like ö, ü, ä, accents and the € symbol. The compose+shift+&quot;+letter works well enough but really slows down typing in German. The apple system of opt+u+letter for umlaut and so on is quite elegant and I'd like to use that if it's possible.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7684" LastEditorUserId="7684" LastEditDate="2016-12-07T21:07:38.127" LastActivityDate="2016-12-07T21:07:38.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9588" PostTypeId="2" ParentId="9567" CreationDate="2016-12-07T21:22:10.390" Score="1" Body="&lt;p&gt;It seems I've solved it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My external was one of those ones with a small first partition for backup software and such. I reformatted with one partition and it all works fine now.&lt;/p&gt;&#xA;" OwnerUserId="7684" LastActivityDate="2016-12-07T21:22:10.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9589" PostTypeId="2" ParentId="7727" CreationDate="2016-12-07T21:34:20.463" Score="1" Body="&lt;p&gt;Download tweak tool from the app centre. It covers the cmd/ctrl switch and lets you assign € to shift+4 instead of $.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;looking for the umlaut options still...&lt;/p&gt;&#xA;" OwnerUserId="7684" LastActivityDate="2016-12-07T21:34:20.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9590" PostTypeId="2" ParentId="9585" CreationDate="2016-12-07T21:43:31.647" Score="2" Body="&lt;p&gt;&lt;strong&gt;This line is basically a warning about old software.&lt;/strong&gt; &lt;em&gt;There are no pieces of software or software repositories that will be removed after an update with this warning.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most likely you have a PPA / other software repository that uses an ancient digest algorithm but you cannot fix it locally, you have to contact the owner of the repository. In this case, Ubuntu maverick was a release about 6 years ago, so there is not much chance that this warning gets fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if security is not your primary concern (as in using 6 years old software repository / distribution…) you can ignore this warning.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-12-08T06:19:29.360" LastActivityDate="2016-12-08T06:19:29.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9591" PostTypeId="2" ParentId="9574" CreationDate="2016-12-07T21:49:59.537" Score="1" Body="&lt;p&gt;For the messages you indicate, I can see two problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first of them is about the wireless card (Atheros ath10k). The boot process can't find the firmware file named &lt;em&gt;firmware-5.bin&lt;/em&gt;. There are some forks to the official driver. So, using them, you can copy  the necessary files to yor system. You can find more information in the following Stackexchange Q&amp;amp;A:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/770930/408622&quot;&gt;Problem with Qualcomm Atheros QCA6174&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the second message,  the 6th gen chipset in Razor Blade 2016 isn't well supported until kernel 4.7. Loki is based on kernel 4.4, so a possible solution should be to upgrade the kernel to 4.7 release. You can find some articles about upgrading kernel in ubuntu 16.04 based distros, like elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this upgrade can become unstable your system,  so try before a possible solution installing Loki with some options about graphics card, adding &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;i915.preliminary_hw_support=1 nolapic nouveau.modeset=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to the grub line on instalation drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info and source of this trick at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://xipherzero.com/ubuntu-16-04-razer-blade-2016/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installing Ubuntu 16.04 on Razer Blade (2016)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this help to spend a good time with elementary and that fanstastic machine.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-12-07T21:49:59.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9592" PostTypeId="2" ParentId="7963" CreationDate="2016-12-07T22:21:12.280" Score="4" Body="&lt;h2&gt;Low-level sqlite approach&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The file-color associations are stored in the &lt;code&gt;~/.config/marlin/marlin.db&lt;/code&gt; sqlite database. You can try to reverse-engineer the format, as far as I have seen, there is one table &lt;code&gt;tags&lt;/code&gt;, as seen in the dump:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CREATE TABLE tags (id INTEGER PRIMARY KEY,&#xA;                   uri TEXT UNIQUE NOT NULL,&#xA;                   color INTEGER DEFAULT 0,&#xA;                   tags TEXT NULL,&#xA;                   content_type TEXT,&#xA;                   modified_time INTEGER DEFAULT 0,&#xA;                   dir TEXT );&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Update/delete file color&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;So basically you need to either the color already in the base as in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UPDATE tags set color=1 WHERE uri = 'file:///home/user/test'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;changed the color of the file &lt;code&gt;~/test&lt;/code&gt; to yellow (1).&#xA;Colors seem to be &lt;code&gt;0&lt;/code&gt; (no color) and &lt;code&gt;1…9&lt;/code&gt; (yellow, orange, etc. as shown in the file &lt;em&gt;Properties&lt;/em&gt; dialog).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to delete the color, you only have to set &lt;code&gt;color=0&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Set file color&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If there is no entry for the file specified, you should create it with some housekeeping:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;id&lt;/code&gt; might be NULL as in auto-assigned,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;uri&lt;/code&gt; is the URI of the file of which you want to change the color&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;tags&lt;/code&gt; = NULL as in nothing special for now,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;content_type&lt;/code&gt; you might find this with the &lt;code&gt;file&lt;/code&gt; utility,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;modified_time&lt;/code&gt; seems to be a simple Unix time stamp,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;dir&lt;/code&gt; I don't really know but the parent directory seems to be a safe bet.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This line seems to work and has set the color of &lt;code&gt;~/new_file&lt;/code&gt; not present in the database before to green (4):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;INSERT INTO tags VALUES (NULL, 'file:///home/user/new_file', 4, NULL, 'text/plain', 1481148148, 'file:///home/user');&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, be careful and double-check this with the source code of &lt;code&gt;pantheon-files&lt;/code&gt; as this might render your database inconsistent. The relevant source file seems to be &lt;code&gt;pantheon-files-daemon/marlind-tagging.vala&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-12-08T10:24:07.420" LastActivityDate="2016-12-08T10:24:07.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9595" PostTypeId="1" AcceptedAnswerId="9597" CreationDate="2016-12-08T06:57:15.443" Score="0" ViewCount="105" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ObWt2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ObWt2.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says there is only 996.7MB left of the home partition, but in the pantheon-files, it tells me that there are 98.2GB free out of 1.9TB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The output of df -h: (I have deleted some files)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;檔案系統          容量   已用  可用  已用% 掛載點&#xA;udev            1.8G     0  1.8G    0% /dev&#xA;tmpfs           364M  6.2M  357M    2% /run&#xA;/dev/sdb2        28G   11G   17G   39% /&#xA;tmpfs           1.8G   24M  1.8G    2% /dev/shm&#xA;tmpfs           5.0M  4.0K  5.0M    1% /run/lock&#xA;tmpfs           1.8G     0  1.8G    0% /sys/fs/cgroup&#xA;/dev/loop0       75M   75M     0  100% /snap/ubuntu-core/423&#xA;/dev/sdb4       1.8T  1.7T  4.2G  100% /home&#xA;/dev/sdb1       285M  8.2M  277M    3% /boot/efi&#xA;cgmfs           100K     0  100K    0% /run/cgmanager/fs&#xA;tmpfs           364M   64K  364M    1% /run/user/1000&#xA;/dev/sda1       917G  756G  115G   87% /media/laichiaheng/66418ba9-d180-4fe1-a2b7-8bc097bb50f1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2016-12-08T08:00:01.997" LastActivityDate="2016-12-08T08:08:07.007" Title="It says there are only 996MB free space of my home partition, but the pantheon-files tells me that there are 98.2G free out of 1.9TB" Tags="|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9596" PostTypeId="2" ParentId="9581" CreationDate="2016-12-08T06:57:34.443" Score="1" Body="&lt;p&gt;The best solution is to upgrade to Loki. Loki contains a newer hardware support stack including a new Intel driver that doesn't have the mouse cursor issue.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-08T06:57:34.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9597" PostTypeId="2" ParentId="9595" CreationDate="2016-12-08T07:33:58.530" Score="1" Body="&lt;p&gt;Can you please post the output of df -h ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;Please Check &lt;a href=&quot;https://askubuntu.com/questions/249387/df-h-used-space-avail-free-space-is-less-than-the-total-size-of-home&quot;&gt;this&lt;/a&gt; link.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;By default, ext2/3/4 filesystems reserve 5% of the space to be useable&#xA;  only by root. This is to avoid a normal user completely filling the&#xA;  disk which would then cause system components to fail whenever they&#xA;  next needed to write to the disk. You can see the number of reserved&#xA;  blocks (and lots of other information about the filesystem) by doing:&#xA;  sudo tune2fs -l /dev/sda8&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="7625" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-12-08T08:08:07.007" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9598" PostTypeId="1" CreationDate="2016-12-08T10:22:57.457" Score="0" ViewCount="328" Body="&lt;p&gt;Hello I have a problem with ubuntu installed on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop is ASUS K501U with NVIDIA Corporation GM107M [GeForce GTX 950M] (rev a2). My System is elementary OS 0.3.2 Freya (64-bit).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is after I installed updates to my system my graphic card drivers broke. When I turn on the computer I get black screen after selecting the system ( I have ubuntu and windows installed) I think that it is working because I can hear the login screen sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I found was : &lt;a href=&quot;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&quot;&gt;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it only displays the screen with 1024x764 resolution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found that I can install other drivers from software updates. But selecting e.g nvidia 375.20, which is recommened for this graphic card breaks the display again ( black after rebooting ) and I have to repeat to process from the link above once again and use low resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried this link: &lt;a href=&quot;https://askubuntu.com/questions/684181/asus-strix-gtx970-unable-to-get-1920x1080-resolution-ubuntu-14-04&quot;&gt;https://askubuntu.com/questions/684181/asus-strix-gtx970-unable-to-get-1920x1080-resolution-ubuntu-14-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But nothing changed, still black screen after reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help :(&lt;/p&gt;&#xA;" OwnerUserId="7707" OwnerDisplayName="Maciej Szuchta" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2019-08-27T05:01:55.287" Title="elementary OS 0.3.2 Freya (64-bit) (Ubuntu 14.04) black screen after Update" Tags="|drivers|nvidia|graphics|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9599" PostTypeId="1" AcceptedAnswerId="9640" CreationDate="2016-12-08T10:45:28.300" Score="0" ViewCount="155" Body="&lt;p&gt;My Elementary OS on &lt;code&gt;4.4.0-53-generic&lt;/code&gt; kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It writes about 1,414 lines &lt;code&gt;syslog&lt;/code&gt; at every startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually &lt;em&gt;my computer starts a few seconds late today as never before&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Last night I run the command of &lt;code&gt;sudo apt-get install --reinstall alsa-base linux-image-'uname -r' libasound2 alsa-utils alsa-tools&lt;/code&gt; to fix the sound problem and I updated system via AppCenter)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I check the &lt;code&gt;syslog&lt;/code&gt;. I realized that 1414 lines have been added when the computer starting up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I thought that the logging may be relevant with late startup issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So adding 1,414 lines of syslog when computer starting up is normal?&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="7495" LastEditDate="2016-12-08T10:50:30.633" LastActivityDate="2016-12-10T07:57:07.270" Title="1,414 lines of syslog has been written when computer starting up - is it normal?" Tags="|release-loki|system|startup|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9602" PostTypeId="1" AcceptedAnswerId="9603" CreationDate="2016-12-08T11:52:05.617" Score="0" ViewCount="645" Body="&lt;p&gt;I'm using Elementary OS Loki on my Dell XPS 9550.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard layout I'm using is English (US, International with dead keys). This works perfectly in every application I have tested so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I try to type in my IDE, PhpStorm (based on IntelliJ IDE), the special characters such as ' and ` do not register.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Normally these are done with a combination keypress, even for single quotes. For example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;' + space = '&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot; + space = &quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In PhpStorm, the first keypress seems to be ignored completely. Pressing space afterwards just results in an actual space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice on fixing this would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="7708" LastActivityDate="2019-08-22T11:28:24.710" Title="PhpStorm: Dead keys not working (for ', &quot;, etc)" Tags="|release-loki|keyboard|input|ide|java|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9603" PostTypeId="2" ParentId="9602" CreationDate="2016-12-08T12:42:28.933" Score="0" Body="&lt;p&gt;I was able to fix this issue by executing &lt;code&gt;ibus-setup&lt;/code&gt; in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/774237/dead-keys-accents-stopped-working-after-upgrading-to-ubuntu-16-04&quot;&gt;https://askubuntu.com/questions/774237/dead-keys-accents-stopped-working-after-upgrading-to-ubuntu-16-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix it permanently you need to figure out how to start &lt;code&gt;ibus-deamon&lt;/code&gt; on system startup (I haven't quite figured that one out yet).&lt;/p&gt;&#xA;" OwnerUserId="7708" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2016-12-21T19:47:41.520" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9605" PostTypeId="1" CreationDate="2016-12-08T14:07:07.593" Score="2" ViewCount="2556" Body="&lt;p&gt;Im new to elementary os andi want to know how to best install nvidia graphics driver  for  the above model (i used 364.51 for windows 10 ) on loki&lt;/p&gt;&#xA;" OwnerUserId="7710" LastActivityDate="2018-09-20T19:48:20.673" Title="How to install nvidia graphics driver for nvidia 820m on loki?" Tags="|drivers|nvidia|graphics|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9606" PostTypeId="1" CreationDate="2016-12-08T15:19:53.780" Score="0" ViewCount="166" Body="&lt;p&gt;sorry that this question is &quot;stupid&quot; : ) So, I've installed elementary, figured out how to access the internet, downloaded two of my favorite programs (LibreOffice and Firefox), clicked on the packages and &quot;extracted&quot; the files. Where did the applications go? and How do I put them in my applications file? Nothing in the extracted files has the names of the applications (that I could find). Thank you.&lt;/p&gt;&#xA;" OwnerUserId="5962" LastActivityDate="2016-12-09T03:23:49.997" Title="newby from Mac: how do I &quot;install&quot; a program I've downloaded" Tags="|applications|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9607" PostTypeId="2" ParentId="2753" CreationDate="2016-12-08T15:28:38.087" Score="2" Body="&lt;p&gt;You can, as in the example below (I used Google Docs as I do not have the other app but it should work exactly in the same way).&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install the chrome app in question in the application menu (right-click and &lt;em&gt;Create shortcuts…&lt;/em&gt; in Chrome Apps tab). For me it created the file &lt;code&gt;~/.local/share/applications/chrome-aohghmighlieiainnegkcijnfilokake-Default.desktop&lt;/code&gt;, find the &lt;code&gt;.desktop&lt;/code&gt; that corresponds to your Chrome App.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Append &lt;code&gt;%F&lt;/code&gt; with a text editor in the &lt;code&gt;Exec=&lt;/code&gt; line (see below):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env xdg-open&#xA;[Desktop Entry]&#xA;Version=1.0&#xA;Terminal=false&#xA;Type=Application&#xA;Name=Google Docs&#xA;Exec=/opt/google/chrome/google-chrome --profile-directory=Default --app-id=aohghmighlieiainnegkcijnfilokake %F&#xA;Icon=chrome-aohghmighlieiainnegkcijnfilokake-Default&#xA;StartupWMClass=crx_aohghmighlieiainnegkcijnfilokake&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;Right-click on the file you want to open in &lt;em&gt;Files&lt;/em&gt;, select &lt;em&gt;Open with&lt;/em&gt;, look for you application and assign it as default (or leave it as an option in the context menu, as wanted).&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-08T15:28:38.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9608" PostTypeId="2" ParentId="9606" CreationDate="2016-12-08T15:34:42.753" Score="1" Body="&lt;p&gt;Most apps are in the AppCenter (the icon with a down arrow). Just open it and use the search function to find the app you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure what you did but you can delete those files you've downloaded. Both apps, Firefox and Libreoffice are in the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-08T15:34:42.753" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9609" PostTypeId="2" ParentId="9605" CreationDate="2016-12-08T16:31:06.387" Score="2" Body="&lt;p&gt;First, check what drivers are avaliable for your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers devices | grep -o nvidia-[[:digit:]]*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install the one you want (replace XXX with the correct number):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-XXX &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you have Optimus Technology you would also want to install this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you want to fine tune your settings, is recommended to install &lt;code&gt;nvidia-settings&lt;/code&gt; as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-08T16:31:06.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9610" PostTypeId="1" CreationDate="2016-12-08T18:07:57.057" Score="6" ViewCount="656" Body="&lt;p&gt;I just installed ElementaryOS on my Macbook Air, and so far I'm liking it. There is one thing which really annoys me though. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Ubuntu (or OSX) when I'm on a large website or in a large text document and I want to scroll to the end (or somewhere in the middle), I simply scroll very fast with two fingers so that when my fingers leave the touchpad it keeps on scrolling until I reached the point that I want.&#xA;When I do this in ElementaryOS it stops scrolling when my fingers leave the touchpad, which means I need to scroll a zillion times to get to the point of my interest.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I do this all the time during my work it is really a must for me to have.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to somehow make ElementaryOS mimic this behavior so that I don't need to scroll so many times to get to the point I'm interested in within the document? All tips are welcome!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps. I just tested scrolling on the same Macbook with Ubuntu 16.04. The scrolling on Ubuntu is not smooth at all, but it does keep on scrolling when my fingers let go of the touchpad, just like in OSX, which suggests it is somehow possible.&lt;/p&gt;&#xA;" OwnerUserId="7714" LastEditorUserId="7714" LastEditDate="2016-12-27T16:47:35.870" LastActivityDate="2018-12-18T14:01:55.350" Title="Touchpad fast scroll possible?" Tags="|touchpad|mouse|macbook|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9612" PostTypeId="1" CreationDate="2016-12-08T19:46:51.147" Score="0" ViewCount="468" Body="&lt;p&gt;i am using elementary os after installing pia from &quot;&lt;a href=&quot;https://helpdesk.privateinternetaccess.com/hc/en-us/articles/219438217-Installing-the-PIA-App-on-Linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://helpdesk.privateinternetaccess.com/hc/en-us/articles/219438217-Installing-the-PIA-App-on-Linux&lt;/a&gt;&quot; nether i am seeing any icon beside the clock as said on web page nor i am able to connect what should i do&lt;/p&gt;&#xA;" OwnerUserId="7717" LastActivityDate="2017-03-24T16:24:25.783" Title="how to connect with pia" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-01T21:15:27.037" ContentLicense="CC BY-SA 3.0" />
  <row Id="9614" PostTypeId="1" AcceptedAnswerId="9615" CreationDate="2016-12-08T21:01:27.177" Score="4" ViewCount="444" Body="&lt;p&gt;I'm trying out elementary OS 0.4 Loki and so far I could install everything I wanted via PPA or an official Ubuntu .deb package without any problems.&#xA; App Center isn't a great help so far... is there any documentation how AppCenter is different or better to Gnome Software what are the pros of AppCenter?&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="13575" LastEditDate="2018-02-09T23:39:13.523" LastActivityDate="2018-02-09T23:39:13.523" Title="How is Gnome Software different to AppCenter?" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9615" PostTypeId="2" ParentId="9614" CreationDate="2016-12-08T21:32:51.187" Score="1" Body="&lt;p&gt;I do not use AppCenter either. It's so buggy but good for update packages. When apt and synaptic works great there is no problem for me. I think there is no advantage at all, but it will be a cool tool in future. It is Ubuntu software center alternative designed according to OS design pattern. It is good to have it but without any bug.&lt;/p&gt;&#xA;" OwnerUserId="7720" LastActivityDate="2016-12-08T21:32:51.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9616" PostTypeId="2" ParentId="9606" CreationDate="2016-12-08T21:52:55.900" Score="1" Body="&lt;p&gt;Are you new to Linux? If you are then you should learn how to install software in Linux. Since elementary is derived from Ubuntu then just google how to install bla in Ubuntu. Installing libreoffice and firefox is so easy. You can find them in repository by typing &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in terminal. Just learn how to use apt and you are master. &lt;/p&gt;&#xA;" OwnerUserId="7720" LastActivityDate="2016-12-08T21:52:55.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9617" PostTypeId="1" AcceptedAnswerId="9626" CreationDate="2016-12-09T00:56:09.743" Score="3" ViewCount="323" Body="&lt;p&gt;I'm new to Elementary (though not to Linux) and really enjoying it so far. One thing I find annoying though is the case insensitive tab completion in the terminal/shell - I can see how it might be newbie friendly but I find it annoying :-) Is there a way to turn it off?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;Andrew&lt;/p&gt;&#xA;" OwnerUserId="7722" LastEditorUserId="7722" LastEditDate="2016-12-09T11:19:36.200" LastActivityDate="2016-12-09T11:20:09.973" Title="Case sensitive tab completion" Tags="|pantheon-terminal|bash|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9619" PostTypeId="1" CreationDate="2016-12-09T02:35:53.373" Score="0" ViewCount="31" Body="&lt;p&gt;I m a beginner to elementary  and while installing it I chose to install it on my e drive .Now I m not getting any of the partition that I had on my windows like d or c drive nor i can see the files that were in it . When in terminal I type the name of drive (like dev/sda1), it shows no such directory found . Please help me as those were some important files. &lt;/p&gt;&#xA;" OwnerUserId="7724" LastActivityDate="2016-12-09T08:24:37.727" Title="How to get my partition back" Tags="|hardware|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9620" PostTypeId="2" ParentId="9606" CreationDate="2016-12-09T03:23:49.997" Score="1" Body="&lt;p&gt;Not a stupid question at all! It sounds like two things are going on here:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;AppCenter isn't working properly. It should list a wide variety of apps, including LibreOffice and Firefox. See &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7533/no-software-is-shown-in-appcenter-except-what-is-installed&quot;&gt;this question&lt;/a&gt; for a fix and &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1615270&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug ticket&lt;/a&gt; for details on the underlying problem.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Ubuntu apps are often distributed outside the AppCenter in .deb packages. elementary OS doesn't come with a way to install .deb packages. This is by design, and in most cases installing an app from the AppCenter is simpler and more reliable than installing the same app from a .deb package. That said, you can install .deb packages by following &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7542/how-can-i-install-deb-files-in-loki&quot;&gt;these instructions&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-09T03:23:49.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9621" PostTypeId="2" ParentId="9598" CreationDate="2016-12-09T07:27:18.107" Score="1" Body="&lt;p&gt;It may be due to kernel issues. Try to boot with an older kernel from grub menu as below.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Select Advanced options for elementary os&lt;/li&gt;&#xA;&lt;li&gt;Select the kernel which u think is suitable&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If that works, you can remove the new kernel while retaining the older one. But be sure to check which kernel u currently using by&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;uname -r&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and try not mess with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove kernel, replace X.XX.X-XX with kernel version as below&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt purge linux-image-X.XX.X-XX-generic linux-image-extra-X.XX.X-X-generic linux-headers-X.XX.X-XX linux-headers-X.XX.X-XX-generic&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then update the grub&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Reboot ur system.&lt;/p&gt;&#xA;" OwnerUserId="5946" LastActivityDate="2016-12-09T07:27:18.107" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9622" PostTypeId="1" CreationDate="2016-12-09T07:48:30.640" Score="2" ViewCount="1769" Body="&lt;p&gt;Is there a known issue with Elementary OS and Virtualbox? I searched here but didn't find anything this specifically or recent. Does it run well natively? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Context:&#xA;I was deciding whether I would install Ubuntu GNOME or Elementary OS on my machine, so I ran both on Virtualbox. And Elementary is absolutely awful there. &#xA;I gave it 8gb of ram and it's quite slow. So buggy, stuff just stop working after a while.&#xA;Since the OS gets a lot of praise I assume it's not like that. I'm asking so I decide if worth the trouble installing it.&lt;/p&gt;&#xA;" OwnerUserId="7706" LastActivityDate="2016-12-09T16:10:28.530" Title="Does Elementary run smoothly natively? [Slow and Buggy on Virtualbox]" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9623" PostTypeId="2" ParentId="9619" CreationDate="2016-12-09T08:24:37.727" Score="1" Body="&lt;p&gt;Your old partitions should show up in the &lt;em&gt;Files&lt;/em&gt; file manager under &lt;em&gt;Devices&lt;/em&gt;. You can click on them to mount them and access the files on these partitions.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-09T08:24:37.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9625" PostTypeId="1" CreationDate="2016-12-09T10:26:40.633" Score="2" ViewCount="1786" Body="&lt;p&gt;I can't seem to find where to change the lockscreen time format. Currently its displaying AM+PM clock, whilst my system is set to use English British and my Date+Time is set to 24h (Its displaying correctly in the system it self). In the gnome desktop environment there is an option to change the login screen settings inside &quot;Region and Language&quot;, but I can't seem to find it anywhere within Elementary Loki. Any tips? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="7726" LastActivityDate="2016-12-09T10:26:40.633" Title="Lockscreen Clock Format?" Tags="|settings|greeter|clock|" AnswerCount="0" CommentCount="2" ClosedDate="2019-04-16T06:22:52.073" ContentLicense="CC BY-SA 3.0" />
  <row Id="9626" PostTypeId="2" ParentId="9617" CreationDate="2016-12-09T11:20:09.973" Score="4" Body="&lt;p&gt;And of course as soon as I ask I find the answer - set completion-ignore-case off in /etc/inputrc&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(from &lt;a href=&quot;https://askubuntu.com/questions/87061/can-i-make-tab-auto-completion-case-insensitive-in-the-terminal&quot;&gt;https://askubuntu.com/questions/87061/can-i-make-tab-auto-completion-case-insensitive-in-the-terminal&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="7722" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-12-09T11:20:09.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9627" PostTypeId="2" ParentId="9622" CreationDate="2016-12-09T16:10:28.530" Score="2" Body="&lt;p&gt;There is some outstanding issue with VirtualBox hardware acceleration not working properly for 3D rendering. This has been known to cause significant performance issues, and is not representative of normal installs.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2016-12-09T16:10:28.530" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9628" PostTypeId="1" CreationDate="2016-12-09T18:37:47.423" Score="3" ViewCount="5082" Body="&lt;p&gt;There have been a lot of questions that are similar in nature, but none can truly address the Issues I've been having. I have a Dell XPS 15 9550 and have pretty much all of the hardware on it supported by manually upgrading the kernel. Yay!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop has a 15 inch 4K display and elementary OS handles it quite well by automatically scaling up everything in Pantheon Desktop. However, it falls short when working with external displays. Any external display that I connect will inherit the same HiDPI setting that my laptop display uses. This means that windowed programs like system settings are scaled up and consume nearly the entire screen of a 27 inch 1440p display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to keep the HiDPI settings on my laptop screen but then have a different HiDPI setting on my external displays. I want to make better use of the screen's real estate for my work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Through my research, I have found that I can use &lt;code&gt;xrandr&lt;/code&gt; to modify the HiDPI Settings on my screens and I have found what I think is an ideal configuration to solve my problem.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output HDMI1 --scale 2x2 --mode 2560x1440 --fb 5120x3600 --pos 0x0&#xA;xrandr --output eDP1 --scale 1x1 --pos 600x3600&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it only works momentarily, then something happens in either the nouveau video driver that elementary OS uses by default, or with Pantheon Desktop. The screen goes black, I see some terminal output on my laptop, then the elementary OS login prompt appears and when I login, all my applications that were previously open are closed. Most importantly, all of the changes I made to the displays through &lt;code&gt;xrandr&lt;/code&gt; have been reverted back to how it was to begin with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to be able to adjust the scaling settings of my displays with out my system becoming unstable. My plans are to eventually write a bash script that will configure my displays for me. But right now something is making my early attempts fail. Does anyone have any ideas on how I can change the scale settings on individual monitors in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="5203" LastEditorUserId="308" LastEditDate="2018-08-07T17:05:36.577" LastActivityDate="2018-08-07T17:05:36.577" Title="How Do I Set HiDPI Scaling for individual displays on elementary OS Loki?" Tags="|display|hidpi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9629" PostTypeId="2" ParentId="9628" CreationDate="2016-12-09T19:21:47.567" Score="0" Body="&lt;p&gt;maybe you can save your config as shell script with &lt;a href=&quot;https://christian.amsuess.com/tools/arandr/&quot; rel=&quot;nofollow noreferrer&quot;&gt;arand&lt;/a&gt;&#xA;I would try this first because it should work with the  Nouveau driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I normally use the nvidia-binary drivers and configure my screen with th nvidia-settings tool look here for infos about the drivers:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia&quot; rel=&quot;nofollow noreferrer&quot;&gt;ubuntu nvidia-binary-drivers&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theres an official PPA for binary nvidia drivers xou can install it with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After you switched to the proprietary drivers you can install the nvidia-settings tool with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With this tool you can manage all monitor settings and save them. &lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="7751" LastEditDate="2017-02-27T09:49:58.750" LastActivityDate="2017-02-27T09:49:58.750" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9630" PostTypeId="1" CreationDate="2016-12-09T21:29:25.943" Score="1" ViewCount="1011" Body="&lt;p&gt;I downloaded elementary two days ago, and some things have been doing even stranger things to my 2014 macbook air.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;My fan stopped working&#xA;My computer will not break a sweat, even under the largest loads. It will get really really hot and just throttle.&lt;/li&gt;&#xA;&lt;li&gt;It won't sleep properly&#xA;Now I have to charge my computer when left unattended, because if I don't it will just lock me out. It won't even turn the screen off when I shut the lid.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;So, if any of you have the same problem, or are looking fix it, please offer help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Arence&lt;/p&gt;&#xA;" OwnerUserId="7734" LastActivityDate="2017-08-08T11:59:50.800" Title="Elementary make my laptop's fans stop working" Tags="|macbook|laptop|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9631" PostTypeId="1" CreationDate="2016-12-09T21:35:33.107" Score="2" ViewCount="65" Body="&lt;p&gt;I would like like to know what are the most annoying bugs in elementary os are right now and how can I contribute to elemtary os to help others get rid off these bugs.&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="578" LastEditDate="2016-12-09T21:46:48.310" LastActivityDate="2016-12-09T21:46:48.310" Title="How can I contribute to fixing bugs in elementary OS?" Tags="|release-loki|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9633" PostTypeId="2" ParentId="9631" CreationDate="2016-12-09T21:42:49.367" Score="2" Body="&lt;p&gt;The page &lt;a href=&quot;https://elementary.io/get-involved#desktop-development&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved#desktop-development&lt;/a&gt; has two links:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementary/+bugs?orderby=-importance&amp;amp;field.status%3Alist=CONFIRMED&amp;amp;field.status%3Alist=TRIAGED&amp;amp;field.tag=bitesize&amp;amp;field.omit_dupes=on&amp;amp;field.has_branches=on&amp;amp;field.has_no_branches=on&amp;amp;field.has_blueprints=on&amp;amp;field.has_no_blueprints=on&amp;amp;search=Search&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Bitesized bugs&quot;&gt;Bitesized bugs&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementary/+bugs?orderby=-importance&amp;amp;field.status%3Alist=CONFIRMED&amp;amp;field.status%3Alist=TRIAGED&amp;amp;field.tag=bounty&amp;amp;field.omit_dupes=on&amp;amp;field.has_branches=on&amp;amp;field.has_no_branches=on&amp;amp;field.has_blueprints=on&amp;amp;field.has_no_blueprints=on&amp;amp;search=Search&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Bountied bugs&quot;&gt;Bountied bugs&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Anyway you can find elementary OS bugs on Launchpad: &lt;a href=&quot;https://bugs.launchpad.net/elementary/+bugs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementary/+bugs&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-09T21:42:49.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9636" PostTypeId="1" AcceptedAnswerId="9639" CreationDate="2016-12-10T00:11:54.373" Score="0" ViewCount="258" Body="&lt;p&gt;I tried to install f-spot, but apt says there is no installation candidate for f-spot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install f-spot&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;&#xA;Package f-spot is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;E: Package 'f-spot' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="5274" LastActivityDate="2016-12-10T07:47:38.903" Title="Install f-spot - no installation candidate" Tags="|apt|aptitude|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9637" PostTypeId="2" ParentId="8882" CreationDate="2016-12-10T01:45:33.553" Score="1" Body="&lt;p&gt;This adapter is compatible with the &lt;code&gt;rtl8192eu&lt;/code&gt; driver, you can install it with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install git&#xA;git clone https://github.com/jeremyb31/rtl8192eu-linux-driver&#xA;cd rtl8192eu-linux-driver&#xA;make&#xA;sudo make install&#xA;sudo modprobe 8192eu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7741" LastEditorUserId="578" LastEditDate="2017-10-17T06:17:07.113" LastActivityDate="2017-10-17T06:17:07.113" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9639" PostTypeId="2" ParentId="9636" CreationDate="2016-12-10T07:47:38.903" Score="0" Body="&lt;p&gt;You cannot install f-spot this way any more, because it has been dropped from recent software distributions (as of 2014 or 2012). Cf. &lt;a href=&quot;http://packages.ubuntu.com/f-spot&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.ubuntu.com/f-spot&lt;/a&gt; and &lt;a href=&quot;https://packages.debian.org/f-spot&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.debian.org/f-spot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;The most recent version of F-Spot is 0.8.2, released December 19, 2010.&quot; – on &lt;a href=&quot;http://f-spot.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;f-spot.org&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-10T07:47:38.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9640" PostTypeId="2" ParentId="9599" CreationDate="2016-12-10T07:57:07.270" Score="1" Body="&lt;p&gt;There is no problem with 1,5k lines in the syslog at startup, it can be absolutely normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there might be some errors that cause slow startup indeed, for finding them you should look more for the time stamps and the log contents (than to the amount of information logged).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking at your log, it might be the wireless connection or the mount of a remote network drive that takes some more time than usual. &lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-10T07:57:07.270" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9641" PostTypeId="1" AcceptedAnswerId="9645" CreationDate="2016-12-10T09:21:40.010" Score="1" ViewCount="2141" Body="&lt;p&gt;Brand new computer with SSD and most of the times the system boots really fast, but other times it doesn't. I enter my password and then wait solid minute and a half. I tried to see if there is any pattern, but I am not doing anything specific at those times. DO you have any idea what could be causing the issue ? Is there a way for me to check why it boots so slow ? (preferably using tools that are already in the system and no installation is needed)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I ran the command suggested by the accepted answer I got the following info :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The kernel is booting from 0 to 2.5 secs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The rest of the files are booting from 2.5 to 3.2 secs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Something called ureadahead.service is deactivating for solid 8 seconds. What could be the cause ? &lt;/p&gt;&#xA;" OwnerUserId="7537" LastEditorUserId="7537" LastEditDate="2016-12-12T07:53:27.283" LastActivityDate="2016-12-12T07:53:27.283" Title="Sometimes the system boots slow" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9642" PostTypeId="1" CreationDate="2016-12-10T10:24:20.440" Score="1" ViewCount="80" Body="&lt;p&gt;I have an amazing problem (that's why we love eOS !).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I plug an USB in my laptop, He don't reconize it (in lsusb too).&#xA;If I plug an USB BEFORE loggin, it's reconized (only once, if I eject my USB I must relog to mount it again).&#xA;Of course, it's not a hardware problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I can do ?&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-12-10T10:24:20.440" Title="No USB when already logged" Tags="|release-loki|usb-drive|mount|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9644" PostTypeId="2" ParentId="8956" CreationDate="2016-12-10T10:32:27.487" Score="3" Body="&lt;p&gt;Same issue. Currently I go to dock preference (&lt;kbd&gt;ctrl&lt;/kbd&gt; + Right Click), comportment, and I disable/enable Show unpinned.&#xA;But it's not a solution of course.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's boring but it's work (or &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;)&lt;/p&gt;&#xA;" OwnerUserId="7285" LastEditorUserId="16827" LastEditDate="2019-02-06T13:37:19.970" LastActivityDate="2019-02-06T13:37:19.970" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9645" PostTypeId="2" ParentId="9641" CreationDate="2016-12-10T12:29:54.427" Score="2" Body="&lt;p&gt;If you have Intel Graphics that was a bug and it was solved already so doing &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&lt;/code&gt; is going to fix it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check your boot time you can use &lt;code&gt;systemd-analyze&lt;/code&gt;.&lt;br&gt;&#xA;To know what is making your boot time slow, use instead &lt;code&gt;systemd-analyze critical-chain&lt;/code&gt;. The ones that appear in red are holding up your boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly you can use &lt;code&gt;systemd-analyze plot &amp;gt; boot&lt;/code&gt; to create a file inside your home directory and check all packages involved in your boot.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;NOTE: This only works on Loki or newer.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-10T12:29:54.427" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="9646" PostTypeId="2" ParentId="9498" CreationDate="2016-12-10T12:53:08.800" Score="12" Body="&lt;p&gt;Had same problem - in the end fixed using &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt; from a hint provided when trying &lt;code&gt;sudo apt-get update&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4860" LastActivityDate="2016-12-10T12:53:08.800" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9648" PostTypeId="1" CreationDate="2016-12-10T13:35:04.037" Score="0" ViewCount="147" Body="&lt;p&gt;There is a strange wingpanel behaviour. When I want to select an option above in any application I can't. &lt;a href=&quot;https://i.stack.imgur.com/6OpTW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6OpTW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &#xA;Options disappear!! &lt;a href=&quot;https://i.stack.imgur.com/sL3gz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sL3gz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; and I don't know how to solve it. Please I need help.&lt;/p&gt;&#xA;" OwnerUserId="7743" LastEditorUserId="6398" LastEditDate="2016-12-10T15:02:51.687" LastActivityDate="2016-12-10T21:56:23.683" Title="Wingpanel Error" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9649" PostTypeId="1" CreationDate="2016-12-10T14:22:47.973" Score="0" ViewCount="2459" Body="&lt;p&gt;I'm new to linux, and my problem is that when i pass with the cursor hover certain things(like the bar on the top) it starts glitching. I read around the internet that i need to install nvidia card driver, i did that but once installed when i tried to run the OS nothing appeared, black screen. Then i just did a fresh installation of the OS. I tried also to install bumblebee but nothing changed, so want to ask you if there is any way to install this driver and stop my cursor glitching.&lt;/p&gt;&#xA;" OwnerUserId="7744" LastActivityDate="2017-01-09T19:07:49.263" Title="How to install NVidia card driver (laptop)?" Tags="|nvidia|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9650" PostTypeId="2" ParentId="9649" CreationDate="2016-12-10T16:02:47.390" Score="0" Body="&lt;p&gt;Hi first check wich nvidia-driver you need for 0.4 Loki wich is based on Ubuntu 16.04 there are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current official release: &lt;code&gt;nvidia-370&lt;/code&gt; (370.28)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current long-lived branch release: &lt;code&gt;nvidia-367&lt;/code&gt; (367.57)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For GeForce 8 and 9 series GPUs use &lt;code&gt;nvidia-340&lt;/code&gt; (340.98)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For GeForce 6 and 7 series GPUs use &lt;code&gt;nvidia-304&lt;/code&gt; (304.132)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First add the PPA:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Get bumblebee via ppa:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:neon1ks/bumblebee&lt;/code&gt;&#xA;&lt;code&gt;sudo apt-get update&lt;/code&gt;&#xA;&lt;code&gt;sudo apt-get install bumblebee&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install the driver with bumblebee and nvidia-setting the config tool from nvidia heres an example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install nvidia-370 nvidia-settings bumblebee bumblebee-nvidia primus&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a howto install nvidia-drivers with the terminal:&#xA;&lt;a href=&quot;https://linuxconfig.org/how-to-install-the-latest-nvidia-drivers-on-ubuntu-16-04-xenial-xerus&quot; rel=&quot;nofollow noreferrer&quot;&gt;&#xA;How to install the latest Nvidia drivers on Ubuntu 16.04 Xenial Xerus&#xA;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastEditorDisplayName="user7713" LastEditDate="2016-12-10T18:42:17.757" LastActivityDate="2016-12-10T18:42:17.757" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9651" PostTypeId="1" CreationDate="2016-12-10T16:34:24.710" Score="0" ViewCount="132" Body="&lt;p&gt;When I restart holding the option key I do get the Windows DVD (Elementary) boot option, all is normal. When I select it the process starts loading from DVD and hangs with a message   &lt;code&gt;(&lt;/code&gt;1.&#xA;                       2.&#xA;                       Select CD-ROM Boot Type : &lt;code&gt;)&lt;/code&gt;&#xA;Keyboard is lock out, the only option is to power off.&#xA;I tried the DVD on a Macbook Air running Maverick, worked fine.&lt;/p&gt;&#xA;" OwnerUserId="7746" LastActivityDate="2024-04-06T10:05:05.587" Title="boot disk will not load on my Core 2 Duo osx 10.6.8" Tags="|macintosh|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9652" PostTypeId="2" ParentId="9651" CreationDate="2016-12-10T17:18:16.727" Score="0" Body="&lt;p&gt;Maybe the DVD is defect.. do you have an usb-stick wich you could format with the Mac? You could use a tool like &lt;a href=&quot;https://unetbootin.github.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;UNetbootin&lt;/a&gt; to create an bootable USB-Stick with the elementary iso file instead of using the DVD.&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-10T17:18:16.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9653" PostTypeId="2" ParentId="9630" CreationDate="2016-12-10T17:28:07.710" Score="0" Body="&lt;p&gt;On my Mac Mini i use mbpfan under Kubuntu its by far the best solution I know to get fans correctly working on Macs. It's not easy to setup but heres an tutorial to get it working an a Mac:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ineed.coffee/3838/a-beginners-tutorial-for-mbpfan-under-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;a-beginners-tutorial-for-mbpfan-under-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-10T17:28:07.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9654" PostTypeId="2" ParentId="9649" CreationDate="2016-12-10T17:49:07.853" Score="-1" Body="&lt;p&gt;First add the PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to Application in the top left corner of the screen and search for &quot;software&quot; and select &quot;software &amp;amp; applications&quot;. Then go to the &quot;Additional Drivers&quot; tab and select Nvidia drivers. Apply the change and restart the computer. You might need to restart AND login to the computer once to remove any errors that might occur, I had a black left screen but then I logged in and it fixed itself after about 8 seconds.&lt;/p&gt;&#xA;" OwnerUserId="7747" LastActivityDate="2016-12-10T17:49:07.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9656" PostTypeId="2" ParentId="9649" CreationDate="2016-12-10T18:08:20.543" Score="4" Body="&lt;p&gt;I don't recommend you to add any PPA to install your graphics driver. If you want a stable system, stick to the official repos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could use bumblebee to switch between graphics card for some apps, but it's harder to configure than &lt;code&gt;nvidia-prime&lt;/code&gt; so I don't recommend bumblebee unless you want a fully open source installation (both the nvidia driver and nvidia-prime are proprietary software). If this is the case, I'll update my answer. But for now, I'll explain a more basic config:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First Delete everything related to bumblebee: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove bumblebee bumblebee-nvidia primus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check what drivers are avaliable for your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers devices | grep -o nvidia-[[:digit:]]*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install the one you want (replace XXX with the correct number):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-XXX &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you have Optimus Technology you would also want to install this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you want to fine tune your settings, is recommended to install &lt;code&gt;nvidia-settings&lt;/code&gt; as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-10T18:08:20.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9657" PostTypeId="1" AcceptedAnswerId="9664" CreationDate="2016-12-10T21:55:19.263" Score="1" ViewCount="1392" Body="&lt;p&gt;Is there any way to install ROS on Elementary OS Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found on the internet a tutorial step by step for Freya, but I only managed to have installable packages with dependency problems :/&lt;/p&gt;&#xA;" OwnerUserId="7532" LastEditorUserId="578" LastEditDate="2016-12-11T07:55:23.693" LastActivityDate="2016-12-11T18:29:11.660" Title="ROS (Robot Operating System) for elementary OS Loki" Tags="|release-loki|software-installation|repositories|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9658" PostTypeId="2" ParentId="9648" CreationDate="2016-12-10T21:56:23.683" Score="1" Body="&lt;p&gt;You seem to have some globalmenu indicator installed. This is not officially supported and can lead to issues which you seem to have.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-12-10T21:56:23.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9661" PostTypeId="1" AcceptedAnswerId="9666" CreationDate="2016-12-11T00:31:59.247" Score="1" ViewCount="140" Body="&lt;p&gt;When I place mouse over Calculator icon inside the 'Applications' menu it says &quot;Solve simple equations&quot;. So I assume this can be done somehow. I tried these expressions.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;solve(x=2x+3)&#xA;x=2x+3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It says &quot;'solve' is invalid&quot;, &quot;'x' is invalid&quot; etc. &lt;/p&gt;&#xA;" OwnerUserId="7149" LastEditorUserId="7149" LastEditDate="2016-12-11T00:41:44.677" LastActivityDate="2016-12-11T09:43:42.387" Title="How to solve equations in Calculator?" Tags="|applications|calculator|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9662" PostTypeId="2" ParentId="9661" CreationDate="2016-12-11T01:18:43.980" Score="2" Body="&lt;p&gt;It's not possible to evaluate algebraic expressions with Calculator&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-11T01:18:43.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9663" PostTypeId="2" ParentId="9661" CreationDate="2016-12-11T07:51:26.387" Score="0" Body="&lt;p&gt;It's not possible, but there is lot of other tools for that. for exemple, a simple website &lt;a href=&quot;http://www.wolframalpha.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-12-11T07:51:26.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9664" PostTypeId="2" ParentId="9657" CreationDate="2016-12-11T07:54:27.590" Score="0" Body="&lt;p&gt;Based on the tutorial suggested by Maccer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Setup your sources.list&#xA;sudo sh -c 'echo &quot;deb http://packages.ros.org/ros/ubuntu xenial main&quot; &amp;gt; /etc/apt/sources.list.d/ros-latest.list'&#xA;# Set up your keys&#xA;sudo apt-key adv --keyserver hkp://ha.pool.sks-keyservers.net:80 --recv-key 5523BAEEB01FA116&#xA;# Install the package(s) wanted.&#xA;sudo apt update&#xA;sudo apt install ros-kinetic-desktop-full&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2016-12-11T13:20:19.343" LastActivityDate="2016-12-11T13:20:19.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9665" PostTypeId="1" AcceptedAnswerId="9669" CreationDate="2016-12-11T09:11:43.817" Score="0" ViewCount="97" Body="&lt;p&gt;Is there a way to make audience video player not remember the last-played video. Specifically, how to make the &lt;code&gt;current-video&lt;/code&gt; attribute of audience set to a constant blank so it doesn't remember the last video you played the next time you open it. I can do that manually through &lt;code&gt;dconf-editor&lt;/code&gt; but i don't want to do it every time i play a video.&lt;/p&gt;&#xA;" OwnerUserId="6001" LastActivityDate="2016-12-11T16:16:43.873" Title="Audience video player last played video" Tags="|release-freya|audience|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9666" PostTypeId="2" ParentId="9661" CreationDate="2016-12-11T09:43:42.387" Score="5" Body="&lt;p&gt;You can use NaSC, an application made by &lt;a href=&quot;https://plus.google.com/116373568615209021512/posts&quot; rel=&quot;noreferrer&quot;&gt;Peter A&lt;/a&gt; for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5w8hA.jpg&quot; alt=&quot;NaSC&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info at &lt;a href=&quot;http://parnold-x.github.io/nasc/&quot; rel=&quot;noreferrer&quot;&gt;NaSC webpage &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2016-12-11T09:43:42.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9669" PostTypeId="2" ParentId="9665" CreationDate="2016-12-11T16:16:43.873" Score="1" Body="&lt;p&gt;&lt;strong&gt;Actually this is a feature, not a bug.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However if you do not need it, you might want to implement some sort of solution to reset it. Some alternatives depending on your exact needs follow.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You might want to start Audience from a wrapper script that resets&#xA;the &lt;code&gt;org.pantheon.audience.current-video&lt;/code&gt; value just after quitting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;/usr/bin/audience&#xA;dconf reset /org/pantheon/audience/current-video&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You might want to install a cronjob to reset it regularly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;@hourly     dconf reset /org/pantheon/audience/current-video&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You might to want to implement a sort of watchdog that monitors it and resets it if it's not empty etc.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-11T16:16:43.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9670" PostTypeId="1" AcceptedAnswerId="9677" CreationDate="2016-12-11T17:12:48.883" Score="0" ViewCount="19301" Body="&lt;p&gt;I go to the &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary OS page&lt;/a&gt; and it forces me to donate before I can download.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I download it free to try out?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Yes and No it's not a duplicate. There is problem with the way the other question is asked. The very first time a person goes to this webpage will not be thinking they need to 're download it for free'. So, it's unlikely they will find the answer via an intuitive search. My question actual gets right to the point, which makes it more likely they will find the solution. Perhaps the best thing would be to add a button to allow a free download so people are not confused in the first place. But until then, my question will most likely turn up for someone with this issue vs. the other question. I believe it makes the forum cleaner and more helpful.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="7199" LastEditorUserId="7199" LastEditDate="2016-12-11T17:51:32.853" LastActivityDate="2020-02-16T17:07:58.013" Title="How do I download Elementary OS for free?" Tags="|elementary-website|download|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-19T01:55:51.823" ContentLicense="CC BY-SA 3.0" />
  <row Id="9671" PostTypeId="2" ParentId="9657" CreationDate="2016-12-11T18:29:11.660" Score="0" Body="&lt;p&gt;I solved the problem just following the shadow-fixed instructions and changing in /etc/apt/sources.list.d/ros-latest.list ros for ros-shadow-fixed. After that when I install ros-kinetic-desktop-full (not ros-kinetic-my-just-released-package!) it does not give me error anymore. &lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-11T18:29:11.660" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9672" PostTypeId="1" AcceptedAnswerId="9683" CreationDate="2016-12-11T18:59:59.737" Score="2" ViewCount="6122" Body="&lt;p&gt;I'm planning to buy a HP Pavilion X2 - 2 in 1 laptop.&#xA;It comes by default with Windows 10 - which is the system that convinced me to switch for Elementary ;)  - so naturally I'd like to work on Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I'm not sure if it's possible to use it as 'tablet' (It's still Computer, but with touch screen only). &#xA;Is it possible to integrate Elementary with touch screen? If es then how? :)&#xA;I saw on youtube that someone did it with touchegg, but I've never used it before.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2018-09-23T02:31:49.300" Title="Elementary on 2 in 1 laptops - Touch screen" Tags="|laptop|software-recommendation|hp|touchscreen|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9673" PostTypeId="1" CreationDate="2016-12-11T20:10:08.473" Score="2" ViewCount="466" Body="&lt;p&gt;I am pretty much a newbie with Elementary OS. I really like it so far. It's made my old MacBook fast and pretty stable again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All my hardware works apart from pinch to zoom on my trackpad. Does Loki support this out of the box, or do I have to set it up myself?&lt;/p&gt;&#xA;" OwnerUserId="7757" LastActivityDate="2017-08-09T07:07:36.383" Title="Pinch to zoom not working on MacBook Air Mid 2011 running Elementary OS Loki" Tags="|release-loki|touchpad|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9674" PostTypeId="2" ParentId="9673" CreationDate="2016-12-11T20:31:37.603" Score="0" Body="&lt;p&gt;You'll need to install Touchegg&#xA;Look here for instructions:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/167/how-can-i-enable-multi-touch-gestures-on-a-laptop-trackpad&quot;&gt;How can I enable multi-touch gestures on a laptop trackpad?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There also an GUI for it: &lt;a href=&quot;https://github.com/Raffarti/Touchegg-gce&quot; rel=&quot;nofollow noreferrer&quot;&gt;Touchegg-gce&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theres also another forum thread about it:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1198/setting-up-os-x-style-multi-touch-gestures-on-elementary-os&quot;&gt;setting-up-os-x-style-multi-touch-gestures-on-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-11T20:31:37.603" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9675" PostTypeId="1" CreationDate="2016-12-11T20:45:55.163" Score="1" ViewCount="412" Body="&lt;p&gt;On Live CD everything works well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But after installation and several system updates via &lt;code&gt;AppCenter&lt;/code&gt; &lt;code&gt;Wireless&lt;/code&gt; has become unstable (drops connection) and &lt;code&gt;Wired&lt;/code&gt; doesn't work although I returned to &lt;code&gt;4.4.0-38-generic&lt;/code&gt; kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wonder that how can I get worked my Elementary OS like Elementary OS Live?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm struggled with this issue for days. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would be appreciated for any help.  &lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2017-04-10T23:33:34.237" Title="Wired and Wireless issue" Tags="|system|wifi|networking|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9676" PostTypeId="2" ParentId="9675" CreationDate="2016-12-11T21:03:41.230" Score="1" Body="&lt;p&gt;Hi out if the blue its difficult to give help here.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Would you please run the commad&#xA;&lt;code&gt;ifconfig&lt;/code&gt; in the terminal and look in the output for en0 for example to see if the wired connection works.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Theres another thread with this issue maybe it helps:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4183/how-can-i-fix-networking-wi-fi-and-ethernet-not-being-available-after-update&quot;&gt;How can I fix Networking, Wi-Fi and Ethernet, not being available after update?&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For more details on Network configuration heres a guide from Ubuntu:&#xA;&lt;a href=&quot;https://help.ubuntu.com/lts/serverguide/network-configuration.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu - Network Configuration&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2016-12-11T21:03:41.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9677" PostTypeId="2" ParentId="9670" CreationDate="2016-12-11T21:04:08.420" Score="1" Body="&lt;p&gt;In the button &quot;Custom&quot; write 0 then click &quot;Purchase elementary OS&quot;, then &quot;Download&quot;. The download will start without problem and without asking you any money!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be great to download it via bitorrent and seed for awhile, since you're not paying.&lt;/p&gt;&#xA;" OwnerUserId="6614" LastEditorUserId="-1" LastEditDate="2020-02-16T17:07:58.013" LastActivityDate="2020-02-16T17:07:58.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9678" PostTypeId="1" CreationDate="2016-12-11T21:17:04.577" Score="1" ViewCount="120" Body="&lt;p&gt;After a recent update, I can't search with the application launcher search bar anymore using the keyboard, because it won't accept input from the keyboard. Interestingly enough, I can type words elsewhere and paste it into the search bar, but I can't type directly in the search bar. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way I can fix this issue?&lt;/p&gt;&#xA;" OwnerUserId="7758" LastActivityDate="2016-12-19T19:15:02.653" Title="Slingshot search not working (not accepting keyboard input)" Tags="|release-loki|slingshot|launcher|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9679" PostTypeId="1" CreationDate="2016-12-11T21:39:35.043" Score="1" ViewCount="697" Body="&lt;p&gt;My laptop has a built-in camera that's always being used by the Snap. If I plug a USB camera I can't switch to this one no matter what I do. Is it possible at all? I don't see any menu on Snap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried with other camera apps like &lt;code&gt;cheese&lt;/code&gt; and I can switch in there but the change only affects that app and not Snap. I'm using Loki Stable, by the way.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-11T22:03:14.800" Title="Is it possible to use an USB webcam with Snap?" Tags="|usb|webcam|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9680" PostTypeId="2" ParentId="9679" CreationDate="2016-12-11T22:03:14.800" Score="1" Body="&lt;p&gt;Normally Ubuntu loads drivers for builtin cameras via its kernel on default&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check with 'lsmod' for the driver wich s loaded like for example &lt;code&gt;uvcvideo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unload it with &lt;code&gt;sudo rmmod uvcvideo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then plug the usb-cam in and see if it works and check for the driver again.&#xA;If you want to use your builtin camera again which uses &lt;code&gt;uvcvideo&lt;/code&gt; run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe uvcvideo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to config your laptop to just use the usb-webcam permamently then change your &lt;code&gt;etc/modules&lt;/code&gt; files to load the right driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some infos howto change Loadable Modules:&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/Loadable_Modules&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu - Loadable_Modules&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-11T22:03:14.800" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="9681" PostTypeId="1" AcceptedAnswerId="9689" CreationDate="2016-12-11T23:05:19.447" Score="1" ViewCount="1593" Body="&lt;p&gt;I'm not a linux expert. And I'm afraid to have problems about Wireless, wired or sound issue because of a system update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I wonder how to stop &lt;code&gt;AppCenter&lt;/code&gt; update notifications?&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2022-12-27T00:00:31.020" Title="How to stop AppCenter New Updates?" Tags="|updates|appcenter|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9682" PostTypeId="1" CreationDate="2016-12-11T23:47:23.857" Score="3" ViewCount="5338" Body="&lt;p&gt;I just upgraded from Freya to Loki and realised that it has touchscreen support! Which made me happy since it works perfectly. The only problem is that when I have to type something I have to use the physical keyboard. Is there any way to enable a screen keyboard that shows up when an input is required, just like Windows do?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-12-12T00:18:48.000" Title="Is there any way to enable a screen keyboard when input is required?" Tags="|release-loki|keyboard|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9683" PostTypeId="2" ParentId="9672" CreationDate="2016-12-12T00:05:07.497" Score="3" Body="&lt;p&gt;Loki has compatibility with touchscreen, at least in my case (Asus X550C).&#xA;Just like you, I have Windows 10 installed along with Elementary. When I was in Freya, touchscreen was not supported and didn't work properly, but recently since I upgraded to Loki it works like a charm, just like in Windows. So yes, install Loki and you will be able to use the computer as a tablet.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-12-12T00:05:07.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9684" PostTypeId="2" ParentId="9682" CreationDate="2016-12-12T00:18:48.000" Score="4" Body="&lt;p&gt;System Settings &gt; Universal Access &gt; Typing &gt; On-screen keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More advanced settings like hiding it when not in use and layout are available when you click on &quot;On-screen keyboard settings...&quot;&lt;/p&gt;&#xA;" OwnerUserId="7758" LastActivityDate="2016-12-12T00:18:48.000" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9685" PostTypeId="2" ParentId="9519" CreationDate="2016-12-12T01:57:30.200" Score="1" Body="&lt;p&gt;Yes, it is possible to install Elementary os Loki as long as the 2006 MacBook runs a 64bits Mac OS. For Example I installed it using a dvd myself. if you have a dvd that you or someone burnt Elementary os loki or a usb with Elementary os loki. &#xA;Put in the dvd/usb, turn off the macbook. Turn the macbook on, and hold the option key ... 'till you see a white screen. &#xA;Start elementary Deskyop without installing&#xA;and play with the OS before you decide to install &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary os is fun on Macbook.&lt;/p&gt;&#xA;" OwnerUserId="7633" LastActivityDate="2016-12-12T01:57:30.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9688" PostTypeId="1" CreationDate="2016-12-12T07:07:27.077" Score="3" ViewCount="68" Body="&lt;p&gt;How can I make Scratch stop asking to save before closing a file, while I make no changes? This happens when I did Preferences &gt; Behavior &gt; radio button off 'Save files when changed'.&#xA;Thank-you!&lt;/p&gt;&#xA;" OwnerUserId="7762" LastActivityDate="2017-02-17T14:01:20.250" Title="Make Scratch stop asking to save a file before closing a file" Tags="|code|" AnswerCount="2" CommentCount="0" ClosedDate="2019-04-19T21:42:25.977" ContentLicense="CC BY-SA 3.0" />
  <row Id="9689" PostTypeId="2" ParentId="9681" CreationDate="2016-12-12T07:42:18.807" Score="1" Body="&lt;p&gt;I've overcome this issue by adding a custom command to the startup: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings -&gt; Applications -&gt; Startup -&gt; 'plus sign' -&gt; &lt;code&gt;killall appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it lives still. I just put it to sleep (silence). With this way &lt;code&gt;AppCenter&lt;/code&gt; works only if I open it on Applications menu!&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="7495" LastEditDate="2016-12-29T04:03:08.993" LastActivityDate="2016-12-29T04:03:08.993" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9690" PostTypeId="1" AcceptedAnswerId="9697" CreationDate="2016-12-12T08:11:41.953" Score="2" ViewCount="1818" Body="&lt;p&gt;I have a Logitech C270 USB Webcam. When I open Snap the webcam works but it goes really slow (low fps). My webcam is capable of recording video at 1280x720 @ 30Fps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried with &lt;code&gt;cheese&lt;/code&gt; as well and I need to change the resolution to 800x600 or lower to get a decent fps. How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Loki stable.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2016-12-12T19:36:20.710" Title="Webcam extremely slow in Snap. How can I fix it?" Tags="|usb|webcam|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9691" PostTypeId="1" AcceptedAnswerId="9693" CreationDate="2016-12-12T14:17:50.107" Score="1" ViewCount="1057" Body="&lt;p&gt;I tried running &lt;code&gt;sudo nano /etc/fstab/&lt;/code&gt; but such a file did not exist. So &lt;code&gt;nano&lt;/code&gt; displays the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[ Error reading lock file /etc/.fstab.swp: Not enough data read ]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some other background info about my setup, I had a swap parition defined during the OS installation but due to space constaints on my main partition I deleted it, and consumed the space. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Afterwards I added a second drive to my system and I'm trying to use one of its partitions as the swap. This is possible with &lt;code&gt;GParted&lt;/code&gt; using the &lt;code&gt;swapon&lt;/code&gt; command but it needs to be done after every reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to permanently set the new partition as my swap? &lt;/p&gt;&#xA;" OwnerUserId="5520" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:44.630" LastActivityDate="2018-05-15T12:30:44.630" Title="How can I change the swap partition in Loki" Tags="|release-loki|swap|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9692" PostTypeId="2" ParentId="9691" CreationDate="2016-12-12T15:48:29.740" Score="4" Body="&lt;p&gt;You can check the UUID of your (new) swap space:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@host:~$ lsblk -f -o NAME,FSTYPE,UUID | grep swap&#xA;├─sda3 swap   ce70123c-6341-4802-9b96-29c39fb4110b&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should edit &lt;code&gt;sudo nano /etc/fstab&lt;/code&gt; (without the trailing slash) and add the line (make sure you use your UUID):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=ce70123c-6341-4802-9b96-29c39fb4110b none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-12T15:48:29.740" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9693" PostTypeId="2" ParentId="9691" CreationDate="2016-12-12T16:08:13.070" Score="1" Body="&lt;p&gt;As lemonslice said, you need to edit &lt;code&gt;/etc/fstab&lt;/code&gt; and not &lt;code&gt;/etc/fstab/&lt;/code&gt;.&#xA;You can use GParted to find your UUID (right click &gt; informations). &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Then just add a ligne to fstab like this &lt;code&gt;UUID=YOUR_UUID none            swap    sw              0       0&lt;/code&gt;. I made you a screenshot to show you my configuration : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/g70i5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g70i5.png&quot; alt=&quot;http://nsa38.casimages.com/img/2016/12/12/161212052324528993.png&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7285" LastEditorUserId="578" LastEditDate="2016-12-15T15:18:15.523" LastActivityDate="2016-12-15T15:18:15.523" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9695" PostTypeId="1" CreationDate="2016-12-12T18:08:20.827" Score="0" ViewCount="152" Body="&lt;p&gt;I'm running ElementaryOS Loki since yesterday and I'm very pleased so far, there is just one annoyance that I couldn't figure out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get a new session (as in: no programs open and a completely empty desktop) when my laptop turns on the lock screen or when I close my laptop (stanby)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few notes &amp;amp; specs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Ubuntu 16.04 (which I had before Loki) this didn't happen.&lt;/li&gt;&#xA;&lt;li&gt;There is no error shown, just an empty desktop when I enter my password again.&lt;/li&gt;&#xA;&lt;li&gt;I have the 64bit version and enabled home folder encryption.&lt;/li&gt;&#xA;&lt;li&gt;My laptop is the Transformer Book T300 CHI with all upgrades (8GB ram, 128GB SSD and 2560x1440 resolution, Intel Core M)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance, can post any info when needed! :)&lt;/p&gt;&#xA;" OwnerUserId="7767" LastActivityDate="2023-12-11T20:07:45.903" Title="New session when the lockscreen shows up (or when my laptop goes in standby)" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9696" PostTypeId="1" CreationDate="2016-12-12T18:10:52.447" Score="0" ViewCount="593" Body="&lt;p&gt;I am using elementary OS 0.4 Loki on my LENOVO ThinkPad Edge E125. Everything is fine except battery performance. The battery lasts hardly 1 hour what was previously almost 3 hours. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="7638" LastActivityDate="2016-12-13T17:15:52.617" Title="How to increase battery performance?" Tags="|release-loki|power|battery|thinkpad|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-19T01:57:55.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="9697" PostTypeId="2" ParentId="9690" CreationDate="2016-12-12T19:36:20.710" Score="1" Body="&lt;p&gt;Hi can you try to turn off the Automatic Light Correction the Logitech C270 uses.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theres a tool for configure such stuff out for Logtich cameras on Ubuntu its called &lt;strong&gt;guvcview&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it with &lt;code&gt;sudo apt-get install guvcview&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get into the control panel run&#xA;'guvcview -o'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There should be a point where you can turn out Automatic Light Correction.&#xA;Heres a thread about it &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361256/comments/10&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361256/comments/10&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-12T19:36:20.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9698" PostTypeId="1" CreationDate="2016-12-12T21:10:06.793" Score="2" ViewCount="25" Body="&lt;p&gt;elementary OS 0.4 Loki (64-bit) - in Calendar there is a summary of daily events at the right side of the screen. The summary is shifted one day back in time i.e. on Thursday it shows the events on Wednesday, on Friday the events of Thursday are shown etc. I can not trace a good reason for this.&lt;/p&gt;&#xA;" OwnerUserId="7756" LastActivityDate="2016-12-12T21:10:06.793" Title="Loki Calendar summary - shifted one day" Tags="|calendar|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-19T01:52:13.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="9699" PostTypeId="1" CreationDate="2016-12-12T21:57:09.817" Score="2" ViewCount="234" Body="&lt;p&gt;I'm using a fresh install of Loki 64bit on an Asus UX32VD. The battery always shows 0% and I get a &quot;find your charger now!&quot; message when I disconnect the laptop from the charger. WHen I click the battery icon, where it should indicate the time left, it keeps saying &quot;calculating&quot;.Strange thing is that I can go on working like this for some time. &#xA;So, I think the battery is somehow not completely recognized. Is that possible?&#xA;I also had this issue on previous elementary instals.&#xA; I have plucked out my charger from laptop it shutdown .&lt;/p&gt;&#xA;" OwnerUserId="7770" LastEditorUserId="-1" LastEditDate="2020-04-30T14:25:11.017" LastActivityDate="2020-04-30T14:25:11.017" Title="Battery always says 0%" Tags="|battery|" AnswerCount="0" CommentCount="1" ClosedDate="2019-04-16T06:26:56.193" ContentLicense="CC BY-SA 4.0" />
  <row Id="9702" PostTypeId="2" ParentId="9610" CreationDate="2016-12-13T14:41:13.973" Score="1" Body="&lt;p&gt;Just a suggestion, you can try to emulate a wheel with this script.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;xinput set-int-prop &quot;TOUCHPAD&quot; &quot;Evdev Wheel Emulation&quot; 8 1&#xA;xinput set-int-prop &quot;TOUCHPAD&quot; &quot;Evdev Wheel Emulation Button&quot; 8 3&#xA;xinput set-int-prop &quot;TOUCHPAD&quot; &quot;Evdev Wheel Emulation Timeout&quot; 16 200&#xA;xinput set-int-prop &quot;TOUCHPAD&quot; &quot;Evdev Wheel Emulation Axes&quot; 8 6 7 4 5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You must change &quot;TOUCHPAD&quot; with your own touchpad name, you can get it with &lt;code&gt;xinput -list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sources (french) : &lt;a href=&quot;https://doc.ubuntu-fr.org/touchpad#emuler_la_molette&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://doc.ubuntu-fr.org/touchpad#emuler_la_molette&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2016-12-13T14:41:13.973" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9703" PostTypeId="1" CreationDate="2016-12-13T14:56:33.203" Score="2" ViewCount="4220" Body="&lt;p&gt;I just learned of Elementary OS. I might like to try it.  Does Elementary OS work with HPLIP drivers for HP printers? If I use Elementary OS, I must have compatibility with my networked HP Officejet Pro 8500 All-in-one printer.&lt;/p&gt;&#xA;" OwnerUserId="7779" LastActivityDate="2016-12-23T11:13:58.847" Title="Does Elementary OS support HPLIP for HP printers?" Tags="|printer|hp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9704" PostTypeId="1" CreationDate="2016-12-13T15:11:43.080" Score="4" ViewCount="54" Body="&lt;p&gt;Re: your posting Switchboard &quot;use of URLs&quot; (link follows this comment)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am concerned that Switchboard's &quot;open/extendible&quot; approach could be or become Elementary's 'Achilles heal'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can the URL system mitigate the threat posed by malicious code injection / exploits?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These &quot;unchartered waters&quot; may represent a deal breaker for people &#xA;considering adopting or remaining with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, the Pantheon desktop interface is Elementary's killer feature.&#xA;Please don't kill it - for the sake of a &quot;nice to have&quot; feature.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wishing you and your team all the best for 2017&lt;/p&gt;&#xA;" OwnerUserId="7780" LastEditorUserId="45" LastEditDate="2016-12-13T20:10:55.247" LastActivityDate="2016-12-13T22:31:57.767" Title="Will the Preferences URL Specification pose a security threat?" Tags="|security|switchboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9705" PostTypeId="2" ParentId="9703" CreationDate="2016-12-13T15:52:10.520" Score="3" Body="&lt;p&gt;You can install the package &lt;code&gt;hplip&lt;/code&gt; via the command line in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt install hplip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-13T15:52:10.520" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9706" PostTypeId="1" CreationDate="2016-12-13T16:09:33.037" Score="0" ViewCount="249" Body="&lt;p&gt;I had to reset the PRAM on my MB Pro the other day. I had elementary OS installed, and it would automatically boot to it (still hadn't figure out how to get the GRUB screen up). I would have to hold down the option key to get the choice to boot El Capitan.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, after the reset it automatically boots into OS X. I thought i had erased elementary OS but when I attached the USB stick in order to reinstall it, it noted that elementary OS was already on the machine. I didn't install and took a look at GPARTED, and sure enough there it was, with the swap file and everything. In OS Disk Utility it showed the mac partition and the other partition for elementary OS, but was called 'unidentified.' &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So to my mind there has to be a way to be able to boot into elementary OS, but I don't know how to do this. Can someone help me out here? If you need more info let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what I can tell you so far after some replies:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just turned on the mac after inserting the usb stick with elementary OS on it (i think its an iso file). When I hold down the option key I get either the mac partition or the usb stick (which is called EFI boot). I choose that one, and now I'm looking at the GNU Grub screen, with the the choices to &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Try elementary OS without installing&lt;/li&gt;&#xA;&lt;li&gt;Install elementary OS&lt;/li&gt;&#xA;&lt;li&gt;OEM install (for manufacturers)&lt;/li&gt;&#xA;&lt;li&gt;Check disc for errors&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There's no rescue here (which i've been advised to try) obviously. So if I choose install, which I think is what you mean, then I get the welcome screen with a language choice&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then when I click continue I get the preparing to install elementary OS; i click continue with a choice to download updates while installing and one to download third party software for graphics and wi-fi hardware, etc. I don't choose either and just click continue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I get the installation type window. at the the top oft he window there is a message saying that elementary OS is already install the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I choose the &quot;something else&quot; option, rather than erased the disk, or encrypt the new elementary installation for security, or the use the LVM with the new elementary OS installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I get the installation type with all the the partitions on the SSD:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;/dev/sda1 efi&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda2 hfs+ (the mac partition]&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda3 hfs+ (mac recovery partition or disk)&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda4 hfs+ (another mac recovery disk)&lt;/li&gt;&#xA;&lt;li&gt;/dev/sda5 ext4 (the elementary OS partition)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There is also the linx swap file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also &quot;device for boot loader installation&quot; with the name of the SSD in the mac&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are no mount points for any of these partitions, if that makes any difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If a cancel the install I get the desktop, and when I open gparted it shows all the partitions, but the only one that has a flag is the EFI System Partition. none of the other partitions have any flags, and I'm not sure of that means anything.&lt;/p&gt;&#xA;" OwnerUserId="6129" LastEditorUserId="308" LastEditDate="2018-08-07T16:51:26.813" LastActivityDate="2021-01-25T00:02:45.257" Title="Can't reboot into elementary OS after MBpro PRAM reset" Tags="|boot|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9707" PostTypeId="1" CreationDate="2016-12-13T16:29:37.013" Score="0" ViewCount="101" Body="&lt;p&gt;I'll been using Elementary on regular basis for a couple of years now and I really like it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But - when I open a map (folder) with Files the files are sorted fine - by maps and then filename, but when I open a map within Evolution and some other programs (gedit) files are sorted only by name (first a map beginning with A and then a file beginning with A) - that's bad. I just want the maps be sorted by type and name even form the program I use. Is it possible to make adjustment to achieve that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards&#xA;Bengt G Jacobsson&#xA;Uppsala, Sweden&lt;/p&gt;&#xA;" OwnerUserId="5030" LastEditorUserId="578" LastEditDate="2016-12-14T07:45:05.883" LastActivityDate="2016-12-14T10:45:28.383" Title="Sorting files in different maps (folders)" Tags="|pantheon-files|libreoffice|file-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9708" PostTypeId="2" ParentId="9696" CreationDate="2016-12-13T17:15:52.617" Score="0" Body="&lt;p&gt;elementaryOS needs far more battery power then some other distros. You pay the price for the shiny appearance. In my experience Peppermint or lubuntu last about double the time than elementaryOS does on the same machine. Switching off discrete video card and using integrated video, however, will improve battery performance radically on some machines which have double video option feature. All the rest wizardry (with powertop etc) did not seriously improve battery performance on my ThinkPad.&lt;/p&gt;&#xA;" OwnerUserId="7756" LastActivityDate="2016-12-13T17:15:52.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9709" PostTypeId="1" AcceptedAnswerId="9739" CreationDate="2016-12-13T19:55:19.750" Score="1" ViewCount="1553" Body="&lt;p&gt;I've encountered a couple of problems whilst trying to install Elementary OS alongside my existing Windows 8.1 installation. I've resolved one but hit a wall with the other. I really appreciate any help, I really want to use this OS.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Main Problem&lt;/h1&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Installer crashed&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After choosing the installation type (Install elementary alongside Windows Boot Manager), a dialog appears that says &quot;Copying files...&quot;. After some time this changes to &quot;Installing system&quot;. A couple of moments later I receive the error message above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I took a bunch of photos of the screen throughout the process that you can view &lt;a href=&quot;https://drive.google.com/drive/folders/0B8nySlDXyPwqLXVtZkMwNU1TTFE?usp=sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can expand the &quot;Installing system&quot; dialog to see extra detail, and the last message displayed before / as the error occurs is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.install_misc.InstallStepError: Plugin language failed with code 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;Other Problems&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Error immediately at beginning of installation.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sorry, elementary 0.4 has experienced an internal error.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Resolved this by running opening a terminal and running &lt;code&gt;sudo apt-get remove ubiquity-slideshow-elementary&lt;/code&gt;, then restarting the installation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Left click on touchpad only works on some things. For example it works on icons on the dock, but not on the icons in the top right.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h1&gt;Other Details&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Created bootable USB with Rufus.&lt;/li&gt;&#xA;&lt;li&gt;Disabled secure boot.&lt;/li&gt;&#xA;&lt;li&gt;Disabled fast startup.&lt;/li&gt;&#xA;&lt;li&gt;Disabled fast boot.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="7783" LastEditorUserId="7783" LastEditDate="2016-12-16T08:10:17.137" LastActivityDate="2016-12-16T08:10:17.137" Title="&quot;Installer crashed&quot; during install process on a dual boot UEFI Windows 8.1 64-bit laptop" Tags="|dual-boot|usb-drive|uefi|laptop|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9710" PostTypeId="2" ParentId="9704" CreationDate="2016-12-13T20:08:27.663" Score="4" Body="&lt;p&gt;I have a strong feeling that this question comes from confusion about what the URL scheme is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Preferences URL specification is only a way to open settings applications to the correct location. &lt;strong&gt;It is not a way to transmit any kind of data&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Settings URLs look like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;✔️ &lt;code&gt;settings://applications/startup&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;This URL will only open the settings application&lt;/strong&gt; to the correct location for the user to take further action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Never like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;❌ &lt;code&gt;settings://applications/startup?add-app=malicious%20app%20name&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The spec does not intend to describe a way to handle data and you're right that doing so would probably not be a good idea.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR Settings URLs only open the settings app. They do not transmit data. They cannot change settings. They do not interact with any settings backends like gsettings or keyfiles.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2016-12-13T22:31:57.767" LastActivityDate="2016-12-13T22:31:57.767" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9711" PostTypeId="2" ParentId="9565" CreationDate="2016-12-13T20:42:35.903" Score="1" Body="&lt;p&gt;I solved my problem by updating the kernel to the latest version (4.6.5) following these instructions:  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;To Install and upgrade Linux Kernel 4.6.5 (Stable) on Ubuntu 16.04&#xA;  Xenial Xerus, Ubuntu 15.10 wily werewolf, Ubuntu 15.04 vivid Vervet,&#xA;  ubuntu 14.10 Utopic Unicorn, Ubuntu 14.04 Trusty Tahr (LTS), Linux&#xA;  Mint 17.1, Linux Mint 17.2, Linux Mint 17.3 and other Ubuntu&#xA;  derivative systems, open a new Terminal window and bash (get it?) in&#xA;  the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://in4serv.com.br/backup/kernel-4.6.5&#xA;&#xA;sudo chmod +x kernel-4.6.5&#xA;&#xA;./kernel-4.6.5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;After Download and installation kernel 4.6.5 is finished, you must&#xA;  reboot your ubuntu system to change boot latest kernel :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Booting, and check your ubuntu kernel version&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://www.theubuntumaniac.com/2016/07/update-to-linux-kernel-465-stable-on.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Update to Linux Kernel 4.6.5 (stable) on Linux Mint / Elementary OS / Ubuntu Derivatives&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7685" LastEditorUserId="16827" LastEditDate="2019-05-05T05:29:48.367" LastActivityDate="2019-05-05T05:29:48.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9713" PostTypeId="2" ParentId="9706" CreationDate="2016-12-14T10:33:24.133" Score="1" Body="&lt;p&gt;Hi I use the rEFInd bootloader on my Mac to boot Linux and OSX&#xA;&lt;a href=&quot;https://sourceforge.net/projects/refind/&quot; rel=&quot;nofollow noreferrer&quot;&gt;rEFInd&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply download on OSX unpack the Zip file the open the Terminal cd into the refind-bin folder and run:&#xA;&lt;code&gt;sudo ./refind-install&lt;/code&gt;&#xA;This will install the bootloader then reboot the Mac and from the menu choose elemantary OS.&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-14T10:33:24.133" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9714" PostTypeId="2" ParentId="9707" CreationDate="2016-12-14T10:45:28.383" Score="1" Body="&lt;p&gt;You can change the behaviour of program such as gedit that use the Gtk+3 filechooser by changing the dconf setting org.gtk.Settings.FileChooser.sort-directories-first  using dconf-editor or from the commandline. (gsettings set org.gtk.Settings.FileChooser sort-directories-first true).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-12-14T10:45:28.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9717" PostTypeId="1" AcceptedAnswerId="9723" CreationDate="2016-12-14T22:27:46.383" Score="2" ViewCount="195" Body="&lt;p&gt;Is there any way to set a keyboard shortcut to toggle do not disturb mode on/off?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="160" LastEditDate="2016-12-15T00:18:02.773" LastActivityDate="2022-03-14T05:21:47.237" Title="Toogle do not disturb mode with keyboard shortcut?" Tags="|release-loki|keyboard-shortcuts|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9718" PostTypeId="1" CreationDate="2016-12-14T22:45:07.273" Score="0" ViewCount="281" Body="&lt;p&gt;I'm a beginner linux user and as my first linux os I chose elementary and I think its great. But everyday since I installed it(couple of days ago) I get an update for 'Operating System Updates'. Even though it is good to see the distro getting better and better, I can't find a way to see the change log. Is there any way to see it or its not implemented yet?&lt;/p&gt;&#xA;" OwnerUserId="7794" LastActivityDate="2016-12-15T18:29:01.543" Title="How to view the change log?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-15T19:15:34.020" ContentLicense="CC BY-SA 3.0" />
  <row Id="9720" PostTypeId="1" AcceptedAnswerId="9724" CreationDate="2016-12-15T06:51:46.437" Score="0" ViewCount="356" Body="&lt;p&gt;When I plug in a USB stick or an external hard drive the system does absolutely nothing to notify me that this happened. The external device works perfectly fine, it's just that I don't get the classic little sound or pop-up telling me that it was connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was wondering, is there a way to modify this behavior and make it so that the system allows me to chose something like &quot;open in folder&quot; ??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="7796" LastActivityDate="2016-12-15T15:16:23.123" Title="Behavior when plugging USB" Tags="|notifications|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9721" PostTypeId="1" CreationDate="2016-12-15T08:45:14.647" Score="1" ViewCount="206" Body="&lt;p&gt;I need to edit some code regarding changing desktop wallpaper. Unfortunately I don't know Vala, but I found this piece of code in &lt;em&gt;Wallpaper.vala&lt;/em&gt; file of the &lt;em&gt;switchboard-plug-pantheon-shell&lt;/em&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[DBus (name = &quot;org.freedesktop.Accounts.User&quot;)]&#xA;interface AccountsServiceUser : Object {&#xA;    public abstract void set_background_file (string filename) throws IOError;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It looks to me like a definition of some &quot;extern&quot; function for further calls. Am I right? Where can I find the body of this function?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7725" LastActivityDate="2016-12-15T16:34:29.083" Title="How does using extern functions work?" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9723" PostTypeId="2" ParentId="9717" CreationDate="2016-12-15T09:46:15.670" Score="4" Body="&lt;p&gt;Yes, you can. Disturb mode can be set via the dconf boolean value &lt;code&gt;org.pantheon.desktop.gala.notifications.do-not-disturb&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can toggle it with a script like this (saved as &lt;code&gt;~/bin/toggle_do-not-disturb&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;KEY='/org/pantheon/desktop/gala/notifications/do-not-disturb'&#xA;dconf write $KEY $(if [ $(dconf read $KEY) = 'true' ]; then echo false; else echo true; fi)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can assign this script to a custom hot key in &lt;em&gt;Settings/Keyboard&lt;/em&gt; &lt;em&gt;Layout&lt;/em&gt; tab:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OLwD4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OLwD4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-15T09:46:15.670" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9724" PostTypeId="2" ParentId="9720" CreationDate="2016-12-15T15:16:23.123" Score="1" Body="&lt;p&gt;You could install a file manager that offers this feature, such as Nautilus. There is a &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1094669&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug report&lt;/a&gt; for adding this feature to Pantheon-Files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9438/will-the-developers-add-the-option-to-automount-external-media-devices/9463&quot;&gt;Will the developers add the option to automount external media &amp;amp; devices?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-15T15:16:23.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9725" PostTypeId="1" CreationDate="2016-12-15T15:21:31.153" Score="1" ViewCount="66" Body="&lt;p&gt;I am having a problem with shutting down the computer. I have looked in the settings, and nothing will give me the same options to mimic what apple would make your computer do after you closed it. I want my computer, once closed, to not keep the screen on and such inside the computer. I want it to turn off everything and power down, without me having to restart the computer the next time I do something. This would be extremely helpful to me because my computer doesn't last long without a plug on Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="7734" LastActivityDate="2017-01-29T06:26:43.673" Title="How to get my computer to turn off when the lid is closed" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9726" PostTypeId="1" CreationDate="2016-12-15T15:24:57.917" Score="0" ViewCount="1586" Body="&lt;p&gt;Well my problem is that, lately it happens a lot.  When i turn on, nothing appears(wingpanel,dock) but only my wallpaper.  It's tiring to restart all the time the pc, and sometimes it doesn't even load on second or even third restart.&#xA;I tried once to re install pantheon via terminal (alt f2) but still happens&#xA;Any solutions?&lt;/p&gt;&#xA;" OwnerUserId="4413" LastActivityDate="2017-05-24T13:04:51.517" Title="Pantheon doesn't load" Tags="|wingpanel|plank|pantheon|" AnswerCount="2" CommentCount="2" ClosedDate="2018-03-11T02:00:13.007" ContentLicense="CC BY-SA 3.0" />
  <row Id="9727" PostTypeId="1" CreationDate="2016-12-15T15:45:46.897" Score="2" ViewCount="308" Body="&lt;p&gt;I tried installing elementaryOS onto a flash drive on my Razer Blade Stealth with the unetbootin program.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to get into the installation process although the screen was flashing on and off a lot. What I mean by this is that, the installation process was working (i.e. asking about keyboard layout, timezone, etc) but the screen was randomly going black in very fast flashes unless I moved the mouse cursor in which case it would look normal and not flash.&#xA;I figured this was just a glitch with the installer and continued with the installation.&#xA;I formatted the flash drive that I wanted to install the OS on with the Ext2 filesystem (was that a good choice?) and I decided not to partition a swap space because the flash drive is only 16GB and my computer has a decent amount of RAM.&#xA;The installation finished successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I restarted, got into the bootloader, booted elementaryOS, the elementaryOS logo splash screen displayed. Then, a loud static noise came from my speaker and the screen became a mess of multicolored pixelated rectangles and glitchy-ness.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I restarted and use the bootloader to boot into elementaryOS recovery mode where I received an error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can see the error message &lt;a href=&quot;https://goo.gl/photos/u6yDfMn93uNHfgX68&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Sorry for the crap quality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice is much appreciated. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7799" LastActivityDate="2024-02-05T06:01:40.177" Title="Installation on flash drive produces errors. Did I install correctly?" Tags="|system-installation|boot|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9728" PostTypeId="2" ParentId="9721" CreationDate="2016-12-15T16:34:29.083" Score="2" Body="&lt;p&gt;What you're looking at here is an interface with an abstract method.  Virtually all OOP languages have a similar concept to interfaces, but since you didn't specify which language(s) you do know I can't really draw a parallel to something you're already familiar with.  Explaining the concept from scratch is really beyond the scope of a SO answer; you might want to take a look at &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/Tutorial#Interfaces-1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Projects/Vala/Tutorial#Interfaces-1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;abstract&lt;/code&gt; keyword is a bit more interesting; Vala interfaces can be used as mixins.  Methods can be implemented either in the interface (in which case they are non-abstract) or left for classes which actually implement that interface to implement (in which case they are abstract).  This allows you to share more code than purely abstract interfaces would.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, you can find the implementations of that method in every non-abstract class which implements that interface.&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2016-12-15T16:34:29.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9729" PostTypeId="2" ParentId="9718" CreationDate="2016-12-15T18:29:01.543" Score="0" Body="&lt;p&gt;There isn't a changelog to view really. Elementary has been posting frequent Development Updates on their blogs detailing the more major recent changes. You can find those at &lt;a href=&quot;http://blog.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.elementary.io&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3879" LastActivityDate="2016-12-15T18:29:01.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9730" PostTypeId="1" AcceptedAnswerId="9734" CreationDate="2016-12-15T18:42:11.033" Score="2" ViewCount="597" Body="&lt;p&gt;The title explains it all how does one set up &lt;code&gt;pantheon-mail&lt;/code&gt; to send emails signed with &lt;code&gt;gpg&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible through the UI or not?&lt;/p&gt;&#xA;" OwnerUserId="7802" LastEditorUserId="7802" LastEditDate="2016-12-15T18:59:01.987" LastActivityDate="2016-12-15T20:32:56.187" Title="How to send emails with GPG signing through Pantheon-mail" Tags="|pantheon-mail|gpg|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9731" PostTypeId="1" CreationDate="2016-12-15T18:43:34.787" Score="0" ViewCount="322" Body="&lt;p&gt;When Private Internet Access is running on Elementary OS, it launches and goes in the background. You cannot access it in the notifications pane. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you go and try to run it again, it will never show the settings. So, if you connected to one VPN on setup, you can no longer set up another VPN server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any fix for this?&lt;/p&gt;&#xA;" OwnerUserId="7803" LastActivityDate="2017-03-21T13:20:55.013" Title="When PIA is running, you can no longer access the application to connect to a different VPN. It's no longer in the notifications panel" Tags="|internet|vpn|openvpn|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9733" PostTypeId="1" CreationDate="2016-12-15T19:44:22.917" Score="1" ViewCount="212" Body="&lt;p&gt;I am considering to deploy ElementaryOS as lightweight terminals in an Active Directory environment. I have LDAP configured on ElementaryOS and, as long as the user account exists locally, the user can log on just fine. The homedir is created and GUI is set up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Creating the user as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;useradd MyUser&#xA;usermod -aD MyUser adm cdrom dip plugdev lpadmin sambashare&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With the exception of sudo, these are all of the groups that the default user has as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to log out, reboot or shut down the machine, none work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Behavior:&#xA;- Log Out: The logout menu shows, the red button can be pressed, but nothing happens. The menu remains open until cancel is pressed.&#xA;- Restart: The shutdown menu appears, pressing the restart button closes the menu without doing anything.&#xA;- Shutdown: The shutdown menu appears, pressing the shutdown button does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is happening on multiple different physical machine models, as well as on Virtualbox VM's.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what could be causing this?&lt;/p&gt;&#xA;" OwnerUserId="7805" LastActivityDate="2016-12-15T19:44:22.917" Title="LDAP User cannot logout, reboot or shutdown" Tags="|shutdown|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9734" PostTypeId="2" ParentId="9730" CreationDate="2016-12-15T20:32:56.187" Score="2" Body="&lt;p&gt;There is no PGP/GPG support for now, but a feature request already has been filed, you can mark that it affects you as well: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1517988&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-mail/+bug/1517988&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to post a bounty as well:  &lt;a href=&quot;https://www.bountysource.com/issues/1353854-transparent-encryption-and-signing-with-gpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bountysource.com/issues/1353854-transparent-encryption-and-signing-with-gpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-15T20:32:56.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9735" PostTypeId="1" CreationDate="2016-12-15T22:16:07.477" Score="11" ViewCount="1999" Body="&lt;p&gt;I recently bought aa Razer Blade Stealth laptop which I'm having issues with Elementary Loki on. This laptop uses the 7th gen Intel Kaby Lake chipset with an HD 620 graphics chip and a HIDPI touchscreen (12.5&quot; 2560x1440 QHD).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can boot to the installer without issue and proceed through the install (even the touchscreen works!). Once installed It boots to the login screen (lightdm) and I can move my mouse, type password etc without problem, but as soon as I login the machine crashes with a garbled screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While at the login screen I can alt-F1 to another console and login there without issue. while there I've checked a bunch of logs but they all end abruptly, I'm guess it crashes before it has a chance to log anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;explicitly setting an xorg.conf with tweaks from the Arch wiki (&lt;a href=&quot;https://wiki.archlinux.org/index.php/razer#Graphics_Drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/razer#Graphics_Drivers&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Upgrading the kernel to 4.8 (as I heard it has many Kaby Lake fixes in it)&lt;/li&gt;&#xA;&lt;li&gt;Stopping lightdm and running startx from a console&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Every time a crash as soon as the desktop starts to load.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed Xubuntu 16.04 (as I had the ISO handy) and that works without issue - I can load the desktop fine (though the HIDPI support is a bit poor). From there I added two elementary repos, ppa:elementary-os/stable and ppa:elementary-os/os-patches and using apt installed elementary-theme elementary-icon-theme elementary-default-settings elementary-desktop (as per this post - &lt;a href=&quot;https://askubuntu.com/questions/766673/pantheon-on-ubuntu-16-04&quot;&gt;https://askubuntu.com/questions/766673/pantheon-on-ubuntu-16-04&lt;/a&gt;) but it still crashes as soon as I try and log in to Pantheon (XFCE still works fine).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm out of ideas - are there any commands I can pass to the kernel at boot, some sort of safe mode, or debugging? It's strange that lightdm works fine, XFCE works fine, but pantheon crashes hard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for the essay - was trying to get as much info in as possible!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;Andrew&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Added the fact it is a HIDPI display&lt;/p&gt;&#xA;" OwnerUserId="7722" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2018-12-20T22:03:00.610" Title="Elementary crashing on desktop login" Tags="|desktop|crash|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="9736" PostTypeId="2" ParentId="9727" CreationDate="2016-12-15T23:05:41.007" Score="0" Body="&lt;p&gt;I have the Razer Blade Stealth too and have the same issue with the garbled screen and crashing - &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9735/elementary-crashing-on-desktop-login&quot;&gt;Elementary crashing on desktop login&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case I've installed it to the internal SSD so it isn't due to you using a flash drive as I have the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason you're having to run fsck is the filesystem was marked dirty due to the crash - if you use a journaled FS (like ext3/4) you probably won't get that error as it will repair itself from the journal after a crash. This won't fix the crashing though!&lt;/p&gt;&#xA;" OwnerUserId="7722" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2016-12-15T23:05:41.007" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9737" PostTypeId="2" ParentId="6870" CreationDate="2016-12-16T06:54:35.093" Score="0" Body="&lt;p&gt;There are disk read errors (&lt;code&gt;Dev sdb: unable to read RDB block 0&lt;/code&gt;). You might want to try another USB port and verify that your disk can be read on another machine / another card reader.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-16T06:54:35.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9738" PostTypeId="2" ParentId="4113" CreationDate="2016-12-16T06:59:51.513" Score="1" Body="&lt;p&gt;You want to run a script that does not need user interaction so there is absolutely no problem that it does not ask for the root password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually the file &lt;code&gt;/etc/rc.local&lt;/code&gt; is run with root user privileges, so it should work (without asking a password). However, the preferred method to mount filesystems automatically is to append them into the file &lt;code&gt;/etc/fstab&lt;/code&gt;. There should be a line like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//xxx.xxx.xxx.xxx/networkshare /mnt/local cifs user=user,password=pass,uid=xxx,gid=xxx 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-16T06:59:51.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9739" PostTypeId="2" ParentId="9709" CreationDate="2016-12-16T08:02:57.563" Score="1" Body="&lt;p&gt;Fixed it. I found &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1579454&quot; rel=&quot;nofollow noreferrer&quot;&gt;a bug reported on launchpad that described my problem&lt;/a&gt;, it is apparently due to the installer (ubiquity) trying to open a file that it needs super user permissions for. The work around is to run the installer under &lt;code&gt;sudo&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do this I selected &quot;Try elementary without installing&quot;. Once booted there is a shortcut with the title &quot;Install Elementary OS&quot;, I decided to just modify this shortcut by opening a terminal (&lt;code&gt;command + T&lt;/code&gt;) and issuing the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/applications&#xA;nano ubiquity.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now scroll down and add 'sudo' to the beginning of the execution property.&#xA;Save the file. Click it (you may have to look in the application launcher to find it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively you may be able to just open a terminal and execute &lt;code&gt;sudo ubiquity&lt;/code&gt;, but I've not tested this.&lt;/p&gt;&#xA;" OwnerUserId="7783" LastActivityDate="2016-12-16T08:02:57.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9740" PostTypeId="1" CreationDate="2016-12-16T12:26:56.940" Score="2" ViewCount="702" Body="&lt;p&gt;I have been using ElementaryOS Loki for the last few days using my Monitor connected via HDMI for audio. However today when watching a youtube video, I paused it and resumed it and there was no sound.&#xA;Since then even after numerous restarts I cant get sound, even if i plug in some headphones.&#xA;I have tried Pulse Audio which does show sound attempting to play, but can't seem to find the right audio device to play it.&#xA;Typed aplay -l which does show HDMI as device 3&#xA;Have also tried killing the audio, as well as reinstalling pulse but cant get it to work.     &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: When using the default sound controllers HDMI is no longer showing despite using the monitor.&lt;br&gt;&#xA;Edit 2: Managed to get HDMI to show in the output list however it cant play sound still. Headphones do play sound when I change The config in pulse to &quot;Analog Stereo Duplex&quot; but there is some static when no music is playing.&lt;br&gt;&#xA;Edit 3: Got rid of the static by disabling loopback in aslamixer&lt;/p&gt;&#xA;" OwnerUserId="7811" LastEditorUserId="16827" LastEditDate="2019-04-16T06:33:34.003" LastActivityDate="2019-04-16T06:33:34.003" Title="No sound from external monitor HDMI" Tags="|audio|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="9741" PostTypeId="1" CreationDate="2016-12-16T13:46:45.570" Score="4" ViewCount="477" Body="&lt;p&gt;Since yesterday the App Center won't work properly anymore.&lt;/p&gt;&#xA;&lt;p&gt;Doesn't show installed programms anymore:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3eZpX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3eZpX.jpg&quot; alt=&quot;Doesn't show installed programms anymore&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Won't download nor install new ones:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nSTM5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nSTM5.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Already tried:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;sudo apt purge appcenter&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install appcenter&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo reboot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;nothing worked... any ideas?&lt;/p&gt;&#xA;" OwnerUserId="7813" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-12-31T23:01:35.283" Title="App Center won't show installed programms // won't install new ones" Tags="|release-loki|appcenter|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9742" PostTypeId="1" CreationDate="2016-12-16T13:46:49.297" Score="0" ViewCount="1173" Body="&lt;p&gt;I was using windows 10, then I installed Linux Elementary OS. During the installation, I deleted my windows. Now my elementary is working fine, just I want to install windows back cause I have work with Microsoft Office and I don't want to remove elementary.&lt;/p&gt;&#xA;" OwnerDisplayName="user7814" LastActivityDate="2017-01-17T02:05:58.300" Title="How to make disk Partition?" Tags="|microsoft-windows|disk-management|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9744" PostTypeId="2" ParentId="9742" CreationDate="2016-12-16T18:37:55.090" Score="0" Body="&lt;p&gt;You can use &lt;strong&gt;gparted&lt;/strong&gt; software for your reasons, especially from live usb.&#xA;Also, &lt;strong&gt;libreoffice&lt;/strong&gt; is full functionality and good alternative for microsoft office. For example in our company (one of the biggests banks of the country) we all using libreoffice and really happy with it.&#xA;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="7816" LastActivityDate="2016-12-16T18:37:55.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9745" PostTypeId="1" CreationDate="2016-12-16T23:43:06.937" Score="2" ViewCount="607" Body="&lt;p&gt;I have a 3-monitor setup using 2 external monitors in addition to the primary display on my monitor. I have the external monitors side by side, with the primary laptop display centered below them. When I try to make anything full-screen in the external monitors they appear to only expand to the top left or right corner of the primary display instead of spanning the entire screen. Below is a screenshot with my current setup, as well as a &quot;fullscreen&quot; Opera window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EBr9T.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EBr9T.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7818" LastActivityDate="2018-11-18T19:08:41.373" Title="Cannot make windows fullscreen in Loki with multiple monitors" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9748" PostTypeId="1" AcceptedAnswerId="9750" CreationDate="2016-12-17T13:12:41.110" Score="2" ViewCount="838" Body="&lt;p&gt;When I was installing an update my computer crashed and shut down. Now, whenever i try to update anything or download an app via the appcenter it asks for permission and then says &quot;Waiting for package manager lock&quot; for a few seconds before automatically canceling the download/update. How do I fix this?&lt;/p&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-12-17T13:32:18.733" Title="Can't update OS anymore" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9749" PostTypeId="2" ParentId="9741" CreationDate="2016-12-17T13:17:29.283" Score="0" Body="&lt;p&gt;Hi could you try to run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;sudo dpkg --configure -a &#xA;sudo apt update&lt;/pre&gt;&lt;/p&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then start AppCenter again.&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2016-12-17T13:17:29.283" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9750" PostTypeId="2" ParentId="9748" CreationDate="2016-12-17T13:32:18.733" Score="1" Body="&lt;p&gt;I fixed it already. Just had to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user7151" LastActivityDate="2016-12-17T13:32:18.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9751" PostTypeId="2" ParentId="8676" CreationDate="2016-12-17T13:57:01.577" Score="3" Body="&lt;p&gt;Open your terminal and try to run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;sudo apt update&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user7713" LastEditorUserId="-1" LastEditDate="2021-12-12T09:12:31.243" LastActivityDate="2021-12-12T09:12:31.243" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9753" PostTypeId="1" CreationDate="2016-12-17T14:38:12.173" Score="2" ViewCount="202" Body="&lt;p&gt;Is it possible to set a video background in pantheon-greeter?&lt;/p&gt;&#xA;" OwnerUserId="6627" LastEditorUserId="160" LastEditDate="2016-12-17T17:32:35.270" LastActivityDate="2016-12-28T18:25:46.520" Title="How to set video in background of lock screen?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9754" PostTypeId="1" CreationDate="2016-12-17T14:40:20.273" Score="1" ViewCount="79" Body="&lt;p&gt;I've installed Back in time and configured it, however it isn't work. &lt;code&gt;backintime/&amp;lt;username&amp;gt;/&lt;/code&gt; directory was created but it is empty. How to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Config:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome.last_path=&amp;lt;folder&amp;gt;&#xA;gnome.main_window.height=528&#xA;gnome.main_window.hpaned1=200&#xA;gnome.main_window.hpaned2=200&#xA;gnome.main_window.width=786&#xA;gnome.main_window.x=183&#xA;gnome.main_window.y=363&#xA;gnome.show_hidden_files=false&#xA;profile1.snapshots.automatic_backup_anacron_period=1&#xA;profile1.snapshots.automatic_backup_day=1&#xA;profile1.snapshots.automatic_backup_mode=30&#xA;profile1.snapshots.automatic_backup_time=2100&#xA;profile1.snapshots.automatic_backup_weekday=1&#xA;profile1.snapshots.backup_on_restore.enabled=true&#xA;profile1.snapshots.bwlimit.enabled=false&#xA;profile1.snapshots.bwlimit.value=3000&#xA;profile1.snapshots.check_for_changes=true&#xA;profile1.snapshots.continue_on_errors=true&#xA;profile1.snapshots.copy_links=false&#xA;profile1.snapshots.copy_unsafe_links=false&#xA;profile1.snapshots.cron.ionice=true&#xA;profile1.snapshots.cron.nice=true&#xA;profile1.snapshots.custom_backup_time=8,12,18,23&#xA;profile1.snapshots.dont_remove_named_snapshots=true&#xA;profile1.snapshots.exclude.1.value=.gvfs&#xA;profile1.snapshots.exclude.10.value=/proc/*&#xA;profile1.snapshots.exclude.11.value=/sys/*&#xA;profile1.snapshots.exclude.12.value=/dev/*&#xA;profile1.snapshots.exclude.13.value=/run/*&#xA;profile1.snapshots.exclude.2.value=.cache*&#xA;profile1.snapshots.exclude.3.value=[Cc]ache*&#xA;profile1.snapshots.exclude.4.value=.thumbnails*&#xA;profile1.snapshots.exclude.5.value=[Tt]rash*&#xA;profile1.snapshots.exclude.6.value=*.backup*&#xA;profile1.snapshots.exclude.7.value=*~&#xA;profile1.snapshots.exclude.8.value=.dropbox*&#xA;profile1.snapshots.exclude.size=13&#xA;profile1.snapshots.full_rsync=false&#xA;profile1.snapshots.include.1.type=0&#xA;profile1.snapshots.include.1.value=/&amp;lt;folder1&amp;gt;&#xA;profile1.snapshots.include.2.type=0&#xA;profile1.snapshots.include.2.value=/&amp;lt;folder2&amp;gt;&#xA;profile1.snapshots.include.size=2&#xA;profile1.snapshots.local.password.save=false&#xA;profile1.snapshots.local.password.use_cache=false&#xA;profile1.snapshots.local_encfs.path=&amp;lt;backup folder&amp;gt;&#xA;profile1.snapshots.log_level=3&#xA;profile1.snapshots.min_free_inodes.enabled=true&#xA;profile1.snapshots.min_free_inodes.value=2&#xA;profile1.snapshots.min_free_space.enabled=true&#xA;profile1.snapshots.min_free_space.unit=20&#xA;profile1.snapshots.min_free_space.value=100&#xA;profile1.snapshots.mode=local&#xA;profile1.snapshots.no_on_battery=false&#xA;profile1.snapshots.notify.enabled=true&#xA;profile1.snapshots.path=&amp;lt;backup folder&amp;gt;&#xA;profile1.snapshots.path.auto=true&#xA;profile1.snapshots.path.host=evzen-System-Product-Name&#xA;profile1.snapshots.path.profile=1&#xA;profile1.snapshots.path.user=evzen&#xA;profile1.snapshots.preserve_acl=false&#xA;profile1.snapshots.preserve_xattr=false&#xA;profile1.snapshots.remove_old_snapshots.enabled=true&#xA;profile1.snapshots.remove_old_snapshots.unit=80&#xA;profile1.snapshots.remove_old_snapshots.value=3&#xA;profile1.snapshots.smart_remove=true&#xA;profile1.snapshots.smart_remove.keep_all=2&#xA;profile1.snapshots.smart_remove.keep_one_per_day=7&#xA;profile1.snapshots.smart_remove.keep_one_per_month=24&#xA;profile1.snapshots.smart_remove.keep_one_per_week=4&#xA;profile1.snapshots.ssh.cipher=default&#xA;profile1.snapshots.ssh.host=&#xA;profile1.snapshots.ssh.ionice=false&#xA;profile1.snapshots.ssh.nice=false&#xA;profile1.snapshots.ssh.path=&#xA;profile1.snapshots.ssh.port=22&#xA;profile1.snapshots.ssh.private_key_file=&#xA;profile1.snapshots.ssh.user=evzen&#xA;profile1.snapshots.use_checksum=true&#xA;profile1.snapshots.user_backup.ionice=false&#xA;profiles.version=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="578" LastEditDate="2016-12-30T05:57:13.843" LastActivityDate="2016-12-30T05:57:13.843" Title="Back in time doesn't make new snapshots" Tags="|software-installation|backup|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9755" PostTypeId="2" ParentId="9742" CreationDate="2016-12-17T14:47:43.133" Score="0" Body="&lt;p&gt;I wanted to install windows on my PC after the installation of Loki, but I found out that you cannot partition the SSD/HDD if Loki is currently running on it. I tried with gparted, but it did not work. If it is a fresh install I would suggest that you reinstall it again and try to partition it before the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;p.s. In the end I installed windows on another HDD, but then the booting time with Loki went to heaven. With windows on the second drive, Loki was booting in like 2 minutes (less than 15 seconds usually). Just keep that in mind.&lt;/p&gt;&#xA;" OwnerUserId="7537" LastActivityDate="2016-12-17T14:47:43.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9757" PostTypeId="1" CreationDate="2016-12-17T19:00:53.343" Score="2" ViewCount="565" Body="&lt;p&gt;I've configured Mail and Steam to open at elementary startup, the only problem is that they open as regular apps(popup window), I would like to configure they to open in &amp;quot;background mode&amp;quot;, so no popup should open at startp.&#xA;It's possible to do that ?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IENoh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IENoh.jpg&quot; alt=&quot;startup applications&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="808" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-03-14T09:22:41.240" Title="Startup applications: open programs in background mode" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9758" PostTypeId="2" ParentId="9757" CreationDate="2016-12-17T19:54:01.983" Score="3" Body="&lt;p&gt;I'm not sure what you intend, but if you want Mail to run in the background without opening the window, just set Preferences &gt; Always watch for new mail. And this way you can remove Mail from startup applications.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-12-17T19:54:01.983" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9759" PostTypeId="1" AcceptedAnswerId="9906" CreationDate="2016-12-17T20:00:03.463" Score="0" ViewCount="164" Body="&lt;p&gt;Sometimes I can't save log-in user names and passwords for sites, even if I click Save when prompted. For example for Flickr. I guess it's an Epiphany bug, but I couldn't find any information about it.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2016-12-28T13:11:44.873" Title="Is there a way to add log-in user names and passwords for sites in Epiphany?" Tags="|release-loki|security|epiphany|" AnswerCount="2" CommentCount="0" ClosedDate="2019-04-19T21:12:12.637" ContentLicense="CC BY-SA 3.0" />
  <row Id="9760" PostTypeId="2" ParentId="9759" CreationDate="2016-12-17T22:32:07.883" Score="0" Body="&lt;p&gt;I do not think this is a bug. Flicker needs a Yahoo account. Yahoo passwords are not stored (for security reasons, I think). First login to Yahoo and indicate that you will keep signed in. As long as you are logged in your Yahoo account, you will not need a separate login for Flicker. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW you can register or update your password in epiphany by entering your credentials on any site. The only missing function is that you can not view your saved passwords - or I do not know how to view them. So, for simplicity I regard this as a security feature. ;^)&lt;/p&gt;&#xA;" OwnerUserId="7756" LastActivityDate="2016-12-17T22:32:07.883" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9762" PostTypeId="2" ParentId="9742" CreationDate="2016-12-18T00:03:57.393" Score="0" Body="&lt;p&gt;You could use the KDE Partition Manager.It also works on eOS&lt;br&gt;&#xA;sudo apt-get install partitionmanager &lt;/p&gt;&#xA;" OwnerUserId="7471" LastActivityDate="2016-12-18T00:03:57.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9768" PostTypeId="1" AcceptedAnswerId="9976" CreationDate="2016-12-18T14:20:11.477" Score="0" ViewCount="629" Body="&lt;p&gt;I'm trying to install Elementary OS in an Acer Aspire F-15 laptop using a USB and following the steps that appear in the &lt;a href=&quot;https://elementary.io/en/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;official page&lt;/a&gt;. But after selecting the option of installing Elementary OS or the option of try without installing, the following error appears: &lt;code&gt;Unable to find a medium containing a live file system usb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tested the USB in another computer and Elementary OS works perfectly, so the problem might be in the configuration of my computer. Does anyone know which could be the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="7834" LastActivityDate="2017-06-30T23:35:21.290" Title="Unable to install Elementary OS in Acer Aspire F-15" Tags="|system-installation|usb|filesystem|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9769" PostTypeId="2" ParentId="5603" CreationDate="2016-12-18T16:02:08.230" Score="2" Body="&lt;p&gt;If you're still searching for a solution,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same problem of noise from my cheap microphone with Loki. I found the module &quot;module-echo-cancel&quot; which should do the job.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To test it, enter &quot;pacmd load-module module-echo-cancel&quot; in your terminal ; then you should have a new input device with &quot;echo cancelled&quot; in the name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're satisfied, you have to add &quot;load-module module-echo-cancel&quot; to your pulseaudio config file (for me, it's /etc/pulse/default.pa)&lt;/p&gt;&#xA;" OwnerUserId="7838" LastEditorUserId="7838" LastEditDate="2016-12-18T16:18:22.680" LastActivityDate="2016-12-18T16:18:22.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9770" PostTypeId="2" ParentId="9695" CreationDate="2016-12-18T21:21:31.663" Score="0" Body="&lt;p&gt;Did a bit of research because nobody was really replying anymore, and came with a solution, but it's a hard workaround, at least it works, but if you have a better solution, I will accept that answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not all steps have to be nessecary but I don't have the time to further check it out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is what I did:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I removed pantheon-greeter and installed unity-greeter.&lt;/li&gt;&#xA;&lt;li&gt;After reboot I reversed the process again&lt;/li&gt;&#xA;&lt;li&gt;Then in settings I declared this new hotkey: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/GZg2s.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GZg2s.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now I can lock and unlock!&lt;/p&gt;&#xA;" OwnerUserId="7767" LastActivityDate="2016-12-18T21:21:31.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9772" PostTypeId="2" ParentId="9768" CreationDate="2016-12-19T01:47:59.637" Score="-1" Body="&lt;p&gt;Set the BIOS to only use AHCI when booting. Some laptops have are set to work with the RAID controller only.&lt;/p&gt;&#xA;" OwnerUserId="7385" LastActivityDate="2016-12-19T01:47:59.637" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9773" PostTypeId="2" ParentId="5544" CreationDate="2016-12-19T01:51:31.200" Score="2" Body="&lt;p&gt;This feature was implemented in the version of Mail that ships with Loki. The solution is to upgrade to the latest release of elementary OS&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-19T01:51:31.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9774" PostTypeId="2" ParentId="7174" CreationDate="2016-12-19T01:57:25.703" Score="2" Body="&lt;p&gt;Firefox is already available in AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AppCenter doesn't support the installation of Snap packages at this time&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-19T01:57:25.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9775" PostTypeId="1" CreationDate="2016-12-19T03:51:37.683" Score="1" ViewCount="146" Body="&lt;p&gt;I have a question regarding drive mounts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Elementary on a separate SSD. 3 partitions - swap, file system and home.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then installed a 1TB hard drive. The drive was partitioned to ext4 and mounts as &lt;code&gt;/media/user1/Drive&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I then did was add another user - user2 as a standard desktop user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I log into user2, the drive appears in the sidebar of Files as &quot;Drive&quot; but when I click on it, I get a note something like you do not have permission etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I edited the &lt;code&gt;/etc/fstab&lt;/code&gt; to mount the drive at startup. Though I wanted to mount the drive as &lt;code&gt;/mnt/Drive&lt;/code&gt;. So that's what I put in the &lt;code&gt;/etc/fstab&lt;/code&gt; entry.&#xA;It worked, so user2 can access the drive through the folder &lt;code&gt;/mnt/Drive&lt;/code&gt; with full read write access but, it doesn't appear under Devices in Files sidebar. The orginal entry - &lt;code&gt;/media/user1/Drive&lt;/code&gt; - still appears in the sidebar but still no permission.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I would like to do is mount the drive for both users in &lt;code&gt;/mnt/Drive&lt;/code&gt; and have the drive appear under devices in the Files sidebar as Drive for both users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any reason why internal drive gets mounted as &lt;code&gt;/media/user1/Drive&lt;/code&gt; but then doesn't share it? Does it matter if it is changed to &lt;code&gt;/mnt/Drive&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help appreciated, best alternative solutions etc.&lt;/p&gt;&#xA;" OwnerUserId="7841" LastEditorUserId="578" LastEditDate="2017-02-09T16:41:35.783" LastActivityDate="2017-02-09T16:41:35.783" Title="Mounting internal drive to be shared between users" Tags="|release-loki|pantheon-files|mount|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9776" PostTypeId="1" AcceptedAnswerId="9781" CreationDate="2016-12-19T08:52:43.433" Score="3" ViewCount="3695" Body="&lt;p&gt;I'm looking for a clipboard manager that integrates well with Pantheon desktop. Can someone make any recommendation?&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2767" LastEditDate="2016-12-19T17:28:17.597" LastActivityDate="2021-12-09T13:44:12.067" Title="Clipboard manager with Pantheon integration" Tags="|pantheon|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9778" PostTypeId="1" CreationDate="2016-12-19T09:16:21.857" Score="6" ViewCount="2459" Body="&lt;p&gt;I'm on Loki and every time I turn on fullscreen mode for one of my applications like Chrome or atom, the fullscreen window moves to a new desktop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to stop this and just stay on the current desktop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;FL&lt;/p&gt;&#xA;" OwnerUserId="7842" LastActivityDate="2020-01-11T19:57:51.530" Title="How to disable desktop switch on fullscreen" Tags="|release-loki|desktop|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9780" PostTypeId="1" AcceptedAnswerId="9789" CreationDate="2016-12-19T17:08:26.013" Score="1" ViewCount="1032" Body="&lt;p&gt;Is there a way to do the above without removing the two-step authentication ?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="578" LastEditDate="2016-12-20T06:04:43.197" LastActivityDate="2016-12-20T06:04:43.197" Title="How to add Google Calendar in the Calendar app with two-step authentication?" Tags="|release-freya|release-loki|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9781" PostTypeId="2" ParentId="9776" CreationDate="2016-12-19T17:21:24.990" Score="1" Body="&lt;p&gt;Do you mean integrate well with Pantheon-desktop ?&#xA;&lt;br&gt;&#xA;I have been using Glipper for quite some time now. It's working fine.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install glipper&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go ahead. Try it out.&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2016-12-19T17:21:24.990" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9783" PostTypeId="2" ParentId="9678" CreationDate="2016-12-19T19:15:02.653" Score="1" Body="&lt;p&gt;Answering my own question here, in case someone else looks for a solution to this problem. Turns out, Slingshot doesn't play nice with ibus. All I had to do was run &lt;code&gt;killall ibus-daemon&lt;/code&gt; from the command line to disable ibus, and the problem was fixed.&lt;/p&gt;&#xA;" OwnerUserId="7758" LastActivityDate="2016-12-19T19:15:02.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9785" PostTypeId="2" ParentId="9776" CreationDate="2016-12-19T20:15:03.770" Score="5" Body="&lt;p&gt;You can use &quot;Clippy&quot; docklet in the dock (Plank).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Plank preferences by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt; and right/secondary clicking on Plank (or just run &lt;code&gt;plank --preferences&lt;/code&gt; in the Terminal) and go to Docklets tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7OLR4.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7OLR4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Drag and drop Clippy icon to the dock. Right-click on it will open simply clipboard manager.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-12-19T20:15:03.770" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9786" PostTypeId="2" ParentId="9778" CreationDate="2016-12-19T20:35:04.707" Score="6" Body="&lt;p&gt;You can deactivate this feature by disabling dynamic workspaces in gala preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open dconf Editor, if you have it, and go to &lt;code&gt;org&lt;/code&gt; -&gt; &lt;code&gt;pantheon&lt;/code&gt; -&gt; &lt;code&gt;desktop&lt;/code&gt; -&gt; &lt;code&gt;gala&lt;/code&gt; -&gt; &lt;code&gt;behavior&lt;/code&gt; and untick &lt;code&gt;dynamic-workspaces&lt;/code&gt; point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dCLPZ.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dCLPZ.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or just run follow command in the Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To revert this feature back tick &lt;code&gt;dynamic-workspaces&lt;/code&gt; point again or run &lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces true&lt;/code&gt; in the Terminal.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-12-19T20:35:04.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9787" PostTypeId="1" CreationDate="2016-12-19T20:52:10.820" Score="0" ViewCount="540" Body="&lt;p&gt;I have installed Elementary recently and all works wonderful. I only fight with this issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The cursor or mouse arrow is clicking constantly for a while. Then it mostly stops for a minute and comes again. Of course it is impossible to select a window or write a text. This problem does not appear right after system start. It often comes after a while or when I login again. Wherever I leave the mouse arrow it starts clicking. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I unplugged the mouse (apple mouse) and keyboard and it keeps on clicking. I investigated across the web, but could not find a solution. Thanks in advance for any hints. &lt;/p&gt;&#xA;" OwnerUserId="7848" LastActivityDate="2024-03-17T18:02:30.247" Title="Unexpected flickering mouse and constant clicking" Tags="|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9788" PostTypeId="1" CreationDate="2016-12-19T23:05:10.473" Score="1" ViewCount="128" Body="&lt;p&gt;I prefer wingpanel not being transparent, and have set org.pantheon.desktop.wingpanel.use-transparency to false.  Several times recently, and just after running updates today, my wingpanel became transparent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using dconf Editor to check the setting, it still showed false (not transparent).  Once I checked the box and then unchecked it, wingpanel was again opaque.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone else having this issue?  Is it update related or was that a conincidence?  Is there a different setting I should be using?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2016-12-19T23:05:10.473" Title="Wingpanel going transparent on its own" Tags="|wingpanel|updates|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9789" PostTypeId="2" ParentId="9780" CreationDate="2016-12-20T06:04:23.523" Score="2" Body="&lt;p&gt;You can do it by adding an app password that you are going to use in Calendar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://security.google.com/settings/security/apppasswords&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://security.google.com/settings/security/apppasswords&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-20T06:04:23.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9790" PostTypeId="2" ParentId="5563" CreationDate="2016-12-20T07:50:45.707" Score="1" Body="&lt;p&gt;This was a confirmed &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.20/+bug/109529&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt; in Elementary OS Freya when using nvidia-glx module. I had resolved it by following &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/586/once-locked-screen-stays-black-and-cannot-be-unlocked&quot;&gt;this&lt;/a&gt; post.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Run sudo -i scratch-text-editor /etc/default/acpi-support&#xA;Find and change POST_VIDEO=true to POST_VIDEO=false&#xA;Find and change SAVE_VBE_STATE=true to SAVE_VBE_STATE=false&#xA;Restart your laptop, issue should be solved.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I think that this is fixed in Loki.&lt;/p&gt;&#xA;" OwnerUserId="7625" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-20T07:50:45.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9791" PostTypeId="1" CreationDate="2016-12-20T07:53:03.550" Score="2" ViewCount="1507" Body="&lt;p&gt;I'm looking for a toggle shortcut - hide/show Plank dock via keyboard. How can I implement this feature? To make it clear I want to Plank behaves same way as if I use a mouse cursor on it in Intelligent Hide mode.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-01-04T13:46:59.423" Title="Plank dock - hiding and showing by custom keyboard shortcut" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9792" PostTypeId="2" ParentId="8887" CreationDate="2016-12-20T08:42:44.203" Score="2" Body="&lt;p&gt;KeePass2 is missing in AppCenter because &lt;code&gt;keepass2&lt;/code&gt; package doesn't supply AppStream metadata. You need to contact KeePass2 developers and inform them of this issue or just wait until someone will report about this.&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-12-20T08:42:44.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9794" PostTypeId="1" CreationDate="2016-12-20T10:04:33.523" Score="0" ViewCount="3133" Body="&lt;p&gt;The latest updates missing some settings from app.css for wingpanel as well as from dconf. In what direction to go to change the panel since the screenshots?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rHjDp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rHjDp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cF58T.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cF58T.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sorry for my English&lt;/p&gt;&#xA;" OwnerUserId="7854" LastEditorUserId="308" LastEditDate="2018-08-07T17:01:00.400" LastActivityDate="2018-08-07T17:01:00.400" Title="Editing (customization) wingpanel elementary OS 0.4 Loki" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9795" PostTypeId="1" CreationDate="2016-12-20T13:47:09.360" Score="4" ViewCount="872" Body="&lt;p&gt;I just got alerted to two updates but the update page in the AppCenter is blank, even though regular app pages work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried using the software updater which got one of the two updates in, but I can't get the other update in nor can I figure out why the updates page is empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody have any ideas?&lt;/p&gt;&#xA;" OwnerUserId="7856" LastActivityDate="2017-02-18T11:37:22.090" Title="Loki AppCentre updates page blank, can't do 1 update" Tags="|updates|appcenter|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9796" PostTypeId="2" ParentId="9105" CreationDate="2016-12-20T14:16:10.863" Score="3" Body="&lt;p&gt;I'm on Loki and got the same problem.&#xA;Apparently I solved using the &lt;a href=&quot;https://www.privateinternetaccess.com/pages/client-support/robolinux&quot; rel=&quot;nofollow noreferrer&quot;&gt;RoboLinux installation method&lt;/a&gt; as listed on PIA support site.&#xA;I'm connected to VPN right now. &#xA;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="7857" LastActivityDate="2016-12-20T14:16:10.863" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9797" PostTypeId="2" ParentId="7628" CreationDate="2016-12-20T16:12:51.580" Score="1" Body="&lt;p&gt;Instead of using xbind keys as @GZgidnick suggested, you can also use &quot;AudioRaiseVolume&quot; in dconf-editor instead of the value from xbindkeys as @GZgidnick explains above.  Others are:&lt;br/&gt;&#xA;&quot;AudioLowerVolume&quot; &lt;br/&gt;&#xA;&quot;AudioMute&quot;&lt;br/&gt;&#xA;&quot;AudioPlay&quot;&lt;br/&gt;&#xA;&quot;AudioNext&quot;&lt;br/&gt;&#xA;&quot;AudioPrevious&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At least those worked for my Apple Keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps!&lt;/p&gt;&#xA;" OwnerUserId="5736" LastEditorUserId="5736" LastEditDate="2017-01-04T17:24:14.033" LastActivityDate="2017-01-04T17:24:14.033" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9798" PostTypeId="2" ParentId="9775" CreationDate="2016-12-20T16:40:01.060" Score="2" Body="&lt;p&gt;Try method described here: &lt;a href=&quot;https://askubuntu.com/questions/351991/mounting-disk-drives-among-different-users&quot;&gt;https://askubuntu.com/questions/351991/mounting-disk-drives-among-different-users&lt;/a&gt;. It worked OK for me. Note however that the last command given should be &lt;code&gt;sudo chgrp &amp;lt;groupname&amp;gt; &amp;lt;mountpoint&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-09T16:40:43.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9799" PostTypeId="1" CreationDate="2016-12-20T19:37:42.023" Score="1" ViewCount="790" Body="&lt;p&gt;What is a command for enabling tap-to-click through console please? My trackpad's left/right buttons don't work on my laptop and I currently don't have a mouse at home I could use so I need it to be enabled. Without ttap-to-click I can't use my elementary os.&lt;/p&gt;&#xA;" OwnerDisplayName="user7833" LastActivityDate="2016-12-20T22:30:34.827" Title="Tap to click enabling with console Command" Tags="|touchpad|command-line|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9800" PostTypeId="1" AcceptedAnswerId="9916" CreationDate="2016-12-20T19:40:52.847" Score="1" ViewCount="72" Body="&lt;p&gt;Specifically I'm using my MacBook Pro Retina and another 1080p monitor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However the scaling on the secondary monitor seems to match the primary monitor, causing any windows on the secondary monitor to be scaled up and look extremely large.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help. &lt;/p&gt;&#xA;" OwnerUserId="7860" LastActivityDate="2018-11-18T18:47:08.063" Title="Dual monitors with different PPIs" Tags="|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9801" PostTypeId="1" CreationDate="2016-12-20T20:15:18.610" Score="6" ViewCount="5970" Body="&lt;p&gt;I would like to have a divider line in my dock for separation. Is this possible? I have checked dconf and have not found anything there. I have checked the preferences of the dock and I do not see anything there either. Is this in the backlog to implement?&lt;/p&gt;&#xA;" OwnerUserId="7396" LastActivityDate="2020-10-27T12:58:22.310" Title="Add divider to plank(dock)" Tags="|plank|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9802" PostTypeId="2" ParentId="9799" CreationDate="2016-12-20T20:50:21.510" Score="1" Body="&lt;p&gt;&lt;br&gt; I hope your keyboard works for that's what the following method uses.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the steps you need to do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;space&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;Search and Open Settings by pressing &lt;kbd&gt;Enter&lt;/kbd&gt; or &lt;kbd&gt;Return&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;In settings, Press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; and Enter &quot;Mouse&quot;&lt;/li&gt;&#xA;&lt;li&gt;Using Keyboard Arrows select and open &quot;Mouse and Track pad Settings&quot;&lt;/li&gt;&#xA;&lt;li&gt;Once there, use the Tab key to select the &quot;Tap to Click&quot; Setting&lt;/li&gt;&#xA;&lt;li&gt;Use &lt;kbd&gt;Spacebar&lt;/kbd&gt; to toggle the setting on.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2016-12-20T20:50:21.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9803" PostTypeId="1" AcceptedAnswerId="9816" CreationDate="2016-12-20T20:52:13.453" Score="0" ViewCount="11132" Body="&lt;p&gt;&lt;strong&gt;NOTE:&lt;/strong&gt; Before you mark the question duplicate and give me the link to this solution: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7472/install-nvidia-dual-graphics-driver-on-loki&quot;&gt;Install Nvidia dual-graphics driver on Loki?&lt;/a&gt; I have to state that I tried it and it automatically installed &lt;strong&gt;nvidia-367&lt;/strong&gt; drivers but the &lt;strong&gt;nvidia-settings&lt;/strong&gt; panel did not show any configurations or settings, meaning that the new drivers were not properly installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i'm asking you, is there anyone who is using Loki (up-to-date) with Intel HD + NVIDIA cards and managed to install NVIDIA drivers and use &lt;strong&gt;optimus&lt;/strong&gt; or &lt;strong&gt;bumblebee&lt;/strong&gt; or any means to achieve successful switching between graphics cards?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This solution: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7967/how-can-i-switch-between-intel-and-nvidia-graphics-card?rq=1&quot;&gt;How can i switch between Intel and Nvidia Graphics card?&lt;/a&gt; also suggests the same thing but I don't see any &quot;PRIME-profiles&quot; (or any other profiles or settings) in the NVIDIA X Server Settings panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if anyone knows, can someone explain why is it so hard to successfully install latest NVIDIA drivers without getting black screens, login loops and many other problems? I tried and also read many questions and solutions about this problem, but the solutions are neither permanent nor simple.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;By the way:&lt;/strong&gt; I have ASUS UX303UB, I don't know if this is an issue with this laptop model.&lt;/p&gt;&#xA;" OwnerUserId="7861" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2016-12-22T15:34:09.227" Title="Using Intel HD Graphics + NVIDIA GPU with Loki" Tags="|release-loki|nvidia|intel|bumblebee|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9804" PostTypeId="2" ParentId="9799" CreationDate="2016-12-20T22:30:34.827" Score="3" Body="&lt;p&gt;You can enable tap-to-click with follow command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.peripherals.touchpad tap-to-click true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-12-20T22:30:34.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9806" PostTypeId="1" AcceptedAnswerId="9950" CreationDate="2016-12-21T06:02:12.233" Score="2" ViewCount="838" Body="&lt;p&gt;I've been playing with Loki for a few days and generally like it on my new chromebook replacement (HP Stream 11), so I'll probably be popping in here to ask a few more questions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This one is about this (apparently) notoriously finicky wireless card. All the fixes I'm finding with search have led me to broken links or suggestions to use commands that eOS doesn't understand? &lt;code&gt;cd&lt;/code&gt; doesn't seem to work in terminal, f'ex. Not sure what it does at any rate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found the new version of one of the fixes, an &quot;rtlwifi&quot; fix from github. I realize that I have no idea how to run it. So my one question is: how do I run the extracted files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem with the driver is that the signal strength is really, really weak. As in, I need to be within 5-10 feet of the router to get even just a little bit of signal. It doesn't drop - it's just weak as hell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there are other suggestions, too, I'm all ears.&lt;/p&gt;&#xA;" OwnerUserId="7863" LastActivityDate="2018-05-24T15:08:38.800" Title="Newbie Q re: a RTL8723BE wifi fix, and how to install one" Tags="|release-loki|wifi|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9807" PostTypeId="2" ParentId="9787" CreationDate="2016-12-21T09:20:39.720" Score="0" Body="&lt;p&gt;It looks as if the reason was my optical mouse. I used no mouse pad and somehow it started flickering after a while. I started using a mouse pad and it woks now just fine. &lt;/p&gt;&#xA;" OwnerUserId="7848" LastActivityDate="2016-12-21T09:20:39.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9810" PostTypeId="2" ParentId="7177" CreationDate="2016-12-21T13:56:54.350" Score="0" Body="&lt;p&gt;I prefer the below method and find it simple; install gnome-panel by launching your terminal and enter the below command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --no-install-recommends gnome-panel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that, enter the following command to add GNS3 into Apps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gnome-desktop-item-edit /usr/share/applications/ --create-new&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A dialogue box will appear where&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Select an Icon to use for GNS3.&lt;/li&gt;&#xA;&lt;li&gt;Select the type of launcher, In this case we will be using “Application”.&lt;/li&gt;&#xA;&lt;li&gt;Give the launcher a name, in this case GNS3.&lt;/li&gt;&#xA;&lt;li&gt;This is the command we will run when clicking on the launcher, “gns3” will run GNS3 as root.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Click ok and the launcher will be created.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: icon can be downloaded from google [searching gns3 icon for linux; prefer 256x256 res ] &lt;/p&gt;&#xA;" OwnerUserId="7868" LastEditorUserId="578" LastEditDate="2016-12-21T14:15:13.257" LastActivityDate="2016-12-21T14:15:13.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9814" PostTypeId="1" CreationDate="2016-12-21T16:49:16.233" Score="0" ViewCount="76" Body="&lt;p&gt;The cursor works on Windows but stops when I boot up elementary. I have seen other people have the same problem after they suspend their system but none of the solutions worked for me&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would appreciate the help&lt;/p&gt;&#xA;" OwnerUserId="7873" LastActivityDate="2016-12-23T21:42:11.060" Title="Freya cursor not moving" Tags="|system|" AnswerCount="2" CommentCount="0" ClosedDate="2016-12-28T18:21:01.840" ContentLicense="CC BY-SA 3.0" />
  <row Id="9815" PostTypeId="2" ParentId="9806" CreationDate="2016-12-21T20:20:53.670" Score="0" Body="&lt;p&gt;Actually, Loki should install on it's own the driver since it's a problematic one(RTL8723BE)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check &lt;a href=&quot;https://askubuntu.com/questions/590414/wifi-problems-with-rtl8723be-in-ubuntu-14-04&quot;&gt;the first answer, it will help you.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4413" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-12-21T20:20:53.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9816" PostTypeId="2" ParentId="9803" CreationDate="2016-12-21T20:55:58.057" Score="0" Body="&lt;p&gt;So, I actually made it.&lt;/p&gt;&#xA;&lt;p&gt;First, I have removed everything related with nvidia&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get remove bumblebee (if installed)&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get remove nvidia*&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;First, following this solution: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7548/7861&quot;&gt;https://elementaryos.stackexchange.com/a/7548/7861&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo ubuntu-drivers list&lt;/p&gt;&#xA;&lt;p&gt;sudo ubuntu-drivers autoinstall&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;NOTE:&lt;/strong&gt; I forgot to mention that, when I was installing nvidia-367 drivers, terminal prompted me to turn off UEFI secure boot. After the reboot, Secure boot was disabled. Maybe it has something to do with the secure boot. (Some digging in google shows that secure boot sometimes restricts the OS to access third party features.&lt;/p&gt;&#xA;&lt;p&gt;And then installing primus with:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install primus&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;With primus, bumblebee is also installed.&lt;/p&gt;&#xA;&lt;p&gt;Next, edit &lt;strong&gt;/etc/bumblebee/bumblebee.conf&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;driver=nvidia&lt;/p&gt;&#xA;&lt;p&gt;KernelDriver=nvidia-&lt;strong&gt;367&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;LibraryPath=/usr/lib/nvidia-&lt;strong&gt;367&lt;/strong&gt;:/usr/lib32/nvidia-&lt;strong&gt;367&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;XorgModulePath=/usr/lib/nvidia-&lt;strong&gt;367&lt;/strong&gt;/xorg,/usr/lib/xorg/modules&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;NOTE: nvidia-367&lt;/strong&gt; is my version, you should change the numbers for your nvidia driver version&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;After all these steps, I could finally see the &amp;quot;&lt;strong&gt;PRIME Profiles&lt;/strong&gt;&amp;quot; section in nvidia-settings screen. When I run &lt;strong&gt;glxgears&lt;/strong&gt;, &lt;strong&gt;primusrun glxgears&lt;/strong&gt; or &lt;strong&gt;optirun glxgears&lt;/strong&gt;, I get different FPS values (much higher with optirun) and I guess it shows that it is finally working.&lt;/p&gt;&#xA;" OwnerUserId="7861" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2016-12-22T15:34:09.227" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9818" PostTypeId="1" CreationDate="2016-12-21T23:23:10.820" Score="1" ViewCount="115" Body="&lt;p&gt;Bit of a newbie question, but I am trying to build &lt;a href=&quot;https://code.launchpad.net/~writer-devs/writer/trunk&quot; rel=&quot;nofollow noreferrer&quot;&gt;Writer&lt;/a&gt; to play around with. I followed the build/installation instructions , but am getting the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CMakeFiles/writer.dir/src/Widgets/TableToolBar.c.o: In function `writer_widgets_table_tool_bar_construct':&#xA;/home/cameron/Sites/writer-dev/install/src/Widgets/TableToolBar.c:405: undefined reference to `gtk_widget_set_focus_on_click'&#xA;CMakeFiles/writer.dir/src/Widgets/TextToolBar.c.o: In function `writer_widgets_text_tool_bar_setup_ui':&#xA;/home/cameron/Sites/writer-dev/install/src/Widgets/TextToolBar.c:442: undefined reference to `gtk_widget_set_focus_on_click'&#xA;/home/cameron/Sites/writer-dev/install/src/Widgets/TextToolBar.c:456: undefined reference to `gtk_widget_set_focus_on_click'&#xA;/home/cameron/Sites/writer-dev/install/src/Widgets/TextToolBar.c:470: undefined reference to `gtk_widget_set_focus_on_click'&#xA;/home/cameron/Sites/writer-dev/install/src/Widgets/TextToolBar.c:484: undefined reference to `gtk_widget_set_focus_on_click'&#xA;collect2: error: ld returned 1 exit status&#xA;CMakeFiles/writer.dir/build.make:612: recipe for target 'writer' failed&#xA;make[2]: *** [writer] Error 1&#xA;CMakeFiles/Makefile2:67: recipe for target 'CMakeFiles/writer.dir/all' failed&#xA;make[1]: *** [CMakeFiles/writer.dir/all] Error 2&#xA;Makefile:160: recipe for target 'all' failed&#xA;make: *** [all] Error 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/baedert/corebird/issues/531&quot; rel=&quot;nofollow noreferrer&quot;&gt;A bit of googling&lt;/a&gt; seems to indicate that this is caused by my GTK3 version (3.18.9-1ubuntu3.1) and my Vala version (0.34.4 0ubuntu1~16.04~valateam1) having some sort of conflict with &lt;code&gt;gtk_widget_set_focus_on_click&lt;/code&gt;. What's the best way to resolve this?&lt;/p&gt;&#xA;" OwnerUserId="7878" LastEditorUserId="578" LastEditDate="2016-12-22T06:15:31.807" LastActivityDate="2016-12-22T20:39:22.480" Title="Changing Vala or GTK version to compile" Tags="|gtk|vala|" AnswerCount="0" CommentCount="1" ClosedDate="2016-12-26T18:06:46.410" ContentLicense="CC BY-SA 3.0" />
  <row Id="9819" PostTypeId="2" ParentId="8924" CreationDate="2016-12-22T00:35:21.113" Score="3" Body="&lt;p&gt;I resolved this issue (Yoga 2) by disabling rotation via three gsetting commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.peripherals.touchscreen orientation-lock true&#xA;&#xA;gsettings set com.ubuntu.touch.system orientation-lock 'PrimaryOrientation'&#xA;&#xA;gsettings set com.ubuntu.touch.system rotation-lock true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can check if those settings have changed with command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep '\-lock' | grep true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then finally:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When the system boots back into elementary you should be rotate free. &lt;/p&gt;&#xA;" OwnerUserId="7879" LastEditorUserId="7879" LastEditDate="2016-12-25T01:01:56.860" LastActivityDate="2016-12-25T01:01:56.860" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9820" PostTypeId="1" CreationDate="2016-12-22T01:12:48.947" Score="4" ViewCount="465" Body="&lt;p&gt;I installed loki x64 on a Gateway NE 522 with AMD A4 5000.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I added kodi, boot-repair, and seahorse.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;      sudo apt-get install software-properties-common&#xA;      sudo add-apt-repository ppa:team-xbmc/ppa&#xA;      sudo apt-get update&#xA;      sudo apt-get install kodi&#xA;      sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;      sudo apt-get update&#xA;      sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&#xA;      sudo apt-get install seahorse  &#xA;      seahorse  &#xA;      locate fusion  &#xA;      locate hubwiz  &#xA;      sudo shutdown -r now  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I restored a kodi - &lt;code&gt;xbmc&lt;/code&gt; - &lt;code&gt;xmlbackup&lt;/code&gt; from another computer.&#xA;Then, I used fusion installer to then install/run config wizard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes, Kodi will not respond to mouse clicks. Then the whole desktop will not respond to mouse clicks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing seems to make it work. Switch to tty1, or tty6, back to tty7, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a minute or some number of minutes, pantheon or the desktop ( or whatever the correct term is ) seems to restart by itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I define this problem more precisely?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I troubleshoot this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I asking the right question in the right place?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks,&lt;/p&gt;&#xA;" OwnerUserId="7880" LastEditorUserId="16827" LastEditDate="2019-01-09T10:02:44.117" LastActivityDate="2020-05-16T23:06:30.667" Title="Pantheon Desktop shell unresponsive / hang / freeze when using kodi" Tags="|release-loki|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9822" PostTypeId="1" AcceptedAnswerId="9848" CreationDate="2016-12-22T08:46:18.570" Score="1" ViewCount="229" Body="&lt;p&gt;If I leave my home and go to my friend's the &quot;Entire-Network&quot; will continue to show my samba shares from home, I've tried killing Files and pantheon-files-daemon, but it still persists. Is there a way to refresh it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Freya, also wondering if this persists in Loki?&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2016-12-23T18:37:28.317" Title="Is there a way to refresh the Pantheon-Files &quot;Entire-Network&quot;" Tags="|pantheon-files|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9823" PostTypeId="1" CreationDate="2016-12-22T13:20:23.397" Score="1" ViewCount="55" Body="&lt;p&gt;I am a novice with Linux (I have elementary OS 0.3.2 Freya 64bit) and I can't solve a problem occurring during the installation of a software suite called 'Demeter' (X-ray spectroscopy data analysis). Even though there is a very detailed and simple guide on the site that explain how to install the software for Ubuntu 12.04 OS, it seems that it does not work for me (code lines not compatible with my OS?).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Guide web address: &lt;a href=&quot;https://bruceravel.github.io/demeter/documents/SinglePage/demeter_nonroot.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bruceravel.github.io/demeter/documents/SinglePage/demeter_nonroot.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the first section 'preparing your machine', for the first command (the 'apt-get install ... ' line) everything seems to go well. But when I want to set-up the local copy of Perl I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flibuque@flibuque-X302LA:~$ cd&#xA;flibuque@flibuque-X302LA:~$ pwd&#xA;/home/flibuque&#xA;flibuque@flibuque-X302LA:~$ echo 'eval $(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)' &amp;gt;&amp;gt; ~/.bashrc&#xA;flibuque@flibuque-X302LA:~$ source ~/.bashrc&#xA;bash: /home/flibuque/.bashrc: line 168: syntax error near unexpected token `$(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)'&#xA;bash: /home/flibuque/.bashrc: line 168: `esaceval $(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)'&#xA;flibuque@flibuque-X302LA:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Do you have a idea of what I could do here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Besides since then every times I open the terminal I have the the line 6) and 7) showing up at the top of the 'flibuque@flibuque-X302LA:'...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is welcome! Thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sylvain&lt;/p&gt;&#xA;" OwnerUserId="7883" LastEditorUserId="578" LastEditDate="2016-12-23T09:09:13.800" LastActivityDate="2016-12-25T15:54:54.310" Title="Problem software instalation 'Demeter'" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9827" PostTypeId="1" AcceptedAnswerId="10919" CreationDate="2016-12-22T17:21:21.803" Score="4" ViewCount="586" Body="&lt;p&gt;I installed MS Office using Play on Linux, but when I click on my file (.docx or other) for &quot;&lt;em&gt;open with: Microsoft Word&lt;/em&gt;&quot;, there isn't in the possible choices!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to open directly the file without open first Microsoft Word (and select: &lt;em&gt;open file -&gt; myfile.docx&lt;/em&gt;)?&lt;/p&gt;&#xA;" OwnerUserId="6614" LastActivityDate="2017-04-04T23:03:12.677" Title="Set MS Office as predefined" Tags="|office|playonlinux|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9828" PostTypeId="1" CreationDate="2016-12-22T18:49:11.727" Score="1" ViewCount="361" Body="&lt;p&gt;I recently got my hands on a 3.2 Ghz Pentium D with 4 Gigs of Ram.(3.25 allocated in windows for some reason) Has anyone had any success running Elementary OS loki on and older computer. I find my self always going back to Lubuntu and not really enjoying it. I am going to install it this weekend because I will have to make a bootable DVD because for some reason its super hard to boot from a USB on old Sony Vaios. I much rather run ElementaryOS that Lubuntu and I believe im board with LinuxMint. Any Opinions would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="7887" LastActivityDate="2016-12-22T19:22:25.410" Title="ElementaryOS on Pentium D" Tags="|vaio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9830" PostTypeId="2" ParentId="9828" CreationDate="2016-12-22T19:22:25.410" Score="1" Body="&lt;p&gt;You should be fine! The &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;minimum system specs&lt;/a&gt; are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;1 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;15 GB of disk space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The Pentium D is 64-bit, which is the only hard processor limitation. 4GB of RAM is of course way over the minimum specs. You can always boot into the live DVD to be sure, but you should be fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;YouTube has a &lt;a href=&quot;https://www.youtube.com/watch?v=9KMrTfFwYxY&quot; rel=&quot;nofollow noreferrer&quot;&gt;video of someone installing elementary OS Loki on a Sony Vaio&lt;/a&gt;, and everything seemed to go pretty smoothly.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-12-22T19:22:25.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9831" PostTypeId="1" CreationDate="2016-12-22T19:22:39.560" Score="0" ViewCount="145" Body="&lt;p&gt;Hello :) Just a few quick questions/suggestions, sorry about any grammatical mistakes, my english isn't too good but I'm learning &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I love the elementary os, i'm a huge fan! Thank you for creating it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just wondering if at some point something like AppImage or similar may be added to Elementary OS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe like some kind of plug &amp;amp; play native/universal app format that allows the option of quick app installation like in ios or android or windows instead of having to build the executables or install from the repositories. Some way to make it possible to just click on a button in an app store to purchase &amp;amp; it installs right away&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It could potentially open the door for an app store for elementary os &amp;amp; drive more revenue for you. I'd definitely be interested in buying from your app store. If you decide to do this, i'm sure lots of other people would love such a feature too. It would give people a better alternative to just the ios or android or windows &amp;amp; all the issues that come with those platforms&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the Vulkan api already built into elementary os? I'm interested in creating game apps specifically for the elementary os&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also will elementary os be coming to mobile in the future? If so, i'd be very interested &amp;amp; i think you could potentially kick google's, micro$haft's &amp;amp; apple's a$$ets all over the place &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for hearing me out &amp;amp; for creating such an awesome os, you guys rock!&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Ayame&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="7886" LastEditorUserId="7886" LastEditDate="2016-12-22T20:10:42.407" LastActivityDate="2016-12-22T20:10:45.117" Title="Native/universal app format or easier to install apps for elementary os, plus a few other quick questions" Tags="|applications|software-installation|appcenter|development|games|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-26T18:00:38.030" ContentLicense="CC BY-SA 3.0" />
  <row Id="9832" PostTypeId="1" CreationDate="2016-12-22T19:29:16.773" Score="1" ViewCount="50" Body="&lt;p&gt;I would like to block access to all apps except google chrome in my office, so that unnecessary time is not spent in the office premises. Is there any app or code by which this can be accomplished in Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="7889" LastActivityDate="2016-12-23T17:51:21.650" Title="Blocking apps for users in an office" Tags="|release-loki|system-installation|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9833" PostTypeId="2" ParentId="9831" CreationDate="2016-12-22T20:10:45.117" Score="1" Body="&lt;p&gt;AppImages can run on elementary and other major distros today. Cody Garver from the elementary team &lt;a href=&quot;http://blog.elementary.io/post/151395260651/weve-joined-the-snap-format-tob&quot; rel=&quot;nofollow noreferrer&quot;&gt;sits on the Snap Format oversight board&lt;/a&gt;, although elementary hasn't committed to using Snaps in the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next step for AppCenter is Houston, which should make it much easier to publish apps for elementary. The idea is to turn the app center into a pay-what-you-want app store. See &lt;a href=&quot;https://github.com/elementary/houston&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/houston&lt;/a&gt; for details on that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Founder Daniel Foré has this to say about elementary on mobile &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/4s4skf/elementary_os_for_mobiles_like_ubuntu_touch/d56tefm/&quot; rel=&quot;nofollow noreferrer&quot;&gt;(full answer)&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I'd love to do mobile, but it's not something we can just jump into doing straight away.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="792" LastActivityDate="2016-12-22T20:10:45.117" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9835" PostTypeId="2" ParentId="9691" CreationDate="2016-12-22T22:32:45.297" Score="1" Body="&lt;p&gt;Run the following command to get the UUID of your swap partition:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -l /dev/disk/by-uuid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit your &lt;code&gt;/etc/fstab&lt;/code&gt; and change the uuid&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# swap was on /dev/sdax during installation&#xA;UUID=put_the uuid_here none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Assign the new uuid ( change &lt;code&gt;sdax&lt;/code&gt; with yours) &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;swapoff /dev/sdax&#xA;mkswap -U put_the_uuid_here /dev/sdax&#xA;swapon -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2016-12-22T22:32:45.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9837" PostTypeId="2" ParentId="9823" CreationDate="2016-12-23T09:16:38.590" Score="1" Body="&lt;p&gt;You should open your ~/.bashrc file with a text editor and correct the last line (line 168) so that there are two separate lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;esac&#xA;eval $(perl -I$HOME/perl5/lib/perl5 -Mlocal::lib)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem is that there was no newline at the end of the file so when you appended the line starting with &lt;code&gt;eval&lt;/code&gt; as suggested it did get mixed up with the last line &lt;code&gt;esac&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-23T09:16:38.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9838" PostTypeId="2" ParentId="9274" CreationDate="2016-12-23T09:34:48.330" Score="1" Body="&lt;p&gt;To install the Mediatek MT7630E Wifi driver on elementary , you should follow the steps described on the &lt;a href=&quot;https://github.com/neurobin/MT7630E&quot; rel=&quot;nofollow noreferrer&quot;&gt;github repo&lt;/a&gt;  :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to disable the secure boot from the BIOS settings then connect to the internet. Open the terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git build-essential&#xA;git clone https://github.com/neurobin/MT7630E.git&#xA;cd MT7630E/&#xA;chmod +x install test uninstall&#xA;sudo ./install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2016-12-23T09:34:48.330" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9839" PostTypeId="1" CreationDate="2016-12-23T11:00:50.333" Score="1" ViewCount="151" Body="&lt;p&gt;I've switched to Epiphany from Vivaldi few days ago and I'm a bit confused, because every time I start a sentence (It means that I use capital letter ;) - I know some people don't stick to this grammar rule) eg. in facebook message box, I get doubled capital letter ('KK', 'LL' etc.).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've noticed that it's connected with SHIFT key, because it doubles ?, &quot;, _ too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions how to repair that? &#xA;I'd be grateful for help! :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-09T19:33:28.607" Title="Epiphany doubled capital letters" Tags="|keyboard|epiphany|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9840" PostTypeId="2" ParentId="9814" CreationDate="2016-12-23T11:07:47.567" Score="1" Body="&lt;p&gt;It's a well-known bug on Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't fix that, but pressing CTRL+ALT+F1 (you enter the CLI interface) and then CTRL+ALT+F7 (to enter again the GUI) helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem with cursor appears also after locking and hibernating my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend Loki - I didn't experience any bugs like that. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-23T11:07:47.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9841" PostTypeId="2" ParentId="9703" CreationDate="2016-12-23T11:13:58.847" Score="1" Body="&lt;p&gt;I use HP  Officejet and in my case I just plugged the printer and clicked print - It worked without installing any software. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-23T11:13:58.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9843" PostTypeId="1" CreationDate="2016-12-23T15:00:59.053" Score="1" ViewCount="12008" Body="&lt;p&gt;when entering commands &quot;wingpanel&quot; here is a log appears. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/7JCkJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7JCkJ.png&quot; alt=&quot;window error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7894" LastActivityDate="2017-06-05T02:29:28.317" Title="Missing the top panel. how to return the panel?" Tags="|wingpanel|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="9844" PostTypeId="1" CreationDate="2016-12-23T16:04:55.153" Score="3" ViewCount="287" Body="&lt;p&gt;In Elementary, some apps have a close button while others... don't. Why is that? Is that a bug or a deliberate design decision? I can still close the app by right-clicking the title bar and clicking close but that is much more tedious than it needs to be IMO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, please see below picture:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pTsDu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pTsDu.png&quot; alt=&quot;settings window without any close button&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7815" LastActivityDate="2016-12-25T14:03:00.600" Title="Why do some apps have no close button?" Tags="|release-loki|design|user-interface|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9846" PostTypeId="2" ParentId="9832" CreationDate="2016-12-23T17:51:21.650" Score="1" Body="&lt;p&gt;elementary OS ships with a feature called &lt;strong&gt;Parental Control&lt;/strong&gt;. Naming aside, this should also work great in an office scenario.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a non-administrator user for the employee.&lt;/li&gt;&#xA;&lt;li&gt;As the administrator user, open &lt;strong&gt;System Settings&lt;/strong&gt; &gt; &lt;strong&gt;Parental Control&lt;/strong&gt; and set up the rules you'd like for the employee user.&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;Optional.&lt;/em&gt; Log into the employee account and ensure it's working as expected.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="308" LastActivityDate="2016-12-23T17:51:21.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9847" PostTypeId="1" CreationDate="2016-12-23T18:33:25.050" Score="1" ViewCount="25" Body="&lt;p&gt;While it makes a lot of sense to me that launcher icons are hidden from the desktop because of the easy app menu access, I think that I will greatly miss being able to store files on the desktop temporarily for ease of access. &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there a way to get this functionality back or is there a sensible&#xA;  alternative for temporary file storage with quick access?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="7896" LastActivityDate="2016-12-23T18:33:25.050" Title="Alternative to desktop for file storage or how can I enable storing files on the desktop?" Tags="|desktop|files|" AnswerCount="0" CommentCount="0" ClosedDate="2016-12-26T17:59:32.700" ContentLicense="CC BY-SA 3.0" />
  <row Id="9848" PostTypeId="2" ParentId="9822" CreationDate="2016-12-23T18:37:28.317" Score="1" Body="&lt;p&gt;Try killing the gvfs process.  It will automatically restart when needed.  I haven't had a chance to test this but hopefully it will work.  You could also try disabling and re-enabling networking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Files just shows whatever gvfs gives to it so it is not really a bug in Files as such (unless other file managers do not suffer from the problem).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2016-12-23T18:37:28.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9849" PostTypeId="2" ParentId="9844" CreationDate="2016-12-23T20:31:49.070" Score="0" Body="&lt;p&gt;I'm not exactly sure it will help you or not. Install Tweaks.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks  &#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;System Settings--&gt;Tweaks--&gt;Appearance--&gt;Layout&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select an option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H7VbW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H7VbW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7854" LastActivityDate="2016-12-23T20:31:49.070" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9850" PostTypeId="2" ParentId="9814" CreationDate="2016-12-23T21:42:11.060" Score="1" Body="&lt;p&gt;It's a known bug. The only way I could fix it was installing Loki. If you don't want to, you can restore the cursor by following this steps:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Press Ctrl + Alt + F1&lt;/li&gt;&#xA;&lt;li&gt;Press Ctrl + Alt + F7&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You should now have the cursor restored and working, and yes, you have to do this every time it happens&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-12-23T21:42:11.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9851" PostTypeId="2" ParentId="601" CreationDate="2016-12-24T06:57:10.967" Score="1" Body="&lt;p&gt;If you have &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary Tweaks&lt;/a&gt; then you can go to &lt;strong&gt;&lt;em&gt;Terminal&lt;/em&gt;&lt;/strong&gt; and enable &lt;strong&gt;&lt;em&gt;Follow last tab&lt;/em&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iuXGv.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iuXGv.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4277" LastActivityDate="2016-12-24T06:57:10.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9852" PostTypeId="1" CreationDate="2016-12-24T10:26:56.180" Score="1" ViewCount="298" Body="&lt;p&gt;I have installed Loki on my MacBook Pro mid 2012.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Danish keyboard layout for Mac doesn't work for me, as I cannot use &lt;kbd&gt;@&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Danish keybord has an option to write &lt;kbd&gt;@&lt;/kbd&gt;, but it doesn't seem to work.... Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zSWui.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zSWui.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7897" LastEditorDisplayName="user170" LastEditDate="2017-02-17T09:50:33.677" LastActivityDate="2017-02-17T09:50:33.677" Title="Cannot write @ on the Danish Mac Keybord layout" Tags="|release-loki|keyboard|macbook|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9854" PostTypeId="1" CreationDate="2016-12-24T15:01:28.310" Score="0" ViewCount="134" Body="&lt;p&gt;In the last week or so I started having problems with Loki while booting. The laptop (Lenovo Z50-70) boots to the desktop, but only the background image is shown, without the dock or the top panel (I tried starting the terminal with winkey + T, but to no awail). I have to put the computer to sleep by pressing the power button, and then wake it up in order to make everything work properly. Anyone know a solution to that? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, sometimes the laptop doesn't wake up from sleep (it just shows a black screen), so it has to be shut down and booted up again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated, thanks :) &lt;/p&gt;&#xA;" OwnerUserId="7752" LastEditorUserId="308" LastEditDate="2018-08-07T18:06:50.117" LastActivityDate="2018-08-07T18:06:50.117" Title="elementary OS Loki: I have to put the laptop to sleep right after booting to make it work" Tags="|release-loki|boot|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="9855" PostTypeId="1" CreationDate="2016-12-24T16:50:45.767" Score="1" ViewCount="468" Body="&lt;p&gt;I open the rufus and select all the correct options to format the device, but I click the # and the SHA256 does not match with hash in the installation page, what to do? Thanks in advance... and of course I cannot format it, I click start and stops in the step 4/5 and then it says ''ISO error : extraction failure''.&lt;/p&gt;&#xA;" OwnerUserId="7317" LastEditorUserId="160" LastEditDate="2016-12-24T17:13:03.200" LastActivityDate="2019-12-04T04:01:33.780" Title="Hash SHA256 does not match" Tags="|system-installation|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9856" PostTypeId="2" ParentId="9855" CreationDate="2016-12-24T17:35:53.853" Score="1" Body="&lt;p&gt;You need to try to re-download elementary OS image. I recommend using the magnet link for downloading via torrent client, this ensures that your install image will not corrupted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For downloading via magnet link press on magnet icon (circled in red on screenshot below).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L8BMH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L8BMH.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2016-12-24T17:35:53.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9857" PostTypeId="1" AcceptedAnswerId="9869" CreationDate="2016-12-24T22:04:14.390" Score="2" ViewCount="192" Body="&lt;p&gt;I was wondering if there's a way to get the current song in Elementary OS from the volume menu item.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eo4GP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eo4GP.jpg&quot; alt=&quot;Screenshot of volume&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, is there a command I can use to get it, or detect when the song changes? I'm essentially trying to write a program that automatically runs a script whenever the song changes (or just updates occasionally) with my current song.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the Nuvola Player&lt;/p&gt;&#xA;" OwnerUserId="5230" LastActivityDate="2016-12-25T23:10:25.703" Title="Get the current song information from volume control (command, etc)" Tags="|command-line|nuvola|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9858" PostTypeId="1" CreationDate="2016-12-25T02:03:07.153" Score="2" ViewCount="567" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/MnJWl.jpg&quot; alt=&quot;Screenshot if I plug my headphones in jack&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried various suggestions, nothing seems to work. &#xA;The left is the pulseaudiomanager and right is audio settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if I insert my headphone in another jack, I am still not getting sound. But now in audio settings instead of line out it changes to headphone.&lt;/p&gt;&#xA;" OwnerUserId="7903" LastEditorUserId="7904" LastEditDate="2016-12-25T13:37:41.790" LastActivityDate="2018-09-30T23:00:04.877" Title="No sound in headphones" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9859" PostTypeId="1" CreationDate="2016-12-25T02:57:35.250" Score="0" ViewCount="510" Body="&lt;p&gt;I have a Razer Blade Pro (2014 - has a &quot;fancy&quot; trackpad). It's &quot;registering&quot; as a mouse (the pointer speed isn't changing the trackpad settings, but rather from the mouse settings). I can't scroll (tried using edge, and double finger). Can anyone help me out? (P.S. I'm pretty new to Linux. Just installed the OS today.)&lt;/p&gt;&#xA;" OwnerUserId="7905" LastActivityDate="2016-12-27T18:03:18.820" Title="Trackpad problems (scrolling)" Tags="|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9861" PostTypeId="2" ParentId="9397" CreationDate="2016-12-25T06:49:25.533" Score="3" Body="&lt;p&gt;I'm not sure what solution you are actually looking for. If you wanted to restrict the icons to show only from current workspace, you can achieve that with plank very easily. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First bring the plank preference with the follow command. (If you have the preference icon in plank docked, that's fine)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Head over to the &lt;strong&gt;Behaviour&lt;/strong&gt; tab and toggle the option &lt;strong&gt;Restrict to Workspace&lt;/strong&gt; on it. Now, Plank will only show those icons that are opened on current workspace. Note that, pinned icons will be always shown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/60vqk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/60vqk.png&quot; alt=&quot;plank preference&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Response to OP's new comment:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From OP's comment, it appears that OP was referring to the behaviour of not opening a new instance of the application on a workspace where no instance is running on it. Currently, if there is an instance running on some other workspace, it switches to that workspace. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is by design and it's same in Ubuntu (also if I've not mistaken same in Windows 7). If you want to create a new instance, right click and select appropriate option.&lt;/p&gt;&#xA;" OwnerUserId="5054" LastEditorUserId="5054" LastEditDate="2016-12-26T07:48:30.127" LastActivityDate="2016-12-26T07:48:30.127" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9862" PostTypeId="1" AcceptedAnswerId="9922" CreationDate="2016-12-25T12:41:10.170" Score="1" ViewCount="1058" Body="&lt;p&gt;I wanted to mount my webdav share which is using certificate backed by CA &quot;Let's Encrypt&quot;. Unfortunately pantheon-files declare that CA is not trusted (not found). &#xA;This CA is perfectly workable and fine in firefox. Do they use different cert store, pantheon-files and firefox?&lt;/p&gt;&#xA;" OwnerUserId="7871" LastEditorUserId="45" LastEditDate="2016-12-28T19:12:35.403" LastActivityDate="2016-12-28T20:41:17.197" Title="How can I add / renew CA cert's which pantheon-files is using?" Tags="|release-loki|pantheon-files|security|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9863" PostTypeId="2" ParentId="9844" CreationDate="2016-12-25T14:03:00.600" Score="1" Body="&lt;p&gt;The issue was due to some settings that got messed up. I cleaned the &lt;code&gt;~/.config&lt;/code&gt; folder (after backing it up of course), and then rebooted. The problem went away. I am still not sure which exact setting was responsible for it. &lt;/p&gt;&#xA;" OwnerUserId="7815" LastActivityDate="2016-12-25T14:03:00.600" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9865" PostTypeId="1" CreationDate="2016-12-25T19:32:52.303" Score="1" ViewCount="108" Body="&lt;p&gt;So each time I launch Noise i have to go to the volume control to lower its sound volume cause it's at 100% on default and I prefer to have it lower. Is there a way to make Noise default to a particular volume value or do I have to do this every time?&lt;/p&gt;&#xA;" OwnerUserId="1228" LastActivityDate="2024-03-04T09:00:40.093" Title="How to make Music (Noise) remember the volume value" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9866" PostTypeId="1" AcceptedAnswerId="9867" CreationDate="2016-12-25T21:09:08.683" Score="0" ViewCount="568" Body="&lt;p&gt;I've bought a HP Pavillion X2 Detachable laptop and naturally I installed elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is no sound and no camera too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried reinstalling and changing pulseaudio and alsa, but with no effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've noticed that my internal soundcard is not detected at all.&#xA;Can anybody help me with that? Should I download a driver for it? Should I install some libraries?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for help :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-25T21:27:08.073" Title="Sound and Camera on HP Pavillion X2" Tags="|hardware|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9867" PostTypeId="2" ParentId="9866" CreationDate="2016-12-25T21:27:08.073" Score="1" Body="&lt;p&gt;Searching a little i found that this is a common bug and devs are working to fix : &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1561278&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1561278&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think you should try to &lt;a href=&quot;http://www.stchman.com/alsa_update.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;update alsa to latest version&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But i don't think will fix&lt;/p&gt;&#xA;" OwnerUserId="7909" LastActivityDate="2016-12-25T21:27:08.073" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9868" PostTypeId="1" AcceptedAnswerId="9873" CreationDate="2016-12-25T21:36:01.927" Score="1" ViewCount="334" Body="&lt;p&gt;when i have installed loki my installation finish with an error at installing grub(that i've fixed later on live session), but app install RELEASE is installed(i don't think this app should exists on fully-installed system, or not?).&#xA;I don't know if the error with grub have cause this but, after all, this is only a little issue, i'm writing this to inform developers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the attention&lt;/p&gt;&#xA;" OwnerUserId="7909" LastActivityDate="2016-12-26T17:56:11.363" Title="I've installed loki but i still have &quot;Install RELEASE&quot; app installed(like live session)" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9869" PostTypeId="2" ParentId="9857" CreationDate="2016-12-25T23:10:25.703" Score="2" Body="&lt;p&gt;The indicator is using the MPRIS dbus interface. So you could listen to dbus.&#xA;For example something like this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-monitor --session &quot;path=/org/mpris/MediaPlayer2&quot; --monitor | awk '&#xA;  /string  *&quot;xesam:artist/{&#xA;    while (1) {&#xA;      getline line&#xA;      if (line ~ /string &quot;/){&#xA;        sub(/.*string &quot;/, &quot;artist:&quot;, line)&#xA;        sub(/&quot;.*$/, &quot;&quot;, line)&#xA;        print line&#xA;        break&#xA;      }&#xA;    }&#xA;  }&#xA;  /string  *&quot;xesam:title/{&#xA;    while (1) {&#xA;      getline line&#xA;      if (line ~ /string &quot;/){&#xA;        sub(/.*string &quot;/, &quot;title:&quot;, line)&#xA;        sub(/&quot;.*$/, &quot;&quot;, line)&#xA;        print line&#xA;        break&#xA;      }&#xA;    }&#xA;  }&#xA;'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="37" LastActivityDate="2016-12-25T23:10:25.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9870" PostTypeId="2" ParentId="8200" CreationDate="2016-12-26T01:44:22.183" Score="1" Body="&lt;p&gt;I am using a Toshiba Chromebook 2 with Loki 0.4, I've installed Tweaks and used this to fix my top row key commands &quot;&lt;a href=&quot;http://www.fascinatingcaptain.com/blog/automate-chromebook-fixes-for-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.fascinatingcaptain.com/blog/automate-chromebook-fixes-for-linux/&lt;/a&gt;&quot; The brightness keys work however they don't affect anything other than the overlay that increases or decreases the brightness, and the keyboard backlight is broken on top of this. &lt;/p&gt;&#xA;" OwnerUserId="7911" LastActivityDate="2016-12-26T01:44:22.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9871" PostTypeId="1" CreationDate="2016-12-26T09:08:16.340" Score="1" ViewCount="1574" Body="&lt;p&gt;There are a lot of errors in the installation of the tool.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;It can't mount the dev/loop0&#xA;when made bootable with &quot;sardu&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;it auto-ejects the USB(unable to find and disconnect from OS)&#xA;&quot;while made bootable from YUMI, RUFUS&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It stuck at &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;A start job is running for ubuntu Live CD installer (31sec/ no limit)&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;:- I have checked the sha256 checksum. The Iso file is neither corrupted Nor modified.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running&#xA;Intel i3 2.67 GHZ&#xA;3GB RAM&#xA;USB 3.0 32 GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need more info&#xA;I like UI of this OS. Want to give it a try.&lt;/p&gt;&#xA;" OwnerUserId="7912" LastEditorUserId="4427" LastEditDate="2016-12-28T20:31:28.480" LastActivityDate="2017-05-18T16:26:35.057" Title="Installation errors" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9873" PostTypeId="2" ParentId="9868" CreationDate="2016-12-26T17:56:11.363" Score="1" Body="&lt;p&gt;It is very likely that a faulty installation would result in the installer not being removed at the end of the installation process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove it, open up Terminal and execute&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove ubiquity&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command will prompt you for an administrative password (&lt;code&gt;sudo&lt;/code&gt;) and instructs the system package manager (&lt;code&gt;apt&lt;/code&gt;), to remove the installer (&lt;code&gt;ubiquity&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-26T17:56:11.363" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9874" PostTypeId="1" AcceptedAnswerId="9877" CreationDate="2016-12-26T19:59:50.197" Score="0" ViewCount="2099" Body="&lt;p&gt;I just purchased a 2016 hp specter x360 (7th gen Intel) that comes equipped with an Intel 8265 dual band wifi (&lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the initial installation I noticed that the wireless wasn't coming up after reboot. So I took a look in /lib/firmware and confirmed that the 8265 firmware were not present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to track down a USB wireless dongle (Belkin/Realtek) to get myself online and performed the standard system updates. That brought me from kernel 4.4.38 to 4.4.57-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I look at /lib/firmware I do in fact see that 8265 firwmare is included. My heart skips a beat because now my wifi adapater should work, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, reboot and poof. Nada. It just doesn't come up. It is recognized by the system I believe (01:00.0 Network controller: Intel Corporation Device 24fd (rev 78)):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; lspci&#xA;00:00.0 Host bridge: Intel Corporation Device 5904 (rev 02)&#xA;00:02.0 VGA compatible controller: Intel Corporation Device 5916 (rev 02)&#xA;00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 02)&#xA;00:13.0 Non-VGA unclassified device: Intel Corporation Device 9d35 (rev 21)&#xA;00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)&#xA;00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)&#xA;00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller (rev 21)&#xA;00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI (rev 21)&#xA;00:1c.0 PCI bridge: Intel Corporation Device 9d11 (rev f1)&#xA;00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port (rev f1)&#xA;00:1d.0 PCI bridge: Intel Corporation Device 9d18 (rev f1)&#xA;00:1f.0 ISA bridge: Intel Corporation Device 9d58 (rev 21)&#xA;00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)&#xA;00:1f.3 Audio device: Intel Corporation Device 9d71 (rev 21)&#xA;00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)&#xA;01:00.0 Network controller: Intel Corporation Device 24fd (rev 78)&#xA;6d:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd Device a804&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;depmod doesn't show my the firmware is loaded at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can confirm that this wifi chip works perfectly fine in Ubuntu 16.10 and Ubuntu Mate 16.10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts on how I can get it enabled?&lt;/p&gt;&#xA;" OwnerUserId="7919" LastActivityDate="2017-08-02T13:42:18.113" Title="Intel 8265 doesn't work in Loki" Tags="|wifi|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9876" PostTypeId="1" CreationDate="2016-12-26T21:13:38.053" Score="2" ViewCount="433" Body="&lt;p&gt;I'm trying to create a &lt;code&gt;.contract&lt;/code&gt; file for &lt;code&gt;pantheon-files&lt;/code&gt; that will produce a shareable link for a file/folder within my Dropbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far, I have this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Share Dropbox link&#xA;Description=Obtain the url for sharing the file/folder with Dropbox&#xA;MimeType=application&#xA;Exec=dropbox sharelink %F | xclip -sel clip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;dropbox sharelink %F | xclip -sel clip&lt;/code&gt; works properly when used in terminal (replacing &lt;code&gt;%F&lt;/code&gt; with the name of a file or folder). It will generate the share link, and copy it to the clipboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing and/or doing wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, is it possible to add perhaps a system message showing &quot;The link was generated and copied to clipboard&quot; if the command is successful, and some kind of &quot;Error&quot; if it is not?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is not much info on &lt;code&gt;.contract&lt;/code&gt; files that I know of.&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2017-02-07T11:08:53.737" Title="Add 'Share Dropbox link' to Files right click menu" Tags="|release-loki|pantheon-files|menu|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9877" PostTypeId="2" ParentId="9874" CreationDate="2016-12-26T21:57:47.030" Score="4" Body="&lt;p&gt;See if &lt;code&gt;sudo apt-get install linux-generic-hwe-16.04-edge&lt;/code&gt; gets the 4.8 kernel installed and then do&#xA;&lt;pre&gt;&lt;code&gt;wget &lt;a href=&quot;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.161.1_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.161.1_all.deb&lt;/a&gt;&#xA;sudo dpkg -i linux-firmware_1.161.1_all.deb&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2016-12-26T21:57:47.030" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9878" PostTypeId="1" AcceptedAnswerId="9913" CreationDate="2016-12-26T22:45:09.503" Score="2" ViewCount="989" Body="&lt;h2&gt;When default light variant is used&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I know that in Tweaks one can set to 'prefer dark variant'.  But some applications (terminal, video player &lt;code&gt;audience&lt;/code&gt;, the photo viewer &lt;code&gt;pantheon-photos&lt;/code&gt;) are always dark even when the default light variant is used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2aB6N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2aB6N.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some native applications seem to use dark theming, while the majority do not.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;UPDATE&lt;/strong&gt; after &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9884/170&quot;&gt;jena's answer&lt;/a&gt; saying dark theming is intended by elementary OS  developers for native applications where light theme would not look right: there are also non-native applications that show dark window border, like mpv and Gnome MPV. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://i.stack.imgur.com/20J49.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/20J49.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;h2&gt;When dark variant is used&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Also, when 'prefer dark variant' is enabled, another kind of inconsistency appears, namely among the applications that were light-themed in the previous case: some applications use a dark theme in the sense that the upper window border is dark with light buttons while the rest is still light (most non-native applications, and Scratch text editor), while others are fully dark, window border, but also dark toolbar, and dark backgrounds (most native applications, with the exception of  Scratch text editor, but also many non-native ones: Pragha music player, &lt;code&gt;gnome-disk-utility&lt;/code&gt;, &lt;code&gt;pavucontrol&lt;/code&gt;, &lt;code&gt;dconf-editor&lt;/code&gt;, Sound Juicer etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EBtYZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EBtYZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why the difference?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it related to gtk versions?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-16T13:41:50.577" Title="Why are some apps dark and some apps light?" Tags="|release-loki|themes|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9879" PostTypeId="2" ParentId="8812" CreationDate="2016-12-27T02:24:57.030" Score="0" Body="&lt;p&gt;You should pay attention to this: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a know bug, isn't solved yet but its on work :D&lt;/p&gt;&#xA;" OwnerUserId="7924" LastActivityDate="2016-12-27T02:24:57.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9880" PostTypeId="1" AcceptedAnswerId="9885" CreationDate="2016-12-27T09:24:55.520" Score="9" ViewCount="1696" Body="&lt;p&gt;Do you plan to develop any blulight filter a.k.a. &quot;Night mode&quot;?&lt;/p&gt;&#xA;" OwnerUserId="7926" LastEditorUserId="15904" LastEditDate="2019-01-02T23:21:30.933" LastActivityDate="2019-01-02T23:21:30.933" Title="Do you plan to develop Night Mode?" Tags="|desktop|nightlight|" AnswerCount="4" CommentCount="4" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9881" PostTypeId="2" ParentId="9871" CreationDate="2016-12-27T09:31:04.830" Score="1" Body="&lt;p&gt;I think you shuld try to re-download iso, because he say is corrupted(sha256 checksum is used to verify that iso is not corrupted).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are on Windows i recommend you to use rufus, i never had any problems.&lt;/p&gt;&#xA;" OwnerUserId="7909" LastActivityDate="2016-12-27T09:31:04.830" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9883" PostTypeId="1" CreationDate="2016-12-27T09:52:27.337" Score="2" ViewCount="439" Body="&lt;p&gt;On my keyboard i have some userful key like one for go to homepage, one for launch music app and others, most of them works, other not.&#xA;I'm interested at &quot;calc&quot; and &quot;file&quot; key(i think the most userful), but they don't work.&lt;/p&gt;&#xA;" OwnerUserId="7909" LastActivityDate="2016-12-27T17:50:23.193" Title="some keyboard buttons don't work(calc and file shortcuts)" Tags="|release-loki|keyboard|" AnswerCount="1" CommentCount="0" ClosedDate="2016-12-28T18:14:06.013" ContentLicense="CC BY-SA 3.0" />
  <row Id="9884" PostTypeId="2" ParentId="9878" CreationDate="2016-12-27T11:22:28.180" Score="3" Body="&lt;p&gt;It was a design choice of the developers - light-coloured bar looks weird/distracting on generally dark apps like photo viewer or terminal.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2016-12-27T11:22:28.180" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9885" PostTypeId="2" ParentId="9880" CreationDate="2016-12-27T12:35:26.567" Score="5" Body="&lt;p&gt;You might want to look at the package &lt;code&gt;redshift&lt;/code&gt; (&lt;code&gt;universe&lt;/code&gt; packages) or fluxgui (in the PPA: &lt;a href=&quot;https://launchpad.net/~nathan-renniewaldock/+archive/ubuntu/flux&quot; rel=&quot;noreferrer&quot;&gt;https://launchpad.net/~nathan-renniewaldock/+archive/ubuntu/flux&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-27T12:35:26.567" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9886" PostTypeId="2" ParentId="7610" CreationDate="2016-12-27T15:16:38.513" Score="0" Body="&lt;p&gt;In the VMWare Fusion environment for Mac, pressing &quot;Command&quot; + &quot;Control&quot; keys simultaneously will release the mouse cursor to normal use outside the virtual machine window even if VMWare Tools is not installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &quot;Drag and Drop&quot; feature is a basic feature of VMWare Tools. The fact that this feature is not working may indicate that Tools failed to install correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy and uncompress &quot;Tools&quot; for Linux into Loki's Home/Downloads folder&lt;/p&gt;&#xA;&#xA;&lt;p&gt;open Terminal&#xA;use the &lt;code&gt;cd&lt;/code&gt; command to change directory to the one containing the uncompressed &lt;code&gt;vmware-install.pl&lt;/code&gt; file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use this command to install Tools manually:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo perl vmware-install.pl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(supply admin password required for &lt;code&gt;sudo&lt;/code&gt;), answer subsequent prompts with Enter key to accept defaults for &quot;Tools&quot; installation.&lt;/p&gt;&#xA;" OwnerUserId="5589" LastEditorUserId="578" LastEditDate="2016-12-27T16:35:49.033" LastActivityDate="2016-12-27T16:35:49.033" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9887" PostTypeId="2" ParentId="1090" CreationDate="2016-12-27T15:45:54.047" Score="2" Body="&lt;p&gt;Copy and paste the solution (at least for me):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa: linrunner/tlp&#xA;sudo apt-get update    &#xA;sudo apt-get install tlp tlp-rdw indicator-cpufreq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, edit grub. Execute the following command to open a text editor so you can edit the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Using your arrow keys, scroll down to line 11 where it should say this or something similar:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; GRUB_CMDLINE_LINUX_DEFAULT = &quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change the line to say this instead:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; GRUB_CMDLINE_LINUX_DEFAULT = &quot;quiet splash intel_pstate=disable&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the changes and then run the following command to update Grub:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot the system and if indicator-cpufreq does not show up in the panel automatically, press Alt + F2, type indicator-cpufreq and then press Enter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you need to edit the TLP configuration file before you use it. Execute the following command to edit the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch /etc/default/tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you'd rather use gedit instead of scratch, you can use either one of these commands instead: gksu gedit/etc/default/tlp or sudo gedit/etc/default/tlp.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Scroll down to where you see these two lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; # CPU_SCALING_GOVERNOR_ON_AC = powersave&#xA; # CPU_SCALING_GOVERNOR_ON_BAT = powersave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit those lines by removing the comment (pound symbol) from the beginning or each line and change &quot;powersave&quot; to &quot;ondemand&quot; like you see here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; CPU_SCALING_GOVERNOR_ON_AC = ondemand&#xA; CPU_SCALING_GOVERNOR_ON_BAT = ondemand&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Another line you probably want to change is this one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; DISK_APM_LEVEL_ON_BAT = &quot;128 128&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change 128 128 to 254 254:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISK_APM_LEVEL_ON_BAT = &quot;254 254&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Scroll down to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WIFI_PWR_ON_BAT = 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And change that to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WIFI_PWR_ON_BAT = 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the file before you exit and restart TLP for the changes to take effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you ever want to scale the frequency down, click on the indicator-cpufreq icon on the top panel and choose &quot;ondemand&quot;, &quot;powersave&quot;, or whatever to allow the CPU to wind down for better efficiency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each system is different and I have the basics in mine, some background processes can have a big impact on your batteries.&#xA;For now I still testing mine.&#xA;Greetings.&lt;/p&gt;&#xA;" OwnerUserId="7654" LastEditorUserId="578" LastEditDate="2016-12-27T16:34:54.203" LastActivityDate="2016-12-27T16:34:54.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9888" PostTypeId="2" ParentId="9883" CreationDate="2016-12-27T17:50:23.193" Score="-1" Body="&lt;p&gt;Probably you need to add shortcuts for them.&#xA;In &lt;em&gt;System Settings&lt;/em&gt; &gt;&lt;em&gt;Keyboard&lt;/em&gt; you'll find shortcuts for variety of functions and you can change keys to use these functions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to add a custom shortcut, go to the last tab where you can create your own shortcut - you define terminal command that is performed on event of clicking for example your calc key (maybe open calculator or libre office calc)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-27T17:50:23.193" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9891" PostTypeId="2" ParentId="9859" CreationDate="2016-12-27T18:03:18.820" Score="1" Body="&lt;p&gt;As I remember, you can set it in &lt;em&gt;System Settings&gt;Mouse and Touchpad&lt;/em&gt;.&#xA;By default elementary has no scrolling and tap to click on touchpad, so you need to enable that there :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-27T18:03:18.820" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9892" PostTypeId="2" ParentId="9854" CreationDate="2016-12-27T18:09:00.413" Score="1" Body="&lt;p&gt;I use the same laptop and sometimes I have that problem too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case of only background image displayed I click &lt;strong&gt;Ctrl+Alt+F1&lt;/strong&gt; and then &lt;strong&gt;Ctrl+Alt+F7&lt;/strong&gt;. So that I switch to cli and then to gui.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case of black screen after wake up. It brings the system after a while or you just need to reboot manually. :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But for a month or so I haven't meet this problem, I thought that they fixed that in some update. &lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-27T18:09:00.413" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9893" PostTypeId="1" CreationDate="2016-12-27T18:59:05.690" Score="2" ViewCount="503" Body="&lt;p&gt;In Files on the sidebar, my Home partition is not showing.  I see &quot;File System&quot; which is on its own partition, under the &quot;Devices&quot; header but no Home partition represented.  I also have an NAS hard drive which is showing under the &quot;Network&quot; header.  I would like to have it so I can get a quick read on its free space situation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary Loki     &lt;/p&gt;&#xA;" OwnerUserId="7787" LastActivityDate="2017-03-31T20:00:02.153" Title="Home partition not showing in Files sidebar" Tags="|files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9894" PostTypeId="2" ParentId="9893" CreationDate="2016-12-27T19:50:48.253" Score="-1" Body="&lt;p&gt;Your home is in File System under /home/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should have your home folders in Personal tab. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-27T19:50:48.253" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9895" PostTypeId="2" ParentId="9843" CreationDate="2016-12-27T19:54:34.083" Score="2" Body="&lt;p&gt;Use &lt;code&gt;killall wingpanel&lt;/code&gt; in terminal - it should reset the wingpanel and bring it after few seconds. ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It happens from time to time.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-27T19:54:34.083" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9896" PostTypeId="1" AcceptedAnswerId="9981" CreationDate="2016-12-27T23:32:18.803" Score="1" ViewCount="316" Body="&lt;p&gt;I want to have a dark theme like the one enabled with &lt;code&gt;gtk-application-prefer-dark-theme=1&lt;/code&gt; in &lt;code&gt;~/.config/gtk-3.0/settings.ini&lt;/code&gt; but I want Files to still have a light background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many applications show light backgrounds with the dark variant enabled, including the native text editor Scratch, and most non-native applications only have a dark window bar.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2016-12-27T23:43:30.237" LastActivityDate="2017-02-01T18:43:31.387" Title="Light background for Files with dark theme" Tags="|release-loki|pantheon-files|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9897" PostTypeId="1" CreationDate="2016-12-27T23:56:25.283" Score="5" ViewCount="12716" Body="&lt;p&gt;I'm trying to set up three finger swipes to cycle between workspaces with no success. I installed touchegg and got some config files but couldn't get it working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I run touchegg I get this message and then nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Try to make a multitouch gesture. If everything goes well the information about the gesture must appear &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Flick &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Drag &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Pinch &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Rotate &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Tap &#xA;[+] Avaliable gesture: &#xA;     Name -&amp;gt;  Touch &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've changed the config file to set up gestures I know work in my hardware (such as two finger scroll) but again, nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be much appreciated!&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2017-08-07T09:52:24.757" Title="How to enable multi touch gestures" Tags="|touchpad|gesture|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9898" PostTypeId="2" ParentId="9878" CreationDate="2016-12-28T06:04:25.657" Score="0" Body="&lt;p&gt;Scratch uses it's own theming, so it doesn't depends on gtk theme. You could change it in scratch settings&lt;/p&gt;&#xA;" OwnerUserId="7933" LastActivityDate="2016-12-28T06:04:25.657" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9899" PostTypeId="2" ParentId="9827" CreationDate="2016-12-28T08:33:14.510" Score="2" Body="&lt;p&gt;You should look for the &lt;code&gt;.desktop&lt;/code&gt; file of the Microsoft Word (in &lt;code&gt;~/.local/share/applications/wine/Programs&lt;/code&gt;) and append &lt;code&gt;%F&lt;/code&gt; to the line that starts with &lt;code&gt;Exec=&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-28T08:33:14.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9903" PostTypeId="1" CreationDate="2016-12-28T10:27:22.003" Score="3" ViewCount="122" Body="&lt;p&gt;The Applications launcher can show and should start the different specific settings under System Settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case they &lt;strong&gt;do not&lt;/strong&gt; start if clicked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DDFfM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DDFfM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'Systems Settings' can be started in this way, but not its sub-settings.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update after the subsettings have been completely absent in Slingshot but then appeared again after update, and a &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10620/170&quot;&gt;post is saying this was fixed&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are still many sub-settings that are not accessible from slingshot.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-13T10:01:37.310" Title="Cannot start the specific sub-System Settings items from Applications launcher (Slingshot)" Tags="|slingshot|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9904" PostTypeId="2" ParentId="9903" CreationDate="2016-12-28T10:56:13.600" Score="2" Body="&lt;p&gt;This is due to a changement in Switchboard (the System Settings) application. We might report this as a bug, however, I guess now the &lt;code&gt;slingshot-launcher&lt;/code&gt; should open &lt;code&gt;settings:///&lt;/code&gt; URIs instead of calling &lt;code&gt;switchboard -o&lt;/code&gt; (as it does for now).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-28T10:56:13.600" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9905" PostTypeId="1" AcceptedAnswerId="10011" CreationDate="2016-12-28T10:59:33.473" Score="0" ViewCount="926" Body="&lt;p&gt;I have a problem with &lt;em&gt;Airplane Mode&lt;/em&gt; (AM) in elementary OS Loki (latest release, updated as of today). I am not sure whether this is a Gnome issue (see for instance this &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=211250&quot; rel=&quot;nofollow noreferrer&quot;&gt;thread&lt;/a&gt;), a Pantheon issue or something completely different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Here is my problem&lt;/strong&gt;: I cannot disable AM; if the radiobutton is flipped, AM remains in the same state. I can only choose from VPN and Proxy, but no network interfaces are present. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Invoking the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill list all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;returns that no devices (&lt;code&gt;hci0: bluetooth&lt;/code&gt; and &lt;code&gt;phy0: Wireless LAN&lt;/code&gt;) are soft or hard blocked. I tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill unblock 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which correspondes to &lt;code&gt;phy0&lt;/code&gt;. Also tried blocking and unblocking it. There is a hardware switch on the laptop. I have tried to switch this back and forth, and it does indeed make &lt;code&gt;hci0&lt;/code&gt; and &lt;code&gt;phy0&lt;/code&gt; to appear as soft blocked. This does not yield a solution, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let us look in the Network manager's internal state:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /var/lib/NetworkManager/NetworkManager.state&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[main]&#xA;NetworkingEnabled=true&#xA;WirelessEnabled=true&#xA;WWANEnabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OK, so that is not it... Moreover, &lt;code&gt;ifconfig&lt;/code&gt; states that only the loopback interface is enabled. Running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ifconfig [dev] up&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;makes the device show up when running &lt;code&gt;ifconfig&lt;/code&gt;, but it still does not give me a network connection. Subsequently running &lt;code&gt;down&lt;/code&gt; and &lt;code&gt;up&lt;/code&gt; does not remedy either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried starting elementary OS in recovery mode. First, I enable network and then, resume the process arriving at the desktop. Now, the network works perfectly (however, the network settings still reports that Airplane Mode is ON), so it is clearly not a hardware issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, I have also tried resetting to defaults (button in the About window). This had virtually no effect at all on the network manager. I &lt;em&gt;really&lt;/em&gt; want to avoid reinstalling elementary OS for this reason. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hints?&lt;/p&gt;&#xA;" OwnerUserId="342" LastEditorUserId="45" LastEditDate="2016-12-28T20:20:59.213" LastActivityDate="2017-02-04T13:49:56.497" Title="How can I disable Airplane Mode?" Tags="|release-loki|networking|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9906" PostTypeId="2" ParentId="9759" CreationDate="2016-12-28T13:11:44.873" Score="0" Body="&lt;p&gt;You can track / report epiphany bugs on the GNOME bug tracker site:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugzilla.gnome.org/buglist.cgi?bug_status=__open__&amp;amp;content=login&amp;amp;product=epiphany&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/buglist.cgi?bug_status=&lt;strong&gt;open&lt;/strong&gt;&amp;amp;content=login&amp;amp;product=epiphany&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-28T13:11:44.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9907" PostTypeId="1" AcceptedAnswerId="9961" CreationDate="2016-12-28T13:26:59.797" Score="2" ViewCount="4586" Body="&lt;p&gt;I'm using ruby version manager &lt;a href=&quot;https://rvm.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;rvm&lt;/a&gt; which requires its commands to be run in a login shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gnome-terminal provides an option for commands to run as a login shell as described &lt;a href=&quot;https://rvm.io/integration/gnome-terminal&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;however, there's not any similar option in patheon-terminal.&#xA;is there a work around for this issue?&lt;/p&gt;&#xA;" OwnerUserId="2608" LastActivityDate="2019-01-20T15:20:10.227" Title="no way to run commands as a login shell in terminal" Tags="|pantheon-terminal|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9908" PostTypeId="1" CreationDate="2016-12-28T14:18:23.643" Score="1" ViewCount="117" Body="&lt;p&gt;Fresh install on the XPS, ElementaryOS only, no Windows. If I try and play music I just get white noise. If I alter any of the volume knobs a blip of white noise plays after (I assume this is down to  sound that would play after adjusting). Essentially any noise is replaced by white noise!&lt;/p&gt;&#xA;" OwnerUserId="7937" LastActivityDate="2016-12-28T15:42:51.873" Title="XPS 13 9350 - Audio produces nothing but hissing/white noise" Tags="|audio|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9909" PostTypeId="2" ParentId="9731" CreationDate="2016-12-28T14:35:01.037" Score="1" Body="&lt;p&gt;I had a similar issue with the PIA app, so I uninstalled it and configured the VPN through eOS's network configuration. No problems so far.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2016-12-28T14:35:01.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9910" PostTypeId="2" ParentId="9908" CreationDate="2016-12-28T15:42:51.873" Score="1" Body="&lt;p&gt;For anyone else having this exact same issue, I just performed a BIOS update on my XPS 13 which completely fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="7937" LastActivityDate="2016-12-28T15:42:51.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9912" PostTypeId="1" CreationDate="2016-12-28T16:13:41.733" Score="2" ViewCount="363" Body="&lt;p&gt;I'm having this small issue with Loki on an Asus E402S laptop:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the internal soundcard works fine and also do the headphones if I manually choose them as an output with &lt;code&gt;pavucontrol&lt;/code&gt;, but when I plug or unplug the headphones jack it doesn't automatically switch between headphones and laptop speaker.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice for this? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7938" LastEditorUserId="7938" LastEditDate="2016-12-29T08:56:59.550" LastActivityDate="2020-04-15T01:02:00.270" Title="Internal soundcard doesn't automatically switch to headphones when I plug them in" Tags="|release-loki|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9913" PostTypeId="2" ParentId="9878" CreationDate="2016-12-28T18:03:04.703" Score="2" Body="&lt;p&gt;Some apps, mostly media apps, use the dark stylesheet to manipulate contrast around the type of content they display. For example, a photo viewer might use the dark stylesheet to make a photo's colors appear more bright and vibrant. For Terminal, this makes colors in syntax highlighting pop against the background. In Videos this makes sure the UI doesn't appear blindingly bright against a likely dark room or a dark scene in a video.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other apps, mostly apps that deal with lots of text, may strongly prefer the light stylesheet to make sure that lengths of text don't tire the eyes. They might use the lightness of the background to convey that areas of the UI are editable, emulating the whiteness of paper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In either way, we don't expose the ability for users to overwrite this because we feel that this is a decisions for developers to make about their own apps. Some developers ship custom stylesheets that break when forced to be paired with the wrong system stylesheet. We want to make sure that developers can be confident that their apps will appear on users' systems how the developer designed and tested them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dark stylesheet is part of Gtk3 API. Gtk2 apps don't respect this API.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:03:04.703" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9914" PostTypeId="2" ParentId="9903" CreationDate="2016-12-28T18:12:42.130" Score="2" Body="&lt;p&gt;A fix &lt;a href=&quot;https://code.launchpad.net/~elementary-pantheon/slingshot/trunk&quot; rel=&quot;nofollow noreferrer&quot;&gt;has been committed&lt;/a&gt; to address this issue. An update was issued as of January 3rd, 2017&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2017-01-03T19:52:59.567" LastActivityDate="2017-01-03T19:52:59.567" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9915" PostTypeId="2" ParentId="9801" CreationDate="2016-12-28T18:22:59.697" Score="1" Body="&lt;p&gt;This is not currently possible. There is an &lt;a href=&quot;https://bugs.launchpad.net/plank/+bug/1095843&quot; rel=&quot;nofollow noreferrer&quot;&gt;open bug report on Launchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:22:59.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9916" PostTypeId="2" ParentId="9800" CreationDate="2016-12-28T18:24:22.717" Score="1" Body="&lt;p&gt;It is not currently possible to have different scaling factors for each display. It will be addressed in a future version of elementary OS after the move from X11 to Wayland as the display server&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:24:22.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9917" PostTypeId="2" ParentId="9753" CreationDate="2016-12-28T18:25:46.520" Score="2" Body="&lt;p&gt;It is not possible to set a video as the background in the greeter&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:25:46.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9919" PostTypeId="2" ParentId="6979" CreationDate="2016-12-28T18:47:43.980" Score="1" Body="&lt;p&gt;As of this time elementary doesn't conduct formal user tests with non-customers.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:47:43.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9920" PostTypeId="2" ParentId="5317" CreationDate="2016-12-28T18:54:23.403" Score="2" Body="&lt;p&gt;It is not possible to remove the titlebar when Terminal is windowed.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-28T18:54:23.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9921" PostTypeId="2" ParentId="9907" CreationDate="2016-12-28T20:08:51.450" Score="2" Body="&lt;p&gt;You can set the key &lt;code&gt;shell&lt;/code&gt; under &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt; in dconf-editor or via the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings shell 'bash --login'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-28T20:08:51.450" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9922" PostTypeId="2" ParentId="9862" CreationDate="2016-12-28T20:41:17.197" Score="4" Body="&lt;p&gt;Get the CA which is missing. In my case:go to lets encrypt web site (or any other missing CA cert site). Copy the CA in PEM format (the format that has ----BEGIN CERTIFICATE---- in it) into &lt;code&gt;/usr/local/share/ca-certificates&lt;/code&gt; and &lt;strong&gt;name it with a .crt file extension&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run &lt;code&gt;sudo update-ca-certificates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can verify if this worked by looking for the certificate that you just added in &lt;code&gt;/etc/ssl/certs/ca-certificates.crt/&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="7871" LastActivityDate="2016-12-28T20:41:17.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9924" PostTypeId="1" CreationDate="2016-12-29T12:45:25.037" Score="0" ViewCount="270" Body="&lt;p&gt;I try to use the &quot;OpenPGP Applet&quot; from the Elementary OS Software Center. But the Applet doesnt start when i try to start it via Doubleclick on the Icon. The little OpenPGP Applet Icon comes to Plank, but nothing happened on Wingpanel.&#xA;Autostart while Systemstart doesnt help. Can anybody help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ElementaryOS &quot;loki&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greets&lt;/p&gt;&#xA;" OwnerUserId="7946" LastEditorUserId="578" LastEditDate="2016-12-29T14:54:46.530" LastActivityDate="2016-12-29T16:11:11.913" Title="How to make OpenPGP Applet appear on Wingpanel?" Tags="|release-loki|wingpanel|openpgp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9925" PostTypeId="1" AcceptedAnswerId="9935" CreationDate="2016-12-29T14:47:57.773" Score="1" ViewCount="1171" Body="&lt;p&gt;In OSX, you've the option to set a physical click on the lower right corner of the touchpad to be your Secondary (right) click.  I can't seem to figure out to duplicate this functionality in Elementary OS Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's some details:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Macbook 5,1 (Late 2008)&lt;/li&gt;&#xA;&lt;li&gt;Elementary OS 0.4 Loki&lt;/li&gt;&#xA;&lt;li&gt;No physical buttons, just a single pad that can be clicked&lt;/li&gt;&#xA;&lt;li&gt;The touchpad is setup for right handed use&lt;/li&gt;&#xA;&lt;li&gt;Primary (left) click works fine&lt;/li&gt;&#xA;&lt;li&gt;I can tap with two fingers to active the Secondary (right) click menu&lt;/li&gt;&#xA;&lt;li&gt;The issue is the combination of physical click to the lower right of the touchpad registers the same as Primary (left) click.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Running &lt;code&gt;xinput --list&lt;/code&gt; my touchpad shows up as being a &lt;code&gt;bcm5974&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run &lt;code&gt;xinput --list-props bcm5974&lt;/code&gt; I get the following output of options:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device 'bcm5974':&#xA;    Device Enabled (142):   1&#xA;    Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&#xA;    libinput Tapping Enabled (276): 1&#xA;    libinput Tapping Enabled Default (277): 0&#xA;    libinput Tapping Drag Enabled (278):    1&#xA;    libinput Tapping Drag Enabled Default (279):    1&#xA;    libinput Tapping Drag Lock Enabled (280):   0&#xA;    libinput Tapping Drag Lock Enabled Default (281):   0&#xA;    libinput Accel Speed (282): 0.875000&#xA;    libinput Accel Speed Default (283): 0.000000&#xA;    libinput Natural Scrolling Enabled (284):   0&#xA;    libinput Natural Scrolling Enabled Default (285):   0&#xA;    libinput Send Events Modes Available (260): 1, 0&#xA;    libinput Send Events Mode Enabled (261):    0, 0&#xA;    libinput Send Events Mode Enabled Default (262):    0, 0&#xA;    libinput Left Handed Enabled (286): 0&#xA;    libinput Left Handed Enabled Default (287): 0&#xA;    libinput Scroll Methods Available (288):    1, 1, 0&#xA;    libinput Scroll Method Enabled (289):   1, 0, 0&#xA;    libinput Scroll Method Enabled Default (290):   1, 0, 0&#xA;    libinput Click Methods Available (291): 1, 1&#xA;    libinput Click Method Enabled (292):    0, 1&#xA;    libinput Click Method Enabled Default (293):    0, 1&#xA;    libinput Disable While Typing Enabled (294):    1&#xA;    libinput Disable While Typing Enabled Default (295):    1&#xA;    Device Node (263):  &quot;/dev/input/event8&quot;&#xA;    Device Product ID (264):    1452, 566&#xA;    libinput Drag Lock Buttons (296):   &amp;lt;no items&amp;gt;&#xA;    libinput Horizonal Scroll Enabled (265):    1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Has anyone figure out a way to get this to work?&lt;/p&gt;&#xA;" OwnerUserId="7948" LastEditorUserId="7948" LastEditDate="2016-12-29T16:13:06.943" LastActivityDate="2016-12-30T17:23:02.060" Title="How to enable lower right corner touchpad as Secondary click on 2008 Macbook 5,1" Tags="|release-loki|touchpad|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9926" PostTypeId="2" ParentId="9280" CreationDate="2016-12-29T14:59:19.507" Score="0" Body="&lt;p&gt;Try starting it with &lt;code&gt;sudo /opt/lampp/lampp start&lt;/code&gt; in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should start servers and give you an information that it works.&#xA;If it'll start properly, check if you can use it properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I understand you're using GUI for xampp - I had a problem with it too and in my case I just purged xampp and installed it with another .run file (Probably the previous version). :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.&#xA;To shutdown all the servers use &lt;code&gt;sudo /opt/lampp/lampp stop&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-29T14:59:19.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9927" PostTypeId="2" ParentId="7006" CreationDate="2016-12-29T15:05:39.087" Score="1" Body="&lt;p&gt;Have you tried this application? :)&#xA;&lt;a href=&quot;http://www.webupd8.org/2012/10/ubuntu-multi-monitor-tweaks-full-screen.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Multi Monitor Tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to be a tutorial for exactly the thing you want. ;)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastEditorUserId="7532" LastEditDate="2016-12-29T16:01:33.413" LastActivityDate="2016-12-29T16:01:33.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9928" PostTypeId="2" ParentId="9925" CreationDate="2016-12-29T15:25:44.070" Score="1" Body="&lt;p&gt;The short answer is to change the property &lt;code&gt;Click Method Enabled (292)&lt;/code&gt; from   &lt;code&gt;0, 1&lt;/code&gt; to &lt;code&gt;1, 0&lt;/code&gt;.  No idea what the heck this means, but it works.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;UPDATE: While below works to set Click Method Enabled, Daniel's answer shows how the same is accomplished via the eOS GUI without much effort.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I found the answer buried in a random redhat post: &lt;a href=&quot;https://bugzilla.redhat.com/show_bug.cgi?id=1214477&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.redhat.com/show_bug.cgi?id=1214477&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For my device the command was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; xinput --set-prop bcm5974 292  1 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After changing this setting verified:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Secondary (right) click works when clicking lower right corner of touchpad&lt;/li&gt;&#xA;&lt;li&gt;Two finger tap still works for Secondary click&lt;/li&gt;&#xA;&lt;li&gt;Primary (left) click still works (thankfully!)&lt;/li&gt;&#xA;&lt;li&gt;Single finger tap to select (Primary click) still works as well&lt;/li&gt;&#xA;&lt;li&gt;Changing other properties in the Elementary OS &lt;em&gt;System Settings&lt;/em&gt; does not revert the property setting&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;However... xinput property setting changes don't persist across login/logout (thus lost every restart/shutdown). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried putting the &lt;code&gt;xinput&lt;/code&gt; commands in &lt;code&gt;.xsession&lt;/code&gt;, &lt;code&gt;.xsessionrc&lt;/code&gt;, and &lt;code&gt;.bash_profile&lt;/code&gt;--none worked.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What finally worked was to create a file &lt;code&gt;/usr/share/applications/configure_touchpad.desktop&lt;/code&gt; with the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Custom Touchpad Config&#xA;Comment=Set your mouse and touchpad preferences&#xA;Exec= xinput --set-prop bcm5974 278 0 &amp;amp;&amp;amp;  xinput --set-prop bcm5974 292 1 0&#xA;Icon=/usr/share/icons/HighContrast/256x256/devices/input-touchpad.png&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Settings;HardwareSettings;X-GNOME-Settings-Panel;System;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I then logged out and logged back in. (Seems to be needed to make app show up in the &lt;em&gt;System Settings&lt;/em&gt; startup app list). Went into &lt;em&gt;System Settings-&gt;Applications-&gt;Startup&lt;/em&gt;, search for the name &quot;Custom&quot; and added it to my startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this Helps others!&lt;/p&gt;&#xA;" OwnerUserId="7948" LastEditorUserId="7948" LastEditDate="2016-12-30T17:23:02.060" LastActivityDate="2016-12-30T17:23:02.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9929" PostTypeId="2" ParentId="7333" CreationDate="2016-12-29T15:52:07.517" Score="0" Body="&lt;p&gt;You've got the PPA wrong. Try ppa:philip.scott/elementary-tweaks&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2016-12-29T15:52:07.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9930" PostTypeId="2" ParentId="9924" CreationDate="2016-12-29T16:11:11.913" Score="1" Body="&lt;p&gt;Sadly, it is not something that is going to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You cannot use this applet with Wingpanel, as it is not compatible with elementary OS, it has been developed for Gnome.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-29T16:11:11.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9931" PostTypeId="2" ParentId="9893" CreationDate="2016-12-29T16:29:41.580" Score="1" Body="&lt;p&gt;&lt;strong&gt;TL; DR: add &lt;code&gt;x-gvfs-show&lt;/code&gt; to mount options&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually none of the partitions mounted permanently (except the / partition) shows up in this Devices list, only external USB or network drives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At least, this is the default behavior you can change this by adding &lt;code&gt;x-gvfs-show&lt;/code&gt; to the mount options in &lt;code&gt;/etc/fstab&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=f5aa03f7-28a4-435e-84d6-d84529f13532 /home       ext4    defaults,x-gvfs-show  0   2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-03-31T20:00:02.153" LastActivityDate="2017-03-31T20:00:02.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9932" PostTypeId="1" CreationDate="2016-12-29T17:01:24.297" Score="0" ViewCount="77" Body="&lt;p&gt;I can set up a screen resolution on both the laptop screen and the external monitor using &lt;code&gt;xrandr&lt;/code&gt; and everything works fine, but my displays go back to normal when I restart lightdm. How can I make the changes permanent? I tried going through the &lt;code&gt;monitors.xml&lt;/code&gt; file, but it isn't being updated. The Displays item in system settings &lt;a href=&quot;http://tinyimg.io/i/HPQ24Uc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;isn't of much use...&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7950" LastEditorUserId="7950" LastEditDate="2016-12-29T18:07:40.810" LastActivityDate="2017-01-28T19:15:05.827" Title="External monitor resolution on Macbook Pro is not permanent, reverts to original when lightdm is restarted" Tags="|display|greeter|macbook|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9934" PostTypeId="2" ParentId="9932" CreationDate="2016-12-29T18:14:38.063" Score="1" Body="&lt;p&gt;I had pretty much the same problem with display on an external monitor - display was fitted badly; I hardly could see wingpanel or plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I solved it with changing config file in &lt;code&gt;/boot/&lt;/code&gt; directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this file you need to find &lt;code&gt;disable_overscan&lt;/code&gt; and change it's value to 1.&#xA;Then a bit further down you'll find &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;overscan_bottom=48&#xA;overscan_left=48&#xA;overscan_right=48&#xA;overscan_top=48&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can change these values to fit your display into monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then save it  and restart computer. It should be fine after few times. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-29T18:14:38.063" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9935" PostTypeId="2" ParentId="9925" CreationDate="2016-12-29T20:36:48.270" Score="2" Body="&lt;p&gt;elementary OS 0.4 Loki uses LibInput and not xinput.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change your click method in System Settings &gt; Mouse &amp;amp; Touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use touchpad areas for right clicking instead of Multitouch, change the click method to &quot;Touchpad areas&quot; under &quot;Physical Clicking&quot;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-29T20:36:48.270" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="9936" PostTypeId="1" CreationDate="2016-12-30T03:56:39.480" Score="1" ViewCount="3646" Body="&lt;p&gt;Trying to diagnose my sudden lack of wifi, but I have no idea what this icon means.&lt;/p&gt;&#xA;" OwnerUserId="7863" LastActivityDate="2017-03-01T14:32:40.507" Title="What do the three dots on the network icon mean?" Tags="|wingpanel|wifi|networking|icons|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9937" PostTypeId="2" ParentId="9725" CreationDate="2016-12-30T06:10:19.807" Score="1" Body="&lt;p&gt;You can set your computer to shut down if you close the lid (and this separately for &lt;em&gt;Plugged in&lt;/em&gt; and &lt;em&gt;On Battery&lt;/em&gt; modes). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I don't really understand how can you not have to restart the computer the next time you want to use it: if you power it off, you will have to power it on eventually if you want to use it again…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unlock &lt;em&gt;Settings / Power&lt;/em&gt; and set &lt;em&gt;Shutdown&lt;/em&gt; as lid close action. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0HRyq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0HRyq.png&quot; alt=&quot;setting shutdown on lid close&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T06:10:19.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9938" PostTypeId="2" ParentId="3047" CreationDate="2016-12-30T06:52:17.173" Score="0" Body="&lt;p&gt;It is normal that USB drives does not get auto-mounted in elementary OS. Moreover, if &lt;code&gt;fdisk&lt;/code&gt; lists them, it means that they get recognized.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T06:52:17.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9940" PostTypeId="2" ParentId="9408" CreationDate="2016-12-30T08:38:56.743" Score="1" Body="&lt;p&gt;There is a repository key missing. To fix this, you can add the key in a terminal window with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget --quiet http://download.opensuse.org/repositories/home:Horst3180/xUbuntu_16.04/Release.key -O - | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T08:38:56.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9941" PostTypeId="2" ParentId="3822" CreationDate="2016-12-30T09:08:12.823" Score="0" Body="&lt;p&gt;What you ask is not possible if not by hacking the source code of Slingshot (the application launcher).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After Slingshot has been opened with the Win key, it gets the focus. So you would have to be able to &quot;tell it&quot; that it should close if you press the Win key again. &lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T09:08:12.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9942" PostTypeId="1" AcceptedAnswerId="9966" CreationDate="2016-12-30T09:20:48.023" Score="1" ViewCount="890" Body="&lt;p&gt;So I typed in my terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge xterm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and the system then proceeded to uninstall a lot of packages. After the uninstallation was complete I typed xterm and it opened the terminal normally. What was deleted then ? I tried upgrading the system, but nothing was downloaded. Is Xterm essential to the system ? Can I remove it ? How ?&lt;/p&gt;&#xA;" OwnerUserId="7537" LastEditorUserId="45" LastEditDate="2016-12-31T19:11:25.937" LastActivityDate="2016-12-31T19:11:25.937" Title="Can I remove xterm?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9943" PostTypeId="2" ParentId="138" CreationDate="2016-12-30T09:25:19.140" Score="3" Body="&lt;p&gt;As of 0.4 loki you can install gnome-builder 3.18 from the software repositories.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T09:25:19.140" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9944" PostTypeId="1" AcceptedAnswerId="9947" CreationDate="2016-12-30T10:35:22.527" Score="0" ViewCount="143" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2Bw4J.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Bw4J.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on the link just echoed, it is opened in firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Earlier such links from terminal were opened in chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But then I made firefox as my default browser. Then on wards these links are opened in firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now I want to open links in chrome. I had made chrome as default browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still these links are opened in firefox. How to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using  &lt;strong&gt;elementary 14.04&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to recreate this in ubuntu. &#xA;But there it is working fine.&#xA;When I changed to chrome as default browser, links from terminal are opened in chrome. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I have tried&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I uninstalled firefox.&#xA;Now the links are opening in chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I again installed firefox.&#xA;Now the links are again opening in firefox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Desktop Environment is panthaeon&#xA;Terminal is panthaeon-terminal&lt;/p&gt;&#xA;" OwnerUserId="5729" LastEditorUserId="5729" LastEditDate="2016-12-30T15:38:59.510" LastActivityDate="2016-12-30T15:38:59.510" Title="Open url from terminal in chrome" Tags="|pantheon-terminal|google-chrome|command-line|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9945" PostTypeId="1" AcceptedAnswerId="9965" CreationDate="2016-12-30T10:47:54.910" Score="0" ViewCount="490" Body="&lt;p&gt;I've been looking everywhere but I can't find a solution to my problem:&#xA;Somehow I did something that dissabled the indicators on the wingpanel of my ElementaryOS 0.4 Loki (Ubuntu 16.04 LTS).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've removed and installed pantheon, wingpanel, the indicator and tried so many solutions that I found arround the internet but nothing fixed my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to install indicator-cpufreq, and even it is installed and running (I've looking for it on system monitor) It isn't on the top bar.&#xA;The default icons and indicators are showed and working perfect, but I can't add more than it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Yeray&lt;/p&gt;&#xA;" OwnerUserId="7956" LastActivityDate="2016-12-31T18:37:01.467" Title="Indicators running but not showing on bar" Tags="|release-loki|wingpanel|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9946" PostTypeId="1" AcceptedAnswerId="9956" CreationDate="2016-12-30T14:48:15.380" Score="0" ViewCount="254" Body="&lt;p&gt;I have installed the XGTK theme and the wingpanel has become white in fullscreen mode with white text. And the colors of pop-up menus like &quot;turn off&quot; or &quot;wi-fi&quot; are wrong and unreadable. I've managed to change the color of the wingpanel itself, but how can I change the colors in menu? I am using Freya &lt;a href=&quot;https://i.stack.imgur.com/hqpq0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hqpq0.jpg&quot; alt=&quot;Wi-Fi menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7961" LastEditorUserId="45" LastEditDate="2016-12-30T18:37:16.373" LastActivityDate="2016-12-30T18:37:16.373" Title="How can I make wingpanel look right with a 3rd-party stylesheet?" Tags="|wingpanel|menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9947" PostTypeId="2" ParentId="9944" CreationDate="2016-12-30T15:36:11.760" Score="1" Body="&lt;p&gt;The links from terminal are opened in your default browser. If you want to open it in chrome, make chrome your default browser...&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2016-12-30T15:36:11.760" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9948" PostTypeId="1" AcceptedAnswerId="9954" CreationDate="2016-12-30T15:48:40.280" Score="3" ViewCount="507" Body="&lt;p&gt;I have the problem: when I use &lt;code&gt;Super + L&lt;/code&gt; for screen lock all background activities (f.e. music) freeze. I've tried to change &lt;code&gt;ligthDM&lt;/code&gt; for &lt;code&gt;gdm, sddm, cdm, sdm, lxdm&lt;/code&gt; but all of them showed black screen after &lt;code&gt;Super + L&lt;/code&gt;. So, how to set another DM working properly, or how to fix &quot;freezing problem?&quot; &lt;/p&gt;&#xA;" OwnerUserId="7772" LastEditorUserId="45" LastEditDate="2016-12-30T17:58:16.397" LastActivityDate="2016-12-30T17:58:16.397" Title="How can I play music while the screen is locked?" Tags="|release-loki|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9949" PostTypeId="1" CreationDate="2016-12-30T16:02:01.003" Score="1" ViewCount="255" Body="&lt;p&gt;at office i need to connect to local resources through wired network and internet thought wifi. I had tried enabling settings/network/ethernet/advanced settings/IPv4/Routes/Use this connection only for resources on its network. and i got the lan conection but the internet connection sometimes work and sometimes not, then i just need to unplug the cable, reload the browser and when i get back internet connection, replug the cable.&#xA;Also i had tried looking for the &lt;code&gt;ip route&lt;/code&gt; getting only the wireless conection as default:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default via 192.168.0.1 dev wlp3s0  proto static  metric 600 &#xA;192.168.0.0/24 dev wlp3s0  proto kernel  scope link  src 192.168.0.105  metric 600 &#xA;192.168.1.0/24 dev enp2s0  proto kernel  scope link  src 192.168.1.208  metric 100 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In ubuntu-gnome 16.10 i got this working but in elementary loki i got this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some ideas about it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD: Sorry for my bad english&lt;/p&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2018-03-03T02:29:55.917" Title="How do I connect to two networks (wired and Wi-Fi) at the same time?" Tags="|networking|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9950" PostTypeId="2" ParentId="9806" CreationDate="2016-12-30T16:33:50.663" Score="1" Body="&lt;p&gt;I'm sure this is bad form, but I'm going to post the answer to my own question since it involved a lot more than the answer provided by &lt;strong&gt;woopsi&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I &lt;em&gt;started&lt;/em&gt; there, but ran into problems at &lt;code&gt;sudo modprobe rtl8723be&lt;/code&gt;, aka loading the new driver. (I was able to do the previous unloading step without issue.) This step required a signed UEFI key for my machine, which was beyond my purview to write, so I had to disable Secure Boot. Unfortunately, I was no able to access the boot menu no matter what key I pressed, so I had to follow the advice &lt;a href=&quot;http://www.howtogeek.com/196655/how-to-configure-the-grub2-boot-loaders-settings/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; to modify the GRUB file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR, open up a terminal, type &lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;, change &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt; to &lt;code&gt;#GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt;, save, then update the actual GRUB file by typing &lt;code&gt;sudo update-grub&lt;/code&gt; and restarting. Access boot menu, disable Secure Boot, start eOS as normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, &lt;em&gt;just&lt;/em&gt; loading the new driver didn't work. After more digging, I discovered that this is because of an antenna issue with the network card, as outlined by lwfinger &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new/issues/88&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I needed to manually test the card's two antenna connectors to see which one actually works. Go back into terminal, &lt;code&gt;cd ~/rtlwifi_new&lt;/code&gt;, and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe -rv rtl8723be&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe -v rtl8723be ant_sel=1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check to see if this works. Get close to the router, toggle airplane mode, or what have you (no reboot required). If it doesn't, try the second antenna connector:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe -rv rtl8723be&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe -v rtl8723be ant_sel=2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Antenna connector #2 seems to work for more users than #1 - it was the second one in my case also.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At any rate, my wifi works now. I haven't restarted my machine since doing this, so I'm not sure if I need to run these commands at every restart yet, but if I do, the advice on how to automate that is &lt;a href=&quot;https://askubuntu.com/a/856020&quot;&gt;here&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;So I added these lines to &lt;code&gt;/etc/rc.local&lt;/code&gt; (above &lt;code&gt;exit 0&lt;/code&gt;) so that it would run each time my laptop boots up.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sleep 10&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo modprobe -r rtl8723be&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo modprobe rtl8723be ant_sel=1&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Note: change &lt;code&gt;ant_sel=1&lt;/code&gt; to &lt;code&gt;ant_sel=2&lt;/code&gt; if required.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Hope this helps somebody.&lt;/p&gt;&#xA;" OwnerUserId="7863" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2016-12-30T16:33:50.663" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9951" PostTypeId="2" ParentId="9948" CreationDate="2016-12-30T16:39:41.570" Score="0" Body="&lt;p&gt;The locking / freezing problem depends from your screen locker (&lt;code&gt;light-locker&lt;/code&gt; in  this case) that starts after you press &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt;. (It seems normal that changing the display manager does not resolve this problem).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to disable screen locking, debug or change light-locker.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2016-12-30T16:39:41.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9952" PostTypeId="1" AcceptedAnswerId="10206" CreationDate="2016-12-30T16:46:47.950" Score="3" ViewCount="724" Body="&lt;p&gt;i buy a new Asus laptop X555UB with intel core i7 6500 and had a clean installation of loki on it.&#xA;Everything is ok, but in chrome im experimenting some flickering/tearing as the &lt;a href=&quot;https://i.stack.imgur.com/CbLxK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CbLxK.png&quot; alt=&quot;attached&quot;&gt;&lt;/a&gt;screenshot &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had tried disabling hardware aceleration in chrome settings and disabling flash on chrome plugins but still getting this.&lt;/p&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2017-01-17T17:33:59.847" Title="Intel core i7 6500 skylake - Chrome flickering/tearing" Tags="|graphic-drivers|kernel|graphics|google-chrome|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9953" PostTypeId="1" CreationDate="2016-12-30T17:47:09.267" Score="2" ViewCount="838" Body="&lt;p&gt;How can I encrypt only the home folder? I do not want to enable the encryption from the installation procedure.&lt;/p&gt;&#xA;" OwnerUserId="2409" LastActivityDate="2020-04-11T15:01:30.353" Title="Encryption of the 'home' folder" Tags="|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9954" PostTypeId="2" ParentId="9948" CreationDate="2016-12-30T17:57:32.910" Score="2" Body="&lt;p&gt;This is an unfixible problem and a technical limitation of the display server (X11). Until we switch to Wayland as the display server, it won't be possible to allow music to continue playing while the screen is locked.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-30T17:57:32.910" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="9956" PostTypeId="2" ParentId="9946" CreationDate="2016-12-30T18:36:43.570" Score="0" Body="&lt;p&gt;This is largely a problem in the stylesheet you're using not targeting the right style classes for Freya's wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest thing to do would be to just switch back to the default stylesheet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not that, the next easiest thing to do would be to upgrade to Loki. Loki's wingpanel should work much better with 3rd-party stylesheets. However you may still encounter issues if the developer of that stylesheet isn't targeting Pantheon as an environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, you can try to edit the stylesheet yourself. But unless you're familiar with Gtk.CSS and using tools like Gtk Inspector this may be difficult and any updates to this stylesheet could break your changes.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-30T18:36:43.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9957" PostTypeId="2" ParentId="9953" CreationDate="2016-12-30T18:47:10.090" Score="1" Body="&lt;p&gt;Have you tried this:&#xA;&lt;a href=&quot;http://www.howtogeek.com/116032/how-to-encrypt-your-home-folder-after-installing-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to encrypt your home folder&lt;/a&gt; ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's for ubuntu, but elementary is based on it so it should be exactly the same. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-30T18:47:10.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9958" PostTypeId="2" ParentId="9936" CreationDate="2016-12-30T19:03:43.977" Score="1" Body="&lt;p&gt;If you had wifi and then suddenly it disappeared then you should first try switching off and on wifi and if doesn't work then just restart network manager with &lt;code&gt;sudo service network-manager restart&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still have no internet then just restart your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the same problem sometimes. I couldn't find out better solution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;:)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-30T19:03:43.977" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9959" PostTypeId="2" ParentId="9912" CreationDate="2016-12-30T19:06:15.697" Score="0" Body="&lt;p&gt;I'm not sure, but I think that it's like that by default in elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whenever, I connect my bluetooth speakers or headphones, I have to change output in sound settings.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2016-12-30T19:06:15.697" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9960" PostTypeId="1" CreationDate="2016-12-31T06:39:32.203" Score="0" ViewCount="691" Body="&lt;p&gt;I'm dual booting elementary os Loki with windows 10 (Acer Aspire R-13), the install seems to work fine and I got up and running but when I shut down and restart the computer it defaults back to windows unless...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the USB i installed off of is in the computer grub comes up for that I can press  type &quot;exit&quot; in then select &quot;Unknown Device:&quot; which is the install of element os, once i'm in the OS i can remove the USB no problem but I can't figure out the boot without it. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Random other info that may help, maybe but figured more info is useful&#xA;-I'm running a SSD&#xA;-My partions are labeled weird instead of sdXY they are under /dev/mapper and apparently can be gotten to by /dev/dm-Y&#xA;-I've tried reinstalling the OS &#xA;-I've tried fixing Grub to no avail&#xA;- current linux partitions are &quot;/&quot;, &quot;swap&quot; and &quot;/home&quot;&lt;/p&gt;&#xA;" OwnerUserId="7965" LastEditorUserId="9" LastEditDate="2017-06-30T17:34:49.330" LastActivityDate="2024-03-28T01:01:20.200" Title="elementary OS unable to boot" Tags="|boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9961" PostTypeId="2" ParentId="9907" CreationDate="2016-12-31T10:02:00.343" Score="6" Body="&lt;p&gt;Setting the &lt;code&gt;shell&lt;/code&gt; key to &lt;code&gt;bash --login&lt;/code&gt; doesn't work, however I managed to fix that with the following workaround:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;create a file named &lt;code&gt;bashlogin&lt;/code&gt; in &lt;code&gt;/bin&lt;/code&gt; directory with the following content&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;exec bash --login&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;mark it as executable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod +x /bin/bashlogin&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and finally set the terminal &lt;code&gt;shell&lt;/code&gt; key&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings shell 'bashlogin'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2608" LastEditorUserId="2608" LastEditDate="2019-01-20T15:20:10.227" LastActivityDate="2019-01-20T15:20:10.227" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="9962" PostTypeId="1" CreationDate="2016-12-31T11:08:40.853" Score="1" ViewCount="4023" Body="&lt;p&gt;I want to set custom locations for Document, Pictures, Videos and Music folders in elementary OS. This is the method I followed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/xdg/user-dirs.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# This controls the behaviour of xdg-user-dirs-update which is run on user login&#xA;# You can also have per-user config in ~/.config/user-dirs.conf, or specify&#xA;# the XDG_CONFIG_HOME and/or XDG_CONFIG_DIRS to override this&#xA;#&#xA;&#xA;enabled=False&#xA;&#xA;# This sets the filename encoding to use. You can specify an explicit&#xA;# encoding, or &quot;locale&quot; which means the encoding of the users locale&#xA;# will be used&#xA;filename_encoding=UTF-8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# This file is written by xdg-user-dirs-update&#xA;# If you want to change or add directories, just edit the line you're&#xA;# interested in. All local changes will be retained on the next run&#xA;# Format is XDG_xxx_DIR=&quot;$HOME/yyy&quot;, where yyy is a shell-escaped&#xA;# homedir-relative path, or XDG_xxx_DIR=&quot;/yyy&quot;, where /yyy is an&#xA;# absolute path. No other format is supported.&#xA;# &#xA;XDG_TEMPLATES_DIR=&quot;$HOME/Templates&quot;&#xA;XDG_PUBLICSHARE_DIR=&quot;$HOME/Public&quot;&#xA;XDG_DOWNLOAD_DIR=&quot;/media/user/Media/Downloads&quot;&#xA;XDG_DOCUMENTS_DIR=&quot;/media/user/Media/Documents&quot;&#xA;XDG_MUSIC_DIR=&quot;/media/user/Media/Music&quot;&#xA;XDG_PICTURES_DIR=&quot;/media/user/Media/Pictures&quot;&#xA;XDG_VIDEOS_DIR=&quot;/media/user/Media/Videos&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I used the command &lt;code&gt;xdg-user-dirs-update&lt;/code&gt; after editing these files. And also tried logging out and in and restarting the system too. But nothing worked. The pantheon-files still goes to the default $HOME/Documents path.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell what's wrong here or another workaround to achieve my purpose?&lt;/p&gt;&#xA;" OwnerUserId="7966" LastEditorUserId="578" LastEditDate="2016-12-31T14:36:04.670" LastActivityDate="2018-01-04T22:51:08.940" Title="How to set user dirs? (~/.config/user-dirs.dirs file is ignored)" Tags="|pantheon-files|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9963" PostTypeId="1" CreationDate="2016-12-31T14:14:06.763" Score="1" ViewCount="271" Body="&lt;p&gt;Quick question. Is there a way to check if full disk encryption is active in elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eduard&lt;/p&gt;&#xA;" OwnerUserId="7892" LastActivityDate="2019-04-24T10:02:50.637" Title="Check whether full disk encryption is active?" Tags="|encryption|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9965" PostTypeId="2" ParentId="9945" CreationDate="2016-12-31T18:37:01.467" Score="2" Body="&lt;p&gt;You have not done anything wrong. The developers have decided not enable 3rd-party indicators from Loki onward, and are discussing what the solution for such apps should be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I find a workaround, I will post it here.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-12-31T18:37:01.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9966" PostTypeId="2" ParentId="9942" CreationDate="2016-12-31T19:10:34.567" Score="2" Body="&lt;p&gt;The package manager (&lt;code&gt;apt&lt;/code&gt;) will not allow you to remove &lt;code&gt;xterm&lt;/code&gt;. This is there to protect you from yourself. If you attempt to remove it, it'll just install the 32bit package (&lt;code&gt;xterm:i386&lt;/code&gt;). This is an essential part of an X11 system.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2016-12-31T19:10:34.567" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9967" PostTypeId="1" AcceptedAnswerId="9968" CreationDate="2016-12-31T20:03:35.880" Score="0" ViewCount="2207" Body="&lt;p&gt;To install this I used an Ubuntu guide: &lt;a href=&quot;http://www.omgubuntu.co.uk/2016/09/install-budgie-desktop-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.omgubuntu.co.uk/2016/09/install-budgie-desktop-on-ubuntu&lt;/a&gt;&#xA;but it doesn't work as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't show a &lt;code&gt;unity-greeter&lt;/code&gt; session menu like described in the article. What did I do wrong, or rather what went wrong and how can I rectify this issue?&lt;/p&gt;&#xA;" OwnerUserId="7997" OwnerDisplayName="simdi ejinkeonye" LastEditorUserId="84" LastEditDate="2018-05-06T18:46:43.667" LastActivityDate="2018-05-06T18:46:43.667" Title="How to install budgie desktop on elementary OS (Loki)?" Tags="|release-loki|ubuntu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="9968" PostTypeId="2" ParentId="9967" CreationDate="2016-12-31T20:46:57.647" Score="2" Body="&lt;p&gt;Nothing went wrong and you didn't do anything wrong (except ask on the wrong stack exchange site and use poor formatting, but I fixed that for you :).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happened is that elementary uses a different greeter-session than Ubuntu (&lt;code&gt;pantheon-greeter&lt;/code&gt; as opposed to &lt;code&gt;unity-greeter&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You just need to chose your desktop environment before you login. You can do this no matter which greeter-session your system uses.&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2016-12-31T20:46:57.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9969" PostTypeId="1" AcceptedAnswerId="9970" CreationDate="2016-12-31T20:48:01.817" Score="1" ViewCount="4103" Body="&lt;p&gt;My connection is through proxy server. I managed to set the proxy server with my user name and my password and port 8080. I am able to do updates, upgrades and install packages. I even use TeamViewer properly through internet. The only problem I got is that any internet browser cannot connect, it says that it can't recognize &quot;http//:....&quot;. Please tell me where is the problem and if it is in the server how to fixe it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the answer! I have fixed the problem through the Network Settings/Proxy. I'll share my experience in case someone else happened to have this problem though.&#xA;So my problem was that in manual proxy settings under the section HTTPS Proxy (which is for secured HTTP proxy connection) I put this &lt;a href=&quot;http://UserName:Password@host:port&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://UserName:Password@host:port&lt;/a&gt;, but it needs only host:port, as it is written under the text box actually. So filing with &lt;strong&gt;proxy.something.com:8080&lt;/strong&gt; fixed the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. When I return back to the Proxy settings' screen all fields are blank and radio button is at automatic detect, don't know why is that but it works fine though.&lt;/p&gt;&#xA;" OwnerUserId="7970" LastEditorUserId="7970" LastEditDate="2017-01-02T16:11:57.167" LastActivityDate="2017-01-02T16:11:57.167" Title="Elementary OS Loki proxy settings" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9970" PostTypeId="2" ParentId="9969" CreationDate="2016-12-31T21:27:49.820" Score="3" Body="&lt;p&gt;I'm not sure what the cause of your problem is, but if it's due to faulty proxy settings, you can solve it by filling your proxy settings at System settings/Network/Proxy. If that doesn't help, let me know how you set your proxy to use apt.&lt;/p&gt;&#xA;" OwnerUserId="7756" LastEditorUserId="7756" LastEditDate="2017-01-01T13:01:34.197" LastActivityDate="2017-01-01T13:01:34.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9971" PostTypeId="2" ParentId="9960" CreationDate="2017-01-01T07:51:35.180" Score="0" Body="&lt;p&gt;The default boot manager is the Windows 10 boot loader, which can be bypassed though bios. You can boot into biod by rapidly pressing &lt;code&gt;esc&lt;/code&gt; while booting up your computer and then press &lt;code&gt;f9&lt;/code&gt; to bring up all the boot mangers. Then, navigate to &lt;code&gt;ubuntu&lt;/code&gt;, and then &lt;code&gt;Elementary OS Loki&lt;/code&gt;. After that the Elementary OS should begin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want to do this every time you want to boot into Elementary you can always install &lt;a href=&quot;http://www.rodsbooks.com/refind/&quot; rel=&quot;nofollow noreferrer&quot;&gt;rEFInd&lt;/a&gt;, assuming you have a EFI based system.&lt;/p&gt;&#xA;" OwnerUserId="7850" LastActivityDate="2017-01-01T07:51:35.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9973" PostTypeId="2" ParentId="2443" CreationDate="2017-01-01T11:09:44.187" Score="1" Body="&lt;p&gt;All the other answers didn't fix my problem.&#xA;I fixed it by installing the latest &lt;a href=&quot;https://developer.nvidia.com/vulkan-driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;NVidia drivers&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="325" LastActivityDate="2017-01-01T11:09:44.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9974" PostTypeId="2" ParentId="9963" CreationDate="2017-01-01T18:14:26.797" Score="1" Body="&lt;p&gt;In terminal use &lt;code&gt;ls -A /home&lt;/code&gt; command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is &lt;em&gt;.ecryptfs&lt;/em&gt; folder then it's encrypted. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-01T18:14:26.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9976" PostTypeId="2" ParentId="9768" CreationDate="2017-01-01T19:58:45.970" Score="0" Body="&lt;p&gt;It finally works not using an USB 3.0&lt;/p&gt;&#xA;" OwnerUserId="7834" LastActivityDate="2017-01-01T19:58:45.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9977" PostTypeId="1" CreationDate="2017-01-01T21:53:09.073" Score="1" ViewCount="387" Body="&lt;p&gt;Sometimes it shows up when I log in and it is a bit annoying. Is there any way of preventing it to appear?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-01-01T21:53:09.073" Title="How to disable &quot;You are connected!&quot; window?" Tags="|release-loki|window-management|internet|" AnswerCount="0" CommentCount="0" ClosedDate="2017-01-01T23:00:58.020" ContentLicense="CC BY-SA 3.0" />
  <row Id="9979" PostTypeId="2" ParentId="9962" CreationDate="2017-01-02T13:11:21.800" Score="3" Body="&lt;p&gt;This works for me:&#xA;1. Set enabled=True in /etc/xdg/user-dirs.conf&#xA;2. Edit ~/.config/user-dirs.dirs as required.&#xA;3. Log out and back in&#xA;4. In Files, delete the bookmarks to the old directories (which will no longer have the special icons) and create new ones to the new user directories (which will now have the special icons and breadcrumbs).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-01-02T13:11:21.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9980" PostTypeId="2" ParentId="9962" CreationDate="2017-01-02T14:46:29.440" Score="0" Body="&lt;p&gt;Just create symbolic links to the places that you prefer. For example I use a 2TB HDD mounted at /media/backuphd to which I symlinked the usual folders in my home folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s /media/backuphd/MyDocs /home/me/Documents&#xA;ln -s /media/backuphd/MyPics /home/me/Pictures&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and so on. This way you may keep all your documents and pictures even if you migrate your OS. &lt;/p&gt;&#xA;" OwnerUserId="7756" LastActivityDate="2017-01-02T14:46:29.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9981" PostTypeId="2" ParentId="9896" CreationDate="2017-01-02T17:55:39.513" Score="1" Body="&lt;p&gt;You would have to modify the stylesheet to use the desired &lt;code&gt;background-color&lt;/code&gt; for the &lt;code&gt;view&lt;/code&gt; class.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's possible, but you'll probably create a bunch of issues trying to do this. Keep in mind also, that any updates you get to the system stylesheet will overwrite changes you've made locally.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-01-02T17:55:39.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9982" PostTypeId="2" ParentId="8757" CreationDate="2017-01-03T02:43:42.197" Score="4" Body="&lt;p&gt;Unfortunately no. However, if necessary you can make a request for this feature at &lt;a href=&quot;https://launchpad.net/elementaryos&quot; rel=&quot;noreferrer&quot;&gt;https://launchpad.net/elementaryos&lt;/a&gt; . Otherwise, you can follow these steps to (kind of) peek at the dock:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold down control and right click the dock at the same time.&lt;/li&gt;&#xA;&lt;li&gt;Select preferences.&lt;/li&gt;&#xA;&lt;li&gt;When the window appears, select the &quot;Behaviour&quot; category.&lt;/li&gt;&#xA;&lt;li&gt;In the drop down, select &quot;Dodge active window&quot; (if it isn't already turned on. If it is, please ignore steps 1-5).&lt;/li&gt;&#xA;&lt;li&gt;Close this window.&lt;/li&gt;&#xA;&lt;li&gt;Now, you can push Super + Space (Super is the windows key on PC's and the command (⌘) key on a Mac) to show the applications menu which will also reveal the dock.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Screenshot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Push Super + Space and you have visibility to the dock! (push Super + Space again to close the menu and hide the dock&#xA;&lt;a href=&quot;https://i.stack.imgur.com/eK2vo.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eK2vo.png&quot; alt=&quot;The dock and the app menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7983" LastActivityDate="2017-01-03T02:43:42.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9984" PostTypeId="2" ParentId="7642" CreationDate="2017-01-03T09:47:54.010" Score="3" Body="&lt;p&gt;You need either &lt;code&gt;dconf-editor&lt;/code&gt; or command-line tool &lt;code&gt;gsettings&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;You can change the value of &lt;code&gt;net.launchpad.plank.enabled_docks&lt;/code&gt; to &lt;code&gt;['dock1','dock2']&lt;/code&gt; in order to enable a second dock,&lt;/li&gt;&#xA;&lt;li&gt;restart plank,&lt;/li&gt;&#xA;&lt;li&gt;change the preferences under &lt;code&gt;net.launchpad.plank.docks.dock2&lt;/code&gt; to setup the second dock (you will need to change at least the &lt;code&gt;net.launchpad.plank.docks.dock2.monitor&lt;/code&gt; value).&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You will still need the &lt;code&gt;.config/plank/dock[n]&lt;/code&gt; folders to store the launchers for each dock (you need to create them before restarting plank).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cf. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9084/how-to-duplicate-the-taskbar-on-the-second-monitor-on-loki?rq=1&quot;&gt;How to duplicate the taskbar on the second monitor on Loki?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-03T09:57:39.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="9985" PostTypeId="2" ParentId="9903" CreationDate="2017-01-03T10:26:09.963" Score="1" Body="&lt;p&gt;Looks like this is the relevant bug report: &lt;a href=&quot;https://bugs.launchpad.net/slingshot/+bug/1643014&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/slingshot/+bug/1643014&lt;/a&gt;&#xA;Fix seems released, not sure when we'll get it through the updates. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-01-03T10:26:09.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9988" PostTypeId="1" CreationDate="2017-01-03T17:18:10.777" Score="1" ViewCount="202" Body="&lt;p&gt;I'm running Elementary OS Loki on the newest Dell XPS 13. Been trying to setup a dual extended screen but I recently noticed that whenever I maximize an application on this screen it will maximize to only half of the width as the image shows:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/WtDlp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WtDlp.jpg&quot; alt=&quot;dual screen image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the output for &lt;code&gt;xrandr --current&lt;/code&gt; (not sure if relevant but might as well add it):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 3200 x 2880, maximum 32767 x 32767 eDP1 connected primary 3200x1800+0+1080 (normal left inverted right x axis y axis) 290mm x 170mm&#xA;    3200x1800     59.98*+  47.99  &#xA;    2880x1620     60.00  &#xA;    2560x1440     60.00  &#xA;    2048x1536     60.00  &#xA;    1920x1440     60.00  &#xA;    1856x1392     60.01  &#xA;    1792x1344     60.01  &#xA;    2048x1152     60.00  &#xA;    1920x1200     59.95  &#xA;    1920x1080     60.00    59.93  &#xA;    1600x1200     60.00  &#xA;    1680x1050     59.95    59.88  &#xA;    1600x1024     60.17  &#xA;    1400x1050     59.98  &#xA;    1600x900      60.00  &#xA;    1280x1024     60.02  &#xA;    1440x900      59.89  &#xA;    1280x960      60.00  &#xA;    1368x768      60.00  &#xA;    1360x768      59.80    59.96  &#xA;    1152x864      60.00  &#xA;    1280x720      60.00  &#xA;    1024x768      60.00  &#xA;    1024x576      60.00  &#xA;    960x540       60.00  &#xA;    800x600       60.32    56.25  &#xA;    864x486       60.00  &#xA;    640x480       59.94  &#xA;    720x405       60.00  &#xA;    640x360       60.00  &#xA;DP1 connected 1920x1080+625+0 (normal left inverted right x axis y axis) 510mm x 290mm&#xA;    1920x1080     60.00*+&#xA;    1600x900      60.00  &#xA;    1280x1024     75.02    60.02  &#xA;    1152x864      75.00  &#xA;    1024x768      75.08    60.00  &#xA;    800x600       75.00    60.32  &#xA;    640x480       75.00    60.00  &#xA;    720x400       70.08  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="693" LastEditorUserId="693" LastEditDate="2017-01-03T17:41:25.127" LastActivityDate="2017-01-03T17:41:25.127" Title="Maximize apps on second screen only maximizes to half the width" Tags="|release-loki|display|window-management|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="9989" PostTypeId="1" AcceptedAnswerId="9991" CreationDate="2017-01-03T18:33:45.823" Score="0" ViewCount="1255" Body="&lt;p&gt;Yesterday I installed Loki on a an HP 14 Chromebook. Everything is perfect except ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't get Chrome to install in the Elementary environment. I have downloaded the install file from Google and installed the &lt;strong&gt;GDebi Package Installer&lt;/strong&gt;. When I try to run the Chrome install package with either the &lt;strong&gt;GDebi installer&lt;/strong&gt; or &lt;strong&gt;Ubuntu Software Center&lt;/strong&gt;, I get the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Dependency is not satisfiable: libfontconfig1 (&amp;gt;=2.9.0)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran an update for this file with the following command:&#xA;&lt;code&gt;sudo apt-get install libfontconfig1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command results in the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libfontconfig1 is already the newest version. &#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. &#xA;(precise)asc@localhost:~$ sudo apt-get install libfontconfig &#xA;Reading package lists... Done &#xA;Building dependency tree &#xA;Reading state information... Done &#xA;libfontconfig1 is already the newest version. &#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running this command, the problem persists. The command results indicate that all is as it should be, but it still doesn't work. Can't figure out what to do next.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Chromium so am getting along, but would really like to have Chrome installed. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="7988" LastEditorUserId="578" LastEditDate="2017-01-03T19:58:25.083" LastActivityDate="2017-01-05T00:09:16.947" Title="Loki - running on a Chromebook using crouton" Tags="|release-loki|google-chrome|dependencies|chromebook|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="9990" PostTypeId="2" ParentId="1128" CreationDate="2017-01-03T19:48:34.413" Score="0" Body="&lt;p&gt;For anyone using Loki it's &lt;code&gt;Alt + Shift&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3943" LastActivityDate="2017-01-03T19:48:34.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9991" PostTypeId="2" ParentId="9989" CreationDate="2017-01-03T20:02:02.043" Score="1" Body="&lt;p&gt;You might want to install from a terminal with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo dpkg --install ~/Downloads/google-chrome-stable_current_amd64.deb&#xA; sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so that you get more verbose error messages.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-03T20:02:02.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="9993" PostTypeId="1" CreationDate="2017-01-03T21:01:32.880" Score="1" ViewCount="285" Body="&lt;p&gt;I just tried to download elementary OS after making a contribution and I am getting a page not found error when I click the download button in the popup. &lt;/p&gt;&#xA;" OwnerUserId="7993" LastEditorUserId="308" LastEditDate="2019-12-06T06:47:57.780" LastActivityDate="2019-12-06T06:47:57.780" Title="Download not working on homepage" Tags="|download|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-04T17:04:17.207" ContentLicense="CC BY-SA 4.0" />
  <row Id="9997" PostTypeId="1" CreationDate="2017-01-04T09:45:36.977" Score="3" ViewCount="545" Body="&lt;p&gt;I have a lenovo b50, recently installed elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the wifi is theoretically working at times, it keeps fooling around after coming back from sleep mode. What it does is, that it suddenly cannot detect any wifi connections, unless I type my network name into &quot;find hidden network&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;output of  sudo lshw -C network&#xA; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:08:00.0&#xA;       logical name: enp8s0&#xA;       version: 10&#xA;       serial: f0:76:1c:1f:6c:25&#xA;       size: 10Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:47 ioport:4000(size=256) memory:c2604000-c2604fff memory:c2600000-c2603fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: Wireless 3160&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:09:00.0&#xA;       logical name: wlp9s0&#xA;       version: 93&#xA;       serial: d0:7e:35:2d:40:bf&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-57-generic firmware=17.352738.0 ip=10.0.0.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn&#xA;       resources: irq:52 memory:c2500000-c2501fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8000" LastEditorUserId="16827" LastEditDate="2019-08-26T16:05:09.600" LastActivityDate="2019-08-26T16:05:09.600" Title="Wifi network keeps disappearing (Intel 3160 wireless card)" Tags="|release-loki|wifi|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="9999" PostTypeId="2" ParentId="9791" CreationDate="2017-01-04T13:46:59.423" Score="1" Body="&lt;p&gt;Do you mean something like this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gfycat.com/CraftyCooperativeHarrierhawk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gfycat.com/CraftyCooperativeHarrierhawk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I implemented this just for fun. Basically it works like this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Added DBus Functionality to Plank. This required to open 2 functions in HideManager.vala (hide and show) and a new Function in Interfaces.vala (i called id Show). Basically its the wrong place to add such a Functionality because it should only be used for Items on the Dock. But because its just a prototype so i added it there just for convencience. This is just a Interface for DBusManager.vala so i implemented it there for our functionality.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[DBus (name = &quot;net.launchpad.plank.Items&quot;)]&#xA;interface DBusItemsIface : GLib.Object&#xA;{&#xA;    /* omitted */&#xA;&#xA;    public abstract void show() throws GLib.IOError;&#xA;}&#xA;&#xA;class DBusItems : GLib.Object, Plank.DBusItemsIface {&#xA;&#xA;    /* ommited */&#xA;&#xA;    public void show()&#xA;    {&#xA;        if(controller.hide_manager.Hidden)&#xA;            controller.hide_manager.show();&#xA;        else {&#xA;            controller.hide_manager.hide();&#xA;        }&#xA;    }&#xA;}&#xA;&#xA;public class HideManager : GLib.Object&#xA;{&#xA;    public void hide ()&#xA;    {&#xA;        /* ommited */&#xA;    }&#xA;&#xA;    public void show ()&#xA;    {&#xA;        /* ommited */&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now we can send with dbus-send a signal to activate this functionality&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --session --type=method_call --dest=net.launchpad.plank.dock1 /net/launchpad/plank/dock1 net.launchpad.plank.Items.Show&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now make a script with that command and start it with a global Shortcut in Gala&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Was fun to do but i must say it isnt helpful at all. Because to be useful there should be a functionality in plank which could start applications with a shortcut (like long press Super -&gt; Plank appears -&gt; press 1 to start/switch to first starter)&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8002" LastActivityDate="2017-01-04T13:46:59.423" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10000" PostTypeId="1" CreationDate="2017-01-04T15:58:18.727" Score="4" ViewCount="16210" Body="&lt;p&gt;I booted into live CD and I got the options where you can try elementary OS or install it, but every time I choose one of them it turns into a black screen and then after a few second my monitor can't detect a signal from my computer.  This never happened to me on other distros just on this one. I have an AMD A6-7400k with r5 graphics and 4gb of ram&lt;/p&gt;&#xA;" OwnerUserId="8004" LastEditorUserId="16827" LastEditDate="2019-04-19T03:50:05.447" LastActivityDate="2021-12-18T02:26:11.810" Title="elementary OS won't boot past live CD screen" Tags="|system-installation|boot|" AnswerCount="2" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10001" PostTypeId="2" ParentId="9993" CreationDate="2017-01-04T16:04:42.937" Score="2" Body="&lt;p&gt;There was a temporary download issue on the website that has since &lt;a href=&quot;https://github.com/elementary/website/pull/1528&quot; rel=&quot;nofollow noreferrer&quot;&gt;been resolved&lt;/a&gt;. You can always re-visit the website and enter $0 to re-try the download.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-01-04T16:04:42.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10002" PostTypeId="1" CreationDate="2017-01-04T16:13:09.377" Score="2" ViewCount="2186" Body="&lt;p&gt;My &lt;strong&gt;Internet connection&lt;/strong&gt; is painfully &lt;strong&gt;slow&lt;/strong&gt; and irregular on &lt;strong&gt;elementary OS Loki.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm &lt;strong&gt;connected&lt;/strong&gt; to the Internet &lt;strong&gt;via WiFi through a PCI antenna&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I experience is that I get &lt;strong&gt;disconnected from time to time&lt;/strong&gt;, also the &lt;strong&gt;indicator shows a weak signal&lt;/strong&gt;, but I just restart the connection and it shows a strong one again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to download from the AppCenter or using &lt;em&gt;apt-get install&lt;/em&gt; is horrible. Right now I'm downloading the openjdk-9-jre, is a 183 MB download that is taking from hours to days according to the Terminal. This same download on my Windows partition would take from 15 to 25 minutes top.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use Popcorn Time and the Internet connection kept slowing until reaching 0 kbps, then I would restart the connection, it would comeback up and then down again. Using Transmission for torrents gets me the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Strangely, &lt;strong&gt;I can browse the web and watch stuff like YouTube normally&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;None of this&lt;/strong&gt; issues happen &lt;strong&gt;on&lt;/strong&gt; my &lt;strong&gt;Windows 10&lt;/strong&gt; partition, and they &lt;strong&gt;didn't appear while using elementary OS Luna or Freya&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need any Terminal input, just let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="291" LastEditorUserId="565" LastEditDate="2017-01-05T20:01:12.297" LastActivityDate="2017-01-07T19:20:49.290" Title="Slow Internet connection (WiFi) while using elementary OS Loki (Ralink RT3060)" Tags="|release-loki|wifi|networking|internet|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="10003" PostTypeId="1" AcceptedAnswerId="10007" CreationDate="2017-01-04T20:10:20.647" Score="2" ViewCount="4885" Body="&lt;p&gt;how are you?&lt;br&gt;&#xA;I want update to &lt;b&gt;kernel 4.9&lt;/b&gt;, but I not know if this can cause problems in my computer.&lt;/p&gt;&#xA;" OwnerUserId="8009" LastActivityDate="2017-02-02T12:38:03.803" Title="I can update to Linux Kernel 4.9?" Tags="|updates|kernel|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10004" PostTypeId="2" ParentId="9989" CreationDate="2017-01-04T21:59:46.750" Score="0" Body="&lt;p&gt;Thanks, &lt;em&gt;lemonslice&lt;/em&gt;! Excellent suggestion.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It occurs to me (DUH!) that I am not running the latest version of Ubuntu. The latest that crouton supported was ... I think ... Trusty. I'm thinking that this is perhaps the root of the issue?&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;I'm just digging into the nuts and bolts of Linux so that escaped me. Looks like I have three dependency issues:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;google-chrome-stable depends on libfontconfig1 (&amp;gt;= 2.9.0); however:&#xA;Version of libfontconfig1 on system is 2.8.0-3ubuntu9.2.&#xA;google-chrome-stable depends on libstdc++6 (&amp;gt;= 4.8.0); however:&#xA;Version of libstdc++6 on system is 4.6.3-1ubuntu5.&#xA;google-chrome-stable depends on lsb-base (&amp;gt;= 4.1); however:&#xA;Version of lsb-base on system is 4.0-0ubuntu20.3.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;strong&gt;sudo apt-get upgrade&lt;/strong&gt; on all of those, but it didn't result in anything.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;I am assuming that I need to somehow force an upgrade of those three files but have no idea how (or if that's even the right course).&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Full error message here:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(precise)asc@localhost:~$ sudo dpkg --install ~/Downloads/installs/google-chrome-stable_current_amd64.deb&#xA;(Reading database ... 115476 files and directories currently installed.)&#xA;Preparing to replace google-chrome-stable 55.0.2883.87-1 (using .../google-chrome-stable_current_amd64.deb) ...&#xA;Unpacking replacement google-chrome-stable ...&#xA;dpkg: dependency problems prevent configuration of google-chrome-stable:&#xA;google-chrome-stable depends on libfontconfig1 (&amp;gt;= 2.9.0); however:&#xA;Version of libfontconfig1 on system is 2.8.0-3ubuntu9.2.&#xA;google-chrome-stable depends on libstdc++6 (&amp;gt;= 4.8.0); however:&#xA;Version of libstdc++6 on system is 4.6.3-1ubuntu5.&#xA;google-chrome-stable depends on lsb-base (&amp;gt;= 4.1); however:&#xA;Version of lsb-base on system is 4.0-0ubuntu20.3.&#xA;dpkg: error processing google-chrome-stable (--install):&#xA;dependency problems - leaving unconfigured&#xA;Processing triggers for man-db ...&#xA;Processing triggers for bamfdaemon ...&#xA;Rebuilding /usr/share/applications/bamf.index...&#xA;Processing triggers for gnome-menus ...&#xA;Processing triggers for desktop-file-utils ...&#xA;Errors were encountered while processing:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;    google-chrome-stable&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;FWIW, apt-get check returns this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;google-chrome-stable : &#xA;Depends: libfontconfig1 (&amp;gt;= 2.9.0) but 2.8.0-3ubuntu9.2 is installed&#xA;Depends: libstdc++6 (&amp;gt;= 4.8.0) but 4.6.3-1ubuntu5 is installed&#xA;Depends: lsb-base (&amp;gt;= 4.1) but 4.0-0ubuntu20.3 is installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7988" LastEditorUserId="7988" LastEditDate="2017-01-05T00:09:16.947" LastActivityDate="2017-01-05T00:09:16.947" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10005" PostTypeId="1" AcceptedAnswerId="10008" CreationDate="2017-01-05T00:47:34.937" Score="1" ViewCount="132" Body="&lt;p&gt;Is there a way to do what the subject line says? I know in Firefox the default is to not highlight all text in address bar on single click. But this is easily changed in about:config. Is there a way for force this in Epiphany(Web)???&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-05T11:43:34.410" Title="Highlight text on single click - epiphany address bar" Tags="|settings|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10006" PostTypeId="2" ParentId="9843" CreationDate="2017-01-05T02:47:43.303" Score="-2" Body="&lt;p&gt;The wingpannel once dissapeared on me too To fix this, run this command in the terminal. (does not have to be root)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd $HOME cd .config rm -R *&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run this to restart the computer.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When you log back in, it should be back to normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tip: if you don't have a terminal in your dock, dont panic! you can always open a full terminal by pushing &lt;strong&gt;ctrl + alt + f1&lt;/strong&gt;. You can go back to the desktop by pushing &lt;strong&gt;ctrl + alt + f7&lt;/strong&gt;. Just remember these things:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;When logging in, use the nickname that you chose when installing.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;be careful with what you do. The terminal is a great way to ruin your system&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Always remember to use the command &quot;exit&quot; without the quotes to log back out. Failure to do this will result in the shell being open to anyone who passes by your computer.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="7983" LastEditorUserId="7983" LastEditDate="2017-01-06T00:25:55.570" LastActivityDate="2017-01-06T00:25:55.570" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10007" PostTypeId="2" ParentId="10003" CreationDate="2017-01-05T09:40:09.440" Score="3" Body="&lt;p&gt;You can always try to upgrade you kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as there is no 4.9 kernel package in elementary OS, you should understand the risks (as in: your system will not boot any more or there will be driver errors; there is only a very small chance of danger as in actually bricking it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are sure to go on with the upgrade, I would start at &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-05T09:40:09.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10008" PostTypeId="2" ParentId="10005" CreationDate="2017-01-05T11:43:34.410" Score="2" Body="&lt;p&gt;Click on the favicon next to the address (not the favicon on the tab).&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-01-05T11:43:34.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10010" PostTypeId="1" CreationDate="2017-01-05T12:31:42.170" Score="2" ViewCount="1285" Body="&lt;h1&gt;System Information&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -r&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;4.4.0-57-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsusb&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 002: ID 8087:8000 Intel Corp. &#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 002: ID 8087:8008 Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 003 Device 003: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0&#xA;Bus 003 Device 004: ID 0461:4d0f Primax Electronics, Ltd HP Optical Mouse&#xA;Bus 003 Device 002: ID 13d3:5170 IMC Networks &#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsusb&lt;/code&gt; (detailed):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 003 Device 003: ID 0cf3:3004 Atheros Communications, Inc. AR3012 Bluetooth 4.0&#xA;Couldn't open device, some information will be missing&#xA;Device Descriptor:&#xA;  bLength                18&#xA;  bDescriptorType         1&#xA;  bcdUSB               1.10&#xA;  bDeviceClass          224 Wireless&#xA;  bDeviceSubClass         1 Radio Frequency&#xA;  bDeviceProtocol         1 Bluetooth&#xA;  bMaxPacketSize0        64&#xA;  idVendor           0x0cf3 Atheros Communications, Inc.&#xA;  idProduct          0x3004 AR3012 Bluetooth 4.0&#xA;  bcdDevice            0.02&#xA;  iManufacturer           1 &#xA;  iProduct                2 &#xA;  iSerial                 3 &#xA;  bNumConfigurations      1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: ideapad_wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: ideapad_bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;3: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;11/01/2017:&lt;/strong&gt; Upon Jeremy31's instruction, &lt;code&gt;lspci -nnk | grep -iA2 net&lt;/code&gt; yields:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)&#xA;    Subsystem: Lenovo RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [17aa:3803]&#xA;    Kernel driver in use: r8169&#xA;    Kernel modules: r8169&#xA;&#xA;09:00.0 Network controller [0280]: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01)&#xA;    Subsystem: Lenovo AR9485 Wireless Network Adapter [17aa:3218]&#xA;    Kernel driver in use: ath9k&#xA;    Kernel modules: ath9k, wl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;11/01/2017:&lt;/strong&gt; &lt;code&gt;usb-devices | awk '/3004/' RS=&lt;/code&gt; yields [as asked by Jeremy (wa113y3s) &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1542743/comments/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;]:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=03 Dev#=  3 Spd=12  MxCh= 0&#xA;D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1&#xA;P:  Vendor=0cf3 ProdID=3004 Rev=00.02&#xA;S:  Manufacturer=Atheros Communications&#xA;S:  Product=Bluetooth USB Host Controller&#xA;S:  SerialNumber=Alaska Day 2006&#xA;C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA&#xA;I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb&#xA;I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This seems to be a non-Rome version according to what Jeremy posted.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Problem Solving&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;Default behavior&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;On fresh boot, I am able to switch on my bluetooth and connect to my  bluetooth speakers. During this time, &lt;code&gt;systemctl status bluetooth.service&lt;/code&gt; outputs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)&#xA;   Active: active (running) since Thu 2017-01-05 17:15:22 IST; 8min ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 894 (bluetoothd)&#xA;   Status: &quot;Running&quot;&#xA;   CGroup: /system.slice/bluetooth.service&#xA;           └─894 /usr/lib/bluetooth/bluetoothd&#xA;&#xA;Jan 05 17:15:23 z510 bluetoothd[894]: Not enough free handles to register service&#xA;Jan 05 17:15:23 z510 bluetoothd[894]: Sap driver initialization failed.&#xA;Jan 05 17:15:23 z510 bluetoothd[894]: sap-server: Operation not permitted (1)&#xA;Jan 05 17:15:33 z510 bluetoothd[894]: Failed to set mode: Blocked through rfkill (0x12)&#xA;Jan 05 17:16:00 z510 bluetoothd[894]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSource&#xA;Jan 05 17:16:00 z510 bluetoothd[894]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSink&#xA;Jan 05 17:16:06 z510 bluetoothd[894]: Failed to set mode: Blocked through rfkill (0x12)&#xA;Jan 05 17:16:26 z510 bluetoothd[894]: Failed to set mode: Blocked through rfkill (0x12)&#xA;Jan 05 17:16:51 z510 bluetoothd[894]: Failed to set mode: Blocked through rfkill (0x12)&#xA;Jan 05 17:16:59 z510 bluetoothd[894]: /org/bluez/hci0/dev_88_C6_26_6C_35_6B/fd0: fd(22) ready&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After about 3 to 4 minutes, bluetooth shows that it's still connected but stops working. At this point, &lt;code&gt;systemctl status bluetooth.service&lt;/code&gt; returns the exact same output as above. There is nothing new in the above logs.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Problem Solving&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Restarting the bluetooth service via &lt;code&gt;systemctl restart bluetooth.service&lt;/code&gt; outputs the following in the logs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)&#xA;   Active: active (running) since Thu 2017-01-05 17:23:44 IST; 2s ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 3760 (bluetoothd)&#xA;   Status: &quot;Running&quot;&#xA;   CGroup: /system.slice/bluetooth.service&#xA;           └─3760 /usr/lib/bluetooth/bluetoothd&#xA;&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Not enough free handles to register service&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Not enough free handles to register service&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Current Time Service could not be registered&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: gatt-time-server: Input/output error (5)&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Not enough free handles to register service&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Not enough free handles to register service&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Sap driver initialization failed.&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: sap-server: Operation not permitted (1)&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSource&#xA;Jan 05 17:23:44 z510 bluetoothd[3760]: Endpoint registered: sender=:1.55 path=/MediaEndpoint/A2DPSink&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I try to toggle via taskbar or Bluetooth in the System settings, it doesn't work. This is what I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cKzJm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cKzJm.png&quot; alt=&quot;Bluetooth toggle can be toggled but nothing else is usable&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;code&gt;systemctl status bluetooth.service&lt;/code&gt; now shows an error (due to switching the toggle):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Jan 05 17:23:55 z510 bluetoothd[3760]: Failed to set mode: Failed (0x03)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next, I check what &lt;code&gt;hciconfig hci0&lt;/code&gt; has to say:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hci0:   Type: BR/EDR  Bus: USB&#xA;    BD Address: A4:DB:30:D1:E5:52  ACL MTU: 1022:8  SCO MTU: 183:5&#xA;    DOWN &#xA;    RX bytes:115191 acl:36 sco:0 events:15936 errors:0&#xA;    TX bytes:9622901 acl:15651 sco:0 commands:280 errors:9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seeing as it is DOWN, I try to start it: &lt;code&gt;sudo hciconfig hci0 up&lt;/code&gt; and receive the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Can't init device hci0: Connection timed out (110)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Checking the bluetooth service logs again after trying to init &lt;code&gt;hci0&lt;/code&gt;, there is nothing new.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Solutions Tried&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;I have tried the following already with little success:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/791590/431957&quot;&gt;Pilot6's answer to Bluetooth not working in Ubuntu 16.04 with [0cf3:3004] Atheros adapter&lt;/a&gt;&lt;br&gt;&#xA;The version mentioned here does not work at all for me. The bluetooth icon disappears from wingpanel and bluetooth itself does not work at all.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I tried version 0.2 (latest revision &lt;a href=&quot;https://launchpad.net/~hanipouspilot/+archive/ubuntu/bluetooth&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; -- &lt;code&gt;btusb-lp1653843-dkms&lt;/code&gt;) by Pilot6. This seemed to work at first, but stopped working 3 to 4 minutes later, as it does on an untouched kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also disabled Secure Boot (requested when installing &lt;code&gt;btusb-lp1542743-dkms/0.1&lt;/code&gt;), but that did not help the issue in any way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 11/01/2017:&lt;/strong&gt; However, The behaviour seems to be inconsistent. &lt;code&gt;btusb-lp1653843-dkms/0.2&lt;/code&gt; worked for a few days (05/01/2017 to 11/01/2017) but stopped working altogether now, after my laptop woke up from sleep.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Links to Related Discussions&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;There are several discussions regarding this bluetooth chip online but they are beyond my scope:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=201646&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=201646&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://ask.fedoraproject.org/en/question/88030/bluetooth-headset-stops-working-suddenly/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ask.fedoraproject.org/en/question/88030/bluetooth-headset-stops-working-suddenly/&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=99371&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.kernel.org/show_bug.cgi?id=99371&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1542743&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/1542743&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Additional Notes&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;My internal audio has bugged out and the only way to get audio to work is to either connect headphones/speakers via a cable or use bluetooth audio. Both of them work, but I prefer the latter for portability. Currently, I have plugged in the bluetooth speakers via a 3.5mm cable and it works fine. However, I'd still like to be able to use bluetooth and avoid the hassle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5811" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2018-02-01T08:10:23.220" Title="0cf3:3004 Atheros AR3012 Bluetooth stop working within 5 minutes" Tags="|release-loki|bluetooth|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10011" PostTypeId="2" ParentId="9905" CreationDate="2017-01-05T13:20:29.787" Score="1" Body="&lt;p&gt;One way of solving this problem is to do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It might seem a bit drastic but it works.&lt;/p&gt;&#xA;" OwnerUserId="342" LastActivityDate="2017-01-05T13:20:29.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10012" PostTypeId="2" ParentId="10003" CreationDate="2017-01-05T14:59:01.837" Score="0" Body="&lt;p&gt;I had update my kernel to 4.6 trying to fix some flickering in chrome caused by skylake intel processor but not success. I think you can upgrade to 4.9 carefully.&lt;/p&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2017-01-05T14:59:01.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10013" PostTypeId="1" AcceptedAnswerId="10014" CreationDate="2017-01-05T16:08:46.460" Score="4" ViewCount="2957" Body="&lt;p&gt;The only thing that's preventing me from using other workspaces (besides the main one) is that I can't switch between them properly.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;ALT+TAB will only switch between apps in the current workspace.&lt;/li&gt;&#xA;&lt;li&gt;Super+Left/Right will iterate through an empty workspace, which is annoying.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Can I change any of these options?&lt;/p&gt;&#xA;" OwnerUserId="8017" LastEditorUserId="686" LastEditDate="2017-02-25T20:25:55.657" LastActivityDate="2017-02-25T20:25:55.657" Title="How to disable the empty workspace that appears when switching between them?" Tags="|workspace|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10014" PostTypeId="2" ParentId="10013" CreationDate="2017-01-05T18:03:26.310" Score="7" Body="&lt;p&gt;You can disable dynamic workspaces:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can set the number of workspaces wanted to NUMBER:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences num-workspaces NUMBER&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Nevertheless, even if you use dynamic workspaces, there are actually no &quot;empty workspaces&quot;…).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-05T18:03:26.310" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10015" PostTypeId="2" ParentId="9997" CreationDate="2017-01-05T19:55:08.320" Score="1" Body="&lt;p&gt;This is a known issue with Intel 3160 driver. You can install a forked driver to prevent power saving error after coming up from sleep mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed it on my Lenovo G50-80 with the same wifi card. Download and untar the new driver from:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dropbox.com/s/v6u99l59k47qwcu/lenovo-wifi-fix.tar.gz?dl=0&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bitseater's dropbox&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in your home folder. Now open a terminal &lt;strong&gt;into the new folder&lt;/strong&gt; and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-$(uname -r)&#xA;cp /usr/src/linux-headers-$(uname -r)/Module.symvers Module.symvers&#xA;sudo apt-get install build-essential&#xA;make -C /lib/modules/$(uname -r)/build M=$(pwd) modules&#xA;sudo cp ideapad-laptop.ko /lib/modules/$(uname -r)/kernel/drivers/platform/x86/&#xA;sudo rm /etc/modprobe.d/ideapad.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have added a readme file with the instructions. Reboot and try to connect to your SSID.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Updated&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To prevent wireless card stop working after coming from sleep mode, open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options iwlmvm power_scheme=1&quot; | sudo tee /etc/modprobe.d/iwlmvm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot your system. &lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2017-01-06T22:08:07.080" LastActivityDate="2017-01-06T22:08:07.080" CommentCount="17" ContentLicense="CC BY-SA 3.0" />
  <row Id="10016" PostTypeId="2" ParentId="10002" CreationDate="2017-01-05T20:09:17.893" Score="1" Body="&lt;p&gt;There are some known issues between Broadcom and Ralink drivers. You can try to remove and purge the first with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bcmwl-kernel-source &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and reboot your system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you hate reboot :P , you can try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rt2800pci&#xA;sudo apt-get purge bcmwl-kernel-source&#xA;sudo modprobe rt2800pci&#xA;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-01-05T20:09:17.893" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10017" PostTypeId="2" ParentId="10000" CreationDate="2017-01-05T20:31:11.417" Score="7" Body="&lt;p&gt;Try launching your kernel with &lt;em&gt;nomodeset&lt;/em&gt; option, following this instructions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;During the boot process, press and hold &lt;kbd&gt;SHIFT&lt;/kbd&gt; key. Now you&#xA;can see the grub menu.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;e&lt;/kbd&gt; key on first line to edit it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to line with the &lt;code&gt;quiet splash&lt;/code&gt;sentence. Something like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro quiet splash&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the &lt;code&gt;nomodeset&lt;/code&gt; option between &lt;code&gt;ro&lt;/code&gt; and &lt;code&gt;quiet splash&lt;/code&gt;. You must &#xA;see someting like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro nomedeset quiet splash&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt; to boot the kernel.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Report your experience to help others.&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-01-05T20:31:11.417" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10018" PostTypeId="1" CreationDate="2017-01-05T22:17:32.857" Score="1" ViewCount="184" Body="&lt;p&gt;My login screen looks this ugly and I do not know how to fix it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AUwte.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AUwte.jpg&quot; alt=&quot;Login Screen&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yet, when I execute Pantheon-Greeter in terminal looks fine. Tried to reinstall lightdm and pantheon-greeter but did not work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestion?&#xA;Thanx&lt;/p&gt;&#xA;" OwnerUserId="8010" LastActivityDate="2017-01-05T22:17:32.857" Title="Login screen fonts look weird" Tags="|greeter|fonts|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10019" PostTypeId="2" ParentId="7529" CreationDate="2017-01-06T02:01:39.253" Score="0" Body="&lt;p&gt;You need to allocate 512 more MB of ram to it is my guess, a different OS needs different things. At least different versions. But because it is graphical, allocate 1 GB of VRAM to it. Also remove &lt;strong&gt;Guest Additions.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8020" LastActivityDate="2017-01-06T02:01:39.253" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10021" PostTypeId="1" CreationDate="2017-01-06T08:25:55.810" Score="5" ViewCount="66" Body="&lt;p&gt;If I try to print an email from pantheon-mail it doesn't print headers. I didn't find an option to fix this.&#xA;If I use Geary instaed it will do it well.&lt;/p&gt;&#xA;" OwnerUserId="8023" LastActivityDate="2017-01-06T08:25:55.810" Title="How can I print Headers in Mail" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-22T18:40:08.883" ContentLicense="CC BY-SA 3.0" />
  <row Id="10022" PostTypeId="1" AcceptedAnswerId="10029" CreationDate="2017-01-06T10:12:18.607" Score="1" ViewCount="6905" Body="&lt;p&gt;Good day everyone, i'm planning to dual boot this OS to my windows 10 laptop and i'd like to know if i'm still going to install drivers like the wifi drivers etc. and if it still needed how could i install it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: i had tried this OS before as primary os (replacing the windows 10) but it seemed that drivers aren't supported and can't install so i'd like to know if it will be the same if i dual boot it. Please be easy to me because i'm a newbie to this linux distribution :). Pentium 3825u with 10gb of ram is some of my laptop's specification&lt;/p&gt;&#xA;" OwnerUserId="8024" LastActivityDate="2017-01-06T16:49:33.597" Title="Do i need to install again drivers in dual-booting this OS?" Tags="|dual-boot|drivers|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10023" PostTypeId="2" ParentId="10022" CreationDate="2017-01-06T10:16:36.553" Score="0" Body="&lt;p&gt;You will still need to install the the same drivers on the same computer under elementary OS whether you install two OS (as in dual boot) or only elementary OS (replacing Windows 10).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually the system kernel underlying elementary OS is Linux which is completely separated from the Windows kernel and its drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might help in your case: &lt;em&gt;with a working internet connection by ethernet, tethered or whatever means possible, please open a terminal and do&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install git&#xA;git clone https://github.com/kvalo/ath10k-firmware.git&#xA;sudo mkdir /lib/firmware/ath10k/QCA9377&#xA;sudo mkdir /lib/firmware/ath10k/QCA9377/hw1.0&#xA;cd ath10k-firmware/QCA9377/hw1.0&#xA;sudo cp *  /lib/firmware/ath10k/QCA9377/hw1.0&#xA;cd /lib/firmware/ath10k/QCA9377/hw1.0&#xA;sudo mv firmware-5.bin_WLAN.TF.1.0-00267-1  firmware-5.bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot and your wireless should be working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/763080/no-wifi-in-qualcom-atheros-ubuntu-16-04-acer-aspire-e-15&quot;&gt;https://askubuntu.com/questions/763080/no-wifi-in-qualcom-atheros-ubuntu-16-04-acer-aspire-e-15&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-01-06T16:49:33.597" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10026" PostTypeId="2" ParentId="9949" CreationDate="2017-01-06T14:18:25.640" Score="1" Body="&lt;p&gt;i had solved this by adding some lines to /etc/network/interfaces&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;auto enp2s0&#xA;iface enp2s0 inet dhcp&#xA;metric 601&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where enp2s0 is my wired interface and 601 is the new metric having wifi 600 metric.&lt;/p&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2017-01-06T14:18:25.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10028" PostTypeId="1" CreationDate="2017-01-06T15:32:47.717" Score="1" ViewCount="135" Body="&lt;p&gt;I've managed to pair a microsoft bluetooth mouse without a passkey. When pairing the keyboard a popup with a passkey appears and I've tried entering it into the keyboard as well as the laptop but it always fails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a system76 laptop that has elementaryOS installed. I've also installed the system-76 drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vjn7s.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vjn7s.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8029" LastActivityDate="2017-01-06T15:32:47.717" Title="bluetooth pairing microsoft ergonomic keyboard" Tags="|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10029" PostTypeId="2" ParentId="10022" CreationDate="2017-01-06T16:03:40.733" Score="0" Body="&lt;p&gt;In dual boot, both systems are separated, so you need to install drivers in both systems - especially that windows drivers and elementary drivers are different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you say that you used elementary before and had no drivers then tell us what was missing. Because some drivers come with the system, but some of them you need to install manually (usually by adding packages with a lot of drivers to your computer [as I remember I had to install package for DVD player in my computer]). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, sometimes you need to download packages from producer's website (for example not common brands of printers requires this)  and usually they have drivers for linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the worst of the worst situation you may not be able to install drivers, because there are only windows or OSX drivers. (In my whole life I had this situation only one time when I bought a new laptop 2in1 and there were no soundcard drivers for it [it was too new ;) ]. But some people reported that and after a while these drivers existed for linux :) )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are affraid that you'll have to install drivers for every small thing in your computer -wifi, sound, usb, hdmi etc. then you'll not :D [as soon as you don't have some bizzare computer from China or something]. I think that 99.9% of drivers for these most common brands exist and if not then it'll probably exist soon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So don't worry and go for elementary!&#xA;If you'll have any problem, we're here to help you :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-06T16:03:40.733" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10032" PostTypeId="2" ParentId="8579" CreationDate="2017-01-06T22:06:47.333" Score="1" Body="&lt;p&gt;I have seen this issue pop up a few times when trying to copy items to a USB stick in elementary OS. To solve it, I just make sure I am properly unmounting the USB key before removing it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To unmount the drive in elementary OS please do the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open up the &lt;code&gt;Files&lt;/code&gt; app&lt;/li&gt;&#xA;&lt;li&gt;Find your drive in the &lt;code&gt;Devices&lt;/code&gt; section in the left hand menus of the Files app.&lt;/li&gt;&#xA;&lt;li&gt;Click the unmount icon to the right of the drive in question. It looks like an arrow pointing up.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After you unmount the drive it should be safe to move to a different machine, or even the same machine, to test and verify that your files are still there. Good luck.&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-01-06T22:06:47.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10033" PostTypeId="1" CreationDate="2017-01-06T22:11:21.207" Score="0" ViewCount="142" Body="&lt;p&gt;I have a lenovo thinkpad w550s with the following specs:&#xA;-Intel core i7 5500U&#xA;-8gb ram&#xA;-256 ssd&#xA;-nvidia QuadroK620m&#xA;- full hd screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I wanted to uninstall the windows and install the elementary 0.4 Loki and use it as my only operating system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does the elementary 0.4 Loki run well and without problems on my pc?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="8034" LastEditorUserId="8034" LastEditDate="2017-01-06T22:16:52.753" LastActivityDate="2017-01-07T14:45:53.780" Title="Can my Thinkpad w550s run elementary os with no problem?" Tags="|nvidia|lenovo|thinkpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10034" PostTypeId="2" ParentId="10033" CreationDate="2017-01-06T23:09:07.403" Score="0" Body="&lt;p&gt;When you boot up the elementary 0.4 Loki you will see 2 options on the left Try elementary and on the right the Install elementary. I would suggest to select the Try elemetary options and test everything first and configure everything you can work with it. If you're thinking this works you can install elemetary afterwards.&lt;/p&gt;&#xA;" OwnerDisplayName="user7713" LastActivityDate="2017-01-06T23:09:07.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10036" PostTypeId="1" AcceptedAnswerId="10038" CreationDate="2017-01-07T04:08:22.623" Score="0" ViewCount="586" Body="&lt;p&gt;After rebooting, I need to manually turn on bluetooth and click to connect my mouse.  Is there a way to tell Loki to remember from last time that bluetooth was on and to reconnect the mouse?&lt;/p&gt;&#xA;" OwnerUserId="6832" LastActivityDate="2017-01-07T09:53:40.027" Title="Bluetooth turns off after reboot" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10038" PostTypeId="2" ParentId="10036" CreationDate="2017-01-07T09:53:40.027" Score="2" Body="&lt;p&gt;In terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt; file.&#xA;There you'll find settings for bluetooth.&#xA;I see that the last line is about AutoEnable, change it to true.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-07T09:53:40.027" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10039" PostTypeId="2" ParentId="10033" CreationDate="2017-01-07T14:45:53.780" Score="1" Body="&lt;p&gt;It's likely a good sign that Ubuntu has &lt;a href=&quot;https://certification.ubuntu.com/certification/hardware/201412-16338/&quot; rel=&quot;nofollow noreferrer&quot;&gt;certified&lt;/a&gt; the Lenovo w550s, and Lenovo's have alsways worked flawlessly for me (currently on a t450), but it's always a good idea to test a number your usual tasks from a live USB.&lt;/p&gt;&#xA;" OwnerUserId="8019" LastActivityDate="2017-01-07T14:45:53.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10040" PostTypeId="2" ParentId="8159" CreationDate="2017-01-07T14:58:23.030" Score="1" Body="&lt;p&gt;The method that &lt;a href=&quot;https://elementaryos.stackexchange.com/users/45/daniel-for%C3%A9&quot;&gt;Daniel&lt;/a&gt; would prefer is to use dconf-editor. Once installed (from the AppCenter), Ctrl-f and search for color, keep hitting 'next' until you find the one that applies to font color.&lt;/p&gt;&#xA;" OwnerUserId="8019" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-07T14:58:23.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10042" PostTypeId="2" ParentId="9997" CreationDate="2017-01-07T17:40:45.307" Score="0" Body="&lt;p&gt;You can mange options with changing the parameters in /erc/modprobe.d/iwlmvm.conf.  To know the avalaibles parameters try from terminal with &lt;strong&gt;modinfo iwlmvm&lt;/strong&gt;. Try too with the parameters of iwlwifi: &lt;strong&gt;modinfo&lt;/strong&gt; &lt;strong&gt;iwlwifi&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-01-07T17:40:45.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10044" PostTypeId="1" AcceptedAnswerId="10056" CreationDate="2017-01-08T01:13:55.643" Score="1" ViewCount="920" Body="&lt;p&gt;I need to remap the Capslock key of my keyboard to backspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -option caps:backspace &amp;amp; xset r 66 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which works perfectly when run from the terminal. But if I set it to run at startup as a custom command trough &lt;code&gt;System setings/Aplications/Startup&lt;/code&gt; (translated from Spanish), it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2017-01-09T02:38:18.870" LastActivityDate="2017-01-09T02:39:57.503" Title="Custom command won't run at startup" Tags="|release-loki|startup|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10045" PostTypeId="1" CreationDate="2017-01-08T01:52:22.650" Score="5" ViewCount="1392" Body="&lt;p&gt;I've just recently moved from Fedora to Elementary, and this is just about the only thing I miss.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to set a keybind to cycle through tabs in the terminal window, I'm used to running vim in one tab and use the other tab to compile or run code. I'm so used to having this feature bound to  (left and right), and using the mouse to cycle between the tabs is just awkward and is to slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution I've found is to install gnome-terminal, but I really like the sleek looks of the built in one (pantheon) so I hope there is a way to achieve this.&lt;/p&gt;&#xA;" OwnerUserId="8047" LastEditorUserId="578" LastEditDate="2017-01-08T13:19:49.037" LastActivityDate="2017-11-10T07:51:25.590" Title="Pantheon-terminal key binds" Tags="|pantheon-terminal|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10046" PostTypeId="1" CreationDate="2017-01-08T02:09:26.393" Score="0" ViewCount="241" Body="&lt;p&gt;After finishing a fresh install of elementary OS Loki I tried installing &lt;code&gt;git&lt;/code&gt; using apt-get but got the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Package 'git' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried installing &lt;code&gt;apt&lt;/code&gt; but the same error occurs. All of my lists and therefore repositories are in order.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After further instpection I found that &lt;code&gt;apt-get&lt;/code&gt; cannot find an installation candidate for &lt;em&gt;any&lt;/em&gt; package.&lt;/p&gt;&#xA;" OwnerUserId="8048" LastActivityDate="2017-01-08T02:09:26.393" Title="apt-get can't locate any package after fresh install" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10047" PostTypeId="2" ParentId="10046" CreationDate="2017-01-08T02:09:26.393" Score="1" Body="&lt;p&gt;&lt;strong&gt;For me all that was required was a restart after the first boot.&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following articles may be helpful if this error persists, though:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/739959/unable-to-install-git-on-ubuntu-15-10&quot;&gt;Unable to install git on Ubuntu 15.10&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/296488/e-package-any-package-has-no-installation-candidate#&quot;&gt;E: Package 'any package' has no installation candidate&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="8048" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-01-08T02:09:26.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10048" PostTypeId="1" CreationDate="2017-01-08T04:07:28.697" Score="5" ViewCount="6827" Body="&lt;p&gt;I am a newcomer to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am struggling with syncing Apple Calendar (iCal) in the elementary OS Calendar app. I tried to &quot;make it public; copy URL and login with iCloud Login/pass&quot; - but it keeps asking for iCloud credentials and doesn't sync.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same issue happens with Google Calendar, with a personal Gmail account and with a Google Apps Enterprise account, both with 2FA enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the iCal issue, I really don't know what to do. Google Calendar wise, I didn't try to setup using &quot;App Password&quot; option, yet.&#xA;Thoughts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using the latest eOS Loki's update.&lt;/p&gt;&#xA;" OwnerUserId="8050" LastEditorUserId="84" LastEditDate="2018-05-06T18:23:09.093" LastActivityDate="2020-02-19T10:32:42.587" Title="Sync Apple Calendar &amp; Google Calendar into native Calendar application" Tags="|release-loki|calendar|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10049" PostTypeId="1" AcceptedAnswerId="10051" CreationDate="2017-01-08T05:23:31.917" Score="0" ViewCount="9345" Body="&lt;p&gt;I want to put a folder on &lt;code&gt;/usr/share/themes&lt;/code&gt; but it says permission denied. How can i paste a folder on this location?&lt;/p&gt;&#xA;" OwnerUserId="8024" LastEditorUserId="578" LastEditDate="2017-01-08T08:55:49.773" LastActivityDate="2017-01-08T17:22:56.090" Title="How to move folder in /usr/share/themes" Tags="|settings|themes|sudo|pkexec|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10051" PostTypeId="2" ParentId="10049" CreationDate="2017-01-08T08:50:45.507" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You can right-click on the &lt;em&gt;Files&lt;/em&gt; icon in the dock and select &lt;em&gt;New Window As Administrator&lt;/em&gt; from the menu. Once the window has opened you can paste your folder there. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Or you can do it in a terminal with &lt;code&gt;sudo&lt;/code&gt; as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv original_folder /usr/share/themes&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-01-08T17:22:56.090" LastActivityDate="2017-01-08T17:22:56.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10052" PostTypeId="2" ParentId="10045" CreationDate="2017-01-08T09:05:09.837" Score="8" Body="&lt;p&gt;In the Pantheon Terminal you can move between terminal tabs with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;&amp;larr;&lt;/kbd&gt; and &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;&amp;rarr;&lt;/kbd&gt; respectively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might as well be interested in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/981/list-of-keyboard-shortcuts-for-terminal&quot;&gt;List of keyboard shortcuts for Terminal&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-08T09:05:09.837" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10053" PostTypeId="1" CreationDate="2017-01-08T12:20:53.180" Score="2" ViewCount="1482" Body="&lt;p&gt;I didn't realize firefox could be downloaded inside of OS so I went online and found this code to type in the terminal. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there any chance I got a malware version? &lt;/p&gt;&#xA;" OwnerUserId="8053" LastEditorUserId="578" LastEditDate="2017-01-08T13:17:32.387" LastActivityDate="2017-01-08T14:05:19.350" Title="Did I install Firefox right and safely?" Tags="|security|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10054" PostTypeId="2" ParentId="8882" CreationDate="2017-01-08T12:39:53.127" Score="1" Body="&lt;p&gt;The module is not loading automatically. You can run: &lt;code&gt;sudo modprobe 8192eu&lt;/code&gt; If it works the adapter, you can add the line &lt;code&gt;8192eu&lt;/code&gt; &#xA;in the &lt;code&gt;/etc/modules.conf&lt;/code&gt; file  and try restart.&lt;/p&gt;&#xA;" OwnerUserId="8054" LastEditorUserId="26" LastEditDate="2017-01-15T19:08:53.410" LastActivityDate="2017-01-15T19:08:53.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10055" PostTypeId="2" ParentId="10053" CreationDate="2017-01-08T13:16:58.237" Score="2" Body="&lt;p&gt;You actually did install Firefox the safe way inside the OS. However, you used the command line instead of a graphical frontend. So no worries, there is nothing wrong with your Firefox installation, both alternatives have the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under elementary OS / Linux often &quot;there is more than one way to do it…&quot;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-08T13:16:58.237" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10056" PostTypeId="2" ParentId="10044" CreationDate="2017-01-08T13:34:28.823" Score="1" Body="&lt;p&gt;These are actually two commands, you might want to create a startup script &lt;code&gt;~/.local/bin/remap_capslock&lt;/code&gt; with the contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;setxkbmap -option caps:backspace &amp;amp;&#xA;xset r 66 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;set it to executable&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x ~/.local/bin/remap_capslock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and run this script at startup&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-01-08T17:21:42.700" LastActivityDate="2017-01-08T17:21:42.700" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10060" PostTypeId="1" CreationDate="2017-01-08T18:24:46.603" Score="1" ViewCount="327" Body="&lt;p&gt;I have no idea what happened. All of a sudden applications on elementary started having white gaps and misplaced content. This happened after I tried to install GNOME Builder. Can some one help me out without needing to reinstall Elementary? Here are some images:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Dph9C.png&quot; alt=&quot;screenshot 1&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/sLqay.png&quot; alt=&quot;screenshot 2&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="7850" LastEditorUserId="84" LastEditDate="2018-05-06T18:20:48.153" LastActivityDate="2018-05-06T18:20:48.153" Title="UI is messed up, how to restore the original?" Tags="|user-interface|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="10061" PostTypeId="1" CreationDate="2017-01-08T18:58:39.103" Score="1" ViewCount="5058" Body="&lt;p&gt;I found another thread about this and it was suggested that &quot;go to the aplications menu (at the left of the top of your screen) and look for software center, from there you can install and uninstall a lot of things with just a click&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I don't have software center in my applications!?&lt;/p&gt;&#xA;" OwnerUserId="8059" LastActivityDate="2017-01-09T07:33:45.760" Title="How do I uninstall an app?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10062" PostTypeId="1" CreationDate="2017-01-08T19:38:02.397" Score="1" ViewCount="941" Body="&lt;p&gt;I installed the Nvidia driver using Ubuntu method (Addition drivers tab under software &amp;amp; updates). It works great so far, but every time Elementary updates kernel system would not boot up. The only way is to boot the previous kernel version, uninstall Nvidia. Boot the current kernel and install Nvidia again. This is a strange behavior omho. My previous distro was OpenSuSE and it never had a problem like that.&#xA;Does anyone know what to do to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="8060" LastEditorUserId="578" LastEditDate="2017-01-08T20:19:22.873" LastActivityDate="2023-12-23T09:04:20.490" Title="Trouble with Nvidia driver under Loki" Tags="|boot|graphic-drivers|nvidia|kernel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10063" PostTypeId="1" CreationDate="2017-01-08T19:51:20.063" Score="3" ViewCount="243" Body="&lt;p&gt;I spent researching and trying this for about a whole day. I have some windows VST such as Softube, BIAS FX and Surfer EQ that I'd like to use with Reaper (running on WINE). There were some different apps that promised to run windows VST but I could not make any of them work. I must say I'm newbie in Linux and using terminal but I tried my best. If someone could walk me through how to make these VSTs work I'd be so greatful!&lt;/p&gt;&#xA;" OwnerUserId="8059" LastActivityDate="2017-02-14T11:59:50.663" Title="VST on Elementary" Tags="|software-installation|audio|" AnswerCount="1" CommentCount="1" ClosedDate="2017-02-27T10:00:11.630" ContentLicense="CC BY-SA 3.0" />
  <row Id="10064" PostTypeId="2" ParentId="10061" CreationDate="2017-01-08T20:22:03.047" Score="1" Body="&lt;p&gt;In elementary OS 0.4 loki it is called &lt;em&gt;AppCenter&lt;/em&gt;. Under the &lt;em&gt;Updates&lt;/em&gt; tab you can look at the list of the apps installed and uninstall those you want to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some applications you can only install/remove with the command line. To list/remove them you can use the command line tool &lt;code&gt;apt&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@host:~$ apt-cache search keepass&#xA;keepass2 - Password manager&#xA;keepass2-doc - Password manager - Documentation&#xA;keepassx - Cross Platform Password Manager&#xA;kpcli - command line interface to KeePassX password manager databases&#xA;libfile-keepass-perl - interface to KeePass V1 and V2 database files&#xA;&#xA;user@host:~$ apt remove keepass2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-01-09T07:33:45.760" LastActivityDate="2017-01-09T07:33:45.760" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10065" PostTypeId="1" CreationDate="2017-01-08T20:27:49.830" Score="2" ViewCount="2385" Body="&lt;p&gt;I have Elementary OS Loki installed on my Dell XPS 15, I've got it paired to my UE Boom 2 and Bose QuietControl 30, but they aren't showing up as a possible Sound output. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Their indicated type is Headphones. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to work with them on my old 17&quot; MacBook pro with Elementary Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get Elementary OS installed I followed the following blog post, which included a bluetooth fix. &#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2317843&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2317843&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I think I got it working for my Bose QC... Advised by the following question I installed &lt;code&gt;bluetooth&lt;/code&gt; and &lt;code&gt;pulseaudio-module-bluetooth&lt;/code&gt;. Maybe that helped. I did need to reboot and re-pair. &#xA;&lt;a href=&quot;https://askubuntu.com/questions/689281/pulseaudio-can-not-load-bluetooth-module-15-10-16-04-16-10&quot;&gt;https://askubuntu.com/questions/689281/pulseaudio-can-not-load-bluetooth-module-15-10-16-04-16-10&lt;/a&gt;&#xA;Strangely enough I still can't get my UE Boom 2 to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 2:&#xA;Seeing that lot's of people switched out the Killer wifi card in the XPS 13 line (in my case the Killer 1535), for the Intel 8265, since intel drivers would work better on Linux I thought I'd tried the same. It didn't went well I'm afraid, I had to upgrade the Kernel from the default 4.4 to +4.6 for it to be recognized. But then the bluetooth connection was disconnected frequently, usually after a few minutes. (I also tried removing tlp and downloading new drivers from &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware.git&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware.git&lt;/a&gt; but that didn't seem to help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 3: I've upgraded to the latest elementary OS Juno (based on Ubuntu Bionic 18.04) and now everything works! On a fresh installation I can easily pair with my &lt;em&gt;Bose QuietControl 30&lt;/em&gt; and &lt;em&gt;UE Boom 2&lt;/em&gt; and use them as sound output. No extra applications or tweaks required.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-09-18T10:44:18.297" LastActivityDate="2018-11-17T15:01:25.257" Title="Bluetooth headphones not showing up as sound output on Dell XPS 15" Tags="|release-loki|sound|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10066" PostTypeId="1" CreationDate="2017-01-08T20:56:53.410" Score="1" ViewCount="26" Body="&lt;p&gt;I will soon be in charge of multiple screens for scene at a concert. Those screens are centralised and a video output will be give to me. I'am looking for a way to divide this video output into two virtuals parts in my computer. The left part and the right part.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The goal is to show different visuals on the two parts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help&lt;/p&gt;&#xA;" OwnerUserId="8062" LastActivityDate="2017-01-08T20:56:53.410" Title="Divide a video output" Tags="|videos|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10067" PostTypeId="1" CreationDate="2017-01-09T00:02:13.540" Score="1" ViewCount="407" Body="&lt;p&gt;Slingshot is the only aspect of the pantheon DE that bugs me a little.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the left-top corner you can see the &quot;Applications&quot; button, it opens slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would want that this wingpanel button opens Slingscold instead of Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I achieve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="8064" LastActivityDate="2017-01-09T00:02:13.540" Title="Slingscold wingpanel integration" Tags="|wingpanel|slingshot|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10068" PostTypeId="2" ParentId="10062" CreationDate="2017-01-09T02:20:31.910" Score="0" Body="&lt;p&gt;Make a backup and then re-install elementary OS. That fixed it for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't use &quot;software update&quot;.&lt;/p&gt;&#xA;" OwnerUserId="8065" LastEditorUserId="5722" LastEditDate="2017-01-24T18:58:27.457" LastActivityDate="2017-01-24T18:58:27.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10069" PostTypeId="2" ParentId="10044" CreationDate="2017-01-09T02:39:57.503" Score="1" Body="&lt;p&gt;After making this question I realized that elementary OS can do this via settings, with no need to mess with configuration files. Just go to &lt;code&gt;System settings/Keyboard/Layout&lt;/code&gt; and select your desired &lt;code&gt;Capslock&lt;/code&gt; behaviour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DVmGR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DVmGR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The bad news is that it doesn't work if you keep the key pressed (as the &lt;code&gt;Backspace&lt;/code&gt; key does)&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2017-01-09T02:39:57.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10071" PostTypeId="1" CreationDate="2017-01-09T06:51:41.583" Score="1" ViewCount="422" Body="&lt;p&gt;In &lt;strong&gt;elementary OS&lt;/strong&gt; (both &lt;strong&gt;Freya&lt;/strong&gt; and &lt;strong&gt;Loki&lt;/strong&gt;) my laptop's sound is quiet , sometimes distorted and any volume level below 50 % can hardly be heard (100 % is also not loud enough).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;strong&gt;Windows 10&lt;/strong&gt; (with sound drivers) the speakers are much more powerful and louder and can be heard even at 10 % volume.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do to make the speakers louder on &lt;strong&gt;elementary OS&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a &lt;strong&gt;HP Pavilion g7 2269wm&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="3757" LastActivityDate="2017-07-15T11:27:07.140" Title="HP Pavilion g7 sound not loud enough in elementary OS" Tags="|release-loki|sound|laptop|hp|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10072" PostTypeId="1" AcceptedAnswerId="10088" CreationDate="2017-01-09T08:58:45.043" Score="1" ViewCount="1078" Body="&lt;p&gt;My printer is a Canon iSensys MF4010. Once connected elementary automatically installed its driver and informed me it's ready. I clicked on the info icon in the printer settings and in the drop down there is a &quot;print test page&quot; button, once clicking on it nothing happens. I then created a doc in libre office and tried to print it, it does nothing either. It's not even listed as a print job. What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="8059" LastActivityDate="2017-01-09T20:40:50.963" Title="Printer does not work" Tags="|printer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10074" PostTypeId="2" ParentId="10071" CreationDate="2017-01-09T10:02:05.903" Score="1" Body="&lt;p&gt;The fact that the sound is distorted and the great difference to what happens in Windows may indicate a driver or codec problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To boost sound above 100%: System Settings - Sounds: &quot;Allow louder than 100%&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/f5JC1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/f5JC1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing &lt;code&gt;pavucontrol&lt;/code&gt; can be useful for more options.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-01-09T10:02:05.903" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10076" PostTypeId="2" ParentId="7652" CreationDate="2017-01-09T13:02:55.453" Score="1" Body="&lt;p&gt;The &quot;Can not find /boot&quot; is rather odd, I suggest following a tutorial in details to install rEFInd and create your bootable usb device. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the black screen, this is a kown issue with the MBP and the AMD graphics card, which you'll need to disable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last link provided by &lt;strong&gt;Peter Uithoven&lt;/strong&gt; (Update #9) here will help.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8177/black-screen-when-installing-os&quot;&gt;Black screen when installing OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8071" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-09T13:02:55.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10077" PostTypeId="2" ParentId="9795" CreationDate="2017-01-09T13:07:07.613" Score="1" Body="&lt;p&gt;I had this issue also and tried everything, including removing/purging appcenter, reinstalling, updating, upgrading, etc. but no suggestions that I found worked.&lt;/p&gt;&#xA;&lt;p&gt;Finally, I looked through as many logs as I could and tried:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get remove appcenter&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get purge packagekit&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;... as I had seen some errors thrown up regarding packagekit which seemed related.&lt;/p&gt;&#xA;&lt;p&gt;Rebooted. Then reinstalled packagekit and appcenter, and everything works again!&lt;/p&gt;&#xA;&lt;p&gt;Edit:  Interestingly, and sadly, this fix only lasted until my next reboot.  Then the problem is back.  This leads me to believe that for whatever reason, the problem might be related to appcenter's relationship with packagekit.&lt;/p&gt;&#xA;&lt;p&gt;I have replicated the fix by removing packagekit again, and reinstalling, which so far is lasting.&lt;/p&gt;&#xA;" OwnerUserId="8044" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-01-09T18:28:20.487" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10078" PostTypeId="2" ParentId="8177" CreationDate="2017-01-09T13:24:53.620" Score="0" Body="&lt;p&gt;I'd like to add to Peter's answer with my own experience:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed this link on Update #9 to install eOS 0.4 (Loki) alongside macOS Sierra. After installation, rEFInd was no longer showing and I went straight to black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve this, I pressed alt on boot, which showed me the regular macOS Boot Screen, to start up macOS, then reinstalled rEFInd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After rebooting, rEFInd greeted my again and I was able to boot elementaryOS without the need to change grub's options again, I assume that AMD drivers (or at least compatible ones) were installed along with Loki.&lt;/p&gt;&#xA;" OwnerUserId="8071" LastActivityDate="2017-01-09T13:24:53.620" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10079" PostTypeId="1" CreationDate="2017-01-09T15:02:17.173" Score="1" ViewCount="89" Body="&lt;p&gt;I would like to give VirtualBox priority over anything else running on my install of Elementary OS. Within VirtualBox, I have dedicated 4GB of ram and 4 CPU cores to my VM, however the VM is still &quot;laggy&quot; while in use. I would like to know if there is a way to either turn off as many services as possible when VirtualBox starts, or if there is a way to give VirtualBox an extremely high priority over anything else running on my computer. Thank you all for any help in advance.&lt;/p&gt;&#xA;" OwnerDisplayName="user8075" LastActivityDate="2017-01-13T06:35:49.157" Title="How to give a specific program more resources" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10081" PostTypeId="2" ParentId="8882" CreationDate="2017-01-09T18:08:42.110" Score="0" Body="&lt;pre&gt;&lt;code&gt;root@mahardika:~# ls -l /lib/modules/$(uname -r)/build&#xA;lrwxrwxrwx 1 root root 42 Des  8 08:33 /lib/modules/4.8.0-kali2-686-pae/build -&amp;gt; /usr/src/linux-headers-4.8.0-kali2-686-pae&#xA;&#xA;root@mahardika:~# lsusb&#xA;Bus 002 Device 005: ID 0930:0214 Toshiba Corp. &#xA;Bus 002 Device 004: ID 04f3:0235 Elan Microelectronics Corp. &#xA;*Bus 002 Device 003: ID 2357:0108*  *(need solution for this problem)*&#xA;Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 003: ID 10f1:1a2a Importek Laptop Integrated Webcam&#xA;Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8078" LastEditorUserId="26" LastEditDate="2017-01-10T07:50:56.153" LastActivityDate="2017-01-10T07:50:56.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10084" PostTypeId="2" ParentId="9839" CreationDate="2017-01-09T19:33:28.607" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=764653&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/show_bug.cgi?id=764653&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this should answer most questions.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2017-01-09T19:33:28.607" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10086" PostTypeId="2" ParentId="3451" CreationDate="2017-01-09T20:03:07.157" Score="-1" Body="&lt;p&gt;If you want you could check &lt;a href=&quot;https://itsfoss.com/things-to-do-after-installing-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these.&lt;/a&gt;&#xA;Section: 4. INSTALL ELEMENTARY TWEAKS IN ORDER TO INSTALL THEMES AND ICONS IN LOKI. For those on Loki, maybe it could be useful.&lt;/p&gt;&#xA;" OwnerUserId="8079" LastActivityDate="2017-01-09T20:03:07.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10087" PostTypeId="2" ParentId="10079" CreationDate="2017-01-09T20:31:36.803" Score="1" Body="&lt;p&gt;You could try to use System Monitor(install from AppCenter) for these. First open System Monitor from Applications, and go click on Processes, and find your VM process, depends on which VM one you using&#xA;&lt;a href=&quot;https://i.stack.imgur.com/FTRHl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FTRHl.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, right click and choose priority for process as you wish:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nVnBT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nVnBT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;So check it out:&lt;a href=&quot;https://i.stack.imgur.com/NaFXq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NaFXq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install it in AppCenter by typing ''gnome-system-monitor'':&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Fwl5m.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Fwl5m.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8079" LastEditorUserId="8079" LastEditDate="2017-01-13T06:35:49.157" LastActivityDate="2017-01-13T06:35:49.157" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10088" PostTypeId="2" ParentId="10072" CreationDate="2017-01-09T20:40:50.963" Score="2" Body="&lt;p&gt;I found on Canon's website link to drivers for your printer:&#xA;&lt;a href=&quot;http://www.canon-europe.com/support/consumer_products/products/fax__multifunctionals/laser/laserbase_mf_series/i-sensys_mf4010.aspx?type=drivers&amp;amp;language=EN&amp;amp;os=&quot; rel=&quot;nofollow noreferrer&quot;&gt;Drivers&lt;/a&gt;&#xA;Just select Linux 64bit and download. ;)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-09T20:40:50.963" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10091" PostTypeId="1" CreationDate="2017-01-10T01:17:08.857" Score="0" ViewCount="854" Body="&lt;p&gt;I'm running Loki on a spiffy system more or less without fail. There are a couple of little bugs but nothing that makes me want to jump immediately back to Ubuntu. Unfortunately, I have found a trouble spot that is making it difficult for me. VirtualBox is not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running 4.8.0-32-generic kernel, which I upgraded to as a result of issues I was having with Intel 8265 wifi card (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9874/intel-8265-doesnt-work-in-loki&quot;&gt;Intel 8265 doesn&amp;#39;t work in Loki&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error I get when trying to spin up a virtual disk, in this case FreeBSD is as follows: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please install virtualbox-dkms package and load the kernel module by executing&#xA;&#xA;'modprobe vboxdrv'&#xA;&#xA;as root. If it is available in your distribution, you should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.&#xA;&#xA;where: suplibOsInit what: 3 VERR_VM_DRIVER_NOT_INSTALLED (-1908) - The support driver is not installed. On linux, open returned ENOENT. &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I've tried some of the support noted on stack here for Elementary but none of it works.  Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3887/trouble-installing-virtualbox-on-freya-with-kernel-4-4-0&quot;&gt;Trouble installing Virtualbox on Freya with kernel 4.4.0&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6988/virtualbox-on-elementaryos&quot;&gt;VirtualBox on elementaryos&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7919" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-11T07:22:57.517" Title="VirtualBox Fail on Loki w/ Kernel 4.8" Tags="|kernel|virtualbox|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10092" PostTypeId="1" CreationDate="2017-01-10T09:42:32.630" Score="3" ViewCount="44022" Body="&lt;p&gt;I like to theme elementary OS loki but i can't find some icons, plank and wingpanel that is similar to OSX sierra. Where should i find it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS is beautiful by itself but i'd like to try out some new theme so if its ok, can anyone help me? Thanks&lt;/p&gt;&#xA;" OwnerUserId="8026" LastEditorUserId="16827" LastEditDate="2019-04-13T08:48:51.260" LastActivityDate="2019-04-13T08:48:51.260" Title="OSX Theme for elementary OS" Tags="|release-loki|themes|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10093" PostTypeId="1" CreationDate="2017-01-10T10:32:57.253" Score="0" ViewCount="2075" Body="&lt;p&gt;Good Morning everyone, how can i change the grub2 bootloader timeout? (direct command in terminal to change it to 0 sec) Also what are the other tips to make this boot faster?&lt;/p&gt;&#xA;" OwnerUserId="8026" LastEditorUserId="308" LastEditDate="2018-08-07T17:01:56.653" LastActivityDate="2020-02-22T23:37:27.177" Title="Ways to boot faster in elementary OS" Tags="|release-loki|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10094" PostTypeId="1" CreationDate="2017-01-10T12:21:16.937" Score="2" ViewCount="1423" Body="&lt;p&gt;Is there a way to make shortcuts work like in mac os x system wide?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would increase user base if user could stick to their accustomed way of working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary teaks is letting me change window layout to osx. Would be great to have something similar for shortcut behavior?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have been looking for something like this for a whole day without end. Under system settings-&gt; keyboard I can change the keys, but then it conflicts with browser behavior of Epiphany where super+t should open new tab, but Ctrl+t does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe best would be, to make a decision at set up or at sign in, where it asks me if I want to have a similar behavior than Mac os x or Windows?&lt;/p&gt;&#xA;" OwnerUserId="2621" LastActivityDate="2017-01-10T15:58:56.870" Title="shortcuts mac osx" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="1" ClosedDate="2017-02-19T20:46:24.463" ContentLicense="CC BY-SA 3.0" />
  <row Id="10095" PostTypeId="1" CreationDate="2017-01-10T14:18:56.587" Score="1" ViewCount="826" Body="&lt;p&gt;How can I install elementary OS Loki alongside Ubuntu 16.10? I tried the ppa, but keep getting the error message: E: Unable to locate package elementary-desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-MD&lt;/p&gt;&#xA;" OwnerUserId="6268" LastEditorUserId="308" LastEditDate="2018-08-07T17:06:19.420" LastActivityDate="2018-08-07T17:06:40.070" Title="Installing elementary OS alongside Ubuntu 16.10" Tags="|system-installation|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10096" PostTypeId="1" CreationDate="2017-01-10T15:35:28.840" Score="1" ViewCount="75" Body="&lt;p&gt;When I use multitasking view in elementary loki (I have two monitors but happens also when using one), very often the background is corrupted:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3ogNS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3ogNS.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix this?&lt;/p&gt;&#xA;" OwnerUserId="2424" LastActivityDate="2017-01-10T15:35:28.840" Title="vista multitasking background corrupted in loki" Tags="|release-loki|multitasking-view|" AnswerCount="0" CommentCount="0" ClosedDate="2018-02-09T23:51:51.640" ContentLicense="CC BY-SA 3.0" />
  <row Id="10097" PostTypeId="2" ParentId="10094" CreationDate="2017-01-10T15:58:56.870" Score="-1" Body="&lt;p&gt;Go to &lt;code&gt;System Settings&lt;/code&gt;and choose &lt;code&gt;Keyboard&lt;/code&gt;.&#xA;You'll there all keyboards that you have.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the + to add new keyboard.&#xA;Choose language (I checked it for &lt;code&gt;English US&lt;/code&gt; and &lt;code&gt;English UK&lt;/code&gt;, so I think that there may be a problem with some other languages, but you need to check it out)&#xA;Choose layout &lt;code&gt;English(Macintosh)&lt;/code&gt;.&#xA;Add it and set as your primary keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you should have your keyboard layout set to the same as Apple offers. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-10T15:58:56.870" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10098" PostTypeId="2" ParentId="10060" CreationDate="2017-01-10T16:07:15.707" Score="1" Body="&lt;p&gt;Just looking at the screenshot, my best guess is that you've unknowingly upgraded your system to a newer version of Gtk+ that is incompatible with the elementary stylesheet. This makes Builder work, but it might cause issues with other apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check which version of Gtk+ you have installed, you can run the Terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-cache policy libgtk-3-0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should see some output like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libgtk-3-0:&#xA;  Installed: 3.18.9-1ubuntu3.1&#xA;  Candidate: 3.18.9-1ubuntu3.1&#xA;  Version table:&#xA; *** 3.18.9-1ubuntu3.1 500&#xA;        500 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     3.18.9-1ubuntu3 500&#xA;        500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This tells me that I have version &lt;code&gt;3.18.9&lt;/code&gt; installed. This is the original version that ships with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have a newer version of Gtk+ (like &lt;code&gt;3.20&lt;/code&gt;), you can either try to manually edit the stylesheet to fix issues yourself, switch to a stylesheet that supports whatever version of Gtk+ you've upgraded to, or try downgrading Gtk+ to the original version shipped with elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-01-10T16:07:15.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10099" PostTypeId="2" ParentId="10095" CreationDate="2017-01-10T16:07:21.097" Score="3" Body="&lt;p&gt;Just download iso from &lt;a href=&quot;http://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS&lt;/a&gt; and make bootable USB or CD.&#xA;Boot your computer from USB/CD and choose install elementary OS. &#xA;The you'll have an option to install elementary OS alongside other systems. Choose it and the you'll have a simple hard drive manager to make some space for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, follow installing instructions on screen. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastEditorUserId="308" LastEditDate="2018-08-07T17:06:40.070" LastActivityDate="2018-08-07T17:06:40.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10100" PostTypeId="2" ParentId="10093" CreationDate="2017-01-10T16:17:37.863" Score="1" Body="&lt;p&gt;Open with your favorite text editor &lt;code&gt;/etc/default/grub&lt;/code&gt; in &lt;code&gt;sudo&lt;/code&gt; mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll see:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/7wEUB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7wEUB.png&quot; alt=&quot;/etc/default.grub&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_TIMEOUT=10&lt;/code&gt; stands for grub timeout. Change it to your desired value and save. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to change sth more in grub then you have it here too ;)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-10T16:17:37.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10101" PostTypeId="1" CreationDate="2017-01-10T17:30:54.523" Score="1" ViewCount="226" Body="&lt;p&gt;I'd like to remap Command+s to save files in Atom, but I can't figure out where to disable the workspace overview feature that's already mapped to it. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="7957" LastActivityDate="2017-03-10T13:13:42.820" Title="Remap Workspace Overview shortcut (Command+S)" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-01T21:06:10.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="10102" PostTypeId="2" ParentId="10092" CreationDate="2017-01-10T17:51:08.590" Score="0" Body="&lt;p&gt;It seems that this youtube tutorial covers exactly what you want :)&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=Yfq_mQc8W_4&quot; rel=&quot;nofollow noreferrer&quot;&gt;TUTORIAL&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-10T17:51:08.590" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="10104" PostTypeId="2" ParentId="10091" CreationDate="2017-01-10T21:36:13.217" Score="2" Body="&lt;p&gt;This is what works for me (keeping secure boot enabled), but you will need to do it every time the kernel is updated:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1. Create signing keys&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;openssl req -new -x509 -newkey rsa:2048 -keyout MOK.priv -outform DER -out MOK.der -nodes -days 36500 -subj &quot;/CN=Descriptive name/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2.Sign the module (vboxdrv for this example)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /usr/src/linux-headers-$(uname -r)/scripts/sign-file sha256 ./MOK.priv ./MOK.der $(modinfo -n vboxdrv)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3. Register the keys to Secure Boot&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mokutil --import MOK.der&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Supply a password for later use after reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4. Reboot&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and follow instructions to Enroll MOK (Machine Owner Key). Here's a &lt;a href=&quot;https://sourceware.org/systemtap/wiki/SecureBoot&quot; rel=&quot;nofollow noreferrer&quot;&gt;sample with pictures&lt;/a&gt;. The system will reboot one more time. After the reboot, you may also need to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe vboxdrv &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to load the module.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SOURCE: &lt;a href=&quot;https://askubuntu.com/questions/760671/could-not-load-vboxdrv-after-upgrade-to-ubuntu-16-04-and-i-want-to-keep-secur&quot;&gt;https://askubuntu.com/questions/760671/could-not-load-vboxdrv-after-upgrade-to-ubuntu-16-04-and-i-want-to-keep-secur&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5910" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-01-10T21:36:13.217" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10106" PostTypeId="1" AcceptedAnswerId="10128" CreationDate="2017-01-10T22:48:40.703" Score="0" ViewCount="2380" Body="&lt;p&gt;and thanks for reading my question.&#xA;(Before posting I checked many other questions on this forum, as well on other websites.)&#xA;Recently I booted a live elementary OS Loki image on an old laptop to try the OS out and I decided to install it.&#xA;Before installing, my display wasn't detected but the resolution was automatically set 1280*720, which is the ideal resolution for my screen.&#xA;However, since I installed the OS the default resolution became 640*480 (4:3) and the display remains undetected.&#xA;I cannot change it using the provided GUI (System Settings&gt;Display), and I also tried to change it by using xrandr on the terminal but I found this quest to be fruitless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought it could be a problem with my old laptop's graphics driver (Silicon Integrated Systems), since it appears it's support for linux has long been discontinued, and I also tried various methods for fixing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, it still puzzles me how everything (resolution-wise) worked perfectly before the install. I even copied the kernel drives once from the live ISO image to my HDD in hopes the required drivers/the method through which the resolution was working would pass on to my installation...but that didn't work either (had to reinstall everything afterwards).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was hoping there was a way to reproduce the same effects I have when I boot from the live USB to when I boot from the HDD, if more advanced things such as getting the OS to recognize my screen don't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you know of a possible solution, please let me know. &#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="8089" LastActivityDate="2017-05-05T13:47:06.513" Title="Installing messes up resolution" Tags="|display|graphic-drivers|graphics|resolution|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10107" PostTypeId="1" AcceptedAnswerId="10108" CreationDate="2017-01-11T01:11:05.783" Score="0" ViewCount="441" Body="&lt;p&gt;I'd like to install again default photo application of elementary os because i have deleted it, i tried to search it in application center but it doesn't show there. What command should i use to install it?&lt;/p&gt;&#xA;" OwnerUserId="8026" LastActivityDate="2017-01-11T07:18:44.887" Title="How to install default photo app?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10108" PostTypeId="2" ParentId="10107" CreationDate="2017-01-11T07:18:44.887" Score="1" Body="&lt;p&gt;Try &lt;code&gt;sudo apt-get install pantheon-photos&lt;/code&gt; :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-11T07:18:44.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10109" PostTypeId="2" ParentId="10091" CreationDate="2017-01-11T07:22:57.517" Score="0" Body="&lt;p&gt;I had that problem and I solved it with downloading VirtualBox from Oracle website and installing from dpkg. :) (Of course a before I purged everything with virtualbox).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a problem with multiple kernels - it came up after updating VirtualBox to newest version.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-11T07:22:57.517" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10110" PostTypeId="2" ParentId="776" CreationDate="2017-01-11T08:25:23.707" Score="0" Body="&lt;p&gt;Simple like Ubuntu 16.04! See my part of &lt;code&gt;pxelinux.cfg&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;MENU BEGIN elementaryos-0.4&#xA;    MENU background elementaryos-0.4/splash.png&#xA;    MENU TITLE ElementaryOS 0.4&#xA;    MENU LABEL ^* ElementaryOS 0.4&#xA;&#xA;            LABEL back&#xA;            MENU LABEL ^&amp;lt;= Back...&#xA;            MENU EXIT&#xA;&#xA;            LABEL live-boot-ElementaryOS-0.4-desktop-amd64&#xA;                    MENU LABEL ^* ElementaryOS 0.4 Desktop amd64&#xA;                    KERNEL elementaryos-0.4/casper/vmlinuz&#xA;                    APPEND vga=normal boot=casper netboot=nfs nfsroot=nfs.domain.ltd:/opt/tftpboot/elementaryos-0.4 initrd=elementaryos-0.4/casper/initrd.lz ip=dhcp locale=en_US --&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Requirements:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;dnsmasq (dhcp+tftp)&lt;/li&gt;&#xA;&lt;li&gt;nfs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Download &lt;code&gt;iso&lt;/code&gt;, extract &lt;code&gt;casper&lt;/code&gt; directory to &lt;code&gt;tftp&lt;/code&gt; &amp;amp; &lt;code&gt;nfs&lt;/code&gt;, profit!&lt;/p&gt;&#xA;" OwnerUserId="8093" LastActivityDate="2017-01-11T08:25:23.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10112" PostTypeId="2" ParentId="2071" CreationDate="2017-01-11T11:54:24.160" Score="0" Body="&lt;p&gt;I tried this fix but not really working for me (Elementary 0.4 Loki with &quot;dark&quot; setting and Evolution 3.18.5.2).&#xA;I edited both the gtk.css and gtk-dark.css with the suggested changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Plain text mail in the preview and composer is shown with a dark grey background and light grey text.  I'd be happy if the text was white to give more contrast.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Strangely, when the Evolution window is not selected, the text changes to black on a white background.&#xA;I'm not sure if I have the right file to edit?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's &lt;code&gt;~/.themes/elementary/gtk-3.0/gtk.css&lt;/code&gt;&#xA;and  &lt;code&gt;~/.themes/elementary/gtk-3.0/gtk-dark.css&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8096" LastActivityDate="2017-01-11T11:54:24.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10114" PostTypeId="1" AcceptedAnswerId="10115" CreationDate="2017-01-11T13:05:16.950" Score="2" ViewCount="247" Body="&lt;p&gt;I'm running Elementary OS Loki, and recently I've decided to change default file manager to Nemo. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing and setting it as default in &lt;em&gt;System settings &gt; Applications &gt; Default applications&lt;/em&gt;, on each launch of Nemo (either from &lt;em&gt;.desktop&lt;/em&gt; or CLI) I have a window named &quot;Desktop&quot; which duplicates my original desktop, but isn't responding to anything or closing. The only way is to shut down Nemo, and then &lt;code&gt;xkill&lt;/code&gt; the window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have read before that it is kind of connected to Nautilus and desktop icons, but I have neither Nautilus nor enabled icons in my OS.&#xA;Is there a way to fix this, or should I look for another file manager?&lt;/p&gt;&#xA;" OwnerUserId="7699" LastEditorUserId="7699" LastEditDate="2017-02-11T13:04:04.550" LastActivityDate="2017-02-11T13:24:04.223" Title="Desktop showing as a window above original" Tags="|release-loki|desktop|files|nautilus|show-desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10115" PostTypeId="2" ParentId="10114" CreationDate="2017-01-11T16:27:00.263" Score="1" Body="&lt;p&gt;Figured out the problem, the command to hide this window is &lt;code&gt;gsettings set org.nemo.desktop show-desktop-icons false&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;EDIT&lt;/em&gt;: And to fix the desktop instead of disabling it, I just followed this guide and everything works: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3841/7699&quot;&gt;https://elementaryos.stackexchange.com/a/3841/7699&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7699" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-11T13:24:04.223" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10116" PostTypeId="1" CreationDate="2017-01-11T17:29:31.957" Score="2" ViewCount="333" Body="&lt;p&gt;I cannot figure out how to disable the blinking cursor is Pantheon-Terminal (which I think is the same as Gnome-Terminal). I looked in dconf-editor, but did not see any variable that seemed to be about blinking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="8103" LastEditorUserId="5054" LastEditDate="2017-01-15T14:43:53.257" LastActivityDate="2017-03-16T16:23:36.567" Title="Disable Blinking cursor in Pantheon Terminal" Tags="|pantheon-terminal|gnome-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10118" PostTypeId="2" ParentId="7409" CreationDate="2017-01-11T21:19:30.690" Score="1" Body="&lt;p&gt;you might also want to try the following&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;at grub boot... hit e&lt;/li&gt;&#xA;&lt;li&gt;on the line with /vmlinuz ... &lt;/li&gt;&#xA;&lt;li&gt;try adding the option nomodeset towards the end of the line&lt;/li&gt;&#xA;&lt;li&gt;then boot &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have found that many display issues are &quot;fixed&quot; by this ... EXCEPT seens to not work with multi-monitor setup&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-01-11T21:19:30.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10119" PostTypeId="2" ParentId="10106" CreationDate="2017-01-11T21:28:47.637" Score="0" Body="&lt;p&gt;please try .... &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;at the grub boot &lt;/li&gt;&#xA;&lt;li&gt;add the option nomodeset&lt;/li&gt;&#xA;&lt;li&gt;then boot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-01-11T21:28:47.637" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10120" PostTypeId="2" ParentId="12155" CreationDate="2017-01-11T23:46:48.603" Score="13" Body="&lt;p&gt;A solution (or at least temporary workaround) proposed in the bug discussion&#xA;- &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt; - is to rename the file: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/xdg/autostart/at-spi-dbus-bus.desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to &lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/xdg/autostart/at-spi-dbus-bus.disabled&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This fixed it immediately for me.&lt;/p&gt;&#xA;" OwnerUserId="8044" LastActivityDate="2017-01-11T23:46:48.603" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10123" PostTypeId="1" CreationDate="2017-01-12T06:57:02.110" Score="3" ViewCount="3144" Body="&lt;p&gt;The wallpaper doesn't change when I set the wallpaper&#xA;I have tried in System Settings or by the command line &lt;code&gt;set-wallpaper&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go to &quot;Multitasking view&quot; the new wallpaper does show but switches back to the old one when I am in normal view.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I log out and log back in, it does update.&lt;/p&gt;&#xA;" OwnerUserId="8096" LastEditorUserId="578" LastEditDate="2017-01-24T21:19:20.690" LastActivityDate="2019-03-29T13:23:07.407" Title="Wallpaper not updating (Loki)" Tags="|release-loki|wallpaper|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10124" PostTypeId="2" ParentId="10123" CreationDate="2017-01-12T09:29:53.240" Score="4" Body="&lt;p&gt;You have to restart or at least reload &lt;code&gt;gala&lt;/code&gt; to change the wallpaper, for exemple you can type in a terminal window:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall -HUP gala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This might be related to a bug as well…&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-12T09:29:53.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10125" PostTypeId="2" ParentId="10116" CreationDate="2017-01-12T09:39:41.053" Score="2" Body="&lt;p&gt;Pantheon Terminal uses the VTE widget kit and can be customized via the dconf registry. You can turn off the blinking with dconf-editor under &lt;code&gt;org.gnome.desktop.interface&lt;/code&gt; or via the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set org.gnome.desktop.interface cursor-blink false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and turn back on with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set org.gnome.desktop.interface cursor-blink true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings reset org.gnome.desktop.interface cursor-blink&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can play with other settings to the cursor as well under &lt;code&gt;org.gnome.desktop.interface&lt;/code&gt; (&lt;code&gt;cursor-theme&lt;/code&gt;, &lt;code&gt;cursor-blink-time&lt;/code&gt;, &lt;code&gt;cursor-size&lt;/code&gt;, etc. keys).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-12T09:39:41.053" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10126" PostTypeId="2" ParentId="10048" CreationDate="2017-01-12T10:13:22.590" Score="4" Body="&lt;p&gt;There are some bugs for now, but I got it working with two-step authentication.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I cannot setup Google Calendars without installing Evolution. After my calendars got setup in Evolution, they did become visible in Maya (native calendar app) as well.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;There is often an offset of one day for your daily appointements (&lt;a href=&quot;https://bugs.launchpad.net/maya/+bug/1442188&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/maya/+bug/1442188&lt;/a&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Sorry, no clues for Apple Calendar.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-12T10:13:22.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10127" PostTypeId="2" ParentId="8026" CreationDate="2017-01-12T12:31:42.073" Score="4" Body="&lt;p&gt;There are two ways. &lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The first way is  build source code&#xA;&lt;a href=&quot;https://github.com/linuxdeepin/deepin-terminal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/linuxdeepin/deepin-terminal&lt;/a&gt;&#xA;&lt;br/&gt;&lt;/li&gt;&#xA;&lt;li&gt;The second way is add deepin  to sources list then &#xA;&lt;code&gt;sudo apt install deepin-terminal&lt;/code&gt;&#xA;&lt;a href=&quot;http://nekomiao.me/2016/08/10/ubuntu-1604-install-deepin-terminal/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://nekomiao.me/2016/08/10/ubuntu-1604-install-deepin-terminal/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="8109" LastEditorUserId="26" LastEditDate="2017-01-15T19:09:06.783" LastActivityDate="2017-01-15T19:09:06.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10128" PostTypeId="2" ParentId="10106" CreationDate="2017-01-12T14:46:18.907" Score="1" Body="&lt;p&gt;I finally find out how to correct this and I will leave it here for future reference for those who might be having similar issues.&#xA;I just followed the answer posted here &lt;a href=&quot;https://askubuntu.com/questions/455888/low-resolution-on-lubuntu-14-04-sis&quot;&gt;https://askubuntu.com/questions/455888/low-resolution-on-lubuntu-14-04-sis&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;force the machine to use the vesa driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a file /usr/share/X11/xorg.conf.d/use-vesa.conf with the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;Section &quot;Device&quot;&#xA;  Identifier &quot;Configured Video Device&quot;&#xA;  Driver &quot;vesa&quot;&#xA;EndSection&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And that's all. Reboot, and you should have your resolution.&quot;&lt;/p&gt;&#xA;" OwnerUserId="8089" LastEditorUserId="9603" LastEditDate="2017-05-05T13:47:06.513" LastActivityDate="2017-05-05T13:47:06.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10130" PostTypeId="1" CreationDate="2017-01-12T19:13:24.887" Score="2" ViewCount="426" Body="&lt;p&gt;In do not disturb mode, notifications don't appear but they &lt;strong&gt;do sound&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway to disable their sound too?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-01-13T08:30:07.597" Title="Is it possible to disable notifications sound on do not disturb mode?" Tags="|sound|notifications|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10133" PostTypeId="2" ParentId="10130" CreationDate="2017-01-13T08:30:07.597" Score="1" Body="&lt;p&gt;In &lt;em&gt;System Settings&gt;Notifications&lt;/em&gt; you can set if notifications play sound. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-13T08:30:07.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10134" PostTypeId="1" CreationDate="2017-01-13T08:53:20.020" Score="2" ViewCount="1097" Body="&lt;p&gt;Mozc works properly as expected but however i can't manage to set Russian works as same from fcitx-configtool.&#xA;When i input, there's only English alphabet instead of Russian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;" OwnerUserId="8118" LastActivityDate="2019-01-05T11:00:55.170" Title="How to get Russian works in Fcitx?" Tags="|fcitx|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10137" PostTypeId="2" ParentId="8131" CreationDate="2017-01-13T14:28:55.537" Score="1" Body="&lt;p&gt;The automated fix as shared in below link made all the media keys work in my installation of Loki on C720.  There are a few additional fixes included, you might want to adjust the script where you find necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.fascinatingcaptain.com/blog/automate-chromebook-fixes-for-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.fascinatingcaptain.com/blog/automate-chromebook-fixes-for-linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4653" LastActivityDate="2017-01-13T14:28:55.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10138" PostTypeId="1" AcceptedAnswerId="10148" CreationDate="2017-01-13T17:21:51.153" Score="1" ViewCount="446" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WmbN4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WmbN4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to restore the default shortcut key binding?&#xA;I messed it up!&lt;/p&gt;&#xA;" OwnerUserId="703" LastActivityDate="2017-01-14T22:29:56.037" Title="How to restore the default short-cut key binding?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10139" PostTypeId="1" AcceptedAnswerId="10147" CreationDate="2017-01-13T17:23:13.273" Score="0" ViewCount="320" Body="&lt;p&gt;There are no icons in Files' context menus in Loki, and &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1923/170&quot;&gt;this is normal&lt;/a&gt; behavior.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing PCManFM those icons are still missing, but they can be enabled as explained &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8773/170&quot;&gt;here&lt;/a&gt;. The change doesn't affect Pantheon Files though, and I would like to have that, because my menus contain multiple entries that are much easier to spot and select when they have icons, as they do in other desktop environments.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IM17W.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IM17W.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y3PPF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y3PPF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to trigger that change for the default file manager too?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-14T11:40:30.980" Title="Enabling context menu icons in Pantheon Files?" Tags="|release-loki|pantheon-files|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10141" PostTypeId="1" CreationDate="2017-01-14T04:39:40.007" Score="1" ViewCount="107" Body="&lt;p&gt;Can I have on my mac Sierra computer both runing - mac sierra and elementary?&#xA;How to install elementary on my mac safely - without deleting anything?&#xA;I want to be able to enter sierra or elementary.&#xA;Is that possible?&#xA;Dual boot?!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THANK YOU&lt;/p&gt;&#xA;" OwnerUserId="8125" LastActivityDate="2017-02-13T09:56:59.710" Title="Can I have on my mac Sierra computer both runing - mac sierra and elementary?" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10142" PostTypeId="1" CreationDate="2017-01-14T09:41:13.167" Score="1" ViewCount="302" Body="&lt;p&gt;I want mac's  gestures feature . I know my touchpad is multitouch supported but I kind of have problems using touchegg . So pls tell me which software or which way can I use multitouch gestures for touchpad just like mac&lt;/p&gt;&#xA;" OwnerUserId="7710" LastActivityDate="2017-01-14T09:41:13.167" Title="How to get mac like gestures in loki?" Tags="|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10143" PostTypeId="2" ParentId="10141" CreationDate="2017-01-14T09:44:02.683" Score="2" Body="&lt;p&gt;Yes, of course :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just download elementary and make it bootable on USB or CD.&#xA;Then boot it and click install.&#xA;Following the instructions, you'll come to step where you can decide if you want to erase whole computer and has only elementary or to istall it alongside other system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Choose installation alongside other system and you'll see a simple partition manager, where you need to assign some disk space for elementary. Assign as much as you want and complete the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Later when you'll start your computer you'll see grub menu where you can choose which system you want to start. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. If you don't see grub menu then you need to enter BIOS and choose default bootloader. But if you'll experiece that problem then write and we'll try to figure it out.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-14T09:44:02.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10145" PostTypeId="2" ParentId="7777" CreationDate="2017-01-14T10:24:20.443" Score="4" Body="&lt;p&gt;Open the Applications menu in the search field type &lt;code&gt;plank --preferences&lt;/code&gt; and then select Theme -&gt; Transparent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HSZNj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HSZNj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8127" LastEditorUserId="5722" LastEditDate="2017-01-31T18:12:41.510" LastActivityDate="2017-01-31T18:12:41.510" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10146" PostTypeId="1" CreationDate="2017-01-14T11:28:00.680" Score="1" ViewCount="20" Body="&lt;p&gt;In the app-center, I see I have an app &quot;details&quot; (gnome-program). I can't see it in my menu and neither if I type it in the search field.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had a similar problem with gnome contacts: I installed it, but could only open it from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;" OwnerUserId="8126" LastActivityDate="2017-01-14T11:28:00.680" Title="I can't find the program &quot;details&quot;" Tags="|menu|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10147" PostTypeId="2" ParentId="10139" CreationDate="2017-01-14T11:40:30.980" Score="2" Body="&lt;p&gt;This would need changing Files code so cannot be done by the user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an existing bug report about icons in context menu - #1542709 - so this feature may be implemented in future.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-01-14T11:40:30.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10148" PostTypeId="2" ParentId="10138" CreationDate="2017-01-14T13:40:27.863" Score="1" Body="&lt;p&gt;I have found the answer, just install dconf-editor, open it and search media-keys&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="578" LastEditDate="2017-01-14T22:29:56.037" LastActivityDate="2017-01-14T22:29:56.037" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10149" PostTypeId="1" CreationDate="2017-01-14T14:21:20.947" Score="0" ViewCount="264" Body="&lt;p&gt;I have checked all the solutions mentioned on this website but none worked for me. WIFI stays disabled. Pls. find attached below picture for the reference. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OiPhA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OiPhA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8130" LastActivityDate="2024-03-19T08:03:50.490" Title="Wifi stays Disable in HP X360 i5" Tags="|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10150" PostTypeId="2" ParentId="4294" CreationDate="2017-01-14T19:39:45.617" Score="-2" Body="&lt;p&gt;I could fix it with the steps of  Nesi and Suici Doga:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Run `sudo scratch-text-editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/usr/share/software-center/softwarecenter/distro/&lt;strong&gt;init&lt;/strong&gt;.py`&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to line 169&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change &lt;code&gt;distro_id= distro_info['ID']&quot;&lt;/code&gt; to &lt;strong&gt;&lt;code&gt;distro_id='ubuntu'&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Before edit: &lt;code&gt;distro_id= distro_info['ID']&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;After edit: &lt;strong&gt;&lt;code&gt;distro_id='ubuntu'&lt;/code&gt;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in terminal: &lt;code&gt;sudo update-software-center&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="8134" LastActivityDate="2017-01-14T19:39:45.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10151" PostTypeId="1" CreationDate="2017-01-14T21:04:14.117" Score="1" ViewCount="258" Body="&lt;p&gt;I've setup my drive on time capsule and can successfully mount it manually with the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  mkdir ~/tcdrive&#xA;  sudo mount.cifs //MyTimeCapsule.local/Data ~/tcdrive/ -o username=myusername,sec=ntlm,password=mypassword&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, ideally I'd like able to access / browse to this network shared drive via the Pantheon FileManager directly (without manually mounting first using the above).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried connecting to it using &quot;Connect to Server&quot; but can't seem to find a working set options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm also unable to figure out how to do this Nautilus FileManager (which I setup so I could have desktop icons), so a solution for either Pantheon or Nautilus would work!&lt;/p&gt;&#xA;" OwnerUserId="7948" LastEditorUserId="7948" LastEditDate="2017-01-14T22:36:05.457" LastActivityDate="2018-02-11T08:54:17.050" Title="How to use Pantheon File Manager to connect to Apple Time Capsule drive" Tags="|pantheon-files|networking|files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10152" PostTypeId="2" ParentId="10149" CreationDate="2017-01-14T21:44:05.573" Score="0" Body="&lt;p&gt;In terminal &lt;code&gt;echo &quot;blacklist acer-wmi&quot; | sudo tee /etc/modprobe.d/acer-wmi.conf&lt;/code&gt;&#xA;Reboot and wireless should function.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason some HP laptops will load the acer-wmi module and have issues with a soft block on an acer-wireless device&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-01-14T21:44:05.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10153" PostTypeId="1" CreationDate="2017-01-14T22:06:02.630" Score="1" ViewCount="138" Body="&lt;p&gt;I would like to run Elementary on my MacBook Air via VM such as Virtualbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can this be done, and where should I look for detailed assistance ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="8135" LastActivityDate="2017-01-16T22:56:48.643" Title="Can one run Elementary within VM" Tags="|dual-boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10154" PostTypeId="2" ParentId="10153" CreationDate="2017-01-14T22:20:18.667" Score="1" Body="&lt;p&gt;Installing VirtualBox is pretty easy: just follow the instructions on the program's website &lt;a href=&quot;https://www.virtualbox.org/wiki/Mac%20OS%20X%20build%20instructions&quot; rel=&quot;nofollow noreferrer&quot;&gt;VirtualBoxForMacOS&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are asking how to install elementary is in VirtualBox:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download the ISO from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run VirtualBox and choose New.&lt;/li&gt;&#xA;&lt;li&gt;Select your system name and type of system (I usually choose Linux x64).&lt;/li&gt;&#xA;&lt;li&gt;You see the creation wizard for the virtual machine. If you just need a default machine then go next, next, next and maybe you will want to just adjust the amount of RAM and the size of the virtual hard disk.&lt;/li&gt;&#xA;&lt;li&gt;When finished, highlight your new VM and choose Storage from menu, then click icon with CD and choose .iso file.&lt;/li&gt;&#xA;&lt;li&gt;Run the VM.&lt;/li&gt;&#xA;&lt;li&gt;You are now in the system installation. :)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7532" LastEditorDisplayName="user8140" LastEditDate="2017-01-15T11:21:29.553" LastActivityDate="2017-01-15T11:21:29.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10155" PostTypeId="2" ParentId="10149" CreationDate="2017-01-14T22:39:51.777" Score="0" Body="&lt;p&gt;I own the same computer and I can confirm the same wi-fi issue; the previous answer fix it;&#xA;you can also fix it by typing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rmmod acer_wmi&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/modprobe.d/blacklist.conf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;add &lt;code&gt;blacklist acer_wmi&lt;/code&gt; at the bottom&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hit ctr^o + enter to save; ctr^x to exit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reboot, done. &lt;/p&gt;&#xA;" OwnerDisplayName="user8136" LastActivityDate="2017-01-14T22:39:51.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10161" PostTypeId="2" ParentId="10123" CreationDate="2017-01-15T10:35:35.323" Score="0" Body="&lt;p&gt;I'm not sure what I changed, but this started working.  I have been altering the NVIDIA settings, so that may have something to do with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, it's working as expected now without having to restart gala.&#xA;I'll report again if I find what the bug was&lt;/p&gt;&#xA;" OwnerUserId="8096" LastActivityDate="2017-01-15T10:35:35.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10164" PostTypeId="2" ParentId="1935" CreationDate="2017-01-15T12:43:12.990" Score="-1" Body="&lt;p&gt;well here is a solution you might try,get a hdmi adapter and convert the hdmi out on your pc to a VGA signal then select VGA input on the tv and everything should be fine&lt;/p&gt;&#xA;" OwnerUserId="6599" LastActivityDate="2017-01-15T12:43:12.990" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10166" PostTypeId="2" ParentId="9271" CreationDate="2017-01-15T13:00:26.930" Score="1" Body="&lt;p&gt;instead of selecting from System Settings, go to your pictures folder,right click and select 'set as desktop background'that should work nicely &lt;/p&gt;&#xA;" OwnerUserId="6599" LastActivityDate="2017-01-15T13:00:26.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10167" PostTypeId="2" ParentId="1860" CreationDate="2017-01-15T13:26:11.217" Score="2" Body="&lt;p&gt;A recent article claims a bug exists that allows Samba to max out 100% cpu usage, if you re not using Samba or any of it's features change the permissions so it wont start on it's own.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 744 /usr/lib/gvfs/gvfsd-smb-browse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6599" LastEditorUserId="16827" LastEditDate="2019-04-20T05:31:25.280" LastActivityDate="2019-04-20T05:31:25.280" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10168" PostTypeId="2" ParentId="1935" CreationDate="2017-01-15T13:41:08.247" Score="2" Body="&lt;p&gt;I had that problem too. I solved it that way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;code&gt;/boot/&lt;/code&gt;open configuration file and uncomment &lt;code&gt;disable_overscan=1&lt;/code&gt; (if this parameter is 0 then set it to 1).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below you have &lt;code&gt;overscan_left&lt;/code&gt;, &lt;code&gt;overscan_right&lt;/code&gt;, &lt;code&gt;overscan_top&lt;/code&gt; and &lt;code&gt;overscan_bottom&lt;/code&gt;. Changing values of these parameters you can adjust your display to TV. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After setting everything, save and close document (you need to be in sudo mode) and restart your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can see if system is displayed properly. If not then try changing values for left, right, top and bottom parameters. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-15T13:41:08.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10170" PostTypeId="2" ParentId="4378" CreationDate="2017-01-15T14:03:25.727" Score="1" Body="&lt;p&gt;Try System Settings/Network/Wireless/click on your wireless network.&#xA;go to Settings/wi-fi security/ and double check that your password has been entered and spelled correctly,perhaps re-entering it and manually saving. &lt;/p&gt;&#xA;" OwnerUserId="6599" LastActivityDate="2017-01-15T14:03:25.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10172" PostTypeId="2" ParentId="10153" CreationDate="2017-01-15T16:17:44.790" Score="0" Body="&lt;p&gt;&lt;em&gt;EDITED&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You don't even need to do all that building from source and installing macports, just snag the binary from &lt;a href=&quot;https://www.virtualbox.org/wiki/Downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.virtualbox.org/wiki/Downloads&lt;/a&gt; then install and run, I would recommend grabbing the extension pack for it as well.&lt;/p&gt;&#xA;" OwnerUserId="8145" LastEditorUserId="8145" LastEditDate="2017-01-16T22:56:48.643" LastActivityDate="2017-01-16T22:56:48.643" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10173" PostTypeId="1" CreationDate="2017-01-15T18:07:09.263" Score="0" ViewCount="1527" Body="&lt;p&gt;So my friend got a Odys Trendbook 14 Pro notebook really cheap. He planned to install Elementary OS on it. But now we come to the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He cant boot from his USB he made with rufus. The only option in the bios he has is secure boot and that is disabled. no settings for fast boot or legacy/csm. If he takes the usb as only boot device uefi shell starts.&#xA;You know anyway to get around that? i heared that ms leaked something to bypass uefi but no idea how that works exactly.&#xA;Edit: Yes we tried normal ubuntu too Here some pics of the bios: &lt;a href=&quot;https://i.stack.imgur.com/PRb8O.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/PRb8O.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I never had a problem like that and i would love to see a way to fix it thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="8146" LastActivityDate="2017-02-15T02:43:47.867" Title="Help me installing Linux on a UEFI only Notebook" Tags="|boot|uefi|efi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10174" PostTypeId="1" CreationDate="2017-01-15T18:37:41.647" Score="0" ViewCount="184" Body="&lt;p&gt;I am having difficultly trying to install Loki on my MacBook circa 2007. Firstly following the instructions and using Etcher to burn &lt;em&gt;elementaryos-0.4-stable-amd64.20160921.iso&lt;/em&gt; I created a USB stick that booted fine on my mid 2012 MacBook Pro but not on the 2007 MacBook.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this blog post &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2266424&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2266424&lt;/a&gt;, and following its instructions of copying bootIA32.efi from Mac Linux USB loader I was able to boot off the USB stick. However when I try installing it always errors with this&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;grub-install /dev/sda' failed. This is a fatal error&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I've tried about half a dozen times and enabled the internet during installation to no avail.&lt;/p&gt;&#xA;" OwnerUserId="8143" LastActivityDate="2023-02-08T23:37:25.437" Title="Difficulties creating USB stick that boots and installs on MacBook circa 2007" Tags="|grub|macbook|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10176" PostTypeId="1" AcceptedAnswerId="10260" CreationDate="2017-01-16T00:45:26.343" Score="4" ViewCount="4329" Body="&lt;p&gt;In the macOS the all the four window corners are rounded, like the image below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BgI2p.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BgI2p.jpg&quot; alt=&quot;Safari on macOS Sierra with window corners rounded&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But in eOS, the windows corners are usually like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GV7MS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GV7MS.png&quot; alt=&quot;Files app in eOS with only two of the corners rounded&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here only two of the four corners of the window are rounded. I don't know if it is just me, but the windows rounded feel more comfortable to my eyes, like the screen corners are.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched a bit and did not found any way to do or enable windows to be rendered like this. I saw that Mail app renders it's welcome screen with corners rounded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's any way to enable this? If no, what is the best approach to propose this to the design team?&lt;/p&gt;&#xA;" OwnerUserId="8129" LastEditorUserId="8129" LastEditDate="2017-01-16T00:52:41.563" LastActivityDate="2017-01-20T06:05:36.417" Title="How do I make all window corners to be rounded?" Tags="|themes|gala|design|macintosh|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10178" PostTypeId="2" ParentId="10173" CreationDate="2017-01-16T02:12:32.690" Score="1" Body="&lt;p&gt;I've looked into Rufus documentation and found this:&lt;/p&gt;&#xA;&lt;h2&gt;I used an UEFI bootable ISO based on grub, but all I get is the grub prompt&lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;This can happen if you chose GPT partition scheme for UEFI computer in the Partition scheme dropdown, and part_gpt module was not included in grub when running grub-mkimage (See here).&lt;/p&gt;&#xA;&lt;p&gt;In this case, you need to select MBR partition scheme for UEFI computer, and the grub.efi boot should work as expected.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;You can find more &lt;a href=&quot;https://github.com/pbatard/rufus/wiki/FAQ#I_used_an_UEFI_bootable_ISO_based_on_grub_but_all_I_get_is_the_grub_prompt&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Also, I've recently installed eOS Loki on my laptop with UEFI and Secure Boot active. I have created my liveUSB stick using another Linux distribution and the &lt;code&gt;dd&lt;/code&gt; command.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The following should work on any Linux distribution&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Check your disks and what device is your pen drive using &lt;code&gt;lsblk&lt;/code&gt; command.&lt;/p&gt;&#xA;&lt;p&gt;You should see something like this:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FhN7j.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FhN7j.png&quot; alt=&quot;The 'lsblk' command in eOS terminal&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;In my case, &lt;code&gt;/dev/sdb&lt;/code&gt; disk with 14.9G is my USB stick.&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now, all you have to do is use the &lt;code&gt;dd&lt;/code&gt; magic.&lt;/p&gt;&#xA;&lt;p&gt;Use &lt;code&gt;sudo dd if=/path-to-elementary.iso of=/dev/sdX status=progress&lt;/code&gt; - where X is your disk.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Note: the &lt;code&gt;status=progress&lt;/code&gt; argument is not required, but it provides useful information about the progress of the liveUSB creation.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;In the end you will be able to boot the elementary OS in a UEFI PC with Secure Boot enabled.&lt;/p&gt;&#xA;" OwnerUserId="8129" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-01-16T02:12:32.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10179" PostTypeId="1" CreationDate="2017-01-16T03:34:10.133" Score="0" ViewCount="586" Body="&lt;p&gt;I installed Loki over an older installation (prior version of Elementary) where I only saved my home partition (everything else was wiped clean).  What is the best way to reset the desktop so it is back to the default?  I tried copying in the files from /etc/skel, but that didn't seem to work (menu sort of appeared but standard apps in the launch bar did not).&lt;/p&gt;&#xA;" OwnerUserId="8150" LastActivityDate="2017-01-16T08:40:27.653" Title="Resetting Menu / Desktop" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-22T23:37:34.517" ContentLicense="CC BY-SA 3.0" />
  <row Id="10181" PostTypeId="2" ParentId="10174" CreationDate="2017-01-16T04:55:50.767" Score="1" Body="&lt;p&gt;I had this very problem installing on a similar Macbook. For me, it seems that the problem had to do with the way I created the USB stick. I had been following similar instructions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ultimately, I got it to work when I setup the USB stick using &lt;a href=&quot;http://www.etcher.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Etcher&lt;/a&gt;, as described in &lt;a href=&quot;https://elementary.io/docs/installation#install-on-macos&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Elementary OS setup instructions&lt;/a&gt; on their site.&lt;/p&gt;&#xA;" OwnerUserId="7921" LastActivityDate="2017-01-16T04:55:50.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10182" PostTypeId="2" ParentId="10179" CreationDate="2017-01-16T08:40:27.653" Score="-2" Body="&lt;p&gt;Do you want to reset only desktop settings or all programs settings?(including desktop)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to reset all settings run this command and reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf .*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Be sure to run this in your home directory&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to reset only desktop you should delete only some of this files, but i do not know which, you should wait a reply from a developer.&lt;/p&gt;&#xA;" OwnerUserId="7909" LastActivityDate="2017-01-16T08:40:27.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10183" PostTypeId="2" ParentId="6763" CreationDate="2017-01-16T13:12:04.757" Score="1" Body="&lt;p&gt;For me it was the package &quot;libsane&quot; missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing it, it started working on Jessie (using masterpdfeditor4 and installing &quot;qt5-default&quot; before masterpdfeditor4 .deb file via gdebi).&lt;/p&gt;&#xA;" OwnerUserId="8154" LastActivityDate="2017-01-16T13:12:04.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10184" PostTypeId="1" CreationDate="2017-01-16T14:44:26.120" Score="0" ViewCount="209" Body="&lt;p&gt;is it possible to align the clock on login screen / DM to centre or disable it altogether?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The suboptimal placement is driving me nuts :)&lt;/p&gt;&#xA;" OwnerUserId="8156" LastEditorUserId="5722" LastEditDate="2017-01-29T18:07:01.430" LastActivityDate="2019-04-20T11:02:05.427" Title="Center/disable clock on login screen" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10185" PostTypeId="1" CreationDate="2017-01-14T02:18:11.457" Score="0" ViewCount="92" Body="&lt;p&gt;After updating the graphics driver, I could not get into graphical mode. So I removed the nvidia and xserver packages, and now, when I run &lt;code&gt;apt-get -f install&lt;/code&gt;, I get these error messages:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sT6yB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sT6yB.jpg&quot; alt=&quot;Photograph of a screen, showing a text-only console, with kernel messages and APT error messages.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It is the &lt;strong&gt;Elementary OS Freya 0.4&lt;/strong&gt; x86_64. It all started when I wanted to install Unity 8, and later I &quot;installed&quot; package &lt;code&gt;nvidia-304&lt;/code&gt;, although I had installed &lt;code&gt;nvidia-340&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it does not matter now, because I do not have any of these packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to remove the &lt;code&gt;nvidia-prime&lt;/code&gt; package using these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /var/lib/dpkg/info/&amp;lt;packagename&amp;gt;.* /tmp/&#xA;sudo dpkg --removed --force-remove-reinstreq &amp;lt;packagename&amp;gt;&#xA;sudo apt-get remove &amp;lt;packagename&amp;gt;&#xA;sudo apt-get autoremove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But now I have a similar problem with a package &lt;code&gt;libc-bin&lt;/code&gt;, when I want to install anything, which no longer I can not remove:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GR6Dx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GR6Dx.jpg&quot; alt=&quot;Photograph of a screen, showing a text-only console, indicating several xorg-related packages not yet being configured, saying &amp;quot;Processing triggers for libc-bin&amp;quot; and concluding &amp;quot;/usr/bin/dpkg returned an error code (1).&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems to me like a grave error of dpkg. I do not know whether it would be best to re-install and configure the package manager. What do you think?&lt;/p&gt;&#xA;" OwnerDisplayName="arielum" LastActivityDate="2017-01-16T14:50:40.863" Title="How do I fix my GUI and package manager, after having removed nvidia-prime?" Tags="|drivers|graphics|" AnswerCount="0" CommentCount="5" ClosedDate="2019-10-22T03:26:34.480" ContentLicense="CC BY-SA 3.0" />
  <row Id="10186" PostTypeId="1" CreationDate="2017-01-16T15:26:13.610" Score="5" ViewCount="1760" Body="&lt;p&gt;I have a touchscreen Dell XPS 9550 and an external 27&quot; Dell screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make sure the external monitor doesn't scale everything up as it currently is by 2x?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The XPS is HiDPI whilst the screen is FHD. Output from &lt;code&gt;xrandr -q&lt;/code&gt; reveals the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;eDP1 connected primary 3840x2160+2560+0 (normal left inverted right x axis y axis) 350mm x 190mm &#xA;...&#xA;HDMI1 connected 2560x1440+0+214 (normal left inverted right x axis y axis) 600mm x 340mm&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I initially followed the instructions on &lt;a href=&quot;https://askubuntu.com/questions/393400/is-it-possible-to-have-two-different-dpi-configurations-for-two-different-screen&quot;&gt;https://askubuntu.com/questions/393400/is-it-possible-to-have-two-different-dpi-configurations-for-two-different-screen&lt;/a&gt; however Pantheon keeps resetting itself, and I'm unable to set the desired dimensions ( adjusted the calculations based upon the output above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to set the XPS to the right of the monitor.&lt;/p&gt;&#xA;" OwnerUserId="8042" LastActivityDate="2019-09-22T18:10:10.857" Title="Multiple DPi Screens on Loki" Tags="|release-loki|display|hidpi|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10187" PostTypeId="2" ParentId="9952" CreationDate="2017-01-16T16:20:38.563" Score="3" Body="&lt;p&gt;I had the same problem and i got to fix it by &#xA;*opening the terminal&#xA;*run upgrade&#xA;*run ¨ sudo apt-get purge xserver-xorg-video-intel&#xA;* run autoremove&#xA;and finally reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it fixed the flickering and now even the wallpaper changes all normal. no glitches anymore.&lt;/p&gt;&#xA;" OwnerUserId="7633" LastActivityDate="2017-01-16T16:20:38.563" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10188" PostTypeId="2" ParentId="10123" CreationDate="2017-01-16T16:24:55.303" Score="-2" Body="&lt;p&gt;If you have an Intel; run this in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge xserver-xorg-video-intel&#xA;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and reboot your system.&lt;/p&gt;&#xA;" OwnerUserId="7633" LastEditorUserId="26" LastEditDate="2017-01-24T19:00:10.250" LastActivityDate="2017-01-24T19:00:10.250" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10189" PostTypeId="1" CreationDate="2017-01-16T18:12:31.310" Score="1" ViewCount="182" Body="&lt;p&gt;I've already tried with 3 or 4 tutorials to install GIMP 2.8 or 2.9. But I always get the same error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; gimp : Depends: libgimp2.0 (&amp;gt;= 2.9.5~65-0t4~ppa~00faf17) but it is not going to be installed&#xA;        Depends: libgimp2.0 (&amp;lt;= 2.9.5~65-z) but it is not going to be installed&#xA;        Depends: libgegl-0.3-0 (&amp;gt;= 1:0.3.6.20) but it is not going to be installed&#xA;        Depends: libmypaint (&amp;gt;= 1.3.0-0t2~ppa) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I use elementaryOS 3.0 Freya. Help&lt;/p&gt;&#xA;" OwnerUserId="8159" LastActivityDate="2017-01-22T23:45:28.400" Title="Error while installing GIMP" Tags="|gimp|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10193" PostTypeId="2" ParentId="9742" CreationDate="2017-01-17T02:05:58.300" Score="1" Body="&lt;p&gt;You can download and use gparted software visually and directly vis AppCenter on the Loki. After partitioning HDD as you want, you can install windows on the region of storage partiotioned for windows. There are a lot of partiotion software on Linux but when you are a novice, I recommend gparted software on Loki and more thing is that you can use softwares such as LibreOffice or OpenOffice on many Linux distros instead of MS Office on windows.&lt;/p&gt;&#xA;" OwnerUserId="8121" LastActivityDate="2017-01-17T02:05:58.300" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10196" PostTypeId="2" ParentId="3625" CreationDate="2017-01-17T07:48:20.683" Score="1" Body="&lt;p&gt;I had faced the same issue, just press &lt;code&gt;Alt+F2&lt;/code&gt; and it will be back. Otherwise try following post: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8123/loki-dock-missing&quot;&gt;Loki - Dock missing&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8165" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-17T07:48:20.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10198" PostTypeId="2" ParentId="2162" CreationDate="2017-01-17T08:16:29.647" Score="2" Body="&lt;p&gt;I use this command and it works just fine for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I use it to restart wifi whenever it stops working (it was much more of an issue after new release of Ubuntu/Xubuntu 16.04, in Loki it's much more stable for me so I use it very little, usually after many suspends).&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2017-01-17T08:16:29.647" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10199" PostTypeId="1" CreationDate="2017-01-17T08:48:09.647" Score="1" ViewCount="175" Body="&lt;p&gt;I rebooted and now when I log in, nothing but the wallpaper shows up.and I can't do nothing but wait some seconds everything back to normal&lt;/p&gt;&#xA;" OwnerUserId="8167" LastEditorUserId="8167" LastEditDate="2017-01-23T06:55:06.383" LastActivityDate="2017-01-23T18:36:34.767" Title="I rebooted and now when I log in, nothing but the wallpaper shows up[sloved]" Tags="|release-loki|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2018-03-11T02:00:47.290" ContentLicense="CC BY-SA 3.0" />
  <row Id="10201" PostTypeId="1" AcceptedAnswerId="10219" CreationDate="2017-01-17T12:10:16.817" Score="1" ViewCount="251" Body="&lt;p&gt;I've been using Elementary OS (loki) for a few days now, and I initially had no problems. The only strange thing I noticed is that apt update was throwing some weird errors because it was targeting loki distribution instead of xenial. After I changed this and installed updates, the problem began. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open the Spotify client, the wingpanel bar disappears&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems similar to this issue &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9004/spotify-crashing-the-wingpanel-loki&quot;&gt;Spotify crashing the wingpanel (loki)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to be the case that if I close spotify and press super + space, the wingbar returns. However, it does not return while the client is open. What is particularly annoying is that it was working perfectly fine before I installed the updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do to fix this?&lt;/p&gt;&#xA;" OwnerUserId="8169" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-18T11:17:40.383" Title="Wingpanel disappears when opening spotify" Tags="|release-loki|spotify|" AnswerCount="1" CommentCount="2" ClosedDate="2017-01-22T23:34:45.587" ContentLicense="CC BY-SA 3.0" />
  <row Id="10202" PostTypeId="1" CreationDate="2017-01-17T13:11:26.283" Score="7" ViewCount="951" Body="&lt;p&gt;After I lock the computer (super + L) the computer sometimes freezes. &#xA;The screen is black (backlight on), no tty is accessible. I'm forced to force-reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried several kernels with no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hardware:&#xA;Dell Latitude E5450&#xA;VGA: Intel Corporation Broadwell-U Integrated Graphics&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current Kernel: &#xA;4.4.25-040425-generic&lt;/p&gt;&#xA;" OwnerUserId="330" LastActivityDate="2018-12-29T05:02:20.490" Title="Elementary freezes after locking screen" Tags="|greeter|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10204" PostTypeId="2" ParentId="10003" CreationDate="2017-01-17T14:15:14.793" Score="0" Body="&lt;p&gt;I have two machines on Loki - one running latest 4.8 and other 4.9 and both run.  As long as you use the Ubuntu packages, your old kernels will still be bootable via Grub.&lt;/p&gt;&#xA;" OwnerUserId="8150" LastActivityDate="2017-01-17T14:15:14.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10205" PostTypeId="1" AcceptedAnswerId="10214" CreationDate="2017-01-17T15:39:04.890" Score="2" ViewCount="1947" Body="&lt;p&gt;since eOS is based on Ubuntu 16.04, how can I update the &lt;code&gt;xserver-xorg-input-libinput&lt;/code&gt; to a newer version? I want to install &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;libinput-gestures&lt;/a&gt; and there is a small problem for my touchpad using the current driver. In a newer version of the driver the problem is solved. Thanks.&#xA;I have to mention that I don't have any problems with my touchpad, I just want to update my libinput drver.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastEditorUserId="2677" LastEditDate="2017-01-18T07:31:11.790" LastActivityDate="2017-01-18T07:31:11.790" Title="Update libinput driver" Tags="|release-loki|touchpad|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10206" PostTypeId="2" ParentId="9952" CreationDate="2017-01-17T17:33:59.847" Score="2" Body="&lt;p&gt;Finally with the help of the user 'I just look ilegal' do the purge of the xserver.&#xA;the steps where:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get install nvidia-current&#xA;&#xA;sudo prime-select intel&#xA;&#xA;sudo apt-get purge xserver-xorg-video-intel&#xA;&#xA;sudo apt-get autoremove&#xA;&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7562" LastActivityDate="2017-01-17T17:33:59.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10207" PostTypeId="1" CreationDate="2017-01-17T18:01:10.110" Score="0" ViewCount="595" Body="&lt;p&gt;I recently install elementary and I found that I can't connect to any network, I looked for in Google and it's a problem with drivers. If you know about please answer me, please.&lt;/p&gt;&#xA;" OwnerUserId="8176" LastActivityDate="2019-01-08T10:02:10.493" Title="problems with wifi rtl8723be" Tags="|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10209" PostTypeId="1" CreationDate="2017-01-17T19:29:08.257" Score="2" ViewCount="445" Body="&lt;p&gt;I've recently started using elementary os Freya (and not Loki because I have a 32-bit machine) and I am more than happy with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I am a devoted user of Adobe Digital Editions, for books from both my local public library and the university library.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried and tried to get ADE to work properly, using Wine. The closest I've gotten to success is by installing the version of ADE (an old one) that's listed for Wine (using Winetricks).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The program seems to install correctly, but I can't get ADE to recognize the downloaded ACSM files that the libraries provide. I can get ADE to download the books themselves, using the ACSM file, but it won't put the book in its library. Thus, I can only read the book using ADE. I can't move it to Calibre, and I cannot transfer it to my e-reader, either. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using elementary OS 0.3.2 Freya, 32-bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;[edit because apparently I haven't posted enough to be able to comment]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for this suggestion. It worked!&lt;/p&gt;&#xA;" OwnerUserId="8178" LastEditorDisplayName="user170" LastEditDate="2018-05-01T17:06:12.547" LastActivityDate="2018-12-28T16:02:35.527" Title="How to install Adobe Digital Editions?" Tags="|software-installation|wine|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10210" PostTypeId="2" ParentId="4386" CreationDate="2017-01-17T20:34:02.243" Score="0" Body="&lt;p&gt;Possibly you didn't set your root password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because you have administrative permissions from your account, you can do pretty much everything with &lt;code&gt;sudo&lt;/code&gt; mode - you enable it with your account password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, root is a master account that can do everything. The whole difference is that even with sudo mode you can't mess up things as bad as you can with root (sth that they didn't think of in windows).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if you need root password, firstly you need to set it up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.Open terminal&#xA;2.Type &lt;code&gt;sudo passwd root&lt;/code&gt;&#xA;3.You'll be asked for your account's password&#xA;4.Then you choose new password for root and confirm it&#xA;5.Ta-Da! You've set root password. You can switch to root with terminal with &lt;code&gt;su&lt;/code&gt; command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, From my experience, you don't need using root in linux (maybe in same cases), so consider if it's really necessary.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-17T20:34:02.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10211" PostTypeId="2" ParentId="10207" CreationDate="2017-01-17T20:40:34.097" Score="1" Body="&lt;p&gt;You may try compiling this drivers from &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtlwifi_new&lt;/a&gt; like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-generic build-essential git&#xA;git clone https://github.com/lwfinger/rtlwifi_new.git&#xA;cd rtlwifi_new&#xA;make clean&#xA;sudo make install&#xA;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-01-17T20:40:34.097" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10212" PostTypeId="2" ParentId="10189" CreationDate="2017-01-17T20:46:46.767" Score="1" Body="&lt;p&gt;Actually, I don't know why you need tutorials - if you needed 4 tutorials and still couldn't install it then probably there's something really stinky.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Generally, the easiest way is to hit &lt;code&gt;Function Key+T&lt;/code&gt; - you'll get the terminal- then write &lt;code&gt;sudo apt install gimp&lt;/code&gt;. Now you'll be asked for your password (type it and remember that there are no display of typed letters, even dots). When you are asked to type y or n, hit y and enter.&#xA;It should install gimp with all it's features.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you get an error, please provide error message and what tutorials you've used/what have you installed. Maybe you installed some old packages that are not compatible. &lt;/p&gt;&#xA;" OwnerUserId="7532" LastEditorUserId="26" LastEditDate="2017-01-22T23:45:28.400" LastActivityDate="2017-01-22T23:45:28.400" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10213" PostTypeId="2" ParentId="8413" CreationDate="2017-01-17T21:03:03.927" Score="1" Body="&lt;p&gt;In case you want to continue using libinput instead of synaptics (which is deprecated), you can try manually upgrading libinput which fixed the problem on my Dell Latitude E7240.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the following links:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;https://launchpad.net/ubuntu/+source/libinput&#xA;&#xA;https://launchpad.net/ubuntu/+source/libwacom&#xA;&#xA;https://launchpad.net/ubuntu/+source/xserver-xorg-input-libinput&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I downloaded the following packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;https://launchpad.net/ubuntu/+archive/primary/+files/libinput10_1.5.3-1ubuntu1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libinput-bin_1.5.3-1ubuntu1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libinput-dev_1.5.3-1ubuntu1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libinput-tools_1.5.3-1ubuntu1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libwacom2_0.22-1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libwacom2-dbg_0.22-1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libwacom-bin_0.22-1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libwacom-common_0.22-1_all.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/libwacom-dev_0.22-1_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/xserver-xorg-input-libinput_0.23.0-2_amd64.deb&#xA;&#xA;https://launchpad.net/ubuntu/+archive/primary/+files/xserver-xorg-input-libinput-dev_0.23.0-2_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once downloaded, open a terminal, change to the directory you downloaded them, and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ./*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll then want to restart, and hopefully your problems will be fixed.&lt;/p&gt;&#xA;" OwnerUserId="8179" LastActivityDate="2017-01-17T21:03:03.927" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10214" PostTypeId="2" ParentId="10205" CreationDate="2017-01-17T21:05:47.320" Score="2" Body="&lt;p&gt;I had to upgrade libinput to fix some touchpad issues on my laptop, I detailed the process in another answer: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10213/8179&quot;&gt;https://elementaryos.stackexchange.com/a/10213/8179&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8179" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-17T21:05:47.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10215" PostTypeId="1" CreationDate="2017-01-18T03:00:47.220" Score="0" ViewCount="205" Body="&lt;p&gt;I would like to install Elementary (Loki) on to my Mac Mini (7,1).  I can boot from the USB installer however after the bootloader I get no video.  I doesn't matter if I select to try without installing, to install, to install OEM, the screen (in this case a 60 inch TV) goes black and never returns.  The boot loader displays perfectly and at a full 1080.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no adapter or anything, I am just connected via an HDMI cable from the HDMI port on the Mac Mini to the back of the TV.&lt;/p&gt;&#xA;" OwnerUserId="8184" LastActivityDate="2017-02-20T04:03:06.287" Title="No video on Mac Mini over HDMI" Tags="|release-loki|system-installation|macintosh|hdmi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10216" PostTypeId="2" ParentId="4264" CreationDate="2017-01-18T08:56:36.753" Score="1" Body="&lt;p&gt;Using an editor such as nano or vim, Add the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unset PROMPT_COMMAND&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to your &lt;code&gt;.bashrc&lt;/code&gt; file, and it will take effect on the next session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To apply the change immediately for the life of the current shell session, type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unset PROMPT_COMMAND &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in your terminal window.&lt;/p&gt;&#xA;" OwnerUserId="280" LastActivityDate="2017-01-18T08:56:36.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10219" PostTypeId="2" ParentId="10201" CreationDate="2017-01-18T11:17:40.383" Score="1" Body="&lt;p&gt;So I managed to fix this by re installing noise (the music player), which I had previously removed. Presumably when I removed it I also removed a library which the sound notification in the wingpanel relied on.&lt;/p&gt;&#xA;" OwnerUserId="8169" LastActivityDate="2017-01-18T11:17:40.383" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10222" PostTypeId="2" ParentId="10092" CreationDate="2017-01-18T11:57:41.870" Score="0" Body="&lt;p&gt;Your all needs the link below to make your Elementary looks like Sierra:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=um2WqTUwN78&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=um2WqTUwN78&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions can be found in details that places the bottom of the video.&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2017-01-18T11:57:41.870" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10224" PostTypeId="1" CreationDate="2017-01-18T13:48:40.803" Score="1" ViewCount="47" Body="&lt;p&gt;So, hey, is it possible to show a notification counter on the bell icon in the wingpanel? Like a small circle with the number of new notifications? &lt;/p&gt;&#xA;" OwnerUserId="7752" LastActivityDate="2017-01-18T13:48:40.803" Title="Is it possible to get a notification counter in the wingpanel?" Tags="|release-loki|notifications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10225" PostTypeId="1" CreationDate="2017-01-18T15:58:20.207" Score="1" ViewCount="61" Body="&lt;p&gt;I recently installed elementary loki on one of my computers. I connect to the internet through a network cable. I have an unreliable Internet and it disconnects sometimes. If it happens on Windows 7, it shows a yellow exclamation on the network adapter indicating the user lost the IP or the internet while the cable is still plugged in. However, i don't get any such information in elementary.I usually have to wait and refresh the browser multiple times to see if it came back on.&#xA;Is there a way to get some indication on the wing panel if internet disappears ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="8191" LastActivityDate="2017-01-18T15:58:20.207" Title="Wired Network indicator while disconnected" Tags="|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10226" PostTypeId="2" ParentId="8095" CreationDate="2017-01-18T19:16:53.577" Score="2" Body="&lt;p&gt;What You want has been implemented by a person.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is its &lt;a href=&quot;https://code.launchpad.net/~kbailey4444/wingpanel/dodge-maximize&quot; rel=&quot;nofollow noreferrer&quot;&gt;LaunchPad Code &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow This &lt;a href=&quot;https://www.bountysource.com/issues/955498-add-optional-hide-mode&quot; rel=&quot;nofollow noreferrer&quot;&gt;Discussion&lt;/a&gt; About its Development.&#xA;Refer &lt;a href=&quot;https://www.youtube.com/watch?v=Y08u_bcJL-U&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; to see it in action.&lt;/p&gt;&#xA;" OwnerUserId="4410" LastEditorUserId="4410" LastEditDate="2017-01-18T19:55:36.407" LastActivityDate="2017-01-18T19:55:36.407" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10227" PostTypeId="1" AcceptedAnswerId="10322" CreationDate="2017-01-18T19:41:58.637" Score="2" ViewCount="587" Body="&lt;p&gt;Hello I accidentally &quot;deleted&quot; my downloads folder, I made a replacement folder and pinned it in files on the left pane so it is as it should be asshown in this screenshot:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cxSLj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cxSLj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However the folder is not styled with the icon as before, pretty minor issue but is there a way to get this back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="8193" LastActivityDate="2017-01-24T05:22:47.310" Title="Deleted downloads folder" Tags="|files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10228" PostTypeId="2" ParentId="10227" CreationDate="2017-01-18T19:51:40.680" Score="0" Body="&lt;p&gt;You can try by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-user-dirs-update&#xA;killall -q -HUP pantheon-files-daemon pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in a terminal.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-18T19:51:40.680" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10229" PostTypeId="2" ParentId="4561" CreationDate="2017-01-18T20:14:43.230" Score="3" Body="&lt;p&gt;I finally got it working after using the explicit calendar URL available under the 'other' clients setup option at &lt;a href=&quot;https://fruux.com/sync/new/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://fruux.com/sync/new/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not simply use '&lt;a href=&quot;https://dav.fruux.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dav.fruux.com/&lt;/a&gt;' as the calendar URL otherwise it will not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zYSzS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zYSzS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2017-02-27T01:15:12.873" LastActivityDate="2017-02-27T01:15:12.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10232" PostTypeId="2" ParentId="8685" CreationDate="2017-01-19T06:32:41.777" Score="0" Body="&lt;p&gt;Boxes, also known as GNOME Boxes is an application of the GNOME Desktop Environment, used to access remote or virtual systems. (wiki)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you should install underlying nessesary tools (in this case qemu)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install qemu-system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8198" LastActivityDate="2017-01-19T06:32:41.777" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10233" PostTypeId="2" ParentId="916" CreationDate="2017-01-19T08:07:20.077" Score="1" Body="&lt;p&gt;What You want has been implemented by a person.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is its &lt;a href=&quot;https://code.launchpad.net/~kbailey4444/wingpanel/dodge-maximize&quot; rel=&quot;nofollow noreferrer&quot;&gt;LaunchPad Code &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow This &lt;a href=&quot;https://www.bountysource.com/issues/955498-add-optional-hide-mode&quot; rel=&quot;nofollow noreferrer&quot;&gt;Discussion&lt;/a&gt; About its Development.&#xA;Refer &lt;a href=&quot;https://www.youtube.com/watch?v=Y08u_bcJL-U&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; to see it in action.&lt;/p&gt;&#xA;" OwnerUserId="4410" LastActivityDate="2017-01-19T08:07:20.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10234" PostTypeId="1" CreationDate="2017-01-19T09:55:23.883" Score="0" ViewCount="186" Body="&lt;p&gt;Is there in elementary OS an option &quot;mobile network&quot; and &quot;hotspot&quot;? &lt;/p&gt;&#xA;" OwnerUserId="8200" LastEditorUserId="578" LastEditDate="2017-01-19T10:40:39.253" LastActivityDate="2017-02-18T12:05:47.527" Title="Is there mobile network, and hotspot in elementary OS?" Tags="|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10235" PostTypeId="1" CreationDate="2017-01-19T11:21:37.913" Score="0" ViewCount="3708" Body="&lt;p&gt;Sorry for the newbie question, I am new to Linux, and have some queries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I go about installing a software (debian package) I have downloaded from a website?&#xA;I have tried few things like&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) Extracting the package and with terminal using the following code to install i.e. 'sudo apt-get install 'software name'&amp;amp; sudo apt-get install 'software name' '&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b) After browsing into the extracted folder open terminal and the same code as above, but I am still unable to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I go about installing it? and how do I install most downloaded softwares from their respective developer website and install it with terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note I am complete newbie so hopefully you can keep things simple so I can understand and enlighten myself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for all the help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mercurial&lt;/p&gt;&#xA;" OwnerUserId="8201" LastActivityDate="2020-04-10T10:01:51.620" Title="How does one install a Debian downloaded package?" Tags="|software-installation|" AnswerCount="4" CommentCount="0" ClosedDate="2020-04-13T21:55:22.420" ContentLicense="CC BY-SA 3.0" />
  <row Id="10236" PostTypeId="2" ParentId="10235" CreationDate="2017-01-19T11:33:11.740" Score="1" Body="&lt;p&gt;Create a empty folder and place the deb inside. Then open the folder on terminal (right click &gt; Open on terminal) and do:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;code&gt;sudo apt -f install /*.deb&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If the file you want to install comes with a tar.xz, tar.gz or similar format you need to extract it first. Just right click on the file and select &lt;code&gt;Extract here&lt;/code&gt;. Then follow the instructions of the README or INSTALL file that's inside what you've extracted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes there's no need to install it, so you can run the program with right click &gt; &lt;code&gt;Run&lt;/code&gt;. Remember to give execute permissions first (right click &gt; properties &gt; permissions tab &gt; set the number to 755 ).&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-01-19T11:33:11.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10237" PostTypeId="2" ParentId="10234" CreationDate="2017-01-19T11:35:30.200" Score="2" Body="&lt;p&gt;Yes, you have both in Loki. You need to go inside Network Settings and configure it.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-01-19T11:35:30.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10238" PostTypeId="1" AcceptedAnswerId="10239" CreationDate="2017-01-19T13:06:47.767" Score="0" ViewCount="691" Body="&lt;p&gt;I'm new to elementary OS, I'm software engineer mostly using Ubuntu Server edition and MacOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Was interested if anyone had tried the new XPS (late 2016) with this OS yet. Would really love to be pointed to any troubleshooting / tips.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Planning to contribute code to the OS too, all going well, and I want to support it because I think it has a real shot at being the ideal OS for new Linux users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will be adding custom PPAs etc. for docker, node.js etc. as I need to use later versions than the Ubuntu LTS packages for work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have reservations about using LTS based distro... I get that it's unlikely elementary will have resources to track latest stable. Anyone got advice on that side of things?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, where does the eOS community interact?&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-07-14T02:44:24.343" Title="Dell XPS 13&quot; (9360) arriving soon, downloaded Loki - any issues / tips?" Tags="|system-installation|ppa|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10239" PostTypeId="2" ParentId="10238" CreationDate="2017-01-19T13:21:52.037" Score="1" Body="&lt;p&gt;I'm working on a XPS 15 (with Skylake cpu) for a month now, Elementary OS works great even with the high DPI screen. &#xA;When I run into trouble I usually search on &quot;ubuntu&quot; (for example &quot;ubuntu dell xps 13&quot;) since most of it applies to Elementary OS. You can also find a lot of information on bugs etc on the Elementary Launchpad pages: &lt;a href=&quot;https://launchpad.net/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/elementary&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a web developer, also using projects like Node, Docker, Atom etc, and using custom ppa's works fine. I'm looking forward to Snaps, looks like that will be way easier for users and application developers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I was still using Elementary OS Freya (Ubuntu 14 LTS) I did run into a few support limitations in the end, but with custom ppa's you get very far. Since I switched to Loki I didn't experience support limitations. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think users interact here, on Redit, Twitter and there might even be a Slack channel these days. &#xA;Welcome and have fun with Elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-01-19T13:50:31.173" LastActivityDate="2017-01-19T13:50:31.173" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10240" PostTypeId="2" ParentId="10235" CreationDate="2017-01-19T13:27:50.257" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;If it's a &lt;code&gt;.deb&lt;/code&gt; file and you prefer using a GUI (Graphical user interface) I would recommend installing and using the &lt;em&gt;GDebi Package Installer&lt;/em&gt; from the AppCenter.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;elementary OS has a curated app to install and remove &lt;code&gt;.deb&lt;/code&gt; called &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;Eddy&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Or if you are interested in the command line way you can install a &lt;code&gt;.deb&lt;/code&gt; file using: &lt;br&gt;&#xA;&lt;code&gt;$ sudo dpkg -i package_name.deb&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="18392" LastEditDate="2020-04-10T10:01:51.620" LastActivityDate="2020-04-10T10:01:51.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10241" PostTypeId="2" ParentId="10238" CreationDate="2017-01-19T13:34:18.410" Score="0" Body="&lt;p&gt;i thing you have a lot of question ;) and i will try to answer them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you plan on contributing in development your are very welcome. depending on which level you want to contribute (website, desktop, applications) i would say start reading the guidelines and tutorials written on the website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary has explored other ways. i believe debian but i don't know what the conclusion was.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary community is mostly google plus also for 3th party developers. Via IRC you can contact elementary developer. The elementary developers have a private back office in Slack to talk about stuff.&lt;/p&gt;&#xA;" OwnerUserId="94" LastEditorUserId="94" LastEditDate="2017-01-20T07:16:09.643" LastActivityDate="2017-01-20T07:16:09.643" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10242" PostTypeId="2" ParentId="10235" CreationDate="2017-01-19T14:54:12.193" Score="1" Body="&lt;p&gt;You don't have to extract the downloaded archive, you can install it with the command line command in a terminal window:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --install &amp;lt;downloaded&amp;gt;.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(replace &lt;code&gt;downloaded.deb&lt;/code&gt; with the actual package file name).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-19T14:54:12.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10244" PostTypeId="1" CreationDate="2017-01-19T16:04:36.627" Score="0" ViewCount="211" Body="&lt;p&gt;Suddenly I get the &quot;unprotected private key file&quot; warning when trying to ssh.  There is a server I connect to every few days and have never had this issue before, suggesting that somehow the permissions on my id_rsa file changed since the last time I used ssh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I install the AppCenter updates frequently and wonder whether one of these updates could have been responsible?  Has anyone else experienced this?  Else I may have been hacked somehow...&lt;/p&gt;&#xA;" OwnerUserId="6868" LastActivityDate="2017-02-18T18:12:38.350" Title="SSH private key permissions suddenly changed" Tags="|release-loki|updates|permissions|ssh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10245" PostTypeId="2" ParentId="8685" CreationDate="2017-01-19T16:24:44.557" Score="0" Body="&lt;p&gt;I believe you need KVM to run Boxes. Try this...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install qemu-kvm libvirt-bin ubuntu-vm-builder bridge-utils&#xA;&#xA;sudo adduser  libvirtd&#xA;&#xA;sudo adduser kvm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it's what I use in order to run the Android Emulator for testing, it should help with your Boxes issue as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;you might also want to install &lt;code&gt;virt-manager&lt;/code&gt;. Run it and you should see QEMU/KVM in the list. This will confirm you're good to go :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reference:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/KVM/Installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/KVM/Installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="578" LastEditDate="2017-04-20T20:06:04.987" LastActivityDate="2017-04-20T20:06:04.987" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10246" PostTypeId="1" CreationDate="2017-01-19T16:52:58.907" Score="2" ViewCount="10976" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dzgwr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dzgwr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the sidebar font is the same ubuntu font, &#xA;using elementary tweaks only provides &#xA;Default, Document, Title and Monoscape fonts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;These settings don't change the vscode sidebar ubuntu font, and why the heck ubuntu font is there in vscode, please provide a solution&lt;/p&gt;&#xA;" OwnerDisplayName="user7862" LastEditorUserId="16827" LastEditDate="2019-04-16T00:02:41.093" LastActivityDate="2019-04-16T00:02:41.093" Title="How can I Change VSCODE sidebar font" Tags="|fonts|vscode|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10247" PostTypeId="2" ParentId="10244" CreationDate="2017-01-19T16:55:43.840" Score="1" Body="&lt;p&gt;The warning is about the permissions of your private ssh key on your local host (&lt;code&gt;~/.ssh/id_rsa&lt;/code&gt;) and you might want to try to reset the permissions to their defaults with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod 700 ~/.ssh/&#xA;chmod 600 ~/.ssh/id_rsa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-19T16:55:43.840" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10249" PostTypeId="2" ParentId="10235" CreationDate="2017-01-19T18:12:31.370" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo apt install gdebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;gdebi will install .deb files when opened from the file manager&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="578" LastEditDate="2017-01-19T21:07:53.643" LastActivityDate="2017-01-19T21:07:53.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10250" PostTypeId="1" CreationDate="2017-01-19T18:13:24.147" Score="0" ViewCount="539" Body="&lt;p&gt;gggrr&#xA;please help!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OK my situation:&#xA;I'm struggling with my 32bit MacBook with a defect dvd drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Managed to make an bootable USB stick, but the macbook won't recognize this stick, when booting up and pressing the option key.&#xA;I made an separate partition on the hdd but did't manage to make this bootable with a version of elementaryOS. I tried to copy ElementaryOS on the partition by the restore function of Disk Utility (OSX).&#xA;An error makes this impossible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone knows a nifty trick to:&#xA;Make my old macbook recognize the bootable USB?&#xA;or&#xA;Copy elementaryOS on the hdd and boot from this partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran out of options and I hope on somebody out there with more tricks on his sleeves than me.&#xA;Regards, Jake&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Thanks Rocco &amp;amp; Alexandr for your respond.&#xA;In addition to my post; I found a 32 bit version of ElementaryOS (elementaryos-0.3.2) I think it's called Freya.&#xA;I created a bootable USB-stick with Etcher on a other computer.&#xA;This stick won't appear in the bootable disk menu, booting up, pressing the option key. I cleared the PRAM to be sure the computer has no preferred disks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I let my computer recognize the USB?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Grrr I going slightly mad!!! &lt;/p&gt;&#xA;" OwnerUserId="8208" LastEditorUserId="26" LastEditDate="2017-01-23T18:36:51.273" LastActivityDate="2017-01-23T18:36:51.273" Title="cannot install elementary OS by usb or hdd" Tags="|usb-drive|macintosh|hdd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10251" PostTypeId="1" CreationDate="2017-01-19T18:24:56.357" Score="0" ViewCount="546" Body="&lt;p&gt;I'm running into issues trying to install rofi. &lt;a href=&quot;https://davedavenport.github.io/rofi/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://davedavenport.github.io/rofi/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install rofi&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; rofi : Depends: libxkbcommon-x11-0 (&amp;gt;= 0.5.0) but 0.4.3-2~14.04~ricotz1 is to be installed&#xA;        Depends: libxkbcommon0 (&amp;gt;= 0.5.0) but 0.4.3-2~14.04~ricotz1 is to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;How can I fix this?&#xA;&#xA;ls /etc/apt/sources.list.d&#xA;atlassian-hipchat4.list          numix-ppa-trusty.list.save&#xA;atlassian-hipchat4.list.save     patches.list&#xA;chrome-remote-desktop.list       patches.list.save&#xA;chrome-remote-desktop.list.save  ricotz-testing-trusty.list&#xA;elementary.list                  tomato-team-tomato-stable-trusty.list&#xA;elementary.list.save             tomato-team-tomato-stable-trusty.list.save&#xA;google-chrome.list               versable-elementary-update-trusty.list&#xA;google-chrome.list.save          versable-elementary-update-trusty.list.save&#xA;&#xA;cat /etc/apt/source.list&#xA;cat: /etc/apt/source.list: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8206" LastEditorUserId="8206" LastEditDate="2017-01-25T17:02:29.940" LastActivityDate="2017-01-25T17:41:48.317" Title="Trying to install rofi" Tags="|software-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10252" PostTypeId="1" AcceptedAnswerId="10266" CreationDate="2017-01-19T19:09:04.907" Score="1" ViewCount="140" Body="&lt;p&gt;Unfortunately I deleted  the folder &quot;Downloads&quot; in pantheon-files (left side of window)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I restore it?&lt;/p&gt;&#xA;" OwnerUserId="8209" LastActivityDate="2017-01-20T09:01:24.573" Title="How can I restore a folder in pantheon-files" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10254" PostTypeId="2" ParentId="10252" CreationDate="2017-01-19T20:01:00.827" Score="2" Body="&lt;p&gt;Yes, go to Trash, right click the folder and Restore.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-19T20:01:00.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10255" PostTypeId="2" ParentId="10250" CreationDate="2017-01-19T20:54:23.823" Score="2" Body="&lt;p&gt;Try creating your bootable media with the app Etcher (&lt;a href=&quot;https://etcher.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://etcher.io/&lt;/a&gt;). It has been the only app I have used where the bootable media is recognized in all the hardware I have used it with. Good luck.&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-01-19T20:54:23.823" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10256" PostTypeId="2" ParentId="2159" CreationDate="2017-01-19T21:47:38.783" Score="0" Body="&lt;p&gt;Not for me. Can't upload files to a remote server in Elementary loki's &quot;Files&quot;. Can connect though and save files through the connection via Geany . I currently circumvented the problem by installing and using nautilus. The ftp then works as intended.&lt;/p&gt;&#xA;" OwnerUserId="8212" LastActivityDate="2017-01-19T21:47:38.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10260" PostTypeId="2" ParentId="10176" CreationDate="2017-01-20T06:05:36.417" Score="4" Body="&lt;p&gt;In what looks like a forward-looking change according to &lt;a href=&quot;https://github.com/elementary/stylesheet/issues/5&quot;&gt;issue #5&lt;/a&gt; on the stylesheet's GitHub repo, apps have to request the rounded corners via a class in elementary's GTK+ stylesheet. See &lt;a href=&quot;https://github.com/elementary/stylesheet/pull/20&quot;&gt;pull request #20&lt;/a&gt; for the relevant code. I'm not sure the apps have caught up with this change, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's probably a way for you to modify the stylesheet so that the apps you desire have rounded corners (check out &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/app.css&lt;/code&gt;), but you'd need to know the class for each app's window frame, to which you'd add a &lt;code&gt;border-radius&lt;/code&gt; value -- it looks like it isn't really standardized at the moment.&lt;/p&gt;&#xA;" OwnerUserId="8214" LastActivityDate="2017-01-20T06:05:36.417" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10261" PostTypeId="1" CreationDate="2017-01-20T06:59:36.190" Score="0" ViewCount="58" Body="&lt;p&gt;I noticed that elementary os loki is only available in amd 64bit version.  my dell 6400 series laptop had below configuration. Need to know if loki can be installed.  currently its running elementary OS Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;CPU :  intel dual core &lt;/p&gt;&#xA;&#xA;&lt;p&gt;RAM :  4 GB.&lt;/p&gt;&#xA;" OwnerUserId="8216" LastActivityDate="2017-03-21T08:33:32.660" Title="upgrade to elementary loki on dell 6400" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10262" PostTypeId="2" ParentId="10261" CreationDate="2017-01-20T07:38:38.303" Score="1" Body="&lt;p&gt;Loki should be working pretty well with this configuration. However, I suggest that you test it with an USB stick before installing Loki.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-20T07:38:38.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10265" PostTypeId="1" AcceptedAnswerId="10278" CreationDate="2017-01-20T08:47:20.427" Score="2" ViewCount="306" Body="&lt;p&gt;I'm new to elementary and i'd like to burn a ISO with persistance on my pendrive, in order to try it before installing on HD, and having a useful rescue system, just in case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, since fat32 formatted perdrive can have at least 4GB of persistance space related, i was wondering if i could as well install directly elementary on the pendrive, from another live system (i.e. a CD),  so i can use the entire space of my drive AND I can format it in EXT4, more suitable (i guess) from a linux distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, is there an ideal size of pendrive for such a system? USB 3.0 of course, but.. the more size, the better? Thanks in advance!    &lt;/p&gt;&#xA;" OwnerUserId="8217" LastActivityDate="2017-01-20T21:45:30.047" Title="Live system with persistance Vs Installing 0.4 loki on USB pendrive" Tags="|system-installation|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10266" PostTypeId="2" ParentId="10252" CreationDate="2017-01-20T09:01:24.573" Score="0" Body="&lt;p&gt;The above answer will work anytime (provided you have not emptied the Trash). If you realise your mistake immediately after doing it, you can also press Ctrl-Z to undo most actions.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-01-20T09:01:24.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10267" PostTypeId="1" AcceptedAnswerId="10270" CreationDate="2017-01-20T11:19:50.240" Score="2" ViewCount="290" Body="&lt;p&gt;Something strange is happening here. When I open a terminal, it is completely empty. No user@hostname nor the current working directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3dJXz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3dJXz.png&quot; alt=&quot;empty terminal&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be worth noting that I'm working of of an external hdd wich has a complete install of eOS on it. So it's not a live usb. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And even more important, it only happens to one of the two users I have on the install. The one I made first, opens the terminal just fine, including the expected green text and the ability to type in it. The second one just shows what you see in the image. And I can't type in it. Furthermore, if I type ctrl+alt+{F1;...;F9} I don't get a login either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know what happend here? And how I could fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Sander&lt;/p&gt;&#xA;" OwnerUserId="8219" LastActivityDate="2017-01-20T12:27:51.713" Title="Completly empty terminal screen" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10269" PostTypeId="2" ParentId="10267" CreationDate="2017-01-20T12:27:13.847" Score="0" Body="&lt;p&gt;While clicking around on the site, if found &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5223/forgot-to-set-bash-as-terminal-before-uninstalling-fish?rq=1&quot;&gt;this&lt;/a&gt;. That made me check my passwd file. Turns out that the second user had no shell assigned to him. I always assumed that useradd defaults to bash if no shell is specified with the -s switch. Is that not the case?&lt;/p&gt;&#xA;" OwnerUserId="8219" LastActivityDate="2017-01-20T12:27:13.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10270" PostTypeId="2" ParentId="10267" CreationDate="2017-01-20T12:27:51.713" Score="2" Body="&lt;p&gt;What a strange problem. I'm not sure if such a thing is possible, but perhaps your user does not have a shell associated with it (for whatever reason).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first port of call should be to check whether there is a shell listed in the &lt;code&gt;/etc/passwd&lt;/code&gt; file, which you can do by running &lt;code&gt;cat /etc/passwd | grep YOURUSER&lt;/code&gt;. The output should be something like this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;mike:x:1000:1000:Mike Wild,,,:/home/mike:/bin/bash&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Be warned that the second field ('x') might contain your password hash, so don't post that part here if that's the case!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are missing the shell entry at the end, then you can run &lt;code&gt;sudo chsh -s /bin/bash YOURUSER&lt;/code&gt; to set it back to bash. However this assumes that the second user you have is in &lt;code&gt;sudoers&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-20T12:27:51.713" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10271" PostTypeId="2" ParentId="10246" CreationDate="2017-01-20T13:35:46.303" Score="2" Body="&lt;p&gt;VS Code is an Electron app (built using web technologies), as opposed to a native app (using GTK). I don't believe you have any control over the fonts beyond whatever settings Microsoft have exposed in the config; and it doesn't look like there is an option to change the sidebar font.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a GitHub issue &lt;a href=&quot;https://github.com/Microsoft/vscode/issues/3702&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; requesting added support for changing the sidebar font, so keep an eye on that.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-20T13:35:46.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10272" PostTypeId="2" ParentId="12155" CreationDate="2017-01-20T14:28:52.030" Score="3" Body="&lt;p&gt;This is a known bug in dbus. There is an upstream fix but unfortunately it hasn't made its way into elementary yet (&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5nt48i/anyone_experiencing_slingshot_issues_during/dcekabd/&quot; rel=&quot;nofollow noreferrer&quot;&gt;apparently the fix is in staging, so it should appear soon&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I think the related problem is explained and fixed here:&#xA;  &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;OS Loki is running dbus-daemon 1.10.6 from 2015-12-1 while the problem was fixed in July 2016. An update to newer dbus version (one after 1.10.10) should fix the issue.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;To fix the issue for now:&#xA;  Rename the file to at-spi-dbus-bus.desktop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377/comments/27&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377/comments/27&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want to mess about with files I've found the following temporary workaround:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter a PTTY (Press &lt;code&gt;CTRL&lt;/code&gt; &lt;code&gt;+&lt;/code&gt; &lt;code&gt;ALT&lt;/code&gt; &lt;code&gt;+&lt;/code&gt; &lt;code&gt;F1&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Login.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart lightdm with &lt;code&gt;sudo systemctl restart lightdm&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You will be taken back to the login screen, login and Slingshot should appear instantly this time.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-20T14:28:52.030" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10275" PostTypeId="2" ParentId="10250" CreationDate="2017-01-20T17:05:12.977" Score="1" Body="&lt;p&gt;just remember that elementary 0.4 Loki doesn't support 32 bit processors&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2017-01-20T17:05:12.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10276" PostTypeId="1" CreationDate="2017-01-20T20:57:09.877" Score="0" ViewCount="928" Body="&lt;p&gt;I really love elementary OS, but there is a really annoying bug where the mouse shakes when I use my track pad.&#xA;It's not a defective track pad, I have installed Ubuntu Mate and had no problems with the mouse.&lt;/p&gt;&#xA;" OwnerUserId="8224" LastActivityDate="2019-04-20T05:35:45.080" Title="Touchpad shaking" Tags="|mouse|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10278" PostTypeId="2" ParentId="10265" CreationDate="2017-01-20T21:45:30.047" Score="2" Body="&lt;p&gt;I can't speak of experience for a real pendrive. However, I have installed elementaryOS just a week ago on an external hard drive. I have to say that it works like charm for the moment. In contrary to a persistent live os which I never made succesfully. But that might be a case of not trying hard enough.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Three things come to mind:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When installing eOS, I had to remove the harddisk of my pc as the installer kept messing up the bootloader on that disk instead of putting a new one on the hdd.&lt;/li&gt;&#xA;&lt;li&gt;Make sure not te make a swap partition on the usb drive. I've read multiple times that it wrecks your thumbdrive. I don't know about a swapfile, but sadly you need one of the two. And that is the reason I choose a hdd I had laying around. No need to worry about wear and tear of excessive writing.&lt;/li&gt;&#xA;&lt;li&gt;You can't install from a installation. So if you choose to install eOS on a pendrive, you will still have to make a live usb (possibly without persistence) to be able to install it on your computer. But then again, you needed when to install eOS to the hdd on the first hand.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;A few other things. Linux is perfectly able to read FAT32. so formatting is not really a problem. I has however the restriction of 4Gb. A ext4 filesystem is able to handle larger persistence files.&#xA;Another thing to think about is usability of your thumbdrive if you still use windows. You need a fat32 or ntfs partition as first partition of the drive if you want to use the remaining space in windows. Windows has no ability to detect a 2nd partition or an extX parition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as size goes, I made a eOS live usb on a 4Gb stick. The image only uses about 1.3Gb of that space. So i'd say 8 or maybe 16Gb is plenty for trying it out. Even 4Gb would be sufficient if you keep your files somewhere else. On the other hand, a full install required 8Gb of my hdd. So you would need a pendrive of at least 16Gb to ensure the install fits on the drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The usb 3.0 as absolutely an enormous advantage. The usb2.0 live install is almost terribly slow. The usb3.0 full install is very usable. Not much more delay than a computer of maybe 2 or 3 years old.&lt;/p&gt;&#xA;" OwnerUserId="8219" LastActivityDate="2017-01-20T21:45:30.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10279" PostTypeId="1" CreationDate="2017-01-21T00:04:27.577" Score="0" ViewCount="167" Body="&lt;p&gt;Did anyone notice after the update today (Jan 20) that the title bars in Chrome and Firefox have changed? There is a clear division between the tab bar area and the top window border. This did not exist before. Even loading themes into the browsers does not fix it.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-26T04:28:02.130" Title="Title bars on Chrome and Firefox changed after update 1/20/17" Tags="|updates|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10280" PostTypeId="2" ParentId="10215" CreationDate="2017-01-21T03:36:03.043" Score="1" Body="&lt;p&gt;So the thing that worked was simply unplugging the HDMI cable and plugging it back in, I have to do this after every reboot, it's a bit annoying but manageable. &lt;/p&gt;&#xA;" OwnerUserId="8184" LastActivityDate="2017-01-21T03:36:03.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10281" PostTypeId="1" CreationDate="2017-01-21T07:12:04.247" Score="1" ViewCount="77" Body="&lt;p&gt;&lt;strong&gt;live USB and keyboard&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to use Loki on a live USB flash drive to work on my Mac mini late 2012.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I successfully created a bootable Loki USB drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The net is accessible via WiFi (by the way, Ubuntu and Mint&#xA;can’t from a live USB!).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My two first problems  are with the keyboard : &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I need absolutely an Azerty keyboard (I’m french).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I want to use my Apple aluminium &lt;em&gt;extended&lt;/em&gt; keyboard.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Is there a way to add some files to the USB stick to solve this problem ?&lt;/p&gt;&#xA;" OwnerUserId="8230" LastActivityDate="2017-01-21T07:12:04.247" Title="live USB and keyboard" Tags="|release-loki|settings|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10284" PostTypeId="2" ParentId="10238" CreationDate="2017-01-21T18:32:20.737" Score="1" Body="&lt;p&gt;Im just playing around on my 9360 and elementary right now, i wouldve installed it already but as i cant somehow find my ssd to partition it, i guess i will have to wait for an update or something, or the day ive got either balls to ditch windows or ill get a new ssd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i had problems on windows side with my killer wifi card, so i already changed it for an intel card (8260 i think it was) and it at least has been problemfree. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Im running the i5, 256gb, qhd and 8gb ram version and even the touch seems to work out of the box, keyboard layout is totally off on my scandinavian keyboard, even after i changed it in the settings, but havent looked too much into it, not too bad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;touchpad works like a charm, but you need to enable the touch click yourself in the settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so, basically, if only i could see my ssd in the installer i would be happy. have not tried any other distros yet, since arch and elementary are basically what i would be interested in and id love to have elementary here  for obvious reasons&lt;/p&gt;&#xA;&#xA;&lt;p&gt;oh yeah im writing this on the live cd so my keyboard layout problems is my excuse for bad grammar and being hard to understand&lt;/p&gt;&#xA;" OwnerUserId="8237" LastActivityDate="2017-01-21T18:32:20.737" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10287" PostTypeId="1" CreationDate="2017-01-21T19:38:13.723" Score="1" ViewCount="410" Body="&lt;p&gt;Another day another question. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been trying eOS for the last couple of days on a external hdd. I very much like what I see. Because of that, I want to move from ubuntu to eOS. For that, I was checking the partitioning of my 2 harddrives. I found strange things and I am curious which I can remove. In the picture you find the output of lsblk:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qohZc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qohZc.png&quot; alt=&quot;lsblk output&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sda is my classic 1Tb hdd. It contains a data partition which is shared by windows and linux. At also has the home parition of ubuntu. That one will be removed for eOS as I will be working with softlinks to the data partition. It also contains a curious BIOS_RVY partition. After some searching it seams to be a partition containing the factory defaults of msi. Can i delete it if I make a image as backup? I don't feel like losing 20Gb to some factory defaults. It also contains a 4th partition wich I can't seem to mount. When trying I get something that basically says &quot;we have no idea what went wrong. Maybe you get some hints in the syslog.&quot; that however doesn't seem to contain anything useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next drive, sdb, is my ssd. First partition is named WinRE tools. I have no clue about what it is or contains. Anybody got some hints? sdb2 is a /boot/efi parition so that one stays. Next up is some kind of mysterious microsoft reserved partition. That one should contain boot files etc for windows. So I believe that has to stay. As does the next, which contains my wind &lt;/p&gt;&#xA;" OwnerUserId="8219" LastActivityDate="2019-12-11T06:00:55.203" Title="Partitioning dual boot" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10288" PostTypeId="1" AcceptedAnswerId="10294" CreationDate="2017-01-21T20:23:21.460" Score="4" ViewCount="24256" Body="&lt;p&gt;I have a Asus K501UQ with an Intel  which worked fine on my Windows partition. I've put on Elementary OS (Loki) but the card is disabled and I'm not able to enable it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill list all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: asus-wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: asus-bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;3: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So perhaps it's because the interface is hard blocked but I'm not sure why there are two Wireless LAN interfaces listed here.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lshw -class network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: enp2s0&#xA;       version: 10&#xA;       serial: 34:97:f6:15:c5:38&#xA;       size: 1Gbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-3_0.0.1 04/23/13 ip=192.168.0.11 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;       resources: irq:127 ioport:d000(size=256) memory:df204000-df204fff memory:df200000-df203fff&#xA;  *-network DISABLED&#xA;       description: Wireless interface&#xA;       product: Wireless 7265&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: wlp3s0&#xA;       version: 59&#xA;       serial: 48:45:20:c5:c9:1b&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-59-generic firmware=19.324151.0 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn&#xA;       resources: irq:132 memory:df100000-df101fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I perform:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sudo ifconfig wlp3s0 up&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get the error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SIOCSIFFLAGS: Operation not possible due to RF-kill&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm assuming this is because phy0 is hard blocked. As far as I'm aware there's no physical switch on my laptop and it works if I boot into Windows. I've hit the limit of my knowledge, any help would be greatly appreciated. &lt;/p&gt;&#xA;" OwnerUserId="8240" LastEditorUserId="578" LastEditDate="2017-01-22T13:55:19.583" LastActivityDate="2020-09-06T13:32:21.190" Title="How to enable Wifi in elementary OS Loki?" Tags="|wifi|" AnswerCount="7" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10289" PostTypeId="1" AcceptedAnswerId="10308" CreationDate="2017-01-21T21:41:09.763" Score="3" ViewCount="587" Body="&lt;p&gt;I just installed Elementary OS on my Lenovo Yoga.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During install everything worked as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No when I reboot sometimes no networks are found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this I got to reboot various times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this ?&lt;/p&gt;&#xA;" OwnerUserId="8238" LastActivityDate="2017-01-23T13:24:02.463" Title="WIFI sometimes not working" Tags="|release-loki|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10290" PostTypeId="1" CreationDate="2017-01-21T22:23:20.090" Score="1" ViewCount="659" Body="&lt;p&gt;When you drag the window corner, other window on the side will fill the free space, is possible to make something like this with Pantheon/Gala?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SC9KO.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SC9KO.gif&quot; alt=&quot;windows 10 snap&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6604" LastActivityDate="2019-01-23T23:04:22.567" Title="Is possible to make Pantheon snap windows like Windows 10?" Tags="|gala|pantheon|window-manager|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10291" PostTypeId="2" ParentId="10065" CreationDate="2017-01-22T00:57:45.377" Score="1" Body="&lt;p&gt;Thanks Jeremy31, I tried the a2dp.py script but I was getting the following error:&#xA;`Cannot find &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bluez_card.04_52_C7_1B_7B_BC` using `pactl list cards short`. Retrying 8 more times&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After trying a few other suggestions I tried &lt;a href=&quot;https://askubuntu.com/a/836202/519324&quot;&gt;https://askubuntu.com/a/836202/519324&lt;/a&gt;. &#xA;I used the regular Elementary bluetooth discover flow, then I installed Blueman but the Audio Profile didn't have a submenu. Running &lt;code&gt;Setup&lt;/code&gt; on my device, selecting Connect to: Handsfree suddenly my device appeared as sound output. So now it sort of works. I still need to restart my bluetooth device frequently to get it to work properly.&#xA;When I'm home I'll try this with my other bluetooth device, see if that fixes it for that one too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: In regards to my Bose QuietControl 30, I've had to re-pair a couple of times in the mean time and usually I've had to retry the setup part a couple of times before it would suddenly start working again.&#xA;I don't need to restart my bluetooth device that often anymore. I still need to restart it when it was on before my computers boots, then I need to restart for it to reconnect. And if I walk to far and the audio get's off-sync.&#xA;I've never been able to get my UE Boom 2 to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried replacing the Atheros Qualcomm Killer with the Intel 8265, which also forced me to upgrade the kernel, but that gave me even more issues. The bluetooth connection would always stop after a few minutes, even after removing tlp.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-12-10T12:27:34.210" LastActivityDate="2017-12-10T12:27:34.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10292" PostTypeId="2" ParentId="10288" CreationDate="2017-01-22T09:57:44.240" Score="2" Body="&lt;p&gt;I have this problem too when I disable physically my WiFi connection (Hardware blockage) , or just simply by turning WiFi off by clicking on the toggle in the WiFi list connection ( Sfteware blockage)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In both cases, I was using this command to solve the problem &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill unblock 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I am not sure if it is going to help you since it sounds that your WiFi card is unblocked.&lt;/p&gt;&#xA;" OwnerUserId="8215" LastActivityDate="2017-01-22T09:57:44.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10294" PostTypeId="2" ParentId="10288" CreationDate="2017-01-22T12:32:13.420" Score="4" Body="&lt;p&gt;It is likely you need to use the &lt;code&gt;wapf&lt;/code&gt; parameter in asus-nb-wmi.  The kernel source code tells us this about wapf&#xA;&lt;pre&gt;&lt;code&gt;/*&#xA; * WAPF defines the behavior of the Fn+Fx wlan key&#xA; * The significance of values is yet to be found, but&#xA; * most of the time:&#xA; * Bit | Bluetooth | WLAN&#xA; *  0  | Hardware  | Hardware&#xA; *  1  | Hardware  | Software&#xA; *  4  | Software  | Software&#xA; */&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using wapf=4 seems to work for most computers with hard block issues and we can apply this with&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options asus-nb-wmi wapf=4&quot; | sudo tee /etc/modprobe.d/asus-nb-wmi.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot and see if wireless works&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-01-22T12:32:13.420" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10297" PostTypeId="2" ParentId="8095" CreationDate="2017-01-22T16:45:11.467" Score="1" Body="&lt;p&gt;After quite some searching I figured out there is no easy way to do this.. But what I do to kind of patch this problem is I use full screen mode (meta+f) which really fullscreens the current app. That together with the use of hot corners available in the behaviour settings of desktop, makes the problem less important, since i usually need fullscreen in the apps I'm working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Personally i have enabled a hot corner to show all windows)&#xA;The way FS mode works is by creating a separate workspace for the specific app, so meta+tab comes handy in stead of alt+tab quite often..&lt;/p&gt;&#xA;" OwnerUserId="8249" LastActivityDate="2017-01-22T16:45:11.467" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10299" PostTypeId="1" CreationDate="2017-01-22T17:58:00.347" Score="1" ViewCount="364" Body="&lt;p&gt;this is my first post.&#xA;I just purchased a Dell notebook that I use with elementary os Loki 0.4 and I have two problems:&#xA;1 - When I use the Chrome browser and Firefox (both updated) I have problems&#xA;with the graphics card (Intel Corporation Broadwell-U Integrated Graphics (rev 09) or Flash (not activated) have not yet understood. The image can be seen flickering in the bars of the instruments of application and browser content. The problem It presents only with browsers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - The Logitech Mouse M171&#xA;&lt;a href=&quot;http://www.logitech.com/it-it/product/m171-wireless-mouse?crid=7&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.logitech.com/it-it/product/m171-wireless-mouse?crid=7&lt;/a&gt;&#xA;It has a strange behavior; is too sensitive and often does the scrooling alone and mouse settings in elementary os does not give me a chance to fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to those who can help me and I apologize to my English Googled.&lt;/p&gt;&#xA;" OwnerUserId="8148" LastActivityDate="2017-06-17T20:57:53.047" Title="Flicker using browser and strange behavior with the mouse" Tags="|hardware|graphics|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10304" PostTypeId="1" CreationDate="2017-01-23T04:37:18.183" Score="1" ViewCount="132" Body="&lt;p&gt;I use Blender and some of the shortcuts are being interfered with by elementary OS. So, I'd like to run Blender on elementary OS on another tty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried this so far, but X won't start:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;startx -display :2 -- :2 vt1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7199" LastEditorUserId="84" LastEditDate="2018-05-06T18:45:16.387" LastActivityDate="2018-05-06T18:45:16.387" Title="How to start a GUI app in another tty" Tags="|keyboard-shortcuts|xorg|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10308" PostTypeId="2" ParentId="10289" CreationDate="2017-01-23T13:18:44.963" Score="1" Body="&lt;p&gt;This may depend on the wifi adapter and its drivers as suggested by the other answer, or it may be a more broad ubuntu 16.04 buggy thing discussed in this askubuntu question: &lt;a href=&quot;https://askubuntu.com/q/762198/47206&quot;&gt;16.04 LTS wifi connection issues&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer that seems to work for me in elementary is this: &lt;a href=&quot;https://askubuntu.com/a/768268/47206&quot;&gt;https://askubuntu.com/a/768268/47206&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it says is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Get details of your PCI wireless card by running &lt;code&gt;sudo lshw -class network&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Get your card model info according to the product line. For something like &lt;code&gt;RTL8723BE PCIe Wireless Network Adapter&lt;/code&gt;, the model of the card is &lt;code&gt;RTL8723BE&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open or create &lt;code&gt;/etc/pm/config.d/config&lt;/code&gt; and add &lt;code&gt;SUSPEND_MODULES=&quot;rtl8723be&quot;&lt;/code&gt;(replace &lt;code&gt;rtl8723be&lt;/code&gt; with your own model number) Then run &lt;code&gt;echo &quot;options rtl8723be fwlps=N&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&lt;/code&gt; and reboot.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work, one can, as an emergency solution, restart the network manager with &lt;code&gt;service network-manager restart&lt;/code&gt;. I find it easier to use the command &lt;code&gt;bash -c 'service network-manager restart'&lt;/code&gt; with a shortcut or launcher.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-01-23T13:24:02.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10309" PostTypeId="2" ParentId="10299" CreationDate="2017-01-23T13:33:36.347" Score="1" Body="&lt;p&gt;SOLUTION: I was able to find a fix for this. It was weeks ago so I had to research again to find the command. Basically it seems to be related to the Intel graphics drivers on the Dell machines. I believe the command I ran was &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get purge intel-linux-graphics-installer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if that works for you.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I have the same issue (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10191/epiphany-weird-glitching-and-corrupt-fullscreen-video&quot;&gt;Epiphany - Weird glitching and corrupt fullscreen video&lt;/a&gt;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have notified Daniel and Cassidy but I don't think they have been able to reproduce it. I am also on a Dell, i7579 with a Kaby Lake i5. Though I am only having problems in ephiphany and it's only after I update. On a fresh install it does not happen. It seems to be related to the mouse from what I can tell. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I posted a video, let me know if this is the same issue you are having...&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=KmqXNP1BJ84&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=KmqXNP1BJ84&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-22T23:01:01.143" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10310" PostTypeId="1" AcceptedAnswerId="10334" CreationDate="2017-01-23T13:54:57.660" Score="1" ViewCount="1496" Body="&lt;p&gt;Is there an argument that would start the terminal with a certain window size - like the &lt;code&gt;geometry&lt;/code&gt; argument (&lt;code&gt;-geometry&lt;/code&gt; in xterm, &lt;code&gt;--geometry=&lt;/code&gt; in &lt;strong&gt;Terminator&lt;/strong&gt; and &lt;code&gt;--geometry&lt;/code&gt; in &lt;strong&gt;Gnome Terminal&lt;/strong&gt;) when I run a command that needs a very small window?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;~ I want to use a shortcut to run the command &lt;code&gt;scrot -s -d 5 -c&lt;/code&gt; and I need to run it in terminal. It will capture a region with a delay of 5 seconds while displaying a countdown; the window shouldn't be in the way, so it would be better to make it very small in such a case, while keeping the normal size of the terminal for other purposes. I know how to use for this the other mentioned terminals, I was wandering if I could use the default one.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-01-24T09:57:43.903" LastActivityDate="2017-08-16T20:48:44.557" Title="Command to start Pantheon-Terminal with custom window size" Tags="|pantheon-terminal|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10311" PostTypeId="1" AcceptedAnswerId="12531" CreationDate="2017-01-23T14:18:08.290" Score="2" ViewCount="2514" Body="&lt;p&gt;I need to test epiphany without hardware acceleration to see if it is the culprit for the graphical glitches I'm experiencing in epiphany. Is this possible? It doesn't appear in the main setting menu. Maybe in a hidden menu similar to Firefox's about:config?&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2020-09-25T13:30:55.150" Title="How can I turn off hardware acceleration in epiphany?" Tags="|hardware|epiphany|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10312" PostTypeId="2" ParentId="8511" CreationDate="2017-01-23T15:43:12.060" Score="1" Body="&lt;p&gt;According to this...&lt;a href=&quot;https://blogs.gnome.org/mcatanzaro/2016/09/19/epiphany-3-22-and-a-couple-new-stable-releases-too/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blogs.gnome.org/mcatanzaro/2016/09/19/epiphany-3-22-and-a-couple-new-stable-releases-too/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the Gnome team has recommended elementary upgrade to 3.18.8. So far, no update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try running synaptic package manager and check for newer versions. Though these will not have the elementary visual integration.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-23T15:43:12.060" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10314" PostTypeId="2" ParentId="10310" CreationDate="2017-01-23T18:53:17.860" Score="1" Body="&lt;p&gt;Install &lt;code&gt;sudo apt-get install dconf-tools&lt;/code&gt;and run it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then go to &lt;em&gt;org&gt;pantheon&gt;terminal&gt;settings&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find here settings for windows width and height and set it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want, you can change other preferences. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-01-23T18:53:17.860" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10319" PostTypeId="1" CreationDate="2017-01-24T00:52:54.500" Score="2" ViewCount="1233" Body="&lt;p&gt;I just want to display the hour, because It looks more clean, this option was removed and I can't find a way to just hide the day/date from the options, even elemetary-tweaks cant do that, do you guys know where is the file that contains the code of this ?, maybe I can change it by myself&lt;/p&gt;&#xA;" OwnerUserId="8272" LastActivityDate="2020-03-31T06:35:21.457" Title="How to hide date in elementary top bar?" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10320" PostTypeId="2" ParentId="10287" CreationDate="2017-01-24T01:02:07.127" Score="1" Body="&lt;p&gt;plz reformat the external after doing all of this , the drive is a mess, &#xA;Looks like your computer is new, the other partitions are important for windows so don't touch them, and guess what ,if you remove the 20GB partition from your OEM you loose your chance to restore Windows and the licence is something that you might want to save, all the files that are in that partition is just for recovery if windows is damaged, so don't erase it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;first of all, make a backup of all..&#xA;then enter to windows and (press [windows key] + S) search &quot;Disk manager&quot; then you will se a lot of ... blue blocks, every block represent a partition, just delete ubuntu and the swap file(you will notice that easily because of sizes), and be sure that the block turns Black(only works if its black), if its green erease it again and it will turn black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after reboot you will se a grub error or something, dont be scared is just some rubish that persists in your disk because of ubuntu's grub, insert the media/pendrive, reboot and press F12 as fast as posible when you look the OEM laptop's logo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;install elementary as always, then where finished you're able to dualboot windows and eos.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="8272" LastEditDate="2017-01-24T01:13:34.257" LastActivityDate="2017-01-24T01:13:34.257" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10321" PostTypeId="1" CreationDate="2017-01-24T02:11:29.697" Score="2" ViewCount="1538" Body="&lt;p&gt;Can I install Linux 4.9 Kernel in elementary OS 0.4 that supports &lt;em&gt;&lt;strong&gt;bfq&lt;/strong&gt;&lt;/em&gt; disk I/O scheduler??? If possible, can you please point me to that repo or guide??&lt;/p&gt;&#xA;" OwnerUserId="8274" LastEditorUserId="8274" LastEditDate="2017-01-24T10:30:58.973" LastActivityDate="2017-01-24T13:32:52.327" Title="Can I install Linux 4.9 kernel?" Tags="|kernel|" AnswerCount="3" CommentCount="0" ClosedDate="2017-01-24T19:35:14.483" ContentLicense="CC BY-SA 3.0" />
  <row Id="10322" PostTypeId="2" ParentId="10227" CreationDate="2017-01-24T05:22:47.310" Score="1" Body="&lt;p&gt;Add &lt;code&gt;XDG_DOWNLOAD_DIR=&quot;$HOME/Downloads&quot;&lt;/code&gt; to &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Note &lt;code&gt;DOWNLOAD&lt;/code&gt; is not plural, it's the only one that isn't...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run &lt;code&gt;xdg-user-dirs-update&lt;/code&gt;, and the folder should have the correct icon.&lt;/p&gt;&#xA;" OwnerUserId="8275" LastActivityDate="2017-01-24T05:22:47.310" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10323" PostTypeId="2" ParentId="10321" CreationDate="2017-01-24T06:53:46.127" Score="-3" Body="&lt;p&gt;i would say-you could install 4.9 kernel - yet Eos loki´s important drivers won´t match that kernel. I have already tested it.  But you are free to experiment. Look in around and you will find how to. &lt;/p&gt;&#xA;" OwnerUserId="7633" LastActivityDate="2017-01-24T06:53:46.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10324" PostTypeId="2" ParentId="10321" CreationDate="2017-01-24T07:21:55.633" Score="1" Body="&lt;p&gt;Yes, you can. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu produces &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/MainlineBuilds&quot; rel=&quot;nofollow noreferrer&quot;&gt;mainline kernel builds&lt;/a&gt; packaged as .debs for easy installation. For example, here's &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9/&quot; rel=&quot;nofollow noreferrer&quot;&gt;4.9&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your system is 64-bit (like most new-ish computers), you would go to the &quot;amd64&quot; section and download three files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;linux-headers-4.9.0-040900_4.9.0-040900.201612111631_&lt;strong&gt;all&lt;/strong&gt;.deb  &lt;/li&gt;&#xA;&lt;li&gt;linux-headers-4.9.0-040900-&lt;strong&gt;generic&lt;/strong&gt;_4.9.0-040900.201612111631_amd64.deb&lt;/li&gt;&#xA;&lt;li&gt;linux-image-4.9.0-040900-&lt;strong&gt;generic&lt;/strong&gt;_4.9.0-040900.201612111631_amd64.deb&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If you put them in one folder, you can install them all at once with &lt;code&gt;sudo dpkg -i *.deb&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to &lt;a href=&quot;https://askubuntu.com/questions/16042/how-to-get-to-the-grub-menu-at-boot-time&quot;&gt;boot into GRUB&lt;/a&gt;, select &quot;Advanced options for elementary OS&quot;, and choose the kernel version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: an upstream kernel might not work out of the box, depending on your hardware! Don't be surprised if it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="3222" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-01-24T07:21:55.633" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10327" PostTypeId="1" CreationDate="2017-01-24T09:35:25.537" Score="1" ViewCount="417" Body="&lt;p&gt;Can I upgrade the elementary's ubuntu base to Ubuntu 16.10??&#xA;Will it be safe to do???&lt;/p&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-02-23T18:28:53.500" Title="Can I upgrade the elementary's ubuntu base to Ubuntu 16.10?" Tags="|release-loki|ubuntu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10328" PostTypeId="2" ParentId="10327" CreationDate="2017-01-24T10:19:45.080" Score="1" Body="&lt;p&gt;&lt;strong&gt;TL;DR: Yes you can. No you shouldn't.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually this is not exactly the same as &quot;converting an Ubuntu installation to elementary OS&quot; which results in a kind of Pantheon Desktop Environment-on-Ubuntu, the result of upgrading would be something like that as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cf. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/241/can-i-convert-a-ubuntu-installation-to-an-elementary-installation&quot;&gt;Can I &amp;quot;convert&amp;quot; a Ubuntu installation to an elementary installation?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;So even if globally this kind of upgrade should be &quot;safe&quot;, some bugs and glitches are likely to appear, so I would advise against it.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-23T18:28:53.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10329" PostTypeId="2" ParentId="7529" CreationDate="2017-01-24T10:27:25.203" Score="1" Body="&lt;p&gt;I am also on Freya and when I installed it in my Ubuntu 16.04, It worked fine. I didn't installed the Guest Additions, so try to remove them. And when I installed I used 2 CPUs. So also increase CPU count.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My host info:&lt;br&gt;&#xA;CPU: i3-5005U @ 2.00GHz&lt;br&gt;&#xA;RAM: 3.8 GiB  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My VM info:&lt;br&gt;&#xA;CPU: 2 CPUs, no execution cap.&lt;br&gt;&#xA;RAM: 1.9GB&lt;br&gt;&#xA;VRAM: 128MB  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps!!&lt;/p&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-01-24T10:27:25.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10331" PostTypeId="2" ParentId="10319" CreationDate="2017-01-24T10:35:16.923" Score="1" Body="&lt;p&gt;You can download the indicator source with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt source wingpanel-indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would start at the source file &lt;code&gt;src/Widgets/PanelLabel.vala&lt;/code&gt;: it seems that removing (all occurences of) the &lt;code&gt;date_label&lt;/code&gt; variable does the trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you can build and  install the package&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;debuild -us -uc&#xA;sudo dpkg --install ../wingpanel-indicator-datetime*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-01-25T09:37:19.080" LastActivityDate="2017-01-25T09:37:19.080" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10332" PostTypeId="2" ParentId="10310" CreationDate="2017-01-24T11:11:56.777" Score="2" Body="&lt;p&gt;You can change the dconf settings just before opening the terminal like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.saved-state window-width 400;&#xA;gsettings set org.pantheon.terminal.saved-state window-height 400;&#xA;pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There are also opening-x and opening-y properties you can change that you might find useful.&lt;/p&gt;&#xA;" OwnerUserId="8277" LastActivityDate="2017-01-24T11:11:56.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10334" PostTypeId="2" ParentId="10310" CreationDate="2017-01-24T11:32:50.540" Score="1" Body="&lt;p&gt;There is no command line switch to support this in &lt;code&gt;pantheon-terminal&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to try the workaround as suggested in the other answers, however, it might not always work as expected if other terminal windows are open as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pantheon-terminal-width-height&lt;/code&gt; script (use &lt;code&gt;pantheon-terminal-width-height WIDTH HEIGHT&lt;/code&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;NEW_WIDTH=$1&#xA;NEW_HEIGHT=$2    &#xA;OLD_WIDTH=$(gsettings get org.pantheon.terminal.saved-state window-width)&#xA;OLD_HEIGHT=$(gsettings get org.pantheon.terminal.saved-state window-height)    &#xA;gsettings set org.pantheon.terminal.saved-state window-width $NEW_WIDTH&#xA;gsettings set org.pantheon.terminal.saved-state window-height $NEW_HEIGHT&#xA;pantheon-terminal &amp;amp;&#xA;sleep 1&#xA;gsettings set org.pantheon.terminal.saved-state window-width $OLD_WIDTH&#xA;gsettings set org.pantheon.terminal.saved-state window-height $OLD_HEIGHT&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-24T11:32:50.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10335" PostTypeId="2" ParentId="10321" CreationDate="2017-01-24T11:51:42.410" Score="0" Body="&lt;p&gt;Yes you can install 4.9, or any other for that matter...keep in mind you could run into issues with a different kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-add-repository -y ppa:teejee2008/ppa&#xA;sudo apt update&#xA;sudo apt-get install ukuu&#xA;ukuu-gtk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;choose your kernel &gt; install&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source:&lt;a href=&quot;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-01-24T13:32:52.327" LastActivityDate="2017-01-24T13:32:52.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10336" PostTypeId="1" AcceptedAnswerId="10708" CreationDate="2017-01-24T12:03:11.750" Score="1" ViewCount="166" Body="&lt;p&gt;The built-in music player is elementary OS works in a weird manner. I copied few albums in the default folder, Music but since then I can not get rid of any. There is no delete option in Noise and if I just remove it from the folder it still appears in Noise. How can I delete not wanted contents anyway?&lt;/p&gt;&#xA;" OwnerUserId="6573" LastEditorUserId="308" LastEditDate="2018-08-07T18:20:26.323" LastActivityDate="2018-08-07T18:20:26.323" Title="Delete albums/files in Noise" Tags="|release-loki|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10337" PostTypeId="1" AcceptedAnswerId="10409" CreationDate="2017-01-24T12:41:12.250" Score="2" ViewCount="1267" Body="&lt;p&gt;Last Friday I downloaded Loki from the officail elementary website. (And yes I paid a little for it :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I can't install it. Booting from the USB stick takes forever. (Well, ok, I have stopped it after looking at the nice elementary logo for more than 15 minutes.)&#xA;Here is what I have tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install (2 times)&lt;/li&gt;&#xA;&lt;li&gt;try elementary OS (5 times) &lt;/li&gt;&#xA;&lt;li&gt;used a different USB stick&lt;/li&gt;&#xA;&lt;li&gt;took the checksum (which was identical to the one on the web site)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Anything else worth trying?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some research I found out how to show good old boot messages.&#xA;Have a look at the screen photo for details.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rszTp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rszTp.jpg&quot; alt=&quot;Log Messages&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8279" LastEditorUserId="8279" LastEditDate="2017-01-24T15:17:50.207" LastActivityDate="2017-02-10T11:12:57.317" Title="Can't install from iso image" Tags="|release-loki|system-installation|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10338" PostTypeId="1" CreationDate="2017-01-24T14:03:14.153" Score="1" ViewCount="657" Body="&lt;p&gt;I am trying to run the first sample code on &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/GTKSample?highlight=%28%5CbVala%2FExamples%5Cb%29&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; site. Unfortunately I got the following error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package gobject-2.0 was not found in the pkg-config search path.&#xA;Perhaps you should add the directory containing `gobject-2.0.pc'&#xA;to the PKG_CONFIG_PATH environment variable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I used &lt;code&gt;locate gobject-2.0.pc&lt;/code&gt; to find its location and added&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export PKG_CONFIG_PATH=&quot;/usr/lib/x86_64-linux-gnu/pkgconfig:PKG_CONFIG_PATH&quot;`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;at the end of my &lt;code&gt;~/.bashrc&lt;/code&gt;. Now I get the following error message when I try to compile the vala code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/path/to/foo.vala.c:9:21: fatal error: gtk/gtk.h: No such file or directory&#xA;compilation terminated.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found a &lt;code&gt;gtk.h&lt;/code&gt; in &lt;code&gt;/usr/include/gtk-3.0/gtk&lt;/code&gt;, but the compiler can't find it apparently. I also noticed that &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ pkg-config --cflags gtk+-3.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;yields &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package xproto was not found in the pkg-config search path.&#xA;Perhaps you should add the directory containing `xproto.pc'&#xA;to the PKG_CONFIG_PATH environment variable&#xA;Package 'xproto', required by 'xau', not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;although &lt;code&gt;xproto.pc&lt;/code&gt; is in &lt;code&gt;/usr/share/pkgconfig&lt;/code&gt; and the pkg-config man-page lists this as one of standard search paths of pkg-config.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;On the other hand &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ pkg-config --libs gtk+-3.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;yields&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-L/usr/lib/x86_64-linux-gnu -lgtk-3 -lgdk-3 -lpangocairo-1.0 -lpango-1.0 -latk-1.0 -lcairo-gobject -lcairo -lgdk_pixbuf-2.0 -lgio-2.0 -lgobject-2.0 -lglib-2.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which looks as one would expect.&#xA;/Edit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me with this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="7842" LastEditorUserId="7842" LastEditDate="2017-01-24T16:44:08.123" LastActivityDate="2019-12-08T10:26:50.613" Title="Can't find gtk header file for vala-code compilation" Tags="|gtk|vala|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10339" PostTypeId="2" ParentId="9967" CreationDate="2017-01-24T16:34:18.713" Score="0" Body="&lt;p&gt;A word of warning, Budgie and Pantheon don't play nice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Budgie desktop the same way as you did, on EOS Loki, and it was great, I loved it, but when I signed into pantheon things got screwy. I couldn't open pantheon-files, there was no wifi connectivity, the themes and icons changed and I couldn't change them back. And when I tried to shut down it wouldn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it's my machine, or one of my applications, I don't know. If you have similar problems there is a method to remove Budgie detailed at the end of this page: &lt;a href=&quot;https://www.ostechnix.com/install-budgie-desktop-ubuntu-16-04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;install-budgie-desktop-ubuntu-16-04-lts&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2017-01-24T16:34:18.713" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10341" PostTypeId="1" CreationDate="2017-01-24T19:17:29.317" Score="1" ViewCount="166" Body="&lt;p&gt;When not touched for long elementary OS goes black with a small underscore at top left corner &amp;amp; when pressed any key pc doesn't wake up&lt;/p&gt;&#xA;" OwnerUserId="3983" LastEditorUserId="16827" LastEditDate="2019-01-08T19:09:55.560" LastActivityDate="2019-01-08T19:09:55.560" Title="Elementary os goes black when not touched for long" Tags="|release-loki|power|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="10343" PostTypeId="1" CreationDate="2017-01-24T21:23:57.713" Score="0" ViewCount="368" Body="&lt;p&gt;I have set up a VPN according to the instructions of my provider, but at random times the connection disappears from the VPN list in network settings. Its still there in the &quot;edit connections&quot; list. This usually happens after coming back from sleep mode, because thats when the connection gets canceled. Also it seems to reappear at rondom times...&lt;/p&gt;&#xA;" OwnerUserId="8000" LastActivityDate="2017-07-08T07:56:22.260" Title="VPN Connection disappear" Tags="|vpn|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10344" PostTypeId="1" AcceptedAnswerId="10349" CreationDate="2017-01-24T23:23:10.803" Score="0" ViewCount="616" Body="&lt;p&gt;I would like to be able to have an option in the default file manager to run an executable file in terminal like I have in KDE/Dolphin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is useful in order to see the output (that could be temperature, countdown, etc...) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know how to create contract files, but what I need is the line starting with &lt;code&gt;Exec=&lt;/code&gt;, namely I need to know what terminal to use and with what arguments.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-01-24T23:32:19.090" LastActivityDate="2017-01-25T10:32:34.433" Title="Pantheon Files context menu (contract) to run script in terminal" Tags="|release-loki|pantheon-files|contract|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10345" PostTypeId="1" AcceptedAnswerId="10348" CreationDate="2017-01-24T23:31:27.767" Score="1" ViewCount="719" Body="&lt;p&gt;Looking for this, that's not much to see:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; pantheon-terminal --help-all&#xA;[INFO 00:19:24.537835] Application.vala:155: Terminal version: 0.4.0.3&#xA;[INFO 00:19:24.537996] Application.vala:157: Kernel version: 4.4.0-57-generic&#xA;[DEBUG 00:19:24.541766] Settings.vala:163: Loading settings from schema 'org.pantheon.terminal.saved-state'&#xA;[DEBUG 00:19:24.545045] Settings.vala:163: Loading settings from schema 'org.pantheon.terminal.settings'&#xA;Usage:&#xA;  pantheon-terminal [OPTION...] &#xA;&#xA;Help Options:&#xA;  -h, --help               Show help options&#xA;  --help-all               Show all help options&#xA;  --help-gtk               Show GTK+ Options&#xA;&#xA;GTK+ Options&#xA;  --class=CLASS            Program class as used by the window manager&#xA;  --name=NAME              Program name as used by the window manager&#xA;  --gdk-debug=FLAGS        GDK debugging flags to set&#xA;  --gdk-no-debug=FLAGS     GDK debugging flags to unset&#xA;  --gtk-module=MODULES     Load additional GTK+ modules&#xA;  --g-fatal-warnings       Make all warnings fatal&#xA;  --gtk-debug=FLAGS        GTK+ debugging flags to set&#xA;  --gtk-no-debug=FLAGS     GTK+ debugging flags to unset&#xA;&#xA;Application Options:&#xA;  -d, --debug              Enable debug logging&#xA;  -a, --about              Show About dialog&#xA;  --display=DISPLAY        X display to use&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;--help-all&lt;/code&gt; usually shows much more information in a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found on internet many options mentioned with the default terminal and at least &lt;code&gt;-e&lt;/code&gt; works but is not mentioned. There must be others, but where to find about them?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-01-25T09:32:21.450" Title="Where to find about arguments/options of Pantheon Terminal?" Tags="|release-loki|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10346" PostTypeId="1" CreationDate="2017-01-25T02:57:28.590" Score="0" ViewCount="2014" Body="&lt;p&gt;I would like to be able to connect to my Loki desktop remotely. I have installed x11vnc but as soon as there is no display connected I can no longer access my desktop from the remote machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure what info is required to help anyone answer my question, but feel free to ask anything of me that may help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, DM!&lt;/p&gt;&#xA;" OwnerUserId="8285" LastEditorUserId="578" LastEditDate="2017-01-25T05:41:05.910" LastActivityDate="2020-03-03T21:47:51.677" Title="How to access desktop on a headless Loki machine" Tags="|release-loki|vnc|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10347" PostTypeId="1" AcceptedAnswerId="10362" CreationDate="2017-01-25T09:14:50.307" Score="4" ViewCount="767" Body="&lt;p&gt;On Loki with latest updates. I used to get the normal dialog which prompts for your password on the first attempt and then keeps the key unlocked, however for some reason this no longer works. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Enter passphrase for key '/home/stan/.ssh/id_rsa':&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ssh-agent&lt;/code&gt; is running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: To be clear, not sure exactly when/after what event it started happening, I don't think it has anything to do with OS updates. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Updates&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My &lt;code&gt;/etc/X11/Xsession.d&lt;/code&gt; directory&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00upstart                       55numlockx                70im-config_launch      95dbus_update-activation-env&#xA;20x11-common_process-args       60x11-common_localhost    75dbus_dbus-launch      99upstart&#xA;30x11-common_xresources         60x11-common_xdg_path     90atk-adaptor           99x11-common_start&#xA;35x11-common_xhost-local        60xbrlapi                 90gpg-agent&#xA;40x11-common_xsessionrc         60xdg-user-dirs-update    90qt-a11y&#xA;50x11-common_determine-startup  70gconfd_path-on-session  90x11-common_ssh-agent&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Strangely, &lt;code&gt;gnome-keyring-d&lt;/code&gt; has two running instances:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;2543 ?        00:00:19 gnome-keyring-d&#xA;10165 ?        00:00:00 gnome-keyring-d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8287" LastEditorUserId="8291" LastEditDate="2017-01-26T11:47:48.593" LastActivityDate="2017-08-17T21:04:29.410" Title="Private SSH key with password no longer stays unlocked for session" Tags="|keyring|ssh|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10348" PostTypeId="2" ParentId="10345" CreationDate="2017-01-25T09:32:21.450" Score="1" Body="&lt;p&gt;There is a handy manpage for Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ man pantheon-terminal&#xA;&#xA;NAME&#xA;       pantheon-terminal - Modern terminal emulator from elementary project&#xA;&#xA;       Pantheon  Terminal  is  a  beautiful and simple terminal emulator.  It's designed to be set up with sane&#xA;       defaults and little to no configuration and follows the elementary OS Human Interface Guidelines.&#xA;&#xA;SYNOPSIS&#xA;       pantheon-terminal [OPTION...]&#xA;&#xA;OPTIONS&#xA;       -h, --help&#xA;              Show help message and exit&#xA;&#xA;       -v, --version&#xA;              Print version info and exit&#xA;&#xA;       -e, --execute=PATH&#xA;              Execute the specified binary with given parameters in terminal.&#xA;&#xA;       -w, --working-directory=PATH&#xA;              Set the specified directory as shell working directory on startup&#xA;&#xA;AUTHOR&#xA;       Pantheon Terminal was written by Adrien Plazas &amp;lt;kekun.plazas@laposte.net&amp;gt;, Mario  Guerriero  &amp;lt;mario@ele‐&#xA;       mentaryos.org&amp;gt;,  David  Gomes  &amp;lt;david@elementaryos.org&amp;gt;,  Tom  Beckmann  &amp;lt;tom@elementaryos.org&amp;gt;,  Akshay&#xA;       Shekher &amp;lt;akshay@elementaryos.org&amp;gt; et al.&#xA;&#xA;       This manual page was written by Sergey &quot;Shnatsel&quot; Davidoff  &amp;lt;sergey@elementaryos.org&amp;gt;,  for  the  Debian&#xA;       project (but may be used by others).&#xA;&#xA;                                                  May 29, 2014                             pantheon-terminal(1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-25T09:32:21.450" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10349" PostTypeId="2" ParentId="10344" CreationDate="2017-01-25T10:04:00.107" Score="1" Body="&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/run_in_terminal.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Run in terminal&#xA;Icon=terminal&#xA;MimeType=application/x-sh;application/x-executable;&#xA;Exec=pantheon-terminal -e %f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Not any file can be run like this, the selected file has to be a proper executable script.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-01-25T10:32:34.433" LastActivityDate="2017-01-25T10:32:34.433" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10350" PostTypeId="2" ParentId="4757" CreationDate="2017-01-25T10:16:00.413" Score="0" Body="&lt;p&gt;Open dconf editor, there are several places to look. For me the setting I needed to change was found at &lt;code&gt;org/gnome/session&lt;/code&gt; and was called &lt;code&gt;idle-delay&lt;/code&gt;. Hope this helps :)&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2017-01-25T10:16:00.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10351" PostTypeId="1" AcceptedAnswerId="10352" CreationDate="2017-01-25T10:43:47.800" Score="2" ViewCount="579" Body="&lt;p&gt;I know this can be done under the file's Properties or with the command &lt;code&gt;sudo chmod a+x&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how to add it to context menu?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-01-25T10:46:31.540" LastActivityDate="2020-03-09T12:43:40.827" Title="How to make file executable from context menu?" Tags="|files|file-management|contract|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10352" PostTypeId="2" ParentId="10351" CreationDate="2017-01-25T10:46:02.630" Score="2" Body="&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/make_executable.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Make executable&#xA;MimeType=text/plain&#xA;Exec=pantheon-terminal -e 'sudo chmod a+x %f'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This form also works:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Make executable&#xA;MimeType=text/plain&#xA;Exec=pkexec chmod a+x %f&#xA;Terminal=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="29" LastEditDate="2020-03-09T12:43:40.827" LastActivityDate="2020-03-09T12:43:40.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10353" PostTypeId="2" ParentId="8408" CreationDate="2017-01-25T11:19:32.393" Score="2" Body="&lt;p&gt;Try installing &lt;code&gt;gtk2-engines-pixbuf&lt;/code&gt; and moving the Ark-OSX folder to &lt;code&gt;/usr/share/themes&lt;/code&gt; if it isn’t saved there yet, that fixed it for me.&lt;/p&gt;&#xA;" OwnerUserId="8289" LastActivityDate="2017-01-25T11:19:32.393" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10354" PostTypeId="1" AcceptedAnswerId="10375" CreationDate="2017-01-25T11:36:48.480" Score="11" ViewCount="3182" Body="&lt;p&gt;when I write my password on terminal for sudo command, it gives me writing feedback even if I didn't modify the sudoers file. How can I fix this? This is my situation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oHoY7.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oHoY7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8290" LastEditorUserId="578" LastEditDate="2017-01-26T16:44:05.710" LastActivityDate="2017-01-26T16:44:05.710" Title="How to disable terminal feedback when writing password for sudo?" Tags="|sudo|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10355" PostTypeId="1" CreationDate="2017-01-25T12:25:03.030" Score="1" ViewCount="274" Body="&lt;p&gt;can anyone explain to me what I need to do in order to change the styles of a gtk application?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example I want to keep the elementary gtk theme but change a detail here and there so I go to &lt;code&gt;/usr/share/themes/elementary/gtk-3.0&lt;/code&gt; and look at the .css files. I know a little about css so I expect no problems there. But how do I know which elements have a given class and vice versa? So if I want to change the appearance of let's say the icon in &lt;em&gt;greeter&lt;/em&gt; how do I know how to access that element in css?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="7842" LastActivityDate="2017-01-25T12:25:03.030" Title="How do I change app styles?" Tags="|gtk|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10356" PostTypeId="1" AcceptedAnswerId="10621" CreationDate="2017-01-25T12:34:17.290" Score="1" ViewCount="64" Body="&lt;p&gt;Currently, a single click on a link will open it in your browser. Sometimes I have many links on the terminal and would prefer to have to press &lt;code&gt;ctrl&lt;/code&gt;+click to open a link.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't look like it's possible from looking in &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8287" LastEditorUserId="578" LastEditDate="2017-02-08T12:59:07.293" LastActivityDate="2017-02-08T13:02:30.933" Title="Can I prevent pantheon-terminal from opening links unless ctrl is pressed?" Tags="|pantheon-terminal|keyboard-shortcuts|pantheon|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10357" PostTypeId="1" AcceptedAnswerId="10360" CreationDate="2017-01-25T12:42:16.927" Score="0" ViewCount="827" Body="&lt;p&gt;I'm using Elementary OS 0.4 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I start the laptop in the morning (the laptop is cold), if i run sensors 36° Celsius. After some time, if i open a browser, the speed fan gets to 2000 rpm and the temperature of the cpu is always between 45-50-55 Celsius (2500-2800 rpm). It's normal? It can be a overheating issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;CPU model: Intel core i5-3317u&lt;/p&gt;&#xA;" OwnerUserId="8068" LastActivityDate="2017-01-25T15:11:46.007" Title="Is the CPu temperature of my laptop normal -&gt; possible overheating" Tags="|release-loki|cpu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10358" PostTypeId="2" ParentId="4256" CreationDate="2017-01-25T13:45:53.847" Score="1" Body="&lt;h3&gt;The executable scripts will be always executed in Pantheon Files when clicked, no matter the application  set as default for that type of files. (bug report: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1669996&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1669996&lt;/a&gt;).&lt;/h3&gt;&#xA;&lt;p&gt;A solution for what is asked (&lt;em&gt;&lt;strong&gt;avoiding to start scripts when accidentally clicking them&lt;/strong&gt;&lt;/em&gt;), as suggested in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4277/170&quot;&gt;the answer on Nautilus&lt;/a&gt;, is to &lt;strong&gt;use another file manager which has the desired option when manipulating those scripts&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Creating a &lt;code&gt;run_zenity.sh&lt;/code&gt; with the script from the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4271/170&quot;&gt;answer on Zenity&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;zenity --question --text=&amp;quot;Do you wish to run '$1', or display its contents?&amp;quot; \&#xA;       --ok-label=Run \&#xA;       --cancel-label=Edit&#xA;&#xA;case $? in&#xA;    0)pcmanfm &amp;quot;$1&amp;quot;&#xA;    ;;&#xA;    1)scratch-text-editor $1&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and a contract file for that&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/runoredit-zenity.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with a content like&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=RUN OR EDIT&#xA;Icon=terminal&#xA;MimeType=application/x-sh;application/x-executable;&#xA;Exec=bash -c '/path/to/the/script/run_zenity.sh %f' &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;you will get a new context menu in Pantheon Files; but that is not very useful, as it only provides options that are already provided by the &lt;em&gt;Run&lt;/em&gt; and &lt;em&gt;Open with&lt;/em&gt; entry.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MyZpt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MyZpt.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Anyway, that entry opens the Zenity dialog, which works as expected:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9aLHJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9aLHJ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The zenity dialog script can be added to a &lt;code&gt;desktop&lt;/code&gt; file (a launcher in &lt;code&gt;~/.local/share/applications&lt;/code&gt;), and the launcher can be set the default 'application' to be used for all executable scripts in Pantheon Files (so that it shows that dialog and avoid the risk of executing the scripts by accident), but no matter that setting &lt;em&gt;Pantheon File will always execute a file if it is an executable file. On the other hand that works ok for &lt;code&gt;.desktop&lt;/code&gt; files&lt;/em&gt;. (See more on that &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10955/170&quot;&gt;HERE&lt;/a&gt; and below for Thunar).&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;So, considering other file managers:&lt;/p&gt;&#xA;&lt;h2&gt;PCManFM&lt;/h2&gt;&#xA;&lt;p&gt;Beside Nautilus already mentioned, an even lighter File Manager, PCManFM provides this by default.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sJIq9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sJIq9.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;'Open' will use the default application.&lt;/p&gt;&#xA;&lt;p&gt;That can be changed in settings&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wV2I3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wV2I3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;Thunar&lt;/h2&gt;&#xA;&lt;p&gt;Unlike PCManFM, Thunar file manager doesn't seem to have that dialog for executable files, but &lt;strong&gt;in Thunar the Zenity script can be made the default application for scripts&lt;/strong&gt; as indicated, and then, &lt;strong&gt;when clicking a script  in Thunar the Zenity dialog will appear&lt;/strong&gt;. For that, create a &lt;code&gt;desktop&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/run-or-edit.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Run or edit&#xA;Icon=gedit&#xA;Categories=Utility;TextEditor;&#xA;MimeType=application/x-sh;application/x-executable;&#xA;Exec=bash -c '/path/to/the/script/run_zenity.sh %f' &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, no matter the file manager, set the new &amp;quot;application&amp;quot; called &lt;em&gt;&lt;strong&gt;Run or edit&lt;/strong&gt;&lt;/em&gt; the default for script files under a file's properties.&lt;/p&gt;&#xA;&lt;p&gt;As said, in Pantheon Files that changes nothing, but in Thunar it will open the Zenity dialog when clicking to open a script.&lt;/p&gt;&#xA;&lt;p&gt;To be sure the &lt;em&gt;&lt;strong&gt;Run or edit&lt;/strong&gt;&lt;/em&gt; app appears in the list when you try to set is as default, you can add these lines&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;application/x-sh=run-or-edit.desktop&#xA;application/x-executable=run-or-edit.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;in &lt;code&gt;~/.local/share/applications/mimeinfo.cache&lt;/code&gt; under &lt;code&gt;[MIME CACHE]&lt;/code&gt;&#xA;and also in &lt;code&gt;~/.local/share/applications/mimeapps.list&lt;/code&gt; under &lt;code&gt;[Default Applications]&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;There are a few glitches with that Zenity script: after the dialog is displayed, dismissing it with &lt;kbd&gt;Esc&lt;/kbd&gt; or the window close button (x) will still open the file in the text editor. (As it is a 'yes or no' dialog, 'no' is  the text editor.) To improve that behavior look &lt;a href=&quot;https://askubuntu.com/q/888840/47206&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-07T09:37:51.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10360" PostTypeId="2" ParentId="10357" CreationDate="2017-01-25T15:11:46.007" Score="0" Body="&lt;p&gt;I think it's a normal temperature if you are watching a video or a resource intensive website. Anyway, I recommend you to install tlp (&lt;code&gt;sudo apt install tlp&lt;/code&gt;) because this app is going to help with your issue. TLP is basically a daemon that monitors different sensors and is able to modify hardware settings so that your system becomes more efficient (and makes the temperatures lower).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you install it, do &lt;code&gt;sudo tlp start&lt;/code&gt; to start it and &lt;code&gt;sudo tlp-stat&lt;/code&gt; to see the current settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To lower the temperatures, the best thing you can do is apply the settings below, run the first command and check if your settings are the same. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the output is different you can change the settings with &lt;code&gt;sudo pantheon-text-editor /etc/default/tlp&lt;/code&gt;. Don't forget to start tlp again to apply the new settings.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo tlp-stat -p &#xA;&#xA;scaling_driver = intel_pstate&#xA;scaling_governor = powersave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, this other settings you have to change them in &lt;code&gt;/etc/default/grub&lt;/code&gt; . After that, run &lt;code&gt;sudo update-grub&lt;/code&gt; and reboot. Some of the following may not be available so just change the ones that are.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo tlp-stat | grep /sys/module/i915/parameters/&#xA;&#xA;/sys/module/i915/parameters/powersave        =  1 &#xA;/sys/module/i915/parameters/enable_rc6       =  anything between 3-7 **&#xA;/sys/module/i915/parameters/enable_fbc       =  0 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;** 7 is the most agressive and may make your videos stutter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's all. If it's necessary i can provide more explanations as to why I've chosen this settings. But basically I've just set your cpu settings to recommended and your intel graphics settings to a powersave mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;`&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-01-25T15:11:46.007" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="10361" PostTypeId="1" CreationDate="2017-01-25T15:30:03.113" Score="3" ViewCount="5094" Body="&lt;p&gt;I am trying to connect an NTFS-formatted hard drive with a USB-SATA adapter, but for some reason it won't appear in the devices list in Files unless I mount it manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WYAEB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WYAEB.png&quot; alt=&quot;HDD not listed when initially plugged in&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However if I mount it manually with &lt;code&gt;sudo mount -t ntfs /dev/sdc1 /media/mike&lt;/code&gt;, it appears:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XiNus.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XiNus.png&quot; alt=&quot;HDD listed when mounted manually&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does it not appear when first plugged in?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Relevant output of &lt;code&gt;fdisk -l&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device     Boot Start       End   Sectors   Size Id Type&#xA;/dev/sdc1        2048 625141759 625139712 298.1G  7 HPFS/NTFS/exFAT&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-26T13:38:04.667" Title="External HDD doesn't appear in Files" Tags="|pantheon-files|mount|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10362" PostTypeId="2" ParentId="10347" CreationDate="2017-01-25T15:57:48.853" Score="3" Body="&lt;p&gt;What you were using before was most probably &lt;code&gt;gnome-keyring&lt;/code&gt;/&lt;code&gt;seahorse&lt;/code&gt;, which is automatically starting with the system, loading your keys and offering them to the &lt;code&gt;ssh&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regardless agent/keyring, it should start before your graphical session so all the other terminals and apps will see the authentication socket for the agent. This is usually set up in the &lt;code&gt;.XSession&lt;/code&gt; in your home directory or system-wide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Script &lt;code&gt;90x11-common_ssh-agent&lt;/code&gt; should somehow start your &lt;code&gt;ssh-agent&lt;/code&gt;. But not add the keys. If you want to add a key with the first usage, you can configure &lt;code&gt;ssh&lt;/code&gt; to do so in &lt;code&gt;~/.ssh/config&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;AddKeysToAgent yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8291" LastEditorUserId="8291" LastEditDate="2017-01-26T08:19:03.400" LastActivityDate="2017-01-26T08:19:03.400" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10363" PostTypeId="2" ParentId="10361" CreationDate="2017-01-25T16:15:17.270" Score="2" Body="&lt;p&gt;Unlike other file managers, Pantheon Files doesn't auto-mount external drives. There is an &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1094669&quot; rel=&quot;nofollow noreferrer&quot;&gt;open bug&lt;/a&gt; for adding this feature.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like USB drives to auto-mount, you can install a file manager that offers this feature, such as Nautilus. If you'd like to auto-mount just this one drive, you can make that change &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2640/792&quot;&gt;using Gnome Disk Utility&lt;/a&gt; or by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/607/792&quot;&gt;editing &lt;code&gt;/etc/fstab/&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-25T16:15:17.270" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10364" PostTypeId="1" CreationDate="2017-01-25T16:38:09.650" Score="1" ViewCount="1744" Body="&lt;p&gt;I'm want to install ruby on rails, in elementary os, but every tutorial that I follow it comes with a issue of rvm or missing dependencies, do you guy know if I need to install before or if you know where can I find a guide to do it for elementary that will be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just in case I erased ruby:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge ruby rubygems&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="JULIO MACHAN" LastEditorUserId="84" LastEditDate="2018-05-06T18:18:11.080" LastActivityDate="2022-06-07T00:12:08.960" Title="How can I install ruby on rails in elementary os?" Tags="|software-installation|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10366" PostTypeId="1" CreationDate="2017-01-24T05:11:30.997" Score="0" ViewCount="599" Body="&lt;p&gt;My NIC is a Realtek RTL8188ee. I'd noticed my browsing speeds on Ubuntu (well, elementary) were slower than on Windows. I did some searching and found &lt;a href=&quot;https://github.com/FreedomBen/rtl8188ce-linux-driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;this page&lt;/a&gt; on GitHub which claims this is primarily due to the limited transmit power for the card which Linux kernels use by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is, is the driver provided on this page trustworthy? Does anyone know FreedomBen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, is the method he described for installing and replacing the stock driver at least relatively reliable?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, do I need to download an entire new driver to up my wifi speeds or is simply &lt;code&gt;sudo iwconfig &amp;lt;wlan&amp;gt; txpower 33&lt;/code&gt; enough?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I know 33 dBm is the max limit and might be unsafe and illegal, so any pointers here would be greatly appreciated. I am clueless about this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks!&lt;/p&gt;&#xA;" OwnerUserId="8116" OwnerDisplayName="ThisIsNotAnId" LastEditorUserId="8116" LastEditDate="2017-01-25T17:51:25.703" LastActivityDate="2017-01-28T17:52:30.967" Title="Need advice about custom drivers for Realtek RTL8188ee" Tags="|wifi|networking|drivers|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10367" PostTypeId="2" ParentId="10364" CreationDate="2017-01-25T17:25:21.997" Score="1" Body="&lt;p&gt;To install the dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git-core curl zlib1g-dev build-essential libssl-dev libreadline-dev libyaml-dev libsqlite3-dev sqlite3 libxml2-dev libxslt1-dev libcurl4-openssl-dev python-software-properties libffi-dev nodejs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8294" LastActivityDate="2017-01-25T17:25:21.997" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10368" PostTypeId="2" ParentId="10251" CreationDate="2017-01-25T17:41:48.317" Score="1" Body="&lt;p&gt;Your issue is that the GNOME Testing PPA you have installed (&lt;em&gt;ricotz/testing&lt;/em&gt;) wants to provide its own version of &lt;em&gt;libxkbcommon&lt;/em&gt; which doesn't meet the requirements for rofi. Assuming you're using Loki you should have &lt;em&gt;libxkbcommon 0.5.0&lt;/em&gt; available from the Ubuntu repos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want a specific package from the &lt;em&gt;ricotz/testing&lt;/em&gt; PPA without bringing in all of the others then you can use apt pinning as described in &lt;a href=&quot;https://askubuntu.com/a/170265&quot;&gt;this post&lt;/a&gt;. But honestly I would recommend against this as you can end up with a very broken system if you don't know what you're doing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would personally recommend the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Uninstall whatever package you installed from the &lt;em&gt;ricotz/testing&lt;/em&gt; PPA.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete &lt;code&gt;/etc/apt/sources.list.d/ricotz-testing-trusty.list&lt;/code&gt; to remove the PPA.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update the apt database with &lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install rofi with &lt;code&gt;sudo apt install rofi&lt;/code&gt;. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-25T17:41:48.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10370" PostTypeId="1" CreationDate="2017-01-25T20:58:17.913" Score="0" ViewCount="1112" Body="&lt;p&gt;Update : New error. Check below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the default installation steps as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gnumdk/lollypop&#xA;sudo apt-get update&#xA;sudo apt-get install lollypop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But then got the error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package lollypop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I followed the steps by @mike-wild which were :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ git clone https://github.com/gnumdk/lollypop.git&#xA;$ cd lollypop&#xA;$ sudo apt install autoconf libglib2.0-dev intltool yelp-tools libgirepository1.0-dev libgtk-3-dev python3 python-cairo python-dbus python-gobject python-sqlite&#xA;$ ./autogen.sh&#xA;$ make&#xA;# sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This successfully installed(without any errors). But when I try to open it using the command &quot;lollypop&quot; in terminal.&#xA;I encountered this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/local/bin/lollypop&quot;, line 22, in &amp;lt;module&amp;gt;&#xA;    from lollypop.application import Application&#xA;  File &quot;/usr/local/lib/python3.4/site-packages/lollypop/application.py&quot;, line 16, in &amp;lt;module&amp;gt;&#xA;    gi.require_version('GstAudio', '1.0')&#xA;  File &quot;/usr/lib/python3/dist-packages/gi/__init__.py&quot;, line 79, in require_version&#xA;    raise ValueError('Namespace %s not available' % namespace)&#xA;ValueError: Namespace GstAudio not available&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT 2 :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running these: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gir1.2-gst-plugins-base-1.0 gir1.2-totem-plparser-1.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this lollypop opens up at least. But the gui crashes often. It is very unstable. This is the terminal output.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (lollypop:8232): WARNING **: Couldn't connect to accessibility bus:    Failed to connect to socket /tmp/dbus-36bSXu3dQ9: Connection refused&#xA;Namespace Secret not available&#xA;    - Scrobbler disabled&#xA;    - Auto cover download disabled&#xA;    - Artist informations disabled&#xA;$ sudo pip3 install pylast&#xA;&#xA;(lollypop:8232): Gtk-WARNING **: GtkOverlay does not have a property called index&#xA;You are missing lollypop-portal: https://github.com/gnumdk/lollypop-portal GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name &quot;org.gnome.Lollypop.Portal&quot; does not exist&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/local/lib/python3.4/site-packages/lollypop/application.py&quot;, line 592, in __settings_dialog&#xA;    dialog = SettingsDialog()&#xA;  File &quot;/usr/local/lib/python3.4/site-packages/lollypop/settings.py&quot;, line 169, in __init__&#xA;    h = grid.child_get_property(switch_artwork_tags, 'height')&#xA;TypeError: child_get_property() takes exactly 4 arguments (3 given)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reading the above output, I went ahead and installed lollypop-portal: &lt;a href=&quot;https://github.com/gnumdk/lollypop-portal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/gnumdk/lollypop-portal&lt;/a&gt; through the steps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/gnumdk/lollypop-portal.git&#xA;./autogen.sh&#xA;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then ran lollypop: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (lollypop:9853): WARNING **: Couldn't connect to accessibility bus:      Failed to connect to socket /tmp/dbus-36bSXu3dQ9: Connection refused&#xA;Namespace Secret not available&#xA;    - Scrobbler disabled&#xA;    - Auto cover download disabled&#xA;    - Artist informations disabled&#xA;$ sudo pip3 install pylast&#xA;&#xA;(lollypop:9853): Gtk-WARNING **: GtkOverlay does not have a property called index&#xA;You are missing lollypop-portal: https://github.com/gnumdk/lollypop-portal GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name &quot;:1.187&quot;    does not exist&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/local/lib/python3.4/site-     packages/lollypop/application.py&quot;, line 592, in __settings_dialog&#xA;    dialog = SettingsDialog()&#xA;  File &quot;/usr/local/lib/python3.4/site-packages/lollypop/settings.py&quot;, line 169, in __init__&#xA;    h = grid.child_get_property(switch_artwork_tags, 'height')&#xA;TypeError: child_get_property() takes exactly 4 arguments (3 given)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, should I install lollypop-portal before lollypop?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="5722" LastEditDate="2017-01-31T10:44:27.277" LastActivityDate="2017-01-31T10:44:27.277" Title="Error in lollypop music player" Tags="|release-freya|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10371" PostTypeId="2" ParentId="10370" CreationDate="2017-01-25T22:15:25.723" Score="2" Body="&lt;p&gt;Unfortunately the author of the PPA you are using hasn't built Lollypop for Ubuntu 14.04 (which is what Freya is based on), which is why you are getting an error saying the package could not be located.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can build it yourself using the instructions: &lt;a href=&quot;https://github.com/gnumdk/lollypop&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/gnumdk/lollypop&lt;/a&gt;, however I'm not sure if you'll be able to install the required dependencies in Freya.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ git clone https://github.com/gnumdk/lollypop.git&#xA;$ cd lollypop&#xA;$ sudo apt install autoconf libglib2.0-dev intltool yelp-tools libgirepository1.0-dev libgtk-3-dev python3 python-cairo python-dbus python-gobject python-sqlite gir1.2-gst-plugins-base-1.0 gir1.2-totem-plparser-1.0&#xA;&#xA;$ ./autogen.sh&#xA;$ make&#xA;$ sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5831" LastEditDate="2017-01-30T14:52:53.530" LastActivityDate="2017-01-30T14:52:53.530" CommentCount="14" ContentLicense="CC BY-SA 3.0" />
  <row Id="10373" PostTypeId="2" ParentId="3322" CreationDate="2017-01-26T01:19:25.440" Score="0" Body="&lt;p&gt;Thanks, Ravan for the above answer, for suspend, if anybody is looking for Hibernate, the best way is to look out for Suspend key word in above answer and replace it carefully with Hibernate, and it looks like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --system --print-reply --dest=org.freedesktop.login1 /org/freedesktop/login1 &quot;org.freedesktop.login1.Manager.Hibernate&quot; boolean:true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Though it will only run with &lt;code&gt;sudo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried on Freya and it worked.&lt;/p&gt;&#xA;" OwnerUserId="8302" LastActivityDate="2017-01-26T01:19:25.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10375" PostTypeId="2" ParentId="10354" CreationDate="2017-01-26T03:44:42.903" Score="18" Body="&lt;p&gt;This is actually a change that was recently included in a round of updates to Loki. It is briefly mentioned in their new &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-the-new-year-ff6b6ba65531#b9d4&quot;&gt;blog post&lt;/a&gt;. A package called &lt;code&gt;elementary-default-settings&lt;/code&gt; was updated to include a file located at &lt;code&gt;/etc/sudoers.d/pwfeedback&lt;/code&gt;, which changes this behavior when entering a password in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you wish to disable the feedback, try this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo mv /etc/sudoers.d/pwfeedback /etc/sudoers.d/pwfeedback.disabled&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will keep the file around in case you want to re-enable it, which you can do with the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo mv /etc/sudoers.d/pwfeedback.disabled /etc/sudoers.d/pwfeedback&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8214" LastActivityDate="2017-01-26T03:44:42.903" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10376" PostTypeId="2" ParentId="10279" CreationDate="2017-01-26T04:28:02.130" Score="1" Body="&lt;p&gt;This was part of a recent set of updates. The elementary GTK+ stylesheet was updated to make older (gtk2) applications look more like the new ones with the big header bars. Check their new &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-the-new-year-ff6b6ba65531#6b83&quot; rel=&quot;nofollow noreferrer&quot;&gt;blog post&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8214" LastActivityDate="2017-01-26T04:28:02.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10377" PostTypeId="2" ParentId="8812" CreationDate="2017-01-26T05:07:28.927" Score="1" Body="&lt;p&gt;This technique is work for me:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &quot;Files&quot; application as root&lt;/li&gt;&#xA;&lt;li&gt;Browse folder: /etc/xdg/autostart/&lt;/li&gt;&#xA;&lt;li&gt;Rename file: at-spi-dbus-bus.desktop to at-spi-dbus-bus.disabled&lt;/li&gt;&#xA;&lt;li&gt;Restart&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I can confirm that renaming /etc/xdg/autostart/at-spi-dbus-bus.desktop to /etc/xdg/autostart/at-spi-dbus-bus.disabled fixed the issue for me as well.&lt;/p&gt;&#xA;" OwnerUserId="8305" LastActivityDate="2017-01-26T05:07:28.927" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10380" PostTypeId="1" CreationDate="2017-01-26T11:45:55.460" Score="1" ViewCount="282" Body="&lt;p&gt;I use elementary on a 13inch laptop with FullHD resolution. But much of the system is just too small for me.&#xA;The size of the system's Font I have already made greater with &quot;accessibility&quot; in the settings. Unfortunately the control elements (close / full picture) are still very small. The same applies to the icons in the system control and much else. Is there an easy way to change this? (I don't like the solution to reduce the resolution)&lt;/p&gt;&#xA;" OwnerUserId="8307" LastActivityDate="2017-01-26T14:48:20.110" Title="Size of Controls" Tags="|settings|resolution|user-interface|accessibility|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10382" PostTypeId="1" CreationDate="2017-01-26T12:29:38.663" Score="0" ViewCount="127" Body="&lt;p&gt;A friend of mine have a small PC. As a test, i have tried to install Elementary OS on it.&lt;br&gt;&#xA;Only the S/PDIF audio was shown in system, but on this PC there is are also an analog audio card. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I use this card for audio output? I think it should first be installed, but how? During install it did not show up.&lt;/p&gt;&#xA;" OwnerUserId="8309" LastEditorUserId="12279" LastEditDate="2019-01-02T23:27:22.797" LastActivityDate="2019-06-02T03:02:32.463" Title="No analog Audio after new install" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10384" PostTypeId="2" ParentId="8408" CreationDate="2017-01-26T13:33:15.803" Score="1" Body="&lt;p&gt;According to the README.md of the arc theme you need to also install the gtk2-engines-murrine package. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/horst3180/arc-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/horst3180/arc-theme&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quote:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;For the theme to function properly, install the following&#xA;&#xA;GNOME Shell, GTK 3.14 - 3.22&#xA;The gnome-themes-standard package&#xA;The murrine engine. This has different names depending on your distro.&#xA;&#xA;     gtk-engine-murrine (Arch Linux)&#xA;     gtk2-engines-murrine (Debian, Ubuntu, elementary OS)&#xA;     gtk-murrine-engine (Fedora)&#xA;     gtk2-engine-murrine (openSUSE)&#xA;     gtk-engines-murrine (Gentoo)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5626" LastActivityDate="2017-01-26T13:33:15.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10387" PostTypeId="2" ParentId="10380" CreationDate="2017-01-26T14:48:20.110" Score="2" Body="&lt;p&gt;One other option would be to tell elementary to render everything at 2x, then scale your resolution down to 1.5x, &lt;a href=&quot;https://wiki.gnome.org/BrionVibber/HiDpiNotes&quot; rel=&quot;nofollow noreferrer&quot;&gt;as described here&lt;/a&gt;. This isn't an ideal solution - you'll still get some blurriness, and graphics performance may be a little slower - but it would solve the problem, and it would look better than just reducing the resolution.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There isn't an easy way to set up true 1.5x scaling on elementary. As you mentioned, changing the font size to &quot;larger&quot; helps a little (and will make icons a bit bigger), and changing the resolution would fix the problem at the expense of making things really blurry. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/elementaryos/what-is-hidpi-and-why-does-it-matter-b024eabea20d#.t2e0lo6ya&quot; rel=&quot;nofollow noreferrer&quot;&gt;This post&lt;/a&gt; from elementary's UX architect explains why elementary provides 2x scaling but not 1.5x scaling.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-01-26T14:48:20.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10388" PostTypeId="2" ParentId="10382" CreationDate="2017-01-26T16:03:43.150" Score="1" Body="&lt;p&gt;German:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wenn der PC einen Intel-Chip für das Audio verwendet, verweisen wir auf diese Anleitung: &lt;a href=&quot;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;English:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the PC uses an Intel chip for it's audio refer to these instructions: &lt;a href=&quot;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Audio/UpgradingAlsa/DKMS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-26T16:03:43.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10390" PostTypeId="2" ParentId="10364" CreationDate="2017-01-26T18:25:56.363" Score="1" Body="&lt;p&gt;Thanks Guys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I follow another install guide, I hope it help other people with the same issue, this is the link:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;https://www.digitalocean.com/community/tutorials/how-to-install-ruby-on-rails-with-rbenv-on-ubuntu-16-04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8314" LastActivityDate="2017-01-26T18:25:56.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10391" PostTypeId="1" CreationDate="2017-01-26T23:07:13.800" Score="3" ViewCount="2669" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LqJtU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LqJtU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi, can anyone guide me on how to solve this broken google chrome icon please?&lt;/p&gt;&#xA;" OwnerUserId="8318" LastEditorUserId="578" LastEditDate="2017-01-27T06:14:15.847" LastActivityDate="2019-09-06T10:54:16.207" Title="How to solve broken Google Chrome icon?" Tags="|release-loki|icons|google-chrome|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10392" PostTypeId="2" ParentId="10391" CreationDate="2017-01-26T23:41:05.510" Score="-1" Body="&lt;p&gt;Try to reinstall google chrome, it's an easy way &lt;/p&gt;&#xA;" OwnerUserId="8167" LastEditorUserId="578" LastEditDate="2017-01-27T06:12:24.583" LastActivityDate="2017-01-27T06:12:24.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10393" PostTypeId="2" ParentId="10391" CreationDate="2017-01-27T01:11:07.403" Score="3" Body="&lt;p&gt;In the terminal navigate to &lt;code&gt;/usr/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor google-chrome.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;scroll about halfway down to just above the &lt;code&gt;[Desktop Action NewWindow]&lt;/code&gt; section&lt;/p&gt;&#xA;&#xA;&lt;p&gt;look for the Icon entry, it should look like this...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=google-chrome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If not, change it to that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After following the steps, the icon on the launcher may not update automatically. So, just remove the icon from the launcher first and then re-store icon on the dock after following the steps in this answer.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="12150" LastEditDate="2019-09-05T22:29:39.903" LastActivityDate="2019-09-05T22:29:39.903" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10394" PostTypeId="1" AcceptedAnswerId="10721" CreationDate="2017-01-27T02:13:53.327" Score="8" ViewCount="592" Body="&lt;p&gt;Is there any way I can replicate the &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;`&lt;/kbd&gt; functionality from Ubuntu? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's like Alt + Tab only it just switches through the windows of the current application. For instance, if I have 3 file managers open and one of them focused, I can press Alt + ` to switch between the other 2 so I don't have to cycle through all other open applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really love elementary but this one thing is really killing my workflow. I often have multiple windows of the same application open and it's really convenient to be able to switch between them and filter out all the other open apps.&lt;/p&gt;&#xA;" OwnerUserId="8321" LastEditorDisplayName="user170" LastEditDate="2017-02-16T11:50:32.863" LastActivityDate="2017-02-16T12:08:23.133" Title="Is there a hotkey to switch through the windows of the current application? (as Alt + ` in Ubuntu)" Tags="|keyboard-shortcuts|window-management|" AnswerCount="1" CommentCount="4" ClosedDate="2017-02-19T20:39:34.557" ContentLicense="CC BY-SA 3.0" />
  <row Id="10397" PostTypeId="1" CreationDate="2017-01-27T07:40:02.280" Score="1" ViewCount="148" Body="&lt;p&gt;I paid for elementary OS, downloaded the software but my installation failed.  I'm starting over and need to download again.  How do I go about this?  I have the confirm email receipt if needed.  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="8324" LastEditorUserId="308" LastEditDate="2018-08-07T16:55:38.550" LastActivityDate="2018-08-07T16:55:38.550" Title="How to download elementary OS a second time?" Tags="|download|" AnswerCount="1" CommentCount="0" ClosedDate="2017-01-27T18:29:15.833" ContentLicense="CC BY-SA 4.0" />
  <row Id="10398" PostTypeId="2" ParentId="10397" CreationDate="2017-01-27T08:10:31.337" Score="1" Body="&lt;p&gt;Just click on &quot;Custom&quot; put &quot;0$&quot; in the amount field, click on &quot;Custom&quot; again if it not selected, and then click Download button.&lt;/p&gt;&#xA;" OwnerUserId="359" LastActivityDate="2017-01-27T08:10:31.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10399" PostTypeId="1" CreationDate="2017-01-27T09:15:42.627" Score="0" ViewCount="555" Body="&lt;pre&gt;&lt;code&gt;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list:1 and /etc/apt/sources.list.d/patches.list:1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8325" LastEditorUserId="578" LastEditDate="2017-01-27T09:47:01.880" LastActivityDate="2017-02-26T10:19:44.117" Title="Why do I get these errors?" Tags="|apt|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10400" PostTypeId="2" ParentId="10399" CreationDate="2017-01-27T09:49:53.697" Score="2" Body="&lt;p&gt;Actually these error messages tell you pretty much the problem: there are some source repositories that are defined twice, in the files &lt;code&gt;/etc/apt/sources.list.d/elementary-os-ubuntu-os-patches-xenial.list&lt;/code&gt; and &lt;code&gt;/etc/apt/sources.list.d/patches.list&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should look for the lines that appear in both of the files and delete them in one of them.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-01-27T09:49:53.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10401" PostTypeId="1" CreationDate="2017-01-27T10:13:37.077" Score="1" ViewCount="209" Body="&lt;p&gt;This error keeps showing up &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: mysql-common: subprocess installed post-installation script returned error exit status 2&#xA;E: libmysqlclient20: 25.0000:dependency problems - leaving unconfigured&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8326" LastEditorUserId="578" LastEditDate="2017-01-27T13:55:52.680" LastActivityDate="2017-09-25T22:41:01.673" Title="Not able to install applications" Tags="|software-installation|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10402" PostTypeId="1" CreationDate="2017-01-27T13:11:02.923" Score="1" ViewCount="187" Body="&lt;p&gt;I rarely use most of the Settings, but those that I use more often (Shortcuts, Startup applications, Printers) I want them accessed really fast.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example I would like to be able to open with only one click or short-key the Shortcuts window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Lp7wI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Lp7wI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At some point the subsections of Settings were accessible through Slingshot, but &lt;a href=&quot;https://elementaryos.stackexchange.com/q/9903/170&quot;&gt;not anymore&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An ideal way for me would be to know the commands that would trigger at least some of them and then create a shortcut or a dock launcher for those.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there such commands?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-08T12:46:16.153" Title="Commands to start sub-Settings?" Tags="|release-loki|settings|slingshot|command-line|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10403" PostTypeId="2" ParentId="10337" CreationDate="2017-01-27T13:44:20.820" Score="0" Body="&lt;p&gt;I am new here so sorry if I am teaching my grandmother to suck eggs.&#xA;Do you have the hardware to burn the downloaded .iso image onto a DVD and try to install from that?&#xA;I have just installed Loki on a HP Envy this way with no problems, apart from manually having to get it to boot on the internal DVDRW in the Boot EFI.&#xA;Could something similar be preventing your usb stick from booting correctly?&lt;/p&gt;&#xA;" OwnerDisplayName="user8328" LastEditorUserId="578" LastEditDate="2017-01-27T14:34:53.580" LastActivityDate="2017-01-27T14:34:53.580" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10406" PostTypeId="1" CreationDate="2017-01-27T18:59:49.537" Score="1" ViewCount="4770" Body="&lt;p&gt;I've been keeping attention to processes in my laptop and gala is constantly in the top 3 places, many times using more then 100% of the CPU. I think that is what was been slowing down my computer, because other then that, i just use Firefox.. I've been using linux from less then 1 month, its normal to be slow as windows after some months of use? &lt;/p&gt;&#xA;" OwnerUserId="8331" LastEditorUserId="5722" LastEditDate="2017-01-30T14:53:48.043" LastActivityDate="2018-07-05T12:45:00.730" Title="Is there any fix for the high CPU usage of Gala?" Tags="|release-loki|gala|cpu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10407" PostTypeId="2" ParentId="6665" CreationDate="2017-01-27T20:59:30.157" Score="1" Body="&lt;p&gt;Run &lt;code&gt;lshw -class network&lt;/code&gt;. Look at the logical name for your wireless card. Let that be denoted &lt;code&gt;&amp;lt;wlan&amp;gt;&lt;/code&gt;. CD into a relevant directory, store your current wireless config: &lt;code&gt;iwconfig &amp;lt;wlan&amp;gt; &amp;gt; current_wireless_config&lt;/code&gt; to restore settings later if need be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Post the output to &lt;code&gt;iwlist &amp;lt;wlan&amp;gt; channel&lt;/code&gt; here. You may wish to follow the advice in this answer: &lt;a href=&quot;https://askubuntu.com/a/55748&quot;&gt;https://askubuntu.com/a/55748&lt;/a&gt; or you may download linSSID from the app center and find a good open channel and frequency and set it as follows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turn your wifi off, then run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo iwconfig &amp;lt;wlan&amp;gt; mode Managed&#xA;sudo iwconfig &amp;lt;wlan&amp;gt; freq &amp;lt;desired-freq&amp;gt;&#xA;sudo iwconfig &amp;lt;wlan&amp;gt; channel &amp;lt;desired-channel&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Make sure this is in agreement with your output from &lt;code&gt;iwlist &amp;lt;wlan&amp;gt; scan&lt;/code&gt; or &lt;code&gt;iwlist &amp;lt;wlan&amp;gt; channel&lt;/code&gt; and the frequency matches the corresponding channel. Reboot computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WARNING&lt;/strong&gt;: According to &lt;code&gt;man iwconfig&lt;/code&gt; under &quot;freq/channel&quot;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;When  using  Managed mode, most often the Access Point dictates the&#xA;  channel and the driver may refuse the setting of the frequency.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;As per your discussion on askubuntu, Managed mode may be the best option you have. So try just that without changing the frequency or channel parameters and see how it goes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other parameters of your wireless interface may also be the culprit for your connectivity issues. To be sure, post the output to &lt;code&gt;iwconfig &amp;lt;wlan&amp;gt;&lt;/code&gt; in your question.&lt;/p&gt;&#xA;" OwnerUserId="8116" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-01-27T23:05:07.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10408" PostTypeId="1" CreationDate="2017-01-27T21:44:15.060" Score="1" ViewCount="435" Body="&lt;p&gt;I have &lt;strong&gt;set the speed of my trackpad to max&lt;/strong&gt; in the system settings.&#xA;However, the trackpad is &lt;strong&gt;still quite slow&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In essence, I have to move my finger around quite a lot to get from one end of the screen to the other (&lt;em&gt;sensitivity or speed&lt;/em&gt;?). Also, the moment I take my finger off the trackpad the cursor stops moving right away, instead of slowly losing speed and then stopping (&lt;em&gt;coasting&lt;/em&gt;?).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the &quot;standard&quot; way to adjust and finetune a trackpad on Elementary OS Loki, &lt;em&gt;beyond the basic settings in the system settings app&lt;/em&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like my lenovo trackpad to behave &lt;strong&gt;similarly to mac trackpads on OS X&lt;/strong&gt; (not the same functionality which requires more software I assume, but similar sensitivity, speed, coasting etc).&lt;/p&gt;&#xA;" OwnerUserId="2544" LastActivityDate="2017-01-27T21:44:15.060" Title="Slow trackpad: finetuning and sensitivity/speed/accelation configuration" Tags="|release-loki|settings|touchpad|mouse|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10409" PostTypeId="2" ParentId="10337" CreationDate="2017-01-27T21:51:40.817" Score="2" Body="&lt;p&gt;Install elementary OS with &lt;code&gt;acpi=off&lt;/code&gt;, &lt;code&gt;noapic&lt;/code&gt; and &lt;code&gt;nolapic&lt;/code&gt; option:&lt;/p&gt;&#xA;&lt;p&gt;when booting up , press &lt;kbd&gt;F6&lt;/kbd&gt; , select &lt;code&gt;acpi=off&lt;/code&gt; , &lt;code&gt;noapic&lt;/code&gt; and &lt;code&gt;nolapic&lt;/code&gt; options by pressing &lt;kbd&gt;Enter&lt;/kbd&gt; or &lt;kbd&gt;Space&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;p&gt;Press &lt;kbd&gt;Esc&lt;/kbd&gt; and select &lt;em&gt;Install Elementary OS&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Related : &lt;a href=&quot;https://unix.stackexchange.com/a/216960/153195&quot;&gt;Answer on U&amp;amp;L&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;The problem is solved by installing elementaryOS using the &lt;code&gt;acpi=off&lt;/code&gt; parametre&lt;/p&gt;&#xA;" OwnerUserId="4427" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-10T11:12:57.317" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10410" PostTypeId="2" ParentId="10406" CreationDate="2017-01-27T23:42:21.260" Score="1" Body="&lt;p&gt;It's not normal for it to be so slow. There might be a corrupt package. Try reinstalling gala.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open synaptic package manager by typing it in the applications menu search bar. Let it load. Once done, press &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; and search for libmutter. It will display a list of packages. If you right click on any of them it will display the option for marking package for reinstallation,removal, etc. Mark the following packages for reinstallation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gala&lt;/code&gt;, &lt;code&gt;libgala0&lt;/code&gt;, &lt;code&gt;libmutter0g&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click Edit &gt; Apply Marked Changes. Click Apply on summary window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot your computer.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please check back to tell us if this helps.&lt;/p&gt;&#xA;" OwnerUserId="8116" LastActivityDate="2017-01-27T23:42:21.260" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10411" PostTypeId="1" AcceptedAnswerId="10412" CreationDate="2017-01-28T01:00:15.803" Score="1" ViewCount="120" Body="&lt;p&gt;I cannot do anything in Empathy IM as the GUI looks like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/RYcXV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RYcXV.png&quot; alt=&quot;unusable Empathy GUI&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The add account window is not usable on Loki 0.4. Are there any solutions I can try out?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question could be a duplicate of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9252/empathy-irc-cant-create-account&quot;&gt;this one&lt;/a&gt;. I just wonder, if I can't do anything about this, is there a way to diagnose whether this is a elementary or an empathy IM problem, so I can report it to the right people?&lt;/p&gt;&#xA;" OwnerUserId="2544" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-28T01:39:27.957" Title="Empathy IM: interface unusable, not rendered adequately" Tags="|release-loki|user-interface|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10412" PostTypeId="2" ParentId="10411" CreationDate="2017-01-28T01:39:27.957" Score="0" Body="&lt;p&gt;I had the same problem and solved it like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install telepathy-* empathy empathy-skype&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found this solution here: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=98273&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=98273&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7938" LastActivityDate="2017-01-28T01:39:27.957" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10413" PostTypeId="2" ParentId="10337" CreationDate="2017-01-28T01:43:04.320" Score="0" Body="&lt;p&gt;What tool did you use to burn the ISO to USB? I have had mixed luck with anything other than Rufus on Windows. If you can, I would recommend creating the ISO via Rufus.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-01-28T01:43:04.320" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10415" PostTypeId="1" AcceptedAnswerId="10429" CreationDate="2017-01-28T02:20:10.397" Score="1" ViewCount="303" Body="&lt;p&gt;Cumulus, a popular weather app for linux isn't working on loki. it doesn't launch from &lt;code&gt;slingshot-launcher&lt;/code&gt; and when i invoke it from terminal this comes back :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/cumulus&quot;, line 48, in &amp;lt;module&amp;gt;&#xA;    import cumulus&#xA;  File &quot;/usr/lib/python2.7/dist-packages/cumulus/__init__.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;    from gi.repository import Gtk # pylint: disable=E0611&#xA;ImportError: No module named gi.repository&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyone who can help me with this?&lt;/p&gt;&#xA;" OwnerUserId="6001" LastEditorUserId="5722" LastEditDate="2017-01-31T18:12:45.103" LastActivityDate="2018-10-26T07:12:27.117" Title="Cumulus not working on elementary os loki" Tags="|release-loki|gtk|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10416" PostTypeId="1" CreationDate="2017-01-28T05:12:44.577" Score="1" ViewCount="1316" Body="&lt;p&gt;I want to have the repositories is essential in my system. &#xA;can someone give me a list with the most safe and needed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you. &lt;/p&gt;&#xA;" OwnerUserId="8325" LastActivityDate="2017-01-29T12:21:41.763" Title="ppa essential for ElementaryOS" Tags="|ppa|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10417" PostTypeId="1" AcceptedAnswerId="10435" CreationDate="2017-01-28T06:19:00.017" Score="1" ViewCount="2547" Body="&lt;p&gt;I just installed Elementary Loki&#xA;How do I get caffeine to work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It does not show up.  If I run it from the term.. I get &#xA;PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.&#xA;  from gi.repository import GObject, Gtk, GLib&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-01-28T12:40:43.053" LastActivityDate="2017-01-29T15:34:04.140" Title="caffeine how to work it" Tags="|power|" AnswerCount="1" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10418" PostTypeId="1" CreationDate="2017-01-28T11:30:10.757" Score="0" ViewCount="923" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WPQvW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WPQvW.png&quot; alt=&quot;Wingpanel&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm new to elementary os loki, i cant find the way to remove the red dash icon from wingpanel. alt+right click is not working. any suggestions? I have uninstalled Mega.nz app, but the icon place holder is backed up by this dash icon. &lt;/p&gt;&#xA;" OwnerUserId="6163" LastActivityDate="2018-01-24T04:39:02.447" Title="How to remove third-party icons from wingpanel in Elementary OS Loki?" Tags="|wingpanel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10419" PostTypeId="2" ParentId="10416" CreationDate="2017-01-28T11:32:16.897" Score="3" Body="&lt;p&gt;Everything you need is already inside &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; and &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You don't need any extra PPA. If you want some interesting programs you can check the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/3m6gg1/just_installed_eos_on_my_chromebook_working_great/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Just installed EOS on my Chromebook. Working great! Just wondering about the best tweaks or programs that I may not know about&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/apps/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Apps for elementary&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/51y9wa/which_apps_would_you_install_after_installing/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Which apps would you install after installing loki, to make it more awesome?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But be careful! Make sure the program you are trying to install works on your elementary OS version.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="5722" LastEditDate="2017-01-29T12:21:41.763" LastActivityDate="2017-01-29T12:21:41.763" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10421" PostTypeId="1" AcceptedAnswerId="10422" CreationDate="2017-01-28T11:50:36.310" Score="2" ViewCount="3111" Body="&lt;p&gt;Is there any way to install Elementary on 6 year old Samsung N510 with Intel Atom?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specs:&lt;br&gt;&#xA;Processor: Intel Atom N270 1.6 GHz&lt;br&gt;&#xA; Graphics adapter: NVIDIA GeForce 9400M (G) / ION (LE), Core: 450 MHz, shared memory,  Forceware 186.19/XP&lt;br&gt;&#xA; Memory: 1024 MB, DDR2 PC2-6400, 1 Slot, max. 2GB&lt;br&gt;&#xA; Display: 1.6 inch 16:9, 1366x768 pixel, SEC 3052, glossy: no&lt;br&gt;&#xA; Mainboard: Nvidia MCP79MX (9400M G)&lt;br&gt;&#xA; Storage: Samsung SpinPoint M5S HM160HI, 160 GB, 5400 rpm&lt;/p&gt;&#xA;" OwnerUserId="8340" LastEditorUserId="5722" LastEditDate="2017-01-31T18:12:15.573" LastActivityDate="2018-08-04T02:53:20.160" Title="Elementary OS on Intel Atom?" Tags="|system-installation|intel|32-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10422" PostTypeId="2" ParentId="10421" CreationDate="2017-01-28T14:22:51.773" Score="5" Body="&lt;p&gt;Unfortunately elementary OS 0.4 Loki requires a 64-bit CPU, however the Atom N270 is 32-bit. All of the Loki packages are only bit for 64-bit, so installing Ubuntu and then adding the elementary repos is not a viable solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS 0.3 Freya, the previous elementary release, was the last to feature a 32-bit installer. You can download it by pasting the following magnet link into a BitTorrent client:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;magnet:?xt=urn:btih:0a36a61cb46fc1444c95eb62185b777d65362ca9&amp;amp;dn=elementaryos-freya-i386.20150411.iso&amp;amp;tr=https%3A%2F%2Fashrise.com%3A443%2Fphoenix%2Fannounce&amp;amp;tr=udp%3A%2F%2Fopen.demonii.com%3A1337%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&amp;amp;ws=http%3A%2F%2Fsuberb-sea2.dl.sourceforge.net%2Fproject%2Felementaryos%2Fstable%2Felementaryos-freya-i386.20150411.iso&amp;amp;ws=http%3A%2F%2Fignum.dl.sourceforge.net%2Fproject%2Felementaryos%2Fstable%2Felementaryos-freya-i386.20150411.iso&amp;amp;ws=http%3A%2F%2Fheanet.dl.sourceforge.net%2Fproject%2Felementaryos%2Fstable%2Felementaryos-freya-i386.20150411.iso&amp;amp;ws=http%3A%2F%2Fcitylan.dl.sourceforge.net%2Fproject%2Felementaryos%2Fstable%2Felementaryos-freya-i386.20150411.iso)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You won't receive feature updates for Freya, only security patches (making it safe for continued use).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might like to take a look at installing &lt;a href=&quot;https://www.ubuntu.com/download/alternative-downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;regular Ubuntu&lt;/a&gt;, or the more lightweight &lt;a href=&quot;http://lubuntu.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lubuntu&lt;/a&gt; - both of which provide 32-bit installers.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="578" LastEditDate="2017-01-31T14:38:44.953" LastActivityDate="2017-01-31T14:38:44.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10423" PostTypeId="2" ParentId="10402" CreationDate="2017-01-28T15:24:58.883" Score="0" Body="&lt;p&gt;That's not a quite what I asked, but... &#xA;At least one sub-setting (Startup) is administer also by another (a bit under-the hood) tool: &lt;code&gt;gnome-session-properties&lt;/code&gt; (of the &lt;code&gt;gnome-session-bin&lt;/code&gt; package, installed by default) - more &lt;a href=&quot;https://elementaryos.stackexchange.com/a/351/170&quot;&gt;here&lt;/a&gt;. - So, &lt;code&gt;gnome-session-properties&lt;/code&gt; can be the command for that.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-01-28T15:24:58.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10424" PostTypeId="2" ParentId="10401" CreationDate="2017-01-28T16:25:11.197" Score="1" Body="&lt;p&gt;Seems like your package manager is corrupt somehow. Have a look at this answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/773443/495472&quot;&gt;https://askubuntu.com/a/773443/495472&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, try googling the error. That's how I found the solution :)&lt;/p&gt;&#xA;" OwnerUserId="8342" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-01-28T16:30:36.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10425" PostTypeId="1" CreationDate="2017-01-28T16:27:37.797" Score="1" ViewCount="135" Body="&lt;p&gt;In the Dock I can see all the icons for the applications I have open.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6wKl2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6wKl2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;But there is just a icon with a cogwheel for some applications (Vivaldi, Intellij and Postman in this case) when I cycle through the open applications with &lt;code&gt;alt&lt;/code&gt; + &lt;code&gt;tab&lt;/code&gt;. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/1vS8L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1vS8L.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="637" LastEditorUserId="637" LastEditDate="2017-01-28T20:30:58.063" LastActivityDate="2017-01-28T20:31:20.753" Title="Cogwheel icon on dock when using alt + tab" Tags="|release-loki|plank|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10426" PostTypeId="2" ParentId="10425" CreationDate="2017-01-28T17:36:55.550" Score="2" Body="&lt;p&gt;The Vivaldi icon started working after a re-start. For Intellij I created a new &lt;code&gt;.desktop&lt;/code&gt; following &lt;a href=&quot;https://stackoverflow.com/a/28493011/2420986&quot;&gt;this&lt;/a&gt; and for Postman I created a &lt;code&gt;.desktop&lt;/code&gt; file like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Postman&#xA;Icon=/home/user/Postman/resources/app/assets/icon.png&#xA;Exec=/home/user/Postman/Postman %u&#xA;Comment=Postman Native App&#xA;Categories=Network; &#xA;Terminal=false&#xA;StartupWMClass=postman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the .desktop file in &lt;code&gt;/home/user/.local/share/applications/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="637" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2017-01-28T20:31:20.753" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10427" PostTypeId="2" ParentId="10366" CreationDate="2017-01-28T17:52:30.967" Score="1" Body="&lt;p&gt;It seems that Realtek PCI(e) cards do not work well when the firware power save is enabled, it can be disabled with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8188ee fwlps=N&quot; | sudo tee /etc/modprobe.d/rtl8188ee.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You do not need a new driver to up your TX power but there is a chance that you will not need to change it after setting the power save to off&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-01-28T17:52:30.967" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10428" PostTypeId="1" AcceptedAnswerId="10436" CreationDate="2017-01-28T17:59:50.057" Score="1" ViewCount="2210" Body="&lt;p&gt;I'm trying to mount a sd card on elementary OS 0.4 Loki (64-bit). The drive is recognized in &lt;code&gt;gparted&lt;/code&gt; and with &lt;code&gt;sudo fdisk -l&lt;/code&gt; but I fail mounting it. Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="8343" LastActivityDate="2018-12-27T18:56:39.357" Title="auto mount sd card on elementary os" Tags="|release-loki|filesystem|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10429" PostTypeId="2" ParentId="10415" CreationDate="2017-01-28T18:30:59.873" Score="1" Body="&lt;p&gt;I'm not sure how you installed it, but it looks like you are missing the &lt;code&gt;python-gobject&lt;/code&gt; package which is used by Python to interact with GTK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install it with &lt;code&gt;sudo apt install python-gobject&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-28T18:30:59.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10430" PostTypeId="1" CreationDate="2017-01-28T19:41:17.717" Score="1" ViewCount="2562" Body="&lt;p&gt;I would like to create a launcher for the XAMPP managing app. The .run file is located in /opt/lampp and can be started via terminal by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /opt/lampp/manager-linux-x64.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'd rather like to start the manager app from the applications menu and therefore added a XAMPP.desktop file to /usr/share/applications. Content is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env xdg-open&#xA;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Terminal=true&#xA;Icon=/opt/lampp/XAMPP.png&#xA;Name=XAMPP&#xA;Exec=gksudo /opt/lampp/manager-linux-x64.run&#xA;Comment=Start XAMPP Control Panel&#xA;Name=XAMPP&#xA;Comment=Start XAMPP Control Panel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The tutorial at &lt;a href=&quot;https://elementaryforums.com/index.php?threads/create-a-xampp-launcher-on-the-desktop.1265/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?threads/create-a-xampp-launcher-on-the-desktop.1265/&lt;/a&gt; didn't work for me. Although there is a XAMPP link in the applications menu I can only 'add to dock' in the context menu and clicking the link makes absolutely nothing happen.&lt;/p&gt;&#xA;" OwnerUserId="8344" LastEditorUserId="8348" LastEditDate="2017-01-29T10:08:28.033" LastActivityDate="2018-04-22T12:37:24.797" Title="Add custom launcher" Tags="|settings|root|launcher|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10431" PostTypeId="1" CreationDate="2017-01-28T22:44:39.027" Score="0" ViewCount="811" Body="&lt;p&gt;I use &lt;a href=&quot;https://help.ubuntu.com/community/mkusb&quot; rel=&quot;nofollow noreferrer&quot;&gt;MKUSB&lt;/a&gt; and it works brilliantly for eOS Loki persistent live.  However, I cannot work out how to edit the boot menu...  I can't find grub.cfg (which I've done before, but not on a MKUSB persistent live).  Anyone have experience with this?  Ideally I want to bypass the boot menu altogether, so it just boots straight to eOS on any system.&lt;/p&gt;&#xA;" OwnerUserId="6694" LastActivityDate="2019-04-27T08:01:55.373" Title="mkusb persistent live boot configuration" Tags="|boot|grub|usb-drive|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10432" PostTypeId="1" CreationDate="2017-01-29T09:24:09.657" Score="6" ViewCount="7990" Body="&lt;p&gt;How to configure the config file for libinput config&#xA;I want the apple gestures to work on elementary.&#xA;I am able to change workspaces by swipe up and down.  but that is just about it.&#xA;For those of you who do not know about this, please see&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/bulletmark/libinput-gestures&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and this link here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://web.apeconsulting.co.uk/wordpress/adrian/touch-me-touch-me-say-that-you-love-me/&quot; rel=&quot;noreferrer&quot;&gt;https://web.apeconsulting.co.uk/wordpress/adrian/touch-me-touch-me-say-that-you-love-me/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some gnome commands.. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the file below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Configuration file for libinput-gestures.&#xA;#&#xA;# The default configuration file exists at /etc/libinput-gestures.conf&#xA;# but a user can create a personal custom configuration file at&#xA;# ~/.config/libinput-gestures.conf.&#xA;#&#xA;# Lines starting with '#' and blank lines are ignored. Currently&#xA;# &quot;gesture&quot; and &quot;device&quot; configuration keywords are supported as&#xA;# described below. The keyword can optionally be appended with a &quot;:&quot; (to&#xA;# maintain compatibility with original format configuration files).&#xA;#&#xA;# Each gesture line has 3 [or 4] arguments:&#xA;#&#xA;# action motion [finger_count] command&#xA;#&#xA;# where action and motion is either:&#xA;#     swipe up&#xA;#     swipe down&#xA;#     swipe left&#xA;#     swipe right&#xA;#     pinch in&#xA;#     pinch out&#xA;#&#xA;# command is the remainder of the line and is any valid shell command +&#xA;# arguments.&#xA;#&#xA;# finger_count is a single numeric digit and is optional (and is&#xA;# typically 3 or 4). If specified then the command is executed when&#xA;# exactly that number of fingers is used in the gesture. If not&#xA;# specified then the command is executed when that gesture is executed&#xA;# with any number of fingers. Gesture lines specified with finger_count&#xA;# have priority over the same gesture specified without any&#xA;# finger_count.&#xA;#&#xA;# Typically command will be xdotool, or wmctrl. See &quot;man xdotool&quot; for&#xA;# the many things you can action with that tool. Note that unfortunately&#xA;# xdotool does not work with native Wayland clients.&#xA;#&#xA;# Note the default is an &quot;internal&quot; command that uses wmctrl to switch&#xA;# workspaces and, unlike xdotool, works on both Xorg and Wayland (via&#xA;# XWayland). It also can be configured for vertical and horizontal&#xA;# switching over tabular workspaces, as per the example below. You can&#xA;# also add &quot;-w&quot; to the internal command to allow wrapping workspaces.&#xA;&#xA;# Move to next workspace (works for GNOME/KDE/etc on Wayland and Xorg)&#xA;gesture swipe up    _internal ws_up&#xA;#gesture swipe up   xdotool key super+Page_Down&#xA;&#xA;# Move to prev workspace (works for GNOME/KDE/etc on Wayland and Xorg)&#xA;gesture swipe down  _internal ws_down&#xA;#gesture swipe down xdotool key super+Page_Up&#xA;&#xA;# Browser go forward (works only for Xorg, and Xwayland clients)&#xA;gesture swipe left  xdotool key alt+Right&#xA;&#xA;# Browser go back (works only for Xorg, and Xwayland clients)&#xA;gesture swipe right xdotool key alt+Left&#xA;&#xA;# Example of 8 static workspaces, e.g. using KDE virtual-desktops,&#xA;# arranged in 2 rows of 4 across using swipe up/down/left/right to&#xA;# navigate in fixed planes. Must match how you have configured your&#xA;# virtual desktops.&#xA;#gesture swipe up   _internal --col=2 ws_up&#xA;#gesture swipe down _internal --col=2 ws_down&#xA;#gesture swipe left _internal --row=4 ws_up&#xA;#gesture swipe right    _internal --row=4 ws_down&#xA;&#xA;# GNOME SHELL open/close overview (works for GNOME on Wayland and Xorg)&#xA;gesture pinch in dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'&#xA;&#xA;gesture pinch out dbus-send --session --type=method_call --dest=org.gnome.Shell /org/gnome/Shell org.gnome.Shell.Eval string:'Main.overview.toggle();'&#xA;&#xA;# This application normally determines your touchpad device&#xA;# automatically. Some users may have multiple touchpads but by default&#xA;# we use only the first one found. However, you can choose to specify&#xA;# the explicit device name to use. Run libinput-list-devices to work out&#xA;# the name of your device (from the &quot;Device:&quot; field). Then add a device&#xA;# line specifying that name, e.g:&#xA;#&#xA;#device DLL0665:01 06CB:76AD Touchpad&#xA;#&#xA;# Or you can choose to use ALL touchpad devices by setting the device&#xA;# name to &quot;all&quot;. This reduces performance slightly so only set this if&#xA;# you need to.&#xA;#&#xA;#device all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-02-05T10:41:24.730" LastActivityDate="2017-03-19T11:56:26.270" Title="Multi-Touch Gestures for eOS config file for Libinput OS" Tags="|touchpad|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10433" PostTypeId="2" ParentId="3822" CreationDate="2017-01-29T10:07:11.787" Score="2" Body="&lt;p&gt;Please, use my updated &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2083&quot;&gt;answer&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter overlay-key &quot;'Super_L'&quot;&#xA;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'wingpanel --toggle-indicator=app-launcher'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This solution works fine both on open and close Slingshot (the application launcher).&lt;/p&gt;&#xA;" OwnerUserId="160" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-01-29T10:07:11.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10435" PostTypeId="2" ParentId="10417" CreationDate="2017-01-29T11:27:30.490" Score="2" Body="&lt;p&gt;I found the solution.  I needed to add the ppa for caffeine&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:caffeine-developers/ppa&#xA;sudo apt-get update&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That seemed to do the trick.  Now I have caffeine indicator.  Works well.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-01-29T15:34:04.140" LastActivityDate="2017-01-29T15:34:04.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10436" PostTypeId="2" ParentId="10428" CreationDate="2017-01-29T13:23:32.950" Score="0" Body="&lt;p&gt;Install &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install exfat-fuse &#xA;sudo apt install exfat-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am just making an answer so that it is solved and people know this.  I always have this problem with every distribution.. except I think Mate may have included it.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-01-29T13:23:32.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10437" PostTypeId="1" CreationDate="2017-01-29T14:12:42.563" Score="0" ViewCount="2491" Body="&lt;p&gt;I want to learn Linux so after lot of research I choose Elementary OS to start with. I installed it using USB as my primary and only os, after first time installation everything was fine and running smooth but I wanted to create partitions. But this time I choose to encrypt my disk. After installation every thing was fine but then I tried to create some folders in my drives and it was giving permission denied flags. I can create folders and copy paste files with root using terminal but its hard for me as non linux and first time user. I tried to complete reinstall but still can't get rid of it. I tried to create diffrent size of partitions but still no luck, I even installed windows 7 and cleaned all the partitions, but again after installing elementary os I can't get rid of it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me I really want to learn, and sorry for my week English.&lt;/p&gt;&#xA;" OwnerUserId="8352" LastActivityDate="2018-02-01T12:10:51.833" Title="How to remove full disk encryption?" Tags="|disk-management|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10438" PostTypeId="1" CreationDate="2017-01-29T15:22:11.323" Score="0" ViewCount="434" Body="&lt;p&gt;After recently installing Elementary Loki 0.4 I cannot seem to get WiFi to work and updates are stalled &quot;waiting for package manager lock&quot; after authentication. this seems to mean that I cannot load/update anything that might allow me to configure the wifi network connections. Is this a problem with my basic install? I see screenshots showing a configuration tool after &quot;installing upgrades&quot; , but cannot seem to get this to work!&lt;/p&gt;&#xA;" OwnerUserId="8353" LastActivityDate="2019-04-26T17:01:20.243" Title="Problems with WiFi after recent loading of Loki 0.4" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10442" PostTypeId="2" ParentId="10184" CreationDate="2017-01-29T18:06:53.150" Score="1" Body="&lt;p&gt;It is not possible to change the position of the clock on the greeter screen&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-01-29T18:06:53.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10443" PostTypeId="2" ParentId="9880" CreationDate="2017-01-29T20:34:58.683" Score="3" Body="&lt;p&gt;&lt;code&gt;f.lux&lt;/code&gt; is more reliable than &lt;code&gt;Redshift&lt;/code&gt; and has a wing panel icon to easily adjust the color and pause it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:nathan-renniewaldock/flux&#xA;sudo apt update&#xA;sudo apt install fluxgui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="13531" LastEditDate="2018-10-08T14:55:25.773" LastActivityDate="2018-10-08T14:55:25.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10444" PostTypeId="1" CreationDate="2017-01-29T23:16:05.833" Score="2" ViewCount="507" Body="&lt;p&gt;I recently installed Elementary OS 0.4, after doing some regular installations and updates, the &lt;em&gt;App Center&lt;/em&gt; (0.1.3) icons are missing, they have a gray gear instead. How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iKogD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iKogD.png&quot; alt=&quot;This is how it looks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8356" LastActivityDate="2017-02-02T20:06:00.133" Title="App Center missing icons on Loki" Tags="|release-loki|updates|icons|appcenter|" AnswerCount="1" CommentCount="0" ClosedDate="2017-02-03T21:24:09.257" ContentLicense="CC BY-SA 3.0" />
  <row Id="10445" PostTypeId="1" AcceptedAnswerId="10485" CreationDate="2017-01-30T01:12:28.103" Score="0" ViewCount="831" Body="&lt;p&gt;Recent (second) clean install of Loki freezes intermittently.  If left running, it would freeze 4-8 times per day.  If there is music playing, the music will sometimes continue normally while the screen is frozen, sometimes &quot;skip&quot;/1/2 second loop.  How to fix this stability issue?&lt;/p&gt;&#xA;" OwnerUserId="8358" LastActivityDate="2017-02-01T03:00:48.227" Title="Elementary Loki crashes frequently" Tags="|release-loki|crash|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10447" PostTypeId="1" CreationDate="2017-01-30T05:59:04.810" Score="1" ViewCount="634" Body="&lt;p&gt;Installed &lt;code&gt;alacarte&lt;/code&gt; menu editor, deleted &quot;Install Elementary OS&quot; icon, now when I try to search for an application, it crashes.  I also did an &lt;a href=&quot;/questions/tagged/update&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;update&amp;#39;&quot; rel=&quot;tag&quot;&gt;update&lt;/a&gt; &amp;amp; upgrade, so that may have caused it too perhaps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which logs should I paste here for help?  I found a bug report &lt;a href=&quot;https://bugs.launchpad.net/slingshot/+bug/1600705&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&#xA;but no fixes yet.  Except deleting &lt;code&gt;vim.desktop&lt;/code&gt; from &lt;code&gt;~/.local/share/applications&lt;/code&gt; which didn't exist for me.  However I did delete &lt;code&gt;~/usr/share/applications/vim.desktop&lt;/code&gt;, which did nothing.  Oh and I had like 5 desktop files in that same dir for &lt;code&gt;chrome&lt;/code&gt;, delete all them, did nothing.&lt;/p&gt;&#xA;" OwnerUserId="6694" LastEditorUserId="16827" LastEditDate="2019-01-07T17:51:44.790" LastActivityDate="2019-10-04T19:01:25.240" Title="Wingpanel crashes on search" Tags="|wingpanel|crash|search|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="10448" PostTypeId="1" CreationDate="2017-01-30T07:45:37.680" Score="1" ViewCount="167" Body="&lt;p&gt;I tried to get drivers for nvidia graphics card following this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7472/install-nvidia-dual-graphics-driver-on-loki&quot;&gt;post&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;&#xA;But the terminal seems to get stuck at &quot;Building generic module&quot;, It takes a long time...&lt;br/&gt;&lt;br/&gt;&#xA;Is it normal? If yes, how long does it take? &lt;br/&gt;(It is a fairly old laptop with 2 Gib RAM and an i7 processor, no SSD)&lt;/p&gt;&#xA;" OwnerUserId="8363" LastEditorUserId="16827" LastEditDate="2019-01-08T19:06:18.917" LastActivityDate="2019-01-08T19:06:18.917" Title="How long does it take to update driver in elementary OS?" Tags="|updates|graphic-drivers|drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10451" PostTypeId="1" CreationDate="2017-01-30T08:51:31.970" Score="0" ViewCount="295" Body="&lt;p&gt;I installed few weeks ago gnome-software to use instead of appcenter, because this one didn't work for me - it didn't update any package. Gnome-software did work fine until a couple of days ago, after OS updates it crashed and couldn't find it anymore in my installed apps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried and reinstall it with no success:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;I seguenti pacchetti hanno dipendenze non soddisfatte: &#xA;gnome-software : Dipende: appstream ma non sta per essere installato&#xA;E: Impossibile correggere i problemi, ci sono pacchetti danneggiati bloccati.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which means that there's a problem with damaged or blocked packages (appstream). But this package is correctly installed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;from /var/lib/dkpg/status&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package: appstream&#xA;Status: install ok installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help. &lt;/p&gt;&#xA;" OwnerUserId="7585" LastEditorUserId="578" LastEditDate="2017-02-05T09:46:19.357" LastActivityDate="2017-02-05T09:46:19.357" Title="gnome-software corrupted and cannot reinstall" Tags="|appcenter|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10452" PostTypeId="1" AcceptedAnswerId="10453" CreationDate="2017-01-30T10:16:28.253" Score="0" ViewCount="398" Body="&lt;p&gt;Is there a tool that can be added to Pantheon Files context menu for the purpose of downloading video subtitles?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-02-07T10:34:19.107" Title="Context menu to download subtitles in Pantheon Files" Tags="|pantheon-files|videos|subtitles|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10453" PostTypeId="2" ParentId="10452" CreationDate="2017-01-30T10:22:37.483" Score="2" Body="&lt;p&gt;Just like &lt;a href=&quot;https://github.com/exebetche/vlsub&quot; rel=&quot;nofollow noreferrer&quot;&gt;VLSub&lt;/a&gt;, the solutions below can search &lt;strong&gt;both by hash and name&lt;/strong&gt; (on that aspect, more &lt;a href=&quot;https://askubuntu.com/a/267509/47206&quot;&gt;here&lt;/a&gt;), but &lt;a href=&quot;https://stackoverflow.com/a/29049184/4098390&quot;&gt;unlike VLSub&lt;/a&gt;, they can be added to a file manager's context menu. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/emericg/OpenSubtitlesDownload&quot; rel=&quot;nofollow noreferrer&quot;&gt;the OpenSubtitlesDownload.py script&lt;/a&gt; - download and save it in a specific directory.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It is designed for Nautilus but it works in Pantheon Files by creating a contract file for it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/opensubtitles.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Download subtitles&#xA;MimeType=video/*&#xA;Exec=sh -c &quot;path/to/OpenSubtitlesDownload.py %f&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/d7rXv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d7rXv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This script is (along VLSub with VLC) one of the most effective, as it searches both by hash and name, as indicated &lt;a href=&quot;https://askubuntu.com/a/267509/47206&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pBNQk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pBNQk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;FileBot &lt;a href=&quot;http://www.filebot.net/cli.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;command-line version&lt;/a&gt;.&lt;/strong&gt; It needs Java to be installed.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The general command is &lt;code&gt;filebot -get-subtitles /path/to/video/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;search also by name (beside hash)&lt;/strong&gt; the &lt;code&gt;-non-strict&lt;/code&gt; option should be used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To download English subtitles no language option is needed, but for other languages there is the option &lt;code&gt;--lang&lt;/code&gt; with the 2 or 3 letter &lt;a href=&quot;https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes#Partial_ISO_639_table&quot; rel=&quot;nofollow noreferrer&quot;&gt;language code&lt;/a&gt;, but only one language can be specified per command, so you have to use separate commands for each language.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To rename the media files (using TMDb) and match their names, a useful option is &lt;code&gt;-rename&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command can be added to context menu in a &lt;code&gt;contract&lt;/code&gt; file; for French it should be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/opensubtitles-FR.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Download French subtitles&#xA;MimeType=video/*;inode;&#xA;Exec=pantheon-terminal -e &quot;filebot -get-subtitles  --lang fr -rename -non-strict %f&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vA8EV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vA8EV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Z0CYF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z0CYF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to &lt;strong&gt;download subtitles for multiple videos at once&lt;/strong&gt;, put those in a folder and the option can be applied to that folder, and it will download for all of them.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://subliminal.readthedocs.io/en/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Subliminal&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Very similar to &lt;code&gt;filebot&lt;/code&gt; is &lt;code&gt;subliminal&lt;/code&gt;, said to search &lt;a href=&quot;https://subliminal.readthedocs.io/en/latest/user/how_it_works.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;more databases&lt;/a&gt; than just opensubtitles. That's why it takes a bit more time to search, but it may worth the waiting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add it to custom menu, follow the same steps as for &lt;code&gt;filebot&lt;/code&gt;, but add after in the &lt;code&gt;Exec=&lt;/code&gt; line the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-terminal -e &quot;subliminal download -l en %f&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(that's for English)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-05-23T12:39:19.520" LastActivityDate="2017-02-07T10:34:19.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10454" PostTypeId="1" CreationDate="2017-01-30T10:49:09.197" Score="1" ViewCount="103" Body="&lt;p&gt;How long Elementary OS Loki will be supported?&lt;/p&gt;&#xA;" OwnerUserId="8068" LastActivityDate="2017-01-30T10:49:09.197" Title="Support for Elementary os Loki?" Tags="|release-loki|updates|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-03T21:28:58.657" ContentLicense="CC BY-SA 3.0" />
  <row Id="10458" PostTypeId="1" AcceptedAnswerId="10597" CreationDate="2017-01-30T15:10:21.767" Score="0" ViewCount="7855" Body="&lt;p&gt;&lt;em&gt;(x-post from reddit: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5qy9y9/how_do_i_fixcalibrate_my_screen_colors/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/5qy9y9/how_do_i_fixcalibrate_my_screen_colors/&lt;/a&gt;)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just switched to elementary yesterday and I absolutely love it. There's a problem, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go on Twitter in Firefox, my profile picture (&lt;a href=&quot;https://pbs.twimg.com/profile_images/819743601831841794/5k22sTXF_400x400.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pbs.twimg.com/profile_images/819743601831841794/5k22sTXF_400x400.jpg&lt;/a&gt;) appears purple instead of blue. The weird thing is that my cover photo, which uses the same blue (&lt;a href=&quot;https://pbs.twimg.com/profile_banners/477405869/1484277064&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pbs.twimg.com/profile_banners/477405869/1484277064&lt;/a&gt;) is perfectly fine. There's obviously some issue with image compression or something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either way, both images appeared to be the same blue in Firefox in Xubuntu and Windows, so the color issue lies with elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I tilt my laptop backward, the blues match again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I poked around in the system settings' color panel, but I don't see anything that could help me. I even installed the GNOME Color Profile Viewer, but I don't know how to use it and I'm afraid I'll mess something up if I mess around with the settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I fix/calibrate my screen colors?&lt;/p&gt;&#xA;" OwnerUserId="8357" LastEditorUserId="8357" LastEditDate="2017-02-07T21:12:15.570" LastActivityDate="2019-05-29T17:29:46.577" Title="How do I fix/calibrate my screen colors?" Tags="|settings|display|color-format|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10459" PostTypeId="1" CreationDate="2017-01-30T15:27:27.997" Score="2" ViewCount="320" Body="&lt;p&gt;So here's the deal, I want to be able to type &quot;ë&quot; using shift+&quot;+e. This can't be done with the keyboard layouts in elementary OS, I've tried changing it to US International and Alternative International but still I can't type &quot;ë&quot; easily. Does anyone know how to fix this or add keyboard layouts that correspond with the layout of windows version of US International?&lt;/p&gt;&#xA;" OwnerUserId="8368" LastEditorUserId="578" LastEditDate="2017-01-30T17:18:44.010" LastActivityDate="2017-02-01T14:56:30.497" Title="How to type &quot;ë&quot; using shift+e? (as in US international layout Windows version)" Tags="|keyboard|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10460" PostTypeId="1" CreationDate="2017-01-30T16:38:48.723" Score="0" ViewCount="89" Body="&lt;p&gt;Do not appear the videos are stored to my SD card when I try to share by using sharing the Media library that comes by default in the system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;change the route but do not appear with the titles stored there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;what can I do? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8Lk5w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8Lk5w.png&quot; alt=&quot;capture&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pd: I can access my SD card perfectly from my system. There is no complication, I can create folders and open documents, and videos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you. &lt;/p&gt;&#xA;" OwnerUserId="8325" LastActivityDate="2019-04-27T18:01:40.733" Title="to share videos stored on my sd card to smartv &quot;do not appear&quot;" Tags="|release-loki|sharing|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10462" PostTypeId="2" ParentId="10459" CreationDate="2017-01-30T22:00:20.237" Score="2" Body="&lt;p&gt;In Linux the layouts are not exactly the same as in Windows, I think, but for English US (if that is what you need) you have &lt;em&gt;English US alternative  International, English US International with dead keys, English US International Algr dead keys&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Dead keys are symbols that in order to be used have to be followed by &lt;kbd&gt;Space&lt;/kbd&gt;; followed by other keys, they add &lt;a href=&quot;https://en.wikipedia.org/wiki/Diacritic&quot; rel=&quot;nofollow noreferrer&quot;&gt;diacritics&lt;/a&gt; to these keys&lt;/em&gt;; the dead-keys resemble the diacritics they trigger, and therefore are easy to remember: &lt;code&gt;&amp;quot;&lt;/code&gt;+&lt;code&gt;a&lt;/code&gt;=&lt;code&gt;ä&lt;/code&gt;, &lt;code&gt;^&lt;/code&gt;+&lt;code&gt;a&lt;/code&gt;= &lt;code&gt;â&lt;/code&gt;, etc.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;English US alternative  International&lt;/strong&gt; and  &lt;strong&gt;English US International with dead keys&lt;/strong&gt; seem almost identical.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;&amp;quot;&lt;/code&gt;, which is a dead key, followed by &lt;code&gt;e&lt;/code&gt; gives &lt;code&gt;ë&lt;/code&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;If you don't want to switch keyboards and use one that doesn't have those dead keys, you can try &lt;strong&gt;English US International Algr dead keys&lt;/strong&gt;, where dead keys appear only with &lt;kbd&gt;Altgr&lt;/kbd&gt;. There &lt;code&gt;ë&lt;/code&gt; is done with  &lt;kbd&gt;Altgr&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;r&lt;/kbd&gt;, as seen here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q7hU8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q7hU8.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;As for &lt;code&gt;ë&lt;/code&gt; made with &lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;E&lt;/kbd&gt; I have not found any English US QWERTY layout that does that.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-01T14:56:30.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10463" PostTypeId="1" CreationDate="2017-01-30T23:21:44.150" Score="2" ViewCount="639" Body="&lt;p&gt;I've installed elementary OS 0.4 Loki (64-bit) on my desktop PC and I'm using an Apple Magic Keyboard via USB and/or Bluetooth.&#xA;Everything works fine but I can't use the &lt;code&gt;fn&lt;/code&gt; key to get to input things like forward delete and so on...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard works with no problems via Bluetooth or USB on my MacBook air.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been searching on google and this stackexchange page but I can only find people complaining about pairing via Bluetooth and all the links point to this doc page: &lt;a href=&quot;https://help.ubuntu.com/community/AppleKeyboard&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/AppleKeyboard&lt;/a&gt;&#xA;None of the solutions there seem to work.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As mike-wild suggested, I tried using &lt;code&gt;xev&lt;/code&gt; &#xA;No matter if I press Backspace or &lt;code&gt;fn&lt;/code&gt; + &lt;code&gt;Backspace&lt;/code&gt; the output is the same:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;KeyRelease event, serial 37, synthetic NO, window 0x2c00001, root 0xf4,     subw 0x0, time 138447, (270,71), root:(1194,356), state 0x0, keycode 22 (keysym 0xff08, BackSpace), same_screen YES, XLookupString gives 1 bytes: (08) &quot; XFilterEvent returns: False –&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm now wondering, do I need any specific driver? How come Macbooks + elementary have the &lt;code&gt;fn&lt;/code&gt; key working but mine doesn't?&lt;/p&gt;&#xA;" OwnerUserId="8372" LastEditorUserId="8372" LastEditDate="2017-02-01T02:34:44.037" LastActivityDate="2017-02-01T02:34:44.037" Title="FN key on Apple Magic Keyboard via USB not working" Tags="|keyboard|usb|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10464" PostTypeId="1" CreationDate="2017-01-31T00:43:16.823" Score="2" ViewCount="3600" Body="&lt;p&gt;all of a sudden cheese does not work. &#xA;Webcam does not work (never tried it until now)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gucview works&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;running cheese in root mode works &lt;code&gt;gksu cheese&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;skype seems to work but not tested realtime&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Possible cause.. &#xA;I remember following instructions here for a bug to get a program to work or apt to install something it was refusing to install (not sure how to find it or what that program that did not work was).&#xA;But it said to delete something and then to reinstall skype and another thing.&#xA;This other thing was not installed so I did not reinstall or install it.&#xA;I am quite vague on this sorry.  But maybe the person here remembers and I can find the link and install that software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output from entering cheese in term&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ cheese&#xA;** Message: cheese-application.vala:211: Error during camera setup: No device found&#xA;&#xA;&#xA;(cheese:8126): cheese-CRITICAL **: cheese_camera_device_get_name: assertion 'CHEESE_IS_CAMERA_DEVICE (device)' failed&#xA;&#xA;(cheese:8126): GLib-CRITICAL **: g_variant_new_string: assertion 'string != NULL' failed&#xA;&#xA;(cheese:8126): GLib-GIO-CRITICAL **: g_settings_schema_key_type_check: assertion 'value != NULL' failed&#xA;&#xA;(cheese:8126): GLib-CRITICAL **: g_variant_get_type_string: assertion 'value != NULL' failed&#xA;&#xA;(cheese:8126): GLib-GIO-CRITICAL **: g_settings_set_value: key 'camera' in 'org.gnome.Cheese' expects type 's', but a GVariant of type '(null)' was given&#xA;&#xA;** (cheese:8126): CRITICAL **: cheese_preferences_dialog_setup_resolutions_for_device: assertion 'device != NULL' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is the output if I gksu cheese (&lt;strong&gt;REMEMBER, THIS WORKS THOUGH&lt;/strong&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ gksu cheese&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and here is the output from entering guvcview in term&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ guvcview&#xA;GUVCVIEW: version 2.0.2&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;V4L2_CORE: (UVCIOC_CTRL_MAP) Error: No such file or directory&#xA;ALSA lib pcm.c:2266:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear&#xA;ALSA lib pcm.c:2266:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe&#xA;ALSA lib pcm.c:2266:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side&#xA;ALSA lib pcm_route.c:867:(find_matching_chmap) Found no matching channel map&#xA;ALSA lib pcm_route.c:867:(find_matching_chmap) Found no matching channel map&#xA;ALSA lib pcm_route.c:867:(find_matching_chmap) Found no matching channel map&#xA;ALSA lib pcm_route.c:867:(find_matching_chmap) Found no matching channel map&#xA;connect(2) call to /dev/shm/jack-1000/default/jack_0 failed (err=No such file or directory)&#xA;attempt to connect to server failed&#xA;&#xA;(guvcview:8185): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -43 and height 17&#xA;&#xA;(guvcview:8185): Gtk-CRITICAL **: gtk_distribute_natural_allocation: assertion 'extra_space &amp;gt;= 0' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-01-31T14:07:58.550" LastActivityDate="2019-08-24T15:01:25.137" Title="camera and cheese not working" Tags="|webcam|camera|" AnswerCount="1" CommentCount="13" ContentLicense="CC BY-SA 3.0" />
  <row Id="10465" PostTypeId="1" CreationDate="2017-01-31T06:35:12.437" Score="0" ViewCount="203" Body="&lt;h1&gt;PREREQUISITES&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;nimf&lt;/code&gt; is a software input method like &lt;code&gt;ibus&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Evince is the default document viewer in eOS.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I have installed &lt;code&gt;nimf&lt;/code&gt; recently then noticed that Evince is not starting as quick as usual (delayed start for about 15 seconds with 0 CPU use). I have run it on the terminal to see what was going on, then found some log messages that are seemingly associated with &lt;code&gt;nimf&lt;/code&gt;. I have removed &lt;code&gt;nimf&lt;/code&gt; entirely from my computer, and it worked just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I prefer &lt;code&gt;nimf&lt;/code&gt; over &lt;code&gt;ibus&lt;/code&gt; because it &lt;em&gt;just works&lt;/em&gt; once you install, unlike &lt;code&gt;ibus&lt;/code&gt; that I have had to figure out this and that to get it working. However, given that Evince is one of the most beautiful apps in eOS and better than Adobe Reader (for being snappy and lightweight + touchscreen support) and Chrome's built-in reader (for not being a CPU hog on my HiDPI display), not being able to use both together at the same time is pretty frustrating.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has this bug filed already? Should I file one now? How can I get both of them working together?&lt;/p&gt;&#xA;" OwnerUserId="3843" LastActivityDate="2017-02-02T11:02:39.047" Title="Evince slow start with &quot;nimf&quot; installed" Tags="|release-loki|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10467" PostTypeId="1" AcceptedAnswerId="10471" CreationDate="2017-01-31T08:12:53.590" Score="0" ViewCount="166" Body="&lt;p&gt;I guess this may be a repost, but I'm using a very good pc(i7-4720HQ, 8gb ram, gtx 950m 4gb) and after I enter my password is taking like 1-2 min for dock and wingpanel to show up. Does anyone know why is this taking so much?&lt;/p&gt;&#xA;" OwnerUserId="8086" LastActivityDate="2017-01-31T10:56:51.300" Title="Too long to power up" Tags="|wingpanel|plank|startup|cpu|asus|" AnswerCount="1" CommentCount="0" ClosedDate="2017-02-02T08:20:59.313" ContentLicense="CC BY-SA 3.0" />
  <row Id="10468" PostTypeId="1" AcceptedAnswerId="10470" CreationDate="2017-01-31T09:08:40.790" Score="2" ViewCount="1294" Body="&lt;p&gt;So I'm writing a bash script that pulls a background picture from the web and sets it as the desktop wallpaper. I've managed to change the desktop background which is fairly easy by just running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///path/to/file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but this does not have the same effect as right clicking a photo and choosing &quot;set as desktop background&quot;. Using the right click method the login screen background changes too, but using gsettings I can't get the login screen background to change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've read about pantheon-greeter and it's .conf files in /etc/lightdm, but I don't want to use that method because all those files need root permissions to be edited. Clearly, if I can just right click a picture and set it as background I don''t need root permissions. Can anyone help me find a way to do that using the terminal? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="8377" LastEditorUserId="578" LastEditDate="2017-02-05T09:45:48.793" LastActivityDate="2017-02-05T09:45:48.793" Title="How do I change desktop + login background using terminal WITHOUT root permissions?" Tags="|pantheon-terminal|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10470" PostTypeId="2" ParentId="10468" CreationDate="2017-01-31T10:43:48.483" Score="1" Body="&lt;p&gt;Hopefully someone can answer with the correct way to do this via &lt;em&gt;gsettings&lt;/em&gt;, but under the hood the wallpaper contract is actually provided by a handy script called &lt;code&gt;set-wallpaper&lt;/code&gt;. The following will change the background for your user on the desktop and login screen:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set-wallpaper &amp;lt;image-path&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've just tested this myself - no root permissions needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The corresponding code can be found &lt;a href=&quot;https://bazaar.launchpad.net/~elementary-apps/switchboard-plug-pantheon-shell/trunk/view/head:/set-wallpaper-contract/set-wallpaper.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. I can see the call to gsettings, but can't see anything else being done (though I haven't looked too hard) - so I'm unsure why just setting it via gsettings doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: There's a &lt;code&gt;copy_for_greeter()&lt;/code&gt; method in there which copies the image to &lt;code&gt;/var/lib/lightdm-data/$USER&lt;/code&gt;, so I guess &lt;em&gt;gsettings&lt;/em&gt; does work, but you need to ensure that you copy the image to somewhere where LightDM can access it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if you want to do this via gsettings then the following should work:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp &amp;lt;background-image&amp;gt; $XDG_GREETER_DATA_DIR&#xA;gsettings set org.gnome.desktop.background picture-uri file:/$XDG_GREETER_DATA_DIR/&amp;lt;background-image&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However &lt;code&gt;set-wallpaper&lt;/code&gt; does all of this heavy-lifting for you, so I'd recommend using that.&lt;/p&gt;&#xA;" OwnerUserId="5722" LastEditorUserId="5722" LastEditDate="2017-01-31T10:50:37.207" LastActivityDate="2017-01-31T10:50:37.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10471" PostTypeId="2" ParentId="10467" CreationDate="2017-01-31T10:56:51.300" Score="3" Body="&lt;p&gt;This is a bug with DBus - see the answer I posted &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10272/5722&quot;&gt;here&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially DBus is preventing everything from starting up, so until that's fixed you need to rename the file causing issues:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5722" LastActivityDate="2017-01-31T10:56:51.300" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10472" PostTypeId="1" CreationDate="2017-01-31T11:10:13.153" Score="3" ViewCount="4060" Body="&lt;p&gt;I have a problem with missing icons - I first noticed they disappeared after one of the recent upgrades to Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Calendar, Camera, KsystemLog, Screenshot, Videos, Photos and Mail icons missing in Applications. There is a growing sense this list varies but I can't be sure...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They are all fine in plank (though Mail and Calendar seem to share the same icon)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are also icons missing in System Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications, Device Colour Profile, Power, Sound, Online Accounts, Date &amp;amp; time, Parental Control&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The missing icons appear as a grey box with bottom left turn up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried &quot;restore default settings&quot; as suggested in a similar question with no difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to resolve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="5829" LastActivityDate="2024-03-20T17:07:25.953" Title="Missing icons in Applications and System Settings in Loki" Tags="|release-loki|icons|slingshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10473" PostTypeId="2" ParentId="8269" CreationDate="2017-01-31T11:25:04.847" Score="6" Body="&lt;p&gt;I have archived old versions of Elementary OS and I published them online: &lt;a href=&quot;http://osarchive.sda1.eu/elementary-os&quot; rel=&quot;noreferrer&quot;&gt;http://osarchive.sda1.eu/elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8380" LastActivityDate="2017-01-31T11:25:04.847" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10478" PostTypeId="2" ParentId="9281" CreationDate="2017-01-31T20:12:06.387" Score="2" Body="&lt;p&gt;To set the Windows key use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings panel-main-menu &quot;['Super_L']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't like the change (as I), you can reset it with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings reset org.gnome.desktop.wm.keybindings panel-main-menu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to check this &lt;a href=&quot;https://mylinuxevolution.wordpress.com/elementary-os-loki-post-installation-tutorials/&quot; rel=&quot;nofollow noreferrer&quot;&gt;tutorial&lt;/a&gt;, it has some neat tweaks for Loki.&lt;/p&gt;&#xA;" OwnerUserId="8387" LastActivityDate="2017-01-31T20:12:06.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10479" PostTypeId="1" AcceptedAnswerId="10489" CreationDate="2017-01-31T20:45:35.573" Score="0" ViewCount="681" Body="&lt;p&gt;So,i'm in the middle of the OS installation,and in the part where i should be able to choose the drive where i install it it wont let me choose the one where windows 10 is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It just shows  another one i have that is empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the only way i can manage to use the drive where windows is,is trough the manual partitioning method.&#xA;The thing i want to do is pretty straight forward,i want to install elementary in my os drive (270 gb of free space approx) and let my other drive (500 gb of free space) be available for both os for storing several data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible and how should i go about doing it?&#xA;Or can anyone lead me to a guide for doing it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="8388" LastEditorUserId="578" LastEditDate="2017-02-05T09:33:12.573" LastActivityDate="2017-02-05T09:33:12.573" Title="I need help in doing the partitions for the installation process" Tags="|system-installation|dual-boot|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10480" PostTypeId="1" CreationDate="2017-01-31T20:50:17.590" Score="1" ViewCount="423" Body="&lt;p&gt;...in Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else observed this, is it a reported issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed this connecting a Wiimote to Loki the other day... I kept getting 'unable to connect messages' using wminput. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lo and behold while the indicator was bold and the switch set to the 'on' position in Wingpanel, the same was not true in System Settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In summary, System Settings toggles Bluetooth in Wingpanel, but not vice versa.&lt;/p&gt;&#xA;" OwnerUserId="8234" LastActivityDate="2018-12-25T19:02:10.610" Title="Toggling Bluetooth on Wingpanel does not toggle Bluetooth in settings" Tags="|release-loki|settings|bluetooth|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-20T05:50:12.300" ContentLicense="CC BY-SA 3.0" />
  <row Id="10481" PostTypeId="2" ParentId="10480" CreationDate="2017-01-31T21:19:00.447" Score="0" Body="&lt;p&gt;A fix for this bug was &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-the-new-year-ff6b6ba65531#f5d7&quot; rel=&quot;nofollow noreferrer&quot;&gt;just released&lt;/a&gt;. Running an update in AppCenter and then restarting should fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Edit: the fixes for bugs &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-bluetooth/+bug/1607475&quot; rel=&quot;nofollow noreferrer&quot;&gt;1607475&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-bluetooth/+bug/1600520&quot; rel=&quot;nofollow noreferrer&quot;&gt;1600520&lt;/a&gt; should in theory have fixed the problem, but the issue persists. I'm able to reproduce the problem on my machine. I've asked in one of the tickets whether it would be helpful to file a new ticket or reopen one of the existing ones.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2017-02-01T17:02:14.380" LastActivityDate="2017-02-01T17:02:14.380" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10482" PostTypeId="1" CreationDate="2017-01-31T22:46:44.950" Score="1" ViewCount="237" Body="&lt;p&gt;I have a HP laptop which has the coolsense software installed.&#xA;I haven't found information about if elementary OS has this type of software or similar to avoid high temperature in the machine.&#xA;Anyone could solve my doubt, please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&#xA;Regards&lt;/p&gt;&#xA;" OwnerUserId="8392" LastEditorUserId="578" LastEditDate="2017-02-01T09:26:00.780" LastActivityDate="2024-03-27T12:02:15.243" Title="Fan control in HP folio 13 with coolsense for windows installed" Tags="|laptop|temperature|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10484" PostTypeId="1" AcceptedAnswerId="10488" CreationDate="2017-02-01T01:44:50.690" Score="1" ViewCount="176" Body="&lt;p&gt;I know I can enable and disable it but once enabled, the guest session has this white/blue user profile picture. I would like to change this image, is it currently possible ? Any way to do it manually ?&lt;/p&gt;&#xA;" OwnerUserId="8394" LastActivityDate="2017-02-01T09:22:04.553" Title="How can I change the guest session profile picture" Tags="|user|profile|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10485" PostTypeId="2" ParentId="10445" CreationDate="2017-02-01T03:00:48.227" Score="1" Body="&lt;p&gt;I just tried running an Arch system via live USB and it crashed the same way elementary has been.  I conclude it must be a hardware issue.&lt;/p&gt;&#xA;" OwnerUserId="8358" LastActivityDate="2017-02-01T03:00:48.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10486" PostTypeId="2" ParentId="10451" CreationDate="2017-02-01T07:11:26.200" Score="1" Body="&lt;p&gt;I found the problem: on elementary loki, gnome software 3.20 and appstream 0.10.6 together doesn't work. I had to downgrade appstream to version 0.10.3 to make gnome software working again.&lt;/p&gt;&#xA;" OwnerUserId="7585" LastActivityDate="2017-02-01T07:11:26.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10487" PostTypeId="2" ParentId="10482" CreationDate="2017-02-01T09:16:21.807" Score="0" Body="&lt;p&gt;You can use either the &lt;code&gt;tlp&lt;/code&gt; or &lt;code&gt;thermald&lt;/code&gt; softwares, or both.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TLP is an advanced power management tool for Linux. It comes with a&#xA; default configuration already optimized for battery life. At the same&#xA; time it is highly customizable to fulfil specific user requirements.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thermal Daemon is a Linux daemon for monitoring and&#xA; controlling platform temperatures. Once the system&#xA; temperature reaches a certain threshold, the Linux daemon&#xA; activates various cooling methods to try to cool the system.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install thermald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-01T09:16:21.807" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10488" PostTypeId="2" ParentId="10484" CreationDate="2017-02-01T09:22:04.553" Score="2" Body="&lt;p&gt;I guess you need a combination of&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24/how-do-i-change-my-user-profile-picture?rq=1&quot;&gt;How do I change my user profile picture?&lt;/a&gt; and&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9069/how-can-i-have-the-same-applications-in-the-dock-for-the-guest-session-as-i-have?rq=1&quot;&gt;How can I have the same applications in the Dock for the Guest session as I have in the Administrator account?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-01T09:22:04.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10489" PostTypeId="2" ParentId="10479" CreationDate="2017-02-01T12:09:03.313" Score="1" Body="&lt;p&gt;First of all you need to create a new partition on your os drive. You can shrink your Windows partition using the Disks Management Tool that comes on Windows. &#xA;Then just leave the empty space you want for elementary. You need 10 GiB at least, but I'd recommend to have 30 Gib or more to have some extra space to install programs. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now Reboot, then plug your elementary OS bootlable USB and install it. You can also go into advanced settings on Windows 8-10 and select &quot;reboot and boot from usb&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, when you reach the partitioning stage you should be able to format that empty space and create a new Ext4 partition. Just set it as &lt;code&gt;/&lt;/code&gt; so that elementary OS is installed there. If you have less than 8 Gib of RAM you should also create a SWAP partition of the same size as your RAM.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-01T12:09:03.313" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10490" PostTypeId="2" ParentId="8927" CreationDate="2017-02-01T14:55:49.067" Score="0" Body="&lt;p&gt;a simple solution may be: &#xA;1. go to system settings -&gt; power.&#xA;2. enable hibernate for power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;everytime you want to hibernate the system, just press power button.&lt;/p&gt;&#xA;" OwnerUserId="8406" LastActivityDate="2017-02-01T14:55:49.067" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10491" PostTypeId="1" CreationDate="2017-02-01T15:01:48.083" Score="3" ViewCount="1099" Body="&lt;p&gt;I added both the Spanish default keyboard layout and the Spanish with dead keys layout from System Settings, but in most applications,when I try to do an accentuated á vowel, in turn it writes: ´a. In some other cases, like in Telegram, the ´ symbol does not appear at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried updating, removing all layouts, and what this question suggests on AskUbuntu: &lt;a href=&quot;https://askubuntu.com/questions/774237/dead-keys-accents-stopped-working-after-upgrading-to-ubuntu-16-04&quot;&gt;https://askubuntu.com/questions/774237/dead-keys-accents-stopped-working-after-upgrading-to-ubuntu-16-04&lt;/a&gt;, which is to run &lt;code&gt;ibus-setup&lt;/code&gt; and following the instructions, but none worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running elementary OS 0.4 Loki (Ubuntu 16.04 LTS)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="8405" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-03-04T00:11:02.147" Title="Dead keys not working on Elementary OS Loki" Tags="|keyboard|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10492" PostTypeId="1" AcceptedAnswerId="10494" CreationDate="2017-02-01T20:41:48.950" Score="3" ViewCount="1042" Body="&lt;p&gt;Is it possible to install Elementary OS on an Intel Compute stick &lt;strong&gt;or  equivalent low spec hardware&lt;/strong&gt;.  Not old hardware, but a mini fanless PC of some sort that you can currently buy on the market.  Also would there be compatible drivers to support that device?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Compute stick Compatible OSs (Ubuntu and Linuxium):&#xA;&lt;a href=&quot;http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-compute-stick/000005899.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.intel.com/content/www/us/en/support/boards-and-kits/intel-compute-stick/000005899.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Surely other distros would be compatible also.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment of writing, Elementary OS doesn't support ARM, so no android or Rasberry Pi:&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1437/support-for-arm-processors-and-raspberry-pi&quot;&gt;Support for ARM processors and Raspberry Pi?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS Recommended Specs:&#xA;&lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#recommended-system-specifications&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I found a way&lt;/strong&gt; to install Elementary OS on Chromebooks:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/783/any-problems-installing-elementary-os-freya-on-an-acer-chromebook-15-cb5-571-c4t?rq=1&quot;&gt;Any problems installing elementary OS Freya on an Acer Chromebook 15 CB5-571-C4T3?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2041/i-want-install-elementary-os-on-chromebook-any-help?noredirect=1&amp;amp;lq=1&quot;&gt;I want install elementary OS on Chromebook any help?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8410" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-02T06:47:13.907" Title="Install Elementary OS on Intel Compute stick/low spec device onto SSD" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10493" PostTypeId="2" ParentId="10003" CreationDate="2017-02-01T23:00:06.253" Score="0" Body="&lt;p&gt;Yeah I upgraded to 4.9 on my skylake laptop with no issues at all. As others said, you retain the ability to boot from the stock kernel with grub.&lt;/p&gt;&#xA;" OwnerUserId="8414" LastActivityDate="2017-02-01T23:00:06.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10494" PostTypeId="2" ParentId="10492" CreationDate="2017-02-01T23:04:52.150" Score="3" Body="&lt;p&gt;If it supports Ubuntu then it supports Elementary OS as well (Loki is based on Xenial).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe that it should work properly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I see that some models support only 32-bit systems -  Loki is only for 64-bit. (That nmght be the problem)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it comes to drivers - it is possible that there are no drivers for e.g. Sound card, but in most cases there are all drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I know these intel sticks have USB ports, so maybe just try elementary live from USB and see if it works properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember that I had one of these sticks and I had problem with preinstalled windows 10 - after first start it downloaded updates that were bigger than disk space so it got stuck in 'broken mode'. I used ubuntu then to run it somehow, but finally I returned it to the store, because it had a problem that it would reset all the time as if there were some power off cuts.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-01T23:04:52.150" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10495" PostTypeId="2" ParentId="10491" CreationDate="2017-02-01T23:28:16.693" Score="1" Body="&lt;p&gt;I have a mixed bag of input methods using xkb the default and ibus for pali sanskrit keyboard using alt + space.  you can try following the instructions at this link here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2371/how-can-i-use-ibus-as-the-default-input-method&quot;&gt;How can I use IBus as the default input method?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look for the second answer too.  You will also need to install another file to get ibus working in gtk.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You also have to install the package ibus-qt4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you IBus to automatically start with the system, then go to Settings &gt; Applications &gt; Startup and add ibus-daemon -drx as a custom command.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-01T23:28:16.693" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10496" PostTypeId="2" ParentId="9364" CreationDate="2017-02-02T10:17:14.610" Score="1" Body="&lt;p&gt;I uninstalled all of the Nvidia Drivers through the terminal in recovery mode. Then I installed nvidia-331 (a more stable version), with &#xA;&lt;code&gt;sudo apt-get install nvidia-331&lt;/code&gt; and then rebooted into the UI. Currently the brightness doesn't work and the scaling is off, but it's a start. &lt;/p&gt;&#xA;" OwnerUserId="6861" LastEditorUserId="6861" LastEditDate="2019-06-13T21:16:21.277" LastActivityDate="2019-06-13T21:16:21.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10497" PostTypeId="2" ParentId="10465" CreationDate="2017-02-02T10:31:27.067" Score="1" Body="&lt;p&gt;It is a known bug with evince in Ubuntu with Debian.&#xA;This is the report of nimf developer against evince in launchpad.&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1569863&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1569863&lt;/a&gt;&#xA;I think evince team should reply to report to fix this issue.&#xA;Alternative Input Method is uim-byeoru, It has no issue in Loki.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install uim uim-byeoru&#xA;im-config -n uim&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and This is for settings&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uim-pref-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or find &quot;uim&quot; in slingshot after logout &amp;amp; login, I hope it might help you &lt;a href=&quot;https://youtu.be/q9QntqhecSk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/q9QntqhecSk&lt;/a&gt; :)&lt;/p&gt;&#xA;" OwnerUserId="355" LastEditorUserId="160" LastEditDate="2017-02-02T11:02:39.047" LastActivityDate="2017-02-02T11:02:39.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10500" PostTypeId="2" ParentId="10003" CreationDate="2017-02-02T12:38:03.803" Score="1" Body="&lt;p&gt;I was able to install 4.9 on my machine without issue. I used Ukuu which makes the process fairly painless and allows you to easily revert back if you have issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-02T12:38:03.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10501" PostTypeId="1" CreationDate="2017-02-02T12:52:03.003" Score="1" ViewCount="1384" Body="&lt;p&gt;It's not possible at the moment to add iCloud calendars via CalDav. I know the url to use, based on &lt;a href=&quot;https://www.nico-beuermann.de/blogg...ng_selected]=en&amp;amp;serendipity[user_language]=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.nico-beuermann.de/blogg...ng_selected]=en&amp;amp;serendipity[user_language]=en&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At least it should be possible to use the public published url, but that doesn't work: you're not allowed to add a calendar without authentication. If you just add a username, you'll get a http 500 error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know how to fix this ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards,&#xA; Frederik&lt;/p&gt;&#xA;" OwnerUserId="8420" LastActivityDate="2018-10-19T11:29:20.640" Title="maya calendar + icloud" Tags="|release-loki|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10502" PostTypeId="1" AcceptedAnswerId="10506" CreationDate="2017-02-02T13:51:32.573" Score="1" ViewCount="502" Body="&lt;p&gt;Will Apache2.4, PHP and OpenJDK 8 JRE run well with elementary OS Loki?&lt;/p&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="578" LastEditDate="2017-02-04T10:23:00.923" LastActivityDate="2017-02-04T10:23:00.923" Title="Can Apache 2.4, PHP be installed and used with elementary OS?" Tags="|web-development|php|java|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10503" PostTypeId="1" CreationDate="2017-02-02T14:58:02.917" Score="1" ViewCount="501" Body="&lt;p&gt;Can elementary Loki be added to MS Active Directory using something like &lt;a href=&quot;https://www.centrify.com/express/linux-unix/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Centrify&lt;/a&gt;?&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2017-02-02T14:58:02.917" Title="Can elementary Loki be added to MS Active Directory?" Tags="|release-loki|system-installation|settings|microsoft-windows|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10504" PostTypeId="1" AcceptedAnswerId="10508" CreationDate="2017-02-02T15:03:40.920" Score="0" ViewCount="829" Body="&lt;p&gt;&lt;code&gt;apt update&lt;/code&gt; gives me this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ignoring file '20auto-upgrades.ucf-dist' in directory '/etc/apt/apt.conf.d/' as it has an invalid filename extension&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-02T16:58:08.317" LastActivityDate="2017-02-02T16:58:08.317" Title="What does this error mean? (&quot;Ignoring file '20auto-upgrades.ucf-dist'&quot;)" Tags="|release-loki|apt|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10506" PostTypeId="2" ParentId="10502" CreationDate="2017-02-02T15:25:22.380" Score="1" Body="&lt;p&gt;They should run fine! These applications all work on Ubuntu. In general, software that works on Ubuntu also work on elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Apache and PHP in a virtual server using Vagrant, and that setup works well for me. You should be able to run these applications directly on elementary, if you'd prefer.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-02-02T15:25:22.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10507" PostTypeId="2" ParentId="245" CreationDate="2017-02-02T15:34:04.950" Score="0" Body="&lt;p&gt;As a complement/update &lt;strong&gt;for Loki&lt;/strong&gt; to the other answer which redirects to sites like &quot;Apps for Elementary&quot; I want to keep an update on this, gradually adding here some info on the apps that I test.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are these reviews on some of the apps on Youtube: &lt;a href=&quot;https://www.youtube.com/playlist?list=PLyYtzGEu4xnGRga7Rvj76h4UuNinUP4j0&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary 3rd Party Apps Reviews&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But that review, as well as the linked addresses seem to be from the Freya period.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Loki some of the apps are now default, like &lt;strong&gt;Calculator&lt;/strong&gt;, or are very commonly used, like &lt;strong&gt;Tweaks&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/Webby/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Webby&lt;/strong&gt;&lt;/a&gt;, the web app browser, has a ppa that doesn't work in Loki.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/Translator/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Translator&lt;/strong&gt;&lt;/a&gt; is meant for translating text between seven languages, works in Loki. Also includes a dictionary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wFZCu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wFZCu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The translation engine it Yandex, not as good as Google Translate, at least for now.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://quassy.github.io/elementary-apps/Hourglass/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Hourglass&lt;/strong&gt;&lt;/a&gt; works fine; it includes alarm, timer and stopwatch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hCbzk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hCbzk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-04T20:16:26.793" LastActivityDate="2017-02-04T20:16:26.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10508" PostTypeId="2" ParentId="10504" CreationDate="2017-02-02T16:41:32.320" Score="1" Body="&lt;p&gt;Actually this is only a warning about a file that has been renamed:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;you should either delete (move, backup) if you do not want its contents to be interpreted by &lt;code&gt;apt&lt;/code&gt; or&lt;/li&gt;&#xA;&lt;li&gt;rename it (without &lt;code&gt;.ucf-dist&lt;/code&gt; in the filename) so that its contents is interpreted by &lt;code&gt;apt&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-02T16:41:32.320" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10509" PostTypeId="2" ParentId="10444" CreationDate="2017-02-02T20:06:00.133" Score="1" Body="&lt;p&gt;I don't think this is a problem on your end.  I have the same issue and i am sure they are working on this and hopefully an update will hit soon to fix.  Apps should still download and install with no problem.  You may want to read the description carefully as there are no icons to know exactly what you are downloading.&#xA;Hope this helps. &lt;/p&gt;&#xA;" OwnerUserId="8393" LastActivityDate="2017-02-02T20:06:00.133" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10510" PostTypeId="1" CreationDate="2017-02-02T21:17:57.137" Score="0" ViewCount="176" Body="&lt;p&gt;Just installed Loki and Shutter app. I know that in Loki the old systray integration does not work anymore but is there a workaround...?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="2831" LastActivityDate="2017-02-03T05:47:26.993" Title="How to enable Shutter systray icon in wingpanel?" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10511" PostTypeId="1" AcceptedAnswerId="10532" CreationDate="2017-02-02T21:33:29.007" Score="0" ViewCount="172" Body="&lt;p&gt;I am trying to find a workaround for the following problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use a Radeon HD 6000 series pci express graphics card with a HDMI output to a tv.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After waking from suspend, no sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Opening Pavucontrol tells me the HDMI port is unplugged. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I have left the sound pane of System Settings open, I can see the HDMI port under 'Play sound through' has disappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restarting the system or or re-launching System Settings solves the issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So: what is the sequence of events when System Settings opens, and can I automate this on-wake to restore HDMI sound automatically?&lt;/p&gt;&#xA;" OwnerUserId="8234" LastEditorUserId="8234" LastEditDate="2017-02-02T21:40:31.157" LastActivityDate="2017-02-04T22:07:51.640" Title="Why are on-wake sound issues solved by opening System Settings?" Tags="|release-loki|settings|sound|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10512" PostTypeId="1" CreationDate="2017-02-02T22:02:26.897" Score="2" ViewCount="146" Body="&lt;p&gt;Is there any resources/documentation on which database can be use to save application input data. I am trying to build an invoicing application for elementary OS Loki.&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2017-02-03T01:40:30.917" Title="elementary OS application development databases?" Tags="|applications|development|design|metadata|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10513" PostTypeId="1" CreationDate="2017-02-03T00:10:05.413" Score="0" ViewCount="220" Body="&lt;p&gt;I can't update just simple grow the file quantity (file size) higher and higher. What is the problem? &quot;Waiting for package manager lock&quot; This is the message.&#xA;1.7 GB the size and it's keep rising.&lt;/p&gt;&#xA;" OwnerUserId="7408" LastEditorUserId="7408" LastEditDate="2017-02-03T00:17:34.627" LastActivityDate="2017-02-04T19:45:19.423" Title="Something wrong with the AppCenter updates" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10514" PostTypeId="2" ParentId="10512" CreationDate="2017-02-03T01:40:30.917" Score="7" Body="&lt;p&gt;Check out the &lt;a href=&quot;https://developer.elementary.io&quot;&gt;developer&lt;/a&gt; section of elementary's website. They offer advice on many components you can use to build elementary-style applications. Specifically, they recommend GDA for managing databases, which has documentation available on &lt;a href=&quot;http://valadoc.org/libgda-5.0/Gda&quot;&gt;Valadoc&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8214" LastActivityDate="2017-02-03T01:40:30.917" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10515" PostTypeId="2" ParentId="10510" CreationDate="2017-02-03T05:33:12.973" Score="2" Body="&lt;p&gt;Just re-read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4226/how-can-i-get-applications-to-display-a-system-tray-icon&quot;&gt;How can I get applications to display a system tray icon?&lt;/a&gt; and realized my question was invalid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shutter already implements &lt;em&gt;&quot;Quicklists&quot;&lt;/em&gt; or &lt;em&gt;&quot;Jumplists&quot;&lt;/em&gt; which is what I wanted. The only missing piece was the accessibility across workspaces and I resolved it thanks to the &quot;Toggle on all workspaces&quot; shortcut mentionned here: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4607/2831&quot;&gt;https://elementaryos.stackexchange.com/a/4607/2831&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All in all I did not want what I asked but just being able to execute Shutter actions from all workspaces...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for the noise :)&lt;/p&gt;&#xA;" OwnerUserId="2831" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-03T05:47:26.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10516" PostTypeId="1" CreationDate="2017-02-03T10:31:24.233" Score="0" ViewCount="1556" Body="&lt;p&gt;I can't watch any videos on southpark.cc.com or facebook, I tried to install flash player like in opera's tutorial but i don't have a folder called plugins in opera's main folder. I installed it from commands and so on and when I wanted to go on &quot;opera://plugins&quot; there is no plugin, I have only the reader plugin. &lt;/p&gt;&#xA;" OwnerUserId="8086" LastEditorUserId="578" LastEditDate="2017-02-04T10:21:13.387" LastActivityDate="2017-02-04T10:21:13.387" Title="How to install Flash player on Opera?" Tags="|thirdpartyapps|video-player|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10517" PostTypeId="2" ParentId="10516" CreationDate="2017-02-03T10:46:35.893" Score="1" Body="&lt;p&gt;I found the answer: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/10/pepper-flash-chromium-opera-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2016/10/pepper-flash-chromium-opera-ubuntu/&lt;/a&gt; &#xA;I am sorry that i posted the question.&lt;/p&gt;&#xA;" OwnerUserId="8086" LastActivityDate="2017-02-03T10:46:35.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10518" PostTypeId="2" ParentId="7776" CreationDate="2017-02-03T10:53:26.747" Score="1" Body="&lt;p&gt;After having temporarily solved following your suggestion, that is stopping the ibus-daemon service, I have tried to reset it's configuration (&lt;code&gt;ibus -reset-config&lt;/code&gt;), and now the problem is disappeared, also after having rebooted, with the ibus daemon active.&lt;/p&gt;&#xA;" OwnerUserId="8432" LastEditorUserId="26" LastEditDate="2017-02-09T17:49:15.937" LastActivityDate="2017-02-09T17:49:15.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10519" PostTypeId="2" ParentId="10516" CreationDate="2017-02-03T11:16:28.823" Score="0" Body="&lt;p&gt;Adobe's Flash will be installed if you install the ubuntu-restricted-extras.&#xA;You will not see any Flash plugin installed on Opera's plugin section.  I actually wanted to disable flash plugin.. but found that out. I use opera as well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-02-03T11:16:28.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10520" PostTypeId="1" CreationDate="2017-02-03T13:19:35.450" Score="2" ViewCount="253" Body="&lt;p&gt;My wi-fi stopped working. I used to have this problem from time to time and &lt;code&gt;service network-manager restart&lt;/code&gt; was always enough to fix it, but after system update the wi-fi doesn't work at all even after reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The network manager doesn't see any posible wi-fi connections.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried this to repair it: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4183/how-can-i-fix-networking-wi-fi-and-ethernet-not-being-available-after-update?newreg=1fc8b0f58f994b369fe64a9666105133&quot;&gt;How can I fix Networking, Wi-Fi and Ethernet, not being available after update?&lt;/a&gt; but it didn't help. I assume it is similar problem, but the solution is for older versions.&#xA;Can you pleas help me to repair my wi-fi again? The internet connection via ethernet works fine.&lt;/p&gt;&#xA;" OwnerUserId="8434" LastEditorUserId="16827" LastEditDate="2019-01-08T19:03:46.747" LastActivityDate="2019-05-05T17:53:25.460" Title="Wi-Fi doesnt work after update" Tags="|updates|wifi|networking|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10521" PostTypeId="2" ParentId="10186" CreationDate="2017-02-03T16:17:30.547" Score="2" Body="&lt;p&gt;This largely works for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr --output eDP1 --scale 1x1 --pos 3840x0 ; xrandr --output HDMI1 --scale 2x2 --mode 1920x1080 --fb 7680x2160 --pos 0x0&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only downside is the topbar seems to get in the way on my laptop screen. Obviously you'll need to adjust if you don't have same resolution as I do. Afraid there is no GUI solution yet. I just popped this command into a file so I can quickly switch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE&#xA;Pantheon keeps crashing out on me now, when changing res!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE 2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems to be more successful when you plug in monitor after fully loading up and logging in.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="8203" LastEditDate="2017-02-06T10:03:55.003" LastActivityDate="2017-02-06T10:03:55.003" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10522" PostTypeId="1" CreationDate="2017-02-03T16:58:34.417" Score="0" ViewCount="98" Body="&lt;p&gt;and thanks in advance for any assistance you may be able to provide in this matter.&#xA;Win8 crashed and I was unable to recover/restore it.  So I opted to upgrade to a better OS.  I have some previous experience with earlier versions of Linux distros, such as Mint and Slackware (I started using Slack 9, back in the day).  However, seeing that much advancement has been made in GUIs, and ease of install (not to mention package management), I thought I'd give elementary OS a try.  My wife and I share a laptop, so I had to have the &quot;ease of use factor&quot; for her.  And while I do like elementary OS very much, I miss some of the control I had with Slackware.  So I added a hard disk, and installed VectorLinux on it.  So here is: sda=elementary, sdb=Vector.  However, plymouth on elementary doesn't seem to play nice with the addition of Vector. Long-story short: I tinkered with various settings and now I have a blank black screen at boot until the login screen appears for elementary OS.  I am able to login and use elementary, but at this point Vector is an unreachable, unusable, colossal waste of money, time and space.  At the very least, I would like to get the elementary &quot;e&quot; pulsing again as the OS loads.  (As a former Slackware user, my experience has been with LiLo, not grub or plymouth, so please be gentle with  your answers.)  Any ideas as to how to fix this? Certainly it must be as easy as editing a .conf file somewhere, right?&lt;/p&gt;&#xA;" OwnerUserId="8435" LastActivityDate="2017-02-07T02:06:11.937" Title="Dual boot elementary OS and Vector Linux" Tags="|release-freya|dual-boot|plymouth|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10523" PostTypeId="2" ParentId="9047" CreationDate="2017-02-04T00:12:14.243" Score="1" Body="&lt;p&gt;Grub Customizer may be the answer:it let's you to show the menu, and configure the number of seconds until launching your default option: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CAJaT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CAJaT.png&quot; alt=&quot;General settings - grub customizer&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5910" LastActivityDate="2017-02-04T00:12:14.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10524" PostTypeId="2" ParentId="10438" CreationDate="2017-02-04T03:53:27.580" Score="1" Body="&lt;p&gt;Try manualy updating elementary os. Open a terminal with Super + T, then...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it says anything about package locks, follow the steps that it provides. You may have to preform some action, such as running a specific command. Otherwise you can continue by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Dont worry, this will not upgrade your os to ubuntu 16.10 ;)&lt;/p&gt;&#xA;" OwnerUserId="7983" LastActivityDate="2017-02-04T03:53:27.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10525" PostTypeId="2" ParentId="10464" CreationDate="2017-02-04T08:30:29.093" Score="1" Body="&lt;p&gt;Cheese and &quot;camera&quot; seems to work all of a sudden.  I would suspect it was from a linux kernel update or Elementary that I think happened.  If this happens to you, either run it as sudo or wait until another update comes.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-02-04T08:30:29.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10526" PostTypeId="1" CreationDate="2017-02-04T09:41:32.913" Score="2" ViewCount="567" Body="&lt;p&gt;i have installed elementary os loki on a lenovo 510s (intel kaby lake)&#xA;4.4.0-62-generic #83-Ubuntu SMP Wed Jan 18 14:10:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when the computer wakes up after putting it to sleep, it asks for my user password but then only the wallpaper shows up, nothing else.&#xA;anyone experiencing the same?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks!&#xA;best regards.&lt;/p&gt;&#xA;" OwnerUserId="8440" LastActivityDate="2024-04-02T01:04:40.547" Title="Desktop not loading when waking up after suspend" Tags="|release-loki|suspend|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10527" PostTypeId="1" CreationDate="2017-02-04T11:12:44.763" Score="0" ViewCount="38" Body="&lt;p&gt;How do I disable the crypto set up password when I switch my laptop, it is not the login password but the one when you power on your pc. please help&#xA;I am using os loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="8442" LastActivityDate="2017-04-05T14:41:35.050" Title="I want to disable the crypto password when I switch on my laptop" Tags="|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10528" PostTypeId="2" ParentId="10522" CreationDate="2017-02-04T11:19:00.363" Score="1" Body="&lt;p&gt;I think the problem is that the grub config is messed up. To solve it, do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo pantheon-text-editor /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The file should have a part like this, make sure the options are the same and that everything else on the file is commented out ( # in the beginning of the line).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;#GRUB_HIDDEN_TIMEOUT=&#xA;#GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;#GRUB_TIMEOUT=5&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then save the file and run &lt;code&gt;sudo update-grub&lt;/code&gt;. Check the output, it should say something about every system you have installed (if you don't see anything regarding Vector Linux, there's another problem..).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I've set grub to always show at boot and wait until you select one option. If you want to boot any option automatically, uncomment &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; and set it to any number greater than 0. E.g: &lt;code&gt;GRUB_TIMEOUT=5&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-04T11:19:00.363" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10529" PostTypeId="1" AcceptedAnswerId="10694" CreationDate="2017-02-04T12:43:15.367" Score="5" ViewCount="579" Body="&lt;p&gt;After the update yesterday (2/3), epiphany 3.8.10 and some OS updates, using Shift and CTRL require double tapping. For example, if I'm doing CTRL-C I have to type C twice. If I want to make a capital letter I have to type the letter twice as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This appears to only affect epiphany. So CTRL-C to copy from the browser into other apps doesn't work without tapping the C key twice - same with CTRL-V or X. From Chrome to other apps or within Chrome, no problem. This most likely has something to do with the update to 3.8.10 from 3.8.5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone been affected by this? Whats the solution?&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-06T12:06:53.487" LastActivityDate="2017-03-01T12:03:34.583" Title="CTRL-whatever and Shift-whatever require double tap" Tags="|updates|keyboard|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="10530" PostTypeId="2" ParentId="10527" CreationDate="2017-02-04T13:52:13.743" Score="2" Body="&lt;p&gt;It requires some effort to do it. A description of how to do it for Ubuntu can be found &lt;a href=&quot;https://askubuntu.com/questions/245112/can-i-disable-full-disk-encryption&quot;&gt;here&lt;/a&gt;. I think the steps are identical to elementary OS. The fastest way is most likely to backup your files and reinstall.&lt;/p&gt;&#xA;" OwnerUserId="342" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-04T13:52:13.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10531" PostTypeId="1" CreationDate="2017-02-04T14:22:38.290" Score="1" ViewCount="576" Body="&lt;p&gt;I use Elementary OS. How can I secure it? I am not a advanced linux user, but in the past 8 months I have gotten comfortable with using terminal.&lt;/p&gt;&#xA;" OwnerUserId="8445" LastActivityDate="2017-02-04T14:22:38.290" Title="How to harden elementary OS" Tags="|security|" AnswerCount="0" CommentCount="1" ClosedDate="2017-02-19T20:38:35.367" ContentLicense="CC BY-SA 3.0" />
  <row Id="10532" PostTypeId="2" ParentId="10511" CreationDate="2017-02-04T15:59:53.713" Score="1" Body="&lt;p&gt;It seems this is a problem introduced by Pulseaudio 8.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pulseaudio 9 claims to fix the problem (See &quot;Automatic routing improvements&quot;, &lt;a href=&quot;https://www.freedesktop.org/wiki/Software/PulseAudio/Notes/9.0/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pulseaudio 9 Release notes&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upgrading to Pulseaudio 9 doesn't seem possible in Loki or is beyond my techincal level. (EDIT: &lt;a href=&quot;https://askubuntu.com/a/872267&quot;&gt;here&lt;/a&gt; is someone trying it in Ubuntu 16.04 and running into unmet dependencies, as I did...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even tried &lt;a href=&quot;http://www.hecticgeek.com/2012/01/how-to-remove-pulseaudio-use-alsa-ubuntu-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;removing Pulseaudio entirely and falling back on Gnome-Alsa-Mixer&lt;/a&gt; or QASmixer. Neither recognised my HDMI output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;An answer&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While it doesn't directly answer my question, &lt;a href=&quot;https://askubuntu.com/a/840679&quot;&gt;this suggestion on AskUbuntu&lt;/a&gt; provided me with a quick'n'dirty solution to the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It might only have been a minor annoyance, but now I can switch my TV between games console and HTPC without having to jigger with the HTPC sound settings every time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I look forward to Juno on the assumption it will use a more recent version of Pulseaudio.&lt;/p&gt;&#xA;" OwnerUserId="8234" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-04T22:07:51.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10534" PostTypeId="1" CreationDate="2017-02-04T18:52:29.630" Score="1" ViewCount="783" Body="&lt;p&gt;This happens after my laptop goes automatically or manually in sleep mode and then when I wake it up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2zhqZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2zhqZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems a graphics problem? I`m running nvidoa 840m on my HP Pavilion 15.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway to resolve this?&lt;/p&gt;&#xA;" OwnerUserId="8451" LastActivityDate="2017-02-04T18:52:29.630" Title="Issue after waking from sleep mode" Tags="|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10535" PostTypeId="2" ParentId="10513" CreationDate="2017-02-04T19:45:19.423" Score="1" Body="&lt;p&gt;Reboot, open a terminal and execute this: &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&lt;/code&gt; . It seems that you didn't update your system for a long time so you have lots of files to download... &lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-04T19:45:19.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10536" PostTypeId="1" CreationDate="2017-02-04T19:50:53.637" Score="1" ViewCount="205" Body="&lt;p&gt;I install updates every day and since 1st of Feb. I have booting issues with my Elementary OS 0.4 Loki (64-bit) (U 16.04 LTS) but not every time though. I turn on my PC. sda5 screen shows up, I enter the password and all I get is either a blank black screen or pulsing logo of elementary OS. After few tries it loads the login screen to my account. I don't have a clue what is the problem... maybe twice the sda5 screen showed me something with &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;C&lt;/kbd&gt; I guess? But I am not quite sure, cause it flashes so quickly.&lt;br&gt;&#xA;Any suggestions how to solve this without reinstalling the whole PC and possibly losing all of my settings, installs etc.? (Btw, I am using new SSD)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my English... I am European :D&lt;/p&gt;&#xA;" OwnerUserId="8453" LastEditorUserId="16827" LastEditDate="2019-01-08T18:12:20.700" LastActivityDate="2019-01-08T18:12:20.700" Title="Booting problem" Tags="|boot|ssd|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10537" PostTypeId="1" AcceptedAnswerId="10574" CreationDate="2017-02-04T20:01:59.943" Score="0" ViewCount="568" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/Keruspe/GPaste&quot; rel=&quot;nofollow noreferrer&quot;&gt;GPaste&lt;/a&gt; is quite a sexy pasteboard manager:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GfC3Y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GfC3Y.png&quot; alt=&quot;gpaste&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's the preferred way to install this on Elementary? I've seen some old Ubuntu ppa's for it, but nothing up-to-date.  Any solutions that have worked for you?&lt;/p&gt;&#xA;" OwnerUserId="3600" LastActivityDate="2017-02-06T01:08:59.560" Title="How to install GPaste?" Tags="|software-installation|package-management|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10538" PostTypeId="2" ParentId="4192" CreationDate="2017-02-04T20:15:03.910" Score="0" Body="&lt;p&gt;you can do that in &lt;a href=&quot;http://www.sublimetext.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;sublime text&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;file -&amp;gt; reopen with encoding -&amp;gt; {current_encoding}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;file -&amp;gt; save with encoding -&amp;gt; {new_encoding}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8454" LastActivityDate="2017-02-04T20:15:03.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10539" PostTypeId="1" CreationDate="2017-02-04T22:13:11.457" Score="0" ViewCount="459" Body="&lt;p&gt;On booting up,I get a message to select proper boot device and reboot. I tried changing bios settings but nothing works.&lt;/p&gt;&#xA;" OwnerUserId="8458" LastEditorUserId="578" LastEditDate="2017-02-05T07:22:12.110" LastActivityDate="2017-11-02T11:11:21.130" Title="After installing Elementary os. computer won't boot" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10540" PostTypeId="2" ParentId="10526" CreationDate="2017-02-04T23:47:03.310" Score="0" Body="&lt;p&gt;Have you tried to login with the guest account? If that works fine then it might be some app you have at start up. It happened to me with f.lux. Check that.&lt;/p&gt;&#xA;" OwnerUserId="5910" LastActivityDate="2017-02-04T23:47:03.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10541" PostTypeId="1" CreationDate="2017-02-05T00:45:28.363" Score="1" ViewCount="2957" Body="&lt;p&gt;I'm a little new in Linux operative systems and I've been trying to make my laptop Vaio vpcee23el with Elementary OS (Loki) dim its backlight. I could found a way to make it in this question &lt;a href=&quot;https://askubuntu.com/questions/476664/cannot-change-backlight-brightness-ubuntu-14-04&quot;&gt;Intel graphics change brightness&lt;/a&gt; using the @Phoenix answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He explained that should add&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c &quot;echo x &amp;gt; /sys/class/backlight/intel_backlight/brightness&quot;&#xA;sudo sh -c &quot;echo y &amp;gt; /sys/class/backlight/acpi_video0/brightness&quot; # (optional)&#xA;sudo sh -c &quot;echo y &amp;gt; /sys/class/backlight/acpi_video1/brightness&quot; # (optional)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;where 0 &amp;lt;= x &amp;lt;= 4882 and 0 &amp;lt;= y &amp;lt;= 10.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;in /etc/rc.local file. When I tryed it, it worked, in fact, it worked even just using &lt;code&gt;sudo sh -c &quot;echo x &amp;gt; /sys/class/backlight/intel_backlight/brightness&quot;&lt;/code&gt; directly in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I would like to know if there is any way to make this work along the fn key so I don't have to type it on terminal every time i want to change my laptop brightness.&#xA;s&lt;/p&gt;&#xA;" OwnerUserId="8459" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-12-26T11:07:30.213" Title="Making brightness work on Elementary OS Loki with fn key" Tags="|display|keyboard-shortcuts|laptop|brightness|vaio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10542" PostTypeId="1" CreationDate="2017-02-05T02:19:57.613" Score="1" ViewCount="65" Body="&lt;p&gt;It happens when I try to reply the mail with fcitx input method, it doesn't happens with gcin input method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My bug report: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-mail/+bug/1661909&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-mail/+bug/1661909&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="703" LastEditorUserId="703" LastEditDate="2017-02-05T05:49:31.163" LastActivityDate="2017-02-05T05:49:31.163" Title="Pantheon-mail freezes or crashes when using fcitx input method to reply a mail" Tags="|pantheon-mail|fcitx|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-19T20:43:11.413" ContentLicense="CC BY-SA 3.0" />
  <row Id="10544" PostTypeId="2" ParentId="10541" CreationDate="2017-02-05T06:54:40.730" Score="4" Body="&lt;p&gt;I found this: &lt;a href=&quot;https://askubuntu.com/questions/594068/fnf5-f6-keys-to-adjust-brightness-doesnt-work&quot;&gt;answer&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and this worked for me from his answer: &lt;a href=&quot;https://i.stack.imgur.com/8DYYc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8DYYc.png&quot; alt=&quot;solved the problem&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S: I have asus too, but I got X550JX model.&lt;/p&gt;&#xA;" OwnerUserId="8086" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-05T06:54:40.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10545" PostTypeId="2" ParentId="10539" CreationDate="2017-02-05T07:23:34.110" Score="1" Body="&lt;p&gt;Actually there is no operating system / boot loader on your system. You will have to reinstall or repair elementary OS as there is something that went wrong.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-05T07:23:34.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10547" PostTypeId="1" CreationDate="2017-02-05T07:54:26.817" Score="2" ViewCount="4960" Body="&lt;p&gt;Hi I am a new Linux user and I installed Ubuntu but now I am liking elementary OS more so how can I shift without loosing my data(song videos and stuff in home folder)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS - I am a complete noobie in Linux so if you could give detailed steps that would be great.&lt;/p&gt;&#xA;" OwnerUserId="8462" LastEditorUserId="578" LastEditDate="2017-02-08T12:36:46.787" LastActivityDate="2017-03-10T17:17:46.340" Title="Change from Ubuntu to elementary os" Tags="|system-installation|ubuntu|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10550" PostTypeId="2" ParentId="10547" CreationDate="2017-02-05T09:02:35.150" Score="3" Body="&lt;p&gt;Basically you should separate your &lt;code&gt;/home&lt;/code&gt;and &lt;code&gt;/&lt;/code&gt; partitions on your existing system. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot the elementary OS live DVD/USB system you want to install&lt;/li&gt;&#xA;&lt;li&gt;With &lt;code&gt;gparted&lt;/code&gt; you should shrink your existing root partition and create a new partition (10-12 GB should suffice)&lt;/li&gt;&#xA;&lt;li&gt;You can install elementary OS to the new partition&lt;/li&gt;&#xA;&lt;li&gt;You can mount the old partiton as &lt;code&gt;/home&lt;/code&gt; while installing the new system&lt;/li&gt;&#xA;&lt;li&gt;After your newly installed system is working, you can gain some space by removing the old system from your &lt;code&gt;/home&lt;/code&gt; partition&lt;/li&gt;&#xA;&lt;li&gt;You might as well restructure it so that your documents appear in your new &lt;code&gt;/home&lt;/code&gt; folder (you will find them in &lt;code&gt;/home/home/username&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-05T09:02:35.150" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10551" PostTypeId="2" ParentId="9075" CreationDate="2017-02-05T09:11:09.320" Score="2" Body="&lt;p&gt;This is my first time answering something on stack exchange. &#xA;I found your post while trying to figure out the same problem. &#xA;Finally found the answer on this site &lt;a href=&quot;http://www.devdungeon.com/content/desktop-notifications-python-libnotify&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.devdungeon.com/content/desktop-notifications-python-libnotify&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realize you are using subprocess but i also tried it and had the same problem. The code below may need some tweaking for subprocess to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I initially thought that i had to somehow set the image using Gtk.Image, several googles seems to lead to that, and it came down to setting the pixbuf and then setting the icon from there. This is my first time doing a script in Python and Gtk. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, the answer from the site is below. &#xA;I followed exactly the same and managed to show my png file in the notification. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# This time import the GdkPixbuf module&#xA;from gi.repository import Notify, GdkPixbuf&#xA;&#xA;Notify.init(&quot;Test App&quot;)&#xA;notification = Notify.Notification.new(&quot;Alert!&quot;)&#xA;&#xA;# Use GdkPixbuf to create the proper image type&#xA;image = GdkPixbuf.Pixbuf.new_from_file(&quot;/home/NanoDano/test.png&quot;)&#xA;&#xA;# Use the GdkPixbuf image&#xA;notification.set_icon_from_pixbuf(image)&#xA;notification.set_image_from_pixbuf(image)&#xA;&#xA;notification.show()&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8465" LastEditorUserId="8465" LastEditDate="2017-02-05T09:18:02.140" LastActivityDate="2017-02-05T09:18:02.140" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10552" PostTypeId="2" ParentId="7528" CreationDate="2017-02-05T09:28:11.120" Score="0" Body="&lt;p&gt;There is a typo in your command. This is the correct one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;First of all execute it in any terminal app and then try to change the brightness pressing F1/F2 keys. Add this line to your rc.local only if it works.&lt;/p&gt;&#xA;" OwnerUserId="8099" LastActivityDate="2017-02-05T09:28:11.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10553" PostTypeId="2" ParentId="9897" CreationDate="2017-02-05T10:46:08.513" Score="1" Body="&lt;p&gt;Touchegg does not work in Loki.  However, I also posted a question that was not voted on or answered..   One needs to use Libinput gestures..  you can follow the link below and if you do everything right you can get workspaces to work out of the box.  anything else is my question.. how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10432/multi-touch-gestures-for-eos-config-file-for-libinput-os&quot;&gt;Multi-Touch Gestures for eOS config file for Libinput OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-05T10:46:08.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10555" PostTypeId="1" AcceptedAnswerId="10558" CreationDate="2017-02-05T13:05:07.147" Score="3" ViewCount="1149" Body="&lt;p&gt;Pantheon is playing games with me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a while, it has been starting at the Downloads Directory, which is what  I want. I have opened a new directory, and I think closed it while in it. &#xA;So now it keeps opening on that pointless directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to specify the default initial directory?!&lt;/p&gt;&#xA;" OwnerUserId="5067" LastEditorUserId="578" LastEditDate="2017-02-05T14:36:09.243" LastActivityDate="2017-02-06T07:57:56.083" Title="How to choose the default directory Pantheon-files starts in" Tags="|pantheon-files|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10556" PostTypeId="1" CreationDate="2017-02-05T14:16:46.977" Score="1" ViewCount="96" Body="&lt;p&gt;I have a 4k/uhd display and have set gnome scaling factor to 2 for my username and also the lightdm user so that greeter login screen also is &quot;hidpi&quot; enabled. I have greeter background set to a default wallpaper and my user account (gala) wallpaper is solid colour.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I login and the transition from greeter to gala there is a brief flash where the wallpaper is tiled 2x2 (4x) like a grid, it briefly flashes that before switching to solid background and loading desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was trying to look through the greeter and gala code but couldn't figure out where this issue might be occurring (or if it's a Xorg config issue)... any ideas?&lt;/p&gt;&#xA;" OwnerUserId="4977" LastEditorUserId="4977" LastEditDate="2017-02-10T04:14:35.503" LastActivityDate="2017-02-10T04:19:50.380" Title="Glitch in wallpaper during transition from greeter to gala during login to desktop with HiDPI" Tags="|greeter|gala|wallpaper|hidpi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10557" PostTypeId="1" CreationDate="2017-02-05T14:34:18.530" Score="0" ViewCount="1430" Body="&lt;p&gt;I use gigabyte P34G v2. The graphics card is nvidia GTX860m. The OS I use is elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo ubuntu-drivers list ---&amp;gt; check    &#xA;$ sudo apt install intel-microcode    &#xA;$ sudo apt install nvidia-367&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Driver installation is not available. I have nothing to look at nvidia-settings. And I am using Secure Boot.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;com@com:~$ nvidia-settings&#xA;&#xA;** Message: PRIME: No offloading required. Abort&#xA;&#xA;** Message: PRIME: is it supported? no&#xA;&#xA;ERROR: nvidia-settings could not find the registry key file. This file&#xA;should have been installed along with this driver at&#xA;/usr/share/nvidia/nvidia-application-profiles-key-documentation. The&#xA;application profiles will continue to work, but values cannot be&#xA;prepopulated or validated, and will not be listed in the help text.&#xA;Please see the README for possible values and descriptions.&#xA;&#xA;com@com:~$&#xA;&#xA;com@com:~$ cd /usr/share/nvidia/&#xA;&#xA;com@com:/usr/share/nvidia$ ls -a&#xA;&#xA;.  ..&#xA;com@com:/usr/share/nvidia$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I went to &quot;/usr/share/nvidia/&quot; and found nothing. How can I use the GTX860m?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;have a nice day!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Fundamentally, there was a problem with my motherboard BIOS. I can not shut down after booting to the installation media of any Linux distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because of this, I spent a lot of time. The solution was to re-update the existing BIOS. Since there is no problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The nvidia driver should not use secure boot. I did not read the English message. I have been able to continue to enable Secure Boot. So I installed it but it did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently using it on Ubuntu 16.04.2. Of course before that elementary OS Loki is also good.&lt;/p&gt;&#xA;" OwnerUserId="8470" LastEditorUserId="16827" LastEditDate="2019-12-08T04:02:52.647" LastActivityDate="2019-12-08T04:02:52.647" Title="This is the nvidia driver installation question on elementary OS Loki" Tags="|release-loki|drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10558" PostTypeId="2" ParentId="10555" CreationDate="2017-02-05T15:00:29.077" Score="2" Body="&lt;p&gt;Pantheon-files saves by default the places that were opened (tabs and directories). You can however change these settings with &lt;code&gt;dconf-editor&lt;/code&gt; under the schema &lt;code&gt;org.pantheon.files.preferences&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;restore-tabs&lt;/code&gt; if you set this to &lt;code&gt;false&lt;/code&gt; it does not remember the last places opened&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;tab-info-list&lt;/code&gt; contains the saved list of tabs and directories  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So you can either turn off the behaviour with the first setting or change the directory/directories with the second one.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-05T15:00:29.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10559" PostTypeId="2" ParentId="9794" CreationDate="2017-02-05T15:07:26.643" Score="-1" Body="&lt;p&gt;Feel free to visit &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6840/how-to-replace-wingpanels-applications-text-with-a-icon-in-freya&quot;&gt;this&lt;/a&gt; link for the first part of your question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest possible way of changing the date and time format is to type these two commands in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set com.canonical.indicator.datetime time-format &quot;custom&quot;&#xA;gsettings set com.canonical.indicator.datetime custom-time-format &quot;%A, %d %B %Y, %I:%M&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%A - The full weekday name according to the current locale.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%d - The day of the month as a decimal number (range 01 to 31).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%B - The full month name according to the current locale.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%Y - The year as a decimal number including the century.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%I - The hour (12-hour clock) as a decimal number (range 1 to 12); single digits are preceded by a blank. (See also %I.) (TZ)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;%M - The minute as a decimal number (range 00 to 59).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In your case, to display time only, you will probable need only %I and %M&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure to check &lt;a href=&quot;https://linux.die.net/man/3/strftime&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; link for more detailed explanation of date and time symbols.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&#xA;Icon instead of text is not available for Loki anymore&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8472" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-05T15:17:32.660" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10560" PostTypeId="1" CreationDate="2017-02-05T16:34:57.553" Score="0" ViewCount="536" Body="&lt;p&gt;Hi My elementary OS was working just fine, I don't know what the kids have done, it am not able to login to my account..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have one personal account and one other is guest account.. Im trying to log into personal account but the click is not working, but when i click on guest account, the click is working and guest account says this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ba7T7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ba7T7.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and when i click Ok, it disappear and after that i cannot do anything, can't even restart or shutdown, its just empty everywhere..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but main question, why i am not able to click on personal account when im trying to login into personal account. why it does't click on it, nothing happens but works for guest account.&lt;/p&gt;&#xA;" OwnerUserId="8473" LastActivityDate="2017-02-05T18:13:06.640" Title="Can't click login into admin account" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10561" PostTypeId="1" CreationDate="2017-02-05T17:04:09.750" Score="1" ViewCount="64" Body="&lt;p&gt;I noticed this strange behavior when I'm typing into text forms in the Epiphany browser (version 3.18.10 on eOS Loki):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when I have to perform combinations of keys (e.g. uppercase letters, special symbols, copy and paste commands) I have to press the key &lt;em&gt;twice&lt;/em&gt; before I get the actual character or command done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not occur in any other application I tried so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hint? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="7938" LastActivityDate="2017-02-05T17:04:09.750" Title="Keyboard behavior in Epiphany forms (Web version 3.18.10)" Tags="|keyboard|epiphany|" AnswerCount="0" CommentCount="1" ClosedDate="2017-02-19T20:39:12.353" ContentLicense="CC BY-SA 3.0" />
  <row Id="10562" PostTypeId="1" CreationDate="2017-02-05T18:06:53.537" Score="0" ViewCount="201" Body="&lt;p&gt;1-st time here. The PC sees my phone and mounts it. &lt;a href=&quot;https://i.stack.imgur.com/wiuYH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wiuYH.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;I can copy to the internal memory of the phone, but I can't copy to the sdcard of the phone. It shows me the error of the picture I provided.&#xA;Distro: Loki, latest updates.&lt;/p&gt;&#xA;" OwnerUserId="8474" LastActivityDate="2018-01-02T15:58:58.283" Title="Loki, libmtp error when copying to Android device" Tags="|release-loki|android|mtp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10563" PostTypeId="2" ParentId="10560" CreationDate="2017-02-05T18:13:06.640" Score="2" Body="&lt;p&gt;Ctrl+Alt+F1 will lead u to terminal. Login to terminal with regular user and do: &quot;rm -rf ~/.config&quot; and reboot your PC. Keep in mind that u will lose your app settings.&lt;/p&gt;&#xA;" OwnerUserId="8474" LastActivityDate="2017-02-05T18:13:06.640" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10567" PostTypeId="1" CreationDate="2017-02-05T21:31:27.477" Score="1" ViewCount="180" Body="&lt;p&gt;I am trying to connect my bluetooth headphones to my computer running elementary os loki. Aside from some other connection problems its been going fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Except the bluetooth control in the wingpannel. For some reason, it is screwed up and shows multiple instances of the same device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2yYT4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2yYT4.png&quot; alt=&quot;Why? There are too many for me! I don&amp;#39;t even have this many devices with bluetooth!&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To also note: This problem gets worse every time I reconnect my headphones. And The switchboard plugs for sound and bluetooth both say there is only one device. This is a problem with the wingpannel indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a bug that I need to report? Or is there some magical command to fix this?&lt;/p&gt;&#xA;" OwnerUserId="7983" LastActivityDate="2017-02-05T21:31:27.477" Title="Bluetooth device duplicates (wingpannel)" Tags="|settings|wingpanel|sound|bluetooth|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10568" PostTypeId="1" AcceptedAnswerId="10571" CreationDate="2017-02-05T21:42:21.793" Score="1" ViewCount="303" Body="&lt;p&gt;I wanted to make steam icon visible on system tray, so I edited &lt;code&gt;/etc/wingpanel.d/ayatana.blacklist&lt;/code&gt; and I accidentally deleted all of the blacklist names instead of only steam. So the outcome is that now I have two wifi icons on the tray and I wanna get rid of the other one. Could you please tell me what were the original names there? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="8477" LastEditorUserId="578" LastEditDate="2017-02-05T23:05:23.837" LastActivityDate="2017-02-05T23:05:23.837" Title="What are the original settings for Ayatana blacklist in Loki? 2 wifi icons" Tags="|release-loki|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10571" PostTypeId="2" ParentId="10568" CreationDate="2017-02-05T23:04:11.180" Score="0" Body="&lt;p&gt;This file is in the &lt;code&gt;elementary-default-settings&lt;/code&gt; package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg -S /etc/wingpanel.d/ayatana.blacklist &#xA;elementary-default-settings: /etc/wingpanel.d/ayatana.blacklist&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can download it and extract its contents&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get --download-only --reinstall elementary-default-settings&#xA;$ dpkg --vextract /var/cache/apt/archives/elementary-default-settings*.deb /tmp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And now you check the contents of the file, overwrite the old one, etc. at &lt;code&gt;/tmp/etc/wingpanel.d/ayatana.blacklist&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-05T23:04:11.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10572" PostTypeId="2" ParentId="10460" CreationDate="2017-02-05T23:31:25.947" Score="1" Body="&lt;p&gt;Back up all the files on your SD card, and format it to something else. (ext3, ext4, ntfs, fat32, etc.) It is possible that the tv does not support the file system on your SD card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(IT IS A REQUIREMENT THAT YOU BACK UP &lt;strong&gt;EVERYTHING&lt;/strong&gt; ON YOUR SD CARD BEFORE FORMATING IT!!!! ALL DATA ON THE CARD WILL BE LOST!!!!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may have to install a program such as gnome-disks to format removable devices. (It should be available in the AppCenter)&lt;/p&gt;&#xA;" OwnerUserId="7983" LastActivityDate="2017-02-05T23:31:25.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10573" PostTypeId="2" ParentId="10437" CreationDate="2017-02-06T00:50:12.657" Score="1" Body="&lt;p&gt;It seems that the only way to remove disk encryption it to reinstall elementary os. Just make sure to back up all your files on an external drive before you do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry there is no other way :(&lt;/p&gt;&#xA;" OwnerUserId="7983" LastActivityDate="2017-02-06T00:50:12.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10574" PostTypeId="2" ParentId="10537" CreationDate="2017-02-06T01:00:47.937" Score="0" Body="&lt;p&gt;I installed gpaste by using the terminal command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gpaste&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I ran it using &lt;strong&gt;synapse&lt;/strong&gt; which is much better than the slingshot menu&#xA;It does not show up in the slingshot menu and...&#xA;You can execute it with the command line by typing the following&#xA;/usr/lib/gpaste/gpaste/gpaste-ui&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not so elegant.. but it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Glipper is better since it works on the panel&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-02-06T01:08:59.560" LastActivityDate="2017-02-06T01:08:59.560" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10575" PostTypeId="1" CreationDate="2017-02-06T07:00:45.280" Score="2" ViewCount="404" Body="&lt;p&gt;In Loki, How do I set a 'Hot Corner' for closing the current window?  I've solved this myself and wanted to post the answer so others will hopefully find this.  Also a better method is always welcome.&lt;/p&gt;&#xA;" OwnerUserId="8410" LastEditorUserId="578" LastEditDate="2017-02-06T09:39:39.817" LastActivityDate="2017-02-09T06:40:06.970" Title="Loki - Hot corner close window" Tags="|release-loki|pantheon|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10576" PostTypeId="2" ParentId="10575" CreationDate="2017-02-06T07:06:22.830" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install xdotool:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xdotool&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In 'Hot Corners' under 'Custom command' insert the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool keydown Alt F4 keyup Alt F4&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="8410" LastEditorUserId="8410" LastEditDate="2017-02-09T06:40:06.970" LastActivityDate="2017-02-09T06:40:06.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10577" PostTypeId="2" ParentId="10555" CreationDate="2017-02-06T07:57:56.083" Score="2" Body="&lt;p&gt;At the moment, the default directory (the one that is loaded when you restore tabs is off or if you close the last tab) is hard-coded to be the user home directory.  So if you want to return to the Downloads directory on re-opening then you have to make sure that that folder is open when you close Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try requesting a feature to be able set the default directory to something else at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-02-06T07:57:56.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10578" PostTypeId="1" CreationDate="2017-02-06T09:05:48.827" Score="0" ViewCount="248" Body="&lt;p&gt;After installing Loki I updated all from the app center. It took long time and log out automatically. When ever I logged on black screen appears. Restarted but nothing change the black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am new here installed this OS just couple of hour ago. Tell me how can I fix this&lt;/p&gt;&#xA;" OwnerUserId="8484" LastActivityDate="2018-05-13T11:02:04.393" Title="Black screen after log out" Tags="|release-freya|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10579" PostTypeId="2" ParentId="10562" CreationDate="2017-02-06T09:53:19.753" Score="1" Body="&lt;p&gt;This might only be a file system limitation on your android device / sdcard. Double-check its file system and the characters that it supports. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to test to copy files without any special characters (such as &lt;code&gt;: ; , '&lt;/code&gt; etc.)&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-06T09:53:19.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10581" PostTypeId="2" ParentId="10557" CreationDate="2017-02-06T14:27:32.873" Score="0" Body="&lt;p&gt;This will explain how to install nvidia drivers without any problems. I Havent had a problem with this &lt;a href=&quot;https://www.youtube.com/watch?v=YXgd2w2lr-U&amp;amp;t=95s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=YXgd2w2lr-U&amp;amp;t=95s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8487" LastActivityDate="2017-02-06T14:27:32.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10582" PostTypeId="1" CreationDate="2017-02-06T14:32:27.143" Score="0" ViewCount="209" Body="&lt;p&gt;The last thing I have installed was lazarus and now when I try to install anything with apt I get a error. Lazarus compiles just fine without any errors. Example.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install ffmpeg&#xA;[sudo] password for user:                 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; ffmpeg : Depends: libavdevice-ffmpeg56 (&amp;gt;= 7:2.6) but it is not going to be installed&#xA; fp-utils-3.0.0 : Depends: fpc-source-3.0.0 but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I run &lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo apt-get -f install&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  gir1.2-javascriptcoregtk-4.0 gir1.2-json-1.0 gir1.2-soup-2.4 gir1.2-webkit2-4.0&#xA;  libappstream3 libatkmm-1.6-1v5 libcairomm-1.0-1v5 libglibmm-2.4-1v5 libido3-0.1-0&#xA;  libpangomm-1.4-1v5 libsigc++-2.0-0v5 libvala-0.32-0 sbsigntool&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following additional packages will be installed:&#xA;  fpc-source-3.0.0&#xA;The following NEW packages will be installed:&#xA;  fpc-source-3.0.0&#xA;0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.&#xA;98 not fully installed or removed.&#xA;Need to get 0 B/15.7 MB of archives.&#xA;After this operation, 166 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;(Reading database ... 223502 files and directories currently installed.)&#xA;Preparing to unpack .../fpc-source-3.0.0_3.0.0+dfsg-2_all.deb ...&#xA;Unpacking fpc-source-3.0.0 (3.0.0+dfsg-2) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/fpc-source-3.0.0_3.0.0+dfsg-2_all.deb (--unpack):&#xA; trying to overwrite '/usr/share/fpcsrc/3.0.0/rtl/android/jvm/java_sys_android.inc', which is also in package fpc-src 3.0.0&#xA;dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/fpc-source-3.0.0_3.0.0+dfsg-2_all.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;[EDIT]: No matter what I use apt for I still get the same error. Even after trying to remove the package causing the issue.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo apt remove fpc-src&#xA;[sudo] password for user:                 &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; fp-utils-3.0.0 : Depends: fpc-source-3.0.0 but it is not going to be installed&#xA; lazarus-project : Depends: fpc-src (&amp;gt;= 3.0.0) but it is not going to be installed or&#xA;                            fpc-source (&amp;gt;= 3.0.0)&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8487" LastEditorUserId="8487" LastEditDate="2017-02-06T19:17:52.337" LastActivityDate="2017-02-06T19:34:49.483" Title="(apt-get) Pipe error" Tags="|package-management|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10583" PostTypeId="2" ParentId="10582" CreationDate="2017-02-06T14:40:29.590" Score="0" Body="&lt;p&gt;You will have to remove the &lt;code&gt;fpc-src&lt;/code&gt;package first (&lt;code&gt;sudo apt remove fpc-src&lt;/code&gt;), and run &lt;code&gt;apt-get install -f&lt;/code&gt; after (and reinstall the new packages eventually).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-06T14:40:29.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10584" PostTypeId="1" AcceptedAnswerId="10590" CreationDate="2017-02-06T15:42:37.567" Score="0" ViewCount="6530" Body="&lt;p&gt;Unfortunately i forgot my username or password for my account, how do i know what is my username??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can open the terminal at login screen, and then the terminal screen shows this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Loki asfi-inspiron-3521 tty1&#xA;asfi-inspiron-3521 login:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8473" LastActivityDate="2017-02-08T12:30:25.543" Title="How to get username or password on elementary Os?" Tags="|release-loki|security|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10586" PostTypeId="1" CreationDate="2017-02-06T18:31:47.150" Score="1" ViewCount="171" Body="&lt;p&gt;In Nautilus, menus and sub-menus are editable with &lt;code&gt;nautilus-actions-config-tool&lt;/code&gt;, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BEuDo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BEuDo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which gives: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5V2pb.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5V2pb.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in Pantheon Files by manually editing &lt;code&gt;contract&lt;/code&gt; files (added to &lt;code&gt;~/.local/share/contractor&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are these &lt;code&gt;.contract&lt;/code&gt; files editable so that to add sub-menus to the Pantheon Files manager's context menu?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-07T16:48:14.457" LastActivityDate="2017-02-07T16:48:14.457" Title="Can Pantheon Files show sub-menus?" Tags="|release-loki|pantheon-files|context-menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10587" PostTypeId="2" ParentId="10582" CreationDate="2017-02-06T19:34:49.483" Score="1" Body="&lt;p&gt;After trying to fix this countless of times I found a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First I ran&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install -f&lt;/code&gt; (Too see what package gives the problem)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I saw the problem was still there I edited it manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I Located the corrupt package, and removed the whole block of information about it and saved the file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i nano /var/lib/dpkg/status&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After I removed the broken package I ran &lt;code&gt;sudo apt-get install -f&lt;/code&gt; and it fixed apt-get&lt;/p&gt;&#xA;" OwnerUserId="8487" LastActivityDate="2017-02-06T19:34:49.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10588" PostTypeId="2" ParentId="10584" CreationDate="2017-02-06T20:28:54.130" Score="0" Body="&lt;p&gt;If you want to check your username when you are logged in you can just type &lt;code&gt;whoami&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to get username at your local machine, you have all users listed in &lt;code&gt;/etc/passwd&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should have your account listed on greeting screen, if you didn't hide it after install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However if you don't know your username nor password I think that there is no way to log into your account - if it would be so easy then it would make no sense creating accounts - even in windows they repair backdoors caused by recovery mode and cmd mode.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-06T20:28:54.130" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10589" PostTypeId="2" ParentId="10584" CreationDate="2017-02-06T20:30:29.207" Score="0" Body="&lt;p&gt;Try running this command to get the users in the system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;awk -F'[/:]' '{if ($3 &amp;gt;= 1000 &amp;amp;&amp;amp; $3 != 65534) print $1}' /etc/passwd&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are more answers here:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/410244/a-command-to-list-all-users-and-how-to-add-delete-modify-users&quot;&gt;https://askubuntu.com/questions/410244/a-command-to-list-all-users-and-how-to-add-delete-modify-users&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8372" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-06T20:30:29.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10590" PostTypeId="2" ParentId="10584" CreationDate="2017-02-06T20:45:50.970" Score="2" Body="&lt;p&gt;You can just hold down right-shift while booting, and select the second line &quot;elementary OS … &lt;strong&gt;(recovery mode)&lt;/strong&gt;&quot; from the menu. After the boot, you can select &quot;Drop to a root shell prompt&quot; from the menu. You can find your username with &lt;code&gt;ls /home&lt;/code&gt; and you can change your password with &lt;code&gt;passwd username&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-02-08T12:30:25.543" LastActivityDate="2017-02-08T12:30:25.543" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10591" PostTypeId="1" CreationDate="2017-02-07T01:55:48.123" Score="2" ViewCount="573" Body="&lt;p&gt;Two days ago while I was working with OpenShot video editor that was constantly crashing, &lt;em&gt;my home folder got unmounted&lt;/em&gt;. When I tried to access my data there were only two files in my home folder: &lt;strong&gt;Access-Your-Private-Data.desktop&lt;/strong&gt; and a &lt;strong&gt;README.txt file&lt;/strong&gt;. I opened the text file and there was a message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;THIS DIRECTORY HAS BEEN UNMOUNTED TO PROTECT YOUR DATA&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the graphical desktop, click on:&#xA;&quot;Access Your Private Data&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the command line, run:&#xA;ecryptfs-mount-private&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran the &lt;strong&gt;ecryptfs-mount-private&lt;/strong&gt; from the command line where I had to enter my password and my home folder got mounted again. Everything's alright now (I guess) but I still have no idea what happened. I need to know what was going on with my system, what was the cause of the problem. Is there any way to see the log file? Does anyone have any idea what could have caused this and why? Could it be the video editor's fault?&lt;/p&gt;&#xA;" OwnerUserId="8491" LastEditorUserId="8491" LastEditDate="2017-02-07T02:33:41.073" LastActivityDate="2017-02-07T02:33:41.073" Title="(Is it possible to find out) what caused or might have caused my encrypted home folder to get unmounted?" Tags="|system|security|mount|encryption|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10592" PostTypeId="2" ParentId="10522" CreationDate="2017-02-07T02:06:11.937" Score="1" Body="&lt;p&gt;I'm getting a little closer.  There's something about the Vector install on /dev/sdb that grub-mkconfig in elementary does not like.  I disabled OS_PROBER, and voila, update-grub generates a new grub.cfg!  So, I'm only part-way to solved, but I do now have a grub menu at boot. Plymouth is no longer inserting itself, and I don't have the pulsating &quot;e&quot; logo as elementary loads, but I'm okay with that.  As a former Slackware user, I am accustomed to seeing terminal messages scroll.  Thanks for your help.  If I determine what is causing OS_PROBER to choke on Vector, I'll post an update.&lt;/p&gt;&#xA;" OwnerUserId="8435" LastActivityDate="2017-02-07T02:06:11.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10595" PostTypeId="1" AcceptedAnswerId="10603" CreationDate="2017-02-07T09:59:36.933" Score="2" ViewCount="918" Body="&lt;p&gt;I am using elementary.os Loki and Evolution Mail, which I installed through the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I keep installing all the updates, but Evolution will stay at v. 3.18.5.2.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is there a simple possibility to upgrade Evolution to the actual version 3.22?&lt;/li&gt;&#xA;&lt;li&gt;Will it work in Loki?&lt;/li&gt;&#xA;&lt;li&gt;And will it keep my Configuration?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help! :-)&lt;/p&gt;&#xA;" OwnerUserId="8495" LastActivityDate="2017-02-07T12:47:10.080" Title="How can I upgrade 'Evolution Mail and Calendar' to Version 3.22 on Loki?" Tags="|release-loki|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10596" PostTypeId="2" ParentId="10586" CreationDate="2017-02-07T10:32:42.733" Score="2" Body="&lt;p&gt;You can add submenus with plugins (e.g. the dropbox plugin) but I do not think you can with contracts which are essentially app launchers.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-02-07T10:32:42.733" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10597" PostTypeId="2" ParentId="10458" CreationDate="2017-02-07T10:34:16.847" Score="0" Body="&lt;p&gt;I installed a custom colour profile, my blog about eOS has a section on that, &lt;a href=&quot;https://medium.com/@SamMorrowDrums/elementaryos-one-week-in-f512553adde4#ecab&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@SamMorrowDrums/elementaryos-one-week-in-f512553adde4#ecab&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are happy with the colour profile in use on Xubuntu and Windows, you should be able to look at the settings to discover what profiles they are using, probably you can then export it to USB key / shared drive, and then use it on Elementary OS too. You can't screw things up too bad though, as you can just switch to another profile!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to do it yourself, you can try installing &lt;a href=&quot;https://apps.ubuntu.com/cat/applications/natty/gnome-color-manager/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gnome-color-manager&lt;/a&gt; or else you can look up your monitor and see if somebody has made a colour profile for your exact monitor, and try it out. If you want near-perfect colour replication, you will probably wish to avoid eye-strain reduction and night time profiles, as they will make changes to that might be less true, but more comfortable for those use cases.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A major producer of commercial colour profiles is &lt;a href=&quot;http://laptopmedia.com/laptopmedia-profiles-list-of-supported-laptops-and-their-screens/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Laptop Media&lt;/a&gt; you might also find ones on forums etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't have the reliability of light conditions, nor the trust in myself to get it right, so I have used a commercial one, and it has really improved things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps - installing a profile made a world of difference. I'm really enjoying looking at neutral white again!&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-07T10:34:16.847" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="10598" PostTypeId="2" ParentId="7158" CreationDate="2017-02-07T10:45:53.450" Score="1" Body="&lt;p&gt;As @lemonslice said - the answer is to install the SDK package in a terminal window:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install elementary-sdk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did you get your app working? I'm just going through unanswered questions, and some of them are answered in comments, such as this.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-07T10:45:53.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10600" PostTypeId="2" ParentId="3506" CreationDate="2017-02-07T10:59:48.063" Score="1" Body="&lt;p&gt;there is a good change you have a scaling factor applied (which is only intended for HiDPI screens normally).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a terminal type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.gnome.desktop.interface scaling-factor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it outputs anything greater than 1 (mine is &lt;code&gt;uint32 2&lt;/code&gt; ), then you can try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 1&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For reference &lt;code&gt;uint32&lt;/code&gt; is just a description of the &quot;type&quot; of the number, it isn't really interesting to regular users, and it means Unsigned Integer (think positive whole number), stored in 32-Binary Digits (bits).&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-07T10:59:48.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10602" PostTypeId="2" ParentId="9876" CreationDate="2017-02-07T11:08:53.737" Score="2" Body="&lt;p&gt;If you install the dropbox plugin then you get a &quot;Copy Dropbox link&quot; option in the context menu when in your Dropbox folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to use the latest plugin package version - 0.1-0-26 in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to use a contract, you could try running the commands in a terminal e.g. using pantheon-terminal -e [command] as the Exec line.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-02-07T11:08:53.737" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10603" PostTypeId="2" ParentId="10595" CreationDate="2017-02-07T11:12:26.930" Score="1" Body="&lt;p&gt;The short answer is, no. You can't get necessarily get elementary OS versions of packages faster than they are released.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Selected packages for eOS are designed to be stable, and as such, if you want packages before release on eOS, you might need to be prepared to use unsupported packages, and they may or may not work as intended (although often you will be successful).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using the command line, you can add the staging PPA, although this is not considered stable, so remember, this will add potentially unstable gnome3 packages &lt;a href=&quot;https://launchpad.net/~gnome3-team/+archive/ubuntu/gnome3-staging&quot; rel=&quot;nofollow noreferrer&quot;&gt;as listed here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are still willing to proceed you can then do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:gnome3-team/gnome3-staging&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course you should take a backup first, and also - apps in the staging ppa will be moved into the main repository eventually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have problems you can try downgrading again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install evolution=3.18.5.2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You migt need to double check the version number, but that is how you would install a specific version (which can be used to downgrade).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let us know if you do try it, and if you encounter any issues, as nobody can ensure it will definitely work fully, without trying it, and I don't personally use evolution to check for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have not installed a custom PPA before, checkout this previous question / answer for help &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7507/how-can-i-add-a-ppa-in-lokiTop&quot;&gt;How can I add a PPA in Loki?&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-07T12:47:10.080" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10604" PostTypeId="1" AcceptedAnswerId="10688" CreationDate="2017-02-07T15:29:25.327" Score="0" ViewCount="342" Body="&lt;p&gt;This is my first time using any other OS than Windows/Mac. I am astounded by the amount of trouble I'm having trying to get my NVIDIA drivers to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time, after installing I get a black screen even after disabling nouveau drivers by typing &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;nouveau.modeset=0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;in the GRUB. I've also tried &lt;a href=&quot;https://youtu.be/8qd7MFeIwXo&quot; rel=&quot;nofollow noreferrer&quot;&gt;this method&lt;/a&gt; but it didn't work. I've manually enabled 'Software &amp;amp; Updates' and tried installing it that way, but it gets stuck at about 80% and gives me a black screen after rebooting. What am I doing wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a Windows 10/Elementary OS dualboot setup. I'm happy to provide additional information&lt;/p&gt;&#xA;" OwnerUserId="8496" LastEditorUserId="8496" LastEditDate="2017-02-07T17:47:00.947" LastActivityDate="2017-02-12T18:28:22.287" Title="Trouble installing NVIDIA drivers" Tags="|release-loki|display|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10605" PostTypeId="2" ParentId="10604" CreationDate="2017-02-07T15:50:19.730" Score="1" Body="&lt;p&gt;First, delete every nvidia driver related package you have tried to install. Then do the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check what drivers are avaliable for your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers devices | grep -o nvidia-[[:digit:]]*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install the one you want (replace XXX with the correct number):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-XXX &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you have Optimus Technology you would also want to install this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In case you want to fine tune your settings, is recommended to install nvidia-settings as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-07T15:50:19.730" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10608" PostTypeId="1" CreationDate="2017-02-07T18:25:31.490" Score="2" ViewCount="155" Body="&lt;p&gt;When I reboot  I find that I'm not getting new mail notifications and checking the settings shows that the switch for new mail has been set back to off. killing the application and starting it up again does not seem to change this setting. I have pantheon-mail set in my startup applications. Running elementary loki and have a single gmail account connected to mail.&lt;/p&gt;&#xA;" OwnerUserId="6733" LastActivityDate="2018-12-30T12:01:35.330" Title="Mail application resets watch for new mail" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10609" PostTypeId="2" ParentId="10608" CreationDate="2017-02-07T18:57:41.040" Score="1" Body="&lt;p&gt;It sounds like you've encountered a bug in Pantheon Mail. I've experienced a somewhat related issue: when I turn off &quot;always watch for new mail&quot; and close the application, I still get mail notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can report a bug by &lt;a href=&quot;https://elementary.io/docs/code/reference#be-concise-but-explain-the-issue&quot; rel=&quot;nofollow noreferrer&quot;&gt;following these instructions&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-02-07T18:57:41.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10610" PostTypeId="1" AcceptedAnswerId="10611" CreationDate="2017-02-07T19:06:54.627" Score="0" ViewCount="916" Body="&lt;p&gt;I have machine running Loki that has both a VGA port and a display port. I'm using a 23 inch HDTV as my monitor and my resolution works fine when using the VGA port: 1920x1080.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I try to use HDMI, the resolution is all messed up. Since my monitor only has HDMI and not display ports, I'm using one of &lt;a href=&quot;http://rads.stackoverflow.com/amzn/click/B004C9P9TM&quot; rel=&quot;nofollow noreferrer&quot;&gt;these cables&lt;/a&gt;. The resolution still shows 1920x1080, but the top and bottom and a little of the sides are chopped off. It seems as though a simple auto adjustment from my monitor would fix this issue, but I am unable to auto adjust when using HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else had these issues when using HDMI?&lt;/p&gt;&#xA;" OwnerUserId="8500" LastActivityDate="2017-02-07T19:17:57.303" Title="How to fix resolution that isn't accurate when using HDMI?" Tags="|display|desktop|resolution|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10611" PostTypeId="2" ParentId="10610" CreationDate="2017-02-07T19:17:57.303" Score="0" Body="&lt;p&gt;Does the display have overscan settings? Some TVs still crop the edges of the frame off, &lt;a href=&quot;http://www.howtogeek.com/252193/hdtv-overscan-what-it-is-and-why-you-should-probably-turn-it-off/&quot; rel=&quot;nofollow noreferrer&quot;&gt;due to a largely obsolete technology&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a Ubuntu discussion which may be of assistance:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/4358/how-do-i-fix-overscan-on-my-hdmi-hdtv&quot;&gt;https://askubuntu.com/questions/4358/how-do-i-fix-overscan-on-my-hdmi-hdtv&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might be able to fix it on the TV, but basically either you get the TV to stop cropping the frame, or you get the computer to send a larger frame, just so the TV can crop it!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes, this is still a thing in 2017!!!&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-07T19:17:57.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10612" PostTypeId="1" CreationDate="2017-02-07T20:44:48.827" Score="0" ViewCount="1030" Body="&lt;p&gt;I have a dell xps 13 9350 with the i7 cores and quad hd display. I made a bootable usb for elementary OS and am able to run it from the live-USB fine. When i try to install it however, the installer gets stuck at adding a new partition and it does not recognise any of my other partitions. I am running Windows 10 and would like to install elementary alongside that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="8503" LastEditorUserId="8203" LastEditDate="2017-02-09T18:03:39.107" LastActivityDate="2017-02-10T21:20:40.103" Title="Not Recognising Partitions When Attempting Dual Boot install" Tags="|system-installation|dual-boot|" AnswerCount="2" CommentCount="0" ClosedDate="2017-02-19T20:38:28.937" ContentLicense="CC BY-SA 3.0" />
  <row Id="10614" PostTypeId="1" AcceptedAnswerId="10632" CreationDate="2017-02-08T03:32:51.143" Score="0" ViewCount="724" Body="&lt;p&gt;I've created a custom .desktop file to launch an Android Emulator bash script file. I've successfully gotten the file to launch the emulator but I get two icons in Plank. I've read about this happening with Chrome and needing to add StartupWMClass= but I'm not sure what to put after the =&lt;/p&gt;&#xA;&lt;p&gt;Here is my .desktop file that launches my bash script shown below that...&lt;/p&gt;&#xA;&lt;p&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Android Emulator&#xA;Comment=Android Emulator&#xA;Exec=/home/elementary/Tools/Emulator/emulator.sh&#xA;Icon=/home/elementary/Tools/Emulator/emulator_48.png&#xA;Categories=Utility&#xA;Terminal=false&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;!/bin/bash&lt;/h1&gt;&#xA;&lt;p&gt;cd ~/Android/Sdk/tools&#xA;./emulator -avd Emulator -gpu on -qemu -m 2048 -enable-kvm &amp;amp;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-04-10T01:18:24.270" Title="Duplicate Plank Icon for Custom Launcher" Tags="|plank|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10615" PostTypeId="2" ParentId="7972" CreationDate="2017-02-08T05:33:54.847" Score="1" Body="&lt;p&gt;Telling Parallels to 'proceed anyway' and manually selecting Ubuntu Linux as the operating system seems to work. &lt;/p&gt;&#xA;" OwnerUserId="8507" LastActivityDate="2017-02-08T05:33:54.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10616" PostTypeId="1" CreationDate="2017-02-08T09:50:11.927" Score="1" ViewCount="175" Body="&lt;p&gt;How do I make the wingpanel dodge maximized windows? So when I maximize a window, the wingpanel should hide itself.&lt;/p&gt;&#xA;" OwnerUserId="8509" LastEditorUserId="578" LastEditDate="2017-02-08T12:28:58.180" LastActivityDate="2017-02-08T12:28:58.180" Title="How to auto-hide wingpanel when window is maximized?" Tags="|wingpanel|pantheon|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-19T20:46:16.770" ContentLicense="CC BY-SA 3.0" />
  <row Id="10617" PostTypeId="1" CreationDate="2017-02-08T09:54:06.030" Score="6" ViewCount="1103" Body="&lt;p&gt;I'm having regular issues with bluetooth and I could really use some tips on debugging this. Especially in areas it's different from Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm basically having this issue: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5553/bluetooth-applet-disappeared-from-wingpanel&quot;&gt;Bluetooth applet disappeared from wingpanel&lt;/a&gt;.&#xA;But it's closed, since it should be reported in the issue queues, but the issue queues are quite full with unclear, never really resolved bluetooth related issues already. &#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos?field.searchtext=bluetooth+&amp;amp;search=Search&amp;amp;field.status%3Alist=NEW&amp;amp;field.status%3Alist=INCOMPLETE_WITH_RESPONSE&amp;amp;field.status%3Alist=INCOMPLETE_WITHOUT_RESPONSE&amp;amp;field.status%3Alist=CONFIRMED&amp;amp;field.status%3Alist=TRIAGED&amp;amp;field.status%3Alist=INPROGRESS&amp;amp;field.status%3Alist=FIXCOMMITTED&amp;amp;field.assignee=&amp;amp;field.bug_reporter=&amp;amp;field.omit_dupes=on&amp;amp;field.has_patch=&amp;amp;field.has_no_package=&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos?field.searchtext=bluetooth+&amp;amp;search=Search&amp;amp;field.status%3Alist=NEW&amp;amp;field.status%3Alist=INCOMPLETE_WITH_RESPONSE&amp;amp;field.status%3Alist=INCOMPLETE_WITHOUT_RESPONSE&amp;amp;field.status%3Alist=CONFIRMED&amp;amp;field.status%3Alist=TRIAGED&amp;amp;field.status%3Alist=INPROGRESS&amp;amp;field.status%3Alist=FIXCOMMITTED&amp;amp;field.assignee=&amp;amp;field.bug_reporter=&amp;amp;field.omit_dupes=on&amp;amp;field.has_patch=&amp;amp;field.has_no_package=&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like some tips on how I could properly contribute to one of those existing issues or open a new one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I already found out: &#xA;&lt;code&gt;sudo service bluetooth status&lt;/code&gt; for example indicates it's active (running) and restarting it doesn't help. &#xA;All the UI in the Bluetooth panel in System Settings is disabled. &#xA;Is there any way to check if the hardware was detected?&#xA;Is there any way to why the indicator isn't shown in Wingpanel?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dmesg | grep Bluetooth&#xA;[    8.881963] Bluetooth: Core ver 2.21&#xA;[    8.881972] Bluetooth: HCI device and connection manager initialized&#xA;[    8.881974] Bluetooth: HCI socket layer initialized&#xA;[    8.881976] Bluetooth: L2CAP socket layer initialized&#xA;[    8.881979] Bluetooth: SCO socket layer initialized&#xA;[    8.887824] Bluetooth: HCI UART driver ver 2.3&#xA;[    8.887827] Bluetooth: HCI UART protocol H4 registered&#xA;[    8.887828] Bluetooth: HCI UART protocol BCSP registered&#xA;[    8.887829] Bluetooth: HCI UART protocol LL registered&#xA;[    8.887830] Bluetooth: HCI UART protocol ATH3K registered&#xA;[    8.887831] Bluetooth: HCI UART protocol Three-wire (H5) registered&#xA;[    8.887870] Bluetooth: HCI UART protocol Intel registered&#xA;[    8.887885] Bluetooth: HCI UART protocol BCM registered&#xA;[    8.887886] Bluetooth: HCI UART protocol QCA registered&#xA;[   14.015183] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   14.015186] Bluetooth: BNEP filters: protocol multicast&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have an up to date wingpanel bluetooth indicator: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install wingpanel-indicator-bluetooth&#xA;wingpanel-indicator-bluetooth is already the newest version (2.0.1+r7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;4+pkg17~ubuntu0.4.1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ rfkill list&lt;/code&gt; doesn't include a bluetooth device, only one Wireless LAN device. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ lspci -v&lt;/code&gt; doesn't include the word bluetooth.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;bluez-tools's &lt;code&gt;hcitool dev&lt;/code&gt; comes up empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo lsusb | grep Bluetooth&lt;/code&gt; returns nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Loki on a XPS 15 (9550). &#xA;It's bluetooth support is, not great, I had to manually download and copy a file to /lib/firmware/brcm/. (source: &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2317843&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2317843&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; After another suspend later in the day (there have been several that day) suddenly the indicator appeared again.&#xA;Looks like the device is found again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ hcitool dev&#xA;Devices:&#xA;    hci0    9C:B6:D0:D4:B2:52&#xA;&#xA;$ rfkill list&#xA;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo lsusb | grep Bluetooth&lt;/code&gt; and &lt;code&gt;lspci -v | grep bluetooth&lt;/code&gt; still return nothing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lshw&lt;/code&gt; shows the bluetooth device, as one of the usb devices. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update #2:&lt;/strong&gt; I'm now in another state, where &lt;code&gt;rfkill list&lt;/code&gt; lists the device, but &lt;code&gt;hcitool dev&lt;/code&gt; lists no devices. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ hcitool dev&#xA;Devices:&#xA;&#xA;$ rfkill list&#xA;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&#xA;$ dmesg | grep Bluetooth&#xA;[    7.984254] Bluetooth: Core ver 2.21&#xA;[    7.984278] Bluetooth: HCI device and connection manager initialized&#xA;[    7.984281] Bluetooth: HCI socket layer initialized&#xA;[    7.984283] Bluetooth: L2CAP socket layer initialized&#xA;[    7.984287] Bluetooth: SCO socket layer initialized&#xA;[    7.991797] Bluetooth: HCI UART driver ver 2.3&#xA;[    7.991799] Bluetooth: HCI UART protocol H4 registered&#xA;[    7.991800] Bluetooth: HCI UART protocol BCSP registered&#xA;[    7.991800] Bluetooth: HCI UART protocol LL registered&#xA;[    7.991801] Bluetooth: HCI UART protocol ATH3K registered&#xA;[    7.991802] Bluetooth: HCI UART protocol Three-wire (H5) registered&#xA;[    7.991832] Bluetooth: HCI UART protocol Intel registered&#xA;[    7.991849] Bluetooth: HCI UART protocol BCM registered&#xA;[    7.991850] Bluetooth: HCI UART protocol QCA registered&#xA;[    8.416132] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    8.416135] Bluetooth: BNEP filters: protocol multicast&#xA;[    8.416138] Bluetooth: BNEP socket layer initialized&#xA;[   85.464577] Bluetooth: RFCOMM TTY layer initialized&#xA;[   85.464587] Bluetooth: RFCOMM socket layer initialized&#xA;[   85.464593] Bluetooth: RFCOMM ver 1.11&#xA;[25148.516703] Bluetooth: hci0 command 0x200c tx timeout&#xA;[25150.520692] Bluetooth: hci0 command 0x2011 tx timeout&#xA;[25152.524724] Bluetooth: hci0 command 0x200b tx timeout&#xA;[25154.528734] Bluetooth: hci0 command 0x200c tx timeout&#xA;[25188.645084] Bluetooth: hci0 command 0x200c tx timeout&#xA;[25190.649112] Bluetooth: hci0 command 0x2011 tx timeout&#xA;[25192.653938] Bluetooth: hci0 command 0x200b tx timeout&#xA;[25194.657169] Bluetooth: hci0 command 0x200c tx timeout&#xA;[25204.401411] Bluetooth: hci0 command 0x0c1a tx timeout&#xA;[25206.405408] Bluetooth: hci0 command 0x200c tx timeout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2019-05-06T00:49:27.127" Title="How to debug bluetooth" Tags="|release-loki|bluetooth|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10618" PostTypeId="2" ParentId="9154" CreationDate="2017-02-08T11:04:21.813" Score="2" Body="&lt;p&gt;Sometimes the regional mirrors can have issues. Davin Miler is correct, have patience and try again, but alternatively, you can use another mirror (you are using tr.archive.ubuntu.com)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Open your &lt;code&gt;sources.list&lt;/code&gt; file using your favorite text editor, e.g.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Locate the text &lt;code&gt;http://us.archive.ubuntu.com/ubuntu&lt;/code&gt; and replace it&#xA;  with &lt;code&gt;http://archive.ubuntu.com/ubuntu&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The answer for doing this is here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/104701/649018&quot;&gt;https://askubuntu.com/a/104701/649018&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="16827" LastEditDate="2019-04-18T15:49:27.953" LastActivityDate="2019-04-18T15:49:27.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10620" PostTypeId="2" ParentId="10402" CreationDate="2017-02-08T12:46:16.153" Score="1" Body="&lt;p&gt;Just for the record, this issue has been fixed since, you can launch sub-settings via Slingshot again. (cf. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9903/cannot-start-the-specific-sub-system-settings-items-from-applications-launcher&quot;&gt;Cannot start the specific sub-System Settings items from Applications launcher (Slingshot)&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-08T12:46:16.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10621" PostTypeId="2" ParentId="10356" CreationDate="2017-02-08T13:02:30.933" Score="2" Body="&lt;p&gt;You cannot customize this behavior with &lt;code&gt;dconf-editor&lt;/code&gt;, you cannot change it unless you are familiar with programming (look at &lt;code&gt;src/TerminalWidget.vala&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to file a bug at &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-08T13:02:30.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10622" PostTypeId="2" ParentId="10101" CreationDate="2017-02-08T13:11:19.383" Score="0" Body="&lt;p&gt;You can change the key &lt;code&gt;show-desktop&lt;/code&gt; in &lt;code&gt;org.gnome.desktop.wm.keybindings&lt;/code&gt; via &lt;code&gt;dconf-editor&lt;/code&gt; or &lt;code&gt;gsettings&lt;/code&gt; in a terminal window. It defaults to &lt;code&gt;['&amp;lt;Super&amp;gt;Down', '&amp;lt;Super&amp;gt;s']&lt;/code&gt; so if you only want to disable &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;s&lt;/kbd&gt; you can set it to ['down'] for instance.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set org.gnome.desktop.wm.keybindings show-desktop &quot;['&amp;lt;Super&amp;gt;down']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-08T13:11:19.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10623" PostTypeId="1" CreationDate="2017-02-08T14:40:21.750" Score="1" ViewCount="323" Body="&lt;p&gt;I paid for elementary os and it provided the 64 bit version. I need the 32 bit version. Is there a place I can find this?&lt;/p&gt;&#xA;" OwnerUserId="8512" LastEditorUserId="8516" LastEditDate="2017-02-09T18:01:49.970" LastActivityDate="2017-02-09T18:01:49.970" Title="I paid to download the os and it only allowed me to get the 64 bit version. Need the 32 bit version please send a link. Gary Arey" Tags="|download|" AnswerCount="1" CommentCount="1" ClosedDate="2017-02-09T18:02:29.343" ContentLicense="CC BY-SA 3.0" />
  <row Id="10624" PostTypeId="2" ParentId="10623" CreationDate="2017-02-08T14:42:34.110" Score="2" Body="&lt;p&gt;There is no 32bit Loki. If you need 32bit you'll have to run Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://sourceforge.net/projects/elementaryos/files/stable/elementaryos-freya-i386.20150411.iso/download&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://sourceforge.net/projects/elementaryos/files/stable/elementaryos-freya-i386.20150411.iso/download&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-08T16:45:02.957" LastActivityDate="2017-02-08T16:45:02.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10625" PostTypeId="1" AcceptedAnswerId="10626" CreationDate="2017-02-08T14:59:44.800" Score="0" ViewCount="1120" Body="&lt;p&gt;I can't find docs, other than Dell pages saying it's automatic on Ubuntu. There is a .exe installer available from their downloads page, but there are no instructions for setting up on other distros. I'm using Dell XPS 9360.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-08T15:03:45.137" Title="How do I get Dell Firmware Updates on Elementary OS" Tags="|hardware|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10626" PostTypeId="2" ParentId="10625" CreationDate="2017-02-08T15:03:45.137" Score="1" Body="&lt;p&gt;The answer after a lot of searching is to install the firmware management tool:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install fwupd&#xA;fwupdmgr get-devices&#xA;fwupdmgr get-updates&#xA;fwupdmgr update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;These upgrades (if available), may require restart. I am upgrading currently from BIOS 1.2.3 to 1.3.2, and it requires a restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this information on this &lt;a href=&quot;http://en.community.dell.com/techcenter/b/techcenter/archive/2016/02/02/dell-firmware-updating-under-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;community page&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://github.com/hughsie/fwupd/&quot; rel=&quot;nofollow noreferrer&quot;&gt;github page for fwupd also has more info&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For people with other recent machines, this might well provide an upgrade mechanism for their BIOS / firmware too.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-08T15:03:45.137" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10627" PostTypeId="1" CreationDate="2017-02-08T15:44:37.597" Score="4" ViewCount="3725" Body="&lt;p&gt;I would like to migrate elementary OS to my work computer, but I would like to be able to connect my elementary OS to the microsoft mail exchange server. &lt;/p&gt;&#xA;" OwnerUserId="8513" LastActivityDate="2019-08-25T02:09:24.150" Title="How to get a Microsoft Exchange Client to work natively on elementary OS?" Tags="|release-loki|" AnswerCount="4" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10628" PostTypeId="2" ParentId="8940" CreationDate="2017-02-08T16:33:28.507" Score="0" Body="&lt;p&gt;If you have specific issues on Igfx products make sure to look well within their fora. They have an unofficial development of the Linux driver for their products that i used - at least until fedora 22 - But Fedora - most likely because of the Fedora policy against any 3rd party involvement - they were always running late. I have no experience with this as far as &quot;Ubuntu bases&quot; distributions. I have to say that their efforts did improve the performance quite a bit.  &lt;/p&gt;&#xA;" OwnerUserId="8365" LastActivityDate="2017-02-08T16:33:28.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10631" PostTypeId="2" ParentId="9333" CreationDate="2017-02-08T21:11:36.517" Score="1" Body="&lt;p&gt;There is a collision of keyboard shortcuts in default Loki. In gsettings, the &lt;code&gt;logout&lt;/code&gt; key under &lt;code&gt;org.gnome.settings-daemon.plugins.media-keys&lt;/code&gt; has the default value &lt;code&gt;&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Delete&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;So after you have set this key to empty (or anything else you want to):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$  gsettings set org.gnome.settings-daemon.plugins.media-keys logout ''&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can add a custom shortcut to trigger &lt;code&gt;gnome-system-monitor&lt;/code&gt; with this key combination:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/FxI2X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FxI2X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-08T21:11:36.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10632" PostTypeId="2" ParentId="10614" CreationDate="2017-02-08T21:16:27.850" Score="0" Body="&lt;p&gt;Found the answer here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/367396/what-represent-the-startupwmclass-field-of-a-desktop-file&quot;&gt;https://askubuntu.com/questions/367396/what-represent-the-startupwmclass-field-of-a-desktop-file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I needed to identify what to place on a StartWMClass and the command xprop WM_CLASS provided that.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-08T21:16:27.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10633" PostTypeId="2" ParentId="8791" CreationDate="2017-02-09T02:46:01.727" Score="1" Body="&lt;p&gt;I also have an AMD RX 460 based card that I got a few weeks ago which I understand is not quite yet supported by Ubuntu 16.04 (and thus Loki) with the current 4.4 kernel but if you wait for just a few hours (maybe a day or two) the Ubuntu 16.04.2 update release should be out with new 4.8 kernel and Xorg stack which should get you up and running even with the built-in &quot;amdgpu&quot; open source driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FYI, I had already earlier installed the 4.8 preview kernel from the &quot;HWE&quot; (hardware egde) package and newer Xorg stack from the &quot;oibaf&quot; PPA and it's already working smooth for me, so I am looking forward to the official 16.04.2 release and subsequent Loki updates so I can remove the preview package and PPA.&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2017-02-09T02:46:01.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10635" PostTypeId="2" ParentId="9498" CreationDate="2017-02-09T05:24:06.217" Score="2" Body="&lt;p&gt;I successfully used &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt; once a couple of days ago and it worked, but tonight I can't get anything to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt; I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: error: dpkg status database is locked by another process&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I try &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; I get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: /etc/apt/sources.list: Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm curious; why is permission to display a list of PPAs denied the administrator?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At &lt;a href=&quot;https://askubuntu.com/questions/13965/waiting-for-other-software-manager-to-quit&quot;&gt;https://askubuntu.com/questions/13965/waiting-for-other-software-manager-to-quit&lt;/a&gt; it says to check in System Monitor for a process that looks like an apt or an apt-get or a synaptic process and kill it.  I can't see any.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That page also suggests trying &lt;code&gt;sudo rm /var/lib/dpkg/lock&lt;/code&gt; and it didn't  give me an error message but there was no indication that it did anything and I still can't update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have shut the computer down two or three times to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry I can't highlight the commands like you guys have.  I looked at the advanced help and couldn't see how to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:  I just tried to update from the terminal using &lt;code&gt;sudo apt-get update&lt;/code&gt; and this is what I got (I took the http: out of the first nine lines because I had too many links):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 //us.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Ign:2 //dl.google.com/linux/chrome/deb stable InRelease                                         &#xA;Get:3 //security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]                           &#xA;Get:4 //us.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]                          &#xA;Hit:5 //dl.google.com/linux/chrome/deb stable Release                                           &#xA;Hit:7 //ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease                          &#xA;Hit:8 //ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease                      &#xA;Get:9 //us.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]&#xA;&#xA;Fetched 306 kB in 0s (321 kB/s)&#xA;&#xA;E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. &#xA;duane@duane-desktop:~$ sudo dpkg --configure -a&#xA;&#xA;Setting up libdvd-pkg (1.4.0-1-1) ...&#xA;&#xA;debconf: DbDriver &quot;config&quot;: /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable&#xA;&#xA;dpkg: error processing package libdvd-pkg (--configure):&#xA;&#xA;subprocess installed post-installation script returned error exit status 1&#xA;&#xA;Errors were encountered while processing:&#xA; libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There is a process called dconf-service.  Should I end or kill it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't believe it!  I decided to shut things down and go to bed, so I clicked to close the Terminal and it said that there was a process running in the Terminal and, of course, it would quit if I closed.  I closed and then tried updating and the system and Firefox both updated.&lt;br&gt;&#xA;I started using the Terminal because I couldn't update and I had quit Terminal several times during this process, but this time it was different.&lt;br&gt;&#xA;I wish I knew why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I still can't display the list of PPAs.  That's weird.&lt;/p&gt;&#xA;" OwnerUserId="8523" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-09T07:35:01.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10636" PostTypeId="2" ParentId="10627" CreationDate="2017-02-09T07:03:11.117" Score="0" Body="&lt;p&gt;You should be able to easily. I'm not sure if the mail app does, it's worth trying first, and I'm sure it will soon of there are problems, but you should also be able to use Evolution, a mail app which I believe is available in the app store, below is a guide for getting set up on that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.linux.com/learn/use-evolution-connect-microsoft-exchange-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linux.com/learn/use-evolution-connect-microsoft-exchange-linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-09T07:03:11.117" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10637" PostTypeId="2" ParentId="10612" CreationDate="2017-02-09T07:18:27.443" Score="0" Body="&lt;p&gt;I've flagged this question as a duplicate, it's already answered here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16/prepare-for-dual-booting-with-windows&quot;&gt;Prepare for dual-booting with Windows&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, you need to make one of you Partitions smaller so you leave some space on the drive for elementaryOS which will create a new Partitions. &lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-09T07:18:27.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10638" PostTypeId="1" CreationDate="2017-02-09T07:26:06.340" Score="0" ViewCount="148" Body="&lt;p&gt;My File System Drive is around 50 gb, and i want to add around 20 gb to another drive which contains files, how can i achieve that,&#xA;are there any tools or commands to do &lt;/p&gt;&#xA;" OwnerDisplayName="user7862" LastActivityDate="2017-02-09T07:26:06.340" Title="How to add FileSystem disk Drive space to another Disk" Tags="|disk-management|" AnswerCount="0" CommentCount="8" ClosedDate="2019-04-25T16:05:15.293" ContentLicense="CC BY-SA 3.0" />
  <row Id="10639" PostTypeId="1" AcceptedAnswerId="10642" CreationDate="2017-02-09T09:29:00.637" Score="6" ViewCount="466" Body="&lt;p&gt;I have a lot of custom shortcuts with scripts and commands that I would like to backup/restore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can save other configurations like &quot;customized&quot; icons, application launchers and settings from the home folder but I'm not sure shortcuts are among them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How are these stored? are they saved in a config file?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-09T09:37:08.660" LastActivityDate="2017-02-09T15:06:31.957" Title="Save custom keyboard shortcuts ~ possibly backup other configurations" Tags="|release-loki|settings|keyboard-shortcuts|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10640" PostTypeId="1" CreationDate="2017-02-09T10:21:02.237" Score="0" ViewCount="744" Body="&lt;p&gt;I am running elementary OS on a laptop with Intel Haswell integrated graphics and I can no longer detect my external monitor via HDMI. It was working perfectly for the past month, but suddenly today it has stopped working. I don't remember doing anything significant to affect it.&lt;/p&gt;&#xA;" OwnerUserId="8169" LastActivityDate="2017-08-08T20:02:56.577" Title="Cannot detect secondary monitor via HDMI, Intel GPU" Tags="|display|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10641" PostTypeId="1" CreationDate="2017-02-09T10:39:58.760" Score="1" ViewCount="180" Body="&lt;p&gt;I have just installed eOS Loki on a PC that is on a LAN with a Windows 10 PC.&#xA;I can see shared folders on the Win PC from eOS, but haven't been able to work out how to print to the printer that is connected to the Win PC from eOS. I've used CUPS to define a printer, and have tried Internet Printing Protocol (http or https), but then I'm guessing what to put in the IP address field. I'm fairly sure the Win PC has IP address 192.168.0.3 (it pings ok). I've tried &quot;&lt;a href=&quot;http://192.168.0.3:631/ipp/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://192.168.0.3:631/ipp/&lt;/a&gt;&quot; but get &quot;printer not connected&quot;. Can anybody suggest what settings I need?&lt;/p&gt;&#xA;" OwnerUserId="8525" LastActivityDate="2017-02-09T10:39:58.760" Title="How to use a printer on a Windows PC from Loki" Tags="|networking|printer|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10642" PostTypeId="2" ParentId="10639" CreationDate="2017-02-09T15:06:31.957" Score="5" Body="&lt;p&gt;They are stored in the dconf system registry in a list stored by the key &lt;code&gt;custom-keybindings&lt;/code&gt; under &lt;code&gt;org.gnome.settings-daemon.plugins.media-keys&lt;/code&gt;, whereas you have a &lt;code&gt;custom…&lt;/code&gt; entry for each custom shortcut (keybinding, command and name), for instance:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4p7SB.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4p7SB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;TL; DR: so you have to backup the ~/.config/dconf folder&lt;/strong&gt; &lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-09T15:06:31.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10644" PostTypeId="2" ParentId="10640" CreationDate="2017-02-09T16:08:27.193" Score="1" Body="&lt;p&gt;Have you recently installed updates?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's always possible there was an issue / conflict in a new package. Installing new updates could help. You could try booting up to live USB and see if the HDMI works in that setup? Then at least you'll know it's not physically broken hardware or cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use AppCentre or on the command line type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get full-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See if this helps, otherwise checking with live USB is option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have added any additional PPAs they could also have produced a package conflict. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-09T16:08:27.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10645" PostTypeId="1" CreationDate="2017-02-09T17:50:39.210" Score="3" ViewCount="1307" Body="&lt;p&gt;Whenever I launch a Steam game, accidentally press the Windows button and the right arrow key, or something else, it takes me to the second workspace, which comes default with elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to delete it, but I cant find anything on how I can do this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I only want one workspace. What do I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; Oh dear, this is a duplicate question. This has the answer I was looking for: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10013/how-to-disable-the-empty-workspace-when-switching-between-them&quot;&gt;How to disable the empty workspace that appears when switching between them?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8357" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-25T12:49:43.480" Title="How to remove second workspace?" Tags="|settings|desktop|workspace|" AnswerCount="2" CommentCount="0" ClosedDate="2017-02-12T00:59:50.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="10646" PostTypeId="2" ParentId="10645" CreationDate="2017-02-09T18:03:49.580" Score="1" Body="&lt;p&gt;I don't believe there is a way to remove workspaces other than to move or close the app that is sitting in it. To prevent new ones from being created you just need to avoid &quot;activating&quot; one with the keystroke.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-09T18:03:49.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10647" PostTypeId="2" ParentId="10645" CreationDate="2017-02-09T18:04:19.193" Score="4" Body="&lt;p&gt;Empty workspaces are deleted automatically when you stop viewing them.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-02-09T18:04:19.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10648" PostTypeId="2" ParentId="8306" CreationDate="2017-02-09T18:49:48.310" Score="1" Body="&lt;p&gt;reg.exe add HKLM\SYSTEM\CurrentControlSet\Control\TimeZoneInformation /v RealTimeIsUniversal /t REG_DWORD /d 1 /f&lt;/p&gt;&#xA;&#xA;&lt;p&gt;will teach windows how to use utc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source(ger): &lt;a href=&quot;https://de.manjaro.org/index.php?PHPSESSID=q41mtgvu2164dfnqrc5q6gnl17&amp;amp;topic=95.msg714#msg714&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://de.manjaro.org/index.php?PHPSESSID=q41mtgvu2164dfnqrc5q6gnl17&amp;amp;topic=95.msg714#msg714&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8535" LastActivityDate="2017-02-09T18:49:48.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10652" PostTypeId="2" ParentId="10556" CreationDate="2017-02-10T04:19:50.380" Score="1" Body="&lt;p&gt;The elementary team were kind enough to review and accept my patch which is now in trunk! It should be available in Loki's greeter release whenever it next gets an update I believe. Again, this just addresses the 2x2 glitch during the login transition with HiDPI mode and the two bug reports mentioned are likely still open issues. Those bugs are likely due to differing aspect ratios of the monitor versus the wallpaper along with differing from the gala wallpaper scaling type setting like &quot;stretch&quot; or &quot;zoom&quot; or &quot;scaled&quot;.&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2017-02-10T04:19:50.380" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10654" PostTypeId="1" AcceptedAnswerId="10656" CreationDate="2017-02-10T08:58:09.920" Score="0" ViewCount="1102" Body="&lt;p&gt;I'm a complete newbie and just installed elementary loki. I followed post installation tutorial and did: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo mv -v /etc/cron.weekly/fstrim /fstrim&lt;/code&gt; &#xA;(to disable the weekly trim) &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/rc.local&lt;/code&gt; (to add the TRIM command &lt;code&gt;fstrim&lt;/code&gt; for every automatically mounted EXT4 partition on your SSD)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Is that ok?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And another question. is it safe to use TLP and how I stop the computer going to sleep when I'm watching movies?&lt;/p&gt;&#xA;" OwnerUserId="8544" LastEditorUserId="578" LastEditDate="2017-02-10T09:03:57.997" LastActivityDate="2017-02-10T10:41:22.580" Title="SSD optimization?" Tags="|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10655" PostTypeId="1" CreationDate="2017-02-10T10:25:24.507" Score="0" ViewCount="189" Body="&lt;pre&gt;&lt;code&gt;pk@pk:~$ sudo apt-get install -f  shutter&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; shutter : Depends: libgnome2-perl but it is not going to be installed&#xA;           Depends: libgnome2-vfs-perl but it is not going to be installed&#xA;           Depends: libgnome2-wnck-perl but it is not going to be installed&#xA;           Depends: libgoo-canvas-perl but it is not going to be installed&#xA;           Depends: libgtk2-appindicator-perl but it is not installable&#xA;           Depends: libgtk2-imageview-perl but it is not going to be installed&#xA;           Depends: libgtk2-trayicon-perl but it is not going to be installed&#xA;           Depends: libgtk2-unique-perl but it is not going to be installed&#xA;           Depends: libnet-oauth-perl but it is not going to be installed&#xA;           Depends: libproc-processtable-perl but it is not going to be installed&#xA;           Depends: perlmagick&#xA;           Depends: libjson-xs-perl but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user7862" LastEditorUserId="84" LastEditDate="2018-05-06T18:17:48.647" LastActivityDate="2018-05-06T18:17:48.647" Title="Cannot Install Shutter Elementary Os" Tags="|software-installation|apt|" AnswerCount="0" CommentCount="5" ClosedDate="2019-04-25T19:13:24.623" ContentLicense="CC BY-SA 3.0" />
  <row Id="10656" PostTypeId="2" ParentId="10654" CreationDate="2017-02-10T10:41:22.580" Score="2" Body="&lt;p&gt;Executing trim every boot or weekly won't make a huge difference unless you are constantly writing lots of data. Anyway, make sure your ssd supports it:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Execute &lt;code&gt;lsblk -D&lt;/code&gt; from a terminal and check the values of &lt;code&gt;DISC-GRAN&lt;/code&gt; and &lt;code&gt;DISC-MAX&lt;/code&gt;. Non zero values indicate trim support.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;TLP is safe and it's also recommended to use it instead of &lt;code&gt;laptop-mode-tools&lt;/code&gt;. So you can install it safely with &lt;code&gt;sudo apt install tlp&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your laptop shouldn't go to sleep if you are watching a movie in fullscreen mode. You can go into fullscreen mode if you double click on the video if you are using the elementary video app.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also disable automatic sleep if you want. Just go to &lt;code&gt;System Settings &amp;gt; Power&lt;/code&gt;. And in there set &lt;code&gt;Turn off display when inactive for:&lt;/code&gt; and &lt;code&gt;Sleep when inactive for:&lt;/code&gt; to &lt;code&gt;Never&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Solid_State_Drives#TRIM&quot; rel=&quot;nofollow noreferrer&quot;&gt;SSD Cite&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-10T10:41:22.580" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10658" PostTypeId="1" CreationDate="2017-02-10T14:39:13.817" Score="3" ViewCount="2379" Body="&lt;p&gt;How to look for the trash and clean them up in elementary OS 0.4 Loki?&lt;/p&gt;&#xA;" OwnerUserId="8546" LastActivityDate="2017-02-11T04:40:53.427" Title="clean up trash in elementary OS 0.4 Loki" Tags="|release-loki|pantheon-files|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10659" PostTypeId="2" ParentId="10658" CreationDate="2017-02-10T14:50:31.377" Score="2" Body="&lt;p&gt;What trash are you speaking of? If you mean items in your trash folder, just delete them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you mean files/libraries that are no longer needed you can run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can also install bleachbit to clear up lingering &quot;junk&quot; files&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install bleachbit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="578" LastEditDate="2017-02-10T15:53:19.047" LastActivityDate="2017-02-10T15:53:19.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10660" PostTypeId="2" ParentId="10658" CreationDate="2017-02-10T15:54:32.603" Score="2" Body="&lt;p&gt;You can access the Trash in &lt;em&gt;Pantheon Files&lt;/em&gt; via &lt;code&gt;trash:///&lt;/code&gt; or the sidebar icon trash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can empty it by right-clicking on the icon and selecting &lt;em&gt;Empty Trash&lt;/em&gt; from the menu.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-10T15:54:32.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10661" PostTypeId="2" ParentId="6894" CreationDate="2017-02-10T16:47:26.900" Score="1" Body="&lt;p&gt;If you are comfortable using the command line, the advice here will help you:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/MountWindowsSharesPermanently&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/MountWindowsSharesPermanently&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, you need to create an entry in /etc/fstab that will try to mount your drive with password provided automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps there is a way the GUI could be improved, but in the short term this should solve your problem (if you are regularly away from the share's network, it will cause a failed mount, but I think that is OK so long as you don't make any system stuff dependent)&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-10T16:47:26.900" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10663" PostTypeId="2" ParentId="3836" CreationDate="2017-02-10T18:05:39.493" Score="0" Body="&lt;h2&gt;The same in Loki:&lt;/h2&gt;&#xA;&lt;p&gt;Inspired by a comment by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/218/shrestha-aj&quot;&gt;shrestha-aj&lt;/a&gt; under other answer:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.nemo.desktop show-desktop-icons false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In Dconf Editor:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0Kiry.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0Kiry.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-10T18:05:39.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10664" PostTypeId="1" AcceptedAnswerId="10679" CreationDate="2017-02-10T18:38:49.777" Score="6" ViewCount="2878" Body="&lt;p&gt;I'm prototyping an application using Vala, in hope of targeting elementary OS. It was actually the elementary website at &lt;a href=&quot;https://developer.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Build for elementary OS&lt;/a&gt; that first steered me towards Vala.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, Gnome is pushing back on new development using Vala:&#xA;&lt;a href=&quot;https://twitter.com/ebassi/status/827482509982195712&quot; rel=&quot;nofollow noreferrer&quot;&gt;PSA&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;@ebassi:&#xA;  PSA: if you want to write a new @gnome application, don't use Vala; if you're already using it, consider porting to a non-dead language.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This leaves my project in limbo of sorts - I've placed it on hold while I determine my best path forward.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is very frustrating -&#xA;Will elementary take over support of Vala? Or will you be guiding us to use a different dev tool?&lt;/p&gt;&#xA;" OwnerUserId="4254" LastEditorUserId="308" LastEditDate="2018-08-07T18:34:47.990" LastActivityDate="2019-12-19T03:04:43.567" Title="Concern about the future of vala" Tags="|development|vala|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10665" PostTypeId="2" ParentId="10664" CreationDate="2017-02-10T18:42:26.803" Score="0" Body="&lt;p&gt;Technically the &quot;official&quot; language of the Gnome project is JS, but support Vala because of it's popularity among developers.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-10T18:42:26.803" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="10666" PostTypeId="2" ParentId="10658" CreationDate="2017-02-10T19:35:34.353" Score="1" Body="&lt;p&gt;You can install the &lt;code&gt;trash-cli&lt;/code&gt; package&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install trash-cli&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To list files run the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trash-list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To clean up the trash run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trash-empty&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To remove files that have been to trash for &lt;code&gt;N&lt;/code&gt; days run :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trash-empty N&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also you can use it as root.&lt;/p&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2017-02-10T19:35:34.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10668" PostTypeId="2" ParentId="10612" CreationDate="2017-02-10T21:20:40.103" Score="0" Body="&lt;p&gt;I assume that you organised partitions properly in earlier part of installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had that problem, because windows 10 is not shutting down when you shutdown it from start menu/any icon that is meant to shutdown computer. It hibernates so that it doesn't take ages to start when you click power button on computer.- probably they wanted to have 'quick' system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem affects also windows files that are not accessible from Linux if it's in this hibernate mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you need to use in windows command &lt;code&gt;shutdown /s /t 0&lt;/code&gt;. It'll shutdown you computer completely. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add shortcut to your desktop or start menu with right click and add shortcut - just type command in the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That solved my problem with installation. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-10T21:20:40.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10669" PostTypeId="2" ParentId="10664" CreationDate="2017-02-11T04:36:36.490" Score="4" Body="&lt;p&gt;&lt;strong&gt;More update:&lt;/strong&gt; I came from the future. &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala#News&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala is still alive and kicking!&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update: &lt;a href=&quot;https://twitter.com/DanielFore/status/830230280992534528&quot; rel=&quot;nofollow noreferrer&quot;&gt;They would&lt;/a&gt; and pretty much they are the upstream &lt;a href=&quot;https://github.com/GNOME/vala/commits&quot; rel=&quot;nofollow noreferrer&quot;&gt;considering the commits come from them.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;People keep pushing code upstream so I suggest continuing the use of Vala for your app if you already have started on it. Otherwise, choose any language you personally prefer be it C, Javascript, or Vala. Language wars are as nonsensical to religious wars.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As @daniel-foré has mentioned on a &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5t1un5/what_are_the_plans_for_the_future_of_vala_at/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;reddit post&quot;&gt;reddit post&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Every month some new person declares that x language is better, but we just keep submitting our patches upstream :)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="686" LastEditorUserId="686" LastEditDate="2019-12-19T03:04:43.567" LastActivityDate="2019-12-19T03:04:43.567" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="10671" PostTypeId="1" CreationDate="2017-02-11T07:33:02.507" Score="3" ViewCount="15690" Body="&lt;p&gt;I am running an Elementary OS Loki stable build and confirmed that&#xA;openvpn is present in my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I'd like a comprehensive guide to configuring VPN for privacy on my network connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="8558" LastActivityDate="2021-01-02T16:18:18.200" Title="How to configure vpn on Elementary OS Loki?" Tags="|release-loki|openvpn|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10673" PostTypeId="1" AcceptedAnswerId="10686" CreationDate="2017-02-11T16:27:37.377" Score="2" ViewCount="1088" Body="&lt;p&gt;I'm using a dual monitor setup for my PC. However, since my other display is smaller, I adjusted its DPI/Size using the tutorial below: &lt;a href=&quot;https://wiki.archlinux.org/index.php/HiDPI#Side_display&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/HiDPI#Side_display&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got it working. However, each time I reboot it resets my xrand commands. So I just want to ask where do you suggest to place my xrand command for my displays?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're curious the command is given below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output HDMI2 --auto --scale 2x2 --pos 0x0 --output eDP1 --auto --scale 1.5x1.5 --pos 3840x540&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8564" LastEditorUserId="578" LastEditDate="2017-02-12T13:07:08.623" LastActivityDate="2017-02-12T14:44:53.500" Title="Best place to store xrandr settings?" Tags="|release-loki|display|graphics|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10675" PostTypeId="1" CreationDate="2017-02-11T20:11:34.683" Score="1" ViewCount="157" Body="&lt;p&gt;Epiphany 3.8.10 has way too many bugs to be usable. 3.8.5 has it's share of issues as well, but is more usable overall. Anyone know how to revert back to 3.8.5? I've tried with Synaptic but it's not available in the list. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-11T20:45:17.710" Title="How to revert back to older elementary package?" Tags="|epiphany|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10676" PostTypeId="2" ParentId="10675" CreationDate="2017-02-11T20:45:17.710" Score="4" Body="&lt;p&gt;Use &lt;code&gt;apt-get install «pkg»=«version»&lt;/code&gt;.&#xA;That should downgrade your application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll also need to hold the package from updates with &lt;code&gt;sudo apt-mark hold package_name&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-11T20:45:17.710" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="10677" PostTypeId="1" CreationDate="2017-02-11T21:54:01.410" Score="0" ViewCount="243" Body="&lt;p&gt;just have installed this OS (loki) and I really like it but there is a thing I am worry about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have noticed that something keeps downloading data and keeps my cpu busy right after start of system. System monitor showing me data usage and cpu activity (one of 4 cores always on 100%) even if I dont do anything. There is nothing in processes either. Every process shown has very low cpu usage. I used to have Ubuntu on my previous laptop with same programs installed and there was no such a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much!&lt;/p&gt;&#xA;" OwnerUserId="8568" LastEditorUserId="8568" LastEditDate="2017-02-14T08:17:22.180" LastActivityDate="2018-02-14T15:14:26.970" Title="downloading lots of data and keeps my cpu busy right after start" Tags="|release-loki|cpu|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10678" PostTypeId="2" ParentId="10432" CreationDate="2017-02-11T22:50:09.157" Score="10" Body="&lt;p&gt;I managed to make it work with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone http://github.com/bulletmark/libinput-gestures&#xA;cd libinput-gestures&#xA;sudo make install&#xA;sudo apt install libinput-tools xdotool&#xA;sudo gpasswd -a $USER input&#xA;libinput-gestures-setup autostart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And create the file '~/.config/libinput-gestures.conf' with the next contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gesture swipe up xdotool key super+Left    &#xA;gesture swipe down xdotool key super+Right&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then log out and log in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you will change desktop with 3 fingers 'up' and 'down' swipe. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also works with 'swipe left' and 'swipe right' but it is very clumsy on my macbook so I prefer the 'up/down' movement.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is not as fast and comfortable as OSX, but something similar.&lt;/p&gt;&#xA;" OwnerUserId="8569" LastEditorUserId="578" LastEditDate="2017-02-11T23:02:11.670" LastActivityDate="2017-02-11T23:02:11.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10679" PostTypeId="2" ParentId="10664" CreationDate="2017-02-12T02:54:16.583" Score="7" Body="&lt;p&gt;Emmanuele's position seems to be that there are better alternatives to Vala, so you should use them instead; based on his tweet about LLVM-based languages, I'm guessing he is a fan of Rust.  I've played with Rust a bit, and while I prefer it to JS and Python, I like Vala much better…  For me, Rust isn't a &lt;em&gt;better&lt;/em&gt; alternative, it's an &lt;em&gt;worse&lt;/em&gt; alternative (though still better than JS or Python).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every language has its warts.  Emmanuele mentions some of Vala's big ones, but if those warts don't bother you why should you care?  If you're happy with the current gdb support, what does it matter that it's not better?  I may not be a typical user, but I actually prefer debugging the generated C since it gives me a better view of what is really going on.  Vala isn't be seeing a lot of new feature development (especially compared to languages like Rust and JS), but it's still alive.  Personally, I don't feel a great need for most of the features it's lacking, and I find it it much more pleasant than the other options for writing GNOME/GTK+ applications, so I'll continue to develop new applications in Vala where appropriate.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If something major which is lacking from Vala right now is a deal-breaker for you, you probably shouldn't get your hopes up that someone else will add that feature for you down the line, and should instead move on.  Your other choices right now are basically JavaScript, Python, and C (Rust is coming up quickly, I think it will be a viable choice very soon).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, ebassi != GNOME.  I have a lot of respect for him (and, therefore, his opinion), but the story isn't &quot;GNOME discourages using Vala for new projects&quot;, it's &quot;a prominent GNOME developer discourages using Vala for new projects&quot;.  GNOME recommends JavaScript for new projects, and has for a while (a couple years, IIRC) now.  That said, new applications are still being written in Vala, Python, C, and &lt;em&gt;whatever people want to write them in&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2017-02-12T02:54:16.583" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10680" PostTypeId="1" CreationDate="2017-02-12T07:16:08.183" Score="1" ViewCount="403" Body="&lt;p&gt;I've been using scratch for quite some time and its features as an IDE are very limited. So I was wondering how to develop/install new third party plugins for it but I was unable to find any documentation pertaining to it. Is it possible? If yes,then how? &lt;/p&gt;&#xA;" OwnerUserId="8574" LastActivityDate="2017-02-15T19:02:49.357" Title="How to write plugin for scratch text editor from elementary os?" Tags="|development|code|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10681" PostTypeId="2" ParentId="10673" CreationDate="2017-02-12T08:05:28.340" Score="1" Body="&lt;p&gt;You could add it to a file called ~/.bash_profile which fires when you log in. The issue with automating it is that it might misbehave if you aren't always in this setup, and also it'll run every time you open a shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just leave mine in ~/dual.sh and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sh ~/dual.sh &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, occasionally monitor commands have caused things to crash, so automatically running will potentially make troubleshooting more annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It might be possible to create a system startup script, however then you'll probably want to write a more comprehensive script, and I think you need to run these settings after desktop has loaded. &lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="8203" LastEditDate="2017-02-12T09:18:11.597" LastActivityDate="2017-02-12T09:18:11.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10683" PostTypeId="1" AcceptedAnswerId="10700" CreationDate="2017-02-12T10:12:51.750" Score="2" ViewCount="365" Body="&lt;p&gt;The middle click button of the mouse I use is broken, so I'd like to simulate it by pressing left and right mouse buttons at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Freya, I could do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput set-prop &quot;Wireless Optical Mouse&quot; &quot;Evdev Middle Button Emulation&quot; 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But in Loki, I get this message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;property 'Evdev Middle Button Emulation' doesn't exist, you need to specify its type and format&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'd like the simulation to persist across reboots and suspends.&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2017-02-13T15:10:33.467" Title="How to simulate middle mouse click in Loki?" Tags="|release-loki|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10684" PostTypeId="1" CreationDate="2017-02-12T13:28:20.723" Score="7" ViewCount="2091" Body="&lt;p&gt;i've searched here, reddit, launchpad and google but couldn't find the information. I wanted to know what shortcuts are available for Files. Checked keyboard shortcuts settings but none was listed. Appreciate if someone can point me to where it is. &lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2020-09-14T17:31:35.897" Title="list of keyboard shortcuts for Files" Tags="|pantheon-files|keyboard-shortcuts|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10685" PostTypeId="2" ParentId="10684" CreationDate="2017-02-12T13:43:55.880" Score="7" Body="&lt;p&gt;Ok, i searched deeper into the source code for pantheon-files and found these :)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; (&quot;win.quit&quot;, {&quot;&amp;lt;Ctrl&amp;gt;Q&quot;});&#xA; (&quot;win.new_window&quot;, {&quot;&amp;lt;Ctrl&amp;gt;N&quot;});&#xA; (&quot;win.undo&quot;, {&quot;&amp;lt;Ctrl&amp;gt;Z&quot;});&#xA; (&quot;win.redo&quot;, {&quot;&amp;lt;Ctrl&amp;gt;&amp;lt;Shift&amp;gt;Z&quot;});&#xA; (&quot;win.select_all&quot;, {&quot;&amp;lt;Ctrl&amp;gt;A&quot;});&#xA; (&quot;win.bookmark&quot;, {&quot;&amp;lt;Ctrl&amp;gt;D&quot;});&#xA; (&quot;win.find&quot;, {&quot;&amp;lt;Ctrl&amp;gt;F&quot;});&#xA; (&quot;win.tab::NEW&quot;, {&quot;&amp;lt;Ctrl&amp;gt;T&quot;});&#xA; (&quot;win.tab::CLOSE&quot;, {&quot;&amp;lt;Ctrl&amp;gt;W&quot;});&#xA; (&quot;win.tab::NEXT&quot;, {&quot;&amp;lt;Ctrl&amp;gt;Page_Down&quot;});&#xA; (&quot;win.tab::PREVIOUS&quot;, {&quot;&amp;lt;Ctrl&amp;gt;Page_Up&quot;});&#xA; (&quot;win.view_mode::ICON&quot;, {&quot;&amp;lt;Ctrl&amp;gt;1&quot;});&#xA; (&quot;win.view_mode::LIST&quot;, {&quot;&amp;lt;Ctrl&amp;gt;2&quot;});&#xA; (&quot;win.view_mode::MILLER&quot;, {&quot;&amp;lt;Ctrl&amp;gt;3&quot;});&#xA; (&quot;win.zoom::ZOOM_IN&quot;, {&quot;&amp;lt;Ctrl&amp;gt;plus&quot;, &quot;&amp;lt;Ctrl&amp;gt;equal&quot;});&#xA; (&quot;win.zoom::ZOOM_OUT&quot;, {&quot;&amp;lt;Ctrl&amp;gt;minus&quot;});&#xA; (&quot;win.zoom::ZOOM_NORMAL&quot;, {&quot;&amp;lt;Ctrl&amp;gt;0&quot;});&#xA; (&quot;win.show_hidden&quot;, {&quot;&amp;lt;Ctrl&amp;gt;H&quot;});&#xA; (&quot;win.refresh&quot;, {&quot;&amp;lt;Ctrl&amp;gt;R&quot;, &quot;F5&quot;});&#xA; (&quot;win.go_to::HOME&quot;, {&quot;&amp;lt;Alt&amp;gt;Home&quot;});&#xA; (&quot;win.go_to::TRASH&quot;, {&quot;&amp;lt;Alt&amp;gt;T&quot;});&#xA; (&quot;win.go_to::NETWORK&quot;, {&quot;&amp;lt;Alt&amp;gt;N&quot;});&#xA; (&quot;win.go_to::SERVER&quot;, {&quot;&amp;lt;Alt&amp;gt;C&quot;});&#xA; (&quot;win.go_to::UP&quot;, {&quot;&amp;lt;Alt&amp;gt;Up&quot;});&#xA; (&quot;win.go_to::FORWARD&quot;, {&quot;&amp;lt;Alt&amp;gt;Right&quot;});&#xA; (&quot;win.go_to::BACK&quot;, {&quot;&amp;lt;Alt&amp;gt;Left&quot;});&#xA; (&quot;win.info::HELP&quot;, {&quot;F1&quot;});&#xA; (&quot;win.info::ABOUT&quot;, {&quot;F3&quot;});&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2017-02-12T13:43:55.880" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10686" PostTypeId="2" ParentId="10673" CreationDate="2017-02-12T14:44:53.500" Score="2" Body="&lt;p&gt;You can do one of the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Using the GUI:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;em&gt;System Settings&lt;/em&gt; &gt; &lt;em&gt;Applications&lt;/em&gt; &gt; &lt;em&gt;Startup&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the + button&lt;/li&gt;&#xA;&lt;li&gt;Type in the xrandr command complete with its arguments&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Creating a &lt;code&gt;.desktop&lt;/code&gt; file and adding it to autostart:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You can make a &lt;code&gt;.desktop&lt;/code&gt; file containing the command as an &lt;code&gt;Exec&lt;/code&gt; key with something like this:&#xA;&lt;code&gt;&#xA;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=XrandrStartup&#xA;GenericName=XrandrStartup&#xA;Comment=Xrandr config startup script&#xA;Icon=preferences-system&#xA;Categories=Settings;&#xA;Exec=xrandr --output HDMI2 --auto --scale 2x2 --pos 0x0 --output eDP1 --auto --scale 1.5x1.5 --pos 3840x540&#xA;TryExec=xrandr&#xA;Terminal=false&#xA;X-GNOME-Autostart-enabled=true&#xA;&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save it on &lt;code&gt;~/.config/autostart&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Based on &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1302/686&quot;&gt;this answer&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="686" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-12T14:44:53.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10687" PostTypeId="2" ParentId="10671" CreationDate="2017-02-12T17:06:04.900" Score="4" Body="&lt;p&gt;So when Pretzel Jones asked who your provider was, he was asking whose VPN are you looking to connect to. Examples might include NordVPN, PrivateInternetAccess and Mullvad, just to name a few.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These services will then provide you with certificates and credentials you can install on your system through OpenVPN that you then connect to once you're online (ie connected to a network by wifi or otherwise).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The procedure there, typically involves downloading an .ovpn file (once you have an active subscription which will usually involve paying for the service) and IMPORTING that configuration file by:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;clicking your network manager icon (usually a wifi symbol if you're already online)&lt;/li&gt;&#xA;&lt;li&gt;selecting &quot;Network Settings&quot;&lt;/li&gt;&#xA;&lt;li&gt;selecting &quot;VPN&quot; in the left hand menu under &quot;Virtual&quot;&lt;/li&gt;&#xA;&lt;li&gt;clicking the &quot;+&quot; icon&lt;/li&gt;&#xA;&lt;li&gt;selecting &quot;Import a saved configuration file&quot;&lt;/li&gt;&#xA;&lt;li&gt;browsing to your .ovpn file&lt;/li&gt;&#xA;&lt;li&gt;hit &quot;Create&quot;&lt;/li&gt;&#xA;&lt;li&gt;Fill in your account info and point network-manager to your certificate files and key files&lt;/li&gt;&#xA;&lt;li&gt;Hit save and connect from the network manager icon drop down menu&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.nordvpn.com/hc/en-us/articles/206927749-Linux-Ubuntu-14-04-setup&quot; rel=&quot;noreferrer&quot;&gt;This guide from NordVPN &lt;/a&gt; is a good reference!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if you have more specific questions as you move through this process and I can update my answer!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some providers do have applications you can install to connect to their service that have some neat features like disable internet if the VPN connection drops.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="5086" LastActivityDate="2017-02-12T17:06:04.900" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10688" PostTypeId="2" ParentId="10604" CreationDate="2017-02-12T18:28:22.287" Score="0" Body="&lt;p&gt;I solved my issue by turning off secure boot in BIOS.&lt;/p&gt;&#xA;" OwnerUserId="8496" LastActivityDate="2017-02-12T18:28:22.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10690" PostTypeId="2" ParentId="6840" CreationDate="2017-02-12T19:59:41.253" Score="0" Body="&lt;p&gt;I'm trying to add icon instead the name applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/agaeI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/agaeI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit &lt;code&gt;/usr/share/themes/yourtheme/gtk.css&lt;/code&gt; and add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; /*********&#xA; * Panel *&#xA; ********/&#xA;&#xA;.panel {&#xA;    /*background-color: transparent;*/&#xA;    background-color: #000;&#xA;    background-image: url(&quot;elementaryicon.png&quot;); &#xA;    background-repeat: no-repeat;&#xA;    font-size:0px !important;&#xA;    transition: all 100ms ease-in-out;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I search now to remove the name applications.&lt;/p&gt;&#xA;" OwnerUserId="8583" LastEditorUserId="26" LastEditDate="2017-02-24T06:02:32.687" LastActivityDate="2017-02-24T06:02:32.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10691" PostTypeId="1" CreationDate="2017-02-12T21:22:35.620" Score="4" ViewCount="667" Body="&lt;p&gt;I've created a Minecraft desktop entry, which works fine, but when I launch Minecraft it creates a new icon in my dock.  I know that this isn't really an issue but I switched to elementary OS because I wanted to make everything look perfect.  So, how could I fix it so that when I launch Minecraft through the launcher it doesn't create a new icon?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/v4NoD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v4NoD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aDlZy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aDlZy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I figured out this has to do with the WMClass thanks to this post &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3466/how-to-fix-netbeans-8-1-double-icons-on-plank?rq=1&quot;&gt;How to fix Netbeans 8.1 double icons on plank&lt;/a&gt;.  But the issue now is that I can only have one &lt;code&gt;StartupWMClass=Minecraft 1.11.2&lt;/code&gt; which won't change when minecraft updates and causes the launcher to create it's own icon.  So I have to find a way to launch minecraft with a custom WMClass.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 2 - .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Minecraft&#xA;Comment=Play Minecraft&#xA;Type=Application&#xA;Exec=java -jar /home/will/.minecraft/launcher.jar&#xA;Icon=/usr/share/applications/Minecraft.png&#xA;Terminal=false&#xA;Categories=Other;&#xA;StartupWMClass=Minecraft 1.11.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user8585" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-15T15:24:08.540" Title="Two Icons showing in Dock for Minecraft using Custom .desktop file" Tags="|plank|icons|launcher|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10693" PostTypeId="2" ParentId="10472" CreationDate="2017-02-13T04:28:01.670" Score="0" Body="&lt;p&gt;I had the same problem. I fixed it by doing the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should get the icons back, but if you were using something like nautilus file manager, then you will have 2 different &quot;files&quot; folders show up in your applications menu. &lt;/p&gt;&#xA;" OwnerUserId="8588" LastEditorUserId="578" LastEditDate="2017-02-13T05:13:26.217" LastActivityDate="2017-02-13T05:13:26.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10694" PostTypeId="2" ParentId="10529" CreationDate="2017-02-13T06:26:49.763" Score="2" Body="&lt;p&gt;This bug was introduced in 3.18.10 and is fixed in 3.18.11 with &lt;a href=&quot;https://git.gnome.org/browse/epiphany/commit/?h=gnome-3-18&amp;amp;id=0f67243b5bba89ee5fa6f762fcc267354e61a615&quot; rel=&quot;nofollow noreferrer&quot;&gt;this commit&lt;/a&gt;. You can wait for the updated package to come down the pipeline or make the change yourself as I did:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;% sudo apt-get install build-essential&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% sudo apt-get build-dep epiphany-browser&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% apt-get source epiphany-browser&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% cd epiphany-browser-3.18.10&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Make the changes from the commit I linked to: edit src/ephy-window.c, make a new line after line 882 and put the code &lt;code&gt;return TRUE;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% dpkg-buildpackage -us -uc&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% cd ..&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% sudo dpkg -i epiphany-browser*.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;% sudo apt-get -f install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="8570" LastEditorUserId="8570" LastEditDate="2017-02-13T23:43:45.660" LastActivityDate="2017-02-13T23:43:45.660" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="10697" PostTypeId="1" AcceptedAnswerId="10698" CreationDate="2017-02-13T11:19:37.733" Score="1" ViewCount="1121" Body="&lt;p&gt;Slingshot is installed and works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JW3nS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JW3nS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But trying to get some info on it in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cipeos@cipeos-HP:~$ slingshot-launcher -h&#xA;slingshot-launcher: command not found&#xA;cipeos@cipeos-HP:~$ slingshot-launcher --help&#xA;slingshot-launcher: command not found&#xA;cipeos@cipeos-HP:~$ slingshot-launcher -help&#xA;slingshot-launcher: command not found&#xA;cipeos@cipeos-HP:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall slingshot-launcher&#xA;slingshot-launcher: no process found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-02-13T12:35:28.590" Title="How to access help for Slingshot launcher?" Tags="|release-loki|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10698" PostTypeId="2" ParentId="10697" CreationDate="2017-02-13T12:35:28.590" Score="3" Body="&lt;p&gt;You can search for other questions, in terms of customising the menus, I'm not sure what you need to achieve, but this is what I've found so far...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find out about commands you can type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;man slingshot-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To locate installed files you can do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -L slingshot-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You need to run commands to actually use it via wingpanel, which you can interact with on the command line. I believe the command to show it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wingpanel --toggle-indicator app-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;man page for slingshot is mostly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OPTIONS&#xA;       -h, --help&#xA;              Show help message and exit&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   -v, --version&#xA;          Print version info and exit&#xA;&#xA;   -s, --silent&#xA;          Launch Slingshot as a background process without it appearing visually&#xA;&#xA;   -c, --command-mode&#xA;          Not implemented yet&#xA;&#xA;   --display=DISPLAY&#xA;          X display to use&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-13T12:35:28.590" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10699" PostTypeId="1" CreationDate="2017-02-13T13:14:12.883" Score="1" ViewCount="80" Body="&lt;p&gt;Does the Pantheon-mail program have the ability to download NO ATTACHMENTS and to say how many days to download (like the user friendly gmail android app does)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so let me know.  I will set it up. I am afraid to otherwise and there is no information on this. For some reason, in my past experience, only thunderbird allows this and it does not do a good job either.  Geary had no options and wanted me to pay for some (I am a monk).  I gave up (so far) and use the web for desktop mail and my phone to see offline stuff.&#xA;It seems very intuitive and Pantheon email would have an interface that mimics the easy to use, we researched gmail app, which is sort of the goal (I hope). &lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-02-13T15:21:50.397" LastActivityDate="2017-02-13T15:21:50.397" Title="Does Pantheon-Mail allow download options" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10700" PostTypeId="2" ParentId="10683" CreationDate="2017-02-13T15:10:33.467" Score="2" Body="&lt;p&gt;I got this working. Firstly I needed to change the property name. Then I could use that with the xinput command inside ~/.profile. Thanks to &lt;a href=&quot;https://unix.stackexchange.com/a/211863/206357&quot; title=&quot;Run script on screen lock/unlock&quot;&gt;this&lt;/a&gt; Unix Stackexchange answer, I am able to execute the xinput command after each unlock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what I added to my ~/.profile:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;simulate_mouse_middle() {&#xA;    xinput set-prop &quot;Wireless Optical Mouse&quot; &quot;libinput Middle Emulation Enabled&quot; 1&#xA;}&#xA;&#xA;simulate_mouse_middle&#xA;&#xA;dbus-monitor --session &quot;type='signal',interface='com.ubuntu.Upstart0_6'&quot; | \&#xA;(&#xA;    while true; do&#xA;        read X&#xA;        if echo $X | grep &quot;desktop-unlock&quot; &amp;amp;&amp;gt; /dev/null; then&#xA;            simulate_mouse_middle&#xA;        fi&#xA;     done&#xA;) &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2444" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-02-13T15:10:33.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10702" PostTypeId="2" ParentId="7528" CreationDate="2017-02-13T20:09:16.077" Score="2" Body="&lt;p&gt;I found that after running &lt;code&gt;setpci&lt;/code&gt; I needed to reload the &lt;code&gt;apple_gmux&lt;/code&gt; module, so my &lt;code&gt;/etc/rc.local&lt;/code&gt; looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh -e&#xA;#&#xA;# rc.local&#xA;#&#xA;# This script is executed at the end of each multiuser runlevel.&#xA;# Make sure that the script will &quot;exit 0&quot; on success or any other&#xA;# value on error.&#xA;#&#xA;# In order to enable or disable this script just change the execution&#xA;# bits.&#xA;#&#xA;# By default this script does nothing.&#xA;&#xA;setpci -v -H1 -s 00:01.00 BRIDGE_CONTROL=0&#xA;modprobe -r apple_gmux&#xA;modprobe apple_gmux&#xA;&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8570" LastActivityDate="2017-02-13T20:09:16.077" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10703" PostTypeId="1" CreationDate="2017-02-14T04:46:52.087" Score="2" ViewCount="3460" Body="&lt;p&gt;I'm trying to install the gnome software centre but its is giving me this error in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-software&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; gnome-software : Depends: appstream but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have used synaptic package manager. But no broken packages shown.&lt;/p&gt;&#xA;" OwnerUserId="8595" LastEditorUserId="578" LastEditDate="2017-02-14T07:28:19.430" LastActivityDate="2020-05-31T19:25:01.883" Title="Gnome software centre is not installing" Tags="|appcenter|thirdpartyapps|dependencies|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10704" PostTypeId="1" AcceptedAnswerId="16216" CreationDate="2017-02-14T05:51:23.690" Score="5" ViewCount="341" Body="&lt;p&gt;This appears to happen with a lot of other apps like MonoDevelop, WebStorm, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The right click title bar &quot;Always on visible workspace&quot; is not available on any browser other than the default provided by elementary OS.  In chrome, i have tried the &quot;Right click on title bar, choose 'use system title bar and borders'&quot; but right-clicking on that yields no menu.  I have tried same with Firefox and Opera but cannot get the option to keep the browser on all workspaces.&lt;/p&gt;&#xA;" OwnerUserId="8597" LastEditorUserId="84" LastEditDate="2018-05-06T18:17:16.220" LastActivityDate="2018-10-06T13:00:06.647" Title="Can I configure an app to be always visible across all workspaces?" Tags="|window-management|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10705" PostTypeId="1" AcceptedAnswerId="10769" CreationDate="2017-02-14T09:46:03.487" Score="5" ViewCount="7817" Body="&lt;p&gt;I would like to be able to switch between the open windows of one application by using (or assigning first) a shortcut (like I do in Ubuntu, Linux Mint and MacOS).&lt;/p&gt;&#xA;&lt;p&gt;I have often more than one window open of one application like chrome or an IDE and I want to quickly move between them.&#xA;Yes I know I can move the mouse over the icon and scroll or right click, but this involves taking my hands of the keyboard. I want a keyboard shortcut like in all the other OS I'm using.&lt;/p&gt;&#xA;&lt;p&gt;Yes I know of &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;TAB&lt;/kbd&gt; and workspaces but this is no real substitute for such a basic functionality.&#xA;I couldn't find the corresponding action under Keyboard--&amp;gt;Shortcuts--&amp;gt;Windows; is it seems missing?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I also don't mean &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;PageUp/PageDn&lt;/kbd&gt;.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;(In Ubuntu, Linux Mint and MacOS the shortcut I'm refering to is taken care by the window manager while the proposed &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;PageUp/PageDn&lt;/kbd&gt; has to be implemented by the application itself.)&lt;/p&gt;&#xA;&lt;p&gt;The behavior is not consistent and often missing. For example &lt;strong&gt;in Chrome this shortcut switches between Tabs and not Windows&lt;/strong&gt;. And for elementary built in apps like Terminal or Files it is not implemented. In this list of shortcuts &lt;a href=&quot;http://lmelinux.net/2014/07/26/elementary-os-keyboard-shortcuts/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;shortcut list&quot;&gt;here&lt;/a&gt; the shortcut I'm looking for is not mentioned.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know maybe the underlying system command so I can create custom shortcut? Or hot to configure xbindkeys to allow window switching?&#xA;Or is this functionality completely missing from elementary?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Edit:&#xA;Cipricus created a great answer here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4844/how-does-one-cycle-through-windows-of-the-same-application&quot;&gt;How does one cycle through windows of the same application?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And it seems the functionality is missing while in Ubuntu it's available.&#xA;See : &lt;a href=&quot;https://i.stack.imgur.com/sewJD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/sewJD.jpg&lt;/a&gt;&#xA;The shortcut in Ubuntu ist &lt;kbd&gt;ALT&lt;/kbd&gt;+ &lt;kbd&gt;GRAVE&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;p&gt;I know Plank can do it by scrolling so is there any way I can use that to create a shortcut to switch the windows? Where could I request that feature?&lt;/p&gt;&#xA;&lt;p&gt;I know that elementary has all the nice workspaces to organize your work but I feel that is a very basic functionality missing here. MacOS also has a similar workspace organization and there the shortcut exists without problems and I make heavy use of it.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h3&gt;Edit about closing this as duplicate:&lt;/h3&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/4844/170&quot;&gt;How does one cycle through windows of the same application?&lt;/a&gt; seems to ask the same thing but its &lt;a href=&quot;https://elementaryos.stackexchange.com/a/4861/170&quot;&gt;answer&lt;/a&gt; is the one tested and not working as indicated above:  &lt;strong&gt;&lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;PageUp/PageDn&lt;/kbd&gt; is not working&lt;/strong&gt;. - Also, the &lt;a href=&quot;http://lmelinux.net/2014/07/26/elementary-os-keyboard-shortcuts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt; posted for that is not confirming it: it does not mention such a shortkey at all!&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/1441/170&quot;&gt;What are the different methods to switch between windows and workspaces?&lt;/a&gt; - asks precisely this at its first point, that is: &lt;strong&gt;between windows of the same application on the same workspace&lt;/strong&gt; (implying of course 'only between those of the same application'; without that implication, cycling &lt;strong&gt;all&lt;/strong&gt; windows will eventually cycle those of the application that has multiple windows open: but that's not the point). - Anyway, Daniel Foré's &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1479/170&quot;&gt;answer&lt;/a&gt; marked as definitive gives a lot of details but &lt;strong&gt;doesn't answer the first point&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5309" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-17T14:57:07.690" Title="Switch only between windows of the same application (not tabs)?" Tags="|keyboard-shortcuts|window-management|window-manager|" AnswerCount="1" CommentCount="5" ClosedDate="2017-02-19T20:40:04.130" ContentLicense="CC BY-SA 3.0" />
  <row Id="10706" PostTypeId="2" ParentId="10703" CreationDate="2017-02-14T10:43:30.743" Score="2" Body="&lt;p&gt;Actually this issue is dealt with here: &lt;a href=&quot;https://askubuntu.com/questions/879495/update-after-purging-intel-01-org-driver-removed-gnome-software/879516&quot;&gt;https://askubuntu.com/questions/879495/update-after-purging-intel-01-org-driver-removed-gnome-software/879516&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a problem with Ubuntu Xenial packages I believe, and could quite possibly be the cause of your issue. I don't think technically this is an elementary OS issue, but an issue affecting all Ubuntu 16.4 distros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt policy appstream&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now copy a full version number that is not 0.10.16-1 (example 0.10.3-1~ubuntu16.04~ppa2), and then use that in the command replacing  with the corresponding version number.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt install appstream=&amp;lt;version number&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt install gnome-software ubuntu-software&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm hoping this fix is correct for you and translates to eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And here is the official bug &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1661460&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1661460&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-14T10:43:30.743" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10707" PostTypeId="2" ParentId="10346" CreationDate="2017-02-14T11:43:57.217" Score="1" Body="&lt;p&gt;Did you try &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10346/how-to-access-desktop-on-a-headless-loki-machine&quot;&gt;making it run at start up&lt;/a&gt;, make sure you've done all of this first to ensure the service is running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try running &lt;code&gt;sudo service lightdm restart&lt;/code&gt; after ensuring that the VNC server is running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not able to make it work, you can also look at logs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls ~/.local/share/xorg/&#xA;cat ~/.local/share/xorg/Xorg.1.log (or whatever recent log is called)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, what is the output of &lt;code&gt;xrandr&lt;/code&gt; when VNC is running? I'm assuming at some point the virtual monitor should appear...&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-14T11:43:57.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10708" PostTypeId="2" ParentId="10336" CreationDate="2017-02-14T11:50:10.520" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/noise/+bug/1181823&quot; rel=&quot;nofollow noreferrer&quot;&gt;There is a bug&lt;/a&gt; that could be related to this issue... If you are stuck though do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an instant fix, close the app, then you can delete the entire database in ~/.local/share/noise/&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/.local/share/noise/database* &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then relaunch and it should re-scan&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-14T11:50:10.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10709" PostTypeId="2" ParentId="10063" CreationDate="2017-02-14T11:59:50.663" Score="1" Body="&lt;p&gt;this is a very specific question, and you should really direct it to Reaper / Wine / Linux music production forums instead. To get you started though, there is a similar question, with some suggestions that should work:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1375751&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=1375751&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also read that a Native Linux port of Reaper has been created and might also help solve your problems:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.phoronix.com/forums/forum/phoronix/general-discussion/868977-native-linux-build-of-the-digital-audio-workstation-reaper-5-20-beta-10-available&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.phoronix.com/forums/forum/phoronix/general-discussion/868977-native-linux-build-of-the-digital-audio-workstation-reaper-5-20-beta-10-available&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-02-14T11:59:50.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10710" PostTypeId="1" AcceptedAnswerId="10711" CreationDate="2017-02-14T12:51:59.647" Score="0" ViewCount="401" Body="&lt;p&gt;elementary is all about ease of use and aesthetics. As a mac user, I'm incredibly delighted to have finally stumbled upon such linux distro.&#xA;A huge turn-off at the beginning was the horrible pointer movement through touchpads, though. Something so simple and crucial to the user, which is often overlooked. It's not just that the sensitivity is way too high by default, also the acceleration is generally broken and gesture recognition unreliable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some research I could fix all these issues by simply updating libinput to the latest version 1.6. Elementary still has 1.2.x in its repos, which was incredibly improved over time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So why not simply including a more recent libinput by default in loki? It's simple, it would be amazing for many new users and I don't see any drawbacks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Moritz&lt;/p&gt;&#xA;" OwnerUserId="8601" LastActivityDate="2017-02-14T14:40:34.983" Title="Add latest libinput to Elementary" Tags="|updates|touchpad|" AnswerCount="1" CommentCount="0" ClosedDate="2017-02-19T20:41:19.973" ContentLicense="CC BY-SA 3.0" />
  <row Id="10711" PostTypeId="2" ParentId="10710" CreationDate="2017-02-14T13:37:24.307" Score="0" Body="&lt;p&gt;Loki is based on Ubuntu 16.04. It's dependent upon that for its software release versions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is also a possible repeat of this thread:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10205/update-libinput-driver&quot;&gt;Update libinput driver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-14T14:40:34.983" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10712" PostTypeId="2" ParentId="10627" CreationDate="2017-02-14T17:03:46.663" Score="0" Body="&lt;p&gt;Thunderbird with the Exquilla add-on lets me read mail from Office365 exchange servers. I do not know the status of calendar support; I believe that it is &lt;em&gt;possible&lt;/em&gt; but not trivial. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.mozilla.org/en-US/thunderbird/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.mozilla.org/en-US/thunderbird/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://exquilla.zendesk.com/hc/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://exquilla.zendesk.com/hc/en-us&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8603" LastActivityDate="2017-02-14T17:03:46.663" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10713" PostTypeId="2" ParentId="4844" CreationDate="2017-02-14T19:16:46.260" Score="1" Body="&lt;p&gt;Is it possible to cycle ONLY between windows of the same application when other windows are open &lt;em&gt;in the same workspace&lt;/em&gt;?&lt;/p&gt;&#xA;&lt;h3&gt;I think the answer is NO.&lt;/h3&gt;&#xA;&lt;p&gt;I cannot confirm the other answer that was also marked as definitive.&lt;/p&gt;&#xA;&lt;p&gt;Because it doesn't work, other questions (&lt;a href=&quot;https://elementaryos.stackexchange.com/q/10394/170&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10705/170&quot;&gt;here&lt;/a&gt;) asking for an answer are marked or can be marked as duplicate of the present question.&lt;/p&gt;&#xA;&lt;p&gt;At the same time the present question can be marked as duplicate of this one: &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1441/170&quot;&gt;What are the different methods to switch between windows and workspaces?&lt;/a&gt;, which specifically mentions at its first point: &lt;code&gt;windows of the same application on the same workspace&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;But that point is not mentioned by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/45/daniel-for%C3%A9&quot;&gt;Daniel&lt;/a&gt; Foré's authoritative &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1479/170&quot;&gt;answer&lt;/a&gt;, which makes me think that in fact the answer to the question &lt;em&gt;&lt;strong&gt;&amp;quot;how it is possible to cycle exclusevely between windows of the same application&amp;quot;&lt;/strong&gt;&lt;/em&gt; is that &amp;quot;it's not possible&amp;quot;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;The absence of this option is probably due to the presence of others - as indicated in  &lt;a href=&quot;https://elementaryos.stackexchange.com/users/45/daniel-for%C3%A9&quot;&gt;Daniel Foré's answer&lt;/a&gt; - which achieve the same goal.&lt;/p&gt;&#xA;&lt;p&gt;The way the Pantheon desktop uses workspaces is very intelligent. There is no new empty workspace, and any fullscreen window (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt;) gets its own workspace.&lt;/p&gt;&#xA;&lt;p&gt;To achieve the goal: &lt;strong&gt;open the multi-window application (and only that) in its own workspace and then switch windows there with &lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/strong&gt; If you need more than one multi-window application, use separate workspaces for each app, and switch between apps by switching workspaces (&lt;kbd&gt;Super-&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;).&#xA;To create new workspaces for windows as said before, just make fullscreen window (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt;) or use the shortkey that shows workspaces (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;S&lt;/kbd&gt;, &lt;kbd&gt;Super&lt;/kbd&gt;,&lt;kbd&gt;DownArrow&lt;/kbd&gt;) - those can be customized) and drop the windows of your application onto the &lt;strong&gt;+&lt;/strong&gt; button to add new workspace.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XdpMe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XdpMe.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-16T12:19:35.730" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10715" PostTypeId="2" ParentId="4174" CreationDate="2017-02-14T21:57:01.267" Score="2" Body="&lt;p&gt;I agree this would a be a must-have feature for elementary OS, but in the meantime I use &lt;strong&gt;Evolution app&lt;/strong&gt; to manage my email and it has a built-in feature to manage addresses books (due to gnome-contacts, which uses evolution-data-server). So I recommend you to use it instead of pantheon mail until elementary develops its own address book. &lt;/p&gt;&#xA;" OwnerUserId="8606" LastEditorUserId="7532" LastEditDate="2017-04-17T14:55:15.447" LastActivityDate="2017-04-17T14:55:15.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10717" PostTypeId="2" ParentId="2908" CreationDate="2017-02-15T07:40:47.957" Score="6" Body="&lt;p&gt;The keys to do this in Loki are &lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Super&lt;/kbd&gt; &lt;kbd&gt;Left&lt;/kbd&gt;/&lt;kbd&gt;Right&lt;/kbd&gt;. &lt;/p&gt;&#xA;" OwnerUserId="7118" LastActivityDate="2017-02-15T07:40:47.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10718" PostTypeId="1" CreationDate="2017-02-15T08:09:16.340" Score="0" ViewCount="842" Body="&lt;p&gt;I'm curious if there are any known issues? And how does it handle flipping into tablet mode, etc?&lt;/p&gt;&#xA;" OwnerUserId="7118" LastEditorUserId="578" LastEditDate="2017-02-15T10:50:11.513" LastActivityDate="2017-04-20T17:34:17.140" Title="Has anyone installed elementary OS on the Lenovo Yoga 910 yet?" Tags="|lenovo|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10720" PostTypeId="2" ParentId="10718" CreationDate="2017-02-15T10:23:56.610" Score="0" Body="&lt;p&gt;&lt;strong&gt;Auto rotate not working&lt;/strong&gt;, as was mentioned on Lenovo forum, everything else should work well, after install try &lt;strong&gt;update linux kernel&lt;/strong&gt; to latest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just guessing, nothing easier then install and try on your own.&lt;/p&gt;&#xA;" OwnerUserId="4943" LastActivityDate="2017-02-15T10:23:56.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10721" PostTypeId="2" ParentId="10394" CreationDate="2017-02-15T10:48:36.093" Score="1" Body="&lt;p&gt;I think there is &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10713/170&quot;&gt;no such specific shortkey&lt;/a&gt; - but it might not be needed if you consider &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1479/170&quot;&gt;the range of options available&lt;/a&gt; without trying to get exactly what you know on other desktops.&lt;/p&gt;&#xA;&lt;h3&gt;Especially considering the workflow:&lt;/h3&gt;&#xA;&lt;p&gt;I think Pantheon workspaces are rather intelligent in that there is no new empty workspace and any fullscreen window can get its own workspace (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt;); use the shortkey that shows workspaces (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;S&lt;/kbd&gt;, &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;DownArrow&lt;/kbd&gt;, those can be customized) and there you can drop windows of the same application onto the empty desktop (the &lt;strong&gt;+&lt;/strong&gt; button) to have a separate workspace for them.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GneNy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GneNy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You achieve the main purpose if you &lt;strong&gt;use the multi-window application (and only that) in its own workspace and then switch windows there with &lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/strong&gt; If you need more than one multi-window application, use separate workspaces for each app, and switch between apps by switching workspaces (&lt;kbd&gt;Super-&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;).&lt;/p&gt;&#xA;&lt;p&gt;The quickest way for me is this: starting first window of my application, then &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; to get a new workspace, and any new window of that app will stay in that particular workspace; if I need a new multi-window app, start the app, &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; again to get a separate workspace for that and then open the second window etc. If the fullscreen window is taken out of fullscreen (again &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt;) it might go to the previous workspace but it can be easily moved as desired either by going to the workspace switcher (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;S&lt;/kbd&gt;, &lt;kbd&gt;Super&lt;/kbd&gt;,&lt;kbd&gt;DownArrow&lt;/kbd&gt;) or by using the shortkeys that move windows between workspaces.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h3&gt;Is it better?&lt;/h3&gt;&#xA;&lt;p&gt;This may seem complicated at first, but in fact it may prove easier than what you ask: if you had the shortkey that you mention and you used more than one multi-window applications (let's say Libreoffice Writer and Evince), that shortkey would only work for the selected application; to go from LOWriter to Evince you would either use the mouse or set separate workspaces for the different apps in the first place, in which case your ubuntu shortkey is useless.&lt;/p&gt;&#xA;&lt;p&gt;I think this is just a matter of using workspaces or not.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-16T12:08:23.133" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10722" PostTypeId="2" ParentId="1441" CreationDate="2017-02-15T11:07:30.487" Score="1" Body="&lt;p&gt;As a complement to the main answer in order to address the first point of the question (&lt;code&gt;switch between windows of the same application on the same workspace&lt;/code&gt;) which was also asked as separate questions (&lt;a href=&quot;https://elementaryos.stackexchange.com/q/10394/170&quot;&gt;here&lt;/a&gt;,  &lt;a href=&quot;https://elementaryos.stackexchange.com/q/4844/170&quot;&gt;here&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10705/170&quot;&gt;here&lt;/a&gt;) that tend to be duplicate without getting a clear answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no such keyboard shortcut, but it might not be needed. If the multiple windows of the same application are on the same workspace, the goal is achieved with the shortcut for switching windows of the same workspace (&lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;) &lt;strong&gt;if only that (multi-window) application is using the workspace&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general idea is to &lt;strong&gt;open the multi-window application (and only that) in its own workspace and then switch windows there with &lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GneNy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GneNy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need more than one multi-window application, use separate workspaces for each app, and switch between apps by switching workspaces (&lt;kbd&gt;Super-&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To manage the different windows &amp;amp; workspaces, go to the Workspace Switcher (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;S&lt;/kbd&gt;, &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;DownArrow&lt;/kbd&gt;, keys can be customized) and there you can add new workspace and drag&amp;amp;drop windows between workspaces. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note also that any window that is made fullscreen with &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; gets a new workspace for itself.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-17T14:58:13.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10724" PostTypeId="1" CreationDate="2017-02-15T12:15:38.737" Score="1" ViewCount="834" Body="&lt;p&gt;Recently I have done &lt;strong&gt;Elementary Loki&lt;/strong&gt; installation. I feel, screen little bit shaking for every action/windows opening time. &#xA;I am facing the same issue while playing any video. while playing the videos its struck frequently. I have already installed graphics driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And what are the mandatory things I should do after the fresh installation of OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody help me on this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in Advance&#xA;Vinoth&lt;/p&gt;&#xA;" OwnerUserId="8614" LastActivityDate="2017-02-15T19:09:11.473" Title="Graphics driver problem in loki" Tags="|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10725" PostTypeId="1" CreationDate="2017-02-15T12:19:21.650" Score="1" ViewCount="60" Body="&lt;p&gt;I am using an HP Probook 430G, where the touchpad just freezes, after a certain point, say 3-5 minutes of usage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is nothing in the &lt;code&gt;dmesg&lt;/code&gt;. Here is my &lt;code&gt;xinput&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ SynPS/2 Synaptics TouchPad                id=10   [slave  pointer  (2)]&#xA;⎜   ↳ PixArt Microsoft USB Optical Mouse        id=14   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ AT Raw Set 2 keyboard                     id=9    [slave  keyboard (3)]&#xA;    ↳ HP WMI hotkeys                            id=11   [slave  keyboard (3)]&#xA;    ↳ HP Wireless hotkeys                       id=12   [slave  keyboard (3)]&#xA;    ↳ HP HD Camera                              id=13   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When connected to the mouse, it works just fine. Only touchpad is an issue.&lt;/p&gt;&#xA;" OwnerUserId="8557" LastActivityDate="2017-02-15T12:19:21.650" Title="Touchpad just freezes after some time" Tags="|release-loki|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10726" PostTypeId="1" CreationDate="2017-02-15T13:22:07.347" Score="8" ViewCount="2361" Body="&lt;p&gt;When I turn on my notebook, I put the password and it comes in, the startup icons do not appear, it takes a few minutes, it never happened.&#xA;How can I solve this problem? 100% updated version elementary OS 0.4 Loki (64-bit)&lt;/p&gt;&#xA;" OwnerUserId="8616" LastActivityDate="2018-01-03T18:40:51.580" Title="Delay to Start Elementary OS 0.4 Loki (64-bit)" Tags="|updates|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10727" PostTypeId="2" ParentId="10726" CreationDate="2017-02-15T13:51:20.433" Score="7" Body="&lt;p&gt;This is a known bug: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the workaround: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7897/significant-lag-loading-panel-and-dock-after-login-loki&quot;&gt;Significant lag loading panel and dock after login (Loki)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-26T01:07:00.523" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10728" PostTypeId="2" ParentId="10691" CreationDate="2017-02-15T14:03:53.020" Score="1" Body="&lt;p&gt;It might be related to your StartupWMClass. In the terminal run xprop WM_CLASS and then click the Minecraft window. Use the value it returns. I ran into the same issue when I created a custom .desktop file for an android emulator and it worked.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-15T15:24:08.540" LastActivityDate="2017-02-15T15:24:08.540" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10729" PostTypeId="1" CreationDate="2017-02-15T16:50:21.537" Score="3" ViewCount="619" Body="&lt;p&gt;I've installed elementary OS Loki on my Lenovo G580 laptop and I'm very happy with it, but there's a one problem.&#xA;In elementary OS Freya (and any other Linux distros I've ever used) I used to send files (usually pictures) from phone (Samsung Galaxy S3 mini) to the laptop via Bluetooth.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It needed to tick specific option in &lt;code&gt;gnome-file-share-properties&lt;/code&gt;, but it works after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But in Loki, it just doesn't work. I've enabled files receiving via Bluetooth in System settings -&gt; Sharing and in the &lt;code&gt;gnome-file-share-properties&lt;/code&gt;, but if I try to send file from phone, it fails (but elementary OS knows that I'm trying to send something, because there is a small white dot at the bottom right corner of wingpanel's Bluetooth icon).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Phone and laptop are paired and I am able to send files from laptop to phone using &quot;Send files via Bluetooth&quot; option in file manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know what should I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x6sN7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x6sN7.png&quot; alt=&quot;My System settings -&amp;gt; Sharing&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/7Ykpp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7Ykpp.png&quot; alt=&quot;Settings in gnome-file-share-properties&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8620" LastActivityDate="2020-11-10T20:13:06.553" Title="Sending files from phone to notebook via Bluetooth" Tags="|files|bluetooth|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10731" PostTypeId="2" ParentId="7924" CreationDate="2017-02-15T18:20:27.763" Score="3" Body="&lt;p&gt;Answer pulled from here: &lt;a href=&quot;https://askubuntu.com/questions/470040/how-to-customize-or-debug-ad-blocking-on-gnome-web-epiphany-browser&quot;&gt;https://askubuntu.com/questions/470040/how-to-customize-or-debug-ad-blocking-on-gnome-web-epiphany-browser&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gnome-web blocks ads on the basis of the URI of the element. The blocking is      &#xA;done by the UriTester componant (source code). Like Adblock plus, the tester   &#xA;loads a list of patterns from a list, and determine if a URI is an ad if it &#xA;matches one of the pattern.&#xA;&#xA;&#xA;The file $HOME_DIR/.config/epiphany/adblock/filters.list contains the &#xA;locations of the lists to load (one on each line). If this file doesn't &#xA;exists (e.g. first time you run epiphany), it defaults to &quot;https://easylist-&#xA;downloads.adblockplus.org/easylist.txt&quot;. Gnome-web then download (and &#xA;periodically refresh) the pattern lists, and store them in the same &#xA;directory (with file name like bedc7ed868397c3dcaf6bc40ed9bbf70)&#xA;&#xA;So, in case of troubles, check that you have filters.list, with one line &#xA;pointing to a valid adblock+ filter, and one file with a file name of 32 hex &#xA;chars, containing valid blocking pattern. If the file filters.list exists, &#xA;but is empty, ads won't be filtered at all.&#xA;&#xA;&#xA;It is also possible to customize the list used by changing the url in &#xA;filter.list (for instance replacing the default list with a localised list &#xA;like https://easylist-downloads.adblockplus.org/liste_fr+easylist.txt).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-15T18:20:27.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10732" PostTypeId="2" ParentId="10718" CreationDate="2017-02-15T18:25:44.687" Score="0" Body="&lt;p&gt;I'm going to answer my own question as I make progress. So far no luck, the installer can't find the hard drive and even booting into Live mode, it has no driver for the Qualcomm Atheros wireless card so you'll have no wifi. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Related forums:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lenovo is releasing new BIOS's for some machines that allows you to install Linux, but they don't have one for the 910 yet:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://forums.lenovo.com/t5/Linux-Discussion/Installing-Ubuntu-16-04-on-Yoga-900S/m-p/3466862#M8629&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.lenovo.com/t5/Linux-Discussion/Installing-Ubuntu-16-04-on-Yoga-900S/m-p/3466862#M8629&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-900-and-Ideapad-710S-Linux-Only-BIOS/tac-p/3574443#M388&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-900-and-Ideapad-710S-Linux-Only-BIOS/tac-p/3574443#M388&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To be continued...&lt;/p&gt;&#xA;" OwnerUserId="7118" LastActivityDate="2017-02-15T18:25:44.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10734" PostTypeId="2" ParentId="10680" CreationDate="2017-02-15T19:02:49.357" Score="4" Body="&lt;p&gt;&lt;strong&gt;Scratch&lt;/strong&gt; is developed in Vala, so you have at least two ways to create a plugin for a vala application:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;code&gt;Glib.Module&lt;/code&gt; class from &lt;em&gt;gmodule-2.0&lt;/em&gt; library to develop it. You can find more info at:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://valadoc.org/gmodule-2.0/GLib.Module.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Valadoc : Glib.Module&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/TypeModules&quot; rel=&quot;nofollow noreferrer&quot;&gt;TypeModules at gnome.org&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;However, there is other way, used by Scratch, to add plugins: You can use &lt;em&gt;libpeas-1.0&lt;/em&gt; library. You can find more info at:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://valadoc.org/libpeas-1.0/Peas.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Valadoc : libpeas-1.0&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Also, you can take a look at Scratch plugin-manager code:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/scratch/scratch/view/head:/src/Services/PluginManager.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad : Scratch&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And finally, a simple tutorial about how to develop a plugin for a vala program:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://steef435.github.io/2016/01/20/getting-started-with-libpeas-extensions-in-vala/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Getting Started with Libpeas Extensions in Vala&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I hope these readings will help you with your question. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-02-15T19:02:49.357" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10735" PostTypeId="2" ParentId="10724" CreationDate="2017-02-15T19:09:11.473" Score="1" Body="&lt;p&gt;Nothing mandatory per sé, however google for &quot;things to do after installing elementary&quot; to get some useful tips on what to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regarding graphics driver I'd recommend to install and test out different (compatible) versions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app called &quot;Additional Drivers&quot; is nice for seeing all installed drivers and selecting one of them to use. You can get it from the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep in mind though that fiddling with graphics drivers is always a bit risky, make sure your data is backed up.&lt;/p&gt;&#xA;" OwnerUserId="8601" LastActivityDate="2017-02-15T19:09:11.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10736" PostTypeId="1" CreationDate="2017-02-15T19:11:50.477" Score="1" ViewCount="2241" Body="&lt;p&gt;I changed my os from Ubuntu 16.10 to elementary OS and it's good but I have problems to use remmina on elementary. I try to connect to other servers using RDP but in the scrren appear the message that &quot;Protocol Plugin RDP isn't installed&quot;.&lt;/p&gt;&#xA;" OwnerUserId="8623" LastEditorUserId="578" LastEditDate="2017-02-16T05:40:55.740" LastActivityDate="2017-02-16T05:40:55.740" Title="How to install Remmina RDP Plugin?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10738" PostTypeId="2" ParentId="9123" CreationDate="2017-02-15T21:49:14.517" Score="0" Body="&lt;p&gt;You can use rEFInd, but don't have to. I simply installed elementary alongside my mac OS on a separate partition without.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary then installs GRUB and boots by default, however one can hold down the OPTION button upon startup and choose mac OS instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So while rEFInd is not necessary (and I like to keep things vanilla), it will give you advantages regarding configuration and speed (timeouts). &lt;/p&gt;&#xA;" OwnerUserId="8601" LastActivityDate="2017-02-15T21:49:14.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10740" PostTypeId="2" ParentId="9795" CreationDate="2017-02-15T22:10:49.017" Score="0" Body="&lt;p&gt;I'm facing the same problem with the AppCenter, the updates page is blank nothing is shown, none of the apps installed, neither updates.&#xA;I usually update the system through AppCenter, I remember that this problem began to occur after I ran the sudo apt autoremove command that theoretically would remove packages that are no longer used, but it seems that&#xA;Removed more than it should. Older kernels were removed and with that the Nvidia driver stopped working, I had to reinstall it. I can update the system normally from the command line, no problem.&#xA;To install applications I have to use the command line also since in App Center it just keeps waiting ... and does not install the application, &lt;code&gt;sudo apt list --upgradable&lt;/code&gt; normally lists packages that can be updated&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I've done to try to fix the problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - &lt;code&gt;sudo apt-get purge appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - &lt;code&gt;sudo apt-get purge packagekit&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 - Restart, reinstall, unsuccessful&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 - I removed any other software source I could find&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5 - Restart, unsuccessful&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6 - Follow the procedures on the links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8141/empty-appcenter&quot;&gt;Empty AppCenter&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7533/no-software-is-shown-in-appcenter-except-what-is-installed&quot;&gt;No software is shown in AppCenter except what is installed&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9795/loki-appcentre-updates-page-blank-cant-do-1-update&quot;&gt;Loki AppCentre updates page blank, can&amp;#39;t do 1 update&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7420/i-cant-find-firefox-in-the-appcenter-of-loki-although-i-have-installed-it/7450#7450&quot;&gt;I can&amp;#39;t find FireFox in the AppCenter of Loki, although I have installed it&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also unsuccessfully, do you have any idea how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="6213" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-18T11:37:22.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10741" PostTypeId="2" ParentId="10736" CreationDate="2017-02-15T22:55:16.997" Score="2" Body="&lt;p&gt;for me &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install remmina-plugin-rdp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;worked fine!&lt;/p&gt;&#xA;" OwnerUserId="8625" LastActivityDate="2017-02-15T22:55:16.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10742" PostTypeId="1" CreationDate="2017-02-15T23:24:52.843" Score="1" ViewCount="1424" Body="&lt;p&gt;I was playing around with the color schemes in the terminal and now I'd like to set it all back to the default including the background transparency which seems to no longer be working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried uninstalling an reinstalling through app center and purging through the xterm &quot;sudo apt purge pantheon-terminal&quot; then reinstalling &quot;sudo apt install pantheon-terminal&quot;. But the color scheme remains. There must be a config file that stays even after it's removed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice?&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-02T02:39:48.543" Title="Revert to default color scheme in Pantheon-Terminal" Tags="|pantheon-terminal|color|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10743" PostTypeId="1" AcceptedAnswerId="10755" CreationDate="2017-02-15T23:36:48.143" Score="2" ViewCount="330" Body="&lt;p&gt;I'm trying to enable debug in appcenter to figure out why mine has the updates page empty. I saw the option -d in App Center from command line, but where the debug logs are saved?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6213" LastActivityDate="2017-02-16T17:16:23.867" Title="Is there a way to debug AppCenter? if yes where are the logs?" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10744" PostTypeId="1" CreationDate="2017-02-16T02:26:52.477" Score="1" ViewCount="63" Body="&lt;p&gt;I have a successful wifi connection, yet the top bar is showing a network icon with an x on it (presumably indicating a bad network connection). I assume the cause is the two virtualbox networks I have. Is there maybe a way I can simply reorder things so the wireless network is first?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/O3osf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O3osf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm thinking the ideal setup would be that these devices are not displayed at all by the Network Manager applet since they are unmanaged by Network Manager:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DEVICE    TYPE      STATE      CONNECTION &#xA;wlp4s0    wifi      connected  AndroidAP  &#xA;vboxnet0  ethernet  unmanaged  --         &#xA;vboxnet1  ethernet  unmanaged  --         &#xA;lo        loopback  unmanaged  --&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lo&lt;/code&gt; is not listed, so why are the VirtualBox networks listed?&lt;/p&gt;&#xA;" OwnerUserId="8570" LastEditorUserId="8570" LastEditDate="2017-02-16T02:53:59.487" LastActivityDate="2017-02-16T02:53:59.487" Title="How to make sure the wireless network is the network whose status is used for the top bar" Tags="|wifi|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10745" PostTypeId="1" CreationDate="2017-02-16T04:58:03.963" Score="1" ViewCount="3036" Body="&lt;p&gt;I have installed Loki with update on the go when installing but when restart can't load into OS, can't show the splash just like typing but nothing to do. I have installed dual boot with Windows10 and installed grub in sda5. How to fix it? Please help me???&lt;img src=&quot;https://i.stack.imgur.com/AARW8.jpg&quot; alt=&quot;boot error&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="8628" LastActivityDate="2018-01-11T04:59:23.433" Title="Can't start/boot Elementry OS loki after fresh install" Tags="|release-loki|boot|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10746" PostTypeId="1" CreationDate="2017-02-16T06:17:28.583" Score="1" ViewCount="277" Body="&lt;p&gt;With kernel vmlinuz-4.4.0-62-generic firefox don't play html5 videos on youtube, boot with 4.4.0-59-generic play ok. help?&lt;/p&gt;&#xA;" OwnerUserId="8631" LastActivityDate="2017-02-16T06:17:28.583" Title="Firefox don't play html5 videos on youtube" Tags="|release-loki|kernel|64-bit|" AnswerCount="0" CommentCount="2" ClosedDate="2017-02-19T20:41:08.790" ContentLicense="CC BY-SA 3.0" />
  <row Id="10747" PostTypeId="2" ParentId="10742" CreationDate="2017-02-16T07:03:00.847" Score="3" Body="&lt;p&gt;You can reset terminal palette to default with &lt;code&gt;dconf&lt;/code&gt; or via the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.settings palette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To set background transparency you can change the &lt;code&gt;background&lt;/code&gt; key at the same path. Its last value is between 1 (no transparency) and 0 (full transparency)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/277/where-are-dircolors-defined-for-pantheon-terminal?rq=1&quot;&gt;Where are dircolors defined for pantheon terminal?&lt;/a&gt; as well&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-01T12:18:13.440" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10748" PostTypeId="2" ParentId="10745" CreationDate="2017-02-16T11:19:40.877" Score="1" Body="&lt;p&gt;Seems more like a boot loader issue. Grub should be installed on /dev/sda&#xA;Try the following&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a bootable disk with Supergrub &lt;a href=&quot;http://www.supergrubdisk.org/category/download/supergrub2diskdownload/super-grub2-disk-stable/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; using WinISO or PowerISO or any similar software in your USB stick.&lt;/li&gt;&#xA;&lt;li&gt;Boot the Supergrub from USB. Supergrup auto-detects all the OS installed on  your disks. Select the corresponding volume where elementary OS is installed.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run the following commands in your elementary OS terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo grub-install /dev/sda&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="8633" LastEditorUserId="578" LastEditDate="2017-02-16T16:32:58.813" LastActivityDate="2017-02-16T16:32:58.813" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10752" PostTypeId="1" CreationDate="2017-02-16T14:39:39.117" Score="2" ViewCount="1574" Body="&lt;p&gt;I have a couple of apps installed via flatpak but their &lt;code&gt;.desktop&lt;/code&gt; app launchers' location isn't included to be scanned and added to the Applications menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to include them to the path being scanned instead of manually copying the app launchers to &lt;code&gt;/usr/share/applications&lt;/code&gt; or &lt;code&gt;~/.local/share/applications&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="686" LastEditorUserId="686" LastEditDate="2017-02-16T14:45:43.747" LastActivityDate="2017-02-16T16:46:15.890" Title="Any way to include flatpak .desktop files to the ones scanned by the Applications menu?" Tags="|release-loki|app-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10754" PostTypeId="2" ParentId="10752" CreationDate="2017-02-16T16:46:15.890" Score="2" Body="&lt;p&gt;I haven't confirmed this, but elementary OS probably adheres to the standards defined by Freedesktop.org.  If this is the case, you can append your special path to one of the environment variables in the &lt;a href=&quot;http://standards.freedesktop.org/basedir-spec/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;XDG Base Directory Specification&lt;/a&gt;. The environment variable you want to append is probably &lt;a href=&quot;https://specifications.freedesktop.org/basedir-spec/latest/ar01s03.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;$XDG_DATA_DIRS&lt;/a&gt;.  Use a colon ':' to separate paths in the variable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure how to force a refresh after this.  Maybe try a reboot, or google for an answer.&lt;/p&gt;&#xA;" OwnerUserId="8457" LastActivityDate="2017-02-16T16:46:15.890" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10755" PostTypeId="2" ParentId="10743" CreationDate="2017-02-16T17:16:23.867" Score="2" Body="&lt;p&gt;AppCenter is always ran on startup with a &quot;silent&quot; argument (&lt;code&gt;appcenter --silent&lt;/code&gt;) which makes it not show the window, silently load the database and update the cache to e.g: show the notification to the user that there are updates available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you're launching appcenter from command line when a silent instance is already running, you are simply invoking the &lt;code&gt;GLib.Application.activate ()&lt;/code&gt; method on the existing instance which is not really what you want in this case. &#xA;See: &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/appcenter/appcenter/view/head:/src/Application.vala#L97&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://bazaar.launchpad.net/~elementary-apps/appcenter/appcenter/view/head:/src/Application.vala#L97&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You can just kill the current instance with &lt;code&gt;killall appcenter&lt;/code&gt; and start debugging it with &lt;code&gt;appcenter -d&lt;/code&gt;, &lt;code&gt;gdb appcenter&lt;/code&gt; or whatever you are using to do so.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="553" LastActivityDate="2017-02-16T17:16:23.867" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10756" PostTypeId="1" AcceptedAnswerId="10766" CreationDate="2017-02-16T17:31:05.637" Score="0" ViewCount="759" Body="&lt;p&gt;I am trying to install elementary OS inside an external HDD, so I can take it with me anywhere and use it any time I need it. I have done many Linux installations before on this HDD, but using the whole memory. What I need now is to install it only in a small part.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I mean, there exists two well differentiated formatted partitions inside it, one with 650GB which I want for common storage purposes (like a normal pen drive), and another one with 100GB where I want elementary OS to be installed, totally separated from the other 650GB. The problem is that when elementary OS asks me where to install everything, it does not let me to do it on the correct partition...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It shows sda disk (Mac OSX), sdb, sdc (the HDD), and inside it, sdd1, sdd2 (650GB partition) and sdd3 (100 GB partition)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2V2VT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2V2VT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I solve this? And what should I choose where it asks for where to install the bootloader so I can boot it from any PC?&lt;/p&gt;&#xA;" OwnerUserId="8640" LastEditorUserId="308" LastEditDate="2018-08-07T17:04:30.860" LastActivityDate="2018-08-07T17:04:30.860" Title="How can I install elementary OS in a partition of an external HDD?" Tags="|system-installation|boot|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10757" PostTypeId="2" ParentId="10756" CreationDate="2017-02-16T17:43:18.343" Score="1" Body="&lt;p&gt;You should install to the MBR of your external disk drive, which is &lt;code&gt;/dev/sdd&lt;/code&gt; in your case. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way you can boot from your external disk after you have selected it from a one-time boot menu.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-16T17:43:18.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10759" PostTypeId="2" ParentId="7222" CreationDate="2017-02-16T19:15:13.380" Score="1" Body="&lt;p&gt;I found a way to fix it! You only need to edit the informations of all your m4a songs and delete the year and the compositors!&#xA;It's a nuisance, but it worked for me... hope it helps!&lt;/p&gt;&#xA;" OwnerUserId="8641" LastActivityDate="2017-02-16T19:15:13.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10760" PostTypeId="1" AcceptedAnswerId="10762" CreationDate="2017-02-16T19:34:23.447" Score="4" ViewCount="157" Body="&lt;p&gt;Whenever AppCenter tells me there are &quot;Operating System Updates&quot; available, I'm curious to know what is contained in the updates but when I tap on the item, the dialog that pops up is woefully lacking in information (screenshot attached)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vk4Gw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vk4Gw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get more info?&lt;/p&gt;&#xA;" OwnerUserId="8570" LastActivityDate="2017-08-15T16:33:03.820" Title="Is there a way to get more detail about what changes are in &quot;Operating System Updates&quot;?" Tags="|updates|appcenter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10761" PostTypeId="2" ParentId="10760" CreationDate="2017-02-16T20:28:15.463" Score="0" Body="&lt;p&gt;I think your only alternative is to use the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doing &lt;code&gt;sudo apt upgrade&lt;/code&gt; will list all the packages that are going to be upgraded. Then, you can press n if you don't want to upgrade them or y if you want to.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Note: This will list all packages that are going to be upgraded. Not only the Operating System Updates.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-16T20:28:15.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10762" PostTypeId="2" ParentId="10760" CreationDate="2017-02-16T20:30:00.957" Score="3" Body="&lt;p&gt;apt list --upgradable  will show you what it's upgrading along with versions&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-16T20:30:00.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10763" PostTypeId="1" CreationDate="2017-02-17T00:16:48.957" Score="2" ViewCount="22691" Body="&lt;p&gt;I have a pair of Ghostek soDrop 2 headphones. They're Bluetooth-compatible with a built-in microphone and the ability to make calls if connected to a phone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I paired them with my Linux computer, which has elementaryOS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the audio quality is ABYSMAL. It's not a glitchy/stuttering kind of bad audio quality; it sounds like you're making a phone call. (Phone call quality is not how I want to listen to music.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A little research (&lt;a href=&quot;https://superuser.com/questions/724018/bad-sound-through-bluetooth-headphones&quot;&gt;https://superuser.com/questions/724018/bad-sound-through-bluetooth-headphones&lt;/a&gt;) shows that this may have to do with the fact that, since the headphones can answer phone calls, it has a second audio profile that has a lower call quality for those phone calls. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking at the list of connected devices in the Bluetooth menu seems to confirm this two-driver theory, since my headphones appear twice. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/T42uj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/T42uj.png&quot; alt=&quot;It appears twice&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now it's just a matter of disabling this second audio profile on my computer, which, according to the post in the link above, has to do with disabling a feature called Handsfree Telephony.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that the Bluetooth settings has practically no way to do this, let alone change ANY settings for my Bluetooth headphones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/10i7m.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/10i7m.png&quot; alt=&quot;No bluetooth settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attempting to disconnect only one of the two profiles from the Bluetooth dropdown menu (see first screenshot) doesn't work either, since disconnecting one disconnects both, no matter if you pick the first or second one in the list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="8357" LastEditorUserId="-1" LastEditDate="2017-03-20T10:18:34.663" LastActivityDate="2020-07-02T19:40:23.030" Title="Fix bad quality audio in Bluetooth headphones" Tags="|settings|sound|bluetooth|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10764" PostTypeId="2" ParentId="10763" CreationDate="2017-02-17T00:16:48.957" Score="4" Body="&lt;p&gt;&lt;em&gt;Funnily enough, I found the answer while writing this post, so I might as well write my first-ever Q&amp;amp;A post on StackExchange.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You have to go to Sound Settings and under the options for your Bluetooth headphones, switch the Mode to High Fidelity Playback (or whatever other option there is.)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JyvVz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JyvVz.png&quot; alt=&quot;step 1&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9zPRX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9zPRX.png&quot; alt=&quot;step 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8357" LastActivityDate="2017-02-17T00:16:48.957" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10765" PostTypeId="1" CreationDate="2017-02-17T09:02:15.463" Score="5" ViewCount="301" Body="&lt;p&gt;I see that there is 3.2 mb of data that gets downloaded every time I sign into the Internet wifi.  Can I prevent this and what is it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect it is the update from the app store because I have often tried to install upon booting, and I get an apt lock problem.  after a few minutes, no apt lock problems and sometimes I get a message that updates are available (without &lt;code&gt;doing sudo apt update&lt;/code&gt;)&#xA;Can I disable this &quot;feature&quot;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/68DCZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/68DCZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-02-17T15:19:23.037" LastActivityDate="2017-04-29T09:07:46.577" Title="Why is there download of data automatically" Tags="|appcenter|" AnswerCount="1" CommentCount="17" ContentLicense="CC BY-SA 3.0" />
  <row Id="10766" PostTypeId="2" ParentId="10756" CreationDate="2017-02-17T10:07:00.427" Score="0" Body="&lt;p&gt;Letting the installer to &quot;decide and install everything&quot; means it will also do the partitioning for the &lt;strong&gt;whole physical drive&lt;/strong&gt;. You can simply manually &lt;em&gt;&quot;install everything&quot;&lt;/em&gt; on &lt;code&gt;sdd3&lt;/code&gt; (the 100GB partition) by making it the &lt;code&gt;/&lt;/code&gt; partition and not create a swap partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Though for that setup, I recommend repartitioning the single 100GB partition into three separate partitions with 4GB for swap, 48GB for &lt;code&gt;/&lt;/code&gt;, and the remaining 48GB for &lt;code&gt;/home&lt;/code&gt; and manually set them to their respective mount points during the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the MBR, as @lemonslice has mentioned, use the MBR for the disk drive, which is &lt;code&gt;/dev/sdd&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Source: I have the same exact external HDD setup but with 2TB of storage and more complicated partitioning (with LVMs and encryption)&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-02-17T10:07:00.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10769" PostTypeId="2" ParentId="10705" CreationDate="2017-02-17T11:08:36.417" Score="0" Body="&lt;p&gt;There is no such option that you could use with a keyboard shortcut -- and probably it will not be implemented: workspaces serve precisely the purpose of grouping windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the multiple windows of the same application are on the same workspace, the goal is achieved with the shortcut for switching windows of the same workspace (&lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;) &lt;strong&gt;if only that application is using that workspace&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general idea is to &lt;strong&gt;open the multi-window application (and only that) in its own workspace and then switch windows there with &lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to the Workspace Switcher (&lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;S&lt;/kbd&gt;, &lt;kbd&gt;Super&lt;/kbd&gt;,&lt;kbd&gt;DownArrow&lt;/kbd&gt;) and there you can add new workspace and drag&amp;amp;drop windows between workspaces; namely, drop the windows of your application onto the &lt;strong&gt;+&lt;/strong&gt; button to add to new workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GneNy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GneNy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need more than one multi-window application, use separate workspaces for each app, and switch between apps by switching workspaces (&lt;kbd&gt;Super-&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note also that any window that is made fullscreen with &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt; gets a new workspace for itself.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-17T14:57:07.690" LastActivityDate="2017-02-17T14:57:07.690" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10770" PostTypeId="2" ParentId="7104" CreationDate="2017-02-17T11:54:14.590" Score="1" Body="&lt;p&gt;We can &lt;a href=&quot;http://www.webupd8.org/2014/01/pidgin-indicator-ubuntu-appindicator.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;install Pidgin Indicator plugin&lt;/a&gt; in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPA installation instructions are provided at the linked address, but we can avoid the PPA by downloading the deb file from &lt;a href=&quot;http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu/pool/main/p/pidgin-indicator/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once installed, open Pidgin and Tools &gt; Plugins, then scroll down to &quot;Ubuntu Indicator&quot; and enable it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tcILK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tcILK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aYyUB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aYyUB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-17T13:19:06.357" LastActivityDate="2017-02-17T13:19:06.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10771" PostTypeId="2" ParentId="9688" CreationDate="2017-02-17T12:27:22.403" Score="0" Body="&lt;p&gt;This is a known bug and I saw something on the elementary Slack channel about this so I believe it is being looked at.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-17T12:27:22.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10772" PostTypeId="2" ParentId="9688" CreationDate="2017-02-17T14:01:20.250" Score="2" Body="&lt;p&gt;This bug is already fixed in trunk (the current developement branch of Scratch). &#xA;See for more details: &lt;a href=&quot;https://code.launchpad.net/~vishalrao/scratch/fix-1547327/+merge/317063&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~vishalrao/scratch/fix-1547327/+merge/317063&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing to do for you now is to wait for the new Scratch update to be released.&lt;/p&gt;&#xA;" OwnerUserId="553" LastActivityDate="2017-02-17T14:01:20.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10773" PostTypeId="2" ParentId="7224" CreationDate="2017-02-17T14:54:18.477" Score="0" Body="&lt;p&gt;Right now it works on older linuxes only.  Arch, Wheezy, etc.&lt;/p&gt;&#xA;" OwnerUserId="8647" LastActivityDate="2017-02-17T14:54:18.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10774" PostTypeId="2" ParentId="9053" CreationDate="2017-02-17T17:25:52.077" Score="2" Body="&lt;p&gt;If you select an artist or album in the column view, and start playing music from there, playback does remain confined to the list you see in the view. Unfortunately, it looks like confining playback to an arbitrary playlist just isn't an option at the moment: &lt;a href=&quot;https://bugs.launchpad.net/noise/+bug/1507047&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/noise/+bug/1507047&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regarding the queue, I tried it and thought it worked as expected. I didn't see the issue you talked about (I managed to put some songs there once but when I tried to add more songs it didn't update and showed no other songs than the first batch) I think when you look at the empty queue, the information displayed there does a good job explaining how it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DM4RN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DM4RN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8570" LastActivityDate="2017-02-17T17:25:52.077" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10775" PostTypeId="1" CreationDate="2017-02-17T17:37:47.080" Score="1" ViewCount="4659" Body="&lt;p&gt;When I try to use the command &lt;code&gt;sudo apt-get install chromium-browser&lt;/code&gt;, I get the output&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; chromium-browser : Depends: gconf-service but it is not installable&#xA;                    Depends: libgconf-2-4 (&amp;gt;= 3.2.5) but it is not installable&#xA;                    Depends: chromium-codecs-ffmpeg-extra (= 55.0.2883.87-0ubuntu0.16.04.1263) but it is not going to be installed or&#xA;                             chromium-codecs-ffmpeg (= 55.0.2883.87-0ubuntu0.16.04.1263) but it is not going to be installed&#xA;                    Recommends: chromium-browser-l10n but it is not going to be installed&#xA; elementary-tweaks-dbg : Depends: elementary-tweaks (= 1.0-0~232~ubuntu0.4.1) but it is not installable&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I use &lt;code&gt;apt-get -f install&lt;/code&gt; I get this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I try to use &lt;code&gt;sudo add-apt-repository&lt;/code&gt; I get the error &lt;code&gt;sudo: add-apt-repository: command not found&lt;/code&gt;. I've tried &lt;code&gt;sudo apt-get install software-properties-common&lt;/code&gt; but I get this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;`&#xA;`&#xA;The following packages have unmet dependencies:&#xA; software-properties-common : Depends: python3-software-properties (= 0.96.20.5) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, it appears that when I press shift, I need to press the character I tried to capitalize a second time.&lt;/p&gt;&#xA;" OwnerUserId="5968" LastEditorUserId="9" LastEditDate="2018-02-10T15:47:59.123" LastActivityDate="2018-02-10T15:47:59.123" Title="apt-get and add-apt-repository not working" Tags="|keyboard|apt|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10776" PostTypeId="2" ParentId="3815" CreationDate="2017-02-17T17:52:45.107" Score="0" Body="&lt;p&gt;if you are running Elementary OS 0.4 Loki (64-Bit) you can follow this instructions to get a working IDE and compilation routines:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the amd64 version from the official lazarus website (&lt;a href=&quot;http://www.lazarus-ide.org/index.php?page=downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.lazarus-ide.org/index.php?page=downloads&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;fpc_xxxxxx_amd64.deb&lt;/li&gt;&#xA;&lt;li&gt;fpc-src_xxxxxx_amd64.deb&lt;/li&gt;&#xA;&lt;li&gt;lazarus-project_xxxxxx_amd64.deb&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the deb packages in this order: fpc, fpc-src, lazarus&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install ./fpc_xxxxxx_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install ./fpc-src_xxxxxx_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install ./lazarus_xxxxxx_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From here, after installed the packages, the IDE should start normally(from de linux main menu or by teminal), but maybe will have issues to compile. Continue bellow to solve dependencies of compilation&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install libgdk-pixbuf2.0-dev libcairo2-dev libpango1.0-dev libatk1.0-dev libghc-x11-dev libgtk2.0-dev&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After installing the dependencies, your lazarus ide should be running and compiling fine.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2017-02-17T17:52:45.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10777" PostTypeId="2" ParentId="10775" CreationDate="2017-02-17T18:10:56.723" Score="7" Body="&lt;p&gt;Install Software Properties&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8625" LastEditorUserId="578" LastEditDate="2017-02-17T21:07:00.930" LastActivityDate="2017-02-17T21:07:00.930" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10778" PostTypeId="1" AcceptedAnswerId="10784" CreationDate="2017-02-17T18:17:05.843" Score="0" ViewCount="156" Body="&lt;p&gt;After resuming from sleep (i.e. opening the laptop lid) an otherwise empty window is on top with title &quot;...&quot; and a spinner as content. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Z9vso.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z9vso.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get rid of this?&lt;/p&gt;&#xA;" OwnerUserId="8087" LastEditorUserId="578" LastEditDate="2017-02-17T21:09:27.893" LastActivityDate="2017-02-18T09:06:46.893" Title="Empty window popping up after resume from suspend" Tags="|wifi|networking|suspend|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10779" PostTypeId="1" AcceptedAnswerId="10780" CreationDate="2017-02-17T21:23:06.113" Score="0" ViewCount="429" Body="&lt;p&gt;I installed Centrify and joined an Active Directory domain but now it just stays on the bootup screen. I'm using Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm unsure how I can reach a recovery console.&lt;/p&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="45" LastEditDate="2017-02-19T20:37:50.220" LastActivityDate="2017-02-19T20:37:50.220" Title="Stuck on Boot After Joining Microsoft Active Directory Domain" Tags="|release-loki|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10780" PostTypeId="2" ParentId="10779" CreationDate="2017-02-18T00:31:38.590" Score="2" Body="&lt;p&gt;There is a recovery mode on elementary Loki as with Ubuntu. &lt;strong&gt;The GRUB menu is just hidden during startup.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press the &lt;kbd&gt;Esc&lt;/kbd&gt; key before elementary starts to show the GRUB menu and select &quot;Advanced Options&quot;. From there, you can select the recovery console with the kernel you wanted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If all else fails, it wouldn't hurt to use a recovery disk to boot into to further diagnose your problems.&lt;/p&gt;&#xA;" OwnerUserId="686" LastEditorUserId="686" LastEditDate="2017-02-19T02:00:38.227" LastActivityDate="2017-02-19T02:00:38.227" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10782" PostTypeId="1" CreationDate="2017-02-18T06:45:32.093" Score="0" ViewCount="464" Body="&lt;p&gt;Last night, I have updated graphics driver. After the installation, system automatically restarted. After that OS is not loading. Only Black screen is coming after Elementary logo. What should i do now.? Do i need to reinstall the OS again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I am using Elementary Loki OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me on this?&lt;/p&gt;&#xA;" OwnerUserId="8614" LastActivityDate="2017-02-18T22:33:50.730" Title="System is not Booting after graphics driver installation" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10784" PostTypeId="2" ParentId="10778" CreationDate="2017-02-18T09:06:46.893" Score="2" Body="&lt;p&gt;This is not a bug.&#xA;It just checks if there is internet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a while it should print a text 'You are now connected to the internet blah blah blah...'. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's just an information for you. &lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-18T09:06:46.893" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10785" PostTypeId="1" CreationDate="2017-02-18T12:50:06.913" Score="0" ViewCount="8959" Body="&lt;p&gt;First time I'm totally lost with linux :/ I guess there must be a first time for everything! :P&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem I'm having is I cannot boot into elementary. I select it in the grub and the after the elementary logo the screen stays black. I have a windows 10 dual boot if it matters...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried recovery mode, but honestly I dont know how to fix it from the console since I dont even know what the problem is...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last thing I did was creating a folder in /etc/X11/ trying to modify the synaptics driver. After failing I removed it, but as far as I know I did it correctly, so it shouldnt be the problem. I also updated the system through the app center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help on where should I start to detect the fail?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance, I looking fordward to continue using it! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Well, it looks like I did mess it up with the synaptics driver. After booting into the terminal, I executed startx and I saw there was an error related to 40-synaptics.conf file. I deleted all the text I added and voilá!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks everyone!&lt;/p&gt;&#xA;" OwnerUserId="8657" LastEditorUserId="8657" LastEditDate="2017-02-20T15:38:20.677" LastActivityDate="2018-05-16T23:20:03.187" Title="Elementary not booting (SOLVED)" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10786" PostTypeId="2" ParentId="10785" CreationDate="2017-02-18T17:31:22.780" Score="1" Body="&lt;p&gt;Are you able to tell whether is just the screen staying black or the whole OS not booting ? I've been having a similar issue on Macbook Pro with an AMD chipset, I was able to tell it had something to do with the graphics since I was able to hear elementaryOS when changing volume, the following link helped:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8177/black-screen-when-installing-os&quot;&gt;Black screen when installing OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8071" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-02-18T17:31:22.780" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10787" PostTypeId="1" CreationDate="2017-02-18T18:16:09.277" Score="0" ViewCount="4838" Body="&lt;p&gt;I'm trying to install elementary OS on a laptop with a windows 8.1 instalation. I wanted to erase everything from the windows installation  and then install nicely the elementary OS on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've mounted the iso in a usb stick and proceeded to installation. When asked about partitions, I choosed &quot;delete everything and install E OS&quot; (or something like it, it was the second option on the menu anyway).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So after everything is downloaded I'm asked to reboot the machine to complete. After, the laptop shows that theres no windows boot manager present and no other boot available to choose from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help!&lt;/p&gt;&#xA;" OwnerUserId="8660" LastActivityDate="2024-03-30T09:05:20.627" Title="Problems with boot after installation" Tags="|system-installation|boot|laptop|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10790" PostTypeId="2" ParentId="10782" CreationDate="2017-02-18T22:33:50.730" Score="1" Body="&lt;p&gt;You can try to boot to the black screen and then press Ctrl+Alt+F1 (or F2-F6, I think).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, you can log in in a console mode and try to remove or reinstall graphics driver. Or you can try to run &lt;code&gt;sudo startx&lt;/code&gt; which should tell you where is the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did this process in Freya when my nVidia driver stopped working with Bumblebee. :-D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="8620" LastActivityDate="2017-02-18T22:33:50.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10793" PostTypeId="1" AcceptedAnswerId="10795" CreationDate="2017-02-19T00:35:13.057" Score="1" ViewCount="4042" Body="&lt;p&gt;I followed a link for making elementary OS better. I copied a sudo command from &lt;a href=&quot;https://gist.github.com/memoryleakx/7567474&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/memoryleakx/7567474&lt;/a&gt; &lt;a href=&quot;https://gist.github.com/memoryleakx/7567474&quot; rel=&quot;nofollow noreferrer&quot;&gt;HowTo Install the perfect Elementary-OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically the command was to remove the bluetooth plug switchboard. I want to know if i can undo this. I appreciate whoever takes the time to answer and hopefully resolve my issue. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="8665" LastEditorUserId="16827" LastEditDate="2019-04-13T07:16:59.063" LastActivityDate="2019-04-13T07:16:59.063" Title="elementary OS Loki Bluetooth" Tags="|release-loki|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="10795" PostTypeId="2" ParentId="10793" CreationDate="2017-02-19T01:45:18.437" Score="3" Body="&lt;p&gt;Checking the script, I saw these bluetooth-related commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bluez&#xA;sudo rm -rf /usr/lib/plugs/GnomeCC/gnomecc-bluetooth.plug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want bluez and has no other alternatives in mind, then you can simply reinstall with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bluez&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For the plug &lt;code&gt;/usr/lib/plugs/GnomeCC/gnomecc-bluetooth.plug&lt;/code&gt;, you can reinstall with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall switchboard-plug-gcc-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="686" LastEditorUserId="578" LastEditDate="2017-02-19T07:45:24.647" LastActivityDate="2017-02-19T07:45:24.647" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10796" PostTypeId="2" ParentId="10785" CreationDate="2017-02-19T11:24:00.303" Score="0" Body="&lt;p&gt;You might try loading a different kernel version ( if you haven't run a sudo autoremove after upgrade, these kernel files must be present)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go for 'advanced options' in grub and select a previous kernel version in the boot options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The OS should successfully boot now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it still stays in black, it should be a graphic driver problem&lt;/p&gt;&#xA;" OwnerUserId="8633" LastActivityDate="2017-02-19T11:24:00.303" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10798" PostTypeId="2" ParentId="10787" CreationDate="2017-02-19T13:04:10.767" Score="0" Body="&lt;p&gt;I looked for an answer to your question, I found something here : [How do I install Ubuntu on a computer without an OS on it? &lt;a href=&quot;https://askubuntu.com/questions/231719/how-do-i-install-ubuntu-on-a-computer-without-an-os-on-it&quot;&gt;duplicate&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just googled &quot;how to install linux on a laptop with no os or boot menu&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps, good luck!&lt;/p&gt;&#xA;" OwnerUserId="8665" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-19T13:04:10.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10799" PostTypeId="1" AcceptedAnswerId="10800" CreationDate="2017-02-19T16:05:16.683" Score="0" ViewCount="356" Body="&lt;p&gt;I accidentally removed it - it is as simple as adding 'wingpanel' custom command to the startup from inside the applications system setting menu? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems to work,but not sure if that is the 'right way'.&lt;/p&gt;&#xA;" OwnerUserId="8673" LastActivityDate="2017-02-19T19:52:18.697" Title="How can I add wingpanel to startup" Tags="|release-loki|wingpanel|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10800" PostTypeId="2" ParentId="10799" CreationDate="2017-02-19T17:24:43.307" Score="0" Body="&lt;p&gt;You can install eOS Tweaks and there is a section called Cerberus. Wingpanel is added by default there so that whenever wingpanel is closed or crashes, it starts automatically.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-02-19T17:24:43.307" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10802" PostTypeId="2" ParentId="9123" CreationDate="2017-02-19T19:02:32.917" Score="2" Body="&lt;p&gt;This is the best guide I have found to get dual-boot working.&#xA;&lt;a href=&quot;https://github.com/aroman/elementary-on-a-mac/tree/2017-updates&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/aroman/elementary-on-a-mac/tree/2017-updates&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8621" LastActivityDate="2017-02-19T19:02:32.917" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10803" PostTypeId="1" AcceptedAnswerId="10804" CreationDate="2017-02-19T19:07:55.423" Score="3" ViewCount="670" Body="&lt;p&gt;Is it safe to update Os Loki, to the newest 4.8 kernel?&#xA;I now have 4.4-generic kernel.&lt;/p&gt;&#xA;" OwnerUserId="8565" LastActivityDate="2017-02-20T12:50:31.103" Title="I don't know if it is safe to update genetic kernel to 4.8" Tags="|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10804" PostTypeId="2" ParentId="10803" CreationDate="2017-02-19T19:30:10.763" Score="8" Body="&lt;p&gt;Now that the Ubuntu 16.04.2 was released, you can safely update to the 4.8 kernel version. It's safe and works without issues. You can use this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --install-recommends xserver-xorg-hwe-16.04&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-02-19T19:30:10.763" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10805" PostTypeId="2" ParentId="10799" CreationDate="2017-02-19T19:52:18.697" Score="0" Body="&lt;p&gt;There is a program for it:&#xA;Run &lt;code&gt;gnome-session-properties&lt;/code&gt;.&#xA;You should see all the programs that startup automatically with new session. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can edit it, so just add wingpanel and it should be alright. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-02-19T19:52:18.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10806" PostTypeId="1" CreationDate="2017-02-19T21:28:59.717" Score="1" ViewCount="36" Body="&lt;p&gt;I tried several distros, but for some reason, the sound is low even when I allow the sound to be more than 100%, which is not good because it ruins the quality of the sound. The sound is good on windows, but I don't know what's the problem with Linux exactly. Can I get the same sound as windows on Linux? &lt;/p&gt;&#xA;" OwnerUserId="6975" LastActivityDate="2017-02-19T21:28:59.717" Title="The sound is low compared to windows" Tags="|settings|sound|" AnswerCount="0" CommentCount="0" ClosedDate="2017-02-22T18:40:45.497" ContentLicense="CC BY-SA 3.0" />
  <row Id="10807" PostTypeId="1" CreationDate="2017-02-19T23:26:11.700" Score="0" ViewCount="641" Body="&lt;p&gt;I successfully used the &lt;a href=&quot;https://wiki.ubuntu.com/vlan&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Wiki page&lt;/a&gt; to configure a VLAN interface manually, but I want this to take place at boot. How can this be done?&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2019-04-18T13:03:20.637" Title="How do I configure a VLAN interface to start at boot?" Tags="|settings|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10808" PostTypeId="2" ParentId="10807" CreationDate="2017-02-19T23:26:11.700" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install vlan&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo su -c 'echo &quot;8021q&quot; &amp;gt;&amp;gt; /etc/modules'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo su -c 'echo &quot;source /etc/network/interfaces.d/*&quot; &amp;gt;&amp;gt; /etc/network/interfaces'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Create a new file in directory &lt;code&gt;/etc/network/interfaces.d/&lt;/code&gt; e.g.&lt;code&gt;vlan10&lt;/code&gt; with the following contents:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;auto enp3s0.10&lt;br&gt;&#xA;  iface enp3s0.10 inet dhcp&lt;br&gt;&#xA;   vlan-raw-device enp3s0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;* The actual device name, &lt;code&gt;enp3s0&lt;/code&gt; in this case, will vary depending on your network driver&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2017-02-27T01:12:15.870" LastActivityDate="2017-02-27T01:12:15.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10809" PostTypeId="1" CreationDate="2017-02-20T00:05:32.290" Score="2" ViewCount="4954" Body="&lt;p&gt;A few days ago my new Dell XPS 15 9650 arrived. So far I managed to get only Windows 10 to install, but I really want to use elementary instead. After two days of fiddling around, I finally give up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have free disk space which I formatted and changed to an ext4 partition with GParted. Then I took some memory aside for a swap partition, which is equal to the size of my RAM. Trying to install elementary, this message pops up after a few minutes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Bootloader couldn't be installed at the right place.&quot; (freely translated from German)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am now presented with 3 options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&quot;Please choose another device to install grub&quot;, followed by a list of all devices&lt;/li&gt;&#xA;&lt;li&gt;&quot;Continue without installation of grub&quot;&lt;/li&gt;&#xA;&lt;li&gt;&quot;Abort installation&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Choosing either of that I can't press the next button, or at least it doesn't do anything. Is this a problem of the GUI, or am I doing something completly wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For info: I am using a UEFI system, but I started the live stick in BIOS Legacy mode, because elementary keeps telling me that Windows is installed as such system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this article: &lt;a href=&quot;https://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&lt;/a&gt;&#xA;But since this is a live stick, I can't install that...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my setup so far:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/y55is.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y55is.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I even think, that I've found a solution, but I don't know how to create such an EFI boot section: &lt;a href=&quot;https://askubuntu.com/questions/696999/unable-to-install-grub-in-dev-nvme&quot;&gt;https://askubuntu.com/questions/696999/unable-to-install-grub-in-dev-nvme&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could somebody be so kind and help me here out!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best Regards,&#xA;Nico&lt;/p&gt;&#xA;" OwnerUserId="8680" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2018-07-15T20:42:57.980" Title="Troubles installing Grub in UEFI mode" Tags="|boot|grub|uefi|ssd|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10810" PostTypeId="2" ParentId="10809" CreationDate="2017-02-20T03:38:43.533" Score="0" Body="&lt;p&gt;I also found this. Although I know you're not using Greta, concept is the Same. &lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dual boot&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8665" LastActivityDate="2017-02-20T03:38:43.533" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10811" PostTypeId="2" ParentId="9123" CreationDate="2017-02-20T04:44:19.493" Score="0" Body="&lt;p&gt;I installed elementary os on a macbook air 6,2 and the only thing that does not work is the camera, the thunder bolt, and some keyboard issue. i will wait for an update/upgrade to the hardware. unless someone find out the way around &#xA;thank&lt;/p&gt;&#xA;" OwnerUserId="8683" LastActivityDate="2017-02-20T04:44:19.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10812" PostTypeId="1" CreationDate="2017-02-20T05:16:30.870" Score="0" ViewCount="908" Body="&lt;p&gt;I'm trying to install libgtk2.0-0:i386 to solve this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error while loading shared libraries: libgtk-x11-2.0.so.0: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, when I try &lt;code&gt;sudo apt-get install libgtk2.0-0:i386&lt;/code&gt;, I get the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; libgtk2.0-0:i386 : Depends: libatk1.0-0:i386 (&amp;gt;= 1.32.0) but it is not going to be installed&#xA;                    Depends: libgdk-pixbuf2.0-0:i386 (&amp;gt;= 2.22.0) but it is not going to be installed&#xA;                    Depends: libglib2.0-0:i386 (&amp;gt;= 2.41.1) but it is not going to be installed&#xA;                    Depends: libpango-1.0-0:i386 (&amp;gt;= 1.28.3) but it is not going to be installed&#xA;                    Depends: libpangocairo-1.0-0:i386 (&amp;gt;= 1.28.3) but it is not going to be installed&#xA;                    Depends: libpangoft2-1.0-0:i386 (&amp;gt;= 1.28.3) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I try to use aptitude instead as I've seen suggested elsewhere,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;  libatk1.0-0:i386{a} libavahi-client3:i386{a} libavahi-common-data:i386{a} libavahi-common3:i386{a} libcairo2:i386{a} libcomerr2:i386{a} libcups2:i386{a} libdatrie1:i386{a} libfontconfig1:i386{a} libfreetype6:i386{a} &#xA;  libgdk-pixbuf2.0-0:i386{a} libglib2.0-0:i386{ab} libgmp10:i386{a} libgnutls30:i386{a} libgraphite2-3:i386{a} libgssapi-krb5-2:i386{a} libgtk2.0-0:i386 libharfbuzz0b:i386{a} libhogweed4:i386{a} libidn11:i386{a} libjbig0:i386{a} &#xA;  libjpeg-turbo8:i386{a} libjpeg8:i386{a} libk5crypto3:i386{a} libkeyutils1:i386{a} libkrb5-3:i386{a} libkrb5support0:i386{a} libnettle6:i386{a} libp11-kit0:i386{a} libpango-1.0-0:i386{a} libpangocairo-1.0-0:i386{a} &#xA;  libpangoft2-1.0-0:i386{a} libpixman-1-0:i386{a} libtasn1-6:i386{a} libthai0:i386{a} libtiff5:i386{a} libxcb-render0:i386{a} libxcb-shm0:i386{a} libxcomposite1:i386{a} libxcursor1:i386{a} libxi6:i386{a} libxrandr2:i386{a} &#xA;  libxrender1:i386{a} &#xA;0 packages upgraded, 43 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 7,693 kB of archives. After unpacking 25.4 MB will be used.&#xA;The following packages have unmet dependencies:&#xA; libglib2.0-0 : Breaks: libglib2.0-0:i386 (!= 2.48.2-0ubuntu1+elementary0.4.1) but 2.48.2-0ubuntu1 is to be installed.&#xA; libglib2.0-0:i386 : Breaks: libglib2.0-0 (!= 2.48.2-0ubuntu1) but 2.48.2-0ubuntu1+elementary0.4.1 is installed.&#xA;The following actions will resolve these dependencies:&#xA;&#xA;     Keep the following packages at their current version:&#xA;1)     libatk1.0-0:i386 [Not Installed]                   &#xA;2)     libgdk-pixbuf2.0-0:i386 [Not Installed]            &#xA;3)     libglib2.0-0:i386 [Not Installed]                  &#xA;4)     libgtk2.0-0:i386 [Not Installed]                   &#xA;5)     libharfbuzz0b:i386 [Not Installed]                 &#xA;6)     libpango-1.0-0:i386 [Not Installed]                &#xA;7)     libpangocairo-1.0-0:i386 [Not Installed]           &#xA;8)     libpangoft2-1.0-0:i386 [Not Installed]             &#xA;&#xA;&#xA;&#xA;Accept this solution? [Y/n/q/?] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which doesn't actually do anything.  All the other proposed solutions involve removing a large number of fundamental packages (like elementary-desktop).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it helps, the output of &lt;code&gt;sudo apt-get update&lt;/code&gt; is &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://nz.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://nz.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                                                     &#xA;Hit:3 http://nz.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                                                   &#xA;Ign:4 http://dl.google.com/linux/chrome/deb stable InRelease                                                                                                   &#xA;Hit:5 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Get:6 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]                     &#xA;Hit:7 http://dl.google.com/linux/chrome/deb stable Release                                               &#xA;Hit:9 http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu xenial InRelease                              &#xA;Get:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease [17.6 kB]&#xA;Ign:11 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:11 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:11 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Err:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main DEP-11 64x64 Icons&#xA;  404  Not Found&#xA;Ign:11 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Fetched 120 kB in 4s (28.9 kB/s)&#xA;Reading package lists... Done&#xA;E: Failed to fetch http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/dists/xenial/main/dep11/icons-64x64.tar  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm fairly sure the error there isn't related but if anyone has any clues as to what's going on there that would also be great.&lt;/p&gt;&#xA;" OwnerUserId="229" LastActivityDate="2017-02-20T05:16:30.870" Title="Install libgtk2.0-0:i386 dependency problems" Tags="|apt|dependencies|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-25T19:14:45.627" ContentLicense="CC BY-SA 3.0" />
  <row Id="10813" PostTypeId="1" AcceptedAnswerId="17993" CreationDate="2017-02-20T12:09:47.187" Score="3" ViewCount="133" Body="&lt;p&gt;For some reason, the Gtk About Dialog is not appearing properly. My class is a subclass of Granite.Application. The About dialog which comes as part of the elementary desktop is also with the same problematic appearance. I have not been able to produce this with a MVCE yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have attached a screen shots of how the icon and the about dialog is appearing. After I do the build from source the icon and the about come properly. However, after installing from a Launchpad PPA it comes up with the incorrect looking About.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate any help on this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The code is on GitHub here:&#xA;&lt;a href=&quot;https://github.com/babluboy/bookworm/blob/master/src/bookworm.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/babluboy/bookworm/blob/master/src/bookworm.vala&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate any help on resolving this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/whIvA.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/whIvA.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="16827" LastEditDate="2019-01-08T18:03:14.993" LastActivityDate="2019-01-21T10:04:34.293" Title="Gtk Granite : About Dialog not appearing properly" Tags="|vala|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="10814" PostTypeId="2" ParentId="10803" CreationDate="2017-02-20T12:50:31.103" Score="4" Body="&lt;p&gt;It is relatively safe, though problems can always manifest. I recommend using Ukuu to do the upgrade and follow the method listed here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&quot; rel=&quot;noreferrer&quot;&gt;http://www.makeuseof.com/tag/upgrade-kernel-ukuu-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This allows you to easily roll back to 4.4 if you are experiencing issues.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-20T12:50:31.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10815" PostTypeId="1" CreationDate="2017-02-20T15:50:28.080" Score="0" ViewCount="243" Body="&lt;p&gt;I tried installing elementary tweaks tool with the following commands and it didn't work. Then when I rebooted the system it crashed after login, this happens every time I try. The commands I used are below&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8687" LastEditorUserId="578" LastEditDate="2017-02-20T22:19:32.757" LastActivityDate="2017-02-24T16:07:19.857" Title="Elements tweaks does not show up/open and my computer crashes when I reboot" Tags="|thirdpartyapps|" AnswerCount="2" CommentCount="0" ClosedDate="2017-02-26T01:15:21.053" ContentLicense="CC BY-SA 3.0" />
  <row Id="10818" PostTypeId="1" CreationDate="2017-02-20T18:28:56.293" Score="0" ViewCount="167" Body="&lt;p&gt;I am all for usability. As a web developer and designer, I strive for this in all projects. And I applaud Elementary OS for doing so much to improve the typically inconsistent Linux user experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, messing with the titlebar controls and UI standards from the two other main OSes makes no sense to me. Here's my issues:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;having the controls inline with menu and other functions is straight-up confusing. More so when a piece of software doesn't support this; all of a sudden SOME programs have the controls inline, some don't. This is confusing.&lt;/li&gt;&#xA;&lt;li&gt;Moving the controls to opposite sides of the window is just flat-out unintuitive. At best, it's awkward. At worst, it may cause someone to close a window they meant to expand or vice-versa. &lt;/li&gt;&#xA;&lt;li&gt;Why hide the minimize? This is a convention both other OSes use and people understand. Removing it just adds to the clutter of the desktop and does nothing to improve adoption.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I get that you can change all of this using Tweaks. But I simply don't understand why an end-user should have to conform to an OS's quirks when the OS could easily conform to the standards - in this case, min/max/close, more or less established by OSX and Win literally decades ago. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to mess with this to force your own agenda is either short-sighted or just ignorant. I love Linux in all its variants, but having to learn a new way to minimize an app (or not at all in this case) or figure out where the controls are is just ridiculous. I use a Mac at work and Win10 at home, so switching corners for the controls isn't an issue for me; completely changing the paradigm of how they function is.&lt;/p&gt;&#xA;" OwnerUserId="8691" LastActivityDate="2017-03-27T16:03:55.093" Title="What is the rationale around changing standard UI conventions - specifically max/min/close titlebar controls?" Tags="|user-interface|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10823" PostTypeId="1" AcceptedAnswerId="10829" CreationDate="2017-02-21T03:59:06.817" Score="2" ViewCount="404" Body="&lt;p&gt;Is there anyway to have the f.lux indicator look native to elementary OS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe just black and white?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qQQ2y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qQQ2y.png&quot; alt=&quot;wingpanel&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8621" LastActivityDate="2017-02-22T19:41:26.800" Title="F.lux indicator on wingpanel" Tags="|wingpanel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10825" PostTypeId="1" AcceptedAnswerId="10828" CreationDate="2017-02-21T09:45:40.663" Score="1" ViewCount="2489" Body="&lt;p&gt;Installed for eOS has an option to &quot;Erase Ubuntu16.10 and reinstall&quot; - this will delete my previous Ubuntu and install eOS without touching my Win7 correct? I am okay with losing everything on the Ubuntu partitions but not the one with Win7 on it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cPGla.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cPGla.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my current setup:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IzjD2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IzjD2.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="8700" LastEditorDisplayName="user170" LastEditDate="2017-02-21T10:59:09.860" LastActivityDate="2017-02-22T02:08:52.877" Title="Will &quot;Erase Ubuntu16.10 and reinstall&quot; keep my Win7 installation?" Tags="|system-installation|dual-boot|" AnswerCount="2" CommentCount="30" ContentLicense="CC BY-SA 3.0" />
  <row Id="10826" PostTypeId="2" ParentId="9787" CreationDate="2017-02-21T09:59:39.687" Score="0" Body="&lt;p&gt;I had the same issue and after some search I found 3 solution I implement in my laptop. Cursor still &quot;clicking/blinking&quot; but less than before. Here is my changes to lessen this behavior:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First try to add in &lt;code&gt;/etc/environment&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CLUTTER_PAINT=disable-clipped-redraws:disable-culling&#xA;CLUTTER_VBLANK=True&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and logout and login again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;II.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this does not help try from console:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;settings set org.gnome.settings-daemon.plugins.cursor active false &amp;amp;&amp;amp; gsettings set org.gnome.settings-daemon.plugins.cursor active true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;III.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the problem still occurs and you have Intel video cards you could also create file &lt;code&gt;/usr/share/X11/xorg.conf.d/20-intel.conf&lt;/code&gt; and add in there:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;   Identifier &quot;Intel Graphics&quot;&#xA;   Driver &quot;intel&quot;&#xA;   Option &quot;AccelMethod&quot;  &quot;uxa&quot;&#xA;   Option &quot;TearFree&quot; &quot;True&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that you need to restart your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case I'm not sure what helped most, because I implemented those changes one by one, and cursor blinking less now. Still most annoying this is on Scrivener program running from wine. When I write on Firefox or mail there is nearly no blinking. My Elementary is running on VirtualBox and my laptop has Intel graphic card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this can help you.&lt;/p&gt;&#xA;" OwnerUserId="7192" LastActivityDate="2017-02-21T09:59:39.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10828" PostTypeId="2" ParentId="10825" CreationDate="2017-02-21T12:17:03.280" Score="2" Body="&lt;p&gt;You should use the &lt;strong&gt;&lt;em&gt;last&lt;/em&gt;&lt;/strong&gt; (Something else) option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;strong&gt;&lt;em&gt;first&lt;/em&gt;&lt;/strong&gt; option should be fine in Loki (the &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/ubiquity/+bug/1265192&quot; rel=&quot;nofollow noreferrer&quot;&gt;old bug&lt;/a&gt; mentioned in my comments above should be fixed by now in 14.04 and not affect 16.04 and Loki at all, but &lt;strong&gt;I cannot confirm that&lt;/strong&gt;). (I have posted a question on that: &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10827/170&quot;&gt;Is the ubicuity bug 1265192 (or similar) affecting Loki installer?&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You have too many data on your drive to risk it&lt;/strong&gt; without full backup.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;You should consider backup in all cases given that a lot of risk is involved in partitioning.&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Considering our exchanges in comments and the links I have posted there on whether you should use or not a separate &lt;code&gt;/home&lt;/code&gt; partition - and especially considering your setup:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You can have two partitions  &lt;code&gt;/&lt;/code&gt; and &lt;code&gt;/home&lt;/code&gt; for elementary as you had for Ubuntu. As you said, you can remove them and create new ones as you did for Ubuntu; but you also have other options; for example, the separate &lt;code&gt;/home&lt;/code&gt; partition is not at all a necessity; see below.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you want a separate &lt;code&gt;/home&lt;/code&gt; partition; I think you said in a comment you want to get rid of your old settings; then you should not keep the ubuntu &lt;code&gt;/home&lt;/code&gt; partition, but replace that too with a new one. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In fact you &lt;em&gt;could&lt;/em&gt; keep your old Ubuntu &lt;code&gt;home&lt;/code&gt; partition by not deleting it and by just setting the &lt;code&gt;/home&lt;/code&gt; mount-point to that partition when you install elementary, but then you would also keep the settings from your Ubuntu system in the newly installed elementary. That depends on what you need.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can if you want use only one single &lt;code&gt;/&lt;/code&gt; partition instead of the two (after deleting those). See the pro and cons &lt;a href=&quot;https://askubuntu.com/questions/142695/what-are-the-pros-and-cons-of-having-a-separate-home-partition&quot;&gt;here&lt;/a&gt;. (I personally am skeptic as to the usefulness of the separate home partition; more here: &lt;a href=&quot;https://askubuntu.com/q/885732/47206&quot;&gt;Is it safe to only have one partition (&lt;code&gt;/&lt;/code&gt;) per system?&lt;/a&gt;).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Keep the swap partition as it is.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-02-21T14:03:44.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10829" PostTypeId="2" ParentId="10823" CreationDate="2017-02-21T12:27:46.450" Score="4" Body="&lt;p&gt;This worked for me...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cybre/elementaryplus&#xA;&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&#xA;sudo apt-get install elementaryplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3mgfw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3mgfw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-22T03:17:59.383" LastActivityDate="2017-02-22T03:17:59.383" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10830" PostTypeId="1" AcceptedAnswerId="10831" CreationDate="2017-02-21T15:43:43.050" Score="1" ViewCount="816" Body="&lt;p&gt;I'm looking to buy a new laptop and I'm stunned from the design and performance of Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking for laptop, I found the Acer Swift 3 SF314-51 (for a price below 900 EUR), and before buying it, I would really like to know if Linux is supported. Would love to hear from someone that already has it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In alternative, my other options (if Elementary OS generally goes ok with them) are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell Inspiron 13&lt;/li&gt;&#xA;&lt;li&gt;Lenovo Yoga 710&lt;/li&gt;&#xA;&lt;li&gt;New thinkpad 13? Or others good Lenovo?&lt;/li&gt;&#xA;&lt;li&gt;HP Envy 13&lt;/li&gt;&#xA;&lt;li&gt;Asus zenbook?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks for the answers!&lt;/p&gt;&#xA;" OwnerUserId="8706" LastActivityDate="2017-02-21T17:39:00.770" Title="Compatibility on Acer Swift 3 SF314-51" Tags="|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10831" PostTypeId="2" ParentId="10830" CreationDate="2017-02-21T17:39:00.770" Score="0" Body="&lt;p&gt;Double check any Lenovo option you're considering. There are dozens of topics like this one on Lenovo forums (it's not even Linux specific): &lt;a href=&quot;https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-710-Constant-Fan-Noise-even-when-idle/td-p/3354501&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-710-Constant-Fan-Noise-even-when-idle/td-p/3354501&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just got Lenovo 510s-13IKB (i5-7200U, 8GB, 256GB SSD). Upgraded the kernel to the latest stable (4.9.11), because of the Kaby Lake CPU, but I guess Loki with the latest HWE stack should work just as fine. Everything works, keyboard backlight, all the Fn keys. Just the problem with the constant fan noise.&#xA;My 3 year old Asus is way more quiet than the new Lenovo :(&lt;/p&gt;&#xA;" OwnerUserId="1009" LastActivityDate="2017-02-21T17:39:00.770" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10832" PostTypeId="2" ParentId="10815" CreationDate="2017-02-21T18:47:19.963" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo apt remove elementary-tweaks --purge&#xA;sudo apt update&#xA;sudo apt upgrade -y&#xA;sudo apt install elementary-tweaks -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-02-21T18:47:19.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10833" PostTypeId="2" ParentId="10825" CreationDate="2017-02-21T23:31:13.417" Score="-1" Body="&lt;p&gt;In my opinion, keep your Ubuntu there, do not install elementary. Because you cannot upgrade elementary OS without reinstall it. I cannot stand this. So I leave elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if you still want to install I suggest you &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;quiting the installation go to your Ubuntu, &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;view your partition in your disk(search it on-line), and remember it,&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go back to install elementary&#xA;And Choose last option&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Erase the partitions except the /home and Windows partitions&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;And remember when you install a Linux distribution, no matter what distribution it is set your partitions by your self. You can get the partitions knowledge easily like &lt;a href=&quot;https://www.howtogeek.com/howto/35676/how-to-choose-a-partition-scheme-for-your-linux-pc/&quot; rel=&quot;nofollow noreferrer&quot;&gt;partition scheme&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2780" LastEditorUserId="2780" LastEditDate="2017-02-22T02:08:52.877" LastActivityDate="2017-02-22T02:08:52.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10834" PostTypeId="1" CreationDate="2017-02-22T02:18:29.517" Score="1" ViewCount="871" Body="&lt;p&gt;I am new to Linux and having a very difficult time running Elementary OS Loki without any hiccups. I am currently running it on a 2011 Macbook Pro with an AMD Radeon GPU as well as an integrated Intel GPU. I want to disable the AMD GPU but cannot figure out how. I have searched for several hours and have not solved my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently I have &quot;nomodeset&quot; written before &quot;quiet splash&quot; in grub in order to be able to use the laptop. To my knowledge, both graphics cards are still operating. If I do not have &quot;nomodeset&quot; written in, upon booting the screen will remain black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like I said, I am new and have searched for several hours and this is as far as I have been able to come. I have tried many different methods (posted a few below) and am still lost. Thank you for any help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To edit file :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find line :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And replace with :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash radeon.modeset=0 amdgpu.runpm=0&#xA;acpi_backlight=intel_backlight&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To regenerate config :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/default/grub: Add &lt;code&gt;amdgpu.runpm=0&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt;&#xA;Included above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/rc.local&lt;/code&gt;: Add the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo OFF &amp;gt; /sys/kernel/debug/vgaswitcheroo/switch&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This step caused my system to freeze on shutdown so I just skipped it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/X11/xorg.conf&lt;/code&gt;: Create the file if it doesn't exist, and add the&lt;br&gt;&#xA;following in order to get the backlight controls working (otherwise it &#xA;would be misdetected):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier &quot;Card0&quot;&#xA;    Driver &quot;intel&quot;&#xA;    Option &quot;Backlight&quot; &quot;intel_backlight&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This step is replaced replaced above by &lt;code&gt;acpi_backlight=intel_backlight&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8713" LastEditorUserId="4427" LastEditDate="2017-02-26T01:15:36.517" LastActivityDate="2017-02-26T01:15:36.517" Title="Cannot disable AMD Graphics card, I want to run only Intel Integrated" Tags="|release-loki|boot|macbook|amd|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10836" PostTypeId="1" CreationDate="2017-02-22T05:58:28.013" Score="1" ViewCount="213" Body="&lt;p&gt;I installed elementary Loki as a fresh install on a new hard-drive. (Note I had it on my old drive.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The install goes perfectly but after installing any software or updating the system when I restart it only goes passed inputting my security key then the screen goes blank (Black).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In short I never get to the login screen &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is nothing on the screen and as I said it was running perfectly on my previous drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the ISO with a hash key and it was perfectly fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also downloaded it multiple times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing I did note the file size of the ISO on the website said 1.32 GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once the download was complete it was 1.2 GB with every download even via Torrent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any assistance would be greatly appreciated thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Specs are indicated in the attached screen-shot  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LFPzo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LFPzo.png&quot; alt=&quot;System Specs&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note in the interim I am running Linux Mint &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind Regards.&lt;/p&gt;&#xA;" OwnerUserId="8714" LastEditorUserId="16827" LastEditDate="2019-01-08T17:16:52.087" LastActivityDate="2019-01-08T17:16:52.087" Title="How can I solve the blank screen after installing Elementary OS Loki 4" Tags="|system-installation|display|greeter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10839" PostTypeId="1" CreationDate="2017-02-22T15:07:33.560" Score="1" ViewCount="237" Body="&lt;p&gt;Short question : Is Loki shipped with a support for &lt;code&gt;ltsp&lt;/code&gt; remote stations ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long version : Will the &lt;a href=&quot;/questions/tagged/command-line&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;command-line&amp;#39;&quot; rel=&quot;tag&quot;&gt;command-line&lt;/a&gt; &lt;code&gt;ltsp-build-client&lt;/code&gt;  build a thin client for Loki based on Pantheon ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 1&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Found a quick way to get a thin client running.&#xA;Before launching 'ltsp-build-client' command, you'll need to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/share/ltsp/plugins/ltsp-build-client &amp;amp;&amp;amp; ln -s Ubuntu elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can run :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ltsp-build-client --debug --dist xenial&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Using a pxe [tag:boot from a thin client gave me access to a Pantheon session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But using a 100 Mbts switch is not powerfull enough. Pantheon is really slow and lags on almost every action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll give a try with a gigabite switch.&lt;/p&gt;&#xA;" OwnerUserId="8722" LastEditorUserId="16827" LastEditDate="2019-01-08T17:23:08.440" LastActivityDate="2019-01-08T17:23:08.440" Title="Loki : LTSP support" Tags="|release-loki|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="10840" PostTypeId="1" AcceptedAnswerId="10841" CreationDate="2017-02-22T15:59:06.300" Score="0" ViewCount="92" Body="&lt;p&gt;Good morning,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running Loki w/ 4.8.0-34-generic kernel on a 2016 HP Spectre x360 w/ edge drivers loaded (so I can get my wifi to work; &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9874/intel-8265-doesnt-work-in-loki&quot;&gt;Intel 8265 doesn&amp;#39;t work in Loki&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last night I left the OS running, I closed the lid and went to bed. This morning when I opened the lid I was at the login prompt (GUI). Trackpad is dead. So, I toggled by input switching device (this allows me to share keyboard and mouse across multiple devices via USB) so that I could access my external mouse. This worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I logged in and everything was fine. Being the curious type, I started to try and figure out how to resolve this lip-closed/open and frozen trackpad. Inevitably I found myself at the console via ctrl-alt+F1. I didn't make any changes, just flipped to console.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like and &lt;strong&gt;idiot&lt;/strong&gt; instead of just flipping back to GUI login via ctrl-alt+F7, I issued a 'sudo startx' command and got that awesome error. You know the one? That startx is deprecated because it's not safe or whatever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, now my system is totally jacked. I cannot login via GUI even after reboot. System presents login, I give password and it acts like it's trying to go to desktop but it never does. Just loops me back to login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat of Xorg.0.log gives me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;533.404 (II) XINPUT: adding extended input device &quot;ELAN0732:00 04F3:249E&quot; (type: touchscreen, id 10)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing else. And, my wifi card won't come up so I can't even do a re-install on XORG. I've tried raising the device via 'iwconfig' to no avail. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas where to go from here?&lt;/p&gt;&#xA;" OwnerUserId="7919" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-02-22T16:21:03.883" Title="XORG issue from frozen trackpad - crumb!" Tags="|boot|wifi|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10841" PostTypeId="2" ParentId="10840" CreationDate="2017-02-22T16:21:03.883" Score="2" Body="&lt;p&gt;It appears that the answer to my problem had to do with .xAuthority being given to root as opposed to my username.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This AskUbuntu post solved it: &lt;a href=&quot;https://askubuntu.com/questions/223501/ubuntu-gets-stuck-in-a-login-loop&quot;&gt;https://askubuntu.com/questions/223501/ubuntu-gets-stuck-in-a-login-loop&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7919" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-22T16:21:03.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10842" PostTypeId="1" AcceptedAnswerId="10847" CreationDate="2017-02-22T16:52:30.770" Score="0" ViewCount="584" Body="&lt;p&gt;On Mac, when I recive a message in Google Hangout, WhatsApp or Slack, an notify pop is shown, is this also possible in elementary?&lt;/p&gt;&#xA;" OwnerUserId="8625" LastEditorUserId="8723" LastEditDate="2017-02-22T17:01:10.997" LastActivityDate="2017-02-22T23:05:32.827" Title="Hangout/WhatsApp/Slack in notifications" Tags="|wingpanel|notifications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10844" PostTypeId="1" AcceptedAnswerId="10846" CreationDate="2017-02-22T18:30:41.430" Score="4" ViewCount="752" Body="&lt;p&gt;Should I enable the proprietary CPU drivers displayed under 'Software &amp;amp; updates - Additional drivers'?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Itprp.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Itprp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-02-22T19:35:04.843" Title="Should I install the proprietary CPU drivers?" Tags="|release-loki|drivers|intel|cpu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10846" PostTypeId="2" ParentId="10844" CreationDate="2017-02-22T19:35:04.843" Score="3" Body="&lt;p&gt;Enabling this wouldn't harm your machine. Users of CPUs belonging to the Intel Haswell and Broadwell processor families in particular must install these microcode updates to ensure system stability. But all Intel users should install the updates as a matter of course.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-02-22T19:35:04.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10847" PostTypeId="2" ParentId="10842" CreationDate="2017-02-22T19:37:12.340" Score="0" Body="&lt;p&gt;Slack has a native Linux app and is using notifications that are implemented by the OS. So, on eOS notifications from slack are just like other eOS notifications.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-02-22T19:37:12.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10848" PostTypeId="2" ParentId="10823" CreationDate="2017-02-22T19:41:26.800" Score="1" Body="&lt;p&gt;You can try using another icon pack, like &lt;a href=&quot;https://github.com/PapirusDevelopmentTeam/papirus-icon-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Papirus&lt;/a&gt;. They have integrated support for &lt;a href=&quot;https://github.com/bil-elmoussaoui/Hardcode-Tray&quot; rel=&quot;nofollow noreferrer&quot;&gt;Hardcode-Tray&lt;/a&gt; and will make all your icons from wingpanel look like native.&lt;/p&gt;&#xA;" OwnerUserId="2677" LastActivityDate="2017-02-22T19:41:26.800" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10849" PostTypeId="1" CreationDate="2017-02-22T19:59:05.947" Score="1" ViewCount="486" Body="&lt;p&gt;Is there a way to increase Videos (Audience) sound volume more than 100%, like in VLC? I don't mean the output volume from sound settings because that creates distortions.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-02-23T18:29:35.113" Title="Is there a way to increase Videos (Audience) sound volume more than 100%?" Tags="|release-loki|sound|videos|audience|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10851" PostTypeId="2" ParentId="10842" CreationDate="2017-02-22T23:05:32.827" Score="1" Body="&lt;p&gt;Slack notifications can be enabled in the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MqwFY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MqwFY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-22T23:05:32.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10852" PostTypeId="2" ParentId="10849" CreationDate="2017-02-23T00:43:38.777" Score="0" Body="&lt;p&gt;You could use the Pulseaudio Equalizer to boost the audio. It would give you finer control and maybe reduce the distortion. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:alex-wv/pulseaudio-equalizer-ppa&#xA;sudo apt update&#xA;sudo apt install pulseaudio-equalizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="578" LastEditDate="2017-02-23T18:29:35.113" LastActivityDate="2017-02-23T18:29:35.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10854" PostTypeId="1" CreationDate="2017-02-23T06:00:06.673" Score="1" ViewCount="671" Body="&lt;p&gt;i can't see any of my hard drivers on the installation, but when I run &lt;strong&gt;gparted&lt;/strong&gt; they are both there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I see then on installation or install from live boot via terminal?&lt;/p&gt;&#xA;" OwnerUserId="8728" LastEditorUserId="19360" LastEditDate="2019-12-15T03:11:11.773" LastActivityDate="2022-08-31T17:06:10.560" Title="can't see my hdd or ssd on instalation" Tags="|system-installation|ssd|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10855" PostTypeId="2" ParentId="10818" CreationDate="2017-02-23T06:07:17.523" Score="0" Body="&lt;p&gt;You can enable these buttons via terminal. I would also like to add your point is valid for a lot of users but most users in my experience get the hang of it within the first two days. I myself love it. Furthermore elementary is a Linux Distribution which means like almost all Linux Distributions it stands for freedom to do as you wish. You want the buttons add them. You don't you don't. I have played with elementary a lot and I can tell you it just doesn't feel the same and have the same elegance if you minimize the same way as Windows or Mac perhaps Steve Jobs said it best and this may or may not apply to elementary developers but think different.&lt;/p&gt;&#xA;" OwnerUserId="8714" LastActivityDate="2017-02-23T06:07:17.523" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10856" PostTypeId="1" CreationDate="2017-02-23T08:19:02.717" Score="3" ViewCount="394" Body="&lt;p&gt;All,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is some background info&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Chip : Intel 7265 wireless chip.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My OS: eOS loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My kernel: 4.8.0-39-generic x86_64&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My wifi will down after waking up from a long suspend. Within network manager, all the wireless networks are gone. I cannot signin to any wireless network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dmesg output goes here. Can someone help me on this?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tGqbd.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tGqbd.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lshw -C network output goes here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dQL9K.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dQL9K.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8729" LastEditorUserId="8729" LastEditDate="2017-02-23T08:32:36.027" LastActivityDate="2017-02-23T10:47:29.450" Title="Wifi down after waking up from a long suspend" Tags="|wifi|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10857" PostTypeId="1" CreationDate="2017-02-23T09:05:24.037" Score="1" ViewCount="1627" Body="&lt;p&gt;For over a month I have a problem with bluetooth.&#xA;I couldn't turn it on from wingpanel icon, but it was possible to do that from System Settings.&#xA;However, after bluetooth was turned on, I couldn't connect to device via &lt;em&gt;System Settings&lt;/em&gt; tab and I could connect to it only choosing device from wingpanel icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, this week after update, I lost completely Bluetooth in &lt;em&gt;System Settings&lt;/em&gt; (there is no icon) and when I click wingpanel icon and go to &lt;em&gt;Bluetooth Settings...&lt;/em&gt; it opens bluetooth tab, but turning bluetooth on doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the only way to turn my bluetooth on is with terminal &lt;code&gt;bluetooth on&lt;/code&gt; command.&#xA;Probably I should be happy that my bluetooth works at all, but this system should be simple and beautiful so I'd like to have this simplicity.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-09-25T19:52:26.540" Title="Problems with bluetooth" Tags="|settings|wingpanel|system|bluetooth|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10858" PostTypeId="2" ParentId="1382" CreationDate="2017-02-23T10:44:15.063" Score="0" Body="&lt;p&gt;This seems a rather frequent problem even in Loki and ubuntu 16.04: &lt;a href=&quot;https://askubuntu.com/q/762198/47206&quot;&gt;16.04 LTS wifi connection issues&lt;/a&gt; and it happened very often on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After following &lt;a href=&quot;https://askubuntu.com/a/768268/47206&quot;&gt;this answer&lt;/a&gt; it got less frequent I guess.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it says is:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Get details of your PCI wireless card by running &lt;code&gt;sudo lshw -class network&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Get your card model info according to the product line. For instance, as you can see in the question description it says &lt;code&gt;product:&#xA;  RTL8723BE PCIe Wireless Network Adapter&lt;/code&gt; so the model of my card is&#xA;  &lt;code&gt;RTL8723BE&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Open or create &lt;code&gt;/etc/pm/config.d/config&lt;/code&gt; and add &lt;code&gt;SUSPEND_MODULES=&quot;rtl8723be&quot;&lt;/code&gt;(replace rtl8723be with your own model&#xA;  number) Then run &lt;code&gt;echo &quot;options rtl8723be fwlps=N&quot; | sudo tee&#xA;  /etc/modprobe.d/rtl8723be.conf&lt;/code&gt; and reboot.&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It rarely happens now and when it does I use the command &lt;code&gt;service network-manager restart&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That can be associated with a shortcut key. I prefer a desktop launcher to run from Slingshot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/restart_wifi.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=urserver&#xA;Name=Restart Wifi&#xA;Type=Application&#xA;Exec=bash -c 'service network-manager restart'&#xA;Categories=Network;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-23T10:44:15.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10859" PostTypeId="2" ParentId="10856" CreationDate="2017-02-23T10:47:29.450" Score="1" Body="&lt;p&gt;This seems a rather frequent problem in ubuntu 16.04 on which Loki is based (&lt;a href=&quot;https://askubuntu.com/q/762198/47206&quot;&gt;askubuntu question: 16.04 LTS wifi connection issues&lt;/a&gt;) and it happened very often on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try other answers under that askubuntu question, but for me it got less frequent (I guess) after following &lt;a href=&quot;https://askubuntu.com/a/768268/47206&quot;&gt;this answer&lt;/a&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it says is:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Get details of your PCI wireless card by running &lt;code&gt;sudo lshw -class network&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Get your card model info according to the product line. For instance, as you can see in the question description it says &lt;code&gt;product:&#xA;  RTL8723BE PCIe Wireless Network Adapter&lt;/code&gt; so the model of my card is&#xA;  &lt;code&gt;RTL8723BE&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Open or create &lt;code&gt;/etc/pm/config.d/config&lt;/code&gt; and add &lt;code&gt;SUSPEND_MODULES=&quot;rtl8723be&quot;&lt;/code&gt;(replace rtl8723be with your own model&#xA;  number) Then run &lt;code&gt;echo &quot;options rtl8723be fwlps=N&quot; | sudo tee&#xA;  /etc/modprobe.d/rtl8723be.conf&lt;/code&gt; and reboot.&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It rarely happens now and when it does I use the command &lt;code&gt;service network-manager restart&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That can be associated with a shortcut key. I prefer a desktop launcher to run from Slingshot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/restart_wifi.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Icon=urserver&#xA;Name=Restart Wifi&#xA;Type=Application&#xA;Exec=bash -c 'service network-manager restart'&#xA;Categories=Network;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-23T10:47:29.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10862" PostTypeId="2" ParentId="10854" CreationDate="2017-02-23T13:10:03.783" Score="0" Body="&lt;p&gt;Without any further detail I can only assume these &quot;missing&quot; hard drives are not the ones elementary is installed on correct? Being that they are showing in in gparted leads me to believe that they just are being mounted. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/125257/how-do-i-add-an-additional-hard-drive&quot;&gt;This link my shed a little light on your issue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-02-23T13:10:03.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10865" PostTypeId="2" ParentId="10857" CreationDate="2017-02-23T17:39:41.183" Score="1" Body="&lt;p&gt;Most of your issues are &lt;a href=&quot;https://bugs.launchpad.net/wingpanel-indicator-bluetooth&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bugs&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the missing bluetooth icon on system settings... try installing it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2017-02-24T11:24:04.793" LastActivityDate="2017-02-24T11:24:04.793" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10866" PostTypeId="2" ParentId="10849" CreationDate="2017-02-23T17:46:54.617" Score="2" Body="&lt;p&gt;It's not possible to do it.&lt;br&gt;&#xA; Anyway, when you set your VLC volume over 100% that will also create distortion, so you will get the same effect if you set the general volume a little over 100%.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-02-23T17:46:54.617" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10867" PostTypeId="1" CreationDate="2017-02-23T18:04:13.263" Score="0" ViewCount="1683" Body="&lt;p&gt;I can create a newmode in display settings, but when I attempt to add the newly created mode to VGA, VGA1 or VGA-1, an error of output VGA, VGA1 or VGA-1 not found, is returned.  How do I solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="8736" LastEditorUserId="578" LastEditDate="2017-02-23T18:27:12.403" LastActivityDate="2024-03-20T12:06:15.793" Title="How to add new mode to xrandr?" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10868" PostTypeId="1" CreationDate="2017-02-23T18:06:03.057" Score="2" ViewCount="1269" Body="&lt;p&gt;I downloaded android studio on Loki (up-to-date) and it works fine for the most part. However, when I try creating a virtual device and run I get error messages about missing files. This is most likely because I didn't install the necessary 32-bit libraries for my 64-bit system. According to the &lt;a href=&quot;https://developer.android.com/studio/install.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;instrcutions&lt;/a&gt; on the android studio install page:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Required libraries for 64-bit machines:&lt;/strong&gt; &lt;br /&gt; &lt;br /&gt; If you are running a 64-bit&#xA;  version of Ubuntu, you need to install some 32-bit libraries with the&#xA;  following command: &lt;br /&gt; &lt;br /&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libc6:i386 libncurses5:i386 libstdc++6:i386 lib32z1 libbz2-1.0:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;When I run the given command, I get a message about a missing &lt;code&gt;libgcc1:i386&lt;/code&gt; which cannot be installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get the relevant 32 bit libraries on Loki?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;===EDIT===&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've enabled the &lt;code&gt;i386&lt;/code&gt; architecture with: &lt;code&gt;dpkg --add-architecture i386&lt;/code&gt; but that didn't help. Here's an output for the error messages for one of the packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;libc6:i386 : Depends: libgcc1:i386 but it is not going to be installed&#xA;libstdc++6:i386 : Depends: libgcc1:i386 (&amp;gt;= 1:4.2) but it&#xA;is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8116" LastEditorUserId="8116" LastEditDate="2017-02-23T19:05:03.270" LastActivityDate="2017-02-23T19:05:03.270" Title="How can I get android studio working in Loki with the required 32 bit libraries?" Tags="|release-loki|64-bit|android-studio|shared-libraries|32-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10869" PostTypeId="2" ParentId="10868" CreationDate="2017-02-23T18:24:34.497" Score="1" Body="&lt;p&gt;Try just &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libc6:i386 libncurses5:i386 libstdc++6:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Has worked flawlessly on many installs. Below is my full AS installation script if you needed more configuration, particularly KVM for hardware acceleration.  The source is from my complete setup script on &lt;a href=&quot;https://gist.github.com/sgpatterson13/b08352408e53dbc8f1bcf71ce51c1111&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub Gist&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;cd ~&#xA;sudo apt update -qq&#xA;sudo apt upgrade&#xA;&#xA;#enable ppa &#xA;&#xA;sudo apt install -yy software-properties-common python3-software-properties         &#xA;python-software-properties&#xA;&#xA;sudo apt install -yy libc6:i386 libncurses5:i386 libstdc++6:i386&#xA;&#xA;#install java JDK 8&#xA;&#xA;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt update -qq&#xA;sudo apt install -yy oracle-java8-installer&#xA;sudo apt install -yy oracle-java8-set-default&#xA;&#xA;#install android studio&#xA;&#xA;sudo apt-add-repository ppa:paolorotolo/android-studio&#xA;sudo apt update -qq&#xA;sudo apt install -yy android-studio&#xA;&#xA;#set up KVM for android emulator hardware acceleration - change &quot;username&quot;   &#xA;to your systems username&#xA;&#xA;sudo apt install -yy qemu-kvm libvirt-bin ubuntu-vm-builder bridge-utils    &#xA;virt-manager&#xA;sudo adduser username libvirtd &#xA;sudo adduser username kvm&#xA;&#xA;#trick to get emulator hardware acceleration to work properly&#xA;&#xA;cd ~/Android/Sdk/tools/lib64/libstdc++&#xA;mv libstdc++.so.6 libstdc++.so.6.bak&#xA;ln -s /usr/lib64/libstdc++.so.6 ~/Android/Sdk/tools/lib64/libstdc++&#xA;sudo apt -qq update&#xA;sudo apt install -yy mesa-utils&#xA;&#xA;#set home path&#xA;&#xA;export ANDROID_HOME=$HOME/Android/Sdk&#xA;export PATH=$PATH:$ANDROID_HOME/tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-23T18:34:35.780" LastActivityDate="2017-02-23T18:34:35.780" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10870" PostTypeId="1" AcceptedAnswerId="10871" CreationDate="2017-02-23T19:55:18.573" Score="3" ViewCount="1255" Body="&lt;p&gt;I want to remove the keyboard layout icon from the wingpanel, a white block which is useless for me in there.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9pikZ.jpg&quot; alt=&quot;image of my icons&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have already tried &lt;a href=&quot;http://howtoelementaryos.org/how-to-install-dconf-tools-in-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;DConf-Tools&lt;/a&gt; following the instructions given in this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2251/how-can-i-hide-the-keyboard-indicator-from-the-panel&quot;&gt;answer&lt;/a&gt;, yet I cannot make it work.&lt;/p&gt;&#xA;&lt;p&gt;Any help will be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="8649" LastEditorUserId="84" LastEditDate="2021-07-10T10:17:21.707" LastActivityDate="2021-07-10T10:17:21.707" Title="How can I remove the keyboard layout icon from the wingpanel?" Tags="|release-loki|release-juno|release-hera|wingpanel|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10871" PostTypeId="2" ParentId="10870" CreationDate="2017-02-23T20:36:26.050" Score="2" Body="&lt;p&gt;You can remove the keyboard indicator via the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge wingpanel-indicator-keyboard &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or via any package manager remove the &lt;code&gt;wingpanel-indicator-keyboard&lt;/code&gt; package.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-23T20:36:26.050" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10873" PostTypeId="2" ParentId="10854" CreationDate="2017-02-24T00:45:03.617" Score="1" Body="&lt;p&gt;It is likely that the ex_fat libraries are not installed.  Make sure you do this.  Hopefully this can be installed by default by eOS on the next version.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install exfat-fuse&#xA;sudo apt install exfat-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-02-24T00:45:03.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10874" PostTypeId="2" ParentId="10818" CreationDate="2017-02-24T01:27:35.057" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;having the controls inline with menu and other functions is straight-up confusing. More so when a piece of software doesn't support this; all of a sudden SOME programs have the controls inline, some don't. This is confusing.&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Consistency on the use of (GTK3) Headerbars is also a problem on other distros. Elementary cannot force whether apps will feature a Headerbar or a plain titlebar as those will depend on the app developer's discretion. I agree that some apps' Headerbars become confusing once the dev try to clutter the Headerbar with too much stuff but native elementary apps seems to be modest with just the essentials.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;switching corners for the controls isn't an issue for me; completely changing the paradigm of how they function is.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Historically, we have the close button to &lt;a href=&quot;http://design.canonical.com/2011/03/quit/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;quit&quot;&lt;/a&gt; an app but on both OSes, but some apps simply &quot;minimizes&quot; itself to the taskbar/dock, some even just remove the dock/taskbar icon but hide on the systemtray/menubar instead. &lt;a href=&quot;https://discussions.apple.com/thread/6630706?start=0&amp;amp;tstart=0&quot; rel=&quot;nofollow noreferrer&quot;&gt;OSX/macOS's unified fullscreen/zoom button is weird.&lt;/a&gt; There are some apps that throw the titlebar out of the window altogether and implements their own (*coughs* Steam). &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Why hide the minimize? This is a convention both other OSes use and people understand. Removing it just adds to the clutter of the desktop and does nothing to improve adoption.&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I did miss the minimize button for a while but I can always click on the dock icon to minimize it just like what I did to minimizeless windows I have on Windows.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;messing with the titlebar controls and UI standards from the two other main OSes makes no sense to me&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is actually no proper UI &lt;em&gt;standards&lt;/em&gt; coming from those &lt;em&gt;&quot;main&quot;&lt;/em&gt; OSes. But there is &lt;a href=&quot;https://www.freedesktop.org/wiki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;a set of real desktop standards&lt;/a&gt; that elementary adheres to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more info re:initially weird window control placement plus other things, they did provide their reasoning for such decisions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://web.archive.org/web/20160614115819/http://old.elementary.io/journal/whats-window-controls&quot; rel=&quot;nofollow noreferrer&quot;&gt;What's up with Window Controls?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://web.archive.org/web/20160507063754/http://old.elementary.io/journal/whats-still-window-controls&quot; rel=&quot;nofollow noreferrer&quot;&gt;What's (still) up with Window Controls?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Personally, switching between OSes (I have Windows 10, macOS, Arch+openbox, and elementary) has been confusing on the first few days but elementary have me use less clicks and keystrokes compared to others. Elementary, however, might not be simply everyone's cup of tea. You will always be free to install &lt;a href=&quot;https://distrowatch.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;any distro&lt;/a&gt; (or build your own) of your choice.&lt;/p&gt;&#xA;&#xA;&#xA;" OwnerUserId="686" LastEditorUserId="686" LastEditDate="2017-02-25T15:29:24.673" LastActivityDate="2017-02-25T15:29:24.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10877" PostTypeId="1" AcceptedAnswerId="10935" CreationDate="2017-02-24T08:19:39.897" Score="1" ViewCount="207" Body="&lt;p&gt;I am a new Linux user (deep breaths everyone) and I went through the guided install of Elementary OS Loki 0.4 alongside Win 10 somewhat successfully. The issue is that upon creating the new partitions for the file system I think that there have been some extra partitions thrown in. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I started with 125GB of free space on my HDD before the partitioning, although I was only able to adjust the amount of data for the separate OS and root partitions from only 100GB of free space. Using the file browser shows that there are in fact three devices named &lt;em&gt;file system, 20GB Volume&lt;/em&gt; and &lt;em&gt;30GB Volume&lt;/em&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;These extra partitions have only a few folders within that contain files (namely bin, root, dev and etc) of ~700MB each, so I'm not sure if these folders have important files on them or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I run Linux from a USB drive and remove these partitions if they are not important? I wouldn't mind some extra space for the root folder since I'm only left with 70GB of space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know if this is a known issue? Cheers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT - GParted shows that I have 3 of the ext4 partitions and one swap partition. All together these add up 27.97GB(/media/jackson/6b929d58-cea2-4e00-829d-9221249f11dc) + 18.70GB(/media/jackson/52c47ec7-fdab-410e-b2f6-520bac22485f) + 74.44GB(/) + 3.89GB(Swap) = 125GB.&lt;/p&gt;&#xA;" OwnerUserId="8742" LastActivityDate="2017-03-01T02:34:25.797" Title="Loki 0.4 - Guided Install Assigned Extra Partitions?" Tags="|release-loki|dual-boot|disk-management|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="10878" PostTypeId="2" ParentId="10867" CreationDate="2017-02-24T09:37:40.487" Score="0" Body="&lt;p&gt;By running xrandr you should see the connected monitors output with it's default resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It could by something else than the outputs that you tried.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For further info about how to add the resolution or how to make it permanent, check &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1112186&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; post!.  &lt;/p&gt;&#xA;" OwnerUserId="7625" LastEditorUserId="7625" LastEditDate="2017-02-24T13:14:17.933" LastActivityDate="2017-02-24T13:14:17.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10881" PostTypeId="1" AcceptedAnswerId="10884" CreationDate="2017-02-24T15:21:53.983" Score="1" ViewCount="1778" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2g018.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2g018.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;App center shows that is 5 updates. But when I push to update, I see information: Waiting for package manager lock &#xA;After while updating ends and I am on the start. I see 5 updates.&lt;/p&gt;&#xA;" OwnerUserId="8746" LastActivityDate="2017-02-24T17:26:54.243" Title="Problem with app center" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10882" PostTypeId="2" ParentId="10815" CreationDate="2017-02-24T16:07:19.857" Score="1" Body="&lt;p&gt;My computer no longer crashes but the elementary tweaks tool still does not show up anywhere. :( also when trying some of your commands the terminal said it couldn't locate elementary tweaks or something. (sorry I'm not very accurate, novice user here) &lt;/p&gt;&#xA;" OwnerUserId="8687" LastActivityDate="2017-02-24T16:07:19.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10884" PostTypeId="2" ParentId="10881" CreationDate="2017-02-24T17:14:57.427" Score="2" Body="&lt;p&gt;Sounds like you have another install process running. Do you have another package manager like Synaptic running? if nothing else is running try a reboot. Also try updating from the terminal rather than the app center: sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-02-24T17:26:54.243" LastActivityDate="2017-02-24T17:26:54.243" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10887" PostTypeId="1" CreationDate="2017-02-24T19:20:14.780" Score="1" ViewCount="135" Body="&lt;p&gt;I dual run Elementary on a Macbook Pro, but I typically use an external keyboard that has the standard non-Apple layout. I like having the layout (from left to right) &lt;kbd&gt;ctrl&lt;/kbd&gt; - &lt;kbd&gt;super&lt;/kbd&gt; - &lt;kbd&gt;alt&lt;/kbd&gt; but when I use the keyboard built-in to the laptop &lt;kbd&gt;super&lt;/kbd&gt; and &lt;kbd&gt;alt&lt;/kbd&gt; are swapped.&#xA;I would like it if, when I unplug the external keyboard, the &lt;kbd&gt;super&lt;/kbd&gt; and &lt;kbd&gt;alt&lt;/kbd&gt; keys get switched in regard to keyboard shortcuts. Does that make sense, and is that doable?&lt;/p&gt;&#xA;" OwnerUserId="8570" LastEditorUserId="16827" LastEditDate="2019-01-08T17:19:53.837" LastActivityDate="2019-01-08T17:19:53.837" Title="How to temporarily swap &lt;super&gt; and &lt;alt&gt; keys for keyboard shortcuts" Tags="|keyboard|keyboard-shortcuts|macbook|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10888" PostTypeId="1" CreationDate="2017-02-24T19:26:29.533" Score="0" ViewCount="173" Body="&lt;p&gt;Windows 7 gets started automatically even after installing elementary OS. In short I am not getting an option which OS I want to run/select.... windows 7 gets started automatically and I am non technical man.... I feel that linux is still not for common man, but only for technical person?&lt;/p&gt;&#xA;" OwnerUserId="8748" LastEditorDisplayName="user170" LastEditDate="2017-02-24T20:21:38.697" LastActivityDate="2018-07-20T19:11:43.550" Title="Windows 7 gets started automatically after installing elementary OS, I cannot see options to choose OS" Tags="|release-loki|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10889" PostTypeId="1" CreationDate="2017-02-24T19:44:36.343" Score="0" ViewCount="541" Body="&lt;p&gt;What is the keyboard shortcut to switch between terminal tabs? &lt;code&gt;Ctrl+PgDn/PgUp&lt;/code&gt; doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="8570" LastActivityDate="2017-02-24T19:48:13.030" Title="What is the keyboard shortcut to switch between terminal tabs?" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="2" ClosedDate="2017-02-26T01:26:12.283" ContentLicense="CC BY-SA 3.0" />
  <row Id="10890" PostTypeId="2" ParentId="10889" CreationDate="2017-02-24T19:48:13.030" Score="3" Body="&lt;p&gt;&lt;code&gt;Alt + &amp;lt;1-9&amp;gt;&lt;/code&gt; Jumps to first-ninth tab.&lt;/p&gt;&#xA;" OwnerUserId="6001" LastActivityDate="2017-02-24T19:48:13.030" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10891" PostTypeId="2" ParentId="10888" CreationDate="2017-02-24T20:21:06.647" Score="1" Body="&lt;p&gt;That shouldn't have happened; I am not sure that all went ok with your installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Installing and using Linux these days and especially ubuntu-based ones is easier than ever and easier than using Windows or Mac I think, but there are some settings during installation that you may have touched and changed in the wrong direction.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are sure elementaryOS was installed:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot from live usb&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair#Getting_Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot Repair&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Try: Recommended repair&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/86c1d.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/86c1d.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please report back.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-24T20:28:02.243" LastActivityDate="2017-02-24T20:28:02.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10893" PostTypeId="1" AcceptedAnswerId="10894" CreationDate="2017-02-24T20:42:36.553" Score="1" ViewCount="157" Body="&lt;p&gt;I know how to edit a contract file, but what command should be used with that?&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-24T20:48:57.010" LastActivityDate="2017-02-26T21:19:10.220" Title="Panthon Files context menu entry to set image as wallpaper" Tags="|pantheon-files|files|wallpaper|contract|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10894" PostTypeId="2" ParentId="10893" CreationDate="2017-02-24T20:48:43.057" Score="1" Body="&lt;p&gt;In fact in Loki it's already there. As indicated in the comment below the question.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You can find the corresponding contract in /usr/share/contractor&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-02-26T21:19:10.220" LastActivityDate="2017-02-26T21:19:10.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10897" PostTypeId="1" CreationDate="2017-02-24T22:07:49.660" Score="1" ViewCount="121" Body="&lt;p&gt;when connecting a 2nd monitor to my Late '08 Macbook Pro running Loki the system instantly slows down so the mouse pointer only moves really choppy  and then freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The 2nd screen is connected via VGA through the default Mini Displayport &amp;lt;-&gt; VGA Adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've updated to the 4.10 Mainline Kernel, but it didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any Ideas?&#xA;Thank you so much!&lt;/p&gt;&#xA;" OwnerUserId="8601" LastActivityDate="2017-03-07T12:55:17.983" Title="Connecting 2nd Monitor freezes Loki" Tags="|release-loki|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10899" PostTypeId="2" ParentId="10013" CreationDate="2017-02-25T13:29:27.090" Score="0" Body="&lt;p&gt;The title of your question was a bit contradictory (therefore I have edited it a bit), as there were multiple questions involved; you seem to prefer to disable the workspaces but also to give them a second chance if a better way to switch them was to be presented to you.&lt;/p&gt;&#xA;&lt;p&gt;As you have selected a definitive answer, I imagine that the most important part was how to disable them.&lt;/p&gt;&#xA;&lt;p&gt;But there is also the other question in the question body, as you say:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The only thing that's preventing me from using other workspaces&#xA;(besides the main one) is that I can't switch between them properly.&lt;/p&gt;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&lt;p&gt;Can I change any of these options?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;What would it be for you the proper way to switch between the workspaces?&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;The range of possibilities is large: see &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1479/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To simply cycle them, there is also &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To display them all and their windows I like &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt;. Only the windows of the selected workspace are displayed in this way (unlike  &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;W&lt;/kbd&gt; which shows all windows, including conkys, which is not too clever; that shortcut can be edited - I changed it to  &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; myself).&lt;/p&gt;&#xA;&lt;p&gt;The same can be achieved with a hot corner (e.g. 'Settings-Desktop-Hot corners', and setting down-left corner to Multitasking view.)&lt;/p&gt;&#xA;&lt;p&gt;When the multitasking view is displayed, &lt;strong&gt;the mouse or touchpad scroll&lt;/strong&gt; will switch the workspaces too.&lt;/p&gt;&#xA;&lt;p&gt;The use of the hot-corner and the wheel/scroll allows to &lt;strong&gt;switch workspaces only with the mouse or touchpad&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;That is very useful for me in selecting/closing windows especially when the dock is set to auto-hide.&lt;/p&gt;&#xA;&lt;p&gt;I use workspaces mostly when I run an application that I don't need too often (e.g. a script in a terminal that I need to monitor only rarely), or when I need to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10722/170&quot;&gt;cycle only the windows of the same application&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Any application gets its own separate workspace if set to fullscreen with &lt;kbd&gt;Super&lt;/kbd&gt;-&lt;kbd&gt;F&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You can edit a lot of shortcuts under &lt;em&gt;'Settings-Keyboard-Shortcuts-Workspaces'&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qtH83.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qtH83.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-25T13:58:40.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10900" PostTypeId="1" AcceptedAnswerId="11650" CreationDate="2017-02-25T17:39:10.710" Score="0" ViewCount="157" Body="&lt;p&gt;I'm running Loki with latest upgrades prior to Feb 25 2017. Some songs' names written in Cyrillic appear screwed. Interestingly, it doesn't apply to all Cyrillic names:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IK6Kl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IK6Kl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now these files with cryptic names in the Files app. Looks very normal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3DW02.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3DW02.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="8598" LastEditDate="2017-04-22T08:57:08.780" LastActivityDate="2017-04-22T08:57:08.780" Title="Noise music player font problem" Tags="|release-loki|music|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10902" PostTypeId="1" CreationDate="2017-02-26T04:49:11.037" Score="1" ViewCount="50" Body="&lt;p&gt;I have recently installed Elementary OS Loki on my laptop (Lenovo Thinkpad T450s), and I have two similar network printers at work and at home (Xerox Workcentre 6605 and 6506). At work I use a wired connection with predefined IP, but at home we have DHCP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Printer configuration at work went nicely, but at home there is no &lt;code&gt;Printers&lt;/code&gt; window. If I run the switchboard from the command line it get the following four messages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 22:29:37.111585] Application.vala:155: System Settings version: 2.0&#xA;[INFO 22:29:37.111620] Application.vala:157: Kernel version: 4.4.0-64-generic&#xA;&#xA;** (process:20056): CRITICAL **: string_contains: assertion 'self != NULL' failed&#xA;&#xA;** (process:20056): CRITICAL **: string_contains: assertion 'self != NULL' failed&#xA;**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, if I choose &lt;code&gt;Printers&lt;/code&gt;, I get the following two error messages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR:arraylist.c:957:gee_array_list_real_get: assertion failed: (index &amp;lt; _size)&#xA;Aborted (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&#xA;Rafael&lt;/p&gt;&#xA;" OwnerUserId="8755" LastActivityDate="2017-02-26T04:49:11.037" Title="Settings -&gt; Printers showing no window at home but does at work" Tags="|settings|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10905" PostTypeId="2" ParentId="10900" CreationDate="2017-02-26T13:29:16.027" Score="1" Body="&lt;p&gt;Looks like a mp3 tag coding issue in some files, you should ensure that all your mp3 tags are in utf-8.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-02-26T13:29:16.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10906" PostTypeId="2" ParentId="3762" CreationDate="2017-02-26T13:59:04.797" Score="0" Body="&lt;p&gt;You could also try. Helped with graphical abnormalities for me on an Intel 7200U with integrated graphics.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge xserver-xorg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="26" LastEditDate="2020-12-30T18:57:48.660" LastActivityDate="2020-12-30T18:57:48.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10908" PostTypeId="1" AcceptedAnswerId="10932" CreationDate="2017-02-26T16:42:24.330" Score="2" ViewCount="2375" Body="&lt;p&gt;I want to automatically start the telegram desktop client when I login. But it doesn't show there when I try to add it in Settings-Applications-Startup&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4cU2G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4cU2G.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But its desktop launcher file is in ~/.local/share/applications.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UWH09.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UWH09.png&quot; alt=&quot;menu starter&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Do I have to link the .desktop file somewhere?&lt;/p&gt;&#xA;" OwnerUserId="3980" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-02T11:21:05.030" Title="Add to Startup an application that is not showing" Tags="|applications|startup|app-shortcuts|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10909" PostTypeId="1" CreationDate="2017-02-26T20:34:41.107" Score="0" ViewCount="285" Body="&lt;p&gt;Just saw this this afternoon. Is there a problem with an update that's coming down?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0Smqi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0Smqi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2024-03-23T12:07:41.053" Title="Weird update error" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10910" PostTypeId="2" ParentId="10908" CreationDate="2017-02-26T20:51:04.597" Score="1" Body="&lt;p&gt;In some cases installed applications are not present in the available list of applications that can be added to the startup list, but you could just add the path to your application executable into the &quot;command box&quot; (the little box where you can add a custom command to run) &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/path/to/telegram-folder/Telegram --&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h4RNn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h4RNn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press enter and make sure it is ticked to run and you should be fine.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorDisplayName="user170" LastEditDate="2017-02-28T12:19:29.230" LastActivityDate="2017-02-28T12:19:29.230" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10911" PostTypeId="2" ParentId="10909" CreationDate="2017-02-27T06:17:45.470" Score="0" Body="&lt;p&gt;Do you have any alternative repositories (e.g. ppa for a particular software) active?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do, try disabling them and see if the error persists. Sometimes external ppa's don't come with authentication information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the error persists without external repositories, see if an &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;sudo apt update&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;gets rid of the error message and let us know anything you have found out.&lt;/p&gt;&#xA;" OwnerUserId="2354" LastEditorUserId="2354" LastEditDate="2017-02-27T07:59:56.510" LastActivityDate="2017-02-27T07:59:56.510" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10913" PostTypeId="2" ParentId="1264" CreationDate="2017-02-27T13:22:25.820" Score="2" Body="&lt;p&gt;I have just added my custom layout to the gui in elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add my custom layout I do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;edit existing xkb/symbols/ru file to add my layout there;&lt;/li&gt;&#xA;&lt;li&gt;edit evdev.xml file to add the appropriate variant there;&lt;/li&gt;&#xA;&lt;li&gt;edit &lt;strong&gt;evdev.lst&lt;/strong&gt; file to add the appropriate variant there;&lt;/li&gt;&#xA;&lt;li&gt;edit &lt;strong&gt;base.xml&lt;/strong&gt; file to add the appropriate variant there;&lt;/li&gt;&#xA;&lt;li&gt;edit &lt;strong&gt;base.lst&lt;/strong&gt; file to add the appropriate variant there;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;It seems, you don't do the steps #3,4,5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you try it and report back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I've made some testing and ready to say, that the layout definetely &lt;strong&gt;appears in the GUI&lt;/strong&gt; after editing evdev.xml AND evdev.lst.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The appropriate variant seems to be:&#xA;xkb_symbols &quot;&lt;strong&gt;alpha_arrows&lt;/strong&gt;&quot;&#xA;so one should add to evdev.lst the following line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alpha_arrows    gb: Doms l33t layout&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Editing base.xml and base.lst seems to be redundant and unnecessary. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT2:&lt;/strong&gt; Additionally, there &lt;strong&gt;seems to be an error in the initial guide&lt;/strong&gt;. One should add to the evdev.xml &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;layout&amp;gt;&#xA;  &amp;lt;configItem&amp;gt;&#xA;    &amp;lt;name&amp;gt;alpha_arrows&amp;lt;/name&amp;gt;&#xA;    &amp;lt;shortDescription&amp;gt;endom&amp;lt;/shortDescription&amp;gt;&#xA;    &amp;lt;description&amp;gt;Dom's l33t layout&amp;lt;/description&amp;gt;&#xA;    &amp;lt;languageList&amp;gt;&#xA;      &amp;lt;iso639Id&amp;gt;eng&amp;lt;/iso639Id&amp;gt;&#xA;    &amp;lt;/languageList&amp;gt;&#xA;  &amp;lt;/configItem&amp;gt;&#xA;  &amp;lt;variantList /&amp;gt;&#xA;&amp;lt;/layout&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/d0UW5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d0UW5.png&quot; alt=&quot;Screen of Custom Layout in the GUI&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8617" LastEditorUserId="8617" LastEditDate="2017-02-27T14:17:55.110" LastActivityDate="2017-02-27T14:17:55.110" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10914" PostTypeId="1" AcceptedAnswerId="10915" CreationDate="2017-02-27T14:00:05.937" Score="0" ViewCount="118" Body="&lt;p&gt;Can say the same thing for other distros. Clearly, I'm not that knowledgable in the Linux scene. They are completely reformatting / removing all datas anyway. They do it manually and it can't be just preference because doing a tutorial, the &quot;Erase Disk&quot; option is much simpler. (Yes I know the manual is easy to do but it is just adding more steps).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what gives? What is wrong with the &quot;Erase Disk and install X&quot;? The tut videos don't even explain, they just &quot;Don't go for &quot;Erase Disk&quot;, click &quot;Something Else&quot; then do this&quot;.&lt;/p&gt;&#xA;" OwnerUserId="8764" LastActivityDate="2017-02-28T08:45:24.643" Title="Why do installation guide videos always go for &quot;Something Else&quot; option and not the &quot;Erase Disk and Install Elementary&quot;" Tags="|system-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10915" PostTypeId="2" ParentId="10914" CreationDate="2017-02-27T14:08:39.313" Score="1" Body="&lt;p&gt;The &quot;something else&quot; option just gives you more refined control over your partition scheme. For example if you didn't want one single / partition but wanted to have a separate home partition or whatever. Also if you wanted to change the size of your swap partition or remove it completely. You can also change the default Ext4 to another type of file system via this method. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For beginners and those who don't need to do any manual configuration of partitions and file system the &quot;Erase Disk and Install Elementary&quot; is just fine. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-27T14:08:39.313" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10916" PostTypeId="1" AcceptedAnswerId="10917" CreationDate="2017-02-27T14:25:30.263" Score="2" ViewCount="435" Body="&lt;p&gt;I cannot accentuate vowels (or any other letter) in the chat of Skype using dead keys (in the Spanish keyboard-layout) as I do in other applications, where I type &quot;&lt;strong&gt;´&lt;/strong&gt;&quot; and then &quot;&lt;strong&gt;e&lt;/strong&gt;&quot;, resulting in &quot;&lt;strong&gt;é&lt;/strong&gt;&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Skype will appear &quot;´e&quot; instead of &quot;é&quot; . This is relevant because I frequently write in Spanish, a language in which accents are important.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is not with the system itself, nor the keyboard-layout, since I can accentuate in any other application, like for example in here áéíóú. Also, I believe it is not related with the language set for Skype, provided I tried out different possibilities.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: As indicated by @cipricus, this problem does not seem to be a &lt;code&gt;qt&lt;/code&gt; issue. Therefore this question is not a duplicate of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8100/how-to-use-the-compose-key-in-qt-apps&quot; title=&quot;How to use the compose key in Qt apps?&quot;&gt;How to use the compose key in Qt apps?&lt;/a&gt;, and the solution provided there (install the package &lt;code&gt;ibus-qt4&lt;/code&gt;) does not work in this case. See the comments by @cipricus for more information.&lt;/p&gt;&#xA;" OwnerUserId="8649" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-04-20T12:53:33.743" Title="Dead-keys not working in Skype" Tags="|release-loki|keyboard|keyboard-layout|skype|" AnswerCount="1" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="10917" PostTypeId="2" ParentId="10916" CreationDate="2017-02-27T16:24:15.180" Score="3" Body="&lt;p&gt;I can confirm your problem with all keyboard layouts that use &lt;a href=&quot;https://en.wikipedia.org/wiki/Dead_key&quot; rel=&quot;nofollow noreferrer&quot;&gt;dead-keys&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Spanish layout uses dead keys to type certain characters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you say in a comment:    &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I type &quot; ´ &quot; and then &quot; e &quot;, resulting in &quot; é &quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;My favorite solution is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install language-selector-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From Applications/Slingshot launch 'Language Support'  (&lt;code&gt;gnome-language-selector&lt;/code&gt; - part of &lt;code&gt;language-selector-gnome&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Set 'Keyboard method input system' to 'XIM'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ry89q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ry89q.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and back.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This problem seems partially related to this askubuntu question: &lt;a href=&quot;https://askubuntu.com/q/774237/47206&quot;&gt;Dead keys (accents) stopped working after upgrading to Ubuntu 16.04&lt;/a&gt; and even to &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/ibus/+bug/335732&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt; which refers to Spanish, with the notable difference that here only Skype is affected.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As indicated &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2135167&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, this may seem related to a more general problem affecting Qt applications. Trying the solution thereunder (install and run &lt;code&gt;qtconfig-qt4&lt;/code&gt;, go to the Interface tab,under Default Input Method, select ibus) it doesn't seem to work. (Initially only  &lt;code&gt;xim&lt;/code&gt; is available there, not &lt;code&gt;ibus&lt;/code&gt;; but that option appears after installing &lt;code&gt;ibus-qt4&lt;/code&gt;. Enabling that option doesn't fix our problem though.) - Possibly this is not a &lt;code&gt;qt&lt;/code&gt; issue.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There seems to be a temporary fix indicated in the answer under the askubuntu linked question that says to open a terminal and type &lt;code&gt;ibus-setup&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did that and got this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vHbrf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vHbrf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I pressed Yes and got this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/b5Syb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b5Syb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As those settings doesn't seem available in elementary, I just went to Skype and now the dead keys work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But only before logout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems the ibus service is installed but elementary doesn't need that, while Skype needs it. You can start it with your session  (according to &lt;a href=&quot;https://askubuntu.com/q/135548/47206&quot;&gt;How to add iBus to start up applications?&lt;/a&gt;) by going to Settings-Applications-Startup, press the plus in the left down corner and add the command &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ibus-daemon --xim&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Adding just &lt;code&gt;ibus-daemon&lt;/code&gt; as indicated in another answer under that linked question doesn't fix it.).&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-02-27T23:17:50.203" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10918" PostTypeId="1" CreationDate="2017-02-27T17:30:16.717" Score="6" ViewCount="971" Body="&lt;p&gt;I know this is a spread out problem out there. 3 days ago i installed el os (loki) on my computer and i noticed that after suspension, when i had a wake up the screen remained black. no pointer, anything, moreover the screen power button shows me a red light (like there's no signal). I've looked for out there and some of the solutions i found don't work (typing password, ctrl alt f1, f7 or something like that).&#xA;Any advice?&lt;/p&gt;&#xA;" OwnerUserId="8766" LastActivityDate="2018-12-26T06:01:00.393" Title="Black screen after wake up" Tags="|release-loki|suspend|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10919" PostTypeId="2" ParentId="9827" CreationDate="2017-02-27T18:38:39.433" Score="4" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Playonlinux&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select 'Configure' &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select your virtual drive (e.g. Office2007)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Under 'General' tab click 'Make a new shortcut for this virtual drive'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the icon you want (e.g. WINWORD.EXE) and press next&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Give it a name (let's say MSWord)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Close Playonlinux.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look in $HOME for &lt;code&gt;MSWord.desktop&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy that to &lt;code&gt;~/.local/share/applications&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select a &lt;code&gt;.docx&lt;/code&gt; file (or what you need), right-click, 'Properties', 'Open with', Other application, 'Show all applications', look for &lt;strong&gt;MSWord&lt;/strong&gt;. ('Set as default' should be enabled.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If the desktop file has no proper icon, look for it in &lt;code&gt;~/.PlayOnLinux/icones/full_size&lt;/code&gt;. Copy it to &lt;code&gt;~/.local/share/icons&lt;/code&gt; and rename it so as to add the png extension (e.g. &lt;code&gt;winword.png&lt;/code&gt;) then edit the &lt;code&gt;Icon&lt;/code&gt; line of the desktop file (e.g. &lt;code&gt;Icon=winword&lt;/code&gt;). Other lines that are worth editing are maybe:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Name=Microsoft Office Word;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Categories=Office;WordProcessor;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-04-04T23:03:12.677" LastActivityDate="2017-04-04T23:03:12.677" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10921" PostTypeId="1" CreationDate="2017-02-28T00:50:46.843" Score="3" ViewCount="484" Body="&lt;p&gt;This has happened with a few applications but for example, I have have Slack installed but when I get a notification, it shows up as being from RubyMine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R1LFE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R1LFE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm curious why these aren't being properly identified by the OS. Is it merely an issue with the .desktop files? For reference:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Slack&#xA;Comment=Slack Desktop&#xA;GenericName=Slack Client for Linux&#xA;Exec=/usr/bin/slack --disable-gpu %U&#xA;Icon=/usr/share/pixmaps/slack.png&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=GNOME;GTK;Network;InstantMessaging;&#xA;MimeType=x-scheme-handler/slack;&#xA;&#xA;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=RubyMine&#xA;Icon=/home/my_user/apps/RubyMine-2016.2.3/bin/RMlogo.svg&#xA;Exec=&quot;/home/my_user/apps/RubyMine-2016.2.3/bin/rubymine.sh&quot; %f&#xA;Comment=The Drive to Develop&#xA;Categories=Development;IDE;&#xA;Terminal=false&#xA;StartupWMClass=jetbrains-rubymine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8321" LastActivityDate="2017-02-28T00:50:46.843" Title="Notifications are being identified as the wrong application" Tags="|icons|notifications|" AnswerCount="0" CommentCount="6" ClosedDate="2017-11-11T19:41:30.397" ContentLicense="CC BY-SA 3.0" />
  <row Id="10922" PostTypeId="1" CreationDate="2017-02-28T03:08:22.907" Score="2" ViewCount="2981" Body="&lt;p&gt;Not sure what happened but now when I try to boot in to elementary OS I get a KDE plasma (I think?) loading screen and then an error. I was using my laptop at work and hadn't changed anything. I get home and boot it up and now this is happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jwrjJ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jwrjJ.jpg&quot; alt=&quot;Screen 1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/94CZX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/94CZX.jpg&quot; alt=&quot;Screen 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8651" LastEditorUserId="308" LastEditDate="2018-08-07T16:56:37.520" LastActivityDate="2018-08-07T16:56:37.520" Title="elementary OS booting in to KDE Plasma desktop" Tags="|boot|desktop|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="10923" PostTypeId="2" ParentId="10914" CreationDate="2017-02-28T08:45:24.643" Score="0" Body="&lt;p&gt;If you have a previously loaded Ubuntu which is common for distro hoppers.  it will give you an option to delete the previous partition of ubuntu and install a fresh copy.  This is preferred if you have a dual boot windows.  One of my friends deleted windows this way.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Choosing this method will delete your home directory.  I usually opt for this installation, copy/save my home directory beforehand and then copy it back after the install.  All software will be deleted as well and must be re-installed.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-02-28T08:45:24.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10924" PostTypeId="1" AcceptedAnswerId="10988" CreationDate="2017-02-28T09:17:21.150" Score="2" ViewCount="581" Body="&lt;p&gt;this is my first experience on Elementary OS and I'm pretty new to Linux/Ubuntu. I find my way around pretty easily with Google at my fingertips. Somehow I could not find any sources about the following case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Elementary OS on my SSD (full drive, EXT4).&#xA;I also have 6 HDD that I configured as a RAID-Z zpool and setup a zfs filesystem on top of that zpool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Somehow, I configured the mount option to be /data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is I would like this &quot;drive&quot; to appear as a &quot;partition&quot; under the &lt;em&gt;Devices&lt;/em&gt; section in the sidebar of the pantheon-files application.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/i8ro5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i8ro5.png&quot; alt=&quot;pantheon-files&quot;&gt;&lt;/a&gt;&#xA;I would like it right under &quot;File System&quot; since it's an actual drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for your help.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I agree that the questions are similar, after re-reading it. But there is not a really satisfactory answer since the only answer is as follow.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Actually none of the partitions mounted permanently (except the / partition) shows up in this Devices list, only external USB or network drives. This seems to be a limitation of the underlying software library.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;But in my case, I can see that I also have a mounted drive (&lt;em&gt;PHOTOARCHIVE&lt;/em&gt;), which is in a SATA dock connected directly to my motherboard (so not USB). That means the answer is either wrong or incomplete since my hard drive appears there. By the way, that drive was mounted under &lt;strong&gt;/media/{username}/PHOTOARCHIVE/&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before I can say an answer is valid, it has to actually tell me something more than &quot;not possible&quot;. Is there something I can do to test? If it is a limitation of the underlying software library, could I know which one(s). That way I could investigate / broaden my search and maybe open a bug report in the correct project.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="8726" LastEditorUserId="8726" LastEditDate="2017-02-28T22:30:37.573" LastActivityDate="2017-03-31T20:02:03.247" Title="Load ZFS Partition under Devices" Tags="|release-loki|pantheon-files|mount|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10926" PostTypeId="1" CreationDate="2017-02-28T10:13:56.797" Score="-2" ViewCount="202" Body="&lt;p&gt;The &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; does not install updates. And when I used the terminal to update it gave me this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update  &#xA;Hit:1 http://au.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://au.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                                                     &#xA;Hit:3 http://au.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                                                   &#xA;Get:4 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]                                                       &#xA;Hit:5 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Hit:6 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease     &#xA;Fetched 102 kB in 2s (46.0 kB/s)                              &#xA;E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am not sure what to do, any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I am not quite sure why when I use the Shift key to change cases, I have to push the key I want twice.&lt;/p&gt;&#xA;" OwnerUserId="8773" LastEditorUserId="16827" LastEditDate="2019-01-09T10:47:51.220" LastActivityDate="2019-01-09T10:48:05.450" Title="AppCenter not installing updates" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="10927" PostTypeId="2" ParentId="10926" CreationDate="2017-02-28T11:07:22.100" Score="1" Body="&lt;p&gt;Ok, so I figured out a that I just needed to do the command it told me to. Wow what a surprise!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;fixed everything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I still have the problem with the shift key though.&lt;/p&gt;&#xA;" OwnerUserId="8773" LastEditorUserId="16827" LastEditDate="2019-01-09T10:48:05.450" LastActivityDate="2019-01-09T10:48:05.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10928" PostTypeId="2" ParentId="10908" CreationDate="2017-02-28T12:46:21.490" Score="0" Body="&lt;p&gt;I think the way to do it is to add the path to the executable, as indicated in the other answer, or add the command &lt;code&gt;gtk-launch desktop-file-name&lt;/code&gt; (where &quot;desktop-file-name&quot; is the name of your .desktop file in &lt;code&gt;~/.local/share/applications&lt;/code&gt;) after installing &lt;code&gt;gtk-launch&lt;/code&gt; (more &lt;a href=&quot;https://askubuntu.com/a/664272/47206&quot;&gt;here&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, as you posted yourself:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;linking the .desktop file to ~/.config/autostart&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;A question on startup locations: &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10929/170&quot;&gt;Settings-Applications-Startup list versus ~/.config/autostart&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-02T11:21:05.030" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10929" PostTypeId="1" AcceptedAnswerId="10931" CreationDate="2017-02-28T12:53:39.467" Score="2" ViewCount="570" Body="&lt;p&gt;The author of &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10908/170&quot;&gt;this&lt;/a&gt; question states in a comment that he solved the problem of adding an app to startup by linking its desktop file to &lt;code&gt;~/.config/autostart&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to test that I see on my system a big difference between what's there and what really is auto-starting on my system, as some of the apps there are not in the startup list at all, some are disabled, and one app is auto-starting (pcmanfm daemon) without being there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OLWDE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OLWDE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What does this mean? Is  &lt;code&gt;~/.config/autostart&lt;/code&gt; obsolete?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I delete all desktop files there, the startup list is also emptied.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How does it work? &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-03-03T13:00:29.080" Title="Settings-Applications-Startup list versus ~/.config/autostart" Tags="|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10930" PostTypeId="2" ParentId="10922" CreationDate="2017-02-28T13:09:03.287" Score="1" Body="&lt;p&gt;Most probably a KDE package including desktop was installed on that system but that is not working normally.&lt;/p&gt;&#xA;&lt;p&gt;It also seems that (however faulty) the KDE desktop is the one selected first.&lt;/p&gt;&#xA;&lt;h3&gt;If your elementary desktop and the lightdm greater are still in place:&lt;/h3&gt;&#xA;&lt;p&gt;You should try to boot into the elementary desktop. When more desktop environments are installed you should see a gears button at the login screen (upper-right of the password field).&lt;/p&gt;&#xA;&lt;p&gt;Go to the login screen and see if that button is available.&lt;/p&gt;&#xA;&lt;p&gt;If you cannot logout and/or you cannot get to the login screen:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Hit ctrl+alt+F1 to go to a tty prompt&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;you may need to enter username and password; enter  &lt;code&gt;sudo killall lightdm&lt;/code&gt; - that should restart the login greater; to start it manually enter &lt;code&gt;sudo lightdm&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-02-28T13:32:39.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10931" PostTypeId="2" ParentId="10929" CreationDate="2017-02-28T14:00:42.180" Score="2" Body="&lt;p&gt;There are different places from where stuff is autostarted. There are &lt;code&gt;/etc/xdg/autostart&lt;/code&gt; and &lt;code&gt;~/.config/autostart&lt;/code&gt; that I know of.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the stuff, that's not shown in the Startup list is in &lt;code&gt;/etc/xdg/autostart&lt;/code&gt; probably.&#xA;And the apps that are in the settings list are probably in &lt;code&gt;~/.config/autostart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.config/autostart&lt;/code&gt; is for applications that only start on login of the current user, while the ones from &lt;code&gt;etc/xdg/autostart&lt;/code&gt; are started for every one.&lt;/p&gt;&#xA;" OwnerUserId="3980" LastEditorUserId="3980" LastEditDate="2017-03-03T13:00:29.080" LastActivityDate="2017-03-03T13:00:29.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10932" PostTypeId="2" ParentId="10908" CreationDate="2017-02-28T14:05:01.837" Score="1" Body="&lt;p&gt;I got it working by linking the .desktop file to ~/.config/autostart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I still think it's a bit confusing that the app list in that specific settings page is different than what is shown in the application starter.&lt;/p&gt;&#xA;" OwnerUserId="3980" LastActivityDate="2017-02-28T14:05:01.837" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10933" PostTypeId="2" ParentId="95" CreationDate="2017-02-28T17:34:38.797" Score="2" Body="&lt;p&gt;UKUU is a good GUI based tool for managing kernels&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-add-repository -y ppa:teejee2008/ppa&#xA; sudo apt update&#xA; sudo apt install ukuu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-02-28T17:34:38.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10934" PostTypeId="1" CreationDate="2017-02-28T18:42:25.063" Score="2" ViewCount="1299" Body="&lt;p&gt;I have a problem, I cannot open Files as administrator by right-clicking the dock-icon and selecting 'New Window as administrator'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is that a bug or is it just affecting me? It works OK with Nautilus.&lt;/p&gt;&#xA;" OwnerUserId="8779" LastEditorDisplayName="user170" LastEditDate="2017-03-01T14:04:34.230" LastActivityDate="2017-03-01T14:04:34.230" Title="cannot open Files in administrator mode" Tags="|pantheon-files|" AnswerCount="1" CommentCount="2" ClosedDate="2017-04-01T21:15:19.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="10935" PostTypeId="2" ParentId="10877" CreationDate="2017-03-01T02:34:25.797" Score="0" Body="&lt;p&gt;&lt;em&gt;Copying the answer from the comments since we seem to find the cause of extra partitions.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I did have attempt installs which ran into errors (twice I think - Possibly why there are two extra partitions?) before re-writing the .iso files to the usb drive and finally getting through the install. If that explains the extra partitions, should I be free to delete those partitions or should I boot from the usb drive before attempting that?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Yes, that's probably the reason. If you have no important files on your Linux partitions and want a fresh start, feel free to delete all those partitions except for the Windows ones (be careful not to delete the Windows system/boot partitions).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use the Windows's Disk Management tool if you're more familiar with it (plus gives the extra protection from deleting Windows boot partitions). Elementary can handle anything the Disk Management tool throws at it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-03-01T02:34:25.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10936" PostTypeId="1" CreationDate="2017-03-01T06:28:38.283" Score="2" ViewCount="3250" Body="&lt;p&gt;I wanted to connect by headphones to my laptop using Bluetooth but i can't find the Bluetooth settings in the system settings. Even when i toggle the Bluetooth from wingpanel  i couldn't find my device( from another device like smartphone). Kindly guide me through the process.&lt;/p&gt;&#xA;" OwnerUserId="8787" LastActivityDate="2020-03-21T06:04:23.003" Title="I couldn't find the Bluetooth settings in loki" Tags="|settings|bluetooth|sharing|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10937" PostTypeId="2" ParentId="10936" CreationDate="2017-03-01T06:38:54.940" Score="0" Body="&lt;p&gt;I have exactly the same problem and I asked it before here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now there is no Bluetooth settings icon in System Settings and turning Bluetooth from wingpanel icon doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try this command to revive icon in system settings:&#xA; 'sudo apt install switchboard-plug-bluetooth' &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However it didn't work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can turn your Bluetooth via terminal with&#xA;'bluetooth on' command and then try connecting to device with settings that you can open from wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that it's not solution for your problem, but right now it seems to be the only way to use bluetooth devices.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-03-01T06:38:54.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10938" PostTypeId="2" ParentId="2515" CreationDate="2017-03-01T08:43:32.020" Score="3" Body="&lt;p&gt;I'm working in my free time to build a eBook reader for elementary OS - Bookworm. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently it's in a very early stage and very much work in progress. However, currently it can open eBooks and supports adding and removing books from the library. Here is the install instructions if you would like to try it. Suggestions and feature requests are more than welcome ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/babluboy/bookworm/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/babluboy/bookworm/blob/master/README.md&lt;/a&gt;!&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2017-03-01T08:43:32.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10939" PostTypeId="2" ParentId="10936" CreationDate="2017-03-01T09:34:10.873" Score="2" Body="&lt;p&gt;I remember seeing it in the system settings applet, but not anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try installing this application&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install bluman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is the standard ubuntu application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best of luck!&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2020-03-21T06:04:23.003" LastActivityDate="2020-03-21T06:04:23.003" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="10940" PostTypeId="2" ParentId="10934" CreationDate="2017-03-01T11:27:44.787" Score="3" Body="&lt;p&gt;This is a known regression caused be a recent update.  A fix has been committed and should be released soon.  In the meanwhile using sudo pantheon-files in a terminal will work.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-03-01T11:27:44.787" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10941" PostTypeId="2" ParentId="10924" CreationDate="2017-03-01T11:43:36.600" Score="2" Body="&lt;p&gt;I do not have experience of zfs RAID drives but if the underlying system can handle it and it is mountable when you boot/log in then a suitable entry in /etc/fstab should allow it to appear as a device in Files.    For example this line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;//192.168.0.16/Anonymous  /media/jeremy/Anonymous cifs   guest,uid=1000    0   0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mounts a samba server as a device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general format is |device|  |mount location|  |filetype|  |other parameters ....|&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may need to Google a bit to determine the correct line to add (remember to back up the existing file!).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to specify either UUID or device ID  (e.g. /dev/sdc1) and create a folder under /media/username/ where it can be mounted.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-03-01T11:43:36.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10945" PostTypeId="2" ParentId="9936" CreationDate="2017-03-01T14:32:40.507" Score="0" Body="&lt;p&gt;There are various forms of this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/1382/170&quot;&gt;Wifi problems after restart or suspend&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/10856/170&quot;&gt;Wifi down after waking up from a long suspend&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/10289/170&quot;&gt;WIFI sometimes not working&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Losing wifi connection is a Ubuntu 16.04 wifi issue: &lt;a href=&quot;https://askubuntu.com/q/762198/47206&quot;&gt;16.04 LTS wifi connection issues&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The change of icon is related to that too - but the form of the icon may vary depending on the icon-set.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It became a rare occurrence for me after I did this: &lt;a href=&quot;https://askubuntu.com/a/768268/47206&quot;&gt;https://askubuntu.com/a/768268/47206&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it still happens I do  &lt;code&gt;service network-manager restart&lt;/code&gt; (asks for password anyway). That command can be run from a shortcut or added into a &lt;code&gt;~/.local/share/applications/restart-wifi.desktop&lt;/code&gt; file and run from slingshot.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-01T14:32:40.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10946" PostTypeId="1" CreationDate="2017-03-01T14:40:58.580" Score="0" ViewCount="48" Body="&lt;p&gt;i have 2 issues to my elementary Os. The first is the double icon of &quot;file&quot; in my menù,that redirect both to &quot;Home&quot; folder. The second one is the strange icon that appears in the top of my desktop(before IT). Can someone help me?&lt;a href=&quot;https://i.stack.imgur.com/NHBoj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NHBoj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZUuMT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZUuMT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8792" LastActivityDate="2017-03-01T20:52:44.040" Title="Double File folder and strange simbol on the top" Tags="|folder|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10947" PostTypeId="1" CreationDate="2017-03-01T14:47:18.830" Score="1" ViewCount="179" Body="&lt;p&gt;Before updating the size of the file manager windows might be smaller.&#xA;The problem is more visible on the other skins, e.g. Arc Theme.&#xA;It is a way to remove this restriction?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshot presents the pasted image with the previous smallest window size&lt;a href=&quot;https://i.stack.imgur.com/VaJyj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VaJyj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8793" LastEditorUserId="578" LastEditDate="2017-03-02T07:16:37.743" LastActivityDate="2017-03-06T19:25:36.320" Title="How to reduce &quot;Files&quot; 0.3.2 window size?" Tags="|release-loki|pantheon-files|window-management|pantheon|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10949" PostTypeId="1" AcceptedAnswerId="10969" CreationDate="2017-03-01T17:42:29.750" Score="1" ViewCount="8537" Body="&lt;p&gt;I have an AppImage executable file which I need to run on startup. I have given the file permissions to execute, it is currently 764. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To open the application from terminal, I just the type the path, and it starts. I entered this path as a Custom Command in Settings-&gt;Applications-&gt;Startup . But it doesn't open on startup. How do i do this?&lt;/p&gt;&#xA;" OwnerUserId="8796" LastActivityDate="2017-03-02T17:30:19.330" Title="Run AppImage on Startup" Tags="|settings|applications|startup|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10950" PostTypeId="2" ParentId="10946" CreationDate="2017-03-01T18:23:44.433" Score="3" Body="&lt;p&gt;Elementary has no icons on the desktop, like yours, so you should have installed another file manager, such as Nautilus or Nemo. This is the reason for two icons for files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the second question,  you should have installed Dropbox,  so take a look at :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;dropbox for elementary os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2017-03-01T20:52:44.040" LastActivityDate="2017-03-01T20:52:44.040" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="10952" PostTypeId="1" AcceptedAnswerId="10955" CreationDate="2017-03-01T21:36:49.027" Score="2" ViewCount="4835" Body="&lt;p&gt;In the latest update of Files, all .desktop files aren't executed by left-click by default (eg. all files in &lt;code&gt;~/.local/share/applications&lt;/code&gt; directory). They are opened in Scratch instead. I understand why this happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason is described here:&#xA;&lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-february-aa39cc526498#.r3zeyns1l&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/loki-updates-for-february-aa39cc526498#.r3zeyns1l&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But now, I can't find any option to execute these files using the Files. There is no option like &quot;Run application&quot; or something like that.&#xA;Of course, I can still run application using the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I overlooking something or it is intended as a feature?&lt;/p&gt;&#xA;" OwnerUserId="8620" LastEditorDisplayName="user170" LastEditDate="2017-03-02T14:30:47.060" LastActivityDate="2017-03-02T14:30:47.060" Title="How to execute .desktop in Files" Tags="|release-loki|files|app-shortcuts|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="10953" PostTypeId="1" CreationDate="2017-03-01T22:18:15.550" Score="2" ViewCount="4054" Body="&lt;p&gt;I would like to remove COMPLETLY the nvidia drivers, and only use the intel GPU. How can i do that?&#xA;I tried &lt;code&gt;sudo apt remove nvidia-*&lt;/code&gt; and installed &lt;code&gt;xserver-xorg-video-intel&lt;/code&gt;. But it all came to the same conclusion: the nvidia GPU was still being used. &#xA;PC:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-i7 6700QH&#xA;-gtx1060&#xA;-8gb DDR4&#xA;-MSI GP62MVR-6RF&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8797" LastEditorUserId="578" LastEditDate="2017-03-02T07:21:33.783" LastActivityDate="2019-05-24T09:34:56.117" Title="Remove Nvidia Drivers" Tags="|graphic-drivers|drivers|graphics|nvidia|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10954" PostTypeId="2" ParentId="5074" CreationDate="2017-03-01T22:45:48.570" Score="4" Body="&lt;p&gt;This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First install the following dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git intltool libtool network-manager-dev libnm-util-dev libnm-glib-dev libnm-glib-vpn-dev libnm-gtk-dev libnm-dev libnma-dev ppp-dev libdbus-glib-1-dev libsecret-1-dev libgtk-3-dev libglib2.0-dev xl2tpd strongswan libnss3-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Issue the following on the command-line (note: the backslash character \ is the shell line continuation character which can safely be copy and pasted):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/nm-l2tp/network-manager-l2tp.git&#xA;cd network-manager-l2tp&#xA;autoreconf -fi&#xA;intltoolize&#xA;&#xA;./configure \&#xA;  --disable-static --prefix=/usr \&#xA;  --sysconfdir=/etc --libdir=/usr/lib/x86_64-linux-gnu \&#xA;  --libexecdir=/usr/lib/NetworkManager \&#xA;  --localstatedir=/var \&#xA;  --with-pppd-plugin-dir=/usr/lib/pppd/2.4.7&#xA;&#xA;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;source: &lt;a href=&quot;https://askubuntu.com/questions/789421/l2tp-ipsec-psk-vpn-client-on-xubuntu-16-04&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8798" LastEditorUserId="19060" LastEditDate="2019-10-01T17:42:31.827" LastActivityDate="2019-10-01T17:42:31.827" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="10955" PostTypeId="2" ParentId="10952" CreationDate="2017-03-01T23:45:07.130" Score="2" Body="&lt;p&gt;As indicated in the comment by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/7492/pretzel-jones&quot;&gt;PretzelJones&lt;/a&gt; you don't need to run those files like that, as they can be launched from Slingshot if you put them in &lt;code&gt;~/.local/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;h3&gt;Even more, as &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-february-aa39cc526498#.em87gl6ct&quot; rel=&quot;nofollow noreferrer&quot;&gt;explained here by the developer&lt;/a&gt; the change is intended to avoid &lt;a href=&quot;https://www.reddit.com/r/linux/comments/5r6va0/how_to_easily_trick_file_manager_users_to_execute/&quot; rel=&quot;nofollow noreferrer&quot;&gt;file manager being tricked into executing arbitrary code&lt;/a&gt;: therefore, &lt;strong&gt;use the below solutions with caution, especially the one intended to execute the desktop file without asking by just clicking (solution no 1), and favor solution 3&lt;/strong&gt;.&lt;/h3&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;So, if you have some files in &lt;code&gt;~/.local/share/applications&lt;/code&gt; or other places that you must or want to run from Files for any reason, there must be different ways to do it, and the most obvious is to &lt;strong&gt;use other file managers&lt;/strong&gt; to handle the &lt;code&gt;.desktop&lt;/code&gt; files through Pantheon Files, either&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;by creating a &lt;code&gt;~/.local/share/applications/run-desktop.desktop&lt;/code&gt; file and make that &amp;quot;application&amp;quot; the default for &lt;code&gt;.desktop&lt;/code&gt; files and thus &lt;strong&gt;executing them as before with one or double click&lt;/strong&gt;, or&lt;/li&gt;&#xA;&lt;li&gt;by creating a &lt;code&gt;contract&lt;/code&gt; file to &lt;strong&gt;add a special context menu entry in Pantheon Files&lt;/strong&gt; or, even better&lt;/li&gt;&#xA;&lt;li&gt;by creating a &lt;code&gt;~/.local/share/applications/run-or-edit.desktop&lt;/code&gt; file (also using a &lt;code&gt;zenity&lt;/code&gt; script), making that &amp;quot;application&amp;quot; the default for &lt;code&gt;.desktop&lt;/code&gt; files and thus &lt;strong&gt;getting a pop-up window asking if you want to run or edit&lt;/strong&gt; that file.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I have both Thunar and PCManFM installed, and they are both light enough, coming with no supplementary dependencies. (These file managers could be used directly when dealing with the desktop files, and not through Pantheon Files, but that's another matter.)&lt;/p&gt;&#xA;&lt;p&gt;So:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pcmanfm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install thunar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;1. To run  &lt;code&gt;.desktop&lt;/code&gt; files by double click&lt;/strong&gt; without asking - by changing the default application for that type of files (&lt;strong&gt;the less safe solution&lt;/strong&gt;):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/run-desktop.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Icon=system-file-manager&#xA;Name=PCManFM to Run desktop file&#xA;Categories=System;FileTools;FileManager;Utility;Core;GTK;&#xA;Exec=pcmanfm %f&#xA;Terminal=false&#xA;MimeType=application/x-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then make it executable:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod a+x ~/.local/share/applications/run-desktop.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(or maybe you could try my option &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10352/170&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;p&gt;Then, selecting any &lt;code&gt;.desktop&lt;/code&gt; file, right-click, 'Properties', and under 'Open with' select that new &amp;quot;application&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VPbjw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VPbjw.png&quot; alt=&quot;setting for running desktop files&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;You should consider the fact that the above is risky, as already indicated&lt;/strong&gt;, while the solutions below are safer.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;2. To add a context menu entry in Files to execute desktop files&lt;/strong&gt; by creating a contract file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/run_desktop_launcher.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Run the desktop file&#xA;MimeType=application/x-desktop&#xA;Exec=pcmanfm %f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and you should see the &amp;quot;Run&amp;quot; right-click custom menu:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2WF1g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2WF1g.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;(To make that context menu option show a &amp;quot;Run or edit&amp;quot; option instead of simply running the file: replace the line &lt;code&gt;Exec=pcmanfm %f&lt;/code&gt; with &lt;code&gt;Exec=bash -c '/path/to/your/scripts/location/run_or_edit_.sh %f'&lt;/code&gt; according to the the next solution below.)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3. To get a pop-up window asking you to chose between run or edit (safest option)&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install zenity&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit /path/to/your/scripts/location/run_or_edit_.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;add this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;zenity --question --text=&amp;quot;What to do?&amp;quot; \&#xA;       --ok-label=Run \&#xA;       --cancel-label=Edit&#xA;&#xA;case $? in&#xA;    0)pcmanfm &amp;quot;$1&amp;quot;&#xA;    ;;&#xA;    1)gedit $1&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Make that script executable.&lt;/p&gt;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/run-or-edit.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Run or edit&#xA;Icon=gedit&#xA;Categories=Utility;TextEditor;&#xA;MimeType=application/x-desktop;&#xA;Exec=bash -c '/path/to/your/scripts/location/run_or_edit_.sh %f' &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Make that executable, then selecting any &lt;code&gt;.desktop&lt;/code&gt; file, right-click, 'Properties', and under 'Open with' select that new &amp;quot;application&amp;quot; called 'Run or edit'.&lt;/p&gt;&#xA;&lt;p&gt;Now when you click a &lt;code&gt;.desktop&lt;/code&gt; file you will get this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ObUhy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ObUhy.png&quot; alt=&quot;run or edit pop-up&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Thunar can be used in the same way as PCManFM.&lt;/p&gt;&#xA;&lt;p&gt;I find these file managers useful on the system for other purposes too, like for instance to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10962/170&quot;&gt;add Thunar's bulk-renaming tool in Pantheon Files&lt;/a&gt; and to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9488/170&quot;&gt;get pop-up options upon insertion of removable media with PCManFM daemon&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-02T14:21:00.580" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="10956" PostTypeId="1" AcceptedAnswerId="10968" CreationDate="2017-03-02T00:22:51.633" Score="0" ViewCount="352" Body="&lt;p&gt;I have a Portuguese (pt-br) keyboard on my thinkpad and it have by default a special key that its not on standard place. They key is the &quot;Question Mark + Slash&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make it work I always use the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo setxkbmap -model thinkpad60 -layout br&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But since my last update of elementary (01.March.2017) this command does not work anymore, so now the key is dead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a way to enable it temporarily, but it only works for the active session. After restarting, I need to do the process again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure keyboard-configuratio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, is there a way to setup it correctly? Without losing the settings after restart?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HfCoG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HfCoG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2018-02-18T14:26:36.003" Title="thinkpad keyboard layout not working" Tags="|keyboard|keyboard-layout|thinkpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10957" PostTypeId="2" ParentId="10742" CreationDate="2017-03-02T02:39:48.543" Score="0" Body="&lt;p&gt;elementary tweaks can be used to change the color and transparency of the terminal along with gsettings reset org.pantheon.terminal.settings palette as mentioned above by lemonslice to get the colors back to default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cRPPn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cRPPn.png&quot; alt=&quot;elementary tweaks&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-02T02:39:48.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10958" PostTypeId="1" AcceptedAnswerId="10959" CreationDate="2017-03-02T03:07:05.593" Score="0" ViewCount="125" Body="&lt;p&gt;Just got a fresh copy of elementary after I messed it up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then again, I just installed zsh and I was configuring it, messed up the configuration. After that Oh well, lets remove and reinstall it. As I removed I realised that now I do not have a working terminal!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;I tried the following&lt;/em&gt;&lt;/strong&gt;&lt;br&gt;&#xA; * When I do &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;Fn&lt;/kbd&gt;+&lt;kbd&gt;F6&lt;/kbd&gt;, I'm directed to the original terminal but it asks for a login and when I do that it just redirects me to the same login command again.&lt;br&gt;&#xA; * Tried Starting My Terminal. It is simply blinking.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tCZHH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tCZHH.png&quot; alt=&quot;Nothing Happens in the terminal&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me fix my terminal again.&lt;/p&gt;&#xA;" OwnerUserId="7426" LastActivityDate="2017-03-03T16:34:35.557" Title="Pantheon Terminal Will not work after uninstalling zsh" Tags="|pantheon-terminal|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10959" PostTypeId="2" ParentId="10958" CreationDate="2017-03-02T05:25:26.357" Score="0" Body="&lt;p&gt;Luckily I had sublime text installed. Just traverse to &lt;code&gt;\etc\&lt;/code&gt; and then edit file named &lt;code&gt;passwd&lt;/code&gt;.&lt;br&gt;&#xA;It would require you to have admin access, but if you have replace all &lt;code&gt;zsh&lt;/code&gt; references with &lt;code&gt;bash&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to change only one line &lt;code&gt;uname:x:1000:1000:user,,,:/home/uname:/bin/zsh&lt;/code&gt; to &lt;code&gt;uname:x:1000:1000:user,,,:/home/uname:/bin/bash&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="7426" LastActivityDate="2017-03-02T05:25:26.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10961" PostTypeId="2" ParentId="10953" CreationDate="2017-03-02T07:02:25.117" Score="3" Body="&lt;p&gt;You can remove them by using:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove nvidia*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will remove everything related to nvidia, so make sure to double check before continuing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*&#xA;sudo apt-get autoremove &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if removing nvidia drivers will stop your nvidia GPU. It will probably still work and use Nouveau drivers, but I'm not sure. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried &lt;code&gt;sudo prime-select intel&lt;/code&gt; with your nvidia drivers installed? &lt;/p&gt;&#xA;" OwnerUserId="8799" LastEditorUserId="8799" LastEditDate="2017-03-02T07:08:53.657" LastActivityDate="2017-03-02T07:08:53.657" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="10962" PostTypeId="2" ParentId="6657" CreationDate="2017-03-02T10:16:13.463" Score="2" Body="&lt;p&gt;You could do that by integrating into Pantheon Files' context menu an option to use the bulk-rename tool of Thunar file manager, which has many other options than by just one rename-pattern.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install thunar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, using &lt;code&gt;gedit&lt;/code&gt; as text editor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/contractor/rename-bulk.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Rename file(s) in Thunar&#xA;Icon=thunar&#xA;MimeType=application/octet-stream&#xA;Exec=thunar -B %U&#xA;Gettext-Domain=pantheon-files &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lm6oM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lm6oM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-03-04T22:15:45.673" LastActivityDate="2017-03-04T22:15:45.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10963" PostTypeId="2" ParentId="10947" CreationDate="2017-03-02T12:17:23.503" Score="3" Body="&lt;p&gt;The minimum window size  (910 x 640 in pixels) is now hard coded into Files as the result of a recent merge, so cannot be changed (except with a bug request, possibly).  It was thought to be a reasonable minimum usable size and on my computer occupies less than one quarter of the screen (on Loki with elementary theme). If the window is appearing bigger with a different theme then something else is stopping it shrinking e.g. widgets taking more room - so reducing the absolute minimum, or making it a setting may not help. &lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-03-02T12:17:23.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10965" PostTypeId="1" CreationDate="2017-03-02T13:07:20.690" Score="1" ViewCount="159" Body="&lt;p&gt;eOS by default do not allow shortcuts or files to be added on desktop. That's nice. I know there is a workaround to fix this. And I did and ended up with an ugly desktop.&lt;/p&gt;&#xA;&lt;p&gt;Now, I have a better idea that I will like to try to implement myself. What if the application menu (aka slingshot) rearrange itself in most/last used app first, so I don't have to scroll via categories or alphabetically.&lt;/p&gt;&#xA;&lt;p&gt;OR, populate plank automatically with last or most used apps, along with the icons forced to stay on the dock.&lt;/p&gt;&#xA;&lt;p&gt;Edit: I am trying to hack the panel myself, GUIDE ME where to look at! -&lt;/p&gt;&#xA;&lt;h3&gt;Therefore I am not trying to post a feature request or a bug report, but I just want to ask &lt;em&gt;if and how&lt;/em&gt; these changes are possible .&lt;/h3&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="572" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-05-31T12:29:18.590" Title="How do I dynamically populate slingshot/plank" Tags="|wingpanel|plank|slingshot|navigation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10966" PostTypeId="1" CreationDate="2017-03-02T14:29:29.333" Score="1" ViewCount="103" Body="&lt;p&gt;The executable scripts are always executed if clicked in Pantheon Files, even if the default application to be used is changed for them to a text editor under &lt;em&gt;Properties-Open with&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have noticed this behavior only for executable scripts (while &lt;a href=&quot;https://elementaryos.stackexchange.com/q/10952/170&quot;&gt;the opposite happens for desktop files&lt;/a&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(This is also the cause why the system will not &lt;a href=&quot;https://elementaryos.stackexchange.com/q/4256/170&quot;&gt;Ask before running script from Pantheon Files&lt;/a&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can that me changed?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h3&gt;Edit after posting this as a bug: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1669996&quot; rel=&quot;nofollow noreferrer&quot;&gt;Automatic execution of scripts on click or double click cannot be changed &lt;/a&gt; - voted to close.&lt;/h3&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-06T08:58:38.257" Title="Why doesn't Pantheon Files remember default application for scripts?" Tags="|release-loki|pantheon-files|applications|script|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10967" PostTypeId="1" CreationDate="2017-03-02T16:51:39.367" Score="5" ViewCount="1453" Body="&lt;p&gt;having a lot of trouble mounting and reading an SD card in Elementary. I'm running the latest Elementary, all up to date, on a Lenovo Thinkpad T450s.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got a new SD card and plugged it in. Couldn't read because it was exFAT; no problem, I used the Disks app to reformat it to NTFS. Now it mounted, but when I tried to move some of my music over, it worked fine for about 1 gig and then slowed to 80 kilbytes per second. I did this whole thing over again and the same thing happened again. My next attempt to reformat failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point I thought I had bought a bad card, but I rebooted into Windows 10, reformatted NTFS, and transferred a full 100 gigs of music over, no problem. I checked a few songs at random, everything was fine. Booted back into Elementary, and the SD card would show up in the file manager but wouldn't be able to mount. It showed up in the Disks app as &quot;Partition Type: unknown&quot;. Not able to &lt;em&gt;mount&lt;/em&gt; or &lt;em&gt;mount.cifs&lt;/em&gt; in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I've rebooted again and it doesn't show up at all. Still shows up in Disks as  &quot;Partition Type: unknown&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the dmesg tail immediately after I insert the card:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[   66.089049] mmc0: new ultra high speed SDR104 SDXC card at address 0007&#xA;[   66.093405] mmcblk0: mmc0:0007 5&amp;amp;DRP 119 GiB &#xA;[   66.094242]  mmcblk0: p1&#xA;[   66.136799] mmcblk0: unknown error -22 sending read/write command, card status 0x900&#xA;[   66.304671] mmc0: tried to reset card&#xA;[   66.304687] blk_update_request: I/O error, dev mmcblk0, sector 2048&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've seen scattered threads throughout Reddit and Stack Exchange but people seem to have had limited success. Any help would be appreciated, thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT] I've seen some suggestions that the SDXC card only officially supports the exFAT filesystem. So I reformatted the card with the official SD Association's utility, and on the Elementary side I installed exfat-fuse and exfat-utils. The card now reads but very unreliably -- just opening a folder will frequently cause my file manager to lock up.&lt;/p&gt;&#xA;" OwnerUserId="8807" LastEditorUserId="8807" LastEditDate="2017-03-10T16:13:48.710" LastActivityDate="2018-12-21T19:02:00.387" Title="Unable to mount or read SD card" Tags="|mount|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="10968" PostTypeId="2" ParentId="10956" CreationDate="2017-03-02T17:14:26.513" Score="1" Body="&lt;p&gt;After many researches I found what was happening. The settings (from thinkpad + br) was being interfered by an additional options added by another model (korean).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How I solved:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, checking the layout info with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# setxkbmap -query&#xA;rules:      evdev&#xA;model:      thinkpad60&#xA;layout:     br&#xA;options:    korean:ralt_rctrl,grp:shifts_toggle&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Second, setting options to &lt;em&gt;none&lt;/em&gt; with empty quotes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# setxkbmap -model thinkpad60 -layout br -option ''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now all the keyboard is working fine, AltGr, question mark + slash, characters used with AltGr.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;In addiction, add the same command line in the .bashrc file (on your home folder) on the last line file. It will run the script everytime you resume  from sleep mode.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="6806" LastEditorUserId="6806" LastEditDate="2018-02-18T14:26:36.003" LastActivityDate="2018-02-18T14:26:36.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10969" PostTypeId="2" ParentId="10949" CreationDate="2017-03-02T17:30:19.330" Score="5" Body="&lt;p&gt;Got it working by copying the relevant &lt;code&gt;.desktop&lt;/code&gt; file from &lt;code&gt;~/.local/share/applications/&lt;/code&gt; to &lt;code&gt;~/.config/autostart&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The AppImage I downloaded, when run the first time, gave an option to add shortcut file, which is how the &lt;code&gt;.desktop&lt;/code&gt; file got in the local folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10932/8796&quot;&gt;this answer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8796" LastActivityDate="2017-03-02T17:30:19.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10970" PostTypeId="1" AcceptedAnswerId="11347" CreationDate="2017-03-02T18:04:25.180" Score="0" ViewCount="659" Body="&lt;p&gt;I'm using Elementary OS 0.4 Loki. I updated my packages a few days ago and since then whenever I use &quot;Files&quot; to open a file I get an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Failed to open files&lt;/strong&gt; Failed to execute child process &quot;xterm&quot; (No such file or directory)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I fix this error?&lt;/p&gt;&#xA;" OwnerUserId="8808" LastActivityDate="2017-05-01T07:54:49.150" Title="XTerm Crash - Unable to open files" Tags="|updates|files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10975" PostTypeId="1" CreationDate="2017-03-03T00:30:28.990" Score="1" ViewCount="62" Body="&lt;p&gt;So I recently purchase my Logitech k750 and I see that now when I boot into the latest Loki version, it doesn't boot into the os and when I decide to hook the keyboard bac after signing in, it makes Wing panel unusable and crashes Wing panel only. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The default drivers weren't working and I installed the Solaar drivers manager and that didn't working either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have a MX Master mouse, if that matters. I was using separate adapters but I unified both devices to use one and its still the same issue.&lt;/p&gt;&#xA;" OwnerUserId="8812" LastActivityDate="2017-03-03T00:30:28.990" Title="Logitech k750 Keyboard crashes Wing panel" Tags="|wingpanel|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10977" PostTypeId="2" ParentId="10918" CreationDate="2017-03-03T05:06:05.183" Score="1" Body="&lt;p&gt;Upgrading the kernel works for me. I guess it works if having newer cpu is your problem.&lt;/p&gt;&#xA;" OwnerUserId="8815" LastActivityDate="2017-03-03T05:06:05.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10978" PostTypeId="1" CreationDate="2017-03-03T12:57:46.717" Score="1" ViewCount="242" Body="&lt;p&gt;Steps:&lt;br&gt;&#xA;1 - Plug an external monitor in HDMI output;&lt;br&gt;&#xA;2 - Set the external monitor as the primary display;&#xA;2 - Unplug the HDMI cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Result:&lt;br&gt;&#xA;elementary OS keeps recognizing two monitors and the windows opened in second monitor are lost now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a simple fix to it?&lt;/p&gt;&#xA;" OwnerUserId="8821" LastEditorUserId="308" LastEditDate="2018-08-07T17:05:53.307" LastActivityDate="2018-08-07T17:05:53.307" Title="How to make elementary OS detect only one display when HDMI is plugged out?" Tags="|display|hdmi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="10979" PostTypeId="2" ParentId="7490" CreationDate="2017-03-03T14:11:44.147" Score="2" Body="&lt;p&gt;As a complement to the main answer - to do it from Slingshot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;scratch-text-editor ~/.local/share/applications/apt-update.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;paste this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=update&#xA;Icon=system-software-install&#xA;Categories=Utility;&#xA;Exec=pantheon-terminal -e 'sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9q74O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9q74O.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-03-03T14:11:44.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10980" PostTypeId="2" ParentId="4125" CreationDate="2017-03-03T14:51:39.567" Score="0" Body="&lt;p&gt;This site has instruction on removing EFI from linux instal ISOs and some sample ISO's.&#xA;&lt;a href=&quot;https://mattgadient.com/2016/07/11/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mattgadient.com/2016/07/11/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to install Mint with no issue. I want to try elementary soon.&lt;/p&gt;&#xA;" OwnerUserId="8824" LastActivityDate="2017-03-03T14:51:39.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10981" PostTypeId="1" CreationDate="2017-03-03T15:02:22.030" Score="3" ViewCount="2488" Body="&lt;p&gt;I have installed libreoffice as a snap. In Ubuntu it uses th default gtk theme but in Elementary OS it doesn't. Is it possible to enable this or do i need to wait for the Elementary team to implement it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how it looks right now: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JxUx6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JxUx6.png&quot; alt=&quot;Screnshot Libreoffice&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8825" LastEditorUserId="8825" LastEditDate="2017-03-03T15:50:12.113" LastActivityDate="2019-12-19T20:14:34.460" Title="GTK theming in snap apps" Tags="|themes|gtk|camera|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="10982" PostTypeId="2" ParentId="10958" CreationDate="2017-03-03T16:34:35.557" Score="0" Body="&lt;p&gt;You can use the &lt;code&gt;chsh&lt;/code&gt; utility change the login shell of a user in a terminal window.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chsh -s /bin/bash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-03T16:34:35.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10983" PostTypeId="1" AcceptedAnswerId="10987" CreationDate="2017-03-03T17:46:38.630" Score="3" ViewCount="1163" Body="&lt;p&gt;Elementary didn't come with a ~/.profile or ~/.bash_profile. I created the latter. I can manually enter &lt;code&gt;source ~/.bash_profile&lt;/code&gt;, and it works. But when I start terminal cleanly, it doesn't automatically source this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm going to go ahead and work around this by just modifying my ~/.bashrc, but that seems like a hack.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thoughts on how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="8827" LastActivityDate="2017-03-04T01:53:15.583" Title="No bash_profile and when I define it, it doesn't load" Tags="|bash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10984" PostTypeId="1" AcceptedAnswerId="10990" CreationDate="2017-03-03T21:47:44.053" Score="1" ViewCount="829" Body="&lt;p&gt;The screen magnifier has been turned on.  The mouse moves the view around the desktop.  It can't get into applications because mouse-over moves the menu out of the way and closes the applications window.  I have looked into Universal Access but there isn't a magnifier or a choice for turning the magnifier off.  I have 0.4 Loki and it got updates today.&lt;/p&gt;&#xA;" OwnerUserId="8830" LastEditorUserId="578" LastEditDate="2017-03-04T06:16:38.210" LastActivityDate="2017-03-04T11:35:25.403" Title="How to turn off screen magnifier?" Tags="|display|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10985" PostTypeId="1" CreationDate="2017-03-03T21:56:43.003" Score="1" ViewCount="124" Body="&lt;p&gt;all. I'd like to know why I can't pay for elementary with Paypal. Also, if I enter $0, can I just download the image file?&lt;/p&gt;&#xA;" OwnerUserId="8829" LastActivityDate="2017-03-05T07:21:45.833" Title="Why is there no option to use Paypal?" Tags="|elementary-website|" AnswerCount="2" CommentCount="5" ClosedDate="2017-04-07T13:23:16.780" ContentLicense="CC BY-SA 3.0" />
  <row Id="10986" PostTypeId="2" ParentId="10985" CreationDate="2017-03-03T23:09:07.597" Score="2" Body="&lt;p&gt;you can enter $0 and download elementary.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-03T23:09:07.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10987" PostTypeId="2" ParentId="10983" CreationDate="2017-03-04T01:53:15.583" Score="4" Body="&lt;p&gt;&lt;code&gt;.bash_profile&lt;/code&gt; and &lt;code&gt;.profile&lt;/code&gt; are only executed by login shells and text consoles. Terminal apps on GNU/Linux are neither so they use &lt;code&gt;.bashrc&lt;/code&gt; instead.  AFAIK only macOS uses a login shell on its Terminal app, hence its use of &lt;code&gt;.bash_profile&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sourcing &lt;code&gt;.bashrc&lt;/code&gt; from &lt;code&gt;.bash_profile&lt;/code&gt; to avoid maintenance of two separate files is pretty common so you don't need to worry about it being hack-ish.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-03-04T01:53:15.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10988" PostTypeId="2" ParentId="10924" CreationDate="2017-03-04T05:30:40.867" Score="2" Body="&lt;p&gt;I have finally found an answer, thanks to the suggestion of &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3911/jeremy-wootten&quot;&gt;Jeremy Wooten&lt;/a&gt; and some official &lt;a href=&quot;http://docs.oracle.com/cd/E19253-01/819-5461/gbaln/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;ZFS documentation&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a lot of trials and errors, here are the steps to undertake.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the ZFS filesystem's mountpoint to &lt;strong&gt;legacy&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ zfs set mountpoint=legacy {poolname}&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the following line to &lt;code&gt;/etc/fstab&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;{poolname}  /media/{username}/Data  zfs defaults,nofail 0   2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What this does is mount &lt;code&gt;{poolname}&lt;/code&gt; to &lt;code&gt;/media/{username}/Data&lt;/code&gt; with the &lt;code&gt;defaults&lt;/code&gt; mount options, and &lt;code&gt;nofail&lt;/code&gt; to skip any failure messages that would block the boot process. In my case, because ZFS is not loaded at that point.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Since the mount fails at boot time, the drive was not automatically mounted. To fix this, we need to call &lt;code&gt;mount&lt;/code&gt; again after boot is completed. Since it needed to be mounted by &lt;code&gt;root&lt;/code&gt;, which can be run automatically after boot inside &lt;code&gt;/etc/rc.local&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Mount all drives after boot&#xA;mount -a&#xA;&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;That's it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have &lt;code&gt;Data&lt;/code&gt; visible right under my &lt;code&gt;File System&lt;/code&gt; in &lt;code&gt;Devices&lt;/code&gt;, and I can see the space usage at a glance, and it &lt;em&gt;just feels right&lt;/em&gt;!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Picture or it didn't happen:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/DhxCI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DhxCI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8726" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-04T05:30:40.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10989" PostTypeId="1" CreationDate="2017-03-04T10:16:50.910" Score="1" ViewCount="361" Body="&lt;p&gt;I'm trying to connect to a pptp vpn. but I keep getting the error &quot;vpn  service stopped&quot; It used to work at beginning but then stopped working, and I don't know what exactly caused it to fail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried playing with the all the configuration options but none of them made it work. I also tried making a manual connection through terminal using the guides which are avaialbe on internet but those didn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can connect to my vpn via my android phone and windows laptop with no problem.&lt;/p&gt;&#xA;" OwnerUserId="8832" LastActivityDate="2018-06-16T19:22:56.397" Title="Cannot connect pptp vpn: Vpn service stopped" Tags="|networking|vpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10990" PostTypeId="2" ParentId="10984" CreationDate="2017-03-04T11:35:25.403" Score="0" Body="&lt;p&gt;The only magnifier present on the system seems to be the zoom triggered by Super+ and Super- (plus and minus)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-03-04T11:35:25.403" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10991" PostTypeId="2" ParentId="8244" CreationDate="2017-03-04T12:51:32.737" Score="0" Body="&lt;p&gt;This was a &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1644854&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug in Pantheon files&lt;/a&gt; and was fixed.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-03-04T12:51:32.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10992" PostTypeId="1" AcceptedAnswerId="11108" CreationDate="2017-03-04T16:15:44.790" Score="0" ViewCount="2093" Body="&lt;p&gt;Tried to add to the question below, but I don't have the rep yet, so new question&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10972/no-internet-connection-after-an-updte-os-loki&quot;&gt;No Internet connection after an updte OS Loki&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Short version: triple boot Win XP, Xubuntu, elementary. Network won't connect after OS update, ethernet only, no wifi on this machine. Similar happened in Zorin. Xubuntu working. Win XP working.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Three key points:&lt;br&gt;&#xA;- I looked at the versions of libnl-3-200, libnl-genl-3-200 and libnl-route-3-200 (in case a downgrade might help) on Xubuntu, elementary installation and elementary live CD. They're all the same version, so I'm guessing the problem isn't here.&lt;br&gt;&#xA;- In Xubuntu, ethernet visible and connected, sudo ifconfig -a shows outputs for eth0 and lo. elementary show lo but no eth0&lt;br&gt;&#xA;- Network manager is missing the Network icon. Description in 2nd comment.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Longer version:&lt;br&gt;&#xA;Linux noob - patience please!&lt;br&gt;&#xA;Start with Win XP&lt;br&gt;&#xA;10-yr-old old desktop, ethernet only, no wifi&lt;br&gt;&#xA;Try live CD elementary Loki. Impressed with elementary's approach - curated=uncluttered, easy to use, easy to find and launch applications, while still having the power and control of commands via terminal, with a very good looking interface&lt;br&gt;&#xA;Install elementary Loki as dual boot&lt;br&gt;&#xA;After a recent update January 2017, network connection stops working&lt;br&gt;&#xA;Try to find causes and solutions at this forum (keywords ethernet, lan, connection, internet, eth0, and prob others) and around the internet. Find no fix&lt;br&gt;&#xA;No network problems in either WinXP or elementary live CD&#xA;Wipe and reinstall elementary Loki, network working. Install all updates and upgrades, network does not work&lt;br&gt;&#xA;Install Lubuntu (as of Ubuntu 16.04.1) as triple boot&lt;br&gt;&#xA;Try other Linuxes (have tried several Linux live CDs, and for a bit of fun, Haiku and GhostBSD live)&lt;br&gt;&#xA;Wipe Lubuntu and install Ubuntu. A little slow on my system (still faster than XP which has never been wiped and reinstalled.) Install Metacity with Ubuntu, fast enough, but keep exploring&lt;br&gt;&#xA;Wipe Ubuntu and install Xubuntu. Fast enough, and will probably stick with this as main Linux OS and probably eventually dump Windows on this machine&#xA;Try to find elementaryOS &quot;no network&quot; causes and solutions at this forum and around the internet. Find no fix&lt;br&gt;&#xA;Wanted to try Zorin at some point anyway, wipe elementary and install Zorin. Network connection works. A bit slow on my system&lt;br&gt;&#xA;Install all updates and upgrades, network connection stops working&#xA;Wipe Zorin, reinstall elementary&lt;br&gt;&#xA;Install elementary updates individually, except OS update&lt;br&gt;&#xA;Network connection still operating, even with Network Manager update&lt;br&gt;&#xA;Install OS update, network connection stops working  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can reconstruct at least some of the specific steps I took if it would help (but not all steps, since I foolishly didn't keep step-by-step notes.)&lt;/p&gt;&#xA;" OwnerUserId="8747" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-14T03:04:59.180" Title="No ethernet/internet" Tags="|networking|internet|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="10993" PostTypeId="1" CreationDate="2017-03-04T18:10:19.340" Score="1" ViewCount="128" Body="&lt;p&gt;i'm trying to use LMMS and i receive this mesage in the terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ lmms&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Notice: could not set realtime priority.&#xA;Couldn't create MIDI-client, neither with ALSA nor with OSS. Will use dummy-MIDI-client.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;there were more errors that i've fixed but i cant solve those can anybody help me&#xA;the program runs but i cant use MIDI&lt;/p&gt;&#xA;" OwnerUserId="8834" LastEditorUserId="578" LastEditDate="2017-03-04T21:32:36.600" LastActivityDate="2017-03-04T21:32:36.600" Title="MIDI doesn't work" Tags="|sound|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10994" PostTypeId="1" CreationDate="2017-03-04T19:31:23.733" Score="3" ViewCount="367" Body="&lt;p&gt;I want to modify the brackets completion plugin but I can't find a way, is even possible to do so? or I have to write a new plugin?&lt;/p&gt;&#xA;" OwnerUserId="8836" LastEditorUserId="578" LastEditDate="2017-03-04T21:34:55.587" LastActivityDate="2018-12-27T10:02:05.450" Title="How to modify scratch text editor bracket completion plugin?" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10995" PostTypeId="1" CreationDate="2017-03-05T06:40:22.443" Score="1" ViewCount="149" Body="&lt;p&gt;I updated my OS last March 4, 2017. After the update, I have the following display issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Laptop display is shown as Unknown Display&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Laptop display brightness cannot be adjusted&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) External monitor cannot be connected. It can be connected before bootup, but the GUI won't allow me to extend displays. Both displays (external and built-in) are shown as Unknown Display &lt;/p&gt;&#xA;" OwnerUserId="8564" LastActivityDate="2023-12-25T20:08:41.020" Title="Display Issues after update" Tags="|display|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10996" PostTypeId="2" ParentId="10985" CreationDate="2017-03-05T07:21:45.833" Score="0" Body="&lt;p&gt;I am sure that PayPal would raise more money as it is a more common method of payment that many have when, for instance. acting on eBay. If Elementary team offered payment by PayPal also I am sure that they could obtain more payments immediately .. However, it is their own geeky choice&lt;/p&gt;&#xA;" OwnerUserId="8046" LastActivityDate="2017-03-05T07:21:45.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10997" PostTypeId="1" CreationDate="2017-03-05T18:24:18.257" Score="1" ViewCount="2023" Body="&lt;p&gt;When I start my PC, the elementary login screen shows up on my secondary monitor, but when I sign in and get to the desktop, everything display-wise is correctly set up (dock and menu bar on primary monitor). How do I fix this?&lt;/p&gt;&#xA;" OwnerUserId="5967" LastActivityDate="2018-04-16T16:53:12.830" Title="Log-in screen shows up on secondary monitor" Tags="|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="10998" PostTypeId="1" CreationDate="2017-03-05T19:44:48.330" Score="1" ViewCount="1212" Body="&lt;p&gt;I have installed the Flatabulous theme and the Paper icons on my OS but unfortunately the background color of the notifications popup is transparent, which is pretty hard to read it sometimes.&#xA;How can I change the color of the popup and turn it into black or something different?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance for the answers!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: I have already read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1263/how-can-i-change-the-notification-font-color-and-or-background-color&quot;&gt;this&lt;/a&gt; but it was not useful because I don't know where is located the file that they mention in the post.&#xA;Anyways, here is an example of my notifications popup: as you can see it's hard to see, almost impossible...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SgVo3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SgVo3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8290" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-10-07T01:06:12.867" Title="How to change the background color of the notifications popup?" Tags="|notifications|color|" AnswerCount="1" CommentCount="2" ClosedDate="2017-10-08T17:19:02.407" ContentLicense="CC BY-SA 3.0" />
  <row Id="10999" PostTypeId="2" ParentId="10994" CreationDate="2017-03-05T21:35:33.833" Score="1" Body="&lt;p&gt;You have two ways to get a new brackets completion plugin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first one is to propose to developers a modified version in order they accept it and add it to the next update. You can do that by opening a &lt;em&gt;blueprint&lt;/em&gt; in the Scratch website at &lt;em&gt;launchpad.net&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To open a new blueprint, visit &lt;a href=&quot;https://blueprints.launchpad.net/scratch&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blueprints.launchpad.net/scratch&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other way, if you know Vala, is to copy the plugin code from &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/scratch/scratch/files/head:/plugins/brackets-completion/&quot; rel=&quot;nofollow noreferrer&quot;&gt;launchpad.com&lt;/a&gt; and make your changes, debug and test your plugin. Once it's ready, you can upload to your Launchpad or Github account and import it to a new branch of Scratch at &lt;a href=&quot;https://code.launchpad.net/scratch/+new-import&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad&lt;/a&gt; and propose it to merge. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Meanwhile developers decide, you can build it in your system to use it.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="686" LastEditDate="2017-04-05T10:36:14.693" LastActivityDate="2017-04-05T10:36:14.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11000" PostTypeId="1" CreationDate="2017-03-06T01:54:43.590" Score="1" ViewCount="571" Body="&lt;p&gt;Hello this is a brand new laptop:&#xA;   HP Envy x360 m6-ar004dx convertible.AMD FX-9800p APU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound works fine with the internal speakers and headphone jack,&#xA;but will not work over HDMI.&#xA;Sound settings shows HDMI and so does Pavucontrol, along with 3 profiles:&#xA;     Digital Stereo (HDMI) Output&#xA;     Digital Surround 7.1 (HDMI) Output&#xA;     Digital Surround 5.1 (HDMI) Output with unplugged or plugged in appended &#xA;depending on whether or not it's plugged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsamixer shows HDA ATI HDMI with a single S/PDIF 00.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My older laptop also shows this, but everything works as expected, the older laptop is also a AMD APU system.&#xA;I do not use proprietary drivers, and I don't even know if they're available for Loki/Ubuntu 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PLEASE HELP ME! I spend alot of time hooked up to a tv using the sound through it.&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2017-07-17T07:47:52.753" Title="Loki Laptop, no sound through Radeon HDMI" Tags="|sound|audio|hdmi|radeon|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11002" PostTypeId="1" AcceptedAnswerId="11011" CreationDate="2017-03-06T11:33:22.603" Score="1" ViewCount="371" Body="&lt;p&gt;So i tried installing DiscordApp and it tells me i got broken dependencies and that i need to run &quot;&lt;strong&gt;Sudo apt-get install -f&lt;/strong&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However doing that yields this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Errors were encountered while processing:&#xA;  /var/cache/apt/archives/linux-image-4.4.0-64-generic_4.4.0-64.85_amd64.deb&#xA;  /var/cache/apt/archives/linux-image-4.4.0-62-generic_4.4.0-62.83_amd64.deb&#xA; E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Full log for install -f&lt;/strong&gt;: &lt;a href=&quot;http://pastebin.com/yy27igpT&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pastebin.com/yy27igpT&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried running &lt;strong&gt;sudo apt autoremove&lt;/strong&gt; which also yields a similar problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(log for &lt;strong&gt;autoremove&lt;/strong&gt;: &lt;a href=&quot;http://pastebin.com/PXf7H9pT&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pastebin.com/PXf7H9pT&lt;/a&gt;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary Os is my first linux distro, i'm really liking it so far but since this error occured i have been unable to install programs, updating and similar so it's really blocking me :( &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone out there knows how to fix this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution:&lt;/strong&gt; Follow the solution steps on &lt;a href=&quot;https://askubuntu.com/questions/345588/what-is-the-safest-way-to-clean-up-boot-partition#345611&quot;&gt;https://askubuntu.com/questions/345588/what-is-the-safest-way-to-clean-up-boot-partition#345611&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8822" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-03-07T14:40:04.640" Title="Loki Broken dependencies. Not sure how to fix (Sudo apt-get install -f won't help)" Tags="|release-loki|dependencies|software-sources|sources|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11003" PostTypeId="1" CreationDate="2017-03-06T12:22:46.273" Score="1" ViewCount="138" Body="&lt;p&gt;Has elementary OS team considered creating elementary OS to be a rolling Distribution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just a thought as I think it's better than reinstalling elementary OS when Loki is updated to a new version. &lt;/p&gt;&#xA;" OwnerUserId="8714" LastEditorUserId="16827" LastEditDate="2019-04-13T13:21:54.033" LastActivityDate="2019-04-13T13:21:54.033" Title="Has elementary OS team considered creating elementary OS to be a rolling Distribution?" Tags="|system-installation|updates|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11004" PostTypeId="1" AcceptedAnswerId="11006" CreationDate="2017-03-06T12:25:21.617" Score="0" ViewCount="517" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vOX4d.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vOX4d.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some applications installed in playonlinux show no icon in Slingshot, although in playonlinux and as desktop files in &lt;code&gt;~/.local/share/applications&lt;/code&gt;  (as seen in the file manager) they have proper icons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aOUGk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aOUGk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2017-03-06T12:46:31.760" Title="Slingshot: see proper icon of Playonlinux applications" Tags="|icons|slingshot|app-shortcuts|playonlinux|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11005" PostTypeId="2" ParentId="10936" CreationDate="2017-03-06T12:36:43.340" Score="0" Body="&lt;p&gt;I'm having the same problem too but was able to turn it on and open the settings from the wingpanel menu. Then the bluetooth settings showed up in switchboard.&#xA;Anyone know where the configs are stored?&lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2017-03-06T12:36:43.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11006" PostTypeId="2" ParentId="11004" CreationDate="2017-03-06T12:41:03.873" Score="0" Body="&lt;p&gt;Looking in the desktop files (as text), the &lt;code&gt;Icon&lt;/code&gt; line directs to image files in &lt;code&gt;~/.PlayOnLinux/icones/full_size&lt;/code&gt;. These image files are created there by Playonlinux when a desktop-file/shortcut is created: selecting &lt;em&gt;Configure&lt;/em&gt;, selecting the virtual drive, then selecting to create a new shortcut for that. (To access the shortcuts in Slingshot the desktop files have to be copied from &lt;code&gt;$HOME&lt;/code&gt; to &lt;code&gt;~/.local/share/applications&lt;/code&gt;, as mentioned in the question.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;copy the image files to &lt;code&gt;~/.local/share/icons/&lt;/code&gt; &lt;/li&gt;&#xA;&lt;li&gt;rename them to include the &lt;code&gt;.png&lt;/code&gt; extension (e.g. from &lt;code&gt;name&lt;/code&gt; to &lt;code&gt;name.png&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;edit the &lt;code&gt;.desktop&lt;/code&gt; file to have the line &lt;code&gt;Icon=name&lt;/code&gt; - replacing &lt;code&gt;name&lt;/code&gt; accordingly.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-03-06T12:46:31.760" LastActivityDate="2017-03-06T12:46:31.760" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11007" PostTypeId="1" CreationDate="2017-03-06T12:48:53.660" Score="2" ViewCount="173" Body="&lt;p&gt;Unread number doesn't update, even after restarting the email client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h90bf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h90bf.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to force update this or trigger this automatically?&lt;/p&gt;&#xA;" OwnerUserId="8790" LastActivityDate="2024-01-02T04:02:45.313" Title="Unread number i pantheon email doesn't update" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11008" PostTypeId="1" CreationDate="2017-03-06T12:55:13.560" Score="1" ViewCount="146" Body="&lt;p&gt;Using the system settings app to set a custom wallpaper (from my own images, not the ones that are pre-installed with elementary) makes the active wallpaper black instead of changing to the requested image.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using a file browser, right clicking an image and hitting &quot;Set as Desktop Background&quot; works just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is this, and how do I fix it?&lt;/p&gt;&#xA;" OwnerUserId="5967" LastEditorUserId="5967" LastEditDate="2017-03-06T16:22:11.123" LastActivityDate="2017-03-11T18:07:27.930" Title="Custom wallpaper set up through system settings shows up as black" Tags="|desktop|wallpaper|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11009" PostTypeId="1" CreationDate="2017-03-06T13:10:33.440" Score="1" ViewCount="76" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GdGVx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GdGVx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not a big linux wizzard. To me it looks like the installation script wants me to perform the command by hand because it cannot find the canonmg2500.ppd file. Which makes total sense as it is not within the driver files that are downloaded. So entering the command by hand will have the same result. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do i get this printer to work ? It is not automatically detected, even if the drivers are installed. (common and printer specific .deb files are installed via package manager.           &lt;/p&gt;&#xA;" OwnerUserId="8365" LastActivityDate="2017-03-06T13:10:33.440" Title="Installing Canon MG2555 this happend:" Tags="|drivers|printer|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11010" PostTypeId="1" AcceptedAnswerId="11013" CreationDate="2017-03-06T13:17:32.587" Score="0" ViewCount="575" Body="&lt;p&gt;As stated in the question: is it possible to enable back-cycling through open applications when using alt-tab? Eg., pressing alt-tab goes one app forward, and pressing alt-shift-tab goes one app backward? &lt;/p&gt;&#xA;" OwnerUserId="7752" LastActivityDate="2021-08-11T14:52:47.480" Title="Enabling back-cycling when using alt-tab?" Tags="|release-loki|gala|user-interface|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11011" PostTypeId="2" ParentId="11002" CreationDate="2017-03-06T13:32:06.447" Score="1" Body="&lt;p&gt;The error message says there is no more space on the disk. Try to  remove some packages or delete other files before running &lt;code&gt;apt-get autoremove&lt;/code&gt; or install.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-06T13:32:06.447" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11013" PostTypeId="2" ParentId="11010" CreationDate="2017-03-06T15:53:54.260" Score="3" Body="&lt;p&gt;Switch windows: &lt;kbd&gt;Shift&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Switch windows backward: &lt;kbd&gt;Shift&lt;/kbd&gt;-&lt;kbd&gt;Alt&lt;/kbd&gt;-&lt;kbd&gt;Tab&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Zr4Kp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zr4Kp.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can changed that if you want.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-06T15:53:54.260" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11015" PostTypeId="1" CreationDate="2017-03-06T18:40:54.450" Score="1" ViewCount="622" Body="&lt;p&gt;First off I am by no means an expert so here goes....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 2 hard drive bays on my laptop, I have ordered 2 new hard drives to replace the existing ones with different operating systems pre-installed one on each respectively. One will have Windows &amp;amp; the other Loki as below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HDD 1: Windows 10 (1tb)&#xA;HDD 2: Loki OS (1tb)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is how can I quickly boot into Loki &amp;amp; Windows? Can I switch between the two without going into bios everytime I power up? Is there something like a bootswitcher or boot sequence that when I press a key upon pressing power button, the laptop goes into one OS &amp;amp;  when another key is pressed it goes into the other OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know once I have the 2 hdds arrive I can install them &amp;amp; hold down f2/f12 to get into bios to boot from second drive but really need something that will take a lot less effort &amp;amp; less number of keys pressed to get into either of the operating systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any guidance would be much appreciated &amp;amp; I have intentionally chosen to put Linux on a separate hard drive simply because my laptop has a second hard drive bay &amp;amp; there is no need to partition my first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will be my first time using windows &amp;amp; linux on the same machine but on different drives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kai&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:)&lt;/p&gt;&#xA;" OwnerUserId="8852" LastActivityDate="2017-03-11T17:46:13.173" Title="How to boot into Loki &amp; Windows" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11016" PostTypeId="2" ParentId="11015" CreationDate="2017-03-06T19:07:31.147" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there something like a bootswitcher or boot sequence that when I press a key upon pressing power button, the laptop goes into one OS &amp;amp; when another key is pressed it goes into the other OS?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;elementary, like most Linux distros, comes with the grub bootloader. You can set up your computer to boot into grub automatically. From there, you'll be able to choose whether to boot into Windows or elementary without going into your BIOS settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To set this up, install Windows on your primary drive. Then, start the elementary OS installer and choose &quot;something else...&quot; in the &quot;installation type&quot; dialog. From there, follow &lt;a href=&quot;https://askubuntu.com/a/274405/486628&quot;&gt;these instructions&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before you get started, be sure to back up your data in case something goes wrong with the installation.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It's worth noting that the easier and more common approach would be to install both OSes onto the same hard drive. That way, you could choose your OS from grub instead of going into the BIOS. You could still use your secondary hard drive to store documents and media. This approach requires much less manual work. If you install Windows and then set up elementary, the installer can automatically set up dual boot for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Storing your documents and media on a secondary hard drive also means that you could easily reinstall without losing your files.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-03-07T14:19:28.603" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11018" PostTypeId="2" ParentId="11008" CreationDate="2017-03-06T19:34:31.827" Score="0" Body="&lt;p&gt;I ran into the same issue. The workaround is to copy the image you wish to use into &lt;code&gt;/usr/share/backgrounds&lt;/code&gt; and they will show up in the background options.&lt;/p&gt;&#xA;" OwnerUserId="8854" LastActivityDate="2017-03-06T19:34:31.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11019" PostTypeId="1" AcceptedAnswerId="11027" CreationDate="2017-03-07T01:57:03.397" Score="1" ViewCount="2499" Body="&lt;p&gt;Device - HP 23-q010e&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kernel - 4.4.0-64-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Heres what I've tried:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4898/no-way-to-lock-the-cpu-frequency-to-a-specific-value&quot;&gt;No way to lock the CPU-frequency to a specific value&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The above link only talks about setting the cpu freq on the current boot, but if you reboot, your settings are back to default.  So I thought about going to Applications&gt;System Settings&gt;Applications&gt;Startup and adding custom command: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cpupower -c all frequency-set --max 1.3ghz&#xA;/usr/bin/cpupower -c all frequency-set --max 1.3ghz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Neither one works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/523640/how-i-can-disable-cpu-frequency-scaling-and-set-the-system-to-performance&quot;&gt;https://askubuntu.com/questions/523640/how-i-can-disable-cpu-frequency-scaling-and-set-the-system-to-performance&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried the above setting /etc/init.d/cpufrequtils.  No matter what I set the frequency to, doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.sleeplessbeastie.eu/2015/11/09/how-to-set-cpu-governor-at-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.sleeplessbeastie.eu/2015/11/09/how-to-set-cpu-governor-at-boot/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The above works great for Manjaro, but not Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried inserting the cpupower command into /etc/rc.local:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/bin/cpupower -c all frequency-set --max 1.3ghz&#xA;cpupower -c all frequency-set --max 1.3ghz&#xA;&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sh -c /home/ed/Documents/rclocal &amp;amp;;&#xA;&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Maybe this is why rc.local doesn't work for Elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to start /etc/rc.local Compatibility.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please explain in lamen terms.&lt;/p&gt;&#xA;" OwnerUserId="8410" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-08T17:05:56.000" Title="Set CPU Frequency on reboot" Tags="|release-loki|cpu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11020" PostTypeId="1" CreationDate="2017-03-07T07:39:01.327" Score="1" ViewCount="1067" Body="&lt;p&gt;I ordered an Asus X205TA because it's known to have good support for Ubuntu. Someone made an ISO and lists the instructions, including some patches for basic functionality:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/lopaka/instructions/blob/master/ubuntu-16.04-install-asus-x205ta.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lopaka/instructions/blob/master/ubuntu-16.04-install-asus-x205ta.md&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know Elementary is based on Ununtu. I assume I should install Ubuntu with the ISO /  patches then install Elementary. If that's right, what's the best way to do this so whatever patches from the original install remain in place? If that's wrong what should I do differently?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't care about audio (apparently an issue that needed patching with Ubuntu). Wi-Fi and suspend (or hibernate) are my main requirements. Support for one of the two sleep modes is absolutely critical. It's useless otherwise. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Beyond that, this machine will be a glorified typewriter. With that in mind I want to set it up, back the drive up, and easily restore it on the same or a different machine (if mine gets flaky or is stolen.) I don't want to have to maintain it, it's a writing appliance that should just work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want Windows so dual boot or anything remotely in support of Windows is totally unnecessary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a pretty hardcore nerd but haven't used Linux for much of anything. I can hold my own in macOS terminal for basic things but just pretend (and deride me for being) a n00b. I can take it. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is very much appreciated! &lt;/p&gt;&#xA;" OwnerUserId="3064" LastEditorUserId="3064" LastEditDate="2017-03-07T10:29:38.940" LastActivityDate="2017-03-07T16:07:19.400" Title="Simple install on Asus X205TA (over known good / patched Ubuntu?)" Tags="|system-installation|asus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11021" PostTypeId="1" CreationDate="2017-03-07T08:20:37.310" Score="1" ViewCount="608" Body="&lt;p&gt;I asked this on reddit on r/elementaryos but it says there that this is the more appropriate forum for this sort of question:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a pretty minor problem, but after I boot -- 32-bit eOS 0.3.2 on a Thinkpad x60s laptop -- the USB audio output is on for only one speaker. Changing balance settings, etc., via System Settings / Sound doesn't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can use alsamixer to fix the problem by selecting &quot;USB audio device&quot; and altering the level. Then everything is fine -- correct output from left and right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I reboot, the settings are wrong again. Based on random info from the internet, I have tried running &quot;sudo alsactl store&quot; (as root also) and commenting-out a line in /etc/pulse/default.pa thus: #load-module module-device-restore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Neither of these worked. Does anyone have any advice? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="8858" LastActivityDate="2017-03-07T08:20:37.310" Title="How to save alsamixer settings?" Tags="|sound|multimedia|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11022" PostTypeId="2" ParentId="8504" CreationDate="2017-03-07T09:02:44.150" Score="0" Body="&lt;p&gt;I had pretty much the same problem with display on an external monitor - display was fitted badly; I hardly could see wingpanel or plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I solved it with changing config file in /boot/ directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this file you need to find disable_overscan and change it's value to 1. Then a bit further down you'll find&lt;/p&gt;&#xA;&#xA;&lt;p&gt;overscan_bottom=48&#xA;overscan_left=48&#xA;overscan_right=48&#xA;overscan_top=48&#xA;you can change these values to fit your display into monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then save it and restart computer. It should be fine after few times. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-03-07T09:02:44.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11024" PostTypeId="2" ParentId="11002" CreationDate="2017-03-07T14:40:04.640" Score="0" Body="&lt;p&gt;Use gdebi for everything. In order to install Discord properly you have to use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo gdebi discord-0.0.1.deb&lt;/code&gt; (or whatever version you have)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should and will install this application silently.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-03-07T14:40:04.640" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11025" PostTypeId="2" ParentId="11020" CreationDate="2017-03-07T16:07:19.400" Score="-2" Body="&lt;p&gt;Firstly let's clear your misconception about eOS. elementary is only based on ubuntu. It's not a program that can be run on ubuntu. Ubuntu and elementary are two different OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In layman's term, you are first installing Windows and then MacOS on it so you can use Windows' ram management.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that clears it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Get an ISO image of elementary from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/&lt;/a&gt; &#xA;You may want to try it before installing. Since elementary is based on ubuntu which uses Linux kernel 4.8.x, you may run into problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either you can try Googling for workarounds or ask answers to those problems on this forum, or you can install another distro with an upgraded kernel. I suggest openSUSE Tumbleweed which uses kernel 4.10.&lt;/p&gt;&#xA;" OwnerUserId="8659" LastActivityDate="2017-03-07T16:07:19.400" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11026" PostTypeId="1" CreationDate="2017-03-07T17:12:14.757" Score="0" ViewCount="215" Body="&lt;p&gt;trying to install gparted but gives unmet dependencies error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/62hVO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/62hVO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7862" LastActivityDate="2017-03-07T17:33:34.643" Title="gparted unmet dependencies error while installing" Tags="|ubuntu|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-30T07:42:56.597" ContentLicense="CC BY-SA 3.0" />
  <row Id="11027" PostTypeId="2" ParentId="11019" CreationDate="2017-03-07T17:20:23.257" Score="3" Body="&lt;p&gt;Install TLP &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt install tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then edit the config file - set the governor to powersave&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo scratch-text-editor /etc/default/tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Ensure the following lines are not commented and are as show below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;CPU_SCALING_GOVERNOR_ON_AC=powersave&#xA;CPU_SCALING_GOVERNOR_ON_BAT=powersave&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try setting the CPU governor to performance. This will &quot;lock&quot; the CPU to max speed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install cpufrequtils&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install cpufrequtils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then edit pr create the following file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo scratch-text-editor /etc/default/cpufrequtils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And add the following line to it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; GOVERNOR=&quot;performance&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save and exit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then disable Ondemand daemon to keep your settings on reboot&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo update-rc.d ondemand disable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check your settings with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; cpufreq-info&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work for you, you can try what's listed &lt;a href=&quot;http://www.servernoobs.com/avoiding-cpu-speed-scaling-in-modern-linux-distributions-running-cpu-at-full-speed-tips/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-08T17:05:56.000" LastActivityDate="2017-03-08T17:05:56.000" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="11028" PostTypeId="2" ParentId="11026" CreationDate="2017-03-07T17:33:34.643" Score="0" Body="&lt;p&gt;Try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get clean &amp;amp;&amp;amp; sudo apt-get -f install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, just install it through the app center. Or the tedious way is it lists exactly what you are missing, so you could install each dependency. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-07T17:33:34.643" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="11029" PostTypeId="1" CreationDate="2017-03-08T02:36:36.727" Score="0" ViewCount="1769" Body="&lt;p&gt;I think I have a similar problem to this post, but not sure&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9820/pantheon-desktop-shell-unresponsive-hang-freeze-when-using-kodi&quot;&gt;Pantheon Desktop shell unresponsive / hang / freeze when using kodi&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was doing some work on my Loki desktop on Sunday but had some kind of issue where everything just seemed to be painfully slow. I rebooted and ever since the windows manager will not respond to mouse clicks. The mouse works, sometimes I can click on the dock items, somethings wingpannel, sometimes both, but oonce I open up an application, I can only control that application with the keyboard. I can't click to select anything in the application window, I can't drag and move the window; nothing.&#xA;I noticed there is a much longer lag between login and when the pantheon desktop is fully loaded..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect it may have been caused by a faulty update installation. Is there anyway to fix this without a complete re-installation? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running Loki on a 2006 Mac Pro desktop&#xA;2*Xeon 4-core CPUs&#xA;32gb ddr 3 or 2&#xA;Nvidia GTX970&#xA;EOS is on an SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am editing this because I have narrowed the issue down to either&#xA;1: the Logitech cordless mouse I was using or&#xA;2: clicking on the shutdown icon on wingpannel  &lt;/p&gt;&#xA;" OwnerUserId="6781" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2018-01-19T17:03:35.380" Title="Pantheon not responding to mouse clicks" Tags="|release-loki|updates|mouse|pantheon|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11030" PostTypeId="2" ParentId="3000" CreationDate="2017-03-08T03:12:23.517" Score="2" Body="&lt;p&gt;If I type &lt;code&gt;gsettings set org.pantheon.scratch.settings opened-files []&lt;/code&gt; I get &lt;code&gt;The key &quot;opened-files&quot; doesn't exist&quot;&lt;/code&gt;(something like that. My System is in Spanish). I write what I did in case it helps someone else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed dconf-editor via &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt;, then I opened it and followed the route &lt;code&gt;org » pantheon » scratch » settings&lt;/code&gt; and there I emptied the &lt;code&gt;[]&lt;/code&gt;. It's the same that the command does, but in a visual way.&lt;/p&gt;&#xA;" OwnerUserId="8606" LastActivityDate="2017-03-08T03:12:23.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11032" PostTypeId="1" AcceptedAnswerId="11214" CreationDate="2017-03-08T14:02:54.263" Score="1" ViewCount="161" Body="&lt;p&gt;I think that since I've installed an update on March 6, i started to experience freezes in the system &#xA;Every few hours everything suddenly freezes and leaves no option but to restart the laptop. There's no slowness prior to the freeze.&#xA;Any suggestions on debugging of this?&#xA;Thank you! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Machine: Intel® Core™ i7-4810MQ CPU @ 2.80GHz × 8&#xA;15.3 GiB&#xA;Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)&#xA;NVIDIA Corporation GK106GLM [Quadro K2100M] (rev a1)&#xA;39.5 GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Prior to freeze found these lines in the system logs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="12803" LastEditDate="2019-01-25T05:44:41.850" LastActivityDate="2019-01-25T05:44:41.850" Title="Loki freezes every few hours since monday 6/3" Tags="|release-loki|graphic-drivers|crash|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="11036" PostTypeId="1" CreationDate="2017-03-09T05:52:26.147" Score="1" ViewCount="397" Body="&lt;p&gt;After updating to kernel 4.4 my old realtek will not work anymore, so I tried wirh a TP-Link Archer TU1 but without success...  I would want to ask if exist a WiFi USB dongle that works out of the box with kernel &gt;= 4.4?&lt;/p&gt;&#xA;" OwnerUserId="8873" LastActivityDate="2017-03-11T04:04:14.613" Title="WiFi USB dongle that work" Tags="|release-loki|wifi|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11037" PostTypeId="1" CreationDate="2017-03-09T06:42:39.997" Score="3" ViewCount="183" Body="&lt;p&gt;This happens occasionally when the computer is in use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When this happens, both the bluetooth indicator in the wingpanel and in the bluetooth section of settings seem to hang until I execute the following in the shell.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ rfkill block bluetooth &amp;amp;&amp;amp; rfkill unblock bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This momentary blocking will release the UI and it will either resume the connection to the mouse automatically, or be in the Bluetooth off state which can be switched back on and be used normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any idea why this happens and is there a known way to solve this?&lt;/p&gt;&#xA;" OwnerUserId="8874" LastActivityDate="2017-03-09T06:42:39.997" Title="Bluetooth device disconnects and bluetooth related UI locks up ocassionally" Tags="|release-loki|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11038" PostTypeId="1" CreationDate="2017-03-09T11:01:17.263" Score="0" ViewCount="408" Body="&lt;p&gt;So I have steam installed via a .deb package using Gdebi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The steam icon is available and asked for my password when I run it but then nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what happens if i type steam in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ steam&#xA;Running Steam on elementary 0.4 64-bit&#xA;STEAM_RUNTIME is enabled automatically&#xA;Installing breakpad exception handler for appid(steam)/version(0)&#xA;libGL error: unable to load driver: radeonsi_dri.so&#xA;libGL error: driver pointer missing&#xA;libGL error: failed to load driver: radeonsi&#xA;libGL error: unable to load driver: swrast_dri.so&#xA;libGL error: failed to load driver: swrast&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here are my system specs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel® Core™ i7-4790K CPU @ 4.00GHz × 8&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)&#xA;Advanced Micro Devices, Inc. [AMD/ATI] Tobago PRO [Radeon R7 360 / R9 360 OEM] (rev 81)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any assistance would be greatly appreciated. &lt;/p&gt;&#xA;" OwnerUserId="8714" LastEditorUserId="578" LastEditDate="2017-03-12T18:31:55.433" LastActivityDate="2017-06-10T21:30:36.597" Title="Steam installed but doesn't launch" Tags="|software-installation|graphic-drivers|steam|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11040" PostTypeId="1" CreationDate="2017-03-09T13:25:03.700" Score="0" ViewCount="126" Body="&lt;p&gt;Any time I read an e-mail in Pantheon-mail and click (a link or something)&#xA;I get all the mail scroll (up or down) to the beginning of the mail body.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, if I open a new e-mail (upper half of the image) and JUST CLICK&#xA;the viewer will jump from the very top to the beginning of the mail body (down half of the image).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is true for both right, middle and left click.&#xA;This is true for only the first click per message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: added a bug-report: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1671477&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1671477&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rAo7N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rAo7N.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8617" LastEditorUserId="8617" LastEditDate="2017-09-18T18:48:56.100" LastActivityDate="2019-04-12T05:00:35.077" Title="Pantheon-mail. Click causes scroll up to the e-mail beginning [Solved]" Tags="|release-loki|pantheon-mail|click|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11041" PostTypeId="1" AcceptedAnswerId="11042" CreationDate="2017-03-09T20:33:11.120" Score="0" ViewCount="150" Body="&lt;p&gt;Hi I'm trying to get two buttons into a linked style to perform Zoom In and Zoom Out. However, I'm not able to get the look an feel of the linked buttons like the view mode buttons on Files. Here is an MVCE of the code I have. I have attached a picture of how the buttons should look and what they are looking like now. Thanks in advance for any suggestions.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;using Gtk;&#xA;public class LinkedButtonIssue : Gtk.Window {&#xA;&#xA;  public static int main (string[] args) {&#xA;      Gtk.init (ref args);&#xA;      LinkedButtonIssue window = new LinkedButtonIssue();&#xA;      window.show_all ();&#xA;      //Exit Application Event&#xA;      window.destroy.connect (() =&amp;gt; {&#xA;&#xA;      });&#xA;      Gtk.main ();&#xA;      return 0;&#xA;  }&#xA;&#xA;  public LinkedButtonIssue () {&#xA;      this.title = &quot;Linked Button Issue&quot;;&#xA;      this.window_position = Gtk.WindowPosition.CENTER;&#xA;      this.destroy.connect (Gtk.main_quit);&#xA;      this.set_default_size (800, 600);&#xA;      Gtk.Box uiBox = new Gtk.Box(Orientation.HORIZONTAL, 0);&#xA;      uiBox.set_halign(Align.CENTER);&#xA;      this.add(uiBox);&#xA;&#xA;      Gtk.HeaderBar headerbar = new Gtk.HeaderBar();&#xA;      this.set_titlebar (headerbar);&#xA;      headerbar.set_show_close_button(true);&#xA;&#xA;      Gtk.Image menu_icon_text_large = new Gtk.Image.from_icon_name (&quot;format-text-larger-symbolic&quot;, IconSize.BUTTON);&#xA;      Gtk.Image menu_icon_text_small = new Gtk.Image.from_icon_name (&quot;format-text-smaller-symbolic&quot;, IconSize.BUTTON);&#xA;      Gtk.Button textLargerButton = new Gtk.Button();&#xA;      textLargerButton.set_image (menu_icon_text_large);&#xA;      Gtk.Button textSmallerButton = new Gtk.Button();&#xA;      textSmallerButton.set_image (menu_icon_text_small);&#xA;      Gtk.Box textSizeBox = new Gtk.Box(Orientation.HORIZONTAL, 0);&#xA;&#xA;      textSizeBox.get_style_context().add_class(Gtk.STYLE_CLASS_LINKED);&#xA;      textSizeBox.pack_start(textSmallerButton, false, false);&#xA;      textSizeBox.pack_start(textLargerButton, false, false);&#xA;      headerbar.add(textSizeBox);&#xA;&#xA;  }&#xA;&#xA;}&#xA;//valac --pkg gtk+-3.0 LinkedButtonIssue.vala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zgNYC.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zgNYC.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the code with Granite.Widgets.ModeButton and a screenshot as well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;using Gtk;&#xA;using Granite;&#xA;public class LinkedButtonIssue : Gtk.Window {&#xA;&#xA;  public static int main (string[] args) {&#xA;      Gtk.init (ref args);&#xA;      LinkedButtonIssue window = new LinkedButtonIssue();&#xA;      window.show_all ();&#xA;      //Exit Application Event&#xA;      window.destroy.connect (() =&amp;gt; {&#xA;&#xA;      });&#xA;      Gtk.main ();&#xA;      return 0;&#xA;  }&#xA;&#xA;  public LinkedButtonIssue () {&#xA;      this.title = &quot;Linked Button Issue&quot;;&#xA;      this.window_position = Gtk.WindowPosition.CENTER;&#xA;      this.destroy.connect (Gtk.main_quit);&#xA;      this.set_default_size (800, 600);&#xA;      Gtk.Box uiBox = new Gtk.Box(Orientation.HORIZONTAL, 0);&#xA;      uiBox.set_halign(Align.CENTER);&#xA;      this.add(uiBox);&#xA;&#xA;      Gtk.HeaderBar headerbar = new Gtk.HeaderBar();&#xA;      this.set_titlebar (headerbar);&#xA;      headerbar.set_show_close_button(true);&#xA;&#xA;      Gtk.Image menu_icon_text_large = new Gtk.Image.from_icon_name (&quot;format-text-larger-symbolic&quot;, IconSize.BUTTON);&#xA;      Gtk.Image menu_icon_text_small = new Gtk.Image.from_icon_name (&quot;format-text-smaller-symbolic&quot;, IconSize.BUTTON);&#xA;      Gtk.Button textLargerButton = new Gtk.Button();&#xA;      textLargerButton.set_image (menu_icon_text_large);&#xA;      Gtk.Button textSmallerButton = new Gtk.Button();&#xA;      textSmallerButton.set_image (menu_icon_text_small);&#xA;&#xA;      Granite.Widgets.ModeButton modeButton = new Granite.Widgets.ModeButton();&#xA;      modeButton.append (textSmallerButton);&#xA;      modeButton.append (textLargerButton);&#xA;&#xA;      headerbar.add(modeButton);&#xA;  }&#xA;}&#xA;//valac --pkg gtk+-3.0 --pkg granite LinkedButtonIssue.vala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uZoha.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uZoha.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="613" LastEditDate="2017-03-11T21:55:42.407" LastActivityDate="2017-03-12T16:28:39.587" Title="Use of STYLE_CLASS_LINKED for Linked Buttons" Tags="|vala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11042" PostTypeId="2" ParentId="11041" CreationDate="2017-03-09T21:58:57.203" Score="1" Body="&lt;p&gt;In Files, view switch use &lt;code&gt;Gtk.STYLE_CLASS_FLAT&lt;/code&gt; instead &lt;code&gt;Gtk.STYLE_CLASS_LINKED&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However ,  you can use &lt;code&gt;Granite.Widgets.ModeButton&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see the code at :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-files/trunk/view/head:/src/View/Widgets/TopMenu.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Files on Launchpad: linked &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-files/trunk/view/head:/libwidgets/Chrome/ViewSwitcher.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;Files on Launchpad: ModeButton&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2017-03-12T05:23:11.217" LastActivityDate="2017-03-12T05:23:11.217" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11043" PostTypeId="1" AcceptedAnswerId="11045" CreationDate="2017-03-09T22:02:02.067" Score="1" ViewCount="15306" Body="&lt;p&gt;I am a new user of elementary OS, but I have messed around with various different Linux distros for s few years. My question is quite simple, I need to change the Grub menu to have a different OS (Windows 10, sorry) load first. What I mean is that right now elementary OS is the first OS on the Grub menu, but I need Windows 10 to be the first OS in the Grub menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to add the Grub customizer but I can not seem to do that in elementary, although it has worked in other distros in the past. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Rocky&lt;/p&gt;&#xA;" OwnerUserId="3914" LastEditorUserId="3914" LastEditDate="2017-03-09T22:33:15.997" LastActivityDate="2017-03-10T12:48:13.453" Title="elementary OS 0.4 Loki, How To Edit Grub" Tags="|grub|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11044" PostTypeId="1" CreationDate="2017-03-10T01:51:05.543" Score="0" ViewCount="438" Body="&lt;p&gt;&lt;strong&gt;elementaryOS&lt;/strong&gt; / Ubuntu 16.04.2 LTS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently upgraded memory on my computer to 8 GB and I feel like the swap I have is too big so I want to size it down. However, I noticed that there are 2 partitions on Disks application: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/dev/elementary-vg/swap_1&lt;/code&gt; &lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/dev/mapper/cryptswap&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My memory was 6 GB and I only followed the guides that say to create swap twice your memory, but now I realized that both of these disks are 5.3 GB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;TL;DR&lt;/strong&gt; I'm confused which to resize -- I might only need 2 GB swap or delete it completely.&lt;/p&gt;&#xA;" OwnerUserId="8886" LastEditorUserId="84" LastEditDate="2018-05-15T12:30:13.160" LastActivityDate="2018-05-15T12:30:13.160" Title="Which swap should I resize?" Tags="|ubuntu|disk-management|swap|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11045" PostTypeId="2" ParentId="11043" CreationDate="2017-03-10T07:14:04.937" Score="2" Body="&lt;p&gt;There is a file /etc/default/grub&#xA;You may change a line there, saying&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;GRUB_DEFAULT=0&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Uncommenting and changing it to&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;GRUB_DEFAULT=SOME_NUMBER&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;will change the default line in your grub screen to the &amp;quot;SOME_NUMBER+1&amp;quot;.&#xA;So &lt;strong&gt;if your windows 10 line is the 2nd then you need GRUB_DEFAULT=1&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;To do this it is better to make the backup of the file, change the line and update grub. The commands are:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo cp /etc/default/grub /etc/default/grub_ORIGINAL_BACKUP&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch-text-editor /etc/default/grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;change the line and then&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The windows line will stay where it was, but will become default.&lt;/p&gt;&#xA;" OwnerUserId="8617" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-10T07:14:04.937" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11046" PostTypeId="2" ParentId="11044" CreationDate="2017-03-10T07:25:44.577" Score="2" Body="&lt;p&gt;In fact, having the swap space twice the size of your RAM is only a guideline. Actually with 8 GB of physical RAM you won't need much swap space: you might want to keep the one and delete the other partition. If you want to use swap encryption you should keep the &lt;code&gt;cryptswap&lt;/code&gt; if not, keep the other one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, &lt;strong&gt;to hibernate you must have at least the same amount of swap &lt;em&gt;free&lt;/em&gt; as you do RAM &lt;em&gt;used&lt;/em&gt;.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="26" LastEditDate="2017-04-01T17:40:55.753" LastActivityDate="2017-04-01T17:40:55.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11047" PostTypeId="1" CreationDate="2017-03-10T08:42:41.417" Score="0" ViewCount="417" Body="&lt;p&gt;I will be removing Ubuntu from my system but I would like to keep Unity shell in my system. As the other distro I use is a Arch distro so Unity can't be installed there. So can I install a bare bones Unity 7 shell in my elementary OS 0.4 ????&lt;/p&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-03-13T14:26:43.267" Title="Can I safely install a bare bone Unity Shell in elementaryOS 0.4?" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11049" PostTypeId="1" CreationDate="2017-03-10T10:18:24.967" Score="1" ViewCount="155" Body="&lt;p&gt;I have a Mac keyboard and I would like to know if I could use the Mission Control key (f3) instead of Super+s (Multitasking view) on Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to set it up, but the closest I got is super+f3, but I'm not too happy about that.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2017-03-10T10:18:24.967" Title="Mission Control key on a Mac keyboard" Tags="|release-loki|keyboard|multitasking-view|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11050" PostTypeId="2" ParentId="11043" CreationDate="2017-03-10T12:48:13.453" Score="0" Body="&lt;p&gt;This worked for me to get Grub Customizer installed.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:danielrichter2007/grub-customizer&#xA;sudo apt update&#xA;sudo apt install grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-10T12:48:13.453" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="11053" PostTypeId="1" AcceptedAnswerId="11088" CreationDate="2017-03-10T16:25:08.860" Score="1" ViewCount="360" Body="&lt;p&gt;For example, Firefox should always open up in workspace 8, Emacs in 2 and so on. All methods online which use ccsm, gnome tweak, etc are geared to gnome or unity. Devilspie was suggested somewhere, but couldn't get it to work in this case. Is there any way to implement this in Loki? &lt;/p&gt;&#xA;" OwnerUserId="8894" LastActivityDate="2017-04-11T20:07:00.383" Title="How to set applications to open in specific workspaces in Loki?" Tags="|workspace|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-14T00:42:20.583" ContentLicense="CC BY-SA 3.0" />
  <row Id="11054" PostTypeId="2" ParentId="10547" CreationDate="2017-03-10T17:03:12.173" Score="0" Body="&lt;p&gt;There's not a direct &quot;upgrade&quot; path from Ubuntu to elementary OS. You'll need to install elementary OS, then copy your files over and re-install your applications. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are a few ways to do this. You could:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Move your content to another partition, and then replace Ubuntu with elementary OS. (See above answer for details.)&lt;/li&gt;&#xA;&lt;li&gt;Back up your files to a third-party service such as &lt;a href=&quot;http://getdropbox.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dropbox&lt;/a&gt;, &lt;a href=&quot;https://www.google.com/drive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Google Drive&lt;/a&gt;, or &lt;a href=&quot;https://spideroak.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;SpiderOak&lt;/a&gt;. Then, completely overwrite Ubuntu with a fresh install of elementary OS, and re-download your files.&lt;/li&gt;&#xA;&lt;li&gt;Install elementary OS alongside Ubuntu. Copy your files from the Ubuntu partition to the elementary partition. Once you're ready, delete the partition containing Ubuntu.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The installer should be able to handle a clean install or a dual boot setup for you. You'll see a message like the screenshot below. (It will say &quot;Ubuntu&quot; instead of &quot;Windows 10&quot;, though! )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: the &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dropbox for elementary OS&lt;/a&gt; installation script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Bz4iz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Bz4iz.png&quot; alt=&quot;elementary OS installer&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;http://linoxide.com/linux-how-to/install-elementary-loki-usb-dual-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Image source: LinOxide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2017-03-10T17:17:46.340" LastActivityDate="2017-03-10T17:17:46.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11055" PostTypeId="2" ParentId="11047" CreationDate="2017-03-10T17:39:21.893" Score="0" Body="&lt;p&gt;Do you mean the terminal emulator? if so ubuntu use's gnome-terminal? or do you mean install a just ubuntu system with no xserver? &quot;Unity&quot; is the desktop flavor along with the display manager that it comes with im not sure what a unity shell is.&lt;/p&gt;&#xA;" OwnerUserId="8539" LastActivityDate="2017-03-10T17:39:21.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11056" PostTypeId="2" ParentId="11047" CreationDate="2017-03-10T18:44:22.967" Score="4" Body="&lt;p&gt;Installing another desktop environment on elementary OS will probably break things. The elementary apps are designed for GTK+ and Granite, and they may not work properly under Unity. Additionally, I don't believe that Pantheon Greeter provides a way to choose your desktop environment at login. [Edit] I may be wrong about that last part - see the comment below!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10339/792&quot;&gt;this comment on installing the Budgie DE&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd still like to proceed, I'd recommend setting up elementary on a virtual machine and trying to set up Unity there before trying this on your primary OS.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-13T14:26:43.267" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11057" PostTypeId="2" ParentId="4404" CreationDate="2017-03-10T19:19:51.217" Score="1" Body="&lt;p&gt;This has basically been asked. This should fix your problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7734/how-to-adjust-wingpanel-transparency-in-loki&quot;&gt;How to adjust wingpanel transparency in loki?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, I would suggest changing to a different theme then back to elementary. Since the wingpanel theme is dictated by the GTK theme this might just reset things back to the way they should be.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-10T19:19:51.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11058" PostTypeId="2" ParentId="10998" CreationDate="2017-03-10T19:45:25.057" Score="2" Body="&lt;p&gt;Just as the post you linked says you can open the file by entering &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /usr/share/themes/elementary/gtk-3.0/apps.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in the terminal. Once it's open look for the section that starts with this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*******&#xA;* Gala *&#xA;*******/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The default CSS code looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.gala-notification {&#xA;    border: none;&#xA;    border-radius: 4px;&#xA;    background-color: transparent;&#xA;    background-image:&#xA;        linear-gradient(&#xA;            to bottom,&#xA;            @bg_color,&#xA;            @bg_color 80%,&#xA;            shade (&#xA;                @bg_color,&#xA;                0.94&#xA;            )&#xA;        );&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You need to change it to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.gala-notification {&#xA;    border: none;&#xA;    border-radius: 4px;&#xA;    background-color: transparent;&#xA;    background-image:&#xA;        linear-gradient(&#xA;            to bottom,&#xA;            @bg_color,&#xA;            @bg_color 80%,&#xA;            shade (&#xA;                @bg_color,&#xA;                0.94&#xA;            )&#xA;        );&#xA;&#xA;.gala-notification GtkLabel {&#xA;    color: #fff;&#xA; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Log out then log back in. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-10T19:51:36.343" LastActivityDate="2017-03-10T19:51:36.343" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11059" PostTypeId="1" CreationDate="2017-03-10T19:56:04.423" Score="0" ViewCount="1081" Body="&lt;p&gt;Just like &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1/can-i-swap-the-close-buttons-from-the-left-to-the-right&quot;&gt;this post&lt;/a&gt; I have been traditionally a windows user and would like to have my buttons on the right hand side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't find &lt;strong&gt;org.pantheon.desktop.gala.appearance button-layout&lt;/strong&gt; but did have &lt;strong&gt;org.gnome.desktop.wm.preferences button-layout&lt;/strong&gt;. I changed the settings to **':minimize,maximize,close'* logged out and nothing and then restarted and nothing. The settings are there but have not taken effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Im on &lt;strong&gt;OS X El Capitan&lt;/strong&gt; and used the &lt;strong&gt;gsettings set org.gnome.desktop.wm.preferences button-layout :minimize,maximize,close&lt;/strong&gt; command. I have read online that this particular version was designed to block customization much more than previously available and have not been able to find a working solution online. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="8896" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-03-10T21:15:42.617" Title="Can I swap the close bottons from left to right: Gnome" Tags="|user-interface|microsoft-windows|navigation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11060" PostTypeId="2" ParentId="11059" CreationDate="2017-03-10T20:23:50.917" Score="1" Body="&lt;h2&gt;Installing elementary tweaks would be an easy graphical solution of customizing your system.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Here's a link to the git repo &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is true that elementary os loki does block customization by not having the&#xA;software-properties-common package preinstalled. Without this package you cannot a PPA to your system.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Installing elementary-tweaks&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install software-properties-common&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install elementary-tweaks&lt;/p&gt;&#xA;" OwnerUserId="8897" LastActivityDate="2017-03-10T20:23:50.917" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11061" PostTypeId="2" ParentId="11059" CreationDate="2017-03-10T21:15:42.617" Score="1" Body="&lt;p&gt;You can use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;':close,minimize,maximize'&amp;gt;}&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;from terminal. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-03-10T21:15:42.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11062" PostTypeId="2" ParentId="11036" CreationDate="2017-03-11T04:04:14.613" Score="1" Body="&lt;p&gt;I have used the &lt;a href=&quot;https://amzn.com/B003MTTJOY&quot; rel=&quot;nofollow noreferrer&quot;&gt;Edimax EW-7811Un&lt;/a&gt; adapter with elementary OS. It is advertised as supporting Linux and is a popular choice for Raspberry Pi projects, which means it's nice and small, relatively inexpensive, and well-reviewed.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-03-11T04:04:14.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11063" PostTypeId="1" AcceptedAnswerId="12175" CreationDate="2017-03-11T15:16:59.650" Score="2" ViewCount="5218" Body="&lt;p&gt;Using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in Terminal gives me&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package appcenter is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;E: Package 'appcenter' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8901" LastActivityDate="2023-04-03T20:01:41.100" Title="How can I reinstall the AppCenter" Tags="|release-loki|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11064" PostTypeId="1" CreationDate="2017-03-11T15:52:00.713" Score="3" ViewCount="2299" Body="&lt;p&gt;My iPhone (5S, iOS 10.2.1) is recognized in the Files and Photos applications (it appears in the side bar in each) but neither can access the photos on the device. I am doing the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;unlock iPhone&lt;/li&gt;&#xA;&lt;li&gt;connect iPhone via USB cable to machine running elementary&lt;/li&gt;&#xA;&lt;li&gt;select 'Trust' from dialog appearing on iPhone screen&lt;/li&gt;&#xA;&lt;li&gt;open Files / Photos&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;In Files, I see a single folder on the iPhone, store_00010001, but it shows as empty in Properties and when I click to view contents (see below).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Photos gives me the error shown further below. Can anyone indicate how to troubleshoot these issues? (I'd prefer to simply get access through Files, as I don't like photo manager software).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YjR05.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YjR05.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RMP1z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RMP1z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8123" LastEditorUserId="8123" LastEditDate="2017-03-11T20:21:38.287" LastActivityDate="2023-12-18T02:06:30.820" Title="Access photos on iPhone" Tags="|release-loki|usb|iphone|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11065" PostTypeId="1" CreationDate="2017-03-11T16:06:41.700" Score="0" ViewCount="267" Body="&lt;p&gt;I have reinstalled Steam but when I try to run it from terminal, it gives me this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Repairing installation, linking /home/blade/.steam/steam to /home/blade/.local/share/Steam&#xA;Running Steam on elementary 0.4 64-bit&#xA;STEAM_RUNTIME is enabled automatically&#xA;Installing breakpad exception handler for appid(steam)/version(0)&#xA;*** Error in `/home/blade/.local/share/Steam/ubuntu12_32/steam': free(): invalid pointer: 0xffa59690 ***&#xA;======= Backtrace: =========&#xA;/lib/i386-linux-gnu/libc.so.6(+0x67377)[0xf737b377]&#xA;/lib/i386-linux-gnu/libc.so.6(+0x6d2f7)[0xf73812f7]&#xA;/lib/i386-linux-gnu/libc.so.6(+0x6dbb1)[0xf7381bb1]&#xA;/home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6(XFree+0x1b)[0xf76aef1b]&#xA;/home/blade/.local/share/Steam/ubuntu12_32/steam(+0x51406)[0x56629406]&#xA;/home/blade/.local/share/Steam/ubuntu12_32/steam(+0x520ee)[0x5662a0ee]&#xA;/home/blade/.local/share/Steam/ubuntu12_32/steam(+0x22420)[0x565fa420]&#xA;/lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xf7)[0xf732c637]&#xA;/home/blade/.local/share/Steam/ubuntu12_32/steam(+0x25ae9)[0x565fdae9]&#xA;======= Memory map: ========&#xA;565d8000-56989000 r-xp 00000000 08:04 4070159                            /home/blade/.local/share/Steam/ubuntu12_32/steam&#xA;56989000-5699d000 r--p 003b1000 08:04 4070159                            /home/blade/.local/share/Steam/ubuntu12_32/steam&#xA;5699d000-569aa000 rw-p 003c5000 08:04 4070159                            /home/blade/.local/share/Steam/ubuntu12_32/steam&#xA;569aa000-569ce000 rw-p 00000000 00:00 0 &#xA;56ce2000-56e55000 rw-p 00000000 00:00 0                                  [heap]&#xA;f6000000-f6021000 rw-p 00000000 00:00 0 &#xA;f6021000-f6100000 ---p 00000000 00:00 0 &#xA;f61b6000-f61bd000 r--s 00000000 08:03 1584139                            /usr/lib/i386-linux-gnu/gconv/gconv-modules.cache&#xA;f61bd000-f61d6000 r-xp 00000000 08:03 1188344                            /lib/i386-linux-gnu/libz.so.1.2.8&#xA;f61d6000-f61d7000 r--p 00018000 08:03 1188344                            /lib/i386-linux-gnu/libz.so.1.2.8&#xA;f61d7000-f61d8000 rw-p 00019000 08:03 1188344                            /lib/i386-linux-gnu/libz.so.1.2.8&#xA;f61d8000-f61e2000 r-xp 00000000 08:03 1584843                            /usr/lib/i386-linux-gnu/libpciaccess.so.0.11.1&#xA;f61e2000-f61e3000 r--p 00009000 08:03 1584843                            /usr/lib/i386-linux-gnu/libpciaccess.so.0.11.1&#xA;f61e3000-f61e4000 rw-p 0000a000 08:03 1584843                            /usr/lib/i386-linux-gnu/libpciaccess.so.0.11.1&#xA;f61e4000-f61f8000 r-xp 00000000 08:03 1188326                            /lib/i386-linux-gnu/libgpg-error.so.0.17.0&#xA;f61f8000-f61f9000 r--p 00013000 08:03 1188326                            /lib/i386-linux-gnu/libgpg-error.so.0.17.0&#xA;f61f9000-f61fa000 rw-p 00014000 08:03 1188326                            /lib/i386-linux-gnu/libgpg-error.so.0.17.0&#xA;f61fa000-f6206000 r-xp 00000000 08:03 1570703                            /usr/lib/i386-linux-gnu/libdrm_radeon.so.1.0.1&#xA;f6206000-f6207000 r--p 0000b000 08:03 1570703                            /usr/lib/i386-linux-gnu/libdrm_radeon.so.1.0.1&#xA;f6207000-f6208000 rw-p 0000c000 08:03 1570703                            /usr/lib/i386-linux-gnu/libdrm_radeon.so.1.0.1&#xA;f6208000-f6210000 r-xp 00000000 08:03 1570699                            /usr/lib/i386-linux-gnu/libdrm_nouveau.so.2.0.0&#xA;f6210000-f6211000 r--p 00007000 08:03 1570699                            /usr/lib/i386-linux-gnu/libdrm_nouveau.so.2.0.0&#xA;f6211000-f6212000 rw-p 00008000 08:03 1570699                            /usr/lib/i386-linux-gnu/libdrm_nouveau.so.2.0.0&#xA;f6212000-f6235000 r-xp 00000000 08:03 1570695                            /usr/lib/i386-linux-gnu/libdrm_intel.so.1.0.0&#xA;f6235000-f6236000 r--p 00022000 08:03 1570695                            /usr/lib/i386-linux-gnu/libdrm_intel.so.1.0.0&#xA;f6236000-f6237000 rw-p 00023000 08:03 1570695                            /usr/lib/i386-linux-gnu/libdrm_intel.so.1.0.0&#xA;f6237000-f62e2000 r-xp 00000000 08:03 1188328                            /lib/i386-linux-gnu/libgcrypt.so.20.0.5&#xA;f62e2000-f62e3000 r--p 000aa000 08:03 1188328                            /lib/i386-linux-gnu/libgcrypt.so.20.0.5&#xA;f62e3000-f62e6000 rw-p 000ab000 08:03 1188328                            /lib/i386-linux-gnu/libgcrypt.so.20.0.5&#xA;f62e6000-f6a00000 r-xp 00000000 08:03 1570716                            /usr/lib/i386-linux-gnu/dri/i965_dri.so&#xA;f6a00000-f6a01000 ---p 0071a000 08:03 1570716                            /usr/lib/i386-linux-gnu/dri/i965_dri.so&#xA;f6a01000-f6a2a000 r--p 0071a000 08:03 1570716                            /usr/lib/i386-linux-gnu/dri/i965_dri.so&#xA;f6a2a000-f6a30000 rw-p 00743000 08:03 1570716                            /usr/lib/i386-linux-gnu/dri/i965_dri.so&#xA;f6a30000-f6a36000 rw-p 00000000 00:00 0 &#xA;f6a36000-f6a55000 r-xp 00000000 08:03 1188342                            /lib/i386-linux-gnu/libudev.so.1.6.4&#xA;f6a55000-f6a56000 r--p 0001e000 08:03 1188342                            /lib/i386-linux-gnu/libudev.so.1.6.4&#xA;f6a56000-f6a57000 rw-p 0001f000 08:03 1188342                            /lib/i386-linux-gnu/libudev.so.1.6.4&#xA;f6a57000-f6a67000 r-xp 00000000 08:03 1569819                            /usr/lib/i386-linux-gnu/libdrm.so.2.4.0&#xA;f6a67000-f6a68000 r--p 0000f000 08:03 1569819                            /usr/lib/i386-linux-gnu/libdrm.so.2.4.0&#xA;f6a68000-f6a69000 rw-p 00010000 08:03 1569819                            /usr/lib/i386-linux-gnu/libdrm.so.2.4.0&#xA;f6a69000-f6a6e000 r-xp 00000000 08:03 1584343                            /usr/lib/i386-linux-gnu/libXxf86vm.so.1.0.0&#xA;f6a6e000-f6a6f000 r--p 00004000 08:03 1584343                            /usr/lib/i386-linux-gnu/libXxf86vm.so.1.0.0&#xA;f6a6f000-f6a70000 rw-p 00005000 08:03 1584343                            /usr/lib/i386-linux-gnu/libXxf86vm.so.1.0.0&#xA;f6a70000-f6a74000 r-xp 00000000 08:03 1584831                            /usr/lib/i386-linux-gnu/libxcb-dri2.so.0.0.0&#xA;f6a74000-f6a75000 r--p 00003000 08:03 1584831                            /usr/lib/i386-linux-gnu/libxcb-dri2.so.0.0.0&#xA;f6a75000-f6a76000 rw-p 00004000 08:03 1584831                            /usr/lib/i386-linux-gnu/libxcb-dri2.so.0.0.0&#xA;f6a76000-f6a8e000 r-xp 00000000 08:03 1584835                            /usr/lib/i386-linux-gnu/libxcb-glx.so.0.0.0&#xA;f6a8e000-f6a8f000 ---p 00018000 08:03 1584835                            /usr/lib/i386-linux-gnu/libxcb-glx.so.0.0.0&#xA;f6a8f000-f6a90000 r--p 00018000 08:03 1584835                            /usr/lib/i386-linux-gnu/libxcb-glx.so.0.0.0&#xA;f6a90000-f6a91000 rw-p 00019000 08:03 1584835                            /usr/lib/i386-linux-gnu/libxcb-glx.so.0.0.0&#xA;f6a91000-f6a92000 r-xp 00000000 08:03 1584829                            /usr/lib/i386-linux-gnu/libX11-xcb.so.1.0.0&#xA;f6a92000-f6a93000 r--p 00000000 08:03 1584829                            /usr/lib/i386-linux-gnu/libX11-xcb.so.1.0.0&#xA;f6a93000-f6a94000 rw-p 00001000 08:03 1584829                            /usr/lib/i386-linux-gnu/libX11-xcb.so.1.0.0&#xA;f6a94000-f6a99000 r-xp 00000000 08:03 1584329                            /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0&#xA;f6a99000-f6a9a000 r--p 00004000 08:03 1584329                            /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0&#xA;f6a9a000-f6a9b000 rw-p 00005000 08:03 1584329                            /usr/lib/i386-linux-gnu/libXfixes.so.3.1.0&#xA;f6a9b000-f6a9d000 r-xp 00000000 08:03 1584335                            /usr/lib/i386-linux-gnu/libXdamage.so.1.1.0&#xA;f6a9d000-f6a9e000 r--p 00001000 08:03 1584335                            /usr/lib/i386-linux-gnu/libXdamage.so.1.1.0&#xA;f6a9e000-f6a9f000 rw-p 00002000 08:03 1584335                            /usr/lib/i386-linux-gnu/libXdamage.so.1.1.0&#xA;f6a9f000-f6ab2000 r-xp 00000000 08:03 1570730                            /usr/lib/i386-linux-gnu/libglapi.so.0.0.0&#xA;f6ab2000-f6ab3000 ---p 00013000 08:03 1570730                            /usr/lib/i386-linux-gnu/libglapi.so.0.0.0&#xA;f6ab3000-f6ab5000 r--p 00013000 08:03 1570730                            /usr/lib/i386-linux-gnu/libglapi.so.0.0.0&#xA;f6ab5000-f6abb000 rwxp 00015000 08:03 1570730                            /usr/lib/i386-linux-gnu/libglapi.so.0.0.0&#xA;f6abb000-f6ae1000 r-xp 00000000 08:03 1188340                            /lib/i386-linux-gnu/libexpat.so.1.6.0&#xA;f6ae1000-f6ae2000 ---p 00026000 08:03 1188340                            /lib/i386-linux-gnu/libexpat.so.1.6.0&#xA;f6ae2000-f6ae4000 r--p 00026000 08:03 1188340                            /lib/i386-linux-gnu/libexpat.so.1.6.0&#xA;f6ae4000-f6ae5000 rw-p 00028000 08:03 1188340                            /lib/i386-linux-gnu/libexpat.so.1.6.0&#xA;f6ae5000-f6b4f000 r-xp 00000000 08:03 1709395                            /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2.0&#xA;f6b4f000-f6b51000 r--p 00069000 08:03 1709395                            /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2.0&#xA;f6b51000-f6b56000 rwxp 0006b000 08:03 1709395                            /usr/lib/i386-linux-gnu/mesa/libGL.so.1.2.0&#xA;f6b5c000-f6b7e000 r--p 00000000 08:03 144845                             /usr/share/locale-langpack/it/LC_MESSAGES/libc.mo&#xA;f6b7e000-f6bba000 r-xp 00000000 08:04 4070155                            /home/blade/.local/share/Steam/ubuntu12_32/crashhandler.so&#xA;f6bba000-f6bbb000 r--p 0003c000 08:04 4070155                            /home/blade/.local/share/Steam/ubuntu12_32/crashhandler.so&#xA;f6bbb000-f6bbc000 rw-p 0003d000 08:04 4070155                            /home/blade/.local/share/Steam/ubuntu12_32/crashhandler.so&#xA;f6bbc000-f6f95000 rw-p 00000000 00:00 0 &#xA;f6f95000-f70c5000 r--p 004ab000 08:03 1441954                            /usr/lib/locale/locale-archive&#xA;f70c5000-f72c5000 r--p 00000000 08:03 1441954                            /usr/lib/locale/locale-archive&#xA;f72c5000-f72c8000 rw-p 00000000 00:00 0 &#xA;f72c8000-f72cd000 r-xp 00000000 08:04 4325603                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0&#xA;f72cd000-f72ce000 r--p 00004000 08:04 4325603                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0&#xA;f72ce000-f72cf000 rw-p 00005000 08:04 4325603                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXdmcp.so.6.0.0&#xA;f72cf000-f72d1000 r-xp 00000000 08:04 4325699                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0&#xA;f72d1000-f72d2000 r--p 00001000 08:04 4325699                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0&#xA;f72d2000-f72d3000 rw-p 00002000 08:04 4325699                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXau.so.6.0.0&#xA;f72d3000-f72d4000 rw-p 00000000 00:00 0 &#xA;f72d4000-f72f0000 r-xp 00000000 08:04 790012                             /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1&#xA;f72f0000-f72f1000 r--p 0001b000 08:04 790012                             /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1&#xA;f72f1000-f72f2000 rw-p 0001c000 08:04 790012                             /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1&#xA;f72f2000-f7312000 r-xp 00000000 08:04 4325702                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0&#xA;f7312000-f7313000 r--p 0001f000 08:04 4325702                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0&#xA;f7313000-f7314000 rw-p 00020000 08:04 4325702                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libxcb.so.1.1.0&#xA;f7314000-f74c3000 r-xp 00000000 08:03 1182654                            /lib/i386-linux-gnu/libc-2.23.so&#xA;f74c3000-f74c4000 ---p 001af000 08:03 1182654                            /lib/i386-linux-gnu/libc-2.23.so&#xA;f74c4000-f74c6000 r--p 001af000 08:03 1182654                            /lib/i386-linux-gnu/libc-2.23.so&#xA;f74c6000-f74c7000 rw-p 001b1000 08:03 1182654                            /lib/i386-linux-gnu/libc-2.23.so&#xA;f74c7000-f74ca000 rw-p 00000000 00:00 0 &#xA;f74ca000-f74e3000 r-xp 00000000 08:03 1182713                            /lib/i386-linux-gnu/libpthread-2.23.so&#xA;f74e3000-f74e4000 r--p 00018000 08:03 1182713                            /lib/i386-linux-gnu/libpthread-2.23.so&#xA;f74e4000-f74e5000 rw-p 00019000 08:03 1182713                            /lib/i386-linux-gnu/libpthread-2.23.so&#xA;f74e5000-f74e7000 rw-p 00000000 00:00 0 &#xA;f74e7000-f75e2000 r-xp 00000000 08:04 4325701                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.21&#xA;f75e2000-f75e6000 r--p 000fa000 08:04 4325701                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.21&#xA;f75e6000-f75e7000 rw-p 000fe000 08:04 4325701                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6.0.21&#xA;f75e7000-f75ea000 rw-p 00000000 00:00 0 &#xA;f75ea000-f75ed000 r-xp 00000000 08:03 1182644                            /lib/i386-linux-gnu/libdl-2.23.so&#xA;f75ed000-f75ee000 r--p 00002000 08:03 1182644                            /lib/i386-linux-gnu/libdl-2.23.so&#xA;f75ee000-f75ef000 rw-p 00003000 08:03 1182644                            /lib/i386-linux-gnu/libdl-2.23.so&#xA;f75ef000-f7642000 r-xp 00000000 08:03 1182711                            /lib/i386-linux-gnu/libm-2.23.so&#xA;f7642000-f7643000 r--p 00052000 08:03 1182711                            /lib/i386-linux-gnu/libm-2.23.so&#xA;f7643000-f7644000 rw-p 00053000 08:03 1182711                            /lib/i386-linux-gnu/libm-2.23.so&#xA;f7644000-f764b000 r-xp 00000000 08:03 1182638                            /lib/i386-linux-gnu/librt-2.23.so&#xA;f764b000-f764c000 r--p 00006000 08:03 1182638                            /lib/i386-linux-gnu/librt-2.23.so&#xA;f764c000-f764d000 rw-p 00007000 08:03 1182638                            /lib/i386-linux-gnu/librt-2.23.so&#xA;f764d000-f764e000 rw-p 00000000 00:00 0 &#xA;f764e000-f765e000 r-xp 00000000 08:04 4325595                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXext.so.6.4.0&#xA;f765e000-f765f000 r--p 0000f000 08:04 4325595                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXext.so.6.4.0&#xA;f765f000-f7660000 rw-p 00010000 08:04 4325595                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libXext.so.6.4.0&#xA;f7660000-f7661000 r-xp 00000000 08:03 1584341                            /usr/lib/i386-linux-gnu/libxshmfence.so.1.0.0&#xA;f7661000-f7662000 r--p 00000000 08:03 1584341                            /usr/lib/i386-linux-gnu/libxshmfence.so.1.0.0&#xA;f7662000-f7663000 rw-p 00001000 08:03 1584341                            /usr/lib/i386-linux-gnu/libxshmfence.so.1.0.0&#xA;f7663000-f7668000 r-xp 00000000 08:03 1584839                            /usr/lib/i386-linux-gnu/libxcb-sync.so.1.0.0&#xA;f7668000-f7669000 ---p 00005000 08:03 1584839                            /usr/lib/i386-linux-gnu/libxcb-sync.so.1.0.0&#xA;f7669000-f766a000 r--p 00005000 08:03 1584839                            /usr/lib/i386-linux-gnu/libxcb-sync.so.1.0.0&#xA;f766a000-f766b000 rw-p 00006000 08:03 1584839                            /usr/lib/i386-linux-gnu/libxcb-sync.so.1.0.0&#xA;f766b000-f766d000 r-xp 00000000 08:03 1584837                            /usr/lib/i386-linux-gnu/libxcb-present.so.0.0.0&#xA;f766d000-f766e000 r--p 00001000 08:03 1584837                            /usr/lib/i386-linux-gnu/libxcb-present.so.0.0.0&#xA;f766e000-f766f000 rw-p 00002000 08:03 1584837                            /usr/lib/i386-linux-gnu/libxcb-present.so.0.0.0&#xA;f766f000-f7671000 r-xp 00000000 08:03 1584833                            /usr/lib/i386-linux-gnu/libxcb-dri3.so.0.0.0&#xA;f7671000-f7672000 r--p 00001000 08:03 1584833                            /usr/lib/i386-linux-gnu/libxcb-dri3.so.0.0.0&#xA;f7672000-f7673000 rw-p 00002000 08:03 1584833                            /usr/lib/i386-linux-gnu/libxcb-dri3.so.0.0.0&#xA;f7673000-f7674000 r--p 00718000 08:03 1441954                            /usr/lib/locale/locale-archive&#xA;f7674000-f7675000 r--p 008a0000 08:03 1441954                            /usr/lib/locale/locale-archive&#xA;f7675000-f77a5000 r-xp 00000000 08:04 4325616                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0&#xA;f77a5000-f77a6000 r--p 00130000 08:04 4325616                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0&#xA;f77a6000-f77a8000 rw-p 00131000 08:04 4325616                            /home/blade/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libX11.so.6.3.0&#xA;f77a8000-f77ab000 rw-p 00000000 00:00 0 &#xA;f77ab000-f77ad000 r--p 00000000 00:00 0                                  [vvar]&#xA;f77ad000-f77ae000 r-xp 00000000 00:00 0                                  [vdso]&#xA;f77ae000-f77d0000 r-xp 00000000 08:03 1182569                            /lib/i386-linux-gnu/ld-2.23.so&#xA;f77d0000-f77d1000 rw-p 00000000 00:00 0 &#xA;f77d1000-f77d2000 r--p 00022000 08:03 1182569                            /lib/i386-linux-gnu/ld-2.23.so&#xA;f77d2000-f77d3000 rw-p 00023000 08:03 1182569                            /lib/i386-linux-gnu/ld-2.23.so&#xA;ffa3d000-ffa5f000 rw-p 00000000 00:00 0                                  [stack]&#xA;ILocalize::AddFile() failed to load file &quot;public/steambootstrapper_english.txt&quot;.&#xA;[2017-03-11 17:00:10] Startup - updater built Nov 23 2016 01:05:42&#xA;assert_20170311170010_1.dmp[13956]: Uploading dump (out-of-process)&#xA;/tmp/dumps/assert_20170311170010_1.dmp&#xA;assert_20170311170010_1.dmp[13956]: Finished uploading minidump (out-of-process): success = no&#xA;assert_20170311170010_1.dmp[13956]: error: libcurl.so: cannot open shared object file: No such file or directory&#xA;assert_20170311170010_1.dmp[13956]: file ''/tmp/dumps/assert_20170311170010_1.dmp'', upload no: ''libcurl.so: cannot open shared object file: No such file or directory''&#xA;/home/blade/.local/share/Steam/steam.sh: riga 713: 13953 Annullato               (core dump creato) $STEAM_DEBUGGER &quot;$STEAMROOT/$STEAMEXEPATH&quot; &quot;$@&quot;&#xA;/home/blade/.local/share/Steam/steam.sh: riga 444: nessuna corrispondenza: ssfn*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I want to specify that I installed Steam before and worked perfectly but I uninstalled it because I didn't play too much.&#xA;Does anyone know how to fix this?&#xA;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="8290" LastActivityDate="2024-04-07T04:04:45.553" Title="Cannot open Steam (weird error on terminal)" Tags="|steam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11066" PostTypeId="2" ParentId="8850" CreationDate="2017-03-11T16:16:08.217" Score="1" Body="&lt;p&gt;There seems to be an issue with kernel 4.4.0 to 4.5 with open source video drivers.&#xA;I am no expert but I found this to be a common thread among people with this problem.&#xA;I updated kernel to 4.6 and it seems to have resolved the issue, albeit creating some smaller issues I am now working on...&lt;/p&gt;&#xA;" OwnerUserId="8901" LastActivityDate="2017-03-11T16:16:08.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11067" PostTypeId="2" ParentId="11065" CreationDate="2017-03-11T16:56:51.310" Score="0" Body="&lt;p&gt;try delete .steam in your home directory (It's hidden so you have to show hidden files). Then steam will start all over, hopefully it will fix your problem.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2017-03-11T16:56:51.310" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="11068" PostTypeId="1" CreationDate="2017-03-11T17:22:09.340" Score="1" ViewCount="498" Body="&lt;p&gt;I'm using elementary OS loki in a HP laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know why, but sometimes I cannot hear any sound coming from the speakers, but it does work when plugging headphones. In Pulse Audio the speakers appear as &quot;unavailable&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZDg0l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZDg0l.png&quot; alt=&quot;speakers unavailable&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2018-05-05T13:36:45.290" Title="Speakers don't play sound, headphones do." Tags="|sound|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11069" PostTypeId="2" ParentId="11015" CreationDate="2017-03-11T17:46:13.173" Score="0" Body="&lt;p&gt;I believe &lt;strong&gt;there is a way&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make the Loki drive your primary boot device.&lt;/li&gt;&#xA;&lt;li&gt;Boot into Loki.&lt;/li&gt;&#xA;&lt;li&gt;Mount the Windows drive (for example open it in Files)&lt;/li&gt;&#xA;&lt;li&gt;Run in terminal:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo os-prober&lt;/p&gt;&#xA;&lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;PS Inspired by &lt;a href=&quot;https://askubuntu.com/questions/197868/grub-does-not-detect-windows&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8617" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-11T17:46:13.173" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11070" PostTypeId="2" ParentId="11008" CreationDate="2017-03-11T18:07:27.930" Score="1" Body="&lt;p&gt;This seems to be a bug.&#xA;I've submitted the report.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, follow &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1672065&quot; rel=&quot;nofollow noreferrer&quot;&gt;the link&lt;/a&gt; and tell that you are affected too!&lt;/p&gt;&#xA;" OwnerUserId="8617" LastActivityDate="2017-03-11T18:07:27.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11072" PostTypeId="1" CreationDate="2017-03-11T19:57:01.273" Score="0" ViewCount="349" Body="&lt;p&gt;I've created a script to restart the network manager using &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash   &#xA;&#xA;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've named the file network-restart.sh and ran &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x network-manager.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to set the file to executable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also created a desktop file name Network-Manager.desktop and saved in it ~/.local/share/applications&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Network Restart&#xA;Comment=Network Restart&#xA;Exec=/home/elementary/Documents/Scripts/network-restart.sh&#xA;Icon=/usr/share/icons/elementaryPlus/emblems/16/emblem-insync-&#xA;syncing.svg&#xA;Categories=Utility&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The icon shows up in the Slingshot menu but does not appear to be executing the network manager restart command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="84" LastEditDate="2018-05-06T18:15:33.467" LastActivityDate="2018-05-06T18:15:33.467" Title="Network Manager Restart Script Issue" Tags="|networking|app-shortcuts|script|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11073" PostTypeId="2" ParentId="11072" CreationDate="2017-03-11T23:05:46.653" Score="1" Body="&lt;p&gt;You have used &lt;code&gt;sudo&lt;/code&gt; and the script keep waiting for a password. You must use &lt;code&gt;gksu&lt;/code&gt; to open a dialog and enter your password. &lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2017-03-11T23:05:46.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11076" PostTypeId="2" ParentId="9673" CreationDate="2017-03-12T04:25:46.210" Score="1" Body="&lt;p&gt;It you're using loki, then Touchegg doesn't work. You should install libinput gestures: &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bulletmark/libinput-gestures&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2017-03-12T04:25:46.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11078" PostTypeId="2" ParentId="11038" CreationDate="2017-03-12T07:38:17.173" Score="0" Body="&lt;p&gt;First try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall libgl1-mesa-glx libgl1-mesa-dri&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2017-03-12T07:38:17.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11080" PostTypeId="2" ParentId="11038" CreationDate="2017-03-12T12:19:09.380" Score="1" Body="&lt;p&gt;Open that package again with gdebi and remove it.&lt;br&gt;&#xA;You have steam on the official repositories so just open Appcenter, search for Steam and install it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another method is to use the command line:   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Next time you want to install a .deb package, please, use this command instead of gdebi.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f /your/folder/package.deb  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will check if the package is avaliable on the official repos and install it from there instead of using a deb file. It will also solve unmet dependencies. &lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-03-12T12:19:09.380" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11082" PostTypeId="1" AcceptedAnswerId="11086" CreationDate="2017-03-12T14:29:35.160" Score="1" ViewCount="1196" Body="&lt;p&gt;Where can I find the allow to execute file as program option in the Default elementary OS loki File manager?&#xA;When I try to open a file such as jar using Java runtime a window comes up as '.......(filename) is not marked as executable.&lt;/p&gt;&#xA;" OwnerUserId="8915" LastEditorUserId="578" LastEditDate="2017-03-12T18:05:37.243" LastActivityDate="2017-03-12T18:24:53.013" Title="Allow executing files as program (java..)" Tags="|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11083" PostTypeId="1" CreationDate="2017-03-12T14:35:16.907" Score="4" ViewCount="136" Body="&lt;p&gt;I am new in open source projects development and maintenance &#xA;is there any guide to start adding features or editing ones &#xA;in elementary os ? &lt;/p&gt;&#xA;" OwnerUserId="8916" LastEditorUserId="578" LastEditDate="2017-03-12T18:28:28.513" LastActivityDate="2017-03-12T22:40:27.913" Title="Adding feature to elementary os" Tags="|development|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11084" PostTypeId="2" ParentId="11041" CreationDate="2017-03-12T16:28:39.587" Score="1" Body="&lt;p&gt;This is actually a recently closed issue in our system stylesheet. See &lt;a href=&quot;https://github.com/elementary/stylesheet/issues/69&quot; rel=&quot;nofollow noreferrer&quot;&gt;this issue report&lt;/a&gt; on GitHub. An update containing this fix should be available relatively soon.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-03-12T16:28:39.587" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11086" PostTypeId="2" ParentId="11082" CreationDate="2017-03-12T18:13:32.117" Score="0" Body="&lt;p&gt;You should set the &lt;code&gt;executable bit&lt;/code&gt; at least for the owner. You can right-click on the file, select &lt;code&gt;Properties&lt;/code&gt; from the menu and set &lt;code&gt;Execute&lt;/code&gt; on the &lt;code&gt;Permissions&lt;/code&gt; tab:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cruoO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cruoO.png&quot; alt=&quot;set executable bit for owner&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the equivalent of the terminal command: &lt;code&gt;chmod u+x test.jar&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-03-12T18:24:53.013" LastActivityDate="2017-03-12T18:24:53.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11087" PostTypeId="1" CreationDate="2017-03-12T18:41:15.330" Score="0" ViewCount="47" Body="&lt;p&gt;hi guys i think i found a bug with latest elementary os release under system settings printer if i click the i (information) button it pops up with a option to print test page and a check box saying set as default printer. i checked to use as my default printer but when i tried to uncheck as default printer it would not let me the box wont let me unclick can someone else try this and see if they have the same issue. thanks &lt;a href=&quot;https://i.stack.imgur.com/4eTlq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4eTlq.jpg&quot; alt=&quot;default printer wont uncheck&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2887" LastActivityDate="2018-04-12T14:35:28.697" Title="error turning off default printer please help" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11088" PostTypeId="2" ParentId="11053" CreationDate="2017-03-12T19:25:36.103" Score="0" Body="&lt;p&gt;In case anyone out there needs this, devilspie2 does the job.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;if (get_application_name()==&quot;Firefox&quot;) then&#xA;    set_window_workspace(8);&#xA;end&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the above snippet as &lt;code&gt;~/.config/devilspie2/Firefox.lua&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8894" LastActivityDate="2017-03-12T19:25:36.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11091" PostTypeId="2" ParentId="11083" CreationDate="2017-03-12T22:40:27.913" Score="3" Body="&lt;p&gt;I would start here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/getting-started&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find the elementary source on Launchpad and GitHub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you might look into joining the elementarycommunity on Slack.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-12T22:40:27.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11093" PostTypeId="1" CreationDate="2017-03-13T01:28:28.673" Score="0" ViewCount="35" Body="&lt;p&gt;My Acer 1810T Notebook will display the logon background image all the time and not the image that is currently showing on the screen when screen is viewed thru the Acer's VGA output port.  Trying to output to a projector with a VGA input.&lt;/p&gt;&#xA;" OwnerUserId="7335" LastActivityDate="2017-08-10T18:30:55.627" Title="My Notebook VGA output port sends Logon Background Image, but not what is showing on scrn" Tags="|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11094" PostTypeId="1" CreationDate="2017-03-13T06:44:20.280" Score="1" ViewCount="121" Body="&lt;p&gt;I'm running eOS Loki on a Dell XPS 13 with a HiDPI/QHD screen and a external QHD monitor. The login screen is OK on the laptop but on the external monitor all the colors on the login screen are strange and I can't really see what I'm doing. No issues with the external monitor once I have logged in. Can I do something about the login screen on the external monitor?&lt;/p&gt;&#xA;" OwnerUserId="637" LastActivityDate="2017-03-13T06:44:20.280" Title="Login screen not readable" Tags="|release-loki|display|greeter|hidpi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11095" PostTypeId="2" ParentId="10048" CreationDate="2017-03-13T11:49:42.400" Score="2" Body="&lt;p&gt;For Google you need to authorize &quot;Less secure apps&quot; here &lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.google.com/settings/security/lesssecureapps&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you turn that on you should be able to add your Google calendar.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-13T11:49:42.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11096" PostTypeId="1" CreationDate="2017-03-13T11:56:03.867" Score="1" ViewCount="505" Body="&lt;p&gt;I'm using elementary OS Loki 0.4. &#xA;It uses the 4.4.0-66-generic kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I very recently started kernel module programming and am unable to run my Makefile because apparently the complete kernel is not installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The tutorial suggests installing a new kernel from the tarball.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The latest 4.4 kernel available is linux-4.4.53.&#xA;If I install it from the tarball, I know the kernel will be upgraded but will all the drivers continue working just as they do now?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a bit reluctant because while using elementary OS Freya 0.3, in a similar fashion I had upgraded my kernel to current latest stable version 4.10.2 and had lost all my USB, Ethernet and WiFi drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just want to make sure that the same won't happen this time.&lt;/p&gt;&#xA;" OwnerUserId="8925" LastActivityDate="2017-03-13T13:14:07.097" Title="Upgrade kernel to linux-4.4.53" Tags="|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11097" PostTypeId="2" ParentId="11096" CreationDate="2017-03-13T13:14:07.097" Score="2" Body="&lt;p&gt;You might want to install the kernel source package from elementary OS, otherwise there is always a risk of a driver problem.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get build-dep linux-image-generic&#xA;apt-get source linux-image-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can use another version of the linux kernel, of course.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-13T13:14:07.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11098" PostTypeId="1" AcceptedAnswerId="11100" CreationDate="2017-03-13T15:02:22.320" Score="0" ViewCount="1689" Body="&lt;p&gt;i have gparted install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mine file system is 60 gb &#xA;and other drive is around 15gb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to add around 40gb to other drive&lt;/p&gt;&#xA;&#xA;&lt;p&gt;where mine file system will be 20gb and&#xA;other drive to be 55gb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I achieve that&lt;/p&gt;&#xA;" OwnerDisplayName="user7862" LastEditorUserId="578" LastEditDate="2017-04-01T07:02:31.793" LastActivityDate="2017-04-01T07:02:31.793" Title="How to resize the root file system of my installation?" Tags="|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11100" PostTypeId="2" ParentId="11098" CreationDate="2017-03-13T16:37:37.313" Score="0" Body="&lt;p&gt;it sounds like you are trying to do this while the system is running ... I think what you need to do is get another like distro to boot from that has gparted on it (or another partition tool that you can use) ... THEN run gparted on your disk (be careful) ... resize the partitions to your liking ... do NOT delete partitions or you will lose your data ... you want to RESIZE each partition ... so for your example, the 60 GB partition you would shrink to 20 GB then expand the other partition to 55 GB ... This is assuming that you are using less than 20 GB on the first&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-03-13T16:37:37.313" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11101" PostTypeId="2" ParentId="11093" CreationDate="2017-03-13T16:39:43.967" Score="1" Body="&lt;p&gt;set the displays to MIRROR in the settings&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-03-13T16:39:43.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11102" PostTypeId="2" ParentId="11072" CreationDate="2017-03-13T17:36:02.480" Score="1" Body="&lt;p&gt;well there is also another way you could do this ... but I am not sure that it is &quot;proper&quot; ... need to think about that &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;create your bash script&lt;/li&gt;&#xA;&lt;li&gt;make it executable by ANYONE&lt;/li&gt;&#xA;&lt;li&gt;sudo chown root:root {you script name}&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;at this point ... you should be able to run your script without a password prompt&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-03-13T17:36:02.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11104" PostTypeId="1" CreationDate="2017-03-13T19:57:27.810" Score="2" ViewCount="1143" Body="&lt;p&gt;Just newly installed Elemntary OS Loki, I see wifi settings, but no any access points visible. When I go to windows 10, all wifi networks are in the list.&#xA;My wifi adapter is Realtek RTL8723BE 802.11 bgn, on my HP machine.&#xA;Somehow it seems that on Elementary OS wifi signal is weaker, than on windows 10. What might be a problem?&lt;/p&gt;&#xA;" OwnerUserId="8932" LastEditorUserId="565" LastEditDate="2017-03-13T20:38:51.053" LastActivityDate="2020-05-16T20:45:55.430" Title="No wifi access points with rtl8723be" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11105" PostTypeId="1" CreationDate="2017-03-13T21:39:33.417" Score="1" ViewCount="1284" Body="&lt;p&gt;Firstly I don't know so much about PCs and OSs. I have HP Envy with windows 10, but I want to replace it with  elementary OS. I followed their instructions on the website, I selected Install elementary and it said it will take a long time. Is it normal to exceed 10 hrs and still be installing?!&lt;/p&gt;&#xA;" OwnerUserId="8934" LastEditorUserId="26" LastEditDate="2017-04-01T17:46:29.383" LastActivityDate="2020-09-07T14:04:41.880" Title="How long should itl take to install elementary OS?" Tags="|system-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11106" PostTypeId="1" CreationDate="2017-03-14T00:41:36.377" Score="0" ViewCount="391" Body="&lt;p&gt;I am making at school a arcade machine where the game is an accelerated reader test. I am looking for a single board computer that will support Elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My school is a Windows School, and I would like an example of linux so the students know what linux is. I think linux very powerful and I want to do this in a way so more people can meet linux. &lt;/p&gt;&#xA;" OwnerUserId="8936" LastEditorUserId="578" LastEditDate="2017-03-14T06:41:10.247" LastActivityDate="2017-07-12T08:41:16.557" Title="Will elementary OS work on the Asus tinkerboard?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11107" PostTypeId="2" ParentId="6847" CreationDate="2017-03-14T01:25:20.613" Score="4" Body="&lt;p&gt;For me installing &lt;code&gt;sni-qt&lt;/code&gt; solve this problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install sni-qt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More information:&#xA;&lt;a href=&quot;https://forums.insynchq.com/t/elementary-os-app-icon-in-status-bar-not-showing/1610/2&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.insynchq.com/t/elementary-os-app-icon-in-status-bar-not-showing/1610/2&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7047" LastEditorUserId="11608" LastEditDate="2017-07-25T15:11:41.060" LastActivityDate="2017-07-25T15:11:41.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11108" PostTypeId="2" ParentId="10992" CreationDate="2017-03-14T03:04:59.180" Score="1" Body="&lt;p&gt;Specific problem with my blacklisted Broadcom driver. Ethernet connection working now thanks to solutions found in two askubuntu posts. I have no wifi adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ethernet Network card BCM4401-B0 no longer recognised?   &lt;a href=&quot;https://askubuntu.com/questions/629981/ethernet-network-card-bcm4401-b0-no-longer-recognised/742287#742287&quot;&gt;1&lt;/a&gt;&lt;br&gt;&#xA;How to Revive Wired Internet and Setup Wireless?   &lt;a href=&quot;https://askubuntu.com/questions/294559/how-to-revive-wired-internet-and-setup-wireless/294788#294788&quot;&gt;2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;sudo modprobe b44&lt;/em&gt;&lt;/strong&gt; temporarily restored my connection. I then installed gedit to allow me to edit permanent or semi-permanent fixes into &lt;strong&gt;*/etc/modprobe.d/blacklist-bcm43.conf&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8747" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-03-14T03:04:59.180" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11110" PostTypeId="2" ParentId="11106" CreationDate="2017-03-14T06:43:09.400" Score="1" Body="&lt;p&gt;&lt;strong&gt;TL; DR Not for now.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I know, the Tinkerboard is an ARM-based computer whereas elementary OS 0.4 loki only supports amd64 and 0.3 freya i386 or amd64. However, there are plans to port it to arm as well. So a future version, maybe…&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-14T06:43:09.400" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11112" PostTypeId="1" CreationDate="2017-03-14T08:51:34.630" Score="0" ViewCount="1018" Body="&lt;p&gt;I am in Elementary Loki 0.4 64 bit Google Chrome version 57 when I play a youtube video CPU USAGE is insane about 90, the video is only 480p. when I play through audience it's just 30 percent max and it's a 720p video, so my pc freezes when playing Youtube videos. Any thoughts? &#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="8915" LastEditorUserId="12361" LastEditDate="2017-11-17T14:46:42.723" LastActivityDate="2022-09-23T23:02:20.160" Title="High cpu usage Chrome" Tags="|google-chrome|cpu|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11113" PostTypeId="1" CreationDate="2017-03-14T13:30:48.010" Score="-3" ViewCount="322" Body="&lt;p&gt;Clean install of elementary os. Ticked box during installation to download software. Apparently didn't work. I have about 12 apps installed. No gimp. Terminal commands to install repository not working. No sudo commands working. On the whole, very displeased!&lt;/p&gt;&#xA;" OwnerUserId="8919" LastActivityDate="2017-03-15T16:12:59.310" Title="Awful experience!" Tags="|release-loki|" AnswerCount="2" CommentCount="2" ClosedDate="2017-04-01T17:30:56.203" ContentLicense="CC BY-SA 3.0" />
  <row Id="11116" PostTypeId="2" ParentId="11113" CreationDate="2017-03-14T14:08:48.570" Score="10" Body="&lt;p&gt;Elementary will not install Gimp, or any other third party app, during install. Elementary has it's custom apps that are installed and everything else is left to the user to install. But it's very easy through the App Center or via the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary is also not setup to add PPAs by default for security/usability reasons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set your system up to add PPAs by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common python3-software-&#xA;properties python-software-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I hope this helps! Elementary really is a fantastic OS with a great community. You should stick around &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-15T16:12:59.310" LastActivityDate="2017-03-15T16:12:59.310" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11117" PostTypeId="1" CreationDate="2017-03-14T16:21:11.017" Score="0" ViewCount="193" Body="&lt;p&gt;I'm using Loki and when I try to move a window from a desktop to another this doesn't work. Or better It's move to the left but not to the right. I've tried to reassign the shortcuts but doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="8943" LastActivityDate="2019-05-05T07:01:31.257" Title="Some Keyboard shortcut doesn't work" Tags="|release-loki|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11118" PostTypeId="2" ParentId="6838" CreationDate="2017-03-14T22:53:13.887" Score="1" Body="&lt;p&gt;This is likely a Kernel or BIOS problem.  The first thing you should do is upgrade to the mainline build.  Google how to do that.   That is likely not to solve your problem.  You should file a bug with the kernel google that too.  However, you cannot file a bug (it is very rude and they will tell you soo), without upgrading the BIOS and running the mainline.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upgrading the BIOS is quite dangerous and you will need to take responsibility for this task and its results.  It is especially dangerous without a Windows dual boot.  You will need to do this step first, and perhaps it will fix your problem.  You will need to google your laptop model number and bios to download the upgraded BIOS.  Then you will need to google how to upgrade the BIOS with Ubuntu.  If you have Windows, just boot up with windows and double click on the file while the computer is plugged into AC Power, preferably a safe UPS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your problem still exists.  File a bug.  It is not an Elementary problem.  You can test this theory with another USB distro if you don't believe me. &lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-03-14T22:53:13.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11119" PostTypeId="2" ParentId="11113" CreationDate="2017-03-15T00:27:16.220" Score="5" Body="&lt;p&gt;First, you must update your system.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then for install any other application you can use AppCenter, like gimp or anything else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also install deb packages on your system using the gdebi installer.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gdebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to use PPAs, you can follow Pretzel Jones's recommendation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a nice day. &lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2017-03-15T00:27:16.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11120" PostTypeId="2" ParentId="11112" CreationDate="2017-03-15T00:36:48.927" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Have you tried using other WebKit-based browsers such as Epiphany(Web)? Report back if CPU usage is the same. – Axel Advento 2 hours ago&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You can also follow Axel Advento's suggestion or you can download &lt;a href=&quot;http://www.opera.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;OPERA&lt;/a&gt;. Opera is an amazing web browser.&lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2017-03-15T00:36:48.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11121" PostTypeId="2" ParentId="11105" CreationDate="2017-03-15T00:51:15.430" Score="2" Body="&lt;p&gt;Elementary OS installing takes about 6-10 minutes. This time may vary depending on the capabilities of your computer. But, the installation doesn't last 10 hours.&lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2017-03-15T00:51:15.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11122" PostTypeId="2" ParentId="11112" CreationDate="2017-03-15T08:02:48.053" Score="1" Body="&lt;p&gt;thnks for the suggestion But Chrome is the one for me, i have Win7 also on this same Pc and i played youtube videos trough it and checked the cpu usage, was about 20 maybe less, I UPGRADED my linux kernel to 4.6 and there has been some improvement so if anyone runs to this problem upgrade the Kernel.&lt;/p&gt;&#xA;" OwnerUserId="8915" LastActivityDate="2017-03-15T08:02:48.053" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11124" PostTypeId="2" ParentId="11117" CreationDate="2017-03-15T08:16:50.160" Score="1" Body="&lt;p&gt;go to System setting-&gt;keyboard-&gt;shortcuts  click on any function on the right box and choose what shortcut u want to use for that function.&lt;/p&gt;&#xA;" OwnerUserId="8915" LastActivityDate="2017-03-15T08:16:50.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11127" PostTypeId="1" CreationDate="2017-03-15T14:08:59.630" Score="0" ViewCount="330" Body="&lt;p&gt;I am on elementary os loki 0.4 can I downgrade to linux kernel 3(any 3 version) or does Loki just supports 4.&#xA;thank you.&lt;/p&gt;&#xA;" OwnerUserId="8915" LastActivityDate="2017-06-15T04:26:41.357" Title="Downgrade linux kernel on lok 0.4" Tags="|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11128" PostTypeId="2" ParentId="11104" CreationDate="2017-03-15T15:40:57.730" Score="2" Body="&lt;p&gt;This is an issue with HP using one antenna wire on a wireless chip with 2 antenna connections.  Since you see no wireless AP's we can just do the following in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First we will unload the module and reload it using the module parameter to try one option for the antenna&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be ant_sel=1&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then we can check to see if any AP's are found with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;iwlist scan | egrep -i 'ssid|quality'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then we can try the other antenna option and compare results&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be ant_sel=2&#xA;iwlist scan | egrep -i 'ssid|quality'&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the &lt;code&gt;ant_sel=1&lt;/code&gt; had better results then&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=1&quot; | sudo tee /etc/modprobe.d/rtl8723beant.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;ant_sel=2&lt;/code&gt; was the better option &#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=2&quot; | sudo tee /etc/modprobe.d/rtl8723beant.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-03-15T15:40:57.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11129" PostTypeId="2" ParentId="11127" CreationDate="2017-03-15T19:10:56.917" Score="0" Body="&lt;p&gt;Elementary OS Loki build on Ubuntu 16.04.2 LTS. Ubuntu 16.04 LTS is based on the long-term supported Linux release series 4.4 kernel. I don't think you can do it. If you can do it, you may encounter too many errors.&lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2017-03-15T19:10:56.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11130" PostTypeId="1" CreationDate="2017-03-15T19:24:30.347" Score="0" ViewCount="281" Body="&lt;p&gt;My photos in local folders aren't showing the miniatures. The option in the configurations window is already on to show the miniatures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can i do?&lt;/p&gt;&#xA;" OwnerUserId="8953" LastEditorUserId="578" LastEditDate="2017-03-16T07:10:03.590" LastActivityDate="2017-03-16T10:27:07.897" Title="Image preview does not work" Tags="|settings|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11131" PostTypeId="1" CreationDate="2017-03-15T23:08:09.587" Score="7" ViewCount="1171" Body="&lt;p&gt;loki is based on ubuntu 16.04, which has some issues with amd proprietary drivers, but according to &lt;a href=&quot;http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-GPU-PRO-Linux-Beta-Driver%E2%80%93Release-Notes.aspx&quot; rel=&quot;noreferrer&quot;&gt;http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-GPU-PRO-Linux-Beta-Driver%E2%80%93Release-Notes.aspx&lt;/a&gt;, everything should work, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, I tried to install these drivers on loki-release (following installation notes, I ensured that my user belongs to 'video' group), but it ended up with black screen. I had to uninstall drivers to make my OS work again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kernel: 4.4.0-67-generic&lt;br&gt;&#xA;Distro: loki&lt;br&gt;&#xA;GPU: r7 260x&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? Should it work ootb?&lt;/p&gt;&#xA;" OwnerUserId="8955" LastActivityDate="2019-01-02T23:03:56.980" Title="AMDGPU-PRO driver on loki" Tags="|release-loki|graphic-drivers|amd|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11132" PostTypeId="1" CreationDate="2017-03-15T23:21:16.630" Score="1" ViewCount="377" Body="&lt;p&gt;I have Loki and I use Private Internet Access for my VPN. I couldn't get PIA's client to work on Loki so I used &lt;a href=&quot;https://www.privateinternetaccess.com/pages/client-support/robolinux&quot; rel=&quot;nofollow noreferrer&quot;&gt;this method&lt;/a&gt; to install and it uses the network manager. It works great, but my DNS leaks. I tried using &lt;a href=&quot;http://www.ubuntubuzz.com/2015/09/how-to-fix-openvpn-dns-leak-in-linux.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this method&lt;/a&gt; to stop the leak, but I don't know where the .opvn file is I'm supposed to add the lines to. I tried adding it to this file &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/NetworkManager/system-connections/PIA - [some country]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But that didn't work. Any help?&lt;/p&gt;&#xA;" OwnerUserId="8500" LastActivityDate="2017-03-15T23:21:16.630" Title="How to stop leaked DNS for VPN?" Tags="|networking|vpn|openvpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11134" PostTypeId="1" AcceptedAnswerId="11137" CreationDate="2017-03-16T10:15:20.227" Score="0" ViewCount="975" Body="&lt;p&gt;I've searched on the forum but I couldn't seem to find an issue similar to mine: whenever I click un the update button (or update all) in the update tab of App Center (either for apps or system updates), the button changes for a milisecond and then comes back to normal with nothing else happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on what's going on? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jesus.&lt;/p&gt;&#xA;" OwnerUserId="8657" LastEditorUserId="8657" LastEditDate="2017-03-16T11:37:14.127" LastActivityDate="2017-03-16T11:40:00.930" Title="Unable to update apps in AppCenter" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11136" PostTypeId="2" ParentId="11130" CreationDate="2017-03-16T10:27:07.897" Score="1" Body="&lt;p&gt;Is this happening for all folders and all picture file types? Which Files version are you using?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try pressing the reload icon on the right of the pathbar&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check that you have the tumbler package installed and also the tumbler-plugins-extra package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use gnome-system-monitor or otherwise check that the tumblerd process is running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A file newly created while the view is showing may not show the thumbnail until hovered by the mouse or otherwise refreshed.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-03-16T10:27:07.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11137" PostTypeId="2" ParentId="11134" CreationDate="2017-03-16T11:39:47.167" Score="1" Body="&lt;p&gt;Try updating from terminal this time:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go back to Appcenter and check if everything is updated. Next time there's an update it should work as normal.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-03-16T11:39:47.167" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11140" PostTypeId="1" CreationDate="2017-03-16T15:25:29.487" Score="2" ViewCount="1473" Body="&lt;p&gt;themes that I want to apply on my PC don't work as they should. I put the theme folder into the folder &lt;code&gt;/home/firat/.themes/&lt;/code&gt; that I created before. Then I use Tweak Tool software to apply it. But it looks like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GClnm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GClnm.png&quot; alt=&quot;myPc&quot;&gt;&lt;/a&gt;&#xA;instead of this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3ztbh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3ztbh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried with other themes but result is still same. Is this a bug or something or am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="8945" LastActivityDate="2017-03-16T18:57:36.573" Title="GTK Themes Doesn't Work Well on Loki" Tags="|themes|gtk|" AnswerCount="2" CommentCount="0" ClosedDate="2017-10-08T17:20:58.183" ContentLicense="CC BY-SA 3.0" />
  <row Id="11141" PostTypeId="2" ParentId="11140" CreationDate="2017-03-16T18:22:06.390" Score="1" Body="&lt;p&gt;Maybe you need to put the theme folder in home/.local/share/themes.&#xA;Or maybe that theme doesn't support Pantheon DE.&#xA;And i recomend you to use &lt;a href=&quot;https://launchpad.net/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elmentary tweaks&lt;/a&gt; for manage your desktop theme and some other things in elementary os.&#xA;Sorry for my bad english. Hope this answer help you!&lt;/p&gt;&#xA;" OwnerUserId="8962" LastActivityDate="2017-03-16T18:22:06.390" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11142" PostTypeId="2" ParentId="11140" CreationDate="2017-03-16T18:57:36.573" Score="1" Body="&lt;p&gt;Not all themes are going to display well in elementary, particularly in apps that have client side decorations like those native to elementary - files, maya, epiphany, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You going through the right process to implement the theme, you just need to play around with different themes until you find one that works. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-16T18:57:36.573" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11143" PostTypeId="1" AcceptedAnswerId="11151" CreationDate="2017-03-16T20:48:55.597" Score="0" ViewCount="87" Body="&lt;p&gt;This is not a complaint nor an actual problem for me, I just want to make sure that everything is ok. I am getting a lot of updates, today for example I got 3 or 4. Is that the case for everyone else ?&lt;/p&gt;&#xA;" OwnerUserId="7537" LastActivityDate="2017-03-17T12:51:00.533" Title="Frequent updates" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11144" PostTypeId="1" AcceptedAnswerId="11235" CreationDate="2017-03-16T20:57:51.977" Score="0" ViewCount="639" Body="&lt;p&gt;I've been trying to change the background image of pantheon-greeter. It should change on the depending user. After browsing the &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/pantheon-greeter/trunk/view/head:/src/PantheonGreeter.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;code base of pantheon greeter&lt;/a&gt; if found that they get the background image from the method &lt;code&gt;LightDM.User.get_background ()&lt;/code&gt;. Is that the right way? If it is so how can I change the user specific background with Vala?&lt;/p&gt;&#xA;" OwnerUserId="8343" LastActivityDate="2017-03-24T11:27:00.537" Title="Change Elementary OS Lock Screen Background With Vala and User Specific" Tags="|greeter|vala|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11145" PostTypeId="1" AcceptedAnswerId="11150" CreationDate="2017-03-17T00:21:39.880" Score="1" ViewCount="1669" Body="&lt;p&gt;Recently, installed Loky in dual boot mode with Win10 in my laptop. The installtion seemed to run ok. When the install program requested to restart, I did it, but the grub bootloader didn't show up, and the machine started directly to Windows. Will appreciate any suggestion that will  help me troubleshoot this problem. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2017-03-17T12:43:44.833" Title="Grub doesn't show at start up" Tags="|release-loki|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11146" PostTypeId="2" ParentId="11143" CreationDate="2017-03-17T09:28:21.423" Score="2" Body="&lt;p&gt;This is not an answer to your question, just an affirmation that today I also got 4 updates. I guess that this was normal.&lt;/p&gt;&#xA;" OwnerUserId="3914" LastActivityDate="2017-03-17T09:28:21.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11147" PostTypeId="1" CreationDate="2017-03-17T09:57:51.820" Score="0" ViewCount="797" Body="&lt;p&gt;I am almost done using elementary OS due to all of the little issues setting it up. I have used between 40 and 50 different Linux distros in the last couple of years but elementary OS seems to be the single most difficult distro that I have used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My current issue is screen tearing. It is not a new issue, this issue has been present since the minute that I installed elementary OS, but it is the newest issue that I tackling. The screen tearing in elementary OS is the worse that I have experienced in any Linux distro, and I do not know how to fix it. My system is very basic;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel i5 4690 Haswell CPU&#xA;Asus Z-170A motherboard &#xA;Crucial SSD that elementary uses all by itself&#xA;Evga G2 550 power supply&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anybody can help me to completely eliminate this terrible screen tearing that I experience while scrolling through web pages on Firefox, I would appreciate it. Unfortunately I can not use Epiphany web browser because it was not compatible with my hardware and refused to work at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you all. From reading this other post &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1734/how-do-i-install-the-latest-intel-linux-graphics?rq=1&quot;&gt;How do I install the latest Intel Linux Graphics?&lt;/a&gt; I see that I am not alone in this situation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rocky Bennett&lt;/p&gt;&#xA;" OwnerUserId="3914" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-09-10T14:27:57.413" Title="Elemetary OS 0.4 Loki, How Do I Fix Screen Tearing" Tags="|graphics|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11148" PostTypeId="2" ParentId="11145" CreationDate="2017-03-17T10:05:29.200" Score="0" Body="&lt;p&gt;This is more of a comment for which I at this point still lack the reputation. Does your computer have a UEFI bootloader? If so, have you ensured that &lt;a href=&quot;http://www.rodsbooks.com/efi-bootloaders/secureboot.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Secure Boot&lt;/a&gt; is off? (An appropriate switch can often be found in the BIOS settings menu.) Also concerning UEFI and in the case that you did in fact disable Secure Boot: Once again boot into the BIOS menu and verify the priority of your boot options: It might be that the Windows Bootloader is still taking precedence over Grub. In that case adjust things appropriately (which once again can be done in most modern BIOS settings).&lt;/p&gt;&#xA;" OwnerUserId="6395" LastActivityDate="2017-03-17T10:05:29.200" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11149" PostTypeId="2" ParentId="11147" CreationDate="2017-03-17T10:18:02.260" Score="2" Body="&lt;p&gt;Although the cause might of course be different, your description matches an issue I have resolved on my Asus Zenbook UX310UA-FC186R by installing a more up-to-date kernel from &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Instructions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Select the folder corresponding to the kernel version you want to use (in my case 4.10.2 is working fine).&lt;/li&gt;&#xA;&lt;li&gt;From the amd64 build download (* is the version number placeholder):&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;linux-headers-*_all.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;linux-headers-*-generic_*_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;linux-image-*-generic_*_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install all three packages and reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note that in case the new kernel causes difficulties, you can still use Grub to reboot into the original one.&lt;/p&gt;&#xA;" OwnerUserId="6395" LastActivityDate="2017-03-17T10:18:02.260" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11150" PostTypeId="2" ParentId="11145" CreationDate="2017-03-17T11:59:11.480" Score="1" Body="&lt;p&gt;This is a possible duplicate : &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2894/grub-not-showing-after-installing-elementary-os-alongside-windows-10&quot;&gt;GRUB not showing after installing Elementary OS alongside Windows 10&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Windows, go to the menu and search for Command Prompt, right click on it to run it as administrator&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy paste the command below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-03-17T12:43:44.833" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11151" PostTypeId="2" ParentId="11143" CreationDate="2017-03-17T12:51:00.533" Score="1" Body="&lt;p&gt;They team is working hard in Denver on the App Center sprint. The updates are likely part of that. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-17T12:51:00.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11152" PostTypeId="2" ParentId="11147" CreationDate="2017-03-17T14:14:30.030" Score="0" Body="&lt;p&gt;OK, I was just looking at the link that you provided, thank you. I am reluctant to update my Kernel because my CPU is almost 3 years old and the installed Kernel that I am using is only a few months old. According to the release notes for elementary OS 0.4 Loki, the Kernel has been updated for support up to the 6th generation Skylake processor, and I am only running the 4th generation Haswell. I have recently used much older distros that used much older Kernels, but it was quite easy to update the graphics driver to support the Intel core architecture, but I have not figured out how to update the driver in elementary OS. Like I said in my first post, elementary OS is actually the most difficult distro that I have ever used, it is not intuitive at all. Thank you for the link because I did learn a lot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I had to choose the answer option because my response had ran over the limit allowed by over 200 characters. Sorry, but I still need guidance on this. &lt;/p&gt;&#xA;" OwnerUserId="3914" LastActivityDate="2017-03-17T14:14:30.030" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11153" PostTypeId="2" ParentId="10924" CreationDate="2017-03-17T15:37:18.273" Score="1" Body="&lt;p&gt;No matter the filesystem type, so long as it is mounted under /media/user/SomeDirectory, it appears to show up under &quot;Devices&quot; for me at least...&lt;/p&gt;&#xA;" OwnerUserId="8971" LastActivityDate="2017-03-17T15:37:18.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11154" PostTypeId="1" AcceptedAnswerId="11155" CreationDate="2017-03-17T18:19:29.873" Score="0" ViewCount="218" Body="&lt;p&gt;I need to have Teamviewer in  my laptop but I can't install it because of too many dependencies. I didn't have that problem with Freya in my other laptop. Any solution for this? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2017-03-17T18:24:40.853" Title="Can't install Teamviewer (version 11 or 12) because of dependencies, help" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11155" PostTypeId="2" ParentId="11154" CreationDate="2017-03-17T18:24:40.853" Score="0" Body="&lt;p&gt;Check &lt;a href=&quot;https://askubuntu.com/questions/214746/how-to-run-apt-get-install-to-install-all-dependencies&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically you'll run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to install dependencies&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-03-17T18:24:40.853" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11159" PostTypeId="1" CreationDate="2017-03-18T03:27:59.917" Score="1" ViewCount="61" Body="&lt;p&gt;Running 0.4 Loki.  If I put my MacBook to sleep it wakes a few seconds later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was advised to run the following command, but it is not helping.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo sh -c &quot;echo XHC1 &gt; /proc/acpi/wakeup&quot;&lt;/p&gt;&#xA;" OwnerUserId="8939" LastActivityDate="2017-03-18T03:27:59.917" Title="Macbook Pro - Won't stay asleep" Tags="|release-loki|macbook|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11161" PostTypeId="1" CreationDate="2017-03-18T15:16:06.340" Score="0" ViewCount="917" Body="&lt;p&gt;I tried googling, but cannot find a definitive answer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the thing - I'm allergic to cables, so I'm using bluetooth everything. So far only Ubuntu allowed me to connect MX Master mouse and K380 keyboard at once (keyboard has this authentication thing where you have to type in the password shown on screen), but I really don't like this distro. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here's the question: will I be able to use my keyboard and mouse with elementaryOS without having to spend hours in terminal installing plugins? I really love how reliable and fast Linuxes are, but lack of features like bluetooth support is a big pain. Hope that elementary will solve my issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for all the answers :)&lt;/p&gt;&#xA;" OwnerUserId="8984" LastActivityDate="2023-12-16T11:08:51.057" Title="Will Logitech K380 and MX Master work on elementary OS?" Tags="|keyboard|bluetooth|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11162" PostTypeId="2" ParentId="11161" CreationDate="2017-03-18T15:33:12.537" Score="0" Body="&lt;p&gt;Since Ubuntu is the base for Elementary OS anything that works in Ubuntu should work in it's derivatives.  If the mouse and keyboard worked in Ubuntu 16.04 it should work in Elementary Loki&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-03-18T15:33:12.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11164" PostTypeId="1" CreationDate="2017-03-18T16:47:56.677" Score="0" ViewCount="130" Body="&lt;ul&gt;&#xA;&lt;li&gt;Using fully updated Loki on a:&lt;/li&gt;&#xA;&lt;li&gt;Quad-Core Intel® Core™ i7-3537U CPU @ 2.00GHz&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;A couple days ago notifications starting showing up with missing characters. &#xA;This error happens across programs. The image is from a notification of Spotify, but the first time I notice was from a news update. Now I do not receive any complete notification. I have not installed any alien repository or new program in the last couple of days. But I do update Elementary every single day.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Sorry for the poor quality of the attached img, it's taken with my mobile, the screen shots did not include the notifications pop up)&lt;a href=&quot;https://i.stack.imgur.com/V5AGa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V5AGa.jpg&quot; alt=&quot;As you can see only a few characters show up&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this identified and can someone help me fix it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, &#xA;Nuno&lt;/p&gt;&#xA;" OwnerUserId="3103" LastActivityDate="2018-12-16T16:03:10.643" Title="Notification Pop-up with with missing characters" Tags="|release-loki|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11168" PostTypeId="1" CreationDate="2017-03-18T19:04:38.833" Score="0" ViewCount="279" Body="&lt;p&gt;When I use the command I seem to be getting these errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:46 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main amd64 Packages    &#xA;  404  Not Found    &#xA;Ign:52 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main i386 Packages         &#xA;Ign:53 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main all Packages          &#xA;Ign:54 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main Translation-en_US     &#xA;Ign:56 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main Translation-en        &#xA;Ign:57 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main amd64 DEP-11 Metadata    &#xA;Ign:58 http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial/main DEP-11 64x64 Icons&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It checks multiple times, but still no success. And the app center takes forever to check for updates. Any help guys? &lt;/p&gt;&#xA;" OwnerUserId="8991" LastEditorUserId="578" LastEditDate="2017-03-20T09:02:43.680" LastActivityDate="2017-03-20T09:34:20.740" Title="Getting errors while using the command sudo apt-get update" Tags="|apt|ppa|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11169" PostTypeId="2" ParentId="11168" CreationDate="2017-03-18T20:17:26.747" Score="1" Body="&lt;p&gt;It looks like one of the ppa .list files in the /etc/apt/sources.list.d/ directory may have a typo and instead of an &quot;http&quot; reference it has &quot;ht*p&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd check the files in that directory for the typo...&lt;/p&gt;&#xA;" OwnerUserId="8971" LastActivityDate="2017-03-18T20:17:26.747" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11170" PostTypeId="1" AcceptedAnswerId="11194" CreationDate="2017-03-18T21:28:31.960" Score="0" ViewCount="699" Body="&lt;p&gt;I've attempted to install elementary OS Loki at least ten times at this pont. Everything runs smoothly up until the end when I am told to restart the computer. If I restart and remove installation media, I am told that there is no OS installed, and if I don't I am returned to the install screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens with the BIOS in both uefi and legacy modes, with secure boot on or off.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: (I just remembered, The computer fails to recognize that an OS is present altogether although the installation program does. It also recognizes that the disk has been formatted and contains partitions made by the past attempts at install elementary OS.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="8993" LastEditorUserId="308" LastEditDate="2018-08-07T18:20:11.900" LastActivityDate="2018-08-07T18:20:11.900" Title="elementary OS 0.4 Loki Installation utility not working" Tags="|system-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="11174" PostTypeId="2" ParentId="8717" CreationDate="2017-03-19T00:03:16.770" Score="0" Body="&lt;p&gt;I had a similar issue, except mine was &quot;20160909&quot; instead of 20160921. I don't know where it came from, but I fixed it by installing the &quot;Additional Drivers&quot; app from the AppCenter (I remembered it from Linux Mint), it has a tab called &quot;Other Software&quot; where you can remove/disable PPAs with a click.&lt;/p&gt;&#xA;" OwnerUserId="8997" LastActivityDate="2017-03-19T00:03:16.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11175" PostTypeId="2" ParentId="11168" CreationDate="2017-03-19T00:18:16.073" Score="0" Body="&lt;p&gt;This PPA does not have packages for your distrbution (xenial, the version of Ubuntu elementary OS 0.4 loki is based on).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to try to install the last version available (&quot;saucy&quot;) instead of &quot;xenial&quot; but as it is a pretty old version it is not sure that it will work. Change in the file &lt;code&gt;/etc/apt/sources.list.d/t-tujikawa-ubuntu-ppa-xenial.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu xenial main &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/t-tujikawa/ppa/ubuntu saucy main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-03-20T09:34:20.740" LastActivityDate="2017-03-20T09:34:20.740" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11177" PostTypeId="1" AcceptedAnswerId="11180" CreationDate="2017-03-19T19:19:20.853" Score="0" ViewCount="624" Body="&lt;p&gt;I installed the Numix Theme Icons and Wallpapers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I no longer want them how might I remove Numix and all it's files?&lt;/p&gt;&#xA;" OwnerUserId="8714" LastActivityDate="2017-03-19T23:20:23.720" Title="Removing Theme Icons and Wallpapers" Tags="|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11178" PostTypeId="2" ParentId="11177" CreationDate="2017-03-19T20:14:41.133" Score="0" Body="&lt;p&gt;Delete the Numix folder from either ~/.themes or /usr/share/themes&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-19T20:14:41.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11179" PostTypeId="1" CreationDate="2017-03-19T22:10:33.737" Score="0" ViewCount="173" Body="&lt;p&gt;Every time I try to run the installer I get the following message:-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&quot;This kernel requires an x86-64 CPU, but only detected an i686 CPU. Unable to boot – please use a kernel appropriate for your CPU&quot;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a 32 bit version of the OS I can download?&lt;/p&gt;&#xA;" OwnerUserId="9005" LastActivityDate="2017-03-20T20:01:03.577" Title="how to install on a MacMini 1.1" Tags="|kernel|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-01T21:56:42.910" ContentLicense="CC BY-SA 3.0" />
  <row Id="11180" PostTypeId="2" ParentId="11177" CreationDate="2017-03-19T23:20:23.720" Score="1" Body="&lt;p&gt;If you installed the theme/icons from &lt;code&gt;apt&lt;/code&gt; you can remove it as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge numix*&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-03-19T23:20:23.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11181" PostTypeId="2" ParentId="11170" CreationDate="2017-03-20T01:37:24.613" Score="0" Body="&lt;p&gt;While installing set the 'drive to install bootloader' as /dev/sdA&lt;/p&gt;&#xA;&lt;p&gt;If that doesn't work, then try this method.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a bootable disk with Supergrub &lt;a href=&quot;http://www.supergrubdisk.org/category/download/supergrub2diskdownload/super-grub2-disk-stable/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; using WinISO or PowerISO or any similar software in your USB stick.&lt;/li&gt;&#xA;&lt;li&gt;Boot the Supergrub from USB. Supergrup auto-detects all the OS installed on your disks. Select the corresponding volume where elementary OS is installed.&lt;/li&gt;&#xA;&lt;li&gt;Run the following commands in your elementary OS terminal&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;&lt;p&gt;sudo grub-install /dev/sda&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="8633" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-20T01:37:24.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11183" PostTypeId="1" CreationDate="2017-03-20T09:22:23.480" Score="2" ViewCount="6581" Body="&lt;p&gt;What about Netflix application on Elementary OS? I tried it with Epiphany and Chromium and it does not work,  I'm redirected to &lt;a href=&quot;https://help.netflix.com/en/node/23742&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.netflix.com/en/node/23742&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution? Thanks&lt;/p&gt;&#xA;" OwnerUserId="9018" LastEditorUserId="792" LastEditDate="2017-03-20T17:08:46.120" LastActivityDate="2017-03-27T10:05:25.640" Title="Watching Netflix on 0.4 Loki" Tags="|epiphany|chromium|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11185" PostTypeId="2" ParentId="9330" CreationDate="2017-03-20T11:22:47.007" Score="0" Body="&lt;p&gt;Still happening randomly at boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A solution faster than rebooting is to switch to another console and restart lightdm with &lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user8124" LastActivityDate="2017-03-20T11:22:47.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11186" PostTypeId="2" ParentId="9289" CreationDate="2017-03-20T11:54:04.690" Score="1" Body="&lt;p&gt;I still cannot say what the problem was, I tried now after a few months and everything works as it should. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A big thank you goes out to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/792/ryan-debeasi&quot;&gt;Ryan DeBeasi&lt;/a&gt; !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For documentation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How to build an indicator from source?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the pre-required packages&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install libappindicator-dev&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo apt-get install libgtk-3-dev&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a new file called &quot;IndicatorExample.vala&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Paste the &lt;a href=&quot;https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Vala_Example&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Ubuntu Indicator Example&quot;&gt;Ubuntu Indicator Example&lt;/a&gt; code in it&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Compile with&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;valac --pkg appindicator-0.1 --pkg gtk+-3.0 IndicatorExample.vala&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Launch with&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;./IndicatorExample&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7110" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-03-20T11:54:04.690" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11187" PostTypeId="2" ParentId="9198" CreationDate="2017-03-20T12:16:43.907" Score="0" Body="&lt;p&gt;The change in /usr/share/themes/gtk-3.0/gt-widgets is working for me. Set it at 2 places to 14.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changes in gtkrc did not have any results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to reboot to see changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would be nice to have the possibility to change this with a gui in the setting. Working in a aeroplane or train is much easier with wider scrollbar, but not so looking cool.&lt;/p&gt;&#xA;" OwnerUserId="9026" LastActivityDate="2017-03-20T12:16:43.907" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11188" PostTypeId="2" ParentId="11183" CreationDate="2017-03-20T17:06:51.170" Score="5" Body="&lt;p&gt;Netflix's Linux support is limited to Chrome and Firefox. To watch Netflix, you could:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.google.com/chrome/browser/desktop/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Install Chrome&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install Firefox from the AppCenter&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://techblog.netflix.com/2017/03/update-on-html5-video-for-netflix.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Netflix now supports Firefox on Linux&lt;/a&gt;!&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/172364/netflix-works-on-chrome-but-not-chromium#172366&quot;&gt;Install the chromium-widevine plugin&lt;/a&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Chromium-widevine may not work properly on elementary; see &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1371274&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-03-21T19:26:59.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11189" PostTypeId="2" ParentId="11161" CreationDate="2017-03-20T17:32:23.907" Score="0" Body="&lt;p&gt;I have that mouse and it works just fine. The secondary buttons are mapped to back and forward and that works system wide. Can't say anything for the keyboard though.&lt;/p&gt;&#xA;" OwnerUserId="9027" LastActivityDate="2017-03-20T17:32:23.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11191" PostTypeId="2" ParentId="5597" CreationDate="2017-03-20T17:41:24.983" Score="2" Body="&lt;p&gt;Try setting it up with Service:Other (I believe it is), then configure the mail settings manually. I had to do this to get Gmail working on it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under Incoming::&#xA;Make sure IMAP is selected.&#xA;Enter “imap-mail.outlook.de” for Server hostname.&#xA;Select “993” as the Port.&#xA;Make sure SSL/TLS is selected for SSL.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under Outgoing::&#xA;Enter “smtp-mail.outlook.de” for Server hostname.&#xA;Select “587” as the Port.&#xA;Make sure STARTTLS is selected for SSL.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-20T17:41:24.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11192" PostTypeId="1" CreationDate="2017-03-20T17:41:34.177" Score="0" ViewCount="2122" Body="&lt;p&gt;I installed elementary-tweaks and wanted to install the transparent theme using this commands: &lt;code&gt;sudo add-apt-repository ppa:yunnxx/elementary&lt;/code&gt; , &lt;code&gt;sudo apt-get update&lt;/code&gt; , &lt;code&gt;sudo apt-get install elementary-transparent-theme&lt;/code&gt; and i get this error message: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package elementary-transparent-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I use Loki 0.4.&lt;/p&gt;&#xA;" OwnerUserId="9030" LastEditorUserId="84" LastEditDate="2018-05-06T18:16:49.473" LastActivityDate="2018-05-06T18:16:49.473" Title="I can't install the elementary-transparent-theme" Tags="|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11193" PostTypeId="2" ParentId="11179" CreationDate="2017-03-20T20:01:03.577" Score="0" Body="&lt;p&gt;My recollection is that from Loki (0.4) on there is only 64 bit ... so you may need to find an older version for 32 bit ... remember not supported&lt;/p&gt;&#xA;&#xA;&lt;p&gt;see&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-03-20T20:01:03.577" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11194" PostTypeId="2" ParentId="11170" CreationDate="2017-03-20T21:18:05.223" Score="0" Body="&lt;p&gt;I learned that this issue actually was not because of an issue with Grub, but rather an issue with the disk burner I used (Iso to USB) It, for whatever reason, fails to make proper disk images. YOU MUST USE RUFUS FOR ELEMENTARY OS TO PROPERLY INSTALL. &lt;/p&gt;&#xA;" OwnerUserId="8993" LastEditorUserId="8993" LastEditDate="2017-03-21T17:23:01.157" LastActivityDate="2017-03-21T17:23:01.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11196" PostTypeId="2" ParentId="9731" CreationDate="2017-03-21T00:45:12.010" Score="2" Body="&lt;p&gt;I found a solution for this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install PIA as seen on the &lt;a href=&quot;https://www.privateinternetaccess.com/installer/download_installer_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;site&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then edit pia_manager.desktop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano ~/.local/share/applications/pia_manager.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And alter the line &lt;code&gt;Exec=/home/bats/.pia_manager/pia_manager/run.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it becomes like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity /home/bats/.pia_manager/pia_manager/run.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The icon will then appear on the panel.&lt;/p&gt;&#xA;" OwnerUserId="9039" LastEditorUserId="578" LastEditDate="2017-03-21T13:20:55.013" LastActivityDate="2017-03-21T13:20:55.013" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11197" PostTypeId="2" ParentId="9105" CreationDate="2017-03-21T00:47:39.000" Score="1" Body="&lt;p&gt;Install PIA as seen on the &lt;a href=&quot;https://www.privateinternetaccess.com/installer/download_installer_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;site&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then edit pia_manager.desktop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano ~/.local/share/applications/pia_manager.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And alter the line &lt;code&gt;Exec=/home/bats/.pia_manager/pia_manager/run.sh&lt;/code&gt; so it becomes like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity /home/bats/.pia_manager/pia_manager/run.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The icon will then appear on the panel.&lt;/p&gt;&#xA;" OwnerUserId="9039" LastEditorUserId="578" LastEditDate="2017-03-21T13:22:06.487" LastActivityDate="2017-03-21T13:22:06.487" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11198" PostTypeId="1" CreationDate="2017-03-21T15:00:04.587" Score="0" ViewCount="83" Body="&lt;p&gt;I changed something in ~/.bashrc and after I sourced it,&#xA;my Terminal hasn't started anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It just starts without any Text and crashes after a few seconds, I tried to restore the old .bashrc-file, but it didn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There isn't a color scheme anymore either, I have absolutly no clue.&lt;/p&gt;&#xA;" OwnerUserId="9049" LastActivityDate="2023-12-30T11:06:40.980" Title="Terminal Crashes on start" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11199" PostTypeId="2" ParentId="11198" CreationDate="2017-03-21T15:13:50.090" Score="0" Body="&lt;p&gt;I would suggest removing and reinstalling the Pantheon Terminal through the App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you run into any other issue that might require access to a working terminal you can install the Gnome Terminal through the App Center and use that to fix whatever might need fixing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Refer to these &lt;a href=&quot;https://adam.merrifield.ca/2015/11/23/4-steps-to-replace-the-terminal-in-elementary-os-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructions&lt;/a&gt; if you want to set Gnome Terminal as your permanent replacement.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-21T15:35:01.540" LastActivityDate="2017-03-21T15:35:01.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11200" PostTypeId="1" CreationDate="2017-03-21T15:47:47.923" Score="1" ViewCount="290" Body="&lt;p&gt;I've installed ElementaryOS on OSX, at first a black scree was shown, I followed the #9 and #10 tutorials in the answer in: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8177/black-screen-when-installing-os&quot;&gt;Black screen when installing OS&lt;/a&gt; ,in the final steps I was able to boot on OSX and install rEFInd again, after that I modified the following files /etc/default/grub and /etc/grub.d/10_linux,everything worked fine, rEFInd was showing and Elementary OS opened correctly, everything was fine except for the fact that when clickin on MacOS a white image was hanging and even after 20 mins. on waiting OSX didn't start, further more even when the #10 tutorial said there should appear an AMD allowing version on rEFInd it didn't &lt;a href=&quot;https://i.stack.imgur.com/iqXDG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iqXDG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BTQTE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BTQTE.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# If you change this file, run 'update-grub' afterwards to update&#xA;# /boot/grub/grub.cfg.&#xA;# For full documentation of the options in this file, see:&#xA;#   info -f grub -n 'Simple configuration'&#xA;&#xA;GRUB_DEFAULT=0&#xA;GRUB_HIDDEN_TIMEOUT=0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;GRUB_TIMEOUT=5&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&#xA;# Uncomment to enable BadRAM filtering, modify to suit your needs&#xA;# This works with Linux (no patch required) and with any kernel that obtains&#xA;# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)&#xA;#GRUB_BADRAM=&quot;0x01234567,0xfefefefe,0x89abcdef,0xefefefef&quot;&#xA;&#xA;# Uncomment to disable graphical terminal (grub-pc only)&#xA;#GRUB_TERMINAL=console&#xA;&#xA;# The resolution used on graphical terminal&#xA;# note that you can use only modes which your graphic card supports via VBE&#xA;# you can see them in real GRUB with the command `vbeinfo'&#xA;#GRUB_GFXMODE=640x480&#xA;&#xA;# Uncomment if you don't want GRUB to pass &quot;root=UUID=xxx&quot; parameter to Linux&#xA;#GRUB_DISABLE_LINUX_UUID=true&#xA;&#xA;# Uncomment to disable generation of recovery mode menu entries&#xA;#GRUB_DISABLE_RECOVERY=&quot;true&quot;&#xA;&#xA;# Uncomment to get a beep at grub start&#xA;#GRUB_INIT_TUNE=&quot;480 440 1&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The /etc/grub.d/10_linux&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/sh&#xA;set -e&#xA;&#xA;# grub-mkconfig helper script.&#xA;# Copyright (C) 2006,2007,2008,2009,2010  Free Software Foundation, Inc.&#xA;#&#xA;# GRUB is free software: you can redistribute it and/or modify&#xA;# it under the terms of the GNU General Public License as published by&#xA;# the Free Software Foundation, either version 3 of the License, or&#xA;# (at your option) any later version.&#xA;#&#xA;# GRUB is distributed in the hope that it will be useful,&#xA;# but WITHOUT ANY WARRANTY; without even the implied warranty of&#xA;# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the&#xA;# GNU General Public License for more details.&#xA;#&#xA;# You should have received a copy of the GNU General Public License&#xA;# along with GRUB.  If not, see &amp;lt;http://www.gnu.org/licenses/&amp;gt;.&#xA;&#xA;prefix=&quot;/usr&quot;&#xA;exec_prefix=&quot;/usr&quot;&#xA;datarootdir=&quot;/usr/share&quot;&#xA;ubuntu_recovery=&quot;1&quot;&#xA;quiet_boot=&quot;1&quot;&#xA;quick_boot=&quot;1&quot;&#xA;gfxpayload_dynamic=&quot;1&quot;&#xA;vt_handoff=&quot;1&quot;&#xA;&#xA;. &quot;${datarootdir}/grub/grub-mkconfig_lib&quot;&#xA;&#xA;export TEXTDOMAIN=grub&#xA;export TEXTDOMAINDIR=&quot;${datarootdir}/locale&quot;&#xA;&#xA;CLASS=&quot;--class gnu-linux --class gnu --class os&quot;&#xA;SUPPORTED_INITS=&quot;sysvinit:/lib/sysvinit/init systemd:/lib/systemd/systemd upstart:/sbin/upstart&quot;&#xA;&#xA;if [ &quot;x${GRUB_DISTRIBUTOR}&quot; = &quot;x&quot; ] ; then&#xA;  OS=GNU/Linux&#xA;else&#xA;  case ${GRUB_DISTRIBUTOR} in&#xA;    Ubuntu|Kubuntu)&#xA;      OS=&quot;${GRUB_DISTRIBUTOR}&quot;&#xA;      ;;&#xA;    *)&#xA;      OS=&quot;${GRUB_DISTRIBUTOR}&quot;&#xA;      ;;&#xA;  esac&#xA;  CLASS=&quot;--class $(echo ${GRUB_DISTRIBUTOR} | tr 'A-Z' 'a-z' | cut -d' ' -f1|LC_ALL=C sed 's,[^[:alnum:]_],_,g') ${CLASS}&quot;&#xA;fi&#xA;&#xA;# loop-AES arranges things so that /dev/loop/X can be our root device, but&#xA;# the initrds that Linux uses don't like that.&#xA;case ${GRUB_DEVICE} in&#xA;  /dev/loop/*|/dev/loop[0-9])&#xA;    GRUB_DEVICE=`losetup ${GRUB_DEVICE} | sed -e &quot;s/^[^(]*(\([^)]\+\)).*/\1/&quot;`&#xA;    # We can't cope with devices loop-mounted from files here.&#xA;    case ${GRUB_DEVICE} in&#xA;      /dev/*) ;;&#xA;      *) exit 0 ;;&#xA;    esac&#xA;  ;;&#xA;esac&#xA;&#xA;if [ &quot;x${GRUB_DEVICE_UUID}&quot; = &quot;x&quot; ] || [ &quot;x${GRUB_DISABLE_LINUX_UUID}&quot; = &quot;xtrue&quot; ] \&#xA;    || ! test -e &quot;/dev/disk/by-uuid/${GRUB_DEVICE_UUID}&quot; \&#xA;    || uses_abstraction &quot;${GRUB_DEVICE}&quot; lvm; then&#xA;  LINUX_ROOT_DEVICE=${GRUB_DEVICE}&#xA;else&#xA;  LINUX_ROOT_DEVICE=UUID=${GRUB_DEVICE_UUID}&#xA;fi&#xA;&#xA;case x&quot;$GRUB_FS&quot; in&#xA;    xbtrfs)&#xA;    rootsubvol=&quot;`make_system_path_relative_to_its_root /`&quot;&#xA;    rootsubvol=&quot;${rootsubvol#/}&quot;&#xA;    if [ &quot;x${rootsubvol}&quot; != x ]; then&#xA;        GRUB_CMDLINE_LINUX=&quot;rootflags=subvol=${rootsubvol} ${GRUB_CMDLINE_LINUX}&quot;&#xA;    fi;;&#xA;    xzfs)&#xA;    rpool=`${grub_probe} --device ${GRUB_DEVICE} --target=fs_label 2&amp;gt;/dev/null || true`&#xA;    bootfs=&quot;`make_system_path_relative_to_its_root / | sed -e &quot;s,@$,,&quot;`&quot;&#xA;    LINUX_ROOT_DEVICE=&quot;ZFS=${rpool}${bootfs}&quot;&#xA;    ;;&#xA;esac&#xA;&#xA;title_correction_code=&#xA;&#xA;if [ -x /lib/recovery-mode/recovery-menu ]; then&#xA;    GRUB_CMDLINE_LINUX_RECOVERY=recovery&#xA;else&#xA;    GRUB_CMDLINE_LINUX_RECOVERY=single&#xA;fi&#xA;if [ &quot;$ubuntu_recovery&quot; = 1 ]; then&#xA;    GRUB_CMDLINE_LINUX_RECOVERY=&quot;$GRUB_CMDLINE_LINUX_RECOVERY nomodeset&quot;&#xA;fi&#xA;&#xA;if [ &quot;$vt_handoff&quot; = 1 ]; then&#xA;  for word in $GRUB_CMDLINE_LINUX_DEFAULT; do&#xA;    if [ &quot;$word&quot; = splash ]; then&#xA;      GRUB_CMDLINE_LINUX_DEFAULT=&quot;$GRUB_CMDLINE_LINUX_DEFAULT \$vt_handoff&quot;&#xA;    fi&#xA;  done&#xA;fi&#xA;&#xA;linux_entry ()&#xA;{&#xA;  os=&quot;$1&quot;&#xA;  version=&quot;$2&quot;&#xA;  type=&quot;$3&quot;&#xA;  args=&quot;$4&quot;&#xA;&#xA;  if [ -z &quot;$boot_device_id&quot; ]; then&#xA;      boot_device_id=&quot;$(grub_get_device_id &quot;${GRUB_DEVICE}&quot;)&quot;&#xA;  fi&#xA;  if [ x$type != xsimple ] ; then&#xA;      case $type in&#xA;      recovery)&#xA;          title=&quot;$(gettext_printf &quot;%s, with Linux %s (%s)&quot; &quot;${os}&quot; &quot;${version}&quot; &quot;$(gettext &quot;${GRUB_RECOVERY_TITLE}&quot;)&quot;)&quot; ;;&#xA;      init-*)&#xA;          title=&quot;$(gettext_printf &quot;%s, with Linux %s (%s)&quot; &quot;${os}&quot; &quot;${version}&quot; &quot;${type#init-}&quot;)&quot; ;;&#xA;      *)&#xA;          title=&quot;$(gettext_printf &quot;%s, with Linux %s&quot; &quot;${os}&quot; &quot;${version}&quot;)&quot; ;;&#xA;      esac&#xA;      if [ x&quot;$title&quot; = x&quot;$GRUB_ACTUAL_DEFAULT&quot; ] || [ x&quot;Previous Linux versions&amp;gt;$title&quot; = x&quot;$GRUB_ACTUAL_DEFAULT&quot; ]; then&#xA;      replacement_title=&quot;$(echo &quot;Advanced options for ${OS}&quot; | sed 's,&amp;gt;,&amp;gt;&amp;gt;,g')&amp;gt;$(echo &quot;$title&quot; | sed 's,&amp;gt;,&amp;gt;&amp;gt;,g')&quot;&#xA;      quoted=&quot;$(echo &quot;$GRUB_ACTUAL_DEFAULT&quot; | grub_quote)&quot;&#xA;      title_correction_code=&quot;${title_correction_code}if [ \&quot;x\$default\&quot; = '$quoted' ]; then default='$(echo &quot;$replacement_title&quot; | grub_quote)'; fi;&quot;&#xA;      grub_warn &quot;$(gettext_printf &quot;Please don't use old title \`%s' for GRUB_DEFAULT, use \`%s' (for versions before 2.00) or \`%s' (for 2.00 or later)&quot; &quot;$GRUB_ACTUAL_DEFAULT&quot; &quot;$replacement_title&quot; &quot;gnulinux-advanced-$boot_device_id&amp;gt;gnulinux-$version-$type-$boot_device_id&quot;)&quot;&#xA;      fi&#xA;      echo &quot;menuentry '$(echo &quot;$title&quot; | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  else&#xA;      echo &quot;menuentry '$(echo &quot;$os&quot; | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  fi      &#xA;  if [ &quot;$quick_boot&quot; = 1 ]; then&#xA;      echo &quot;    recordfail&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  fi&#xA;  if [ x$type != xrecovery ] ; then&#xA;      save_default_entry | grub_add_tab&#xA;  fi&#xA;&#xA;  # Use ELILO's generic &quot;efifb&quot; when it's known to be available.&#xA;  # FIXME: We need an interface to select vesafb in case efifb can't be used.&#xA;  if [ &quot;x$GRUB_GFXPAYLOAD_LINUX&quot; = x ]; then&#xA;      echo &quot;    load_video&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  else&#xA;      if [ &quot;x$GRUB_GFXPAYLOAD_LINUX&quot; != xtext ]; then&#xA;      echo &quot;    load_video&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;      fi&#xA;  fi&#xA;  if ([ &quot;$ubuntu_recovery&quot; = 0 ] || [ x$type != xrecovery ]) &amp;amp;&amp;amp; \&#xA;     ([ &quot;x$GRUB_GFXPAYLOAD_LINUX&quot; != x ] || [ &quot;$gfxpayload_dynamic&quot; = 1 ]); then&#xA;      echo &quot;    gfxmode \$linux_gfx_mode&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  fi&#xA;  echo &quot;    outb 0x728 1&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  echo &quot;    outb 0x710 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  echo &quot;    outb 0x740 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  echo &quot;    outb 0x750 0&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  echo &quot;    insmod gzio&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  echo &quot;    if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;&#xA;&#xA;  if [ x$dirname = x/ ]; then&#xA;    if [ -z &quot;${prepare_root_cache}&quot; ]; then&#xA;      prepare_root_cache=&quot;$(prepare_grub_to_access_device ${GRUB_DEVICE} | grub_add_tab)&quot;&#xA;    fi&#xA;    printf '%s\n' &quot;${prepare_root_cache}&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  else&#xA;    if [ -z &quot;${prepare_boot_cache}&quot; ]; then&#xA;      prepare_boot_cache=&quot;$(prepare_grub_to_access_device ${GRUB_DEVICE_BOOT} | grub_add_tab)&quot;&#xA;    fi&#xA;    printf '%s\n' &quot;${prepare_boot_cache}&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;  fi&#xA;  if [ x&quot;$quiet_boot&quot; = x0 ] || [ x&quot;$type&quot; != xsimple ]; then&#xA;    message=&quot;$(gettext_printf &quot;Loading Linux %s ...&quot; ${version})&quot;&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;    echo    '$(echo &quot;$message&quot; | grub_quote)'&#xA;EOF&#xA;  fi&#xA;  if test -d /sys/firmware/efi &amp;amp;&amp;amp; test -e &quot;${linux}.efi.signed&quot;; then&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;    linux   ${rel_dirname}/${basename}.efi.signed root=${linux_root_device_thisversion} ro ${args}&#xA;EOF&#xA;  else&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;    linux   ${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro ${args}&#xA;EOF&#xA;  fi&#xA;  if test -n &quot;${initrd}&quot; ; then&#xA;    # TRANSLATORS: ramdisk isn't identifier. Should be translated.&#xA;    if [ x&quot;$quiet_boot&quot; = x0 ] || [ x&quot;$type&quot; != xsimple ]; then&#xA;      message=&quot;$(gettext_printf &quot;Loading initial ramdisk ...&quot;)&quot;&#xA;      sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;    echo    '$(echo &quot;$message&quot; | grub_quote)'&#xA;EOF&#xA;    fi&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;    initrd  ${rel_dirname}/${initrd}&#xA;EOF&#xA;  fi&#xA;  sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;}&#xA;EOF&#xA;}&#xA;&#xA;machine=`uname -m`&#xA;case &quot;x$machine&quot; in&#xA;    xi?86 | xx86_64)&#xA;    list=`for i in /boot/vmlinuz-* /vmlinuz-* /boot/kernel-* ; do&#xA;                  if grub_file_is_not_garbage &quot;$i&quot; ; then echo -n &quot;$i &quot; ; fi&#xA;              done` ;;&#xA;    *) &#xA;    list=`for i in /boot/vmlinuz-* /boot/vmlinux-* /vmlinuz-* /vmlinux-* /boot/kernel-* ; do&#xA;                  if grub_file_is_not_garbage &quot;$i&quot; ; then echo -n &quot;$i &quot; ; fi&#xA;         done` ;;&#xA;esac&#xA;&#xA;case &quot;$machine&quot; in&#xA;    i?86) GENKERNEL_ARCH=&quot;x86&quot; ;;&#xA;    mips|mips64) GENKERNEL_ARCH=&quot;mips&quot; ;;&#xA;    mipsel|mips64el) GENKERNEL_ARCH=&quot;mipsel&quot; ;;&#xA;    arm*) GENKERNEL_ARCH=&quot;arm&quot; ;;&#xA;    *) GENKERNEL_ARCH=&quot;$machine&quot; ;;&#xA;esac&#xA;&#xA;prepare_boot_cache=&#xA;prepare_root_cache=&#xA;boot_device_id=&#xA;title_correction_code=&#xA;&#xA;cat &amp;lt;&amp;lt; 'EOF'&#xA;function gfxmode {&#xA;    set gfxpayload=&quot;${1}&quot;&#xA;EOF&#xA;if [ &quot;$vt_handoff&quot; = 1 ]; then&#xA;  cat &amp;lt;&amp;lt; 'EOF'&#xA;    if [ &quot;${1}&quot; = &quot;keep&quot; ]; then&#xA;        set vt_handoff=vt.handoff=7&#xA;    else&#xA;        set vt_handoff=&#xA;    fi&#xA;EOF&#xA;fi&#xA;cat &amp;lt;&amp;lt; EOF&#xA;}&#xA;EOF&#xA;&#xA;# Use ELILO's generic &quot;efifb&quot; when it's known to be available.&#xA;# FIXME: We need an interface to select vesafb in case efifb can't be used.&#xA;if [ &quot;x$GRUB_GFXPAYLOAD_LINUX&quot; != x ] || [ &quot;$gfxpayload_dynamic&quot; = 0 ]; then&#xA;  echo &quot;set linux_gfx_mode=$GRUB_GFXPAYLOAD_LINUX&quot;&#xA;else&#xA;  cat &amp;lt;&amp;lt; EOF&#xA;if [ &quot;\${recordfail}&quot; != 1 ]; then&#xA;  if [ -e \${prefix}/gfxblacklist.txt ]; then&#xA;    if hwmatch \${prefix}/gfxblacklist.txt 3; then&#xA;      if [ \${match} = 0 ]; then&#xA;        set linux_gfx_mode=keep&#xA;      else&#xA;        set linux_gfx_mode=text&#xA;      fi&#xA;    else&#xA;      set linux_gfx_mode=text&#xA;    fi&#xA;  else&#xA;    set linux_gfx_mode=keep&#xA;  fi&#xA;else&#xA;  set linux_gfx_mode=text&#xA;fi&#xA;EOF&#xA;fi&#xA;cat &amp;lt;&amp;lt; EOF&#xA;export linux_gfx_mode&#xA;EOF&#xA;&#xA;# Extra indentation to add to menu entries in a submenu. We're not in a submenu&#xA;# yet, so it's empty. In a submenu it will be equal to '\t' (one tab).&#xA;submenu_indentation=&quot;&quot;&#xA;&#xA;is_top_level=true&#xA;while [ &quot;x$list&quot; != &quot;x&quot; ] ; do&#xA;  linux=`version_find_latest $list`&#xA;  case $linux in&#xA;    *.efi.signed)&#xA;      # We handle these in linux_entry.&#xA;      list=`echo $list | tr ' ' '\n' | grep -vx $linux | tr '\n' ' '`&#xA;      continue&#xA;      ;;&#xA;  esac&#xA;  gettext_printf &quot;Found linux image: %s\n&quot; &quot;$linux&quot; &amp;gt;&amp;amp;2&#xA;  basename=`basename $linux`&#xA;  dirname=`dirname $linux`&#xA;  rel_dirname=`make_system_path_relative_to_its_root $dirname`&#xA;  version=`echo $basename | sed -e &quot;s,^[^0-9]*-,,g&quot;`&#xA;  alt_version=`echo $version | sed -e &quot;s,\.old$,,g&quot;`&#xA;  linux_root_device_thisversion=&quot;${LINUX_ROOT_DEVICE}&quot;&#xA;&#xA;  initrd=&#xA;  for i in &quot;initrd.img-${version}&quot; &quot;initrd-${version}.img&quot; &quot;initrd-${version}.gz&quot; \&#xA;       &quot;initrd-${version}&quot; &quot;initramfs-${version}.img&quot; \&#xA;       &quot;initrd.img-${alt_version}&quot; &quot;initrd-${alt_version}.img&quot; \&#xA;       &quot;initrd-${alt_version}&quot; &quot;initramfs-${alt_version}.img&quot; \&#xA;       &quot;initramfs-genkernel-${version}&quot; \&#xA;       &quot;initramfs-genkernel-${alt_version}&quot; \&#xA;       &quot;initramfs-genkernel-${GENKERNEL_ARCH}-${version}&quot; \&#xA;       &quot;initramfs-genkernel-${GENKERNEL_ARCH}-${alt_version}&quot;; do&#xA;    if test -e &quot;${dirname}/${i}&quot; ; then&#xA;      initrd=&quot;$i&quot;&#xA;      break&#xA;    fi&#xA;  done&#xA;&#xA;  config=&#xA;  for i in &quot;${dirname}/config-${version}&quot; &quot;${dirname}/config-${alt_version}&quot; &quot;/etc/kernels/kernel-config-${version}&quot; ; do&#xA;    if test -e &quot;${i}&quot; ; then&#xA;      config=&quot;${i}&quot;&#xA;      break&#xA;    fi&#xA;  done&#xA;&#xA;  initramfs=&#xA;  if test -n &quot;${config}&quot; ; then&#xA;      initramfs=`grep CONFIG_INITRAMFS_SOURCE= &quot;${config}&quot; | cut -f2 -d= | tr -d \&quot;`&#xA;  fi&#xA;&#xA;  if test -n &quot;${initrd}&quot; ; then&#xA;    gettext_printf &quot;Found initrd image: %s\n&quot; &quot;${dirname}/${initrd}&quot; &amp;gt;&amp;amp;2&#xA;  elif test -z &quot;${initramfs}&quot; ; then&#xA;    # &quot;UUID=&quot; and &quot;ZFS=&quot; magic is parsed by initrd or initramfs.  Since there's&#xA;    # no initrd or builtin initramfs, it can't work here.&#xA;    linux_root_device_thisversion=${GRUB_DEVICE}&#xA;  fi&#xA;&#xA;  if [ &quot;x$is_top_level&quot; = xtrue ] &amp;amp;&amp;amp; [ &quot;x${GRUB_DISABLE_SUBMENU}&quot; != xy ]; then&#xA;    linux_entry &quot;${OS}&quot; &quot;${version}&quot; simple \&#xA;    &quot;${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}&quot;&#xA;&#xA;    submenu_indentation=&quot;$grub_tab&quot;&#xA;&#xA;    if [ -z &quot;$boot_device_id&quot; ]; then&#xA;    boot_device_id=&quot;$(grub_get_device_id &quot;${GRUB_DEVICE}&quot;)&quot;&#xA;    fi&#xA;    # TRANSLATORS: %s is replaced with an OS name&#xA;    echo &quot;submenu '$(gettext_printf &quot;Advanced options for %s&quot; &quot;${OS}&quot; | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {&quot;&#xA;    is_top_level=false&#xA;  fi&#xA;&#xA;  linux_entry &quot;${OS}&quot; &quot;${version}&quot; advanced \&#xA;              &quot;${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT}&quot;&#xA;  for supported_init in ${SUPPORTED_INITS}; do&#xA;    init_path=&quot;${supported_init#*:}&quot;&#xA;    if [ -x &quot;${init_path}&quot; ] &amp;amp;&amp;amp; [ &quot;$(readlink -f /sbin/init)&quot; != &quot;${init_path}&quot; ]; then&#xA;      linux_entry &quot;${OS}&quot; &quot;${version}&quot; &quot;init-${supported_init%%:*}&quot; \&#xA;          &quot;${GRUB_CMDLINE_LINUX} ${GRUB_CMDLINE_LINUX_DEFAULT} init=${init_path}&quot;&#xA;    fi&#xA;  done&#xA;  if [ &quot;x${GRUB_DISABLE_RECOVERY}&quot; != &quot;xtrue&quot; ]; then&#xA;    linux_entry &quot;${OS}&quot; &quot;${version}&quot; recovery \&#xA;                &quot;${GRUB_CMDLINE_LINUX_RECOVERY} ${GRUB_CMDLINE_LINUX}&quot;&#xA;  fi&#xA;&#xA;  list=`echo $list | tr ' ' '\n' | fgrep -vx &quot;$linux&quot; | tr '\n' ' '`&#xA;done&#xA;&#xA;# If at least one kernel was found, then we need to&#xA;# add a closing '}' for the submenu command.&#xA;if [ x&quot;$is_top_level&quot; != xtrue ]; then&#xA;  echo '}'&#xA;fi&#xA;&#xA;echo &quot;$title_correction_code&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where the edited lines are: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;fi&#xA;      echo &quot;    outb 0x728 1&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;&#xA;      echo &quot;    outb 0x710 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;      echo &quot;    outb 0x740 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;      echo &quot;    outb 0x750 0&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;      echo &quot;    insmod gzio&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;      echo &quot;    if [ x\$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi&quot; | sed &quot;s/^/$submenu_indentation/&quot;**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9048" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-21T15:47:47.923" Title="OSX doesn't boot on mac after installing Elementary OS and modifying Grub" Tags="|boot|dual-boot|amd|refind|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11201" PostTypeId="2" ParentId="10557" CreationDate="2017-03-21T16:43:54.570" Score="2" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;$ sudo apt update&#xA;$ sudo apt install nvidia-367 nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For GTX860M you can also try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-375 nvidia-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6194" LastEditorUserId="16827" LastEditDate="2019-12-08T04:01:07.247" LastActivityDate="2019-12-08T04:01:07.247" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11202" PostTypeId="1" AcceptedAnswerId="11207" CreationDate="2017-03-21T18:54:11.333" Score="3" ViewCount="5736" Body="&lt;p&gt;I recently installed Loki (64bit) in another of my laptops (I have Freya in the first one). Loki (as it is in Freya) boots very fast. My problem is in the shut down process. It takes awful long (compared to Freya). Will appreciate any help to troubleshoot this problem. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2019-04-29T16:55:46.073" Title="Loki takes long time to shut down" Tags="|release-loki|shutdown|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11203" PostTypeId="2" ParentId="11202" CreationDate="2017-03-21T19:43:29.930" Score="0" Body="&lt;p&gt;I have the same problem too! What I've seen is that if you turn on the computer and only a few minutes then you turn down the computer it won't last so much this also happens when you open few programs, but when working a lot on the OS it will take a long time for shooting. Hope this can be helpful and that it ain't something you already know&lt;/p&gt;&#xA;" OwnerUserId="9048" LastActivityDate="2017-03-21T19:43:29.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11205" PostTypeId="1" CreationDate="2017-03-21T20:22:02.763" Score="0" ViewCount="108" Body="&lt;p&gt;My issue is that I cannot login on a virtual terminal (getty). So CtlAltF2 does not give me a login prompt. None of the gettys does actually. Only shortly after booting up I can get a prompt but that does not let me login. Under the previous version of eOS this was not a problem. I do not know where to look to fix this, as I am unfamiliar with the systemd setup of recent years&lt;/p&gt;&#xA;" OwnerUserId="9051" LastActivityDate="2024-03-16T05:04:50.697" Title="virtual terminal (getty) inaccessible?" Tags="|release-loki|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11207" PostTypeId="2" ParentId="11202" CreationDate="2017-03-21T20:55:20.100" Score="3" Body="&lt;p&gt;The problem is caused by the Thermal Daemon Service not shutting down properly. The default timeout is 90s. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This can be resolved by changing the timeout length. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run this command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo io.elementary.code /etc/systemd/system.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Delete the # in front of the the two lines below and change the 90s to something lower. I've set mine to 6s and my system shuts down very quickly. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DefaultTimeoutStartSec=90s&#xA;DefaultTimeoutStopSec=90s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="8319" LastEditDate="2019-04-29T16:55:46.073" LastActivityDate="2019-04-29T16:55:46.073" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="11208" PostTypeId="2" ParentId="11205" CreationDate="2017-03-21T22:47:49.507" Score="0" Body="&lt;p&gt;OK, seems to have resolved itself by cycling default runlevels. Still curious then what caused it, but problem solved I guess.&lt;/p&gt;&#xA;" OwnerUserId="9051" LastActivityDate="2017-03-21T22:47:49.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11209" PostTypeId="1" CreationDate="2017-03-22T01:58:53.037" Score="2" ViewCount="198" Body="&lt;p&gt;These 'footprints' seem to disappear after some time but it happens regularly. Any idea what i should look into? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep VGA&#xA;00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)&#xA;01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 635M] (rev a1)&#xA;&#xA;sudo lshw -C display                          &#xA;  *-display               &#xA;       description: VGA compatible controller&#xA;       product: GF108M [GeForce GT 635M]&#xA;       vendor: NVIDIA Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       version: a1&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom&#xA;       configuration: driver=nouveau latency=0&#xA;       resources: irq:31 memory:e0000000-e0ffffff memory:a0000000-bfffffff memory:c0000000-c1ffffff ioport:5000(size=128) memory:e1000000-e107ffff&#xA;  *-display&#xA;       description: VGA compatible controller&#xA;       product: 3rd Gen Core processor Graphics Controller&#xA;       vendor: Intel Corporation&#xA;       physical id: 2&#xA;       bus info: pci@0000:00:02.0&#xA;       version: 09&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: msi pm vga_controller bus_master cap_list rom&#xA;       configuration: driver=i915 latency=0&#xA;       resources: irq:32 memory:e1400000-e17fffff memory:d0000000-dfffffff ioport:6000(size=64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9054" LastEditorUserId="578" LastEditDate="2017-04-07T18:49:47.917" LastActivityDate="2017-04-07T18:49:47.917" Title="My mouse pointer seems to lag visually, leaving cursor 'foot prints'" Tags="|mouse|graphics|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11214" PostTypeId="2" ParentId="11032" CreationDate="2017-03-22T11:06:50.793" Score="3" Body="&lt;p&gt;Solution: change the driver to original Nvidia driver instead of Nouveau driver. Issue was resolved.&lt;a href=&quot;https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia&quot; rel=&quot;nofollow noreferrer&quot;&gt;How To Switch to NVidia driver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-03-22T11:06:50.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11215" PostTypeId="1" CreationDate="2017-03-22T12:57:15.050" Score="0" ViewCount="140" Body="&lt;p&gt;I installed eOS a while ago and I'm pretty happy with it, but a few days ago came a problem. I was playing around with Solaar to get my mouse's SmartShift to work and I may have downloaded and ran the solaar-gnome3 package, which since then, I purged. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since that change, my greeter screen changed from pantheon-greeter to a standard Gnome one and also every time i wake the machine, it stays on a black screen with no option for getting off from it other than hard rebooting the whole thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do without reinstalling the OS? I have a lot of stuff already set up so that would be a darn waste. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My machine if it helps: Thinkpad T440s with i5-4300U with on-board graphics (Intel HD Graphics). Of course I installed additional drivers etc. and as I said it was working great for a long time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="9058" LastActivityDate="2024-03-15T14:01:45.167" Title="Black screen after wake after accidental greeter change" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11217" PostTypeId="1" CreationDate="2017-03-22T17:39:18.700" Score="2" ViewCount="101" Body="&lt;p&gt;Maybe a stupid question. Anyway, how do I run an application from within the applications folder (/usr/share/applications)? There is no run option from within the context menu (mouse right click).Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2017-03-23T03:42:05.447" Title="Running applications" Tags="|applications|context-menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11218" PostTypeId="2" ParentId="9251" CreationDate="2017-03-22T17:42:58.587" Score="0" Body="&lt;p&gt;do you have a logitech wireless mouse or keyboard?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if so,  Does unplugging the wireless receiver bring back the wingpanel? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, Then you need to uninstall the wingpanel with: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove wingpanel-indicator-power&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9059" LastEditorUserId="578" LastEditDate="2017-03-22T20:29:50.080" LastActivityDate="2017-03-22T20:29:50.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11219" PostTypeId="2" ParentId="9330" CreationDate="2017-03-22T17:47:32.770" Score="0" Body="&lt;p&gt;Do you have a logitech wireless mouse or keyboard?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, Try unplugging the receiver and see if the wingpanel comes back&lt;/p&gt;&#xA;" OwnerUserId="9059" LastActivityDate="2017-03-22T17:47:32.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11220" PostTypeId="2" ParentId="10501" CreationDate="2017-03-22T18:10:04.233" Score="1" Body="&lt;p&gt;It is actually possible to ad iCloud calendars via CalDAV. I'm doing it. Your issue might be that you have two factor authentication enabled for your icloud account. If that is the case, you need to generate an application password, here: &lt;a href=&quot;https://appleid.apple.com/account/manage&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appleid.apple.com/account/manage&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, configuring maya is fairly straightforward:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/W1qdv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/W1qdv.png&quot; alt=&quot;maya configuration&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But not everything is perfect. At least for me, there is a bug: The month view shows the appointments correctly, but the right panel (the day view) shows the appointments of the previous day.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since this is somehow trying to use icloud calendars in an unsupported way, I have not bothered to report it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this helps you.&lt;/p&gt;&#xA;" OwnerUserId="9060" LastActivityDate="2017-03-22T18:10:04.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11221" PostTypeId="1" AcceptedAnswerId="11240" CreationDate="2017-03-22T20:21:07.323" Score="0" ViewCount="114" Body="&lt;p&gt;I've had this problem on my desktop when I go to Google Maps on Chrome, it freezes and I can't move the map.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Other browsers, such as the default that came with elementary OS Google Maps works.&lt;/li&gt;&#xA;&lt;li&gt;My laptop, which also runs elementary OS, Google Maps with Chrome works fine.&lt;/li&gt;&#xA;&lt;li&gt;I have the same extensions on my laptop as I do with my desktop Chrome. &lt;/li&gt;&#xA;&lt;li&gt;Resetting and clearing my browser did not work&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Anyone know steps to do?&lt;/p&gt;&#xA;" OwnerUserId="9062" LastEditorUserId="308" LastEditDate="2018-08-07T16:42:58.863" LastActivityDate="2018-08-07T16:42:58.863" Title="Google Maps freezes with Chrome on elementary OS" Tags="|google-chrome|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-01T21:56:07.093" ContentLicense="CC BY-SA 4.0" />
  <row Id="11222" PostTypeId="2" ParentId="11063" CreationDate="2017-03-22T21:28:46.210" Score="-1" Body="&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9063" LastEditorUserId="26" LastEditDate="2017-04-01T17:28:48.900" LastActivityDate="2017-04-01T17:28:48.900" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11223" PostTypeId="2" ParentId="9330" CreationDate="2017-03-22T21:29:04.240" Score="1" Body="&lt;p&gt;I was also having this problem intermittently, but it was due to a different bug and this fix solved it for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8971" LastEditorUserId="578" LastEditDate="2017-03-23T05:28:47.197" LastActivityDate="2017-03-23T05:28:47.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11225" PostTypeId="2" ParentId="11217" CreationDate="2017-03-23T03:42:05.447" Score="2" Body="&lt;p&gt;The files in /usr/share/applications are just desktop configuration files for the Applications menu.  They are not the actual applications.  In fact, if you were to view one of these text files using the Scratch text editor, you'll see that a lot of the files contain the location of the actual binary files, which you CAN run directly from the terminal (some don't have complete executable path locations, because they are already in the default user path).  Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="8971" LastActivityDate="2017-03-23T03:42:05.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11226" PostTypeId="1" AcceptedAnswerId="11227" CreationDate="2017-03-23T13:01:37.197" Score="0" ViewCount="158" Body="&lt;p&gt;I was using &lt;code&gt;Webstorm 2016.1&lt;/code&gt; version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I download &lt;code&gt;Webstorm 2017.1&lt;/code&gt; version from the offical website. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After downloading I extract the &lt;code&gt;tar.gz&lt;/code&gt;. And in terminal, I go to the extracted &lt;code&gt;folder/bin&lt;/code&gt; and execute &lt;code&gt;./webstorm.sh&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I terminate the &lt;code&gt;./webstorm.sh&lt;/code&gt; in terminal, webstorm is closed. Also when I search Webstorm in the applications list, I get the older version. How should I use new version of &lt;code&gt;Webstorm&lt;/code&gt; rather than opening it via &lt;code&gt;./webstorm.sh&lt;/code&gt; command. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="9071" LastActivityDate="2017-03-24T11:30:45.987" Title="Use the new version of Webstorm" Tags="|software-installation|ubuntu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11227" PostTypeId="2" ParentId="11226" CreationDate="2017-03-23T13:18:54.730" Score="1" Body="&lt;p&gt;You have two options. You can run the app from the terminal as long as you add an ampersand at the end of your command. This will prevent webstorm from closing from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, option two and the most practical is to create a .desktop file which will create a launch icon in the Slingshot menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an example file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=x.y&#xA;Name=Webstorm &#xA;Comment=This is my comment&#xA;Exec=/home/user/Documents/webstorm.sh &amp;lt;--- enter the full path to you app&#xA;Icon=/home/user/Pictures/icon.png &amp;lt;-- optional but nice to have&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Utility;Application; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Name the file whatever with a .desktop extension and place it in ~/.local/share/applications&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-23T13:18:54.730" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11229" PostTypeId="2" ParentId="8757" CreationDate="2017-03-23T16:07:46.287" Score="0" Body="&lt;p&gt;After I push 'Super + Space' I have to click twice on an app icon in the dock. After first click Applications Menu closes and second click runs whatever I click in the dock.&#xA;In gnome I can just bounce mouse cursor of the edge to show dock/favorites menu.&#xA;Or maybe if I could configure one of the hot corners to open dock, or if I had any other way to bring up dock fast when app in focus is maximized.&#xA;I mean 'Alt + Tab' switches between apps so slow (comparing to gnome).&#xA;BTW I love using elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just noticed that when you disable dock hiding and maximize your window it will not go behind the dock. It looks bad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OK just realized I can bounce mouse cursor of the bottom edge and it will show the dock. I take all that back and love elementary os even more!&lt;/p&gt;&#xA;" OwnerUserId="9074" LastEditorUserId="9074" LastEditDate="2017-03-23T16:12:50.727" LastActivityDate="2017-03-23T16:12:50.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11230" PostTypeId="2" ParentId="8757" CreationDate="2017-03-23T17:02:35.177" Score="0" Body="&lt;p&gt;If the goal is to manipulate the way the dock appears or doesn't appear, modifications to it's behavior can be accomplished via Elementary Tweaks. Though I don't believe they can be tied to keyboard shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-23T17:02:35.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11232" PostTypeId="2" ParentId="9612" CreationDate="2017-03-24T04:11:29.430" Score="0" Body="&lt;p&gt;Same issue. I am assuming you've followed the directions from the installation guide on the PIA website for 'Linux'. &#xA;This works, not the best solution because you have to do this every time you log in to your linux session, but it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal. Enter these commands. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install openvpn&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this installs openvpn (if you didn't have it)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/openvpn&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this changes your dir to where the program you just installed is located&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo wget https://www.privateinternetaccess.com/openvpn/openvpn.zip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this downloads a bunch of files you'll need&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo unzip openvpn.zip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this unzips the zip&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this shows you a list of the config server files you just unzipped. pick a file to use and then...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo openvpn 'filename-goes-here.ovpn'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(e.g. &lt;code&gt;sudo openvpn 'US East.ovpn'&lt;/code&gt;) make sure you use the apostrophes!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then it'll ask for your user name and pwd. Put them in and you're running your VPN. When you log out, restart, etc you need to open the term and enter some of the commands again as follows..&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cd /etc/openvpn&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;ls -l&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo openvpn 'filename-goes-here.ovpn'&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There are better ways to do this, but this will get you going in the short term.&lt;/p&gt;&#xA;" OwnerUserId="9078" LastEditorUserId="9078" LastEditDate="2017-03-24T16:24:25.783" LastActivityDate="2017-03-24T16:24:25.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11233" PostTypeId="1" AcceptedAnswerId="11446" CreationDate="2017-03-24T06:11:00.147" Score="0" ViewCount="3381" Body="&lt;p&gt;I would like to know if it's possible to install &lt;strong&gt;Scratch text-editor&lt;/strong&gt; in &lt;strong&gt;Ubuntu 16.04&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user8259" LastActivityDate="2017-04-07T18:47:26.407" Title="How to install Scratch Text Editor in Ubuntu 16.04" Tags="|ubuntu|code|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11234" PostTypeId="1" CreationDate="2017-03-24T07:25:42.123" Score="0" ViewCount="337" Body="&lt;p&gt;There's a &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=27222#c24&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug in X Server 1.18.4&lt;/a&gt; that is related to SDL-based video playback. It's impacting my ability to use other Ubuntu-packaged video applications such as Flowblade video editor. Flowblade's dev has assisted me isolating the issue via &lt;a href=&quot;https://github.com/jliljebl/flowblade/issues/358&quot; rel=&quot;nofollow noreferrer&quot;&gt;Black playback screen on Elementary OS 0.4/Loki (Ubuntu 16.04) &amp;amp; MLT 6.0.0.2; works in Shotcut&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using  “xorg crack pushers” team @ &lt;code&gt;ppa:xorg-edgers/ppa&lt;/code&gt; but that almost hosed my install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I update to 1.19?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(EDIT: Cross posted to eOS's &lt;a href=&quot;https://answers.launchpad.net/elementaryos/+question/587929&quot; rel=&quot;nofollow noreferrer&quot;&gt;Launchpad&lt;/a&gt;; apologies if this is discourteous.)&lt;/p&gt;&#xA;" OwnerUserId="2852" LastEditorUserId="2852" LastEditDate="2017-03-24T07:53:13.240" LastActivityDate="2019-04-18T00:03:20.660" Title="Loki: Known bug in X.Org X Server 1.18.4; how to update?" Tags="|release-loki|video-editor|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11235" PostTypeId="2" ParentId="11144" CreationDate="2017-03-24T08:40:23.827" Score="1" Body="&lt;p&gt;I've found a solution in the official code of the &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-pantheon/switchboard-plug-pantheon-shell/master/view/head:/src/Views/Wallpaper.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary settings app&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[DBus (name = &quot;org.freedesktop.Accounts.User&quot;)]&#xA;    interface AccountsServiceUser : Object {&#xA;    public abstract void set_background_file (string filename) throws IOError;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Define Dbus and declare the private member on your class&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//Instance of the AccountsServices-Interface for this user&#xA;private AccountsServiceUser accountsservice = null;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and the implementation&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;try {&#xA;        string uid = &quot;%d&quot;.printf ((int) Posix.getuid ());&#xA;        accountsservice = Bus.get_proxy_sync (BusType.SYSTEM,&#xA;                &quot;org.freedesktop.Accounts&quot;,&#xA;                &quot;/org/freedesktop/Accounts/User&quot; + uid);&#xA;    } catch (Error e) {&#xA;        warning (e.message);&#xA;    }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;is actually what is needed. So you can call&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;accountsservice.set_background_file (path);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For more information about the implementation look in the source of the switchboard project of Elementary at launchpad&lt;/p&gt;&#xA;" OwnerUserId="8343" LastEditorUserId="8343" LastEditDate="2017-03-24T11:27:00.537" LastActivityDate="2017-03-24T11:27:00.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11237" PostTypeId="2" ParentId="11226" CreationDate="2017-03-24T11:30:45.987" Score="0" Body="&lt;p&gt;You could use the new &lt;a href=&quot;https://www.jetbrains.com/toolbox/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Toolbox&lt;/a&gt; to keep your Jetbrains IDEs up-to-date&lt;/p&gt;&#xA;" OwnerUserId="8343" LastActivityDate="2017-03-24T11:30:45.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11238" PostTypeId="2" ParentId="11233" CreationDate="2017-03-24T11:56:54.523" Score="0" Body="&lt;p&gt;I don't know, this is an elementary forum, not Ubuntu. j/k! I'm sure you could build it from source (&lt;a href=&quot;https://launchpad.net/scratch&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/scratch&lt;/a&gt;) but it's really just a fork of Gedit. You can find that in the repositories in Ubuntu and it should work just as well for you. Besides Scratch might look funny in Unity due to it's client-side decorations. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-24T13:35:33.727" LastActivityDate="2017-03-24T13:35:33.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11240" PostTypeId="2" ParentId="11221" CreationDate="2017-03-24T18:23:48.803" Score="0" Body="&lt;p&gt;I experienced severe lag in Google Maps until I disabled Hardware Acceleration (Settings &gt; Advance Settings &gt; Deselect setting under System.)&lt;/p&gt;&#xA;" OwnerUserId="9092" LastActivityDate="2017-03-24T18:23:48.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11241" PostTypeId="2" ParentId="9105" CreationDate="2017-03-24T20:50:30.330" Score="0" Body="&lt;p&gt;This method works flawlessly for me...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.privateinternetaccess.com/pages/client-support/ubuntu-openvpn&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.privateinternetaccess.com/pages/client-support/ubuntu-openvpn&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-24T20:50:30.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11244" PostTypeId="2" ParentId="206" CreationDate="2017-03-25T00:55:34.937" Score="2" Body="&lt;p&gt;I recommend Darktable. It is available in AppCenter, or a newer version is available on &lt;a href=&quot;https://flathub.org/apps/details/org.darktable.Darktable&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9095" LastEditorUserId="308" LastEditDate="2019-12-06T06:17:37.957" LastActivityDate="2019-12-06T06:17:37.957" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11246" PostTypeId="1" AcceptedAnswerId="11250" CreationDate="2017-03-25T09:00:45.107" Score="1" ViewCount="1631" Body="&lt;p&gt;I am getting a hash sum mismatch error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have several ppa's hopefully this is not the cause.&#xA;tweaks, libreoffice, and caffeine, vivaldi, opera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instructions &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3780/update-error-sudo-apt-get-update&quot;&gt;Update error (sudo apt-get update)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if this was dumb for me to delete these repos in the instructions above which did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a list of the updates errors.&#xA;I am having problems installing the printer driver and I think it needs these 386 files.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/binary-amd64/by-hash/SHA256/2fbf9e0fb860af69bb1c3d80156d44eeeac56ea04ab25784edb33dca8e13849e  Hash Sum mismatch&#xA;E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/main/binary-i386/by-hash/SHA256/3602ddd1416465512c9ec028996dc7eb5b1ab2d271e26a4fe445415cad36262b  &#xA;E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/universe/binary-amd64/by-hash/SHA256/5532eca052512fed6ea5f36971ad74b0b052d9faa1b448913acf67b3475cd29a  &#xA;E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/xenial-updates/universe/binary-i386/by-hash/SHA256/821d5d66cf4b825ca62d92e25e953f46981e588e4fbff66fe23f8dabd51cd1ad  &#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-25T15:09:08.957" Title="Hash Sum Mismatch Error" Tags="|apt|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11248" PostTypeId="1" AcceptedAnswerId="11251" CreationDate="2017-03-25T11:22:16.653" Score="0" ViewCount="87" Body="&lt;p&gt;I have Pantheon installed on Ubuntu if it matters..&lt;/p&gt;&#xA;" OwnerUserId="9099" LastActivityDate="2017-03-25T15:22:12.750" Title="Is it possible to drag windows not from their title like holding ALT in Unity?" Tags="|window-management|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11250" PostTypeId="2" ParentId="11246" CreationDate="2017-03-25T15:09:08.957" Score="2" Body="&lt;p&gt;I had the same problem a week ago&lt;br&gt;&#xA;Here's what I did.&lt;br&gt;&lt;br&gt;&#xA;Install &quot;Additional Drivers&quot; from the Appcenter&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/K6u92.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K6u92.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;br&gt;&lt;br&gt;&#xA;Open the &lt;strong&gt;additional drivers&lt;/strong&gt; and Click on the &lt;strong&gt;Ubuntu Software&lt;/strong&gt; tab and click Others as mentioned below&lt;br&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PSI1w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PSI1w.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;br&gt;&lt;br&gt;&#xA;Click &quot;&lt;strong&gt;Select Best server&lt;/strong&gt;&quot; and wait for the network to detect best server and click &quot;&lt;strong&gt;choose server&lt;/strong&gt;&quot;&lt;br&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4ROuc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4ROuc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user8259" LastActivityDate="2017-03-25T15:09:08.957" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11251" PostTypeId="2" ParentId="11248" CreationDate="2017-03-25T15:22:12.750" Score="0" Body="&lt;p&gt;It is, however not with the Alt (Hyper) but the Windows (Super) key held down.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-25T15:22:12.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11252" PostTypeId="2" ParentId="5564" CreationDate="2017-03-25T20:51:11.953" Score="3" Body="&lt;p&gt;Have the same problem and found out that page: &lt;a href=&quot;https://www.linux.com/learn/how-rescue-non-booting-grub-2-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linux.com/learn/how-rescue-non-booting-grub-2-linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the commands from there:&#xA;during grub-menu just enter &lt;code&gt;c&lt;/code&gt; for commandline, than do that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set root=(hd0,1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;linux /boot/vmlinuz-&lt;/code&gt;   (now press TAB many times to find out whats the newest kernel-version. use that) and add &lt;code&gt;root=/dev/sda1&lt;/code&gt; at the end, the full-line should read as the following (but with the right kernel!!)&#xA;&lt;code&gt;linux /boot/vmlinuz-3.13.0-29-generic root=/dev/sda1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to the same with the initrd (use the same init-rd-version as the kernel version!!)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;initrd /boot/initrd.img-3.13.0-29-generic&#xA;&#xA;boot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you should even be able to boot into Elementary OS&lt;/p&gt;&#xA;" OwnerUserId="9102" LastEditorUserId="578" LastEditDate="2017-03-26T07:33:45.643" LastActivityDate="2017-03-26T07:33:45.643" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11253" PostTypeId="2" ParentId="11164" CreationDate="2017-03-25T21:46:37.470" Score="1" Body="&lt;p&gt;This issue is now resolved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I did was update Loki.&#xA;(Unfortunately I do not have anything more specific than this)&lt;/p&gt;&#xA;" OwnerUserId="3103" LastActivityDate="2017-03-25T21:46:37.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11254" PostTypeId="1" CreationDate="2017-03-25T22:04:08.963" Score="0" ViewCount="295" Body="&lt;p&gt;My hardrive was damaged so I had to change it, after so I was given mac osx mavericks I think, I decided to install linux with packaging version of ubuntu 16.0 LTS in ElementaryOS,I made a partition of the hardrive on OSX with disk utilities, I installed rEFInd and installed Linux from a USB by disabling AMD graphic card,I had many problems dealing with ElementaryOS due to AMD graphic cards during this period, after Linux installation rEFInd was uninstalled so I reinstalled rEFInd from OSX which lasted a long time booting(which was the last time I ever boot into OSX on my mac) and at the end after disabling AMD card on Linux booting for grub everything worked fine for linux, but after disabling the graphic card and saving changes to grub in Linux I was no longer available to boot on OSX, rEFInd was showing with OSX option but when I click it , the Apple Logo appeared and then a white/gray apple familiar looking screen showed up and then up to 20 minutes of waiting OSX didn't boot so I needed to turn down the computer, there was another option in grub's options which launched me a&lt;/p&gt;&#xA;&#xA;&lt;p&gt;panic(cpu 98 caller 0xffffff80002aa36b): &quot;pmap_map_bd: Invalid kernel addres\n &quot;0/SourceCache/xnu-1699.32.7/osfnk/l386/pmap_x86_common.co:1470&#xA;Debuggercalled : &#xA;Backtrace (CPU 8), Frame: Return Address&#xA;0xffffff8000010be68 [.....and more lines]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which I don't know what it means, now I cannot even start recovery mode on mac I don't know what I've done, I am sure I did right partitions on OSX which by now I can see with linux where OSX is installed in sda2 a courious thing is that with the linux program that manages partitios a message says:&#xA;No support tools were found for file systems currently present on hard disks in this computer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Partition&#xA;File System&#xA;Support Tools&#xA;URL&#xA;/dev/sda2hfsplushfsplus /dev/sda3hfsplushfsplus&#xA;As long as the support tools for these file systems are not installed you will not be able to modify them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should find packages with these support tools in your distribution's package manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which make reference to the sda 2 partition where OSX is intalled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help please&lt;/p&gt;&#xA;" OwnerUserId="9048" LastActivityDate="2019-05-08T12:02:05.370" Title="After installing Linux in late 2011 macbook pro osx lion doesn't start" Tags="|dual-boot|macbook|macintosh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11255" PostTypeId="1" CreationDate="2017-03-26T05:52:45.633" Score="1" ViewCount="2546" Body="&lt;p&gt;I'm using &lt;a href=&quot;https://github.com/NathanCastle/BootShellCredentialProvider&quot; rel=&quot;nofollow noreferrer&quot;&gt;this open source&lt;/a&gt; to boot to a linux desktop straight from my Windows LogonUI, using the WSL.&lt;br&gt;&#xA;My preferred linux desktop is of course elementary.&lt;br&gt;&#xA;How do I install elementary's desktop on my ubuntu bash on Windows?&lt;/p&gt;&#xA;" OwnerUserId="9106" LastActivityDate="2017-12-21T12:26:17.817" Title="Install Elementary's desktop on Bash for Windows" Tags="|ubuntu|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11256" PostTypeId="2" ParentId="11255" CreationDate="2017-03-26T07:39:34.643" Score="2" Body="&lt;p&gt;You should try to install the &lt;code&gt;elementary-desktop&lt;/code&gt; package&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:elementary-os/stable&#xA;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-26T07:39:34.643" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11258" PostTypeId="1" AcceptedAnswerId="11355" CreationDate="2017-03-26T15:15:19.073" Score="1" ViewCount="1320" Body="&lt;p&gt;In Freya there was a pretty good battery manager, is it possible to use the same program in Loki? &#xA;UPD: the question is about this program (screenshot from home PC with UPS):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/UzkQi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UzkQi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Bj3OL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Bj3OL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="5856" LastEditDate="2017-04-01T11:02:22.890" LastActivityDate="2017-04-01T13:58:07.837" Title="Battery information in Loki?" Tags="|release-loki|settings|battery|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11259" PostTypeId="1" CreationDate="2017-03-26T16:50:59.770" Score="0" ViewCount="170" Body="&lt;p&gt;In Freya there was a &quot;Next Keyboard Layout&quot; option in Universal Access, but there is no such option in Loki settings. So, how to set this shortcut?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastActivityDate="2017-08-29T11:03:17.710" Title="Next Keyboard Layout shortcut in Loki" Tags="|release-loki|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11265" PostTypeId="1" AcceptedAnswerId="11278" CreationDate="2017-03-26T22:38:45.447" Score="5" ViewCount="4942" Body="&lt;p&gt;I have accidentally installed the &lt;code&gt;mate-screensaver&lt;/code&gt; using the AppCenter. Which did mess up many visual elements (icons, window decorations, and such). I will probably end up reinstalling the OS as I did not find an easy way to fix it (it is a new install, not a huge deal). However, is there a recommended screensaver package which is known to work well with Elementary OS? &lt;/p&gt;&#xA;" OwnerUserId="9104" LastEditorUserId="-1" LastEditDate="2017-04-01T17:37:16.813" LastActivityDate="2023-09-27T14:32:47.947" Title="Screensaver installation" Tags="|release-loki|settings|applications|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11266" PostTypeId="1" CreationDate="2017-03-27T01:32:55.610" Score="0" ViewCount="1695" Body="&lt;p&gt;I just installed elementary OS Loki on my Lenovo yoga 3 pro and can't get the &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; to work. Any suggestions for me?&lt;/p&gt;&#xA;" OwnerUserId="9121" LastEditorUserId="16827" LastEditDate="2019-04-13T13:39:24.787" LastActivityDate="2020-01-20T09:16:39.130" Title="elementary OS WiFi problem Lenovo" Tags="|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11268" PostTypeId="2" ParentId="11266" CreationDate="2017-03-27T08:45:14.330" Score="1" Body="&lt;p&gt;The Broadcom wifi chipset requires a proprietary driver to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run these commands to install and enable it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install bcmwl-kernel-source&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo modprobe -r ideapad_laptop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More on &lt;a href=&quot;https://github.com/longsleep/yoga3pro-linux/blob/master/Yoga%203%20Linux%20HOWTO.md#wifi&quot; rel=&quot;nofollow noreferrer&quot;&gt;this how-to&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user8124" LastActivityDate="2017-03-27T08:45:14.330" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11269" PostTypeId="1" AcceptedAnswerId="11270" CreationDate="2017-03-27T09:31:22.550" Score="0" ViewCount="171" Body="&lt;p&gt;Trying to build pantheon-mail I bump into this error when running &lt;code&gt;cmake&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CMake Error at src/CMakeLists.txt:493 (message):&#xA;  WebKitGTK not installed / unknown version detected&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which version of WebKitGTK should be installed and what is the exact apt package name?&lt;/p&gt;&#xA;" OwnerUserId="8087" LastActivityDate="2017-03-27T09:51:44.043" Title="WebKitGTK not installed / unknown version detected" Tags="|pantheon-mail|development|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11270" PostTypeId="2" ParentId="11269" CreationDate="2017-03-27T09:40:33.100" Score="1" Body="&lt;p&gt;Found it: &lt;code&gt;sudo apt-get build-dep pantheon-mail&lt;/code&gt; installs all dev dependencies.&lt;/p&gt;&#xA;" OwnerUserId="8087" LastEditorUserId="8087" LastEditDate="2017-03-27T09:51:44.043" LastActivityDate="2017-03-27T09:51:44.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11273" PostTypeId="2" ParentId="8812" CreationDate="2017-03-27T10:58:45.573" Score="1" Body="&lt;p&gt;I'm curious if your desktop failed to start, or maybe it hung for a long time. (long time = 2-3 or more minutes)  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On 3 different installs, I've seen this problem happen after installing the latest system updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On all of them, I solved the problem by going to terminal and running this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4130" LastActivityDate="2017-03-27T10:58:45.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11277" PostTypeId="2" ParentId="11234" CreationDate="2017-03-27T13:53:35.337" Score="1" Body="&lt;p&gt;This upgrade is &lt;a href=&quot;https://launchpad.net/ubuntu/xenial/+source/xorg-server&quot; rel=&quot;nofollow noreferrer&quot;&gt;handled upstream&lt;/a&gt; by the Ubuntu project. &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1671799&quot; rel=&quot;nofollow noreferrer&quot;&gt;This Launchpad bug&lt;/a&gt; tracks the integration of xserver 1.19.3 into Ubuntu. There are reports of Ubuntu failing to boot with the new version of X Sever, which would line up with the problems you encountered with the exorg-edgers PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds like this update targets the upcoming Ubuntu 17.04, but I wouldn't be surprised if the update was backported to 16.04 in the future.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try installing X Server from the &lt;a href=&quot;https://launchpad.net/~canonical-x/+archive/ubuntu/x-staging&quot; rel=&quot;nofollow noreferrer&quot;&gt;Canonical X Staging PPA&lt;/a&gt;, which includes the in-progress fixes. Fair warning, though: this package is unfinished and meant for a newer version of Ubuntu. Installing it might hose your installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternately, you could wait for the upgrade to reach elementary OS, either by a backport to Ubuntu 16.04 or an upgrade to the Ubuntu base in a future version of elementary. If your elementary OS machine is your daily driver, this is probably the safer bet.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-03-27T13:53:35.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11278" PostTypeId="2" ParentId="11265" CreationDate="2017-03-27T14:05:06.680" Score="3" Body="&lt;p&gt;I'm not aware of a screensaver package that works well with elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;Other popular screensaver options include XScreensaver and GNOME Screensaver, but I wasn't able to find much information about whether these work well with elementary. There are &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/2jprqp/lock_screen_problems_freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;some reports&lt;/a&gt; of GNOME Screensaver messing up the lock screen shortcut.&lt;/p&gt;&#xA;&lt;p&gt;Here's Danielle Foré, the founder of elementary, on screensavers (see &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/755502&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt;):&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I think the general consensus, last time it was discussed, was that it was better to just turn the display off.&lt;/p&gt;&#xA;&lt;p&gt;As stated before, the periodic table has nothing to do with our brand.&lt;/p&gt;&#xA;&lt;p&gt;I'm leaning towards this being a wont fix. Screeensavers are kind of an outdated concept, IMO.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="792" LastEditorUserId="792" LastEditDate="2023-09-27T14:32:47.947" LastActivityDate="2023-09-27T14:32:47.947" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="11281" PostTypeId="1" CreationDate="2017-03-27T18:48:03.963" Score="1" ViewCount="96" Body="&lt;p&gt;I just installed elementary 0.4. It was super-easy to do, congrats to the team.&#xA;Now the app-center shows that I've got 1GB worth of updates to download just for the os alone. That seems a bit scary to me, and my internet access is not unlimited either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question: Will I have any problem if I just wait until elementary 0.5 is released, and then upgrade (if possible) or re-install? (preferably without losing my documents).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot&lt;/p&gt;&#xA;" OwnerUserId="9135" LastActivityDate="2017-05-25T07:07:29.513" Title="Newbie question about updates vs upgrades/installations" Tags="|system-installation|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11284" PostTypeId="1" CreationDate="2017-03-27T21:33:56.197" Score="-1" ViewCount="315" Body="&lt;p&gt;You can see the proof here:&#xA;&lt;a href=&quot;http://giphy.com/gifs/pantheon-files-rename-menu-bug-l4FGtN9vJ8HTtd9Dy/fullscreen&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://giphy.com/gifs/pantheon-files-rename-menu-bug-l4FGtN9vJ8HTtd9Dy/fullscreen&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is already described here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1895/how-can-i-copy-paste-the-file-name&quot;&gt;How can I copy/paste the file NAME?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the answer fom 'Aditya ultra' doesn't work. Nothing happens when you press on the 'paste' option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But pressing 1) rename and 2)Ctrl + V works. It's very strange.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is also present on another laptop where pantheon-files uses the default elementary theme, so the theme doesn't cause the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is really time to fix this, this is one of the most important things that users do with a file manager. &lt;/p&gt;&#xA;" OwnerUserId="8064" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-03-31T13:11:43.840" Title="Huge bug: copy/paste doesn't work in the pantheon-files rename menu" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ClosedDate="2017-04-01T21:06:25.287" ContentLicense="CC BY-SA 3.0" />
  <row Id="11285" PostTypeId="1" CreationDate="2017-03-27T22:33:25.437" Score="1" ViewCount="141" Body="&lt;p&gt;So, i have a 2016 Dell XPS 9550, 4K screen , i7, 32gb Ram and a 1TB M2 SSD. Elementary runs blazingly fast as my native OS. But i have a small bug, when i either have my dell dock plugged in via USB that has Ethernet or on WiFi, if i shut the lid of the laptop and don't shutdown, when i open it back up, all networking has stopped, even though it says I'm connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried sudo services networking restart, and logging out and back in and nothing, the only fix is a reboot....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions??&lt;/p&gt;&#xA;" OwnerUserId="9138" LastActivityDate="2017-03-31T22:06:30.980" Title="Network not working after i close lid of Dell XPS 9550" Tags="|wifi|networking|ethernet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11287" PostTypeId="2" ParentId="11281" CreationDate="2017-03-28T08:44:57.097" Score="1" Body="&lt;p&gt;I am afraid to tell you that in any modern OS (not matter if we talk about MS Windows, Mac OS...)  you should always upgrade as it is necessary for security reasons.  You should work without updates only in a closed system with no connection to internet or any other net (it means using your system for document editing, playing music and things like that). So, if you require connection to internet you must update your system to prevent security issues. The god news is that once you had done this first update the size of updates is small compared to other operating systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Updated: May 25th 2017:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There has been a major update to elementary OS Loki: version 0.4.1. On May 17th so if you can get the ISO you won't have to download many files to have your system updated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information: &#xA;&lt;a href=&quot;https://medium.com/elementaryos/new-release-elementary-os-loki-0-4-1-2a756549ee76&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/new-release-elementary-os-loki-0-4-1-2a756549ee76&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2017-05-25T06:53:59.790" LastActivityDate="2017-05-25T06:53:59.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11288" PostTypeId="1" AcceptedAnswerId="11493" CreationDate="2017-03-28T09:15:34.637" Score="0" ViewCount="113" Body="&lt;p&gt;I tried to uninstall VMware Horizon Client and so I opened the files as root and deleted the files for it in /lib directory and the icon was still there and so I deleted it in a menu editor that I installed earlier but it went into the /home/local/share/applications directory, messing up my wingpanel. Therefore I deleted it but it went back into my menu, and the cycle repeated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help.&lt;/p&gt;&#xA;" OwnerUserId="9098" LastEditorUserId="578" LastEditDate="2017-04-11T06:27:25.077" LastActivityDate="2017-04-30T18:27:15.317" Title="VMware Horizon Client icon not deleting" Tags="|slingshot|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11289" PostTypeId="2" ParentId="11284" CreationDate="2017-03-28T10:44:30.403" Score="2" Body="&lt;p&gt;I think this refers to a known regression due to r2522 that is fixed by r2524.  It should not have affected the stable release and the unstable branch should now be fixed.  Please advise which release and version this is affecting if this is not the case.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-03-28T10:44:30.403" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11293" PostTypeId="1" AcceptedAnswerId="11296" CreationDate="2017-03-28T14:46:46.137" Score="1" ViewCount="234" Body="&lt;p&gt;I accidentally removed Documents from Personal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://scontent-frt3-1.xx.fbcdn.net/v/t34.0-12/17578014_1266426830145491_222405535_n.png?oh=6dbfc83198ec134a34534b173654d217&amp;amp;oe=58DD94F2&quot; alt=&quot;a busy cat&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went to Home directory, and Documents is not showing there anymore. I can't access it from Terminal either. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trash doesn't contain it either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I add it back again? &lt;/p&gt;&#xA;" OwnerUserId="9149" LastEditorUserId="9149" LastEditDate="2017-03-29T00:22:51.217" LastActivityDate="2017-03-29T00:22:51.217" Title="How can I add Documents in &quot;Personal&quot;?" Tags="|folder|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11294" PostTypeId="2" ParentId="11293" CreationDate="2017-03-28T17:00:50.253" Score="1" Body="&lt;p&gt;Try going to your home directory then dragging and dropping it into the list?&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-03-28T17:00:50.253" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11296" PostTypeId="2" ParentId="11293" CreationDate="2017-03-28T20:19:20.847" Score="3" Body="&lt;p&gt;I believe you can navigate to your &quot;Documents&quot; folder then right click it. Select &quot;add to bookmarks&quot; or something similar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Here you go&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open up your File Manager&lt;/li&gt;&#xA;&lt;li&gt;Go to &quot;Home&quot;&lt;/li&gt;&#xA;&lt;li&gt;Right click on &quot;Documents&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Bookmark&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&quot;Documents&quot; Should now be under &quot;Personal&quot; alongside your other bookmarks on the left.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-03-28T21:23:27.887" LastActivityDate="2017-03-28T21:23:27.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11297" PostTypeId="1" AcceptedAnswerId="11976" CreationDate="2017-03-29T02:15:05.660" Score="1" ViewCount="683" Body="&lt;p&gt;Situation: I want to change my bootloader from GRUB2 to systemd-boot as it is faster and more lightweight.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem: I do not know where to start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question: How do I change my bootloader from GRUB2 to systemd-boot (or any other bootloaders)? Tutorials will be helpful.&lt;/p&gt;&#xA;" OwnerUserId="9152" LastActivityDate="2017-05-18T13:56:43.510" Title="Using elementaryOS with systemd-boot" Tags="|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11298" PostTypeId="1" AcceptedAnswerId="11301" CreationDate="2017-03-29T06:54:15.103" Score="0" ViewCount="331" Body="&lt;p&gt;I am using elementaryOS Loki. I have installed 4.8 from Ubuntu repository.  But I am still getting 4.4 updates. I don't need 4.4 any more since my computer is working just fine on 4.8. How can make 4.4 from appearing in update list.&lt;br&gt;&#xA;P.S: I know about package blacklist by apt, but I was hoping for different solution.&lt;br&gt;&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2017-03-29T09:42:26.200" Title="I am using Linux kernel 4.8 but still getting 4.4 updates" Tags="|release-loki|kernel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11299" PostTypeId="1" CreationDate="2017-03-29T06:59:10.130" Score="3" ViewCount="5162" Body="&lt;p&gt;I have Loki installed on my laptop and desktop. Appcenter works fine on my laptop, but it doesn't on my desktop. It doesn't show any updates, that tab is empty. I can browse and search for software, but everything has an &quot;install&quot; button, even programs that are already installed. Pressing install results in either Appcenter freezing, or displaying &quot;waiting&quot; forever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can install, remove, and update things just fine from the terminal. I've tried uninstalling and reinstalling appcenter, updating apt, and everything else I  could find here on Stack Exchange.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lLm8Y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lLm8Y.png&quot; alt=&quot;Empty update tab&quot;&gt;&lt;/a&gt;&#xA;Here's the empty update tab, no updates or current software is displayed.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/HJNbQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HJNbQ.png&quot; alt=&quot;Files is not installed, according to Appcenter&quot;&gt;&lt;/a&gt;&#xA;According to Appcenter, Pantheon-files is not installed (it is)&lt;/p&gt;&#xA;" OwnerUserId="4098" LastActivityDate="2017-04-18T01:37:06.503" Title="AppCenter doesn't show updates or install anything" Tags="|release-loki|updates|software-installation|appcenter|" AnswerCount="2" CommentCount="1" ClosedDate="2017-04-18T03:00:23.733" ContentLicense="CC BY-SA 3.0" />
  <row Id="11300" PostTypeId="1" AcceptedAnswerId="11302" CreationDate="2017-03-29T09:13:38.437" Score="1" ViewCount="221" Body="&lt;p&gt;I'm wondering where I can re-set this function (zoom out and show all workspaces) in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="806" LastEditorUserId="308" LastEditDate="2018-08-07T17:13:12.657" LastActivityDate="2018-08-07T17:13:12.657" Title="Super + S: How do I change this?" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11301" PostTypeId="2" ParentId="11298" CreationDate="2017-03-29T09:42:26.200" Score="4" Body="&lt;p&gt;You can remove all Linux 4.4 kernels via:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge linux-image-4.4.*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However you might want to keep always at least two kernel versions (the running one and a backup in case an upgrade goes wrong).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-29T09:42:26.200" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11302" PostTypeId="2" ParentId="11300" CreationDate="2017-03-29T11:43:53.287" Score="0" Body="&lt;p&gt;You can change the key &lt;code&gt;show-desktop&lt;/code&gt; in &lt;code&gt;org.gnome.desktop.wm.keybindings&lt;/code&gt; via &lt;code&gt;dconf-editor&lt;/code&gt; or &lt;code&gt;gsettings&lt;/code&gt; in a terminal window. It defaults to &lt;code&gt;['&amp;lt;Super&amp;gt;Down', '&amp;lt;Super&amp;gt;s']&lt;/code&gt; so if you only want to disable &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;s&lt;/kbd&gt; you can set it to &lt;code&gt;[&amp;lt;Super&amp;gt;Down]&lt;/code&gt; for instance.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set org.gnome.desktop.wm.keybindings show-desktop &quot;['&amp;lt;Super&amp;gt;down']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-29T11:43:53.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11303" PostTypeId="1" CreationDate="2017-03-29T12:33:30.427" Score="0" ViewCount="397" Body="&lt;p&gt;I've tried so many things to stop the screen tearing and nothing has worked. I have given compton ago, nvidia full pipe line setting, nvidia full power setting and nothing works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really like elementary os but the screen tearing is a big issue for me. Is there any way which works in order to stop screen tearing?&lt;/p&gt;&#xA;" OwnerUserId="9155" LastActivityDate="2017-03-29T16:40:19.880" Title="How to fix screen tearing with Nvidia GTX 970M Elementary OS?" Tags="|display|nvidia|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11306" PostTypeId="2" ParentId="10418" CreationDate="2017-03-29T14:40:59.787" Score="1" Body="&lt;p&gt;I installed Dropbox from the AppCenter and it didn't fly. When I removed it, the red dash sign went with it. It was only after I tried to launch Dropbox and didn't fly that I removed it, so the indicator might be there for something you installed and is not working. I'm a newbie too, but I hope this helps. &lt;/p&gt;&#xA;" OwnerUserId="9111" LastActivityDate="2017-03-29T14:40:59.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11307" PostTypeId="1" CreationDate="2017-03-29T15:53:20.063" Score="1" ViewCount="193" Body="&lt;p&gt;I recently installed elementary 0.4 and I haven't downloaded os updates yet.&#xA;The Edimax EW-7811UN wi-fi usb dongle works right off the bat with elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem is, it also used to work with ubuntu, but after a recent kernel update ubuntu would freeze the moment the dongle would try to connect to a wireless signal. I think I read something about that chipset not being compatible with the new kernel anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu and elementary both being based on same linux type, I believe, does anybody here know if updated elementary works all-right with this wi-fi usb dongle yet? Are ubuntu and elementary kernel updates related? I'd like to avoid the freezing (and forced restart) siuation if possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot&lt;/p&gt;&#xA;" OwnerUserId="9135" LastActivityDate="2019-04-20T05:02:00.343" Title="Newbie question about Edimax EW-7811UN" Tags="|updates|wifi|networking|kernel|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11308" PostTypeId="1" CreationDate="2017-03-29T16:10:17.043" Score="0" ViewCount="1210" Body="&lt;p&gt;My Lenovo ideapad FLEX 4-1130 does not progress past the GRUB2 screen using either UEFI or BIOS modes. In either instance selecting any of the boot options (live, install, oem install, checkdisk) results in a black screen or black screen with a frozen cursor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have turned off secure boot, and enabled legacy support. I've also reviewed as much information related to the problem as I can find, thank you.&lt;/p&gt;&#xA;" OwnerUserId="9157" LastEditorUserId="16827" LastEditDate="2019-04-16T14:16:04.253" LastActivityDate="2023-12-22T09:04:10.470" Title="Lenovo ideapad FLEX 4-1130 Install" Tags="|system-installation|lenovo|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11309" PostTypeId="2" ParentId="1007" CreationDate="2017-03-29T16:10:29.653" Score="3" Body="&lt;p&gt;I ran into a similar issue as the only administator of my machine. If you have another administative user, jena's answer is an easier way.&lt;/p&gt;&#xA;&lt;p&gt;I was really helped by an anwser on askubuntu about resting a lost administrative password.&#xA;&lt;a href=&quot;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&quot;&gt;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;Full  steps :&lt;/h2&gt;&#xA;&lt;p&gt;You need to boot into recovery mode.&lt;/p&gt;&#xA;&lt;p&gt;Boot up the machine, and &lt;em&gt;after&lt;/em&gt; the BIOS screen, hold down the left &lt;kbd&gt;Shift&lt;/kbd&gt; key. You will then be prompted by a menu that looks something like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MQv6f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MQv6f.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I've noticed on some systems that timing when to hit the left &lt;kbd&gt;Shift&lt;/kbd&gt; key can be tricky, sometimes I miss it and need to try it again.&lt;/p&gt;&#xA;&lt;p&gt;If you have &lt;strong&gt;full disk encryption&lt;/strong&gt;, you have to hold down the key &lt;strong&gt;before&lt;/strong&gt; being asked for the disk password. (You will be asked for the password in a command line interface during boot).&lt;/p&gt;&#xA;&lt;p&gt;Hit the down arrow until you select the &lt;strong&gt;2nd entry from the top&lt;/strong&gt; (the one with the &lt;strong&gt;recovery mode in the description&lt;/strong&gt;) and then hit &lt;kbd&gt;Enter&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now you should see this menu:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RRKur.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RRKur.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Using the arrow keys scroll down to &lt;strong&gt;root&lt;/strong&gt; and then hit &lt;kbd&gt;Enter&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You should now see a root prompt, something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;root@elementary:~#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;At this stage you should have a read-only filesystem. You have to remount it with write permissions:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mount -o rw,remount /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now we can set the user back into the sudoers group with the &lt;code&gt;adduser&lt;/code&gt; command. (In this example I will use jorge as the example, you need to substitute whatever the user's username is):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;root@elementary:~# adduser jorge sudo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now you can reboot, and you should be able to use sudo commands. You should make sure that you are part of following groups :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;adm&lt;/li&gt;&#xA;&lt;li&gt;sudo&lt;/li&gt;&#xA;&lt;li&gt;lpadmin&lt;/li&gt;&#xA;&lt;li&gt;sambashare&lt;/li&gt;&#xA;&lt;li&gt;jorge (your username)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;code&gt;jorge@elementary:~$ groups&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can add your user back in these groups with sudo&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;jorge@elementary:~$ sudo adduser jorge adm&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2500" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-03-29T16:10:29.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11310" PostTypeId="2" ParentId="11303" CreationDate="2017-03-29T16:40:19.880" Score="1" Body="&lt;p&gt;Take this with a grain of salt, as I am a fresh Linux user. I have an AMD card and had the same issue. Everything was blurry in games and &quot;out of sync&quot; as I will describe it. I found somewhere somebody suggesting running these commands.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-add-repository ppa:eek:ibaf/graphics-drivers&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I actually did this and then later played Torchlight II. Whatever this did made a big difference as things were way more smooth and less blurry/out of sync. Thus, I believe this task may help you. I just don't know exactly it does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Interestingly, I just tried to run it again as a test and now I get &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;ERROR: '~eek' user or team does not exist.&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So maybe just running &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;is what did the trick for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully someone with more experience will have some drivers for you.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-03-29T16:40:19.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11311" PostTypeId="2" ParentId="10418" CreationDate="2017-03-29T18:44:08.187" Score="0" Body="&lt;p&gt;I tried to recreate your issue. While I was not able to recreate it, here is what I suggest you try. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-software&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to the Mega download page and grab the appropriate .deb&#xA;&lt;a href=&quot;https://mega.nz/sync&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mega.nz/sync&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once that is downloaded, go to your downloads folder and right-click on the mega .deb&#xA;go to &quot;Open with&quot; then &quot;Software Install&quot; &#xA;This will reinstall the program through gnome-software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once Mega is installed open the program and login. &#xA;Then close to program&#xA;Go back to gnome-software&#xA;find the Mega program&#xA;Select &quot;remove&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This got rid of the icon in Wingpanel when I tested it.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-03-29T18:44:08.187" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11313" PostTypeId="1" AcceptedAnswerId="11314" CreationDate="2017-03-29T19:48:26.397" Score="0" ViewCount="266" Body="&lt;p&gt;I've add manually some apps to slingshot menu with .desktop entries.&#xA;Everything works fine when I flick through mennu - there is declared icon and declared name. Although, when I start one o these apps, I see my icon in dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I use search bar in slingshot and type name of an app then I get this app without icon - only grey square with gearwheel.&#xA;It happens only with apps that I added manually to the menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How should I fix it? Should I add something in  Desktop Entry?&#xA;My desktop entry code is like that:&#xA;&lt;code&gt;[Desktop Entry]&#xA;Name=myProgram&#xA;Comment=myComment&#xA;Exec= myExec&#xA;Icon=myIcon&#xA;Terminal=false&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for any help :)&#xA;    `&lt;/p&gt;&#xA;" OwnerUserId="7532" LastEditorUserId="84" LastEditDate="2018-05-06T18:15:23.183" LastActivityDate="2018-05-06T18:15:23.183" Title="No app icon when using search bar" Tags="|applications|slingshot|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11314" PostTypeId="2" ParentId="11313" CreationDate="2017-03-29T20:47:16.393" Score="1" Body="&lt;p&gt;Try this and see if it helps.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install menulibre&#xA;menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;navigate menulibre to the program that is missing its icon. click on the grey square with gearwheel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should open a small menu letting you insert an icon to the shortcut.&#xA;Find an icon or suitable picture and see if this removes the grey squares with gearwheels for you.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-03-29T20:47:16.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11315" PostTypeId="2" ParentId="11285" CreationDate="2017-03-29T21:24:47.637" Score="2" Body="&lt;p&gt;With Ubuntu 16.10 on the XPS 9550 I have the same trouble.  Running the following command after opening the lid fixes the problem for me.  There should be no need to log out and log back in after running the command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://help.ubuntu.com/lts/ubuntu-help/power-suspendfail.html#hardware&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu documentation&lt;/a&gt; seems to say the source of the problem lies in the driver.&lt;/p&gt;&#xA;" OwnerUserId="9159" LastEditorUserId="9159" LastEditDate="2017-03-31T22:06:30.980" LastActivityDate="2017-03-31T22:06:30.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11316" PostTypeId="2" ParentId="11285" CreationDate="2017-03-29T22:39:55.093" Score="0" Body="&lt;p&gt;Mine does this occasionally. I created a script and desk so I created an executable script and Slingshot menu launcher so I wouldn't have to use the command line each time. This is what I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file in Scratch&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save it off as whatever name you want with a .sh extension. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make it executable by running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x networkrestartscript.sh &amp;lt;---insert the file name you gave it&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can then create a menu launcher to run the script with a click by creating a .desktop file and saving it in ~/.local/share/applications. The launcher will then show up in your Slingshot menu and you can lock it to the Plank if you like.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Network Restart&#xA;Comment=Network Restart&#xA;Exec=/home/elementary/Tools/Scripts/network-restart.sh&#xA;Icon=/usr/share/icons/elementaryPlus/emblems/16/emblem-insync-syncing.svg&#xA;Categories=Utility&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-03-30T12:34:35.347" LastActivityDate="2017-03-30T12:34:35.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11317" PostTypeId="1" CreationDate="2017-03-29T23:57:20.583" Score="1" ViewCount="953" Body="&lt;p&gt;I've made a port of awesome Windows application to make fast translations of text (&lt;a href=&quot;https://gist.github.com/wyhasany/d89490272d6a1a5b2cb64b1e6a2d3bf7&quot; rel=&quot;nofollow noreferrer&quot;&gt;QTranslate&lt;/a&gt;). Unfortunately that application uses system tray. After start of that application I see that awfully window. Do you have any idea how to move that small icon into Wingpanel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Cit9o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Cit9o.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9161" LastActivityDate="2018-12-23T16:01:25.377" Title="Wine System Tray inside Wingpanel" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:48:05.533" ContentLicense="CC BY-SA 3.0" />
  <row Id="11318" PostTypeId="2" ParentId="3633" CreationDate="2017-03-30T08:39:03.557" Score="0" Body="&lt;p&gt;There are several options.  I have found that the most simple one is to install &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then click on resources.  I have it selected in the autostart apps and just alt + tab when I want to know.  I used to use the Gnome addon, but I don't use gnome anymore (hint devs).  On the downside, it is only measures each session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oTbMl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oTbMl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-03-30T08:39:03.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11319" PostTypeId="2" ParentId="10765" CreationDate="2017-03-30T08:43:35.950" Score="1" Body="&lt;p&gt;I solved this by doing a fresh install and deleting the Elementary appcenter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove appcenter&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finished and I never use it anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am sure this hurts the devs, and I hope they fix it with future releases.  Basically, if I say I don't want to check for updates.. that means don't check for updates.  (hint).&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-03-30T08:43:35.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11321" PostTypeId="2" ParentId="11307" CreationDate="2017-03-30T13:02:32.610" Score="1" Body="&lt;p&gt;Elementary Loki and Ubuntu 16.04 (which Loki is based on) both operate using Linux kernel 4.4. Though this kernel has incremental updates. Whether these updates would remove hardware support I can't say. But as a test you could force your system to boot using an older kernel. See if the dongle works. If not, try another. If you've exhausted all kernels and it's still not working then it could be cause by something else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can give Grub Customizer a shot at setting your boot kernel. Check instructions on how to install and use it &lt;a href=&quot;https://askubuntu.com/questions/610328/roll-back-kernel&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.417" LastActivityDate="2017-03-30T13:02:32.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11324" PostTypeId="2" ParentId="5610" CreationDate="2017-03-30T20:33:40.347" Score="0" Body="&lt;p&gt;Have you tried maybe to switch the kernel version as it was suggested in this &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8838/6477&quot;&gt;answer&lt;/a&gt;?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've first tried (and succeeded) with a solution concerning driver update, that doesn't seem to work in your case, but maybe kernel switch could do the trick...&lt;/p&gt;&#xA;" OwnerUserId="6477" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-30T20:33:40.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11325" PostTypeId="1" CreationDate="2017-03-30T22:52:31.187" Score="0" ViewCount="905" Body="&lt;p&gt;I have Bluetooth enabled on System Settings, Sharing. But there's no Bluetooth icon on my panel and when I try to send files it searches for devices but it doesn't find my cellphone. My cellphone can't find my laptop as well.&#xA;I even remember using Bluetooth on the Elementary live cd. Why it's not working anymore?&lt;/p&gt;&#xA;" OwnerDisplayName="user9170" LastActivityDate="2017-12-26T13:57:12.217" Title="Bluetooth isn't working, It doesn't find other devices" Tags="|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11326" PostTypeId="2" ParentId="11308" CreationDate="2017-03-31T05:30:33.800" Score="0" Body="&lt;p&gt;You did correct steps, now all you need is to Turn Off UEFI option in BIOS settings. You have enabled Legacy but didn't disabled UEFI. That is the only reason. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, make sure when you boot from bootable USB, select Legacy Boot option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck&lt;/p&gt;&#xA;" OwnerUserId="8165" LastActivityDate="2017-03-31T05:30:33.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11327" PostTypeId="1" AcceptedAnswerId="11351" CreationDate="2017-03-31T07:22:01.493" Score="0" ViewCount="2553" Body="&lt;p&gt;I would greatly appreciate help or advice on the following issue \ as I am totally stuck. I have been using Linux for a long time but I am a biologist. So deep down my knowledge on how works a computer is limited. I will try to describe as well as possible the problem. Looks to me this is not a new problem but when I tried solutions seen in various posts I had no luck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two months ago I installed elementary OS (Loki) on the old MacBookPro (2008) of my wife. No double boot option. Just elementary OS. On the install, everything went super smooth. My wife was super happy, as the computer now worked very well and was faster than using the latest MacOS. Occasionally she mentioned that the computer took very long to wake up from the sleep mode (when she closed the computer screen). &#xA;Two days ago she calls me at work saying that the computer did not wake from sleep and that after restarting (by pressing 5 sec on the power button), there is a new screen coming up and then black screen. &#xA;Indeed when I come home I see that upon restart, a GNU Grup window (version 2.02) with a choice between elementary or Advanced option for elementary. This is new indeed as usually, after starting the computer, elementary starts directly. And yes if I hit enter on elementary the screens turn black and nothing happens even if we wait for hours (I did try that). &#xA;I restarted the computer and tried my chance using the advanced options. There I have to choose between two versions (4.4.0-63-generic or   4.4.0-62-generic) of eOS with additional options (upstart or recovery mode). I tried all the options with no luck. If I hit recovery mode there are a bunch of lines that comes up but computer freezes quickly (1.3456 s) at a line that says ehci-pci 0000:00:04.1: irq 22, io mem 0xdf489200.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After doing some search on the internet I tried the following: (but nothing worked so far)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Start eOS and modify boot option and add acpi=off.  This got me very close to success. elementary started just fine (I could see the entire desktop) but the touchpad and keyboard were totally unresponsive.  It looked like wifi had a problem too. I tried to plug a usb mice but no success. Today I will bring back from work a keyboard but I doubt this will work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) start eOS in recovery mode  with acpi=off. This got me to an old fashion looking windows and on a pink background with a bunch of interesting options like resume, clean, dpkg, fcsk, grup (update gup loader) … but there is nothing I can do as my keyboard was not reactive anymore at this stage &lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Start eOS and modify boot option and add nomodeset instead of quiet psalsh: black screen. I tried a few other things I forgot without success&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) if I go into the grub command line  menu (by typing c) and typed “ls” I see a list of partitions but at the end it says (cd0) error:failure reading sector 0x0 from 'cd0'. If I explore the partitions using ls I can see my wife's data so this is good (of course, she did not back up her most recent work, despite having dropbox installed ….)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5) I found a post that suggest to use the grup command line and the option configfile (hd0, gpt4)/boot/grub/grub.cfg. But upon reboot still black screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6) I plugged the install USB drive and press the option key after rebooting. Then if I click on an icon that says EFI boot, I can see very briefly a short error message but I could not read it. Then I go back to a grub menu with 4 options: Try eOS without installing, Install eOS, OEM install or check for disc defects. Nothing worked just black screen when I hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So basically I am stuck. I have two main concerns. My wife needs some data not backed-up. I am worried I can not start eOS from the USB drive.  I know this looks like previous similar questions but I could not manage to fix my computer using other posts. I am not far but need a bit of help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot for your help&lt;/p&gt;&#xA;" OwnerUserId="9173" LastActivityDate="2017-04-01T11:32:39.080" Title="Sudden boot failure. Black screen" Tags="|release-loki|boot|grub|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11328" PostTypeId="1" AcceptedAnswerId="11329" CreationDate="2017-03-31T07:49:26.320" Score="0" ViewCount="158" Body="&lt;p&gt;Almost always after a sleep or hibernate (I'm not entirely sure which) most fonts, such as those in &lt;strong&gt;Terminal&lt;/strong&gt; and most other programs (not Firefox) disappear. How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using the Loki version of the OS.&lt;/p&gt;&#xA;" OwnerUserId="7853" LastEditorUserId="7853" LastEditDate="2017-03-31T07:53:57.383" LastActivityDate="2019-04-21T12:03:15.733" Title="Fonts and some graphics disappear / lost after hibernate / sleep / resume / cycle" Tags="|pantheon-terminal|graphics|suspend|fonts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11329" PostTypeId="2" ParentId="11328" CreationDate="2017-03-31T07:53:32.573" Score="1" Body="&lt;p&gt;&lt;em&gt;Prof. Falken.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched on forums high and low to solve this issue. I can not remember where I found the solution, but this worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-image-generic-hwe-16.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The consensus seemed to be that there is a slight problem with the Intel graphics driver in the default kernel and that switching to the generic kernel works around or fixes the issue.&lt;/p&gt;&#xA;" OwnerUserId="7853" LastActivityDate="2017-03-31T07:53:32.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11330" PostTypeId="1" AcceptedAnswerId="11332" CreationDate="2017-03-31T08:07:11.740" Score="2" ViewCount="3736" Body="&lt;p&gt;my pantheon desktop takes a long time to load, what's something that wasn't present before. The login screen appears immediately, but after I enter the password and the desktop is loading, it takes like 30-40 seconds which I don't consider normal as I'm running a i5 + 8 GB RAM + SSD computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried to disable all of my start-up scripts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My installed apps (out of the AppCenter) are:&#xA;WPS Office&#xA;Viber&#xA;Messenger for Desktop&#xA;Spotify&#xA;Vivaldi, Opera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the rest is from the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it's very incosistent in happening. Sometimes it happens, sometimes it loads immediately. I have tried it even now and it loaded immediately, twice before it had the delay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what might be causing this? If any logs are needed, just let me know what to put into terminal and I'll provide them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;//although I'm no developer, I'd say maybe it's because I'm connecting to the internet through WiFi and it's somehow dependant on it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="9175" LastEditorUserId="9175" LastEditDate="2017-03-31T08:19:58.550" LastActivityDate="2017-03-31T12:56:24.223" Title="pantheon desktop takes a long time to load" Tags="|boot|pantheon|" AnswerCount="1" CommentCount="1" ClosedDate="2017-03-31T19:15:23.763" ContentLicense="CC BY-SA 3.0" />
  <row Id="11331" PostTypeId="2" ParentId="11325" CreationDate="2017-03-31T08:59:25.897" Score="0" Body="&lt;p&gt;I think it's a known bug for few months.&#xA;I have the same problem and the only way to activate Bluetooth is to use&#xA;'bluetooth on'&#xA;in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can use Bluetooth from wingpanel or go to system settings and add new device - for me it seems that bluetooth icon disappeared from system settings and the only way to get to it is to use tray icon and enter settings from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've asked similar question a month ago and that's the only way for me. :/&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-03-31T08:59:25.897" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11332" PostTypeId="2" ParentId="11330" CreationDate="2017-03-31T12:56:24.223" Score="3" Body="&lt;p&gt;This is probably a duplicate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10726/delay-to-start-elementary-os-0-4-loki-64-bit/10727#10727&quot;&gt;Delay to Start Elementary OS 0.4 Loki (64-bit)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.683" LastActivityDate="2017-03-31T12:56:24.223" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11333" PostTypeId="2" ParentId="11284" CreationDate="2017-03-31T13:11:43.840" Score="0" Body="&lt;p&gt;Cara, the 'problem' or 'bug' is happening at the point where you click on the filename (when it is editable, in white text / green background) and it changes it's appearance back to white on dark gray. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once it's white on dark gray, you are dealing with the file, not the filename.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it turns white on dark gray, and you click 'Paste' then you are pasting whatever is on the clipboard to the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm about to install this OS for the first time, but it seems clear that you are a) copying the &lt;strong&gt;file&lt;/strong&gt;, not the filename, and b) pasting (a file) to the &lt;strong&gt;file&lt;/strong&gt;, not to the file name.  &lt;/p&gt;&#xA;" OwnerUserId="9178" LastActivityDate="2017-03-31T13:11:43.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11334" PostTypeId="2" ParentId="11215" CreationDate="2017-03-31T15:10:14.370" Score="0" Body="&lt;p&gt;Got it after a while. Probably some software update broke lightdm. All it took was purging and reinstalling it and after the installation choosing lightdm again. Works ok now.&lt;/p&gt;&#xA;" OwnerUserId="9058" LastActivityDate="2017-03-31T15:10:14.370" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11335" PostTypeId="1" CreationDate="2017-03-31T15:40:26.390" Score="0" ViewCount="757" Body="&lt;p&gt;I installed ibus-anthy but it didn't appear on keyboard layout.&lt;/p&gt;&#xA;" OwnerDisplayName="user9170" LastActivityDate="2019-04-20T04:06:16.190" Title="How do I type in Japanese (anthy)?" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11337" PostTypeId="2" ParentId="11317" CreationDate="2017-03-31T18:56:48.177" Score="0" Body="&lt;p&gt;I guess this answers it even if it is a &quot;Won't fix&quot;: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Wine uses an ancient system tray that is not supported.&#xA;  &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1221158&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1221158&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-31T18:56:48.177" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11338" PostTypeId="1" CreationDate="2017-03-31T19:08:23.150" Score="0" ViewCount="1524" Body="&lt;p&gt;I want to ask you where the bugs can be reported?&#xA;Most annoying, what I found in the Loki release: after update &amp;amp; restart every time the wingpanel and plank stops loading. I had just an empty screen, as workaround I kill the Xorg from the console.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for the answers.&lt;/p&gt;&#xA;" OwnerUserId="9181" LastActivityDate="2017-03-31T19:35:05.350" Title="Reporting bugs where?" Tags="|release-loki|wingpanel|plank|" AnswerCount="2" CommentCount="0" ClosedDate="2017-04-01T17:37:33.683" ContentLicense="CC BY-SA 3.0" />
  <row Id="11339" PostTypeId="1" CreationDate="2017-03-31T19:11:14.420" Score="0" ViewCount="135" Body="&lt;p&gt;I've noticed that when I close and reopen AppCenter, the size of the updates keeps on increasing, as seen in these screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZVkjU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/ZVkjU.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be causing this to happen?&lt;/p&gt;&#xA;" OwnerUserId="9182" LastActivityDate="2024-03-27T02:01:10.177" Title="Update size keeps increasing? What could be causing this?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11340" PostTypeId="2" ParentId="11338" CreationDate="2017-03-31T19:16:34.530" Score="0" Body="&lt;p&gt;are you sure you aren't affected by this same issue as I was?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11330/pantheon-desktop-takes-a-long-time-to-load&quot;&gt;pantheon desktop takes a long time to load&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try to rename the file throught terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9175" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.500" LastActivityDate="2017-03-31T19:16:34.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11341" PostTypeId="2" ParentId="11338" CreationDate="2017-03-31T19:35:05.350" Score="1" Body="&lt;p&gt;Bugs can be reported at &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementary&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This one you mention seems to come up quite a bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you would like to put a bounty on a bug, you can do so here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.bountysource.com/teams/elementary/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bountysource.com/teams/elementary/issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't know, a bounty is where you can put money towards a bug to give incentive to get it fixed quicker/give it priority.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-03-31T19:35:05.350" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11342" PostTypeId="2" ParentId="11259" CreationDate="2017-03-31T19:46:25.267" Score="1" Body="&lt;p&gt;You have &lt;em&gt;Switch layout&lt;/em&gt; under the &lt;em&gt;Layout&lt;/em&gt; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hHZ0l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hHZ0l.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-31T19:46:25.267" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11343" PostTypeId="2" ParentId="11339" CreationDate="2017-03-31T19:57:07.673" Score="0" Body="&lt;p&gt;As Jena mentioned in their comment, it is new updates being pushed through. Elementary OS is being patched and updated very quickly. The updates stack upon each other and grow in size over time.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-03-31T19:57:07.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11344" PostTypeId="2" ParentId="10924" CreationDate="2017-03-31T20:02:03.247" Score="0" Body="&lt;p&gt;Actually by default none of the partitions mounted permanently (except the / partition) shows up in this Devices list as long as it is not mounted under &lt;code&gt;/media&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you can change this behavior by adding &lt;code&gt;x-gvfs-show&lt;/code&gt; to the mount options in &lt;code&gt;/etc/fstab&lt;/code&gt; like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=f5aa03f7-28a4-435e-84d6-d84529f13532 /data       zfs     defaults,x-gvfs-show  0   2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-03-31T20:02:03.247" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11345" PostTypeId="1" CreationDate="2017-03-31T22:34:36.883" Score="0" ViewCount="2448" Body="&lt;p&gt;I followed these instructions &lt;a href=&quot;https://help.ubuntu.com/community/CitrixICAClientHowTo&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/CitrixICAClientHowTo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However here are the issues being faced:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When using epiphany, my credentials fail everytime. I installed Firefox and the credential issue was resolved, however the bigger problem is I receive a SSL error 47 everytime the client launches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know if a)Does Citrix Receiver even work on eOS?  b)any idea how to get it working?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I swopped over from ubuntu to eOS but this may be a deal breaker for me, which is a pity as i really like eOS so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="9184" LastActivityDate="2024-03-21T02:04:25.523" Title="Trying to install citrix receiver in elementary OS" Tags="|software-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11346" PostTypeId="2" ParentId="11087" CreationDate="2017-04-01T07:03:35.963" Score="1" Body="&lt;p&gt;As you have only one printer in the list, you could not set another one as default. I guess this is really rather a feature than a bug.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-01T07:03:35.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11347" PostTypeId="2" ParentId="10970" CreationDate="2017-04-01T07:11:04.147" Score="0" Body="&lt;p&gt;You might want to run &lt;code&gt;sudo apt install xterm&lt;/code&gt; in a terminal window and test it again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other hand, you might just want to change the way the file opens (as now it is set to be run with &lt;code&gt;xterm&lt;/code&gt;), it depends on the file. You can do this with a right-click on the file you want to open and by selecting the application wanted under the &lt;code&gt;Open with&lt;/code&gt; menu.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-01T07:11:04.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11348" PostTypeId="2" ParentId="10965" CreationDate="2017-04-01T07:21:53.297" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Slingshot&lt;/strong&gt; provides some level of synapse integration, you should be able to search for recently (or frequently) run applications. You might want to implement a third view (view is &quot;as grid&quot; and &quot;as category&quot;) that puts the applications based on your criteria.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Plank&lt;/strong&gt; You have a &lt;code&gt;Keep in dock&lt;/code&gt; option when you right-click on the icons in plank. As for automatic population, running apps appear there so you can easily &quot;bookmark&quot; them for later use with &lt;code&gt;Keep in dock&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-01T07:21:53.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11349" PostTypeId="1" CreationDate="2017-04-01T08:39:38.820" Score="1" ViewCount="537" Body="&lt;p&gt;Some broken packages have been shipped in mainline. Package libcups2 has broken apt completely after an upgrade. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try &lt;strong&gt;apt -f install&lt;/strong&gt; the package manager suggests to remove a whole batch of packages, including &lt;em&gt;elementary-desktop&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;apt upgrade provides the following dependency errors&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following packages have unmet dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; cups-bsd : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; cups-client : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; cups-core-drivers : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; cups-daemon : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; libcups2-dev : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; libcupscgi1 : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; libcupsimage2 : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; libcupsmime1 : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA; libcupsppdc1 : Depends: libcups2 (= 2.1.3-4ubuntu0.2) but 2.1.3-4 is installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried manually installing the debs with version ubuntu0.2, but it hasn't helped. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to apt remove or purge the cups-related packages trows an even longer list of dependencies. Same with using aptitude or apt-get. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;dpkg --reconfigure -a trows these dependency errors&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Errors were encountered while processing:  libcups2-dev:amd64 &#xA;cups-daemon &#xA;cups-core-drivers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Trying to remove the packages brings me back to the same error as above with the libcups2 errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What to do? I assume I can't just accept that apt -f upgrade removes elementary-desktop because it would break the whole desktop environment?&lt;/p&gt;&#xA;" OwnerUserId="9174" LastEditorUserId="9174" LastEditDate="2017-04-02T07:41:17.813" LastActivityDate="2019-04-24T11:01:30.313" Title="(libcups2) dependency hell after apt upgrade" Tags="|release-loki|updates|desktop|apt|dependencies|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11351" PostTypeId="2" ParentId="11327" CreationDate="2017-04-01T11:32:39.080" Score="0" Body="&lt;p&gt;As no help came, I researched more on others solutions and managed to fix my problem !!!!.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I adapted &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;this solution&lt;/a&gt; to my case (small differences between boot files between freya and loki)&lt;br&gt;&#xA;In fact what I had to do was to enter the Grub command line (c) and typed:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;configfile (hd0, gpt1)/efi/ubuntu/grub.cfg &#xA;[instead of (hd0, gpt1)/boot/grub/grub.cfg, as suggested in the post].&lt;/li&gt;&#xA;&lt;li&gt;then hit F10 I booted elementary from the grub menu. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;NO more black screen that time (I could see the elementary logo). But then I had a flashing cursor for ever. I forced reboot and elementary started correctly that time, no more grub menu.  It went straight to the desktop ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I followed/modified the rest of the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1776/how-can-i-fix-a-secure-boot-failing-to-grub-when-i-installed-0-3-1&quot;&gt;instructions&lt;/a&gt; (Even if I am not sure this was necessary)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;sudo cp /boot/efi/EFI/ubuntu/grubx64.efi&#xA;/boot/efi/EFI/ubuntugrubx64.efibackup &lt;/li&gt;&#xA;&lt;li&gt;sudo rm /boot/efi/EFI/ubuntugrubx64.efi&lt;/li&gt;&#xA;&lt;li&gt;sudo cp /boot/grub/x86_64-efi/grub.efi /boot/efi/EFI/ubuntu/grubx64.efi&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I restarted my computer (twice) and no issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course, the big question I have is what the f... happened in the first palce?!!! The computer was working fine for two months and my wife did not install anything ... &lt;/p&gt;&#xA;" OwnerUserId="9173" LastActivityDate="2017-04-01T11:32:39.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11352" PostTypeId="1" AcceptedAnswerId="11368" CreationDate="2017-04-01T11:54:08.160" Score="1" ViewCount="1551" Body="&lt;p&gt;I have hp Elitebook 8470p with win 10 as primary OS.&lt;br&gt;&#xA;I want to install elementary OS Loki 0.4 and i'm wondering which boot option should i use in BIOS settings.&lt;br&gt;&lt;br&gt;&#xA;There are 3 options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Legacy (default)&lt;/li&gt;&#xA;&lt;li&gt;UEFI Hybrid&lt;/li&gt;&#xA;&lt;li&gt;UEFI Native &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Considering that the installation of elementary OS didn't give me the option of Install alongside Windows  &lt;/p&gt;&#xA;" OwnerUserId="9186" LastEditorUserId="308" LastEditDate="2018-08-07T17:08:38.150" LastActivityDate="2018-08-07T17:09:07.857" Title="Which Boot option should i use?" Tags="|release-loki|system-installation|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11353" PostTypeId="1" CreationDate="2017-04-01T12:09:01.587" Score="2" ViewCount="567" Body="&lt;p&gt;The map is loading, I can zoom in and out, but I can't go to any location that I search for in the search bar. If I click on the location in the search results nothing happens. Do I have to install something additional? I've booted Ubuntu Gnome from an USB and Maps works there.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2019-03-15T20:57:49.223" Title="Gnome Maps not working properly" Tags="|release-loki|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11355" PostTypeId="2" ParentId="11258" CreationDate="2017-04-01T13:58:07.837" Score="2" Body="&lt;p&gt;This was (and is) a Gnome application that you can run with the &lt;code&gt;gnome-power-statistics&lt;/code&gt; command (if neeeded, it is in the &lt;code&gt;gnome-power-manager&lt;/code&gt; package).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2yxBT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2yxBT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-01T13:58:07.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11356" PostTypeId="1" CreationDate="2017-04-01T14:21:20.757" Score="3" ViewCount="1001" Body="&lt;p&gt;Since the last system update, my System Sound (Master Volume) is not working anymore.&#xA;My sound is working on any Player, if I use HTML5 on YouTube, Flash on Facebook or mp3 in the elementary Music App everything is working, but only with 50% volume and i can adjust the volume between 0 and 50% in the Player, but i cannot adjust the volume in the system (Master Volume). The icon in the System-Tray is inactive, an shows a X.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried to fix it with these commands&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Go-to your terminal and try this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo alsa force-reload &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;And than restart your pc again. Still you face&#xA;  the similar problem than try this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge alsa-base pulseaudio&#xA;&#xA;sudo apt-get install alsa-base pulseaudio &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;And than&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Now restart and check again. It might be work&#xA;  now.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;but is not working for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &quot;lspci&quot; shows a Intel Audio, but these is wrong.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)&#xA;00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)&#xA;00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)&#xA;00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)&#xA;00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)&#xA;00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)&#xA;00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)&#xA;00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)&#xA;00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) &#xA;00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)&#xA;00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)&#xA;00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)&#xA;01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Whistler [Radeon HD 6630M/6650M/6750M/7670M/7690M]&#xA;01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks/Whistler HDMI Audio [Radeon HD 6000 Series]&#xA;02:00.0 Ethernet controller: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet (rev c0)&#xA;03:00.0 Network controller: Qualcomm Atheros AR9287 Wireless Network Adapter (PCI-Express) (rev 01)&#xA;05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My Laptop is a: Acer Aspire 7750G&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound card is a: Realtek&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Windows 10 i tried to install the original Realtek driver, with the message: Error: device not found.&#xA;Only the Acer Realtek Audio Driver works on my Laptop in Windows 7 and 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Acer Homepage, &lt;a href=&quot;https://www.acer.com/ac/en/US/content/support-product/3476?b=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Driver for the Aspire 7750G&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9188" LastEditorUserId="9264" LastEditDate="2017-04-22T12:48:31.553" LastActivityDate="2020-07-27T14:40:07.603" Title="System Sound (Master Volume) is not working anymore" Tags="|system|drivers|audio|acer|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11357" PostTypeId="1" AcceptedAnswerId="11433" CreationDate="2017-04-01T14:41:03.503" Score="1" ViewCount="115" Body="&lt;p&gt;I have removed &lt;code&gt;apt&lt;/code&gt; as I was removing keyring with the Synaptic Package Manager.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Removed the following ESSENTIAL packages: apt&#xA;&#xA;Completely removed the following packages: ubuntu-keyring&#xA;&#xA;Removed the following packages: apt-utils unattended-upgrades&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How to fix this?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Thanks for the reply&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(Reading database ... 186695 files and directories currently installed.)&#xA;Preparing to unpack .../apt_1.2.15ubuntu0.2_amd64.deb ...&#xA;Unpacking apt (1.2.15ubuntu0.2) over (1.2.15ubuntu0.2) ...&#xA;dpkg: dependency problems prevent configuration of apt:&#xA; apt depends on ubuntu-keyring; however:&#xA;  Package ubuntu-keyring is not installed.&#xA;&#xA;dpkg: error processing package apt (--install):&#xA; dependency problems - leaving unconfigured&#xA;Processing triggers for libc-bin (2.23-0ubuntu7) ...&#xA;Processing triggers for man-db (2.7.5-1) ...&#xA;Errors were encountered while processing:&#xA; apt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9188" LastEditorUserId="26" LastEditDate="2017-04-14T00:19:13.680" LastActivityDate="2017-04-14T00:19:13.680" Title="I extendedly removed apt package manager, how to fix?" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11359" PostTypeId="1" CreationDate="2017-04-01T15:48:33.853" Score="0" ViewCount="432" Body="&lt;p&gt;In Freya it is possible to show either remaining battery life (in hours:minutes) or percentage. How to do the same thing (show &lt;strong&gt;both&lt;/strong&gt; percentage and remaining time) in Loki?&lt;/p&gt;&#xA;" OwnerUserId="5856" LastEditorUserId="5856" LastEditDate="2017-04-01T18:41:35.770" LastActivityDate="2019-04-24T07:01:15.250" Title="Is it possible to show both percentage and remaining battery life on wingpanel?" Tags="|release-loki|wingpanel|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11360" PostTypeId="1" AcceptedAnswerId="14121" CreationDate="2017-04-01T16:20:08.490" Score="0" ViewCount="135" Body="&lt;p&gt;In Photos, when I first open the app, and select a picture I have all the editing options, but if I go back to the library view and select ANY photo after that the only tool shown at the bottom is the Slideshow icon. See photo: &lt;a href=&quot;https://i.stack.imgur.com/DtsDs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DtsDs.png&quot; alt=&quot;only the slideshow icon remains&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to restore the Photos app to it's original state? I've considered apt purge, but I'm a little nervous about uninstalling a native application.&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2018-03-11T00:17:30.017" Title="Photos missing crop, automatically improve, etc" Tags="|icons|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11361" PostTypeId="2" ParentId="11359" CreationDate="2017-04-01T17:37:09.230" Score="1" Body="&lt;p&gt;Right click on the battery icon and click &quot;Show Percentage&quot;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-01T17:37:09.230" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11363" PostTypeId="2" ParentId="8858" CreationDate="2017-04-02T04:12:23.207" Score="0" Body="&lt;p&gt;The same problem happened to me, the problem was that my computer didn't &quot;know&quot; that Libre Office was installed, so when I installed it from the terminal it worked again&lt;/p&gt;&#xA;" OwnerUserId="9195" LastEditorUserId="7532" LastEditDate="2017-04-17T14:05:52.710" LastActivityDate="2017-04-17T14:05:52.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11365" PostTypeId="1" CreationDate="2017-04-02T06:45:53.163" Score="0" ViewCount="124" Body="&lt;p&gt;I'm trying to get into developing for Elementary using Vala. I have been unsuccessfully trying to build Valama (an IDE for Vala) for ages but keep hitting hurdles.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently when I try to make Valama (having satisfied all dependencies) I get the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;error: Package 'webkit2gtk-3.0' not found in specified Vala API directories or GObject-Introspection GIR directories&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have &lt;code&gt;apt-get install&lt;/code&gt;'d both &lt;code&gt;webkit2gtk-3.0&lt;/code&gt; and &lt;code&gt;webkit2gtk-3.0-dev&lt;/code&gt; but the error persists. Any idea how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="9196" LastActivityDate="2017-06-03T07:00:03.000" Title="Missing Library" Tags="|development|vala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11367" PostTypeId="1" AcceptedAnswerId="11665" CreationDate="2017-04-02T11:28:48.260" Score="0" ViewCount="3239" Body="&lt;p&gt;I am trying to install elementary OS on the new XPS 9560.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It comes with windows 10 home. I have installed it, and I have resized my SSD by about half.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I currently have around 480 GB of unallocated space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then rufus up a bootable USB with correct hash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then boot it up and get to the install mode. But when I come to the part of &quot;Installation type&quot; it doesn't see any device and I don't have access to gparted or anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a common occurance?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope someone can help. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="9199" LastActivityDate="2020-01-10T10:18:52.163" Title="Can't see my SSD when installing" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11368" PostTypeId="2" ParentId="11352" CreationDate="2017-04-02T11:33:21.870" Score="1" Body="&lt;p&gt;After a couple of searches .&lt;br&gt;&#xA;The difference between UEFI Boot and Legacy boot is the process that the firmware uses to find the boot target.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Legacy Boot is the boot process used by BIOS firmware. The firmware maintains a list of installed storage devices that may be bootable (Floppy Disk Drives, Hard Disk Drives, Optical Disk Drives, Tape Drives, etc...) and enumerates them in a configurable order of priority. One the POST procedure has completed, the firmware loads the first sector of each of the storage targets into memory and scans it for a valid Master Boot Record (MBR). If a valid MBR is found, the firmware passes execution to the boot loader code found in the MBR which allows the user to select a partition to boot from. If one is not found, it proceeds to the next device in the boot order. If no MBR is found at all, the user is presented with the famous &quot;Please insert system disk yadda yadda yadda&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UEFI boot is the boot process used by UEFI firmware. The firmware maintains a list of valid boot volumes called EFI Service Partitions. During the POST procedure the UEFI firmware scans all of the bootable storage devices that are connected to the system for a valid GUID Partition Table (GPT). Unlike a MBR, a GPT does not contain a boot loader. The firmware itself scans the GPTs to find an EFI Service Partition to boot from. If no EFI bootable partition is found, the firmware can fall back on the Legacy Boot method. If both UEFI boot and Legacy boot fail, the famous &quot;Please insert system disk yadda yadda yadda&quot; will be presented.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In general, UEFI boot is more desirable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i let the options as the Default choice (Legacy in my case).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The steps of my installation :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Shrink one of my partitions in windows 10 disk management (30GB) and creating a new partition (E: like exemple).&lt;/li&gt;&#xA;&lt;li&gt;Create a bootable USB Using rufus (elementary OS Loki 0.4) &lt;/li&gt;&#xA;&lt;li&gt;Restarting the computer and boot from the USB &lt;/li&gt;&#xA;&lt;li&gt;install elementary OS ... Choosing the language connect to network (optional)&lt;/li&gt;&#xA;&lt;li&gt;In the choices of installation in my case i didn't find install alongside win10 so i chose something else &lt;/li&gt;&#xA;&lt;li&gt;I deleted the partition that i create in step 1 and now i have a 30GB free space, i created one partition for swap (2GB in my case) and one for /home (5GB in my case), the rest for the / partition .&lt;br&gt;&lt;br&gt;&#xA;and i can dual boot elementary OS Loki Alongside win10&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9186" LastEditorUserId="308" LastEditDate="2018-08-07T17:09:07.857" LastActivityDate="2018-08-07T17:09:07.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11369" PostTypeId="1" AcceptedAnswerId="11738" CreationDate="2017-04-02T11:44:09.350" Score="0" ViewCount="208" Body="&lt;p&gt;I have added some songs in the Music directory and renamed some existing files. I don't see any button to refresh playlist on the Music app.&lt;/p&gt;&#xA;" OwnerUserId="8575" LastActivityDate="2017-04-29T06:01:27.640" Title="How to refresh playlist in Noise music app?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11370" PostTypeId="1" CreationDate="2017-04-02T11:52:48.403" Score="0" ViewCount="44" Body="&lt;p&gt;In dconf-editor &gt; org &gt; onboard &gt; keyboard, there is teh key-press-modifiers option, set by default to &lt;code&gt;{'button3':'SHIFT'}&lt;/code&gt;. I believe this sometimes interferes with some vim commands. What is &lt;code&gt;button3&lt;/code&gt; and what is this needed for? If I would like to disable it, what would I set it to?&lt;/p&gt;&#xA;" OwnerUserId="9097" LastEditorUserId="578" LastEditDate="2017-04-02T12:43:06.207" LastActivityDate="2017-07-01T13:58:30.313" Title="What is &quot;key-press-modifiers&quot;" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11371" PostTypeId="2" ParentId="11370" CreationDate="2017-04-02T12:41:52.050" Score="1" Body="&lt;p&gt;It is a setting of &lt;code&gt;onboard&lt;/code&gt; (the on-screen keyboard). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use the uppercase letters (and symbols on the other keys) either with shift-click or with the &lt;code&gt;button3&lt;/code&gt; click (right-click in my case). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't use &lt;code&gt;onboard&lt;/code&gt; you don't need to disable it either.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-02T12:41:52.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11372" PostTypeId="1" CreationDate="2017-04-02T13:23:55.513" Score="1" ViewCount="46" Body="&lt;p&gt;Pantheon not responding to mouse clicks, hover or anything &#xA;Pantheon not responding permanently just can move the mouse &lt;/p&gt;&#xA;" OwnerUserId="9201" LastActivityDate="2017-04-02T13:23:55.513" Title="Pantheon not responding permanently just can move the mouse" Tags="|release-loki|pantheon|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11373" PostTypeId="1" AcceptedAnswerId="11386" CreationDate="2017-04-02T13:29:05.737" Score="0" ViewCount="436" Body="&lt;p&gt;So, I just threw all of my music from my iPod 4G (Photo) into the pantheon music app, and all's good there. But when I try to sync my iPod through the music app, I just an error message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a picture of what I'm talking about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fCdBO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fCdBO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only other thing I have running is Chromium, so I have no clue as to what operation it's talking about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something I can do?&lt;/p&gt;&#xA;" OwnerUserId="9200" LastActivityDate="2017-04-03T18:11:08.780" Title="Music won't sync with iPod" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11375" PostTypeId="1" CreationDate="2017-04-02T18:15:37.550" Score="0" ViewCount="266" Body="&lt;p&gt;How do I see and edit keyboard shortcuts for applications like Audience, Noise and Marlin? I looked for it on system settings, keyboard. It isn't in the ui, I couldn't find manual pages for these applications, and there isn't configuration files in my home folder.&lt;/p&gt;&#xA;" OwnerDisplayName="user9170" LastActivityDate="2017-04-02T19:36:27.587" Title="Where do I see the keyboard shortcuts for applications?" Tags="|applications|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11376" PostTypeId="2" ParentId="11365" CreationDate="2017-04-02T19:04:22.000" Score="0" Body="&lt;p&gt;The error message is coming from the Vala compiler and suggests the VAPI file is not being found for webkit2gtk-3.0. It looks likes Valama fixed this by adding &lt;code&gt;webkit2gtk-3.0.vapi&lt;/code&gt; to its repository with this commit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Valama/valama/commit/6a77fadea92eec8b14c5041b091c126d6d3d30a9&quot; rel=&quot;nofollow noreferrer&quot;&gt; CMake: Add webkit2gtk-3.0 vapi to support vala &amp;lt; 0.26 &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe that helps you a little. I tried building Valama on Fedora 23, but CMake reports:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;--   Package 'webkit2gtk-3.0' not found&#xA;CMake Error at /usr/share/cmake/Modules/FindPkgConfig.cmake:360 (message):&#xA;  A required package was not found&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is to do with the pkg-config file &lt;code&gt;webkit2gtk-3.0.pc&lt;/code&gt; not being found. I didn't try any futher to repeat the error message you are getting.&lt;/p&gt;&#xA;" OwnerUserId="9205" LastActivityDate="2017-04-02T19:04:22.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11377" PostTypeId="2" ParentId="11375" CreationDate="2017-04-02T19:36:27.587" Score="2" Body="&lt;p&gt;In the keyboard settings , And Also you can set up your own shortcut in custom .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y7Na5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y7Na5.png&quot; alt=&quot;Keyboard Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9186" LastActivityDate="2017-04-02T19:36:27.587" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11379" PostTypeId="1" CreationDate="2017-04-03T06:54:18.797" Score="1" ViewCount="72" Body="&lt;p&gt;Everything is OK, but when I'm going to use Skype the image is inverted. Are there any virtual camera or similar to solve this problem?&#xA;I use Skype everyday, and I need to find a solution. &#xA;Thanjs&lt;/p&gt;&#xA;" OwnerUserId="9212" LastActivityDate="2017-04-03T06:54:18.797" Title="Camera inverted" Tags="|camera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11380" PostTypeId="2" ParentId="11349" CreationDate="2017-04-03T07:20:33.940" Score="1" Body="&lt;p&gt;Thank you for your input, I found the fix. Add&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.ubuntu.com/ubuntu/ xenial-proposed restricted main multiverse universe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to the /etc/apt/sources.list, and apt upgrade -f automatically resolves the issue.&lt;/p&gt;&#xA;" OwnerUserId="9174" LastActivityDate="2017-04-03T07:20:33.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11381" PostTypeId="1" CreationDate="2017-04-03T09:11:45.747" Score="0" ViewCount="167" Body="&lt;p&gt;If I open a site like artstation.com on Firefox and have Transmission open at the same time my computer crashes.&lt;a href=&quot;https://i.stack.imgur.com/7YXIR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7YXIR.png&quot; alt=&quot;htop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9170" LastActivityDate="2017-04-03T15:02:01.323" Title="Why Firefox and Transmission are using so much memory?" Tags="|performance|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11382" PostTypeId="2" ParentId="11299" CreationDate="2017-04-03T10:48:26.830" Score="0" Body="&lt;p&gt;I had this same issue and this helped:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) remove the eOS repo:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:elementary-os/daily&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.) update/upgrade repos&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.) reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.) add the repo back&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5.) update/upgrade repos&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this should upgrade the AppCenter app as well and it should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, try rebooting - it might help. For me the AppCenter sometimes works, sometimes doesn't... I just reboot and it's probably fine after the next boot.&lt;/p&gt;&#xA;" OwnerUserId="9175" LastEditorUserId="9175" LastEditDate="2017-04-03T12:06:34.513" LastActivityDate="2017-04-03T12:06:34.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11383" PostTypeId="2" ParentId="11381" CreationDate="2017-04-03T13:07:45.827" Score="1" Body="&lt;p&gt;You have only 2GiB of RAM. It's normal that your computer can't handle multitasking really well. You have a few options:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A) Buy some extra RAM. If you have a laptop you can also add more RAM sometimes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;B) Take it easy. Don't rush to open all the programs. Let them some time to load and save their data to the swap. You can also invest in a SSD to make your swap faster.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;C) use more lightweight programs:  &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Instead of Firefox, you can use Epiphany (elementary web browser)  &lt;/li&gt;&#xA;&lt;li&gt;Use a Terminal version of Transmission. &lt;a href=&quot;https://help.ubuntu.com/community/TransmissionHowTo#Transmission_Command_Line&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you have a how-to guide. You don't need to add that PPA listed on the guide. Everything is already on the official repos.  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-04-03T13:07:45.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11384" PostTypeId="2" ParentId="11381" CreationDate="2017-04-03T15:02:01.323" Score="0" Body="&lt;p&gt;Those sound like reasonably normal memory usage numbers for those applications, and 2GB of RAM more than meets the &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;minimum system requirements&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds like you might be running out of swap space. You currently have 2GB of swap space allocated. I'd recommend &lt;a href=&quot;https://askubuntu.com/questions/178712/how-to-increase-swap-space/389067#389067&quot;&gt;increasing the size of your swap partition&lt;/a&gt; to at least 8GB. When you run out of physical memory, your computer should be able to use the swap partition as &quot;extra&quot; memory for applications that you're not actively using. This should prevent &quot;out of memory&quot; crashes.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As a side note, &lt;code&gt;htop&lt;/code&gt; can be a bit misleading with memory usage. By default, it &lt;a href=&quot;https://unix.stackexchange.com/questions/10362/why-does-htop-show-more-process-than-ps#10403&quot;&gt;shows each thread separately&lt;/a&gt;, but all threads for a given command share memory. So, for example, it looks like the Firefox plugin container is using 411 MB of memory x 24 processes, but really it's using a total of 411 MB of memory.&lt;/p&gt;&#xA;" OwnerUserId="792" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-04-03T15:02:01.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11386" PostTypeId="2" ParentId="11373" CreationDate="2017-04-03T18:11:08.780" Score="0" Body="&lt;p&gt;It sounds like this a &lt;a href=&quot;https://bugs.launchpad.net/noise/+bug/1181152&quot; rel=&quot;nofollow noreferrer&quot;&gt;known issue&lt;/a&gt; with Music.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Until this problem is fixed, you could use a standalone sync app such as gtkpod or sync using music player such as Rhythmbox.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-04-03T18:11:08.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11389" PostTypeId="1" CreationDate="2017-04-03T23:39:56.957" Score="1" ViewCount="74" Body="&lt;p&gt;In my computer I have an app's camera and GTK UVC video viwer, I can use it without problems, but when I use hangouts or Skype my image is inverted.&#xA;are there any way to create a virtual camera where i can rotate the image and use it in skype or hangouts?&#xA;In windows there are a software manycam, where you have a virtual camera, change what you want, and use this camera in skype or any other app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any option to solve it?&lt;/p&gt;&#xA;" OwnerUserId="9219" LastActivityDate="2017-04-03T23:39:56.957" Title="Rotate image in google talk and skype" Tags="|webcam|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11390" PostTypeId="1" CreationDate="2017-04-04T05:37:28.490" Score="1" ViewCount="467" Body="&lt;p&gt;I am attempting to make the switch from Windows to Linux, and decided to give Elementary a try. I installed Loki, but I and unable to get WiFi working. It did not work when I booted from the install USB, and it didn't work after I installed it. I'm working with an MSI laptop, with an Intel Dual band Wireless-AC 3168 card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The kernal of Elementary that I have installed is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;4.4.0-38-generic #57-Ubuntu SMP Tue Sep 6 15:42:33 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I run rfkill list all, my results are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: hci0: Bluetooth&#xA;Soft blocked: no    &#xA;Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I run sudo lshw -class network, my results are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network UNCLAIMED     &#xA;description: Network controller&#xA;product: Intel Corporation&#xA;vendor: Intel Corporation&#xA;physical id: 0&#xA;bus info: pci@0000:02:00.0&#xA;version: 10&#xA;width: 64 bits&#xA;clock: 33MHz&#xA;capabilities: pm msi pciexpress cap_list&#xA;configuration: latency=0&#xA;resources: memory:df200000-df201fff&#xA;&#xA;*-network&#xA;description: Ethernet interface&#xA;product: QCA8171 Gigabit Ethernet&#xA;vendor: Qualcomm Atheros&#xA;physical id: 0&#xA;bus info: pci@0000:03:00.0&#xA;logical name: enp3s0&#xA;version: 10&#xA;serial: 4c:cc:6a:dc:41:31&#xA;capacity: 1Gbit/s&#xA;width: 64 bits&#xA;clock: 33MHz&#xA;capabilities: pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;configuration: autonegotiation=on broadcast=yes driver=alx latency=0 link=no multicast=yes port=twisted pair&#xA;resources: irq:128 memory:df100000-df13ffff ioport:d000(size=128)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From what I'm seeing, Elementary just isn't seeing the WiFi card, or at least isn't seeing it correctly. I Googled various solutions for a couple of hours, but didn't find anything that worked. Does anybody have an idea about what I can do to solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hate to say it, but if I can't resolve this, Im either going to have to try a different Linux Distro, or just plan on sticking with Windows for now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help of advice you can offer.&lt;/p&gt;&#xA;" OwnerUserId="9222" LastActivityDate="2018-01-31T22:06:20.557" Title="No WiFi with Loki and Intel Dual Band AC 3168 card" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11391" PostTypeId="1" CreationDate="2017-04-04T08:20:53.143" Score="2" ViewCount="1171" Body="&lt;p&gt;When I copy files over to a USB drive (in Pantheon Files), the transfer starts fast, but then slows down over time.  Once everything is transfered and there are 0 seconds remaining, the transfer just hangs, for multiple minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I stop the transfer then? Is it really done?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you think this is an elementaryOS/Ubuntu issue or just specifically my computer? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do to speed it up?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="9224" LastActivityDate="2018-12-25T16:57:45.923" Title="USB Transfer speeds" Tags="|pantheon-files|usb-drive|usb|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="11392" PostTypeId="1" CreationDate="2017-04-04T09:07:50.210" Score="0" ViewCount="274" Body="&lt;p&gt;When using a trackpad, I prefer to hover my thumb over the lower portion (as there used to be a button there!). Whenever I do that in elementaryOS, the system stops moving the cursor, and assumes I want to do a two finger gesture. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I configure the system to tell it to ignore my thumb at the bottom of the trackpad?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="9224" LastActivityDate="2024-03-28T11:03:25.413" Title="Any tips for setting up thumb rejection (MacBook Air)?" Tags="|touchpad|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11397" PostTypeId="2" ParentId="776" CreationDate="2017-04-04T15:53:30.787" Score="0" Body="&lt;h1&gt;How to install Elementary OS via network boot&lt;/h1&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Source: &lt;a href=&quot;http://www.gtkdb.de/index_7_2777.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.gtkdb.de/index_7_2777.html&lt;/a&gt;, &lt;a href=&quot;http://www.gtkdb.de/index_33_1342.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.gtkdb.de/index_33_1342.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This how-to is written for Ubuntu Server 16.04. You could use any version of Ubuntu &gt;=14.10. Run this as &lt;strong&gt;root&lt;/strong&gt;. (sudo ...)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install needed software and tools:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install nfs-kernel-server dnsmasq syslinux pxelinux&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;Download ISO from elementary.io (I don't have enough reputation to add a download-link. Sorry.)&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount iso to /mnt&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -o loop your_iso_file.iso /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a directory for your NFS-server that stores the content of the ISO-file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p /data/nfs/elementary0.4_live_amd64&#xA;cp -a /mnt/. /data/nfs/elementary0.4_live_amd64&#xA;umount /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Define the NFS-directory as exportable NFS-directory by adding this line to &lt;code&gt;/etc/exports&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/data/nfs/elementary0.4_live_amd64          192.168.196.0/24(ro)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Replace &lt;code&gt;192.168.196.0/24&lt;/code&gt;with your subnet. &lt;code&gt;(ro)&lt;/code&gt; means Read-Only.&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reload NFS service&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemctl reload nfs-server.service &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create your tftp root directory and copy the required files into it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p /tftpboot/elementary0.4_live/amd64 &#xA;cp /data/nfs/elementary0.4_live_amd64/casper/initrd.lz /data/nfs/elementary0.4_live_amd64/casper/vmlinuz.efi /tftpboot/elementary0.4_live/amd64/&#xA;mkdir /tftpboot/pxelinux.cfg/&#xA;cp /usr/lib/syslinux/modules/bios/* /tftpboot/&#xA;cp /usr/lib/PXELINUX/pxelinux.0 /tftpboot/&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Configure your PXE by creating &lt;code&gt;/etc/tftpboot/pxelinux.cfg/default&lt;/code&gt;. Add this lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default vesamenu.c32&#xA;timeout 100&#xA;prompt 0&#xA;noescape 1&#xA;&#xA;menu title PXE Boot Options&#xA;&#xA;label elementary0.4_live_amd64&#xA;  menu label Elementary OS 0.4 Loki Live AMD64&#xA;  kernel /elementary0.4_live/amd64/vmlinuz&#xA;  append nfsroot=[YOUR_IP/HOSTNAME]:/data/nfs/elementary0.4_live_amd64/ netboot=nfs ro file=/cdrom/preseed/elementary.seed boot=casper initrd=/elementary0.4_live/amd64/initrd.lz locale=de_DE bootkbd=de console-setup/layoutcode=de --&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Replace &lt;code&gt;[YOUR_IP/HOSTNAME]&lt;/code&gt; with your IP address or your domain.&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Replace &lt;code&gt;/etc/dnsmasq.conf&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;port=0&#xA;log-dhcp&#xA;&#xA;dhcp-range=192.168.178.0,proxy  # Replace the IP address with your network subnet. 192.168.178.XXX =&amp;gt; 192.168.178.0,proxy&#xA;dhcp-boot=pxelinux.0  &#xA;&#xA;pxe-service=x86PC,&quot;Network Boot&quot;,pxelinux&#xA;&#xA;enable-tftp&#xA;tftp-root=/tftpboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart dnsmasq&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;systemctl restart dnsmasq.service&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot your device and enjoy Elementary OS via Netboot. &lt;em&gt;Please up vote this answer if it works for you. (:&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9230" LastActivityDate="2017-04-04T15:53:30.787" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11398" PostTypeId="1" CreationDate="2017-04-04T18:11:20.837" Score="0" ViewCount="141" Body="&lt;p&gt;I am new to elementary OS and have basic linux knowledge. Anyway, I have gathered that packagekitd resource consumption is a known issue which is caused by unsigned PPAs. I do have them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was thinking what would be the best way to continue. Should I remove them and not use them - which will be kind of a hassle. Is there anything else I can do ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently I just kill it manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how do I exactly remove them if thats the way?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="9231" LastActivityDate="2018-08-07T12:00:44.980" Title="packagekitd workaround?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11399" PostTypeId="1" AcceptedAnswerId="11403" CreationDate="2017-04-04T20:12:24.130" Score="0" ViewCount="44" Body="&lt;p&gt;i have viewed desktop code of elementary OS &#xA;and i have some ideas for the desktop &#xA;can i modify the code and push it directly ?&#xA;or there is a procedures that i have to do it first ?   &lt;/p&gt;&#xA;" OwnerUserId="8967" LastActivityDate="2017-04-05T05:36:28.353" Title="can i push my modification directly to elementry os desktop repository ?" Tags="|release-loki|elementary-project|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11400" PostTypeId="1" AcceptedAnswerId="11654" CreationDate="2017-04-04T21:38:59.880" Score="0" ViewCount="5030" Body="&lt;p&gt;I can't seem to fix the wifi connection. Even if I restart Elementary, I still have no option about wifi connection. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can only connect to internet by using Ethernet cable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://scontent-fra3-1.xx.fbcdn.net/v/t34.0-12/17806764_1274278499360324_2081968690_n.jpg?oh=ff5998c0c84bb6ad3004482bee68956a&amp;amp;oe=58E6791F&quot; alt=&quot;a busy cat&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already installed linux-image-generic-lts-xenial, and have disabled wifi power saving, but the wifi is still not being shown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe I am not the first to have this problem, but I can't seem to find similar question in Elementary forums.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;If this helps you: When I open wifi at system settings, the tab is empty. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/vY5Pm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vY5Pm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody suggest anything else? None of the solutions provided already works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: So, no one has experienced this kind of problem before? &lt;/p&gt;&#xA;" OwnerUserId="9149" LastEditorUserId="9149" LastEditDate="2017-04-18T12:05:33.400" LastActivityDate="2019-10-27T13:21:09.273" Title="Wifi can't connect, Ethernet can" Tags="|wifi|internet|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11401" PostTypeId="2" ParentId="11400" CreationDate="2017-04-04T21:45:07.623" Score="0" Body="&lt;p&gt;It might be that your network manager needs restarted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-04T21:45:07.623" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11402" PostTypeId="1" CreationDate="2017-04-05T04:55:47.407" Score="2" ViewCount="140" Body="&lt;p&gt;How do I print (to a file) from Scratch editor as it looks (mono-scpaced and syntax highlighted)?&lt;/p&gt;&#xA;" OwnerUserId="9232" LastActivityDate="2017-04-05T04:55:47.407" Title="Print from Scratch as it looks in the editor" Tags="|release-loki|code|" AnswerCount="0" CommentCount="2" ClosedDate="2017-04-14T00:29:09.260" ContentLicense="CC BY-SA 3.0" />
  <row Id="11403" PostTypeId="2" ParentId="11399" CreationDate="2017-04-05T05:36:28.353" Score="2" Body="&lt;p&gt;If you don't know where to begin, try the &lt;a href=&quot;https://developer.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;developer guide&lt;/a&gt; they provide, it helps a lot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately developing an OS don't work this way, you have to start a issue on &lt;a href=&quot;https://code.launchpad.net/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;launchpad&lt;/a&gt; or github (depending on the project you are working on), with the reasons why this feature should be implemented. If the team is OK with your feature you can start to code it, then the code reviewed and if it's according to the coding standard, it get implemented.&lt;/p&gt;&#xA;" OwnerUserId="9233" LastActivityDate="2017-04-05T05:36:28.353" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11404" PostTypeId="2" ParentId="7680" CreationDate="2017-04-05T06:34:37.170" Score="1" Body="&lt;p&gt;type &lt;strong&gt;pkill wingpanel&lt;/strong&gt; command in terminal. it will restart the wingpanel&lt;/p&gt;&#xA;" OwnerUserId="9234" LastActivityDate="2017-04-05T06:34:37.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11405" PostTypeId="1" CreationDate="2017-04-05T11:12:36.743" Score="0" ViewCount="1051" Body="&lt;p&gt;I am kinda new to linux, so forgive me for being rather useless with linux. I am trying to configure my media PC with linux instead of windows since windows kept crashing.&#xA;Anyway, I have downloaded qBittorrent and have been trying to get it to import torrent files and download to my 8TB NAS. I have mapped the drive however qBittorrent seems to only want local drives. Hence I want to try and make linux treat them like they are local so that qBittorrent can make use of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have attached screenshots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is much welcome! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yoFUn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yoFUn.png&quot; alt=&quot;Here you can see the File Browser, I have mounted the public folder and also bookmarked the network fold &amp;quot;downloaded torrents&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JBesQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JBesQ.png&quot; alt=&quot;This is what the qBittorrent file browser looks like, my network drive does not show up&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9238" LastActivityDate="2018-01-31T12:56:42.433" Title="How can I make the OS treat a Network drive as local?" Tags="|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11406" PostTypeId="2" ParentId="11405" CreationDate="2017-04-05T11:16:11.220" Score="1" Body="&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2014/08/map-network-drive-onto-ubuntu-14-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; shows you how to do it in Ubuntu 14.04 (Elementary Loki is based on 16.04) but it should work for you. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-05T11:16:11.220" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11408" PostTypeId="2" ParentId="9166" CreationDate="2017-04-05T13:16:10.303" Score="1" Body="&lt;p&gt;You probably installed a proprietary or updated graphics driver. Use Scratch with sudo and edit the /etc/default/grub file and under the #GRUB_GFXMODE=640x480 line add:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB_GFXPAYLOAD_LINUX=auto&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will re-enable the graphics splash screen that completely covers up what's being loaded. After you quit out of Scratch, don't forget to run update-grub with sudo before rebooting.&lt;/p&gt;&#xA;" OwnerUserId="3149" LastActivityDate="2017-04-05T13:16:10.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11410" PostTypeId="1" CreationDate="2017-04-05T17:12:08.923" Score="1" ViewCount="1670" Body="&lt;p&gt;Has anyone successfully configured Elementary OS Loki for RDP or VNC?  I really like Elementary OS and would like to use it for my headless development environment and keep the desktop Pantheon Desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that I can install XFCE or Mate and VNC to it, but I'd like to use Pantheon if it is possible. I've come across various blogs, etc. that successfully remote desktop to Unity and they didn't work for me with Pantheon.  I thought maybe someone else has had some success, so thought I'd ask.&lt;/p&gt;&#xA;" OwnerUserId="9241" LastActivityDate="2019-04-24T13:56:20.650" Title="RDP or VNC to Loki" Tags="|release-loki|rdp|vnc|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-24T13:58:53.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="11411" PostTypeId="1" AcceptedAnswerId="11414" CreationDate="2017-04-05T21:09:00.993" Score="1" ViewCount="917" Body="&lt;p&gt;Is it typical that others than first user name, are not shown on the login screen(greeter)? I'm using Loki. Right now i see name near the first account only, the two next just got it's icons. But when i try to click on the icons, they do not work. I must click on the right of them, so then login name and password input box appear. I would like to see names near icons like on the first account.&lt;/p&gt;&#xA;" OwnerUserId="9246" LastActivityDate="2017-04-07T10:00:01.440" Title="Show user names on the login screen" Tags="|display|greeter|" AnswerCount="2" CommentCount="0" ClosedDate="2017-04-14T00:38:46.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="11412" PostTypeId="1" AcceptedAnswerId="11431" CreationDate="2017-04-05T22:56:06.917" Score="2" ViewCount="688" Body="&lt;p&gt;How can I change the color of the Pantheon files sidebar from dark to light? I can't seem to find the CSS that controls this aspect of it. If anyone knows where to find it please let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hlwwa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hlwwa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="578" LastEditDate="2017-04-07T06:49:37.473" LastActivityDate="2017-09-24T18:43:15.667" Title="Pantheon Files Side Panel CSS" Tags="|pantheon-files|pantheon|gtk|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11414" PostTypeId="2" ParentId="11411" CreationDate="2017-04-06T01:09:52.513" Score="0" Body="&lt;p&gt;Yes that is typical. That is the way the login screen is setup. I use the arrow keys to switch between accounts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently making a list of small things like this that need tweaked to give Elementary OS more polish. It's just the way it is for now.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-06T01:09:52.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11415" PostTypeId="1" AcceptedAnswerId="14651" CreationDate="2017-04-06T07:36:29.787" Score="1" ViewCount="706" Body="&lt;p&gt;After resuming my computer from sleep I often (but not always) see some problems with the image. Most often it's the multitasking view:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6odfa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6odfa.jpg&quot; alt=&quot;Multitasking view&quot;&gt;&lt;/a&gt;&#xA;Notice that the four corners of the screen are even whiter. They remain like that in normal view as well. So far the only way to fix this is by logging out and back in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other times I &quot;loose&quot; the wallpaper image, but I can fix this by switching to another and back to the one I want. Still less than ideal situations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few times I saw both of these happen at the same time and sometimes it just works normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what is causing this and how I can fix it? Or at least a saner workaround for the first problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently using 4.8.0-46-generic kernel from Ubuntu's hardware enablement stack, but I also experienced these with the original 4.4 kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm also using nvidia-378 driver. I saw these with older versions of the driver as well. I haven't seen the problems if I use the intel video or nouveau driver, but I also haven't used them much. Switching to one of those is not an option for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT]&#xA;I don't get this if I just switch my monitor back on from screensaver, as described in another question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also this continues to happen to me with every version of the nvidia driver. I'm currently with version 390.25.&lt;/p&gt;&#xA;" OwnerUserId="154" LastEditorUserId="154" LastEditDate="2018-02-04T08:29:52.867" LastActivityDate="2018-02-12T12:48:36.003" Title="Visual problems after resume from sleep" Tags="|release-loki|nvidia|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="11416" PostTypeId="2" ParentId="11415" CreationDate="2017-04-06T07:43:52.550" Score="3" Body="&lt;p&gt;I had the same problems and after either an eOS update or drivers update (from 3.6. to 3.7.) I managed to fix it. Try to go back to 3.75 and see if the issue persists. Would have left the comment instead of an answer, but my reputation is 29 :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit : Danke for the upvotes, now I can comment :D&lt;/p&gt;&#xA;" OwnerUserId="7537" LastEditorUserId="7537" LastEditDate="2017-04-07T16:29:44.213" LastActivityDate="2017-04-07T16:29:44.213" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11418" PostTypeId="2" ParentId="10431" CreationDate="2017-04-06T07:58:45.710" Score="1" Body="&lt;p&gt;the configuration file is at:&#xA;&lt;code&gt;/FAT32_PARTITION/boot/grub.cfg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How I found out where the files are:&lt;/strong&gt;&lt;br&gt;&#xA;By looking for the strings I see in the GRUB menu in the raw data on the USB drive, I found that the configuration files are located in a partition called &quot;usbboot&quot;, which is FAT32 (the second partition in your screenshot, which is has a different name in your case, since I had this problem with Ubuntu).&lt;/p&gt;&#xA;" OwnerUserId="9249" LastActivityDate="2017-04-06T07:58:45.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11419" PostTypeId="1" AcceptedAnswerId="11420" CreationDate="2017-04-06T09:00:56.793" Score="1" ViewCount="1726" Body="&lt;p&gt;Recently I noticed that I don't have &quot;Bluetooth&quot; tab in my System settings. When I press the Bluetooth icon in my taskbar and press &quot;Bluetooth settings...&quot; it just opens up &quot;System settings&quot; window and that's it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone having the same problem? Previously I had the tab and could easily add/remove devices but now it's just gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help already and have a nice day!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H0a0i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H0a0i.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6440" LastEditorUserId="6440" LastEditDate="2017-04-06T09:55:11.877" LastActivityDate="2018-06-03T08:57:40.220" Title="Missing &quot;Bluetooth settings&quot;" Tags="|settings|system|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11420" PostTypeId="2" ParentId="11419" CreationDate="2017-04-06T11:37:00.863" Score="3" Body="&lt;p&gt;It's a known bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try installing &#xA;'sudo apt install switchboard-plug-bluetooth' &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should add bluetooth setting to your system settings menu up to next system update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, I turn on my Bluetooth with&#xA;'bluetooth on'&#xA;Command.&#xA;Then I'm able to connect to devices from tray icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, Bluetooth right now is in a ruin and I hope so that it'll be repaired soon.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-04-06T11:37:00.863" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11421" PostTypeId="1" CreationDate="2017-04-06T12:34:29.597" Score="2" ViewCount="343" Body="&lt;p&gt;My sound stopped working after the first update came in for Elementary Loki.  The sound works fine if I boot in live mode from a jump drive.  I installed to hard drive 4/3/2017.  I've checked to make sure it's not muted in mixer.  I ran the command to make sure the sound card was recognized and it is there.  My sound card is on the mother board and is HDA Intel, Realtek ALC888.&#xA;I see several other posts but no fix.  One suggestion I saw was to add hda Intel generic to the alsa-base.conf.  That did not work for me either.&#xA;If anyone had this problem and found a fix I would greatly appreciate the info.&lt;/p&gt;&#xA;" OwnerUserId="9216" LastEditorUserId="578" LastEditDate="2017-04-06T15:17:44.663" LastActivityDate="2018-09-24T00:01:44.090" Title="Sound stopped working after update" Tags="|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11423" PostTypeId="2" ParentId="11390" CreationDate="2017-04-06T15:56:40.237" Score="2" Body="&lt;p&gt;At the time I am writing, the most current stable kernel is 4.10.8. MSI laptops with Killer Networking are reportedly working on recent Linux kernels. Their &lt;a href=&quot;http://www.killernetworking.com/driver-downloads/knowledge-base?view=topic&amp;amp;id=2&quot; rel=&quot;nofollow noreferrer&quot;&gt;support page&lt;/a&gt; says so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try updating your Linux kernel. Easiest way is probably via &lt;a href=&quot;http://www.teejeetech.in/p/ukuu-kernel-upgrade-utility.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ukuu&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it helps, I'm running elementaryOS Loki on an MSI Leopard Pro GP62M-7RD and everything works fine after updating the kernel. &lt;/p&gt;&#xA;" OwnerUserId="9254" LastActivityDate="2017-04-06T15:56:40.237" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11426" PostTypeId="1" AcceptedAnswerId="11427" CreationDate="2017-04-06T21:28:39.753" Score="1" ViewCount="4829" Body="&lt;p&gt;After attempting to update within the command line, the system ends with these errors.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done                                          &#xA;W: GPG error: https://repo.skype.com/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1F3045A5DF7587C3&#xA;E: The repository 'https://repo.skype.com/deb stable InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-06-11T08:24:03.390" Title="How do I resolve GPG NO_PUBKEY errors?" Tags="|apt|software-sources|sources|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11427" PostTypeId="2" ParentId="11426" CreationDate="2017-04-06T21:28:39.753" Score="3" Body="&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys &amp;lt;PUBKEY&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where &lt;code&gt;&amp;lt;PUBKEY&amp;gt;&lt;/code&gt; is &lt;code&gt;1F3045A5DF7587C3&lt;/code&gt; in this scenario.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-04-06T21:28:39.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11430" PostTypeId="2" ParentId="11400" CreationDate="2017-04-07T06:22:22.923" Score="0" Body="&lt;p&gt;Considering you mentioned that it worked during the Live CD/Install. I would try disabling Secure Boot via your BIOS or you could also use Mokutil to do so: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install mokutil&#xA;sudo mokutil --disable-validation&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will ask you to create a password that is at least 8 characters long. Next you will need to reboot into Ubuntu and it will ask you to confirm the password that you created. &lt;em&gt;It might ask for individual letters to be typed in instead of the entire password&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know how it goes!&lt;/p&gt;&#xA;" OwnerUserId="9261" LastActivityDate="2017-04-07T06:22:22.923" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11431" PostTypeId="2" ParentId="11412" CreationDate="2017-04-07T06:49:17.500" Score="1" Body="&lt;p&gt;In the source code file &lt;code&gt;src/View/Sidebar.vala&lt;/code&gt; (cf. &lt;code&gt;apt-get source pantheon-files&lt;/code&gt;) it seems that the &lt;code&gt;sidebar&lt;/code&gt; and &lt;code&gt;source-list&lt;/code&gt; classes are applied to the sidebar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/&lt;/code&gt; you have &quot;source-list&quot; classes defined in the files &lt;code&gt;granite-widgets.css&lt;/code&gt;, &lt;code&gt;gtk-widgets.css&lt;/code&gt; and &lt;code&gt;gtk-widgets-dark.css&lt;/code&gt;. You should customize one or more of these.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-07T06:49:17.500" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11432" PostTypeId="1" CreationDate="2017-04-07T07:05:26.270" Score="1" ViewCount="858" Body="&lt;p&gt;I'm seeking assistance as I'm trying to use a custom background picture (not the ones that come by default) but once I select the picture the background goes all black and does not show the picture, now if I log out I do see the picture I selected on the login screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a fix for this bug?&lt;/p&gt;&#xA;" OwnerUserId="9262" LastEditorUserId="84" LastEditDate="2018-05-06T18:35:25.680" LastActivityDate="2018-05-06T18:35:25.680" Title="Elementary OS Loki 0.4 - Background Image not changing (all black)" Tags="|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11433" PostTypeId="2" ParentId="11357" CreationDate="2017-04-07T07:09:24.890" Score="6" Body="&lt;p&gt;&lt;strong&gt;0.4 loki&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can download the package &lt;code&gt;apt&lt;/code&gt; &#xA;&lt;a href=&quot;http://archive.ubuntu.com/ubuntu/pool/main/a/apt/apt_1.2.15ubuntu0.2_amd64.deb&quot; rel=&quot;noreferrer&quot;&gt;http://archive.ubuntu.com/ubuntu/pool/main/a/apt/apt_1.2.15ubuntu0.2_amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and install via the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install ~/Downloads/apt_1.2.15ubuntu0.2_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-07T07:09:24.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11434" PostTypeId="1" AcceptedAnswerId="11450" CreationDate="2017-04-07T07:10:16.923" Score="1" ViewCount="1676" Body="&lt;p&gt;I'm new in Linux, I just install Elementary OS, the weird thing is the pantheon files behavior, it's using right click and drag, to drag and drop item. How I change it to left click? thank you &lt;/p&gt;&#xA;" OwnerUserId="9259" LastActivityDate="2017-04-08T11:44:14.330" Title="Drag and Drop in Pantheon Files Using Left Click?" Tags="|release-loki|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11435" PostTypeId="2" ParentId="11411" CreationDate="2017-04-07T10:00:01.440" Score="0" Body="&lt;p&gt;Thank You. So i resolved my problem by installing Webkit Greeter with command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt install lightdm-webkit-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And inside /etc/lightdm/lightdm.conf i have added &quot;greeter-session=lightdm-webkit-greeter&quot; in the section [Seat:*].&#xA;Then i installed LightDM-Webkit-MacOSX-Theme with new commits, and it looks very nice with names near every user :)&lt;/p&gt;&#xA;" OwnerUserId="9246" LastActivityDate="2017-04-07T10:00:01.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11436" PostTypeId="1" AcceptedAnswerId="11437" CreationDate="2017-04-07T11:06:45.540" Score="0" ViewCount="376" Body="&lt;p&gt;&lt;strong&gt;Setting Folder Icon?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like to set folder icons to my folders, is it possible to do that from the default file manager? or can I use nautilus scripts (or some modified version of it) to change my folder icons in bulk like explained &lt;a href=&quot;https://askubuntu.com/questions/892916/change-folder-icon-of-multiple-folders-movies/900053#900053&quot;&gt;here&lt;/a&gt;, or Will I need to get Nautilus?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dDOeg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dDOeg.png&quot; alt=&quot;Screenshot of Folder icons set directory&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Adding PPA&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read that PPA's are blocked inside elementary OS, is that still the case? if yes then is their a hack around it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Installing GTK Theme&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i'm right now using this &lt;a href=&quot;http://www.noobslab.com/2016/11/macbuntu-1610-transformation-pack-for.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;theme&lt;/a&gt;, will i be able to use this theme in elementary OS as well? and is their a Tweak tool like Unity Tweak Tool and Gnome Tweak Tool?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Enable Hibernation&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to use Hibernation many times, would i be able to do it in Elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;About Updates&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;as Ubuntu 17.04 is coming out at the and of this month, how fast Elementary OS will be updated to the New base?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Other Things&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what other things are different in Elementary OS for a fairly new Linux user who has just used Ubuntu for 6 months?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm asking these questions because I don't want to find out missing things after I'm completely soaked in elementary OS? &lt;/p&gt;&#xA;" OwnerUserId="9264" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2017-04-07T11:54:27.187" Title="I'm planning to Install Elementary OS, I just have a few Questions" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2017-04-14T00:28:50.900" ContentLicense="CC BY-SA 3.0" />
  <row Id="11437" PostTypeId="2" ParentId="11436" CreationDate="2017-04-07T11:45:51.567" Score="4" Body="&lt;p&gt;Welcome to Elementary! I can respond to a few of your questions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPAs: They are not enabled by default. This is alleviated by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common python3-software-properties python-software-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Themes: Yes themes can be installed. Keep in mind, many elementary apps have client side decorations that don't play well with 3rd party themes. But to use themes first you need to install elementary Tweaks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then create a folder called .themes in your home directory and copy the theme folder there. Use elementary Tweaks to enable the theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hibernation: Yes I believe elementary has a form of hibernation (someone correct me if I am wrong on this)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updates: There is no telling when elementary OS will shift to 17.04. Could be with the next release, Juno. But there is no information on that. elementary doesn't tend to follow regular release schedules but follow a pattern of &quot;it will release when it's ready&quot;.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-04-07T11:54:27.187" LastActivityDate="2017-04-07T11:54:27.187" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11438" PostTypeId="1" CreationDate="2017-04-07T11:51:03.173" Score="0" ViewCount="121" Body="&lt;p&gt;I managed to screw up my python by upgrading 2.7.6 to 2.7.13; now the system has 2.7.13; I managed to find out that I can add a file called &lt;code&gt;allow_downgrade&lt;/code&gt; under &lt;code&gt;etc/apt/preferences_d/&lt;/code&gt; to downgrade to the factory settings. however this doesn't help me downgrade Python to the original 2.7.6. this solution was originally for Ubuntu. I thought it should work as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can still fix the system? I can see that some deps have already been messed up because of this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="5136" LastActivityDate="2018-12-30T05:01:10.240" Title="how do I fix python version for freya?" Tags="|release-freya|python|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11439" PostTypeId="1" CreationDate="2017-04-07T11:51:45.793" Score="0" ViewCount="332" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lOw4F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lOw4F.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;I installed &lt;code&gt;chruby&lt;/code&gt;, &lt;code&gt;ruby-install&lt;/code&gt; from this &lt;a href=&quot;http://ryanbigg.com/2014/10/ubuntu-ruby-ruby-install-chruby-and-you&quot; rel=&quot;nofollow noreferrer&quot;&gt;tutorial&lt;/a&gt; and changed &lt;code&gt;.bashrc&lt;/code&gt; acording to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can use Jekyll to build websites now, but only after I run &lt;code&gt;exec $SHELL&lt;/code&gt;. Otherwise bash tells me the command is not found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now the gem and rubies folder is sitting at &lt;code&gt;/home/myname/.gem&lt;/code&gt; and &lt;code&gt;/home/myname/.rubies&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What did I do wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;.bashrc&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.bashrc: executed by bash(1) for non-login shells.&#xA;# see /usr/share/doc/bash/examples/startup-files (in the package bash-doc)&#xA;# for examples&#xA;# We use preexec and precmd hook functions for Bash&#xA;# If you have anything that's using the Debug Trap or PROMPT_COMMAND &#xA;# change it to use preexec or precmd&#xA;# See also https://github.com/rcaloras/bash-preexec&#xA;&#xA;# If not running interactively, don't do anything&#xA;case $- in&#xA;    *i*) ;;&#xA;      *) return;;&#xA;esac&#xA;&#xA;# don't put duplicate lines or lines starting with space in the history.&#xA;# See bash(1) for more options&#xA;HISTCONTROL=ignoreboth&#xA;&#xA;# append to the history file, don't overwrite it&#xA;shopt -s histappend&#xA;&#xA;# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)&#xA;HISTSIZE=1000&#xA;HISTFILESIZE=2000&#xA;&#xA;# check the window size after each command and, if necessary,&#xA;# update the values of LINES and COLUMNS.&#xA;shopt -s checkwinsize&#xA;&#xA;# If set, the pattern &quot;**&quot; used in a pathname expansion context will&#xA;# match all files and zero or more directories and subdirectories.&#xA;#shopt -s globstar&#xA;&#xA;# make less more friendly for non-text input files, see lesspipe(1)&#xA;[ -x /usr/bin/lesspipe ] &amp;amp;&amp;amp; eval &quot;$(SHELL=/bin/sh lesspipe)&quot;&#xA;&#xA;# set variable identifying the chroot you work in (used in the prompt below)&#xA;if [ -z &quot;${debian_chroot:-}&quot; ] &amp;amp;&amp;amp; [ -r /etc/debian_chroot ]; then&#xA;    debian_chroot=$(cat /etc/debian_chroot)&#xA;fi&#xA;&#xA;# set a fancy prompt (non-color, unless we know we &quot;want&quot; color)&#xA;case &quot;$TERM&quot; in&#xA;    xterm-color|*-256color) color_prompt=yes;;&#xA;esac&#xA;&#xA;# uncomment for a colored prompt, if the terminal has the capability; turned&#xA;# off by default to not distract the user: the focus in a terminal window&#xA;# should be on the output of commands, not on the prompt&#xA;#force_color_prompt=yes&#xA;&#xA;if [ -n &quot;$force_color_prompt&quot; ]; then&#xA;    if [ -x /usr/bin/tput ] &amp;amp;&amp;amp; tput setaf 1 &amp;gt;&amp;amp;/dev/null; then&#xA;    # We have color support; assume it's compliant with Ecma-48&#xA;    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such&#xA;    # a case would tend to support setf rather than setaf.)&#xA;    color_prompt=yes&#xA;    else&#xA;    color_prompt=&#xA;    fi&#xA;fi&#xA;&#xA;if [ &quot;$color_prompt&quot; = yes ]; then&#xA;    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '&#xA;else&#xA;    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '&#xA;fi&#xA;unset color_prompt force_color_prompt&#xA;&#xA;# enable color support of ls and also add handy aliases&#xA;if [ -x /usr/bin/dircolors ]; then&#xA;    test -r ~/.dircolors &amp;amp;&amp;amp; eval &quot;$(dircolors -b ~/.dircolors)&quot; || eval &quot;$(dircolors -b)&quot;&#xA;    alias ls='ls --color=auto'&#xA;    #alias dir='dir --color=auto'&#xA;    #alias vdir='vdir --color=auto'&#xA;&#xA;    alias grep='grep --color=auto'&#xA;    alias fgrep='fgrep --color=auto'&#xA;    alias egrep='egrep --color=auto'&#xA;fi&#xA;&#xA;# colored GCC warnings and errors&#xA;#export GCC_COLORS='error=01;31:warning=01;35:note=01;36:caret=01;32:locus=01:quote=01'&#xA;&#xA;# some more ls aliases&#xA;alias ll='ls -alF'&#xA;alias la='ls -A'&#xA;alias l='ls -CF'&#xA;&#xA;# Add an &quot;alert&quot; alias for long running commands.  Use like so:&#xA;#   sleep 10; alert&#xA;alias alert='notify-send --urgency=low -i &quot;$([ $? = 0 ] &amp;amp;&amp;amp; echo terminal || echo error)&quot; &quot;$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&amp;amp;|]\s*alert$//'\'')&quot;'&#xA;&#xA;# Alias definitions.&#xA;# You may want to put all your additions into a separate file like&#xA;# ~/.bash_aliases, instead of adding them here directly.&#xA;# See /usr/share/doc/bash-doc/examples in the bash-doc package.&#xA;&#xA;if [ -f ~/.bash_aliases ]; then&#xA;    . ~/.bash_aliases&#xA;fi&#xA;&#xA;# enable programmable completion features (you don't need to enable&#xA;# this, if it's already enabled in /etc/bash.bashrc and /etc/profile&#xA;# sources /etc/bash.bashrc).&#xA;if ! shopt -oq posix; then&#xA;  if [ -f /usr/share/bash-completion/bash_completion ]; then&#xA;    . /usr/share/bash-completion/bash_completion&#xA;  elif [ -f /etc/bash_completion ]; then&#xA;    . /etc/bash_completion&#xA;  fi&#xA;fi&#xA;&#xA;# If this is an xterm set more declarative titles &#xA;# &quot;dir: last_cmd&quot; and &quot;actual_cmd&quot; during execution&#xA;# If you want to exclude a cmd from being printed see line 156&#xA;case &quot;$TERM&quot; in&#xA;xterm*|rxvt*)&#xA;    PS1=&quot;\[\e]0;${debian_chroot:+($debian_chroot)}\$(print_title)\a\]$PS1&quot;&#xA;    __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;    print_title () &#xA;    {&#xA;        __el_FIRSTPART=&quot;&quot;&#xA;        __el_SECONDPART=&quot;&quot;&#xA;        if [ &quot;$PWD&quot; == &quot;$HOME&quot; ]; then&#xA;            __el_FIRSTPART=$(gettext --domain=&quot;pantheon-files&quot; &quot;Home&quot;)&#xA;        else&#xA;            if [ &quot;$PWD&quot; == &quot;/&quot; ]; then&#xA;                __el_FIRSTPART=&quot;/&quot;&#xA;            else&#xA;                __el_FIRSTPART=&quot;${PWD##*/}&quot;&#xA;            fi&#xA;        fi&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == &quot;&quot; ]]; then&#xA;            echo &quot;$__el_FIRSTPART&quot;&#xA;            return&#xA;        fi&#xA;        #trim the command to the first segment and strip sudo&#xA;        if [[ &quot;$__el_LAST_EXECUTED_COMMAND&quot; == sudo* ]]; then&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND:5}&quot;&#xA;            __el_SECONDPART=&quot;${__el_SECONDPART%% *}&quot;&#xA;        else&#xA;            __el_SECONDPART=&quot;${__el_LAST_EXECUTED_COMMAND%% *}&quot;&#xA;        fi &#xA;        printf &quot;%s: %s&quot; &quot;$__el_FIRSTPART&quot; &quot;$__el_SECONDPART&quot;&#xA;    }&#xA;    put_title()&#xA;    {&#xA;        __el_LAST_EXECUTED_COMMAND=&quot;${BASH_COMMAND}&quot;&#xA;        printf &quot;\033]0;%s\007&quot; &quot;$1&quot;&#xA;    }&#xA;&#xA;    # Show the currently running command in the terminal title:&#xA;    # http://www.davidpashley.com/articles/xterm-titles-with-bash.html&#xA;    update_tab_command()&#xA;    {&#xA;        # catch blacklisted commands and nested escapes&#xA;        case &quot;$BASH_COMMAND&quot; in &#xA;            *\033]0*|update_*|echo*|printf*|clear*|cd*)&#xA;            __el_LAST_EXECUTED_COMMAND=&quot;&quot;&#xA;                ;;&#xA;            *)&#xA;            put_title &quot;${BASH_COMMAND}&quot;&#xA;            ;;&#xA;        esac&#xA;    }&#xA;    preexec_functions+=(update_tab_command)&#xA;    ;;&#xA;*)&#xA;    ;;&#xA;esac&#xA;source /usr/local/share/chruby/chruby.sh&#xA;source /usr/local/share/chruby/auto.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;.profile&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.profile: executed by the command interpreter for login shells.&#xA;# This file is not read by bash(1), if ~/.bash_profile or ~/.bash_login&#xA;# exists.&#xA;# see /usr/share/doc/bash/examples/startup-files for examples.&#xA;# the files are located in the bash-doc package.&#xA;&#xA;# the default umask is set in /etc/profile; for setting the umask&#xA;# for ssh logins, install and configure the libpam-umask package.&#xA;#umask 022&#xA;&#xA;# if running bash&#xA;if [ -n &quot;$BASH_VERSION&quot; ]; then&#xA;    # include .bashrc if it exists&#xA;    if [ -f &quot;$HOME/.bashrc&quot; ]; then&#xA;    . &quot;$HOME/.bashrc&quot;&#xA;    fi&#xA;fi&#xA;&#xA;# set PATH so it includes user's private bin directories&#xA;PATH=&quot;$HOME/bin:$HOME/.local/bin:$PATH&quot;&#xA;PATH=&quot;$HOME/.dropbox-bin:$PATH&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There is also a &lt;a href=&quot;https://github.com/postmodern/chruby/issues/378&quot; rel=&quot;nofollow noreferrer&quot;&gt;bugreport&lt;/a&gt; that is probalby related to elementary OS. chruby can use a predefined Ruby-version, which it does not detect in elementary OS. Manually choosing a version helps. &lt;/p&gt;&#xA;" OwnerUserId="1121" LastEditorUserId="578" LastEditDate="2017-06-07T05:46:11.077" LastActivityDate="2024-04-02T23:03:55.457" Title="I need to run exec bash to accsess Jekyll or Ruby for example" Tags="|command-line|bash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11441" PostTypeId="1" CreationDate="2017-04-07T13:54:06.427" Score="1" ViewCount="41" Body="&lt;p&gt;In eOS 0.4 (Loki) the wxPython (3.0.2 gtk2 classic) wx.TaskBarIcon.IsAvailable() method returns False and of course ignoring this just results in no icon being shown. Is there a workaround for this or a plan to enable support?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have seen applications which have problems, such as Dropbox and Skype, but have been able to work around those issues.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastEditorUserId="578" LastEditDate="2017-04-07T18:40:45.377" LastActivityDate="2017-04-07T18:40:45.377" Title="wxPython TaskBarIcon fails on elementaryOS" Tags="|release-loki|development|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11442" PostTypeId="2" ParentId="11432" CreationDate="2017-04-07T13:56:20.583" Score="2" Body="&lt;p&gt;I had the same bug. I tried to change the path to my wallpaper in the config file but that didnt work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What DID work was: I copied my Wallapper in the directory where the default wallpaper is. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you copy your wallpaper to /usr/share/backgrounds you can choose your wallpaper in the settings and it should work.&lt;/p&gt;&#xA;" OwnerUserId="9267" LastActivityDate="2017-04-07T13:56:20.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11443" PostTypeId="1" CreationDate="2017-04-07T15:47:17.890" Score="0" ViewCount="1224" Body="&lt;p&gt;I have two desktop monitors that I have rotated clockwise. The systems settings feature is bugged (the &quot;Confirm&quot; button was not clickable), so I rotated them using xrandr:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xrandr --output DP1 --rotate left&#xA;$ xrandr --output VGA1 --right-of DP1 --rotate left&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, when I logout or restart, these settings get lost. Next, I decided to take the &lt;code&gt;~/config/monitors.xml&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;monitors version=&quot;1&quot;&amp;gt;&#xA;  &amp;lt;configuration&amp;gt;&#xA;    &amp;lt;clone&amp;gt;no&amp;lt;/clone&amp;gt;&#xA;    &amp;lt;output name=&quot;DP1&quot;&amp;gt;&#xA;      &amp;lt;vendor&amp;gt;HWP&amp;lt;/vendor&amp;gt;&#xA;      &amp;lt;product&amp;gt;HP ZR2440w&amp;lt;/product&amp;gt;&#xA;      &amp;lt;serial&amp;gt;CN43270JLZ&amp;lt;/serial&amp;gt;&#xA;      &amp;lt;width&amp;gt;1200&amp;lt;/width&amp;gt;&#xA;      &amp;lt;height&amp;gt;1920&amp;lt;/height&amp;gt;&#xA;      &amp;lt;rate&amp;gt;59.950172424316406&amp;lt;/rate&amp;gt;&#xA;      &amp;lt;x&amp;gt;0&amp;lt;/x&amp;gt;&#xA;      &amp;lt;y&amp;gt;3&amp;lt;/y&amp;gt;&#xA;      &amp;lt;rotation&amp;gt;left&amp;lt;/rotation&amp;gt;&#xA;      &amp;lt;reflect_x&amp;gt;no&amp;lt;/reflect_x&amp;gt;&#xA;      &amp;lt;reflect_y&amp;gt;no&amp;lt;/reflect_y&amp;gt;&#xA;      &amp;lt;primary&amp;gt;yes&amp;lt;/primary&amp;gt;&#xA;      &amp;lt;presentation&amp;gt;no&amp;lt;/presentation&amp;gt;&#xA;      &amp;lt;underscanning&amp;gt;no&amp;lt;/underscanning&amp;gt;&#xA;    &amp;lt;/output&amp;gt;&#xA;    &amp;lt;output name=&quot;VGA1&quot;&amp;gt;&#xA;      &amp;lt;vendor&amp;gt;DEL&amp;lt;/vendor&amp;gt;&#xA;      &amp;lt;product&amp;gt;DELL 2405FPW&amp;lt;/product&amp;gt;&#xA;      &amp;lt;serial&amp;gt;M675462F1E5S &amp;lt;/serial&amp;gt;&#xA;      &amp;lt;width&amp;gt;1920&amp;lt;/width&amp;gt;&#xA;      &amp;lt;height&amp;gt;1200&amp;lt;/height&amp;gt;&#xA;      &amp;lt;rate&amp;gt;59.950172424316406&amp;lt;/rate&amp;gt;&#xA;      &amp;lt;x&amp;gt;1920&amp;lt;/x&amp;gt;&#xA;      &amp;lt;y&amp;gt;0&amp;lt;/y&amp;gt;&#xA;      &amp;lt;rotation&amp;gt;left&amp;lt;/rotation&amp;gt;&#xA;      &amp;lt;reflect_x&amp;gt;no&amp;lt;/reflect_x&amp;gt;&#xA;      &amp;lt;reflect_y&amp;gt;no&amp;lt;/reflect_y&amp;gt;&#xA;      &amp;lt;primary&amp;gt;no&amp;lt;/primary&amp;gt;&#xA;      &amp;lt;presentation&amp;gt;no&amp;lt;/presentation&amp;gt;&#xA;      &amp;lt;underscanning&amp;gt;no&amp;lt;/underscanning&amp;gt;&#xA;    &amp;lt;/output&amp;gt;&#xA;  &amp;lt;/configuration&amp;gt;&#xA;&amp;lt;/monitors&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and rotated them both left. However, when I logout or restart, this too gets ignored. I read about a bug of this with Ubuntu, so I thought this might apply here: But &lt;code&gt;pkill -9 -f gnome-settings-daemon&lt;/code&gt; did not read in these settings (at least, the displays were still not rotated).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's not much to search: All results I found for Ubuntu I tried, and for elementary OS, I found not much to begin with. Here's what xrandr reports (after manually turning the displays): How should I proceed?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DP1 connected primary 1200x1920+0+0 left (normal left inverted right x axis y axis) 520mm x 320mm&#xA;   1920x1200     59.95*+&#xA;   1920x1080     60.00    50.00    59.94  &#xA;   1920x1080i    60.00    50.00    59.94  &#xA;   1600x1200     60.00  &#xA;   1680x1050     59.95  &#xA;   1680x945      60.02  &#xA;   1400x1050     59.98  &#xA;   1600x900      60.00  &#xA;   1280x1024     60.02  &#xA;   1440x900      59.89  &#xA;   1280x960      60.00  &#xA;   1366x768      59.79  &#xA;   1360x768      60.02  &#xA;   1280x800      59.81  &#xA;   1280x768      59.87  &#xA;   1280x720      60.00    50.00    59.94  &#xA;   1024x768      60.00  &#xA;   1024x576      59.97  &#xA;   800x600       60.32    56.25  &#xA;   720x576       50.00  &#xA;   848x480       60.00  &#xA;   720x480       60.00    59.94  &#xA;   640x480       60.00    59.94  &#xA;HDMI1 disconnected (normal left inverted right x axis y axis)&#xA;VGA1 connected 1200x1920+1200+0 left (normal left inverted right x axis y axis) 520mm x 330mm&#xA;   1920x1200     59.95*+&#xA;   1600x1200     60.00  &#xA;   1680x1050     59.95  &#xA;   1280x1024     75.02    60.02  &#xA;   1152x864      75.00  &#xA;   1024x768      75.08    60.00  &#xA;   800x600       75.00    60.32  &#xA;   640x480       75.00    60.00  &#xA;   720x400       70.08  &#xA;VIRTUAL1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6820" LastActivityDate="2024-03-26T23:04:55.783" Title="Monitors.xml is being ignored: Persistently change display rotation?" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11444" PostTypeId="2" ParentId="11439" CreationDate="2017-04-07T15:50:24.563" Score="0" Body="&lt;p&gt;&lt;code&gt;$SHELL&lt;/code&gt; is just an environment variable that points to the executable name of your shell. You can just replace it with &lt;code&gt;bash&lt;/code&gt;, unless you are using other shells such as &lt;code&gt;zsh&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead of just executing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exec $SHELL&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just do this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exec bash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The link you have provided also suggested that you can instead just open a new tab/window and continue from there.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-04-07T15:50:24.563" CommentCount="12" ContentLicense="CC BY-SA 3.0" />
  <row Id="11445" PostTypeId="1" CreationDate="2017-04-07T16:49:58.533" Score="1" ViewCount="52" Body="&lt;p&gt;Im traing to buy a a coffee Mug, but after I complete the Shipping information and I press &quot;Check Out&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DX9LO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DX9LO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can i do?&lt;/p&gt;&#xA;" OwnerUserId="9269" LastEditorUserId="578" LastEditDate="2017-04-07T18:48:24.420" LastActivityDate="2017-04-07T18:48:24.420" Title="Problem with the store" Tags="|elementary-website|" AnswerCount="0" CommentCount="2" ClosedDate="2017-04-14T00:26:41.017" ContentLicense="CC BY-SA 3.0" />
  <row Id="11446" PostTypeId="2" ParentId="11233" CreationDate="2017-04-07T18:47:26.407" Score="0" Body="&lt;p&gt;You might want try to compile it under Ubuntu with static linking so that granite and other libraries does not interfere with your default Ubuntu desktop experience. Source is available at &lt;a href=&quot;https://launchpad.net/scratch&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/scratch&lt;/a&gt; as Pretzel Jones pointed out in his answer.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-07T18:47:26.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11447" PostTypeId="1" AcceptedAnswerId="11457" CreationDate="2017-04-07T20:09:37.233" Score="3" ViewCount="2327" Body="&lt;p&gt;i just installed elementary os and dual booted it with my windows 10 OS. but after everything my wifi does not see networks whereas these networks show full bars in my windows os. it only shows a signle bar of wifi from my phone hotspot when my phone is right next to my pc. and disconnects often. my pc is HP 250 G4 and i have both UEFI mode and secure boot enabled. althogh i have typed all the terminal commands ive found online. still no change.&lt;/p&gt;&#xA;" OwnerUserId="9271" LastActivityDate="2019-01-15T08:21:38.837" Title="WiFi networks not showing in elementary OS loki" Tags="|release-loki|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11449" PostTypeId="2" ParentId="11438" CreationDate="2017-04-08T06:09:58.880" Score="1" Body="&lt;p&gt;If the original package is still available somewhere in your repositories, you could do that with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f python=2.7.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this, you might still have to run &lt;code&gt;sudo apt install -f&lt;/code&gt; a couple of time to get other dependencies downgraded as well.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-08T06:09:58.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11450" PostTypeId="2" ParentId="11434" CreationDate="2017-04-08T11:44:14.330" Score="0" Body="&lt;p&gt;Go to System Settings/Mouse and Touchpad.  There you can change which button is &quot;primary&quot; and which is &quot;secondary&quot;.  By default, the left button is &quot;primary&quot; and using this for drag and drop performs the default operation (copy or move) depending on the source and destination.  Using the secondary button (usually right), gives you a menu when you drop allowing a choice of Copy, Move, Link and Cancel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the behaviour is not as expected, check whether other applications are also affected.  If so it may be a hardware problem.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-04-08T11:44:14.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11451" PostTypeId="1" AcceptedAnswerId="11453" CreationDate="2017-04-08T13:15:00.750" Score="1" ViewCount="690" Body="&lt;p&gt;I am using elmentaryOS Loki.&lt;br&gt;&#xA;It takes up to 20 seconds to show desktop after I enter my password.&lt;br&gt;&#xA;Please help me out.&lt;br&gt;&#xA;&lt;strong&gt;Update&lt;/strong&gt;: I have update my Linux Kernel to 4.10 version&lt;/p&gt;&#xA;" OwnerUserId="9031" LastEditorUserId="9031" LastEditDate="2017-04-09T04:42:45.793" LastActivityDate="2017-04-09T04:42:45.793" Title="elementary OS takes up to 20 seconds to login after I enter my login password" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2018-03-11T01:59:54.530" ContentLicense="CC BY-SA 3.0" />
  <row Id="11452" PostTypeId="1" CreationDate="2017-04-08T13:55:06.320" Score="0" ViewCount="1189" Body="&lt;p&gt;I have new &lt;a href=&quot;https://www.asus.com/Notebooks/ASUS-ZenBook-UX410UA/&quot; rel=&quot;nofollow noreferrer&quot;&gt;ASUS ZenBook UX410UA&lt;/a&gt; and Microsoft Designer Bluetooth Mouse. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to pair, connect and trust Bluetooth mouse, &lt;strong&gt;but it mostly doesn't work&lt;/strong&gt;. &#xA;Sometimes mouse works only few seconds after login, sometimes few minutes. Than mouse cursor will get stuck and only sometimes helps toggle on/off Bluetooth, sometimes logout, sometimes nothing and reboot is needed. Absolutely not reliable.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;petr@UX410:~$ bluetoothctl&#xA;[NEW] Controller F4:8C:50:AC:FE:12 UX410 [default]&#xA;[NEW] Device F4:48:0D:AC:6B:6E Designer Mouse&#xA;[bluetooth]# info F4:48:0D:AC:6B:6E&#xA;Device F4:48:0D:AC:6B:6E&#xA;Name: Designer Mouse&#xA;Alias: Designer Mouse&#xA;Appearance: 0x03c2&#xA;Icon: input-mouse&#xA;Paired: yes&#xA;Trusted: yes&#xA;Blocked: no&#xA;Connected: yes&#xA;LegacyPairing: no&#xA;UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)&#xA;UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)&#xA;UUID: Device Information        (0000180a-0000-1000-8000-00805f9b34fb)&#xA;UUID: Battery Service           (0000180f-0000-1000-8000-00805f9b34fb)&#xA;UUID: Human Interface Device    (00001812-0000-1000-8000-00805f9b34fb)&#xA;[bluetooth]# version&#xA;Version 5.37&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have connected/paired thru &lt;code&gt;bluetoothctl&lt;/code&gt; utility, as Bluetooth section in &lt;em&gt;Wingpanel&lt;/em&gt; or &lt;em&gt;Switchboard Bluetooth settings&lt;/em&gt; not worked well for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lshw&lt;/code&gt; output here at &lt;a href=&quot;https://pastebin.com/uuy41GhD&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/uuy41GhD&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Any suggestions how to get this work&lt;/strong&gt;, or is this known &quot;in development&quot; stage?&#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="9263" LastEditorUserId="578" LastEditDate="2017-04-09T05:19:29.397" LastActivityDate="2017-05-30T20:11:13.180" Title="Bluetooth mouse not working even is connected, paired, trusted" Tags="|mouse|bluetooth|asus|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11453" PostTypeId="2" ParentId="11451" CreationDate="2017-04-08T18:57:50.240" Score="5" Body="&lt;p&gt;rename the file: /etc/xdg/autostart/at-spi-dbus-bus.desktop&#xA;to /etc/xdg/autostart/at-spi-dbus-bus.disabled&lt;/p&gt;&#xA;" OwnerUserId="3602" LastActivityDate="2017-04-08T18:57:50.240" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11454" PostTypeId="1" AcceptedAnswerId="11464" CreationDate="2017-04-08T19:08:50.820" Score="5" ViewCount="11792" Body="&lt;p&gt;I'm on a fresh install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At first, when I was trying to install an app from the app center it would say 'starting' with an empty loading bar that would remain empty forever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After looking up some solutions I tried running &#xA;   &lt;code&gt;sudo apt update&lt;/code&gt; and &#xA;    &lt;code&gt;sudo apt upgrade&lt;/code&gt;,&#xA;now when I try to install an app the behavior is essentially identical except it now says 'Waiting' instead of 'starting'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; the problem no longer exists for me on 0.4.1 with the new App Center.&lt;/p&gt;&#xA;" OwnerUserId="9279" LastEditorUserId="9279" LastEditDate="2017-06-13T02:55:13.223" LastActivityDate="2017-06-13T02:55:13.223" Title="App Center stuck on 'waiting'" Tags="|applications|appcenter|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11457" PostTypeId="2" ParentId="11447" CreationDate="2017-04-08T23:10:14.090" Score="3" Body="&lt;p&gt;If you have an Ethernet cable you should connect it and update your machine before continuing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo upgrade -y&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run modprobe on the wireless adapter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe -r rtl8723be&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then try one of the following to see if it works:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo modprobe rtl8723be ant_sel=1&lt;/code&gt; or &lt;code&gt;sudo modprobe rtl8723be ant_sel=2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a temporary solution. To make it permanent, once you figure out which antenna works for your machine try the following (where &lt;code&gt;X&lt;/code&gt; is the antenna that works for your laptop):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=X fwlps=N&quot; | sudo tee /etc/modprobe.d/rtl8723be.conf&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-04-08T23:10:14.090" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11462" PostTypeId="1" CreationDate="2017-04-09T16:26:41.070" Score="1" ViewCount="1085" Body="&lt;p&gt;This mis my first attempt to use Elementary OS.&#xA;I am using a GIGABYTE GB-BXBT-1900 with 8GB of memory, as well as, a 240 GB solid state hard disk. It has frozen twice within the first hour of use. Once while browsing the internet and the second while familiarizing myself with the OS. Any help will be greatly appreciated&lt;/p&gt;&#xA;" OwnerUserId="9291" LastActivityDate="2020-07-30T17:54:59.557" Title="My elementary os is freezing very often, how can I identify and solve this problem?" Tags="|release-loki|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11463" PostTypeId="2" ParentId="11454" CreationDate="2017-04-09T16:40:34.533" Score="0" Body="&lt;p&gt;open terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then reboot when it's done updating.&lt;/p&gt;&#xA;" OwnerUserId="9292" LastEditorUserId="26" LastEditDate="2017-04-14T00:25:16.677" LastActivityDate="2017-04-14T00:25:16.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11464" PostTypeId="2" ParentId="11454" CreationDate="2017-04-09T17:03:14.827" Score="3" Body="&lt;p&gt;I had the same issue yesterday. I tried the update and upgrade as you said, rebooting and nothing happened. Then I followed these steps to remove and install again the AppCenter and now it's fixed. I hope it will work for you as well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1.sudo apt-get purge appcenter&#xA;2.sudo apt-get purge packagekit&#xA;3.Restart&#xA;4.sudo apt-get install packagekit&#xA;5.sudo apt-get install appcenter&#xA;6.Restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit: You can also update manually with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;Restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In response to the comment you wrote. &lt;/p&gt;&#xA;" OwnerUserId="8749" LastEditorUserId="8749" LastEditDate="2017-04-13T10:24:02.183" LastActivityDate="2017-04-13T10:24:02.183" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="11467" PostTypeId="1" CreationDate="2017-04-09T20:25:49.427" Score="1" ViewCount="1667" Body="&lt;p&gt;I am having trouble with the suspend option. I have a laptop and I want whenever I close the lid to suspend. I changed it from the Power of the System Settings both for Plugged In and On Battery, but to no avail. I close the lid and it still is on. I tried to suspend it manually from the power button in the top right corner and it shows the same behavior as the Lock option. What can I do? Nothing I found on the web works. It's of importance to me to have the suspend option because of overheating. I should probably say that I am new in the elementary OS. Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="8749" LastActivityDate="2017-12-06T12:54:18.703" Title="Suspend option is not working in elementary OS Loki" Tags="|release-loki|suspend|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11468" PostTypeId="1" CreationDate="2017-04-09T22:45:22.957" Score="3" ViewCount="547" Body="&lt;p&gt;I have a HP x360 Spectre laptop with 2560 x 1440 resolution and a HP 22&quot; External Display with 1920 x 1080 resolution. Everything looks giant on the external display. I'm not really sure how to modify the external monitor to resolve the scaling issue. Is there a way to change scaling without going through painful calculations to make adjustments via xrandr which may or may not work? Is it setting different dpis? Any help is much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the latest elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="9297" LastEditorUserId="308" LastEditDate="2018-08-07T16:53:52.597" LastActivityDate="2019-06-21T13:02:45.467" Title="External Monitor Scaling Issue with elementary OS" Tags="|display|hidpi|mixed-dpi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11470" PostTypeId="2" ParentId="11467" CreationDate="2017-04-10T09:07:28.043" Score="1" Body="&lt;p&gt;It is probably because you are missing the swap space. Trying adding a swap partition manually. &#xA;You can check if you have a swap space using &lt;code&gt;free -m&lt;/code&gt; If total swap is 0, you need to allocate some space for swap. Usually taken 1.5x Your RAM size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a 4 Gigabyte or more (according to your RAM size) swap file by typing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo fallocate -l 4G /swapfile&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change permissions for your swap file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod 600 /swapfile&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now make swap using &lt;code&gt;sudo mkswap /swapfile&lt;/code&gt; and then &lt;b&gt;enable the swap&lt;/b&gt; partion by typing &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo swapon /swapfile&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2017-04-10T09:07:28.043" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="11471" PostTypeId="2" ParentId="9630" CreationDate="2017-04-10T09:38:53.520" Score="1" Body="&lt;p&gt;I run elementaryOS on my MacBook Air from 2013.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had similar issues, here is what i did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed macfanctld (a service that manages the Exhaustfan of the MacBook) and psensor to read live the current temps and RPM of the fan.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The cool thing is: macfantld has a config file in /etc/macfantld (when installed of course) that you can edit and when macfanctld reads its config it changes the rpm of the fan.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the link to my github, i made a little script that allows me to change the rpm of the exhaust fan to 3 settings (low - mid - high) and then a value that i want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/BookerVII/ExhaustFanSpeedControlforMacfanctld&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/BookerVII/ExhaustFanSpeedControlforMacfanctld&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;download (install) the macfantld, psensor and the script, run the script with sudo ./rpm_script.rev0.4 (low mid high or set 0-6500)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe that will help :)&lt;/p&gt;&#xA;" OwnerUserId="9267" LastActivityDate="2017-04-10T09:38:53.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11472" PostTypeId="1" AcceptedAnswerId="11474" CreationDate="2017-04-10T13:10:46.133" Score="1" ViewCount="136" Body="&lt;p&gt;I am using the latest Elementary 0.4 with Fish as my primary shell; Ctrl + Tab used to switch between the shell tabs is not working. &lt;/p&gt;&#xA;" OwnerUserId="8147" LastActivityDate="2017-04-10T14:14:40.920" Title="Ctrl + Tab not working for Loki Terminal with Fish" Tags="|pantheon-terminal|shell|fish|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11474" PostTypeId="2" ParentId="11472" CreationDate="2017-04-10T14:14:40.920" Score="2" Body="&lt;p&gt;It seems that there is no (more) &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt; hotkey, you can move with &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;1-9&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;←/→&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cf. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10045/pantheon-terminal-key-binds&quot;&gt;Pantheon-terminal key binds&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="-1" LastEditDate="2017-04-13T13:00:38.507" LastActivityDate="2017-04-10T14:14:40.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11478" PostTypeId="1" CreationDate="2017-04-10T20:05:21.727" Score="0" ViewCount="699" Body="&lt;p&gt;Is there any way to detect when a usb flash drive/stick/etc gets plugged in a usb port? To be more specific, I need to have a way to detect usb insertion/removal and use this information in a python script. I'm posting here because I am working in the elementary OS. If I'm posting in the wrong stackexchange forum feel free to move it accordingly. Thank you for your time.&lt;/p&gt;&#xA;" OwnerUserId="8749" LastEditorUserId="8749" LastEditDate="2017-04-10T20:18:44.503" LastActivityDate="2017-07-10T18:51:20.577" Title="Detecting USB Insertion/Removal" Tags="|usb-drive|usb|python|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11480" PostTypeId="2" ParentId="11478" CreationDate="2017-04-11T00:09:24.193" Score="1" Body="&lt;p&gt;In modern Linux kernels, you can use &lt;code&gt;udev&lt;/code&gt; to detect removable disks. You can read about &lt;code&gt;udev&lt;/code&gt; at:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://manpages.ubuntu.com/manpages/xenial/man7/udev.7.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Manpages&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not a Python expert, but i have find a module about using  &lt;code&gt;udev&lt;/code&gt;, so you can try with it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pyudev.readthedocs.io/en/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pure Python udev bindings&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2017-04-11T17:15:21.973" LastActivityDate="2017-04-11T17:15:21.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11482" PostTypeId="1" CreationDate="2017-04-11T05:35:04.243" Score="0" ViewCount="6734" Body="&lt;p&gt;I dont get any updates anymore. The update windows is empty.&#xA;I have also tried &quot;sudo dpkg --configure -a&quot; that have fix update problem before,with no luck...&#xA;Please help..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/16AqW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/16AqW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9313" LastActivityDate="2017-04-23T14:40:03.647" Title="Elementary os updates not working" Tags="|updates|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11484" PostTypeId="2" ParentId="11482" CreationDate="2017-04-11T06:24:13.750" Score="0" Body="&lt;p&gt;I don't know how to solve that problem but you can easily replace elementary's native &quot;app centre&quot; with some another app manangement software like &lt;strong&gt;Synaptic package manager&lt;/strong&gt;. I am using it for a while and it is far better than the app centre. You could easily install it by running these commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;sudo apt-get install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user9314" LastEditorUserId="578" LastEditDate="2017-04-23T05:44:09.710" LastActivityDate="2017-04-23T05:44:09.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11485" PostTypeId="2" ParentId="9101" CreationDate="2017-04-11T07:33:24.783" Score="3" Body="&lt;p&gt;Finally got the VPN working after finding the answer in the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugzilla.redhat.com/show_bug.cgi?id=1394977&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.redhat.com/show_bug.cgi?id=1394977&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The network manager somehow uses &lt;strong&gt;nm-applet&lt;/strong&gt; (which does not run by default) to access the VPN secrets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add nm-applet in the &lt;strong&gt;System Settings &gt; Applications &gt; Startup&lt;/strong&gt; by adding the custom command &lt;strong&gt;/usr/bin/nm-applet&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="7476" LastActivityDate="2017-04-11T07:33:24.783" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11486" PostTypeId="1" AcceptedAnswerId="11491" CreationDate="2017-04-11T08:58:43.907" Score="3" ViewCount="5706" Body="&lt;p&gt;I recently upgraded to the Loki release with a fresh install on my Thinkpad S540 without much initial problems. Today I had to use a wired connection for the first time and to much surprise the ethernet port appears to be unable to detect the cable I just plugged in (works perfectly fine in another pc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First course of action was to check whether the ethernet is recognized at all (&lt;em&gt;I translated the information headers from German to English so there might be some wonky line names&lt;/em&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sascha@sascha-ThinkPad:~$ sudo lshw -c network -sanitize&#xA;  *-network               &#xA;       Description: Ethernet interface&#xA;       Product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       Manufacturer: Realtek Semiconductor Co., Ltd.&#xA;       Physical ID: 0&#xA;       Bus-Informationen: pci@0000:03:00.0&#xA;       Logical Name: enp3s0&#xA;       Version: 10&#xA;       Serialnumber: [REMOVED] //No edit from my side here&#xA;       Size: 10Mbit/s&#xA;       Capacity: 1Gbit/s&#xA;       Width: 64 bits&#xA;       Tact: 33MHz&#xA;       Abilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-3_0.0.1 04/23/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       Ressourcen: irq:43 ioport:4000(Größe=256) memory:f0704000-f0704fff memory:f0700000-f0703fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next step I tried was going to the network settings, tried getting into the advanced settings for the ethernet connection and was greeted with the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No connection with the UUID »« could be found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After googleing a bit and learning what an UUID is I came to the conclusion it should be assigned by the network manager (&lt;em&gt;correct me if I'm wrong&lt;/em&gt;), so I tried purging and reinstalling the network manager however this did not solve the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So this is the point where I am at at the moment and my google foo doesn't seem to get me any further. I hope some of you can help me out on this one  and please let me know if you need more info.&lt;/p&gt;&#xA;" OwnerUserId="9315" LastEditorUserId="242" LastEditDate="2017-04-11T17:33:41.323" LastActivityDate="2017-04-30T19:39:52.777" Title="No ethernet connection" Tags="|release-loki|networking|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11487" PostTypeId="2" ParentId="11439" CreationDate="2017-04-11T10:24:02.337" Score="0" Body="&lt;p&gt;since i cannot see the scripts that you are working from ...&#xA;the scripts you are trying to run ...&#xA;may be bash scripts that do not have the &quot;#!/bin/bash&quot; on the first line&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try inspecting them to see if this makes sense&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-04-11T10:24:02.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11489" PostTypeId="1" AcceptedAnswerId="11719" CreationDate="2017-04-11T11:54:21.557" Score="1" ViewCount="765" Body="&lt;p&gt;I've created two wired connections&lt;br&gt;&#xA;* Wired Connection1&lt;br&gt;&#xA;* Wired Connection2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wired connection 1 is assigned a &lt;code&gt;static IP&lt;/code&gt; address.&lt;br&gt;&#xA;Wired connection 2 is set to get &lt;code&gt;Dynamic IP&lt;/code&gt; automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I connected my system to LAN network through an ethernet cable, &lt;code&gt;Wired&lt;/code&gt; is enabled (It displays connection in blue color). It has connected to Wired connection 1. But I want to switch to Wired connection 2. I don't see a way to switch these networks in Elementary OS.&lt;br&gt;&#xA;Anybody have any idea?&lt;/p&gt;&#xA;" OwnerUserId="8575" LastActivityDate="2017-10-10T12:38:45.310" Title="How to switch Wired connections in Elementary OS?" Tags="|release-loki|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11490" PostTypeId="1" AcceptedAnswerId="11504" CreationDate="2017-04-11T15:40:35.553" Score="0" ViewCount="495" Body="&lt;p&gt;I just installed Loki and the &quot;The Panel&quot; at the top of the screen disappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I've done since I install Loki and before it disappeared is run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get udpate&#xA;sudo apt-get upgrade&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and unchecked a few things that were default in the &quot;Dock.&quot; I did a little bit of exploring, even clicking on elements in &quot;The Panel&quot; to see what there was to see. I did not change any of the settings. I had Loki installed for less than 30 minutes before this happened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What did I do to cause this problem? How do I get it back?&lt;/p&gt;&#xA;" OwnerUserId="3159" LastActivityDate="2017-04-12T14:18:24.347" Title="I just installed Loki and &quot;The Panel&quot; has disappeared." Tags="|release-loki|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11491" PostTypeId="2" ParentId="11486" CreationDate="2017-04-11T17:08:07.770" Score="0" Body="&lt;p&gt;I found this guide:  &lt;a href=&quot;https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Give it a shot and see if it works :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Here is an archive of the article&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://web-beta.archive.org/web/20170410144841/https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://web-beta.archive.org/web/20170410144841/https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-04-30T19:39:52.777" LastActivityDate="2017-04-30T19:39:52.777" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11492" PostTypeId="2" ParentId="11486" CreationDate="2017-04-11T17:16:57.457" Score="1" Body="&lt;p&gt;not sure if this is the same situation ... especially since I am trying to remember exactly what happened to me ...&#xA;First thing first ... I was running ubuntu at work ... ran a software update ... then all of a sudden i didnt have any network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the network running (I need that for work) What I did was manually edit /etc/network/interfaces and configured it for my static IP address ...&#xA;it is not very complicated&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;auto eth0&lt;/li&gt;&#xA;&lt;li&gt;iface eth0 inet static&lt;/li&gt;&#xA;&lt;li&gt;address {your IP address here}&lt;/li&gt;&#xA;&lt;li&gt;gateway {your ...}&lt;/li&gt;&#xA;&lt;li&gt;netmask {your ...}&lt;/li&gt;&#xA;&lt;li&gt;dns-nameservers {your ...} {... if multiple}&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I think that was all I needed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after another software update (I think there was something &quot;funky&quot; about a Network Manager update) I was able to put it back that way it was and the network was working&#xA;the way it was/is&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;auto lo&lt;/li&gt;&#xA;&lt;li&gt;iface lo inet loopback&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;see it that helps you out or at least points you to a solution that works for you ...&lt;/p&gt;&#xA;" OwnerUserId="3581" LastEditorUserId="3581" LastEditDate="2017-04-12T02:59:39.930" LastActivityDate="2017-04-12T02:59:39.930" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11493" PostTypeId="2" ParentId="11288" CreationDate="2017-04-11T18:35:13.353" Score="0" Body="&lt;p&gt;I use a program called menulibre to hide icons. I learned you do not want to delete these .desktop files, just hide them as WingPanel will break if .desktop files are deleted.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;once installed, open up the menu editor. In the search bar on the top right search for your program. Then change the toggle to hide from menus and save. This should do it for you. &lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-04-30T18:27:15.317" LastActivityDate="2017-04-30T18:27:15.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11494" PostTypeId="2" ParentId="11065" CreationDate="2017-04-11T18:50:03.170" Score="0" Body="&lt;p&gt;I had something similar when I first installed steam. This is what worked for me. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm $HOME/.local/share/Steam/ubuntu12_32/steam-runtime/i386/lib/i386-linux-gnu/libgcc_s.so.1&#xA;&#xA;rm $HOME/.local/share/Steam/ubuntu12_32/steam-runtime/i386/usr/lib/i386-linux-gnu/libstdc++.so.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this restart Steam and it should update and fix itself. At least in my case it did.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://unix.stackexchange.com/questions/324659/how-to-install-steam-on-elementary-os-loki-64-bit&quot;&gt;https://unix.stackexchange.com/questions/324659/how-to-install-steam-on-elementary-os-loki-64-bit&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2017-04-13T12:37:15.170" LastActivityDate="2017-04-11T18:50:03.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11495" PostTypeId="2" ParentId="11490" CreationDate="2017-04-11T21:20:58.777" Score="0" Body="&lt;p&gt;Open a terminal type &lt;code&gt;wingpanel&lt;/code&gt;. This will start &lt;code&gt;wingpanel&lt;/code&gt; process and wingpanel will appear.&lt;/p&gt;&#xA;" OwnerUserId="6001" LastActivityDate="2017-04-11T21:20:58.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11496" PostTypeId="1" CreationDate="2017-04-12T03:40:00.717" Score="1" ViewCount="521" Body="&lt;p&gt;I am completely new to Elementary OS and Linux. I have tried to figure out this issue by Googling lots but cannot seem to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a slow boot, the following messages pop up and delay the boot by 90 seconds:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a start job is running for dev-mapper-cryptswap1.device&lt;/li&gt;&#xA;&lt;li&gt;a start job is running for dev-disk-by(really long number)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To install Elementary OS, I added the installation ISO to 5gb Fat32 partition. (I'm guessing that's where the second start job came from)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once I installed Elementary OS, I deleted the 5gb Fat32 partition, deleted the swap partition, that was next to it and then created a new swap partition (5gb larger).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I added the new UUID's to the &lt;code&gt;/etc/fstab&lt;/code&gt; but still get this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although, when checking the partitions in Gparted, the swap partition is 'swapon'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my /etc/fstab:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt; &amp;lt;type&amp;gt; &amp;lt;options&amp;gt; &amp;lt;dump&amp;gt; &amp;lt;pass&amp;gt;        &#xA;&#xA;UUID=7708301d-4412-4eac-bca7-0e24914097d6 none swap sw 0 0    &#xA;UUID=14A1-9401 /boot/efi vfat umask=0077 0 1    &#xA;UUID=c330fa90-5e8f-42b4-b85b-29c4353484fc / ext4 errors=remount-ro 0 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I run blkid, i get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1: UUID=&quot;7708301d-4412-4eac-bca7-0e24914097d6&quot; TYPE=&quot;swap&quot; PARTUUID=&quot;1a5ffadf-3608-42f9-b94a-211ca54f0e7b&quot;&#xA;/dev/sda2: UUID=&quot;14A1-9401&quot; TYPE=&quot;vfat&quot; PARTUUID=&quot;9643d8a5-ecd8-4f77-b27d-c1ab3e6bb8fe&quot;&#xA;/dev/sda4: UUID=&quot;c330fa90-5e8f-42b4-b85b-29c4353484fc&quot; TYPE=&quot;ext4&quot; PARTUUID=&quot;e901de58-44a0-410d-b95b-64b58c548b09&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9327" LastEditorUserId="578" LastEditDate="2017-04-12T08:14:04.553" LastActivityDate="2021-12-10T04:47:40.730" Title="Slow boot - a start job is running for" Tags="|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11497" PostTypeId="1" AcceptedAnswerId="11498" CreationDate="2017-04-12T03:51:34.313" Score="0" ViewCount="4563" Body="&lt;p&gt;so first. I've installed Android Studio and its working fine, except when I try to create AVD virtual device it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;An error occurred while creating the AVD. See idea.log for details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;i found a solution to use &#xA;    sudo apt-get install lib32stdc++6&#xA;at first it did not work it brought out&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)&#xA;E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so i decided to search for a solution and i found a few soultions from here &lt;a href=&quot;https://askubuntu.com/questions/15433/unable-to-lock-the-administration-directory-var-lib-dpkg-is-another-process&quot;&gt;Unable to lock the administration directory (/var/lib/dpkg/) is another process using it? - Ask Ubuntu&lt;/a&gt;&#xA;So i tried the command again to fix my android studio&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install lib32stdc++6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then it brought out:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; lib32stdc++6 : Depends: lib32gcc1 (&amp;gt;= 1:4.2) but it is not going to be installed&#xA;                Depends: libc6-i386 (&amp;gt;= 2.18) but it is not going to be installed&#xA; libobasis5.3-calc : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                     Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-en-us-base : Depends: libobasis5.3-en-us (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                           Depends: libobasis5.3-en-us (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-en-us-calc : Depends: libobasis5.3-en-us (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                           Depends: libobasis5.3-en-us (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-en-us-math : Depends: libobasis5.3-en-us (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                           Depends: libobasis5.3-en-us (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-en-us-res : Depends: libobasis5.3-en-us (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libobasis5.3-en-us (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-extension-javascript-script-provider : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                                                     Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-extension-mediawiki-publisher : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                                              Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-filter-data : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                            Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-gnome-integration : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                                  Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-graphicfilter : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                              Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-images : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                       Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-kde-integration : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                                Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-librelogo : Depends: libobasis5.3-writer (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libobasis5.3-writer (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-ogltrans : Depends: libobasis5.3-impress (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                         Depends: libobasis5.3-impress (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-ooofonts : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                         Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-pyuno : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                      Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libobasis5.3-xsltfilter : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                           Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-base : Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                       Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                       Depends: libobasis5.3-base (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                       Depends: libobasis5.3-base (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-calc : Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                       Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-dict-es : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                          Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-dict-fr : Depends: libobasis5.3-core (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libobasis5.3-core (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                          Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-en-us : Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                        Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                        Depends: libobasis5.3-en-us (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                        Depends: libobasis5.3-en-us (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                        Depends: libobasis5.3-en-us-writer (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                        Depends: libobasis5.3-en-us-writer (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA; libreoffice5.3-impress : Depends: libreoffice5.3 (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libreoffice5.3 (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;                          Depends: libobasis5.3-impress (&amp;gt;= 5.3.1.2) but it is not installable&#xA;                          Depends: libobasis5.3-impress (&amp;lt;= 5.3.1.2-2) but it is not installable&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried my android studio AVD again and it still brought out the same error.&#xA;I tried the command a recommended by the terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get -f install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and got:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)&#xA;E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;switched to root and tried it again and got:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  gir1.2-javascriptcoregtk-4.0 gir1.2-json-1.0 gir1.2-soup-2.4 gir1.2-webkit2-4.0 libido3-0.1-0&#xA;  switchboard-plug-gcc-bluetooth&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following packages will be REMOVED:&#xA;  libobasis5.3-calc libobasis5.3-en-us-base libobasis5.3-en-us-calc libobasis5.3-en-us-math&#xA;  libobasis5.3-en-us-res libobasis5.3-extension-javascript-script-provider&#xA;  libobasis5.3-extension-mediawiki-publisher libobasis5.3-filter-data libobasis5.3-gnome-integration&#xA;  libobasis5.3-graphicfilter libobasis5.3-images libobasis5.3-kde-integration libobasis5.3-librelogo&#xA;  libobasis5.3-ogltrans libobasis5.3-ooofonts libobasis5.3-pyuno libobasis5.3-xsltfilter&#xA;  libreoffice5.3-base libreoffice5.3-calc libreoffice5.3-dict-es libreoffice5.3-dict-fr&#xA;  libreoffice5.3-en-us libreoffice5.3-impress&#xA;0 upgraded, 0 newly installed, 23 to remove and 102 not upgraded.&#xA;23 not fully installed or removed.&#xA;E: Could not get lock /var/cache/apt/archives/lock - open (11: Resource temporarily unavailable)&#xA;E: Unable to lock directory /var/cache/apt/archives/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;tried over and over again. but no progress.&#xA;I don't know what to do right now!&lt;/p&gt;&#xA;" OwnerUserId="9271" LastEditorUserId="-1" LastEditDate="2017-04-13T12:23:04.690" LastActivityDate="2020-04-27T15:09:28.753" Title="i have a problem with Android studio AVD and apt-get" Tags="|release-loki|apt|libreoffice|android-studio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11498" PostTypeId="2" ParentId="11497" CreationDate="2017-04-12T08:16:45.657" Score="0" Body="&lt;p&gt;You still have some &lt;code&gt;dpkg&lt;/code&gt;, &lt;code&gt;apt&lt;/code&gt; or similar process running. You have to kill them first (or do simply a reboot).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If even this does not help you might have to remove the lockfile manually: &lt;code&gt;sudo rm /var/cache/apt/archives/lock&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-12T08:16:45.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11502" PostTypeId="2" ParentId="8850" CreationDate="2017-04-12T12:00:12.863" Score="0" Body="&lt;p&gt;Like Mixy said there are known issues (that I've battled as well) with OpenSource Nvidia drivers and old NVidia drivers, prior to .375. After I move to proprietary Nvidia 375 everything started to work fine. Try to install &quot;additional drivers&quot; &gt; apt update &gt; set the driver to the latest&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-04-12T12:00:12.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11503" PostTypeId="2" ParentId="11462" CreationDate="2017-04-12T12:17:29.950" Score="1" Body="&lt;p&gt;sorry for the harsh &quot;welcome&quot; from the EOS. Anyway I would suggest to watch the system log for errors close to the seconds of the freeze (yes you need to write down the exact time when system freezes). Then try to search for the error. Maybe it will be descriptive enough to understand without search.&#xA;In my case the freezing was caused by faulty open source NVidia driver.&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-04-12T12:17:29.950" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11504" PostTypeId="2" ParentId="11490" CreationDate="2017-04-12T14:18:24.347" Score="0" Body="&lt;p&gt;To the best of my knowledge what solved this problem was rebooting the computer.&lt;/p&gt;&#xA;" OwnerUserId="3159" LastActivityDate="2017-04-12T14:18:24.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11505" PostTypeId="1" CreationDate="2017-04-12T18:41:56.517" Score="2" ViewCount="1387" Body="&lt;p&gt;I am looking for a status bar network speed indicator, which exists in gnome environment. See: &lt;a href=&quot;https://extensions.gnome.org/extension/104/netspeed/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://extensions.gnome.org/extension/104/netspeed/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to get same kind of functionality in ElementaryOS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="9334" LastActivityDate="2017-04-19T22:32:25.637" Title="Gnome Shell Extension Counterpart in ElementaryOS" Tags="|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11506" PostTypeId="1" CreationDate="2017-04-12T23:09:12.213" Score="2" ViewCount="175" Body="&lt;p&gt;I'd like to remove the ssh greeter message because that messes up some protocols.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried many things, all with no avail:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;removed the motd in /etc/pam.d/sshd&lt;/li&gt;&#xA;&lt;li&gt;Banner /dev/null in /etc/ssh/sshd_config&lt;/li&gt;&#xA;&lt;li&gt;chmod -x /etc/update-motd.d/*&lt;/li&gt;&#xA;&lt;li&gt;Create empty touch ~/.hushlogin &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After all of this, it still says &lt;code&gt;elementary OS Loki&lt;/code&gt;. How can I remove that message?&lt;/p&gt;&#xA;" OwnerUserId="6820" LastActivityDate="2017-04-13T07:25:03.767" Title="Remove ssh greeter message" Tags="|ssh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11507" PostTypeId="1" AcceptedAnswerId="11512" CreationDate="2017-04-13T01:58:57.927" Score="1" ViewCount="593" Body="&lt;p&gt;When a try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to locate package elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's a fresh install of loki.   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;give me a 404 error.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:7 http://br.archive.ubuntu.com/ubuntu loki Release                                                                                                 &#xA;404  Not Found [IP: 200.236.31.4 80]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9338" LastActivityDate="2020-03-10T22:56:09.713" Title="Unable to locate elementary-sdk" Tags="|software-installation|development|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11508" PostTypeId="1" CreationDate="2017-04-13T05:14:05.200" Score="2" ViewCount="176" Body="&lt;p&gt;After installing the Nvidia proprietary drivers (the nuovo drivers had problems with flickering on the external monitor) the backlight brightness could not be set anymore (neither with keys nor with power settings).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried many hints but nothing worked.&lt;/p&gt;&#xA;" OwnerUserId="9340" LastEditorUserId="26" LastEditDate="2017-04-14T00:23:30.503" LastActivityDate="2018-09-06T15:03:25.533" Title="nvidia backlight and flickering issue Mac 2010 LOKI" Tags="|release-loki|graphics|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11509" PostTypeId="1" AcceptedAnswerId="11511" CreationDate="2017-04-13T06:50:40.063" Score="1" ViewCount="493" Body="&lt;p&gt;What kind of printing system used by elementary OS?I used Manjaro Linux on some of my computers on the local network, and Manjaro used CUPS as printing system, without GUI, configure through web-page localhost:631.I want install perfect elementary OS GUI for printers.&#xA;Sorry for bad english :)&lt;/p&gt;&#xA;" OwnerUserId="9341" LastActivityDate="2017-04-13T07:28:05.863" Title="What kind of printing system used by elementary OS?" Tags="|printer|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11510" PostTypeId="2" ParentId="11506" CreationDate="2017-04-13T07:25:03.767" Score="1" Body="&lt;p&gt;If the message messes the protocol, it is not MotD nor &lt;code&gt;Banner&lt;/code&gt;, but it is written from some of the startup scripts. You should check for &lt;code&gt;~/.bashrc&lt;/code&gt; or other scripts used by your shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consult your shell manual page to see what scripts are being used at startup, grep over the &lt;code&gt;/etc/&lt;/code&gt; where this string is written.&lt;/p&gt;&#xA;" OwnerUserId="8291" LastActivityDate="2017-04-13T07:25:03.767" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11511" PostTypeId="2" ParentId="11509" CreationDate="2017-04-13T07:28:05.863" Score="1" Body="&lt;p&gt;You have CUPS as printing system, however you have a nice GUI to configure it in the &lt;em&gt;Switchboard&lt;/em&gt; (System Settings) as well:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ePqPf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ePqPf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-13T07:28:05.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11512" PostTypeId="2" ParentId="11507" CreationDate="2017-04-13T07:31:31.193" Score="1" Body="&lt;p&gt;This is a repository error: there is no Ubuntu version &quot;loki&quot;, you should use &quot;xenial&quot; Ubuntu repositories with elementary repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/apt/sources.list.d/elementary.list&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/etc/apt/sources.list.d/patches.list&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-13T07:31:31.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11516" PostTypeId="2" ParentId="7611" CreationDate="2017-04-13T09:30:25.397" Score="4" Body="&lt;p&gt;There is no official 32 bit elementary ISO but you can get quite close to the official experience by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install &lt;a href=&quot;https://www.ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu&lt;/a&gt; 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add the elementary PPAs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install the elementary desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot and select the &lt;code&gt;Pantheon&lt;/code&gt; session at the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EfSKy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EfSKy.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9342" LastEditorUserId="9342" LastEditDate="2017-04-15T10:34:01.603" LastActivityDate="2017-04-15T10:34:01.603" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="11518" PostTypeId="1" CreationDate="2017-04-13T18:58:45.140" Score="0" ViewCount="306" Body="&lt;p&gt;The network indicator in the wingpanel has been behaving strangely lately. Every now and then it would just display the icon stating that I'm not connected to the Internet (as seen in the screenshot below), and not display any networks when I click on it. This usually happens when the computer returns from suspend/sleep mode, but not always and a reboot always fixes the problem.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/EZGyR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EZGyR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see, Skype and Dropbox are both connected and working fine and so does everything else that requires the Internet, but the indicator just doesn't show it. A restart always fixes the issue, but I'd like to fix this for good.&#xA;Any ideas? I'll appreciate any input on this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-04-14T12:43:32.157" Title="Something's up with the network indicator" Tags="|wingpanel|wifi|suspend|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11519" PostTypeId="1" AcceptedAnswerId="11532" CreationDate="2017-04-13T21:50:08.303" Score="0" ViewCount="254" Body="&lt;p&gt;I'm new and I just installed Loki. The app center wont install any application and when I run &lt;code&gt;sudo apt-get update&lt;/code&gt; this happens:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cWdIw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cWdIw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9354" LastEditorUserId="26" LastEditDate="2017-04-14T00:40:31.800" LastActivityDate="2017-04-14T11:24:35.517" Title="errors with sudo apt-get update and app center not working" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11521" PostTypeId="2" ParentId="11508" CreationDate="2017-04-14T00:21:56.907" Score="1" Body="&lt;p&gt;Instead install the &lt;code&gt;nvidiabl&lt;/code&gt; module to make &lt;code&gt;/sys/class/backlight/nvidia_backlight/&lt;/code&gt; work again.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download &lt;code&gt;nvidiabl&lt;/code&gt; from &lt;a href=&quot;https://github.com/guillaumezin/nvidiabl&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/guillaumezin/nvidiabl&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Go to folder &lt;code&gt;nvidiabl-master&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Edit &lt;code&gt;nvidiabl-module.c&lt;/code&gt; line 213 and replace &lt;code&gt;strnicmp&lt;/code&gt; to &lt;code&gt;strncasecmp&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;make &amp;amp;&amp;amp; make install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot to make buttons work again (via powersave settings it should work right away)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now you should have a module called &lt;code&gt;nvidiabl&lt;/code&gt; loaded and the brightness setting works again!&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-04-14T00:21:56.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11522" PostTypeId="1" AcceptedAnswerId="11549" CreationDate="2017-04-14T00:30:55.590" Score="0" ViewCount="1206" Body="&lt;p&gt;So small issue here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing updates the App Center doesn't display any updates see screen-shot.&lt;a href=&quot;https://i.stack.imgur.com/ausnq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ausnq.png&quot; alt=&quot;App Center Updates Tab&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run the command 'sudo apt upgrade' I get the following output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following packages have been kept back:&#xA;  appcenter appstream libmaya-calendar0 libscratchcore0 maya-calendar maya-calendar-plugin-caldav maya-calendar-plugin-google scratch-text-editor&#xA;0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run 'sudo apt update'is successful &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can also install apps via terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try install an app via App Center it just hangs saying starting it doesn't even ask for authentication.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone fix  this error themselves? It occurs on three different machine of mine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="8714" LastActivityDate="2020-05-20T17:32:04.063" Title="App Center not displaying updates, installed apps or installing any new apps" Tags="|updates|software-installation|applications|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11523" PostTypeId="1" AcceptedAnswerId="11547" CreationDate="2017-04-14T00:36:11.517" Score="2" ViewCount="814" Body="&lt;p&gt;I plan to deploy elementary OS in a medium sized network environment, and wish to change the default config of the elementary desktop for newly created users, specifically the dock items. I've figured out how to add and remove default dock items via /etc/skel, but cannot seem to set the default order of the icons as they appear to the user. No matter what config files I copy over to the new user or /etc/skel, the icons must be manually dragged and dropped into their ideal positions.&lt;/p&gt;&#xA;" OwnerUserId="9358" LastActivityDate="2017-04-14T20:20:34.490" Title="How can I change the default order of Dock icons for new users?" Tags="|plank|app-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11525" PostTypeId="2" ParentId="7761" CreationDate="2017-04-14T05:45:30.513" Score="0" Body="&lt;p&gt;I used driver directly from nvidia Homepage (after purging all nvidia* packages including nuovo). Works like a charm. Only backlight worked with nvidiabl as i discribed in an other article. What says nvidia-settings gui program? Is your system up to date? I hope it is nota specific GT 330m issue. I use geforce 9400m.&lt;/p&gt;&#xA;" OwnerUserId="9340" LastActivityDate="2017-04-14T05:45:30.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11527" PostTypeId="1" CreationDate="2017-04-14T06:46:04.177" Score="1" ViewCount="2678" Body="&lt;p&gt;Well,I am getting problems with my usb wifi adapter (output by lsusb) Bus 001 Device 003: ID 0bda:8179 Realtek Semiconductor Corp. RTL8188EUS 802.11n Wireless Network Adapter, &lt;a href=&quot;https://i.stack.imgur.com/y6y4B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y6y4B.png&quot; alt=&quot;the output, what I get from network settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an another guy having same problem... ( &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6767/usb-wifi-tl-wn725n-wn723n-not-working-problem-in-network-setting&quot;&gt;usb wifi TL-WN725N_WN723N not working + problem in network setting&lt;/a&gt;) I already installed bcom drivers without luck, waiting for a quick fix...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings.... :D&lt;/p&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="686" LastEditDate="2017-08-03T16:54:33.063" LastActivityDate="2023-04-13T10:05:15.563" Title="Can't get my usb wifi adaptor working" Tags="|wifi|usb|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="11529" PostTypeId="2" ParentId="11518" CreationDate="2017-04-14T10:27:06.727" Score="1" Body="&lt;p&gt;Try &lt;code&gt;sudo systemctl restart NetworkManager.service&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should reset the NM Service and return the correct icon.&lt;/p&gt;&#xA;" OwnerUserId="9365" LastEditorUserId="26" LastEditDate="2017-04-14T12:43:32.157" LastActivityDate="2017-04-14T12:43:32.157" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11530" PostTypeId="1" AcceptedAnswerId="11531" CreationDate="2017-04-14T10:37:36.937" Score="1" ViewCount="1019" Body="&lt;p&gt;Currently, elementary OS Loki is running Ubuntu 16.04 (or .10, amirite?) under the hood. My question is: will the guys working on elementary OS update from the former version to 17.04?&lt;/p&gt;&#xA;" OwnerUserId="9374" OwnerDisplayName="Christian Wico" LastEditorUserId="16827" LastEditDate="2019-04-13T07:13:19.477" LastActivityDate="2019-04-13T07:13:19.477" Title="elementary OS going Zesty" Tags="|system-installation|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11531" PostTypeId="2" ParentId="11530" CreationDate="2017-04-14T11:13:21.813" Score="9" Body="&lt;p&gt;No. This is because Ubuntu based distros that are not official spins like Linux Mint and elementary OS are based on the latest LTS versions. This is done because LTS releases are more throughly tested and are proved to be very stable. So the next elementaryOS version bump will occur when 18.04 LTS will be released. &lt;/p&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-04-14T11:13:21.813" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11532" PostTypeId="2" ParentId="11519" CreationDate="2017-04-14T11:24:35.517" Score="0" Body="&lt;p&gt;Okay this seems to have happen during the system installation time. Basically all your repos in &lt;strong&gt;source.list&lt;/strong&gt; have had their version code replaced from xenial (upon which elememtaryOS Loki is based) to loki. So do open your source.list file in a text editor and change all the version code in the repos from loki to xenial. For example in the screenshot, I saw &lt;code&gt;http://archive.ubuntu.com/ubuntu loki Release&lt;/code&gt; which should have been &lt;code&gt;http://archive.ubuntu.com/ubuntu xenial main&lt;/code&gt;. &#xA;Anyway I giving you my source.list of my Loki installation you can copy the repos from there.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team, and may not be under a free licence. Please satisfy yourself as to&#xA;## your rights to use the software. Also, please note that software in&#xA;## universe WILL NOT receive any review or updates from the Ubuntu security&#xA;## team.&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial universe&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial universe&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;# deb-src http://in.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;deb http://archive.canonical.com/ubuntu xenial partner&#xA;# deb-src http://archive.canonical.com/ubuntu xenial partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu xenial-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security universe&#xA;deb http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-04-14T11:24:35.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11535" PostTypeId="1" AcceptedAnswerId="11537" CreationDate="2017-04-14T13:17:24.657" Score="1" ViewCount="30" Body="&lt;p&gt;Installed Elementary OS Loki on the following configuration&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel NUC6i7KYK, 16 GB memory, Samsung 850 EVO storage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install was smooth - no issues. Completely clean install, the system had no OS before the install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;App Center: Told me I had updates but clicking on update did not work for any item. Got the message &quot;Waiting to be queued&quot;. I used apt-get after that for all new app installs and updates. Post updating all the apps now App Center freezes &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other than that it has been a smooth experience - nice light weight OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where can I file bugs?&lt;/p&gt;&#xA;" OwnerUserId="9370" LastActivityDate="2017-04-14T14:31:07.737" Title="Where does one file bugreports?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-14T14:34:39.263" ContentLicense="CC BY-SA 3.0" />
  <row Id="11537" PostTypeId="2" ParentId="11535" CreationDate="2017-04-14T14:31:07.737" Score="0" Body="&lt;p&gt;You can view and submit bug reports &lt;a href=&quot;https://bugs.launchpad.net/elementaryos&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. I recommend searching the submitted reports before submitting a new one, because your issue might already have been documented.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-14T14:31:07.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11539" PostTypeId="1" CreationDate="2017-04-14T16:18:01.823" Score="1" ViewCount="4476" Body="&lt;p&gt;Whenever i open APPCENTRE, there are no apps shown. Only the installed apps are displayed. I tried to even search for new applications, but nothing is displayed.&#xA;how can an i install Libra Office?&lt;/p&gt;&#xA;" OwnerUserId="9376" LastActivityDate="2017-11-15T07:53:35.550" Title="App Centre not showing applications other than installed apps" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11540" PostTypeId="1" AcceptedAnswerId="11588" CreationDate="2017-04-14T16:24:55.837" Score="0" ViewCount="211" Body="&lt;p&gt;I'm try to build and install Photos, but &lt;code&gt;cmake&lt;/code&gt; give me an error:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;No package 'geocode-glib-1.0' found&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Already try to install try to install &lt;code&gt;libgeocode-glib0&lt;/code&gt;.&lt;br&gt;&#xA;Then install &lt;code&gt;libgeocode-glib-dev&lt;/code&gt; and give me  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;A required package was not found&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but without package name. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;br&gt;&#xA;I'm able to create a simple vala application and run with&lt;br&gt;&#xA;&lt;code&gt;valac-0.34 --pkg geocode-glib-1.0&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9338" LastEditorUserId="9338" LastEditDate="2017-04-15T14:36:26.527" LastActivityDate="2017-04-18T21:19:05.743" Title="cmake .. not found package" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11541" PostTypeId="2" ParentId="11539" CreationDate="2017-04-14T17:16:30.333" Score="1" Body="&lt;p&gt;Open your &lt;code&gt;Terminal&lt;/code&gt; application then type:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install libreoffice&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More information: &lt;a href=&quot;https://wiki.ubuntu.com/LibreOffice&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recent updates fix the app center problem. Basically you have to do: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install packagekit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;nofollow noreferrer&quot;&gt;More info about the fix&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9338" LastEditorUserId="9338" LastEditDate="2017-04-18T21:33:06.320" LastActivityDate="2017-04-18T21:33:06.320" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11542" PostTypeId="1" CreationDate="2017-04-14T17:31:23.180" Score="1" ViewCount="201" Body="&lt;p&gt;I was tring to donate for the download but my card dosen't support the payment method other than that bitcoin is something very new to me and i don't want to pay through bitcoin. Is there any other method of donating and downloding loki???&lt;/p&gt;&#xA;" OwnerUserId="9378" LastEditorUserId="578" LastEditDate="2017-04-15T05:57:57.173" LastActivityDate="2017-04-15T05:57:57.173" Title="Are there any other payment methods?" Tags="|elementary-website|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11544" PostTypeId="2" ParentId="11542" CreationDate="2017-04-14T18:46:40.287" Score="2" Body="&lt;p&gt;You could enter &quot;0&quot; on the homepage to start the download, and then visit &#xA;&lt;a href=&quot;https://elementary.io/en/get-involved#funding&quot; rel=&quot;nofollow noreferrer&quot;&gt;Get Involved&lt;/a&gt; to find another way to contribute. On that page, you can contribute via PayPal or Patreon, or by buying something from the store. You can also contribute to elementary via &lt;a href=&quot;https://salt.bountysource.com/teams/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bountysource&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/8971/792&quot;&gt;Can I pay with PayPal to download elementary OS?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2017-04-14T18:46:40.287" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11545" PostTypeId="1" AcceptedAnswerId="11788" CreationDate="2017-04-14T18:51:47.333" Score="1" ViewCount="307" Body="&lt;p&gt;I have the keyboard layout set on spanish (I'm spanish).&#xA;In most programs I have no problems typing characters like á, ñ, è, é...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there are some programs where I try to type 'á' for example, and the ´ key doesn't work. This happens in Telegram and IntelliJ IDEA. Is this an OS problem or do I have to download a 'spanish' version of this programs?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-05-03T18:47:35.190" Title="Can't type spanish characters in some programs" Tags="|keyboard|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11546" PostTypeId="1" CreationDate="2017-04-14T18:57:55.253" Score="1" ViewCount="498" Body="&lt;p&gt;So I want to find out if it is possible to install elementary with apps from the app center and customize the settings and create a installer and use this custom installer on clients computers to save time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What are the legal issues of doing this all core files would be the same it is just adding programs and updates to the distro?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also which program does elementary os recommend for doing this as I know a few. &lt;/p&gt;&#xA;" OwnerUserId="8714" LastActivityDate="2019-08-25T20:01:20.167" Title="Custom elementary os iso for clients" Tags="|system-installation|boot|software-installation|iso|" AnswerCount="2" CommentCount="0" ClosedDate="2019-08-26T16:19:45.970" ContentLicense="CC BY-SA 3.0" />
  <row Id="11547" PostTypeId="2" ParentId="11523" CreationDate="2017-04-14T20:20:34.490" Score="3" Body="&lt;p&gt;The dock (Plank) uses &lt;code&gt;dconf&lt;/code&gt; to store its settings. You can find the items in the &lt;code&gt;net.launchpad.plank.docks&lt;/code&gt; domain. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install &lt;code&gt;debconf-editor&lt;/code&gt; to play around with things, and you can use the &lt;code&gt;gsettings&lt;/code&gt; command-line tool to automate this. &lt;/p&gt;&#xA;" OwnerUserId="4186" LastActivityDate="2017-04-14T20:20:34.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11549" PostTypeId="2" ParentId="11522" CreationDate="2017-04-14T23:22:00.007" Score="0" Body="&lt;p&gt;I had this problem too with a new installation on an older Dell laptop. Once I used apt to 'update' and 'upgrade' and rebooted the AppCentre had everything in the right place (when looking at &quot;Upgrade&quot;) and my issues of installations being stuck on 'started' was fixed as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and start with: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once that's done do this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then reboot&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo init 6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;After the reboot go back into AppCenter and check the Updates. Also try to install an application. It should work now.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="9382" LastActivityDate="2017-04-14T23:22:00.007" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11551" PostTypeId="1" CreationDate="2017-04-15T11:36:55.900" Score="0" ViewCount="543" Body="&lt;p&gt;I just installed elementary on my HP Pavilion, dual boot with the pre-installed Windows 10. I can't install anything, using either the app center or apt-get.&#xA;Here's what is happening when I try to install firefox&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;anthony@anthony-HP-Pavilion-Notebook:~$ sudo apt-get install firefox&#xA;[sudo] password for anthony: &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package firefox is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;E: Package 'firefox' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And when I use the app-center, it simply does nothing.&#xA;Thank you in advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="9127" LastEditorUserId="7532" LastEditDate="2017-04-17T14:06:16.737" LastActivityDate="2018-02-11T19:38:20.390" Title="Unable to install any softwares" Tags="|software-installation|appcenter|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11552" PostTypeId="2" ParentId="7916" CreationDate="2017-04-15T12:41:57.623" Score="0" Body="&lt;p&gt;Hi I am using eOS Loki too and I updated nodejs too, these are my simple steps that you can follow :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash -&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt-get install nodejs&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You can check version of your nodejs with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;node -v&#xA;&#xA;v6.10.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6069" LastEditorUserId="7532" LastEditDate="2017-04-17T04:41:21.300" LastActivityDate="2017-04-17T04:41:21.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11554" PostTypeId="2" ParentId="11313" CreationDate="2017-04-15T14:43:01.723" Score="1" Body="&lt;p&gt;Menulibre is great when it comes to change desktop icon, but doesn't work every time and sometimes application still has no icon when it's searched from search bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to fix these icons with cutting .desktop file from &lt;code&gt;/usr/share/applications&lt;/code&gt; to another folder; log out; log in; and paste file again into applications folder. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-04-15T14:43:01.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11555" PostTypeId="2" ParentId="11551" CreationDate="2017-04-15T14:50:19.123" Score="1" Body="&lt;p&gt;It's possible that you don't have the multiverse repository enabled that allows for installation of licensed software.&#xA;Run &lt;code&gt;sudo nano /etc/apt/sources.list&lt;/code&gt; and uncomment (remove #) from lines that don't match this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;deb http://archive.canonical.com/ubuntu xenial partner&#xA;# deb-src http://archive.canonical.com/ubuntu xenial partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu xenial-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security universe&#xA;deb http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this helps :).&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-04-15T14:50:19.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11557" PostTypeId="2" ParentId="11299" CreationDate="2017-04-15T17:47:42.293" Score="1" Body="&lt;p&gt;The elementary team has issued instructions on how to fix this (see &lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/important-update-released-501c9d9f28b&lt;/a&gt;). Apparently there was a mismatch between AppCenter and packagekit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install packagekit&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8087" LastActivityDate="2017-04-15T17:47:42.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11558" PostTypeId="1" CreationDate="2017-04-15T18:39:06.267" Score="0" ViewCount="803" Body="&lt;p&gt;I am using Loki on my Lenovo X1 Yoga. Very recently an update has enabled the accelerometer, so the screen automatically rotates with the laptop. However, there are two big problems:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;The orientation of the screen is wrong. I don't know how to either disable it, or to correct it. Running &lt;code&gt;xrandr --output eDP1 --rotate normal&lt;/code&gt; temporarily restores the correct orientation, but moving the laptop results in the incorrect orientation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The accelerometer detection only does anything once the laptop has been to sleep, and has resumed. Upon first booting, my system works fine &lt;em&gt;without the rotation&lt;/em&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Any ideas how to deal with this would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="9390" LastActivityDate="2020-11-02T15:49:18.120" Title="Update enables accelerometer with wrong screen orientation" Tags="|release-loki|display|suspend|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11560" PostTypeId="2" ParentId="8192" CreationDate="2017-04-15T22:47:03.573" Score="8" Body="&lt;p&gt;A fix for this specific issue has just been released in the form of a new &lt;code&gt;packagekit&lt;/code&gt; version. If this is not applied automatically, you can do it with the following two commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install packagekit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Detailed instructions can be located at &#xA;&lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;noreferrer&quot;&gt;https://medium.com/elementaryos/important-update-released-501c9d9f28b&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-04-15T22:47:03.573" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11563" PostTypeId="1" AcceptedAnswerId="11572" CreationDate="2017-04-16T17:12:42.960" Score="1" ViewCount="144" Body="&lt;p&gt;I installed Jetbrains' Gogland and tried it out. In the end I decided against it and wanted to uninstall it. The thing is that I did not install it with apt-get, but I just downloaded a .tar.gz file from their website. I had to run a .sh file to start it and then install it. In order to uninstall it I just removed the folder where all the files were saved. Is there something else I need to do ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the following command to check if there are any other files on the pc, but did not find anything :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo find .  -name &quot;*gogland*&quot; -print&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7537" LastEditorUserId="578" LastEditDate="2017-04-18T15:30:08.800" LastActivityDate="2017-04-18T15:30:08.800" Title="Uninstalling a &quot;non-package-manager application&quot;" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11566" PostTypeId="1" AcceptedAnswerId="11624" CreationDate="2017-04-16T19:01:45.870" Score="0" ViewCount="2847" Body="&lt;p&gt;Sometimes, after a few hours of use, elementary freezes and I have to shut it down by hold the power button. This is happening to me since I upgraded from Freya (didn't happen) to Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is Asus-X550&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i5-3337U&lt;/li&gt;&#xA;&lt;li&gt;Nvidia Geforce 720m&lt;/li&gt;&#xA;&lt;li&gt;8 GB of RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Normally, when it freezes I have Chrome a bunch of tabs opened in Chrome and Intellij IDEA opened, a few hours have passed and I try to open other program, heavy or not. Maybe I need more RAM? But I think that 8 GB is enough to handle that...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also Windows 10 installed and no problems on it, so we can discard a hardware problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions? &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Okay, so I reinstalled Loki and happened again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/5eYH0Yky&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/5eYH0Yky&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The /var/log/syslog file after the system logged out itself (after waiting  3 or 4 minutes waiting without control of the mouse nor keyboard and without effect pressing Ctrl+Alt+F1) and logged in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before starting to freeze, I launched Eclipse and only one tab in Chrome was opened at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I had the top command running and there was nothing strange at the beginning of freezing, java (Eclipse) was taking about 0,7 % of RAM and was the most RAM consuming process. But after waiting those 3 minutes the XOrg service began to take more and more RAM, taking all of it until it logged out (Which is an outrage thing, given that I have 8 GB of RAM and was being used just before freezing about 2% of it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what is happening and how could I fix it?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="2943" LastEditDate="2017-04-17T18:59:51.647" LastActivityDate="2017-04-20T06:37:29.130" Title="Elementary OS is freezing after some time of use" Tags="|release-loki|system|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11567" PostTypeId="1" AcceptedAnswerId="11570" CreationDate="2017-04-16T20:04:23.280" Score="1" ViewCount="656" Body="&lt;p&gt;I am using 16.04 base(loki) and the file manager doesn't show buttons to select/save/upload files. For instance - &#xA;&lt;BR&gt;Example 1. when I start writing a new text file and then save it using Ctrl+S I am unable to select a name for it as there should be on top bar of file manager.&#xA;&lt;BR&gt;  Example 2. When I try to select a file in an application there's no open button it just shows list of files without any button to select a particular file. Some fm support double click to select a file, even that doesn't work here &lt;br&gt;&#xA;see the screenshots&lt;a href=&quot;https://i.stack.imgur.com/Y14XC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y14XC.png&quot; alt=&quot;When saving a file&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8574" LastActivityDate="2017-06-16T13:07:59.200" Title="Unable to select files from file manager in eos whe uploading,saving, or opening a file" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11569" PostTypeId="1" CreationDate="2017-04-17T10:02:06.690" Score="0" ViewCount="373" Body="&lt;p&gt;Occasionally my son hits the keyboard and presses Caps Lock while the computer is locked. When I try to login I cannot. I try to turn off the Caps Lock but it's not working, the light indicator on the button is always turned on. I'm not sure if it matters but I am using Apple Aluminium Keyboard. The only solution to login is to restart the computer.&lt;br&gt;&#xA;I am not really sure how I can debug this issue, but when I Ctrl+Alt+1 I see that the Caps Lock is not turned on when trying to type my username.&lt;/p&gt;&#xA;" OwnerUserId="369" LastActivityDate="2019-08-26T04:04:35.443" Title="Cannot turn off Caps Lock on lock screen" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11570" PostTypeId="2" ParentId="11567" CreationDate="2017-04-17T11:25:10.910" Score="1" Body="&lt;p&gt;This sounds similar to the previously reported bug 1506069 on launchpad (&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1506069&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1506069&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does &lt;a href=&quot;http://elementaryos.stackexchange.com/questions/1638/buttons-are-missing-in-the-file-chooser-dialog-what-should-i-do&quot;&gt;http://elementaryos.stackexchange.com/questions/1638/buttons-are-missing-in-the-file-chooser-dialog-what-should-i-do&lt;/a&gt; solve your problem?&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-04-17T11:25:10.910" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11571" PostTypeId="2" ParentId="9741" CreationDate="2017-04-17T11:30:28.940" Score="0" Body="&lt;p&gt;Your issue might be related to what many of us experienced recently. The elementary team pushed out a fix that might be what you're looking for. Apparently there was an issue with the PackageKit library. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/important-update-released-501c9d9f28b&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the terminal...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;sudo apt install packagekit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-17T11:30:28.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11572" PostTypeId="2" ParentId="11563" CreationDate="2017-04-17T12:28:00.143" Score="2" Body="&lt;p&gt;This is an example of a &quot;non-package-manager application&quot;, which can be difficult to uninstall completely. It depends on whether the application creates files outside its initial directory, and if so, whether they are easily found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A &quot;non-package-manager application&quot; is typically installed by:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;downloading it to a user folder&lt;/li&gt;&#xA;&lt;li&gt;navigating to the folder and running an executable&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the executable may simply &lt;strong&gt;run&lt;/strong&gt; the application from its current location (as is the case for Gogland), or it may &lt;strong&gt;install&lt;/strong&gt; the application by copying it to another directory&lt;/li&gt;&#xA;&lt;li&gt;one may run the executable as a &lt;strong&gt;user&lt;/strong&gt; (as is the case for Gogland) or as &lt;strong&gt;root&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I took a quick look at Gogland. From what I saw, the executable only runs the application, without installing it anywhere else; thus, &quot;uninstalling&quot; Gogland is achieved by simply removing its directory....unless you also want to remove any generated supplementary files (configuration files, cache files, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find them, the first step would be to check whether they are declared in the official documentation. Gogland seems to have done this in the &quot;Installation Instructions&quot; file, which cites &lt;code&gt;~/.Gogland1.0&lt;/code&gt; as the configuration/cache directory. Deleting this folder completes the removal of Gogland files from your system.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;inotify&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;In the absence of documentation, one could try using &lt;code&gt;inotify&lt;/code&gt;, which monitors file system events. By setting &lt;code&gt;inotify&lt;/code&gt; to monitor the user's entire home directory tree, then running Gogland, one can watch its management of supplementary files. (Monitoring can be restricted to the home directory since Gogland is run as a user, and therefore cannot modify files outside &lt;code&gt;~&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried running &lt;code&gt;inotifywait -mr -e create,modify ~&lt;/code&gt;. This command recursively (&lt;code&gt;-r&lt;/code&gt;) monitors directory &lt;code&gt;~&lt;/code&gt; for any file creation or modification events (&lt;code&gt;-e create,modify&lt;/code&gt;). Monitoring is continuous (&lt;code&gt;-m&lt;/code&gt;), as opposed to the default behaviour of monitoring only until the first event is detected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then launched Gogland. From my quick test, it appears that &lt;code&gt;~/.Gogland1.0&lt;/code&gt; is indeed the application's only supplementary file location.&lt;/p&gt;&#xA;" OwnerDisplayName="user9405" LastActivityDate="2017-04-17T12:28:00.143" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11573" PostTypeId="1" AcceptedAnswerId="11583" CreationDate="2017-04-17T16:03:49.597" Score="2" ViewCount="247" Body="&lt;p&gt;Is there a way to customize my &lt;em&gt;taskbar&lt;/em&gt;? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want to see the date, I want to have the clock on the right side, instead of the middle, etc ... Mostly reorganizing, adding and removing stuff.&lt;/p&gt;&#xA;" OwnerUserId="9401" LastEditorUserId="45" LastEditDate="2017-04-17T22:36:57.530" LastActivityDate="2017-06-06T23:19:32.663" Title="Is it possible to re-arrange the indicators in the panel?" Tags="|settings|wingpanel|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11574" PostTypeId="1" CreationDate="2017-04-17T16:27:16.800" Score="0" ViewCount="249" Body="&lt;p&gt;I have recently installed Loki on Dell Inspiron 7560 (i7) laptop with 8 GB of RAM and 4 GB of Swap.&#xA;The system works fine for most of the time but when waking up after sleep and plugging in/out makes the system abruptly going out of power and shutting down. I have a dual boot system with windows and this problem is not there when I work boot windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have checked a lot of solutions. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I have gone to my BIOS power management where I enabled optimized for charging option.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have Swap space (4GB)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I had installed &lt;code&gt;tlp&lt;/code&gt;, but uninstalled it, thinking it might be interfering with the drivers.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have latest NVIDIA proprietary software (381.09) installed on my system, but my primary graphics card is Intel only.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to solve this issue? Is it a manufacturing/hardware issue?&lt;/p&gt;&#xA;" OwnerUserId="3898" LastActivityDate="2019-12-11T01:01:20.123" Title="System shuts down abruptly after waking up" Tags="|suspend|shutdown|power|" AnswerCount="1" CommentCount="1" ClosedDate="2019-12-11T12:04:18.590" ContentLicense="CC BY-SA 3.0" />
  <row Id="11576" PostTypeId="1" CreationDate="2017-04-17T17:28:46.900" Score="0" ViewCount="1391" Body="&lt;p&gt;Title says it all. I installed some updates yesterday (hadn't updated in around ~6 months) to my Freya (don't laugh) system. Today, whenever I enter my password and press enter, a black screen flashes, and I get sent back to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I enter a terminal and run &lt;code&gt;cat ~/.xsession-errors&lt;/code&gt;, I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Script for ibus started at run_im.&#xA;Script for auto started at run_im.&#xA;Script for default started at run_im.&#xA;Script for ibus started at run_im.&#xA;Script for auto started at run_im.&#xA;Script for default started at run_im.&#xA;gnome-session[4898]: WARNING: Error while executing session-migration: Failed to execute child process &quot;session-migration&quot; (No such file or directory)&#xA;gnome-session[4898]: WARNING: Could not parse desktop file remmina-applet.desktop or it references a not found TryExec binary&#xA;gnome-session[4898]: WARNING: Could not parse desktop file nylas-mail.desktop or it references a not found TryExec binary&#xA;gnome-session[4898]: WARNING: Could not parse desktop file user-dirs-update-gtk-pantheon.desktop or it references a not found TryExec binary&#xA;gnome-session[4898]: WARNING: Could not parse desktop file parcellite-startup.desktop or it references a not found TryExec binary&#xA;gnome-session[4898]: WARNING: Could not parse desktop file user-dirs-update-gtk.desktop or it references a not found TryExec binary&#xA;gnome-session[4898]: WARNING: Could not parse desktop file clipit-startup.desktop or it references a not found TryExec binary&#xA;&#xA;(gnome-settings-daemon:5043): media-keys-plugin-WARNING **: Grab failed for some keys, another application may already have access the them.&#xA;&#xA;(gala:5096): GLib-CRITICAL **: g_strsplit: assertion 'string != NULL' failed&#xA;gnome-session[4898]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;&#xA;(gala:5115): GLib-CRITICAL **: g_strsplit: assertion 'string != NULL' failed&#xA;gnome-session[4898]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;gnome-session[4898]: WARNING: App 'gala.desktop' respawning too quickly&#xA;gnome-session[4898]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;&#xA;(gnome-settings-daemon:5043): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have &lt;em&gt;no&lt;/em&gt; clue what's going on  Help!!&lt;/p&gt;&#xA;" OwnerUserId="5208" LastActivityDate="2018-02-27T01:56:37.217" Title="Infinite loop on login screen" Tags="|release-freya|greeter|" AnswerCount="2" CommentCount="1" ClosedDate="2018-03-11T02:01:06.830" ContentLicense="CC BY-SA 3.0" />
  <row Id="11577" PostTypeId="2" ParentId="8192" CreationDate="2017-04-17T17:42:47.350" Score="-1" Body="&lt;p&gt;In my case, the app center stopped to work (updates and new install) after removing some apps that I didn't want anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did to back it work again is to install all packages required to build the appcenter. Just follow the list on the git repository (&lt;a href=&quot;https://github.com/elementary/appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install intltool libappstream-dev libgee-0.8-dev libgranite-dev libgtk-3-dev libjson-glib-dev libpackagekit-glib2-dev libsoup2.4-dev libunity-dev libxml2-dev libxml2-utils valac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2017-04-17T17:42:47.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11578" PostTypeId="2" ParentId="11576" CreationDate="2017-04-17T17:44:54.400" Score="0" Body="&lt;p&gt;Well, that was easier than I thought...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just did Ctrl+F1 -&gt; logged in -&gt; &lt;code&gt;sudo chown ryan:ryan .Xauthority&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5208" LastActivityDate="2017-04-17T17:44:54.400" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11580" PostTypeId="1" CreationDate="2017-04-17T19:52:58.160" Score="2" ViewCount="1549" Body="&lt;p&gt;I have tried several things but it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="9414" LastEditorUserId="26" LastEditDate="2017-04-18T03:01:11.680" LastActivityDate="2017-07-17T04:47:52.740" Title="How can I use my Wi-Fi (Broadcom BCM43142)?" Tags="|networking|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11582" PostTypeId="2" ParentId="7006" CreationDate="2017-04-17T20:52:56.020" Score="1" Body="&lt;p&gt;There is no option in Elementary for that, but you can use a 3rd party program such as nitrogen.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nitrogen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9401" LastActivityDate="2017-04-17T20:52:56.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11583" PostTypeId="2" ParentId="11573" CreationDate="2017-04-17T22:36:34.897" Score="3" Body="&lt;p&gt;It's not possible to re-arrange the indicators in the panel.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-04-17T22:36:34.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11586" PostTypeId="2" ParentId="11580" CreationDate="2017-04-18T03:05:53.017" Score="2" Body="&lt;p&gt;It seems that the Broadcom BCM43142 has some problems with the Ubuntu 16.04 base kernel that elementary OS Loki uses. There are two solutions for this.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 1. Install the Kernel built specifically for your Wi-Fi Module&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Run the following two commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Option 2. Blacklist the offending items manually.&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Edit the blacklist file with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then append the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blacklist b43&#xA;blacklist bcma&#xA;blacklist ssb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-04-18T03:05:53.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11588" PostTypeId="2" ParentId="11540" CreationDate="2017-04-18T03:58:43.103" Score="0" Body="&lt;p&gt;After a few hours trying and learning cmake basics I found it that a lot of packages searched by &lt;code&gt;pkg_check_modules&lt;/code&gt; needs -dev dependencies. So I manually installed all missing dev packages. &lt;/p&gt;&#xA;" OwnerUserId="9338" LastEditorUserId="9338" LastEditDate="2017-04-18T21:19:05.743" LastActivityDate="2017-04-18T21:19:05.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11589" PostTypeId="2" ParentId="11000" CreationDate="2017-04-18T06:37:29.613" Score="1" Body="&lt;p&gt;So for anyone else who may be experiencing this issue: The lack of HDMI audio is documented on Ubuntu's &lt;a href=&quot;https://help.ubuntu.com/community/AMDGPU-Driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;AMDGPU and AMDGPU-Pro wiki pages&lt;/a&gt;. As of Ubuntu 16.04, only the open source AMDGPU/amdgpu-Pro official open-source Radeon drivers can be used on newer model GPU's and APU's(like mine), it specifically notes: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;The open source AMDGPU driver does not support (for now) the HDMI audio. To solve this problem, you can install che &quot;hybrid&quot; AMDGPU-Pro driver from AMD.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The &quot;pro&quot; version includes SOME(as little as possible) proprietary blobs, HDMI is a proprietary, licensed technology, so this is probably included as one of these proprietary blobs.&lt;/p&gt;&#xA;" OwnerUserId="4739" LastActivityDate="2017-04-18T06:37:29.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11592" PostTypeId="1" CreationDate="2017-04-18T07:47:12.170" Score="0" ViewCount="406" Body="&lt;p&gt;Why is the cpu(celeron g1840) usage 50% and more (not reported as a system process) because of network activity to keeton.canonical.com, ftp.bit.nl and others?(os is loki)&#xA;I tracked it down up to:&#xA;32411 _apt     /usr/lib/apt/methods/http enp2s0     0.572  20.516 KB/sec&#xA;31916 _apt     /usr/lib/apt/methods/http enp2s0     0.547  20.490 KB/sec&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It´s probably some update stuff, but the problem is it never seems to stop and using way too much cpu power, temp goes up as well.&#xA;I would have to change os if the bug can not be fixed, a dissapointment.&lt;/p&gt;&#xA;" OwnerUserId="9426" LastEditorUserId="9426" LastEditDate="2017-04-18T14:30:26.267" LastActivityDate="2024-03-15T20:07:50.893" Title="Cpu usage 50% because of network activity" Tags="|networking|cpu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11593" PostTypeId="1" CreationDate="2017-04-18T08:54:08.973" Score="1" ViewCount="349" Body="&lt;p&gt;Since today, my bluetooth is no more detected by elementaryOS.&#xA;I don't know why.&#xA;Yesterday it was working.&#xA;Windows works well (dual boot).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I can't find my bluetooth device.&#xA;I have the Xiaomi Notebook 12.5.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;COMMAND : sudo rfkill list&#xA;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&#xA;COMMAND : hciconfig hci0&#xA;hci0:   Type: BR/EDR  Bus: USB&#xA;    BD Address: 00:00:00:00:00:00  ACL MTU: 0:0  SCO MTU: 0:0&#xA;    DOWN &#xA;    RX bytes:0 acl:0 sco:0 events:0 errors:0&#xA;    TX bytes:6 acl:0 sco:0 commands:2 errors:0&#xA;&#xA;COMMAND :  dmesg | grep -i blue&#xA;[    5.331592] Bluetooth: Core ver 2.21&#xA;[    5.331610] Bluetooth: HCI device and connection manager initialized&#xA;[    5.331614] Bluetooth: HCI socket layer initialized&#xA;[    5.331618] Bluetooth: L2CAP socket layer initialized&#xA;[    5.331624] Bluetooth: SCO socket layer initialized&#xA;[    5.346236] Bluetooth: HCI UART driver ver 2.3&#xA;[    5.346242] Bluetooth: HCI UART protocol H4 registered&#xA;[    5.346244] Bluetooth: HCI UART protocol BCSP registered&#xA;[    5.346245] Bluetooth: HCI UART protocol LL registered&#xA;[    5.346249] Bluetooth: HCI UART protocol ATH3K registered&#xA;[    5.346250] Bluetooth: HCI UART protocol Three-wire (H5) registered&#xA;[    5.346286] Bluetooth: HCI UART protocol Intel registered&#xA;[    5.346308] Bluetooth: HCI UART protocol BCM registered&#xA;[    5.346309] Bluetooth: HCI UART protocol QCA registered&#xA;[    7.400010] Bluetooth: hci0 command 0xfc05 tx timeout&#xA;[    7.431431] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    7.431435] Bluetooth: BNEP filters: protocol multicast&#xA;[    7.431440] Bluetooth: BNEP socket layer initialized&#xA;[   15.396818] Bluetooth: hci0: Reading Intel version information failed (-110)&#xA;[   17.400750] Bluetooth: hci0 command 0xfc05 tx timeout&#xA;[   25.397236] Bluetooth: hci0: Reading Intel version information failed (-110)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can you help me please ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="7285" LastEditorUserId="7285" LastEditDate="2017-04-18T09:13:16.033" LastActivityDate="2017-10-07T13:41:56.010" Title="Bluetooth device no more detected" Tags="|release-loki|bluetooth|intel|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11594" PostTypeId="2" ParentId="10677" CreationDate="2017-04-18T09:23:01.767" Score="0" Body="&lt;p&gt;I have the same problem my cpu(celeron g1840) has usage 50% and more (not reported as a system process) because of network activity to sites like keeton.canonical.com, ftp.bit.nl and others.&#xA;This is what's happening:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Active Internet connections (w/o servers)&#xA;Proto Recv-Q Send-Q Local Address           Foreign Address         State      &#xA;tcp        0      0 192.168.178.18:44458    ams15s30-in-f14.1e:http TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:36860    haetae.canonical.c:http TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:56900    stackoverflow.com:https ESTABLISHED&#xA;tcp        0      0 192.168.178.18:44448    ams15s30-in-f14.1e:http TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:39302    ftp.bit.nl:http         TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:55386    keeton.canonical.c:http TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:36874    haetae.canonical.c:http TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:39326    ftp.bit.nl:http         TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:39300    ftp.bit.nl:http         TIME_WAIT  &#xA;tcp        0      0 192.168.178.18:44582    ams15s30-in-f14.1e:http TIME_WAIT....&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Active UNIX domain sockets (w/o servers)&#xA;Proto RefCnt Flags       Type       State         I-Node   Path&#xA;unix  2      [ ]         DGRAM                    16324    /run/user/1000/systemd/notify&#xA;unix  7      [ ]         DGRAM                    9851     /run/systemd/journal/socket&#xA;unix  18     [ ]         DGRAM                    9858     /run/systemd/journal/dev-log&#xA;unix  2      [ ]         DGRAM                    9862     /run/systemd/journal/syslog&#xA;unix  3      [ ]         SEQPACKET  CONNECTED     278774   @0001b&#xA;unix  3      [ ]         DGRAM                    9844     /run/systemd/notify&#xA;unix  3      [ ]         STREAM     CONNECTED     672328   &#xA;unix  3      [ ]         STREAM     CONNECTED     17853    &#xA;unix  3      [ ]         STREAM     CONNECTED     20773    /run/systemd/journal/stdout&#xA;unix  3      [ ]         STREAM     CONNECTED     280847   &#xA;unix  3      [ ]         STREAM     CONNECTED     17269    @/tmp/.X11-unix/X0&#xA;unix  3      [ ]         STREAM     CONNECTED     73730    /var/run/dbus/system_bus_socket&#xA;unix  3      [ ]         STREAM     CONNECTED     19760    &#xA;unix  3      [ ]         STREAM     CONNECTED     670256   @/dbus-vfs-daemon/socket-w2sHGKfi&#xA;unix  3      [ ]         STREAM     CONNECTED     672329   @/dbus-vfs-daemon/socket-19luYW2N...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tracked it down up to: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;32411 _apt /usr/lib/apt/methods/http enp2s0 0.572 20.516 KB/sec &lt;/p&gt;&#xA;&#xA;&lt;p&gt;31916 _apt /usr/lib/apt/methods/http enp2s0 0.547 20.490 KB/sec&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The appcenter is indeed causing the problem, the solution to stop the appcenter from auto starting worked for my system.&lt;/p&gt;&#xA;" OwnerUserId="9426" LastEditorUserId="9426" LastEditDate="2017-04-20T07:51:28.227" LastActivityDate="2017-04-20T07:51:28.227" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11601" PostTypeId="2" ParentId="11505" CreationDate="2017-04-18T19:08:39.537" Score="2" Body="&lt;p&gt;Maybe you could use the System Load Indicator. &#xA;&lt;a href=&quot;https://launchpad.net/indicator-multiload&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/indicator-multiload&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-04-18T19:08:39.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11602" PostTypeId="1" AcceptedAnswerId="11603" CreationDate="2017-04-18T19:12:16.603" Score="1" ViewCount="338" Body="&lt;p&gt;I have 4 different e-mail accounts (don't even ask…), and I wonder is there a way to connect all accounts to the default e-mail client.&lt;/p&gt;&#xA;" OwnerUserId="9401" LastEditorUserId="578" LastEditDate="2017-04-18T20:15:28.787" LastActivityDate="2017-04-18T20:15:28.787" Title="Connect more accounts to e-mail client" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11603" PostTypeId="2" ParentId="11602" CreationDate="2017-04-18T20:12:42.127" Score="3" Body="&lt;p&gt;Yes there is, you can setup multiple mail accounts in Pantheon Mail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Menu / Accounts (or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;m&lt;/kbd&gt;) and with &lt;code&gt;+&lt;/code&gt; you can add a new account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BgpoE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BgpoE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-18T20:12:42.127" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11605" PostTypeId="1" AcceptedAnswerId="11614" CreationDate="2017-04-18T23:03:08.500" Score="3" ViewCount="1010" Body="&lt;p&gt;First of all, your official &lt;a href=&quot;https://elementary.io/docs/code/getting-started#getting-started&quot; rel=&quot;nofollow noreferrer&quot;&gt;tutorial&lt;/a&gt; on getting started with Vala GUI development is excellent. I am wanting to move away from hand-coding my window layouts and I want to use Glade XML files. I have the following code which works:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;using Gtk;&#xA;&#xA;public void on_button1_clicked (Button source) {&#xA;    source.label = &quot;Thank you!&quot;;&#xA;}&#xA;&#xA;public void on_button2_clicked (Button source) {&#xA;    source.label = &quot;Thanks!&quot;;&#xA;}&#xA;&#xA;int main (string[] args) {&#xA;    Gtk.init (ref args);&#xA;&#xA;    try {&#xA;        // If the UI contains custom widgets, their types must've been instantiated once&#xA;        // Type type = typeof(Foo.BarEntry);&#xA;        // assert(type != 0);&#xA;        var builder = new Builder ();&#xA;        builder.add_from_file (&quot;sample.ui&quot;);&#xA;        builder.connect_signals (null);&#xA;        var window = builder.get_object (&quot;window&quot;) as Window;&#xA;        window.show_all ();&#xA;        Gtk.main ();&#xA;    } catch (Error e) {&#xA;        stderr.printf (&quot;Could not load UI: %s\n&quot;, e.message);&#xA;        return 1;&#xA;    }&#xA;&#xA;    return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, it only works because I have hard-coded the location of the glade XML file (&lt;code&gt;sample.ui&lt;/code&gt;). If I move the &lt;code&gt;.ui&lt;/code&gt; file then the app breaks. I have done some research and it looks like I need to use a GResource to specify the XML file and then load it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would it be possible to create a short tutorial on how to properly compile and access assets when building a Vala GUI app please?&lt;/p&gt;&#xA;" OwnerUserId="9196" LastActivityDate="2017-04-19T15:31:31.637" Title="Proper way to include assets when compiling a Vala GUI program" Tags="|vala|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11610" PostTypeId="2" ParentId="10677" CreationDate="2017-04-19T06:25:18.947" Score="1" Body="&lt;p&gt;I think that it may be because of auto update performed by AppCenter. I noticed that too on my machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how to disable these updates:&#xA;1. Kill AppCenter&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;`killall appcenter`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2.Show all the hidden startup applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.launch Gnome Session Properties application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gnome-session-properties&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.Find AppCenter and uncheck it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it should update only when you'll click updates in AppCenter or via terminal with&#xA;&lt;code&gt;sudo apt-get update&lt;/code&gt;&#xA;and&#xA;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&#xA;Commands&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-04-19T06:25:18.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11614" PostTypeId="2" ParentId="11605" CreationDate="2017-04-19T15:31:31.637" Score="3" Body="&lt;p&gt;This is one of those things where you probably want to use a build system to handle everything for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you need an XML file to describe your resources.  Something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;gresources&amp;gt;&#xA;  &amp;lt;gresource prefix=&quot;/com/foo/bar&quot;&amp;gt;&#xA;    &amp;lt;file compressed=&quot;true&quot; preprocess=&quot;xml-stripblanks&quot;&amp;gt;sample.ui&amp;lt;/file&amp;gt;&#xA;  &amp;lt;/gresource&amp;gt;&#xA;&amp;lt;/gresources&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you use the &lt;code&gt;glib-compile-resources&lt;/code&gt; tool to compile the XML description and the resources into a C file with something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;glib-compile-resources --generate-source --target sample.c sample.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then pass the generated C to valac along with the XML description&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;valac ... --gresources=sample.xml sample.c yourfile.vala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At that point you can either have Gtk.Builder load from a resource&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var builder = new Gtk.Builder.from_resource(&quot;/com/foo/bar/sample.ui&quot;);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or, if your UI file is a template, you can just do something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[GtkTemplate (ui = &quot;/com/foo/bar/sample.ui&quot;)]&#xA;public class MainWindow : Gtk.Window {&#xA;  ...&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2017-04-19T15:31:31.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11615" PostTypeId="2" ParentId="7889" CreationDate="2017-04-19T16:44:30.607" Score="2" Body="&lt;p&gt;I wanted to switch the Left Alt and Left Ctrl locations.  I was able to accomplish this by installing the Gnome Tweak tool and adjust it under the typing settings.  I think so longs as your not adjusting anything else in the gnome tweak tool you should be fine.    &lt;/p&gt;&#xA;" OwnerUserId="9441" LastActivityDate="2017-04-19T16:44:30.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11616" PostTypeId="1" CreationDate="2017-04-19T17:06:42.907" Score="1" ViewCount="750" Body="&lt;p&gt;I install Loki 0.4 on a MacBook White Dual core 2,4 Ghz. The wifi is there but try to connect and time run out (server not found). I think it may be wifi drivers. Please help.&lt;/p&gt;&#xA;" OwnerUserId="9442" LastActivityDate="2017-10-01T14:14:25.887" Title="Wifi not working Elementary OS Loki 0.4" Tags="|release-loki|wifi|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11617" PostTypeId="1" AcceptedAnswerId="11619" CreationDate="2017-04-19T18:00:41.657" Score="0" ViewCount="310" Body="&lt;p&gt;When I turned on my computer plank was duplicated. I have no idea why. I have moved the second plank to the side of the screen to show them both using: plank --preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The left plank is the real plank and it is the only one that I can control. the bottom one is stuck there but the apps on it change according to the 'main' one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please tell me how to fix this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;a href=&quot;https://i.stack.imgur.com/RkpHp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RkpHp.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9098" LastActivityDate="2017-04-19T18:55:47.840" Title="Duplicate Plank" Tags="|plank|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11618" PostTypeId="1" CreationDate="2017-04-19T18:42:55.127" Score="1" ViewCount="78" Body="&lt;p&gt;As the title says, the system will randomly &quot;lock me out&quot; of my laptop if it goes to sleep by itself. The lockscreen won't allow me to click and input my password again, which forces me to do a full reboot every single time it happens, which is annoying since it uses around 2 minutes to boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's an older Packard Bell (Intel); a well supported device with no driver issues.&lt;/p&gt;&#xA;" OwnerUserId="9444" LastActivityDate="2017-04-20T08:37:50.440" Title="Suspension of system results in unresponsive lockscreen" Tags="|release-loki|greeter|suspend|security|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11619" PostTypeId="2" ParentId="11617" CreationDate="2017-04-19T18:55:47.840" Score="1" Body="&lt;p&gt;You can remove the docks you don't want any more from &lt;code&gt;net.launchpad.plank enabled-docks&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset net.launchpad.plank enabled-docks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;via the command line or by the &lt;em&gt;dconf Editor&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-19T18:55:47.840" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11621" PostTypeId="2" ParentId="7224" CreationDate="2017-04-19T19:07:19.660" Score="1" Body="&lt;p&gt;You might want to try via a Snap package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install snapd&#xA;sudo snap install ipfs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-19T19:07:19.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11622" PostTypeId="2" ParentId="11505" CreationDate="2017-04-19T19:11:26.393" Score="3" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/GGleb/indicator-netspeed-unity&quot; rel=&quot;nofollow noreferrer&quot;&gt;indicator-netspeed-unity&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/r7VyD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r7VyD.png&quot; alt=&quot;Something like this?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:fixnix/netspeed&#xA;sudo apt-get update&#xA;sudo apt-get install indicator-netspeed-unity&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-19T22:32:25.637" LastActivityDate="2017-04-19T22:32:25.637" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11624" PostTypeId="2" ParentId="11566" CreationDate="2017-04-19T21:37:01.200" Score="1" Body="&lt;p&gt;Hello and welcome to the large family of Optimus-enabled-elementary-powered-laptop users, I too own a slightly similar model (Asus K53SD, i3-2350M, nVidia GeForce 610M, 6GB RAM) and had it happily spew Xorg errors and kernel panics for a long time. The laptop ran very hot all the time, even idle, and the battery drained at an alarming rate. The general idea was that both graphic cards were active, and they were both trying to access the same resources.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution was to upgrade the kernel and install the appropriate nVidia driver from the Ubuntu drivers PPA. BUT the thing is, not any combination will work, for me it was a trial-and-error process: upgrade to a certain kernel, install an nVidia driver from the ppa, check functionality, fail, purge driver, install next one, and so on. It took a while, but got lucky and managed to find a very stable combination:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Kernel 4.8.0-040800rc6-generic&lt;/li&gt;&#xA;&lt;li&gt;nvidia-370&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I know the kernel is a Release Candidate, but it's the only one that worked for me, the machine behaves exemplary, and frankly I've been quite reluctant to try another upgrade, for it might break everything. So these are my steps, proceed with care:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Kernel upgrade:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mkdir upgrade&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd upgrade&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8-rc6/linux-headers-4.8.0-040800rc6_4.8.0-040800rc6.201609121119_all.deb&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8-rc6/linux-headers-4.8.0-040800rc6-generic_4.8.0-040800rc6.201609121119_amd64.deb&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.8-rc6/linux-image-4.8.0-040800rc6-generic_4.8.0-040800rc6.201609121119_amd64.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg -i *.deb&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add Ubuntu drivers repository:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install nVidia driver:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install nvidia-370 nvidia-settings nvidia-prime&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo reboot&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point, there's a 50% chance you might end up with a black &#xA;screen. If this is the case, open a tty console (&lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;Alt&lt;/code&gt; + &lt;code&gt;F1&lt;/code&gt; &#xA;in the black screen), login with your user and password, and:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt purge nvidia*&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo reboot&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now you should have a functional nVidia driver. From the Applications menu run NVIDIA X Server Settings, select PRIME Profiles and make sure Intel (Power Saving Mode) is selected. If not, select it and relog.&lt;br&gt;&#xA;If the black screen after reboot happens, you just have to try a newer driver from the ppa (replace nvidia-370 in the command above with something else: nvidia-375, nvidia-378). Ultimately, you might have to try a different kernel.&lt;br&gt;&#xA;PRIME Profiles will allow you to manually switch between graphics cards, as needed. Using Intel will increase battery duration and keep your laptop cool, using nVidia will make games run better.  &lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-20T06:37:29.130" LastActivityDate="2017-04-20T06:37:29.130" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11626" PostTypeId="1" AcceptedAnswerId="12775" CreationDate="2017-04-20T02:18:22.630" Score="1" ViewCount="803" Body="&lt;p&gt;My Ethernet is not working on elementary os loki. I have tried updating the driver to the r8168 driver and that does not seem to help. Looks like everything is installed properly , however, when I plug in the Ethernet cable, nothing happens. Its like as if the cable was unplugged from the other side. I have checked to make sure the cable is working fine as the same setup works on another laptop that is running windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is some relevant information from some commands that might be useful:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lsmod | grep r816*&#xA;r8168                 487424  0&#xA;&#xA;$ uname -a&#xA;Linux Z50 4.4.0-72-generic #93-Ubuntu SMP Fri Mar 31 14:07:41 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux&#xA;&#xA;$ sudo lshw -c NET       &#xA;  *-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       logical name: enp1s0&#xA;       version: 10&#xA;       serial: 68:f7:28:ad:ac:5a&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.041.00-NAPI duplex=full latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s&#xA;       resources: irq:43 ioport:3000(size=256) memory:c0504000-c0504fff memory:c0500000-c0503fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: Wireless 3160&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wlp2s0&#xA;       version: 93&#xA;       serial: 34:e6:ad:01:09:eb&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=4.4.0-72-generic firmware=17.352738.0 ip=192.168.1.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn&#xA;       resources: irq:49 memory:c0400000-c0401fff&#xA;&#xA;$ ifconfig -a&#xA;enp1s0    Link encap:Ethernet  HWaddr 68:f7:28:ad:ac:5a  &#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:183 errors:0 dropped:1 overruns:0 frame:0&#xA;          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:22814 (22.8 KB)  TX bytes:0 (0.0 B)&#xA;          Interrupt:43 Base address:0x8000 &#xA;&#xA;lo        Link encap:Local Loopback  &#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:512 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:512 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1 &#xA;          RX bytes:75048 (75.0 KB)  TX bytes:75048 (75.0 KB)&#xA;&#xA;wlp2s0    Link encap:Ethernet  HWaddr 34:e6:ad:01:09:eb  &#xA;          inet addr:192.168.1.4  Bcast:192.168.1.255  Mask:255.255.255.0&#xA;          inet6 addr: fe80::a3d4:c27e:c456:fb17/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:349200 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:68004 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:525237555 (525.2 MB)  TX bytes:7102805 (7.1 MB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9454" LastEditorUserId="578" LastEditDate="2017-04-20T09:20:06.243" LastActivityDate="2017-07-22T08:30:54.300" Title="Ethernet not working on Loki" Tags="|release-loki|ubuntu|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11629" PostTypeId="2" ParentId="11592" CreationDate="2017-04-20T07:56:45.290" Score="0" Body="&lt;p&gt;I think its still a bug that needs to be picked up by the developers of elementary os. A process thats causing lots of cpu load and heat to the system is a serious bug.&#xA;The solution for my system seems to be:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Kill AppCenter&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.Show all the hidden startup applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.launch Gnome Session Properties application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gnome-session-properties&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.Find AppCenter and uncheck it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it should update only when you'll click updates in AppCenter or via terminal with sudo apt-get update and sudo apt-get upgrade Commands&lt;/p&gt;&#xA;" OwnerUserId="9426" LastActivityDate="2017-04-20T07:56:45.290" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11634" PostTypeId="2" ParentId="10718" CreationDate="2017-04-20T17:34:17.140" Score="1" Body="&lt;p&gt;Just installed it on the 910 dual boot with Win10.  Only issue at this point is getting the wifi to work.  I can BT to my mobile device to get connected but its slow.  Wifi works perfectly under win10.  I have searched everywhere for a resolution with no resolve. Updated firmware did not fix.  I think there is conflict with the 2-in-1 having multi network cards, one for ideapad and the other for laptop.&lt;/p&gt;&#xA;" OwnerUserId="9461" LastActivityDate="2017-04-20T17:34:17.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11635" PostTypeId="1" CreationDate="2017-04-20T18:55:34.617" Score="0" ViewCount="616" Body="&lt;p&gt;I have a Innjoo Leapbook A100 and when I try to install elementary OS (try live and then install or install directly) The installer simply close or crashes. Once it showed an error saying &quot;/usr/lib/ubiquity/bin/ubiquity&quot; crashed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will appreciate your help.&lt;/p&gt;&#xA;" OwnerUserId="9464" LastEditorUserId="16827" LastEditDate="2019-04-16T14:19:49.550" LastActivityDate="2019-04-16T14:19:49.550" Title="/usr/lib/ubiquity/bin/ubiquity Error Installing elementary OS" Tags="|system-installation|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11639" PostTypeId="1" AcceptedAnswerId="11644" CreationDate="2017-04-21T03:40:21.117" Score="1" ViewCount="119" Body="&lt;p&gt;tldr; How can I disable search as you type in files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi, I navigate within folders using keyboard and when I type doc it should focus on documents folder but instead it opens recursive search and shows some doc file in some child folder. How can I disable this behaviour?&lt;/p&gt;&#xA;" OwnerUserId="9470" LastActivityDate="2017-04-21T15:45:39.360" Title="Disable search as you type in pantheon files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11640" PostTypeId="1" CreationDate="2017-04-21T05:38:02.607" Score="0" ViewCount="121" Body="&lt;p&gt;I wish to switch to elementary OS from Ubuntu. Thing is, I've installed lots of software on Ubuntu. And I'm not patient enough to install all of them again once I install elementary OS. Is there any way that I can compress all the packages in a single file and just decompress it in elementary OS and install packages just like that?!&lt;/p&gt;&#xA;" OwnerUserId="4973" LastEditorUserId="16827" LastEditDate="2019-04-13T08:25:46.090" LastActivityDate="2019-04-13T08:25:46.090" Title="How to migrate all packages to elementary OS" Tags="|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11641" PostTypeId="2" ParentId="11640" CreationDate="2017-04-21T08:44:40.450" Score="1" Body="&lt;p&gt;You can use the tool &quot;apt-clone&quot; for this.&#xA;&lt;a href=&quot;http://manpages.ubuntu.com/manpages/yakkety/man8/apt-clone.8.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://manpages.ubuntu.com/manpages/yakkety/man8/apt-clone.8.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But i would recommend to start fresh and install only those packages you currently use..&lt;/p&gt;&#xA;" OwnerUserId="9471" LastActivityDate="2017-04-21T08:44:40.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11644" PostTypeId="2" ParentId="11639" CreationDate="2017-04-21T15:45:39.360" Score="1" Body="&lt;p&gt;There isn't a way of doing this - other than installing an older version of Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This behaviour (i.e. only one search mode) was introduce at r2445 following bug report &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1604300&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files/+bug/1604300&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, only the first part of the intended changes have been released; the second part is still awaiting review.  The second part will fix the sorting of the search results such that the first result, selected by default, will be the same as what you would have got with the old search by typing (current folder only, starting with search term).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this will remove any need to be able to disable the new behaviour (it is unlikely any such new options/settings would be accepted into elementaryos).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-04-21T15:45:39.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11649" PostTypeId="1" AcceptedAnswerId="11685" CreationDate="2017-04-22T08:53:40.940" Score="0" ViewCount="514" Body="&lt;p&gt;When I start AppCenter in GUI, an icon appears in the dock, and after a few seconds it silently crashes, without showing anything. When I start it from terminal, I get the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ERROR 13:25:43.613069] Client.vala:65: Metadata files have errors: /var/lib/app-info/yaml/security.ubuntu.com_ubuntu_dists_xenial-security_multiverse_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/security.ubuntu.com_ubuntu_dists_xenial-security_universe_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/security.ubuntu.com_ubuntu_dists_xenial-security_restricted_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-backports_multiverse_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-backports_universe_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-backports_restricted_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-backports_main_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-updates_multiverse_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-updates_universe_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial-updates_main_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial_multiverse_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial_universe_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial_restricted_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/uz.archive.ubuntu.com_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/security.ubuntu.com_ubuntu_dists_xenial-security_main_dep11_Components-amd64.yml.gz Trace/breakpoint trap (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've already tried suggested answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8676/app-center-does-not-start&quot;&gt;here&lt;/a&gt;.&#xA;I'm not sure when the problem appeared. Still I can install packages via terminal without any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the following ppa's (excluding elementary) in my sources.list.d:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#MYSQL&#xA;deb http://repo.mysql.com/apt/ubuntu/ xenial mysql-apt-config&#xA;deb http://repo.mysql.com/apt/ubuntu/ xenial mysql-5.7&#xA;deb http://repo.mysql.com/apt/ubuntu/ xenial mysql-tools&#xA;deb-src http://repo.mysql.com/apt/ubuntu/ xenial mysql-5.7&#xA;#WINE&#xA;deb http://ppa.launchpad.net/wine/wine-builds/ubuntu/ xenial main &#xA;#ROS&#xA;deb http://packages.ros.org/ros/ubuntu xenial main&#xA;#ELEMENTARY TWEAKS&#xA;deb http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu/ xenial main &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The content of sources.list was never changed, but here's the short version (without commented lines):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://uz.archive.ubuntu.com/ubuntu/ xenial main restricted &#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial-updates main restricted &#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial universe &#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial-updates universe &#xA;&#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial multiverse &#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial-updates multiverse &#xA;&#xA;deb http://uz.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse &#xA;&#xA;deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted &#xA;deb http://security.ubuntu.com/ubuntu/ xenial-security universe &#xA;deb http://security.ubuntu.com/ubuntu/ xenial-security multiverse &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="578" LastEditDate="2017-04-25T05:37:14.063" LastActivityDate="2017-07-24T17:09:51.020" Title="AppCenter doesn't start: Metadata files have errors" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11650" PostTypeId="2" ParentId="10900" CreationDate="2017-04-22T08:56:49.253" Score="0" Body="&lt;p&gt;&lt;strong&gt;HOW I SOLVED IT:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This &lt;a href=&quot;http://ask.xmodulo.com/convert-mp3-id3-tag-encodings-linux.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;tutorial&lt;/a&gt; helped me. Basically, I did this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install python-mutagen&#xA;&#xA;find . -name &quot;*mp3&quot; -print0 | xargs -0 mid3iconv -e WINDOWS-1251 -d &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Be careful, this command directly edits the files, so before doing it, you have to be sure that it's the right encoding. Or just make a backup. Also you have to re-import that song to see the changes or play it from another directory.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-04-22T08:56:49.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11651" PostTypeId="2" ParentId="9726" CreationDate="2017-04-22T12:03:23.190" Score="0" Body="&lt;p&gt;This should help fix the issue without having to do a full reboot. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;switch to a console.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Ctrl + Alt + F2&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;enter the following command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo service lightdm restart&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/11185/9042&quot;&gt;https://elementaryos.stackexchange.com/a/11185/9042&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9042" LastActivityDate="2017-04-22T12:03:23.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11654" PostTypeId="2" ParentId="11400" CreationDate="2017-04-22T20:13:04.950" Score="0" Body="&lt;p&gt;Apparently, I had to reinstall bcmwl-kernel-source:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9149" LastEditorUserId="16827" LastEditDate="2019-05-05T11:01:01.017" LastActivityDate="2019-05-05T11:01:01.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11655" PostTypeId="2" ParentId="2133" CreationDate="2017-04-22T21:07:00.417" Score="5" Body="&lt;p&gt;You can add/edit menu entries manually, too. Elementary follows the &lt;a href=&quot;https://specifications.freedesktop.org/desktop-entry-spec/latest/&quot; rel=&quot;noreferrer&quot;&gt;Free Desktop specification&lt;/a&gt; standard. Basically, you add/edit the &lt;em&gt;.desktop&lt;/em&gt; files on the global &lt;em&gt;/usr/share/applications/&lt;/em&gt; location or you user location &lt;em&gt;~/.local/share/applications&lt;/em&gt;, then relogin (or restart the panel app) to see your changes.&#xA;Also see their &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#app-launchers&quot; rel=&quot;noreferrer&quot;&gt;official doc&lt;/a&gt; and this &lt;a href=&quot;https://devkeep.wordpress.com/2014/02/17/add-custom-application-to-applications-menu-in-elementary-os/&quot; rel=&quot;noreferrer&quot;&gt;blog post&lt;/a&gt; for more info.&lt;/p&gt;&#xA;" OwnerUserId="5056" LastEditorUserId="5056" LastEditDate="2017-04-22T21:22:19.507" LastActivityDate="2017-04-22T21:22:19.507" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11656" PostTypeId="1" CreationDate="2017-04-22T22:32:10.550" Score="-1" ViewCount="172" Body="&lt;p&gt;Initial situation: &#xA; - 1 x 120GB SSD (GPT) Windows partition &#xA; - 1 x 500GB HDD (GPT) elementary OS partition&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can read in the title i try to achieve a dual boot setup with elementary OS and windows 10. My Windows is currently installed on sda (SSD) and elementary OS on sdb (HDD). Currently I just can boot into eOS with grub. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried using boot-repair with different parameters. It seems that windows boot partition is kinda fucked up. I also tried to fix that by typing some repair commands in the cmd (bootrec /fixboot...). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For further informations you can look at this &lt;a href=&quot;http://paste2.org/FDw1P5On&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste2.org/FDw1P5On&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9482" LastEditorUserId="308" LastEditDate="2018-08-07T16:49:52.483" LastActivityDate="2018-08-07T16:49:52.483" Title="Try to dual boot elementary OS with windows 10" Tags="|boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11657" PostTypeId="2" ParentId="1304" CreationDate="2017-04-23T10:01:18.867" Score="1" Body="&lt;p&gt;If you use Windows 10 then you need to install a iso burner like: ISO Workshop.&#xA;Then you put the DVD or USB in your computer/laptop en then you go tho the boot menu. Select the device en then it (maybe) works. If it works and you completed the setup go to the terminal (because App Center may not work) and type: sudo apt-get upgrade. That may take a while. Now youre are done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;p.s sorry for my bad English&lt;/p&gt;&#xA;" OwnerUserId="9486" LastActivityDate="2017-04-23T10:01:18.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11658" PostTypeId="1" CreationDate="2017-04-23T12:50:59.323" Score="0" ViewCount="801" Body="&lt;p&gt;I'd like to install Mondo as desaster recovery solution.&#xA;I tryed some howto (&lt;a href=&quot;https://sourceforge.net/p/mondo/mailman/message/35591945/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://sourceforge.net/p/mondo/mailman/message/35591945/&lt;/a&gt;) but no succes. Error was not enough memeory (les 32MB). I think this is more a bug than a real error ,massage :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any Howto for Mondo for elementary loki?&lt;/p&gt;&#xA;" OwnerUserId="9487" LastActivityDate="2019-05-28T21:20:57.357" Title="howto install Mondo an elementary loki (16.04)" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11659" PostTypeId="2" ParentId="11029" CreationDate="2017-04-23T13:56:15.247" Score="2" Body="&lt;p&gt;I also have the same issue. The mouse becomes completely unresponsive. However i could navigate with keyboard. I found a quick solution. Pressing win + space to open the launcher fixes it for me. At least for some time.&lt;/p&gt;&#xA;" OwnerUserId="9488" LastActivityDate="2017-04-23T13:56:15.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11660" PostTypeId="2" ParentId="11482" CreationDate="2017-04-23T14:01:23.857" Score="2" Body="&lt;p&gt;There was some problem that messed up the update screen. Elementary released new updates that solved it. In particular, you need to install the latest packagekit package:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install packagekit&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/important-update-released-501c9d9f28b&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2017-04-23T14:01:23.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11661" PostTypeId="2" ParentId="11482" CreationDate="2017-04-23T14:40:03.647" Score="0" Body="&lt;p&gt;I had a similar issue last week and I was able to fix it with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It installed all the missing updates and now I'm able to install updates from app center again.&lt;/p&gt;&#xA;" OwnerUserId="9042" LastActivityDate="2017-04-23T14:40:03.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11662" PostTypeId="1" AcceptedAnswerId="11917" CreationDate="2017-04-23T16:36:12.233" Score="0" ViewCount="228" Body="&lt;p&gt;I am trying to use &lt;a href=&quot;https://launchpad.net/~nemh/+archive/ubuntu/systemback&quot; rel=&quot;nofollow noreferrer&quot;&gt;Systemback&lt;/a&gt; with ElemntaryOS, but the resulting backup will not boot for want of AUFS support.  Is the kernel modified from the base Ubuntu kernel?  Thanks. &lt;/p&gt;&#xA;" OwnerUserId="9489" LastActivityDate="2017-05-14T16:09:36.517" Title="Does the kernel have AUFS support" Tags="|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11663" PostTypeId="2" ParentId="11662" CreationDate="2017-04-23T16:53:48.147" Score="0" Body="&lt;p&gt;You might have to install &lt;code&gt;aufs-tools&lt;/code&gt;. Type in a terminal window:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install aufs-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-23T16:53:48.147" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11665" PostTypeId="2" ParentId="11367" CreationDate="2017-04-23T20:13:51.130" Score="1" Body="&lt;p&gt;Tried to install E OS on my dell xps 9550 and found the solution for your problem while searching for mine (how ironic) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 Reset BIOS settings to default &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 Boot windows &lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 Run command 'msconfig '&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 Tab 'boot' and tap 'safe mode'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5 Restart, enter BIOS and switch RAID to AHCI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6 Restart and windows will boot in Safe mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;7 Run msconfig and untap safe mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;8 Restart,  insert USB and boot ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;9 This time it will locatie your SSD drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Pls note that this will not work for a HDD&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="9490" LastEditorUserId="-1" LastEditDate="2020-01-10T10:18:52.163" LastActivityDate="2020-01-10T10:18:52.163" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="11668" PostTypeId="2" ParentId="11616" CreationDate="2017-04-23T23:19:21.393" Score="-2" Body="&lt;p&gt;Instalé Loki 0.4 en arranque dual con Windows 10, el wifi a veces funciona en Loki y otras veces me dice desactivado he probado todo lo que encuentro en Internet y me funciona pero al apagar y volver a prender ya no vuelve a funcionar el wifi, en otras distribuciones no he tenido ese problema solo con Loki ¿Alguna ayuda definitiva?&lt;/p&gt;&#xA;" OwnerUserId="9493" LastActivityDate="2017-04-23T23:19:21.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11670" PostTypeId="2" ParentId="11616" CreationDate="2017-04-23T23:54:12.883" Score="-1" Body="&lt;p&gt;Encontré la solución para mi caso corrigiendo el controlador para Ralink. RT3290 y ahora me funciona el Wi-Fi; acá les dejo el enlace:&#xA;&lt;a href=&quot;http://onthim.blogspot.com.ar/2015/06/install-ralink-rt3290-wi-fi-driver-on.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://onthim.blogspot.com.ar/2015/06/install-ralink-rt3290-wi-fi-driver-on.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9493" LastActivityDate="2017-04-23T23:54:12.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11671" PostTypeId="1" CreationDate="2017-04-24T00:12:11.587" Score="9" ViewCount="4068" Body="&lt;p&gt;Are there any plans to integrate an optional connection to Google Drive in the Pantheon file manager? I remember that when I was with Gnome 3 it was as if Google Drive was yet another hard drive or connected device on my computer. Is this possible in elementary OS? Or is it something you guys are looking into?&lt;/p&gt;&#xA;" OwnerUserId="8738" LastEditorUserId="308" LastEditDate="2018-08-07T17:10:54.040" LastActivityDate="2018-08-07T17:10:54.040" Title="Pantheon Integration of Google Drive" Tags="|pantheon-files|files|photos|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="11673" PostTypeId="1" CreationDate="2017-04-24T10:30:35.480" Score="2" ViewCount="134" Body="&lt;p&gt;on my Lenovo Thinkpad X220 I have a WWAN module build in. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0bdb:1911 Ericsson Business Mobile Networks BV &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On Ubuntu (also Windows, but this doesn't matter) it is possible to use the network manger to configure this device. Is it possible to configure and/or to enables and disable it via elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It wouldn't be a problem to configure it with a text file but it would be nice to open and close the connection via network manager.&lt;/p&gt;&#xA;" OwnerUserId="9495" LastEditorUserId="308" LastEditDate="2018-08-07T16:41:33.317" LastActivityDate="2018-08-07T16:41:33.317" Title="Using WWAN on elementary OS" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11674" PostTypeId="2" ParentId="9726" CreationDate="2017-04-24T12:34:43.657" Score="1" Body="&lt;p&gt;This is a known bug: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the workaround: Significant lag loading panel and dock after login (Loki)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-04-24T12:34:43.657" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11675" PostTypeId="1" CreationDate="2017-04-24T13:53:18.607" Score="-1" ViewCount="72" Body="&lt;p&gt;I can disable it in my Firefox browser, but how to delete it completely?&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-04-24T14:14:42.420" Title="How should I uninstall/remove Adobe Shockwave Flash in elementary OS?" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11676" PostTypeId="2" ParentId="11675" CreationDate="2017-04-24T13:53:18.607" Score="1" Body="&lt;p&gt;Open synaptic package manager -&gt; find &lt;code&gt;flashplugin-installer&lt;/code&gt; -&gt; Mark for comeplete removal -&gt; Apply.&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="643" LastEditDate="2017-04-24T14:14:42.420" LastActivityDate="2017-04-24T14:14:42.420" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11677" PostTypeId="1" CreationDate="2017-04-24T14:15:29.853" Score="0" ViewCount="815" Body="&lt;p&gt;&lt;strong&gt;I can't install any programs from AppStore or via 'sudo apt-get install' .&#xA;I tried all: 'sudo dpkg --configure -a' and 'sudo apt update' and 'sudo apt-get update' and 'sudo apt install packagekit':&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what I get after running 'sudo apt update': &lt;a href=&quot;https://pastebin.com/j8GsWBwb&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/j8GsWBwb&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9497" LastActivityDate="2019-04-16T14:12:35.750" Title="Can't update or install anything on Elementary OS loki" Tags="|release-loki|appcenter|repositories|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11678" PostTypeId="1" AcceptedAnswerId="11691" CreationDate="2017-04-24T14:30:02.133" Score="1" ViewCount="288" Body="&lt;p&gt;I discovered a weird little problem, from which I think that other people had it too, but it was never resolved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before, when I switched the background image from a darker one to a light one, the behavior of the wingpanel was that the font color and the indicator icons changed from white to a dark color (close to black). But for some reason I don't know, this behavior suddenly changed: Now, if I switch to a light background image, the wingpanel switches from transparent to half transparent with black background, and the font and the indicator icons stay white.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It just changed this behavior without that I changed anything. Even more weird is: I just created a new user. And with the new user, the behavior is still the old one from before (so: when switching to a light background, the panel stays transparent but font and icons become dark).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it seems, it must be something which changed on a user level. Actually, I liked the old behavior more. Any idea what the reason/issue could be?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: Unfortunately, this is happening again now after updating again. See my comment to the previously accepted answer below. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="9498" LastEditorUserId="9498" LastEditDate="2017-04-26T09:55:29.893" LastActivityDate="2017-04-26T09:55:29.893" Title="Wingpanel suddenly shaded dark instead of changing fonts &amp; icons to dark" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11679" PostTypeId="1" CreationDate="2017-04-24T15:41:59.987" Score="0" ViewCount="483" Body="&lt;p&gt;Loki 0.4 recognizes the wireless internet access point, but will not allow access to internet, either through the browser or file up dates. My equipment is an HP Dv6 laptop, with 8 GB RAM. Loki installs perfectly, recognizes my wi-fi router, but no access. I've tried using ethernet wire, but, still no access. &lt;/p&gt;&#xA;" OwnerUserId="9500" LastEditorUserId="578" LastEditDate="2017-04-25T05:43:16.170" LastActivityDate="2018-12-02T14:36:56.417" Title="How to access the internet?" Tags="|internet|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11680" PostTypeId="2" ParentId="6767" CreationDate="2017-04-24T18:56:44.430" Score="1" Body="&lt;p&gt;Open a terminal emulator and type this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nmcli radio wifi on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="578" LastEditDate="2017-04-25T05:33:21.430" LastActivityDate="2017-04-25T05:33:21.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11681" PostTypeId="2" ParentId="11679" CreationDate="2017-04-24T19:19:37.730" Score="-1" Body="&lt;p&gt;Try &lt;code&gt;sudo service network-manager restart&lt;/code&gt; from command line (cli)&lt;/p&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="6398" LastEditDate="2017-04-27T15:07:43.770" LastActivityDate="2017-04-27T15:07:43.770" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11682" PostTypeId="2" ParentId="11677" CreationDate="2017-04-24T19:24:50.247" Score="-1" Body="&lt;p&gt;Can you browse internet ?&#xA;Seems your package list pissed of...&#xA;Remove the file by &lt;code&gt;sudo rm /etc/apt/sources.list&lt;/code&gt; then &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="16827" LastEditDate="2019-04-16T14:12:35.750" LastActivityDate="2019-04-16T14:12:35.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11685" PostTypeId="2" ParentId="11649" CreationDate="2017-04-24T20:08:15.557" Score="2" Body="&lt;p&gt;I made &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo aptitude purge appstream&#xA;sudo apt install appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Solved the problem. But maybe simply deleting files in &lt;code&gt;/var/lib/app-info/yaml/&lt;/code&gt; would solve the problem too, I don't know.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-04-24T20:08:15.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11686" PostTypeId="2" ParentId="11658" CreationDate="2017-04-24T21:49:51.687" Score="0" Body="&lt;p&gt;You should be able to install Mondo Rescue Disaster Recovery Tool on elementary OS 0.4 Loki by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget ftp://ftp.mondorescue.org/ubuntu/16.04/mondorescue.sources.list&#xA;sudo sh -c &quot;cat mondorescue.sources.list &amp;gt;&amp;gt; /etc/apt/sources.list&quot; &#xA;sudo apt update &#xA;sudo apt install mondo&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-04-24T21:49:51.687" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11687" PostTypeId="1" AcceptedAnswerId="11688" CreationDate="2017-04-25T01:17:57.590" Score="1" ViewCount="1287" Body="&lt;p&gt;It all started after taking a snapshot with default app for the purpose (I use latest Loki version). After that, for no apparent reason, all fonts looks like this (except for browser text and fonts on certain apps, as you can see):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vj1lm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vj1lm.jpg&quot; alt=&quot;Weird text!&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I must say that for some reason, the snapshots always showed text like that; however, now is not just the pics, system fonts looks like that (terminal, wingpanel, and most apps). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to change fonts from system settings but is useless. Ah and there is another session in my computer and it looks the fine, so problem is limited to my own session config. It's related to the fonts rendering I guess. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="6275" LastActivityDate="2020-05-27T16:29:56.597" Title="Fonts looks weird at Loki (and just in my user session!). How do I fix it?" Tags="|release-loki|fonts|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11688" PostTypeId="2" ParentId="11687" CreationDate="2017-04-25T01:47:12.720" Score="5" Body="&lt;p&gt;I solved it after googling a while; this applies to all gnome based enviroments (at least according to &lt;a href=&quot;https://askubuntu.com/questions/4989/how-do-i-reset-gnome-font-configuration&quot;&gt;this&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just run the following lines on terminal, then reset the system normally. Done.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.interface font-name&#xA;gsettings reset org.gnome.desktop.interface document-font-name&#xA;gsettings reset org.gnome.desktop.interface monospace-font-name&#xA;gsettings reset org.gnome.desktop.wm.preferences titlebar-font&#xA;gsettings reset org.gnome.nautilus.desktop font&#xA;gsettings reset org.gnome.desktop.interface text-scaling-factor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Only thing I don't understand is why the screenshot app (named just &lt;code&gt;screenshot-tool&lt;/code&gt;) causes this. Seems like a bug to me.&lt;/p&gt;&#xA;" OwnerUserId="6275" LastActivityDate="2017-04-25T01:47:12.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11691" PostTypeId="2" ParentId="11678" CreationDate="2017-04-25T04:59:57.613" Score="1" Body="&lt;p&gt;Recent update has this bug fix... Are you updated ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It was happening to me, but gone after update&lt;/p&gt;&#xA;" OwnerUserId="9361" LastActivityDate="2017-04-25T04:59:57.613" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11692" PostTypeId="1" CreationDate="2017-04-25T16:10:35.677" Score="2" ViewCount="690" Body="&lt;p&gt;I was thinking, is there an update ISO with the new HWE Stacks (based on Ubuntu 16.04.2) with the kernel 4.8 ??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have issue installing Loki on my Skylake - Optimus laptop, with the kernel 4.4, it won't install even with kernel parameters such as ACPI=off or nomodeset...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks !&lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2017-05-05T11:28:40.243" LastActivityDate="2017-05-05T11:28:40.243" Title="(solved) ISO Elementary Update (HWE Stacks, linux 4.8)" Tags="|system-installation|kernel|iso|" AnswerCount="2" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11693" PostTypeId="1" CreationDate="2017-04-25T19:49:46.637" Score="0" ViewCount="280" Body="&lt;p&gt;I can't use Wi-Fi on my HP Notebook as the network menu only shows Ethernet.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   description: Network controller&#xA;   product: BCM43142 802.11b/g/n [14E4:4365]&#xA;   vendor: Broadcom Corporation [14E4]&#xA;   physical id: 0&#xA;   bus info: pci@0000:02:00.0&#xA;   version: 01&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: cap_list&#xA;   configuration: latency=0&#xA;   resources: memory:91200000-91207fff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10EC:8136]&#xA;       vendor: Realtek Semiconductor Co., Ltd. [10EC]&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: enp3s0&#xA;       version: 07&#xA;       serial: [REMOVED]&#xA;       size: 10Mbit/s&#xA;       capacity: 100Mbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:117 ioport:1000(size=256) memory:91100000-91100fff memory:91000000-91003fff&#xA;WARNING: output may be incomplete or inaccurate, you should run this program as super-user.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9515" LastEditorUserId="26" LastEditDate="2017-04-27T16:43:47.520" LastActivityDate="2017-05-05T20:50:00.137" Title="How can I enable my HP Wi-Fi when it doesn't show in the network menu?" Tags="|settings|wifi|" AnswerCount="2" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11694" PostTypeId="1" CreationDate="2017-04-25T21:48:09.290" Score="0" ViewCount="209" Body="&lt;p&gt;Ok I downloaded the iso created a bootable usb with rufus but when I try to install on my desktop I don't get past the boot: menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sha256 checksum was ok and I triplechecked the rufus options - I used fat32 while the screenshot of instructions says FAT. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whats up with this thing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;G0bble&lt;/p&gt;&#xA;" OwnerUserId="9516" LastActivityDate="2023-12-22T02:03:30.443" Title="stuck at boot menu:No default or UI Config directive found" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11695" PostTypeId="2" ParentId="11694" CreationDate="2017-04-25T21:52:35.597" Score="0" Body="&lt;p&gt;try with different kernel parameter such as nomodeset&lt;/p&gt;&#xA;&#xA;&lt;p&gt;F6 keys to select the options when you are on the live menu screen&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2017-04-25T21:52:35.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11697" PostTypeId="1" CreationDate="2017-04-26T07:38:24.237" Score="0" ViewCount="724" Body="&lt;p&gt;I am emulating elementary OS via VirtualBox on my MacBook Pro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal this command as root&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -t vboxsf source destination&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;outputs:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount: unknown file system type ‘vboxsf‘&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Guest additions were installed.&lt;/p&gt;&#xA;" OwnerUserId="9512" LastEditorUserId="578" LastEditDate="2017-04-26T13:54:56.643" LastActivityDate="2019-04-18T06:01:40.307" Title="mount shared folder in Virtual Box" Tags="|virtualbox|mount|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11698" PostTypeId="2" ParentId="7328" CreationDate="2017-04-26T09:21:30.190" Score="0" Body="&lt;p&gt;Partitioning seems fine.&#xA;My take is that you're actually seeing the UEFI boot menu at startup. Access yor BIOS settings before boot and edit those entries. I usually delete everything in there and create a new &quot;elementary&quot; entry pointing to, in my case, HHD0\EFI\ubuntu\grubx64.efi Save and reboot. Go back to BIOS and set this newly created entry as first in the boot menu.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-04-26T09:21:30.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11700" PostTypeId="1" CreationDate="2017-04-26T16:43:11.120" Score="1" ViewCount="247" Body="&lt;p&gt;I update my system today and a few minutes after the update was done, my system started to fall apart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything began with icons of the window controls not showing up anymore. Further I could start any applications anymore as if they weren't installed. &lt;em&gt;Wingpanel&lt;/em&gt; and &lt;em&gt;plank&lt;/em&gt; were closed and not startable from the terminal, too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to restart my computer, but it's stuck on the elementary logo.&#xA;On recovery mode I can boot however.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Never had an issue like this before, so no idea what to do about it.&#xA;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="9523" LastActivityDate="2018-08-21T08:01:55.180" Title="My system doesn't boot up anymore" Tags="|boot|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11703" PostTypeId="2" ParentId="11693" CreationDate="2017-04-26T20:52:12.443" Score="1" Body="&lt;p&gt;If you have access to the Internet via Ethernet please try the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt install bcmwl-kernel-source -y&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-04-26T20:52:12.443" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11705" PostTypeId="2" ParentId="11697" CreationDate="2017-04-26T23:41:33.397" Score="1" Body="&lt;p&gt;Do you mean &lt;code&gt;vboxfs&lt;/code&gt;? Try it instead ;)&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-04-26T23:41:33.397" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11708" PostTypeId="1" AcceptedAnswerId="11711" CreationDate="2017-04-27T03:32:53.393" Score="0" ViewCount="182" Body="&lt;p&gt;I noticed that every time I open a new window of Files and Terminal, it goes directly to the previous working directory. How can I disable this completely for all applications? &lt;/p&gt;&#xA;" OwnerUserId="9532" LastEditorUserId="9532" LastEditDate="2017-04-27T07:30:15.370" LastActivityDate="2017-04-27T08:24:30.867" Title="How to disable remember last position (directory) in apps?" Tags="|release-loki|pantheon-terminal|files|" AnswerCount="1" CommentCount="0" ClosedDate="2017-04-28T16:45:24.303" ContentLicense="CC BY-SA 3.0" />
  <row Id="11709" PostTypeId="1" CreationDate="2017-04-27T04:34:10.103" Score="1" ViewCount="146" Body="&lt;p&gt;I use a Dell laptop with a docking station with 2 monitors and Loki.&#xA;I don't have problem in changing the wallpaper when I use the laptop alone, without docking station and 2 monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I Use the 2 monitors the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///path/NewWallpaper.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The funny thing is that suppose I have an &quot;OldWallpaper&quot; as wallpaper and I change it, via the previous command, to &quot;NewWallpaper&quot;. If I ask for my actual wallpaper&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.gnome.desktop.background picture-uri&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the output is &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;'file:///path/NewWallpaper.jpg'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I still see the OldWallpaper on my desktop!&#xA;The same happens if I manually click on the NewWallpaper.jpg and choose &quot;Set as Desktop Background&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried with dconf Editor and, as before, there is no correspondence between what I see on my desktop (OldWallpaper) and the picture-uri value (NewWallpaper).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I've tried with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set-wallpaper /path/NewWallpaper.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but the output is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set-wallpaper: command not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any idea about what is going on??&lt;/p&gt;&#xA;" OwnerUserId="9534" LastEditorUserId="9534" LastEditDate="2017-04-28T12:24:58.783" LastActivityDate="2017-04-28T12:24:58.783" Title="Terminal says that the wallpaper is changed but I see that it doesn't!" Tags="|settings|desktop|wallpaper|gnome|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11710" PostTypeId="2" ParentId="6767" CreationDate="2017-04-27T06:44:28.670" Score="1" Body="&lt;p&gt;The Realtek RTL8188EU chipset doesn't work out of the box in Linux Mint 18.x and Ubuntu 16.04.x. Also, it has an optical bug: the strength of available wireless networks is wrongly shown as 0 %.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For installing it, you can proceed like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a. First establish internet connection by other means, for example by ethernet cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b. Launch a terminal window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;c. Check the currently running driver for your wireless chipset:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsmod | grep 8188&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The outcome should show the name of the current driver: r8188eu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;d. Install the required build packages (the building tools with which you're going to build the driver):  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install linux-headers-$(uname -r) build-essential dkms git&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;e. Download the driver packages by means of git, with this command:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;git clone https://github.com/jeremyb31/rtl8188eu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;f. Now you're going to compile the required kernel module from the driver packages. Copy/paste this line into the terminal, in order to enter the folder with the driver packages:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd rtl8188eu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then run this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;make&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;g. Install the compiled module with this command:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;h. Reboot your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i. Check the currently running driver for your wireless chipset: copy/paste the following command line into the terminal:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsmod | grep 8188&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The outcome should now show the name of the new driver: 8188eu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;j. Click on the icon of Network Manager in the system tray, in order to connect with your wireless network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: do NOT install newer kernels, because then you'll probably lose the driver again!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://sites.google.com/site/easylinuxtipsproject/reserve-7#TOC-Realtek-RTL8188EU-chipset-0bda:8179-&quot; rel=&quot;nofollow noreferrer&quot;&gt;Give Credit Where It’s Due&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-04-27T06:44:28.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11711" PostTypeId="2" ParentId="11708" CreationDate="2017-04-27T08:24:30.867" Score="1" Body="&lt;p&gt;You can find answers for your question at these questions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Files: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10555/how-to-choose-the-default-directory-pantheon-files-starts-in/10558#10558&quot;&gt;How to choose the default directory Pantheon-files starts in&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Terminal &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3937/how-to-disable-last-working-directory-in-pantheon-terminal&quot;&gt;How to disable last working directory in pantheon-terminal?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-04-27T08:24:30.867" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11713" PostTypeId="1" AcceptedAnswerId="11716" CreationDate="2017-04-27T15:03:10.247" Score="4" ViewCount="1053" Body="&lt;p&gt;How can I turn on &quot;show open windows&quot; dock element? I deleted this probably accidentally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y6gVE.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y6gVE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9537" LastActivityDate="2017-04-27T22:01:35.923" Title="How can I turn on &quot;show open windows&quot; dock element?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11715" PostTypeId="2" ParentId="11713" CreationDate="2017-04-27T21:46:15.327" Score="3" Body="&lt;ul&gt;&#xA;&lt;li&gt;Go to the applications bar&lt;/li&gt;&#xA;&lt;li&gt;Set your applications bar to &quot;view as grid&quot; by clicking on the icon of four squares on the top left.&lt;/li&gt;&#xA;&lt;li&gt;Look for &quot;Multitasking View&quot;&lt;/li&gt;&#xA;&lt;li&gt;You should now see the blue icon&lt;/li&gt;&#xA;&lt;li&gt;Right click on the icon and choose &quot;Add to Dock&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-27T21:46:15.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11716" PostTypeId="2" ParentId="11713" CreationDate="2017-04-27T21:47:41.930" Score="3" Body="&lt;p&gt;Go to Applications menu, right-click on Multitasking View -&gt; Add to Dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If by any chance it's not there, create a file called gala-multitaskingview.desktop in /usr/share/applications/ with these contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Multitasking View&#xA;Comment=View all open windows and workspaces&#xA;GenericName=Multitasking View&#xA;Icon=multitasking-view&#xA;Terminal=false&#xA;Categories=GNOME;GTK;System;&#xA;Exec=dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1&#xA;X-AppStream-Ignore=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Careful with that Exec line, make sure to copy all of it, it's quite long.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/04Ysj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/04Ysj.png&quot; alt=&quot;Multitasking View in Slingshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Just remembered you could also assign the same functionality to one of the corners of your screen. Just go to System Settings -&gt; Desktop -&gt; Hot Corners, pick a corner and select an option from the drop-down menus. &#xA;There is also a keyboard shortcut: &lt;code&gt;WinKey + A&lt;/code&gt; or &lt;code&gt;⌘+A&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-27T22:01:35.923" LastActivityDate="2017-04-27T22:01:35.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11717" PostTypeId="2" ParentId="11700" CreationDate="2017-04-27T22:00:50.657" Score="-2" Body="&lt;p&gt;I have never had your problem so I cannot really do much to help you, but try this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found this as a suggestion on reddit when I had long boot times. This sped it up, so I guess it is worth a shot.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-27T22:00:50.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11718" PostTypeId="1" CreationDate="2017-04-28T00:17:14.527" Score="2" ViewCount="346" Body="&lt;p&gt;I really like Mail - and it's my default mail app. I want to ask, is there any send/receive button where I could manually refresh the app? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rai&lt;/p&gt;&#xA;" OwnerUserId="9540" LastActivityDate="2017-04-28T11:10:31.787" Title="Is there any send/receive button in Mail?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11719" PostTypeId="2" ParentId="11489" CreationDate="2017-04-28T01:05:44.733" Score="3" Body="&lt;p&gt;What I do is to run the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ nmcli connection show&#xA;NAME      UUID                                  TYPE          DEVICE  &#xA;&#xA;Wired1    49b2a5bb-3104-4d4d-a2d6-ec39d3d7c75c  802-3-ethernet  enp0s25 &#xA;Wireless1 420a1462-c582-430c-9acc-a326b900f8e5  802-11-wireless wlp3s0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will show which connections are active. Then, if I want to switch my wired connection I run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ nmcli device disconnect enp0s25&#xA;Device 'enp0s25' successfully disconnected.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, I active another connection running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ nmcli connection up Wired2&#xA;Connection successfully activated (D-Bus active path: &#xA;/org/freedesktop/NetworkManager/ActiveConnection/12)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9073" LastActivityDate="2017-04-28T01:05:44.733" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11721" PostTypeId="2" ParentId="11656" CreationDate="2017-04-28T03:48:16.843" Score="1" Body="&lt;p&gt;Try running the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I believe that  updates Grub to look for other installed operating systems and add them to its list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other than that, there are too many variables as to what can be the problem. This really cannot be fixed over text on the internet. It is a hands on deal.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-28T03:48:16.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11722" PostTypeId="2" ParentId="2572" CreationDate="2017-04-28T03:52:14.020" Score="1" Body="&lt;p&gt;The way I remove unwanted icons is use the program menulibre.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That will give you a menu editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the Menu Editor and search for Chrome. Hide the icon and save your settings. Close and reopen the Application Bar and see if your duplicate is gone.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-28T03:52:14.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11723" PostTypeId="2" ParentId="3360" CreationDate="2017-04-28T03:57:34.337" Score="0" Body="&lt;p&gt;This is usually caused by trying to force UEFI during install. Use the appropriate install method for your system, you should really never have to force UEFI. Try installing Elementary OS with your computers Legacy Boot option instead and see if you get better results.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-28T03:57:34.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11724" PostTypeId="2" ParentId="3391" CreationDate="2017-04-28T04:12:50.887" Score="1" Body="&lt;p&gt;I tend to use gparted and set my drive up like this.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Partition 1, ext4, Linux Mint     (100gb)&lt;/li&gt;&#xA;&lt;li&gt;Partition 2, ext4, Elementary OS  (100gb)&lt;/li&gt;&#xA;&lt;li&gt;Partition 3, NTFS, Shared Data    (100gb)&lt;/li&gt;&#xA;&lt;li&gt;Partition 4, Swap (16gb (twice the ram size))&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I then set partition 1 as the root /&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will not need two Swap Partitions as both install will use the same swap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There really is not much of a disadvantage to dual booting, you just have to work with it. I recommend a separate partition for your data. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Adding another install in the future is not hard and won't give you much trouble. Here is what I do when adding another install.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Backup your data partition (do all your data if you can)&lt;/li&gt;&#xA;&lt;li&gt;Delete your data partition&lt;/li&gt;&#xA;&lt;li&gt;Create two new partitions where your data partition was.&lt;/li&gt;&#xA;&lt;li&gt;Make your EXT4 partition attached with your Swap and make them extended.&lt;/li&gt;&#xA;&lt;li&gt;Use the other half as a NTFS data partition.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;When installing another OS do not install grub. If you are installing Windows after you have installed Linux, have a live disk ready so that you can install Grub. Windows removes the Grub bootloader and installs its own, which you will have to replace.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-28T04:12:50.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11725" PostTypeId="2" ParentId="4773" CreationDate="2017-04-28T04:21:34.977" Score="0" Body="&lt;p&gt;Sometimes something like this happens. The best thing to do is redownload the iso and try again. Also check to make sure you have enough space for the iso on your USB drive, I've overlooked this before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still have a problem, try a different USB installer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some popular ones are&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;unetbootin&lt;/li&gt;&#xA;&lt;li&gt;rufus&lt;/li&gt;&#xA;&lt;li&gt;Universal USB Installer&lt;/li&gt;&#xA;&lt;li&gt;Linux Live USB Creator&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-28T04:21:34.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11726" PostTypeId="2" ParentId="11692" CreationDate="2017-04-28T10:27:05.580" Score="0" Body="&lt;p&gt;Here's a list of kernel boot params to try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;nomodeset nouveau.modeset=0 quiet splash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;nomodeset i915.modeset=0 nouveau.modeset=0 quiet splash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;nolapic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;maxcpus=1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and, in case you have a touchscreen,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;modprobe.blacklist=i2c_hid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case any of these work, after install upgrade the kernel and install nvidia driver from ubuntu drivers ppa.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-04-28T10:27:05.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11727" PostTypeId="2" ParentId="11718" CreationDate="2017-04-28T11:04:37.423" Score="1" Body="&lt;p&gt;No such button present in Mail, but there is an option to &quot;Always watch for new mail&quot; in Preferences. Enabling it will display &quot;New Email&quot; notifications even if Mail is closed.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-28T11:10:31.787" LastActivityDate="2017-04-28T11:10:31.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11729" PostTypeId="2" ParentId="9166" CreationDate="2017-04-28T12:08:57.517" Score="0" Body="&lt;p&gt;I played with this for a while. After installing Loki and setting it up with everything I needed (including nVidia driver and powertop, both of wich are a constant source of messages), here's my /etc/default/grub:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# If you change this file, run 'update-grub' afterwards to update&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# /boot/grub/grub.cfg.&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# For full documentation of the options in this file, see:&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#   info -f grub -n 'Simple configuration'&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GRUB_DEFAULT=0&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;GRUB_HIDDEN_TIMEOUT_QUIET=true&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;GRUB_TIMEOUT=0&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;GRUB_DISTRIBUTOR=&lt;/code&gt;lsb_release -i -s 2&gt; /dev/null || echo Debian&lt;code&gt;&lt;/code&gt;&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash loglevel=0 rd.systemd.show_status=auto rd.udev.log-priority=0 vt.global_cursor_default=0&quot;&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX=&quot;&quot;&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# Uncomment to enable BadRAM filtering, modify to suit your needs&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# This works with Linux (no patch required) and with any kernel that obtains&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#GRUB_BADRAM=&quot;0x01234567,0xfefefefe,0x89abcdef,0xefefefef&quot;&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# Uncomment to disable graphical terminal (grub-pc only)&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#GRUB_TERMINAL=console&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# The resolution used on graphical terminal&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# note that you can use only modes which your graphic card supports via VBE&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;# you can see them in real GRUB with the command&lt;/code&gt;vbeinfo'&lt;br&gt;&#xA;&lt;code&gt;GRUB_GFXMODE=1920x1080&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# Uncomment if you don't want GRUB to pass &quot;root=UUID=xxx&quot; parameter to Linux&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#GRUB_DISABLE_LINUX_UUID=true&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# Uncomment to disable generation of recovery mode menu entries&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#GRUB_DISABLE_RECOVERY=&quot;true&quot;&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# Uncomment to get a beep at grub start&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;#GRUB_INIT_TUNE=&quot;480 440 1&quot;&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#GRUB_THEME=/boot/grub/themes/Radiano/theme.txt&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setting vt.global_cursor=0 will hide the blinking cursor.&lt;br&gt;&#xA;Make sure to set GRUB_GFXMODE to your resolution values.&#xA;EDIT: Works best with EFI enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The result: elementary logo all the way to the desktop.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-04-28T12:08:57.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11730" PostTypeId="1" AcceptedAnswerId="11731" CreationDate="2017-04-28T12:11:36.790" Score="1" ViewCount="443" Body="&lt;p&gt;How can i set startup commands for application´s in launcher shortcut?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example:&#xA;I want to start my Browser with this command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;opera --disable-reading-from-canvas --disable-webrtc-encryption&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;chromium-browser --no-sandbox --disable-reading-from-canvas --disable-webrtc-encryptio&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9188" LastActivityDate="2017-04-28T14:32:48.413" Title="How to set startup commands for application´s in launcher shortcut?" Tags="|keyboard-shortcuts|command-line|startup|launcher|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11731" PostTypeId="2" ParentId="11730" CreationDate="2017-04-28T13:02:18.350" Score="1" Body="&lt;p&gt;Open Files as root and go to /usr/share/applications/&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Goyqa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Goyqa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find the shortcut you need and open it in Scratch and edit the Exec line with whatever you need.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/htJgv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/htJgv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some applications setup their .desktop files in ~/.local/share/applications/ so you might want to check that folder too.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-04-28T13:02:18.350" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11732" PostTypeId="2" ParentId="11730" CreationDate="2017-04-28T14:32:48.413" Score="0" Body="&lt;p&gt;I think this is included by default:  Nothing to install&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the terminal type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome-session-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you have the nearly same interface as the settings-applications.&#xA;Best of luck.&lt;a href=&quot;https://i.stack.imgur.com/4Cnyj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4Cnyj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2017-04-28T14:32:48.413" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11733" PostTypeId="1" CreationDate="2017-04-28T15:36:37.867" Score="0" ViewCount="938" Body="&lt;p&gt;So I installed Elementary and updated everything. My problem is videos on YouTube have tearing and also videos at 60fps are not fluid all the time, they would have kind of &quot;mini-stutters&quot; quite often. I was wondering if this has to do with the drivers. As far as I know they are installed and (assume) the latest version (even if the information screen has messed up information - see picture below). I'm using Firefox web browser. Found here someone saying to change to &quot;true&quot; some command named gfx.xrender on Firefox, that didn't work (so I put it back as it was before). Is there anything I can do about this? Thanks in advance. PC hardware is also shown on the picture.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6L8FK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6L8FK.png&quot; alt=&quot;It shows my processor is Quad-core and I have more than 8GB&amp;#39;s of RAM&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9541" LastActivityDate="2017-10-28T19:02:44.067" Title="Video tearing and stutter - Help with drivers?" Tags="|drivers|videos|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="11734" PostTypeId="1" AcceptedAnswerId="11736" CreationDate="2017-04-28T15:41:52.497" Score="0" ViewCount="435" Body="&lt;p&gt;I am using Loki. Yesterday I got mysql server update and something went wrong with it, now I can't update my system nor can I install any package.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.&#xA;1 not fully installed or removed.&#xA;After this operation, 0 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] &#xA;Setting up mysql-server-5.7 (5.7.18-0ubuntu0.16.04.1) ...&#xA;insserv: warning: current start runlevel(s) (empty) of script `mysql' overrides LSB defaults (2 3 4 5).&#xA;insserv: warning: current stop runlevel(s) (0 1 2 3 4 5 6) of script `mysql' overrides LSB defaults (0 1 6).&#xA;mysql_upgrade: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) while connecting to the MySQL server&#xA;Upgrade process encountered error and will not continue.&#xA;mysql_upgrade failed with exit status 11&#xA;dpkg: error processing package mysql-server-5.7 (--configure):&#xA; subprocess installed post-installation script returned error exit status 1&#xA;Errors were encountered while processing:&#xA; mysql-server-5.7&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please note&lt;/strong&gt; I did try starting mysql.service before the upgrade and also checked its status which shows 'action running' by &lt;code&gt;systemctl&lt;/code&gt;. After running upgrade command I noticed mysql.service stopped on its own. Also I checked and did found that &lt;code&gt;'/var/run/mysqld/mysqld.sock'&lt;/code&gt; existed before running upgrade.&lt;br&gt;&#xA;I can't even uninstall mysql, so I am stuck in between.&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2017-04-28T20:56:41.847" Title="recent update messed up my system, can't update or install any package" Tags="|release-loki|updates|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11735" PostTypeId="2" ParentId="11734" CreationDate="2017-04-28T16:52:54.460" Score="1" Body="&lt;p&gt;Try &lt;a href=&quot;https://askubuntu.com/a/348484/208911&quot;&gt;forcibly reinstalling MySQL&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge mysql-server mysql-client mysql-common&#xA;sudo apt-get autoremove&#xA;sudo apt-get autoclean&#xA;&#xA;sudo apt update&#xA;sudo apt install mysql-server&#xA;sudo mysql_install_db&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note that this will delete your databases!&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="5208" LastActivityDate="2017-04-28T16:52:54.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11736" PostTypeId="2" ParentId="11734" CreationDate="2017-04-28T17:35:40.343" Score="0" Body="&lt;p&gt;After trial and error, I found the solution:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;enable mysql service: &lt;code&gt;systemctl enable mysql.service&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;and purge it again: &lt;code&gt;sudo apt purge 'mysql*'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2017-04-28T17:35:40.343" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11737" PostTypeId="2" ParentId="11734" CreationDate="2017-04-28T20:56:41.847" Score="0" Body="&lt;p&gt;On my system some of the mysql service files were missing but the package maintainer versions were there, so I was able to fix it by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/mysql/debian-start.dpkg-dist /etc/mysql/debian-start&#xA;sudo mv /etc/init.d/mysql.dpkg-dist /etc/init.d/mysql&#xA;sudo mv /etc/init/mysql.conf.dpkg-dist /etc/init/mysql.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This might explain why purging/reinstalling mysql fixes it since that would recreate those files.&lt;/p&gt;&#xA;" OwnerUserId="9550" LastActivityDate="2017-04-28T20:56:41.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11738" PostTypeId="2" ParentId="11369" CreationDate="2017-04-29T06:01:27.640" Score="0" Body="&lt;p&gt;Looks like there is no need of &lt;code&gt;Refresh&lt;/code&gt; button for &lt;code&gt;Noise&lt;/code&gt;. When I renamed a file, the Music folder is imported automatically to Noise app. If not, importing that folder to the library again will do the trick.&lt;/p&gt;&#xA;" OwnerUserId="8575" LastActivityDate="2017-04-29T06:01:27.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11739" PostTypeId="2" ParentId="11335" CreationDate="2017-04-29T08:54:27.417" Score="1" Body="&lt;p&gt;I have the same problem before with iBus. It works on Ubuntu Unity desktop, but not in elementaryOS. I've not yet try it again. I use NIMF instead to type in Japanese or Korean.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you like to install NIMF for Japanese or Korean you can install with command below :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nimf anthy* libanthy* libhangul*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then on your terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;im-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo im-config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then select NIMF as default IME, click OK.&#xA;Logout then Login again from your account or restart, whatever you like.&#xA;It will appear on the corner (left side of SystemKeyboard) select the IME that you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SEIQy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SEIQy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;頑張って.. 홰팅!홰팅!&lt;/p&gt;&#xA;" OwnerDisplayName="user9556" LastActivityDate="2017-04-29T08:54:27.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11740" PostTypeId="1" CreationDate="2017-04-29T14:44:46.970" Score="0" ViewCount="441" Body="&lt;p&gt;I need precise tutorial about installing Omega T (Cat Tools for translation) on Loki. In this case, Omega T need JRE and I have not installed the JRE yet. Is anybody here can help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="9557" LastActivityDate="2024-03-25T05:00:25.127" Title="How to install Omega T (Cat Tools) and JRE on Loki" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11741" PostTypeId="2" ParentId="3047" CreationDate="2017-04-29T15:07:13.087" Score="1" Body="&lt;p&gt;If it is exfat, you will need to install the files below.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many sd cards seem to have this format by default (out of the box).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install exfat-fuse &#xA;sudo apt install exfat-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2017-05-01T14:15:46.533" LastActivityDate="2017-05-01T14:15:46.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11742" PostTypeId="2" ParentId="11740" CreationDate="2017-04-29T18:58:24.500" Score="0" Body="&lt;p&gt;According to their site, you should download the version including JRE:&#xA;&lt;a href=&quot;https://downloads.sourceforge.net/project/omegat/OmegaT%20-%20Latest/OmegaT%204.1.1/OmegaT_4.1.1_Beta_Linux_64.tar.bz2?r=&amp;amp;ts=1493491348&amp;amp;use_mirror=netcologne&quot; rel=&quot;nofollow noreferrer&quot;&gt;Omega T + JRE for Linux x64 Direct Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unpack the downloaded archive, right-click the newly created OmegaT_4.1.1_Beta_Linux_64 folder -&gt; Open in -&gt; Terminal. In here, input &lt;code&gt;./linux-install.sh&lt;/code&gt; and press Enter.&#xA;From Terminal, launch it with &lt;code&gt;omegat&lt;/code&gt; command. This should be it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also an omegat version available in the ubuntu repository, but that is aparently not working properly. This one installs with &lt;code&gt;sudo apt install omegat&lt;/code&gt; , but I got a  &lt;code&gt;Suitable java binary not found&lt;/code&gt; error, even though I am sure I have it installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: the version from their own website is 4.1, so yeah, the repository version, at 2.3 relesed in 2013, is terribly outdated&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-29T20:08:12.380" LastActivityDate="2017-04-29T20:08:12.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11743" PostTypeId="1" CreationDate="2017-04-30T00:16:16.837" Score="0" ViewCount="1288" Body="&lt;p&gt;Multitasking doesn't work for me, using Loki. I've tried three fresh installs -- no joy. Everything else works great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go to &quot;multitasking view,&quot; I see only a single window, with no apps open on it. There's just the one icon below the window, with a &quot;+&quot; on it. But it doesn't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click in that single window, I just go back to the workspace in use. All the app windows reappear on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had Freya installed on this machine before and multitasking worked fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not happy about this, because I had gotten so used to the excellent way elementary handles multiple workspace.&lt;/p&gt;&#xA;" OwnerUserId="8858" LastActivityDate="2017-09-28T20:44:23.150" Title="How can I get multitasking / multiple workspaces to function in Loki?" Tags="|gala|multitasking-view|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11746" PostTypeId="2" ParentId="2644" CreationDate="2017-04-30T18:45:45.957" Score="1" Body="&lt;p&gt;The System Settings window can be maximized, unmaximized, and resized. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are two arrows on the top right (or at least there should be). Click these to maximize and unmaximize the window. If these do not work try a different method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the keyboard shortcut of (Windows Key + Up Arrow).&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T18:45:45.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11747" PostTypeId="2" ParentId="7859" CreationDate="2017-04-30T19:04:31.273" Score="0" Body="&lt;p&gt;I'm sorry, but all I have is a nonanswer answer, which is try using Thunderbird. I believe Thunderbird Will let you do this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I find the default mail program to lack on some features, which is why I suggest trying this in Thunderbird. If all else fails you should use your internet browser to view your email.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:04:31.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11748" PostTypeId="2" ParentId="8361" CreationDate="2017-04-30T19:33:00.273" Score="1" Body="&lt;p&gt;I make my own brightness hotkeys using xbacklight.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After xbacklight is installed:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Go into System Settings&lt;/li&gt;&#xA;&lt;li&gt;Keyboard&lt;/li&gt;&#xA;&lt;li&gt;Custom&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;There is a little plus sign on the bottom right that says &quot;add&quot; when you hover over it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make two custom commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -inc 8&#xA;xbakclight -dec 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Set the keys for these to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(ctrl + (brightness up key))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(ctrl + (brightness down key))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my laptop I use (ctrl + f5) and (ctrl + f6) for my brightness keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What this is done it is possible that you can set your brightness to zero and get no video output. When that happens you will have to press the keys to increase your brightness to get your video back. &lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:33:00.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11749" PostTypeId="2" ParentId="9035" CreationDate="2017-04-30T19:38:55.403" Score="1" Body="&lt;p&gt;Here is a crosspost to my answer on another question about this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11486/no-ethernet-connection/11491#11491&quot;&gt;No ethernet connection&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This guide may have give you a working solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an archive of the article:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://web-beta.archive.org/web/20170410144841/https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://web-beta.archive.org/web/20170410144841/https://unixblogger.com/2016/08/11/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:38:55.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11750" PostTypeId="2" ParentId="4549" CreationDate="2017-04-30T19:44:32.733" Score="0" Body="&lt;p&gt;Run the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will have grub look for Operating Systems installed on your machine and then update its boot list.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:44:32.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11751" PostTypeId="2" ParentId="5173" CreationDate="2017-04-30T19:51:17.587" Score="2" Body="&lt;p&gt;If your external hard drive is brand new, then it has never been formatted. I am going to assume this is the case as I had this same result with a new external drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although, if your drive is encrypted, then Elementary cannot open the drive and see the files. Your drive may be encrypted, but you would know if you did that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to install and run gparted to add a partition to your external drive. Run the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gparted&#xA;sudo gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once gparted is open look for your device on the top right. BE SURE YOU HAVE SELECTED THE RIGHT DEVICE OR ALL YOUR DATA WILL BE LOST! Then you can add a new partition to your drive. After you have a new partition on your drive, unplug it, then plug it into a different usb port. It should show up in the file manager now.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:51:17.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11752" PostTypeId="2" ParentId="5342" CreationDate="2017-04-30T19:54:42.233" Score="1" Body="&lt;p&gt;Go into your bios and check your boot settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure that your Linux install is set to launch first. Sometimes the boot order of the operating systems installed on your hard drive get shuffled. You will want to make sure Linux takes precedent over Windows, or your computer will boot weird.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:54:42.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11753" PostTypeId="2" ParentId="5348" CreationDate="2017-04-30T19:58:00.787" Score="1" Body="&lt;p&gt;If you have a program you have installed that gives you a problem, try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge libreoffice&#xA;sudo apt-get -f install&#xA;sudo apt-get install libreoffice&#xA;sudo apt-get -f install&#xA;libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&quot;sudo -f install&quot; essentially fixes bad installs and missing dependencies/libraries/whatever.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T19:58:00.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11754" PostTypeId="2" ParentId="5630" CreationDate="2017-04-30T20:03:58.937" Score="2" Body="&lt;p&gt;A supposed fix is to run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I too had long boot times. I found this fix and tried it and I have not had issues with boot times since.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T20:03:58.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11755" PostTypeId="2" ParentId="7300" CreationDate="2017-04-30T20:28:47.560" Score="0" Body="&lt;p&gt;Here is a cross post from another question I recently answered:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8361/cannot-change-brightness-on-lock-screen/11748#comment13896_8361&quot;&gt;Cannot change brightness on lock screen&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I make my own brightness hotkeys using xbacklight.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After xbacklight is installed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go into System Settings&#xA;Keyboard&#xA;Custom&#xA;There is a little plus sign on the bottom right that says &quot;add&quot; when you hover over it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make two custom commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -inc 8&#xA;xbakclight -dec 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Set the keys for these to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(ctrl + (brightness up key))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(ctrl + (brightness down key))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my laptop I use (ctrl + f5) and (ctrl + f6) for my brightness keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What this is done it is possible that you can set your brightness to zero and get no video output. When that happens you will have to press the keys to increase your brightness to get your video back.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T20:28:47.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11756" PostTypeId="2" ParentId="8922" CreationDate="2017-04-30T20:38:03.027" Score="0" Body="&lt;p&gt;Stick with using the Default Open Source drivers. Installing the one from AMD will give you a black screen on boot and then you will have a hell of a time undoing and fixing that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stick with the defaults as the RX 480 truly is not supported for Elementary by AMD.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-04-30T20:38:03.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11757" PostTypeId="2" ParentId="11733" CreationDate="2017-04-30T20:50:18.563" Score="1" Body="&lt;p&gt;There are many suggestions online and I'm sure you've already seen many of them, but most are either impractical (modifying Chrome paramaters, only to have them reset by an update) or even, in my opinion, too risky (patching and installing the unsupported amdgpu driver).&lt;br&gt;&#xA;Fortunately the open-source radeon driver got A LOT better since kernel 4.4 (currently run by elementary OS), so there isn't much else to recommend, except a kernel upgrade. Keep in mind kernel upgrades are usually discouraged, especially when it comes to production environments since they can lead to data loss and unstable, sometimes unresponsive, systems. Still, a newer kernel usually brings improvements&lt;br&gt;&#xA;If you're willing to test it, notable improvements to the radeon driver have been made beginning with kernel 4.9.&lt;br&gt;&#xA;If you run in any trouble booting a newly installed kernel, you can always reboot and select the older functioning one from the grub menu (press and hold &lt;code&gt;Shift&lt;/code&gt; key while booting). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions (run the following commands in Terminal, one line at a time, input your password when prompted; lines beginning with wget are long, make sure to copy them correctly):  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir tmp&#xA;&#xA;cd tmp&#xA;&#xA;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9.25/linux-headers-4.9.25-040925_4.9.25-040925.201704270431_all.deb&#xA;&#xA;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9.25/linux-headers-4.9.25-040925-generic_4.9.25-040925.201704270431_amd64.deb&#xA;&#xA;wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.9.25/linux-image-4.9.25-040925-generic_4.9.25-040925.201704270431_amd64.deb&#xA;&#xA;sudo dpkg -i *.deb&#xA;&#xA;sudo reboot  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To see the currently running kernel use &lt;code&gt;uname -r&lt;/code&gt; in Terminal.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-04-30T21:05:20.570" LastActivityDate="2017-04-30T21:05:20.570" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11759" PostTypeId="1" CreationDate="2017-04-30T21:48:48.657" Score="2" ViewCount="3836" Body="&lt;p&gt;Installed Loki a few days ago, and the biggest headache I've had was figuring out how to use the multiple workspaces feature. From what I read, Super-0 is supposed to create a new workspace, but that doesn't seem to work. In my keyboard settings, it says Super-End is the keyboard shortcut for doing that. But that doesn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What DOES seem to work is that if I open an application in a blank workspace, a new workspace is automatically created. So is that the only way, or is there another way?&lt;/p&gt;&#xA;" OwnerUserId="9558" LastActivityDate="2017-09-18T00:27:55.183" Title="Are there different ways to create new workspaces in Loki?" Tags="|workspace|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11760" PostTypeId="1" CreationDate="2017-05-01T00:48:37.600" Score="1" ViewCount="124" Body="&lt;p&gt;I recently switched to elementary OS from Ubuntu, but have found that my touchpad on my ThinkPad T460s behaves worse with fine/precise motion. If I keep my finger pressed in contact and roll it slightly left/right, many times will not register as motion for a while, but then skip a few pixels ahead. This makes it hard to hit specific parts on the screen in a single attempt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to ensure continuous, precise motion? This is the only flaw I've encountered thus far, which is great!&lt;/p&gt;&#xA;" OwnerUserId="9565" LastActivityDate="2017-05-01T00:48:37.600" Title="ThinkPad T460s touchpad jump" Tags="|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11761" PostTypeId="2" ParentId="11759" CreationDate="2017-05-01T01:02:35.637" Score="1" Body="&lt;p&gt;Here is a list of many keyboard shortcuts, starting with the ones for managing windows and workspaces.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WINDOWS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Close&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Alt + f4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Unmaximize&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Alt + f5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Toggle Maximized&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Up Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Minimize&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + H&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Tile Left&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Ctrl + Left Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Tile Right&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Ctrl + Right Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch Windows&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Alt + Tab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch Windows Backwards&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Shift + Alt + Tab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Window Overview&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + W &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Show All Windows&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + A&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;WORKSPACES&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Show Workspace Switcher&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Down Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to First&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to New&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + End&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 2&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 3&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 4&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 5&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 6&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 7&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 8&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Workspace 9&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + 9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Left&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Left Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Switch to Right&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Right Arrow&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SCREENSHOTS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Take a Screenshot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Print Screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Save Screenshot to Clipboard&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ctrl + Print Screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Save Screenshot of a Window&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Alt + Print Screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Save Window-screenshot to Clipboard&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ctrl + Alt + Print Screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now, with all of that said, I prefer using the workspaces feature using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Windows Key + Tab&#xA;&#xA;Shift + Windows Key + Tab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to navigate around. Don't forget you also have a blue square icon on the bottom left for multitasking view.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-05-01T01:02:35.637" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11762" PostTypeId="2" ParentId="11759" CreationDate="2017-05-01T07:04:32.740" Score="5" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;With dynamic workspaces enabled (which is default in elementary OS), you cannot create workspaces explicitely but &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a new empty workspace is created by switching to the right of the rightmost existing workspace or &lt;/li&gt;&#xA;&lt;li&gt;a new workspace is created by moving a window right to the rightmost existing workspace.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you disable dynamic workspaces (via the command line here):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can set the number of workspaces wanted to NUMBER:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences num-workspaces NUMBER&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In this case, you can create new workspace by changing the number on-the-fly. For instance, you could create a script that does that and assign a custom shortcut to this script in &lt;em&gt;System Settings&lt;/em&gt;/&lt;em&gt;Keyboard&lt;/em&gt; (&lt;em&gt;Shortcuts&lt;/em&gt; tab).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;cf., &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10013/how-to-disable-the-empty-workspace-that-appears-when-switching-between-them/10014#10014&quot;&gt;How to disable the empty workspace that appears when switching between them?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastEditorUserId="578" LastEditDate="2017-05-01T07:12:24.590" LastActivityDate="2017-05-01T07:12:24.590" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11763" PostTypeId="1" CreationDate="2017-05-01T12:39:00.887" Score="0" ViewCount="156" Body="&lt;p&gt;I'm a new user to Elementary OS 0.4 Loki, before this I was using Ubuntu 16.04 LTS.  I'm using a System 76 laptop with an Intel I5 processor and 16MB RAM.  I installed Crossover Linux and installed MS Office 2007.  Everything was working fine until I tried to copy and paste a picture taken with my camera into a Word document.  Instead of copying and pasting the picture itself, it brought over a string of the location of the file instead.  The way I was able to bring the picture into the document was by pressing &quot;Import&quot; in Word and selecting the picture.  The copy and paste option seems not to work.  Is this a bug or is there something that I'm doing wrong or need to install?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also installed Libre Office Writer and had the same issues when copying and pasting a picture from my USB drive.  The same occurred when I saved the picture to the hard drive and did a copy and paste.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="9570" LastEditorUserId="9570" LastEditDate="2017-05-01T13:36:21.250" LastActivityDate="2017-05-03T12:50:19.433" Title="Copy and paste pictures doesn't work" Tags="|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11765" PostTypeId="1" CreationDate="2017-05-01T17:17:28.283" Score="1" ViewCount="36" Body="&lt;p&gt;When inserting a USB drive on my laptop, the drive does not popup in Dock like other distributions.  To get to the USB drive, you have to open up a folder and select the USB drive.  Is this done on purpose or is it a bug?  If is done on purpose, is there a way to change the settings so that the USB shows up on the Dock when inserted?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="9570" LastActivityDate="2017-05-01T17:17:28.283" Title="USB drive does not pop up in Dock" Tags="|usb|" AnswerCount="0" CommentCount="0" ClosedDate="2017-05-03T12:51:16.553" ContentLicense="CC BY-SA 3.0" />
  <row Id="11766" PostTypeId="2" ParentId="11743" CreationDate="2017-05-01T18:09:26.740" Score="2" Body="&lt;p&gt;EDIT: running&lt;br&gt;&#xA;    &lt;code&gt;dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1&lt;/code&gt;  in Terminal issues the same dissatisfactory result.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: pressing &lt;code&gt;WinKey&lt;/code&gt; + &lt;code&gt;➡&lt;/code&gt; does not shift the view to new WorkSpace&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This sounds like a bug encountered a while ago, where elementary could not determine the primary display correctly, and not being able to determine the screen for the new Workspace. This was particularly true when using more than one displays.&lt;br&gt;&#xA;SOLUTION: check if the current display is set to primary&lt;br&gt;&#xA;System Settings -&gt; Displays -&gt; Click on the small star in the left upper corner of the display, reboot and verify.&#xA; &lt;a href=&quot;https://i.stack.imgur.com/Pk49V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Pk49V.png&quot; alt=&quot;Primary Display set to default&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-05-01T18:22:59.857" LastActivityDate="2017-05-01T18:22:59.857" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11767" PostTypeId="1" CreationDate="2017-05-01T18:50:04.087" Score="0" ViewCount="815" Body="&lt;p&gt;I installed elementary Loki no problem.&#xA;My Zoostorm mini pc thinks it has a laptop screen and &#xA;That my hdmi TV is secondary. There's no way to disable this in bios.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the install options appeared on my TV and it worked fine. Then i reboot and my TV is secondary display.&#xA;As there is no right click option for display settings i cant do anything at all. Anyone got a clue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried windows key plus arrows and it briefly shows a.bit of left screen but pops back. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tia&lt;/p&gt;&#xA;" OwnerUserId="9572" LastActivityDate="2017-05-02T08:19:04.490" Title="How to switch screens if I only have one" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11768" PostTypeId="2" ParentId="11767" CreationDate="2017-05-02T08:19:04.490" Score="1" Body="&lt;p&gt;You can manage displays (change resolution, choose primary, rotate ...) from System Settings -&gt; Displays. Connect all your available displays and then click on &lt;code&gt;Detect Displays&lt;/code&gt; (although they should be detected automatically).&lt;a href=&quot;https://i.stack.imgur.com/7WJyI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7WJyI.png&quot; alt=&quot;Displays Plug&quot;&gt;&lt;/a&gt;&lt;br&gt;&#xA;You should now have multiple rectangles, one for each active display. All that's left to do now is to set their preferences, pick a primary one (click on the small star in the top left corner), and disable the ones you do not need (untick &lt;code&gt;Use This Display&lt;/code&gt;). The rectangles can also be moved around to reflect the real arrangement of your displays.&lt;br&gt;&#xA;After setting up everything (in your case, set TV as primary), unplug all the other displays (if any connected) and reboot, just to make sure your settings are preserved. &lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-02T08:19:04.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11769" PostTypeId="2" ParentId="11692" CreationDate="2017-05-02T09:07:29.760" Score="1" Body="&lt;p&gt;ok i managed to install the kernel 4.10 and nvidia 381. I turn off the dGPU with prime on the nVidia drivers, power consumption is low so ok&lt;/p&gt;&#xA;&#xA;&lt;p&gt;however, I have issue with the restart or shutdown, the system crash when i tried to do it. Same problem, i got system freeze when i'm pluging the power cable or any usb device...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this computer is so strange... &lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2017-05-04T09:26:19.377" LastActivityDate="2017-05-04T09:26:19.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11770" PostTypeId="1" CreationDate="2017-05-02T10:36:07.243" Score="1" ViewCount="110" Body="&lt;p&gt;Installed Loki over the weekend; first Linux install here at home in a decade. After adding a &quot;user&quot; profile (in addition to my &quot;admin&quot; user), I find I'm stuck logging in under my &quot;user&quot; profile at the greeter prompt. I can su to my admin profile and try to fix stuff, but it's quite annoying to feel locked out of a fresh install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see icons for three profiles: my &quot;user&quot; (with functional password field), my inaccessible &quot;admin&quot; and guest accounts. I can click around with the mouse; processor isn't busy; the other icons simply don't respond. The clock updates, I see the wifi icon, and I can suspend or shutdown from the right top corner menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using the package manager I tried reinstalling greeter - no change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions? Since I don't see this popping up elsewhere I'm guessing it's an issue on my end - not an elementary bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks very much!&lt;/p&gt;&#xA;" OwnerUserId="9554" LastActivityDate="2024-04-02T13:07:20.957" Title="greeter stuck after adding new user" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11772" PostTypeId="1" CreationDate="2017-05-02T13:32:08.380" Score="2" ViewCount="398" Body="&lt;p&gt;After a recent update (end of last week) my Pantheon-Terminal has now a weird behavior: When I open it, it is very shortly transparent but immediately gets opaque after that (maybe not even half a second later). Before, the terminal just stayed transparent, like one would expect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm actually not sure if the update was an update of pantheon-terminal - but I think that there was no update for it, so probably some update for some other component of pantheon is responsible for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody else has this problem too?&lt;/p&gt;&#xA;" OwnerUserId="9498" LastActivityDate="2023-12-28T23:00:20.087" Title="Transparency in pantheon-terminal disappears after half a second" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="11773" PostTypeId="1" CreationDate="2017-05-02T17:13:21.430" Score="0" ViewCount="3733" Body="&lt;p&gt;I have a new Carbon X1 and as a first step I try to install the wifi-driver. I checked arch and it says I need iwlwifi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_5)&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_5)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i googled it and found &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.debian.org/iwlwifi&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.debian.org/iwlwifi&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but first step doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you give a brief summary to install the driver?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;snowparrot&lt;/p&gt;&#xA;" OwnerUserId="9580" LastActivityDate="2017-05-08T02:31:46.963" Title="How to install iwlwifi?" Tags="|wifi|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11774" PostTypeId="2" ParentId="11772" CreationDate="2017-05-02T18:24:51.617" Score="0" Body="&lt;p&gt;You can edit the transparency level in Elementary Tweaks. Give that a shot, see if it sticks.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-02T18:24:51.617" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11775" PostTypeId="2" ParentId="11773" CreationDate="2017-05-02T18:32:47.027" Score="0" Body="&lt;p&gt;Under elementary OS, to get &lt;code&gt;iwlwifi&lt;/code&gt; working, you only have to install the &lt;code&gt;linux-firmware&lt;/code&gt; and the &lt;code&gt;linux-image-extra-virtual&lt;/code&gt; packages.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-02T18:32:47.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11776" PostTypeId="2" ParentId="10343" CreationDate="2017-05-02T18:38:43.033" Score="0" Body="&lt;p&gt;A similar problem here. I import OPVN configuration files (nordvpn servers) successfully, and save them with my user and pass. I can successfully connect, but when I disconnect, that server disappears from my list of configurations. It's as if &quot;disconnect&quot; is also performing a &quot;delete configuration&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only solution so far is to re-import the config file.&lt;/p&gt;&#xA;" OwnerUserId="9581" LastActivityDate="2017-05-02T18:38:43.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11777" PostTypeId="2" ParentId="11773" CreationDate="2017-05-02T18:51:19.733" Score="0" Body="&lt;p&gt;I would just go to Software &amp;amp; Updates and look under Additional Drivers.  If you have a proprietary wifi driver, it will most likely be listed here.  This is probably the most stable way to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise you can try these answers, since EOS is based on Ubuntu:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/608983/verisons-of-iwlwifi-and-firmware-for-my-wireless-card&quot;&gt;https://askubuntu.com/questions/608983/verisons-of-iwlwifi-and-firmware-for-my-wireless-card&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2305111&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2305111&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9499" LastActivityDate="2017-05-02T18:51:19.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11778" PostTypeId="2" ParentId="11392" CreationDate="2017-05-02T20:06:20.703" Score="0" Body="&lt;p&gt;There are several complaints about libinput from what I can tell.  Most answers seem to recommend going back to the synaptics driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can follow the directions here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7545/trackpad-randomly-freezes/7562&quot;&gt;Trackpad randomly freezes&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed these directions and they worked fine on my MBA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I put the various synclient commands that suited me into my .bashrc in order to make it permanent for my user profile.  No more palm detection or errant cursor jumps while I'm typing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your synclient command would be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient PalmDetect=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tested this and it does not pick up the side of my thumb anymore.&lt;/p&gt;&#xA;" OwnerUserId="9499" LastActivityDate="2017-05-02T20:06:20.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11779" PostTypeId="1" CreationDate="2017-05-02T21:07:54.550" Score="0" ViewCount="236" Body="&lt;p&gt;I just installed Elementary on my Lenovo S21e.&#xA;Looks really good but my touchpad and wifi are not working.&#xA;hope this can be solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;greets, Maarten&lt;/p&gt;&#xA;" OwnerUserId="9582" LastEditorUserId="686" LastEditDate="2017-08-03T13:19:21.970" LastActivityDate="2019-04-26T14:02:35.543" Title="Touchpad and wlan not working" Tags="|wifi|touchpad|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11780" PostTypeId="2" ParentId="11779" CreationDate="2017-05-02T23:41:34.777" Score="1" Body="&lt;p&gt;Are you able to connect it to the internet somehow? I'm reading the specs and I see this model does not have an Ethernet port. &#xA;If you can somehow (USB tethering from phone?) get online on it, run in Terminal:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade &amp;amp;&amp;amp; sudo apt dist-upgrade&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install broadcom-sta-common broadcom-sta-dkms broadcom-sta-source&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-02T23:41:34.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11782" PostTypeId="2" ParentId="11763" CreationDate="2017-05-03T06:20:50.070" Score="1" Body="&lt;p&gt;Copying from &lt;em&gt;Files&lt;/em&gt; (&lt;code&gt;pantheon-files&lt;/code&gt;) and pasting to LibreOffice does this indeed. You might want to file a feature request in &lt;code&gt;pantheon-files&lt;/code&gt;: &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+filebug&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/pantheon-files/+filebug&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a workaround, you can drag&amp;amp;drop pictures from &lt;em&gt;Files&lt;/em&gt;: this works with LibreOffice (could not test with Crossover though).&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-03T06:20:50.070" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11783" PostTypeId="1" AcceptedAnswerId="13721" CreationDate="2017-05-03T07:05:21.490" Score="4" ViewCount="18425" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WgpBE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WgpBE.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hello. I am trying to use elementary on my macbook pro, but i won't display wifi unless i plug in usb wifi dongle. So, the drivers are missing i suppose. I had this issue before and it was solved with a system update. Now how can i fix and enjoy elementary os?&lt;/p&gt;&#xA;" OwnerUserId="9585" LastActivityDate="2021-10-27T08:29:54.283" Title="Elementary OS on Macbook won't display wifi settings. How do i fix?" Tags="|wifi|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11788" PostTypeId="2" ParentId="11545" CreationDate="2017-05-03T18:47:35.190" Score="2" Body="&lt;p&gt;I guess Telegram expects the wrong input method. You have two ways to fix it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Tell Telegram (and other Qt apps) to use xim&lt;br&gt;&#xA;Just set QT_IM_MODULE=xim before running it&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run ibus&lt;br&gt;&#xA;Add ibus-daemon to your startup applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know which one is better. There is a discussion in Telegram's github:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/telegramdesktop/tdesktop/issues/1041&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/telegramdesktop/tdesktop/issues/1041&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9595" LastActivityDate="2017-05-03T18:47:35.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11790" PostTypeId="1" CreationDate="2017-05-04T02:20:21.917" Score="2" ViewCount="120" Body="&lt;p&gt;I've got loki installed on a MacBook Air.  Is there a &lt;strong&gt;reliable&lt;/strong&gt; way to ensure that the display wakes again after suspend?  I generally just close my laptop when I'm done with it (like, I guess 99.9999% of laptop users) so that I can pick up where I left off easily.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using the open source drivers, because the Nvidia drivers give me a black screen - this has been long a problem with nvidia and noveau.  I don't do any gaming or graphics-intensive work on this, so I'm happy enough to continue to use noveau.&lt;/p&gt;&#xA;" OwnerUserId="9499" LastActivityDate="2017-05-04T02:20:21.917" Title="MacBook Air fails to wake from suspend" Tags="|display|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11792" PostTypeId="1" AcceptedAnswerId="11813" CreationDate="2017-05-04T03:14:40.757" Score="2" ViewCount="258" Body="&lt;p&gt;When using vim from within the terminal I have the following issues. Vim &quot;visual selection&quot; using Ctrl-v does not work. Instead the terminal tries to paste the last copied text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the vim window is split (using :sp) the bar that splits the vim windows is not adjustable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are these bugs? If not, is there anyway I can get xterm like behavior?&lt;/p&gt;&#xA;" OwnerUserId="9370" LastEditorUserId="84" LastEditDate="2018-05-06T18:11:59.793" LastActivityDate="2019-06-14T00:29:30.353" Title="Vim commands on terminal do not work" Tags="|applications|pantheon-terminal|keyboard-shortcuts|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11794" PostTypeId="1" CreationDate="2017-05-04T09:36:09.200" Score="1" ViewCount="98" Body="&lt;p&gt;I had issue installing Loki but I had it done with the help on an other post &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11692/iso-elementary-update-hwe-stacks-linux-4-8/11769#11769&quot;&gt;see the post here for the whole topic&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to install the kernel 4.10 and nvidia 381. I turn off the dGPU with prime on the nVidia drivers, power consumption is low so ok (don't need the dGPU, i play game on Windows with dual boot)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop configuration : i7 6700HQ, nvidia GTX950m, Samsung SM951 128GB M.2 PCI-e ACHI SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I have issue with the restart or shutdown, the system crash when i tried to do it. Same problem, i got system freeze when i'm pluging the power cable or any usb device...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks !&lt;/p&gt;&#xA;" OwnerUserId="4577" LastEditorUserId="4577" LastEditDate="2017-05-05T11:27:55.430" LastActivityDate="2019-08-25T05:01:40.180" Title="(solved) System freeze when pluging usb device or power cable" Tags="|system-installation|system|graphic-drivers|nvidia|crash|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11796" PostTypeId="1" CreationDate="2017-05-05T01:41:58.973" Score="0" ViewCount="539" Body="&lt;p&gt;Vivaldi browser causes screen flickering while playing videos, which is very annoying. Is there a solution for this?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2019-04-18T17:03:05.830" Title="Vivaldi flickering while watching videos" Tags="|display|web-browser|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11797" PostTypeId="2" ParentId="11569" CreationDate="2017-05-05T02:39:05.580" Score="1" Body="&lt;p&gt;Try hitting &lt;code&gt;CTRL + ALT + F1&lt;/code&gt; to switch to TTY1 and then hit the caps lock key to see if it lets you change it then. If that works you can log back in by hitting &lt;code&gt;CTRL + ALT + F7&lt;/code&gt; on your keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, there is something else you can try. I was having a lot of issues and kernel panic problems with some of the recent Linux 4.4.x kernels that were being pushed through updates. Updating to kernel 4.8.x fixed pretty much all of them. To update your kernel try the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade -y&#xA;sudo apt install --install-recommends xserver-xorg-hwe-16.04 -y&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2017-05-05T02:39:05.580" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11799" PostTypeId="2" ParentId="11794" CreationDate="2017-05-05T11:26:40.663" Score="1" Body="&lt;p&gt;ok I fix the problem by upgrading to kernel 4.11 and blacklist the nouveau driver and install bbswitch and load it at startup via modules.conf&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2017-05-05T11:26:40.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11800" PostTypeId="1" CreationDate="2017-05-05T12:26:20.913" Score="0" ViewCount="247" Body="&lt;p&gt;I need to run the command at startup to calibrate my screen using Xcaliber&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xcaliber --bR=256 --bG=256 --bB=212 --gR=1.04 --gG=0.9600000000000001 --gB=1.01&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I tried to set it as a custom startup command, but it won't run at startup, so I have to do it via the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, when I press the shift key to delete permanently a file, the screen is turning back to the original configuration, so I have to run back the command again..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks !&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2017-10-05T18:12:33.137" Title="Startup command won't execute" Tags="|display|command-line|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11801" PostTypeId="1" CreationDate="2017-05-05T13:00:20.363" Score="2" ViewCount="123" Body="&lt;p&gt;I use Loki and my desktop never turns screen off when inactive my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually this feature was working until a few weeks ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any chance to overcome this issue?&lt;/p&gt;&#xA;" OwnerUserId="7495" LastActivityDate="2017-05-05T13:00:20.363" Title="“Turn off screen when inactive for” doesn't work" Tags="|release-loki|settings|display|system|power|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11803" PostTypeId="1" CreationDate="2017-05-05T19:50:07.220" Score="0" ViewCount="265" Body="&lt;p&gt;Basically after installing Loki (using the homefolder from my prior ubuntu installation) and upon installing i opened up the terminal and did&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which gave me a surprising amount of errors. Now, I have just shrugged at it for a while now, but I feel i had to do something about it sooner or later, and it really irks me. so here's my output of &#xA;, &lt;code&gt;sudo apt update&lt;/code&gt; can anyone tell me what exactly is the problem here?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    Ign:1 http://dk.archive.ubuntu.com/ubuntu loki InRelease&#xA;Ign:2 http://dk.archive.ubuntu.com/ubuntu loki-updates InRelease     &#xA;Hit:3 http://dk.archive.ubuntu.com/ubuntu xenial InRelease           &#xA;Hit:4 http://archive.canonical.com/ubuntu xenial InRelease           &#xA;Ign:5 http://linux.dropbox.com/ubuntu wily InRelease                 &#xA;Ign:6 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki InRelease&#xA;Ign:7 http://dl.google.com/linux/chrome/deb stable InRelease         &#xA;Get:8 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]&#xA;Hit:9 http://dk.archive.ubuntu.com/ubuntu xenial-updates InRelease   &#xA;Hit:10 http://dk.archive.ubuntu.com/ubuntu xenial-backports InRelease&#xA;Hit:11 http://dl.google.com/linux/chrome/deb stable Release          &#xA;Ign:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki InRelease&#xA;Err:13 http://dk.archive.ubuntu.com/ubuntu loki Release              &#xA;  404  Not Found [IP: 2001:2010:0:1::1 80]&#xA;Hit:14 http://linux.dropbox.com/ubuntu wily Release                  &#xA;Err:15 http://dk.archive.ubuntu.com/ubuntu loki-updates Release      &#xA;  404  Not Found [IP: 2001:2010:0:1::1 80]&#xA;Err:16 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release&#xA;  404  Not Found&#xA;Err:17 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release&#xA;  404  Not Found&#xA;Hit:19 http://packages.microsoft.com/repos/vscode stable InRelease   &#xA;Get:21 http://security.ubuntu.com/ubuntu xenial-security/main amd64 DEP-11 Metadata [54.6 kB]&#xA;Hit:22 https://repo.skype.com/deb stable InRelease&#xA;Get:23 http://security.ubuntu.com/ubuntu xenial-security/main DEP-11 64x64 Icons [45.7 kB]&#xA;Get:24 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 DEP-11 Metadata [32.2 kB]&#xA;Get:25 http://security.ubuntu.com/ubuntu xenial-security/universe DEP-11 64x64 Icons [37.0 kB]&#xA;Hit:26 https://apt-mo.trafficmanager.net/repos/dotnet-release xenial InRelease&#xA;Reading package lists... Done &#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (restricted/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (restricted/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (restricted/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (restricted/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (universe/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (universe/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (universe/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (restricted/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (restricted/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11 (restricted/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11-icons (restricted/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Translations (universe/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target DEP-11 (universe/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target DEP-11-icons (universe/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;E: The repository 'http://dk.archive.ubuntu.com/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://dk.archive.ubuntu.com/ubuntu loki-updates Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:29 and /etc/apt/sources.list:81&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:31 and /etc/apt/sources.list:83&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (restricted/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (restricted/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (restricted/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (restricted/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (restricted/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (universe/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (universe/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (universe/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:39 and /etc/apt/sources.list:91&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (restricted/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (restricted/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Translations (restricted/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11 (restricted/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target DEP-11-icons (restricted/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:101&#xA;W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Translations (universe/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target DEP-11 (universe/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target DEP-11-icons (universe/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:51 and /etc/apt/sources.list:103&#xA;W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Translations (multiverse/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target DEP-11 (multiverse/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;W: Target DEP-11-icons (multiverse/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:53 and /etc/apt/sources.list:105&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2017-05-06T00:08:34.197" Title="Loki apt update gives a lot of errors" Tags="|release-loki|updates|ppa|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11804" PostTypeId="2" ParentId="11693" CreationDate="2017-05-05T20:50:00.137" Score="-1" Body="&lt;ol&gt;&#xA;&lt;li&gt;you mast have access to the Internet - smartfon+usbmodem&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get update&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get install firmware-b43-installer&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get remove --purge bcmwl-kernel-source&lt;/li&gt;&#xA;&lt;li&gt;sudo modprobe b43&lt;/li&gt;&#xA;&lt;li&gt;sudo reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;mast OK&lt;/p&gt;&#xA;" OwnerUserId="9616" LastActivityDate="2017-05-05T20:50:00.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11805" PostTypeId="1" CreationDate="2017-05-05T21:32:39.863" Score="1" ViewCount="92" Body="&lt;p&gt;When I boot my Dell E5440 laptop, I often have it docked (Dell docking station) and connected via ethernet.  Network settings doesn't show that wifi is an available option when the computer is booted while connected to ethernet.  When the computer is undocked wifi still does not show unless I reboot the machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to be able to move the computer from docked to undocked and have it switch to wifi.  While an automatic change in adapters would be ideal I don't mind manually connecting, but I don't even have the option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo /etc/init.d/networking restart&lt;/code&gt; doesn't seem to do the trick either.&lt;/p&gt;&#xA;" OwnerUserId="9617" LastEditorUserId="578" LastEditDate="2017-05-06T07:04:55.853" LastActivityDate="2019-10-05T15:01:50.203" Title="Dell laptop boot with ethernet doesn't allow for Wifi when disconnected from ethernet" Tags="|release-loki|wifi|networking|laptop|" AnswerCount="0" CommentCount="0" ClosedDate="2019-10-07T07:20:37.557" ContentLicense="CC BY-SA 3.0" />
  <row Id="11806" PostTypeId="2" ParentId="11803" CreationDate="2017-05-06T00:08:34.197" Score="1" Body="&lt;p&gt;You probably have conflicting PPAs on your setup. Remove all the unnecessary ones and try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you really need the PPAs, add them one by one and &lt;code&gt;apt update&lt;/code&gt; again then weed out those that cause conflicts.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-05-06T00:08:34.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11809" PostTypeId="1" CreationDate="2017-05-06T06:08:20.257" Score="0" ViewCount="433" Body="&lt;p&gt;I'm getting the following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mplayer: error while loading shared libraries: libvdpau.so.1: cannot open shared object file: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Most likely it happened after manually installing &lt;code&gt;NVIDIA-Linux-x86_64-304.135.run&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to resolve this issue?&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="84" LastEditDate="2018-05-05T20:39:52.087" LastActivityDate="2024-04-06T07:07:35.943" Title="mplayer: error while loading shared libraries" Tags="|video-player|shared-libraries|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11810" PostTypeId="2" ParentId="11809" CreationDate="2017-05-06T07:12:33.150" Score="0" Body="&lt;p&gt;You have to install the &lt;code&gt;libvdpau1&lt;/code&gt; package. For instance, via the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libvdpau1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-06T07:12:33.150" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11813" PostTypeId="2" ParentId="11792" CreationDate="2017-05-06T14:18:48.193" Score="1" Body="&lt;p&gt;You will need to use v and not Ctrl-v, or it will paste.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for splits, it's working for me? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Ctrl-w+  increase window size by 1 line&#xA; Ctrl-w-  decrease window size by 1 line&#xA; 10 ctrl-w+  increase window size by 10 lines&#xA; Ctrl-w=  make all equal size&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="863" LastActivityDate="2017-05-06T14:18:48.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11815" PostTypeId="1" CreationDate="2017-05-06T16:23:03.297" Score="1" ViewCount="626" Body="&lt;p&gt;I'm trying to get my Alfa Networks WIFI dongle (based on RT3070) to work, but it seems that the necessary package (firmware-ralink) is not availabe in elementary os. It is in the non-free debian repo.&#xA;Can i add the repo and install the package?&#xA;Does anybody know what i could do to get t to work?&#xA;Any help is very much appreciated!&#xA;Thanks&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;A solution to my problem:&lt;/strong&gt;&#xA;As I am unable to use the onboard and usb devices at the same time, it works to un-check the auto connect on the onboard device. Then the Alfa is able to connect to a given network.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;I tried to install by downloading the .deb file from the debian repo and install via apt. here is the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ./firmware-ralink_0.43_all.deb &#xA;[sudo] password for XXXX:        &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Note, selecting 'firmware-ralink' instead of './firmware-ralink_0.43_all.deb'&#xA;The following NEW packages will be installed:&#xA;  firmware-ralink&#xA;0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 0 B/22.2 kB of archives.&#xA;After this operation, 103 kB of additional disk space will be used.&#xA;Get:1 /home/XXXX/Downloads/firmware-ralink_0.43_all.deb firmware-ralink all 0.43 [22.2 kB]&#xA;Selecting previously unselected package firmware-ralink.&#xA;(Reading database ... 305479 files and directories currently installed.)&#xA;Preparing to unpack .../firmware-ralink_0.43_all.deb ...&#xA;Unpacking firmware-ralink (0.43) ...&#xA;dpkg: error processing archive /home/XXXX/Downloads/firmware-ralink_0.43_all.deb (--unpack):&#xA; trying to overwrite '/lib/firmware/rt3290.bin', which is also in package linux-firmware 1.157.8&#xA;Errors were encountered while processing:&#xA; /home/XXXX/Downloads/firmware-ralink_0.43_all.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;here is the output of &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lshw -c net; rfkill list all&#xA;&#xA;      *-network               &#xA;       description: Ethernet interface&#xA;       product: 82579V Gigabit Network Connection&#xA;       vendor: Intel Corporation&#xA;       physical id: 19&#xA;       bus info: pci@0000:00:19.0&#xA;       logical name: enp0s25&#xA;       version: 04&#xA;       serial: b0:99:28:cd:78:9d&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=10.42.0.182 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s&#xA;       resources: irq:29 memory:e2600000-e261ffff memory:e262b000-e262bfff ioport:3080(size=32)&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: AR9287 Wireless Network Adapter (PCI-Express)&#xA;       vendor: Qualcomm Atheros&#xA;       physical id: 0&#xA;       bus info: pci@0000:0a:00.0&#xA;       logical name: wlp10s0&#xA;       version: 01&#xA;       serial: e0:ca:94:74:87:40&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=ath9k driverversion=4.4.0-77-generic firmware=N/A ip=192.168.10.125 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn&#xA;       resources: irq:18 memory:e0500000-e050ffff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       physical id: 2&#xA;       bus info: usb@1:1.4&#xA;       logical name: wlx00c0ca58180d&#xA;       serial: 00:c0:ca:58:18:0d&#xA;       capabilities: ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rt2800usb driverversion=4.4.0-77-generic firmware=0.29 link=no multicast=yes wireless=IEEE 802.11bgn&#xA;0: phy0: Wireless LAN&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;2: phy2: Wireless LAN&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;the output of iwlist scan&#xA;    wlx00c0ca58180d  Scan completed :&#xA;             Cell 01 - Address: 5C:F4:AB:09:D3:B3&#xA;                  Channel:1&#xA;                  Frequency:2.412 GHz (Channel 1)&#xA;                  Quality=31/70  Signal level=-79 dBm  &#xA;                  Encryption key:on&#xA;                  ESSID:&quot;Internet_B0&quot;&#xA;                  Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s&#xA;                            24 Mb/s; 36 Mb/s; 54 Mb/s&#xA;                  Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s&#xA;                  Mode:Master&#xA;                  Extra:tsf=000001d780c847a5&#xA;                  Extra: Last beacon: 4132ms ago&#xA;                  IE: Unknown: 000B496E7465726E65745F4230&#xA;                  IE: Unknown: 010882848B962430486C&#xA;                  IE: Unknown: 030101&#xA;                  IE: Unknown: 2A0104&#xA;                  IE: Unknown: 2F0104&#xA;                  IE: IEEE 802.11i/WPA2 Version 1&#xA;                      Group Cipher : CCMP&#xA;                      Pairwise Ciphers (1) : CCMP&#xA;                      Authentication Suites (1) : PSK&#xA;                  IE: Unknown: 32040C121860&#xA;                  IE: Unknown: 0B050200140000&#xA;                  IE: Unknown: 2D1AAC181FFFFF000000000000000000000000000000000000000000&#xA;                  IE: Unknown: 3D1601000400000000000000000000000000000000000000&#xA;                  IE: Unknown: 7F03000008&#xA;                  IE: Unknown: DD860050F204104A0001101044000102103B0001031047001097527829238BBD6979A4F2FC6944A83B102100094D69747261537461721023000C564D47313331322D423330421024000C564D47313331322D4233304210420007393633363847571054000800060050F20400011011000C564D47313331322D42333042100800020084103C000101&#xA;                  IE: Unknown: DD090010180202000C0000&#xA;                  IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00&#xA;             Cell 02 - Address: 00:4F:62:26:BB:95&#xA;                  Channel:11&#xA;                  Frequency:2.462 GHz (Channel 11)&#xA;                  Quality=35/70  Signal level=-75 dBm  &#xA;                  Encryption key:on&#xA;                  ESSID:&quot;Atelier-3&quot;&#xA;                  Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                            9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                  Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                  Mode:Master&#xA;                  Extra:tsf=00000024b85df320&#xA;                  Extra: Last beacon: 4612ms ago&#xA;                  IE: Unknown: 00094174656C6965722D33&#xA;                  IE: Unknown: 010882848B960C121824&#xA;                  IE: Unknown: 03010B&#xA;                  IE: Unknown: 2A0100&#xA;                  IE: Unknown: 32043048606C&#xA;                  IE: Unknown: DD0700E04C01020300&#xA;             Cell 03 - Address: F0:9F:C2:2A:5B:AD&#xA;                  Channel:11&#xA;                  Frequency:2.462 GHz (Channel 11)&#xA;                  Quality=51/70  Signal level=-59 dBm  &#xA;                  Encryption key:on&#xA;                  ESSID:&quot;Atelier-2&quot;&#xA;                  Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s&#xA;                            9 Mb/s; 12 Mb/s; 18 Mb/s&#xA;                  Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s&#xA;                  Mode:Master&#xA;                  Extra:tsf=0000015f1a1f93b8&#xA;                  Extra: Last beacon: 4612ms ago&#xA;                  IE: Unknown: 00094174656C6965722D32&#xA;                  IE: Unknown: 010882848B968C129824&#xA;                  IE: Unknown: 03010B&#xA;                  IE: Unknown: 050400010004&#xA;                  IE: Unknown: 2A0100&#xA;                  IE: Unknown: 3204B048606C&#xA;                  IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00&#xA;                  IE: Unknown: DD0900037F01010000FF7F&#xA;                  IE: Unknown: DD1300156D00010100010227E58106F09FC2295BAD&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2818" LastEditorUserId="2818" LastEditDate="2017-05-17T12:16:04.463" LastActivityDate="2019-05-08T02:02:00.397" Title="Ralink RT3070 driver problem" Tags="|wifi|drivers|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="11816" PostTypeId="1" CreationDate="2017-05-06T17:08:23.417" Score="0" ViewCount="667" Body="&lt;p&gt;I have an older PC with 2 core AMD 64 bit processors. Your specs seem to call for an Intel i3 processor as the minimum. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know.&lt;/p&gt;&#xA;" OwnerUserId="9625" LastActivityDate="2017-05-21T08:58:47.823" Title="How is your support for older 64 bit AMD processors?" Tags="|amd|cpu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11817" PostTypeId="2" ParentId="11809" CreationDate="2017-05-06T17:30:29.530" Score="0" Body="&lt;p&gt;There was a missing symlink. You can solve it this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@host:~$ cd /usr/lib&#xA;user@host:/usr/lib$ sudo ln -s vdpau/libvdpau_nvidia.so.304.135 libvdpau.so.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="643" LastEditorUserId="578" LastEditDate="2017-05-06T21:01:45.650" LastActivityDate="2017-05-06T21:01:45.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11819" PostTypeId="1" CreationDate="2017-05-06T19:15:18.587" Score="3" ViewCount="311" Body="&lt;p&gt;When I tag a file with a color in Pantheon Files, where is the tag recorded?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rM9RA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rM9RA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guessed it may be stored in a hidden file in the same directory (similar to what Windows and macOS do), but I did not find such file.&lt;/p&gt;&#xA;" OwnerUserId="9627" LastActivityDate="2017-05-06T20:57:36.047" Title="How does Pantheon Files store color tags?" Tags="|pantheon-files|metadata|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11821" PostTypeId="2" ParentId="11819" CreationDate="2017-05-06T20:57:36.047" Score="2" Body="&lt;p&gt;The file-color associations are stored in the &lt;code&gt;~/.config/marlin/marlin.db&lt;/code&gt; sqlite database.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should answer your question as well: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7963/how-can-i-change-label-color-for-any-entry-in-files-using-scripts&quot;&gt;How can I change label color for any entry in Files, using scripts?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-06T20:57:36.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11822" PostTypeId="2" ParentId="11816" CreationDate="2017-05-06T20:58:45.767" Score="3" Body="&lt;p&gt;This is kind of subjective but actually there is no problem at all running elementary OS 0.4 loki on 2 core AMD 64 bit if you have enough RAM (4-8 GB)&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-06T20:58:45.767" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11824" PostTypeId="2" ParentId="8597" CreationDate="2017-05-07T07:08:43.770" Score="0" Body="&lt;p&gt;Upgrading NVidia driver to latest ver. 375 resolved a similar issue for me. don't know if you're running nvidia card&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-07T07:08:43.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11825" PostTypeId="1" CreationDate="2017-05-07T08:38:37.107" Score="0" ViewCount="303" Body="&lt;p&gt;I have had a lot of problems installing Dropbox on elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;I finally did it, but now I can't log in to Dropbox. When I click the &amp;quot;Sign In&amp;quot; button, nothing happens. However, the &amp;quot;Preferences&amp;quot; button is working.&lt;/p&gt;&#xA;&lt;p&gt;How can I get Dropbox to properly work on my computer?&lt;/p&gt;&#xA;" OwnerUserId="9632" LastEditorUserId="25612" LastEditDate="2023-04-15T06:23:45.043" LastActivityDate="2024-01-10T09:00:55.120" Title="Dropbox &quot;sign in&quot; problem" Tags="|dropbox|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11826" PostTypeId="2" ParentId="11815" CreationDate="2017-05-07T11:02:17.750" Score="1" Body="&lt;p&gt;Use dpkg to install .deb packages. In your case,&lt;br&gt;&#xA;&lt;code&gt;sudo dpkg -i firmware-ralink_0.43_all.deb&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-07T11:02:17.750" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11827" PostTypeId="1" CreationDate="2017-05-07T14:26:15.183" Score="0" ViewCount="185" Body="&lt;p&gt;I used to paste clicking the middle mouse button but it has stopped working since some days. Why? Can I reactivate it?&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2017-05-08T06:57:19.087" Title="Paste with middle mouse stop working" Tags="|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11828" PostTypeId="1" AcceptedAnswerId="11831" CreationDate="2017-05-07T17:12:39.013" Score="1" ViewCount="345" Body="&lt;p&gt;I wanted to create an Inbox webapp. I tried epiphany and chromium but I wasnt satisfied with both.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I want to delete them but I dont know where to find the .desktop files?&#xA;Can anyone give the locations?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="9580" LastEditorUserId="45" LastEditDate="2017-05-07T21:28:51.843" LastActivityDate="2017-06-12T15:10:31.503" Title="Where do I find find web apps' .desktop files?" Tags="|app-shortcuts|epiphany|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11829" PostTypeId="1" CreationDate="2017-05-07T17:42:48.257" Score="1" ViewCount="461" Body="&lt;p&gt;Youtube.com isn't working properly. I can watch embedded videos normally, but if I go to the homepage or try to watch a video on youtube, this is all that shows up. Tried turning off the adblocker with no results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w99Pj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w99Pj.png&quot; alt=&quot;Only the top bar appears.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've looked around and I haven't seen this issue anywhere. Anyone have any idea what's going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I signed out of Google and it turns out youtube.com works while signed out. &#xA;But this created another problem. I don't know if it's related to the new Google login design but after I put my password in, the next page is just blank and it doesn't log me in.&lt;/p&gt;&#xA;" OwnerUserId="9635" LastEditorUserId="9635" LastEditDate="2017-05-09T20:06:39.467" LastActivityDate="2017-09-25T05:18:04.640" Title="Youtube homepage doesn't work" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11830" PostTypeId="2" ParentId="4425" CreationDate="2017-05-07T19:39:02.127" Score="2" Body="&lt;p&gt;I had the same problem with Visual Studio Code, except that I'm using Loki, but I don't see why it won't work with Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;code&gt;/usr/share/themes/elementary/gtk-3.0&lt;/code&gt; and add this inside &lt;code&gt;apps.css&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.header-bar.default-decoration {&#xA;    padding-top: 2px;&#xA;    padding-bottom: 2px;&#xA;}&#xA;&#xA;.header-bar.default-decoration .button.titlebutton {&#xA;    padding-top: 2px;&#xA;    padding-bottom: 2px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just play with the padding to get the desired height.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not forget to restart Gala, after you've edited the file.&#xA;&lt;strong&gt;Not sure why, but some apps such as Terminal and File Manager won't get affected.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Source : &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?pid=1518845#p1518845&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?pid=1518845#p1518845&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This trick doesn't work with GTK3.18+, so if you're using 3.19 or 3.20, please use this css code instead.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/* shrink headerbars */&#xA;headerbar {&#xA;    min-height: 0px;&#xA;    padding-left: 2px; /* same as childrens vertical margins for nicer proportions */&#xA;    padding-right: 2px;&#xA;    background-color: #2d2d2d;&#xA;}&#xA;&#xA;headerbar entry,&#xA;headerbar spinbutton,&#xA;headerbar button,&#xA;headerbar separator {&#xA;    margin-top: 0px; /* same as headerbar side padding for nicer proportions */&#xA;    margin-bottom: 0px;&#xA;}&#xA;&#xA;/* shrink ssd titlebars */&#xA;.default-decoration {&#xA;    min-height: 0; /* let the entry and button drive the titlebar size */&#xA;    padding: 0px&#xA;    background-color: #2d2d2d;&#xA;}&#xA;&#xA;.default-decoration .titlebutton {&#xA;    min-height: 0px; /* tweak these two props to reduce button size */&#xA;    min-width: 0px;&#xA;}&#xA;&#xA;window.ssd headerbar.titlebar {&#xA;    padding-top: 3px;&#xA;    padding-bottom: 3px;&#xA;    min-height: 0;&#xA;}&#xA;&#xA;window.ssd headerbar.titlebar button.titlebutton {&#xA;    padding-top: 3px;&#xA;    padding-bottom:3px;&#xA;    min-height: 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;https://ogbe.net/blog/gnome_titles.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ogbe.net/blog/gnome_titles.html&lt;/a&gt; &amp;amp; &lt;a href=&quot;https://www.reddit.com/r/gnome/comments/46gplm/does_anyone_know_how_to_decrease_titlebar_height/?sort=old&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/gnome/comments/46gplm/does_anyone_know_how_to_decrease_titlebar_height/?sort=old&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9623" LastEditorUserId="9623" LastEditDate="2017-05-08T14:23:01.620" LastActivityDate="2017-05-08T14:23:01.620" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11831" PostTypeId="2" ParentId="11828" CreationDate="2017-05-07T20:28:05.320" Score="4" Body="&lt;p&gt;You will find your &lt;code&gt;.desktop&lt;/code&gt; files under &lt;code&gt;~/.local/share/applications/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-07T20:28:05.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11832" PostTypeId="2" ParentId="11800" CreationDate="2017-05-07T20:31:57.523" Score="1" Body="&lt;p&gt;You might want to create a script and add it as a custom startup command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/bin/start_xcaliber.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;xcaliber --bR=256 --bG=256 --bB=212 --gR=1.04 --gG=0.9600000000000001 --gB=1.01&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-07T20:31:57.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11833" PostTypeId="2" ParentId="11828" CreationDate="2017-05-07T20:36:15.120" Score="0" Body="&lt;p&gt;You will also find them in /usr/share/applications&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-07T20:36:15.120" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11834" PostTypeId="2" ParentId="11773" CreationDate="2017-05-08T02:31:46.963" Score="1" Body="&lt;p&gt;Used my iPhone to get a temporary Internet connection, and found this site:&#xA;&lt;a href=&quot;http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Used the Linux drivers for my ASUS 1900 AC68 USB device and worked on the first try.  Before I updated the driver, I performed all of the OS updates through my iPhone, just in case that makes a difference.  &lt;/p&gt;&#xA;" OwnerUserId="9636" LastActivityDate="2017-05-08T02:31:46.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11835" PostTypeId="2" ParentId="10288" CreationDate="2017-05-08T02:34:32.007" Score="1" Body="&lt;p&gt;Used my iPhone to get a temporary Internet connection, and found this site: &lt;a href=&quot;http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.edimax.com/edimax/download/download/data/edimax/global/download/for_home/wireless_adapters/wireless_adapters_ac1750_dual-band/ew-7833uac&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Used the Linux drivers for my ASUS 1900 AC68 USB device and worked on the first try. Before I updated the driver, I performed all of the OS updates through my iPhone, just in case that makes a difference.&lt;/p&gt;&#xA;" OwnerUserId="9636" LastActivityDate="2017-05-08T02:34:32.007" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11836" PostTypeId="1" CreationDate="2017-05-08T02:38:10.080" Score="1" ViewCount="137" Body="&lt;p&gt;the bluetooth was functional just after Loki installed, but after run 'apt upgrade' bluetooth goes not work. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;press discover  device gets nothing&lt;/li&gt;&#xA;&lt;li&gt;press &quot;Bluetooth Settings&quot; get below window&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9IAw6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9IAw6.png&quot; alt=&quot;bluetooth settings&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;press the + button gets no respond. (was ok after os installed)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&#xA;ken@element:~$ sudo service bluetooth status&#xA;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)&#xA;   Active: active (running) since Fri 2017-05-05 10:42:39 CST; 2 days ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 1112 (bluetoothd)&#xA;   Status: &quot;Running&quot;&#xA;   CGroup: /system.slice/bluetooth.service&#xA;           └─1112 /usr/lib/bluetooth/bluetoothd&#xA;&#xA;May 08 09:30:14 element bluetoothd[1112]: Not enough free handles to register service&#xA;May 08 09:30:14 element bluetoothd[1112]: Not enough free handles to register service&#xA;May 08 09:30:14 element bluetoothd[1112]: Current Time Service could not be registered&#xA;May 08 09:30:14 element bluetoothd[1112]: gatt-time-server: Input/output error (5)&#xA;May 08 09:30:14 element bluetoothd[1112]: Not enough free handles to register service&#xA;May 08 09:30:14 element bluetoothd[1112]: Not enough free handles to register service&#xA;May 08 09:30:14 element bluetoothd[1112]: Sap driver initialization failed.&#xA;May 08 09:30:14 element bluetoothd[1112]: sap-server: Operation not permitted (1)&#xA;May 08 09:30:14 element bluetoothd[1112]: Endpoint registered: sender=:1.52 path=/MediaEndpoint/A2DPSource&#xA;May 08 09:30:14 element bluetoothd[1112]: Endpoint registered: sender=:1.52 path=/MediaEndpoint/A2DPSink&#xA;ken@element:~$ hciconfig&#xA;hci0:   Type: BR/EDR  Bus: USB&#xA;    BD Address: 4C:BB:58:DE:55:55  ACL MTU: 1022:8  SCO MTU: 183:5&#xA;    UP RUNNING PSCAN ISCAN &#xA;    RX bytes:1304 acl:0 sco:0 events:86 errors:0&#xA;    TX bytes:3213 acl:0 sco:0 commands:86 errors:0&#xA;&#xA;ken@element:~$ rfkill list&#xA;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: dell-wifi: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: dell-bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;5: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&lt;pre&gt;&#xA;$ lsusb; dmesg | egrep -i 'blue|firm'&#xA;Bus 001 Device 004: ID 0cf3:e005 Atheros Communications, Inc. &#xA;Bus 001 Device 002: ID 8087:8001 Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 002 Device 003: ID 14cd:8601 Super Top &#xA;Bus 002 Device 002: ID 17ef:6025 Lenovo ThinkPad Travel Mouse&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;[    0.174576] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored&#xA;[    3.626421] Bluetooth: Core ver 2.21&#xA;[    3.626437] Bluetooth: HCI device and connection manager initialized&#xA;[    3.626441] Bluetooth: HCI socket layer initialized&#xA;[    3.626444] Bluetooth: L2CAP socket layer initialized&#xA;[    3.626451] Bluetooth: SCO socket layer initialized&#xA;[   14.824930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   14.824932] Bluetooth: BNEP filters: protocol multicast&#xA;[   14.824937] Bluetooth: BNEP socket layer initialized&#xA;[   21.056354] Bluetooth: RFCOMM TTY layer initialized&#xA;[   21.056361] Bluetooth: RFCOMM socket layer initialized&#xA;[   21.056364] Bluetooth: RFCOMM ver 1.11&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&lt;pre&gt;&#xA;ken@element:~$ lsmod | grep 'ath3k|btusb'&#xA;ken@element:~$ lsmod | grep 'blue*'&#xA;bluetooth             557056  32 btrtl,btintel,bnep,btbcm,rfcomm,ath3k,btusb&#xA;&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9438" LastEditorUserId="9438" LastEditDate="2017-05-31T07:02:01.740" LastActivityDate="2017-05-31T07:02:01.740" Title="Bluetooth not function after apt upgrade" Tags="|bluetooth|" AnswerCount="0" CommentCount="11" ContentLicense="CC BY-SA 3.0" />
  <row Id="11837" PostTypeId="2" ParentId="11827" CreationDate="2017-05-08T06:57:19.087" Score="3" Body="&lt;p&gt;This is apparently an upstream Ubuntu bug:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1581088&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1581088&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9573" LastActivityDate="2017-05-08T06:57:19.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11838" PostTypeId="2" ParentId="11825" CreationDate="2017-05-08T07:59:17.780" Score="0" Body="&lt;p&gt;I'm using Nautilus Dropbox which works just fine &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nautilus-dropbox&#xA;dropbox autostart y&#xA;dropbox start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;perhaps u have proxy enabled?&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-08T07:59:17.780" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11839" PostTypeId="1" CreationDate="2017-05-08T10:23:09.223" Score="0" ViewCount="1368" Body="&lt;p&gt;From few days ago ever since google rolled out new sign-in page for my account, I can't login to any google service with Epiphany which was my preferred browser. After entering the password I just get stuck with the blank page at &lt;a href=&quot;https://accounts.google.com/signin/v2/challenge/password/empty&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://accounts.google.com/signin/v2/challenge/password/empty&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things work in Chromium and Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking around the web, there seems to be a bug originally tracked and fixed yesterday at &lt;a href=&quot;https://bugs.webkit.org/show_bug.cgi?id=171770&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org/show_bug.cgi?id=171770&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm curious does anyone know when will we get this fix in elementary OS as I'd rather just stick with Epiphany instead of just changing the browser because I can't sign in to google?&lt;/p&gt;&#xA;" OwnerUserId="9639" LastActivityDate="2023-12-30T18:04:10.610" Title="Epiphany - Can't login to Google with new google sign-in page" Tags="|epiphany|web-browser|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11840" PostTypeId="1" CreationDate="2017-05-08T11:12:28.340" Score="3" ViewCount="515" Body="&lt;p&gt;I reinstalled Elementary and after install it asks me to restart, and when it restarts a blank screen. I clicked esc, arrow down and up as suggested in other threads, no help. I reinstalled it the second time, maybe something went wrong. Same result. Then I reinstalled it with USB drive because the first two install was from DVD. Same result. I was able to install Elementary couple of months ago and I'm using the same (latest) image. What am I doing wrong? Why am I getting the blank screen and how can I fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: 4th installation with the same result, tried to untick some options at the installation process (like third party software), it did not help.&lt;/p&gt;&#xA;" OwnerUserId="8059" LastEditorUserId="8059" LastEditDate="2017-05-08T11:57:11.790" LastActivityDate="2024-01-22T03:05:55.663" Title="Blank screen after installation, please help!" Tags="|release-loki|boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11841" PostTypeId="1" CreationDate="2017-05-08T12:44:04.230" Score="0" ViewCount="737" Body="&lt;p&gt;when will elementary OS get kernel 4.10 as part of the default installation?&lt;/p&gt;&#xA;" OwnerUserId="9640" LastActivityDate="2017-05-13T06:25:01.937" Title="When will elementary OS get Linux Kernel 4.10?" Tags="|kernel|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11842" PostTypeId="2" ParentId="1167" CreationDate="2017-05-08T12:46:27.477" Score="1" Body="&lt;p&gt;It's seems like u have problem with your Internet. I download the iso with very bad WiFi signal and keep disconnecting after for awhile, but i can connect again and resume download until 100% and not corrupted. Maybe u better download with torrent method &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you &lt;/p&gt;&#xA;" OwnerUserId="9641" LastActivityDate="2017-05-08T12:46:27.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11843" PostTypeId="2" ParentId="11841" CreationDate="2017-05-08T14:19:23.600" Score="1" Body="&lt;p&gt;It is not at all likely that 0.4 loki gets kernel 4.10 as the default kernel. However, you can install it via &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-image-generic-hwe-16.04-edge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-08T14:19:23.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11844" PostTypeId="1" CreationDate="2017-05-08T15:24:55.840" Score="3" ViewCount="5796" Body="&lt;p&gt;Recently installed Elementary OS over my Ubuntu 16.04 LTS. Have been having a bit of trouble getting docker installed. Not much information out there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried googling, and found a few hits such as &lt;a href=&quot;https://gist.github.com/ChrisTimperley/17d5bf0276672367e86081fa74db4353&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/ChrisTimperley/17d5bf0276672367e86081fa74db4353&lt;/a&gt;, but nothing i've tried worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="2861" LastActivityDate="2021-12-02T12:10:21.670" Title="Installing Docker on Elementary OS Loki" Tags="|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11847" PostTypeId="2" ParentId="11029" CreationDate="2017-05-09T00:27:13.383" Score="1" Body="&lt;p&gt;The mouse becomes unresponsive when changing applications/windows. &#xA;Apparently, this bug is not specific to Pantheon. I've faced the same issue on Ubuntu 17.10. &lt;strong&gt;Removing the Nvidia-304 driver fixes it&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.com.br/translate?sl=pt&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=pt-BR&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fwww.diolinux.com.br%2F2015%2F09%2Fcomo-instalar-drivers-de-video-no-ubuntu-linux.html&amp;amp;edit-text=&amp;amp;act=url&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; is a good tutorial for installing the correct Nvidia drivers on Ubuntu and derivatives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One way I found to get around, without uninstalling the Nvidia-304 driver, is by &lt;strong&gt;changing to the desired application/window with alt + tab&lt;/strong&gt;. The mouse click shall work on the newly selected window.&lt;/p&gt;&#xA;" OwnerUserId="9644" LastEditorUserId="9644" LastEditDate="2018-01-19T17:03:35.380" LastActivityDate="2018-01-19T17:03:35.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11849" PostTypeId="1" CreationDate="2017-05-09T05:35:47.607" Score="9" ViewCount="11014" Body="&lt;h1&gt;SOLVED 3/3&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;solutions + screen caps below&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Tried to find a solution to this problem reading around but no one else &#xA;mentioned these so posting it here considering how easily it's fixed.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Problem #1&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Bluetooth Device Search window doesn't display any results.&lt;br/&gt;&#xA;For some reason the device results are collapsed leading the user to falsely believe no devices are being detected when in fact they are.&#xA;Simply stretch the window vertically to see the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;BEFORE&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/x66z3.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x66z3.png&quot; alt=&quot;Before&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;AFTER&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ZuFN2.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZuFN2.png&quot; alt=&quot;After&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Problem #2&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;No Bluetooth icon under &lt;em&gt;System Settings&lt;/em&gt;&lt;br/&gt;**&#xA;Missing package seems to resolve this with below command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;sudo apt-get install switchboard-plug-bluetooth&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;FYI: Installed packages &quot;blueman&quot; and &quot;tlp&quot; trying to resolve this but ended up removing them in the end and all works without them.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Problem #3&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Poor bluetooth audio quality with headphones/speakers**&lt;br/&gt;&#xA;Easily solved by updating audio settings.&#xA;By default the audio settings are set to Mono.&#xA;Under &quot;Sound Settings / Mode&quot; drop down menu select &quot;High Fidelity..&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Audio Quality Settings&lt;/strong&gt;&lt;br /&gt;&#xA;Unable to post 3rd screen cap so...&lt;br /&gt;&#xA;i.stack.imgur.com/FdshM.png&lt;/p&gt;&#xA;" OwnerUserId="9648" LastEditorUserId="9648" LastEditDate="2017-05-10T03:31:16.963" LastActivityDate="2017-05-10T03:31:16.963" Title="-- SOLVED -- Bluetooth not detecting using Loki" Tags="|release-loki|bluetooth|audio|" AnswerCount="0" CommentCount="2" ClosedDate="2017-05-12T20:16:28.070" ContentLicense="CC BY-SA 3.0" />
  <row Id="11850" PostTypeId="1" CreationDate="2017-05-09T07:11:23.603" Score="3" ViewCount="656" Body="&lt;p&gt;I'm completely new to elementary OS and Linux in general, I've managed to overcome a few issues so far but this one has me stumped, despite googling all manner of solutions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe (from the manufacturers website) that my Asus UX501V has a Realtek card reader. I've downloaded the Linux driver from here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&amp;amp;PNid=15&amp;amp;PFid=25&amp;amp;Level=4&amp;amp;Conn=3&amp;amp;DownTypeID=3&amp;amp;GetDown=false&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&amp;amp;PNid=15&amp;amp;PFid=25&amp;amp;Level=4&amp;amp;Conn=3&amp;amp;DownTypeID=3&amp;amp;GetDown=false&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've navigated to the folder &lt;code&gt;rts_pstor&lt;/code&gt; and with a right click opened it in terminal. I've then tried a &lt;code&gt;sudo make&lt;/code&gt; command but end up with this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo make&#xA;[sudo] password for aaron:         &#xA;sed &quot;s/RTSX_MK_TIME/`date +%y.%m.%d.%H.%M`/&quot; timestamp.in &amp;gt; timestamp.h&#xA;cp -f ./define.release ./define.h&#xA;make -C /lib/modules/4.4.0-77-generic/build/ SUBDIRS= modules&#xA;make[1]: Entering directory '/usr/src/linux-headers-4.4.0-77-generic'&#xA;make[2]: *** No rule to make target 'arch/x86/entry/syscalls/syscall_32.tbl', needed by 'arch/x86/entry/syscalls/../../include/generated/asm/syscalls_32.h'.  Stop.&#xA;arch/x86/Makefile:199: recipe for target 'archheaders' failed&#xA;make[1]: *** [archheaders] Error 2&#xA;make[1]: Leaving directory '/usr/src/linux-headers-4.4.0-77-generic'&#xA;Makefile:35: recipe for target 'default' failed&#xA;make: *** [default] Error 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is the output of &quot;df -h&quot; incase it's useful and &quot;lspci -v&quot;. (I saw both asked for in another thread, sorry if that's not helpful).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ df -h&#xA;Filesystem                       Size  Used Avail Use% Mounted on&#xA;udev                             5.8G     0  5.8G   0% /dev&#xA;tmpfs                            1.2G  9.6M  1.2G   1% /run&#xA;/dev/mapper/elementary--vg-root  457G   35G  399G   9% /&#xA;tmpfs                            5.9G   95M  5.8G   2% /dev/shm&#xA;tmpfs                            5.0M  4.0K  5.0M   1% /run/lock&#xA;tmpfs                            5.9G     0  5.9G   0% /sys/fs/cgroup&#xA;/dev/nvme0n1p2                   473M  125M  324M  28% /boot&#xA;/dev/nvme0n1p1                   511M  3.4M  508M   1% /boot/efi&#xA;tmpfs                            1.2G   44K  1.2G   1% /run/user/1000&#xA;&#xA;$ lspci -v&#xA;00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM Registers (rev 07)&#xA;    Subsystem: ASUSTeK Computer Inc. Skylake Host Bridge/DRAM Registers&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (x16) (rev 07) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 122&#xA;    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0&#xA;    I/O behind bridge: 0000e000-0000efff&#xA;    Memory behind bridge: dc000000-dd0fffff&#xA;    Prefetchable memory behind bridge: 00000000b0000000-00000000c1ffffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06) (prog-if 00 [VGA controller])&#xA;    Subsystem: ASUSTeK Computer Inc. Skylake Integrated Graphics&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 126&#xA;    Memory at db000000 (64-bit, non-prefetchable) [size=16M]&#xA;    Memory at 70000000 (64-bit, prefetchable) [size=256M]&#xA;    I/O ports at f000 [size=64]&#xA;    Expansion ROM at &amp;lt;unassigned&amp;gt; [disabled]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: i915_bpo&#xA;    Kernel modules: i915_bpo&#xA;&#xA;00:04.0 Signal processing controller: Intel Corporation Skylake Processor Thermal Subsystem (rev 07)&#xA;    Subsystem: ASUSTeK Computer Inc. Skylake Processor Thermal Subsystem&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Memory at dd420000 (64-bit, non-prefetchable) [size=32K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: proc_thermal&#xA;    Kernel modules: processor_thermal_device&#xA;&#xA;00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31) (prog-if 30 [XHCI])&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H USB 3.0 xHCI Controller&#xA;    Flags: bus master, medium devsel, latency 0, IRQ 123&#xA;    Memory at dd410000 (64-bit, non-prefetchable) [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: xhci_hcd&#xA;&#xA;00:14.2 Signal processing controller: Intel Corporation Sunrise Point-H Thermal subsystem (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H Thermal subsystem&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 255&#xA;    Memory at dd438000 (64-bit, non-prefetchable) [size=4K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:15.0 Signal processing controller: Intel Corporation Sunrise Point-H LPSS I2C Controller #0 (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H Serial IO I2C Controller&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Memory at dd437000 (64-bit, non-prefetchable) [size=4K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: intel-lpss&#xA;    Kernel modules: intel_lpss_pci&#xA;&#xA;00:15.1 Signal processing controller: Intel Corporation Sunrise Point-H LPSS I2C Controller #1 (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H Serial IO I2C Controller&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 17&#xA;    Memory at dd436000 (64-bit, non-prefetchable) [size=4K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: intel-lpss&#xA;    Kernel modules: intel_lpss_pci&#xA;&#xA;00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H CSME HECI&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 135&#xA;    Memory at dd435000 (64-bit, non-prefetchable) [size=4K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: mei_me&#xA;    Kernel modules: mei_me&#xA;&#xA;00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31) (prog-if 01 [AHCI 1.0])&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H SATA Controller [AHCI mode]&#xA;    Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 125&#xA;    Memory at dd430000 (32-bit, non-prefetchable) [size=8K]&#xA;    Memory at dd434000 (32-bit, non-prefetchable) [size=256]&#xA;    I/O ports at f090 [size=8]&#xA;    I/O ports at f080 [size=4]&#xA;    I/O ports at f060 [size=32]&#xA;    Memory at dd433000 (32-bit, non-prefetchable) [size=2K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: ahci&#xA;    Kernel modules: ahci&#xA;&#xA;00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 17&#xA;    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0&#xA;    Memory behind bridge: dd300000-dd3fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 18&#xA;    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0&#xA;    Memory behind bridge: dd200000-dd2fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1c.4 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Bus: primary=00, secondary=04, subordinate=3c, sec-latency=0&#xA;    I/O behind bridge: 00002000-00002fff&#xA;    Memory behind bridge: c4000000-da0fffff&#xA;    Prefetchable memory behind bridge: 0000000080000000-00000000a1ffffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1) (prog-if 00 [Normal decode])&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Bus: primary=00, secondary=3d, subordinate=3d, sec-latency=0&#xA;    I/O behind bridge: 0000d000-0000dfff&#xA;    Memory behind bridge: dd100000-dd1fffff&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: pcieport&#xA;    Kernel modules: shpchp&#xA;&#xA;00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H LPC Controller&#xA;    Flags: bus master, medium devsel, latency 0&#xA;&#xA;00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H PMC&#xA;    Flags: bus master, fast devsel, latency 0&#xA;    Memory at dd42c000 (32-bit, non-prefetchable) [size=16K]&#xA;&#xA;00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H HD Audio&#xA;    Flags: bus master, fast devsel, latency 32, IRQ 136&#xA;    Memory at dd428000 (64-bit, non-prefetchable) [size=16K]&#xA;    Memory at dd400000 (64-bit, non-prefetchable) [size=64K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;    Kernel modules: snd_hda_intel&#xA;&#xA;00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)&#xA;    Subsystem: ASUSTeK Computer Inc. Sunrise Point-H SMBus&#xA;    Flags: medium devsel, IRQ 255&#xA;    Memory at dd432000 (64-bit, non-prefetchable) [size=256]&#xA;    I/O ports at f040 [size=32]&#xA;    Kernel modules: i2c_i801&#xA;&#xA;01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)&#xA;    Subsystem: ASUSTeK Computer Inc. GM107M [GeForce GTX 960M]&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 137&#xA;    Memory at dc000000 (32-bit, non-prefetchable) [size=16M]&#xA;    Memory at b0000000 (64-bit, prefetchable) [size=256M]&#xA;    Memory at c0000000 (64-bit, prefetchable) [size=32M]&#xA;    I/O ports at e000 [size=128]&#xA;    [virtual] Expansion ROM at dd000000 [disabled] [size=512K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: nvidia&#xA;    Kernel modules: nvidiafb, nouveau, nvidia_375_drm, nvidia_375&#xA;&#xA;02:00.0 Unassigned class [ff00]: Alcor Micro Device 6621&#xA;    Subsystem: Alcor Micro Device 6621&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 255&#xA;    Memory at dd300000 (64-bit, non-prefetchable) [disabled] [size=256]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;03:00.0 Network controller: Intel Corporation Wireless 7265 (rev 59)&#xA;    Subsystem: Intel Corporation Dual Band Wireless-AC 7265&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 134&#xA;    Memory at dd200000 (64-bit, non-prefetchable) [size=8K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: iwlwifi&#xA;    Kernel modules: iwlwifi, wl&#xA;&#xA;3d:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller (rev 01) (prog-if 02 [NVM Express])&#xA;    Subsystem: Samsung Electronics Co Ltd NVMe SSD Controller&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;    Memory at dd100000 (64-bit, non-prefetchable) [size=16K]&#xA;    I/O ports at d000 [size=256]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: nvme&#xA;    Kernel modules: nvme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help!&lt;/p&gt;&#xA;" OwnerUserId="9649" LastEditorUserId="578" LastEditDate="2017-05-09T08:08:11.003" LastActivityDate="2019-04-21T04:06:15.930" Title="Attempting to install Realtek Card Reader Drivers" Tags="|release-loki|drivers|asus|storage|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11852" PostTypeId="1" CreationDate="2017-05-09T10:24:37.110" Score="6" ViewCount="6455" Body="&lt;p&gt;how can I open a terminal in elementary os? I could do alt+ctrl+t in ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have just installed this os in my system. Please help.&lt;/p&gt;&#xA;" OwnerUserId="9650" LastActivityDate="2017-05-09T11:40:35.043" Title="How can I open a terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11854" PostTypeId="2" ParentId="11852" CreationDate="2017-05-09T11:40:35.043" Score="6" Body="&lt;p&gt;windows key + t&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or in the dock at bottom you will find terminal&lt;/p&gt;&#xA;" OwnerUserId="9651" LastActivityDate="2017-05-09T11:40:35.043" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11855" PostTypeId="2" ParentId="11792" CreationDate="2017-05-09T12:06:45.583" Score="0" Body="&lt;p&gt;I found out how to disable &quot;natural copy paste&quot; in Pantheon terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gsettings set org.pantheon.terminal.settings natural-copy-paste false&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That solves one problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl-W+ and W- only zooms in and out. Does not change window proportions&lt;/p&gt;&#xA;" OwnerUserId="9370" LastActivityDate="2017-05-09T12:06:45.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11857" PostTypeId="2" ParentId="8579" CreationDate="2017-05-09T12:47:58.097" Score="0" Body="&lt;p&gt;My guess would be you haven't unmounted the USB storage. Manually unmounting is very important, since unlike windows the actual writing to the storage is not done automatically (although windows is also asking you to remove USB safely)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should try clicking the &quot;Eject&quot; button if you are using file explorer&#xA;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;umount /mnt/&amp;lt;add you usb folder here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;from your terminal&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-09T12:47:58.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11859" PostTypeId="2" ParentId="2554" CreationDate="2017-05-09T13:58:11.670" Score="-1" Body="&lt;p&gt;I use Classic Theme Restorer which provides a lot of customization.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QwoBw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QwoBw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-05-09T13:58:11.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11861" PostTypeId="1" CreationDate="2017-05-09T18:03:43.720" Score="2" ViewCount="161" Body="&lt;p&gt;I have Elementary installed and created an account for my son. I went into parental controls as admin hoping I could set restrictions for him on browsing or searches. There is nothing there other than adding restricted sites. &#xA;How can I make the surfing experience a safe one, other than me sitting there the entire time.&lt;/p&gt;&#xA;" OwnerUserId="9654" LastActivityDate="2017-05-11T17:16:58.307" Title="Can I setup safe surfing in Epiphany?" Tags="|internet-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11862" PostTypeId="2" ParentId="11861" CreationDate="2017-05-09T19:05:33.607" Score="1" Body="&lt;p&gt;I suggest looking at Parental Controls in the system settings. You can restrict the use of epiphany but you have to manually enter websites that cannot be accessed. It's not perfect, but it's there.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-09T19:05:33.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11863" PostTypeId="1" CreationDate="2017-05-09T20:27:36.880" Score="0" ViewCount="534" Body="&lt;p&gt;my wifi adapter is &lt;strong&gt;Intel® Dual Band Wireless-AC 3168&lt;/strong&gt;&#xA;and wifi is not working . i searched for my adapter driver on intel site and found this :&lt;a href=&quot;http://www.intel.in/content/www/in/en/support/network-and-i-o/wireless-networking/000005511.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.intel.in/content/www/in/en/support/network-and-i-o/wireless-networking/000005511.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so according to intel website i need kernel 4.6 atleast to enable my wifi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;what option i tried and failed&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;option1&lt;/strong&gt;.&#xA;tried to manually update kernel(Linux viking-HP-Pavilion-Notebook 4.4.0-36-generic #55-Ubuntu SMP Thu Aug 11 18:01:55 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux) using commands&#xA;wget &lt;a href=&quot;http://in4serv.com.br/backup/kernel-4.6.2&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://in4serv.com.br/backup/kernel-4.6.2&lt;/a&gt;&#xA;sudo chmod +x kernel-4.6.2&#xA;./kernel-4.6.2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it installed the kernel but i am unable get it running ..even tried the advanced boot option .system was still running 4.4 kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;option2 :&lt;/strong&gt;&#xA;used ukuu kernel udate utility and installed latest kernels successfully but not able to get anyone of them running .system still boots using 4.4 kernel.&#xA;the advanced boot option does not shows the latest installed kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;option3:&lt;/strong&gt; &#xA;downloaded the driver firmware files from intel website (iwlwifi-3168-ucode-22.361476.0.tgz) and tried to copy it to /lib/firmware but unable to do so..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so i am stuck with 4.4 kernel and unable to install driver so wifi is not working&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;any help is highly appreciated&lt;/strong&gt; as i wasted lots of hours to get it work but of no use.. &lt;/p&gt;&#xA;" OwnerUserId="9656" LastActivityDate="2024-04-06T03:07:35.933" Title="wifi not working..kernel update not working" Tags="|wifi|kernel|intel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11864" PostTypeId="2" ParentId="11863" CreationDate="2017-05-09T20:44:34.223" Score="0" Body="&lt;p&gt;In a terminal window &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-image-extra-virtual-hwe-16.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-09T20:44:34.223" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11865" PostTypeId="1" CreationDate="2017-05-10T03:44:41.950" Score="0" ViewCount="78" Body="&lt;p&gt;elementary OS 0.4 Loki&#xA;AppCenter shows FontViewer v3.20.2 as installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is no icon available under &quot;Applications&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although can be searched and launched; was wondering if there is a appropriate way to add the missing icon to appropriate / intuitive location for example under &quot;System Settings&quot;&lt;/p&gt;&#xA;" OwnerUserId="9648" LastActivityDate="2017-07-10T21:51:49.107" Title="FontViewer v3.20.2 missing icon from &quot;Applications&quot; menu" Tags="|applications|icons|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11868" PostTypeId="1" CreationDate="2017-05-10T09:10:09.017" Score="2" ViewCount="1681" Body="&lt;p&gt;I was impatiently changing docks from plank to cairo-dock to docky.&#xA;Eventually plank kept turning up so I purged it; the impatience bit meant that  I didn't scan what else would be uninstalled or purged.&#xA;The end result is the login splash screen is fine, and password is accepted, but there's no wingpanel no dock just the wallpaper.&#xA;I tried using terminal to do all updates and upgrades hoping the missing bits would  be re-installed but I was wrong.&#xA;Pantheon is the latest it's a problem with gtk or access to filesystems I have ruined.&#xA;Any help appreciated.&#xA;I can be more specific  - I hope - if someone asks me for specific info.&#xA;Thanks for having this Forum.&#xA;Michael.&lt;/p&gt;&#xA;" OwnerUserId="9665" LastEditorUserId="6398" LastEditDate="2017-05-10T16:53:12.293" LastActivityDate="2023-10-10T20:08:20.357" Title="How to reinstall plank and wingpanel from terminal?" Tags="|wingpanel|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11869" PostTypeId="1" CreationDate="2017-05-10T10:06:55.830" Score="-1" ViewCount="109" Body="&lt;p&gt;I have installed updates and then my system hanged. SO I forced to shutdown. It restarted and worked fine. Again, it hanged for a while so I forced to shutdown by pressing the power button. restarted and it is going to emergency mode and asking me to repair. it is simply terminal mode. I don't have any idea to repair.&lt;/p&gt;&#xA;" OwnerUserId="9666" LastActivityDate="2017-05-10T20:54:05.673" Title="my system is not booting" Tags="|boot|" AnswerCount="1" CommentCount="0" ClosedDate="2017-05-17T16:19:06.790" ContentLicense="CC BY-SA 3.0" />
  <row Id="11872" PostTypeId="2" ParentId="11868" CreationDate="2017-05-10T16:53:03.950" Score="4" Body="&lt;p&gt;Try in a terminal window&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wingpanel plank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-10T16:53:03.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11874" PostTypeId="2" ParentId="11869" CreationDate="2017-05-10T20:54:05.673" Score="1" Body="&lt;p&gt;I installed the Elementary OS again. I installed all updates and restarted the system. Now, it works fine. However, appcentre may hang and i chose force quit option , then start the appcentre again. Thank god, it is working. I have spent lot of hours on this. I installed wine and installed chessmaster program , it is working. I could not install chessmaster in windows 10. SO, i chose linux and I found elementary os in one webpage. Now, everything works.&lt;/p&gt;&#xA;" OwnerUserId="9650" LastActivityDate="2017-05-10T20:54:05.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11875" PostTypeId="1" AcceptedAnswerId="11898" CreationDate="2017-05-11T02:48:21.400" Score="1" ViewCount="710" Body="&lt;p&gt;This seems to be a recurring question on this forum, but I haven't seen an answer (other than rebooting) that solves the problem.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case, the wingpanel shows for a second, looks like it is trying hard to push down from the top of the screen, then, after a few attempts dies a sad and lonely death.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is what terminal reports when attempting to run wingpanel: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wingpanel&#xA;&#xA;(wingpanel:5077): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2045:14: 'min-height' is not a valid property name&#xA;&#xA;(wingpanel:5077): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2046:13: 'min-width' is not a valid property name&#xA;&#xA;(wingpanel:5077): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2051:13: 'min-width' is not a valid property name&#xA;[INFO 19:43:29.254521] Application.vala:153: System Panel version: 2.0.2&#xA;[INFO 19:43:29.254562] Application.vala:155: Kernel version: 4.4.0-77-generic&#xA;[FATAL 19:43:29.309470] display_widget_set_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 19:43:29.309798] display_widget_set_icon_name: assertion 'self != NULL' failed&#xA;Error: GDBus.Error:org.freedesktop.login1.NoSuchUser: No user 1002 known or logged in&#xA;Error: GDBus.Error:org.freedesktop.login1.NoSuchUser: No user 1002 known or logged in&#xA;[02:43:29.435759 Gtk-Warning] Theme parsing error: gtk-widgets.css:2045:14: 'min-height' is not a valid property name&#xA;[02:43:29.435789 Gtk-Warning] Theme parsing error: gtk-widgets.css:2046:13: 'min-width' is not a valid property name&#xA;[02:43:29.435816 Gtk-Warning] Theme parsing error: gtk-widgets.css:2051:13: 'min-width' is not a valid property name&#xA;[02:43:29.462108 Critical] string_to_string: assertion 'self != NULL' failed&#xA;[02:43:29.507269 GLib-Critical] g_hash_table_get_keys: assertion 'hash_table != NULL' failed&#xA;[02:43:29.534970 Gtk-Critical] gtk_window_resize: assertion 'width &amp;gt; 0' failed&#xA;[02:43:29.650466 Warning] [DesktopFileInfo] Not Application-type desktop entry&#xA;[02:43:29.652287 Warning] [DesktopFileInfo] Key file contains key 'Hidden' which has a value that cannot be interpreted.&#xA;[02:43:29.698815 Warning] [DesktopFileInfo] Unable to get exec for Other&#xA;[02:43:29.752826 GLib-GObject-Warning] cannot register existing type 'BluetoothServicesObjectManager'&#xA;[02:43:29.752840 GLib-Critical] g_once_init_leave: assertion 'result != 0' failed&#xA;[02:43:29.752848 GLib-GObject-Critical] g_object_new: assertion 'G_TYPE_IS_OBJECT (object_type)' failed&#xA;[02:43:29.752855 GLib-GObject-Critical] g_object_bind_property_full: assertion 'G_IS_OBJECT (source)' failed&#xA;[02:43:29.787003 Info] Tweaks.vala:307: Activating Tweak plug&#xA;[ERROR 19:43:29.854136] [GLib-GIO] Settings schema 'org.pantheon.terminal.settings' does not contain a key named 'opacity'&#xA;Trace/breakpoint trap (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a fix to this missing wingpanel issue?  Without wingpanel, I can't really use the OS.   &lt;/p&gt;&#xA;" OwnerUserId="9489" LastEditorUserId="9489" LastEditDate="2017-05-12T01:14:45.927" LastActivityDate="2017-05-12T20:13:41.093" Title="Wingpanel Disappeared -- And Won't Come Back!" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11876" PostTypeId="2" ParentId="11865" CreationDate="2017-05-11T10:08:00.887" Score="0" Body="&lt;p&gt;This is the solution for Nautilus, but it's the same for any other app:&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2994/why-dont-certain-gnome-apps-show-in-slingshot&quot;&gt;Why don&amp;#39;t certain GNOME apps show in Slingshot?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-05-11T10:08:00.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11877" PostTypeId="1" CreationDate="2017-05-11T10:17:39.853" Score="0" ViewCount="3270" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AsrVT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AsrVT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The picture is the screenshot and you could see the error message. It cannot be copied and so I took screenshot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;any help appreciated. Thanks&lt;/p&gt;&#xA;" OwnerUserId="9650" LastActivityDate="2017-05-15T02:14:12.833" Title="how to install whatsapp?" Tags="|software-installation|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11878" PostTypeId="2" ParentId="11877" CreationDate="2017-05-11T11:47:10.543" Score="2" Body="&lt;p&gt;Download an install chrome  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FxTC6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FxTC6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then go to &lt;a href=&quot;https://chrome.google.com/webstore/category/extensions?hl=en-US&amp;amp;utm_source=chrome-ntp-launcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;Chrome WebStore&lt;/a&gt; and look for &lt;code&gt;Messenger for WhatsApp&lt;/code&gt; and install it. Now go to the &lt;code&gt;Apps&lt;/code&gt; section in Chrome, right click on &lt;code&gt;Messenger for WhatsApp&lt;/code&gt; -&gt; &lt;code&gt;Create shortcuts&lt;/code&gt; -&gt; tick Applications menu -&gt; Close. Start WhatsApp from Applications and pair it using the QR code.  &lt;a href=&quot;https://i.stack.imgur.com/R7EgU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R7EgU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-11T11:47:10.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11881" PostTypeId="2" ParentId="11865" CreationDate="2017-05-11T19:19:57.583" Score="1" Body="&lt;p&gt;I recommend Menulibre&#xA;&lt;a href=&quot;https://smdavis.us/projects/menulibre/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://smdavis.us/projects/menulibre/&lt;/a&gt;&#xA;It's simple GUI to add applications to slingshot and/or change names, icons etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you want to keep simple. Make a .desktop entry in /usr/share/applications.&#xA;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Desktop_entries&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-05-11T19:19:57.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11883" PostTypeId="1" CreationDate="2017-05-12T01:24:06.273" Score="0" ViewCount="1231" Body="&lt;p&gt;We see from &lt;a href=&quot;https://elementaryos.stackexchange.com/q/5547/7356&quot;&gt;this&lt;/a&gt;  that there is interest in using Swift to develop apps for elementary OS. There's also experimental GTK bindings available, but I don't think it's being maintained: &lt;a href=&quot;https://github.com/TomasLinhart/SwiftGtk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/TomasLinhart/SwiftGtk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would love to port some of my stuff over to elementary OS and the OSS community at large, but knowing there isn't official GTK support for Swift is a huge setback. I don't want to switch to Vala because I'd have to rewrite thousands of lines of my existing code, and once you get used to a good IDE with strong support for &lt;em&gt;a language with named parameters&lt;/em&gt; (arguably the best thing about Swift), you never want to go back (code readability skyrockets, in my opinion).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there plans from the elementary OS team to officially support Swift? Or do I need to go pester the GTK folks?&lt;/p&gt;&#xA;" OwnerUserId="7356" LastEditorUserId="308" LastEditDate="2018-08-07T18:11:54.987" LastActivityDate="2021-10-13T08:27:39.217" Title="Swift/GTK Bindings" Tags="|gtk|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11886" PostTypeId="2" ParentId="11877" CreationDate="2017-05-12T07:31:10.397" Score="0" Body="&lt;p&gt;You can try Rambox...it's a multi chat app and whatsapp is also included&#xA;&lt;a href=&quot;http://rambox.pro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://rambox.pro/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2017-05-12T07:31:10.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11889" PostTypeId="2" ParentId="8927" CreationDate="2017-05-12T11:43:47.417" Score="0" Body="&lt;p&gt;You could install &lt;code&gt;pm-utils&lt;/code&gt; (&lt;code&gt;sudo apt install pm-utils&lt;/code&gt;). It worked for me, although it doesn't appear in the power menu, I could hibernate by calling:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo pm-hibernate&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it will hibernate.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2017-05-12T11:43:47.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11890" PostTypeId="2" ParentId="11877" CreationDate="2017-05-12T11:56:37.917" Score="0" Body="&lt;p&gt;After an unsuccessful install of something by a missing dependency using &lt;code&gt;apt&lt;/code&gt; one could use &lt;code&gt;sudo apt install -f&lt;/code&gt; to satisfy all dependency packages needed in order to install other packages. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install &amp;lt;some_package&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dependency not satisfied in the last operation so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install -f&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the dependencies are satisfied and the package &lt;code&gt;&amp;lt;some_package&amp;gt;&lt;/code&gt; is installed properly.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2017-05-12T11:56:37.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11891" PostTypeId="1" CreationDate="2017-05-12T12:21:35.033" Score="1" ViewCount="165" Body="&lt;p&gt;I clicked shutdown and then clicked restart and also tried shutdown. But it is not shutting down. I don't want to force shutdown by the power button. Last time I did that the system files got damaged and I had to reinstall the system. So, what options I have?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even tried command 'shutdown' from the terminal. It is not working too.&lt;/p&gt;&#xA;" OwnerUserId="9650" LastEditorUserId="16827" LastEditDate="2019-01-08T13:16:25.670" LastActivityDate="2019-01-08T13:16:25.670" Title="my system is not restarting" Tags="|system|shutdown|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11892" PostTypeId="2" ParentId="11839" CreationDate="2017-05-12T12:34:37.850" Score="0" Body="&lt;p&gt;Same for me with web-browser. Easy to fix with&#xA;&lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9689" LastEditorUserId="26" LastEditDate="2017-05-17T16:09:18.593" LastActivityDate="2017-05-17T16:09:18.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11893" PostTypeId="2" ParentId="11462" CreationDate="2017-05-12T14:15:33.613" Score="0" Body="&lt;p&gt;It may do to the intel processor. I had similar experience with a laptop with intel processor. What I did was open the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;strong&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&lt;/strong&gt; &#xA;with &lt;strong&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash intel_idle.max_cstate=1&quot;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save it (CTRL+O)&#xA;Exit (CTRL+X)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2017-05-12T14:15:33.613" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11894" PostTypeId="1" AcceptedAnswerId="11895" CreationDate="2017-05-12T17:39:09.863" Score="2" ViewCount="762" Body="&lt;p&gt;I am having some issues with Plank, so I uninstalled it by doing &lt;code&gt;apt remove --purge plank&lt;/code&gt;. After reinstalling it, I could run the dock by starting it on the command line, but it would not start with the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried putting it on the startup applications on Switchboard, but it would not work anyway. How can I make plank startup automatically again on login?&lt;/p&gt;&#xA;" OwnerUserId="9695" LastActivityDate="2018-08-29T22:23:34.640" Title="Plank not starting after reinstall" Tags="|plank|desktop|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11895" PostTypeId="2" ParentId="11894" CreationDate="2017-05-12T17:39:09.863" Score="3" Body="&lt;p&gt;This is controlled via a dconf setting in Loki: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.cerbere monitored-processes&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should contain &lt;code&gt;plank&lt;/code&gt; (the default is &lt;code&gt;['wingpanel', 'plank']&lt;/code&gt;). If plank is not listed, you can just add it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.cerbere monitored-processes &quot;['wingpanel', 'plank']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9695" LastActivityDate="2017-05-12T17:39:09.863" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11896" PostTypeId="1" CreationDate="2017-05-12T18:02:53.527" Score="0" ViewCount="517" Body="&lt;p&gt;I'm new to Linux and today my computer froze while watching youtube. I had to reset using the power button and after the elementary logo when you expect to get the login screen I got stuck with the following nvidia logo-screen:&#xA;(&lt;a href=&quot;https://i.stack.imgur.com/tMZYq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/tMZYq.jpg&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to format my computer, install the drivers from a run package from the official site. But also nvidia-375 and nvidia-381 from the ppa. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way not to get stuck on this screen (that i've found) is to uninstall the nvidia drivers using the grub recovery mode &gt; root shell prompt. Then boot the OS by adding nomodeset in front of quiet splash in the Linux line in grub and then boot. This is ofcourse not a solution, so what should I do? It feels like I've tried everything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a gtx 570 GPU&lt;/p&gt;&#xA;" OwnerUserId="9696" LastActivityDate="2017-07-15T21:37:47.697" Title="Stuck with nvidia boot screen instead of login" Tags="|boot|drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11898" PostTypeId="2" ParentId="11875" CreationDate="2017-05-12T20:13:41.093" Score="2" Body="&lt;p&gt;It looks as though you've installed Elementary Tweaks from an unsupported PPA. To fix the issue, you'll need to uninstall elementary tweaks using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, wingpanel should start working again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can then then remove the incorrect PPA following the instructions found &lt;a href=&quot;https://askubuntu.com/a/310&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still want elementary tweaks installed, you can install the correct PPA from &lt;a href=&quot;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-05-12T20:13:41.093" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11899" PostTypeId="1" AcceptedAnswerId="11900" CreationDate="2017-05-13T00:34:52.353" Score="1" ViewCount="103" Body="&lt;p&gt;With a fresh first install all artikulate would do is show the icon in dock and disapear with no errors or warnings with out starting. So to the terminal I go with &lt;code&gt;sudo apt-get remove artikulate&lt;/code&gt;, then &lt;code&gt;sudo apt-get autoremove artikulate&lt;/code&gt;, then &lt;code&gt;sudo apt-get update&lt;/code&gt;, then &lt;code&gt;sudo apt-get install artikulate&lt;/code&gt;. Finally I go to launch from the terminal, just in case I have issue hoping it would report back to me whats going on and this is what I get.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ artikulate&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(artikulate:5694): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(artikulate:5694): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(artikulate:5694): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(artikulate:5694): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;log_liblearner: Database path:  &quot;/home/tw/.local/share/artikulate/learnerdata.db&quot;&#xA;log_liblearner: No last active profile found, falling back to first found profile&#xA;There is no subdirectory &quot;skeletons&quot; in directory  &quot;.&quot;  cannot load skeletons.&#xA;There is no subdirectory &quot;courses&quot; in directory  &quot;.&quot;  cannot load courses.&#xA;QQmlApplicationEngine failed to load component&#xA;file:///usr/share/artikulate/qml/Main.qml:24 module &quot;QtQml.Models&quot; is not installed&#xA;&#xA;KCrash: crashing... crashRecursionCounter = 2&#xA;KCrash: Application Name = artikulate path = /usr/bin pid = 5694&#xA;KCrash: Arguments: /usr/bin/artikulate &#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Although I am not a total noob, I still am not the best at linux. Any recommendations on how to correct this issue would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="9700" LastEditorUserId="578" LastEditDate="2017-05-13T07:24:22.967" LastActivityDate="2023-02-01T21:27:44.860" Title="Whats wrong with artikulate?" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11900" PostTypeId="2" ParentId="11899" CreationDate="2017-05-13T00:46:14.217" Score="1" Body="&lt;p&gt;There's a message on &lt;a href=&quot;https://www.mail-archive.com/kde-bugs-dist@kde.org/msg33041.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this mailing list&lt;/a&gt; that seems to describe your issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would seem that the solution should be to install &quot;qml-module-qtqml-models2&quot;. You could do so with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install qml-module-qtqml-models2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-05-13T00:46:14.217" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11902" PostTypeId="1" CreationDate="2017-05-13T02:07:30.287" Score="1" ViewCount="415" Body="&lt;p&gt;&lt;strong&gt;Issue:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded the latest version of EOS today, started the OS up in tryout mode from USB and all works fine, except for audio.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Troubleshoot&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Set my ZOOM UAC-2 audio interface to class compliant mode&lt;/li&gt;&#xA;&lt;li&gt;via terminal: alsamixer, F6 &amp;amp; select ZOOM UAC-2, exit&lt;/li&gt;&#xA;&lt;li&gt;Go to system &gt; sound &amp;amp; check output devices, mutes etc. I see the meters registering sound, but there is no sound coming out of the speakers &amp;amp; headphone&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;What am I missing?&#xA;Any help appreciated. &lt;/p&gt;&#xA;" OwnerUserId="9702" LastActivityDate="2017-05-13T02:07:30.287" Title="ZOOM UAC-2 : No sound" Tags="|sound|audio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11903" PostTypeId="2" ParentId="11841" CreationDate="2017-05-13T06:25:01.937" Score="0" Body="&lt;p&gt;I am running Linux 4.11.0 and 4.10.15 on my eOS Loki. I am using a customized kernel made by Xanmod. You can visit his webpage here: &lt;a href=&quot;https://xanmod.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://xanmod.org/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8274" LastActivityDate="2017-05-13T06:25:01.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11904" PostTypeId="1" AcceptedAnswerId="11906" CreationDate="2017-05-13T06:58:40.707" Score="2" ViewCount="1760" Body="&lt;p&gt;fish Shell doesn't recognize the &lt;strong&gt;node&lt;/strong&gt; command as well as &lt;strong&gt;zsh&lt;/strong&gt; too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the &lt;strong&gt;bash&lt;/strong&gt; does, So How Can I Share &lt;strong&gt;Environment Path&lt;/strong&gt; between all of the Shells&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/b2p5L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b2p5L.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user7862" LastActivityDate="2017-05-13T07:49:29.593" Title="How to Share the environment Paths between Bash, fish and zsh shells" Tags="|bash|fish|zsh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11905" PostTypeId="2" ParentId="10922" CreationDate="2017-05-13T07:34:47.567" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;If you want to keep both desktop environments, you can stay with Cipricius's answer.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If there is a KDE desktop installed and you don't need it you can do in a terminal window&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-desktop plasma-desktop-&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This latter will (re)install the elementary OS Pantheon desktop and remove the KDE Plasma desktop. This can fix some glitches from software libraries incompatibles with elementary OS (display inconsistencies, etc.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-13T07:34:47.567" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11906" PostTypeId="2" ParentId="11904" CreationDate="2017-05-13T07:49:29.593" Score="1" Body="&lt;p&gt;These shells do not use the same configuration files. Normally the &lt;code&gt;PATH&lt;/code&gt; environment variable is set in &lt;code&gt;/etc/profile&lt;/code&gt; and &lt;code&gt;~/.profile&lt;/code&gt; which are files read by &lt;code&gt;bash&lt;/code&gt; (and &lt;code&gt;dash&lt;/code&gt;) but by neither of &lt;code&gt;fish&lt;/code&gt; or &lt;code&gt;zsh&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But you can manually execute your profile files (this sets PATH and does other things as well)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;strong&gt;fish&lt;/strong&gt; you can use the script provided here: &lt;a href=&quot;https://superuser.com/a/447777&quot;&gt;https://superuser.com/a/447777&lt;/a&gt;   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;strong&gt;zsh&lt;/strong&gt; create a &lt;code&gt;~/.zprofile&lt;/code&gt;file with the following contents (and put anything else in &lt;code&gt;~/.profile&lt;/code&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;emulate sh -c '. ~/.profile'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://superuser.com/questions/446925/re-use-profile-for-fish&quot;&gt;https://superuser.com/questions/446925/re-use-profile-for-fish&lt;/a&gt;&#xA;and &lt;a href=&quot;https://superuser.com/questions/187639/zsh-not-hitting-profile&quot;&gt;https://superuser.com/questions/187639/zsh-not-hitting-profile&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-13T07:49:29.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11907" PostTypeId="1" CreationDate="2017-05-13T08:10:28.157" Score="0" ViewCount="55" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wO4MW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wO4MW.png&quot; alt=&quot;http://imgur.com/yOzDWM9&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under System Settings &gt; Desktop, when I click &quot;Custom&quot; in the dropdown box, I get the above window to pick a folder. But I can't seem to choose anything! There is no &quot;open&quot; button. I can't even exit the selection screen. Am i missing something or is this a major bug?&lt;/p&gt;&#xA;" OwnerUserId="9703" LastEditorUserId="578" LastEditDate="2017-05-13T09:30:37.960" LastActivityDate="2017-05-13T09:30:37.960" Title="Can't pick custom folder?" Tags="|settings|pantheon-files|folder|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11908" PostTypeId="2" ParentId="11907" CreationDate="2017-05-13T08:31:17.367" Score="1" Body="&lt;p&gt;I figured out that this was because I edited the GTK settings (org.gnome.settings-daemon.plugins.xsettings).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resetting the schema solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="9703" LastActivityDate="2017-05-13T08:31:17.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11911" PostTypeId="2" ParentId="11883" CreationDate="2017-05-13T12:20:12.957" Score="1" Body="&lt;p&gt;There are currently no plans from elementary to officially support Swift. However, apps submitted to AppCenter are more than welcome to use Swift or any other language so long as they are GTK3 apps. If the GTK3 bindings for Swift are or become usable, Swift apps are more than welcome on the platform.&lt;/p&gt;&#xA;" OwnerUserId="37" LastEditorUserId="308" LastEditDate="2018-08-07T16:37:33.923" LastActivityDate="2018-08-07T16:37:33.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11912" PostTypeId="1" CreationDate="2017-05-13T14:07:15.773" Score="1" ViewCount="2378" Body="&lt;p&gt;I have had a really difficult transition from Windows to Linux for the last month or so I've been toying around with different distros, and with all of them have yet to been able  to install the AMD GPU drivers on any OS! So I am actually going to go in and try Elementary OS this time give it another wack and see if I can go about getting the correct drivers installed correctly. I am running a biostar tb 85 with a I 5 quad core processor 8 gigabytes of RAM and of course my Sapphire Nitro RX 480. On a side note I can't find any of the other drivers for this thing either the chipset included as well as Lan drivers.&lt;/p&gt;&#xA;" OwnerUserId="9707" LastActivityDate="2018-09-10T02:00:34.923" Title="How do I install AMD drivers for rx480 card?" Tags="|graphic-drivers|drivers|intel|amd|radeon|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11915" PostTypeId="1" CreationDate="2017-05-14T05:24:55.080" Score="0" ViewCount="421" Body="&lt;p&gt;How do I add multiple commands to one shortcut?&#xA;Adding something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool getactivewindow windowmove 0 0 &amp;amp;&amp;amp; xdotool getactivewindow windowsize 50% 50%&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;doesn't work, but either command in isolation works. I'm not sure if I'm doing something wrong.&lt;/p&gt;&#xA;" OwnerUserId="9720" LastActivityDate="2017-08-12T08:39:40.560" Title="Multiple commands in one custom keyboard shortcut" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11916" PostTypeId="2" ParentId="11915" CreationDate="2017-05-14T07:06:03.490" Score="1" Body="&lt;p&gt;You can create a script that does the same thing and assign it to the custom shortcut. For instance, &lt;code&gt;~/.local/bin/my_script&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;xdotool getactivewindow windowmove 0 0&#xA;xdotool getactivewindow windowsize 50% 50%&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-14T07:06:03.490" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11917" PostTypeId="2" ParentId="11662" CreationDate="2017-05-14T16:09:36.517" Score="1" Body="&lt;p&gt;This seemed to solve it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo &quot;overlay\naufs&quot; | sudo tee -a /etc/initramfs-tools/modules'&#xA;&#xA;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9489" LastActivityDate="2017-05-14T16:09:36.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11919" PostTypeId="1" CreationDate="2017-05-14T17:44:04.560" Score="1" ViewCount="77" Body="&lt;p&gt;Will my Conroe 2.4 gig winXP work with elementry OS (The first Intel Core 2 Duo branded processor cores, code-named Conroe). I would like to do a reformat / clean install of a Linux OS. &lt;/p&gt;&#xA;" OwnerUserId="9724" LastActivityDate="2017-06-13T19:51:38.997" Title="Will my Conroe 2.4 gig winXP work with elementry OS (The first Intel Core 2 Duo branded processor cores, code-named Conroe)" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11920" PostTypeId="2" ParentId="11919" CreationDate="2017-05-14T19:17:46.633" Score="1" Body="&lt;p&gt;Yes it should, but however you might want to test elementary OS via a key USB before formatting your hard disk.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-14T19:17:46.633" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11921" PostTypeId="1" CreationDate="2017-05-14T22:47:18.717" Score="1" ViewCount="962" Body="&lt;p&gt;I've an ASUS N56JN and brightness shortcut doesn't work. Usually with my laptop I can do it with FN+F5/F6. How can I solve this issue? Is there a way to fix it? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="9726" LastActivityDate="2020-12-26T15:03:20.280" Title="How to set shortcut for brightness" Tags="|keyboard-shortcuts|brightness|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11922" PostTypeId="1" CreationDate="2017-05-15T02:10:24.577" Score="0" ViewCount="875" Body="&lt;p&gt;Yesterday I was tweaking with my themes and icon packs. I removed some default themes and icons ( like hicolor , loginicons etc. ) . Now many icons are missing ( Network Manager icon as well ) . How to get them back ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.I don't want to reinstall the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.If there's an icon pack having all of the icons ( literally ) suggest me please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.If anyone wants to help me out please share their icons folder. ( Location of folder : /usr/share/icons )&lt;/p&gt;&#xA;" OwnerDisplayName="user9314" LastActivityDate="2017-05-15T06:05:22.870" Title="Icons messed up..Please help?" Tags="|pantheon|tweak-tool|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11923" PostTypeId="2" ParentId="11877" CreationDate="2017-05-15T02:14:12.833" Score="0" Body="&lt;p&gt;I don't know if it's still under development but a year (or two) back I came across an unofficial WhatsApp client called &lt;strong&gt;Whatsie&lt;/strong&gt;. I found it to be very useful. You should definitely check it out. &lt;/p&gt;&#xA;" OwnerDisplayName="user9314" LastActivityDate="2017-05-15T02:14:12.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11924" PostTypeId="2" ParentId="11921" CreationDate="2017-05-15T04:47:35.303" Score="1" Body="&lt;p&gt;Use the instructions on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3617/how-can-i-change-keyboard-shortcuts?rq=1&quot;&gt;this page&lt;/a&gt;, but instead go to &lt;code&gt;Custom&lt;/code&gt; and select the &lt;code&gt;+&lt;/code&gt; button to add a new keyboard shortcut.  In the custom command, put &lt;code&gt;xdotool key XF86MonBrightnessDown&lt;/code&gt; or &lt;code&gt;xdotool key XF86MonBrightnessUp&lt;/code&gt;.  Then click where it says &lt;code&gt;Disabled&lt;/code&gt; and key in your key combination.  &lt;/p&gt;&#xA;" OwnerUserId="9489" LastActivityDate="2017-05-15T04:47:35.303" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11925" PostTypeId="2" ParentId="11922" CreationDate="2017-05-15T06:05:22.870" Score="3" Body="&lt;p&gt;This will reinstall the default icons and theme:&lt;br&gt;&#xA;&lt;code&gt;sudo apt install --reinstall elementary-theme elementary-icon-theme elementary-default-settings elementary-desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also try this: System Settings -&gt; About -&gt; Restore Default Settings&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-15T06:05:22.870" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11926" PostTypeId="1" AcceptedAnswerId="12961" CreationDate="2017-05-15T06:24:53.520" Score="2" ViewCount="571" Body="&lt;p&gt;My middle mouse button (the scroll wheel pressed down), after turning off the &lt;code&gt;gnome-tweak&lt;/code&gt; middle click is paste, shows as &lt;code&gt;button 2&lt;/code&gt; in &lt;code&gt;xev&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ButtonPress event, serial 37, synthetic NO, window 0x3400001,&#xA;    root 0x4ee, subw 0x0, time 8879244, (79,71), root:(1759,879),&#xA;    state 0x10, button 2, same_screen YES&#xA;&#xA;ButtonRelease event, serial 37, synthetic NO, window 0x3400001,&#xA;    root 0x4ee, subw 0x0, time 8879452, (79,71), root:(1759,879),&#xA;    state 0x210, button 2, same_screen YES&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It now functions in browsers to open links in a new tab. I want it to show the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed &lt;code&gt;wmctrl&lt;/code&gt; and can &lt;code&gt;show desktop&lt;/code&gt; by typing into terminal &lt;code&gt;wmctrl -k on&lt;/code&gt;.  But I cannot figure out how to associate &lt;code&gt;button 2&lt;/code&gt; with that command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Settings &gt; Keyboard &gt; Shortcuts &gt; Custom, adding the command works, but it is not possible to associate it with the button click.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;code&gt;dconf editor&lt;/code&gt;, I tried using &lt;code&gt;xautomation&lt;/code&gt; and the command &lt;code&gt;xte 'mouseclick 2'&lt;/code&gt;, but that didn't work either (nor did &lt;code&gt;button 2&lt;/code&gt; or &lt;code&gt;'button 2'&lt;/code&gt; or &lt;code&gt;button2&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what the correct binding is for &lt;code&gt;button 2&lt;/code&gt; in &lt;code&gt;dconf editor&lt;/code&gt; or how to get the &lt;code&gt;Settings&lt;/code&gt; menu to accept it?  &lt;/p&gt;&#xA;" OwnerUserId="9489" LastActivityDate="2017-09-08T09:11:57.367" Title="How do I set &quot;button 2&quot; of mouse to &quot;show desktop&quot;" Tags="|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11930" PostTypeId="1" CreationDate="2017-05-15T17:44:21.660" Score="0" ViewCount="1304" Body="&lt;p&gt;I'm new to Linux platform , I needed a clean light weight Linux distro that's what I come up with elementary os . Also it looks really cool . But , the problem is its taking too much time to boot up , previously i had centos in my same vaio laptop , it boot up much faster than elementary os. It took more than half an hour to boot up and shows some failed error message line like ' failed to start show playmouth boot screen' and so many .. I would like to learn and continue to use Linux but it's really annoys.. &#xA;My system is up to date , once got the login screen every things are fine , run smooth and fast ..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the boot analyzed report ..&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  20.063s systemd-rfkill.service&#xA;      8.956s mysql.service&#xA;      7.230s NetworkManager-wait-online.service&#xA;      6.631s dev-sda6.device&#xA;      4.428s ModemManager.service&#xA;      4.008s apache2.service&#xA;      3.641s accounts-daemon.service&#xA;      2.999s grub-common.service&#xA;      2.862s apport.service&#xA;      2.538s irqbalance.service&#xA;      2.418s speech-dispatcher.service&#xA;      2.363s networking.service&#xA;      2.281s lightdm.service&#xA;      2.221s NetworkManager.service&#xA;      1.919s iio-sensor-proxy.service&#xA;      1.898s rsyslog.service&#xA;      1.897s pppd-dns.service&#xA;      1.897s alsa-restore.service&#xA;      1.891s gpu-manager.service&#xA;      1.670s avahi-daemon.service&#xA;      1.491s thermald.service&#xA;      1.285s polkitd.service&#xA;      1.262s systemd-udevd.service&#xA;      1.212s systemd-fsck@dev-disk-by\x2duuid-de73b405\x2dfa90\x2d4959\x2d8046\x2d984a86af0486.service&#xA;      1.189s keyboard-setup.service&#xA;      1.060s systemd-tmpfiles-setup-dev.service&#xA;       885ms apparmor.service&#xA;       853ms systemd-modules-load.service&#xA;       686ms packagekit.service&#xA;       662ms systemd-logind.service&#xA;       657ms systemd-journald.service&#xA;       636ms ondemand.service&#xA;       556ms resolvconf.service&#xA;       440ms dev-mqueue.mount&#xA;       419ms dev-hugepages.mount&#xA;       417ms sys-kernel-debug.mount&#xA;       362ms systemd-tmpfiles-setup.service&#xA;       319ms kmod-static-nodes.service&#xA;       292ms wpa_supplicant.service&#xA;       291ms console-setup.service&#xA;       288ms pantheon-parental-controls.service&#xA;       206ms systemd-user-sessions.service&#xA;       197ms systemd-update-utmp.service&#xA;       192ms colord.service&#xA;       191ms ufw.service&#xA;       180ms bluetooth.service&#xA;       175ms upower.service&#xA;       166ms systemd-udev-trigger.service&#xA;       148ms systemd-journal-flush.service&#xA;       141ms systemd-sysctl.service&#xA;       138ms dev-disk-by\x2duuid-32add840\x2d536f\x2d4dac\x2d84ab\x2d047b6c7c9525.swap&#xA;       134ms setvtrgb.service&#xA;       128ms systemd-remount-fs.service&#xA;       109ms openvpn.service&#xA;       104ms plymouth-read-write.service&#xA;        94ms udisks2.service&#xA;        75ms user@1000.service&#xA;        71ms rc-local.service&#xA;        62ms home.mount&#xA;        57ms systemd-random-seed.service&#xA;        49ms rtkit-daemon.service&#xA;        49ms systemd-timesyncd.service&#xA;        31ms snapd.socket&#xA;        19ms snapd.autoimport.service&#xA;        17ms systemd-backlight@backlight:intel_backlight.service&#xA;        15ms plymouth-start.service&#xA;         5ms ureadahead-stop.service&#xA;         4ms systemd-update-utmp-runlevel.service&#xA;         4ms sys-fs-fuse-connections.mount&#xA;         2ms plymouth-quit-wait.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated... &lt;/p&gt;&#xA;" OwnerUserId="9732" LastEditorUserId="9732" LastEditDate="2017-05-16T06:01:17.970" LastActivityDate="2018-12-08T06:02:50.627" Title="Taking too much time to boot the system..?" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11932" PostTypeId="1" AcceptedAnswerId="11942" CreationDate="2017-05-15T19:01:39.560" Score="0" ViewCount="100" Body="&lt;p&gt;I'm on dual booth with Windows 7, and AppCenter does not update or install anything; it just hangs on &quot;waiting in queue&quot;. There is a working Internet connection, and I have another non-dual boot PC where AppCenter works just fine. Any ideas what I might be doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="8059" LastEditorUserId="84" LastEditDate="2018-05-06T18:11:16.177" LastActivityDate="2018-05-06T18:11:16.177" Title="Dual boot AppCenter not working" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="11933" PostTypeId="1" CreationDate="2017-05-15T22:15:31.293" Score="5" ViewCount="289" Body="&lt;p&gt;In many OS you have the option to press the Menu key when you are inside the terminal. This displays a menu, as if you had right clicked, showing options like copy, paste, cut ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can do this in Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kF3jU.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kF3jU.png&quot; alt=&quot;Menu Key&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9733" LastActivityDate="2019-12-03T12:46:04.503" Title="Menu key in terminal" Tags="|pantheon-terminal|" AnswerCount="3" CommentCount="1" ClosedDate="2019-07-20T17:37:00.237" ContentLicense="CC BY-SA 3.0" />
  <row Id="11934" PostTypeId="2" ParentId="11815" CreationDate="2017-05-15T22:45:28.280" Score="0" Body="&lt;p&gt;This is likely an issue caused by Network Manager enabling wifi power management on its own, to disable do&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i 's/wifi.powersave = 3/wifi.powersave = 2/' /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf&#xA;systemctl restart network-manager.service&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-05-15T22:45:28.280" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11937" PostTypeId="2" ParentId="11930" CreationDate="2017-05-16T03:43:21.327" Score="0" Body="&lt;p&gt;Ok..You can get your boot time by writing this command into the terminal :&#xA;&lt;code&gt;systemd-analyze&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check how much time services are using :&#xA;&lt;code&gt;systemd-analyze blame | less&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To print the output to a file type :&#xA;&lt;code&gt;systemd-analyze blame &amp;gt; Boot.txt&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A &lt;em&gt;Boot.txt&lt;/em&gt; file will be created in your home directory. You can then upload your file here so we can go through it and suggest you an optimal solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Meanwhile try to update your OS by :&#xA;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9314" LastEditorDisplayName="user9314" LastEditDate="2017-05-16T03:49:25.197" LastActivityDate="2017-05-16T03:49:25.197" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="11938" PostTypeId="2" ParentId="11127" CreationDate="2017-05-16T04:00:07.460" Score="1" Body="&lt;p&gt;You can easily downgrade ( or upgrade ) to any kernel ( even 4.11 ). You could use the CLI to do so. Or you could get &lt;strong&gt;Ukuu Kernel Updater&lt;/strong&gt;.&#xA;To install Ukuu type into terminal :&#xA;&lt;code&gt;sudo apt-add-repository -y ppa:teejee2008/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However after downgrading do not remove your stock kernel. If in case anything goes wrong you could revert back to your old kernel. &#xA;( And BTW why would you want to &quot;downgrade&quot; the kernel ? ) .&lt;/p&gt;&#xA;" OwnerDisplayName="user9314" LastActivityDate="2017-05-16T04:00:07.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11939" PostTypeId="2" ParentId="11930" CreationDate="2017-05-16T07:27:52.343" Score="1" Body="&lt;p&gt;You can disable any service by runinng the command :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl disable Service_name&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With this command the service will be disabled at boot. Try disabling the top two services and install a program called &lt;em&gt;preload&lt;/em&gt; ( It cuts off boot-up time ) .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For installing it run :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install preload&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To hide the boot messages ( that long list ) : Press ESC or Num 0 when they show up.  &lt;/p&gt;&#xA;" OwnerDisplayName="user9314" LastEditorDisplayName="user9314" LastEditDate="2017-05-16T07:39:12.563" LastActivityDate="2017-05-16T07:39:12.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11940" PostTypeId="1" CreationDate="2017-05-16T08:53:01.907" Score="0" ViewCount="487" Body="&lt;p&gt;Gnome desktop supports &lt;code&gt;&amp;lt;Alt&amp;gt;Grave&lt;/code&gt; as far as I know:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/jussi-kalliokoski/dotfiles/blob/master/.config/gnome3-extra/keybindings.conf&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jussi-kalliokoski/dotfiles/blob/master/.config/gnome3-extra/keybindings.conf&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and when I press &lt;code&gt;Alt + backtick&lt;/code&gt; button at the &lt;code&gt;settings &amp;gt; keyboard &amp;gt; shortcuts&lt;/code&gt;&#xA;It shows up a corresponding symbols. But it doesn't actually work. Is this a bug? There doesn't seem to be any other application interfering with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am desperate for this key binding because of my muscle memory. Any other workaround will be helpful.&lt;/p&gt;&#xA;" OwnerUserId="9736" LastActivityDate="2019-05-08T00:02:20.530" Title="Grave (backtick) key for the keyboard shortcut is not working" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11941" PostTypeId="2" ParentId="6838" CreationDate="2017-05-16T11:51:05.027" Score="0" Body="&lt;p&gt;I have a simple solution for this issue. Just restart the mouse module ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter this code in a terminal (&lt;code&gt;Ctrl+Alt+T&lt;/code&gt; if you aren't able to click in the icon)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo rmmod psmouse ; sudo modprobe psmouse&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="5394" LastActivityDate="2017-05-16T11:51:05.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11942" PostTypeId="2" ParentId="11932" CreationDate="2017-05-16T13:02:50.767" Score="1" Body="&lt;p&gt;I'm on dual boot (UEFI) with Windows10 and AppCenter installs work fine here (Installed a fresh copy yesterday)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There was an issue with the appcenter not so long ago (&lt;a href=&quot;https://medium.com/elementaryos/important-update-released-501c9d9f28b&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue description&lt;/a&gt;) so you can follow these instructions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you updated the OS&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can you install via apt or apt-get? &#xA;-------------------------------------------------17/05/17&#xA;UPDATE:&#xA;I run the upgrades and the appCenter is still working&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="8520" LastEditDate="2017-05-17T05:21:00.160" LastActivityDate="2017-05-17T05:21:00.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11943" PostTypeId="1" CreationDate="2017-05-16T15:00:04.763" Score="1" ViewCount="162" Body="&lt;p&gt;I can't have middle click closing apps when I accidentally tap it.  Best solution I've found is to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7851/how-do-i-disable-the-middle-click-in-loki&quot;&gt;disable&lt;/a&gt; middle click entirely.  I'd rather not have a big deadspot in the middle of trackpad.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd rather expand my trackpad so that middle click is treated as a left click.  I also want left click to continue to be a left click.  How can I do this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;me@pc:~/grive$ xmodmap -e &quot;pointer = 1 1 3&quot;&#xA;Warning: Only changing the first 3 of 10 buttons.&#xA;X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;  Major opcode of failed request:  116 (X_SetPointerMapping)&#xA;  Value in failed request:  0x1&#xA;  Serial number of failed request:  9&#xA;  Current serial number in output stream:  9&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. (I don't know if Im on Loki or how to tell.  I just downloaded elementary OS and installed it the weekend of 5/12/2017)&lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="9738" LastEditDate="2017-05-17T02:12:51.137" LastActivityDate="2017-05-17T02:12:51.137" Title="How do I turn middle click into left click?" Tags="|touchpad|click|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11948" PostTypeId="1" CreationDate="2017-05-16T23:19:30.577" Score="1" ViewCount="573" Body="&lt;p&gt;I'd like to bind &lt;code&gt;Ctrl + L&lt;/code&gt; to &lt;code&gt;tput reset&lt;/code&gt; rather than &lt;code&gt;clear&lt;/code&gt;. Any ideas how to accomplish this?&lt;/p&gt;&#xA;" OwnerUserId="4544" LastActivityDate="2018-10-23T15:17:12.093" Title="How to completely clear screen in terminal with keyboard shortcut?" Tags="|pantheon-terminal|keyboard-shortcuts|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11949" PostTypeId="2" ParentId="11940" CreationDate="2017-05-16T23:31:34.777" Score="1" Body="&lt;p&gt;ibus had a binding that needed to be changed to avoid the conflict. You can check this by doing either:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep -i grave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;by default gnome desktop has a binding, but with a different name &lt;code&gt;&amp;lt;Alt&amp;gt;Above_Tab&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings switch-groups &quot;[]&quot;&#xA;&#xA;gsettings set org.gnome.desktop.wm.keybindings switch-group-backward &quot;[]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9736" LastActivityDate="2017-05-16T23:31:34.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11950" PostTypeId="1" CreationDate="2017-05-17T04:15:33.447" Score="2" ViewCount="135" Body="&lt;p&gt;AppCenter operating system update shows 55MB to be downloaded but doing &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get dist-upgrade &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;shows 125MB to be downloaded. Is it because dist-upgrade updates dependencies? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;TDLR: What is the fundamental difference between apt-get and AppCenter OS updates?&lt;/p&gt;&#xA;" OwnerUserId="9747" LastActivityDate="2017-05-17T04:15:33.447" Title="What is the difference between AppCenter OS updates and apt-get dist-upgrade" Tags="|updates|system|appcenter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11951" PostTypeId="2" ParentId="7687" CreationDate="2017-05-17T06:20:59.937" Score="5" Body="&lt;p&gt;Try &lt;code&gt;nmcli radio wifi on&lt;/code&gt; through terminal&lt;/p&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="578" LastEditDate="2017-05-17T06:45:19.830" LastActivityDate="2017-05-17T06:45:19.830" CommentCount="2" CommunityOwnedDate="2017-05-17T06:20:59.937" ContentLicense="CC BY-SA 3.0" />
  <row Id="11952" PostTypeId="2" ParentId="11948" CreationDate="2017-05-17T06:27:58.120" Score="1" Body="&lt;p&gt;You can use a nice program called &lt;a href=&quot;http://autokey.googlecode.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AutoKey&lt;/a&gt;, which allows you to bind keyboard shortcuts with text actions.&#xA;&lt;strong&gt;To do what you need would be super easy.&lt;/strong&gt;&#xA;Take a look at this snapshot, you can copy paste it&lt;a href=&quot;https://i.stack.imgur.com/6Hjyk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6Hjyk.png&quot; alt=&quot;ctrl+l in autokey&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-17T06:27:58.120" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11953" PostTypeId="1" CreationDate="2017-05-17T06:56:59.370" Score="-1" ViewCount="189" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FlDIZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FlDIZ.png&quot; alt=&quot;all setting dispear&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;recently updates make this. (don't know which day it happend). click on + - nothing happen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;did anyone have this problem?&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-12-11T22:02:10.467" Title="Language &amp; Region all options dispear" Tags="|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11955" PostTypeId="2" ParentId="11844" CreationDate="2017-05-17T08:23:46.877" Score="10" Body="&lt;p&gt;Follow the instructions at &lt;a href=&quot;https://store.docker.com/editions/community/docker-ce-server-ubuntu&quot; rel=&quot;noreferrer&quot;&gt;Docker Store&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the point where you add the dockerstore repository, you need to replace &lt;strong&gt;$(lsb_release -cs)&lt;/strong&gt; with &lt;strong&gt;xenial&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt; sudo add-apt-repository \&#xA;       &quot;deb [arch=amd64] https://download.docker.com/linux/ubuntu \&#xA;       &lt;del&gt;$(lsb_release -cs)&lt;/del&gt; xenial \&#xA;       stable&quot;&lt;/pre&gt;&#xA;" OwnerUserId="9748" LastActivityDate="2017-05-17T08:23:46.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11958" PostTypeId="1" AcceptedAnswerId="11959" CreationDate="2017-05-17T15:21:05.977" Score="10" ViewCount="12723" Body="&lt;p&gt;Now that elementary OS Loki Update 1 (0.4.1) has been released, how can I upgrade to it without reinstalling?&lt;/p&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2017-05-17T15:51:02.333" LastActivityDate="2017-07-31T12:41:52.940" Title="What is the recommended way to update from elementary OS Loki 0.4 to Loki 0.4.1?" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11959" PostTypeId="2" ParentId="11958" CreationDate="2017-05-17T15:21:05.977" Score="9" Body="&lt;h1&gt;Step 1. Update&lt;/h1&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open up &lt;code&gt;AppCentre&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Navigate to the &lt;code&gt;Updates&lt;/code&gt; tab&lt;/li&gt;&#xA;&lt;li&gt;Install all available updates&lt;/li&gt;&#xA;&lt;li&gt;Reboot if required&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now your &lt;code&gt;System Settings &amp;gt; About&lt;/code&gt; section should look like the following image. Note that it states &quot;elementary OS &lt;strong&gt;0.4.1&lt;/strong&gt; Loki&quot;, not 0.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3zDok.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3zDok.png&quot; alt=&quot;elementary OS 0.4.1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Step 2. Upgrade Kernel [Optional]&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;While your system now runs the latest version of elementary OS, it may not be running the latest kernel underneath. If you experience no problems with your hardware, this upgrade may only create minor performance imporvements. However, if your brightness or wireless was unsupported, this may fix some of your problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;This is dangerous. You should create a backup before proceeding.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends \&#xA;    linux-generic-hwe-16.04 \&#xA;    xserver-xorg-hwe-16.04 \&#xA;    xserver-xorg-core-hwe-16.04 \&#xA;    xserver-xorg-input-all-hwe-16.04 \&#xA;    xserver-xorg-input-evdev-hwe-16.04 \&#xA;    xserver-xorg-input-libinput-hwe-16.04 \&#xA;    xserver-xorg-input-synaptics-hwe-16.04 \&#xA;    xserver-xorg-input-wacom-hwe-16.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once this is complete and you have rebooted, you should see &lt;code&gt;Linux 4.8.*&lt;/code&gt; in the elementary section of the &lt;code&gt;About&lt;/code&gt; settings panel, instead of 4.4.* &lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2017-05-17T15:21:05.977" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="11960" PostTypeId="1" CreationDate="2017-05-17T17:26:09.937" Score="0" ViewCount="583" Body="&lt;p&gt;I have forgot my update password after a six months vacation abroad what can I do to reset it ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My OS login works but when I download updates it asks for authentication but I can't remember the password ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;while trying to post this I got an error message asking to describe my question and what I have done to try to correct it well if I new how to correct it I would not be asking on here would I ?  &lt;/p&gt;&#xA;" OwnerUserId="9725" LastActivityDate="2017-05-17T19:10:04.630" Title="forgot my update password" Tags="|updates|" AnswerCount="1" CommentCount="0" ClosedDate="2017-05-18T11:47:47.457" ContentLicense="CC BY-SA 3.0" />
  <row Id="11961" PostTypeId="1" AcceptedAnswerId="11968" CreationDate="2017-05-17T17:41:24.807" Score="2" ViewCount="544" Body="&lt;p&gt;I've updated 2 times few hours ago and now pantheon doesn't start. GRUB loads, linux actually boots, but the screen remains black. I can ctrl+alt+F1 into tty1, login and do stuff, but when I switch to tty7, the screen freezes. Tried restarting lightdm but that was useless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The upgrades installed kernel 4.something.78 and a bunch of pantheon updates along with new icon pack. Appcenter icon changed to look like a house. I also check for upgrades every day, so, now I hope you understand approximately what upgrades I'm talking about. It's May 17th upgrades.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The PC is a notebook MSI GE60 20E. I also tried booting with previous version of the kernel, but the result is the same. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As it turned out, nvidia-381 drivers started conflict with something after update. I uninstalled them and now the desktop launches. But can someone explain what's happening and is it possible currently to run the latest updates with nvidia drivers? Also I don't want to install previous versions of nvidia drivers because they lacked prime settings.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="8598" LastEditDate="2017-05-18T11:48:16.413" LastActivityDate="2018-08-25T15:00:04.860" Title="nvidia driver: pantheon doesn't launch after apt upgrade" Tags="|release-loki|updates|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11963" PostTypeId="2" ParentId="11960" CreationDate="2017-05-17T19:10:04.630" Score="0" Body="&lt;p&gt;Give this a shot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&quot;&gt;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, in the future, if you are the only one using your machine make your su (what you call update) password the same as your user login. The su password is the admin password. Any actions that make global changes to system will prompt for the su password.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-17T19:10:04.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11964" PostTypeId="1" AcceptedAnswerId="11965" CreationDate="2017-05-17T19:43:26.517" Score="2" ViewCount="270" Body="&lt;p&gt;Ok, so I'm trying to set my system general language to pt-BR, I already downloaded pt language pack with Language Support app, but no languages are shown on System Settings/Language &amp;amp; Region, just a &quot;blank&quot; window. Even when I tried to download English packages the language won't show up on settings, so I really think the trouble is something about languages not showing up on settings, because I already checked others questions with similar problems and followed its steps, but again, nothing works. What is going on? How can I set my system language to pt-BR?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's some screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Language Support app:&lt;img src=&quot;https://i.stack.imgur.com/3cZsc.png&quot; alt=&quot;Language Support app&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings/Language &amp;amp; Region:&lt;img src=&quot;https://i.stack.imgur.com/1kTep.png&quot; alt=&quot;Language Support app&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;FIX&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The very last line of the sidebar has a &quot;+&quot; button, just click it and search the preferred language.&lt;/p&gt;&#xA;" OwnerUserId="9756" LastEditorUserId="9756" LastEditDate="2017-05-17T20:59:24.480" LastActivityDate="2017-05-17T22:09:08.397" Title="Languages won't show up" Tags="|language|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11965" PostTypeId="2" ParentId="11964" CreationDate="2017-05-17T20:00:59.187" Score="1" Body="&lt;p&gt;Got the same thing happening as well... My workarournd in the &quot;SystemSettings&quot; window is click on &quot;unlock&quot;button in the right upper corner as admin and add a language on the &quot;+&quot; button on the left corner. WHen I added my language this way somehow all other languages where shown as well at this point.&lt;/p&gt;&#xA;" OwnerUserId="9757" LastActivityDate="2017-05-17T20:00:59.187" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="11967" PostTypeId="2" ParentId="11964" CreationDate="2017-05-17T22:09:08.397" Score="-1" Body="&lt;p&gt;click the + sign in the bottom left corner and you can add languages.&lt;/p&gt;&#xA;" OwnerUserId="9759" LastActivityDate="2017-05-17T22:09:08.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11968" PostTypeId="2" ParentId="11961" CreationDate="2017-05-17T22:53:31.067" Score="1" Body="&lt;p&gt;No idea what happened. Reinstalled the system, apt upgrade again, now it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just ran into the very same problem on the newly installed system. That happened after I installed some packages. Excluding one after another, I found that it's &lt;strong&gt;nvidia-381&lt;/strong&gt;. I uninstalled it via tty1 and now it boots as it should. To clarify, these nvidia drivers worked well before those system updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just figured out how to preserve nvidia driver and boot. I think this could be a bug somewhere in that version of the driver, that X server doesn't start because that happened before. However, I'm inclined to think the bug is somewhere else. It used to work without any problems. But here's what you can do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Log in to another tty: for example, ctrl+alt+F1 &lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo prime-select intel&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Done. &lt;/p&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="8598" LastEditDate="2017-06-30T07:07:38.093" LastActivityDate="2017-06-30T07:07:38.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11969" PostTypeId="2" ParentId="8361" CreationDate="2017-05-17T22:56:29.433" Score="0" Body="&lt;p&gt;This is also an ongoing issue for me. Looks like after some research it has to do with nvidia drivers. I was hoping this was looked into for the 0.4.1 release. Has anyone else found any other fixes other than xbacklight?&lt;/p&gt;&#xA;" OwnerUserId="7888" LastActivityDate="2017-05-17T22:56:29.433" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11970" PostTypeId="1" CreationDate="2017-05-17T23:36:03.540" Score="2" ViewCount="148" Body="&lt;p&gt;Whenever I type anything into Slingshot, both Slingshot and Wingpanel freeze, crash, and reload.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Noticed this after uninstalling Epiphany, am I not supposed to uninstall it? I have reinstalled Epiphany and it still crashes.&lt;/p&gt;&#xA;" OwnerUserId="9761" LastActivityDate="2017-05-17T23:36:03.540" Title="Searching in Slingshot causes Wingpanel Crash" Tags="|wingpanel|slingshot|crash|" AnswerCount="0" CommentCount="0" ClosedDate="2017-11-17T00:31:29.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="11972" PostTypeId="1" CreationDate="2017-05-18T06:55:38.957" Score="1" ViewCount="852" Body="&lt;p&gt;since last Friday, my wingpanel (and settings) are crashing. I didn't change OS in any way except some OS updates. I tried several fixes found on stackexchange, reddit and bug reports including:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Removing all wingpanel indicators, at least those with name starting with wingpanel-indicator.&lt;/li&gt;&#xA;&lt;li&gt;Uninstalled elementarytweaks using apt purge&lt;/li&gt;&#xA;&lt;li&gt;sudo apt-get remove indicator-synapse&lt;/li&gt;&#xA;&lt;li&gt;sudo apt remove switchboard-plug-security-privacy&lt;/li&gt;&#xA;&lt;li&gt;removing ~./config&lt;/li&gt;&#xA;&lt;li&gt;reinstalling wingpanel using apt remove and apt purge&lt;/li&gt;&#xA;&lt;li&gt;Creating new account&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The error when running with wingpanel(crash for settings below) --debug flag: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (wingpanel:12939): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-CeZKyHU9bw: Connection refused&#xA;&#xA;(wingpanel:12939): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2045:14: 'min-height' is not a valid property name&#xA;&#xA;(wingpanel:12939): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2046:13: 'min-width' is not a valid property name&#xA;&#xA;(wingpanel:12939): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2051:13: 'min-width' is not a valid property name&#xA;[INFO 08:42:03.387099] Application.vala:153: System Panel version: 2.0 .2&#xA;[INFO 08:42:03.387168] Application.vala:155: Kernel version: 4.4.0-78-generic&#xA;[DEBUG 08:42:03.388244] [Gtk] Connecting to session manager&#xA;[DEBUG 08:42:03.395298] Slingshot.vala:85: Activating Slingshot&#xA;[DEBUG 08:42:03.395441] IndicatorManager.vala:314: app-launcher registered&#xA;[DEBUG 08:42:03.398383] Settings.vala:163: Loading settings from schema 'org.pantheon.desktop.slingshot'&#xA;[DEBUG 08:42:03.402265] sql-schema.vala:204: schema_version is 10&#xA;[DEBUG 08:42:03.403555] AppSystem.vala:50: Updating Applications menu tree...&#xA;[DEBUG 08:42:03.453277] sql-schema.vala:204: schema_version is 10&#xA;[06:42:03.498754 Gtk-Warning] Theme parsing error: gtk-widgets.css:2045:14: 'min-height' is not a valid property name&#xA;[06:42:03.498788 Gtk-Warning] Theme parsing error: gtk-widgets.css:2046:13: 'min-width' is not a valid property name&#xA;[06:42:03.498811 Gtk-Warning] Theme parsing error: gtk-widgets.css:2051:13: 'min-width' is not a valid property name&#xA;[06:42:04.164340 Gtk-Critical] gtk_window_resize: assertion 'width &amp;gt; 0' failed&#xA;[INFO 08:42:04.171328] DBusService.vala:64: Service registration suceeded&#xA;[06:42:04.213923 Warning] [DesktopFileInfo] Unable to get exec for Other&#xA;[06:42:04.221050 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;Systemd is not present&#xA;[06:42:04.276076 Critical] string_contains: assertion 'self != NULL' failed&#xA;[06:42:04.276090 Critical] string_contains: assertion 'self != NULL' failed&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just to be sure I included switchboard(settings) crash output because it is similar and started also last Friday.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (switchboard:15800): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-CeZKyHU9bw: Connection refused&#xA;&#xA;(switchboard:15800): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2045:14: 'min-height' is not a valid property name&#xA;&#xA;(switchboard:15800): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2046:13: 'min-width' is not a valid property name&#xA;&#xA;(switchboard:15800): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:2051:13: 'min-width' is not a valid property name&#xA;[INFO 08:50:10.694749] Application.vala:153: System Settings version: 2.0&#xA;[INFO 08:50:10.694791] Application.vala:155: Kernel version: 4.4.0-78-generic&#xA;[DEBUG 08:50:10.695613] [Gtk] Connecting to session manager&#xA;[DEBUG 08:50:10.698787] DisplayPlug.vala:214: Activating Display plug&#xA;[DEBUG 08:50:10.699607] PlugsManager.vala:91: pantheon-display registered&#xA;[DEBUG 08:50:10.700833] ColorPlug.vala:95: Activating Color plug&#xA;[DEBUG 08:50:10.701130] PlugsManager.vala:91: hardware-gcc-color registered&#xA;[DEBUG 08:50:10.701992] SoundPlug.vala:145: Activating Sound plug&#xA;[DEBUG 08:50:10.702162] PlugsManager.vala:91: hardware-gcc-sound registered&#xA;[DEBUG 08:50:10.702867] WacomPlug.vala:95: Activating Wacom plug&#xA;[DEBUG 08:50:10.703019] PlugsManager.vala:91: hardware-gcc-wacom registered&#xA;[DEBUG 08:50:10.703802] keyboard.vala:76: Activating Keyboard plug&#xA;[DEBUG 08:50:10.703973] PlugsManager.vala:91: hardware-pantheon-keyboard registered&#xA;[DEBUG 08:50:10.704607] mouse-touchpad.vala:134: Activating Mouse-Touchpad plug&#xA;[DEBUG 08:50:10.704752] PlugsManager.vala:91: pantheon-mouse-touchpad registered&#xA;[DEBUG 08:50:10.705405] Plug.vala:404: Activating Power plug&#xA;[DEBUG 08:50:10.709302] Battery.vala:69: battery path:/org/freedesktop/UPower/devices/battery_BAT0 , its a laptop, dbus connected&#xA;Systemd is not present&#xA;[FATAL 08:50:10.714374] string_contains: assertion 'self != NULL' failed&#xA;[FATAL 08:50:10.714465] string_contains: assertion 'self != NULL' failed&#xA;Segmentation fault (core dumped)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9767" LastActivityDate="2017-05-18T06:55:38.957" Title="Wingpanel crashing with string_contains: assertion 'self != NULL' failed" Tags="|settings|wingpanel|crash|" AnswerCount="0" CommentCount="1" ClosedDate="2017-05-19T20:32:26.013" ContentLicense="CC BY-SA 3.0" />
  <row Id="11973" PostTypeId="2" ParentId="4090" CreationDate="2017-05-18T07:36:38.403" Score="0" Body="&lt;p&gt;I used to type my password in qwerty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of today, I didn't succeed in login... until I type my password in azerty, and it works !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I'm supposing there was a recent upgrade (I don't log in every day - only where there's an upgrade needing a reboot) that solved the problem.&lt;/p&gt;&#xA;" OwnerUserId="3855" LastActivityDate="2017-05-18T07:36:38.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11975" PostTypeId="1" CreationDate="2017-05-18T13:17:44.713" Score="1" ViewCount="172" Body="&lt;p&gt;does anyone experience UI problems when waking up from suspend? What I meant is not the black screen problem, it seems like the GTK theme is broken when waking up and this happened randomly. For example, when i opened the settings, all of the texts are missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System is using Intel 4600 + Nvidia 960M (Nvidia disabled via prime)&#xA;GTK theme is arc&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="9769" LastActivityDate="2019-04-09T07:03:35.757" Title="Suspend Problem (?)" Tags="|gtk|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-16T14:27:11.167" ContentLicense="CC BY-SA 3.0" />
  <row Id="11976" PostTypeId="2" ParentId="11297" CreationDate="2017-05-18T13:56:43.510" Score="2" Body="&lt;p&gt;I'm not sure about your hardware situation(EFI or MBR etc).&#xA;So, in general, follow the Arch Linux wiki page for tutorial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/systemd-boot&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/systemd-boot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you are trying to do this on Mac as I did. Go here.&#xA;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Mac#Using_the_native_Apple_bootloader_with_systemd-boot_.28Recommended.29&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Mac#Using_the_native_Apple_bootloader_with_systemd-boot_.28Recommended.29&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2017-05-18T13:56:43.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11977" PostTypeId="2" ParentId="3012" CreationDate="2017-05-18T15:15:27.793" Score="5" Body="&lt;p&gt;On elementary OS Loki 0.4, I solved the problem by installing dconf-editor&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then with dconf-editor navigate to org/panthenon/photos/crop-settings and set &lt;code&gt;last-crop-height&lt;/code&gt;, &lt;code&gt;last-crop-menu-choice&lt;/code&gt; and &lt;code&gt;last-crop-height&lt;/code&gt; values to &lt;code&gt;0&lt;/code&gt;.&#xA;Please note it should be exactly zero otherwise it will not work!&lt;/p&gt;&#xA;" OwnerUserId="8524" LastEditorDisplayName="user212" LastEditDate="2017-05-18T19:58:54.870" LastActivityDate="2017-05-18T19:58:54.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11978" PostTypeId="2" ParentId="9871" CreationDate="2017-05-18T16:26:35.057" Score="0" Body="&lt;p&gt;Making the bootable usb with rufus solved the problem for me.&lt;/p&gt;&#xA;" OwnerUserId="9771" LastActivityDate="2017-05-18T16:26:35.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11979" PostTypeId="1" AcceptedAnswerId="11984" CreationDate="2017-05-18T17:17:10.973" Score="0" ViewCount="152" Body="&lt;p&gt;Image next to the system language ... seems to be a blocked video&#xA;&lt;a href=&quot;https://i.stack.imgur.com/g12vs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g12vs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;When I click on it it does not display anything, but it actually popped up after I installed Dropbpox ...&lt;/p&gt;&#xA;" OwnerUserId="9772" LastEditorUserId="26" LastEditDate="2017-05-18T22:00:30.800" LastActivityDate="2017-05-18T22:00:30.800" Title="My OS is displaying this image, I do not know what it is ... someone could explain" Tags="|display|videos|" AnswerCount="2" CommentCount="0" ClosedDate="2017-05-18T22:00:38.140" ContentLicense="CC BY-SA 3.0" />
  <row Id="11980" PostTypeId="1" AcceptedAnswerId="12014" CreationDate="2017-05-18T17:23:59.033" Score="0" ViewCount="1027" Body="&lt;p&gt;I am using Loki 0.4.1. Whenever I am opening svg file, I am getting this error and Inkscape is crashing&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yfX6q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yfX6q.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me out. I tried installing Inkscape but it did not help.&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2017-05-19T16:54:09.113" Title="Inkscape encountered an internal error and will close now" Tags="|release-loki|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="11981" PostTypeId="2" ParentId="11979" CreationDate="2017-05-18T17:30:37.897" Score="0" Body="&lt;p&gt;The icon itself means that there's a program running and the icon specified in its .desktop file cant be found in any of the icon locations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Its a common thing with Dropbox for example (if its indeed dropbox let me know if you need a fix)&#xA;Other programs might have this behavior as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try clicking it and see which program's menu opens&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-18T17:30:37.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11982" PostTypeId="2" ParentId="11975" CreationDate="2017-05-18T17:33:21.933" Score="1" Body="&lt;p&gt;I had this problem up until today, when i installed the latest OS update (the one with the new AppCenter), i think it had an update to the nvidia driver.&#xA;Afterwards the behavior stabilized and everything is working now.&#xA;Try to run the updates and come back if the issue wasn't solved. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I run dell XPS with nvidia 1050 + intel HD&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-18T17:33:21.933" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11984" PostTypeId="2" ParentId="11979" CreationDate="2017-05-18T18:01:38.667" Score="2" Body="&lt;p&gt;You can install the icon for Dropbox manually. Check &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure you have git installed via &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then execute &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/zant95/elementary-dropbox /tmp/elementary-dropbox&#xA;bash /tmp/elementary-dropbox/install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-18T18:01:38.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11985" PostTypeId="1" AcceptedAnswerId="12020" CreationDate="2017-05-18T18:49:48.113" Score="0" ViewCount="292" Body="&lt;p&gt;Please help me understand what is happening.&#xA;What is this process and how to get rid of the fact that it eats the CPU resource.&#xA;I will be glad to any help in this matter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop: &lt;a href=&quot;https://www.asus.com/2-in-1-PCs/ASUS_Transformer_Book_Flip_TP500LN/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.asus.com/2-in-1-PCs/ASUS_Transformer_Book_Flip_TP500LN/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Core i7-4510U&#xA;nVidia GeForce GT 840M, 2GB&#xA;RAM DDR3L-1600 8GB&#xA;Wi-Fi 802.11 a/b/g/n&#xA;Bluetooth 4.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QLSAB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QLSAB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9773" LastActivityDate="2017-05-19T20:46:33.220" Title="Loki 0.4.1 packagekid process overloads the CPU" Tags="|release-loki|cpu|processes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11987" PostTypeId="1" AcceptedAnswerId="12067" CreationDate="2017-05-18T21:10:22.790" Score="0" ViewCount="213" Body="&lt;p&gt;I installed updates (via App Center) to update to 0.4.1. This completed successfully but now I can't install any applications, including one I paid for. I get this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zIQrd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zIQrd.png&quot; alt=&quot;Screenshot of error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't recall changing any libcurl settings or anything that would cause this. Anyone have any ideas on how to resolve?&lt;/p&gt;&#xA;" OwnerUserId="8115" LastActivityDate="2017-05-21T23:18:28.603" Title="Apps no longer install after 0.4.1 upgrade" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11988" PostTypeId="2" ParentId="11948" CreationDate="2017-05-18T21:47:42.177" Score="0" Body="&lt;p&gt;This is not for &lt;code&gt;bash&lt;/code&gt;, so I will not accept this self posted answer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use &lt;code&gt;zsh&lt;/code&gt;, and the following at the end of my &lt;code&gt;.zshrc&lt;/code&gt; file works well for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Hard clear shortcut&#xA;function hard_clear() {&#xA;  bak_buff=$BUFFER&#xA;  BUFFER=&quot;tput reset&quot;&#xA;  zle accept-line &#xA;  zle -U $bak_buff&#xA;}&#xA;zle -N hard_clear&#xA;bindkey &quot;^[k&quot; hard_clear&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;We create a function &lt;code&gt;hard_clear()&lt;/code&gt; which backs up the buffer, replaces the buffer with &lt;code&gt;tput reset&lt;/code&gt;, executes, then rewrites the old buffer. This function is bound to &lt;code&gt;Alt + k&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4544" LastActivityDate="2017-05-18T21:47:42.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11990" PostTypeId="2" ParentId="9502" CreationDate="2017-05-19T00:40:29.873" Score="0" Body="&lt;p&gt;having the same issues, sound work on earphones but not on laptop speakers, and even through the HDMI port I got only video not audio, tried downgrading linux kernel without success.  This did the trick for me &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://answers.launchpad.net/ubuntu/+source/gnome-media/+question/24639&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://answers.launchpad.net/ubuntu/+source/gnome-media/+question/24639&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;read carefully before attempting anything on your system.&lt;/p&gt;&#xA;" OwnerUserId="9780" LastActivityDate="2017-05-19T00:40:29.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="11991" PostTypeId="1" CreationDate="2017-05-19T01:16:35.673" Score="1" ViewCount="179" Body="&lt;p&gt;I have a new Alienware 13 r3 and it came pre-loaded with Windows 10. I read that Loki 0.4.1 supports everything on this Alienware model perfectly. Touch screen included.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm looking to learn c# and continue writing games in c++ (cocos2d-x, qt). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What are my software options for c# on Linux? I'm looking to learn c# as most of the jobs in my area are c# and I prefer c++.&lt;/p&gt;&#xA;" OwnerUserId="9781" LastActivityDate="2017-10-16T13:28:05.197" Title="Loki 0.4.1 and replacing Windows help" Tags="|development|microsoft-windows|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11993" PostTypeId="1" CreationDate="2017-05-19T04:30:08.683" Score="0" ViewCount="248" Body="&lt;p&gt;After install 4.1 new version, I rebooted and logged in. The login interface disappeared as usual but nothing else happened there was just the background image. No way to shutdown also. How to fix this. Why is this happen?&lt;/p&gt;&#xA;" OwnerUserId="9784" LastActivityDate="2017-05-20T17:51:43.020" Title="Empty desktop after installing 4.1 version" Tags="|wingpanel|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2018-03-11T02:01:52.943" ContentLicense="CC BY-SA 3.0" />
  <row Id="11994" PostTypeId="1" CreationDate="2017-05-19T05:25:21.387" Score="2" ViewCount="195" Body="&lt;p&gt;I need to launch Switchboard Plugs directly from command line. What are the settings:// URIs of the Switchboard plugs?&lt;/p&gt;&#xA;" OwnerUserId="9783" LastEditorUserId="9783" LastEditDate="2017-06-05T05:29:55.207" LastActivityDate="2018-04-02T15:06:46.767" Title="What are the Switchboard Plugs URIs?" Tags="|release-loki|settings|switchboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11996" PostTypeId="2" ParentId="11991" CreationDate="2017-05-19T06:44:02.357" Score="1" Body="&lt;p&gt;MonoDevelop is a decent free program for programing in C#, F#, Visual Basic .NET, C/C++, and Vala. You can find it in the AppCentre or download it directly from their website: &lt;a href=&quot;http://www.monodevelop.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.monodevelop.com/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-05-19T06:44:02.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11997" PostTypeId="2" ParentId="3639" CreationDate="2017-05-19T06:51:51.050" Score="1" Body="&lt;p&gt;Try installing Ubuntu Restricted Extras:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-05-19T06:51:51.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11998" PostTypeId="2" ParentId="8927" CreationDate="2017-05-19T07:00:40.383" Score="0" Body="&lt;p&gt;You could assign your power button to hibernate the system by going to system settings -&gt; Power -&gt; select &quot;Hibernate&quot; next to &quot;power button&quot; like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nVkYy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nVkYy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-05-19T07:00:40.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="11999" PostTypeId="1" CreationDate="2017-05-19T08:15:45.603" Score="1" ViewCount="51" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/72B89.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/72B89.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm new to Elementary OS and after a week of using it I decided to check how much disk space I had used so far. I went to my SSD (Which used to be C:), right-clicked and looked at &lt;code&gt;properties&lt;/code&gt;. I found the information I expected, though somewhat skewered. Now, please do correct me if I'm wrong... But does this say I have one-hundred-and-forty point seven Tera-bytes worth of files on my ~250GB SSD?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like the OS so far... but this seems rather miraculous. What's causing this?&lt;/p&gt;&#xA;" OwnerUserId="9786" LastActivityDate="2017-05-19T08:15:45.603" Title="What's wrong with my manager disk size accuracy?" Tags="|files|disk-management|" AnswerCount="0" CommentCount="1" ClosedDate="2017-05-23T22:24:47.923" ContentLicense="CC BY-SA 3.0" />
  <row Id="12001" PostTypeId="1" CreationDate="2017-05-19T09:19:19.787" Score="0" ViewCount="145" Body="&lt;p&gt;i recently installed sublime Text and I add an .desktop file to open it via Slingshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But If I search for sublime slingshot just shows a generic icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change the .desktop file to get rid of the generic icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Sublime Text&#xA;GenericName=Text Editor&#xA;Comment=Sophisticated text editor for code, markup and prose&#xA;Exec=/home/snowparrot/sublime/sublime_text_3/sublime_text %F&#xA;Terminal=false&#xA;MimeType=text/plain;&#xA;Icon=/home/snowparrot/sublime/sublime_text_3/Icon/128x128/sublime-text.png&#xA;Categories=TextEditor;Development;&#xA;StartupNotify=true&#xA;Actions=Window;Document;&#xA;&#xA;[Desktop Action Window]&#xA;Name=Neues Fenster in Sublime&#xA;Exec=/opt/sublime_text/sublime_text -n&#xA;&#xA;&#xA;[Desktop Action Document]&#xA;Name=Neue Datei in Sublime&#xA;Exec=/opt/sublime_text/sublime_text --command new_file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9580" LastEditorUserId="84" LastEditDate="2018-05-06T18:15:12.073" LastActivityDate="2018-05-06T18:15:12.073" Title="how to add smaller in icon in .desktop - file for slingshot?" Tags="|slingshot|app-shortcuts|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12002" PostTypeId="1" AcceptedAnswerId="12044" CreationDate="2017-05-19T09:37:56.167" Score="0" ViewCount="737" Body="&lt;p&gt;does anyone know how to unblock bluetooth (soft blocked) in Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my rfkill list output in case needed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: asus-wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: asus-bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;3: hci0: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks guys!&lt;/p&gt;&#xA;" OwnerUserId="9769" LastActivityDate="2017-05-20T17:42:04.317" Title="Bluetooth Problem in Loki 0.4.1" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12003" PostTypeId="1" CreationDate="2017-05-19T10:19:43.623" Score="2" ViewCount="96" Body="&lt;p&gt;I want to buy Vocal in the Appcenter, since in principle I'd like to support developers making good apps for Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I can't get Appcenter to accept my payment details. I think the problem is the card expiry field?  It prompts with &quot;MM / YY&quot; but will only accept 4 characters.  I put in 0618 but the &quot;Pay&quot; button remains greyed out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steve&lt;/p&gt;&#xA;" OwnerUserId="9787" LastActivityDate="2017-11-15T19:55:32.587" Title="Trying to &quot;pay what I want&quot; for Vocal in the Appcenter" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12006" PostTypeId="1" CreationDate="2017-05-19T12:31:34.510" Score="1" ViewCount="30" Body="&lt;p&gt;I have been using Elementary OS for a few months now. Am really enjoying using it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 problem I have tho is that I use Google Chrome for browsing and I have made web apps with it for Facebook, Instagram etc and after using it then closing it, the next time I open it, it opens up a little bit further down on the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens every time until the bottom of the window gets to the bottom of the screen and then it doesn't get any lower. So I move the window back up the top and it all starts again. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Happens using Chromium too&lt;/p&gt;&#xA;" OwnerUserId="9788" LastEditorUserId="9788" LastEditDate="2017-05-19T13:00:09.510" LastActivityDate="2017-05-19T13:00:09.510" Title="Chrome opening further down screen each time" Tags="|applications|desktop|google-chrome|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12007" PostTypeId="2" ParentId="12001" CreationDate="2017-05-19T13:33:47.207" Score="0" Body="&lt;p&gt;I would check the path to your icon file. If it's correct try adding a StartWMClass line to your file. Run xprop WM_CLASS and add the output the the above line.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-09-19T02:11:18.350" LastActivityDate="2017-09-19T02:11:18.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12008" PostTypeId="1" CreationDate="2017-05-19T13:45:19.130" Score="0" ViewCount="283" Body="&lt;p&gt;I am a new Elementary OS User, and I have a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could install apps before, but since I tried to install Spotify following &lt;a href=&quot;https://i.stack.imgur.com/So5oy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt;, I am getting an error message each time I try to install any app. Here's a picture of the error message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/So5oy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/So5oy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: The result of the cat command is two lines of text, and both say &quot;sudo apt-get update&quot;. &lt;/p&gt;&#xA;" OwnerDisplayName="user9789" LastEditorDisplayName="user9789" LastEditDate="2017-05-19T20:12:29.647" LastActivityDate="2019-12-07T09:01:25.197" Title="Cannot install any app" Tags="|software-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12009" PostTypeId="2" ParentId="12003" CreationDate="2017-05-19T14:00:45.433" Score="1" Body="&lt;p&gt;Yes, the expiry date field only accepts 4 digits, but it should work that way (I already bought Vocal and Nimbus and didn't encounter your issue). &#xA;Check the other fields for things like missing digit in CC number etc.&lt;/p&gt;&#xA;" OwnerUserId="9790" LastActivityDate="2017-05-19T14:00:45.433" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12010" PostTypeId="1" CreationDate="2017-05-19T14:10:47.180" Score="1" ViewCount="204" Body="&lt;p&gt;I'm using 0.4.1 Loki, most of functions are working fine but&#xA;Language and Region in Settings, contents are all empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do to fix this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5ES3w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5ES3w.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9791" LastActivityDate="2017-05-19T14:10:47.180" Title="Language and Region section is empty" Tags="|release-loki|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12011" PostTypeId="2" ParentId="6780" CreationDate="2017-05-19T14:32:47.367" Score="1" Body="&lt;p&gt;I prefer to swap &lt;code&gt;Ctrl&lt;/code&gt; and &lt;code&gt;Caps Lock&lt;/code&gt;. &lt;strong&gt;Keyboard -&gt; Options -&gt; Ctrl key position: Swap Ctrl and Caps Lock&lt;/strong&gt;. In order to use &lt;code&gt;Ctrl + \&lt;/code&gt; to switch between keyboard layouts — &lt;strong&gt;Keyboard -&gt; Shortcuts -&gt; Universal Access: Next Keyboard Layout&lt;/strong&gt; (&lt;code&gt;Ctrl + \&lt;/code&gt;). So wen you press &lt;code&gt;Caps Lock + \&lt;/code&gt; layouts will change, when you press Ctrl(left) text input mode switches to upper/lower case.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-05-19T14:32:47.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12013" PostTypeId="2" ParentId="9407" CreationDate="2017-05-19T15:58:53.020" Score="0" Body="&lt;p&gt;I've tried the few that are available for Linux, and, meh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That, and sound under Linux can be a pain. Pulse Audio was buggy at times, and JACK made me want to kill myself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I use eOS as my primary driver, I dual-boot into Windows and run PreSonus Studio One for my DAW. (That, and soo many VSTs only work under Windows / OSX...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Side-story: I reached out to the developers at PreSonus to see if they were working on a Linux version. In short: Nope. The audio-layer is too difficult where OSX and Windows take care of a lot of that for you.)&lt;/p&gt;&#xA;" OwnerUserId="9792" LastActivityDate="2017-05-19T15:58:53.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12014" PostTypeId="2" ParentId="11980" CreationDate="2017-05-19T16:54:09.113" Score="0" Body="&lt;p&gt;It turns out there is a bug in 0.91, and 0.91 is what you get from Ubuntu repo, so I installed PPA from Inkscape official website and got 0.92.1 version, which has resolved the issue.&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2017-05-19T16:54:09.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12015" PostTypeId="2" ParentId="12155" CreationDate="2017-05-19T17:44:59.707" Score="2" Body="&lt;p&gt;A solution (or at least temporary workaround) proposed in the bug &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;discussion&lt;/a&gt; - is to rename the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/xdg/autostart/at-spi-dbus-bus.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Yes. this happened to me as well.&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="8520" LastEditDate="2017-05-20T17:51:43.020" LastActivityDate="2017-05-20T17:51:43.020" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12016" PostTypeId="2" ParentId="2643" CreationDate="2017-05-19T18:48:29.553" Score="0" Body="&lt;p&gt;I don't know if this would solve the problem directly, but it might be worth a try as a way around it.Under System Settings-&gt;Security &amp;amp; Privacy-&gt;Locking, you could try turning off Lock on sleep and Lock after screen turns off. I had a problem with it freezing after waking up from sleep and not letting me enter my password, but after I disabled these two features I no longer have the problem. The other consequence of that is that I'm no longer prompted to log in with my password upon waking up from sleep any more, which is what I prefer, but that may not be your preference.&lt;/p&gt;&#xA;" OwnerUserId="9558" LastActivityDate="2017-05-19T18:48:29.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12017" PostTypeId="1" AcceptedAnswerId="13584" CreationDate="2017-05-19T18:59:06.680" Score="1" ViewCount="1266" Body="&lt;p&gt;anyone using pantheon mail with office 365? I can't make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;Vitor Jr.&lt;/p&gt;&#xA;" OwnerUserId="9795" LastActivityDate="2017-10-15T21:57:43.910" Title="elementary os loki pantheon mail with Office 365" Tags="|pantheon-mail|office|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12019" PostTypeId="1" CreationDate="2017-05-19T20:35:28.127" Score="0" ViewCount="720" Body="&lt;p&gt;When I click &quot;Try elementary OS without installing&quot; or &quot;install elementary OS&quot; my computer boots to Windows 7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have burned the elementary OS ISO in my USB.&lt;/p&gt;&#xA;" OwnerUserId="9796" LastEditorUserId="16827" LastEditDate="2019-04-13T07:13:57.647" LastActivityDate="2019-04-13T07:13:57.647" Title="Help at installing elementary OS" Tags="|system-installation|boot|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12020" PostTypeId="2" ParentId="11985" CreationDate="2017-05-19T20:46:33.220" Score="0" Body="&lt;p&gt;Have you added any third-party repository like a PPA? If a third-party repository has security warnings then this problem occurs. The related bug report is &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1587975&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. You can see whether you have such repositories by updating the repo list from the terminal via&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you see any security warning like weak GPG-Key algorithm, that might be the cause of the issue.&lt;/p&gt;&#xA;" OwnerUserId="9797" LastActivityDate="2017-05-19T20:46:33.220" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12022" PostTypeId="2" ParentId="12008" CreationDate="2017-05-19T23:10:34.133" Score="0" Body="&lt;p&gt;I'm nearly sure you didn't install Spotify correctly. At least that spotify.list file isn't correct so you need to remove it in order to install any other thing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/spotify.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then update your package list to make sure it works again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-05-19T23:10:34.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12023" PostTypeId="2" ParentId="11953" CreationDate="2017-05-19T23:13:27.060" Score="1" Body="&lt;p&gt;If you press Unlock and put your password, then the + sign works and you can add a language. After that you will see everything.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-05-19T23:13:27.060" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12024" PostTypeId="1" CreationDate="2017-05-20T01:08:34.823" Score="0" ViewCount="139" Body="&lt;p&gt;As the title says, I cannot install or update any packages, either from console via apt-get nor in the AppStore.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; pantheon-files : Depends: libpantheon-files-core0 (= &#xA;0.3.4+r2557+pkg63~daily~ubuntu0.4.1) but &#xA;0.3.4+r2561+pkg63~daily~ubuntu0.4.1.1 is installed&#xA;              Depends: libpantheon-files-widgets0 (= &#xA;0.3.4+r2557+pkg63~daily~ubuntu0.4.1) but &#xA;0.3.4+r2561+pkg63~daily~ubuntu0.4.1.1 is installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried &lt;code&gt;apt-get -f install&lt;/code&gt; &lt;code&gt;apt-get -f upgrade&lt;/code&gt; and a few others and still no results.&lt;/p&gt;&#xA;" OwnerUserId="9800" LastActivityDate="2017-05-22T17:07:40.663" Title="Cannot install/update packages. Pantheon Files error" Tags="|updates|apt|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-25T19:17:48.923" ContentLicense="CC BY-SA 3.0" />
  <row Id="12026" PostTypeId="1" AcceptedAnswerId="12034" CreationDate="2017-05-20T04:01:01.700" Score="0" ViewCount="491" Body="&lt;p&gt;After the update to kernel 4.8.0-52 my laptop doesn't boot. It does work if I select 4.4.0-78 from the grub menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did update &amp;amp; upgrade and also run &lt;code&gt;fsck /dev/sda1&lt;/code&gt; using a live USB. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is on loki. &lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2017-05-20T10:09:55.070" Title="Cannot boot on newer kernel" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12027" PostTypeId="1" CreationDate="2017-05-20T04:40:19.183" Score="2" ViewCount="3126" Body="&lt;p&gt;Problem: When I try to connect my logitech bluetooth headphones, the headphones are recognized, however, the bluetooth manager than provides a pin code asks me to input it to headphones...???  There is no input on my headphones. They are recognized as headphone/audio. &#xA;Latest download available from ElementaryOS as of May&#xA;Thinkpad X61&#xA;Logitek H600 headphones&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only options offered by ElementaryOS are to Input Pin on headphones, or cancel. &lt;/p&gt;&#xA;" OwnerUserId="9802" LastEditorUserId="9802" LastEditDate="2017-05-20T05:06:50.340" LastActivityDate="2018-02-27T22:35:56.590" Title="Bluetooth manager requests use of pin to pair headphones - elementaryOS" Tags="|bluetooth|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12028" PostTypeId="1" CreationDate="2017-05-20T06:26:06.543" Score="0" ViewCount="7635" Body="&lt;p&gt;Just installed Elementary OS on an HP Stream notebook and the wifi will not connect. It detects the network, asks for a password sometimes, but never connects. Had the same problem in Lubuntu. I think it's the wifi chipset: RealTek 8723BE. Any advice?&lt;/p&gt;&#xA;" OwnerUserId="9803" LastEditorUserId="578" LastEditDate="2017-05-20T08:35:32.553" LastActivityDate="2018-10-02T11:14:21.453" Title="How to install Realtek 8723BE wifi driver?" Tags="|wifi|networking|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12029" PostTypeId="2" ParentId="12028" CreationDate="2017-05-20T06:56:35.360" Score="1" Body="&lt;p&gt;You are right the problem probably is your wifi chipset.&#xA;Try this and see if it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the file &lt;code&gt;/etc/modprobe.d/rtl8723be.conf&lt;/code&gt; with root permission and add this: &lt;code&gt;options rtl8723be fwlps=N ips=N&lt;/code&gt;. Save the change and restart your computer.&lt;/p&gt;&#xA;" OwnerUserId="9804" LastActivityDate="2017-05-20T06:56:35.360" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12030" PostTypeId="2" ParentId="12019" CreationDate="2017-05-20T07:06:33.087" Score="0" Body="&lt;p&gt;This seems to me that there are a problem with the usb you created. Try to redownload the iso and make again the bootable usb.&lt;/p&gt;&#xA;" OwnerUserId="9804" LastActivityDate="2017-05-20T07:06:33.087" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12031" PostTypeId="2" ParentId="12026" CreationDate="2017-05-20T07:14:22.940" Score="0" Body="&lt;p&gt;First boot with the working kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After open the terminal and sure your system is updated by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are sure you have the newer kernel, run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command create a new initramfs image. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that update GRUB the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;GRUB should have recognized the newer kernel now. Reboot and you should automatically use it.&lt;/p&gt;&#xA;" OwnerUserId="9804" LastActivityDate="2017-05-20T07:14:22.940" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12032" PostTypeId="2" ParentId="12019" CreationDate="2017-05-20T07:36:24.607" Score="0" Body="&lt;p&gt;Try burning the usb image using Rufus &#xA;&lt;a href=&quot;https://rufus.akeo.ie/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://rufus.akeo.ie/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is a good usb burning tool and does all the important works for you. And check is your image of elementary is not corrupted. You can verify the hash of the file.&lt;/p&gt;&#xA;" OwnerUserId="9747" LastActivityDate="2017-05-20T07:36:24.607" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12034" PostTypeId="2" ParentId="12026" CreationDate="2017-05-20T10:09:55.070" Score="1" Body="&lt;p&gt;The kernel &lt;code&gt;4.8.0-52&lt;/code&gt; is a mainline kernel. Sometimes mainline kernels just don't work with some computers. Why do you need that specific kernel? Can you try to install any other mainline kernel instead?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't know why you need that kernel version then it's better to stick with the stable kernel &lt;code&gt;4.4.0-78&lt;/code&gt;. Newer kernels just offer updated drivers for some hardware. If you have an old computer it won't really make a big difference on most of the cases.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-05-20T10:09:55.070" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="12036" PostTypeId="1" AcceptedAnswerId="12038" CreationDate="2017-05-20T10:47:23.980" Score="-1" ViewCount="521" Body="&lt;p&gt;When I try to change language settings in Settings app I can't do anything, it first asks me for password to unlock all of the features,&#xA;and after that i can't change anything.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/vWeAt.png&quot; alt=&quot;1&quot;&gt;&#xA;I hope you can help me, I'm using Elementary OS 0.4.1&lt;/p&gt;&#xA;" OwnerUserId="9807" LastActivityDate="2017-05-20T13:37:15.987" Title="Not being able to change language settings" Tags="|settings|" AnswerCount="1" CommentCount="0" ClosedDate="2017-05-23T22:25:18.030" ContentLicense="CC BY-SA 3.0" />
  <row Id="12037" PostTypeId="2" ParentId="12028" CreationDate="2017-05-20T11:03:05.153" Score="0" Body="&lt;p&gt;You don't need to install anything as this is an issue with HP using one antenna wire on a wireless chip with 2 antenna connections.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First we will unload the module and reload it using the module parameter to try one option for the antenna&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be ant_sel=1&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then we can check to see if any AP's are found with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;iwlist scan | egrep -i 'ssid|quality'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then we can try the other antenna option and compare results&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be ant_sel=2&#xA;iwlist scan | egrep -i 'ssid|quality'&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the &lt;code&gt;ant_sel=1&lt;/code&gt; had better results then&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=1&quot; | sudo tee /etc/modprobe.d/rtl8723beant.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;ant_sel=2&lt;/code&gt; was the better option &#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=2&quot; | sudo tee /etc/modprobe.d/rtl8723beant.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-05-20T11:03:05.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12038" PostTypeId="2" ParentId="12036" CreationDate="2017-05-20T13:37:15.987" Score="0" Body="&lt;p&gt;I had the same problem, it's already answered on this link: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11964/languages-wont-show-up&quot;&gt;Languages won&amp;#39;t show up&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But just to save you some &quot;work&quot;, you can get the solution by clicking the &quot;+&quot; button on the bottom of the left sidebar, then all possible languages will show up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ah, I have a question for you, what's the theme you're using?&lt;/p&gt;&#xA;" OwnerUserId="9756" LastActivityDate="2017-05-20T13:37:15.987" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12041" PostTypeId="2" ParentId="12027" CreationDate="2017-05-20T14:51:28.690" Score="2" Body="&lt;p&gt;I would just use terminal to pair with the headset if the bluetooth manager is causing problems&#xA;&lt;pre&gt;&lt;code&gt;bluetoothctl&#xA;scan on&lt;/pre&gt;&lt;/code&gt;&#xA;If the headset is in pairing mode it should show as a &lt;code&gt;[NEW] Device&lt;/code&gt; followed by the MAC address and it's bluetooth name&#xA;Then just do&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pair&lt;/code&gt; followed by the MAC address- use capital letters&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;trust&lt;/code&gt; followed by the MAC and then use &lt;code&gt;connect&lt;/code&gt; followed by the MAC and finally you can quit &lt;code&gt;bluetoothctl&lt;/code&gt; with the &lt;code&gt;quit&lt;/code&gt; command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an example, I have a device that reports as &lt;code&gt;[NEW] Device E8:07:BF:05:7D:BA iHome iBT60&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I would&#xA;&lt;pre&gt;&lt;code&gt;pair E8:07:BF:05:7D:BA&#xA;trust E8:07:BF:05:7D:BA&#xA;connect E8:07:BF:05:7D:BA&#xA;quit&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The terminal will give you feedback as the whether each command is successful.  If the device doesn't show in Sound Settings after this check&#xA;&lt;pre&gt;&lt;code&gt;pactl list short | grep blue&lt;/pre&gt;&lt;/code&gt;&#xA;See if module-bluetooth-discover is loaded, if not&#xA;&lt;pre&gt;&lt;code&gt;pactl load-module module-bluetooth-discover&lt;/pre&gt;&lt;/code&gt;&#xA;Then connect to the device and it should appear in Sound Settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;`&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-05-20T14:51:28.690" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12043" PostTypeId="1" CreationDate="2017-05-20T15:49:35.440" Score="0" ViewCount="222" Body="&lt;p&gt;I update my system every day if there are updates. The last update was the one that changed the app center icon. There was also two drivers for intel and nvidia listed in the installed list, but they were not, I install both. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the system boots. The log-in screen is there, but when you log-in the display has black areas overtime the display my show the top menu, but it does not work. Them most of the time it kicks the system back to the log-in screen.&#xA;Not sure but I think it is the drivers, but I do not know how to remove them by hand.&lt;/p&gt;&#xA;" OwnerUserId="9811" LastActivityDate="2024-03-18T19:01:00.120" Title="pantheon haveing problems after upgrade" Tags="|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12044" PostTypeId="2" ParentId="12002" CreationDate="2017-05-20T17:42:04.317" Score="0" Body="&lt;p&gt;If it is actually an Asus laptop in terminal do&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill unblock bluetooth&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it isn't an Asus laptop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;blacklist asus-wmi&quot; | sudo tee /etc/modprobe.d/asus-blacklist.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-05-20T17:42:04.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12045" PostTypeId="1" CreationDate="2017-05-20T17:51:05.220" Score="0" ViewCount="237" Body="&lt;p&gt;Just installed elementary OS and system goes to sleep on any keyboard key press(system shuts down if a key is pressed at the login screen). Important to mention is that this only happens with the internal keyboard (the USB one works just fine). Laptop Asus vivobook E200HA&lt;/p&gt;&#xA;" OwnerUserId="9812" LastActivityDate="2019-08-25T01:01:55.523" Title="Laptop goes to sleep on any keyboard key press" Tags="|keyboard|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12048" PostTypeId="1" CreationDate="2017-05-20T21:29:39.363" Score="3" ViewCount="12498" Body="&lt;p&gt;I've installed elementary OS on my laptop but bluetooth doesn't recognize any device, can someone help me? I'm not expert with the ubuntu system...and sorry for my english&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 0a)&#xA;    Subsystem: Lenovo RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [17aa:3830]&#xA;    Kernel driver in use: r8169&#xA;    Kernel modules: r8169&#xA;04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]&#xA;    Subsystem: XAVi Technologies Corp. RTL8723BE PCIe Wireless Network Adapter [1b9a:2485]&#xA;    Kernel driver in use: rtl8723be&#xA;    Kernel modules: rtl8723be, wl&#xA;&#xA;&#xA;&#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 004: ID 04f2:b49f Chicony Electronics Co., Ltd &#xA;Bus 001 Device 003: ID 174f:1169 Syntek &#xA;Bus 001 Device 002: ID 062a:4102 Creative Labs &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&#xA;&#xA;&#xA;0: ideapad_wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: ideapad_bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;4: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&#xA;    [    0.160519] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored&#xA;[    0.364113] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge&#xA;[    1.466117] [Firmware Bug]: No valid trip found&#xA;[    2.610072] usb 1-4: Product: Bluetooth Radio &#xA;[   10.398181] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin&#xA;[   11.842460] Bluetooth: Core ver 2.21&#xA;[   11.842487] Bluetooth: HCI device and connection manager initialized&#xA;[   11.842493] Bluetooth: HCI socket layer initialized&#xA;[   11.842498] Bluetooth: L2CAP socket layer initialized&#xA;[   11.842508] Bluetooth: SCO socket layer initialized&#xA;[   12.626712] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723&#xA;[   12.626719] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin&#xA;[   12.698802] Bluetooth: hci0: rom_version status=0 version=1&#xA;[   17.016934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   17.016940] Bluetooth: BNEP filters: protocol multicast&#xA;[   17.016947] Bluetooth: BNEP socket layer initialized&#xA;[   19.079058] Bluetooth: hci0 command 0x0c56 tx timeout&#xA;[   38.328458] Bluetooth: RFCOMM TTY layer initialized&#xA;[   38.328470] Bluetooth: RFCOMM socket layer initialized&#xA;[   38.328483] Bluetooth: RFCOMM ver 1.11&#xA;[ 1171.588454] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723&#xA;[ 1171.588462] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin&#xA;[ 1171.589660] Bluetooth: hci0: rom_version status=0 version=1&#xA;[ 3599.475358] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723&#xA;[ 3599.475364] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin&#xA;[ 3599.476353] Bluetooth: hci0: rom_version status=0 version=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Results from &lt;code&gt;dmesg | grep 'usb 1-4'&lt;/code&gt;&#xA;&lt;pre&gt;&lt;code&gt;[ 2.432072] usb 1-4: new full-speed USB device number 4 using xhci_hcd &#xA;[ 2.561475] usb 1-4: New USB device found, idVendor=04f2, idProduct=b49f &#xA;[ 2.561481] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 &#xA;[ 2.561484] usb 1-4: Product: Bluetooth Radio &#xA;[ 2.561487] usb 1-4: Manufacturer: Realtek &#xA;[ 2.561489] usb 1-4: SerialNumber: 00e04c000001 &#xA;[16443.840076] usb 1-4: reset full-speed USB device number 4 using xhci_hcd &#xA;[41178.579274] usb 1-4: reset full-speed USB device number 4 using xhci_hcd&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9819" LastEditorUserId="9819" LastEditDate="2017-05-22T14:40:09.350" LastActivityDate="2017-11-05T10:39:14.010" Title="Bluetooth not work on elementary os 0.4 Loki" Tags="|bluetooth|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12051" PostTypeId="2" ParentId="12048" CreationDate="2017-05-21T02:19:38.850" Score="0" Body="&lt;p&gt;I was having difficulty with bluetooth as well and the solution offered up worked, AND it seems to have cured the graphical bluetooth manager too... Here is the link to the thread &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12027/bluetooth-manager-requests-use-of-pin-to-pair-headphones-elementaryos/12041?noredirect=1#comment15329_12041&quot;&gt;Bluetooth manager requests use of pin to pair headphones - elementaryOS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9802" LastEditorUserId="578" LastEditDate="2017-05-21T08:21:10.427" LastActivityDate="2017-05-21T08:21:10.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12053" PostTypeId="2" ParentId="12048" CreationDate="2017-05-21T08:26:21.990" Score="4" Body="&lt;p&gt;maybe your bluetooth is soft blocked? try :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it is blocked, try this command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill unblock bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hope it helps!&lt;/p&gt;&#xA;" OwnerUserId="9769" LastActivityDate="2017-05-21T08:26:21.990" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12054" PostTypeId="1" CreationDate="2017-05-21T08:27:46.970" Score="0" ViewCount="2036" Body="&lt;p&gt;How do I create a 8Gb USB bootable from Windows 8.1 64bit, in persistent mode?  &lt;/p&gt;&#xA;" OwnerUserId="9827" LastEditorUserId="19360" LastEditDate="2019-12-10T02:14:26.220" LastActivityDate="2019-12-10T02:14:26.220" Title="How to create bootable USB key in persistent mode from Windows 8.1 64bit?" Tags="|system-installation|usb-drive|" AnswerCount="4" CommentCount="0" ClosedDate="2019-12-10T02:18:20.070" ContentLicense="CC BY-SA 3.0" />
  <row Id="12055" PostTypeId="1" CreationDate="2017-05-21T08:36:10.320" Score="1" ViewCount="1977" Body="&lt;p&gt;Is there a terminal command?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For istance, when i type: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sleep 1 &amp;amp;&amp;amp; xset dpms force off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It turns off the display but enables automatically the screenlock (that instead I'd like to keep just when the computer is inactive).&lt;/p&gt;&#xA;" OwnerUserId="8698" LastActivityDate="2017-05-21T12:59:40.200" Title="Turn off display without screenlock" Tags="|display|command-line|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12056" PostTypeId="2" ParentId="11816" CreationDate="2017-05-21T08:58:47.823" Score="-1" Body="&lt;p&gt;I made a bootable usb of 64-bit Loki and it only showed a blinking cursor on my 64-but compatible AMD A4-3300 desktop. Same usb worked on my newer i7 laptop. I heard that ubuntu 16.04 had a change in amd drivers (&lt;a href=&quot;https://askubuntu.com/questions/744050/im-using-ubuntu-16-04-and-theres-no-fglrx&quot;&gt;https://askubuntu.com/questions/744050/im-using-ubuntu-16-04-and-theres-no-fglrx&lt;/a&gt;) I don't know how to force it to use the new open source drivers as this is a live usb which cannot even boot up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: i tried turning off integrated graphics (it has integrated radeon) but it caused the computer to not display anything, even the bios.&lt;/p&gt;&#xA;" OwnerUserId="9828" LastActivityDate="2017-05-21T08:58:47.823" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12057" PostTypeId="2" ParentId="12055" CreationDate="2017-05-21T08:59:44.707" Score="2" Body="&lt;p&gt;&lt;code&gt;xset dpms force off&lt;/code&gt;&lt;br&gt;&#xA;Also disable &quot;Lock after screen turns off&quot; in System Settings &gt; Security &amp;amp; Privacy &gt; Locking.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-05-21T08:59:44.707" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12058" PostTypeId="2" ParentId="12054" CreationDate="2017-05-21T10:27:08.557" Score="1" Body="&lt;p&gt;&lt;strong&gt;Persistent LiveUSB&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try &lt;a href=&quot;https://unetbootin.github.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Unetbootin&lt;/a&gt; or &lt;a href=&quot;https://sourceforge.net/projects/multisystem/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MultiSystem&lt;/a&gt; to create the LiveUSB. Both have option to keep changes in Ubuntu-based distros, including elementary. I succesfully installed new apps and packages in Live sessions created by these tools, although not all programs were able to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Direct installation on USB drive&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing the OS directly to USB drive is a bit more tricky. You basically have to select proper USB drive during install of the OS and also put bootloader on the same drive (this option is available when you make your partition scheme manually during install by choosing the &quot;something else&quot; option). You will also have to adjust some Bios settings to boot from this drive (that may apply for the LiveUSB method above, too).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UQHio.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UQHio.png&quot; alt=&quot;in this step you choose &amp;quot;something else&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Dx0ai.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Dx0ai.jpg&quot; alt=&quot;here you have to select correct USB drive and also put bootloader on it&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I failed the one time I tried this (with elementary Freya), although I think it was the machine's fault (cheap Acer netbook, all distros were weird with it).&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2017-05-21T10:27:08.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12059" PostTypeId="2" ParentId="10809" CreationDate="2017-05-21T12:02:58.840" Score="1" Body="&lt;p&gt;Hi I just received my XPS15 9560 as well and installed Elementary OS dual booting with windows (And of course run into the same issues as you).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;You need to install Elementary in UEFI mode and not in legacy mode&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the bios you need to disable secure boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also (&lt;strong&gt;an absolute MUST&lt;/strong&gt;) you need to switch your disk from RAID driver to AHCI, without it you won't be able to install on UEFI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://triplescomputers.com/blog/uncategorized/solution-switch-windows-10-from-raidide-to-ahci-operation/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Switch from RAID to AHCI&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also had to repeat the procedure twice, don't know if this was my fault or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I don't remember the exact menu option where you set your disk driver type, let me know if you cant find it and ill look it up.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you boot into Elementary installation, if you already freed some space, it will even prompt you to install Elementary in a dual boot with windows without requesting to create specific partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if you need further help&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-21T12:02:58.840" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12060" PostTypeId="1" CreationDate="2017-05-21T12:26:00.880" Score="1" ViewCount="526" Body="&lt;p&gt;I installed wine, but the best I get is a blank screen for &lt;code&gt;wine notepad&lt;/code&gt;.&lt;a href=&quot;https://i.stack.imgur.com/NupIN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NupIN.png&quot; alt=&quot;No other application opens&quot;&gt;&lt;/a&gt;&#xA;Wine itself does not start. It just shows an icon in the dock but no window opens. I initially installed using a binary, but seeing this problem, I uninstalled it and reinstalled using &lt;code&gt;apt-get&lt;/code&gt;. However, after reinstallation, nothing changed. The problem remained. Any help will be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="8931" LastActivityDate="2024-03-27T13:03:25.387" Title="Wine not working in 0.4 Loki" Tags="|release-loki|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12062" PostTypeId="2" ParentId="12055" CreationDate="2017-05-21T12:59:40.200" Score="1" Body="&lt;p&gt;Actually, the lowest brightness level on elementary turns off the display. &lt;a href=&quot;https://elementaryos.stackexchange.com/q/1311/8931&quot;&gt;This question&lt;/a&gt; covers how to change brightness using command line.&lt;/p&gt;&#xA;" OwnerUserId="8931" LastActivityDate="2017-05-21T12:59:40.200" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="12063" PostTypeId="2" ParentId="7212" CreationDate="2017-05-21T15:36:08.913" Score="-1" Body="&lt;p&gt;You can't install a newest version of eclipse until you see a newest version in AppCenter&#xA;When it will be a newest version clik on it than click update and that's it.&#xA;I think you can install packages, but I'm not sure.&#xA;BTW: Don't get mad! Have a nice day!&lt;/p&gt;&#xA;" OwnerUserId="9594" LastActivityDate="2017-05-21T15:36:08.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12066" PostTypeId="2" ParentId="12048" CreationDate="2017-05-21T20:48:16.013" Score="1" Body="&lt;p&gt;I think I have a solution.&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-generic git build-essential&#xA;git clone &lt;a href=&quot;https://github.com/jeremyb31/bluetooth-4.4.git&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jeremyb31/bluetooth-4.4.git&lt;/a&gt;&#xA;cd bluetooth-4.4&#xA;cp /usr/src/linux-headers-$(uname -r)/.config ./&#xA;cp /usr/src/linux-headers-$(uname -r)/Module.symvers Module.symvers&#xA;make -C /lib/modules/$(uname -r)/build M=$(pwd) modules&#xA;sudo cp btusb.ko /lib/modules/$(uname -r)/kernel/drivers/bluetooth/&#xA;sudo modprobe -r btusb&#xA;sudo modprobe btusb&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should work but it will have to be compiled again for new kernels, when a new kernel is installed bluetooth will not function until you&#xA;&lt;pre&gt;&lt;code&gt;cd bluetooth-4.4&#xA;make -C /lib/modules/$(uname -r)/build M=$(pwd) clean&#xA;cp /usr/src/linux-headers-$(uname -r)/.config ./&#xA;cp /usr/src/linux-headers-$(uname -r)/Module.symvers Module.symvers&#xA;make -C /lib/modules/$(uname -r)/build M=$(pwd) modules&#xA;sudo cp btusb.ko /lib/modules/$(uname -r)/kernel/drivers/bluetooth/&#xA;sudo modprobe -r btusb&#xA;sudo modprobe btusb&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-05-21T20:48:16.013" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="12067" PostTypeId="2" ParentId="11987" CreationDate="2017-05-21T22:22:29.697" Score="1" Body="&lt;p&gt;Looks like you added the AppCenter repo when we were still in beta. You'll need to edit your apt sources list (&lt;code&gt;/etc/apt/sources.list&lt;/code&gt;) to refer to &lt;code&gt;http&lt;/code&gt; instead of &lt;code&gt;https&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have &lt;code&gt;software-properties-common&lt;/code&gt; you can do this with the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository --remove 'deb [arch=amd64] https://packages.elementary.io/appcenter xenial main'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2017-05-21T23:18:28.603" LastActivityDate="2017-05-21T23:18:28.603" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12068" PostTypeId="2" ParentId="7859" CreationDate="2017-05-22T02:41:16.577" Score="-1" Body="&lt;p&gt;IMAP EN HOTMail&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Servidor de IMAP: imap-mail.outlook.com&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Puerto de IMAP: 993&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cifrado: SSL&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SMTP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Servidor de SMTP: smtp-mail.outlook.com&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Puerto de SMTP: 587&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cifrado: STARTTLS&lt;/p&gt;&#xA;" OwnerUserId="9835" LastActivityDate="2017-05-22T02:41:16.577" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12069" PostTypeId="2" ParentId="5597" CreationDate="2017-05-22T02:48:26.480" Score="0" Body="&lt;p&gt;Servidor de IMAP: imap-mail.outlook.com&#xA;Puerto de IMAP: 993&#xA;Cifrado: SSL&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Servidor de SMTP: smtp-mail.outlook.com&#xA;Puerto de SMTP: 587&#xA;Cifrado: STARTTLS&lt;/p&gt;&#xA;" OwnerUserId="9835" LastActivityDate="2017-05-22T02:48:26.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12070" PostTypeId="1" CreationDate="2017-05-22T03:59:46.423" Score="1" ViewCount="78" Body="&lt;p&gt;Why not create a battery manager? The battery with the elementary lasts half as long as with Windows 10. create a battery manager like Windows, to save battery ... would be the first linux to do thiss.&lt;/p&gt;&#xA;" OwnerUserId="9837" LastActivityDate="2017-05-22T03:59:46.423" Title="Why not create a battery manager?" Tags="|battery|" AnswerCount="0" CommentCount="2" ClosedDate="2017-05-23T22:19:48.363" ContentLicense="CC BY-SA 3.0" />
  <row Id="12071" PostTypeId="1" CreationDate="2017-05-22T04:06:34.807" Score="0" ViewCount="2232" Body="&lt;p&gt;guys i can't copy &amp;amp; paste file from computer to usb it's says&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SnqVc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SnqVc.png&quot; alt=&quot;can&amp;#39;t copy file to usb&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i already tried gksudo nautilus, and open as administrator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="9838" LastActivityDate="2018-02-11T18:30:43.797" Title="Can't copy &amp; paste file from comp to usb" Tags="|release-loki|settings|pantheon-files|folder|permissions|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12072" PostTypeId="1" AcceptedAnswerId="12073" CreationDate="2017-05-22T07:40:21.410" Score="3" ViewCount="9778" Body="&lt;p&gt;I am unable to add a printer as the 'Add' button is greyed out. Its an HP Deskjet 3520 - I'd like to connect to it wirelessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KL3uo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KL3uo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2021-05-20T15:09:24.543" Title="Unable to add printer" Tags="|networking|printer|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12073" PostTypeId="2" ParentId="12072" CreationDate="2017-05-22T08:33:19.453" Score="6" Body="&lt;p&gt;The &lt;code&gt;Connection&lt;/code&gt; field should contain the protocol and the local address of the printer, something like &lt;code&gt;socket://hostname&lt;/code&gt; or &lt;code&gt;http://hostname:631/ipp/&lt;/code&gt;.&#xA;There are several ways to try:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Use &lt;code&gt;sudo hp-setup -i&lt;/code&gt; in Terminal and follow the instructions  &lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;a href=&quot;http://localhost:631&quot; rel=&quot;noreferrer&quot;&gt;CUPS&lt;/a&gt; and add the printer from here&lt;/li&gt;&#xA;&lt;li&gt;Find your printer's local IP or (preferably) assign a static IP (either using your router's configuration or the printer's menu) and use that in the Connection field&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install hplip-gui &amp;amp;&amp;amp; hplip-gui&lt;/code&gt; and follow the instructions (also installs a lot of dependencies and requires a temporary USB connection to the printer)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-22T08:33:19.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12074" PostTypeId="1" AcceptedAnswerId="12083" CreationDate="2017-05-22T11:19:40.313" Score="1" ViewCount="592" Body="&lt;p&gt;after running the elementaryOS update which brings the new AppCenter, I found in the update tab a new section &quot;drivers&quot;. It offers in my case to install (not update) three drivers: intel-microcode, nvidia-340 and nvidia-375. I have a notebook with intel on-chip-grafic and an external nvidia grafic chip (geforce 840M). So two drivers, one for intel and one for nvidia seems ok but do I really need two drivers for nvidia? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Normally I tend to accept all updates suggested on the update tab, while I am used to choose from the software options presented on the other tab (startpage) for what I think could be useful to me. So I am puzzled, if the new AppCenter offers on the update tab options that are not made for my computer or if it detects my hardware and I should follow the suggestions and install two different drivers for the nvidia-grafic-card?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the ubuntu help-page I found the information, that I would need for the nvidia geforce 400 to 1000 series the 375 driver (see &lt;a href=&quot;https://wiki.ubuntuusers.de/Grafikkarten/Nvidia/nvidia/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntuusers.de/Grafikkarten/Nvidia/nvidia/&lt;/a&gt;) I did not found any information, that I should install two different drivers.&#xA;I installed the intel and the nvidia-375 drivers and it seems to work. But still I am puzzled if I need to install the second nvidia-driver, since it is still offered on every system update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running elementary OS 0.4.1 Loki on acer TMP645 with  i7-5500U CPU @ 2.40GHz and Intel Corporation Broadwell-U Integrated Graphics (rev 09)&#xA;NVIDIA Corporation GM108M [GeForce 840M] (rev a2)&lt;/p&gt;&#xA;" OwnerUserId="3136" LastActivityDate="2017-05-22T18:19:49.787" Title="driver update selection in new AppCenter - do I need two nvidia drivers (340 375)?" Tags="|updates|appcenter|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12077" PostTypeId="1" CreationDate="2017-05-22T11:42:18.907" Score="0" ViewCount="151" Body="&lt;p&gt;I have a SSD and not much space for temporary files with more then 2GB.&#xA;My elementary OS partition is only 18GB and i have a lot software installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to prevent temporary files from growing above 2GB or less?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And what is &quot;Rotated logs&quot; logging, only the Firewall?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yGVmw.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yGVmw.jpg&quot; alt=&quot;BleachBit - System Rotated logs 12GB&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9188" LastActivityDate="2018-01-18T06:24:16.480" Title="System Rotated logs 12GB why? found with BleachBit" Tags="|firewall|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12079" PostTypeId="2" ParentId="478" CreationDate="2017-05-22T12:38:48.880" Score="0" Body="&lt;p&gt;I had the same problem where my function keys suddenly stopped working with brightness levels.  For me the fix was simple:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo manual | sudo tee /etc/init/brightness.override&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart machine&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-05-22T12:38:48.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12080" PostTypeId="2" ParentId="8858" CreationDate="2017-05-22T14:06:24.447" Score="0" Body="&lt;p&gt;I too had the same problem loading the entire Libre Office suite from the app center.  After uninstalling the suite and reinstalling the components separately from the app center, I was able to get all of the components working properly.  Thanks for the suggestion and I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="9843" LastActivityDate="2017-05-22T14:06:24.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12082" PostTypeId="1" CreationDate="2017-05-22T17:54:30.360" Score="3" ViewCount="649" Body="&lt;p&gt;I've got eOS (0.4.1 Loki) on my Desktop and Laptop at this time. On my Laptop when I leave it open for some time it goes to a stage like sleep, only I can't recover it. I am seeing a white underscore on the top right corner of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried all kind of schortcuts but nothing works. I can recover only if I hard close the system from the power button or sometimes if i press it once and go to sleep. Then I re open it and everything works fine.&lt;/p&gt;&#xA;" OwnerUserId="9846" LastActivityDate="2024-01-21T22:00:35.070" Title="Can't recover after sleep" Tags="|release-loki|suspend|laptop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12083" PostTypeId="2" ParentId="12074" CreationDate="2017-05-22T18:19:49.787" Score="2" Body="&lt;p&gt;No, you don't need to and, in fact, you can't have multiple versions of a driver installed. You have an option to install other versions because the newest drivers do not always work best. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you run into any problems with nvidia drivers you can install older versions and see how they work. A currently installed version will be replaced automatically.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-22T18:19:49.787" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12084" PostTypeId="2" ParentId="12043" CreationDate="2017-05-22T18:30:50.183" Score="0" Body="&lt;p&gt;I think you have the same problem as I had. look at my &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11961/nvidia-driver-pantheon-doesnt-launch-after-apt-upgrade&quot;&gt;question&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what you should do: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot up the system, wait until that black screen. You may have to&#xA;wait after that a little more, while it tries to launch graphical&#xA;desktop.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt; and you'll be switched to tty1: a console&#xA;without graphical environment. There you be able to should log in. It may fail for the first few times. If so just try several times more.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then you remove everything nvidia related. Run &lt;code&gt;sudo apt purge *nvidia*&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-22T18:30:50.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12085" PostTypeId="1" AcceptedAnswerId="12086" CreationDate="2017-05-22T20:22:53.970" Score="4" ViewCount="101" Body="&lt;p&gt;If I run into a Terminal command here in StackExchange or elsewhere on the Internet, how can I easily understand what this command will do so that I can make sure it's safe before I run it?&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-05-22T20:22:53.970" Title="How can I find out what a Terminal command will do before I run it?" Tags="|pantheon-terminal|command-line|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12086" PostTypeId="2" ParentId="12085" CreationDate="2017-05-22T20:22:53.970" Score="5" Body="&lt;p&gt;There's a great online tool called &lt;a href=&quot;https://explainshell.com&quot; rel=&quot;noreferrer&quot;&gt;ExplainShell&lt;/a&gt; that will break down the command into its individual parts and explain what each part does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, see &lt;a href=&quot;https://explainshell.com/explain?cmd=sudo+add-apt-repository+--remove+%27deb+%5Barch%3Damd64%5D+https%3A%2F%2Fpackages.elementary.io%2Fappcenter+xenial+main%27&quot; rel=&quot;noreferrer&quot;&gt;this page&lt;/a&gt; which explains the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository --remove 'deb [arch=amd64] https://packages.elementary.io/appcenter xenial main'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-05-22T20:22:53.970" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12087" PostTypeId="1" AcceptedAnswerId="12203" CreationDate="2017-05-22T21:23:45.930" Score="1" ViewCount="3472" Body="&lt;p&gt;I know there are a lot of posts asking for help on this, but anything had worked for me, so I ask for myself again...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a laptop with intel graphics and a nvidia gt 720m. I have problems of tearing on the screen. I selected in software &amp;amp; updates the latest (381.22) version of the nvidia drivers, I launched nvidia-settings but there is no &quot;Sync to Vblank&quot; option, and nothing seems like it. So, anyone has a possible solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could I edit the xorg.conf and add the line that enables the &quot;Sync to Vblank&quot; option?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-05-29T21:06:18.637" Title="Screen tearing on Loki [nvidia]" Tags="|display|nvidia|graphics|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12089" PostTypeId="2" ParentId="12077" CreationDate="2017-05-22T23:40:07.277" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;How to prevent temporary files from growing above 2GB or less?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You are probably pertaining to the log files. The most trustworthy way to prevent log files eating the rest of your disk space is mounting your &lt;code&gt;/var/log&lt;/code&gt; directory on a 2GB partition. This might require repartitioning and might be harder if you have no spare unpartitioned space on disk and haven't setup LVM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How long does it take to accumulate that 12GB worth of log files? If the answer is less than a week, then you probably have an erratic/misconfigured hardware/driver/software that constantly pushes something on your logs. You probably should start with what's causing your logs to be big.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;And what is &quot;Rotated logs&quot; logging, only the Firewall?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Rotated logs are simply archived log files. You can safely delete them if you don't need to diagnose your system's status on the past few days.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure what you meant with &quot;only the Firewall&quot; though.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-05-22T23:40:07.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12092" PostTypeId="1" CreationDate="2017-05-23T03:28:28.277" Score="3" ViewCount="1394" Body="&lt;p&gt;While attempting to create the document Hello World app from the &lt;a href=&quot;https://elementary.io/docs/code/getting-started#hello-world&quot; rel=&quot;nofollow noreferrer&quot;&gt;developer docs&lt;/a&gt;, I found &lt;code&gt;elementary-sdk&lt;/code&gt; to be un-installable.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine-os:~$ sudo apt install elementary-sdk &#xA;[sudo] password for user:          &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; elementary-sdk : Depends: libgala-dev but it is not going to be installed&#xA;                  Depends: libgirepository1.0-dev but it is not going to be installed&#xA;                  Depends: libgranite-dev but it is not going to be installed&#xA;                  Depends: libgtk-3-dev but it is not going to be installed&#xA;                  Depends: libwingpanel-2.0-dev but it is not going to be installed&#xA;                  Depends: valac but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am running a fresh install of the latest version of elementaryOS:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BGjNW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BGjNW.png&quot; alt=&quot;about&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="9848" LastActivityDate="2020-08-11T08:19:34.337" Title="How do I install elementary-sdk?" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12095" PostTypeId="1" CreationDate="2017-05-23T12:45:38.550" Score="0" ViewCount="133" Body="&lt;p&gt;How can I install this app in my elementary os?&lt;/p&gt;&#xA;" OwnerUserId="9852" LastActivityDate="2017-05-30T19:57:08.023" Title="How can I install SABnzbd in elementary os" Tags="|applications|appcenter|elementary-project|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12096" PostTypeId="1" AcceptedAnswerId="12103" CreationDate="2017-05-23T14:12:48.873" Score="3" ViewCount="8898" Body="&lt;p&gt;Telegram desktop seems to be a standalone app. I downloaded the 64bit Linux tgz and unzipped it in my downloads folder. Running the telegram binary launches the app instead of installing it. An icon for the app also appears in the notifications panel when it's running. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my questions are...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it safe to run telegam from the home folder, or is there a preffered place for it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get it to permanently appear in the docker and/or application launcher? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to get it to launch at boot by adding the binary's path to the startup apps, but it doesn't seem to work. That is, the icon doesn't appear in the notifications bar. Any advice? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="9854" LastEditorUserId="84" LastEditDate="2018-05-06T18:07:28.843" LastActivityDate="2018-05-06T18:07:28.843" Title="Installing/configuring telegram" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12098" PostTypeId="2" ParentId="3027" CreationDate="2017-05-23T15:16:46.963" Score="1" Body="&lt;p&gt;As ansered by Jeroen, this is caused by nemo. I faced the same problem even in Loki. To fix this, I changed the .desktop file entry for nemo and added &lt;code&gt;nemo --no-desktop&lt;/code&gt; in the entry.&#xA;Use the following code to change the desktop files &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch /usr/share/applications/nemo-autostart.desktop&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and also change&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo scratch /usr/share/applications/nemo.desktop&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;change the value of exec to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Exec=nemo --no-desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6153" LastActivityDate="2017-05-23T15:16:46.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12099" PostTypeId="1" CreationDate="2017-05-23T15:45:47.273" Score="2" ViewCount="500" Body="&lt;p&gt;Ive setup my little debianserver as a dhcp/dns server using dnsmasq.&#xA;Everything is working perfectly fine, i do get an internal address assigned. I have a connection to the internet. The dns servers from my isp also work.&#xA;However despite it working elementaryOS tells me in the top right corner that i do not have an internet connection and in the network settings everything is Unknown. Yet when i type ifconfig in the terminal everything is configured properly.&#xA;This would not be a big deal since everything is mostly working, &lt;em&gt;BUT&lt;/em&gt; the AppCenter is not. I cannot download anything in the AppCenter anymore as it also complains about no internet connection.&#xA;The funny thing is the Network settings in elementaryos even seem to track how much i uploaded and downloaded in my current session, with my supposedly non-existent internet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thats the output of ifconfig in case this helps.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;eno1      Link encap:Ethernet  HWaddr 78:24:af:8a:e4:04  &#xA;          inet addr:192.168.1.100  Bcast:192.168.1.255  Mask:255.255.255.0&#xA;          inet6 addr: fe80::7a24:afff:fe8a:e404/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:18504 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:13314 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:20115123 (20.1 MB)  TX bytes:1612634 (1.6 MB)&#xA;          Interrupt:20 Memory:df100000-df120000 &#xA;&#xA;lo        Link encap:Local Loopback  &#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:198 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:198 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1 &#xA;          RX bytes:14610 (14.6 KB)  TX bytes:14610 (14.6 KB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9855" LastEditorUserId="9855" LastEditDate="2017-05-23T15:51:49.907" LastActivityDate="2017-09-21T23:02:57.890" Title="'no' internet connection within appcenter" Tags="|release-loki|networking|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12100" PostTypeId="1" CreationDate="2017-05-23T16:27:30.767" Score="1" ViewCount="38" Body="&lt;p&gt;My system is an Acer Inspiron E 15 which is running on Elementary OS Loki. The issue I've found that randomly started today was discovered during my use of Google Docs via Chrome. I clicked the right arrow key to navigate to a specific sentence and Music opens up instead of actually going right in Google Docs. Left works fine, but right seems to open up Music and I'm not sure why. I've looked at Keyboard Shortcuts but nothing is there. Any help would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; Now my left and right arrow key opens the Music app. Very strange.&lt;/p&gt;&#xA;" OwnerUserId="9856" LastEditorUserId="9856" LastEditDate="2017-05-23T16:39:35.530" LastActivityDate="2017-05-23T16:39:35.530" Title="Right Arrow Key Navigation Shortcut Issue" Tags="|release-loki|settings|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12101" PostTypeId="1" CreationDate="2017-05-23T18:19:59.410" Score="0" ViewCount="10615" Body="&lt;p&gt;I'm new to Linux and installed the newest elementary OS.&#xA;Then I installed some packages and I was told to restart my computer. But when I booted it up again, it stuck at the logo.&#xA;Then I pressed Windows+Tab, I guess, and this screen appeared.&#xA;What am I supposed to do?&#xA;Please help me guys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the picture: &lt;a href=&quot;https://ibb.co/jsDe3F&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ibb.co/jsDe3F&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9858" LastActivityDate="2019-12-07T21:00:50.070" Title="Failed to start Light Display Manager?" Tags="|boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12102" PostTypeId="1" CreationDate="2017-05-23T18:27:42.743" Score="0" ViewCount="515" Body="&lt;p&gt;So I recently bought a laptop :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;i7-6700HQ&lt;br&gt;&#xA;  16Go DDR4&lt;br&gt;&#xA;  Nvidia GeForce GTX 1070&lt;br&gt;&#xA;  SSD 250Go&lt;br&gt;&#xA;  HDD 2To  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It came without any installed operating system and I would like to run both Win10 and Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I have :&lt;/strong&gt;&lt;br&gt;&#xA;- Win10 installed on a 125Go partition (SSD)&lt;br&gt;&#xA;- Bootable USB with latest Elementary OS release&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I want :&lt;/strong&gt;&lt;br&gt;&#xA;- Win10&lt;br&gt;&#xA;- Elementary OS on the spare SSD's 125Go&lt;br&gt;&#xA;- A mean to choose which system to boot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Experienced problem :&lt;/strong&gt;&lt;br&gt;&#xA;When booting on the live Elementary USB I either get :&lt;br&gt;&#xA;- a completely black screen ;&lt;br&gt;&#xA;- a blinking 'e' splash screen ;&lt;br&gt;&#xA;- an underscore char and a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I already tried :&lt;/strong&gt;&lt;br&gt;&#xA;- Using rufus software and messing around with its settings to create the bootable USB&lt;br&gt;&#xA;- Editing the start command replacing 'quiet splash' with 'nomodeset'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't even get to run the live version... Elementary's logo keeps blinking over and over without going further... Doesn't my hardware have support for Elementary OS ? What am I missing ?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to install Elementary OS alongside Windows 10 by plugging-in an external display. However, my initial monitor (the laptop's one) still isn't recognized by eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing Nvidia additional drivers as in &lt;a href=&quot;https://elementaryforums.com/index.php?threads/howto-install-nvidia-amd-driver-in-elementaryos-the-official-way.206/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?threads/howto-install-nvidia-amd-driver-in-elementaryos-the-official-way.206/&lt;/a&gt;&lt;br&gt;&#xA;Still no luck...&lt;br&gt;&#xA;Any help on &lt;strong&gt;how to properly detect my laptop display&lt;/strong&gt; would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop's monitor is working at splash screen ('e' logo showing) but nothing else happens unless I plug an external HDMI display.&lt;/p&gt;&#xA;" OwnerUserId="8394" LastEditorUserId="8394" LastEditDate="2017-05-24T12:12:45.633" LastActivityDate="2020-02-25T13:48:31.587" Title="Laptop display not recognized - Dual boot elementary and Windows 10" Tags="|display|dual-boot|uefi|laptop|microsoft-windows|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12103" PostTypeId="2" ParentId="12096" CreationDate="2017-05-23T18:48:08.197" Score="4" Body="&lt;p&gt;If you downloaded Telegram from Telegram's website, it should be safe to run from anywhere on your system, including the home folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you open Telegram, an icon should appear in the dock. You can right click that icon and select &quot;Keep In Dock&quot; to keep it in the dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JhwID.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JhwID.png&quot; alt=&quot;Keep In Dock&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to have Telegram appear in Slingshot (the application launcher), you'll need to make a &lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow noreferrer&quot;&gt;desktop entry&lt;/a&gt; and place it in either &lt;code&gt;/usr/share/applications/&lt;/code&gt; or &lt;code&gt;~/.local/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or you can install Telegram from a PPA and it will do all of this for you.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Telegram from a PPA, open Terminal and run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:atareao/telegram &amp;amp;&amp;amp; sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install telegram&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you install Telegram from the PPA, you can easily add it to your startup applications.&lt;/p&gt;&#xA;" OwnerUserId="9848" LastActivityDate="2017-05-23T18:48:08.197" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12110" PostTypeId="2" ParentId="12092" CreationDate="2017-05-24T06:42:08.410" Score="1" Body="&lt;p&gt;You might want to try to install the dependency packages one by one, trying to locate what causes the error. Like what does     &lt;code&gt;sudo apt install libgala-dev&lt;/code&gt;&#xA;say and so on with all packages. This way you should be able to locate the glitch.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-24T06:42:08.410" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12111" PostTypeId="1" CreationDate="2017-05-24T09:05:50.767" Score="0" ViewCount="347" Body="&lt;p&gt;I am facing a problem in that after turning off wireless I can not reactivate from the wingpanel! When I click on the wireless switch in the network nothing happens and I have to enter network settings to be able to reactivate and this is annoying. Need help&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="8524" LastActivityDate="2017-07-15T05:15:30.000" Title="Can't activate wireless from WingPanel" Tags="|wingpanel|wifi|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12112" PostTypeId="2" ParentId="12111" CreationDate="2017-05-24T09:49:52.460" Score="2" Body="&lt;p&gt;That's a &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network/issues/16&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug&lt;/a&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's even a possible solution in there, but sadly nobody from the elementary team decided to fix it...&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-05-24T09:49:52.460" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12113" PostTypeId="2" ParentId="12095" CreationDate="2017-05-24T09:56:56.927" Score="1" Body="&lt;p&gt;Open AppCentre and search for sabnzbd. Then click on &quot;free&quot; and it will install.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can use the command line as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install sabnzbdplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="26" LastEditDate="2017-05-30T19:57:08.023" LastActivityDate="2017-05-30T19:57:08.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12115" PostTypeId="1" AcceptedAnswerId="12116" CreationDate="2017-05-24T12:11:38.650" Score="0" ViewCount="572" Body="&lt;p&gt;I am interested in following the development of Pantheon. I assumed there was a GitHub repo but couldn't seem to find it. Can anyone help?&lt;/p&gt;&#xA;" OwnerUserId="9869" LastActivityDate="2017-05-24T13:18:06.483" Title="Where is the pantheon GitHub repository?" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12116" PostTypeId="2" ParentId="12115" CreationDate="2017-05-24T13:18:06.483" Score="3" Body="&lt;p&gt;Here is the repository of elementary.&#xA;&lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;github repository&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-05-24T13:18:06.483" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12117" PostTypeId="2" ParentId="12102" CreationDate="2017-05-24T15:18:14.803" Score="1" Body="&lt;p&gt;Your graphics card should be perfectly supported. I also have a 1070 in my desktop PC and assuming your information is correct you also have the desktop card in your notebook.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dont know if this will work but try installing the newest NVIDIA driver like this in the terminal.&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*   # removes old driver and all the configs&#xA;sudo add-apt-repository ppa:graphics-drivers/ppa       # adds repository&#xA;sudo apt-get update    # to update the repository you just added&#xA;sudo apt-get dist-upgrade # when youre at it you might as well run this to ensure you run the latest OS version&#xA;sudo apt-get install nvidia-375 # to install the driver again as of right now 375 is the newest stable version you can look that up on the nvidia website&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9855" LastEditorUserId="29" LastEditDate="2020-02-25T13:48:31.587" LastActivityDate="2020-02-25T13:48:31.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12120" PostTypeId="1" AcceptedAnswerId="12121" CreationDate="2017-05-24T16:52:01.367" Score="0" ViewCount="58" Body="&lt;p&gt;I have been getting a lot(2+ per day) of Operating System Updates recently but since there is no info along with the updates I don't know if they are just failing to download and accumulating into a later one or something. The amount of notifications is starting to bother me. I won't mind if the updates are legitimate. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For apps there is a version number but not for OS updates. Is there any way to check updates that have been released?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it would be nice if there was a small change log attached to each update.&lt;/p&gt;&#xA;" OwnerUserId="9873" LastActivityDate="2017-05-24T17:08:49.893" Title="Lots of updates but don't know if they are working" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12121" PostTypeId="2" ParentId="12120" CreationDate="2017-05-24T17:08:49.893" Score="2" Body="&lt;p&gt;If you go to the terminal prior to updating you can use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt list --upgradable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it will show you the list of packages that are available for update.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-24T17:08:49.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12123" PostTypeId="1" CreationDate="2017-05-24T18:23:46.110" Score="1" ViewCount="175" Body="&lt;p&gt;For quite a days now I am having this sort-of bug in elementary OS whereby If I put my laptop to lock mode for a long period (like overnight) each and every applications are closed by elementary OS. I have disabled suspend and my hardware doesn't support &quot;halt&quot;, So I put my laptop always to lock mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;N.B: I am using a custom kernel by Xanmod&lt;/p&gt;&#xA;" OwnerUserId="8274" LastEditorUserId="308" LastEditDate="2018-08-07T16:48:35.153" LastActivityDate="2023-12-11T08:05:10.660" Title="How to prevent elementary OS from closing all applications after waking a long lock period?" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="12124" PostTypeId="2" ParentId="12099" CreationDate="2017-05-24T20:24:58.553" Score="2" Body="&lt;p&gt;I figured out what was causing the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default, if you even dare you mention a device inside /etc/network/interfaces at all, even if its just&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;auto eno1&#xA; iface eno1 inet dhcp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;something like this, witch is what i had put in there, NetworkManager will ignore the device (in my case eno1 aka my LAN) completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All i had to do is delete this from the file and then restart the network-manager service.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And appearently appcenter is one of the few applications that does not actually check if you have an internet connection, but instead just asks NetworkManager if it has an internet connection.&lt;/p&gt;&#xA;" OwnerUserId="9855" LastEditorUserId="9855" LastEditDate="2017-05-24T20:31:45.773" LastActivityDate="2017-05-24T20:31:45.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12126" PostTypeId="1" CreationDate="2017-05-24T23:23:54.380" Score="0" ViewCount="1347" Body="&lt;p&gt;so i installed on a freshly new ultrabook Asus Zenbook UX32A Elementary OS 0.4.1 Loki, and tried to install Google Chrome. Downloaded from offical site, install did nothing. Tried it via terminal multiple different install commands and only errors were popping out. Then i tried to at least download LibreOffice, firstly in AppCenter, then via terminal. Both ways the same error popped out. Third party software was checked in when i was installing OS. I have two separate drives, 24GB SSD and 500GB HDD. OS was installed onto HDD not SSD. Always says some kind of error over packages. I will be really glad if someone could help me, I am a newcommer from Windows. Thanks! (Also wanted to install Gdebi, but wont let me since NO apps can be downloaded and installed) :( &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Command &amp;amp; Error (same for every install of whatever it is): &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nodex@nodex:~/Downloads$ sudo apt install libreoffice&#xA;    Reading package lists... Done&#xA;    Building dependency tree       &#xA;    Reading state information... Done&#xA;    Some packages could not be installed. This may mean that you have&#xA;    requested an impossible situation or if you are using the unstable&#xA;    distribution that some required packages have not yet been created&#xA;    or been moved out of Incoming.&#xA;    The following information may help to resolve the situation:&#xA;&#xA;    The following packages have unmet dependencies:&#xA;     libreoffice : Depends: fonts-sil-gentium-basic but it is not installable&#xA;                   Depends: libreoffice-base but it is not going to be installed&#xA;                   Depends: libreoffice-calc but it is not going to be installed&#xA;                   Depends: libreoffice-core (= 1:5.1.6~rc2-0ubuntu1~xenial2) but it is not going to be installed&#xA;                   Depends: libreoffice-draw but it is not going to be installed&#xA;                   Depends: libreoffice-impress but it is not going to be installed&#xA;                   Depends: libreoffice-math but it is not going to be installed&#xA;                   Depends: libreoffice-report-builder-bin but it is not going to be installed&#xA;                   Depends: libreoffice-writer but it is not going to be installed&#xA;                   Depends: libreoffice-avmedia-backend-gstreamer but it is not going to be installed&#xA;                   Depends: fonts-dejavu but it is not installable&#xA;                   Depends: python3-uno (&amp;gt;= 4.4.0~beta2) but it is not going to be installed&#xA;                   Recommends: libreoffice-gnome but it is not going to be installed or&#xA;                               libreoffice-kde but it is not going to be installed&#xA;    E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wECCu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wECCu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9876" LastEditorUserId="9876" LastEditDate="2017-05-25T00:13:40.110" LastActivityDate="2018-08-04T21:58:03.490" Title="Cannot install .deb, applications and third party softwares" Tags="|software-installation|download|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12128" PostTypeId="1" CreationDate="2017-05-25T01:49:56.647" Score="0" ViewCount="152" Body="&lt;p&gt;When I click over shutdown on wingpanel nothing happens. It started two days ago after updating. The only way to shutdown is opening a terminal and run&lt;code&gt;sudo shutdown -h now&lt;/code&gt; &#xA;Any advise?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Translated from:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Al clickear sobre el icono de un botón, por ejemplo, shutdown, este no se ejecuta, queda fijo sin ejecutar la funcion para la que fue creado. Esta situación ha sucedido últimamente, pero hasta antes de ayer, funcionaba bien. Al parecer esto sucedió con las últimas actualizaciones. De todas maneras para apagarlo tengo que abrir el Terminal y apagar el equipo con el comando sudo shutdown -h now. Muchas gracias.  &lt;/p&gt;&#xA;" OwnerUserId="9877" LastEditorUserId="6398" LastEditDate="2017-05-28T21:18:22.373" LastActivityDate="2017-05-28T21:18:22.373" Title="Problem to shutdown from wingpanel" Tags="|release-loki|wingpanel|updates|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12129" PostTypeId="2" ParentId="12123" CreationDate="2017-05-25T04:18:28.440" Score="0" Body="&lt;p&gt;I don't know if the issue is related to the custom kernel&#xA;but I had an issue like that in elementary and it was fixed by the latest updates&#xA;so you can just&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-25T04:18:28.440" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12130" PostTypeId="1" AcceptedAnswerId="15470" CreationDate="2017-05-25T04:53:54.973" Score="2" ViewCount="1674" Body="&lt;p&gt;I am not able to update apps or the OS. &#xA;While upgrading from the terminal, I am getting this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Do you want to continue? [Y/n] y &#xA;&#xA;(Reading database ... 271161 files and directories currently installed.)&#xA;Preparing to unpack .../appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1_all.deb ...&#xA;&#xA;Unpacking appstream-data-pantheon (0.3.0-0~14~ubuntu0.4.1) ...&#xA;&#xA;dpkg: error processing archive /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1_all.deb (--unpack):&#xA;&#xA; trying to overwrite '/usr/share/app-info/yaml/pantheon_xenial-main_amd64.yml.gz', which is also in package appstream-data-pantheon-loki-stable 0.4+r13~ubuntu0.4.1&#xA;&#xA;Processing triggers for appstream (0.10.6-1~ubuntu16.04.2) ...&#xA;&#xA;AppStream cache update completed successfully.&#xA;&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1_all.deb&#xA;&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9881" LastEditorUserId="84" LastEditDate="2018-05-04T12:30:06.690" LastActivityDate="2018-05-04T12:30:06.690" Title="Why is my Elementary OS Not Updating via terminal / Apps are not updating from App Center?" Tags="|updates|apt|command-line|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12131" PostTypeId="2" ParentId="11281" CreationDate="2017-05-25T07:07:29.513" Score="0" Body="&lt;p&gt;But if you re-download the new version of 0.5 it will probably take even bigger amount of traffic...&#xA;I don't think theres a way around it &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-25T07:07:29.513" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12132" PostTypeId="2" ParentId="12130" CreationDate="2017-05-25T07:49:26.977" Score="4" Body="&lt;p&gt;Following what I've found about these topics, I think you either need to remove the conflicting package, or you need to overwrite it explicitly (I have no idea why its not an option that pops up while you are trying to install):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i --force-overwrite /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(&lt;a href=&quot;https://elementaryforums.com/index.php?threads/the-following-packages-have-unmet-dependencies-problem.2264/&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="84" LastEditDate="2018-05-04T12:26:48.350" LastActivityDate="2018-05-04T12:26:48.350" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12133" PostTypeId="1" CreationDate="2017-05-25T11:05:41.333" Score="2" ViewCount="769" Body="&lt;p&gt;How do I fix this?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; W: The repository 'https://packages.elementary.io/appcenter xenial Release' does not have a Release file.&#xA;&#xA; N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;&#xA; N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&#xA; E: Failed to fetch https://packages.elementary.io/appcenter/dists/xenial/xenial/binary-amd64/Packages  Protocol &quot;http&quot; not supported or disabled in libcurl&#xA;&#xA; E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9881" LastActivityDate="2017-06-01T07:20:03.893" Title="'packages.elementary.io/appcenter xenial Release' does not have a Release file" Tags="|updates|appcenter|ppa|" AnswerCount="1" CommentCount="2" ClosedDate="2019-04-30T07:35:09.043" ContentLicense="CC BY-SA 3.0" />
  <row Id="12138" PostTypeId="1" AcceptedAnswerId="12145" CreationDate="2017-05-25T16:16:38.483" Score="0" ViewCount="2518" Body="&lt;p&gt;I installed webstorm using &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3949/installing-phpstorm-webstorm-as-application&quot;&gt;directions&lt;/a&gt; on another question.  I launched intellij and webstorm at the same time the first time I launched webstorm.  Then my machine froze.  I had to hard restart.  Now webstorm will not launch from the applications menu.  I launched &lt;code&gt;/tmp/webstorm/bin/webstorm.sh&lt;/code&gt; and it re-opened webstorm.  I don't want to run a shell script to launch webstorm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I uninstall webstorm?  I want to redo the process.&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-06-03T01:49:20.113" Title="How to uninstall webstorm" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12139" PostTypeId="2" ParentId="9874" CreationDate="2017-05-25T17:05:54.987" Score="0" Body="&lt;p&gt;Just as completion to Jeremy31 post. On this date, when I tried using the fix, the apt-get command installs the 4.10 kernel, not 4.8. The WiFi somewhat works. I used the original firmware in that post and the 1.165 one from the same link folder. They both work pretty much the same. The WiFi is functional, but it has a big loading time for web pages. I do not know if this is because it has some drops or anything else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I used an answer, and not a comment, because my reputation is too low. Maybe worth mentioning: I have a Clevo P650 . Maybe guys buying the same hardware find this thread faster this way.&lt;/p&gt;&#xA;" OwnerUserId="9887" LastActivityDate="2017-05-25T17:05:54.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12140" PostTypeId="2" ParentId="12126" CreationDate="2017-05-25T19:00:44.760" Score="0" Body="&lt;p&gt;Not quite.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press Super (Windows key) + T for terminal&lt;/li&gt;&#xA;&lt;li&gt;type 'sudo dpkg -i ' and drag the file you want to install from a 'Files' window to the terminal&lt;/li&gt;&#xA;&lt;li&gt;Voilá&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Another possibility: simply install the elementary OS .deb installer called Eddy from the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="9888" LastEditorUserId="7847" LastEditDate="2018-08-04T21:58:03.490" LastActivityDate="2018-08-04T21:58:03.490" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12141" PostTypeId="2" ParentId="9053" CreationDate="2017-05-25T19:43:38.743" Score="2" Body="&lt;p&gt;I know this is an old question, but I thought I'd answer in case someone found it useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For just one album, the first option is always the &quot;View in columns&quot; mode. Select the album from the third top column and it'll stay confined to your choice. Same thing with artists/genres.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second one is as simple as using the searchbar. In any view, just type the name of the album and the list automatically narrows down to the songs in that album; same thing with artists/genres.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you want various albums or handpicked songs, it's not that complicated either (maybe a little bit tedious, though). Works this way:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make a new playlist (&quot;+&quot; Button on the bottom left corner &gt; &quot;Add Playlist&quot;.)&lt;/li&gt;&#xA;&lt;li&gt;Use the searchbar to find the album, and while on &quot;View as list&quot;, drag and drop the songs of your choice to your playlist on the sidebar.&lt;/li&gt;&#xA;&lt;li&gt;Repeat the last step to add any other. If you want the whole album, drag it and drop it to the playlist from the &quot;View as albums&quot; view.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I honestly don't have any complains about Noise in this regard, though I believe they could improve queue; that one is still kind of nonsense. &lt;/p&gt;&#xA;" OwnerUserId="9889" LastActivityDate="2017-05-25T19:43:38.743" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12142" PostTypeId="2" ParentId="2568" CreationDate="2017-05-25T19:44:19.060" Score="0" Body="&lt;p&gt;I encountered with the same issue. I unfortunately ran earlier that that the &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 777 -R .&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;command in my root directory, which changed all the permission on my computer, included my account. My account permission also change, therefore I was not allowed to log in into my account.&#xA;Solution:&#xA;When I ran the command again it solved the problem,I could log in into my account, but it's highly recommended to reinstall the compute for security reasons.&lt;/p&gt;&#xA;" OwnerUserId="9890" LastEditorUserId="578" LastEditDate="2017-05-25T20:29:39.903" LastActivityDate="2017-05-25T20:29:39.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12143" PostTypeId="2" ParentId="12126" CreationDate="2017-05-25T20:38:39.323" Score="1" Body="&lt;p&gt;Try fixing broken dependencies:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;br&gt;&#xA;And clean downloaded debs:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get autoclean&lt;/code&gt;&lt;br&gt;&#xA;Now update and upgrade:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If these steps do not work, please post the output from running:&lt;br&gt;&#xA;&lt;code&gt;cat /etc/apt/sources.list&lt;/code&gt;&lt;br&gt;&#xA;and&lt;br&gt;&#xA;&lt;code&gt;cat /etc/apt/sources.list.d/*&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-05-25T20:38:39.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12144" PostTypeId="2" ParentId="11308" CreationDate="2017-05-25T23:00:48.520" Score="0" Body="&lt;p&gt;allow usb boot change to efi or legacy, remember ( legacy first) secure boot or not should work. after bootin go back to boot settings if necessary and change the boot order. pick your SD or usb to go first one has the installation on it... same problem I think.&lt;/p&gt;&#xA;" OwnerUserId="9892" LastActivityDate="2017-05-25T23:00:48.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12145" PostTypeId="2" ParentId="12138" CreationDate="2017-05-26T01:59:52.517" Score="0" Body="&lt;p&gt;&lt;code&gt;rm -rf ~/.WebStorm2017.1/&lt;/code&gt; or whatever version you have intalled.  Then just re-run the installer.  Reinstalling corrected my installation failure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note:  Be sure to unpack the &lt;code&gt;webstorm.tar.gz&lt;/code&gt; files to a permanent location (not &lt;code&gt;/tmp&lt;/code&gt;) like &lt;code&gt;~/Applications&lt;/code&gt;.  This way webstorm will not delete itself when you close it &gt;.&amp;lt;&lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="9738" LastEditDate="2017-06-03T01:49:20.113" LastActivityDate="2017-06-03T01:49:20.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12148" PostTypeId="2" ParentId="12087" CreationDate="2017-05-26T06:38:54.887" Score="0" Body="&lt;p&gt;I also don't have this option in my Xserver UI (GTX 1050) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried enabling SyncToVBlank via compiz?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qu8Jv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qu8Jv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-26T06:38:54.887" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12149" PostTypeId="1" AcceptedAnswerId="12153" CreationDate="2017-05-26T10:02:23.210" Score="0" ViewCount="839" Body="&lt;p&gt;Help me please, my computer cannot access desktop and stuck after booting, just black screen. &lt;/p&gt;&#xA;" OwnerUserId="9899" LastActivityDate="2017-05-26T19:28:09.877" Title="Black screen after booting." Tags="|release-loki|boot|display|" AnswerCount="1" CommentCount="1" ClosedDate="2017-05-29T21:31:03.113" ContentLicense="CC BY-SA 3.0" />
  <row Id="12153" PostTypeId="2" ParentId="12149" CreationDate="2017-05-26T19:28:09.877" Score="0" Body="&lt;p&gt;After my install i believe i had the same problem.  When i installed my drivers a message popped up saying i needed to disable secure boot, i clicked the check mark and restarted and had a black screen with a flashing dash in the upper right corner.  What i had to do was reboot into BIOS, find the &quot;Secure Boot&quot; section and manually disable it, after that no more black screen for me, goodluck!&lt;/p&gt;&#xA;" OwnerUserId="9905" LastActivityDate="2017-05-26T19:28:09.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12154" PostTypeId="2" ParentId="12087" CreationDate="2017-05-26T20:21:27.207" Score="-1" Body="&lt;p&gt;This help my &lt;a href=&quot;https://www.cmscritic.com/how-to-fix-nvidia-screen-tearing-in-xfce-mate-kde-lxde-and-others/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cmscritic.com/how-to-fix-nvidia-screen-tearing-in-xfce-mate-kde-lxde-and-others/&lt;/a&gt;..........................&lt;/p&gt;&#xA;" OwnerUserId="9841" LastActivityDate="2017-05-26T20:21:27.207" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12155" PostTypeId="1" AcceptedAnswerId="10120" CreationDate="2017-05-27T02:30:15.867" Score="5" ViewCount="4980" Body="&lt;p&gt;When I restart my OS, I log in.  The desktop does not load for a full 2 minutes after typing my password. I can move my mouse and see my desktop background.  No apps. Happens pretty much every time I reboot.  I have a 2017 Dell XPS.  Performance is excellent other than this odd issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I figure out what is causing this?  How can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="45" LastEditDate="2018-03-11T02:18:19.557" LastActivityDate="2019-08-21T07:30:46.260" Title="Desktop takes forever to load after restart" Tags="|release-loki|wingpanel|plank|" AnswerCount="7" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="12156" PostTypeId="2" ParentId="12155" CreationDate="2017-05-27T02:52:29.163" Score="2" Body="&lt;p&gt;This is a known &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt;.  Apparently this issue also &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1599110/comments/17&quot; rel=&quot;nofollow noreferrer&quot;&gt;applies&lt;/a&gt; to Ubuntu. There is an assistive app in the autostart that runs terribly slow. I went to the startup directory:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd /etc/xdg/autostart/&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed the file extension for the problem file to effectively prevent it from starting&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo mv at-spi-dbus-bus.desktop at-spi-dbus-bus.desktop_DISABLED&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my machine boots in ~5 seconds vs 120 seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gnomeshell.wordpress.com/2011/08/28/manage-the-startup-applications/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AT SPI D-Bus Bus&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;AT SPI stands for Assistive Technology Service Provider Interface, a framework to integrate accessibility functions in applications. This command will create a new DBus for AT SPI specific functions.&#xA;Command: /usr/lib/at-spi2-core/at-spi-bus-launcher –-launch-immediately&#xA;Status: unwanted until you need the accessibility features.&#xA;Reference: https://www.linuxfoundation.org/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-05-27T02:52:29.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12158" PostTypeId="1" AcceptedAnswerId="12193" CreationDate="2017-05-27T06:58:21.230" Score="0" ViewCount="452" Body="&lt;p&gt;I am running on a freshly updated elementary OS 0.4.1 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to install the elementary-sdk, I get the following error message.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install elementary-sdk&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; elementary-sdk : Depends: libgala-dev but it is not going to be installed&#xA;                  Depends: libgranite-dev but it is not going to be installed&#xA;                  Depends: libgtk-3-dev but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Am I missing something here? Is there anything I can do to debug this issue and fix it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Added current active sources &amp;amp; sources.d&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current sources.list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/apt/sources.list | grep ^deb&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial universe&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;deb http://in.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu xenial-security universe&#xA;deb http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Current sources.d&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ tail -n +1 /etc/apt/sources.list.d/*.list&#xA;==&amp;gt; /etc/apt/sources.list.d/elementary.list &amp;lt;==&#xA;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&#xA;==&amp;gt; /etc/apt/sources.list.d/patches.list &amp;lt;==&#xA;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9538" LastEditorUserId="9538" LastEditDate="2017-05-29T10:42:19.130" LastActivityDate="2018-01-01T03:52:46.923" Title="Getting an error message when trying to install elementary-sdk - Some packages could not be installed" Tags="|release-loki|software-installation|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12159" PostTypeId="2" ParentId="7240" CreationDate="2017-05-27T07:18:26.833" Score="1" Body="&lt;p&gt;I had this happening to me when installing Ubuntu, &lt;strong&gt;I have not done it in ElementaryOS&lt;/strong&gt;, but I believe it should be the same thing on ElementaryOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;install Boot-Repair&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;connect to the Internet&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;open a new Terminal, then type the following commands (press Enter after each line):&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Using Boot-Repair&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recommended repair&lt;/p&gt;&#xA;&#xA;&lt;p&gt;launch Boot-Repair by typing 'boot-repair' in a terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click the &quot;Recommended repair&quot; button. When repair is finished, note the URL (paste.ubuntu.com/XXXXX) that appeared on a paper, then reboot and check if you recovered access to your OSs.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Warning: the default settings are the ones used by the &quot;Recommended&#xA;  Repair&quot;. Changing them may worsen your problem. Don't modify them&#xA;  before creating a BootInfo URL, and asking for advice on Ubuntu Forums&#xA;  Absolute Beginners Section or in Installation and Upgrades.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-27T07:18:26.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12163" PostTypeId="1" CreationDate="2017-05-27T13:12:00.377" Score="1" ViewCount="624" Body="&lt;p&gt;i just bought a new laptop and had install elementary os as a main boot. But i have a problem with bluetooth on my laptop. It keeps searching and no others bluetooth device detected. In this case , i want to send a file from my computer to my phone. Anyone have a solution?please help&lt;/p&gt;&#xA;" OwnerUserId="9915" LastEditorUserId="9915" LastEditDate="2017-05-27T13:17:08.873" LastActivityDate="2017-10-10T18:35:53.110" Title="Problem with finding bluetooth device" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12164" PostTypeId="1" AcceptedAnswerId="12168" CreationDate="2017-05-27T19:20:08.320" Score="2" ViewCount="2222" Body="&lt;p&gt;How to change &lt;code&gt;username&lt;/code&gt; on elementary OS — e.g. &lt;code&gt;linux@eos&lt;/code&gt; to &lt;code&gt;dago@eos&lt;/code&gt; properly?&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="16827" LastEditDate="2019-04-13T13:44:27.923" LastActivityDate="2019-04-13T13:44:27.923" Title="change username on elementary OS properly" Tags="|command-line|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12166" PostTypeId="2" ParentId="12087" CreationDate="2017-05-27T21:43:03.577" Score="0" Body="&lt;p&gt;You can enable, in the advanced properties of your graphic driver, the force pipeline rendering and force full pipeline rendering. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you confirm us in which application do you have the tearing issue ? &lt;/p&gt;&#xA;" OwnerUserId="443" LastActivityDate="2017-05-27T21:43:03.577" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12168" PostTypeId="2" ParentId="12164" CreationDate="2017-05-27T22:59:18.737" Score="6" Body="&lt;p&gt;This has been answered in &lt;a href=&quot;https://askubuntu.com/a/34075/422035&quot;&gt;another question on another StackExchange site&lt;/a&gt; but this is basically what you need to do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the user you need to modify is logged out and you're logged in as another sudoer user, do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -l newUsername oldUsername&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This changes your username but not your home folder. If you're okay with having a different home folder name from your username, you're pretty much done. Otherwise, refer to the linked answer for more details.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-05-27T22:59:18.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12169" PostTypeId="2" ParentId="7628" CreationDate="2017-05-28T01:36:57.993" Score="11" Body="&lt;p&gt;Building on @Fratink's answer, I ran these commands to fix the issue. (For some reasons, the &lt;code&gt;dconf-editor&lt;/code&gt; wasn't working for me.)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Volume down&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-down AudioLowerVolume&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Volume up&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-up AudioRaiseVolume&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-mute AudioMute&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="8796" LastEditorUserId="138" LastEditDate="2018-10-08T14:56:20.647" LastActivityDate="2018-10-08T14:56:20.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12170" PostTypeId="2" ParentId="12128" CreationDate="2017-05-28T05:56:59.813" Score="1" Body="&lt;p&gt;You can use the command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill wingpanel &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in a terminal window or with &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; to restart stuck wingpanel.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-28T05:56:59.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12173" PostTypeId="2" ParentId="12158" CreationDate="2017-05-28T14:49:04.953" Score="0" Body="&lt;p&gt;Are you using additional PPAs? If yes, try disabling all of them and see if the installation will proceed.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-05-28T14:49:04.953" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12174" PostTypeId="1" CreationDate="2017-05-28T15:47:33.497" Score="2" ViewCount="3319" Body="&lt;p&gt;Is there any way to add a launcher to the dock (optimally Slingshot, but any launcher would be great)?  It seems odd to me as a matter of design and efficiency to have to go to two different locations to launch applications. A single location in the dock would be great -- either as an option or as the default.    &lt;/p&gt;&#xA;" OwnerUserId="9489" LastEditorUserId="45" LastEditDate="2017-05-29T21:28:18.603" LastActivityDate="2018-10-18T07:00:09.873" Title="Can I add an app launcher (optimally Slingshot) to the Dock?" Tags="|plank|slingshot|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12175" PostTypeId="2" ParentId="11063" CreationDate="2017-05-28T17:10:16.330" Score="0" Body="&lt;p&gt;I've encountered the same issue.&#xA;I deleted contain of &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; directory by mistake.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add a file into &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; as named &lt;code&gt;appcenter.list&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Insert the line below into the file that's been created newly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deb http://packages.elementary.io/appcenter xenial main&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then try again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&#xA;&lt;code&gt;sudo apt-get install appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I overcame the issue by this way.&lt;/p&gt;&#xA;" OwnerUserId="7495" LastEditorUserId="7495" LastEditDate="2017-05-29T04:15:29.297" LastActivityDate="2017-05-29T04:15:29.297" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12176" PostTypeId="2" ParentId="11452" CreationDate="2017-05-28T18:44:08.907" Score="1" Body="&lt;p&gt;Update: Solved after update to new kernel 4.8 {linux-generic-hwe-16.04}&lt;/p&gt;&#xA;" OwnerUserId="9263" LastActivityDate="2017-05-28T18:44:08.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12177" PostTypeId="2" ParentId="11840" CreationDate="2017-05-28T19:08:06.187" Score="0" Body="&lt;p&gt;Have you tried installing with the default partitioning option? I had the same issue with Loki 0.4.1 until I used the default &quot;erase everything&quot; option and it installed fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had separate ext4 partitions for &lt;code&gt;/&lt;/code&gt;, &lt;code&gt;/home&lt;/code&gt; and swap. Also tried adding a separate &lt;code&gt;/boot&lt;/code&gt; but that didn't help either. The default option creates the following scheme:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo fdisk -l&#xA;Disklabel type: dos&#xA;Device      Boot    Size    Type&#xA;/dev/sda1   *       57.7G   Linux&#xA;/dev/sda2           2G      Extended&#xA;/dev/sda5           2G      Linux swap / Solaris&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't know what the deal is with sda2 because it's not mounted and does not show up with blkid:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo blkid&#xA;/dev/sda1:  TYPE=&quot;ext4&quot;&#xA;/dev/sda5:  TYPE=&quot;swap&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I wonder if it's a bug in the installer, I will investigate further and update the answer.&lt;/p&gt;&#xA;" OwnerUserId="4152" LastActivityDate="2017-05-28T19:08:06.187" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12178" PostTypeId="1" CreationDate="2017-05-28T23:18:18.700" Score="0" ViewCount="48" Body="&lt;p&gt;I'm having trouble visiting the website of elementary OS from Alexandria, Egypt&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is anyone else facing the same issue?&lt;/p&gt;&#xA;" OwnerUserId="9928" LastActivityDate="2017-05-29T04:11:03.387" Title="Elementary.io website is down in Egypt" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ClosedDate="2017-05-29T21:28:56.127" ContentLicense="CC BY-SA 3.0" />
  <row Id="12180" PostTypeId="1" CreationDate="2017-05-29T02:45:40.260" Score="0" ViewCount="641" Body="&lt;p&gt;I'm absolutely newbie in Linux world, and wanted to try it. By looking distros in the internet, came to Elementary OS which is I liked very much due its clean design.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, downloaded it (0.4.1), burned on USB stick, and installed.&#xA;Everything is fine, except that there is no Wi-Fi (and no Ethernet too).&#xA;Trying to googling it a bit, looks like this issue with my laptop (or specifically - BCM4350) is pretty common. Anyway, wasting almost 4 hours on it - I didn't fix it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then started looking for other distros, and downloaded Linux Mint Mate 18.1. Even didn't yet installed it (because it loaded into try-it mode immediately) - and woohoo - WiFi works just fine out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some screenshots that I made in Mint, maybe they will help you to solve it in a future Elementary update (if it works fine in Mint, why it can't work in Elementary?):&#xA;&lt;a href=&quot;https://puu.sh/w48z2/c7239d7cfe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://puu.sh/w48z2/c7239d7cfe.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://puu.sh/w48zy/dc20effede.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://puu.sh/w48zy/dc20effede.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. Main difference I noticed, is in Elementary it was: &quot;kernel modules: brcmfmac, wl&quot;, when in Mint its just &quot;brcmfmac&quot;.&lt;/p&gt;&#xA;" OwnerUserId="9930" LastActivityDate="2024-03-24T11:00:35.067" Title="Dell XPS 13 9350 WiFi does not work" Tags="|wifi|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12181" PostTypeId="1" CreationDate="2017-05-29T02:58:47.397" Score="1" ViewCount="128" Body="&lt;p&gt;I'm a new user of this beautiful OS and was wondering if it is possible to hide the &lt;strong&gt;Recent&lt;/strong&gt; bookmark, I've been searching on Google but could only find how to disable it which I already knew. Any advice? Many thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MwH6f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MwH6f.png&quot; alt=&quot;recent bookmark&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9932" LastActivityDate="2017-08-28T10:55:21.480" Title="Hide &quot;Recent&quot; bookmark" Tags="|pantheon-files|pantheon|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12182" PostTypeId="2" ParentId="12178" CreationDate="2017-05-29T04:11:03.387" Score="1" Body="&lt;p&gt;it's up... at least here&#xA;although have no idea why it's in Turkish &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-29T04:11:03.387" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12183" PostTypeId="2" ParentId="12180" CreationDate="2017-05-29T06:29:03.280" Score="0" Body="&lt;p&gt;This is the screenshot from my network settings. Are you saying that you don't have the section of wireless and Ethernet&lt;a href=&quot;https://i.stack.imgur.com/NxzLG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NxzLG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;?&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-05-29T06:29:03.280" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12184" PostTypeId="2" ParentId="12071" CreationDate="2017-05-29T08:12:31.803" Score="0" Body="&lt;p&gt;From what I can see, you are trying to paste onto an ISO image or a bootable USB drive formatted for system installation. Can you try using another USB drive and see if you can paste files on it?&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-05-29T08:12:31.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12186" PostTypeId="1" CreationDate="2017-05-29T10:26:08.513" Score="1" ViewCount="210" Body="&lt;p&gt;Is there any way of enabling a modifier key to enable Hot Corners?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some times I accidentally move my mouse to a corner, like when I want to exit full screen of a video, or close a window etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be a great feature if I could hold in ALT and only then hot corner behavior will trigger.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't found a way of doing this natively, but maybe someone has a script or workaround to enable this?&lt;/p&gt;&#xA;" OwnerUserId="9938" LastActivityDate="2019-04-20T00:02:16.347" Title="Hot Corners modifier key" Tags="|release-loki|keyboard-shortcuts|desktop|hot-corners|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12187" PostTypeId="2" ParentId="12186" CreationDate="2017-05-29T12:12:06.567" Score="1" Body="&lt;p&gt;I don't think there is a possibility to trigger selectively. However as a workaround, you could use a custom command that would start by checking if the alt key is held down and trigger the action if and only if…&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-05-29T12:12:06.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12188" PostTypeId="1" CreationDate="2017-05-29T15:08:16.200" Score="1" ViewCount="1130" Body="&lt;p&gt;I installed Elementary OS 0.4 about 2-3 months ago. Currently I am dual-booting it with Ubuntu 16.10, Lubuntu 16.04, and Deepin 15.4. My wifi (I haven't checked ethernet) does not work on any of them! I can connect to a network but after loading a web page, it says something along the lines of, &quot;No Internet Connection).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So Elementary OS was the only system where the wifi worked for a long time. Now, however, ever since the update from 0.4 to 0.4.1 it's not working on eOS either!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Elementary OS is my main OS I would like to have it fixed first. By the way, running &lt;code&gt;lshw -c network&lt;/code&gt; returns this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    *-network DISABLED      &#xA;       description: Wireless interface&#xA;       product: BCM4321 802.11a/b/g/n&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wls4&#xA;       version: 03&#xA;       serial: 00:21:e9:de:6b:0e&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) latency=0 multicast=yes wireless=IEEE 802.11abg&#xA;       resources: irq:16 memory:90500000-90503fff memory:90000000-900fffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: 88E8058 PCI-E Gigabit Ethernet Controller&#xA;       vendor: Marvell Technology Group Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: ens5&#xA;       version: 13&#xA;       serial: 00:22:41:2d:43:14&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair&#xA;       resources: irq:27 memory:90400000-90403fff ioport:5000(size=256) memory:90420000-9043ffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       physical id: 2&#xA;       logical name: enp0s26f7u2&#xA;       serial: a6:63:9d:eb:e5:2d&#xA;       capabilities: ethernet physical&#xA;       configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.214 link=yes multicast=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The wifi is disable right now because I'm connected via tethering.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I am using my Android tablet for tethering in order to connect to the Internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="8528" LastEditorUserId="8528" LastEditDate="2017-06-01T23:27:58.097" LastActivityDate="2018-12-22T18:01:20.380" Title="Wifi Not Working Elementary Os Loki 0.4.1" Tags="|release-loki|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12190" PostTypeId="1" CreationDate="2017-05-29T15:30:50.050" Score="2" ViewCount="248" Body="&lt;p&gt;I am running Elementary 0.4.1 inside Virtualbox. Updates available show both virtualbox-guest-dkms and virtualbox-guest-x11&#xA;What is the difference? Which one(s) should I install/update?&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Thanks!&lt;/h2&gt;&#xA;" OwnerUserId="9940" LastActivityDate="2017-05-29T15:30:50.050" Title="Updates available show both virtualbox-guest-dkms and virtualbox-guest-x11" Tags="|virtualbox|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12193" PostTypeId="2" ParentId="12158" CreationDate="2017-05-29T16:15:45.050" Score="0" Body="&lt;p&gt;Never mind... Just did it the hard way...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Backed up home and reinstalled eOS... Oddly enough, this took less time than everything else I tried...&lt;/p&gt;&#xA;" OwnerUserId="9538" LastActivityDate="2017-05-29T16:15:45.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12194" PostTypeId="1" AcceptedAnswerId="12196" CreationDate="2017-05-29T16:20:50.610" Score="0" ViewCount="78" Body="&lt;p&gt;I am running redshift, but it crashes everytime i logout, or suspend.&#xA;I have to run a single command everytime i login. I have tried adding it to .bashrc but it only works when a terminal is opened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="9943" LastActivityDate="2017-05-30T10:54:36.177" Title="I want to run a command everytime I login?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12195" PostTypeId="1" CreationDate="2017-05-29T16:32:18.497" Score="1" ViewCount="6507" Body="&lt;p&gt;It doesn't detect the ability of my laptop to connect to wifi at all. About ethernet it can connect to the internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use a hp15 laptop in dualboot with windows 8.1, which always could connect to wifi. My wifi-adapter is a broadcom BCM43142 802.11 bgn wifi-adapter. I use the newest release, loki 0.4.1. When I use a command to check all the network devices, it just shows me my bluetooth adapter, not my wifi-adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can somebody help me, please?&lt;/p&gt;&#xA;" OwnerUserId="9925" LastEditorUserId="308" LastEditDate="2018-08-07T17:15:04.067" LastActivityDate="2019-01-31T07:53:40.837" Title="My elementary OS can't detect my wifi at all, just connect about ethernet. What to do?" Tags="|release-loki|wifi|internet|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="12196" PostTypeId="2" ParentId="12194" CreationDate="2017-05-29T18:49:45.547" Score="1" Body="&lt;p&gt;Do yourself a favor and install &lt;code&gt;redshift-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the UI you will find an option to run it automatically (it uses autostart). On my machine it works almost flawlessly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After turning that Autostart slider on, it will create a file &lt;code&gt;~/.config/autostart/redshift-gtk.desktop&lt;/code&gt;. You can edit the line that starts with &lt;code&gt;exec&lt;/code&gt; to configure various options. For example, for me I have edited that line this way:&#xA;&lt;code&gt;Exec=redshift-gtk -t 6500:5600&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it will automatically change color temperature to 5600 during night time.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="8598" LastEditDate="2017-05-30T10:54:36.177" LastActivityDate="2017-05-30T10:54:36.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12197" PostTypeId="1" CreationDate="2017-05-29T18:58:26.880" Score="0" ViewCount="114" Body="&lt;p&gt;I have a new keyboard without media control, so I want use xbinkeys to ad a combination to play/pause, go to next and back song. How can I do this by commandl ine (change music).&lt;/p&gt;&#xA;" OwnerUserId="9946" LastActivityDate="2017-05-29T19:25:16.763" Title="How do I change music via command line" Tags="|release-loki|audio|" AnswerCount="1" CommentCount="0" ClosedDate="2017-05-30T19:44:09.740" ContentLicense="CC BY-SA 3.0" />
  <row Id="12198" PostTypeId="2" ParentId="12195" CreationDate="2017-05-29T19:07:23.717" Score="2" Body="&lt;p&gt;If you have a working Internet connection via Ethernet, run this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the problem persists, research &lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&quot;&gt;this page&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-29T19:07:23.717" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12199" PostTypeId="2" ParentId="9255" CreationDate="2017-05-29T19:17:21.240" Score="0" Body="&lt;p&gt;I accomplished this slightly differently.  I found the &lt;a href=&quot;http://www.openprinting.org/driver/epson-escpr&quot; rel=&quot;nofollow noreferrer&quot;&gt;epson-escpr driver&lt;/a&gt; on open-printing.org.  I installed the DEB &lt;a href=&quot;http://download.ebz.epson.net/dsc/op/stable/debian/dists/lsb3.2/main/binary-amd64/epson-inkjet-printer-escpr_1.4.1-1lsb3.2_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;distribution&lt;/a&gt; - amd x86 64 bit.  at the command line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install ./epson-inkjet-printer-escpr_1.4.1-1lsb3.2_amd64.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, I went to appcenter &gt; printers &gt; Clicked Open (it was greyed out, but it did open) &gt; Found my Epson xp-820 listed (USB).  I walked through the menus to find my printer and install it.  It immediately recognized it as an XP-820 and added the printer to my printer list in the &quot;printers&quot; app UI.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that before I installed the amd driver from open drivers, the &quot;printers&quot; app made me select a driver and installed it wrong.  Print test page didn't print correctly.&lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="9738" LastEditDate="2017-05-29T19:41:14.587" LastActivityDate="2017-05-29T19:41:14.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12200" PostTypeId="2" ParentId="12197" CreationDate="2017-05-29T19:25:16.763" Score="0" Body="&lt;p&gt;You already have this built-in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Settings-&gt;Keyboard, open Shortcuts tab, then click on Media on the left side menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There you assign all related shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-29T19:25:16.763" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12201" PostTypeId="2" ParentId="12174" CreationDate="2017-05-29T19:51:07.133" Score="0" Body="&lt;p&gt;You can try Synapse&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:synapse-core/ppa&#xA;sudo apt update&#xA;sudo apt install synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=rg2YBhl7Zhg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installation &amp;amp; demo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if you want, you can remove slingshot entirely:&#xA;&lt;code&gt;sudo apt remove slingshot-launcher&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-29T19:51:07.133" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12202" PostTypeId="2" ParentId="1441" CreationDate="2017-05-29T21:05:33.660" Score="1" Body="&lt;p&gt;I found a partial solution to your first request. Like me, you wanted a method or a keyboard shortcut to switch:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;between windows of the same application on the same workspace&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you're using a trackpad - hover over the application icon in your Dock, then swipe up or down with 2 fingers. It'll cycle the windows of that application. &#xA;If you're using a mouse, hover over the icon and use the scroll wheel to cycle through windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, this applies for all windows in all work spaces, but for me this is somewhat workable until a keyboard shortcut is found/created...&lt;/p&gt;&#xA;" OwnerUserId="8480" LastActivityDate="2017-05-29T21:05:33.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12203" PostTypeId="2" ParentId="12087" CreationDate="2017-05-29T21:06:18.637" Score="2" Body="&lt;p&gt;I have Nvidia GTX 765m, had screen tearing fixed. 2 things to do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) In Firefox open new tab, go to &lt;code&gt;about:config&lt;/code&gt; and set &lt;code&gt;gfx.xrender.enabled&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Create a new folder &lt;code&gt;/etc/X11/xorg.conf.d&lt;/code&gt; and inside there create a file &lt;code&gt;20-intel.conf&lt;/code&gt; which contents are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;   Identifier  &quot;Intel Graphics&quot;&#xA;   Driver      &quot;intel&quot;&#xA;   Option &quot;AccelMethod&quot; &quot;sna&quot;&#xA;   Option &quot;TearFree&quot; &quot;true&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That's it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Nvidia Prime settings be sure you are using Intel Graphics as the default. After all these changes you &lt;em&gt;may&lt;/em&gt; need to reboot.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-05-29T21:06:18.637" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12207" PostTypeId="1" AcceptedAnswerId="12214" CreationDate="2017-05-30T08:34:32.090" Score="0" ViewCount="197" Body="&lt;p&gt;I'm a new user in Elementary OS (0.4.1 Loki) and I find it really amazing.&#xA;But I have a problem that I cannot resolve.&#xA;I installed xampp for linux and all works fine but I wanted to put it in the plank with the others applications. Anyway, I find some tutorial and all say that I have to create the directory:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;/usr/share/applications/lampp.desktop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and put inside it &lt;a href=&quot;https://i.stack.imgur.com/UiEgV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UiEgV.png&quot; alt=&quot;lampp.desktop&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now I have the icon but when I click on it nothing appear. Seems like it's loading for a bit but nothing happen after that shot time.&lt;/p&gt;&#xA;&lt;p&gt;I also try to replace:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Exec=gksu ./opt ...&lt;/p&gt;&#xA;&lt;p&gt;Exec=gksudo ./opt ...&lt;/p&gt;&#xA;&lt;p&gt;Exec=./ ... (in this case no icon appear)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;How can I solve it?&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;I'm sorry if I say something wrong but I'm also new in Linux and still learning the basics.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="9956" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-05-30T16:10:38.837" Title="Custom application won't start" Tags="|applications|slingshot|app-shortcuts|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12208" PostTypeId="2" ParentId="12181" CreationDate="2017-05-30T09:34:38.003" Score="1" Body="&lt;p&gt;There is no way of doing this, as far as I can tell, without disabling &quot;recent&quot; globally (so that GLib.VFS.get_default.get_supported_uri_schemes () does not include &quot;recent&quot;).  You could raise a wishlist issue requesting this ability be added to Files.  You would need to make a clear argument as to why it should be done and get some support from other users to increase the likelihood it would be implemented.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-05-30T09:34:38.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12210" PostTypeId="2" ParentId="12207" CreationDate="2017-05-30T13:31:44.657" Score="0" Body="&lt;p&gt;you can try to add the menu using menulibre&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;add costum menu there, and drag the menu from slingshot to plank&lt;/p&gt;&#xA;" OwnerUserId="9959" LastActivityDate="2017-05-30T13:31:44.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12212" PostTypeId="1" CreationDate="2017-05-30T15:42:29.097" Score="0" ViewCount="2463" Body="&lt;p&gt;My vertical wheel does nothing in cases where I expect it to scroll, like in a web browser.  It might have something to do with the fact I ran this command to disable my middle click:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xmodmap -e &quot;pointer = 1 25 3 4 5 6 7 8 9&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I only want to disable middle click when I use the touchpad.  So I re-enabled middle click:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xmodmap -e &quot;pointer = 1 2 3 4 5 6 7 8 9&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even so, vertical scroll is not working.  It should just &lt;a href=&quot;https://wiki.archlinux.org/index.php/Logitech_MX_Master&quot; rel=&quot;nofollow noreferrer&quot;&gt;work&lt;/a&gt;.  This mouse works fine on Mac.&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-09-28T02:26:52.317" Title="Vertical scroll wheel not working on logitech mx master" Tags="|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12213" PostTypeId="2" ParentId="12212" CreationDate="2017-05-30T15:42:41.623" Score="1" Body="&lt;p&gt;Restarting the laptop fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-05-30T15:42:41.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12214" PostTypeId="2" ParentId="12207" CreationDate="2017-05-30T15:44:38.917" Score="0" Body="&lt;p&gt;I believe you also need to specify a Path in the .desktop file. Use this image as an example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/b42rQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b42rQ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to run it as root, add &lt;code&gt;gksu&lt;/code&gt; before the command:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Exec=gksu /opt/lampp/manager-linux-x64.sh&lt;br&gt;&#xA;Path=/opt/lampp&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-05-30T15:52:59.120" LastActivityDate="2017-05-30T15:52:59.120" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12216" PostTypeId="2" ParentId="12207" CreationDate="2017-05-30T16:10:38.837" Score="0" Body="&lt;p&gt;I would check your exec path. You have ./opt, you should not have a . in front of your root. Could be why nothing is executing, linux can't find it.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-30T16:10:38.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12217" PostTypeId="2" ParentId="11443" CreationDate="2017-05-30T18:38:36.640" Score="0" Body="&lt;p&gt;The workaround for me (in Fedora) is restarting the Shell using Alt+F2 for the run command and typing in 'r'. This only works if you're running Gnome Shell in Xorg mode though.&lt;/p&gt;&#xA;" OwnerUserId="9965" LastActivityDate="2017-05-30T18:38:36.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12223" PostTypeId="1" CreationDate="2017-05-31T04:09:10.293" Score="1" ViewCount="133" Body="&lt;p&gt;I am installing a new hard drive in my HP computer and would like to do a clean install of elementary OS—and not have Windows on there anymore. How can I make a DVD of elementary OS now, while my computer is still operational, and then install it on the new hard drive? I am a basic user.&lt;/p&gt;&#xA;" OwnerUserId="9972" LastEditorUserId="308" LastEditDate="2019-12-19T20:04:07.473" LastActivityDate="2019-12-19T20:04:07.473" Title="How can I prepare to install elementary OS before installing a new hard drive?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12224" PostTypeId="2" ParentId="12223" CreationDate="2017-05-31T04:45:56.477" Score="1" Body="&lt;p&gt;Go to elementary.io and download the Image file(.iso). Once it is downloaded just right click on the .iso file and windows should give you the option to burn it to dvd. You can then boot from that dvd to test out and or install elementary OS. It comes up with a very easy to follow prompt to install the OS. You may need to look elsewhere to find out how to boot the DVD though, that depends on the maker of your computer, and if it has bios or UEFI.&lt;/p&gt;&#xA;" OwnerUserId="9973" LastActivityDate="2017-05-31T04:45:56.477" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12225" PostTypeId="2" ParentId="9035" CreationDate="2017-05-31T06:57:08.497" Score="1" Body="&lt;p&gt;My wired connection was constantly reconnecting.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Network:   Card-1: Intel Ethernet Connection (2) I219-V driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6&#xA;           IF: enp0s31f6 state: up speed: 100 Mbps duplex: full mac: &amp;lt;filter&amp;gt;&#xA;           Card-2: Broadcom BCM4360 802.11ac Wireless Network Adapter driver: wl bus-ID: 07:00.0&#xA;           IF: wlp7s0 state: down mac: &amp;lt;filter&amp;gt;&#xA;           Card-3: Intel I211 Gigabit Network Connection driver: igb v: 5.3.0-k port: c000 bus-ID: 0b:00.0&#xA;           IF: enp11s0 state: down mac: &amp;lt;filter&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I had to turn off energy efficient ethernet (eee) and wake on lan (wol d) on my wired interfaces with the follwoing command, to make it consistent (you may need to install ethtool first):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ethtool --set-eee enp0s31f6 eee off  &#xA;ethtool -s enp0s31f6 wol d  &#xA;ethtool --set-eee enp11s0 eee off  &#xA;ethtool -s enp11s0 wol d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To make those changes persistent, yo need to add those commands to /etc/rc.local&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-05-31T06:57:08.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12226" PostTypeId="1" CreationDate="2017-05-31T06:59:25.947" Score="0" ViewCount="692" Body="&lt;p&gt;DraftSight is an AutoCAD look-alike that has worked well for me in both Windows and MAC OS.  I am trying to switch over to Linux and tried to install it on my Loki 0.4 machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found some advice on this page:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/466522/how-to-install-draftsight-on-ubuntu-64bits&quot;&gt;https://askubuntu.com/questions/466522/how-to-install-draftsight-on-ubuntu-64bits&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran this command in Terminal:&#xA;sudo apt-get install libuuid1:i386 libice6:i386 libsm6:i386 libxt6:i386 libaudio2:i386 libgtk2.0-0:i386 libcanberra-gtk-module:i386 libcanberra-gtk0:i386 libglu1-mesa:i386&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Draftsight started but after the usual registration window it flashed a white window and then disappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't recall where I found the suggestion to run this command:&#xA;cd /opt/dassault-systemes/DraftSight/Linux/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then this:&#xA;./DraftSight&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then got this error message:&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(DraftSight:2826): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(DraftSight:2826): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(DraftSight:2826): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(DraftSight:2826): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;Could not parse stylesheet of object 0x2ee0df0&#xA;Could not parse stylesheet of object 0x2ee0df0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A link on this page: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1368/gtk2-apps-not-working-in-elementary&quot;&gt;gtk2 apps not working in elementary&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sent me here: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1472836&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1472836&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the bug does not seem to be fixed, at least as far as DraftSight is concerned.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just recently ran updates and upgrades for my Elementary OS and I downloaded the current version of DraftSight.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me what I am missing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="8523" LastActivityDate="2017-11-09T15:52:22.530" Title="Problems Installing DraftSight in Elementary OS Loki 0.4" Tags="|release-loki|software-installation|pantheon|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12229" PostTypeId="1" CreationDate="2017-05-31T11:43:13.270" Score="0" ViewCount="1708" Body="&lt;p&gt;i am using Asus E403SA laptop and graphics performance in Elementary OS Loki 0.4.1 is not as good as in Windows 10 Pro. As I am a new Loki user, can you guide me through the process of updating/fixing this driver. I use  Integrated Intel HD Graphics 400 (Braswell).&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="9979" LastActivityDate="2017-09-01T22:59:57.933" Title="Intel Integrated Graphics Performance" Tags="|release-loki|graphics|intel|performance|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12230" PostTypeId="2" ParentId="12130" CreationDate="2017-05-31T12:03:52.030" Score="7" Body="&lt;p&gt;To solve the problem &quot;public key is not available: NO_PUBKEY A74F73EFFE70B91C&quot;, import the key:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -q &quot;http://packages.elementary.io/key.asc&quot; -O- | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9980" LastEditorUserId="84" LastEditDate="2018-05-04T12:25:26.837" LastActivityDate="2018-05-04T12:25:26.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12231" PostTypeId="1" AcceptedAnswerId="12252" CreationDate="2017-05-31T13:03:01.443" Score="1" ViewCount="2087" Body="&lt;p&gt;I'm new to Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Initially I had Ubuntu 14.04 LTS along with Windows 10. I wanted to remove Ubuntu and install Elementary OS. So, my friend ran &lt;code&gt;sudo rm -rf / --no-preserve-root&lt;/code&gt; and then it started removing a lot of things. Suddenly it stopped showing progress (or that is what I felt), so I turned off the computer. When I tried booting it, it started checking for hardware malfunctions and it said &quot;No hardware malfunctions, OS image might have been corrupted or USB boot is not setup in BIOS.&quot;(not exactly sure of the error message, it was somewhat like this). So, I tried to go the BIOS setup menu. Here, I restored the setting hoping this would allow me to boot to Windows. This attempt was unsuccessful. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried installing Elementary OS using a bootable USB. I was able to install on the partition containing Ubuntu by formatting it. After successful installation I rebooted and was directly led to Elementary (without any grub page). On mounting Windows partition I found all my files were intact (as far as my knowledge goes). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I noticed that line 7 in &lt;code&gt;/etc/default/grub&lt;/code&gt; was &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt; rather than &lt;code&gt;#GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt; (the one in my friends file). After commenting this line, updating grub and rebooting, the grub menus was back although there was no option to boot to Windows. The link to the image of this menus is has been posted as a comment below (since I can't post more than two links in the question due to lack of reputation)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, we checked the &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;. Here, there was a difference in line 270 onwards when compared to my friends file. These are shown below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XSkVl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XSkVl.png&quot; alt=&quot;My file&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/D3xdG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D3xdG.png&quot; alt=&quot;My friends file&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, as you can see, some lines are missing in my case. Also, line 254 in my friend's file has different numbers when compared to the corresponding line in my file, I decided not to copy the missing lines or change the file (as it also said in the beginning not to edit the file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On googling, all the situations had the problem of not being able to boot into Linux rather than the other way round. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I'm posting this question here: Can you suggest any way to add the Windows boot loader option in the grub menus?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance. &lt;/p&gt;&#xA;" OwnerUserId="9978" LastActivityDate="2017-06-19T01:21:33.950" Title="Unable to boot into Windows" Tags="|dual-boot|grub|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12232" PostTypeId="2" ParentId="12229" CreationDate="2017-05-31T13:17:56.883" Score="-1" Body="&lt;p&gt;I use Intel HD 5500 and elementary is soooo smoth even with high cpu usage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;since you use new CPU you might try new kernel 4.11.&lt;/p&gt;&#xA;" OwnerUserId="9959" LastActivityDate="2017-05-31T13:17:56.883" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12233" PostTypeId="1" AcceptedAnswerId="12234" CreationDate="2017-05-31T17:04:41.037" Score="1" ViewCount="161" Body="&lt;p&gt;I have elementary OS 0.4.1 Loki and Google Chrome Version 58.0.3029.110 (64-bit).&#xA;Every time i start my computer, i open Chrome with my tabs from last session. Every time i press anything (links, buttons etc.) for the first time that session, in any of the tabs, Chrome opens a new tab with ad-content. What's this? Virus?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And how do i run AV on elementary?&lt;/p&gt;&#xA;" OwnerDisplayName="user9985" LastActivityDate="2017-05-31T17:06:47.697" Title="Elemantary OS + Google Chrome: Chrome is opening new tabs with ad-content" Tags="|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12234" PostTypeId="2" ParentId="12233" CreationDate="2017-05-31T17:06:47.697" Score="2" Body="&lt;p&gt;I suggest checking what extensions you have running in Chrome. It's likely not a virus or malware. Sounds like Chrome picked up a bad extension that is throwing ads at you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you want to install and run antivirus &lt;a href=&quot;http://www.makeuseof.com/tag/free-linux-antivirus-programs/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; are some you can try.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-05-31T17:06:47.697" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12236" PostTypeId="2" ParentId="2443" CreationDate="2017-05-31T17:43:25.733" Score="1" Body="&lt;p&gt;I got the same problem, in my case all the trouble was caused because &lt;strong&gt;my hard drive was full&lt;/strong&gt;(i was using a Virtual Machine). I delete some unnecessary files (ALT + CTRL + F1 for using console)  and i could login again. After that i just upgrade the VM disk and now is work perfectly. &lt;/p&gt;&#xA;" OwnerUserId="9987" LastActivityDate="2017-05-31T17:43:25.733" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12237" PostTypeId="1" AcceptedAnswerId="12240" CreationDate="2017-06-01T04:59:04.753" Score="3" ViewCount="307" Body="&lt;p&gt;I upgraded the App Center to 0.2.3, but then the site,  &lt;a href=&quot;http://packages.elementary.io/appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter&lt;/a&gt;, the packages are hosted on is reporting a bad gateway. The App Center isn't showing anything other than the default apps that come with my fresh install of Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When running sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade I get the error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reading package lists... Done&#xA;...&#xA;E: Failed to fetch &lt;a href=&quot;http://packages.elementary.io/appcenter/dists/xenial/main/binary-amd64/Packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter/dists/xenial/main/binary-amd64/Packages&lt;/a&gt;  521  Origin Down [IP: 104.28.5.44 80]&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&lt;/p&gt;&#xA;" OwnerUserId="9991" LastEditorUserId="9991" LastEditDate="2017-06-01T05:18:09.707" LastActivityDate="2017-06-01T07:23:43.713" Title="App Center package website down" Tags="|appcenter|apt|repositories|" AnswerCount="1" CommentCount="0" ClosedDate="2017-06-02T00:31:27.743" ContentLicense="CC BY-SA 3.0" />
  <row Id="12238" PostTypeId="1" AcceptedAnswerId="12263" CreationDate="2017-06-01T05:36:50.970" Score="0" ViewCount="69" Body="&lt;p&gt;when i click &lt;code&gt;Always on top&lt;/code&gt; ,&lt;code&gt;Always on visible&lt;/code&gt; take effect,and vice versa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yExw8.jpg&quot; alt=&quot;chrome simple window&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="9992" LastActivityDate="2017-06-03T11:20:16.173" Title="Right - click menu events for simple chrome popup window is wrong" Tags="|system|desktop|" AnswerCount="1" CommentCount="6" ClosedDate="2019-04-19T21:12:32.277" ContentLicense="CC BY-SA 3.0" />
  <row Id="12239" PostTypeId="2" ParentId="12133" CreationDate="2017-06-01T07:20:03.893" Score="1" Body="&lt;p&gt;Error 521 on the Host (&lt;a href=&quot;https://packages.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.elementary.io&lt;/a&gt;)! Just wait, the error will be fixed soon&lt;/p&gt;&#xA;" OwnerUserId="6792" LastActivityDate="2017-06-01T07:20:03.893" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12240" PostTypeId="2" ParentId="12237" CreationDate="2017-06-01T07:23:43.713" Score="1" Body="&lt;p&gt;Just wait, the error will be fixed soon&lt;/p&gt;&#xA;" OwnerUserId="6792" LastActivityDate="2017-06-01T07:23:43.713" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12241" PostTypeId="2" ParentId="9351" CreationDate="2017-06-01T07:52:47.927" Score="2" Body="&lt;p&gt;To enable bluetooth on every startup you need to add your custom command in etc/rc.local&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/rc.local&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now add the following line before exit 0&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill unblock bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will start bluetooth on every startup.&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2017-06-01T07:52:47.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12242" PostTypeId="1" CreationDate="2017-06-01T09:19:11.213" Score="0" ViewCount="414" Body="&lt;p&gt;I don't understand how come I don't see anyone else complaining about this problem, is it only on my computer somehow, or is it a known removed feature? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; to paste in Pantheon Files does not work to paste (neither a file nor a directory). I can tell that &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;C&lt;/kbd&gt; for copying does work, because copying it with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;C&lt;/kbd&gt;, and then right-clicking to choose &lt;code&gt;Paste&lt;/code&gt; does work. But hitting &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; does nothing. Regardless of the method used to copy. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; to paste into a file name when renaming (in Pantheon Files) works fine &lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; to paste into the path location (in Pantheon Files) works fine&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; to paste in terminal works fine&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; to paste works fine in all other programs (that I've tried so far). &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;How come, and are there any known suggestions to fix this? &lt;/p&gt;&#xA;" OwnerUserId="9995" LastEditorUserId="686" LastEditDate="2017-06-02T17:40:07.747" LastActivityDate="2018-12-27T18:03:45.783" Title="Ctrl+V doesn't work in Pantheon Files" Tags="|pantheon-files|pantheon|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12244" PostTypeId="2" ParentId="12242" CreationDate="2017-06-01T15:42:43.970" Score="1" Body="&lt;p&gt;Your problem is probably just a bug in an old version&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try&#xA;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the problem still persists, try &lt;code&gt;sudo apt install --reinstall pantheon-files&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(It probably won't)&lt;/p&gt;&#xA;" OwnerUserId="9958" LastActivityDate="2017-06-01T15:42:43.970" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12245" PostTypeId="1" AcceptedAnswerId="12327" CreationDate="2017-06-01T17:50:43.737" Score="0" ViewCount="39" Body="&lt;p&gt;Sup people!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since a few weeks now, I noticed that, every time I log into my eOS machine via ssh, my private directory (~) is unmounted. Meaning there is nothing but two files, namely &lt;code&gt;Access-Your-Private-Data.desktop&lt;/code&gt; and &lt;code&gt;README.txt&lt;/code&gt;, in my home.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To access my files like normal, I have to follow the instructions given in the readme, which is basically just executing &lt;code&gt;ecryptfs-mount-private&lt;/code&gt;. Funny thing though, when prompted to enter my &quot;login keyphrase,&quot; I have to enter the password I had originally set for my account when I first installed eOS. When trying it with my current password, I just get asked to retry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why could that be? I honestly have no idea! Apart from installing some GUI apps and auto-mounting my Synology's network share on boot, I didn't mess with the system in any way. &lt;a href=&quot;https://wiki.ubuntu.com/MountWindowsSharesPermanently&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; is the tutorial I followed for mounting the network drive. &lt;/p&gt;&#xA;" OwnerUserId="10002" LastActivityDate="2017-06-08T18:43:54.473" Title="Private directory gets unmounted on every login" Tags="|release-loki|boot|system|sharing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12247" PostTypeId="1" CreationDate="2017-06-01T18:37:40.597" Score="0" ViewCount="1301" Body="&lt;p&gt;I'm trying to use IntelliJ Idea for some Kotlin development, and coming from Mac, I wanted to use the Mac key bindings. They rely fairly heavily on the Super key as an alternative to the Command key on Mac, and I find that IntelliJ is entirely unable to pick up &lt;code&gt;Super+anything&lt;/code&gt; keybindings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is to say, if I wanted to, say, undo something, the &quot;Macish&quot;  keybinding is set to &lt;code&gt;Super+z&lt;/code&gt;, and if I actually press that combination, it just prints a &lt;code&gt;z&lt;/code&gt; to the screen. Similarly, if I want to quit a tab, I try &lt;code&gt;Super+w&lt;/code&gt; and it just prints a &lt;code&gt;w&lt;/code&gt; to the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried disabling virtually all the keyboard keybindings in the Elementary OS Keyboard Settings menu that use the Super key. It still seems that the modifier is not reaching the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how I might be able to fix this behavior? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="10004" LastActivityDate="2024-04-02T09:02:05.227" Title="Keybindings, specifically using the Super key in IntelliJ Idea" Tags="|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12250" PostTypeId="2" ParentId="4448" CreationDate="2017-06-02T00:58:29.903" Score="1" Body="&lt;p&gt;I have a trackpad with a large middle click zone.  Accidentally closing windows is the &lt;strong&gt;worst&lt;/strong&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I disabled middle click in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xmodmap -e &quot;pointer = 1 99 3 4 5 6 7 8 9&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This takes effect immediately.  Then if I start using a mouse, where again I want middle click to work, I run the reverse command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xmodmap -e &quot;pointer = 1 2 3 4 5 6 7 8 9&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can put &lt;code&gt;pointer = 1 2 3 4 5 6 7 8 9&lt;/code&gt; into the file &lt;code&gt;~/.Xmodmap&lt;/code&gt; to setup a persistent default that will take effect when you login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd LOVE to find a better fix.&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2017-06-02T00:58:29.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12251" PostTypeId="1" CreationDate="2017-06-02T01:26:02.933" Score="1" ViewCount="332" Body="&lt;p&gt;Sometimes when I plug in an external monitor via HDMI, my OS freezes up.  Sometimes it happens immediately, other times it happens later.  This happens about 60% of the time.  I'm running a 2017 Dell XPS 15&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not even sure where to start troubleshooting this problem.  Are there some crash logs or something?&lt;/p&gt;&#xA;" OwnerUserId="9738" LastActivityDate="2019-05-03T19:59:58.653" Title="External monitor freezes OS" Tags="|display|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12252" PostTypeId="2" ParentId="12231" CreationDate="2017-06-02T06:21:39.983" Score="1" Body="&lt;p&gt;There's no way to repair the windows boot loader from linux and trying to code that is useless because the disk ID is something that is unique, believe me I tried hard.&lt;/p&gt;&#xA;&lt;p&gt;You must do a windows pendrive to fix the bootloader(do it from another windows machine because linux doesn't handle fat32 too well), because you deleted ubuntu's grub, the disk ID for the windows partition lost, and then you overwrited that, putting elementary on it, so that's why linux can't detect your untouched windows partition.&lt;/p&gt;&#xA;&lt;p&gt;What you can do is download the &lt;a href=&quot;https://www.microsoft.com/en-us/software-download/windows10&quot; rel=&quot;nofollow noreferrer&quot;&gt;Windows 10 ISO&lt;/a&gt; and use the &amp;quot;repair option&amp;quot; that is in the first screen after booting up the usb key as you can see here :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TVV3v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TVV3v.png&quot; alt=&quot;windows 10 first screen&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When entering the repair option, go to Troubleshoot -&amp;gt; Advanced options -&amp;gt; Command prompt and type this in the console to fix the bootloader.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bootrec /fixboot&#xA;bootrec /fixmbr&#xA;bootrec /rebuildbcd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with that done, you will be able to boot windows, but you deleted the grub menu so for fixing that launch the elementary os as live image and open a terminal &lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; and write this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;lsblk&#xA;sudo grub-install /dev/sda&#xA;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;the &lt;code&gt;lsblk&lt;/code&gt; command is used for seeing the disk partitions, you must see the name of your disk, I'm assuming that your disk is called 'sda'&#xA;with that done you will fix all your problems, good luck and google more&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-06-19T01:21:33.950" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12253" PostTypeId="2" ParentId="7300" CreationDate="2017-06-02T06:51:10.013" Score="1" Body="&lt;p&gt;I think your keys are working but they aren't detected by the kernel driver, because I have the same problem, for fix that I added the parameter in &lt;code&gt;/etc/default/grub&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;inline &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&lt;/code&gt;&#xA;add &lt;code&gt;acpi_backlight=video&lt;/code&gt;&#xA;so now it says &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash acpi_backlight=video&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then update the grub with &lt;code&gt;sudo update-grub&lt;/code&gt; and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this will fix your problem, that &lt;code&gt;xbacklight&lt;/code&gt; or &lt;code&gt;xrandr&lt;/code&gt; are legacy don't use that, let the kernel handle that.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="8272" LastEditDate="2017-06-02T21:59:00.980" LastActivityDate="2017-06-02T21:59:00.980" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12255" PostTypeId="1" CreationDate="2017-06-02T07:57:45.737" Score="0" ViewCount="1464" Body="&lt;p&gt;I want the dock to be at the bottom, and hidden. I like the behavior I have on my home mac (I'm using eOS on my work computer) that shows the dock as soon as the pointer hovers it for some time, or if I hit the bottom &quot;hard&quot; (fast cursor movement toward the bottom edge).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have hence selected auto-hide but none of the behaviors match what I want. First, they make little sense to me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;intellihide&lt;/strong&gt;: apparently similar to autohide but should be smarter (like don't hide if the desktop is apparent?)&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;autohide&lt;/strong&gt;: apparently similar to intellihide but dumber&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;dodge maximized window&lt;/strong&gt;: should hide only if the window is maximized?&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;window dodge&lt;/strong&gt;: should hide only if a window is covering it?&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;dodge active window&lt;/strong&gt;: should hide only if the active window is covering it?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now, maybe I got them wrong, but I've tried them all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is that once hidden, the dock is a nightmare to reveal. I have to shake my mouse pointer, light a candle and pray for it to show up. I mean none of the expected behaviors trigger a reveal:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sending the cursor on the bottom edge with a large velocity&lt;/li&gt;&#xA;&lt;li&gt;hovering the mouse for 250-500ms on the edge&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But now, I actually don't know what triggers the dock to show up.&lt;br&gt;&#xA;I can do the following and nothing will trigger: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;move the cursor slowly to the edge and hold the cursor still&lt;/li&gt;&#xA;&lt;li&gt;move the cursor fast to the edge and shake it&lt;/li&gt;&#xA;&lt;li&gt;hit the bottom edge hard&lt;/li&gt;&#xA;&lt;li&gt;???&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(and admittedly, after writing this question and trying every scenario, the best success rate I have is when moving the cursor really slowly to the edge. but that's not a productive behavior)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did try to change the pressure reveal option, as I understand should avoid unwanted dock reveals; however even with this option disabled the dock is too hard to reveal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: when I select autohide and disable pressure reveal, the behavior is nice as long as the settings are open (or for a short period of time). But quickly after that I have a hard time revealing the dock.&lt;/p&gt;&#xA;" OwnerUserId="9692" LastActivityDate="2019-01-04T16:01:15.250" Title="Plank is too hard to trigger" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12256" PostTypeId="1" AcceptedAnswerId="12898" CreationDate="2017-06-02T14:12:27.857" Score="0" ViewCount="289" Body="&lt;p&gt;&lt;strong&gt;Specs:&lt;/strong&gt;&#xA;(Asus Laptop)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor: Intel i5-6200U&#xA;Graphics: HD520 (Active), GT930M&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Touchpad: Elan Touchpad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS: elementary OS 0.4.1 64-bit (Ubuntu 16.04.2 LTS)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kernel: 4.8.0-53-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The touchpad does not work when the laptop boots up. It did not work during the (fresh) installation I did a few days ago. (I've used elementaryOS 0.4 before on this laptop but I did not encounter an issue with the touchpad.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Touchpad does work*&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I put my laptop to suspend, then when I wake the laptop the touchpad starts working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Relevant Snippets from Commands&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;dmesg | grep -i elan&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;[ 12.947290] i2c-ELAN1000:00 supply vcc not found, using dummy regulator&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;[ 13.270470] input: Elan Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-ELAN1000:00/input/input12&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;cat /proc/bus/input/devices&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I: Bus=0018 Vendor=04f3 Product=0005 Version=0000&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;N: Name=&quot;Elan Touchpad&quot;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;P: Phys=&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;S: Sysfs=/devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-9/i2c-ELAN1000:00/input/input12&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;U: Uniq=&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;H: Handlers=mouse0 event12&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;B: PROP=5&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;B: EV=b&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;B: KEY=e520 10000 0 0 0 0&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;B: ABS=663800013000003&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;xinput --list&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;⎡ Virtual core pointer id=2 [master pointer (3)]&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;⎜ ↳ ...&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;⎜ ↳ Elan Touchpad id=12 [slave pointer (2)]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you need to see the output from any other command just post a comment.&lt;/p&gt;&#xA;" OwnerUserId="10016" LastActivityDate="2017-08-02T18:52:36.893" Title="Touchpad works only after waking from Suspend" Tags="|release-loki|touchpad|suspend|laptop|asus|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12257" PostTypeId="2" ParentId="9364" CreationDate="2017-06-02T22:13:16.567" Score="1" Body="&lt;p&gt;The rule #1 for installing Nvidia Drivers is to disable the &lt;code&gt;xorg-nouveau&lt;/code&gt; graphics driver package. Because it makes your computer into a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See this &lt;a href=&quot;http://lenovolinux.blogspot.pe/2016/05/bumblebee-on-lenovo-t440p-nvidia-gt.html?m=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;post&lt;/a&gt; for installing apropiately the nvidia driver.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastActivityDate="2017-06-02T22:13:16.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12258" PostTypeId="2" ParentId="1276" CreationDate="2017-06-03T04:36:31.787" Score="1" Body="&lt;p&gt;Thanks, adding the lines   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;--launcher.GTK_version&#xA;2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to the STS.ini file works fine for me. &lt;/p&gt;&#xA;" OwnerUserId="10023" LastActivityDate="2017-06-03T04:36:31.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12259" PostTypeId="1" CreationDate="2017-06-03T06:26:38.380" Score="1" ViewCount="363" Body="&lt;p&gt;When I set &lt;em&gt;Emacs(terminal)&lt;/em&gt; as my default editor and try to open a file, I get the error message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Failed to execute child process &quot;xterm&quot; (No such file or directory)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additionally, when I try to click on the &lt;em&gt;Emacs(terminal)&lt;/em&gt; application, nothing happens (presumably because of the same error).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can fix this by installing xterm (&lt;code&gt;sudo apt install xterm&lt;/code&gt;). Ideally, however, I'd prefer to use the pantheon-terminal to do this. How can I trigger the elementary terminal when opening terminal applications?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note:&#xA;I tried using the dconf editor. &lt;code&gt;org &amp;gt; gnome &amp;gt; desktop &amp;gt; applications &amp;gt; terminal&lt;/code&gt;. But the value for exec, 'pantheon-terminal' seems like it should open the elementary terminal.&lt;/p&gt;&#xA;" OwnerUserId="10025" LastEditorUserId="578" LastEditDate="2017-06-07T05:17:09.453" LastActivityDate="2024-01-10T18:00:45.083" Title="xterm crash - set pantheon-terminal to open terminal applications" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12260" PostTypeId="2" ParentId="11365" CreationDate="2017-06-03T07:00:03.000" Score="1" Body="&lt;p&gt;For this kind of errors I always search in the &lt;a href=&quot;https://aur.archlinux.org/packages/valama-git/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AUR&lt;/a&gt; for missing dependencies, when I install all the dependencies the problem, most of times fixes, if not you should read the oficial git/webpage because maybe it can have bugs. So check out if you have installed this packages:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;clutter-gtk&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;gdk-pixbuf2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;gdl&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;glade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;glib2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;gtksourceview3&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;intltool&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;libgee&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;webkit2gtk&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cmake&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;imagemagick&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;vala-0.26&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I hope this information will help you, for me worked like a charm.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-06-03T07:00:03.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12261" PostTypeId="2" ParentId="12247" CreationDate="2017-06-03T07:11:15.937" Score="0" Body="&lt;p&gt;This is lame but most of linux distros comes with prebuilt keybindings for people who quits windows, so... that explains your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried using CNTRL key instead of SUPER ?&#xA;if that doesn't work you should read &lt;a href=&quot;https://www.jetbrains.com/help/idea/2017.1/configuring-keyboard-shortcuts.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;.&#xA;And change the keymaps for your use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another solution is to change the keymap of the system for Mac support, maybe the kernel doesnt configure that well, have you checked that? Let me know&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i investigate more and found &lt;a href=&quot;https://askubuntu.com/questions/368437/how-do-i-remap-my-ubuntu-keyboard-shortcuts-to-match-osx&quot;&gt;this&lt;/a&gt; method if not try &lt;a href=&quot;https://askubuntu.com/questions/235533/how-to-set-keyboard-layout-for-a-macbook-pro&quot;&gt;this&lt;/a&gt; other one.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="8272" LastEditDate="2017-06-07T00:38:57.880" LastActivityDate="2017-06-07T00:38:57.880" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12263" PostTypeId="2" ParentId="12238" CreationDate="2017-06-03T11:20:16.173" Score="0" Body="&lt;p&gt;alright this is not an answer, but if e believe is a bug you can submit it here&#xA;&lt;a href=&quot;https://github.com/search?utf8=%E2%9C%93&amp;amp;q=is%3Aopen%20is%3Aissue%20user%3Aelementary%20label%3A%22bitesize%22&amp;amp;type=&quot; rel=&quot;nofollow noreferrer&quot;&gt;github&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-03T11:20:16.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12265" PostTypeId="1" CreationDate="2017-06-03T15:52:25.763" Score="0" ViewCount="97" Body="&lt;p&gt;Is it possible to run an OS by installing an OS within the USB/DVD like running an OS in pc/laptop ?&lt;/p&gt;&#xA;" OwnerUserId="10031" LastActivityDate="2017-07-07T00:37:11.717" Title="Installation of an OS within the USB/DVD" Tags="|usb|" AnswerCount="1" CommentCount="0" ClosedDate="2017-07-12T13:33:09.437" ContentLicense="CC BY-SA 3.0" />
  <row Id="12267" PostTypeId="1" AcceptedAnswerId="12268" CreationDate="2017-06-03T21:58:11.203" Score="1" ViewCount="6069" Body="&lt;p&gt;Elementary OS is the only OS I have installed on my laptop.  So I don't get a GRUB boot menu.  If I need to boot to the command line I typically hit E when the boot menu shows up, but since it goes straight to elementary OS this E option does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I access the terminal to do stuff while booting?&lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="578" LastEditDate="2017-06-07T05:14:08.773" LastActivityDate="2017-06-07T05:14:08.773" Title="How do you access the command line boot menu when not dual booting?" Tags="|boot|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12268" PostTypeId="2" ParentId="12267" CreationDate="2017-06-03T22:21:13.600" Score="2" Body="&lt;p&gt;You have to pres &lt;code&gt;Esc&lt;/code&gt; key once before the elementary logo appears.&#xA;Or, if you're not fast enough, edit grub file: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Comment (place a &lt;code&gt;#&lt;/code&gt; before) the two timeout lines, just like in the image bellow:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6Nu83.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6Nu83.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;o&lt;/code&gt; to save the modifications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;x&lt;/code&gt; to exit nano&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you'll get the GRUB screen, with a 5 seconds delay and you'll be able to do your thing. To revert, just un-comment those two lines and run &lt;code&gt;update-grub&lt;/code&gt; again. I recommend not modifying anything else, unless you know what you're doing...&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-06-03T22:21:13.600" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12269" PostTypeId="2" ParentId="1276" CreationDate="2017-06-04T03:27:46.997" Score="0" Body="&lt;p&gt;this problem is because of gtk error,so its does not intializing graphics for eclipse.add type the command in the command promt-&#xA;sudo -i scratch-text-editor /opt/eclipse/eclipse.ini&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and add the following line-&#xA;launcher.GTK_version&#xA;2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;last of page .&lt;/p&gt;&#xA;" OwnerUserId="8499" LastActivityDate="2017-06-04T03:27:46.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12270" PostTypeId="2" ParentId="6840" CreationDate="2017-06-04T10:45:11.390" Score="1" Body="&lt;p&gt;For ElementaryOS Loki users to replace the &quot;Applications&quot; text in the wingpanel with an icon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;open &lt;strong&gt;/usr/share/themes/yourtheme/gtk.css&lt;/strong&gt; or&#xA;&lt;strong&gt;/home/username/.themes/yourtheme/gtk.css&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;copy desired icon (&lt;em&gt;icon.svg&lt;/em&gt; in this example) to this folder and add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel {&#xA;  background-color: transparent;&#xA;  background-image: url(&quot;icon.svg&quot;); &#xA;  background-repeat: no-repeat;&#xA;}&#xA;&#xA;.panel .menubar:first-child {&#xA;  font-size: 0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you selected &quot;prefer dark variant&quot; in elementary-tweaks, you may need to change gtk-dark.css instead of gtk.css&lt;/p&gt;&#xA;" OwnerUserId="10040" LastEditorUserId="10040" LastEditDate="2017-06-06T00:43:05.670" LastActivityDate="2017-06-06T00:43:05.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12272" PostTypeId="2" ParentId="12045" CreationDate="2017-06-04T18:05:39.200" Score="1" Body="&lt;p&gt;Try to update plugging in  external keyboard and mouse. I have solved the problem in this way. &lt;/p&gt;&#xA;" OwnerUserId="10045" LastActivityDate="2017-06-04T18:05:39.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12273" PostTypeId="1" CreationDate="2017-06-04T18:09:37.480" Score="-1" ViewCount="574" Body="&lt;p&gt;Need to install testdisc by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install testdisk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it shows me the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;You might want to run 'apt-get -f install' to correct these:&#xA;    The following packages have unmet dependencies:&#xA;     kde-cli-tools : Depends: kde-cli-tools-data (= 4:5.5.5-0ubuntu1.1) but it is not going to be installed&#xA;     libksgrd7 : Depends: libkf5sysguard-data (= 4:5.5.5-0ubuntu2) but it is not going to be installed&#xA;     libprocesscore7 : Depends: libkf5sysguard-data (= 4:5.5.5-0ubuntu2) but it is not going to be installed&#xA;     libprocessui7 : Depends: libkf5sysguard-data (= 4:5.5.5-0ubuntu2) but it is not going to be installed&#xA;    E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;a solution).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying &lt;code&gt;apt-get -f install&lt;/code&gt; it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied)&#xA;E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What to do?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="10046" LastEditorUserId="578" LastEditDate="2017-06-07T05:10:44.910" LastActivityDate="2017-06-07T05:10:44.910" Title="installing testdisk" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12274" PostTypeId="2" ParentId="12273" CreationDate="2017-06-04T19:01:28.130" Score="1" Body="&lt;p&gt;The first comand is wrong. It should be like this:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install testdisk&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second command must begin with sudo:&lt;br&gt;&#xA;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The message is quite clear: &quot;Are you root?&quot;... Whenever you meet messages like these, check to see if you have permission to acces that resource; root has permission everywhere, and this is what &lt;code&gt;sudo&lt;/code&gt; does (runs a command as root); or run &lt;code&gt;sudo su&lt;/code&gt;, input your password, and now you can run commands without &lt;code&gt;sudo&lt;/code&gt; (i.e. every command will be run as root - NOT RECOMMENDED)&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-06-04T19:01:28.130" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12275" PostTypeId="1" CreationDate="2017-06-04T19:24:25.823" Score="0" ViewCount="80" Body="&lt;p&gt;Super noob question but I'm assuming the drivers are probably the same. The USB adapter in question is &lt;a href=&quot;http://rads.stackoverflow.com/amzn/click/B00EQT0YK2&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;. Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="10047" LastActivityDate="2017-06-04T23:16:28.850" Title="Will a USB WiFi adapter that works for other Linux distros work with Elementary OS?" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12276" PostTypeId="1" CreationDate="2017-06-04T21:41:45.573" Score="1" ViewCount="3429" Body="&lt;p&gt;So, my problem is that I have a Windows and Linux share I connect to for working with files and my web server each day, but having to open the network folders through Files every time I turn the laptop back on only to close the folders again, seeing as I access the files I need through other programs, I wanted to know if there's a way to have them auto-connect or even auto-mount as soon as the OS boots and I log in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It was easy to do with other distros and I love elementary OS, but this is something I need to work more efficiently.  Any help would be greatly appreciated!&lt;/p&gt;&#xA;" OwnerUserId="10048" LastActivityDate="2024-03-16T19:04:50.597" Title="Connect to network share on startup" Tags="|pantheon-files|networking|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12277" PostTypeId="2" ParentId="12275" CreationDate="2017-06-04T23:16:28.850" Score="1" Body="&lt;p&gt;If it works in Ubuntu (more specifically, if the tested Ubuntu distro matches your current elementary kernel version), it will work on elementary.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-06-04T23:16:28.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12278" PostTypeId="1" CreationDate="2017-06-05T03:36:10.750" Score="1" ViewCount="2550" Body="&lt;p&gt;I recently installed Elementary OS in my laptop. (Toshiba Satellite C55-B5356) and I cannot seem to get my touchpad to work. As far as I can tell, it's enabled. xinput list seems to recognize it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SynPS/2 Synaptics TouchPad  id=11   [slave  pointer  (2)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it shows as enabled in its properties&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device 'SynPS/2 Synaptics TouchPad':&#xA;Device Enabled (140):   1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Even /var/log/Xorg.0.log makes me think it is being recognized it, yet it doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)&#xA;SynPS/2 Synaptics TouchPad: Applying InputClass &quot;evdev touchpad catchall&quot;&#xA;SynPS/2 Synaptics TouchPad: Applying InputClass &quot;evdev touchscreen catchall&quot;&#xA;SynPS/2 Synaptics TouchPad: Applying InputClass &quot;touchpad catchall&quot;&#xA; SynPS/2 Synaptics TouchPad: Applying InputClass &quot;Default clickpad buttons&quot;&#xA;SynPS/2 Synaptics TouchPad: Applying InputClass &quot;touchpad catchall&quot;&#xA; SynPS/2 Synaptics TouchPad: Applying InputClass &quot;Default clickpad buttons&quot;&#xA; LoadModule: &quot;synaptics&quot;&#xA; Loading /usr/lib/xorg/modules/input/synaptics_drv.so&#xA;Module synaptics: vendor=&quot;X.Org Foundation&quot;&#xA;compiled for 1.18.1, module version = 1.8.2&#xA;Module class: X.Org XInput Driver&#xA;ABI class: X.Org XInput driver, version 22.1&#xA;Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'&#xA;SynPS/2 Synaptics TouchPad: always reports core events&#xA;Option &quot;Device&quot; &quot;/dev/input/event5&quot;&#xA;synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-    multitouch device&#xA;synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1192 - 5752 (res 51)&#xA;synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1002 - 4872 (res 77)&#xA;synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255&#xA;synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15&#xA;synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple&#xA;synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7&#xA;synaptics: SynPS/2 Synaptics TouchPad: touchpad found&#xA;SynPS/2 Synaptics TouchPad: always reports core events&#xA;Option &quot;config_info&quot;         &quot;udev:/sys/devices/platform/i8042/serio1/input/input5/event5&quot;&#xA;XINPUT: Adding extended input device &quot;SynPS/2 Synaptics TouchPad&quot; (type: TOUCHPAD, id 11)&#xA;synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5&#xA;synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75&#xA;synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.033&#xA;SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1&#xA;SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1&#xA;SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000&#xA;SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4&#xA;synaptics: SynPS/2 Synaptics TouchPad: touchpad found&#xA;config/udev: Adding input device SynPS/2 Synaptics TouchPad     (/dev/input/mouse0)&#xA;SynPS/2 Synaptics TouchPad: Ignoring device from InputClass &quot;touchpad     ignore duplicates&quot;&#xA;config/udev: Adding input device Toshiba input device (/dev/input/event6)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any idea what could be wrong? &lt;/p&gt;&#xA;" OwnerUserId="10049" LastActivityDate="2019-08-25T03:05:45.720" Title="My touchpad isn't working" Tags="|release-loki|settings|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12279" PostTypeId="1" CreationDate="2017-06-05T04:12:02.067" Score="6" ViewCount="315" Body="&lt;p&gt;I'd like to use my Apple wired keyboard with Elementary OS, so I want to swap the &lt;kbd&gt;Alt&lt;/kbd&gt; and &lt;kbd&gt;Super&lt;/kbd&gt; keys. I've tried the changes that work for Ubuntu but they have no effect. Can anyone advise?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10051" LastEditorUserId="16827" LastEditDate="2019-01-09T09:51:26.253" LastActivityDate="2019-04-01T10:58:12.037" Title="Apple keyboard - swap alt and super keys" Tags="|release-loki|keyboard|apple|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12280" PostTypeId="2" ParentId="12278" CreationDate="2017-06-05T04:56:19.670" Score="1" Body="&lt;p&gt;I noticed that Synaptics drivers for linux are no longer being mantained, so is espected that some people wil have bugs, Archlinux community recommends to use the &lt;code&gt;libinput&lt;/code&gt; package instead of synaptics. With you output seems like the kernel doesn't know what driver use, maybe is missing some configuration?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First able do you cheked out if you disabled the touchpad input? Fn + F5 keys&#xA;If the problem persists update the post with your synaptics configuration in &lt;code&gt;/usr/share/X11/xorg.conf.d/somethingwith-synaptics.conf&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check out this &lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=174662&quot; rel=&quot;nofollow noreferrer&quot;&gt;post&lt;/a&gt; seems that someone fixed that with the command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xinput set-prop &amp;lt;11&amp;gt; &quot;Device Enabled&quot; #&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can check the ArchLinux Wiki for further information &lt;a href=&quot;https://wiki.archlinux.org/index.php/Touchpad_Synaptics&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastActivityDate="2017-06-05T04:56:19.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12282" PostTypeId="1" CreationDate="2017-06-05T09:22:10.263" Score="0" ViewCount="1200" Body="&lt;p&gt;I have installed elementary OS on my HP 2000-2128 notebook. But screen is faint and bright. To change contrast i have added &lt;code&gt;xgamma -gamma 0.7&lt;/code&gt; to startup command. But on reboot it automatically changes to 1, so that at every reboot I have reset screen contrast to &lt;code&gt;xgamma -gamma 0.7&lt;/code&gt; through terminal.&lt;/p&gt;&#xA;" OwnerUserId="10052" LastEditorUserId="16827" LastEditDate="2019-10-22T05:32:22.553" LastActivityDate="2024-02-28T15:04:05.557" Title="Gamma value reset on reboot" Tags="|release-loki|startup|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="12283" PostTypeId="1" CreationDate="2017-06-05T12:36:32.067" Score="0" ViewCount="376" Body="&lt;p&gt;I installed elementary OS on a hp laptop, and everything was working fine. Suddenly, after 3 days Internet connection does not work anymore. The laptop connects to the WiFi, but Internet won't work. I installed Elementary in dual boot, and when using Windows the laptop connects to the Internet normally...&lt;/p&gt;&#xA;" OwnerUserId="10054" LastActivityDate="2024-04-04T13:09:01.200" Title="WiFi does not work anymore" Tags="|wifi|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12284" PostTypeId="2" ParentId="8504" CreationDate="2017-06-05T12:47:58.550" Score="2" Body="&lt;p&gt;Most TVs &quot;overscan&quot; by default, which cuts of the edges of the picture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll want to turn this off in the settings of your TV. Oftentimes you'll find a button on the remote or a setting in the &quot;Picture&quot; settings on your TV to change the size or overscan settings of the output. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, you might be able to switch from &lt;strong&gt;16x9&lt;/strong&gt; to &lt;strong&gt;Screen fit&lt;/strong&gt;, or something similar depending on the TV brand.&lt;/p&gt;&#xA;" OwnerUserId="10042" LastEditorUserId="308" LastEditDate="2018-02-01T16:29:14.557" LastActivityDate="2018-02-01T16:29:14.557" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12285" PostTypeId="2" ParentId="12283" CreationDate="2017-06-05T17:09:43.497" Score="0" Body="&lt;p&gt;I solved by overwriting the resolv.conf file with only two lines:&#xA;nameserver 8.8.8.8&#xA;nameserver 8.8.4.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I fear I shouldn't have completely overwritten the file with only those two lines. I'm completely new to Linux; do you think it will generate more problems?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="10057" LastActivityDate="2017-06-05T17:09:43.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12286" PostTypeId="1" CreationDate="2017-06-05T18:12:29.480" Score="0" ViewCount="811" Body="&lt;p&gt;I want to create a keyboard shortcut for opening a program in a new terminal. So I went to System Settings - Keyboard - Shortcuts - Custom and assigned the command &lt;code&gt;pantheon-terminal -e htop&lt;/code&gt; to a key combination. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If no terminal is open, this works perfectly. It opens a new terminal with the program. But when one or more terminals are open, it just creates a new tab in one of the open ones. And don't even focus the terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to open the program in a complete new window?&lt;/p&gt;&#xA;" OwnerUserId="9526" LastActivityDate="2017-06-07T05:10:15.700" Title="Shortcut to pantheon-terminal opens tab instead of new window" Tags="|pantheon-terminal|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12287" PostTypeId="2" ParentId="12286" CreationDate="2017-06-05T19:34:20.513" Score="1" Body="&lt;p&gt;Still haven't found the solution for pantheon-terminal, however if you don't mind installing gnome-terminal you have this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome-terminal -x sh -c &quot;./myscript.sh&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;Running &lt;code&gt;pantheon-terminal -e htop&lt;/code&gt; never worked for me, however &#xA;you can change the terminal to open without tabs at all.&#xA;Install gsettings&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then go to &quot;org &gt; pantheon &gt; terminal &gt; settings&quot;&#xA;double click on &quot;tab-bar-behavior&quot; and select &quot;never show tabs&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="8520" LastEditDate="2017-06-05T19:44:44.327" LastActivityDate="2017-06-05T19:44:44.327" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12288" PostTypeId="1" AcceptedAnswerId="16359" CreationDate="2017-06-05T20:22:13.233" Score="4" ViewCount="2242" Body="&lt;p&gt;My pantheon greeter runs at 3840x2160@60Hz but all elements are too small.&#xA;On the desktop I managed to enable&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface scaling-factor 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;what did the job of enlarging gui elements on UHD resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I enable HiDPI scaling in the pantheon greeter?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My System:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;System:    Host: LinuxLab2 Kernel: 4.8.0-53-generic x86_64 (64 bit gcc: 5.4.0)&#xA;           Desktop: Gnome  (Gtk 3.18.9-1ubuntu3.3) Distro: elementary 0.4.1 loki&#xA;Machine:   Mobo: ASUSTeK model: Z170-DELUXE v: Rev 1.xx Bios: American Megatrends v: 1902 date: 06/27/2016&#xA;CPU:       Quad core Intel Core i7-6700K (-HT-MCP-) cache: 8192 KB&#xA;           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 32064&#xA;           clock speeds: max: 4300 MHz 1: 799 MHz 2: 799 MHz 3: 799 MHz 4: 800 MHz 5: 800 MHz 6: 800 MHz&#xA;           7: 799 MHz 8: 800 MHz&#xA;Graphics:  Card: NVIDIA Device 1b80 bus-ID: 01:00.0&#xA;           Display Server: X.Org 1.18.4 drivers: nvidia (unloaded: fbdev,vesa,nouveau)&#xA;           Resolution: 3840x2160@59.94hz&#xA;           GLX Renderer: GeForce GTX 1080/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 381.22 Direct Rendering: Yes&#xA;Audio:     Card-1 NVIDIA Device 10f0 driver: snd_hda_intel bus-ID: 01:00.1 Sound: ALSA v: k4.8.0-53-generic&#xA;           Card-2 Intel Sunrise Point-H HD Audio driver: snd_hda_intel bus-ID: 00:1f.3&#xA;Network:   Card-1: Intel Ethernet Connection (2) I219-V driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6&#xA;           IF: enp0s31f6 state: up speed: 100 Mbps duplex: full mac: &amp;lt;filter&amp;gt;&#xA;           Card-2: Broadcom BCM4360 802.11ac Wireless Network Adapter driver: wl bus-ID: 07:00.0&#xA;           IF: wlp7s0 state: down mac: &amp;lt;filter&amp;gt;&#xA;           Card-3: Intel I211 Gigabit Network Connection driver: igb v: 5.3.0-k port: c000 bus-ID: 0b:00.0&#xA;           IF: enp11s0 state: down mac: &amp;lt;filter&amp;gt;&#xA;Drives:    HDD Total Size: 2575.6GB (2.5% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 256.1GB&#xA;           ID-2: /dev/sdb model: Samsung_SSD_850 size: 1024.2GB&#xA;           ID-3: /dev/sdc model: WDC_WD1002FAEX size: 1000.2GB&#xA;           ID-4: /dev/sdd model: KINGSTON_SH100S3 size: 120.0GB&#xA;           ID-5: /dev/sde model: KINGSTON_SV300S3 size: 120.0GB&#xA;           ID-6: USB /dev/sdf model: SNA size: 55.0GB&#xA;Partition: ID-1: / size: 110G used: 60G (58%) fs: ext4 dev: /dev/sdd1&#xA;RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present&#xA;Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C gpu: 0.0:54C&#xA;           Fan Speeds (in rpm): cpu: 0&#xA;Info:      Processes: 257 Uptime: 3:01 Memory: 3091.1/32089.9MB Init: systemd runlevel: 5 Gcc sys: 5.4.0&#xA;           Client: Shell (bash 4.3.481) inxi: 2.2.35&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-10-02T09:39:51.537" LastActivityDate="2018-10-02T09:39:51.537" Title="(SOLVED) How to enable HiDPI scaling in the pantheon greeter?" Tags="|release-loki|greeter|pantheon|release-juno|hidpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12290" PostTypeId="1" AcceptedAnswerId="12291" CreationDate="2017-06-06T01:20:01.183" Score="0" ViewCount="856" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iswaD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iswaD.jpg&quot; alt=&quot;Update progress reached this point after 30 minutes then stuck for the past ~8 hours&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was trying to update the operating system through AppCenter.  It has been running for over 8 hours (still running).  Would like to know:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is this normal?&lt;/li&gt;&#xA;&lt;li&gt;Is it safe to stop the update?&lt;/li&gt;&#xA;&lt;li&gt;Any way to stop this safely...&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For now I have made a backup of my files.  I have experienced something similar in the past and tried to solve it by force shut down the system.  A bad move that resulted in a complete OS reinstall..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if any more information is needed.  Any help or advice is greatly appreciated!&lt;/p&gt;&#xA;" OwnerUserId="10062" LastActivityDate="2017-06-06T01:59:51.027" Title="Operating system updates using AppCenter stuck" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12291" PostTypeId="2" ParentId="12290" CreationDate="2017-06-06T01:59:51.027" Score="1" Body="&lt;p&gt;If this is a fresh install, I always log in and restart before running any updates because I've had this issue as well. Logging out of your session might fix it.&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2017-06-06T01:59:51.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12294" PostTypeId="2" ParentId="11994" CreationDate="2017-06-06T06:06:19.290" Score="1" Body="&lt;p&gt;I found the Preference Opening Specification that contains a list of settings URIs used by Switchboard: &lt;a href=&quot;https://docs.google.com/document/d/1N0uqNtVXEFn3cLgNMeN75mP_dpMpCco-7uw5PKow-_Q/edit&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.google.com/document/d/1N0uqNtVXEFn3cLgNMeN75mP_dpMpCco-7uw5PKow-_Q/edit&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But due to the spec is old, there are missing URIs and some are not working for the following options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Notifications&lt;/li&gt;&#xA;&lt;li&gt;Security &amp;amp; Privacy/Locking&lt;/li&gt;&#xA;&lt;li&gt;Printers [Not Working]&lt;/li&gt;&#xA;&lt;li&gt;Sound/Input&lt;/li&gt;&#xA;&lt;li&gt;Sound/Sound Effects&lt;/li&gt;&#xA;&lt;li&gt;Sound/Applications&lt;/li&gt;&#xA;&lt;li&gt;Network [Not Working]&lt;/li&gt;&#xA;&lt;li&gt;Online Accounts [Not Working]&lt;/li&gt;&#xA;&lt;li&gt;About&lt;/li&gt;&#xA;&lt;li&gt;Parental Control&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9783" LastActivityDate="2017-06-06T06:06:19.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12296" PostTypeId="1" CreationDate="2017-06-06T12:48:55.287" Score="0" ViewCount="428" Body="&lt;p&gt;Installed elementary os When watching videos and some apps starts overheating CPU. The HP Probook 4530s . Please tell me what to do ?&lt;/p&gt;&#xA;" OwnerUserId="10069" LastActivityDate="2019-08-27T01:02:15.327" Title="Overheating of the system in video viewing" Tags="|videos|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12297" PostTypeId="2" ParentId="12282" CreationDate="2017-06-06T14:08:28.357" Score="0" Body="&lt;p&gt;I've read some articles where this command isn't working, which really depends on different types of hardware. You could try installing xbacklight: &lt;code&gt;sudo apt-get install xbacklight&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then setting a startup command &lt;code&gt;xbacklight -set 70&lt;/code&gt; the same way you did for the xgamma command, via the Startup Applications window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let met know if this works out for you, I'm still learning Linux myself, but this neat workaround is something that worked for me though.&lt;/p&gt;&#xA;" OwnerUserId="10044" LastEditorUserId="10044" LastEditDate="2017-06-06T14:54:06.827" LastActivityDate="2017-06-06T14:54:06.827" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12299" PostTypeId="2" ParentId="12296" CreationDate="2017-06-06T22:11:59.433" Score="1" Body="&lt;p&gt;the first thing i would do is clean the fan from any dust. get compressed air in a can or via a compressor.  unplug power cable and battery. then spray in the fan holes from the buttom to the exit of the fan heat output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;let me note that windows has a cap of 85°c linux has a cap of 95°c  so linux runs hotter.  therefore a laptop was not build to be placed on you lap use solid underground.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;software wise you could install tlp or powertop (only pick one not both)  they will limit speeds of the cpu to maintain better heat output.&lt;/p&gt;&#xA;" OwnerUserId="94" LastActivityDate="2017-06-06T22:11:59.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12300" PostTypeId="1" CreationDate="2017-06-06T22:36:29.910" Score="0" ViewCount="855" Body="&lt;p&gt;Like the title says, my wifi card seems to have stopped working. My ethernet is working fine though. The results from my lshw -C network are as followed &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network UNCLAIMED&#xA;   description: Network controller&#xA;   product: BCM43224 802.11a/b/g/n&#xA;   vendor: Broadcom Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   version: 01&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list&#xA;   configuration: latency=0&#xA;   resources: memory:c1b00000-c1b03fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If anyone could help me out it would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="10075" LastActivityDate="2019-08-27T04:04:05.370" Title="My wifi has stopped working, unclaimed network?" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12301" PostTypeId="2" ParentId="12300" CreationDate="2017-06-06T23:03:34.010" Score="1" Body="&lt;p&gt;SOLVED. I followed the steps in this guide &lt;a href=&quot;https://wiki.debian.org/brcm80211#Installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;wiki.debian&lt;/a&gt; and it was able to fix my problem. Just needed to reinstall the brcmsmac driver&lt;/p&gt;&#xA;" OwnerUserId="10075" LastActivityDate="2017-06-06T23:03:34.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12302" PostTypeId="2" ParentId="11573" CreationDate="2017-06-06T23:19:32.663" Score="-1" Body="&lt;p&gt;It is not possible natively, but have a look at super wingpanel. &lt;a href=&quot;https://heathpaddock.com/2013/12/14/super-wingpanel/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://heathpaddock.com/2013/12/14/super-wingpanel/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10077" LastActivityDate="2017-06-06T23:19:32.663" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12303" PostTypeId="2" ParentId="12265" CreationDate="2017-06-07T00:36:50.440" Score="0" Body="&lt;p&gt;I think you're looking for a Persistent USB install of Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I googled around and found &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5i3oym/creating_a_persistent_live_usb_of_elementary_os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this discussion on Reddit&lt;/a&gt; and &lt;a href=&quot;https://unix.stackexchange.com/questions/255860/how-to-make-elementary-os-persistent&quot;&gt;this one on StackExchange&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The TL;DR is that it isn't as straightforward as clicking a few buttons, but it can be done with minimal effort. You'll need a big-ish USB drive too.&lt;/p&gt;&#xA;" OwnerUserId="10004" LastActivityDate="2017-06-07T00:36:50.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12305" PostTypeId="2" ParentId="12286" CreationDate="2017-06-07T05:10:15.700" Score="0" Body="&lt;p&gt;There is no command line argument to open a new window in a running &lt;code&gt;pantheon-terminal&lt;/code&gt; instance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a keyboard shortcut to open a new terminal window, but not with any commands to run in it: &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;n&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-06-07T05:10:15.700" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12306" PostTypeId="2" ParentId="12267" CreationDate="2017-06-07T05:13:55.490" Score="1" Body="&lt;p&gt;You can hold down the (right) shift key while booting, before the elementary logo appears to get the Grub menu displayed.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-06-07T05:13:55.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12307" PostTypeId="2" ParentId="2059" CreationDate="2017-06-07T08:31:17.493" Score="8" Body="&lt;p&gt;If you prefer to do things in the terminal, simply run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings natural-copy-paste false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before Elementary OS 5.0, it was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings natural-copy-paste false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7693" LastEditorUserId="9692" LastEditDate="2020-01-04T06:27:24.740" LastActivityDate="2020-01-04T06:27:24.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12308" PostTypeId="1" AcceptedAnswerId="12411" CreationDate="2017-06-07T08:37:24.603" Score="6" ViewCount="3036" Body="&lt;p&gt;My Google Chrome-browser suddenly locks up every time i try to upload any image. I've tryed uploading to canvas, facebook etc, but every time the image is done uploading, the browser locks up, and i have to reboot. Any ideas?&lt;/p&gt;&#xA;" OwnerDisplayName="user9985" LastEditorUserId="16827" LastEditDate="2019-10-22T05:31:19.837" LastActivityDate="2019-10-22T05:31:19.837" Title="Chrome locks up when uploading images" Tags="|release-loki|google-chrome|" AnswerCount="2" CommentCount="5" ClosedDate="2019-04-20T05:24:34.197" ContentLicense="CC BY-SA 3.0" />
  <row Id="12312" PostTypeId="1" CreationDate="2017-06-07T14:16:10.323" Score="2" ViewCount="135" Body="&lt;p&gt;Good day!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a problem installing Steam on my machine:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The clients successfully downloads and installs itself. After installation it presents me the login window.&lt;/li&gt;&#xA;&lt;li&gt;After I type in my credentials, login window hangs without any reaction to any input.&lt;/li&gt;&#xA;&lt;li&gt;If I kill the steam process and restart it, it opens the window &quot;Connecting Steam account: [my username]&quot;, which hangs again.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;In the terminal some the last lines which the client prints are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(steam:16767): GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support&#xA;&#xA;(steam:16767): GLib-CRITICAL **: g_regex_replace_eval: assertion `regex != NULL' failed&#xA;&#xA;(steam:16767): GLib-CRITICAL **: g_regex_unref: assertion `regex != NULL' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I've tried:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;installing steam from official website and from ubuntu repo, even old 1.0.0.45 version&lt;/li&gt;&#xA;&lt;li&gt;deleting &lt;code&gt;~/.steam&lt;/code&gt; and &lt;code&gt;~/.local/share/Steam&lt;/code&gt; then redownloading the client. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;No change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My system:&lt;/strong&gt; elementary OS 0.4 which is based on Ubuntu 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suppose steam's bundled glib conflicts with glib installed on my system. But I don't know what to do with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope someone would help me on this issue. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="7540" OwnerDisplayName="bgeyts668" LastActivityDate="2017-06-07T14:22:07.993" Title="Steam is stuck on login, assertion 'regex != NULL' failed" Tags="|games|steam|" AnswerCount="0" CommentCount="0" ClosedDate="2019-10-22T05:30:11.867" ContentLicense="CC BY-SA 3.0" />
  <row Id="12314" PostTypeId="1" CreationDate="2017-06-07T15:36:31.533" Score="0" ViewCount="1793" Body="&lt;p&gt;I am using elementary OS 0.4.1 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The about page says:&#xA;Built on &quot;Ubuntu 16.04.2 LTS&quot;&#xA;Kernel version: 4.4.0-75-generic&#xA;GTK version: 3.18.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed Chrome Remote Desktop.  The file &lt;code&gt;~/.chrome-remote-desktop-session&lt;/code&gt; contains:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exec /usr/sbin/lightdm-session &quot;gnome-session --session=pantheon&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I restart the chrome-remote-desktop.service.&#xA;I connect from another computer.&#xA;I see the elementary OS background image.&#xA;It asks me to authenticate.&#xA;After that--nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I still see the background image, but nothing else appears in the display.  There's no dock and nothing in the upper regions--just an empty screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;None of the keystrokes or mouse interactions that I've tried has elicited a response.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can go back to &lt;code&gt;~/.chrome-remote-desktop-session&lt;/code&gt; and enter this (after installing xfce4):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exec /usr/sbin/lightdm-session &quot;startxfce4&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then when I connect from another computer, I see everything I expect to see.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can then use all the tools available in that interface, and this is great, but I'd really, really like to use elementary OS this way instead.&lt;/p&gt;&#xA;" OwnerUserId="10085" LastEditorUserId="578" LastEditDate="2017-08-01T22:42:27.717" LastActivityDate="2017-08-01T22:43:05.553" Title="Chrome Remote Desktop not working with elementary OS 0.4.1 Loki" Tags="|release-loki|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12316" PostTypeId="1" CreationDate="2017-06-07T16:07:13.577" Score="1" ViewCount="309" Body="&lt;p&gt;I have NVidia driver 375.66.  I can go to &lt;code&gt;nvidia-settings&lt;/code&gt; &gt; PRIME profiles &gt; Select GPU &gt; Intel (Power Saving Mode).  Logout to confirm the switch.  When I do this my machine becomes extremely unstable.  The entire OS freezes constantly.  I switch back to Nvidia (performance mode) and the system runs fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Arch-Linux says I have several &lt;a href=&quot;https://wiki.archlinux.org/index.php/Dell_XPS_15_9560&quot; rel=&quot;nofollow noreferrer&quot;&gt;options&lt;/a&gt;:  Open source driver, a proprietary driver with bumblebee, or Proprietary driver with PRIME output offloading.  I don't know which is best for me.  My goal is to save power by switching to the integrated graphics when I'm on battery (so the open-source driver is out the question because of power consumption issues, see arch Linux link).  I want to keep the option to use the more powerful 1050 GPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I upgrade the Intel driver without impacting the Nvidia driver? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;System:  Intel HD Graphics on Dell XPS 15 9560 (2017 model). &lt;/p&gt;&#xA;" OwnerUserId="9738" LastEditorUserId="11882" LastEditDate="2020-01-01T05:55:38.950" LastActivityDate="2020-01-01T05:55:38.950" Title="Is the Intel graphics driver separate from the NVidia driver?" Tags="|release-loki|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="12317" PostTypeId="1" CreationDate="2017-06-07T19:56:04.150" Score="1" ViewCount="323" Body="&lt;p&gt;In Elementary OS Loki, if I run the command&#xA;    xmodmap -e &quot;keysym Super_L = Multi_key&quot;&#xA;it works nicely, and I can use the left Windows key as Composer. But the effect do not last. If a lock the screen and when around for a while (cannot say how long, but say half an hour), when I come back I have to run xmodmap again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why?&lt;/p&gt;&#xA;" OwnerUserId="9073" LastActivityDate="2019-04-20T10:01:15.203" Title="Why xmodmap effect do not last" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12319" PostTypeId="1" CreationDate="2017-06-07T21:00:50.323" Score="1" ViewCount="458" Body="&lt;p&gt;On Loki 0.4.1, when using the latest Google Chrome Version 59.0.3071.86 (Official Build) (64-bit), when trying to upload a file to a web page with the invoked Pantheon File Browser, somehow Chrome loses all inputs until Chrome is restarted completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the page accepts drag and drop, it'll work just fine as a work around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea as to what's going on here?&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2017-06-22T21:06:53.997" Title="Google Chrome Browser loses input when Pantheon File Browser is invoked for file upload" Tags="|release-loki|pantheon-files|google-chrome|" AnswerCount="4" CommentCount="2" ClosedDate="2019-04-20T05:24:06.530" ContentLicense="CC BY-SA 3.0" />
  <row Id="12321" PostTypeId="2" ParentId="12319" CreationDate="2017-06-08T03:43:06.740" Score="1" Body="&lt;p&gt;So I just had a Files and OS update get pushed, and suddenly this is no longer an issue. That was fast! Very awesome... so far I've been loving Elementary OS!&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2017-06-08T03:43:06.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12323" PostTypeId="2" ParentId="12319" CreationDate="2017-06-08T08:38:18.827" Score="1" Body="&lt;p&gt;Files 0.3.5 update fixed this issue. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="10081" LastActivityDate="2017-06-08T08:38:18.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12324" PostTypeId="2" ParentId="10364" CreationDate="2017-06-08T09:19:02.813" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-ruby-on-rails-with-rbenv-on-ubuntu-14-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.digitalocean.com/community/tutorials/how-to-install-ruby-on-rails-with-rbenv-on-ubuntu-14-04&lt;/a&gt;?&#xA;follow it step by step&#xA;the before installing ruby build environment use&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reasons my Ubuntu platform were missing some dependencies and by forcing the following installation, it solve the prblem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install autoconf bison build-essential libssl-dev libyaml-dev libreadline6 libreadline6-dev zlib1g zlib1g-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In particular I got installed the following extra packages using sudo apt-get install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;automake autotools-dev g++ g++-4.8 libbison-dev libc6-dev libsigsegv2&#xA;  libssl-doc libstdc++-4.8-dev linux-libc-dev m4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as well as the following NEW packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;autoconf automake autotools-dev bison build-essential g++ g++-4.8&#xA;  libbison-dev libc6-dev libsigsegv2 libssl-dev libssl-doc libstdc++-4.8-dev&#xA;  linux-libc-dev m4 zlib1g-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After installing all these dependencies install ruby using the steps given in the above link.&#xA;It worked for me.&lt;/p&gt;&#xA;" OwnerUserId="10098" LastActivityDate="2017-06-08T09:19:02.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12325" PostTypeId="1" CreationDate="2017-06-08T12:07:13.590" Score="0" ViewCount="128" Body="&lt;p&gt;this is not a typical question, but a suggestion what would be great to see in the further development of elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been a user of various linux distributions for several years now and stayed on elem-OS. I have my favorite apps and I know how to search for new ones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to introduce the elementary OS to my girlfriend, but also I would like to prevent actions like that she call me every time when she's looking for new fine apps ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorting apps by popularity (like number of downloads) would help to show the best applications to less advanced users.&lt;/p&gt;&#xA;" OwnerUserId="10099" LastActivityDate="2017-06-13T11:15:18.397" Title="Sort applications in app center by number of downloads" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12326" PostTypeId="1" AcceptedAnswerId="12339" CreationDate="2017-06-08T13:49:20.493" Score="0" ViewCount="131" Body="&lt;p&gt;I'm using relase loki and I have installed software-properties-gtk I see that there is an option to enable updates and I was wondering if I should enable them on elementary. &lt;/p&gt;&#xA;" OwnerDisplayName="user10100" LastActivityDate="2017-06-10T07:11:24.057" Title="Should I enable ubuntu updates in software-properties-gtk?" Tags="|updates|applications|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12327" PostTypeId="2" ParentId="12245" CreationDate="2017-06-08T18:43:54.473" Score="0" Body="&lt;p&gt;I actually could fix it myself. It had to do with the &quot;Encrypt my home folder&quot; option that I had ticked when installing the system. I don't know why exactly this behaviour was happening, but I could get around it by disabling the encryption of my &lt;code&gt;/home/&lt;/code&gt;. Followed &lt;a href=&quot;https://www.howtogeek.com/116179/how-to-disable-home-folder-encryption-after-installing-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; tutorial to do so.&lt;/p&gt;&#xA;" OwnerUserId="10002" LastActivityDate="2017-06-08T18:43:54.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12328" PostTypeId="1" CreationDate="2017-06-08T23:17:57.613" Score="0" ViewCount="116" Body="&lt;p&gt;All, I have a Dell XPS 13 series 9350, with eOS Loki ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I bought the Dell DA-100 adapter with the sole purpose to extend my screen to a projector/TV via HDMI.  The NIC card on the DA-100 is detected, but the HDMI port is not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I please get some help making my DA-100 adapter work ... if this is not possible, what USB (USB-c) device is supported under Loki to extend my screen to HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much for the help.&#xA;Bill&lt;/p&gt;&#xA;" OwnerUserId="10103" LastActivityDate="2023-12-10T23:00:30.047" Title="DA100 - XPS 9350 support - Loki" Tags="|release-loki|display|graphic-drivers|hdmi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12330" PostTypeId="1" CreationDate="2017-06-09T05:31:59.380" Score="1" ViewCount="3120" Body="&lt;p&gt;I have a brand new AMD Ryzen CPU and I would like to install Elementary OS, but it is stuck at boot screen...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When will Elementary OS be compatible ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using elementaryos-0.4.1-stable.20170517&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the error I get when I try to boot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jfgmF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jfgmF.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;It looks like kernel 4.9 ( this is the kernel packed with 0.4.1 ) does not have Ryzen support... only in kernels 4.11 and up have this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution now?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It looks like , kernel 4.9 ( this is the kernel packed with 0.4.1 ) have no Ryzen support.. only in 4.11 and up have this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution now ?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This is the error when i try t boot  .&lt;a href=&quot;https://i.stack.imgur.com/jfgmF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jfgmF.jpg&quot; alt=&quot;boot error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10106" LastEditorUserId="16827" LastEditDate="2019-10-22T05:34:22.767" LastActivityDate="2019-10-22T05:34:22.767" Title="Amd CPU ryzen supported?" Tags="|release-loki|amd|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="12336" PostTypeId="1" CreationDate="2017-06-09T20:17:08.087" Score="0" ViewCount="1106" Body="&lt;p&gt;I just completed the installation of Elementary OS on my desktop dell XPS 8920.&#xA;During the installation I noticed that the graph was a little bad, but I thought that after the installation it could hit some driver problem. However, after installation the system will not charge, a flashing dot will appear on the screen.&#xA;Searching a little more, I realized that this problem occurs in the new ubuntu, and it seems to me that there was no effort by the ubuntu community to solve this problem in the new version of the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My video card is a NVIDIA GFORCE 1050TI 4GB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone suggest a solution? Or at least elementary developers can solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&lt;/p&gt;&#xA;" OwnerUserId="10112" LastEditorUserId="10112" LastEditDate="2017-06-13T19:03:14.040" LastActivityDate="2019-01-05T21:00:55.347" Title="Elementary OS does not work with NVIDIA (SOLVED)" Tags="|nvidia|user-interface|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12339" PostTypeId="2" ParentId="12326" CreationDate="2017-06-10T07:11:24.057" Score="1" Body="&lt;p&gt;Probably not as elementary is based on ubuntu lts. if you upgrade the ubuntu side you might break your elementary. I might try it on another drive, just to see what happens...:-)&lt;/p&gt;&#xA;" OwnerUserId="10117" LastActivityDate="2017-06-10T07:11:24.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12341" PostTypeId="1" AcceptedAnswerId="12383" CreationDate="2017-06-10T09:47:14.807" Score="0" ViewCount="490" Body="&lt;p&gt;I recently noticed that the time displayed in the wingpanel is roughly one minute behind the system time, as shown in the screenshot below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FHmom.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FHmom.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The system time is NTP synchronized, and my OS is &lt;code&gt;elementary OS 0.4.1 Loki&lt;/code&gt;. I also checked that the BIOS time (shown with &lt;code&gt;hwclock --show&lt;/code&gt;) is correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone noticed a similar problem and knows how to synchronize the wingpanel clock with the system time?&lt;/p&gt;&#xA;" OwnerUserId="10120" LastActivityDate="2017-06-13T11:04:18.197" Title="Wingpanel clock is out of sync with system time" Tags="|wingpanel|time|clock|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12342" PostTypeId="1" AcceptedAnswerId="12344" CreationDate="2017-06-10T13:36:36.517" Score="1" ViewCount="2814" Body="&lt;p&gt;I'm on elementaryOS 0.4.1 Loki with an SSD as my boot drive, so I have very fast booting. However, whenever I log in, it takes an agonizing 60 seconds for wingpanel to appear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my Xorg log. What should I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://hastebin.com/orapodijup.hs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hastebin.com/orapodijup.hs&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8357" LastActivityDate="2017-06-10T15:10:56.573" Title="Login slow even though booting is fast" Tags="|release-loki|wingpanel|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12343" PostTypeId="2" ParentId="12330" CreationDate="2017-06-10T14:51:46.350" Score="1" Body="&lt;p&gt;As a &lt;strong&gt;workaround&lt;/strong&gt;, you might want to try to install 4.11 from the Ubuntu mainline kernels. &#xA;You can download and install from &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&lt;/a&gt; the following packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install linux-headers-4.11.4-041104_4.11.4-041104.201706071003_all.deb \&#xA;linux-headers-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb \&#xA;linux-image-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-06-10T14:51:46.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12344" PostTypeId="2" ParentId="12342" CreationDate="2017-06-10T15:10:56.573" Score="7" Body="&lt;p&gt;There is already a bug report for this problem, see &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;noreferrer&quot;&gt;Bug #1596377&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As suggested in the &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377/comments/22&quot; rel=&quot;noreferrer&quot;&gt;comments&lt;/a&gt;, the following workaround seems to fix the problem for some users:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me, no delayed startup for the last couple of days (before it was ~2min after every boot).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&#xA;Probably a duplicate of question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10726/delay-to-start-elementary-os-0-4-loki-64-bit&quot;&gt;10726&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10120" LastActivityDate="2017-06-10T15:10:56.573" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12345" PostTypeId="1" CreationDate="2017-06-10T15:33:47.643" Score="0" ViewCount="441" Body="&lt;p&gt;I am unable to use the app store. After a recent update, it says that I must be connected to the internet, when I am. The only thing I can think of that might be causing this issue is that I have 3 NIC's in my machine due to using VM's. Can anyone please assist?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gTaUI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gTaUI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2920" LastActivityDate="2017-11-11T13:23:55.730" Title="Elementary OS App Store - No Network" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ClosedDate="2017-11-11T19:32:53.637" ContentLicense="CC BY-SA 3.0" />
  <row Id="12346" PostTypeId="2" ParentId="12251" CreationDate="2017-06-10T17:51:21.113" Score="1" Body="&lt;p&gt;When it freezes up, try to get to the terminal: &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt;. If it works, have a look at the following logs, &lt;code&gt;/var/log/lightdm/lightdm.log&lt;/code&gt; and &lt;code&gt;/var/log/syslog&lt;/code&gt;. Also, try restarting lightdm service:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Those are not the only logs to check, but it's a good start. You can either try to reproduce the problem or check the logs by date, in case you still remember the last it happened. Let me know if you need help. &lt;/p&gt;&#xA;" OwnerUserId="10124" LastEditorUserId="16827" LastEditDate="2019-05-03T19:59:58.653" LastActivityDate="2019-05-03T19:59:58.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12348" PostTypeId="2" ParentId="12316" CreationDate="2017-06-10T21:09:57.850" Score="1" Body="&lt;p&gt;first I'd suggest upgrading the driver to Nvidia 381. it works better for me (xps 9560). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;when I'm running in Nvidia driver the Intel HD card behaves perfectly.&#xA; I usually switch Nvidia card off and use Intel HD solely, unless I'm goin to play games. didn't see much difference in battery life though, it still suck&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-10T21:09:57.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12349" PostTypeId="2" ParentId="11426" CreationDate="2017-06-11T08:24:03.390" Score="1" Body="&lt;p&gt;I had the same issue but on Debian 8... assuming that your skypeforlinux repo is setup in &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/etc/apt/sources.list.d/skype-stable.list&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Use the following to fix it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -s apt-transport-https &amp;gt; /dev/null || bash -c &quot;sudo apt-get update; sudo apt-get install apt-transport-https -y&quot; &#xA;curl https://repo.skype.com/data/SKYPE-GPG-KEY | sudo apt-key add - &#xA;echo &quot;deb [arch=amd64] https://repo.skype.com/deb stable main&quot; | sudo tee /etc/apt/sources.list.d/skype-stable.list &#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should then be able to install skypeforlinux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this help resolve your issue.&lt;/p&gt;&#xA;" OwnerUserId="10127" LastActivityDate="2017-06-11T08:24:03.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12351" PostTypeId="2" ParentId="12341" CreationDate="2017-06-11T12:25:21.700" Score="0" Body="&lt;p&gt;Strangely, this seems to be related to the slow login problem with Loki, e.g. mentioned in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10726/delay-to-start-elementary-os-0-4-loki-64-bit&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After applying the same fix as proposed in a &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377/comments/22&quot; rel=&quot;nofollow noreferrer&quot;&gt;comment&lt;/a&gt; of the official &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug report&lt;/a&gt;, the wingpanel clock is now again in sync with the system time:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I will update this answer if the problem occurs again. &lt;/p&gt;&#xA;" OwnerUserId="10120" LastActivityDate="2017-06-11T12:25:21.700" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12353" PostTypeId="1" CreationDate="2017-06-11T13:43:42.270" Score="1" ViewCount="168" Body="&lt;p&gt;I Just donwload the elementary iso (the latest), flashed on a Usb with rufus, and try to install on my MacBook pro from 2008. It has a intel 2.4ghz Core 2 duo, GeForce 8600 gt and 4 gb ram. Aparently everything should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have manage to load the grub screen, with a good resolution and working good. I have try all the options. Try, install año OEM and the result os everytime the same: a blank screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think, it may be an issue with the vídeo drivers but i don't know how to fix it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks you for the support!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eduardo &lt;/p&gt;&#xA;" OwnerUserId="1224" LastActivityDate="2018-08-05T11:02:02.903" Title="I have an issue installing Loki on a MacBook pro from 2008" Tags="|grub|drivers|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12354" PostTypeId="1" CreationDate="2017-06-11T15:59:56.710" Score="0" ViewCount="3182" Body="&lt;p&gt;I am using elementary os 0.4.1 Loki, can anyone let me know how to install Thunderbird?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: Thunderbird not showing in app center.&lt;/p&gt;&#xA;" OwnerUserId="10126" LastActivityDate="2017-06-12T16:53:17.460" Title="how to install thunderbird in Elementary os 0.4.1 (Loki)?" Tags="|system-installation|thunderbird|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12355" PostTypeId="2" ParentId="12354" CreationDate="2017-06-11T16:45:10.030" Score="1" Body="&lt;p&gt;It's weird. Thunderbird is showing for me in AppCenter. But if you want to install it manually, open a terminal and type the following commands. You will have to type your password when requested:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y software-properties-common&#xA;sudo add-apt-repository ppa:mozillateam/thunderbird-stable &#xA;sudo apt-get update&#xA;sudo apt-get install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2767" LastEditDate="2017-06-11T16:53:33.583" LastActivityDate="2017-06-11T16:53:33.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12357" PostTypeId="1" CreationDate="2017-06-12T00:18:39.673" Score="1" ViewCount="120" Body="&lt;p&gt;This question has been asked before, but went unanswered once, and was closed once for being apparently off-topic. So opening this again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed alacarte and deleted a duplicate entry for Xtreme Download Manager. Since then, the launcher crashes and restarts when I type to search an app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to undo this change? I tried reinstalling wingpanel but didn't seem to help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way I can gather logs and post here for help? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks! &lt;/p&gt;&#xA;" OwnerUserId="9954" LastActivityDate="2017-06-12T00:18:39.673" Title="Slingshot crashes when I type to search" Tags="|wingpanel|slingshot|crash|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12359" PostTypeId="2" ParentId="11558" CreationDate="2017-06-12T00:25:09.760" Score="0" Body="&lt;p&gt;Run the following command and test -&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -o 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can test with 0,1,2,3 and see which one gives correct output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then add the command to your startup.&lt;/p&gt;&#xA;" OwnerUserId="10129" LastEditorUserId="578" LastEditDate="2017-06-12T12:28:18.860" LastActivityDate="2017-06-12T12:28:18.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12361" PostTypeId="1" AcceptedAnswerId="13743" CreationDate="2017-06-12T09:40:14.757" Score="0" ViewCount="737" Body="&lt;p&gt;I'm Using elementary OS 0.4.1 Loki , in which the Bleachbit 1.12 with root privilege option is not working at all. &lt;strong&gt;App's icon just pops on the Plank Dock and Closes itself after some time. Nothing happens.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using terminal by typing sudo bleachbit but this is what get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ABCD@xxxx:~$ sudo bleachbit&#xA;[sudo] password for xxxxxxxx: *********************             &#xA;&#xA;(bleachbit:5756): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(bleachbit:5756): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(bleachbit:5756): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(bleachbit:5756): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this bleachbit without root option window opens and that is running smoothly. &#xA;This auto update option says that im in root privilege as in the picture. But options in Bleachbit are as same as normal not as root. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/fi3A7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fi3A7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;P.S I've also tried Bleachbit Beta 1.17 -------&gt; SAME RESULT&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="10134" LastEditorUserId="686" LastEditDate="2017-06-12T16:50:36.003" LastActivityDate="2020-01-03T12:36:01.870" Title="Bleachbit with Root Privilege not Working on LOKI 0.4.1 - Need assistance. Please" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12363" PostTypeId="2" ParentId="9161" CreationDate="2017-06-12T12:27:19.580" Score="0" Body="&lt;p&gt;Try to use the workaround in this link&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11993/empty-desktop-after-installing-4-1-version/12015#12015&quot;&gt;Empty desktop after installing 4.1 version&lt;/a&gt;&#xA;The symptoms are not exactly the same but its possible that the root cause is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also can you post a logs somewhere, it would be helpful&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-12T12:27:19.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12364" PostTypeId="2" ParentId="11558" CreationDate="2017-06-12T13:12:05.300" Score="0" Body="&lt;p&gt;Try to set orientation lock in dconf settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.peripherals.touchscreen orientation-lock true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should block screen orientation in the user session, but I'm not sure about Greeter (Pantheon's LightDM Login Screen).&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2017-06-12T13:12:05.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12365" PostTypeId="2" ParentId="11828" CreationDate="2017-06-12T14:18:13.217" Score="1" Body="&lt;p&gt;You can delete Epiphany webapps completely from the browser, in the &lt;code&gt;about:applications&lt;/code&gt; page. They also create a browser profile directory in &lt;code&gt;~/.config/epiphany&lt;/code&gt; in addition to the .desktop file, if you have manually removed the .desktop files take also a second to remove the profile dir.&lt;/p&gt;&#xA;" OwnerUserId="10137" LastEditorUserId="10137" LastEditDate="2017-06-12T15:10:31.503" LastActivityDate="2017-06-12T15:10:31.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12366" PostTypeId="2" ParentId="8676" CreationDate="2017-06-12T16:39:20.677" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Did the trick for me.&lt;/p&gt;&#xA;" OwnerUserId="10138" LastEditorUserId="578" LastEditDate="2017-06-12T16:48:01.330" LastActivityDate="2017-06-12T16:48:01.330" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12367" PostTypeId="2" ParentId="12354" CreationDate="2017-06-12T16:53:17.460" Score="1" Body="&lt;p&gt;You don't need to add a PPA, even if it does not show in the &lt;em&gt;AppCenter&lt;/em&gt; you can  install it via the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-06-12T16:53:17.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12368" PostTypeId="1" CreationDate="2017-06-12T18:34:03.583" Score="1" ViewCount="562" Body="&lt;p&gt;This started happening after the OS update today.    &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ 1518.424042] ath: phy0: Unable to reset channel, reset status -22&#xA;[ 1518.434738] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff&#xA;[ 1518.596434] ath: phy0: Chip reset failed&#xA;[ 1518.596441] ath: phy0: Unable to reset channel, reset status -22&#xA;[ 1518.607044] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff&#xA;[ 1518.768421] ath: phy0: Chip reset failed&#xA;[ 1518.768428] ath: phy0: Unable to reset channel, reset status -22&#xA;[ 1518.779197] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff&#xA;[ 1518.940637] ath: phy0: Chip reset failed&#xA;[ 1518.940643] ath: phy0: Unable to reset channel, reset status -22&#xA;[ 1518.951280] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff&#xA;[ 1519.112515] ath: phy0: Chip reset failed&#xA;[ 1519.112520] ath: phy0: Unable to reset channel, reset status -22&#xA;[ 1519.123068] ath: phy0: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff&#xA;[ 1519.283874] ath: phy0: Chip reset failed&#xA;[ 1519.283880] ath: phy0: Unable to reset channel, reset status -22&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is my network setup:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;03:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is my kernel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Linux dylan-X550LD 4.4.0-79-generic #100-Ubuntu SMP Wed May 17 19:58:14 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please help, it's annoying when your wifi keeps disconnecting and won't work until you shutdown and restart your laptop. A reboot doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my over all:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;                                     dylan@dylan-X550LD&#xA;         eeeeeeeeeeeeeeeee           OS: elementary OS 0.4.1 loki&#xA;      eeeeeeeeeeeeeeeeeeeeeee        Kernel: x86_64 Linux 4.4.0-79-generic&#xA;    eeeee  eeeeeeeeeeee   eeeee      Uptime: 8m&#xA;  eeee   eeeee       eee     eeee    Packages: 2982&#xA; eeee   eeee          eee     eeee   Shell: zsh 5.1.1&#xA;eee    eee            eee       eee  Resolution: 1366x768&#xA;eee   eee            eee        eee  WM: Mutter(Gala)&#xA;ee    eee           eeee       eeee  WM Theme: elementary&#xA;ee    eee         eeeee      eeeeee  CPU: Intel Core i5-4210U CPU @ 2.7GHz&#xA;ee    eee       eeeee      eeeee ee  GPU: GeForce 820M&#xA;eee   eeee   eeeeee      eeeee  eee  RAM: 1066MiB / 3835MiB&#xA;eee    eeeeeeeeee     eeeeee    eee &#xA; eeeeeeeeeeeeeeeeeeeeeeee    eeeee  &#xA;  eeeeeeee eeeeeeeeeeee      eeee   &#xA;    eeeee                 eeeee     &#xA;      eeeeeee         eeeeeee       &#xA;         eeeeeeeeeeeeeeeee          &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10140" LastActivityDate="2017-06-12T18:34:03.583" Title="Why does my wifi keep doing this?" Tags="|updates|wifi|networking|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12369" PostTypeId="1" AcceptedAnswerId="12378" CreationDate="2017-06-12T19:41:06.603" Score="4" ViewCount="2358" Body="&lt;p&gt;I want &lt;code&gt;Bluetooth&lt;/code&gt; disabled by default. How to do it in elementary os? I've already tried to disable it in settings. But there is no option for this. If I disable it on top bar and login and logout the Bluetooth is enabled.&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2019-01-08T17:12:53.653" Title="How to disable Bluetooth by default?" Tags="|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12370" PostTypeId="1" AcceptedAnswerId="12384" CreationDate="2017-06-12T20:46:41.537" Score="4" ViewCount="4672" Body="&lt;p&gt;I look into processes on my laptop. It is T420. There is one process in top five. It is packagekitd. &lt;code&gt;/usr/lib/packagekit/packagekitd&lt;/code&gt;. I don't understand why do I need packagekitd running?&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2017-06-13T11:09:23.477" Title="Why is packagekitd is running?" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12371" PostTypeId="1" CreationDate="2017-06-12T21:16:32.173" Score="0" ViewCount="48" Body="&lt;p&gt;I can't use it.&#xA;Today is my first day at Elementary OS.&#xA;thanks.&lt;/p&gt;&#xA;" OwnerUserId="10143" LastActivityDate="2019-01-04T12:02:00.660" Title="How to configure my VGN-CS320J multimedia keys?" Tags="|settings|keyboard|vaio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12372" PostTypeId="2" ParentId="11454" CreationDate="2017-06-12T21:23:35.723" Score="-1" Body="&lt;ol&gt;&#xA;&lt;li&gt;Sudo dpkg --configure -a&lt;/li&gt;&#xA;&lt;li&gt;Sudo apt-get update&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;li&gt;Open system settings&lt;/li&gt;&#xA;&lt;li&gt;Click about&lt;/li&gt;&#xA;&lt;li&gt;Check for update&lt;/li&gt;&#xA;&lt;li&gt;Reboot &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Done&lt;/p&gt;&#xA;" OwnerUserId="10145" LastActivityDate="2017-06-12T21:23:35.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12373" PostTypeId="2" ParentId="3917" CreationDate="2017-06-12T21:40:27.447" Score="0" Body="&lt;p&gt;You can install the additional hardware tool that ships by default in Ubuntu, and this will configure your system with the latest versions of the drivers you need at the click of a button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7587/loki-additional-hardware&quot;&gt;Loki, additional hardware&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10146" LastActivityDate="2017-06-12T21:40:27.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12374" PostTypeId="1" CreationDate="2017-06-12T22:06:49.367" Score="0" ViewCount="242" Body="&lt;p&gt;Alrighty, I have a serious super important mega critical issue; dear god someone help me. My video games don't work! Okay some do, if I install a game using Steam, they always work and run without a hitch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if I download and install a game, any game, through GOG, they do not work. The icon pops up but nothing happens and the game crashes. I am not sure what to do here as games do work through Steam. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the games I have tested:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Victor Vran &lt;/li&gt;&#xA;&lt;li&gt;Shadowrun Returns&lt;/li&gt;&#xA;&lt;li&gt;Hotline Miami 2&lt;/li&gt;&#xA;&lt;li&gt;Doorkickers&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My assumption is that it has to do with Elementary being 64-bit&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-09-19T07:16:06.947" Title="Games installed through GOG do not work, but Steam games do" Tags="|applications|games|64-bit|32-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12375" PostTypeId="1" AcceptedAnswerId="12377" CreationDate="2017-06-12T22:19:28.873" Score="2" ViewCount="3913" Body="&lt;p&gt;I want to test Flatpak on elementary OS. Since it is built on top of Ubuntu 16.04, it should be possible to install flatpack. Like in flatpack installing guide.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how to install Flatpak on Loki?&lt;/p&gt;&#xA;" OwnerUserId="287" LastEditorUserId="287" LastEditDate="2017-06-14T06:37:43.887" LastActivityDate="2017-06-14T06:37:43.887" Title="How to install Flatpak?" Tags="|ppa|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12376" PostTypeId="2" ParentId="12371" CreationDate="2017-06-12T22:19:44.953" Score="1" Body="&lt;p&gt;Alright, buckle up your big boy pants because you are going balls deep today!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We get to play with the terminal. Here is a list of commands that will set you up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:teejee2008/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now go ahead and use UKUU to update the kernel to 4.11.3&lt;/li&gt;&#xA;&lt;li&gt;It will say that there are errors the first time you try this, ignore&#xA;that.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer.&lt;/li&gt;&#xA;&lt;li&gt;Go back to UKUU and reinstall 4.11.3 kernel&lt;/li&gt;&#xA;&lt;li&gt;If the install was successful, go ahead and restart your computer&#xA;again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-toolchain-r/test&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gcc-6 g++-6&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now reboot your computer again for good measure.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;When you computer has restarted go ahead and run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Say yes to any prompts.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer and now try your multimedia keys and possibly&#xA;your video drivers.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have to do this for my laptop and desktop for it to fully function. The 4.11.3 kernel is really good and has not given me issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So yeah, it seems like a lot, but it is not. Have confidence!&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-06-12T22:19:44.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12377" PostTypeId="2" ParentId="12375" CreationDate="2017-06-12T23:20:38.170" Score="6" Body="&lt;p&gt;You're in the right track on installation of Flatpak on Elementary as indicated on &lt;a href=&quot;http://flatpak.org/getting.html&quot; rel=&quot;noreferrer&quot;&gt;their guide&lt;/a&gt;. You might not be aware of it, but &lt;code&gt;add-apt-repository&lt;/code&gt; is disabled by default on Elementary (to avoid reckless installation of PPAs). Workaround for that situation have been posted &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7507/how-can-i-add-a-ppa-in-loki&quot;&gt;multiple&lt;/a&gt; &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10775/fixed-unknown-solution-apt-get-and-add-apt-repository-not-working&quot;&gt;times&lt;/a&gt; on this site.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, you can enable it via:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, you can proceed to the usual Flatpak installation steps.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-06-12T23:20:38.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12378" PostTypeId="2" ParentId="12369" CreationDate="2017-06-13T00:53:32.060" Score="3" Body="&lt;p&gt;You can disable it by adding next line to &lt;code&gt;/etc/rc.local&lt;/code&gt; file with following system restart:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill block bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10068" LastEditorUserId="16827" LastEditDate="2019-01-08T17:12:53.653" LastActivityDate="2019-01-08T17:12:53.653" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12379" PostTypeId="2" ParentId="12328" CreationDate="2017-06-13T01:00:42.000" Score="0" Body="&lt;p&gt;You should be good with USB-C adapter like this:&#xA;&lt;a href=&quot;http://www.dell.com/en-us/shop/dell-adapter-usb-c-to-hdmi/apd/470-abmz/display-solutions&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.dell.com/en-us/shop/dell-adapter-usb-c-to-hdmi/apd/470-abmz/display-solutions&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10068" LastActivityDate="2017-06-13T01:00:42.000" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12380" PostTypeId="2" ParentId="12255" CreationDate="2017-06-13T01:11:25.330" Score="1" Body="&lt;p&gt;Disable pressure reveal, hide delay 200, unhide delay 0 and autohide is ggod for me, thanks for pressure reveal tip.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not that much sure why is it not saving your settings permanently&lt;/p&gt;&#xA;" OwnerUserId="10068" LastActivityDate="2017-06-13T01:11:25.330" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12381" PostTypeId="2" ParentId="2894" CreationDate="2017-06-13T07:13:34.520" Score="0" Body="&lt;p&gt;I had this problem. In my experience, it was because I chose advanced partitioning and then made my partitions how I wanted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you forget to create an EFI system partition (about 100Mb is needed), then it appears not to install the bootloader and the bios has no knowledge of Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution was to re-install and ensure to create an EFI system partition, and after install, set &quot;ubuntu&quot; as the preferred boot device in my bios. Grub then gives me the option of either Elementary or Windows at startup.&lt;/p&gt;&#xA;" OwnerUserId="10146" LastActivityDate="2017-06-13T07:13:34.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12382" PostTypeId="2" ParentId="11029" CreationDate="2017-06-13T09:10:47.747" Score="0" Body="&lt;p&gt;I faced this issue after installing three Drivers using the new AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;intel-microcode v3.20151106.1&lt;/li&gt;&#xA;&lt;li&gt;nvidia-340 v340.102&lt;/li&gt;&#xA;&lt;li&gt;nvidia-304 v304.135&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And resolved it by &lt;strong&gt;removing the nvidia-304&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have GeForce 8600 and the old package causes problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FShoR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FShoR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;(uninstall the selected item)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As for the long lag beween login and desktop, I have this issue for half a year already, seems like it does not correlate with the mouse issue...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a bug &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1697640&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1697640&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10150" LastEditorUserId="10150" LastEditDate="2017-06-13T09:25:34.517" LastActivityDate="2017-06-13T09:25:34.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12383" PostTypeId="2" ParentId="12341" CreationDate="2017-06-13T11:04:18.197" Score="1" Body="&lt;p&gt;There was a known bug in the indicator that caused the time to be up to 1 minute out of sync with the system time, especially when sleeping and resuming the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read more information about the issue and how it was fixed here if you're interested:&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-datetime/pull/17&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-datetime/pull/17&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Code has been pushed to resolve the issue, but that update hasn't been pushed out to users yet. The next time the indicator is updated, the problem will be resolved.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-06-13T11:04:18.197" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12384" PostTypeId="2" ParentId="12370" CreationDate="2017-06-13T11:09:23.477" Score="6" Body="&lt;p&gt;Packagekitd is responsible for handling package operations (installation, uninstallation, updating, etc...) for AppCenter. It runs in the background so it can check for updates and await commands to perform actions via AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a command called &lt;code&gt;pkmon&lt;/code&gt; that will show you what actions packagekitd is performing in the background if you wanted to check.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-06-13T11:09:23.477" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12385" PostTypeId="2" ParentId="12325" CreationDate="2017-06-13T11:15:18.397" Score="1" Body="&lt;p&gt;This functionality is coming! It will only be tracking the most popular apps submitted to AppCenter by third party developers rather than the ones inherited from the Ubuntu repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see a screenshot of this feature in action from Daniel Foré's G+ post here:&#xA;&lt;a href=&quot;https://plus.google.com/+DanielFor%C3%A9/posts/WUuyVvDo8ve&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://plus.google.com/+DanielForé/posts/WUuyVvDo8ve&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The hope is that there will be a good enough variety of applications submitted to AppCenter so that the Non-curated Ubuntu applications no longer need to be used as much.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-06-13T11:15:18.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12386" PostTypeId="1" CreationDate="2017-06-13T11:54:22.117" Score="2" ViewCount="12526" Body="&lt;p&gt;I can't read my digital newspaper on my pc because it needs Adobe Flash to open it. I am using Elementary Loki with Google Chrome. I have tried several things from several forums which didn't work and they were all for Ubuntu and other distros or for Firefox, also I am a beginner but I have learned several useful commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried the following unsuccessfully:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Tried finding Canonical Partners in AppCenter, but couldn't find any.&lt;/li&gt;&#xA;&lt;li&gt;Tried to find support for Chrome, only found for Firefox and nothing worked.&lt;/li&gt;&#xA;&lt;li&gt;Tried &lt;code&gt;sudo apt-get install adobe-flashplugin&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Tried downloading &lt;code&gt;flash.tar.gz&lt;/code&gt; and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;tar -xvf flash.tar.gz&#xA;if ! [ -d /usr/lib/adobe-flashplugin/ ]; then&#xA;  sudo mkdir /usr/lib/adobe-flashplugin ;&#xA;else&#xA;  echo /usr/lib/adobe-flashplugin/ already exists ;&#xA;fi&#xA;sudo cp -f libflashplayer.so /usr/lib/adobe-flashplugin/&#xA;sudo ln -sf /usr/lib/adobe-flashplugin/libflashplayer.so /usr/lib/flashplugin-installer/libflashplayer.so &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and got an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp: cannot stat 'libflashplayer.so': No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;elementary OS 0.4.1 Loki (64-bit)&lt;br&gt;&#xA;Processor: Quad-Core Intel® Core™ i5-4200U CPU @ 1.60GHz&lt;br&gt;&#xA;Memory: 3,9 GB&lt;br&gt;&#xA;Graphics: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)&lt;/p&gt;&#xA;" OwnerUserId="10151" LastEditorUserId="578" LastEditDate="2017-11-11T16:40:50.140" LastActivityDate="2020-01-02T18:30:04.493" Title="How to get Adobe Flash Player on elementary OS 0.4.1 Loki (64-bit) with Google Chrome" Tags="|release-loki|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12387" PostTypeId="2" ParentId="12386" CreationDate="2017-06-13T12:44:58.533" Score="-1" Body="&lt;p&gt;Getting flash to work reliably on new versions of Chrome can be a bit of a pain in Linux. I've had mixed results. But this might get you started:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure you have pepperflash (Chromes flash alternative) installed on your system&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Within Synaptic search on pepperflash and check the box then install it&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go &lt;a href=&quot;https://support.google.com/chrome/answer/6258784?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for the Google Chrome support with instructions on how to enable flash within Chrome&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-06-13T12:44:58.533" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12388" PostTypeId="1" CreationDate="2017-06-13T14:31:02.997" Score="1" ViewCount="2295" Body="&lt;p&gt;I'm running elementary OS on a 2011 Macbook pro. I'm quite pleased with the overall experience but the trackpad feel is quite a disappointment (too sensitive, not precise, issues with selection/drag&amp;amp;drop/scrolling etc.). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: is there an ideal configuration to make it work in a satisfying way? Which driver behaves best? I heard there's synaptics, libinput, mtrack... but I'm no expert.&lt;/p&gt;&#xA;" OwnerUserId="55" LastActivityDate="2019-12-04T01:35:52.143" Title="Macbook trackpad driver" Tags="|touchpad|drivers|macbook|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12389" PostTypeId="1" CreationDate="2017-06-13T15:11:42.340" Score="2" ViewCount="5248" Body="&lt;p&gt;When I shutdown via terminal or by clicking the button, it just shows a hyphen on the top left corner is stuck there forever. I manually have to interrupt with the key and shut it down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using Dell XPS 15 9560&lt;/p&gt;&#xA;" OwnerUserId="7426" LastActivityDate="2018-02-14T12:14:25.780" Title="Elementary OS does not shutdown correctly" Tags="|release-loki|shutdown|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12391" PostTypeId="2" ParentId="12389" CreationDate="2017-06-13T15:52:10.480" Score="0" Body="&lt;p&gt;I answered a similar question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11202/loki-takes-long-time-to-shut-down&quot;&gt;here&lt;/a&gt;. It could be a service is getting hung and can't shutdown properly. This fix adjusts the timeout for hung services. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-06-13T15:52:10.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12392" PostTypeId="2" ParentId="1548" CreationDate="2017-06-13T16:34:40.780" Score="0" Body="&lt;p&gt;Turning Off &lt;code&gt;USB 3.0 legacy mode&lt;/code&gt; or &lt;code&gt;usb3.0 configuration in pre-os&lt;/code&gt; in BIOS should work.&lt;/p&gt;&#xA;" OwnerUserId="10155" LastActivityDate="2017-06-13T16:34:40.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12393" PostTypeId="1" CreationDate="2017-06-13T17:27:01.353" Score="1" ViewCount="1079" Body="&lt;p&gt;Succeeded in joining Elementary OS installation to our Windows domain via active directory.  Used winbind, Samba, etc.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem:  The login screen only allows for the initially defined user (defined during installation), or a guest session.  How would one go about entering the domain login?&lt;/p&gt;&#xA;" OwnerUserId="10158" LastActivityDate="2019-10-24T19:02:17.093" Title="Need Logon screen for entering domain Logins" Tags="|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12394" PostTypeId="2" ParentId="12336" CreationDate="2017-06-13T19:00:37.963" Score="1" Body="&lt;p&gt;I solved the problem by downloading the video driver on my windows, I went into ubuntu recovery mode and installed the driver via USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No other tutorial worked, because the commands did not work because of dependencies!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="10112" LastActivityDate="2017-06-13T19:00:37.963" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12395" PostTypeId="2" ParentId="12330" CreationDate="2017-06-13T19:34:56.257" Score="0" Body="&lt;p&gt;Alright, buckle up your big boy pants because you are going balls deep today!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We get to play with the terminal. This guide is made assuming that you can get to the terminal [(edit) and the Desktop GUI.] Here is a list of commands that will set you up and upgrade your kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:teejee2008/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now go ahead and use UKUU to update the kernel to 4.11.3&lt;/li&gt;&#xA;&lt;li&gt;It will say that there are errors the first time you try this, ignore&#xA;that.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer.&lt;/li&gt;&#xA;&lt;li&gt;Go back to UKUU and reinstall 4.11.3 kernel&lt;/li&gt;&#xA;&lt;li&gt;If the install was successful, go ahead and restart your computer&#xA;again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only have access to the terminal use this advice given from Lemonslice&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a &lt;strong&gt;workaround&lt;/strong&gt;, you might want to try to install 4.11 from the Ubuntu mainline kernels. &#xA;You can download and install from &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&lt;/a&gt; the following packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install linux-headers-4.11.4-041104_4.11.4-041104.201706071003_all.deb \&#xA;linux-headers-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb \&#xA;linux-image-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now restart your computer when your kernel is installed and continue on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-toolchain-r/test&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gcc-6 g++-6&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now reboot your computer again for good measure.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;When you computer has restarted go ahead and run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Say yes to any prompts.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer and now try your multimedia keys and possibly&#xA;your video drivers.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have to do this for my laptop and desktop for it to fully function. The 4.11.3 kernel is really good and has not given me issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So yeah, it seems like a lot, but it is not. Have confidence!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: realized I made the assumption you could also get to the desktop to use the GUI. The answer from Lemonslice is the way to go. I believe it takes care of a nice chunk of legwork. I added it to my answer.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-06-13T20:19:39.887" LastActivityDate="2017-06-13T20:19:39.887" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12396" PostTypeId="1" AcceptedAnswerId="13861" CreationDate="2017-06-13T19:57:44.167" Score="0" ViewCount="405" Body="&lt;p&gt;So, I've been trying to install Elementary OS Freya for a while now and realised I needed the 32 Bit version because Mac Minis have a 32 bit limitation for kernels. But when I tried the USB method, the mac mini wouldn't boot into the USB. So I followed the next steps, to use a disc; only thing is, it wouldn't boot with the disc burnt with the iso.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: When trying to use the disc, it would get stuck on a white screen... Had to force reboot.&lt;/p&gt;&#xA;" OwnerUserId="10159" LastActivityDate="2019-01-02T15:00:40.153" Title="Unable to boot Elementary OS on Mac Mini- Freya 32 Bit" Tags="|release-freya|boot|usb-drive|dvd|32-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12397" PostTypeId="1" CreationDate="2017-06-13T22:06:33.553" Score="0" ViewCount="504" Body="&lt;p&gt;The touchpad seems to be working fine, except for the left or right key. When I click on them, the shutdown/reboot/sleep etc menu pops up and on clicking any key from the keyboard, the laptop simply shuts down. If I connect any external USB mouse or keyboard, it works perfectly fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how I can install the onboard keyboard correctly?&#xA;There's another question on the thread facing the same issue but the answer doesn't point out how exactly to solve the issue.&lt;/p&gt;&#xA;" OwnerUserId="10160" LastEditorUserId="10161" LastEditDate="2017-06-13T22:19:55.550" LastActivityDate="2019-05-07T16:03:30.660" Title="When I install ubuntu or elementary OS, my laptop (Asus E200HA) keyboard does not work. But it works perfectly fine when I install Lubuntu" Tags="|keyboard|suspend|asus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12398" PostTypeId="1" AcceptedAnswerId="12518" CreationDate="2017-06-14T03:33:47.480" Score="1" ViewCount="134" Body="&lt;p&gt;I've been using the back-tick (&quot;`&quot; left of the number 1 ) as my shortcut for the Guake drop down terminal.&#xA;I've set it for Guake from Guake's preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I've installed another terminal, Tilix. &#xA;I want to make the back-tick the drop down shortcut for it.&#xA;I could not find find this option from Tilix preferenes.&#xA;So I went to &quot;System Settings&quot; -&gt; &quot;Keyboard&quot; -&gt; &quot;Shortcuts&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turns out that trying to associate the back-tick character with any command, does not work and instead it's Disabled&lt;/p&gt;&#xA;" OwnerUserId="5067" LastActivityDate="2017-06-25T07:15:46.077" Title="Can't use the back-tick as keyboard shortcut" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12399" PostTypeId="1" AcceptedAnswerId="12400" CreationDate="2017-06-14T03:49:07.467" Score="0" ViewCount="3657" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZnJGi.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZnJGi.jpg&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dont know what exactly caused this, i guess it was the &quot;sudo apt-get autoremove&quot;? I just cant find my sound setting in system settings.&lt;/p&gt;&#xA;" OwnerUserId="10131" LastActivityDate="2020-04-10T21:39:28.540" Title="No sound setting in System settings" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12400" PostTypeId="2" ParentId="12399" CreationDate="2017-06-14T06:26:58.110" Score="3" Body="&lt;p&gt;You can (re)install the plugin with the following command (in a terminal window):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-gcc-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-06-14T06:26:58.110" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12402" PostTypeId="2" ParentId="11896" CreationDate="2017-06-14T14:51:12.617" Score="1" Body="&lt;p&gt;Try this,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F2&lt;/kbd&gt; to switch to a console mode&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo prime-select intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;F7&lt;/kbd&gt; to switch to graphics mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter password try to login, and it will show you login screen again, type you password again and voila&lt;/p&gt;&#xA;" OwnerUserId="10165" LastEditorUserId="686" LastEditDate="2017-06-15T20:46:05.307" LastActivityDate="2017-06-15T20:46:05.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12403" PostTypeId="2" ParentId="12319" CreationDate="2017-06-14T14:55:40.607" Score="-1" Body="&lt;p&gt;If someone still have this problem - simply delete this file: pantheon-filechooser-module.sh in /etc/profile.d/ and reboot&lt;/p&gt;&#xA;" OwnerUserId="10166" LastActivityDate="2017-06-14T14:55:40.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12404" PostTypeId="1" CreationDate="2017-06-15T01:11:40.100" Score="4" ViewCount="7765" Body="&lt;p&gt;I successfully installed Loki on my new laptop that initially came Windows 10 preinstalled, and was capable of connecting to wireless internet. Because I already own a Windows machine, I decided to clean install Elementary OS. The USB installation went well, except that I can't seem to find a way to connect to internet wirelessly; for the records, there's no wifi icon in the toolbar, and no options to explore wireless network options. I browsed the online forums and other documentation, but with no luck. Could it the be the question of drives? But again, wouldn't those be installed with Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop used to install Elementary OS is a rather modest device that I intend to use as a learning Linux machine: Intel Atom Quad Core Processor, 2GB RAM, 32GB Flash Storage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for your time to read my question and your help.&lt;/p&gt;&#xA;" OwnerUserId="10170" LastEditorUserId="10173" LastEditDate="2017-06-28T05:35:47.177" LastActivityDate="2019-05-02T05:56:01.973" Title="Wireless Internet Connection - Loki new (clean) install" Tags="|release-loki|system-installation|wifi|internet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12405" PostTypeId="2" ParentId="12397" CreationDate="2017-06-15T07:49:36.430" Score="1" Body="&lt;p&gt;I had the issue when I installed Loki 0.4.1. (I was eagerly hoping for the SD  card to be fixed) but I faced the same issue on my Asus E200HA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So reverted back to 0.4.0. this release doesn't have this issue (pressing a button on the on-board keyboard and going to sleep). Maybe this could help you as well?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only things I didn't get working was the SD card reader and audio. The rest was pretty stable. &lt;/p&gt;&#xA;" OwnerUserId="10044" LastActivityDate="2017-06-15T07:49:36.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12406" PostTypeId="1" CreationDate="2017-06-15T11:08:12.713" Score="2" ViewCount="389" Body="&lt;p&gt;I am looking for a way to disable system shortcut: &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Backquote&lt;/kbd&gt; (upper tab) at my ElementaryOS Loki. It is using through IntellIJ IDEA to enable version control panel. I would like to use default IDEA shortcut because I get used to it. Do you have any idea how to disable it?&lt;/p&gt;&#xA;" OwnerUserId="9161" LastEditorUserId="9161" LastEditDate="2017-06-15T18:30:29.930" LastActivityDate="2017-09-02T15:19:57.793" Title="Alt + Backquote shortcut" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12407" PostTypeId="1" CreationDate="2017-06-15T11:37:02.313" Score="1" ViewCount="1353" Body="&lt;p&gt;First, bluetooth device search didn't find my speaker, so I followed &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12027/bluetooth-manager-requests-use-of-pin-to-pair-headphones-elementaryos/12041?noredirect=1#comment15329_12041&quot;&gt;this&lt;/a&gt; post. Using &lt;code&gt;bluetoothctl&lt;/code&gt; I could pair, connect, and trust my speaker and clicking on the bluetooth icon shows my speaker, however it still doesn't show up in device search.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After connecting via &lt;code&gt;bluetoothctl&lt;/code&gt; it worked at first, but when I connect now either via the bluetooth icon or the command line it says it is connected, but it isn't really, since the speaker doesn't appear in sound settings and the audio continues to be played over my laptop speakers. It disconnects and connects regularly. The output is the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo bluetoothctl -a&#xA;[NEW] Controller 34:DE:1A:4D:1F:8D loki [default]&#xA;[NEW] Device 00:E0:4C:43:F2:51 SoundCore mini&#xA;Agent registered&#xA;[bluetooth]# connect 00:E0:4C:43:F2:51&#xA;Attempting to connect to 00:E0:4C:43:F2:51&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: yes&#xA;Connection successful&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: no&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: yes&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: no&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: yes&#xA;[CHG] Device 00:E0:4C:43:F2:51 Connected: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and so on.. I followed the instructions in &lt;a href=&quot;https://unix.stackexchange.com/questions/258074/error-when-trying-to-connect-to-bluetooth-speaker-org-bluez-error-failed&quot;&gt;this&lt;/a&gt; post as well, but &lt;code&gt;pulseaudio-module-bluetooth&lt;/code&gt; is installed and killing and restarting pulseaudio didn't solve the problem. module-bluetooth-discover is loaded:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pactl list short | grep blue&#xA;8   module-bluetooth-policy     &#xA;9   module-bluetooth-discover       &#xA;10  module-bluez5-discover&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Trying to load the module results in the following error, but I guess that's irrelevant, since it's loaded already:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo pactl load-module module-bluetooth-discover&#xA;Home directory not accessible: Permission denied&#xA;Connection failure: Connection refused&#xA;pa_context_connect() failed: Connection refused&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does anyone have an idea why it first worked and then not anymore? Could it have anything to do with the fact that after it first worked I connected my phone to the speaker? It isn't connected anymore, of course. Thanks for any help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, I just tried to connect another bluetooth speaker and it worked, with the speaker showing up in device search as well. I don't think that there is any problem with the other speaker though, I've never had problems connecting to it with different phones or windows computers.&lt;/p&gt;&#xA;" OwnerUserId="10152" LastEditorUserId="10152" LastEditDate="2017-06-15T11:49:09.820" LastActivityDate="2020-04-05T13:27:19.647" Title="Problems connecting to blutooth speaker" Tags="|release-loki|bluetooth|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12410" PostTypeId="1" CreationDate="2017-06-15T14:52:26.920" Score="1" ViewCount="514" Body="&lt;p&gt;Im using LOKI . The music app doesn't shows ALBUM ART like it was shown in the Main page. How to resolve this. Please help. Thanks in advance.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3buji.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3buji.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10134" LastActivityDate="2017-10-28T20:09:28.640" Title="Album art can't be seen in Music Application?" Tags="|release-loki|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12411" PostTypeId="2" ParentId="12308" CreationDate="2017-06-15T17:45:09.937" Score="1" Body="&lt;p&gt;It's fixed now. Problably an update... &lt;/p&gt;&#xA;" OwnerDisplayName="user9985" LastActivityDate="2017-06-15T17:45:09.937" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12412" PostTypeId="2" ParentId="12406" CreationDate="2017-06-15T18:33:09.697" Score="2" Body="&lt;p&gt;I've found solution for enabling shortcuts in IntellIJ Idea. You have to execute this commands in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings begin-move &quot;[]&quot;&#xA;gsettings set org.gnome.desktop.wm.keybindings switch-group &quot;['&amp;lt;Super&amp;gt;Above_Tab']&quot;&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9161" LastActivityDate="2017-06-15T18:33:09.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12413" PostTypeId="1" CreationDate="2017-06-15T22:51:44.503" Score="0" ViewCount="1011" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l9Nsg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l9Nsg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;I entered the following code with the respective outputs &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    rfkill list all&#xA;&#xA;0: ideapad_wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: yes&#xA;1: ideapad_bluetooth: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: yes&#xA;2: hci0: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&#xA;3: phy0: Wireless LAN&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&#xA;&#xA;sudo lshw -class network&#xA;&#xA;  *-network               &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: enp2s0&#xA;       version: 15&#xA;       serial: a8:1e:84:65:91:a9&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.19 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s&#xA;       resources: irq:125 ioport:e000(size=256) memory:d1104000-d1104fff memory:d1100000-d1103fff&#xA;  *-network DISABLED&#xA;       description: Wireless interface&#xA;       product: Intel Corporation&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: wlp3s0&#xA;       version: 99&#xA;       serial: 98:54:1b:f3:a6:56&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=4.8.0-52-generic firmware=22.391740.0 latency=0 link=no multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:128 memory:d1000000-d1001fff&#xA;&#xA;sudo ifconfig wlp3s0 up&#xA;&#xA;SIOCSIFFLAGS: Operation not possible due to RF-kill&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am aware that another user experienced a similar &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10288/how-to-enable-wifi-in-elementary-os-loki&quot;&gt;problem&lt;/a&gt;, whereby the solution was to download drivers - or at least, that's what I understood. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see the wifi tab but it won't allow me to activate it, the same applies for the bluetooth. I believe it's the wireless card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The wifi does work on windows (dualboot). It's an intel card but I'm not sure of anything further.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I figure out what the drivers are called / referred to and how do I go about installing them? If there's another solution I'd greatly appreciate it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you kindly in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I have added in a screen shot of the wireless tab. I can toggle the button on this screen but not from the home screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/G08r4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/G08r4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10182" LastEditorUserId="10182" LastEditDate="2017-06-16T14:22:37.940" LastActivityDate="2017-06-17T19:57:36.143" Title="Wireless not connecting Lenovo v510 - How to download drivers?" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12414" PostTypeId="1" CreationDate="2017-06-16T08:16:00.903" Score="2" ViewCount="1951" Body="&lt;p&gt;I forgot to check for home folder encryption at the time of installation.? So is there any safe way to do that.&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="10134" LastActivityDate="2017-09-17T09:06:58.120" Title="How to encrypt home folder after installing ElementryOS Loki" Tags="|release-loki|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12415" PostTypeId="2" ParentId="12404" CreationDate="2017-06-16T10:00:12.320" Score="1" Body="&lt;p&gt;I'm assuming for what you said, you are learning Linux, so I'm going to explain briefly every command. But consider Reading the &lt;code&gt;man [command]&lt;/code&gt; pages of every command before using it.&lt;/p&gt;&#xA;&lt;p&gt;I'm assuming that your daemon is not working, but just for make sure, check out you BIOS network configuration, maybe the Wireless antenna is turned off.&lt;/p&gt;&#xA;&lt;p&gt;You installed a new eOS so I'm sure you didn't touch the root user, so first we need to configurate that, now open a terminal type &lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; and write this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo passwd root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then enter the password you want, note that root is the god user that can do literally everything in you Linux machine... we need to log in the root user for managing the daemons without problems, I don't recommend using &lt;code&gt;sudo&lt;/code&gt; with your user even if is admin because it really doesn't have all the privileges of a root user at all. So for loggin into the root user just type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ su root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and enter the password you already typed.&lt;br&gt;&#xA;Now we need to reconfigurate the &lt;code&gt;networkmanager.service&lt;/code&gt; so for that...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# systemctl disable NetworkManager.service&#xA;# systemctl enable NetworkManager.service&#xA;# systemctl restart NetworkManager.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So with that done we basically restarted the &lt;a href=&quot;https://wiki.archlinux.org/index.php/Systemd&quot; rel=&quot;nofollow noreferrer&quot;&gt;service&lt;/a&gt;, now type &lt;code&gt;exit&lt;/code&gt; and reboot your computer. Note the &lt;code&gt;#&lt;/code&gt; that means that you are using the root user and not the standard user reprecented by &lt;code&gt;$&lt;/code&gt; this thing is used in most of Linux webpages so keep an eye for that.&lt;/p&gt;&#xA;&lt;p&gt;Now finally if for some reason, you aren't watching the tray wifi icon, enter the terminal again and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ nmcli dev wifi connect &amp;quot;NAME_OF_YOUR_WIFI&amp;quot; password &amp;quot;type_password&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And yes write even the &lt;code&gt;&amp;quot;&lt;/code&gt; this method is used because in bash (Linux console) when you enter &lt;kbd&gt;SPACE&lt;/kbd&gt; means you are using a command or parameter(this is called pipeline, not sure). When using the &lt;code&gt;&amp;quot;&lt;/code&gt; you are telling the console that you will enter a string and evaluate if it is exactly the same coincidence (string = word/sentence).&lt;br&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now you're done, if for some weird reason you are still unable to use the wireless, let me know, please don't use the root user for common things like installing programs, the root user is only for manipulating other &lt;a href=&quot;https://wiki.archlinux.org/index.php/Users_and_groups&quot; rel=&quot;nofollow noreferrer&quot;&gt;users&lt;/a&gt; and special kernel configurations such as daemons and hooks.&lt;/p&gt;&#xA;&lt;p&gt;You can learn more about &lt;code&gt;Networkmanager&lt;/code&gt; commands &lt;a href=&quot;https://wiki.archlinux.org/index.php/NetworkManager#nmcli&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Another method is using the &lt;code&gt;iw&lt;/code&gt; network program, so for installing it...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install iw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;but is probably you have that already installed, so first we need to know the name of your Wireless card, for that type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;iw dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;the output will show you something like &lt;code&gt;wlan0&lt;/code&gt; use the same name of that for the next command... now finally for connecting to the internet type and hit &lt;kbd&gt;ENTER&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;iw dev wlan0 connect &amp;quot;name_of_wifi&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;the screen will turn blue and will ask you for the password, that's all I know for fixing that kind of problems, hope this will work.&lt;/p&gt;&#xA;&lt;h2&gt;UPDATE&lt;br&gt;&lt;/h2&gt;&#xA;&lt;p&gt;I think Windows is spoiling your BIOS, I can't explain why but my friends done this...&lt;br&gt;&#xA;Enter a terminal, and type &lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;&lt;br&gt;&#xA;and add this piece of code &lt;code&gt;acpi_osi=Linux&lt;/code&gt;, where it says : &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; &lt;br&gt;&#xA;so it will turn into &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash acpi_osi=Linux&amp;quot;&lt;/code&gt;&lt;br&gt;&#xA;that parameter tells grub to take full control of the computer hardware when there are others OS in the hard disk.&lt;br&gt;&#xA;Exit and save changes to the file with &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt;&lt;br&gt; and update the grub with &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;GRUB is a boot loader package that supports multiple operating systems on a computer, it handles hard stuff with the kernel, we don't want to know ;)&lt;br&gt;&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-10-01T16:50:14.603" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="12417" PostTypeId="1" AcceptedAnswerId="12455" CreationDate="2017-06-16T13:34:50.687" Score="0" ViewCount="217" Body="&lt;p&gt;Today I received a notice stating that older versions of Skype (4.3 and older) will not longer work after July 1st. So I installed the latest Beta 5.3.0.1 version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem with this is that the Skype icon will not go away from Plank. The icon shows correctly in the top bar, so I don't see why it won't go away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to force the icon to not show in Plank?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2017-06-20T06:38:20.440" Title="Hide new Skype icon from Plank" Tags="|release-loki|skype|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12418" PostTypeId="2" ParentId="10048" CreationDate="2017-06-16T13:47:21.367" Score="3" Body="&lt;p&gt;I use 2-Step Verification for all my Google stuff. The way I got around this was to set an App password for Calendar. The option is under 2-Step Verification on the &lt;a href=&quot;https://myaccount.google.com/security&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://myaccount.google.com/security&lt;/a&gt; page.&lt;/p&gt;&#xA;" OwnerUserId="10188" LastActivityDate="2017-06-16T13:47:21.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12419" PostTypeId="1" AcceptedAnswerId="12420" CreationDate="2017-06-16T23:26:10.667" Score="1" ViewCount="540" Body="&lt;p&gt;I haven't done anything weird I don't think. Haven't changed any of my sources or anything like that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying an &lt;code&gt;apt update&lt;/code&gt; I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[~] ∞ sudo apt update&#xA;Hit:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Hit:3 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease                                                 &#xA;Hit:5 http://ppa.launchpad.net/peek-developers/stable/ubuntu xenial InRelease                                                   &#xA;Hit:6 http://gb.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                            &#xA;Hit:7 http://ppa.launchpad.net/team-xbmc/ppa/ubuntu xenial InRelease                                                            &#xA;Get:2 http://gb.archive.ubuntu.com/ubuntu xenial InRelease [247 kB]                                                             &#xA;Hit:8 http://security.ubuntu.com/ubuntu xenial-security InRelease                                                               &#xA;Get:4 http://gb.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]                                                     &#xA;Get:9 http://packages.elementary.io/appcenter xenial InRelease [4,840 B]                                                  &#xA;Hit:10 https://dl.yarnpkg.com/debian stable InRelease                                                 &#xA;Ign:11 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 Packages               &#xA;Hit:12 http://repository.spotify.com stable InRelease                               &#xA;Ign:13 http://gb.archive.ubuntu.com/ubuntu xenial/main i386 Packages&#xA;Ign:14 http://gb.archive.ubuntu.com/ubuntu xenial/main Translation-en&#xA;Hit:15 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Err:15 http://gb.archive.ubuntu.com/ubuntu xenial/main amd64 DEP-11 Metadata                                  &#xA;  Hash Sum mismatch&#xA;Get:16 http://gb.archive.ubuntu.com/ubuntu xenial/main DEP-11 64x64 Icons [409 kB]                            &#xA;Get:17 http://gb.archive.ubuntu.com/ubuntu xenial/restricted amd64 Packages [8,344 B]   &#xA;Get:18 http://gb.archive.ubuntu.com/ubuntu xenial/restricted i386 Packages [8,684 B]   &#xA;Get:19 http://gb.archive.ubuntu.com/ubuntu xenial/restricted Translation-en [2,908 B]  &#xA;Get:20 http://gb.archive.ubuntu.com/ubuntu xenial/restricted amd64 DEP-11 Metadata [186 B]   &#xA;Get:21 http://packages.elementary.io/appcenter xenial/main amd64 DEP-11 Metadata [6,508 B]&#xA;Hit:22 https://deb.nodesource.com/node_8.x xenial InRelease     &#xA;Hit:23 https://cli-assets.heroku.com/branches/stable/apt ./ InRelease&#xA;Get:24 http://gb.archive.ubuntu.com/ubuntu xenial/universe amd64 Packages [7,532 kB]&#xA;Get:25 http://gb.archive.ubuntu.com/ubuntu xenial/universe i386 Packages [7,512 kB]&#xA;Ign:26 http://gb.archive.ubuntu.com/ubuntu xenial/universe Translation-en&#xA;Get:27 http://gb.archive.ubuntu.com/ubuntu xenial/universe amd64 DEP-11 Metadata [3,410 kB]&#xA;Get:28 http://gb.archive.ubuntu.com/ubuntu xenial/universe DEP-11 64x64 Icons [7,448 kB]&#xA;Get:29 http://gb.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [558 kB]&#xA;Get:30 http://gb.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [541 kB]&#xA;Get:31 http://gb.archive.ubuntu.com/ubuntu xenial-updates/main Translation-en [226 kB]&#xA;Get:32 http://gb.archive.ubuntu.com/ubuntu xenial-updates/main amd64 DEP-11 Metadata [299 kB]&#xA;Get:33 http://gb.archive.ubuntu.com/ubuntu xenial-updates/main DEP-11 64x64 Icons [199 kB]&#xA;Get:34 http://gb.archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 Packages [7,772 B]&#xA;Get:35 http://gb.archive.ubuntu.com/ubuntu xenial-updates/restricted i386 Packages [7,772 B]&#xA;Get:36 http://gb.archive.ubuntu.com/ubuntu xenial-updates/restricted Translation-en [2,548 B]&#xA;Hit:37 http://gb.archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 DEP-11 Metadata&#xA;Get:38 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [486 kB]&#xA;Get:39 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [470 kB]&#xA;Ign:40 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en&#xA;Get:41 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 DEP-11 Metadata [163 kB]&#xA;Get:42 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe DEP-11 64x64 Icons [208 kB]&#xA;Get:43 http://gb.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 Packages [8,932 B]&#xA;Get:44 http://gb.archive.ubuntu.com/ubuntu xenial-updates/multiverse i386 Packages [7,992 B]&#xA;Get:45 http://gb.archive.ubuntu.com/ubuntu xenial-updates/multiverse Translation-en [4,460 B]&#xA;Get:46 http://gb.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 DEP-11 Metadata [2,516 B]&#xA;Get:47 http://gb.archive.ubuntu.com/ubuntu xenial-updates/multiverse DEP-11 64x64 Icons [7,765 B]&#xA;Ign:40 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en&#xA;Get:40 http://gb.archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en [257 kB]&#xA;Err:37 http://gb.archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 DEP-11 Metadata&#xA;  Hash Sum mismatch&#xA;Hit:48 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease&#xA;Fetched 617 kB in 3s (158 kB/s)&#xA;&#xA;** (appstreamcli:7929): WARNING **: No origin found for file ppa.launchpad.net_elementary-os_stable_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz&#xA;&#xA;** (appstreamcli:7929): WARNING **: No origin found for file repository.spotify.com_dists_stable_non-free_dep11_Components-amd64.yml.gz&#xA;&#xA;** (appstreamcli:7929): WARNING **: No origin found for file gb.archive.ubuntu.com_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz&#xA;&#xA;** (appstreamcli:7929): WARNING **: No origin found for file gb.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz&#xA;AppStream system cache was updated, but problems were found: Metadata files have errors: /var/lib/app-info/yaml/gb.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/gb.archive.ubuntu.com_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/repository.spotify.com_dists_stable_non-free_dep11_Components-amd64.yml.gz, /var/lib/app-info/yaml/ppa.launchpad.net_elementary-os_stable_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz&#xA;Reading package lists... Error!&#xA;E: Failed to fetch store:/var/lib/apt/lists/partial/gb.archive.ubuntu.com_ubuntu_dists_xenial_main_dep11_Components-amd64.yml.gz  Hash Sum mismatch&#xA;E: Failed to fetch store:/var/lib/apt/lists/partial/gb.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz  Hash Sum mismatch&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;E: Problem executing scripts APT::Update::Post-Invoke-Success 'if /usr/bin/test -w /var/cache/app-info -a -e /usr/bin/appstreamcli; then appstreamcli refresh-cache &amp;gt; /dev/null; fi'&#xA;E: Sub-process returned an error code&#xA;E: Encountered a section with no Package: header&#xA;E: Problem with MergeList /var/lib/apt/lists/gb.archive.ubuntu.com_ubuntu_dists_xenial_main_binary-amd64_Packages&#xA;E: The package lists or status file could not be parsed or opened.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9861" LastActivityDate="2017-06-16T23:51:38.233" Title="`apt update` is broken and appcenter doesn't show any apps" Tags="|apt|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12420" PostTypeId="2" ParentId="12419" CreationDate="2017-06-16T23:51:38.233" Score="2" Body="&lt;p&gt;Turns out &lt;code&gt;gb.archive.ubuntu.com&lt;/code&gt; was returning weird html instead of gz files. Replacing &lt;code&gt;{gb.archive.ubuntu.com}&lt;/code&gt; to &lt;code&gt;{archive.ubuntu.com}&lt;/code&gt; fixed this for now.&lt;/p&gt;&#xA;" OwnerUserId="9861" LastActivityDate="2017-06-16T23:51:38.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12421" PostTypeId="2" ParentId="10578" CreationDate="2017-06-17T04:57:39.200" Score="1" Body="&lt;p&gt;I also got this problem after I installed Nvidia driver. Un-install it, thing backs to normal. &lt;/p&gt;&#xA;" OwnerUserId="10193" LastActivityDate="2017-06-17T04:57:39.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12423" PostTypeId="1" CreationDate="2017-06-17T15:24:37.177" Score="0" ViewCount="117" Body="&lt;p&gt;I installed Elementary OS yesterday as the first Linux in my life, so I'm total newbie here. I have a small problem with my touchpad. After I open my laptop and log in I have to wait some time because I can't move a pointer. It reacts if I click or tap it, but doesn't move for some time. Could you please help me with that?&lt;br&gt; Also I'd like to add some gestures in addition to two-finger scrolling, but I suppose it will be another question.&lt;/p&gt;&#xA;" OwnerUserId="10197" LastActivityDate="2023-12-15T05:03:45.430" Title="Asus K501UX Touchpad starts working with 30 seconds delay after sleep mode" Tags="|touchpad|laptop|asus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12424" PostTypeId="2" ParentId="3917" CreationDate="2017-06-17T15:59:14.117" Score="0" Body="&lt;p&gt;In Elementary OS 4.1, there is a AppCenter app.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the AppCenter, there is a &quot;&lt;strong&gt;Nvidia X Server Settings&lt;/strong&gt;&quot; app. Install that and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After rebooting, there will be a &lt;strong&gt;driver update in the AppCenter for &quot;nvidia-375&quot;&lt;/strong&gt;.  At time of writing, nvidia-375 is the latest long term driver.  Install nvidia-375 and reboot.  The computer will be using the proprietary Nvidia driver now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Prior to this, you could see that the nouveau driver was being used via terminal: &lt;code&gt;lshw -c video | grep 'configuration'&lt;/code&gt; which shows &lt;code&gt;driver=nouveau latency=0&lt;/code&gt;. After updating, it will show &lt;code&gt;driver=nvidia latency=0&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7659" LastActivityDate="2017-06-17T15:59:14.117" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12425" PostTypeId="2" ParentId="12423" CreationDate="2017-06-17T18:43:50.700" Score="0" Body="&lt;p&gt;I don't remember how to check what your touchpad model is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have an elantouchpad, which ASUS uses frequently, you will have this problem. I spent 2 days trying ways to fix it without luck. You will need to get a mouse, there just are not Ubuntu drivers for that model touchpad that effectively work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I assume that is the problem you are running into here.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-06-17T18:43:50.700" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12426" PostTypeId="2" ParentId="12413" CreationDate="2017-06-17T19:57:36.143" Score="1" Body="&lt;p&gt;We blacklisted &lt;code&gt;ideapad_laptop&lt;/code&gt; in &lt;code&gt;/etc/modprobe.d/blacklist.conf&lt;/code&gt; and it worked. Kinda just kept throwing stones at the OS until something happened but the logic was that lenovo's drivers were layered between the OS and hardware interface (as far as I understand it), thus we removed them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop is functionally perfectly now - loving this OS!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SIDE NOTE : I was told by a friend who had a similar issue that he had to reinstall Elementary OS and change some secure boot settings - but this was not attempted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks @Renato A. for the input! You were right about all drivers being present.&lt;/p&gt;&#xA;" OwnerUserId="10182" LastActivityDate="2017-06-17T19:57:36.143" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12427" PostTypeId="2" ParentId="10299" CreationDate="2017-06-17T20:57:53.047" Score="-1" Body="&lt;p&gt;I had the same issue. Now it's fixed.&#xA;It disappeared when I disabled a 2nd display (indeed there wasn't any, but it was activated by default).&lt;/p&gt;&#xA;" OwnerUserId="10198" LastActivityDate="2017-06-17T20:57:53.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12429" PostTypeId="1" CreationDate="2017-06-18T07:50:29.213" Score="2" ViewCount="1661" Body="&lt;p&gt;Im using Loki and there are times that i cant simply able to use &lt;strong&gt;&lt;em&gt;Ctrl+X | Ctrl+V | Ctrl+C&lt;/em&gt;&lt;/strong&gt; shortcuts they were simply not working. It works only after i completely restart the whole system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please Help.&lt;/p&gt;&#xA;" OwnerUserId="10134" LastEditorUserId="10134" LastEditDate="2017-06-18T07:56:12.183" LastActivityDate="2024-03-22T18:05:11.253" Title="Cut, Copy &amp; Paste shortcuts were not working" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12430" PostTypeId="1" AcceptedAnswerId="12439" CreationDate="2017-06-18T07:53:25.100" Score="1" ViewCount="678" Body="&lt;p&gt;I just did system update on Loki from AppCenter. But after restarting, the shell (Pantheon?) loads really, really slow. It was fast before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here my syslog, maybe it helps:  &lt;a href=&quot;https://pastebin.com/UQKYeCeh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/UQKYeCeh&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope someone can help since I don't have any idea what's causing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!﻿&lt;/p&gt;&#xA;" OwnerUserId="10203" LastActivityDate="2018-02-08T14:27:29.870" Title="Pantheon Shell Loading So Slow" Tags="|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12434" PostTypeId="1" AcceptedAnswerId="12435" CreationDate="2017-06-18T16:28:17.063" Score="0" ViewCount="98" Body="&lt;p&gt;I wish there was a way to drag and drop menu items to different categories and right click the items to edit the name/icons. I don't think this has been added yet. Are there any other GUI tools that can do this easily?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm looking for an easy way to move an item from one category to another.&lt;/p&gt;&#xA;" OwnerUserId="10184" LastActivityDate="2017-06-18T19:40:09.770" Title="Slingshot - Move / Edit items" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12435" PostTypeId="2" ParentId="12434" CreationDate="2017-06-18T19:40:09.770" Score="0" Body="&lt;p&gt;I recommend Menulibre '&lt;a href=&quot;https://smdavis.us/projects/menulibre/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://smdavis.us/projects/menulibre/&lt;/a&gt;' It's simple GUI to add applications to slingshot and/or change names, icons etc.&#xA;It's really easy to use. You can easily change categories, names and descriptions of apps. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you want to keep simple. Make a .desktop entry in '/usr/share/applications'. '&lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_entries&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Desktop_entries&lt;/a&gt;'&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-06-18T19:40:09.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12436" PostTypeId="2" ParentId="12429" CreationDate="2017-06-18T22:53:44.723" Score="0" Body="&lt;p&gt;Hi i had same problems too after a little search i solved. To solve the problem you have to move English up from the options--&gt;keyboard&lt;/p&gt;&#xA;" OwnerUserId="10207" LastActivityDate="2017-06-18T22:53:44.723" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12439" PostTypeId="2" ParentId="12430" CreationDate="2017-06-19T04:10:22.187" Score="5" Body="&lt;p&gt;I think you are running into a known issue, that many of us encountered already.&#xA;Please run this command from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;let me know if it helps&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-19T04:10:22.187" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12440" PostTypeId="2" ParentId="12389" CreationDate="2017-06-19T05:43:44.977" Score="2" Body="&lt;p&gt;I have the same laptop&#xA;the problem is with Nvidia driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;you need to install &quot;additional drivers&quot; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;sudo apt install ubuntu-drivers-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Or you can open AppCenter and install &quot;additional drivers&quot; from there.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;I'm not sure that the package is called exactly that but you can look it up for the exact name&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after everything is installed&#xA;open additional drivers app and select Nvidia 381 driver&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that should fix your issues&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="8520" LastEditDate="2017-06-19T07:09:11.773" LastActivityDate="2017-06-19T07:09:11.773" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12441" PostTypeId="2" ParentId="12414" CreationDate="2017-06-19T06:31:22.033" Score="3" Body="&lt;p&gt;First, install &lt;code&gt;sudo apt-get install ecryptfs-utils cryptsetup&lt;/code&gt;. You'll need to encrypt your home folder while you are logged out,  so u need to change account-it has to be account with sudo privileges.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Login to the other account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run &lt;code&gt;sudo ecryptfs-migrate-home -u user&lt;/code&gt; and replace &lt;em&gt;user&lt;/em&gt; with name of your account (the one that you want to encrypt).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ta-da! Your home folder is encrypted. Afterwards:&#xA;1.Login to your encrypted account immediately. (Do not reboot before that!)&#xA;2. Click *Run this action * to create passphrase&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In installation process system encrypts also your swap partition, so to encrypt it use &lt;code&gt;sudo ecryptfs-setup-swap&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's everything. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-06-19T06:31:22.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12444" PostTypeId="2" ParentId="12019" CreationDate="2017-06-19T11:21:09.893" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;You need to make sure that you have your USB defined as booting device prior to HDD.&#xA;I don't know which PC model you're running, so it might vary, but the idea is the same.&lt;/li&gt;&#xA;&lt;li&gt;You need to disable secure boot in bios&lt;/li&gt;&#xA;&lt;li&gt;If you are running RAID you need to change it to AHCI in the bios&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;let me know whats your pc model&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also &lt;a href=&quot;https://help.ubuntu.com/community/UEFI#Converting_Ubuntu_into_EFI_or_Legacy_mode&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; might help you to understand the whole process&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-19T11:21:09.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12445" PostTypeId="2" ParentId="11345" CreationDate="2017-06-19T11:41:25.273" Score="0" Body="&lt;p&gt;These instructions here worked for me: &lt;a href=&quot;https://askubuntu.com/questions/40723/how-do-i-install-citrix-receiver&quot;&gt;https://askubuntu.com/questions/40723/how-do-i-install-citrix-receiver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4169" LastEditorUserId="4169" LastEditDate="2017-06-20T10:46:46.343" LastActivityDate="2017-06-20T10:46:46.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12446" PostTypeId="2" ParentId="10787" CreationDate="2017-06-19T15:16:30.737" Score="0" Body="&lt;p&gt;You may try to repair the grub using this link:&#xA;&lt;a href=&quot;http://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps you.&lt;/p&gt;&#xA;" OwnerUserId="10215" LastActivityDate="2017-06-19T15:16:30.737" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12447" PostTypeId="2" ParentId="12019" CreationDate="2017-06-19T15:21:12.673" Score="-1" Body="&lt;p&gt;Try using universal usb installer for making a bootable usb:&#xA;&lt;a href=&quot;https://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10215" LastActivityDate="2017-06-19T15:21:12.673" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12448" PostTypeId="1" CreationDate="2017-06-19T16:10:53.930" Score="0" ViewCount="97" Body="&lt;p&gt;After clicking full installation of Elementary os on new DOS Laptop, the logo of elementary os appeared​, and it's 4hrs and it is still there, nothing is happening.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9YWX8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9YWX8.jpg&quot; alt=&quot;Here is the image &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10218" LastActivityDate="2018-12-12T23:00:16.870" Title="Problem during installation" Tags="|elementary-website|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12449" PostTypeId="1" AcceptedAnswerId="12483" CreationDate="2017-06-19T18:29:00.840" Score="0" ViewCount="8326" Body="&lt;p&gt;As soon as I inserted my USB card it was simple plug and play. So, when I connected to my AP both card (internal and USB) would connect to it. My access point will show two devices connected to it (both the names point to my laptop).&#xA;So when I tried to disable my internal card, I used the following steps:&lt;p&gt;&#xA;Add the following line to /etc/network/interfaces:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;iface wlan0 inet manual&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We can replace wlan0 with the interface name that we want to disable. It worked there was no sign of my internal card. So when I again pluged my USB card the simple plug and play method won't work anymore. But when I enabled my internal USB card it started working again but same as earlier both card would connect to my AP. &lt;p&gt;&#xA;How can I disable my internal card and make use of my new USB card.&lt;/p&gt;&#xA;" OwnerUserId="10072" LastEditorUserId="10072" LastEditDate="2017-06-21T16:14:41.560" LastActivityDate="2017-06-21T18:30:35.103" Title="How to disable built-in wifi and use only USB wifi card?" Tags="|networking|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12450" PostTypeId="2" ParentId="7833" CreationDate="2017-06-19T19:26:33.337" Score="0" Body="&lt;p&gt;Go to system-setting&gt;online-accounts and add your e-mail adress accounts. Allow System and Correio options. Open the mail again and check if works.&lt;/p&gt;&#xA;" OwnerUserId="10221" LastActivityDate="2017-06-19T19:26:33.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12452" PostTypeId="1" CreationDate="2017-06-19T23:41:43.780" Score="2" ViewCount="1046" Body="&lt;p&gt;I installed elementaryos-0.4.1-stable.20170517.iso several times on my intel/nvidia laptop the first time i did the install i could enter numbers on my numpad. After doing a clean install, now on boot numlock is OFF by default no matter what state i leave it in before i shut it down. I tried adding  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;greeter-setup-script=/usr/bin/numlockx on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/lightdm/lightdm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which led to not being able to boot so then using &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;c&lt;/kbd&gt; at boot and recovery mode removed it back to normal, i saw older posts on this forum that you could just open &lt;code&gt;settings-&amp;gt;keyboard&lt;/code&gt; but i believe that was relevant for a version 2 yrs ago. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am up to date to latest version as of this post &lt;/p&gt;&#xA;" OwnerUserId="10223" LastEditorUserId="8272" LastEditDate="2017-06-20T19:18:44.493" LastActivityDate="2024-02-29T23:07:51.060" Title="getting NumLock to be on by default on start login screen (SOLVED)" Tags="|release-loki|greeter|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12453" PostTypeId="1" CreationDate="2017-06-20T05:44:22.293" Score="1" ViewCount="648" Body="&lt;p&gt;So I'm quite new to Linux, I wanted to try it because windows crapware is starting to annoy me. So today I've tried installing both Ubuntu and elementary os and they both freeze on the first unlock after I install the os. Am I just supposed to keep waiting for something to happen or what? Am I doing something wrong? I disabled fast and secure boot in the BIOS. And I have no idea what else I'm supposed to do.&lt;/p&gt;&#xA;" OwnerUserId="10225" LastActivityDate="2018-05-16T13:19:12.890" Title="Freeze on login" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12454" PostTypeId="2" ParentId="12453" CreationDate="2017-06-20T06:08:01.213" Score="1" Body="&lt;p&gt;Nvm I fixed it by resetting my BIOS and disabling csm.&lt;/p&gt;&#xA;" OwnerUserId="10225" LastActivityDate="2017-06-20T06:08:01.213" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12455" PostTypeId="2" ParentId="12417" CreationDate="2017-06-20T06:38:20.440" Score="2" Body="&lt;p&gt;So you found the solution, but I'm giving you a better info for anyone that have this problem too, I though that the Skype app was a joke but no, it's really well done, even if it's in alpha state, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hfpuc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hfpuc.png&quot; alt=&quot;Skype 5 Aplha&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So for fixing the problem basically just select &lt;code&gt;Tools -&amp;gt; Close to tray&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8272" LastActivityDate="2017-06-20T06:38:20.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12457" PostTypeId="2" ParentId="12448" CreationDate="2017-06-20T10:02:13.747" Score="1" Body="&lt;p&gt;I have the same problem on a quite new machine (Asus UX410UA). After pressing Esc there is no bootlog. It's hanged. Other distros are booting normally. The most interresting thing is when loki 0.4.1 arrived I tried to boot it and it worked. Now it does not (I redownloaded it). Sha sums are correct, it's not corrupted. Liveusb was created by dd command. It is booting in virtualbox.&#xA;Nomodeset doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="7067" LastEditorUserId="7067" LastEditDate="2017-06-20T10:09:35.080" LastActivityDate="2017-06-20T10:09:35.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12460" PostTypeId="1" AcceptedAnswerId="12464" CreationDate="2017-06-20T12:37:53.583" Score="0" ViewCount="77" Body="&lt;p&gt;when I try to login, the process starts, but when only the background is shown, it gets stuck. nothing works, the plank and the wing-panel do not show and no matter what button I press, nothing happens. the only way to login again is to force restart the computer, but when I try to login again the same process occurs again and this can happen for many times over until it finally logs in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem has really been bugging me now and has become  &lt;em&gt;&lt;strong&gt;really&lt;/strong&gt;&lt;/em&gt;  annoying. is there anyway in which i can fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="9098" LastActivityDate="2017-06-20T16:53:28.450" Title="HUGE problem when trying to login!" Tags="|greeter|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:55:31.553" ContentLicense="CC BY-SA 3.0" />
  <row Id="12461" PostTypeId="2" ParentId="12054" CreationDate="2017-06-20T14:23:34.387" Score="0" Body="&lt;p&gt;If you are asking for the steps you can try this &lt;a href=&quot;https://null-byte.wonderhowto.com/how-to/install-kali-live-usb-drive-with-persistence-optional-0162253/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;. Works like a charm :)&lt;/p&gt;&#xA;" OwnerUserId="10072" LastActivityDate="2017-06-20T14:23:34.387" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12462" PostTypeId="1" AcceptedAnswerId="13720" CreationDate="2017-06-20T15:10:27.403" Score="1" ViewCount="860" Body="&lt;p&gt;Even though i add subtitle files (.srt) from external subtitles menu, the app won't display subtitles. How can I make the videos app display the subtitles?&lt;/p&gt;&#xA;" OwnerUserId="9585" LastActivityDate="2017-10-25T06:54:40.593" Title="Videos Won't Display Subtitles" Tags="|subtitles|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12464" PostTypeId="2" ParentId="12460" CreationDate="2017-06-20T16:53:28.450" Score="0" Body="&lt;p&gt;its a known bug, and actually if you wait for a few minutes (depends on the machine) it will start&lt;/p&gt;&#xA;&#xA;&lt;p&gt;however there's a workaround&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I described it in &lt;a href=&quot;https://elementaryos.stackexchange.com/a/12439/8520&quot;&gt;this answer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-20T16:53:28.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12467" PostTypeId="1" AcceptedAnswerId="12480" CreationDate="2017-06-20T21:02:06.067" Score="1" ViewCount="232" Body="&lt;p&gt;i want to know if its possible to filter by extension which files in a directory are shown. &#xA;in many file managers you can add for example *.jpg to the path.&#xA;that did not work for me and the documentation is non existent.&lt;/p&gt;&#xA;" OwnerUserId="2818" LastActivityDate="2017-06-21T15:47:03.377" Title="how to filter files by extension in pantheon-files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12470" PostTypeId="1" AcceptedAnswerId="12490" CreationDate="2017-06-21T02:55:11.890" Score="1" ViewCount="14661" Body="&lt;p&gt;I updated eOS and the AppCenter told me to restart. I had uninstalled some applications prior to running the update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I only get a black screen after the eOS logo splash screen during bootup. When I force shutdown using the power key, I see the eOS logo again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did I uninstall critical applications? I don't remember what I uninstalled. How can I fix this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if I select the following from the grub menu:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Advanced Options for elementary -&gt; linux kernel 4.4.0-81(recovery) -&gt; resume normal boot &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It boots up fine and I can login but the performance is sluggish. Everything lags. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help. &lt;/p&gt;&#xA;" OwnerUserId="10237" LastEditorUserId="10237" LastEditDate="2017-06-22T08:22:57.343" LastActivityDate="2017-06-22T08:22:57.343" Title="Black screen at boot [SOLVED]" Tags="|release-loki|boot|dual-boot|thinkpad|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12473" PostTypeId="2" ParentId="4041" CreationDate="2017-06-21T09:44:33.493" Score="0" Body="&lt;p&gt;I know the question is over a year old, but incase someone is still wondering; I managed to get a picture logon screen and plain coloured desktop on Loki like this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;in system settings/desktop select wallpaper; background and click on the coloured block in the bottom right corner.&lt;/li&gt;&#xA;&lt;li&gt;I selected the colour I wanted (customised colour). this should now appear as the desktop background.&lt;/li&gt;&#xA;&lt;li&gt;I then changed the &quot;background&quot; button (bottom left) to pictures and waited for my pictures folder to load my photos.&lt;/li&gt;&#xA;&lt;li&gt;Select a picture and DOUBLE click it, this will now appear as the desktop.&lt;/li&gt;&#xA;&lt;li&gt;Change the &quot;picture&quot; button back to &quot;background&quot; and if you scroll to the bottom you should find a picture which is just the colour selected in (2)&lt;/li&gt;&#xA;&lt;li&gt;click ONCE on this picture and the desktop will change to this colour.&lt;/li&gt;&#xA;&lt;li&gt;close system settings and logoff. You should now get your chosen picture on the logon screen and a plain coloured desktop when logged on.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hopefully these instructions will adapt if you want a different pictures on logon and desktop screen.&lt;/p&gt;&#xA;" OwnerDisplayName="user8328" LastActivityDate="2017-06-21T09:44:33.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12477" PostTypeId="1" CreationDate="2017-06-21T14:17:22.940" Score="0" ViewCount="204" Body="&lt;p&gt;I am able to assign an additional shortcut to zoom in and out using the &lt;code&gt;System Settings &amp;gt; Keyboard &amp;gt; Universal Access &amp;gt; Magnifier Zoom In/Out&lt;/code&gt; options, but regardless of what I set there, the shortcuts &lt;kbd&gt;Meta&lt;/kbd&gt;+&lt;kbd&gt;=&lt;/kbd&gt; and &lt;kbd&gt;Meta&lt;/kbd&gt;+&lt;kbd&gt;-&lt;/kbd&gt; still zoom in and out. &#xA;It's conflicting with a shortcut in another program.&lt;/p&gt;&#xA;" OwnerUserId="10244" LastEditorUserId="10244" LastEditDate="2017-06-22T16:08:12.163" LastActivityDate="2017-09-21T00:45:27.240" Title="Is it possible to completely disable Universal Access zoom shortcuts? [Solved]" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12478" PostTypeId="2" ParentId="12477" CreationDate="2017-06-21T15:04:18.937" Score="1" Body="&lt;p&gt;I discovered a workaround via &lt;a href=&quot;https://elementaryos.stackexchange.com/a/1818/10244&quot;&gt;this&lt;/a&gt; answer to a related question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, use &lt;code&gt;gsettings&lt;/code&gt; to find the internal configuration setting we wish to change:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep -i zoom&#xA;# ...&#xA;# org.pantheon.desktop.gala.keybindings zoom-out ['&amp;lt;Super&amp;gt;minus', '&amp;lt;Super&amp;gt;KP_Subtract']&#xA;# org.pantheon.desktop.gala.keybindings zoom-in ['&amp;lt;Super&amp;gt;plus', '&amp;lt;Super&amp;gt;KP_Add']&#xA;# ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, change the individual setting as necessary. In my case:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.keybindings zoom-out &quot;[]&quot;&#xA;gsettings set org.pantheon.desktop.gala.keybindings zoom-in &quot;[]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you should be able to use the built in elementaryOS settings for the shortcut you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems like this may be a bug in ElementaryOS. &lt;a href=&quot;https://github.com/elementary/switchboard-plug-keyboard/issues/31?_pjax=%23js-repo-pjax-container&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-keyboard/issues/31?_pjax=%23js-repo-pjax-container&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10244" LastEditorUserId="10244" LastEditDate="2017-06-21T17:00:49.643" LastActivityDate="2017-06-21T17:00:49.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12479" PostTypeId="2" ParentId="10627" CreationDate="2017-06-21T15:37:23.493" Score="1" Body="&lt;p&gt;I use elementaryOS on my work computer without any issues. For email I am using Thunderbird and simply connect to the Exchange server using imap, which works just fine right out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It gets better though if you add the Lightning plugin (for calendar) and the Exchange EWS Provider plugin. Thenb you can accept meeting requests and sync the calendar back to Exchange. LDAP also works for the company Exchange contacts. EWS isn't perfect, but stable enough for me. I do sometimes have an issue where I can not dismiss a reminder (this is very rare), but deleting the entry in the calendar will fix that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A couple of additional things you may want to consider are Enigmail for signing/encrypting mail, and clamdrib + clamd for virus scanning.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-21T15:37:23.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12480" PostTypeId="2" ParentId="12467" CreationDate="2017-06-21T15:47:03.377" Score="1" Body="&lt;p&gt;This is not possible at the moment, although it is something that could be implemented in future.  The only work-round is to sort by type, as indicated above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The intention is the elementaryos apps are simple enough to be self-documenting so if there is no obvious way of doing something it is probably not implemented!  Of course, at present, this ideal is not always reached ...&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-06-21T15:47:03.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12481" PostTypeId="2" ParentId="8675" CreationDate="2017-06-21T15:54:09.293" Score="0" Body="&lt;p&gt;I am not totally sure if this will work, but have you tried editing &lt;code&gt;/etc/apt/apt.conf.d/10periodic&lt;/code&gt; to disable the auto update of the package list?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went the other way and actually have my server upgrade over night (except the kernel, so no reboots) but that may not be what you want.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-21T15:54:09.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12482" PostTypeId="2" ParentId="7859" CreationDate="2017-06-21T16:00:04.493" Score="0" Body="&lt;p&gt;If your school Exchange server has imap enabled then you should be able to connect just fine - I have successfully connected Mail to Exchange at work.&#xA;In my case I needed SSL/TLS and a password for imap and STARTTLS + Use IMAP credentials for sending via SMTP.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-21T16:00:04.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12483" PostTypeId="2" ParentId="12449" CreationDate="2017-06-21T16:10:19.947" Score="0" Body="&lt;p&gt;We can simply blacklist the modules which we do not want to use.&lt;br&gt;&#xA;To blacklist the module of your wireless card :&lt;p&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1. sudo vi /etc/modprobe.d/blacklist.conf (If you can not find it you can create one).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2. Comment the module name with a # in the beginning of the line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#blacklist wlan0&lt;/code&gt;&lt;p&gt;&#xA;3. Save, run &lt;code&gt;sudo update-initramfs -u&lt;/code&gt; and reboot&lt;p&gt;&#xA;To remove a module manually without rebooting :&lt;p&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r wlan0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Looses effect after reboot.&lt;P&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To load the module again:&lt;p&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe wlan0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To check the modules were loaded or not :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lsmod&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found the answer from &lt;a href=&quot;https://askubuntu.com/questions/168032/how-to-disable-built-in-wifi-and-use-only-usb-wifi-card&quot;&gt;here&lt;/a&gt;. This worked for me, however if you have other problem regarding this you can check the link. It has tons of answer. &lt;/p&gt;&#xA;" OwnerUserId="10072" LastEditorUserId="10072" LastEditDate="2017-06-21T18:30:35.103" LastActivityDate="2017-06-21T18:30:35.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12484" PostTypeId="2" ParentId="3067" CreationDate="2017-06-21T16:19:15.587" Score="1" Body="&lt;p&gt;I use another method to mount my SMB shares. I have a script with a line like the following for each share:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gvfs-mount smb://&amp;lt;SERVER&amp;gt;/&amp;lt;SHARE&amp;gt; &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The commands are run in the background so any delays in mounting don't hold up other things. I then created a .desktop file to autostart the script at boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is particularly useful on my work laptop as the network does not come up until after I log in (security feature).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also unmount from within Files as with any manually mounted fs.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-21T16:19:15.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12485" PostTypeId="2" ParentId="11933" CreationDate="2017-06-21T16:38:13.597" Score="0" Body="&lt;p&gt;The Menu key is, by default, used as the compose key. So MENU+' e gives é in terminal or any other application. You can turn this off in System Settings -&gt; Keyboard -&gt; Options. But there does not seem to be an option then to bring up an actual menu with the button.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-21T16:38:13.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12488" PostTypeId="2" ParentId="6833" CreationDate="2017-06-22T02:22:44.110" Score="1" Body="&lt;p&gt;If you want a simple uninstall&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$~sudo apt-get remove 'application_name'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or you can use &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$~sudo apt-get purge 'application_name'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to uninstall the application and all relative files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems in your case like you changed the default application that reads .jpg files.&lt;br&gt;&#xA;Go to &gt; System Settings &gt; Applications &gt; Image Viewer &lt;br&gt;&#xA;And choose the default elementaryOS image viewer &lt;code&gt;Photo Viewer&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="9186" LastActivityDate="2017-06-22T02:22:44.110" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12489" PostTypeId="1" AcceptedAnswerId="12493" CreationDate="2017-06-22T06:44:11.850" Score="1" ViewCount="1457" Body="&lt;p&gt;I work with different machines and want to have one window of terminal split into two or three. To see at once what happens on different machines.&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2017-07-07T15:43:47.470" Title="How to make a terminal split view?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12490" PostTypeId="2" ParentId="12470" CreationDate="2017-06-22T08:22:27.787" Score="3" Body="&lt;p&gt;Everything works again! No need to reinstall!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I pressed &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt; to boot into tty1 and the $DISPLAY environment variable was empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So redefined the DISPLAY variable using &lt;code&gt;export DISPLAY=:0.0&lt;/code&gt; and rebooted. That's it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. IIRC, I may have uninstalled UXTerm before the running the update.&lt;/p&gt;&#xA;" OwnerUserId="10237" LastActivityDate="2017-06-22T08:22:27.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12491" PostTypeId="1" CreationDate="2017-06-22T11:49:55.130" Score="0" ViewCount="5318" Body="&lt;p&gt;I bought a brand new monitor and yet elementary won't recognize it. I'm planning to go back to Windows 8 but I need to partition the harddrive before doing so. What are the steps towards doing this so I can have a successful installation of Windows 8?&lt;/p&gt;&#xA;" OwnerUserId="10256" LastEditorUserId="6398" LastEditDate="2017-07-12T13:17:47.700" LastActivityDate="2017-07-12T13:17:47.700" Title="How do you Partition On Elementary to Install Windows?" Tags="|microsoft-windows|disk-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12492" PostTypeId="2" ParentId="12491" CreationDate="2017-06-22T14:33:06.453" Score="0" Body="&lt;p&gt;It gets a little more complicated because of grub. I would recommend you follow the instructions in the link below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/133533/how-to-remove-ubuntu-and-put-windows-back-on&quot;&gt;https://askubuntu.com/questions/133533/how-to-remove-ubuntu-and-put-windows-back-on&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-06-22T14:33:06.453" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12493" PostTypeId="2" ParentId="12489" CreationDate="2017-06-22T14:37:56.530" Score="2" Body="&lt;p&gt;There are several ways to do this. Check out GNU screen and tmux, both allow splitting a terminal either horizontally or vertically (or both). I prefer tmux myself, though I also use screen from time to time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other option would be to use Terminator instead of Terminal, this splits the window itself and is arguably easier to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The nice thing about screen/tmux is you can ssh to a remote machine and then run them there so you only have a single connection but still have multiple shells.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-06-22T14:37:56.530" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12494" PostTypeId="2" ParentId="12491" CreationDate="2017-06-22T14:44:59.053" Score="1" Body="&lt;p&gt;If you want to install windows 8 and remove elementary  you do not need to create partitions from elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to create partition without Windows pre-installed on the hard drive, you can use a Windows installation disc to run Diskpart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If nevertheless you insist on doing it from elementary you can use the application gparted included on elementary installer disk.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Use Loki Live-USB&lt;/li&gt;&#xA;&lt;li&gt;Boot Elementary from that USB.&lt;/li&gt;&#xA;&lt;li&gt;Open &quot;Application&quot; and run Gparted (There you can change your partitions)&lt;/li&gt;&#xA;&lt;li&gt;Restart removing Live-USB&lt;/li&gt;&#xA;&lt;li&gt;Install Windows 8&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I understand that Microsoft will remove grub from master boot record with a clean install (I cannot check that as I only use linux in my computers).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just in case this is not true try the following method:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Put a windows installation cd/dvd it in your optical drive or usb live installation in your USB and boot from it. On the installation screen where it asks you to install windows, click on Repair Your Computer on the lower left corner of your screen.&#xA;Now go to command prompt (It probably will show a window saying &quot;Trying to repair windows automatically&quot;, close it) and type BootRec.exe /fixmbr&#xA;after it finishes GRUB is gone and you can now boot into windows directly.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastEditorUserId="6398" LastEditDate="2017-06-22T16:44:10.417" LastActivityDate="2017-06-22T16:44:10.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12497" PostTypeId="2" ParentId="12462" CreationDate="2017-06-22T19:45:07.050" Score="0" Body="&lt;p&gt;Here is a non answer answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tying watching a video using VLC and see if you can get the subtitles to work.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install vlc&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This will help in seeing if it is the video player or the subtitle file. &lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-06-22T19:45:07.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12498" PostTypeId="2" ParentId="12319" CreationDate="2017-06-22T21:06:53.997" Score="1" Body="&lt;p&gt;Bug fix found. it is caused by the 'GTK_MODULES=pantheon-filechooser-module' env. After removing it from /etc/profile.d/pantheon-filechooser-module.sh and reboot, Chrome does not freeze when uploading a file anymore.&#xA; &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=716892&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.chromium.org/p/chromium/issues/detail?id=716892&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10263" LastActivityDate="2017-06-22T21:06:53.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12500" PostTypeId="1" AcceptedAnswerId="12505" CreationDate="2017-06-23T04:58:01.600" Score="0" ViewCount="363" Body="&lt;p&gt;How do you replace text on scratch?&#xA;Usually, text replace prompt has two text fields, but what I get is a single text field.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I click &quot;Replace&quot; or &quot;Replace all&quot;, found texts are replaced by null , meaning just erased.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2017-06-23T22:20:19.247" Title="Text replacement in scratch-text-editor" Tags="|release-loki|applications|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12505" PostTypeId="2" ParentId="12500" CreationDate="2017-06-23T22:20:19.247" Score="1" Body="&lt;p&gt;Make sure your window is big enough to fit both text fields.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WFjG9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WFjG9.png&quot; alt=&quot;When the window is big enough&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YaEXW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YaEXW.png&quot; alt=&quot;When the window is too small&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10184" LastActivityDate="2017-06-23T22:20:19.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12507" PostTypeId="1" CreationDate="2017-06-24T02:35:49.433" Score="0" ViewCount="393" Body="&lt;p&gt;I've just installed the last stable version but the applications centre doesn't work, clicking on the icon nothing happens, any solution?&lt;/p&gt;&#xA;" OwnerUserId="10280" LastActivityDate="2018-12-18T10:02:10.420" Title="Applications centre doesn't open" Tags="|applications|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12508" PostTypeId="1" AcceptedAnswerId="12516" CreationDate="2017-06-24T04:02:39.980" Score="1" ViewCount="1191" Body="&lt;p&gt;I tried &lt;a href=&quot;https:///www.howtoforge.com/tutorial/ubuntu-rolling-release/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this way&lt;/a&gt;, but it's not working on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I do rolling release update or is it impossible on elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="10269" LastEditorUserId="308" LastEditDate="2018-08-07T17:14:03.000" LastActivityDate="2019-01-24T08:26:43.697" Title="Is there a way to support rolling release update on elementary OS?" Tags="|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12509" PostTypeId="2" ParentId="12507" CreationDate="2017-06-24T06:29:29.867" Score="1" Body="&lt;p&gt;I also faced same issue after installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open software-center.&#xA;Its worked for me.&lt;/p&gt;&#xA;&#xA;&#xA;" OwnerUserId="10282" LastEditorUserId="7492" LastEditDate="2017-06-25T15:13:38.897" LastActivityDate="2017-06-25T15:13:38.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12513" PostTypeId="2" ParentId="10854" CreationDate="2017-06-24T19:34:29.460" Score="1" Body="&lt;p&gt;I'll have a guess here, but i can assume its the root cause.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case your laptop configures your disk as RAID you need to switch it to AHCI in your BIOS setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just go to your bios and look it up, or search the net for your laptop model to see the default configuration. if its Dell XPS i can tell you right now that its configured as RAID. &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-24T19:34:29.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12514" PostTypeId="1" AcceptedAnswerId="12515" CreationDate="2017-06-24T19:54:48.317" Score="0" ViewCount="2602" Body="&lt;p&gt;In Loki when I type python --version i get 2.7.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to remove Python 2.7 kompletely and install instead Python 3 how to do that?&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2017-06-25T00:49:33.447" Title="How to completely remove Python 2 and install Python 3?" Tags="|python|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12515" PostTypeId="2" ParentId="12514" CreationDate="2017-06-25T00:49:33.447" Score="1" Body="&lt;p&gt;I have seen that done before (2.7 replacing 2.4) and things didn't go really well. As @Renato A. has mentioned, lots of Linux packages uses Python 2. You can check the files on &lt;code&gt;/bin&lt;/code&gt; or &lt;code&gt;/usr/bin&lt;/code&gt; and see that some of them are actually just Python scripts or in some manner pointing to one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not obvious but scripts that are made for Python 2 won't necessarily work on Python 3. Python 3 intentionally has no backwards compatibility.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can always install Python 3 alongside with Python 2 and just call &lt;code&gt;python3&lt;/code&gt; instead of &lt;code&gt;python&lt;/code&gt; whenever you need it.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-06-25T00:49:33.447" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12516" PostTypeId="2" ParentId="12508" CreationDate="2017-06-25T01:08:40.347" Score="4" Body="&lt;p&gt;elementary OS does not support rolling releases. I also advise you not to try to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attempts to use a rolling release repositories on elementary OS will result in broken packages since core elementary OS packages rely on Ubuntu's LTS ones. The packages you'll get are even development versions, which can make your system unstable and buggy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are really into rolling releases but want the Pantheon desktop, Arch is the way to go. However, it requires you to read all the necessary documentations and to make sure that you know what you are doing.&lt;/p&gt;&#xA;" OwnerUserId="686" LastEditorUserId="686" LastEditDate="2018-11-07T03:08:28.137" LastActivityDate="2018-11-07T03:08:28.137" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12518" PostTypeId="2" ParentId="12398" CreationDate="2017-06-25T07:15:46.077" Score="1" Body="&lt;p&gt;Tried it, indeed it doesn't let you.&#xA;The correct thing is to search the code of this module and lookup if there are any hardcoded restrictions on this key, if so i would ask why its restricted.&lt;/p&gt;&#xA;&lt;p&gt;Anyway,&#xA;You have a workaround&#xA;I use this program in order to manipulate text and key shortcuts &lt;a href=&quot;https://github.com/autokey/autokey&quot; rel=&quot;nofollow noreferrer&quot;&gt;AutoKey&lt;/a&gt;&#xA;There you can map your key to execute whatever you want (using python script that you write inside the program itself)&lt;/p&gt;&#xA;&lt;p&gt;For example &lt;code&gt;keyboard.send_keys(&amp;quot;%s&amp;quot; %_date)&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm also sure there are other mapping keys programs that you can install in parallel&lt;/p&gt;&#xA;" OwnerUserId="8520" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-06-25T07:15:46.077" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12519" PostTypeId="1" AcceptedAnswerId="12521" CreationDate="2017-06-25T09:33:53.877" Score="2" ViewCount="635" Body="&lt;p&gt;I don't like those gray minimize maximize buttons (icons). How can I replace just them. I do not want to install a new theme just the buttons in standart elementary theme.&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2018-10-03T21:51:13.397" Title="How to replace just close minimize window icons?" Tags="|icons|minimize|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12520" PostTypeId="2" ParentId="10888" CreationDate="2017-06-25T10:02:41.547" Score="0" Body="&lt;p&gt;When starting computer enter BIOS settings and find tab where you can change default boot loader to grub instead of windows boot loader. Windows boot loader does not allow booting other systems than windows. Usually you just need to move grub boot loader above windows and that's it. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-06-25T10:02:41.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12521" PostTypeId="2" ParentId="12519" CreationDate="2017-06-25T12:37:52.913" Score="2" Body="&lt;p&gt;Copy the elementary theme and replace the icon files and set it as a new theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry i was on my iPod so i couldn't really tell you in all details.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Copy the elementary theme from /usr/share/icons/ to documents.&lt;/li&gt;&#xA;&lt;li&gt;Open the index.theme and edit the following.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;[Icon Theme] Name=elementary&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;[Icon Theme] Name=elementaryNewTheme&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the folder to the same name.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Get the icons you would like to replace and replace the ones in the &quot;elementaryNewTheme&quot; folder. (you can use the search option of pantheon-files to make it easier)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open pantheon with administrator (right click at the dock -&gt; new window as admin)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;now copy the &quot;elementaryNewTheme&quot; from /home/yourUserName/Documents/ to /usr/share/icons/&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;use elementary tweaks to change the icon pack to &quot;elementaryNewTheme&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;should do the trick.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="10184" LastEditorUserId="10184" LastEditDate="2017-06-25T17:51:51.833" LastActivityDate="2017-06-25T17:51:51.833" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12523" PostTypeId="1" AcceptedAnswerId="12533" CreationDate="2017-06-25T17:10:56.047" Score="0" ViewCount="1090" Body="&lt;p&gt;I recently installed ElementaryOS Loki 0.4.1 in my SSD on top of an old Windows 10 dual-boot with Ubuntu 17.04 setup. Ubuntu was in my HDD, so GRUB detected it and included it in the OSes list after booting. But now I wiped it clean and installed Windows 10 in the HDD, so I had to use &lt;code&gt;boot-repair&lt;/code&gt; to fix it and followed the standard repair routine. It gave me an error in the end, but the log file wasn't saved to my home for some reason, but the GRUB update worked fine. I can see my elementaryOS and Windows listed correctly on GRUB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, my boot time increased a lot (to more than 3 minutes) and I'll include the output of &lt;code&gt;dmesg&lt;/code&gt; and &lt;code&gt;systemd-analyze plot&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dmesg&lt;/code&gt; is too long to include here, so I chopped some stuff off, but the problems I noticed are related to the Bluetooth apparently, maybe the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    9.432748] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243&#xA;[   98.575621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[  105.638811] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready&#xA;[  189.179729] Bluetooth: RFCOMM TTY layer initialized&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The almost complete output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    1.046472] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0&#xA;[    1.092688] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting&#xA;[    1.094919] random: fast init done&#xA;[    1.142546] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting&#xA;[    1.144642] fbcon: inteldrmfb (fb0) is primary device&#xA;[    1.144699] Console: switching to colour frame buffer device 240x67&#xA;[    1.144719] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device&#xA;[    1.186754] usb 1-1: new high-speed USB device number 2 using ehci-pci&#xA;[    1.206746] usb 2-1: new high-speed USB device number 2 using ehci-pci&#xA;[    1.322311] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;[    1.322328] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)&#xA;[    1.323676] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded&#xA;[    1.323678] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out&#xA;[    1.323679] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out&#xA;[    1.324265] ata1.00: ATA-8: KINGSTON RBU-SNS8100S3128GD, S8FM06.9, max UDMA/133&#xA;[    1.324267] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA&#xA;[    1.324926] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133&#xA;[    1.324928] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA&#xA;[    1.324949] ata1.00: configured for UDMA/133&#xA;[    1.325213] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON RBU-SNS 06.9 PQ: 0 ANSI: 5&#xA;[    1.326188] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded&#xA;[    1.326190] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out&#xA;[    1.326192] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out&#xA;[    1.327366] ata5.00: configured for UDMA/133&#xA;[    1.335477] usb 1-1: New USB device found, idVendor=8087, idProduct=8008&#xA;[    1.335479] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0&#xA;[    1.335816] hub 1-1:1.0: USB hub found&#xA;[    1.335898] hub 1-1:1.0: 6 ports detected&#xA;[    1.354900] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)&#xA;[    1.354932] sd 0:0:0:0: [sda] Write Protect is off&#xA;[    1.354933] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00&#xA;[    1.354940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA&#xA;[    1.354942] sd 0:0:0:0: Attached scsi generic sg0 type 0&#xA;[    1.355158] usb 2-1: New USB device found, idVendor=8087, idProduct=8000&#xA;[    1.355160] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0&#xA;[    1.355299] scsi 4:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5&#xA;[    1.355425] hub 2-1:1.0: USB hub found&#xA;[    1.355519] hub 2-1:1.0: 8 ports detected&#xA;[    1.356437]  sda: sda1 sda2 sda3&#xA;[    1.356666] sd 0:0:0:0: [sda] Attached SCSI disk&#xA;[    1.398938] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)&#xA;[    1.398941] sd 4:0:0:0: [sdb] 4096-byte physical blocks&#xA;[    1.398963] sd 4:0:0:0: Attached scsi generic sg1 type 0&#xA;[    1.398964] sd 4:0:0:0: [sdb] Write Protect is off&#xA;[    1.398966] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00&#xA;[    1.398973] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA&#xA;[    1.622756] usb 1-1.3: new full-speed USB device number 3 using ehci-pci&#xA;[    1.628409] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f03)&#xA;[    1.642751] usb 2-1.8: new full-speed USB device number 3 using ehci-pci&#xA;[    1.646066] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.&#xA;[    1.663878] psmouse serio1: elantech: Elan sample query result 05, 6b, 64&#xA;[    1.733042] usb 1-1.3: New USB device found, idVendor=8087, idProduct=07dc&#xA;[    1.733043] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0&#xA;[    1.751020] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5&#xA;[    1.753982] usb 2-1.8: New USB device found, idVendor=1770, idProduct=ff00&#xA;[    1.753984] usb 2-1.8: New USB device strings: Mfr=1, Product=1, SerialNumber=1&#xA;[    1.753985] usb 2-1.8: Product: MSI EPF USB&#xA;[    1.753986] usb 2-1.8: Manufacturer: MSI EPF USB&#xA;[    1.753986] usb 2-1.8: SerialNumber: MSI EPF USB&#xA;[    1.756735] hidraw: raw HID events driver (C) Jiri Kosina&#xA;[    1.759304] usbcore: registered new interface driver usbhid&#xA;[    1.759304] usbhid: USB HID core driver&#xA;[    1.830721] tsc: Refined TSC clocksource calibration: 2494.224 MHz&#xA;[    1.830727] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f3e9a353a, max_idle_ns: 440795330815 ns&#xA;[    2.608950]  sdb: sdb1 sdb2&#xA;[    2.609486] sd 4:0:0:0: [sdb] Attached SCSI disk&#xA;[    2.854758] clocksource: Switched to clocksource tsc&#xA;[    2.931211] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting&#xA;[    8.166944] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)&#xA;[    8.280010] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)&#xA;[    8.280167] systemd[1]: Detected architecture x86-64.&#xA;[    8.280340] systemd[1]: Set hostname to &amp;lt;vamcs-elementary&amp;gt;.&#xA;[    8.343417] systemd[1]: Reached target User and Group Name Lookups.&#xA;[    8.343463] systemd[1]: Reached target Remote File Systems (Pre).&#xA;[    8.343491] systemd[1]: Started Forward Password Requests to Wall Directory Watch.&#xA;[    8.343517] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.&#xA;[    8.343543] systemd[1]: Listening on udev Control Socket.&#xA;[    8.343562] systemd[1]: Listening on LVM2 poll daemon socket.&#xA;[    8.343637] systemd[1]: Created slice System Slice.&#xA;[    8.399891] lp: driver loaded but no devices found&#xA;[    8.402834] ppdev: user-space parallel port driver&#xA;[    8.456952] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro&#xA;[    8.463293] systemd-journald[380]: Received request to flush runtime journal from PID 1&#xA;[    8.652341] EDAC MC: Ver: 3.0.0&#xA;[    8.654404] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4&#xA;[    8.656172] EDAC ie31200: No ECC support&#xA;[    8.686998] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer&#xA;[    8.687000] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules&#xA;[    8.687000] RAPL PMU: hw unit of domain package 2^-14 Joules&#xA;[    8.687001] RAPL PMU: hw unit of domain dram 2^-14 Joules&#xA;[    8.687002] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules&#xA;[    8.688962] Intel(R) Wireless WiFi driver for Linux&#xA;[    8.688963] Copyright(c) 2003- 2015 Intel Corporation&#xA;[    8.689032] iwlwifi 0000:05:00.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    8.704215] AVX2 version of gcm_enc/dec engaged.&#xA;[    8.704217] AES CTR mode by8 optimization enabled&#xA;[    8.711536] snd_hda_intel 0000:00:03.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    8.711688] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])&#xA;[    8.711721] snd_hda_intel 0000:00:1b.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    8.712555] iwlwifi 0000:05:00.0: loaded firmware version 17.459231.0 op_mode iwlmvm&#xA;[    8.712903] Bluetooth: Core ver 2.21&#xA;[    8.712914] NET: Registered protocol family 31&#xA;[    8.712914] Bluetooth: HCI device and connection manager initialized&#xA;[    8.712917] Bluetooth: HCI socket layer initialized&#xA;[    8.712919] Bluetooth: L2CAP socket layer initialized&#xA;[    8.712923] Bluetooth: SCO socket layer initialized&#xA;[    8.718863] usbcore: registered new interface driver btusb&#xA;[    8.728850] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker&#xA;[    8.728853] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)&#xA;[    8.728854] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x14/0x0/0x0/0x0/0x0)&#xA;[    8.728855] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0&#xA;[    8.728856] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0&#xA;[    8.728857] snd_hda_codec_realtek hdaudioC1D0:    inputs:&#xA;[    8.728859] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18&#xA;[    8.728860] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12&#xA;[    8.733642] Bluetooth: hci0: read Intel version: 370710018002030d55&#xA;[    8.733644] Bluetooth: hci0: Intel device is already patched. patch num: 55&#xA;[    8.737289] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8&#xA;[    8.737352] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9&#xA;[    8.745167] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10&#xA;[    8.745226] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11&#xA;[    8.745283] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12&#xA;[    8.752021] intel_rapl: Found RAPL domain package&#xA;[    8.752023] intel_rapl: Found RAPL domain core&#xA;[    8.752026] intel_rapl: Found RAPL domain uncore&#xA;[    8.752028] intel_rapl: Found RAPL domain dram&#xA;[    8.752032] intel_rapl: RAPL package 0 domain package locked by BIOS&#xA;[    8.752045] intel_rapl: RAPL package 0 domain dram locked by BIOS&#xA;[    8.755507] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144&#xA;[    8.757563] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[    8.757810] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[    8.770200] input: MSI WMI hotkeys as /devices/virtual/input/input13&#xA;[    8.781095] wl: loading out-of-tree module taints kernel.&#xA;[    8.781098] wl: module license 'MIXED/Proprietary' taints kernel.&#xA;[    8.781098] Disabling lock debugging due to kernel taint&#xA;[    8.784160] wl: module verification failed: signature and/or required key missing - tainting kernel&#xA;[    8.832593] nvidia 0000:01:00.0: enabling device (0006 -&amp;gt; 0007)&#xA;[    8.832775] nvidia-nvlink: Nvlink Core is being initialized, major device number 244&#xA;[    8.832792] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)&#xA;[    8.841956] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.66  Mon May  1 14:33:30 PDT 2017&#xA;[    8.842990] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver&#xA;[    8.844895] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.844942] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.844971] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.844998] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.845025] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.845060] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.845088] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    8.949516] random: crng init done&#xA;[    8.995583] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'&#xA;[    8.996844] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0&#xA;[    9.004151] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[    9.038106] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem&#xA;[    9.040228] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)&#xA;[    9.128621] audit: type=1400 audit(1498408617.703:2): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/ippusbxd&quot; pid=800 comm=&quot;apparmor_parser&quot;&#xA;[    9.128933] audit: type=1400 audit(1498408617.703:3): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/cups-browsed&quot; pid=798 comm=&quot;apparmor_parser&quot;&#xA;[    9.129046] audit: type=1400 audit(1498408617.703:4): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/mysqld&quot; pid=801 comm=&quot;apparmor_parser&quot;&#xA;[    9.129480] audit: type=1400 audit(1498408617.703:5): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/sbin/dhclient&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    9.129483] audit: type=1400 audit(1498408617.703:6): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/NetworkManager/nm-dhcp-client.action&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    9.129485] audit: type=1400 audit(1498408617.703:7): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/NetworkManager/nm-dhcp-helper&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    9.129488] audit: type=1400 audit(1498408617.703:8): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/connman/scripts/dhclient-script&quot; pid=796 comm=&quot;apparmor_parser&quot;&#xA;[    9.130488] audit: type=1400 audit(1498408617.703:9): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/lightdm/lightdm-guest-session&quot; pid=795 comm=&quot;apparmor_parser&quot;&#xA;[    9.130493] audit: type=1400 audit(1498408617.703:10): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/lightdm/lightdm-guest-session//chromium&quot; pid=795 comm=&quot;apparmor_parser&quot;&#xA;[    9.131458] audit: type=1400 audit(1498408617.707:11): apparmor=&quot;STATUS&quot; operation=&quot;profile_load&quot; profile=&quot;unconfined&quot; name=&quot;/usr/lib/cups/backend/cups-pdf&quot; pid=799 comm=&quot;apparmor_parser&quot;&#xA;[    9.410432] Adding 8306684k swap on /dev/mapper/elementary--vg-swap_1.  Priority:-1 extents:1 across:8306684k SSFS&#xA;[    9.411457] nvidia-modeset: Allocated GPU:0 (GPU-76c185c2-53c5-0650-3131-0f0efd7aa80a) @ PCI:0000:01:00.0&#xA;[    9.411692] nvidia-modeset: Freed GPU:0 (GPU-76c185c2-53c5-0650-3131-0f0efd7aa80a) @ PCI:0000:01:00.0&#xA;[    9.411751] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).&#xA;[    9.411752] [drm] No driver support for vblank timestamp query.&#xA;[    9.432748] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243&#xA;[   98.575621] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   98.575624] Bluetooth: BNEP filters: protocol multicast&#xA;[   98.575632] Bluetooth: BNEP socket layer initialized&#xA;[   98.588883] bbswitch: version 0.8&#xA;[   98.588889] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0&#xA;[   98.588895] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP&#xA;[   98.588908] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160422/nsarguments-95)&#xA;[   98.588993] bbswitch: detected an Optimus _DSM function&#xA;[   98.589001] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on&#xA;[   98.649162] audit_printk_skb: 27 callbacks suppressed&#xA;[   98.649163] audit: type=1400 audit(1498408707.223:21): apparmor=&quot;STATUS&quot; operation=&quot;profile_replace&quot; profile=&quot;unconfined&quot; name=&quot;/usr/sbin/mysqld&quot; pid=1133 comm=&quot;apparmor_parser&quot;&#xA;[   98.677427] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready&#xA;[   98.679532] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[   98.679776] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[   98.852006] vgaarb: this pci device is not a vga device&#xA;[   98.854247] nvidia-modeset: Allocated GPU:0 (GPU-76c185c2-53c5-0650-3131-0f0efd7aa80a) @ PCI:0000:01:00.0&#xA;[   98.854559] nvidia-modeset: Freed GPU:0 (GPU-76c185c2-53c5-0650-3131-0f0efd7aa80a) @ PCI:0000:01:00.0&#xA;[   98.863951] vgaarb: this pci device is not a vga device&#xA;[   98.878290] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[   98.878538] iwlwifi 0000:05:00.0: L1 Enabled - LTR Enabled&#xA;[   98.900381] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready&#xA;[   98.904294] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready&#xA;[   98.906132] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready&#xA;[   99.021815] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready&#xA;[  105.631127] wlp5s0: authenticate with 1c:5f:2b:fb:8a:32&#xA;[  105.633999] wlp5s0: send auth to 1c:5f:2b:fb:8a:32 (try 1/3)&#xA;[  105.634555] wlp5s0: authenticated&#xA;[  105.636323] wlp5s0: associate with 1c:5f:2b:fb:8a:32 (try 1/3)&#xA;[  105.637438] wlp5s0: RX AssocResp from 1c:5f:2b:fb:8a:32 (capab=0x411 status=0 aid=1)&#xA;[  105.638791] wlp5s0: associated&#xA;[  105.638811] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready&#xA;[  189.179729] Bluetooth: RFCOMM TTY layer initialized&#xA;[  189.179735] Bluetooth: RFCOMM socket layer initialized&#xA;[  189.179739] Bluetooth: RFCOMM ver 1.11&#xA;[  197.766603] usb 3-2: new full-speed USB device number 2 using xhci_hcd&#xA;[  197.907975] usb 3-2: New USB device found, idVendor=1038, idProduct=1364&#xA;[  197.907977] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0&#xA;[  197.907978] usb 3-2: Product: Kana Gaming Mouse&#xA;[  197.907979] usb 3-2: Manufacturer: SteelSeries&#xA;[  197.918128] hid-generic 0003:1038:1364.0002: hiddev0,hidraw0: USB HID v1.11 Device [SteelSeries Kana Gaming Mouse] on usb-0000:00:14.0-2/input0&#xA;[  197.918266] input: SteelSeries Kana Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1038:1364.0003/input/input14&#xA;[  197.978586] hid-generic 0003:1038:1364.0003: input,hidraw1: USB HID v1.11 Mouse [SteelSeries Kana Gaming Mouse] on usb-0000:00:14.0-2/input1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And I noticed using &lt;code&gt;systemd-analyse plot&lt;/code&gt; that there is a huge gap as showed below:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YT6B2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YT6B2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I also screenshot the detail just before the gap:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zmb6o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zmb6o.png&quot; alt=&quot;Plymouth services are the last ones to show up before the gap.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to fix this? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: it's related to corrupt partitions apparently, I'm trying to use testdisk to fix it and will post answer if I succeed.&lt;/p&gt;&#xA;" OwnerUserId="10302" LastEditorUserId="10302" LastEditDate="2017-06-25T21:00:13.563" LastActivityDate="2017-06-27T03:02:01.357" Title="Slow boot after reinstalling GRUB" Tags="|release-loki|boot|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12526" PostTypeId="1" CreationDate="2017-06-26T10:50:24.903" Score="1" ViewCount="178" Body="&lt;p&gt;Ive been using Chromium for a while and have 2 profiles with 2 different google accounts synced with them. Works just fine. I wanted to use netflix on my linux side of things (I dual boot windows) so I uninstalled chromium and installed Chrome. All is well so far. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I log in with my google account, everything syncs up...except passwords. Passwords for some reason aren't syncing on either profile. After I log in and sync my bookmarks and whatnot, I restart chrome to see if that can get my passwords to sync. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon starting back up (which also isnt very quick, takes a few seconds), I'm greeted with a small popup that says &quot;Something went wrong when opening your profile. Some features may be unavailable.&quot; This then logs me out, forcing me to log back in. This happens &lt;em&gt;every&lt;/em&gt; single time I restart chrome, on either profile. On my mac, and in windows, and in chromium, both profiles work perfectly fine. It is only on Elementary and on Chrome that it is an issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I've uninstalled Chrome (purge and rm -rf the config under /.config/google-chrome-stable) and went back to Chromium, and now chromium is doing the same thing. &lt;/p&gt;&#xA;" OwnerUserId="10309" LastEditorUserId="10309" LastEditDate="2017-06-26T11:54:55.737" LastActivityDate="2024-03-22T17:08:51.057" Title="Chrome profiles not working properly" Tags="|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12527" PostTypeId="2" ParentId="12526" CreationDate="2017-06-26T13:01:20.347" Score="0" Body="&lt;p&gt;This usually happens when Chrome crashes for me as well as when I'm low on disk space or a lot of resources are being used. When those cases happen I have to enter my Google details again to sync my Chrome normally. This also happened when I was on Ubuntu 16.10. I never went to the length of looking into this issue. However, keeping tabs on cleaning cache and unused space limits the chances of Chrome presenting that issue. Those are the only times this issue happens to me.&lt;/p&gt;&#xA;" OwnerUserId="10248" LastActivityDate="2017-06-26T13:01:20.347" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12530" PostTypeId="2" ParentId="11829" CreationDate="2017-06-27T02:05:53.503" Score="4" Body="&lt;p&gt;This should already be fixed now, but for the record, this was a YouTube bug that was triggered by a WebKit user agent quirk designed to make the old YouTube website work better. See &lt;a href=&quot;https://bugs.webkit.org/show_bug.cgi?id=171603&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org/show_bug.cgi?id=171603&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2017-06-27T02:05:53.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12531" PostTypeId="2" ParentId="10311" CreationDate="2017-06-27T02:11:51.073" Score="3" Body="&lt;p&gt;Hardware acceleration can be disabled by setting an environment variable. Run it from the terminal like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;$ WEBKIT_DISABLE_COMPOSITING_MODE=1 epiphany&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://trac.webkit.org/wiki/EnvironmentVariables&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://trac.webkit.org/wiki/EnvironmentVariables&lt;/a&gt; for other environment variables that you'll probably never want to use.&lt;/p&gt;&#xA;&lt;p&gt;If this environment variable fixes your problem, then there's a good chance it's a bug in your hardware or graphics driver, but there's an equally-good chance it's a bug in WebKit. Regardless, your best hope of getting help is to report the issue on &lt;a href=&quot;https://bugs.webkit.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastEditorUserId="24014" LastEditDate="2020-09-25T13:30:55.150" LastActivityDate="2020-09-25T13:30:55.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12532" PostTypeId="2" ParentId="9348" CreationDate="2017-06-27T02:24:13.933" Score="2" Body="&lt;p&gt;The &quot;Oops! Unable to display this website&quot; message occurs when the WebKit process displaying the webpage crashes. (This happens in a secondary process to ensure the main Epiphany process does not crash.) Crashes are &lt;em&gt;always&lt;/em&gt; a bug that should be reported to the developers so they can try to fix it. Such issues are usually also security vulnerabilities that could be exploited by a sufficiently-determined attacker, so reporting the crash can also help make Epiphany more safe to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rarely, this might be a bug in Epiphany's code itself, but it's almost always a bug in WebKit, so it's best to report the issue on &lt;a href=&quot;https://bugs.webkit.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org&lt;/a&gt;. Prefix the bug title with [GTK] and be sure to select the WebKitGTK+ component to ensure that the right developers notice the bug. To be useful, the bug report needs to include a stack trace taken &lt;em&gt;with WebKit debug symbols&lt;/em&gt;. This requires a bit of technical expertise, but it's not too hard. See &lt;a href=&quot;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&lt;/a&gt; for information on how to get a good stack trace.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2017-06-27T02:24:13.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12533" PostTypeId="2" ParentId="12523" CreationDate="2017-06-27T03:02:01.357" Score="1" Body="&lt;p&gt;I managed to fix the problem! I followed a similar solution found &lt;a href=&quot;https://askubuntu.com/questions/612600/15-04-very-slow-boot&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the problem was that when installing Elementary OS, Ubuntu still existed and the installation used the swap partition from the HDD that belonged to Ubuntu. And since it has been deleted, the UUIDs were incorrectly set at &lt;code&gt;/etc/fstab&lt;/code&gt;, which apparently loads some partitions on boot (correct me if I'm wrong).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By running &lt;code&gt;cat /etc/fstab&lt;/code&gt; I could see that it said (not everything included):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/mapper/elementary--vg-swap_1 none            swap    sw              0       0&#xA;# swap was on /dev/sdb5 during installation&#xA;UUID=9183ee89-60f4-4fe7-bcd4-0c34da15836b none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But my swap isn't at &lt;code&gt;/dev/sdb5&lt;/code&gt;, that looks like something from the old Ubuntu installation. It is actually here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/mapper/elementary--vg-swap_1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By running &lt;code&gt;sudo blkid&lt;/code&gt; I got the UUID for it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/mapper/elementary--vg-swap_1: UUID=&quot;21945fd8-5962-4482-a0d2-abba965c8594&quot; TYPE=&quot;swap&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I simply replaced the old one for it, rebooted my computer and the boot time decreased to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 3.746s (firmware) + 3.811s (loader) + 7.321s (kernel) + 1.940s (userspace) = 16.821s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10302" LastActivityDate="2017-06-27T03:02:01.357" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12535" PostTypeId="1" CreationDate="2017-06-27T15:09:27.963" Score="2" ViewCount="359" Body="&lt;p&gt;Both the wing panel and the dock have disappeared.... for some reason non of the keyboard commands work please help me I'm new to Linux &lt;/p&gt;&#xA;" OwnerUserId="10321" LastActivityDate="2024-03-23T22:08:00.963" Title="Wing panel and dock disappeared elementary os Loki" Tags="|release-loki|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="12537" PostTypeId="2" ParentId="12535" CreationDate="2017-06-27T21:36:16.500" Score="0" Body="&lt;p&gt;Fixed the problem with a reinstall &lt;/p&gt;&#xA;" OwnerUserId="10321" LastActivityDate="2017-06-27T21:36:16.500" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12538" PostTypeId="1" CreationDate="2017-06-28T01:11:48.333" Score="0" ViewCount="1436" Body="&lt;p&gt;I connected a Wii U Pro controller to Loki via Bluetooth. It works perfectly but the mapping is correct, like the Nintendo controller it is, which is not good for me! I want the button mapping to work like an XBOX 360's controller (A on bottom, B  on right, etc).&lt;/p&gt;&#xA;&lt;p&gt;Is there any way to manage controllers on elementary and remap their button layouts? Thanks in advance. C:&lt;/p&gt;&#xA;" OwnerDisplayName="user10327" LastEditorUserId="25319" LastEditorDisplayName="user10327" LastEditDate="2021-10-13T08:25:42.637" LastActivityDate="2021-10-13T08:25:42.637" Title="How to remap Wii U Pro controller buttons?" Tags="|release-loki|settings|bluetooth|games|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12539" PostTypeId="2" ParentId="12538" CreationDate="2017-06-28T01:42:03.943" Score="0" Body="&lt;p&gt;I’ve never tried this but I heard that this should work for most controllers:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.omgubuntu.co.uk/2014/06/ubuntu-xbox-controller-support-xboxdrv-driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.omgubuntu.co.uk/2014/06/ubuntu-xbox-controller-support-xboxdrv-driver&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;Let me know if it works! &lt;/p&gt;&#xA;" OwnerUserId="10184" LastActivityDate="2017-06-28T01:42:03.943" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12546" PostTypeId="1" CreationDate="2017-06-28T20:15:32.243" Score="0" ViewCount="726" Body="&lt;p&gt;A fey days ago the &lt;em&gt;Wingpanel&lt;/em&gt; icon showed up in my dock, and it have been there ever since. It does not go away with reboots or anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does someone have a way to hide i from the dock again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/k5Wey.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k5Wey.png&quot; alt=&quot;Picture of Plank&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10339" LastEditorUserId="10163" LastEditDate="2017-10-29T20:13:09.687" LastActivityDate="2018-08-27T04:00:48.337" Title="Wingpanel icon visible in Plank" Tags="|wingpanel|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12547" PostTypeId="1" AcceptedAnswerId="12576" CreationDate="2017-06-28T22:44:37.610" Score="0" ViewCount="1206" Body="&lt;p&gt;Currently running Elementary OS Loki, have set up keyboard shortcuts for tiling to left and right to be Shift+Super+Left/Right. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes this seems to push windows to other screens, however I feel like that's just a bug. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7879/keyboard-shortcut-to-move-window-to-different-monitor&quot;&gt;here&lt;/a&gt; that Shift+Super+Up/Down should do it by default, but that doesn't seem to be the case. If anyone can shed some light on this, that would be much appreciated!&lt;/p&gt;&#xA;" OwnerUserId="10341" LastActivityDate="2017-07-01T23:58:38.857" Title="Shortcut to shift window to second monitor" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12548" PostTypeId="1" AcceptedAnswerId="12560" CreationDate="2017-06-29T00:14:01.233" Score="4" ViewCount="1679" Body="&lt;p&gt;It is possible to remove this wasted space?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jh1oO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jh1oO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9706" LastActivityDate="2020-08-04T05:38:35.767" Title="How can I reduce the space between icons on wingpanel?" Tags="|wingpanel|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12549" PostTypeId="2" ParentId="12404" CreationDate="2017-06-29T02:41:40.907" Score="0" Body="&lt;p&gt;Renato,&#xA;Thank you once again for your suggestions. I just successfully installed Elementary OS on my new Lenovo Yoga along with Windows 10. This time I didn’t have a way to use Ethernet to connect to Internet, so I hoped the wireless would work…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the beginning of the installation, I was asked if I wish to connect to the wireless network, in particular to my wireless card Qualcomm Atheros QCA61x4A. After selecting this option, I was asked for password, which I imagined was my wifi password (?).  It didn’t seem like I actually connected to wifi, but  still decided to proceed with the installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Realizing that, similar to my initial attempt to install Linux, after installing Elementary on a different machine I also wasn’t able to connect to wifi, I did what you suggested in your reply, but with no avail. I will certainly attempt to do it again, but in case you have any other suggestions, please let me know. The wifi is working just fine on the Windows end …&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here’s some more information on what I got in terminal. &#xA;When I typed $ sudo nmcli dev wifi connect &quot;NAME_OF_YOUR_WIFI&quot; password &quot;type_password”, I got the error: No network with SSID ‘NAME_OF_YOUR_WIFI’ found. Meanwhile, the iw program is installed. It’s interesting that when I typed iw dev, I didn’t get anything that resembled to Qualcomm Atheros, and it wasn’t wlan0, either.  I got this instead:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;phy#0&#xA;          Interface wlp1s0&#xA;                        ifindex 2&#xA;                        wdev 0x1&#xA;                        add cc:b0:da:b5:1a:5d&#xA;                        type managed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THANK YOU so much for your time! I hope to get to the bottom of this one way or another.&#xA;Best regards!&lt;/p&gt;&#xA;" OwnerUserId="10173" LastActivityDate="2017-06-29T02:41:40.907" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12550" PostTypeId="2" ParentId="12547" CreationDate="2017-06-29T04:18:08.083" Score="0" Body="&lt;p&gt;I think that shift +super +left /right moves Windows between Desktops. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can set up your own shortcut by going to keyboard &gt;shortcuts &gt; workspaces &gt; move to left /right&lt;/p&gt;&#xA;&#xA;&lt;p&gt;let me know if that's it&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-29T04:18:08.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12554" PostTypeId="1" AcceptedAnswerId="12556" CreationDate="2017-06-29T15:16:53.203" Score="2" ViewCount="149" Body="&lt;p&gt;I always installed Elementary by erasing the whole disc so the necessary partitions were created on their own. But in a lot of tutorials on the internet people were creating those partitions themselves.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I create them myself with specific values or erasing the disc and automate that procedure is ok?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just to be clear I I am referring to the case of installing only one OS not dual booting.&lt;/p&gt;&#xA;" OwnerUserId="104" LastActivityDate="2017-06-29T17:36:33.587" Title="Partitions while installing Elementary OS" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12555" PostTypeId="2" ParentId="12546" CreationDate="2017-06-29T15:38:24.640" Score="0" Body="&lt;p&gt;Right-click and uncheck the 'Keep in Dock'-option.&lt;/p&gt;&#xA;" OwnerDisplayName="user9985" LastEditorUserId="7492" LastEditDate="2017-09-27T18:21:44.433" LastActivityDate="2017-09-27T18:21:44.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12556" PostTypeId="2" ParentId="12554" CreationDate="2017-06-29T17:36:33.587" Score="1" Body="&lt;p&gt;I find the partitions created by elementary os installer to be quite good. maybe you don't need the swap partition of you are not going to use hibernation , but other then that its OK. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW it's auto partitioning works for dual boot as well, u mean even if you are installing elOs as dual boot or can create the partitions for you&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-29T17:36:33.587" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12558" PostTypeId="1" AcceptedAnswerId="12561" CreationDate="2017-06-29T18:54:29.377" Score="2" ViewCount="3274" Body="&lt;p&gt;I've been trying to install the newest driver of Nvidia to see if i'll get better performance in games but i keep getting a black screen at boot that flashes (Switching to console doesn't work either)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone give me a step by step guide on how to properly install these drivers?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running elementary OS 0.4.1 (64-bit) and trying to install &quot;NVIDIA-Linux-x86_64-381.09.run&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help you can give me&lt;/p&gt;&#xA;" OwnerUserId="10184" LastEditorUserId="10184" LastEditDate="2017-06-29T22:36:16.967" LastActivityDate="2017-06-30T06:16:08.067" Title="Installing Nvidia proprietary driver via terminal" Tags="|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12559" PostTypeId="2" ParentId="12558" CreationDate="2017-06-29T21:42:01.640" Score="0" Body="&lt;p&gt;&lt;strong&gt;Step 1 :&lt;/strong&gt; Add the Proprietary drivers ppa&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2 :&lt;/strong&gt; Update the repos&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3 :&lt;/strong&gt; Install the nvidia driver 381.09 beta&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install nvidia-381&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Go to the AppCenter &gt; Updates -&gt; install nvidia-381&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="10184" LastActivityDate="2017-06-29T21:42:01.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12560" PostTypeId="2" ParentId="12548" CreationDate="2017-06-30T05:52:51.203" Score="3" Body="&lt;p&gt;I will say &quot;you can't&quot; because it's very difficult and useless, what makes that space in Wingpanel isn't in any config file of the system, actually this kind of stuff is compiled from source code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to try the hard method,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You will never be able to upgrade your system anymore (because it will erase your changes).&lt;/li&gt;&#xA;&lt;li&gt;You must know Vala very well and look for that line of code &lt;a href=&quot;https://github.com/elementary/wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Then you must &lt;a href=&quot;https://wiki.debian.org/BuildingTutorial&quot; rel=&quot;nofollow noreferrer&quot;&gt;compile the new source file&lt;/a&gt;, for finally &lt;a href=&quot;https://stackoverflow.com/questions/42968577/how-can-i-add-additional-source-files-when-customizing-and-rebuilding-debian-pac&quot;&gt;add it to your system&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck, I think is more easy to teach some UI lessons to the Elementary OS team. Or just hoping that they admit your line of code in Github.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="8272" LastEditDate="2017-06-30T19:38:00.363" LastActivityDate="2017-06-30T19:38:00.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12561" PostTypeId="2" ParentId="12558" CreationDate="2017-06-30T06:03:01.493" Score="1" Body="&lt;p&gt;Actually adding &lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt; is not needed anymore, since Ubuntu 16.04 added tested and working NVIDIA Drivers long ago.&#xA;And using the lastest drivers, or compiling that &quot;binaries&quot; from NVIDIA webpage will spoil your system because they are not tested by the Ubuntu team. So using &lt;code&gt;nvidia-381&lt;/code&gt;(as far as I know is the newest driver released) is not recommended and It may cause you an infinite loop black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I will recommend you to do &lt;strong&gt;the most and eficient secure method&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For making sure what driver your system needs.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ubuntu-drivers devices&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That command will tell you what packages you will need for using NVIDIA drivers.&lt;br&gt;&#xA;Then just make sure to install this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install intel-microcode&#xA;sudo apt-get install nvidia-xxx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And that's all, note that I told you &lt;code&gt;nvidia-xxx&lt;/code&gt; because you must enter the driver version displayed in &lt;code&gt;ubuntu-drivers devices&lt;/code&gt; and I warn you updating the kernel may cause you problems, so once you installed that NVIDIA driver, please don't upgrade anymore, for updating just use &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; that command will hold new kernel releases.&lt;/p&gt;&#xA;" OwnerUserId="8272" LastEditorUserId="8272" LastEditDate="2017-06-30T06:16:08.067" LastActivityDate="2017-06-30T06:16:08.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12562" PostTypeId="1" CreationDate="2017-06-30T13:05:55.087" Score="0" ViewCount="1062" Body="&lt;p&gt;I have the ISO downloaded from the ElementaryOS web site, in the install support only show how install from a USB Drive but I want know if can I burn the ISO in a CD and install from the CD?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope your response&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="10355" LastActivityDate="2019-12-21T17:48:28.223" Title="Can I install ElementaryOS from a CD?" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12563" PostTypeId="1" AcceptedAnswerId="12591" CreationDate="2017-06-30T15:26:21.723" Score="0" ViewCount="193" Body="&lt;p&gt;So I bought an Acer Swift 3 very recently, but after a fresh install off Ubuntu, it couldn't boot without setting acpi to off. I tried installing elementaryOS instead -I wanted to give it a try for a long time-, but no luck. I still had to add &lt;code&gt;acpi=off&lt;/code&gt; to boot options. However after some doing this and doing that, I installed kernel 4.10.1 and with it I could boot into OS. But during the booting I could see some really fast texts appearing at the background, giving some error messages. So my main questions are; how can I look at those boot logs, and how can I be sure if the OS is stable. Thanks already. &lt;/p&gt;&#xA;" OwnerUserId="10357" LastActivityDate="2018-05-29T18:55:51.030" Title="ACPI Parameters" Tags="|release-loki|kernel|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12565" PostTypeId="1" CreationDate="2017-06-30T16:27:17.673" Score="0" ViewCount="213" Body="&lt;p&gt;I have an Epson WP-4535 printer and every time I try to print, it comes with a notification saying &quot;Printer error&quot; (this notification comes again every five seconds) and no matter how hard I try, I install, uninstall, reinstall the drivers but it just doesn't print. Please can someone explain to me the answer as this &lt;strong&gt;REALLY&lt;/strong&gt; annoys me as I need to print lots of things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks! &lt;/p&gt;&#xA;" OwnerUserId="9098" LastActivityDate="2024-01-11T10:07:05.870" Title="Printing error - forever occuring" Tags="|release-loki|printer|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12566" PostTypeId="1" AcceptedAnswerId="12569" CreationDate="2017-06-30T18:27:44.813" Score="0" ViewCount="586" Body="&lt;p&gt;First of all, I have tried without install Elementary OS on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have seen that when I click on Applications and I click with right button the application that I would like to uninstall, well it doesn't work on all the software. For example, I have tried to uninstall Epiphany, but the button &quot;Uninstall&quot; it wasn't show.&#xA;So how is possible to uninstall apps ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second. Which is the firewall that I should use ?&#xA;The native firewall in settings or should I install gufw ?&lt;/p&gt;&#xA;" OwnerUserId="10359" LastActivityDate="2017-06-30T22:25:33.753" Title="How uninstall apps and choose the firewall?" Tags="|applications|firewall|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12567" PostTypeId="2" ParentId="12562" CreationDate="2017-06-30T20:46:10.793" Score="0" Body="&lt;p&gt;Just use one of CD burning software and burn the CD, and try to boot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the only difference I see is that you will need to set the CD as a boot option prior to HDD &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything else should be the same&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-30T20:46:10.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12568" PostTypeId="2" ParentId="12566" CreationDate="2017-06-30T20:54:34.590" Score="0" Body="&lt;p&gt;Everything you do via App center you can do via command line&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Linux Rules!!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove epiphany-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;** if you would like to remove its dependencies the replace remove with autoremove, but it might remove needed depencies as well, so proceed with caution &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but I think I've also found it in the app center, it's called &quot;gnome web&quot; &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-06-30T20:54:34.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12569" PostTypeId="2" ParentId="12566" CreationDate="2017-06-30T22:25:33.753" Score="0" Body="&lt;p&gt;gufw is just ufw (uncomplicated fire wall) with a graphical interface. You get ufw already installed with elementary, it's just that the graphical interface is different, integrated in Settings. There are some Linux distros where ufw is installed without a graphical interface and you turn the firewall on in Terminal with &lt;code&gt;sudo ufw enable&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-06-30T22:25:33.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12570" PostTypeId="1" CreationDate="2017-06-30T23:10:13.597" Score="0" ViewCount="703" Body="&lt;p&gt;First day using Elementary and I didn't change the default SMTP setting on a couple of accounts. Everything is grayed out in Mail, so I tried editing the .ini file in .local/share/pantheon-mail/ but that didn't change anything. It would be pretty useful if these settings could be changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise, a great distro!&lt;/p&gt;&#xA;" OwnerUserId="10362" LastActivityDate="2020-06-04T17:07:53.813" Title="How do I change the default SMTP setting in Mail after an account has been created?" Tags="|settings|pantheon-mail|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12572" PostTypeId="2" ParentId="12562" CreationDate="2017-07-01T08:03:48.787" Score="0" Body="&lt;p&gt;Burn the .iso file into a cd using softwares like poweriso&lt;br&gt;&#xA;&lt;strong&gt;Remember to make it bootable&lt;/strong&gt;&lt;br&gt;&#xA;Get into bios settings during startup &#xA;&lt;strong&gt;Make the priority into optical drive and save changes&lt;/strong&gt;&#xA;Else you are done  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a reference-style link to &lt;a href=&quot;https://www.youtube.com/watch?v=fQ-6iYCDFrA&amp;amp;t=303s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=fQ-6iYCDFrA&amp;amp;t=303s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10326" LastActivityDate="2017-07-01T08:03:48.787" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12573" PostTypeId="2" ParentId="12570" CreationDate="2017-07-01T21:44:56.520" Score="0" Body="&lt;p&gt;Open Mail, go to the gear menu in the upper-right corner and select Accounts (or open Mail and press Ctrl + M). Select the account in question, and click the small edit icon in the lower-left corner (the pencil icon between the + and - icons). Double-clicking an account in the Accounts window will also open it for editing.Make your change and Save.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-07-01T21:44:56.520" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12574" PostTypeId="1" AcceptedAnswerId="12575" CreationDate="2017-07-01T22:02:06.480" Score="0" ViewCount="202" Body="&lt;p&gt;So, I was playing around yesterday, and decided to uninstall lightdm and make an xinitrc file to start from the terminal at boot, as I like to do.&#xA;Well, after doing so, I am unable to play any videos in audience, or Videos, as it is called in the icon.&#xA;I did reinstall lightdm, but I fear I may have futzed up the session too much, so this happens:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ERROR 14:08:17.236311] Inhibitor.vala:62: Could not inhibit screen: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ScreenSaver was not provided by any .service files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would like very much to not have to install another video program, so just what the hell have I done?&#xA;I would very much appreciate any help anybody could provide to me for this.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2017-12-29T03:56:12.967" Title="Audience is unable to play any videos" Tags="|release-loki|videos|audience|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12575" PostTypeId="2" ParentId="12574" CreationDate="2017-07-01T23:58:15.343" Score="0" Body="&lt;p&gt;I fixed it by doing the following, as it needed some packages from elementary-desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-desktop --reinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And now it works just fine.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2017-07-01T23:58:15.343" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12576" PostTypeId="2" ParentId="12547" CreationDate="2017-07-01T23:58:38.857" Score="0" Body="&lt;p&gt;Found the problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under System Settings &gt; Keyboard &gt; Shortcuts &gt; Windows, you can set shortcuts to tile windows left and right. I set these to use Shift+Super+Left/Right. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I didn't realize is that by default you can use those keybindings to shift windows between monitors. (This option is not visible in that shortcuts page.) I found it in dconf-editor under: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;org.gnome.desktop.wm.keybindings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially I had the same keybinding for two separate functions. This seems to have caused a race conditon when working with multiple monitors as sometimes it would work shifting between screens the rest of the time it would just tile it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've now changed it so tiling is done with Shift+Alt+Left/Right and have found that shifting windows between screens now functions as expected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this is useful for someone in the future.&lt;/p&gt;&#xA;" OwnerUserId="10341" LastActivityDate="2017-07-01T23:58:38.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12578" PostTypeId="1" AcceptedAnswerId="12584" CreationDate="2017-07-02T09:50:51.520" Score="0" ViewCount="93" Body="&lt;p&gt;After updating through AppCenter I use to verify that everything is OK. When I run &lt;code&gt;sudo apt upgrade&lt;/code&gt; sometimes the command tells me that some packages are not necessary and that I should use &lt;code&gt;sudo apt autoremove&lt;/code&gt; (mostly related to kernel headers and the like).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this safe?&#xA;Should I leave those packages?&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-07-02T16:08:07.380" Title="After updating from AppCenter: sudo apt autoremove convenient?" Tags="|release-loki|updates|pantheon-terminal|appcenter|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12579" PostTypeId="2" ParentId="12562" CreationDate="2017-07-02T10:04:58.670" Score="1" Body="&lt;p&gt;Elementary OS Loki doesn't fit in a CD. You must use a DVD instead. Use any DVD record program to burn the iso in your DVD. Change boot priority in your Bios (some bios can select boot priority by F12 key) see your BIOS manual for instructions. Boot in live mode to see that everything works in your computer and once you have checked that your hardware runs well: install and enjoy.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-07-02T10:04:58.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12581" PostTypeId="1" CreationDate="2017-07-02T13:32:30.770" Score="1" ViewCount="126" Body="&lt;p&gt;The last stable version is Loki 0.4.1. Why the leading 0?&lt;/p&gt;&#xA;" OwnerUserId="4275" LastEditorUserId="4275" LastEditDate="2017-07-03T18:31:38.047" LastActivityDate="2017-07-03T18:31:38.047" Title="I'm confused by Elementary OS's version numbering" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12583" PostTypeId="2" ParentId="12581" CreationDate="2017-07-02T16:04:32.240" Score="0" Body="&lt;p&gt;I believe it's because it's still considered beta. the real question is why after being on the market for 5+years it's still a beta.... &#xA;but I guess that's something that @DanielFore can answer &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-02T16:04:32.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12584" PostTypeId="2" ParentId="12578" CreationDate="2017-07-02T16:08:07.380" Score="1" Body="&lt;p&gt;I believe you can only be sure if you review each package and it's dependency (time consuming) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do autoremove every time and nothing bad happened yet, however people did complain in the past that it removed necessary packages &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-02T16:08:07.380" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12586" PostTypeId="1" CreationDate="2017-07-02T19:53:09.627" Score="-1" ViewCount="106" Body="&lt;p&gt;Зависает при установке приложений через терминал&lt;img src=&quot;https://i.stack.imgur.com/fWhEK.png&quot; alt=&quot;![enter image description here&quot;&gt;]&lt;a href=&quot;https://i.stack.imgur.com/fWhEK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stuck on 16% !?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i did use sudo apt install pidgin...&lt;/p&gt;&#xA;" OwnerUserId="10383" LastActivityDate="2017-07-12T13:37:24.210" Title="Зависает при установке приложений через терминал!" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="1" ClosedDate="2017-07-04T00:09:40.217" ContentLicense="CC BY-SA 3.0" />
  <row Id="12587" PostTypeId="2" ParentId="12586" CreationDate="2017-07-02T20:33:08.360" Score="1" Body="&lt;p&gt;Нужно было нажать Tab, выбрать OK и все...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Press &lt;code&gt;Tab&lt;/code&gt; and then press &lt;code&gt;Enter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="10383" LastEditorUserId="26" LastEditDate="2017-07-12T13:37:24.210" LastActivityDate="2017-07-12T13:37:24.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12588" PostTypeId="1" CreationDate="2017-07-03T03:00:56.807" Score="0" ViewCount="342" Body="&lt;p&gt;I've been fiddling around with Elementary for a while and after quite stupidly installing Nautilus, my file manage now looks like this.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zR4an.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zR4an.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note the side menu with the separating bars. I've tried to reset the settings but it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get the default look back beside installing a completely new file manager?&lt;/p&gt;&#xA;" OwnerUserId="10385" LastActivityDate="2017-11-30T09:06:46.460" Title="How to fix borders in Elementary's file manager?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12589" PostTypeId="2" ParentId="12586" CreationDate="2017-07-03T06:20:36.403" Score="1" Body="&lt;p&gt;Click TAB and &lt;em&gt;OK&lt;/em&gt; wilk highlight. Then press Enter and That's it. :)&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-07-03T06:20:36.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12590" PostTypeId="2" ParentId="12588" CreationDate="2017-07-03T06:25:04.123" Score="1" Body="&lt;p&gt;I had a fresh install of Elementary OS, so I installed nautilus through the app center and what I noticed is that it added a second app icon in the applications menu called Files. One of the two is the correct, desired file manager you wanting and the other is nautilus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/imiwB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/imiwB.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried simply uninstalling nautilus again? If you cannot uninstall nautilus through the appcenter, then you can uninstall it through the terminal by issuing the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove nautilus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="10333" LastActivityDate="2017-07-03T06:25:04.123" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12591" PostTypeId="2" ParentId="12563" CreationDate="2017-07-03T10:27:29.470" Score="0" Body="&lt;p&gt;The command &lt;code&gt;sudo journalctl&lt;/code&gt; in a terminal will give you the system log from the last boot onwards, you can then scroll through using the arrow keys.&lt;/p&gt;&#xA;" OwnerDisplayName="user8531" LastActivityDate="2017-07-03T10:27:29.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12592" PostTypeId="2" ParentId="8922" CreationDate="2017-07-03T11:59:22.587" Score="0" Body="&lt;p&gt;According to this article on &lt;a href=&quot;http://www.phoronix.com/scan.php?page=news_item&amp;amp;px=RX-480-OSS-Steps&quot; rel=&quot;nofollow noreferrer&quot;&gt;Phoronix&lt;/a&gt; support for your graphics card was added to the open source AMD driver after the initial release of Ubuntu 16.04 (on which elementary is based).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to install AMDGPU Pro by following the instructions for Ubuntu 16.04 without issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will have a much better experience with the open source drivers than with AMDGPU Pro (things are less likely to break).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However if you want to install AMDGPU Pro you will still need to update the open source drivers as below (as you sill need a kernel update to support your graphics card).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu supply updated drivers for their LTS releases to enable new hardware (as each release is supported for 5 years). Instructions to install these drivers can be found &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install updated drivers run the following command in a terminal and restart your system after it completes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user8531" LastEditorDisplayName="user8531" LastEditDate="2017-07-03T12:10:51.047" LastActivityDate="2017-07-03T12:10:51.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12594" PostTypeId="2" ParentId="12581" CreationDate="2017-07-03T12:40:56.407" Score="4" Body="&lt;p&gt;I think this question has been asked a lot on different forums. The primary reason they have stuck with the leading major version number as zero is &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5hree0/elementary_os_10_2028/db2jncs/&quot; rel=&quot;noreferrer&quot;&gt;&quot;because of things [they] felt were not yet completed&quot;&lt;/a&gt;. We have an app store with a few &quot;paid apps&quot; only recently. Some hardware aren't still supported (passed down from mainstream Ubuntu not supporting them yet).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To be fair, Elementary has been stable over the years. While its developers isn't still confident about it being perfectly complete, it has brought a lot to bring Desktop Linux to users with little or zero knowledge about GNU+Linux.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-07-03T12:40:56.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12595" PostTypeId="1" AcceptedAnswerId="12599" CreationDate="2017-07-03T17:29:16.840" Score="0" ViewCount="406" Body="&lt;p&gt;Good evening. Put your system for the first time, what driver to put for the video card ATI Radeon Sapphire HD 6850? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="10390" LastActivityDate="2017-07-03T21:14:48.390" Title="GPU ATI Radeon Sapphire HD 6850" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12598" PostTypeId="1" CreationDate="2017-07-03T21:00:56.750" Score="1" ViewCount="55" Body="&lt;p&gt;After my computer has been idle for a while and has gone into suspend, I get the following authorization window. When I type my password (I'm the only user on the machine), it won't accept it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what this is/why it happens?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vyIUe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vyIUe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2019-08-26T15:02:20.327" Title="Auth window on wake" Tags="|system|" AnswerCount="1" CommentCount="0" ClosedDate="2019-08-26T16:01:41.360" ContentLicense="CC BY-SA 3.0" />
  <row Id="12599" PostTypeId="2" ParentId="12595" CreationDate="2017-07-03T21:14:48.390" Score="0" Body="&lt;p&gt;Your card is already supported by the open source drivers included in Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install updated drivers for all hardware run the following command in a terminal and reboot your system once it completes, &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;reference&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the latest stable graphics drivers (for better performance and compatibility with newer games) you can add &lt;a href=&quot;http://launchpad.net/~ubuntu-x-swat/+archive/ubuntu/updates&quot; rel=&quot;nofollow noreferrer&quot;&gt;this PPA&lt;/a&gt; to your system.&lt;/p&gt;&#xA;" OwnerDisplayName="user8531" LastActivityDate="2017-07-03T21:14:48.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12600" PostTypeId="2" ParentId="12229" CreationDate="2017-07-03T21:32:08.297" Score="1" Body="&lt;p&gt;To install updated drivers for all hardware run the following command in a terminal and reboot your system once it completes, &lt;a href=&quot;http://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;reference&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get the latest stable graphics drivers (for better performance and compatibility with newer games) you can add &lt;a href=&quot;http://launchpad.net/~ubuntu-x-swat/+archive/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;this PPA&lt;/a&gt; to your system.&lt;/p&gt;&#xA;" OwnerDisplayName="user8531" LastActivityDate="2017-07-03T21:32:08.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12601" PostTypeId="1" CreationDate="2017-07-04T07:41:30.043" Score="0" ViewCount="807" Body="&lt;p&gt;Is it possible to resize third party icons in wingpanel? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Kodxz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kodxz.png&quot; alt=&quot;big icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10397" LastActivityDate="2019-08-27T06:00:34.457" Title="Resize third party icon in wingpanel?" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12611" PostTypeId="1" AcceptedAnswerId="12712" CreationDate="2017-07-05T01:24:07.663" Score="0" ViewCount="959" Body="&lt;p&gt;I installed Elementary OS Loki today and it doesnt feel smooth at all. It is very laggy. I know for a fact, that once I updated my drives on Ubuntu, which had the same problem, it was really smooth. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am, however, unable to do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an AMD Radeon HD 5770 with 512 MB of GDDR5 memory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea how to install the proper drivers. I tried many tutorials but none helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="10407" LastActivityDate="2018-04-25T08:58:23.263" Title="Installing proper video drivers" Tags="|release-loki|drivers|graphics|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12614" PostTypeId="1" CreationDate="2017-07-05T05:34:05.593" Score="1" ViewCount="49" Body="&lt;p&gt;I haven't been able to find anything about this type of issue. Anything below about 24% is completely inaudible. 40% and up is unbearably loud.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the output device set as my headphones, Corsair Vengeance 1500 Analog Stereo.&lt;/p&gt;&#xA;" OwnerUserId="10406" LastActivityDate="2018-01-31T09:03:39.127" Title="Audio is extremely sensitive" Tags="|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12615" PostTypeId="2" ParentId="12614" CreationDate="2017-07-05T05:41:37.607" Score="1" Body="&lt;p&gt;Nevermind I fixed it, I fiddled with PulseAudio Volume Control's settings, accidentally set my headphones as input, and when I set it back to Analog Stereo Output it worked. Nice!&lt;/p&gt;&#xA;" OwnerUserId="10406" LastActivityDate="2017-07-05T05:41:37.607" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12617" PostTypeId="2" ParentId="3949" CreationDate="2017-07-05T10:24:29.580" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;download the web storm from &lt;a href=&quot;https://www.jetbrains.com/webstorm/download/#section=linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.jetbrains.com/webstorm/download/#section=linux&lt;/a&gt; &lt;/li&gt;&#xA;&lt;li&gt;after open terminal use Alt+Ctrl+t  and type &lt;code&gt;$ sudo su &lt;/code&gt; enter give your pass word get root permission.&lt;/li&gt;&#xA;&lt;li&gt;enter &lt;code&gt;cd Downloads&lt;/code&gt; get in to the directory.&lt;/li&gt;&#xA;&lt;li&gt;enter &lt;code&gt;cd WebStorm-171.4694.29/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;enter &lt;code&gt;cd bin&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;enter &lt;code&gt;sudo chmod +x webstorm.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;enter &lt;code&gt;./webstorm.sh&lt;/code&gt; now the web storm run&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;you can type &lt;code&gt;ls&lt;/code&gt;  bet ween each &lt;code&gt;cmd&lt;/code&gt; and  looking inside the list of items in the directory.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="10413" LastEditorUserId="10413" LastEditDate="2017-07-05T10:45:02.550" LastActivityDate="2017-07-05T10:45:02.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12618" PostTypeId="2" ParentId="2946" CreationDate="2017-07-05T10:45:44.803" Score="0" Body="&lt;p&gt;I have this problem too, and thought it was related to my BIOS firmware so I updated that. Still no sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Ubuntu 16.04.2 and HDMI sound works. I'm guessing some package needs to be updated.&lt;/p&gt;&#xA;" OwnerUserId="9861" LastActivityDate="2017-07-05T10:45:44.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12619" PostTypeId="1" CreationDate="2017-07-05T17:58:31.557" Score="2" ViewCount="1955" Body="&lt;p&gt;Is it possible to change the look of the login screen on Elementary OS Loki to something other than the default (pantheon greeter)? The text resolution is pretty low and my profile picture is strangely cropped. Also it doesn't match the gtk/icons theme I use (using tweaks) once I'm logged in. If anyone knows a method to customize the login screen, please do share.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E2TPV.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E2TPV.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="10404" LastEditorUserId="10404" LastEditDate="2017-07-05T21:40:16.383" LastActivityDate="2018-03-16T07:30:18.860" Title="Change Login Screen (Greeter) Theme" Tags="|release-loki|display|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12620" PostTypeId="2" ParentId="12598" CreationDate="2017-07-06T04:26:46.257" Score="0" Body="&lt;p&gt;I think it's a known &lt;a href=&quot;https://bugs.launchpad.net/appcenter/+bug/1617687&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt;&#xA;it happens to me as well as to many others&#xA;it doesn't however bother me much so I didn't even bother with a workaround&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-06T04:26:46.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12623" PostTypeId="2" ParentId="4352" CreationDate="2017-07-06T10:49:43.503" Score="1" Body="&lt;p&gt;No, I think there is no solution form developer. Although latest elementary os is included &quot;automatically adjust brightness&quot;, It is not work on ASUS Zenbook UX305CA.  &lt;/p&gt;&#xA;" OwnerUserId="10420" LastActivityDate="2017-07-06T10:49:43.503" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12624" PostTypeId="1" CreationDate="2017-07-06T10:52:29.157" Score="0" ViewCount="143" Body="&lt;p&gt;suddenly, only Firefox starts on my computer, no other program starts; terminal, files, ... none. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can not leave the system either, the option to shut down the computer does not work, nothing works except firefox. I am using the latest updated version. Both firefox and elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="10421" LastActivityDate="2024-03-15T08:02:20.267" Title="On my system just start Firefox" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12627" PostTypeId="2" ParentId="12601" CreationDate="2017-07-06T20:31:14.307" Score="1" Body="&lt;p&gt;There is a set of extra icons meant for third-party apps that you can use called elementaryPlus that fit well with the default elementary icon theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you'll need to download &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt; (allows for customization of gtk themes and icons and more). Using command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can then download &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryPlus&lt;/a&gt; icon set with command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cybre/elementaryplus&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;sudo apt-get install elementaryplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;em&gt;System Settings &gt; Tweaks &gt; Appearance&lt;/em&gt; and set &lt;em&gt;Icons&lt;/em&gt; to the 'elementaryPlus' option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not completely sure if elementaryPlus has an icon that matches the application you are using, but it's worth a try. Perhaps you could also take a look at various other icon themes such as numix, paper, etc.&lt;/p&gt;&#xA;" OwnerUserId="10404" LastActivityDate="2017-07-06T20:31:14.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12628" PostTypeId="2" ParentId="3780" CreationDate="2017-07-07T00:07:36.220" Score="0" Body="&lt;p&gt;I don't know if someone still has this problem. Anyway, I solved my problem updating those files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;appcenter.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;elementary.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;patches.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All files are in &lt;code&gt;/etc/apt/source.list.d&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And follow instructions from this URL &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629646&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1629646&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10428" LastEditorUserId="26" LastEditDate="2017-07-12T13:25:15.027" LastActivityDate="2017-07-12T13:25:15.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12629" PostTypeId="2" ParentId="7763" CreationDate="2017-07-07T00:10:46.410" Score="0" Body="&lt;p&gt;I don't know if someone still has this problem. Anyway, I solved my problem updating those files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;appcenter.list&lt;/li&gt;&#xA;&lt;li&gt;elementary.list&lt;/li&gt;&#xA;&lt;li&gt;patches.list&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All files are in /etc/apt/source.list.d&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And follow instructions from this URL &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629646&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1629646&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10428" LastActivityDate="2017-07-07T00:10:46.410" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12632" PostTypeId="1" CreationDate="2017-07-07T07:48:20.910" Score="0" ViewCount="375" Body="&lt;p&gt;I've noticed as of 7th July 2017 that the clock on the Pantheon greeter is misaligned to the right of the screen (after updating). At 8:30 in the morning I noticed that the 'M' in 'AM' was cut off - this is on a 1920x1080 screen. If this helps, I have the text size set to 'Large' in the system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks everyone!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;William&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: This seems to happen regardless of resolution, have now noticed this on my desktop with 1360x768 screen. This has not been updated for roughly three/four days.&lt;/p&gt;&#xA;" OwnerUserId="10434" LastEditorUserId="10434" LastEditDate="2017-07-07T09:37:18.637" LastActivityDate="2019-08-10T20:02:45.377" Title="Pantheon Greeter Clock Alignment / Loki" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="1" ClosedDate="2019-08-27T09:45:57.477" ContentLicense="CC BY-SA 3.0" />
  <row Id="12633" PostTypeId="2" ParentId="11825" CreationDate="2017-07-07T10:14:39.497" Score="0" Body="&lt;p&gt;I tend to use the dropbox implementation from this github: &lt;a href=&quot;https://github.com/zant95/elementary-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/zant95/elementary-dropbox&lt;/a&gt;. It integrates into the wingpanel with a matching white icon and appears to work flawlessly for me. I hate using that phrase, but literally my only problem has been that the icon does not change to black with the theme on wallpaper change, but it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this does not solve the issue, it may be related to the browser - I have found that Dropbox now wants you to login using a browser window instead of authenticating through the application itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps at least a little,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;William&lt;/p&gt;&#xA;" OwnerUserId="10434" LastActivityDate="2017-07-07T10:14:39.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12638" PostTypeId="2" ParentId="12624" CreationDate="2017-07-07T15:25:00.630" Score="-1" Body="&lt;p&gt;I have reinstalled elementary and the same thing happened to me again, it happens when I open pantheon-files as sudo, I modify some file as sudo and when I leave I encounter the same problem, I can not access any program except those that were open , And when I close them do not reopen, just open firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Abandoning elementary, the system is fine, clean and easy to use, but when something like opening pantheon-files like sudo is a problem ....&lt;/p&gt;&#xA;" OwnerUserId="10422" LastActivityDate="2017-07-07T15:25:00.630" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12640" PostTypeId="2" ParentId="12489" CreationDate="2017-07-07T15:43:47.470" Score="0" Body="&lt;p&gt;If you want to do spilt-screen terminals use terminator. I use it all the time&#xA;sudo apt-get install terminator&lt;/p&gt;&#xA;" OwnerUserId="10188" LastActivityDate="2017-07-07T15:43:47.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12642" PostTypeId="1" AcceptedAnswerId="12746" CreationDate="2017-07-07T20:13:23.507" Score="0" ViewCount="281" Body="&lt;p&gt;Do I need to remove mesa drivers before installing AMD drivers ??&#xA;tried looking up but all that comes up is how to remove drivers.&lt;/p&gt;&#xA;" OwnerUserId="10441" LastActivityDate="2017-12-16T03:18:24.377" Title="changing drivers from mesa to AMD" Tags="|drivers|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12643" PostTypeId="2" ParentId="12642" CreationDate="2017-07-08T00:36:47.320" Score="-1" Body="&lt;p&gt;Elementary os 0.4 is based on Ubuntu 16.04 wich does not support AMD GPU's. If you need intensive gpu rendering you will have to go down to elementary 0.3. But the open amd driver is quite fast.&lt;/p&gt;&#xA;" OwnerUserId="10444" LastActivityDate="2017-07-08T00:36:47.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12645" PostTypeId="1" CreationDate="2017-07-08T03:30:20.743" Score="1" ViewCount="2910" Body="&lt;p&gt;Is it possible to bypass password forever I grow tired of entering it all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to set up the computer so that my parents do not need to enter a password upon wake up and when installing programs.   They are 80 and the more passwords and password reminders I can eliminate the better off we all are.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10445" LastActivityDate="2017-07-08T20:23:00.073" Title="Is it possible to disable password" Tags="|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12647" PostTypeId="1" AcceptedAnswerId="12650" CreationDate="2017-07-08T06:11:03.907" Score="0" ViewCount="315" Body="&lt;p&gt;&lt;br/&gt;&#xA;After I installed Foxit Reader, when I click any file starts with&lt;code&gt;.&lt;/code&gt;, e.g. &lt;code&gt;.bashrc&lt;/code&gt;, The Foxit Reader will open it, and if I change the  application to a text editor and set it as the default, it only change the file I selected, (e.g. ,I changed the default app  with &lt;code&gt;.bashrc&lt;/code&gt; to gedit,and it can be opened by gedit by default,but other files like &lt;code&gt;.bash_profile&lt;/code&gt; are still opened by Foxit Reader as default). How can I change back the file association with all files start with &lt;code&gt;.&lt;/code&gt; to default?&lt;br/&gt;&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10409" LastActivityDate="2017-07-08T08:53:29.857" Title="Foxit Reader chaged default file association" Tags="|applications|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12648" PostTypeId="2" ParentId="10343" CreationDate="2017-07-08T07:56:22.260" Score="1" Body="&lt;p&gt;Cosing the System Settings and opening it again does the trick for me.&#xA;Definitely an annoying issue!&lt;/p&gt;&#xA;" OwnerUserId="10447" LastActivityDate="2017-07-08T07:56:22.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12650" PostTypeId="2" ParentId="12647" CreationDate="2017-07-08T08:53:29.857" Score="0" Body="&lt;p&gt;You can try to change your default editor with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --config editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will prompt a list with all your editors, that you can choose to keep it or select another one as well.&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2017-07-08T08:53:29.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12651" PostTypeId="2" ParentId="12632" CreationDate="2017-07-08T09:57:47.203" Score="1" Body="&lt;p&gt;Don't know if it was an update or cold reboot that fixed it but it seems to be working correctly again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks either way ^_^b&lt;/p&gt;&#xA;&#xA;&lt;p&gt;William&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; On closer inspection over the past three weeks I have noticed that this occurs only on &lt;strong&gt;Fridays&lt;/strong&gt;. On other days of the week, the formatting is correct but does tend to nearly crop in the same manner.&lt;/p&gt;&#xA;" OwnerUserId="10434" LastEditorUserId="10434" LastEditDate="2017-07-21T08:13:13.557" LastActivityDate="2017-07-21T08:13:13.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12652" PostTypeId="1" CreationDate="2017-07-08T09:59:07.287" Score="0" ViewCount="90" Body="&lt;p&gt;Already tryed the shell with 'sudo apt-get update' . It shows: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;OK:1 http://graphics.tuxedocomputers.com/ubuntu xenial InRelease&#xA;OK:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease                                                        &#xA;... and so on: OK&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But still two updates are in line in the Appcenter. One of it is &quot;Betriebssystem&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerDisplayName="user10448" LastEditorUserId="686" LastEditDate="2017-07-11T01:08:36.947" LastActivityDate="2017-08-10T01:29:01.913" Title="Starting Updates through AppCenter but no installation follows" Tags="|updates|appcenter|shell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12653" PostTypeId="1" CreationDate="2017-07-08T10:44:59.833" Score="2" ViewCount="199" Body="&lt;p&gt;I have two exchange accounts set up in Mail, but I can only view one at a time.  Can I view both together in a unified inbox as in OS X Mail?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10449" LastActivityDate="2017-07-08T10:44:59.833" Title="Elementary Mail unified inbox?" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12654" PostTypeId="1" CreationDate="2017-07-08T12:40:14.483" Score="0" ViewCount="271" Body="&lt;p&gt;for the past 10 years i am using  Linux privat and busines on different PC (Ubuntu,Mint,Bodhi, open suse etc.) but with elementary there is a new situation. I am unable to keep this distro running.&#xA;After installation elementary tweeks wing menue disappeared. I tried every  help site deinstall / install etc. and now there is no panel and no terminal.&#xA;This is the second try with elemetary maybee this Distro is only for developer not for advanced User.&#xA;Situations with personalizing linux are common, but there are soluitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe there is somewhere somebody who knows help &lt;/p&gt;&#xA;" OwnerUserId="10450" LastActivityDate="2024-03-17T17:06:35.830" Title="elmenetary os. loki 0.4.1. stable 64 bit isnt running" Tags="|system-installation|settings|wingpanel|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12655" PostTypeId="1" CreationDate="2017-07-08T17:44:36.790" Score="0" ViewCount="440" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/w9WTp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi all.    I'm having a common issue but can't find an applicable answer.    I have Windows 10 and trying to add dual boot to elementary OS.   I shrank and partitioned the drive as shown in the image above.   However the computer boots straight into Windows 10.   I am unable to run boot-repair from the elementary OS live demo.   I have elementary OS ISO on bootable USB.  Not sure, do I need to start over?   &lt;/p&gt;&#xA;" OwnerUserId="10452" LastEditorUserId="16827" LastEditDate="2019-04-13T07:15:55.507" LastActivityDate="2023-12-19T01:02:25.320" Title="elementary OS Boot issue" Tags="|system-installation|boot|microsoft-windows|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12656" PostTypeId="1" AcceptedAnswerId="12667" CreationDate="2017-07-08T18:40:51.957" Score="0" ViewCount="1056" Body="&lt;p&gt;I am using a Dell XPS 13 9350 with a Broadcom BCM4350 wifi card. I'm unable to connect to wifi or even see the option to in the network settings area.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Troubleshooting steps taken:&#xA;typed sudo apt-get purge bcmwl-kernel-source in terminal then rebooted&#xA;Then reinstalled the latest bcmwl kernel then rebooted&#xA;reinstalled elementary with wired connection&#xA;disabled, enabled, and activated network service (Network.service) &#xA;tried other distros (Fedora as an example) and I was able to connect&lt;/p&gt;&#xA;&#xA;&lt;p&gt;**output from lspci -nnk | grep -iA3 net; rfkill list all&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3a:00.0 Network controller [0280]: Broadcom Corporation BCM4350 802.11ac Wireless Network Adapter [14e4:43a3] (rev 08)&#xA;    Subsystem: Dell BCM4350 802.11ac Wireless Network Adapter [1028:0023]&#xA;    Kernel modules: brcmfmac, wl&#xA;3b:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader [10ec:525a] (rev 01)&#xA;    Subsystem: Dell RTS525A PCI Express Card Reader [1028:0704]&#xA;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see that a lot of other people are having the same issue and one user had the exact same machine I do and was unable to connect to wifi or see any option to connect. Unfortunately his question was not answered. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd appreciate any help you guys can give me!&lt;/p&gt;&#xA;" OwnerUserId="10455" LastEditorUserId="10455" LastEditDate="2017-07-09T16:58:29.590" LastActivityDate="2017-07-09T22:35:16.263" Title="Unable to connect to wifi on Dell XPS 13 9350" Tags="|wifi|" AnswerCount="2" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12657" PostTypeId="2" ParentId="12655" CreationDate="2017-07-08T20:14:56.607" Score="0" Body="&lt;p&gt;Probably you need to change default bootloader to grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter BIOS setup page and find tab where you can change default bootloader to grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably right now you have windows boot loader set as default and it's boots automatically Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had that problem too on few machines.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-07-08T20:14:56.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12658" PostTypeId="2" ParentId="12645" CreationDate="2017-07-08T20:23:00.073" Score="3" Body="&lt;p&gt;The simplest way is to go into &lt;em&gt;System Settings&lt;/em&gt; and  &lt;em&gt;User Accounts&lt;/em&gt; and set their account to log in automatically. Then go into &lt;em&gt;Security &amp;amp; Privacy&lt;/em&gt; and &lt;em&gt;uncheck&lt;/em&gt; &quot;Lock on Sleep&quot; and &quot;Lock after screen shuts down.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as using the interface is concerned, they shouldn't have to input a password at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make it even safer for the end user, you can set up their account as a &quot;Standard&quot; (i.e. non-administrator) account, after which you can use the Parental Control settings to limit their access to different programs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this is all basic system-admin stuff.  Suffice to say, you should set them up with their own &quot;Standard&quot; account and set that account to log in automatically and the screens not to lock.  If you, as the system administrator, ever need to get in and do things all you have to do is log out of their account and back in as your own.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This won't allow them to do their own system administration, but I suspect you don't want that anyway.&lt;/p&gt;&#xA;" OwnerUserId="10384" LastActivityDate="2017-07-08T20:23:00.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12659" PostTypeId="2" ParentId="12655" CreationDate="2017-07-08T21:24:17.003" Score="0" Body="&lt;p&gt;Hello thanks for your response!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/E3lgJ.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can put it on UEFI INT13, which seems to load some sort of Grub off of my USB but it's only install options.     I already installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/4lenT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="10453" LastActivityDate="2017-07-08T21:24:17.003" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12660" PostTypeId="2" ParentId="12656" CreationDate="2017-07-08T23:14:46.817" Score="0" Body="&lt;p&gt;I had this computer and wifi card, the main problem is that the card uses dell firmware. It works randomly, depending on kernel firmwares. There are tons of messages about this on dell forums. Dell french support even contacted me to get technical details about this.&#xA;I had to buy an intel wireless card to solve the problem. &lt;/p&gt;&#xA;" OwnerUserId="10457" LastActivityDate="2017-07-08T23:14:46.817" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12663" PostTypeId="2" ParentId="12654" CreationDate="2017-07-09T18:36:56.873" Score="0" Body="&lt;p&gt;I don't know what happened before you installed tweaks however there's &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12430/pantheon-shell-loading-so-slow&quot;&gt;this&lt;/a&gt; issue with Elementary that sounds similar to your issue &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can boot with installation USB and run the command in the thread &#xA;just change the paths to the ones that match your installation &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;in general I have to say the ElOS is anything but complicated, it's smooth and fun. there are some bugs, like in any other sw&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-09T18:36:56.873" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="12664" PostTypeId="1" AcceptedAnswerId="12715" CreationDate="2017-07-09T19:22:20.810" Score="0" ViewCount="59" Body="&lt;p&gt;It turns out that TexMaker, after compiling several times, crashes when I compile another one. First it appeared: &quot;Error: file not found&quot;, and then TexMaker closes and then dozens of alerts of &quot;Close Firefox&quot; appear, and a tap with &quot;Questions for Files&quot; appears too. I haven't used TexMaker too much in this laptop, but I had never experienced this. When I try to compile a beamer, it's even worse: the whole laptop crashes, and lots of tabs with the &quot;Questions for Files&quot; appear. I add some screenshots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GIlcc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GIlcc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RHeHT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RHeHT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oL9qe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oL9qe.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've recently installed (but I'd say TexMaker crashed before too) some &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt; , exactally &lt;a href=&quot;https://github.com/olejon/spotcommander/wiki/LocalFiles&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;, for Spotify , just in case it has something to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop is a bit dizzy these days, maybe because of that or maybe this was caused by other thing (it didn't recognize my password once, it indicated 18 hours of battery life - whereas I only have around 3).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="4767" LastEditorUserId="4767" LastEditDate="2017-07-09T19:37:37.250" LastActivityDate="2017-07-15T18:27:33.123" Title="Laptop crashes with TexMaker" Tags="|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12666" PostTypeId="1" CreationDate="2017-07-09T21:27:48.027" Score="0" ViewCount="325" Body="&lt;p&gt;Hi installation to SSD without swap (none recommended for SSD life).&lt;br&gt;&#xA;swapon -s returns null, and i've set swap in fstab thus:&lt;br&gt;&#xA;UUID=******* swap swap sw, noauto 0 0&lt;br&gt;&#xA;Im a Linux user for years BUT on this install I get many app crashes. (Pantheon is in SSD directory: /etc/profile.d/pantheon-filechooser-module.sh)&lt;br&gt;&#xA;Instantiating app via terminal feedback usually includes  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I try to load LibreOffice these are the last lines after above:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(soffice:16014): Gdk-WARNING **: gdk_window_set_icon_list: icons too large &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This continues with many other apps and it would be great if anyone could provide any advice as my mate Google has none.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To summaries I cannot use Libreoffice/Chrome or several other apps installed using Elementary Appcenter which is a very nice substitute for synaptic thank you. One thing I notice is if there is a show in tray option, and disable it some apps will not crash any more.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki is Lovely apart from this. I feel that due to the uniqueness of my issues its simply a hardware issue but cant figure what. Any help appreciated.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Ill add a few more load-ups via terminal:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ skrooge&#xA;WARNING: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.&#xA;WARNING: QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(skrooge:2921): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(skrooge:2921): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(skrooge:2921): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(skrooge:2921): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;*the following crash:*&#xA;alistair@alistair-X202EP:~$ libreoffice&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;(soffice:3011): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(soffice:3011): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(soffice:3011): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(soffice:3011): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&#xA;(soffice:3011): Gdk-WARNING **: gdk_window_set_icon_list: icons too large&#xA;&#xA;(soffice:3011): Gdk-WARNING **: gdk_window_set_icon_list: icons too large&#xA;intel_do_flush_locked failed: Bad address&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="1127" LastEditorUserId="16827" LastEditDate="2019-04-16T14:33:58.147" LastActivityDate="2019-04-16T14:34:48.423" Title="Many application crashes 'Loki' some system hangs" Tags="|release-loki|pantheon|crash|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ClosedDate="2019-04-16T14:34:57.267" ContentLicense="CC BY-SA 4.0" />
  <row Id="12667" PostTypeId="2" ParentId="12656" CreationDate="2017-07-09T22:35:16.263" Score="0" Body="&lt;p&gt;That chipset isn't correctly supported by bcmwl-kernel-source, so uninstall it with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot and if it still doesn't look at results for &lt;code&gt;rfkill list all&lt;/code&gt; if nothing is blocked, in terminal do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;blacklist ssb&quot; | sudo tee -a /etc/modprobe.d/blacklist.conf&#xA;echo &quot;blacklist b43&quot; | sudo tee -a /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing bcmwl-kernel-source will blacklist the open source kernel modules that do support your device.  Sometimes the older b43 and ssb modules will conflict with bcma and brcmfmac&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-07-09T22:35:16.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12668" PostTypeId="2" ParentId="12652" CreationDate="2017-07-10T06:28:42.427" Score="1" Body="&lt;p&gt;Startet my Laptop this Mondaymorning and found, that everything is ok. hm. But I don't know why ^^ &lt;/p&gt;&#xA;" OwnerDisplayName="user10448" LastActivityDate="2017-07-10T06:28:42.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12669" PostTypeId="2" ParentId="11558" CreationDate="2017-07-10T07:42:26.350" Score="1" Body="&lt;p&gt;Same problem here. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -o 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;has helped temporarily.&#xA;The problem, actually lies in FIXING this.&#xA;Obviously, the system somehow detects the orientation AND reacts on it. It only so happens that the detected orientation is wrong.&#xA;Now, where does it happen? That's what we need to fix.&#xA;Thanks a lot :)&lt;/p&gt;&#xA;" OwnerUserId="10465" LastActivityDate="2017-07-10T07:42:26.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12673" PostTypeId="2" ParentId="10288" CreationDate="2017-07-10T12:12:19.337" Score="-1" Body="&lt;p&gt;All those facing Hard Blocked problem just press the wifi button on your keyboard! It will work! &lt;/p&gt;&#xA;" OwnerUserId="10471" LastActivityDate="2017-07-10T12:12:19.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12674" PostTypeId="1" CreationDate="2017-07-10T14:14:33.277" Score="0" ViewCount="33" Body="&lt;p&gt;I would like to write some commands into one file and then I want the command line to read the file and do all commands inside the file. Step by step. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;C:\Users&amp;gt; project1.exe   &amp;lt; text1.txt   &amp;gt; data1.txt&#xA;C:\Users&amp;gt; project2.exe   &amp;lt; text2.txt   &amp;gt; data2.txt&#xA;C:\Users&amp;gt; project3.exe   &amp;lt; text3.txt   &amp;gt; data3.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, I have to write it step by step. I am using &lt;em&gt;Windows 7 Home Premium&lt;/em&gt;. I am not a programmer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help.&lt;/p&gt;&#xA;" OwnerUserId="10468" LastActivityDate="2017-07-10T15:19:33.730" Title="How to read commands from a text file" Tags="|command-line|microsoft-windows|" AnswerCount="1" CommentCount="1" ClosedDate="2017-07-12T13:18:44.363" ContentLicense="CC BY-SA 3.0" />
  <row Id="12675" PostTypeId="2" ParentId="12674" CreationDate="2017-07-10T15:19:33.730" Score="1" Body="&lt;p&gt;If your question deals with Microsoft Windows OS you are in the wrong place as this forum deals with elementary OS (a Gnu-Linux) distribution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In any case if you search &quot;batch in windows 7&quot; (something similar to scripts in gnu-linux) in the search engine you use in your browser you will get an idea of what you are asking for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have more questions refered to Windows 7 you should try:&#xA; &lt;a href=&quot;https://www.sevenforums.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.sevenforums.com&lt;/a&gt; &#xA;or look for other forums with the search engine you use.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-07-10T15:19:33.730" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12677" PostTypeId="1" CreationDate="2017-07-11T09:56:30.080" Score="1" ViewCount="426" Body="&lt;p&gt;I installed ibus but not able use the keyboard.&#xA;Hindi typing booster is not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intalled m17n and ibus table but by default its using in built keyboard layout.&lt;/p&gt;&#xA;" OwnerUserId="10483" LastActivityDate="2018-04-27T00:02:44.747" Title="How to enable ibus in loki 0.4.1" Tags="|ibus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12679" PostTypeId="1" CreationDate="2017-07-11T11:46:06.983" Score="0" ViewCount="535" Body="&lt;p&gt;How to change the default settings guest session opens with? Everytime someone has to use the guest session I have to configure the correct screen resolution, add apps to the dock, etc. All the changes are lost after log out, so I have to set everything up manually again. &lt;/p&gt;&#xA;" OwnerUserId="10485" LastActivityDate="2017-09-09T13:31:10.947" Title="Guest Session Default Settings" Tags="|release-loki|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12680" PostTypeId="2" ParentId="12679" CreationDate="2017-07-11T12:16:16.200" Score="1" Body="&lt;p&gt;&quot;Using a special user account for setting the guest preferences is the most convenient way to customize the guest session feature. Please follow these steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add a new user account with the username guest-prefs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log in to guest-prefs and change things to what you want your guests encounter at startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal window and create a symbolic link to the home directory of guest-prefs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo mkdir /etc/guest-session&#xA;sudo ln -s /home/guest-prefs /etc/guest-session/skel&#xA;Now, when you launch a guest session, it will have the same preferences as you set for guest-prefs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this tutorial we use the name guest-prefs, but you can give the special purpose user some other username.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may prefer to hide guest-prefs from the login screen and the system menu. Hopefully that will be easy to accomplish when &lt;a href=&quot;https://launchpad.net/bugs/857651&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/bugs/857651&lt;/a&gt; has been fixed.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source - &lt;a href=&quot;https://help.ubuntu.com/community/CustomizeGuestSession&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/CustomizeGuestSession&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10486" LastActivityDate="2017-07-11T12:16:16.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12681" PostTypeId="1" CreationDate="2017-07-11T18:32:58.347" Score="0" ViewCount="1818" Body="&lt;p&gt;After connecting JBL Speaker via Bluetooth sound quality is ok for my user (admin).&#xA;Another user with no admin rights gets crappy mono radio-like sound and is unable to change sound mode option to High Fidelity, always switches back to Headset.&lt;/p&gt;&#xA;" OwnerUserId="975" LastActivityDate="2018-02-21T11:21:54.460" Title="Bluetooth - poor sound quality for regular user (JBL Speaker)" Tags="|sound|bluetooth|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12682" PostTypeId="2" ParentId="7174" CreationDate="2017-07-11T21:34:32.357" Score="3" Body="&lt;p&gt;i think if you want you can, since loki is built on ubuntu 16.04 first install snapd &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then install snap applications normally. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example to install a simple app just run &lt;code&gt;sudo snap install hello&lt;/code&gt; to see the installed app use &lt;code&gt;snap list&lt;/code&gt; to run an installed app use &lt;code&gt;snap run hello&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you need to know more how to manage and install snap apps refer this link &lt;a href=&quot;https://goo.gl/aFfwvM&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://goo.gl/aFfwvM&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7074" LastActivityDate="2017-07-11T21:34:32.357" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12683" PostTypeId="1" CreationDate="2017-07-11T21:40:27.950" Score="0" ViewCount="45" Body="&lt;p&gt;Good afternoon the question is Elementary OS Loki paid or free to install in your organization system? Can after installing it on the computers in the organization to be problems with the regulatory authorities in Russia?A little weird the way the site at the same time there is written that you need to pay,but if the graph&lt;/p&gt;&#xA;" OwnerUserId="10493" LastActivityDate="2017-08-11T04:31:08.473" Title="The use of the system in the organization" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12685" PostTypeId="2" ParentId="12683" CreationDate="2017-07-12T04:26:32.607" Score="1" Body="&lt;p&gt;elementary OS is available for &quot;pay what you want&quot; which includes $0. You can always enter &quot;$0&quot; as the payment amount to download for free. You are also welcome to download once and install on as many computers (i.e. in an organization) as you would like!&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-07-12T04:26:32.607" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12687" PostTypeId="2" ParentId="5607" CreationDate="2017-07-12T10:23:32.340" Score="1" Body="&lt;p&gt;As already said in the comment, using a live-system &lt;code&gt;suspend&lt;/code&gt; won't resume. The cause is the missing swap partition (or file) with an appropriate filesystem (i.e. &lt;em&gt;not&lt;/em&gt; &lt;code&gt;tmpfs&lt;/code&gt;). If you insist on using a live-system, you may:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;config your live-system to never go to sleep and to not suspend when closing the lid, or&lt;/li&gt;&#xA;&lt;li&gt;add another writeable drive (USB, SDHC), format with e.g. &lt;code&gt;ext2&lt;/code&gt; and create a swap file there.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="10451" LastActivityDate="2017-07-12T10:23:32.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12690" PostTypeId="1" AcceptedAnswerId="12691" CreationDate="2017-07-12T20:24:50.337" Score="0" ViewCount="163" Body="&lt;p&gt;Clicking on the space between keyboard language icon and sound icon there is showing sound widget. This indicates that the icon is too long.&#xA;I was trying to reinstall wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oaUHm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oaUHm.png&quot; alt=&quot;Sound icon is too wide&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2643" LastActivityDate="2017-07-12T20:33:19.687" Title="Sound icon is too wide Wingpanel" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12691" PostTypeId="2" ParentId="12690" CreationDate="2017-07-12T20:33:19.687" Score="0" Body="&lt;p&gt;Seems like you have disabled animations. Then GTK reserves the space for the revealer.&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2017-07-12T20:33:19.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12692" PostTypeId="1" CreationDate="2017-07-13T05:42:50.200" Score="2" ViewCount="584" Body="&lt;p&gt;DrRacket (both 6.8 and 6.9) when installed has issues with GUI. Racket developers suggest that the problem could be in the os side. I have attached the screen shot. The same kind of problem is for other windows in Racket IDE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried changing the file GTK_CSD=1  in the file /etc/profile.d/gtk-csd.sh to GTK_CSD=&quot;&quot; but it did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DlChb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DlChb.png&quot; alt=&quot;DrRacket Startup Window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10505" LastEditorUserId="26" LastEditDate="2017-07-13T14:00:23.160" LastActivityDate="2020-07-27T05:20:25.923" Title="Dr. Racket GUI not working properly" Tags="|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12695" PostTypeId="2" ParentId="11112" CreationDate="2017-07-13T14:40:21.757" Score="1" Body="&lt;p&gt;Maybe your kernel is outdated? I was having issues with CPU usage and freezes with Chrome, Epiphany and Files Manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To know your kernel version open your terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/W8k7g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/W8k7g.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will return your kernel version. If your kernel is too old like 4.7.0 or 4.8.0, you can update it and see if it solves your issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how the heck do you update your kernel with simplicity and security?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Ukuu Kernel Update Utility&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -y ppa:teejee2008/ppa&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install ukuu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit: After install. You may need to run &lt;code&gt;sudo ukuu-gtk&lt;/code&gt; to starts it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1xZry.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1xZry.png&quot; alt=&quot;Select a stable version and click install&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can install an updated Kernel. I'm running 4.12.0 and it solved all my performance issues, even Atom Text Editor is running really good. I hope this solves your issues and that you can finally experience this amazing distro.&lt;/p&gt;&#xA;" OwnerUserId="4852" LastEditorUserId="4852" LastEditDate="2017-07-13T14:45:43.720" LastActivityDate="2017-07-13T14:45:43.720" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12701" PostTypeId="1" CreationDate="2017-07-14T10:47:02.617" Score="0" ViewCount="118" Body="&lt;p&gt;I've tried to play several audio disks. It works, audacious plays songs without a problem. Only when I open an audio disk in Files, it only shows 6 tracks there, although there are more. Running the command&#xA;&lt;code&gt;ls /run/user/1000/gvfs/cdda\:host\=sr0/&lt;/code&gt; reveals all the rest. I can play these &quot;hidden&quot; songs using a terminal command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's wrong with the Files and how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPD&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason when you mount a CD and open this newly generated gvfs without much waiting, Files shows only 6 tracks, but then, when you simply refresh everything appears. Or when you instead of opening the drive directly (initiating mounting and opening without any pause in between), select to mount and wait for it, you won't face this problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not a critical bug at all. However, that was totally unexpected even though I've been using Linux for years already. Breaks UX significantly.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastEditorUserId="8598" LastEditDate="2017-07-14T15:33:25.423" LastActivityDate="2023-12-13T08:05:05.587" Title="Files: slow mounting causes file display problem" Tags="|pantheon-files|audio-cd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12703" PostTypeId="1" AcceptedAnswerId="12764" CreationDate="2017-07-14T17:44:15.530" Score="1" ViewCount="739" Body="&lt;p&gt;Some of you use ssh in the shell, but this does not work with elementary on a Tuxedo-Laptop. I tried to find the status of ssh, but this doesn' t show either. I tried to install putty - no success.&#xA;Could it be a deeper problem?&#xA;Any ideas?&lt;/p&gt;&#xA;" OwnerDisplayName="user10448" LastActivityDate="2017-07-20T17:42:03.230" Title="What if ssh does not work?" Tags="|updates|appcenter|shell|ssh|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12706" PostTypeId="1" CreationDate="2017-07-15T03:53:27.033" Score="0" ViewCount="395" Body="&lt;p&gt;When I use and external monitor on a MacBook Pro 2014 model (HDMI), unlocking the laptop requires that I lift the lid to type the password in because it is the only screen out of the two that will ever show the desktop manager (login or wake screen). This goes for both Pantheon and after installing Xubuntu-desktop package to see if it would be different with LightDM; it's not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Waking the laptop from sleep leaves both the laptop and external monitor blank, so a password cannot be entered; I've tried regardless to see if anything would happen; it doesn't do anything and I have to hold my power-button down to shut it off. I have tried both changing the primary displays and deactivating displays using Elementary OS's default stuff and using ARandR. Nothing seems to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought a lot of the early development for Elementary OS was done on a MacBook? It's why I chose Elementary. I've seen it on a lot of YouTube videos. Has no one tried an external monitor? A TV? I don't think the desktop managers (login screens) are using personal display settings and it is causing problems. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;90% of the time HDMI works just fine, I'm just getting tired of not having suspend as a working option or having to lift the lid to unlock the screen saver and type in the password because the DM doesn't talk to any personal settings. An external Keyboard will talk to the MacBook, but doesn't actually do anything but wake it up to a blank screen I can't get past.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have had both the default video drivers and have tried install NVIDIA stuff; it doesn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just someone please with Elementary on their MacBook try using an external monitor to at least see if it's just me or not.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastActivityDate="2019-04-08T21:01:15.207" Title="MacBook Pro 2014 and Loki external monitor issues" Tags="|release-loki|display|suspend|macbook|hdmi|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12707" PostTypeId="2" ParentId="9283" CreationDate="2017-07-15T04:10:00.110" Score="0" Body="&lt;p&gt;Add the KXStudio repository and install Catia for Jack connections. It's 1000x's easier to use than QJackCtrl. Besides, it is pretty much the repository that Ubuntu Studio relies on for its audio software updates. Get familiar with Audacity, Hydrogen drums, or ZynAddSubFX before doing anything complex like with Ardour. Guitarix is also a good choice for guitars and Bristrol for old-school synthesizer emulation. Hydrogen, Bristol, and ZynAddSubFX work with aconnect to get MIDI keyboard working if you don't want the headache of using Jack and just want to play around.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastEditorUserId="10526" LastEditDate="2017-07-15T04:16:36.200" LastActivityDate="2017-07-15T04:16:36.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12709" PostTypeId="2" ParentId="12706" CreationDate="2017-07-15T05:55:57.937" Score="1" Body="&lt;p&gt;I don't think this particular issue is hardware specific; I'd file an issue at github.com/elementary/pantheon-greeter.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-07-15T05:55:57.937" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12711" PostTypeId="2" ParentId="12701" CreationDate="2017-07-15T10:17:14.120" Score="0" Body="&lt;p&gt;A brief investigation indicates that this might be a caching problem: the view displays the tracks of the previously mounted cd initially, at least if they have the same name (e.g. Track 1.wav etc).  So mounting a CD with 13 tracks shows 13 tracks, ejecting and mounting CD with 6 tracks also shows 13 tracks until refreshed. Remounting the 13 track CD then shows 6 tracks until refreshed.  It sounds as if it may be related to this issue:&lt;a href=&quot;https://github.com/elementary/files/issues/36&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/36&lt;/a&gt;, but it would be worth raising an separate issue on GitHub&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-07-15T10:17:14.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12712" PostTypeId="2" ParentId="12611" CreationDate="2017-07-15T10:17:41.317" Score="1" Body="&lt;p&gt;Which driver did you try? There's quite a few details missing here so you'll have to be a bit more descriptive. From a quick scan of &lt;a href=&quot;http://support.amd.com/en-us/download/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;AMD's closed source driver page&lt;/a&gt;, they ended support for 5000 series cards with 15.04. If it's the open source driver you're looking for, it should have been installed by default with Loki. Can you post the output of &lt;code&gt;lspci -k | grep -EA2 'VGA|Display'&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="10531" LastActivityDate="2017-07-15T10:17:41.317" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12715" PostTypeId="2" ParentId="12664" CreationDate="2017-07-15T18:27:33.123" Score="0" Body="&lt;p&gt;&lt;strong&gt;Update.&lt;/strong&gt; I uninstalled and reinstalled Elementary Loki in my laptop, installed TeXLive 2017 (instead of TeXLive 2015 which is the version that appears in the repositories),... and the same issue happened again. My laptop crashed in the same way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seemed that using Gedit and by compiling in the command line it worked properly. I installed TeXStudio, and I even by forcing it I couldn't make it crash. It had to be TeXMaker... . Also, it only crashed when I made a quick build.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thing is, my laptop is a Lenovo, and in order to compile quick I have to press Fn+F1. After adding a keyboard, I realized that it didn't crashed with it. So here you have. The problem came because I have to press Fn+F1 (funny thing, because in TeXStudio I had to press Fn+F6 and it worked).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution.&lt;/strong&gt; I only had to change the &quot;HotKey&quot; Lenovo has in its laptops. It can be seen how to change the F1 key so you only have to press the F1 key instead Fn+F1 &lt;a href=&quot;https://support.lenovo.com/ec/en/solutions/ht072691&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4767" LastActivityDate="2017-07-15T18:27:33.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12716" PostTypeId="1" CreationDate="2017-07-15T19:24:12.670" Score="0" ViewCount="194" Body="&lt;p&gt;I'm looking for a cheap board like Raspberry Pi (which sadly, is not compatible with elementary OS) that is powerful enough to use elementary OS, play 1080p 60hz videos and movies without a lag, and surf the web properly. I will not play any games or do anything else except for these. So, I don't want to build an expensive PC. I've been searching for a board for a while but am unable to find one that is capable of running elementary OS. I'd appreciate some suggestions.&lt;/p&gt;&#xA;" OwnerUserId="7363" LastEditorUserId="8517" LastEditDate="2018-11-30T20:08:44.633" LastActivityDate="2018-11-30T20:08:44.633" Title="Which single-board computer can I use elementary OS with?" Tags="|hardware|" AnswerCount="1" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12720" PostTypeId="2" ParentId="12666" CreationDate="2017-07-16T04:12:49.013" Score="1" Body="&lt;p&gt;The most recent system update as of mid July 2017 in appcenter seems to partially fix the application problems; as I suspected the gtk-warning/error have now been removed.&lt;br&gt;&#xA;This allowed me to open apps which previously crashed such as Libreoffice and Skrooge. However, system slowdowns and lockups persisted. If you read the issues in my OP you would see I have SSD only (with limited RAM of 2Gb). It is not recommended for SSD to use swapfile but if you are suffering from similar problems reported here try this in terminal (or use synaptic): &lt;code&gt;sudo apt-get install swapspace&lt;/code&gt;&lt;br&gt;&#xA;&lt;a href=&quot;http://www.hecticgeek.com/2012/01/automatic-virtual-swap-space-creator-ubuntu-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;swapspace info&lt;/a&gt;&lt;br&gt;&#xA;To improve further if you have limited RAM and using SSD only, I also recommend making a ZRAM script which reduces write to swapspace files considerably, and doesn't seem to slow the system.&lt;br&gt;&#xA;&lt;a href=&quot;https://wiki.debian.org/ZRam&quot; rel=&quot;nofollow noreferrer&quot;&gt;ZRAM script wiki&lt;/a&gt;  &lt;/p&gt;&#xA;" OwnerUserId="1127" LastEditorUserId="16827" LastEditDate="2019-04-16T14:34:48.423" LastActivityDate="2019-04-16T14:34:48.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12721" PostTypeId="1" CreationDate="2017-07-16T07:54:37.923" Score="0" ViewCount="423" Body="&lt;p&gt;Is there a way to get &lt;em&gt;M-Audio &lt;strong&gt;Jamlab&lt;/strong&gt;&lt;/em&gt; working with LMMS and / or Ubuntu Studio in elementary OS?&#xA;I haven't found an appropriate driver yet...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I'm on a Macbook (3,1 - late 2007).&lt;/p&gt;&#xA;" OwnerUserId="10538" LastEditorUserId="26" LastEditDate="2017-07-26T14:10:22.133" LastActivityDate="2019-12-15T03:13:29.737" Title="M-Audio Jamlab &amp; LMMS / Ubuntu Studio" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12723" PostTypeId="1" CreationDate="2017-07-16T12:51:50.327" Score="0" ViewCount="124" Body="&lt;p&gt;I get this error message during installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XI9nV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XI9nV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10527" LastActivityDate="2024-03-16T03:07:10.817" Title="Error during ati radeon x600 driver" Tags="|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12726" PostTypeId="2" ParentId="12723" CreationDate="2017-07-16T20:29:15.710" Score="0" Body="&lt;p&gt;Don't worry about installing the AMD graphics drivers. The open source drivers that come with Elementary OS are the best AMD graphics drivers. What you are trying to install is too old and no longer supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may also update your kernel and see how that works for you. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alright, buckle up your big boy pants because you are going balls deep today!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We get to play with the terminal. This guide is made assuming that you can get to the terminal [(edit) and the Desktop GUI.] Here is a list of commands that will set you up and upgrade your kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:teejee2008/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now go ahead and use UKUU to update the kernel to 4.11.3&lt;/li&gt;&#xA;&lt;li&gt;It will say that there are errors the first time you try this, ignore&#xA;that.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer.&lt;/li&gt;&#xA;&lt;li&gt;Go back to UKUU and reinstall 4.11.3 kernel&lt;/li&gt;&#xA;&lt;li&gt;If the install was successful, go ahead and restart your computer&#xA;again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge ukuu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you only have access to the terminal use this advice given from Lemonslice&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a &lt;strong&gt;workaround&lt;/strong&gt;, you might want to try to install 4.11 from the Ubuntu mainline kernels. &#xA;You can download and install from &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.11.4/&lt;/a&gt; the following packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install linux-headers-4.11.4-041104_4.11.4-041104.201706071003_all.deb \&#xA;linux-headers-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb \&#xA;linux-image-4.11.4-041104-generic_4.11.4-041104.201706071003_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now restart your computer when your kernel is installed and continue on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-toolchain-r/test&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gcc-6 g++-6&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now reboot your computer again for good measure.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;When you computer has restarted go ahead and run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Say yes to any prompts.&lt;/li&gt;&#xA;&lt;li&gt;Reboot your computer and now try your multimedia keys and possibly&#xA;your video drivers.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have to do this for my laptop and desktop for it to fully function. The 4.11.3 kernel is really good and has not given me issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So yeah, it seems like a lot, you can do it. Have confidence!&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-07-19T21:35:28.417" LastActivityDate="2017-07-19T21:35:28.417" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12727" PostTypeId="2" ParentId="11254" CreationDate="2017-07-17T02:23:34.967" Score="1" Body="&lt;p&gt;For me, recovery mode is automatic if the hard drive is blank and will try to talk to Apple via a network connection to install MacOS, run Disk Utility, Terminal, etc., though it takes a while. You should also be able to enter recovery mode by holding down Command+R at system start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All rEFInd or rEFIt do is save you the time of having to hold down the Option key at system start in order to choose the proper partition/hard drive/DVD to boot from. You should be able to choose MacOS from that menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried clearing your NVRAM? &lt;a href=&quot;https://support.apple.com/en-us/HT204063&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.apple.com/en-us/HT204063&lt;/a&gt;. It's helped me a few times, for whatever reason, when my MacBook wants to act like an ass.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastActivityDate="2017-07-17T02:23:34.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12728" PostTypeId="2" ParentId="12706" CreationDate="2017-07-17T07:35:56.470" Score="0" Body="&lt;p&gt;Try this tutorial, see if it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Fixing Suspend Kernel Bug&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/@racter/how-to-install-ubuntu-16-04-on-a-retina-macbook-11-2-74e7779c0e47&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@racter/how-to-install-ubuntu-16-04-on-a-retina-macbook-11-2-74e7779c0e47&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2017-07-17T07:35:56.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12729" PostTypeId="1" CreationDate="2017-07-17T14:39:27.817" Score="1" ViewCount="43" Body="&lt;p&gt;Basically, as above. Haven't been able to get an Appcenter purchase to go through in a bit now. Get the error attached. Used to work fine. Any ideas? Payment source definitely has enough money.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PDaPB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PDaPB.png&quot; alt=&quot;Appcenter Payment Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10547" LastActivityDate="2018-01-28T09:50:09.233" Title="Can't Get Payment to Go Through In the Last Week or So" Tags="|appcenter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12730" PostTypeId="1" CreationDate="2017-07-17T19:00:19.163" Score="0" ViewCount="243" Body="&lt;p&gt;I think this is a bug. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I put my system on lock screen, OS turns off my primary monitor, and turns on the other monitor that I disabled. When I unlock the system, normal settings turned back on. The whole thing is super awkward. You can see my display setting below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7f7Li.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7f7Li.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Grey monitor should be off, but it becomes primary monitor after screen is locked.&lt;/p&gt;&#xA;" OwnerUserId="10548" LastActivityDate="2019-12-07T05:00:50.167" Title="Monitor switches when on lock" Tags="|display|" AnswerCount="1" CommentCount="0" ClosedDate="2019-12-07T07:11:18.427" ContentLicense="CC BY-SA 3.0" />
  <row Id="12731" PostTypeId="1" CreationDate="2017-07-17T19:16:35.323" Score="0" ViewCount="381" Body="&lt;p&gt;I'm new in Linux and ElementaryOS world, so I'm a little noob&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a HP 250 G3, and I installed ElementaryOS in dual boot with WIndows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem regards WiFi connection: even if &quot;Wireless&quot; is set on active (in the menu on the top right), it doesn't find any access point; furthermode if I go on settings --&gt; network and select Wireless, it results as &quot;Wireless is deactivated&quot;.&#xA;With the LAN connection everything works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it may be a problem with network driver. &#xA;The Network Board is a &quot;Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone knows how can I fix it? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="10549" LastActivityDate="2024-03-15T04:08:46.053" Title="Wireless problem (it results always disabled)" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12733" PostTypeId="1" CreationDate="2017-07-18T01:20:39.843" Score="0" ViewCount="713" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9ubqI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hey guys. So I load up my laptop this morning and elementary isn't loading anything other than my wallpaper as seen in the photo. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't access the dock at all, however I can mouse over ares of the taskbar where say for example the battery status icon and shutdown features are, but I can not access any apps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I attempted an update through the termial (alt,ctrl,f1) and sat throughout the update process and rebooted. Unfortunately, I still having the same problem of the desktop not loading.&lt;/p&gt;&#xA;" OwnerUserId="10552" LastActivityDate="2017-07-18T13:22:37.370" Title="Elementary OS will not load at" Tags="|desktop|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12736" PostTypeId="2" ParentId="12731" CreationDate="2017-07-18T07:35:14.417" Score="0" Body="&lt;p&gt;Check if it's blocked on the software level with &lt;code&gt;rfkill&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check &lt;a href=&quot;https://askubuntu.com/questions/829863/wi-fi-drivers-for-laptop-xiaomi-air-13&quot;&gt;this&lt;/a&gt; answer out. I guess it'll help you too.&lt;/p&gt;&#xA;" OwnerUserId="10555" LastActivityDate="2017-07-18T07:35:14.417" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12737" PostTypeId="2" ParentId="12733" CreationDate="2017-07-18T11:47:21.610" Score="1" Body="&lt;p&gt;This is likely a duplicate of a duplicate. It's related to a known bug. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since you can't access anything type Ctrl+Alt+T to open the terminal and enter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11330/pantheon-desktop-takes-a-long-time-to-load/11332#11332&quot;&gt;pantheon desktop takes a long time to load&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-07-18T13:22:37.370" LastActivityDate="2017-07-18T13:22:37.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12738" PostTypeId="1" CreationDate="2017-07-18T15:07:26.147" Score="1" ViewCount="40" Body="&lt;p&gt;I am running the latest Elementary o/s (as of this writing), my situation is that I am a software developer and still need Windows to be accessible while remote.  I have a Windows 10 VM set up using VMWare workstation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My issue is that when I attempt to RDC remotely, I can connect to the VM, but the screen is black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The ONLY way i have been able to remedy this is by using TeamViewer, logging in remotely, then doing RDC to the Windows VM again. Also, i seem to have the same issue with vnc4server (remote in just gives me black screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying desperately to replace my default Windows machine with Elementary, any thoughts on how can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks :-)&lt;/p&gt;&#xA;" OwnerUserId="8597" LastEditorUserId="8597" LastEditDate="2017-07-18T16:10:08.933" LastActivityDate="2017-07-18T16:10:08.933" Title="Cannot access VM unless logged into Elementary (get blank screen)" Tags="|virtualization|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12740" PostTypeId="2" ParentId="12721" CreationDate="2017-07-18T21:44:43.203" Score="1" Body="&lt;p&gt;To get guitars or other &lt;strong&gt;&quot;non-digital&quot; (MIDI)&lt;/strong&gt; equipment working with Linux, you will need to learn how to use JACK. Using a program called &lt;strong&gt;Catia&lt;/strong&gt; from the &lt;strong&gt;KXStudio repository&lt;/strong&gt; is much much easier than &lt;strong&gt;QJackCtl&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will also need to make sure &lt;code&gt;pavucontrol&lt;/code&gt; and &lt;code&gt;pulseaudio-module-jack&lt;/code&gt; is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My favorite cable so far has been a &lt;strong&gt;Rocksmith USB guitar cable&lt;/strong&gt;, though they go out after regular use in a few months. Buying any audio cable with an LED light on it doesn't make any sense to me (buzzing).&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Quick disclaimer&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You may not be able to get &lt;strong&gt;LMMS&lt;/strong&gt; working with JACK since I think it is technically dependent on &lt;strong&gt;Wine&lt;/strong&gt; to work. If not, and still want to record, you could still try &lt;strong&gt;Ardour&lt;/strong&gt; or &lt;strong&gt;Audacity&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;strong&gt;PulseAudio Volume Control&lt;/strong&gt; (&lt;code&gt;pavucontrol&lt;/code&gt;) and look under configuration and make sure the &lt;strong&gt;USB M-Audio JamLab device&lt;/strong&gt; is set to input only &lt;em&gt;(I doubt you'll get both in/out working)&lt;/em&gt;. Then, go to Input Devices tab and make sure JamLab device is the one being used. Go to &lt;strong&gt;Output Devices&lt;/strong&gt; tab and make sure audio is going to the headphones or whatever you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Open Catia&lt;/strong&gt; --&gt; &lt;strong&gt;Tools&lt;/strong&gt; --&gt; &lt;strong&gt;Jack Server&lt;/strong&gt; --&gt; &lt;strong&gt;Configure Jack&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &lt;strong&gt;Duplex Mode&lt;/strong&gt; and make sure the &lt;strong&gt;Input Device&lt;/strong&gt; and the &lt;strong&gt;Output Devices&lt;/strong&gt; are correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click &lt;strong&gt;OK&lt;/strong&gt;, &lt;strong&gt;Next&lt;/strong&gt;, go to &lt;strong&gt;Tools&lt;/strong&gt; --&gt; &lt;strong&gt;Jack Server&lt;/strong&gt; --&gt; &lt;strong&gt;Start Jack Server&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the applications you want to use &lt;strong&gt;Catia&lt;/strong&gt; to pipe audio through. Linux has programs like &lt;strong&gt;Guitarix&lt;/strong&gt; and &lt;strong&gt;Rakarrack&lt;/strong&gt; for guitar. You move the virtual cables in &lt;strong&gt;Catia&lt;/strong&gt; around to make connections. &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;BE AWARE&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;That just because you stop the Jack server, you will also have to run &lt;code&gt;killall jack&lt;/code&gt; or use &lt;code&gt;htop&lt;/code&gt; to find and stop the process. If your audio still acts funny afterwards, try &lt;code&gt;killall pulseaudio&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your are kind of lucky, even though you have an older MacBook, because I have a newer one with an actual HDMI port &lt;em&gt;(so video and audio)&lt;/em&gt;, and it has been nothing but hell trying to get Jack and PulseAudio to work properly. I have to kill &lt;code&gt;pulseaudio&lt;/code&gt; to get it to reset just for normal things like Kodi or Firefox videos sometimes. And, sometimes my HDMI as an option disappears all together. If you plan to buy a newer laptop soon for Linux-only and want an actual HDMI port, don't get an Apple.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastEditorUserId="19360" LastEditDate="2019-12-15T03:13:29.737" LastActivityDate="2019-12-15T03:13:29.737" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="12741" PostTypeId="2" ParentId="12624" CreationDate="2017-07-18T21:46:53.650" Score="0" Body="&lt;p&gt;I have tried again, a new installation, this time install the Sparky distribution with the Pantheon desktop, that is, Elementary .... And it has happened to me exactly the same, Has been to modify a file as root using Pantheon Files like a &quot;New Window as Administrator&quot; option, and The system fails again with the same problems discussed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems clear that the problem comes from the heart of Elementary, the Sparky distribution is Debian + Elementary, and still has the same bug as the original Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will I expect a new version of Elementary, does anyone know by when?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="10422" LastActivityDate="2017-07-18T21:46:53.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12742" PostTypeId="2" ParentId="12730" CreationDate="2017-07-18T21:54:24.943" Score="1" Body="&lt;p&gt;I have a quick &quot;workaround&quot; that might work for you; install xscreensaver. When I lock my screen now, it uses xscreensaver instead of Pantheon's stuff and doesn't try to go to the LightDM screen, to which I don't think it's saving any personal display settings between the desktop and the greeter and is causing a lot of problems for people.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastActivityDate="2017-07-18T21:54:24.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12743" PostTypeId="2" ParentId="12619" CreationDate="2017-07-18T22:01:50.887" Score="1" Body="&lt;p&gt;I'm not sure if this will help, but lightdm-gtk-greeter-settings package might work, then again it might also change the whole thing since I'm pretty sure the greeter is a customized version of the normal LightDM but for Pantheon. Also, there may be a setting you could tweak with dconf-editor.&lt;/p&gt;&#xA;" OwnerUserId="10526" LastActivityDate="2017-07-18T22:01:50.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12745" PostTypeId="2" ParentId="373" CreationDate="2017-07-18T22:09:12.907" Score="8" Body="&lt;p&gt;Edit &lt;code&gt;/etc/lightdm/pantheon-greeter.conf&lt;/code&gt; (in newer versions &lt;code&gt;io.elementary.greeter.conf&lt;/code&gt;) with you favorite editor and remove the &lt;code&gt;#&lt;/code&gt; on the line &lt;code&gt;activate-numlock=true&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8404" LastEditorUserId="19079" LastEditDate="2019-09-26T18:38:04.317" LastActivityDate="2019-09-26T18:38:04.317" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="12746" PostTypeId="2" ParentId="12642" CreationDate="2017-07-18T22:32:40.500" Score="1" Body="&lt;p&gt;No, there is no need to remove mesa before installing AMD's driver. And the answer by Suditu George is almost completely incorrect. AMD &lt;strong&gt;does&lt;/strong&gt; provide drivers for 16.04 in the form of AMDGPU-PRO.&lt;/p&gt;&#xA;" OwnerUserId="10531" LastActivityDate="2017-07-18T22:32:40.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12747" PostTypeId="1" CreationDate="2017-07-19T06:27:07.607" Score="0" ViewCount="180" Body="&lt;p&gt;Where is the file that handles camera raw thumbnails in Files? I want to add a mimetype (image/x-sigma-x3f) and see what other adjustments I can make. (I don't think it's the file &lt;code&gt;/usr/share/thumbnailers/evince.thumbnailer&lt;/code&gt;.)&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2024-03-17T06:05:00.630" Title="File that handles raw thumbnails in Files" Tags="|release-loki|files|mimetype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12749" PostTypeId="2" ParentId="8405" CreationDate="2017-07-19T15:22:14.253" Score="0" Body="&lt;p&gt;&lt;a href=&quot;http://entornosgnulinux.com/2015/05/16/compiz-en-elementary-os-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; are instructions for Freya, but worth a try in Loki.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-19T15:22:14.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12750" PostTypeId="2" ParentId="12019" CreationDate="2017-07-19T17:09:54.590" Score="2" Body="&lt;p&gt;Just check a few things.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Enter BIOS and disable Secure boot&lt;/li&gt;&#xA;&lt;li&gt;Enable USB boot&lt;/li&gt;&#xA;&lt;li&gt;Set Boot Priority to USB by default&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Installation:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot your USB and complete basic setup until you reach partition manager. Select the last option &quot;Something else&quot; to proceed with partition manager.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In partition manager,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Select free space, and create a primary 20000MB partition as root denoted by / marked at beginning of space.&lt;/li&gt;&#xA;&lt;li&gt;Select free space, and create a logical 4000MB partition as swap area from dropdown marked at beginning of space.&lt;/li&gt;&#xA;&lt;li&gt;Select free space, and create remaining space as a logical partition for home denoted by /home marked at beginning of space.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;IMPORTANT..! Select the Windows Boot manager partition (EFI) from the drop down at the end of partition of table. And then click INSTALL.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click Next and complete the setup. You will recieve a dialog box as REBOOT once installation completes. Just reboot and unplug your USB media.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Enjoy Elementary Loki..!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;IF IT STILL ENTERS INTO WINDOWS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter into BIOS and change the order of OS Boot manager to Ubuntu/Elementary as default. It should now load the Linux grub loader.&lt;/p&gt;&#xA;" OwnerUserId="10573" LastActivityDate="2017-07-19T17:09:54.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12754" PostTypeId="1" CreationDate="2017-07-19T23:45:33.367" Score="5" ViewCount="257" Body="&lt;p&gt;I have said all in the title, I have programed a few scripts in perl to personalize the desktop a bit, and I'd like to share it with others because isn't enough programs to do this stuff.&lt;/p&gt;&#xA;" OwnerUserId="10576" LastActivityDate="2018-09-13T14:00:54.823" Title="Im an amateur depelover, where can i share my small tricks for elementary os loki?" Tags="|release-loki|desktop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12755" PostTypeId="2" ParentId="12754" CreationDate="2017-07-19T23:48:37.117" Score="1" Body="&lt;p&gt;You should consider building apps for the App Center. If you have scripts you'd like to share you can share them on GitHub Gist. I have an elementary install script on there and it's saved me a ton of time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check out the &lt;a href=&quot;https://elementary.io/docs/code/getting-started#gtk-application&quot; rel=&quot;nofollow noreferrer&quot;&gt;Getting Started&lt;/a&gt; guide written by the elementary developers. Also check out Egee's &lt;a href=&quot;https://www.youtube.com/watch?v=vxvZGf69nko&quot; rel=&quot;nofollow noreferrer&quot;&gt;videos&lt;/a&gt; on getting started with GTK &amp;amp; Vala development in elementary. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2018-05-16T11:38:10.763" LastActivityDate="2018-05-16T11:38:10.763" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12756" PostTypeId="2" ParentId="12747" CreationDate="2017-07-19T23:55:35.747" Score="0" Body="&lt;p&gt;Maybe a hint for you, I have just been reading &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9495/6445&quot;&gt;this answer&lt;/a&gt; explaining how to enable/disable thumbnails by editing the file etc/xdg/tumbler/tumbler.rc&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In that file you can see that file types (uri-scheme / mime-type combination) are managed by plugins... &lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2017-07-19T23:55:35.747" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12758" PostTypeId="1" AcceptedAnswerId="12772" CreationDate="2017-07-20T00:51:29.063" Score="1" ViewCount="542" Body="&lt;p&gt;I am unable to login back to my os. and yes, I am using the correct password. whenever I login it shows black screen like it is logging me in and then it shows the password prompt again.&#xA;after spending considerable time looking though this website and searching for an answer to this question, I did most of the things mentioned as a possible solution to this question but nothing worked.&#xA;also, I was able to create a new admin account which is working fine and I am able to login to this but I am still unable to login to my main account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;from what I remember, the only thing that I updated from the app center was Microcode update, which was an update from intel.&#xA;I was thinking to uninstall that but I am worried that it might break the system?&#xA;as I don't know how to roll back to the last version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what all things I have done so far :-&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;reinstalled elementary-desktop&lt;/li&gt;&#xA;&lt;li&gt;reinstalled pantheon-greeter&lt;/li&gt;&#xA;&lt;li&gt;checked the permissions and ownership of .Xauthority, The ownership is correct.&lt;/li&gt;&#xA;&lt;li&gt;restarted lightdm service&lt;/li&gt;&#xA;&lt;li&gt;after upgrading apt-get, i installed xserver-xorg.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Edit1 :&#xA;on this topic below, the person was able to resolve the issue after reinstalling elementary-tweaks and numix-icon.&#xA;but I don't have either of them installed on my os. :((&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2568/i-cant-login-return-to-login-screen-it-isnt-xauthority&quot;&gt;I can&amp;#39;t login , return to login screen (it isn&amp;#39;t Xauthority)&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10578" LastEditorUserId="10578" LastEditDate="2017-07-20T01:11:35.187" LastActivityDate="2017-11-19T03:37:59.887" Title="can't log back in to Elementary OS 0.4.1 Loki 64bit" Tags="|release-loki|system-installation|pantheon-files|greeter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12759" PostTypeId="1" CreationDate="2017-07-20T01:25:53.120" Score="0" ViewCount="350" Body="&lt;p&gt;My question is will elementary run on a Centrino 2 duo core @ 2000 Mhz?&lt;/p&gt;&#xA;" OwnerUserId="10579" LastActivityDate="2017-07-20T14:43:43.827" Title="will elementary run on a Centrino 2 duo core @ 2000 Mhz?" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ClosedDate="2017-07-26T13:54:56.833" ContentLicense="CC BY-SA 3.0" />
  <row Id="12762" PostTypeId="2" ParentId="12759" CreationDate="2017-07-20T14:43:43.827" Score="1" Body="&lt;p&gt;Yes you should be able to. I recently replaced chromOS on the Acer chromebook 14 and it hasn't had any problems running simple tasks. This machine has the Celeron N3160 which runs at 1.6GHz. I have not done anything very system intensive to see if there are any problems but the OS animations all run smooth and the CPU doesn't seem to be struggling and heating up. Hope this helps. &lt;/p&gt;&#xA;" OwnerUserId="10585" LastActivityDate="2017-07-20T14:43:43.827" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12763" PostTypeId="2" ParentId="12654" CreationDate="2017-07-20T17:14:11.733" Score="-1" Body="&lt;p&gt;Also ich würde komplett neu installieren. Außerdem auf alle ppas verzichten.Benutze selbst elementary seit Luna auf 4 Rechnern 3 HP + 1 Mac mini sicher es hat seine kleinen Macken aber im großen und ganzen äußerster &#xA;stabil. 1.neues ISO herunterladen mit Etcher USB-Stick beschreiben. Partitionieren normal. Nach Installation aktualisieren dann erst Sprachpakete bearbeiten.Eigentlich müsste es ohne besondere Mühe dann tadellos laufen.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tranlated to English: &#xA;So I would completely reinstall. In addition, on all ppas dispense. Use self elementary since Luna on 4 calculators 3 HP + 1 Mac mini secure it has its small quirks but on the whole extreme stable. 1.download new ISO with another USB-stick. Partitioning normally. After installation update then only language packages to edit. It would really have to run without special effort then perfectly.     &lt;/p&gt;&#xA;" OwnerUserId="10588" LastEditorUserId="7492" LastEditDate="2017-07-21T11:51:10.223" LastActivityDate="2017-07-21T11:51:10.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12764" PostTypeId="2" ParentId="12703" CreationDate="2017-07-20T17:42:03.230" Score="1" Body="&lt;p&gt;Make sure you got the right connection information. This is not a system error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More information about SSH and how to use it: &lt;a href=&quot;https://wiki.archlinux.org/index.php/Secure_Shell#Client_usage&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Secure_Shell#Client_usage&lt;/a&gt;&#xA;(ArchLinux wiki. Excellent documentation)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to add a PublicKey to connect (As the error message suggest) and you're unaware of it, you should try contacting your hosting provider for support.&lt;/p&gt;&#xA;" OwnerUserId="10589" LastActivityDate="2017-07-20T17:42:03.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12766" PostTypeId="1" CreationDate="2017-07-20T22:24:32.477" Score="1" ViewCount="152" Body="&lt;p&gt;I used the right-click menu on a Windows 10 computer in order to share a folder on my local network. I set that share to &quot;Everyone&quot; and also disabled password-protected sharing via the Windows Control Panel. But when I'm trying to open it from pantheon-files, this happens:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/dTLL9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dTLL9.png&quot; alt=&quot;pantheon-files asking for a password&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can open the folder using the Windows 10 username and password, but since I'm not the owner of this Windows machine, I would like to know how to setup this share in order to open it without entering a password. Can something be done on the elementary side?&lt;/p&gt;&#xA;" OwnerUserId="10592" LastActivityDate="2017-07-20T22:24:32.477" Title="Pantheon-files asks me for a password to access unprotected SMB shares" Tags="|pantheon-files|microsoft-windows|samba|sharing|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12768" PostTypeId="2" ParentId="8699" CreationDate="2017-07-21T06:39:08.567" Score="1" Body="&lt;p&gt;This is definitely because of an elementary OS / Photos specific GTK styling snippet missing in your 3rd party theme. (So not an elementary OS or Photos issue but a theme issue.) I had the same issue and solved it as following:&#xA; Copy this snippet into your theme: /.themes (or usr/share/themes) &gt; &lt;em&gt;your theme&lt;/em&gt; &gt; GTK-3.18 (or just GTK-3 if there is no version specific folder) &gt; gtk.css AND gtk-dark.css.&#xA;I put it after the first closing winged bracket.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;... } &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/**********&#xA; * Photos *&#xA; *********/&#xA;&#xA;.checkerboard-layout {&#xA;    background-color: #383e41;&#xA;    background-image:&#xA;        linear-gradient(&#xA;            45deg,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            ) 25%,&#xA;            transparent 25%,&#xA;            transparent 75%,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            ) 75%,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            )&#xA;        ),&#xA;        linear-gradient(&#xA;            45deg,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            ) 25%,&#xA;            transparent 25%,&#xA;            transparent 75%,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            ) 75%,&#xA;            alpha (&#xA;                #000,&#xA;                0.1&#xA;            )&#xA;        );&#xA;    background-size: 24px 24px;&#xA;    background-position: 0 0, 12px 12px;&#xA;}&#xA;&#xA;.checkboard-layout .item {&#xA;    background-color: #eee;&#xA;}&#xA;&#xA;/* end Photos snippet */&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2017-07-21T06:39:08.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12769" PostTypeId="2" ParentId="7392" CreationDate="2017-07-21T13:58:19.317" Score="1" Body="&lt;p&gt;This work for me;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See there is your Bluetooth is blocked and then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rfkill unblock bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10598" LastActivityDate="2017-07-21T13:58:19.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12770" PostTypeId="1" AcceptedAnswerId="12771" CreationDate="2017-07-21T16:26:01.453" Score="0" ViewCount="703" Body="&lt;p&gt;I have install Popcorn Time from the website and create a Desktop Entry to ~/.local/share/applications and on ~/usr/share/applications for show it on the menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bue when I execute still getting and blur icon and duplicate for the one I have on dock.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type = Application&#xA;Encoding=UTF-8&#xA;Name = Popcorn Time&#xA;Comment = Comment on the program&#xA;Exec = /home/kevin/popcorntime/Popcorn-Time&#xA;Icon = /home/kevin/popcorntime/src/app/images/icon.png&#xA;Terminal = false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UAgt3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UAgt3.png&quot; alt=&quot;That one says Butter&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm thinking that maybe is there another execute because even has another name when the mouse is hovering the icon&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS Loki.&lt;/p&gt;&#xA;" OwnerUserId="10586" LastActivityDate="2018-08-14T09:10:15.413" Title="Popcorn Time icon duplicate on plank" Tags="|release-loki|plank|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12771" PostTypeId="2" ParentId="12770" CreationDate="2017-07-21T16:45:20.470" Score="0" Body="&lt;p&gt;You need to add a StartupWMClass line to your desktop file. To identify what value to put there run in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xprop WM_CLASS &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then click on your Popcorn Time .desktop file copy the terminal output and place it after StartupWMClass=&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an example using Gnome Terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;StartupWMClass= &quot;gnome-terminal&quot;, &quot;Gnome-terminal&quot;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-21T16:45:20.470" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12772" PostTypeId="2" ParentId="12758" CreationDate="2017-07-21T22:04:37.463" Score="0" Body="&lt;p&gt;after spending nearly 4 days trying to figure out this issue and trying to resolve it. I figured it out.&#xA;It seems the issue was coming from my dconf user file.&#xA;it is the file that contains configuration data for dconf.&#xA;I renamed it and now it is all working fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank u all for whatever help u provided, really appreciate it. thanks. &lt;/p&gt;&#xA;" OwnerUserId="10578" LastActivityDate="2017-07-21T22:04:37.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12773" PostTypeId="2" ParentId="7965" CreationDate="2017-07-21T22:17:01.583" Score="0" Body="&lt;p&gt;google-drive-ocamlfuse integrates your google drive (and photos of course) with your desktop. It works perfectly fine and is free. However you would have to import the pics into pantheon-photos. (no direct integration).&#xA;How to set it up is explained in detail here (or google it):&#xA;&lt;a href=&quot;http://www.webupd8.org/2013/09/mount-google-drive-in-linux-with-google.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.webupd8.org/2013/09/mount-google-drive-in-linux-with-google.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2017-07-21T22:17:01.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12775" PostTypeId="2" ParentId="11626" CreationDate="2017-07-22T08:30:54.300" Score="1" Body="&lt;p&gt;For anyone else suffering from this issue, it got resolved after I uninstalled all the proprietary drivers for the Ethernet and used only the free ones.  &lt;/p&gt;&#xA;" OwnerUserId="9454" LastActivityDate="2017-07-22T08:30:54.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12776" PostTypeId="1" CreationDate="2017-07-22T13:51:53.010" Score="0" ViewCount="302" Body="&lt;p&gt;I wrote a simple bash script to keep my system updated, and put it on a crontab to execute @reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(sudo  apt-get update) &amp;gt;&amp;gt; /home/raphael/Documents/Logs/updateLogs.txt&#xA;(sudo  apt-get upgrade -y) &amp;gt;&amp;gt; /home/raphael/Documents/Logs/updateLogs.txt&#xA;(sudo apt autoremove -y) &amp;gt;&amp;gt; /home/raphael/Documents/Logs/updateLogs.txt&#xA;(sudo date ) &amp;gt;&amp;gt; /home/raphael/Documents/Logs/updateLogs.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, every time I check the &lt;code&gt;updateLogs.txt&lt;/code&gt; file I encounter these errors: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:1 http://packages.microsoft.com/repos/vscode stable InRelease&#xA;  Temporary failure resolving 'packages.microsoft.com'&#xA;Err:2 http://br.archive.ubuntu.com/ubuntu xenial InRelease&#xA;  Temporary failure resolving 'br.archive.ubuntu.com'&#xA;Err:3 http://br.archive.ubuntu.com/ubuntu xenial-updates InRelease&#xA;  Temporary failure resolving 'br.archive.ubuntu.com'&#xA;Err:4 http://br.archive.ubuntu.com/ubuntu xenial-backports InRelease&#xA;  Temporary failure resolving 'br.archive.ubuntu.com'&#xA;Err:5 http://security.ubuntu.com/ubuntu xenial-security InRelease&#xA;  Temporary failure resolving 'security.ubuntu.com'&#xA;Err:6 http://packages.elementary.io/appcenter xenial InRelease&#xA;  Temporary failure resolving 'packages.elementary.io'&#xA;Err:7 http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu xenial InRelease&#xA;  Temporary failure resolving 'ppa.launchpad.net'&#xA;Err:8 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;  Temporary failure resolving 'ppa.launchpad.net'&#xA;Err:9 http://ppa.launchpad.net/papirus/papirus/ubuntu xenial InRelease&#xA;  Temporary failure resolving 'ppa.launchpad.net'&#xA;Err:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease&#xA;  Temporary failure resolving 'ppa.launchpad.net'&#xA;Err:11 http://dl.google.com/linux/chrome/deb stable InRelease&#xA;  Temporary failure resolving 'dl.google.com'&#xA;Err:12 http://repository.spotify.com stable InRelease&#xA;  Temporary failure resolving 'repository.spotify.com'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If I run manually the script I get the expected results:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://br.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://br.archive.ubuntu.com/ubuntu xenial-updates InRelease&#xA;Get:3 http://br.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]&#xA;Ign:4 http://dl.google.com/linux/chrome/deb stable InRelease&#xA;Hit:5 http://repository.spotify.com stable InRelease&#xA;Hit:6 http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu xenial InRelease&#xA;Hit:7 http://dl.google.com/linux/chrome/deb stable Release&#xA;Hit:8 http://packages.microsoft.com/repos/vscode stable InRelease&#xA;Hit:10 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Hit:11 http://ppa.launchpad.net/papirus/papirus/ubuntu xenial InRelease&#xA;Hit:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease&#xA;Hit:13 http://packages.elementary.io/appcenter xenial InRelease&#xA;Get:14 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]&#xA;Fetched 204 kB in 5s (38,6 kB/s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At first I thought it was a wi-fi problem, so I put an Ethernet cable in my notebook, but I got the same results. Any thoughts on why this happens?&lt;/p&gt;&#xA;" OwnerUserId="11605" LastEditorUserId="242" LastEditDate="2017-08-21T18:50:20.870" LastActivityDate="2017-08-21T18:50:20.870" Title="Problem with apt-get update in crontab @reboot" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12777" PostTypeId="2" ParentId="12776" CreationDate="2017-07-22T16:30:59.083" Score="1" Body="&lt;p&gt;Try to &quot;wait&quot; a bit before running &lt;code&gt;apt update&lt;/code&gt;. You can empirically find optimal time to &lt;code&gt;sleep&lt;/code&gt;, or you can use this code from this &lt;a href=&quot;https://askubuntu.com/a/3304/639545&quot;&gt;post&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;function check_online&#xA;{&#xA;    netcat -z -w 5 8.8.8.8 53 &amp;amp;&amp;amp; echo 1 || echo 0&#xA;}&#xA;&#xA;# Initial check to see if we're online&#xA;IS_ONLINE=check_online&#xA;# How many times we should check if we're online - prevents infinite looping&#xA;MAX_CHECKS=5&#xA;# Initial starting value for checks&#xA;CHECKS=0&#xA;&#xA;# Loop while we're not online.&#xA;while [ $IS_ONLINE -eq 0 ];do&#xA;    # We're offline. Sleep for a bit, then check again&#xA;&#xA;    sleep 10;&#xA;    IS_ONLINE=check_online&#xA;&#xA;    CHECKS=$[ $CHECKS + 1 ]&#xA;    if [ $CHECKS -gt $MAX_CHECKS ]; then&#xA;        break&#xA;    fi&#xA;done&#xA;&#xA;if [ $IS_ONLINE -eq 0 ]; then&#xA;    # We never were able to get online. Kill script.&#xA;    exit 1&#xA;fi&#xA;&#xA;# Now we enter our normal code here. The above was just for online checking&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-07-22T16:30:59.083" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12780" PostTypeId="1" AcceptedAnswerId="12784" CreationDate="2017-07-23T13:13:51.310" Score="0" ViewCount="804" Body="&lt;p&gt;I try to fix this so many times since I install elementaryOS. And I try &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1435861/comments/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; fix but do not work. Also changed to &lt;code&gt;UXA&lt;/code&gt; and either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Intel Corporation Broadwell-U Integrated Graphics (rev 09)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This happens right now writing from Chrome, maybe is just the browser.&lt;/p&gt;&#xA;" OwnerUserId="10586" LastActivityDate="2017-07-23T20:05:39.780" Title="Screen Flicker on Loki" Tags="|release-loki|display|performance|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12781" PostTypeId="1" CreationDate="2017-07-23T15:10:02.207" Score="0" ViewCount="667" Body="&lt;p&gt;I am downloading elementary OS for the first time. I made the bootable usb and booted into it via UEFI USB from my bios. Then I selected *Install elementary OS, after this my screen goes black for a few seconds then turns off and gives me nothing, but my computer stays on and I have to hold power for it to turn off. I have a gtx 970 with my screen connected to a dvi port, and another screen connected to my motherboard vga, incase this was the issue. The GNU GRUB screen is visible on my screen attached to my gpu. I am new to this and excited! Help?&lt;/p&gt;&#xA;" OwnerUserId="11613" LastActivityDate="2018-09-07T14:00:47.160" Title="Having display issues during install?" Tags="|system-installation|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12782" PostTypeId="2" ParentId="4431" CreationDate="2017-07-23T16:57:48.103" Score="0" Body="&lt;p&gt;I know that this thread is very old now, but I just hope I can get an answer for those who may encounter it when using Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So to be blunt, we can use the command line to control Ibus instead of rely on the GUI thing. The commands are simple, in this case we will switch between English and Vietnamese, but other languages can apply without any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Get the English and Vietnamese engines&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ibus list-engine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should find the engines for English and Vietnamese as xkb:us::eng and Unikey, respectively&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2: Create the scripts for changing input methods&lt;/strong&gt;&#xA;I'm not a pro so I create simple scripts, you will need two here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a &lt;code&gt;bin&lt;/code&gt; directory if you haven't already, and &lt;code&gt;cd&lt;/code&gt; into it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p newbin &amp;amp;&amp;amp; cd newbin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the scripts, first is for US English input method:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;ibus engine xkb:us::eng&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then for Vietnamese:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;ibus engine Unikey&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save them as cim_en.sh and cim_vn.sh (&quot;cim&quot; stands for &lt;strong&gt;c&lt;/strong&gt;hange &lt;strong&gt;i&lt;/strong&gt;nput &lt;strong&gt;m&lt;/strong&gt;ethod)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make them executable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod 755 cim_en.sh cim_vn.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, create keyboard shortcuts for them, first go to &lt;strong&gt;settings&lt;/strong&gt; -&gt; &lt;strong&gt;Keyboard&lt;/strong&gt; -&gt; &lt;strong&gt;Shortcuts&lt;/strong&gt; -&gt; &lt;strong&gt;Custom&lt;/strong&gt;. Here, click the '+' icon at the bottom and create 2 keyboard shortcuts with the name of the scripts. Assign the key combinations that you want, then reboot if the scripts are not working already.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rrGk1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rrGk1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And that pretty much solved the problem for me.&lt;/p&gt;&#xA;" OwnerUserId="10530" LastActivityDate="2017-07-23T16:57:48.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12783" PostTypeId="2" ParentId="7446" CreationDate="2017-07-23T18:24:19.143" Score="0" Body="&lt;p&gt;This is the fix. You need to force Android Studio to use the system version of libstdc++&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Android/Sdk/tools/lib64/libstdc++&#xA;mv libstdc++.so.6 libstdc++.so.6.bak&#xA;ln -s /usr/lib64/libstdc++.so.6 ~/Android/Sdk/tools/lib64/libstdc++&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-23T18:24:19.143" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12784" PostTypeId="2" ParentId="12780" CreationDate="2017-07-23T20:05:39.780" Score="0" Body="&lt;p&gt;have you tried this&#xA;&lt;a href=&quot;https://support.google.com/chrome/forum/AAAAP1KN0B0CtKF2BiskT8/?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;solution&lt;/a&gt;?&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-23T20:05:39.780" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12785" PostTypeId="2" ParentId="10793" CreationDate="2017-07-23T23:23:59.603" Score="0" Body="&lt;p&gt;Bluetooth Device Search window doesn't display any results.&#xA;For some reason the device results are collapsed leading the user to falsely believe no devices are being detected when in fact they are. Simply stretch the window vertically to see the results.&lt;/p&gt;&#xA;" OwnerUserId="11618" LastActivityDate="2017-07-23T23:23:59.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12787" PostTypeId="1" AcceptedAnswerId="14499" CreationDate="2017-07-24T00:25:32.937" Score="0" ViewCount="70" Body="&lt;p&gt;I've set some custom icons (via editing .desktop files) for some apps using png files stored in my home directory. In the Slingshot menu they are showing the generic grey square with gear icon. Yet when launching the app the proper icon appears on Plank. Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-01-22T16:54:02.480" Title="App Icon not loading in Slingshot" Tags="|plank|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12788" PostTypeId="1" AcceptedAnswerId="12789" CreationDate="2017-07-24T01:34:13.030" Score="0" ViewCount="1721" Body="&lt;p&gt;I'm trying to setup Elementary OS as a VM on my Windows machine, and I wanted to use VMWares Unity mode. However, every time I try to load it up, it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The virtual machine cannot enter Unity mode because:&#xA;&#xA;- Unity is not supported in Linux guests.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Yet I've seen others make this work with other Linux distros like Xubuntu. Does VMWare not support ElementaryOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried also installing the VMware tools as well but no luck...&lt;/p&gt;&#xA;" OwnerUserId="9062" LastActivityDate="2018-11-16T16:02:40.897" Title="Setting up Elementary OS with VMware Workstation, cannot use unity?" Tags="|virtualization|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12789" PostTypeId="2" ParentId="12788" CreationDate="2017-07-24T02:06:07.917" Score="0" Body="&lt;p&gt;VMware drop support for Unity with later Workstations, use VMware Player 7 and it works. &lt;a href=&quot;https://communities.vmware.com/thread/518568&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://communities.vmware.com/thread/518568&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9062" LastActivityDate="2017-07-24T02:06:07.917" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12790" PostTypeId="1" CreationDate="2017-07-24T04:45:18.610" Score="0" ViewCount="577" Body="&lt;p&gt;I have bluetooth hardware and I already enabled it on sharing&gt;bluetooth; but the icon doesn't appear on the top panel. My phone can't find my laptop and my laptop doesn't discover new devices. I tried asking on the irc channel but nobody answers. :(&lt;/p&gt;&#xA;" OwnerDisplayName="user9170" LastEditorUserId="7492" LastEditDate="2017-07-24T12:23:03.027" LastActivityDate="2024-03-15T19:02:35.340" Title="Bluetooth Isn't Working" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12791" PostTypeId="1" AcceptedAnswerId="13316" CreationDate="2017-07-24T11:06:21.083" Score="1" ViewCount="431" Body="&lt;p&gt;My AppCenter does not contain any of the apps in the &lt;a href=&quot;https://elementary.io/#appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;screenshot displayed on the elementaryOS website&lt;/a&gt;. For example, searching for NaSC as demoed comes up with nothing. I have tried installing from source, but nothing changes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JA0Oy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JA0Oy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do to get these apps in the AppCenter?&#xA;I am running 0.4.1 Loki&lt;/p&gt;&#xA;" OwnerUserId="11623" LastActivityDate="2018-01-23T21:56:38.433" Title="AppCenter not displaying showcased apps" Tags="|release-loki|appcenter|apps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12793" PostTypeId="2" ParentId="10092" CreationDate="2017-07-24T13:01:24.560" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://orig12.deviantart.net/4c29/f/2017/233/8/b/ose_light___xtrlght_gtk_themes_for_elementary_os_by_wefunkster-dbh88n2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://orig12.deviantart.net/4c29/f/2017/233/8/b/ose_light___xtrlght_gtk_themes_for_elementary_os_by_wefunkster-dbh88n2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a light and mac-ish theme that also targets some elementary OS specific features that are not so well supported in other themes (and no need to mess around with your GTK Version as this works under GTK+ 3.18.x)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;correct elementary OS specific and adaptive Wingpanel behaviour: dark transparent background with light and/or noisy wallpapers, fully transparent with dark and clean wallpapers, solid black with maximized windows.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;corrected a graphic glitch with 3rd party themes in Photos by inserting the code from the og elementary theme from apps.css to GTK-3.18/gtk.css  (.checkerboard-layout) (this issue here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8699/weird-graphical-glitch-in-photos-apps&quot;&gt;Weird graphical glitch in Photos (apps)&lt;/a&gt; )&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;changed transparency of Wingpanel from alpha 0.5 to 0.3 (readability is still there and it blends a little bit nicer with your wallpaper IMO).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;reduced header-bar button padding (spacing)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Issues (any help or hints appreciated):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Level-bar for drive capacity in Files sidebar now &quot;almost&quot; works. Background/border missing. - Please help? Where to tinker?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Check it out here: LINK: &lt;a href=&quot;http://fav.me/dbh88n2&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://fav.me/dbh88n2&lt;/a&gt; &amp;lt; LINK&lt;/p&gt;&#xA;" OwnerUserId="4584" LastEditorUserId="4584" LastEditDate="2017-08-24T07:24:45.803" LastActivityDate="2017-08-24T07:24:45.803" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12794" PostTypeId="1" CreationDate="2017-07-24T14:59:35.417" Score="2" ViewCount="1231" Body="&lt;p&gt;How I know actual kernel stable version on Loki 0.4.1? Actually, my kernel version is Linux 4.10.0-27.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;23/01/2018 - 4.13.0-31-generic #34~16.04.1-Ubuntu&lt;/p&gt;&#xA;" OwnerUserId="8404" LastEditorUserId="19360" LastEditDate="2019-12-16T03:36:12.390" LastActivityDate="2023-12-25T15:07:50.940" Title="How I know actual kernel stable on Loki 0.4.1?" Tags="|release-loki|kernel|" AnswerCount="3" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12795" PostTypeId="2" ParentId="12794" CreationDate="2017-07-24T15:13:09.967" Score="0" Body="&lt;p&gt;I believe the most current kernel release is 4.8.0.56. 4.10 is not the LTS kernel.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-24T15:13:09.967" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12798" PostTypeId="1" AcceptedAnswerId="12799" CreationDate="2017-07-25T12:53:54.240" Score="0" ViewCount="118" Body="&lt;p&gt;I've been told that Elementry OS is built from Ubuntu and Debian.Many of the digital rights webistes were not recommending UBUNTU derivative distros for privacy since Canonical’s Ubuntu contains Amazon ads and data leaks by default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;GNU/Linux distributions based on Ubuntu are also currently not recommended due to several other reasons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;IS THIS TRUE ?!!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resouce:&#xA;&lt;a href=&quot;https://prism-break.org/en/categories/gnu-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;@Please go to Operating system sub-catagory&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10134" LastEditorUserId="15904" LastEditDate="2018-11-30T20:07:17.197" LastActivityDate="2018-11-30T20:07:17.197" Title="Is it true that Elementry OS is quite vulnerable to Mass Surveillance programs like PRISM?" Tags="|release-loki|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12799" PostTypeId="2" ParentId="12798" CreationDate="2017-07-25T13:21:03.883" Score="1" Body="&lt;p&gt;The Amazon shopping component has nothing to do with &quot;PRISM&quot; or other mass surveillance programs (though the amazon component of Ubuntu is hardly something I would call mass surveillance). But anything you do online can be tracked no matter what system you use. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary does not have the Amazon shopping tracking component. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-07-25T14:55:03.593" LastActivityDate="2017-07-25T14:55:03.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12800" PostTypeId="2" ParentId="6744" CreationDate="2017-07-25T13:22:50.533" Score="1" Body="&lt;p&gt;The official answer is: No&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;But&lt;/strong&gt; I did manage to upgrade from freya to loki directly today.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, upgrade Ubuntu from 14.04 to 16.04, and then upgrade the elementary OS stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how (may not working for everyone, because I got many exceptions, and have done a lot of manual intervention):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;apt update&lt;/code&gt;, &lt;code&gt;apt upgrade&lt;/code&gt;, &lt;code&gt;apt dist-upgrade&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;Make sure &lt;code&gt;Prompt=lts&lt;/code&gt; in file&lt;code&gt;/etc/update-manager/release-upgrades&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;Edit &lt;code&gt;/etc/lsb-release&lt;/code&gt;, change &lt;code&gt;DISTRIB_CODENAME=freya&lt;/code&gt; to &lt;code&gt;DISTRIB_CODENAME=trusty&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;do-release-upgrade&lt;/code&gt; (I got &lt;code&gt;No new release found&lt;/code&gt; at the beginning, then I tried &lt;code&gt;update-manager -c&lt;/code&gt;). Your 3rd party apt sources will be disabled automatically, and the term &lt;code&gt;trusty&lt;/code&gt; will be updated to &lt;code&gt;xenial&lt;/code&gt; in file &lt;code&gt;/etc/apt/source.list&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;Downloading Ubuntu xenial upgrades;&lt;/li&gt;&#xA;&lt;li&gt;I was unable to finish installing upgrades because of error &lt;code&gt;UnboundLocalError: local variable 'e' referenced before assignment&lt;/code&gt; in file &lt;code&gt;/tmp/ubuntu-release-upgrader-e78072qe/DistUpgrade/DistUpgradeController.py&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;So I did &lt;code&gt;apt update&lt;/code&gt;, &lt;code&gt;apt upgrade&lt;/code&gt; and &lt;code&gt;apt dist-upgrade&lt;/code&gt; to finish (maybe I guess) the installation;&lt;/li&gt;&#xA;&lt;li&gt;Don't reboot your computer right now, the previous elementary components have been removed by &lt;code&gt;apt upgrade&lt;/code&gt; and &lt;code&gt;apt dist-upgrade&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;Re-enable the 3rd party apt sources by uncommenting *.list files in directory &lt;code&gt;/etc/apt/source.list.d/&lt;/code&gt;, and replace &lt;code&gt;trusty&lt;/code&gt; with &lt;code&gt;xenial&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt install pantheon-greeter pantheon-shell pantheon-terminal pantheon-files slingshot-launcher slingshot gala&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt install switchboard wingpanel switchboard-plug-applications switchboard-plug-bluetooth switchboard-plug-display switchboard-plug-datetime switchboard-plug-keyboard switchboard-plug-locale switchboard-plug-mouse-touchpad switchboard-plug-networking switchboard-plug-notifications switchboard-plug-online-accounts switchboard-plug-pantheon-shell switchboard-plug-parental-controls switchboard-plug-power switchboard-plug-printers switchboard-plug-security-privacy switchboard-plug-sharing switchboard-plug-useraccounts switchboard-plug-users&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;I got conflict errors so I removed python3-aptdaemon: &lt;code&gt;apt remove python3-aptdaemon&lt;/code&gt; and then continued &lt;code&gt;apt upgrade&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt autoremove&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;reboot&lt;/code&gt; and loki is up&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I may have forgotten something because I didn't do records in the upgrade process, the above steps are rearranged from the bash history.&lt;/p&gt;&#xA;" OwnerUserId="11631" LastEditorUserId="11631" LastEditDate="2017-07-26T04:19:03.457" LastActivityDate="2017-07-26T04:19:03.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12801" PostTypeId="1" CreationDate="2017-07-25T15:56:01.703" Score="0" ViewCount="164" Body="&lt;p&gt;because most of the available printer drivers do not support 64 bit, I'd like to know, how I can install my brother driver in Loki. Many thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, Dragomrak&lt;/p&gt;&#xA;" OwnerUserId="9236" LastActivityDate="2019-01-07T08:02:00.397" Title="Install printer driver 32 bit" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12803" PostTypeId="2" ParentId="12801" CreationDate="2017-07-25T17:06:41.997" Score="1" Body="&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gcc-4.8-base:i386 libgcc1:i386 libc6:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The follow &lt;a href=&quot;https://web.archive.org/web/20140319074536/http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/instruction_prn3.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; instructions for your Brother printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or in Synaptic, search and install these:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;brother-lpr-drivers-laser&#xA;brother-cups-wrapper-laser&#xA;brother-lpr-drivers-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-25T17:06:41.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12805" PostTypeId="1" AcceptedAnswerId="12807" CreationDate="2017-07-26T00:09:09.420" Score="0" ViewCount="1104" Body="&lt;p&gt;I'm adding all of the operating systems I've tried's torrents to a folder in Google Drive so I can download/install them anywhere/anytime without the bulk of the .iso file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked on the website and only saw the magnet link and the .iso file but I would really like an up-to-date torrent file.&lt;/p&gt;&#xA;" OwnerUserId="10596" LastActivityDate="2017-07-26T01:53:38.073" Title="Is there an official torrent for elementary OS?" Tags="|system-installation|files|download|" AnswerCount="1" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12806" PostTypeId="2" ParentId="9204" CreationDate="2017-07-26T01:31:08.110" Score="1" Body="&lt;p&gt;If you plan on using Elementary OS in UEFI, and don't plan on using legacy mode for anything, it may be useful to turn off Legacy Option ROM in your BIOS. Ensuring that the boot mode is UEFI, and you boot into the OS in UEFI mode. Disabling Secure Boot beforehand also eliminates some risk, as you'll need to disable it anyway. You may want to delete any existing UEFI operating systems from the UEFI directory. Once booted into the installer, you should be free and clear. I'd you intend to manually configure your partitions, ensure the partition table is GPT, and you create a ~512MB EFI system partition. Automatic partitioning should take care of this though.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2017-07-26T01:31:08.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12807" PostTypeId="2" ParentId="12805" CreationDate="2017-07-26T01:45:35.397" Score="1" Body="&lt;p&gt;You can always generate a torrent file from the magnet link in case you need it. Just do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the magnet link using your torrent client&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Wait until metadata has been downloaded from peers (your torrent will now then start downloading the actual files, you can pause the download on this stage)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This varies from the torrent client you're using. Find the menubar item or right-click context menu that says something like &quot;Save torrent file As...&quot; and select it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You will now be presented to save the &lt;code&gt;.torrent&lt;/code&gt; file on your desired location&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;AFAIK there's also some programs or web apps that does this for you automatically. In case you don't trust such third-party services and you want maximum compatibility with your torrent client, I suggest doing the steps above instead.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-07-26T01:45:35.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12809" PostTypeId="1" CreationDate="2017-07-26T05:00:01.810" Score="0" ViewCount="758" Body="&lt;p&gt;I would like to update all of my programs, but something wrong.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&#xA;[sudo] password for racztamaska:           &#xA;Hit:1 http://gb.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Ign:3 http://dl.google.com/linux/chrome/deb stable InRelease                        &#xA;Hit:4 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease     &#xA;Get:5 http://gb.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]         &#xA;Hit:6 http://dl.google.com/linux/chrome/deb stable Release                          &#xA;Hit:7 http://packages.elementary.io/appcenter xenial InRelease                      &#xA;Get:8 http://gb.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]       &#xA;Get:9 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]        &#xA;Get:10 https://repo.skype.com/deb stable InRelease [4,487 B]  &#xA;Err:10 https://repo.skype.com/deb stable InRelease             &#xA;The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1F3045A5DF7587C3&#xA;Reading package lists... Done &#xA;W: GPG error: https://repo.skype.com/deb stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 1F3045A5DF7587C3&#xA;E: The repository 'https://repo.skype.com/deb stable InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What is the problem? What is public_key?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, help me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tamas&lt;/p&gt;&#xA;" OwnerUserId="7408" LastEditorUserId="10163" LastEditDate="2017-08-01T08:28:31.713" LastActivityDate="2019-04-24T12:01:20.220" Title="Something wrong with updates and appcenter" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12810" PostTypeId="2" ParentId="12794" CreationDate="2017-07-26T05:14:14.770" Score="0" Body="&lt;p&gt;Ubuntu 16.04 is now on kernel 4.10.x &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has reached 17.04, which is on 4.10x. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu will soon release a new ISO of 16.04.3 LTS The Kernel is already out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, if you did a dist-upgrade trough the Terminal, you're also on that kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack#Kernel.2FSupport.A16.04.x_Ubuntu_Kernel_Support&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/LTSEnablementStack#Kernel.2FSupport.A16.04.x_Ubuntu_Kernel_Support&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5013" LastActivityDate="2017-07-26T05:14:14.770" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12812" PostTypeId="2" ParentId="11671" CreationDate="2017-07-26T06:33:46.200" Score="5" Body="&lt;p&gt;google-drive-ocamlfuse is what you want. &#xA;It integrates Google Drive as a removable drive into Pantheon Files and/or Nautilus. It is free too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find detailled info on how to set it up (and to automatically mount at startup) here: &lt;a href=&quot;http://www.webupd8.org/2013/09/mount-google-drive-in-linux-with-google.html&quot; rel=&quot;noreferrer&quot;&gt;http://www.webupd8.org/2013/09/mount-google-drive-in-linux-with-google.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only issues I have is that it feels kinda slow (I have a 120 Mbit/s connection) loading thumbnails and ...&#xA;EDIT: Seldom disconnects after suspend have stopped and I can't reproduce the issue anymore.&lt;/p&gt;&#xA;" OwnerUserId="4584" LastEditorUserId="4584" LastEditDate="2017-08-26T06:28:55.433" LastActivityDate="2017-08-26T06:28:55.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12813" PostTypeId="1" AcceptedAnswerId="12816" CreationDate="2017-07-26T09:29:50.650" Score="0" ViewCount="310" Body="&lt;p&gt;I have recently tried to install Elementary OS 0.4.1 from a bootable USB stick. But there comes a message on command line interface that something Live (I have forgotten the line) is not found. What can I do now? &lt;/p&gt;&#xA;" OwnerUserId="11640" LastActivityDate="2017-07-26T11:33:57.937" Title="Installation From Bootable USB Stick" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12815" PostTypeId="2" ParentId="12276" CreationDate="2017-07-26T10:03:40.867" Score="0" Body="&lt;p&gt;Yes, this is possible, I do this for exactly the same reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you will want a script stored somewhere in your PATH, specially if you want to mount multiple shares. My script looks a bit like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;gvfs-mount smb://&amp;lt;server1&amp;gt;/&amp;lt;share1&amp;gt; &amp;amp;&#xA;gvfs-mount smb://&amp;lt;server2&amp;gt;/&amp;lt;share2&amp;gt; &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Don't forget to make the script executable (&lt;code&gt;chmod +x scriptname&lt;/code&gt;).&#xA;I keep the script in ~/bin but you can use wherever is most suitable for you.&#xA;Then, to have this run at login time, create a .desktop entry. You can do this either manually or through:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications --&gt; System Settings --&gt; Applications --&gt; Startup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From there click '+' and in the Custom Command box enter the name of your script. Log out and back in to check it works.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-07-26T10:03:40.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12816" PostTypeId="2" ParentId="12813" CreationDate="2017-07-26T11:33:57.937" Score="0" Body="&lt;p&gt;I recommend creating a new USB live using &lt;a href=&quot;https://rufus.akeo.ie/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rufus&lt;/a&gt; on Windows machine using a freshly downloaded ISO from the &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary&lt;/a&gt; website and try again.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-26T11:33:57.937" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12818" PostTypeId="2" ParentId="12809" CreationDate="2017-07-26T17:57:57.707" Score="1" Body="&lt;p&gt;Per the Debian &lt;a href=&quot;https://wiki.debian.org/SecureApt#How_to_find_and_add_a_key&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Wiki&quot;&gt;Wiki&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Public key cryptography is based on pairs of keys, a public key and a private key. The public key is given out to the world; the private key must be kept a secret. Anyone possessing the public key can encrypt a message so that it can only be read by someone possessing the private key. It's also possible to use a private key to sign a file, not encrypt it. If a private key is used to sign a file, then anyone who has the public key can check that the file was signed by that key. Anyone who doesn't have the private key can't forge such a signature.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To solve the error messages shown by the Terminal and install Skype, you need to add Skype's public key which can be done by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://repo.skype.com/data/SKYPE-GPG-KEY | sudo apt-key add - &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-07-26T17:57:57.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12819" PostTypeId="1" AcceptedAnswerId="12820" CreationDate="2017-07-26T18:12:40.313" Score="0" ViewCount="397" Body="&lt;p&gt;Since a while the notification bubbles over the application icon in the dock do not disappear anymore. It started with the AppCenter a few weeks ago. Usually, when there are new updates, there was a notification and the bubble above the icon, but after updating the bubble disappeared. Now the bubble stays, even after updating everything. Since a few days I have the same problem with Thunderbird, the bubble stays even after reading all my new emails. After restarting the bubble disappears, but that's not really a long term solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know why this is and how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pPrbe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pPrbe.jpg&quot; alt=&quot;notification bubbles&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/jBCk5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jBCk5.jpg&quot; alt=&quot;everything up to date&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10152" LastActivityDate="2017-07-27T12:55:34.247" Title="OS Loki notification bubbles" Tags="|release-loki|notifications|" AnswerCount="2" CommentCount="0" ClosedDate="2019-04-19T21:07:47.337" ContentLicense="CC BY-SA 3.0" />
  <row Id="12820" PostTypeId="2" ParentId="12819" CreationDate="2017-07-26T18:15:57.053" Score="0" Body="&lt;p&gt;This is a reported bug with the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check Github Issue &lt;a href=&quot;https://github.com/elementary/appcenter/issues/390&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;390&quot;&gt;#390&lt;/a&gt; to read more about it.&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-07-26T18:15:57.053" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12824" PostTypeId="1" AcceptedAnswerId="12843" CreationDate="2017-07-26T23:00:01.483" Score="0" ViewCount="167" Body="&lt;p&gt;So I just got the update to kernel 4.10 and now the touchpad sensitivity has been severely reduced and feels, I can only describe as, sloppy. It now lacks precision and I can't adjust that. Is there is fix for this? Reverting back to kernel 4.8 on boot does not fix this. Neither does moving to 4.12. This might be related to a libinput update that came along with the kernel update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've opened a bug report &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1707032&quot; rel=&quot;nofollow noreferrer&quot;&gt;on Launchpad&lt;/a&gt;. I appears to have messed up the threshold and acceleration settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System is Dell Insprion 15 7579 - i7200U i5 Kaby Lake.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-07-28T14:44:57.307" LastActivityDate="2017-12-20T21:03:55.620" Title="libinput/kernel Update Screwed my pointer accel/threshold" Tags="|mouse|kernel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12826" PostTypeId="1" AcceptedAnswerId="13013" CreationDate="2017-07-27T08:39:43.487" Score="0" ViewCount="1918" Body="&lt;p&gt;I've been using ElementaryOS for a few months since I decided it would be my daily driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had no problems with it until last night when I decided to run a &quot;apt upgrade&quot; from terminal then rebooted the computer as I always do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The funny thing is that the elementaryOS logo shows up, then it goes to the blinking cursor and gets stuck there forever, and if I hit CTRL + ALT + DEL, it shows the logo once again and then reboots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried booting into the recovery mode and selecting the DPKG option to check for broken packages but it says &quot;An upgrade from 'loki' to 'xenial' is not supported by this tool&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FSCK won't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't really know where to go from here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="11648" LastActivityDate="2017-08-14T13:35:36.120" Title="Loki won't boot, stuck on blinking cursor" Tags="|release-loki|boot|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12828" PostTypeId="1" CreationDate="2017-07-27T12:07:21.430" Score="0" ViewCount="1119" Body="&lt;p&gt;I am having some problems with Dropbox. I have installed it but it doesn't open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There also a bad icon on that top&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BdhuD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BdhuD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10359" LastActivityDate="2021-01-10T21:16:49.137" Title="Problems with Dropbox" Tags="|dropbox|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12830" PostTypeId="2" ParentId="12819" CreationDate="2017-07-27T12:55:34.247" Score="0" Body="&lt;p&gt;Try keep the app on Dock and remove after. Work for me. :)&lt;/p&gt;&#xA;" OwnerUserId="8404" LastActivityDate="2017-07-27T12:55:34.247" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12832" PostTypeId="1" CreationDate="2017-07-27T18:06:15.823" Score="1" ViewCount="858" Body="&lt;p&gt;I just installed elementary OS 0.4.1 Loki on an iMac over the last weekend and everything went swimmingly well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This AM when I try &lt;code&gt;sudo apt-get update&lt;/code&gt;, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get this message: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="11653" LastEditorUserId="16827" LastEditDate="2019-04-13T13:35:34.380" LastActivityDate="2019-04-13T13:35:34.380" Title="elementary OS Update" Tags="|release-loki|updates|apt|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12833" PostTypeId="1" CreationDate="2017-07-27T18:41:58.323" Score="1" ViewCount="1110" Body="&lt;p&gt;The following problem emerged after the previous software update was installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to save something from the internet on a browser, I get a window in which I can browse my file system to choose where I save it. However, the save button is missing. As a result, I am unable to save anything from my browser. I've tried using Google Chrome, Chromium, and Firefox and have the same issue with all of them. I've currently just chosen the browser option of automatically saving things to the Downloads folder, rather than open up the window in which I can browse my files. However, I am often unable to save automatically and the file browser window shows up, in which case I cannot save. This has become very inconvenient so it's impossible for me to download some things from the browser. Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the screenshot of it. I tried to save some archive. Notice that the save button not showing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kkXIz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kkXIz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11654" LastEditorUserId="8575" LastEditDate="2017-08-11T11:38:22.117" LastActivityDate="2019-04-24T19:01:10.330" Title="Elementary OS update - Save button missing when trying to download from internet browser" Tags="|release-loki|window-management|" AnswerCount="1" CommentCount="6" ClosedDate="2019-04-25T05:56:08.120" ContentLicense="CC BY-SA 3.0" />
  <row Id="12839" PostTypeId="2" ParentId="12828" CreationDate="2017-07-28T07:34:09.967" Score="5" Body="&lt;p&gt;This is a known issue which effects several applications. To fix it edit the &lt;code&gt;~/.config/autostart/dropbox.desktop&lt;/code&gt; file and change the &lt;code&gt;Exec&lt;/code&gt; line to this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE=&quot;&quot; dropbox start -i&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and back in and the icon should be correct. I have noticed that even with this the menu sometimes does not appear correctly, but usually a second click will work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My complete &lt;code&gt;.desktop&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Dropbox&#xA;GenericName=File Synchronizer&#xA;Comment=Sync your files across computers and to the web&#xA;Exec=env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE=&quot;&quot; dropbox start -i&#xA;Terminal=false&#xA;Type=Application&#xA;Icon=dropbox&#xA;Categories=Network;FileTransfer;&#xA;StartupNotify=false&#xA;X-GNOME-Autostart-enabled=true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9266" LastEditorUserId="9266" LastEditDate="2017-07-29T21:51:41.927" LastActivityDate="2017-07-29T21:51:41.927" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12840" PostTypeId="1" CreationDate="2017-07-28T14:06:28.397" Score="0" ViewCount="1052" Body="&lt;p&gt;I really enjoy ElementaryOS and I want it to be my everyday operating system, but I have some issues...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently running 3 monitors: one 4K, and two more displays (lower resolution) in vertical position next to my 4K. So, I need to &lt;strong&gt;change the windows scaling&lt;/strong&gt; of my 4K monitor because all the things are too small, and &lt;strong&gt;rotate&lt;/strong&gt; my 2 external displays.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried, but, I think that the &lt;strong&gt;Display Settings&lt;/strong&gt; are broken: I cannot apply the rotation - I can only change resolution and then click &lt;em&gt;apply&lt;/em&gt;, with bugs of x,y,z positioning and more problems...&#xA;I updated and upgraded everything but I can't fix the rotation problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How can I rotate my vertical displays and fix the windows scaling properties of the &quot;big one&quot;?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UP:&lt;/strong&gt; I finally made it. I rotated both the screen. But I still can't move them. That's what it should look like (but I can't click on &lt;em&gt;&quot;Apply&quot;&lt;/em&gt;):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iafj9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iafj9.png&quot; alt=&quot;That&amp;#39;s what it should look like (but I can&amp;#39;t click on *&amp;quot;Apply&amp;quot;*)&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/swUcf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/swUcf.jpg&quot; alt=&quot;And... what it&amp;#39;s now.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And... what it's now.&lt;/p&gt;&#xA;" OwnerUserId="11659" LastEditorUserId="45" LastEditDate="2017-08-20T19:56:12.620" LastActivityDate="2024-03-17T23:01:35.167" Title="How can I change windows scaling for different display resolution? (and rotation problem!!)" Tags="|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12841" PostTypeId="2" ParentId="12840" CreationDate="2017-07-28T15:59:47.677" Score="0" Body="&lt;p&gt;Which release are you running?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki will automatically detect and set the native resolution of each screen.  Then, the Display applet in Settings will have a context menu to rotate your secondary displays.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change the font size under Accessibility.  If you want to change the interface scaling, use dconf editor under org.gnome.desktop.interface.scaling-factor.  I find however that 0 (let the system autodetect) works the best.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my development workstation I have a 4k and two 1080 displays.  The 4k and one 1080 are in landscape, while the third display is in portrait orientation.  The Display applet under settings properly rotates the portrait screen, and the layout saves and restores flawlessly.  I use &quot;Largest&quot; font size in Accessibility, and then per application I will zoom in or out if I am running it on the 4k or a 1080 display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each screen cannot have its own scaling or font sizes.  These settings are system wide.  Therefore find a suitable middle ground that looks ok on all the displays, and stick with it.  This is a known limitation of all current Linux window managers, from my experience.&lt;/p&gt;&#xA;" OwnerUserId="11661" LastEditorUserId="11661" LastEditDate="2017-07-28T19:51:36.633" LastActivityDate="2017-07-28T19:51:36.633" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12843" PostTypeId="2" ParentId="12824" CreationDate="2017-07-28T20:14:10.440" Score="0" Body="&lt;p&gt;I don't have a permanent fix but a work around for those affected by this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to Settings &gt; Applications &gt; Startup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hit the + at the bottom right and enter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xset m 3/1 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will run this command when the system boots and set the mouse speed and acceleration to what it was before the update screwed it up. 3/1 is the acceleration and 4 is the threshold. You can look &lt;a href=&quot;https://wiki.archlinux.org/index.php/Mouse_acceleration&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for more information on the settings and play around with them until they meet your needs. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: The xset output immediately after the update was 5/1 5. So considerably different. What causes the modification I do not know. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-07-28T20:14:10.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12844" PostTypeId="2" ParentId="12832" CreationDate="2017-07-28T22:44:51.060" Score="1" Body="&lt;p&gt;There isn't xenial release to that PPA. You can find the accepted releases at &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Versable PPA dists&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to install Elementary Tweaks you can try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Loki Elementary tweak PPA by Felipe Escoto&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="565" LastEditDate="2017-11-02T23:42:45.177" LastActivityDate="2017-11-02T23:42:45.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12847" PostTypeId="1" CreationDate="2017-07-29T11:17:34.237" Score="0" ViewCount="936" Body="&lt;p&gt;cunning folks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this occured after doing an 'apt-get update' and then 'apt-get upgrade' which I thought would keep elementary OS among other applications, up to date.&#xA;After a restart, I was presented with fugly Ubuntu icons and generic application icons. Any idea whatsoever how I can revert back to elementary OS' icons? I'm sure they're available, I just don't get why the Ubuntu theme replaced these icons. Did the 'apt-get upgrade' somehow think that I wanted the latest of the Ubuntu environment?&#xA;Both the Wing panel, Dock among icons for Photos, Calendar, Mail and so on were affected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that no other applications were installed through the upgrade, only the useless change of theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bl1lY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bl1lY.png&quot; alt=&quot;Screenshot showing disappeared elementary OS icons&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11674" LastActivityDate="2019-04-22T18:04:05.790" Title="elementary OS Icons Disappeared" Tags="|wingpanel|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12848" PostTypeId="1" CreationDate="2017-07-29T11:20:20.300" Score="4" ViewCount="283" Body="&lt;p&gt;Since two days ago, I am experiencing a difference in how one-finger movements on the touchpad are translated into cursor movement. It is less smooth than before, especially when it's just a small movement the cursor seems to resist to move, e.g. when I'm trying to hit a button or something.&#xA;What could have caused that? Has there been an update to the driver? If so, how can I revert back to the previous version?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using an Asus Zenbook UX305U with elementary OS Loki 0.4.1&lt;/p&gt;&#xA;" OwnerUserId="6463" LastActivityDate="2017-09-13T22:32:06.720" Title="Touchpad cursor movement less smooth than it used to be" Tags="|release-loki|touchpad|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12849" PostTypeId="1" AcceptedAnswerId="12958" CreationDate="2017-07-29T13:41:59.693" Score="0" ViewCount="1170" Body="&lt;p&gt;I am a total newbie here, and cant figure out how to get the Wifi to work on my laptop &lt;strong&gt;(HP Pavilion AB Series)&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps I did take:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Reinstalled Elementary with Ethernet connected and checking on two options &quot;Install Updates&quot; &amp;amp; &quot;Download 3rd Party Software&quot;. I also ticked the Secure Boot Option, and inserted a password there. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Ran the following code through the terminal:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;After which I promptly restarted my laptop to see whether it was fixed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Questions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;After I reinstalled it, the Status bar options, does show Ethernet but doesnt show my Wifi which is called &quot;Siddhant&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Is the problem with my secure boot?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Please do tell if you need me to run some other codes to provide a better look at what is the supposed problem.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;EDIT: I SOLVED THIS BY SIMPLY GOING INTO THE BIOS AND DISABLING &lt;strong&gt;SECURE BOOT&lt;/strong&gt;. Took me a week to find this out, but I hope this helps out anyone with similar issues.&lt;/p&gt;&#xA;" OwnerUserId="11675" LastEditorUserId="11675" LastEditDate="2017-08-08T14:30:26.897" LastActivityDate="2017-08-08T14:32:03.140" Title="WiFi is not working in Loki 0.4.1 (HP Pavilion)" Tags="|release-loki|wifi|ethernet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12850" PostTypeId="1" CreationDate="2017-07-29T17:30:07.390" Score="0" ViewCount="110" Body="&lt;p&gt;I dual-booted with Windows a while ago. Now I want to delete Windows (already did it) and make elementary take the rest of the hd without having to reinstall the system.&lt;/p&gt;&#xA;" OwnerUserId="11676" LastActivityDate="2018-04-26T10:02:23.483" Title="Dual-booted with Windows and I don't want Windows anymore" Tags="|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12854" PostTypeId="2" ParentId="12850" CreationDate="2017-07-30T04:25:10.577" Score="1" Body="&lt;p&gt;I think it should not be a problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;here's one link &lt;a href=&quot;https://codesilence.wordpress.com/2013/03/14/live-resizing-of-an-ext4-filesytem-on-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;how to live resize main partition&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm sure there are easier ways to do it with gparted or similar software (&lt;strong&gt;haven't done it myself in a while&lt;/strong&gt;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you can just mount it as a separate partition and use it for data storage. &lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-07-30T04:25:10.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12855" PostTypeId="1" AcceptedAnswerId="12860" CreationDate="2017-07-30T05:26:25.213" Score="0" ViewCount="325" Body="&lt;p&gt;I have an Acer Swift 3 running Loki. I also have a wired Apple keyboard with a number pad connected to my laptop, and for some reason the numberpad doesn't register as numbers, but as directional arrows. Is there anyway to correct this? I checked the keyboard settings but couldn't find any solutions. The numberpad works on MacOS and Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;" OwnerUserId="11611" LastActivityDate="2017-07-30T10:26:03.003" Title="Number pad on wired apple keyboard isn't working with ElementaryOS" Tags="|settings|keyboard|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12856" PostTypeId="1" CreationDate="2017-07-30T06:46:23.917" Score="0" ViewCount="6540" Body="&lt;p&gt;I somehow lost &lt;code&gt;/etc/sources.list&lt;/code&gt;&#xA;I'm tired of googling it all day. Please help me :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it is giving me this warning.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;The program 'screenfetch' is currently not installed. You can install it by typing:&#xA;apt install screenfetch&#xA;You will have to enable the component called 'universe'&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;B: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;A: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;C: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;D: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;D: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;D: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;C: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;C: command not found&#xA;WARNING:root:could not open file '/etc/apt/sources.list'&#xA;&#xA;C: command not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11673" LastEditorUserId="686" LastEditDate="2017-08-01T08:20:42.347" LastActivityDate="2017-08-17T07:48:24.327" Title="lost /etc/apt/sources.list" Tags="|release-loki|pantheon-terminal|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12857" PostTypeId="2" ParentId="12847" CreationDate="2017-07-30T08:08:37.600" Score="0" Body="&lt;p&gt;I can't comment yet (not enough reputation) so hope this is the right answer...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you still have the icons in &lt;code&gt;/usr/share/icons/elementary&lt;/code&gt;? If so then you should be able to switch back to them using &lt;code&gt;dconf Editor&lt;/code&gt; (install it if you don't have it already).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start &lt;code&gt;dconf Editor&lt;/code&gt; then browse to &lt;code&gt;org&lt;/code&gt; --&gt; &lt;code&gt;gnome&lt;/code&gt; --&gt; &lt;code&gt;desktop&lt;/code&gt; --&gt; &lt;code&gt;interface&lt;/code&gt; and from there look for &lt;code&gt;icon-theme&lt;/code&gt;, it should be set to &lt;code&gt;elementary&lt;/code&gt;. Whilst you are there you may want to check the other options like &lt;code&gt;cursor-theme&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-07-30T08:08:37.600" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12858" PostTypeId="2" ParentId="12855" CreationDate="2017-07-30T08:16:02.717" Score="0" Body="&lt;p&gt;In &lt;code&gt;System Settings&lt;/code&gt;, go to &lt;code&gt;Keyboard&lt;/code&gt; and select the &lt;code&gt;Options&lt;/code&gt; group along the top. On the left select &lt;code&gt;Miscellaneous compatibility options&lt;/code&gt; and you will see several options for the keypad. You probably want to enable the top option to have it behave like macOS.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-07-30T08:16:02.717" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12859" PostTypeId="1" AcceptedAnswerId="12866" CreationDate="2017-07-30T10:13:42.307" Score="0" ViewCount="1580" Body="&lt;p&gt;LightDM freezes to much on my Loki installation. After freeze I need to restart my computer hard. It is not good for my hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to try out the gdm?&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2017-08-30T10:21:08.807" Title="How to replace LightDM with GDM?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12860" PostTypeId="2" ParentId="12855" CreationDate="2017-07-30T10:26:03.003" Score="2" Body="&lt;p&gt;That worked for me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;get dconf-editor (from App store) &lt;/li&gt;&#xA;&lt;li&gt;go to&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;org → gnome → settings-daemon → peripherals → keyboard&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;and change to&#xA;&lt;code&gt;numlock-state on&lt;/code&gt; (standard is &quot;off&quot;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2017-07-30T10:26:03.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12862" PostTypeId="1" CreationDate="2017-07-31T03:06:40.373" Score="0" ViewCount="517" Body="&lt;p&gt;I am trying to figure out how to reinstall App Center, I want to think it worked in the beginning, but cant remember...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install appcenter&#xA;Reading package lists... Error!&#xA;E: Encountered a section with no Package: header&#xA;E: Problem with MergeList /var/lib/apt/lists/ca.archive.ubuntu.com_ubuntu_dists_xenial-backports_main_binary-amd64_Packages&#xA;E: The package lists or status file could not be parsed or opened.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11683" LastEditorUserId="686" LastEditDate="2017-08-01T08:27:48.073" LastActivityDate="2024-03-29T17:07:30.827" Title="Elementary OS 0.4 Loki (64bit): How to reinstall app center?" Tags="|release-loki|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12863" PostTypeId="1" CreationDate="2017-07-31T04:42:57.903" Score="0" ViewCount="428" Body="&lt;p&gt;Elementary OS is better than sliced bread but there are just a few small niggles one of them is that the power settings are consistent between charge and battery when it would make sense to separate the timeouts; eg you want battery screen off to be MUCH shorter than under charge. Thus brightness, auto brightness and Turn Off display should all be moved to the Plugged in and Battery panel IMHO does anyone agree?&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2019-08-26T03:02:45.343" Title="Power Settings limited" Tags="|settings|power|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12864" PostTypeId="1" CreationDate="2017-07-31T04:45:50.337" Score="0" ViewCount="172" Body="&lt;p&gt;i have dual (linux) boot; elementary (loki) and Mint (sarah)&#xA;each partition is roughly 100GB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how do i delete Mint, and join both partitions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&#xA;Pine Sol&lt;/p&gt;&#xA;" OwnerUserId="11683" LastActivityDate="2019-04-26T01:02:00.400" Title="elementary Loki 0.4 (64bit), Dual boot: delete one OS and join partition with elementary?" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12865" PostTypeId="2" ParentId="12864" CreationDate="2017-07-31T08:01:18.500" Score="1" Body="&lt;p&gt;Each partition is containing the whole system? Which one is handling GRUB-boot manager?&#xA;Do you have an extra Data-Partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If eOS is handling Grub you could just boot up any Live-Image, start GParted or Gnome Disks, delete Mint and increase the size of Loki's partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure to make backups before, as data loss can happen when changing partitions.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-07-31T08:01:18.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12866" PostTypeId="2" ParentId="12859" CreationDate="2017-07-31T08:06:53.363" Score="2" Body="&lt;p&gt;Didn't try this out, but this should work:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/152256/how-do-i-switch-from-lightdm-to-gdm&quot;&gt;https://askubuntu.com/questions/152256/how-do-i-switch-from-lightdm-to-gdm&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Note the comments down for Ubuntu &gt;15.10)&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-07-31T08:06:53.363" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12867" PostTypeId="1" CreationDate="2017-07-31T08:10:11.560" Score="1" ViewCount="98" Body="&lt;p&gt;I'm using a French Macintosh keyboard with Loki and for some reasons the keys highlighted in the picture are swapped. How do I swap them back?  Is it possible to manually change the keyboard layout?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZOkCs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZOkCs.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&amp;nbsp;&lt;/p&gt;&#xA;" OwnerUserId="11684" LastEditorUserId="11700" LastEditDate="2017-08-03T13:18:50.823" LastActivityDate="2021-08-13T13:50:25.137" Title="Swapped keys with French macintosh keyboard in ElementaryOs" Tags="|keyboard|macintosh|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12868" PostTypeId="2" ParentId="12849" CreationDate="2017-07-31T11:04:33.443" Score="0" Body="&lt;p&gt;Go to software &amp;amp; security settings and install driver for wifi adapter.&#xA;Sometimes WiFi driver are not installed.&lt;/p&gt;&#xA;" OwnerUserId="9651" LastActivityDate="2017-07-31T11:04:33.443" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12869" PostTypeId="2" ParentId="12867" CreationDate="2017-07-31T11:25:19.263" Score="0" Body="&lt;p&gt;Go to System settings -&gt; keyboard. There you can add other keyboard Layouts. &#xA;(+)Icon -&gt; choose French -&gt; choose the layout that fits your keyboard (there is one called Macintosh, maybe this fits, if not try the others)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Afterwards you can delete your first layout.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-07-31T11:25:19.263" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12872" PostTypeId="2" ParentId="8738" CreationDate="2017-07-31T14:36:44.120" Score="-1" Body="&lt;p&gt;Realtek ALC256 sound card problems have been resolved in Linux Kernel 4.12 and later.&lt;/p&gt;&#xA;" OwnerUserId="11688" LastActivityDate="2017-07-31T14:36:44.120" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12874" PostTypeId="2" ParentId="5472" CreationDate="2017-07-31T15:56:30.777" Score="0" Body="&lt;p&gt;What Nguyen said worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use a text editor and go to the root directory. (I'm using Sublime Text 3)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't have one, you can use the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /&#xA;nano .bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Scroll down to the end of the document, then create the line break (Enter in Windows/Linux)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;esac&#xA;# rbenv&#xA;export PATH=&quot;$HOME/.rbenv/bin:$PATH&quot;&#xA;eval &quot;$(rbenv init -)&quot;&#xA;export PATH=&quot;$HOME/.rbenv/plugins/ruby-build/bin:$PATH&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you're using the 'nano' command, press Ctrl+O then Enter to save the document.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Ctrl+X to exit nano.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you, Nguyen.&lt;/p&gt;&#xA;" OwnerUserId="11690" LastActivityDate="2017-07-31T15:56:30.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12875" PostTypeId="1" CreationDate="2017-07-31T17:41:10.490" Score="2" ViewCount="1503" Body="&lt;p&gt;A few weeks ago i was messing around with creating a Hotspot but after testing it i didn't want to have it anymore, now every time my laptop starts it automatic login to the test Hotspot i created, i then have to open up Network Settings and disabled the Hotspot option and then my system automatically logins to my home network, This is what i want to happen at startup not to login to Hotspot. I dont see any option to remove this hotspot i created, is there anyway to remove this hotspot via the gui or command line?&#xA;Any help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="11691" LastActivityDate="2020-11-29T12:57:50.100" Title="How to remove Hotspot profile from ElementaryOS network settings" Tags="|wifi|networking|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12876" PostTypeId="1" CreationDate="2017-07-31T18:08:20.930" Score="0" ViewCount="189" Body="&lt;p&gt;I have a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently I installed the last version of Elementary OS on my Dell Inspirion 5559 next to Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the installation everything was ok, I restarted my laptop a couple of times a the GRUB screen appears, so I coose Elementary and again everything was good. Once I chose Windows but later I cant never run Elementary again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have UEFI secure mode off but I dont know what else to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="11692" LastActivityDate="2017-09-08T10:11:57.373" Title="How to run Elementary OS in place of Windows 10 on my laptop?" Tags="|system-installation|dual-boot|window-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12877" PostTypeId="1" CreationDate="2017-07-31T23:12:44.347" Score="0" ViewCount="522" Body="&lt;p&gt;I write in Polish. In the Polish default keyboard on the special Polish characters are created by pressing right alt and several letters (z,s,c etc). Since I work a lot on macs I am used to another combination LEFT ALT + the letter. On my laptop I prefer the combination window key + the letter. In any case I find it difficult to type fast using the default combination of left alt + letter. In Freya it was easy to fix this by choosing 3rd level, in Loki it became impossible. To solve the problem I use command &quot;sudo dpkg-reconfigure keyboard-configuration&quot; and choose the combination I need BUT I HAVE TO DO IT EVERY TIME I RESET THE COMPUTER OR START WORKING. It is maybe acceptable but quite annoying. Is there any way I could preserve the keyboard layout I reach after using the reconfigure series of options (this takes some time and becomes tedious)? I would be grateful if hopefully someone told me how they reconfigured the keyboard permanently, many thanks Marek, Poland&lt;/p&gt;&#xA;" OwnerUserId="11694" LastActivityDate="2018-11-26T21:02:15.350" Title="Reconfigure keyboard permanently" Tags="|keyboard|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12878" PostTypeId="2" ParentId="12856" CreationDate="2017-08-01T06:46:19.710" Score="2" Body="&lt;p&gt;I asked something similar on G+ some time ago. Cannot give you the answer directly because I'm not allowed to post more than 2 links:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://plus.google.com/100718986567621730640/posts/Pgh3YhkWErW&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://plus.google.com/100718986567621730640/posts/Pgh3YhkWErW&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;with more reputation now, the full answer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/apt/sources.list.d/elementary.list&#xA;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&#xA;$ cat /etc/apt/sources.list.d/patches.list        &#xA;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-08-17T07:48:24.327" LastActivityDate="2017-08-17T07:48:24.327" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12879" PostTypeId="2" ParentId="12570" CreationDate="2017-08-01T07:28:02.360" Score="0" Body="&lt;p&gt;It's grayed out for me too. I think the easiest would be to re-add these accounts...Still I'm not sure why there's no way of changing it inside Geary.&#xA;Did you open a bug report for that? If not you could do that.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-01T07:28:02.360" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12880" PostTypeId="2" ParentId="12875" CreationDate="2017-08-01T07:37:07.663" Score="2" Body="&lt;p&gt;Click on the network icon in the top bar and select Network Settings (at the bottom of the menu).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the Edit Connections button at the bottom of the Network window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the new dialog, scroll down until you see the hotspot you created and click on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Delete button should then become active, click on that and you will be asked to confirm you want to delete the connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After confirmation the hotspot should be removed.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-08-01T07:37:07.663" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12881" PostTypeId="1" CreationDate="2017-08-01T08:31:58.457" Score="2" ViewCount="1529" Body="&lt;p&gt;how can I set up my screen, so it wouldn't look so oversized?&#xA;i've got 15&quot; screen with 1366x768 resolution, but now all the icons, header bar, wingpanel are looking big. is there a way to set all of it to 75% size? I know Windows10 has got something similar&lt;/p&gt;&#xA;" OwnerUserId="8779" LastActivityDate="2017-10-30T12:25:43.110" Title="Desktop resolution" Tags="|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12882" PostTypeId="2" ParentId="12881" CreationDate="2017-08-01T11:13:16.210" Score="2" Body="&lt;p&gt;open terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --query &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the output look for the name of your primary monitor, for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767&#xA;eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 290mm x 170mm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so its eDPI!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now again in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDPI --scale 1.25x1.25&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;put your Device name where eDPI is for me. You can experiment with the scaling factor. 1x1 is normal, 1.5x1.5 is 50% as big.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you like what you see you can add the command that suits you to Startup-Applications (system-settings-&gt;applications-&gt;the right tab).&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-01T11:13:16.210" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12883" PostTypeId="2" ParentId="12877" CreationDate="2017-08-01T12:01:36.613" Score="1" Body="&lt;p&gt;After changing your keyboard settings, do in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -query&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should see the options you have chosen,e.g:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    setxkbmap -query&#xA;rules:      evdev&#xA;model:      pc105&#xA;layout:     de&#xA;variant:    mac&#xA;options:    terminate:ctrl_alt_bksp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can try setting this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -model pc105 -layout pl -option 'lv3:lwin_switch'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with your options. I'm not sure if this is going to be permanent, try it out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it's not permanent, there are 2 options:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;changing /etc/default/keyboard:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A text-file will be opened where you can write your input. This should be loaded upon startup.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;putting your command in Startup-Aplications:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Go to System-Settings-&gt;Applications and add a new Startup-Apllication with your command above, eg:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -model pc105 -layout pl -option 'lv3:lwin_switch'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;you can see all the possible layouts and options in this file: /usr/share/X11/xkb/rules/base.lst&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-08-03T07:24:05.683" LastActivityDate="2017-08-03T07:24:05.683" CommentCount="23" ContentLicense="CC BY-SA 3.0" />
  <row Id="12884" PostTypeId="2" ParentId="12314" CreationDate="2017-08-01T14:13:42.203" Score="1" Body="&lt;p&gt;Per the directions on Google's support site (&lt;a href=&quot;https://support.google.com/chrome/answer/1649523?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/chrome/answer/1649523?hl=en&lt;/a&gt;), I added some extra code that seems to resolve this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DESKTOP_SESSION=pantheon&#xA;XDG_CURRENT_DESKTOP=Pantheon &#xA;XDG_RUNTIME_DIR=/run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would check your values for those variables first, but it works for me, although the behavior is odd -- it seems to create another virtual workspace when I connect, and not literally remote control the desktop. Nevertheless, I'm able to perform any action I want on the remote system.&lt;/p&gt;&#xA;" OwnerUserId="11697" LastEditorUserId="578" LastEditDate="2017-08-01T22:43:05.553" LastActivityDate="2017-08-01T22:43:05.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12885" PostTypeId="1" CreationDate="2017-08-01T14:30:32.763" Score="0" ViewCount="609" Body="&lt;p&gt;Totally new to elementary OS and Linux, but I have been working hard to try to understand more about this wonderful world of Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will cut it short - my wifi was not working on Windows 10, mainly because airplane mode would not shut off. For some reason, I went ahead and still did a clean install of elementary OS. Mind you, this is a project laptop, but I would still like it to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I did some research and found some lines of code and now on elementary OS, airplane mode is not on anymore, but WIFI is disabled. Running &quot;SUDO RFKILL UNBLOCK ALL&quot; is not getting any results. RFKILL List is showing a hardblock on the wireless lan phy0... I am totally lost. I did some research, and I am slowly learning, but I am way too lost at this moment. Can anyone help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, any advice as to how to enable wifi and change that hardblock would be great. Does a hardblock mean that something is blocking the connection hardware wise? The toggle for my laptop is on, and it has always been on. I have also removed, cleaned, and reattached the wifi card. I am totally lost here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;HELP! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="11696" LastEditorUserId="308" LastEditDate="2018-08-07T16:49:10.680" LastActivityDate="2019-05-05T08:01:10.200" Title="Wireless Connection disabled in elementary OS on Lenovo t430s. Help?" Tags="|wifi|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12886" PostTypeId="2" ParentId="12862" CreationDate="2017-08-01T18:59:45.150" Score="0" Body="&lt;p&gt;I guess you are not able to install app center for the problem with Merged List.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to follow &lt;a href=&quot;https://askubuntu.com/questions/30072/how-do-i-fix-a-problem-with-mergelist-or-status-file-could-not-be-parsed-err&quot;&gt;these steps&lt;/a&gt; to resolve the Merge List before installing app center again.&lt;/p&gt;&#xA;" OwnerUserId="6634" LastActivityDate="2017-08-01T18:59:45.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12888" PostTypeId="1" CreationDate="2017-08-02T01:27:03.257" Score="1" ViewCount="1644" Body="&lt;p&gt;I have installed Cisco Packet Tracer 7.1 in my elementary OS, but when I want to launch it only says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Starting Packet Tracer 7.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...and the program didn't launch. For Ubuntu there are many possible solutions but none works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;" OwnerUserId="9269" LastEditorUserId="84" LastEditDate="2018-05-06T17:59:14.370" LastActivityDate="2018-05-06T17:59:14.370" Title="Cisco Packet Tracer on elementary OS" Tags="|applications|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12890" PostTypeId="1" CreationDate="2017-08-02T04:32:13.137" Score="2" ViewCount="957" Body="&lt;p&gt;When I set my power setting to blank the screen after a set amount of time when the screen goes blank it logs me out of elementary. When I log back in I have to restart my applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary is a wonderful OS but I just can't see a way of fixing this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is getting frustrating as if I have a long download or upload I leave it going over night but they have been cut out due to this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="11706" LastEditorUserId="242" LastEditDate="2017-09-02T19:46:21.990" LastActivityDate="2017-09-03T07:37:48.177" Title="elementary logs out when screen goes blank" Tags="|display|greeter|power|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12891" PostTypeId="2" ParentId="11779" CreationDate="2017-08-02T05:53:16.280" Score="1" Body="&lt;p&gt;First enter &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Watch the video in the  link below it worked on my laptop, I too had that touchpad problem press &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+t for opening the terminal and do what as suggested in the video and restart the system the touch pad works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://m.youtube.com/watch?v=ZAPSrbZvsjk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://m.youtube.com/watch?v=ZAPSrbZvsjk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it works!!&lt;/p&gt;&#xA;" OwnerUserId="11709" LastEditorUserId="686" LastEditDate="2017-08-03T13:18:54.577" LastActivityDate="2017-08-03T13:18:54.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12893" PostTypeId="2" ParentId="12890" CreationDate="2017-08-02T07:24:35.603" Score="1" Body="&lt;p&gt;I'm not sure if this will be the solution for your problem, but you could try turning of the Screen Lock (normaly it shouldn't exit applications).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Got to System-Settings-&gt;Security-&gt;Locking:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2sikS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2sikS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also try to set &quot;Sleep when inactive&quot; to &quot;never&quot; under Energy&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-09-03T07:37:48.177" LastActivityDate="2017-09-03T07:37:48.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12894" PostTypeId="2" ParentId="12890" CreationDate="2017-08-02T08:37:18.620" Score="1" Body="&lt;p&gt;You could use Terminal and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.lockdown disable-lock-screen true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or use dconf editor and go to: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;org &gt; gnome &gt; desktop &gt; lockdown &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and set  &lt;code&gt;disable-lock-screen&lt;/code&gt; on true&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way you still can have the screen sleep and also enter suspend but still wake up directly into your desktop (without lock screen). &lt;/p&gt;&#xA;" OwnerUserId="4584" LastEditorUserId="4584" LastEditDate="2017-08-02T09:07:08.527" LastActivityDate="2017-08-02T09:07:08.527" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12896" PostTypeId="2" ParentId="12856" CreationDate="2017-08-02T15:07:32.873" Score="2" Body="&lt;p&gt;The contents of &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; from elementary OS 0.4.1 Loki follow.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#deb cdrom:[elementary OS 0.4.1 _Loki_ - Stable amd64 (20170517)]/ xenial contrib main non-free&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial universe&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial universe&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to  &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;# deb-src http://us.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu xenial partner&#xA;# deb-src http://archive.canonical.com/ubuntu xenial partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu xenial-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security universe&#xA;deb http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11715" LastActivityDate="2017-08-02T15:07:32.873" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12898" PostTypeId="2" ParentId="12256" CreationDate="2017-08-02T18:52:36.893" Score="0" Body="&lt;p&gt;Updating to kernel 4.10.0-28-generic fixes the issue. The touchpad works on boot itself.&lt;/p&gt;&#xA;" OwnerUserId="10016" LastActivityDate="2017-08-02T18:52:36.893" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12902" PostTypeId="1" CreationDate="2017-08-02T22:52:43.247" Score="0" ViewCount="14323" Body="&lt;p&gt;Don't know actually what i made to system, it now stuck at pantheon-greeter. Though i have no installation media around please help me to resolve this issue by reinstall or anything via terminal. &#xA;&lt;strong&gt;Actual Problem&lt;/strong&gt; - &quot;After successful login to greeter black screen shown up for 2 seconds and then back to greeter login&quot;&lt;/p&gt;&#xA;" OwnerUserId="11720" LastActivityDate="2018-11-30T16:27:17.823" Title="Reinstall or Reset Elementary OS loki 0.4.1 completely" Tags="|release-loki|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12905" PostTypeId="1" AcceptedAnswerId="12907" CreationDate="2017-08-03T04:50:41.483" Score="1" ViewCount="214" Body="&lt;p&gt;I am not sure what I did in order to end up with the Gnome theme, but the beautiful elementary OS desktop is gone and now I'm seeing the Gnome theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried purging &lt;code&gt;elementary-desktop&lt;/code&gt;, reinstalling it and rebooting, but it did not help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See screenshots below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6P9La.jpg&quot; alt=&quot;screenshot 1&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/CGB20.png&quot; alt=&quot;screenshot 2&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="9047" LastEditorUserId="84" LastEditDate="2018-05-06T17:57:36.013" LastActivityDate="2018-05-06T17:57:36.013" Title="Theme unexpectedly changed to Gnome" Tags="|release-loki|gnome|desktop-environment|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="12906" PostTypeId="2" ParentId="11527" CreationDate="2017-08-03T04:54:35.723" Score="1" Body="&lt;p&gt;You can fix the issue with the command line (in a terminal window):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nmcli radio wifi on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9361" LastEditorUserId="578" LastEditDate="2017-08-03T08:08:44.270" LastActivityDate="2017-08-03T08:08:44.270" CommentCount="1" CommunityOwnedDate="2017-08-03T04:54:35.723" ContentLicense="CC BY-SA 3.0" />
  <row Id="12907" PostTypeId="2" ParentId="12905" CreationDate="2017-08-03T05:49:34.193" Score="2" Body="&lt;p&gt;Maybe the elementary-theme isn't deleted, but it just changed it somehow?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try opening terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface gtk-theme elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set elementary as your theme again. If you don't want to use the command line you could install Gnome-tweak-tool or elementary tweak for changing.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-08-03T05:53:49.497" LastActivityDate="2017-08-03T05:53:49.497" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12908" PostTypeId="1" AcceptedAnswerId="12914" CreationDate="2017-08-03T08:16:30.570" Score="0" ViewCount="198" Body="&lt;p&gt;I do not keep the app in the dock and when there are new updates, it goes to the dock with a small red counter. The thing is that when I install the updates, the icon remains there with its counter. Any ideas on how to fix that ?&lt;a href=&quot;https://i.stack.imgur.com/NKXz9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NKXz9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7537" LastActivityDate="2017-08-03T17:53:48.640" Title="AppCenter icon remains in dock even after all the updates have been installed" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12909" PostTypeId="1" CreationDate="2017-08-03T09:53:34.430" Score="0" ViewCount="398" Body="&lt;p&gt;During boot up I get for a fraction of a second a black screen with three lines of errors. Otherwise the system works perfectly, boots ok and operates very fast. Should I bother about those lines? Is there a way to stop the screen and read what the info is? Thanks for a kind suggestion.&lt;/p&gt;&#xA;" OwnerUserId="11694" LastActivityDate="2019-08-25T00:01:35.487" Title="Boot up black screen" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12910" PostTypeId="1" CreationDate="2017-08-03T10:21:05.953" Score="0" ViewCount="517" Body="&lt;p&gt;How can I change the keyboard shortcut for launching the applications menu? I have an extended Mac keyboard and currently have to Hold Ctrl+Alt+Space. I'd like it to be Alt+Space&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2023-03-29T07:39:37.467" Title="Keyboard Shortcut for application chooser" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12911" PostTypeId="1" CreationDate="2017-08-03T12:33:22.367" Score="0" ViewCount="79" Body="&lt;p&gt;During a manual update last week, I saw some mesa-related packages kept back, but I dind't do anything about it. Yesterday I updated via AppCenter and today I've discovered that VLC is missing. Now I want to recover it, but when I try to install it I get the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; vlc : Depends: libgles1-mesa (&amp;gt;= 7.8.1) but it is not going to be &#xA;installed or libgles1&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have little experience in fixing broken/kept-back packages. Any recommendation?&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2017-08-03T12:33:22.367" Title="After kept back packages, AppCenter deleted VLC" Tags="|vlc|package|" AnswerCount="0" CommentCount="5" ClosedDate="2019-04-25T19:18:40.323" ContentLicense="CC BY-SA 3.0" />
  <row Id="12914" PostTypeId="2" ParentId="12908" CreationDate="2017-08-03T17:53:48.640" Score="2" Body="&lt;p&gt;This is an AppCenter bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check Github Issue &lt;a href=&quot;https://github.com/elementary/appcenter/issues/390&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;390&quot;&gt;#390&lt;/a&gt; to read more about it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a temporary fix, you can remove the notifications by issuing &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;on a terminal window.&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-08-03T17:53:48.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12915" PostTypeId="2" ParentId="12909" CreationDate="2017-08-03T18:56:00.627" Score="1" Body="&lt;p&gt;Execute on terminal &lt;code&gt;dmesg | grep error&lt;/code&gt;. That's probably going to show those errors you see at boot. You can just use &lt;code&gt;dmesg&lt;/code&gt; to see all the output and search manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your errors are like:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;usb 1-1.4: string descriptor 0 read error: -22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then it should be fine, otherwise you can create a new question or ask me in the comments :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-08-03T18:56:00.627" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12916" PostTypeId="2" ParentId="12902" CreationDate="2017-08-03T18:59:36.603" Score="1" Body="&lt;p&gt;Let's start this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doensn't solve it, add a comment with the errors that appear.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-08-03T18:59:36.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12917" PostTypeId="1" AcceptedAnswerId="15103" CreationDate="2017-08-03T20:31:04.043" Score="0" ViewCount="91" Body="&lt;p&gt;Recently I got a ThinkPad T460S with Dell UltraSharp U2715H for working. &#xA;I tried to work with the lid of the laptop closed and working with the monitor as the primary screen, it work great but when I try to &quot;lock&quot; the session the computer looks like it get &quot;suspended&quot; and I am only available to &quot;wake up&quot; when I open the lid. After the screen &quot;wake up&quot; only appears the signal in the laptop, no evidence on the &quot;main&quot; monitor until I unlock the computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.D.: I am using a &quot;ThinkPad 90W Ultra Dock&quot; (dock station) and I am not sure if it has something to do...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.D.2.: I want archive to unlock the computer from my monitor without opening the lid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks :)&lt;/p&gt;&#xA;" OwnerUserId="6875" LastActivityDate="2018-03-14T17:05:00.230" Title="Unlock session with connected monitor when the laptop lid is closed" Tags="|display|laptop|monitoring|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12918" PostTypeId="1" CreationDate="2017-08-03T21:46:59.860" Score="1" ViewCount="392" Body="&lt;p&gt;elementary OS is a gorgeous operating system, to the point where I have donated multiple times to it. However, there is something driving me nuts that  will ultimately lead me to abandon it if not fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Samsung Series 9 laptop (NP900X3B). This laptop has an Intel i915 graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time I connect a second monitor to it, using the micro HDMI port, and lock / unlock my screen, I get a kernel crash and complete freeze of the system that forces me to reboot it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I always work with two monitors and always lock my desktop when I walk away from my desk. As a result, since I installed elementary OS, I'm rebooting my laptop 3-6 times per day during business hours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the version of the kernel I'm currently running:&#xA;Linux galaxy 4.10.0-27-generic #30~16.04.2-Ubuntu SMP Thu Jun 29 16:07:46 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output of lshw showing the information about the VGA controller and the kernel module in use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])&#xA;    Subsystem: Samsung Electronics Co Ltd 2nd Generation Core Processor Family Integrated Graphics Controller [144d:c0cd]&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 31&#xA;    Memory at f0000000 (64-bit, non-prefetchable) [size=4M]&#xA;    Memory at e0000000 (64-bit, prefetchable) [size=256M]&#xA;    I/O ports at 3000 [size=64]&#xA;    [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]&#xA;    Capabilities: &#xA;    Kernel driver in use: i915&#xA;    Kernel modules: i915&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the crash information on kernel.log: &lt;a href=&quot;https://pastebin.com/ffhDQAM3&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/ffhDQAM3&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When the crashes happen I see these messages on the screen:&#xA;[drm:intel_cpu_fifo_underrun_irq_handler [i915]] &lt;em&gt;ERROR&lt;/em&gt; CPU pipe A FIFO underrun&#xA;[drm:ironlake_crtc_enable [i915]] &lt;em&gt;ERROR&lt;/em&gt; mode set failed: pipe A stuck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used the Intel tools to update the i915 module / driver to its latest version, as per: &lt;a href=&quot;https://pastebin.com/hguNVG3W&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/hguNVG3W&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note that I run Ubuntu 16.04 in this laptop before and never had these issues. I thought for a moment that the kernel upgrade from 4.8 to 4.10 could be the cause. I downgraded the kernel to 4.8 to test this hypothesis, but had no success, so I switched back to 4.10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how I could fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;Bruno&lt;/p&gt;&#xA;" OwnerUserId="11728" LastActivityDate="2017-08-03T21:46:59.860" Title="Frequent crashes with Intel i915 and second HDMI monitor" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12919" PostTypeId="2" ParentId="12902" CreationDate="2017-08-04T01:45:11.453" Score="2" Body="&lt;p&gt;(to add on to the first answer, as I'm unable to comment :eye_roll:)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To access a terminal, as you can't enter via GUI, use &lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;Alt&lt;/code&gt;+&lt;code&gt;F1&lt;/code&gt;, and proceed to reinstall using &lt;code&gt;sudo apt install --reinstall elementary-desktop&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2017-08-04T01:45:11.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12921" PostTypeId="1" AcceptedAnswerId="12922" CreationDate="2017-08-04T02:27:28.067" Score="0" ViewCount="715" Body="&lt;p&gt;After running the updates today I think appcentre said there were 8 updates, it seemed to hang the process while running 2 &quot;operating system&quot; updates. I waited a few hours for it to finish (5 I think) but it never did. I tried to reboot the system but it didn't respond so I (against my better wisdom) forced the appcentre closed and force rebooted. Now I can only boot into emergency mode. I'm not sure what to do now. I'm reading that I should try a live distro and try to fschk the root partition.  I'm about to try that now. &#xA;Anyone know what to try here, or need more info?&#xA;I can't seem to get network access in emergency mode; at least I don't know how to...&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2019-08-10T11:47:31.993" Title="Latest updates froze - reboot to emergency mode" Tags="|system|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12922" PostTypeId="2" ParentId="12921" CreationDate="2017-08-04T03:28:55.570" Score="0" Body="&lt;p&gt;Commenting out the mount point listed in the error in my fstab solved my problem. I don't have a clue why this became an issue today as I've had that for many many months.  Probably over a year with that setting.&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2017-08-04T03:28:55.570" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12923" PostTypeId="2" ParentId="12876" CreationDate="2017-08-04T09:13:47.870" Score="0" Body="&lt;p&gt;You can use Boot-Repair to solve most problems regarding grub and boot.&#xA;If you still have the elementary live usb, boot it and then follow this. Otherwise download a &lt;a href=&quot;https://sourceforge.net/p/boot-repair-cd/home/Home/&quot; rel=&quot;nofollow noreferrer&quot;&gt;boot repair disk&lt;/a&gt;, install it on a live usb and run it to fix your boot problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, going back to the first option, to install and run boot-repair on your elementary live usb you need to open a terminal and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt-get update&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then just click on &lt;code&gt;Recommended repair&lt;/code&gt; and done :)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Boot-Repair&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-08-04T09:13:47.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12924" PostTypeId="2" ParentId="12863" CreationDate="2017-08-04T09:28:33.093" Score="1" Body="&lt;p&gt;You have the option to dim the display automatically when you aren't using it (on battery).&lt;br&gt;&#xA;Also you can suspend your laptop automatically, saves much more energy than turning the screen off, and it takes just a few seconds to load everything again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Brightness has nothing to do with plugged in / battery so it's good where it is now. I mean, you change the brightness when you can't see the screen well, don't you? It has nothing to do with the power input.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2017-08-04T09:28:33.093" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12926" PostTypeId="1" CreationDate="2017-08-04T12:42:56.263" Score="1" ViewCount="598" Body="&lt;p&gt;Firstly thank you to everybody that contributes to Elementary OS, what a great product.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help, I have limited bandwidth which is costly where I am. I have tried numerous ways of disabling the automatic background downloading of updates:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I've uninstalled the unattended-upgrades package and Appcenter &lt;/li&gt;&#xA;&lt;li&gt;I've removed all the files that seem to be related to Apt from the&#xA;/etc/cron.daily | .weekly and .monthly folders.&lt;/li&gt;&#xA;&lt;li&gt;I've removed /usr/lib/apt/apt.systemd.daily&lt;/li&gt;&#xA;&lt;li&gt;I've run: &#xA;systemctl stop apt-daily.timer &#xA;systemctl disable apt-daily.timer&#xA;systemctl daemon-reload&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Still when I run apt upgrade I notice that package updates have been downloaded, they are not installed, but the &quot;Need to get xx MB/xxx MB of archives&quot; message reflects that the archives are being downloaded somehow in the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realise that this is a good practice, but it costs me money and I need to be able to update only when convenient.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much in advance.&lt;/p&gt;&#xA;" OwnerUserId="11736" LastActivityDate="2017-09-06T01:25:51.117" Title="Prevent Background Downloading of updates" Tags="|updates|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12927" PostTypeId="1" AcceptedAnswerId="12932" CreationDate="2017-08-04T13:09:17.177" Score="1" ViewCount="40" Body="&lt;p&gt;I have followed the instructions at the Elementary Getting Started (&lt;a href=&quot;https://elementary.io/docs/code/getting-started#Adding-Translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;Translations&lt;/a&gt;)&#xA;to set up the translations and I have a few translated languages including French in the po directory (fr.po). I can also see the file /usr/share/locale/fr/LC_MESSAGES/bookworm.mo is present. However when I run Bookworm with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANGUAGE=fr bookworm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I dont see the translated strings in french. Only the About Dialog has the translations showing up. Using the same command with Noise works great and I have compared the translations and CMakeLists for Noise but could not find any differences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The bookworm code is on &lt;a href=&quot;https://github.com/babluboy/bookworm&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub&lt;/a&gt; for anyone wanting to take a look at the CMakeFiles.txt.&#xA;Appreciate any pointers on what I may be doing wrong in the code for the translated strings not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Xe9iF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xe9iF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="613" LastEditDate="2017-08-04T13:27:39.607" LastActivityDate="2017-08-05T14:34:15.707" Title="Language Translations not working in Bookworm" Tags="|release-loki|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12928" PostTypeId="2" ParentId="12885" CreationDate="2017-08-04T15:44:45.297" Score="0" Body="&lt;p&gt;This might seem silly, but doesn't a hard block mean that there is a physical button or switch on the laptop that turns off all radios? You said that yours is on, but maybe it's broken in the off position?  That might explain why it's not working in Windows 10 too.  Also check that wifi is enabled in the BIOS.&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2017-08-04T15:44:45.297" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12929" PostTypeId="1" CreationDate="2017-08-04T17:40:53.630" Score="1" ViewCount="568" Body="&lt;p&gt;Is there a way to use picture in picture feature on elementary os Loki? I want to make a video call using skype with this function.&lt;/p&gt;&#xA;" OwnerUserId="11739" LastActivityDate="2017-08-04T17:40:53.630" Title="PIcture in Picture" Tags="|release-loki|system|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12930" PostTypeId="1" AcceptedAnswerId="19352" CreationDate="2017-08-05T02:54:02.400" Score="0" ViewCount="588" Body="&lt;p&gt;I need a more robust Terminal emulator, hence Tilix. However, I miss the option to open the terminal in the chosen directory under pantheon-files. Is it possible to add a contractor so to achieve this result?&lt;/p&gt;&#xA;" OwnerUserId="132" LastEditorUserId="132" LastEditDate="2017-08-07T08:31:31.560" LastActivityDate="2019-07-14T16:45:59.743" Title="Open With... Tilix" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12931" PostTypeId="1" CreationDate="2017-08-05T06:45:18.197" Score="0" ViewCount="56" Body="&lt;p&gt;With Atom in fullscreen mode, switching workspaces to the ones adjacent to to the workspace Atom is in is abrupt. By abrupt I mean that it lacks the smooth moving away of one workspace to the left/right and the other moving in to fill the screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I can move away from the Atom workspace with the proper transition, it is moving back into it that results in it appearing abruptly without any transition at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything I can do to fix this or is it an issue with Atom itself that needs to be dealt with upstream?&lt;/p&gt;&#xA;" OwnerUserId="8040" LastActivityDate="2017-08-23T19:14:43.327" Title="Switching workspaces with fullscreen Atom is abrupt" Tags="|applications|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12932" PostTypeId="2" ParentId="12927" CreationDate="2017-08-05T14:34:15.707" Score="2" Body="&lt;p&gt;This issue was due to a line in the code pointing at a wrong place for the translations:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Intl.bindtextdomain(GETTEXT_PACKAGE, &quot;./locale&quot;);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Many thanks to Corentin Noel for spotting the issue.&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2017-08-05T14:34:15.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12933" PostTypeId="1" CreationDate="2017-08-05T15:26:55.927" Score="0" ViewCount="1311" Body="&lt;p&gt;i've been following ubuntu since 9.04 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;installing it and trying it - then found gnome&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now that gnome is going to be standard desktop come next release - i thought i would like to be involved in helping maintain and improve the platform&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so - i try to find an OO language for Gnome and up pops Vala&lt;/p&gt;&#xA;&#xA;&lt;p&gt;start teaching myself and then read the forums that Vala is dead&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like it it - it's an elegant language (even if it does generate C - which is a good thing)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i used to work for unisys and the &quot;language&quot; now known as Jade used to be a linc program generating cobol code&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i'd like to help&lt;/p&gt;&#xA;" OwnerUserId="11742" LastActivityDate="2017-08-06T19:28:41.200" Title="is vala dead? because it's a nice language" Tags="|development|" AnswerCount="1" CommentCount="2" ClosedDate="2017-08-15T17:33:14.653" ContentLicense="CC BY-SA 3.0" />
  <row Id="12935" PostTypeId="1" AcceptedAnswerId="13001" CreationDate="2017-08-05T23:22:59.037" Score="0" ViewCount="179" Body="&lt;p&gt;I'm not sure if this is necessarily an elementary issue or not, but I'm guessing it might somewhat be. I just installed &lt;a href=&quot;https://ghost.org/downloads/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ghost's (Electron) Desktop App&lt;/a&gt; using Eddy (as I've successfully done with other apps) and everything seemed to install fine. However, when I click on the app icon in the dock the icon bounces up, but then nothing happens – no app loads up. Any thoughts on why that might be?&lt;/p&gt;&#xA;" OwnerUserId="4844" LastActivityDate="2017-08-13T08:44:19.477" Title="Any thoughts on why the Ghost (Electron) Desktop App won't load up?" Tags="|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12939" PostTypeId="2" ParentId="12933" CreationDate="2017-08-06T19:28:41.200" Score="5" Body="&lt;p&gt;Nope. :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Vala is being maintained, and elementary plans to continue to use it (and contribute back when needed!) for the foreseeable future. As Michael Cotanzaro &lt;a href=&quot;https://blogs.gnome.org/mcatanzaro/2017/02/19/on-problems-with-vala/&quot; rel=&quot;noreferrer&quot;&gt;has written&lt;/a&gt;, Vala is still the best choice for GNOME and GTK+ development. It's a purpose-built language for GTK+, after all, which means its bindings and integration are second-to-none.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the future if a language like Rust or Go exceeds the tight integrations into the GNOME stack with bindings and lots of example code, then maybe those languages would make more sense. But right now Vala is in an excellent position and the rumors of its death (mostly from a single developer's personal blog post) are greatly exaggerated.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-08-06T19:28:41.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12942" PostTypeId="2" ParentId="12926" CreationDate="2017-08-07T00:41:04.363" Score="-1" Body="&lt;p&gt;On Ubuntu 16.04, (on which is based Loki, so maybe it works)&#xA;you could use&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ sudo systemctl mask apt-daily.service&lt;br&gt;&#xA;  $ sudo systemctl disable apt-daily.timer&lt;br&gt;&#xA;  $ sudo systemctl disable unattended-upgrades &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and then update/upgrade manually when you see fit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check more here: &lt;a href=&quot;https://www.hiroom2.com/2016/05/18/ubuntu-16-04-auto-apt-update-and-apt-upgrade/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.hiroom2.com/2016/05/18/ubuntu-16-04-auto-apt-update-and-apt-upgrade/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2017-08-07T00:41:04.363" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12943" PostTypeId="2" ParentId="12910" CreationDate="2017-08-07T00:50:46.740" Score="1" Body="&lt;p&gt;Have you tried changing key binding the easy way ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System settings --&gt; Keyboard --&gt; Shortcuts --&gt; Applications --&gt; App Launcher&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and back in may be required to take effect.&lt;/p&gt;&#xA;" OwnerUserId="6445" LastEditorUserId="6445" LastEditDate="2017-08-07T00:57:42.930" LastActivityDate="2017-08-07T00:57:42.930" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12944" PostTypeId="2" ParentId="12930" CreationDate="2017-08-07T08:27:52.677" Score="1" Body="&lt;p&gt;Did you try the sub menu 'open in' in pantheon on a directory and choose 'terminal'?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gcDuW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gcDuW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2986" LastActivityDate="2017-08-07T08:27:52.677" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12945" PostTypeId="2" ParentId="9897" CreationDate="2017-08-07T09:52:24.757" Score="1" Body="&lt;p&gt;Credits : &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bulletmark&lt;/a&gt; and &lt;a href=&quot;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;Neal Fennimore&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow Neil Fennomore's solution given on his page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, installing libinput-gesture, install xdotools and wmctrl&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;apt install xdotools wmctrl&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;[Bulletmark's page] says :&#xA;&quot;The default gestures are in /etc/libinput-gestures.conf. If you want to create your own custom gestures then copy that file to ~/.config/libinput-gestures.conf and edit it.&quot; So I had to additionally execute (and I use 'Gedit') :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cp /etc/libinput-gestures.conf ~/.config/&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gedit ~/.config/libinput-gestures.conf.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and then append required lines for my gestures to the file. For eg. :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gesture swipe up 3 xdotool key super+Up &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;More gesture commands could be found on Neal's page.&lt;/p&gt;&#xA;" OwnerUserId="11762" LastActivityDate="2017-08-07T09:52:24.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12947" PostTypeId="1" CreationDate="2017-08-07T15:23:06.403" Score="0" ViewCount="353" Body="&lt;p&gt;I installed elementary os loki recently. There was a problem that the wifi kept asking for password again and again. I run a terminal command to disable 802.11n. The command solved that problem but later the wifi kept losing the internet connection if i did not use it for just 10 sec. If I download something then it is working perfectly but while browsing if I pause on a page, it loses internet connection and then I have to restart the wifi. The main problem is that I reinstalled elementary but that too did not solve this problem. Thanks in advance.&#xA;My wifi adaptor is BCM43142.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;iwconfig&#xA;&lt;code&gt;&#xA;wlo1      IEEE 802.11  ESSID:&quot;TP-LINK_806A&quot;&#xA;          Mode:Managed  Frequency:2.437 GHz  Access Point: EC:08:6B:F6:80:6A&#xA;          Retry short limit:7   RTS thr:off   Fragment thr:off&#xA;          Power Management:off&#xA;lo        no wireless extensions.&#xA;enp2s0    no wireless extensions.&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="11765" LastEditorUserId="11765" LastEditDate="2017-08-07T17:36:53.760" LastActivityDate="2019-08-26T11:00:41.213" Title="Wifi Internet access problem" Tags="|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12948" PostTypeId="2" ParentId="12848" CreationDate="2017-08-07T16:59:01.063" Score="1" Body="&lt;p&gt;There is a way to downgrade HWE graphical stack to Xenial default (however, it will be maintained until 2021).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Be careful and follow these commands at your own risk!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firstly, you should remove HWE graphical packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove xserver-xorg-core-hwe-16.04 xserver-xorg-input-all-hwe-16.04 xserver-xorg-video-all-hwe-16.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This command will remove Xorg and &lt;code&gt;elementary-desktop&lt;/code&gt; metapackage. In total 19 or 20 packages will be removed. Then, install older version of Xorg and reinstall &lt;code&gt;elementary-desktop&lt;/code&gt; metapackage (don't reboot your PC before running this command!):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-desktop xserver-xorg-core&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot and enjoy ;-)&lt;/p&gt;&#xA;" OwnerUserId="160" LastActivityDate="2017-08-07T16:59:01.063" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12952" PostTypeId="1" CreationDate="2017-08-07T21:06:41.487" Score="0" ViewCount="540" Body="&lt;p&gt;Today i took the jump to Linux on a little home media PC. Trying to install Kodi Krypton 17.3 but i keep only getting the old version?&#xA;I followed this guide &lt;a href=&quot;http://kodi.wiki/view/HOW-TO:Install_Kodi_for_Linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kodi.wiki/view/HOW-TO:Install_Kodi_for_Linux&lt;/a&gt; but it does not matter what i do i am unable to get krypton installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I came across this &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629646&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1629646&lt;/a&gt; and i think i tried this and then re-tried the install but same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone can help, thank you so much in advance.&lt;/p&gt;&#xA;" OwnerUserId="11768" LastActivityDate="2019-12-30T19:02:50.370" Title="Unable to install Kodi Krypton 17.3" Tags="|release-loki|software-installation|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12955" PostTypeId="1" AcceptedAnswerId="12976" CreationDate="2017-08-08T00:47:16.633" Score="1" ViewCount="1936" Body="&lt;p&gt;I'm having a problem with the sound on Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can tell you that is not a hardware malfunction, because in Windows 10, the speakers sound amazing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thing is, with headphones, the sound is excellent. The problem is with the speakers. With the speakers the sound is HORRIBLE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci | grep -i audio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="11772" LastActivityDate="2018-08-18T11:47:26.970" Title="Poor Sound Quality on Loki" Tags="|sound|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12956" PostTypeId="1" CreationDate="2017-08-08T05:18:43.030" Score="0" ViewCount="58" Body="&lt;p&gt;Added xrandr --output eDP-1 --gamma 0.9:0.85:0.9 to the start up commands but its not executing on startup, even when xset m 0/1 0 executes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pic: &lt;a href=&quot;https://i.stack.imgur.com/zgOtC.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/zgOtC.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11773" LastActivityDate="2017-10-09T07:24:53.913" Title="Some startup commands not executing" Tags="|startup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12957" PostTypeId="1" AcceptedAnswerId="12959" CreationDate="2017-08-08T06:45:53.933" Score="1" ViewCount="321" Body="&lt;p&gt;Can we split a vertical window in two equally parts?&#xA;Something like:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/a60Q7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a60Q7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6875" LastActivityDate="2017-10-07T15:10:27.850" Title="Split a vertically window" Tags="|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12958" PostTypeId="2" ParentId="12849" CreationDate="2017-08-08T14:32:03.140" Score="1" Body="&lt;p&gt;I SOLVED THIS BY SIMPLY GOING INTO THE BIOS AND DISABLING SECURE BOOT. Took me a week to find this out, but I hope this helps out anyone with similar issues.&lt;/p&gt;&#xA;" OwnerUserId="11675" LastActivityDate="2017-08-08T14:32:03.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12959" PostTypeId="2" ParentId="12957" CreationDate="2017-08-08T14:36:12.813" Score="1" Body="&lt;p&gt;You can try to use &lt;a href=&quot;https://github.com/ssokolow/quicktile&quot; rel=&quot;nofollow noreferrer&quot;&gt;QuickTile&lt;/a&gt; for this kind of thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;afaik eOS doesn't have native support for this. There's a bounty for it &lt;a href=&quot;https://www.bountysource.com/issues/931574-gala-should-support-better-window-tiling&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, as well.&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-08-08T14:36:12.813" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12960" PostTypeId="1" AcceptedAnswerId="12965" CreationDate="2017-08-09T06:27:45.017" Score="0" ViewCount="147" Body="&lt;p&gt;I recently switched from my antiquated Keyboard and Mouse set (EasyCall Desktop) to the MK710, which uses the M705 mouse.&#xA;Previously, the side tile on the wheel would function as normal on the old mouse. However, the new mouse gives no response to the side tilts.  I don't need anything fancy. Just want the left and right tilts to return their normal functions. Any ideas on whats wrong and how to get this working again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="11779" LastEditorUserId="11779" LastEditDate="2017-08-09T14:16:12.310" LastActivityDate="2017-08-09T15:58:37.343" Title="Logetich M705 Wheel Tilt not functioning" Tags="|mouse|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12961" PostTypeId="2" ParentId="11926" CreationDate="2017-08-09T08:52:35.453" Score="1" Body="&lt;p&gt;If you didn't already, install xbindkeys:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then we'll need to find out whats you mouse-button called (usually Button2, but we'll want to be sure).&#xA;write &#xA;&lt;code&gt;xev |grep button&lt;/code&gt; in terminal. A white window will appear. Do a middle click inside and read the output in terminal, eg:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; state 0x10, button 2, same_screen YES&#xA;state 0x210, button 2, same_screen YES&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So for me its button 2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now write a default xbindkey-file with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys --defaults &amp;gt; $HOME/.xbindkeysrc &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit the file with scratch or: &lt;code&gt;nano .xbindkeysrc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look if there's allready an entry for your middle button, edit it or make a new one as following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#show desktop&#xA;&quot;wmctrl -k on&quot;&#xA;   b:2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the file. (with nano it's Ctrl+O).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run xbindkey in terminal. If it's working add xbindkey to your startup-applications.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-09T08:52:35.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12962" PostTypeId="2" ParentId="12876" CreationDate="2017-08-09T09:15:06.160" Score="1" Body="&lt;p&gt;Change the boot order in system bios. i had this problem in my lap. I changed it in my bios settings. Mine is hp laptop. But the problem is same.&lt;/p&gt;&#xA;" OwnerUserId="11780" LastActivityDate="2017-08-09T09:15:06.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12963" PostTypeId="1" AcceptedAnswerId="12968" CreationDate="2017-08-09T13:42:08.343" Score="2" ViewCount="336" Body="&lt;p&gt;How can I change the work-space I am currently on using terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using dconf editor, I have set the dynamic work-space option to false. And have 4 work-spaces as a result. I want to be able to switch between them without the keyboard shortcuts, so that a script can do those for me?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2017-08-10T12:07:26.930" Title="Change workspace from the terminal?" Tags="|release-loki|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12964" PostTypeId="1" CreationDate="2017-08-09T14:32:36.347" Score="1" ViewCount="254" Body="&lt;p&gt;I'm using the Logitech MK710 keyboard. There are additional function keys on the thing, and some work but some do not. For example, the email fn key does open Mail, but the calculator button does not work. Trying to set it in settings does not work. Any ideas how to get these keys working?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="11779" LastActivityDate="2017-09-30T14:44:36.667" Title="Keyboard Shortcut Stuck on Disable" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12965" PostTypeId="2" ParentId="12960" CreationDate="2017-08-09T15:58:37.343" Score="0" Body="&lt;p&gt;Try the following:&#xA;1. install xbindkeys and xte:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xbindkeys xautomation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now write a default xbindkey-file with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xbindkeys --defaults &gt; $HOME/.xbindkeysrc &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Edit the file with scratch or: &lt;code&gt;nano .xbindkeysrc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look if there's allready an entry for your buttons, edit it or make new entrys as following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Tilt Left&#xA;&quot;xte 'key Left'&quot;&#xA;   b:6&#xA;&#xA;#Tilt Right&#xA;&quot;xte 'key Right'&quot;&#xA;   b:7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or vice-versa (depending which number is right and left). The commands are case-sensitive! &#xA;Save the file. (with nano it's Ctrl+O).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run xbindkey in terminal. If it's working add xbindkey to your startup-applications. (System-settings-&gt; Application)&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-09T15:58:37.343" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12966" PostTypeId="1" CreationDate="2017-08-09T16:51:47.507" Score="1" ViewCount="508" Body="&lt;p&gt;Due to my relatively poor vision, I prefer to have large icons and form fields in all of my working environments. I don't need to take it as far as installing Vinux though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Manjaro and other OSes, I can customise the login manager. &#xA;I have just installed elementary OS. While I do understand the desig philosophy of minimal customisability, I would nevertheless like to have large fonts and form field height for the pantheon-greeter screen? How can I achieve this and make it a bit more accessible?  &lt;/p&gt;&#xA;" OwnerUserId="11785" LastEditorUserId="11785" LastEditDate="2017-08-09T18:50:56.667" LastActivityDate="2017-11-05T03:10:04.950" Title="Large font in Pantheon greeter" Tags="|release-loki|greeter|pantheon|fonts|accessibility|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12967" PostTypeId="1" AcceptedAnswerId="12975" CreationDate="2017-08-09T18:54:45.560" Score="1" ViewCount="492" Body="&lt;h2&gt;The issue&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Every few minutes the mouse frezees in it's place, or they keyboard stops responding. this lasts for around 2 or 3 seconds, and returns to normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard does the same thing, but if a key was pressed it keeps auto-repeating (so in the middle of a sentence it suddenly gives you 5 letters of whatever you were typing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It feels like when the mouse or keyboard are low on battery, but it works fine in windows, and it started happening right after a big software update, so I don't think it's a hardware issue.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;My system&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I'm running elementary OS Loki, on a desktop PC with an A4tech wireless mouse+keyboard combo (9100F). It works fine on windows and worked just as well on elementary a few days ago.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;When it started&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;This is happening since a few days ago, when I updated the whole system (apt upgrade). There was a kernel update, some mesa packages, and some elementary updates (haven't updated in some time). I can provide an apt log if it would help, but it's a long list, so it probably won't narrow it down too much.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Troubleshooting&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Maybe it's something related to usb suspension? I'm running on a desktop, so I shouldn't have aggressive power settings doing stuff like that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could the CPU or disk have big spikes which make it unresponsive? I do not notice the HDD light blinking, and I'm not running any software out of the ordinary (VSCode+Chrome+Webpack-dev-server, same as before when it was running ok).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how to try to debug this issue, it feels completely random. How can I get more information about what's happening?&lt;/p&gt;&#xA;" OwnerUserId="10059" LastActivityDate="2018-06-06T15:50:31.503" Title="Wireless Mouse and keyboard combo freezing randomly for a few seconds" Tags="|updates|keyboard|mouse|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12968" PostTypeId="2" ParentId="12963" CreationDate="2017-08-09T20:01:07.977" Score="4" Body="&lt;p&gt;I finally achieved this using the wmctrl command. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wmctrl&#xA;&#xA;wmctrl -d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;gave me output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0  - DG: 1366x768  VP: N/A  WA: 0,30 1366x738  Workspace 1&#xA;1  - DG: 1366x768  VP: N/A  WA: 0,30 1366x738  Workspace 2&#xA;2  * DG: 1366x768  VP: 0,0  WA: 0,30 1366x738  Workspace 3&#xA;3  - DG: 1366x768  VP: N/A  WA: 0,30 1366x738  Workspace 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to get to workspace 0, the command is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -s 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="5831" LastEditDate="2017-08-10T12:07:26.930" LastActivityDate="2017-08-10T12:07:26.930" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12970" PostTypeId="2" ParentId="12956" CreationDate="2017-08-10T05:50:58.047" Score="1" Body="&lt;p&gt;Some commands always needed some delay for me, so try adding sleep 3 &amp;amp;&amp;amp; before the command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other option to try is to make a new file in home (eg. Startup.sh). Open it with scratch and instert:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; #!/bin/bash&#xA;     Your command&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Make the file executable (e.g. with right click-&gt; properties) and put the location of the file in startup applications /home/your name/startup.sh&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can even try combining the two, adding sleep 3 &amp;amp;&amp;amp; before your command in the file.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-10T05:50:58.047" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12972" PostTypeId="1" CreationDate="2017-08-10T08:02:26.517" Score="2" ViewCount="549" Body="&lt;p&gt;I'd like to add git branch name to the terminal prompt string.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;user@machine_name ~/workingdirectory (git_branch_name) $&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried pasting this code into the bashrc file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;parse_git_branch() {&#xA;     git branch 2&amp;gt; /dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/ (\1)/'&#xA;}&#xA;&#xA;export PS1=&quot;\u@\h \[\033[32m\]\w\[\033[33m\]\$(parse_git_branch)\&amp;gt;&amp;gt;&amp;gt;&amp;gt;[\033[00m\] $ &quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, this code overrides pantheon-terminal's default styling, which I want to keep. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can add the git branch name to the prompt string without overriding the default pantheon-terminal prompt string styling?&lt;/p&gt;&#xA;" OwnerUserId="11788" LastEditorUserId="578" LastEditDate="2017-08-11T06:55:24.673" LastActivityDate="2019-05-04T09:02:35.540" Title="How to add git branch name to prompt string" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12974" PostTypeId="2" ParentId="12972" CreationDate="2017-08-10T10:47:33.020" Score="1" Body="&lt;p&gt;I'd suggest something like this add function like you are doing (yours didn't work for me didn't have time to debug):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;function parse_git_branch() {&#xA;   git branch 2&amp;gt; /dev/null | sed --quiet 's/* \(.*\)/(\1) /p'&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export PS1=$PS1'$(parse_git_branch)'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need to do a more complex substitution then you might need to use sed or similar on the defaut eOS PS1 command, but if you replace it entirely you'll need to maybe look at what it does first, to find out out how to get similar functionality with custom behavior.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-08-10T10:47:33.020" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12975" PostTypeId="2" ParentId="12967" CreationDate="2017-08-10T11:41:16.420" Score="0" Body="&lt;p&gt;Try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;echo 2 | sudo tee /sys/bus/usb/devices/*/power/autosuspend &amp;gt;/dev/null&#xA;echo on | sudo tee /sys/bus/usb/devices/*/power/level &amp;gt;/dev/null&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should disable USB-autosuspend.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-10T11:41:16.420" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12976" PostTypeId="2" ParentId="12955" CreationDate="2017-08-10T12:26:30.947" Score="3" Body="&lt;p&gt;First ensure you have &lt;code&gt;Allow louder than 100%&lt;/code&gt; unchecked in the sound settings, as peaking audio is generally the cause of terrible audio quality, and can damage speakers sometimes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second, you can try editing your deamon config file (although back it up it first):&#xA;Local version: &lt;code&gt;~/.config/pulse/daemon.conf&lt;/code&gt;&#xA;System wide version: &lt;code&gt;sudo nano /etc/pulse/daemon.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will probably not have a local version so you can &lt;code&gt;cp /etc/pulse/daemon.conf ~/.config/pulse/daemon.conf&lt;/code&gt; first and then try and edit it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some possible changes (&lt;a href=&quot;https://webcache.googleusercontent.com/search?q=cache:fkN0elCquFgJ:https://forum.manjaro.org/t/solved-terrible-sound-in-linux-much-better-in-windows/8203+&amp;amp;cd=3&amp;amp;hl=en&amp;amp;ct=clnk&amp;amp;gl=us&quot; rel=&quot;nofollow noreferrer&quot;&gt;suggested here&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default-sample-format = float32le&#xA;default-sample-rate = 48000&#xA;alternate-sample-rate = 44100&#xA;default-sample-channels = 2&#xA;default-channel-map = front-left,front-right&#xA;&#xA;default-fragments = 2&#xA;default-fragment-size-msec = 125&#xA;resample-method = soxr-vhq&#xA;enable-lfe-remixing = no&#xA;high-priority = yes&#xA;nice-level = -11&#xA;realtime-scheduling = yes&#xA;realtime-priority = 9&#xA;daemonize = no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now to test new settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pulseaudio -k&#xA;pulseaudio -D&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope that helps!&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-08-10T12:26:30.947" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12977" PostTypeId="2" ParentId="95" CreationDate="2017-08-10T14:14:53.960" Score="1" Body="&lt;p&gt;there is a simpler way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install byobu&#xA;sudo purge-old-kernels&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's all, it will leave 2 kernel versions and remove all others&lt;/p&gt;&#xA;" OwnerUserId="11794" LastActivityDate="2017-08-10T14:14:53.960" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="12979" PostTypeId="2" ParentId="12952" CreationDate="2017-08-10T16:54:55.383" Score="-1" Body="&lt;p&gt;i had the same issue...the app center only had version 15.2 of kodi which shocked me...if it's already installed then i would suggest uninstalling it first then use the terminal to re-install kodi...not sure why but i couldn't get kodi to upgrade until i uninstalled kodi 15.2 first&lt;/p&gt;&#xA;&#xA;&lt;p&gt;k&lt;/p&gt;&#xA;" OwnerUserId="11796" LastActivityDate="2017-08-10T16:54:55.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12981" PostTypeId="2" ParentId="11192" CreationDate="2017-08-11T06:38:12.093" Score="3" Body="&lt;p&gt;You can't install/use the themes from this PPA because they are TOO OLD. (Just look at the upload dates!) They support only the older GTK+ versions of older elementary OS versions. elementary OS Loki runs with GTK+ 3.18, so you can only use themes supporting THIS EXACT GTK Version. Not GTK+ 3.14 (Freya) or earlier, not 3.20 or later (actual Ubuntu/Gnome versions). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is NOT recommended installing a newer GTK version on elementary OS as it WILL break some looks and functionality on your system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are OSX-Arc themes on gnome-look.org that DO support GTK+ 3.18 but they break correct Wingpanel behaviour and will introduce a bug into Pantheon Photos (non refreshing background). &#xA;AFAIK &lt;strong&gt;&lt;a href=&quot;http://fav.me/dbh88n2&quot; rel=&quot;nofollow noreferrer&quot;&gt;OSeArcLight&lt;/a&gt;&lt;/strong&gt; is the only 3rd party theme at the moment that properly supports elementary OS Wingpanel, panel GTK widgets and Photos. Please note that it is still a bit buggy with GTK dialog windows and Granite apps. Otherwise usable. ... I know because I made it. =)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also better not use a PPA just to install a theme. You can simply unpack themes into a hidden ~/.themes folder (or create it in your Home folder first).&lt;/p&gt;&#xA;" OwnerUserId="4584" LastEditorUserId="4584" LastEditDate="2017-08-11T06:45:14.013" LastActivityDate="2017-08-11T06:45:14.013" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="12982" PostTypeId="1" CreationDate="2017-08-11T10:24:43.600" Score="2" ViewCount="2287" Body="&lt;p&gt;I installed the newest version of elementary OS recently on my Thinkpad Carbon second generation. The OS works fine. The only thing is that the computer is not shutting down when asked to. If you choose shut down the device is only logging out. If I want to shut the computer down I have to force the shutdown via the power button. I already did update and upgrade the Ubuntu drivers with no effect.&lt;/p&gt;&#xA;" OwnerUserId="11801" LastEditorUserId="308" LastEditDate="2019-12-19T19:31:51.630" LastActivityDate="2024-01-29T03:07:05.973" Title="elementary OS does not shut down" Tags="|release-loki|shutdown|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="12984" PostTypeId="1" AcceptedAnswerId="12995" CreationDate="2017-08-11T14:20:15.037" Score="-1" ViewCount="46" Body="&lt;p&gt;Added &lt;code&gt;CUSTOM_VAPIS&lt;/code&gt; with &lt;code&gt;vapi/libgtop-2.0.vapi&lt;/code&gt; to &lt;code&gt;vala_precompile()&lt;/code&gt; in CmakeLists.txt and got this error:&#xA;&lt;code&gt;No rules for target '../src/vapi/libgtop-2.0.vapi' ...&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to add vapi files properly?&lt;/p&gt;&#xA;" OwnerUserId="7394" LastEditorUserId="3189" LastEditDate="2017-08-12T09:40:56.197" LastActivityDate="2017-08-12T09:45:06.953" Title="Compiling with custom vapi leads to error" Tags="|development|vala|cmake|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="12985" PostTypeId="1" AcceptedAnswerId="12988" CreationDate="2017-08-11T14:21:19.883" Score="0" ViewCount="375" Body="&lt;p&gt;I am quite new to Linux, only having toyed around with Ubuntu and Elementary OS in VirtualBox before. Would Elementary OS be good for beginners like me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched online a didn't find anything that answered my question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when I was toying around with Elementary OS in VirtualBox, the app store would not open and I couldn't install any applications using apt. Is this just a VBox error? (Please note that I was running a root when this error occurred. [i.e. using sudo su])&lt;/p&gt;&#xA;" OwnerUserId="11803" LastEditorUserId="11803" LastEditDate="2017-08-11T14:38:55.657" LastActivityDate="2017-08-16T15:00:21.110" Title="Is Elementary OS a good OS for Linux Newbies?" Tags="|virtualbox|" AnswerCount="3" CommentCount="0" FavoriteCount="0" ClosedDate="2017-08-20T19:57:12.437" ContentLicense="CC BY-SA 3.0" />
  <row Id="12987" PostTypeId="1" CreationDate="2017-08-11T14:52:00.303" Score="2" ViewCount="258" Body="&lt;p&gt;I installed elementary OS 0.4.1 Loki couple of days ago and everything seems to run fine except this strange problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sl6sa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sl6sa.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The background of multitasking view looks corrupted almost every time after resuming the system from suspend and sometimes the wallpaper also looks the same way. I have Nvidia GTX 660 and the latest driver (nvidia-375) installed from the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="11804" LastEditorUserId="16827" LastEditDate="2019-02-06T13:26:55.810" LastActivityDate="2019-02-06T13:26:55.810" Title="multitasking view problem after suspend" Tags="|display|nvidia|suspend|multitasking-view|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="12988" PostTypeId="2" ParentId="12985" CreationDate="2017-08-11T14:54:38.230" Score="0" Body="&lt;p&gt;If you are running a Live OS in virtual box rather than the installed version than you would experience the issues you are having. In that case I suggest you boot up the live version and install the OS. Reboot and you should be able to install apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To answer your subject, yes elementary is a relatively good linux OS for beginners. Based on Ubuntu 16.04 it's stable and reliable. Though not completely free of issues (as you can see from this StackExchange page). Some other great OSs for beginners are Solus, Mint, Ubuntu, etc.  Solus is relatively issue free and rock solid, while Ubuntu and Mint have very large online communities that are friendly to new users.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-08-15T11:28:38.317" LastActivityDate="2017-08-15T11:28:38.317" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="12989" PostTypeId="2" ParentId="12985" CreationDate="2017-08-11T15:02:15.737" Score="0" Body="&lt;p&gt;The Answer is YES. Although it is easier for users that come from the Apple world you can get used to it without major difficulties. You will have a system: simple, elegant and with wonderful design.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you the article &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Best Linux Distributions For Beginners&#xA;  Last updated June 11, 2017 By Aquil Roshan&gt; &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;published in It's Foss&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/best-linux-beginners/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/best-linux-beginners/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where you can form an opinion about which distribution is more convenient for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an elementary OS user I would like you to give it a try to elementary OS but I think you must know about all the options before choosing any distro. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope to see you here again. ;-)&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-08-11T15:02:15.737" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="12991" PostTypeId="1" CreationDate="2017-08-12T02:58:17.003" Score="0" ViewCount="90" Body="&lt;p&gt;I have tried unsuccessfully to download a print driver for my HP OfficeJet 4655.  &quot;I've tried using sudo apt-get hplip&quot; in the terminal, and I've been to hp website and haven't had any luck.  Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="10581" LastActivityDate="2017-08-12T05:31:05.877" Title="How do I download/install driver for HP Officejet 4655" Tags="|drivers|" AnswerCount="1" CommentCount="0" ClosedDate="2017-08-12T13:43:20.167" ContentLicense="CC BY-SA 3.0" />
  <row Id="12992" PostTypeId="2" ParentId="8153" CreationDate="2017-08-12T03:07:33.143" Score="0" Body="&lt;p&gt;I my self switched from ubuntu and didn't know that this bug exists. but I have found that this bug is actually really old, you can spend some time to read it but in short, there are several patches proposed over the past years, and they are against the specification? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=865&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.freedesktop.org/show_bug.cgi?id=865&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I have no knowledge of Xorg patching, but I guess the patches that are proposed over there can solve it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Didn't want to post this as an answer, but I couldn't comment because of my rep]&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="11806" LastActivityDate="2017-08-12T03:07:33.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12993" PostTypeId="2" ParentId="1415" CreationDate="2017-08-12T05:28:32.560" Score="0" Body="&lt;p&gt;Doesnt seem to be sorted on ELementary os Loki latest my battery shuts the pc down at around 60% doesnt matter if its been charged to 100%. On restart (it wont start without cable plugged in when battery flat) the battery shows 60% so something is amiss.&#xA;[edit] by allowing the battery to flatten on BIOS boot screen to shutdown state, seems to have reset the battery/calibrated as Elementary is now showing 0% on turn on yea!. Later...by inserting charger it upsets calibrate level so I reset again and then did a full charge to 100%. Unfortunately, the indicator does not seem to follow terminal call results eg it will read 80% when terminal results give 40% (or similar) terminal call: &#xA;cat /sys/class/power_supply/BAT0/uevent&#xA;POWER_SUPPLY_NAME=BAT0&#xA;POWER_SUPPLY_STATUS=Discharging&#xA;POWER_SUPPLY_PRESENT=1&#xA;POWER_SUPPLY_TECHNOLOGY=Li-ion&#xA;POWER_SUPPLY_CYCLE_COUNT=0&#xA;POWER_SUPPLY_VOLTAGE_MIN_DESIGN=7400000&#xA;POWER_SUPPLY_VOLTAGE_NOW=7696000&#xA;POWER_SUPPLY_POWER_NOW=7854000&#xA;POWER_SUPPLY_ENERGY_FULL_DESIGN=35952000&#xA;POWER_SUPPLY_ENERGY_FULL=34573000&#xA;POWER_SUPPLY_ENERGY_NOW=14168000&#xA;POWER_SUPPLY_CAPACITY=40&lt;/p&gt;&#xA;" OwnerUserId="1127" LastEditorUserId="1127" LastEditDate="2017-08-13T03:00:24.413" LastActivityDate="2017-08-13T03:00:24.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12994" PostTypeId="2" ParentId="12991" CreationDate="2017-08-12T05:31:05.877" Score="0" Body="&lt;p&gt;You can find a similar question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12072/unable-to-add-printer/12073?noredirect=1#comment15362_12073&quot;&gt;here&lt;/a&gt;. Have a look at sugestion 4. In the approved answer.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-08-12T05:31:05.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12995" PostTypeId="2" ParentId="12984" CreationDate="2017-08-12T09:45:06.953" Score="1" Body="&lt;p&gt;Instead of &lt;code&gt;CUSTOM_VAPIS&lt;/code&gt; I had to use &lt;code&gt;--vapidir&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;vala_precompile(VALA_C ${EXEC_NAME}&#xA;    ...&#xA;PACKAGES&#xA;    ...&#xA;# CUSTOM_VAPIS&#xA;#     ../vapi/libgtop-2.0.vapi&#xA;OPTIONS&#xA;    --vapidir=${CMAKE_SOURCE_DIR}/vapi/&#xA;    ...&#xA;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7394" LastActivityDate="2017-08-12T09:45:06.953" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12997" PostTypeId="2" ParentId="7987" CreationDate="2017-08-12T13:23:41.323" Score="7" Body="&lt;p&gt;I know this is an old thread, but the approved answer is now incorrect and this is still the top Google link for this question, so in new versions of Elementary OS, the terminal is called &lt;code&gt;io.elementary.terminal&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5083" LastActivityDate="2017-08-12T13:23:41.323" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="12998" PostTypeId="2" ParentId="12781" CreationDate="2017-08-12T21:30:57.997" Score="1" Body="&lt;p&gt;To solve this issue:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to: your-usb-drive/boot/grub, &lt;/li&gt;&#xA;&lt;li&gt;Open &lt;code&gt;grub.cfg&lt;/code&gt; file to edit&lt;/li&gt;&#xA;&lt;li&gt;In each menuentry in line linux add before &lt;code&gt;quiet splash ---&lt;/code&gt; text &lt;code&gt;nomodeset&lt;/code&gt;, so line ending will be like: &lt;code&gt;nomodeset quiet splash ---&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Save and after on running from USB you will be ok with display &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I also have gtx 970 and this helped for me&lt;/p&gt;&#xA;" OwnerUserId="11812" LastActivityDate="2017-08-12T21:30:57.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="12999" PostTypeId="2" ParentId="12826" CreationDate="2017-08-13T06:40:48.307" Score="-1" Body="&lt;p&gt;I had the same issue.&#xA;It helped, when i went to the bios and turned off fast boot.&lt;/p&gt;&#xA;" OwnerUserId="11816" LastActivityDate="2017-08-13T06:40:48.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13001" PostTypeId="2" ParentId="12935" CreationDate="2017-08-13T08:44:19.477" Score="2" Body="&lt;p&gt;Alright, so, this is an Electon/Ghost bug and it's documented &lt;a href=&quot;https://github.com/TryGhost/Ghost-Desktop/issues/274&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some suggestions are  &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Running Ghost from the terminal using sudo, you can do this by issuing this command:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo /usr/lib/Ghost/Ghost&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Changing the permissions for a particular folder which seems to be the origin of the issue, to do this run&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod -R +rx /usr/lib/Ghost/resources/app&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The thing is, this didn't work for me. Running Ghost now without priveleges starts it but it comes to a halt after few seconds.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Another solution (a very hacky, dirty solution): &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you want to avoid having to run Ghost from the terminal, you could do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install gksu by running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;gksu is a graphical interface that will ask for your password when running a program with admin privileges.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, create a .desktop file in the folder .local/share/applications named ghost-desktop.desktop with the following content&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Terminal=false&#xA;Type=Application&#xA;Name=Ghost&#xA;Exec=gksu /usr/lib/Ghost/Ghost&#xA;Icon=Ghost&#xA;Comment=Desktop Client for Ghost&#xA;StartupWMClass=ghost-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x .local/share/application/ghost-desktop.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the Ghost icon should show up on slingshot and you will be able to run it by clicking it. (you can also pin it to the dock)&lt;a href=&quot;https://i.stack.imgur.com/VGmf2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VGmf2.png&quot; alt=&quot;Slingshot show new Ghost icon entry&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/P81Dk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/P81Dk.png&quot; alt=&quot;Password prompt from gksu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I you ask me, I would just save myself the effort and just use solution #1.&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-08-13T08:44:19.477" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13003" PostTypeId="2" ParentId="12345" CreationDate="2017-08-13T12:16:47.027" Score="0" Body="&lt;p&gt;I had exactly the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is in this post:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12099/no-internet-connection-within-appcenter&quot;&gt;&amp;#39;no&amp;#39; internet connection within appcenter&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit your /etc/network/interfaces and add the following: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;auto eno1&#xA;iface eno1 inet dhcp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(eno1 might be eth0 or something else, its your Ethernet adapter name)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then restart your network-manager:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And it should work&lt;/p&gt;&#xA;" OwnerUserId="3088" LastActivityDate="2017-08-13T12:16:47.027" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13006" PostTypeId="1" CreationDate="2017-08-13T15:16:47.490" Score="0" ViewCount="51" Body="&lt;p&gt;Dzień dobry&#xA;Mam lat 57, systemu Linux używam od jakiegoś czasu, zwykle jest to Ubuntu albo inna dystrybucja oparta na tym systemie.Ostatnio jednak zainstalowałem&#xA;E.OS i bardzo mi się spodobał ten system, w związku z tym moje pytanie:&#xA;Jak zainstalować kartę TV Leadtek WinFast TV2000 XP na ElementaryOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pozdrawiam&#xA;Jakami&lt;/p&gt;&#xA;" OwnerUserId="11820" LastActivityDate="2023-12-12T18:08:16.027" Title="WinFast TV2000 jak zainstalować w elementary" Tags="|hardware|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13007" PostTypeId="1" CreationDate="2017-08-13T23:54:47.660" Score="1" ViewCount="142" Body="&lt;p&gt;I implemented the procedure from this link -&gt; &lt;a href=&quot;http://bernaerts.dyndns.org/linux/74-ubuntu/220-ubuntu-resume-usb-hid&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://bernaerts.dyndns.org/linux/74-ubuntu/220-ubuntu-resume-usb-hid&lt;/a&gt; but would be awesome if this was &quot;out of the box&quot; from elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="11823" LastEditorUserId="308" LastEditDate="2018-08-07T16:58:17.597" LastActivityDate="2018-08-07T16:58:17.597" Title="elementary OS lacks wakeup from usb controls" Tags="|power|" AnswerCount="1" CommentCount="0" ClosedDate="2017-08-15T17:32:43.103" ContentLicense="CC BY-SA 4.0" />
  <row Id="13008" PostTypeId="1" CreationDate="2017-08-14T01:51:22.820" Score="0" ViewCount="443" Body="&lt;p&gt;I have elementary the freya 0.3.2, based on ubuntu 14.04, wanted to upgrade to 16.04.&#xA;I've tried to update but it gives me an error, which is as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An update from 'freya' to 'xenial' is not supported with this tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I appreciate your help solving the problem.&#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="11825" LastActivityDate="2017-08-14T11:47:07.693" Title="Ubuntu 14.04, wanted to upgrade to 16.04" Tags="|updates|ubuntu|" AnswerCount="1" CommentCount="1" ClosedDate="2017-08-15T17:33:04.180" ContentLicense="CC BY-SA 3.0" />
  <row Id="13009" PostTypeId="2" ParentId="13006" CreationDate="2017-08-14T01:55:18.663" Score="0" Body="&lt;p&gt;Since elementary OS is based on Ubuntu, you may find the process listed on the Ubuntu Forum helpful. &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=647129&quot; rel=&quot;nofollow noreferrer&quot;&gt;HOWTO: Winfast TV2000 XP Series card on Ubuntu&lt;/a&gt;. The steps are simple. First, you may need to uninstall the &lt;code&gt;tvtime&lt;/code&gt; package, not sure. Then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod bt878&#xA;sudo rmmod tuner&#xA;sudo rmmod bttv&#xA;sudo modprobe bttv card=34 tuner=43&#xA;sudo apt-get install tvtime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You might need to unmute a channel or two in &lt;code&gt;alsamixer&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user10202" LastActivityDate="2017-08-14T01:55:18.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13011" PostTypeId="2" ParentId="13007" CreationDate="2017-08-14T06:22:24.017" Score="0" Body="&lt;p&gt;If you mean wakeup from suspend, please check your BIOS power settings. &#xA;I'm running an Intel NUC and it does wakeup from suspend by hitting a key on the usb keyboard. ... &quot;Out of the box&quot; that is.&lt;/p&gt;&#xA;" OwnerUserId="4584" LastActivityDate="2017-08-14T06:22:24.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13012" PostTypeId="2" ParentId="13008" CreationDate="2017-08-14T11:47:07.693" Score="1" Body="&lt;p&gt;You can't upgrade from Freya to Loki. You have to perform a fresh install.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-08-14T11:47:07.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13013" PostTypeId="2" ParentId="12826" CreationDate="2017-08-14T13:35:36.120" Score="0" Body="&lt;p&gt;I didn't find a solution to the problem so I ended up reinstalling the OS altogether.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the problem came back after I installed AMDGPU-PRO drivers. This time I was able to boot into recovery and do an uninstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the first installation I had the drivers installed since day one, so I suspect they were compatible with that version of Loki, until I upgraded the system and the drivers became incompatible somehow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think I'll stick to the default drivers or use oibaf.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for all the comments.&lt;/p&gt;&#xA;" OwnerUserId="11648" LastActivityDate="2017-08-14T13:35:36.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13016" PostTypeId="1" CreationDate="2017-08-14T20:22:05.827" Score="1" ViewCount="47" Body="&lt;p&gt;I am using an Apple Magic Keyboard and would like to remap the keyboard shortcuts to be more apple like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Command + C for copy&#xA;Command + V for paste&lt;/p&gt;&#xA;&#xA;&lt;p&gt;etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the best way to accomplish this?&lt;/p&gt;&#xA;" OwnerUserId="11797" LastActivityDate="2017-08-14T20:22:05.827" Title="Re-map copy &amp; paste" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ClosedDate="2017-08-16T19:50:09.953" ContentLicense="CC BY-SA 3.0" />
  <row Id="13018" PostTypeId="1" CreationDate="2017-08-15T12:43:20.880" Score="0" ViewCount="1046" Body="&lt;p&gt;Can you install elementary OS on an SSD hard drive?&lt;/p&gt;&#xA;" OwnerUserId="11835" LastEditorUserId="84" LastEditDate="2018-05-06T17:54:34.220" LastActivityDate="2018-05-06T17:54:34.220" Title="Can you install elementary os on an ssd hard drive?" Tags="|system-installation|disk-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13024" PostTypeId="1" CreationDate="2017-08-15T18:14:16.500" Score="0" ViewCount="113" Body="&lt;p&gt;I am new to Linux so please ELI5. I have installed the Canon MF227DW Linux drivers off the manufacturer support page. The file I downloaded was this&#xA;&lt;code&gt;linux-UFRII-drv-v340-02-usen.tar.gz&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I unpacked it and now inside &lt;code&gt;linux-UFRII-drv-v340-02-usen&lt;/code&gt; there are the following folders and files inside. My system is 64 bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SXYdJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SXYdJ.png&quot; alt=&quot;http://imgur.com/a/tOCAG&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I go about installing the drivers? None of these are .PPD format&lt;/p&gt;&#xA;" OwnerUserId="11840" LastEditorUserId="578" LastEditDate="2017-08-15T20:11:15.493" LastActivityDate="2017-10-09T07:21:15.307" Title="MF227DW printer driver" Tags="|printer|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13025" PostTypeId="2" ParentId="13024" CreationDate="2017-08-15T20:10:52.987" Score="1" Body="&lt;p&gt;You can install these drivers via the command line by installing the debian packages you see in the folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Issue the following command line in a terminal window (right-click on the &lt;em&gt;Files&lt;/em&gt; window and select &lt;em&gt;Open in/Terminal&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --install *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-08-15T20:10:52.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13026" PostTypeId="2" ParentId="13018" CreationDate="2017-08-15T21:55:05.347" Score="2" Body="&lt;p&gt;You definitely can.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I actually cloned my full HD to a new SSD yesterday, &#xA;and it rebooted just fine and speedying everything...&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2017-08-15T21:55:05.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13028" PostTypeId="2" ParentId="12706" CreationDate="2017-08-16T11:45:07.340" Score="0" Body="&lt;p&gt;This is the main reason of your issue: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13023/config-file-var-lib-lightdm-config-monitors-xml-is-just-ignored&quot;&gt;Config file /var/lib/lightdm/.config/monitors.xml is just ignored&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon Greeter and whole elementary lightdm implementation are buggy. Every other things work very well and design of the whole system interface is the best I have ever seen on Linux. But this bug makes my job as a programmer very annoying. For now I would recommend you to get symbol of the monitor you want to be the main by command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that edit xorg.conf:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/X11/xorg.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and paste this peace of text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Monitor&quot;&#xA;  Identifier  &quot;HDMI-1&quot;&#xA;  Option      &quot;Primary&quot; &quot;true&quot;&#xA;  Option      &quot;PreferredMode&quot;  &quot;1920x1080&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;PrefferedMode is the resolution of the monitor you chose as the main. It will place Pantheon Greeter on all monitors you have attached to your MacBook in mirror mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is very awful workaround that doesn't deserve to exist in 21 century but as I know the only one.&lt;/p&gt;&#xA;" OwnerUserId="11814" LastActivityDate="2017-08-16T11:45:07.340" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13029" PostTypeId="2" ParentId="8192" CreationDate="2017-08-16T13:28:00.727" Score="0" Body="&lt;p&gt;Another issue on appCenter may be related to warning/error messages that generates freezing loops.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;on console, use &lt;code&gt;sudo apt update&lt;/code&gt; and check for any warning messages:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FhsAZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FhsAZ.png&quot; alt=&quot;apt update warning message&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I solved that problem removing the address package from the package list on &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2017-08-16T13:28:00.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13030" PostTypeId="2" ParentId="12985" CreationDate="2017-08-16T15:00:21.110" Score="0" Body="&lt;p&gt;I am a relative noob to the entire Linux experience, pretty much diving in head first, watching TONS of tutorials and reading volumes of reviews and forum entries. i am a born distro-hopper i suppose. My point being, that i have tried many different beginner level distros, and my honest opinion is that Elelmentary OS is by far the most user friendly.  I continue to come back to it every time because it is so straight-forward, and when problems are encountered, the solution usually is achieved with minimal effort. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Great support forums and a friendly community as well.  &lt;em&gt;Hope you enjoy the discovery process as much as i have!&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="11847" LastActivityDate="2017-08-16T15:00:21.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13032" PostTypeId="1" CreationDate="2017-08-16T20:03:23.653" Score="0" ViewCount="49" Body="&lt;p&gt;I have a System76 Galago Pro. Upon booting the laptop and logging in, the laptop hangs on a screen showing only the desktop wallpaper for about 2 minutes before loading the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing to note is that I do have home folder encryption enabled, in case that might be the issue, but it really shouldn't because the laptop have an nvme ssd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure how to go about troubleshooting this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought it could be a duplicate of this issue, but the issue seems to describe the laptop never finishing booting, which mine does:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/571/nothing-but-wallpaper-shows-up-after-login&quot;&gt;Nothing but wallpaper shows up after login&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11797" LastActivityDate="2018-02-14T04:14:03.687" Title="Laptop hangs for approximately 2 minutes upon sign-in" Tags="|release-loki|hardware|" AnswerCount="1" CommentCount="0" ClosedDate="2018-03-11T02:01:23.623" ContentLicense="CC BY-SA 3.0" />
  <row Id="13034" PostTypeId="2" ParentId="10310" CreationDate="2017-08-16T20:48:44.557" Score="0" Body="&lt;p&gt;I understand it's a bit late maybe with this kind of reply. But I think it can still be useful for someone. If I understand the original question right, by Cipricus, he wanted to change the size of a running terminal. Not open a 2th terminal from terminal 1 and change the size of the 2th terminal window afterwards. The big issue, a running bash script will stop the script after opening the 2th terminal window, which is not what a bash developer wants.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have frustrated myself today while trying to use your replies for this question in combination with a large bash script. Doesn't work. And even if you try to make it work you probably don't want to open a second terminal while running a bash script. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most important, before I will show you my trick, a short message; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dear gentlemen elementary developers, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please don't let us find endless workarounds for functions that anyone would expect to be available to work when needed. Changing a terminal window size should be a matter of one terminal command that is supplied by default after installing the o.s. on a computer.&#xA;Please provide this for other people like me, not wanting to install another terminal application and keep elementary os as original as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ok. Having said that, here is what I found. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In your bash script use these lines to change the size of your terminal while running a script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PKG_OK=$(dpkg-query -W --showformat='${Status}\n' wmctrl|grep &quot;install ok installed&quot;)&#xA;echo Checking for wmctrl: $PKG_OK&#xA;if [ &quot;&quot; == &quot;$PKG_OK&quot; ]; then&#xA;clear   &#xA;echo &quot;Please Wait a moment.....&quot;&#xA;sudo apt-get install --yes wmctrl &amp;gt; /dev/null 2&amp;gt;&amp;amp;1;&#xA;fi&#xA;wmctrl -r script.sh -e 0,-1,-1,1400,800;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the last line you need to change the name of the script (script.sh) to the filename of your running bash script and adjust the size values &quot;1400,800&quot; to your wish. That should be enough to use it.&#xA;It will probably work after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it does:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PKG_OK=$(dpkg-query -W --showformat='${Status}\n' wmctrl|grep &quot;install ok installed&quot;)&#xA;echo Checking for wmctrl: $PKG_OK&#xA;if [ &quot;&quot; == &quot;$PKG_OK&quot; ]; then&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In this part the script is checking for a package named &quot;wmctrl&quot; whether it is installed or not.&#xA;then,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;clear &#xA;echo &quot;Please Wait a moment.....&quot;&#xA;sudo apt-get install --yes wmctrl &amp;gt; /dev/null 2&amp;gt;&amp;amp;1;&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it doesn't find the package installed, it will install the package,&#xA;but it will not confuse the user with terminal output of the installation&#xA;process. This hiding is done by: &lt;code&gt;&amp;gt; /dev/null 2&amp;gt;&amp;amp;1;&lt;/code&gt;&#xA;The user will only see an empty screen with a message &quot;Please wait a moment&quot; while waiting 10 seconds for the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is no installation needed, the better. The script will end the boolean with fi and go to the last line;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -r script.sh -e 0,-1,-1,1400,800;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where it will actually use the command to adjust the terminal window.&#xA;It is handy to do a &lt;code&gt;#wmctrl -l&lt;/code&gt; to examine the names of the windows in the list. Probably you will see the name of your running sh script in the list.&#xA;Only the &quot;exact&quot; name of your script should be enough for wmctrl to find the right window. (Because that is what is does, it finds the right window among the list of all open windows and change it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last numbers are the ones to adjust the window settings. In my example I only wanted to change the &lt;strong&gt;size&lt;/strong&gt; of the running terminal window (last 2 values, 1400 and 800) and not the position (value 2 and 3 in the line) -1 -1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For all options take a look at : &lt;code&gt;wmctrl -h&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pfew...! And all that to avoid one missing logical terminal command...&#xA;Works for me, hope you can use it!&lt;/p&gt;&#xA;" OwnerUserId="7603" LastActivityDate="2017-08-16T20:48:44.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13040" PostTypeId="1" AcceptedAnswerId="13050" CreationDate="2017-08-17T12:58:52.597" Score="0" ViewCount="292" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wUOxe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wUOxe.png&quot; alt=&quot;Only button with label has linked style&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only button with label has linked style.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var button_box = new Gtk.Box (Gtk.Orientation.HORIZONTAL, 0);&#xA;button_box.get_style_context ().add_class (Gtk.STYLE_CLASS_LINKED);&#xA;&#xA;info_button = new Gtk.Button.from_icon_name (&quot;dialog-information-symbolic&quot;, Gtk.IconSize.LARGE_TOOLBAR);&#xA;button_box.add (info_button);&#xA;&#xA;button_with_label = new Gtk.Button.with_label (_(&quot;Test&quot;));&#xA;button_box.add (button_with_label);&#xA;&#xA;header_bar.pack_start (button_box);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7394" LastEditorUserId="7394" LastEditDate="2017-08-17T13:07:08.210" LastActivityDate="2017-08-18T22:40:57.223" Title="Linked style doesn't work for buttons" Tags="|gtk|vala|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13041" PostTypeId="2" ParentId="13032" CreationDate="2017-08-17T23:25:45.603" Score="0" Body="&lt;p&gt;I think you are running into a known issue, that many of us encountered already. Please run this command from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;let me know if it helps&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-08-17T23:25:45.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13047" PostTypeId="1" CreationDate="2017-08-18T15:56:48.017" Score="0" ViewCount="522" Body="&lt;p&gt;I cannot update any app. &#xA;I click update all or the update for the individual app.. it asks me for authentication and then says waiting for package manager lock and then nothing happens and update cancels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also how do i make bluetooth stop switching on automatically every time i switch on PC?&lt;/p&gt;&#xA;" OwnerUserId="11868" LastActivityDate="2020-08-13T17:50:02.157" Title="Cannot update any app" Tags="|updates|appcenter|bluetooth|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13048" PostTypeId="1" AcceptedAnswerId="13049" CreationDate="2017-08-18T17:36:25.023" Score="0" ViewCount="168" Body="&lt;p&gt;Is Flash installed by default? If so I'd like to uninstall flash. Thanks for the help.&lt;/p&gt;&#xA;" OwnerUserId="11869" LastActivityDate="2017-08-18T20:56:39.350" Title="Is Flash installed by default?" Tags="|system-installation|software-installation|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13049" PostTypeId="2" ParentId="13048" CreationDate="2017-08-18T20:56:39.350" Score="0" Body="&lt;p&gt;No, it's not installed by default. You can check if it's installed by entering in the address bar of your browsers &lt;code&gt;about:plugins&lt;/code&gt; or here &lt;a href=&quot;https://helpx.adobe.com/flash-player.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://helpx.adobe.com/flash-player.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-08-18T20:56:39.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13050" PostTypeId="2" ParentId="13040" CreationDate="2017-08-18T22:40:57.223" Score="1" Body="&lt;p&gt;The &lt;code&gt;Gtk.HeaderBar&lt;/code&gt; provides special styling for &lt;code&gt;Gtk.Button&lt;/code&gt;'s so that they look good inside it.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;The solution:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;In your case the solution is easy: remove the &lt;code&gt;image-button&lt;/code&gt; style class from the &lt;code&gt;info_button&lt;/code&gt;:&#xA;&lt;code&gt;info_button.get_style_context ().remove_class (&quot;image-button&quot;);&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have any problems with Gtk styling further on, I recommend to enable Gtk Inspector (read more here: &lt;a href=&quot;https://wiki.gnome.org/Projects/GTK+/Inspector&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Projects/GTK+/Inspector&lt;/a&gt;) which will provide you with great tools to enable / disable Gtk properties and such.&lt;/p&gt;&#xA;" OwnerUserId="553" LastActivityDate="2017-08-18T22:40:57.223" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13051" PostTypeId="2" ParentId="560" CreationDate="2017-08-19T07:15:25.663" Score="3" Body="&lt;p&gt;Or as it says &lt;a href=&quot;https://itsfoss.com/add-program-dock-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the app, then rt-click on app in dock, and select 'Keep in dock'.&lt;/p&gt;&#xA;" OwnerUserId="8120" LastActivityDate="2017-08-19T07:15:25.663" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13052" PostTypeId="1" AcceptedAnswerId="13595" CreationDate="2017-08-19T09:27:27.463" Score="2" ViewCount="522" Body="&lt;p&gt;I changed the Super+Space shortcut to Super using some command I don't remember now (It's been 2-3 weeks). But I don't like it, it gets in the way many times during my work, and also Super+Space never got removed, Super simply gained the shortcut and it now exists for both shortcuts. So, I want to go back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I remove the Super shortcut for the application menu?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastEditorUserId="5831" LastEditDate="2017-08-19T09:56:02.263" LastActivityDate="2017-10-16T13:59:12.523" Title="How to revert Super to Super + Space?" Tags="|release-loki|menu|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13053" PostTypeId="2" ParentId="10048" CreationDate="2017-08-19T11:41:43.457" Score="9" Body="&lt;p&gt;For Gmail:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to Go to &lt;a href=&quot;https://myaccount.google.com/security&quot; rel=&quot;noreferrer&quot;&gt;https://myaccount.google.com/security&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click App passwords: &lt;a href=&quot;https://i.stack.imgur.com/ULOFx.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ULOFx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Generate it and copy&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;In calendar app enter google email and generated password.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3449" LastActivityDate="2017-08-19T11:41:43.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13056" PostTypeId="1" CreationDate="2017-08-20T01:57:54.350" Score="3" ViewCount="634" Body="&lt;p&gt;Is there any way to change the volume increment or ticks? With the default settings, the ticks are way too broad for my taste - one &quot;tick&quot; changes the volume by a large amount, I'd prefer finer control with each tick only increasing the volume by 1-2%. I found in Ubuntu 16.04 documentation for setting in dconf '/org/gnome/settings-daemon/plugins/sound/volume-step' but that doesn't seem to change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Worse case scenario, I can create a custom mapping to change the volume using amixer, but I'd prefer to have the slick UI volume bubble pop-up. Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="11878" LastActivityDate="2018-12-26T11:00:50.167" Title="Change volume control increments/ticks?" Tags="|settings|sound|indicator-sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13058" PostTypeId="1" CreationDate="2017-08-20T06:43:04.073" Score="2" ViewCount="341" Body="&lt;p&gt;Is there any way I can replace the slingshot launcher? I have an old netbook with little screen &quot;real estate&quot; something like the GNOME 2 style menu would be better.&lt;/p&gt;&#xA;" OwnerUserId="11803" LastActivityDate="2019-04-23T10:46:25.673" Title="Replacing Slingshot" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13060" PostTypeId="1" AcceptedAnswerId="13062" CreationDate="2017-08-20T08:30:52.140" Score="9" ViewCount="15503" Body="&lt;p&gt;Whenever I do &lt;code&gt;sudo apt update&lt;/code&gt;, I get the following response:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Ign:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki InRelease&#xA;Hit:2 http://in.archive.ubuntu.com/ubuntu xenial InRelease                                                                                      &#xA;Get:3 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]                                                                                               &#xA;Ign:4 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki InRelease                                                                                            &#xA;Get:5 http://in.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]                                                &#xA;Ign:6 http://http.kali.org/kali loki InRelease                                                                                       &#xA;Ign:7 http://security.kali.org/kali-security loki InRelease                                                                          &#xA;Err:8 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release                                         &#xA;  404  Not Found&#xA;Err:9 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release                                     &#xA;  404  Not Found&#xA;Err:10 http://http.kali.org/kali loki Release                                                                   &#xA;  404  Not Found&#xA;Err:11 http://security.kali.org/kali-security loki Release                                              &#xA;  404  Not Found&#xA;Get:12 http://in.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]    &#xA;Reading package lists... Done      &#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://http.kali.org/kali loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://security.kali.org/kali-security loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm able to do &lt;code&gt;sudo apt upgrade&lt;/code&gt; and everything seems to work fine but this bugs me a lot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found similar questions in the forum but nothing with this exact issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought this &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7830/11882&quot;&gt;answer&lt;/a&gt; would solve the issue for me but there are no &lt;code&gt;ubuntu/dists/loki&lt;/code&gt; in my &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; to replace with &lt;code&gt;ubuntu/dists/xenial&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can this be resolved?&lt;/p&gt;&#xA;" OwnerUserId="11882" LastEditorDisplayName="user170" LastEditDate="2018-04-05T15:38:25.520" LastActivityDate="2020-03-10T22:38:52.437" Title="Error while doing 'sudo apt update': no Release file" Tags="|release-loki|apt|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13062" PostTypeId="2" ParentId="13060" CreationDate="2017-08-20T18:04:32.543" Score="6" Body="&lt;p&gt;Right click on the Files icon in Plank dock, select &lt;em&gt;New Window As Administrator&lt;/em&gt;, go to &lt;em&gt;/etc/apt/sources.list.d/&lt;/em&gt; folder and edit the various files there related to each of the errors by changing references from &lt;em&gt;loki&lt;/em&gt; release to &lt;em&gt;xenial&lt;/em&gt; release. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise,  delete the kali repository file, because there isn't a &lt;em&gt;loki&lt;/em&gt; or &lt;em&gt;xenial&lt;/em&gt; release for it. Kali is a Debian based distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then try again with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update in relation with similar occurrences:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might be related to more than just &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1629646&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; bug. I have seen a similar error in third party ppa-s where instead of &quot;xenial&quot; was written &quot;bionic&quot; resulting in a similar error with ha similar fix.&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorDisplayName="user170" LastEditDate="2018-04-05T16:41:53.203" LastActivityDate="2018-04-05T16:41:53.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13064" PostTypeId="2" ParentId="13052" CreationDate="2017-08-20T18:38:34.870" Score="1" Body="&lt;p&gt;To open application search only by pressing Super(win) key:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gsettings set org.gnome.mutter overlay-key &quot;'Super_L'&quot;&#xA;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'wingpanel --toggle-indicator=app-launcher'&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you should reverse engineer these commands. Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="11874" LastActivityDate="2017-08-20T18:38:34.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13065" PostTypeId="2" ParentId="12966" CreationDate="2017-08-20T18:44:45.947" Score="-1" Body="&lt;p&gt;You can tweak the text size in System Settings -&gt; Universal Access -&gt; Display -&gt; Reading. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/esHR1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/esHR1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11874" LastActivityDate="2017-08-20T18:44:45.947" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13066" PostTypeId="1" CreationDate="2017-08-20T18:44:48.763" Score="1" ViewCount="267" Body="&lt;p&gt;I am trying to install Elementary Loki through USB. Unfortunately when every i try to install. The Installation stuck at &lt;strong&gt;Start the installation&lt;/strong&gt;.&#xA;Please Help me&lt;/p&gt;&#xA;" OwnerUserId="11889" LastActivityDate="2017-08-20T18:44:48.763" Title="elementary loki installation stuck at Start the installation" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ClosedDate="2017-11-11T19:31:17.587" ContentLicense="CC BY-SA 3.0" />
  <row Id="13067" PostTypeId="2" ParentId="12931" CreationDate="2017-08-20T18:47:13.237" Score="-1" Body="&lt;p&gt;Try disabling dynamic workspaces:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11874" LastEditorUserId="578" LastEditDate="2017-08-23T19:14:43.327" LastActivityDate="2017-08-23T19:14:43.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13068" PostTypeId="1" CreationDate="2017-08-20T21:28:48.800" Score="0" ViewCount="298" Body="&lt;p&gt;I just installed elementary OS on my notebook and it's started randomly freeze. There was 50% of RAM available when it freezed. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;HP ProBook 650 G1&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user11890" LastEditorUserId="308" LastEditDate="2018-08-07T16:41:09.947" LastActivityDate="2023-12-13T11:02:45.340" Title="elementary OS freezes randomly" Tags="|programming|shell|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13069" PostTypeId="2" ParentId="13052" CreationDate="2017-08-21T09:37:30.670" Score="2" Body="&lt;p&gt;Probably you did use the command gXg pointed out. To revert changes, do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.wm.keybindings panel-main-menu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-08-21T09:37:30.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13071" PostTypeId="2" ParentId="13068" CreationDate="2017-08-21T19:49:31.937" Score="0" Body="&lt;p&gt;if you are using Nvidia card&#xA;see which version you are using. &#xA;Install additional drivers &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install additional-drivers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the package name might be different but you can also find it in the app store&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after it was installed check there which drivers you are using for your graphics card. &#xA;I had such problems with nouveau drivers (open source drivers for Nvidia) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;so I installed the latest drivers from Nvidia and everything was resolved&lt;/p&gt;&#xA;" OwnerUserId="8520" LastActivityDate="2017-08-21T19:49:31.937" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13073" PostTypeId="1" CreationDate="2017-08-22T09:11:28.027" Score="0" ViewCount="489" Body="&lt;p&gt;After &lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt;&#xA;my &lt;code&gt;cat /etc/issue&lt;/code&gt; looks like &lt;code&gt;Ubuntu 14.04.5 LTS \n \l&lt;/code&gt;&#xA;and furthermore &lt;code&gt;apt-cache policy&lt;/code&gt; tells me &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ apt-cache policy&#xA;Paketdateien:&#xA; 100 /var/lib/dpkg/status&#xA;     release a=now&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/universe Translation-en&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/restricted Translation-en&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/multiverse Translation-en&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/main Translation-en&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/multiverse i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-security,n=trusty,l=Ubuntu,c=multiverse&#xA;     origin security.ubuntu.com&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/universe i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-security,n=trusty,l=Ubuntu,c=universe&#xA;     origin security.ubuntu.com&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/restricted i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-security,n=trusty,l=Ubuntu,c=restricted&#xA;     origin security.ubuntu.com&#xA; 500 http://security.ubuntu.com/ubuntu/ trusty-security/main i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-security,n=trusty,l=Ubuntu,c=main&#xA;     origin security.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/universe Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/restricted Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/multiverse Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/main Translation-en&#xA; 100 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/multiverse i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-backports,n=trusty,l=Ubuntu,c=multiverse&#xA;     origin de.archive.ubuntu.com&#xA; 100 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/universe i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-backports,n=trusty,l=Ubuntu,c=universe&#xA;     origin de.archive.ubuntu.com&#xA; 100 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/restricted i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-backports,n=trusty,l=Ubuntu,c=restricted&#xA;     origin de.archive.ubuntu.com&#xA; 100 http://de.archive.ubuntu.com/ubuntu/ trusty-backports/main i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-backports,n=trusty,l=Ubuntu,c=main&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/universe Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/restricted Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/multiverse Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/main Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/multiverse i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-updates,n=trusty,l=Ubuntu,c=multiverse&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/universe i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-updates,n=trusty,l=Ubuntu,c=universe&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/restricted i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-updates,n=trusty,l=Ubuntu,c=restricted&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty-updates/main i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty-updates,n=trusty,l=Ubuntu,c=main&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/universe Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/universe Translation-de&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/restricted Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/restricted Translation-de&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/multiverse Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/multiverse Translation-de&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/main Translation-en&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/main Translation-de&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/multiverse i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty,n=trusty,l=Ubuntu,c=multiverse&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/universe i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty,n=trusty,l=Ubuntu,c=universe&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/restricted i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty,n=trusty,l=Ubuntu,c=restricted&#xA;     origin de.archive.ubuntu.com&#xA; 500 http://de.archive.ubuntu.com/ubuntu/ trusty/main i386 Packages&#xA;     release v=14.04,o=Ubuntu,a=trusty,n=trusty,l=Ubuntu,c=main&#xA;     origin de.archive.ubuntu.com&#xA;Mit Pinning verwaltete Pakete:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which means the source lists of elementary os got substituted on distro-upgrade...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can i get the sourcelist of elementary os back?&lt;/p&gt;&#xA;" OwnerUserId="11899" LastActivityDate="2019-05-03T08:02:55.530" Title="Elementary OS Source List removed and substituted by Ubuntu 14.04 Source-list" Tags="|sources|" AnswerCount="1" CommentCount="1" ClosedDate="2019-05-03T20:08:25.887" ContentLicense="CC BY-SA 3.0" />
  <row Id="13074" PostTypeId="1" CreationDate="2017-08-22T09:23:35.270" Score="0" ViewCount="235" Body="&lt;p&gt;I generally open multiple terminal window using ctrl+shift+t.&#xA;But since all tabs has same color, its very difficult to recognize which is the active tab.&#xA;Is ther a way to change color of active tab??&lt;/p&gt;&#xA;" OwnerUserId="7003" LastActivityDate="2024-03-21T17:07:10.823" Title="Highlight active tab in elementary terminal window" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13076" PostTypeId="1" CreationDate="2017-08-22T15:15:33.480" Score="0" ViewCount="232" Body="&lt;p&gt;Previously I had tried to install redshift to provide a reddish colour to the screen during the night, but when I tried to uninstall it using purge, it was not removed and so my screen is still red. Is there any way to remove the reddish colour of screen?&lt;/p&gt;&#xA;" OwnerUserId="11841" LastEditorUserId="84" LastEditDate="2018-05-06T18:43:28.070" LastActivityDate="2018-05-06T18:43:28.070" Title="My laptop screen has gone red even after I installed redshift and it's not going away" Tags="|display|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13077" PostTypeId="1" CreationDate="2017-08-22T15:35:24.527" Score="1" ViewCount="814" Body="&lt;p&gt;I'm using elementary OS 0.4.1 Loki 64 bit on my laptop. Now I can't hear sounds of my audio or any video file through my headset. Even though I plug them the sound will come out of the inbuilt speaker and interestingly the mic in the headset start working and will be ready to take the input. The change for output device on settings for sounds also shows nothing other than the built in audio device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any suggestions which would help me to use my headset normally while plugging into the laptop?&lt;/p&gt;&#xA;" OwnerUserId="11880" LastEditorUserId="84" LastEditDate="2018-05-06T18:42:19.420" LastActivityDate="2019-01-03T09:02:10.493" Title="Problem with audio while using headset" Tags="|release-loki|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13078" PostTypeId="2" ParentId="13076" CreationDate="2017-08-22T15:56:23.470" Score="3" Body="&lt;p&gt;Even though you've removed Redshift, it seems it has &quot;permanently&quot; altered your display settings. Try running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --gamma 0.9:0.9:0.9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;eDP-1 is the name of my monitor, yours may vary&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-08-22T15:56:23.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13079" PostTypeId="1" CreationDate="2017-08-22T17:36:22.860" Score="1" ViewCount="414" Body="&lt;p&gt;the title pretty much says it all, I'd like to know the safest alternative to etcher for this installation process on Snow Leopard. Elementary os guide says one should use etcher but etcher needs os x 10.9 or newer.&#xA;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="11903" LastActivityDate="2017-08-22T17:36:22.860" Title="installing elementaryOS on Snow Leopard: best alternative for Etcher" Tags="|system-installation|macbook|usb-drive|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13080" PostTypeId="2" ParentId="10062" CreationDate="2017-08-23T00:16:09.417" Score="0" Body="&lt;p&gt;First, you should removed everything related with nvidia&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove bumblebee (if installed)&#xA;sudo apt-get remove nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And add the ppa&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;List the drivers and install them&#xA;you should turn the secure boot in BIOS&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers list&#xA;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you will see the &quot;PRIME Profiles&quot; section in nvidia-settings screen. you can select Intel or nvidia.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reboot or log out and login in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want a software to manage your GPU,then installing primus with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install primus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With primus, bumblebee is also installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, edit /etc/bumblebee/bumblebee.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;driver=nvidia&#xA;KernelDriver=nvidia-367&#xA;LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-367&#xA;XorgModulePath=/usr/lib/nvidia-367/xorg,/usr/lib/xorg/modules&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;NOTE: nvidia-367 is your version, you should change the numbers for your nvidia driver version&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="8311" LastEditorUserId="578" LastEditDate="2017-08-23T19:17:09.293" LastActivityDate="2017-08-23T19:17:09.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13082" PostTypeId="1" CreationDate="2017-08-23T02:38:21.583" Score="1" ViewCount="1710" Body="&lt;p&gt;I have a Lenovo Thinkpad T430, and I just installed Elementary OS a week ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I've been trying it with no charger I've seen how my battery level is reducing almost every three minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really have no idea of what to do.&lt;/p&gt;&#xA;" OwnerUserId="11909" LastActivityDate="2017-08-27T17:57:27.007" Title="Elementary OS is draining my battery" Tags="|release-loki|battery|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13085" PostTypeId="1" CreationDate="2017-08-23T11:21:07.877" Score="2" ViewCount="691" Body="&lt;p&gt;I'm trying to compile my own kernel using this guide &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel&lt;/a&gt;&#xA;but when I'm issuing the first command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get source linux-image-$(uname -r) &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;apt is informing me that it was not possible to find the source for packet linux, &lt;code&gt;uname -r&lt;/code&gt; shows that the current kernel is linux-image-4.4.0-92-generic. The same thing happens when I'm issuing this command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get build-dep linux-image-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What should I do to be able to compile my own version of the kernel? Is the ubuntu kernel compilation guide inappropriate for elementary os?&lt;/p&gt;&#xA;" OwnerUserId="11915" LastEditorUserId="578" LastEditDate="2017-08-23T19:15:59.447" LastActivityDate="2018-09-04T14:01:02.323" Title="Compiling my own kernel" Tags="|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13086" PostTypeId="2" ParentId="13082" CreationDate="2017-08-23T11:32:52.227" Score="3" Body="&lt;p&gt;Linux in general doesn't have so well implemented battery saving techniques as windows out of the box but that doesn't mean you cannot try to improve things. Take a look at this article which gives some pointers how to maximize your laptop battery &lt;a href=&quot;https://www.howtogeek.com/55185/how-to-maximize-the-battery-life-on-your-linux-laptop/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/55185/how-to-maximize-the-battery-life-on-your-linux-laptop/&lt;/a&gt; in my case (I have Lenovo Thinkpad X230) installing tlp helped the most so I recommend you to make youself familiar with &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://linrunner.de/en/tlp/docs/tlp-linux-advanced-power-management.html&lt;/a&gt; there are specific tlp modules created especially for Thinkpads (tp-smapi-dkms and acpi-call-dkms). I hope this helps :-)&lt;/p&gt;&#xA;" OwnerUserId="11915" LastActivityDate="2017-08-23T11:32:52.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13087" PostTypeId="1" CreationDate="2017-08-23T16:23:03.963" Score="0" ViewCount="483" Body="&lt;p&gt;I'm using Loki (though this might apply to all versions). I have a laptop whose screen is my primary monitor. Additionally, I have two external monitors, one to the left and one to the right of my laptop screen. This is how they're virtually positioned in my Displays settings, too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The middle monitor is starred as my primary. However, almost all windows open in the left monitor anyway and have to be dragged over to my main monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens when new applications open, when existing applications open new windows, and even for things such as the login screen (though I think that might be a separate bug, the cause may still be related).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there some way I can force the default monitor for things to happen to be my main screen, rather than the first screen?&lt;/p&gt;&#xA;" OwnerUserId="7171" LastActivityDate="2024-03-21T20:03:40.490" Title="How to force windows to open on the primary monitor instead of the first monitor?" Tags="|gala|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13088" PostTypeId="1" CreationDate="2017-08-23T16:50:48.720" Score="1" ViewCount="1151" Body="&lt;p&gt;I am planning to buy asus zenbook flip ux360. I will be running Linux on it and would really appreciate if anyone can share their experience of running elementary OS on it. &#xA;Here is the link to the laptop: &lt;a href=&quot;http://rads.stackoverflow.com/amzn/click/B01HZT6AR0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.amazon.com/ZenBook-UX360CA-UBM1T-13-3-inch-Touchscreen-Convertible/dp/B01HZT6AR0&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please let me know if this question doesn't belong here and I will delete it.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="11731" LastActivityDate="2019-04-18T11:42:32.463" Title="Installing elementary OS in asus zenbook flip ux360" Tags="|system-installation|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13091" PostTypeId="2" ParentId="13077" CreationDate="2017-08-24T06:50:29.217" Score="1" Body="&lt;p&gt;I had the same issue on my imac 2008 with elementary, try updating first and restart since i believe there was a bug regarding the same:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get dist-upgrade &#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;once it boots back check with earphone rather than hi res audio headphones like in my case audio-technica m50x didn't work although cheap earphones did.&lt;/p&gt;&#xA;" OwnerUserId="11922" LastActivityDate="2017-08-24T06:50:29.217" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13094" PostTypeId="1" CreationDate="2017-08-24T11:58:45.980" Score="0" ViewCount="238" Body="&lt;p&gt;I installed my ElementaryOS with Rufus 2.16 on my USB, and tried to launch it. But then appeared this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lbmhl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lbmhl.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using every option from F6 menu, and still not working.&#xA;My PC: &#xA; 1. i5-3470;&#xA; 2. EVGA GTX970 SC;&#xA; 3. GoodRam DDR3 8GB 1333MHz;&#xA; 4. Gigabyte Z77-D3H;&lt;/p&gt;&#xA;" OwnerUserId="11924" LastActivityDate="2024-03-21T14:08:51.120" Title="Error while booting v0.4.1-stable - nouveau, nomodeset not working" Tags="|boot|system|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13095" PostTypeId="2" ParentId="13094" CreationDate="2017-08-24T14:35:48.590" Score="0" Body="&lt;p&gt;Did you check for the hash sum of the iso file after you downloaded it?&lt;br&gt;&#xA;In Windows do: &lt;code&gt;CertUtil -hashfile &amp;lt;PATH_TO_THE_ISO_FILE&amp;gt; SHA256&lt;/code&gt;&lt;br&gt;&#xA;In Linux do: &lt;code&gt;sha256sum elementaryos-xxxxxxxxxx.iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should match this string:&lt;br&gt;&#xA;&lt;code&gt;1d85b675bbbfc868d2286718cdc62590e41e1b40bfffcef7ac4111b7ea7da905&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="11923" LastActivityDate="2017-08-24T14:35:48.590" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13096" PostTypeId="2" ParentId="13087" CreationDate="2017-08-24T14:42:06.517" Score="0" Body="&lt;p&gt;I think you should close those apps on the monitor you want them to open.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;About the login screen. Yes that seems like a separate bug, it should show on all displays the same until you login. At least it does so for me on every linux distro.&lt;/p&gt;&#xA;" OwnerUserId="11923" LastActivityDate="2017-08-24T14:42:06.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13097" PostTypeId="2" ParentId="13074" CreationDate="2017-08-24T14:47:20.533" Score="0" Body="&lt;p&gt;Isn't there a white underline on the active tab?    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regardless you should probably install a different terminal emulator if you want more customizing ability. You can use Terminator.&lt;/p&gt;&#xA;" OwnerUserId="11923" LastActivityDate="2017-08-24T14:47:20.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13099" PostTypeId="1" CreationDate="2017-08-24T15:30:01.870" Score="1" ViewCount="59" Body="&lt;p&gt;I installed gThumb via apt (v 3:3.4.3-1). Unfortunately it doesn't show preview images of raw photos (Panasonic's *.rw2). The raws contain definitively a preview since geeqie displays them as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I activate the raw preview? Do I need to compile gThumb by myself (I tried but failed because &lt;code&gt;No package 'gsettings-desktop-schemas' found&lt;/code&gt; although installed.)?&lt;/p&gt;&#xA;" OwnerUserId="5274" LastActivityDate="2017-08-24T15:30:01.870" Title="gThumb raw preview" Tags="|software-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13101" PostTypeId="2" ParentId="11635" CreationDate="2017-08-24T20:10:33.133" Score="-1" Body="&lt;p&gt;Leap A-100; Lubuntu installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First download an alternate image of Lubun, it doesnt use ubiquity thing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, install it with rufus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Forgive my lousy english ;)&lt;/p&gt;&#xA;" OwnerUserId="11925" LastActivityDate="2017-08-24T20:10:33.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13103" PostTypeId="1" AcceptedAnswerId="13104" CreationDate="2017-08-24T23:10:32.100" Score="0" ViewCount="1012" Body="&lt;p&gt;So, I am used to disabling my touchpad send-events on external mouse via gsettings, and even when trying with dconf-editor, it no longer works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thus I am stuck disabling the touchpad with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;synclient TouchPadOff=1 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And honestly, it's a huge bother.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else?&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2017-08-25T16:33:40.377" Title="Gsettings and dconf-editor touchpad settings not being used" Tags="|touchpad|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13104" PostTypeId="2" ParentId="13103" CreationDate="2017-08-25T00:23:20.737" Score="1" Body="&lt;p&gt;It sounds like your touchpad has switched to using the synaptics driver instead of the libinput driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try removing the &lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt; package if it is installed. The libinput driver will already be installed, so it should be a case of removing this package and then rebooting for the libinput driver to be picked up.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2017-08-25T16:33:40.377" LastActivityDate="2017-08-25T16:33:40.377" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13108" PostTypeId="1" CreationDate="2017-08-25T21:22:43.033" Score="0" ViewCount="953" Body="&lt;p&gt;I wanted to install elementary OS Loki in dual boot with my win10. For information, I have a old motherboard mode with &lt;strong&gt;legacy bios&lt;/strong&gt;, I hope is not a problem to install elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used Rufus and followed the tutorial (just in case I missed something), after selecting the USB stick, and before getting any install menu, I got this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JAmOm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JAmOm.jpg&quot; alt=&quot;elementary OS installation error &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remark: I tried to install Ubuntu to check my computer, I got the same error with &gt; Ubuntu 16.X. But it's working with all Ubuntu (I tested the liveUSB mode only) &amp;lt;= 15.X, and finally it's working with elementary OS Freya (based on Ubuntu 14.X, if I remember well).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't find out what change between these version yet :/ Any idea ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;Right, I've found in this thread the beginning of my answer: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=226400&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=226400&lt;/a&gt;.&#xA;So, something's wrong with my graphic card driver (nvidia GTX 970). However, even after many try, I didn't succeed to add this &quot;&lt;em&gt;modprobe.blacklist=nouveau&lt;/em&gt;&quot; to the kernel parameter yet.&lt;/p&gt;&#xA;" OwnerUserId="11935" LastEditorUserId="308" LastEditDate="2018-08-07T16:44:24.593" LastActivityDate="2018-08-07T16:44:24.593" Title="SOLVED: Can't install elementary OS Loki: nouveau init failed (MMIO write fault)" Tags="|release-loki|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13109" PostTypeId="1" AcceptedAnswerId="13112" CreationDate="2017-08-25T22:21:21.440" Score="0" ViewCount="140" Body="&lt;p&gt;So I installed fcitx and installed a Japanese font, (Anthy). When I turn it off to type with my US layout keyboard, the special characters are mixmatched. the colon key makes a +. The equality key returns a ^. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went to system settings &gt; keyboard and found that I was, according to the system, with the US layout. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to restore the keyboard layout to default, or how to access the config file?  &lt;/p&gt;&#xA;" OwnerUserId="11936" LastActivityDate="2017-08-27T08:01:15.410" Title="Keyboard Layout Not US after installing fcitx" Tags="|keyboard|language|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13112" PostTypeId="2" ParentId="13109" CreationDate="2017-08-26T10:58:48.927" Score="1" Body="&lt;p&gt;What's used in the second field of the layout? Maybe you can change it to default there. (Or simply delete your current layout and add a fresh one)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lqLrb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lqLrb.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-08-27T08:01:15.410" LastActivityDate="2017-08-27T08:01:15.410" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13113" PostTypeId="2" ParentId="13108" CreationDate="2017-08-26T11:45:20.917" Score="1" Body="&lt;p&gt;Got it !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following the thread I mentioned in my last edit, I followed this guide &lt;a href=&quot;https://wiki.archlinux.org/index.php/Kernel_parameters&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Kernel_parameters&lt;/a&gt;, and added the statement:&#xA;&lt;strong&gt;modprobe.blacklist=nouveau&lt;/strong&gt; in all *.cfg files contained in the (USB-STICK)&quot;/boot/grub&quot; directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Voilà :)&lt;/p&gt;&#xA;" OwnerUserId="11935" LastActivityDate="2017-08-26T11:45:20.917" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13114" PostTypeId="2" ParentId="13109" CreationDate="2017-08-26T12:46:14.833" Score="0" Body="&lt;p&gt;I did what @Eric G suggested, but I deleted the old layout setting, so that I didn't have any layouts, and clicked that plus button, went down to my language (US English) and selected default. Everything seems to be working! Thanks Eric!&lt;/p&gt;&#xA;" OwnerUserId="11936" LastActivityDate="2017-08-26T12:46:14.833" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13115" PostTypeId="2" ParentId="4773" CreationDate="2017-08-26T15:55:17.423" Score="-2" Body="&lt;p&gt;Try the program &lt;code&gt;imagewriter&lt;/code&gt;. Use this command to install: &lt;code&gt;sudo apt install usb-imagewriter&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="11944" LastEditorUserId="242" LastEditDate="2017-09-30T01:51:41.670" LastActivityDate="2017-09-30T01:51:41.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13116" PostTypeId="1" CreationDate="2017-08-27T09:27:04.050" Score="0" ViewCount="675" Body="&lt;p&gt;Is there any way to configure &lt;kbd&gt;SUPER&lt;/kbd&gt; (aka &lt;kbd&gt;WINKEY&lt;/kbd&gt;) to launch window overview, like in Gnome?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried the commands below for app launcher and it works.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;settings set org.gnome.mutter overlay-key &quot;'Super_L'&quot;&#xA;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'wingpanel --toggle-indicator=app-launcher'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;from here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1946/have-application-menu-open-up-with-only-windows-key&quot;&gt;Have application menu open up with only Windows/Super key&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, what would be the command to replace &quot;app-launcher&quot; by &quot;window overview&quot;?&lt;/p&gt;&#xA;" OwnerUserId="11949" LastEditorUserId="14940" LastEditDate="2019-01-02T14:19:00.187" LastActivityDate="2020-07-29T15:19:49.113" Title="Super Key only for window overview - elementaryOS" Tags="|release-loki|wingpanel|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13118" PostTypeId="1" AcceptedAnswerId="13126" CreationDate="2017-08-27T10:44:09.563" Score="1" ViewCount="3895" Body="&lt;p&gt;This is similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7736/elementary-os-doesnt-recognize-my-partitions/7741#7741&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While trying to install elementary OS as a dual boot to existing Windows, the elementary's installer does not &quot;see&quot; the target HDD:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/CGUu2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CGUu2.png&quot; alt=&quot;Installer does not see the HDD&quot;&gt;&lt;/a&gt;&#xA;It can only see an external HDD (/dev/sdc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's some diagnostic output which all seem fine to me: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary@elementary:~$ sudo fdisk -l /dev/sda&#xA;Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors&#xA;Units: sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 4096 bytes&#xA;I/O size (minimum/optimal): 4096 bytes / 4096 bytes&#xA;Disklabel type: dos&#xA;Disk identifier: 0xb48e151f&#xA;&#xA;Device     Boot     Start       End   Sectors  Size Id Type&#xA;/dev/sda1  *         2048   1538047   1536000  750M  7 HPFS/NTFS/exFAT&#xA;/dev/sda2         1538048 662199299 660661252  315G  7 HPFS/NTFS/exFAT&#xA;/dev/sda3       662200320 976773119 314572800  150G 83 Linux&#xA;elementary@elementary:~$ sudo parted /dev/sda print&#xA;Model: ATA HGST HTS725050A7 (scsi)&#xA;Disk /dev/sda: 500GB&#xA;Sector size (logical/physical): 512B/4096B&#xA;Partition Table: msdos&#xA;Disk Flags: &#xA;&#xA;Number  Start   End    Size   Type     File system  Flags&#xA; 1      1049kB  787MB  786MB  primary  ntfs         boot&#xA; 2      787MB   339GB  338GB  primary  ntfs&#xA; 3      339GB   500GB  161GB  primary  ext4&#xA;&#xA;elementary@elementary:~$ sudo gdisk -l /dev/sda&#xA;GPT fdisk (gdisk) version 1.0.1&#xA;&#xA;Partition table scan:&#xA;  MBR: MBR only&#xA;  BSD: not present&#xA;  APM: not present&#xA;  GPT: not present&#xA;&#xA;&#xA;***************************************************************&#xA;Found invalid GPT and valid MBR; converting MBR to GPT format&#xA;in memory. &#xA;***************************************************************&#xA;&#xA;Disk /dev/sda: 976773168 sectors, 465.8 GiB&#xA;Logical sector size: 512 bytes&#xA;Disk identifier (GUID): 493E05A6-4E6B-4FD5-BA37-045C762F28D4&#xA;Partition table holds up to 128 entries&#xA;First usable sector is 34, last usable sector is 976773134&#xA;Partitions will be aligned on 2048-sector boundaries&#xA;Total free space is 3049 sectors (1.5 MiB)&#xA;&#xA;Number  Start (sector)    End (sector)  Size       Code  Name&#xA;   1            2048         1538047   750.0 MiB   0700  Microsoft basic data&#xA;   2         1538048       662199299   315.0 GiB   0700  Microsoft basic data&#xA;   3       662200320       976773119   150.0 GiB   8300  Linux filesystem&#xA;elementary@elementary:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also GParted sees the target drive and the 150GB partition intended for elementary:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xOXkz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xOXkz.png&quot; alt=&quot;Gparted sees the HDD&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most importantly the laptop, I try to install it on, has these options for SATA controller in BIOS:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;ATA&lt;/li&gt;&#xA;&lt;li&gt;AHCI&lt;/li&gt;&#xA;&lt;li&gt;Intel Rapid Storage Technology (it uses an intermediate&#xA;32GB SSD to cache most used files)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Before trying to make the laptop dual boot, this option was set to Intel Rapid Storage Technology.&#xA;Changing this option to ATA or AHCI (which stops Windows from booting) yielded the same results; the installer does not detect the hard drive at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am also booting elementary OS in BIOS-compatibility mode (not UEFI).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas an/or suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="11951" LastEditorUserId="13575" LastEditDate="2018-02-03T23:46:17.700" LastActivityDate="2018-02-03T23:46:17.700" Title="Hard drive not seen by elementary's installer" Tags="|system-installation|dual-boot|microsoft-windows|hdd|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13119" PostTypeId="1" AcceptedAnswerId="13123" CreationDate="2017-08-27T17:12:46.043" Score="1" ViewCount="156" Body="&lt;p&gt;I bought a bunch of apps from Appcenter, but for reasons I had to reinstall my OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way for me to have those apps again without paying for them?&lt;/p&gt;&#xA;" OwnerUserId="11954" LastEditorUserId="11954" LastEditDate="2017-08-27T17:35:07.470" LastActivityDate="2017-08-27T20:55:17.080" Title="How do I get back that app that I bought after reinstall?" Tags="|release-loki|applications|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13121" PostTypeId="2" ParentId="13082" CreationDate="2017-08-27T17:57:27.007" Score="0" Body="&lt;p&gt;Try &quot;powertop&quot; in terminal and check what is eating your battery.&lt;/p&gt;&#xA;" OwnerUserId="7067" LastActivityDate="2017-08-27T17:57:27.007" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13123" PostTypeId="2" ParentId="13119" CreationDate="2017-08-27T20:55:17.080" Score="4" Body="&lt;p&gt;Click on the price and enter 0.&lt;/p&gt;&#xA;" OwnerUserId="11960" LastActivityDate="2017-08-27T20:55:17.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13126" PostTypeId="2" ParentId="13118" CreationDate="2017-08-28T12:01:04.043" Score="1" Body="&lt;p&gt;As often happens I found a solution myself:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem seemed indeed in Intel Rapid Storage Technology.&#xA;If you log into Windows and disable acceleration of the hard drive with SSD, then reboot into elementary installer; the installer seem to be able to detect the laptop's hard drive. At least it was in my case.&#xA;I installed elementary into the target partition (150 GB on the pics above) on the HDD successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this you can even re-enable IRST and Windows partitions of the HD will still be browsable from elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is probably not specific to only elementary installer. Debian's installer also could not see the hard drive. Albeit I did not try installing Debian after disabling IRST.&lt;/p&gt;&#xA;" OwnerUserId="11951" LastActivityDate="2017-08-28T12:01:04.043" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13127" PostTypeId="1" CreationDate="2017-08-28T12:56:17.160" Score="1" ViewCount="1015" Body="&lt;p&gt;Have recently installed Elementary (Loki version) on my Chuwi H13 computer. Have activated the onboard virtual keyboard to &quot;show when needed&quot; and most of the time when I'm logged in and would like to type things in Google search fields and in terminals and such, it works just fine! BUT when locking the screen (wether manually or automatically due to inactivity), and I want to login again, I cannot type any password because I have no physical keyboard attached and the Onboard virtual keyboard is not visible on the lockscreen! Very annoying! Any suggestions would be very helpful! Thanks!&lt;/p&gt;&#xA;" OwnerUserId="11969" LastActivityDate="2017-10-21T14:49:04.627" Title="How to make the onboard virtual keyboard displayed on greeter page (lockscreen)" Tags="|greeter|touchscreen|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13132" PostTypeId="2" ParentId="6808" CreationDate="2017-08-28T21:34:58.553" Score="0" Body="&lt;p&gt;easy fix is, Go to AppCenter. Install Xterm then it works if you have Terminal=true &lt;/p&gt;&#xA;" OwnerUserId="11974" LastActivityDate="2017-08-28T21:34:58.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13133" PostTypeId="1" CreationDate="2017-08-28T23:54:33.500" Score="1" ViewCount="133" Body="&lt;p&gt;I'm trying to play the sound output from my computer simultaneously in two bluetooth headsets using paprefs. While the sound plays in both devices, it seems only one of them can use the A2DP configuration (always the first that was connected), while the other gets stuck with the poor quality configuration. Despite the sound configuration panel lets me choose between A2DP and HSP, any selection leads to HSP sound for the device connected the second. Is this a limitation of the bluetooth adapter bandwidth?&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2017-08-28T23:54:33.500" Title="Duplicating A2DP sound output with paprefs" Tags="|sound|bluetooth|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13134" PostTypeId="1" CreationDate="2017-08-29T08:46:27.680" Score="2" ViewCount="109" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tiYNY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tiYNY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Wingpanel it seems that I have no or low wifi-connection. But my connection works fine. If I click on the wifi-icon and the list opens up, than all the curved lines of my connection are highlighted. But when I look at the icon alone, no line is highlighted. How can I fix this? (I am new at Linux and Loki.)&lt;/p&gt;&#xA;" OwnerUserId="11980" LastEditorDisplayName="user12002" LastEditDate="2017-08-31T15:14:16.183" LastActivityDate="2024-04-06T05:01:20.153" Title="Wifi Notification in Wingpanel doesn't correspond with real status" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13135" PostTypeId="1" CreationDate="2017-08-29T09:38:38.497" Score="0" ViewCount="106" Body="&lt;p&gt;I am running elementary os 0.4.1 on my macbook 4.1 (2008). Always when I watch a video on fullscreen in Firefox I cant exit the fullscreen mode after a few minutes. At the beginning it is no problem. No key shortcuts are working. the only option is to shutdown the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help!&lt;/p&gt;&#xA;" OwnerUserId="11981" LastActivityDate="2019-04-24T13:30:15.860" Title="Locked in Fullscreen. Can't exit" Tags="|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13136" PostTypeId="2" ParentId="13135" CreationDate="2017-08-29T10:24:41.783" Score="1" Body="&lt;p&gt;Try the following:&lt;br&gt;&#xA;Launch the Terminal from keyboard: &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt;&lt;br&gt;&#xA;Use the command: &lt;code&gt;killall firefox&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="16827" LastEditDate="2019-04-24T13:30:15.860" LastActivityDate="2019-04-24T13:30:15.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13137" PostTypeId="5" CreationDate="2017-08-29T13:42:43.240" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2017-08-29T13:42:43.240" LastActivityDate="2017-08-29T13:42:43.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13138" PostTypeId="4" CreationDate="2017-08-29T13:42:43.240" Score="0" Body="Questions related to touchscreen functionality and configuration when using Elementary OS with hardware such as a tablet (no physical keyboard) or a 2-in-1 laptop." OwnerUserId="11969" LastEditorUserId="11969" LastEditDate="2017-08-30T06:39:47.607" LastActivityDate="2017-08-30T06:39:47.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13139" PostTypeId="1" CreationDate="2017-08-29T14:13:03.353" Score="1" ViewCount="294" Body="&lt;p&gt;Hello Elementary OS support community,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, I'm a lifetime Linux user - so I'm very familiar with the intricacies of installing and working with Linux. Second, I can't seem to install 0.4.1 on my computer that has an nVidia 1060 6GB video card in it, as it get's stuck while it's trying to boot with 2 errors, as you can see here: &lt;a href=&quot;https://i.stack.imgur.com/fhrwp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;boot errors&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I added &quot;modprobe.blacklist=nouveau&quot; to the kernel boot parameters, it get's rid of the second error, but I get no further because the first is still there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system configuration is as follows:&#xA; - Asus A88x-Pro Motherboard&#xA; - AMD A10-7850K Processor&#xA; - nVidia 1060 6GB video card&#xA; - 8GB RAM&#xA; - Samsung EVO 250GB SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any and all pointers would be appreicated. And if anyone needs further information about my setup, please let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks guys!&#xA;-Ben&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I was able to eventually figure this out, although it was a bit more manual labor than I had hoped. For anyone else that wants to try this, here you go:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Goto your BIOS and make sure you use the internal GFX rather than external graphics card.&lt;/li&gt;&#xA;&lt;li&gt;Make sure you're physically connected to the internal graphics card via HDMI or whatever is appropriate.&lt;/li&gt;&#xA;&lt;li&gt;Boot from USB, and hit &quot;e&quot; to edit the boot options when the boot from USB first starts.&lt;/li&gt;&#xA;&lt;li&gt;Before the &quot;--&quot; at the end of the boot options line, add the following: &quot;nomodeset rdblacklist=nouveau&quot;&lt;/li&gt;&#xA;&lt;li&gt;Install normally, and then reboot.&lt;/li&gt;&#xA;&lt;li&gt;Install updates from App Center, and then choose to install the appropriate nVidia drivers from the Updates tab.&lt;/li&gt;&#xA;&lt;li&gt;Reboot back to the BIOS, re-enable external graphics cards, then shut down.&lt;/li&gt;&#xA;&lt;li&gt;Reconnect your monitor(s) as you wish.&lt;/li&gt;&#xA;&lt;li&gt;Power up the PC and proceed to enjoy Elementary OS in all it's glory.&lt;/li&gt;&#xA;&lt;li&gt;(optional) Develop some awesome apps for Elementary OS and submit them to the App Center!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="11985" LastEditorUserId="11985" LastEditDate="2017-08-29T16:20:22.367" LastActivityDate="2017-09-13T04:37:18.253" Title="Can't install 0.4.1 (latest) from USB with nVidia 1060 (SOLVED)" Tags="|boot|nvidia|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13140" PostTypeId="1" CreationDate="2017-08-29T14:16:29.830" Score="0" ViewCount="87" Body="&lt;p&gt;I have been given an old Macbook and was asked to wipe and restore the OS. &#xA;I followed the allpe guides but the Macbook is failing to install via the internet recovery service. &#xA;Apple them selfs have said that a physical copy of the OS could get the Macbook running again but its a problem to find a physical copy of old OS.&#xA;So i was just wondering if it would be possible to install elementary OS without the Macbook having a working OS on it. &#xA;For some extra infomation i can get to disk utility and the terminal if needed to and i have a windows pc to make the usb drive. &#xA;Thank you for the help &lt;/p&gt;&#xA;" OwnerUserId="11986" LastActivityDate="2017-08-30T15:46:17.797" Title="Is it possible to install on to a mac with no OS currently installed" Tags="|system-installation|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13141" PostTypeId="1" CreationDate="2017-08-29T20:07:50.920" Score="1" ViewCount="140" Body="&lt;p&gt;The system detect the monitor but the monitor says &quot;not signal&quot;, with Windows 10 works great. I have Elementary OS 0.4.1 loki installed and Intel HD Graphics.&lt;/p&gt;&#xA;" OwnerUserId="11984" LastActivityDate="2017-12-26T05:03:05.303" Title="HDMI second monitor not displaying" Tags="|hdmi|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13142" PostTypeId="1" CreationDate="2017-08-30T00:16:12.107" Score="3" ViewCount="69" Body="&lt;p&gt;Just installed eOS (Loki), and I like it so far.  I have one small question that I can't find an answer to online, though:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Ubuntu, there's an option in a window's title bar context menu to &quot;display on every desktop&quot; so that no matter what workspace I'm on, my Instant Message app is visible (for example).  Is there a similar option for the eOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10704/can-i-configure-an-app-to-be-always-visible-across-all-workspaces&quot;&gt;this question&lt;/a&gt; (unanswered after 6 months).  Thanks!&lt;/p&gt;&#xA;" OwnerUserId="11990" LastActivityDate="2017-09-07T06:23:48.097" Title="Can a window be shown on every desktop?" Tags="|release-loki|desktop|window-management|workspace|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13144" PostTypeId="2" ParentId="13140" CreationDate="2017-08-30T15:46:17.797" Score="4" Body="&lt;p&gt;It's possible if you have an Intel CPU, you just need&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementary.io/&quot; rel=&quot;noreferrer&quot;&gt;Download the ISO&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;noreferrer&quot;&gt;Create a bootable USB drive in Windows with Rufus or Etcher&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#booting-from-the-installation-medium&quot; rel=&quot;noreferrer&quot;&gt;Inserting your install  USB drive on the MacBook&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Start your MacBook.&lt;/li&gt;&#xA;&lt;li&gt;After you hear the chime, press and hold &lt;code&gt;Option&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Shortly after selecting the appropriate boot drive, you should be presented with the elementary OS splash screen. You may now follow the on-screen instructions which will guide you through the rest of the process.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Ref: &lt;a href=&quot;https://elementary.io/en/docs/installation#installation&quot; rel=&quot;noreferrer&quot;&gt;Oficial Install Guide by Elementary OS for Mac&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="678" LastActivityDate="2017-08-30T15:46:17.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13151" PostTypeId="1" CreationDate="2017-08-31T10:52:52.763" Score="2" ViewCount="79" Body="&lt;p&gt;When there is some maximized window (browser, LibreOffice etc.) and i try to open Mail (from Plank or from new mail notification), it opens on background and on the bottom right corner of the screen, not in the middle. I have to minimize any window or open Mail on new workspace to avoid it. Any idea how to open it on the top and in the middle of the screen? &lt;/p&gt;&#xA;" OwnerDisplayName="user12002" LastActivityDate="2017-08-31T10:52:52.763" Title="Mail opens on background" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13152" PostTypeId="1" AcceptedAnswerId="13203" CreationDate="2017-08-31T12:48:37.227" Score="0" ViewCount="1898" Body="&lt;p&gt;I edited a .desktop (mtPaint) file to add missing mime types it can handle:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  MimeType=image/x-targa;image/x-tga;image/x-pcx;image/gif;image/png;image/x-xpixmap;image/x-xpm;image/tiff;image/tiff-fx;image/x-ms-bmp;image/jpeg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I don't get File to recognize this App when &quot;Open with&quot; on a file of that type. I tried logoff &amp;amp; login.&lt;/p&gt;&#xA;" OwnerUserId="5056" LastEditorUserId="84" LastEditDate="2018-05-06T18:15:01.710" LastActivityDate="2018-05-06T18:15:01.710" Title="How do reload the mime types after change .desktop file so Files know new app on &quot;Open with&quot; menu" Tags="|pantheon-files|app-shortcuts|mimetype|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13156" PostTypeId="1" AcceptedAnswerId="13171" CreationDate="2017-09-01T13:31:52.953" Score="1" ViewCount="556" Body="&lt;p&gt;When deleting a file it plays a paper crunching sound. I keep my Desktop volume at max and adjust in-app sounds. This paper crunching sound is really loud when earphones are plugged in. &#xA;How can I disable or reduce its volume?&lt;/p&gt;&#xA;" OwnerUserId="12016" LastEditorUserId="84" LastEditDate="2018-05-06T18:40:57.733" LastActivityDate="2020-03-08T16:59:36.603" Title="How to disable sound effect of deleting files in Elementary OS 0.4.1 Loki?" Tags="|release-loki|settings|pantheon-files|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13157" PostTypeId="2" ParentId="7886" CreationDate="2017-09-01T18:12:13.697" Score="8" Body="&lt;p&gt;This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10089" LastActivityDate="2017-09-01T18:12:13.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13160" PostTypeId="1" CreationDate="2017-09-01T21:32:18.253" Score="0" ViewCount="115" Body="&lt;p&gt;I'm trying to setup my keyboard layout to Brazilian Portuguese.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Brazil, some words need accents (café, jóia, etc..) and I'm trying all available keyboard layout and language configurations, including to change the default OS language, without good results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Elementary inside Oracle Virtual box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alexandre&lt;/p&gt;&#xA;" OwnerUserId="12020" LastEditorUserId="84" LastEditDate="2021-07-27T21:17:05.803" LastActivityDate="2021-07-27T21:17:05.803" Title="OS 0.4.1 - Brazilian Portuguese keyboard layout" Tags="|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13161" PostTypeId="1" CreationDate="2017-09-01T22:03:20.283" Score="0" ViewCount="584" Body="&lt;p&gt;I am trying to install the MFC9130CW printer that I have on my wireless network. FOllowing the instructions on the brother website, I have installed the necessary drivers via their deb files. However, I still cannot print. It should not be a network error, as all other computers in the house are able to print (running other OS's).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In so far, I have tried various combinations of connections (i.e. socket, ipp, ipps, etc.), but to know avail. Maybe I am doing it wrong?  I am running the latest version of ElementaryOS. The printer is on 192.168.1.23 on my local network. Please let me know what I should try to get this thing working! I'll start all over if need be. It is driving me crazy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&#xA;~Lucian&lt;/p&gt;&#xA;" OwnerUserId="11779" LastActivityDate="2022-02-02T19:30:18.480" Title="Brother MFC9130CW Network Printer not Working" Tags="|printer|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13162" PostTypeId="2" ParentId="12259" CreationDate="2017-09-01T22:25:46.667" Score="0" Body="&lt;p&gt;According to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10349&quot;&gt;this post&lt;/a&gt; it should be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.terminal -e &quot;emacs&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;answer updated for Juno &amp;amp; Hera&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2020-04-30T08:43:08.753" LastActivityDate="2020-04-30T08:43:08.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13163" PostTypeId="2" ParentId="13160" CreationDate="2017-09-01T22:47:37.260" Score="1" Body="&lt;p&gt;Open Slingshot and search for &quot;Keyboard&quot;, click on the highlighted result:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pshCE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pshCE.png&quot; alt=&quot;Slingshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Search for Portuguese (Brazil) and add it as a Layout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Z69y0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z69y0.png&quot; alt=&quot;Keyboard settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can add accents!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/T5tzJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/T5tzJ.png&quot; alt=&quot;Testing the keyboard layout&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-09-01T22:47:37.260" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13165" PostTypeId="2" ParentId="8544" CreationDate="2017-09-02T01:11:04.757" Score="0" Body="&lt;p&gt;Elementary OS does not yet support touch but soon they will we have plans&lt;/p&gt;&#xA;" OwnerUserId="12023" LastActivityDate="2017-09-02T01:11:04.757" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13166" PostTypeId="2" ParentId="13152" CreationDate="2017-09-02T11:19:49.363" Score="1" Body="&lt;p&gt;I think you need to update the miminfo.cache using update-desktop-database command.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-09-02T11:19:49.363" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13167" PostTypeId="1" AcceptedAnswerId="13170" CreationDate="2017-09-02T14:56:20.403" Score="0" ViewCount="474" Body="&lt;p&gt;Tried to install elementary OS the same way I used to before - Leave free space at the time of Windows installation and then just split it up during elementary OS installation. But now there's no options for it, at the begging in doesn't even offer side by side install (just option to delete Windows 10). Option of installation called &quot;Something Else&quot; gives me partition but doesn't allow me to split up &quot;unusable&quot; partition (+ and - buttons are greyed out). Why is it unusable?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I missing something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link to picture of this situation - &lt;a href=&quot;https://i.stack.imgur.com/bi6Vn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/bi6Vn.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12027" LastEditorUserId="308" LastEditDate="2018-08-07T18:07:49.257" LastActivityDate="2018-08-07T18:08:30.477" Title="Can't do dualboot with Windows 10, options missing" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13170" PostTypeId="2" ParentId="13167" CreationDate="2017-09-02T15:55:39.080" Score="4" Body="&lt;p&gt;You're booting elementary OS in BIOS/MBR/Legacy mode, which allows only up to 4 primary partitions per disk drive. Booting in EFI/UEFI will allow you to install both OSes in UEFI mode, but you need to recreate the disk's partition table and use the GPT one for this to work, because GPT or GUID Partition Table supports up to 128 primary partitions.If Windows is installed in Legacy mode, you'll have to reinstall both OSes. If your machine doesn't support UEFI/EFI, you'll have to fit in 4 parts max. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12029" LastEditorUserId="308" LastEditDate="2018-08-07T18:08:30.477" LastActivityDate="2018-08-07T18:08:30.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13171" PostTypeId="2" ParentId="13156" CreationDate="2017-09-02T16:00:27.453" Score="1" Body="&lt;p&gt;System Settings &gt; Sound Settings &gt; Sound Effects &gt; Mute;&lt;/p&gt;&#xA;" OwnerUserId="12029" LastActivityDate="2017-09-02T16:00:27.453" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13172" PostTypeId="1" CreationDate="2017-09-03T18:02:46.903" Score="0" ViewCount="1491" Body="&lt;p&gt;Just installed EOS on my laptop. First issue is that when it asks me to reboot to finish installation the reboot button is greyed out. After waiting about 10 minutes I just hard reset the laptop. After boot I get the login screen. I log in and the login screen disappears and the desktop never appears. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop is msi gs63vr. Elementary os has worked on this laptop in the past. &lt;/p&gt;&#xA;" OwnerUserId="8651" LastEditorUserId="8651" LastEditDate="2017-09-04T03:43:37.537" LastActivityDate="2018-03-03T22:36:23.667" Title="No desktop after logging in - fresh install" Tags="|greeter|" AnswerCount="2" CommentCount="1" ClosedDate="2018-03-11T02:00:02.987" ContentLicense="CC BY-SA 3.0" />
  <row Id="13175" PostTypeId="2" ParentId="8927" CreationDate="2017-09-04T01:55:15.550" Score="4" Body="&lt;p&gt;I wanted this functionality as well but couldn't find it online anywhere. It looks like the Hibernate option was removed a long time ago because it fails on some systems (which perhaps was the case a long time ago :-). On my Dell XPS 9350, hibernate works just fine with elementary OS (via 'sudo systemctl hibernate').&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This aspect of elementary OS is handled by the &quot;wingpanel&quot;, and more specifically, by the wingpanel's session indicator application (the specific indicator that provides the 'power button' icon on the top right corner of the screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to get this functionality, I had to download the latest source code for the wingpanel session indicator, learn how to compile and install it, and learn how to add the missing functionality. If you have a background in coding it's fairly straight forward, if not, hopefully this guideline will help you figure it out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;, in order to hibernate as my regular user (and not the root user) I added the following to /etc/sudoers (although now I'm not sure if that's entirely necessary or not, previously I wrote my own indicator app to perform hiberntaion but this alternative is more elegant):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;devin ALL = (root) NOPASSWD: /bin/systemctl&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;(where devin is my regular user name)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The changes I had to make were as follows. Note that instructions for building are shown later in this post.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;add a new file named HibernateDialog.vala in the folder src/Widgets (based on the existing EndSessionDialog.vala in the same folder), contents of which are as follows:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;/*&#xA; * Copyright (c) 2011-2015 Tom Beckmann&#xA; *&#xA; * This program is free software; you can redistribute it and/or&#xA; * modify it under the terms of the GNU General Public&#xA; * License as published by the Free Software Foundation; either&#xA; * version 2 of the License, or (at your option) any later version.&#xA; *&#xA; * This program is distributed in the hope that it will be useful,&#xA; * but WITHOUT ANY WARRANTY; without even the implied warranty of&#xA; * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU&#xA; * General Public License for more details.&#xA; *&#xA; * You should have received a copy of the GNU General Public&#xA; * License along with this program; if not, write to the&#xA; * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,&#xA; * Boston, MA 02110-1301 USA&#xA; */&#xA;&#xA;public class Session.Widgets.HibernateDialog : Gtk.Dialog {&#xA;&#xA;    public HibernateDialog () {&#xA;        Object (&#xA;            title: &quot;&quot;,&#xA;            deletable: false,&#xA;            resizable: false,&#xA;            skip_taskbar_hint: true,&#xA;            skip_pager_hint: true,&#xA;            type_hint: Gdk.WindowTypeHint.DIALOG&#xA;        );&#xA;    }&#xA;&#xA;    construct {&#xA;        string icon_name, heading_text, button_text, content_text;&#xA;&#xA;        icon_name = &quot;system-log-out&quot;;&#xA;        heading_text = &quot;Are you sure you want to Hibernate this computer?&quot;;&#xA;        content_text = &quot;This will save the contents of RAM to disk and shut down the computer.&quot;;&#xA;        button_text = &quot;Hibernate&quot;;&#xA;&#xA;        set_position (Gtk.WindowPosition.CENTER_ALWAYS);&#xA;        set_keep_above (true);&#xA;        stick ();&#xA;&#xA;        var image = new Gtk.Image.from_icon_name (icon_name, Gtk.IconSize.DIALOG);&#xA;        image.valign = Gtk.Align.START;&#xA;&#xA;        var heading = new Gtk.Label (heading_text);&#xA;        heading.get_style_context ().add_class (&quot;primary&quot;);&#xA;        heading.xalign = 0;&#xA;&#xA;        var secondary_label = new Gtk.Label (content_text);&#xA;        secondary_label.xalign = 0;&#xA;&#xA;        var grid = new Gtk.Grid ();&#xA;        grid.column_spacing = 12;&#xA;        grid.row_spacing = 6;&#xA;        grid.margin_left = grid.margin_right = grid.margin_bottom = 12;&#xA;        grid.attach (image, 0, 0, 1, 2);&#xA;        grid.attach (heading, 1, 0, 1, 1);&#xA;        grid.attach (secondary_label, 1, 1, 1, 1);&#xA;&#xA;        var cancel = add_button (_(&quot;Cancel&quot;), Gtk.ResponseType.CANCEL) as Gtk.Button;&#xA;        cancel.clicked.connect (() =&amp;gt; { destroy (); });&#xA;&#xA;        var confirm = add_button (button_text, Gtk.ResponseType.OK) as Gtk.Button;&#xA;        confirm.get_style_context ().add_class (&quot;destructive-action&quot;);&#xA;        confirm.clicked.connect (() =&amp;gt; {&#xA;            try {&#xA;                Posix.system(&quot;systemctl hibernate&quot;);&#xA;            } catch (IOError e) {&#xA;                stderr.printf (&quot;%s\n&quot;, e.message);&#xA;            }&#xA;&#xA;            destroy ();&#xA;        });&#xA;&#xA;        set_default (confirm);&#xA;&#xA;        get_content_area ().add (grid);&#xA;&#xA;        var action_area = get_action_area ();&#xA;        action_area.margin = 6;&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Modify Indicator.vala to add a Hibernate button:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;/*&#xA; * Copyright (c) 2011-2017 elementary LLC. &#xA; *&#xA; * This program is free software; you can redistribute it and/or&#xA; * modify it under the terms of the GNU General Public&#xA; * License as published by the Free Software Foundation; either&#xA; * version 2 of the License, or (at your option) any later version.&#xA; *&#xA; * This program is distributed in the hope that it will be useful,&#xA; * but WITHOUT ANY WARRANTY; without even the implied warranty of&#xA; * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU&#xA; * General Public License for more details.&#xA; *&#xA; * You should have received a copy of the GNU General Public&#xA; * License along with this program; if not, write to the&#xA; * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,&#xA; * Boston, MA 02110-1301 USA&#xA; */&#xA;&#xA;public class Session.Indicator : Wingpanel.Indicator {&#xA;    private const string ICON_NAME = &quot;system-shutdown-symbolic&quot;;&#xA;&#xA;    private SystemInterface suspend_interface;&#xA;    private LockInterface lock_interface;&#xA;    private SeatInterface seat_interface;&#xA;&#xA;    private Wingpanel.IndicatorManager.ServerType server_type;&#xA;    private Wingpanel.Widgets.OverlayIcon indicator_icon;&#xA;    private Wingpanel.Widgets.Separator users_separator;&#xA;    private Wingpanel.Widgets.Button lock_screen;&#xA;    private Wingpanel.Widgets.Button log_out;&#xA;    private Wingpanel.Widgets.Button suspend;&#xA;    private Wingpanel.Widgets.Button shutdown;&#xA;    private Wingpanel.Widgets.Button hibernate;&#xA;&#xA;    private Session.Services.UserManager manager;&#xA;&#xA;    private Gtk.Grid main_grid;&#xA;    private Session.Widgets.EndSessionDialog? shutdown_dialog = null;&#xA;    private Session.Widgets.HibernateDialog? hibernate_dialog = null;&#xA;&#xA;    public Indicator (Wingpanel.IndicatorManager.ServerType server_type) {&#xA;        Object (code_name: Wingpanel.Indicator.SESSION,&#xA;                display_name: _(&quot;Session&quot;),&#xA;                description: _(&quot;The session indicator&quot;));&#xA;        this.server_type = server_type;&#xA;    }&#xA;&#xA;    public override Gtk.Widget get_display_widget () {&#xA;        if (indicator_icon == null) {&#xA;            indicator_icon = new Wingpanel.Widgets.OverlayIcon (ICON_NAME);&#xA;&#xA;            indicator_icon.button_press_event.connect ((e) =&amp;gt; {&#xA;                if (e.button == Gdk.BUTTON_MIDDLE) {&#xA;                    close ();&#xA;                    show_shutdown_dialog ();&#xA;                    return Gdk.EVENT_STOP;&#xA;                }&#xA;&#xA;                return Gdk.EVENT_PROPAGATE;&#xA;            });&#xA;        }&#xA;&#xA;        return indicator_icon;&#xA;    }&#xA;&#xA;    public override Gtk.Widget? get_widget () {&#xA;        if (main_grid == null) {&#xA;            init_interfaces ();&#xA;&#xA;            main_grid = new Gtk.Grid ();&#xA;            main_grid.set_orientation (Gtk.Orientation.VERTICAL);&#xA;&#xA;            log_out = new Wingpanel.Widgets.Button (_(&quot;Log Out…&quot;));&#xA;            lock_screen = new Wingpanel.Widgets.Button (_(&quot;Lock&quot;));&#xA;            shutdown = new Wingpanel.Widgets.Button (_(&quot;Shut Down…&quot;));&#xA;            suspend = new Wingpanel.Widgets.Button (_(&quot;Suspend&quot;));&#xA;            hibernate = new Wingpanel.Widgets.Button (&quot;Hibernate&quot;);&#xA;&#xA;            if (server_type == Wingpanel.IndicatorManager.ServerType.SESSION) {&#xA;                users_separator = new Wingpanel.Widgets.Separator ();&#xA;                manager = new Session.Services.UserManager (users_separator);&#xA;&#xA;                var scrolled_box = new Wingpanel.Widgets.AutomaticScrollBox (null, null);&#xA;                scrolled_box.max_height = 300;&#xA;                scrolled_box.set_policy (Gtk.PolicyType.NEVER, Gtk.PolicyType.AUTOMATIC);&#xA;                scrolled_box.add (manager.user_grid);&#xA;&#xA;                main_grid.add (scrolled_box);&#xA;&#xA;                if (manager.has_guest) {&#xA;                    manager.add_guest (false);&#xA;                }&#xA;&#xA;                main_grid.add (users_separator);&#xA;                main_grid.add (lock_screen);&#xA;                main_grid.add (log_out);&#xA;                main_grid.add (new Wingpanel.Widgets.Separator ());&#xA;            }&#xA;&#xA;            main_grid.add (suspend);&#xA;            main_grid.add (hibernate);&#xA;            main_grid.add (shutdown);&#xA;            main_grid.margin_top = 6;&#xA;&#xA;            connections ();&#xA;        }&#xA;&#xA;        this.visible = true;&#xA;&#xA;        return main_grid;&#xA;    }&#xA;&#xA;    private void init_interfaces () {&#xA;        try {&#xA;            suspend_interface = Bus.get_proxy_sync (BusType.SYSTEM,&quot;org.freedesktop.login1&quot;, &quot;/org/freedesktop/login1&quot;);&#xA;        } catch (IOError e) {&#xA;            stderr.printf (&quot;%s\n&quot;, e.message);&#xA;            suspend.set_sensitive (false);&#xA;        }&#xA;&#xA;        if (server_type == Wingpanel.IndicatorManager.ServerType.SESSION) {&#xA;            try {&#xA;                lock_interface = Bus.get_proxy_sync(BusType.SESSION, &quot;org.freedesktop.ScreenSaver&quot;, &quot;/org/freedesktop/ScreenSaver&quot;);&#xA;            } catch (IOError e) {&#xA;                stderr.printf (&quot;%s\n&quot;, e.message);&#xA;                lock_screen.set_sensitive (false);&#xA;            }&#xA;&#xA;            try {&#xA;                seat_interface = Bus.get_proxy_sync (BusType.SESSION, &quot;org.freedesktop.DisplayManager&quot;,&quot;/org/freedesktop/DisplayManager/Seat0&quot;);&#xA;            } catch (IOError e) {&#xA;                stderr.printf (&quot;%s\n&quot;, e.message);&#xA;                lock_screen.set_sensitive (false);&#xA;            }&#xA;        }&#xA;    }&#xA;&#xA;    public void connections () {&#xA;        manager.close.connect (() =&amp;gt; close ());&#xA;&#xA;        lock_screen.clicked.connect (() =&amp;gt; {&#xA;            close ();&#xA;            try {&#xA;                lock_interface.lock ();&#xA;            } catch (IOError e) {&#xA;                stderr.printf (&quot;%s\n&quot;, e.message);&#xA;            }&#xA;        });&#xA;&#xA;        log_out.clicked.connect (() =&amp;gt; {&#xA;            close ();&#xA;            var dialog = new Session.Widgets.EndSessionDialog (Session.Widgets.EndSessionDialogType.LOGOUT);&#xA;            dialog.set_transient_for (indicator_icon.get_toplevel () as Gtk.Window);&#xA;            dialog.show_all ();&#xA;        });&#xA;&#xA;        shutdown.clicked.connect (() =&amp;gt; {&#xA;            close ();&#xA;            show_shutdown_dialog ();&#xA;        });&#xA;&#xA;        hibernate.clicked.connect (() =&amp;gt; {&#xA;            close ();&#xA;            show_hibernate_dialog ();&#xA;        });&#xA;&#xA;        suspend.clicked.connect (() =&amp;gt; {&#xA;            close ();&#xA;            try {&#xA;                suspend_interface.suspend (true);&#xA;            } catch (IOError e) {&#xA;                stderr.printf (&quot;%s\n&quot;, e.message);&#xA;            }&#xA;        });&#xA;    }&#xA;&#xA;    public override void opened () {&#xA;        manager.update_all ();&#xA;    }&#xA;&#xA;    public override void closed () {}&#xA;&#xA;    private void show_shutdown_dialog () {&#xA;        if (shutdown_dialog == null) {&#xA;            shutdown_dialog = new Session.Widgets.EndSessionDialog (Session.Widgets.EndSessionDialogType.RESTART);&#xA;            shutdown_dialog.destroy.connect (() =&amp;gt; { shutdown_dialog = null; });&#xA;            shutdown_dialog.set_transient_for (indicator_icon.get_toplevel () as Gtk.Window);&#xA;            shutdown_dialog.show_all ();&#xA;        }&#xA;&#xA;        shutdown_dialog.present ();&#xA;    }&#xA;&#xA;    private void show_hibernate_dialog () {&#xA;        if (hibernate_dialog == null) {&#xA;            hibernate_dialog = new Session.Widgets.HibernateDialog ();&#xA;            hibernate_dialog.destroy.connect (() =&amp;gt; { hibernate_dialog = null; });&#xA;            hibernate_dialog.set_transient_for (indicator_icon.get_toplevel () as Gtk.Window);&#xA;            hibernate_dialog.show_all ();&#xA;        }&#xA;&#xA;        hibernate_dialog.present ();&#xA;    }&#xA;&#xA;}&#xA;&#xA;public Wingpanel.Indicator? get_indicator (Module module, Wingpanel.IndicatorManager.ServerType server_type) {&#xA;    debug (&quot;Activating Sample Indicator&quot;);&#xA;    var indicator = new Session.Indicator (server_type);&#xA;&#xA;    return indicator;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Modify src/CMakeLists.txt and add Widgets/EndSessionDialog.vala and posix package dependency, my src/CMakeLists.txt now looks like this:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;find_package (PkgConfig)&#xA;&#xA;# Add all your dependencies to the list below&#xA;pkg_check_modules (DEPS REQUIRED gthread-2.0 gtk+-3.0 gio-2.0 accountsservice wingpanel-2.0 granite)&#xA;&#xA;add_definitions (${DEPS_CFLAGS})&#xA;link_directories (${DEPS_LIBRARY_DIRS})&#xA;&#xA;find_package (Vala REQUIRED)&#xA;include (ValaVersion)&#xA;ensure_vala_version (&quot;0.22.0&quot; MINIMUM)&#xA;&#xA;include (ValaPrecompile)&#xA;# Add all your vala files and requires packages to the List below to include them in the build&#xA;vala_precompile (VALA_C ${CMAKE_PROJECT_NAME}&#xA;  Indicator.vala&#xA;  Widgets/UserBox.vala&#xA;  Widgets/UserListBox.vala&#xA;  Widgets/EndSessionDialog.vala&#xA;  Widgets/HibernateDialog.vala&#xA;  Services/UserManager.vala&#xA;  Services/DbusInterfaces.vala&#xA;  ${CMAKE_CURRENT_BINARY_DIR}/config.vala&#xA;PACKAGES&#xA;  gio-2.0&#xA;  gtk+-3.0&#xA;  wingpanel-2.0&#xA;  granite&#xA;  AccountsService-1.0&#xA;  posix&#xA;OPTIONS&#xA;  --thread&#xA;)&#xA;&#xA;add_library (${CMAKE_PROJECT_NAME} MODULE ${VALA_C})&#xA;target_link_libraries(${CMAKE_PROJECT_NAME} ${DEPS_LIBRARIES})&#xA;&#xA;# Installation&#xA;install (TARGETS ${CMAKE_PROJECT_NAME} DESTINATION ${PKGDATADIR})&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Rough guideline for recompiling and installing a new wingpanel session indicator is as follows. You'll likely need to install several missing libraries for it to compile to completion.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, if you get an error about a dependency missing, then use &quot;sudo apt-cache search dependency_name&quot; to find it. It was fairly straight forward when I tried this. I think there was one exception though, which was 'sudo apt-get install elementary-sdk' (for &quot;GObject&quot;).&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;download the latest wingpanel session indicator here:&#xA;&lt;a href=&quot;https://launchpad.net/wingpanel-indicator-session&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel session indicator&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;extract the .tar.xf file via 'tar xf wingpanel-indicator-session-2.0.3.tar.xz'&lt;/li&gt;&#xA;&lt;li&gt;cd wingpanel-indicator-session-2.0.3&lt;/li&gt;&#xA;&lt;li&gt;mkdir build&lt;/li&gt;&#xA;&lt;li&gt;cd build&lt;/li&gt;&#xA;&lt;li&gt;cmake .. -DCMAKE_INSTALL_PREFIX=/usr&lt;/li&gt;&#xA;&lt;li&gt;make (and when get dependency errors, then use 'sudo apt-cache search '&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;WARNING&lt;/strong&gt;: this last step with &quot;sudo make install&quot; will replace your current wingpanel session indicator with this one (and likely can't get it back), this should be fine as long as you're using a recent elementary OS (I think the latest is Loki as of this writing, so don't try this with older versions)&lt;/li&gt;&#xA;&lt;li&gt;sudo make install&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: I replaced the shutdown logo with my own logo. To do this, find all &quot;system-shutdown-symbolic&quot; icons in /usr/share and replace them with your own .svg icon file. For example, find the existing ones via:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;find /usr/share -name '*system-shutdown-symbolic*'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: I didn't care about the various translations for i18n so I just used hard coded English strings instead of _(&quot;string&quot;). I didn't feel like learning about i18n for this as I'm only ever using my PC in English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mLstn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mLstn.png&quot; alt=&quot;example hibernate option&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12045" LastActivityDate="2017-09-04T01:55:15.550" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13176" PostTypeId="2" ParentId="12947" CreationDate="2017-09-04T02:22:57.270" Score="1" Body="&lt;p&gt;What it sounds like is that your router(not your adapter) has an idle timeout, with the time set to a very low number. Assuming you have access, you could either find out if it's set that way through the router's Web interface (preferred), or do a factory reset on your router. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do the latter, make sure you record all of your settings, and if it's a company router, get IT involved, because no changes since the router was NIB will be saved.&lt;/p&gt;&#xA;" OwnerUserId="12046" LastActivityDate="2017-09-04T02:22:57.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13177" PostTypeId="2" ParentId="10202" CreationDate="2017-09-04T06:58:02.390" Score="1" Body="&lt;p&gt;I had the same problem on my HP Probook G4 laptop. It is issue of 16.10 kernel. Just turn off in Bios your ATI or Nvidia videocard. Graphical system will work on CPU. On 17.04 kernel hybrid graphical system works fine, you just need some time to wait for updates.&lt;/p&gt;&#xA;" OwnerUserId="12049" LastActivityDate="2017-09-04T06:58:02.390" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13179" PostTypeId="2" ParentId="13172" CreationDate="2017-09-04T12:28:05.680" Score="0" Body="&lt;p&gt;Try renaming at-spi-dbus-bus.desktop:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I think you're running into this bug:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug#1596377&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had a similar issue and this fixed it for me. You might have to boot into &lt;a href=&quot;https://askubuntu.com/questions/150367/how-do-i-boot-into-recovery-mode#150377&quot;&gt;recovery mode&lt;/a&gt; to access the terminal.&lt;/p&gt;&#xA;" OwnerUserId="4842" LastActivityDate="2017-09-04T12:28:05.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13182" PostTypeId="2" ParentId="13172" CreationDate="2017-09-04T16:04:52.197" Score="0" Body="&lt;p&gt;OK well this is silly and possibly entirely my own dumb fault. After clicking restart after the installation I didn't give it enough time. I let it sit at the grayed out restart button for about 5 minutes and that wasn't enough. This time I waited until it dropped to a command line, spit out some stuff, and when it seemed to be done (no real indication) I shut the laptop down with the power button. Booted it up and it launched fine.&lt;/p&gt;&#xA;" OwnerUserId="8651" LastActivityDate="2017-09-04T16:04:52.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13183" PostTypeId="1" CreationDate="2017-09-04T16:42:24.540" Score="2" ViewCount="195" Body="&lt;p&gt;Is it possible to create personal folders in the default mail tool on Pantheon-mail?&#xA;Is it possible to create a file (like .pst) to archive the messages and restore it if necessary?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alexandre&lt;/p&gt;&#xA;" OwnerUserId="12021" LastActivityDate="2017-09-04T16:42:24.540" Title="Pantheon Mail - Personal Folder" Tags="|pantheon-mail|pantheon|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13184" PostTypeId="2" ParentId="12833" CreationDate="2017-09-04T21:30:25.617" Score="1" Body="&lt;p&gt;Okay, so I solved the problem.&#xA;I needed to install and build elementary-tweaks as per the instructions found in the following link:&#xA;&lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I went into the System Settings application, and Tweaks was listed under the Personal category.&#xA;I went into Tweaks and under the Appearance setting, I switched on &quot;Show Gnome menu&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This fixed the problem! Hope this works for you all.&lt;/p&gt;&#xA;" OwnerUserId="11654" LastActivityDate="2017-09-04T21:30:25.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13185" PostTypeId="2" ParentId="10472" CreationDate="2017-09-04T21:32:10.867" Score="0" Body="&lt;p&gt;I had the same problem and &lt;code&gt;elementary-desktop&lt;/code&gt; was already installed and updated. So, i fixed it by getting &lt;code&gt;elementary+&lt;/code&gt; via external repository, this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cybre/elementaryplus&#xA;sudo apt-get update&#xA;sudo apt-get install elementaryplus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, I launched the application &quot;elementary+ Configurator&quot; and switched on the core-icon theme. Must be an easier way to do that but I just couldn't find it. Hope it works for someone.&lt;/p&gt;&#xA;" OwnerUserId="12056" LastActivityDate="2017-09-04T21:32:10.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13186" PostTypeId="1" CreationDate="2017-09-05T00:08:39.697" Score="0" ViewCount="446" Body="&lt;p&gt;I created a new calendar using my CALDAV server information (including full path to the calendar). This works in Thunderbird/Lightening. (I also verified the paths by logging in using Epiphany going directly to the path.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I create the calendar in Maya. However, I never get an error nor a prompt for a password. The calendar appears in the list of calendars but never syncs.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; I spent several hours on this and see that Maya automatically strips a port from the URL--for example, mycalendarurl.com:2080/calendars/ becomes mycalendarurl.com/calendars/ . I tried the URL less the port via a web browser and the missing port does not allow connection to the CALDAV server.&lt;/p&gt;&#xA;" OwnerUserId="12058" LastEditorUserId="16827" LastEditDate="2019-10-22T02:35:32.120" LastActivityDate="2019-10-22T02:35:32.120" Title="Maya Calendar No Password Prompt for CALDAV" Tags="|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13187" PostTypeId="2" ParentId="11800" CreationDate="2017-09-05T00:12:09.163" Score="0" Body="&lt;p&gt;To add a bit to lemonslice's recommendation, I would create a .desktop file linking to the script. Then add it to your startup via the System Settings. It works perfectly for me. Here is an example of what I've done...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;create a new text file and add the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash/&#xA;&#xA;xcaliber --bR=256 --bG=256 --bB=212 --gR=1.04 --gG=0.9600000000000001 --gB=1.01&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save as display.sh or something like that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then in the terminal navigate to the folder where your display.sh is saved and run the below command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x display.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the script as executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you need to create a desktop file so we can add the script to your startup. Open a new text file and name it something like xcaliber.desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;add the following to the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry] &#xA;Type=Application &#xA;Encoding=UTF-8 &#xA;Name=Display Setter Application &#xA;Comment=A script to set xcaliber settings &#xA;Exec=/path/to/display.sh //obviously here you want to add the true path to your file &#xA;Icon=/path/to/icon.png //and here you want to add the true path to your icon file if you want one different from the base gear &#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once that is done open System Settings &gt; Applications &gt; Startup (I think that's what it's called) and add your xcaliber setter application.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-05T18:12:33.137" LastActivityDate="2017-10-05T18:12:33.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13189" PostTypeId="1" AcceptedAnswerId="13190" CreationDate="2017-09-05T01:00:18.600" Score="0" ViewCount="1138" Body="&lt;p&gt;Why is is most of this unallocated space when I just used the USB the other day to install eOS, and the File Manager shows that all the files for eOS are still on there?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am just trying to get the USB back to its original state, with no files / default format. How do I do this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xqx86.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xqx86.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/01UKp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/01UKp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12022" LastActivityDate="2017-09-05T01:26:02.903" Title="Formatting USB stick via GParted - unallocated space?" Tags="|usb|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13190" PostTypeId="2" ParentId="13189" CreationDate="2017-09-05T01:26:02.903" Score="2" Body="&lt;p&gt;Assuming that &lt;code&gt;/dev/sdb&lt;/code&gt; is your USB stick, just delete the &lt;code&gt;/dev/sdb2&lt;/code&gt; partition then create a single partition from the resulting single unallocated chunk then format it to FAT32 or any format you want.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-09-05T01:26:02.903" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13191" PostTypeId="1" CreationDate="2017-09-05T09:44:47.400" Score="0" ViewCount="43" Body="&lt;p&gt;I would like to use Elementary as default OS, but for the moment there are still a bunch of little obstacles to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I save my official and professional mail-messages as text. This because I want to back it up and be able to search and read prior mails, without the use of a mail-client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think using Elementary while installing a bunch of other applications, is pointless, because then it is easier to use a distro which already has all those applications. The beauty of Elementary is it's simplicity, which would be lost if I stack it with other applications besides the original ones (this is different for applications which are just missing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts/solutions?&lt;/p&gt;&#xA;" OwnerUserId="8126" LastActivityDate="2017-09-05T14:36:08.960" Title="Save as txt in mail?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13193" PostTypeId="1" CreationDate="2017-09-05T11:13:13.010" Score="0" ViewCount="130" Body="&lt;p&gt;Weird bug persistent for a few days now - my Appcenter (including all notifications) is now in French &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CA0nh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CA0nh.png&quot; alt=&quot;screenshot attached&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have never used French as my OS language, nor am I located/have travelled to that region. I use English (UK) and am located in Slovakia.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The rest of the operating system respects my system wide language settings/preferences (which is English UK - and I have tried to change this to something else and back again but the problem persists)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also tried to purge my appcenter and appstream packages and reinstalled, but no luck there either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas about what might be going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I managed to get it back to english by using synaptic to force version from the stable repositories (rather than daily) - now the issue seems to be that no apps show up (either from the elementary app store or the normal repositories - but I have had this issue before and usually some combination of purge and reinstalling appstream from either the daily or stable repository fixes it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I guess this was just some weird issue brought on by myself, as a result of using the daily repositories...&lt;/p&gt;&#xA;" OwnerUserId="11726" LastEditorUserId="11726" LastEditDate="2017-09-05T11:30:01.090" LastActivityDate="2017-11-15T21:18:08.403" Title="Appcenter language now in french" Tags="|appcenter|language|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13194" PostTypeId="2" ParentId="13152" CreationDate="2017-09-05T11:59:03.583" Score="1" Body="&lt;p&gt;Compare the .desktop file of mtpaint with another .desktop file of an app that works and see what's missing or what's different.&#xA;You might need to add &lt;code&gt;%U&lt;/code&gt; at the line &lt;code&gt;Exec&lt;/code&gt;, so you will have: &lt;code&gt;Exec=mtpaint %U&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-09-05T11:59:03.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13196" PostTypeId="1" CreationDate="2017-09-05T14:18:33.273" Score="-1" ViewCount="694" Body="&lt;p&gt;How can I add another repositories in Loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to install software-properties-common I get the message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My system version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@B400VC:~# cat /etc/os-release &#xA;NAME=&quot;elementary OS&quot;&#xA;VERSION=&quot;0.4.1 Loki&quot;&#xA;ID=&quot;elementary&quot;&#xA;ID_LIKE=ubuntu&#xA;PRETTY_NAME=&quot;elementary OS 0.4.1 Loki&quot;&#xA;VERSION_ID=&quot;0.4.1&quot;&#xA;HOME_URL=&quot;http://elementary.io/&quot;&#xA;SUPPORT_URL=&quot;http://elementary.io/support/&quot;&#xA;BUG_REPORT_URL=&quot;https://github.com/elementary/&quot;&#xA;VERSION_CODENAME=loki&#xA;UBUNTU_CODENAME=loki&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11993" LastActivityDate="2019-01-03T20:02:35.550" Title="Can't install repositories in Loki" Tags="|release-loki|repositories|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13197" PostTypeId="2" ParentId="13161" CreationDate="2017-09-05T14:23:33.610" Score="1" Body="&lt;p&gt;This is how it works with scan machine from Brother (all-in-one). Maybe you should just replace scan command to print command? And of course need to replace IP adres and name of machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download and install those packages : brscan4, brscan-skey and brother-udev-rule.&#xA;Check if you Brother model is available to configure - run command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;brsaneconfig4 -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you Brother model is on the list after perform previous step, then you can configure it: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;brsaneconfig4 -a name=DCPJ152W model=DCP-J152W ip=192.168.1.102&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Test if your Brother printer is available through the network:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;brsaneconfig4 -p&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If your device is responding, you can go to the next step.&#xA;Finally use tools like XSane or VueScan to scan your docs using Brother scanner.&lt;/p&gt;&#xA;" OwnerUserId="12063" LastActivityDate="2017-09-05T14:23:33.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13198" PostTypeId="2" ParentId="13191" CreationDate="2017-09-05T14:36:08.960" Score="1" Body="&lt;p&gt;You can save as pdf. Print &gt; Print to File actually saves the email as pdf.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/aWFGU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aWFGU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-09-05T14:36:08.960" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13199" PostTypeId="1" CreationDate="2017-09-05T16:18:41.030" Score="0" ViewCount="660" Body="&lt;p&gt;Im using Elementary OS loki and I can not desactivate the single click in pantheon-files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I run this command on my terminal &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo gsettings set org.pantheon.files.preferences single-click false&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and I get the following output&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;No existe el esquema «org.pantheon.files.preferences&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in Tweaks tool I don't have options for files&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eN9rZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eN9rZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In english: Doesn't exist the scheme&lt;/p&gt;&#xA;&#xA;&lt;p&gt;anyone could help me? thanks!&lt;/p&gt;&#xA;" OwnerUserId="7207" LastActivityDate="2017-09-07T15:49:18.487" Title="gsettings doesn't works to desactivate single-click in pantheon-files" Tags="|pantheon-files|click|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13200" PostTypeId="1" CreationDate="2017-09-05T16:21:39.230" Score="0" ViewCount="272" Body="&lt;p&gt;AppCenter's automatic update notification doesn't work anymore for a few days caused by missing file /usr/share/applications/io.elementary.appcenter-daemon.desktop.&lt;/p&gt;&#xA;" OwnerDisplayName="user12064" LastEditorDisplayName="user12064" LastEditDate="2017-09-05T16:34:05.927" LastActivityDate="2024-04-05T11:00:35.083" Title="Update notification" Tags="|release-loki|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13202" PostTypeId="2" ParentId="783" CreationDate="2017-09-05T21:15:02.043" Score="0" Body="&lt;p&gt;I have completed a Chromebook conversion for fun and swapped the HD.  Checkout mrchromebox.tech (Firmware Utility Script) for scripts.  You will need to install SeaBios first then the OS(Have a bootable USB made). Backup your Chrome OS firmware.  The following below is the windows version for reference(swap the windows install with Elementary OS).&#xA; 1. &lt;a href=&quot;https://www.howtogeek.com/278953/how-to-install-windows-on-a-chromebook/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/278953/how-to-install-windows-on-a-chromebook/&lt;/a&gt;&#xA; 2. &lt;a href=&quot;http://www.fascinatingcaptain.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.fascinatingcaptain.com/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12068" LastEditorUserId="12069" LastEditDate="2017-09-08T18:56:35.470" LastActivityDate="2017-09-08T18:56:35.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13203" PostTypeId="2" ParentId="13152" CreationDate="2017-09-05T21:20:32.970" Score="0" Body="&lt;p&gt;The problem was I was editing a copy of the .desktop file on my $HOME dir located at ~/.local/share/applications/.&#xA;Looks like the global one located at /usr/share/applications/ has priority over the personal one. Seems like a bug on pantheon-files to me. The copy at $HOME was created by a GUI menu tool.&#xA;The &lt;code&gt;%U&lt;/code&gt; (or %f ?) at the Exec like is also required. &lt;/p&gt;&#xA;" OwnerUserId="5056" LastActivityDate="2017-09-05T21:20:32.970" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13204" PostTypeId="1" CreationDate="2017-09-05T23:16:30.650" Score="2" ViewCount="743" Body="&lt;p&gt;Recently fluxgui stopped working correctly. The service starts and there is the indicator in the wingpanel, but has no effect. After selecting the color temperature and hitting preview does not change the screen color. Anyone have any idea? Redshift works, but it's unreliable at best and tends to flicker at random times.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-09-10T09:06:53.807" Title="F.Lux Not Working" Tags="|display|color|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13207" PostTypeId="2" ParentId="13199" CreationDate="2017-09-06T07:23:25.810" Score="1" Body="&lt;p&gt;Changing this setting via &lt;code&gt;dconf&lt;/code&gt; works for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ dconf write /org/pantheon/files/preferences/single-click false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you try that?&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-09-06T07:23:25.810" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13208" PostTypeId="1" CreationDate="2017-09-06T13:34:32.213" Score="1" ViewCount="704" Body="&lt;p&gt;I have an internal Mobile Broadband network card on my laptop but the network manager does not pick it up. I only see WIred and Wireless. &lt;/p&gt;&#xA;" OwnerUserId="2628" LastActivityDate="2017-10-08T00:11:04.567" Title="Network manager does not show Mobile Broadband" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13209" PostTypeId="1" AcceptedAnswerId="13242" CreationDate="2017-09-06T15:44:15.740" Score="1" ViewCount="577" Body="&lt;p&gt;Followed instructions on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8660/how-to-play-a-dvd-on-loki&quot;&gt;How to play a DVD on Loki&lt;/a&gt;, but the DVD video would just not play decoded. The sound is ok. But the DVD menus and video content remain encrypted.&lt;/p&gt;&#xA;&lt;h3&gt;Running:&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary OS Loki 0.4.1&lt;/li&gt;&#xA;&lt;li&gt;2006 2,1 MacBook Pro 17&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;VLC to read DVDs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Tried:&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Uninstalling the Videos app&lt;/li&gt;&#xA;&lt;li&gt;Reinstalling &lt;code&gt;libdvd-pkg&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reinstalling &lt;code&gt;vlc&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Rebooting&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The above didn't solve the problem.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="11700" LastEditDate="2021-06-09T20:17:08.520" LastActivityDate="2021-06-09T20:17:08.520" Title="DVD Playback: decoding issue after libdvd-pkg installed" Tags="|vlc|dvd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13210" PostTypeId="1" AcceptedAnswerId="13254" CreationDate="2017-09-06T16:31:54.103" Score="1" ViewCount="59" Body="&lt;p&gt;Had to remove all of the Power settings related to resume (to 'do nothing') on my machine due to suspend not waking machine properly. Screen remains black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: sometimes MacOS SnowLeopard did have the issue that the screen did not wake, but a re-suspend re-wake did solve the matter everytime. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using loki 0.4.1; graphic card is ATI Mobility Radeon X1600 - does it has to do with installing the proprietary drivers?&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2017-09-09T17:21:04.293" Title="How to solve resume from suspend on MBP 2,1 17&quot; 2006" Tags="|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13211" PostTypeId="1" AcceptedAnswerId="13223" CreationDate="2017-09-06T17:29:30.933" Score="0" ViewCount="137" Body="&lt;p&gt;I'm trying to solve the problem on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/376/how-to-type-on-a-macbook-2-1&quot;&gt;How to type @ on a MacBookPro 2.1&lt;/a&gt; but Keyboard in settings doesn't show an Options button like pictured on the screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What workaround is there to this issue? &lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2017-09-10T09:53:21.180" Title="Keyboard custom settings in Loki 0.4.1" Tags="|keyboard|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13212" PostTypeId="1" AcceptedAnswerId="13219" CreationDate="2017-09-06T20:59:59.963" Score="0" ViewCount="356" Body="&lt;p&gt;I have elementaryos-0.4.1-stable.20170814 and made the install disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It stops when trying to install the OS to disk. When I try to run the OS directly from the Live Disk it is able to boot successfully into the OS, but then hangs at the desktop. On the Touch Cover, keyboard, touchpad, and touchscreen input don't respond.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The odd thing is that the touchpad DOES work momentarily right as the OS boots to the desktop, but then stops responding a couple seconds later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="2872" LastActivityDate="2017-09-07T14:02:49.730" Title="Does EOS Loki work on the Surface 3 (non-pro)?" Tags="|release-loki|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13213" PostTypeId="2" ParentId="13204" CreationDate="2017-09-06T22:33:05.453" Score="2" Body="&lt;p&gt;Use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt --purge remove fluxgui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After, delete the files in the folder &lt;code&gt;~/.local/share/fluxgui&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot, and reinstall fluxgui &lt;/p&gt;&#xA;" OwnerUserId="11602" LastEditorUserId="578" LastEditDate="2017-09-10T09:06:53.807" LastActivityDate="2017-09-10T09:06:53.807" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13214" PostTypeId="1" AcceptedAnswerId="13216" CreationDate="2017-09-07T02:36:37.453" Score="1" ViewCount="119" Body="&lt;p&gt;Is there a way to add shred to ElementaryOS content menu? So instead of typing &lt;code&gt;shred -f -v -z -u file.zip&lt;/code&gt; I can just right click the file and delete it.&lt;/p&gt;&#xA;" OwnerUserId="12081" LastActivityDate="2017-09-07T07:28:21.043" Title="Securely Wipe/Shred Files in Pantheon via Right Click menu" Tags="|release-loki|pantheon-files|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13215" PostTypeId="2" ParentId="13142" CreationDate="2017-09-07T06:23:48.097" Score="1" Body="&lt;p&gt;Try right-clicking on the windows title bar and selecting &quot;Always on visible workspace&quot;&lt;/p&gt;&#xA;" OwnerUserId="12083" LastActivityDate="2017-09-07T06:23:48.097" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13216" PostTypeId="2" ParentId="13214" CreationDate="2017-09-07T07:28:21.043" Score="3" Body="&lt;p&gt;This should be possible with a contractor, something like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Shred&#xA;Description=Securely delete a file&#xA;Icon=&#xA;MimeType=!inode/blockdevice;inode/chardevice;inode/fifo;inode/socket;&#xA;Exec=shred -f -z -u %f&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Place this in &lt;code&gt;/usr/share/contractor/shred.contract&lt;/code&gt; and you should then get an entry when you right-click on a file.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-09-07T07:28:21.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13218" PostTypeId="2" ParentId="13200" CreationDate="2017-09-07T13:03:19.693" Score="0" Body="&lt;p&gt;You are correct and I can confirm this issue. However, StackExchange is for asking questions. It would be very helpful for the elementary developers if you raised this as an issue on the &lt;a href=&quot;https://github.com/elementary/appcenter/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppCenter GitHub repository&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your question was how to fix this manually, you can create the &lt;code&gt;/usr/share/applications/io.elementary.appcenter-daemon.desktop&lt;/code&gt; with the &lt;code&gt;Exec&lt;/code&gt; key set to &lt;code&gt;appcenter -s&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-07T13:03:19.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13219" PostTypeId="2" ParentId="13212" CreationDate="2017-09-07T14:02:49.730" Score="1" Body="&lt;p&gt;I don't think so, Microsoft is not so open about their bootloader and drivers, so its already pretty hard to install anything but Windows, but there is an even bigger issue with your config.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You're using a non-pro surface 3, this means you're running an ARM processor, not an x64 processor. Elementary is, sadly, not available for this kind of processors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try any Linux distro that is ARM compatible.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2017-09-07T14:02:49.730" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13220" PostTypeId="2" ParentId="13199" CreationDate="2017-09-07T15:49:18.487" Score="1" Body="&lt;p&gt;If you are using the daily unstable version you should check whether the schema io.elementary.files.preferences.single-click exists, in which case you should change that.  The Tweaks tool is not guaranteed to work with this version.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-09-07T15:49:18.487" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13221" PostTypeId="1" CreationDate="2017-09-07T15:49:27.670" Score="0" ViewCount="156" Body="&lt;p&gt;What is the Root Password.  I have tried the boot to recovery mode and I tried to change the root password and kept getting an authentication error.  This thing did not let me set the root password when I installed it.  I need root to install the Lamp stack and other things.  It's kind of useless unless I can get super user to do various admin functions.  Otherwise I'm just another user and I don't want to be just a user on my own machine.&lt;/p&gt;&#xA;" OwnerUserId="12087" LastActivityDate="2017-09-08T21:09:15.133" Title="Getting Root 0000" Tags="|root|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13223" PostTypeId="2" ParentId="13211" CreationDate="2017-09-07T18:31:40.037" Score="0" Body="&lt;p&gt;In Loki 0.4.1 to enable to type @ on a MacbookPro 2,1 in &lt;em&gt;Keyboard -&gt; Layout -&gt; key to choose 3rd level&lt;/em&gt;'s choices did not include '&lt;em&gt;left alt&lt;/em&gt;', then the issue can be solved attributing it to '&lt;em&gt;caps lock&lt;/em&gt;', providing I'm using the GUI a lot I'm not using 'caps lock' frequently at all, so it's a working choice.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2017-09-07T18:31:40.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13224" PostTypeId="2" ParentId="13018" CreationDate="2017-09-07T20:03:35.957" Score="0" Body="&lt;p&gt;I use a small mSATA SSD 32Gb just for the / and hdd for the /home. System start 20 seconds, poweroff 5 seconds.&lt;/p&gt;&#xA;" OwnerUserId="8697" LastActivityDate="2017-09-07T20:03:35.957" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13225" PostTypeId="2" ParentId="13221" CreationDate="2017-09-07T22:35:31.993" Score="4" Body="&lt;p&gt;The default behavior of Ubuntu based distributions is to lock the root account to encourage the safer behavior of using &lt;code&gt;sudo&lt;/code&gt; on individual commands that need escalated priveleges. That way you're not running as root all the time and it's a little safer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are a number of guides on the internet on how to install a LAMP stack on Ubuntu based distributions &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mysql-php-lamp-stack-on-ubuntu-16-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;like this one&lt;/a&gt;. That should work for elementary too and you don't need to be logged in as root to do it. You just enter &lt;code&gt;sudo&lt;/code&gt; in front of the commands and it prompts you for &lt;strong&gt;your&lt;/strong&gt; user's password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you &lt;strong&gt;really&lt;/strong&gt; still want to log in as root, you can use &lt;code&gt;sudo -i&lt;/code&gt; and enter your password.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2017-09-08T11:08:22.683" LastActivityDate="2017-09-08T11:08:22.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13226" PostTypeId="2" ParentId="13208" CreationDate="2017-09-07T22:42:52.083" Score="1" Body="&lt;p&gt;There is currently &lt;a href=&quot;https://github.com/elementary/switchboard-plug-networking/issues/2&quot; rel=&quot;nofollow noreferrer&quot;&gt;an open issue&lt;/a&gt; on GitHub about this and I have just recently got a Mobile Broadband device to do some development and testing so I can hopefully get this feature implemented.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, in the mean time, you may still be able to configure your card by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Settings -&amp;gt; Network -&amp;gt; Edit Connections (at the bottom) -&amp;gt; Add -&amp;gt; Mobile Broadband&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your device has been detected and has drivers, you should be able to configure it following those menus.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-07T22:42:52.083" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13227" PostTypeId="2" ParentId="13085" CreationDate="2017-09-07T23:16:23.407" Score="4" Body="&lt;p&gt;Please beware of building new kernels as if you don't get all the correct options for your hardware, your computer could stop booting. Though it should be possible to recover. The latest version of elementary now ships with kernal 4.10, so see if that meets your needs before building another.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you still want to continue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;apt-get source&lt;/code&gt; command will be failing because the Ubuntu source repositories are disabled in elementary OS. This reduces the network traffic needed when performing updates and does not affect 99% of users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you wish to re-enable those repositories, open &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and remove the &lt;code&gt;#&lt;/code&gt; symbol from the deb-src lines. You should only need to remove it from the two lines near the top of the file that end with &lt;code&gt;xenial main restricted&lt;/code&gt; and &lt;code&gt;xenial-updates main restricted&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have done this, run &lt;code&gt;sudo apt update&lt;/code&gt; and then the &lt;code&gt;apt-get source&lt;/code&gt; commands should work as expected.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-07T23:16:23.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13228" PostTypeId="1" CreationDate="2017-09-08T05:43:55.200" Score="0" ViewCount="131" Body="&lt;p&gt;I'm trying to get the default Calendar-App to work with my University Google calendar account. It requires an external Oauth login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to at least get read-only with ICal and I got Permission Denied.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="5230" LastActivityDate="2024-03-28T10:01:45.163" Title="Getting default Calendar app to work with University account (outside auth)" Tags="|calendar|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13229" PostTypeId="1" AcceptedAnswerId="13230" CreationDate="2017-09-08T08:44:40.590" Score="3" ViewCount="6050" Body="&lt;p&gt;I want to install Brave brower on Elementary OS, it is not present in the App Center or the official repos. I googled but I could not find something simple that I as a linux beginner (Noob) could understand and do. Is there a simple way to do it?something similar to sudo apt-get install Brave .&lt;/p&gt;&#xA;" OwnerUserId="12093" LastActivityDate="2017-09-08T09:06:42.333" Title="How to install Brave Browser on Elementry OS?" Tags="|repositories|web-browser|internet-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13230" PostTypeId="2" ParentId="13229" CreationDate="2017-09-08T09:06:42.333" Score="1" Body="&lt;p&gt;According to the official docs of the Brave browser you can install it via  apt-get after adding the repository to your sources list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://s3-us-west-2.amazonaws.com/brave-apt/keys.asc | sudo apt-key add -&#xA;echo &quot;deb [arch=amd64] https://s3-us-west-2.amazonaws.com/brave-apt `lsb_release -sc` main&quot; | sudo tee -a /etc/apt/sources.list.d/brave-`lsb_release -sc`.list&#xA;&#xA;sudo apt update&#xA;sudo apt install brave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info: &lt;a href=&quot;https://github.com/brave/browser-laptop/blob/master/docs/linuxInstall.md#debian-jessie-and-ubuntu-artful-zesty-yakkety-xenial-and-trusty-amd64&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3598" LastActivityDate="2017-09-08T09:06:42.333" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13232" PostTypeId="2" ParentId="12226" CreationDate="2017-09-08T14:23:45.023" Score="0" Body="&lt;p&gt;You need to add &lt;code&gt;QT_STYLE_OVERRIDE=gtk2&lt;/code&gt; before the &lt;code&gt;draftsight&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="578" LastEditDate="2017-09-10T09:02:53.650" LastActivityDate="2017-09-10T09:02:53.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13235" PostTypeId="2" ParentId="7542" CreationDate="2017-09-08T17:38:20.203" Score="10" Body="&lt;p&gt;One easy way to install Debian files easily is to install Eddy. Run this command to install it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install eddy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As Seth noted out in the comments, the previous does not work in Elementary OS 5.0 Juno. Try this instead:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install com.github.donadigo.eddy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install a Debian package with Eddy first you open it and it will show this page:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XqBE0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XqBE0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you downloaded the Debian package into your Downloads folder, you can click the &quot;Load from Download&quot; option. It will then show the screen below. Then you can click install on whatever package you need to. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7ThHZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7ThHZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, you can select the &quot;Open&quot; button. It will show the file manager and you can choose what file you want to install. &lt;/p&gt;&#xA;" OwnerUserId="12098" LastEditorUserId="12098" LastEditDate="2019-05-09T17:07:36.107" LastActivityDate="2019-05-09T17:07:36.107" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="13236" PostTypeId="1" CreationDate="2017-09-08T18:27:33.017" Score="1" ViewCount="88" Body="&lt;p&gt;I've made the full migration to Linux recently by installing EOS on my main(and only) rig but I've recently noticed it takes about a minute and 48 seconds after timing it once I log in for the dock and panel to show up. I ran dmesg | grep error and got this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[   13.176596] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro&#xA;[   13.855271] bluetooth hci0: Direct firmware load for brcm/BCM.hcd failed with error -2&lt;/p&gt;&#xA;" OwnerUserId="12102" LastActivityDate="2017-10-09T03:24:48.667" Title="Slow boot after logging in (1m 48s)" Tags="|boot|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13237" PostTypeId="1" CreationDate="2017-09-08T18:34:02.777" Score="1" ViewCount="274" Body="&lt;p&gt;My laptop (Dell XPS 13) started shutting itself off every time I closed the lid. At first, I thought that maybe something was changed in my power settings but lo and behold, it's set to suspend when the lid is closed.&#xA;I just pressing suspend in the power drop menu from the top bar and the same thing happened, the laptop simply shut itself off.&#xA;Can someone help me out with this? I'm using Elementary OS Loki, fully updated and everything.&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2018-06-05T09:52:47.913" Title="Suspend shuts down my laptop" Tags="|release-loki|suspend|shutdown|power|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13238" PostTypeId="2" ParentId="13221" CreationDate="2017-09-08T21:09:15.133" Score="0" Body="&lt;p&gt;never really used the above command &quot;sudo -i&quot; ... what I always do when needing root for a series of commands (because I am lazy and don't want to type sudo all the time) is just &quot;sudo su -&quot; ... sounds like it does the same as the above&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-09-08T21:09:15.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13240" PostTypeId="2" ParentId="13236" CreationDate="2017-09-08T21:20:34.987" Score="1" Body="&lt;p&gt;Try running these commands&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get full-upgrade&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Let the system upgrade everything and then reboot the system. This was addressed recently and is a known bluetooth bug.&lt;/p&gt;&#xA;&lt;p&gt;source: &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-august-4a6d183364b4&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/loki-updates-for-august-4a6d183364b4&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;for reference, my computer takes about 40 seconds to load.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-08T21:30:27.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13241" PostTypeId="2" ParentId="13085" CreationDate="2017-09-08T21:38:13.253" Score="2" Body="&lt;p&gt;Try using the Ubuntu Kernel Update Utility; UKUU.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install software-properties-common&lt;/p&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:teejee2008/ppa&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install ukuu&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;That should open a list of kernels you can install. Don't update past 4.11.12&lt;/p&gt;&#xA;&lt;p&gt;4.11.12-041112-generic x86_64&lt;/p&gt;&#xA;&lt;p&gt;You will need to install the kernel, the reboot the computer, then install again (the first attempt never works), then reboot and your new kernel should load.&lt;/p&gt;&#xA;&lt;p&gt;There is no support for several programs you go past 4.11.12-041112-generic x86_64. For example GCC and VMware will not work. Do not update past this kernel, this prevents little nuisances as that. Being bleeding edge is rarely necessary.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-08T21:38:13.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13242" PostTypeId="2" ParentId="13209" CreationDate="2017-09-08T21:43:02.390" Score="0" Body="&lt;p&gt;This answer will likely not help, but it is worth a shot.&lt;/p&gt;&#xA;&lt;p&gt;To make movies and music work on Ubuntu run these commands.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install ubuntu-restricted-extras libdvd-pkg&lt;/p&gt;&#xA;&lt;p&gt;sudo dpkg-reconfigure libdvd-pkg&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;After that, since VLC is not working, try totem.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install totem&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;reboot the computer, just for good measure, then try to open and play your DVD.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-08T21:43:02.390" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13243" PostTypeId="2" ParentId="13196" CreationDate="2017-09-08T21:45:42.097" Score="0" Body="&lt;p&gt;I have gotten this before.&lt;/p&gt;&#xA;&lt;p&gt;You cannot install software-properties-common until you have first run an update&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install software-properties-common&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;That should do it.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-08T21:45:42.097" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13244" PostTypeId="2" ParentId="13193" CreationDate="2017-09-08T21:48:51.053" Score="-1" Body="&lt;p&gt;Edit: David Hewitt is correct in his comment;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;This issue was nothing to do with appstream and appstream doesn't&#xA;control the language in which applications are displayed either. This&#xA;answer is more likely to cause issues in the future when later&#xA;versions of appcenter come along that depend on the fixes in the&#xA;version of appstream that elementary ships&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I am leaving this answer for the odd time it may help. Use this fix with the above information in mind.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;The updated Elementary appstream is sometimes weird. I ended up putting a hold on mine and it solved some quirks.&lt;/p&gt;&#xA;&lt;p&gt;Try to install the Ubuntu appstream then hold it from updating.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt policy appstream&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install appstream=(ubuntu version)&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-mark hold appstream&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;That fixed it for me.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-11-15T21:18:08.403" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13245" PostTypeId="1" CreationDate="2017-09-09T01:03:35.317" Score="0" ViewCount="262" Body="&lt;p&gt;So I decided to screw around with operating systems I I downloaded this. I'm a complete noob so my question is:&#xA;I can't turn the wifi on.&#xA;I googled this about 20 times and none worked.&#xA;So, can someone help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit : it was the switch. I had to press fn + f12&lt;/p&gt;&#xA;" OwnerUserId="12105" LastEditorUserId="6398" LastEditDate="2017-09-18T06:01:29.067" LastActivityDate="2017-09-18T06:01:29.067" Title="Wifi won't show up [Solved]" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13246" PostTypeId="1" CreationDate="2017-09-09T02:48:57.773" Score="0" ViewCount="5333" Body="&lt;p&gt;I have a freshly installed system, and i've not been able install any third party software or packages via the terminal or software center. Please help me out&lt;a href=&quot;https://i.stack.imgur.com/N6DDy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/N6DDy.png&quot; alt=&quot;This is what happens when i try to install anything, or even update&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s9L8c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s9L8c.png&quot; alt=&quot;This is another similar scene&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12097" LastActivityDate="2022-07-24T20:50:36.297" Title="How to install gdebi?" Tags="|pantheon-terminal|package-management|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13248" PostTypeId="2" ParentId="13246" CreationDate="2017-09-09T10:17:50.623" Score="4" Body="&lt;p&gt;You dont need 'gdebi' anymore...just open Appcenter and install &lt;a href=&quot;https://github.com/donadigo/eddy&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2017-09-09T10:17:50.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13249" PostTypeId="2" ParentId="13246" CreationDate="2017-09-09T10:27:00.383" Score="1" Body="&lt;p&gt;Looking at your error list in screen 1, it seems as if you have a DNS failure - perhaps check that you can reach, say apple.com, with Epiphany, and go from there.&#xA;HTH&lt;/p&gt;&#xA;" OwnerUserId="12096" LastActivityDate="2017-09-09T10:27:00.383" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13252" PostTypeId="2" ParentId="13246" CreationDate="2017-09-09T14:31:15.527" Score="2" Body="&lt;p&gt;Try these commands out.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install software-properties-common&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install gdebi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Those will let you install third party applications and repositories in the terminal.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-24T21:52:44.540" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13253" PostTypeId="2" ParentId="13073" CreationDate="2017-09-09T14:51:02.610" Score="0" Body="&lt;p&gt;Here is a fresh set of sources with only a few repositories installed, but they won't affect anything as they just update some programs to their new stable build.  I will add a link to the download as a comment incase it gets caught in the spam filter.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastActivityDate="2017-09-09T14:51:02.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13254" PostTypeId="2" ParentId="13210" CreationDate="2017-09-09T17:21:04.293" Score="1" Body="&lt;p&gt;The issue is now solved: first I followed these two tutorials:&#xA;1. &lt;a href=&quot;https://adam.merrifield.ca/2015/11/25/improving-power-management-in-eos-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Improving Power management in EOS Freya&lt;/a&gt; (though using Loki 0.4.1)&#xA;2. &lt;a href=&quot;https://itsfoss.com/reduce-overheating-laptops-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Most Effective Ways to Reduce Laptop Overheating in Linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I had a system update (drivers and intel chip) and since then resume from Suspend is going rather smoothly, and also lid close to Suspend goes fine too now.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2017-09-09T17:21:04.293" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13258" PostTypeId="2" ParentId="13211" CreationDate="2017-09-10T09:53:21.180" Score="0" Body="&lt;p&gt;It should be possible to put it on Left-Alt like this:&#xA;open terminal and put:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;An setup starts with a Keyboard-configuration, the 4th screen is the 3rd-level option for me, I was able to choose left Alt here (not on a Macbook)&#xA;Finish the setup than put:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;service keyboard-setup restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And it should work!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: Sometimes this change isn't permanent (gone at restart), write back if that's the case.&lt;/p&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-09-10T09:53:21.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13259" PostTypeId="2" ParentId="11147" CreationDate="2017-09-10T14:27:57.413" Score="0" Body="&lt;p&gt;I am so sorry, I have a Z 97 A motherboard. I do not know what I was thinking or how I wrote the above. My apologies. &lt;/p&gt;&#xA;" OwnerUserId="3914" LastActivityDate="2017-09-10T14:27:57.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13261" PostTypeId="1" AcceptedAnswerId="13269" CreationDate="2017-09-11T01:16:49.800" Score="5" ViewCount="757" Body="&lt;p&gt;I cant figure this out for the life of me, but it seems impossible to save an image using any browser. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am very very new to linux, but I will try to provide any sort of helpful information I can. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what I see when I try an save an image to any file folder:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1txbh.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1txbh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no save button, as far as I can tell, and the only thing I can do is hit escape to get out of the save feature. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be great!&lt;/p&gt;&#xA;" OwnerUserId="12113" LastActivityDate="2017-09-13T17:23:15.617" Title="Can't save images in any browser" Tags="|chromium|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13264" PostTypeId="2" ParentId="13245" CreationDate="2017-09-11T11:42:24.603" Score="1" Body="&lt;p&gt;Can you provide a screenshot with what you see?&#xA;Normally you have in the upper right an icon for WiFi, clicking that one gives you the option to turn on/off the WiFi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's also possible to go to system settings -&gt; network&lt;/p&gt;&#xA;" OwnerUserId="11942" LastActivityDate="2017-09-11T11:42:24.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13269" PostTypeId="2" ParentId="13261" CreationDate="2017-09-11T13:43:38.920" Score="5" Body="&lt;p&gt;Try changing your theme to default and restart. This happened to me when messing around with a theme. (Btw: which theme is that?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(from this question: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1638/buttons-are-missing-in-the-file-chooser-dialog-what-should-i-do&quot;&gt;Buttons are missing in the file chooser dialog. What should I do?&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-09-12T08:30:01.173" LastActivityDate="2017-09-12T08:30:01.173" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13271" PostTypeId="2" ParentId="12386" CreationDate="2017-09-11T14:36:33.407" Score="0" Body="&lt;p&gt;Install It using : &lt;br&gt;&#xA;&lt;code&gt;~$ sudo apt-get install flashplugin-installer&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12119" LastActivityDate="2017-09-11T14:36:33.407" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13272" PostTypeId="1" AcceptedAnswerId="13277" CreationDate="2017-09-11T14:54:14.460" Score="2" ViewCount="322" Body="&lt;p&gt;Is it possible to connect to ssh server using pantheon-files with public key or .pem file, i really need this integration.&#xA;The GUI now only show server, surname and password field i cant see a way to select a ssh key&lt;/p&gt;&#xA;" OwnerUserId="8524" LastActivityDate="2020-03-06T14:04:08.817" Title="PublicKey/Pem file Authentication for SSH in Pantheon Files" Tags="|pantheon-files|ssh|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13274" PostTypeId="1" CreationDate="2017-09-11T16:08:48.047" Score="0" ViewCount="363" Body="&lt;p&gt;The Sounds Panel in the System Settings does not show any of my speakers. Also, using the GUI to adjust the volume does not work at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the speakers work and applications can actually play audio. Trying to adjust the volume through &lt;code&gt;alsamixer&lt;/code&gt; works, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is what details I have about my audio device using &lt;code&gt;lspci&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12121" LastActivityDate="2017-09-11T16:17:30.160" Title="Elementary Loki GUI Volume Reduce is not working" Tags="|release-loki|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13275" PostTypeId="2" ParentId="13274" CreationDate="2017-09-11T16:17:30.160" Score="1" Body="&lt;p&gt;Reinstalling &lt;code&gt;alsa-base&lt;/code&gt; and &lt;code&gt;pulseaudio&lt;/code&gt; did the trick for me.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge alsa-base pulseaudio&#xA;&#xA;sudo apt-get install alsa-base pulseaudio &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, if necessary:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo alsa force-reload&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;reboot&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12121" LastActivityDate="2017-09-11T16:17:30.160" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13276" PostTypeId="1" CreationDate="2017-09-12T06:02:27.067" Score="0" ViewCount="567" Body="&lt;p&gt;I am aware of plank --preferences, plank tweeks (with different themes, but I love original one) and the settings file within a .config/ directory. However I would like to change shadow intensity/opacity under a current application icon or/and change blue circle under this icon to light green and so forth. Is there a separate .css file or something else to do to accomplish more precise customization?&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-09-12T08:23:17.693" Title="detailed customization of a plank" Tags="|release-freya|settings|plank|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13277" PostTypeId="2" ParentId="13272" CreationDate="2017-09-12T08:14:32.800" Score="2" Body="&lt;p&gt;You should submit an &quot;wishlist&quot; issue on Github about this ( at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;). This is not something that is currently implemented within Files.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-09-12T08:14:32.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13278" PostTypeId="2" ParentId="13276" CreationDate="2017-09-12T08:23:17.693" Score="1" Body="&lt;p&gt;&lt;code&gt;cd ~/.local/share/plank/themes or cd /usr/share/plank/themes&lt;/code&gt;&#xA;List sub folders of a themes folder by &lt;code&gt;ls&lt;/code&gt; command and pick a sub folder you are interesting in (for example: Pantheon, ElementaryPantheon, Moka etc.) by performing &lt;code&gt;cd FolderName&lt;/code&gt;.&#xA;Open &lt;strong&gt;dock.theme&lt;/strong&gt; file in your favorite text editor via &lt;code&gt;sudo&lt;/code&gt;. Explore thoroughly all options that are available — play around, change and save it. You will see the result immediately &lt;strong&gt;without&lt;/strong&gt; killing plank (&lt;code&gt;killall plank&lt;/code&gt;). &lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2017-09-12T08:23:17.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13279" PostTypeId="1" CreationDate="2017-09-12T11:40:54.277" Score="0" ViewCount="823" Body="&lt;p&gt;Let's make it quick. I have bought myself an old Dell Optiplex 780 with the following specs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Core 2 duo E7300&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-4Gb Ram ddr2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make it slightly &quot;spicier&quot;(playing on the league we're playing), I have thrown in the following components.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Samsung 850evo 250Gb (used)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Radeon HD4550 512mb ddr3 (display port, dvi)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-(On its way) Core 2 duo e8400, 5 bucks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And , of course, Elementary OS freshly installed which make the old bastard run as if it were on fire.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here is mi issue. Can't get audio from the radeon card. Sound on system settings does not give me any additional options to choose from. I got into alsa mixer and enabled every single option. Nothing happened. I also added my user to the audio group(thing seems to have worked for some people). Nothing happened. Tried to download amdgpu pro but OS is not compatible and I'm not even sure this card would support the program.I have tried to check if there were any drivers for the audio chip (mobo), but only for windows.&#xA;The thing is, I have reached my personal wall and can't find any solution to this issue, not even googling up as good as i can. If you had any solution or want me to try anything, please let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="12127" LastActivityDate="2023-12-13T02:00:25.103" Title="No sound on PC, Hardware or Elementary?" Tags="|graphic-drivers|sound|drivers|audio|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13280" PostTypeId="1" CreationDate="2017-09-12T13:22:54.373" Score="0" ViewCount="763" Body="&lt;p&gt;I have an XPS 13 which has a 3200*1800 resolution hooked up to an external monitor that only goes up to 1920*1080. How do I make it so that when I place windows on my external monitor that they are not huge and so that they are properly scaled to its resolution size? It was working on a fresh install but something happened and it doesn't fit right anymore. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="12128" LastActivityDate="2023-12-13T03:08:36.073" Title="How to set scaling on external monitor?" Tags="|release-loki|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13281" PostTypeId="1" CreationDate="2017-09-12T16:53:33.377" Score="0" ViewCount="243" Body="&lt;p&gt;OK, I apologise in advance for this stupid sounding question but I'm a bit of a dinosaur and I'm in a stoopid situation. That is, my regular laptop which boots with Freya has collapsed in a heap and a friend has lent me an ancient Dell Inspiron 8200 which has Knoppix 7.1 on it. In German. I have the USB stick with Freya on it that I originally used to install Freya on the broken HP laptop. I can't remember the version, but 14 something comes to mind. What I want to do is boot the Dell from the USB, delete Knoppix and install Freya. However, I can't figure out how to boot from the USB stick and everything in Knoppix is in German and I don't speak enough German to figure out what I'm doing. I don't have any admin privileges in knoppix and don't know the password. Can anyone tell me what I can do under those circumstances to boot from Freya on the USB stick? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10508" LastEditorUserId="10508" LastEditDate="2017-09-12T17:37:09.707" LastActivityDate="2017-09-12T22:40:49.980" Title="Booting elementary OS from USB stick on old Dell Inspiron 8200 with Knoppix in German" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13282" PostTypeId="2" ParentId="12716" CreationDate="2017-09-12T17:15:41.980" Score="2" Body="&lt;p&gt;In short - any 64bit board that's supported by Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2017-09-12T17:15:41.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13283" PostTypeId="1" CreationDate="2017-09-12T17:16:13.030" Score="0" ViewCount="216" Body="&lt;p&gt;I've installed the latest version of the Arduino IDE (1.8.4) following the instructions on the Adafruit website here:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://learn.adafruit.com/adafruit-arduino-ide-setup/linux-setup&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://learn.adafruit.com/adafruit-arduino-ide-setup/linux-setup&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I connect my Pro Trinket board, but the &lt;strong&gt;Port&lt;/strong&gt; menu is disabled, so I am unable to communicate and download a sketch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried to run Arduino as root with gksudo, but I get the error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;(gksudo:6222): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Suggestions?&lt;/p&gt;&#xA;" OwnerUserId="6422" LastEditorUserId="6422" LastEditDate="2017-09-12T19:48:54.110" LastActivityDate="2017-11-12T17:30:20.273" Title="Allow Adruino IDE access to USB ports?" Tags="|release-loki|usb|permissions|ide|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13284" PostTypeId="2" ParentId="13280" CreationDate="2017-09-12T17:26:49.133" Score="0" Body="&lt;p&gt;try setting your laptop display to 1600 x 900 resolution.&#xA;Unfortunately, the current Linux desktop supports only one scale factor for the entire desktop, so either you scale down your HiDPI monitor, or you get double size on your external. For more info check out these blog posts:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://medium.com/elementaryos/what-is-hidpi-and-why-does-it-matter-b024eabea20d&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/what-is-hidpi-and-why-does-it-matter-b024eabea20d&lt;/a&gt;&#xA;  &lt;a href=&quot;https://medium.com/elementaryos/top-3-misconceptions-about-hidpi-f5ef493d7bf8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/top-3-misconceptions-about-hidpi-f5ef493d7bf8&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="6422" LastActivityDate="2017-09-12T17:26:49.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13285" PostTypeId="2" ParentId="13279" CreationDate="2017-09-12T19:34:48.493" Score="0" Body="&lt;p&gt;Okay.&lt;/p&gt;&#xA;&lt;p&gt;1.) This was also a problem on Windows with these cards. I had a Radeon HD5750 and ran into this way back when. Eventually AMD fixed it in their drivers.&lt;/p&gt;&#xA;&lt;p&gt;2.) I have no idea if that fix made its way to Linux or if it was a problem then.&lt;/p&gt;&#xA;&lt;p&gt;3.) I have a potential fix, but I no longer have my card to test the HDMI audio out of and confirm it with you.&lt;/p&gt;&#xA;&lt;p&gt;Give this bad boy whirl:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install software-properties-common&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get upgrade&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;This updates the video drivers.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-12T19:34:48.493" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13286" PostTypeId="1" CreationDate="2017-09-12T19:47:07.583" Score="0" ViewCount="629" Body="&lt;p&gt;So whenever an application is used, plank will change it's background to highlight it. Is there a way i can disable that? For an example when i start firefox there is that orange &quot;shadow&quot; behind it.&lt;/p&gt;&#xA;" OwnerUserId="12130" LastActivityDate="2017-09-15T15:12:06.123" Title="Disable Plank icon background" Tags="|plank|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13287" PostTypeId="2" ParentId="10186" CreationDate="2017-09-12T19:47:10.323" Score="1" Body="&lt;p&gt;Unfortunately, the current Linux desktop supports only one scale factor for the entire desktop, so either you scale down your HiDPI monitor, or you get double size on your external.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a very similar setup and the simple work-around I use now is to set the laptop display to 1280 x 720 in &lt;strong&gt;System Settings &gt; Displays&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more info check out these blog posts:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;https://medium.com/elementaryos/what-is-hidpi-and-why-does-it-matter-b024eabea20d&#xA;https://medium.com/elementaryos/top-3-misconceptions-about-hidpi-f5ef493d7bf8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6422" LastActivityDate="2017-09-12T19:47:10.323" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13288" PostTypeId="2" ParentId="13281" CreationDate="2017-09-12T22:40:49.980" Score="1" Body="&lt;p&gt;The 8200 does not have usb 2.0, and does not support booting from usb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://en.community.dell.com/support-forums/desktop/f/3514/p/19337400/19715801.aspx#19715801&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://en.community.dell.com/support-forums/desktop/f/3514/p/19337400/19715801.aspx#19715801&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your best option will be to burn Freya to a cd rom.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://superuser.com/questions/629785/old-dell-dimension-8200-running-windows-xp&quot;&gt;https://superuser.com/questions/629785/old-dell-dimension-8200-running-windows-xp&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then:&#xA;you can change the boot sequence in the bios, but the f12 boot menu is much easier. Press f12 on the dell logo, it should give the option to boot normally, from floppy, or from CD/DVD. Just put in the Freya DVD, choose to boot from DVD, and then watch the screen for the &quot;press any key to boot from CD/DVD&quot; message, as soon as you see it, press any key on the keyboard and it should boot to the DVD for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.experts-exchange.com/questions/21454889/I-have-a-DELL-Inspiron-8200-and-want-to-re-install-but-i-cant-boot-from-CD.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.experts-exchange.com/questions/21454889/I-have-a-DELL-Inspiron-8200-and-want-to-re-install-but-i-cant-boot-from-CD.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally try a live session to check everything works fine and proceed to install as the only system in your computer. You can let the system choose the partitions by default which is fine.&lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-09-12T22:40:49.980" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13289" PostTypeId="2" ParentId="13139" CreationDate="2017-09-13T04:37:18.253" Score="1" Body="&lt;p&gt;In order to solve nvidia problem during boot you can add &lt;code&gt;nouveau.modeset=0&lt;/code&gt; before &lt;code&gt;quiet splash&lt;/code&gt;. This way you can install the os and do the same to first boot and install propriety nvidia drivers.&lt;/p&gt;&#xA;" OwnerUserId="6712" LastActivityDate="2017-09-13T04:37:18.253" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13290" PostTypeId="1" CreationDate="2017-09-13T06:32:01.880" Score="1" ViewCount="803" Body="&lt;p&gt;I'm very inexperienced with Linux, so I'll try to explain what I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I allowed elementary OS to install flatpak by typing this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I installed Flatpak (which is apparently useful to install retroarch):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:alexlarsson/flatpak&#xA;sudo apt update&#xA;sudo apt install flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I installed retroarch with the command provided on their website:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install --user flathub org.libretro.RetroArch&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After receiving the packets, I've been searching everywhere and there are no files named retroarch, libretro or flatpak on my computer so I'm lost.&lt;/p&gt;&#xA;" OwnerUserId="8475" LastEditorUserId="84" LastEditDate="2018-05-06T17:52:41.630" LastActivityDate="2018-05-06T17:52:41.630" Title="Retroarch not showing after installing using Flatpak on Elementary OS" Tags="|software-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="13291" PostTypeId="2" ParentId="3949" CreationDate="2017-09-13T12:55:54.197" Score="0" Body="&lt;p&gt;similar script for install or update(auto) jetbrains products like phpstorm, webstorm, IntelliJ Idea and other. + dependencies + non latin hotkeys fixes&#xA;&lt;a href=&quot;https://gist.github.com/zabidok/8418c4f679741f585ac9ce90b16fb8a5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/zabidok/8418c4f679741f585ac9ce90b16fb8a5&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12134" LastActivityDate="2017-09-13T12:55:54.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13292" PostTypeId="2" ParentId="13283" CreationDate="2017-09-13T15:40:14.727" Score="1" Body="&lt;p&gt;I did more research and discovered that the Adafruit boards like the Trinket, Pro Trinket, Gemma, etc. do not show up in the serial port menu when connected via USB. You select the proper board, set the &lt;strong&gt;Programmer&lt;/strong&gt; option to &quot;USBtinyISP&quot; then press the reset button on the board to enter bootloader mode and upload the sketch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The older tutorials Adafruit and Arduino websites all mention selecting the connected board from the &lt;strong&gt;Port&lt;/strong&gt; menu. This is still true for boards with USB chips like the UNO. I was way over thinking this. Sometimes the answer is so simple it seems it can't be correct.&lt;/p&gt;&#xA;" OwnerUserId="6422" LastActivityDate="2017-09-13T15:40:14.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13294" PostTypeId="2" ParentId="478" CreationDate="2017-09-13T17:30:31.600" Score="0" Body="&lt;p&gt;Try xbacklight.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Its simple to control the screen brightness according to your needs through TUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Syntax is simple:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xbacklight n&lt;/p&gt;&#xA;&#xA;&lt;p&gt;where n is the percentage with which you want to increase or decrease the screen brightness.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thus,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xbacklight -3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;decreases the screen brightness by 3%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and similarly,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xbacklight +3   # Do not omit the + sign…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;increases the screen brightness by 3%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another way could be:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;echo 600 &gt; /sys/class/backlight/*backlight/backlight&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change 600 with the brightness level you want. Higher number means more brightness.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run this as a super user or alternatively, do &lt;/p&gt;&#xA;&#xA;&lt;p&gt;chmod 665 /sys/class/backlight/*_backlight/backlight&lt;/p&gt;&#xA;&#xA;&lt;p&gt;first and then run the above command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope you found it useful.&lt;/p&gt;&#xA;" OwnerDisplayName="user12138" LastEditorDisplayName="user12138" LastEditDate="2017-11-02T18:58:56.643" LastActivityDate="2017-11-02T18:58:56.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13295" PostTypeId="2" ParentId="981" CreationDate="2017-09-13T17:50:28.770" Score="0" Body="&lt;p&gt;Well, the above mentioned shortcuts are the standard ones you would find in most of the terminals. As a side node, I would like to say that you can actually customize these and set shortcuts you might prefer fr your system by tweaking the config file for your terminal or by using the GUI by chamging the preferences for your terminal.&lt;/p&gt;&#xA;" OwnerDisplayName="user12138" LastActivityDate="2017-09-13T17:50:28.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13297" PostTypeId="2" ParentId="12848" CreationDate="2017-09-13T22:32:06.720" Score="-1" Body="&lt;p&gt;you have to delete the synaptic conf files in the /usr/share/X11 directory then reboot. update switched to libinput so the synaptic files are unneeded/hindering it.&lt;/p&gt;&#xA;" OwnerUserId="12139" LastActivityDate="2017-09-13T22:32:06.720" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13299" PostTypeId="1" CreationDate="2017-09-14T03:09:10.010" Score="0" ViewCount="97" Body="&lt;p&gt;Would the OS be able to support installation and use of MySQL anytime soon? Apt package manager stated it wasn't supported.&lt;/p&gt;&#xA;" OwnerUserId="12128" LastActivityDate="2017-09-14T03:35:24.150" Title="Possible to add support for MySQL?" Tags="|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13300" PostTypeId="2" ParentId="13299" CreationDate="2017-09-14T03:35:24.150" Score="1" Body="&lt;p&gt;The question is a bit vague, but &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-mysql-on-ubuntu-16-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to install MySQL on Ubuntu 16.04&lt;/a&gt; will take you through the steps, just make sure to update (&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;) your system before installing mysql.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also recomend MySQL Workbench, it just makes your life easier...&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YwtTR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YwtTR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2017-09-14T03:35:24.150" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13301" PostTypeId="1" AcceptedAnswerId="13312" CreationDate="2017-09-14T06:09:39.810" Score="0" ViewCount="81" Body="&lt;p&gt;When I press:&#xA;Network (top panel) -&gt; &quot;Network settings&quot;&#xA;then, it opens &quot;System Settings&quot; instead of &quot;Network settings&quot;.&#xA;Same thing was with &quot;Date &amp;amp; Time Settings...&quot;, but now works properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what kind of magic should I do to fix it? Can you help me, please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="10318" LastEditorUserId="12148" LastEditDate="2017-09-16T15:41:55.567" LastActivityDate="2017-09-16T15:41:55.567" Title="Wrong links on wingpanel for network settings [solved]" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13304" PostTypeId="2" ParentId="1441" CreationDate="2017-09-14T15:38:18.540" Score="4" Body="&lt;p&gt;For anyone who landed here only interested in switching between windows of the same application, I wrote a python script to achieve this. Gist available here: &lt;a href=&quot;https://gist.github.com/tysonholub/c737d562614aa0d83add66dbec378723&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/tysonholub/c737d562614aa0d83add66dbec378723&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please see comments in the code for usage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: This script also allows overriding the native switch-windows behavior through a custom key binding as I've found going forward/backward (Alt+Tab/Alt+Shift+Tab) to be counter-intuitive and unlike most operating systems.&lt;/p&gt;&#xA;" OwnerUserId="12146" LastEditorUserId="12146" LastEditDate="2017-09-14T17:12:16.573" LastActivityDate="2017-09-14T17:12:16.573" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13307" PostTypeId="1" CreationDate="2017-09-15T04:36:47.280" Score="0" ViewCount="400" Body="&lt;p&gt;On elementary OS Loki, if I mount my external hard disk and eject the hard disk, the external hard disk continues spinning. And if I shutdown the computer it takes a long time. Is this a bug?&lt;/p&gt;&#xA;" OwnerUserId="12152" LastEditorUserId="84" LastEditDate="2018-05-06T17:43:50.940" LastActivityDate="2023-12-09T23:05:55.747" Title="Cannot eject external harddrive" Tags="|release-loki|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13310" PostTypeId="2" ParentId="13286" CreationDate="2017-09-15T15:12:06.123" Score="1" Body="&lt;p&gt;There appears to be no way to change the icon highlighting from within the Plank Settings or the dock.theme file itself. This could be something that is hard-coded and unchangeable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I would recommend copying one of the theme folders and playing around with the configuration in the dock.theme file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to find your themes here... ~/.local/share/plank/themes&#xA;or in your /usr/share/plank/themes directory. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-09-15T15:12:06.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13311" PostTypeId="2" ParentId="9343" CreationDate="2017-09-15T15:43:00.583" Score="1" Body="&lt;p&gt;There was a version of the indicator released on the 11th September 2017 that should resolve this issue. Connected networks are prioritized above disconnected networks when choosing which network to use as the status icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a screenshot of the indicator on my laptop today displaying some vboxnet interfaces, but still using the WiFi status as the icon on the panel:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rZcF9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rZcF9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also just submitted &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network/pull/48&quot; rel=&quot;nofollow noreferrer&quot;&gt;a pull request&lt;/a&gt; on GitHub to remove the display of the vboxnet interfaces from the indicator entirely as there is no point in having them displayed in there.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-15T15:43:00.583" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13312" PostTypeId="2" ParentId="13301" CreationDate="2017-09-15T16:39:29.873" Score="0" Body="&lt;p&gt;There is a new release of the network settings plug that came out today (Sep 15th 2017) that should resolve this issue.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-15T16:39:29.873" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13313" PostTypeId="2" ParentId="13307" CreationDate="2017-09-15T21:54:51.887" Score="0" Body="&lt;p&gt;After you eject a drive it is safe to disconnect the USB cable and/or cut the power (if the drive uses a power adapter). If you unmount it, just make sure that if it has multiple partitions, all if them are unmounted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ejecting or unmounting an external hard drive does not always make it spin down or power down; that behavior is up to the controller inside the hard disk which interfaces between USB and SATA. Ejecting simply tells the drive to finish any pending read/write operations and then ceases all communication.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/a/179372/598565&quot;&gt;https://askubuntu.com/a/179372/598565&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="6398" LastActivityDate="2017-09-15T21:54:51.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13314" PostTypeId="1" CreationDate="2017-09-15T23:19:24.997" Score="1" ViewCount="119" Body="&lt;p&gt;Basically, title... I'm new to this os as I just installed it. Google didn't return much. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially, the wireless button will not go to the &quot;on&quot; position, however the ethernet button will.&lt;/p&gt;&#xA;" OwnerUserId="12159" LastActivityDate="2017-09-15T23:19:24.997" Title="Wireless button will not switch on" Tags="|wifi|" AnswerCount="0" CommentCount="5" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13316" PostTypeId="2" ParentId="12791" CreationDate="2017-09-16T08:50:15.867" Score="2" Body="&lt;p&gt;In the end I found that my system was using the &lt;code&gt;elementary-os/daily&lt;/code&gt; repository.&lt;br/&gt;&#xA;Removing this, replacing it with &lt;code&gt;ppa:elementary-os/stable&lt;/code&gt;, and reinstalling AppCenter fixed my problem.&lt;/p&gt;&#xA;" OwnerUserId="11623" LastActivityDate="2017-09-16T08:50:15.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13317" PostTypeId="1" CreationDate="2017-09-16T10:58:07.767" Score="3" ViewCount="1340" Body="&lt;p&gt;I have fresh installation of Elementary OS and have a problem that can't handle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After system boot I have login page and when I type my password, login page dissapear, there is only wallpaper nothing more, no top toolbar and dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've reinstalled pantheon also &lt;code&gt;rename /etc/xdg/autostart/at-spi-dbus-bus.desktop to /etc/xdg/autostart/at-spi-dbus-bus.disabled&lt;/code&gt; doesn't help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you any suggestions to resolve it? Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="12165" LastActivityDate="2017-10-21T12:53:56.207" Title="Only wallpaper after login" Tags="|release-loki|desktop|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13318" PostTypeId="2" ParentId="13193" CreationDate="2017-09-16T11:16:58.833" Score="2" Body="&lt;p&gt;This was an issue with someone mistakenly entering French translations into the translation website. This only affected the English (UK) translations, US English was unaffected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These changes have been reverted and the issue should now resolve itself automatically over the coming days.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See here for the bug report on GitHub where the issue was tracked down and fixed: &lt;a href=&quot;https://github.com/elementary/appcenter/issues/481&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/481&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-16T11:16:58.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13319" PostTypeId="1" AcceptedAnswerId="13347" CreationDate="2017-09-16T14:05:02.673" Score="2" ViewCount="1091" Body="&lt;p&gt;I have installed elementary on a very old laptop with a very low resolution (1024x800). Some of the windows are cut off at the bottom so I can't access them. Here are some screenshots:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kxh27.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kxh27.png&quot; alt=&quot;Settings cut off&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IYHUA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IYHUA.png&quot; alt=&quot;Guake preferences cut off&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to lower the interface scaling but it is already at 1.&#xA;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="11883" LastActivityDate="2018-12-15T08:00:55.147" Title="Any way to make elementary better on low DPI screens?" Tags="|release-loki|settings|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13326" PostTypeId="2" ParentId="11759" CreationDate="2017-09-18T00:27:55.183" Score="0" Body="&lt;p&gt;Just as an aside for future reference, if you are using multiple displays:&#xA;The primary display must be turned on in order for multiple workspaces to be created. If it is not, switch the primary display to any currently used display.&lt;/p&gt;&#xA;" OwnerUserId="12179" LastActivityDate="2017-09-18T00:27:55.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13327" PostTypeId="1" AcceptedAnswerId="13426" CreationDate="2017-09-18T00:59:30.573" Score="2" ViewCount="1273" Body="&lt;p&gt;When I try to empty the trash bin from the Trash Docklet in Plank (hit CTRL + Right Click on Plank to go the Plank Prefs and Docklets), it often crashes Plank (if not the whole desktop.) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then, the Pref icon of Plank appears on the dock (blue anchor) and there's no way to get rid of it, but to close the session and come back. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A Plank problem or something in Pantheon ?&lt;/p&gt;&#xA;" OwnerUserId="5013" LastEditorUserId="5013" LastEditDate="2017-09-29T02:54:15.410" LastActivityDate="2017-09-29T02:54:15.410" Title="(Solved) Plank : the Trash Docklet crashes Plank" Tags="|pantheon-files|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13328" PostTypeId="2" ParentId="10997" CreationDate="2017-09-18T03:22:33.093" Score="1" Body="&lt;p&gt;It is an old bug. It has been reported here:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1355561&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1355561&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't find a workaround for this yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a bounty open for this issue, here:&#xA;&lt;a href=&quot;https://www.bountysource.com/issues/3733137-login-screen-is-the-resolution-of-the-primary-monitor-on-all-monitors&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bountysource.com/issues/3733137-login-screen-is-the-resolution-of-the-primary-monitor-on-all-monitors&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12181" LastActivityDate="2017-09-18T03:22:33.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13329" PostTypeId="1" CreationDate="2017-09-18T05:38:34.717" Score="0" ViewCount="85" Body="&lt;p&gt;I have a triple boot operating systems with windows and two linux. each one of them are having different date and times. if I updated at one, then other two's values get messed up.&#xA;How can I fix that? &lt;/p&gt;&#xA;" OwnerUserId="10226" LastEditorUserId="10226" LastEditDate="2017-09-19T09:49:01.460" LastActivityDate="2017-09-19T09:49:01.460" Title="System time is not synced with windows" Tags="|system|dual-boot|microsoft-windows|time|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13330" PostTypeId="2" ParentId="13047" CreationDate="2017-09-18T15:45:03.210" Score="1" Body="&lt;p&gt;It seems like two questions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For the first one&lt;/strong&gt;,&#xA;try (according to this &lt;a href=&quot;https://askubuntu.com/questions/498102/how-do-i-unlock-var-lib-dpkg-lock&quot;&gt;post&lt;/a&gt;) removing the locking file with the command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/dpkg/lock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then running updates manually with the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That will update your repositories information and upgrade all the apps needing an update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;As for the second question,&lt;/strong&gt;&#xA;try the solution, posted &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/711/turn-off-bluetooth-by-default-on-start-up&quot;&gt;here&lt;/a&gt;!&lt;/p&gt;&#xA;" OwnerUserId="8617" LastActivityDate="2017-09-18T15:45:03.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13331" PostTypeId="2" ParentId="11040" CreationDate="2017-09-18T15:49:04.277" Score="1" Body="&lt;p&gt;The &lt;strong&gt;bug is resolved&lt;/strong&gt; in &lt;a href=&quot;https://medium.com/elementaryos/loki-updates-for-august-4a6d183364b4&quot; rel=&quot;nofollow noreferrer&quot;&gt;august Loki updates&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="8617" LastActivityDate="2017-09-18T15:49:04.277" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13333" PostTypeId="1" AcceptedAnswerId="13336" CreationDate="2017-09-18T19:46:39.467" Score="4" ViewCount="2154" Body="&lt;p&gt;I can see a lot of Elementary Apps in the notification settings, and I know that I can hide the notifications for those apps. But what about the other apps grouped in the category &quot;Other&quot;? Can I hide the notifications for 1 specific app without hiding the rest of &quot;Other&quot; apps?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I specifically want to hide Spotify notifications, but if there is a generic solution this could help a lot of people.&lt;/p&gt;&#xA;" OwnerUserId="8269" LastActivityDate="2021-02-23T18:46:59.763" Title="Is it possible to hide notifications for a specific App?" Tags="|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13334" PostTypeId="2" ParentId="13329" CreationDate="2017-09-18T21:48:04.490" Score="1" Body="&lt;p&gt;I had a similar issue - search gave me the following which fixed my issue. Basically your system bios clock setting is the reference point to work from before changing your OS settings.&#xA;&lt;a href=&quot;https://superuser.com/questions/459159/system-clock-is-not-set-correctly-on-startup&quot;&gt;https://superuser.com/questions/459159/system-clock-is-not-set-correctly-on-startup&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10238" LastActivityDate="2017-09-18T21:48:04.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13335" PostTypeId="1" CreationDate="2017-09-18T22:30:24.550" Score="1" ViewCount="430" Body="&lt;p&gt;I noticed that bluetooth and Network settings are restoring to defaults on startup.&#xA;I find an old topic how to switch bluetooth off on start up.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/711/turn-off-bluetooth-by-default-on-start-up?newreg=6cb6a3a8a2c24dfe951fee87d773b6a2&quot;&gt;Turn off bluetooth by default on start up&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I want to disable LAN (Ethernet) too. It is enabled after every reboot.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nMUTe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nMUTe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How someone can help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings, Max Meier&lt;/p&gt;&#xA;" OwnerUserId="12185" LastActivityDate="2023-12-20T04:12:01.597" Title="Turn off LAN (Ethernet) by default on start up" Tags="|startup|ethernet|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13336" PostTypeId="2" ParentId="13333" CreationDate="2017-09-19T00:14:07.197" Score="13" Body="&lt;p&gt;elementary relies on applications notifying the OS that they want to use notifications by setting a property in their &lt;code&gt;.desktop&lt;/code&gt; file. Applications not built/controlled by elementary are not guaranteed to do this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add the following line to the bottom of the &lt;code&gt;.desktop&lt;/code&gt; file for the application in question and it should show up in the notifications settings so you can configure it like the elementary applications.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X-GNOME-UsesNotifications=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, my &lt;code&gt;/usr/share/applications/spotify.desktop&lt;/code&gt; file looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Spotify&#xA;GenericName=Music Player&#xA;Comment=Spotify streaming music client&#xA;Icon=spotify-client&#xA;Exec=spotify %U&#xA;TryExec=spotify&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Audio;Music;Player;AudioVideo;&#xA;MimeType=x-scheme-handler/spotify;&#xA;X-GNOME-UsesNotifications=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And my notification settings now have the Spotify application as a configurable notifications source:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TMDPp.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TMDPp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not guaranteed to be a permanent fix, as the application in question may overwrite its &lt;code&gt;.desktop&lt;/code&gt; file during updates, etc...&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2018-03-14T00:29:16.677" LastActivityDate="2018-03-14T00:29:16.677" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13337" PostTypeId="2" ParentId="12374" CreationDate="2017-09-19T07:16:06.947" Score="2" Body="&lt;p&gt;This is a late answer, but I'll try to help in case you're still having this problem or if someone else stumbles upon this page. :) Note that this might not be a recommended or most optimal way of solving these kinds of issues, but it's how I do it.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;My assumption is that it has to do with Elementary being 64-bit&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This can indeed be the case. You can enable the installation of 32-bit versions of packages by running this command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --add-architecture i386&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This needs to be enabled for the following to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, next I'll show you GOG's version of Crimsonland as an example. It did not launch right away, so I ran it through the terminal. You can launch a terminal in the game's folder by navigating to it in Files (Home -&gt; GOG Games -&gt; Gamename), right-clicking the file area and choosing &quot;Open with an application -&gt; Terminal&quot;. Then run the command &lt;code&gt;./start.sh&lt;/code&gt; as in the following image. Most, if not all, Linux GOG games are run via the file &lt;strong&gt;start.sh&lt;/strong&gt;&lt;a href=&quot;https://i.stack.imgur.com/snp3V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/snp3V.png&quot; alt=&quot;Trying to launch GOG&amp;#39;s version of Crimsonland via the terminal.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice that the error message shows the name of a library: &lt;strong&gt;libopenal.so.1&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you need to figure out what package this might relate to. I searched for &lt;strong&gt;libopenal&lt;/strong&gt; by using the &lt;strong&gt;Synaptic Package Manager&lt;/strong&gt; application available on the elementary AppCentre. I found a package called &lt;strong&gt;libopenal1&lt;/strong&gt; of which the 64-bit version was already installed. I decided to try installing the 32-bit version of it as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I closed the Synaptic Package Manager and issued the following command on the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libopenal1:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notice the important part: I put &lt;strong&gt;:i386&lt;/strong&gt; at the end of the package name. This means that I am asking &lt;strong&gt;apt&lt;/strong&gt; to install the 32-bit version of the package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I proceeded with the installation and afterwards tried starting the game again. It worked!&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2017-09-19T07:16:06.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13338" PostTypeId="2" ParentId="13327" CreationDate="2017-09-19T10:08:17.083" Score="2" Body="&lt;p&gt;I found something similar using the stable version of Loki.  The unstable (daily) version works better - there is no persistent Plank item in the most recent version for example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the trash contains a large number (1000's) of files, then the context menu in plank can take several seconds to appear during which time Plank appears to freeze; presumably it is busy populating the context menu &quot;restore&quot; section with each file name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also in neither case did the &quot;restore file&quot; option on the context menu work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this is mostly down to Plank - you can install a different filemanager - e.g. Thunar or Dolphin - and use Settings/Applications to set it as the default file browser.  The docklet launches the default filemanager.  I found the same behaviour using a different filemanager.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-09-19T10:08:17.083" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13339" PostTypeId="2" ParentId="13335" CreationDate="2017-09-19T17:56:23.900" Score="0" Body="&lt;p&gt;Run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /var/lib/NetworkManager/NetworkManager.state&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And change the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NetworkingEnabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NetworkingEnabled=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On startup, the Ethernet connection will stay disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to enable it back when the computer is on, you just change back the line to &lt;code&gt;true&lt;/code&gt; and run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-09-19T17:56:23.900" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13341" PostTypeId="1" CreationDate="2017-09-19T20:35:34.377" Score="0" ViewCount="847" Body="&lt;p&gt;Command run: sudo apt upgrade&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[sudo] password for user:&#xA;&#xA;Reading package lists... Done&#xA;Building dependency tree&#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;libllvm3.8 libmircommon5 libvala-0.34-0&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following NEW packages will be installed:&#xA;libvala-0.36-0 linux-headers-4.10.0-35 linux-headers-4.10.0-35-generic linux-image-4.10.0-35-generic linux-image-extra-4.10.0-35-generic&#xA;linux-signed-image-4.10.0-35-generic&#xA;The following packages will be upgraded:&#xA;apparmor apparmor-profiles apparmor-utils appcenter bind9-host bluez bluez-cups bluez-obexd chromium-browser chromium-browser-l10n&#xA;chromium-codecs-ffmpeg-extra cryptsetup cryptsetup-bin cups-ppdc dnsutils ghostscript ghostscript-x gir1.2-gdkpixbuf-2.0 gir1.2-packagekitglib-1.0&#xA;gvfs gvfs-backends gvfs-bin gvfs-common gvfs-daemons gvfs-fuse gvfs-libs libapparmor-perl libapparmor1 libbind9-140 libbluetooth3 libcryptsetup4&#xA;libdns-export162 libdns162 libgdk-pixbuf2.0-0 libgdk-pixbuf2.0-common libgs9 libgs9-common libisc-export160 libisc160 libisccc140 libisccfg140&#xA;liblouis-data liblouis9 liblwres141 libpackagekit-glib2-16 libpython3.5 libpython3.5-minimal libpython3.5-stdlib libscratchcore0 libsmbclient&#xA;libvirt-bin libvirt0 libwbclient0 libwingpanel-2.0-0 libxml2 libxml2:i386 libxml2-utils linux-doc linux-firmware linux-generic-hwe-16.04&#xA;linux-headers-generic-hwe-16.04 linux-image-generic-hwe-16.04 linux-libc-dev linux-signed-image-generic-hwe-16.04 pantheon-greeter&#xA;python3-apparmor python3-libapparmor python3-louis python3.5 python3.5-minimal qemu-block-extra qemu-system-common qemu-system-x86 qemu-utils&#xA;samba-libs scratch-text-editor snapd switchboard-plug-networking tcpdump wingpanel wingpanel-indicator-network xserver-common&#xA;82 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 1,464 kB/225 MB of archives.&#xA;After this operation, 316 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;WARNING: The following packages cannot be authenticated!&#xA;libvala-0.36-0 libscratchcore0 scratch-text-editor wingpanel libwingpanel-2.0-0 pantheon-greeter switchboard-plug-networking&#xA;wingpanel-indicator-network appcenter&#xA;Install these packages without verification? [y/N] n&#xA;E: Some packages could not be authenticated&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I did to try to fix it. Reimported keys. Removed apt caches and such and reran sudo apt update which works fine. &lt;/p&gt;&#xA;" OwnerUserId="12196" LastEditorUserId="12196" LastEditDate="2017-09-19T20:57:00.570" LastActivityDate="2024-03-26T12:07:15.840" Title="Failed to Authenticate apt upgrade" Tags="|release-loki|updates|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13342" PostTypeId="1" CreationDate="2017-09-20T01:06:15.453" Score="2" ViewCount="213" Body="&lt;p&gt;The image I put in the background, but I deleted it in the meantime, remained in the settings from the picture. How can I delete it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;l look in file system/usr/share/background but I did not find it there...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.oldschool-samp.com/slike/images/screenaza.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.oldschool-samp.com/slike/images/screenaza.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="12197" LastActivityDate="2018-01-18T10:24:29.077" Title="Delete pictures in background" Tags="|release-loki|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13343" PostTypeId="2" ParentId="9672" CreationDate="2017-09-20T06:12:04.720" Score="1" Body="&lt;p&gt;Not necessarily.  I have tried Loki with two different 2in1 laptops.  On one, a Dell 3000 series, the touchscreen works, but rotation is buggy.  It always rotates into the wrong orientation, so it is totally unusable.  I also have an Asus Vivobook, and on that one, the rotation doesn't work at all, but at least it will orient to the normal, laptop direction.  I haven't tried getting the trackpad and keyboard lockup feature to work on my dell, but it doesn't work on the Asus, so I can't really use it in tablet mode.  So, I don't recommend Loki for 2in1 laptops.  It doesn't work on either of mine.&lt;/p&gt;&#xA;" OwnerUserId="11655" LastActivityDate="2017-09-20T06:12:04.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13344" PostTypeId="2" ParentId="13342" CreationDate="2017-09-20T08:26:52.730" Score="1" Body="&lt;p&gt;It should be under:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/username/.local/share/backgrounds&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-09-20T08:26:52.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13345" PostTypeId="2" ParentId="13317" CreationDate="2017-09-20T09:33:23.627" Score="2" Body="&lt;p&gt;A similar thing happens with me, but after maybe 1min/30sec it appears all normal. I thing this only happen when i installed the nvidia graphics??? i really don't remember.&#xA;Wait sometime like me to see if it appears.&lt;/p&gt;&#xA;" OwnerUserId="12201" LastActivityDate="2017-09-20T09:33:23.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13346" PostTypeId="2" ParentId="13341" CreationDate="2017-09-20T09:46:35.227" Score="-1" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-key update&#xA;$ sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12201" LastEditorUserId="578" LastEditDate="2017-09-21T22:22:31.720" LastActivityDate="2017-09-21T22:22:31.720" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13347" PostTypeId="2" ParentId="13319" CreationDate="2017-09-20T11:39:12.327" Score="2" Body="&lt;p&gt;I haven't tried this myself yet...but you might be able to get what you want using xrandr&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a terminal type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --current&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is list your display interfaces. Run the next command replacing &#xA;eDP-0 for your display.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-0 --scale 0.95x0.95&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The default setting is 1x1. Anything smaller will &quot;shrink&quot; the objects on the screen and give you a more usable display...in theory. Play with the settings in small increments - nothing drastic. The settings likely will not stick upon logout, so you might want to take the command and add it to you start up. This can be done within the elementary system settings or elementary tweaks.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-09-20T12:08:08.590" LastActivityDate="2017-09-20T12:08:08.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13349" PostTypeId="1" CreationDate="2017-09-20T15:05:12.823" Score="1" ViewCount="1122" Body="&lt;p&gt;In attempting to install Elementary OS on my XPS 15 9560 (i7, 32GB ram, 1TB ssd), I've run into the issue with the installer not recognizing my main (and only) SSD drive. On the 9560 it happens to be NVMe.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop came pre-configured to use &quot;RAID&quot; (so Windows can use Intel's RST) and from what I understand, setting it to AHCI will cause it to be recognized by linux. However, doing so will cause issues with the pre-installed Windows 10 (that I do not want to/cannot remove because I need it for Visual Studio).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to get Intel RST/Raid/NVMe drivers for the installer so that I can install without changing the bios setting to AHCI?&lt;/p&gt;&#xA;" OwnerUserId="12202" LastActivityDate="2024-03-20T20:04:50.580" Title="Installer NVMe Support (Dell XPS 15 9560)" Tags="|release-loki|system-installation|drivers|hardware|ssd|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13351" PostTypeId="1" CreationDate="2017-09-20T18:09:30.797" Score="0" ViewCount="844" Body="&lt;p&gt;I'm running a Lenovo Yoga 720-15IKB. Trying to dual boot elementary OS with Windows10. At pretty near the end of the installation process when everything is being installed, it just crashes. It gives me a message that the setup quit unexpectedly and that I can send a message about it (sorry it's in Finnish and can't translate it 100% accurately). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't have any specs on the issue or what's causing it, the message window is just empty apart from telling that I can file a report about it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click &quot;close&quot; it tries to collect problem information but then says &quot;This is not an official elementary package. Please remove any third party package and try again.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I reboot my computer, I get the grub menu and I could boot elementary succesfully from there. I'm just worried that it might be corrupt or something so I would rather fix the installation issue...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed Ubuntu succesfully a couple times, but Elementary OS seems to give me a headache right now. :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System is running in UEFI, Secure Boot is disabled as well as Fast Boot.&lt;/p&gt;&#xA;" OwnerUserId="12144" LastActivityDate="2018-11-15T18:01:45.307" Title="elementary OS installer crashes" Tags="|system-installation|boot|dual-boot|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13352" PostTypeId="2" ParentId="13351" CreationDate="2017-09-20T20:12:53.453" Score="1" Body="&lt;p&gt;There seems to be a bug with running the installer in Finnish. What I've done with elementary installations is that I've run the installer in English and afterwards changed the language to Finnish from the system settings. This way it's possible to bypass this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you later notice some applications like LibreOffice not using the correct language, go back to the language settings and see if it prompts you to &quot;complete installing the language support&quot;. For whatever reason this extra step is sometimes needed after installing applications.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2017-09-20T20:12:53.453" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13354" PostTypeId="1" CreationDate="2017-09-21T07:11:35.593" Score="0" ViewCount="818" Body="&lt;p&gt;I have a headset, but it's mic is not of good quality and I want to use headset's headphones while using laptop's internal mic.&#xA;When I plug that headset, internal mic (as well as internal speakers) is automuted and there is no such an option in audio input parameters.&lt;/p&gt;&#xA;" OwnerUserId="12200" LastActivityDate="2019-12-11T02:00:50.070" Title="How to set audio input to internal mic when plugging headset?" Tags="|audio|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13355" PostTypeId="2" ParentId="13317" CreationDate="2017-09-21T09:11:00.470" Score="0" Body="&lt;p&gt;You can try to do &lt;code&gt;sudo service lightdm restart&lt;/code&gt; from terminal (you can access it by pressing &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt;. This will restart the display manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try another solution taken from &lt;a href=&quot;https://elementaryos.stackexchange.com/a/772/12200&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall pantheon:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove pantheon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reinstall it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pantheon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12200" LastActivityDate="2017-09-21T09:11:00.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13356" PostTypeId="2" ParentId="13354" CreationDate="2017-09-21T09:17:56.603" Score="1" Body="&lt;p&gt;A workaround for me is using pavucontrol. Install it via AppCenter or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Start it and choose your internal mic. Try to mute your external and unmute your internal mic via the button in the screenshot.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xcCy2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xcCy2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10206" LastEditorUserId="10206" LastEditDate="2017-09-21T11:26:18.093" LastActivityDate="2017-09-21T11:26:18.093" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13357" PostTypeId="2" ParentId="7859" CreationDate="2017-09-21T09:18:44.987" Score="1" Body="&lt;p&gt;You can use &lt;a href=&quot;https://wiki.gnome.org/Apps/Evolution&quot; rel=&quot;nofollow noreferrer&quot;&gt;Evolution&lt;/a&gt; mail client. It has plugin to connect to Exchange servers.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install evolution evolution-ews&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then when you're adding new account just select Exchange option.&lt;/p&gt;&#xA;" OwnerUserId="12200" LastActivityDate="2017-09-21T09:18:44.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13360" PostTypeId="1" CreationDate="2017-09-21T13:50:55.170" Score="0" ViewCount="1102" Body="&lt;p&gt;I just installed Elemental OS (Loki) today and it's great really, but I do have one question:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using an external monitor on my laptop (Ive switched off my laptop monitor display so I'm only using the external one), it's a 24&quot; 1080p pretty standard work monitor and for some reason the scaling of the entire OS is just &quot;big&quot;. Every window and font and title bar etc seems to be scaled just a bit too high.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some research and found some terminal commands to scale the Gnome Interface settings, which allow you to specify an integer (i.e. scale 2) - but even with that number set to 1 the desktop still seems too large. Ideally I would like something like 0.8 but unfortunately that cli doesn't accept double's (scale 0.8 doesn't work).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried using the dconf-editor with the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know a way to scale the Interface down just a notch (below 1 scale) ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="12211" LastActivityDate="2018-11-15T23:03:10.737" Title="Scale interface to less than 1" Tags="|resolution|gnome|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ClosedDate="2018-11-30T19:57:52.820" ContentLicense="CC BY-SA 3.0" />
  <row Id="13361" PostTypeId="2" ParentId="13360" CreationDate="2017-09-21T15:42:15.147" Score="0" Body="&lt;p&gt;There may be a solution using xrandr. Ubuntu has a built in side in their settings to adjust it. So it must be possible.&#xA;Check what I posted here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/13347/7492&quot;&gt;https://elementaryos.stackexchange.com/a/13347/7492&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-09-21T15:42:15.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13362" PostTypeId="1" CreationDate="2017-09-21T18:36:49.280" Score="2" ViewCount="232" Body="&lt;p&gt;Recently I've updated to the kernel version 4.13.3, which caused me the problem of black screen at login and the inability to log into the OS. After fixing that, I found myself with strange fonts, a kind of saturation of the colors and an overall darkness to the screen even with brightness at 100%. I've managed to solve the terminal fonts with a global gsettings reset, however this unusual darkness remains, and I've got no idea how to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried different kernel versions, but nothing changed. &lt;a href=&quot;https://i.stack.imgur.com/AvzmP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AvzmP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IbKyy.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IbKyy.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how much you can see in the pictures, but for me with an app opened, the widget on top is very black, so everything greyed out is black.&lt;/p&gt;&#xA;" OwnerUserId="12213" LastActivityDate="2017-10-17T06:54:19.117" Title="Odd colours/saturation/darkness" Tags="|desktop|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13366" PostTypeId="1" AcceptedAnswerId="14165" CreationDate="2017-09-22T10:10:48.250" Score="2" ViewCount="327" Body="&lt;p&gt;I have a NAS which I built using OMV as the OS with all my music documents e.t.c. The folders from the NAS are shared via SAMBAI installed gigolo so that certain folders from my NAS are mounted when Elementary OS starts.That works perfectly and the mounted network folders show fine in the file manager but when using applications they do not show in the open/save dialogue boxes. For example the music player I choose to open a file and I am only presented with local locations the network mounts do not show.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway around this?&lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2017-12-16T02:36:04.657" Title="Mounted windows network folders do not show in open save box on native apps" Tags="|release-loki|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13368" PostTypeId="1" CreationDate="2017-09-22T15:01:26.890" Score="1" ViewCount="106" Body="&lt;p&gt;I have uninstalled pulseaudio and for this place I installed gnome-alsamixer. But icon from pulse audio still is in top panel. I want to replace it for gnome-alsamixer volume changer. How to do it?&lt;/p&gt;&#xA;" OwnerUserId="12221" LastActivityDate="2017-09-22T15:01:26.890" Title="Change volume icon in panel" Tags="|settings|wingpanel|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13369" PostTypeId="1" CreationDate="2017-09-22T15:23:37.647" Score="4" ViewCount="3950" Body="&lt;p&gt;i've installed libinput-gestures to get OS X-like gesture for switching workspaces.&#xA;Sometimes some previously copied text gets pasted randomly in the current workspace, after the three finger swipe up or down gesture. That's extremely annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched a lot but didn't find any solution. &#xA;I own a Dell XPS 13 9343. How can i disable the three tap paste gesture?&lt;/p&gt;&#xA;" OwnerUserId="6293" LastActivityDate="2020-04-01T05:39:18.323" Title="Disable Three Tap Paste Gesture" Tags="|settings|touchpad|mouse|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13370" PostTypeId="1" CreationDate="2017-09-22T18:18:43.223" Score="0" ViewCount="504" Body="&lt;p&gt;Have installed gconf-editor in loki but the only app showing is gconf-editor. How can I access the other folders? (I would like to hide the clock from the wingpanel)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jV630.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jV630.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11875" LastEditorUserId="11875" LastEditDate="2017-09-22T18:35:39.957" LastActivityDate="2017-09-24T07:28:50.813" Title="gconf-editor not showing apps" Tags="|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13371" PostTypeId="2" ParentId="13349" CreationDate="2017-09-22T19:51:04.753" Score="0" Body="&lt;p&gt;Try &lt;a href=&quot;https://github.com/rcasero/doc/wiki/Ubuntu-linux-on-Dell-XPS-15-(9560)&quot; rel=&quot;nofollow noreferrer&quot;&gt;this guide&lt;/a&gt; for installing Ubuntu on XPS 9560. It worked for mine Elementary OS on XPS 9560 (512 GB SSD version).&lt;/p&gt;&#xA;" OwnerUserId="12223" LastActivityDate="2017-09-22T19:51:04.753" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13373" PostTypeId="1" AcceptedAnswerId="13408" CreationDate="2017-09-23T12:35:38.097" Score="2" ViewCount="282" Body="&lt;p&gt;Elementary allows for creation of WiFi hotspot in &quot;network settings&quot; menu. However, the Hotspot mode is turned off at every boot. How to make Elementary automatically create WiFi Hotspot at launch, if there's a WiFi adapter plugged in?&lt;/p&gt;&#xA;" OwnerUserId="12229" LastActivityDate="2017-09-27T10:55:10.370" Title="Automatically create WiFi hotspot after boot" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13374" PostTypeId="1" CreationDate="2017-09-23T19:53:53.093" Score="0" ViewCount="231" Body="&lt;p&gt;I can't use my Bose Soundlink mini as a bluetooth speaker in elementary OS. I can pair the device, but it stays disconnected. Sometime it connects, but sound still go through the laptop speaker. In the sound panel my speaker doesn't appear.&#xA;Any idea ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the results of the command &lt;code&gt;pactl list short | grep blue&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;7   module-bluetooth-policy     &#xA;8   module-bluetooth-discover       &#xA;9   module-bluez5-discover&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12233" LastEditorUserId="16827" LastEditDate="2019-04-16T14:23:38.713" LastActivityDate="2023-12-22T17:04:35.543" Title="Can't use Bose Soundlink mini with elementary OS" Tags="|bluetooth|audio|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="13376" PostTypeId="2" ParentId="13370" CreationDate="2017-09-24T07:28:50.813" Score="1" Body="&lt;p&gt;Try installing dconf-editor instead, I get plenty more folders in there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you want to hide the indicator totally (date AND time), open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove wingpanel-indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(If you want to get it back, do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wingpanel-indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10206" LastActivityDate="2017-09-24T07:28:50.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13379" PostTypeId="1" CreationDate="2017-09-24T12:35:54.847" Score="1" ViewCount="472" Body="&lt;p&gt;I decided to install ElementaryOs dist on my laptop (dual boot with W10) and, after trying and trying I cant figure out what am I doing wrong or whats the problem. &#xA;I made the correct and typical partitions (root home swap boot) and after finishing the installation, when I click restart now, the screen gets Frozen and nothing happens. I restart it by the power off button because it doesn't even goes to the terminal or anything and when I start the system with ElementaryOs, I log in and the desktop doesn't load, I can move the mouse and that but I can only see the wallpaper. I tried everything I found on the web and nothing worked. I tried also to install other Linux distributions and Ubuntu doesn't work either, it doesn't pass from the Ubuntu loading screen or it gets purple or black. I think the problem may be the graphic card (drivers maybe?).&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="12241" LastActivityDate="2018-02-21T21:09:44.430" Title="No desktop after installing Elementary OS" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ClosedDate="2018-03-11T02:01:30.583" ContentLicense="CC BY-SA 3.0" />
  <row Id="13380" PostTypeId="2" ParentId="13379" CreationDate="2017-09-24T15:10:46.687" Score="0" Body="&lt;p&gt;This is a common problem that has been addressed a number of times. Usually the fix is to run the below command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-09-24T15:10:46.687" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13383" PostTypeId="2" ParentId="11412" CreationDate="2017-09-24T18:43:15.667" Score="1" Body="&lt;p&gt;In file gtk.css, change this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MarlinViewWindow .source-list.sidebar.view {&#xA;  background-color: white; }&lt;/p&gt;&#xA;" OwnerUserId="11602" LastActivityDate="2017-09-24T18:43:15.667" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13384" PostTypeId="2" ParentId="8119" CreationDate="2017-09-25T07:49:47.843" Score="1" Body="&lt;p&gt;Actually using only the language code (and nothing of the variant) is hard-coded in the source of &lt;code&gt;wingpanel-indicator-keyboard&lt;/code&gt;. So you can either edit the source code or open a feature request.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-09-25T07:49:47.843" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13385" PostTypeId="1" AcceptedAnswerId="13473" CreationDate="2017-09-25T10:35:20.920" Score="1" ViewCount="1032" Body="&lt;p&gt;I have installed Elementary OS loki on my T400 notebook.(old but works flawlessly lol ) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a NAS server which has virtualbox installed. There is a virtual machine with windows installed and my printer is shared via this virtual machine. This is done because my printer is so ancient it doesn't work with the print plugin on the NAS box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see my printer via a laptop running windows 7 and it prints fine. I can also see it from my desktop PC running linux mint 17.3 and again it prints with no issue. On my T400 I had Linux mint 18.1 and again that found the printer and it worked perfectly. Only now I have elementary on this laptop it is not found. Elementary does list the printer but that id directly from the NAS not the virtual machine. Any suggestions would be appreciated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;THanks&lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2017-10-03T18:30:38.257" Title="Windows shared printer not shown" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13387" PostTypeId="2" ParentId="10857" CreationDate="2017-09-25T19:46:56.450" Score="0" Body="&lt;p&gt;OK so it seems that adding tlp or laptop Mode tools will disable or cripple bluetooth. I comfirmed with both of those apps. Once I removed those utilities bluetooth worked like a charm after a restart. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue with this is that if you want a decent battery use on your laptop you need to use either one of these tools. Yikes!! Not sure why this happens though as using these utilities should not affect bluetooth. If someone could verify my findings would be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a Lenovo Z-50 laptop. Here is my dmesg output.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dmesg | grep -i blue&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;[    2.023155] usb 4-2: Product: Bluetooth Radio &#xA;[   29.665116] Bluetooth: Core ver 2.21&#xA;[   29.665149] Bluetooth: HCI device and connection manager initialized&#xA;[   29.665157] Bluetooth: HCI socket layer initialized&#xA;[   29.665163] Bluetooth: L2CAP socket layer initialized&#xA;[   29.665173] Bluetooth: SCO socket layer initialized&#xA;[   30.152299] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723&#xA;[   30.152308] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin&#xA;[   30.577370] Bluetooth: hci0: rom_version status=0 version=1&#xA;[   48.374181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[   48.374188] Bluetooth: BNEP filters: protocol multicast&#xA;[   48.374197] Bluetooth: BNEP socket layer initialized&#xA;[  108.796222] Modules linked in: ctr ccm bnep binfmt_misc rtsx_usb_ms memstick wl(POE) uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_core v4l2_common kvm_amd kvm videodev media irqbypass arc4 rtl8723be joydev input_leds serio_raw btcoexist btusb btrtl fam15h_power rtl8723_common snd_hda_codec_conexant rtl_pci snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel rtlwifi snd_hda_codec mac80211 snd_hda_core snd_hwdep snd_pcm snd_seq_midi btbcm snd_seq_midi_event edac_mce_amd cfg80211 btintel k10temp snd_rawmidi snd_seq bluetooth edac_core snd_seq_device snd_timer snd soundcore i2c_piix4 shpchp ideapad_laptop sparse_keymap wmi 8250_fintek mac_hid parport_pc ppdev lp parport autofs4 drbg ansi_cprng algif_skcipher af_alg dm_crypt rtsx_usb_sdmmc rtsx_usb hid_generic usbhid hid amdkfd&#xA;[  114.811473] Bluetooth: RFCOMM TTY layer initialized&#xA;[  114.811489] Bluetooth: RFCOMM socket layer initialized&#xA;[  114.811501] Bluetooth: RFCOMM ver 1.11&lt;/p&gt;&#xA;" OwnerUserId="6898" LastEditorUserId="6898" LastEditDate="2017-09-25T19:52:26.540" LastActivityDate="2017-09-25T19:52:26.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13389" PostTypeId="1" CreationDate="2017-09-26T01:32:44.547" Score="0" ViewCount="75" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x8crh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x8crh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The calendar folder in the lower left corner looks like this which makes me uncomfortable,but it appears right in kde. So do I need to install some dependences ? Thx.&lt;/p&gt;&#xA;" OwnerUserId="12250" LastEditorUserId="308" LastEditDate="2018-08-07T16:47:05.893" LastActivityDate="2018-08-07T16:47:05.893" Title="Korganizer looks stranger on elementary OS" Tags="|settings|applications|qt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13391" PostTypeId="1" CreationDate="2017-09-26T09:33:40.633" Score="2" ViewCount="478" Body="&lt;p&gt;Is there a way to prevent applications from overlapping the plank in normal mode, but also hide the plank if the application goes into full screen mode?&lt;/p&gt;&#xA;" OwnerUserId="12254" LastActivityDate="2017-09-26T12:39:34.137" Title="Prevent applications from overlapping plank" Tags="|release-loki|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13392" PostTypeId="2" ParentId="13391" CreationDate="2017-09-26T10:09:33.910" Score="2" Body="&lt;p&gt;If you hold control and right click on Plank (preferably in an area of the dock itself and not an icon) and go to Preferences &gt; Behavior and select the hide mode you would like. I have mine set to Window Dodge which forces the dock to hide whenever a window tries to overlap - including when it's full screen. That might work for you, but play around with the different settings to find the right one.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-09-26T12:39:34.137" LastActivityDate="2017-09-26T12:39:34.137" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13393" PostTypeId="1" AcceptedAnswerId="13397" CreationDate="2017-09-26T11:57:31.370" Score="0" ViewCount="116" Body="&lt;p&gt;I have a lot of question before my first installation of a linux distribution.&#xA;For my next job (i'll start in 1 month), i'll use a computer (with Linux). So i'll try to learn to use it before i start my job.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, i've search somes informations and i see we have a lot of distribution. I've choose Elementary OS (for the user interface).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have this components :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Intel core I5 760 - 2.80ghZ&lt;/li&gt;&#xA;&lt;li&gt;NVIDIA Geforce GTX 460&lt;/li&gt;&#xA;&lt;li&gt;USB Wifi - Netgear wma3100m&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;So, i'll add a hard drive in my computer, i'll use the first for Windows 10 and the second for Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, i want to know if my computer is compatible with Elementary OS (with my I5-Geforce-USB Wifi Dongle).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="12257" LastActivityDate="2017-09-26T18:55:45.683" Title="First installation" Tags="|release-loki|system-installation|display|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13395" PostTypeId="1" CreationDate="2017-09-26T15:22:55.970" Score="2" ViewCount="161" Body="&lt;p&gt;Does any one have any prior experience with making gtk3 apps with Ruby, and&#xA;the bindings to the apis for ruby (GObject etc)?&lt;/p&gt;&#xA;" OwnerUserId="12259" LastActivityDate="2017-10-26T17:27:48.523" Title="App development with Ruby in elementary OS" Tags="|appcenter|development|programming|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13396" PostTypeId="2" ParentId="13395" CreationDate="2017-09-26T15:26:13.767" Score="0" Body="&lt;p&gt;Try finding a IRC channel of Ruby, that's the way I do when I program on vala&lt;/p&gt;&#xA;" OwnerUserId="12201" LastActivityDate="2017-09-26T15:26:13.767" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13397" PostTypeId="2" ParentId="13393" CreationDate="2017-09-26T15:32:23.447" Score="0" Body="&lt;p&gt;I think u will not have problem with CPU and GPU, after installing, install the drivers from App Center, I really recommend this&#xA;Wifi, only testing, but I have a USB wifi from China and it works, probably it's gonna work too&lt;/p&gt;&#xA;" OwnerUserId="12201" LastActivityDate="2017-09-26T15:32:23.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13398" PostTypeId="2" ParentId="13395" CreationDate="2017-09-26T16:31:15.943" Score="2" Body="&lt;p&gt;This GitHub &lt;a href=&quot;https://github.com/cedlemo/ruby-gtk3-tutorial&quot; rel=&quot;nofollow noreferrer&quot;&gt;repository&lt;/a&gt; gives you some basic examples on how to build a GTK app using Ruby. This is example #2 being run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BDMdk.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BDMdk.gif&quot; alt=&quot;Ruby&amp;amp;GTK&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-09-26T16:31:15.943" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13399" PostTypeId="2" ParentId="716" CreationDate="2017-09-26T16:55:44.807" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo apt-get install python-software-properties&#xA;sudo add-apt-repository ppa:webupd8team/java&#xA;sudo apt-get update&#xA;sudo apt-get install oracle-java8-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12261" LastActivityDate="2017-09-26T16:55:44.807" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13400" PostTypeId="2" ParentId="13389" CreationDate="2017-09-26T18:27:04.297" Score="1" Body="&lt;p&gt;Installing libqt5libqgtk2 solves this issue.&lt;/p&gt;&#xA;" OwnerUserId="12259" LastActivityDate="2017-09-26T18:27:04.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13401" PostTypeId="1" CreationDate="2017-09-26T18:45:35.900" Score="0" ViewCount="963" Body="&lt;p&gt;i would like to know which wine packages can be installed in elementary os with official (default) sources.list &lt;/p&gt;&#xA;&#xA;&lt;p&gt;so i ll be grateful if someone can show me what show &lt;code&gt;apt install wine (click two times on &amp;lt;tab&amp;gt; button )&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;for example for me it shows: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/e7ixU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/e7ixU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and test if it can install wine1.6-i386 == check if there are no errors &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wine1.6-i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-12-21T07:01:20.277" Title="wine on elementary os [looking for confirmation]" Tags="|wine|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13402" PostTypeId="2" ParentId="13393" CreationDate="2017-09-26T18:55:45.683" Score="0" Body="&lt;p&gt;i m using elementary os 0.4.1 loki with a bad pc than yours &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dual-Core Pentium® Dual-Core CPU       T4500  @ 2.30GHz Intel&lt;/li&gt;&#xA;&lt;li&gt;Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) &lt;/li&gt;&#xA;&lt;li&gt;RAM: 4 GB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;and everything works perfectly , i run firefox (more than 8 tabs), atom, hexchat, terminals, Gimp, and scripts ... at the same time and it works without any bugs (it's like if i have the best pc) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;wifi works with netgear and other adapters &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i dont know ur RAM but i think it will works without any problem &lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2017-09-26T18:55:45.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13403" PostTypeId="2" ParentId="13401" CreationDate="2017-09-26T20:15:56.107" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;show me apt install wine&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DrQSM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DrQSM.png&quot; alt=&quot;apt install wine + tab&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install wine1.6-i386&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gave me an error,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ttf-mscorefonts-installer: downloading http://downloads.sourceforge.net/corefonts/andale32.exe&#xA;Get:1 http://downloads.sourceforge.net/corefonts/andale32.exe [652 B]&#xA;Err:1 http://downloads.sourceforge.net/corefonts/andale32.exe                           &#xA;  Hash Sum mismatch&#xA;Fetched 652 B in 1s (341 B/s)                                                           &#xA;W: Can't drop privileges for downloading as file '/var/lib/update-notifier/package-data-downloads/partial/andale32.exe' couldn't be accessed by user '_apt'. - pkgAcquire::Run (13: Permission denied)&#xA;E: Failed to fetch https://downloads.sourceforge.net/#!/corefonts/andale32.exe  Hash Sum mismatch&#xA;&#xA;E: Download Failed&#xA;Setting up ttf-mscorefonts-installer (3.4+nmu1ubuntu2) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which I solved by using Workaround 1 on &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/msttcorefonts/+bug/1607535&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; Launchpad bug report.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rosyY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rosyY.png&quot; alt=&quot;succesful installation of wine1.6-i386&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-09-26T20:15:56.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13404" PostTypeId="1" CreationDate="2017-09-26T22:05:47.403" Score="0" ViewCount="764" Body="&lt;p&gt;I'm currently running Elementary OS Loki 0.4 on my Dell Inspiron 5566, and I just ran into an issue where I simply can't edit the names of any file or folder if I use the pre-installed pantheon-files app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the Nemo/Cinnamon file manager, and file renaming works fine in that app. I was about to just switch over to that since it seems like a more robust app than pantheon-files, but Nemo also gave me one major issue. Whenever I launch Nemo, an un-interactive Desktop window shows up and doesn't go away until Nemo is completely closed. I've tried searching to see if there's a solution to this, but I couldn't find anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried uninstalling pantheon-files from the app store and reinstalling it. That didn't help. I've tried removing it with the --purge function from the Terminal, and reinstalling it, and that didn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point, I just want one of them to work without having to reinstall the entire OS. The only thing I know for sure, is that it was working fine before I tried installing emulationstation, and as I was installing it, I went to my pantheon-files to create some directories, and that's when I noticed it didn't work. I'm not sure if something I did while installing emulationstation broke it, but that's when I noticed it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if you need any more info from me.&lt;/p&gt;&#xA;" OwnerUserId="12264" LastActivityDate="2023-12-09T21:02:35.317" Title="Cannot rename files within the pantheon-files application" Tags="|pantheon-files|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13405" PostTypeId="1" CreationDate="2017-09-26T23:21:17.883" Score="0" ViewCount="98" Body="&lt;p&gt;What method is available to select text on webkit2gtk. I could not find anything on the API for Vala webkit2:&#xA;&lt;a href=&quot;https://valadoc.org/webkit2gtk-4.0/WebKit.WebView.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://valadoc.org/webkit2gtk-4.0/WebKit.WebView.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The requirement is to get the selected text on a webpage after the user releases the mouse after text selection.&lt;/p&gt;&#xA;" OwnerUserId="613" LastEditorUserId="3189" LastEditDate="2017-09-27T08:46:46.640" LastActivityDate="2018-12-24T05:01:50.323" Title="Selecting text on WebKit2" Tags="|vala|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13406" PostTypeId="1" CreationDate="2017-09-27T01:46:24.280" Score="2" ViewCount="318" Body="&lt;p&gt;Whenever I connect to my network, it connects fine for about 10-15 minutes until it still shows up as connected to the network in the upper-right corner but if I try to do anything that requires internet, it just doesn't work and says I'm not connected. Then after about 15 seconds, it pops up a notification saying I'm disconnected from the network. Please help me, I really just want to use my computer but I can barely do anything.&lt;/p&gt;&#xA;" OwnerUserId="12266" LastActivityDate="2019-12-10T13:02:00.580" Title="Wifi Issues with Elementary OS" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13408" PostTypeId="2" ParentId="13373" CreationDate="2017-09-27T10:55:10.370" Score="1" Body="&lt;p&gt;&lt;code&gt;Network Setting&lt;/code&gt; ==&gt; &lt;code&gt;Hotspot&lt;/code&gt; ==&gt; check the button &amp;amp; configure it (by giving a &lt;code&gt;name&lt;/code&gt; and &lt;code&gt;password&lt;/code&gt; u want) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;after that open &lt;code&gt;terminal&lt;/code&gt; &#xA;and write: &lt;code&gt;sudo scratch-text-editor /etc/NetworkManager/system-connections/Hotspot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find the string: &lt;code&gt;autoconnect=false&lt;/code&gt;&#xA;change it to: &lt;strong&gt;&lt;code&gt;autoconnect=true&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;save&lt;/strong&gt; and &lt;code&gt;reboot&lt;/code&gt; to test if it works &lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2017-09-27T10:55:10.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13409" PostTypeId="1" CreationDate="2017-09-27T12:34:38.120" Score="0" ViewCount="336" Body="&lt;p&gt;I get an error when  I try to download any apps from the terminal&#xA;and the app center or running &lt;code&gt;sudo apt-get update&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error message is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Type '&amp;lt;!DOCTYPE' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list&#xA;E: The list of sources could not be read.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12268" LastEditorUserId="12272" LastEditDate="2017-09-27T18:53:44.343" LastActivityDate="2023-12-12T17:04:45.633" Title="Cant install any apps from the terminal or the appcenter" Tags="|pantheon-terminal|appcenter|elementary-project|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13410" PostTypeId="2" ParentId="12174" CreationDate="2017-09-27T13:17:42.950" Score="0" Body="&lt;p&gt;You could try doing this via a sh script, then create a .desktop file as a launcher to add to plank. I've never done it myself, but that's where I would start&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In scratch create a new file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;!#/bin/bash&#xA;&#xA;wingpanel --toggle-indicator app-launcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;save the file as launcher.sh or whatever. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x launcher.sh &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...to make the sh executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then create your desktop file and save it to ~/.loca/share/applications or for all users /usr/share/applications. Make sure the file has a .desktop extension, e.g, launcher.desktop.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=App Launcher&#xA;Comment=Wingpanel Plank Launcher&#xA;Exec=/path/to/launcher.sh&#xA;Icon=/path/to/icon&#xA;Categories=Utility&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've never done this myself, but it's a place to start. And more fun than installing an app to do it for you!&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorDisplayName="user170" LastEditDate="2018-10-18T07:00:09.873" LastActivityDate="2018-10-18T07:00:09.873" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="13411" PostTypeId="1" AcceptedAnswerId="13412" CreationDate="2017-09-27T13:28:03.720" Score="1" ViewCount="106" Body="&lt;p&gt;I installed the gnome system monitor from the app center and was wondering how to create a keyboard shortcut to open it quickly&lt;/p&gt;&#xA;" OwnerUserId="12270" LastActivityDate="2017-09-27T14:12:49.370" Title="How to create a keyboard shortcut to run gnome-system-monitor" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13412" PostTypeId="2" ParentId="13411" CreationDate="2017-09-27T14:12:49.370" Score="1" Body="&lt;p&gt;Settings -&gt; keyboard -&gt; shortcuts -&gt; custom&lt;/p&gt;&#xA;" OwnerUserId="12201" LastActivityDate="2017-09-27T14:12:49.370" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13413" PostTypeId="2" ParentId="12060" CreationDate="2017-09-27T14:54:39.433" Score="0" Body="&lt;p&gt;As you can see, i have no problem and it works perfectly.&lt;/p&gt;&#xA;&lt;p&gt;For info: i had installed &lt;code&gt;wine wine1.6 wine1.6-amd64&lt;/code&gt; packages&lt;/p&gt;&#xA;&lt;p&gt;You can also check witch packages u have installed using &lt;code&gt;apt list --installed&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ctFOL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ctFOL.png&quot; alt=&quot;wine&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12262" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-09-28T11:34:01.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13416" PostTypeId="2" ParentId="13341" CreationDate="2017-09-27T16:34:21.840" Score="0" Body="&lt;p&gt;for some persons like said above:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key update&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;resolved the problem &lt;/p&gt;&#xA;&#xA;&lt;p&gt;for others: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;resolved the problem &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So try the first, if it doesn't resolve the problem try the second way &lt;/p&gt;&#xA;&#xA;&lt;p&gt;inform us ^^&lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2017-09-27T16:34:21.840" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13417" PostTypeId="2" ParentId="13409" CreationDate="2017-09-27T20:43:12.057" Score="0" Body="&lt;p&gt;The error message suggests you have a broken &lt;code&gt;medibuntu.list&lt;/code&gt; file. I would assume you have tried to add the Medibuntu repository at some point and something has gone wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to restore functionality in the terminal by removing that file with the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/medibuntu.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, if you run a &lt;code&gt;sudo apt update&lt;/code&gt; everything should be back to normal.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-09-27T20:43:12.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13419" PostTypeId="2" ParentId="11421" CreationDate="2017-09-28T08:22:40.943" Score="1" Body="&lt;p&gt;Had same problem for last two days after update.  Installed pavucontrol and selected the external soundcard through it instead of through settings.  Worked.&lt;/p&gt;&#xA;" OwnerUserId="12278" LastActivityDate="2017-09-28T08:22:40.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13420" PostTypeId="2" ParentId="13405" CreationDate="2017-09-28T10:08:00.670" Score="-1" Body="&lt;p&gt;Based on the response &lt;a href=&quot;https://stackoverflow.com/questions/46442869/how-to-get-selected-text-on-webkit2gtk&quot;&gt;here&lt;/a&gt;, I'm concluding that there is no direct way to interact with the DOM in WebKit2GTK. The work around is to use the following:&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Run a javascript function using WebView.run_javascript&lt;/li&gt;&#xA;&lt;li&gt;Within the javascript function, assign the result to document.title&lt;/li&gt;&#xA;&lt;li&gt;Fetch the results back using the WebView.get_title()&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;br/&gt;&lt;br/&gt;Seems a bit roundabout way, but it works.&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2017-09-28T10:08:00.670" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13423" PostTypeId="1" CreationDate="2017-09-28T22:30:30.180" Score="0" ViewCount="161" Body="&lt;p&gt;Says I need the correct plugin installed. Have installed Openvpn.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;David&lt;/p&gt;&#xA;" OwnerUserId="10238" LastActivityDate="2018-04-27T08:02:51.757" Title="VPN type - only PPTP - no VPN or Import option." Tags="|openvpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13424" PostTypeId="2" ParentId="13423" CreationDate="2017-09-28T23:00:01.567" Score="1" Body="&lt;p&gt;Found that the following created the relevant entry option - &#xA;sudo apt-get install network-manager-openvpn-gnome&lt;/p&gt;&#xA;" OwnerUserId="10238" LastActivityDate="2017-09-28T23:00:01.567" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13426" PostTypeId="2" ParentId="13327" CreationDate="2017-09-29T02:49:09.370" Score="1" Body="&lt;p&gt;Problem solved. I updated Plank from the PPA. The newer version has a fix.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Make window-manager aware that empty-trash dialog is part of plank&#xA;  (LP: #1652653)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2017/03/plank-0-11-4-eddy-released-how-to-install-it-via-ppa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Plank 0.11.4 “Eddy” Released! How to Install it via PPA&#xA;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5013" LastActivityDate="2017-09-29T02:49:09.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13427" PostTypeId="1" CreationDate="2017-09-29T11:05:18.280" Score="0" ViewCount="353" Body="&lt;p&gt;I'm a new user in elementary OS and I'm trying to use a shortcut which is a combination of &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;S&lt;/kbd&gt;, but when I press them it only produces &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;S&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &lt;/p&gt;&#xA;" OwnerUserId="12285" LastEditorUserId="14940" LastEditDate="2019-01-02T14:17:11.783" LastActivityDate="2024-02-22T00:07:55.933" Title="Can't Combine Ctrl Alt Shift" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="13428" PostTypeId="2" ParentId="13427" CreationDate="2017-09-29T11:25:35.480" Score="0" Body="&lt;p&gt;I am not in front of a computer right now, so I can't try. But see if you don't press &lt;kbd&gt;SHIFT&lt;/kbd&gt; if the &lt;kbd&gt;S&lt;/kbd&gt; is capital or not&lt;/p&gt;&#xA;" OwnerUserId="12201" LastEditorUserId="14940" LastEditDate="2019-01-02T15:17:46.170" LastActivityDate="2019-01-02T15:17:46.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13429" PostTypeId="2" ParentId="9963" CreationDate="2017-09-29T13:37:47.490" Score="1" Body="&lt;p&gt;You can boot from a liveusb and attempt to mount your partitions.&#xA;I you are prompted for a passphrase then It's encrypted. Just to be sure it was done correctly. :)&lt;/p&gt;&#xA;" OwnerUserId="12259" LastActivityDate="2017-09-29T13:37:47.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13433" PostTypeId="1" CreationDate="2017-09-30T03:04:34.220" Score="0" ViewCount="83" Body="&lt;p&gt;I am using the screenshot app that comes with elementary. Love it for its simplicity and works a treat, but I feel its missing a feature. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Namely, I would like the ability to take a screenshot based on user entered pixel dimensions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Quite often when developing websites you may wish to have pictures of a specific dimension, usually to cut down on page load speed and avoid generating unnecessary overhead. For instance I have a need at the moment for a bunch of images at 750px x 400px. Now I can take a screenshot at 1920 x 1080 and go into gimp and edit it down but its an extra step that adds time...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just one for the suggestion box ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;Matt&lt;/p&gt;&#xA;" OwnerUserId="12292" LastActivityDate="2019-08-26T14:02:35.367" Title="Screenshot app with option to take shots with specified pixel dimensions" Tags="|screenshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13434" PostTypeId="1" AcceptedAnswerId="13446" CreationDate="2017-09-30T06:09:34.290" Score="1" ViewCount="1613" Body="&lt;p&gt;Is there a way to make the plank behave like the Mac OS dock. What i mean by this is that when the active window is not maximized or not in full-screen mode, then the dock should act as if the hide dock behavior is disabled, But if the active window is maximized or in full-screen mode then the hide dock behavior activates. I don't want to use the Auto-hide or InteliHide behavior because this causes some apps to open and overlap the dock which its in a normal state (Not maximized).&lt;/p&gt;&#xA;" OwnerUserId="12254" LastActivityDate="2017-10-01T18:42:04.467" Title="Plank to behave like Mac OS dock" Tags="|plank|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13438" PostTypeId="1" CreationDate="2017-10-01T06:13:30.880" Score="2" ViewCount="282" Body="&lt;p&gt;So after the last update a few days ago I noticed that everything just had too much contrast (or exposure, I'm not sure), the text also looks weird and it's been a pain to look at. What do you guys think is it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Tis98.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tis98.png&quot; alt=&quot;PDF and Files&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It used to look like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/F7Q44.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F7Q44.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12304" LastActivityDate="2017-10-12T21:54:20.063" Title="Too much contrast/exposure? (I think)" Tags="|updates|display|graphics|laptop|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13439" PostTypeId="2" ParentId="13438" CreationDate="2017-10-01T13:50:28.347" Score="0" Body="&lt;p&gt;I few people have reported this issue recently. Have you tried using xrandr to adjust your gamma settings? If not try this...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --gamma 0.9:0.9:0.9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: eDP-1 is my monitor. Yours might be different. So substitute for whatever your monitor is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might have to play around with the settings to get it right. You'll also need to add this command to your start up. So that the settings will stick.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-01T13:50:28.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13440" PostTypeId="1" CreationDate="2017-10-01T14:23:20.917" Score="0" ViewCount="1229" Body="&lt;p&gt;I have followed the instructions on numerous other questions, but none of them work, how am I supposed to install pinyin (preferably google pinyin) on elementary os loki?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing fctix (and googlepinyin), enabling it in im-config, and restarting, I get this: (No input options nor a wing panel icon)&lt;a href=&quot;https://i.stack.imgur.com/VFowj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VFowj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried running im-config as sudo (separate restart), and purging both im-config and fctix and reinstalling.&lt;/p&gt;&#xA;" OwnerUserId="5871" LastEditorUserId="5871" LastEditDate="2018-05-21T09:33:34.900" LastActivityDate="2024-03-20T21:02:05.213" Title="Adding Chinese Input Loki" Tags="|release-loki|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13441" PostTypeId="1" AcceptedAnswerId="13480" CreationDate="2017-10-01T14:28:16.517" Score="0" ViewCount="1013" Body="&lt;p&gt;When I open files as administrator and try to open a text file as root to edit it, scratch does not open.  Wingpanel turns opaque as though scratch is maximized, but nothing displays. Eventually I get a message to force quit scratch. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;setting all of the scratch related gsettings to default.&lt;/li&gt;&#xA;&lt;li&gt;opening scratch using gksu in the terminal&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This is the output when I try to open it using the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;jesse@sp3:~$ gksu -d scratch-text-editor /etc/environment &#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;No ask_pass set, using default!&#xA;xauth: /tmp/libgksu-Yd2FDF/.Xauthority&#xA;STARTUP_ID: gksu/scratch-text-editor '|etc|environment'/4375-0-sp3_TIME344270&#xA;cmd[0]: /usr/bin/sudo&#xA;cmd[1]: -H&#xA;cmd[2]: -S&#xA;cmd[3]: -p&#xA;cmd[4]: GNOME_SUDO_PASS&#xA;cmd[5]: -u&#xA;cmd[6]: root&#xA;cmd[7]: --&#xA;cmd[8]: scratch-text-editor&#xA;cmd[9]: /etc/environment&#xA;buffer: -GNOME_SUDO_PASS-&#xA;brute force GNOME_SUDO_PASS ended...&#xA;Yeah, we're in...&#xA;[INFO 21:16:05.505659] Application.vala:153: Scratch version: 2.4.1&#xA;[INFO 21:16:05.505702] Application.vala:155: Kernel version: 4.13.4-041304- generic&#xA;[DEBUG 21:16:05.513498] Settings.vala:163: Loading settings from schema   'org.pantheon.scratch.saved-state'&#xA;[DEBUG 21:16:05.513978] Settings.vala:163: Loading settings from schema 'org.pantheon.scratch.settings'&#xA;[DEBUG 21:16:05.514871] Settings.vala:163: Loading settings from schema 'org.pantheon.scratch.services'&#xA;[WARNING 21:16:05.538065] [Gtk] Theme parsing error: apps.css:282:10: 'height' is not a valid property name&#xA;[WARNING 21:16:05.538155] [Gtk] Theme parsing error: apps.css:300:10: 'height' is not a valid property name&#xA;[WARNING 21:16:05.538256] [Gtk] Theme parsing error: apps.css:316:10: 'height' is not a valid property name&#xA;[WARNING 21:16:05.538303] [Gtk] Theme parsing error: apps.css:317:9: 'width' is not a valid property name&#xA;[WARNING 21:16:05.538390] [Gtk] Theme parsing error: apps.css:331:10: 'height' is not a valid property name&#xA;[WARNING 21:16:05.538426] [Gtk] Theme parsing error: apps.css:332:9: 'width' is not a valid property name&#xA;[DEBUG 21:16:05.553159] [Gtk] Connecting to session manager&#xA;[WARNING 21:16:05.559052] [libpeas] Failed to enable unknown plugin loader 'gjs'&#xA;[WARNING 21:16:05.563827] [libpeas] Failed to enable unknown plugin loader 'gjs'&#xA;[FATAL 21:16:05.709597] MainWindow.vala:523: Error opening directory '/root/.local/share/scratch-text-editor/unsaved': No such file or directory&#xA;[FATAL 21:16:05.709630] [Gtk] gtk_action_set_visible: assertion 'GTK_IS_ACTION (action)' failed&#xA;[DEBUG 21:16:05.711977] SplitView.vala:202: WelcomeScreen shown successfully&#xA;[DEBUG 21:16:05.715935] Settings.vala:163: Loading settings from schema 'org.pantheon.scratch.plugins.folder-manager'&#xA;[DEBUG 21:16:05.716338] MainWindow.vala:578: created 'unsaved' directory: /root/.local/share/scratch-text-editor/unsaved&#xA;[DEBUG 21:16:05.718868] SplitView.vala:210: WelcomeScreen hidden successfully&#xA;[DEBUG 21:16:05.720042] SplitView.vala:125: View added successfully&#xA;[DEBUG 21:16:05.723757] sql-schema.vala:204: schema_version is 10&#xA;[DEBUG 21:16:05.748192] Document.vala:747: Could not find mount location&#xA;[INFO 21:16:05.748287] Document.vala:167: Opening &quot;systemd-logind&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It looks like the Opening &quot;systemd-logind&quot; is what is causing it to hang, but I have no idea how to keep it from trying to open it.  There is nothing set to open by default in gsettings. &lt;/p&gt;&#xA;" OwnerUserId="12306" LastEditorUserId="12306" LastEditDate="2017-10-03T13:23:08.550" LastActivityDate="2017-10-04T11:43:19.597" Title="Unable to open scratch as root" Tags="|code|root|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13442" PostTypeId="1" CreationDate="2017-10-01T14:58:55.807" Score="3" ViewCount="2034" Body="&lt;p&gt;Is it possible to change the CPU throttling and governor in Loki? I have Elementary OS installed on a separate partition on my Windows 10 machine SSD drive. I have Chrome and Firefox and Thunderbird installed and nothing else and my fan is always kicking on and the laptop actually runs much hotter than when booted into Windows. Is it possible to adjust the CPU throttling or maybe change the governor type and settings at the kernel level? With only 3 applications installed, the fan is always kicking on regardless of whether I'm using it or not.&lt;/p&gt;&#xA;" OwnerUserId="12308" LastActivityDate="2024-03-30T19:05:05.593" Title="CPU throttle / governor / fan" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13443" PostTypeId="2" ParentId="13442" CreationDate="2017-10-01T15:24:01.617" Score="0" Body="&lt;p&gt;Yes you can either by configuring it through the terminal via&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install cpufrequtils&#xA;sudo cpufreq-set -r -g performance **or whatever you want to set it too (powersave, ondemand, etc)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or you can configure it through TLP if you have that installed. Instructions on that can be found here &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-configuration.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://linrunner.de/en/tlp/docs/tlp-configuration.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-02T15:52:04.413" LastActivityDate="2017-10-02T15:52:04.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13446" PostTypeId="2" ParentId="13434" CreationDate="2017-10-01T18:42:04.467" Score="2" Body="&lt;p&gt;I'm not familiar with how macOS's dock behaves, but it sounds like the behavior you're describing is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;By default, the dock is shown&lt;/li&gt;&#xA;&lt;li&gt;When no apps are maximized/fullscreened, windows don't ever automatically cover the dock (technically, the dock would not hide and would set struts, behaving like the hide mode is just turned off)&lt;/li&gt;&#xA;&lt;li&gt;When a window is maximized, hide the dock&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;To me this sounds like a relatively small (and probably good) modification to the existing &quot;dodge maximized window&quot; behavior, and is probably best suited for a bug filed against Plank: &lt;a href=&quot;https://bugs.launchpad.net/plank&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/plank&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2017-10-01T18:42:04.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13448" PostTypeId="2" ParentId="10010" CreationDate="2017-10-02T00:37:44.583" Score="1" Body="&lt;p&gt;Install the Firmware of Atheros (if your adapter is Atheros) and type this command in your terminal: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rmmod ath3k &amp;amp;&amp;amp; modprobe ath3k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12313" LastEditorUserId="578" LastEditDate="2017-10-04T06:40:27.037" LastActivityDate="2017-10-04T06:40:27.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13449" PostTypeId="2" ParentId="11345" CreationDate="2017-10-02T03:08:10.303" Score="0" Body="&lt;p&gt;I change between distros quite often (usually ubuntu based). I use the .deb install file from the citrix site (x86) version for my old HP. I initially struggled to get it working but with an SSL 61error (not 41) referencing the thawte certificates. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched the web and found the relevant certificate files there were two (Thawte_Premium_Server_CA). I downloaded these and saved them to my storage partition and whenever I change distros I just copy the two files into the following directories (/usr/share/ca-certificates/mozilla and /opt/Citrix/ICAClient/keystore/cacerts). Bit of a belt and braces approach maybe but it works everytime for me and I'm currently on elementary os loki.&lt;/p&gt;&#xA;" OwnerUserId="12316" LastActivityDate="2017-10-02T03:08:10.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13450" PostTypeId="1" CreationDate="2017-10-02T05:11:48.913" Score="1" ViewCount="380" Body="&lt;p&gt;I have tried various (almost all) nvidia proprietary drivers on my machine and vsync issue is still persisting.&#xA;Nouveau drivers in not an option as I want to SVP (&lt;a href=&quot;https://www.svp-team.com/wiki/Main_Page&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.svp-team.com/wiki/Main_Page&lt;/a&gt;) for playing videos which require nvidia proprietary drivers.&#xA;Please help if someone has sorted out this problem in Loki or any previous version of elementary OS.&#xA;Any advice will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="12025" LastActivityDate="2017-10-07T14:08:33.043" Title="Vsync issue with switchable graphics ( nvidia 630m / intel hd 3000) on elementary OS 0.4.1 Loki (64 bit)" Tags="|release-loki|display|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13451" PostTypeId="2" ParentId="13450" CreationDate="2017-10-02T05:52:15.647" Score="2" Body="&lt;p&gt;Assuming that you're &lt;strong&gt;using prime profiles and not bumblebee&lt;/strong&gt;, you're wanting primesync described here: &lt;a href=&quot;https://devtalk.nvidia.com/default/topic/957814/prime-and-prime-synchronization/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://devtalk.nvidia.com/default/topic/957814/prime-and-prime-synchronization/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To easily enable this in Loki, make sure that you have the latest OS updates and proprietary Nvidia drivers enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do the following steps from the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) &lt;code&gt;sudo nano /etc/modprobe.d/nvidia-graphics-drivers.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.) Change the line that says &lt;code&gt;&quot;nvidia-drm.modeset=0&quot;&lt;/code&gt; to &lt;code&gt;&quot;nvidia-drm.modeset=1&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.) Press Ctrl+x to exit and press &quot;y&quot; to indicate that you like to save your change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.) &lt;code&gt;sudo update-initramfs -u&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5.) Reboot your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These steps will enable primesync through the Nvidia proprietary drivers. If you have issues, just change modeset back to 0 and update your initramfs again!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Troubleshooting:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have further issues, you can try updating your intel graphics firmware for Skylake, Kabylake, or Broxton: &lt;a href=&quot;https://01.org/linuxgraphics/downloads/firmware&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://01.org/linuxgraphics/downloads/firmware&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're still having issues using the power-saving, intel GPU under the prime profiles, you can try changing your ACPI OS Interface string to make your bios/efi DSDT behave a little better under linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) &lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.) Change &lt;code&gt;GRUB_CMDLINE_LINUX=&quot;&quot;&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX=&quot;acpi_osi=&quot;&lt;/code&gt;&#xA;  If that doesn't work, try &lt;code&gt;GRUB_CMDLINE_LINUX=&quot;acpi_osi=! acpi_osi=\&quot;Windows 2009\&quot;&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.) &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.) Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When all else fails, reinstall your nvidia graphics package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt --reinstall install nvidia-(your version here: i.e. &quot;nvidia-375&quot;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Enjoy!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Reed&lt;/p&gt;&#xA;" OwnerUserId="10064" LastEditorUserId="12025" LastEditDate="2017-10-07T14:08:33.043" LastActivityDate="2017-10-07T14:08:33.043" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13453" PostTypeId="2" ParentId="13433" CreationDate="2017-10-02T10:30:05.197" Score="1" Body="&lt;p&gt;Use custom screenshot tool such as &lt;code&gt;Shutter&lt;/code&gt;. If you look in the preferences - You can predefine multiple settings like resolution and compression ratio.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how you can install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add repository by typing (in the terminal):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:shutter/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Followed by:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install shutter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="5569" LastActivityDate="2017-10-02T10:30:05.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13459" PostTypeId="1" AcceptedAnswerId="13555" CreationDate="2017-10-03T00:35:32.717" Score="3" ViewCount="349" Body="&lt;p&gt;So, I'm attempting to develop my first real app for Elementary after tinkering around a bit and getting comfortable with Vala and the Developers Guide tutorial. I've got my github repo up and building, and I've linked it with the App Center, but I'm not ready to publish it yet. I'm feeling good about what I've got so far, but I noticed a gap between the guide and what most people seem to do in their own apps, specifically build systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wasn't familiar with CMake, but followed the tutorial and it seems to make sense, but I see now that everyone is using Meson. I can't find a good source of tutorial/guide for Meson (and yes, I've followed the official tutorial and in-depth tutorial) to get me straightened out. I've looked through the Github repo for Harvey, and it seems much more complicated than expected. Does anyone have any suggestions for elementary OS dev w/ Meson?&lt;/p&gt;&#xA;" OwnerUserId="11985" LastEditorUserId="45" LastEditDate="2017-10-26T00:07:40.543" LastActivityDate="2018-12-05T21:19:25.120" Title="What are the essential things to know about using the Meson build system?" Tags="|cmake|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13460" PostTypeId="1" CreationDate="2017-10-03T12:00:16.283" Score="0" ViewCount="43" Body="&lt;p&gt;after using remina (RDP app) for a while in full screen mode ... the pulldown menu stops working in Loki .... I dont know if this is a remina or Loki bug or maybe something else entirely ... any ideas of what could be causing this or how to get the pulldown menu to continue to be responsive? additional information ... if I end the session and restart it ... it seems like the pulldown is again active ... for a while ... then again become unresponsive&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-10-03T12:06:25.230" Title="remina pulldown menu not present" Tags="|release-loki|apps|rdp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13461" PostTypeId="2" ParentId="13460" CreationDate="2017-10-03T12:06:25.230" Score="1" Body="&lt;p&gt;I use Remina ever day for work, and I have experienced this bug on occasion. What helps for me at least is to delete the connection, and then re-do it, and the bug should stay gone. I've only had it happen once or twice in the last few months.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And to make you feel better, I think it's a Remina bug, because this used to happen to me back when I used Xubuntu as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not optimal, but at least it's a usable workaround.&#xA;Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="11985" LastActivityDate="2017-10-03T12:06:25.230" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13462" PostTypeId="2" ParentId="13441" CreationDate="2017-10-03T12:21:21.397" Score="-1" Body="&lt;p&gt;OK it looks like it might be an issue with Pantheon itself. I suggest removing and then reinstalling Pantheon:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove pantheon&#xA;sudo apt install pantheon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference: &lt;a href=&quot;https://askubuntu.com/questions/684169/gtk-message-failed-to-load-module-pantheon-filechooser-module&quot;&gt;https://askubuntu.com/questions/684169/gtk-message-failed-to-load-module-pantheon-filechooser-module&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-03T12:21:21.397" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13469" PostTypeId="2" ParentId="12885" CreationDate="2017-10-03T17:34:28.483" Score="1" Body="&lt;p&gt;I had exactly the same problem on a T430 a year ago. I was going nuts until one of my colleagues calmly pointed out the little switch on the right hand side of the base. I slid this across and wifi sprang to life - essentially it wasn't clear which was was on and which was off. I cursed that I hadn't known about that a couple of hours earlier... There is a BIOS switch as well but that had been allowing wifi all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check &lt;a href=&quot;https://support.lenovo.com/gb/en/solutions/pd025182&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.lenovo.com/gb/en/solutions/pd025182&lt;/a&gt; for more details.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2017-10-03T17:34:28.483" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13473" PostTypeId="2" ParentId="13385" CreationDate="2017-10-03T18:30:38.257" Score="1" Body="&lt;p&gt;fixed!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to install SMBclient (I did it through synaptic package manager) once done you then have the option to look for a SMB shared printer in the printers app. &lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2017-10-03T18:30:38.257" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13475" PostTypeId="1" CreationDate="2017-10-03T20:28:23.983" Score="2" ViewCount="337" Body="&lt;p&gt;I'm having trouble connecting my school email to my Mail client (works fine for my personal), is this because of the university routing to their own system? It uses gmail but I have no idea how to figure out the IMAP settings to let me add it. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="12128" LastActivityDate="2018-09-11T13:01:19.323" Title="How to add school email to mail client?" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13480" PostTypeId="2" ParentId="13441" CreationDate="2017-10-04T11:43:19.597" Score="1" Body="&lt;p&gt;I managed to solve this by opening dconf editor as root (gksu dconf-editor) and then navigating to org/pantheon/scratch/settings  and setting &quot;focused-document-view1&quot; and &quot;opened-files-view1&quot; to default. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't realize there could be different settings for user and root. &lt;/p&gt;&#xA;" OwnerUserId="12306" LastActivityDate="2017-10-04T11:43:19.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13486" PostTypeId="2" ParentId="9735" CreationDate="2017-10-04T23:23:26.633" Score="1" Body="&lt;p&gt;I've made progress, done updates and used clamtk to neutralise the trojan that caused it. I think it came from an ad-spamming website hdeuropics, where I watched a frebbie movie, I went searching for every possible file it could have got to but went too far and destroyed my profile's system shared user files, meaning I couldn't log in. &#xA;I used terminal to find and obliterate all related trojan files, update system and cleaned it all up and it now logs in but then straight back out again on that profile. I can log into the admin profile and my son can log into his.&#xA;I could make a new profile and then maybe transfer the files to that. Unfortunately one of the folders has my registered user files for a game that I love so that's why I haven't made another profile, as you can't have 2 profiles with the same name. &#xA;I was thinking to chown the files then move them and then move them again to a new profile and chown them back again, it could work.&lt;/p&gt;&#xA;" OwnerUserId="2867" LastEditorUserId="2867" LastEditDate="2017-10-04T23:30:50.497" LastActivityDate="2017-10-04T23:30:50.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13488" PostTypeId="1" AcceptedAnswerId="13489" CreationDate="2017-10-04T23:35:28.540" Score="1" ViewCount="1004" Body="&lt;p&gt;I use several of JetBrains IDEs for software development (IntelliJ, CLion, PyCharm). After updating PyCharm one time, its Plank icon disappeared. Running the .sh file in the PyCharm/bin directory opened the program, but the right-clicking the icon did not produce the &quot;Keep in Dock&quot; option as normal. I fumbled around on the internet, but couldn't find any information for a fix. I tried using the answer provided &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/560/how-can-i-add-an-executable-file-to-the-dock&quot;&gt;here&lt;/a&gt;, but it didn't seem to do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I keep the shortcuts to my IDEs on the Plank?&lt;/p&gt;&#xA;" OwnerUserId="8741" LastActivityDate="2017-12-23T16:20:39.837" Title="How to add a JetBrains IDE to the Plank if &quot;Keep in Dock&quot; does not appear" Tags="|plank|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13489" PostTypeId="2" ParentId="13488" CreationDate="2017-10-04T23:41:32.590" Score="4" Body="&lt;p&gt;After installing another IDE from the JetBrains suite, I saw the installer mention that I could add the program to my Applications drawer by going to Tools &gt; Create Desktop Entry...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I can tell, this creates a .desktop entry with all the right information included. Doing that made it so I could then open the program, right-click on the icon in the Plank, and select &quot;Keep in Dock&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/220512/how-can-i-create-launcher-icon-for-phpstorm&quot;&gt;A similar solution&lt;/a&gt; from AskUbuntu.&lt;/p&gt;&#xA;" OwnerUserId="8741" LastActivityDate="2017-10-04T23:41:32.590" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13490" PostTypeId="2" ParentId="11770" CreationDate="2017-10-04T23:43:50.343" Score="0" Body="&lt;p&gt;I have a similar issue on freya which was caused by a trojan. I used clamtk to get rid of it but I accidentally wiped my user system share files by over-vigilance and couldn't load the profile at login. I'm looking for a way to restore that profiles ability to share the system files now.&#xA;I can enter login details on that profile but it won't load. It's my user profile, the admin works ok.  Did you change any system permissions when you installed it? It's definitely permissions for me. &lt;/p&gt;&#xA;" OwnerUserId="2867" LastEditorUserId="2867" LastEditDate="2017-10-04T23:48:53.177" LastActivityDate="2017-10-04T23:48:53.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13492" PostTypeId="2" ParentId="12282" CreationDate="2017-10-05T13:02:51.593" Score="0" Body="&lt;p&gt;What I recommend is creating a shell script and a .desktop file linking to the script. Then add the &quot;application&quot; to your startup via the System Settings. This way every time you log in the script is run and the gamma is set. It works perfectly for me. Here is an example of what I've done...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;create a new text file and add the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash/&#xA;&#xA;xrandr --output eDP-1 --gamma 0.70:0.70:0.70&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Play with the values to get the gamma to your liking. You can do this on the fly via the terminal. Save as gamma.sh or something like that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: eDP-1 refers to the monitor on my setup. To identify yours run: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then in the terminal navigate to the folder where your gamma.sh is saved and run the below command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x gamma.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the script as executable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you need to create a desktop file so we can add the script to your startup. Open a new text file and name it something like gamma.desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;add the following to the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Encoding=UTF-8&#xA;Name=Gamma Setter Application&#xA;Comment=A script to set gamma on monitor&#xA;Exec=/path/to/gamma.sh //obviously here you want to add the true path to your file&#xA;Icon=/path/to/icon.png //obviously here you want to add the true path to your icon file if you want one different from the base gear&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once that is done open System Settings &gt; Applications &gt; Startup (I think that's what it's called) and add your gamma setter application. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-05T15:17:06.833" LastActivityDate="2017-10-05T15:17:06.833" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13493" PostTypeId="1" AcceptedAnswerId="13518" CreationDate="2017-10-05T14:22:50.710" Score="0" ViewCount="339" Body="&lt;p&gt;My folders on the right are in polish (just like my whole system) but those on the left stay in english. How can I change those on the left to polish too?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zuAgK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zuAgK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changing the system language back to english and once more to polish doesn't change them.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-10-07T14:21:12.493" Title="Loki 0.4.1 - How to change home folders names on the left pane?" Tags="|release-loki|pantheon-files|language|folder|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13496" PostTypeId="1" CreationDate="2017-10-05T17:50:40.333" Score="2" ViewCount="3990" Body="&lt;p&gt;The next Ubuntu version is expected to be released in few days (the 17-10). This version will be the first to come back to gnome. It will mainly lean on wayland, even if x11 will remain, at leat for a while.&#xA;Wayland, seem to be the future. What about Pantheon? Is there a group working on this? What is the next version of Ubuntu that will be taken to release the next version of Elementary?&lt;/p&gt;&#xA;" OwnerUserId="12346" LastActivityDate="2017-10-08T16:22:49.590" Title="Pantheon and Wayland" Tags="|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13497" PostTypeId="2" ParentId="13496" CreationDate="2017-10-05T18:11:17.843" Score="0" Body="&lt;p&gt;The next release, Juno, will be based on 18.04. I can't answer the question about Wayland, I can only make assumptions, which I'd rather not do.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-05T18:11:17.843" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13498" PostTypeId="1" CreationDate="2017-10-06T01:31:29.210" Score="1" ViewCount="185" Body="&lt;p&gt;When I create a custom keyboard shortcut in Loki, where is that stored?&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2017-10-08T01:00:55.757" Title="Where are the keyboard shortcuts stored?" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ClosedDate="2017-10-25T06:49:25.163" ContentLicense="CC BY-SA 3.0" />
  <row Id="13499" PostTypeId="1" CreationDate="2017-10-06T03:55:40.880" Score="0" ViewCount="733" Body="&lt;p&gt;People, need help. I'm in the middle of a hectic work day and the system fonts just went haywire (try to read the browser's tab names)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JPJsP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JPJsP.jpg&quot; alt=&quot;haywire fonts&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There was no system update. I was using the browser and something like a white-flash happened. And, then I noticed nothing outside an application was readable. But everything rendered within an app was - like - text within Sublime Text, Chrome was all readable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things tried - &#xA;1. &lt;code&gt;fc-cache -f -v&lt;/code&gt; , followed by system reboot.&#xA;2. Followed through all the steps here hoping it was a font selection issue - &lt;a href=&quot;https://www.google.com/url?q=https%3A%2F%2Fseasonofcode.com%2Fposts%2Fhow-to-set-default-fonts-and-font-aliases-on-linux.html&amp;amp;sa=D&amp;amp;sntz=1&amp;amp;usg=AFQjCNGCK6sqN2TFVihJgZi7j1HCTT1gtQ&quot; rel=&quot;nofollow noreferrer&quot;&gt;fix default fonts&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I figure it probably was a font malfunction which I didn't have time to debug, so I switched to Ubuntu.&#xA;Leaving the question here for future users.&lt;/p&gt;&#xA;" OwnerUserId="12350" LastEditorUserId="12350" LastEditDate="2017-10-07T10:06:55.713" LastActivityDate="2019-01-02T20:05:54.443" Title="elementary OS system fonts haywire" Tags="|fonts|" AnswerCount="3" CommentCount="6" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13500" PostTypeId="1" CreationDate="2017-10-06T08:02:28.650" Score="2" ViewCount="968" Body="&lt;p&gt;This might be a silly question with an easy solution, but I've yet to find it.&#xA;I'm trying to set up my outlook calendar (from uni, has my classes and stuff) to sync with the calendar app on 0.4.1loki. I have it working great on my smartphone with IMAP, but no luck on my computer. Any ideas?&#xA;Thanks,&#xA;Ted&lt;/p&gt;&#xA;" OwnerUserId="6023" LastActivityDate="2017-11-01T03:36:09.317" Title="Sync outlook calendar with the calendar app" Tags="|release-loki|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13501" PostTypeId="2" ParentId="13499" CreationDate="2017-10-06T09:41:29.480" Score="-1" Body="&lt;p&gt;Did you do a system update before that happened? Unreadable fonts like that might be caused by kernel updates or update to &lt;code&gt;glibc&lt;/code&gt;-related libraries according to my experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to complete the update and do a reboot and check if the problem persists.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-10-06T09:41:29.480" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13502" PostTypeId="1" AcceptedAnswerId="13503" CreationDate="2017-10-06T10:12:03.427" Score="0" ViewCount="87" Body="&lt;p&gt;I've just installed matlab2017, it works and everything is fine but it isn't in my applications menu. I launched it using the terminal, but there is a way to have it between the applications?&#xA;the matlab launcher is &lt;code&gt;/home/paolo/bin/matlab&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6614" LastActivityDate="2017-10-06T12:26:44.933" Title="Launch Matlab not using command line" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13503" PostTypeId="2" ParentId="13502" CreationDate="2017-10-06T10:19:56.563" Score="1" Body="&lt;p&gt;Browsing the net I found this solution and now it works:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I launched using terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt install matlab-support&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and finally  Matlab is into my applications menu&lt;/p&gt;&#xA;" OwnerUserId="6614" LastActivityDate="2017-10-06T10:19:56.563" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13505" PostTypeId="2" ParentId="4816" CreationDate="2017-10-06T14:10:44.980" Score="0" Body="&lt;p&gt;The problem here is syslinux.  apt-get purge syslinux and extlinux, then re-run apt-get install -f and see if that fixes it, then put syslinux/extlinux back if you really need them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Caution: I'm figuring your system doesn't really REQUIRE those to be there, but maybe it does.  I don't want to render your system unbootable.  If you didn't put syslinux there on purpose maybe it came in as part of some other package dependency - boot disk creator or something like that.  Be careful, pay attention to what apt-get is telling you when it goes to remove it, and YMMV.&lt;/p&gt;&#xA;" OwnerUserId="12353" LastActivityDate="2017-10-06T14:10:44.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13507" PostTypeId="1" CreationDate="2017-10-06T20:19:30.930" Score="0" ViewCount="198" Body="&lt;p&gt;So I installed an mstata SSD in my laptop and installed elementary os. It works fine until I put my old hard drive back in. Even with nothing on the HD my system will not longer boot.&#xA;Any ideas how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="9433" LastActivityDate="2024-04-05T07:06:55.897" Title="Laptop won't boot elementary os" Tags="|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13508" PostTypeId="1" CreationDate="2017-10-06T20:25:16.963" Score="0" ViewCount="196" Body="&lt;p&gt;Re:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementaryos-0.4.1-stable.20170814.iso&lt;/li&gt;&#xA;&lt;li&gt;mac etcher-1.1.2.dmg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shasum zero[d] referenced image file, but elementary OS installer could not install grub correctly on the target USB drive, reporting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Missing OS&#xA;No bootable device -- insert boot disk and press any key&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It appears grub got installed on mac internal Hard Disk, even though elementary OS installer pointed it to USB drive.&#xA;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;einer &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/aroman/elementary-on-a-mac/tree/2017-updates&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;em&gt;reference&lt;/em&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12315" LastEditorUserId="14940" LastEditDate="2019-01-01T17:25:27.753" LastActivityDate="2024-01-06T05:06:50.750" Title="Missing OS on e OS mac USB install" Tags="|release-loki|system-installation|boot|grub|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13509" PostTypeId="2" ParentId="13508" CreationDate="2017-10-06T21:13:36.050" Score="0" Body="&lt;p&gt;Been there done that.&lt;br&gt;&#xA;First, did you have a current time machine? the MAC EFI (their improvement on BIOS) will see that and restore you to MACOS. Boot with super key (GOOGLE THAT) with the time machine drive plugged in and recover from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secondly, the MACOS and your data is probably still there, minus the boot instructions.  You will find that a local PC shop for a few $$ may be able to run 0101001010 recovery on the disk.  Elementary OS went to the USB drive and the boot loader went to the Local Disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thirdly, In order to dual boot or just boot elementary, the MAC EFI would need to be replaced with third party rEFInd &lt;a href=&quot;http://www.rodsbooks.com/refind/or&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rodsbooks.com/refind/or&lt;/a&gt; others' newer tool so that on boot up both MACOS and elementaryos disks can be found and will be boot choice.&lt;/p&gt;&#xA;" OwnerUserId="8257" LastActivityDate="2017-10-06T21:13:36.050" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13511" PostTypeId="1" AcceptedAnswerId="13512" CreationDate="2017-10-07T02:05:29.633" Score="2" ViewCount="571" Body="&lt;p&gt;I have Loki installed updated up to today (7-Oct-2017). My bluetooth cannot search any device recently and keep turning. The wingpanel and system setting both can turn on and off bluetooth but can never search any device nearby. Here is the output as requested in other posts:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;root@irvin-ElementaryOS:/# lspci -nnk|grep -iA2 net; lsusb; dmesg|egrep -i 'blue|firm'&#xA;02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723AE PCIe Wireless Network Adapter [10ec:8723]&#xA;    Subsystem: AzureWave RTL8723AE PCIe Wireless Network Adapter [1a3b:2114]&#xA;    Kernel driver in use: rtl8723ae&#xA;    Kernel modules: rtl8723ae, wl&#xA;03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)&#xA;    Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]&#xA;    Kernel driver in use: r8169&#xA;Bus 001 Device 002: ID 8087:8000 Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 002 Device 004: ID 13d3:3394 IMC Networks Bluetooth&#xA;Bus 002 Device 003: ID 046d:082d Logitech, Inc. HD Pro Webcam C920&#xA;Bus 002 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver&#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;[    0.147641] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored&#xA;[    3.930979] usb 2-7: Product: RT Bluetooth Radio&#xA;[    5.145277] Bluetooth: Core ver 2.21&#xA;[    5.145314] Bluetooth: HCI device and connection manager initialized&#xA;[    5.145323] Bluetooth: HCI socket layer initialized&#xA;[    5.145327] Bluetooth: L2CAP socket layer initialized&#xA;[    5.145335] Bluetooth: SCO socket layer initialized&#xA;[    5.203372] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin&#xA;[    5.231144] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200&#xA;[    5.231151] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin&#xA;[    6.338715] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    6.338721] Bluetooth: BNEP filters: protocol multicast&#xA;[    6.338728] Bluetooth: BNEP socket layer initialized&#xA;[   13.650764] Bluetooth: RFCOMM TTY layer initialized&#xA;[   13.650776] Bluetooth: RFCOMM socket layer initialized&#xA;[   13.650783] Bluetooth: RFCOMM ver 1.11&#xA;root@irvin-ElementaryOS:/#&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS is getting great!! Please help to make it better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="12333" LastActivityDate="2017-10-07T08:26:35.977" Title="Bluetooth cannot search detect any device" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13512" PostTypeId="2" ParentId="13511" CreationDate="2017-10-07T08:26:35.977" Score="2" Body="&lt;p&gt;I have to resize my Bluetooth window (Device search) for it to show an actual list of devices it sees. Heres to hoping the answer is just that simple.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-07T08:26:35.977" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13513" PostTypeId="2" ParentId="13507" CreationDate="2017-10-07T08:30:35.153" Score="0" Body="&lt;p&gt;It sounds to me like a BIOS boot priority if the only actual change is the presence of the drive. When you turn the machine on there should be an option to hit one of the F1-F12 keys mentioned on the boot screen. Hope this helps! Also, the bootloader that installed for me with Loki gives &quot;boot options&quot; on the list of possible devices.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-07T08:30:35.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13514" PostTypeId="1" AcceptedAnswerId="13524" CreationDate="2017-10-07T13:00:58.470" Score="1" ViewCount="1680" Body="&lt;p&gt;How to get a bluetooth tether to work?&#xA;I thought it was my old phone, but now I have a new one and it still does not work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can create a bluetooth connection to eOS from phone&#xA;I can create a tether from phone&#xA;I do not know how to connect&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It was working before with ubuntu Mate using another device (no longer in my possession)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Android 6&#xA;and Loki&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2022-07-02T09:37:55.077" Title="Bluetoooth Tether" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13518" PostTypeId="2" ParentId="13493" CreationDate="2017-10-07T14:21:12.493" Score="0" Body="&lt;p&gt;Try deleting the offending bookmarks and then recreate them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To delete:  Choose &quot;Remove&quot; from bookmark context menu, or just drag them out of the window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To recreate:  Show the home folder and then choose &quot;Bookmark&quot; from the folder context menu, or drag the folder onto the sidebar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When first created they will appear at the bottom of the list (above Trash) - just drag into the desired position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This assumes you have not changed the default user special directories (ie they are still in your home folder).   If you have changed them, just navigate to the appropriate places to recreate the bookmarks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also try renaming them using the bookmark context menu.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-10-07T14:21:12.493" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13519" PostTypeId="1" AcceptedAnswerId="13813" CreationDate="2017-10-07T14:47:18.607" Score="1" ViewCount="108" Body="&lt;p&gt;I'd like to disable only certain aspects for ALL notifications.  For example, I'd like to disable all Bubbles for notifications. It'd be nice to have a master switch for just that, but would like to leave Sounds on.&lt;/p&gt;&#xA;" OwnerUserId="12363" LastActivityDate="2017-11-02T12:15:12.137" Title="Is there a way to change Notification Settings globally?" Tags="|notifications|" AnswerCount="1" CommentCount="0" ClosedDate="2017-11-11T19:31:30.933" ContentLicense="CC BY-SA 3.0" />
  <row Id="13521" PostTypeId="1" AcceptedAnswerId="13529" CreationDate="2017-10-07T17:37:31.923" Score="1" ViewCount="80" Body="&lt;p&gt;The Scratch spell check extension does not work with some file extensions such as *.tex or *.php in elementary OS Loki. Is there a workaround for this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/myogx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/myogx.png&quot; alt=&quot;File with *.txt extension&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pkc5y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pkc5y.png&quot; alt=&quot;File with *.tex extension&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12365" LastActivityDate="2017-10-08T16:42:32.013" Title="Missing spell check in file extensions other than *.txt" Tags="|release-loki|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13522" PostTypeId="2" ParentId="12072" CreationDate="2017-10-07T21:38:37.070" Score="1" Body="&lt;p&gt;To add to above since I can't comment yet... You also have to fill out the description before the 'Add' button enables. It will have example text, but I thought it would just use that, so I kept trying different things and it wasted my time for no good reason. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the time of this writing, the minimum to trigger the 'Add' button (assuming http) is 'http://' in connection with one character in 'Description'. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I love EOS and the setup was still far easier than I've dealt with in the past, so not complaining, but to the devs - I feel like intuitiveness was overlooked a bit here. When I just see a grey 'http' and nothing else, I wonder, &quot;well, should I just enter an IP? If not, should I have a terminating /? Does it expect the port or can I just use the ip if the protocol is specified at the beginning?&quot; When I was trying 'ipp' it was the same; I was like, &quot;well do I need to do ipp://(ip)? or (ip address)/ipp?&quot; or &quot;ipp://(ip address)/ipp?&quot; - My point is, it definitely should not just be 'http' or 'ipp' and nothing else showing there. It should look near exactly what is expected for the end user.&lt;/p&gt;&#xA;" OwnerUserId="12366" LastActivityDate="2017-10-07T21:38:37.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13523" PostTypeId="2" ParentId="12790" CreationDate="2017-10-08T00:43:14.800" Score="0" Body="&lt;p&gt;eOS runs &quot;bluez&quot; can you find Bluetooth in system settings? if not what happens when you try &quot;sudo apt-get install bluez&quot; in the terminal?&#xA;For me, the Bluetooth window needs to be resized to show any devices while it is scanning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Always be careful when using sudo.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-08T00:43:14.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13524" PostTypeId="2" ParentId="13514" CreationDate="2017-10-08T00:56:16.997" Score="3" Body="&lt;p&gt;From what I understand you are looking to set up a PAN. Ubuntu is preloaded with features while eOS is minimalist. I believe what you are looking for is discussed &lt;a href=&quot;https://superuser.com/questions/1062962/can-i-see-my-bluetooth-connection-as-network-interface-in-linux&quot;&gt;here&lt;/a&gt; on superuser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;As you requested terminal scripts I found a GUI program that manages most all of this for you. It is old, but it works, as I am posting this via the Bluetooth from my iPhone 6s+.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get blueman (this guy uses bluez that we have already)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after installing the program, pair your device using the eOS built in manager:&#xA;[to be addressed in a moment, upload a pic on strong LTE via bluetooth is painful]&#xA;[&lt;img src=&quot;https://i.stack.imgur.com/q2F40.png&quot; alt=&quot;enter image description here&quot;&gt;]&lt;a href=&quot;https://i.stack.imgur.com/q2F40.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dont forget to verify on both the computer and phone.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/N7UKO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/N7UKO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;configure your phone to allow hotspot and ensure your phone is broadcasting its hotspot via Bluetooth as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;super&quot; + &quot;space&quot; will open app tray, type &quot;blue&quot; and you should see &quot;Bluetooth Manager&quot; in your options. Select this.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/SQHir.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SQHir.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should now see your paired device, right-click it and select the &quot;Network Access Point&quot; option.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xGg4T.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xGg4T.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;eOS should now give you a notification that you are now connected to the internet!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As there was a viable solution I outlined it here, unless other situations inhibit this, using the wifi-hotspot or usb-hotspot on your mobile will give you a faster networking experience. Attempting to upload these screenshots via Bluetooth tether failed a few times while USB tether was near instant.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the chance to help and learn a bit more about eOS and Linux!&lt;/p&gt;&#xA;" OwnerUserId="12359" LastEditorUserId="12359" LastEditDate="2017-10-09T09:31:02.390" LastActivityDate="2017-10-09T09:31:02.390" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13525" PostTypeId="2" ParentId="13498" CreationDate="2017-10-08T01:00:55.757" Score="0" Body="&lt;p&gt;I do not believe there is a GUI feature for this. It looks like someone with a similar question found a solution &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7889/use-macos-style-modifier-keys&quot;&gt;on this forum here.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-08T01:00:55.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13527" PostTypeId="1" CreationDate="2017-10-08T10:53:20.937" Score="0" ViewCount="625" Body="&lt;p&gt;I've just bought Lenovo Ideapad 320s-14ast with AMD A9-9420 and i want to install elementary as my first os here. But unfortunately it can't detect my touchpad and keyboard. I can't even just move my cursor and type something in keyboard so i can't install it. In GRUB they worked fine, though. Anybody knows the solution?&lt;/p&gt;&#xA;" OwnerUserId="12372" LastActivityDate="2019-04-14T15:00:55.373" Title="Touchpad &amp; keyboard not detected" Tags="|system-installation|keyboard|touchpad|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13528" PostTypeId="2" ParentId="13496" CreationDate="2017-10-08T16:22:49.590" Score="1" Body="&lt;p&gt;As said over there at &lt;a href=&quot;https://plus.google.com/112065052029635174180/posts/N7DKMUKaskH&quot; rel=&quot;nofollow noreferrer&quot;&gt;Google Plus&lt;/a&gt;, there are some blockers to rely mainly on Wayland, like &quot;no support of Struts for Wingpanel, need to create an alternative to libbamf for Plank&quot;. libbamf uses X, there is no Wayland alternative. I fear there will be no full support for Wayland in Juno, but there is a &lt;a href=&quot;https://www.bountysource.com/issues/48943977-wayland-design-window-communication-api&quot; rel=&quot;nofollow noreferrer&quot;&gt;BountySource&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-08T16:22:49.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13529" PostTypeId="2" ParentId="13521" CreationDate="2017-10-08T16:42:32.013" Score="0" Body="&lt;p&gt;There is no workaround. This is implemented in the &lt;a href=&quot;https://github.com/elementary/scratch/blob/master/plugins/spell/spell.vala#L106&quot; rel=&quot;nofollow noreferrer&quot;&gt;Spell plugin&lt;/a&gt; to deactivate Spell check in code files.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-08T16:42:32.013" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13530" PostTypeId="2" ParentId="13438" CreationDate="2017-10-08T16:49:45.097" Score="3" Body="&lt;p&gt;This seems to be a bug in Gala, see &lt;a href=&quot;https://github.com/elementary/gala/issues/100&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue Tracker&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-08T16:49:45.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13531" PostTypeId="1" AcceptedAnswerId="13532" CreationDate="2017-10-08T17:17:18.010" Score="6" ViewCount="721" Body="&lt;p&gt;I am using a custom Gtk+ stylesheet or custom icons and I am now encountering problems such as:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Transparent or illegible UI elements&lt;/li&gt;&#xA;&lt;li&gt;A missing image icon in the UI&lt;/li&gt;&#xA;&lt;li&gt;Panel icons that are enlarged or the wrong color&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;How can I resolve these problems?&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-10-08T17:17:18.010" Title="I've changed my system stylesheet or icons and things broke, now what?" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13532" PostTypeId="2" ParentId="13531" CreationDate="2017-10-08T17:17:18.010" Score="10" Body="&lt;p&gt;In general, changing these important system assets is not recommended. App developers consider the existence of system icons and stylesheet classes to be a given. There is no way to ensure quality or compatibility for third party assets. That said, you can:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Revert back to the stock stylesheet and icons&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You can always reset to the stock system configuration by opening up System Settings → About and selecting &quot;Restore Default Settings&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use the following Terminal command to reset the gsettings keys for the stylesheet and icons respectively:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.interface gtk-theme&#xA;gsettings reset org.gnome.desktop.interface icon-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;File an issue report for the custom assets&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;You can try reporting the issue to the designers/developers of the custom assets that you downloaded. They may have an issue tracker or a forum or other place where they accept feedback.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not file issue reports against elementary OS for problems with custom assets. There is nothing that elementary developers can do to fix assets distributed by 3rd parties.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Try to modify the assets yourself&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you have enabled the Gtk Inspector debug gsettings key, in many cases you can use Gtk Inspector to see what style classes or icon names that a specific widget is looking for. Using this information, you can copy those missing pieces from the stock assets to your custom assets. This will likely require some understanding of CSS stylesheets and may cause things to become even more broken if not done properly. &lt;strong&gt;It is not recommended to try this unless you really know what you're doing.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find the stock elementary icons at this location on your disk:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/icons/elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can find the stock elementary stylesheet at this location:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/themes/elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-10-08T17:17:18.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13534" PostTypeId="1" AcceptedAnswerId="13536" CreationDate="2017-10-08T17:29:52.910" Score="0" ViewCount="76" Body="&lt;p&gt;I'm moving from macOS to elementary OS and so far I already have most of the tools I use covered. There are some things still missing though, and one of them is the place where I keep passwords and other data like bank account logins and such. In the macOS keychain, secure notes can be stored.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a similar app available for elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="12375" LastEditorUserId="308" LastEditDate="2018-08-07T17:09:27.697" LastActivityDate="2018-08-07T17:09:27.697" Title="Storing notes securely" Tags="|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13535" PostTypeId="1" AcceptedAnswerId="14439" CreationDate="2017-10-08T17:52:29.367" Score="1" ViewCount="722" Body="&lt;p&gt;Applications menu loads slowly at first use (first boot). Then, at second use, it responds quickly at scrolling through apps. Is tit a bug or do I have a slow computer? 4 GB RAM, Quad-Core AMD A8-6410 APU with AMD Radeon R5 Graphics. It happened in Freya, too, same PC.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-01-16T14:34:05.180" Title="Applications menu slow" Tags="|release-loki|slingshot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13536" PostTypeId="2" ParentId="13534" CreationDate="2017-10-08T18:16:53.250" Score="1" Body="&lt;p&gt;There are quite a few password managers for linux. If you search on password in the App Center you'll see some good ones pop up. I use password gorilla myself. It's also cross platform (Mac and Win). As car as secure notes, what were you looking to have as far as features. There are a ton of web based ones. I use Google Keep, which can be used as a web app and act as a real application. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-08T18:16:53.250" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13537" PostTypeId="2" ParentId="7006" CreationDate="2017-10-08T23:45:06.560" Score="0" Body="&lt;p&gt;Nitrogen doesn't seem to work in elementary OS for some reason. Or should i say, the app itself works and you can set the different wallpapers, but then the configuration made in nitrogen doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i think a way to override the desktop settings in &quot;system settings&quot; to allow nitrogen to set the wallpapers is what is needed. unfortunately im looking for that solution myself...so far to no avail.&lt;/p&gt;&#xA;" OwnerUserId="12374" LastActivityDate="2017-10-08T23:45:06.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13538" PostTypeId="2" ParentId="13024" CreationDate="2017-10-09T07:21:15.307" Score="0" Body="&lt;p&gt;at folder where install.sh was extracted start the terminal and do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod a+x install.sh&#xA;sudo ./install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12377" LastActivityDate="2017-10-09T07:21:15.307" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13539" PostTypeId="2" ParentId="13527" CreationDate="2017-10-09T07:41:32.890" Score="1" Body="&lt;p&gt;I don't know a solution but I found some hints at &lt;a href=&quot;https://askubuntu.com/questions/948439/touchpad-not-detected-on-lenovo-ideapad-320-with-kubuntu-17-04&quot;&gt;AskUbuntu&lt;/a&gt;. Just try if something works for you.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-09T07:41:32.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13541" PostTypeId="1" CreationDate="2017-10-09T12:15:03.790" Score="1" ViewCount="65" Body="&lt;p&gt;When cliking on the &quot;network&quot; icon in the top bar / wingpanel, 3 sections are displayed:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Wired&lt;/li&gt;&#xA;&lt;li&gt;Wireless&lt;/li&gt;&#xA;&lt;li&gt;VPN&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My problem is that I see so many wireless networks that I can't actually see the VPN section, or not fully, as shown in the screenshot below (network names redacted for privacy).&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2YMLq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2YMLq.jpg&quot; alt=&quot;Screenshot of the issue: VPN section not fully visible&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I limit (or remove completely) the &quot;wireless networks&quot; section? I am using Loki.&lt;/p&gt;&#xA;" OwnerUserId="12379" LastEditorUserId="12379" LastEditDate="2017-10-09T12:30:53.090" LastActivityDate="2018-03-09T01:07:52.593" Title="How to limit the number of wireless networks listed in the wingpanel" Tags="|wingpanel|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13542" PostTypeId="1" CreationDate="2017-10-09T16:18:55.917" Score="1" ViewCount="2802" Body="&lt;p&gt;I have a serious issue that I don't understand. When I start my computer elementary won't open the graphical window to log in and instead it starts a tty terminal. To get the graphical login window I have to login in the tty and run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /etc/init.d/lightdm stop&#xA;sudo /etc/init.d/lightdm start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sometimes it takes a few minutes (about 2min max) before it shows the dock and the menu-bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't do anything to have this problem. Just some regular updates...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt; : thanks to @bigbang it's resolved by running this command : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12381" LastEditorUserId="12381" LastEditDate="2017-10-12T16:13:40.860" LastActivityDate="2023-12-13T06:05:20.597" Title="elementary os opens tty terminal at start" Tags="|release-loki|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13547" PostTypeId="1" CreationDate="2017-10-10T18:07:36.373" Score="4" ViewCount="1169" Body="&lt;p&gt;How to completely block access to the Internet directly, without OpenVPN?&#xA;All traffic must go through VPN connection, including DNS, TCP, UDP, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to prevent any leaks that may occur due to Internet reconnection or any other technical problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the original OpenVPN client.&#xA;Tell me please the most reliable solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I would like to know how to turn off the IPv6.&lt;/p&gt;&#xA;" OwnerUserId="12388" LastActivityDate="2019-01-02T08:01:00.187" Title="How to configure Internet access ONLY through OpenVPN connection" Tags="|networking|vpn|openvpn|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13548" PostTypeId="2" ParentId="12163" CreationDate="2017-10-10T18:35:53.110" Score="1" Body="&lt;p&gt;Resize your Bluetooth window (Device search) , it's probably the size of device list.&lt;/p&gt;&#xA;" OwnerUserId="12389" LastActivityDate="2017-10-10T18:35:53.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13549" PostTypeId="2" ParentId="13547" CreationDate="2017-10-10T21:01:50.910" Score="0" Body="&lt;h3&gt;Not an expert&lt;/h3&gt;&#xA;&lt;p&gt;You can use the VPN sections in the network settings menu to connect through an imported OpenVPN profile without the OpenVPN client.&lt;/p&gt;&#xA;&lt;p&gt;You can disable your IPv6 address in your router config usually ( 192.168.1.1 )&#xA;You can disable it in the network settings &amp;gt; advanced options &amp;gt; ipv6 settings tab as well for another security layer?&lt;/p&gt;&#xA;" OwnerUserId="12391" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-10-10T21:01:50.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13550" PostTypeId="1" AcceptedAnswerId="13551" CreationDate="2017-10-11T07:42:59.867" Score="0" ViewCount="497" Body="&lt;p&gt;I'm running elementary OS 0.4.1 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The emoji font I want to use system wide (in the OS and in the Browser) is the non-color version of Noto or: &lt;a href=&quot;https://github.com/googlei18n/noto-emoji/tree/master/fonts&quot; rel=&quot;nofollow noreferrer&quot;&gt;NotoEmoji-Regular.ttf&lt;/a&gt; (provided by Google)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I configure it to be default instead of &lt;a href=&quot;http://users.teilar.gr/~g1951d/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Symbola&lt;/a&gt; (which is the current default) ?&lt;/p&gt;&#xA;" OwnerUserId="6434" LastActivityDate="2017-11-10T09:09:41.317" Title="How do I configure the default emoji font to be used system-wide / in OS and Browser? (it's currently Symbola but I want Noto)" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13551" PostTypeId="2" ParentId="13550" CreationDate="2017-10-11T08:09:32.963" Score="0" Body="&lt;p&gt;One way to set Noto Emoji as the default emoji font in elementary OS is to setup some local font config files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create the directory and the file itself with:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;mkdir -p ~/.config/fontconfig/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;touch ~/.config/fontconfig/fonts.conf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And then populate the created file with the following text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;!DOCTYPE fontconfig SYSTEM &quot;fonts.dtd&quot;&amp;gt;&#xA;&#xA;&amp;lt;fontconfig&amp;gt;&#xA;  &amp;lt;match&amp;gt;&#xA;    &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;sans-serif&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;    &amp;lt;edit name=&quot;family&quot; mode=&quot;prepend&quot; binding=&quot;strong&quot;&amp;gt;&#xA;      &amp;lt;string&amp;gt;Noto Emoji&amp;lt;/string&amp;gt;&#xA;    &amp;lt;/edit&amp;gt;&#xA;  &amp;lt;/match&amp;gt;&#xA;  &amp;lt;match&amp;gt;&#xA;    &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;serif&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;    &amp;lt;edit name=&quot;family&quot; mode=&quot;prepend&quot; binding=&quot;strong&quot;&amp;gt;&#xA;      &amp;lt;string&amp;gt;Noto Emoji&amp;lt;/string&amp;gt;&#xA;    &amp;lt;/edit&amp;gt;&#xA;  &amp;lt;/match&amp;gt;&#xA;  &amp;lt;match&amp;gt;&#xA;    &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;monospace&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;    &amp;lt;edit name=&quot;family&quot; mode=&quot;prepend&quot; binding=&quot;strong&quot;&amp;gt;&#xA;      &amp;lt;string&amp;gt;Noto Emoji&amp;lt;/string&amp;gt;&#xA;    &amp;lt;/edit&amp;gt;&#xA;  &amp;lt;/match&amp;gt;&#xA;  &amp;lt;match&amp;gt;&#xA;    &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Apple Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;    &amp;lt;edit name=&quot;family&quot; mode=&quot;prepend&quot; binding=&quot;strong&quot;&amp;gt;&#xA;      &amp;lt;string&amp;gt;Noto Emoji&amp;lt;/string&amp;gt;&#xA;    &amp;lt;/edit&amp;gt;&#xA;  &amp;lt;/match&amp;gt;&#xA;&amp;lt;/fontconfig&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And finally flush the font cache: &lt;code&gt;fc-cache -f -v&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If Noto is installed you should now see Noto for emoji unicode blocks in the browser for example, and Symbola filling in where Noto is lacking.&lt;/p&gt;&#xA;" OwnerUserId="6434" LastActivityDate="2017-10-11T08:09:32.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13553" PostTypeId="1" CreationDate="2017-10-11T13:58:46.097" Score="0" ViewCount="1105" Body="&lt;p&gt;please, can anybody help me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get dist-upgrade&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;djordje@dj:~$ sudo apt-get dist-upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these.&#xA;The following packages have unmet dependencies:&#xA;appstream-data-pantheon-icons : Depends: appstream-data-pantheon but it is not installed&#xA;E: Unmet dependencies. Try using -f.&#xA;djordje@dj:~$ sudo apt-get -f install&#xA;Reading package lists... Done&#xA;Building dependency tree &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;appstream-data-pantheon-loki-stable appstream-data-pantheon-loki-stable-icons elementary-keyring&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following additional packages will be installed:&#xA;appstream-data-pantheon&#xA;The following NEW packages will be installed:&#xA;appstream-data-pantheon&#xA;0 upgraded, 1 newly installed, 0 to remove and 40 not upgraded.&#xA;36 not fully installed or removed.&#xA;Need to get 0 B/66,2 kB of archives.&#xA;After this operation, 74,8 kB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] &#xA;(Reading database ... 212677 files and directories currently installed.)&#xA;Preparing to unpack .../appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1.1_all.deb ...&#xA;Unpacking appstream-data-pantheon (0.3.0-0~14~ubuntu0.4.1.1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/appstream-data-pantheon_0.3.0-0~14~ubuntu0.4.1.1_all.deb (--unpack):&#xA;trying to overwrite '/usr/share/app-info/yaml/pantheon_xenial-extra_amd64.yml.gz', which is also in package appstream-data-pantheon-loki-stable 0.4+r13~ubuntu0.4.1&#xA;Processing triggers for appstream (0.11.3-1~elementary0.4.1) ...&#xA;AppStream cache update completed successfully.&#xA;Errors were encountered while processing:&#xA;/var/cache/apt/archives/appstreata-pantheon_0.3.0-0~14~ubuntu0.4.1.1_all.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)am-d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12398" LastEditorUserId="15702" LastEditDate="2018-12-28T13:46:41.207" LastActivityDate="2020-01-22T19:00:44.723" Title="I can' t update/upgrade or install anything" Tags="|release-loki|updates|software-installation|appcenter|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13554" PostTypeId="1" AcceptedAnswerId="13562" CreationDate="2017-10-11T15:07:15.613" Score="0" ViewCount="219" Body="&lt;p&gt;I have a i7 7700k&#xA;GTX 980 Gigabyte &#xA;Asus z170i pro gaming &#xA;16 GB DDR4 G.Skill Ram&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will my parts be compatible ? I know some Linux flavours dont offer support for new pc parts. &lt;/p&gt;&#xA;" OwnerUserId="12400" LastActivityDate="2017-10-20T22:23:15.267" Title="ElementaryOS compatible with my system?" Tags="|system-installation|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13555" PostTypeId="2" ParentId="13459" CreationDate="2017-10-11T16:14:36.813" Score="1" Body="&lt;p&gt;Meson is definitely something we're working towards in the future, but we haven't included it in the dev guide because we're still testing it and there are a couple of gaps. When we're sure that using Meson will be simpler and more streamlined than using CMake, we'll replace it in the guide. That said, Meson has great documentation on their website and I suggest starting with &lt;a href=&quot;http://mesonbuild.com/Tutorial.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;their tutorial&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/danrabbit/harvey/blob/master/meson.build&quot; rel=&quot;nofollow noreferrer&quot;&gt;Harvey's Meson&lt;/a&gt; has a few things that you might not need in your app like libm, gresources, gsettings schemas, and tests. I pushed a couple revisions just now with some simplications I learned recently, if you still would like to use it as a reference. Really the most important thing you need to build your app is this block:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;project('com.github.yourusername.yourapp', 'vala', 'c')&#xA;&#xA;executable(&#xA;    meson.project_name(),&#xA;    'src/Application.vala',&#xA;    'src/MainWindow.vala',&#xA;    dependencies: [&#xA;        dependency('glib-2.0'),&#xA;        dependency('gobject-2.0'),&#xA;        dependency('gtk+-3.0'),&#xA;    ],&#xA;    install: true&#xA;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the first line you declare your project name and the programming languages used (We need &lt;code&gt;c&lt;/code&gt; because Vala compiles down into C). Then in this next block we tell Meson that we want to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Build an executable binary file when we execute &lt;code&gt;ninja&lt;/code&gt; in Terminal and we're going to call it the same thing as our project name (&lt;code&gt;com.github.yourusername.yourapp&lt;/code&gt;) &lt;/li&gt;&#xA;&lt;li&gt;Include &lt;code&gt;src/Application.vala&lt;/code&gt; and &lt;code&gt;src/MainWindow.vala&lt;/code&gt; as the files we are compiling&lt;/li&gt;&#xA;&lt;li&gt;Use the dependencies listed in this array to compile our vala files. These are the minimum dependencies required for a Gtk+ app&lt;/li&gt;&#xA;&lt;li&gt;Install this executable to the appropriate location when we execute &lt;code&gt;ninja install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;With the above in a file called &lt;code&gt;meson.build&lt;/code&gt; you can open up Terminal and run &lt;code&gt;meson build --prefix=/usr&lt;/code&gt;, then &lt;code&gt;cd build&lt;/code&gt; and &lt;code&gt;ninja&lt;/code&gt; and that's all you really need to get an executable. Then to install &lt;code&gt;ninja install&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="45" LastEditorUserId="45" LastEditDate="2017-10-11T16:20:17.103" LastActivityDate="2017-10-11T16:20:17.103" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13557" PostTypeId="1" CreationDate="2017-10-11T19:05:22.680" Score="0" ViewCount="166" Body="&lt;p&gt;I am using an Alpha Litebook with Eos.  It was funcitoning well.  I tried to update the os via the application centre and it hung before finishing.  Once rebooted, all access to wifi dissappeared.  I am currently plugged i nto an ethernet cable.  When I open network settings, only ethernet shows.  when I click into edit connection, my last wifi connection shows, however there is no way to gain access to it to use.  when I click on the icon on the top of the screen, the only choice is wired.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;THanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mark&lt;/p&gt;&#xA;" OwnerUserId="12403" LastActivityDate="2024-03-26T22:05:20.637" Title="Lost access to wifi" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13559" PostTypeId="1" CreationDate="2017-10-11T20:23:00.923" Score="0" ViewCount="780" Body="&lt;p&gt;I installed Elementary O/S on my 2007 macbook, found it is very slow and the Built in browser does not work. Is there a version of Firefox or Chrome that work on this O/S ? I want to try this O/S on that old machine, but having a browser that will not connect to the internet. Otherwise it is useless.&lt;/p&gt;&#xA;" OwnerUserId="12406" LastActivityDate="2017-10-11T22:47:28.820" Title="Does Firefox or Chrome work on this O/S" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13560" PostTypeId="2" ParentId="13559" CreationDate="2017-10-11T20:41:09.307" Score="3" Body="&lt;p&gt;Yes, they both work great on elementary. I'm using the beta of Firefox Quantum without issue and both the stable and dev version of Chrome. Again, they both run great. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can download Firefox from the App Center. To install Chrome you can either install via:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb&#xA;sudo dpkg -i --force-depends google-chrome-stable_current_amd64.deb&#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or manually download the .deb file from the Chrome website and then in elementary install Eddy from the App Center to install the deb file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But honestly if you're trying to install this on a 2007 machine you might have some issues unless you go with something really lightweight. I would recommend Xubuntu or Lubuntu. Something that runs a lighter desktop.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-11T22:47:28.820" LastActivityDate="2017-10-11T22:47:28.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13561" PostTypeId="1" AcceptedAnswerId="13565" CreationDate="2017-10-11T22:05:42.050" Score="2" ViewCount="40" Body="&lt;p&gt;There are some bugreports on launchpad that were not transfered to github issues (&lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1693030&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; for example). &#xA;Were they filtered by some conditions or this is just a bug with transfer?&lt;/p&gt;&#xA;" OwnerUserId="9817" LastActivityDate="2017-10-12T10:42:56.260" Title="Not all pantheon-files issues transfered to github" Tags="|pantheon-files|github|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13562" PostTypeId="2" ParentId="13554" CreationDate="2017-10-12T05:47:50.267" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://www.linux.com/news/my-hardware-linux-compatible-find-out-here&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linux.com/news/my-hardware-linux-compatible-find-out-here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks as if Nvida supports GTX 980 on linux: &lt;a href=&quot;http://www.nvidia.com/Download/driverResults.aspx/77844/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.nvidia.com/Download/driverResults.aspx/77844/en-us&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found someone citing wifi issues with the onboard 22 months ago, hopefully, they have patched it by now:&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2311298&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2311298&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;same time frame, citing the same issue plus audio chip complications: &#xA;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=212999&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.linuxmint.com/viewtopic.php?t=212999&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some more digging (Google &quot;linux + chip in question&quot;) or the resources in the first link, may complete the rest of your question. I know the people behind linux are constantly working to make it as robust as possible, it is likely this has been patched since these posts almost 2 years ago.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-12T05:47:50.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13563" PostTypeId="2" ParentId="13541" CreationDate="2017-10-12T06:09:52.960" Score="1" Body="&lt;p&gt;There is no such functionality. But there is a bug over there at &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network/issues/23&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github&lt;/a&gt; which is similar. Please elaborate there your wishes as in the last comments here. Some of your ideas seems worth to discuss there.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-12T06:09:52.960" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13565" PostTypeId="2" ParentId="13561" CreationDate="2017-10-12T10:42:56.260" Score="1" Body="&lt;p&gt;The simple answer is that the tool that does the automatic import from Launchpad creates too many issues to fast and GitHub blocks it temporarily after a certain number. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, we do not want to blindly import bug reports that are likely to be out of date, unconfirmed etc.  The rate at which bugs can be addressed is extremely limited.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has been decided to manually import any remaining bountied bugs and close the Launchpad tracker now.  So any &quot;live&quot; bugs that have been missed will unfortunately have to be re-raised on GitHub.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-10-12T10:42:56.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13566" PostTypeId="2" ParentId="11921" CreationDate="2017-10-12T17:10:59.080" Score="0" Body="&lt;p&gt;I recommend setting a key binding to the two commands below. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To increase the brightness by 10% use &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -inc 10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and to decrease by 10% use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -dec 10 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-12T17:10:59.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13568" PostTypeId="2" ParentId="13438" CreationDate="2017-10-12T21:54:20.063" Score="0" Body="&lt;p&gt;I once installed Intel drivers in a desperate attempt to improve my battery life (it didn't work, by the way). Apparently that seems to be related. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downgrading to the original drivers solved the problem. It took me a while to find the right way to do it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/531540/how-to-safely-remove-proprietary-intel-driver&quot;&gt;https://askubuntu.com/questions/531540/how-to-safely-remove-proprietary-intel-driver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5910" LastActivityDate="2017-10-12T21:54:20.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13569" PostTypeId="1" CreationDate="2017-10-12T22:24:43.607" Score="0" ViewCount="5986" Body="&lt;p&gt;The Email client included will not connect to Gmail if you have two factor authentication turned on. I says the account or password is wrong. Normally on other clients, a second screen comes up, and then I get a message on my Cell Phone.&lt;/p&gt;&#xA;" OwnerUserId="12405" LastActivityDate="2018-02-19T16:48:44.153" Title="Email client Gmail" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2017-10-25T06:09:05.860" ContentLicense="CC BY-SA 3.0" />
  <row Id="13571" PostTypeId="2" ParentId="13542" CreationDate="2017-10-13T11:13:39.607" Score="0" Body="&lt;p&gt;You can try to resolve the problem by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Perhaps there is a confusion between display managers. To show the current one, type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/X11/default-display-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For other solutions, you have to investigate further.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-13T11:13:39.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13572" PostTypeId="2" ParentId="13569" CreationDate="2017-10-13T11:51:52.923" Score="2" Body="&lt;p&gt;I ran into a similar issue. I think you are experiencing two problems simultaneously.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first problem relates to Mail not meeting Google's standards for security. The only way I've found to get it to work was to &quot;Allowing less secure apps to access your account&quot; a way to do that can be found &lt;a href=&quot;https://support.google.com/accounts/answer/6010255?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;here.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second problem, I assume, you're having is you're attempting to set up a Gmail account via the Gmail option from the pull down menu. I've never gotten Gmail to set up properly that way. You'll need select the &quot;Other&quot; option, I believe it is, and set up the account manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The server settings should be mail.gmail.com &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2018-02-19T16:48:44.153" LastActivityDate="2018-02-19T16:48:44.153" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13573" PostTypeId="2" ParentId="1638" CreationDate="2017-10-13T15:55:22.987" Score="0" Body="&lt;p&gt;Hoping that I can provide some answers for other who were in my situation trying to get HiDPI monitors auto scaling correctly. At work I use a 2015 MacBook Pro with some 2K monitors and was experiencing the buttons being cut off when I used the Gnome-Tweak-Tools to set my scaling factor. This worked but I had to manually set the scale whenever I moved connected or disconnected my laptop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Experimenting a bit I found a setup that worked perfectly for me using Daniel's explanation. This solution automatically scales the laptop accordingly based on the monitors connected (so I can see the HiDPI scaled 2x) and also brought back the missing buttons.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[~] gsettings get org.gnome.settings-daemon.plugins.xsettings overrides&#xA;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&#xA;&#xA;[~] gsettings get  org.gnome.desktop.interface scaling-factor&#xA;uint32 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Setting the scaling-factor to zero is the default which should preform auto scaling for you. If you've been manually adjusting scaling like I have, just double check this. Hopefully I've included enough keywords to help people who might have been seeing this issue on HiDPI screens.&lt;/p&gt;&#xA;" OwnerUserId="12338" LastActivityDate="2017-10-13T15:55:22.987" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13574" PostTypeId="1" CreationDate="2017-10-13T17:03:40.957" Score="2" ViewCount="348" Body="&lt;p&gt;I have a Lenovo Z51-70 with Intel integrated graphics and an AMD R9 M375X. I have several GPU related questions:&#xA;What kind of drivers do I have to install?&#xA;Where from?&#xA;How can I set which GPU is used?&#xA;Thanks in advance &lt;/p&gt;&#xA;" OwnerUserId="12417" LastActivityDate="2024-03-18T23:09:51.303" Title="Laptop with hybrid GPUs" Tags="|amd|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13578" PostTypeId="1" AcceptedAnswerId="13581" CreationDate="2017-10-14T20:36:39.770" Score="2" ViewCount="847" Body="&lt;p&gt;i am using 0.4.1 loki, and every time the PC awake its bluetooth is turned on. Is there a way to completely disable bluetooth?&lt;/p&gt;&#xA;" OwnerUserId="12429" LastActivityDate="2017-10-15T16:20:14.377" Title="Q: Bluetooth automatically turns on" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13579" PostTypeId="2" ParentId="7854" CreationDate="2017-10-15T12:10:47.940" Score="0" Body="&lt;p&gt;Having no software center and not being able to get Synaptic Package Manager is like having arms and legs chopped off. We don't all use phones for Internet, quite a lot of serious users use a desktop. What's the point of having to mess with terminal to get the things that you need after installation?&#xA;I have to go back to Ubuntu until I find an opsys I am happy with. The things I like are pantheon look and the old Midori. I shall miss those&lt;/p&gt;&#xA;" OwnerUserId="2867" LastActivityDate="2017-10-15T12:10:47.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13581" PostTypeId="2" ParentId="13578" CreationDate="2017-10-15T16:20:14.377" Score="2" Body="&lt;p&gt;You can disable bluetooth using the following command in terminal&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo rfkill block bluetooth&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To disable it completely, run the following command in terminal&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo scratch-text-editor /etc/rc.local&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Add &quot;&lt;strong&gt;sudo rfkill block bluetooth&lt;/strong&gt;&quot; command to the line before last. This command will run during start-up of os automatically to disable bluetooth every time you start the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To re-enable bluetooth run the following command in terminal&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo rfkill unblock bluetooth &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;And also delete the line added in the rc.local file.&lt;/p&gt;&#xA;" OwnerUserId="12433" LastActivityDate="2017-10-15T16:20:14.377" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13582" PostTypeId="1" CreationDate="2017-10-15T19:41:18.903" Score="0" ViewCount="462" Body="&lt;p&gt;I am able to add a signature to each of my accounts, but since I want to use mail for my work email.  I need to add 2 images to my signature.  Ctrl + G doesn't seem to do anything in there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to do this?&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2024-03-15T09:04:00.453" Title="Add images to signature in Mail" Tags="|release-loki|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13583" PostTypeId="1" CreationDate="2017-10-15T20:51:11.623" Score="0" ViewCount="2176" Body="&lt;p&gt;trying to get Gnome Software Center going on a fresh install of Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the error I am getting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install gnome-software&#xA;Reading package lists... Done&#xA;Building dependency tree&#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA;gnome-software : Depends: appstream but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Googled around a bit, found a potential solution, that didn't work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt policy appstream&#xA;appstream:&#xA;Installed: 0.11.3-1~elementary0.4.1&#xA;Candidate: 0.11.3-1~elementary0.4.1&#xA;&#xA;Version table:&#xA;*** 0.11.3-1~elementary0.4.1 999&#xA;999 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 Packages&#xA;100 /var/lib/dpkg/status&#xA;0.10.6-1~ubuntu16.04.2 100&#xA;100 http://us.archive.ubuntu.com/ubuntu xenial-backports/main amd64 packages&#xA;0.9.4-1ubuntu3 500&#xA;500 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages&#xA;0.9.4-1 500&#xA;500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages&#xA;&#xA;$ sudo apt install appstream=0.10.3-1~ubuntu16.04~ppa2&#xA;Reading package lists... Done&#xA;Building dependency tree&#xA;Reading state information... Done&#xA;E: Version '0.10.3-1~ubuntu16.04~ppa2' for 'appstream' was not found**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have no idea idea what to do now. This is about my ninth day on Linux coming from Windows, go easy. &lt;/p&gt;&#xA;" OwnerUserId="12435" LastActivityDate="2024-03-14T02:02:25.267" Title="Installing Gnome Software Center on Loki" Tags="|software-installation|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13584" PostTypeId="2" ParentId="12017" CreationDate="2017-10-15T21:57:43.910" Score="0" Body="&lt;p&gt;Here is how I have my Office365 work email setup.  Adding a signature is optional and not required in any way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6Jvay.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6Jvay.jpg&quot; alt=&quot;Office365 Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2017-10-15T21:57:43.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13585" PostTypeId="2" ParentId="13475" CreationDate="2017-10-15T22:05:35.820" Score="1" Body="&lt;p&gt;Just selecting gmail as your provider should just work not problem.  See below for settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uKmfi.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uKmfi.jpg&quot; alt=&quot;Gmail Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2017-10-15T22:05:35.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13586" PostTypeId="2" ParentId="13475" CreationDate="2017-10-15T23:07:49.337" Score="1" Body="&lt;p&gt;You'll need to add the account as &quot;Other&quot; not &quot;Gmail&quot;. Then you'll have to enter all the relevant information using the image below as a template. Be sure to set the servers for gmail accordingly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KUBMb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KUBMb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-15T23:07:49.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13587" PostTypeId="2" ParentId="13583" CreationDate="2017-10-16T00:41:05.030" Score="0" Body="&lt;p&gt;On this output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Version table:&#xA;*** 0.11.3-1~elementary0.4.1 999&#xA;999 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial/main amd64 Packages&#xA;100 /var/lib/dpkg/status&#xA;0.10.6-1~ubuntu16.04.2 100&#xA;100 http://us.archive.ubuntu.com/ubuntu xenial-backports/main amd64 packages&#xA;0.9.4-1ubuntu3 500&#xA;500 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages&#xA;0.9.4-1 500&#xA;500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 Packages&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems not to include the version you're trying to install (&lt;code&gt;0.10.3-1~ubuntu16.04~ppa2&lt;/code&gt;). You can try one of these:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;0.11.3-1~elementary0.4.1&lt;/li&gt;&#xA;&lt;li&gt;0.10.6-1~ubuntu16.04.2&lt;/li&gt;&#xA;&lt;li&gt;0.9.4-1ubuntu3&lt;/li&gt;&#xA;&lt;li&gt;0.9.4-1&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I would suggest trying to install the latest ones first but installing very old packages might break other packages you have installed in your system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If all of the packages above have failed, either the issue in upstream Ubuntu hasn't been resolved yet or there are core packages that have incompatibilities with &lt;code&gt;gnome-software-center&lt;/code&gt;. If that's the case, you might have to live without &lt;code&gt;gnome-software-center&lt;/code&gt; for now until the package maintainers release a fix. (Elementary's default AppCenter is a nice alternative)&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-10-16T00:41:05.030" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13590" PostTypeId="2" ParentId="9582" CreationDate="2017-10-16T07:58:27.007" Score="1" Body="&lt;p&gt;As mentioned in the steps in the thread you linked, the following commands can revert to the default cursor theme by changing the themename.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface cursor-theme elementary&#xA;&#xA;sudo update-alternatives --install /usr/share/icons/default/index.theme x-cursor-theme /usr/share/icons/elementary/cursor.theme 21&#xA;&#xA;sudo update-alternatives --set x-cursor-theme /usr/share/icons/elementary/cursor.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;These three commands will revert these changes. You may need to reboot for these changes to take effect.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastEditorDisplayName="user9220" LastEditDate="2019-01-10T09:23:23.633" LastActivityDate="2019-01-10T09:23:23.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13591" PostTypeId="1" CreationDate="2017-10-16T11:50:51.290" Score="0" ViewCount="53" Body="&lt;p&gt;I have used my Deskjet 3520 printer on Elementary OS in the past - I don't print frequently so the OS will have had update patches applied (0.4.1 Loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the printer connected via USB to remove wifi from the equation. The printer is functional from another PC, I've tried rebooting, removing and re-adding the printer.&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2019-04-10T01:00:35.447" Title="HP 3520 has stopped working. Which print service does eOS use?" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13592" PostTypeId="2" ParentId="13591" CreationDate="2017-10-16T11:50:51.290" Score="1" Body="&lt;p&gt;Running the following resolved it for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install hplip --reinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also removed and re-added the printer in System Settings. When selecting the driver via the add printer wizard, ts easy to miss that the right hand driver pane is scrollable so I think I may have previously been selecting the incorrect driver. There is a driver for the 3520 series further down the list&lt;/p&gt;&#xA;" OwnerUserId="6983" LastActivityDate="2017-10-16T11:50:51.290" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13593" PostTypeId="2" ParentId="13582" CreationDate="2017-10-16T12:02:42.807" Score="0" Body="&lt;p&gt;I encountered this same issues/desire and did manage to achieve a satisfactory result for my work email by using the 'use HTML signature' option in the settings dialogue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have included my signature 'code' below that I used (personal details redacted) in case it is helpful. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One important point is that you will need to find a version of the image file hosted online that you want to use for your email. If your company uses Gmail for corporate email this is easy, as it will be (most likely) hosted somewhere on the public google 'drive' for your company, but if your company doesn't have a publicly accessible space on your server where the image is located you could always host it yourself somewhere and link to that file in your signature code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It ends up looking like the image attached here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aADMz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aADMz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;div style=&quot;white-space:normal&quot;&amp;gt;&#xA;&amp;lt;p style=&quot;margin-bottom:0cm;border:none;padding:0cm;text-transform:uppercase;letter-spacing:1pt&quot;&amp;gt;&#xA;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:11pt&quot; size=&quot;3&quot;&amp;gt;&amp;lt;b&amp;gt;&amp;lt;font color=&quot;#009078&quot;&amp;gt;Jos Henson&amp;lt;/font&amp;gt;&amp;lt;/b&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm;text-transform:uppercase;letter-spacing:1pt;margin-top:5px;margin-bottom:10px&quot;&amp;gt;&#xA;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;b&amp;gt;&amp;lt;font color=&quot;#a0a0a0&quot;&amp;gt;International Investor Relations&amp;lt;br&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/b&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;table cellspacing=&quot;0&quot; cellpadding=&quot;0&quot; width=&quot;558&quot; height=&quot;93&quot;&amp;gt;&#xA;&amp;lt;colgroup&amp;gt;&#xA;&amp;lt;col width=&quot;109*&quot;&amp;gt; &#xA;&amp;lt;col width=&quot;147*&quot;&amp;gt;&#xA;&amp;lt;/colgroup&amp;gt;&#xA;&amp;lt;tbody&amp;gt;&#xA;&amp;lt;tr valign=&quot;top&quot;&amp;gt;&#xA;&amp;lt;td style=&quot;border:none;padding:0cm&quot; width=&quot;43%&quot;&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm&quot;&amp;gt;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm;margin-top:0px&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&#xA;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;a style=&quot;text-decoration:none;color:#b2b2b2&quot; href=&quot;tel:+421%20919%20225%20628&quot; value=&quot;+421919225628&quot; target=&quot;_blank&quot;&amp;gt;+421 919 225 628&amp;lt;/a&amp;gt; &#xA;&amp;lt;br&amp;gt;&#xA;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&#xA;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;span style=&quot;text-decoration:none;&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;a style=&quot;text-decoration:none;color:#b2b2b2&quot; href=&quot;mailto:j.henson@zltymelon.sk&quot; target=&quot;_blank&quot;&amp;gt;j.henson@zltymelon.sk&amp;lt;/a&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/font&amp;gt;&#xA;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;br&amp;gt;&#xA;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&#xA;&amp;lt;span style=&quot;text-decoration:none;&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;a style=&quot;text-decoration:none;color:#b2b2b2&quot; href=&quot;http://www.zltymelon.com&quot; target=&quot;_blank&quot; &amp;gt;www.zltymelon.com&amp;lt;/a&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;span&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm;font-weight:normal&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm&quot;&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm&quot;&amp;gt;&amp;lt;span&amp;gt;&amp;lt;img src=&quot;~~https://ci6.googleusercontent.com/proxy/ViudISRIsqWTahqLqSj_P9WRDiw6JONkQbL75CvFXE5JB-pjnr_BMJhsrJHqQ5WTyNzR8c-FT1WRGh8Cw2vBiKNVLnFQYfsqmKWRsIQZzAnJ71CLXgabktfroe50Fel6_cQKhlNodq8WOkW34WtU=s0-d-e1-ft#https://docs.google.com/a/zltymelon.sk/uc?id=0BztgNOLiYfWBampNNFF0bHlSUDg&amp;amp;amp;export=download~~&quot;&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm&quot;&amp;gt;&amp;lt;span&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;    &#xA;&amp;lt;td style=&quot;border:none;padding:0cm&quot; width=&quot;57%&quot;&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm;margin-top:0px&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm&quot;&amp;gt;&amp;amp;nbsp;&amp;lt;/span&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;span&amp;gt;&amp;lt;/span&amp;gt;&#xA;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm;&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;iService a.s.&amp;lt;br&amp;gt;&#xA;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&#xA;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;span style=&quot;text-decoration:none;&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;Strakova 1,&amp;amp;nbsp; Bratislava&amp;amp;nbsp; 811 01,&amp;amp;nbsp; Slovakia&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/font&amp;gt;&#xA;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;br&amp;gt;&#xA;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;span style=&quot;text-decoration:none;&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;a style=&quot;text-decoration:none;color:#b2b2b2&quot; href=&quot;tel:+421%202/544%20100%2084&quot; value=&quot;+421254410084&quot; target=&quot;_blank&quot;&amp;gt;+421 2 544 100 84&amp;lt;/a&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm;font-weight:normal&quot;&amp;gt;&amp;lt;font face=&quot;Oswald&quot;&amp;gt;&amp;lt;font style=&quot;font-size:8pt&quot; size=&quot;1&quot;&amp;gt;&amp;lt;font color=&quot;#b2b2b2&quot;&amp;gt;&amp;lt;span style=&quot;display:inline-block;border:none;padding:0cm&quot;&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/font&amp;gt;&amp;lt;/p&amp;gt;&#xA;&amp;lt;p style=&quot;border:none;padding:0cm&quot;&amp;gt;&amp;lt;span&amp;gt;&amp;lt;br&amp;gt;&amp;lt;/span&amp;gt;&amp;lt;/p&amp;gt;                            &#xA;&#xA;&amp;lt;/td&amp;gt;   &#xA;&#xA;&amp;lt;/td&amp;gt;&#xA;&#xA;&amp;lt;/tr&amp;gt;&#xA;&amp;lt;/tbody&amp;gt;&#xA;&amp;lt;/table&amp;gt;&#xA;&amp;lt;/div&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11726" LastActivityDate="2017-10-16T12:02:42.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13594" PostTypeId="2" ParentId="11991" CreationDate="2017-10-16T13:10:54.743" Score="0" Body="&lt;p&gt;Visual Studio Code is also a good option for C/C++/C#...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://code.visualstudio.com/docs/languages/csharp&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.visualstudio.com/docs/languages/csharp&lt;/a&gt;&#xA;&lt;a href=&quot;https://code.visualstudio.com/docs/languages/cpp&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.visualstudio.com/docs/languages/cpp&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install the .deb package file here: &lt;a href=&quot;https://code.visualstudio.com/Download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.visualstudio.com/Download&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be sure to install Eddy from the App Center first to allow for the install of .deb packages. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-16T13:28:05.197" LastActivityDate="2017-10-16T13:28:05.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13595" PostTypeId="2" ParentId="13052" CreationDate="2017-10-16T13:59:12.523" Score="0" Body="&lt;p&gt;From gxg's help the command is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter overlay-key &quot; &quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change it to empty space:&quot; &quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used &lt;code&gt;dconf-editor&lt;/code&gt; to check the value of &lt;code&gt;org.gnome.mutter overlay-key&lt;/code&gt; and found it was &lt;code&gt;Super_L&lt;/code&gt; from the answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11300/super-s-how-do-i-change-this?rq=1&quot;&gt;linked here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Dconf-editor&lt;/code&gt; can also be used to change the value.&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2017-10-16T13:59:12.523" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13596" PostTypeId="1" AcceptedAnswerId="13599" CreationDate="2017-10-16T14:07:55.837" Score="0" ViewCount="202" Body="&lt;p&gt;I just read about the Krack attack, which describes a weakness in the WPA2 protocol that impacts almost all devices that use WiFi. &#xA;More info: &#xA;&lt;a href=&quot;https://www.krackattacks.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.krackattacks.com/&lt;/a&gt;&#xA;&lt;a href=&quot;https://github.com/kristate/krackinfo&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/kristate/krackinfo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I know whether ElementaryOS (or Ubuntu LTS) is patched and/or when a patched will be released? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I'm already using a vpn service to protect myself)&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-16T17:01:04.417" Title="Krack attack security updates?" Tags="|wifi|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13598" PostTypeId="1" CreationDate="2017-10-16T18:22:53.487" Score="0" ViewCount="1434" Body="&lt;p&gt;Im using a laptop ASUS A455LF with fresh install of elementary OS 0.4.1 Loki, when i try to use my bluetooth, no devices are found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When try this in terminal:&#xA;&lt;code&gt;sudo systemctl status bluetooth.service&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Get this&#xA;&lt;CODE&gt;&#xA;    ● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; disabled; vendor preset: enabled)&#xA;   Active: active (running) since lun 2017-10-16 12:05:20 COT; 1h 10min ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 948 (bluetoothd)&#xA;   Status: &quot;Running&quot;&#xA;   CGroup: /system.slice/bluetooth.service&#xA;           └─948 /usr/lib/bluetooth/bluetoothd&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Not enough free handles to register service&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Not enough free handles to register service&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Current Time Service could not be registered&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: gatt-time-server: Input/output error (5)&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Not enough free handles to register service&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Not enough free handles to register service&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: Sap driver initialization failed.&#xA;oct 16 12:05:20 einar-X455LF bluetoothd[948]: sap-server: Operation not permitted (1)&#xA;&lt;/CODE&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Result of &lt;code&gt;rfkill list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;CODE&gt;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: brcmwl-0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&lt;/CODE&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Already tried&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Strech bluetooth device search window vertically&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo systemctl restart bluetooth.service&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reinstall OS&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12362" LastEditorUserId="16381" LastEditDate="2018-12-05T23:46:40.173" LastActivityDate="2018-12-05T23:46:40.173" Title="Bluetooth not detecting any device" Tags="|release-loki|bluetooth|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13599" PostTypeId="2" ParentId="13596" CreationDate="2017-10-16T18:38:33.963" Score="1" Body="&lt;p&gt;Looks like the update is released: &lt;a href=&quot;https://twitter.com/pforemski/status/919966850208890880&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://twitter.com/pforemski/status/919966850208890880&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did have a update for &lt;code&gt;wpasupplicant&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wpasupplicant/xenial-security 2.4-0ubuntu6.2 amd64 [upgradable from: 2.4-0ubuntu6]&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But &lt;code&gt;wpa_supplicant -v&lt;/code&gt; still simply says &lt;code&gt;v2.4&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-10-16T18:38:33.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13600" PostTypeId="2" ParentId="13598" CreationDate="2017-10-16T18:58:47.183" Score="1" Body="&lt;p&gt;I had the same issue at first. My problem was that I needed to expand the Device Search window because it was too small and the device that was actually found, and was present under Device, was not visible in the window.It sounds stupid, but that's what it was. &lt;a href=&quot;https://i.stack.imgur.com/sgEmO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sgEmO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cHxhk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cHxhk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2017-10-16T19:08:38.940" LastActivityDate="2017-10-16T19:08:38.940" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13602" PostTypeId="1" CreationDate="2017-10-16T21:42:17.807" Score="0" ViewCount="823" Body="&lt;p&gt;So I have an extra external hard drive that I was using for my xbox.  So I'm trying to set it up so i have extra space for apps and files for my elementary installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed gparted so i could delete it and setup a new partition, but I think im doing something wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can someone hook me up with a little step by step that would give me instructions on how to set this up and get it going?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2017-10-17T06:45:30.907" Title="Setup external hard drive?" Tags="|release-loki|system-installation|pantheon-files|disk-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13605" PostTypeId="2" ParentId="13602" CreationDate="2017-10-17T03:20:20.477" Score="1" Body="&lt;p&gt;I would check out this instructional post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/315914/step-by-step-guide-to-partition-an-external-hdd-in-two-file-formats&quot;&gt;https://askubuntu.com/questions/315914/step-by-step-guide-to-partition-an-external-hdd-in-two-file-formats&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems to have a lot of information along with step by step instructions including screenshots on the use of gparted. I would be aware though, monkeying with the partitions has its risks and I would suggest making a backup of your xbox data elsewere so you don't loose your saved 'Banjo Kazooie' files ;) .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best of luck!&lt;/p&gt;&#xA;" OwnerUserId="12444" LastActivityDate="2017-10-17T03:20:20.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13608" PostTypeId="2" ParentId="13602" CreationDate="2017-10-17T06:45:30.907" Score="0" Body="&lt;p&gt;Thanks for the reply.  that helped.  the big key though was tracking down that when all is said and done, that i should &lt;code&gt;sudo chmod -R 777 /media/christian/External&lt;/code&gt; so that I can use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks again&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2017-10-17T06:45:30.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13609" PostTypeId="1" AcceptedAnswerId="13610" CreationDate="2017-10-17T09:07:43.600" Score="0" ViewCount="576" Body="&lt;p&gt;When I run some apps via PlayOnLinux, they are shown in Plank, but there is no way to pin them. How can I do that anyway?&lt;/p&gt;&#xA;" OwnerUserId="12200" LastActivityDate="2017-10-17T10:07:41.653" Title="How to add PlayOnLinux's app shortcut to Plank?" Tags="|plank|playonlinux|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13610" PostTypeId="2" ParentId="13609" CreationDate="2017-10-17T10:07:41.653" Score="1" Body="&lt;p&gt;You might need to add a .desktop file to ~/.local/share/applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would check to see if there is one in /usr/share/applications. If there is, copy that to the first directory I listed. If one does not exists, you might have to create one manually. But if you can launch it from the wingpanel than you have a valid .desktop file. It just need to be in the right place in order to pin it.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-17T10:07:41.653" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13611" PostTypeId="1" CreationDate="2017-10-17T11:32:19.323" Score="4" ViewCount="5901" Body="&lt;p&gt;I'd like to install a Gnome Shell extension for audio settings: &lt;a href=&quot;https://extensions.gnome.org/extension/906/sound-output-device-chooser&quot; rel=&quot;nofollow noreferrer&quot;&gt;sound-output-device-chooser&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked the Gnome version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /usr/share/gnome/gnome-version.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and downloaded the extension for Gnome 3.18, &lt;a href=&quot;https://extensions.gnome.org/extension-data/sound-output-device-chooser%40kgshank.net.v16.shell-extension.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;version 16&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.local/share/gnome-shell/extensions/sound-output-device-chooser@kgshank.net.v16.shell-extension&#xA;unzip ~/Downloads/sound-output-device-chooser@kgshank.net.v16.shell-extension.zip -d ~/.local/share/gnome-shell/extensions/sound-output-device-chooser@kgshank.net.v16.shell-extension&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I can't see any way to enable it (even in &lt;code&gt;gnome-tweak-tool&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to apply it manually, but after restart I couldn't log in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.gnome.shell enabled-extensions['sound-output-device-chooser@kgshank.net.v16.shell-extension']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11608" LastEditorUserId="11608" LastEditDate="2017-10-17T11:47:43.150" LastActivityDate="2017-10-17T18:12:06.033" Title="Install a Gnome Shell extension" Tags="|gnome|shell|extensions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13612" PostTypeId="2" ParentId="13611" CreationDate="2017-10-17T12:02:29.687" Score="5" Body="&lt;p&gt;This is likely due to the fact that elementary is running the Pantheon desktop not Gnome Shell. While Pantheon is built upon GTK3, it is not a Gnome Shell desktop. Therefore many things that work in Gnome Shell will not work in Pantheon.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-10-17T18:12:06.033" LastActivityDate="2017-10-17T18:12:06.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13616" PostTypeId="1" AcceptedAnswerId="13622" CreationDate="2017-10-17T22:38:20.360" Score="1" ViewCount="3304" Body="&lt;p&gt;after updates from 2017-10-16...&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ymlvq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ymlvq.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...my system won't boot anymore with following errors...&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PlQ6T.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PlQ6T.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to boot into recovery mode, but after typing my username the system does not prompt for password...&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YwHrw.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YwHrw.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...it simply returns to login prompt again&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MXS80.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MXS80.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any other way to rescue the system from complete re-installation in this hopeless case?&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-10-02T09:41:00.703" LastActivityDate="2019-09-27T07:41:30.353" Title="(SOLVED) Cannot login in recovery mode" Tags="|release-loki|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13617" PostTypeId="2" ParentId="12101" CreationDate="2017-10-18T11:24:57.960" Score="-1" Body="&lt;p&gt;Check if you can boot into &lt;code&gt;recovery mode&lt;/code&gt; (selecteable in grub menu).&#xA;This will launch the system in text-only mode.&#xA;Try to login.&#xA;Once loged in, reinstall the lightdm packages with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge lightdm&lt;/code&gt; (this will remove it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove&lt;/code&gt; (this will autoremove leftovers)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install lightdm&lt;/code&gt; (this will install it again)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot, cross your fingers and hope you will se your default login screen again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the same problem with my Elementary, but I cannot login to recovery mode and have to find another way to reinstall the lightdm.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-10-18T11:24:57.960" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13620" PostTypeId="1" AcceptedAnswerId="13639" CreationDate="2017-10-18T14:37:18.523" Score="2" ViewCount="1006" Body="&lt;p&gt;I recently upgraded Google Chrome from version 61.0.3163.100-1 to version 62.0.3202.62-1 and now there are no window buttons (close, maximize) visible when the browser window is maximized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the top part of the window when it's not maximized:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Kfrms.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kfrms.png&quot; alt=&quot;Google Chrome unmaximized&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And here's how it looks like when the window is maximized:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JSMYA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JSMYA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd also like to note that I am using Google Chrome not Chromium.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone of you encountered this problem, or (even better) know how it could be solved?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't had the chance to try this version of Google Chrome on distros other than elementary - information from users of other distros would be appreciated. If this issue is not specific to elementary, then it would probably be better post this question to &lt;a href=&quot;https://askubuntu.com/&quot;&gt;AskUbuntu&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2017-10-20T16:14:19.167" Title="Google Chrome version 62 has no window buttons when maximized" Tags="|release-loki|google-chrome|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13622" PostTypeId="2" ParentId="13616" CreationDate="2017-10-18T15:03:04.517" Score="2" Body="&lt;p&gt;Solution found!&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot from Live USB&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;mkdir /mnt/recover&lt;/code&gt; (create a temp folder)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;mount /dev/sdc1 /mnt/recover&lt;/code&gt; (mount my root fs to temp folder)&lt;/li&gt;&#xA;&lt;li&gt;Tried &lt;code&gt;chroot /mnt/recover&lt;/code&gt; (to become root of my mounted root fs) but received an error that there is no bin/bash folder&lt;/li&gt;&#xA;&lt;li&gt;Copied the bin folder from Live USB to my &lt;code&gt;/mnt/recover&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;chroot /mnt/recover&lt;/code&gt; finally did work&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt purge lightdm&lt;/code&gt; (to remove the faulty lightdm packages)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install lightdm&lt;/code&gt; (to install lightdm anew, but received an error that repos couldn't be reached)&lt;/li&gt;&#xA;&lt;li&gt;Restarted the machine and booted to my system, without lightdm it booted in text mode. But I was finally able to log in normally!&lt;/li&gt;&#xA;&lt;li&gt;From here simple &lt;code&gt;sudo apt install lightdm&lt;/code&gt; did install the display manager.&lt;/li&gt;&#xA;&lt;li&gt;Reboot, and my system is back!&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yJv2b.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yJv2b.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-10-18T15:03:04.517" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13623" PostTypeId="1" CreationDate="2017-10-18T17:30:50.640" Score="0" ViewCount="251" Body="&lt;p&gt;I am running into an issue with rotating a display. I am running a docked dell laptop and using two external displays. After boot when it goes to the login screen it displays only on my laptop display which I am not using unless I am out of the office. The secondary issue I am having is  22 inch display that is rotated vertically for viewing code, programming, etc. When I go into settings and set the screen to rotate and hit apply nothing happens. Any help with this would be appreciated. &lt;/p&gt;&#xA;" OwnerUserId="12466" LastActivityDate="2024-03-18T10:05:20.637" Title="Rotating Displays and docked laptop" Tags="|settings|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13624" PostTypeId="1" CreationDate="2017-10-18T17:35:36.527" Score="1" ViewCount="65" Body="&lt;p&gt;Opera, Vivaldi and Chome all display pages with grey backgrounds and not white backgrounds.   Even the images on the pages look like they are filtered through grey tissue paper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox on the other hand displays websites as normal.   I'm not sure what system setting I've modified that would only effect browsers other than Firefox.&lt;/p&gt;&#xA;" OwnerUserId="12467" LastActivityDate="2017-11-22T09:43:58.097" Title="Firefox the only browser that doesn't display websites abnormal (dark)" Tags="|internet-browser|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13626" PostTypeId="2" ParentId="13620" CreationDate="2017-10-18T19:09:02.303" Score="3" Body="&lt;p&gt;This is specific to Elementary. This is due to a &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=718678&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt; I fixed to show the app indicator in the status bar. The side effect of the implementation detail, was it caused the buttons to get removed when maximized. Knowing the GTK work was going on (which is now in v 63) to make this work as expected anyways, I didn't raise any flags since it is just about 6 weeks that this would be in the wild.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no way around this while having system titlebars off. If you use the system titlebars, then this &lt;em&gt;should&lt;/em&gt; work fine while just eating a little extra space on most monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Version 63 (current dev channel) has this &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=773233&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue fixed&lt;/a&gt;. I'm running it right now and the previous update or two brought the buttons back when maximized. Even when not using the system titlebars.&lt;/p&gt;&#xA;" OwnerUserId="5815" LastActivityDate="2017-10-18T19:09:02.303" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13627" PostTypeId="1" CreationDate="2017-10-18T19:17:02.570" Score="1" ViewCount="527" Body="&lt;p&gt;Elementary OS splash screen has dissapeared after installing nvidia drivers, is there an easy way to restore it? I´ve read some tutorials for Ubuntu but they're hard to follow and results weren't guaranteed. Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="12470" LastEditorUserId="12470" LastEditDate="2017-10-26T15:13:58.297" LastActivityDate="2019-04-19T15:46:46.693" Title="No splash screen after installing nvidia drivers" Tags="|display|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13628" PostTypeId="2" ParentId="13440" CreationDate="2017-10-18T20:15:14.230" Score="0" Body="&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/07/2-best-chinese-pinyin-im-ubuntu-16-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;2 Best Chinese PinYin Input Method in Ubuntu 16.04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you installed the fcitx, run im-config in your terminal  &lt;/li&gt;&#xA;&lt;li&gt;Select &quot;OK&quot;, on the dialog box that pops up. &lt;/li&gt;&#xA;&lt;li&gt;When asked to update user preferences, select &quot;Yes&quot;.  &lt;/li&gt;&#xA;&lt;li&gt;Select fcitx from the list, and select &quot;OK&quot;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart your computer, and you should see an icon for fcitx in&#xA;    the wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl+Space is used to switch between inputs.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BVzOF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BVzOF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12471" LastEditorUserId="12471" LastEditDate="2017-10-18T20:23:54.700" LastActivityDate="2017-10-18T20:23:54.700" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13629" PostTypeId="1" CreationDate="2017-10-18T20:29:47.203" Score="0" ViewCount="122" Body="&lt;p&gt;My menu appears whit like duplicated box in the background on different stiles. Why its this happening? how to fix it?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yQci5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yQci5.png&quot; alt=&quot;Example menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;" OwnerUserId="749" LastActivityDate="2018-11-15T04:03:55.527" Title="How to fix bad drawing menu?" Tags="|wingpanel|menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13630" PostTypeId="1" CreationDate="2017-10-18T21:37:34.000" Score="0" ViewCount="116" Body="&lt;p&gt;I am new at elementary OS and alternative OS in general. I've just installed elementary in my laptop (Acer Aspire 512, which was extremely slow even it is pretty new) and I am not able to boot from the HDD. If I unplug my USB I get a message telling me that there is no USB unit detected. Only when I plug it back I can boot. Is this normal? Is it not possible to boot directly from the HDD?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much! &lt;/p&gt;&#xA;" OwnerUserId="12472" LastActivityDate="2019-12-11T10:02:05.243" Title="Unable to boot from HDD" Tags="|boot|usb-drive|hdd|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13631" PostTypeId="1" CreationDate="2017-10-18T23:38:17.407" Score="1" ViewCount="312" Body="&lt;p&gt;I couldn't find information regarding this in the official web-page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't use elementaryOS professionally if I am required to reinstall the system at each release, there are far too much specialized software that I would have to reinstall.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When (if ever) will elementaryOS offer an upgrade path for its users?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="132" LastEditorUserId="132" LastEditDate="2017-10-19T10:28:01.937" LastActivityDate="2017-10-19T12:50:30.153" Title="Will elementary support a path to upgrade between releases?" Tags="|updates|kernel|" AnswerCount="1" CommentCount="4" ClosedDate="2017-10-25T06:20:25.070" ContentLicense="CC BY-SA 3.0" />
  <row Id="13633" PostTypeId="2" ParentId="13574" CreationDate="2017-10-19T00:12:47.210" Score="0" Body="&lt;p&gt;I have a Lenovo flex 4 with an i7 and AMD M465 (I think without double checking). I spent some time trying to force GPU usage and many remedies I found broke the windows drivers. OpenGL seems to be what works for now. Again, I broke the windows drivers a few times until I gave up and settled for OpenGL &lt;a href=&quot;http://support.amd.com/en-us/download/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;but here is the page for official AMD support&lt;/a&gt; and documentation. I would only attempt if you are willing to fix your machine in CLI or reformat if something goes wrong.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-19T00:12:47.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13634" PostTypeId="2" ParentId="13535" CreationDate="2017-10-19T00:26:05.513" Score="1" Body="&lt;p&gt;If other operations are slow then it may be an information bottleneck for your machine. I had a 2011 mac mini with an i5 and 16gb of ram, but the HDD was 5200 RPM and became the bottleneck for that machine. With 20 icons on the desktop and plenty of docs on the desktop, it had a slow initial boot but was fine once everything loaded. I have only deployed Loki on SSD machines with DDR4, some have even been M.2 SSDs, I have never experienced an App menu hang up on them, they are as fast as I expected them to be. Given that you may experience the same behavior in other data-heavy-loading scenarios I think it is safe to say there is a bottleneck for your machine.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-10-19T00:26:05.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13635" PostTypeId="2" ParentId="13631" CreationDate="2017-10-19T12:50:30.153" Score="4" Body="&lt;p&gt;Unfortunately there is no upgrade path between elementary versions. I am not aware of any plans to implement that either.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-19T12:50:30.153" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13638" PostTypeId="1" CreationDate="2017-10-19T17:49:26.710" Score="0" ViewCount="330" Body="&lt;p&gt;I've just started using Elementary OS, and I'm having a bit of trouble with the resolution saving. My monitor/tv's native resolution is 4K, but I prefer to run in 1080p. When the login screen boots up, it's always in 4K, then when I login, I have to change to 1080p, it never saves. The other thing is that when I change the resolution to 1080p, the mouse cursor is huge because it is the 4K mouse cursor. Could anyone give me a bit of help? Other than that I'm pretty happy with the operating system as a whole. Few bits here and there but overall okay.&lt;/p&gt;&#xA;" OwnerUserId="12481" LastActivityDate="2024-03-18T11:04:25.497" Title="Monitor resolution too high and not saving" Tags="|nvidia|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13639" PostTypeId="2" ParentId="13620" CreationDate="2017-10-19T18:29:27.950" Score="3" Body="&lt;p&gt;It has a workaround running chrome with &lt;code&gt;env XDG_CURRENT_DESKTOP=GNOME&lt;/code&gt; via terminal. Here's a screenshot of that.&lt;a href=&quot;https://i.stack.imgur.com/IMo08.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IMo08.png&quot; alt=&quot;screenshot of Chrome 62 with window controls in maximized mode&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is possible to alter Google Chrome's environment via changing the /opt/google/chrome/google-chrome file (which is actually a shell script) so that the window controls problem is fixed for every opened Chrome instance. The last few lines of this edited file would look something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Temporary fix for maximized window controls absence&#xA;export XDG_CURRENT_DESKTOP=GNOME&#xA;&#xA;# Note: exec -a below is a bashism.&#xA;exec -a &quot;$0&quot; &quot;$HERE/chrome&quot; &quot;$@&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6525" LastEditorUserId="2444" LastEditDate="2017-10-20T16:14:19.167" LastActivityDate="2017-10-20T16:14:19.167" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13640" PostTypeId="1" AcceptedAnswerId="13696" CreationDate="2017-10-20T01:03:35.543" Score="0" ViewCount="155" Body="&lt;p&gt;elementary OS 0.4.1 Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to create a keybinding (like CTRL+Z) to a script file, but it never executes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;System Settings -&amp;gt; Keyboard -&amp;gt; Shortcuts -&amp;gt; Custom -&amp;gt; Add&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried:&#xA;1.) full path, /home/me/myscript.sh, &#xA;2.) bash /home/me/myscript.sh&#xA;3.) copying the script to /usr/bin&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing seems to work. I have create other custom bindings to things like xkill and it works fine, just cannot get it to run a script file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated :-)&lt;/p&gt;&#xA;" OwnerUserId="8597" LastActivityDate="2017-10-23T02:13:56.317" Title="Cannot bind keyboard shortcut to .sh" Tags="|keyboard-shortcuts|script|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13641" PostTypeId="1" CreationDate="2017-10-20T01:44:11.550" Score="1" ViewCount="163" Body="&lt;p&gt;When searching at the Appcenter, entering three characters froze the Appcenter.&lt;br&gt;&#xA;&lt;strong&gt;&lt;em&gt;&quot;io.elementary.appcenter&quot; window does not respond.&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/miZGD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/miZGD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I compeltely removed the Appcenter&lt;br&gt;&#xA;&lt;em&gt;$ sudo apt-get purge appcenter&lt;/em&gt;&lt;br&gt;&#xA;I have also removed the remaining packages associated with Appcenter.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed the Appcenter again.&lt;br&gt;&#xA;&lt;em&gt;$ sudo apt install appcenter&lt;/em&gt;&lt;br&gt;&#xA;And I've made updates in the Appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Likewise, entering three characters froze the Appcenter.&lt;br&gt;&#xA;Other than that it works well.&lt;br&gt;&#xA;Installing, uninstalling, updating, works fine.&lt;br&gt;&#xA;However, when searching for three letters, it froze.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm Korean. This is Korea.&lt;br&gt;&#xA;Do you have any conflicts with Korean input method?&lt;br&gt;&#xA;The Korean input method uses 'nimf'.&lt;br&gt;&#xA;&lt;a href=&quot;https://cogniti.github.io/nimf/&quot; rel=&quot;nofollow noreferrer&quot;&gt;'nimf'&lt;/a&gt; works fine without any problems.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When searching in Appcenter, of course, search in English.&lt;/p&gt;&#xA;" OwnerUserId="12485" LastEditorUserId="12485" LastEditDate="2017-10-20T02:58:07.020" LastActivityDate="2018-01-20T09:47:53.353" Title="Appcenter Freezing. Searching for three letters" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13643" PostTypeId="1" AcceptedAnswerId="13674" CreationDate="2017-10-20T06:54:40.743" Score="0" ViewCount="90" Body="&lt;p&gt;I want to release an app on the app center with payments. Do I have to calculate and pay the taxes by myself or is this already handled by elementary? I couln't find any information about it from elementary or stripe.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers :)&lt;/p&gt;&#xA;" OwnerUserId="12487" LastActivityDate="2017-10-20T19:21:51.693" Title="App Center &amp; taxes" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13644" PostTypeId="1" CreationDate="2017-10-20T07:02:50.710" Score="2" ViewCount="194" Body="&lt;p&gt;Good morning,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed a Torrential however I am no table to use it.&#xA;When I try to download a torrent, Elementary offers the list of torrent clients, but Torrential is not amongst them.&#xA;Also, when I try to change defaults in Firefox, I do not see it in the list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make it default client?&#xA;I tried to browse, but I have no clue where it is hiding and what file to select to run it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&#xA;Peter &lt;/p&gt;&#xA;" OwnerUserId="12488" LastActivityDate="2018-05-19T03:36:36.323" Title="Making torrential my default torrent client" Tags="|firefox|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13645" PostTypeId="2" ParentId="13554" CreationDate="2017-10-20T10:09:57.057" Score="0" Body="&lt;p&gt;Using ElementaryOS is sure to work with your setup. I have a I5-7500 which uses the same chipset as the I7-7700K, GTX 1060 Asrock something something that again uses same chipset as the Z170i which is the z170 chipset. Talking about ddr4 ram, it doesn't really matter which company you chose, DDR4 is more or less the same no matter what company you buy from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install the latest Nvidia driver do this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers&#xA;sudo apt update&#xA;sudo apt install nvidia-387&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that reboot and it should work, if it doesn't work and you get a black screen if you try to login, press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; at the login screen, and write &#xA;apt purge Nvidia&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it will remove the driver and take you back to the original noveau linux driver.&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="686" LastEditDate="2017-10-20T22:23:15.267" LastActivityDate="2017-10-20T22:23:15.267" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13646" PostTypeId="2" ParentId="13644" CreationDate="2017-10-20T10:14:52.773" Score="1" Body="&lt;p&gt;if you save the torrent file on your pc, then by going to the downloads folder and right-clicking it you can choose which application to open it with. There you should also(however I don't remember how) be able to set it as the default app for that filetype&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:14:52.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13647" PostTypeId="2" ParentId="8675" CreationDate="2017-10-20T10:16:58.170" Score="1" Body="&lt;p&gt;Using your favorite editor open the file /etc/apt/apt.conf.d/10periodic and change:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;APT::Periodic::Update-Package-Lists &quot;1&quot;;&lt;/code&gt;&#xA;to&#xA;&lt;code&gt;APT::Periodic::Update-Package-Lists &quot;0&quot;;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="26" LastEditDate="2019-04-17T19:12:38.720" LastActivityDate="2019-04-17T19:12:38.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13648" PostTypeId="2" ParentId="13630" CreationDate="2017-10-20T10:20:53.473" Score="1" Body="&lt;p&gt;It looks to me like the grub bootloader didn't get installed correctly when you setup elementary, did you install it using the default erase and install, install besides &quot;insert os&quot; or the manual partitioning?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It could also be a bad download when you got the iso file, try redownloading the ISO and putting it on the USB and reinstall Elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you installed it in UEFI mode, go into bios and make sure UEFI is enabled&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:20:53.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13650" PostTypeId="2" ParentId="12054" CreationDate="2017-10-20T10:25:17.200" Score="0" Body="&lt;p&gt;The best program the make a bootable usb is Universal USB installer&#xA;however you can also move the files inside the ISO directly to your USB and it should work properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also Unetbootin and Multisystem, however both of them have issues with some iso files and distros.&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:25:17.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13651" PostTypeId="2" ParentId="13598" CreationDate="2017-10-20T10:27:31.690" Score="0" Body="&lt;p&gt;It could also be that bluetooth is not unlocked &#xA;you can use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;rfkill list to see if your bluetooth is blocked if it is you can use&#xA;rfkill unblock bluetooth and it should fix it&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:27:31.690" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13652" PostTypeId="2" ParentId="3548" CreationDate="2017-10-20T10:30:25.593" Score="1" Body="&lt;p&gt;Use the following to get rid of the current nvidia driver&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that add the current graphics repository by writing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to make downloads from it possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install the latest working driver use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-387&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it doesn't work you can open the root terminal at login using&#xA;ctrl+alt+f2 and purge the nvidia driver once again to go back to the standard driver&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="26" LastEditDate="2019-01-02T23:09:50.760" LastActivityDate="2019-01-02T23:09:50.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13654" PostTypeId="2" ParentId="8334" CreationDate="2017-10-20T10:37:49.777" Score="1" Body="&lt;p&gt;I see you are using the Intel Corporations display driver.&#xA;Do you have a built in graphics chip from either Nvidia or Amd&#xA;cause if you do you might want to install the latest drivers for ubuntu&#xA;from either of them to make it work properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure about AMD but to install nvidia drivers here is what you do&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:graphics-drivers which is add the graphics repository for ubuntu based systems to your repository database&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update to activate the possibility of using it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after that install the latest driver by using sudo apt-get install nvidia-387&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:37:49.777" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13655" PostTypeId="2" ParentId="13406" CreationDate="2017-10-20T10:39:51.933" Score="1" Body="&lt;p&gt;this sounds like a driver issue, do you know which wireless chip you have &#xA;I'll give you and update on what to do based on that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci&#xA;lspci -v&#xA;lspci -v | less&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try doing that and post a screenshot with what pops up&#xA;I'll know how to help you after that&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:39:51.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13656" PostTypeId="2" ParentId="13624" CreationDate="2017-10-20T10:42:53.513" Score="-2" Body="&lt;p&gt;try removing the other browers by using &lt;code&gt;apt purge &quot;browser-package name&quot;&lt;/code&gt; and reinstall them&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="578" LastEditDate="2017-10-20T16:15:38.497" LastActivityDate="2017-10-20T16:15:38.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13658" PostTypeId="2" ParentId="13623" CreationDate="2017-10-20T10:45:14.463" Score="0" Body="&lt;p&gt;Which graphics card is in the laptop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia, intel or amd. The answer to what to do depends on that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can use lspci | grep VGA to find the model of the card you are currently using.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can screenshot a reply to me or write which one it is, depending on that I'll lik you to the right driver and how to install it&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:45:14.463" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13659" PostTypeId="2" ParentId="13574" CreationDate="2017-10-20T10:47:25.867" Score="0" Body="&lt;p&gt;what graphics card do you have? The answer to your question depends on that &lt;/p&gt;&#xA;&#xA;&lt;p&gt;try using lspci | grep VGA to check it and either screenshot it or write the result back and I'll post an aswer to what you need to do&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:47:25.867" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13660" PostTypeId="2" ParentId="11007" CreationDate="2017-10-20T10:49:26.463" Score="0" Body="&lt;p&gt;&lt;strong&gt;There are alot of issues using gmail in patheon mail&lt;/strong&gt;, I'd suggest you install another mail client instead my personal prefference is thunderbird&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can get it through the terminal using.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt-get install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="19360" LastEditDate="2019-12-11T11:44:13.507" LastActivityDate="2019-12-11T11:44:13.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13662" PostTypeId="2" ParentId="12043" CreationDate="2017-10-20T10:56:14.510" Score="0" Body="&lt;p&gt;If you need a working nvidia driver and still want to be able to login do the following in the terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;write &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:graphics-drivers to add the repository&#xA;sudo apt-get update to activate the ability to use the above repository as it updates your reposity list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then use sudo apt-get install nvidia-387 to get the latest stable nvidia driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it still doesnt work follow the above users respons to remove it once again&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T10:56:14.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13663" PostTypeId="2" ParentId="13629" CreationDate="2017-10-20T11:01:43.757" Score="-1" Body="&lt;p&gt;It is cause you have multiple extensions added&#xA;try installing elementary tweaks using the following commands in&#xA;the terminal which you can either open manually or press the windows+t shortcut&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then open the tweaker and you should be able to turn it off in additional settings&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T11:01:43.757" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="13665" PostTypeId="2" ParentId="13627" CreationDate="2017-10-20T11:09:46.367" Score="1" Body="&lt;p&gt;&lt;strong&gt;Step 1.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; at login screen to open the root terminal&#xA;there you use&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt purge nvidia&lt;/code&gt; to remove the nvidia driver and go back to the noveau driver. after that &lt;code&gt;reboot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install the current stable version of the nvidia driver by writing the current commands in either the root terminal or &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers&lt;/code&gt; to add the driver repository to the list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt; to update your repository list making the repository active&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that use &lt;code&gt;sudo apt-get install nvidia-387&lt;/code&gt; to get the latest driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work redo step 1.&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="16827" LastEditDate="2019-04-19T15:46:46.693" LastActivityDate="2019-04-19T15:46:46.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13666" PostTypeId="2" ParentId="8959" CreationDate="2017-10-20T11:14:14.860" Score="0" Body="&lt;p&gt;As the code is in 1s and 0s 1 means activated and 0 means deactivated&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to activate natural schrolling and scroll methods and button scrolling button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the command to turn off your touchpad in terminal is the following&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xinput set-prop &quot;SynPS/2 Synaptics TouchPad&quot; &quot;Device Enabled&quot; 0&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T11:14:14.860" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13667" PostTypeId="2" ParentId="13553" CreationDate="2017-10-20T11:49:15.380" Score="1" Body="&lt;p&gt;You are trying to update the wrong way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try using &lt;code&gt;sudo apt-get update&lt;/code&gt; first to find the newest upgrades. After that use &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;. If needed, use &lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt; after that and it should work properly.&lt;/p&gt;&#xA;" OwnerUserId="12489" LastEditorUserId="34" LastEditDate="2017-10-23T12:08:08.623" LastActivityDate="2017-10-23T12:08:08.623" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13668" PostTypeId="2" ParentId="13638" CreationDate="2017-10-20T11:57:14.727" Score="0" Body="&lt;p&gt;what graphics card do you have, which version of ElementaryOS are you running&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use the following command in the terminal to decide which graphics card you have &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo lspci|grep VGA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To me it seems like a driver issue so the answer about it depends on the card and driver you are using.&lt;/p&gt;&#xA;" OwnerUserId="12489" LastActivityDate="2017-10-20T11:57:14.727" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13670" PostTypeId="2" ParentId="2650" CreationDate="2017-10-20T14:15:11.813" Score="11" Body="&lt;p&gt;This information is still valid for Ubuntu 22.04&lt;/p&gt;&#xA;&lt;p&gt;First of all, following steps are directly derived from answer by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/5565/wolf&quot;&gt;@wolf&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; This answer has only been tested on Ubuntu 16.04(Dropped here from google search. Thought to add my experience)&#xA;&lt;br&gt;And I am &lt;strong&gt;assuming&lt;/strong&gt; that:&#xA;&lt;br&gt;a) you have already paired (say) 'QY7' bluetooth earphones with your Ubuntu.&#xA;&lt;br&gt;b) it is listed as 'QY7' in the &lt;em&gt;System Settings -&amp;gt; (Hardware) Bluetooth -&amp;gt; Devices&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h1&gt;Steps:&lt;/h1&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Get the &lt;em&gt;Mac address&lt;/em&gt; of QY7 (We will refer to it as &lt;strong&gt;MAC_ADDR_QY7&lt;/strong&gt;)&#xA;&lt;br&gt;System Settings -&amp;gt;&#xA;&lt;br&gt;(Hardware) Bluetooth -&amp;gt;&#xA;&lt;br&gt;In the 'Devices' list on left side, click on 'QY7' -&amp;gt;&#xA;&lt;br&gt;Note down the &lt;strong&gt;'Address'&lt;/strong&gt; from the right side&#xA;&lt;br&gt;&#xA;&lt;br&gt;In my case, it is:&lt;/p&gt;&#xA;&lt;p&gt;Address   1C:52:db:7a:48:17&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;br&gt;&#xA;2) Get the *Mac address* of your computer's 'Bluetooth adapter' (**MAC_ADDR_BT_ADAP**)&#xA;&lt;br&gt;You can open up a **terminal** and use following command: (source: [How to check bluetooth status via terminal][2])&#xA;&lt;pre&gt;&lt;code&gt;user@user:~$ hcitool dev&#xA;&#xA;Devices:&#xA;hci0    00:1A:5C:C4:B3:41&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Thus, in my case, &lt;strong&gt;00:1A:5C:C4:B3:41&lt;/strong&gt; is the &lt;em&gt;Mac address&lt;/em&gt; of 'Bluetooth adapter'&lt;/p&gt;&#xA;&lt;br&gt;&#xA;3) Navigate to **/var/lib/bluetooth**&#xA;&lt;pre&gt;&lt;code&gt;user@user:~$ cd /var/lib/bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;br&gt;&#xA;4) We need to edit contents of a file called **info** corresponding to the paired 'QY7'.&#xA;&lt;br&gt;But it is located in a folder structure **owned by 'root'**&#xA;&lt;br&gt;For me, the easiest way to proceed was to use GEdit with root privileges and I am sharing the same:&#xA;&lt;pre&gt;&lt;code&gt;user@user:~$ sudo gedit&#xA;(Enter your password)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;br&gt;&#xA;5) In this opened 'Text Editor' -&gt; &#xA;&lt;br&gt;Click 'Open' -&gt; &#xA;&lt;br&gt;Other Documents... -&gt;&#xA;&lt;br&gt;Folder called **MAC_ADDR_BT_ADAP** (from step 2) -&gt;&#xA;&lt;br&gt;Folder called **MAC_ADDR_QY7** (from step 1) -&gt;&#xA;&lt;br&gt;Open file called **info**&#xA;&lt;br&gt;&#xA;&lt;br&gt; Sample contents of **info**:&#xA;&lt;pre&gt;&lt;code&gt;[General]&#xA;Name=QY7&#xA;Class=0x240404&#xA;SupportedTechnologies=BR/EDR;&#xA;Trusted=true&#xA;Blocked=false&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;br&gt;&#xA;6) We **only** need to modify the value corresponding to **'Name'**. That is:&#xA;&lt;pre&gt;&lt;code&gt;Name=modified_name_for_qy7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After modifying, save the file and close the text editor!&lt;/p&gt;&#xA;&lt;br&gt;&#xA;7) Now, we need to **restart the bluetooth service**.&#xA;&lt;pre&gt;&lt;code&gt;user@user:~$ sudo service bluetooth restart&#xA;(Enter your password)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;br&gt;&#xA;8) Verify that the name has been updated in *System Settings -&gt; (Hardware) Bluetooth -&gt; Devices*&#xA;&lt;p&gt;&lt;br&gt; Job complete!&lt;/p&gt;&#xA;" OwnerUserId="12490" LastEditorUserId="32238" LastEditDate="2024-02-03T14:34:50.120" LastActivityDate="2024-02-03T14:34:50.120" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="13674" PostTypeId="2" ParentId="13643" CreationDate="2017-10-20T19:21:51.693" Score="0" Body="&lt;p&gt;As far as I know, you have to calculate and pay the taxes by yourself in any country that has a revenue agency/taxation authority. Fiscal legislation also differs from one country to another. It also depends on how you are registered as a tax payer (business or individual). So you should address this question to your taxation authority help desk/help line, or an accountant from your country of residence.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-10-20T19:21:51.693" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13675" PostTypeId="1" CreationDate="2017-10-20T22:17:56.520" Score="0" ViewCount="239" Body="&lt;p&gt;I just tried elementary OS. I just booted it to try out from a boot USB. I changed the language to German, when I noticed, that the layout was something Russian. So I went a menu back and clicked on stuff like background/Device manager and all these were Russian. is there a fix to this? I'm running the Current Version of elementary OS, Loki.&lt;/p&gt;&#xA;" OwnerUserId="12494" LastEditorUserId="8517" LastEditDate="2020-04-30T14:25:00.667" LastActivityDate="2024-01-10T23:03:20.400" Title="Language in Settings on Loki Live USB are Russian" Tags="|release-loki|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13677" PostTypeId="1" CreationDate="2017-10-21T06:50:43.967" Score="1" ViewCount="88" Body="&lt;p&gt;I recently accidentally deleted my sources list, but have successfully rebuilt. However, all default application like scratch, pantheon terminal, seemed to lose its default application association.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For exampl, ife i click edit on filezilla, it says can't find scratch in /usr/bin, or if i use ssh bookmark manager, it says it can't find pantheon-terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway to fix these (what i assume to be) symlink, or is it best to just reinstall?&lt;/p&gt;&#xA;" OwnerUserId="12496" LastActivityDate="2017-10-21T06:50:43.967" Title="Broken Default App Association" Tags="|pantheon-terminal|code|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13678" PostTypeId="1" CreationDate="2017-10-21T11:17:30.693" Score="2" ViewCount="840" Body="&lt;p&gt;I have a 15.6 inch display, which has default resolution of 1920x1080, and the wingpanel indicator icons looks a bit small to me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a known issue for displays that have a non-standard DPI value, but at least I have an option to scale the text, but the icons still looks very small and hard to read.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tied different icon themes like Arc and it fixed the issue, but I don't want to use non-standard themes because most of them lack some icons, and that creates a bad user experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to increase wingpanel icons in the default elementary icon theme?&lt;/p&gt;&#xA;" OwnerUserId="12498" LastActivityDate="2017-10-21T11:17:30.693" Title="How to increase wingpanel icon size" Tags="|wingpanel|themes|hidpi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13679" PostTypeId="1" CreationDate="2017-10-21T11:19:25.160" Score="1" ViewCount="40" Body="&lt;p&gt;Is there a way to bind aliases like &lt;kbd&gt;Caps Lock&lt;/kbd&gt;+&lt;kbd&gt;h&lt;/kbd&gt;  = &lt;kbd&gt;Home&lt;/kbd&gt;? Or &lt;kbd&gt;Caps Lock&lt;/kbd&gt;+&lt;kbd&gt;j&lt;/kbd&gt; = &lt;kbd&gt;⇦&lt;/kbd&gt;?  On my PC I am using a Vortex poker 3 keyboard that has this and many others as the function layer and I want to use is on my Linux notebook too. &#xA;Any help is greatly appreciated :) &lt;/p&gt;&#xA;" OwnerUserId="12499" LastEditorUserId="686" LastEditDate="2017-10-23T08:11:47.737" LastActivityDate="2017-10-23T08:11:47.737" Title="Is there a way to set custom keypress aliases?" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13680" PostTypeId="2" ParentId="13679" CreationDate="2017-10-21T12:27:05.447" Score="-1" Body="&lt;p&gt;Try using this : &lt;br&gt;&#xA;System Settings &gt; Keyboard &gt; Shortcuts &gt; Custom &lt;/p&gt;&#xA;" OwnerUserId="12119" LastActivityDate="2017-10-21T12:27:05.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13683" PostTypeId="1" CreationDate="2017-10-21T21:46:50.370" Score="1" ViewCount="250" Body="&lt;p&gt;I've recently install elementary OS Loki. In general it works fine except for one major thing. OS is not recognizing my computer as laptop, it recognizes my computer as desktop. For instance, I doesn't have my battery indicator, it doesn't even recognize my battery. When I'm not on AC, when battery drains off, it just goes down, not time to save work. &#xA;Other example, my touchpad is not recognized, I always need to have my usb mouse with me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can some one help me with this? Have anyone experienced anything like this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried also ubuntu 16.04 and 17.10. It's exactly the same symptoms.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is: ASUS ROG GL553V&lt;/p&gt;&#xA;" OwnerUserId="12505" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:36.577" LastActivityDate="2019-05-08T10:04:36.577" Title="elementary OS doesn't reconize my computer as Laptop. OS thinks I have a Desktop" Tags="|release-loki|touchpad|battery|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13684" PostTypeId="2" ParentId="13641" CreationDate="2017-10-22T08:49:50.177" Score="1" Body="&lt;p&gt;I came back.&lt;br&gt;&#xA;You said I was coming back..&lt;br&gt;&#xA;re-install eOS. However, I did not install Korean input method (nimf).&lt;br&gt;&#xA;Searching in Appcenter works good(quickly).&lt;br&gt;&#xA;I install Korean input method. I use Korean input method, nimf Korean input method.&lt;br&gt;&#xA;It stops when it searches in Appcenter.&#xA;end.&#xA;Bye bye.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;currently, iBus input method on eOS does not work in Korean language.&lt;br&gt;&#xA;fcitx has more problems than nimf.&lt;br&gt;&#xA;nimf is not searchable in Appcenter.&lt;br&gt;&#xA;So, it's hard to use Korean.&lt;br&gt;&#xA;By the way, the elementary OS is pretty.&#xA;pretty...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Really goodbye.&lt;/p&gt;&#xA;" OwnerUserId="12485" LastActivityDate="2017-10-22T08:49:50.177" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13688" PostTypeId="2" ParentId="12174" CreationDate="2017-10-22T14:39:44.633" Score="1" Body="&lt;p&gt;You can use Cardapio - I think it's in the repositories, so type &lt;code&gt;sudo apt-get install Cardapio&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then find Cardapio in slingshot and add it to Plank. I know it's not slingshot, but it works just as well, although you may need to use Menu Editor and hide some of the unnecessary entries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I use DockBarX with Cardapio, but before that I used Plank so I can tell you it works.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2017-10-22T14:39:44.633" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13695" PostTypeId="2" ParentId="13640" CreationDate="2017-10-23T00:06:43.713" Score="0" Body="&lt;p&gt;Add '-c' to the bash command.  This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash -c &amp;lt;full path to script&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;E.g.,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash -c /home/me/myscript.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6868" LastActivityDate="2017-10-23T00:06:43.713" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13696" PostTypeId="2" ParentId="13640" CreationDate="2017-10-23T02:13:56.317" Score="1" Body="&lt;p&gt;I found out that it was actually running the script but not showing the terminal.  I validated this by launching chrome from inside the bash script -- so that was the issue.&lt;/p&gt;&#xA;" OwnerUserId="8597" LastActivityDate="2017-10-23T02:13:56.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13699" PostTypeId="1" CreationDate="2017-10-23T08:32:35.847" Score="1" ViewCount="132" Body="&lt;p&gt;I have two monitors, after locking screen and new login attept to the system both monitors show me a black screen. It happens from time to time. What can i do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ uname -r&#xA;4.4.0-97-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ lsb_release -a -u&#xA;No LSB modules are available.&#xA;Distributor ID: Ubuntu&#xA;Description:    Ubuntu 16.04.3 LTS&#xA;Release:    16.04&#xA;Codename:   xenial&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ lsb_release -a &#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 0.4.1 Loki&#xA;Release:    0.4.1&#xA;Codename:   loki&lt;/p&gt;&#xA;" OwnerUserId="12522" LastActivityDate="2024-03-22T06:02:40.297" Title="two monitors and black screen on loki 0.4.1" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13702" PostTypeId="2" ParentId="13624" CreationDate="2017-10-23T09:41:47.110" Score="1" Body="&lt;p&gt;That's a &quot;feature&quot; in the Chromium engine which is only visible if your monitor has a color profile installed. Chromiuum v61 changes the use of colors which have no color information, like images without profile and css and html colors. These are interpreted as sRGB colors which means they are sampled down for screens with a higher color spectrum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have three alternatives:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Use firefox.&lt;/li&gt;&#xA;&lt;li&gt;Disable the feature in Chrome by setting the flag &lt;code&gt;Color correct rendering&lt;/code&gt; to &lt;code&gt;Disabled&lt;/code&gt; (settings in  &lt;code&gt;chrome://flags&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Remove the color profile in your screen settings (not recommended).&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-23T09:41:47.110" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13704" PostTypeId="2" ParentId="12308" CreationDate="2017-10-23T15:40:03.050" Score="2" Body="&lt;p&gt;Please look at:&#xA;&lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=716892#c5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.chromium.org/p/chromium/issues/detail?id=716892#c5&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This issue concerns any file selection dialog.&lt;/p&gt;&#xA;" OwnerUserId="12523" LastActivityDate="2017-10-23T15:40:03.050" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13707" PostTypeId="2" ParentId="13699" CreationDate="2017-10-24T00:46:51.277" Score="0" Body="&lt;p&gt;This seems a problem with the gpu driver. What gpu are you using and what kind of driver opensource or closed?&lt;/p&gt;&#xA;" OwnerUserId="9804" LastActivityDate="2017-10-24T00:46:51.277" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13708" PostTypeId="2" ParentId="13683" CreationDate="2017-10-24T00:53:08.813" Score="0" Body="&lt;p&gt;Sorry but the problem is that your computer have something that is  incompatible with elementary or with other Ubuntu based distro. But probably  are incompatible with linux in general almost for now. &lt;/p&gt;&#xA;" OwnerUserId="9804" LastActivityDate="2017-10-24T00:53:08.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13709" PostTypeId="1" AcceptedAnswerId="15274" CreationDate="2017-10-24T03:09:26.760" Score="0" ViewCount="406" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0Ex3M.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0Ex3M.jpg&quot; alt=&quot;My laptop has geforce g810m and my file system is gpt, UEFI 64bit&quot;&gt;&lt;/a&gt;I used rufus to create my usb drive and i can't figure out why elementaryos doesn't want to install!&lt;/p&gt;&#xA;" OwnerUserId="12526" LastActivityDate="2018-04-04T03:29:01.283" Title="Can't install ElementaryOS!" Tags="|system-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13712" PostTypeId="1" AcceptedAnswerId="13714" CreationDate="2017-10-24T15:22:22.060" Score="1" ViewCount="73" Body="&lt;p&gt;I want Chrome to open itself after every boot up, without entering a command or click its icon. I know there is a file, if in which you write the command or script then the command runs itself after every boot up. But I do not remember that file. &#xA;Please help.&lt;/p&gt;&#xA;" OwnerUserId="12016" LastActivityDate="2017-10-24T19:46:10.920" Title="How to make Google Chrome open itself at every boot?" Tags="|boot|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13714" PostTypeId="2" ParentId="13712" CreationDate="2017-10-24T19:46:10.920" Score="2" Body="&lt;p&gt;System Settings &gt; Applications &gt; Startup &gt; Add Startup App (bottom left corner)&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-10-24T19:46:10.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13718" PostTypeId="1" AcceptedAnswerId="13723" CreationDate="2017-10-25T05:46:21.260" Score="1" ViewCount="251" Body="&lt;p&gt;So, the system is telling me that important updates were found, but every time I run sudo apt update I get these errors.&#xA; &lt;pre&gt; Err:19 &lt;a href=&quot;http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu&lt;/a&gt; xenial Release&lt;br&gt;&#xA;  404  Not Found&#xA;Reading package lists... Done&lt;br&gt;&#xA;W: &lt;a href=&quot;https://download.01.org/gfx/ubuntu/16.04/main/dists/xenial/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.01.org/gfx/ubuntu/16.04/main/dists/xenial/InRelease&lt;/a&gt; : Signature by key 09D6EF97BFB38E916EF060E756A3DEF863961D39 uses weak digest algorithm (SHA1)&#xA;E: The repository '&lt;a href=&quot;http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/kernel-ppa/ppa/ubuntu&lt;/a&gt; xenial Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/pre&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried everything but couldn't find a solution, help please.&lt;/p&gt;&#xA;" OwnerUserId="12537" LastActivityDate="2017-10-25T11:32:12.817" Title="Can't update the system" Tags="|release-loki|updates|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13720" PostTypeId="2" ParentId="12462" CreationDate="2017-10-25T06:54:40.593" Score="1" Body="&lt;p&gt;I found a way to overcome this glitch. After adding or changing the subtitles, just play/pause video for one or two times with the space bar and voila! Your subtitle is there.&lt;/p&gt;&#xA;" OwnerUserId="9585" LastActivityDate="2017-10-25T06:54:40.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13721" PostTypeId="2" ParentId="11783" CreationDate="2017-10-25T06:57:20.320" Score="4" Body="&lt;p&gt;Following steps fixes the problem.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Removing bcmwl-kernel-source package, then reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge bcmwl-kernel-source&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Installing new broadcom firmware:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reload package.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r b43&#xA;sudo modprobe b43&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://www.linuxlinx.com/2016/08/fix-no-wireless-on-macbook-after.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.linuxlinx.com/2016/08/fix-no-wireless-on-macbook-after.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9585" LastEditorUserId="578" LastEditDate="2017-10-25T18:42:00.030" LastActivityDate="2017-10-25T18:42:00.030" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13722" PostTypeId="2" ParentId="13272" CreationDate="2017-10-25T08:12:02.627" Score="1" Body="&lt;p&gt;It actually works if you use the default id file (&lt;code&gt;~/.ssh/id_rsa&lt;/code&gt;). You need to enter the server name like &lt;code&gt;user@host&lt;/code&gt; and leave user name and password fields blank. Then, there comes a pop-up asking you to enter the id file password and all works.&lt;/p&gt;&#xA;" OwnerUserId="11686" LastActivityDate="2017-10-25T08:12:02.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13723" PostTypeId="2" ParentId="13718" CreationDate="2017-10-25T11:32:12.817" Score="0" Body="&lt;p&gt;It seems that you have added this PPA manually. The error says that this software source has no build for Xenial. You should remove this PPA again. Alternative PPA (but is not recommended and supported by elementary's support) would be the &lt;a href=&quot;https://launchpad.net/~canonical-kernel-team/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;PPA from Canonical Kernel Team&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-25T11:32:12.817" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13725" PostTypeId="1" AcceptedAnswerId="13726" CreationDate="2017-10-25T18:27:06.307" Score="1" ViewCount="388" Body="&lt;p&gt;I am planning to move to Elementary OS and was wondering if there is a kind of compatibility chart. I'm planning to buy an ASUS UX390UA, but I would like to have everything working properly. Like sound, Wifi, bluetooth, keyboard, ...&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2017-10-26T18:06:13.657" Title="Compatibility chart" Tags="|wifi|bluetooth|audio|asus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13726" PostTypeId="2" ParentId="13725" CreationDate="2017-10-25T18:59:01.103" Score="3" Body="&lt;p&gt;There is an Ubuntu hardware compatibility list (&lt;a href=&quot;https://certification.ubuntu.com/desktop/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://certification.ubuntu.com/desktop/&lt;/a&gt;) though no Asus machines are in the list. That doesn't mean they aren't compatible by any means. It just means they haven't been tested by Ubuntu (elementary OS's base).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I've seen Dell machines work best with linux. I've never had any compatibility issues. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-10-25T18:59:01.103" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13728" PostTypeId="2" ParentId="10981" CreationDate="2017-10-26T00:14:19.050" Score="2" Body="&lt;p&gt;Snaps are what is called a &quot;sandboxed&quot; or &quot;confined&quot; package format. This means the amount of access that these apps have to your system is very limited. One of those limitations is that Snaps don't have access to the system stylesheet shipped with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;LibreOffice is able to use the Ubuntu stylesheet on Ubuntu because it has been pre-bundled either with the LibreOffice snap or with the Platform Snap that it depends on. In order for LibreOffice to use the elementary stylesheet, the distributors of that snap would have to pre-bundle it.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-10-26T00:14:19.050" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13731" PostTypeId="2" ParentId="1933" CreationDate="2017-10-26T17:41:21.453" Score="6" Body="&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ricotz/docky&#xA;sudo apt update&#xA;sudo apt install --reinstall plank&#xA;killall plank&#xA;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12549" LastActivityDate="2017-10-26T17:41:21.453" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="13732" PostTypeId="2" ParentId="13725" CreationDate="2017-10-26T18:06:13.657" Score="1" Body="&lt;p&gt;I did some digging for you, and couldn't find anything in the official Ubuntu Hardware Compatibility list. However, I own an Asus E403S which works fine with elementary OS - I know it's older than the one you're looking at, but it's similar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, there is an Ubuntu Forums post &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2340639&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; that shows that there are at least a few minor issues surrounding that particular laptop. Asus makes nice laptops, and the hardware is fairly standard, so I say go for it.&lt;/p&gt;&#xA;" OwnerUserId="11985" LastActivityDate="2017-10-26T18:06:13.657" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13734" PostTypeId="2" ParentId="12317" CreationDate="2017-10-26T19:39:38.730" Score="2" Body="&lt;p&gt;I noticed that running &lt;code&gt;xmodmap&lt;/code&gt; works until the system is restarted. In my case it helped to add it to System Settings &gt; Applications &gt; Startup. The paths in the command should be absolute, otherwise they will not be recognized correctly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/bin/xmodmap /home/{your_user_name}/.Xmodmap&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realize that your problem is different, but this solution might help. You might also consider adding this command to &lt;code&gt;.profile&lt;/code&gt; in your home directory (although it didn't work in my case).&lt;/p&gt;&#xA;" OwnerUserId="12552" LastActivityDate="2017-10-26T19:39:38.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13736" PostTypeId="2" ParentId="11850" CreationDate="2017-10-27T05:07:21.147" Score="1" Body="&lt;p&gt;I'm also facing a similar problem, and after many searches, I found these links: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1270676&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1270676&lt;/a&gt; and &lt;a href=&quot;https://github.com/josch09/ampe_stor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/josch09/ampe_stor&lt;/a&gt;. This driver claims to support AU6601, AU6621 and AU6625. You can clone this driver and install it to see if it worked. Unfortunately, it does not work for my AU6625 card reader (card detected, capacity ok, but failed to read any data)...&lt;/p&gt;&#xA;" OwnerUserId="12555" LastActivityDate="2017-10-27T05:07:21.147" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13737" PostTypeId="1" CreationDate="2017-10-27T07:42:39.347" Score="0" ViewCount="344" Body="&lt;p&gt;After installation of some software that in general run in terminal, like vim or htop, their shortcuts appear in application menu, which is nice and correct. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the issue I have is that when I choose e.g. htop from applications menu, it doesn't launch at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have anyone faced such issue? I've searched this site, elementary's bug tracker and google, but haven't even found anyone else having this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't know where I could start investigating this, so if you think I should add some particular logs etc., just let me know in the comment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm working on Loki 0.4.1.&lt;/p&gt;&#xA;" OwnerUserId="12512" LastActivityDate="2018-04-19T15:55:55.483" Title="Command line applications don't launch from menu" Tags="|release-loki|slingshot|app-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13738" PostTypeId="1" CreationDate="2017-10-27T07:47:28.330" Score="0" ViewCount="84" Body="&lt;p&gt;I'm using Loki, Maya Calendar. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the right window (with the Date of the day chosen in the month-view) should appear a list with the entries of that specific day, but it doesen't. The right window remains empty, what ever I choose in the month-view. Is there any trick, that I didn't understand yet or is it a bug? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheerio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Carlos &lt;/p&gt;&#xA;" OwnerUserId="12556" LastActivityDate="2018-12-28T15:00:20.313" Title="Maya Calendar right window remains empty" Tags="|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13740" PostTypeId="2" ParentId="12188" CreationDate="2017-10-27T10:34:51.803" Score="0" Body="&lt;p&gt;Had a problem with Wifi stopped discovering networks all of a sudden.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Card-2: Intel Wireless 7265 driver: iwlwifi bus-ID: 02:00.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;rfkill list all&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: dell-wifi: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: dell-bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;3: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;dmesg |grep wifi&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    5.392851] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2&#xA;[    5.392864] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2&#xA;[    5.393317] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2&#xA;[    5.393650] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2&#xA;[    5.433524] iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm&#xA;[    5.767168] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210&#xA;[    5.769654] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;[    5.770166] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;[    5.878407] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0&#xA;[   18.011141] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.&#xA;[   33.845813] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.&#xA;[  224.671159] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.&#xA;[  226.270719] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.&#xA;[  226.282792] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;[  226.283240] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;[  226.349644] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;[  226.350193] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No solution posted in Internet helped.&#xA;Then a miracle happened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Went to &lt;code&gt;System Settings&lt;/code&gt;,&lt;code&gt;Network&lt;/code&gt;, &lt;code&gt;Wifi&lt;/code&gt; and noticed although it was turned &lt;code&gt;ON&lt;/code&gt;, the comment below said it is turned &lt;code&gt;OFF&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I switched it &lt;code&gt;OFF&lt;/code&gt; there, and switched it &lt;code&gt;ON&lt;/code&gt; again. And is started working as before.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-10-27T10:34:51.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13742" PostTypeId="2" ParentId="12188" CreationDate="2017-10-27T12:20:20.950" Score="1" Body="&lt;p&gt;If you have a working Internet connection via Ethernet, run this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install bcmwl-kernel-source&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot.&lt;/p&gt;&#xA;" OwnerUserId="12559" LastActivityDate="2017-10-27T12:20:20.950" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13743" PostTypeId="2" ParentId="12361" CreationDate="2017-10-27T14:14:44.813" Score="2" Body="&lt;p&gt;For some reason, Loki doesn't come pre-installed with gksudo. When you launch BleachBit as root, it expects gksudo to be installed, so that it can prompt you for elevation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to get this to work right, all you need to do is to install gksudo.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After executing this step, launching BleachBit as root should work fine.&lt;/p&gt;&#xA;" OwnerUserId="12560" LastEditorUserId="16827" LastEditDate="2020-01-03T12:36:01.870" LastActivityDate="2020-01-03T12:36:01.870" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13744" PostTypeId="1" AcceptedAnswerId="13755" CreationDate="2017-10-27T14:58:22.413" Score="0" ViewCount="119" Body="&lt;p&gt;I know it wasn't a good idea, but after I used the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm bash_history&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in the pantheon terminal, the colors (like when using &lt;code&gt;ls&lt;/code&gt;) disappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&#xA;Can someone provide the original &lt;code&gt;bash_history&lt;/code&gt;file, or is there an easier way?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note:&#xA;This&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.pantheon.terminal.settings palette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;did not work.&lt;/p&gt;&#xA;" OwnerUserId="12561" LastActivityDate="2017-10-28T02:15:04.540" Title="Colors in Terminal not working after deleting bash history" Tags="|pantheon-terminal|color|default|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13745" PostTypeId="2" ParentId="13088" CreationDate="2017-10-27T15:55:49.913" Score="3" Body="&lt;p&gt;So it's been about 2 months since I have been using elementary OS on an Asus Zenbook Flip UX360. I will write down my experience so that it helps anyone else who is planning to buy this laptop.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Installation:&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I created installation media using Rufus and it worked perfectly. &lt;/li&gt;&#xA;&lt;li&gt;Initially, I tried to install using unetbootin but it did not work.&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;After Installation&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Font size: Font looked tiny at first. I changed font size by using universal access menu and then choosing text size to be large. I could have also used dconf editor (org&gt;gnome&gt;desktop&gt;interface)  but did not.&lt;/li&gt;&#xA;&lt;li&gt;Gesture Support:  I used &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;libinput-gestures&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Disable Bluetooth at startup: For some reason, Bluetooth gets started during startup (probably a 16.04 issue). I disabled it by adding &lt;code&gt;rfkill block bluetooth&lt;/code&gt; in /etc/rc.local .&lt;/li&gt;&#xA;&lt;li&gt;Chrome zoom: I set Chrome zoom level to 125% by default (Search for zoom in Chrome settings and you will get it).&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;Experience so far&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;It has been really good. I am in academia and this laptop is my daily driver.&lt;/li&gt;&#xA;&lt;li&gt;Touchscreen works but not sure about tablet mode. I don't use either of those, so it is not an issue.&lt;/li&gt;&#xA;&lt;li&gt;Battery life is less (about 6-7hours) than what I was getting with Windows 10 (about 9 hours). But still good enough for daily work. &lt;/li&gt;&#xA;&lt;li&gt;There is a &lt;a href=&quot;https://bugzilla.redhat.com/show_bug.cgi?id=1431372&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt; (not specific to elementary) where a process takes a lot of CPU at the start. It goes away after you touch the screen once. &lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I will add more things as I notice them. I think it will be good if there is a place where people can write down their experiences with different laptop models. This makes life easier for a new user who wants to buy a new laptop. &lt;/p&gt;&#xA;" OwnerUserId="11731" LastEditorUserId="8517" LastEditDate="2019-04-18T11:42:32.463" LastActivityDate="2019-04-18T11:42:32.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13746" PostTypeId="1" AcceptedAnswerId="13750" CreationDate="2017-10-27T16:05:10.823" Score="0" ViewCount="43" Body="&lt;p&gt;I am trying to run Yakindu (&lt;a href=&quot;https://www.itemis.com/en/yakindu/state-machine/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.itemis.com/en/yakindu/state-machine/&lt;/a&gt;) on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But as soon as I start it the GUI starts slowing down until it is not responding anymore/is frozen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried it on 2 different computers running Elementary OS (a desktop and a laptop: different CPU, different GPU) with the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note 1: Yakindu is based on eclipse and eclipse is running OK on Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note 2: Yakindu is running OK on an Ubuntu system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note 3: When Yakindu is started the Xserver seems to be getting a lot of CPU load&lt;/p&gt;&#xA;" OwnerUserId="12563" LastActivityDate="2017-10-27T18:02:58.707" Title="Yakindu application cannot run on elementary OS" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ClosedDate="2017-11-01T12:37:08.003" ContentLicense="CC BY-SA 3.0" />
  <row Id="13747" PostTypeId="2" ParentId="13737" CreationDate="2017-10-27T16:30:47.457" Score="1" Body="&lt;p&gt;Still don't have any idea where to look for real reason of the issue, but I've found a workaround. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example for htop application, in file &lt;code&gt;/usr/share/applications/htop.desktop&lt;/code&gt; I've changed lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Terminal=true&#xA;Exec=htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Terminal=false&#xA;Exec=x-terminal-emulator -e htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now it works. I'm aware that it's not like it should be, as it requires to fix every terminal application separately, so if anyone has a real solution, I still would be happy to know about it.&lt;/p&gt;&#xA;" OwnerUserId="12512" LastActivityDate="2017-10-27T16:30:47.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13748" PostTypeId="1" CreationDate="2017-10-27T17:37:14.563" Score="1" ViewCount="253" Body="&lt;p&gt;I'm experiencing two issues while trying to update elementary OS using the AppCenter. I am wondering if there is something I can do to solve both issues.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Freezing&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Most of the times when I click the update button in the AppCenter(&lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;), the system updates will start downloading and installing but freezing my computer after a while. Most of the times I can just turn off the machine and start again without any harm done. Only once I got the black Elementary screen with different &lt;a href=&quot;/questions/tagged/boot&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;boot&amp;#39;&quot; rel=&quot;tag&quot;&gt;boot&lt;/a&gt; options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I perform the updates using &lt;code&gt;apt&lt;/code&gt;, there's never a problem. So I suppose there is something wrong with the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Duplication&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Sometimes there are some system updates and other app &lt;a href=&quot;/questions/tagged/updates&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;updates&amp;#39;&quot; rel=&quot;tag&quot;&gt;updates&lt;/a&gt; available. If I update them all and the app updates are coming first, a strange thing happens. Every time an app is done updating, it is visually removed from the list of items in need of an update, but then it is replaced with a copy of the elementary OS update. So if there are five items in the list (four apps and one elementary OS update), when everything is done updating, there will be five copies of the elementary OS update with the elementary OS icon and every one with the same title.&lt;/p&gt;&#xA;" OwnerUserId="12375" LastEditorUserId="16827" LastEditDate="2019-04-13T13:47:57.517" LastActivityDate="2019-04-13T13:47:57.517" Title="Problems updating elementary OS through the AppCenter" Tags="|updates|appcenter|" AnswerCount="0" CommentCount="2" ClosedDate="2019-04-17T20:13:29.020" ContentLicense="CC BY-SA 4.0" />
  <row Id="13750" PostTypeId="2" ParentId="13746" CreationDate="2017-10-27T18:02:58.707" Score="1" Body="&lt;p&gt;Ubuntu (and thus eOS) has issues running GTK3 applications (Eclipse uses GTK3, and as a consequence Yakindu probably does too.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Eclipse's case, this is solved by adding this to the &lt;code&gt;eclipse.ini&lt;/code&gt; file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the line before &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;--launcher.appendVmargs&lt;/code&gt;, you add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;--launcher.GTK_version&#xA;&#xA;2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would expect a similar file to be part of your Yakindu installation, could you search for it, make the appropiate changes and try to run it again?&lt;/p&gt;&#xA;" OwnerUserId="10163" LastActivityDate="2017-10-27T18:02:58.707" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13751" PostTypeId="1" CreationDate="2017-10-27T20:40:09.710" Score="0" ViewCount="155" Body="&lt;p&gt;I'm trying to install the version 0.4.1 Loki, but it freeze (holds forever) on the first screen (blank 'e' logo on black background).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to do some extra step to install Windows10 on this computer because I've configured a RAID0 and needed to provide specific driver provided by my mobo manufacturer (Gigabyte, B350 Gamming 3).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it's the first time I'm trying to install an other OS than windows, but I would guess the issue might be also related to the raid0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix that?&lt;/p&gt;&#xA;" OwnerUserId="12565" LastActivityDate="2023-12-11T00:01:30.203" Title="Installation freeze due to RAID0?" Tags="|system-installation|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13753" PostTypeId="1" CreationDate="2017-10-28T00:43:14.333" Score="1" ViewCount="1005" Body="&lt;p&gt;I just installed the latest version of elementary OS 'Loki' available on the web and I have been updated something from the App Center, the problem is that when I click the power button and then the red power button, computer stops working itself, but the screen is illuminated with the elementary logo and does not turn off the whole pc, how can I fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not want to be having to shut down the computer by pressing the physical button ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks ;)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The main problem is when i try to shutdown (pressing the red button from the menu) the pc turns off, but the monitor is still on and illuminated with the elementary logo, only sometimes the shutdown works at 100%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:(&lt;/p&gt;&#xA;" OwnerUserId="12568" LastEditorUserId="242" LastEditDate="2017-12-22T03:08:35.417" LastActivityDate="2018-01-20T09:33:29.007" Title="elementary OS 'Loki' Shutdown doesn't work :(" Tags="|shutdown|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13755" PostTypeId="2" ParentId="13744" CreationDate="2017-10-28T02:15:04.540" Score="0" Body="&lt;p&gt;Just copy the file &lt;code&gt;/etc/skel/.bashrc&lt;/code&gt; into your home. This is the default configuration for your bash profile, so it will reset the preferences.&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2017-10-28T02:15:04.540" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13756" PostTypeId="2" ParentId="12410" CreationDate="2017-10-28T02:34:15.787" Score="-1" Body="&lt;p&gt;Check the folder containing your albums to see if they include an album cover image.&lt;/p&gt;&#xA;" OwnerUserId="12569" LastEditorUserId="7492" LastEditDate="2017-10-28T20:09:28.640" LastActivityDate="2017-10-28T20:09:28.640" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13758" PostTypeId="2" ParentId="13753" CreationDate="2017-10-28T05:23:10.510" Score="1" Body="&lt;p&gt;I'm not sure what is happening there when you press the Shutdown button on the top right corner, but you can always shutdown by opening the terminal and type &lt;code&gt;shutdown -h now&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="11740" LastActivityDate="2017-10-28T05:23:10.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13759" PostTypeId="1" CreationDate="2017-10-28T06:40:47.240" Score="1" ViewCount="85" Body="&lt;p&gt;One thing that puzzle s me as i move from mint is the system updates. In mint you could see what was going to be updated.   The app store does not show what it's updating when it's says there are system updates.  It's not a problem that much i just like to see.  Any way it can be seen? &lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2017-10-28T14:27:21.467" Title="System updates - how to see what is updating" Tags="|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13760" PostTypeId="2" ParentId="13759" CreationDate="2017-10-28T08:45:52.933" Score="2" Body="&lt;p&gt;This is probably not the answer you‘d like to have, but: in terminal you can always do a &lt;code&gt;sudo apt upgrade&lt;/code&gt; and you will see the packages which will be updated.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-10-28T08:45:52.933" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13762" PostTypeId="2" ParentId="13759" CreationDate="2017-10-28T14:27:21.467" Score="0" Body="&lt;p&gt;Additionally, try run &lt;code&gt;sudo apt -u upgrade --assume-no&lt;/code&gt; in terminal to see which packages are upgradeable.&lt;/p&gt;&#xA;" OwnerUserId="12572" LastActivityDate="2017-10-28T14:27:21.467" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13766" PostTypeId="1" AcceptedAnswerId="13795" CreationDate="2017-10-29T07:21:25.430" Score="0" ViewCount="1002" Body="&lt;p&gt;How is power management being done in Elementary at the moment? Power managing the NVidia GPU seems important, and at the moment this is the only article I can find &lt;a href=&quot;http://www.akitaonrails.com/2017/03/14/enabling-optimus-nvidia-gpu-on-the-dell-xps-15-with-linux-even-on-battery&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.akitaonrails.com/2017/03/14/enabling-optimus-nvidia-gpu-on-the-dell-xps-15-with-linux-even-on-battery&lt;/a&gt; However, it is TLP which is not installed, and so makes me suspect that Elementary might be using a competing power management solution? &lt;/p&gt;&#xA;" OwnerUserId="12579" LastActivityDate="2017-11-01T14:58:58.750" Title="Can I use TLP for power management (Dell XPS 15 9560)" Tags="|nvidia|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13769" PostTypeId="1" CreationDate="2017-10-29T22:46:09.640" Score="2" ViewCount="729" Body="&lt;p&gt;Good afternoon,&lt;/p&gt;&#xA;&lt;p&gt;I already downloaded your OS, but before starting the installation process I'd like to know if at the start of it I will be able to choose if I want to install the 32-bit or 64-bit version of the OS, (this is not appropiately addressed in the download page). If this is not the case, could you please direct me to the download page of the 64-bit version?&lt;/p&gt;&#xA;&lt;p&gt;I appreciate your help, and I congratulate the team por its elegant and minimalist OS.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h3&gt;&lt;em&gt;Original Spanish question&lt;/em&gt;&lt;/h3&gt;&#xA;&lt;p&gt;Buenas tardes&lt;/p&gt;&#xA;&lt;p&gt;Ya descargue su sistema operativo antes de empezar la instalación me gustaría saber si al comienzo me va a dejar elegir la forma en que quiero instalar si en 32bits o 64bits ya que al momento de descargar no aclaran esto , si no por favor me dan el enlace de descarga de elementary os 64bit.&lt;/p&gt;&#xA;&lt;p&gt;Les agradezco su ayuda y los felicito por su elegante minimista SO&lt;/p&gt;&#xA;" OwnerUserId="12588" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-11-02T21:13:39.180" Title="How to choose between a 32-bit or 64-bit version OS / Como elegir arquitectura" Tags="|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13770" PostTypeId="1" AcceptedAnswerId="13796" CreationDate="2017-10-30T10:24:14.317" Score="2" ViewCount="646" Body="&lt;p&gt;I'm able to connect to an ssh server through pantheon-files, the problem is that I'd like to save this connection somewhere so that I'm able to click on the saved connection and it will automatically connect without asking me info everytime.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do this?&lt;/p&gt;&#xA;" OwnerUserId="12590" LastActivityDate="2017-11-01T16:16:51.020" Title="Save ssh connection pantheon-files" Tags="|pantheon-files|ssh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13772" PostTypeId="2" ParentId="13769" CreationDate="2017-10-30T18:12:51.250" Score="5" Body="&lt;p&gt;Starting from elementary OS Loki, the OS is only available for 64-bit CPUs. So if you downloaded the ISO from the &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;noreferrer&quot;&gt;official page&lt;/a&gt;, you already have the 64-bit version.&lt;/p&gt;&#xA;&lt;h3&gt;&lt;em&gt;Spanish&lt;/em&gt;&lt;/h3&gt;&#xA;&lt;p&gt;Hola Ruben, desde el lanzamiento de elementary OS Loki, el SO sólo está disponible para arquitecturas de 64 bits. Si descargaste la ISO desde la &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;noreferrer&quot;&gt;página oficial&lt;/a&gt;, ya tenés la versión de 64 bits.&lt;/p&gt;&#xA;" OwnerUserId="10163" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-10-30T18:12:51.250" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13774" PostTypeId="1" CreationDate="2017-10-30T22:10:06.313" Score="1" ViewCount="572" Body="&lt;p&gt;When I opened up Geary today, the window spans wider than the screen and is super narrow. I can't resize the window or maximize, I can only close it.&lt;a href=&quot;https://i.stack.imgur.com/SoWA4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SoWA4.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2017-10-31T08:05:33.710" Title="Weird window size bug with Geary" Tags="|desktop|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2017-10-31T22:20:04.347" ContentLicense="CC BY-SA 3.0" />
  <row Id="13775" PostTypeId="2" ParentId="12546" CreationDate="2017-10-30T22:24:02.580" Score="2" Body="&lt;p&gt;Open terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pkill wingpanel&lt;/code&gt; (it will kill wingpanel process, but the process should restart itself without the dock icon)&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2017-10-30T22:24:02.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13777" PostTypeId="2" ParentId="13774" CreationDate="2017-10-31T08:05:33.710" Score="-1" Body="&lt;p&gt;Try to upgrade your distro. You can check for updates in the AppStore or just type :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work reinstall geary.&lt;/p&gt;&#xA;" OwnerUserId="12599" LastActivityDate="2017-10-31T08:05:33.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13778" PostTypeId="2" ParentId="4773" CreationDate="2017-10-31T08:27:34.310" Score="1" Body="&lt;p&gt;Try this : &lt;a href=&quot;https://etcher.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://etcher.io/&lt;/a&gt;&#xA;It is multiplatform and it is as easy as clicking a button:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9iI8d.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9iI8d.gif&quot; alt=&quot;Etcher screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12599" LastActivityDate="2017-10-31T08:27:34.310" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13779" PostTypeId="2" ParentId="8503" CreationDate="2017-10-31T12:34:33.643" Score="1" Body="&lt;p&gt;I also used the xmodmap solution, but this disables the middle mouse completely. &#xA;Another solution is installing the gnome-tweak-tool from the AppCenter and disabling Middle-click Paste: &#xA;&lt;a href=&quot;https://askubuntu.com/a/872165/519324&quot;&gt;https://askubuntu.com/a/872165/519324&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I opened &lt;a href=&quot;https://github.com/elementary/default-settings/issues/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue&lt;/a&gt; for this. As of elementary OS 5 and 5.1, it has been resolved and there is now a toggle in &lt;strong&gt;System Settings&lt;/strong&gt; → &lt;strong&gt;Mouse &amp;amp; Touchpad&lt;/strong&gt; → &lt;strong&gt;Clicking&lt;/strong&gt; called &lt;strong&gt;Middle click paste&lt;/strong&gt; that can enable or disable this behavior.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="308" LastEditDate="2019-12-19T20:21:47.893" LastActivityDate="2019-12-19T20:21:47.893" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13781" PostTypeId="1" AcceptedAnswerId="13782" CreationDate="2017-10-31T20:20:51.760" Score="0" ViewCount="2067" Body="&lt;p&gt;I want to install a new theme to Plank but the folder is locked and I have no idea how to unlock it. Super new to Linux. &lt;/p&gt;&#xA;" OwnerUserId="12605" LastActivityDate="2020-12-06T04:28:16.517" Title="How to unlock a folder" Tags="|security|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13782" PostTypeId="2" ParentId="13781" CreationDate="2017-10-31T20:48:43.517" Score="1" Body="&lt;p&gt;Are you in Files? If so, that sounds like you need to open Files by right-clicking on it and selecting &quot;Run as Administrator,&quot; or something to that effect (I'm not on my elementary machine right now.).&#xA;Then try opening the file.&#xA;On a side note: if it's a theme, and it's in the proper folder, can you just change the theme by ctrl+right-clicking on plank and changing the theme in the dropdown?&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2017-10-31T20:48:43.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13784" PostTypeId="2" ParentId="13738" CreationDate="2017-11-01T03:22:57.547" Score="1" Body="&lt;p&gt;No that is most definitely a bug, you could try running the latest master as there have been quite a lot of fixes recently about events not showing correctly in Calendar, however that would require building it, if not wait for the next release of Calendar. Sorry for the bad news.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2017-11-01T03:22:57.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13785" PostTypeId="2" ParentId="13500" CreationDate="2017-11-01T03:36:09.317" Score="1" Body="&lt;p&gt;Unfortunately I do not believe that is currently possible, Calendar doesn't currently support Exchange although there was some work on that in pantheon accounts, although I don't believe that works currently. Outlook supports publishing the calendar on a webdav server, however it does that without authentication which Calendar doesn't currently support, hopefully support for that can be added soon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Relevant GitHub issues: &lt;a href=&quot;https://github.com/elementary/calendar/issues/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;Outlook support&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/calendar/issues/41&quot; rel=&quot;nofollow noreferrer&quot;&gt;Exchange support&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/calendar/issues/75&quot; rel=&quot;nofollow noreferrer&quot;&gt;ics sync&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/calendar/issues/104&quot; rel=&quot;nofollow noreferrer&quot;&gt;read only calendar support&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2017-11-01T03:36:09.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13786" PostTypeId="1" CreationDate="2017-11-01T06:17:26.480" Score="0" ViewCount="157" Body="&lt;p&gt;Is there a way to generate a custom notification, and how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a bash script that performs rsync backups, and this script runs as a cronjob. I want to have that script generate a notification to tell me that the backup has completed, with something like the time and date the job successfully finished. I could do this in other distros. Can I do this in EOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched the elementaryos.stackexchange.com quite thoroughly, and have also googled it, but cannot find an answer. Thank you. &lt;/p&gt;&#xA;" OwnerUserId="12609" LastEditorUserId="12609" LastEditDate="2017-11-05T04:07:20.923" LastActivityDate="2017-11-05T04:07:20.923" Title="Can I generate a custom notification? [solved]" Tags="|release-loki|notifications|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13787" PostTypeId="1" AcceptedAnswerId="13793" CreationDate="2017-11-01T06:59:13.100" Score="2" ViewCount="174" Body="&lt;p&gt;Everytime I edit something in Scratch, it creates a file with the same name ending with a tilde (~).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I prevent this? This is really annoying while working with Git.&lt;/p&gt;&#xA;" OwnerUserId="12610" LastActivityDate="2017-11-01T17:58:20.433" Title="Prevent Scratch from making files with tilde" Tags="|code|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13789" PostTypeId="1" AcceptedAnswerId="13865" CreationDate="2017-11-01T09:12:50.740" Score="3" ViewCount="1059" Body="&lt;p&gt;Is there a backup tool that the Elementary team recommends, even though they do not directly support the software? Or is there a technique within the OS I have yet to discover?  There is talk of Timeshare in the responses I have seen but I cannot find it in the App Centre.&lt;/p&gt;&#xA;" OwnerUserId="12468" LastActivityDate="2017-11-07T20:23:47.340" Title="Recommended Backup Tool for Elementary OS" Tags="|system-installation|filesystem|backup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13790" PostTypeId="2" ParentId="13787" CreationDate="2017-11-01T11:39:59.960" Score="1" Body="&lt;p&gt;This is because you have the file open and are currently editing it. Once you close Scratch this should disappear.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-01T11:39:59.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13791" PostTypeId="1" AcceptedAnswerId="13855" CreationDate="2017-11-01T12:30:32.297" Score="2" ViewCount="1743" Body="&lt;p&gt;This is not something I normally mess with but the notification pop sound really annoys me.  I turned the volume down but do like to have a sound.  Any advice on how this can be changed? I guess it's a sound file somewhere? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2019-04-28T13:26:33.057" Title="Notification sound change" Tags="|notifications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13792" PostTypeId="2" ParentId="12982" CreationDate="2017-11-01T12:43:39.763" Score="0" Body="&lt;p&gt;In my case &lt;code&gt;sudo shutdown -h now&lt;/code&gt;would hang too.  I also tried changing the grub configuration as suggested in many posts, but still had the same result.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot into recovery mode by pressing the shift key at boot.  From there go to 'Advanced Options.  There is an option to run fsck to repair your disk.  For good measure also perform the check grub option.  After that, select reboot normally from the menu.  The system will reboot and then should shutdown normally.&lt;/p&gt;&#xA;" OwnerUserId="12606" LastEditorUserId="7492" LastEditDate="2017-11-01T13:41:14.920" LastActivityDate="2017-11-01T13:41:14.920" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13793" PostTypeId="2" ParentId="13787" CreationDate="2017-11-01T12:47:25.500" Score="3" Body="&lt;p&gt;Although not a direct resolution to your problem, you should probably add tilde files to your .gitignore file anyways. This will prevent git from even noticing them, and should solve your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read about the format and contents of the .gitignore file &lt;a href=&quot;https://git-scm.com/docs/gitignore&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best of luck!&lt;/p&gt;&#xA;" OwnerUserId="11985" LastActivityDate="2017-11-01T12:47:25.500" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13794" PostTypeId="2" ParentId="13789" CreationDate="2017-11-01T12:52:03.883" Score="5" Body="&lt;p&gt;I'm not sure what the elementary developers would recommend, but I can make a personal recommendation for a nice GTK3 back up app called &lt;a href=&quot;https://appcenter.elementary.io/deja-dup.desktop&quot; rel=&quot;noreferrer&quot;&gt;Backups&lt;/a&gt;. It's in the AppCenter and can be easily installed and configured. I use it to back up my /home directory to an external drive, that then gets pushed once a week to Google Drive via a cron job.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are other backup options out there, but personally I've found Backups to work well for my needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best of luck to you!&lt;/p&gt;&#xA;" OwnerUserId="11985" LastActivityDate="2017-11-01T12:52:03.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13795" PostTypeId="2" ParentId="13766" CreationDate="2017-11-01T14:58:58.750" Score="0" Body="&lt;p&gt;You can use TLP on elementary and it does a lot on my Inspiron machine to save battery.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linrunner/tlp&#xA;sudo apt update&#xA;sudo apt install tlp tlp-rdw&#xA;sudo tlp start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-01T14:58:58.750" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13796" PostTypeId="2" ParentId="13770" CreationDate="2017-11-01T16:16:51.020" Score="2" Body="&lt;p&gt;Try bookmarking the root folder on the server (Use the folder context menu).  Close the connection and click on the bookmark.  When asked for your password select &quot;Keep for ever&quot;.  Note: You can rename the bookmark to whatever is most helpful for you.  Unfortunately, at the moment, you cannot move outside of the &quot;Personal bookmarks&quot; section.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-11-01T16:16:51.020" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13797" PostTypeId="1" AcceptedAnswerId="13798" CreationDate="2017-11-01T16:56:32.350" Score="0" ViewCount="54" Body="&lt;p&gt;When creating a keyboard shortcut I can't use the &lt;kbd&gt;§&lt;/kbd&gt; key on my Apple keyboard, which is located under the &lt;kbd&gt;Esc&lt;/kbd&gt; key. In elementary OS when the § key is pressed a &amp;lt; is returned. When I create a keyboard shortcut &lt;code&gt;Alt+§&lt;/code&gt; (which results into &lt;code&gt;Alt+&amp;lt;&lt;/code&gt;) it does create the shortcut but I can't use it by pressing &lt;code&gt;Alt+§&lt;/code&gt;. I can then only use it by pressing &lt;code&gt;Alt+Shift+,&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="11633" LastEditorUserId="308" LastEditDate="2018-08-07T18:14:53.010" LastActivityDate="2018-08-07T18:14:53.010" Title="Can't bind the § key on the Apple keyboard" Tags="|release-loki|keyboard|keyboard-shortcuts|apple|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13798" PostTypeId="2" ParentId="13797" CreationDate="2017-11-01T17:27:38.627" Score="1" Body="&lt;p&gt;I'm not sure if you are comfortable trying to use the command line, but this is a known issue on Linux with some Apple keyboards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Apple_Keyboard#.3C_and_.3E_have_changed_place_with_.C2.A7_and_.C2.BD&quot; rel=&quot;nofollow noreferrer&quot;&gt;This Arch Wiki Page&lt;/a&gt; has instructions for fixing your exact situation. Please try this, and let me know if you are successful.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-01T17:27:38.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13799" PostTypeId="1" CreationDate="2017-11-01T17:58:11.083" Score="0" ViewCount="620" Body="&lt;p&gt;When I was evaluating Elementary as my primary os, i installed the os on my ssd, and then hooked up an external as my storage drive.  When I decided this is the OS that I want to use primarily going forward, I bought another 1TB internal drive and cloned my external using PV.  This has created a problem for scripts that I want to use at boot time that need to access data from that drive.  (my wallpaper for a wallpaper changer script I run on boot in case you're curious).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, now my drive still thinks its an external in pantheon.  See below:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6szPk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6szPk.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it is fine when I click on it, I can hear the drive &quot;wake up&quot; and finally, actually mount.  But I need this to mount as an internal drive at system boot so I don't have to &quot;wake it up&quot; like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone give me a step by step on this?  I'll love you forever I promise.&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2017-11-01T18:48:37.530" Title="problems automounting a hard drive" Tags="|release-loki|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13800" PostTypeId="2" ParentId="13787" CreationDate="2017-11-01T17:58:20.433" Score="0" Body="&lt;p&gt;You won't see the tilde file if you disable &quot;show hidden files&quot; in Files or disable &quot;save files when changed&quot; in Scratch.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-11-01T17:58:20.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13801" PostTypeId="1" CreationDate="2017-11-01T18:31:04.197" Score="0" ViewCount="290" Body="&lt;p&gt;I am running the latest version of Elementary OS (Loki I believe) and have uninstalled the Pantheon Mail through the App Center as I want to use a different mail client. However I am still getting notifications from Pantheon Mail and when I click on them it opens the Pantheon Mail app (with a low res image of the app logo on the dock).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help/solutions to this would be greatly appreciated, thanks!&lt;/p&gt;&#xA;" OwnerUserId="12613" LastActivityDate="2024-03-15T16:05:05.590" Title="Pantheon Mail still showing notifications after uninstall" Tags="|pantheon-mail|pantheon|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13802" PostTypeId="2" ParentId="13799" CreationDate="2017-11-01T18:48:37.530" Score="2" Body="&lt;p&gt;I'm guessing there is just no &lt;code&gt;fstab&lt;/code&gt; entry for your drive. I hope you are comfortable using the command line a bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All you want to do is find out the UUID of your new drive, and add an fstab entry&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Step One&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Find the &lt;code&gt;FSTYPE&lt;/code&gt; and &lt;code&gt;UUID&lt;/code&gt; of the &lt;em&gt;partition&lt;/em&gt; you want to mount&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# The df command will give you a list of mounted drives&#xA;# You want to retain the Mounted on entry of your partition for unmounting later &#xA;df -h&#xA;&#xA;# lsblk will give you the UUID for adding to fstab&#xA;lsblk -o 'NAME,MOUNTPOINT,FSTYPE,UUID,SIZE,MODEL'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step Two&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Make the folder that will be your mount point (you need one), as an example: &lt;code&gt;mkdir /media/storage&lt;/code&gt; will create a folder &lt;code&gt;media/storage&lt;/code&gt; which could be the new root of your drive&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Step Three&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Unmount the partition you want to load up at boot (the &lt;code&gt;Mounted on&lt;/code&gt; entry from &lt;code&gt;df -h&lt;/code&gt;, such as &lt;code&gt;/mnt/external&lt;/code&gt; or something like that)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;umount /media/drive # Replace /media/drive with Mounted on folder&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step Four&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Add your drive to fstab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Build your command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=&amp;lt;YOUR UID&amp;gt;  &amp;lt;YOUR MOUNT POINT&amp;gt;  &amp;lt;YOUR FSTYPE&amp;gt;  defaults  0  2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is an example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UUID=d2d0d4f6-7947-455e-a3d1-d73183f0afac /media/storage           ext4    defaults        0       2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install the drive properly run this (replacing with your command):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;UUID=d2d0d4f6-7947-455e-a3d1-d73183f0afac /media/storage&quot; | sudo tee -a /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Step 5&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Try mounting your drives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -av&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this works, your drive should now be available, if not you need to do this:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Fix if mount didn't work&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remove the final line (but not other ones), which should contain the text you created&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try again from the start.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Troubleshooting&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Double check that &lt;code&gt;/etc/fstab&lt;/code&gt; does not contain a different line that references the same drive partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have problems please comment here. It's best not to restart your machine until &lt;code&gt;mount -av&lt;/code&gt; runs successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know how it goes!&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-01T18:48:37.530" CommentCount="9" ContentLicense="CC BY-SA 3.0" />
  <row Id="13803" PostTypeId="1" CreationDate="2017-11-01T18:56:27.167" Score="0" ViewCount="325" Body="&lt;p&gt;I tried to pair my Logitech Anywhere 2s mouse yesterday; it paired successfully but would not respond, due to a known issue with this device and ubuntu/linux bluetooth pairing. That's not the question here, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today, newly armed with instructions for fixing the unresponsive-mouse problem, I used the Elementary OS bluetooth devices list to &lt;em&gt;remove&lt;/em&gt; the mouse, then went to re-pair it to start over. Now, it won't show up in the list at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm getting the same results with bluetoothctl, blueman, and the standard bluetooth window: the device scan runs, other devices are detected properly (my external keyboard paired, is connected and works fine), but the mouse is completely invisible to my Elementary OS system no matter how long I leave the scan running, no matter how many times I put the mouse in pairing mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bluetooth is not blocked, the service is running, and restarting the service has no effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've confirmed that the issue is not the mouse by pairing with other computers running other operating systems, they see it when it goes into pairing mode but Linux does not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Results from &lt;code&gt;lspci -nnk | grep -iA2 net; lsusb; dmesg | egrep -i 'blue|firm'&lt;/code&gt; below, since that was what was asked for in another thread:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;3a:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)&#xA;    Subsystem: Bigfoot Networks, Inc. QCA6174 802.11ac Wireless Network Adapter [1a56:1535]&#xA;    Kernel driver in use: ath10k_pci&#xA;    Kernel modules: ath10k_pci, wl&#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 004: ID 0bda:568b Realtek Semiconductor Corp. &#xA;Bus 001 Device 003: ID 04f3:2234 Elan Microelectronics Corp. &#xA;Bus 001 Device 002: ID 0cf3:e301 Atheros Communications, Inc. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;[    0.175244] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored&#xA;[    2.120501] [drm] GuC firmware load skipped&#xA;[    4.371673] Bluetooth: Core ver 2.22&#xA;[    4.371685] Bluetooth: HCI device and connection manager initialized&#xA;[    4.371687] Bluetooth: HCI socket layer initialized&#xA;[    4.371688] Bluetooth: L2CAP socket layer initialized&#xA;[    4.371693] Bluetooth: SCO socket layer initialized&#xA;[    4.376383] Bluetooth: HCI UART driver ver 2.3&#xA;[    4.376384] Bluetooth: HCI UART protocol H4 registered&#xA;[    4.376384] Bluetooth: HCI UART protocol BCSP registered&#xA;[    4.376385] Bluetooth: HCI UART protocol LL registered&#xA;[    4.376385] Bluetooth: HCI UART protocol ATH3K registered&#xA;[    4.376386] Bluetooth: HCI UART protocol Three-wire (H5) registered&#xA;[    4.376416] Bluetooth: HCI UART protocol Intel registered&#xA;[    4.376433] Bluetooth: HCI UART protocol Broadcom registered&#xA;[    4.376434] Bluetooth: HCI UART protocol QCA registered&#xA;[    4.376434] Bluetooth: HCI UART protocol AG6XX registered&#xA;[    4.376434] Bluetooth: HCI UART protocol Marvell registered&#xA;[    4.600789] Bluetooth: BNEP (Ethernet Emulation) ver 1.3&#xA;[    4.600790] Bluetooth: BNEP filters: protocol multicast&#xA;[    4.600793] Bluetooth: BNEP socket layer initialized&#xA;[    4.768877] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:3a:00.0.bin failed with error -2&#xA;[    4.768883] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/cal-pci-0000:3a:00.0.bin failed with error -2&#xA;[    4.769479] ath10k_pci 0000:3a:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2&#xA;[    4.769480] ath10k_pci 0000:3a:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2&#xA;[    4.770797] ath10k_pci 0000:3a:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5&#xA;[    9.871141] Bluetooth: RFCOMM TTY layer initialized&#xA;[    9.871146] Bluetooth: RFCOMM socket layer initialized&#xA;[    9.871149] Bluetooth: RFCOMM ver 1.11&#xA;[  769.394550] Bluetooth: hci0 advertising data length corrected&#xA;[  844.481555] Bluetooth: hci0 advertising data length corrected&#xA;[ 1663.825285] Bluetooth: HIDP (Human Interface Emulation) ver 1.2&#xA;[ 1663.825289] Bluetooth: HIDP socket layer initialized&#xA;[ 1663.828103] input: Keyboard K380 as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/bluetooth/hci0/hci0:1/0005:046D:B342.0003/input/input26&#xA;[ 1663.828302] hid-generic 0005:046D:B342.0003: input,hidraw2: BLUETOOTH HID v42.00 Keyboard [Keyboard K380] on 9c:b6:d0:ec:fe:02&#xA;[ 4023.167501] Bluetooth: hci0 advertising data length corrected&#xA;[ 4027.037562] Bluetooth: hci0 advertising data length corrected&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help at all would be deeply appreciated!&lt;/p&gt;&#xA;" OwnerUserId="12614" LastActivityDate="2018-01-31T07:03:39.103" Title="Bluetooth will not detect previously-removed mouse" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13804" PostTypeId="2" ParentId="13803" CreationDate="2017-11-01T19:30:49.370" Score="1" Body="&lt;p&gt;I wish I could say I know why, but the situation is fixed: the mouse is paired properly and works great. About an hour after going through the above I thought to run &lt;code&gt;hcitool lescan&lt;/code&gt;, and the mouse turned up immediately. Then I realized that it (and many, many other bluetooth devices in the vicinity) were all displaying in the normal scan window, too. So &lt;em&gt;something&lt;/em&gt; was preventing my computer from seeing many local devices, my mouse included... and then it went away. I may never know what, but everything is now working.&lt;/p&gt;&#xA;" OwnerUserId="12614" LastActivityDate="2017-11-01T19:30:49.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13806" PostTypeId="2" ParentId="13801" CreationDate="2017-11-01T22:21:19.240" Score="0" Body="&lt;p&gt;I used sudo apt purge to remove mine and have no problems, but I never signed in to an account. If it was not a clean uninstall perhaps reinstalling and ensuring your accounts are disconnected before removing the program may help.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-11-01T22:21:19.240" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13807" PostTypeId="2" ParentId="13433" CreationDate="2017-11-01T22:25:07.767" Score="0" Body="&lt;p&gt;In addition to 3rd party apps being a solution, eOS has a &lt;a href=&quot;https://github.com/elementary/gala&quot; rel=&quot;nofollow noreferrer&quot;&gt;place on their github&lt;/a&gt; for feature requests.&lt;/p&gt;&#xA;" OwnerUserId="12359" LastActivityDate="2017-11-01T22:25:07.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13811" PostTypeId="2" ParentId="10209" CreationDate="2017-11-02T11:43:38.913" Score="1" Body="&lt;p&gt;Did you try looking in WINE forums for the answer to this? It's quite possible there aren't many eOS users doing this exact task, and there may be other places online more likely to know the answer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blogs.dailynews.com/click/2014/06/10/adobe-digital-editions-wine-linux-specifically-fedora-20-today/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blogs.dailynews.com/click/2014/06/10/adobe-digital-editions-wine-linux-specifically-fedora-20-today/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[comment was accepted answer so posting as answer]&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-02T11:43:38.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13812" PostTypeId="2" ParentId="7521" CreationDate="2017-11-02T11:54:51.880" Score="1" Body="&lt;p&gt;Have you tried blacklisting some specific versions of the packages? I guess this should help for at least a while!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Package: compiz-plugins-main&#xA;Pin: version 1:0.9.7.0~bzr19-0ubuntu10.1&#xA;Pin-Priority: -1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This goes into the &lt;code&gt;/etc/apt/preferences file&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/322945/64901&quot;&gt;As mentioned here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-02T11:54:51.880" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13813" PostTypeId="2" ParentId="13519" CreationDate="2017-11-02T12:15:12.137" Score="0" Body="&lt;p&gt;These options exist.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Right click on the notification icon in the top right corner&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Notifications settings&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click on the &lt;code&gt;Other&lt;/code&gt; icon which should handle all additional apps&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Admittedly you still need to change settings for &lt;code&gt;EOS apps&lt;/code&gt; individually&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know about you, but I only have 9 other apps to do manually. I agree you should make a feature request for global settings, but that is not for the EOS Stack Exchange.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-02T12:15:12.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13814" PostTypeId="2" ParentId="11546" CreationDate="2017-11-02T12:33:08.943" Score="1" Body="&lt;p&gt;EOS &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6994/is-there-an-elementary-os-oem-install-mode&quot;&gt;doesn't (as far as I'm aware) have an OEM install mode at this point&lt;/a&gt;, however there is work underway to support showing OEM info:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is work going on to support OEMs though:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-about/issues/9&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-about/issues/9&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The legal issues depend on what you want to do, you can freely distribute most Linux software. There might be some applications that have a prohibitive licence (check that case by case). If you have a lot of the same machine to target, you can always create a disk image, and flash all of the computers with an image rather than an installer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope you are able to do what you need.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-02T12:33:08.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13816" PostTypeId="1" CreationDate="2017-11-02T20:24:21.843" Score="1" ViewCount="38" Body="&lt;p&gt;&quot;There is currently no active translator for this translation, please consider becoming a translator as your suggestion might otherwise remain unreviewed&quot;. i see this message in top of the window while suggesting a translations so can you please help me to figure out how to became a translator?&#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="12624" LastActivityDate="2018-07-31T12:01:18.923" Title="Translation from English in to Armenian" Tags="|translation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13819" PostTypeId="1" CreationDate="2017-11-03T08:38:04.987" Score="0" ViewCount="378" Body="&lt;p&gt;I have a 4k laptop and 4k external display connected through HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I connect the display, then boot up the system, it detects it just fine, and works. But when I connect it after boot, it doesn't get detected. The &quot;Detect Displays&quot; button in System Settings does nothing. &lt;strong&gt;How to make it detect it?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the automatic detection after boot is currently buggy, &lt;strong&gt;is there a command to redetect displays?&lt;/strong&gt; (Presumably the same way the system does on boot?)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;OS: &lt;code&gt;elementary OS 0.4.1 Loki x86_64&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Kernel: &lt;code&gt;4.13.10-041310-generic&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I also have the &lt;code&gt;elementary-os/daily&lt;/code&gt; PPA installed.&lt;/p&gt;&#xA;" OwnerUserId="11979" LastActivityDate="2019-04-18T19:03:10.570" Title="External HDMI display not detected after boot" Tags="|display|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13820" PostTypeId="1" CreationDate="2017-11-03T08:51:33.137" Score="2" ViewCount="609" Body="&lt;p&gt;Allow advertisements is disabled in Preferences, but some ads, especially Facebook ads, bypass the filter. I've tried adding some custom lists to &lt;code&gt;/home/.config/epiphany/adblock/filters.list&lt;/code&gt; but they didn't remove the facebook ads. Nothing changed compared with the default easylist.txt.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2017-11-04T08:57:36.943" LastActivityDate="2021-06-04T15:02:55.353" Title="How to block Facebook ads in Epiphany?" Tags="|release-loki|epiphany|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13821" PostTypeId="2" ParentId="13816" CreationDate="2017-11-03T08:51:58.430" Score="1" Body="&lt;p&gt;You can start contributing your translations here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://l10n.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://l10n.elementary.io&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-11-03T08:51:58.430" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13822" PostTypeId="1" CreationDate="2017-11-03T13:56:26.107" Score="0" ViewCount="525" Body="&lt;p&gt;I have managed to install EPSON WF 3640 printer over USB driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how do I install EPSON WF 3640 printer over wireless please ? Any help or pointers pls.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &#xA;S&lt;/p&gt;&#xA;" OwnerUserId="12628" LastActivityDate="2024-04-06T13:07:25.993" Title="How to install a Wireless Epson WF3640 Printer on Elementary OS?" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13823" PostTypeId="1" CreationDate="2017-11-03T14:12:10.797" Score="0" ViewCount="390" Body="&lt;p&gt;Some days ago I install on my PC elementary OS 0.4.1 Loki with parallel Win 8.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I have a trouble. When start elementary OS, I have only wired connection and can't switch it on wireless. The slider doesn't respond.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Write this from Win 8.1 with connection to WiFi.&lt;/p&gt;&#xA;" OwnerUserId="12627" LastEditorUserId="308" LastEditDate="2018-08-07T17:10:23.840" LastActivityDate="2019-05-05T05:02:20.693" Title="Can't switch to wireless mode" Tags="|release-loki|settings|wifi|" AnswerCount="1" CommentCount="1" ClosedDate="2019-05-05T11:00:44.570" ContentLicense="CC BY-SA 4.0" />
  <row Id="13824" PostTypeId="2" ParentId="13820" CreationDate="2017-11-03T22:46:42.470" Score="0" Body="&lt;p&gt;Open &lt;code&gt;Epiphany Browser&lt;/code&gt;  Go to settings &lt;code&gt;Top Right Corner&lt;/code&gt; Click on &lt;code&gt;Preferences&lt;/code&gt; OR &lt;code&gt;CTRL + E&lt;/code&gt; Uncheck &lt;code&gt;Allow Advertisement&lt;/code&gt;  in general Tab to block ads .&lt;/p&gt;&#xA;" OwnerUserId="12119" LastActivityDate="2017-11-03T22:46:42.470" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13825" PostTypeId="1" CreationDate="2017-11-03T22:54:21.157" Score="0" ViewCount="472" Body="&lt;p&gt;Im trying to run the latest elementary image on virtualbox 5.2 from a host of mint 18.2 KDE but i just get a black screen with flashing terminal cursor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Iv checked all the tutorials and im not short of any specs or doing anything wrong (that i can see) , iv got loads of virtual OS's on various virtualbox's so i reasonably comfortable with using it but i just cant get elementary to run its .iso at all?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uaBpG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uaBpG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12631" LastActivityDate="2018-09-04T17:03:43.577" Title="Trying to run elementary on virtualbox" Tags="|virtualbox|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13826" PostTypeId="2" ParentId="9014" CreationDate="2017-11-04T09:08:59.680" Score="1" Body="&lt;p&gt;use &quot;vim.tiny&quot; as vim execute command.&lt;/p&gt;&#xA;" OwnerUserId="9361" LastActivityDate="2017-11-04T09:08:59.680" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13827" PostTypeId="2" ParentId="13822" CreationDate="2017-11-04T10:27:27.980" Score="0" Body="&lt;p&gt;When you search printers on the applications menu, choose it and press add printer does your printer appear on the network printers?&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2017-11-04T10:27:27.980" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="13829" PostTypeId="1" AcceptedAnswerId="13858" CreationDate="2017-11-04T12:58:53.993" Score="0" ViewCount="124" Body="&lt;p&gt;i'm using newest elementary os with my lenovo x250 and after i installed calibre from app center it just doesn't open. I click on the icon from Application meniu and nothing happens. Help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="12429" LastActivityDate="2017-11-06T15:35:24.920" Title="Calibre doesn't start" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13830" PostTypeId="2" ParentId="9858" CreationDate="2017-11-04T16:21:33.783" Score="2" Body="&lt;p&gt;I had this problem also. Running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alsactl restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;fixed it for me, as suggested here: &lt;a href=&quot;https://askubuntu.com/a/859931/405972&quot;&gt;https://askubuntu.com/a/859931/405972&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12634" LastActivityDate="2017-11-04T16:21:33.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13831" PostTypeId="2" ParentId="13823" CreationDate="2017-11-04T16:32:59.843" Score="0" Body="&lt;p&gt;Steps to produce&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Find your wifi driver over Google (or whatever search engine you prefer)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;inside the source direct, make and install the drivers.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Reason : This is a restricted feature on NT kernel, which basically hijack propreatery drivers regardless of System shutdowns.&lt;/p&gt;&#xA;" OwnerUserId="9361" LastActivityDate="2017-11-04T16:32:59.843" CommentCount="2" CommunityOwnedDate="2017-11-04T16:32:59.843" ContentLicense="CC BY-SA 3.0" />
  <row Id="13832" PostTypeId="1" AcceptedAnswerId="13836" CreationDate="2017-11-04T18:42:41.647" Score="0" ViewCount="88" Body="&lt;p&gt;I'm building a Vala app that uses &lt;code&gt;youtube-dl&lt;/code&gt; command line. How do I make sure that it is installed when someone installs the app?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In other words: Looking at the CMake build documentation, what is the best way to add a command line dependency?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/code/getting-started#the-build-system&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/getting-started#the-build-system&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12171" LastActivityDate="2017-11-04T23:36:23.633" Title="How to add command line dependencies using CMake" Tags="|vala|cmake|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13833" PostTypeId="1" AcceptedAnswerId="13849" CreationDate="2017-11-04T18:43:30.963" Score="1" ViewCount="1848" Body="&lt;p&gt;I've just got a new Dell XPS 15 (9650) with Windows 10 on it, but I want to install ElementaryOS (&lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io&lt;/a&gt;) as the only OS (so I want to remove Windows). I created a bootable USB with Rufus and set is as default boot option in the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The screen that i get is this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zPVrc.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zPVrc.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;If I choose the option &quot;Install elementary OS&quot; I get a new screen with the E logo and nothing else. I've search this problem on the internet and I found out that it is related to the UEFI, so I found this article on Dell website (&lt;a href=&quot;http://www.dell.com/support/article/it/it/itbsdt1/sln297060/xps-13-9343--how-to-install-ubuntu-developer-edition-1404-on-a-dell-pc-configured-for-the-unified-extensible-firmware-interface--uefi--bios?lang=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.dell.com/support/article/it/it/itbsdt1/sln297060/xps-13-9343--how-to-install-ubuntu-developer-edition-1404-on-a-dell-pc-configured-for-the-unified-extensible-firmware-interface--uefi--bios?lang=en&lt;/a&gt;) that explains step by step what you need to do in order to install Ubuntu on the PC, but nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to remove the secure boot, to switch from &quot;RAID on&quot; to &quot;AHCI&quot; in the Sata Operation panel of the bios, uncheck &quot;Enable Legacy Option ROMs&quot; in the Advanced Boot Options panel, and create a new option in the boot sequence with grubx64.efi as the filename (tried also with BOOTx64.efi, but nothing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I get is the same screen with the E logo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my current configuration (after lots of tries) of the BIOS:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Boot Sequence:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;em&gt;My USB key with Elementary&lt;/em&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;em&gt;The boot option I created with &quot;\EFI\BOOT\BOOTx64.EFI&quot; as the file name&lt;/em&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Windows disk&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;p&gt;Advanced Boot Options:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Enable Legacy Option ROMs &lt;strong&gt;unchecked&lt;/strong&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Enable Attempt Legacy Boot &lt;strong&gt;unchecked&lt;/strong&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Enable UEFI Network Stack &lt;strong&gt;checked&lt;/strong&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;p&gt;UEFI Boot Path Security: &quot;Always, Except Internal HDD&quot; (possible other values: &quot;Always&quot; and &quot;Never&quot;)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Sata Operation: &quot;RAID On&quot; (possible other values: &quot;Disabled&quot; and &quot;AHCI&quot;)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Secure Boot: Enabled Fastboot: &quot;Auto&quot; (possible other values: &quot;Minimal&quot; and &quot;Thorough&quot;)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;My BIOS version is 1.5 I've read that you can start the OS installation with a nomodeset parameter, but it seems like it's not the proper solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, if you know, tell me what I need to change. &#xA;Thank you very much&lt;/p&gt;&#xA;" OwnerUserId="12636" LastEditorUserId="12636" LastEditDate="2017-11-04T19:08:15.180" LastActivityDate="2017-11-08T19:45:45.690" Title="Can't install ElementaryOS on DELL XPS 15 (9650)" Tags="|release-loki|system-installation|boot|uefi|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13834" PostTypeId="2" ParentId="13833" CreationDate="2017-11-04T19:27:46.517" Score="0" Body="&lt;p&gt;I have a Dell laptop as well (Inspiron) and I have two suggestions. First try the &quot;try&quot; elementary option to see if you can get into the OS, then install once you are in. Second, I had to disable UEFI and secure boot and enable Legacy boot. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-04T19:27:46.517" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13835" PostTypeId="1" CreationDate="2017-11-04T21:52:24.020" Score="0" ViewCount="45" Body="&lt;p&gt;Can somebody that uses vlc tell me what happens in situation described in the title?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On mine, when i start vlc after exiting in fullscreen mode, it forgets the window size that i had before going to fullscreen mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2017-11-06T14:37:27.107" Title="VLC users. What happens when you exit while in the fullscreen mode (alt+f4)? Does it start in the same size as you have before going fullscreen?" Tags="|release-loki|vlc|" AnswerCount="1" CommentCount="4" ClosedDate="2017-11-21T23:50:43.170" ContentLicense="CC BY-SA 3.0" />
  <row Id="13836" PostTypeId="2" ParentId="13832" CreationDate="2017-11-04T23:36:23.633" Score="0" Body="&lt;p&gt;Use &lt;a href=&quot;https://cmake.org/cmake/help/latest/command/find_program.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;find_program&lt;/code&gt;&lt;/a&gt; to look for the executable, then check the result. So something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find_program(YOUTUBE_DL youtube-dl)&#xA;if(NOT YOUTUBE_DL)&#xA;  message(FATAL_ERROR &quot;youtube-dl is required&quot;)&#xA;endif()&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2017-11-04T23:36:23.633" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13837" PostTypeId="2" ParentId="12966" CreationDate="2017-11-05T03:10:04.950" Score="1" Body="&lt;p&gt;edit /etc/lightdm/pantheon-greeter.conf &#xA;for example, I'm using Roboto font for the login screen&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    [greeter]&#xA;    #activate-numlock=true&#xA;    #default-wallpaper=/usr/share/backgrounds/elementaryos-default&#xA;    #high-contrast=false&#xA;    #onscreen-keyboard=false&#xA;    #screensaver-timeout=60&#xA;    font-name=Roboto 11&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12639" LastActivityDate="2017-11-05T03:10:04.950" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13838" PostTypeId="2" ParentId="13786" CreationDate="2017-11-05T04:06:50.573" Score="3" Body="&lt;p&gt;I found an answer that works for me. I can use the command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;notify-send&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info at: &lt;a href=&quot;https://wiki.archlinux.org/index.php/Desktop_notifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Desktop_notifications&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12609" LastActivityDate="2017-11-05T04:06:50.573" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13839" PostTypeId="1" CreationDate="2017-11-05T04:53:55.777" Score="1" ViewCount="87" Body="&lt;p&gt;After official kernel update, my rt8188eu chipset was not working on desktop machine. There was no wifi option in network settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I downloaded the driver from GitHub and compiled myself, and it worked. But if I turn off wifi from the the panel of elementary OS (right side), I can't turn that back on from GUI, I need to execute &quot;nmcli radio wifi on&quot; each time. (This issue existed on stocked kernel that was packed with Elementary OS too, but in my laptop, no problem at all)&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;My questions are -&lt;/h1&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&quot; Do RT8188eu chipset drivers included in Linux Kernel ? I don't think so, I tried 4.10 with headers too. &quot; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The graphical glitch in WiFi toggle button is an old but still unsolved issue. I have no idea which components are responsible for it. (I tried Arch Linux+GNOME and Linux Mint 18.1, and problem is not there.)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9361" LastActivityDate="2017-11-06T14:53:16.793" Title="RT8188eu driver problems (very old bug)" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13840" PostTypeId="2" ParentId="12048" CreationDate="2017-11-05T10:39:14.010" Score="0" Body="&lt;p&gt;Do you have tlp installed? Try removing it or blocking the bluetooth device:&#xA;&lt;a href=&quot;https://forum.manjaro.org/t/bluetooth-adapter-cannot-be-turned-on-realtek-rtl8723be/10130/32&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.manjaro.org/t/bluetooth-adapter-cannot-be-turned-on-realtek-rtl8723be/10130/32&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you have powertop installed?&#xA;Check if you set something like:&lt;/p&gt;&#xA;" OwnerUserId="7110" LastActivityDate="2017-11-05T10:39:14.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13842" PostTypeId="1" CreationDate="2017-11-05T17:07:21.727" Score="0" ViewCount="112" Body="&lt;p&gt;I've been having problems with Freya, Ubuntu 16 and Linux Mint over the last few weeks - all boot problems and all something to do with Busybox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This week I installed Loki onto 2 HDD's on my PC. One I updated and customised with packages I like to use and it suddenly refused to boot - Busybox was there and gave me the intramfs prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I rebooted onto the other HDD and ran &lt;em&gt;dpkg -L busybox&lt;/em&gt; and found it isn't there on the basic installation and my system starts perfectly on that HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do &lt;strong&gt;not&lt;/strong&gt; want Busybox, it seems to be something invented for compact devices such as phones. I read about it and find it's incredibly invasive and also has vulnerabilities that are related to Microsoft.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has caused me loads of head-banging grief. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I going to find Busybox after a Loki update or does it ship with certain packages? If so which ones please so I can avoid it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hate it so much.&#xA;I looked at Debian iso's on the Debian website and they All have it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am looking to keep my elementary system free of it or find another distro that will not include it at all.&lt;/p&gt;&#xA;" OwnerUserId="2867" LastActivityDate="2024-04-06T18:03:40.567" Title="Am I going to find Busybox after a Loki update or does it ship with certain packages? If so which ones please so I can avoid it?" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13843" PostTypeId="2" ParentId="4143" CreationDate="2017-11-05T17:22:57.657" Score="0" Body="&lt;p&gt;I have found that when busybox isn't installed I can boot but can't when it is&#xA;After fresh install enter&lt;p&gt; &lt;em&gt;dpkg -L busybox&lt;/em&gt;&lt;p&gt; into terminal and see if it's there. On my 2nd HDD Loki install, which boots just fine, it isn't there:&lt;p&gt; &lt;em&gt;~$ dpkg -L busybox&#xA;dpkg-query: package 'busybox' is not installed&lt;p&gt;&#xA;Use dpkg --info (= dpkg-deb --info) to examine archive files,&#xA;and dpkg --contents (= dpkg-deb --contents) to list their contents.&lt;p&gt;&#xA;~$ dpkg --info busybox&#xA;dpkg-deb: error: failed to read archive 'busybox': No such file or directory&lt;/em&gt;&lt;p&gt;&#xA;~$ dpkg --contents busybox&#xA;dpkg-deb: error: failed to read archive 'busybox': No such file or directory&lt;/p&gt;&#xA;" OwnerUserId="2867" LastActivityDate="2017-11-05T17:22:57.657" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13844" PostTypeId="1" AcceptedAnswerId="14420" CreationDate="2017-11-05T17:28:14.560" Score="2" ViewCount="1378" Body="&lt;p&gt;I just installed elementary OS (Loki) on a 13&quot; early &lt;strong&gt;2008 MacBook (dual boot w/ rEFInd)&lt;/strong&gt;, and so far everything works fine except &lt;strong&gt;booting up and resuming from sleep taking extraordinarily long&lt;/strong&gt; (think minutes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact, the dmesg log hints on an issue with a &lt;em&gt;drm_kms_helper&lt;/em&gt; and points to a path which seems like it’s related to the GPU (see &lt;a href=&quot;https://p3k.keybase.pub/elementary%20OS/dmesg.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;full dmesg output&lt;/a&gt; for stacktrace and more details):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[10626.784081] [drm:drm_atomic_helper_commit_cleanup_done [drm_kms_helper]] *ERROR* [CRTC:34:pipe B] flip_done timed out&#xA;[10626.888082] ------------[ cut here ]------------&#xA;[10626.888142] WARNING: CPU: 0 PID: 7509 at /build/linux-hwe-lyR8gz/linux-hwe-4.10.0/drivers/gpu/drm/drm_irq.c:1237 drm_wait_one_vblank+0x1aa/0x1b0 [drm]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;These messages repeat about 20 times per boot and seem to cost 10 seconds each if I get the dmesg output straight…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a similar error description over at &lt;a href=&quot;https://ubuntuforums.org/showthread.php?p=13664911#post13664911&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Forums&lt;/a&gt; where it is related to the &lt;strong&gt;Intel GM965 chipset&lt;/strong&gt; (which is onboard the MacBook, too – see lspci output). There, one commenter suggests to set the &lt;strong&gt;&lt;code&gt;video=SVIDEO-1:d&lt;/code&gt;&lt;/strong&gt; kernel parameter in Grub – but as I am using rEFInd I don’t know how to apply this solution in my case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course, I could be completely on the wrong track; thus, here is all the output I could possibly think of, which might be needed for the knowers out there – any help is very much appreciated:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;1. lscpu&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Architecture:          x86_64&#xA;CPU op-mode(s):        32-bit, 64-bit&#xA;Byte Order:            Little Endian&#xA;CPU(s):                2&#xA;On-line CPU(s) list:   0,1&#xA;Thread(s) per core:    1&#xA;Core(s) per socket:    2&#xA;Socket(s):             1&#xA;NUMA node(s):          1&#xA;Vendor ID:             GenuineIntel&#xA;CPU family:            6&#xA;Model:                 23&#xA;Model name:            Intel(R) Core(TM)2 Duo CPU     T8300  @ 2.40GHz&#xA;Stepping:              6&#xA;CPU MHz:               1800.000&#xA;CPU max MHz:           2400,0000&#xA;CPU min MHz:           800,0000&#xA;BogoMIPS:              4788.13&#xA;Virtualization:        VT-x&#xA;L1d cache:             32K&#xA;L1i cache:             32K&#xA;L2 cache:              3072K&#xA;NUMA node0 CPU(s):     0,1&#xA;Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm tpr_shadow vnmi flexpriority dtherm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;2. lspci -v&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)&#xA;  Subsystem: Apple Inc. Mobile PM965/GM965/GL960 Memory Controller Hub&#xA;  Flags: bus master, fast devsel, latency 0&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03) (prog-if 00 [VGA controller])&#xA;  Subsystem: Apple Inc. Mobile GM965/GL960 Integrated Graphics Controller (primary)&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 29&#xA;  Memory at d0100000 (64-bit, non-prefetchable) [size=1M]&#xA;  Memory at c0000000 (64-bit, prefetchable) [size=256M]&#xA;  I/O ports at 6110 [size=8]&#xA;  [virtual] Expansion ROM at 000c0000 [disabled] [size=128K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: i915&#xA;  Kernel modules: i915, intelfb&#xA;&#xA;00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)&#xA;  Subsystem: Apple Inc. Mobile GM965/GL960 Integrated Graphics Controller (secondary)&#xA;  Flags: fast devsel&#xA;  Memory at d0200000 (64-bit, non-prefetchable) [disabled] [size=1M]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])&#xA;  Flags: medium devsel, IRQ 20&#xA;  I/O ports at 60c0 [size=32]&#xA;  Kernel driver in use: uhci_hcd&#xA;&#xA;00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB UHCI Controller&#xA;  Flags: medium devsel, IRQ 16&#xA;  I/O ports at 60a0 [size=32]&#xA;  Kernel driver in use: uhci_hcd&#xA;&#xA;00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB2 EHCI Controller&#xA;  Flags: medium devsel, IRQ 21&#xA;  Memory at d0704c00 (32-bit, non-prefetchable) [size=1K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: ehci-pci&#xA;&#xA;00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) HD Audio Controller&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 30&#xA;  Memory at d0700000 (64-bit, non-prefetchable) [size=16K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: snd_hda_intel&#xA;  Kernel modules: snd_hda_intel&#xA;&#xA;00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 24&#xA;  Bus: primary=00, secondary=01, subordinate=01, sec-latency=0&#xA;  I/O behind bridge: 00002000-00002fff&#xA;  Memory behind bridge: d0600000-d06fffff&#xA;  Prefetchable memory behind bridge: 00000000d0800000-00000000d09fffff&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: pcieport&#xA;  Kernel modules: shpchp&#xA;&#xA;00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 25&#xA;  Bus: primary=00, secondary=02, subordinate=02, sec-latency=0&#xA;  I/O behind bridge: 00003000-00003fff&#xA;  Memory behind bridge: d0500000-d05fffff&#xA;  Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: pcieport&#xA;  Kernel modules: shpchp&#xA;&#xA;00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 26&#xA;  Bus: primary=00, secondary=03, subordinate=03, sec-latency=0&#xA;  I/O behind bridge: 00005000-00005fff&#xA;  Memory behind bridge: d0400000-d04fffff&#xA;  Prefetchable memory behind bridge: 00000000d0a00000-00000000d0bfffff&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: pcieport&#xA;  Kernel modules: shpchp&#xA;&#xA;00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB UHCI Controller&#xA;  Flags: medium devsel, IRQ 16&#xA;  I/O ports at 6080 [size=32]&#xA;  Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB UHCI Controller&#xA;  Flags: medium devsel, IRQ 18&#xA;  I/O ports at 6060 [size=32]&#xA;  Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB UHCI Controller&#xA;  Flags: bus master, medium devsel, latency 0, IRQ 21&#xA;  I/O ports at 6040 [size=32]&#xA;  Kernel driver in use: uhci_hcd&#xA;&#xA;00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) USB2 EHCI Controller&#xA;  Flags: medium devsel, IRQ 20&#xA;  Memory at d0704800 (32-bit, non-prefetchable) [size=1K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: ehci-pci&#xA;&#xA;00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])&#xA;  Flags: bus master, fast devsel, latency 0&#xA;  Bus: primary=00, secondary=04, subordinate=04, sec-latency=32&#xA;  Memory behind bridge: d0300000-d03fffff&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;&#xA;00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)&#xA;  Subsystem: Apple Inc. 82801HM (ICH8M) LPC Interface Controller&#xA;  Flags: bus master, medium devsel, latency 0&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: lpc_ich&#xA;  Kernel modules: lpc_ich&#xA;&#xA;00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])&#xA;  Subsystem: Apple Inc. 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller&#xA;  Flags: bus master, medium devsel, latency 0, IRQ 21&#xA;  I/O ports at 6108 [size=8]&#xA;  I/O ports at 6124 [size=4]&#xA;  I/O ports at 6100 [size=8]&#xA;  I/O ports at 6120 [size=4]&#xA;  I/O ports at 60e0 [size=16]&#xA;  Kernel driver in use: ata_piix&#xA;  Kernel modules: pata_acpi&#xA;&#xA;00:1f.2 SATA controller: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] (rev 03) (prog-if 01 [AHCI 1.0])&#xA;  Subsystem: Apple Inc. 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]&#xA;  Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 28&#xA;  I/O ports at 60f8 [size=8]&#xA;  I/O ports at 611c [size=4]&#xA;  I/O ports at 60f0 [size=8]&#xA;  I/O ports at 6118 [size=4]&#xA;  I/O ports at 6020 [size=32]&#xA;  Memory at d0704000 (32-bit, non-prefetchable) [size=2K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: ahci&#xA;  Kernel modules: ahci&#xA;&#xA;00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)&#xA;  Subsystem: Apple Inc. 82801H (ICH8 Family) SMBus Controller&#xA;  Flags: medium devsel&#xA;  Memory at d0705000 (32-bit, non-prefetchable) [disabled] [size=256]&#xA;  I/O ports at efa0 [size=32]&#xA;  Kernel modules: i2c_i801&#xA;&#xA;02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)&#xA;  Subsystem: Apple Inc. AirPort Extreme&#xA;  Physical Slot: 4&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;  Memory at d0500000 (64-bit, non-prefetchable) [size=16K]&#xA;  Memory at d0000000 (64-bit, prefetchable) [size=1M]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: wl&#xA;  Kernel modules: ssb, wl&#xA;&#xA;03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)&#xA;  Subsystem: Marvell Technology Group Ltd. Imac 8,1 Wired Ethernet Adapter&#xA;  Physical Slot: 5&#xA;  Flags: bus master, fast devsel, latency 0, IRQ 27&#xA;  Memory at d0400000 (64-bit, non-prefetchable) [size=16K]&#xA;  I/O ports at 5000 [size=256]&#xA;  Expansion ROM at d0420000 [disabled] [size=128K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: sky2&#xA;  Kernel modules: sky2&#xA;&#xA;04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61) (prog-if 10 [OHCI])&#xA;  Subsystem: LSI Corporation FW322/323 [TrueFire] 1394a Controller&#xA;  Flags: bus master, fast Back2Back, medium devsel, latency 248, IRQ 19&#xA;  Memory at d0300000 (32-bit, non-prefetchable) [size=4K]&#xA;  Capabilities: &amp;lt;access denied&amp;gt;&#xA;  Kernel driver in use: firewire_ohci&#xA;  Kernel modules: firewire_ohci&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;3. systemd-analyze critical-chain&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The time after the unit is active or started is printed after the &quot;@&quot; character.&#xA;The time the unit takes to start is printed after the &quot;+&quot; character.&#xA;&#xA;graphical.target @9.601s&#xA;└─multi-user.target @9.601s&#xA;  └─getty.target @9.601s&#xA;    └─getty@tty1.service @9.601s&#xA;      └─[0;1;31mrc-local.service @9.571s +4ms[0m&#xA;        └─network-online.target @9.570s&#xA;          └─[0;1;31mNetworkManager-wait-online.service @2.633s +6.936s[0m&#xA;            └─[0;1;31mNetworkManager.service @2.377s +229ms[0m&#xA;              └─dbus.service @2.321s&#xA;                └─basic.target @2.221s&#xA;                  └─sockets.target @2.219s&#xA;                    └─uuidd.socket @2.216s&#xA;                      └─sysinit.target @2.185s&#xA;                        └─swap.target @2.168s&#xA;                          └─[0;1;31mdev-mapper-cryptswap1.swap @2.150s +16ms[0m&#xA;                            └─dev-mapper-cryptswap1.device @2.147s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;4. systemd plot&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://p3k.keybase.pub/elementary%20OS/boot.jpeg&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;5. dmesg&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://p3k.keybase.pub/elementary%20OS/dmesg.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;6. Xorg.0.log&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://p3k.keybase.pub/elementary%20OS/Xorg.0.log&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;7. refind.conf&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://p3k.keybase.pub/elementary%20OS/refind.conf&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12637" LastActivityDate="2018-04-23T05:53:34.780" Title="Long boot and resume times on 2008 MacBook" Tags="|release-loki|boot|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13846" PostTypeId="2" ParentId="11265" CreationDate="2017-11-05T20:22:17.793" Score="0" Body="&lt;p&gt;I have this same problem with screen saver. After 15 minutes is turning my screen black and is logging out. &#xA; I try turn of in gnome system settings from user privileges, but it did't worked.&#xA; I try install external program &quot;light-locker-screen&quot; but i have problem with modules from  python.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I come up with idea that I will run command from terminal as super user, and run gnome-control-center. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;#&amp;lt;password&amp;gt;&#xA;gnome-control-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then go to power settings, where &quot;turn of screen when not active&quot; was set to 15 minutes, so I changed to never, and also I went to security &amp;amp; privacy settings and switch Locking off for both &quot;lock on sleep&quot; and &quot;lock after screen turns off&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that you need super-user privileges to effectively change these settings. Maybe solution is that you can only make this changes as a super user?&lt;/p&gt;&#xA;" OwnerUserId="12649" LastEditorUserId="8203" LastEditDate="2017-11-07T18:06:14.547" LastActivityDate="2017-11-07T18:06:14.547" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13847" PostTypeId="2" ParentId="4086" CreationDate="2017-11-05T20:40:46.230" Score="0" Body="&lt;p&gt;I have this same problem with screen saver. After 15 minutes is turning my screen black and is logging out. I try turn of in gnome system settings from user privileges, but it did't worked. I try install external program &quot;light-locker-screen&quot; but i have problem with modules from python.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I come up with idea that I will run command from terminal as super user, and run gnome-control-center.&#xA;sudo su&#xA;gnome-control-center&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and go to power, there was set &quot;turn of screen when not active&quot; to 15 minutes, and i changed to never, and also i go to security &amp;amp; privacy, and there from Locking I turn of &quot;lock on sleep&quot; and &quot;lock after screen turns of&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that normal user even if will switch of that options will be not affected, because super user have greater privileges. And maybe solution is to do that in super user mode?&lt;/p&gt;&#xA;" OwnerUserId="12649" LastActivityDate="2017-11-05T20:40:46.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13849" PostTypeId="2" ParentId="13833" CreationDate="2017-11-06T09:23:01.810" Score="0" Body="&lt;p&gt;I ended up launching the OS installation with nomodeset as a parameter. After installing it I couldn't reboot/shutdown the pc, so I edited the grub file (&lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;) and changed the &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; value to &lt;code&gt;nomodeset&lt;/code&gt;. Now it works nicely.&lt;/p&gt;&#xA;" OwnerUserId="12636" LastActivityDate="2017-11-06T09:23:01.810" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13850" PostTypeId="1" AcceptedAnswerId="13851" CreationDate="2017-11-06T13:51:44.433" Score="0" ViewCount="378" Body="&lt;p&gt;I've tried to use the software Bibisco (1.5.1), but can't get the app to start.&#xA;I've downloaded the package from bibisco.com (Linux 64 bit), unpacked it in a folder, but the app doesn't show in App Center. Tried starting it from terminal with the commands: &quot;bibisco&quot; and &quot;./bibisco&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone experiensesed issues like this?&lt;/p&gt;&#xA;" OwnerDisplayName="user9985" LastActivityDate="2017-11-06T16:10:20.050" Title="Bibisco won't run (elementary OS 0.4.1 Loki)" Tags="|software-installation|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13851" PostTypeId="2" ParentId="13850" CreationDate="2017-11-06T14:16:08.610" Score="1" Body="&lt;p&gt;I use Bibisco on elementaryos and it works great for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app works without installation, so it won't show in the App Center, and needs to be launched via terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;./bibisco should work, but you need to make the file executable first with either chmod u+x or by right clicking on it and selecting that option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work either, my guess is thay either the download is corrupted, or you might need the 32 bit version.&lt;/p&gt;&#xA;" OwnerDisplayName="user12189" LastEditorDisplayName="user12189" LastEditDate="2017-11-06T16:10:20.050" LastActivityDate="2017-11-06T16:10:20.050" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13852" PostTypeId="2" ParentId="13842" CreationDate="2017-11-06T14:31:20.500" Score="0" Body="&lt;p&gt;Firstly, I don't believe EOS ships with busybox by default, however there are steps you can take that should do what you require.&lt;/p&gt;&#xA;&lt;h3&gt;Instructions:&lt;/h3&gt;&#xA;&lt;p&gt;On installing Loki (or now if already installed) &lt;code&gt;sudo apt-get remove busybox&lt;/code&gt; just to make sure it isn't installed, and if so remove (if it says other packages depend on it, remove them all too).&lt;/p&gt;&#xA;&lt;p&gt;Next, try adding the below line to: &lt;code&gt;/etc/apt/preferences&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Package: busybox&#xA;Pin: release *&#xA;Pin-Priority: -1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should stop it ever appearing, and prevent you from installing anything that depends on it.&lt;/p&gt;&#xA;&lt;p&gt;You should be able to test by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install busybox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If that doesn't fail, I guess you can look at other options &lt;a href=&quot;https://www.tecmint.com/disable-lock-blacklist-package-updates-ubuntu-debian-apt/&quot; rel=&quot;nofollow noreferrer&quot;&gt;with this link&lt;/a&gt; but I think that the above pin should be enough to prevent you from ever installing it.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-11-06T14:31:20.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13853" PostTypeId="2" ParentId="13835" CreationDate="2017-11-06T14:37:27.107" Score="1" Body="&lt;p&gt;Try this, &lt;a href=&quot;https://superuser.com/a/368759/699547&quot;&gt;https://superuser.com/a/368759/699547&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open any video and resize the VLC view screen to whatever size you want. Drag the corners and then go up to the Menu-bar at the top...&#xA;Tools&gt;Preferences&gt;Interface&gt;UNCHECK &quot;Resize interface to video size&quot; and click save.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Close your video and reopen to verify the correct setup.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Its a two-step process. Drag and size your viewing screen, then UNCHECK the &quot;Resize Interface to video size&quot; and SAVE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Strictly speaking this question is off-topic for EOS stack overflow, however I've tried to answer it anyway.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-06T14:37:27.107" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13854" PostTypeId="2" ParentId="13839" CreationDate="2017-11-06T14:53:16.793" Score="2" Body="&lt;p&gt;Firstly, try downloading UKUU (the Ubunutu Kernel Update Utility), and you can try to boot into some different kernels with minimum hassle. I successfully use 4.13.10. For 4.13 you would probably need &lt;a href=&quot;https://github.com/lwfinger/rtl8188eu/issues/232&quot; rel=&quot;nofollow noreferrer&quot;&gt;this kernel patch&lt;/a&gt;, on top of driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secondly, there might be other kernel modules that need to be enabled? , &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, try filing an issue on the Github page: &lt;a href=&quot;https://github.com/lwfinger/rtl8188eu/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtl8188eu/issues&lt;/a&gt; the fact you just need to run a command, as wifi radio is failing to switch correctly, sounds like something fixable. &lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-06T14:53:16.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13855" PostTypeId="2" ParentId="13791" CreationDate="2017-11-06T15:15:24.067" Score="1" Body="&lt;h3&gt;Option 1&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Speaker icon in panel &gt; Sound settings &gt; Sound effects &gt; Mute button&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 2&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Navigate to folder: &lt;code&gt;/usr/share/sounds/freedesktop/stereo&lt;/code&gt; and change &lt;code&gt;bell.oga&lt;/code&gt; (requires sudo) to another stereo ogg sound effect&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 3&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Download the &lt;code&gt;freedesktop&lt;/code&gt; theme to your home folder &lt;a href=&quot;http://people.ubuntu.com/~dylanmccall/soundgallery/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://people.ubuntu.com/~dylanmccall/soundgallery/&lt;/a&gt; and save it in ~/.local/share/sounds/&#xA;This doesn't require sudo, and you can then edit this, and &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can go to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Speaker icon in panel &gt; Sound settings &gt; Sound effects&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And select a different sound!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this fuels your imagination and you are able to make a custom theme you are happy with!!!&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-06T15:15:24.067" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13856" PostTypeId="5" CreationDate="2017-11-06T15:31:52.753" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2017-11-06T15:31:52.753" LastActivityDate="2017-11-06T15:31:52.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13857" PostTypeId="4" CreationDate="2017-11-06T15:31:52.753" Score="0" Body="This is a special tag that is designed to be used only by the system for questions that have had all of their other tags removed. Do not add this tag to existing questions, it is reserved for use by the system to identify posts with no valid tags." OwnerUserId="8517" LastEditorUserId="8517" LastEditDate="2017-11-09T18:35:28.230" LastActivityDate="2017-11-09T18:35:28.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13858" PostTypeId="2" ParentId="13829" CreationDate="2017-11-06T15:35:24.920" Score="1" Body="&lt;p&gt;Try installing it manually. This isn't really the fault of EOS, Calibre say themselves &lt;code&gt;Please do not use your distribution provided calibre package, as those are often buggy/outdated. Instead use the Binary install described below.&lt;/code&gt; I'm guessing that's for a reason, and their old packages often don't work well, or aren't given back-ported updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall Calibre &lt;code&gt;sudo apt-get remove calibre&lt;/code&gt; should work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then &lt;a href=&quot;https://calibre-ebook.com/download_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;visit this link&lt;/a&gt; to get a binary installer of latest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope the manual install works. If it still doesn't, let me know.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-06T15:35:24.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13860" PostTypeId="2" ParentId="5207" CreationDate="2017-11-06T18:42:07.983" Score="1" Body="&lt;p&gt;This has been fixed in the stable version of Loki (now released).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-11-06T18:42:07.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13861" PostTypeId="2" ParentId="12396" CreationDate="2017-11-07T13:06:52.643" Score="1" Body="&lt;p&gt;I got it to boot with this guide &#xA;&lt;a href=&quot;https://studyblast.wordpress.com/2011/08/14/guide-mac-os-x-lion-how-to-boot-a-linux-live-system-from-a-usb-drive-how-to-update-any-ocz-ssds-firmware/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://studyblast.wordpress.com/2011/08/14/guide-mac-os-x-lion-how-to-boot-a-linux-live-system-from-a-usb-drive-how-to-update-any-ocz-ssds-firmware/&lt;/a&gt;&#xA; Try to look up the file on google - ISO-2-USB EFI-Booter for Mac 0.01 beta - Ubuntu 10.10 Live&#xA;Use the 32bit file &lt;/p&gt;&#xA;" OwnerUserId="12594" LastActivityDate="2017-11-07T13:06:52.643" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13863" PostTypeId="2" ParentId="13825" CreationDate="2017-11-07T18:49:51.333" Score="1" Body="&lt;p&gt;okay ... as suggested by Sam Morrow Drums ... adding my comment/suggestion as a solution that apparently worked for this user&lt;/p&gt;&#xA;&#xA;&lt;p&gt;just a suggestion ... i have run Loki in VirtualBox and have not had issues ... maybe the iso file is bad? Suggest you download the iso again to see it that solves the issue&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jack Dinn (opener of this question) replied that this worked.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-11-07T18:49:51.333" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13865" PostTypeId="2" ParentId="13789" CreationDate="2017-11-07T20:23:47.340" Score="2" Body="&lt;p&gt;My tool of choice is Back in Time. It's very versatile (incremental backups, local/cloud, enrypted/non encrypted etc.) and has a clear GUI that allows you to keep track of your backups and restore (complete folders or single files, as you like) very easily. It should be in the repositories if I remember correctly. If not, check here: &lt;a href=&quot;https://github.com/bit-team/backintime&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bit-team/backintime&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QBsbP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QBsbP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3112" LastActivityDate="2017-11-07T20:23:47.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13866" PostTypeId="2" ParentId="13833" CreationDate="2017-11-07T20:29:38.757" Score="0" Body="&lt;p&gt;damn ... my exact environment ... and i cannot remember how i got it working ... putting this here so I have a placeholder for when i get my BIOS configuration&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember that the hardest parts was getting it to boot correctly and getting the docking station with two additional monitors set up ... checking&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-11-07T20:29:38.757" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13867" PostTypeId="2" ParentId="12353" CreationDate="2017-11-07T20:41:03.100" Score="1" Body="&lt;p&gt;Try running in Live USB mode. If that doesn't work try this;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press e on &quot;Try ElementaryOS without installing&quot;&#xA;Go to the bottom of the boot options, and type;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;outb 0x728 1&#xA;outb 0x710 2&#xA;outb 0x740 2&#xA;outb 0x750 0&#xA;i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then press F10 and it should boot.&lt;/p&gt;&#xA;" OwnerUserId="12662" LastActivityDate="2017-11-07T20:41:03.100" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13868" PostTypeId="2" ParentId="13833" CreationDate="2017-11-07T20:58:49.317" Score="0" Body="&lt;p&gt;running Loki in same machine&#xA;see if this helps&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BIOS setting&#xA;Boot Order&#xA;    Diskette, USB Storage, CD/DVD, NIC, M.2 PCIe SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot options&#xA;     LEGACY not UEFI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Adv boot options&#xA;     Enable Legacy boot ROMs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SATA&#xA;     RAID on&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then after booting&lt;/p&gt;&#xA;&#xA;&lt;p&gt;installed&#xA;     Intel Microcode and&#xA;     NVidea-384&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for grub ... I am NOT running nomodeset ... that normally seems to work when you are having issues with monitors&#xA;but I did take quiet out&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just from memory ... i think I remember that there was an issue with the M.2 PCIe SSD ... but cannot remember where i read it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know ... I should have taken notes ... sue me ... I am the only non windows user here at work and I needed to get it working ASAP&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2017-11-07T20:58:49.317" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13869" PostTypeId="2" ParentId="13842" CreationDate="2017-11-07T21:09:18.517" Score="0" Body="&lt;p&gt;Thank you I think that it sort of takes over initialising things. I'll be careful and will see how that goes though, I would think I can still install things again without it. I've looked at a few distros and they all come with it. Loki seems alright just now. Perhaps it's because I install a few needed packages from gnome.&lt;/p&gt;&#xA;" OwnerUserId="2867" LastActivityDate="2017-11-07T21:09:18.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13870" PostTypeId="1" CreationDate="2017-11-07T21:40:26.787" Score="0" ViewCount="229" Body="&lt;p&gt;For my girlfriend I’ve put elementary on her slow windows computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is beautiful but her &lt;code&gt;Epson XP-235&lt;/code&gt; don't work! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course I’ve tried the normal way to make it print but there are no drivers. I guess, it's not in the list of Epson printers and also not listed in the open source site. I don't know how to get it installed when I downloaded it from the Epson website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the driver but it don't get it installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible for someone to give me a &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt; command so i can easily get it working?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bernard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;p.s. i'm dutch, if anyone can give me an answer in dutch it would be much easier.&lt;/p&gt;&#xA;" OwnerUserId="7035" LastEditorUserId="14940" LastEditDate="2018-12-05T23:46:24.207" LastActivityDate="2023-12-11T07:01:30.153" Title="i cant get my pson xp 235 working" Tags="|printer|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13872" PostTypeId="2" ParentId="13870" CreationDate="2017-11-07T22:22:01.597" Score="0" Body="&lt;p&gt;If you're using loki search for your printer in this site &lt;a href=&quot;http://download.ebz.epson.net/dsc/search/01/search/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://download.ebz.epson.net/dsc/search/01/search/&lt;/a&gt; and then download this three files:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;ESC/P-R Driver amd64 deb &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Epson Printer Utility amd64 deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All-in-one package Ubuntu 16.04 64-bit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Put them on the Downloads folder. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Install the gdebi package:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install gdebi&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Install by the order above the first two files: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo gdebi Downloads/&quot;file name&quot;.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Install the third file by doing this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tar xavf &quot;file name&quot;.deb.tar.gz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will create a new folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd &quot;new folder name&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;./install.sh&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;reboot the computer and your printer should be working&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2017-11-07T22:22:01.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13877" PostTypeId="1" CreationDate="2017-11-08T19:17:02.353" Score="3" ViewCount="127" Body="&lt;p&gt;I couldn't find a repository. Sorry. I felt like I was really close &lt;a href=&quot;https://elementary.io/open-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, but no.&lt;/p&gt;&#xA;" OwnerUserId="12672" LastActivityDate="2017-11-10T00:31:39.357" Title="Where's the right place to post feature requests?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ClosedDate="2018-01-08T06:20:22.943" ContentLicense="CC BY-SA 3.0" />
  <row Id="13881" PostTypeId="1" AcceptedAnswerId="14020" CreationDate="2017-11-09T06:12:16.480" Score="2" ViewCount="904" Body="&lt;p&gt;Everything was running smooth and fast till I updated my system. It is evident that the newest updates are causing this +2minutes boot time. &lt;em&gt;suspicious boot times are enclosed in asteriks&lt;/em&gt;&lt;/p&gt;&#xA;&lt;h2&gt;systemd-analyze critical-chain&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;The time after the unit is active or started is printed after the &amp;quot;@&amp;quot; character.&#xA;The time the unit takes to start is printed after the &amp;quot;+&amp;quot; character.&#xA;&#xA;graphical.target @18.892s&#xA;└─multi-user.target @18.891s&#xA;  └─getty.target @18.891s&#xA;    └─getty@tty1.service @18.891s&#xA;      **└─rc-local.service @18.880s +2ms**&#xA;        └─network-online.target @18.879s&#xA;          **└─NetworkManager-wait-online.service @12.743s +6.135s**&#xA;            └─NetworkManager.service @10.302s +2.439s&#xA;              └─dbus.service @9.724s&#xA;                └─basic.target @9.720s&#xA;                  └─sockets.target @9.720s&#xA;                    └─cups.socket @9.720s&#xA;                      └─sysinit.target @9.654s&#xA;                        **└─apparmor.service @8.608s +1.045s**&#xA;                          └─local-fs.target @8.606s&#xA;                            └─local-fs-pre.target @8.606s&#xA;                              └─systemd-tmpfiles-setup-dev.service @2.258s +1.379s&#xA;                                **└─kmod-static-nodes.service @2.147s +110ms**&#xA;                                  └─system.slice @2.128s&#xA;                                    └─-.slice @2.060s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;lscpu&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;Architecture:          x86_64&#xA;CPU op-mode(s):        32-bit, 64-bit&#xA;Byte Order:            Little Endian&#xA;CPU(s):                4&#xA;On-line CPU(s) list:   0-3&#xA;Thread(s) per core:    2&#xA;Core(s) per socket:    2&#xA;Socket(s):             1&#xA;NUMA node(s):          1&#xA;Vendor ID:             GenuineIntel&#xA;CPU family:            6&#xA;Model:                 37&#xA;Model name:            Intel(R) Core(TM) i3 CPU       M 380  @ 2.53GHz&#xA;Stepping:              5&#xA;CPU MHz:               1466.000&#xA;CPU max MHz:           2533.0000&#xA;CPU min MHz:           933.0000&#xA;BogoMIPS:              5066.70&#xA;Virtualization:        VT-x&#xA;L1d cache:             32K&#xA;L1i cache:             32K&#xA;L2 cache:              256K&#xA;L3 cache:              3072K&#xA;NUMA node0 CPU(s):     0-3&#xA;Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 popcnt lahf_lm tpr_shadow vnmi flexpriority ept vpid dtherm arat&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Yesterday though, the startup process wasn't slow as I described, and so it is now. I haven't updated or made any changes.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;: One out of two in every boot time is normal. Here's the processes' log for a normal boot time&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;graphical.target @20.069s&#xA;└─multi-user.target @20.069s&#xA;  └─getty.target @20.069s&#xA;    └─getty@tty1.service @20.069s&#xA;      └─rc-local.service @20.060s +2ms&#xA;        └─network-online.target @19.997s&#xA;          └─NetworkManager-wait-online.service @13.753s +6.243s&#xA;            └─NetworkManager.service @10.898s +2.854s&#xA;              └─dbus.service @10.274s&#xA;                └─basic.target @10.268s&#xA;                  └─sockets.target @10.268s&#xA;                    └─uuidd.socket @10.268s&#xA;                      └─sysinit.target @10.201s&#xA;                        └─apparmor.service @9.391s +809ms&#xA;                          └─local-fs.target @9.390s&#xA;                            └─local-fs-pre.target @9.390s&#xA;                              └─keyboard-setup.service @2.397s +1.450s&#xA;                                └─system.slice @2.395s&#xA;                                  └─-.slice @2.360s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Edit: you may like to use this &lt;code&gt;sed -e 's/[0\]]{2}//' chain.art&lt;/code&gt; to make the chain log look better&lt;/p&gt;&#xA;" OwnerUserId="12679" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2017-11-27T18:33:18.610" Title="Long boot time after recent updates" Tags="|updates|startup|" AnswerCount="1" CommentCount="5" ClosedDate="2018-03-11T02:00:56.760" ContentLicense="CC BY-SA 3.0" />
  <row Id="13882" PostTypeId="2" ParentId="12226" CreationDate="2017-11-09T10:13:41.080" Score="0" Body="&lt;p&gt;I would try to install pixmap with Synaptic&lt;/p&gt;&#xA;" OwnerUserId="5910" LastActivityDate="2017-11-09T10:13:41.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13883" PostTypeId="2" ParentId="13751" CreationDate="2017-11-09T12:07:24.520" Score="0" Body="&lt;p&gt;It looks like graphics driver issue to me.Could you try the graphics fix?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/4700/11922&quot;&gt;https://elementaryos.stackexchange.com/a/4700/11922&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11922" LastActivityDate="2017-11-09T12:07:24.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13886" PostTypeId="2" ParentId="12226" CreationDate="2017-11-09T15:52:22.530" Score="1" Body="&lt;p&gt;I just installed it on Loki, and it works perfectly fine. Installed it using Eddy. I got these errors too but it does not affect Draftsight starting and working normally.&lt;/p&gt;&#xA;" OwnerUserId="12595" LastActivityDate="2017-11-09T15:52:22.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13887" PostTypeId="1" CreationDate="2017-11-09T16:55:17.337" Score="1" ViewCount="15141" Body="&lt;p&gt;As mentioned on &lt;a href=&quot;https://appimage.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appimage.org/&lt;/a&gt; the recommended way to run an AppImage is to&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make it executable&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ chmod a+x Subsurface*.AppImage&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ ./Subsurface*.AppImage&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;But, I for one am having a hard time remembering this, and I can't be the only one? I find the recommendation quite user-unfriendly because it requires using the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following page explains a way to do this without the terminal.&#xA;&lt;a href=&quot;https://itsfoss.com/use-appimage-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/use-appimage-linux/&lt;/a&gt;&#xA;Right clicking the AppImage, going to Properties, going to Permissions and enabling &quot;Allow executing file as program&quot;. &#xA;Then it should be possible to simply double click the application to start it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, this &quot;Allow executing file as program&quot; option doesn't seem available in ElementaryOS. And when attempting to open it (even after making it executable using chmod) I get the Select Application window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I'm not sure why but after downloading and running the Subsurface AppImage I can also simply run the Cura AppImage...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the recommended, non terminal, way to use AppImages in ElementaryOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The specific AppImage I've tried is Ultimaker's Cura, from:&#xA;&lt;a href=&quot;https://ultimaker.com/en/products/cura-software&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ultimaker.com/en/products/cura-software&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This Blueprint might be relevant? &lt;a href=&quot;https://blueprints.launchpad.net/elementaryos/+spec/appimage-integration&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blueprints.launchpad.net/elementaryos/+spec/appimage-integration&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-11-09T17:53:04.033" LastActivityDate="2019-05-10T07:52:06.213" Title="Running AppImage (withoud terminal)" Tags="|appimage|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13888" PostTypeId="2" ParentId="13887" CreationDate="2017-11-09T17:25:54.407" Score="0" Body="&lt;p&gt;This almost certainly due to a security feature of Files which limits direct execution of files to certain content-types.  An issue has been raised about this at the Files GitHub repository so hopefully it will be fixed in the not too distant future.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a temporary workaround, it may be possible to create a .contract file for this filetype that would allow launching from the context menu (see previous questions on contracts).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-11-09T17:25:54.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13889" PostTypeId="2" ParentId="13887" CreationDate="2017-11-09T17:55:16.660" Score="3" Body="&lt;p&gt;The alternative to &quot;Allow executing file as program&quot; is enabling Execute for both Owner and Group. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also add the following contract file to &lt;code&gt;~/.local/share/contractor&lt;/code&gt; to make it somewhat easier in the future:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Make executable&#xA;MimeType=application/x-executable;&#xA;Exec=pkexec chmod +x %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-12-10T01:02:37.943" LastActivityDate="2017-12-10T01:02:37.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13891" PostTypeId="2" ParentId="13877" CreationDate="2017-11-10T00:31:39.357" Score="3" Body="&lt;p&gt;elementary is now &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;hosted on GitHub&lt;/a&gt;. So just go to the right repository and open an issue. This is the &lt;a href=&quot;https://github.com/elementary/files&quot; rel=&quot;nofollow noreferrer&quot;&gt;repository for pantheon-files&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is an example of a feature request I made for AppCenter.&#xA;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/411&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/411&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8437" LastActivityDate="2017-11-10T00:31:39.357" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13892" PostTypeId="2" ParentId="11398" CreationDate="2017-11-10T05:48:14.167" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7906/packagekitd-takes-a-lot-of-cpu-when-starting-loki&quot;&gt;This is a reported bug&lt;/a&gt;. Anyway, I commented the associated file (specifically, i had this problem with Acestream), as found in &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt;, but if you also have the habit of updating manually your package database, you can disable the automatic update by changing &lt;code&gt;APT::Periodic::Update-Package-Lists &quot;1&quot;;&lt;/code&gt; to &lt;code&gt;APT::Periodic::Update-Package-Lists &quot;0&quot;;&lt;/code&gt; in &lt;code&gt;/etc/apt/apt.conf.d/10periodic&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12684" LastActivityDate="2017-11-10T05:48:14.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13893" PostTypeId="1" CreationDate="2017-11-10T07:42:07.293" Score="0" ViewCount="341" Body="&lt;p&gt;I Couldn't play YouTube videos or make Facebook video calls on epiphany, its asking for an HTML5 video supported browser. If it does not support HTML5 then how to play that type of videos?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me to solve those problem, thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently using Loki ...&lt;/p&gt;&#xA;" OwnerUserId="5833" LastEditorUserId="18392" LastEditDate="2020-01-01T06:03:23.577" LastActivityDate="2024-01-10T19:08:15.980" Title="Facebook video calls and Youtube live video not plalyed by the default web browser?" Tags="|epiphany|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13894" PostTypeId="2" ParentId="10045" CreationDate="2017-11-10T07:51:25.590" Score="0" Body="&lt;p&gt;If you set keyboard layout switch binding to &quot;ctrl+shift&quot; then terminal bindings stop to work;)&lt;/p&gt;&#xA;" OwnerUserId="12685" LastActivityDate="2017-11-10T07:51:25.590" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13895" PostTypeId="2" ParentId="13893" CreationDate="2017-11-10T08:35:52.800" Score="0" Body="&lt;p&gt;As far as I know, it has been resolved in epiphany 3.26 (My Arch Linux GNOME)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unless elementary OS 0.5 rolls up, You can continue with Chromium or Firefox (I recommend chromium due to Web kit + GTK bindings)&lt;/p&gt;&#xA;" OwnerUserId="9361" LastActivityDate="2017-11-10T08:35:52.800" CommentCount="0" CommunityOwnedDate="2017-11-10T08:35:52.800" ContentLicense="CC BY-SA 3.0" />
  <row Id="13896" PostTypeId="1" CreationDate="2017-11-10T12:00:39.517" Score="0" ViewCount="215" Body="&lt;p&gt;My question isn't how to prevent screen locks/screen turning off / suspend, that question is answered here: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/880/prevent-screen-locking-while-watching-videos/881#881&quot;&gt;Prevent screen locking while watching videos&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is shouldn't this be solved on an OS level? Doesn't the OS  know whether a video is playing? Or have an API that an application can prevent suspension?&#xA;Shouldn't the OS have options in its Power settings for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Approaches like LightOn.sh, check running processes for specific applications. It, for example, has separate checks for fullscreen flash and the HTML 5 video player for specifically Firefox, Chromium, Chrome, Opera etc. It requires checks for specific video players. That seems very fragile and not scalable?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the reason may be that it's a security concern? That is an application can prevent a screen lock it leaves a computer more prone to intrusion?&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="12361" LastEditDate="2017-11-11T17:41:45.673" LastActivityDate="2017-11-11T19:27:58.993" Title="Screen lock prevention when playing video on OS level?" Tags="|settings|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13897" PostTypeId="1" AcceptedAnswerId="13913" CreationDate="2017-11-10T14:26:50.070" Score="0" ViewCount="279" Body="&lt;p&gt;I installed Code (the new Scratch) via the instructions &lt;a href=&quot;https://github.com/elementary/scratch&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. I also created an alias in my .bashrc file to launch it for purposes of running as su:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias code = 'io.elementary.code'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately the alias does not work. And I can no longer launch Scratch via the terminal (errors out). Therefore I can no longer edit text files in su. Sure I can install GEdit or run VIM or whatever, but I don't want to use those. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Assistance please :)&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-14T10:41:15.153" Title="Can't launch Code via alias" Tags="|code|text|editor|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13900" PostTypeId="2" ParentId="396" CreationDate="2017-11-11T13:32:34.607" Score="1" Body="&lt;p&gt;I use devilspie like in Gabriel's answer, only I like to be able to restore my windows with the same script, so my devilspie script looks like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(begin&#xA;  (if (matches (window_property &quot;_NET_WM_STATE&quot;) &quot;_NET_WM_STATE_HIDDEN&quot;)&#xA;  (begin&#xA;  (unminimize)&#xA;  (quit)&#xA;  )&#xA;  (begin &#xA;  (minimize)&#xA;  (quit)&#xA;  )&#xA;  )&#xA;  (quit)&#xA;  )&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Everything else is the same as Gabriel's answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only problem is it does not keep my windows in the same order when it restores them.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2017-11-11T13:32:34.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13902" PostTypeId="1" CreationDate="2017-11-11T19:08:31.917" Score="0" ViewCount="45" Body="&lt;p&gt;Question about display.  I am guessing I have an issue with driver/firmware for display.  System was fine, updated last nite....turned on HP Pavilion this morning and it will not boot. Says firmware bug with a slightly dotted green line stuck on screen.  Not sure what the update did.  This is with Elementary 38.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I boot Elementary 37 it boots ok and my display is fine.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone provide some insight for linux newbie?  Not sure what last update did but my pc does not like it.  Booted in safe mode today and downloaded earlier update to see if it was fixed but it was not.  I am pretty new to linux...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="12698" LastActivityDate="2018-02-26T00:52:50.763" Title="Wont boot up after update last night" Tags="|display|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2018-03-11T02:01:38.093" ContentLicense="CC BY-SA 3.0" />
  <row Id="13903" PostTypeId="2" ParentId="13896" CreationDate="2017-11-11T19:27:58.993" Score="1" Body="&lt;p&gt;TL;DR It's up to apps to tell the system that they want to block sleep&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that there's no way to know the semantic content of an audio or video stream without the app declaring it. You and I know that we don't want the computer to suspend in the middle of a movie, but the computer doesn't know the difference between a movie and a visualizer or white noise or some other kind of background stream that we don't care about interrupting. As far as the computer is concerned, they are the same thing. So it's up to the app playing audio or video to know what their purpose is semantically and to block sleep when appropriate.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-11-11T19:27:58.993" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13909" PostTypeId="1" CreationDate="2017-11-14T00:11:28.987" Score="1" ViewCount="11244" Body="&lt;p&gt;I have been experiencing a crackling sound after enabling the PulseAudio Equalizer.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="84" LastEditDate="2018-05-11T08:10:31.750" LastActivityDate="2018-05-11T08:13:26.857" Title="How to fix crackling sound in PulseAudio" Tags="|sound|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="13913" PostTypeId="2" ParentId="13897" CreationDate="2017-11-14T10:41:15.153" Score="2" Body="&lt;p&gt;Try removing the spaces between the equals sign.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So change:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias code = 'io.elementary.code'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias code='io.elementary.code'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12721" LastActivityDate="2017-11-14T10:41:15.153" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13914" PostTypeId="1" CreationDate="2017-11-14T15:41:24.853" Score="1" ViewCount="933" Body="&lt;p&gt;I want to stop the monitor from turning off in the login and lock screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the lightdm config file there is this line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;screensaver-timeout=&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to put a value of 0 and -1, but both make the screen turn off after 10 minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the value to stop the monitor turn off?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2018-02-12T18:49:44.767" Title="What value should lightdm have in screensaver-timeout= to stop the monitor from turning off?" Tags="|greeter|lock|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13915" PostTypeId="1" CreationDate="2017-11-14T16:06:40.423" Score="1" ViewCount="46" Body="&lt;p&gt;How to change so audience does not load subtitles automatically? Where is the config file?&lt;/p&gt;&#xA;" OwnerUserId="12722" LastEditorUserId="16827" LastEditDate="2019-04-11T06:31:21.600" LastActivityDate="2019-04-11T06:31:21.600" Title="Audience settings turn off loading subtitles" Tags="|audience|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13916" PostTypeId="1" CreationDate="2017-11-14T16:31:21.007" Score="1" ViewCount="276" Body="&lt;p&gt;I have a problem with updating my Elementary OS system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on the button &quot;update&quot; of the &quot;operating system updates&quot; in the appcenter of Elementary os, the update gets &quot;cancelled&quot;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/wWUK3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wWUK3.png&quot; alt=&quot;Updating system updates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try a second time, it gets cancelled too and I get this strange situation.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/iDICl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iDICl.png&quot; alt=&quot;After updating system updates second time&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then if I try to update in the terminal, I get the message that there are some dependencies not ok.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;peter@peter-DP505-DM515:~$ sudo apt full-upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; libperl5.22 : Breaks: libperl5.22:i386 (!= 5.22.1-9) but 5.22.1-9ubuntu0.2 is installed&#xA; libperl5.22:i386 : Breaks: libperl5.22 (!= 5.22.1-9ubuntu0.2) but 5.22.1-9 is installed&#xA; perl : Depends: libperl5.22 (= 5.22.1-9ubuntu0.2) but 5.22.1-9 is installed&#xA;E: Unmet dependencies. Try using -f.&#xA;peter@peter-DP505-DM515:~$ sudo apt full-upgrade -f&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;Calculating upgrade... Done&#xA;The following packages will be upgraded:&#xA;  libperl5.22&#xA;1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;2 not fully installed or removed.&#xA;Need to get 0 B/3391 kB of archives.&#xA;After this operation, 12,3 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] Y&#xA;(Reading database ... 304486 files and directories currently installed.)&#xA;Preparing to unpack .../libperl5.22_5.22.1-9ubuntu0.2_amd64.deb ...&#xA;Unpacking libperl5.22:amd64 (5.22.1-9ubuntu0.2) over (5.22.1-9) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libperl5.22_5.22.1-9ubuntu0.2_amd64.deb (--unpack):&#xA; trying to overwrite shared '/usr/share/doc/libperl5.22/changelog.Debian.gz', which is different from other instances of package libperl5.22:amd64&#xA;dpkg-deb: error: subprocess paste was killed by signal (Broken pipe)&#xA;Processing triggers for man-db (2.7.5-1) ...&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/libperl5.22_5.22.1-9ubuntu0.2_amd64.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;peter@peter-DP505-DM515:~$&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to uninstall something, delete something or install a newer version of an item that is not monitored by the appcenter to be able to get my updates again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for the help! &lt;/p&gt;&#xA;" OwnerUserId="9548" LastActivityDate="2017-11-15T18:17:17.800" Title="Running &quot;operating system updates&quot; in appcenter of Elementary gets cancelled" Tags="|updates|system|appcenter|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13917" PostTypeId="2" ParentId="13914" CreationDate="2017-11-14T17:18:10.520" Score="1" Body="&lt;p&gt;the Elementary OS answer to this (instead of the terminal answer) is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;settings -&amp;gt; power -&amp;gt; set to never turn off monitor!&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-14T17:18:10.520" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13918" PostTypeId="1" CreationDate="2017-11-14T20:04:22.290" Score="1" ViewCount="18" Body="&lt;p&gt;If i go to the printer settings, i can check the printed history.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to remove and not store this past printed jobs?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2017-11-14T20:04:22.290" Title="Is there a way to not record what have been printed in the past?" Tags="|release-loki|printer|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13920" PostTypeId="1" CreationDate="2017-11-15T11:26:50.933" Score="2" ViewCount="271" Body="&lt;p&gt;Is it possible to preview EXR or HDR files in Pantheon Files, thumbnails? It works great with KDE Neon and Dolphin.&lt;/p&gt;&#xA;" OwnerUserId="12595" LastEditorUserId="84" LastEditDate="2018-05-06T17:41:07.810" LastActivityDate="2019-06-01T20:04:15.647" Title="Preview EXR or HDR images in Pantheon Files" Tags="|pantheon-files|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13921" PostTypeId="2" ParentId="13916" CreationDate="2017-11-15T15:24:25.143" Score="1" Body="&lt;p&gt;I found this solution &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/perl/+bug/1574351&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/share/doc/libperl5.22/changelog.Debian.gz&#xA;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I hope this fixes it for you too!&lt;/p&gt;&#xA;" OwnerUserId="486" LastActivityDate="2017-11-15T15:24:25.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13922" PostTypeId="1" CreationDate="2017-11-15T16:54:25.343" Score="0" ViewCount="489" Body="&lt;p&gt;This problem happens consistently. If I try to download a document from a web page, it does the download but, the browser freezes and I have to restart it. Same thing happens when I upload a picture. It uploads it but Chrome freezes. I have no problems with either Firefox or Opera browsers. Your help to solve this is appreciated.&#xA;My OS version is elementary OS 0.3.2 Freya (64-bit) and Chrome version is:Version 62.0.3202.94 (Official Build) (64-bit)&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2024-03-15T12:01:00.103" Title="Chrome browser freezes after uploading/downloading files" Tags="|release-freya|google-chrome|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13923" PostTypeId="2" ParentId="13922" CreationDate="2017-11-15T17:46:42.813" Score="0" Body="&lt;p&gt;Workaround to solve this problem is found on:&#xA;&lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=716892#c5&quot; rel=&quot;nofollow noreferrer&quot;&gt;Issue 716892&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2770" LastActivityDate="2017-11-15T17:46:42.813" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13924" PostTypeId="2" ParentId="13916" CreationDate="2017-11-15T18:17:17.800" Score="0" Body="&lt;p&gt;I had a similar issue today not elementaryOS, but on Ubuntu 16.04, also with amd64 as a foreign architecture.  There seems to be a conflict between the two architectures which I don't think should happen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just deleted &lt;code&gt;/usr/share/doc/libperl5.22/changelog.Debian.gz&lt;/code&gt; and re-ran &lt;code&gt;apt full-upgrade -f&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12728" LastActivityDate="2017-11-15T18:17:17.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13925" PostTypeId="2" ParentId="13920" CreationDate="2017-11-15T18:48:29.447" Score="1" Body="&lt;p&gt;I had a somewhat similar question before: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12747/file-that-handles-raw-thumbnails-in-files?s=2|52.1672&quot;&gt;File that handles raw thumbnails in Files&lt;/a&gt;, but I didn't get a useful answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was considering a Sigma camera and I wanted the camera raw thumbnails in pantheon-files, but I've changed my mind about the Sigma anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only editable thumbnails files I could find were &lt;code&gt;/etc/xdg/tumbler/tumbler.rc&lt;/code&gt; and &lt;code&gt;/usr/share/thumbnailers/evince.thumbnailer&lt;/code&gt;. You can try those, but they didn't work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another workaround is installing Nautilus, then create the file &lt;code&gt;/usr/share/thumbnailers/raw.thumbnailer&lt;/code&gt; and add the &lt;code&gt;mimetype&lt;/code&gt; for the HDR files in it. I'll give you details about it, if you want.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="14940" LastEditDate="2019-01-02T14:06:03.257" LastActivityDate="2019-01-02T14:06:03.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13930" PostTypeId="1" CreationDate="2017-11-16T18:34:33.600" Score="1" ViewCount="164" Body="&lt;p&gt;I noticed a very annoying bug after completing a fresh OEM installation. After booting and setting up a user profile from the oem-config, it seems that some of the date and time packages are getting removed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the time won't switch from 24h to 12h. I even tried to change the settings in dconf but had no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I missing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I do a normal installation, everything works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vngfP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vngfP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="5726" LastEditDate="2017-11-18T13:09:47.343" LastActivityDate="2018-06-17T07:03:05.867" Title="Time stuck in 24h mode after installing from OEM (loki 0.4.1)" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13934" PostTypeId="2" ParentId="8405" CreationDate="2017-11-17T00:18:12.870" Score="0" Body="&lt;p&gt;The short answer is &quot;No&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's technically possible to replace Gala with Compiz, probably, but you will break/lose notifications, the dynamic panel, wallpaper, many operations involving shortcuts, etc etc. You would have to replace each of these functions with something else to have a usable desktop again.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-11-17T00:18:12.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13936" PostTypeId="1" CreationDate="2017-11-17T21:06:40.890" Score="0" ViewCount="104" Body="&lt;p&gt;I would like to set up an elementary on SSD. What kind of settings should I set?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not speak english I use translation. according to him you write simple: D&lt;/p&gt;&#xA;" OwnerUserId="12743" LastActivityDate="2017-11-17T21:48:12.687" Title="SSD and Elemantary?" Tags="|ssd|" AnswerCount="1" CommentCount="0" ClosedDate="2017-11-21T23:47:51.000" ContentLicense="CC BY-SA 3.0" />
  <row Id="13938" PostTypeId="2" ParentId="13936" CreationDate="2017-11-17T21:48:12.687" Score="0" Body="&lt;p&gt;Nothing special is required for an SSD. Just install as normal.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-17T21:48:12.687" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13939" PostTypeId="1" CreationDate="2017-11-18T01:08:05.447" Score="2" ViewCount="138" Body="&lt;p&gt;I've always been able to turn the screen off by lowering the screen brightness. The last step would turn the screen off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But since I recently did a firmware upgrade using fwupdmgr this doesn't work anymore. The screen's brightness simply goes one level lower.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The device which I upgraded:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UEFI-124c207d-5db8-4d95-bd31-34fd971b34f9-dev0&#xA;  Guid:                 124c207d-5db8-4d95-bd31-34fd971b34f9&#xA;  DisplayName:          XPS 15 9550&#xA;  Provider:             UEFI&#xA;  Flags:                internal|allow-offline|require-ac&#xA;  Version:              0.1.4.0&#xA;  VersionLowest:        0.1.4.0&#xA;  Created:              2017-10-22&#xA;  Trusted:              none&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have a Dell XPS 15 9550 running Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/sys/class/backlight/intel_backlight/brightness&lt;/code&gt; contains 1 at the lowest brightness. I can fill it with 0 manually, which does turn the screen off, I just can't do that with my brightness keys.&lt;br&gt;&#xA;&lt;code&gt;cat /sys/class/backlight/intel_backlight/max_brightness&lt;/code&gt; contains 1500. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone experiencing the same issue? Is this changeable in configuration maybe? &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-11-19T14:01:45.057" LastActivityDate="2023-04-26T01:04:35.543" Title="Screen doesn't turn off after firmware upgrade" Tags="|display|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13940" PostTypeId="2" ParentId="12001" CreationDate="2017-11-18T12:22:24.543" Score="1" Body="&lt;p&gt;I would try the &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor app&lt;/a&gt;, it's a Elementary OS specific app that makes editing those desktop files easy.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-18T12:22:24.543" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13942" PostTypeId="2" ParentId="13939" CreationDate="2017-11-18T15:10:42.073" Score="1" Body="&lt;p&gt;So I wouldn't really call this a solution, more a workaround. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some research on how I could control my display, found interesting answers in: &#xA;&lt;a href=&quot;https://askubuntu.com/questions/62858/turn-off-monitor-using-command-line&quot;&gt;https://askubuntu.com/questions/62858/turn-off-monitor-using-command-line&lt;/a&gt;&#xA;&lt;code&gt;xset&lt;/code&gt; for example would always turn off all screens. &#xA;&lt;code&gt;xrandr&lt;/code&gt; seemed to also log me out sometimes&#xA;Both the the above would be canceled on key presses and mouse movement. They also seemed to be overruled by Redshift. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I learned about &lt;code&gt;xbacklight&lt;/code&gt; from: &lt;a href=&quot;https://askubuntu.com/a/149265/519324&quot;&gt;https://askubuntu.com/a/149265/519324&lt;/a&gt;.&#xA;After a &lt;code&gt;sudo apt install xbacklight&lt;/code&gt; I could control the brightness like I hoped. &#xA;The following would set the brightness (of my main display) to actual 0 and let me turn it up again with my regular brightness meta keys. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xbacklight -set 0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now I've put that command under the  keyboard shortcut: &lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;Monitor brightness down&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't overrule my regular &lt;code&gt;Monitor brightness down&lt;/code&gt;, for some reason &lt;code&gt;Disabled&lt;/code&gt; would be shown. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also learned using &lt;code&gt;xbacklight -get&lt;/code&gt; that the lowest brightness I could reach with just the brightness meta keys was &lt;code&gt;0.066667&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A better solution would be to make sure the brightness controlling meta keys could simply lower to 0...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: It appears that there have been lot's of discussions on whether screens should turn off at the lowest brightness. &#xA;&lt;a href=&quot;https://github.com/mate-desktop/mate-power-manager/issues/179#issuecomment-170062936&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mate-desktop/mate-power-manager/issues/179#issuecomment-170062936&lt;/a&gt;&#xA;There doesn't really seem to be a clear way to configure this...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2&lt;/strong&gt;: It's been a while, but sadly after a bios update using &lt;a href=&quot;https://fwupd.org/lvfs/docs/users&quot; rel=&quot;nofollow noreferrer&quot;&gt;fwupdmgr&lt;/a&gt; the &lt;code&gt;xbacklight&lt;/code&gt; command stopped having any effect. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-12-17T15:02:01.847" LastActivityDate="2018-12-17T15:02:01.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13946" PostTypeId="2" ParentId="13930" CreationDate="2017-11-18T18:13:07.320" Score="1" Body="&lt;p&gt;Solved it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Had to install wingpanel-indicator-datetime_2.0.2+r223+pkg11~daily from the daily ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily/+sourcepub/8449080/+listing-archive-extra&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/daily/+sourcepub/8449080/+listing-archive-extra&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works now&lt;/p&gt;&#xA;" OwnerUserId="5726" LastActivityDate="2017-11-18T18:13:07.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13947" PostTypeId="2" ParentId="8600" CreationDate="2017-11-18T21:54:27.457" Score="0" Body="&lt;p&gt;Same symptoms here, running Ubuntu.  Turns out the italic version of the font was not installed properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Ubuntu, reinstalling the package &lt;code&gt;fonts-freefont-ttf&lt;/code&gt; fixed the problem.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall fonts-freefont-ttf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12749" LastActivityDate="2017-11-18T21:54:27.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13948" PostTypeId="1" CreationDate="2017-11-19T11:39:19.620" Score="1" ViewCount="621" Body="&lt;p&gt;I want to type Bangla. I've downloaded iBus-Avro and added it on iBus input method but current keyboard configuration uses the same old one not iBus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is iBus broken on 0.4.1 ?? &lt;/p&gt;&#xA;" OwnerUserId="12752" LastEditorUserId="308" LastEditDate="2019-12-19T19:34:15.133" LastActivityDate="2023-12-29T11:04:30.497" Title="how to use iBus in elementary OS 0.4.1?" Tags="|ibus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13950" PostTypeId="2" ParentId="2510" CreationDate="2017-11-19T13:58:41.683" Score="0" Body="&lt;p&gt;Now there exists this app:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor.desktop&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Very useful!&lt;/p&gt;&#xA;" OwnerUserId="12754" LastActivityDate="2017-11-19T13:58:41.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13952" PostTypeId="1" CreationDate="2017-11-19T16:37:01.763" Score="0" ViewCount="129" Body="&lt;p&gt;After doing a dist-upgrade Firefox got updated to the latest version, how can I go back to the previous version?&lt;/p&gt;&#xA;" OwnerUserId="12759" LastActivityDate="2017-11-19T19:15:15.330" Title="How can I roll back Firefox back to previous version?" Tags="|apt|package-management|firefox|package|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13953" PostTypeId="2" ParentId="13952" CreationDate="2017-11-19T17:53:12.797" Score="2" Body="&lt;p&gt;Install Synaptic Package Manager&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install synaptic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;launch the program and search for firefox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;select it, then select Package at the top&lt;/p&gt;&#xA;&#xA;&lt;p&gt;select Force Version...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;from the pull down select the version you want&lt;/p&gt;&#xA;&#xA;&lt;p&gt;click Apply&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-19T17:53:12.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13954" PostTypeId="2" ParentId="13952" CreationDate="2017-11-19T19:09:01.903" Score="2" Body="&lt;p&gt;I'm not sure if &lt;strong&gt;&lt;em&gt;Sean Patterson&lt;/em&gt;&lt;/strong&gt;'s answer is enough to prevent it from being updated by the AppCenter in the future.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hence, I'd also mark the package as held back using ‘apt-mark’ command in terminal with root privileges.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, making your package say &lt;strong&gt;&lt;em&gt;Firefox&lt;/em&gt;&lt;/strong&gt; unavailable for install, up-gradation or uninstall, type:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;apt-mark hold firefox&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make this package available for update, just replace ‘hold‘ with ‘unhold‘.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;apt-mark unhold firefox&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.tecmint.com/disable-lock-blacklist-package-updates-ubuntu-debian-apt/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12760" LastEditorUserId="12760" LastEditDate="2017-11-19T19:15:15.330" LastActivityDate="2017-11-19T19:15:15.330" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13955" PostTypeId="1" CreationDate="2017-11-19T22:41:45.033" Score="1" ViewCount="88" Body="&lt;p&gt;During the Elementary OS installation process I checked the &quot;Replace empty disk space&quot; option in the disk encryption settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation the disk size shows 109 GB free. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should the disk not show as completely full because of cryptography?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how can I verify that I performed the installation by replacing empty disk space?&lt;/p&gt;&#xA;" OwnerDisplayName="user12762" LastEditorUserId="84" LastEditDate="2018-05-06T17:40:00.147" LastActivityDate="2024-04-06T12:01:55.203" Title="Disk size reported incorrectly after install with HDD encryption and replace empty disk space" Tags="|disk-management|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13957" PostTypeId="2" ParentId="13955" CreationDate="2017-11-20T10:10:14.227" Score="0" Body="&lt;p&gt;Replacing empty disk space just means a full wipe when you re-format a hard disk. It means that sectors are not just marked as empty but also have random noise so that you can't &quot;un-delete&quot; existing files. This doesn't reduce file-system size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you look at the Disks utility in applications, you should see at least a  a partition table (this shows you the overview of your whole disk), the root partition (the largest normally), and a swap partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, when you encrypt a disk you will lose space, because your data takes up more space, but that won't reduce the space available on the drive. The total available space is based on the drive itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You probably have several GB dedicated to swap (which enables a portion of your disk to function as RAM essentially).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this answers your question.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-20T10:10:14.227" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13958" PostTypeId="1" CreationDate="2017-11-20T13:59:49.317" Score="0" ViewCount="188" Body="&lt;p&gt;I am told that you do not support the ryzen cpu at this time.  Is that something I will see soon?&lt;/p&gt;&#xA;" OwnerUserId="12768" LastActivityDate="2017-11-20T15:46:23.883" Title="When will we get Ryzen support?" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ClosedDate="2017-11-21T23:48:58.387" ContentLicense="CC BY-SA 3.0" />
  <row Id="13959" PostTypeId="2" ParentId="13958" CreationDate="2017-11-20T15:46:23.883" Score="0" Body="&lt;p&gt;That depends on the kernel. I see that there are stability issues with Ryzen on Ubuntu 16.04, which elementary Loki is based. There are some work-arounds to get it stable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I would recommend is running elementary from a live USB for a bit to see how well it performs. If it does run ok you should be good.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-20T15:46:23.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13963" PostTypeId="1" AcceptedAnswerId="14060" CreationDate="2017-11-21T03:21:30.893" Score="0" ViewCount="161" Body="&lt;p&gt;I'm using cmake and following the instructions per Elementary OS site (&lt;a href=&quot;https://elementary.io/docs/code/getting-started#building-and-installing-with-cmake&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/getting-started#building-and-installing-with-cmake&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything looks good when compiling the app, but when building and installing the app the styles are missing. Perhaps I'm missing a step? Here's my code:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;var css_provider = new Gtk.CssProvider();&#xA;try {&#xA;    css_provider.load_from_path(&quot;style.css&quot;);&#xA;  } catch (GLib.Error e) {&#xA;    stderr.printf(&quot;%s&quot;, e.message);&#xA;  }&#xA;  Gtk.StyleContext.add_provider_for_screen(Gdk.Screen.get_default(), css_provider, Gtk.STYLE_PROVIDER_PRIORITY_USER);&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12171" LastActivityDate="2017-12-03T03:53:24.327" Title="Missing styles when building app using Gtk.CssProvider" Tags="|gtk|vala|cmake|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13967" PostTypeId="1" CreationDate="2017-11-21T14:18:23.867" Score="1" ViewCount="765" Body="&lt;p&gt;Please tell me there is a way to enable onscreen keyboard during login? It used to be in Freya but Loki has many basic things either hidden or just impossible to do anymore? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please how can I enable it on the login screen as well.&lt;/p&gt;&#xA;" OwnerUserId="5822" LastActivityDate="2024-04-03T11:02:05.227" Title="onscreen keyboard on login" Tags="|release-loki|settings|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13969" PostTypeId="1" AcceptedAnswerId="13970" CreationDate="2017-11-21T20:57:06.133" Score="3" ViewCount="4231" Body="&lt;p&gt;i have this problem and i can't figure it out how can i resolve it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it's a Elementary OS... i don't know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I running VMware Workstation (Trial version) on my Elementary OS (0.4.1 Loki), and when i try to power on any virtual machine, the screen messed up :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fntk8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fntk8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed every installation guide but everytime this problem occur.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My version of VMware Workstation is: 14.0.0 build-6661328 - Workstation pro 14&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system detail: Intel Core i7 - 2.0 ghz - RAM 8gb - 16.04.1-Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem occured everytime with every guest os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me to understand why this occured and how i can resolve it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ask you apology for my english&lt;/p&gt;&#xA;" OwnerUserId="12780" LastEditorUserId="15904" LastEditDate="2020-02-16T17:07:45.497" LastActivityDate="2020-04-06T06:17:41.990" Title="Screen mess up - VMware Workstation on Elementary OS" Tags="|release-loki|display|applications|" AnswerCount="8" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13970" PostTypeId="2" ParentId="13969" CreationDate="2017-11-21T21:22:29.753" Score="2" Body="&lt;p&gt;VMware 'upgraded' how it works. I have the same issue. The best version to use on Elementary is VMware Workstation 12. I have a copy; I will see if I can link to after I upload it. This is an issue with a VMware update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;VMware-Player-12.5.6-5528349.x86_64.bundle&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://mega.nz/#!YtZCBThI!1n-CDBDvjWmEpJNu0vqhXUFF9K6z_Qd6M-KG8kh_aQg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mega.nz/#!YtZCBThI!1n-CDBDvjWmEpJNu0vqhXUFF9K6z_Qd6M-KG8kh_aQg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="9052" LastEditDate="2017-11-21T21:33:23.683" LastActivityDate="2017-11-21T21:33:23.683" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13971" PostTypeId="1" CreationDate="2017-11-21T21:41:09.213" Score="2" ViewCount="3895" Body="&lt;p&gt;Since firefox update to 57 none of hide titlebar addons work. &#xA;Is there a way to merge title bar with tabs, so that lines in picture provided belove becomes one?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PxPMx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PxPMx.png&quot; alt=&quot;firefox title bar merge&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried merging with firefox settings, but somewhy it doesn't work.&#xA;Also I have tried using maximus, but that didn't work for me either.&lt;/p&gt;&#xA;" OwnerUserId="12429" LastActivityDate="2018-05-11T12:38:11.673" Title="Firefox title bar and tabs merge" Tags="|firefox|user-interface|web-browser|internet-browser|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="13972" PostTypeId="1" AcceptedAnswerId="13998" CreationDate="2017-11-21T21:44:16.670" Score="0" ViewCount="97" Body="&lt;p&gt;i have this problem: when i create some directory, especially the external hard disk directory, my terminal highlights the name of every directories, like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L2rJm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L2rJm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how can i erase those highlight?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary os 0.4.1 Loki&lt;/p&gt;&#xA;" OwnerUserId="12780" LastActivityDate="2018-03-28T01:39:27.193" Title="Terminal - highlighted text problem" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="13974" PostTypeId="1" CreationDate="2017-11-22T07:28:44.723" Score="0" ViewCount="124" Body="&lt;p&gt;My laptop is basically unusable after waking up because the keyboard freezes. The only difference between waking up after suspend and waking up after halt is that after halting, even the lock screen doesn't show up (only the elementary os logo stays on screen for like forever). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I go about fixing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Side note: what is a good resource for understanding how the OS is put together? If I encounter a problem I want to be able to figure out the location of the relevant files and how they work so that I can fix or change things on my own.  &lt;/p&gt;&#xA;" OwnerUserId="8377" LastActivityDate="2024-03-21T21:02:55.367" Title="My keyboard completely freezes after halt/suspend (Loki 0.4.1). How do I fix this?" Tags="|greeter|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13975" PostTypeId="2" ParentId="11658" CreationDate="2017-11-22T09:45:35.217" Score="1" Body="&lt;p&gt;You are getting that error because you don't have the key to authenticate the repo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first command downloads the public key from the source and adds to your apt sources keyring.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wget -qO - ftp://ftp.mondorescue.org/ubuntu/16.04/mondorescue.pubkey | sudo apt-key add -&#xA;$ wget ftp://ftp.mondorescue.org/ubuntu/16.04/mondorescue.sources.list&#xA;$ sudo sh -c &quot;cat mondorescue.sources.list &amp;gt;&amp;gt; /etc/apt/sources.list&quot; &#xA;$ sudo apt update &#xA;$ sudo apt install mondo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user8124" LastActivityDate="2017-11-22T09:45:35.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13976" PostTypeId="2" ParentId="13974" CreationDate="2017-11-22T11:11:27.767" Score="0" Body="&lt;p&gt;it's possibly a power management issue.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;does removing the keyboard and plugging it back in resolve the issue? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for resources I find the Arch wiki pages to be well written, some of the information needs to be changed because ubuntu uses a different folder stucture, but most of the info still applies.  &lt;a href=&quot;https://wiki.archlinux.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's also the Ubuntu manual pages. &lt;a href=&quot;http://manpages.ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://manpages.ubuntu.com/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12306" LastActivityDate="2017-11-22T11:11:27.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13977" PostTypeId="2" ParentId="4318" CreationDate="2017-11-22T12:49:09.367" Score="0" Body="&lt;p&gt;This will set the default new tab's path to that of the previous tab&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.terminal.settings follow-last-tab true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12787" LastActivityDate="2017-11-22T12:49:09.367" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13978" PostTypeId="2" ParentId="12888" CreationDate="2017-11-22T13:15:00.060" Score="1" Body="&lt;p&gt;If you go to /opt/pt/bin and run PacketTracer7 manually it will give you a better idea of what is going on. I had to install some missing dependencies that weren't installed by the install script. This is what worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libqt5webkit5 libqt5script5 libqt5scripttools5 libqt5xml5 libqt5multimedia5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am running Elementary OS Loki with the 64bit version of Packet Tracer 7.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I have not been able to get it to run using: /opt/pt/packettracer however it's been running great using /opt/pt/bin/PacketTracer7&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also instead of using the Cisco-PacketTracer.desktop I used the Main Menu application to create the shortcut in my applications bin. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the config I used for that:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Uv63q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Uv63q.png&quot; alt=&quot;Launcher Properties&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12788" LastEditorUserId="12788" LastEditDate="2017-11-22T13:36:59.857" LastActivityDate="2017-11-22T13:36:59.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13980" PostTypeId="1" AcceptedAnswerId="13982" CreationDate="2017-11-22T15:23:47.603" Score="0" ViewCount="504" Body="&lt;p&gt;After a new installation of Loki 0.4.1, the system boots fine but has some issues with freezing on booting and suspending. As per discussions, installing the proprietary nVidia drivers provided through the AppCenter fixes this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, once installed, the PRIME profile is by default on &lt;code&gt;nvidia&lt;/code&gt;. Changing this to &lt;code&gt;intel&lt;/code&gt; via &lt;code&gt;sudo prime-select intel&lt;/code&gt; on the command line, or through the &lt;code&gt;nvidia-settings&lt;/code&gt; gui, and then rebooting, causes the system to freeze.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This freeze occurs after the elementaryos logo on boot. Removing &lt;code&gt;quiet slash&lt;/code&gt; from grub to see what's going on reveals a single &lt;code&gt;failed&lt;/code&gt; status item:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[FAILED] Failed to start the NVIDIA Persistence Daemon.&#xA;See 'systemctl status nvidia-persistenced.service' for details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This particular issue is fixed following suggestions &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/nvidia-persistenced/+bug/1693123&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once fixed, the boot sequence reveals no &lt;code&gt;failed&lt;/code&gt; items, but there remains no change in the freezing behavior. The system is unresponsive to any commands and requires a hard reset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Booting into recovery mode and switching back to &lt;code&gt;nvidia&lt;/code&gt; via &lt;code&gt;sudo prime-select nvidia&lt;/code&gt; at the command line allows the user to reboot back into gpu-mode, but at the cost of losing access to the intel power-saving mode (e.g. fans constantly running, etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is occurs on a Razer Blade v4 with GTX 970m and Intel i7–6700HQ.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solutions?&lt;/p&gt;&#xA;" OwnerUserId="12789" LastActivityDate="2017-12-22T17:35:24.780" Title="Intel PRIME profile causes freezing on boot" Tags="|release-loki|boot|nvidia|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13981" PostTypeId="2" ParentId="2870" CreationDate="2017-11-22T16:08:28.107" Score="0" Body="&lt;p&gt;As of 2017, Steam doesn't create .desktop files for games. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instead, create a file called &quot;Dota 2.desktop&quot; and use the following template:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;[Desktop Entry]&#xA;Name=Dota 2&#xA;GenericName=Steam game&#xA;Comment=Play this game&#xA;Exec=steam steam://rungameid/570&#xA;Icon=steam_icon_570&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Game;&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once this is saved, you can find it in the launcher. You can then keep it in the dock.&lt;/p&gt;&#xA;" OwnerUserId="12790" LastActivityDate="2017-11-22T16:08:28.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13982" PostTypeId="2" ParentId="13980" CreationDate="2017-11-22T16:27:34.803" Score="0" Body="&lt;p&gt;I've stumbled across a solution that seems to work. The problem seems to stem from the fact that if the discrete Nvidia GPU is switched off before starting Xorg, the system freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The GitHub repo &lt;a href=&quot;https://github.com/r0l1/razer_blade_14_2016_acpi_fix&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; provides a way to manually disable/enable the discrete card after starting the graphical session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed a different &lt;a href=&quot;https://docs.google.com/document/d/1jI2jlVi1V0H8SeNm5kspJ1qXVtibLOnxNOkDr8ExoSI/edit#heading=h.ji4tc8troxq&quot; rel=&quot;nofollow noreferrer&quot;&gt;set of instructions&lt;/a&gt; reiterated below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install git cpio iasl&#xA;$ git clone https://github.com/m4ng0squ4sh/razer_blade_14_2016_acpi_fix&#xA;$ cd razer_blade_14_2016_acpi_fix&#xA;$ sudo make all &amp;amp;&amp;amp; sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, modify a boot-time config file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo vim  /etc/grub.d/10_linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There is a block of code around line 200 that reads something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;EOF&#xA;    fi&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;        initrd  ${intel_ucode} ${rel_dirname}/${initrd}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;EOF&#xA;    fi&#xA;    sed &quot;s/^/$submenu_indentation/&quot; &amp;lt;&amp;lt; EOF&#xA;        initrd  ${rel_dirname}/${initrd}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit the line last line to read&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;initrd  ${rel_dirname}/razer_acpi_fix.img ${rel_dirname}/${initrd}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;initrd  ${rel_dirname}/razer_acpi_fix.img ${intel_ucode} ${rel_dirname}/${initrd}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;depending on the original construction.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Saving the file, ensuring I'm on the intel profile with &lt;code&gt;sudo prime-select intel&lt;/code&gt;, updating the grub with &lt;code&gt;sudo update-grub&lt;/code&gt;, and finally rebooting seems to avoid the system locking up.&lt;/p&gt;&#xA;" OwnerUserId="12789" LastActivityDate="2017-11-22T16:27:34.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13983" PostTypeId="1" CreationDate="2017-11-23T02:20:05.540" Score="0" ViewCount="378" Body="&lt;p&gt;This is exactly the same issue as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13499/elementary-os-system-fonts-haywire&quot;&gt;elementary OS system fonts haywire&lt;/a&gt; but it is unsolved there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my screenshot:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yyanZ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yyanZ.jpg&quot; alt=&quot;enter image descriptionhttps://elementaryos.stackexchange.com/questions/13499/elementary-os-system-fonts-haywire here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I am inclined to believe this is related to screenshot tool on elementary. I was taking some screenshots in an evince window. It glitched to this font for a split second every time I tried to do an area grab screenshot. Then, it occured permanently. I can read all the fonts inside the browser application window (not the address bar or tabs though), so I kept on working thinking I'll just do a reboot later, but it persists.&lt;/li&gt;&#xA;&lt;li&gt;The problem does not occur in Guest Session, or a new account as I just created.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12792" LastActivityDate="2018-02-21T10:56:43.567" Title="System fonts are unreadable, haywire" Tags="|fonts|" AnswerCount="1" CommentCount="1" ClosedDate="2018-02-21T10:57:13.483" ContentLicense="CC BY-SA 3.0" />
  <row Id="13984" PostTypeId="1" CreationDate="2017-11-23T10:36:11.707" Score="0" ViewCount="263" Body="&lt;p&gt;I want to set keyboard layout changing on Super (win) button. How can I do this?&#xA;In system params (I think it called so in English version) there is no Super button in the list of shortcuts.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/MH4xZ.png&quot; alt=&quot;screenshot&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="12795" LastEditorUserId="84" LastEditDate="2021-07-10T09:21:26.857" LastActivityDate="2024-03-27T04:04:55.670" Title="Change keyboard layout button" Tags="|keyboard-shortcuts|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="13985" PostTypeId="2" ParentId="13984" CreationDate="2017-11-23T10:56:14.430" Score="0" Body="&lt;p&gt;not sure what you're asking, but by default super can change the page layout.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;Super + left/right arrow&lt;/code&gt; switch workspace&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;super + down arrow&lt;/code&gt; view windows in current workspace and shows workspace interface.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;super + up arrow&lt;/code&gt; Toggle full-screen&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;ctrl + super + left/right arrow&lt;/code&gt; window to left or right half of screen&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;shift + super + left/right arrow&lt;/code&gt; move window to different monitor (if you have more than one)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;super + a&lt;/code&gt; show all windows&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hopefully this answers your question, but if not what behavior are you actually trying to customize?&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-11-23T10:56:14.430" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13987" PostTypeId="2" ParentId="13819" CreationDate="2017-11-24T09:17:09.280" Score="1" Body="&lt;p&gt;I don't know why or when, but it sorted itself - probably one of the &lt;code&gt;daily&lt;/code&gt; patches. Thanks, eOS team!&lt;/p&gt;&#xA;" OwnerUserId="11979" LastActivityDate="2017-11-24T09:17:09.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13988" PostTypeId="1" AcceptedAnswerId="13999" CreationDate="2017-11-24T09:19:45.740" Score="2" ViewCount="5778" Body="&lt;p&gt;After latest updates done trough AppCenter I have following error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;After this operation, 0 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;Setting up update-notifier-common (3.168.5) ...&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/update-notifier/package-data-downloader&quot;, line 24, in &amp;lt;module&amp;gt;&#xA;    import debian.deb822&#xA;  File &quot;/usr/lib/python3/dist-packages/debian/deb822.py&quot;, line 47, in &amp;lt;module&amp;gt;&#xA;    import six&#xA;ImportError: No module named 'six'&#xA;dpkg: error processing package update-notifier-common (--configure):&#xA; subprocess installed post-installation script returned error exit status 1&#xA;Errors were encountered while processing:&#xA; update-notifier-common&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have found this: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/update-notifier/+bug/1680364&quot; rel=&quot;nofollow noreferrer&quot;&gt;package update-notifier-common 3.168.4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1&lt;/a&gt; but I had 'six' installed before. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to removing 'six' and installing it again trough 'pip'. It doesn't helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Python versions: 2.7.12, 3.5.2, 3.6.3 (also folder named python3 in /usr/local/lib).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS version: Loki 0.4.1&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -H pip install six&#xA;Requirement already satisfied: six in /usr/local/lib/python3.6/dist-packages&#xA;&#xA;sudo -H pip2 install six&#xA;Requirement already satisfied: six in /usr/local/lib/python2.7/dist-packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't know how to check it for 3.5.2 and this python3 folder.&lt;/p&gt;&#xA;" OwnerUserId="7102" LastActivityDate="2021-01-20T15:39:50.427" Title="Problem with package update-notifier-common after latest updates" Tags="|updates|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13991" PostTypeId="2" ParentId="6828" CreationDate="2017-11-24T22:28:58.530" Score="0" Body="&lt;p&gt;I don't use any ppa. I manually downloaded the &quot;elementary tweaks&quot; packages from &lt;a href=&quot;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&lt;/a&gt; and I installed them with Eddy  &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.eddy.desktop&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12806" LastActivityDate="2017-11-24T22:28:58.530" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="13995" PostTypeId="1" CreationDate="2017-11-25T12:38:03.870" Score="0" ViewCount="107" Body="&lt;p&gt;one thing bothers me a bit. I'd like to have the option to fix the column width in pantheon files-column view. They're all messed up when there's one file with a really long file name (e.g. Music files).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a solution for this out there and is somebody having the same issue as me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cheers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/43QUT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/43QUT.jpg&quot; alt=&quot;column_width&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12776" LastActivityDate="2024-03-27T00:02:30.287" Title="fixed Column width in files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13997" PostTypeId="2" ParentId="9206" CreationDate="2017-11-25T18:23:29.590" Score="-1" Body="&lt;p&gt;First install wmctrl: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then go to Keyboard -&gt; Shortcuts and click on the last option &quot;Custom&quot;. Add a new command by clicking on the &quot;+&quot; on the bottom of the window. &#xA;Insert the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;First, it will be displayed as &quot;Disable&quot;, all you have to do is set the shortcut you want you. In my case, I've set &quot;super+d&quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4jIPw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4jIPw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12813" LastActivityDate="2017-11-25T18:23:29.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13998" PostTypeId="2" ParentId="13972" CreationDate="2017-11-25T20:13:35.877" Score="0" Body="&lt;p&gt;Use &lt;code&gt;ll&lt;/code&gt; or &lt;code&gt;ls -al&lt;/code&gt; shell commands, you will see this directories have more permissions than normal one. Compare the permissions with the ones of home directories.&lt;/p&gt;&#xA;" OwnerUserId="12201" LastEditorUserId="12803" LastEditDate="2017-11-27T19:55:09.463" LastActivityDate="2017-11-27T19:55:09.463" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="13999" PostTypeId="2" ParentId="13988" CreationDate="2017-11-25T21:10:42.780" Score="0" Body="&lt;p&gt;The problem was Python 3.5.2. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found a different way to install packages with 'pip': &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python3.5 -m pip install foo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I was able to firstly install there 'pip' itself (don't know why I have 'pip' in 2.7 and 3.6 but not in 3.5, my mistake):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python3.5 get-pip.py&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and after that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;python3.5 -m pip install six&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7102" LastActivityDate="2017-11-25T21:10:42.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14001" PostTypeId="1" CreationDate="2017-11-26T09:39:16.337" Score="0" ViewCount="1751" Body="&lt;p&gt;When I update to &quot;sudo apt-get update&quot; appears this errors into terminal. How can I solved it? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(...)&#xA;Err:6 https://dl.bintray.com/aluxian/deb &amp;lt;channel&amp;gt;/main amd64 Packages&#xA;  404  Not Found&#xA;(...)&#xA;W: The repository 'https://dl.bintray.com/aluxian/deb &amp;lt;channel&amp;gt; Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: No s'ha pogut obtenir https://dl.bintray.com/aluxian/deb/dists/&amp;lt;channel&amp;gt;/main/binary-amd64/Packages  404  Not Found&#xA;E: Alguns índex no s'han pogut baixar. S'han descartat, o en el seu lloc s'han emprat els antics.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12815" LastEditorUserId="16827" LastEditDate="2019-04-12T17:27:48.503" LastActivityDate="2019-04-12T17:27:48.503" Title="Update error &quot;apt-get update&quot;" Tags="|updates|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14002" PostTypeId="1" CreationDate="2017-11-26T12:58:23.400" Score="2" ViewCount="326" Body="&lt;p&gt;My Thinkpad T460 has both an internal and external battery. Wingpanel is showing the internal battery on the top dock as 100% , but actually I want the other one showing, as the system shuts down anyway once the main battery hits 0%. So my at a glace battery status is useless unless I click down to see the second battery &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MoqLq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MoqLq.png&quot; alt=&quot;My battery&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can edit a file to change which battery is displayed?&lt;/p&gt;&#xA;" OwnerUserId="12818" LastActivityDate="2019-04-26T12:02:40.490" Title="Can I change the battery displayed by wingpanel-indicator-power?" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-26T17:48:34.990" ContentLicense="CC BY-SA 3.0" />
  <row Id="14004" PostTypeId="1" CreationDate="2017-11-26T15:26:28.913" Score="0" ViewCount="76" Body="&lt;p&gt;I would like to report a bug that is present on the Loki Document Viewer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the best place to report and make suggestions about this packages? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the Elementary's github, but i couldn't find the Document Viewer section. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2018-09-23T07:01:15.133" Title="Where is the place to report bugs and make suggestions about Elementary Document Viewer (Evince)" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14005" PostTypeId="2" ParentId="14004" CreationDate="2017-11-26T17:27:39.040" Score="1" Body="&lt;p&gt;I hope this page helps: &lt;a href=&quot;https://wiki.gnome.org/Apps/Evince/ReportingBugs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Apps/Evince/ReportingBugs&lt;/a&gt;&#xA;Seems like it's a Gnome project. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-26T17:27:39.040" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14006" PostTypeId="1" CreationDate="2017-11-26T18:37:47.187" Score="-1" ViewCount="101" Body="&lt;p&gt;Just installed elementary os, I don't know how to connect to WiFi?&#xA;I read some forums and sites but I didn't found anything interesting and useful&lt;/p&gt;&#xA;" OwnerUserId="12823" LastActivityDate="2017-11-26T20:30:38.970" Title="I don't know how to connect to WiFi" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14007" PostTypeId="2" ParentId="13995" CreationDate="2017-11-26T18:41:38.727" Score="0" Body="&lt;p&gt;I suggest you raise an issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;.  It would not be too hard to implement - except that it would involve another setting which may not meet the approval of the UX team.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment, the extent to which the columns can expand is limited to 3 times the &quot;preferred_column_width&quot; - the latter defaults to 180 pixels.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you set the preferred column width to a smaller number - say 60 (you need to edit the setting &quot;io.elementary.files.column-view.preferred-column-width&quot; using dconf-editor or the commandline 'gsettings set io.elementary.files.column-view preferred-column-width nnn') - then most columns will be at or near their maximum width and a pseudo fixed width effect can be obtained.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-11-26T18:41:38.727" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14009" PostTypeId="2" ParentId="14006" CreationDate="2017-11-26T20:30:38.970" Score="1" Body="&lt;p&gt;Click on the Wifi icon at the top right. Select your network and enter the password. Unless you are not seeing the triangle shaped Wifi icon? This may indicate that elementary is not detecting your wifi card.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-26T20:30:38.970" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14012" PostTypeId="2" ParentId="14001" CreationDate="2017-11-27T06:14:19.300" Score="0" Body="&lt;p&gt;Try removing all the repository source with 404 error code,&#xA;In case you would like to automate the same,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go &lt;a href=&quot;https://askubuntu.com/a/432364&quot;&gt;Here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once the ppa's that are not found are removed apt-get update will work just fine.&lt;/p&gt;&#xA;" OwnerUserId="11922" LastActivityDate="2017-11-27T06:14:19.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14013" PostTypeId="1" AcceptedAnswerId="14016" CreationDate="2017-11-27T09:39:10.307" Score="0" ViewCount="26" Body="&lt;p&gt;In system network proxy setting, the exception list do not have a scroll bar, and the setting window's min height depends on this list.&#xA;    How can I report this bug to developers? I don't know which project on github I should create a issues to?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help!&lt;/p&gt;&#xA;" OwnerUserId="9992" LastActivityDate="2017-11-27T15:06:45.533" Title="question about how to feedback a bug,and I have a question about setting window" Tags="|settings|display|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14015" PostTypeId="1" CreationDate="2017-11-27T14:27:57.690" Score="0" ViewCount="664" Body="&lt;p&gt;I have an old MacBook Core Duo, and I would like to run elementary OS exclusively on it.  Where do I get an 32 bit version (for Mac) of elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="12829" LastEditorUserId="308" LastEditDate="2018-08-07T16:42:26.370" LastActivityDate="2018-08-07T16:42:26.370" Title="Will elementary OS run on a 32bit MacBook?" Tags="|macbook|" AnswerCount="1" CommentCount="0" ClosedDate="2017-12-02T23:42:22.263" ContentLicense="CC BY-SA 4.0" />
  <row Id="14016" PostTypeId="2" ParentId="14013" CreationDate="2017-11-27T15:06:45.533" Score="0" Body="&lt;p&gt;This is indeed quite difficult, but it also makes somewhat sense since there are so many components that make an OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All parts specifically made for Elementary should be hosted under their Github organization: &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt;.&#xA;&quot;Pages&quot; of system settings (the &lt;a href=&quot;https://github.com/elementary/switchboard&quot; rel=&quot;nofollow noreferrer&quot;&gt;switchboard&lt;/a&gt; project) are called &quot;plugs&quot;, the networking plug for example is: &#xA;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-networking&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-networking&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-27T15:06:45.533" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14017" PostTypeId="2" ParentId="14015" CreationDate="2017-11-27T17:32:27.180" Score="0" Body="&lt;p&gt;Elementary OS Loki doesn’t have 32bit release - there’s only 64bit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, Elementary OS Freya had 32bit version. If You really want to install elementary, You can try Freya, but it’s an old version.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-11-27T17:32:27.180" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14018" PostTypeId="2" ParentId="12155" CreationDate="2017-11-27T18:27:19.010" Score="1" Body="&lt;p&gt;This is a known bug in dbus. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt; or &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2017-11-27T18:27:19.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14019" PostTypeId="2" ParentId="11576" CreationDate="2017-11-27T18:29:42.833" Score="0" Body="&lt;p&gt;This is a known bug in dbus. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt; or &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2017-11-27T18:29:42.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14020" PostTypeId="2" ParentId="13881" CreationDate="2017-11-27T18:33:18.610" Score="1" Body="&lt;p&gt;This is a known bug in dbus. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt; or &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2017-11-27T18:33:18.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14021" PostTypeId="2" ParentId="1638" CreationDate="2017-11-27T19:11:00.763" Score="0" Body="&lt;p&gt;I am using Elementary OS Loki. I used &quot;Tweak Tool&quot;, version 3.18.1 from AppCenter, to tweak some settings. The tool overwrites gnome xsettings overrides file without including prevous overrides. May or may not be a bug in that tool. When I use official tweak tool from 'System Settings-&gt;Personal-&gt;Tweaks-&gt;Appearance-&gt;General-&gt;Theme Settings' to toggle some setting, say 'Show Gnome Menu&quot;, the xsettings overrides get fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before the fix I had xsettings overrides set to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings get org.gnome.settings-daemon.plugins.xsettings overrides&#xA;{'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the fix: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings get org.gnome.settings-daemon.plugins.xsettings overrides&#xA;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12828" LastActivityDate="2017-11-27T19:11:00.763" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14022" PostTypeId="1" AcceptedAnswerId="14023" CreationDate="2017-11-28T04:55:42.293" Score="1" ViewCount="4075" Body="&lt;p&gt;To install the Brave browser I followed the instructions from &#xA;&lt;a href=&quot;https://github.com/brave/browser-laptop/blob/master/docs/linuxInstall.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/brave/browser-laptop/blob/master/docs/linuxInstall.md&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://s3-us-west-2.amazonaws.com/brave-apt/keys.asc | sudo apt-key add -&#xA;echo &quot;deb [arch=amd64] https://s3-us-west-2.amazonaws.com/brave-apt `lsb_release -sc` main&quot; | sudo tee -a /etc/apt/sources.list.d/brave-`lsb_release -sc`.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but when I run sudo apt update i get the errors&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://br.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://br.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                                                                       &#xA;Hit:3 http://br.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                                                                     &#xA;Hit:4 http://packages.elementary.io/appcenter xenial InRelease                                                                                                  &#xA;Get:5 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]                                                                                      &#xA;Hit:6 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease       &#xA;Hit:7 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease                               &#xA;Ign:8 https://s3-us-west-2.amazonaws.com/brave-apt loki InRelease&#xA;Err:9 https://s3-us-west-2.amazonaws.com/brave-apt loki Release&#xA;  403  Forbidden&#xA;Reading package lists... Done&#xA;E: The repository 'https://s3-us-west-2.amazonaws.com/brave-apt loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user9170" LastActivityDate="2017-11-28T09:57:48.460" Title="The repository does not have a Release File" Tags="|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14023" PostTypeId="2" ParentId="14022" CreationDate="2017-11-28T09:57:48.460" Score="1" Body="&lt;p&gt;I think the problem is the 'loki' part of '&lt;a href=&quot;https://s3-us-west-2.amazonaws.com/brave-apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://s3-us-west-2.amazonaws.com/brave-apt&lt;/a&gt; loki Release'. Loki is the name of the latest Elementary OS release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens because &lt;code&gt;lsb_release -sc&lt;/code&gt; in the commands they instruct you to use returns the text &quot;loki&quot;. &#xA;You can try this by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo `lsb_release -sc`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The install instructions are for Ubuntu and they assume it's replaced by a Ubuntu release like &lt;code&gt;xenial&lt;/code&gt;. Since you are running ElementaryOS Loki, which is based on Ubuntu 16.04 (Xenial) (See: &lt;a href=&quot;https://en.wikipedia.org/wiki/Ubuntu_(operating_system)&quot; rel=&quot;nofollow noreferrer&quot;&gt;wiki&lt;/a&gt;) I would manually replace the &lt;code&gt;lsb_release -sc&lt;/code&gt; parts with &lt;code&gt;xenial&lt;/code&gt;. A bit like they advice for Linux Mint. So: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://s3-us-west-2.amazonaws.com/brave-apt/keys.asc | sudo apt-key add -&#xA;echo &quot;deb [arch=amd64] https://s3-us-west-2.amazonaws.com/brave-apt xenial main&quot; | sudo tee -a /etc/apt/sources.list.d/brave-xenial.list&#xA;sudo apt update&#xA;sudo apt install brave-beta&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(I hope these things will get easier in the near future by newer packaging solutions like Snaps and/or Flatpak.)&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-28T09:57:48.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14025" PostTypeId="1" CreationDate="2017-11-28T13:01:06.313" Score="2" ViewCount="424" Body="&lt;p&gt;ibus is not working in elementary OS Loki though installed and setup as required. Even if the the input changed from English to Avro (a Bengali ibus input) except few applications(Eg. Plume Creator), most of the application is not supporting writing with Avro, instead it is continuing writing in English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ibus Avro setup instruction&#xA;&lt;a href=&quot;https://github.com/sarim/ibus-avro/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/sarim/ibus-avro/blob/master/README.md&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12844" LastEditorUserId="308" LastEditDate="2018-08-07T16:49:33.213" LastActivityDate="2019-12-02T05:08:59.880" Title="ibus (Avro) is not working in elementary OS Loki" Tags="|ibus|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14027" PostTypeId="1" CreationDate="2017-11-28T15:58:34.193" Score="0" ViewCount="238" Body="&lt;p&gt;I have installed OpenCPN which is navigation software that needs a GPS connection. I used the installation for Ubuntu 17 and the program works however when I try to connect my USB GPS dongle the program requires access to a serial port (because NMEA0183 data sent by the dongle is in serial format) An attempt to make a serial connection brings up a message saying I do not have access to serial ports on this system and tells me to exit and run the following in Terminal &quot; sudo usermod-a-G dialout (followed by my username)&quot;.  This is not a valid command.&#xA;How do I get permanent access to serial ports?&lt;/p&gt;&#xA;" OwnerUserId="12846" LastActivityDate="2018-10-25T10:00:38.667" Title="Cannot access serial port" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14029" PostTypeId="2" ParentId="14001" CreationDate="2017-11-28T17:05:12.077" Score="1" Body="&lt;p&gt;after googling your repository i deduced that you want to install facebook messenger desktop :) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;so follow these instructions as said on github &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver pool.sks-keyservers.net --recv 6DDA23616E3FE905FFDA152AE61DA9241537994D&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2nd step, he said replace  with &lt;strong&gt;stable&lt;/strong&gt;, &lt;strong&gt;beta&lt;/strong&gt; or &lt;strong&gt;dev&lt;/strong&gt; so result can be (the recommended one is stable but you can also try the dev or beta one and you can uninstall it if it has a problem : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://dl.bintray.com/aluxian/deb/ stable main&quot; |&#xA;  sudo tee -a /etc/apt/sources.list.d/aluxian.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://dl.bintray.com/aluxian/deb/ beta main&quot; |&#xA;  sudo tee -a /etc/apt/sources.list.d/aluxian.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://dl.bintray.com/aluxian/deb/ dev main&quot; |&#xA;  sudo tee -a /etc/apt/sources.list.d/aluxian.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install messengerfordesktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2017-11-28T17:05:12.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14031" PostTypeId="2" ParentId="14002" CreationDate="2017-11-28T18:38:13.753" Score="0" Body="&lt;p&gt;The repository for that indicator: &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-power&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-power&lt;/a&gt;&#xA;There already seems to be an open issue on this: &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-power/issues/13&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-power/issues/13&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-11-28T18:38:13.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14032" PostTypeId="2" ParentId="14027" CreationDate="2017-11-28T19:16:19.200" Score="1" Body="&lt;pre&gt;&lt;code&gt;$ sudo adduser &amp;lt;your_user_name&amp;gt; dialout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will need to log out and back in again for this to take effect.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-11-28T19:16:19.200" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14033" PostTypeId="1" AcceptedAnswerId="14139" CreationDate="2017-11-28T19:21:30.243" Score="0" ViewCount="380" Body="&lt;p&gt;I'm planning on building a new Coffee Lake/8th gen based PC (i7-8700k), which is only supported in kernel version 4.13+. I'm fairly new to Elementary, but am loving it so far and I'd like to make it my daily driver. On my current build, it looks like the current kernel is 4.10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Worst case I assume I could pull down a backport kernel from the ubuntu PPAs if I can even get the installer to load. Any other recommendations for how to approach this? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="12849" LastActivityDate="2017-12-13T02:44:18.953" Title="Recommended Install Path for Intel Coffee Lake CPU?" Tags="|system-installation|cpu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14034" PostTypeId="2" ParentId="14033" CreationDate="2017-11-28T19:25:06.653" Score="1" Body="&lt;p&gt;You could install Ukuu which makes it easy to install kernels, including 4.13, and roll back if the kernel causes issues. Check the link below on how to use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.omgubuntu.co.uk/2017/02/ukuu-easy-way-to-install-mainline-kernel-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.omgubuntu.co.uk/2017/02/ukuu-easy-way-to-install-mainline-kernel-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-11-28T19:25:06.653" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14038" PostTypeId="1" CreationDate="2017-11-30T06:23:52.977" Score="0" ViewCount="3174" Body="&lt;p&gt;Hey does anyone know how to permanently make opera work by doing some setting or something without launching in the terminal?.  I want to go back from vivaldi for a while.  Here is a link for an elementary OS only hack to make the main menu work.  (thanks to google.. I have no idea how they do this).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forums.opera.com/topic/23229/o-menu-missing-for-elementaryos-loki&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.opera.com/topic/23229/o-menu-missing-for-elementaryos-loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Key point is this:  Hi guys, @robbooker, @minuteman, you can try to run the Opera with the switch as follows/usr/bin/opera --show-opera-menu.&#xA;If it doesn't work, you can also try XDG_CURRENT_DESKTOP=GNOME /usr/bin/opera.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="308" LastEditDate="2018-08-07T16:58:04.683" LastActivityDate="2019-01-06T07:00:34.567" Title="elementary OS and Opera Browser" Tags="|opera|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14044" PostTypeId="1" AcceptedAnswerId="14045" CreationDate="2017-12-01T03:17:04.410" Score="0" ViewCount="54" Body="&lt;p&gt;I'm new in Linux and I've installed Elementary os Loki. I've tried to install Dropbox, and later of that, a strange black box with a type forbidden symbol appeared (see image).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched about that, but unfortunately I've not found anything, and I don't know what it means.  When I click on it, an empty tab is displayed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll appreciate your help and thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bMLNP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bMLNP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12897" LastActivityDate="2017-12-01T07:37:19.273" Title="How can I fix the error-black box in elementary os?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14045" PostTypeId="2" ParentId="14044" CreationDate="2017-12-01T07:37:19.273" Score="0" Body="&lt;p&gt;This is easily fixed with a change to the autostart desktop file.&#xA;Edit &lt;code&gt;.config/autostart/dropbox.desktop&lt;/code&gt; and change the Exec line to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE=&quot;&quot; dropbox start -i&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Log out and then back in and you should have a working icon in the systray.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only problem is that dropbox likes to overwrite this file back to the original, so you may want to make it read-only and/or change the owner to prevent that.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-12-01T07:37:19.273" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14046" PostTypeId="2" ParentId="4409" CreationDate="2017-12-01T09:35:48.287" Score="2" Body="&lt;p&gt;Check if you have broken soft links in &lt;code&gt;/usr/bin&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/bin&#xA;for x in * .[!.]* ..?*; do if [ -L &quot;$x&quot; ] &amp;amp;&amp;amp; ! [ -e &quot;$x&quot; ]; then echo &quot;$x&quot;; fi; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will list all broken soft links. If you have any, specially the &lt;code&gt;which&lt;/code&gt; command, there's your answer. Just remove the broken link and relink again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/bin&#xA;sudo rm which&#xA;sudo ln -s /bin/which which&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;In my case, I had installed some Node.js packages globally (entries added to &lt;code&gt;/usr/bin&lt;/code&gt;), and one of them was replacing the default &lt;code&gt;which&lt;/code&gt; command with a Node.js custom one. &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Then, at some point I switched the Node.js &lt;code&gt;--global&lt;/code&gt; installations from &lt;code&gt;/usr/local/...&lt;/code&gt; to my &lt;code&gt;$HOME&lt;/code&gt; (to &lt;a href=&quot;https://github.com/sindresorhus/guides/blob/master/npm-global-without-sudo.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;solve a problem&lt;/a&gt; with &lt;code&gt;node-gyp&lt;/code&gt;), after which I ended up with &lt;strong&gt;plenty of broken links on &lt;code&gt;/usr/bin&lt;/code&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you want you can remove all broken links (at your own risk) using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su -&#xA;cd /usr/bin&#xA;for x in * .[!.]* ..?*; do if [ -L &quot;$x&quot; ] &amp;amp;&amp;amp; ! [ -e &quot;$x&quot; ]; then rm &quot;$x&quot;; fi; done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12901" LastEditorUserId="2926" LastEditDate="2017-12-03T20:14:45.013" LastActivityDate="2017-12-03T20:14:45.013" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14048" PostTypeId="1" CreationDate="2017-12-01T17:02:54.937" Score="0" ViewCount="41" Body="&lt;p&gt;I get to the login screen, put in my password, press enter then a black screen with a flashing  line appears for 3 seconds then it goes back to the login screen&lt;/p&gt;&#xA;" OwnerUserId="12914" LastActivityDate="2017-12-04T02:01:59.757" Title="Boot screen error (?)" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14049" PostTypeId="2" ParentId="13369" CreationDate="2017-12-01T17:23:34.180" Score="0" Body="&lt;p&gt;Run &lt;code&gt;synclient -l | grep TapButton3&lt;/code&gt; in terminal. You will see that &lt;code&gt;TapButton3              = 2&lt;/code&gt;. We want to disable this. Run &lt;code&gt;synclient TapButton3=0&lt;/code&gt; and it should work. It is only temporary for that session though.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;A permanent solution is a bit messy. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;We need to make sure that gnome settings daemon is not messing with our settings. To do that go to org&gt;gnome&gt;settings-daemon&gt;plugins&gt;mouse and dismiss the active option. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Make a directory &lt;code&gt;/etc/X11/xorg.conf.d&lt;/code&gt; (if it is already not there). &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy &lt;code&gt;/usr/share/X11/xorg.conf.d/70-synaptics.conf&lt;/code&gt; to  &lt;code&gt;/etc/X11/xorg.conf.d/&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add &lt;code&gt;Option &quot;TapButton3&quot; &quot;0&quot;&lt;/code&gt; to &lt;code&gt;/etc/X11/xorg.conf.d/70-synaptics.conf&lt;/code&gt; in &lt;code&gt;Section &quot;InputClass&quot;&lt;/code&gt; and &lt;code&gt;Identifier &quot;touchpad catchall&quot;&lt;/code&gt;. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To enable natural scroll, you will have to add &lt;code&gt;Option &quot;VertScrollDelta&quot; &quot;-77&quot;&lt;/code&gt; and &lt;code&gt;Option &quot;HorizScrollDelta&quot; &quot;-77&quot;&lt;/code&gt; as well. -77 is just a negative integer with appropriate scroll speed which may differ for you.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="11731" LastEditorUserId="11731" LastEditDate="2017-12-04T02:29:04.197" LastActivityDate="2017-12-04T02:29:04.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14050" PostTypeId="1" CreationDate="2017-12-01T18:29:21.657" Score="1" ViewCount="142" Body="&lt;p&gt;I change my pc's videocard after some days it's start freezing/ and i restarting every time. I'm downloading nvidia drivers from app center/ have a 2 download I'm downloading both but when I restart my pc one of both non installing and when I open the second program it's freezing&lt;/p&gt;&#xA;" OwnerUserId="12915" LastActivityDate="2017-12-01T18:29:21.657" Title="elementary os is freezing" Tags="|appcenter|drivers|nvidia|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14052" PostTypeId="1" CreationDate="2017-12-01T21:38:10.887" Score="-1" ViewCount="83" Body="&lt;p&gt;I'm trying to install Loki. I've downloaded the &lt;code&gt;.iso&lt;/code&gt; file, but it does not show up in Rufus or Unetbootin when browsing for an .iso.  Am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="12918" LastEditorUserId="2926" LastEditDate="2017-12-03T20:14:19.020" LastActivityDate="2017-12-03T20:14:19.020" Title="Is the current iso broken" Tags="|release-loki|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="14053" PostTypeId="1" CreationDate="2017-12-02T02:06:14.620" Score="1" ViewCount="199" Body="&lt;p&gt;Just like what the title said.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dual booted elementary OS Loki and realized that the battery icon has gone missing...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried reinstalling everything, but it still does not show up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a Surface Pro so is that possibly the case of the hardware not being supported?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice/solution would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="12922" LastEditorUserId="308" LastEditDate="2018-08-07T18:16:23.170" LastActivityDate="2018-11-21T15:04:18.073" Title="Battery icon is missing from top wingpanel" Tags="|release-loki|wingpanel|battery|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14054" PostTypeId="1" AcceptedAnswerId="15633" CreationDate="2017-12-02T02:24:44.247" Score="1" ViewCount="3439" Body="&lt;p&gt;I've installed Elementary os Loki and when I resume it from suspend, the screen is completely black with this line: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;tc_cmos 00:01: alarms can be up to one month in the future&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've searched for this without any solutions. I see &lt;a href=&quot;https://askubuntu.com/questions/954315/black-screen-on-suspend&quot;&gt;here&lt;/a&gt; this same problem   and a related idea with the &quot;solution&quot;( &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2367382&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; ), &lt;strong&gt;but the problem hasn't been solved&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My machine is an Asus Dual-Core i5-7200U 2.5Hz. Nvidia Geforce 920 Mx and my OS is Elementary Os 0.4.1 Loki built on &quot;Ubuntu 16.04.3 LTS&quot;/Linux 4.10.0-40-generic GTK+3.18.9.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll appreciate your help and thank you.&lt;/p&gt;&#xA;" OwnerUserId="12897" LastActivityDate="2018-05-26T20:07:03.400" Title="How to fix the &quot;alarms can be up to one month in the future&quot; problem in elementary os loki?" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14055" PostTypeId="2" ParentId="13369" CreationDate="2017-12-02T03:10:25.210" Score="1" Body="&lt;p&gt;A relevant issue on a similar topic, the middle mouse button:&#xA;&lt;a href=&quot;https://github.com/elementary/default-settings/issues/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/default-settings/issues/5&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to start a discussion on whether this is expected behavior. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-02T03:10:25.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14056" PostTypeId="1" CreationDate="2017-12-02T11:08:01.823" Score="1" ViewCount="282" Body="&lt;p&gt;Hey buying a new laptop and looking at HP ENVY 13 as it is a very good laptop with reasonable pricing. The specs that I think will affect if elementary can run is as below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel 8th Gen i7-8550U&#xA;nVidia MX 150&#xA;CPU fan that will turn on only when it reaches a certain temperature.&#xA;USB type-C ports&#xA;microSD slot&#xA;Broadcomm WiFi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the above in mind, has anyone gotten elementary to run on a HP ENVY 13 or anything equivalent?&lt;/p&gt;&#xA;" OwnerUserId="9152" LastActivityDate="2024-03-18T15:04:20.443" Title="Can elementary OS run on HP ENVY 13 (2017 models)" Tags="|system-installation|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14057" PostTypeId="1" AcceptedAnswerId="14141" CreationDate="2017-12-02T18:25:37.193" Score="0" ViewCount="637" Body="&lt;p&gt;Is there a way of adding my iCalendar to the native Calendar app of elementary OS?&#xA;I imagine that I should find a CalDav link for that.&lt;/p&gt;&#xA;" OwnerUserId="2409" LastEditorUserId="84" LastEditDate="2018-05-06T17:37:34.870" LastActivityDate="2018-05-06T17:37:34.870" Title="iCalendar on elementaryOS" Tags="|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14058" PostTypeId="1" CreationDate="2017-12-02T19:09:48.967" Score="1" ViewCount="47" Body="&lt;p&gt;I am trying to access my music in iPod touch but I can access only photos and documents.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see to iPod using &quot;Pantheon&quot; and &quot;Clementine&quot; but I can not find any music using them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get to my music?&lt;/p&gt;&#xA;" OwnerUserId="12933" LastEditorUserId="16827" LastEditDate="2019-04-11T06:32:39.710" LastActivityDate="2019-04-11T06:32:39.710" Title="Access to iPod musics" Tags="|system|sharing|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14059" PostTypeId="2" ParentId="14052" CreationDate="2017-12-03T00:09:14.093" Score="1" Body="&lt;p&gt;You might be trying to find it in the dropdown list - unfortunately elementaryOS is not in that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zJH4H.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zJH4H.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to click the browse button - the &lt;kbd&gt;...&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fve9u.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fve9u.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to the file (probably in your downloads folder), and open it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8nnIB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8nnIB.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, could you edit your question to add a little more information?&lt;/p&gt;&#xA;" OwnerUserId="2926" LastActivityDate="2017-12-03T00:09:14.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14060" PostTypeId="2" ParentId="13963" CreationDate="2017-12-03T03:53:24.327" Score="0" Body="&lt;p&gt;I was able to find my own answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I needed to do was install it in CMakeLists.txt&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# install css&#xA;INSTALL(FILES src/style.css DESTINATION ${PKGDATADIR})&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then in the vala file I needed to call it where the destination would be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;try {&#xA;    css_provider.load_from_path(DESTINATION + &quot;/style.css&quot;);&#xA;  } catch (GLib.Error e) {&#xA;    stderr.printf(&quot;%s&quot;, e.message);&#xA;  }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;DESTINATION should be the location in the directory where you are saving the file. This can be done by assigning variables or hardcoding it.&lt;/p&gt;&#xA;" OwnerUserId="12171" LastActivityDate="2017-12-03T03:53:24.327" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14062" PostTypeId="1" AcceptedAnswerId="14063" CreationDate="2017-12-03T09:22:00.793" Score="1" ViewCount="347" Body="&lt;p&gt;Let me start by saying that I'm an absolute noob here. Barely 24 hours on a linux based system. So please don't mind if my framing of the question seems uninformed or noobish.&#xA;Here is the main issue- &#xA;I want to install drivers for my laptop and none of the divers say 'for elementary os' they say 'ubuntu';'bsd';'linux' and so on.&#xA;So, I wanted to know which one of these is elementary based on so that I can download and install it for my elementary -&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MaWnG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/MaWnG.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This answer will help me install other such softwares too. Thank you in advance :)&lt;/p&gt;&#xA;" OwnerUserId="12942" LastActivityDate="2017-12-22T13:14:21.297" Title="On what ubuntu/linux version is elementary based on" Tags="|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14063" PostTypeId="2" ParentId="14062" CreationDate="2017-12-03T10:09:43.313" Score="1" Body="&lt;p&gt;You can check&#xA;&lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS#Summary_table&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; link for the version you installed. You probably have installed Loki which is based on Ubuntu 16.04&#xA;Hope that helps!&lt;/p&gt;&#xA;" OwnerUserId="7625" LastActivityDate="2017-12-03T10:09:43.313" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14064" PostTypeId="2" ParentId="14062" CreationDate="2017-12-03T11:34:50.447" Score="1" Body="&lt;p&gt;You can also see this by going to System settings &gt; About. In the case of Loki it will mention something like:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Build on &quot;Ubuntu 16.04.3 LTS&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;P.S: You can download the drivers that are meant for Ubuntu. That should work.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-12-22T13:14:21.297" LastActivityDate="2017-12-22T13:14:21.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14066" PostTypeId="1" CreationDate="2017-12-03T18:38:12.563" Score="2" ViewCount="48" Body="&lt;p&gt;I've got a chromebook I want to install elementary os on to dual boot.  But my memory sticks all are the normal USB form factors, and the machine only has the tiny USB ports (USB-C).  And there's no DVD drive on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I can think of is to install over the network, but I can't seem to find any documentation about that.  Is it possible?&lt;/p&gt;&#xA;" OwnerUserId="12950" LastActivityDate="2017-12-09T07:27:16.130" Title="Is it possible to install the OS over the network?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14068" PostTypeId="1" AcceptedAnswerId="14071" CreationDate="2017-12-04T00:18:27.227" Score="0" ViewCount="107" Body="&lt;p&gt;The problem is that Geary does not start, in the Dock it show a notification, but no start and i need to reconfigurate this package to restart the application, any idea? The version of Geary is 0.10.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;El problema es que Geary no se inicia, en el Dock muestra una notificación, pero no inicia y necesito reconfigurar este paquete para reiniciar la aplicación, ¿alguna idea? La versión de Geary es la 0.10.0&lt;/p&gt;&#xA;" OwnerUserId="12656" LastActivityDate="2017-12-04T04:40:12.137" Title="How to reconfigure Geary in Freya?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14069" PostTypeId="2" ParentId="14048" CreationDate="2017-12-04T02:01:59.757" Score="-1" Body="&lt;p&gt;is an internal error, probably a erase of a file in the system, try to reinstall&lt;/p&gt;&#xA;" OwnerUserId="12656" LastActivityDate="2017-12-04T02:01:59.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14071" PostTypeId="2" ParentId="14068" CreationDate="2017-12-04T04:40:12.137" Score="0" Body="&lt;p&gt;Primero quizás deberías actualizar a Loki, Trusty tiene soporte pero no sé si el resto de componentes de Freya lo tenga aún.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Aparte de eso, puedes ejecutar Geary desde una terminal y revisar si aparece algún mensaje de error. También puedes probar abrirlo desde la sesión de invitados: si tampoco inicia, prueba reinstalándolo desde una terminal con &lt;code&gt;sudo apt-get install --reinstall geary&lt;/code&gt;; si arranca normal, prueba eliminar las carpetas donde guarda la configuración (&lt;code&gt;~/.config/geary&lt;/code&gt; y &lt;code&gt;~/.local/share/geary&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="6962" LastActivityDate="2017-12-04T04:40:12.137" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14074" PostTypeId="2" ParentId="8646" CreationDate="2017-12-04T12:59:38.867" Score="1" Body="&lt;p&gt;Firs ensure you have turned off secure-boot from bios setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try the bumblebee method. It's cleaner and easier to switch, no need to logout.&#xA;To try it out, first uninstall any driver installed, or start fresh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However elementary doesn't ship with the ppa tools by default, to install them run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll need the latest packages from the bumblebee repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:bumblebee/testing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then (optionally) add the nvidia drivers repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:graphics-drivers/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update the package indexes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install the latest Nvidia driver, replace the XXX with the latest available from the repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-XXX&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now select the intel gpu to be used as primary device&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo prime-select intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install the Bumblebee package with some extra utils&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install bumblebee primus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Open /etc/bumblebee/bumblebee.conf and edit some parameters:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Change the 'Driver=' line to be 'Driver=nvidia'&lt;/li&gt;&#xA;&lt;li&gt;Change the 'KernelDriver=nvidia' line to be 'KernelDriver=nvidia-XXX'&#xA;(XXX being the driver version you just installed)&lt;/li&gt;&#xA;&lt;li&gt;Further down you'll see some lib paths, containing 'nvidia-current'.&#xA;Replace 'nvidia-current' with 'nvidia-XXX' on all 3 locations and&#xA;save the file.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Open /etc/modprobe.d/bumblebee.conf and check if the driver you installed is blacklisted at the bottom of the file, don't worry, IT SHOULD BE eg.:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blacklist nvidia-XXX&#xA;blacklist nvidia-XXX-updates&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should be good to go. Reboot and try it out.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mesa-utils&#xA;primusrun glxinfo | grep OpenGL&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you see the specs of your Nvidia chip, you did it right.&#xA;You can also check if the discrete gpu is properly shut down after using it with primusrun by executing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cat /proc/acpi/bbswitch&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it returns OFF, you're done.&#xA;For more info on how to use bumblebee and the primus bridge, see &lt;a href=&quot;https://github.com/Bumblebee-Project/Bumblebee/wiki/Install-and-usage&quot; rel=&quot;nofollow noreferrer&quot;&gt;bumblebee usage&lt;/a&gt;&#xA;To run Steam games with the NV gpu you don't need to start steam with primusrun, but just &lt;a href=&quot;https://support.steampowered.com/kb_article.php?ref=6316-GJKC-7437&quot; rel=&quot;nofollow noreferrer&quot;&gt;add single option&lt;/a&gt; on each game's settings.&#xA;There you go, the games start on the nvidia gpu with no hassle and messing with commands.&lt;/p&gt;&#xA;" OwnerUserId="12029" LastEditorUserId="12029" LastEditDate="2017-12-04T13:05:01.047" LastActivityDate="2017-12-04T13:05:01.047" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14075" PostTypeId="1" AcceptedAnswerId="14101" CreationDate="2017-12-04T13:15:04.790" Score="0" ViewCount="255" Body="&lt;p&gt;I'd like to add a right click menu item to easily resize images in files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found that the following script does what I want when I run it in a Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;convert myimage.jpg -resize '1200x1200' -set filename:fname '%t-1200px.%e' +adjoin '%[filename:fname]'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when add a &lt;code&gt;resize-image.contract&lt;/code&gt; file to &lt;code&gt;~/.local/share/contractor&lt;/code&gt; with the following content, nothing seems to happen.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Resize to 1200px&#xA;MimeType=image;&#xA;Exec=convert %U -resize '1200x1200' -set filename:fname '%t-1200px.%e' +adjoin '%[filename:fname]'&#xA;Gettext-Domain=pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(This scripts requires &lt;code&gt;imagemagick&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to debug this? When I run &lt;code&gt;pantheon-files --debug&lt;/code&gt; I don't see relevant output. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Issue on Contracts documentation: &lt;a href=&quot;https://github.com/elementary/contractor/issues/16&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/contractor/issues/16&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; I've tried splitting up the script, like Jeremy Wootten suggested, see below, but that doesn't seem to help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;~/.local/share/contractor/resize-image-1200.contract: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Resize to 1200px&#xA;MimeType=image;&#xA;Exec=convert %U -resize '1200x1200' -set filename:fname '%t-1200px.%e' +adjoin '%[filename:fname]'&#xA;Exec=/usr/local/bin/resize-image-1200.sh %U&#xA;Gettext-Domain=pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;/usr/local/bin/resize-image-1200.sh:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;inputfile=${1?'please supply input file name'}&#xA;echo &quot;input: $inputfile&quot;&#xA;&#xA;convert $inputfile -resize '1200x1200' -set filename:fname '%t-1200px.%e' +adjoin '%[filename:fname]'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2:&lt;/strong&gt;&#xA;With the tips from Jeremy Wootten I have something that kind of works, except that it doesn't use convert's rename trick, so now it's limited to jpg files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/share/contractor/resize-image-1200.contract&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Resize to 1200px&#xA;MimeType=image;&#xA;Exec=resize-image-1200.sh %U&#xA;Gettext-Domain=pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/local/bin/resize-image-1200.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;convert &quot;$1&quot; -resize '1200x1200' &quot;$1-test.jpg&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've opened an issue on debugging .contract files: &lt;a href=&quot;https://github.com/elementary/contractor/issues/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/contractor/issues/20&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 3:&#xA;After &lt;a href=&quot;https://github.com/elementary/contractor/issues/20#issuecomment-350000385&quot; rel=&quot;nofollow noreferrer&quot;&gt;a tip on debugging&lt;/a&gt; I changed my &lt;code&gt;/usr/local/bin/resize-image-1200.sh&lt;/code&gt; script to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;exec 2&amp;gt; /tmp/resize-image-1200.sh.log&#xA;exec 1&amp;gt;&amp;amp;2&#xA;set -x&#xA;convert &quot;$1&quot; -resize '1200x1200' -set filename:fname '%t-1200px.%e' '%[filename:fname]'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This created &lt;code&gt;/tmp/resize-image-1200.sh.log&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;+ convert '/home/peteruithoven/NextCloud/InstantUpload/OpenScope/thunar test/IMG_20171116_003459.jpg' -resize 1200x1200 -set filename:fname %t-1200px.%e '%[filename:fname]'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which indicates that it ran the script successfully. Running this myself I found out it would put the resulting resized image file in the folder I was executing the script from, so I think that's the next challenge. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 4&lt;/strong&gt;: Instead of using Imagemagick to rename I'm now using bash functionality. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/local/bin/resize-image-1200.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;exec 2&amp;gt; /tmp/resize-image-1200.sh.log&#xA;exec 1&amp;gt;&amp;amp;2&#xA;set -x&#xA;&#xA;DIR=$(dirname &quot;$1&quot;)&#xA;BASENAME=$(basename &quot;$1&quot;)&#xA;FILENAME=${BASENAME%.*}&#xA;EXT=${BASENAME##*.}&#xA;&#xA;convert &quot;$1&quot; -resize '1200x1200' +adjoin &quot;$DIR/$FILENAME-1200px.$EXT&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;One downside is that this script wouldn't work with multiple files, but then again, even when selecting multiple files and running the contract the .sh script only gets the path to the first file. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-12-08T15:04:00.147" LastActivityDate="2017-12-08T15:42:14.243" Title="Image resize contract" Tags="|pantheon-files|files|contract|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14076" PostTypeId="2" ParentId="13967" CreationDate="2017-12-04T17:48:07.437" Score="0" Body="&lt;p&gt;Currently, there is &lt;a href=&quot;https://github.com/elementary/greeter/issues/72&quot; rel=&quot;nofollow noreferrer&quot;&gt;an open issue on Githb&lt;/a&gt; asking for this. Also I'm pretty sure I request this on launchpad when was still possible to report issues there.&lt;/p&gt;&#xA;" OwnerUserId="6962" LastActivityDate="2017-12-04T17:48:07.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14077" PostTypeId="2" ParentId="14075" CreationDate="2017-12-05T11:11:33.187" Score="0" Body="&lt;p&gt;Try writing an executable bash script to perform the operations you require and launch that from the contract, passing only the uri as a parameter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Contractor does not expect the commandline to be complex - I suspect the problem is there somewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, if your script is called e.g. &lt;code&gt;resize1200.sh&lt;/code&gt; then &lt;code&gt;Exec=resize1200.sh -U%&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some experimentation the following simple script works for single files:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;`#!/bin/bash io.elementary.terminal --execute=&quot;convert \&quot;$1\&quot; -resize '1200x1200' \&quot;$1-test.jpg\&quot;&quot;`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A more complex script based on this should work for multiple files and different output file naming (you need one --execute flag and each following command to run must be a single string - in quotes if it contains spaces -.  Inside the string, parameters with spaces must be further quoted with escaped quotes.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="3911" LastEditDate="2017-12-06T17:01:08.417" LastActivityDate="2017-12-06T17:01:08.417" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="14080" PostTypeId="1" CreationDate="2017-12-05T18:17:50.260" Score="1" ViewCount="236" Body="&lt;p&gt;I have a problem to install elementary OS. I do all of the proceedings and it shows me that I need to reset my laptop. I restart it but it still shows me that I need to install it again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have had this problem when Ubuntu but I found a solution in installing like a made factory, the problem is that in elementary OS it doesn't show me this operation.&lt;/p&gt;&#xA;" OwnerUserId="12977" LastEditorUserId="84" LastEditDate="2018-05-06T17:27:31.067" LastActivityDate="2018-08-05T11:32:13.457" Title="Problems at installing elementary OS in emmc" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14081" PostTypeId="2" ParentId="14080" CreationDate="2017-12-05T18:24:46.773" Score="1" Body="&lt;p&gt;That sounds like you're choosing the live image instead of installing it? What do you do after you've booted Elementary OS from something like a live usb / cd? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe the following articles help. &#xA;&lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation&lt;/a&gt;&#xA;&lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/guide-install-elementary-os-luna/&lt;/a&gt;&#xA;&lt;a href=&quot;http://www.ubuntubuzz.com/2016/09/how-to-install-elementary-os-04-loki.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.ubuntubuzz.com/2016/09/how-to-install-elementary-os-04-loki.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-05T18:24:46.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14082" PostTypeId="1" CreationDate="2017-12-05T21:49:36.643" Score="0" ViewCount="467" Body="&lt;p&gt;i tried to do a full installation on a 16 gb usb,&#xA;but something went wrong&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the os is stuck after the logo with the cursor (movable) on a black screen or (if I press enter twice) a picture of a tree branch and nothing else &lt;a href=&quot;https://i.stack.imgur.com/DJUHf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/DJUHf.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the exact same thing happens even in live usb 'try elementary'' mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe it's the graphic card, either with nomodeset on or recovery mode everything loads (in low resolution with the first) &#xA;in recovery mode I have installed intel microcode in drivers with no effect&lt;/p&gt;&#xA;" OwnerUserId="12951" LastEditorUserId="12951" LastEditDate="2017-12-05T21:54:43.753" LastActivityDate="2017-12-06T22:15:55.753" Title="Blank desktop Elementary OS" Tags="|system-installation|graphic-drivers|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14083" PostTypeId="1" CreationDate="2017-12-06T03:44:36.043" Score="0" ViewCount="1669" Body="&lt;p&gt;I'm currently on elementary OS Freya (Ubuntu 16.04 base). I'd like to run a script when the session is locked and when it is unlocked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have asked a similar question here for Ubuntu: &lt;a href=&quot;https://unix.stackexchange.com/questions/28181/run-script-on-screen-lock-unlock&quot;&gt;https://unix.stackexchange.com/questions/28181/run-script-on-screen-lock-unlock&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, none of these solutions appear to catch the lock/unlock of the session manager. I'm basically locking my session using &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt; and then logging back in with my password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm following the dbus main bus via &lt;code&gt;dbus-monitor&lt;/code&gt; and the session bus with &lt;code&gt;dbus-monitor --session&lt;/code&gt; and grepping for lock/unlock, but I can't seem to find what I'm looking for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can one of the elementary developers comment on what DBus event I should be listening for in order to see when the screen has been locked and unlocked?&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2023-12-10T11:06:45.967" Title="DBus Signal for Session Lock/Unlock?" Tags="|release-freya|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14084" PostTypeId="1" CreationDate="2017-12-06T04:50:53.843" Score="0" ViewCount="319" Body="&lt;p&gt;There's a low static sound in the earphones when nothing is playing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried messing with &lt;code&gt;alsamixer&lt;/code&gt; and it seems to be the headphone mic boost setting, but I can't use &lt;code&gt;alsactl store&lt;/code&gt; to save it or anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there another way to save the settings on startup so that this doesn't happen?&lt;/p&gt;&#xA;" OwnerUserId="12128" LastEditorUserId="14940" LastEditDate="2019-01-02T14:03:16.413" LastActivityDate="2019-06-01T15:03:20.437" Title="Static Sound in Earphones" Tags="|settings|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14085" PostTypeId="1" AcceptedAnswerId="14128" CreationDate="2017-12-06T07:43:35.053" Score="1" ViewCount="379" Body="&lt;p&gt;Bluetooth is reactivating each time without prompt (suspend or reboot), I have to switch it off manually each time too. I don't like it: that's a potential security breach and a loss of time. Why isn't there an option to switch it off by default as of boot/suspend in settings?&#xA;Machine is legacy MBP 17&quot; 2,1&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2017-12-11T16:44:19.860" Title="Bluetooth activating on wake-up from suspend &amp; reboot" Tags="|bluetooth|suspend|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14087" PostTypeId="2" ParentId="1540" CreationDate="2017-12-06T16:42:58.747" Score="1" Body="&lt;p&gt;The fact that Plank comes with the option to be shown at the top acts as a bug in the context of the elementary desktop, as it interferes with the panel (Wingpanel) no matter what. The question amounts to how to reduce the panel &lt;strong&gt;length&lt;/strong&gt; (left-right size) in order to leave some space for the dock at the top. They cannot be combined. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't think that reducing the panel length is possible, but I have posted a specific &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14086/can-panel-size-be-edited&quot;&gt;question&lt;/a&gt; on that in order to have a clear answer.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;On the other hand, for what it's worth, as this is a matter of gaining display space: the elementary desktop has its own way of taking advantage of display space through the use of shortcuts that may remove the need for what we ask here. Super-A and Super-S, along with Alt-Tab and Super-Tab allow access to windows and workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Adding a shortcut like Super-F to &quot;Toggle Fullscreen&quot; may also be a good idea. The fullscreen mode assigns to each window its own workspace, which can be cycled with Super-Tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7mSHd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7mSHd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That might also reduce the need for the dock to be always visible, hence more display space.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-12-06T16:54:55.293" LastActivityDate="2017-12-06T16:54:55.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14088" PostTypeId="2" ParentId="9404" CreationDate="2017-12-06T17:02:07.243" Score="0" Body="&lt;p&gt;The dock becomes visible when no window pressures it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Super-Tab&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dock is always shown on an empty workspace. So, the shortkey to cycle workspaces Super-Tab can be used. 'Restrict to workspace' should better not be enabled in this case. Cycling to an empty workspace with Super-Tab reveals the hidden dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Super-UpArrow&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Toggling Maximize on/off may show the hidden dock. &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2017-12-06T17:07:32.157" LastActivityDate="2017-12-06T17:07:32.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14091" PostTypeId="2" ParentId="14082" CreationDate="2017-12-06T22:15:55.753" Score="1" Body="&lt;p&gt;Does it load after a while (1/2 minutes)?&#xA;If yes, you're facing a bug in dbus like I did.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.desktop.backup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info: &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1596377&lt;/a&gt; or &lt;a href=&quot;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/commits-list/2016-July/msg02793.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2017-12-06T22:15:55.753" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14092" PostTypeId="2" ParentId="14084" CreationDate="2017-12-06T23:30:13.327" Score="1" Body="&lt;p&gt;After you change your alsa settings you just need&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo alsactl store&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To store them&lt;/p&gt;&#xA;" OwnerUserId="13005" LastActivityDate="2017-12-06T23:30:13.327" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14094" PostTypeId="1" AcceptedAnswerId="14103" CreationDate="2017-12-07T16:43:32.177" Score="0" ViewCount="2875" Body="&lt;p&gt;it turns out that my laptop had windows and I decided to put linux, specifically Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even though everything is fine, WiFi does not. The speed is much slower, I have 60mb and in windows I reached 60mb.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes I have 40-50mb, other times it does not reach 10mb and other times I do not even have wifi, while on my other computer I have the exact 60mb. We do not talk about days, this happens all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried everything, install Ubuntu, Deepin, follow internet guides that are useless, but I could not fix it. What can happen?&lt;/p&gt;&#xA;" OwnerUserId="13007" LastEditorUserId="13007" LastEditDate="2017-12-20T14:49:05.497" LastActivityDate="2017-12-20T17:15:26.330" Title="Wifi problem, help please [solved]" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14095" PostTypeId="1" CreationDate="2017-12-07T17:07:16.957" Score="0" ViewCount="591" Body="&lt;p&gt;Today, the HDMI port does not seem to be transmitting to the external HDMI monitor I've used for more than a year.  Using fully updated Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked cable connections.  Monitor has power but indicates there is no HDMI signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've power cycled the laptop and monitor multiple times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried plugging the HDMI cable in before the laptop is powered on.  I've tried waiting to plug it in until I've logged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings -&gt; Displays is unaware I have an HDMI monitor plugged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't had any external monitor issues in months.  Is there a way to force the OS to detect the monitor?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've looked at various posts flagged as being similar to this one, but they are all either more than a year old or have no resolution, or in any case none of the suggestions have made any difference.&lt;/p&gt;&#xA;" OwnerUserId="6868" LastActivityDate="2020-08-07T04:15:12.120" Title="Second HDMI Monitor Not Displaying" Tags="|release-loki|display|hdmi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14096" PostTypeId="2" ParentId="14095" CreationDate="2017-12-07T17:17:37.510" Score="1" Body="&lt;p&gt;One more power cycle (full power off and power on) did it (kept HDMI cable plugged in throughout).  It would be nice, however, to have a method that didn't rely on pure luck, as I power cycled several times previously with no effect.  Perhaps xrandr can manually force a state change?&lt;/p&gt;&#xA;" OwnerUserId="6868" LastActivityDate="2017-12-07T17:17:37.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14101" PostTypeId="2" ParentId="14075" CreationDate="2017-12-08T15:28:12.597" Score="2" Body="&lt;p&gt;So this was interesting. Like Jeremy Wootten mentioned what you can put behind a .contract Exec is limited. So calling a shell script is part of the solution. So step one is creating something like the following contract file: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/share/contractor&lt;/code&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Resize to 1200px&#xA;MimeType=image;&#xA;Exec=resize-image-1200.sh %f&#xA;Gettext-Domain=pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Another challenge was debugging, how to get output from the script, to see errors. Using &lt;code&gt;exec&lt;/code&gt;, piping the output to a log file and &lt;code&gt;set -x&lt;/code&gt; where a solution. I ended up with the following file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/local/bin/resize-image-1200.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;exec 2&amp;gt; /tmp/resize-image-1200.sh.log # log errors to log file&#xA;exec 1&amp;gt;&amp;amp;2 # log standard output as errors&#xA;set -x # log commands before execution and log result&#xA;&#xA;DIR=$(dirname &quot;$1&quot;)&#xA;BASENAME=$(basename &quot;$1&quot;)&#xA;FILENAME=${BASENAME%.*}&#xA;EXT=${BASENAME##*.}&#xA;&#xA;convert &quot;$1&quot; -resize '1200x1200' &quot;$DIR/$FILENAME-1200px.$EXT&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This file needs execution rights, so run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo chmod +x /usr/local/bin/resize-image-1200.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strike&gt;What I haven't figured out yet is how to support resizing multiple images, since the %U only seems to contain the path to the first file.&lt;/strike&gt; By using &lt;code&gt;%f&lt;/code&gt; instead of &lt;code&gt;%U&lt;/code&gt; it looks like the shell script is executed per selected file and it gets the path to each file individually. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2017-12-08T15:42:14.243" LastActivityDate="2017-12-08T15:42:14.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14102" PostTypeId="1" CreationDate="2017-12-08T15:56:34.273" Score="0" ViewCount="261" Body="&lt;p&gt;So I installed firefox in /opt/ and I'm using it normally but I want it to also be the default pdf viewer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gvfs-mime --set application/pdf firefox.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and now firefox is the default viewer but only if I open a pdf in it from the terminal using xdg-open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open a pdf from pantheon-files it gives an error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Unable to open files or uris with this app&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How do I fix this? In my quest I ended up finding &lt;a href=&quot;http://bazaar.launchpad.net/~elementary-apps/pantheon-files/master/view/head:/src/Utils/MimeActions.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;MimeActions.vala&lt;/a&gt; in the pantheon-files source code but I can't figure out what in the world the arguments to those functions are (what is GOF.File? - I can't find anything on it). I even tried looking up a few methods like get_default_handler(), but literally couldn't find anything-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;which brings me back to the problem, how do I add a Firefox entry into that pantheon-files list of apps?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know there might have been a way easier method, but I don't regret anything.&lt;/p&gt;&#xA;" OwnerUserId="8377" LastActivityDate="2019-07-12T16:25:13.080" Title="In pantheon-files, right click -&gt; open with -&gt; other applications displays a small window with a list of applications. How do I add a new entry to it?" Tags="|pantheon-files|applications|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14103" PostTypeId="2" ParentId="14094" CreationDate="2017-12-08T20:23:43.670" Score="1" Body="&lt;p&gt;This guide helped in my case: &lt;a href=&quot;https://connectwww.com/how-to-solve-realtek-rtl8723be-weak-wifi-signal-problem-in-ubuntu/4625/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://connectwww.com/how-to-solve-realtek-rtl8723be-weak-wifi-signal-problem-in-ubuntu/4625/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem was that my wifi card had 2 antennae but only one was plugged in and the linux drivers were using the wrong one. This downloads new drivers and changes the &lt;code&gt;ant_sel&lt;/code&gt; option to 2. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/lwfinger/rtlwifi_new&#xA;cd rtlwifi_new&#xA;sudo make install&#xA;sudo modprobe -rv rtl8723be &#xA;sudo modprobe -v rtl8723be ant_sel=2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it doesn't solve the problem, try with &lt;code&gt;sudo modprobe -v rtl8723be ant_sel=1&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the problem was resolved, then use this command to make the change permanent across reboots:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=2&quot; | sudo tee /etc/modprobe.d/50-rtl8723be.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(or &lt;code&gt;ant_sel=1&lt;/code&gt;, as the case may be). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be aware that some updates replace the above configuration and so you might have to change this periodically. I made a bash script in my &lt;code&gt;home&lt;/code&gt; with the above commands (minus the &lt;code&gt;git clone&lt;/code&gt; part, of course) and run it when I see that the internet is unbearable slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, you might want to try disabling bluetooth. For some reason my laptop cannot connect on the internet if BT is enabled. &lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2017-12-08T20:23:43.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14104" PostTypeId="1" CreationDate="2017-12-09T03:34:23.247" Score="0" ViewCount="145" Body="&lt;p&gt;Reinstalled it, but it doesn't work, and icon doesn't appear on the top dock  &lt;/p&gt;&#xA;" OwnerUserId="12383" LastActivityDate="2023-12-11T15:05:20.640" Title="Accidentally uninstalled Bluetooth from Elementary OS Loki." Tags="|release-loki|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14105" PostTypeId="1" CreationDate="2017-12-09T06:09:44.567" Score="0" ViewCount="1247" Body="&lt;p&gt;My laptop fan runs continuously even when not using the application. CPU fan speed is 2300 RPM. Is that normal? This is my first time using elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Pk2gP.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="13023" LastEditorUserId="84" LastEditDate="2018-05-06T17:26:01.950" LastActivityDate="2023-12-25T19:05:10.580" Title="Laptop fan runs continuously even when not using the application" Tags="|performance|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14106" PostTypeId="2" ParentId="14083" CreationDate="2017-12-09T06:36:48.197" Score="0" Body="&lt;p&gt;I'm able to capture the lock event with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-monitor --session &quot;path='/org/gnome/ScreenSaver',interface='org.gnome.ScreenSaver',member='Lock'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The contents of the lock event looks like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;method call time=1512800651.865886 sender=:1.7 -&amp;gt; destination=:1.33 serial=1326 path=/org/gnome/ScreenSaver; interface=org.gnome.ScreenSaver; member=Lock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The unlock event can be captured using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-monitor --session &quot;type='signal',path='/org/gnome/SessionManager',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And looks like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;signal time=1512800661.088861 sender=:1.4 -&amp;gt; destination=(null destination) serial=237 path=/org/gnome/SessionManager; interface=org.freedesktop.DBus.Properties; member=PropertiesChanged&#xA;   string &quot;org.gnome.SessionManager&quot;&#xA;   array [&#xA;      dict entry(&#xA;         string &quot;SessionIsActive&quot;&#xA;         variant             boolean true&#xA;      )&#xA;   ]&#xA;   array [&#xA;   ]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course, you can specify both watch expressions to capture everything:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-monitor &quot;path='/org/gnome/ScreenSaver',interface='org.gnome.ScreenSaver',member='Lock'&quot; &quot;type='signal',path='/org/gnome/SessionManager',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here's a perl script that will output &lt;code&gt;locked&lt;/code&gt; when the screen is locked, and &lt;code&gt;unlocked&lt;/code&gt; when the screen is unlocked.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/perl&#xA;&#xA;my $capture = 0;&#xA;while (&amp;lt;&amp;gt;) {&#xA;&#xA;    # print &quot;locked&quot; to stdout if we see the 'lock screen' event&#xA;    if (/path\=\/org\/gnome\/ScreenSaver\; interface\=org\.gnome\.ScreenSaver\; member\=Lock/) {&#xA;        print &quot;locked\n&quot;;&#xA;    }&#xA;&#xA;    # To detect &quot;unlock screen&quot; events, we need to examine the&#xA;    # event data. Event data is indent from the rest of the&#xA;    # output, so we just need to collect all the indented lines&#xA;    # into a buffer and then examine the buffer contents.&#xA;&#xA;    # stop capturing if the line isn't indented&#xA;    if (!/^\s+/) {&#xA;        $capture = 0;&#xA;    }&#xA;&#xA;    # start capturing event data if we see the unlock event&#xA;    if ($capture eq 0) {&#xA;        next unless /path\=\/org\/gnome\/SessionManager\; interface\=org\.freedesktop\.DBus\.Properties\; member\=PropertiesChanged/;&#xA;        $capture = 1;&#xA;    }&#xA;&#xA;    # collect lines into a buffer, stripping the line endings&#xA;    chomp;&#xA;    $buf .= $_;&#xA;&#xA;    # if the event data indicates the session is now active, then&#xA;    # the screen was unlocked and we print &quot;unlocked&quot; to stdout&#xA;    if ($buf =~ /org\.gnome\.SessionManager/ &amp;amp;&amp;amp; $buf =~ /SessionIsActive/ &amp;amp;&amp;amp; $buf =~ /variant\s+boolean true/) {&#xA;        print &quot;unlocked\n&quot;;&#xA;        $capture = 0;&#xA;        $buf = &quot;&quot;;&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just pipe the output of &lt;code&gt;dbus-monitor&lt;/code&gt; into the script.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-monitor &quot;path='/org/gnome/ScreenSaver',interface='org.gnome.ScreenSaver',member='Lock'&quot; &quot;type='signal',path='/org/gnome/SessionManager',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'&quot; | ./script&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13022" LastEditorUserId="13022" LastEditDate="2017-12-09T17:51:34.837" LastActivityDate="2017-12-09T17:51:34.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14107" PostTypeId="2" ParentId="14066" CreationDate="2017-12-09T07:27:16.130" Score="2" Body="&lt;p&gt;If your chromebook supports PXE booting, then it's possible. Usually there is a &quot;network&quot; or &quot;PXE&quot; boot option, which may need to be enabled in the BIOS. It would require another machine to be configured so that it can serve the install media over the network to your chromebook.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check out &lt;a href=&quot;https://debian-administration.org/article/478/Setting_up_a_server_for_PXE_network_booting&quot; rel=&quot;nofollow noreferrer&quot;&gt;Setting up a server for PXE network booting&lt;/a&gt; for some instructions on setting up linux (Debian) to handle this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you're not familiar with PXE booting in general, you can check out the article on &lt;a href=&quot;https://en.wikipedia.org./wiki/Preboot_Execution_Environment&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wikipedia&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="13022" LastActivityDate="2017-12-09T07:27:16.130" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14108" PostTypeId="2" ParentId="14057" CreationDate="2017-12-09T07:35:01.967" Score="0" Body="&lt;p&gt;You're right. If you know your CalDav URL, then it's simple to add to Calendar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Calendar, you can click on the gear icon, then click &lt;em&gt;Add New Calendar...&lt;/em&gt;. For &lt;em&gt;Type&lt;/em&gt;, select &quot;CalDav&quot;, then enter the CalDave URL along with your username and password. Click &lt;em&gt;Create Calendar&lt;/em&gt; and your events should begin syncing.&lt;/p&gt;&#xA;" OwnerUserId="13022" LastActivityDate="2017-12-09T07:35:01.967" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14109" PostTypeId="2" ParentId="14038" CreationDate="2017-12-09T08:11:39.190" Score="0" Body="&lt;p&gt;You can modify the launcher so that it runs Opera automatically with the additional options. I tested by adding a third launch action. Now, I can right-click the Opera icon and select &lt;em&gt;New Window with &quot;O&quot;&lt;/em&gt;. You could also make this the default behavior. Here's how I did it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal, I edited the desktop info for Opera.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/applications/opera.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I appended &lt;code&gt;;NewWindowWithO&lt;/code&gt; to &lt;code&gt;Actions=NewWindow;NewPrivateWindow&lt;/code&gt; and then defined the action by adding the following to the bottom of the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Action NewWindowWithO]&#xA;Name=New Window with &quot;O&quot;&#xA;Exec=opera --show-opera-menu --new-window&#xA;TargetEnvironment=Unity&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save the changes. You should now be able to right-click the Opera icon in dock and select the new action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want the default action (left-click) to open with the &quot;O&quot; menu, then you can add &lt;code&gt;--show-opera-menu&lt;/code&gt; to the &lt;code&gt;Exec&lt;/code&gt; and &lt;code&gt;TryExec&lt;/code&gt; fields in the &lt;code&gt;[Desktop Entry]&lt;/code&gt; section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this file will be overwritten if you install a newer version of Opera, so you may want to delete or revert it to it's original before you update.&lt;/p&gt;&#xA;" OwnerUserId="13022" LastActivityDate="2017-12-09T08:11:39.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14110" PostTypeId="1" CreationDate="2017-12-09T08:40:30.400" Score="2" ViewCount="503" Body="&lt;p&gt;I want to have the login screen with a standard account not needing to input a password to login, but having a password input for the administrator account. But there seems to be no way to do this in elementary. Everyone has to enter a password at the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My son uses my laptop occasionally, and I'd like to be able let him be able to use a parentally controlled account without having to log into it every boot (which is what happens with &quot;log in automatically&quot; option) or for him having to memorize an unnecessary password.&lt;/p&gt;&#xA;" OwnerUserId="13025" LastActivityDate="2019-05-05T03:04:30.920" Title="Is there any way to have a standard account not need a password in the login screen?" Tags="|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14111" PostTypeId="2" ParentId="14102" CreationDate="2017-12-09T10:01:01.480" Score="1" Body="&lt;p&gt;At the bottom of the list, click on &quot;Other applications&quot;.  In the dialog that appears click on &quot;View all applications&quot;.  Make sure the &quot;set as default&quot; box is ticked then double click on the &quot;Firefox Browser&quot; entry.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-12-09T10:01:01.480" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14112" PostTypeId="2" ParentId="14110" CreationDate="2017-12-09T10:34:09.567" Score="1" Body="&lt;p&gt;Open a Terminal and type this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo passwd -d &amp;lt;username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where &lt;code&gt;&amp;lt;username&amp;gt;&lt;/code&gt; is replaced with your son's username. You should do this while being logged in to your own account, because to execute this command, you need to have sudo access.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The manpage for &lt;code&gt;passwd&lt;/code&gt; command (and specifically -d option) reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   -d, --delete&#xA;       Delete a user's password (make it empty). This is a quick way to disable a&#xA;       password for an account. It will set the named account passwordless.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2017-12-09T10:34:09.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14113" PostTypeId="2" ParentId="12972" CreationDate="2017-12-09T10:42:27.217" Score="1" Body="&lt;p&gt;I'm using these lines in my &lt;code&gt;.bashrc&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#if [ &quot;$color_prompt&quot; = yes ]; then&#xA;#    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '&#xA;#else&#xA;#    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '&#xA;#fi&#xA;parse_git_branch() {&#xA;    git branch 2&amp;gt; /dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/(\1)/'&#xA;}&#xA;if [ &quot;$color_prompt&quot; = yes ]; then&#xA;    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[01;31m\]$(parse_git_branch)\[\033[00m\]\$ '&#xA;else&#xA;    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w$(parse_git_branch)\$ '&#xA;fi&#xA;unset color_prompt force_color_prompt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it seems to have pretty much the same style as the default elementary OS bash prompt. As you can see, I have commented out the default PS1 setting so it is easier to revert the change. The important part is to put the new PS1 setting lines before the&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unset color_prompt force_color_prompt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;line. Otherwise the prompt will not have colors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/730758/180883&quot; title=&quot;How do I show the git branch with colours in Bash prompt?&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2444" LastActivityDate="2017-12-09T10:42:27.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14115" PostTypeId="1" CreationDate="2017-12-09T14:04:04.273" Score="0" ViewCount="153" Body="&lt;p&gt;I have installed yesterday elementary os, it's all good but i have a problem with my network card rtl8723be. Anytime i turn on my pc i should put those string in the terminal: &#xA;sudo modprobe -r rtl8723be&#xA;sudo modprobe rtl8723be ant_sel=1&#xA;After this wifi go good but do you have any idea to fix this, please?&lt;/p&gt;&#xA;" OwnerUserId="13026" LastActivityDate="2019-04-20T07:00:50.693" Title="Problem wifi with network card rtl8723be" Tags="|wifi|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14116" PostTypeId="1" AcceptedAnswerId="17309" CreationDate="2017-12-09T16:59:59.473" Score="2" ViewCount="343" Body="&lt;p&gt;Since an update to Skype 8.11.0.4 the microphone stopped working (also 8.12.76.7 (preview) isn't working). Checked with other applications, e.g. SoundRecorder, where the mic is working nicely.&#xA;Now I know that skype is using alsa and my &lt;code&gt;elementary os&lt;/code&gt; (&lt;code&gt;$ uname -a&lt;/code&gt; 4.10.0-42-generic #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 x86_64) uses &lt;code&gt;pulseaudio&lt;/code&gt;. Tried the solutions found in ubuntu-forums, like:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;remove &lt;code&gt;pulseaudio&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;remove the &lt;code&gt;.config/.pulse&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;use &lt;code&gt;pavucontrol&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;use &lt;code&gt;alsamixer&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;nothing worked. Any other idea?&lt;/p&gt;&#xA;" OwnerUserId="10451" LastEditorUserId="10451" LastEditDate="2017-12-10T16:23:47.967" LastActivityDate="2018-11-30T12:02:52.320" Title="Microphone only in Skype not working" Tags="|sound|skype|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14118" PostTypeId="2" ParentId="13547" CreationDate="2017-12-10T00:59:41.743" Score="2" Body="&lt;p&gt;Also not an expert but long story short, it takes a couple of measures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been using the following tool in combination with NordVPN, which seems to performs these measures automatically. &#xA;&lt;a href=&quot;https://github.com/Chadsr/NordVPN-NetworkManager&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Chadsr/NordVPN-NetworkManager&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd advice you to look for clients specific for your vpn provider.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm hoping we'll get to a place where this is more integrated into the Network manager itself and or more providers create clients that support linux. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-10T00:59:41.743" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14119" PostTypeId="2" ParentId="14105" CreationDate="2017-12-10T08:22:06.203" Score="0" Body="&lt;p&gt;Use the &lt;code&gt;top&lt;/code&gt; command in Terminal and check the %CPU column.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-12-10T08:22:06.203" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14120" PostTypeId="2" ParentId="4091" CreationDate="2017-12-10T21:11:03.883" Score="-3" Body="&lt;p&gt;Run &lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13038" LastEditorUserId="242" LastEditDate="2018-01-08T17:51:58.090" LastActivityDate="2018-01-08T17:51:58.090" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14121" PostTypeId="2" ParentId="11360" CreationDate="2017-12-10T23:41:03.803" Score="2" Body="&lt;p&gt;This was &lt;a href=&quot;https://github.com/elementary/photos/issues/153&quot; rel=&quot;nofollow noreferrer&quot;&gt;a bug&lt;/a&gt; with Photos which has recently been fixed. This should be resolved the next time Photos gets a new release and receives an update.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2017-12-10T23:41:03.803" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14122" PostTypeId="1" AcceptedAnswerId="14125" CreationDate="2017-12-10T23:53:10.633" Score="0" ViewCount="30" Body="&lt;p&gt;In my previous incarnation as a Mint and Windows user I could switch to the main desktop when using steam with a simple key combo, &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt;. I was playing a game on elementary OS via Steam for the first time last week and needed to get to the main desktop but no key kombo worked.  Can someone tell me how please? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="12218" LastEditorUserId="308" LastEditDate="2018-08-07T18:13:31.243" LastActivityDate="2018-08-07T18:13:31.243" Title="Switching apps/screens in Steam" Tags="|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14123" PostTypeId="1" AcceptedAnswerId="14256" CreationDate="2017-12-11T03:07:40.110" Score="0" ViewCount="3375" Body="&lt;p&gt;Is there a way to set the used DNS in elementaryOS Loki in a graphical manner?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following is the only working way that I have found to change the DNS when using DNSCrypt...&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Editing &lt;strong&gt;/etc/resolv.conf&lt;/strong&gt; which is a symlink for &lt;strong&gt;/run/resolvconf/resolv.conf&lt;/strong&gt; and adding to it:  &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;nameserver 127.0.0.1  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;One can use Scratch for editing the file, but I wondered if there was a way to change the used DNS in GUI software like in the Network Settings of the system.&lt;/p&gt;&#xA;" OwnerUserId="9326" LastActivityDate="2017-12-26T14:46:56.783" Title="Is there a built-in graphical way to set the DNS on elementaryOS Loki?" Tags="|networking|user-interface|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14124" PostTypeId="2" ParentId="10134" CreationDate="2017-12-11T09:59:24.763" Score="0" Body="&lt;p&gt;As a Russian learner, I encountered the same problem today after switching from ibus to fcitx.  I googled and find this question.  However I found the solution myself and share here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seemed to me this is a bug in fcitx.  After switching to Russian keyword layout, the keyboard does not take effect immediately and it only takes effect the second time you enter the app.  I just switch focus to other app and back the original app (by pressing and releasing alt-tab twice) where I want to type Russian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same problem does not occur when switching from English to other CJK input method.&lt;/p&gt;&#xA;" OwnerUserId="13040" LastActivityDate="2017-12-11T09:59:24.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14125" PostTypeId="2" ParentId="14122" CreationDate="2017-12-11T13:09:13.383" Score="2" Body="&lt;p&gt;I would try the workspace navigation shotcuts, like Super(Windows)+left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following issue might be relevant: &lt;a href=&quot;https://github.com/elementary/gala/issues/131&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/131&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-11T13:09:13.383" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14126" PostTypeId="2" ParentId="14123" CreationDate="2017-12-11T16:35:12.193" Score="0" Body="&lt;p&gt;You can edit a network connection in Network Settings, then you are able to add &lt;code&gt;additional DNS servers&lt;/code&gt; which will work alongside the automatic ones from DHCP (which are generally provided by networking hardware / ISP), or else you can specify to use only the DNS servers you want by selecting &lt;code&gt;Manual&lt;/code&gt; or &lt;code&gt;Automatic DHCP (Addresses Only)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is in the IPv4 and IPv6 tabs of the settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Editing &lt;code&gt;/etc/resolv.conf&lt;/code&gt; manually doesn't persist, it will be automatically overwritten (which is normal as different connections require different DNS like office intranet etc.), so I'd move away from that approach if possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-12-11T16:35:12.193" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14127" PostTypeId="2" ParentId="14104" CreationDate="2017-12-11T16:42:24.377" Score="0" Body="&lt;p&gt;You might need to run &lt;code&gt;sudo modprobe btusb&lt;/code&gt; on the command line if you uninstalled and disabled the kernel module.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example running &lt;code&gt;sudo lsmod | grep blue&lt;/code&gt; gives me the result: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bluetooth             540672  41 btrtl,hci_uart,btintel,btqca,bnep,btbcm,rfcomm,btusb&#xA;ecdh_generic           24576  1 bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can check if you have the above kernel modules available, and if not, you might need them, depending on your hardware setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can disable them again with &lt;code&gt;sudo modprobe -r btusb&lt;/code&gt; as an example. Let me know if you get it working. It can be quite fiddly and sometimes I need to remove &lt;code&gt;btusb&lt;/code&gt; and add it again to revive bluetooth after standby (not always), and if bluetooth is completely failing, you often need to shutdown and power off completely, not just restart to revive it.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-12-11T16:42:24.377" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14128" PostTypeId="2" ParentId="14085" CreationDate="2017-12-11T16:44:19.860" Score="0" Body="&lt;p&gt;Why don't you try disabling the kernel module &lt;code&gt;sudo modprobe -r btusb&lt;/code&gt; that should stop it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can enable again with &lt;code&gt;sudo modprobe btusb&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2017-12-11T16:44:19.860" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="14129" PostTypeId="1" CreationDate="2017-12-11T16:59:13.483" Score="0" ViewCount="202" Body="&lt;p&gt;I'm trying to get autofs work with nfs shares with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can mount them myself, but autofs do not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/Autofs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Autofs&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Used settings from that help.&lt;/p&gt;&#xA;" OwnerUserId="13003" LastActivityDate="2023-12-12T10:01:20.237" Title="Anyone got autofs work with Elementary OS?" Tags="|mount|sharing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14130" PostTypeId="2" ParentId="14129" CreationDate="2017-12-11T18:36:24.980" Score="0" Body="&lt;p&gt;I have autofs mounting nfs shares using &lt;code&gt;/net&lt;/code&gt; but not tried any other rules. So my &lt;code&gt;auto.master&lt;/code&gt; looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# auto.master&#xA;/net    -hosts&#xA;+auto.master&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I think &lt;code&gt;autofs.conf&lt;/code&gt; and &lt;code&gt;auto.net&lt;/code&gt; are default. Check &lt;code&gt;auto.net&lt;/code&gt; is executable (&lt;code&gt;chmod 755&lt;/code&gt;) as per the comment in that file. Restart the service, then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ls /net/&amp;lt;hostname&amp;gt;/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;should list the exported areas for the host.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm pretty sure &lt;code&gt;/net&lt;/code&gt; gets created when autofs starts, if not you can create it yourself with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mkdir /net&#xA;$ sudo chmod 755  /net&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and restart the service again.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2017-12-11T18:36:24.980" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14132" PostTypeId="2" ParentId="13280" CreationDate="2017-12-11T22:42:39.997" Score="0" Body="&lt;p&gt;I'm hoping the trick System76 has developed will be released and we can use it in ElementaryOS, see:&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7c7x8x/pop_os_mixeddpi_multimonitor_setup_on_elementaryos/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/7c7x8x/pop_os_mixeddpi_multimonitor_setup_on_elementaryos/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-11T22:42:39.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14133" PostTypeId="2" ParentId="396" CreationDate="2017-12-11T23:56:18.893" Score="0" Body="&lt;p&gt;I have done a bash script which uses Xwindow utilities such as xwininfo, xdotool and wmctrl.&#xA;All details and full Code of the script at&#xA;&lt;a href=&quot;http://fpkanarias.blogspot.com.es/2017/12/elementary-os-script-para-mostrar.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://fpkanarias.blogspot.com.es/2017/12/elementary-os-script-para-mostrar.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13045" LastActivityDate="2017-12-11T23:56:18.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14134" PostTypeId="1" CreationDate="2017-12-12T17:11:53.927" Score="0" ViewCount="5107" Body="&lt;p&gt;I want use onedrive as my cloud storage, I've found this (&lt;a href=&quot;http://xmodulo.com/sync-microsoft-onedrive-linux.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://xmodulo.com/sync-microsoft-onedrive-linux.html&lt;/a&gt;) on the web but the program doesn't support elementary OS.&#xA;If i could not find a way, I have no choose but changing my distro to mint&#xA;tnx &lt;/p&gt;&#xA;" OwnerUserId="13049" LastActivityDate="2020-01-08T06:54:05.310" Title="How can I use onedrive in elementary" Tags="|storage|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14135" PostTypeId="2" ParentId="14134" CreationDate="2017-12-12T17:48:26.993" Score="0" Body="&lt;p&gt;There are a few OneDrive clients out there. Might want to give these two a try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/xybu/onedrive-d-old&quot; rel=&quot;nofollow noreferrer&quot;&gt;OneDrive-d&lt;/a&gt; and &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/skilion/onedrive&quot; rel=&quot;nofollow noreferrer&quot;&gt;OneDrive Free Client&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Keep in mind that I have not tried either of these as I do not use OneDrive.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-12-12T17:48:26.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14136" PostTypeId="1" CreationDate="2017-12-12T20:11:24.183" Score="1" ViewCount="227" Body="&lt;p&gt;Recently I installed Elementary OS 0.4.1 Loki and the laptop goes black when I want to lock/suspend it (Win+L). Then, I can't do anymore and I've to do a force shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="13052" LastActivityDate="2017-12-12T20:11:24.183" Title="The screen goes black when I suspend the laptop" Tags="|release-loki|display|suspend|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14137" PostTypeId="2" ParentId="4879" CreationDate="2017-12-12T20:52:44.893" Score="1" Body="&lt;p&gt;I decided to try it. Although not just KDE, but KDE Neon. I added the ppa, updated cache, upgraded many packages and was that close to installing neon-desktop. Then I decided to try that in virtualbox first. Glad I did.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It was a disaster. At first the desktop didn't want to install, I received error about dpkg-divert that elementary-default-settings somehow conflicted with neon-settings, so I decided to remove that package and installation was successful. I got the plasma desktop eventually and it worked, but pantheon was destroyed. It became ugly and barely usable after all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, these two don't mix together. If you want KDE, you'll have to remove pantheon. Given how many things can go wrong in the process, you should prefer clean installation.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-12-12T20:52:44.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14138" PostTypeId="1" AcceptedAnswerId="14218" CreationDate="2017-12-13T01:17:00.760" Score="3" ViewCount="5880" Body="&lt;p&gt;I'm curious as to what the suggested method for adjusting screen refresh rate is. There doesn't seem to be an option under the display settings, despite being a fairly standard and important setting. It's unfortunate being locked at 60Hz on a 144Hz monitor. Any suggestions?&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-06-23T00:08:20.103" Title="Adjust Refresh Rate" Tags="|display|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14139" PostTypeId="2" ParentId="14033" CreationDate="2017-12-13T02:44:18.953" Score="0" Body="&lt;p&gt;Just an update - I finally built this machine and got it all working.  The 0.4.1 installer loaded and worked just fine.  After setup, I installed the most recent stable kernel - 4.14.5 as of this answer.  This kernel includes support for coffee lake but you have to enable video drivers (I'm using onboard graphics) via the kernel flag: i915.alpha_support=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works without this, but you'll get some screen tear.  It sounds like 4.15 will fully support 8th gen Intel CPUs when it's released.  In any case, all is well.  For reference, my system is as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;i7-8700k&lt;/li&gt;&#xA;&lt;li&gt;ASRock z370-itx&lt;/li&gt;&#xA;&lt;li&gt;16GB Crucial Ballistix DDR4 3000 RAM&lt;/li&gt;&#xA;&lt;li&gt;Samsung 960 EVO SSD&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Wireless, LAN, Audio, Bluetooth all work without a hitch.&lt;/p&gt;&#xA;" OwnerUserId="12849" LastActivityDate="2017-12-13T02:44:18.953" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14140" PostTypeId="2" ParentId="14134" CreationDate="2017-12-13T09:46:11.070" Score="1" Body="&lt;p&gt;You can try to fix the &lt;code&gt;./install.sh&lt;/code&gt; script at line 40 from&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    elementaryos|debian|ubuntu|linuxmint|raspbian)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    elementary|debian|ubuntu|linuxmint|raspbian)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2017-12-13T09:46:11.070" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14141" PostTypeId="2" ParentId="14057" CreationDate="2017-12-13T11:35:51.977" Score="0" Body="&lt;p&gt;It took me a while, but I figured it out. elementary's Calendar app does not support the webDav format, which is what is needed. For accessing the iCalendar, you can install the California calendar application which supports the specific format.&lt;/p&gt;&#xA;" OwnerUserId="2409" LastActivityDate="2017-12-13T11:35:51.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14143" PostTypeId="1" CreationDate="2017-12-13T19:53:43.497" Score="0" ViewCount="752" Body="&lt;p&gt;I've been having problems adding music files to both Noise and Lollypop libraries. Songs are showing twice, even though Files only show one file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uIaBm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uIaBm.jpg&quot; alt=&quot;Lollypop duplicate songs&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried clearing cache and resetting databases with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rm -rf ~/.cache/noise/&#xA;rm -rf ~/.local/share/noise/&#xA;rm -rf ~/.cache/lollypop/&#xA;rm -rf ~/.local/share/lollypop/ &lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but to no effect. Any ideas why this may be happening?&lt;/p&gt;&#xA;" OwnerUserId="13060" LastActivityDate="2019-05-08T07:01:10.157" Title="Duplicate songs in Noise and Lollypop" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14145" PostTypeId="1" CreationDate="2017-12-13T21:55:17.740" Score="0" ViewCount="173" Body="&lt;p&gt;I'm new to Linux (Elementary) and I can't seem to change my time from the 24h format to the 12h format which I do understand. Hope you can help.&lt;/p&gt;&#xA;" OwnerUserId="13061" LastActivityDate="2017-12-14T15:29:11.450" Title="How do I change the time from 24h to 12h" Tags="|settings|time|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14147" PostTypeId="1" AcceptedAnswerId="14148" CreationDate="2017-12-14T12:40:21.520" Score="1" ViewCount="1567" Body="&lt;p&gt;Currently when we press alt+tab it brings one app to foreground and brings next app if we keep pressing tab. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is there anyway to bring simple app switcher like in Ubuntu or Mint and then use arrow key to move to next and previous app instead of pressing tab.&lt;/li&gt;&#xA;&lt;li&gt;If I decide to modify the package which is responsible for switching apps, where can I start? Like what is the name of the package?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="13066" LastActivityDate="2017-12-14T12:51:32.610" Title="How to switch to simple app switcher" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14148" PostTypeId="2" ParentId="14147" CreationDate="2017-12-14T12:43:32.987" Score="2" Body="&lt;p&gt;I would recommend starting here: &lt;a href=&quot;https://github.com/p0pye/gala-elementary-alt-tab-switcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;gala-elementary-alt-tab-switcher&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Being on github you can easily access the code to modify it to suit your needs. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-12-14T12:43:32.987" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="14150" PostTypeId="2" ParentId="14147" CreationDate="2017-12-14T12:51:32.610" Score="0" Body="&lt;p&gt;This is handled by the Gala Elementary OS's Window Manager. &#xA;&lt;a href=&quot;https://github.com/elementary/gala/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to look around for previous discussions, there have been plenty. On &lt;a href=&quot;https://www.reddit.com/r/elementaryos/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/&lt;/a&gt; and in the issue queue for example.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-14T12:51:32.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14152" PostTypeId="2" ParentId="14145" CreationDate="2017-12-14T15:29:11.450" Score="3" Body="&lt;p&gt;Right click your displayed date/time and then click &quot;Date &amp;amp; Time Settings&quot; and then it literally asks if you want 12hr or 24.&lt;/p&gt;&#xA;" OwnerUserId="13068" LastActivityDate="2017-12-14T15:29:11.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14154" PostTypeId="1" CreationDate="2017-12-14T17:29:55.383" Score="0" ViewCount="234" Body="&lt;p&gt;All, I have a &lt;strong&gt;Dell XPS 13 series 9350&lt;/strong&gt;, with elementary OS Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have purchased a USB-C 3.0 Multi-Function Adapter, 3 USB ports and an Ethernet 10/100/1000 with the ax88179 chipset.  The USB ports are working but the Ethernet port is not.  When I plug the device in I get a window that says &lt;strong&gt;&lt;em&gt;&quot;disconnected Ethernet network&quot;&lt;/em&gt;&lt;/strong&gt; ... when I go to Network Settings &lt;strong&gt;&lt;em&gt;&quot;Wired Network&quot;&lt;/em&gt;&lt;/strong&gt; does not exist.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;LSUSB Output:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port&#xA;Bus 003 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub&#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I do not see any Ethernet device (though from my research the ax88179 is part of the 4.4.0 kernal)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice on how to troubleshoot?&lt;/p&gt;&#xA;" OwnerUserId="10103" LastEditorUserId="16827" LastEditDate="2019-12-06T05:17:32.507" LastActivityDate="2023-12-15T14:00:20.087" Title="USB 3.0 Network Adapter - Chipset ax88179" Tags="|release-loki|usb|ethernet|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14155" PostTypeId="1" CreationDate="2017-12-14T18:07:50.617" Score="0" ViewCount="162" Body="&lt;p&gt;I'm about to choose this Unix-based system for my everyday tasks. By the way, I've started to learn basics of programming, so this is gonna be cool to use this smooth, stylish system to browse internet and study. &lt;/p&gt;&#xA;" OwnerUserId="13069" LastEditorUserId="308" LastEditDate="2018-08-07T17:14:33.320" LastActivityDate="2018-08-07T17:14:33.320" Title="Is it real to install any IDE on elementary OS, like NetBeans, Code:Blocks, etc" Tags="|programming|ide|java|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14158" PostTypeId="2" ParentId="14155" CreationDate="2017-12-14T19:06:18.020" Score="1" Body="&lt;p&gt;There are many IDEs available for elementary OS. I personally use Android Studio, IntelliJ IDEA, Atom, VS Code, Scratch, and Gnome Builder. Bottomline: Whatever language you are working in or whatever your development needs are, you're covered.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-12-14T19:06:18.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14159" PostTypeId="2" ParentId="14154" CreationDate="2017-12-14T19:16:31.427" Score="0" Body="&lt;p&gt;All ... so I ran a&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get update&#xA;$ sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;All is right in the world !!!!&lt;/p&gt;&#xA;" OwnerUserId="10103" LastEditorUserId="19360" LastEditDate="2019-12-06T05:16:52.497" LastActivityDate="2019-12-06T05:16:52.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14160" PostTypeId="1" AcceptedAnswerId="14161" CreationDate="2017-12-15T02:51:10.393" Score="0" ViewCount="263" Body="&lt;p&gt;I just installed eOS today and after 6 hours I am pretty happy with the environment while all of the tasks I feel so far I need to be able to accomplish have been covered. &#xA;Question, in the Applications in the top left corner, two 'Files' icons-applications have appeared. The first one describes itself as 'Browse your files' while the second describes itself as 'Access and organize files'. What is up? :)&#xA;I have attached a screenshot as well.&lt;a href=&quot;https://i.stack.imgur.com/s3MLK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s3MLK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13072" LastActivityDate="2018-12-13T22:46:01.923" Title="In the Applications I have two 'Files' apps" Tags="|applications|icons|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14161" PostTypeId="2" ParentId="14160" CreationDate="2017-12-15T09:53:27.440" Score="1" Body="&lt;p&gt;&quot;Access and organize files&quot; is Nautilus. You can rename the icon in &lt;code&gt;/usr/share/applications/nautilus.desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-12-15T09:53:27.440" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14162" PostTypeId="2" ParentId="1702" CreationDate="2017-12-15T11:00:24.303" Score="0" Body="&lt;p&gt;I tried the answer above, and it would not work with my newer Airport Express.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a lot of reading, it seems that newer devices use UDP rather than TCP. PulseAudio 11+ supports this, however as eOS is based on Ubuntu LTS, there is no easy way to achieve this without compiling a newer PulseAudio yourself. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to compile and install PulseAudio 11.1 and use this rather than the system installed one. Details here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/Developer/PulseAudioFromGit/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/Developer/PulseAudioFromGit/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next problem is that Avahi and AirPort don't play well together. If you've enabled detection of AirPlay devices in paprefs, an incorrect IP beginning with 169.* is reported, and this causes playback to fail. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to disable auto detection in paprefs, and load the RAOP module manually in your &lt;code&gt;~/.config/pulse/default.pa&lt;/code&gt; file, and specify your Airport's IP address.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See julien-gargot's reply here near the bottom:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/hfujita/pulseaudio-raop2/issues/21&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/hfujita/pulseaudio-raop2/issues/21&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used &lt;code&gt;encryption=none&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything now works fine, and I've had no issues! Looking forward to the day when Ubuntu and eOS support this stuff out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Arch based distros and I presume Fedora will already come with latest PulseAudio 11.1 installed, so you only need to perform the final step of loading RAOP manually. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;John&lt;/p&gt;&#xA;" OwnerUserId="12777" LastActivityDate="2017-12-15T11:00:24.303" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14165" PostTypeId="2" ParentId="13366" CreationDate="2017-12-16T02:36:04.657" Score="1" Body="&lt;p&gt;&lt;strong&gt;tl;dr&lt;/strong&gt;: As a workaround, you could create a symlink, say, in your &lt;code&gt;Desktop&lt;/code&gt; or home directory to &lt;code&gt;/var/run/user/&amp;lt;UID&amp;gt;/gvfs/smb-share:server=yadayada&lt;/code&gt;. Then drag that symlink into the sidebar to create a bookmark, if you want to. That's how I manage to cope.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I, too, find this behavior frustrating. The &quot;native&quot; GTK3 file chooser for elementary OS Loki (&lt;code&gt;pantheon-filechooser-module&lt;/code&gt;) seems to be missing this functionality for the time being, but in applications using the older GTK2 one (LibreOffice for example), mounted network locations show up in the sidebar just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The closest I can find to anyone tracking this problem is &lt;a href=&quot;https://github.com/elementary/files/issues/129&quot; rel=&quot;nofollow noreferrer&quot;&gt;this GitHub issue&lt;/a&gt; for Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, I can't fathom why, in 2018, after cribbing tons of other ideas from OS X (docks, global menus, Miller columns, app stores, app bundles, &lt;code&gt;launchd&lt;/code&gt;, etc.), Linux distros still insist on hiding network filesystem mounts in perverse places like &lt;code&gt;~/.gvfs&lt;/code&gt;, or &lt;code&gt;/var/run/user/&amp;lt;UID&amp;gt;/gvfs&lt;/code&gt;. At least with OS X / macOS, mounted network filesystems are still relatively easy to find from the terminal or non-native (Java, GTK, QT) file pickers under &lt;code&gt;/Volumes&lt;/code&gt;—in the same place as all the other mounted filesystems.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastActivityDate="2017-12-16T02:36:04.657" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14169" PostTypeId="1" CreationDate="2017-12-16T14:38:39.200" Score="3" ViewCount="919" Body="&lt;p&gt;I can not send files by bluetooth from my cell phone to the computer, they always give an error and do not send (I do not get it on the computer that is trying to get a file to accept it or deny it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The funny thing is that from the computer files can be sent correctly to that mobile by bluetooth.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have looked at all the possible configuration options, I have tried the blueman also and nothing at all, I do not know what to do ...&lt;/p&gt;&#xA;" OwnerUserId="12568" LastActivityDate="2018-12-12T00:03:05.613" Title="I can not receive files from my phone by bluetooth" Tags="|bluetooth|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14177" PostTypeId="1" CreationDate="2017-12-18T08:06:13.480" Score="0" ViewCount="321" Body="&lt;p&gt;Complete newbie here, just installed EOS for its aesthetics, it's one great looking OS,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have always been using the screen off software to turn off my screen in windows os, is there a app like that for this OS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or can anyone tell me an alternative method to turn off the screen? &lt;/p&gt;&#xA;" OwnerUserId="13097" LastActivityDate="2018-06-16T16:46:20.430" Title="Any app to turn off screen of a laptop?" Tags="|display|system|battery|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14178" PostTypeId="2" ParentId="14177" CreationDate="2017-12-18T12:27:40.357" Score="0" Body="&lt;p&gt;You can make it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create an executable file with the following text:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sleep 1&lt;br&gt;&#xA;light-locker-command -a&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then make a desktop file where the exec line point to the file above and put it on the .local/share/applications/ folder.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will turn off the monitor, but if you have the option to lock the screen after the monitor turns off it will also lock the screen.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't mind to lock the screen after the monitor turns off, simply use the shortcut super+l. This will turn the monitor off and lock the screen.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastEditorUserId="5150" LastEditDate="2017-12-18T12:45:13.423" LastActivityDate="2017-12-18T12:45:13.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14180" PostTypeId="2" ParentId="14177" CreationDate="2017-12-18T12:44:08.537" Score="1" Body="&lt;p&gt;For that I have a separate folder in my home folder - &lt;code&gt;scripts&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a file for that - &lt;code&gt;~/scripts/turnscreenoff.sh&lt;/code&gt; which contents are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;#!/bin/bash&#xA;sleep 0.15; xset dpms force off&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sleep is needed because of keyup event that can wake up screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All you need now is to make the script executable: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;chmod +x ~/scripts/turnscreenoff.sh&lt;/code&gt; and assign a keyboard shortcut to that script in keyboard settings.&lt;/p&gt;&#xA;" OwnerUserId="8598" LastActivityDate="2017-12-18T12:44:08.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14181" PostTypeId="1" CreationDate="2017-12-18T20:36:16.807" Score="0" ViewCount="470" Body="&lt;p&gt;I am fairly new to elementary OS and Ubuntu/Linux. I would like to install Windows alongside elementary OS and do a dual boot system. I have found some posts on it but they are older then two years old. I am not a computer genius either and need help with creating the partition in GParted. I found that I need to make it NTFS but my GParted wont let me chose this. I also have the Windows 10 Pro disc even though I do not have an optical drive, not sure if this is an issue. I think I can download Windows 10 Disc Image ISO File to fix the disc thing but not sure. Any help is welcome. Old post I was looking at &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/6317/how-can-i-install-windows-after-ive-installed-ubuntu#comment29853_6321&quot;&gt;https://askubuntu.com/questions/6317/how-can-i-install-windows-after-ive-installed-ubuntu#comment29853_6321&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13100" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:43.757" LastActivityDate="2019-05-08T10:04:43.757" Title="Installing Windows alongside elementary OS" Tags="|release-loki|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14183" PostTypeId="1" AcceptedAnswerId="14194" CreationDate="2017-12-18T23:44:39.623" Score="1" ViewCount="213" Body="&lt;p&gt;For the past couple of days, I have noticed that my mouse buttons will stop working and not allow me to click on anything. I have found that anytime I try to click on a separate window, Applications, or settings in the task bar, the buttons stop working. If I Alt + Tab, or Windows key + A (on a Windows keyboard), my mouse will begin working again until the next time I click on any of the aforementioned items. My keyboard seems to work even when the mouse buttons do not. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am new to elementary, just installing it about 3 weeks ago, and I am not sure where to begin troubleshooting. Any help or feedback would be greatly appreciated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Andrew&lt;/p&gt;&#xA;" OwnerUserId="13103" LastActivityDate="2017-12-20T00:26:16.683" Title="Mouse buttons become unresponsive" Tags="|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14187" PostTypeId="2" ParentId="14181" CreationDate="2017-12-19T02:31:41.673" Score="1" Body="&lt;p&gt;If you can do it, I would wipe the machine, install Windows first using the whole drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install elementary, picking the option to &quot;install alongside Windows,&quot; then adjust the size with the slider.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you partition now, and install Windows, Windows will overwrite the MBR, and you won't be able to boot back to elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can do that, then go in and overwrite the MBR again, but I just haven't taken the time to figure it out.&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2017-12-19T02:31:41.673" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14192" PostTypeId="1" CreationDate="2017-12-19T18:13:59.403" Score="0" ViewCount="1080" Body="&lt;p&gt;Is there any way to get daily/beta builds of elementary OS installed? I think there is a daily ppa or something, but is that still even maintained? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13113" LastEditorUserId="13113" LastEditDate="2017-12-19T22:45:07.043" LastActivityDate="2017-12-21T14:40:15.153" Title="Daily builds for elementary OS?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14194" PostTypeId="2" ParentId="14183" CreationDate="2017-12-20T00:20:13.530" Score="1" Body="&lt;p&gt;Here is the fix to this problem: I performed 3 updates just before noticing these issues. I removed each and tested, and no longer experience the issue. I was unable to pinpoint if it was just one of the upgrades or a combination of them together. The updates were Intel-microcode 3.20170707.1, nvidia-304, and nvidia-340. Please keep in mind that I had to reboot before I saw the fix.&lt;/p&gt;&#xA;" OwnerUserId="13103" LastEditorUserId="13103" LastEditDate="2017-12-20T00:26:16.683" LastActivityDate="2017-12-20T00:26:16.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14195" PostTypeId="1" CreationDate="2017-12-20T05:54:49.567" Score="0" ViewCount="1226" Body="&lt;p&gt;I know where the AppCenter is, and know how to download them, but I cant find the things to actually use the,. Obviously I am new to elementary OS. If I want to use, say Abiword, where is the icon to click on?&lt;/p&gt;&#xA;" OwnerUserId="13114" LastEditorUserId="686" LastEditDate="2017-12-28T12:22:37.690" LastActivityDate="2017-12-28T12:22:37.690" Title="Where are the apps?" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14196" PostTypeId="2" ParentId="14195" CreationDate="2017-12-20T12:04:33.183" Score="0" Body="&lt;p&gt;Just go in app center and search by &quot;abiword&quot;. You can press the button free in its front or click in the icon and press free. If the app has price, you can click on the triangle, and put 0 and press enter and the app will be download free.&lt;/p&gt;&#xA;" OwnerUserId="13109" LastActivityDate="2017-12-20T12:04:33.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14197" PostTypeId="2" ParentId="14195" CreationDate="2017-12-20T12:58:47.110" Score="2" Body="&lt;p&gt;elementary does not have an active desktop by default. Therefore you will not see applications and/or other files available there. You can find them in the Slingshot menu, assuming you have already installed them,  which is like the Start menu on Windows. This menu can be accessed by clicking on the icon in the top left of the screen (or by pressing the Windows key + Space) and searching through the items listed (they are sorted alphabetically). &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-12-20T12:58:47.110" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14198" PostTypeId="1" AcceptedAnswerId="14199" CreationDate="2017-12-20T15:04:41.963" Score="0" ViewCount="186" Body="&lt;p&gt;I come from Windows and it is the first time that I will be in Linux. It turns out that in windows there is an Intel application that allows me to modify the brightness, the saturation, the gamma.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The native color of the laptop is quite dull, and I would like to saturate it a bit. But I can not find anything to do it, search a thousand times in google and nothing, the section &quot;color&quot; in elementary settings is useless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know what else to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I put images of the windows application, although they are in Spanish.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6JyWl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6JyWl.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SSBfX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SSBfX.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13007" LastActivityDate="2017-12-20T15:21:32.023" Title="Does anyone know a program that does this?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14199" PostTypeId="2" ParentId="14198" CreationDate="2017-12-20T15:21:32.023" Score="0" Body="&lt;p&gt;xrandr is what you're looking for. I use it to tweak the gamma of my screen, but you can use it for all sorts of useful things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/xrandr&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/xrandr&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2017-12-20T15:21:32.023" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="14200" PostTypeId="1" CreationDate="2017-12-20T15:44:02.637" Score="1" ViewCount="77" Body="&lt;p&gt;I would like to start/stop music from a bash script. Already tried looking in noise --help, but that lists none.&lt;/p&gt;&#xA;" OwnerUserId="36" LastActivityDate="2018-07-27T03:01:13.153" Title="Noise playback control from terminal" Tags="|music|command-line|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14205" PostTypeId="1" CreationDate="2017-12-21T13:14:03.877" Score="1" ViewCount="750" Body="&lt;p&gt;For my Linux installation (Elementary OS), I have split a 500 GB SSD as follows:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;20 GB root&lt;/li&gt;&#xA;&lt;li&gt;16 GB swap &lt;/li&gt;&#xA;&lt;li&gt;464 GB /home&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The problem is, that &lt;code&gt;Pantheon Files&lt;/code&gt; is only showing a 20 GB root partition as a device and the rest of it is not shown (as you can see). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: &lt;strong&gt;Why is only a 20 GB partition shown as a device?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NCch3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NCch3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another issue is, that I have two physical 4 TB drives. I use them under Windows 10. One of them is called &quot;backup&quot;, the other one is not show under Elementary!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Why is Elementary showing me only the &quot;backup&quot; drive??&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what the program &lt;code&gt;disks&lt;/code&gt; is showing me. I expect the same thing from &lt;code&gt;Pantheon-Files&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qR5gD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qR5gD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13124" LastEditorUserId="13124" LastEditDate="2017-12-21T13:32:10.937" LastActivityDate="2017-12-21T13:32:10.937" Title="Files is not showing hard drives and partitions" Tags="|pantheon-files|disk-management|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14206" PostTypeId="2" ParentId="14192" CreationDate="2017-12-21T14:40:15.153" Score="1" Body="&lt;p&gt;There is a daily PPA, and it looks like many of the packages have been updated within the last month:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/daily&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/daily&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12849" LastActivityDate="2017-12-21T14:40:15.153" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14207" PostTypeId="1" AcceptedAnswerId="14209" CreationDate="2017-12-21T16:31:06.677" Score="1" ViewCount="227" Body="&lt;p&gt;I managed to change the gamma with redshift, but it change the color of the screen and I do not want it to do that function.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I make the color of the screen using redshift normal?&lt;/p&gt;&#xA;" OwnerUserId="13007" LastEditorUserId="13007" LastEditDate="2017-12-21T18:30:36.263" LastActivityDate="2017-12-21T21:01:30.050" Title="Temperature color?" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14209" PostTypeId="2" ParentId="14207" CreationDate="2017-12-21T20:23:24.433" Score="1" Body="&lt;p&gt;Near the top of the redshift.conf file (line 4 &amp;amp; 5 most likely) there are temperature settings for day and night. Set them both to around 6500 and you'll be good&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2017-12-21T21:01:30.050" LastActivityDate="2017-12-21T21:01:30.050" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14210" PostTypeId="2" ParentId="10472" CreationDate="2017-12-21T21:27:36.133" Score="0" Body="&lt;p&gt;You can also manage your Application menu with &lt;em&gt;menulibre&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:menulibre-dev/daily&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install menulibre&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can execute &lt;code&gt;menulibre&lt;/code&gt; in terminal and you’ll get simple GUI to manage you Application menu. Probably that’s more convenient - you can remove apps that you don’t use really and add new apps that didn’t automatically installed desktop entry.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2017-12-21T21:27:36.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14211" PostTypeId="1" CreationDate="2017-12-22T06:29:45.533" Score="3" ViewCount="4361" Body="&lt;p&gt;I'm using the latest Nvidia graphics drivers. They're working very well, but sometimes when my desktop wakes up from suspend, I get a black screen, before and/or after I log in. The screen will light up and stay black. Sometimes the issue is resolved by pressing the power button on the monitor to restart it. If it doesn't work, I have to press F1 and restart lightdm the fix it. It's very annoying and I would really like to be able to fix it. I'm currently using elementary os 0.4.1 and I have a GTX 760 (OEM). With black screen I actually mean it looks like the screen fades out, it also happens sometimes when I close a fullscreen application.&lt;/p&gt;&#xA;&lt;p&gt;Edit: I'm sorry for the late response. In my case this was related to a problem with the monitor. When I replaced it the problem was solved. It's worth considering your monitor might be bad.&lt;/p&gt;&#xA;" OwnerUserId="8799" LastEditorUserId="8799" LastEditDate="2021-08-25T07:07:34.517" LastActivityDate="2021-08-25T07:07:34.517" Title="Black screen after wake up from suspend mode" Tags="|release-loki|nvidia|graphics|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="14215" PostTypeId="2" ParentId="11912" CreationDate="2017-12-22T12:03:32.800" Score="1" Body="&lt;p&gt;Do the following steps to install amdgpu-pro drivers for Radeon RX 480:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Download driver &lt;a href=&quot;https://www2.ati.com/drivers/linux/ubuntu/amdgpu-pro-17.50-511655.tar.xz&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www2.ati.com/drivers/linux/ubuntu/amdgpu-pro-17.50-511655.tar.xz&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Go to your Downloads directory &lt;code&gt;cd ~/Downloads&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Unpack the driver file &lt;code&gt;tar -Jxvf amdgpu-pro-17.50-511655.tar.xz&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) Go to the unpacked file &lt;code&gt;cd ~/Downloads/amdgpu-pro-17.50-511655&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5) Open the file &lt;code&gt;amdgpu-install&lt;/code&gt; with a text editor and change the following line, so you wont get the &quot;Unsupported OS&quot; error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;case &quot;$ID&quot; in&#xA;    ubuntu)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change it into this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;case &quot;$ID&quot; in&#xA;    elementary)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;6) Now install dirvers &lt;code&gt;./amdgpu-install -y&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13124" LastActivityDate="2017-12-22T12:03:32.800" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14216" PostTypeId="1" CreationDate="2017-12-22T12:37:30.343" Score="0" ViewCount="88" Body="&lt;p&gt;The HPLIP installed version not supported my HP printer 3070a but Linux Mint, Deepin and other OS support my printer. How do i make it work?&lt;/p&gt;&#xA;" OwnerUserId="13127" LastActivityDate="2018-12-18T04:08:01.403" Title="PRINTER HP 3070A HPLIP VERSION NOT SUPPORTED" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14218" PostTypeId="2" ParentId="14138" CreationDate="2017-12-22T14:19:26.397" Score="2" Body="&lt;p&gt;A solution from the Ubuntu forum:&#xA;&lt;br&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/questions/147580/how-to-see-change-screen-refresh-rate-or-monitor-frequency#155351&quot;&gt;https://askubuntu.com/questions/147580/how-to-see-change-screen-refresh-rate-or-monitor-frequency#155351&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-12-22T14:19:26.397" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14220" PostTypeId="2" ParentId="14216" CreationDate="2017-12-22T19:23:38.490" Score="1" Body="&lt;p&gt;If it's supported in Ubuntu 16.04, it's also supported on eOS Loki. I had a similar problem with a HP printer. When you first plug it in, you have to select it from a list. The names are approximate. I have a Deskjet Ink Advantage 3785. When I selected from the Ink Advantage series it didn't work, I had to select it from the Deskjet 3700 series. So try reinstalling it with a different series.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2017-12-22T19:23:38.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14221" PostTypeId="1" AcceptedAnswerId="14225" CreationDate="2017-12-22T20:15:43.693" Score="1" ViewCount="1552" Body="&lt;p&gt;Is it possible to run Nvidia CUDA Toolkit on Elementary OS? And how?&lt;/p&gt;&#xA;" OwnerUserId="13128" LastActivityDate="2017-12-23T08:17:36.807" Title="Does Nvidia CUDA Toolkit run on Elementary OS?" Tags="|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14223" PostTypeId="1" AcceptedAnswerId="14224" CreationDate="2017-12-23T05:08:04.810" Score="0" ViewCount="64" Body="&lt;p&gt;I've been using Elementary OS for at least a week now, and I want to go and try another Linux, but Elementary keeps reading my USB as ms dos and not able to boot from. I keep trying to format it, but it won't change. Yet on Disks, it says it is fat32.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/KRJtU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KRJtU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13130" LastActivityDate="2017-12-23T07:33:25.143" Title="Elementary OS keeps reading my USB's format as ms dos" Tags="|format|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14224" PostTypeId="2" ParentId="14223" CreationDate="2017-12-23T07:33:25.143" Score="0" Body="&lt;p&gt;It's just the same. You don't need to worry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try reading it on a Windows or OSX machine and it'll be readable as FAT32.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-12-23T07:33:25.143" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14225" PostTypeId="2" ParentId="14221" CreationDate="2017-12-23T08:17:36.807" Score="1" Body="&lt;p&gt;Since Elementary OS is based on Ubuntu 16.04 LTS, it should work fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For actual instructions for the toolkit, go here: &lt;a href=&quot;http://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13130" LastActivityDate="2017-12-23T08:17:36.807" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14227" PostTypeId="2" ParentId="13488" CreationDate="2017-12-23T16:20:39.837" Score="1" Body="&lt;p&gt;I had exactly same problem. And I guess you didn't check &lt;strong&gt;'Create the entry for all users (requires superuser privileges)'&lt;/strong&gt; on Tools -&gt; Create Desktop Entry.&#xA;You should check this one.&lt;/p&gt;&#xA;" OwnerUserId="13133" LastActivityDate="2017-12-23T16:20:39.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14228" PostTypeId="1" CreationDate="2017-12-23T18:12:29.767" Score="1" ViewCount="679" Body="&lt;p&gt;I recently started using Elementary, and I would like to allocate some more of my disks free space to the root partition. I did some searching online, but did not find a solution that worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how my disks are set up: &lt;a href=&quot;https://i.stack.imgur.com/uB0wP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uB0wP.png&quot; alt=&quot;image&quot;&gt;&lt;/a&gt;&#xA;How can I extend sda6 to fill up the entirety of the unallocated space?&lt;/p&gt;&#xA;" OwnerUserId="13132" LastActivityDate="2024-04-01T23:03:25.537" Title="How do I extend the root partition?" Tags="|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14230" PostTypeId="1" CreationDate="2017-12-23T23:28:47.517" Score="0" ViewCount="377" Body="&lt;p&gt;I am not very experienced on Linux and get caught in a doubt, i have recently purchased an acer travelmate P4 and heard about the bios issues caused by ubuntu 17.10 on lenovo notebooks, and that it was being caused by SPI driver on ubuntu's 4.13 kernel, which comes along with 17.10. I've had just installed Elementary OS, which is based on Ubuntu, and updated the kernel to 4.15RC4, downloading the .deb's and installing them. Since i'm using a kernel version launched after the 4.13, may the SPI driver be present and cause any issue on my pc? I've seen that there are some dell, acer, hp notebooks that are also being affected by that issues.&lt;/p&gt;&#xA;" OwnerUserId="13142" OwnerDisplayName="valmor junior" LastActivityDate="2024-03-23T13:06:30.763" Title="Issues on bios caused by kernel 4.13 on ubuntu 17.10 may affect my computer if i'm using elementaryOS and update kernel to 4.15 rc4?" Tags="|kernel|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14233" PostTypeId="2" ParentId="14115" CreationDate="2017-12-24T11:52:59.433" Score="1" Body="&lt;p&gt;That is easy&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options rtl8723be ant_sel=1&quot; | sudo tee /etc/modprobe.d/rtlant.conf&lt;/pre&gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is the same for any module parameter options {module-name} {parameter-setting}  use sudo tee -a if a file exists and you just want to append to the file.  Parameter options need to be in /etc/modprobe.d/{whatevername}.conf&lt;/p&gt;&#xA;" OwnerUserId="4188" LastActivityDate="2017-12-24T11:52:59.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14234" PostTypeId="2" ParentId="9628" CreationDate="2017-12-24T16:01:58.093" Score="1" Body="&lt;p&gt;This isn't really a complete answer, and is probably less of a manual solution, but I'm hoping we can use Pop!_OS new solution in some way... I understand this is done by the &lt;a href=&quot;https://github.com/pop-os/system76-driver/blob/master_artful/system76-hidpi-daemon&quot; rel=&quot;nofollow noreferrer&quot;&gt;system76-hidpi-daemon&lt;/a&gt; which is part of the &lt;a href=&quot;https://github.com/pop-os/system76-driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;system76-driver&lt;/a&gt;&#xA;Install instructions: &lt;a href=&quot;http://support.system76.com/articles/system76-driver/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.system76.com/articles/system76-driver/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I, however, have no idea if it's a good idea to install the driver on a non System76 computer. I'd prefer to, in some way, only run the hidpi deamon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More information from their blog:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Our engineer, David has been working on improving HiDPI.  While others in the desktop community are focused on Wayland, David has been working on improving HiDPI experience on X, especially if you have an Nvidia video card.  When completed, you’ll be able to have a uniform experience when connecting low DPI monitors into HiDPI enabled laptops in the X session.  What does that mean?  It means that when you plug in your monitor the right thing will happen.   We are planning a rolling implementation, meaning that we would introduce these features over time.  We hope to show progress on this feature over the next few weeks.  So watch this space.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.system76.com/post/167099907368/popos-development-re-org-upstream-cooperation&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.system76.com/post/167099907368/popos-development-re-org-upstream-cooperation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Last week, I talked about HiDPI multimonitor work that was in progress.  I’m happy to report that, we have made progress.  Both NVIDIA and Intel laptops with HiDPI screens can now automatically configure mixed-dpi multi-monitor setups within Pop!_OS.  The work needs further testing and refinement before it’s ready to distribute to customers.  Going forward, we plan to deliver a seamless multi-monitor HiDPI experience tailored to the different capabilities of Intel and NVIDIA graphics in Pop!_OS.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.system76.com/post/167349126968/hidpi-extravaganza-putting-the-lid-on-hardware&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.system76.com/post/167349126968/hidpi-extravaganza-putting-the-lid-on-hardware&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The work on HiDPI nears completion.  The HiDPI work is a seminal  project that we are extremely proud of as a company.  When this work is complete, you will be able to have smooth experience with multiple monitors of different resolutions and have it do the right thing. Right now, a lot of work is in testing, handling corner cases, and focusing on the little details that build together into a great experience that just works!&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.system76.com/post/168094703848/ux-updates-and-hidpi-aww-yeah&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.system76.com/post/168094703848/ux-updates-and-hidpi-aww-yeah&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My post on this on Reddit: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7c7x8x/pop_os_mixeddpi_multimonitor_setup_on_elementaryos/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/7c7x8x/pop_os_mixeddpi_multimonitor_setup_on_elementaryos/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;We are currently working on adding GSettings and a DBus API to allow other distros to create their own graphical interfaces to the daemon.  The HiDPI daemon, which is currently part of the System76 driver, will become its own package and move into Pop!_OS proper.  That means anyone who runs Pop!_OS will be able to use the HiDPI daemon as opposed to just System76 customers.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://blog.system76.com/post/171934557903/popos-1804-testing-iso-coming-soon-updates-on&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.system76.com/post/171934557903/popos-1804-testing-iso-coming-soon-updates-on&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-03-23T00:10:01.940" LastActivityDate="2018-03-23T00:10:01.940" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14235" PostTypeId="2" ParentId="14230" CreationDate="2017-12-24T19:08:44.350" Score="0" Body="&lt;p&gt;Well, what you can do is to run in a terminal to check whether the new code (intel-spi driver) is enabled/built as part of your Linux kernel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ cat  /boot/config-`uname -r` | grep CONFIG_SPI_INTEL_SPI&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If it returns NO details or as below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# CONFIG_SPI_INTEL_SPI_PLATFORM is not set&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, it is safe to assume that you can proceed. (Assuming that your laptop model may have the problem bios - Insyde UEFI that's affected). You can also open /boot/config-(kernel version) to read through the configuration options for the kernel(s). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="9476" LastActivityDate="2017-12-24T19:08:44.350" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14236" PostTypeId="1" AcceptedAnswerId="14567" CreationDate="2017-12-24T19:51:49.863" Score="0" ViewCount="334" Body="&lt;p&gt;Hi I have just installed Elementary OS Loki 0.4.1, on to my acer aspire 5742 PEW71 laptop. I have it dual booted with windows 7 which can alter screen brightness, however when i change the brightness in windows 7 it does not alter Element OS.&#xA;It has received all the latest updates and have tried the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;xbacklight&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;pre&gt;&lt;code&gt;cd /sys/class/backlight/*/ &#xA;sudo chmod 777 ./brightness &#xA;sudo echo $(cat max_brightness) &amp;gt; ./brightness``&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13057" LastEditorUserId="578" LastEditDate="2017-12-27T10:30:46.447" LastActivityDate="2018-02-04T07:32:02.490" Title="cannot change screen brightnes" Tags="|release-loki|brightness|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14237" PostTypeId="1" CreationDate="2017-12-25T07:58:56.180" Score="1" ViewCount="1175" Body="&lt;p&gt;I just bought the program. Since this is a very large download, I am surprised that the speed is 14.4 kb/sec which just barely crawls,  It even dropped at a lower speed than that; like 9 kb/sec,  At the speed, I am getting, it will take from 1 to 2 days before it is finished.  Never have I got such slow speeds as that on the internet.  Dial-up was faster than that. Depending upon a program, I have gotten speeds from approx. 150 kb/sec upwards to 3 Mb/sec.  If this os takes a lot of time to download, it is possible that it could hang up and unable to resume where I left off.  This has happened to me and I had to start all over again.  It would be worth it to me to purchase a ready-made os or flash drive.&lt;br&gt;&#xA;By the time I get an answer, I hope this download is successful.  Also, where I live I am unable to get the fastest wi fi as I have to rely on satellite and with so much snow and ice here with extream low temperatures, sometimes the wi fi goes out.  &lt;/p&gt;&#xA;" OwnerUserId="13144" LastActivityDate="2018-02-21T10:55:36.793" Title="Why does this os slow to download?" Tags="|download|" AnswerCount="2" CommentCount="0" ClosedDate="2018-01-23T10:04:35.560" ContentLicense="CC BY-SA 3.0" />
  <row Id="14238" PostTypeId="2" ParentId="14237" CreationDate="2017-12-25T09:17:20.543" Score="2" Body="&lt;p&gt;You can use a torrent client to speed up the download. I think the low speed you are getting is caused by your ISP being so far away from the elementary servers. Using a torrent link from the magnet icon will probably increase the speed. &lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="26" LastEditDate="2018-02-21T10:55:36.793" LastActivityDate="2018-02-21T10:55:36.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14239" PostTypeId="2" ParentId="14237" CreationDate="2017-12-25T09:52:19.617" Score="2" Body="&lt;p&gt;Tried the download link and it works fine, at least on my location. Others near your area/can test connections over VPN can at least try to check if your mirror is experiencing problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since you mentioned that you're using satellite and experiencing snow, that seems to be the most plausible reason why your downloads are so slow. For such connections, try using the magnet link instead of the direct link for a more consistent and reliable download.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-12-25T09:52:19.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14243" PostTypeId="2" ParentId="12828" CreationDate="2017-12-25T16:02:19.320" Score="0" Body="&lt;p&gt;The previous answer has worked until I restart my system. But this script is working for me permanently&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;https://github.com/zant95/elementary-dropbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12724" LastActivityDate="2017-12-25T16:02:19.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14244" PostTypeId="2" ParentId="14115" CreationDate="2017-12-25T18:06:40.740" Score="0" Body="&lt;p&gt;Stop doing those things, follow this guide and it will work for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the same card as you, but another model (different numbering) and this guide solved all the problems I had with wifi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You are lucky that the guide is the same as for your card, I had to change some numbers for mine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://connectwww.com/how-to-solve-realtek-rtl8723be-weak-wifi-signal-problem-in-ubuntu/4625/&quot; rel=&quot;nofollow noreferrer&quot;&gt;guide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13007" LastActivityDate="2017-12-25T18:06:40.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14245" PostTypeId="1" AcceptedAnswerId="14248" CreationDate="2017-12-25T19:43:14.617" Score="0" ViewCount="96" Body="&lt;p&gt;Anybody know when there will be new updates, Loki style, Freya, Luna, or 1.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can not find any type of information, I am new and I do not know how often there is a big update.&lt;/p&gt;&#xA;" OwnerUserId="13007" LastActivityDate="2017-12-26T00:21:16.627" Title="When more updates?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14248" PostTypeId="2" ParentId="14245" CreationDate="2017-12-26T00:21:16.627" Score="1" Body="&lt;p&gt;The next release will be 0.5 (Juno), and it will be based on Ubuntu 18.04. The earliest possible release date would be sometime in April of 2018, but It might be a couple of months later until it actually gets released. Hope this helped!&lt;/p&gt;&#xA;" OwnerUserId="13113" LastActivityDate="2017-12-26T00:21:16.627" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14250" PostTypeId="1" CreationDate="2017-12-26T05:40:05.427" Score="2" ViewCount="121" Body="&lt;p&gt;I have allocated a huge amount of space on my hard disk for elementary OS, as can be seen in GParted image. However, I get the message of &quot;insufficient space&quot; for the file system.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yywRL.png&quot; alt=&quot;Low space message&quot;&gt;&lt;br&gt;&#xA;(low disk space in &amp;lt;&amp;lt; Root file system &gt;&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I installed elementary OS Freya 3 years ago, I gave it all one of my two discs, and did the automatic installation.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/6ZyES.png&quot; alt=&quot;GParted graphic information&quot;&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How can this happen, and how can I correct it?&lt;/strong&gt; The system works perfectly well. &lt;strong&gt;&lt;em&gt;Is it a false message and is there really no problem?&lt;/em&gt;&lt;/strong&gt; That space increased from 340 Mb to 1.1 Gb when erasing old kernels.&lt;/p&gt;&#xA;" OwnerUserId="4602" LastEditorUserId="16827" LastEditDate="2019-01-09T08:04:37.100" LastActivityDate="2019-01-09T08:04:37.100" Title="Low disk space in root file system error" Tags="|release-freya|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14252" PostTypeId="2" ParentId="3664" CreationDate="2017-12-26T07:48:53.493" Score="1" Body="&lt;p&gt;Try resizing the &quot;Device Search&quot; window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was struggling in this same situation for long and for me the answer was simpler than I expected.&lt;/p&gt;&#xA;" OwnerUserId="13154" LastActivityDate="2017-12-26T07:48:53.493" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14254" PostTypeId="1" AcceptedAnswerId="14264" CreationDate="2017-12-26T12:58:57.450" Score="0" ViewCount="318" Body="&lt;p&gt;I have installed some certificates and after I did it i have a lot of problems with the ppa and git:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt; returns errors for missing release files where they actually are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none&#xA;E: The repository 'https://deb.opera.com/opera-stable/dists/stable stable Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;But if you follow the link above you will see that there is a Release file.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;adding a repository via terminal results in this message, no matter what user/ppa I try to add: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Cannot add PPA: 'ppa:~teejee2008/ubuntu/ppa'.&#xA;ERROR: '~teejee2008' user or team does not exist.&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;git pull origin master&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;fatal: unable to access 'https://path-to-repository.git/': server certificate verification failed. CAfile: /etc/ssl/certs/ca-certificates.crt CRLfile: none&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;A workaround here is to set &lt;code&gt;export GIT_SSL_NO_VERIFY=1&lt;/code&gt;, but it is not a nice solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because the certificates I have already installed are not necessary anymore, is it possible to revert the certificate system to default without reinstalling the elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="84" LastEditDate="2018-01-23T11:41:37.147" LastActivityDate="2018-01-23T11:41:37.147" Title="ppa/git problems after installing certificates. Revert system to default?" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14255" PostTypeId="2" ParentId="11325" CreationDate="2017-12-26T13:57:12.217" Score="1" Body="&lt;p&gt;As a &lt;strong&gt;temporary fix&lt;/strong&gt; for your situation - you can just add the command to run automatically on startup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open up &lt;strong&gt;Settings&lt;/strong&gt; -&gt; &lt;strong&gt;Applications&lt;/strong&gt; -&gt; &lt;strong&gt;Startup&lt;/strong&gt; (tab)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the &lt;strong&gt;+ icon&lt;/strong&gt; in the bottom left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;type &lt;code&gt;bluetooth on&lt;/code&gt; in the custom command section.&lt;/p&gt;&#xA;" OwnerUserId="12580" LastActivityDate="2017-12-26T13:57:12.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14256" PostTypeId="2" ParentId="14123" CreationDate="2017-12-26T14:46:56.783" Score="0" Body="&lt;p&gt;&lt;strong&gt;Step 1&lt;/strong&gt;:  (Follow only for loopback DNS addresses)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disable &lt;strong&gt;dnsmasq&lt;/strong&gt; in &lt;strong&gt;/etc/NetworkManager/NetworkManager.conf&lt;/strong&gt; by comenting the line that contains &lt;strong&gt;dns=dnsmasq&lt;/strong&gt; with a hash symbol (#). Like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#dns=dnsmasq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the &lt;strong&gt;Network Settings&lt;/strong&gt; and in the connection of interest,&#xA;select &lt;strong&gt;Settings&lt;/strong&gt;...&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Navigate to the &lt;strong&gt;IPv4 Settings&lt;/strong&gt; tab and&#xA;there, select the option &lt;strong&gt;Automatic (DHCP) addresses only&lt;/strong&gt; from the&#xA;&lt;strong&gt;Method&lt;/strong&gt; field.  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Then, on the &lt;strong&gt;DNS servers&lt;/strong&gt; field, write the address of&#xA;the DNS to use. In this case &lt;strong&gt;127.0.0.1&lt;/strong&gt;.  &lt;/li&gt;&#xA;&lt;li&gt;Hit &lt;strong&gt;Save&lt;/strong&gt;.  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://vgy.me/Bp8kXw.png&quot; alt=&quot;Network Settings&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3&lt;/strong&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart the network manager service with the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notes: If you use remote DNS server addresses, like 8.8.8.8, you don't need to disable dnsmasq. You can skip to Step 2. Step 1 is only for when using loopback addresses, like with DNSCrypt.  &lt;/p&gt;&#xA;" OwnerUserId="9326" LastActivityDate="2017-12-26T14:46:56.783" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14258" PostTypeId="2" ParentId="12565" CreationDate="2017-12-27T01:22:28.107" Score="0" Body="&lt;p&gt;I am a noob but I have managed to print in eOS. I installed the application Synaptic Package Manager, then I looked online for the driver that my printer required, then I found them through the Synaptic Package Manager search and installed them (cups etc.)&#xA;You can search within Synaptic Package Manager for the name of your printer and it may come up. It could be the following (printer-driver-escpr)   &lt;/p&gt;&#xA;" OwnerUserId="13072" LastActivityDate="2017-12-27T01:22:28.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14261" PostTypeId="1" CreationDate="2017-12-27T03:41:47.437" Score="0" ViewCount="790" Body="&lt;p&gt;I am able to use keyboard shortcuts to take a screenshot of my entire screen (which automatically saves in the Pictures folder - side question how do I change where it saves?).&#xA;When I try to use the keyboard shortcut to take a screenshot of an area as per the other options in the System Settings--&gt;Keyboard--&gt;Shortcuts--&gt;Screenshots nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the a way to run the actual 'Take a screenshot' application using shortcuts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your help will be much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;Iri&lt;a href=&quot;https://i.stack.imgur.com/fvCEx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fvCEx.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13072" LastEditorUserId="13072" LastEditDate="2017-12-27T21:32:50.590" LastActivityDate="2018-02-26T17:56:31.410" Title="Screenshot of an Area Keyboard Shortcut" Tags="|keyboard-shortcuts|app-shortcuts|screenshot|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14262" PostTypeId="1" AcceptedAnswerId="14263" CreationDate="2017-12-27T06:40:31.540" Score="0" ViewCount="213" Body="&lt;p&gt;Can I as a programmer depend on elementary OS Loki instead of Windows 10?&#xA;Should I uninstall Windows 10 and use elementary OS Loki as my default OS for web &amp;amp; application programming?&lt;/p&gt;&#xA;" OwnerUserId="13158" LastEditorUserId="308" LastEditDate="2018-08-07T18:09:48.073" LastActivityDate="2018-08-07T18:09:48.073" Title="Can I as a programmer depend on elementary OS Loki instead of Windows 10 as single boot?" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ClosedDate="2017-12-31T18:52:35.023" ContentLicense="CC BY-SA 4.0" />
  <row Id="14263" PostTypeId="2" ParentId="14262" CreationDate="2017-12-27T08:22:07.773" Score="1" Body="&lt;p&gt;It depends on the tools you rely on and their dependencies. Elementary OS should be fine for web development as the tools you need will only be a few installs away. You also don't need to worry much about compatibility with Microsoft's native browsers like Edge and IE as Microsoft is generous enough to provide minimal VirtualBox images for free without the need for rebooting to a full Windows installation just to test a website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're using Node.js or similar cross-platform tools to build your applications, you can probably forgo Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to develop games or applications that needs to be also available natively on Windows, I suggest keeping the Windows 10 for compiling and testing your builds.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2017-12-27T08:22:07.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14264" PostTypeId="2" ParentId="14254" CreationDate="2017-12-27T12:15:38.283" Score="3" Body="&lt;p&gt;The problem comes after installing some certificates, and did not resolve when I removed them, not even using &lt;code&gt;sudo apt-get install --reinstall ca-certificates&lt;/code&gt; or &lt;code&gt;sudo dpkg-reconfigure ca-certificates&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution I found was to completely remove the &lt;code&gt;ca-certificates&lt;/code&gt; package and install it again, instead of using &lt;code&gt;--reinstall&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge ca-certificates&#xA;sudo apt autoremove&#xA;sudo apt install ca-certificates&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and because the &lt;code&gt;autoremove&lt;/code&gt; removed &lt;code&gt;software-properties-common&lt;/code&gt;, I have to install it again by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After these steps I can add repositories, use &lt;code&gt;git pull&lt;/code&gt; and &lt;code&gt;sudo apt update&lt;/code&gt; without any problems.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="84" LastEditDate="2018-01-22T19:57:31.170" LastActivityDate="2018-01-22T19:57:31.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14266" PostTypeId="2" ParentId="14200" CreationDate="2017-12-28T12:39:35.453" Score="1" Body="&lt;p&gt;Looking in the &lt;a href=&quot;https://github.com/elementary/music&quot; rel=&quot;nofollow noreferrer&quot;&gt;code of Noise/Music&lt;/a&gt;, there is no functionality to handle command line inputs beside of the filename as an argument.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2017-12-28T12:39:35.453" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14267" PostTypeId="1" CreationDate="2017-12-28T12:42:59.300" Score="0" ViewCount="284" Body="&lt;p&gt;After I installed Elementary OS with dual boot (also have Win 10), whenever I try to boot Elementary a message appears saying NTFS5 : no eosldr and then this:&lt;a href=&quot;https://i.stack.imgur.com/vEjjo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vEjjo.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need some help!&lt;/p&gt;&#xA;" OwnerUserId="13162" LastActivityDate="2024-04-03T17:01:55.220" Title="Problem when I try to boot Elementary OS" Tags="|grub|bash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14268" PostTypeId="2" ParentId="14261" CreationDate="2017-12-28T17:07:28.550" Score="1" Body="&lt;p&gt;Go to your Terminal and with the command &lt;code&gt;screenshot-tool --help&lt;/code&gt; you can see all the available options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can define your personal Keyboard-Shortcut in &lt;em&gt;Switchboard &gt; Keyboard &gt; Custom ...&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know how i can set a specified destination but for me, with the following shortcuts, screenshot-tool saves automatically in &lt;em&gt;~/Pictures/Screenshots&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vkj18.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vkj18.png&quot; alt=&quot;Picture is from german language &amp;#39;Benutzerdefiniert = Custom&amp;#39;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6165" LastActivityDate="2017-12-28T17:07:28.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14270" PostTypeId="1" CreationDate="2017-12-28T23:15:58.540" Score="0" ViewCount="277" Body="&lt;p&gt;I used ubuntu before where the alexa connects as a speaker and plays audio from the computer.  Now I have elementary OS and the alexa connects as a microphone with no option to play sound.  I have tried &quot;forgetting&quot; and adding the alexa many times it always shows up as a microphone.  How do I make the alexa show up as a bluetooth speaker the way it has worked on ubuntu and osx?&lt;/p&gt;&#xA;" OwnerUserId="13164" LastActivityDate="2018-02-01T16:11:06.380" Title="alexa speaker only shows up as a microphone and not a bluetooth speaker" Tags="|sound|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14272" PostTypeId="1" CreationDate="2017-12-29T00:11:43.820" Score="0" ViewCount="143" Body="&lt;p&gt;I successfully installed Windows 10 Pro on an external SSD connected to a USB3 port. This was done using WintoUSB software that mimics Windows to Go.  I could then connect the drive to either of two PCs and boot from it.  I then installed Elementary OS Loki onto the same drive.  To do so I created three partitions in the unused space after the Windows NTFS partition. On installation I chose &quot;Something Else&quot; and made the three partitions I had created into &quot;Root&quot; &quot;Linux Swap&quot; and &quot;Home&quot; partitions and completed the installation.&#xA;On booting up the computer after installation the Grub screen appeared with only two options, to boot into Elementary, or Elementary advanced options, and with no option to boot into Windows.  Windows is still all there on the drive.  I can see it by plugging the drive into a Windows PC, but I just cannot boot into it.  What Have I done wrong?  Can it be fixed, or do I have to start again?&lt;/p&gt;&#xA;" OwnerUserId="12846" LastActivityDate="2018-05-18T04:28:25.520" Title="Dual boot with Windows 10 on external drive not working" Tags="|release-loki|dual-boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14274" PostTypeId="1" AcceptedAnswerId="14280" CreationDate="2017-12-29T08:54:03.230" Score="1" ViewCount="546" Body="&lt;p&gt;My elementary OS calendar syncs oneway with my Google calendar. Let me explain:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I add an event in the elementary OS calendar it appears in my Google calendar.&#xA;If I add an event in my Gogle calendar nothing appears in my elementary OS calendar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone else get this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="13072" LastEditorUserId="27819" LastEditDate="2022-03-20T21:41:33.973" LastActivityDate="2022-03-20T21:41:33.973" Title="elementary OS Calendar syncs oneway only with Google Calendar" Tags="|release-odin|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14275" PostTypeId="2" ParentId="14270" CreationDate="2017-12-29T11:27:49.743" Score="1" Body="&lt;p&gt;First, update your system. This steps probably won't work if you are not using Loki (elementary OS 0.4).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bluetooth is buggy sometimes. Delete alexa from the Bluetooth settings inside System Settings and reboot your computer. Go back again to the settings menu and press &lt;code&gt;+&lt;/code&gt; to add a new bt device.&lt;br&gt;&#xA;Now turn on BT on Alexa. When it appears on the menu you've just opened, click on it and accept all windows on both devices until it connects. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it should work automatically.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There's a thing called bluetooth profiles for audio. You have A2DP for high quality audio and HSP/HFP for mono audio and microphone.&lt;br&gt;&#xA;Basically when you want to use the mic you have to switch to the HSP/HFP profile (you can do it from an option inside Sound Settings). But since Bluetooth is broken in linux, when you want to switch back to the A2DP profile it won't work most of the time.&lt;br&gt;&#xA;So I recommend you to just use Alexa as a speaker or as a mic so you don't have that problem. Or follow this guide every time you want to switch back to the A2DP profile, it's up to you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This bluetooth bug is a upstream issue and it will take a while to fix. It has nothing to do with elementary so please be patient :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2018-01-02T14:34:49.913" LastActivityDate="2018-01-02T14:34:49.913" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14276" PostTypeId="1" AcceptedAnswerId="14281" CreationDate="2017-12-29T11:56:28.567" Score="2" ViewCount="4393" Body="&lt;p&gt;I'm trying to let a script send a couple of notifications with custom &lt;code&gt;png&lt;/code&gt;s as icons. This could be easily put off as a duplicate of &lt;a href=&quot;https://askubuntu.com/a/351637/329400&quot;&gt;https://askubuntu.com/a/351637/329400&lt;/a&gt;, but it isn't. In fact, I tried this exact solution, but the icon didn't display:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;notify-send -i /usr/share/icons/gnome/32x32/status/stock_lock-broken.png  summary test&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/r05HJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r05HJ.png&quot; alt=&quot;notify-send -i /usr/share/icons/gnome/32x32/status/stock_lock-broken.png  summary test&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also made sure the image really exists in elementaryOS. It does:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdg-open /usr/share/icons/gnome/32x32/status/stock_lock-broken.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cCbaq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cCbaq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happened?&lt;/p&gt;&#xA;" OwnerUserId="8580" LastActivityDate="2021-08-10T21:14:10.520" Title="notify-send icon: custom png" Tags="|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14277" PostTypeId="1" AcceptedAnswerId="14282" CreationDate="2017-12-29T16:26:16.157" Score="0" ViewCount="79" Body="&lt;p&gt;How can I edit and manage my login credentials I entered to connect to sftp, ssh servers using the default ELementaryOS File Explorer&lt;/p&gt;&#xA;" OwnerUserId="13128" LastActivityDate="2017-12-30T12:48:01.587" Title="How to manage logins, and cash information of &quot;Connect to Server&quot; in ElementaryOS?" Tags="|pantheon-files|ssh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14279" PostTypeId="1" CreationDate="2017-12-29T21:10:25.977" Score="0" ViewCount="138" Body="&lt;p&gt;I'm obviously missing something, but when I select an ebook, it opens in BookWorm. But when I want to select it to be deleted, it just opens the ebook: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Left click on ebook just opens it.&lt;/li&gt;&#xA;&lt;li&gt;Clicking on the &lt;code&gt;-&lt;/code&gt; button and then on the ebook also opens it.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Clearly not one of my brighter moments - is this a bug or am I just in need of coffee? :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a GIF of what I'm doing (click for full-size):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://giphy.com/gifs/l0HUnSIcZfLttokBa/fullscreen&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nXTsp.gif&quot; alt=&quot;animated screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13173" LastEditorUserId="84" LastEditDate="2018-01-29T10:17:47.710" LastActivityDate="2018-08-22T15:58:12.223" Title="Not able to delete PDF ebook in BookWorm" Tags="|applications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14280" PostTypeId="2" ParentId="14274" CreationDate="2017-12-29T21:15:08.243" Score="1" Body="&lt;p&gt;My guess is that the calendar is not setup for real time syncing. Have you tried rebooting and then re-checking the calendar to see if it shows up?&lt;/p&gt;&#xA;" OwnerUserId="13173" LastActivityDate="2017-12-29T21:15:08.243" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14281" PostTypeId="2" ParentId="14276" CreationDate="2017-12-30T09:52:46.297" Score="4" Body="&lt;p&gt;I wrote a bunch of bash scripts a while ago, and struggled with this issue as well. This is what I have going now, and it works:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZPkLv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZPkLv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This icon is located in ~/.local/share/icons. In this case it's a .svg file, but it will also work with other types:&#xA; &lt;a href=&quot;https://i.stack.imgur.com/wrS2t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wrS2t.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;This is a python example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MUXWr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MUXWr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And these are the results:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qeRBN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qeRBN.png&quot; alt=&quot;bash notification&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4nBZ5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4nBZ5.png&quot; alt=&quot;python notification&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general idea is to put the icon file in the icons folder, maybe also reload the icon cache, and refer to that image in you commands by its name (using the full path will not work), without the extension.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, your command should look like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;notify-send -i stock_lock-broken  summary test&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vviKI.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vviKI.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2017-12-30T10:40:14.227" LastActivityDate="2017-12-30T10:40:14.227" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14282" PostTypeId="2" ParentId="14277" CreationDate="2017-12-30T12:48:01.587" Score="0" Body="&lt;p&gt;There is no in built facility to do this securely at present. But the answer to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13770/save-ssh-connection-pantheon-files?rq=1&quot;&gt;Save ssh connection pantheon-files&lt;/a&gt; shows how to use bookmarks to make reconnection more convenient.  Note using this method the user name and address of the server are not encrypted although the password is stored securely by the system.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2017-12-30T12:48:01.587" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14283" PostTypeId="1" AcceptedAnswerId="14284" CreationDate="2017-12-30T14:37:49.193" Score="0" ViewCount="54" Body="&lt;p&gt;i have a assignment from my school for a remastering project.&#xA;so i need to change all elementary os branding.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how can i change &quot;elementary OS 0.4.1 Loki&quot; text on &lt;strong&gt;System Setting -&gt; About&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i have searched on google but still no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="13176" LastActivityDate="2017-12-30T14:57:04.140" Title="How to change elementary OS branding?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14284" PostTypeId="2" ParentId="14283" CreationDate="2017-12-30T14:57:04.140" Score="1" Body="&lt;p&gt;You could check the source code of the &lt;a href=&quot;https://github.com/elementary/switchboard-plug-about&quot; rel=&quot;nofollow noreferrer&quot;&gt;About plug&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-about/blob/master/src/Plug.vala#L75-L100&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-about/blob/master/src/Plug.vala#L75-L100&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-about/blob/master/src/Plug.vala#L146-L151&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-about/blob/master/src/Plug.vala#L146-L151&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Looks like it's retrieved from the &quot;PRETTY_NAME&quot; variable from the &lt;code&gt;/etc/os-release&lt;/code&gt; file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does that help you? &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2017-12-30T14:57:04.140" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14286" PostTypeId="1" CreationDate="2017-12-30T20:52:44.223" Score="0" ViewCount="222" Body="&lt;p&gt;When the background wallpaper is white, native wingpanel icons are black and when a window is maximized the icons are white because the background becomes black except with third party icons like deluge or dropbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried debugging to see how these icons become from black to white to try to fix with third party icons but I didn't see how.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody give me a solution to fix this issue? Is a theme or icon theme issue? Is it possible to fix the issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need a clue please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KzNg1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KzNg1.png&quot; alt=&quot;Third party icons are white with the icon theme&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9vzEQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9vzEQ.png&quot; alt=&quot;Third party icons don&amp;#39;t change&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="13180" LastActivityDate="2018-03-01T19:15:03.490" Title="Wingpanel, adapt third party icons to background color" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14289" PostTypeId="2" ParentId="14286" CreationDate="2017-12-31T18:55:54.683" Score="1" Body="&lt;p&gt;This relies on a feature of Gtk+ that automatically colors icons ending in &lt;code&gt;-symbolic&lt;/code&gt;. The applications in question would have to use this namespace in order to implement this feature, so it is a bug in those applications.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-12-31T18:55:54.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14290" PostTypeId="2" ParentId="14279" CreationDate="2017-12-31T18:58:55.280" Score="2" Body="&lt;p&gt;Since this is a 3rd party app and not an app that elementary develops, you probably should open an issue report in &lt;a href=&quot;https://github.com/babluboy/bookworm/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bookworm's tracker&lt;/a&gt; since it looks like &lt;a href=&quot;https://github.com/babluboy/bookworm/wiki&quot; rel=&quot;nofollow noreferrer&quot;&gt;their wiki&lt;/a&gt; is empty.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2017-12-31T18:58:55.280" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14291" PostTypeId="2" ParentId="12158" CreationDate="2018-01-01T03:52:46.923" Score="0" Body="&lt;p&gt;Although OP solved via re-install, I also had the same issue and was able to solve it another way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems I had installed libpng16-dev which caused these same dependency issues. After removing it and installing libpng&lt;strong&gt;12&lt;/strong&gt;-dev instead, I was able to install elementary-sdk succesfully.&lt;/p&gt;&#xA;" OwnerUserId="13186" LastActivityDate="2018-01-01T03:52:46.923" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14292" PostTypeId="2" ParentId="14228" CreationDate="2018-01-01T10:00:17.697" Score="0" Body="&lt;p&gt;You should resize &lt;code&gt;/dev/sda3&lt;/code&gt; (the extended partition) first and you root filesystem &lt;code&gt;/dev/sda6&lt;/code&gt; after. You might need to do it from a boot cd / usb live system.&lt;/p&gt;&#xA;" OwnerUserId="578" LastActivityDate="2018-01-01T10:00:17.697" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14293" PostTypeId="1" AcceptedAnswerId="14294" CreationDate="2018-01-01T11:32:18.697" Score="0" ViewCount="3713" Body="&lt;p&gt;I have recently installed some new apps from appcenter. For example &quot;Go Fot It!&quot;. I don't know how to run this app without searching it in appcenter. Firstly, is there something like &quot;my apps&quot; or something else to run installed apps? Secondly, I want to run some of them from the terminal. Then how can I know the names of the executable files?&lt;/p&gt;&#xA;" OwnerUserId="13190" LastActivityDate="2018-01-01T11:47:13.433" Title="Where is appcenter applications location?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14294" PostTypeId="2" ParentId="14293" CreationDate="2018-01-01T11:47:13.433" Score="0" Body="&lt;p&gt;Such applications should add a .desktop file so that you can open them from the Applications menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The application &quot;Go For It!&quot; does seem to appear in my Applications menu. It added a &lt;code&gt;/usr/share/applications/com.github.jmoerman.go-for-it.desktop&lt;/code&gt; file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking at that item with the AppEditor (an easy way to inspect / edit .desktop files) it shows that it opens &lt;code&gt;com.github.jmoerman.go-for-it&lt;/code&gt;. Which makes sense since that naming scheme is a requirement for adding applications to the AppCenter. See: &lt;a href=&quot;https://elementary.io/docs/code/getting-started#the-desktop-file&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/getting-started#the-desktop-file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;code&gt;whereis com.github.jmoerman.go-for-it&lt;/code&gt; tells me it's located in &lt;code&gt;/usr/bin/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There isn't really one applications folder in linux, but when you try to execute an application it looks for that application in the folders listed in the PATH environment variable. See: &lt;code&gt;echo $PATH&lt;/code&gt; (separated by &lt;code&gt;:&lt;/code&gt;'s).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know whether the applications you install from the AppCenter will always be installed in the same folder. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-01T11:47:13.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14297" PostTypeId="2" ParentId="14267" CreationDate="2018-01-01T19:46:06.973" Score="0" Body="&lt;p&gt;Have you got windows 10 fast shutdown enabled?&#xA;To disable this, follow these steps (in Windows 10):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Search for and open “Power options” in the Start Menu.&#xA;Click “Choose what the power buttons do” on the left side of the window.&#xA;Click “Change settings that are currently unavailable.”&#xA;Under “Shutdown settings” make sure “Turn on fast startup” is disabled.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work&#xA;can you get into the command prompt from grub menu - elementary advanced settings? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /etc/fstab - what does it show?&#xA;try editing with nano and comment out all file systems except the one that elementary is on and reboot. &lt;/p&gt;&#xA;" OwnerUserId="10117" LastActivityDate="2018-01-01T19:46:06.973" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14300" PostTypeId="1" CreationDate="2018-01-01T22:21:34.663" Score="1" ViewCount="204" Body="&lt;p&gt;first of all, happy new year. I'm a newbie of GNU/Linux world, Elementary OS is my first distro. &#xA;I have a little problem with Telegram desktop: it works fine, but in the Applications Menu two instances of Telegram are displayed. I attach a screenshot to explain better:&lt;a href=&quot;https://i.stack.imgur.com/1ToXP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1ToXP.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed Telegram from PPA, as showed &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12096/installing-configuring-telegram&quot;&gt;here&lt;/a&gt;. I've tried several times to remove/purge and then reinstall the package, with no result. Did it happen to anyone? Thanks for any reply.&lt;/p&gt;&#xA;" OwnerUserId="13198" LastActivityDate="2018-01-01T22:21:34.663" Title="Telegram displayed two times" Tags="|applications|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14301" PostTypeId="1" CreationDate="2018-01-02T04:00:36.070" Score="0" ViewCount="34" Body="&lt;p&gt;On Ubuntu, if i set my home folder permissions to 700, the login screen can't access my wallpaper so it always display the default one.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Elementary OS, even if my home folder permission is set to 700, the wallpaper is shown on the login screen.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed that if i change the permissions on the wallpaper file to just be accessed by the user this doesn't happen anymore.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does it make a copy of the wallpaper to anywhere else than ~/.local/share/backgrounds/ ?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry if is not a serious issue, but I'm just curious how it works.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2018-03-03T21:35:47.383" Title="How does The login sceen knows my custom wallpaper if i have my home folder permission to 700?" Tags="|release-loki|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14303" PostTypeId="1" CreationDate="2018-01-02T10:41:32.657" Score="1" ViewCount="675" Body="&lt;p&gt;I use a Bluetooth mouse, it work fine. After reboot it connects automatic. After suspend it doesn't connect. If I try to do it manually I get this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Connection Failed: blueman.bluez.errors.DBusNotReadyError: Resource Not Ready...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Waiting didn't solve the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am a new user and I have tried the solutions I found here (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9351/can-i-get-bluetooth-devices-to-remain-after-suspend-resume-and-or-reboot&quot;&gt;Can I get bluetooth devices to remain after suspend/resume and/or reboot&lt;/a&gt;) but it didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help, thank you.&lt;/p&gt;&#xA;" OwnerUserId="13183" LastActivityDate="2019-08-26T05:01:45.180" Title="Bluetooth error after suspend" Tags="|bluetooth|suspend|" AnswerCount="1" CommentCount="0" ClosedDate="2019-08-26T16:09:02.407" ContentLicense="CC BY-SA 3.0" />
  <row Id="14304" PostTypeId="2" ParentId="14303" CreationDate="2018-01-02T11:26:09.683" Score="0" Body="&lt;p&gt;SOLVED:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the /etc/bluetooth/main.conf file. There you'll find settings for bluetooth. I see that the last line is about AutoEnable, change it to true.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:)&#xA;shareimprove this answer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;answered Jan 7 '17 at 9:53&#xA;Dysproz&#xA;7681215&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10036/bluetooth-turns-off-after-reboot?rq=1&quot;&gt;Bluetooth turns off after reboot&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13183" LastActivityDate="2018-01-02T11:26:09.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14305" PostTypeId="1" CreationDate="2018-01-02T12:26:48.510" Score="0" ViewCount="152" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VFjf4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VFjf4.png&quot; alt=&quot;Screenshot that shows that an executable is not &amp;quot;seen&amp;quot; by the system&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using Loki 0.4.1 on a 64-bit machine.&#xA;When I try to open an executable, or use a shell script that opens it, the system responds by saying that the given file does not exist. However, the output of &lt;code&gt;ls&lt;/code&gt; and &lt;code&gt;file --mime-type&lt;/code&gt;shows that the file is there. This has happened several times with different executables.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this? I have tried editing the permissions, but it didn't help...&lt;/p&gt;&#xA;" OwnerUserId="13200" LastActivityDate="2021-12-15T00:06:45.553" Title="OS ignoring executable files" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14306" PostTypeId="2" ParentId="14305" CreationDate="2018-01-02T14:03:10.540" Score="1" Body="&lt;p&gt;You're sure it has execution rights? (using &lt;code&gt;ls -l&lt;/code&gt; would give more information). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$sudo chmod +x wine&lt;/code&gt; should give the file execution rights. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-02T14:03:10.540" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14307" PostTypeId="2" ParentId="14301" CreationDate="2018-01-02T14:21:08.510" Score="1" Body="&lt;p&gt;The answear is that it makes a copy with the same permissions in the root folder /var/lib/lightdm-data/.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way no matter what your home folder permissions are you will always have the choice to show or not your wallpaper on the login screen by giving the wallpaper file read permissions to others.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastActivityDate="2018-01-02T14:21:08.510" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14308" PostTypeId="1" CreationDate="2018-01-02T16:50:24.923" Score="0" ViewCount="78" Body="&lt;p&gt;Apologies if this is more appropriate for the subreddit, but my question felt supportish.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, I just stumbled across elementary (mac user since I was like 7) and decided to give it a shot last night. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Really liking it so far, but I woke up this morning to a noisy desktop background image: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/1ejyh.jpg&quot; alt=&quot;Noisy desktop bg&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I toggled the desktop image, which fixed the bg image besides a few pixels in each corner and the multitasking background:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/fU9BB.jpg&quot; alt=&quot;Screenshot: errors in corner pixels&quot;&gt;&#xA;&lt;img src=&quot;https://i.stack.imgur.com/c3SeT.jpg&quot; alt=&quot;Screenshot: error in multitasking background&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basic environment info:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS 0.4.1 Loki&lt;/li&gt;&#xA;&lt;li&gt;Dual booting on a 2012 iMac&lt;/li&gt;&#xA;&lt;li&gt;Quad-Core Intel Core i7-3770S CPU @ 3.10GHz&lt;/li&gt;&#xA;&lt;li&gt;NVIDIA Corporation&#xA;GK107M [GeForce GT 650M Mac Edition] (rev a1)&lt;/li&gt;&#xA;&lt;li&gt;I'm using the&#xA;nvidia-384 driver available through AppCenter.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="13201" LastEditorUserId="84" LastEditDate="2018-02-09T23:39:27.693" LastActivityDate="2018-02-09T23:39:27.693" Title="Any ideas as to why my Desktop and Multitasking backgrounds are rendering funny?" Tags="|release-loki|display|nvidia|macintosh|" AnswerCount="1" CommentCount="0" ClosedDate="2018-02-12T09:56:18.463" ContentLicense="CC BY-SA 3.0" />
  <row Id="14309" PostTypeId="2" ParentId="10726" CreationDate="2018-01-03T05:42:16.793" Score="0" Body="&lt;p&gt;One of the easy ways to do this is to check that on &lt;strong&gt;right clicking the icon a sub menu should appear with the option to &lt;em&gt;run or open the application as administrator&lt;/em&gt;&lt;/strong&gt;. This should take care of those locked folders and files. Currently &lt;em&gt;I am using Elementary OS Loki (64-bit, intel) which is a derivative of Ubuntu 16.04&lt;/em&gt;. I hope this should work.&lt;/p&gt;&#xA;" OwnerUserId="13205" LastActivityDate="2018-01-03T05:42:16.793" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14310" PostTypeId="1" AcceptedAnswerId="14330" CreationDate="2018-01-03T07:17:33.723" Score="0" ViewCount="372" Body="&lt;p&gt;I am having a trouble whenever I want to install a new package or run &lt;code&gt;sudo apt-get update&lt;/code&gt; with the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://packages.elementary.io/appcenter xenial Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://packages.elementary.io/appcenter/dists/xenial/main/binary-i386/Packages  403  Forbidden [IP: 104.28.5.44 80]&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot of my software packages &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/c7fAX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c7fAX.jpg&quot; alt=&quot;packages list&quot;&gt;&lt;/a&gt;&#xA;So, how can I fix this problem and get the broken messages repaired?&lt;/p&gt;&#xA;" OwnerUserId="13128" LastEditorUserId="13128" LastEditDate="2018-01-03T07:27:46.853" LastActivityDate="2018-01-05T07:57:43.123" Title="ElementaryOS broken packages" Tags="|release-loki|updates|ppa|" AnswerCount="1" CommentCount="1" ClosedDate="2018-01-29T10:18:15.443" ContentLicense="CC BY-SA 3.0" />
  <row Id="14311" PostTypeId="2" ParentId="12987" CreationDate="2018-01-03T10:49:19.010" Score="2" Body="&lt;p&gt;Same problem with me, Nvidia GeForce GTX 1050, using the latest 384.98 Nvidia Driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem disappears if I switch the driver to use the &quot;Power Saving Mode&quot; which disables the Nvidia GPU and uses the Intel one instead - the return from suspend is much faster and there are no visual defects like the ones on the picture above. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like a problem with the driver.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-03T10:49:19.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14313" PostTypeId="1" AcceptedAnswerId="14317" CreationDate="2018-01-03T18:33:55.940" Score="0" ViewCount="40" Body="&lt;p&gt;Vala newbie here. Learning Vala as programming language and stuck with following program&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;int main() {&#xA;    string first_name;&#xA;    string last_name;&#xA;    uint age;&#xA;&#xA;    stdout.printf(&quot;Enter your first name: &quot;);&#xA;    first_name = stdin.read_line();&#xA;&#xA;    stdout.printf(&quot;Enter your last name: &quot;);&#xA;    last_name = stdin.read_line();&#xA;&#xA;    stdout.printf(&quot;Enter your age: &quot;);&#xA;    age = stdin.scanf(&quot;%u&quot;, out age);&#xA;&#xA;    stdout.printf(&quot;Hi! %s %s. You are %u years old.\n&quot;, first_name, last_name, age);&#xA;&#xA;    return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This program is working fine except the value of &lt;code&gt;%u&lt;/code&gt; or age. Whatever value that I entered, it always printing &lt;code&gt;1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank You in Advance.&lt;/p&gt;&#xA;" OwnerUserId="12903" LastActivityDate="2018-01-04T01:04:51.913" Title="Can not able to get exact value of `%u` in Vala program" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14314" PostTypeId="2" ParentId="10726" CreationDate="2018-01-03T18:40:51.580" Score="0" Body="&lt;p&gt;I was facing same problem before, but now it is working.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Have you placed shortcut of other applications in dock? If so, then can you remove one at a time and check if it is working?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also first try to login with guest account and then go over your account.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="12903" LastActivityDate="2018-01-03T18:40:51.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14316" PostTypeId="1" CreationDate="2018-01-03T21:34:24.027" Score="0" ViewCount="55" Body="&lt;p&gt;I'm sorry to bother you, but I think I've just made a huge mistake. I was trying to install TexLive on my Elementary OS distro. I was following this guide (italian, unfortunately): &lt;a href=&quot;http://profs.sci.univr.it/~gregorio/texlive-YEAR-ubuntu.pdf&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the chapter 7, there was this sequence of commands&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ echo 'export PATH=/opt/texbin:${PATH}' &gt; texlive.sh &#xA;$ sudo cp texlive.sh /etc/profile.d/ &#xA;$ sudo mkdir -p /opt &#xA;$ sudo ln -s /usr/local/texlive/2012/bin/x86_64-linux /opt/texbin &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not so sure, but I think that I've wrongly written also another command: $ sudo rm /opt/texbin (in the guide it's reported some lines later, talking about updating TexLive), and then, as it's writtend, I logged out. &#xA;But after this, I'm stucked in the login: when I enter my username and password, it gets a black screen for a moment and then it come back to login screen. &#xA;I've tried to type CTL+ALT+F1, then after my username and password&#xA;, any command is not executed: it appears an error like &quot;command 'sudo' is available in 'usr/bin/sudo'. The command can't be located because '/usr/bin' is not included in the PATH environment variable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this? :(&lt;/p&gt;&#xA;" OwnerUserId="13198" LastActivityDate="2018-02-04T07:31:55.790" Title="Can't login after a PATH modification" Tags="|release-loki|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14317" PostTypeId="2" ParentId="14313" CreationDate="2018-01-04T01:04:51.913" Score="1" Body="&lt;p&gt;You're assigning the return value to &lt;code&gt;age&lt;/code&gt;. The return value for &lt;code&gt;scanf&lt;/code&gt; is documented as:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;On  success,  these functions return the number of input items successfully matched and assigned; this can be fewer than provided for, or even zero, in the event of an early matching failure.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Since you're attempting to read 1 value, if the input is read successfully the return value will be 1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try something like&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;if (stdin.scanf(&quot;%u&quot;, out age) &amp;lt; 1)&#xA;  GLib.error(&quot;Unable to parse age&quot;);&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2018-01-04T01:04:51.913" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14321" PostTypeId="2" ParentId="4463" CreationDate="2018-01-04T19:16:35.897" Score="1" Body="&lt;p&gt;After lots and lots of digging, I found the answer — for me, at least! I hope this helps someone else who became addicted to the ease of use brought by combining Mac OS's Exposé and a five-buttoned mouse...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firstly, I set up &lt;code&gt;xbindkeys&lt;/code&gt; using the information here: &lt;a href=&quot;https://askubuntu.com/a/246849/777016&quot;&gt;https://askubuntu.com/a/246849/777016&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically, I ran:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xbindkeys xautomation x11-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I used &lt;code&gt;xev | grep -A2 ButtonPress&lt;/code&gt; to figure out that my middle (mouse-wheel) button was button number 2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I created the xbindkeys config file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys --defaults &amp;gt; $HOME/.xbindkeysrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I edited the file &lt;code&gt;$HOME/.xbindkeysrc&lt;/code&gt; using nano, to add the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1&quot;&#xA;b:2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll need to log out and then log back in for the changes to take effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The number after &lt;code&gt;b:&lt;/code&gt; is the mouse button number as reported by &lt;code&gt;xev&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got the command to invoke multitasking view from this answer: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/11766/13212&quot;&gt;https://elementaryos.stackexchange.com/a/11766/13212&lt;/a&gt; — it wasn't exactly what I wanted, as I'd prefer &quot;show all windows&quot; to &quot;multitasking view&quot; but it's near enough. If anyone knows the commands to invoke other windowing features, please let me know!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also add those lines a second time but with &lt;code&gt;+ Release&lt;/code&gt; on the end, if you want to be able to hold the button down and have the view revert on release. Sadly, to change windows you must click on it with the left button — you can't hold then release the middle button over the window you want, like with Mac OS's Exposé.&lt;/p&gt;&#xA;" OwnerUserId="13212" LastActivityDate="2018-01-04T19:16:35.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14322" PostTypeId="1" AcceptedAnswerId="14325" CreationDate="2018-01-04T19:29:07.663" Score="0" ViewCount="93" Body="&lt;p&gt;Is it possible to set the icon for an application, both in the dock and in the Applications launcher, to execute a command?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to be able to launch Kodi with the LIRC support for a specific remote at the same time. I can do this from terminal with the command &quot;/usr/bin/kodi --lircdev /var/run/lirc/lircd&quot;, which I've also set as a custom command to run at startup. However if I click on the Kodi icon from dock or applications, it doesn't support the remote. So I'm just looking for a way to alter the icon to send that command signal, instead of just launching Kodi on its own.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried pinning to dock the instance of Kodi that launches on startup, but it still just launches standard Kodi.&lt;/p&gt;&#xA;" OwnerUserId="13214" LastActivityDate="2018-01-04T20:24:25.287" Title="Alter application icon to execute command?" Tags="|launcher|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14323" PostTypeId="1" CreationDate="2018-01-04T19:45:19.183" Score="0" ViewCount="125" Body="&lt;p&gt;In other OSes, I've used CTRL+W (or COMMAND+W on Mac OS) to close the current tab in Firefox and other web browsers. Of course, if there is only one tab open, then the window is closed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But in Elementary OS, that keyboard shortcut tries to close the window, regardless of how many tabs are open. I'm currently having to use the mouse to close tabs, which is a pain!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="13212" LastActivityDate="2018-01-04T20:23:10.333" Title="Keyboard shortcut for &quot;close tab&quot; in Firefox" Tags="|keyboard-shortcuts|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14324" PostTypeId="2" ParentId="14323" CreationDate="2018-01-04T20:23:10.333" Score="1" Body="&lt;p&gt;Are you sure you didn't customize anything? I've always been using ctrl+w. I can use it in Firefox, Chromium and Epiphany. &#xA;Maybe try a fresh install in a virtual machine to compare. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-04T20:23:10.333" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14325" PostTypeId="2" ParentId="14322" CreationDate="2018-01-04T20:24:25.287" Score="0" Body="&lt;p&gt;I would try using AppEditor to alter or add a .desktop file. Those desktop files control what you see for example in the Applications menu. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-04T20:24:25.287" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14328" PostTypeId="2" ParentId="9962" CreationDate="2018-01-04T22:32:23.233" Score="0" Body="&lt;p&gt;This works for me - I have replaced the directories with symbolic links to the new locations, manually edited the &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; file in order to return the settings back to the default, because after reboot the system do not recognized the symbolic links and point them to the $HOME into the .dirs file and once I set &lt;code&gt;enabled=False&lt;/code&gt; into the &lt;code&gt;/etc/xdg/user-dirs.conf&lt;/code&gt; they remain unchanged after reboot, so the icons and locations are ok.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2018-01-04T22:51:08.940" LastActivityDate="2018-01-04T22:51:08.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14330" PostTypeId="2" ParentId="14310" CreationDate="2018-01-05T07:57:43.123" Score="0" Body="&lt;p&gt;I had a similar problem, I did a research and found 2 possible reasons - &#xA;mis-configured proxy and certificates problem. In my case the reason was certificates mess, my resolution you can see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14254/ppa-git-problems-after-installing-certificates-revert-system-to-default&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-05T07:57:43.123" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14331" PostTypeId="2" ParentId="14308" CreationDate="2018-01-05T08:13:37.460" Score="0" Body="&lt;p&gt;Similar problem comes to me every time when my computer returns from suspend. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot say that it is a nice solution, but I found that there's no problem if I switch to the Intel GPU(Power Saving Mode) from the NVIDIA X Server Settings app. &lt;a href=&quot;https://i.stack.imgur.com/oBxXH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oBxXH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-05T08:13:37.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14333" PostTypeId="2" ParentId="7577" CreationDate="2018-01-05T15:48:15.487" Score="0" Body="&lt;p&gt;&lt;code&gt;system-config-samba&lt;/code&gt; is not installed. Run &lt;code&gt;sudo apt install system-config-samba&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13223" LastEditorUserId="26" LastEditDate="2018-02-21T10:54:27.847" LastActivityDate="2018-02-21T10:54:27.847" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14335" PostTypeId="1" CreationDate="2018-01-05T21:52:15.747" Score="3" ViewCount="312" Body="&lt;p&gt;I'm enjoying new install of elementary OS Loki. BUT, I need to access photos from an iPhone. I am connecting the iPhone using a USB 3.0 port in the back of a NUC. When I click &quot;Trust this computer&quot; on the phone, there is an icon for the iPhone under devices, but when I click on it, it says This Folder is Empty. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw someone else asked the same question in May but no answer yet, so I'm asking it again in hopes someone sees this who has a fix. Or is it not possible to access photos from an iPhone using elementary? I hate Windows and do not want to go back just for this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any guidance!&lt;/p&gt;&#xA;" OwnerUserId="604" LastActivityDate="2020-09-22T01:06:40.637" Title="Loki not showing files from iPhone iOS 11.2.1" Tags="|usb-drive|disk-management|mount|photos|iphone|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14337" PostTypeId="1" AcceptedAnswerId="27915" CreationDate="2018-01-06T02:43:49.733" Score="3" ViewCount="5377" Body="&lt;p&gt;I'm on a MBP coming from OSX.  I'd like to switch Super and Ctrl in all scenarios.  I know it's very easy and requires installing nothing because I did it last night while trying out this distro, but now I can't find the like I had followed that explained how to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I switch Super and Ctrl permanently?&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2021-05-08T17:38:37.163" Title="How do I switch Super and Ctrl?" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14338" PostTypeId="2" ParentId="14337" CreationDate="2018-01-06T03:18:02.127" Score="3" Body="&lt;p&gt;&lt;code&gt;sudo nano /usr/share/X11/xkb/symbols/pc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Switch Control and Super, it'll look something like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...key &amp;lt;NMLK&amp;gt; {        [ Num_Lock              ]       };&#xA;&#xA;key &amp;lt;LFSH&amp;gt; {        [ Shift_L               ]       };&#xA;key &amp;lt;LCTL&amp;gt; {        [ Super_L               ]       };&#xA;key &amp;lt;LWIN&amp;gt; {        [ Control_L             ]       };&#xA;&#xA;key &amp;lt;RTSH&amp;gt; {        [ Shift_R               ]       };&#xA;key &amp;lt;RCTL&amp;gt; {        [ Super_R               ]       };&#xA;key &amp;lt;RWIN&amp;gt; {        [ Control_R             ]       };&#xA;key &amp;lt;MENU&amp;gt; {        [ Menu ..... &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Found it here &lt;a href=&quot;https://askubuntu.com/questions/131900/how-do-i-switch-the-command-key-and-control-key-on-a-macbook-pro#158014&quot;&gt;https://askubuntu.com/questions/131900/how-do-i-switch-the-command-key-and-control-key-on-a-macbook-pro#158014&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2018-01-06T03:18:02.127" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14340" PostTypeId="1" CreationDate="2018-01-06T08:12:32.773" Score="0" ViewCount="464" Body="&lt;p&gt;I recently switched from Ubuntu to elementary OS and my right click on my laptop doesn't work. I used to solve this in Ubuntu by editing the 50-syaptics.config file. I would like to edit the 50-syaptics.config file to enable right click but I can not find it in elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="13229" LastEditorUserId="13235" LastEditDate="2018-01-10T15:11:13.250" LastActivityDate="2023-12-11T18:02:05.247" Title="50-synaptics.config file missing" Tags="|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14341" PostTypeId="1" AcceptedAnswerId="16188" CreationDate="2018-01-06T11:22:08.227" Score="0" ViewCount="708" Body="&lt;p&gt;I am a happy loki user but the screen tearing in videos is horrible. It doesn't  matter if it is a video played in VLC or a YouTube or Netflix video in firefox. I always experience the tearing so it looks like v-snyc isn't enabled? I have an Asus K56CB Notebook with an integrated Intel Graphics card and an Nvidia 635M. The Nivida driver is installed through the app center but I use the intel chip because of battery life aspects. Besides, the nvidia chip doesn't a better job there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any change to get rid of that?&lt;/p&gt;&#xA;" OwnerUserId="13230" LastActivityDate="2018-08-31T04:22:58.157" Title="eOS Loki - Video Tearing with Intel Graphic Card" Tags="|release-loki|graphic-drivers|intel|videos|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14342" PostTypeId="2" ParentId="13404" CreationDate="2018-01-06T13:38:28.793" Score="0" Body="&lt;p&gt;I have this problem also. I've had this problem across 3 installations of Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that pantheon files doesn't seem to save the new name without you pressing enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So long as you press enter after typing the new name it works, but if you click outside of the file you're renaming it fails.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2018-01-06T13:38:28.793" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14343" PostTypeId="1" CreationDate="2018-01-06T14:25:48.463" Score="0" ViewCount="58" Body="&lt;p&gt;i am using Elementary OS. My motherboard is Gigabyte H110M-S2. How to tell if my motherboard has Bluetooth capabilities??&lt;/p&gt;&#xA;" OwnerUserId="8636" LastActivityDate="2023-12-09T20:02:55.320" Title="Motherboard with or without bluetooth capabilities" Tags="|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14344" PostTypeId="2" ParentId="10953" CreationDate="2018-01-06T19:28:56.183" Score="0" Body="&lt;p&gt;If you have the latest official driver from Nvidia, there is an option to switch to 'Power save mode' which uses the Intel GPU and you do not need to remove the driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oBxXH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oBxXH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-06T19:28:56.183" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14345" PostTypeId="1" AcceptedAnswerId="14347" CreationDate="2018-01-07T08:31:21.177" Score="1" ViewCount="2377" Body="&lt;p&gt;I installed Unity desktop on ElementaryOS but after it caused slowness I decided to remove it. I saw this post on Askubuntu.com: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove unity&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove lightdm&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove ubuntu-desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately,  after these commands I reboot and my log in screen disappeared with a black screen. How can I resolve that? And what caused this to happen?&lt;/p&gt;&#xA;" OwnerUserId="13128" LastEditorUserId="13128" LastEditDate="2018-01-07T08:39:45.153" LastActivityDate="2018-01-07T13:09:20.740" Title="Black screen on log in" Tags="|pantheon-files|greeter|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14346" PostTypeId="2" ParentId="14340" CreationDate="2018-01-07T09:33:18.320" Score="0" Body="&lt;p&gt;You could try to locate the file using &lt;code&gt;apt-file&lt;/code&gt; (check the spelling though, I'm sure it's &quot;synaptics&quot; and not &quot;syaptics&quot;) and then install the according package. Try that first, because without the according drivers, the driver settings in that file are useless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, that's still just a configuration file which is loaded as one of many from a directory. The &quot;50-&quot; gives that away, it is used to control the order of loading. So, you could just as well create your own file with the according settings or the settings could be present in any other file already, waiting for you to edit them.&lt;/p&gt;&#xA;" OwnerUserId="13235" LastEditorUserId="13235" LastEditDate="2018-01-07T10:22:53.537" LastActivityDate="2018-01-07T10:22:53.537" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14347" PostTypeId="2" ParentId="14345" CreationDate="2018-01-07T13:09:20.740" Score="2" Body="&lt;p&gt;If I recall correctly, you should be able to press &lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;Alt&lt;/code&gt;+&lt;code&gt;F2&lt;/code&gt; and login with your username/password, then run &lt;code&gt;sudo dpkg-reconfigure pantheon-greeter&lt;/code&gt; to do this. &lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-01-07T13:09:20.740" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14349" PostTypeId="2" ParentId="14343" CreationDate="2018-01-07T13:16:44.383" Score="0" Body="&lt;p&gt;If you have bluetooth, the bluetooth indicator should probably be shown?&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-07T13:16:44.383" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14350" PostTypeId="1" CreationDate="2018-01-07T16:10:59.180" Score="0" ViewCount="766" Body="&lt;p&gt;i have installed latest elementary OS 0.4.1 Loki and was doing bit of searching about tips and tricks for getting tweaks but in the process got a very annoying problem.&#xA;i have a wireless mouse. when i try to move it after when its in rest for like 5 seconds for making it move again i have to shake it for few times then the pointer again starts moving. while touchpad has no such issues.&#xA;please check the video for my issue&#xA;&lt;a href=&quot;https://photos.app.goo.gl/FfzWczNMivdnEa7W2&quot; rel=&quot;nofollow noreferrer&quot;&gt;video of the issue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13237" LastActivityDate="2019-05-12T03:03:10.567" Title="Mouse Pointer Lag issue" Tags="|updates|display|mouse|playonlinux|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14351" PostTypeId="1" AcceptedAnswerId="15314" CreationDate="2018-01-07T20:47:19.163" Score="1" ViewCount="2589" Body="&lt;p&gt;My Macbook Air runs Elementary OS 0.4.1 Loki and my webcam is not working out of the box. First thing I've done was trying to identify the precise device&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lsusb&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 002: ID 05ac:8406 Apple, Inc. &#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 003: ID 05ac:0291 Apple, Inc. &#xA;Bus 001 Device 006: ID 05ac:828f Apple, Inc. &#xA;Bus 001 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lspci&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;02:00.0 Multimedia controller: Broadcom Corporation 720p FaceTime HD Camera&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I can assume, first of all, is that the webcam is not recognised as an usb device but as a pci one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sincerely speaking, I don't know if this represent a problem or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, as far as I can see, the unique solution online is &lt;a href=&quot;https://github.com/patjak/bcwc_pcie/wiki&quot; rel=&quot;nofollow noreferrer&quot;&gt;bcwc_pcie driver&lt;/a&gt;. This driver was created for FacetimeHD (Broadcom 0x1570) PCIe webcam. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've followed the &lt;a href=&quot;https://github.com/patjak/bcwc_pcie/wiki/Get-Started&quot; rel=&quot;nofollow noreferrer&quot;&gt;Get started&lt;/a&gt; wiki page, extracting the firmware and, then, installing it, but I really can't make the webcam working. To sum up what I did was:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Going to my Documents folders&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd Documents&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install curl xz-utils cpio&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;git clone https://github.com/patjak/bcwc_pcie.git&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cd bcwc_pcie/firmware/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;enter preformatted text here&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;$ make&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;# make install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The result was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;luca@lucabook:~/Documents/bcwc_pcie/firmware$ make&#xA;&#xA;Checking dependencies for driver download...&#xA;/usr/bin/curl&#xA;/usr/bin/xzcat&#xA;/bin/cpio&#xA;&#xA;Downloading the driver, please wait...&#xA;&#xA;&#xA;Found matching hash from OS X, El Capitan 10.11.3&#xA;==&amp;gt; Extracting firmware...&#xA; --&amp;gt; Decompressing the firmware using gzip...&#xA; --&amp;gt; Deleting temporary files...&#xA; --&amp;gt; Extracted firmware version 1.43.0&#xA;&#xA;luca@lucabook:~/Documents/bcwc_pcie/firmware$ sudo su&#xA;root@lucabook:/home/luca/Documents/bcwc_pcie/firmware# make install&#xA;Copying firmware into '//lib/firmware/facetimehd'&#xA;root@lucabook:/home/luca/Documents/bcwc_pcie/firmware# &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, after the firmware extraction, I installed it (following the Ubuntu/Debian instructions):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install  linux-headers-4.10.0-42-generic linux-headers-4.10.0-42-lowlatency git kmod libssl-dev checkinstall&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;removed the &quot;old&quot; bcwc_pcie driver directory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rm -rf bcwc-pcie/&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;git it again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ git clone https://github.com/patjak/bcwc_pcie.git&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now make the kernel module:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;luca@lucabook:~/Documents/bcwc_pcie$ make&#xA;make -C /lib/modules/4.10.0-42-generic/build M=/home/luca/Documents/bcwc_pcie modules&#xA;make[1]: Entering directory '/usr/src/linux-headers-4.10.0-42-generic'&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_ddr.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_hw.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_drv.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_ringbuf.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_isp.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_v4l2.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_buffer.o&#xA;  CC [M]  /home/luca/Documents/bcwc_pcie/fthd_debugfs.o&#xA;  LD [M]  /home/luca/Documents/bcwc_pcie/facetimehd.o&#xA;  Building modules, stage 2.&#xA;  MODPOST 1 modules&#xA;  CC      /home/luca/Documents/bcwc_pcie/facetimehd.mod.o&#xA;  LD [M]  /home/luca/Documents/bcwc_pcie/facetimehd.ko&#xA;make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-42-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And make install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;luca@lucabook:~/Documents/bcwc_pcie$ sudo su&#xA;root@lucabook:/home/luca/Documents/bcwc_pcie# make install&#xA;make -C /lib/modules/4.10.0-42-generic/build M=/home/luca/Documents/bcwc_pcie modules_install&#xA;make[1]: Entering directory '/usr/src/linux-headers-4.10.0-42-generic'&#xA;INSTALL /home/luca/Documents/bcwc_pcie/facetimehd.ko&#xA;At main.c:158:&#xA;- SSL error:02001002:system library:fopen:No such file or directory: bss_file.c:175&#xA;- SSL error:2006D080:BIO routines:BIO_new_file:no such file: bss_file.c:178&#xA;sign-file: certs/signing_key.pem: No such file or directory&#xA;DEPMOD  4.10.0-42-generic&#xA;make[1]: Leaving directory '/usr/src/linux-headers-4.10.0-42-generic'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To end the installation, I only run depmod and loaded the kernel module:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@lucabook:/home/luca/Documents/bcwc_pcie# depmod&#xA;root@lucabook:/home/luca/Documents/bcwc_pcie# modprobe facetimehd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Listing the active modules, this is what I can see:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@lucabook:/home/luca/Documents/bcwc_pcie# lsmod | grep facetimehd&#xA;facetimehd            102400  0&#xA;videobuf2_dma_sg       16384  1 facetimehd&#xA;videobuf2_v4l2         24576  1 facetimehd&#xA;videobuf2_core         40960  2 facetimehd,videobuf2_v4l2&#xA;videodev              172032  3 facetimehd,videobuf2_core,videobuf2_v4l2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The question is, why my webcam is still not working? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help!&lt;/p&gt;&#xA;" OwnerUserId="13239" LastEditorUserId="13239" LastEditDate="2018-01-09T20:40:23.447" LastActivityDate="2022-12-24T06:37:23.217" Title="MacBook Air Facetime HD" Tags="|release-loki|macbook|webcam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14352" PostTypeId="1" AcceptedAnswerId="14369" CreationDate="2018-01-08T00:18:56.833" Score="3" ViewCount="329" Body="&lt;p&gt;Elementary has nice default image viewer called Photos. But I can't understand how to delete image file in view mode. I saw &quot;move to trash&quot; option in main menu of this app, but I didn't see any similar option in view mode. Can you tell me hotkey for this action?&lt;/p&gt;&#xA;" OwnerUserId="12150" LastActivityDate="2018-01-09T19:40:26.883" Title="How can I delete image files using default Photos app?" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14354" PostTypeId="1" CreationDate="2018-01-08T15:39:33.660" Score="1" ViewCount="31" Body="&lt;p&gt;I can not recover the trim menu.excuse my english sorry&lt;a href=&quot;https://i.stack.imgur.com/YP5qh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YP5qh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13245" LastActivityDate="2018-01-08T15:39:33.660" Title="Photos missed the cut menu" Tags="|photos|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14355" PostTypeId="2" ParentId="14343" CreationDate="2018-01-08T16:07:15.857" Score="0" Body="&lt;p&gt;The bluetooth icon in the top right corner will be showing if you have bluetooth&lt;/p&gt;&#xA;" OwnerUserId="13246" LastActivityDate="2018-01-08T16:07:15.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14357" PostTypeId="1" CreationDate="2018-01-08T17:43:36.933" Score="0" ViewCount="2092" Body="&lt;p&gt;I wondering what commands can be used to make the system as smooth and battery saving as possible. Similar to how XFCE is in Antergos or Manjaro.&lt;/p&gt;&#xA;" OwnerUserId="11675" LastEditorDisplayName="user9220" LastEditDate="2018-01-10T15:13:59.550" LastActivityDate="2019-05-08T08:02:10.690" Title="How To Improve Laptop Power Efficiency" Tags="|battery|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14359" PostTypeId="2" ParentId="14357" CreationDate="2018-01-09T11:26:06.093" Score="1" Body="&lt;p&gt;I recommend installing TLP. You can do this with &lt;code&gt;sudo apt install tlp&lt;/code&gt; in the terminal. TLP is a power management tool that comes with a preconfigured profile that should help increase battery life and power management overall, and can handle plugged and unplugged modes respectively. To enable it after install, type &lt;code&gt;sudo tlp start&lt;/code&gt; and to check its status, use &lt;code&gt;sudo tlp stat&lt;/code&gt;. Keep in mind that Ubuntu and furthermore Elementary are considerably more demanding systems than most Arch or Arch based ones, and with the Pantheon desktop, you'll also see some more resource demands. I recommend adjusting brightness if you can, and if you want further control, you can edit the TLP profile to handle things the way you want them to be handled. Here's the ArchWiki page for further information on TLP itself. &lt;a href=&quot;https://wiki.archlinux.org/index.php/TLP&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/TLP&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-01-09T11:26:06.093" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14362" PostTypeId="1" CreationDate="2018-01-09T13:42:22.777" Score="0" ViewCount="42" Body="&lt;p&gt;I know that we can develop application in Vala for elemantry. But, do we have support for Genie? If I write application in Genie, should it has elemantry support?&lt;/p&gt;&#xA;" OwnerUserId="12903" LastActivityDate="2018-01-18T16:18:15.070" Title="AppCenter support for Genie" Tags="|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14363" PostTypeId="1" CreationDate="2018-01-09T14:17:57.240" Score="1" ViewCount="694" Body="&lt;p&gt;since a few days I cannot &lt;code&gt;apt update&lt;/code&gt; any more, it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://repo.steampowered.com/steam precise InRelease&#xA;Hit:2 http://de.archive.ubuntu.com/ubuntu xenial InRelease                                                           &#xA;Hit:3 http://security.ubuntu.com/ubuntu xenial-security InRelease                                                    &#xA;Hit:4 http://ppa.launchpad.net/cybre/sni-qt-eplus/ubuntu xenial InRelease                                            &#xA;Hit:5 http://de.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                        &#xA;Hit:6 http://de.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                      &#xA;Hit:7 http://ppa.launchpad.net/elementary-os/daily/ubuntu xenial InRelease                    &#xA;Get:8 http://packages.elementary.io/appcenter xenial InRelease [5.893 B]&#xA;Hit:9 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease                                    &#xA;Hit:10 http://ppa.launchpad.net/graphics-drivers/ppa/ubuntu xenial InRelease &#xA;Hit:11 http://ppa.launchpad.net/jonathonf/vim/ubuntu xenial InRelease        &#xA;Hit:12 http://ppa.launchpad.net/nextcloud-devs/client/ubuntu xenial InRelease &#xA;Hit:13 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease           &#xA;Hit:14 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease&#xA;Hit:15 http://ppa.launchpad.net/teejee2008/ppa/ubuntu xenial InRelease       &#xA;Hit:16 http://ppa.launchpad.net/ubuntu-mozilla-daily/firefox-aurora/ubuntu xenial InRelease&#xA;Err:8 http://packages.elementary.io/appcenter xenial InRelease                &#xA;  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A74F73EFFE70B91C&#xA;Reading package lists... Done &#xA;W: GPG error: http://packages.elementary.io/appcenter xenial InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A74F73EFFE70B91C&#xA;E: The repository 'http://packages.elementary.io/appcenter xenial InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Googling for this tells me I should somehow add the public key but solutions like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo LANG=C apt-key adv --keyserver keyserver.ubuntu.com --recv-keys A74F73EFFE70B91C&#xA;Executing: /tmp/tmp.TzN2XR5fIq/gpg.1.sh --keyserver&#xA;keyserver.ubuntu.com&#xA;--recv-keys&#xA;A74F73EFFE70B91C&#xA;gpg: requesting key FE70B91C from hkp server keyserver.ubuntu.com&#xA;gpgkeys: key A74F73EFFE70B91C not found on keyserver&#xA;gpg: no valid OpenPGP data found.&#xA;gpg: Total number processed: 0&#xA;gpg: keyserver communications error: key not found&#xA;gpg: keyserver communications error: bad public key&#xA;gpg: keyserver receive failed: bad public key&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;do not work as well. Maybe elementary uses another keyserver than ubuntu?&#xA;Or something else is broken?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AppCenter also aborts with an error message (same reason)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2984/error-signatures-couldnt-be-verified-because-the-public-key-is-not-available&quot;&gt;this question&lt;/a&gt; but (as above) the solutions provided here do not work in my case&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would be very glad if someone could help, thanks a lot in advance&lt;/p&gt;&#xA;" OwnerUserId="11738" LastActivityDate="2018-01-09T14:17:57.240" Title="apt update fails with GPG Error for appcenter xenial InRelease no public key" Tags="|appcenter|apt|gpg|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14366" PostTypeId="1" CreationDate="2018-01-09T15:09:33.013" Score="2" ViewCount="76" Body="&lt;p&gt;I have involuntary renamed Pictures Folder. I have lost the custom icon on it. Is it possible to recover the Pictures icon once the folder is renamed again to Pictures?&lt;/p&gt;&#xA;" OwnerUserId="9319" LastActivityDate="2018-12-27T09:02:40.603" Title="Lost Pictures Folder Icon" Tags="|icons|folder|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14367" PostTypeId="1" CreationDate="2018-01-09T16:14:30.487" Score="1" ViewCount="645" Body="&lt;p&gt;I've downloaded the free Sophos antivirus package for Linux (is this a good antivirus for eOS Loki?). However, I'm still a beginner and I don't know how to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I extracted the package in the Downloads folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/anna/Downloads/sav-linux-free-9.tgz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The extracted files are: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;install.sh&#xA;sav.tar&#xA;talpa.tar&#xA;uncdownload.tar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do next. I tried following the Sophos online instructions for installing on a standalone, but I didn't know how to copy the package to a temporary folder and when I enter the install command in root, it says it can't locate the package:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Download the relevant tarball for your platform and copy it to a&#xA;  temporary directory. For example: &lt;code&gt;/tmp&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Change to the temporary directory and untar the tarball. For example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;tar -xzvf tarball&#xA;Run the install script:&#xA;./sophos-av/install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Follow the on-screen instructions to complete installation.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is no support for home linux users from Sophos. Can anyone in this community help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="604" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:30.747" LastActivityDate="2024-01-11T01:00:20.047" Title="Beginner help installing Sophos antivirus package on elementary os Loki" Tags="|release-loki|software-installation|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14369" PostTypeId="2" ParentId="14352" CreationDate="2018-01-09T19:40:26.883" Score="4" Body="&lt;p&gt;You can't, yet:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/photos/issues/44&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/photos/issues/44&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/photos/issues/51&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/photos/issues/51&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's one of the features I'm hoping are added in the future:  &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5587/working-with-photos-in-elementaryos&quot;&gt;Working with photos in ElementaryOS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-09T19:40:26.883" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14371" PostTypeId="1" CreationDate="2018-01-09T20:55:28.107" Score="2" ViewCount="374" Body="&lt;p&gt;I am an emacs user, and the elementaryOS short-cut keys for copy/paste really bug me. Is it possible to rebind C-c, C-v, C-a to super-c, super-v, super-a etc? (where super is the cmd/win key - i use a macbookpro) ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or any other way to rebind the copy/paste shortcut keys?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="13233" LastActivityDate="2018-02-18T03:10:01.320" Title="How to rebind the copy/paste shortcut keys?" Tags="|release-loki|settings|keyboard|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14373" PostTypeId="1" CreationDate="2018-01-09T22:17:24.017" Score="1" ViewCount="98" Body="&lt;p&gt;I really like elementary os, i installed it on my 15&quot; MBP 2015 -- however the battery life is pretty bad. I get about 3 hours maximum if i'm lucky -- this is much less than the 10 hours i'm used to on this laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any MBP specific tips for improving battery life? I've read a few articles about setting up TLP, which i did, but it hasn't really helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: the most power-hungry process (according to power-top is radeon (my graphics card))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;3.9 ms/s 57.8 Interrupt [37] radeon&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13233" LastActivityDate="2018-01-09T22:17:24.017" Title="How to improve battery life on MBP 2015?" Tags="|macbook|power|battery|apple|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14374" PostTypeId="2" ParentId="636" CreationDate="2018-01-10T02:37:20.547" Score="0" Body="&lt;p&gt;You may be able to adjust the brightness from the terminal using the xrandr command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;start with xrandr --listmonitors to find the ID for your 2nd display (in my case it is HDMI-1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then you will run something like this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xrandr --output HDMI-1 --brightness 0.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this sets the brightness to 40%&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not very elegant, but it works for me at least. Hope that helps and good luck! :-)&lt;/p&gt;&#xA;" OwnerUserId="11726" LastActivityDate="2018-01-10T02:37:20.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14377" PostTypeId="1" AcceptedAnswerId="14381" CreationDate="2018-01-10T17:37:04.703" Score="0" ViewCount="679" Body="&lt;p&gt;&lt;strong&gt;Solved:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was solved with an update that was just pushed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The problem:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an XPS 13 (9360) laptop that has an external monitor plugged in through HDMI using a Dell USB-C adapter. Going to Settings-&gt;Displays shows the external monitor but enabling it simply gives it a black screen. I can drag my mouse over to the area that was set for the monitor to display in (e.g.: if the monitor was set up to display to the right of me built-in monitor, my mouse could move off the screen to the right). After a few times of fiddling with the display settings, the external monitor would just disappear from the display settings as if it had been unplugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The details:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This setup has worked fine on every other distro I have using on this laptop.&lt;/li&gt;&#xA;&lt;li&gt;I have tried setting up the external monitor using Arandr as well, with the same issues.&lt;/li&gt;&#xA;&lt;li&gt;The monitor &lt;em&gt;does work&lt;/em&gt; when the resolution is lowered by a lot but that is more of a hacky work around than an actual solution, in my opinion.&lt;/li&gt;&#xA;&lt;li&gt;I have also installed all eOS updates and installed the Intel Microcode drivers.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The hardware:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Laptop: &lt;a href=&quot;https://www.notebookcheck.net/Dell-XPS-13-9360-FHD-i5.184562.0.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.notebookcheck.net/Dell-XPS-13-9360-FHD-i5.184562.0.html&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Adapter: &lt;a href=&quot;http://www.dell.com/en-us/shop/dell-adapter-usb-c-to-hdmi-vga-ethernet-usb-30-da200/apd/470-abqn/pc-accessories&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.dell.com/en-us/shop/dell-adapter-usb-c-to-hdmi-vga-ethernet-usb-30-da200/apd/470-abqn/pc-accessories&lt;/a&gt; (ignore the bad reviews, mine is working fine)&lt;/li&gt;&#xA;&lt;li&gt;External display: &lt;a href=&quot;https://www.newegg.com/Product/Product.aspx?Item=N82E16824005150&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.newegg.com/Product/Product.aspx?Item=N82E16824005150&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The begging:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help you could provide would be greatly appreciated. I really want to continue using eOS but this bug will probably push me back to something else if I can't find a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solved:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was solved with an update that was just pushed. &lt;/p&gt;&#xA;" OwnerUserId="13263" LastEditorUserId="13263" LastEditDate="2018-01-10T21:00:57.143" LastActivityDate="2018-01-10T21:00:57.143" Title="Issues setting up external display" Tags="|display|laptop|hdmi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14380" PostTypeId="1" AcceptedAnswerId="14390" CreationDate="2018-01-10T18:09:02.423" Score="1" ViewCount="516" Body="&lt;p&gt;the app center is still showing intel-microcode 20170707&#xA;When can we get intel-microcode 20180108 ?(for the spectre bug fix?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also when will elementary os update the kernel for the meltdown fix? still have kernel 4.10 without kpti&lt;/p&gt;&#xA;&#xA;&lt;p&gt;grz&lt;/p&gt;&#xA;" OwnerUserId="13264" LastActivityDate="2018-01-12T21:38:55.947" Title="intel-microcode 20180108 not in app center?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14381" PostTypeId="2" ParentId="14377" CreationDate="2018-01-10T20:57:05.217" Score="1" Body="&lt;p&gt;An eOS system update was just pushed and seems to have solved this issue. The monitor now displays with the proper resolution. Setting monitor positions and primary/secondary settings is still really jank but it is possible to work with it until everything is right.&lt;/p&gt;&#xA;" OwnerUserId="13263" LastActivityDate="2018-01-10T20:57:05.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14383" PostTypeId="1" CreationDate="2018-01-11T07:14:50.903" Score="0" ViewCount="336" Body="&lt;p&gt;As the title says, keyboard repeat stopped working. I mean the behavior which causes repeating key presses when holding a button. For example holding the right arrow should move my cursor between words, but it does not. Holding an 'f' button does not type in 'fffffff' in any application at all. It does not work anywhere. Keyboard settings seem to be configured properly in the &lt;code&gt;switchboard&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I discovered using &lt;code&gt;xev&lt;/code&gt; that my &lt;a href=&quot;/questions/tagged/system&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;system&amp;#39;&quot; rel=&quot;tag&quot;&gt;system&lt;/a&gt; is registering key presses constantly, even when I am not pressing anything. &lt;code&gt;xev&lt;/code&gt; returns the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;KeyPress event, serial 37, synthetic NO, window 0x3e00001,&#xA;root 0x2c8, subw 0x0, time 161832, (322,168), root:(1193,635),&#xA;state 0x0, keycode 221 (keysym 0x0, NoSymbol), same_screen YES,&#xA;XLookupString gives 0 bytes: &#xA;XmbLookupString gives 0 bytes: &#xA;XFilterEvent returns: False&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This event keeps popping up constantly, again, without pressing anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue on how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="5863" LastEditorUserId="16827" LastEditDate="2019-01-07T18:09:36.167" LastActivityDate="2019-01-07T18:09:36.167" Title="Key repeat does not work after last OS update" Tags="|updates|keyboard|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14384" PostTypeId="1" CreationDate="2018-01-11T07:46:24.830" Score="0" ViewCount="288" Body="&lt;p&gt;I am not an expert in the terminal but I understand how it works a little. So I wanted to remove some themes from my elementary OS Loki. First I deleted the &lt;code&gt;.theme&lt;/code&gt; folder, but on the tweaks I could still see some themes available that I installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in terminal I removed some macOS themes, and then I saw this Adwaita package in Tweaks and I wanted to remove. I run the command: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove adwaita-icon-theme &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By removing it, all the icons were removed. I tried to reinstall it then and restart the system. But now I can’t boot in. It’s stacked at the Elementary Logo. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix my system? Can I do it with a live USB? If yes how? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After google a while I realised that the package is at the core of the gnome desktop environment. And by removing it other packages and libraries were broken, removed. But I still hope for a solution.&lt;/p&gt;&#xA;" OwnerUserId="6291" LastEditorUserId="6291" LastEditDate="2018-01-11T08:07:23.433" LastActivityDate="2019-05-08T05:01:55.313" Title="Adwaita package removed - can’t boot in" Tags="|release-loki|boot|system|icons|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14385" PostTypeId="2" ParentId="14384" CreationDate="2018-01-11T09:34:42.350" Score="1" Body="&lt;p&gt;I managed to log in in the console &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;, where I run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then when I reboot the os I could see the desktop and a prompt to login. However after I login, I could only see the  wallpaper. No dock or status bar were displayed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I switched back to the console, and I installed the &lt;code&gt;plank&lt;/code&gt; and reinstalled &lt;code&gt;pantheon&lt;/code&gt;, &lt;code&gt;pantheon-shell&lt;/code&gt;, reboot it. And that fixed the desktop environment. Still, some programs were lost, as Videos and Chromium, and some settings were also lost, but most of them were still kept.&lt;/p&gt;&#xA;" OwnerUserId="6291" LastActivityDate="2018-01-11T09:34:42.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14386" PostTypeId="2" ParentId="14383" CreationDate="2018-01-11T11:35:50.330" Score="1" Body="&lt;p&gt;It seems to be caused by a bug in the kernel module &lt;code&gt;peaq_wmi&lt;/code&gt; as unloading it fixes the issue. This bug was intruced by the 4.13 kernel update. More people have had it. More info here: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=230340&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arch linux forum&lt;/a&gt;, and the solution is here: &lt;a href=&quot;https://unix.stackexchange.com/questions/395535/autorepeat-does-not-work/416363#416363&quot;&gt;unix &amp;amp; linux autorepeat does not work&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that updating the linux kernel of elementaryOS will be mandatory once again (once the issue is resolved), in order to solve the issue for people incapable of fixing this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I am on Lenovo Yoga 500-14IHW&lt;/p&gt;&#xA;" OwnerUserId="5863" LastEditorUserId="5863" LastEditDate="2018-01-11T14:21:54.753" LastActivityDate="2018-01-11T14:21:54.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14387" PostTypeId="1" CreationDate="2018-01-11T14:15:36.440" Score="1" ViewCount="1784" Body="&lt;p&gt;I will post it here, since I cannot find chat to ask a question or any specific place to post bugs. Sorry, if it's wrong place to post such bug, redirect me in right direction please.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;My setup&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Freshly (10.01.2018) downloaded and installed elementary os. No additional PPAs. After installation my work've been:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt update; apt upgrade; apt install chromium-browser firefox mc pydf grc zsh git transmission; dpkg -i ~/Downloads/slack.deb ; apt install -f; apt autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I have pretty standard system.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Problem&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt update&lt;/code&gt; leads to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;--- ~ » sudo apt update                                                                                                               100 ↵&#xA;Hit:1 http://ru.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://ru.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                                         &#xA;Hit:3 http://ru.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                                       &#xA;Ign:4 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki InRelease                                                                  &#xA;Hit:5 http://security.ubuntu.com/ubuntu xenial-security InRelease                             &#xA;Ign:6 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki InRelease                      &#xA;Ign:7 http://packages.elementary.io/appcenter loki InRelease                                       &#xA;Err:8 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release                            &#xA;  404  Not Found&#xA;Err:9 http://packages.elementary.io/appcenter loki Release&#xA;  404  Not Found [IP: 104.28.5.44 80]&#xA;Err:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release&#xA;  404  Not Found&#xA;Hit:11 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease&#xA;Reading package lists... Done &#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://packages.elementary.io/appcenter loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Problem is here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;Err:8 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release                            &#xA;  404  Not Found&#xA;Err:9 http://packages.elementary.io/appcenter loki Release&#xA;  404  Not Found [IP: 104.28.5.44 80]&#xA;Err:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release&#xA;  404  Not Found&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;My hypotesis&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cat /etc/apt/sources.list.d/elementary.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu loki main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu loki main&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There should be &lt;code&gt;xenial&lt;/code&gt; instead of &lt;code&gt;loki&lt;/code&gt;. Same goes for&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/apt/sources.list.d/appcenter.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/apt/sources.list.d/patches.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h3&gt;Taken actions&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;I've done this &lt;code&gt;find /etc/apt/sources.list.d/ -type f -exec sed -i.bak -e 's/loki/xenial/' '{}' \;&lt;/code&gt;&#xA;Then &lt;code&gt;apt upgrade&lt;/code&gt;. Below lies output of &lt;code&gt;apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  indicator-bluetooth indicator-datetime indicator-keyboard indicator-power indicator-sound liburl-dispatcher1 libvala-0.34-0&#xA;  ubuntu-touch-sounds&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following NEW packages will be installed:&#xA;  libvala-0.36-0&#xA;The following packages have been kept back:&#xA;  appcenter audience capnet-assist gala libgala0 libmaya-calendar0 libnoise-core0 libpantheon-files-core0 libpantheon-files-widgets0&#xA;  maya-calendar maya-calendar-daemon maya-calendar-plugin-caldav maya-calendar-plugin-google noise pantheon-calculator pantheon-files&#xA;  pantheon-greeter pantheon-mail pantheon-photos pantheon-photos-common pantheon-terminal screenshot-tool slingshot-launcher&#xA;  snap-photobooth user-specific-alternatives&#xA;The following packages will be upgraded:&#xA;  base-files bash cerbere contractor dkms elementary-icon-theme elementary-theme evince evince-common hicolor-icon-theme libevdocument3-4&#xA;  libevview3-3 libgranite-common libnm-gtk-common libnm-gtk0 libnma-common libnma0 libpantheon-online-accounts0 libscratchcore0&#xA;  libunity-control-center1 libwingpanel-2.0-0 network-manager-gnome pantheon-agent-polkit pantheon-online-accounts-plugin-fastmail&#xA;  pantheon-online-accounts-plugin-password pantheon-print scratch-text-editor switchboard-plug-about switchboard-plug-networking&#xA;  switchboard-plug-notifications switchboard-plug-online-accounts switchboard-plug-useraccounts switchboard-plug-users&#xA;  unity-control-center unity-control-center-faces wingpanel wingpanel-indicator-bluetooth wingpanel-indicator-network&#xA;38 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.&#xA;Need to get 13,4 MB of archives.&#xA;After this operation, 20,9 MB of additional disk space will be used.&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Many packages with names &lt;code&gt;pantheon-*&lt;/code&gt;, &lt;code&gt;switchboard-*&lt;/code&gt;, &lt;code&gt;*gala*&lt;/code&gt;, &lt;code&gt;*vala*&lt;/code&gt; etc, lead me to think, that this is correct decision.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Question&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Is my actions from previous section is the right ones? Am I safe to upgrade? (I think so). If that's the case - should I report it somewhere else? Make a simple PR? (cannot find related repo though)&lt;/p&gt;&#xA;" OwnerUserId="13269" LastActivityDate="2018-02-11T20:38:55.133" Title="Missing release files during apt update" Tags="|release-loki|updates|apt|" AnswerCount="1" CommentCount="2" ClosedDate="2018-02-12T09:57:50.683" ContentLicense="CC BY-SA 3.0" />
  <row Id="14389" PostTypeId="1" AcceptedAnswerId="14395" CreationDate="2018-01-12T04:05:00.513" Score="2" ViewCount="375" Body="&lt;p&gt;I've been using Elementary OS daily this week and every day there is a update in the app center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The update just appears as &lt;code&gt;operating system updates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is that normal?&lt;/p&gt;&#xA;" OwnerUserId="11909" LastActivityDate="2018-01-14T17:56:50.497" Title="Elementary OS is asking me for OS update daily. Is that normal?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14390" PostTypeId="2" ParentId="14380" CreationDate="2018-01-12T05:46:56.147" Score="1" Body="&lt;p&gt;Today I got it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;» lsb_release -a                               &#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 0.4.1 Loki&#xA;Release:        0.4.1&#xA;Codename:       loki&#xA;» apt show intel-microcode | grep Version&#xA;&#xA;Version: 3.20180108.0~ubuntu16.04.2&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as of kernel. I personally have&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;» uname -a                                                                                                  127 ↵&#xA;Linux darkstar 4.13.0-26-generic #29~16.04.2-Ubuntu SMP Tue Jan 9 22:00:44 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(fresh install) as per &lt;code&gt;apt search linux-image&lt;/code&gt; I see plenty of kernels there, I should be able to install something appropriate&lt;/p&gt;&#xA;" OwnerUserId="13269" LastActivityDate="2018-01-12T05:46:56.147" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14392" PostTypeId="2" ParentId="14143" CreationDate="2018-01-12T08:26:39.913" Score="1" Body="&lt;p&gt;Answered on &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7jmf2n/duplicate_songs_in_noise_and_lollypop/dskadbd/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/7jmf2n/duplicate_songs_in_noise_and_lollypop/dskadbd/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed this happening when I import music with the &quot;Import to Library…&quot; menu item in settings. I figure it could be a matter of the &quot;Copy imported folders to Library&quot; preference where the program could be importing a folder and adding it, then see the files copied in the library and show those too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact browsing the sqlite database shows the double entries one with a path in ~/Music and the other at the original path where they were imported from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't delved much into trying to debug this since I have to rebuild the library every time and it's time-consuming, but since Noise seems to have added the copied files on its own I just disabled &quot;Copy imported folders to Library&quot; and started manually moving files into ~/Music, the changes will be reflected automatically in my Library.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;tl;dr&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;disable copying to library and move files by hand to ~/Music&#xA;(or wherever your music library is)&lt;/p&gt;&#xA;" OwnerUserId="8384" LastActivityDate="2018-01-12T08:26:39.913" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14393" PostTypeId="1" CreationDate="2018-01-12T09:27:00.787" Score="0" ViewCount="55" Body="&lt;p&gt;I installed XFCE on top of elementary os to help me transition to pantheon. However, now that I'm ready to fully switch to this beautiful desktop environment I realized that I need to restart lightdm and login a couple of times before the DE actually starts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other info that might be useful is that I am using an external monitor connected with a VGA cable to my laptop (hp probook g4), but I would like to learn how I can track down what's going on and be able to try to fix it myself or at least post a meaningful log here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyhow, I think it's just a matter of resetting a few configurations somewhere but don't know which ones. Sorry for the noob question.&lt;/p&gt;&#xA;" OwnerUserId="13170" LastActivityDate="2019-01-03T00:03:05.627" Title="Need to login many times before pantheon starts ( problem after installing xfce)" Tags="|release-loki|greeter|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14395" PostTypeId="2" ParentId="14389" CreationDate="2018-01-12T11:45:52.967" Score="5" Body="&lt;p&gt;Yes, that's quite normal, usually  it's &quot;upstream&quot; packages. &#xA;The next version of the AppCenter will show more details on those Operating System Updates, see:  &lt;a href=&quot;https://github.com/elementary/appcenter/pull/518&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/pull/518&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you've added third party ppa's you'll also get more frequent Operating System Updates since those updates are not listed separately in the AppCenter. (I'm not sure why)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To see more details on the updates, without the next version of the AppCenter you could run the following commands in the Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;apt list --upgradable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To get more information on a specific package you could run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt show packagename&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-01-14T17:56:50.497" LastActivityDate="2018-01-14T17:56:50.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14396" PostTypeId="1" AcceptedAnswerId="14475" CreationDate="2018-01-12T12:25:04.157" Score="2" ViewCount="1634" Body="&lt;p&gt;I've had VirtualBox 5.0.40 running on Loki for a while now without issues, but recently (as in the last few days) I suspect one of the many OS updates (which probably are to mitigate the various new vulnerabilities discovered) has broken VirtualBox.&#xA;If I start a virtual machine, it starts loading, but before the guest machine even gets to the POST, my entire computer freezes. Only recourse is to hold down power and forcefully shut the machine down. Can't use CTRL-F1 to go to a terminal either. It completely freezes.&#xA;Haven't used VirtualBox for a few days, so don't know which update caused it, but one probably did.&#xA;Anyone else seen this? Any idea how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="11750" LastActivityDate="2018-02-18T10:57:38.717" Title="VirtualBox on Loki freezing entire system" Tags="|release-loki|virtualbox|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14398" PostTypeId="2" ParentId="14396" CreationDate="2018-01-12T14:22:19.487" Score="0" Body="&lt;p&gt;I only can confirm this behaviour. :{&#xA;VirtualBox 5.0.40, Loki 0.4.1, Linux 4.13.0-26-generic&#xA;////&#xA;Update&#xA;////&#xA;Explanation and solution:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/994315/virtualbox-crash-on-kernel-4-13-0-26/994320#994653&quot;&gt;https://askubuntu.com/questions/994315/virtualbox-crash-on-kernel-4-13-0-26/994320#994653&lt;/a&gt;&#xA;Works for me OK.&lt;/p&gt;&#xA;" OwnerUserId="9263" LastEditorUserId="9263" LastEditDate="2018-01-13T10:01:27.177" LastActivityDate="2018-01-13T10:01:27.177" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14399" PostTypeId="1" AcceptedAnswerId="14401" CreationDate="2018-01-12T14:34:48.187" Score="0" ViewCount="280" Body="&lt;p&gt;When extracting files in a folder with lots of files, using right click menu &gt; Extract here, it's quite a hassle to locate the extracted files. I usually start a search on the file name. There is also no feedback whether the extraction worked, as the compressed file stays selected, even when a file / folder is added the scroll position is unchanged (Except for in the Grid view).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to get the files that are extracted selected in some way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This would probably requires adapting the &quot;Extract here&quot; contract file (&lt;code&gt;/usr/share/contractor/file-roller-extract-here.contract&lt;/code&gt;). I however haven't been able to find the origin of this contract, which package adds it. It doesn't seem to be a part of the &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;github.com/elementary&lt;/a&gt; source code, it's also not included in the &lt;a href=&quot;https://github.com/GNOME/file-roller&quot; rel=&quot;nofollow noreferrer&quot;&gt;file-roller&lt;/a&gt; code. Does anyone know? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also see the issue I opened on this, in the not so appropriate place, the elementary Files issue queue: &lt;a href=&quot;https://github.com/elementary/files/issues/289&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/289&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-11T17:34:10.547" Title="Origin Extract here contract" Tags="|pantheon-files|contract|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14400" PostTypeId="2" ParentId="7776" CreationDate="2018-01-12T16:30:11.933" Score="0" Body="&lt;p&gt;Same Problem. Different cause. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem:&lt;/strong&gt;&#xA;The search in &quot;Applications&quot; can be disabled when installing Windows programs via Wine. A 120 character directory was generated including spaces during the install that disabled the search function. It was traced to this directory&#xA;~/.local/share/applications/wine/Programs$ &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not good.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution:&lt;/strong&gt;&#xA;Removed program,*.desktop files, and dead directory name w/spaces. Applications search feature works as designed. Maybe a function tree search code change in Applications can fix this problem. If I can break it, I guarentee someone else will too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Lesson:&lt;/strong&gt;&#xA;For Wine,known Gold/Platinum programs only. If need to use a windows program. Use Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt;&#xA;If your Windows programs run in wine, make sure you check in the wine programs files and ensure the directory names do not contain spaces. Remove them if you want to search Applications. &lt;/p&gt;&#xA;" OwnerUserId="13284" LastEditorUserId="13284" LastEditDate="2018-01-12T16:47:09.020" LastActivityDate="2018-01-12T16:47:09.020" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14401" PostTypeId="2" ParentId="14399" CreationDate="2018-01-12T16:51:39.853" Score="0" Body="&lt;p&gt;The file-roller contract is part of the patched file-roller package that elementary uses. Currently 3.16.5-0ubuntu1.2+elementary4~ubuntu0.4.1.  You can report issues here: &lt;a href=&quot;https://github.com/elementary/ubuntu-package-imports/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/ubuntu-package-imports/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-01-12T16:51:39.853" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14402" PostTypeId="2" ParentId="14387" CreationDate="2018-01-12T17:59:45.040" Score="0" Body="&lt;p&gt;I checked my version of the two files. And both contain the line:&#xA;deb &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; xenial main&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary.list file also have a deb-src line. &#xA;deb-src &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; xenial main&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not edited these files myself at any point, so this should be the out-of-box version.&#xA;I will guess that you are correct and it is safe to upgrade. &lt;/p&gt;&#xA;" OwnerUserId="13286" LastActivityDate="2018-01-12T17:59:45.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14403" PostTypeId="2" ParentId="5093" CreationDate="2018-01-12T19:49:58.797" Score="0" Body="&lt;p&gt;I installed Synaptic Package Manager, found the application I wanted to remove, and it was simple.  I've used Synaptic for years in other distros, just didn't think of it.&lt;/p&gt;&#xA;" OwnerUserId="13287" LastActivityDate="2018-01-12T19:49:58.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14408" PostTypeId="1" CreationDate="2018-01-13T10:33:23.780" Score="1" ViewCount="46" Body="&lt;p&gt;after trying to install and working with EOS on my Notebook i want to donate this realy great OS !!! It works so good and look so nice !!!&#xA;The only thing which doesn't work is the dual boot with windows10 but it don't mind because i do not further need windows any more (...and i am happy about it)&#xA;. The next thing was that i want to donate with paypal and that was difficult to find.&#xA;But at least i found it and you got 15 $ over paypal from me.&#xA;Sorry for this useless Tag but i have no idea to tell you in a other way...&#xA;Greetings&#xA;jochen&lt;/p&gt;&#xA;" OwnerUserId="13295" LastActivityDate="2018-01-13T22:45:55.893" Title="Donating by paypal is hard to find" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ClosedDate="2018-01-29T10:18:40.847" ContentLicense="CC BY-SA 3.0" />
  <row Id="14409" PostTypeId="1" CreationDate="2018-01-13T11:28:17.703" Score="0" ViewCount="433" Body="&lt;p&gt;So i just downloaded the Loki 0.4.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is that when I lock the screen with an external monitor connected to my laptop (it has a different resolution), the lock screen tries to change resolution multiple times during its black screen process which results in slower locking and if I have sound going through eg spotify the sound freezes multiple times, althoguh it continues afterwards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way i can disable the resolution change on lock?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also note that I have installed the latest nvidia driver (390)&lt;/p&gt;&#xA;" OwnerUserId="13296" LastActivityDate="2019-12-14T10:03:05.327" Title="Multiple display resolution issue on lock screen" Tags="|greeter|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14410" PostTypeId="1" CreationDate="2018-01-13T12:39:43.547" Score="0" ViewCount="563" Body="&lt;p&gt;I want to try elementary OS before installing so I booted from ISO disk Loki 0.4.1. After start up, there is no internet connection. when I click on the icon, the open window only shows a connection for wired Ethernet. when I try to add my ATT connection and password, the save button remains greyed-out and I cannot get the computer to recognize my wifi access point (or any Wifi) or connect. Currently running linux mint maya on an old DELL Inspiron 9400 and it is working pretty well. When I use &lt;code&gt;lshw -C network&lt;/code&gt; in terminal when running mint it shows &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;       description: Wireless interface&#xA;       product: BCM4321 802.11a/b/g/n&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:0c:00.0&#xA;       logical name: wlan0&#xA;       version: 01&#xA;       serial: 00:16:cf:38:88:b3&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=wl0 driverversion=6.30.223.248 (r487574) ip=192.168.1.70 latency=0 multicast=yes wireless=IEEE 802.11abg&#xA;       resources: irq:17 memory:dfcfc000-dfcfffff memory:d0000000-d00fffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13297" LastEditorUserId="578" LastEditDate="2018-01-22T20:27:34.133" LastActivityDate="2023-12-24T08:02:10.227" Title="After booting from disk no wifi access appears only ethernet wired" Tags="|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14412" PostTypeId="1" CreationDate="2018-01-13T21:20:50.507" Score="1" ViewCount="128" Body="&lt;p&gt;After the latest update, I can no longer scroll using touchpad and key repeating no longer works.  Anyone else have similar issues?&lt;/p&gt;&#xA;" OwnerUserId="13302" LastActivityDate="2019-09-05T12:38:51.397" Title="Multi touch stopped working after latest update" Tags="|touchpad|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14413" PostTypeId="2" ParentId="14410" CreationDate="2018-01-13T21:43:36.167" Score="0" Body="&lt;p&gt;In Terminal: &lt;code&gt;nm-connection-editor&lt;/code&gt;. Add your new connection and also make it default: click Edit &gt; General tab &gt; check &quot;Automatically connect to this network when it is available&quot;. Also, for the Ethernet connection which is present from the start: Edit &gt; General tab &gt; uncheck &quot;Automatically connect to this network when it is available&quot;. Then connect to your newly added connection.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/DgaEa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DgaEa.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2018-01-14T07:52:04.887" LastActivityDate="2018-01-14T07:52:04.887" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14416" PostTypeId="1" CreationDate="2018-01-14T07:09:19.280" Score="1" ViewCount="164" Body="&lt;p&gt;104.28.5.44 and 104.28.4.44 in blocklist. Blocked by the state because of some other sites placed on IP. Check it out here &lt;a href=&quot;http://blocklist.rkn.gov.ru/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blocklist.rkn.gov.ru/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updates OS are not available. Please move your server to clean IP.&lt;/p&gt;&#xA;" OwnerUserId="13304" LastEditorUserId="13304" LastEditDate="2018-01-14T11:00:22.430" LastActivityDate="2018-04-17T11:33:03.347" Title="elementary.io blocked in Russia" Tags="|updates|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14420" PostTypeId="2" ParentId="13844" CreationDate="2018-01-14T19:53:54.380" Score="0" Body="&lt;p&gt;The solution indeed is adding the line &lt;code&gt;video=SVIDEO-1:d&lt;/code&gt; to the kernel parameters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I achieved this now by installing rEFInd from within the Linux installation (&lt;a href=&quot;https://www.rodsbooks.com/refind/getting.html#ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-add-repository ppa:rodsmith/refind&#xA;$ sudo apt-get update&#xA;$ sudo apt-get install refind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This automatically created a file called &lt;code&gt;refind_linux.conf&lt;/code&gt; in the &lt;code&gt;/boot/EFI/refind&lt;/code&gt; directory. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Alternatively, the &lt;a href=&quot;https://www.rodsbooks.com/refind/linux.html#quickstart&quot; rel=&quot;nofollow noreferrer&quot;&gt;documentation&lt;/a&gt; states I could have created it by running the command &lt;code&gt;mkrlcnf&lt;/code&gt; which comes with the rEFInd package.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I opened the file with &lt;code&gt;sudo pico /boot/EFI/refind/refind_linux.conf&lt;/code&gt; and saw three lines &lt;strong&gt;similar&lt;/strong&gt; to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Boot with standard options&quot;  &quot;ro root=UUID=084f544a-7559-4d4b-938a-b920f59edc7e splash=silent quiet showopts &quot;&#xA;&quot;Boot to single-user mode&quot;    &quot;ro root=UUID=084f544a-7559-4d4b-938a-b920f59edc7e splash=silent quiet showopts single&quot;&#xA;&quot;Boot with minimal options&quot;   &quot;ro root=UUID=084f544a-7559-4d4b-938a-b920f59edc7e&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I simply appended &lt;code&gt;video=SVIDEO-1:d&lt;/code&gt; to the first line (before the quotes and with a leading space), rebooted and – voilà! – the speed gain is enormous!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;Boot with standard options&quot;  &quot;ro root=UUID=084f544a-7559-4d4b-938a-b920f59edc7e splash=silent quiet showopts video=SVIDEO-1:d&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12637" LastActivityDate="2018-01-14T19:53:54.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14421" PostTypeId="2" ParentId="14250" CreationDate="2018-01-15T01:02:40.433" Score="1" Body="&lt;p&gt;It is solved. I formatted an NTFS partition as ext4 and moved to it many files, so I have enough free space now. &lt;/p&gt;&#xA;" OwnerUserId="4602" LastActivityDate="2018-01-15T01:02:40.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14425" PostTypeId="2" ParentId="13983" CreationDate="2018-01-15T11:07:50.010" Score="-1" Body="&lt;p&gt;Following the instructions on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11687/fonts-looks-weird-at-loki-and-just-in-my-user-session-how-do-i-fix-it&quot;&gt;this answer&lt;/a&gt; and reseting all font-related stuff works for me.&lt;/p&gt;&#xA;" OwnerUserId="13317" LastEditorUserId="26" LastEditDate="2018-02-21T10:56:43.567" LastActivityDate="2018-02-21T10:56:43.567" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14426" PostTypeId="1" AcceptedAnswerId="14538" CreationDate="2018-01-15T11:16:04.633" Score="1" ViewCount="535" Body="&lt;p&gt;I installed drivers amd64-microcode and nvidia-340 on my Elementary OS and I restart it. Unfortunately I can't turn on my computer. I was trying in recovery mode, but it doesn't work. My copmuter screen blinks and next I see only black background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do now? How can I remove this drivers? &lt;/p&gt;&#xA;" OwnerUserId="13147" LastActivityDate="2018-01-25T08:29:26.373" Title="Nvidia and AMD drivers broke Elementary OS" Tags="|graphic-drivers|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14431" PostTypeId="1" CreationDate="2018-01-15T18:48:50.073" Score="0" ViewCount="56" Body="&lt;p&gt;I donẗ know why, but Terminal panel color is from dark theme, but everything else follow standard gray/silver color. How to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: I found that Videos media player is also dark. Is elementary OS theme broken?&lt;/p&gt;&#xA;" OwnerUserId="13003" LastEditorUserId="13003" LastEditDate="2018-01-15T22:11:33.070" LastActivityDate="2018-05-16T01:16:27.877" Title="Terminal panel color different than other" Tags="|pantheon-terminal|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14434" PostTypeId="2" ParentId="14409" CreationDate="2018-01-15T22:01:17.903" Score="1" Body="&lt;p&gt;Go here, it fixed the issue for me. Ensure you note carefully the outputs when you &lt;code&gt;grep&lt;/code&gt; using &lt;code&gt;xrandr&lt;/code&gt;. They are key to the bash script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2181/pantheon-greeter-login-screen-has-incorrect-resolution-on-external-monitor&quot;&gt;Pantheon-greeter login screen has incorrect resolution on external monitor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My code example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;Samsung=&quot;$(xrandr -q | grep 'HDMI-1 connected' | awk '{ print $1 }')&quot;&#xA;if [ &quot;$Samsung&quot; = &quot;HDMI-1&quot; ]; then&#xA;  xrandr --output LVDS1 --off&#xA;  xrandr --output HDMI-1 --primary --mode 1920x1080&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13324" LastEditorUserId="686" LastEditDate="2018-01-22T20:24:35.943" LastActivityDate="2018-01-22T20:24:35.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14435" PostTypeId="2" ParentId="14431" CreationDate="2018-01-15T22:20:32.890" Score="1" Body="&lt;p&gt;This is normal, probably it's chosen where it was deemed appropriate. For example a darker border around a Video is less &quot;distracting&quot;. Daniel Foré is working on a light theme for Terminal: &lt;a href=&quot;https://www.youtube.com/watch?v=wOAlqsA0XF0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=wOAlqsA0XF0&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure why such choices aren't covered in the Human Interface Guidelines&lt;br&gt;&#xA;&lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/human-interface-guidelines&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-15T22:20:32.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14438" PostTypeId="2" ParentId="13535" CreationDate="2018-01-16T12:49:30.320" Score="1" Body="&lt;p&gt;I also noticed it gets slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some facts so far:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.I tested it on 3 different machines, i3 All-in-One Desktop, i5 Laptop and top-notch i7 Workstation - same deal on all of them - the menu stutters for a second and then works smoothly...untill I launch it couple minutes later after doing something else. The question is, what triggers the stuttering?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.Tested both on free and proprietary drivers from nvidia - same stuttering.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.Tested on 3 different resolutions HD, FHD and UHD - same deal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.Tested on different hardrives, including SSD's - same deal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Definatley a software issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still hunting...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One trigger found:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Menu appears to stutter after checking any other place on the wingpanel first (like calendar, volume etc.).&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-01-16T14:34:05.180" LastActivityDate="2018-01-16T14:34:05.180" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14439" PostTypeId="2" ParentId="13535" CreationDate="2018-01-16T13:24:00.890" Score="1" Body="&lt;p&gt;It's a known issue: &lt;a href=&quot;https://github.com/elementary/applications-menu/issues/47&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/issues/47&lt;/a&gt;&lt;br&gt;&#xA;Should have been fixed with: &lt;a href=&quot;https://github.com/elementary/applications-menu/pull/48&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/pull/48&lt;/a&gt;&lt;br&gt;&#xA;Seeing that the latest applications-menu release was in Sep 26, 2017 this fix hasn't been released yet, see:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/applications-menu/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/releases&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can figure out the right repo, it's always interesting to check the existing issues. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-16T13:24:00.890" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14440" PostTypeId="1" CreationDate="2018-01-16T17:02:29.107" Score="0" ViewCount="429" Body="&lt;p&gt;(Posted on Ubuntu, they suggested I take my question here. xpost below)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Complete noob so forgive me. I'm setting up a relative's computer and we've installed Elemerntary OS (0.4.1 Loki) The kernel is 4.10.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Issue is the wireless networks are not showing up in the network list even though we get them all appearing in windows 10&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've done some searching. The computer is a HP notebook and the wireless is Realtek RTL8723BE. Cannot connect to Wifi at all - but funnily the extention (to wifi we want) is showing up... however is continuously dropping from one bar to zero bars. We do not have access to a wired connection right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do we do?&lt;/p&gt;&#xA;" OwnerUserId="13329" LastActivityDate="2024-03-16T22:06:00.717" Title="Wireless Networks Not appearing Elementary Loki 0.4.1" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14441" PostTypeId="1" AcceptedAnswerId="14450" CreationDate="2018-01-16T19:13:46.377" Score="0" ViewCount="1320" Body="&lt;p&gt;How to change any folder icon in pantheon-files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody know where is the config of user default folders kept in elementary? Maybe there will I find some file to edit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can't do it in properties.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want to change the theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want to use nautilus as default filemanager.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-03-21T23:05:30.540" LastActivityDate="2018-03-21T23:05:30.540" Title="How to change folder icon in pantheon-files?" Tags="|release-loki|pantheon-files|files|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14442" PostTypeId="2" ParentId="14440" CreationDate="2018-01-16T19:17:56.293" Score="0" Body="&lt;p&gt;Go to settings=&gt;network=&gt;wireless and turn wifi on there.&#xA;My Wifi wasn't working when launched from wingpanel.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-01-16T19:17:56.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14446" PostTypeId="1" AcceptedAnswerId="14458" CreationDate="2018-01-17T08:54:51.810" Score="2" ViewCount="176" Body="&lt;p&gt;I am in an office environment where making sound is not an option. My laptop used to be in mute all the time which is fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have now enabled a SIP account for phone so I need to use the laptop sound. I have paired a bluetooth headset which works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have the following issue: when the bluetooth is disconnected for any reason, the sound is reverted to the internal speakers which is absolutely not what I want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I permanently mute the internal speakers, and make that persistent to anything? I don't want the volume to come back unless I manually revert it. At the moment almost any operation on the sound configuration will re-enable the internal speakers.&lt;/p&gt;&#xA;" OwnerUserId="9692" LastActivityDate="2018-06-17T04:58:35.270" Title="Disable internal speakers by default" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14447" PostTypeId="1" CreationDate="2018-01-17T09:16:13.957" Score="1" ViewCount="143" Body="&lt;p&gt;I can add my network server (secure webDAV) in pantheon-files, but it isn't there after reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How am I able to achieve this? And why isn't this an option by default?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know about davfs2 but I was hoping it can achieved without other software, scripts are fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running fully updated elementary OS, dual boot with Windows 10.&lt;/p&gt;&#xA;" OwnerUserId="8187" LastEditorUserId="308" LastEditDate="2018-08-07T18:21:22.757" LastActivityDate="2018-09-06T22:01:42.277" Title="Pantheon-files: network server not showing after reboot" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14448" PostTypeId="2" ParentId="14416" CreationDate="2018-01-17T09:52:09.803" Score="1" Body="&lt;p&gt;I don't think they can migrate to a new IP that fast, but try calling them out on Twitter and/or filing an issue to their Github pages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the meantime, you can use a VPN (free VPN services will do since the updates probably won't take up more than 500MB) to fetch updates. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2018-01-17T09:52:09.803" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14450" PostTypeId="2" ParentId="14441" CreationDate="2018-01-17T14:58:07.440" Score="2" Body="&lt;p&gt;There is no facility to customise the icon used on a per folder basis using the Properties dialog like there is in Nautilus.  You might like to file a &quot;&quot;wishlist&quot; issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; but there is no guarantee it will be implemented.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-01-17T14:58:07.440" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14452" PostTypeId="1" CreationDate="2018-01-17T16:20:38.390" Score="0" ViewCount="2334" Body="&lt;p&gt;followed posts from Bulletmark and Neal Fennimore&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't get multi touch gestures working for desktop shifting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My process&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;git clone &lt;a href=&quot;http://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://github.com/bulletmark/libinput-gestures&lt;/a&gt;&lt;br&gt;&#xA;  cd libinput-gestures&lt;br&gt;&#xA;  sudo make install&lt;br&gt;&#xA;  sudo apt install libinput-tools xdotool&lt;br&gt;&#xA;  sudo gpasswd -a $USER input&lt;br&gt;&#xA;  libinput-gestures-setup autostart&lt;br&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get xdotool wmctrl&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then I copied the conf file&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo cp /etc/libinput-gestures.conf ~/.config/&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The edited that file&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo nano ~/.config/libinput-gestures.conf&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Added the following on the bottom,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gesture swipe down 3 xdotool super+Down&lt;br&gt;&#xA;  gesture swipe left 3 xdotool super+Left&lt;br&gt;&#xA;  gesture swipe right 3 xdotool super+Right&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After saving the file, restarting or logging off and then logging back in I don't get any workspace changing on gesture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My trackpad is capable, it two finger scrolls well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open the keyboard map its noted that my left windows button is listed as 'Super L' and when I try to remap the workspace shifter keyboard shortcut it thinks my left windows key is Super L and displays the Mac command button icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This all seems good compared to what others have posted, but I can't get it to shift workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideally I'd want 3 fingers swiping left and right to shift workspaces left and right and then 3 fingers swipe down to open the exploded multitasking view.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Matt&lt;/p&gt;&#xA;" OwnerUserId="13343" LastEditorUserId="13343" LastEditDate="2018-01-17T16:28:45.513" LastActivityDate="2019-10-06T14:02:30.377" Title="Using Multi Touch Gestures for Desktop Shifting" Tags="|release-loki|touchpad|workspace|multitasking-view|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14454" PostTypeId="1" AcceptedAnswerId="14455" CreationDate="2018-01-17T17:10:17.480" Score="1" ViewCount="242" Body="&lt;p&gt;since I couldn't spot any other reports I hope this only happened to me, but I had a pretty critical accident (at least for a GUI-only user it would have been) today. Though I mostly install and upgrade packages via &lt;code&gt;apt&lt;/code&gt; from within the terminal, I sometimes check out Appcenters recommendations and when it wants to upgrade some packages, I happily grant it the favour ;-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this time, something broke. I first noticed that &lt;code&gt;gnome-minesweeper&lt;/code&gt; had neither numbers and flags on the fields, nor were the title bar controls displayed properly. Later I noticed missing dock icons and sticky notification indicators on them (though the new mail had been read, in the case of Thunderbird), text missing from the lock screen (after putting into and waking from standby) and the Applications menu crashing wingpanel instantly (and/or causing it to restart). Apparently, the system ran fine, but the GUI seemed very damaged. In the meantime, Appcenter still showed pending system upgrades to apply while just having run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that really no one else has this problem, but just in case I want to at least show how I got back and have this as a place for discussion about how and why. It is quite likely that this was just caused by some modifications I made myself, though something like that still shouldn't happen, I guess.&lt;/p&gt;&#xA;" OwnerUserId="8580" LastActivityDate="2018-02-03T09:13:17.250" Title="Appcenter Upgrade silently fails, GUI elements like dock icons disappear, applications menu doesn't open but causes wingpanel restart" Tags="|updates|graphic-drivers|graphics|user-interface|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14455" PostTypeId="2" ParentId="14454" CreationDate="2018-01-17T17:10:17.480" Score="1" Body="&lt;p&gt;Checking &lt;code&gt;apt&lt;/code&gt; in the terminal revealed the problem: Probably connected to Spectre and Meltdown patches, some graphic driver upgrades seemed to cause dependency problems.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;[...]&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; libdrm-dev : Depends: libdrm-amdgpu1 (= 2.4.89+git1801151830.57d3d4~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA; libgl1-mesa-dri : Depends: libdrm-amdgpu1 (&amp;gt;= 2.4.89+git1801151830.57d3d4~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA; libgl1-mesa-dri:i386 : Depends: libdrm-amdgpu1:i386 (&amp;gt;= 2.4.89+git1801151830.57d3d4~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA; mesa-va-drivers : Depends: libdrm-amdgpu1 (&amp;gt;= 2.4.89+git1801151830.57d3d4~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA; mesa-vdpau-drivers : Depends: libdrm-amdgpu1 (&amp;gt;= 2.4.89+git1801151830.57d3d4~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA;E: Unmet dependencies. Try using -f.&#xA;&#xA;$ sudo apt install -f&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  geany-common libdrm-common libllvm4.0 libllvm4.0:i386 libxslt1-dev linux-headers-4.4.0-101&#xA;  linux-headers-4.4.0-101-lowlatency linux-headers-4.4.0-103 linux-headers-4.4.0-103-lowlatency linux-headers-4.4.0-104&#xA;  linux-headers-4.4.0-104-lowlatency linux-image-4.4.0-101-lowlatency linux-image-4.4.0-103-lowlatency&#xA;  linux-image-4.4.0-104-lowlatency mod-host mod-ui mod-ui-common phantomjs python-lockfile python3-pystache python3-serial&#xA;  python3-tornado&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following additional packages will be installed:&#xA;  libdrm-amdgpu1 libdrm-amdgpu1:i386&#xA;The following packages will be upgraded:&#xA;  libdrm-amdgpu1 libdrm-amdgpu1:i386&#xA;2 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.&#xA;41 not fully installed or removed.&#xA;Need to get 0 B/60,3 kB of archives.&#xA;After this operation, 20,5 kB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;(Reading database ... 656858 files and directories currently installed.)&#xA;Preparing to unpack .../libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_amd64.deb ...&#xA;De-configuring libdrm-amdgpu1:i386 (2.4.83-1~16.04.1) ...&#xA;Unpacking libdrm-amdgpu1:amd64 (2.4.89+git1801151830.57d3d4~oibaf~x) over (2.4.83-1~16.04.1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_amd64.deb (--unpack):&#xA; trying to overwrite '/usr/share/libdrm/amdgpu.ids', which is also in package libdrm-common 2.4.83-1~16.04.1&#xA;Preparing to unpack .../libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_i386.deb ...&#xA;De-configuring libdrm-amdgpu1:amd64 (2.4.83-1~16.04.1) ...&#xA;Unpacking libdrm-amdgpu1:i386 (2.4.89+git1801151830.57d3d4~oibaf~x) over (2.4.83-1~16.04.1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_i386.deb (--unpack):&#xA; trying to overwrite '/usr/share/libdrm/amdgpu.ids', which is also in package libdrm-common 2.4.83-1~16.04.1&#xA;Processing triggers for libc-bin (2.23-0ubuntu9) ...&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_amd64.deb&#xA; /var/cache/apt/archives/libdrm-amdgpu1_2.4.89+git1801151830.57d3d4~oibaf~x_i386.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After googling a bit on how to reverse such an unsuccessful ugrade, I came across &lt;a href=&quot;https://www.cyberciti.biz/howto/debian-linux/ubuntu-linux-rollback-an-apt-get-upgrade/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt; which gave me enough info to adopt for my problem. &lt;code&gt;$ grep -A 3 'Start-Date: 2018-01-17' /var/log/apt/history.log&lt;/code&gt; revealed one big chunk of text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[...]&#xA;--&#xA;Start-Date: 2018-01-17  10:05:28&#xA;Commandline: packagekit role='update-packages'&#xA;Requested-By: peter (1000)&#xA;Upgrade: libgles2-mesa:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), uget-chrome-wrapper:amd64 (2.0.6-1, 2.0.7-1), libdrm-nouveau2:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libdrm-nouveau2:i386 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), gir1.2-gdkpixbuf-2.0:amd64 (2.32.2-1ubuntu1.3, 2.32.2-1ubuntu1.4), libegl1-mesa-dev:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgdk-pixbuf2.0-0:amd64 (2.32.2-1ubuntu1.3, 2.32.2-1ubuntu1.4), libglapi-mesa:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libglapi-mesa:i386 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), mesa-common-dev:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libegl1-mesa:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), carla-git:amd64 (2:1.9.7+git20180106, 2:1.9.8+git20180116), libgbm1:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), carla-lv2:amd64 (2:1.9.7+git20180106, 2:1.9.8+git20180116), libdrm-amdgpu1:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libdrm-amdgpu1:i386 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libllvm5.0:amd64 (1:5.0-3~16.04.1, 1:5.0.1-1~oibaf~x), libllvm5.0:i386 (1:5.0-3~16.04.1, 1:5.0.1-1~oibaf~x), xserver-xorg-video-intel:amd64 (2:2.99.917+git1706071933.6babcf~gd~x, 2:2.99.917+git1801120736.26f540~oibaf~x), libwayland-egl1-mesa:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), carla-data:amd64 (2:1.9.7+git20180106, 2:1.9.8+git20180116), libgles2-mesa-dev:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), distro-info-data:amd64 (0.28ubuntu0.6, 0.28ubuntu0.7), libdrm2:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libdrm2:i386 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), carla-vst:amd64 (2:1.9.7+git20180106, 2:1.9.8+git20180116), libgl1-mesa-dev:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgl1-mesa-dri:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgl1-mesa-dri:i386 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgdk-pixbuf2.0-common:amd64 (2.32.2-1ubuntu1.3, 2.32.2-1ubuntu1.4), libgdk-pixbuf2.0-dev:amd64 (2.32.2-1ubuntu1.3, 2.32.2-1ubuntu1.4), libosmesa6:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libosmesa6:i386 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgl1-mesa-glx:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libgl1-mesa-glx:i386 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libdrm-intel1:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libdrm-intel1:i386 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libgbm-dev:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libdrm-radeon1:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), libdrm-radeon1:i386 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), mesa-vdpau-drivers:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x), libdrm-dev:amd64 (2.4.83-1~16.04.1, 2.4.89+git1801151830.57d3d4~oibaf~x), mesa-va-drivers:amd64 (17.2.4-0ubuntu1~16.04.2, 17.4~git1801160730.1cbcd7~oibaf~x)&#xA;--&#xA;[...]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I didn't have previous knowledge of this, but it didn't take long to guess (and hope) that the brackets contained &lt;code&gt;(original-version, upgrade-target-version)&lt;/code&gt;. Then I just copied this into a text editor and batch edited this to fit the format &lt;code&gt;package-name:arch=original-version package-[...]&lt;/code&gt;, so I could easily copy-paste that back into the terminal to use with &lt;code&gt;sudo apt install&lt;/code&gt; to downgrade to the versions that at least worked. But &lt;code&gt;apt&lt;/code&gt; wasn't too happy with this and complained a bit, so with the goal of just getting something through I simply removed the packages from that list again of which it couldn't find the original versions somehow.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[...]&#xA;Reading state information... Done&#xA;E: Version '2.0.6-1' for 'uget-chrome-wrapper' was not found&#xA;E: Version '2.32.2-1ubuntu1.3' for 'gir1.2-gdkpixbuf-2.0' was not found&#xA;E: Version '2.32.2-1ubuntu1.3' for 'libgdk-pixbuf2.0-0' was not found&#xA;E: Version '2:1.9.7+git20180106' for 'carla-git' was not found&#xA;E: Version '2:1.9.7+git20180106' for 'carla-lv2' was not found&#xA;E: Version '2:2.99.917+git1706071933.6babcf~gd~x' for 'xserver-xorg-video-intel' was not found&#xA;E: Version '2:1.9.7+git20180106' for 'carla-data' was not found&#xA;E: Version '0.28ubuntu0.6' for 'distro-info-data' was not found&#xA;E: Version '2:1.9.7+git20180106' for 'carla-vst' was not found&#xA;E: Version '2.32.2-1ubuntu1.3' for 'libgdk-pixbuf2.0-common' was not found&#xA;E: Version '2.32.2-1ubuntu1.3' for 'libgdk-pixbuf2.0-dev' was not found&#xA;$ sudo apt install libgles2-mesa:[...]&#xA;[...]&#xA;E: Version '2:2.99.917+git1706071933.6babcf~gd~x' for 'xserver-xorg-video-intel' was not found&#xA;E: Version '0.28ubuntu0.6' for 'distro-info-data' was not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...but finally, it let me through.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading state information... Done&#xA;libdrm-amdgpu1 is already the newest version (2.4.83-1~16.04.1).&#xA;libdrm-amdgpu1 set to manually installed.&#xA;libdrm-amdgpu1:i386 is already the newest version (2.4.83-1~16.04.1).&#xA;libdrm-amdgpu1:i386 set to manually installed.&#xA;The following packages were automatically installed and are no longer required:&#xA;  geany-common libllvm4.0 libllvm4.0:i386 libomxil-bellagio-bin libomxil-bellagio0 libxslt1-dev linux-headers-4.4.0-101&#xA;  linux-headers-4.4.0-101-lowlatency linux-headers-4.4.0-103 linux-headers-4.4.0-103-lowlatency linux-headers-4.4.0-104&#xA;  linux-headers-4.4.0-104-lowlatency linux-image-4.4.0-101-lowlatency linux-image-4.4.0-103-lowlatency&#xA;  linux-image-4.4.0-104-lowlatency mod-host mod-ui mod-ui-common phantomjs python-lockfile python3-pystache python3-serial&#xA;  python3-tornado&#xA;Use 'sudo apt autoremove' to remove them.&#xA;Recommended packages:&#xA;  libtxc-dxtn-s2tc | libtxc-dxtn-s2tc0 | libtxc-dxtn0&#xA;The following packages will be DOWNGRADED:&#xA;  libdrm-dev libdrm-intel1 libdrm-intel1:i386 libdrm-nouveau2 libdrm-nouveau2:i386 libdrm-radeon1 libdrm-radeon1:i386 libdrm2&#xA;  libdrm2:i386 libegl1-mesa libegl1-mesa-dev libgbm-dev libgbm1 libgl1-mesa-dev libgl1-mesa-dri libgl1-mesa-dri:i386&#xA;  libgl1-mesa-glx libgl1-mesa-glx:i386 libglapi-mesa libglapi-mesa:i386 libgles2-mesa libgles2-mesa-dev libllvm5.0&#xA;  libllvm5.0:i386 libosmesa6 libosmesa6:i386 libwayland-egl1-mesa mesa-common-dev mesa-va-drivers mesa-vdpau-drivers&#xA;0 upgraded, 0 newly installed, 30 downgraded, 0 to remove and 10 not upgraded.&#xA;41 not fully installed or removed.&#xA;Need to get 47,9 MB of archives.&#xA;After this operation, 59,2 MB disk space will be freed.&#xA;Do you want to continue? [Y/n] &#xA;Get:1 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 mesa-vdpau-drivers amd64 17.2.4-0ubuntu1~16.04.2 [1.718 kB]&#xA;[...]&#xA;Setting up xserver-xorg-video-intel (2:2.99.917+git1801120736.26f540~oibaf~x) ...&#xA;Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20160824-0ubuntu1) ...&#xA;Rebuilding /usr/share/applications/bamf-2.index...&#xA;Processing triggers for libc-bin (2.23-0ubuntu9) ...&#xA;$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And indeed, it worked! The GUI is back to normal, at least for now. I will be careful with upgrading for a while, but I wanted to at least share this.&lt;/p&gt;&#xA;" OwnerUserId="8580" LastActivityDate="2018-01-17T17:10:17.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14456" PostTypeId="2" ParentId="14452" CreationDate="2018-01-17T18:49:26.920" Score="0" Body="&lt;p&gt;I have just followed the instructions on &lt;a href=&quot;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&lt;/a&gt; , I have tested everything except the chapter &quot;Better tap to click&quot; and it works perfect for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only difference I found compared to the instructions you did is &lt;code&gt;libinput-gestures-setup restart&lt;/code&gt; - you have &lt;code&gt;autostart&lt;/code&gt;. I have tried with &lt;code&gt;start&lt;/code&gt; also and it works fine, probably you have to try one of these options. Also in order to work you have to log-out&gt;log-in after you add yourself into the input group - this was a notice I read on the shell when I have tried &lt;code&gt;libinput-gestures-setup start&lt;/code&gt; before logging out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-17T18:49:26.920" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14458" PostTypeId="2" ParentId="14446" CreationDate="2018-01-17T19:31:32.667" Score="2" Body="&lt;p&gt;System Settings &gt; Sound &gt; Line Out &gt; check Mute&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PwvSp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PwvSp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-01-17T19:31:32.667" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14459" PostTypeId="2" ParentId="14272" CreationDate="2018-01-17T19:52:18.410" Score="1" Body="&lt;p&gt;I do not know if it will work, but you can try to type into the elementaryOS terminal &lt;code&gt;sudo update-grub&lt;/code&gt; and check out do you have a message similar to &lt;code&gt;Found Windows Boot Manager on /dev/...&lt;/code&gt;&#xA;This is the official way to add boot entries so if it founds it probably will add it like an option. I type 'probably' because I have no experience with dual external ssd boot. Hope that helps&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-01-17T19:52:18.410" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14460" PostTypeId="1" AcceptedAnswerId="14471" CreationDate="2018-01-17T21:15:20.590" Score="0" ViewCount="223" Body="&lt;p&gt;Would like to test if my system would run on nvidia graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the hardware:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -k | grep -EA2 'VGA|3D'&#xA;00:02.0 VGA compatible controller: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller (rev 06)&#xA;DeviceName:  Onboard IGD&#xA;Subsystem Lenovo 4th Generation Core Processor Family Integrated Graphics Controller&#xA;01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)&#xA;Subsystem: Lenovo GeForce 800M&#xA;Kernel driver in use: nouveau&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, additional drivers detect only the intel hardware:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers list&#xA;intel-microcode&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Somewhere on this site, for GF800 series, it was recommended to install the nvidia-358 version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I can try to install them this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install nvidia-358&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know people had black screen problems after install. I would like to know what to do, to be able to eventually get back to current, free driver, if something fails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I dont have any grub menu while loading. It is a single-boot machine.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help highly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-01-18T22:34:39.013" LastActivityDate="2018-01-18T22:34:39.013" Title="(SOLVED) Nvidia drivers for GF 800M on Lenovo C460 All-in-One?" Tags="|release-loki|boot|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14461" PostTypeId="1" CreationDate="2018-01-17T21:53:45.490" Score="0" ViewCount="270" Body="&lt;p&gt;I need help, I use Elementary OS 0.4.1 &lt;em&gt;Loki&lt;/em&gt;. I need to install a certain program, but there's an annoying error that gives me every time i try to install ANYTHING- from the terminal,the app store,from .deb files &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/vzOnH.png&quot; alt=&quot;it gives me this error&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PLEASE HELP&lt;/p&gt;&#xA;" OwnerUserId="13346" LastEditorUserId="16827" LastEditDate="2019-01-09T10:57:00.853" LastActivityDate="2019-01-09T10:57:00.853" Title="Program installation failed" Tags="|applications|appcenter|thirdpartyapps|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14463" PostTypeId="1" CreationDate="2018-01-18T14:46:01.440" Score="1" ViewCount="418" Body="&lt;p&gt;I unlocked the firewall with a view to enabling it and adding some rules. However, I decided not to add any rules. Ever since I've unlocked however, I'm constantly getting pop-ups asking me to authenticate the root user so the firewall settings can be altered. This happens every few minutes, irrespective whether the firewall is disabled or enabled. What's the best way to stop this from happening?&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2019-11-13T18:42:01.067" Title="Firewall configuration" Tags="|firewall|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14464" PostTypeId="2" ParentId="14461" CreationDate="2018-01-18T15:58:36.057" Score="1" Body="&lt;p&gt;I am using 0.4.1 Loki.  You are installing from the terminal, so did you do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install &amp;lt;name-of-package&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You could also do a search to confirm the existence of &lt;code&gt;libgstreamer-plugins-good1.0-0&lt;/code&gt; as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-cache search libgstreamer-plugins&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I do the above my system confirms that &lt;code&gt;libgstreamer-plugins-good1.0-0&lt;/code&gt; is in the repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the above fails, maybe try a general upgrade to reset the system first, as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then try to install your package again.&lt;/p&gt;&#xA;" OwnerUserId="13351" LastActivityDate="2018-01-18T15:58:36.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14465" PostTypeId="2" ParentId="14362" CreationDate="2018-01-18T16:18:15.070" Score="1" Body="&lt;p&gt;Support for Genie is built into the Vala compiler.  You can install the Vala compiler as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install valac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From this you may compile either Vala or Genie, as, for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ valac example.gs -o example&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ./example&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also compile both Vala and Genie as, for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ valac example.vala example.gs -o example&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are feeling more intrepid, &lt;a href=&quot;https://wiki.gnome.org/Apps/Builder&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome-Builder&lt;/a&gt; is an IDE that can be used to build projects for both Vala and Genie using the Meson build system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stackoverflow has a tag for Genie; it can be found &lt;a href=&quot;https://stackoverflow.com/questions/tagged/genie&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best documentation on the internet may be found at the Elementary OS &lt;a href=&quot;https://developer.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;Developer Center&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="13351" LastActivityDate="2018-01-18T16:18:15.070" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14466" PostTypeId="1" CreationDate="2018-01-18T16:43:06.220" Score="0" ViewCount="2283" Body="&lt;p&gt;first of all i love your system and i dont this to be take as critique, just would love to have this issue fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So Im using my laptop as a dock and I work on my external monitor. I always use display option that only my external monitor is up and monitor on laptop is off. This works perfectly fine except login screen, where it displays content onto my laptop screen. Is there some configuration Im missing, or is this broken?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Love your OS guys, keep up the good work.&lt;/p&gt;&#xA;" OwnerUserId="13352" LastActivityDate="2018-02-28T21:55:06.030" Title="Login screen on main display" Tags="|release-loki|display|system|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14469" PostTypeId="2" ParentId="14466" CreationDate="2018-01-18T20:24:00.447" Score="0" Body="&lt;p&gt;I'm having the same issue on my 2 monitor desktop setup. The greeter/login appears on the non-primary monitor for login, but then corrects itself once logged in. Annoying, but a minor issue since it's so easy to work around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not an answer, but there appears to be an open issue in the LightDM/Pantheon Greeter GitHub page here: &lt;a href=&quot;https://github.com/elementary/greeter/issues/65&quot; rel=&quot;nofollow noreferrer&quot;&gt;Greeter does not respect displays settings&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this is a fork of the original LightDM or not, or what the up-streaming circumstances are, but it's a know issue. Hopefully someone will fix it someday.&lt;/p&gt;&#xA;" OwnerUserId="11985" LastActivityDate="2018-01-18T20:24:00.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14470" PostTypeId="1" CreationDate="2018-01-18T21:29:52.220" Score="1" ViewCount="275" Body="&lt;p&gt;Okay, this is almost fresh install, installed about week ago. Today I started to write my essay with Libreoffice and found that this computer freezes about every 20 min when using Libreoffice. Screen is halted about 20 seconds and then it drops to login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked into kern.log and found this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Jan 18 23:09:47 envy kernel: [  742.192714] [drm] GPU HANG: ecode 9:0:0x85dffffb, in Xorg [1039], reason: Hang on rcs0, action: reset&#xA;Jan 18 23:09:47 envy kernel: [  742.192744] drm/i915: Resetting chip after gpu hang&#xA;Jan 18 23:09:47 envy kernel: [  742.192812] [drm] RC6 on&#xA;Jan 18 23:09:55 envy kernel: [  750.181140] drm/i915: Resetting chip after gpu hang&#xA;Jan 18 23:09:55 envy kernel: [  750.181283] [drm] RC6 on&#xA;Jan 18 23:10:03 envy kernel: [  758.180982] drm/i915: Resetting chip after gpu hang&#xA;Jan 18 23:10:03 envy kernel: [  758.181150] [drm] RC6 on&#xA;Jan 18 23:10:11 envy kernel: [  766.180827] drm/i915: Resetting chip after gpu hang&#xA;Jan 18 23:10:11 envy kernel: [  766.181004] [drm] RC6 on&#xA;Jan 18 23:10:19 envy kernel: [  774.180669] drm/i915: Resetting chip after gpu hang&#xA;Jan 18 23:10:19 envy kernel: [  774.180841] [drm] RC6 on&#xA;Jan 18 23:10:30 envy gnome-session-binary[2809]: Entering running state&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Laptop is HP Envy 13-d004no, Intel based hardware mainly, i5 CPU.. etc.&#xA;Nothing special, just Elementary OS installed, Google Chrome and Mega Sync repo added. System updated today. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this related to this ongoing Intel bug? Because this is found from kenr.log, I don't think that this is Elementary bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, this is critical, because my laptop is unusable now. It's annoying when you lost your work because your WM hangs. :/&lt;/p&gt;&#xA;" OwnerUserId="13003" LastActivityDate="2019-04-14T09:02:50.567" Title="Elementary OS hangs when using libreoffice" Tags="|kernel|intel|crash|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14471" PostTypeId="2" ParentId="14460" CreationDate="2018-01-18T22:33:22.283" Score="0" Body="&lt;p&gt;I risked installing the nvidia drivers...And it paid off :D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While adding nvidia ppa I've noticed, that for GF8** series it is recommended to install the 340 driver version. Tried the latest and 358, but both were not found. Tried 340 and it got installed without any errors.&#xA;I rebooted without any blacklisting of other drivers and without messing with grub parameters. No black screen, Elementary logo stayed on its place, desktop showed up.&#xA;I guess reading information is still a good practice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;inxi output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Graphics:  Card-1: Intel 4th Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0&#xA;           Card-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] bus-ID: 01:00.0&#xA;           Display Server: X.Org 1.19.5 driver: nvidia Resolution: 1920x1080@60.59hz&#xA;           GLX Renderer: GeForce 800M/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 340.106 Direct Rendering: Yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;lspci output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)&#xA;    Subsystem: Lenovo GeForce 800M&#xA;    Kernel driver in use: nvidia&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Even my Hardware Sensors Indicator shows temp for the GF card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cXvfT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cXvfT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ladies &amp;amp; Gentleman, case closed :D&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-01-18T22:33:22.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14472" PostTypeId="2" ParentId="13644" CreationDate="2018-01-18T23:40:29.517" Score="0" Body="&lt;p&gt;I would recommend opening an issue on the app's issue queue: &#xA;&lt;a href=&quot;https://github.com/davidmhewitt/torrential/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/davidmhewitt/torrential/issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could manually select it from the file system by selecting &quot;Choose other Application&quot;, navigating to &lt;code&gt;/usr/bin/&lt;/code&gt; and selecting &lt;code&gt;com.github.davidmhewitt.torrential&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-18T23:40:29.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14473" PostTypeId="2" ParentId="14470" CreationDate="2018-01-19T00:05:05.250" Score="1" Body="&lt;p&gt;This also happens on AMD desktops too. I cannot seem to pinpoint it, and it is rather annoying. I don't really have a solution, but try adding these repos to keep up to date with your software.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:libreoffice/libreoffice-5-3&lt;/p&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Those will keep LibreOffice Stable and you video drivers up to date. If the problem continues, try using your computer with your previous kernel. I had to lock mine at 4.11.12 last week as the update made my system unusable.&lt;/p&gt;&#xA;" OwnerUserId="9052" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-01-19T00:05:05.250" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14475" PostTypeId="2" ParentId="14396" CreationDate="2018-01-19T02:15:33.527" Score="0" Body="&lt;p&gt;Ended up installing VirtualBox 5.2 following the instructions here: &lt;a href=&quot;https://www.virtualbox.org/wiki/Linux_Downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.virtualbox.org/wiki/Linux_Downloads&lt;/a&gt;&#xA;I tried using 5.2 a while ago and had some issues, but with the newer kernel they seem to be fixed. So far it's all working well.&lt;/p&gt;&#xA;" OwnerUserId="11750" LastActivityDate="2018-01-19T02:15:33.527" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14476" PostTypeId="1" CreationDate="2018-01-19T07:39:49.563" Score="1" ViewCount="321" Body="&lt;p&gt;On resume from suspend, elementary OS prompts: &quot;Authentication is required to refresh system resources&quot; - but my password doesn't get accepted by this dialog, just had to press cancel. Anyone having experience with this? Password works fine in terminal, though. &lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="308" LastEditDate="2018-08-07T18:05:26.953" LastActivityDate="2018-08-07T18:05:26.953" Title="On resume from suspend: Authentication required doesn't accept system password" Tags="|suspend|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="14483" PostTypeId="1" CreationDate="2018-01-19T22:16:31.500" Score="0" ViewCount="1134" Body="&lt;p&gt;I boot up today and tried to login. I can't do it on the main account or guest account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I updated the OS yesterday. But I have not installed any program recently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using the Nvidia drivers on my Latitude E6510&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I solve this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/DHmPW.jpg&quot; alt=&quot;only thing that I can access.&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="13367" LastActivityDate="2018-12-31T14:01:10.240" Title="Can't login after yesterday's update" Tags="|display|greeter|drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14484" PostTypeId="1" CreationDate="2018-01-19T23:56:53.860" Score="0" ViewCount="83" Body="&lt;p&gt;I have a problem after updating my drivers for the nvidia with the software update programm and at the same time I ticked a box under it saying to use my processor.It asked for a restart to take place and  after that the system starts by booting some commands instead of that e letter which was appearing and never opens up really . As soon as I try to press a button on the keyboard or move the mouse goes to suspend mode. Please somebody! &lt;/p&gt;&#xA;" OwnerUserId="13369" LastActivityDate="2019-04-16T03:02:30.403" Title="System crash on loki 4.1" Tags="|release-loki|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14485" PostTypeId="2" ParentId="13753" CreationDate="2018-01-20T09:33:29.007" Score="0" Body="&lt;p&gt;If it's the same problem I had shutdown -h now won't help. I had to edit a config file fore grup before the problem went away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/7114/why-cant-i-restart-shutdown&quot;&gt;https://askubuntu.com/questions/7114/why-cant-i-restart-shutdown&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The firs solution worked for me, but read further down in the linked page to get some more spesifics on how to edit the file.&lt;/p&gt;&#xA;" OwnerUserId="13374" LastActivityDate="2018-01-20T09:33:29.007" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14487" PostTypeId="2" ParentId="14484" CreationDate="2018-01-20T17:30:03.917" Score="1" Body="&lt;p&gt;I solved the issue quite easily finally. Opened the terminal with alt+ctrl+f1 and followed the first command to remove all nvidia from the following topic: &#xA;&lt;a href=&quot;https://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely&quot;&gt;https://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely&lt;/a&gt;&#xA;Thanks everyone for sharing his knowledge -experience!&lt;/p&gt;&#xA;" OwnerUserId="13369" LastActivityDate="2018-01-20T17:30:03.917" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14492" PostTypeId="1" CreationDate="2018-01-21T22:33:24.283" Score="0" ViewCount="118" Body="&lt;p&gt;After the first login after booting, the desktop takes about a minute or two to show up, and I can only see the mouse and the desktop background. No dock, programs, or applications.  I am using a 7200 2tb Segate harddrive, a ryzen 5 1400, and a gtx 1060 3gb with NVIDIA drivers.&lt;/p&gt;&#xA;" OwnerUserId="13393" LastActivityDate="2018-02-08T15:03:55.977" Title="ElementryOS only shows desktop background for around 1 mintute after first login" Tags="|greeter|desktop|pantheon|graphics|" AnswerCount="1" CommentCount="0" ClosedDate="2018-02-12T09:59:24.857" ContentLicense="CC BY-SA 3.0" />
  <row Id="14493" PostTypeId="1" CreationDate="2018-01-21T23:48:56.140" Score="1" ViewCount="109" Body="&lt;p&gt;elementary os hasn't been able to update for a long time now. Apt get update works, but i get a bunch of 404 errors. The errors are only for arm64 packages and im on an AMD64 system so i havnt been thinking much of that. Pulseaudio however stopped working, so i tried to purge then re-install it and now i get this error: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;Package pulseaudio is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E: Package 'pulseaudio' has no installation candidate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i stupidly then decided to purge and reinstall alsa, but same error is thrown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried removing (backed up first) my sources.list and using additional drivers to create a new one, but still no luck with installing pulse. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even added the ubuntu-audio-dev-ubuntu-ppa and the ubuntu-audio-dev-pulse-testing-xenial ppa but same error is thrown when i try to do sudo apt-get install pulseaudio. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was stuck on linux kernel 4.10, but i manually updated to 4.11 to try to get my cpu temps read by the system with no luck. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Im on ubuntu 16.04.3 and apt-get update and apt-get upgrade and apt-get dist-upgrade don't show any updates available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;App center doesn't show any updates either. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm also pretty sure there should be a new AMD microcode update available for me, i'm on version 2.?? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea where to begin fixing this because I have tried very many PPA's and mirrors etc from command lie and additional drivers gui, with no changes in results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="13395" LastActivityDate="2018-01-22T03:23:35.027" Title="apt-get is busted, linux noob" Tags="|updates|apt|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14494" PostTypeId="2" ParentId="14493" CreationDate="2018-01-22T03:23:35.027" Score="2" Body="&lt;p&gt;i fixed it by removing armhf using dpkg and restoring my apt directory by copying the entire folder from clean install media.&lt;/p&gt;&#xA;" OwnerUserId="13395" LastActivityDate="2018-01-22T03:23:35.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14495" PostTypeId="2" ParentId="5205" CreationDate="2018-01-22T05:48:06.293" Score="1" Body="&lt;p&gt;It looks like you're missing xfonts required to launch steam. You can install them with  &lt;code&gt;sudo apt-get install xfonts-75dpi&lt;/code&gt;. Then log out, log back in, and launch steam again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that fails try &lt;code&gt;sudo apt-get install xfonts-100dpi&lt;/code&gt; or &lt;code&gt;sudo apt-get install xfonts-75dpi-scalable&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="6861" LastActivityDate="2018-01-22T05:48:06.293" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14496" PostTypeId="1" AcceptedAnswerId="17075" CreationDate="2018-01-22T06:22:20.897" Score="0" ViewCount="734" Body="&lt;p&gt;Whenever I update the OS through AppCenter, my laptop freezes and becomes unresponsive to both keyboard and mouse input.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have left my computer in this state for several hours (approximately 9) only to find that the installation progress bar has not changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I shut down the computer, I can no longer boot into Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I attempt to, the screen goes black with a few seemingly meaningless letters and numbers in the top left corner (No, I did not think to write them down) so I am forced to reinstall the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have frustratingly done this about 10 times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am dual booting with Windows 10 on my brand new Dell Inspiron 15 3000 series with 7th gen AMD A9.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same problem happens if I choose to update any drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All of the apps will update just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a self proclaimed Windows master, but an amateur at using Linux distributions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have played in the terminal before with Mint and Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have never had a similar problem with either of those.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying out Elementary, and I think it is going to be my main OS from now on, but if this continues, I will never be able to update it.&lt;/p&gt;&#xA;" OwnerUserId="13397" LastEditorUserId="14940" LastEditDate="2018-11-30T20:03:32.893" LastActivityDate="2018-12-30T21:49:09.423" Title="How can I fix updating issues?" Tags="|updates|system|appcenter|apt|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14497" PostTypeId="2" ParentId="2591" CreationDate="2018-01-22T07:54:05.150" Score="2" Body="&lt;p&gt;Just figured that I should update this question - it took a while to sort out all the details, but I got compiz working very nicely on Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;                                     user@spinach&#xA;         eeeeeeeeeeeeeeeee           OS: elementary OS 0.4.1 loki&#xA;      eeeeeeeeeeeeeeeeeeeeeee        Kernel: x86_64 Linux 4.13.0-26-generic&#xA;    eeeee  eeeeeeeeeeee   eeeee      Uptime: 1h 2m&#xA;  eeee   eeeee       eee     eeee    Packages: 2167&#xA; eeee   eeee          eee     eeee   Shell: bash 4.3.48&#xA;eee    eee            eee       eee  Resolution: 3840x1080&#xA;eee   eee            eee        eee  WM: Compiz&#xA;ee    eee           eeee       eeee  WM Theme: elementary&#xA;ee    eee         eeeee      eeeeee  CPU: Intel Core i7-6700K CPU @ 4.2GHz&#xA;ee    eee       eeeee      eeeee ee  GPU: GeForce GTX 1050 Ti&#xA;eee   eeee   eeeeee      eeeee  eee  RAM: 1968MiB / 32128MiB&#xA;eee    eeeeeeeeee     eeeeee    eee &#xA; eeeeeeeeeeeeeeeeeeeeeeee    eeeee  &#xA;  eeeeeeee eeeeeeeeeeee      eeee   &#xA;    eeeee                 eeeee     &#xA;      eeeeeee         eeeeeee       &#xA;         eeeeeeeeeeeeeeeee          &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It was fairly straightforward for the most part.. but there were a couple of finicky things.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;strong&gt;compizconfig settings manager&lt;/strong&gt; AND &lt;strong&gt;compiz fusion icon&lt;/strong&gt; from the appcenter. &#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Compiz fusion icon is deprecated and doesn't do what it's supposed to do, but it does something (didn't take the time to figure out what) that makes everything work correctly. No idea why this is the case - maybe someone else can shed some light on it &lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Use &lt;code&gt;killall wingpanel; sleep .3; nohup wingpanel &amp;amp; sleep .3; nohup wingpanel --toggle-indicator app-launcher&lt;/code&gt; as a command to get to elementary's app launcher&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Getting this launcher to work was quite tricky. &lt;/li&gt;&#xA;&lt;li&gt;It has to be restarted every time it is launched from the terminal (in compiz, not in gala). It's pretty buggy but eventually I figured out a workaround&lt;/li&gt;&#xA;&lt;li&gt;You may need to change the sleep times on your machine. Make sure that wingpanel has time to fully draw itself before trying to toggle the app-launcher&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;The notification-daemon must be manually started. This is probably easiest to do with an alias when you first start compiz.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Put this in your .bashrc to fix the notification-daemon (you will need to leave the terminal running - or maybe nohup it):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;alias co='nohup compiz --replace &amp;amp; sleep 2; /usr/lib/notification-daemon/notification-daemon;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And to get back to gala:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;alias ga='nohup gala --replace &amp;amp;'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can use 'co' to switch to compiz, and 'ga' to get back to gala - let me know if you would like my compizconfig file!&lt;/p&gt;&#xA;" OwnerUserId="13399" LastEditorUserId="13399" LastEditDate="2018-01-23T03:46:28.363" LastActivityDate="2018-01-23T03:46:28.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14499" PostTypeId="2" ParentId="12787" CreationDate="2018-01-22T13:53:44.430" Score="1" Body="&lt;p&gt;Try &quot;AppEditor&quot; from Appstore - it saves you the chore of editing the *.desktop files manually, but includes that option if you still want to. When editing files manually there is always greater chance for an error. This app minimizes it. Ofcourse it can also set icons of menu entries. Very useful.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-01-22T16:54:02.480" LastActivityDate="2018-01-22T16:54:02.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14501" PostTypeId="2" ParentId="12794" CreationDate="2018-01-22T21:13:51.430" Score="-2" Body="&lt;p&gt;See &lt;a href=&quot;https://www.kernel.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.kernel.org&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mainline:   4.15-rc9&#xA;stable:     4.14.14&#xA;longterm:   4.9.77&#xA;longterm:   4.4.112&lt;/p&gt;&#xA;&#xA;&lt;p&gt;etc&lt;/p&gt;&#xA;" OwnerUserId="6194" LastActivityDate="2018-01-22T21:13:51.430" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14502" PostTypeId="2" ParentId="8405" CreationDate="2018-01-23T03:47:57.507" Score="1" Body="&lt;p&gt;I answered this question here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2591/can-you-install-compiz-on-elementary-os/14497#14497&quot;&gt;Can you install Compiz on Elementary OS?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is actually pretty easy to do! I got it to work with notifications, slingshot-launcher, wingpanel and everything else that seemed important at the time.&lt;/p&gt;&#xA;" OwnerUserId="13399" LastActivityDate="2018-01-23T03:47:57.507" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14503" PostTypeId="1" CreationDate="2018-01-23T05:12:34.037" Score="1" ViewCount="35" Body="&lt;p&gt;I have a keyboard with no super key, but would like to move between workspaces. The following steps results in a crash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(1) System Settings &gt; Keyboard &gt; Shortcuts &gt; Workspaces&#xA;(2) Press any setting (like &quot;Switch to workspace 1&quot;)&#xA;(3) Notice settings menu freezes. No applications can be pressed, even though mouse continues to be controllable. &#xA;(4) Pressing the powerbutton on the machine seems to restore settings back to normal, however the setting changes to disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshot of what seems like relevant portions of the System Logs based on timing and reported failures:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eS3T0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eS3T0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshot: &lt;a href=&quot;https://i.stack.imgur.com/5Qh3V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5Qh3V.png&quot; alt=&quot;Systems Settings screen showing disabled settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thoughts on how to resolve? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13411" LastActivityDate="2018-01-23T05:12:34.037" Title="Attempting to customize keyboard shortcuts results in reproducible crash" Tags="|keyboard-shortcuts|workspace|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14504" PostTypeId="1" CreationDate="2018-01-23T07:43:43.490" Score="0" ViewCount="721" Body="&lt;p&gt;I'm currently using loki elementary and its running very smoothly but yesterday I updated a OS update from app center after that when I restart my system and when enter my password a black screen comes and after that again my login screen appears and every time this happens and I'm unable to open my desktop screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WayLt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WayLt.jpg&quot; alt=&quot;this message is appear after entering the password and then the login screen appear again&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This message is appear after entering the password and then the login screen appear again&lt;/p&gt;&#xA;" OwnerUserId="13413" LastEditorUserId="13413" LastEditDate="2018-01-23T11:30:35.303" LastActivityDate="2024-03-21T03:04:55.627" Title="Unable to load desktop screen after entering my password" Tags="|release-loki|desktop|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14505" PostTypeId="1" CreationDate="2018-01-23T14:58:59.710" Score="3" ViewCount="621" Body="&lt;p&gt;I have the &quot;automatic adjust brightness&quot; option enabled on Power settings, but it doesn't seem work. I would like the display brightness to reduce automatically when the charger is unplugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a config file that I can edit?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Clevo N131BU with TLP and kernel 4.13 installed.&lt;/p&gt;&#xA;" OwnerUserId="5726" LastEditorUserId="84" LastEditDate="2018-05-05T23:18:20.667" LastActivityDate="2019-04-30T20:43:05.960" Title="How to auto adjust screen brightness?" Tags="|power|brightness|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14507" PostTypeId="1" CreationDate="2018-01-23T18:46:15.410" Score="1" ViewCount="63" Body="&lt;p&gt;I cannot figure out why slingshot is not showing and launching Unity 3D. I am using Elementary OS Freya. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is what I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Placed the file 'unity-editor.desktop' in '/usr/share/applications/'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The content of 'unity-editor.desktop' is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Version=0.0.0f0&#xA;Name=Unity&#xA;Exec=/usr/local/Unity/unity-editor-2017.2.0xb6Linux/Editor/Unity.sh&#xA;Icon=/usr/local/Unity/unity-editor-2017.2.0xb6Linux/unity-editor-  icon.png&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=true&#xA;Categories=Development;IDE;Application;GNOME;&#xA;MimeType=x-scheme-handler/com.unity3d.kharma;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that I made the file executable with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod -x /usr/share/applications/unity-editor.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But yet I type 'unity' in slingshot, but still Unity is not launching.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is welcome, thank you!&lt;/p&gt;&#xA;" OwnerUserId="13421" LastActivityDate="2018-01-23T18:46:15.410" Title="Slingshot does not show Unity's app icon" Tags="|applications|slingshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14508" PostTypeId="1" AcceptedAnswerId="14671" CreationDate="2018-01-23T21:05:25.740" Score="0" ViewCount="57" Body="&lt;p&gt;I have an SSD in my laptop that has elementaryOS installed to it, I want to uninstall elementaryOS so I can install Windows 7.&lt;/p&gt;&#xA;" OwnerUserId="12159" LastActivityDate="2018-02-05T16:24:02.363" Title="How to reformat my SSD while eOS is installed, so I can install W7?" Tags="|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14509" PostTypeId="1" CreationDate="2018-01-23T21:37:05.987" Score="0" ViewCount="574" Body="&lt;p&gt;I have media stored on a Synology NAS attached to my router. This is accessed by both PCs and laptops running Windows and Linux - some through a switch to the router, some wirelessly, and some via powerline adapters. In all instances where everything else is like for like the same, the Linux machines (running elementary OS) get sustained transfer speeds about 60% of the Windows machines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, my laptop which dual boots Windows 10 and eOS, when plugged directly into the same router as the NAS via an ethernet cable - on Windows gets speeds up and down in excess of 100 MB/s transferring a 3GB .mkv file. On eOS I get around 65MB/s up and around 45MB/s down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have a desktop Windows 10 PC which connects via power line adapter -&gt; router - &gt; NAS which gets uploads of around 11MB/s and downloads of around 3MB/s. On a NUC running eOS, connecting through the same powerline adapter,  I get uploads of around 5-6MB/s and downloads around 2.5MB/s. This is also true when I switch the ethernet cable over - so it's not an issue with one cable/port being of lower quality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The speeds when wired directly wired are faster than SMB1, so I doubt that's the fault. Just in case, I did try editing samba.conf to set a minimum of SMB2, to no change. However, when I set the NAS to reject SMB1 connections I was unable to mount the drives on eOS, despite it seeming unlikely to be restricted to that level based on the speeds available. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tested the eOS on powerline system using AFP to similar results. When testing with FTP I got download speeds nearer to the Windows on SMB, but for whatever reason my Synology NAS won't let me write to drive over an FTP connection and from a quick googling it looks like fixing that is more effort than it's worth when I have SMB working fine, if just marginally slower.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't figured out how to access NFS connections, which don't show up for me under Entire Network in Pantheon Files and I can't figure out the correct input to do a direct Connect to Server. The closest I come is being able to see the shared folders when setting up an NFS connection in Kodi but can't access inside any of them. Again, not something I've rushed to solve considering SMB is already working as desired.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this difference in speed just a feature of how Linux handles network shares generally, or is there some tweaking I can do to get speed parity for the bandwidth available on SMB? Do I need to be looking at making NFS work if it really bothers me? Or is this speed difference unique to eOS or perhaps my specific network set up in some way?&lt;/p&gt;&#xA;" OwnerUserId="13214" LastActivityDate="2019-12-23T23:33:55.520" Title="Slow speeds accessing NAS over SMB/AFP?" Tags="|networking|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14510" PostTypeId="2" ParentId="12791" CreationDate="2018-01-23T21:56:38.433" Score="1" Body="&lt;p&gt;Last Sunday I installed elementary OS on my wife's laptop and I noticed that too. But in my case, I just needed to wait 2 minutes and after that every time I opened AppCenter it showed me all their apps. I think it was downloading some information to show, first.&lt;/p&gt;&#xA;" OwnerUserId="13422" LastActivityDate="2018-01-23T21:56:38.433" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14511" PostTypeId="1" AcceptedAnswerId="14537" CreationDate="2018-01-23T22:34:26.340" Score="0" ViewCount="70" Body="&lt;p&gt;Is it possible to switch between apps like in Unity by Super+1..9 shortcuts? This is the fastest method to switch between them and it's not a problem to remember 5 top used applications that are placed on first positions in launcher.&lt;/p&gt;&#xA;" OwnerUserId="13423" LastActivityDate="2018-01-25T07:58:47.613" Title="Unity-like app switching by Super + 1..9?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14512" PostTypeId="1" CreationDate="2018-01-23T23:06:38.120" Score="0" ViewCount="461" Body="&lt;p&gt;I use a series of Docker containers as VMs for unit/integration testing. I have some Ansible roles which I use for configuring my elementary OS systems. (Full disclosure: I'm a SRE nerd)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to run my tests against elementary OS, I'd like to bake a Docker image for elementary. The only way I can see to do this is to base the image on Ubuntu 16.04 and somehow transform the system into elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I go about doing this? Is there a list of repositories I need to install? If I just install &lt;code&gt;elementary-desktop&lt;/code&gt;, is that all that is needed? I'm assuming that some lsb-release hacks need to happen too.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;EDIT: I'm attempting to do so &lt;a href=&quot;https://github.com/naftulikay/docker-loki-vm&quot; rel=&quot;nofollow noreferrer&quot;&gt;here on GitHub&lt;/a&gt;. Fingers crossed!&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2018-01-24T00:07:42.333" LastActivityDate="2024-03-25T15:06:50.880" Title="Transforming Ubuntu into elementary OS" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14513" PostTypeId="1" CreationDate="2018-01-23T23:56:34.740" Score="1" ViewCount="441" Body="&lt;p&gt;Does elementary OS stay up-to-date with Linux kernel like with Ubuntu 16 LTS updates?  &lt;/p&gt;&#xA;" OwnerUserId="13424" LastEditorUserId="16827" LastEditDate="2019-04-13T08:21:28.930" LastActivityDate="2019-04-13T08:23:19.700" Title="elementary OS update schedule" Tags="|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14515" PostTypeId="1" CreationDate="2018-01-24T07:51:12.000" Score="1" ViewCount="32" Body="&lt;p&gt;I can add event on Maya using two options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the plus icon from the interface&lt;/li&gt;&#xA;&lt;li&gt;(if Maya is closed) right clicking the icon from dock then selecting 'Add Event'&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But if the user interface is open, right-click and selecting 'Add Event' doesn't show the create event option. Doing this same procedure while Maya is minimized will only pop back Maya to screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this the right behavior or should I file this as a bug?&lt;/p&gt;&#xA;" OwnerUserId="13427" LastActivityDate="2018-01-24T07:51:12.000" Title="Maya Add Event not working (Right-click from dock)" Tags="|calendar|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14517" PostTypeId="2" ParentId="9776" CreationDate="2018-01-24T16:04:49.607" Score="1" Body="&lt;p&gt;There is also &lt;a href=&quot;https://appcenter.elementary.io/com.github.davidmhewitt.clipped&quot; rel=&quot;nofollow noreferrer&quot;&gt;Clipped&lt;/a&gt; which you can install directly from the App Center.&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2018-01-24T16:04:49.607" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14519" PostTypeId="1" CreationDate="2018-01-24T16:30:26.607" Score="0" ViewCount="120" Body="&lt;p&gt;For example, Chrome has it on the left whereas the settings have it on the right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5iMAo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5iMAo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="147" LastActivityDate="2018-01-24T23:39:52.087" Title="Why are some close buttons on the left and some on the right?" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14520" PostTypeId="2" ParentId="14519" CreationDate="2018-01-24T20:02:20.650" Score="1" Body="&lt;p&gt;It was because your system had more than one settings location for button-layout&#xA;With dconf editor, you can change the layout manually&#xA;/org/gnome/desktop/wm/preferences/button-layout&#xA;and here&#xA;/org/pantheon/desktop/gala/appearance/button-layout&lt;/p&gt;&#xA;" OwnerUserId="3193" LastEditorUserId="3193" LastEditDate="2018-01-24T23:39:52.087" LastActivityDate="2018-01-24T23:39:52.087" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14521" PostTypeId="1" CreationDate="2018-01-24T20:06:48.633" Score="5" ViewCount="72" Body="&lt;p&gt;I'm using Telegram and whenever I open it from the dock the window appears at its last position plus (or minus) a certain vertical offset, shifting the window slightly towards the top of the screen. Repeatedly opening and closing it moves it all the way to the top.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the position of the window stored somewhere by the OS like &lt;code&gt;gsettings&lt;/code&gt; or is this managed by the app itself?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="13435" LastEditorUserId="16827" LastEditDate="2019-01-09T10:00:34.730" LastActivityDate="2019-04-01T08:26:36.220" Title="Last window position for an app" Tags="|applications|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14522" PostTypeId="2" ParentId="9776" CreationDate="2018-01-24T20:06:52.443" Score="2" Body="&lt;p&gt;I recommended this one, my favorite clipboard manager for elementary &lt;a href=&quot;https://appcenter.elementary.io/com.github.davidmhewitt.clipped.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.davidmhewitt.clipped.desktop&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2018-01-24T20:06:52.443" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14523" PostTypeId="2" ParentId="14504" CreationDate="2018-01-24T20:43:33.347" Score="0" Body="&lt;p&gt;This particular problem is removed by updating my elementary os by&#xA;&lt;strong&gt;sudo apt update&lt;/strong&gt;&#xA;&lt;strong&gt;sudo apt full-upgrade&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="13413" LastActivityDate="2018-01-24T20:43:33.347" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14525" PostTypeId="1" CreationDate="2018-01-24T23:39:57.810" Score="0" ViewCount="1066" Body="&lt;p&gt;I tried various fixes such as using forcecompositionpipeline = on (edited /etc/x11/xorg.conf, there was no option for it in the nvidia x settings) but still the issue persists. Switching to intel graphics with the option &quot;TearFree&quot; &quot;true&quot; fixes it, but is there a way to fix it without switching? I need to work with nvidia graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes, I have updated to the latest drivers (390.12) and I have a gt 940m. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13417" LastActivityDate="2018-01-25T06:57:07.477" Title="How to fix screen tearing with nvidia?" Tags="|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14526" PostTypeId="2" ParentId="14513" CreationDate="2018-01-25T01:03:35.447" Score="2" Body="&lt;p&gt;elementary Loki 0.4.1 utilizes the hardware enablement stack provided by Ubuntu Destkop 16.04LTS. Currently, this is shipping kernel 4.13.  Elementary installs will receive kernel patches (eg, for the recent CPU CVEs) when Ubuntu does.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you already have Elementary installed, you can always run the following command to see what kernel you're running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For more on the HWE stack, see: &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12849" LastEditorUserId="16827" LastEditDate="2019-04-13T08:23:19.700" LastActivityDate="2019-04-13T08:23:19.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14527" PostTypeId="2" ParentId="14512" CreationDate="2018-01-25T01:12:24.707" Score="0" Body="&lt;p&gt;I may be misunderstanding, but it sounds like you want an Elementary base image.  You could always try rolling your own following these instructions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://docs.docker.com/engine/userguide/eng-image/baseimages/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.docker.com/engine/userguide/eng-image/baseimages/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would guess (though I don't know), that you might be able to use the mentioned debootstrap tool to create one given it also works with Ubuntu - ie, what Elementary extends.&lt;/p&gt;&#xA;" OwnerUserId="12849" LastActivityDate="2018-01-25T01:12:24.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14528" PostTypeId="1" AcceptedAnswerId="14536" CreationDate="2018-01-25T01:37:56.077" Score="0" ViewCount="1055" Body="&lt;p&gt;I'm new to the whole Linux environment. I installed Loki on my desktop and old Acer laptop about 4 months ago and everything works fine. One of the best decision I've made last year! I've setup a Windows VM on both machines and it works smoothly without a hitch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently I acquired a new Lenovo ideapad 310 and installed Loki in it. Then I imported my VM into the new laptop, but every time I hit the start button the whole system crashes, and I'm forced to perform a hard shut down if I want to turn it off. I also tried to build a new VM from scratch, but experienced the same problem, the OS crashes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a solution to this?&lt;/p&gt;&#xA;" OwnerUserId="13446" LastEditorUserId="84" LastEditDate="2018-02-04T07:32:08.273" LastActivityDate="2018-02-04T07:32:08.273" Title="Laptop crash everytime i start Windows VM on VirtualBox" Tags="|virtualization|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14530" PostTypeId="2" ParentId="14525" CreationDate="2018-01-25T02:07:57.247" Score="0" Body="&lt;p&gt;Nvidia drivers should also come with a settings application to tweak your graphic card and its settings. You may find an option in those settings to enable VSync or Sync To VBlank. I don't know of any settings in elementary settings themselves to control this unfortunately.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-01-25T02:07:57.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14532" PostTypeId="1" AcceptedAnswerId="14533" CreationDate="2018-01-25T04:21:32.957" Score="2" ViewCount="48" Body="&lt;p&gt;There's a strange problem where one of the accounts in my desktop plays media faster than normal speed. At first I thought this was a problem with the Epiphany browser, but then even the music player plays things fast. I recorded the screen to illustrate this: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://streamable.com/zza2a&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://streamable.com/zza2a&lt;/a&gt;&#xA;&lt;a href=&quot;https://streamable.com/8ex86&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://streamable.com/8ex86&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't even know where or how to begin troubleshooting this. There are three user accounts in the computer and this happens in only one of them. Please help!&lt;/p&gt;&#xA;" OwnerUserId="13448" LastActivityDate="2018-01-25T05:22:59.310" Title="Media playback faster than normal" Tags="|release-loki|pantheon|multimedia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14533" PostTypeId="2" ParentId="14532" CreationDate="2018-01-25T05:22:59.310" Score="0" Body="&lt;p&gt;System Settings -&gt; Sound -&gt; (change the output device)&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2018-01-25T05:22:59.310" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14534" PostTypeId="2" ParentId="14525" CreationDate="2018-01-25T06:57:07.477" Score="1" Body="&lt;p&gt;Finally fixed it! Followed the instructions in &lt;a href=&quot;https://www.reddit.com/r/Ubuntu/comments/6z99n7/fix_for_screen_tearing_on_nividia_optimus_prime/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Apparently, the solution isn't popular. Works like a charm! &lt;/p&gt;&#xA;" OwnerUserId="13417" LastActivityDate="2018-01-25T06:57:07.477" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14536" PostTypeId="2" ParentId="14528" CreationDate="2018-01-25T07:43:44.687" Score="0" Body="&lt;p&gt;I had this problem about two weeks ago. I haven't had the time to revisit it yet but you might find these links helpful. They boil down to two things:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Update VirtualBox to 5.2&lt;/li&gt;&#xA;&lt;li&gt;Disable 3D acceleration&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14396/virtualbox-on-loki-freezing-entire-system&quot;&gt;VirtualBox on Loki freezing entire system&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.linuxquestions.org/questions/slackware-14/virtualbox-freezes-entire-computer-4175553037/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxquestions.org/questions/slackware-14/virtualbox-freezes-entire-computer-4175553037/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13399" LastActivityDate="2018-01-25T07:43:44.687" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14537" PostTypeId="2" ParentId="14511" CreationDate="2018-01-25T07:58:47.613" Score="0" Body="&lt;p&gt;You have a couple of options.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You could use workspaces. IE keep Firefox in workspace 1, Geary-Mail in workspace 2, etc. Then you could set super+1 to take you to workspace 1, super+2 to workspace 2, and so on. To set shortcuts go to &quot;system settings &gt; keyboard &gt; shortcuts &gt; workspaces&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you do not want to use workspaces, you could use wmctrl. If you go to &quot;system settings &gt; keyboard &gt; shortcuts &gt; custom&quot; you can set a hotkey to run any terminal command. Wmctrl is able to list, raise, and lower windows from the terminal. Here is an article on how to use wmctrl (complete with a dissertation on why it is better than using workspaces) to do what you are trying to do &lt;a href=&quot;https://vickychijwani.me/blazing-fast-application-switching-in-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://vickychijwani.me/blazing-fast-application-switching-in-linux/&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13399" LastActivityDate="2018-01-25T07:58:47.613" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14538" PostTypeId="2" ParentId="14426" CreationDate="2018-01-25T08:29:26.373" Score="1" Body="&lt;p&gt;I'm so sorry, this kept me up until 3AM a few weeks ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds like your situation is slightly different than mine. I could not even get into a grub menu. So, take this with a grain of salt, but maybe it will help someone in the future. Also, if you're still having this issue, you might be able to use the chroot trick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you should try the &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2343081&quot; rel=&quot;nofollow noreferrer&quot;&gt;nomodeset fix&lt;/a&gt; to see if you can boot and purge the drivers. If you make it past grub and to a black screen, try using ctrl+alt+f1 to get on tty1. If you can get on tty1, purge the drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, if you can't make it past grub, and you can't boot into recovery mode, the first thing to do is make a live-usb with your favorite distro. After that, you could try &lt;a href=&quot;https://askubuntu.com/questions/245410/how-to-install-uninstall-a-driver-on-a-frozen-system-using-a-livecd&quot;&gt;using chroot from a live-usb&lt;/a&gt; to purge the drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, try to make a &lt;a href=&quot;http://www.fosslinux.com/1532/create-a-boot-repair-live-usb-disk-drive-in-ubuntu-linux-mint-and-elementary-os.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;bootable version of boot-repair&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a last resort, use the live-usb to copy all your important files onto an external and then use boot-repair's uninstall OS option to reinstall the operating system a few times. Be ready to &lt;a href=&quot;https://www.linux.com/learn/how-rescue-non-booting-grub-2-Linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;rescue your grub&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13399" LastActivityDate="2018-01-25T08:29:26.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14539" PostTypeId="1" AcceptedAnswerId="14582" CreationDate="2018-01-25T08:37:32.583" Score="0" ViewCount="207" Body="&lt;p&gt;I spent the whole night, testing several installation, mokutil and efibootmgr.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But grub does not load when secure boot is enabled (I am stuck on the EFI boot device selection and cannot load the disk).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am surprised that at no moment, I got the shim dialog after reboot to confirm a certificate enrollment. I would expect that as it is how it worked in my previous Fedora and openSUSE installations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there is an ubuntu certificate that looks correct:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;% efibootmgr -v&#xA;BootCurrent: 001A&#xA;Timeout: 2 seconds&#xA;BootOrder: 001A,0017,0018,0019,001B,001C,0021&#xA;Boot0000* Fedora    HD(1,GPT,9e081e7e-e008-413e-b738-5b7e1b22a95a,0x800,0x64000)/File(\EFI\fedora\shim.efi)&#xA;Boot0001* Fedora    HD(1,GPT,9f92cb1b-1114-49a3-9711-f73417ae5bf5,0x800,0x64000)/File(\EFI\fedora\shim.efi)&#xA;Boot0002* ubuntu    HD(1,GPT,32efde20-a294-468c-a7fc-44e9b179f135,0x800,0x100000)/File(\EFI\ubuntu\shimx64.efi)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any suggestion? (other than disable secure boot please, it is mandatory for my work)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also have a more specific question that would help me in my research: is the shim/grub environment tweaked by Elementary or is it stock Ubuntu stuff?&lt;/p&gt;&#xA;" OwnerUserId="13451" LastActivityDate="2018-01-29T21:03:24.283" Title="Fresh install and secure boot not working on a Thinkpad" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14540" PostTypeId="2" ParentId="14316" CreationDate="2018-01-25T23:52:24.670" Score="1" Body="&lt;p&gt;Boot from a live USB or DVD.&#xA;Then mount the drive (instructions for this abound on the net).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to your user's home folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/&amp;lt;your username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look at the contents of your &lt;code&gt;.bashrc&lt;/code&gt; file in your home folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;vi&lt;/code&gt;, &lt;code&gt;nano&lt;/code&gt;, &lt;code&gt;gedit&lt;/code&gt; or similar, edit the line in &lt;code&gt;.bashrc&lt;/code&gt; that defines the &lt;code&gt;PATH&lt;/code&gt; variable, so that it contains:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save that.&#xA;Unmount the drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should allow you to resume normal function after rebooting.&lt;/p&gt;&#xA;" OwnerUserId="13456" LastEditorUserId="84" LastEditDate="2018-02-04T07:31:55.790" LastActivityDate="2018-02-04T07:31:55.790" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14543" PostTypeId="2" ParentId="14466" CreationDate="2018-01-26T11:20:28.023" Score="2" Body="&lt;p&gt;I managed to fix this using &lt;a href=&quot;https://gist.github.com/RyanMillerC/c48d9f63f8fe386b22a7da18cf6913d2&quot; rel=&quot;nofollow noreferrer&quot;&gt;this gist by Ryan Miller&lt;/a&gt; and changing LightDM configuration file. All you need is this script (remember to change &lt;code&gt;PRIMARY_DISPLAY&lt;/code&gt; in first, according to comment):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;#&#xA;# { 2017-07-02 16:20 }&#xA;# { Ryan Miller | ryan@abstractfoc.us }&#xA;# { /usr/local/bin/correct-screen-pantheon-greeter }&#xA;# &#xA;# Set correct primary monitor for login screen when lightdm greeter starts up on Elementary OS.&#xA;&#xA;# Change this variable to your primary display (Run 'xrandr -q' to see available displays)&#xA;PRIMARY_DISPLAY='HDMI-0'&#xA;&#xA;# Get list of connected monitors&#xA;x_out=$(xrandr -q | grep -e '\( \)connected' | awk -F' ' '{ print $1 }')&#xA;&#xA;# Safety - Check if PRIMARY_DISPLAY is connected; if not, bail out of script&#xA;[[ $(grep ${PRIMARY_DISPLAY} &amp;lt;&amp;lt;&amp;lt; ${x_out}) ]] || exit 0&#xA;&#xA;# Iterate over x_out and disable all monitors except for PRIMARY_DISPLAY&#xA;for monitor in ${x_out[@]} ; do&#xA;    if [[ ${monitor} = ${PRIMARY_DISPLAY} ]] ; then&#xA;        xrandr --output ${monitor} --primary&#xA;    else&#xA;        xrandr --output ${monitor} --off&#xA;    fi&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and LightDM config file setting location of script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#{ /etc/lightdm/lightdm.conf }&#xA;[Seat:*]&#xA;greeter-setup-script=/usr/local/bin/correct-screen-pantheon-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13463" LastActivityDate="2018-01-26T11:20:28.023" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14548" PostTypeId="1" AcceptedAnswerId="14549" CreationDate="2018-01-26T19:23:21.123" Score="1" ViewCount="518" Body="&lt;p&gt;I bought an Alpha Centurion laptop that comes with a pre-installed elementaryOS, I'm using awesome window manager (&lt;a href=&quot;https://awesomewm.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://awesomewm.org/&lt;/a&gt;) and when I start elementaryOS &quot;native&quot; apps (like io.elementary.calculator, scratch-text-editor, ...) I get an ugly, big, black margin around the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the calculator over a browser window&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uws72.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uws72.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to remove/reduce the black margin?&lt;/p&gt;&#xA;" OwnerUserId="13043" LastActivityDate="2018-06-26T06:50:39.527" Title="Remove black margin from elementaryOS applications when using Awesome Window Manager" Tags="|applications|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14549" PostTypeId="2" ParentId="14548" CreationDate="2018-01-26T23:29:29.890" Score="0" Body="&lt;p&gt;Are you using a custom theme?&#xA;try this &lt;a href=&quot;http://www.webupd8.org/2015/11/fix-large-black-borders-around-header.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.webupd8.org/2015/11/fix-large-black-borders-around-header.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2018-01-26T23:29:29.890" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14550" PostTypeId="1" CreationDate="2018-01-27T00:01:14.440" Score="1" ViewCount="416" Body="&lt;p&gt;A search here at StackExchange, at Reddit &amp;amp; via Google yields no clear answer. Has anyone found a way to force list view as the default view?&lt;/p&gt;&#xA;" OwnerUserId="13471" LastActivityDate="2023-12-12T15:06:30.767" Title="Can I set list view as the default in Pantheon Files?" Tags="|release-loki|pantheon-files|default|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14551" PostTypeId="2" ParentId="14550" CreationDate="2018-01-27T00:15:02.903" Score="-2" Body="&lt;p&gt;Ask and I shall receive ... Five minutes later, I found my answer at &lt;a href=&quot;https://askubuntu.com/questions/134371/how-do-i-set-default-view-to-list-in-nautilus-file-manager&quot;&gt;https://askubuntu.com/questions/134371/how-do-i-set-default-view-to-list-in-nautilus-file-manager&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13471" LastEditorUserId="5325" LastEditDate="2018-02-09T23:39:39.903" LastActivityDate="2018-02-09T23:39:39.903" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14552" PostTypeId="2" ParentId="14550" CreationDate="2018-01-27T01:01:19.980" Score="0" Body="&lt;p&gt;You only need to click &quot;View as List&quot; and it will be your default&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gCmtH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gCmtH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2018-01-27T01:01:19.980" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14554" PostTypeId="2" ParentId="14550" CreationDate="2018-01-27T09:03:26.847" Score="0" Body="&lt;p&gt;Depending on your version, this setting may be at the new location /io/elementary/files/files/default-viewmode.  This changes to the mode of the currently active tab or last tab closed (which will be the end one if you have more than one).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tabs will restore with the mode they had when the app closed.  Default viewmode is used when you press the &lt;code&gt;+&lt;/code&gt; button to create a new tab or if you create a new tab using &lt;code&gt;&amp;lt;Ctrl&amp;gt;-T&lt;/code&gt; or the &lt;code&gt;Duplicate tab&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might like to monitor this setting with dconf-editor while using Files to see its behaviour.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-01-27T09:03:26.847" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14557" PostTypeId="2" ParentId="3548" CreationDate="2018-01-27T21:18:20.373" Score="1" Body="&lt;p&gt;You might find, depending on your hardware, that the displays panel in System Settings does not cope well with multiple monitors, especially if you periodically go about changing them as I do with a laptop (I have 3 different configurations that I work with). I found that installing ARandR was the best solution as it enables you to save the config and reload it later - you won't find it in the AppCentre but it's in the normal packages so &lt;code&gt;sudo apt install arandr&lt;/code&gt; will work from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One tip - don't expect to be able to move windows through the header bar (as you can on certain other OSes). Place your primary monitor (ie with the hearer bar) at the top of your window config. &lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-01-27T21:18:20.373" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14558" PostTypeId="1" CreationDate="2018-01-27T21:32:17.480" Score="0" ViewCount="153" Body="&lt;p&gt;Just installed Elementary on my laptop, switching from Win 10, and I was wondering if there was a way to enable touchpad controls such as swiping up to open multi-task view, swiping side to side to switch between applications?&lt;/p&gt;&#xA;" OwnerUserId="13480" LastActivityDate="2024-04-03T20:04:00.573" Title="Touch pad controls" Tags="|touchpad|laptop|microsoft-windows|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14559" PostTypeId="1" CreationDate="2018-01-28T00:12:16.793" Score="0" ViewCount="476" Body="&lt;p&gt;When installing loki 0.4.1 (fresh install) everything worked fine,but after updating my laptop my touchpad (synaptics) does not respond to touch input anymore and also when holding down any key it does not hold/repeat anymore. Been searching for an answer or fix but it seems te be related to kernel version 4.13. In my situation best thing to do updating towards a later kernel fixes the problem for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many users have complained about this but there is a short list which might be helpfull in your situation. But you have to figure that out for yourself. Below is the link from another topic (many thx for the one created it) which give you details and some fixes to get you started. Hope this will help in your case too...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/995948&quot;&gt;https://askubuntu.com/a/995948&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9757" LastActivityDate="2023-12-14T17:02:55.310" Title="Touchpad &amp; keyboard (and other) problems kernel 4.13" Tags="|updates|keyboard|touchpad|kernel|gesture|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14562" PostTypeId="1" CreationDate="2018-01-28T06:02:41.803" Score="0" ViewCount="453" Body="&lt;p&gt;Originally, I was just having trouble installing updates, but in my attempts to fix that, it would seem I am unable to install anything at all. Anytime I try to install something, I get the same list of unmet dependencies and nothing ends up getting installed. Here's what I get when  I try to update from the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt full-upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these.&#xA;The following packages have unmet dependencies:&#xA;aptitude:i386 : Depends: libapt-pkg4.12:i386 (&amp;gt;= 0.8.16~exp12ubuntu6) but it is not installable&#xA;         Depends: libboost-iostreams1.46.1:i386 (&amp;gt;= 1.46.1-1) but it is not installable&#xA;         Depends: libcwidget3:i386 but it is not installable&#xA;         Depends: libept1.4.12:i386 but it is not installable&#xA;         Depends: libncursesw5:i386 (&amp;gt;= 5.6+20070908) but it is not installed&#xA;         Depends: libsigc++-2.0-0c2a:i386 (&amp;gt;= 2.0.2) but it is not installable&#xA;         Depends: libsqlite3-0:i386 (&amp;gt;= 3.6.5) but it is not installed&#xA;         Depends: libxapian22:i386 but it is not installable&#xA;         Recommends: apt-xapian-index:i386 but it is not installable&#xA;         Recommends: libparse-debianchangelog-perl:i386 but it is not installable&#xA;libgl1-mesa-dri : Depends: libdrm-amdgpu1 (&amp;gt;= 2.4.89+git1801130630.fd9bcb~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA;libgl1-mesa-dri:i386 : Depends: libdrm-amdgpu1:i386 (&amp;gt;= 2.4.89+git1801130630.fd9bcb~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA;mesa-vdpau-drivers : Depends: libdrm-amdgpu1 (&amp;gt;= 2.4.89+git1801130630.fd9bcb~oibaf~x) but 2.4.83-1~16.04.1 is installed&#xA;ppa-purge : Depends: aptitude&#xA;E: Unmet dependencies. Try using -f.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried -f install to correct these, but it fails and returns the same list of dependencies. Thanks in advance for any help.&lt;/p&gt;&#xA;" OwnerUserId="10190" LastActivityDate="2019-04-24T13:36:27.767" Title="Unable to update or install anything due to unmet dependencies" Tags="|updates|dependencies|" AnswerCount="1" CommentCount="1" ClosedDate="2019-04-24T13:41:57.100" ContentLicense="CC BY-SA 3.0" />
  <row Id="14563" PostTypeId="2" ParentId="14562" CreationDate="2018-01-28T09:17:22.547" Score="0" Body="&lt;p&gt;Answer is in the error. Run &lt;code&gt;sudo apt-get -f install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="10077" LastActivityDate="2018-01-28T09:17:22.547" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14565" PostTypeId="1" CreationDate="2018-01-28T13:21:57.180" Score="1" ViewCount="208" Body="&lt;p&gt;I can't seem to find any way to save e-mail attachments from the Mail application. I have tried drag and drop to the desktop, but that does not seem possible. I do not see any command or icon that indicates how to save an attachment. How do I do that?&lt;/p&gt;&#xA;" OwnerUserId="13486" LastActivityDate="2024-04-06T06:01:45.200" Title="How to save Mail attachment" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14567" PostTypeId="2" ParentId="14236" CreationDate="2018-01-28T18:05:27.670" Score="0" Body="&lt;p&gt;Originally posted by divergex:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Here is the solution that worked on my Aspire 5740; In the terminal, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;when the file opens, look for the line similar to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quite splash&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and add &lt;code&gt;acpi_osi=&lt;/code&gt; to the list, so it looks like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quite splash acpi_osi=&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;save the file, then exit gedit. Next, be sure to run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to make the changes permanent. Exit the terminal and reboot.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="13057" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-02-04T07:32:02.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14569" PostTypeId="2" ParentId="14565" CreationDate="2018-01-28T19:32:59.520" Score="0" Body="&lt;p&gt;You'll achieve what you want by right click-ing on the attachement -&gt; Save As...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QViwV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QViwV.png&quot; alt=&quot;save as...&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2018-01-28T19:32:59.520" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14570" PostTypeId="2" ParentId="440" CreationDate="2018-01-28T19:53:23.800" Score="1" Body="&lt;p&gt;I am also experiencing similar problems. Disk IO pegs out at 100% until the OS crashes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Entering the following command in the terminal will allow Eclipse Oxygen to load and run properly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export SWT_GTK3=0&#xA;&#xA;./eclipse &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I believe there is a problem that Eclipse has with the GTK toolkit.This is a temporary and annoying fix; however, I am hoping for a permanent fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Editing the &lt;code&gt;eclipse.ini&lt;/code&gt; file didn't fix the problem. I still need to run the export command.&lt;/p&gt;&#xA;" OwnerUserId="13501" LastEditorUserId="84" LastEditDate="2018-02-04T07:31:17.193" LastActivityDate="2018-02-04T07:31:17.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14572" PostTypeId="1" AcceptedAnswerId="14597" CreationDate="2018-01-28T22:17:02.090" Score="1" ViewCount="423" Body="&lt;p&gt;I have searched high and low for some direction in regards to issues I'm having with a recent install of Loki on an HP laptop with suspending the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an HP Pavilion with an i5-8250 CPU, 250GB SSD, 8GB RAM, Integrated Intel Graphics and running kernel 4.13.0-32. There is no touch screen nor do I have a second monitor attached. The only attached device is a wireless USB mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue(s) I'm having is trying to suspend the OS. If I close the lid or uses the Suspend option on the Power Applet, the machine will suspend then wake up within about 3 seconds. While suspending from the opion on the Power Applet the lock screen appears after the 3 seconds. I can log in and my DE seems to be stable and in the state I left it before the suspend attempt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I am able to log completely out of the DE then use the Suspend option from the Power Applet and all works just fine. I've never seen this behavior before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications that run full-time on my DE include MEGA-Sync, Insync (GDrive Sync) a weather indicator and Redshift to adjust monitor color. My initial thought was that one of these utilities could be the culprit but even after shutting them down, the issue prevails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, in the power options within the Setting Manager, all appears to be set correctly. Also, I have my machine set to auto-suspend after one hour of inactivity and that appears to work flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something I added to the DE that is causing this or is it a hardware issue? Thanks in advance for any help!!! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I have found that by unplugging my USB mouse that the above issue is resolved. I can suspend the machine via the power applet on Wingpanel as well as shutting the lid. At this point I'm lead to believe this to be a kernel issue or a config issue. Again, any help in resolving this would be appreciated!! Thanks!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastEditorUserId="13440" LastEditDate="2018-01-30T17:20:48.993" LastActivityDate="2018-01-30T21:02:06.863" Title="Suspend Behavior on HP Laptop" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14573" PostTypeId="1" AcceptedAnswerId="14575" CreationDate="2018-01-28T23:02:28.557" Score="0" ViewCount="132" Body="&lt;p&gt;wanted to install firefox esr via the package from mozilla.com and still want to. Found an guide to do so which includes to unpack the package to /opt = &quot;sudo tar -xvjf firefox-10.0.2.tar.bz2 -C /opt&quot;. Well surprise there is no /opt in elementary loki and i really don't want to use any PPA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My Question(s)&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;does it matter where to extract the package? means do i need to create /opt?&lt;/li&gt;&#xA;&lt;li&gt;or is there another way? whats my best Option?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="13506" LastActivityDate="2018-01-28T23:50:53.497" Title="missing /opt for firefox esr install" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14574" PostTypeId="2" ParentId="14509" CreationDate="2018-01-28T23:50:39.453" Score="0" Body="&lt;p&gt;Have you tried removing the powerline adapter from the equation? I have a similar setup and one of my machines that is connected with a powerline adapter is capped at about 3.5MB/s where transfer speeds between my Synology and my directly connected (wired to the router) systems is about 65MB/s.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: I should mention that my system using the powerline adapter is a multiboot system with eOS, Ubuntu and Win10 and the 3.5MB/s xfer speed cap is persistent between each OS.&lt;/p&gt;&#xA;" OwnerUserId="13509" LastActivityDate="2018-01-28T23:50:39.453" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14575" PostTypeId="2" ParentId="14573" CreationDate="2018-01-28T23:50:53.497" Score="0" Body="&lt;p&gt;You can extract it anywhere as long as you don't create a conflict with &lt;code&gt;firefox&lt;/code&gt; dependencies. To be safe and for ease of finding its location, I recommend just putting it on &lt;code&gt;/opt&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just create the &lt;code&gt;/opt&lt;/code&gt; directory manually via terminal or file manager with root privileges. Since elementary doesn't use it by default, it's safe to put manually downloaded software in it.&lt;/p&gt;&#xA;" OwnerUserId="686" LastActivityDate="2018-01-28T23:50:53.497" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14578" PostTypeId="1" CreationDate="2018-01-29T12:04:35.863" Score="0" ViewCount="856" Body="&lt;p&gt;I've downloaded the latest &lt;a href=&quot;https://ultimaker.com/en/products/cura-software&quot; rel=&quot;nofollow noreferrer&quot;&gt;Cura AppImage&lt;/a&gt; (slicing software for 3D printing) and  I'm running the optional &lt;a href=&quot;https://github.com/AppImage/AppImageKit#appimaged-usage&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppImageD&lt;/a&gt;. This AppImageD deamon should automatically &quot;install&quot; Cura. It for example adds it to the Applications menu.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cura however isn't added to the &quot;Open with&quot; dialogs, even when viewing all applications. Even though it's .desktop file contains the following MimeTypes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;application/sla&lt;/li&gt;&#xA;&lt;li&gt;application/vnd.ms-3mfdocument&lt;/li&gt;&#xA;&lt;li&gt;application/prs.wavefront-obj&lt;/li&gt;&#xA;&lt;li&gt;image/bmp&lt;/li&gt;&#xA;&lt;li&gt;image/gif&lt;/li&gt;&#xA;&lt;li&gt;image/jpeg&lt;/li&gt;&#xA;&lt;li&gt;image/png&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm not sure what is causing this, whether it's Cura's AppImage, AppImageD or elementary OS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Relevant Cura issue: &lt;a href=&quot;https://github.com/Ultimaker/Cura/issues/2984&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Ultimaker/Cura/issues/2984&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Cura 3.2 .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Cura&#xA;GenericName=3D Printing Software&#xA;Comment=Cura converts 3D models into paths for a 3D printer. It prepares your print for maximum accuracy, minimum printing time and good reliability with many extra features that make your print come out great.&#xA;Exec=/home/peteruithoven/Downloads/Cura-3.2.0-BETA.AppImage&#xA;Icon=appimagekit_6556ba19877d41a4b187df97be42dbce_cura-icon&#xA;Terminal=false&#xA;Type=Application&#xA;MimeType=application/sla;application/vnd.ms-3mfdocument;application/prs.wavefront-obj;image/bmp;image/gif;image/jpeg;image/png;&#xA;Categories=Graphics;&#xA;Keywords=3D;Printing;&#xA;TryExec=/home/peteruithoven/Downloads/Cura-3.2.0-BETA.AppImage&#xA;X-AppImage-Comment=Generated by appimaged continuous-5-g6da6ff8&#xA;X-AppImage-Identifier=6556ba19877d41a4b187df97be42dbce&#xA;Name[en_US]=Cura 3.2 beta&#xA;X-GNOME-FullName[en_US]=Cura 3.2 beta&#xA;Comment[en_US]=Cura converts 3D models into paths for a 3D printer. It prepares your print for maximum accuracy, minimum printing time and good reliability with many extra features that make your print come out great.&#xA;NoDisplay=false&#xA;Path=&#xA;X-GNOME-UsesNotifications=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The Cura 2.7 version that's installed from the &lt;a href=&quot;https://github.com/thopiekar/Cura-packaging&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa&lt;/a&gt; is added to the &quot;View All Applications&quot; list. It's .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Cura&#xA;GenericName=3D Printing Software&#xA;Comment=Cura converts 3D models into paths for a 3D printer. It prepares your print for maximum accuracy, minimum printing time and good reliability with many extra features that make your print come out great.&#xA;Exec=/usr/bin/cura %F&#xA;TryExec=/usr/bin/cura&#xA;Icon=/usr/share/cura/resources/images/cura-icon.png&#xA;Terminal=false&#xA;Type=Application&#xA;MimeType=application/sla;application/vnd.ms-3mfdocument;application/prs.wavefront-obj;image/bmp;image/gif;image/jpeg;image/png&#xA;Categories=Graphics;&#xA;Keywords=3D;Printing;&#xA;Name[en_US]=Cura 2.7&#xA;X-GNOME-FullName[en_US]=Cura 2.7&#xA;Comment[en_US]=Cura converts 3D models into paths for a 3D printer. It prepares your print for maximum accuracy, minimum printing time and good reliability with many extra features that make your print come out great.&#xA;NoDisplay=false&#xA;Path=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-01-29T12:12:13.363" LastActivityDate="2021-07-02T13:05:51.060" Title="Open with Cura AppImage issue" Tags="|software-installation|appimage|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14579" PostTypeId="2" ParentId="14578" CreationDate="2018-01-29T13:04:39.177" Score="1" Body="&lt;p&gt;David Hewitt on Slack pointed me towards an issue, the &lt;code&gt;Exec&lt;/code&gt; of the AppImage desktop file doesn't have the &lt;code&gt;%F&lt;/code&gt; argument, meaning it can't open files. After adding it, see below, it shows up in the View All Applications list. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/home/peteruithoven/Downloads/Cura-3.2.0-BETA.AppImage %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update: After &lt;a href=&quot;https://github.com/Ultimaker/Cura/issues/2984#issuecomment-361370542&quot; rel=&quot;nofollow noreferrer&quot;&gt;more tips from David&lt;/a&gt;, this led to the following AppImageD issue: &lt;a href=&quot;https://github.com/AppImage/AppImageKit/issues/642&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/AppImage/AppImageKit/issues/642&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-01-29T23:13:03.017" LastActivityDate="2018-01-29T23:13:03.017" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14581" PostTypeId="1" CreationDate="2018-01-29T20:20:03.787" Score="0" ViewCount="598" Body="&lt;p&gt;I'm opt1ckz (Mark), I knew Daniel from DeviantART and have followed Elementary since it was an Icon Theme/Firefox Skin. I am an old school developer from Windows, started with mIRC scripting believe it or not. I then taught my self Pascal (Delphi before the .net switch) and wrote my own IRC client. Now adays I write in VS/VSCode with c# and c++. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, that's a brief history of my development abilities. The only question that I have is, is there a good IDE to write apps in the native EOS language? I've tried to work in Scratch, also several plugins with other full IDE's but I'm looking for a fully integrated IDE to work not only on code but visuals as well. I was given the name &quot;opt1ckz&quot; way back on irc.msn by some friends (who later turned out to be LulSec, go figure right...) because my Dialogs, also my own programs we're visually beautiful. I could match and surpass Microshit's Forms. Cutting to the chase, I need a fully functional visual IDE to live up to my name's sake.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks guys, I absolutely LOVE Elementary! I've been a user since 0.1 and always supported you guys on Launchpad.net.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;                       - Mark (opt1ckz, The Makeshift Martyr)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8872" LastEditorUserId="45" LastEditDate="2018-01-29T23:06:22.240" LastActivityDate="2018-01-29T23:14:34.353" Title="Is there is full IDE available for writing apps on elementary OS?" Tags="|programming|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14582" PostTypeId="2" ParentId="14539" CreationDate="2018-01-29T21:03:24.283" Score="0" Body="&lt;p&gt;Answering to myself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, /boot/efi/EFI had an ubuntu folder, but no BOOT folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created this BOOT folder and copied all the content from ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also copied shimx64.efi to bootx64.efi (not sure if this step is required).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like this now:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# ls /boot/efi/EFI/BOOT &#xA;bootx64.efi*  grub.cfg*  grubx64.efi*  grubx64.efi.bak*  mmx64.efi*  shimx64.efi*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Why this stuff was done at install time and why efibootmgr failed to update boot order remain mysteries...&lt;/p&gt;&#xA;" OwnerUserId="13451" LastActivityDate="2018-01-29T21:03:24.283" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14583" PostTypeId="2" ParentId="14581" CreationDate="2018-01-29T21:12:50.193" Score="1" Body="&lt;p&gt;You might want to try the nightly version of Gnome Builder: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I like to check in on the development of Gnome Builder from time to time, because for better or worse, I'm an IDE guy when it comes down to it. I make my living doing C# in Visual Studio...can't help it. In the past Gnome Builder hasn't been either stable, or full featured enough for my Vala development needs.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Anyways, I installed the latest Gnome Builder nightly build as per the instructions here and was able to open my existing Scratch/Code Vala project right out of the box. It builds, runs, and you even have a nice debugger built in. Really awesome.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Up until this point, I had done all my dev work with Scratch/Code, but was really sore without a debugger. If you're an IDE guy like me, give it a shot. It may just turn the tide for you eOS apps in the future.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Happy coding everyone!&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7riddi/just_fyi_gnome_builder_nightly_works_great_for/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/7riddi/just_fyi_gnome_builder_nightly_works_great_for/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But then again, Cassidy in the official elementary OS blog says: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;we use Scratch on elementary OS to build elementary OS.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;In: &lt;a href=&quot;https://medium.com/elementaryos/scratch-is-now-code-2838e03134c7&quot; rel=&quot;nofollow noreferrer&quot;&gt;Scratch is now elementary Code&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-01-29T23:14:34.353" LastActivityDate="2018-01-29T23:14:34.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14584" PostTypeId="2" ParentId="14558" CreationDate="2018-01-30T05:39:58.453" Score="0" Body="&lt;p&gt;This is what I did to my 2 elementary OS laptops. Give it a try.&#xA;&lt;a href=&quot;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12160" LastEditorUserId="15904" LastEditDate="2018-11-30T19:58:55.930" LastActivityDate="2018-11-30T19:58:55.930" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="14587" PostTypeId="1" AcceptedAnswerId="14594" CreationDate="2018-01-30T09:08:12.430" Score="3" ViewCount="3055" Body="&lt;p&gt;I'm looking for a way to have bluetooth turned off every time I start my computer, but without loosing ability to turn it on again using only switch in wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've seen many answers to similar questions recommending adding &lt;code&gt;rfkill block bluetooth&lt;/code&gt; to &lt;code&gt;/etc/rc.local&lt;/code&gt; but then I can't turn it on using switch, I have to manually unblock it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few answers said to change &lt;code&gt;InitiallyPowered&lt;/code&gt; option in &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt; but I don't have that option in that file, and adding it manually didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="13430" LastEditorUserId="13430" LastEditDate="2018-01-30T10:43:39.427" LastActivityDate="2018-01-30T18:58:52.820" Title="Turn off bluetooth on startup" Tags="|bluetooth|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14588" PostTypeId="2" ParentId="7743" CreationDate="2018-01-30T12:52:11.247" Score="1" Body="&lt;p&gt;The problem may have been solved in version 2.4. I installed it a month ago and everything works fine. &lt;/p&gt;&#xA;" OwnerUserId="5910" LastActivityDate="2018-01-30T12:52:11.247" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14589" PostTypeId="1" AcceptedAnswerId="14590" CreationDate="2018-01-30T13:50:37.750" Score="1" ViewCount="372" Body="&lt;p&gt;As the title said where can we find latest developed OS?&#xA;Developer option in website points to GitHub where I can't find any .iso.&lt;/p&gt;&#xA;" OwnerUserId="13533" LastActivityDate="2018-01-30T15:18:49.757" Title="where to find beta versions of Loki?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14590" PostTypeId="2" ParentId="14589" CreationDate="2018-01-30T15:18:49.757" Score="0" Body="&lt;p&gt;There was a post by the head of elementary on their Medium Blog from 31-Dec 2017 that gives puts forth some information of the upcoming release, Juno. Here is a link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/elementaryos/our-2017-in-review-866e0a9d0114&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/our-2017-in-review-866e0a9d0114&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last couple of paragraphs talk about Loki being in more of a maintenance mode and that they have &quot;internal alpha quality builds&quot; of Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note that this information is now a month old but may shed some light on where the elementary OS Team is in relation to Juno. I'm guessing they will make an announcement when public builds are available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps you out in one way or another but the article is a good read with clear insight to 2017 in review and as well as upcoming events and current activities.&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-01-30T15:18:49.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14591" PostTypeId="2" ParentId="14587" CreationDate="2018-01-30T15:38:32.040" Score="2" Body="&lt;p&gt;Because of where I use my laptop at times, I also needed to have the machine boot with Bluetooth off. Here is how I did it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I installed dconf-editor. This can be done via the AppCenter or at a command line by typing &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; then entering your password.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open dconf-editor from the app menu.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Navigate to org-&gt; pantheon-&gt; desktop-&gt; wingpanel-&gt; indicators-&gt; bluetooth&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Once you're there, you should see only one listing named &quot;bluetooth-enabled&quot; with a check mark in the value field. Simply un-check the box then close dconf-editor and reboot. After a reboot, you should see that the Bluetooth Icon is still on the panel but it is not enabled by default. You can click on the icon and enable when it's needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.-&lt;strong&gt;Be very careful using dconf-editor&lt;/strong&gt; as it does allow a user to make a huge number of changes and some changes can have a negative consequence in that you can do serious damage to your system. I learned that the hard way some years ago!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-01-30T15:38:32.040" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14592" PostTypeId="2" ParentId="13442" CreationDate="2018-01-30T17:13:17.123" Score="0" Body="&lt;p&gt;The Linux Thermal daemon might also be interesting to try:&lt;br&gt;&#xA;&lt;a href=&quot;https://01.org/linux-thermal-daemon/documentation/introduction-thermal-daemon&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://01.org/linux-thermal-daemon/documentation/introduction-thermal-daemon&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/PowerManagement/ThermalIssues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/PowerManagement/ThermalIssues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installation: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install thermald&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-01-30T17:13:17.123" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14593" PostTypeId="1" CreationDate="2018-01-30T18:58:02.680" Score="0" ViewCount="937" Body="&lt;p&gt;I'm using elementary OS 4.0.1. Below is the output of &lt;code&gt;xinput list-props &amp;lt;id&amp;gt;&lt;/code&gt;. Acceleration speed is set on 1.0, but it is still slow. I tried to use &lt;code&gt;xset m 2 1&lt;/code&gt;, but it gives nothing :(&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device 'Razer Razer Abyssus':&#xA;    Device Enabled (139):   1&#xA;    Coordinate Transformation Matrix (141): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&#xA;    libinput Accel Speed (274): 1.000000&#xA;    libinput Accel Speed Default (275): 0.000000&#xA;    libinput Accel Profiles Available (276):    1, 1&#xA;    libinput Accel Profile Enabled (277):   1, 0&#xA;    libinput Accel Profile Enabled Default (278):   1, 0&#xA;    libinput Natural Scrolling Enabled (279):   0&#xA;    libinput Natural Scrolling Enabled Default (280):   0&#xA;    libinput Send Events Modes Available (259): 1, 0&#xA;    libinput Send Events Mode Enabled (260):    0, 0&#xA;    libinput Send Events Mode Enabled Default (261):    0, 0&#xA;    libinput Left Handed Enabled (281): 0&#xA;    libinput Left Handed Enabled Default (282): 0&#xA;    libinput Scroll Methods Available (283):    0, 0, 1&#xA;    libinput Scroll Method Enabled (284):   0, 0, 0&#xA;    libinput Scroll Method Enabled Default (285):   0, 0, 0&#xA;    libinput Button Scrolling Button (286): 2&#xA;    libinput Button Scrolling Button Default (287): 2&#xA;    libinput Middle Emulation Enabled (288):    0&#xA;    libinput Middle Emulation Enabled Default (289):    0&#xA;    Device Node (262):  &quot;/dev/input/event10&quot;&#xA;    Device Product ID (263):    5426, 66&#xA;    libinput Drag Lock Buttons (290):   &amp;lt;no items&amp;gt;&#xA;    libinput Horizontal Scroll Enabled (291):   1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13537" LastEditorUserId="84" LastEditDate="2018-02-09T23:39:33.937" LastActivityDate="2023-12-12T02:03:55.437" Title="How to increase mouse sensitivity?" Tags="|release-loki|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14594" PostTypeId="2" ParentId="14587" CreationDate="2018-01-30T18:58:52.820" Score="1" Body="&lt;p&gt;So thanks to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/14591/13430&quot;&gt;Porshe Man's answer&lt;/a&gt; I have noticed interesting thing. &lt;code&gt;dconf&lt;/code&gt; option named &lt;code&gt;bluetooth-enabled&lt;/code&gt; stores the current value of bluetooth switch just for the purpose of setting that state at the next start, so there's no need to edit &lt;code&gt;dconf&lt;/code&gt;, just using the toggle will do exactly the same thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However it doesn't work (at least for me) when I use the &lt;code&gt;restart&lt;/code&gt; option. When I reboot my computer by shutting it down and then turning it on again it works just fine. This is the reason I thought I need some special solution - when I wanted to see if bluetooth state is remembered I used &lt;code&gt;restart&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like it's not a big problem, I will just not use &lt;code&gt;restart&lt;/code&gt; option but I guess this behavior is a bug.&lt;/p&gt;&#xA;" OwnerUserId="13430" LastActivityDate="2018-01-30T18:58:52.820" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14595" PostTypeId="2" ParentId="14593" CreationDate="2018-01-30T19:14:35.647" Score="0" Body="&lt;p&gt;Personally I use xset m 20/2 10 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;With my touchpad it gives me just the right about of sensitivity. You might need to adjust to your liking. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://wiki.archlinux.org/index.php/Mouse_acceleration&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arch Wiki&lt;/a&gt; is a good source of info for mouse acceleration. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-01-30T19:14:35.647" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="14596" PostTypeId="1" AcceptedAnswerId="14615" CreationDate="2018-01-30T19:20:56.847" Score="1" ViewCount="229" Body="&lt;p&gt;Installing the monaco font is successful but when I use it it changes to cousine. Using this font works on all other distro's i've tried except Elementary OS. It seems i'm not the only one with this issue.&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/problems-with-monaco_linux-ttf-font.384/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?threads/problems-with-monaco_linux-ttf-font.384/&lt;/a&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1477391&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1477391&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11633" LastActivityDate="2018-02-01T09:15:04.740" Title="The Monaco font doesn't work" Tags="|release-loki|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14597" PostTypeId="2" ParentId="14572" CreationDate="2018-01-30T21:02:06.863" Score="1" Body="&lt;p&gt;After looking through a multitude of posts elsewhere I was able to solve this issue. Here is what I did:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;In Terminal I typed &lt;code&gt;cat /proc/acpi/wakeup&lt;/code&gt; to identify the device that was enabled for wake-up. In my case, it is named 'XHC'.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In Terminal I then opened /etc/rc.local with admin privileges by typing &lt;code&gt;sudo scratch-text-editor /etc/rc.local&lt;/code&gt; and provided my password.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In the text editor, I added a line above &lt;code&gt;exit 0&lt;/code&gt; that reads &lt;code&gt;echo XHC &amp;gt; /proc/acpi/wakeup&lt;/code&gt; then closed/saved the file.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I restarted my machine then tried both the Suspend option in the Power menu as well as closing the lid and in both cases the machine stays suspended as it should. With the lid open while suspended a key hit wakes it and closing the lid to suspend the machine is woke-up by opening the lid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All is good!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-01-30T21:02:06.863" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14598" PostTypeId="1" CreationDate="2018-01-30T21:11:36.777" Score="0" ViewCount="64" Body="&lt;p&gt;i see double folders in home dir. one in english and one in greek my native language. english didnt get replaced?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2K2g8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2K2g8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10527" LastActivityDate="2019-08-26T00:03:15.367" Title="change default folder names to the new language" Tags="|home|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14599" PostTypeId="2" ParentId="14598" CreationDate="2018-01-30T22:18:19.287" Score="1" Body="&lt;p&gt;If at the time of creating folders with names in you native language the old ones weren't empty then you will end up with both of them. As far as I remember there is an info about it in dialog asking about creating the ones in your native language.&lt;/p&gt;&#xA;" OwnerUserId="13430" LastActivityDate="2018-01-30T22:18:19.287" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14601" PostTypeId="1" AcceptedAnswerId="14604" CreationDate="2018-01-30T23:29:41.687" Score="0" ViewCount="63" Body="&lt;p&gt;I know KDE has a widget for that, but I don't seem to find it in Elementary OS.  Any help?&lt;/p&gt;&#xA;" OwnerUserId="13529" LastEditorUserId="13529" LastEditDate="2018-02-09T03:14:06.830" LastActivityDate="2018-02-09T03:14:06.830" Title="Is there a way to turn off the mouse pad while typing on laptop? (Solved)" Tags="|laptop|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14603" PostTypeId="1" CreationDate="2018-01-31T01:37:50.750" Score="1" ViewCount="84" Body="&lt;p&gt;I recently updated my system and after rebooting I started getting an error when trying to launch appcenter about the schema not containing that key. I checked in dconf and it does in fact have that key. I have used this system for bitesize bug fixing for elementary, including appcenter but I checked to make sure there wasn't a schema file left over anywhere from that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="13542" LastActivityDate="2018-01-31T01:37:50.750" Title="Appcenter settings schema does not contain a key named 'reset-paid-apps'" Tags="|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14604" PostTypeId="2" ParentId="14601" CreationDate="2018-01-31T03:16:40.533" Score="1" Body="&lt;p&gt;Installing a Touchpad Indicator could help with this as it seemed to be a &quot;go-to fix&quot; for Ubuntu 16.04 which I used in the past.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do so, open Terminal and paste these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:atareao/atareao&#xA;sudo apt-get update&#xA;sudo apt-get install touchpad-indicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then launch touchpad-indicator from the Applications Menu which will place an indicator for your touchpad on the top panel. Click on the icon, select Preferences. You can then check 'Disable While Typing'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-01-31T03:16:40.533" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14605" PostTypeId="1" CreationDate="2018-01-31T07:06:20.240" Score="2" ViewCount="611" Body="&lt;p&gt;My laptop doesn't have &lt;kbd&gt;DEL&lt;/kbd&gt; key, so I mapped &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;BackSpace&lt;/kbd&gt; to behave as &lt;kbd&gt;DEL&lt;/kbd&gt; key. It works correctly in Scratch text editor or even in Google Chrome when I delete a text, but doesn't respond in Pantheon File Manager when I try to delete a file/folder.&lt;/p&gt;&#xA;" OwnerUserId="13427" LastActivityDate="2018-01-31T07:06:20.240" Title="How to delete a file in Pantheon File Manager?" Tags="|pantheon-files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14606" PostTypeId="1" CreationDate="2018-01-31T08:31:27.783" Score="0" ViewCount="2223" Body="&lt;p&gt;Today I'm using my laptop, but suddenly  my laptop freeze. It's happen usually because it's old laptop with low end spec.&#xA;Then I force shutdown and restart. Then I open mozilla, and got freeze again.&#xA;And I force shutdown again and restart.&#xA;And suddenly when ElementaryOs logo show when booting for 1-2 sec,  and my laptop show&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;BussyBox v1.21.1 (Ubuntu1:1.21.0-1ubuntu1) built-in shell (ash)&#xA;Enter 'help' for a list of built-in commands.&#xA;&#xA;(initramfs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And the top of it show&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*ERROR* CPU Pipe&#xA;B underrun&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or something like that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried to restart and restart again, there's no &lt;em&gt;ERROR&lt;/em&gt; CPU Pipe Anymore&#xA;Just&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;BussyBox v1.21.1 (Ubuntu1:1.21.0-1ubuntu1) built-in shell (ash)&#xA;Enter 'help' for a list of built-in commands.&#xA;&#xA;(initramfs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please help me!&#xA;I can't login to my ElementaryOS for now&lt;/p&gt;&#xA;" OwnerUserId="13546" LastActivityDate="2018-07-31T07:02:19.680" Title="*ERROR* CPU Pipe B underrun" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14607" PostTypeId="2" ParentId="11405" CreationDate="2018-01-31T12:56:42.433" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13366/mounted-windows-network-folders-do-not-show-in-open-save-box-on-native-apps/14165#14165&quot;&gt;Try this&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same kind of issue before. Many applications do not see the mounted drives so you have to make a folder link that will then look like a local folder. I would have added this as a comment but I need a higher reputation it seems. I take no credit for the solution.  &lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2018-01-31T12:56:42.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14608" PostTypeId="1" CreationDate="2018-01-31T16:25:20.600" Score="0" ViewCount="388" Body="&lt;p&gt;I posted this question in reddit a couple of days ago but I got no answer so far.  So, &lt;strong&gt;with the permission of this community, I'd like to post here the same question&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do any of you have had any issue connecting to the internet using the wireless software that comes with the OS? I have to wait for 3 hours for it to work. I can see the wireless available so the network card works (and other Linux OSes too).  but for some reason the network app lingers trying to connect and then it gets disconnected.  I had to install Wicd app from the app store. Now I don't have a problem connecting to the internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;From time to time I get lucky and when I reboot&lt;/strong&gt; when I am at the log in screen the native EOS network app works and I get connected, but 90% of the time it does not, and I end up using WICD.  &lt;strong&gt;Which works fine, but the APP store does not work at all&lt;/strong&gt; :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for the essay.  But can someone give me a hand on that? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advanced.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I know I was asked in Reddit to post screenshots of my desktop.  I went as far as to fill out a bug report on a txt file.  meaning that the following command were placed inside a file.  Example:&lt;br&gt;&#xA;&lt;strong&gt;uname -a &gt; Bugfix.txt, &#xA;dmesg &gt;&gt; Bugfix.txt, &#xA;lsusb -v &gt;&gt; Bugfix.txt&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A link to the tar file is below.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you once again for your support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://drive.google.com/file/d/1Cj9LU0RHhda9gEeu2YLsLkZErwv3yoBT/view?usp=sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://drive.google.com/file/d/1Cj9LU0RHhda9gEeu2YLsLkZErwv3yoBT/view?usp=sharing&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13529" LastEditorUserId="13529" LastEditDate="2018-02-01T00:01:09.203" LastActivityDate="2023-12-30T12:07:50.947" Title="Problem with the Network App on Elementary OS" Tags="|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14610" PostTypeId="2" ParentId="14606" CreationDate="2018-01-31T18:42:59.593" Score="1" Body="&lt;p&gt;Here is a link to a post on another Stack Exchange site that shows what has been seen as an acceptable fix for this type of error. Here is the link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/741109/ubuntu-15-10-busybox-built-in-shell-initramfs-on-every-boot&quot;&gt;“BusyBox built-in shell (initramfs)” on every boot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although it is a dated post for Ubuntu 15.10, the fix should apply in your situation as well but it will for sure get you moving in the right direction.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck and, please, post your outcome so others can use the information in the future.&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-01-31T18:42:59.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14612" PostTypeId="1" CreationDate="2018-01-31T22:35:08.597" Score="0" ViewCount="104" Body="&lt;p&gt;I have been trying to install elementary both from a DVD and USB on multiple occasions. I  chose to boot from USB or DVD  it takes me to the main screen,  I chose install, then it starts loading &#xA;A line of dots appear on the screen first and are joined with a bunch of white unidentifiable characters spanning the whole of the screen, like some kind of an error.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I keep waiting for something to happen and nothing does.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried it with mint as well.&lt;br&gt;&#xA;Tried to re-download and reinstall on a different DVD and a different USB.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Same thing.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do I do?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will add a picture of the screen when I get back home.  &lt;/p&gt;&#xA;" OwnerUserId="13550" LastActivityDate="2019-08-25T12:02:20.273" Title="Multiple tries of installing elementary fail" Tags="|system-installation|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="14614" PostTypeId="2" ParentId="14606" CreationDate="2018-02-01T04:12:10.767" Score="0" Body="&lt;p&gt;I still confuse to use comment section, so I use this section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried to boot ElementaryOS today, I got this message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[drm:intel_cpu_fifo_underrun_irq_handler[i915]] *ERROR CPU Pipe&#xA;B FIFO underrun&#xA;&#xA;BusyBox v1.21.1 (ubuntu 1:1.21.0-1ubuntu1) built-in shell (ash)&#xA;Enter 'help' for a list of built-in commands.&#xA;&#xA;(initramfs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I typed &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;exit&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then it show &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;line 322: can't open /root/dev/console: no such file&#xA;Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200&#xA;&#xA;CPU:0 PID: 1 Comm: init Not tainted 4.13.2-041302-generic #201709132057&#xA;Hardware name: Hewlett-Packard Compaq 420/1526, BIOS 68PVI Ver. F.00 02/25/2010&#xA;Call Trace:&#xA; dump_stack+0x58/0x81&#xA; panic+0x94/0x1d9&#xA; do_exit+0x9fc/0xa00&#xA; do_group_exit+0x35/0x90&#xA; SyS_exit_group+0x16/0x20&#xA; do_fast_syscall_32+0x71/0x150&#xA; entry_SYSENTER_32+0x4e/0x7c&#xA;EIP:0xb7ee5cf9&#xA;EFLAGS: 00000246 CPU: 0&#xA;EAX: ffffffda EBX: 00000002 ECX: b7d2c940 EDX: 00000000&#xA;ESI: bfc5dfa8 EDI: 00000003 EBP: bfc5dd64 ESP: bfc5da30&#xA; DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b&#xA;Kernel Offset: 0x14000000 from 0xc1000000 (relocation range: 0xc0000000-0xf83fdfff)&#xA;---[ end kernel panic - not syncing: Attempted to killinit! exitcode=0x00000200&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then I can't type anything&lt;/p&gt;&#xA;" OwnerUserId="13546" LastActivityDate="2018-02-01T04:12:10.767" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14615" PostTypeId="2" ParentId="14596" CreationDate="2018-02-01T09:15:04.740" Score="2" Body="&lt;p&gt;&lt;code&gt;sudo sed -i '/&amp;gt;Monaco/{N;N;N;s/&amp;gt;Cousine/&amp;gt;Monaco/}' /etc/fonts/conf.avail/31-croscore-elementary.conf&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13554" LastActivityDate="2018-02-01T09:15:04.740" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14616" PostTypeId="1" CreationDate="2018-02-01T09:51:11.090" Score="0" ViewCount="1153" Body="&lt;p&gt;I have a laptop HP Pavilion with Realtek wifi card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It didn't have a driver for Linux until end of last year as you can see &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new/issues/267&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;Then I installed it when it was released from this &lt;a href=&quot;https://github.com/smlinux/rtl8723de&quot; rel=&quot;nofollow noreferrer&quot;&gt;repo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked fine until I upgrade from kernel 4.13.0.25&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now if I try to go any kernel newer than that nothing on my network works.&#xA;If I open the network settings it says I'm in Airplane mode.&#xA;No Ethernet, no wifi, nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to uninstall/reinstall the driver from newer kernels, still not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;dkms status output:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bbswitch, 0.8, 4.13.0-16-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.13.0-21-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.13.0-25-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.13.0-26-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.13.0-31-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.13.0-32-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.15.0-041500-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.4.0-108-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.4.0-109-generic, x86_64: installed&#xA;bbswitch, 0.8, 4.4.0-112-generic, x86_64: installed&#xA;mt7630e, 2.1.0, 4.13.0-16-generic, x86_64: installed (WARNING! Diff between built and installed module!) (WARNING! Diff between built and installed module!)&#xA;ndiswrapper, 1.60, 4.13.0-25-generic, x86_64: installed&#xA;ndiswrapper, 1.60, 4.13.0-32-generic, x86_64: installed&#xA;nvidia-387, 387.34, 4.13.0-25-generic, x86_64: installed&#xA;nvidia-387, 387.34, 4.13.0-32-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.10.0-40-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.10.0-42-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-101-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-103-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-104-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-108-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-109-generic, x86_64: installed&#xA;rt3290sta, 2.6.0.0, 4.4.0-112-generic, x86_64: installed&#xA;rtl8723de, 5.1.1.8_21285.20171026_COEX20170111-1414, 4.13.0-32-generic, x86_64: installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any idea what could be causing this issue?&lt;/p&gt;&#xA;" OwnerUserId="12778" LastEditorUserId="12778" LastEditDate="2018-02-05T11:40:34.380" LastActivityDate="2019-02-05T11:11:57.977" Title="Wifi not working after kernel upgrade" Tags="|wifi|networking|internet|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14617" PostTypeId="2" ParentId="14608" CreationDate="2018-02-01T15:47:43.677" Score="0" Body="&lt;p&gt;I may be wrong with this train of thought but I believe there is a problem with the driver for the Atheros loading correctly. Also, if the WLAN has been spotty at best and with the App Store not able to connect you may have missed updates. Missing updates may or may not have something to do with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, at a command line, I would try grabbing all updates and rebooting the machine. Open Terminal and do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot your machine and see if your WiFi (not using WICD) will connect. If not, let's try reloading the driver and restarting the wireless. Again, in Terminal, do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -v ath9k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If your wireless still hasn't started, try one more reboot and see if it is working. Comment back with the results of the above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck and hope this helps!!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-01T15:47:43.677" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14618" PostTypeId="2" ParentId="13801" CreationDate="2018-02-01T16:24:09.963" Score="0" Body="&lt;p&gt;On elementary OS, some apps run in the background to be able to receive mail, send notifications, play music, etc. When you update or uninstall an app, anything that's currently running will actually continue to run the old version since it's pointing at the existing app in memory. To ensure something stops running, you need to completely stop the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest way to stop any old or uninstalled versions of apps is to restart your device. For Mail, you can also choose the &quot;Quit&quot; option in the menu.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2018-02-01T16:24:09.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14619" PostTypeId="2" ParentId="14616" CreationDate="2018-02-01T16:31:43.590" Score="1" Body="&lt;p&gt;WiFi issues can be a real pain. In reading your post, the card model rang a bell with me and an issue I had read about. This is not my solution in any way but rather one that I read about elsewhere. The instructions cover a card ending in 'BE' but I believe this fix will work or at least, get you moving in the right direction. I have altered the instructions to reflect your card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a simple solution put forth in the article. This is to &quot;provide non-default option for the kernel module that governs the wireless card&quot; per the article.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will want to open the &lt;em&gt;/etc/modprobe.d/rtl8723de.conf&lt;/em&gt; file in a text editor, with sudo or root permissions and add a single line then save the file and reboot. Once the above is open, add this to the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;options rtl8723de fwlps=N ips=N&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Again, once the above is added, save the file then reboot. If this solution works, once you've rebooted, wireless should be working and solid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course, there is another option which would be to update to a newer kernel such as 4.15 but I would try the above first as it is a less time consuming attempt to fix the issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please comment back and share your results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-01T16:31:43.590" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="14622" PostTypeId="1" CreationDate="2018-02-01T19:48:20.403" Score="0" ViewCount="642" Body="&lt;p&gt;Thank you for your help! I've linked my Gmail account with Pantheon-Mail on the latest Elementary OS. Emails download and I can send them no problem. My problem is that when I press A or archive, nothing happens! The emails don't delete or archive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried pressing the respective icons as well, to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system info is:&#xA;elementary OS 0.4.1 Loki&#xA;Linux 4.13.0-32-generic&#xA;GTK+ 3.18.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks!&lt;/p&gt;&#xA;" OwnerUserId="13565" LastActivityDate="2024-03-25T10:07:15.867" Title="Pantheon-mail won't archive Gmail" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14623" PostTypeId="1" AcceptedAnswerId="14629" CreationDate="2018-02-01T21:18:15.650" Score="1" ViewCount="5094" Body="&lt;p&gt;I'm trying to do &lt;code&gt;sudo apt update&lt;/code&gt;, but I'm getting this error&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Reading package lists... Done&lt;br&gt;&#xA;  E: The repository&#xA;  '&lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; xenial Release'&#xA;  does not have a Release file. N: Updating from such a repository can't&#xA;  be done securely, and is therefore disabled by default. N: See&#xA;  apt-secure(8) manpage for repository creation and user configuration&#xA;  details. E: The repository&#xA;  '&lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; xenial&#xA;  Release' does not have a Release file. N: Updating from such a&#xA;  repository can't be done securely, and is therefore disabled by&#xA;  default. N: See apt-secure(8) manpage for repository creation and user&#xA;  configuration details.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Is there anything wrong? I followed this &lt;a href=&quot;https://www.microsoft.com/net/learn/get-started/linuxubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;instruction&lt;/a&gt; to install &lt;code&gt;dotnet sdk&lt;/code&gt; but after trying to install the package failed with the error message &lt;code&gt;Cannot find the package&lt;/code&gt; I deleted the source file of &lt;code&gt;DotNet&lt;/code&gt; and then I get another error message after doing &lt;code&gt;sudo apt update&lt;/code&gt; but solved it after following this  &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1986288&quot; rel=&quot;nofollow noreferrer&quot;&gt;instruction&lt;/a&gt; and dowing &lt;code&gt;sudo rm /var/lib/apt/lists/* -vf&lt;/code&gt;&lt;br/&gt;&#xA;Now, I'm stuck with this error.&#xA;My &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; folder contains only the following files:&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;appcenter.list&lt;/li&gt;&#xA;&lt;li&gt;elementary.list&lt;/li&gt;&#xA;&lt;li&gt;patches.list&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My &lt;code&gt;Sources.list&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# deb cdrom:[elementary OS 0.4.1 _Loki_ - Stable amd64 (20170814)]/ xenial contrib main non-free&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial universe&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial universe&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://us.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;# deb-src http://sy.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu xenial partner&#xA;# deb-src http://archive.canonical.com/ubuntu xenial partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu xenial-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security universe&#xA;deb http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13566" LastEditorUserId="13566" LastEditDate="2018-02-01T22:54:29.073" LastActivityDate="2022-09-22T07:21:05.207" Title="Error Updating from such repository cannot be done securly" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14625" PostTypeId="1" CreationDate="2018-02-02T01:38:55.623" Score="3" ViewCount="5987" Body="&lt;p&gt;I'm a Linux newbie just experimenting with various distros in a VM before I go ahead and do a physical install to HDD. I previously had Ubuntu Gnome running with Plank dock and to get my Documents and Downloads folders on the dock (The way of just dragging these folders from Home folder results in a black rectangle where the contents therein are on display - an approach I dislike) I created what I think are called launchers? Where I would open Gedit and type something like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    [Desktop Entry]&#xA;    Name=Documents&#xA;    Exec=nautilus /path/to/Documentsfolder&#xA;    Type=Application&#xA;    Icon=/path/to/icon.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I saved it as .Documents.desktop (hidden) then chmod +x it in Terminal and drag it to the Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've now set up a new VM with Elementary OS and tried to recreate these steps replacing Exec=nautilus with pantheon-files. Considering the distro comes from Ubuntu I figured it would work the same but unfortunately it wasn't and I cannot get it to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can get it working with Nautilus file manager just not Pantheon Files which I want use as it is the native manager for Elementary. I've also read about contract file and tried that but with no luck (wasn't even sure it was the right approach?) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please could someone help me achieve my desired result? Thanks&lt;/p&gt;&#xA;" OwnerUserId="13568" LastEditorUserId="84" LastEditDate="2018-05-06T18:14:24.147" LastActivityDate="2018-09-06T03:15:47.180" Title="How Do I Create Desktop Launcher Files" Tags="|app-shortcuts|launcher|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14626" PostTypeId="2" ParentId="14625" CreationDate="2018-02-02T02:27:38.833" Score="0" Body="&lt;p&gt;If you want to launch Files at the particular folder you use &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pantheon-files -t /path/to/folder&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This launches Files with a new tab argument that takes a full path.&lt;/p&gt;&#xA;" OwnerUserId="13542" LastActivityDate="2018-02-02T02:27:38.833" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14629" PostTypeId="2" ParentId="14623" CreationDate="2018-02-02T07:42:58.457" Score="0" Body="&lt;p&gt;I have solved this problem after doing:&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/apt/lists/lock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I genuinely have no idea why!&#xA;I'm going to install &lt;code&gt;Arch&lt;/code&gt; instead of keep using &lt;code&gt;Elementary OS&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13566" LastActivityDate="2018-02-02T07:42:58.457" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14631" PostTypeId="1" AcceptedAnswerId="14634" CreationDate="2018-02-02T09:21:41.513" Score="1" ViewCount="3161" Body="&lt;p&gt;I have not enough experience to know if the following steps I think I have to do to update the kernel of my Elementary upto 4.15 are correct. Can somebody check it and tell me and tell me if it will work 100%:&#xA;1.- Create a directory specifictally to do this operation. For example /inux415&#xA;2. - cd /linux415&#xA;3.- Download as follow (for 64 bits of course:&#xA;-&lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-headers-&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-headers-&lt;/a&gt; 4.15.0-999_4.15.0-999.201801282100_all.deb&#xA;- &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-headers-4.15.0-999-generic_4.15.0-999.201801282100_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-headers-4.15.0-999-generic_4.15.0-999.201801282100_amd64.deb&lt;/a&gt;&#xA;- &lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-image-4.15.0-999-generic_4.15.0-999.201801282100_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2018-01-29/linux-image-4.15.0-999-generic_4.15.0-999.201801282100_amd64.deb&lt;/a&gt;&#xA;4- Install all: sudo dpkg - i *.deb&#xA;5.- Reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that somebody will help me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks and blessings.&lt;/p&gt;&#xA;" OwnerUserId="13570" LastActivityDate="2018-02-02T10:47:12.093" Title="UPDATING TO KERNEL 4.15" Tags="|updates|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14632" PostTypeId="1" CreationDate="2018-02-02T10:20:27.680" Score="1" ViewCount="488" Body="&lt;p&gt;In my elementaryOS Loki installation, the System Settings are freezing, when I try to enter Color or Sound Settings. What could be the problem?&lt;/p&gt;&#xA;" OwnerUserId="13571" LastEditorUserId="84" LastEditDate="2018-02-03T09:02:12.827" LastActivityDate="2019-05-01T13:02:25.403" Title="System Settings for Sound and Color are freezing" Tags="|release-loki|sound|color|switchboard|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14634" PostTypeId="2" ParentId="14631" CreationDate="2018-02-02T10:47:12.093" Score="3" Body="&lt;p&gt;I would recommend using Ukuu:&#xA;&lt;a href=&quot;http://www.teejeetech.in/p/ukuu-kernel-upgrade-utility.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.teejeetech.in/p/ukuu-kernel-upgrade-utility.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-02T10:47:12.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14636" PostTypeId="1" AcceptedAnswerId="14637" CreationDate="2018-02-02T20:14:32.570" Score="2" ViewCount="6307" Body="&lt;p&gt;I'm using elementary OS Loki and I was wondering how can I install the new Libreoffice 6.0, possibly also setting up the new elementary OS icons (&lt;a href=&quot;https://wiki.documentfoundation.org/ReleaseNotes/6.0#GUI&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.documentfoundation.org/ReleaseNotes/6.0#GUI&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PmRft.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PmRft.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot for your help,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Luca&lt;/p&gt;&#xA;" OwnerUserId="13239" LastEditorUserId="16827" LastEditDate="2019-04-13T08:55:25.257" LastActivityDate="2019-04-19T11:16:04.497" Title="Install Libreoffice 6.0 and new elementary OS icons" Tags="|libreoffice|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14637" PostTypeId="2" ParentId="14636" CreationDate="2018-02-02T20:43:13.883" Score="3" Body="&lt;p&gt;Here my fast reply:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1&lt;/strong&gt; Remove the installed version of Libreoffice&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get remove --purge libreoffice-core &amp;amp;&amp;amp; sudo apt-get&#xA;  autoremove&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt; Download Libreoffice 6.0 archive from the website in your Downloads folder:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.libreoffice.org/download/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.libreoffice.org/download/download/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3&lt;/strong&gt; Extract the archive, and enter:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt install -f ./~/Downloads/LibreOffice*/DEBS/*.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;As far as I can see, the elementary icons set is the default one!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Luca&lt;/p&gt;&#xA;" OwnerUserId="13239" LastEditorUserId="3018" LastEditDate="2018-03-30T10:47:41.710" LastActivityDate="2018-03-30T10:47:41.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14638" PostTypeId="2" ParentId="49" CreationDate="2018-02-03T06:58:37.000" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/quassy/elementary-scripts/blob/master/enable-openasroot.sh#L5&quot; rel=&quot;nofollow noreferrer&quot;&gt;This script&lt;/a&gt; works on elementary OS Loki to add &quot;Open folder as root&quot; option via &lt;code&gt;pkexec&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To use it, first create a contractor entry:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo touch /usr/share/contractor/folder-openasroot.contract&#xA;gksudo scratch-text-editor /usr/share/contractor/folder-openasroot.contract&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then edit it like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]  &#xA;Name=Open folder as root  &#xA;Icon=pantheon-files  &#xA;Description=Open folder as root  &#xA;MimeType=inode;  &#xA;Exec=pantheon-files-pkexec %U  &#xA;Gettext-Domain=pantheon-files  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then via terminal run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo &quot;#!/bin/sh&#xA;pkexec \&quot;/usr/bin/pantheon-files\&quot; \&quot;\$@\&quot;&quot; &amp;gt; /usr/bin/pantheon-files-pkexec'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13578" LastEditorUserId="13578" LastEditDate="2018-02-03T17:29:41.877" LastActivityDate="2018-02-03T17:29:41.877" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14639" PostTypeId="2" ParentId="8020" CreationDate="2018-02-03T07:43:49.980" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/quassy/elementary-scripts/blob/master/enable-openasroot.sh#L5&quot; rel=&quot;nofollow noreferrer&quot;&gt;This script&lt;/a&gt; works on elementary OS Loki to add &quot;Open folder as root&quot; option via &lt;code&gt;pkexec&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="13578" LastEditorUserId="13578" LastEditDate="2018-02-03T17:42:04.707" LastActivityDate="2018-02-03T17:42:04.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14642" PostTypeId="2" ParentId="14632" CreationDate="2018-02-03T10:28:04.523" Score="1" Body="&lt;p&gt;&lt;del&gt;There is a change that's caused by the German translation.&#xA;I would recommend testing this again in the English language,&lt;/del&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I now understand that the settings still freezed in english, so it's not a translation issue. I would recommend starting the System Settings from the terminal with debug enabled:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ switchboard --debug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hopefully that shows useful errors. You could then include that in your question and open issues in the specific switchboard plug repositories. (Switchboard is the System Settings application, every &quot;page&quot; is a &quot;plug&quot;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would recommend starting with the sound plug, since that one is build and maintained by elementary OS. &#xA;Sound plug repository: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-sound&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-sound&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm actually not sure where the code lives for that color plug, seems like it's older, not following the regular elementary OS visual style. Maybe other people know more.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I understand from Adam Bieńkowski that the color plug is part of the GNOME control center.&lt;br&gt;&#xA;I think that code lives here: &lt;a href=&quot;https://github.com/GNOME/gnome-control-center&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/GNOME/gnome-control-center&lt;/a&gt;&lt;br&gt;&#xA;And issues should probably be reported here: &lt;a href=&quot;https://bugzilla.gnome.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org&lt;/a&gt;&lt;br&gt;&#xA;Probably to the project &quot;gnome-control-center&quot; and the component &quot;Color&quot;:&lt;br&gt;&#xA;&lt;a href=&quot;https://bugzilla.gnome.org/buglist.cgi?quicksearch=component%3AColor%20product%3A%22gnome-control-center%22%20&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/buglist.cgi?quicksearch=component%3AColor%20product%3A%22gnome-control-center%22%20&lt;/a&gt;&lt;br&gt;&#xA;(Damn that site makes me so happy elementary OS is on Github)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 2: This sounds a bit like: &lt;a href=&quot;https://github.com/elementary/switchboard/issues/53&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard/issues/53&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-02-04T00:18:49.367" LastActivityDate="2018-02-04T00:18:49.367" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="14644" PostTypeId="1" CreationDate="2018-02-03T12:00:40.730" Score="0" ViewCount="334" Body="&lt;p&gt;I need some help installing a Huion graphic tablet on Loki. elementary OS does have some wacom tablet settings, but when I plug my Huion, nothing happens — I mean, it reads its memory card, but when I move the pen over the workspace it doesn't affect the mouse pointer at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit#&#xA;Installing DEB package of DIGImend didn't help at all. Still same problem. Version of kernel I'm running is: 4.10.0-32-generic.&lt;/p&gt;&#xA;" OwnerUserId="13582" LastEditorUserId="13582" LastEditDate="2018-02-05T07:19:21.543" LastActivityDate="2024-01-07T03:01:25.173" Title="How do I install a Huion 1060+ on Loki?" Tags="|release-loki|tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14645" PostTypeId="2" ParentId="8586" CreationDate="2018-02-03T13:45:03.393" Score="1" Body="&lt;p&gt;if they are bubble notification you can always turn them off in setting&gt;notifications.&lt;/p&gt;&#xA;" OwnerUserId="13586" LastActivityDate="2018-02-03T13:45:03.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14646" PostTypeId="2" ParentId="9741" CreationDate="2018-02-03T13:47:14.107" Score="1" Body="&lt;p&gt;You can also try to force update the app stream by using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo appstreamcli refresh-cache --force&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13586" LastActivityDate="2018-02-03T13:47:14.107" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14651" PostTypeId="2" ParentId="11415" CreationDate="2018-02-03T20:58:15.303" Score="1" Body="&lt;p&gt;I found a good workaround: just restart the window manager. The command is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gala -r &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;[EDIT]&#xA;One problem after this is that the wingpanel (the top panel of the desktop) doesn't turn black for maximized windows. The solution is to simply kill it and it gets restarted automatically:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="154" LastEditorUserId="154" LastEditDate="2018-02-12T12:48:36.003" LastActivityDate="2018-02-12T12:48:36.003" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14652" PostTypeId="2" ParentId="367" CreationDate="2018-02-03T23:22:13.017" Score="0" Body="&lt;p&gt;To uniqely record every new command is tricky. First you need to add to&#xA;&lt;code&gt;~/.profile&lt;/code&gt; or similar:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HISTCONTROL=erasedups&#xA;PROMPT_COMMAND='history -w'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you need to add to &lt;code&gt;~/.bash_logout&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;history -a&#xA;history -w&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13595" LastEditorUserId="13595" LastEditDate="2018-06-30T22:46:40.843" LastActivityDate="2018-06-30T22:46:40.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14653" PostTypeId="2" ParentId="14644" CreationDate="2018-02-04T02:48:50.600" Score="0" Body="&lt;p&gt;What you may be looking for can be found on the GitHub page for DIGImend which is here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/DIGImend/digimend-kernel-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/DIGImend/digimend-kernel-drivers&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read through this page as it explains quite a bit in regards to drivers and such but notes there is an experimental DEB package. That DEB package can be found under the 'Releases' section of the page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have had experience with Wacom tablets and once I had the drivers installed I was good to go. Not sure if this will be the case here but it would be a good place to start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!! &lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-04T02:48:50.600" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14654" PostTypeId="2" ParentId="8952" CreationDate="2018-02-04T08:23:31.507" Score="0" Body="&lt;p&gt;One way to fix a similar problem is to restart the window manager, which causes it to redraw the desktop. Open a terminal window and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nohup gala -r &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;-r&lt;/code&gt; flag means replace and the ampersand means to run this in the background process. You can then safely close the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure if this would help OP's problem, because changing the background image fixes part of the issues for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One problem after this is that the wingpanel (the top panel of the desktop) doesn't turn black for maximized windows. The solution is to simply kill it and it gets restarted automatically:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="154" LastEditorUserId="154" LastEditDate="2018-02-12T20:35:45.853" LastActivityDate="2018-02-12T20:35:45.853" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="14655" PostTypeId="1" AcceptedAnswerId="14656" CreationDate="2018-02-04T16:03:23.290" Score="0" ViewCount="423" Body="&lt;p&gt;I am trying to install Soundnode (a soundcloud client for linux). I ran the following in terminal as directed in their website.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;curl -s &lt;a href=&quot;https://packagecloud.io/install/repositories/JonasGroeger/soundnode/script.deb.sh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packagecloud.io/install/repositories/JonasGroeger/soundnode/script.deb.sh&lt;/a&gt; | sudo bash&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;But when i do so i get the following error&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Unable to download repo config from: &lt;a href=&quot;https://packagecloud.io/install/repositories/JonasGroeger/soundnode/config_file.list?os=elementary&amp;amp;dist=loki&amp;amp;source=script&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packagecloud.io/install/repositories/JonasGroeger/soundnode/config_file.list?os=elementary&amp;amp;dist=loki&amp;amp;source=script&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This usually happens if your operating system is not supported by&#xA;packagecloud.io, or this script's OS detection failed.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I am a linux newbie and don't know what all that means.&lt;/p&gt;&#xA;&lt;p&gt;Can you help me here? If a solution to the above problem is not obvious, then there is a linux 64 bit zip file available at their site &lt;a href=&quot;http://www.soundnodeapp.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.soundnodeapp.com&lt;/a&gt;. Can you tell me how to install from this if above method is not possible?&lt;/p&gt;&#xA;" OwnerUserId="13602" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-02-04T16:35:36.460" Title="Installing Soundnode in elementary os loki" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14656" PostTypeId="2" ParentId="14655" CreationDate="2018-02-04T16:35:36.460" Score="0" Body="&lt;p&gt;This is a common issue where application installation scripts don't support Ubuntu based distro's like elementary OS. Like the error mentions:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;This usually happens if your operating system is not supported by &#xA;  packagecloud.io, or this script's OS detection failed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;You can override the OS detection by setting os= and dist= prior to running this script.&#xA;  You can find a list of supported OSes and distributions on our website: &lt;a href=&quot;https://packagecloud.io/docs#os_distro_version&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packagecloud.io/docs#os_distro_version&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;For example, to force Ubuntu Trusty: os=ubuntu dist=trusty ./script.sh&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is already an issue opened: &lt;a href=&quot;https://github.com/Soundnode/soundnode-app/issues/1008&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Soundnode/soundnode-app/issues/1008&lt;/a&gt;&#xA;It contains the following workaround: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -s https://packagecloud.io/install/repositories/JonasGroeger/soundnode/script.deb.sh | sudo os=ubuntu dist=xenial bash&#xA;sudo apt-get update&#xA;sudo apt-get install soundnode&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Tip in general: check the application's issue queue)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully they will provide a Snap / Flatpack / AppImage. Then you wouldn't have this issue. Also see: &#xA;&lt;a href=&quot;https://github.com/Soundnode/soundnode-app/issues/984&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Soundnode/soundnode-app/issues/984&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-04T16:35:36.460" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14657" PostTypeId="2" ParentId="8952" CreationDate="2018-02-04T17:44:08.113" Score="0" Body="&lt;p&gt;Similar problem comes to me every time when my computer returns from suspend. With all recommended NVIDIA drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot say that it is a nice solution, but I found that there's no problem if I switch to the Intel GPU(Power Saving Mode) from the NVIDIA X Server Settings app. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/oBxXH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oBxXH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-02-04T17:44:08.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14658" PostTypeId="1" CreationDate="2018-02-04T18:20:55.240" Score="0" ViewCount="790" Body="&lt;p&gt;I installed elementary OS in my Asus Vivobook S15 with 2GB NVidia MX150.&#xA;Everything is well with elementary OS. But Windows - there is a problem.&#xA;If I change the UEFI settings for Windows Boot Manager, Windows 10 loads fine. But if I have Ubuntu boot manager selected and I pick Windows Boot manager from grub, Windows loads with 800x600 resolution and it is disabled in properties so that I cant change it. Any idea?&lt;/p&gt;&#xA;" OwnerUserId="13606" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:48.257" LastActivityDate="2019-05-08T10:04:48.257" Title="Dual boot with Windows 10 - Windows resolution stuck at 800x600" Tags="|dual-boot|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14660" PostTypeId="1" CreationDate="2018-02-04T19:20:34.093" Score="0" ViewCount="829" Body="&lt;p&gt;I just tried to run an update and got this message from the app center:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UHEKL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UHEKL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried reading around but all the potential answers I've found go over my head. I'm not really sure what I'm doing re: messing with repositories. Does it seem like a line has somehow been changed in sources.list? What should be there?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon suggestion, I tried&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo ppa-purge ppa:versable/elementary-update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;And I got:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;W: The repository '&lt;a href=&quot;http://ppa.launchpad.net/versable/elementary-update/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/versable/elementary-update/ubuntu&lt;/a&gt; xenial Release' does not have a Release file.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;E: Failed to fetch &lt;a href=&quot;http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/xenial/main/binary-amd64/Packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/xenial/main/binary-amd64/Packages&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;404  Not Found&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;E: Some index files failed to download. They have been ignored, or old ones used instead.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Warning:  apt-get update failed for some reason&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help.&lt;/p&gt;&#xA;" OwnerUserId="13609" LastEditorUserId="13609" LastEditDate="2018-02-06T11:16:17.183" LastActivityDate="2018-02-06T11:16:17.183" Title="The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release' does not have a Release file" Tags="|updates|repositories|" AnswerCount="1" CommentCount="0" ClosedDate="2018-02-12T09:55:10.193" ContentLicense="CC BY-SA 3.0" />
  <row Id="14663" PostTypeId="2" ParentId="14660" CreationDate="2018-02-04T20:03:11.050" Score="0" Body="&lt;p&gt;Looks like you've installed the following third party ppa: &lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would recommend removing it using ppa-purge:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ppa-purge&#xA;sudo ppa-purge ppa:versable/elementary-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you don't want to remove the packages that you've installed with this ppa you should contact them. But it looks like the project is no longer maintained, but then again I have a hard time understanding Launchpad. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-04T20:03:11.050" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="14664" PostTypeId="2" ParentId="13060" CreationDate="2018-02-04T20:19:07.973" Score="1" Body="&lt;p&gt;@bitseater's answer should fix the issue, but to get to the bottom of this issue I would recommend people experiencing this issue to help out in the following issue:&#xA;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/565&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/565&lt;/a&gt;&#xA;More information on what might have caused the issue would be very welcome. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-04T20:19:07.973" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14671" PostTypeId="2" ParentId="14508" CreationDate="2018-02-05T16:24:02.363" Score="0" Body="&lt;p&gt;Insert your W7 ISO CD/USB, boot from it, when you see the &quot;install windows7&quot; sign, press SHIFT+10. That will open command prompt windows. Now, type the following.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;diskpart&lt;/strong&gt; &gt;&#xA;&lt;strong&gt;list&lt;/strong&gt; &gt;&#xA;&lt;strong&gt;select disk 0&lt;/strong&gt; &gt;&#xA;&lt;strong&gt;clean&lt;/strong&gt; (one by one)&#xA;Once the operation completed, you can close cmd window, and can continue with the w7 installation process. What it does is it formats the entire disk in ext format to FAT format. Windows cannot read ext format. Remember that this operation will completely wipe your disk. Hope my answer helps you. :)&lt;/p&gt;&#xA;" OwnerUserId="13619" LastActivityDate="2018-02-05T16:24:02.363" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14674" PostTypeId="1" AcceptedAnswerId="14682" CreationDate="2018-02-06T06:41:02.700" Score="3" ViewCount="4996" Body="&lt;p&gt;I was downloading OS updates as per usual while working, and when I finished working I realized the installation had gotten stuck. I was trying to install another package and wanted to use &lt;code&gt;apt&lt;/code&gt;, which meant access to &lt;code&gt;dpkg&lt;/code&gt;. After frustrating myself trying to cancel the update and try again, I tried &lt;code&gt;dpkg --configure -a&lt;/code&gt;, to no avail. Finally, I ran &lt;code&gt;killall dpkg&lt;/code&gt; against better judgment. I was able to restart dpkg and install my package, but now when I go to install OS updates again I'm confronted with the following message:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/NajAW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NajAW.png&quot; alt=&quot;There Was An Error Installing Operating System Updates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I safe to move on and expect the next updates to arrive normally? If not, what can I do to fix this?&lt;/p&gt;&#xA;" OwnerUserId="8741" LastActivityDate="2018-07-18T15:58:06.923" Title="Error installing OS updates -- &quot;Too few items to process&quot;" Tags="|updates|apt|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14675" PostTypeId="2" ParentId="13060" CreationDate="2018-02-06T06:50:01.243" Score="3" Body="&lt;p&gt;I do not have enough rep to comment on answers. So here it goes. That oneliner does the trick for you or anyone in same situation&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find /etc/apt/sources.list.d/ -type f -exec sed -i.bak -e 's/loki/xenial/' '{}' \;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13269" LastEditorUserId="11882" LastEditDate="2019-06-24T19:47:34.647" LastActivityDate="2019-06-24T19:47:34.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14676" PostTypeId="2" ParentId="14393" CreationDate="2018-02-06T08:26:25.330" Score="1" Body="&lt;p&gt;I managed to solve my own problem, in the end. Basically XFCE had nothing to do with it and I was just not waiting enough time for the desktop to show (see &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1599110/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this bug&lt;/a&gt;), hence re-logging in multiple times was working after a while because the desktop environment had enough time to be ready. After realizing this, &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7t5j79/logging_in_takes_24_mintutes/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this post&lt;/a&gt; on reddit helped with solving that problem.&lt;/p&gt;&#xA;" OwnerUserId="13170" LastActivityDate="2018-02-06T08:26:25.330" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14677" PostTypeId="1" CreationDate="2018-02-06T10:33:45.083" Score="0" ViewCount="74" Body="&lt;p&gt;I installed xscreensaver after having an issue that my laptop suddenly didn't enter sleep mode automatically anymore, and after an initial period where all remained fine, I noticed my login window being changed, the photo appearing square and the login form roughened, then after rebooting, I noticed many interface changes; I installed the app using the AppCenter. Which thus did mess up many visual elements (icons, window decorations, and such). How can I restore the interface to normal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A similar issue has been reported &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11265/screensaver-installation&quot;&gt;here&lt;/a&gt;, with another screensaver app, mate.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2023-12-09T12:02:55.303" Title="Installation of xscreensaver messing up interface" Tags="|suspend|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14678" PostTypeId="2" ParentId="14677" CreationDate="2018-02-06T10:53:25.617" Score="0" Body="&lt;p&gt;The answer apparently lies in the interface tweaks. I have it installed on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open system settings &gt; tweaks &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;GTK+ &gt; Elementary  &lt;/li&gt;&#xA;&lt;li&gt;Icons &gt; Elementary&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Restores the interface to the original settings. Though, I don't know the reason the settings were changed by xscreensaver, nor if the fix is permanent, but it does the job.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2018-02-06T10:53:25.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14679" PostTypeId="1" CreationDate="2018-02-06T16:06:23.233" Score="1" ViewCount="1151" Body="&lt;p&gt;I got elementary OS and found that although my device (Lenovo Flex 10) though has a 64-bit processor it does not support 64-bit UEFI and has no legacy boot options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found how to solve a similar problem, but with a different OS. Can someone explain how to follow these instructions for elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.rkblog.rk.edu.pl/w/p/how-cool-lenovo-flex-10-netbook-and-how-install-linux-32-bit-uefi-system/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.rkblog.rk.edu.pl/w/p/how-cool-lenovo-flex-10-netbook-and-how-install-linux-32-bit-uefi-system/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/bzrcn.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="13629" LastEditorUserId="26" LastEditDate="2018-02-21T10:41:55.077" LastActivityDate="2020-11-26T11:42:59.793" Title="How can I install elementary OS on a 64-bit system that only supports 32-bit UEFI?" Tags="|uefi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14680" PostTypeId="1" CreationDate="2018-02-06T18:55:00.267" Score="1" ViewCount="3940" Body="&lt;p&gt;When I click on the icon in the dock it only bounces. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open it via Cerebro it only opens a blank panel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Trjbc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Trjbc.png&quot; alt=&quot;Clicking &amp;#39;All Settings&amp;#39; does nothing&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's really hard to use an OS with no settings. Please help!&lt;/p&gt;&#xA;" OwnerUserId="13620" LastActivityDate="2018-09-05T01:01:21.433" Title="Why can't I open system settings?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14681" PostTypeId="1" AcceptedAnswerId="14704" CreationDate="2018-02-06T19:25:18.303" Score="0" ViewCount="199" Body="&lt;p&gt;I just updated my elementary OS install, and now Xorg does not work.  I am able to make it into the login screen, but when trying to sign in it goes back to the sign-in form.  So I decided to try &lt;code&gt;Control+Alt+F1&lt;/code&gt; to log in to the terminal, which I can.  But when trying to start X, it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinit: server error&#xA;Xauth: timeout in locking authority file /home/pookito/.Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This file seems to me a binary file or something.  When I run &lt;code&gt;ls -l .Xauthority&lt;/code&gt;, I can see that root can read and write to it, but that's it. If I try to do &lt;code&gt;cat . Xauthority&lt;/code&gt;, something about magic-cookie in all caps comes up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/rNpv8.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="13529" LastEditorUserId="84" LastEditDate="2018-05-06T17:15:26.793" LastActivityDate="2018-05-06T17:15:26.793" Title="X does not work after the update (Solved)" Tags="|greeter|xorg|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="14682" PostTypeId="2" ParentId="14674" CreationDate="2018-02-06T19:29:12.053" Score="2" Body="&lt;p&gt;I think so, I believe that is just the way that EOS says you are up to date.   When that happened to me I was able to update without a problem later on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS, I am not an authority in EOS I am speaking from experience.  &lt;/p&gt;&#xA;" OwnerUserId="13529" LastActivityDate="2018-02-06T19:29:12.053" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14683" PostTypeId="2" ParentId="14680" CreationDate="2018-02-06T19:35:02.953" Score="1" Body="&lt;p&gt;I helped an individual on Reddit with a problem kinda close to what you've got happening and it ended up being an issue with broken packages in the end. Try the following in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, lets's try to reinstall Switchboard with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get install --reinstall switchboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once this is done, let's do a update via the command line with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once the above is done, give the machine a reboot and try opening System Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that didn't do it, we can try fixing broken packages (if there are any). Open Terminal and do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -f install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Again, maybe not needed but good to do, reboot the box once again. Now, try System Settings again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue I helped another elementary user with stemmed from what we believed was system interaction while updates were applying. A good practice is that when updates are being applied through AppCenter is to close down all open apps, apply updates without any machine interaction then do a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a link to the Reddit discussion &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7ubt2u/extreme_noob_here_cant_open_system_settings/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!!!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-06T19:35:02.953" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14687" PostTypeId="2" ParentId="8849" CreationDate="2018-02-07T03:58:30.653" Score="1" Body="&lt;p&gt;Do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal. Type: &lt;code&gt;sudo apt-get install dconf-tools&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hit Enter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing dconf-tools, on screen (desktop), click on &lt;code&gt;Applications&lt;/code&gt; (top left of the screen), then find and click on &lt;code&gt;dconf Editor&lt;/code&gt; (normally the logo is a Magnifying glass with a checked red box)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;strong&gt;dconf Editor&lt;/strong&gt;, go to: &lt;code&gt;org &amp;gt; gnome &amp;gt; settings-daemon &amp;gt; plugins &amp;gt; power&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click on the value of &lt;code&gt;button-power&lt;/code&gt; and choose &lt;code&gt;shutdown&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13567" LastEditorUserId="578" LastEditDate="2018-02-07T07:45:42.037" LastActivityDate="2018-02-07T07:45:42.037" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14688" PostTypeId="1" AcceptedAnswerId="14689" CreationDate="2018-02-07T08:58:11.590" Score="0" ViewCount="133" Body="&lt;p&gt;AfterShot says they support Ubuntu 16.04, but the below installation results in an icon that doesn't launch. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says libgstreamer is not installed, but according to Synaptic, it is.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;????  :~/Downloads$ sudo dpkg -i AfterShotPro3.deb&#xA;[sudo] password for ???:          &#xA;Selecting previously unselected package aftershot3x64.&#xA;(Reading database ... 191523 files and directories currently installed.)&#xA;Preparing to unpack AfterShotPro3.deb ...&#xA;Unpacking aftershot3x64 (340297:3.4.0.297) ...&#xA;dpkg: dependency problems prevent configuration of aftershot3x64:&#xA; aftershot3x64 depends on libgstreamer0.10-0; however:&#xA;  Package libgstreamer0.10-0 is not installed.&#xA; aftershot3x64 depends on libgstreamer-plugins-base0.10-0; however:&#xA;  Package libgstreamer-plugins-base0.10-0 is not installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13584" LastEditorUserId="578" LastEditDate="2018-02-07T09:11:51.873" LastActivityDate="2018-02-07T09:12:23.497" Title="Install Corel AfterShot Pro 3" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14689" PostTypeId="2" ParentId="14688" CreationDate="2018-02-07T09:12:23.497" Score="0" Body="&lt;p&gt;You have to install missing dependencies.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="578" LastActivityDate="2018-02-07T09:12:23.497" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14690" PostTypeId="1" CreationDate="2018-02-07T16:31:36.493" Score="0" ViewCount="331" Body="&lt;p&gt;I'm running Elementary OS Loki as my main OS on my full hard drive. Previously I had Windows 10 on the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need Windows 10 for one or two apps that will not be stable in a Linux environment. (CAD software)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How do I go about putting Windows on a section of the disk without ruining my Elementary OS setup?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;---My Setup---&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have two disks, an ssd and hard drive. Loki is currently on the ssd. I am comfortable doing any of the following. I just don't know how.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Loki and Windows on the ssd together&lt;/li&gt;&#xA;&lt;li&gt;Windows on the hard drive, with part of it partitioned for shared space&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13639" LastActivityDate="2018-12-09T18:24:47.320" Title="Windows as Second Dual Boot" Tags="|microsoft-windows|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14691" PostTypeId="1" CreationDate="2018-02-07T16:52:00.517" Score="0" ViewCount="897" Body="&lt;p&gt;So one night I forgot to plug in my laptop with elementaryOS, I closed the lid, and the battery died. After I charged it again, I turned on my laptop and the only thing that I got was a blinking cursor. After finding some help on forums, I figured out how to go to the terminal. Now, when I try to use startx, it just won't start the desktop. It will output about how messages are outputed, the screen would go black, and then It will end the task. I tried various methods, such as upgrading the kernel and reinstaling Xorg, but none of them worked. So, someone knows how to fix it? Here are the specs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HP Pavilion 14-v005la &lt;/p&gt;&#xA;&#xA;&lt;p&gt;AMD A8-6410 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 GB of RAM &lt;/p&gt;&#xA;&#xA;&lt;p&gt;500 GB HDD&lt;/p&gt;&#xA;" OwnerUserId="13641" LastActivityDate="2023-12-17T05:02:15.247" Title="elementaryOS won't start Xorg" Tags="|release-loki|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14693" PostTypeId="1" CreationDate="2018-02-07T20:08:17.720" Score="1" ViewCount="98" Body="&lt;p&gt;I installed the os (Loki 0.4.1) on my Dell XPS M1530. At the beginning of the install it found my wireless network. I checked the boxes to install 3rd party drivers, and to download updates. The installation seemed to work perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reboot the network icon at the top of the screen has an x on it. Opening up network settings displays:&#xA;Ethernet Cable unplugged&#xA;VPN Disconnected&#xA;Proxy Disabled&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get my wireless to work, it worked during setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Donald Lareau&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ifconfig &amp;amp; ip link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ifconfig&#xA;enp9s0    Link encap:Ethernet  HWaddr 00:21:9b:eb:20:56&lt;br&gt;&#xA;          UP BROADCAST MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:0 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)&#xA;          Interrupt:16 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;lo        Link encap:Local Loopback&lt;br&gt;&#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:324 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:324 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:23920 (23.9 KB)  TX bytes:23920 (23.9 KB)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ip link&#xA;1: lo:  mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000&#xA;    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00&#xA;2: enp9s0:  mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000&#xA;    link/ether 00:21:9b:eb:20:56 brd ff:ff:ff:ff:ff:ff&lt;/p&gt;&#xA;" OwnerUserId="13645" LastEditorUserId="13645" LastEditDate="2018-02-18T17:00:05.150" LastActivityDate="2018-02-18T17:00:05.150" Title="It found my wifi during installation but it is missing after rebooting" Tags="|wifi|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14695" PostTypeId="2" ParentId="14691" CreationDate="2018-02-08T04:19:38.860" Score="0" Body="&lt;p&gt;Remove these directories&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rm .Xauthority .ICEauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And clear cache&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rm -Rf .cache&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;These commands helped me, it might solve your problem&lt;/p&gt;&#xA;" OwnerUserId="13648" LastEditorUserId="30938" LastEditDate="2023-03-22T02:39:01.853" LastActivityDate="2023-03-22T02:39:01.853" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14700" PostTypeId="1" AcceptedAnswerId="14705" CreationDate="2018-02-08T13:25:55.793" Score="4" ViewCount="8418" Body="&lt;p&gt;I mean, as soon as I enter on the website, it asks me to pay before the downloading. So, is the system  really free? Especially for use in a commercial environment? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13656" LastEditorUserId="13656" LastEditDate="2018-02-08T13:31:17.003" LastActivityDate="2023-08-14T22:43:29.207" Title="Is elementary OS really free?" Tags="|download|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14701" PostTypeId="2" ParentId="14700" CreationDate="2018-02-08T13:41:15.237" Score="5" Body="&lt;p&gt;You can fill in 0,-, that way you could download it for free (gratis). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Related to this, free software isn't always without costs (gratis). Free usually revers to freedom. More on this: &lt;a href=&quot;https://opensource.com/resources/what-open-source&quot; rel=&quot;noreferrer&quot;&gt;https://opensource.com/resources/what-open-source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also see: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3809/how-can-i-re-download-without-paying-again&quot;&gt;How can I (re-)download without paying (again)?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/3517/3892&quot;&gt;https://elementaryos.stackexchange.com/a/3517/3892&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-08T13:41:15.237" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14702" PostTypeId="2" ParentId="14492" CreationDate="2018-02-08T14:10:11.690" Score="0" Body="&lt;p&gt;Same occurred with me, fresh install using elementaryos-0.4.1-stable.20180130.iso on a HP Pavilion with NVIDIA GForce 1050 and integrated Intell Graphics. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way I resolved this is when the login screen appears instead of typing the password I have pressed Ctrl+Alt+F1 (F2,F3..F6 will also work), login from console (username, enter, password, enter) and  then I have typed&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade &#xA;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The last line helps sp intel microcode and NVIDIA drivers was also installed. Force shutdown  by holding a few seconds the Power Off button (&lt;code&gt;sudo reboot now&lt;/code&gt; freezes with a lot of nouveau error messages) and once the system has started again I was able to login into the desktop. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2018-02-08T15:03:55.977" LastActivityDate="2018-02-08T15:03:55.977" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14703" PostTypeId="2" ParentId="12430" CreationDate="2018-02-08T14:27:29.870" Score="0" Body="&lt;p&gt;It's apparently a issue with dbus, more information: &lt;a href=&quot;https://github.com/elementary/gala/issues/143&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/143&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See Mike Rodov answer for the work around. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-08T14:27:29.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14704" PostTypeId="2" ParentId="14681" CreationDate="2018-02-08T16:30:18.943" Score="2" Body="&lt;p&gt;Stop lightdm (the login screen) with&#xA;&lt;code&gt;sudo systemctl stop lightdm&lt;/code&gt; from tty1;&#xA;then run&#xA;&lt;code&gt;sudo su&lt;/code&gt;&#xA; to login as root; then delete the .Xauthority file with&#xA;&lt;code&gt;rm -f ./.Xauthority&lt;/code&gt;,&#xA; and then reboot.&lt;/p&gt;&#xA;" OwnerUserId="12029" LastEditorUserId="84" LastEditDate="2018-05-06T17:10:04.890" LastActivityDate="2018-05-06T17:10:04.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14705" PostTypeId="2" ParentId="14700" CreationDate="2018-02-08T19:39:02.837" Score="4" Body="&lt;p&gt;Although not clearly stated anywhere, elementary OS is free to use in a commercial environment. Tell your legal department it's free to use because it's not explicitly forbidden (on the legal principle that if something is not forbidden, it's permitted).&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-02-08T19:39:02.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14706" PostTypeId="1" CreationDate="2018-02-09T02:56:30.420" Score="1" ViewCount="129" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SH2CK.png&quot; alt=&quot;image&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was using the standard screenshot tool that comes default. I must have encountered a bug somehow because it cause all system fonts to turn into this squiggling lines as seen in my image.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried changing languages, updating the OS in the app center, and googling how to fix fonts. I've found some users with similar problems but no fix yet.&lt;/p&gt;&#xA;" OwnerUserId="13659" LastActivityDate="2019-01-31T23:01:15.243" Title="Screenshot tool messed up system wide fonts" Tags="|system|fonts|screenshot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14707" PostTypeId="2" ParentId="14700" CreationDate="2018-02-09T03:36:35.710" Score="0" Body="&lt;p&gt;As far as I can see, most people confuse that free as in not paying for a beer and drinking it.  But the truth is that someone has to pay for it, if not a friend, yourself or the owner someone most.  The software is free as in freedom to see what is inside and to own it ( not counting the trademarks and logos).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like the user above said, put a $0 and download the software, if you cannot afford to pay for it.  But the truth is, that everyone can afford at least a dollar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am getting use to paying for Apps that I like in the store.  At least a dollar or two.  Again, if you are a student from elementary or high school and cannot afford an ATM card, yeah this is made for you.  Enjoy, if not, give them a buck or two.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS, I don't work for the team nor do I benefit from your purchase on any shape or form.  I just believe that fair is fair   &lt;/p&gt;&#xA;" OwnerUserId="13529" LastActivityDate="2018-02-09T03:36:35.710" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14709" PostTypeId="1" CreationDate="2018-02-09T14:52:03.877" Score="0" ViewCount="79" Body="&lt;p&gt;Does current eOS build work with Ryzen specifically Thraeadripper 1950? Or do I need to do some specific steps to build to latest kernel?&lt;/p&gt;&#xA;" OwnerUserId="12595" LastActivityDate="2018-02-09T21:28:34.033" Title="AMD Threadripper support" Tags="|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14711" PostTypeId="1" CreationDate="2018-02-09T15:37:28.700" Score="2" ViewCount="93" Body="&lt;p&gt;I'm new to this forum, so sorry for any mistakes..&#xA;Today I booted my Elementary OS into this (see the screenshot). Blurred or missing texts, no text in menus... But pages and menus a rendering correctly in Google Chrome and in Steam.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem might be corrupted apt upgrade process. Yesterday I experienced a power blackout when apt was finishing the upgrade process. One of the packages were some mesa packages, but it seemed almost finished, just setting things up.&#xA;I tried to re-install them and reboot, but nothing happened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, before the blackout, I also installed libtxc-dxtn-s2tc0 trying to solve a minor glitch in Trine game. Later, after the reboot, I tried to remove libtxc-dxtn-s2tc0 and install it back again, but neither helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I identify the real cause of the problem and solve it? I can provide you any information you ask for, but I have no idea where to start. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the mentioned apt upgrade:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Start-Date: 2018-02-08  22:56:41 Commandline: apt upgrade Requested-By: drnec (1000) Install: libboost-locale1.58.0:amd64 (1.58.0+dfsg-5ubuntu3.1, automatic), libboost-thread1.58.0:amd64 (1.58.0+dfsg-5ubuntu3.1, automatic), fonts-liberation2:amd64 (2.00.1-5~16.04.1~lo4, automatic) Upgrade: libreoffice-style-breeze:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-math:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libgles2-mesa:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libdrm-nouveau2:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libdrm-nouveau2:i386 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libreoffice-gtk2:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libparted2:amd64 (3.2-15, 3.2-15ubuntu0.1), libreoffice-core:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libglapi-mesa:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libglapi-mesa:i386 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libreoffice-style-oxygen:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-style-human:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), papirus-icon-theme:amd64 (20180204-2173+pkg18~ubuntu16.04.1, 20180207-2186+pkg18~ubuntu16.04.1), libxatracker2:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libreoffice-style-hicontrast:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), flashplugin-installer:amd64 (28.0.0.137ubuntu0.16.04.1, 28.0.0.161ubuntu0.16.04.1), libegl1-mesa:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libreoffice-style-sifr:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), python3-uno:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libparted-fs-resize0:amd64 (3.2-15, 3.2-15ubuntu0.1), libapparmor1:amd64 (2.10.95-0ubuntu2.7, 2.10.95-0ubuntu2.8), libgbm1:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), adapta-gtk-theme:amd64 (3.93.0.110-0ubuntu1~xenial1, 3.93.0.113-0ubuntu1~xenial1), libreoffice-style-galaxy:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-base-core:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libdrm-amdgpu1:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libdrm-amdgpu1:i386 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libreoffice-style-elementary:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libapparmor-perl:amd64 (2.10.95-0ubuntu2.7, 2.10.95-0ubuntu2.8), oem-audio-hda-daily-dkms:amd64 (0.201802042116~ubuntu16.04.1,&#xA;0.201802072245~ubuntu16.04.1), chromium-codecs-ffmpeg-extra:amd64 (64.0.3282.119-0ubuntu0.16.04.1, 64.0.3282.140-0ubuntu0.16.04.1), libwayland-egl1-mesa:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), ure:amd64 (5.4.4~rc2-0ubuntu0.16.04.1~lo1, 6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-writer:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-common:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), parted:amd64 (3.2-15, 3.2-15ubuntu0.1), libdrm2:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libdrm2:i386 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libgl1-mesa-dri:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libgl1-mesa-dri:i386 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libgl1-mesa-glx:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libgl1-mesa-glx:i386 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), fonts-opensymbol:amd64 (2:102.10+LibO5.4.4~rc2-0ubuntu0.16.04.1~lo1, 2:102.10+LibO6.0.0~rc3-0ubuntu0.16.04.1~lo7), libdrm-intel1:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libdrm-intel1:i386 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), apparmor:amd64 (2.10.95-0ubuntu2.7, 2.10.95-0ubuntu2.8), uno-libs3:amd64 (5.4.4~rc2-0ubuntu0.16.04.1~lo1, 6.0.0~rc3-0ubuntu0.16.04.1~lo7), libreoffice-style-tango:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libdrm-radeon1:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), libdrm-radeon1:i386 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0), mesa-vdpau-drivers:amd64 (1:18.1~git180129151100.0347a83~x~padoka0, 1:18.1~git180208124100.e843667~x~padoka0), libreoffice-calc:amd64 (1:5.4.4~rc2-0ubuntu0.16.04.1~lo1, 1:6.0.0~rc3-0ubuntu0.16.04.1~lo7), libdrm-common:amd64 (2.4.89+git1801241146.1cc1774~x~padoka0,&#xA;2.4.89+git1802081214.fa35b51~x~padoka0) End-Date: 2018-02-08  23:00:56&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/atqng.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/atqng.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13668" LastActivityDate="2023-12-13T07:00:35.143" Title="Graphic glitch after interrupted apt upgrade?" Tags="|updates|apt|graphics|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14712" PostTypeId="1" CreationDate="2018-02-09T16:07:23.347" Score="1" ViewCount="30" Body="&lt;p&gt;Can we set the interface metric in Microsoft windows with elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2JycM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2JycM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;" OwnerUserId="13669" LastActivityDate="2018-02-09T16:07:23.347" Title="how to Elementray os network metric settings" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14713" PostTypeId="2" ParentId="14709" CreationDate="2018-02-09T21:28:34.033" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LRUuH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LRUuH.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can confirm that it does infact work with a 1950 threadripper&lt;/p&gt;&#xA;" OwnerUserId="13395" LastActivityDate="2018-02-09T21:28:34.033" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14714" PostTypeId="2" ParentId="14711" CreationDate="2018-02-10T05:19:04.417" Score="0" Body="&lt;p&gt;This could be a result of broken packages because of the power loss during the update process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try this (in Terminal):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get -f install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you've done that, update and then upgrade using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you've done the above comment back with the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-10T05:19:04.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14715" PostTypeId="1" AcceptedAnswerId="14729" CreationDate="2018-02-10T05:26:09.777" Score="1" ViewCount="168" Body="&lt;p&gt;I have a Dell XPS 13 from 2016. The F7 key is unused. The other F-keys are bound to xf86 keys. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to turn my F7 key into a screen off key, running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xset dpms force off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but custom shortcuts can't use just 1 key. In dconf-editor, I manually changed the keybinding for this custom shortcut to F7, but it's still unrecognized. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;xbindkeys&lt;/code&gt; to check the tag for F7, I see that F7 is indeed correct. However, after manually changing the setting in dconf-editor,  &lt;code&gt;xbindkeys&lt;/code&gt; doesn't detect a keypress for F7 key. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? Thanks in advance for your help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I'm running Loki, everything up to date.&lt;/p&gt;&#xA;" OwnerUserId="13672" LastActivityDate="2019-05-08T04:04:41.420" Title="Bind command to unused F7 key" Tags="|release-loki|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14716" PostTypeId="1" AcceptedAnswerId="14720" CreationDate="2018-02-10T13:39:37.950" Score="1" ViewCount="350" Body="&lt;p&gt;Actually, i did a mistake.&#xA;I install tweaks for elementary and then  I remove dock and one more from the startup(in tweaks settings).&#xA;Everything works fine but when I restart only wallpaper is visible there is no dock and top bar in elementary Loki.&#xA;I can now access the only terminal using Ctrl - Alt + T &lt;/p&gt;&#xA;" OwnerUserId="13677" LastActivityDate="2018-02-10T16:53:50.000" Title="dock and top bar is not visible only wallpaper (loki)" Tags="|release-loki|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14717" PostTypeId="1" AcceptedAnswerId="14737" CreationDate="2018-02-10T14:37:41.560" Score="0" ViewCount="1689" Body="&lt;p&gt;The AppCenter is not updating. When I try to update on the AppCenter, I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-pt) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu lucid InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;E: http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu lucid InRelease is not (yet) available (Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?))&#xA;W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu lucid InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;E: http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu lucid InRelease is not (yet) available (Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?))&#xA;W: The repository 'http://ppa.launchpad.net/nathandyer/vocal-daily/ubuntu xenial Release' does not have a Release file.&#xA;W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main amd64 Packages is not (yet) available (Hash Sum mismatch)&#xA;E: http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main i386 Packages is not (yet) available ()&#xA;E: http://ppa.launchpad.net/nathandyer/vocal-daily/ubuntu xenial/main amd64 Packages is not (yet) available (403  Forbidden)&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And with sudo apt update, I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;Hit:1 http://pt.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://pt.archive.ubuntu.com/ubuntu xenial-updates InRelease&lt;br&gt;&#xA;Get:3 http://pt.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]&#xA;Ign:4 http://dl.google.com/linux/chrome/deb stable InRelease&lt;br&gt;&#xA;Hit:5 http://ppa.launchpad.net/deluge-team/ppa/ubuntu xenial InRelease&lt;br&gt;&#xA;Hit:6 http://packages.elementary.io/appcenter xenial InRelease&lt;br&gt;&#xA;Hit:7 http://dl.google.com/linux/chrome/deb stable Release&lt;br&gt;&#xA;Get:8 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]&lt;br&gt;&#xA;Hit:9 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease &#xA;Hit:11 https://repo.skype.com/deb stable InRelease&lt;br&gt;&#xA;Ign:12 https://mega.nz/linux/MEGAsync/xUbuntu_16.04 ./ InRelease&lt;br&gt;&#xA;Hit:13 http://repository.spotify.com stable InRelease&lt;br&gt;&#xA;Hit:14 http://ppa.launchpad.net/freetuxtv/freetuxtv-dev/ubuntu xenial InRelease&#xA;Hit:15 http://repo.steampowered.com/steam precise InRelease&lt;br&gt;&#xA;Hit:16 http://ppa.launchpad.net/kxstudio-debian/ubuntus/ubuntu xenial InRelease&#xA;Hit:17 http://ppa.launchpad.net/kxstudio-debian/gcc5/ubuntu wily InRelease&lt;br&gt;&#xA;Get:18 https://mega.nz/linux/MEGAsync/xUbuntu_16.04 ./ Release [988 B]&lt;br&gt;&#xA;Hit:19 http://ppa.launchpad.net/kxstudio-debian/gcc5/ubuntu xenial InRelease&#xA;Hit:20 http://ppa.launchpad.net/kxstudio-debian/gcc5-deps/ubuntu xenial InRelease&#xA;Hit:22 http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu lucid InRelease&#xA;0% [22 InRelease gpgv 101 kB] [Waiting for headers]Splitting up /var/lib/apt/lists/ppa.launchpad.net_kxstudio-debian_libs_ubuntu_dists_lucid_InRelease intErr:22 http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu lucid InRelease&#xA;  Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;Hit:23 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid InRelease&#xA;Hit:24 http://ppa.launchpad.net/kxstudio-debian/plugins/ubuntu lucid InRelease&#xA;Hit:25 http://ppa.launchpad.net/kxstudio-debian/apps/ubuntu lucid InRelease &#xA;Hit:26 http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu lucid InRelease&#xA;0% [26 InRelease gpgv 101 kB] [Connecting to ppa.launchpad.net (91.189.95.83Splitting up /var/lib/apt/lists/ppa.launchpad.net_kxstudio-debian_kxstudio_ubuErr:26 http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu lucid InRelease&#xA;  Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;Hit:27 http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu trusty InRelease&#xA;Hit:28 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu trusty InRelease&#xA;Hit:29 http://ppa.launchpad.net/kxstudio-debian/plugins/ubuntu trusty InRelease&#xA;Hit:30 http://ppa.launchpad.net/kxstudio-debian/apps/ubuntu trusty InRelease&#xA;Hit:31 http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu trusty InRelease&#xA;Hit:32 http://ppa.launchpad.net/mathieu.leplatre/subtivals/ubuntu xenial InRelease&#xA;Hit:33 http://ppa.launchpad.net/menulibre-dev/daily/ubuntu xenial InRelease &#xA;Hit:34 http://ppa.launchpad.net/mixxx/mixxx/ubuntu xenial InRelease&lt;br&gt;&#xA;Ign:35 http://ppa.launchpad.net/nathandyer/vocal-daily/ubuntu xenial InRelease&#xA;Hit:36 http://ppa.launchpad.net/openshot.developers/ppa/ubuntu xenial InRelease&#xA;Hit:37 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease&#xA;Hit:38 http://ppa.launchpad.net/phablet-team/tools/ubuntu xenial InRelease&lt;br&gt;&#xA;Ign:39 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main amd64 Packages&#xA;Ign:40 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main i386 Packages&#xA;Ign:41 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main Translation-en&#xA;Err:42 http://ppa.launchpad.net/nathandyer/vocal-daily/ubuntu xenial Release&#xA;  403  Forbidden&#xA;Ign:39 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main amd64 Packages&#xA;Ign:40 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main i386 Packages&#xA;Ign:41 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main Translation-en&#xA;Get:39 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main amd64 Packages [64,6 kB]&#xA;Err:39 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main amd64 Packages&#xA;  Hash Sum mismatch&#xA;Ign:41 http://ppa.launchpad.net/kxstudio-debian/music/ubuntu lucid/main Translation-en&#xA;Reading package lists... Done&lt;br&gt;&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-pt) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ppa.launchpad.net/kxstudio-debian/libs/ubuntu lucid InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://ppa.launchpad.net/kxstudio-debian/kxstudio/ubuntu lucid InRelease: Clearsigned file isn't valid, got 'NODATA' (does the network require authentication?)&#xA;E: The repository 'http://ppa.launchpad.net/nathandyer/vocal-daily/ubuntu xenial Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-pt) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:54 and /etc/apt/sources.list.d/appcenter.list:1&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me here? Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="6617" LastEditDate="2018-02-12T09:55:38.350" LastActivityDate="2018-02-14T10:15:14.167" Title="AppCenter and sudo apt update with &quot;failed to fetch update&quot;" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14718" PostTypeId="1" CreationDate="2018-02-10T15:05:50.033" Score="0" ViewCount="528" Body="&lt;p&gt;I'm trying to copy some files to my USB (5 GB). At the start its go fast (200 MB/s approx), but when it is en 3GB approx the speed begins to decrease (17 MB/s). It is always in the same place at 3gb, i use other usb port but it has the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone with this problem? a possible fix ?&lt;/p&gt;&#xA;" OwnerUserId="9269" LastActivityDate="2023-12-10T09:06:00.693" Title="Problem copying files from hard disk to flash drive (USB)" Tags="|files|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14719" PostTypeId="2" ParentId="7194" CreationDate="2018-02-10T15:18:37.703" Score="0" Body="&lt;p&gt;Assuming you are running ElementaryOS 0.4 Loki you should do two things:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Update Kernel to latest LTS HWE stack:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install --install-recommends linux-generic-hwe-16.04 xserver-xorg-hwe-16.04&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install newest Mesa 3D drivers from Padoka Stable PPA:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo add-apt-repository ppa:paulo-miguel-dias/pkppa &amp;amp;&amp;amp; sudo apt update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-02-10T15:18:37.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14720" PostTypeId="2" ParentId="14716" CreationDate="2018-02-10T16:47:02.747" Score="1" Body="&lt;p&gt;Let me see if I can get this answered while not in front of my elementary OS install. I should be able to! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since you are able to open terminal, great! So, open a terminal and run the command to open System Settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;switchboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you open Switchboard, you should be able to access elementary Tweaks. You can then open Tweaks and add both Plank and Wingpanel to the Cerbere section. On the bottom right corner of Tweaks there is a button labeled &quot;Reset to Defaults&quot; and clicking it should add Wingpanel and Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, you can manually add them using the &quot;+&quot; symbol. I believe Wingpanel can be added simply using wingpanel as the command and Plank can be added using plank as the command if they are not in a pull-down list. After you've done the above reboot using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you've rebooted and logged in, all should be good. Again, I'm posting this from memory but I think this is it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastEditorUserId="13440" LastEditDate="2018-02-10T16:53:50.000" LastActivityDate="2018-02-10T16:53:50.000" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14723" PostTypeId="1" AcceptedAnswerId="14724" CreationDate="2018-02-10T22:06:48.250" Score="0" ViewCount="519" Body="&lt;p&gt;xscreensaver is safe to run with some settings that won't change Elementary OS look and feel: choose your screensaver and check he doesn't do so and save those settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once done, you'll notice that you can't just add it on startup, it requires a script to run properly (otherwise it's window will popup on startup).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I installed it because on my system, suddenly my machine wouldn't suspend anymore, requiring the need to install xscreensaver.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2018-11-09T01:01:45.377" Title="How to start xscreensaver on startup" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14724" PostTypeId="2" ParentId="14723" CreationDate="2018-02-10T22:07:23.210" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Applications &gt; System Settings &gt;  Applications &gt; Startup Tab &gt; add &gt; Type in custom command&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and there type: xscreensaver -nosplash&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2018-02-10T22:07:23.210" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14728" PostTypeId="1" CreationDate="2018-02-11T12:14:48.500" Score="0" ViewCount="79" Body="&lt;p&gt;I have been using elementry OS for some time. I use terminal a lot. I like the simplicity of pantheon-terminal but some behavior of terminal irritates me. Whenever, some commands are issues (which has a long list of lines), the terminal only displays the last few lines and does not allow me to see the top lines. When I use scroll bar to view top lines, it goes back to last line automatically. How do I disable this behaviors?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how do I use backspace to delete line in terminal? Currently, backspace deletes only one letter.&lt;/p&gt;&#xA;" OwnerUserId="7094" LastActivityDate="2024-03-16T08:02:35.287" Title="How to disable jumping to last line and in pantheon-terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14729" PostTypeId="2" ParentId="14715" CreationDate="2018-02-11T12:31:54.320" Score="1" Body="&lt;p&gt;Try Applications --&gt; System Settings --&gt; Keyboard --&gt; Shortcuts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select the Custom set on the left, then click the '+' button. Enter the command and options you want to run and then click where it says Disabled. Hit the F7 key and you should see it says F7 instead of Disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to log out and back in for this to take effect (as it says at the top).&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2018-02-11T12:31:54.320" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14730" PostTypeId="2" ParentId="8952" CreationDate="2018-02-11T15:48:57.157" Score="2" Body="&lt;p&gt;What always works is disabling your NVIDIA card, see Bo rislav's answer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to use your NVIDIA graphics card and this happens, I would recommend executing &lt;code&gt;gala -r&lt;/code&gt; from the Applications menu as a temporary workaround:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tDLn0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tDLn0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm pretty sure this is a NVIDIA driver issue, but there is an existing Gala issue: &lt;a href=&quot;https://github.com/elementary/gala/issues/21&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/21&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-11T15:48:57.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14731" PostTypeId="1" CreationDate="2018-02-11T16:09:29.920" Score="-1" ViewCount="334" Body="&lt;p&gt;I'm New To E-OS And I Want To Know That.&#xA;Is There Any App Which I Can Use To &lt;strong&gt;Highly Compress&lt;/strong&gt; Files in Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="13692" LastActivityDate="2018-02-11T16:59:01.233" Title="How To Highly Compress Files" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14732" PostTypeId="2" ParentId="14731" CreationDate="2018-02-11T16:59:01.233" Score="0" Body="&lt;p&gt;There are quite a few compression tools available, most commonly used are gzip, bzip2 &amp;amp; xz from command line or just use the Files GUI tool (right-click on a file and select compress).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You don't define what &quot;highly&quot; means, but most command-line tools have options to specify the compression level. Higher compression generally requires more memory (RAM) to work and can take a lot longer to complete both compress and decompress options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that not all files compress well. Some may even become larger, it really depends on the content of the file, compression algorithm and level. Some algorithms will work better than others on different files, so there is no single &quot;best&quot; tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This all assumes you want lossless compression. Image, video and audio files are often compressed with &quot;lossy&quot; algorithms like JPEG, MP3, etc. These result in smaller files, but they do so by discarding some of the data. The higher the compression ratio the lower the quality of the decompressed image/frame/audio afterwards.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2018-02-11T16:59:01.233" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14734" PostTypeId="1" CreationDate="2018-02-11T17:46:23.437" Score="1" ViewCount="964" Body="&lt;p&gt;I've just installed Loki and I'm getting very strange mouse movement behavior. Touchpad works fine, but if I want to use my Logitech M310 mouse.. well it's not usable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can move the mouse pointer to the top or bottom of the screen, but moving left or right makes it go really slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: If I plug the mouse into another computer it works OK.&lt;/p&gt;&#xA;" OwnerUserId="4392" LastEditorUserId="4392" LastEditDate="2018-02-11T18:04:50.313" LastActivityDate="2018-12-16T18:02:10.430" Title="Strange Mouse movement issue" Tags="|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14735" PostTypeId="2" ParentId="14690" CreationDate="2018-02-11T18:28:21.983" Score="1" Body="&lt;p&gt;There isn't a really &quot;safe&quot; way to create a dual boot without impact on you current OS setup. So please, make a backup copy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to wipe your drivers and install Windows first, as elementaryOS installer knows how to play with a existing OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you may use a partition editor (like gparted) to shrink your elementaryOS partition to open space in your drive. Then, after Windows is installed with its own bootloader, you'll need to boot with a Linux &quot;liveCD/USB&quot; and reinstall GRUB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My current setup on my single hdd laptop is three partitions: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;elementaryOS (100GB)&lt;/li&gt;&#xA;&lt;li&gt;Windows 10 (100GB)&lt;/li&gt;&#xA;&lt;li&gt;A NTFS partition with my personal folders from Windows (~750 GB)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I find the third partition useful as (prior to Win10, actually) I often needed to reinstall Windows and used to try a lot of Linux distros.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2018-02-11T18:28:21.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14736" PostTypeId="2" ParentId="12071" CreationDate="2018-02-11T18:30:43.797" Score="1" Body="&lt;p&gt;&lt;code&gt;gksudo nautilus&lt;/code&gt; won't work, since elementary OS does not come with Nautilus file manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there's an equivalent to that. Go to &lt;strong&gt;Applications&lt;/strong&gt;, right click on &lt;strong&gt;Files&lt;/strong&gt;, select &lt;strong&gt;New Window as Administrator&lt;/strong&gt;, and enter your password. Then try pasting the file.&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2018-02-11T18:30:43.797" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14737" PostTypeId="2" ParentId="14717" CreationDate="2018-02-11T18:52:39.010" Score="3" Body="&lt;p&gt;It appears to me that the PPAs &lt;code&gt;kxstudio-debian&lt;/code&gt; and &lt;code&gt;nathandyer/vocal-daily&lt;/code&gt; are causing issues here. You might want to remove them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do so,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;strong&gt;Applications&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Right click on &lt;strong&gt;Files&lt;/strong&gt; and select &lt;strong&gt;New Window as Administrator&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Then navigate to &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In this directory, delete anything that says &lt;code&gt;kxstudio&lt;/code&gt; or &lt;code&gt;nathandyer&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Then try running an update; it should work.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Obviously, this means that you will no longer receive updates for KXStudio and Vocal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For KXStudio, you can try to add the PPA from scratch later. For Vocal, unless you are a tester, you can just &lt;a href=&quot;https://appcenter.elementary.io/com.github.needle-and-thread.vocal.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;purchase it from AppCenter&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2018-02-11T18:52:39.010" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14738" PostTypeId="2" ParentId="14384" CreationDate="2018-02-11T19:05:11.080" Score="0" Body="&lt;p&gt;Good to know you could at least log in. Just so you get back your old system, here is a list of packages that depend, directly or indirectly, on &lt;code&gt;adwaita-icon-theme&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;appcenter apport-gtk audience bamfdaemon capnet-assist dconf-editor elementary-artwork elementary-default-settings elementary-desktop elementary-icon-theme elementary-sdk&#xA;  epiphany-browser evince evolution-data-server evolution-data-server-pantheon-online-accounts file-roller gala gcr gir1.2-appindicator3-0.1 gir1.2-clutter-1.0&#xA;  gir1.2-granite-1.0 gir1.2-gtk-3.0 gir1.2-mutter-3.0 gir1.2-peas-1.0 gir1.2-rb-3.0 gir1.2-vte-2.91 gir1.2-webkit2-4.0 gir1.2-wnck-3.0 gjs gkbd-capplet gnome-bluetooth&#xA;  gnome-font-viewer gnome-icon-theme gnome-icon-theme-symbolic gnome-keyring gnome-orca gnome-power-manager gnome-session-bin gnome-settings-daemon gnome-user-guide&#xA;  gnome-user-share granite-demo gstreamer1.0-clutter-3.0 gstreamer1.0-plugins-bad gtk-3-examples gvfs-backends humanity-icon-theme ibus ibus-gtk3 ibus-table&#xA;  indicator-application indicator-kdeconnect libappindicator3-1 libcanberra-gtk3-0 libcanberra-gtk3-module libchamplain-0.12-0 libchamplain-gtk-0.12-0 libcheese-gtk25&#xA;  libcheese8 libclutter-1.0-0 libclutter-1.0-dev libclutter-gst-3.0-0 libclutter-gtk-1.0-0 libedataserverui-1.2-1 libevdocument3-4 libevview3-3 libfolks-eds25&#xA;  libgail-3-0 libgala-dev libgala0 libgcr-ui-3-1 libgjs0e libgnome-bluetooth13 libgnome-desktop-3-12 libgnomekbd8 libgranite-dev libgranite3 libgranite4 libgtk-3-0&#xA;  libgtk-3-bin libgtk-3-common libgtk-3-dev libgtksourceview-3.0-1 libgtkspell3-3-0 libgweather-3-6 libindicator3-7 libmaya-calendar0 libmutter-dev libmutter0g&#xA;  libnautilus-extension1a libnm-gtk0 libnma0 libnoise-core0 libpantheon-files-core0 libpantheon-files-widgets0 libpeas-1.0-0 libpeas-1.0-0-python3loader libplank1&#xA;  librhythmbox-core9 libscratchcore0 libtimezonemap1 libunity-control-center1 libunity-settings-daemon1 libvte-2.91-0 libwebkit2gtk-4.0-37 libwebkit2gtk-4.0-37-gtk2&#xA;  libwebkit2gtk-4.0-dev libwebkitgtk-3.0-0 libwingpanel-2.0-0 libwingpanel-2.0-dev libwnck-3-0 libyelp0 light-locker maya-calendar maya-calendar-daemon&#xA;  maya-calendar-plugin-caldav maya-calendar-plugin-google mousetweaks network-manager-gnome network-manager-openvpn-gnome network-manager-pptp-gnome noise&#xA;  notification-daemon onboard onboard-data pantheon-agent-polkit pantheon-calculator pantheon-files pantheon-greeter pantheon-mail&#xA;  pantheon-online-accounts-plugin-fastmail pantheon-online-accounts-plugin-password pantheon-photos pantheon-print pantheon-shell pantheon-terminal&#xA;  pantheon-xsession-settings pinentry-gnome3 plank policykit-1-gnome python3-aptdaemon.gtk3widgets&#xA;  scratch-text-editor screenshot-tool sessioninstaller slingshot-launcher snap-photobooth switchboard switchboard-gnome-control-center-override switchboard-plug-a11y&#xA;  switchboard-plug-about switchboard-plug-applications switchboard-plug-bluetooth switchboard-plug-datetime switchboard-plug-display switchboard-plug-gcc-color&#xA;  switchboard-plug-gcc-sound switchboard-plug-gcc-wacom switchboard-plug-keyboard switchboard-plug-locale switchboard-plug-mouse-touchpad switchboard-plug-networking&#xA;  switchboard-plug-notifications switchboard-plug-online-accounts switchboard-plug-pantheon-shell switchboard-plug-parental-controls switchboard-plug-power&#xA;  switchboard-plug-printers switchboard-plug-security-privacy switchboard-plug-sharing switchboard-plug-useraccounts switchboard-plug-users system-config-printer-gnome&#xA;  transmission-gtk ubuntu-mono unity-control-center unity-settings-daemon user-specific-alternatives wingpanel wingpanel-indicator-ayatana wingpanel-indicator-bluetooth&#xA;  wingpanel-indicator-datetime wingpanel-indicator-keyboard wingpanel-indicator-network wingpanel-indicator-notifications wingpanel-indicator-power&#xA;  wingpanel-indicator-session wingpanel-indicator-sound xdg-user-dirs-gtk yelp zenity&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try installing these, and most of the stuff elementary OS comes with should be back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; I pulled this list from my installation, and then removed any packages I had installed myself. I'm sorry if I forgot anything.&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2018-02-11T19:05:11.080" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14739" PostTypeId="1" AcceptedAnswerId="14786" CreationDate="2018-02-11T20:07:20.247" Score="0" ViewCount="1221" Body="&lt;p&gt;Can anyone tell me if it's possible to use the middle mouse button to scroll in eos loki?&#xA;Normally by clicking the middle button (the scroll wheel) it will allow me to scroll up and down the page using the mouse however I can't see a way to activate this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To expand the question as requested..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type of mouse: I have tried an old genius mouse, a lenovo USB wired laser mouse and finally a logitec wireless. The result is the same. When I push the scroll button down so it clicks as the middle button it has no affect. Normally I would expect I can scroll up and down a page without using the scroll wheel until I click the middle button. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure what more details to add. &lt;/p&gt;&#xA;" OwnerUserId="12218" LastEditorUserId="12218" LastEditDate="2018-02-12T05:46:01.317" LastActivityDate="2018-02-15T07:49:10.800" Title="Middle mouse button" Tags="|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14740" PostTypeId="1" CreationDate="2018-02-11T20:14:46.337" Score="0" ViewCount="650" Body="&lt;p&gt;I am wanting to run this OS on a Lenovo flex 3. Ubuntu 17.10.1 contains a fix to an issue in the Linux 4.13 kernel that corrupts the bios on these machines. Is this issue an issue in this distro?&lt;/p&gt;&#xA;" OwnerUserId="13694" LastActivityDate="2022-10-14T23:41:39.043" Title="Compatibility with Lenovo" Tags="|kernel|lenovo|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14741" PostTypeId="2" ParentId="14740" CreationDate="2018-02-11T20:24:29.740" Score="1" Body="&lt;p&gt;The current elementary OS version Loki is build on Ubuntu 16.04 and the next version of elementary, Juno, will be build on Ubuntu 18.04. So I don't think that will be an issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also see: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7l7mis/is_elementaryos_affected_the_same_way_as_ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/7l7mis/is_elementaryos_affected_the_same_way_as_ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-02-11T23:11:11.563" LastActivityDate="2018-02-11T23:11:11.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14743" PostTypeId="2" ParentId="14740" CreationDate="2018-02-11T21:44:03.470" Score="0" Body="&lt;p&gt;Well.... I went ahead and ran it from a pin drive without installing and I now no longer have the option to boot from a pin drive in the menu at boot!! The Linux kernel in this distro is 4.13 and this is the same issue reported on the ubuntu support site. Although the option to boot from usb is no longer available it still boots from a pin drive and the Elementary OS seems to run fine. I will just have to remove bootable usb before boot to boot into Windows. If anyone has info on the nature and extent of the effects this may have had on my bios please let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is list of the affected machines from ubuntu: &lt;a href=&quot;https://bugs.launchpad.net/bugs/1734147&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/bugs/1734147&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13696" LastActivityDate="2018-02-11T21:44:03.470" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14744" PostTypeId="2" ParentId="14734" CreationDate="2018-02-12T02:09:49.593" Score="0" Body="&lt;p&gt;Not sure if this will be a good fix for you but many people using Logitech devices have had a great deal of luck using the HIDPoint drivers to get devices working. Here is a link to their page:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.hidpoint.com/hidpoint&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.hidpoint.com/hidpoint&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, I'm not sure if this will help with your particular device or issue but it may be a good starting point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-12T02:09:49.593" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14755" PostTypeId="1" CreationDate="2018-02-13T15:03:27.177" Score="0" ViewCount="251" Body="&lt;p&gt;Booted up nicely, I first choose install.&lt;br&gt;&#xA;The e logo appeared and then this error message came.&lt;br&gt;&#xA;The same error message happens when I choose boot without installing.&lt;br&gt;&#xA;What could be wrong ?&lt;br&gt;&#xA;System:&lt;br&gt;&#xA;-GA-H270M-DS3H&lt;br&gt;&#xA;-Intel i7 6700K&lt;br&gt;&#xA;-16GB Crucial RAM&lt;br&gt;&#xA;-spare 250 GB Samsung SSD with macOS-HS installed.&lt;br&gt;&#xA;Windows 10 and macOS are successfully running on separate SSD's that are not connected during my elementary OS install attempt.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/twNHO.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/twNHO.jpg&quot; alt=&quot;Error during setup&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13709" LastEditorUserId="16827" LastEditDate="2019-04-13T15:36:26.443" LastActivityDate="2023-12-19T03:10:36.343" Title="Cannot install or try live elementary OS" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14756" PostTypeId="2" ParentId="14483" CreationDate="2018-02-13T15:05:43.800" Score="0" Body="&lt;p&gt;Same here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you use plymouth splash screen for decrypting Luks at boot?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes, there seems to be a bug since years.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the update came drivers for nvidia. If installed if have the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try booting in recovery mode then luks passward can be entered in textmode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try deinstalling the nivida drivers in AppCenter&lt;/p&gt;&#xA;" OwnerUserId="13710" LastActivityDate="2018-02-13T15:05:43.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14757" PostTypeId="1" CreationDate="2018-02-13T15:23:52.337" Score="0" ViewCount="111" Body="&lt;p&gt;Please forgive me if this question has already been asked. The fact is that I do not speak English well.&#xA;What is the problem? The system correctly identified my printer and found drivers for it, installed (Canon LBP2900). In the settings of the system / printers, it is displayed. But if I send a file from the same WPS or from the image viewer, nothing happens.&lt;/p&gt;&#xA;" OwnerUserId="13711" LastActivityDate="2018-02-14T03:09:48.393" Title="Why does not my printer work?" Tags="|drivers|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14758" PostTypeId="2" ParentId="14755" CreationDate="2018-02-13T16:08:08.653" Score="0" Body="&lt;p&gt;Seems I had to use the older 2.0 USB port on the back.&#xA;But still I wonder what people with only USB 3.0 ports have to do then (besides burning a DVD) ?&#xA;I'm typing this on the &quot;try without installing&quot; option of Elemenary :) .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My own best guess is that the Elementary.ISO doesn't have a compatible driver for my mainboard.&lt;/p&gt;&#xA;" OwnerUserId="13709" LastEditorUserId="13709" LastEditDate="2018-02-13T16:13:47.727" LastActivityDate="2018-02-13T16:13:47.727" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14760" PostTypeId="2" ParentId="9407" CreationDate="2018-02-13T23:09:21.683" Score="1" Body="&lt;p&gt;I was playing with Bitwig, was working nicely on Ubuntu, but I really did not do anything more than just setup and played few samples. I hear nice words about it.&lt;/p&gt;&#xA;" OwnerUserId="12595" LastActivityDate="2018-02-13T23:09:21.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14761" PostTypeId="1" CreationDate="2018-02-14T01:12:07.583" Score="1" ViewCount="59" Body="&lt;p&gt;Recently (after recent updates) I noticed that I am seeing some freezing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To replicate:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1- Boot up desktop PC with GeForce GTX 750 card, 32 GB of RAM and an Intel Core i7-2600 CPU @ 3.40GHz CPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2- Everything loads fine. Let PC sit for a few minutes just in case. Then try to launch Applications menu - five second or more delay. Type text into Applications menu - 7 to 10 second delay. Right click anywhere in Firefox - 10 second delay. So then I tried epiphany - right clicking works great, yet launching the epiphany settings/etc has that same delay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3- Launch a keyboard launcher (previously closed) like synapse. Apps launch right away. Launch Chrome, terminal, Files browser - zero delays. Works great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 - Tried this with htop and glances running - nothing spiking or showing up that seemed odd. Nothing standing out in the logs, either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here's the tltr.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ran updates, menu, Firefox right clicking all have delay - Chrome, synapse, terminal, Files do not. It's not hardware as it's replicatable and persistent only with some elements of the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way I can narrow down what the cause is? Tried multiple kernels and don't believe it's the video card.&lt;/p&gt;&#xA;" OwnerUserId="13173" LastActivityDate="2018-02-14T03:57:59.247" Title="Responsiveness delay in menu, most apps and right clicking" Tags="|menu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14762" PostTypeId="2" ParentId="14757" CreationDate="2018-02-14T03:09:48.393" Score="1" Body="&lt;p&gt;Sounds like it may not be sent to the right printer....or the printer needs to be power cycled. In the printer settings, you should note if the printer appears with a green indicator over the printer icon. If not, it's not ready t print.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually when I print, I go to print, a dialog box asking me to choose my printer pops up (very important step), I select the correct printer and then hit the Print button within the dialog box.&lt;/p&gt;&#xA;" OwnerUserId="13173" LastActivityDate="2018-02-14T03:09:48.393" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14763" PostTypeId="2" ParentId="14761" CreationDate="2018-02-14T03:57:59.247" Score="1" Body="&lt;p&gt;Solved it. Well, basically with some tough love.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I purged a LOT (but not critical stuff) of my ~./config and ~./local directories and I also purged my ~./mozilla directory. My gut tells me the culprit was a combination of the group of these configs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some things to note - I use a dedicated home partition. So this means when I did a clean install using the same dedicated home, the problem persisted. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After cleaning out what I described above (and understanding what data would be gone and what would not), things worked just fine.&lt;/p&gt;&#xA;" OwnerUserId="13173" LastActivityDate="2018-02-14T03:57:59.247" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14764" PostTypeId="2" ParentId="14658" CreationDate="2018-02-14T05:25:44.123" Score="1" Body="&lt;p&gt;Installing Intel Graphics driver along with nVidia in Windows fixed the issue. Actually I did this while trying to fix another issue where brightness control was not working in Windows - got the Intel drivers and installed it. That did fix the brightness control issue and as a bonus fixed the resolution issue with grub booting to Windows. &lt;/p&gt;&#xA;" OwnerUserId="13606" LastActivityDate="2018-02-14T05:25:44.123" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14765" PostTypeId="2" ParentId="13922" CreationDate="2018-02-14T06:43:58.770" Score="0" Body="&lt;p&gt;It's the problem from browser side.. &#xA;So browser won't work properly if the upload size or download size is great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use Firefox or chromium browser for freeze free operations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no other solutions! &#xA;May be the future update of chrome will not freeze.&lt;/p&gt;&#xA;" OwnerUserId="13677" LastActivityDate="2018-02-14T06:43:58.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14766" PostTypeId="1" AcceptedAnswerId="14794" CreationDate="2018-02-14T06:57:05.453" Score="0" ViewCount="523" Body="&lt;p&gt;I have hp pavallion AU003tx with nvidia 940MX 2gb.&#xA;I have dual boot eOS and windows 10. &#xA;When i right click  over applications in windows10 there is option to select the processor ( intel or nvidia) but in eOS everything is open with intel.&#xA;I need to run application in eOs with nvidia.&#xA;How can i do ? &#xA;Is it possible that feature to switch processor in eOs?&#xA;Sometimes i need external processor when i am using kdenlive .&lt;/p&gt;&#xA;" OwnerUserId="13677" LastActivityDate="2018-02-15T14:42:48.870" Title="How can i use my graphic card?" Tags="|graphic-drivers|graphics|processes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14767" PostTypeId="1" CreationDate="2018-02-14T09:58:18.867" Score="0" ViewCount="2886" Body="&lt;p&gt;i need a newer version of openvpn installed since i need the support for ncp-ciphers. How would be the correct way of installing a newer version of openvpn that is not in the repo?&lt;/p&gt;&#xA;" OwnerUserId="13718" LastActivityDate="2019-12-07T07:01:20.160" Title="I need to install openvpn 2.4, how would i go about this?" Tags="|openvpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14769" PostTypeId="1" CreationDate="2018-02-14T14:06:18.200" Score="1" ViewCount="1623" Body="&lt;p&gt;I have multiple network profiles, (one for DHCP another for fixed ip for my work, another fixed ip profile for config specific hardware.. etc etc..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any Way to change wired network profiles like WIFI network connections like any linux distro? &#xA;Many thanks&lt;/p&gt;&#xA;" OwnerUserId="13721" LastActivityDate="2018-12-18T11:52:12.950" Title="Change network profile" Tags="|networking|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14771" PostTypeId="2" ParentId="7224" CreationDate="2018-02-14T15:42:56.530" Score="0" Body="&lt;p&gt;I would also recommend using their snap package.&lt;br&gt;&#xA;A non command-line way of doing that would be to:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;a href=&quot;https://appcenter.elementary.io/com.github.bartzaalberg.snaptastic.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snaptastic&lt;/a&gt; from the AppCenter&lt;/li&gt;&#xA;&lt;li&gt;Visit: &lt;a href=&quot;https://snapcraft.io/ipfs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/ipfs&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click Install&lt;/li&gt;&#xA;&lt;li&gt;Install snap package using Snaptastic.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-14T15:42:56.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14772" PostTypeId="1" AcceptedAnswerId="14775" CreationDate="2018-02-14T16:10:16.553" Score="3" ViewCount="5715" Body="&lt;p&gt;I noticed that since a while the AppCenter is opened when I boot into elementary OS. I'm not revering to checking updates in the background, I mean the AppCenter window is opened. Is there a way to disable this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AppCenter isn't listed in System Settings &gt; Applications &gt; Startup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The autostart file &lt;code&gt;/etc/xdg/autostart/io.elementary.appcenter-daemon.desktop&lt;/code&gt; contains:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=AppCenter Daemon&#xA;Comment=Browse and manage apps&#xA;Exec=io.elementary.appcenter -s&#xA;Icon=system-software-install&#xA;Terminal=false&#xA;Type=Application&#xA;NoDisplay=true&#xA;X-GNOME-AutoRestart=true&#xA;X-GNOME-Autostart-Phase=Applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't seem to have AppCenter related items in &lt;code&gt;/etc/systemd/system&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: To clarify, it's fine that AppCenter is opened in the background for update checking etc. The above mentioned .desktop file for example opens the AppCenter silently, so without opening the window.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-02-14T20:04:40.200" LastActivityDate="2022-12-28T19:52:13.753" Title="Prevent AppCenter window opening on startup?" Tags="|appcenter|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14773" PostTypeId="2" ParentId="14767" CreationDate="2018-02-14T18:18:34.837" Score="2" Body="&lt;p&gt;There is a wiki on the OpenVPN website that is quite good and will walk you through the steps. You should be able to follow the instructions as though you are installing for Ubuntu 16.04 which elementary 0.4.1 is based upon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://community.openvpn.net/openvpn/wiki/OpenvpnSoftwareRepos&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://community.openvpn.net/openvpn/wiki/OpenvpnSoftwareRepos&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-14T18:18:34.837" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14774" PostTypeId="2" ParentId="14769" CreationDate="2018-02-14T18:25:52.963" Score="0" Body="&lt;p&gt;If you open System Setting and then Network, you can click on Ethernet. That will bring up the information for the wired connection and directly below the information are two buttons, Edit Connections and Advanced Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I understand the question correctly, you should find what you're looking for within those two areas.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-14T18:25:52.963" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14775" PostTypeId="2" ParentId="14772" CreationDate="2018-02-14T18:43:41.627" Score="5" Body="&lt;p&gt;Rename the io.elementary.appcenter-daemon.desktop to prevent startup.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/xdg/autostart/&#xA;&#xA;sudo mv io.elementary.appcenter-daemon.desktop io.elementary.appcenter-daemon.desktop.bak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-02-14T18:43:41.627" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14778" PostTypeId="1" AcceptedAnswerId="14779" CreationDate="2018-02-14T20:47:22.967" Score="1" ViewCount="874" Body="&lt;p&gt;Whenever I hit &lt;code&gt;sudo apt update&lt;/code&gt; I get this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:6 http://archive.canonical.com loki Release    &#xA;  404  Not Found [IP: 91.189.91.15 80]&#xA;E: The repository 'http://archive.canonical.com loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="13128" LastEditorUserId="13128" LastEditDate="2018-02-14T21:56:03.577" LastActivityDate="2018-12-12T07:01:25.273" Title="Loki release 404 not found problem" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14779" PostTypeId="2" ParentId="14778" CreationDate="2018-02-14T21:17:44.090" Score="0" Body="&lt;p&gt;If that particular repository is not needed for anything you can delete it from &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; by right clicking on Files, selecting 'New Window as Administrator' then navigating to the folder previously mentioned.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you've done that, try &lt;code&gt;sudo apt update&lt;/code&gt; and all should be fine. It would also be a good idea to apply any updates that are found by &lt;code&gt;sudo apt upgrade&lt;/code&gt; or by using the App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, this is only a solution in the event that this repository isn't needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-14T21:17:44.090" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14780" PostTypeId="1" CreationDate="2018-02-14T23:33:53.413" Score="1" ViewCount="970" Body="&lt;p&gt;I have an issue with a snap elementary. I just installed the polarr photo editor and I think it's using an incorrect resolution. How can I correct this?&lt;/p&gt;&#xA;" OwnerUserId="9893" LastActivityDate="2018-02-15T01:14:23.343" Title="Snaps on elementary" Tags="|applications|camera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14781" PostTypeId="2" ParentId="14780" CreationDate="2018-02-15T01:14:23.343" Score="1" Body="&lt;p&gt;This is a bit embarrassing, sorry, but I've just reopened the app to take a screenshot and it seems the problem has gone away, everything looks okay now. Thanks for your time!&lt;/p&gt;&#xA;" OwnerUserId="9893" LastActivityDate="2018-02-15T01:14:23.343" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14783" PostTypeId="1" CreationDate="2018-02-15T05:36:19.893" Score="0" ViewCount="90" Body="&lt;p&gt;I paid twice for the download but I am having so many problems with the slowest download I ever experienced.  How about 14kb/sec.  At this rate, it can take over a day to complete it, if it completes it.  It hung up on me twice and had to start all over again.  Due to the slowness, I can see where it would hang up.  If I can use Torrent, how do I go about to do that?  If all else fails, how can I order a flash drive with the os on it?  That would solve my problem.  Where I live doesn't help either.  I am off the beaten path relying on the slowest internet provider and there is nothing I can do.  If you can please help me with this and like I said earlier, I would be happy to get a flash or USB drive with the os on it.  Thank you very much.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mel&lt;/p&gt;&#xA;" OwnerUserId="13728" LastActivityDate="2018-04-05T09:06:05.640" Title="I tried downloading elementaryos 3 times but is it ever so slow" Tags="|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14784" PostTypeId="2" ParentId="14783" CreationDate="2018-02-15T06:39:30.627" Score="2" Body="&lt;p&gt;When you click &quot;Download elementary OS&quot; button on the download page, there is a magnet icon near the download button. Click on that icon to get the torrent magnet link and use your a torrent downloader like &lt;a href=&quot;https://www.utorrent.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;uTorrent&lt;/a&gt; to download it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9OoSd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9OoSd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-15T06:39:30.627" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14785" PostTypeId="2" ParentId="14769" CreationDate="2018-02-15T07:10:37.877" Score="2" Body="&lt;p&gt;The buttons mentioned by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/14774/13725&quot;&gt;linux_tim&lt;/a&gt; just provide configurations option of the network, not change to which network you want to connect to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;code&gt;nmtui&lt;/code&gt;, which is a text-based GUI to choose/configure network profiles.&lt;br&gt;&#xA;Type &lt;code&gt;nmtui-connect&lt;/code&gt; in the terminal. Then you can choose which network profile you want to activate/deactivate.&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-15T07:10:37.877" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14786" PostTypeId="2" ParentId="14739" CreationDate="2018-02-15T07:49:10.800" Score="1" Body="&lt;p&gt;It is called autoscrolling and the application must provide explicit support for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Answer taken from &lt;a href=&quot;https://askubuntu.com/a/993672&quot;&gt;askubuntu&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;with Firefox version 57 the path is the following: Menu ➜ Preferences ➜ General, then all the way down in the Browsing section check the box Use auto scrolling.&#xA;  You can also just type auto in the search field once you're in the Preferences window.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-15T07:49:10.800" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14787" PostTypeId="2" ParentId="14728" CreationDate="2018-02-15T08:16:30.423" Score="0" Body="&lt;p&gt;In other terminal e.g. gnome-terminal, that is called &lt;code&gt;Scroll on output&lt;/code&gt; and you can disable it. I can't find any option to disable it on pantheon-terminal though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For deleting line in terminal, position the cursor to the end of the line and press &lt;code&gt;Ctrl + u&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-15T08:16:30.423" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14788" PostTypeId="2" ParentId="12276" CreationDate="2018-02-15T10:08:45.683" Score="0" Body="&lt;p&gt;Add network disks to fstab with options:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uid=1XXX,gid=1XXX,nofail,x-gvfs-show,x-gvfs-name=driveName&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Your &lt;code&gt;uid&lt;/code&gt; and &lt;code&gt;gid&lt;/code&gt; give you write permissions,&#xA;&lt;code&gt;gvfs-&lt;/code&gt; options show mounted disk ass a tab in pantheon (desktop manager).&lt;/p&gt;&#xA;" OwnerUserId="13731" LastEditorUserId="578" LastEditDate="2018-02-15T13:33:09.500" LastActivityDate="2018-02-15T13:33:09.500" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14789" PostTypeId="1" CreationDate="2018-02-15T10:09:16.377" Score="1" ViewCount="76" Body="&lt;p&gt;Everything works fine until the partitioning screen&#xA;&lt;a href=&quot;https://i.imgur.com/dgVGPcl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Selecting custom installation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After selecting my sda3 partition (ex Kubuntu) as root mountpoint I get this prompt&#xA;&lt;a href=&quot;https://i.imgur.com/FEcki7q.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Selecting sda3 partition&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.imgur.com/P5IYNgk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Setting sda3 partition as ext4 root mountpoint&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After pressing &quot;continue&quot; the installation stucks (I've tried leaving the installation for a whole night, but nothing happened)&#xA;&lt;a href=&quot;https://i.imgur.com/kXf4AwU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;The screen of death&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.imgur.com/AcCBiZT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Infinite loading&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried formatting the partition in advance, but the result is always the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also noticed that I can quit the installation, during this problem, and I can be hijacked to the desktop session. It seems also, after this procedure, that gparted can't be opened (I tried also opening it in the console, but without any success or error text).&lt;/p&gt;&#xA;" OwnerUserId="13732" LastActivityDate="2018-02-15T11:01:07.610" Title="Installation stuck after selecting a partition as an ext4 &quot;\&quot; mountpoint" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14790" PostTypeId="1" CreationDate="2018-02-15T10:50:48.913" Score="0" ViewCount="392" Body="&lt;p&gt;I am not able to update my system for a long time. This is the failure text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to fetch http://packages.elementary.io/appcenter/dists/xenial/main/dep11/Components-amd64.yml  Could not open file /var/lib/apt/lists/partial/packages.elementary.io_appcenter_dists_xenial_main_dep11_Components-amd64.yml.xz - open (13: Permission denied) [IP: 104.28.4.44 80]&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tamas&lt;/p&gt;&#xA;" OwnerUserId="7408" LastEditorUserId="16827" LastEditDate="2019-04-12T17:31:44.397" LastActivityDate="2019-04-12T17:32:00.697" Title="Updates failure" Tags="|updates|appcenter|apt|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="14791" PostTypeId="2" ParentId="14789" CreationDate="2018-02-15T11:01:07.610" Score="1" Body="&lt;p&gt;Ok. I solved the problem:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I started a live session&lt;/li&gt;&#xA;&lt;li&gt;I opened gparted&lt;/li&gt;&#xA;&lt;li&gt;I formatted the partition where I wanted to install the system&lt;/li&gt;&#xA;&lt;li&gt;I started the installer in the same live session&lt;/li&gt;&#xA;&lt;li&gt;I followed the same procedure as before&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I don't know why things in this way worked, but they worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.imgur.com/F4xcjgQ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Image Proof&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13732" LastActivityDate="2018-02-15T11:01:07.610" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14792" PostTypeId="2" ParentId="12276" CreationDate="2018-02-15T12:31:15.577" Score="0" Body="&lt;p&gt;One other option if you dont want to edit files is to use gigolo. go to the app store and search for gigolo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The gigolo app is very easy and you can add all the shares you want nice and quick and you can also remove with the same ease. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once installed add gigolo to your startup folder and then it will be opened at start up.&lt;/p&gt;&#xA;" OwnerUserId="12218" LastActivityDate="2018-02-15T12:31:15.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14793" PostTypeId="2" ParentId="4977" CreationDate="2018-02-15T13:48:35.590" Score="0" Body="&lt;p&gt;The best way IMO is to install a terminal you're already used to that already has that function. In my case, I installed gnome-terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gnome-terminal&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then ran these two commands to make it the default:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec gnome-terminal&#xA;gsettings set org.gnome.desktop.default-applications.terminal exec-arg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I'm used to the cmd+k key to clear the terminal in macOS, I added &lt;code&gt;Super+K&lt;/code&gt; (Super is the windows key) as a shortcut combination for &lt;code&gt;Reset and Clear&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13737" LastActivityDate="2018-02-15T13:48:35.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14794" PostTypeId="2" ParentId="14766" CreationDate="2018-02-15T14:42:48.870" Score="1" Body="&lt;p&gt;Open AppCentre and go to the updates tab. Wait some seconds til it loads everything and go to the Drivers section.&#xA;There install the latest nvidia driver (the one that has a higher number, in my case is 384, it may be different in yours).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it finishes installing everything, reboot your system. Now go to Applications and search for &quot;NVIDIA X Server Settings&quot; and open it. You can now choose what GPU you want to use. Beware you'll have to logout and login again every time you want to switch GPUs.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-02-15T14:42:48.870" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14796" PostTypeId="1" CreationDate="2018-02-16T05:26:50.373" Score="0" ViewCount="2349" Body="&lt;p&gt;How can I install HPLIP software in elementary OS?&#xA;HPLIP software is not available in their website for elementary as specific.&#xA;For Loki, which version of Ubuntu should I choose?&lt;/p&gt;&#xA;" OwnerUserId="13745" LastEditorUserId="16827" LastEditDate="2019-04-13T07:11:55.613" LastActivityDate="2019-04-13T07:11:55.613" Title="HPLIP Drive in elementary OS" Tags="|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14797" PostTypeId="2" ParentId="14796" CreationDate="2018-02-16T05:42:46.230" Score="0" Body="&lt;p&gt;It is already in the Ubuntu repository. Enter &lt;code&gt;sudo apt-get install hplip&lt;/code&gt; in the terminal to install.&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-16T05:42:46.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14798" PostTypeId="1" AcceptedAnswerId="14830" CreationDate="2018-02-16T06:09:50.610" Score="1" ViewCount="167" Body="&lt;p&gt;I'm kind of new to this world, I'm trying to install this dsp correction since I used Equalizer APO in windows and now I'm trying to use it but with no success.&#xA;This is the rep: &lt;a href=&quot;https://github.com/bmc0/dsp/wiki/System-Wide-DSP-Guide&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bmc0/dsp/wiki/System-Wide-DSP-Guide&lt;/a&gt;&#xA;I followed all the instructions but when I type this command &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;pacmd load-module module-ladspa-sink sink_name=dsp master=alsa_output.pci-0000_00_14.2.analog-stereo plugin=ladspa_dsp label=ladspa_dsp.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I get this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Module load failed.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I really don't know what I'm doing wrong, but I'll be glad to provide more info if you want me to. Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="13746" LastActivityDate="2018-02-18T17:09:11.267" Title="Problems installing DSP correction" Tags="|software-installation|system|sound|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14799" PostTypeId="1" CreationDate="2018-02-16T10:32:52.757" Score="0" ViewCount="53" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7o5gh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7o5gh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is this black rectangle with a &quot;do not enter&quot; sign in it? When clicking on it, an empty pull down menu shows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13749" LastActivityDate="2018-02-16T11:43:37.617" Title="What is this black rectangle with a &quot;do not enter&quot; sign in it in the top panel?" Tags="|icons|" AnswerCount="1" CommentCount="1" ClosedDate="2018-02-21T10:42:50.130" ContentLicense="CC BY-SA 3.0" />
  <row Id="14800" PostTypeId="2" ParentId="14799" CreationDate="2018-02-16T11:43:37.617" Score="2" Body="&lt;p&gt;It means you are running an application which either has no icon or which is unable to display the icon correctly. Dropbox for example has this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are you running Dropbox? If so then you can fix it using the solution here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12828/problems-with-dropbox/12839#12839&quot;&gt;Problems with Dropbox&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it is some other application then there is likely a similar fix needed.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2018-02-16T11:43:37.617" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14801" PostTypeId="1" CreationDate="2018-02-16T13:34:58.457" Score="0" ViewCount="3867" Body="&lt;p&gt;I And My Friend Both Have eOS installed And We Want To Enable Network Sharing So We Can Access each other's files.&#xA;Since We Both Are New To eOS We Don't Know How To Do That Can Any One Please Explain to Me How To Enable Network Sharing. We Want To Share All Of Our Drives With Each Other.&lt;/p&gt;&#xA;" OwnerUserId="13692" LastActivityDate="2018-03-06T09:14:34.203" Title="Network Sharing" Tags="|release-loki|networking|sharing|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14802" PostTypeId="1" AcceptedAnswerId="14852" CreationDate="2018-02-16T14:35:05.257" Score="3" ViewCount="830" Body="&lt;p&gt;in power settings I configured the power button to suspend and it works, however the system still shuts down when it is in login screen after pressing the power button. is there anyway to fix this?&lt;/p&gt;&#xA;" OwnerUserId="2608" LastActivityDate="2018-02-20T16:55:39.987" Title="power button shutdown instead of suspend on login screen" Tags="|suspend|power|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14803" PostTypeId="2" ParentId="14801" CreationDate="2018-02-16T18:46:23.177" Score="1" Body="&lt;p&gt;Oh for that you have to insall Samba by using this &lt;strong&gt;&lt;em&gt;sudo apt-get install samba&lt;/em&gt;&lt;/strong&gt; command from terminal Or you can open the app store and do a search for samba. Once install you should be able to right-click on a folder to share. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other way is to change the permissions of the &lt;strong&gt;Public&lt;/strong&gt; folder in your Home directory to 777(read,write,execute); I personally would not use the 2nd option but is an option. So once you do either of these you should be able to see each others folders/files by clicking on the &quot;Entire Network&quot; in the Network section within the file manager(pantheon-files).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please remember that you both need to be on the same network so see each others PCs/Laptops.&lt;/strong&gt; If you are not within the same network then you will have to use a service like dropbox or google drive.&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2018-02-16T18:46:23.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14805" PostTypeId="1" AcceptedAnswerId="14957" CreationDate="2018-02-16T21:09:07.697" Score="0" ViewCount="23" Body="&lt;p&gt;I have a small black screen in the top left of my screen when using proprietary NVIDIA driver (shown in screenshots below).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried changing the driver after I noticed this and that fixed it (but the other driver had a different bug).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know this isn't part of my laptop since it only exists when using Elementary OS, if I restart it doesn't show for a while, and the other driver had it go away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yldGs.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yldGs.jpg&quot; alt=&quot;this spec&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5230" LastActivityDate="2018-03-01T16:58:37.380" Title="Small spec in top left of screen - Driver issue" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14806" PostTypeId="1" CreationDate="2018-02-16T21:12:52.717" Score="0" ViewCount="1026" Body="&lt;p&gt;Which commands should I use when creating keyboard shortcuts for shutdown and reboot in Loki?&lt;/p&gt;&#xA;" OwnerUserId="12361" LastEditorUserId="12361" LastEditDate="2018-02-17T17:18:26.287" LastActivityDate="2019-04-14T03:03:10.633" Title="Shortcuts for proper shutdown and reboot in Loki?" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14808" PostTypeId="2" ParentId="14806" CreationDate="2018-02-17T02:03:12.557" Score="1" Body="&lt;p&gt;Based upon the lack of description in the original question I am going to take a shot in the dark in believing you're asking how to create keyboard shortcuts for shutdown and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is the case, you can open System Settings-&gt;Keyboard. Then click on Shortcuts, then Custom. Here you can enter the command you wish to run then create a two key accelerator. For instance in command, I typed &lt;code&gt;reboot&lt;/code&gt; then clicked on 'New accelerator' and held the Super Key and the letter 'R' which created a shortcut to reboot by holding my Super Key and hit 'R'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, not sure if this was what you're looking for but this is how you create custom keyboard shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!! &lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-17T02:03:12.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14809" PostTypeId="2" ParentId="9027" CreationDate="2018-02-17T03:18:57.880" Score="0" Body="&lt;p&gt;For me what worked was using dconf-editor. Just install it and is very simple to configure. I followed this tutorial &lt;a href=&quot;https://petermolnar.net/elementaryos-customize-date-time-in-wingpanel/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary OS customization&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13421" LastActivityDate="2018-02-17T03:18:57.880" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14812" PostTypeId="2" ParentId="14504" CreationDate="2018-02-17T10:56:33.380" Score="-1" Body="&lt;p&gt;I just applied the update and have the same problem.&#xA;I was able to enter terminal mode by pressing &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt;.&#xA;I ran the full upgrade; it didn't change anything the first time,&#xA;but I rebooted and did the update and full upgrade again, and it worked!&lt;/p&gt;&#xA;" OwnerUserId="13758" LastEditorUserId="84" LastEditDate="2018-02-20T09:59:56.867" LastActivityDate="2018-02-20T09:59:56.867" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14814" PostTypeId="1" AcceptedAnswerId="14849" CreationDate="2018-02-17T15:45:13.957" Score="3" ViewCount="1768" Body="&lt;p&gt;Recently I've added elementary OS as a dual boot to my Lenovo w540. On the windows 10 side, I can push a lot more volume out of the on-board speakers than from elementary OS. When I push the volume past 100%, the volume gets much closer to what I can get from windows. The only problem is, I need to go to the sound settings menu to do this. If I hit the volume up key, it will take the volume from 150% or whatever the max is down to 100%, or from 0% up to 100% but no further. Volume down key will increment down naturally from 150%, so only the volume up key is less than idea.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to allow volume key to push volume levels past 100%?&lt;/p&gt;&#xA;" OwnerUserId="13760" LastEditorUserId="16827" LastEditDate="2019-05-09T21:22:45.710" LastActivityDate="2019-05-09T21:22:45.710" Title="Volume key won't push volume over '100%'" Tags="|audio|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14815" PostTypeId="2" ParentId="14496" CreationDate="2018-02-17T16:22:35.197" Score="0" Body="&lt;p&gt;The first thing I would try after installing is try and update using the command line rather than the appcentre.   e.g. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;sudo apt upgrade&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you should be up to date.  Then watch out for any new updates, and see if you have issues then.  &lt;/p&gt;&#xA;" OwnerUserId="441" LastActivityDate="2018-02-17T16:22:35.197" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14816" PostTypeId="2" ParentId="14806" CreationDate="2018-02-17T16:25:19.860" Score="1" Body="&lt;p&gt;I usually use the commands &lt;code&gt;poweroff&lt;/code&gt; and &lt;code&gt;reboot&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course you can use the &lt;code&gt;shutdown&lt;/code&gt; command with options, but I find the first commands simpler! :)&lt;/p&gt;&#xA;" OwnerUserId="441" LastActivityDate="2018-02-17T16:25:19.860" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14817" PostTypeId="2" ParentId="11574" CreationDate="2018-02-17T16:32:01.087" Score="1" Body="&lt;p&gt;I have experienced this type of problem on a number of different systems, but after a lot of work I tracked it down to the lid being opened (after suspend) not being recognised.  The fix was simple in the end, just add the following to you kernel parameters&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;button.lid_init_state=open&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Basically this tells ACPI to emit an extra open event when waking from suspend which should stop the system shutting down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For GRUB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press e when the menu shows up and add this open to the end of the linux line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;linux /boot/vmlinuz-linux root=UUID=978e3e81-8048-4ae1-8a06-aa727458e8ff quiet splash &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Ctrl+x to boot with these parameters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a general documentation about how to pass kernel parameters have a look at the always awesome Arch wiki: &lt;a href=&quot;https://wiki.archlinux.org/index.php/Kernel_parameters&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Kernel_parameters&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="441" LastEditorUserId="441" LastEditDate="2018-02-18T16:34:45.977" LastActivityDate="2018-02-18T16:34:45.977" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14818" PostTypeId="2" ParentId="14814" CreationDate="2018-02-17T18:01:59.167" Score="1" Body="&lt;p&gt;I believe what you may be looking for can be easily accomplished by installing elementary-Tweaks then making an adjustment. Here are the commands to do so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, add a repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run update:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, install Tweaks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now that you have &quot;unlocked&quot; software properties and installed Tweaks, you can open it by opening System Settings then click on Tweaks which is in the top &quot;Personal&quot; section. In Tweaks, click on Miscellaneous. This is where you can jack-up the Max Volume.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, I believe this is what you're looking for and be advised...&lt;strong&gt;this applies to Loki only.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-17T18:01:59.167" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14819" PostTypeId="1" CreationDate="2018-02-17T22:52:43.683" Score="0" ViewCount="891" Body="&lt;p&gt;I've installed Polarr through Snaptastic. When right clicking in Files on an image file, Polarr does not appear in the context menu, not even in View All Applications. How do I put it there? If it will be a feature in Juno, then it's OK.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2018-02-18T18:32:47.853" LastActivityDate="2018-02-20T16:02:15.307" Title="App installed as snap in right-click context menu" Tags="|release-loki|camera|context-menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14822" PostTypeId="2" ParentId="14814" CreationDate="2018-02-18T07:26:52.733" Score="1" Body="&lt;p&gt;&lt;code&gt;pactl set-sink-volume $ID +10%&lt;/code&gt; to increase volume of sink id $ID by 10%. $ID can be found using &lt;code&gt;pactl list sinks&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can test it first from the terminal and if it works you can put the command in a simple script and set a custom shortcut to call it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My &lt;code&gt;pactl list sinks&lt;/code&gt; output is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sink #10&#xA;    State: Running&#xA;    ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so my $ID is 10. If you have multiple audio card maybe you will have to choose one which you want to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;increase-vol.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;pactl set-sink-volume 10 +10%&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately I can't find any way to rebind the Volume Up key (or normally identified as XF86AudioRaiseVolume by the sytem).&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-18T07:26:52.733" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14823" PostTypeId="1" CreationDate="2018-02-18T08:47:39.907" Score="0" ViewCount="85" Body="&lt;p&gt;Can we install edubuntu tools  in elemaentry OS by typing sudo apt-get install ubuntu-edu-secondary ? will the system crash?&lt;/p&gt;&#xA;" OwnerUserId="13745" LastActivityDate="2019-05-04T10:43:45.257" Title="Ebubuntu in elementary OS" Tags="|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14824" PostTypeId="1" CreationDate="2018-02-18T09:26:17.550" Score="1" ViewCount="815" Body="&lt;p&gt;Just wondering if elementary OS will install just fine and work with the keyboard and touchpad. Touchscreen support and active stylus support is of course a bonus but not strictly necessary.&lt;/p&gt;&#xA;" OwnerUserId="2872" LastEditorUserId="308" LastEditDate="2018-08-07T17:06:06.080" LastActivityDate="2019-05-05T09:01:40.313" Title="Will elementary OS install fine on the HP Elite X2 1012 G2 tablet?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14826" PostTypeId="2" ParentId="14396" CreationDate="2018-02-18T10:57:38.717" Score="0" Body="&lt;p&gt;May have found a fix for this, do a cheeky upgrade to 5.2:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall all traces of Virtualbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the non-authenticated version of 5.2:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -y 'deb http://download.virtualbox.org/virtualbox/debian xenial contrib'&#xA;wget -q https://www.virtualbox.org/download/oracle_vbox.asc -O- | sudo apt-key add - &#xA;sudo apt-get update&#xA;sudo apt-get install -y dkms&#xA;sudo apt-get install -y virtualbox-5.2 --allow-unauthenticated&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Courtesy of &lt;a href=&quot;https://gist.github.com/ankurk91/2327d4881d71a098e3bfcd0b1c255d83&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/ankurk91/2327d4881d71a098e3bfcd0b1c255d83&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check if dkms is installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | grep virtualbox-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If so, uninstall then reinstall dkms:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge virtualbox-dkms &amp;amp;&amp;amp; \&#xA;sudo apt-get install dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then rebuild the kernel modules:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo /sbin/vboxconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Worked for me at least.&lt;/p&gt;&#xA;" OwnerUserId="13769" LastActivityDate="2018-02-18T10:57:38.717" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14827" PostTypeId="2" ParentId="175" CreationDate="2018-02-18T11:21:05.183" Score="3" Body="&lt;p&gt;The easiest way to format an USB stick on elementary (for now) is to install &quot;Formatter&quot; app from elementary appstore.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-02-18T11:21:05.183" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14828" PostTypeId="2" ParentId="14674" CreationDate="2018-02-18T13:58:22.240" Score="1" Body="&lt;p&gt;In my case, the problem was relationed to the ppa repositories, it can be another thing for you, but you can check if your case is a ppa problem by going to the console and typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HF26I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HF26I.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can check for any errors shown. If something is not right, try to temporarily remove the respective ppa list file on folder &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2018-02-18T13:58:22.240" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14830" PostTypeId="2" ParentId="14798" CreationDate="2018-02-18T17:09:11.267" Score="2" Body="&lt;p&gt;I recently tried to follow that guide you linked and failed as well.&#xA;The problem, as it was for me, is probably a misplaced or misconfigured config file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should check that you have the file named &lt;code&gt;config&lt;/code&gt; (without an extension) in the right folder (/home/USER/.config/ladspa_dsp/), and create it if it's not there.&#xA;Then try running &lt;code&gt;listplugins&lt;/code&gt;: at the beginning you should see something like this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/usr/lib/ladspa/ladspa_dsp.so:&#xA;         ladspa_dsp (2378/ladspa_dsp)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Don't worry about the LADSPA_PATH warning, it's not important.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next you have to check the contents of the config file. In my case, the &lt;code&gt;input_channels=2&lt;/code&gt; was missing, and after fixing that everything worked.&#xA;Try to use the simplest config possible at first, e.g. the example reported in the guide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work, it would be useful to have a more verbose output of the error. It can be obtained by modifying the default.pa as in the guide file and running &lt;code&gt;pulseaudio -v&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="13773" LastActivityDate="2018-02-18T17:09:11.267" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14831" PostTypeId="2" ParentId="14824" CreationDate="2018-02-18T21:30:21.277" Score="1" Body="&lt;p&gt;Your question sparked an interest I had with one of these machines about 3 or 4 months ago as I was seriously thinking of buying one. I did a little research back then and found a couple things in regards to a Linux install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From what I can remember reading, there were issues getting both cameras (front &amp;amp; back) working with the back camera causing the issue. Also, if you are going to dual boot with Windows, you are going to want to disable the Fast Boot option as that can cause some issues while trying to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, in almost all cases, if you are able to boot the machine into a live session via a USB stick and the desktop loads and works then an install should work out just fine. But, remember I said almost! The one advantage is that Ubuntu (the OS on which eOS is based) works directly with HP which helps make the OS/machine compatibility quite good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-18T21:30:21.277" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14832" PostTypeId="1" CreationDate="2018-02-18T21:55:14.830" Score="1" ViewCount="20" Body="&lt;p&gt;So, I must've installed a program and uninstalled some of it's components, cause I have an icon in the top bar which is not working and I have &lt;strong&gt;no&lt;/strong&gt; clue what it is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried manually closing applications in the &quot;System monitor&quot; program, but I have yet to find the one causing this icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have a suggestion to where I should start looking?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/shgLT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/shgLT.jpg&quot; alt=&quot;icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13777" LastActivityDate="2018-02-18T22:08:59.270" Title="Unsure of what program is currently not working in top bar" Tags="|icons|" AnswerCount="1" CommentCount="3" ClosedDate="2018-02-19T13:28:36.577" ContentLicense="CC BY-SA 3.0" />
  <row Id="14833" PostTypeId="2" ParentId="14823" CreationDate="2018-02-18T21:55:45.857" Score="1" Body="&lt;p&gt;You can install the package in question using the command line as it is available in eOS without having to add any additional repos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far as crashes, I installed the package on an install of Loki running on a virtual machine and played around with it for a while and had no ill effects with the OS whatsoever. The Potato Guy app was cool! I also screwed around with the Pencil app and a couple others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, depending upon your machine and speed of your internet connection, there was a large number of packages downloaded and installed which took some time to accomplish. If you have a slow connection, count on having time for a coffee break!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.-Before I installed the above, I had installed the 'software-properties-common' package as I had to do that before installing elementary Tweaks as well as some other apps. You may need to do so as well.&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-18T21:55:45.857" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14834" PostTypeId="2" ParentId="14832" CreationDate="2018-02-18T22:08:59.270" Score="2" Body="&lt;p&gt;It was Dropbox!&#xA;The backend-part of the application is working fine, but the client is apparently not functioning as intended.&#xA;Trying to re-install and thank you!&lt;/p&gt;&#xA;" OwnerUserId="13777" LastActivityDate="2018-02-18T22:08:59.270" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14835" PostTypeId="1" CreationDate="2018-02-18T22:33:06.243" Score="0" ViewCount="1594" Body="&lt;p&gt;is it possible that new USB drives mount automatically&lt;/p&gt;&#xA;&#xA;&lt;p&gt;at this time I have to mount all my pen drives with gnome disk utily,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So is there a script or service that recognize all new pen drives and mountes automatically?&lt;/p&gt;&#xA;" OwnerUserId="13778" LastActivityDate="2018-02-19T16:33:22.550" Title="Mount new USB Drives automatically" Tags="|usb|mount|" AnswerCount="1" CommentCount="0" ClosedDate="2018-02-21T10:29:34.910" ContentLicense="CC BY-SA 3.0" />
  <row Id="14837" PostTypeId="1" CreationDate="2018-02-19T07:26:55.440" Score="1" ViewCount="505" Body="&lt;p&gt;Before Loki I used to do- &lt;code&gt;apt-get remove-indicator-Bluetooth&lt;/code&gt; and it used to work fine but now if I do this whole wing panel get displayed. For my purpose, I don't use Bluetooth at all and I think if I can remove the indicator it would be good. Please let me know if I can remove this icon. Thanks&lt;/p&gt;&#xA;" OwnerUserId="13780" LastEditorUserId="16827" LastEditDate="2019-08-26T16:20:52.343" LastActivityDate="2019-08-26T16:20:52.343" Title="How do I remove Blutooth Indicator?" Tags="|release-loki|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14838" PostTypeId="1" AcceptedAnswerId="14844" CreationDate="2018-02-19T08:46:18.153" Score="4" ViewCount="546" Body="&lt;p&gt;Just installed the very latest version of elementaryOS today. Things went well, except for this annoying volume notification issue! Every 10 seconds, a notification pops up in the top right showing me the volume level. As if I was changing it, but I'm not. This is super distracting and annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GIF showing the UI symptom (wait for it haha):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gfycat.com/RemarkableHarshIndianrockpython&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HDdWu.gif&quot; alt=&quot;animation of the issue&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Found some messages in &lt;code&gt;syslog&lt;/code&gt; that seem related:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Feb 19 00:27:18 desktop-linux gnome-session[1387]: (epiphany:3372): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;Feb 19 00:27:18 desktop-linux gnome-session[1387]: (epiphany:3372): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;Feb 19 00:27:18 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:19 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:20 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.226410 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:21 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:30 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.226410 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:31 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:36 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.226410 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:38 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:27:39 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:00 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.226410 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:01 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:02 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:06 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.226410 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: (process:1652): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.346405 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: me '4' not found in GtkStack&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[101m#033[97m[FATAL 00:26:27.737065]#033[0m app_center_widgets_banner_banner_widget_get_package: assertion 'self != NULL' failed&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[93m[WARNING 00:26:32.737653]#033[0m [Gtk] Child name '5' not found in GtkStack&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[101m#033[97m[FATAL 00:26:32.737708]#033[0m app_center_widgets_banner_banner_widget_get_package: assertion 'self != NULL' failed&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[93m[WARNING 00:26:37.739052]#033[0m [Gtk] Child name '1' not found in GtkStack&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[101m#033[97m[FATAL 00:26:37.739112]#033[0m app_center_widgets_banner_banner_widget_get_package: assertion 'self != NULL' failed&#xA;Feb 19 00:28:07 desktop-linux gnome-session[1387]: #033[93m[WARNING 00:26:42.740948]#033[0m [Gtk] Child name '2' not found in GtkStack&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any assistance would be so appreciated! I'm really close to just installing Debian but I want to stick with elementaryOS if possible.&lt;/p&gt;&#xA;" OwnerUserId="13781" LastEditorUserId="84" LastEditDate="2018-02-19T17:54:07.717" LastActivityDate="2023-11-16T17:20:32.270" Title="AccountService.Sound bug?" Tags="|sound|ubuntu|indicator-sound|" AnswerCount="2" CommentCount="10" ContentLicense="CC BY-SA 3.0" />
  <row Id="14840" PostTypeId="1" CreationDate="2018-02-19T10:09:05.263" Score="1" ViewCount="2021" Body="&lt;p&gt;I've tried to configure my gmail account on elementary OS through the email client, but I didn't succeed. The app always says the password or email is wrong.&#xA;Can you help me? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="13783" LastEditorUserId="84" LastEditDate="2018-05-06T17:05:18.527" LastActivityDate="2018-05-06T17:05:18.527" Title="Email client doesn't work in elementary OS" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14841" PostTypeId="2" ParentId="14840" CreationDate="2018-02-19T13:05:20.863" Score="2" Body="&lt;p&gt;There are a couple things you need to do in order to get gmail working in Mail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check here for the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13569/email-client-gmail&quot;&gt;solution&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2018-02-19T16:47:10.163" LastActivityDate="2018-02-19T16:47:10.163" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14843" PostTypeId="2" ParentId="14835" CreationDate="2018-02-19T16:33:22.550" Score="0" Body="&lt;p&gt;On &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1094669&quot; rel=&quot;nofollow noreferrer&quot;&gt;#1094669&lt;/a&gt; and &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1262270&quot; rel=&quot;nofollow noreferrer&quot;&gt;#1262270&lt;/a&gt;, it seems that this is marked as &lt;code&gt;Won't fix&lt;/code&gt;.&lt;br&gt;&#xA;You can install &lt;code&gt;usbmount&lt;/code&gt; for now. I tested it for a while on a VM. Seems to work fine.&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-02-19T16:33:22.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14844" PostTypeId="2" ParentId="14838" CreationDate="2018-02-19T20:02:47.623" Score="1" Body="&lt;p&gt;There is a bug that was reported some time ago on Launchpad which mimics the issue being posed here. Here is the &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bug Report&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There seems to be what is a viable workaround for this issue in comment number 20 below the initial report.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other fixes shown to be successful include updating pulseaudio to version 10 or above however there seems to be less verification as to whether or not that is a true fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In working with the user posing the original question, the workaround in the Bug Report has worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-19T20:02:47.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14845" PostTypeId="2" ParentId="14837" CreationDate="2018-02-19T20:29:39.897" Score="1" Body="&lt;p&gt;To remove the Bluetooth indicator, I believe the package you are looking for is 'wingpanel-indicator-bluetooth' which, once removed, will remove the indicator for you. In terminal, you can:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove wingpanel-indicator-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That should do it for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-19T20:29:39.897" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14847" PostTypeId="1" CreationDate="2018-02-19T22:16:51.583" Score="2" ViewCount="230" Body="&lt;p&gt;I want to be able to boot from a USB thumb drive to re-install the Elementary OS.  I've installed Elementary OS​ on my old MacBook Air, and it's only a single boot, no dual-boot or Mac OS​ anymore. So my question is how can I change the boot order? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;WHAT I'VE TRIED: 1) When I hold the &quot;Option&quot; key down I get a list of wifi connections to choose from, instead of being able to choose between booting from the USB or the Hard drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Holding down the &quot;OPT CMD 0 F&quot; doesn't work to open up the EFI to make boot order changes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13786" LastEditorUserId="13786" LastEditDate="2018-02-20T01:03:48.477" LastActivityDate="2018-02-20T03:51:18.927" Title="Need to change boot order in an old MacBook Air running only Elementary OS" Tags="|boot|macbook|usb-drive|efi|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14848" PostTypeId="2" ParentId="5595" CreationDate="2018-02-19T22:23:55.990" Score="0" Body="&lt;p&gt;Use &lt;a href=&quot;https://appcenter.elementary.io/com.github.artemanufrij.imageburner.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;Image Burner&lt;/a&gt; in the App Center or &lt;a href=&quot;https://etcher.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Etcher&lt;/a&gt;. Both are easy to use and reliable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rqtEX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rqtEX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-02-19T22:23:55.990" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14849" PostTypeId="2" ParentId="14814" CreationDate="2018-02-20T02:32:58.080" Score="2" Body="&lt;p&gt;So the ultimate solution to this, I was able to figure out how to assign the volume up key to a custom key combination. I used ctrl-alt-Audio Raise Volume to assign to this key. It will not give you a testing volume to show you how loud it is, but it will raise the volume past 100%. I could not figure out how to bind this to the original audio level up key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note I did install xbindkeys before I started, so this may have altered what you are about to see. First add a shortcut with the desired key combo through the original system settings -&gt; keyboard -&gt; shortcuts -&gt; custom menu by clicking the little plus at the bottom. Call this whatever you would like. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SxPUd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SxPUd.png&quot; alt=&quot;Using the system settings, add a shortcut with desired key combo&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After setting this up, open dconf Editor, and navigate to org -&gt; settings-daemon -&gt; plugins -&gt; media-keys -&gt; custom-keybindings -&gt; custom0. For me it was custom0, but choose the index of the key binding you need to alter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once inside, you need to change the change the command to a version of pactl set-sink-volume 10 +10% that works for your computer. This is PACTL not PACT(one). The 10 is the device id for your audio system,  on my computer it was actually 1. The +10% should raise your volume by that percentage, and take it beyond 100% volume if you have the appropriate sound settings box checked when you run this command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best way to accomplish this is to test your command in terminal and then copy paste it later. So copy the command so that the whole line is highlighted as in the image below, and keep that in your clipboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sqQqa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sqQqa.png&quot; alt=&quot;Testing the command in terminal while watching for volume change&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this, you'll need to go back into you dconf Editor window and change the command section of the shortcut for custom0. You need to paste so that when you paste, before hitting enter, there is a special character you can see following the command. Probably a representation of the '\n' newline character. Not 100% sure it's necessary, but this is what worked for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w0rhs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w0rhs.png&quot; alt=&quot;Special command seen after text for command&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One of the things you'll also notice here is I bumped the % up to 750%. I found that when it executes as a key binding, it doesn't change the volume nearly as much per keystroke, so I had to adjust this to my liking. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was also able to recover functionality of my botched default volume key through this menu in dconf Editor as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps someone out there&lt;/p&gt;&#xA;" OwnerUserId="13760" LastActivityDate="2018-02-20T02:32:58.080" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14850" PostTypeId="2" ParentId="14847" CreationDate="2018-02-20T03:51:18.927" Score="1" Body="&lt;p&gt;THIS SOLVED MY PROBLEM, THANKS! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resetting NVRAM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shut down your Mac.&#xA;Locate the following keys on the keyboard: Command (⌘), Option, P, and R.&#xA;Turn on your Mac.&#xA;Press and hold the Command-Option-P-R keys immediately after you hear the startup sound.&#xA;Hold these keys until the computer restarts and you hear the startup sound for a second time.&#xA;Release the keys.&lt;/p&gt;&#xA;" OwnerUserId="13786" LastActivityDate="2018-02-20T03:51:18.927" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14851" PostTypeId="2" ParentId="14819" CreationDate="2018-02-20T16:02:15.307" Score="1" Body="&lt;p&gt;One solution is to create a desktop file and then save it in &lt;/p&gt;&#xA;&#xA;&lt;p&gt;~/.local/share/applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can create a desktop file reading:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=polarr-snap&#xA;Exec=/snap/bin/polarr %u&#xA;Type-Application&#xA;Icon=polarr&#xA;NoDisplay=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you create the text file, you can save it as something like polarr-snap.desktop in the ~/.local/share/applications directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In educating myself in regards to snap packages, I downloaded the VLC snap in elementary running in a Virtual Machine and was able to add it to the context menu doing the above. I found the answer on another forum but can't find that post so I'm unable to reference it here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps and good luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-20T16:02:15.307" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14852" PostTypeId="2" ParentId="14802" CreationDate="2018-02-20T16:55:39.987" Score="2" Body="&lt;p&gt;I believe this to be a solution for what you're wanting to do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a Files window as admin by right clicking Files and selecting &quot;New Window as Administrator.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Navigate in the File System to /etc/systemd and open logind.conf with Scratch Text Editor.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Directly below the line reading #HandlePowerKey=poweroff add a new line of text reading:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HandlePowerKey=suspend&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Close Scratch to save the file then close all other windows and reboot your machine.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Once you reboot, when you are presented the Login Screen you can test the results by pressing the power button which should suspend the machine, not power it off. Now, on my machine at least, when I pressed the power button it took about 3-5 seconds for the machine to suspend.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this answers your question and good luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-20T16:55:39.987" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14856" PostTypeId="1" CreationDate="2018-02-21T02:08:17.903" Score="0" ViewCount="99" Body="&lt;p&gt;Since a few weeks whenever I try to rename a file by hitting the F2 key the file selection moves to either the file above or below the one originally selected, and then the name becomes editable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically, if I navigate to a file with the arrow keys, if the last key was UP, then F2 moves the selections DOWN. If the last key was DOWN, then F2 moves the selection up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues about what is happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should mention that I'm running Pantheon Files on a Ubuntu 17.10 installation with the Gnome Wayland desktop. But up to a few weeks ago, this problem was NOT present :P&lt;/p&gt;&#xA;" OwnerUserId="13798" LastActivityDate="2018-06-21T13:15:55.100" Title="Pantheon Files F2 bug" Tags="|pantheon-files|ubuntu|" AnswerCount="1" CommentCount="1" ClosedDate="2019-05-13T06:55:25.567" ContentLicense="CC BY-SA 3.0" />
  <row Id="14857" PostTypeId="1" CreationDate="2018-02-21T07:46:26.850" Score="2" ViewCount="2352" Body="&lt;p&gt;I like Pantheon, but I do not like Ubuntu. I will use Pantheon if it can be installed on other Linux systems. Now Pantheon is tied to Ubuntu and it's sad. Ported hard and does not work ... Pantheon will be untied from Ubuntu for porting to other distributions? When? On Archlinux it is ported since 2012 ...&lt;/p&gt;&#xA;" OwnerUserId="13799" LastActivityDate="2018-04-23T21:20:42.367" Title="Pantheon DE in other distributions?" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14858" PostTypeId="2" ParentId="14856" CreationDate="2018-02-21T08:35:41.450" Score="1" Body="&lt;p&gt;It is a known bug/regression that the keyboard focus does not properly follow the selection and there is a couple of fixes awaiting review, merging and release.   The keyboard focus is indicated by highlighting the icon but this may not be obvious for icons that are already light in color.  At the moment it is safest to use the context menu on the item and choose &quot;Rename&quot;.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-02-21T08:35:41.450" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14859" PostTypeId="1" CreationDate="2018-02-21T10:18:11.907" Score="0" ViewCount="412" Body="&lt;p&gt;Is there a keyboard shortcut that can be used to manually lock the screen? If not, can it be configured somehow?&#xA;Any pointer to relevant documentation would help.&#xA;Thanks,&#xA;Arjuna&lt;/p&gt;&#xA;" OwnerUserId="13043" LastActivityDate="2018-02-21T10:40:57.093" Title="Lock Screen shortcut setup" Tags="|display|lock|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14860" PostTypeId="2" ParentId="14859" CreationDate="2018-02-21T10:40:57.093" Score="2" Body="&lt;p&gt;Super+L   (Super is the 'Windows' like key on your keyboard)&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-02-21T10:40:57.093" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14861" PostTypeId="2" ParentId="12681" CreationDate="2018-02-21T11:21:54.460" Score="1" Body="&lt;p&gt;I might be a bit late, but today I had the same issue. The solution was to click on sound settings, pick JBL and switch the mode to High Fidelity Playback.&lt;/p&gt;&#xA;" OwnerUserId="13800" LastActivityDate="2018-02-21T11:21:54.460" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14863" PostTypeId="2" ParentId="14857" CreationDate="2018-02-21T19:16:26.407" Score="2" Body="&lt;p&gt;From what I've recently read, Pantheon is able to be installed not only on top of Arch but also Fedora and OpenSUSE with a certain level of success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The one thing to keep in mind is, that in some cases, the results of installing Pantheon on top of other distros may not give an end-user experience at the same level as using elementary OS. Until a distro like Antergos (Arch based) or Gecko Linux (OpenSUSE based) create an official or community spin, I personally, would stay away. Finding support within a user forum of a distro that does not officially support Pantheon or support it via a community release may prove to be difficult when the time to troubleshoot issues arrives. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're thinking of moving forward, doing an internet search using 'Pantheon Desktop Environment' plus the distro of your choice will get you moving in the right direction.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck!!!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastEditorUserId="13440" LastEditDate="2018-04-23T21:20:42.367" LastActivityDate="2018-04-23T21:20:42.367" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14865" PostTypeId="1" CreationDate="2018-02-21T22:30:24.443" Score="0" ViewCount="845" Body="&lt;p&gt;I've installed the Elementary OS onto my old MacBook Air. I can't get the laptop to recognize and connect to my wifi though. Any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pix... 934 shows that I don't have a regular LAN connection. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pix...754 shows that none of my Wi-Fi connections are showing up. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pix... 624 is the new screen that shows up when I select one of my WiFi connections. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pix... 604 shows all the available Wi-Fi connections. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pix... 414 shows the screen when I turn the computer on and press &amp;amp; hold the 'Options' button after the computer makes the little music sound.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MLeMI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MLeMI.jpg&quot; alt=&quot;Pix... 934 shows that I don&amp;#39;t have a regular LAN connection.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/utPWi.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/utPWi.jpg&quot; alt=&quot;Pix...754 shows that none of my Wi-Fi connections are showing up.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[&lt;img src=&quot;https://i.stack.imgur.com/HgO9l.jpg&quot; alt=&quot;Pix... 624 is the new screen that shows up when I select one of my WiFi connections. [3]&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B9OQX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B9OQX.jpg&quot; alt=&quot;Pix... 604 shows all the available Wi-Fi connections. &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WiHNA.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WiHNA.jpg&quot; alt=&quot;Pix... 414 shows the screen when I turn the computer on and press &amp;amp; hold the &amp;#39;Options&amp;#39; button after the computer makes the little music sound.&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read something somewhere about needing to activate the network or something. Any thoughts? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was hopeful when I saw this 'Options' screen with my WiFi connections. So I tried all of them and still nothing. I think I'm missing something real simple here. Humm... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate all &amp;amp; any help. Dan&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Okay, so I got into the GRUB menu by pressing the 'esc' key within the press hold the 'option' key after you hear the Macbook chime at startup. Here are the lists of items to choose from after typing 'help' at the GRUB menu screen came up. Any suggestions?&lt;a href=&quot;https://i.stack.imgur.com/7E2FF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7E2FF.jpg&quot; alt=&quot;GRUB menu list 1&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/CyQiH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CyQiH.jpg&quot; alt=&quot;GRUB menu list 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13786" LastEditorUserId="13786" LastEditDate="2018-02-22T14:31:43.773" LastActivityDate="2024-01-11T03:08:25.947" Title="Can't connect to internet with my old MacBook Air running Elementary OS" Tags="|wifi|bluetooth|macbook|internet|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 3.0" />
  <row Id="14868" PostTypeId="1" CreationDate="2018-02-22T07:08:02.277" Score="0" ViewCount="761" Body="&lt;p&gt;I'm running Elementary os 0.4.1 loki. After doing some magic with apt-get I managed to broke it so some packages won't install. Then I tried to fix it with some solutions I found on Google like &lt;code&gt;apt-get clean &amp;amp;&amp;amp; apt-get autoremove&lt;/code&gt;, &lt;code&gt;apt-get install --fix-missing&lt;/code&gt;, &lt;code&gt;dpkg --configure -a&lt;/code&gt;, etc.. Now almost every package says 'unmet dependencies'&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; wine : Depends: wine1.6 but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; pinta : Depends: libcairo2 (&amp;gt;= 1.14.0) but it is not going to be installed&#xA;         Depends: libglib2.0-cil (&amp;gt;= 2.12.10-1ubuntu1) but it is not going to be installed&#xA;         Depends: libgtk2.0-cil (&amp;gt;= 2.12.10-1ubuntu1) but it is not going to be installed&#xA;         Depends: libmono-addins-gui0.2-cil (&amp;gt;= 1.0) but it is not going to be installed&#xA;         Depends: libmono-addins0.2-cil (&amp;gt;= 1.0) but it is not going to be installed&#xA;         Depends: libmono-cairo4.0-cil (&amp;gt;= 4.0.4.1) but it is not going to be installed&#xA;         Depends: gnome-icon-theme but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;apt-get&lt;/code&gt; update gives me this error at the end:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:20 http://ppa.launchpad.net/n-muench/programs-ppa/ubuntu xenial Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done                       &#xA;E: The repository 'http://ppa.launchpad.net/n-muench/programs-ppa/ubuntu xenial Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And some programs won't start now&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gimp&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How do I fix it? Should I just reinstall the system?&lt;/p&gt;&#xA;" OwnerUserId="13812" LastEditorUserId="13812" LastEditDate="2018-02-22T07:57:31.003" LastActivityDate="2019-04-30T18:27:48.837" Title="apt-get: Unmet dependencies for almost every package" Tags="|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14869" PostTypeId="2" ParentId="14868" CreationDate="2018-02-22T08:15:26.267" Score="2" Body="&lt;p&gt;The &quot;... does not have a Release file&quot; part is quite common, looks like you have a ppa enabled / added that doesn't support Ubuntu Xenial, where elementary OS is build on. Please try to be careful when adding third party ppa's. Please try using newer packaging solutions like Snaps, Flatpacks or AppImages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking at it's url &lt;code&gt;http://ppa.launchpad.net/n-muench/programs-ppa/ubuntu&lt;/code&gt; this is the ppa: &lt;code&gt;ppa:n-muench/programs-ppa&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can still install applications I would recommend using &lt;code&gt;ppa-purge&lt;/code&gt;, to remove the ppa. It does extra things, like also uninstalling and downgrading packages coming from a ppa. (It will tell you what it will do, before yo confirm that's what you want)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ppa-purge&#xA;sudo ppa-purge ppa:n-muench/programs-ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you can't install that package I would remove the ppa like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I know, an add command, with a remove argument, it's bad, but works.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-04-30T18:27:48.837" LastActivityDate="2019-04-30T18:27:48.837" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="14870" PostTypeId="2" ParentId="14865" CreationDate="2018-02-22T09:45:53.860" Score="0" Body="&lt;p&gt;Hello try to open directly in the boot process with the esc button Grub. A menu appears to confirm extended processes for eOS and start with the Rev. item. In the menu a sub-item Activate network appears. Run Rev. completely and restart and your network should be activated&lt;/p&gt;&#xA;" OwnerUserId="13814" LastEditorUserId="3018" LastEditDate="2018-03-11T10:10:05.347" LastActivityDate="2018-03-11T10:10:05.347" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14872" PostTypeId="1" CreationDate="2018-02-22T14:19:22.993" Score="0" ViewCount="1212" Body="&lt;p&gt;I'm trying to get this (XP-PEN Star 06) tablet to work. I tried DiGiMend on github and installing their drivers etc... did not work. Here is my complete output for the tablet. &lt;a href=&quot;https://pastebin.ubuntu.com/p/d5DFQ8V3ZG/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.ubuntu.com/p/d5DFQ8V3ZG/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2019-05-07T20:03:00.743" Title="Does anyone know how to get an XP-Pen Star 06 tablet working on Ubuntu/elementaryOS or Linux?" Tags="|drivers|tablet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14873" PostTypeId="1" CreationDate="2018-02-22T14:47:21.733" Score="0" ViewCount="881" Body="&lt;p&gt;I want to run Arduino IDE as root, because if I run it normally (as a normal user), it won't allow me to upload the code to the Arduino. For now I have circumvented this issue by creating a symlink to the arduino file in my installation directory (for me it is /opt/arduino-1.8.5/arduino) and running it as sudo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to be able to run it from the application menu, so I used a program called AppEditor (from the AppCentre)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PsrEU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PsrEU.png&quot; alt=&quot;Before&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I add &quot;sudo&quot; before the &quot;/opt/arduino-1.8.5/arduino&quot; as listed below, the program will not even run. Am I writing the syntax wrong?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/UtKmL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UtKmL.png&quot; alt=&quot;After&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user13817" LastActivityDate="2018-02-22T16:35:20.120" Title="Running apps as root (using AppEditor)" Tags="|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14874" PostTypeId="1" CreationDate="2018-02-22T16:04:09.067" Score="1" ViewCount="57" Body="&lt;p&gt;I have a problem with my Loki. Yesterday everything was fine, but after rebooting it up due to system updates, I noticed that everything stopped working. I mean things like, wifi, bluetooth, card reader, fn+volume up/down, fn+screen brightens etc. It's as if the system lost the drivers for everything, or it doesn't detect anything. Any helpful tips? I'm running latest Loki on a HP Elitebook 8460p.&lt;/p&gt;&#xA;" OwnerUserId="13818" LastEditorUserId="84" LastEditDate="2018-02-23T09:19:40.240" LastActivityDate="2018-11-22T03:03:00.530" Title="All devices stopped working" Tags="|drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14875" PostTypeId="2" ParentId="14873" CreationDate="2018-02-22T16:35:20.120" Score="3" Body="&lt;p&gt;&lt;code&gt;sudo&lt;/code&gt; is a command-line tool, you need to use &lt;code&gt;gksudo&lt;/code&gt; instead in this case as this will pop up a dialogue asking for the password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this is probably not what you really want to do as it means the entire IDE is running as root which would be a security issue. What you should do is figure out what needs privileges and add your user to the correct group to enable access.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, wireshark/tshark need users should be added to the &lt;code&gt;wireshark&lt;/code&gt; group rather than run as root. Similarly, users who need access to the serial ports should be part of the &lt;code&gt;dialout&lt;/code&gt; group (maybe this is what you need).&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2018-02-22T16:35:20.120" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14876" PostTypeId="2" ParentId="871" CreationDate="2018-02-22T18:57:44.983" Score="1" Body="&lt;p&gt;&lt;code&gt;pantheon-terminal&lt;/code&gt; supports its process completion notifications for &lt;code&gt;fish&lt;/code&gt;! To enable them, you need to put the following line either in /etc/fish/config.fish to enable them for the entire system or in ~/.config/fish/config.fish to enable them just for your user:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;source /usr/share/pantheon-terminal/enable-fish-completion-notifications 2&amp;gt;/dev/null; or true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="347" LastActivityDate="2018-02-22T18:57:44.983" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14881" PostTypeId="2" ParentId="10981" CreationDate="2018-02-23T08:27:37.157" Score="4" Body="&lt;p&gt;Snaps don't always work with the system stylesheet. An easy alternative is to use Flatpak apps from Flathub when apps exist in both places, because Flatpak has a mechanism to work with the elementary stylesheet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install an app from Flathub:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Visit the app's page on &lt;a href=&quot;https://flathub.org/apps&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the &lt;strong&gt;Install&lt;/strong&gt; button on the web page&lt;/li&gt;&#xA;&lt;li&gt;Depending on your browser, Sideload may open automatically. If not, choose to open the downloaded file with &lt;strong&gt;Sideload&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Read and agree to the implications of installing an untrusted app from Flatpak.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If this is the first Flatpak app you've installed, it might not show up in the Applications Menu until you log out and back in—future Flatpak apps will show up instantly. You can then uninstall the snap version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's typically recommended to use Flatpak apps on elementary OS instead of snap because elementary has &lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;officially backed Flatpak&lt;/a&gt;, elementary OS supports Flatpak out of the box, and elementary developers have put &lt;a href=&quot;https://blog.elementary.io/updates-for-october-2019/&quot; rel=&quot;nofollow noreferrer&quot;&gt;significant work into&lt;/a&gt; making sure it's easy to install and update Flatpak apps without having to use a Terminal.&lt;/p&gt;&#xA;" OwnerUserId="6194" LastEditorUserId="308" LastEditDate="2019-12-19T20:14:34.460" LastActivityDate="2019-12-19T20:14:34.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14882" PostTypeId="2" ParentId="13971" CreationDate="2018-02-23T09:43:42.113" Score="5" Body="&lt;p&gt;Hopefully this will fix it overtime with version 59 of Firefox.&#xA;&lt;a href=&quot;https://www.omgubuntu.co.uk/2017/11/firefox-nightly-adds-csd-option&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.omgubuntu.co.uk/2017/11/firefox-nightly-adds-csd-option&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; In the latest update of Firefox (Quantum 60.0), this is now working! Just do this&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Menu&lt;/li&gt;&#xA;&lt;li&gt;Customize&lt;/li&gt;&#xA;&lt;li&gt;Untick &lt;em&gt;Title Bar&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13020" LastEditorUserId="13020" LastEditDate="2018-05-11T12:38:11.673" LastActivityDate="2018-05-11T12:38:11.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14883" PostTypeId="2" ParentId="13971" CreationDate="2018-02-23T10:23:34.200" Score="2" Body="&lt;p&gt;The people behind Firefox seem to be working hard on client-side decoration, which will enable this feature without any extensions. Almost every day people are working out smaller and smaller issues. You could follow the following bug to keep up to date:&lt;br&gt;&#xA;&lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1283299&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.mozilla.org/show_bug.cgi?id=1283299&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current nightly (60.0a1 (2018-02-21)):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ns0OG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ns0OG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-23T10:23:34.200" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14884" PostTypeId="1" CreationDate="2018-02-23T11:06:59.743" Score="2" ViewCount="531" Body="&lt;p&gt;Sometimes I have accidentally deleted files or folder (using &lt;kbd&gt;shift&lt;/kbd&gt;+&lt;kbd&gt;del&lt;/kbd&gt;) without realizing that they were selected while I was deleting another file. Is it possible to disable that check box in the upper left of the file or folder's icon?&lt;/p&gt;&#xA;" OwnerUserId="13827" LastEditorUserId="16827" LastEditDate="2019-02-06T13:28:24.293" LastActivityDate="2024-01-21T18:07:00.870" Title="Disable the check box in the file manager?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="14886" PostTypeId="2" ParentId="9801" CreationDate="2018-02-23T15:28:23.993" Score="3" Body="&lt;p&gt;Create a .desktop file containing the following&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=&#xA;Exec=&#xA;Terminal=false&#xA;Hidden=true&#xA;Type=Application&#xA;Icon=/path-to-icon/icon.svg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where &lt;code&gt;/path-to-icon/icon.svg&lt;/code&gt; is the icon you want to use for your separator. Then add it to the dock.&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2018-02-23T15:28:23.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14889" PostTypeId="1" CreationDate="2018-02-23T20:11:56.343" Score="1" ViewCount="588" Body="&lt;p&gt;So last week I had replaced my OS with elementary OS, no duel booting, no partitions, just full on replaced Windows with elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That would be it, except that i'm having some issues running and even installing some pieces of software, so I wanted to switch out from elementary OS to Ubuntu, however whenever use my USB Drive or DVD it won't load straight from them like it used to with Windows, it just jumps straight into elementary OS, I can't find anything about this issue anywhere and I don't know how to resolve the issue, does anyone know what I can do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way data loss isn't an issue, there's nothing on here I either can't get back easily or isn't backed up on a cloud.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially what i'm asking is how to do a fresh install from elementary OS to Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="13832" LastEditorUserId="16827" LastEditDate="2019-04-13T13:23:30.737" LastActivityDate="2019-04-13T13:23:30.737" Title="Switch from elementary OS to Ubuntu" Tags="|boot|ubuntu|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="14890" PostTypeId="1" AcceptedAnswerId="14892" CreationDate="2018-02-23T20:27:01.033" Score="2" ViewCount="5196" Body="&lt;p&gt;I'm trying to fix this issue when running &lt;code&gt;sudo apt update&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'https://download.docker.com/linux/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried adding the correct repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository    &quot;deb [arch=amd64] https://download.docker.com/linux/ubuntu \&#xA;   xenial \&#xA;   stable&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also tried searching for the &quot;loki&quot; keyword and replace to &quot;xenial&quot;, no luck:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lucaswxp@imhuman:/etc/apt/sources.list.d$ cat * | grep &quot;loki&quot;&#xA;&amp;gt; empty result&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any idea how to get apt update to work again?&lt;/p&gt;&#xA;" OwnerUserId="13833" LastActivityDate="2018-02-24T04:07:04.003" Title="apt update &quot;does not have a Release file&quot;" Tags="|apt|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14891" PostTypeId="2" ParentId="14889" CreationDate="2018-02-23T23:10:55.103" Score="2" Body="&lt;p&gt;If I'm understanding the question and comments correctly, it sounds like the machine is booting straight into elementary OS because of the boot order dictated by the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending upon the make of the machine, you can reach the Boot Manager/Menu by pressing an Fn key during the start-up process. The key that you use to access the Boot Menu will depend upon the make of your machine which if you do an internet search including the words &quot;boot menu&quot; followed by the make of your machine, you should find it. For instance, on my HP machine, F9 gets me to the Boot Menu while F10 gets me to the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you figure out what key you need to be pressing during the start-up process, with the machine powered off, plug in your USB drive that has Ubuntu, press the power button then hit the appropriate key to get to the Boot Menu. You can then select the device you want to boot from such as the USB drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This information can be found in the section &quot;Booting from the Install Drive&quot; found in the elementary OS install instructions. These instructions would also be applicable to Ubuntu and can be found &lt;a href=&quot;https://elementary.io/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now that we have that out of the way, what issues are you having installing software on elementary OS? Is there something we can do to help within that area that would maybe prevent you from needing to do a switch to Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-02-23T23:10:55.103" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14892" PostTypeId="2" ParentId="14890" CreationDate="2018-02-24T04:07:04.003" Score="3" Body="&lt;p&gt;So, I was looking in the wrong path. The file I needed to edit was &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;. I just replaced loki to xenial and it worked.&lt;/p&gt;&#xA;" OwnerUserId="13833" LastActivityDate="2018-02-24T04:07:04.003" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14894" PostTypeId="1" CreationDate="2018-02-24T10:39:08.253" Score="1" ViewCount="305" Body="&lt;p&gt;As mentioned in the title, sometimes using alt-tab gets stuck in the screen mode when only open apps are shown in the dock. This is very problematic for me as when stuck no operations can be done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not even able to take a screenshot of this bug and I don't know any other way to help you understand the bug (if there is a way, using some logs, etc please let me know) so, I made a video of this from my phone. Apologies but it was my only option as I could see.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will be linking the video here when it's uploaded: &lt;a href=&quot;https://photos.app.goo.gl/YDMCYRZO5LP2hdDx2&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://photos.app.goo.gl/YDMCYRZO5LP2hdDx2&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The one workaround I have figured out is to press &lt;code&gt;alt + shift&lt;/code&gt; combination. But I was curious as to why this even happens and if at all, it can be corrected.&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2019-08-26T08:03:35.493" Title="Using alt tab gets stuck sometimes" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ClosedDate="2019-08-26T16:07:33.507" ContentLicense="CC BY-SA 3.0" />
  <row Id="14895" PostTypeId="2" ParentId="14512" CreationDate="2018-02-24T11:32:42.447" Score="0" Body="&lt;p&gt;I believe this already exists?&lt;br&gt;&#xA;&lt;a href=&quot;https://hub.docker.com/r/elementary/docker/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hub.docker.com/r/elementary/docker/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-24T11:32:42.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14896" PostTypeId="2" ParentId="9912" CreationDate="2018-02-24T11:36:26.217" Score="1" Body="&lt;p&gt;I was able to have elementary OS auto switch to my bluetooth headphones by loading a extra module:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add the following line to: &lt;code&gt;/etc/pulse/default.pa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;load-module module-switch-on-connect&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sources:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://sandalov.org/blog/2146/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://sandalov.org/blog/2146/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/8409/autoconnecting-bluetooth-devices&quot;&gt;https://askubuntu.com/questions/8409/autoconnecting-bluetooth-devices&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Maybe there is a similar trick for regular headphones? &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-24T11:36:26.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14901" PostTypeId="1" CreationDate="2018-02-25T04:38:38.393" Score="0" ViewCount="1302" Body="&lt;p&gt;What made the developer's team to decide not to have a screensaver option on the elementary OS settings?&lt;/p&gt;&#xA;" OwnerUserId="11909" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:40.057" LastActivityDate="2020-03-29T02:48:58.473" Title="Why doesn't elementary OS include screensaver by default?" Tags="|development|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="14902" PostTypeId="2" ParentId="11131" CreationDate="2018-02-25T07:29:33.087" Score="1" Body="&lt;p&gt;I'm running an RX 580 in my machine, and I would only consider the AMDGPU-PRO drivers acceptable and functional with a newer kernel. I've only tested 4.15.x, but it's the one variable that put forth positive results.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-02-25T07:29:33.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14903" PostTypeId="1" AcceptedAnswerId="14905" CreationDate="2018-02-25T09:43:47.440" Score="0" ViewCount="1618" Body="&lt;p&gt;To log in to the server of a client of mine, I need to make a VPN connection. On Ubuntu I managed to do this quite easily following the steps as described here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/31100/how-do-i-install-the-cisco-vpn-client&quot;&gt;https://askubuntu.com/questions/31100/how-do-i-install-the-cisco-vpn-client&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, in elementary I can't seem to find the screen with corresponding to this one:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uy3C2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uy3C2.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 4 credentials:&#xA;- gateway&#xA;- user name&#xA;- user password&#xA;- shared secret (group password)&#xA;- group name&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On elementary OS, I only have options with certificates. How can I enable those other connection options? I can select the Cisco option:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cA5HW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cA5HW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But then my options are limited:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/v8NWT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v8NWT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2019-12-19T00:02:15.313" Title="Add Cisco VPN with login credentials an group name" Tags="|networking|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14904" PostTypeId="2" ParentId="13186" CreationDate="2018-02-25T10:34:56.977" Score="1" Body="&lt;p&gt;If you use https connection you need to add your certificate to trusted authorities on your computer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo -n | openssl s_client -connect mycalendarurl.com:2080     | sed -ne '/-BEGIN CERTIFICATE-/,/-END CERTIFICATE-/p' &amp;gt; /tmp/mycalendarurl.crt&#xA;cd /tmp&#xA;sudo cp mycalendarurl.crt /usr/local/share/ca-certificates/mycalendarurl.crt&#xA;sudo update-ca-certificates&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then create your caldav calendar with the caldav link from your server.&#xA;After establishing connection, the calendar application will prompt for a password.&lt;/p&gt;&#xA;" OwnerUserId="13831" LastActivityDate="2018-02-25T10:34:56.977" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14905" PostTypeId="2" ParentId="14903" CreationDate="2018-02-25T10:56:31.453" Score="1" Body="&lt;p&gt;I have a account with NordVPN, they have linux users download ovpn files, which you can import.&lt;br&gt;&#xA;See: &lt;a href=&quot;https://nordvpn.com/tutorials/linux/openvpn/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://nordvpn.com/tutorials/linux/openvpn/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does Cisco VPN provide something like that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What weird is that I have less options in the &quot;Choose a VPN Connection Type&quot; dialog, I can only choose:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;OpenVPN&lt;/li&gt;&#xA;&lt;li&gt;Point-to-Point Tunneling Protocol (PPTP)&lt;/li&gt;&#xA;&lt;li&gt;Import a saved VPN configuration&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-02-25T10:56:31.453" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14907" PostTypeId="2" ParentId="14025" CreationDate="2018-02-25T16:58:57.233" Score="0" Body="&lt;p&gt;I had the same problem, and &lt;a href=&quot;https://elementaryos.stackexchange.com/a/5313/13847&quot;&gt;this anwser&lt;/a&gt; worked for me:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Run &lt;code&gt;ibus-daemon -drx&lt;/code&gt; in terminal.&lt;br&gt;&#xA;  If you want IBus to automatically start with the system,&#xA;  then go to &lt;strong&gt;Settings &gt; Applications &gt; Startup&lt;/strong&gt;&#xA;  and add &lt;code&gt;ibus-daemon -drx&lt;/code&gt; as a custom command.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="13847" LastEditorUserId="84" LastEditDate="2018-02-26T02:08:32.520" LastActivityDate="2018-02-26T02:08:32.520" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14908" PostTypeId="2" ParentId="13948" CreationDate="2018-02-25T17:07:31.477" Score="0" Body="&lt;p&gt;No, it isn't. Try command below or follow this &lt;a href=&quot;https://elementaryos.stackexchange.com/a/5313/13847&quot;&gt;instruction&lt;/a&gt;.&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Run &lt;code&gt;ibus-daemon -drx&lt;/code&gt; in terminal.&lt;br&gt; &#xA;  If you want IBus to automatically start with the system, then go to &lt;strong&gt;Settings &gt;&#xA;  Applications &gt; Startup&lt;/strong&gt; and add &lt;code&gt;ibus-daemon -drx&lt;/code&gt; as a custom&#xA;  command.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="13847" LastActivityDate="2018-02-25T17:07:31.477" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14909" PostTypeId="2" ParentId="12677" CreationDate="2018-02-25T17:10:47.723" Score="-1" Body="&lt;p&gt;Run &lt;code&gt;ibus-daemon -drx&lt;/code&gt; in terminal.&lt;/p&gt;&#xA;" OwnerUserId="13847" LastActivityDate="2018-02-25T17:10:47.723" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14910" PostTypeId="1" CreationDate="2018-02-25T19:10:57.613" Score="1" ViewCount="196" Body="&lt;p&gt;As the title says, the random screenshots are placed in the Pictures folder, and not in Pictures/Screenshots/ where the screenshots I take are saved.&#xA;Checked the internet before posting this, couldn't find much. And no, the print screen button on the keyboard is not stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on elementary os Loki 0.4.1, latest version, freshly installed a few days ago on a clean hdd. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the issue here?&lt;/p&gt;&#xA;" OwnerUserId="13849" LastEditorUserId="84" LastEditDate="2018-03-11T10:00:18.543" LastActivityDate="2018-03-11T10:00:18.543" Title="I keep finding random screenshots in the Pictures folder" Tags="|screenshot|folder|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="14912" PostTypeId="2" ParentId="14901" CreationDate="2018-02-26T08:43:57.063" Score="4" Body="&lt;p&gt;Not being one of the devs I can't really answer for them, but I suspect the reason is that screensavers are somewhat obsolete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unless you have a really old CRT display it is far better to allow the power saver to kick in instead. That saves the screen better than any screensaver and it saves energy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is nothing stopping you from apt installing the screensavers if you really want them though.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2018-02-26T08:43:57.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14913" PostTypeId="2" ParentId="11105" CreationDate="2018-02-26T09:57:08.603" Score="1" Body="&lt;p&gt;For anyone else having this problem, I didn't know why elementary almost seemed frozen, but eventually realized I had an error message hidden behind the installation screen.&lt;/p&gt;&#xA;" OwnerUserId="13851" LastActivityDate="2018-02-26T09:57:08.603" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14918" PostTypeId="1" AcceptedAnswerId="15668" CreationDate="2018-02-26T23:43:00.587" Score="0" ViewCount="134" Body="&lt;p&gt;I have been experiencing constant glitch from any stream source available, even from netflix and youtube.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically it looks like there are parts of two frames at same time on the screen. I see 90% of a frame and a square or rectangle of other frame overlapping it. It happens all the time sometimes it looks likes the frame still rendering when the next one is already been showed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon also looks weird with its animations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried out Linux Mint and it has the same symptom, but I have also tried Manjaro, which has no issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried using the drivers that comes with the distro and also tried install the suggested NVIDIA drivers.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Dual-Core Intel® Core™ i7-4510U CPU @ 2.00GHz&#xA;Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)&#xA;NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] (rev a1)&#xA;8,1 GB memory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6954" LastActivityDate="2018-06-01T12:26:53.660" Title="Glitches on streamed videos" Tags="|nvidia|videos|bumblebee|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14919" PostTypeId="1" CreationDate="2018-02-27T00:46:48.683" Score="0" ViewCount="94" Body="&lt;p&gt;I installed Elementary OS with the newest version and something is wrong with it. I can't suspend my computer and I dont know why.. I can only suspend it if I open a terminal with CTRL+ALT+F1 and login. If I do this, it works. Otherwise it wont..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know's what's happening?&lt;/p&gt;&#xA;" OwnerUserId="13862" LastActivityDate="2024-03-28T08:07:16.080" Title="My PC only suspends and hibernate when I enter a terminal" Tags="|system-installation|system|suspend|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14920" PostTypeId="2" ParentId="14919" CreationDate="2018-02-27T07:01:55.597" Score="0" Body="&lt;p&gt;This might be related to subtle mouse movement waking up your machine when suspending from a desktop. See &lt;a href=&quot;http://www.das-werkstatt.com/forum/werkstatt/viewtopic.php?f=7&amp;amp;t=1985&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for instructions on how to prevent this from happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't help, some more info would be helpful:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How are you suspending? By the closing the laptop lid or via a menu or command?&lt;/li&gt;&#xA;&lt;li&gt;What do you mean when you say suspending &quot;doesn't work&quot;? Does it suspend and immediately wake up again? Does nothing happen? Do you get an error?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="13342" LastActivityDate="2018-02-27T07:01:55.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14925" PostTypeId="1" CreationDate="2018-02-27T11:17:36.720" Score="1" ViewCount="75" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rqvYF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rqvYF.jpg&quot; alt=&quot;The image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;first see the picture above please,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't read any articles and text and words while i install android studio ....i use ubuntu 32 bit&lt;/p&gt;&#xA;" OwnerUserId="13866" LastActivityDate="2018-02-27T14:04:04.560" Title="whats my android studio's problem?" Tags="|android-studio|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="14926" PostTypeId="2" ParentId="14925" CreationDate="2018-02-27T14:04:04.560" Score="2" Body="&lt;p&gt;Give this a try. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work I'd recommend switching back to the default elementary fonts.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-02-27T14:04:04.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14927" PostTypeId="1" AcceptedAnswerId="14928" CreationDate="2018-02-27T15:15:57.803" Score="2" ViewCount="73" Body="&lt;p&gt;I am planning to deep dive into vala language by reading the code that was/is developed by other developers as all the apps created for elementary os are openly coded on GitHub. But, I am Vala newbie.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, let's say I clone, &lt;a href=&quot;https://github.com/Philip-Scott/Notes-up&quot; rel=&quot;nofollow noreferrer&quot;&gt;Notes-Up&lt;/a&gt;. Now my question is -&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;After change, how can I see the output of changed code? Do I have to build each time?&lt;/li&gt;&#xA;&lt;li&gt;Let's say after 50 changes I am satisfies now with modified code? How can I install that app so it always give me updated ( with 50 changes ) version of app?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks in Advanced!&lt;/p&gt;&#xA;" OwnerUserId="12903" LastActivityDate="2018-02-27T16:56:08.337" Title="Customizing existing Vala app" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14928" PostTypeId="2" ParentId="14927" CreationDate="2018-02-27T16:56:08.337" Score="3" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;After change, how can I see the output of changed code? Do I have to build each time?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Yes, that's how compiled languages work. Note, however, that the build system will skip a lot of work it doesn't have to do; only generated C code that changes between compilations needs to be recompiled. Also, you can parallelize the build by running &lt;code&gt;make -j&lt;/code&gt; instead of &lt;code&gt;make&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Practically speaking, compile times for a small program like that are very quick. It depends on your CPU, but we're talking maybe a couple of seconds for an incremental build.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Let's say after 50 changes I am satisfies now with modified code? How can I install that app so it always give me updated ( with 50 changes ) version of app?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you've passed the right options to CMake, you can just &lt;code&gt;sudo make install&lt;/code&gt; to install system-wide. However, most experienced developers I know prefer to stick to the packaged versions for their system wide install when possible. &lt;a href=&quot;https://developer.gnome.org/jhbuild/&quot; rel=&quot;nofollow noreferrer&quot;&gt;jhbuild&lt;/a&gt; makes for a great development environment if you have multiple bleeding-edge components which need to work together.&lt;/p&gt;&#xA;" OwnerUserId="3189" LastActivityDate="2018-02-27T16:56:08.337" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14929" PostTypeId="1" AcceptedAnswerId="15034" CreationDate="2018-02-27T18:28:28.130" Score="1" ViewCount="78" Body="&lt;p&gt;My Add Startup App menu is broken. I can still type and use the keyboard to select, but I can't see any of the results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YkrhJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YkrhJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: &#xA;Looks like the app Franz may be the culprit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FOtwF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FOtwF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13802" LastEditorUserId="13802" LastEditDate="2018-02-27T20:04:54.713" LastActivityDate="2018-03-06T18:55:13.183" Title="Add Startup App menu broken" Tags="|gtk|user-interface|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14932" PostTypeId="1" CreationDate="2018-02-27T21:05:54.893" Score="1" ViewCount="45" Body="&lt;p&gt;Just installed Loki, coming from Ubuntu Gnome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed emacs-nox:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;sudo apt install emacs-nox&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As expected &lt;code&gt;emacs&lt;/code&gt; opens my editor, but when I edit a file I often immediatley enter &lt;code&gt;meta-shift-?&lt;/code&gt; (&lt;code&gt;meta-shift-/&lt;/code&gt;) to go to the end of the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Shift isn't registering for some reason. What am I missing? I don't want to search for a tag, I want to go to the end of the file.&lt;/p&gt;&#xA;" OwnerUserId="13868" LastActivityDate="2018-02-27T21:05:54.893" Title="Emacs Nox End of File" Tags="|pantheon-terminal|command-line|editor|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14937" PostTypeId="2" ParentId="9" CreationDate="2018-02-28T03:59:28.517" Score="9" Body="&lt;p&gt;Although this question is quite old, there is a more acceptable answer for the OP's question now. Appcenter has an application called Desktop folder now, which you can install and use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/spheras/desktopfolder&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/spheras/desktopfolder&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xr4G7.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xr4G7.jpg&quot; alt=&quot;screenshot of Desktop folder app&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will allow you to put things/files/folders on your desktop in elementary OS, and is much cleaner than installing something like Nemo or Nautilus.&lt;/p&gt;&#xA;" OwnerUserId="161" LastActivityDate="2018-02-28T03:59:28.517" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14939" PostTypeId="1" CreationDate="2018-02-28T07:20:55.527" Score="0" ViewCount="314" Body="&lt;p&gt;I installed kdenlive from appcenter but it wouldn't start. so I tried starting it from the terminal, I get the below error.&#xA;I am not sure how to fix this issue. Please help.....&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ kdenlive Gtk-Message: Failed to load module&#xA;  &quot;pantheon-filechooser-module&quot; qrc:/qml/kdenliveclipmonitor.qml:1:1:&#xA;  module &quot;QtQuick.Controls&quot; is not installed&#xA;  qrc:/qml/kdenliveclipmonitor.qml:2:1: module &quot;QtQuick.Controls.Styles&quot;&#xA;  is not installed qrc:/qml/kdenliveclipmonitor.qml:1:1: module&#xA;  &quot;QtQuick.Controls&quot; is not installed&#xA;  qrc:/qml/kdenliveclipmonitor.qml:2:1: module &quot;QtQuick.Controls.Styles&quot;&#xA;  is not installed Segmentation fault (core dumped)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help.!&lt;/p&gt;&#xA;" OwnerUserId="10578" LastActivityDate="2019-04-09T08:03:00.623" Title="kdenlive video editor won't start" Tags="|videos|video-editor|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14941" PostTypeId="2" ParentId="14790" CreationDate="2018-02-28T11:38:18.487" Score="1" Body="&lt;p&gt;I already know the key because I searched on the internet and found it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use this in terminal: &lt;code&gt;sudo apt-get clean&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can use the update command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know was it good or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tamas&lt;/p&gt;&#xA;" OwnerUserId="7408" LastEditorUserId="16827" LastEditDate="2019-04-12T17:32:00.697" LastActivityDate="2019-04-12T17:32:00.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14942" PostTypeId="1" CreationDate="2018-02-28T15:45:38.100" Score="0" ViewCount="84" Body="&lt;p&gt;The following packages have unmet dependencies:&#xA; elementary-sdk : Depends: libgala-dev but it is not going to be installed&#xA;                  Depends: libgirepository1.0-dev but it is not going to be installed&#xA;                  Depends: libgranite-dev but it is not going to be installed&#xA;                  Depends: libgtk-3-dev but it is not going to be installed&#xA;                  Depends: libwingpanel-2.0-dev but it is not going to be installed&#xA;                  Depends: valac but it is not going to be installed&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2018-02-28T15:45:38.100" Title="elementary-sdk error" Tags="|applications|apps|" AnswerCount="0" CommentCount="9" ClosedDate="2019-04-25T19:25:26.753" ContentLicense="CC BY-SA 3.0" />
  <row Id="14945" PostTypeId="2" ParentId="14939" CreationDate="2018-02-28T16:17:21.727" Score="0" Body="&lt;p&gt;Try to install these Qt complements on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install qml-module-qtquick-controls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13881" LastActivityDate="2018-02-28T16:17:21.727" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14946" PostTypeId="1" CreationDate="2018-02-28T20:08:53.580" Score="1" ViewCount="174" Body="&lt;p&gt;I have an i5 laptop with integrated Intel HD graphics. Recently I had some bad performance of 3D graphics applications and upon looking at Xorg.0.log file I could see no indication of the intel video driver being loaded. I checked and the xserver-xorg-video-intel-hwe-16.04 was installed. I then tried adding a file /usr/share/X11/xorg.conf.d/20-intel.conf which loaded the driver and now I could see in the Xorg log files that the intel driver was loaded. I also realized that my user was not in the video group, which has access to /dev/dri device, so I also fixed that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was wondering if this is expected for Elementary OS, which I would have thought to already configure this by default to improve user experience. Is this a bug that should be reported? &lt;/p&gt;&#xA;" OwnerUserId="13884" LastActivityDate="2018-02-28T20:08:53.580" Title="intel video driver not enabled by default?" Tags="|intel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14951" PostTypeId="2" ParentId="11391" CreationDate="2018-03-01T08:52:27.577" Score="0" Body="&lt;p&gt;I have exactly the same issue and my solution was simply patience. Yes, we need to wait several minutes with the transfer window seemingly frozen at 0 seconds, but eventually the transfer completes (I even get a notification from Files of the successful completion of the transfer)! I believe this has to do with the format of the usb.&lt;/p&gt;&#xA;" OwnerUserId="13072" LastActivityDate="2018-03-01T08:52:27.577" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14953" PostTypeId="2" ParentId="6756" CreationDate="2018-03-01T14:40:50.563" Score="0" Body="&lt;p&gt;I also was facing the same problem and I tried all the solution I could find and still could not solve it, most I was able to reach was that all the Bluetooth devices were showing but still I was unable to connect to any of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I just today finally found something that works and is very easy to install, it is located on github &lt;a href=&quot;https://github.com/loimu/rtbth-dkms&quot; rel=&quot;nofollow noreferrer&quot;&gt;rtbth-dkms&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To Install,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:blaze/rtbth-dkms&#xA;sudo apt-get update&#xA;sudo apt-get install rtbth-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then follow the &lt;code&gt;Init&lt;/code&gt; commands below, your BlueTooth will work now, in case of any problem leave a comment,  I will be happy to help you.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usage&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Init&#xA;sudo modprobe rtbth&#xA;sudo rfkill unblock bluetooth&#xA;hcitool dev # check&#xA;&#xA;# Switch off&#xA;sudo rfkill block bluetooth&#xA;&#xA;# Switch on&#xA;sudo rfkill unblock bluetooth&#xA;&#xA;# Shutdown&#xA;sudo pkill -2 rtbt&#xA;sudo rmmod rtbth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4410" LastActivityDate="2018-03-01T14:40:50.563" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14956" PostTypeId="1" CreationDate="2018-03-01T16:16:26.177" Score="0" ViewCount="1214" Body="&lt;pre&gt;&lt;code&gt;[greeter]&#xA;#activate-numlock=true&#xA;#default-wallpaper=/usr/share/backgrounds/164.jpg&#xA;#high-contrast=false&#xA;#onscreen-keyboard=false&#xA;#screensaver-timeout=60&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I modified the panthon-greeter.config but still my lock screen wallpaper is the same and why does it say default wallpaper and doesn't differentiate between lock screen and background wallpaper. How can i keep them separate ??&#xA;I am using Loki&lt;/p&gt;&#xA;" OwnerUserId="13893" LastEditorUserId="3018" LastEditDate="2018-03-12T21:29:03.770" LastActivityDate="2024-01-05T03:06:30.740" Title="Can't change lock screen wallpaper" Tags="|greeter|wallpaper|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14957" PostTypeId="2" ParentId="14805" CreationDate="2018-03-01T16:58:37.380" Score="0" Body="&lt;p&gt;Turns out this wasn't just in the top left corner, but all four corners. After I noticed, I found out that this issue occurs due to the rounded edges Elementary OS has.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore, I was able to go into gedit and change the corners to not be rounded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.mask-corners enable false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1360/how-can-i-disable-the-rounded-display-corners-gala-plugin&quot;&gt;How can I disable the rounded display corners Gala plugin?&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="5230" LastActivityDate="2018-03-01T16:58:37.380" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14959" PostTypeId="1" CreationDate="2018-03-01T19:04:37.970" Score="0" ViewCount="67" Body="&lt;p&gt;It's a good os however runs slower than windows 10 on my low-end computer. How do I change the os back to Windows? I have a USB stick and it isn't being read on elementary (it is working properly on my laptop)thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="13898" LastActivityDate="2018-03-01T22:32:23.890" Title="Install Windows XP over elementary?" Tags="|system|" AnswerCount="1" CommentCount="0" ClosedDate="2018-04-04T17:09:40.847" ContentLicense="CC BY-SA 3.0" />
  <row Id="14961" PostTypeId="2" ParentId="14956" CreationDate="2018-03-01T21:11:17.583" Score="0" Body="&lt;p&gt;Are you sure that &quot;164.jpg&quot; is exist in /usr/share/backgrounds?&lt;/p&gt;&#xA;" OwnerUserId="3193" LastActivityDate="2018-03-01T21:11:17.583" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14963" PostTypeId="2" ParentId="14959" CreationDate="2018-03-01T22:32:23.890" Score="1" Body="&lt;p&gt;There is currently no way to do a change back/rollback to Windows XP, or any previous Operating System that you had before the install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have a Windows (XP, or any other version of Windows) installation disk, then you could use it to install Windows on your computer. As far as drivers go, I wish you good luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A better option, is that you have a backup of your previous system. (This includes the entire disk.) Then you could restore the previous system from the back up. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wish you good luck.&lt;/p&gt;&#xA;" OwnerUserId="13901" LastActivityDate="2018-03-01T22:32:23.890" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14965" PostTypeId="1" AcceptedAnswerId="14966" CreationDate="2018-03-01T22:57:27.367" Score="1" ViewCount="936" Body="&lt;p&gt;I get the following when trying to use AppCenter... &lt;a href=&quot;https://i.stack.imgur.com/QYBDY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QYBDY.png&quot; alt=&quot;AppCenter Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an alternative, I get the following from using &quot;sudo apt-get update&quot;&#xA;&lt;a href=&quot;http://dpaste.com/2NZ5H5T&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://dpaste.com/2NZ5H5T&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12521" LastActivityDate="2018-05-27T20:41:51.147" Title="AppCenter error (sudo apt-get update)" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14966" PostTypeId="2" ParentId="14965" CreationDate="2018-03-01T23:55:33.370" Score="0" Body="&lt;p&gt;was resolved, everything's back to normal :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JgLQ0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JgLQ0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12262" LastEditorUserId="12262" LastEditDate="2018-03-03T05:47:44.130" LastActivityDate="2018-03-03T05:47:44.130" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="14971" PostTypeId="2" ParentId="14894" CreationDate="2018-03-02T09:44:17.907" Score="0" Body="&lt;p&gt;as we can see in your video, you have a hundred tabs open in your browser which generates a very high usage of the performances of your pc ( RAM +CPU )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my question is: is your computer powerful enough to support so much load? because if it isn't, it would be normal that there are sometimes few stucks. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;for example me i have an old notebook ( Dual-Core CPU 2.30GHz + 4GB RAM ) and it stucks sometimes when i run atom + some browser tabs + gitter or discord...&lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-03-02T09:44:17.907" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="14972" PostTypeId="1" CreationDate="2018-03-02T09:47:10.503" Score="1" ViewCount="1142" Body="&lt;pre&gt;&lt;code&gt;Get:14 http://in.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]                                                           &#xA;Err:13 http://packages.elementary.io/appcenter xenial/main amd64 DEP-11 Metadata                                                       &#xA;  Hash Sum mismatch&#xA;Get:15 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [460 kB]                                                  &#xA;Get:16 http://packages.elementary.io/appcenter xenial/main DEP-11 64x64 Icons [223 kB] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm getting this error when I run &lt;code&gt;sudo apt update&lt;/code&gt;&#xA;I used to follow &lt;a href=&quot;https://askubuntu.com/a/41618&quot;&gt;this instruction&lt;/a&gt; usally when I get the above error. But this time its not getting fixed.&lt;/p&gt;&#xA;" OwnerUserId="9747" LastActivityDate="2024-03-17T11:04:25.507" Title="Hash sum mismatch on apt update" Tags="|updates|appcenter|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14973" PostTypeId="2" ParentId="14972" CreationDate="2018-03-02T09:53:59.257" Score="0" Body="&lt;p&gt;Fixed this by &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;sudo rm -rf /var/lib/apt/lists/*&#xA;sudo apt-get clean&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9747" LastActivityDate="2018-03-02T09:53:59.257" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14976" PostTypeId="2" ParentId="11527" CreationDate="2018-03-02T14:05:01.360" Score="0" Body="&lt;p&gt;A lot of Wifi glitches can be fixed just by updating your linux kernel.&lt;/p&gt;&#xA;" OwnerUserId="12599" LastActivityDate="2018-03-02T14:05:01.360" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14977" PostTypeId="1" AcceptedAnswerId="15087" CreationDate="2018-03-02T15:35:40.053" Score="0" ViewCount="532" Body="&lt;p&gt;When I do sudo apt-get upgrade in the terminal, I get at the end the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Errors detected during processing: apparmor&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can this error be fixed ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full terminal output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade&#xA;[sudo] password for sam:       &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA; gir1.2-json-1.0 libatkmm-1.6-1v5 libcairomm-1.0-1v5 libdbusmenu-gtk4 libglibmm-2.4-1v5 libido3-0.1-0 libllvm4.0 libpangomm-1.4-1v5 libqmi-glib1 libsigc++-2.0-0v5 libvala-0.34-0 linux-headers-4.10.0-32 linux-headers-4.10.0-32-generic linux-image-4.10.0-32-generic linux-image-extra-4.10.0-32-generic sbsigntool&#xA;Use 'sudo apt autoremove' to remove them.&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;Need to get 0 B/450 kB of archives.&#xA;After this operation, 0 B of additional disk space will be used.&#xA; Do you want to continue? [Y/n] y&#xA; dpkg: error processing package apparmor (--configure):&#xA; package is in a very bad inconsistent state; you should&#xA; reinstall it before attempting configuration&#xA;Errors were encountered while processing:&#xA; apparmor&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13912" LastEditorUserId="3018" LastEditDate="2018-03-12T20:00:08.233" LastActivityDate="2018-03-12T20:00:08.233" Title="Error sudo apt-get upgrade - apparmor" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14979" PostTypeId="1" CreationDate="2018-03-02T21:18:40.873" Score="2" ViewCount="133" Body="&lt;p&gt;I am having an issue with Pantheon Mail. It is not loading new mail from the server when I open the app. Also, I can scroll between messages in the middle panel, but it never shows me the content for any message except for the first one. The delete button depresses, but does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="13764" LastActivityDate="2018-03-06T19:16:28.810" Title="Pantheon Mail not responsive, stuck on top message" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="14980" PostTypeId="1" CreationDate="2018-03-02T22:46:07.223" Score="0" ViewCount="114" Body="&lt;p&gt;I've installed the operating system and when it gets to finalising the restart, it says reboot: restarting done. It doesn't restart and has been sat there for 20+ minutes. I try to include an image but it doesn't show.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H4qcH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/H4qcH.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13917" LastActivityDate="2024-04-02T20:07:55.970" Title="Install finished, goes to reboot and gets stuck" Tags="|release-loki|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14981" PostTypeId="2" ParentId="14980" CreationDate="2018-03-02T23:11:46.707" Score="0" Body="&lt;p&gt;I managed to get past it. I restarted, it booted into grub and I edited the boot of elementary. I added acpi=off and the OS started to function.&lt;/p&gt;&#xA;" OwnerUserId="13917" LastActivityDate="2018-03-02T23:11:46.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14985" PostTypeId="1" AcceptedAnswerId="17249" CreationDate="2018-03-03T15:27:42.107" Score="0" ViewCount="6406" Body="&lt;p&gt;I'm running Elementary Os Loki 0.4.1. I wanna connect another monitor to my laptop, but my OS doesn't recognize it. In settings it doesn't even detect that I have another monitor connected (via HDMI).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've trying shut down the system and getting it back up again, it didn't work. I'm up to date with updates and upgrades too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what else to try. If someone could help me, that'll be awesome :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;UPDATE&lt;/em&gt;&lt;/strong&gt;&#xA;I've been looking and found this:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6685/laptop-hdmi-external-monitor-issue?utm_medium=organic&amp;amp;utm_source=google_rich_qa&amp;amp;utm_campaign=google_rich_qa&quot;&gt;Laptop + HDMI external monitor issue?&lt;/a&gt;&#xA;I tried it , but I don't have the &lt;code&gt;~/.config/monitors.xml&lt;/code&gt; file. I've search everywhere, even within hidden folder, just nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my terminal I put tho command &lt;code&gt;lspci | grep VGA&lt;/code&gt; and the output was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:02.0 VGA compatible controller: Intel Corporation Skylake Integrated Graphics (rev 06)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried the command &lt;code&gt;lspci -nn | grep '\[03'&lt;/code&gt; too, and the output was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)&#xA;&#xA;01:00.0 3D controller [0302]: NVIDIA Corporation GM206M [GeForce GTX 965M] [10de:1427] (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13869" LastEditorUserId="14940" LastEditDate="2018-11-30T19:59:03.590" LastActivityDate="2019-10-02T11:02:54.253" Title="Second monitor doesn't connect" Tags="|release-loki|display|hdmi|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="14986" PostTypeId="2" ParentId="14305" CreationDate="2018-03-03T16:00:58.403" Score="0" Body="&lt;p&gt;to run executable files on linux, you have to install wine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install wine wine1.6 wine1.6-amd64&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to check that it's installed run &lt;code&gt;winecfg&lt;/code&gt; (a config windows should appear)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to run an executable file we run the command: &lt;code&gt;$ wine file.exe&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;check &lt;a href=&quot;https://wiki.winehq.org/Wine_User%27s_Guide#Using_Wine&quot; rel=&quot;nofollow noreferrer&quot;&gt;Using_Wine&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and one note: normally, a file can be launched by ./file if it has &lt;code&gt;#!/bin/bash&lt;/code&gt; for bash scripts or &lt;code&gt;#!/usr/bin/env python&lt;/code&gt; for python scripts ...&#xA;otherwise try: &lt;code&gt;$ bash file&lt;/code&gt; ... or &lt;code&gt;$ python file&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-03-03T16:00:58.403" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="14987" PostTypeId="2" ParentId="13801" CreationDate="2018-03-03T17:42:46.553" Score="0" Body="&lt;p&gt;&lt;code&gt;ps aux&lt;/code&gt;&#xA;look for pantheon mail&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;username+ 17814  0.3  3.4 2732984 137244 ?      SLl  07:15   2:26 pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;note it's PID (in my case: 17814)&#xA;after that: &lt;code&gt;kill 17814&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-03-03T17:42:46.553" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14989" PostTypeId="1" AcceptedAnswerId="14990" CreationDate="2018-03-03T19:19:02.950" Score="2" ViewCount="2452" Body="&lt;p&gt;The only way to update from Freya 0.3 to Loki 0.4 was reinstalling the whole OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the new installer coming with Juno, is one of the planned features to give existing Loki 0.4 users the chance to smoothly update to Juno 5.0?&lt;/p&gt;&#xA;" OwnerUserId="2544" LastActivityDate="2018-03-03T21:22:59.093" Title="Update from Loki to Juno VS reinstalling the OS?" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14990" PostTypeId="2" ParentId="14989" CreationDate="2018-03-03T21:22:59.093" Score="2" Body="&lt;p&gt;I think we'll be able to directly upgrade. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;as you can see in the &lt;a href=&quot;https://github.com/elementary/installer/wiki#scary-but-hopefully-accurate-chart&quot; rel=&quot;nofollow noreferrer&quot;&gt;schema&lt;/a&gt; &quot;Our OS section&quot; (previous release means Loki for example)&quot; we could do a clean install, custom, &quot;&lt;strong&gt;upgrade&quot;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u6bzu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u6bzu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;however. we're still not sure if it's the new system that will be used. &#xA;as they say in &lt;a href=&quot;https://medium.com/elementaryos/meet-the-upcoming-installer-a499341218f5&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System76 is aiming to ship the new installer as part of the Pop!_OS 18.04 release in April. For &lt;strong&gt;elementary OS, we’d love to ship it in Juno&lt;/strong&gt; (and are working toward that goal), &lt;strong&gt;but&lt;/strong&gt; we do have a backup plan to &lt;strong&gt;ship the existing installer&lt;/strong&gt; if we &lt;strong&gt;don’t feel the new one is ready yet&lt;/strong&gt;. So, When It’s Ready™ as you might expect.&lt;/p&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-03-03T21:22:59.093" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="14993" PostTypeId="2" ParentId="14718" CreationDate="2018-03-03T22:36:24.797" Score="0" Body="&lt;p&gt;This is not really an issue. A drive will slow down during the transfer process and this is due to many factors. Between caching, heat, and other operations, you'll see a fast transfer dip into an average one. (5GB is pretty considerable for a typical flash drive.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a more detailed breakdown, worded much better than I probably could. &lt;a href=&quot;https://superuser.com/a/315145&quot;&gt;https://superuser.com/a/315145&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-03-03T22:36:24.797" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15000" PostTypeId="1" AcceptedAnswerId="15002" CreationDate="2018-03-04T12:21:46.593" Score="0" ViewCount="369" Body="&lt;p&gt;To start, this OS is really great. I only have 1 rather big problem. I can not save files to my Ubuntu server. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Connecting to a smb share or sftp share is not a problem with the 'files' app. I can create files, or directory's. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem with saving files in Scratch app: 'you cannot save changes on file ...' The same problem with LibreOffice writer when saving a new file. With LibreOffice writer, existing files will not even open. &lt;/p&gt;&#xA;" OwnerUserId="13937" LastEditorUserId="13937" LastEditDate="2018-03-04T14:14:09.827" LastActivityDate="2018-03-04T14:14:09.827" Title="Windows / smb share" Tags="|networking|files|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15001" PostTypeId="1" CreationDate="2018-03-04T13:14:37.807" Score="0" ViewCount="178" Body="&lt;p&gt;This is a known problem: /boot will run out of space after some time, due to obsolete kernel images. It will only become evident when /boot is on a separate filesystem, as it is the case for encrypted systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone confirm whether this has (finally!!) been fixed in 14.04? If so, ignore the rest of this post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise. Please let us find a solution for this ridiculous design error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The general recommendation is to run a chain as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) dpkg --get-selections to get all installed packages&#xA;2.) grep out kernel images&#xA;3.) remove the current kernel from the list, based on uname -r&#xA;4.) run apt-get remove on the remaining ones&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may be OK if run semi-automatically. But I need it to run completely unattended, alongside completely unattended system upgrades. (Because I'm preparing a system for a non-tech person who has better things to do than to care about old kernel images.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In combination with an unattended system upgrade, the following could happen (I imagine):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) let the current kernel be version N&#xA;2.) a new kernel is installed, say version M&#xA;3.) the above procedure is run, but uname -r still gives version N, so version M is removed again&#xA;4.) FAIL&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One idea of mine was to sort the list of kernels lexicographically and then remove all but the, say, last 2 in the list. (And also remove the one given by uname -r from the list.) This way the latest kernels would never be removed. That is, IF lexicographical ordering puts the latest kernel last. Which, by looking at past package names, appears probably not to be the case. m(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the next idea is to write a more sophisticated kernel version parser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? Has anyone already implemented a working solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="13939" LastActivityDate="2020-04-24T09:05:45.620" Title="elementary os keep filling its dirve automatically ... any permanent solution to fix it?" Tags="|release-freya|system-installation|boot|settings|files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15002" PostTypeId="2" ParentId="15000" CreationDate="2018-03-04T13:42:13.283" Score="0" Body="&lt;p&gt;I installed gedit, which doesn't give any problems. So the problem is in LibreOffice and Scratch! Can anyone confirm?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed LibreOffcice from the appcenter. This is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Version: 5.1.6.2&#xA;Build ID: 1:5.1.6~rc2-0ubuntu1~xenial3&#xA;CPU Threads: 4; OS Version: Linux 4.13; UI Render: default; &#xA;Locale: en-US (en_US.UTF-8); Calc: group&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this I removed LibreOffice and downloaded the software from the website. Installed this and problem solved. &#xA;If someone would like to know how to install this manually, follow this videolink on youtube: &lt;a href=&quot;https://www.youtube.com/watch?v=V8XXJ5GHiJg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=V8XXJ5GHiJg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13937" LastEditorUserId="13937" LastEditDate="2018-03-04T14:13:17.203" LastActivityDate="2018-03-04T14:13:17.203" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15004" PostTypeId="1" AcceptedAnswerId="15006" CreationDate="2018-03-04T14:26:51.477" Score="1" ViewCount="1717" Body="&lt;p&gt;When I use Ubuntu on videolan.org site and click donwload VLC it simply opens apt://vlc link and I can install vlc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However elementary os does not support that kind of links. I tried to find a .deb file but can't find it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how to install vlc 3.0.1 on elementary os?&lt;/p&gt;&#xA;" OwnerUserId="287" LastActivityDate="2018-03-04T18:05:22.973" Title="How to install 3.0.1 VLC Player on elementary os?" Tags="|vlc|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15006" PostTypeId="2" ParentId="15004" CreationDate="2018-03-04T14:51:54.740" Score="1" Body="&lt;p&gt;first option: &lt;em&gt;using snap (current version: &lt;a href=&quot;https://snapcraft.io/vlc&quot; rel=&quot;nofollow noreferrer&quot;&gt;3.0.1-4-g14a4897&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;second option: &lt;em&gt;(stable version 2.2.2 last update: 32 weeks ago)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:videolan/stable-daily&#xA;sudo apt-get update&#xA;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;third option: &lt;em&gt;(beta version 4.0.0~rc1 last update 23hours ago) &lt;strong&gt;not recommended&lt;/em&gt;&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:videolan/master-daily&#xA;sudo apt-get update&#xA;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12262" LastActivityDate="2018-03-04T14:51:54.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15009" PostTypeId="2" ParentId="15004" CreationDate="2018-03-04T18:05:22.973" Score="2" Body="&lt;p&gt;I would recommend installing VLC as a snap using Snaptastic. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;a href=&quot;https://appcenter.elementary.io/com.github.bartzaalberg.snaptastic&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snaptastic&lt;/a&gt; from the AppCenter&lt;/li&gt;&#xA;&lt;li&gt;Go to: &lt;a href=&quot;https://snapcraft.io/vlc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/vlc&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click install&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Because it's snap you'll get the latest version, which auto updates and there is less change of damaging your system than when adding custom ppa's.&lt;br&gt;&#xA;I recommend using Snaptastic because it's easier, especially for people who don't like using the command line. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-03-04T18:05:22.973" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15012" PostTypeId="1" CreationDate="2018-03-04T23:56:10.667" Score="1" ViewCount="372" Body="&lt;p&gt;After my recent upgrade (&lt;code&gt;apt-get dist-upgrade &amp;amp;&amp;amp; apt-get upgrade -y&lt;/code&gt;), my wing panel disappeared after crashing and reappearing several times. Calling to the command line gives : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ERROR 14:00:40.293329] [GLib-GIO] Settings schema 'org.pantheon.desktop.slingshot' does not contain a key named 'show-category-filter'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The whole command line output being :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[INFO 14:00:25.783136] Application.vala:153: System Panel version: 2.0.4&#xA;[INFO 14:00:25.783295] Application.vala:155: Kernel version: 4.4.0-116-generic&#xA;[FATAL 14:00:28.991514] [AccountsService] act_user_get_uid: assertion 'ACT_IS_USER (user)' failed&#xA;[FATAL 14:00:29.010746] [AccountsService] act_user_get_uid: assertion 'ACT_IS_USER (user)' failed&#xA;[FATAL 14:00:29.040781] display_widget_set_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 14:00:29.041774] display_widget_set_icon_name: assertion 'self != NULL' failed&#xA;[FATAL 14:00:31.457197] [Gtk] gtk_box_pack: assertion '_gtk_widget_get_parent (child) == NULL' failed&#xA;[FATAL 14:00:31.587410] [Gtk] gtk_widget_set_no_show_all: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;[FATAL 14:00:31.587497] [Gtk] gtk_widget_set_visible: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;[WARNING 14:00:31.698957] [Gtk] Attempting to add a widget with type AyatanaCompatibilityIndicatorButton to a container of type GtkRevealer, but the widget is already inside a container of type GtkRevealer, please remove the widget from its existing container first.&#xA;[FATAL 14:00:32.067967] Manager.vala:61: Erreur lors de l'appel de StartServiceByName pour org.bluez : GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.&#xA;[19:00:33.193341 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.260197 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.329039 Warning] [DesktopFileInfo] Unable to get exec for Autre&#xA;[19:00:33.396415 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.396663 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.399868 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.404251 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.404573 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.404870 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.409705 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.411645 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.412933 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.414528 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.418021 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:33.424695 Warning] [DesktopFileInfo] Unable to create AppInfo&#xA;[19:00:38.748465 Info] Tweaks.vala:307: Activating Tweak plug&#xA;[19:00:40.266041 Warning] PlankSettings.vala:204: Le fichier de clés contient la clé « Monitor » dans le groupe « PlankDockPreferences » qui a une valeur impossible à interpréter.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any suggestions ?&lt;/p&gt;&#xA;" OwnerUserId="4121" LastEditorUserId="4121" LastEditDate="2018-03-06T19:11:26.727" LastActivityDate="2023-12-10T02:06:45.783" Title="Wingpanel crashing after upgrade" Tags="|wingpanel|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15013" PostTypeId="1" CreationDate="2018-03-05T00:25:29.717" Score="2" ViewCount="1567" Body="&lt;p&gt;I've been battling with this for a while now and I don't know how to make it work. I want to change the login background on Elementary, but ONLY that one. I already tried Nautilus and either I'm using it wrong or it doesn't work for me. It either changes my normal wallpaper and the login one, or it doesn't do anything. What else can I do? I've tried a few stuff already. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="13933" LastActivityDate="2018-12-30T22:01:45.363" Title="How to change my login background?" Tags="|release-loki|greeter|wallpaper|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15015" PostTypeId="1" AcceptedAnswerId="16164" CreationDate="2018-03-05T04:09:49.670" Score="1" ViewCount="12262" Body="&lt;p&gt;i can't find a link for drivers to recognize my action cam. i want to use it as a webcam. It does recognize the camera as a mass storage, the sd card.&lt;/p&gt;&#xA;" OwnerUserId="12826" LastActivityDate="2020-04-17T19:38:58.570" Title="i wish to use my Apeman A77 as Webcam, can't find drivers" Tags="|software-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="15016" PostTypeId="1" CreationDate="2018-03-05T10:16:16.853" Score="0" ViewCount="1259" Body="&lt;p&gt;So, I just installed Elementary OS 0.4.1 Loki from a USB drive, and I couldn't get my Ethernet connection to work after installing with proprietary drivers, neither without them. Both were clean installs without anything else installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My motherboard is an ASRock N68-GS4 FX R2.0, featuring the Giga PHY Realtek RTL8211E. I couldn't find any drivers for this specific model on the Realtek website, and no Linux drivers at all over at ASRock's website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no access to WiFi on this computer, so thats out of the question for troubleshooting (I'm writing this with Win7, I'm using dualboot).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be much apreciated.&lt;/p&gt;&#xA;" OwnerUserId="13947" LastActivityDate="2023-04-03T15:36:02.740" Title="No Ethernet on latest version" Tags="|release-loki|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15017" PostTypeId="2" ParentId="15016" CreationDate="2018-03-05T12:35:50.720" Score="1" Body="&lt;p&gt;Ok, apparently after looking for some specs on the ethernet controller, some questions about similar motherboards on hardware forums and then some questions on the Ubuntu forums, I could narrow down the issue to the &quot;forcedeth&quot; driver, attributed to the nVidia nForce part of my motherboard (I assume it is some sort of I/O controller, as it also controls onboard audio, hard drives and whatnot). [EDIT: This seems to be a problem on most, if not all, ASRock motherboards running AM3+ CPUs, so if thats your case, the following solution might work out for you.]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the solution that worked for me:&#xA;Booting into Recovery mode through GRUB.&#xA;Then on the recovery options, I had to select GRUB to change my system from &quot;read-only&quot; to &quot;read-write&quot;.&#xA;Then I went on ROOT and did the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# rmmod forcedeth&#xA;# modprobe forcedeth msi=0 msix=0&#xA;# exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And Ethernet is now working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, that only worked until I rebooted, so after a couple of hours looking into articles on my phone, I reached the following solution to make it so ethernet is working every time (also, I was having issues shutting down/restarting, those were fixed too).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Insert the following on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options forcedeth msi=0 msix=0&quot; | sudo tee /etc/modprobe.d/forcedeth_options.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Insert your password, and then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And bam, it is working.&lt;/p&gt;&#xA;" OwnerUserId="13947" LastEditorUserId="13947" LastEditDate="2018-03-05T23:08:52.630" LastActivityDate="2018-03-05T23:08:52.630" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15020" PostTypeId="1" AcceptedAnswerId="15031" CreationDate="2018-03-05T20:13:14.120" Score="0" ViewCount="582" Body="&lt;p&gt;Am I the only one having this problem or is it a bug? Facebook, or youtube, or whatever videos in Epiphany stop playing after a few seconds, freezes, that is, except for the sound that goes until the end. It doesn't happen in Firefox for the same videos. It happens for some time now, I was hoping for an update to fix it, but the problem persists.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-03-06T12:25:40.630" Title="Videos in Epiphany problem" Tags="|release-loki|epiphany|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15021" PostTypeId="1" CreationDate="2018-03-05T21:22:57.950" Score="0" ViewCount="658" Body="&lt;p&gt;I'm completely new to Linux OS and have managed to install Elementary on to a netbook, but I'm a bit lost as to how to install Libre Office. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that I do not, and will not, be using internet access on the netbook I'm using for this.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, since much of the info refers to the Downloads directory, I have transferred the latest version of LibreOffice to there, and extracted the files, which are in a DEB folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can get so far as the Terminal being pointe dto the Download directory as follows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'name@name-TOSHIBA-NB305:~Downloads/LibreOffice_6.0.2.1_Linux_x86-64_deb$&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From here I have tried 'sudo dpkg -i *.deb'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and am met with the error message as follows: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;dpkg: error processing archive *.deb (--install):&#xA; cannot access archive: No such file or directory&#xA;Errors were encountered while processing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions ? &lt;/p&gt;&#xA;" OwnerUserId="13952" LastEditorUserId="13952" LastEditDate="2018-03-05T23:15:53.777" LastActivityDate="2018-03-05T23:15:53.777" Title="SOLVED: New to Linux, Trying to install Libre Office" Tags="|libreoffice|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15022" PostTypeId="2" ParentId="15013" CreationDate="2018-03-05T22:05:56.507" Score="1" Body="&lt;p&gt;Elementary uses LightDM for login. Please refer to the LightDM arch wiki for info on the GTK+ Greeter and how to change the wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/LightDM&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/LightDM&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But basically you can run the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install lightdm-gtk-greeter-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run the app and make your changes there.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-03-05T22:05:56.507" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15023" PostTypeId="2" ParentId="15021" CreationDate="2018-03-05T22:15:37.493" Score="1" Body="&lt;p&gt;Libre office should be in the Elementary App Center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case it is not, from the terminal: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will add the repository in your package manager and update it. &#xA;and after:&#xA;sudo apt-get install libreoffice&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-03-05T22:15:37.493" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15024" PostTypeId="2" ParentId="15013" CreationDate="2018-03-05T22:39:48.073" Score="0" Body="&lt;p&gt;You can use solutions from this post: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/81/how-do-i-change-login-background-in-elementary-os-freya-or-loki?noredirect=1&amp;amp;lq=1&quot; title=&quot;Background&quot;&gt;How do I change login background in elementary OS Freya or Loki?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6792" LastEditorUserId="565" LastEditDate="2018-04-05T22:53:43.480" LastActivityDate="2018-04-05T22:53:43.480" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15025" PostTypeId="2" ParentId="15021" CreationDate="2018-03-05T23:15:11.417" Score="0" Body="&lt;p&gt;SOLVED&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't want to connect online, but ended up doing so out of desperation, and have now installed LibreOffice. &lt;/p&gt;&#xA;" OwnerUserId="13952" LastActivityDate="2018-03-05T23:15:11.417" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15028" PostTypeId="1" CreationDate="2018-03-06T08:20:49.333" Score="1" ViewCount="27" Body="&lt;p&gt;Anyone help me please :( , my Elementary OS not booting after I selecting an operating system in grub list. After click enter to boot on elementary os, I just get a blank screen with nothing in long time. Before this, I had updated the system in the software center but because my laptop became slow so I restarted and became like this cannot boot anymore. Someone help me please :( my schoolwork is not done yet &lt;/p&gt;&#xA;" OwnerUserId="13957" LastActivityDate="2018-03-06T08:20:49.333" Title="Not booting after selecting operating system in grub menu" Tags="|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15029" PostTypeId="2" ParentId="14801" CreationDate="2018-03-06T09:14:34.203" Score="0" Body="&lt;p&gt;This is very simple with eOS. All you have to do is to install &lt;code&gt;openssh-server&lt;/code&gt; and &lt;code&gt;openssh-client&lt;/code&gt;. OpenSSH stands for open source secure shell. So with OpenSSH you can even run terminals on remote machines and do cool things like the dark guys with hoods do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So just do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install openssh-server openssh-client&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;on both eOS machies. By default OpenSSH will work on port 22. If you want to tweak openssh-server configuration then the config file is at &lt;code&gt;/etc/ssh/sshd_config&lt;/code&gt; (read &lt;a href=&quot;https://help.ubuntu.com/lts/serverguide/openssh-server.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;) However for simple file sharing you can carry on with the default configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now all you need is to open Files tool of eOS and click &quot;Connect to Server...&quot; at the bottom of the left menu. Choose SSH at the &quot;Type:&quot; dropdown list, enter IP number of the remote server at &quot;Server:&quot;, enter your friend's credentials (&quot;User name:&quot; and &quot;Password:&quot;) and click &quot;Connect&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For additional reading on OpenSSH read &lt;a href=&quot;https://darrynvt.wordpress.com/2012/02/20/openssh-server-and-client-a-complete-guide-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6831" LastActivityDate="2018-03-06T09:14:34.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15030" PostTypeId="1" CreationDate="2018-03-06T10:41:14.477" Score="1" ViewCount="431" Body="&lt;p&gt;New iOS devices are using HEIF (HEIC) by default. Compared to JPG, HEIF is awesome (half the size and better quality). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: A preview from &quot;files&quot; would be perfect.&lt;/p&gt;&#xA;" OwnerUserId="13961" LastActivityDate="2018-03-06T10:41:14.477" Title="Will the JPG &quot;successor&quot; HEIF/HEIC be supported from &quot;photos&quot; or &quot;files&quot;?" Tags="|files|photos|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15031" PostTypeId="2" ParentId="15020" CreationDate="2018-03-06T12:25:40.630" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://bugs.webkit.org/show_bug.cgi?id=183085&quot; rel=&quot;nofollow noreferrer&quot;&gt;It's been noted&lt;/a&gt;, but it seems to be a problem in GStreamer, and the version of GStreamer in Loki is so old that the relevant developer is not interested in debugging it. So we seem to be out of luck.&lt;/p&gt;&#xA;" OwnerUserId="13963" LastActivityDate="2018-03-06T12:25:40.630" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15032" PostTypeId="1" CreationDate="2018-03-06T16:19:08.807" Score="0" ViewCount="124" Body="&lt;p&gt;I installed this &lt;a href=&quot;https://i.stack.imgur.com/6XhlX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pomodoro&lt;/a&gt; application from AppCenter. But I can't find the app in Slingshot(app menu) on searching. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I open this app?&lt;/p&gt;&#xA;" OwnerUserId="5831" LastActivityDate="2019-09-03T15:05:44.250" Title="Can't find pomodoro app installed using appcenter" Tags="|release-loki|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15034" PostTypeId="2" ParentId="14929" CreationDate="2018-03-06T18:55:13.183" Score="0" Body="&lt;p&gt;This will be fixed in the next release: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-applications/pull/15&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-applications/pull/15&lt;/a&gt;&#xA;I don't know whether it will be released in Loki. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-03-06T18:55:13.183" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15036" PostTypeId="2" ParentId="14796" CreationDate="2018-03-06T21:05:11.180" Score="5" Body="&lt;p&gt;I tried hard to install my HP Laserjet P1102w using HPLIP (3.17.11) but always had error on dependencies. I have running Elementary Os Loki on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This video was for great help, but not for the beginning, just for the part of HP GUI at the end: &lt;a href=&quot;https://www.youtube.com/watch?v=5UH0-mnpGJI&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=5UH0-mnpGJI&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A. In a terminal I define the password for root privilegies (&lt;strong&gt;sudo passwd root&lt;/strong&gt;), beacuse in some point you are going to need it. In my case, I set the same password that I have for my user account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;B. I use synaptic (you can install it from AppCenter)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;C. In synaptic search for HPLIP and install both &quot;HPLIP&quot; and &quot;HPLIP GUI&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;D. In the Applications menu, open HPLIP Toolbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E. Then use &quot;Set Device&quot; and follow the instructions.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rYN0A.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rYN0A.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bfCSH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bfCSH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PNIC6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PNIC6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/SlhNf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SlhNf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And that is. It works so fine to me.&lt;/p&gt;&#xA;" OwnerUserId="13807" LastEditorUserId="13807" LastEditDate="2018-03-06T23:38:07.940" LastActivityDate="2018-03-06T23:38:07.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15037" PostTypeId="2" ParentId="10664" CreationDate="2018-03-06T23:43:59.470" Score="-2" Body="&lt;p&gt;I'm afraid to say yes it is dead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Very few questions (and even less answers) in SO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No IDE that can debug vala.&#xA;(Even Gnome-Builder).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lots of IDE that drop support of it (monodevelop, valide...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to prove me wrong please post a less than 100 lines long scenario (wget, PPA, compilation...) to get a working decent IDE (*) in a popular distro (say ubuntu 17.10) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Decent IDE = syntax highlighting, code completion, OOTB working compilation chain, breakpoint and debug in vala code (I don't care about refactoring or perf tools)&lt;/p&gt;&#xA;" OwnerUserId="13972" LastActivityDate="2018-03-06T23:43:59.470" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15038" PostTypeId="1" AcceptedAnswerId="15044" CreationDate="2018-03-07T04:30:42.117" Score="0" ViewCount="237" Body="&lt;p&gt;I've paired an Apple Magic Keyboard 2 with my Dell E7470 running elementaryOS Loki and the secondary function keys don't work. Strangely, when connected over USB they work perfectly fine (though it needs a few remappings). I've re-paired several times and even manually using &lt;code&gt;bluetoothctl&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Holding down the &lt;code&gt;fn&lt;/code&gt; key makes no difference. I've also verified by running &lt;code&gt;xev&lt;/code&gt; in terminal that I can't get the special keys events to trigger, they always register as the F{number} keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm curious if there's something that I'm missing, like a driver perhaps, or could it be just incompatible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo evtest&lt;/code&gt; results on the &lt;code&gt;/dev/input/eventX&lt;/code&gt; for the keyboard over USB:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Input driver version is 1.0.1&#xA;Input device ID: bus 0x3 vendor 0x5ac product 0x267 version 0x110&#xA;Input device name: &quot;Apple Inc. Magic Keyboard&quot;&#xA;....&#xA;Event code 204 (KEY_DASHBOARD)&#xA;Event code 208 (KEY_FASTFORWARD)&#xA;Event code 224 (KEY_BRIGHTNESSDOWN)&#xA;Event code 225 (KEY_BRIGHTNESSUP)&#xA;Event code 227 (KEY_SWITCHVIDEOMODE)&#xA;Event code 228 (KEY_KBDILLUMTOGGLE)&#xA;Event code 229 (KEY_KBDILLUMDOWN)&#xA;Event code 230 (KEY_KBDILLUMUP)&#xA;Event code 240 (KEY_UNKNOWN)&#xA;Event code 464 (KEY_FN)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And the keyboard over Bluetooth with the above event codes no where to be found:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Input driver version is 1.0.1&#xA;Input device ID: bus 0x5 vendor 0x4c product 0x267 version 0x66&#xA;Input device name: &quot;Magic Keyboard&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13973" LastEditorUserId="13973" LastEditDate="2018-03-07T05:28:12.447" LastActivityDate="2018-03-07T23:07:09.297" Title="Keyboard special function keys don't work over Bluetooth" Tags="|release-loki|keyboard|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15040" PostTypeId="1" AcceptedAnswerId="15046" CreationDate="2018-03-07T14:37:02.390" Score="0" ViewCount="600" Body="&lt;p&gt;Default elementary video player (as well as for example Cinema Player) stopped playing videos. Ths sound works, but there is no video (its black). Doesn't matter which type of video I play.&#xA;Only mpv plays both video and it's sound.&#xA;What went wrong in my system?&#xA;Where to start some troubleshooting?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inxi -Fxz&#xA;System:    Host: iBiedak Kernel: 4.13.0-36-generic x86_64 (64 bit gcc: 5.4.0) Desktop: Gnome  (Gtk 3.18.9)&#xA;           Distro: elementary 0.4.1 loki&#xA;Machine:   System: LENOVO product: C460 v: Lenovo Product&#xA;           Mobo: LENOVO model: SHARKBAY v: 31900006 STD Bios: LENOVO v: IMKT23AUS date: 05/18/2016&#xA;CPU:       Dual core Intel Core i3-4130T (-HT-MCP-) cache: 3072 KB&#xA;           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 11572&#xA;           clock speeds: max: 2900 MHz 1: 2893 MHz 2: 2893 MHz 3: 2893 MHz 4: 2893 MHz&#xA;Graphics:  Card-1: Intel 4th Generation Core Processor Family Integrated Graphics Controller bus-ID: 00:02.0&#xA;           Card-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M] bus-ID: 01:00.0&#xA;           Display Server: X.Org 1.19.5 drivers: (unloaded: fbdev,vesa) Resolution: 1920x1080@60.59hz&#xA;           GLX Renderer: Mesa DRI Intel Haswell GLX Version: 3.0 Mesa 17.2.8 Direct Rendering: Yes&#xA;Audio:     Card-1 Intel 8 Series/C220 Series High Definition Audio Controller&#xA;           driver: snd_hda_intel bus-ID: 00:1b.0&#xA;           Card-2 Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller&#xA;           driver: snd_hda_intel bus-ID: 00:03.0&#xA;           Sound: Advanced Linux Sound Architecture v: k4.13.0-36-generic&#xA;Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;           driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 05:00.0&#xA;           IF: enp5s0 state: down mac: &amp;lt;filter&amp;gt;&#xA;           Card-2: Realtek RTL8188EE Wireless Network Adapter driver: rtl8188ee port: c000 bus-ID: 06:00.0&#xA;           IF: wlp6s0 state: up mac: &amp;lt;filter&amp;gt;&#xA;Drives:    HDD Total Size: 1000.2GB (39.3% used) ID-1: /dev/sda model: ST1000DM003 size: 1000.2GB temp: 34C&#xA;Partition: ID-1: / size: 902G used: 352G (42%) fs: ext4 dev: /dev/sda3&#xA;           ID-2: swap-1 size: 16.78GB used: 0.00GB (0%) fs: swap dev: /dev/sda2&#xA;RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present&#xA;Sensors:   System Temperatures: cpu: 29.8C mobo: 27.8C&#xA;           Fan Speeds (in rpm): cpu: N/A&#xA;Info:      Processes: 198 Uptime: 17 min Memory: 1570.2/7890.0MB Init: systemd runlevel: 5 Gcc sys: 5.4.0&#xA;           Client: Shell (bash 4.3.481) inxi: 2.2.35 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-03-08T23:37:22.360" Title="Only mpv player plays video" Tags="|release-loki|videos|video-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15043" PostTypeId="1" AcceptedAnswerId="15069" CreationDate="2018-03-07T21:56:08.870" Score="0" ViewCount="1299" Body="&lt;p&gt;I'm installing elementary OS on a Toshiba Satellite l15-b1330 laptop; this laptop was slow with W10 on it, so I opted to format the drive completely and run only elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the aforementioned message appears upon boot. The bootloader doesn't seem to load?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use rEFInd, it'll let me boot into the installed environment. But I don't know how to make it so that I don't need to always boot from rEFInd on a USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I appreciate any help in advance, thanks so much!&lt;/p&gt;&#xA;" OwnerUserId="13984" LastEditorUserId="308" LastEditDate="2018-08-07T17:18:17.913" LastActivityDate="2018-08-07T17:18:36.403" Title="elementary OS won't boot: displays &quot;reboot and select proper boot device&quot;" Tags="|release-loki|boot|grub|uefi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15044" PostTypeId="2" ParentId="15038" CreationDate="2018-03-07T23:07:09.297" Score="0" Body="&lt;p&gt;I got this working over Bluetooth by building the latest Kernel after applying this patch, &lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=99881#c41&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.kernel.org/show_bug.cgi?id=99881#c41&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13973" LastActivityDate="2018-03-07T23:07:09.297" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15045" PostTypeId="1" CreationDate="2018-03-08T21:25:32.273" Score="0" ViewCount="78" Body="&lt;p&gt;have a Lenovo Ideapad 310, Intel i7 7th gen, 8GB DDR4 RAM and HDD instead of SSD. Boot time is acceptable, but when I open the lid to wake up the laptop from suspend, elementary takes 10 to 20 seconds to show login screen (and in Windows 10 wake up works instantaneously).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea of what could be happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I've noticed that when the laptop is plugged to AC, fan speed skyrockets despite cpu being cold. What the hell is going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed preload and tlp.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: After hours staying in suspend mode, I opened the lid and the laptop woke up instantaneously. Maybe the problem is a too short spread between suspending and waking up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="13990" LastEditorUserId="13990" LastEditDate="2018-03-09T09:57:15.507" LastActivityDate="2018-03-09T09:57:15.507" Title="It takes up to 10-20sec to wake up from suspend, and high fan speed when plugged to AC, Why?" Tags="|greeter|suspend|lenovo|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15046" PostTypeId="2" ParentId="15040" CreationDate="2018-03-08T23:37:22.360" Score="1" Body="&lt;p&gt;I believe I've had this issue before when I was using an Nvidia card. The solution for me was (ensuring your graphics drivers are installed and up to date (this can be done from within the AppCenter, in the 'Updates' tab)) installing ffmpeg and the gstreamer packages. &lt;code&gt;sudo apt install ffmpeg gstreamer1*&lt;/code&gt;. Let me know if this works for you, I hope it does, otherwise, this must be something else.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2018-03-08T23:37:22.360" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15051" PostTypeId="1" CreationDate="2018-03-09T11:13:05.730" Score="1" ViewCount="101" Body="&lt;p&gt;I am a self-employed developer who uses elementary OS in my daily work, and since I really like elementary I want to contribute economically by paying for the installation ISO. However, I have had to pay out my own pocket each time since there is no option for entering a Company Name and VAT Number in the purchase dialog. I'm probably not the only one who likes elementary and also owns a (small) company, and I guess this could affect the sales negatively if people are not willing to pay out of your own pockets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any others in a similar situation? In that case, how did you solve it? My suggestion to the elementary team is otherwise to add options for entering such details in the purchase dialog, so that I (and others in my situation) won't be put off from purchasing the installation ISOs.&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2019-01-25T02:08:50.843" Title="How to purchase elementary OS on the company? (No option for entering Company Name and VAT Number)" Tags="|elementary-website|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15052" PostTypeId="2" ParentId="15051" CreationDate="2018-03-09T15:25:39.270" Score="1" Body="&lt;p&gt;If you pay from a credit card that belongs to your company, and not you personally, maybe it's enough. Talk to an accountant about it, maybe by paying with the company's credit card, even without VAT, you can deduct the expense. Or maybe the accountant can book it as a donation, which technically it is. (I can't give you a definitive answer, bookkeeping varies from country to country.)&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2018-03-09T15:37:03.943" LastActivityDate="2018-03-09T15:37:03.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15054" PostTypeId="2" ParentId="3712" CreationDate="2018-03-09T18:29:18.530" Score="0" Body="&lt;p&gt;This problem solved with Firefox 60.0b2 :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yaive.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yaive.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5442" LastActivityDate="2018-03-09T18:29:18.530" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15055" PostTypeId="1" CreationDate="2018-03-09T19:28:54.560" Score="1" ViewCount="990" Body="&lt;p&gt;&lt;strong&gt;Device:&lt;/strong&gt; HP EliteBook 2760p&lt;br&gt;&#xA;&lt;strong&gt;Distro:&lt;/strong&gt; elementary OS Loki (based on Ubuntu 16.04)&lt;br&gt;&#xA;&lt;strong&gt;Linux kernel:&lt;/strong&gt; 4.4.0-112-generic  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;tl;dr&lt;/strong&gt; No matter what I've tried, I can't make sound come out of &lt;strong&gt;my headphones and only my headphones.&lt;/strong&gt; However, I can make sound come out of my headphones and speakers &lt;strong&gt;at the same time.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When no headphones are plugged in, sound plays out of the speakers fine. Below are screenshots of my system when &lt;strong&gt;no headphones are plugged in&lt;/strong&gt; and sound is playing out of the speakers. Everything is bueno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings &gt; Sound:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Epd5b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Epd5b.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pavucontrol:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/msS2X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/msS2X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsamixer:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2V94Z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2V94Z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;When I plug in headphones,&lt;/strong&gt; all sound cuts off. No audio comes out of the headphones or speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are screenshots of the same areas, except all I do is plug in headphones. I change no other configuration, and the screens automatically look this way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings &gt; Sound:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/DUgYV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DUgYV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;When headphones are plugged in, the output device changes from &quot;Speakers&quot; to &quot;Headphones&quot; under Settings &gt; Sound. No sound plays through the headphones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pavucontrol:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/bFu5b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bFu5b.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;The port switched to &quot;Headphones (plugged in)&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsamixer:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vwY4k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vwY4k.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If I open pavucontrol and go under Output Devices, &lt;code&gt;Headphones (plugged-in)&lt;/code&gt; is selected. If I change that dropdown to &lt;code&gt;Speakers (unavailable)&lt;/code&gt; sounds starts playing out of the headphones, &lt;strong&gt;but the same audio simultaneously plays out of the computer's internal speakers.&lt;/strong&gt; I cannot figure out how to make sound play out of the headphones and not the internal speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DmokZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DmokZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the screen above, &lt;strong&gt;sound comes out of both my headphones and the internal speaker at the same time.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't recall having this issue on this device in the past. I left the device in a closet without a hard drive for a year. Then I cloned a hard drive from another laptop and put it in (ie the OS was installed on a different device). I'm wondering if reinstalling the OS will fix it, but I'd rather not do that if I can fix it another way.&lt;/p&gt;&#xA;" OwnerUserId="14000" LastActivityDate="2021-09-29T18:53:55.580" Title="My headphones don't work unless I choose &quot;Speakers (Unavailable)&quot; in pavucontrol, except then sound comes out of my internal speakers too" Tags="|release-loki|sound|audio|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15056" PostTypeId="2" ParentId="14977" CreationDate="2018-03-09T21:09:11.237" Score="0" Body="&lt;p&gt;sudo apt upgrade&#xA;[sudo] password for sam:&lt;br&gt;&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  gir1.2-json-1.0 libatkmm-1.6-1v5 libcairomm-1.0-1v5 libdbusmenu-gtk4 libglibmm-2.4-1v5 libido3-0.1-0 libllvm4.0 libpangomm-1.4-1v5 libqmi-glib1 libsigc++-2.0-0v5&#xA;  libvala-0.34-0 linux-headers-4.10.0-32 linux-headers-4.10.0-32-generic linux-image-4.10.0-32-generic linux-image-extra-4.10.0-32-generic sbsigntool&#xA;Use 'sudo apt autoremove' to remove them.&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;Need to get 0 B/450 kB of archives.&#xA;After this operation, 0 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;dpkg: error processing package apparmor (--configure):&#xA; package is in a very bad inconsistent state; you should&#xA; reinstall it before attempting configuration&#xA;Errors were encountered while processing:&#xA; apparmor&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;" OwnerUserId="13912" LastActivityDate="2018-03-09T21:09:11.237" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15057" PostTypeId="1" AcceptedAnswerId="15058" CreationDate="2018-03-10T00:40:50.257" Score="2" ViewCount="20329" Body="&lt;p&gt;I installed elementary OS on my laptop(14-inch,1080p). and the icon and text are just too small, smaller than Win10.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Textsize in the settings only effects on the preinstalled applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried setting &lt;strong&gt;scale-factor&lt;/strong&gt; in the terminal, but it only let me set either 1 or 2(200%), I want to scale around 125%~150%, how can I do this? &lt;/p&gt;&#xA;" OwnerUserId="14004" LastEditorUserId="308" LastEditDate="2018-08-07T18:06:26.120" LastActivityDate="2018-08-07T18:06:26.120" Title="Can I scale everything at 125%?" Tags="|release-loki|fonts|user-interface|" AnswerCount="1" CommentCount="5" ClosedDate="2018-11-30T19:57:47.067" ContentLicense="CC BY-SA 4.0" />
  <row Id="15058" PostTypeId="2" ParentId="15057" CreationDate="2018-03-10T02:16:58.660" Score="8" Body="&lt;p&gt;I think what you may be looking for can be done by using dconf-editor. If you do not have it installed, you can do so in Terminal with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once installed, open dconf-editor and in the left pane navigate to org&gt; gnome&gt; desktop&gt; interface then look for 'text-scaling-factor' in the right pane. The default is, of course, set to 1.0. You can put in 1.25 or 1.50 then hit tab and the change will take effect immediately. You can also search with the editor for other scaling options, too. One word of caution...be very careful using dconf-editor as many a desktop has been botched in one way or the other using the tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps and Good Luck!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I just saw Sean's comment to your question and that may be closer to what you're looking for...&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-03-10T02:16:58.660" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="15060" PostTypeId="1" AcceptedAnswerId="15063" CreationDate="2018-03-10T06:53:18.317" Score="2" ViewCount="95" Body="&lt;p&gt;I installed elementary OS alongside Windows 10, now every time grub menu will show up my PC startup.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I enter elementary OS without choosing it? and how can I boot Windows 10 if elementary OS has defaulted?&lt;/p&gt;&#xA;" OwnerUserId="14004" LastEditorUserId="16827" LastEditDate="2019-04-13T07:09:19.217" LastActivityDate="2019-04-13T07:09:19.217" Title="Entering elementary OS directly" Tags="|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15061" PostTypeId="1" CreationDate="2018-03-10T07:21:11.850" Score="0" ViewCount="479" Body="&lt;p&gt;I need to upgrade my elementary to either Ubuntu 16.10 or above, but Loki is still on 16.04. Is there a safe way for me to upgrade my Ubuntu version but keep the elementary look? If not, when will the next release come out?&lt;/p&gt;&#xA;" OwnerUserId="14010" LastActivityDate="2018-03-10T08:45:44.143" Title="Upgrading Ubuntu Version" Tags="|release-loki|updates|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15062" PostTypeId="2" ParentId="15061" CreationDate="2018-03-10T08:45:44.143" Score="1" Body="&lt;p&gt;I'm afraid that's not so simple. elementary OS is more than a look on top of Ubuntu:&lt;br&gt;&#xA;&lt;a href=&quot;https://elementary.io/open-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/open-source&lt;/a&gt;&lt;br&gt;&#xA;elementary OS is always build on a LTS (Long term support) version of Ubuntu, the next LTS (18.04) should be released in April. Meaning that the next elementary OS will be released some time after that, &quot;When it's ready&quot;.&#xA;More info:&lt;br&gt;&#xA;&lt;a href=&quot;https://medium.com/elementaryos/lets-talk-about-elementary-os-5-0-juno-a3a65b97ee7e&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/lets-talk-about-elementary-os-5-0-juno-a3a65b97ee7e&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-03-10T08:45:44.143" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15063" PostTypeId="2" ParentId="15060" CreationDate="2018-03-10T11:38:44.027" Score="3" Body="&lt;p&gt;If you want to dualboot elementary and Windows you'll have to see the grub menu every time you turn your pc on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if you barely use one of those operating systems, you could hide the grub menu and edit a config file every time you want to access the other system. I don't recommend doing this since it's probably not worth the trouble.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To hide your grub menu you need to edit &lt;code&gt;/etc/default/grub&lt;/code&gt; and set the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=&quot;0&quot;&#xA;GRUB_HIDDEN_TIMEOUT=0.0&#xA;GRUB_HIDDEN_TIMEOUT_QUIET=true&#xA;#GRUB_TIMEOUT=5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You don't need to set any value to &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt;, but you have to add a &quot;#&quot; at the beginning of the line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;IMPORTANT: Check whats the number of the elementary option on the grub menu, if it's the first line (usually yes), then setting &lt;code&gt;GRUB_DEFAULT=&quot;0&quot;&lt;/code&gt; will boot that line, otherwise you'd need to change the number.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you finish editing that file, execute from terminal &lt;code&gt;sudo update-grub&lt;/code&gt; and reboot to see the results.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-10T11:38:44.027" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15064" PostTypeId="2" ParentId="15055" CreationDate="2018-03-10T11:42:25.570" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;If I open pavucontrol and go under Output Devices, Headphones (plugged-in) is selected. If I change that dropdown to Speakers (unavailable) sounds starts playing out of the headphones, but the same audio simultaneously plays out of the computer's internal speakers. I cannot figure out how to make sound play out of the headphones and not the internal speakers.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Do that and then open &lt;code&gt;alsamixer&lt;/code&gt; and mute the Speakers line. You can do this by moving right with the arrows and pressing m.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Anyway your issue sounds like a bug with your soundcard. I'd highly recommend to reinstall elementary, update it and try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you could try with another headset, just to be sure.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-10T11:42:25.570" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15065" PostTypeId="2" ParentId="6796" CreationDate="2018-03-10T13:24:10.307" Score="1" Body="&lt;p&gt;This is a re-hash of a very good &lt;a href=&quot;https://www.kariliq.nl/misc/firefox-dirs.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;post&lt;/a&gt; about this, but I'm including this for other like me who might stumble here and who want to understand a bit more about why this is happening&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The reason why Firefox insists on creating these directories is that it follows a freedesktop.org practice attempting to standardise how applications use “well known” directories.&lt;/p&gt;&#xA;&lt;p&gt;Fortunately, however, this standard also offers a way to prevent Firefox from creating these directories.&lt;/p&gt;&#xA;&lt;p&gt;Edit the ~/.config/user-dirs.dirs file so that it has the following contents.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DESKTOP_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_DOCUMENTS_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_DOWNLOAD_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_MUSIC_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_PICTURES_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_PUBLICSHARE_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_TEMPLATES_DIR=&amp;quot;$HOME/&amp;quot;&#xA;XDG_VIDEOS_DIR=&amp;quot;$HOME/&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; does not exist, you can simply create it&lt;/p&gt;&#xA;" OwnerUserId="14013" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-03-10T13:24:10.307" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15067" PostTypeId="2" ParentId="14412" CreationDate="2018-03-10T15:06:20.757" Score="1" Body="&lt;p&gt;Well, after disabling &quot;Physical Clicking&quot; in &quot;Mouse &amp;amp; Touchpad&quot; settings and rebooting the system it works perfectly.&lt;/p&gt;&#xA;" OwnerUserId="14015" LastActivityDate="2018-03-10T15:06:20.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15068" PostTypeId="1" CreationDate="2018-03-10T15:28:42.710" Score="0" ViewCount="920" Body="&lt;p&gt;on arch-site i found this (gnome-web):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.Epiphany.web:/org/gnome/epiphany/web/ user-agent 'Bunnies! Lots of bunnies in my user agent!'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but when i run it on terminal it does not work.&#xA;prompts out: &lt;code&gt;&quot;scema is not movable (path must not be given)&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;so i tried it without the path:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.Epiphany.web user-agent 'Bunnies! Lots of bunnies in my user agent!'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and now it says: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;no such key &amp;lt;user-agent&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so anybody there with a suggestion to fix that?&#xA;Would be grate! ;)&lt;/p&gt;&#xA;" OwnerUserId="14017" LastActivityDate="2018-03-11T15:31:04.550" Title="Epiphany: Change user-agent" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15069" PostTypeId="2" ParentId="15043" CreationDate="2018-03-10T16:45:37.470" Score="0" Body="&lt;p&gt;I've managed to figure it out. It seems that the main issue was that GRUB hadn't completely installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, I used the elementary OS live-boot USB that I'd made with Rufus to boot into a live environment. I needed to install boot-repair, which needed a repository added. I ran:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which allowed me to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair &amp;amp;&amp;amp; sudo apt-get update&#xA;sudo apt-get install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I followed all instructions, made sure to ensure that GRUB was purged, and after reboot, the laptop booted up perfectly! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, after the first reboot, the problem returned with an additional error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to open \EFI\BOOT\grubx64.efi - Not Found&#xA;Failed to load image \EFI\BOOT\grubx64.efi: Not Found&#xA;start_image() returned Not Found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I booted back into the USB live environment, opened a terminal, and ran&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo bash&#xA;cd /boot/efi/EFI&#xA;sudo cp -p ubuntu/grubx64.efi Boot&#xA;sudo touch ubuntu/grubx64.efi.gbr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the laptop has no issues when booting. :D&lt;/p&gt;&#xA;" OwnerUserId="13984" LastEditorUserId="308" LastEditDate="2018-08-07T17:18:36.403" LastActivityDate="2018-08-07T17:18:36.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15070" PostTypeId="2" ParentId="7550" CreationDate="2018-03-10T17:21:00.273" Score="0" Body="&lt;p&gt;Just found out that the default dropbox script simply copies  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/share/applications/dropbox.desktop&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;to &lt;code&gt;$HOME/.config/autostart/dropbox.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, instead of using the scripts suggested in the answer, simply edit &lt;code&gt;/usr/share/applications/dropbox.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change the exec line to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start -i&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then overwrite the autostart file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cp /usr/share/applications/dropbox.desktop &#xA;$HOME/.config/autostart/dropbox.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, logout and login again and the problem is solved, forever. ;)&lt;/p&gt;&#xA;" OwnerUserId="13924" LastEditorUserId="3018" LastEditDate="2018-03-11T10:03:32.503" LastActivityDate="2018-03-11T10:03:32.503" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15071" PostTypeId="2" ParentId="5205" CreationDate="2018-03-10T21:27:21.967" Score="1" Body="&lt;p&gt;You could try installing steam from app center built into elementary! Just search steam and hit the free button. &lt;/p&gt;&#xA;" OwnerUserId="14018" LastActivityDate="2018-03-10T21:27:21.967" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15072" PostTypeId="1" AcceptedAnswerId="15078" CreationDate="2018-03-10T23:20:55.993" Score="1" ViewCount="317" Body="&lt;p&gt;I installed Elementary os 0.4.1 loki on my Sony SVE1513W1RB. First I encountered a problem when the system wakes up from suspend keyboard and touch pad won't work. Fixed this problem by adding &lt;code&gt;i8042.direct i8042.dumbkbd&lt;/code&gt; into file &lt;code&gt;/etc/default/grub&lt;/code&gt; into parametr &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt;. Now when system resumes after suspend all keyboard indicators (caps lock, scroll lock, num lock) are always lighting up and are uncontrollable. Can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="14022" LastActivityDate="2018-03-14T07:22:26.760" Title="Keyboard indicators always on" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15074" PostTypeId="1" CreationDate="2018-03-11T08:07:34.767" Score="1" ViewCount="249" Body="&lt;p&gt;I'm in the Starbucks and I couldn't connect to their free wifi, login page just wouldn't show up(any browsers).&lt;br&gt;&#xA;I tried to direct to the login page by copying login link form my smartphone, but it didn't work, has anyone encountered this problem and solved it?&lt;br&gt;&#xA;I found some Ubuntu users have this problem too. It's not only happening at Starbucks, I went to other places where needed to accept from a login page and couldn't connect as well.&lt;br&gt;&#xA;I'm frustrated and typing this post by using my cellphone's mobile data.&lt;/p&gt;&#xA;" OwnerUserId="14004" LastActivityDate="2018-03-11T10:19:01.980" Title="How can I connect to the free wifi in cafe" Tags="|wifi|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15076" PostTypeId="2" ParentId="15032" CreationDate="2018-03-11T08:57:08.227" Score="1" Body="&lt;p&gt;I had a similar problem, my solution was to simply grabbed the deb file from the author's official website and install it whit Eddy.&lt;/p&gt;&#xA;" OwnerUserId="14025" LastActivityDate="2018-03-11T08:57:08.227" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15077" PostTypeId="2" ParentId="15074" CreationDate="2018-03-11T10:19:01.980" Score="1" Body="&lt;p&gt;When you try to connect to a wifi network that requires some sort of login page it will automatically show up. You just need to go to the wifi indicator, press over the network name and the window will appear after a while (it should take less than 5 min).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If that didn't work, you can try to delete the wifi network from System Settings &gt; Network &gt; Wireless &gt; Edit Connections... and then do the whole process described earlier again.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-11T10:19:01.980" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15078" PostTypeId="2" ParentId="15072" CreationDate="2018-03-11T10:33:03.160" Score="2" Body="&lt;p&gt;&lt;a href=&quot;http://lightrush.ndoytchev.com/random-1/i8042quirkoptions&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you can see why the indicators don't work. It's caused by &lt;code&gt;i8042.dumbkbd&lt;/code&gt;. If you delete that part the issue will disappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, checking &lt;a href=&quot;https://askubuntu.com/questions/916465/ubuntu-17-04-keyboard-not-responding-after-suspend&quot;&gt;this question&lt;/a&gt; I've found that using &lt;code&gt;atkbd.reset&lt;/code&gt; instead of &lt;code&gt;i8042.direct i8042.dumbkbd&lt;/code&gt; will make the keyboard and touchpad work without having the issues that you comment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, just change that line and don't forget to &lt;code&gt;sudo update-grub&lt;/code&gt; and reboot.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2018-03-14T07:22:26.760" LastActivityDate="2018-03-14T07:22:26.760" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="15080" PostTypeId="2" ParentId="565" CreationDate="2018-03-11T14:17:50.350" Score="0" Body="&lt;p&gt;It is possible, but you need Nautilus:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Nautilus and find your folder &gt; right click on it and select properties &gt; click on the folder icon at the top right of the properties window &gt; choose your new icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you have done that add your folder to the dock (remove it first if it is already there).&lt;/p&gt;&#xA;" OwnerUserId="6756" LastActivityDate="2018-03-11T14:17:50.350" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15081" PostTypeId="2" ParentId="15068" CreationDate="2018-03-11T15:31:04.550" Score="1" Body="&lt;p&gt;The instructions you found for Arch are correct for modern versions of Epiphany, but Loki ships with Epiphany 3.18, which is old. Removing the path was good, but the schema ID also changed slightly. I think this should work:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.Epiphany user-agent 'Bunnies! Lots of bunnies in my user agent!'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2018-03-11T15:31:04.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15083" PostTypeId="1" AcceptedAnswerId="15084" CreationDate="2018-03-11T20:26:30.137" Score="0" ViewCount="977" Body="&lt;p&gt;In my setup, whenever I wake up from suspend, the login window comes up in another monitor that's in a different room. I can't seem to get the display manager to run the login window in my main display, so I thought of simply getting rid of its annoyance. Up to now I've been unsuccessful in doing so. I've tried editing /etc/default/acpi-support and commenting out the &lt;code&gt;LOCK_SCREEN&lt;/code&gt; line, and also ran &lt;code&gt;gsettings set org.gnome.desktop.lockdown disable-lock-screen 'true'&lt;/code&gt; and &lt;code&gt;gsettings set org.gnome.desktop.screensaver ubuntu-lock-on-suspend 'false'&lt;/code&gt; , which were quoted as valid solutions to my problem (so the system would just autologin like it's supposed to after waking up from sleep or hibernate), but to no avail. I'm out of options at the moment. Is there something else I can do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="14031" LastActivityDate="2018-03-11T21:17:42.117" Title="how to enable automatic login after waking up from suspend in Loki?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15084" PostTypeId="2" ParentId="15083" CreationDate="2018-03-11T21:17:42.117" Score="0" Body="&lt;p&gt;Go into &lt;code&gt;System Settings &amp;gt; Security &amp;amp; Privacy &amp;gt; Locking&lt;/code&gt; and disable both options. Also if you want to autologin every time you boot up your PC you have to enable the option inside &lt;code&gt;User Accounts&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-11T21:17:42.117" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15085" PostTypeId="1" CreationDate="2018-03-11T23:11:30.030" Score="2" ViewCount="89" Body="&lt;p&gt;After restarting elementary many keystrokes return the wrong value, consistently across all keyboard layouts. I tried French, German, Japanese Layouts. &#xA;Its also not due to my physical keyboard, which works fine when I boot into windows7. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&#xA; 'backspace' returns ']'&lt;/li&gt;&#xA; &lt;li&gt;'apostrophe' ' returns 'backspace'&lt;/li&gt;&#xA; &lt;li&gt;'[' open brackets returns colon ':'&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The onboard keyboard also seems to suggest that there are additional keys on my keyboard near enter and left shift for ESC and less than &amp;lt; . Is there a file I can edit or a way to reset all key assigments? &lt;/p&gt;&#xA;" OwnerUserId="14032" LastActivityDate="2023-12-22T07:04:05.507" Title="Keyboard layout permanently modified/corrupted. Need help!" Tags="|keyboard|keyboard-layout|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15087" PostTypeId="2" ParentId="14977" CreationDate="2018-03-12T19:56:39.940" Score="0" Body="&lt;p&gt;That's a standard error when some process is already using dkpg or you didn't complete a update process successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a start, try to reinstall apparmor: &lt;code&gt;sudo apt install --reinstall -f apparmor&lt;/code&gt;. Then edit your question if any new error appears.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-12T19:56:39.940" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15088" PostTypeId="1" AcceptedAnswerId="15097" CreationDate="2018-03-12T21:08:08.907" Score="0" ViewCount="499" Body="&lt;p&gt;I have just installed ElementaryOS on a brand new laptop (Dell Vostro 3568), and I can't get physical secondary button to work. When I set &quot;Primary button&quot; to left in touchpad settings, all physical clicks are left, and when I set it to right all physical clicks are right. I have tried all options for &quot;Physical clicking&quot; setting and they don't appear to change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tap-to-click (left) and tap-with-two-fingers-to-click (right) always work as expected, regardless of primary button setting. I'm coming from Ubuntu, and have never used Elementary, but I can get around Linux fairly well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The touchpad on my laptop has entire surface clickable (i.e. it's a clickpad) and I'd like the lower right portion of it to act as a secondary click.&lt;/p&gt;&#xA;" OwnerUserId="14039" LastEditorUserId="14039" LastEditDate="2018-03-13T14:25:40.647" LastActivityDate="2018-03-13T14:25:40.647" Title="Secondary physical button doesn't work on clickpad using libinput" Tags="|touchpad|drivers|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15091" PostTypeId="2" ParentId="14674" CreationDate="2018-03-13T04:05:17.473" Score="0" Body="&lt;p&gt;I have the same problem and it was java ppa.&#xA;I unselected java ppa via synaptic and reload the update and it was fine.&lt;/p&gt;&#xA;" OwnerUserId="14043" LastActivityDate="2018-03-13T04:05:17.473" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15096" PostTypeId="1" CreationDate="2018-03-13T14:22:50.870" Score="1" ViewCount="51" Body="&lt;p&gt;In the keyboard settings, we have shortcuts to open a terminal or file explorer, What I want to do is when I pressing  &lt;kbd&gt;Windows&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; switch to the current terminal, &lt;kbd&gt;Windows&lt;/kbd&gt;+&lt;kbd&gt;E&lt;/kbd&gt; switch to the file explorer.&lt;br&gt;&#xA;It always opens a new one for me, which is I don't want to.&lt;/p&gt;&#xA;" OwnerUserId="14004" LastActivityDate="2023-10-26T18:19:26.777" Title="Can I switch to the current terminal (file explorer) but not open a new one" Tags="|pantheon-files|keyboard-shortcuts|pantheon-terminal|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15097" PostTypeId="2" ParentId="15088" CreationDate="2018-03-13T14:23:19.887" Score="0" Body="&lt;p&gt;The trouble was in libinput, the input driver that comes installed with eOS to handle input events. It seems that it can't recognize clickpads (touchpads which have entire surface clickable) and differentiate between primary and secondary clicks. synaptics, an older driver handles this as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you do uninstall libinput (&lt;code&gt;xserver-xorg-input-libinput&lt;/code&gt;) and install synaptics instead (&lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt;) you risk your keyboard breaking down, as mine did. Instead, &lt;strong&gt;install the synaptics driver&lt;/strong&gt; alongside libinput. As far as I remember, there were some conflicts during installation, but aptitude was able to resolve them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, in your &lt;code&gt;/usr/share/X11/xorg.conf.d/90-libinput.conf&lt;/code&gt; remove the section which mentions touchpad &lt;em&gt;(this might not be necessary, but didn't harm)&lt;/em&gt;. Copy the &lt;code&gt;/usr/share/X11/xorg.conf.d/50-synaptics.conf&lt;/code&gt; to &lt;code&gt;/etc/X11/xorg.conf.d/&lt;/code&gt; and add the &lt;code&gt;Option &quot;ClickPad&quot; &quot;true&quot;&lt;/code&gt; line to the section with identifier &lt;code&gt;&quot;touchpad catchall&quot;&lt;/code&gt; (&lt;a href=&quot;https://askubuntu.com/a/957831/216372&quot;&gt;described here&lt;/a&gt;). Finally, save everything and reboot.&lt;/p&gt;&#xA;" OwnerUserId="14039" LastActivityDate="2018-03-13T14:23:19.887" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15098" PostTypeId="1" CreationDate="2018-03-13T23:29:35.383" Score="1" ViewCount="112" Body="&lt;p&gt;I just installed 4.13.0-36-generic on a spare drive.  MB is a Supermicro C2SEA, so RealTek ALC888.  Everything is working, but my headphones.  I have searched around on Google and found little information that was helpful.  Sound works on my regular speakers.  When I plug in the headphones into front headphone jack, I still hear sounds from speakers only.&#xA;Sound settings show only Line Out and Digital Output (S/PDIF). No Headphones listed.  I have tried the suggestion: alsactl restore but no change.  Any suggestions? Thanks in advance, it's been a long time since I worked with Linux.&lt;/p&gt;&#xA;" OwnerUserId="14051" LastActivityDate="2019-05-08T16:01:05.230" Title="Headphone option missing in mixer" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15099" PostTypeId="2" ParentId="15098" CreationDate="2018-03-14T08:27:58.683" Score="1" Body="&lt;p&gt;try PulseAudio, and select proper playback/output device/port.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-03-14T08:27:58.683" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15102" PostTypeId="1" CreationDate="2018-03-14T14:05:54.977" Score="0" ViewCount="182" Body="&lt;p&gt;I installed elementary OS and I can't seem to access drive D: and E: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previously, it used to show that it could not mount. &#xA;Right now, it does not show anything. The drives do not open at all.&lt;/p&gt;&#xA;" OwnerUserId="14053" LastEditorUserId="84" LastEditDate="2018-05-05T23:22:28.673" LastActivityDate="2024-04-05T06:02:35.323" Title="Can't access other drives after installing elementary" Tags="|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15103" PostTypeId="2" ParentId="12917" CreationDate="2018-03-14T17:05:00.230" Score="1" Body="&lt;p&gt;Ditto with a regular external monitor over TB (no dock)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;USB keyboard doesn't wake the laptop.. the lid has to be opened :(&lt;/p&gt;&#xA;" OwnerUserId="14056" LastActivityDate="2018-03-14T17:05:00.230" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15104" PostTypeId="2" ParentId="15102" CreationDate="2018-03-14T22:04:47.343" Score="0" Body="&lt;p&gt;Based on my experience, if you shutdown windows 10 it does not shut down, but hibernates and that's why you cannot mount the drive where it resists. If you restart it and log on into elementary os then you have access to the windows drives but sometimes there are problems with the audio for example. So the best solution for me is to restart windows,on the choose os screen to shutdown the computer and then start it again into elementary os. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-03-14T22:04:47.343" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15105" PostTypeId="2" ParentId="14985" CreationDate="2018-03-14T23:10:31.587" Score="0" Body="&lt;p&gt;I have such a problem when my video driver is set to use the internal Intel video card instead of the Nvidia one, and this is because on my hp laptop the HDMI port is on the Nvidia graphics card and there is no access to the internal Intel one. Check out if your configuration is similar &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-03-14T23:10:31.587" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="15106" PostTypeId="2" ParentId="14939" CreationDate="2018-03-15T00:40:55.023" Score="1" Body="&lt;p&gt;The only way I have managed to run kdenlive is by an appimage. Works like a charm. This is what I recommend.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://kdenlive.org/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://kdenlive.org/download/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Latest stable AppImage (17.12.0) is available here:&#xA;&lt;a href=&quot;https://files.kde.org/kdenlive/release/Kdenlive-17.12.0d-x86_64.AppImage.mirrorlist&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://files.kde.org/kdenlive/release/Kdenlive-17.12.0d-x86_64.AppImage.mirrorlist&lt;/a&gt;.&#xA;To install, just download the file and make it executable, ( chmod +x ) in a terminal, then run it.(or right click &gt; Properties &gt; set Execute on)&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2018-03-15T00:48:01.177" LastActivityDate="2018-03-15T00:48:01.177" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15109" PostTypeId="1" CreationDate="2018-03-16T01:03:06.747" Score="0" ViewCount="185" Body="&lt;p&gt;My AppCenter don't open. I've tried to reinstall but don't work. The app show that there's new updates, but, it don't open. Anyone can help me?&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2019-04-19T05:02:20.423" Title="AppCenter don't open" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15110" PostTypeId="1" CreationDate="2018-03-16T01:50:09.127" Score="1" ViewCount="2459" Body="&lt;p&gt;My laptop came with elementary OS, but it doesn't work well. Touchpad inoperational. Wifi intermittent. Difficult to download apps. The BIOS won't let me change boot order.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I remove elementary OS and install Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="13232" LastEditorUserId="16827" LastEditDate="2019-04-13T08:18:56.773" LastActivityDate="2019-10-11T16:01:35.373" Title="Remove elementary OS and install Ubuntu" Tags="|system-installation|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15111" PostTypeId="2" ParentId="15110" CreationDate="2018-03-16T07:17:44.607" Score="1" Body="&lt;p&gt;Download a Ubuntu live CD, extract it on a pen drive with unetbootin or any similar tool and start the installation process. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to backup your data.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-16T07:17:44.607" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15113" PostTypeId="2" ParentId="14169" CreationDate="2018-03-16T13:47:16.527" Score="1" Body="&lt;p&gt;I had similar problem, what worked for me is &lt;/p&gt;&#xA;&#xA;&lt;p&gt;right click blueman icon&gt; Local services &gt; check 'accept files from trusted devices' under 'transfer settings'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;try this link to troubleshoot any bluetooth problems&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://support.system76.com/articles/bluetooth/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.system76.com/articles/bluetooth/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14026" LastActivityDate="2018-03-16T13:47:16.527" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15115" PostTypeId="1" CreationDate="2018-03-16T16:55:19.213" Score="0" ViewCount="638" Body="&lt;p&gt;I've successfully got my Gmail account loaded with an app specific password but iCloud account will not connect.  I've generated app specific password for my iCloud ID and tried filling the username with and without the @icloud.com appended; I've tried both SSL/TLS and START/TLS; all the above in all possible variant combinations.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I get is the same &quot;Unable to validate: ● SMTP connection error&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched the &quot;Mail&quot; tagged answers in this and other forums and haven't found a solution.  What am I missing?&lt;/p&gt;&#xA;" OwnerUserId="14078" LastActivityDate="2024-04-02T12:02:15.307" Title="Unable to validate iCloud mail account SMTP connection error" Tags="|pantheon-mail|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15118" PostTypeId="2" ParentId="5465" CreationDate="2018-03-17T06:50:33.190" Score="1" Body="&lt;p&gt;Install &lt;a href=&quot;https://github.com/lordamit/Brightness&quot; rel=&quot;nofollow noreferrer&quot;&gt;Brightness Controller&lt;/a&gt; with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:apandada1/brightness-controller&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Version 1 with up to 4 Monitor Support:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install brightness-controller-simple&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Epewd.png&quot; alt=&quot;]([![Brightness Controller Version 1&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Version 2 with Multi Monitor Support and other features:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install brightness-controller&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://raw.githubusercontent.com/LordAmit/Brightness/master/img/BrightnessController.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://raw.githubusercontent.com/LordAmit/Brightness/master/img/BrightnessController.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;strong&gt;Note:&lt;/strong&gt; This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes.&lt;/p&gt;&#xA;" OwnerUserId="14086" LastEditorUserId="14086" LastEditDate="2018-06-03T04:25:12.020" LastActivityDate="2018-06-03T04:25:12.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15121" PostTypeId="1" CreationDate="2018-03-18T00:41:16.747" Score="1" ViewCount="8503" Body="&lt;p&gt;Every time I use either the; Terminal and the &lt;code&gt;sudo apt-get update&lt;/code&gt; command or just open the App Center,(auto updates every time its opened) i get a pop up saying &lt;code&gt;Failed to Fetch Updates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cant seem to find the answer anywhere online. Can someone please help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I get the pop up and after clicking details i get the following information --&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'cdrom://elementary OS 0.4.1 Loki - Stable amd64 (20180214) xenial Release' does not have a Release file.&#xA;W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: cdrom://elementary OS 0.4.1 Loki - Stable amd64 (20180214) xenial/contrib amd64 Packages is not (yet) available (Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14095" LastEditorUserId="14105" LastEditDate="2018-03-27T10:28:46.117" LastActivityDate="2018-05-27T20:25:40.110" Title="“Failed to fetch updates” in App Center while using Elementary OS Loki" Tags="|updates|software-installation|appcenter|repositories|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15123" PostTypeId="2" ParentId="15121" CreationDate="2018-03-18T03:11:23.133" Score="1" Body="&lt;p&gt;After Researching all day i finally found the answer. I hope this helps someone..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First open &lt;strong&gt;&quot;Software &amp;amp; Updates&quot;&lt;/strong&gt; and click on the &lt;strong&gt;&quot;Other Software&quot;&lt;/strong&gt; tab for my issue, The box at the top named &lt;strong&gt;&quot;cdrom:[elementary OS 0.4.1 &lt;em&gt;Loki&lt;/em&gt;-Stable amd64 (201880214)]/xenial&quot;&lt;/strong&gt; was &quot;checked&quot; or selected and it shouldn't have been. i unchecked and it was fixed.&lt;/p&gt;&#xA;" OwnerUserId="14095" LastActivityDate="2018-03-18T03:11:23.133" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15126" PostTypeId="1" AcceptedAnswerId="15137" CreationDate="2018-03-18T11:07:11.997" Score="0" ViewCount="295" Body="&lt;p&gt;I lost sound on my laptop. Speakers and headphones aren't shown on the Sound settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last time everything worked, I had restarted the computer in order to jump over to windows 10. But it was taking a lot of time, so I pressed the power button to force a power off event.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I came back to the elementary, no sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already tried:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo alsa force-reload&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And also:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get remove --purge alsa-base pulseaudio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install alsa-base pulseaudio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything else I could do or am I facing a reinstall?&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-03-19T14:23:51.190" Title="Sound simply went kaput" Tags="|drivers|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15128" PostTypeId="2" ParentId="15109" CreationDate="2018-03-18T12:50:39.850" Score="1" Body="&lt;p&gt;In the terminal type this command and see what error or output it gives..share the result also&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14026" LastActivityDate="2018-03-18T12:50:39.850" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15132" PostTypeId="1" CreationDate="2018-03-18T17:48:20.000" Score="1" ViewCount="944" Body="&lt;p&gt;I've completely removed the stock OS on my new laptop and successfully reinstalled it with the latest Windows 10 &lt;strong&gt;64-bit&lt;/strong&gt; (Redstone 4) MSDN ISO (erased all partitions, Win10 setup automatically recreated all necessary partitions,…). For that I've created a bootable USB flash drive using Rufus with NTFS file system and GPT partition scheme and that booted/installed perfectly fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I want to make a Windows/Linux Dual-Boot system and tried to boot from the elementary OS live USB but that failed everytime. I've tried all latest Ubuntu dereviate distro's, 64- en 32-Bit, ... but always the same negative result, a &lt;strong&gt;black screen with a white (non-blinking) underscore&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In UEFI I can perfectly set the boot priority to the preferred USB (it’s nicely detected as UEFI boot USB) but when it tries to boot from that it always gives me a &lt;strong&gt;black screen with a white (non-blinking) underscore&lt;/strong&gt;. I've tried secure boot enabled/disabled,... but always the same negative result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use a 2GB USB flash drive, formatted with latest Rufus in FAT32 file system en GPT partition scheme. I've tried all possible file system/partition schemes combinations, different USB flash drives,... but always the same negative result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tested the USB's on my other (UEFI) laptop and they all booted perfectly fine. The linux GRUB isn't loading at all on my new laptop and it seems like UEFI doesn't detect the USB UEFI partition scheme at boot (disabled by vendor? system to new for Ubuntu? perhaps some graphics issues?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It always gives me a &lt;strong&gt;black screen with a white (non-blinking) underscore&lt;/strong&gt; :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched like crazy for solutions on google and the manufacturer website with no results. Is there someone that can throw a light on this matter please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really would like to use elementary OS on my new laptop (Medion Akoya E3213T)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some hardware reports from AIDA64 (Win 10):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Computer Type ACPI x64-based PC /&#xA;Operating System Microsoft Windows 10 Home /&#xA;OS Version 10.0.17134.48 (Redstone 4) /&#xA;CPU Type DualCore Intel Celeron N3350, 2400 MHz /&#xA;Chipset Intel Apollo Lake /&#xA;System Memory 2048 MB /&#xA;Video Adapter Intel HD Graphics 500 /&#xA;Video Resolution 1920 x 1080 @ 60 Hz /&#xA;Monitor ID AUO272D /&#xA;Audio Adapter Intel Broxton HDMI @ Intel Apollo Lake SoC /&#xA;Audio Adapter Realtek ALC269 @ Intel Apollo Lake SoC /&#xA;IDE Controller Standard SATA AHCI Controller /&#xA;Disk Drive Toshiba 064G38 (64 GB eMMC) /&#xA;Keyboard HID Keyboard Device /&#xA;Keyboard Standard PS/2 Keyboard /&#xA;Mouse HID-compliant mouse /&#xA;Network Adapter Intel(R) Dual Band Wireless-AC 3165 /&#xA;USB3 Controller Intel Apollo Lake SoC - USB 3.0 Host Controller (xHCI) /&#xA;USB Device HD Camera /&#xA;USB Device Intel(R) Wireless Bluetooth(R) /&#xA;USB Device Realtek USB 2.0 Card Reader /&#xA;USB Device USB Composite Device /&#xA;BIOS Vendor American Megatrends Inc. /&#xA;BIOS Type AMI EFI /&#xA;BIOS Version V2.0.5_P2S0T1P1F3G2C2 /&#xA;SMBIOS Version 3.0 /&#xA;UEFI Boot Yes /&#xA;System BIOS Date 07/25/2017 /&lt;/p&gt;&#xA;" OwnerUserId="14106" LastEditorUserId="14106" LastEditDate="2018-05-31T11:57:49.887" LastActivityDate="2019-08-25T07:02:30.320" Title="Unable to boot from live-USB: black screen with a white (non-blinking) underscore" Tags="|boot|dual-boot|usb-drive|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15135" PostTypeId="2" ParentId="15115" CreationDate="2018-03-19T00:08:24.763" Score="0" Body="&lt;p&gt;Yes. Using the Mail app bundled with Elementary installation media and all the coordinates given by Apple iCloud support,  and then making the changes they suggest and trying in all variant combinations. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Frustrating? Nah. &lt;/p&gt;&#xA;" OwnerUserId="12468" LastActivityDate="2018-03-19T00:08:24.763" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15136" PostTypeId="1" CreationDate="2018-03-19T02:54:35.710" Score="0" ViewCount="53" Body="&lt;p&gt;how do I make terminal emulate the ctrl+v feature of other linux systems without disabling the ctrl+v copy/paste feature of elementary os terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks for any help.&lt;/p&gt;&#xA;" OwnerUserId="10578" LastEditorUserId="10578" LastEditDate="2018-03-20T00:22:34.610" LastActivityDate="2019-04-14T06:01:25.580" Title="how to emulate the ctrl+v feature of other linux terminals without disabling the ctrl+v paste feature" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15137" PostTypeId="2" ParentId="15126" CreationDate="2018-03-19T10:34:14.077" Score="0" Body="&lt;p&gt;An answer to anyone interested on this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched a lot and went far away in the hopes of finding a solution to my problem. Nothing worked and I simply got anxious and decided to reinstall the whole thing again (which was VERY time consuming and really frustrating, since I use all sorts of things for PHP and Java development and it's a PIA install all those things one after another, plus the backups, apps and customizations that I had ironed out and completely forgot about how I did it months ago).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That was a tiresome sunday that I wont ever get back, thanks to Linux and its shenanigans.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the kind of thing that puts me away from Linux for months.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways, just for referencing, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11356/system-sound-master-volume-is-not-working-anymore&quot;&gt;my problem was pretty much the same thing as this report&lt;/a&gt;. No that it seems to matter, but here you go.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-03-19T10:34:14.077" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15138" PostTypeId="1" CreationDate="2018-03-19T13:49:14.590" Score="0" ViewCount="866" Body="&lt;p&gt;I get the latest Elementary OS Loki, buy a new SSD drive for linux. Install Elementary OS there today(03/19) and the this is the first thing I do : &lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my result: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Failed to fetch http://packages.elementary.io/appcenter/dists/xenial/main/dep11/Components-amd64.yml.xz&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me here ? the other thread in this forum claims that the problem had been resolved, which isn't for me.&lt;/p&gt;&#xA;" OwnerUserId="2474" LastActivityDate="2023-12-09T19:07:45.890" Title="Failed to fetch Components-amd64.yml.xz when Update" Tags="|release-loki|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15139" PostTypeId="1" CreationDate="2018-03-19T13:53:09.470" Score="1" ViewCount="243" Body="&lt;p&gt;I just started using Elementary and needed to install virtualbox for my work. The version of virtualbox on AppCentre uses the same theme that all the other apps do, meaning that menus and buttons look pretty:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ns9me.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ns9me.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the version of virtualbox on AppCentre is outdated and I really need to use the more recent version on the virtualbox website, for security and compatibility reasons. Unfortunately the version I downloaded from the virtualbox repositories does not use the standard elementary theme, meaning all the buttons and GUI elements look really ugly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ozKAq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ozKAq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way I can get this new version of virtualbox to use the standard elementary themes, as in its current state it's somewhat of an eyesore? Perhaps there's something I can edit in the GNOME settings somewhere?&lt;/p&gt;&#xA;" OwnerUserId="14113" LastActivityDate="2018-03-19T17:14:53.413" Title="Virtualbox doesn't use elementary theme" Tags="|themes|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15140" PostTypeId="2" ParentId="15126" CreationDate="2018-03-19T14:23:51.190" Score="0" Body="&lt;p&gt;Wowbagger, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This question would be hard to answer by anyone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May I suggest that in the future you detail the exact Laptop that you have, and in particular the sound card chipset the that particular laptop that you have uses.&#xA;Not all laptops are the same, right?  And these particular details are pretty important when trying to troubleshoot something like this.&lt;/p&gt;&#xA;" OwnerUserId="4130" LastActivityDate="2018-03-19T14:23:51.190" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15141" PostTypeId="2" ParentId="15110" CreationDate="2018-03-19T14:38:41.343" Score="0" Body="&lt;p&gt;You might find it easier to boot off a partition manager utility, such as &lt;a href=&quot;https://gparted.org/livecd.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;GParted Live&lt;/a&gt;, either the CD / USB version.&lt;br&gt;&#xA;Then delete the existing partitions on the hard drive completely, reboot - and then boot off the Ubuntu installation media.&lt;/p&gt;&#xA;" OwnerUserId="4130" LastActivityDate="2018-03-19T14:38:41.343" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15143" PostTypeId="2" ParentId="12054" CreationDate="2018-03-19T14:54:20.773" Score="0" Body="&lt;p&gt;I've always had good luck with using &lt;a href=&quot;https://rufus.akeo.ie/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rufus USB installer&lt;/a&gt;.&lt;br&gt;&#xA; It's extremely easy to use, and many examples are available.&lt;/p&gt;&#xA;" OwnerUserId="4130" LastActivityDate="2018-03-19T14:54:20.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15144" PostTypeId="2" ParentId="6640" CreationDate="2018-03-19T15:07:44.947" Score="1" Body="&lt;p&gt;I would suggest using a partition manager utility such a &lt;a href=&quot;https://gparted.org/livecd.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;GParted Live&lt;/a&gt; (either the CD or USB version), delete all partitions on the hard drive, reboot, and then try installing it clean.&lt;br /&gt;&#xA;If that fails, you could also try using a utility such as &lt;a href=&quot;https://dban.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;DBAN (Darik's Boot and Nuke)&lt;/a&gt; - that will pretty much guarantee complete hard drive, partition, etc. erasure. &lt;br/&gt; Kinda extreme maybe, but I've encountered drives where either the partitions wouldn't remove properly, or there was a problem with the MBR (master boot record), and DBAN solved it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, if DBAN doesn't work.  Get another hard drive / SSD.  &lt;br/&gt; If you have problems after that... well, maybe the RAM is bad.  (generally replaceable).&#xA;&lt;br/&gt; If after all that you're still having problems, then more than likely you're having some other hardware failure, and maybe time to get a new system.&lt;/p&gt;&#xA;" OwnerUserId="4130" LastActivityDate="2018-03-19T15:07:44.947" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15145" PostTypeId="2" ParentId="15136" CreationDate="2018-03-19T15:12:35.563" Score="1" Body="&lt;p&gt;Install elementary tweaks. Then go to the system settings and go to Tweaks. From there there is a terminal section where you can set it to natural copy paste. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-03-19T15:12:35.563" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15146" PostTypeId="1" CreationDate="2018-03-19T16:17:18.560" Score="1" ViewCount="46" Body="&lt;p&gt;When I try update my elementary OS I get these error messages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://http.us.debian.org/debian xenial Release' does not have a Release file.  &#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.  &#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.  &#xA;W: The repository 'http://ppa.launchpad.net/mc3man/xerus-media/ubuntu bionic Release' does not have a Release file.  &#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.  &#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.  &#xA;E: Failed to fetch http://http.us.debian.org/debian/dists/xenial/main/binary-amd64/Packages  404  Not Found [IP: 208.80.154.15 80]  &#xA;E: Failed to fetch http://ppa.launchpad.net/mc3man/xerus-media/ubuntu/dists/bionic/main/binary-amd64/Packages  404  Not Found  &#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Could you help me to fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="14115" LastEditorUserId="16827" LastEditDate="2019-04-30T07:36:06.333" LastActivityDate="2019-04-30T07:36:06.333" Title="The repository 'http://http.us.debian.org/debian xenial Release' does not have a Release file" Tags="|updates|apt|" AnswerCount="0" CommentCount="0" ClosedDate="2019-04-30T07:36:45.203" ContentLicense="CC BY-SA 3.0" />
  <row Id="15147" PostTypeId="2" ParentId="15139" CreationDate="2018-03-19T17:08:46.757" Score="2" Body="&lt;p&gt;This appears to be a known issue with virtualbox on Ubuntu 16.04 LTS based systems:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.virtualbox.org/ticket/17218&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.virtualbox.org/ticket/17218&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the developer's response:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Your system doesn't have minimum Qt version required for our GUI to&#xA;  work, so our fallback Qt library is used instead. Unfortunately it is&#xA;  not integrated with host system so it doesn't pick up theme, fonts,&#xA;  and other custom settings.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You'll have to wait for Ubuntu 18.04 LTS/Elementary OS 5.0 Juno.&lt;/p&gt;&#xA;" OwnerUserId="14116" LastEditorUserId="7492" LastEditDate="2018-03-19T17:14:53.413" LastActivityDate="2018-03-19T17:14:53.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15149" PostTypeId="2" ParentId="14461" CreationDate="2018-03-19T23:33:35.863" Score="0" Body="&lt;p&gt;You can try installing Eddy (via AppCentre). Eddy is a program to help you install .deb packages through a graphical user interface.&lt;/p&gt;&#xA;" OwnerUserId="14119" LastEditorUserId="8203" LastEditDate="2018-03-27T10:28:39.447" LastActivityDate="2018-03-27T10:28:39.447" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15151" PostTypeId="1" AcceptedAnswerId="15160" CreationDate="2018-03-20T05:53:26.250" Score="2" ViewCount="206" Body="&lt;p&gt;When I connect to my speakers via bluethooth (listening to music through them) and adjust the volume on my laptop, it adjust the volume for the internal laptop speakers and not the bluetooth connected ones. Then I manually go to settings and select the bluetooth connected speakers and only then does it adjust the vlolume fro them. &#xA;Is there a way to make elementary os automatically recognize when they are connected so I can adjust the volume immediately without having to go to settings every time?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="13072" LastActivityDate="2018-03-21T13:46:24.350" Title="Bluetooth connceted speakers - volume not adjusting" Tags="|bluetooth|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15153" PostTypeId="1" AcceptedAnswerId="15163" CreationDate="2018-03-20T13:47:35.870" Score="0" ViewCount="816" Body="&lt;p&gt;Gala has this &lt;a href=&quot;https://github.com/donadigo/gala-pip-plugin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/donadigo/gala-pip-plugin&lt;/a&gt; plugin by default. How do I use/activate it?&lt;/p&gt;&#xA;" OwnerUserId="8308" LastActivityDate="2018-03-21T15:21:01.490" Title="How do I use gala picture in picture plugin?" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15155" PostTypeId="1" CreationDate="2018-03-20T20:21:14.387" Score="0" ViewCount="532" Body="&lt;p&gt;I've been having quite the issue with getting 0.4.1 loki running on my razer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The log in screen loads just fine, but after I input my password I see a fizz of static and the machine freezes. I have to do a hard reboot. I can get to a terminal from log in screen, and have checked drivers, tried using nouveau and nvidia drivers, no luck. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has an Intel Core i7 7500U kaby lake with intel HD graphics 620 if that helps. I have found other users with this same problem, but no solutions that work for me.&lt;/p&gt;&#xA;" OwnerUserId="14130" LastActivityDate="2019-04-17T17:01:25.223" Title="elementaryOS freezes after login -- new razer blade stealth 13.3&quot;" Tags="|release-loki|greeter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15158" PostTypeId="1" CreationDate="2018-03-21T06:16:50.223" Score="0" ViewCount="125" Body="&lt;p&gt;I do not know how to create symbolic links in elementary OS Loki, and my attempts have resulted in errors. (I've tried drag drop and the context menu to no avail).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I notice that Drag &amp;amp; drop defaults to Copy instead of giving the menu option. I also tried Thunar's &quot;Send To&quot; which appears to crash the system. I don't feel comfortable using the terminal, so I wish to do this using the GUI if possible.&lt;/p&gt;&#xA;" OwnerUserId="14133" LastEditorUserId="37" LastEditDate="2018-03-27T10:28:18.783" LastActivityDate="2018-04-27T14:34:44.730" Title="No symbolic links in Loki?" Tags="|folder|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15160" PostTypeId="2" ParentId="15151" CreationDate="2018-03-21T13:46:24.350" Score="4" Body="&lt;p&gt;I found an older post regarding this situation for Ubuntu 15.04 and a bug report that was filed for it. That can be found here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1404729&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/indicator-sound/+bug/1404729&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to duplicate your issue using a set of Bluetooth headphones but was unable to do so and do not have a wireless speaker to try out but I think the resolution put forth in the bug report would be worth a try and can always be undone easily. It involves adding some lines to a Pulse Audio file using a text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can open a Terminal window and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/pulse/default.pa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once the file is open in Scratch, add the following two lines to the bottom of the file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# automatically switch to newly-connected devices&#xA;load-module module-switch-on-connect&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you've added the two lines, close Scratch to save the file. I would then reboot, connect the Bluetooth speaker, then test the volume to see if you've got it solved. I would also disconnect the Bluetooth speaker and verify you're able to adjust the volume on the internal speaker(s).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck and please reply back as to whether or not this was successful.&lt;/p&gt;&#xA;" OwnerUserId="13440" LastActivityDate="2018-03-21T13:46:24.350" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15162" PostTypeId="2" ParentId="15158" CreationDate="2018-03-21T14:48:53.993" Score="1" Body="&lt;p&gt;In the &lt;strong&gt;Files&lt;/strong&gt; application built-in to EOS it's actually really easy:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Drag and drop the file / folder on top of itself (you will see a &lt;code&gt;?&lt;/code&gt; instead of the usual drag icon)&lt;/li&gt;&#xA;&lt;li&gt;A context menu will show with &lt;code&gt;link here&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Then a symlink will be created in the same folder&lt;/li&gt;&#xA;&lt;li&gt;Now drag that wherever you like!&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This definitely works in Loki, I've just done it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The parent Distro, Ubuntu seems to also support this with middle click. Do you have a three button mouse? - I'm using a touchpad so I can't test:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;GUI   You can easily create a symbolic link to a folder or file by&#xA;  middle clicking on the folder with the mouse and dragging it to its&#xA;  new location, while holding the middle mouse button.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhak.blogspot.co.uk/2013/04/symbolic-links-in-ubuntu.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhak.blogspot.co.uk/2013/04/symbolic-links-in-ubuntu.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise you'll need to use the command line probably.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2018-03-21T14:48:53.993" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15163" PostTypeId="2" ParentId="15153" CreationDate="2018-03-21T15:21:01.490" Score="1" Body="&lt;p&gt;I'm not actually sure if Gala is updated on elementary OS Loki, so if the following steps don't work you might need to build gala from source to get the latest version.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;When you press the combination of &lt;strong&gt;Windows+D&lt;/strong&gt; (windows key is also known as super) your cursor will turn into a &lt;code&gt;+&lt;/code&gt; sign.&lt;br&gt;&#xA;In that mode you can click and drag a blue box with the contents that you want to see in the popup window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;resize&lt;/strong&gt; the window, go to the bottom right of the popup window, press the icon that appears and drag the window as you please.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;close&lt;/strong&gt; it, go to the top left corner of the popup and click on the X button that appears.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-21T15:21:01.490" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15164" PostTypeId="2" ParentId="15155" CreationDate="2018-03-21T15:22:25.610" Score="1" Body="&lt;p&gt;I have a kby lake chipset, although on a Dell XPS 13, and it works fine for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First try &lt;code&gt;sudo dpkg-reconfigure lightdm&lt;/code&gt; and try again &lt;code&gt;sudo service lightdm restart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did also upgrade the kernel (and you can try the ubuntu hwe - hardware enablement kernel as a first option - you can do it with apt), I did also install the kbl specific firware from Intel (you can tell it's worked when you upgrade kernel because there is no missing kbl firmware logged). You can also try &lt;code&gt;fwupdmgr&lt;/code&gt; in terminal to see if there are any firmware updates available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia drivers should not work, as it's intel graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The intel stuff is here: &lt;a href=&quot;https://01.org/linuxgraphics/downloads/firmware&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://01.org/linuxgraphics/downloads/firmware&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They also have &quot;recipes&quot; on the site which suggest version of packages for a good intel Graphics stack. Can be worth trying.&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2018-03-21T15:22:25.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15166" PostTypeId="2" ParentId="14441" CreationDate="2018-03-21T19:04:47.987" Score="-1" Body="&lt;p&gt;I have changed by editing the /usr/share/applications/org.pantheon.files.desktop file, as changed the &quot;Icon=system-file-manager&quot; to point to the icon or picture location. &quot;Icon=/location/to/picture/ico&quot;&lt;/p&gt;&#xA;" OwnerUserId="14140" LastActivityDate="2018-03-21T19:04:47.987" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15168" PostTypeId="1" AcceptedAnswerId="15295" CreationDate="2018-03-22T12:41:20.207" Score="0" ViewCount="117" Body="&lt;p&gt;I've updated my kernel recently and that got Ethernet support all messed up (meaning: the hardware was saw by the system, but I couldn't connect to any network). I fixed that by including the parameters on /etc/network/interfaces:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;auto enp3s0&#xA;iface enp3s0 inet dhcp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That got the Ethernet working again after a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the GUI isn't showing this, as you can see in my screenshot. It says the connection has failed and it doesn't recognize the connection, even though I'm using it right now to post this.&lt;a href=&quot;https://i.stack.imgur.com/UDMXI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UDMXI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm willing to bet that I have to inform some config file about the enp3s0 being my Ethernet port, but I don't have any idea which file would that be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone has an idea, it'd be very appreciated.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastEditorUserId="12051" LastEditDate="2018-03-22T13:00:52.833" LastActivityDate="2018-04-06T15:58:41.027" Title="Ethernet isn't show correctly on GUI" Tags="|networking|kernel|user-interface|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15171" PostTypeId="1" AcceptedAnswerId="15172" CreationDate="2018-03-23T03:46:17.243" Score="1" ViewCount="1827" Body="&lt;p&gt;I get the following while trying to run updates ...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;╭─rkm@Latitude-E6230 ~  &#xA;╰─➤  sudo apt-get upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;After this operation, 0 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] Y&#xA;Setting up pantheon-terminal (0.4.3+r1069+pkg51~daily~ubuntu16.04.1) &#xA;...&#xA;update-alternatives: error: alternative path &#xA;/usr/bin/io.elementary.terminal doesn't exist&#xA;dpkg: error processing package pantheon-terminal (--configure):&#xA; subprocess installed post-installation script returned error exit &#xA;status 2&#xA;Errors were encountered while processing:&#xA; pantheon-terminal&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;How can I resolve this ?&lt;/p&gt;&#xA;" OwnerUserId="12521" LastActivityDate="2018-03-23T06:03:24.857" Title="How do I resolve an error updating pantheon-terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15172" PostTypeId="2" ParentId="15171" CreationDate="2018-03-23T03:57:14.830" Score="2" Body="&lt;p&gt;try this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove --purge pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;i think the problem was in daily build, so you should disable before reinstall&lt;/p&gt;&#xA;" OwnerUserId="14154" LastEditorUserId="14154" LastEditDate="2018-03-23T04:18:19.203" LastActivityDate="2018-03-23T04:18:19.203" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15174" PostTypeId="2" ParentId="10430" CreationDate="2018-03-23T10:31:58.280" Score="1" Body="&lt;p&gt;I think you need to change the following value in your &lt;code&gt;*.desktop&lt;/code&gt; file in the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can add icon to the Application Menu, which is in left side of the top panel, manual or with the help of some program.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;With program &quot;AppEditor&quot;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Cv6ZT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Cv6ZT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;with this program you can easily edit &lt;code&gt;*.desktop&lt;/code&gt; files.&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;For DOWNLOAD click here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Manual&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;We need to download 'gksu' for running a graphical application with administrative rights. It will prompt and ask for password when we will try to launch the application shortcut. We can install it with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that we need to create a &lt;code&gt;.desktop&lt;/code&gt; file. We can do that in two locations.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Local within user account: &lt;code&gt;~/.local/share/applications/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;For all users: &lt;code&gt;/usr/share/applications/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;In the file we need to write some properties and the values. Here a example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=XAMPP&#xA;Comment=XAMPP control panel&#xA;Type=Application&#xA;Icon=/opt/lampp/htdocs/favicon.ico&#xA;Exec=gksudo /opt/lampp/manager-linux-x64.run&#xA;Terminal=false&#xA;NoDisplay=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After creating the file we need to give it the correct permissions, permissions to execute it. We can do that by going to the one of the two locations first we had to determine.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;cd ~/.local/share/applications/&lt;/code&gt;&#xA;or&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cd /usr/share/applications/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After that we can give the created file the permissions like this, change the &lt;code&gt;&amp;lt;name&amp;gt;&lt;/code&gt; completely with the file name:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x &amp;lt;name&amp;gt;.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in our example that would be&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x xampp.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14153" LastEditorUserId="14153" LastEditDate="2018-03-23T10:38:20.317" LastActivityDate="2018-03-23T10:38:20.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15175" PostTypeId="1" AcceptedAnswerId="15367" CreationDate="2018-03-23T13:03:13.930" Score="0" ViewCount="395" Body="&lt;p&gt;I just can't find terminal after shutdown. It was lost from wingpanel, bottom quickpanel. Hotkeys also does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If i try to install pantheon-terminal, it's return:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DXWMG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DXWMG.jpg&quot; alt=&quot;error while install pantheon-terminal&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, help =(&lt;/p&gt;&#xA;" OwnerUserId="14160" LastEditorDisplayName="user170" LastEditDate="2018-04-16T14:12:15.767" LastActivityDate="2018-04-16T22:38:04.810" Title="Pantheon-terminal is not installed and cannot install it" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15176" PostTypeId="2" ParentId="15175" CreationDate="2018-03-23T15:15:00.183" Score="-1" Body="&lt;p&gt;Temporary use another terminal you can install it from AppCenter&#xA;For now there is no solution for this problem :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPD: remove daily repo from sources.list and update the system &lt;/p&gt;&#xA;" OwnerUserId="14156" LastEditorUserId="14156" LastEditDate="2018-04-16T12:36:47.770" LastActivityDate="2018-04-16T12:36:47.770" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15177" PostTypeId="1" CreationDate="2018-03-23T17:03:30.210" Score="2" ViewCount="1581" Body="&lt;p&gt;I am just wondering when the new elementaryOS based on Ubuntu 18.04 LTS will be released, as LTS will be soon available and I am looking to upgrade. I want to make sure I choose correctly as I will be using it for the next 2 years.&lt;/p&gt;&#xA;" OwnerUserId="14163" LastEditorUserId="84" LastEditDate="2018-05-05T22:53:20.570" LastActivityDate="2019-04-08T22:01:35.297" Title="When will elementaryOS based on 18.04 LTS be released?" Tags="|release-juno|" AnswerCount="1" CommentCount="3" ClosedDate="2019-04-16T14:30:26.090" ContentLicense="CC BY-SA 4.0" />
  <row Id="15179" PostTypeId="1" CreationDate="2018-03-23T19:14:24.353" Score="2" ViewCount="2041" Body="&lt;p&gt;…and if so, is it possible to choose the application update channel in AppCenter?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu 18.04 will support these features, will elementary OS include it in 5.0 version? &lt;/p&gt;&#xA;" OwnerUserId="14166" LastEditorUserId="308" LastEditDate="2018-08-07T17:02:30.270" LastActivityDate="2018-11-06T09:00:18.593" Title="Does elementary OS support snap packages from AppCenter?" Tags="|updates|applications|apps|camera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15180" PostTypeId="1" CreationDate="2018-03-24T11:38:42.447" Score="1" ViewCount="2760" Body="&lt;p&gt;I need to use a shortcut in order to enter the Euro symbol:  &lt;kbd&gt;€&lt;/kbd&gt; like &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;E&lt;/kbd&gt; in windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do you suggest?&lt;/p&gt;&#xA;" OwnerUserId="14171" LastEditorUserId="14940" LastEditDate="2018-12-06T06:41:56.133" LastActivityDate="2018-12-06T06:41:56.133" Title="How do I enter the Euro Symbol €" Tags="|keyboard|keyboard-shortcuts|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15182" PostTypeId="2" ParentId="15180" CreationDate="2018-03-24T13:01:00.923" Score="2" Body="&lt;p&gt;It's easy! Just press the right Alt and the &quot;E&quot; key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;AltGr&lt;/kbd&gt; + &lt;kbd&gt;e&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user8124" LastActivityDate="2018-03-24T13:01:00.923" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15186" PostTypeId="1" AcceptedAnswerId="15189" CreationDate="2018-03-25T19:49:52.147" Score="0" ViewCount="180" Body="&lt;p&gt;I want to by an amazon kindle paperwhite 2015 and I'm not sure it will work fine. Does anyone have one, can you connect it and upload pdfs or mobis on it without problems? I've searched the ubuntu forums, but I could not find a conclusive answer.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-03-25T22:27:25.997" Title="Does anyone have a kindle?" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15189" PostTypeId="2" ParentId="15186" CreationDate="2018-03-25T22:27:25.997" Score="0" Body="&lt;p&gt;I have a kindle, the last model that came out. The basic one, not the paperwhite, and it works well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have 2 options to manage your library:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A) You can plug your kindle like any other USB and copy/paste your files inside the documents folder of the kindle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;B) You can install &lt;a href=&quot;https://calibre-ebook.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;calibre&lt;/code&gt;&lt;/a&gt;, an ebook manager that let's you convert books to a different format, edit metadata and organize your library.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-03-25T22:27:25.997" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15190" PostTypeId="1" AcceptedAnswerId="15232" CreationDate="2018-03-26T01:00:19.550" Score="0" ViewCount="123" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Es7k3.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Es7k3.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&#xA;In the wingpanel, the sound indicator icon is disabled (with an x in front of the speaker icon), even if I unmute/raise the volume up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;alsamixer is working fine and recognizes my devices and audio card.&lt;/p&gt;&#xA;" OwnerUserId="8711" LastEditorUserId="8711" LastEditDate="2018-03-26T01:22:40.277" LastActivityDate="2018-03-30T05:23:57.433" Title="Loki: Sound settings is not recognizing my audio devices, alsamixer is" Tags="|release-loki|indicator-sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15192" PostTypeId="1" AcceptedAnswerId="15213" CreationDate="2018-03-26T11:36:55.160" Score="0" ViewCount="207" Body="&lt;p&gt;I use a nightly version of Thunderbird. Which means I have to use my own Desktop file if I want it to work properly (and not mess up everything).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It currently looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=Thunderbird Daily&#xA;GenericName=Mail Client&#xA;Comment=Mails, Calendars and Chat&#xA;TryExec=thunderbird&#xA;Exec=thunderbird --class=Daily %U&#xA;Icon=thunderbird&#xA;Type=Application&#xA;Categories=GNOME;GTK;Network;Email;&#xA;Keywords=GPG;PGP;XMPP;Jabber;Task;Todo;IMAP;POP;SMTP;Newsgroup;E-Mail;Mail;&#xA;MimeType=text/plain;text/eml;text/calendar;application/rss+xml;x-scheme-handler/mailto;x-scheme-handler/irc;x-scheme-handler/xmpp;x-scheme-handler/webcal;message/rfc822;x-scheme-handler/news;x-scheme-handler/snews;x-scheme-handler/nntp;x-scheme-handler/feed;&#xA;StartupNotify=true&#xA;StartupWMClass=Daily&#xA;Terminal=false&#xA;X-GNOME-UsesNotifications=true&#xA;X-MultipleArgs=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It used to have a lot more categories and I also tried just specifying &lt;code&gt;x-scheme-handler/mailto&lt;/code&gt; like pantheon mail does, to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The desktop file is in my .local/share/applications folder, where I have other desktop files. I can select Thunderbird Daily as my default Calendar application. Or even text editor, should maybe remove that text/plain...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further, desktop-file-validate has no issues with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yet I can not select Thunderbird Daily as my default mail application, only pantheon mail is available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on 0.4.1 Loki with the settings app at version  2.3.0&lt;/p&gt;&#xA;" OwnerUserId="14190" LastEditorUserId="14190" LastEditDate="2018-03-27T07:46:18.630" LastActivityDate="2018-03-28T16:30:26.317" Title="Can't get custom e-mail client to show up in default application selector" Tags="|settings|mimetype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15193" PostTypeId="1" CreationDate="2018-03-26T12:31:17.163" Score="1" ViewCount="3916" Body="&lt;p&gt;I would like to set the elementary OS lock screen back. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a miss installation of unity and when a came back by uninstalling it I found the regular login screen again:&lt;br&gt;&#xA;(Regular elementary OS login screen (1)) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/roZ0o.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/roZ0o.jpg&quot; alt=&quot;elementary os login screen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I lock my session I have a different screen layout :&lt;br&gt;&#xA;(Different lock screen (2))  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4AoYJ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4AoYJ.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that this has to do with &quot;gnome-screensaver&quot; that is now active and wasn't before.&#xA;I tried uninstalling the screen-saver, but that makes me unable to unlock the session when locked. The login windows disappears but no other login possibility is then available. I have to shut down and reboot to login again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone an idea how to make the regular elementary login screen (1) coming up when locking the session ?&lt;/p&gt;&#xA;" OwnerUserId="14129" LastEditorUserId="16827" LastEditDate="2019-04-13T08:50:42.147" LastActivityDate="2020-07-14T17:33:08.130" Title="elementary OS lock screen configuration" Tags="|release-loki|session|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15194" PostTypeId="2" ParentId="14565" CreationDate="2018-03-26T13:37:51.983" Score="0" Body="&lt;p&gt;Since I do not have enough reputation to add a comment to pop's answer, but still believe it belongs to the question, i put it in a new answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have that dialog, but it seems that in the file save dialog that then comes up, i have no submit button and therefore cannot confirm the file destination. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iaLsk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iaLsk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I actually have the same problem when i save something from firefox. So it probably is not a mail problem only.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Update: Answer&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;So, it seems that I had been having some overwrite settings on my gsettings. I might have had that since I was playing with some hidpi tool. The solution was for me to put:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DialogsUseHeader': &amp;lt;0&amp;gt;, 'Gtk/ShellShowsAppMenu': &amp;lt;0&amp;gt;, 'Gtk/DecorationLayout': &amp;lt;'close:menu,maximize'&amp;gt;}&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&#xA;Michael&lt;/p&gt;&#xA;" OwnerUserId="14192" LastEditorUserId="14192" LastEditDate="2018-05-06T09:00:55.010" LastActivityDate="2018-05-06T09:00:55.010" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15196" PostTypeId="1" AcceptedAnswerId="15204" CreationDate="2018-03-26T19:14:22.993" Score="0" ViewCount="342" Body="&lt;p&gt;So I previously used dual-boot and had windows and linux running but decided to switch to only Linux (elementary OS). The unallocated space was from deleting the partition for my windows. I am now having trouble to resize my &lt;em&gt;/dev/sda5&lt;/em&gt; partition. I am trying to completely allocate the 88.51GB to my &lt;em&gt;/dev/sda5&lt;/em&gt; partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jNTdW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jNTdW.png&quot; alt=&quot;Image of Partition&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/7WkQ4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7WkQ4.png&quot; alt=&quot;Attempt to resize Partition&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13955" LastEditorUserId="16827" LastEditDate="2019-04-13T17:13:10.270" LastActivityDate="2019-04-13T17:13:10.270" Title="Partition Issue (Using unallocated space)- GParted" Tags="|dual-boot|disk-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15197" PostTypeId="1" AcceptedAnswerId="15669" CreationDate="2018-03-26T20:57:34.333" Score="2" ViewCount="1933" Body="&lt;p&gt;I am currently running of EOS in a virtual machine using VirtualBox on Windows. It has been working fine for a while, but this morning a little while after updating via the Appcenter, the GUI stopped working and just has a black screen with a blinking cursor in the upper left. I am able to log in using the TTY1 screen (terminal only) and that seems to work just fine. Rebooting doesn't resolve the issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running the &lt;code&gt;startx&lt;/code&gt; command doesn't seem to do anything. The screen just blinks and goes back to the terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also ran these commands: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove --purge libxfont1&#xA;sudo apt-get install libxfont1 xorg&#xA;sudo rm ~/.Xauthority&#xA;reboot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No change came from those either. I ran &lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt; to no avail. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also ran: &lt;code&gt;sudo apt-get install --reinstall xorg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally I ran &lt;code&gt;sudo apt autoremove&lt;/code&gt; and that didn't resolve the issue either. &lt;/p&gt;&#xA;" OwnerUserId="14196" LastActivityDate="2018-06-01T16:04:17.083" Title="Can't start GUI in Elementary OS Loki 0.4.1" Tags="|desktop|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="15200" PostTypeId="1" AcceptedAnswerId="15205" CreationDate="2018-03-27T11:50:09.213" Score="1" ViewCount="101" Body="&lt;p&gt;I have elementary os loki installed. I've installed a mac os theme, as i like how it does look and changed the layout of the buttons to mac os from the settings. Now, for some reasons, i have some really big buttons here and there in the tilte bar. Take a look:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/M4gog.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/M4gog.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See the big search buttons? Same situation for the extract button in the archive manager... Maybe someone can help?&lt;/p&gt;&#xA;" OwnerUserId="14201" LastActivityDate="2018-03-27T12:52:46.577" Title="Too big window buttons!" Tags="|release-loki|pantheon|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15201" PostTypeId="1" CreationDate="2018-03-27T12:24:45.627" Score="0" ViewCount="330" Body="&lt;p&gt;So I did a dual boot on my Macbook Air, or at least I thought. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I partitioned the hard-drive and used Etcher to install Elementary from a flash drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation went well, except I cannot boot back into Mac OS; I tried using Grub to do it but nothing loads at start up to give me the option of either OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is anything I can do I would be so happy and grateful, this has me so frustrated and I was up til the wee hours of the morning trying to fix it. If anyone can help I would appreciate it greatly!&lt;/p&gt;&#xA;" OwnerUserId="14202" LastActivityDate="2019-04-24T13:03:05.567" Title="dual boot mac OS problems" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15203" PostTypeId="2" ParentId="15180" CreationDate="2018-03-27T12:46:41.900" Score="0" Body="&lt;p&gt;It depends on the keyboard layout you're using.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;US International with dead keys&quot; for example uses &lt;kbd&gt;Alt Gr&lt;/kbd&gt; + &lt;kbd&gt;5&lt;/kbd&gt;, while &quot;US alternative international&quot; uses &lt;kbd&gt;Alt Gr&lt;/kbd&gt; + &lt;kbd&gt;e&lt;/kbd&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other layouts might have other shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="14940" LastEditDate="2018-12-06T06:41:53.543" LastActivityDate="2018-12-06T06:41:53.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15204" PostTypeId="2" ParentId="15196" CreationDate="2018-03-27T12:50:24.960" Score="2" Body="&lt;p&gt;You can't change the partition you're currently using. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try resizing the partition using a live USB.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2018-03-27T12:50:24.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15205" PostTypeId="2" ParentId="15200" CreationDate="2018-03-27T12:52:46.577" Score="1" Body="&lt;p&gt;You're using a GTK theme that's not created for elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way to fix this is to change back the GTK theme to the default theme (or one that does support elementary OS), or to ask the creator of the theme if he/she wants to add support for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2018-03-27T12:52:46.577" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15206" PostTypeId="2" ParentId="13557" CreationDate="2018-03-27T15:01:23.010" Score="0" Body="&lt;p&gt;I found this answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal, and type &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nmcli radio wifi on (uncertain if it is an upper or lower case 'N' to be used)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, add that line on /etc/rc.local file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not tested it as my Litebook had a user on it already that held admin privileges and I was unable to change the text of any of the system files. I ended up downloading the elementary OS from the company website and reinstalling it to get rid of the phantom admin and the wifi works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The touchpad on the other hand....&lt;/p&gt;&#xA;" OwnerUserId="14204" LastActivityDate="2018-03-27T15:01:23.010" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15207" PostTypeId="2" ParentId="13116" CreationDate="2018-03-27T16:22:28.580" Score="2" Body="&lt;p&gt;You got the first part right, the name of the command for overview according to &lt;a href=&quot;http://eos-snippets.blogspot.com/2014/09/terminal-commands-to-initiate-gala.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this post&lt;/a&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply replace your second command with the action like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1'&quot;&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14206" LastActivityDate="2018-03-27T16:22:28.580" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15208" PostTypeId="2" ParentId="15180" CreationDate="2018-03-27T22:40:46.157" Score="2" Body="&lt;p&gt;Press and hold compose key (see Keyboard settings), press &lt;kbd&gt;c&lt;/kbd&gt; and then &lt;kbd&gt;=&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-03-27T22:40:46.157" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15209" PostTypeId="1" AcceptedAnswerId="15276" CreationDate="2018-03-28T03:46:38.003" Score="0" ViewCount="33" Body="&lt;p&gt;I had the following configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An Apache VirtualHost record&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;VirtualHost *:80&amp;gt;&#xA;    DocumentRoot /var/www/test/public&#xA;    ServerName test.dev&#xA;&#xA;    &amp;lt;Directory /var/www/test/public&amp;gt;&#xA;            AllowOverride All&#xA;            Options +FollowSymLinks +Indexes&#xA;            Order allow,deny&#xA;            Allow from all&#xA;    &amp;lt;/Directory&amp;gt;&#xA;&amp;lt;/VirtualHost&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This line in the hosts file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;127.0.0.1        test.dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And when I access the site with typing &lt;code&gt;http://test.dev&lt;/code&gt; on Firefox. It used to work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However recently when I try to access the site with the same URL, it keeps redirecting me to SSL (&lt;code&gt;https://test.dev&lt;/code&gt;) for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I commented out both the VirtualHost record and host file record. But still the browser keeps redirecting it to SSL. So I thought it's a problem in Firefox. Then I did these:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Changed Firefox's &lt;code&gt;browser.urlbar.autoFill&lt;/code&gt; to &lt;code&gt;false&lt;/code&gt; in &lt;code&gt;about:config&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Cleared the whole browser history related to that particular site.&lt;/li&gt;&#xA;&lt;li&gt;Restarted Firefox in safe mode.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But there was no difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also checked in the &lt;code&gt;SiteSecurityServiceState.txt&lt;/code&gt; file in browser profile directory to find the site domain name listed there but it wasn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally I installed Chromium and checked (wish I did it before all the above Firefoxy things) and it gave me the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the both browsers redirects to SSL for no reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a while I changed the domain name in &lt;code&gt;VirtualHost&lt;/code&gt; record and in the host file to &lt;code&gt;test.d&lt;/code&gt; and suddenly the site starts working normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the conclusion is, when there is &lt;code&gt;.dev&lt;/code&gt; extension in the domain name, it redirects to SSL.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need to know why this is happening? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What sits between the browser and the &lt;code&gt;hosts&lt;/code&gt; file so that I can check this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is not a huge problem on my side. But I would like to have the knowledge if someone willing to provide. Thanks..!&lt;/p&gt;&#xA;" OwnerDisplayName="user14208" LastActivityDate="2018-04-04T16:29:33.740" Title="Is there a reason for the web browsers to redirect to https when domain name ends with .dev?" Tags="|web-browser|" AnswerCount="1" CommentCount="1" ClosedDate="2018-04-04T16:29:38.763" ContentLicense="CC BY-SA 3.0" />
  <row Id="15210" PostTypeId="1" AcceptedAnswerId="15419" CreationDate="2018-03-28T04:25:29.713" Score="2" ViewCount="1568" Body="&lt;p&gt;since yesterday, I have no pantheon-terminal any more (elementary OS  0.4.1 Loki). Trying to install it yields this error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=C sudo apt install pantheon-terminal&#xA;...&#xA;pantheon-terminal is already the newest version (0.4.3+r1069+pkg51~daily~ubuntu16.04.1).&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;...&#xA;update-alternatives: error: alternative path /usr/bin/io.elementary.terminal doesn't exist&#xA;dpkg: error processing package pantheon-terminal (--configure):&#xA; subprocess installed post-installation script returned error exit status 2&#xA;Errors were encountered while processing:&#xA; pantheon-terminal&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or when trying to &lt;code&gt;--reinstall&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;LANG=C sudo apt install --reinstall pantheon-terminal&#xA;...&#xA;1 not fully installed or removed.&#xA;...&#xA;E: Internal Error, No file name for pantheon-terminal:amd64&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt install -f&lt;/code&gt; doesn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's wrong here? Thanks for any suggestions...&lt;/p&gt;&#xA;" OwnerUserId="11738" LastActivityDate="2018-04-23T23:44:24.437" Title="update-alternatives: error: alternative path /usr/bin/io.elementary.terminal doesn't exist" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15212" PostTypeId="2" ParentId="15201" CreationDate="2018-03-28T11:45:04.403" Score="1" Body="&lt;p&gt;Start the MacBook with the Option (⌥) key pressed. The disk selection menu should appear shortly after you turn it on. You can then release the Option (⌥) key and select the appropriate disk on which the macOS is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://support.apple.com/en-us/HT201255&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.apple.com/en-us/HT201255&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12029" LastActivityDate="2018-03-28T11:45:04.403" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15213" PostTypeId="2" ParentId="15192" CreationDate="2018-03-28T16:24:39.777" Score="0" Body="&lt;p&gt;Manually forcing an update (i.e. editing) &lt;code&gt;mimeinfo.cache&lt;/code&gt; and &lt;code&gt;mimeapps.list&lt;/code&gt; in &lt;code&gt;~/.local/share/applications&lt;/code&gt; solved this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The proper way to do it would be to execute &lt;code&gt;update-mime-database&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14190" LastEditorUserId="14190" LastEditDate="2018-03-28T16:30:26.317" LastActivityDate="2018-03-28T16:30:26.317" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15214" PostTypeId="1" CreationDate="2018-03-28T17:11:59.360" Score="0" ViewCount="109" Body="&lt;p&gt;Hello I just installed elementay OS and I am running into a problem when using touchpad. My mouse point is shaky when I am using touchpad. My laptop is Dell Inspiron 3000.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not work: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8413/shaky-mouse-pointer-when-using-touchpad&quot;&gt;Shaky mouse pointer when using touchpad&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14216" LastEditorUserId="308" LastEditDate="2019-12-19T19:30:38.400" LastActivityDate="2023-12-29T12:02:15.260" Title="Mouse pointer bounces around when using touchpad" Tags="|mouse|dell|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15215" PostTypeId="1" AcceptedAnswerId="15218" CreationDate="2018-03-28T17:47:45.887" Score="5" ViewCount="15433" Body="&lt;p&gt;I'm new with elementary, and actually I don't find the way to minimize a windows, I only see a button to close a window and one to change the size. How can I minimize a window?&lt;/p&gt;&#xA;" OwnerUserId="14217" LastEditorUserId="84" LastEditDate="2018-05-05T20:45:44.090" LastActivityDate="2021-07-26T18:32:28.913" Title="How to minimize a window?" Tags="|window-management|user-interface|minimize|" AnswerCount="6" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15216" PostTypeId="2" ParentId="15215" CreationDate="2018-03-28T18:52:57.027" Score="5" Body="&lt;p&gt;First, welcome to elementary OS! Hope you've found a Linux home!!!&lt;/p&gt;&#xA;&lt;p&gt;To my knowledge, there are three different ways you are able to minimize a window. Two are available to a user right out of the box and the third is done via installing elementary Tweaks.&lt;/p&gt;&#xA;&lt;p&gt;Here is a rundown of each:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;s&gt;You can place your mouse over the title bar of any window and right click then select minimize.&lt;/s&gt; (not in eOS 5.1)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Any active window can be minimized by using a keyboard shortcut. With elementary OS, it is Super Key (that's the Windows Key on PC or the Command Key on an Apple product) plus the letter 'H'. So, Super + H will do it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You can install an app called elementary Tweaks that will allow you to alter the layout of the window controls. Here is how you can do that and I'm taking it for granted that you're using the newest release of elementary, 0.4.1 Loki. Here are the install instructions:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;First, open Terminal. At the command prompt type each of the commands in this order:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You will need to enter your Admin password. This is the passwrod you use to log into elementary.&lt;/p&gt;&#xA;&lt;p&gt;Now, enter these three commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This adds the repository to pull the software from. After this is done you will update your repositories then install the app by the following two commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once elementary Tweaks is installed, you can find it by opening System Settings. It will be in the topmost area called Personal.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KCKX7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KCKX7.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;One you open Tweaks, within the Appearance section you will see a section called Windows Controls. Click the pulldown and select the control layout that best suits your needs.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nKn9P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nKn9P.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;That's it! The process to install Tweaks is quite quick and there are other adjustments you can do using the app. In most cases, experienced Linux users install this in eOS as a standard step when they install the OS.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps you out and Good Luck!&lt;/p&gt;&#xA;" OwnerUserId="13440" LastEditorUserId="23634" LastEditorDisplayName="user170" LastEditDate="2020-08-08T23:15:03.340" LastActivityDate="2020-08-08T23:15:03.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15217" PostTypeId="2" ParentId="15214" CreationDate="2018-03-28T19:14:40.550" Score="0" Body="&lt;p&gt;Try this:&lt;br&gt;&#xA;Go to the app called &quot;System Settings&quot;, then go to the option &quot;Displays&quot; at the hardware section.&#xA;If you see a display called &quot;Unknown Display&quot; you can try to disable it and then click on the button Apply. &#xA;Maybe this can solve your problem.&lt;/p&gt;&#xA;" OwnerUserId="14218" LastEditorUserId="14218" LastEditDate="2018-03-28T19:29:58.400" LastActivityDate="2018-03-28T19:29:58.400" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15218" PostTypeId="2" ParentId="15215" CreationDate="2018-03-28T19:27:21.690" Score="4" Body="&lt;p&gt;You can also set a hot-corner to achieve this in the Desktop settings. Then, all you have to do is point the mouse to the corner and the window will minimize. As you can see below, mine is set to minimize with the low right corner of the screen. It's surprisingly effective.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XkIDc.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XkIDc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And, as a elementary os user for two years now, I can relate to your pain. Not having ordinary minimize controls for windows don't make any design sense, but sometimes the crave for being different just for the sake of being different gets in the way of the e0S team and this is the result. Thankfully, is easily fixeable with Elementary Tweaks.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-03-28T19:27:21.690" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15221" PostTypeId="2" ParentId="15210" CreationDate="2018-03-29T09:58:56.560" Score="0" Body="&lt;p&gt;As a quick work around until the package is fixed you can disable the post installation script:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/var/lib/dpkg/info/pantheon-terminal.postinst&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Comment out the if block&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh -e&#xA;set -e&#xA;#if [ &quot;$1&quot; = &quot;configure&quot; ]; then&#xA;#       update-alternatives --install /usr/bin/x-terminal-emulator \&#xA;        x-terminal-emulator /usr/bin/io.elementary.terminal 35&#xA;#fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install and change back.&lt;/p&gt;&#xA;" OwnerUserId="14223" LastActivityDate="2018-03-29T09:58:56.560" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15222" PostTypeId="1" CreationDate="2018-03-29T11:01:56.580" Score="1" ViewCount="82" Body="&lt;p&gt;Firstly, I can't save translations, the button states that I don't have the required privileges. Above it says &quot;There is currently no active translator for this translation, please consider becoming a translator as your suggestion might otherwise remain unreviewed&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I become reviewer/coordinator(?) for my selected localisation language?&lt;/p&gt;&#xA;" OwnerUserId="14224" LastEditorUserId="8203" LastEditDate="2018-04-06T06:18:56.977" LastActivityDate="2018-04-06T06:18:56.977" Title="Translating Elementary @Weblate issues" Tags="|translation|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 3.0" />
  <row Id="15225" PostTypeId="1" CreationDate="2018-03-29T15:38:23.810" Score="0" ViewCount="130" Body="&lt;p&gt;Weblate says I do not have permissions to translate. And the pt-br project is without active translators, and it is useless to send suggestions as they will not be seen.&lt;/p&gt;&#xA;" OwnerUserId="14227" LastEditorUserId="26" LastEditDate="2018-04-04T19:38:47.707" LastActivityDate="2019-04-30T09:03:05.717" Title="How do I translate elementary applications on Weblate?" Tags="|translation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15227" PostTypeId="1" CreationDate="2018-03-29T16:47:53.660" Score="0" ViewCount="114" Body="&lt;p&gt;I'm fairly new to Elementary, so I'm still having problems every once in a while.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's been a couple of weeks since I downloaded OS updates the last time, but the App center has ceased to work properly ever since...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the notification that comes out every time I try to fetch new updates:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E: &lt;a href=&quot;http://packages.elementary.io/appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter&lt;/a&gt; xenial/main DEP-11 64x64 Icons is not (yet) available (Could not open file /var/lib/apt/lists/partial/packages.elementary.io_appcenter_dists_xenial_main_dep11_icons-64x64.tar.gz - open (13: Permission denied) [IP: 104.28.4.44 80])&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody help me to fix the bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="14228" LastActivityDate="2018-05-14T15:52:59.603" Title="Problems fetching OS updates (App center seemingly not working the right way...)" Tags="|apps|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15229" PostTypeId="2" ParentId="7036" CreationDate="2018-03-29T21:24:17.237" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-datetime/pull/53&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; there seems to be a pull request ready to be added to the codebase. I don't know what's left for this to be included in next release. Hope this helps&lt;/p&gt;&#xA;" OwnerUserId="4486" LastActivityDate="2018-03-29T21:24:17.237" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15231" PostTypeId="1" CreationDate="2018-03-30T00:38:35.890" Score="0" ViewCount="220" Body="&lt;p&gt;I keep running into problems with the Terminal package from the Elementary OS daily builds repository. I can't seem to install updates from a previous version of Terminal nor reinstall Terminal from scratch with the daily builds repository. If I remove the repository and purge the terminal package, I'm successfully able to install the old version of Terminal, but I'd like to test and try out the latest daily build version to see what progress is being made etc. Perhaps there is a better venue to give feedback on malfunctioning daily build packages?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7DJKF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7DJKF.png&quot; alt=&quot;AppCenter Can&amp;#39;t Install Terminal Error&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/k57fU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k57fU.png&quot; alt=&quot;AppCenter Terminal Install Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mempy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mempy.png&quot; alt=&quot;Synaptic Package&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/STYRQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/STYRQ.png&quot; alt=&quot;Synaptic Package Specifics from Force Option&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9lmmY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9lmmY.png&quot; alt=&quot;Synaptic Reinstall Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12521" LastEditorUserId="12521" LastEditDate="2018-03-30T03:21:04.893" LastActivityDate="2024-03-30T03:07:15.780" Title="When will Terminal package be fixed in daily builds (It's been almost a week, same error)?" Tags="|appcenter|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 3.0" />
  <row Id="15232" PostTypeId="2" ParentId="15190" CreationDate="2018-03-30T05:23:57.433" Score="0" Body="&lt;p&gt;It was because I mounted my &lt;code&gt;/home&lt;/code&gt; folder at my ntfs partition with default options, and pulseaudio wasn't being able to start because my home folder's owner was root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since &lt;code&gt;chown&lt;/code&gt; didn't work in this case, changed the mount options in &lt;code&gt;/etc/fstab&lt;/code&gt; from this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;defaults 0 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uid:1000,gid:1000,umask:0000 0 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That probably brings me security issues and would give me issues with having other users, but it is working as expected and I am the only user in my computer.&lt;/p&gt;&#xA;" OwnerUserId="8711" LastActivityDate="2018-03-30T05:23:57.433" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15233" PostTypeId="2" ParentId="15231" CreationDate="2018-03-30T06:07:51.953" Score="0" Body="&lt;p&gt;It doesn't install nor downgrade, because the package is jacked. Look at the size of it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LRW7K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LRW7K.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;versus&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RLQc5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RLQc5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Meanwhile, what you can do (as I did) is to manually overwrite all the files from your computer with the ones you extract from an older version that you can download from &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/daily/ubuntu/pool/main/p/pantheon-terminal/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;here&lt;/strong&gt;&lt;/a&gt;. Just be careful to keep the same permissions for the files you're replacing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or, install pantheon-terminal &lt;strong&gt;~daily~ubuntu5.0.1&lt;/strong&gt; over yours.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Answer to your questions ... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1.&lt;/strong&gt; The address I gave you leads directly to the file in question, but the source is the same as yours. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2.&lt;/strong&gt; If I take pantheon-terminal_0.4.3+r1069+pkg51~daily as the newer build for ~ubuntu16.04.1, by &lt;em&gt;old version&lt;/em&gt; I mean an older build for ~ubuntu16.04.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3.&lt;/strong&gt; Since I don't use Eddy because the only time I tried it, it didn't warn of or install the missing dependencies (I use the long tried Gdebi) I can't say for sure. As a general rule, it should retain those permissions. My warning was only for what you'll manually copy with your user account over something installed as root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4.&lt;/strong&gt; If you don't clean your system too often, you might find an older build for what you have already installed in /var/cache/apt/archives/ or go afresh with another version.&lt;/p&gt;&#xA;" OwnerUserId="12760" LastEditorUserId="12760" LastEditDate="2018-03-30T14:35:15.670" LastActivityDate="2018-03-30T14:35:15.670" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15234" PostTypeId="1" AcceptedAnswerId="15236" CreationDate="2018-03-30T09:15:09.937" Score="1" ViewCount="1887" Body="&lt;p&gt;I can't update my installation anymore and I have no idea what I've done to it. I keep getting &lt;a href=&quot;https://pastebin.com/KcAJnjvk&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; errors every time I attempt to update my installation using the AppCentre or trying updating my package lists. I've tried all the solutions suggested on the other posts with no success. &lt;/p&gt;&#xA;" OwnerUserId="14215" LastActivityDate="2020-12-15T13:12:44.337" Title="AppCentre fails to fetch updates; sudo apt update gives several errors" Tags="|release-loki|updates|repositories|software-sources|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15235" PostTypeId="2" ParentId="14636" CreationDate="2018-03-30T10:22:21.623" Score="3" Body="&lt;p&gt;Just install &lt;code&gt;libreoffice-style-elementary&lt;/code&gt; from the distro repositories. You don’t need to uninstall your distro-packaged LibreOffice for the version downloadable from libreoffice.org. After you install this package, the icon theme will be selectable from Tools &gt; Options &gt; LibreOffice &gt; View.&lt;/p&gt;&#xA;" OwnerUserId="784" LastActivityDate="2018-03-30T10:22:21.623" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15236" PostTypeId="2" ParentId="15234" CreationDate="2018-03-30T11:11:42.977" Score="4" Body="&lt;p&gt;It looks as though something has replaced the version codename incorrectly in your apt source files (i.e. &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and the other files in &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;)&lt;/p&gt;&#xA;&lt;p&gt;It is likely that some instructions you followed to add a PPA inadvertently caused this, or one of the packages you installed from one of those PPAs did this automatically.&lt;/p&gt;&#xA;&lt;h2&gt;If you are running Juno or Hera (5.0 or 5.1)&lt;/h2&gt;&#xA;&lt;p&gt;You should be able to fix this by replacing all instances of &lt;code&gt;juno&lt;/code&gt; or &lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and all of the files inside &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;h2&gt;If you are running Loki (0.4)&lt;/h2&gt;&#xA;&lt;p&gt;You should be able to fix this by replacing all instances of &lt;code&gt;loki&lt;/code&gt; with &lt;code&gt;xenial&lt;/code&gt; in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and all of the files inside &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Further Information&lt;/h3&gt;&#xA;&lt;p&gt;Where possible, it is recommended to install 3rd party apps like Brave via their Snap packaging format (there's an app called Snaptastic in the AppCenter to help with this). Adding PPAs is essentially giving the owner of that PPA root access to your system, and can lead to issues like this if they are not configured properly.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2020-12-15T13:12:44.337" LastActivityDate="2020-12-15T13:12:44.337" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15238" PostTypeId="2" ParentId="15231" CreationDate="2018-03-30T11:20:47.133" Score="0" Body="&lt;p&gt;The packages in the daily PPA for 16.04 are currently not being actively maintained.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the daily PPA is for testing &lt;strong&gt;development versions&lt;/strong&gt; of elementary apps, and the current development version of elementary is based on 18.04, not a lot of effort is going into maintaining compatibility with 16.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The description of the PPA says it best:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Do NOT install this PPA if you want a tested running system, this PPA contains the newest and most unstable development of elementary, it's useful only if you are a developer and are not afraid to encounter CRITICAL BUGS.&#xA;  Also this PPA may overwrite already installed packages you don't want it to!&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The recommended course of action would be to switch to the stable PPA which has tested, working packages for 16.04, or manually install a working version of terminal as suggested in another answer.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-03-30T11:20:47.133" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15241" PostTypeId="1" CreationDate="2018-03-30T18:46:26.987" Score="0" ViewCount="82" Body="&lt;p&gt;I've installed element OS on my SSD(120GB) and now I'm not able store data in hard drive(1TB)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If tried to mount was getting this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;Error mounting /dev/sda2 at /media/kamalnrf/LENOVO: Command-line `mount -t &quot;ntfs&quot; -o &quot;uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000&quot; &quot;/dev/sda2&quot; &quot;/media/kamalnrf/LENOVO&quot;' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).&#xA;Metadata kept in Windows cache, refused to mount.&#xA;Failed to mount '/dev/sda2': Operation not permitted&#xA;The NTFS partition is in an unsafe state. Please resume and shutdown&#xA;Windows fully (no hibernation or fast restarting), or mount the volume&#xA;read-only with the 'ro' mount option.&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14247" LastActivityDate="2019-08-25T06:02:50.393" Title="Not able to read or write in my HDD" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15242" PostTypeId="1" CreationDate="2018-03-30T19:50:09.173" Score="1" ViewCount="595" Body="&lt;p&gt;I installed updates and after the restart, the screen comes up black with a blinking cursor. I can get to terminal by ctrl-alt-F1 and sign in, but all attempts to troubleshoot have failed. This is disturbing as this is my development environment and I will lose some progress if I do a fresh install. I am running this in a VirtualBox on a Windows 10 computer. It is a Sony VAIO with 12G RAM, Intel Core i7 2Ghz processor. I have run updates and upgrade through the terminal, then rebooted a few times, but this is not working either. Please help!&lt;/p&gt;&#xA;" OwnerUserId="14248" LastActivityDate="2018-03-30T19:50:09.173" Title="Desktop not coming up &amp; black screen after updates" Tags="|updates|boot|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15243" PostTypeId="2" ParentId="15241" CreationDate="2018-03-31T01:32:35.710" Score="1" Body="&lt;p&gt;You can always try to fix the drive. Try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ntfsfix /dev/sdXY&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where &quot;X&quot; is the drive and &quot;Y&quot; is the partition (on an NTFS partition). It should work some magical incantation in the background for you and when it's done you should have a mountable NTFS drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in your case, try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ntfsfix /dev/sda2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if that helps any.&lt;/p&gt;&#xA;" OwnerUserId="14020" LastActivityDate="2018-03-31T01:32:35.710" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15244" PostTypeId="2" ParentId="15227" CreationDate="2018-03-31T02:56:02.703" Score="0" Body="&lt;p&gt;Going based just off of your error message. The contents of that directory are only partially downloaded. [This could be due to apt possibly being interrupted at some point during its last run]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(&lt;strong&gt;warning:&lt;/strong&gt; &lt;em&gt;this can be a very dangerous command if not typed exactly as specified&lt;/em&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should fix your problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/partial/*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then simply try running:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if this helps :)&lt;/p&gt;&#xA;" OwnerUserId="14020" LastEditorUserId="14020" LastEditDate="2018-03-31T03:10:27.703" LastActivityDate="2018-03-31T03:10:27.703" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15245" PostTypeId="1" CreationDate="2018-03-31T12:55:40.757" Score="1" ViewCount="2969" Body="&lt;p&gt;All the time I get &quot;Username or password incorrect&quot;. I have verify again and again this information and it is correct. No mistakes!&lt;/p&gt;&#xA;" OwnerUserId="14256" LastActivityDate="2018-03-31T21:29:13.243" Title="Unable to validate Gmail mail account username or password error" Tags="|settings|" AnswerCount="1" CommentCount="0" ClosedDate="2018-04-04T19:43:47.380" ContentLicense="CC BY-SA 3.0" />
  <row Id="15247" PostTypeId="1" CreationDate="2018-03-31T21:03:28.633" Score="2" ViewCount="1111" Body="&lt;p&gt;I've got a fresh install of Elementary OS, and am unable to connect to wifi. Details below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS Version:&#xA;&lt;code&gt;&#xA;uname -ra&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Linux waynes-world 4.13.0-37-generic #42~16.04.1-Ubuntu SMP Wed Mar 7 16:03:28 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Wireless Card: &#xA;&lt;a href=&quot;https://www.intel.com/content/www/us/en/products/wireless/wireless-products/dual-band-wireless-ac-9260.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Intel AC 9260&lt;/a&gt;&#xA;&lt;code&gt;&#xA;sudo lshw -c network&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network               &#xA;   description: Wireless interface&#xA;   product: Intel Corporation&#xA;   vendor: Intel Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:3b:00.0&#xA;   logical name: wlo1&#xA;   version: 29&#xA;   serial: 74:e5:f9:cb:d8:c9&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=iwlwifi driverversion=4.13.0-37-generic firmware=33.610294.0 latency=0 link=no multicast=yes wireless=IEEE 802.11&#xA;   resources: irq:18 memory:dd300000-dd303fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've install the firmware from here:&#xA;&lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi&quot; rel=&quot;nofollow noreferrer&quot;&gt;Firmware&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restarted NetworkManager:&#xA;&lt;code&gt;&#xA;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wifi still unable to connect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dmesg output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;    [    4.935449] iwlwifi 0000:3b:00.0 wlo1: renamed from wlan0&#xA;    [    5.123798] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready&#xA;    [    5.320809] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready&#xA;    [    5.383457] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready&#xA;    [   70.429230] wlo1: authenticate with f4:f5:e8:72:9a:2f&#xA;    [   70.437808] wlo1: send auth to f4:f5:e8:72:9a:2f (try 1/3)&#xA;    [   70.477826] wlo1: authenticated&#xA;    [   70.480058] wlo1: associate with f4:f5:e8:72:9a:2f (try 1/3)&#xA;    [   70.487897] wlo1: RX AssocResp from f4:f5:e8:72:9a:2f (capab=0x1111 status=0 aid=3)&#xA;    [   70.489798] wlo1: associated&#xA;    [   70.489863] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready&#xA;    [   70.556263] wlo1: Limiting TX power to 27 (30 - 3) dBm as advertised by f4:f5:e8:72:9a:2f&#xA;    [  116.045739] wlo1: deauthenticating from f4:f5:e8:72:9a:2f by local choice (Reason: 3=DEAUTH_LEAVING)&#xA;    [  116.055823] wlo1: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;LOGS:&#xA;&#xA;cat /var/log/syslog&#xA;&#xA;.....&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9260] device (wlo1): Activation: starting connection 'Dragon Age' (dc0b99c7-9229-4b93-9a73-fa2b1b55a7ab)&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9264] audit: op=&quot;connection-activate&quot; uuid=&quot;dc0b99c7-9229-4b93-9a73-fa2b1b55a7ab&quot; name=&quot;Dragon Age&quot; pid=1486 uid=1000 result=&quot;success&quot;&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9268] device (wlo1): state change: disconnected -&gt; prepare (reason 'none') [30 40 0]&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9271] manager: NetworkManager state is now CONNECTING&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9284] device (wlo1): state change: prepare -&gt; config (reason 'none') [40 50 0]&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9289] device (wlo1): Activation: (wifi) access point 'Dragon Age' has security, but secrets are required.&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9290] device (wlo1): state change: config -&gt; need-auth (reason 'none') [50 60 0]&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9411] device (wlo1): state change: need-auth -&gt; prepare (reason 'none') [60 40 0]&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9434] device (wlo1): state change: prepare -&gt; config (reason 'none') [40 50 0]&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9442] device (wlo1): Activation: (wifi) connection 'Dragon Age' has security, and secrets exist.  No new secrets needed.&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9443] Config: added 'ssid' value 'Dragon Age'&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9444] Config: added 'scan_ssid' value '1'&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9445] Config: added 'key_mgmt' value 'WPA-PSK'&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9445] Config: added 'auth_alg' value 'OPEN'&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9446] Config: added 'psk' value ''&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9615] sup-iface[0x979f90,wlo1]: config: set interface ap_scan to 1&#xA;Mar 31 16:58:38 waynes-world NetworkManager[853]:   [1522529918.9768] device (wlo1): supplicant interface state: disconnected -&gt; scanning&#xA;Mar 31 16:58:41 waynes-world wpa_supplicant[1018]: wlo1: SME: Trying to authenticate with f4:f5:e8:72:9a:2f (SSID='Dragon Age' freq=5745 MHz)&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.256149] wlo1: authenticate with f4:f5:e8:72:9a:2f&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.263263] wlo1: send auth to f4:f5:e8:72:9a:2f (try 1/3)&#xA;Mar 31 16:58:41 waynes-world wpa_supplicant[1018]: wlo1: Trying to associate with f4:f5:e8:72:9a:2f (SSID='Dragon Age' freq=5745 MHz)&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.266260] wlo1: authenticated&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.268035] wlo1: associate with f4:f5:e8:72:9a:2f (try 1/3)&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.271759] wlo1: RX AssocResp from f4:f5:e8:72:9a:2f (capab=0x1111 status=0 aid=3)&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6021] device (wlo1): supplicant interface state: scanning -&gt; authenticating&#xA;Mar 31 16:58:41 waynes-world wpa_supplicant[1018]: wlo1: Associated with f4:f5:e8:72:9a:2f&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.273585] wlo1: associated&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6105] device (wlo1): supplicant interface state: authenticating -&gt; associating&#xA;Mar 31 16:58:41 waynes-world wpa_supplicant[1018]: wlo1: WPA: Key negotiation completed with f4:f5:e8:72:9a:2f [PTK=CCMP GTK=CCMP]&#xA;Mar 31 16:58:41 waynes-world wpa_supplicant[1018]: wlo1: CTRL-EVENT-CONNECTED - Connection to f4:f5:e8:72:9a:2f completed [id=0 id_str=]&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6179] device (wlo1): supplicant interface state: associating -&gt; 4-way handshake&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6212] device (wlo1): supplicant interface state: 4-way handshake -&gt; completed&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6212] device (wlo1): Activation: (wifi) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'Dragon Age'.&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6213] device (wlo1): state change: config -&gt; ip-config (reason 'none') [50 70 0]&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6217] dhcp4 (wlo1): activation: beginning transaction (timeout in 45 seconds)&#xA;Mar 31 16:58:41 waynes-world NetworkManager[853]:   [1522529921.6236] dhcp4 (wlo1): dhclient started with pid 1957&#xA;Mar 31 16:58:41 waynes-world gnome-session[1198]: (nm-applet:1471): nm-applet-CRITICAL **: get_menu_item_for_ap: assertion 'dup_data.hash != NULL' failed&#xA;Mar 31 16:58:41 waynes-world kernel: [  273.316744] wlo1: Limiting TX power to 27 (30 - 3) dBm as advertised by f4:f5:e8:72:9a:2f&#xA;Mar 31 16:58:41 waynes-world gnome-session[1198]: message repeated 4 times: [ (nm-applet:1471): nm-applet-CRITICAL **: get_menu_item_for_ap: assertion 'dup_data.hash != NULL' failed]&#xA;Mar 31 16:58:41 waynes-world dhclient[1957]: DHCPDISCOVER on wlo1 to 255.255.255.255 port 67 interval 3 (xid=0x278f93e)&#xA;Mar 31 16:58:43 waynes-world avahi-daemon[851]: Joining mDNS multicast group on interface wlo1.IPv6 with address fe80::3e11:2f8d:5b45:2b70.&#xA;Mar 31 16:58:43 waynes-world avahi-daemon[851]: New relevant interface wlo1.IPv6 for mDNS.&#xA;Mar 31 16:58:43 waynes-world avahi-daemon[851]: Registering new address record for fe80::3e11:2f8d:5b45:2b70 on wlo1.*.&#xA;Mar 31 16:58:45 waynes-world dhclient[1957]: DHCPDISCOVER on wlo1 to 255.255.255.255 port 67 interval 7 (xid=0x278f93e)&#xA;Mar 31 16:58:52 waynes-world dhclient[1957]: DHCPDISCOVER on wlo1 to 255.255.255.255 port 67 interval 12 (xid=0x278f93e)&#xA;Mar 31 16:59:04 waynes-world dhclient[1957]: DHCPDISCOVER on wlo1 to 255.255.255.255 port 67 interval 19 (xid=0x278f93e)&#xA;Mar 31 16:59:23 waynes-world dhclient[1957]: DHCPDISCOVER on wlo1 to 255.255.255.255 port 67 interval 16 (xid=0x278f93e)&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3339] dhcp4 (wlo1): request timed out&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3341] dhcp4 (wlo1): state changed unknown -&gt; timeout&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3666] dhcp4 (wlo1): canceled DHCP transaction, DHCP client pid 1957&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3667] dhcp4 (wlo1): state changed timeout -&gt; done&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3673] device (wlo1): state change: ip-config -&gt; failed (reason 'ip-config-unavailable') [70 120 5]&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3675] manager: NetworkManager state is now DISCONNECTED&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3686] device (wlo1): Activation: failed for connection 'Dragon Age'&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3695] device (wlo1): state change: failed -&gt; disconnected (reason 'none') [120 30 0]&#xA;Mar 31 16:59:27 waynes-world avahi-daemon[851]: Withdrawing address record for fe80::3e11:2f8d:5b45:2b70 on wlo1.&#xA;Mar 31 16:59:27 waynes-world avahi-daemon[851]: Leaving mDNS multicast group on interface wlo1.IPv6 with address fe80::3e11:2f8d:5b45:2b70.&#xA;Mar 31 16:59:27 waynes-world avahi-daemon[851]: Interface wlo1.IPv6 no longer relevant for mDNS.&#xA;Mar 31 16:59:27 waynes-world kernel: [  319.045353] wlo1: deauthenticating from f4:f5:e8:72:9a:2f by local choice (Reason: 3=DEAUTH_LEAVING)&#xA;Mar 31 16:59:27 waynes-world kernel: [  319.057913] wlo1: failed to remove key (1, ff:ff:ff:ff:ff:ff) from hardware (-22)&#xA;Mar 31 16:59:27 waynes-world wpa_supplicant[1018]: wlo1: CTRL-EVENT-DISCONNECTED bssid=f4:f5:e8:72:9a:2f reason=3 locally_generated=1&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3887] sup-iface[0x979f90,wlo1]: connection disconnected (reason -3)&#xA;Mar 31 16:59:27 waynes-world NetworkManager[853]:   [1522529967.3888] device (wlo1): supplicant interface state: completed -&gt; disconnected&#xA;Mar 31 16:59:30 waynes-world gnome-session[1198]: (nm-applet:1471): libnm-WARNING **: (nm-access-point.c:285):nm_access_point_connection_valid: runtime check failed: (ap_ssid != NULL)&#xA;&lt;/pre&gt;&#xA;" OwnerUserId="14261" LastEditorUserId="19360" LastEditDate="2019-12-16T03:35:38.870" LastActivityDate="2023-12-25T18:01:05.180" Title="Elementary OS Loki wifi will not connect 2018" Tags="|release-loki|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15248" PostTypeId="2" ParentId="711" CreationDate="2018-03-31T21:18:39.097" Score="3" Body="&lt;p&gt;You can disable the Bluetooth service.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop bluetooth&#xA;sudo systemctl disable bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14262" LastActivityDate="2018-03-31T21:18:39.097" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15249" PostTypeId="2" ParentId="15245" CreationDate="2018-03-31T21:29:13.243" Score="1" Body="&lt;p&gt;This issue you're seeing is likely linked to Google's two-factor authentication. You can either disable two-factor authentication altogether or you can set up an &lt;a href=&quot;https://support.google.com/accounts/answer/185833&quot; rel=&quot;nofollow noreferrer&quot;&gt;app password&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that still doesn't work, you might have to &lt;a href=&quot;https://myaccount.google.com/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;enable less secure apps&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14262" LastActivityDate="2018-03-31T21:29:13.243" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15250" PostTypeId="1" CreationDate="2018-04-01T04:25:58.580" Score="0" ViewCount="210" Body="&lt;p&gt;I followed the instructions here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9605/how-to-install-nvidia-graphics-driver-for-nvidia-820m-on-loki/9609#9609&quot;&gt;How to install nvidia graphics driver for nvidia 820m on loki?&lt;/a&gt; however if I run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo prime-select nvidia&#xA;glxgears &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X Error of failed request:  BadValue (integer parameter out of range for    operation)&#xA;  Major opcode of failed request:  155 (GLX)&#xA;  Minor opcode of failed request:  3 (X_GLXCreateContext)&#xA;  Value in failed request:  0x0&#xA;  Serial number of failed request:  23&#xA;  Current serial number in output stream:  24&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm using a dell xps 15z and &lt;code&gt;lspci | grep 'VGA\|3D'&lt;/code&gt;outputs&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)&#xA;02:00.0 3D controller: NVIDIA Corporation GK107M [GeForce GT 750M] (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've been trying different things for a while and am stumped.&lt;/p&gt;&#xA;" OwnerUserId="14268" LastActivityDate="2024-04-06T04:04:10.470" Title="Nvidia drivers for Loki on an optimus system do not seem to work" Tags="|graphic-drivers|nvidia|laptop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15251" PostTypeId="2" ParentId="13969" CreationDate="2018-04-01T15:00:33.533" Score="4" Body="&lt;p&gt;&lt;code&gt;vmware-workstation&lt;/code&gt; works without problems with the root user, however, it is very annoying to open the terminal to open the program and believe that the icon is useless. I found a way to bypass the problem by clicking on the icon and the program open asking for root password without having to open the terminal.&#xA;First we should open the file that is in&#xA;&lt;code&gt;/usr/share/applications/vmware-workstation.desktop&lt;/code&gt;&#xA;and then modify the line:&#xA;&lt;code&gt;Exec=/usr/bin/vmware %U&lt;/code&gt;&#xA;for:&#xA;&lt;code&gt;Exec=gksudo -k -u root /usr/bin/vmware %U&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt;  You will need to have gksu installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gksu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14270" LastEditorUserId="26" LastEditDate="2018-11-30T20:08:16.470" LastActivityDate="2018-11-30T20:08:16.470" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15256" PostTypeId="1" AcceptedAnswerId="15258" CreationDate="2018-04-02T10:07:28.970" Score="0" ViewCount="3163" Body="&lt;p&gt;I am really new to elementary OS. It's actually been 2 days. I have been a Windows user for years. The app installation process in Linux is completely new to me. I was just wondering how do people know what to write in the terminal for any specific application, or whether they always google it like me.&lt;/p&gt;&#xA;" OwnerUserId="14282" LastEditorUserId="84" LastEditDate="2018-05-03T15:38:01.907" LastActivityDate="2018-05-03T15:38:01.907" Title="How to install packages?" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15257" PostTypeId="2" ParentId="8544" CreationDate="2018-04-02T10:12:29.893" Score="0" Body="&lt;p&gt;Actually, Elementary DOES support Touch, because I'm using it on my Dell Venue Pro with touch support. It doesn't work well in every scenario, but you can use touch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you may be missing some drivers for touch. Lenovo may need different module.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Dell Venue uses two touch sensors provided by Wacom, so they are recognized properly.&lt;/p&gt;&#xA;" OwnerUserId="12629" LastActivityDate="2018-04-02T10:12:29.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15258" PostTypeId="2" ParentId="15256" CreationDate="2018-04-02T10:20:49.587" Score="1" Body="&lt;p&gt;I am pretty sure, they use Google.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, elementary OS introduced AppCenter, you can find it in your Applications menu. AppCenter is capable of automatic discovery of updates for your system and a powerful search feature for Applications you may need.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I.e. elementary does not come with preinstalled Office-like system, so you may want to try LibreOffice. Just open AppCenter,type LibreOffice in the search box and see what happens: &lt;a href=&quot;https://i.stack.imgur.com/C3uVH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C3uVH.png&quot; alt=&quot;AppCenter with search feature&quot;&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, select LibreOffice (it shall install package with all needed dependencies for ready-to-use business toolkit). As you may see you may select different parts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Applications in elementary OS are collected using &lt;strong&gt;packages&lt;/strong&gt;. These packages may have their own dependencies. For example, if there would be a package named &quot;Minecraft&quot;, it would depend on &quot;Java&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks to AppCenter, and APT mechanism you need not to worry if your dependencies will be broken. APT takes care of dependencies automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Google for Debian Manual, where it's perfectly described. elementary is based on Ubuntu, which is based on Debian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, Michal @mjwhodur&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have also &lt;strong&gt;manpages&lt;/strong&gt;, where you can learn about specific commands i.e.:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;man apt&#xA;&#xA;man apt-get&#xA;&#xA;man bash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12629" LastActivityDate="2018-04-02T10:20:49.587" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15261" PostTypeId="1" CreationDate="2018-04-02T18:37:27.560" Score="0" ViewCount="656" Body="&lt;p&gt;Because the SMB1 protocol is outdated, I would like to use the SMB2 or SMB3 protocol to connect from my elementaryos laptop to a samba share on my ubuntu machine. But when I configure min protocol SMB2 the filemanager in elementaryos fails to connect to the server although smbclient works fine on elementaryos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is SMB2 or SMB3 supported by pantheon-files and if not, when will it be supported?&lt;/p&gt;&#xA;" OwnerUserId="14287" LastActivityDate="2024-04-03T21:00:40.080" Title="Pantheon-files can't connect to samba server with min protocol SMB2 or SMB3" Tags="|pantheon-files|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15264" PostTypeId="2" ParentId="15261" CreationDate="2018-04-03T10:35:57.943" Score="0" Body="&lt;p&gt;Is this any help?&#xA;&lt;a href=&quot;https://askubuntu.com/questions/919967/how-to-tell-gigolo-gvfs-to-use-smbv2-for-windows-shares&quot;&gt;https://askubuntu.com/questions/919967/how-to-tell-gigolo-gvfs-to-use-smbv2-for-windows-shares&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like Thunar, Files relies on gvfs and does not get involved with the technicalities of the connection.  Maybe a later version of gvfs (which will be used with  the next release) will improve the situation.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-04-03T10:35:57.943" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15265" PostTypeId="1" AcceptedAnswerId="15278" CreationDate="2018-04-03T11:22:05.843" Score="0" ViewCount="40" Body="&lt;p&gt;I have the keybinding Super + T assigned to Terminal. So, if I press the key binding, Terminal will open. But if it's already open, it will create a new tab and focus on it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a proper way to assign a shortcut to &lt;em&gt;show that already open window and focus on it&lt;/em&gt; instead of &lt;em&gt;create a new instace of that window&lt;/em&gt;?&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2018-04-04T17:10:01.547" Title="Keyboard shortcuts: show already open window instead of opening new one" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15266" PostTypeId="1" AcceptedAnswerId="15272" CreationDate="2018-04-03T14:54:56.127" Score="1" ViewCount="2004" Body="&lt;p&gt;Tried font identifier online but no luck.&#xA;Is it Cousine Regular?&lt;/p&gt;&#xA;" OwnerUserId="14297" LastActivityDate="2018-04-03T23:55:33.087" Title="What is the default font used by the terminal in elementary os?" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15267" PostTypeId="2" ParentId="12296" CreationDate="2018-04-03T15:52:51.063" Score="1" Body="&lt;p&gt;Open a terminal and execute &lt;code&gt;sudo apt install tlp&lt;/code&gt;. That's going to install TLP, a tool that helps with the overheating and powersavings on laptops. You should also update your video drivers with &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; to make sure it overheats the least possible.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-04-03T15:52:51.063" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15268" PostTypeId="1" CreationDate="2018-04-03T16:55:54.750" Score="1" ViewCount="165" Body="&lt;p&gt;I am having some trouble mounting USB thumb drives in elementary.  When I insert a thumb drive, it does not automount (I understand that this is not supported in elementary). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I look for the device to mount it, I can see the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dmesg :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[63954.021157] usb 1-1: new high-speed USB device number 18 using xhci_hcd&#xA;[63954.166776] usb 1-1: New USB device found, idVendor=0930, idProduct=6545&#xA;[63954.166777] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3&#xA;[63954.166778] usb 1-1: Product: DataTraveler 2.0&#xA;[63954.166778] usb 1-1: Manufacturer: Kingston&#xA;[63954.166779] usb 1-1: SerialNumber: C8600088614CEF403A102EB2&#xA;[63954.167491] usb-storage 1-1:1.0: USB Mass Storage device detected&#xA;[63954.167728] scsi host2: usb-storage 1-1:1.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;lsusb :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 004: ID 04f3:24a1 Elan Microelectronics Corp. &#xA;Bus 001 Device 003: ID 0cf3:e301 Atheros Communications, Inc. &#xA;Bus 001 Device 005: ID 0c45:6713 Microdia &#xA;Bus 001 Device 018: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;mount :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)&#xA;proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)&#xA;udev on /dev type devtmpfs (rw,nosuid,relatime,size=16364952k,nr_inodes=4091238,mode=755)&#xA;devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)&#xA;tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=3278444k,mode=755)&#xA;/dev/mapper/elementary--vg-root on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)&#xA;securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)&#xA;tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)&#xA;tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)&#xA;tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)&#xA;cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)&#xA;pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)&#xA;efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)&#xA;cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)&#xA;cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)&#xA;cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)&#xA;cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)&#xA;cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)&#xA;cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)&#xA;cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)&#xA;cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)&#xA;cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)&#xA;cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)&#xA;cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)&#xA;systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=37,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=16491)&#xA;mqueue on /dev/mqueue type mqueue (rw,relatime)&#xA;hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)&#xA;debugfs on /sys/kernel/debug type debugfs (rw,relatime)&#xA;fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)&#xA;configfs on /sys/kernel/config type configfs (rw,relatime)&#xA;/dev/nvme0n1p2 on /boot type ext2 (rw,relatime,block_validity,barrier,user_xattr,acl)&#xA;/dev/nvme0n1p1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)&#xA;binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)&#xA;tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=3278444k,mode=700,uid=1000,gid=1000)&#xA;/home/.ecryptfs/user/.Private on /home/user type ecryptfs (rw,nosuid,nodev,relatime,ecryptfs_fnek_sig=08480028212d3846,ecryptfs_sig=x,ecryptfs_cipher=aes,ecryptfs_key_bytes=16,ecryptfs_unlink_sigs)&#xA;gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)&#xA;tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;tailing /var/log/syslog I see the following when re-inserting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.052423] usb 1-1: new high-speed USB device number 19 using xhci_hcd&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198345] usb 1-1: New USB device found, idVendor=0930, idProduct=6545&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198347] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198347] usb 1-1: Product: DataTraveler 2.0&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198348] usb 1-1: Manufacturer: Kingston&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198349] usb 1-1: SerialNumber: C8600088614CEF403A102EB2&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.199188] usb-storage 1-1:1.0: USB Mass Storage device detected&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.199333] scsi host2: usb-storage 1-1:1.0&#xA;Apr  3 12:43:56 XPS-15-9560 mtp-probe: checking bus 1, device 19: &quot;/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1&quot;&#xA;Apr  3 12:43:56 XPS-15-9560 mtp-probe: bus: 1, device: 19 was not an MTP device&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From /var/log/kern.log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.052423] usb 1-1: new high-speed USB device number 19 using xhci_hcd&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198345] usb 1-1: New USB device found, idVendor=0930, idProduct=6545&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198347] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198347] usb 1-1: Product: DataTraveler 2.0&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198348] usb 1-1: Manufacturer: Kingston&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.198349] usb 1-1: SerialNumber: C8600088614CEF403A102EB2&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.199188] usb-storage 1-1:1.0: USB Mass Storage device detected&#xA;Apr  3 12:43:56 XPS-15-9560 kernel: [64285.199333] scsi host2: usb-storage 1-1:1.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can I perhaps find the device name somewhere in here:&lt;br&gt;&#xA;&lt;code&gt;/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1&lt;/code&gt; ?&lt;br&gt;&#xA;I have looked in there, but it just looks like a mess of files and directories to me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did try installing usbmount as several posters here had suggested, but it does not mount the device either.  I have tried 2 different thumb drives with different formats.  They both work fine on both of my Macs as well.  I am at a loss...&lt;/p&gt;&#xA;" OwnerUserId="14298" LastEditorUserId="16827" LastEditDate="2019-02-06T13:29:57.730" LastActivityDate="2019-02-08T06:49:51.867" Title="How do I find the device name assigned to USB thumb drive?" Tags="|usb|mount|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="15269" PostTypeId="1" CreationDate="2018-04-03T17:17:29.793" Score="1" ViewCount="158" Body="&lt;p&gt;I have 2 monitors hooked up to my 1080. One 24&quot; 1920x1200 and one 2560x1440 with 144hz.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I reboot I have to reapply the settings for the displays. This includes changing the mosaic, the monitors are on the wrong side. The 27&quot; monitor also reverts back to 60hz, although I can set it fine to 144hz manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried a lot of things today, including changing .config/monitors.xml,  xorg.conf and .nvidia-settings-rc. I've also tried running nvidia-settings as sudo, and save the configuration that way, but no luck. From what I can tell, this is a fairly common problem, but none of the answers have worked for me. It seems like Xorg pulls the default window config from a random place when the system boots.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="14299" LastEditorUserId="16827" LastEditDate="2019-02-06T13:25:24.277" LastActivityDate="2019-02-06T13:25:24.277" Title="Display settings lost on reboot" Tags="|display|nvidia|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15271" PostTypeId="2" ParentId="14625" CreationDate="2018-04-03T17:56:19.167" Score="1" Body="&lt;p&gt;or you can install alacarte :) it will help you create shortcuts :)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and after you can find it in Applcations -&gt; Menu&lt;/p&gt;&#xA;" OwnerUserId="14301" LastActivityDate="2018-04-03T17:56:19.167" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15272" PostTypeId="2" ParentId="15266" CreationDate="2018-04-03T23:55:33.087" Score="4" Body="&lt;p&gt;The default font for terminal is &lt;code&gt;Roboto Mono 10&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find all default variables at this repository on github.com :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/default-settings/blob/master/debian/elementary-default-settings.gsettings-override&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/default-settings &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastActivityDate="2018-04-03T23:55:33.087" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15274" PostTypeId="2" ParentId="13709" CreationDate="2018-04-04T03:29:01.283" Score="0" Body="&lt;p&gt;I gave up and anyway I didn't really like Elementary OS, so I installed Antergos OS!!! 1000% better. It is just my opinion, don't take it close to heart!&lt;/p&gt;&#xA;" OwnerUserId="12526" LastActivityDate="2018-04-04T03:29:01.283" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15276" PostTypeId="2" ParentId="15209" CreationDate="2018-04-04T16:29:33.740" Score="0" Body="&lt;p&gt;There is no way to prevent Chrome (&gt;= 63) from using https on &lt;code&gt;.dev&lt;/code&gt; domain names. Google now owns the official &lt;code&gt;.dev&lt;/code&gt; tld and has already stated that they will not remove this functionality. Firefox also does this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The recommendation is to use another tld for development purposes, such as &lt;code&gt;.localhost&lt;/code&gt; or &lt;code&gt;.test&lt;/code&gt;. Personally, I use subdomains of &lt;a href=&quot;http://readme.localtest.me&quot; rel=&quot;nofollow noreferrer&quot;&gt;localtest.me&lt;/a&gt; as they don't require any special setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More information about this update can be found in &lt;a href=&quot;https://ma.ttias.be/chrome-force-dev-domains-https-via-preloaded-hsts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article by Mattias Geniar&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-04-04T16:29:33.740" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15277" PostTypeId="2" ParentId="15001" CreationDate="2018-04-04T17:08:39.893" Score="1" Body="&lt;p&gt;My permanent solution to this is to not have &lt;code&gt;/boot&lt;/code&gt; be a separate partition. This hasn't been necessary for a long time, back when BIOS could only read the first 1024 cylinders on a disk it was important, but not now.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-04-04T17:08:39.893" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15278" PostTypeId="2" ParentId="15265" CreationDate="2018-04-04T17:10:01.547" Score="0" Body="&lt;p&gt;As a Reddit user suggested &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/89npjj/keyboard_shortcuts_show_already_open_window/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, one useful solution is to use &lt;a href=&quot;https://github.com/mkropat/jumpapp&quot; rel=&quot;nofollow noreferrer&quot;&gt;Jumpapp&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastActivityDate="2018-04-04T17:10:01.547" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15280" PostTypeId="2" ParentId="15225" CreationDate="2018-04-04T19:37:22.403" Score="1" Body="&lt;p&gt;Any users should be able to make suggestions within the elementary weblate instance. If you want to be added to the approved list, you should join the ele-l10n chat &lt;a href=&quot;https://elementary.io/get-involved#translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved#translations&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-04-04T19:37:22.403" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15282" PostTypeId="2" ParentId="15180" CreationDate="2018-04-04T22:46:57.723" Score="2" Body="&lt;p&gt;Like @Jeroen said, its depends on keyboard layout. The best way that works with all the keyboards is to use &lt;em&gt;UNICODE&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every known character has its own unicode number. In Linux, you can write it holding &lt;kbd&gt;Ctrl&lt;/kbd&gt; and &lt;kbd&gt;Shift&lt;/kbd&gt; and typing the key &lt;kbd&gt;U&lt;/kbd&gt; followed by the unicode number.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case, &lt;code&gt;€&lt;/code&gt; is known with unicode &lt;code&gt;U20AC&lt;/code&gt;&lt;br/&gt; So press&#xA;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;U&lt;/kbd&gt;, release &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt;, then &lt;kbd&gt;2&lt;/kbd&gt; + &lt;kbd&gt;0&lt;/kbd&gt; + &lt;kbd&gt;a&lt;/kbd&gt; + &lt;kbd&gt;c&lt;/kbd&gt;, to confirm &lt;kbd&gt;space&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info about Unicode numbers: &lt;a href=&quot;https://unicode-table.com/en&quot; rel=&quot;nofollow noreferrer&quot;&gt;Unicode characters&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="565" LastEditorUserId="6165" LastEditDate="2018-04-05T22:52:16.170" LastActivityDate="2018-04-05T22:52:16.170" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15285" PostTypeId="1" AcceptedAnswerId="15286" CreationDate="2018-04-05T15:24:30.550" Score="1" ViewCount="2484" Body="&lt;p&gt;I'm back to elementary after some absence and I hope to keep using it, but I have no big incentive so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After discovering that adding repos was disabled by default, as well as the Ubuntu's &lt;em&gt;Software and Updates&lt;/em&gt; interface, and after repairing that with &lt;code&gt;sudo apt install software-properties-common software-properties-gtk&#xA;&lt;/code&gt;, I have &lt;a href=&quot;https://elementaryos.stackexchange.com/q/15284/170&quot;&gt;this problem&lt;/a&gt; (all sources lack release file), which also entails I guess the fact that the repo I have added for Elementary Tweaks (&lt;code&gt;ppa:philip.scott/elementary-tweaks&lt;/code&gt;) is also affected.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cipeos@cipeos:~$ sudo apt update&#xA;Hit:1 http://fr.archive.ubuntu.com/ubuntu xenial InRelease&#xA;Ign:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki InRelease                                                                        &#xA;Hit:3 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease                                                                               &#xA;Hit:4 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease                                                                           &#xA;Ign:5 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki InRelease                                                                  &#xA;Ign:6 http://packages.elementary.io/appcenter loki InRelease                                  &#xA;Hit:7 http://security.ubuntu.com/ubuntu xenial-security InRelease                                  &#xA;Ign:8 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease              &#xA;Err:9 http://packages.elementary.io/appcenter loki Release                                         &#xA;  404  Not Found [IP: 104.28.4.44 80]&#xA;Hit:10 https://deb.opera.com/opera-stable stable InRelease                   &#xA;Err:11 http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release     &#xA;  404  Not Found&#xA;Err:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release&#xA;  404  Not Found&#xA;Err:13 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic Release&#xA;  404  Not Found&#xA;Reading package lists... Done                                                &#xA;E: The repository 'http://packages.elementary.io/appcenter loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu loki Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;cipeos@cipeos:~$ sudo apt-get install elementary-tweaks&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Unable to locate package elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-04-06T21:42:43.130" LastActivityDate="2018-04-06T21:42:43.130" Title="Cannot install Elementary Tweaks in Loki (no release file for the repo)" Tags="|release-loki|apt|repositories|tweak-tool|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15286" PostTypeId="2" ParentId="15285" CreationDate="2018-04-05T15:51:44.960" Score="1" Body="&lt;p&gt;It is similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/q/15284/170&quot;&gt;my other question&lt;/a&gt; and can be solved in a similar way, but I am not sure it is the same bug (and therefore a duplicate just like that one) or caused by the added repo which writes &lt;strong&gt;bionic&lt;/strong&gt; instead of &lt;strong&gt;xenial&lt;/strong&gt; in the file it creates &lt;code&gt;/etc/apt/sources.list.d/philip_scott-ubuntu-elementary-tweaks-bionic.list&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right click on the Files icon in Plank dock, select New Window As Administrator, go to &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; folder and edit &lt;code&gt;/etc/apt/sources.list.d/philip_scott-ubuntu-elementary-tweaks-bionic.list&lt;/code&gt; by replacing &lt;strong&gt;bionic&lt;/strong&gt; with &lt;strong&gt;xenial&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2018-04-05T15:51:44.960" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15287" PostTypeId="1" AcceptedAnswerId="15296" CreationDate="2018-04-05T16:13:34.373" Score="0" ViewCount="5494" Body="&lt;p&gt;I have a lot of GTK themes that I like and I have saved for use on various gtk desktops, like &lt;a href=&quot;https://github.com/adapta-project/adapta-gtk-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Adapta&lt;/a&gt; and other well-rated ones, but most do not work on Elementary, as stated &lt;a href=&quot;https://elementaryos.stackexchange.com/q/11140/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I see that &lt;a href=&quot;https://www.gnome-look.org/p/1099856/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ant&lt;/a&gt; themes work.&lt;/p&gt;&#xA;&lt;p&gt;Is there some internet resource dedicated to gtk themes for Elementary/Pantheon desktop?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;New answers are welcome even after the a definitive answer is confirmed.&lt;/h2&gt;&#xA;" OwnerDisplayName="user170" LastEditorUserId="-1" LastEditorDisplayName="user170" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-04-17T14:50:52.103" Title="Well-rated gtk themes that work on Loki" Tags="|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15288" PostTypeId="2" ParentId="15250" CreationDate="2018-04-05T18:18:54.910" Score="0" Body="&lt;p&gt;The problem was actually something obvious.  I failed to turn off secure boot correctly.  I always thought it was odd that I never seemed to have to enter the password I set, not realizing I was passing over the spot to do it while booting.  The windows was so small on my screen to barely be legible.  When I did enter the password instead of pressing enter and passing over the prompt the drivers worked.&lt;/p&gt;&#xA;" OwnerUserId="14268" LastActivityDate="2018-04-05T18:18:54.910" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15289" PostTypeId="1" CreationDate="2018-04-05T18:47:23.907" Score="0" ViewCount="73" Body="&lt;p&gt;I have successfully installed elementary OS alongside my primary Windows 8.1. (Laptop - ASUS X202E)&#xA;But there's no option to launch it anywhere. I can only launch my Windows. (I've checked if the OS did not install, but it is installed.) &#xA;Please give some advice on how to fix this issue.&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="14317" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:13.133" LastActivityDate="2019-05-08T10:04:13.133" Title="I have a problem starting elementary OS" Tags="|boot|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15290" PostTypeId="2" ParentId="15289" CreationDate="2018-04-06T11:37:14.707" Score="1" Body="&lt;p&gt;you have to change the boot order in the BIOS.&lt;/p&gt;&#xA;" OwnerUserId="14322" LastActivityDate="2018-04-06T11:37:14.707" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15292" PostTypeId="1" CreationDate="2018-04-06T12:56:16.157" Score="0" ViewCount="935" Body="&lt;p&gt;I have two computers - one with Linux Mint 18.2 (Sonya), and one with Elementary OS 0.4.1 (Loki).  The Mint computer has a shared hard drive, and it has Samba installed to make the drive shareable on the network.  When I installed Elementary OS a couple of weeks ago, I was able to access the shared drive by clicking on &quot;Entire Network&quot; in file manager.  I then saw the Mint computer, clicked on it, and saw the shared folder.  I then had full access to the shared folder from my Elementary OS computer.  I have continued to have access till a couple of days ago, when we had a power failure at the house.  When the power came back on, my Elementary OS could see the Mint computer, but could no longer see the shared folder: &quot;Unable to Mount Folder -- Could not connect to the server for this folder.  Failed to mount Windows share; No such file or directory&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there perhaps a file or two that got corrupted when the power went off and the computer went off at that point?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="14324" LastActivityDate="2024-01-13T06:03:50.413" Title="Shared drive - unable to see from my Elementary OS computer" Tags="|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15293" PostTypeId="1" CreationDate="2018-04-06T13:02:43.937" Score="4" ViewCount="2095" Body="&lt;p&gt;Every so often, I get the following popup in Elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Authentication is required to refresh the system sources&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I enter my SUDO password, but it won't take it.  What password do I use?  Is this just a bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jim&#xA;elementary OS 0.4.1 Loki&lt;/p&gt;&#xA;" OwnerUserId="14324" LastActivityDate="2019-09-26T18:51:13.253" Title="&quot;Authentication is required to refresh the system sources&quot;" Tags="|system|" AnswerCount="4" CommentCount="1" ClosedDate="2019-09-26T19:01:19.193" ContentLicense="CC BY-SA 3.0" />
  <row Id="15294" PostTypeId="2" ParentId="15293" CreationDate="2018-04-06T14:34:35.597" Score="0" Body="&lt;p&gt;I saw the same after installing updates. I performed another reboot and the popup is now gone.&lt;/p&gt;&#xA;" OwnerUserId="14325" LastActivityDate="2018-04-06T14:34:35.597" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15295" PostTypeId="2" ParentId="15168" CreationDate="2018-04-06T15:58:41.027" Score="0" Body="&lt;p&gt;So, I fixed this by myself. What I did was:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, I purged r8168-dkms completely from my system (it was bundled with an older kernel):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge r8168-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this I downloaded the r8168 from Realtek's website. It is a tar file with a autorun.sh on it. Just decompress it into a directory and run the sh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It'll give you SSL errors, but it should install the driver afterwards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, you should blacklist the r8169, which is a open source alternative driver, as far as I can understand:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;blacklist r8169&quot; | sudo tee -a /etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After all this, you can reboot and you should regain Ethernet conectivity. You can run &lt;code&gt;lshw -class network&lt;/code&gt; in order to see if the driver is correctly installed and if the interface is working properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a lot of things about issues with this particular driver on different distros (Ubuntu and Arch based, as far as I could find) and of all things I've tried, this did the trick.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-04-06T15:58:41.027" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15296" PostTypeId="2" ParentId="15287" CreationDate="2018-04-06T16:08:16.760" Score="3" Body="&lt;ul&gt;&#xA;&lt;li&gt;MacOS-Sierra:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cd ~/.themes&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;git clone &lt;a href=&quot;https://github.com/B00merang-Project/macOS-Sierra.git&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/B00merang-Project/macOS-Sierra.git&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Ant-Themes: &lt;a href=&quot;https://www.gnome-look.org/p/1099856/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.gnome-look.org/p/1099856/&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;OSX-Arc- deb &lt;a href=&quot;https://github.com/LinxGem33/OSX-Arc-White/releases/download/v1.4.3/osx-arc-collection_1.4.3_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; - requires &lt;code&gt;sudo apt install gnome-themes-standard-data gnome-themes-standard&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;http://e.ysfl.cn/bbs/forum.php?mod=forumdisplay&amp;amp;fid=41&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://e.ysfl.cn/bbs/forum.php?mod=forumdisplay&amp;amp;fid=41&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OSX-Arc-darker:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zCBJk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zCBJk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;~Edits by cipricus&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Other GTK themes:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Another gtk theme (although not satisfying the exigence of being &quot;well-rated&quot;) - &lt;a href=&quot;http://entornosgnulinux.com/2017/05/02/elementary-theme-eos-milky-para-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;eOS-milky&lt;/a&gt;. Offers transparency but somewhat clunky in other respects (quasi-black color of selection which hides the black text of the file's name).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://nale12.deviantart.com/art/Flattastic-11-03-2014-424913255&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flattastic&lt;/a&gt; GTK theme.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://satya164.deviantart.com/art/Numix-GTK3-theme-360223962&quot; rel=&quot;nofollow noreferrer&quot;&gt;Numix&lt;/a&gt; GTK theme works too. Also, &lt;a href=&quot;https://github.com/aceat64/Numix-Blue&quot; rel=&quot;nofollow noreferrer&quot;&gt;Numix-blue&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Considering icon themes&lt;/strong&gt; (although that's beyond the scope of the question), they are easier to use with elementary than gtk themes, but even so most of them increase a lot the size of the panel icons (and that size is not editable). A set that doesn't do that and shows the same icon size as the default is &lt;strong&gt;ePapirus&lt;/strong&gt;, from the &lt;a href=&quot;https://github.com/PapirusDevelopmentTeam/papirus-icon-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Papirus&lt;/a&gt; suite.&lt;/p&gt;&#xA;" OwnerUserId="13750" LastEditorDisplayName="user170" LastEditDate="2018-04-17T14:50:52.103" LastActivityDate="2018-04-17T14:50:52.103" CommentCount="6" ContentLicense="CC BY-SA 3.0" />
  <row Id="15299" PostTypeId="2" ParentId="1943" CreationDate="2018-04-06T19:57:16.570" Score="1" Body="&lt;p&gt;There's been an open issue about this for awhile:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-datetime/issues/57&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-datetime/issues/57&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer above does not work. But the following method will work for both the date and time formats.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cd /usr/share/locale/[your language]/LC_MESSAGES&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You should see the file datetime-indicator.mo, unless your language is &quot;en&quot;. In that case, you will have to copy the file from another locale, like en_GB:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo cp ../../en_GB/LC_MESSAGES/datetime-indicator.mo .&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then decompile the .mo file with the command:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo msgunfmt datetime-indicator.mo -o datetime-indicator.po&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Open datetime-indicator.po in any text editor, and search for the line&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;msgid &quot;%a, %b %e&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;change the msgstr below that line to any format you like. You can include any text and strftime(3) format strings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to change the time format (for example, to include seconds), look for the line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;msgid &quot;%l:%M %p&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and change the msgstr below that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then rebuild the .mo file with the command:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo msgfmt datetime-indicator.po -o datetime-indicator.mo&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then log out or reboot.&lt;/p&gt;&#xA;" OwnerUserId="14332" LastEditorUserId="14332" LastEditDate="2018-04-29T16:19:31.043" LastActivityDate="2018-04-29T16:19:31.043" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15300" PostTypeId="2" ParentId="15292" CreationDate="2018-04-07T02:06:53.627" Score="0" Body="&lt;p&gt;I ran all updates from the Terminal window, rebooted, and now I can access the shared drive.  Perhaps something had gotten stepped on, and an update fixed it.&lt;/p&gt;&#xA;" OwnerUserId="14324" LastActivityDate="2018-04-07T02:06:53.627" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15301" PostTypeId="2" ParentId="15293" CreationDate="2018-04-07T02:08:58.243" Score="1" Body="&lt;p&gt;I ran all updates from the Terminal window, rebooted, and now I can access the shared drive. Perhaps something had gotten stepped on, and an update fixed it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this has fixed the other issue as well (the &quot;Authentication is required&quot; prompt).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:  The &quot;Authentication is Required to refresh the system sources&quot; window popped up again.  Problem not yet solved.&lt;/p&gt;&#xA;" OwnerUserId="14324" LastEditorUserId="14324" LastEditDate="2018-04-07T15:29:19.353" LastActivityDate="2018-04-07T15:29:19.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15302" PostTypeId="1" CreationDate="2018-04-07T06:14:11.700" Score="1" ViewCount="182" Body="&lt;p&gt;Has anyone gotten steam to show scaled on an HiDPI screen in elemntary os? It should be working in the steam beta client by enabling &quot;Enlarge text and icons based on monitor size&quot; but this does not work for me. I have also tried passing GDK_SCALE=2 but this also does nothing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I should note I had the same issue on Ubuntu 17.10 and 18.04 beta. Is it not working any longer in steam or am I doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="14335" LastActivityDate="2020-01-30T21:55:06.690" Title="Steam on HiDPI screen" Tags="|steam|hidpi|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15304" PostTypeId="1" CreationDate="2018-04-07T10:39:53.323" Score="1" ViewCount="853" Body="&lt;p&gt;I install elementary OS on ThinkPad T480s. Everything works accept modem Fibocom Cat6 L830-EB 4G LTE.&#xA;I install &quot;modem manager gui&quot; and UI shows an error &quot;Modem is not ready for operation. Please wait while modem is being prepared...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Eyzp1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Eyzp1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to do the same on linux mint 18.3 - the modem works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have somebody any idea how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="14337" LastActivityDate="2024-03-17T13:07:21.003" Title="LTE modem Fibocom L830-EB on ThinkPad T480s" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15307" PostTypeId="1" AcceptedAnswerId="15613" CreationDate="2018-04-07T14:52:12.737" Score="0" ViewCount="304" Body="&lt;p&gt;I am using Elementary OS 0.4.1, Evolution for my gmail account. Additional, I use GPG to encrypt my emails I send to my friends.&lt;br&gt;&#xA;I did a reinstall of eOS on my laptop. Please note, I kept my home folder on separate partition than root.&lt;br&gt;&#xA;After reinstall, evolution is not encrypting my email, before sending email it is showing following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Could not create message.&#xA;Because &quot;gpg: using subkey BB84D566 instead of primary key CEF41E5C&#xA;gpg: using PGP trust model&#xA;gpg: This key belongs to us&#xA;gpg: CC461E31: There is no assurance this key belongs to the named user&#xA;gpg: [stdin]: encryption failed: Unusable public key&#xA;&quot;, you may need to select different mail options.&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already given OpenKey Id for the account I am using.&lt;br&gt;&#xA;Please help me out, thanks...&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-05-25T08:53:23.093" Title="Evolution does not encrypt my emails" Tags="|gpg|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15308" PostTypeId="1" CreationDate="2018-04-07T16:48:34.833" Score="0" ViewCount="214" Body="&lt;p&gt;I need this, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;libQtGui.so.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but don't know how to get it....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Yes, I am a primitive user.)&lt;/p&gt;&#xA;" OwnerUserId="14342" LastActivityDate="2019-01-06T13:01:50.343" Title="How do I install this program: libQtGui.so.4" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15310" PostTypeId="2" ParentId="14038" CreationDate="2018-04-08T12:28:17.880" Score="0" Body="&lt;p&gt;How did you installed it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Opera (it's my favorite browser for years) and I installed trhough the official .deb file provided by their website. It even asks you to allow regular updates with the rest of the system and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've never needed to run it by the terminal, it creates the shortcuts by itself flawlessly. Maybe your problem has to do with the method or origin by which you had it installed.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastEditorUserId="12051" LastEditDate="2018-04-08T12:37:35.000" LastActivityDate="2018-04-08T12:37:35.000" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15312" PostTypeId="2" ParentId="8269" CreationDate="2018-04-09T07:19:05.333" Score="0" Body="&lt;p&gt;All of the versions are online at: &lt;a href=&quot;http://osarchive.sda1.eu/elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://osarchive.sda1.eu/elementary-os&lt;/a&gt; (as I just noticed the post above already says)&lt;/p&gt;&#xA;" OwnerUserId="14352" LastEditorUserId="14352" LastEditDate="2018-04-09T07:24:15.910" LastActivityDate="2018-04-09T07:24:15.910" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15313" PostTypeId="2" ParentId="13887" CreationDate="2018-04-09T12:50:34.340" Score="-1" Body="&lt;p&gt;I found that you can also zip the appimage file with the executable permission intact. So after yoh download and unzip you can just run it. &lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2018-04-09T12:50:34.340" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15314" PostTypeId="2" ParentId="14351" CreationDate="2018-04-09T22:37:18.670" Score="1" Body="&lt;p&gt;I had the exact same problem, MacBook Air late 2014.&#xA;On Elementary Os Loki 4.1&#xA;Kernel: 4.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after doing everything exactly the same as you, I ran:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r facetimehd&#xA;sudo modprobe -r bdc_pci&#xA;sudo modprobe facetimehd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And now the camera works perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's here in &quot;additional notes&quot;: &lt;a href=&quot;https://github.com/patjak/bcwc_pcie/wiki/Get-Started#devvideo-not-created&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/patjak/bcwc_pcie/wiki/Get-Started#devvideo-not-created&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14360" LastActivityDate="2018-04-09T22:37:18.670" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15315" PostTypeId="2" ParentId="14622" CreationDate="2018-04-09T23:16:32.427" Score="0" Body="&lt;p&gt;Try killing your running Pantheon Mail instance and launching it with the &lt;code&gt;--debug&lt;/code&gt; option set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill pantheon-mail&#xA;pantheon-mail --debug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you're having the same issue as me, then you should see Pantheon Mail is trying to use the wrong IMAP folders for archiving/trashing mails, and this breaks the UI commands you're trying to use.&#xA;The Online Accounts dialog doesn't offer a &quot;Gmail&quot; provider option (even though Pantheon Mail has &lt;a href=&quot;https://github.com/elementary/mail/tree/bcb67ba5d59582d6d0fdc6b1ebeb50e72fdfb618/src/engine/imap-engine/gmail&quot; rel=&quot;nofollow noreferrer&quot;&gt;code for handling that explicitly&lt;/a&gt;) and thus the configuration for Pantheon Mail ends up being wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found a temporary fix -- I haven't yet found a way to persist this configuration change as it is automatically regenerated.&#xA;Again, make sure Pantheon Mail is not running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkill pantheon-mail&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open the &lt;code&gt;~/.local/share/pantheon-mail/YOURACCOUNT@gmail.com/geary.ini&lt;/code&gt; file, change &lt;code&gt;service_type&lt;/code&gt; from &lt;code&gt;OTHER&lt;/code&gt; to &lt;code&gt;GMAIL&lt;/code&gt;, and save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launch Pantheon Mail again and enjoy your archiving/deletion... until the next login.&lt;/p&gt;&#xA;" OwnerUserId="14361" LastActivityDate="2018-04-09T23:16:32.427" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15317" PostTypeId="2" ParentId="15308" CreationDate="2018-04-10T15:33:03.893" Score="2" Body="&lt;p&gt;you should be able to use the &lt;code&gt;terminal&lt;/code&gt; app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are other questions and answers about how to set sudo password etc. but you should be able to do this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo app-get install libqtgui4&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hopefully that works for you&lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2018-04-10T15:33:03.893" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15321" PostTypeId="1" AcceptedAnswerId="15364" CreationDate="2018-04-10T19:17:54.167" Score="0" ViewCount="3052" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wss1k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wss1k.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This proble affects Opera and Chromium browsers but not Google Chrome and Fitefox; it  has something to do with html5 video streaming, not flash, as it affects live streaming in Youtube. - Only, incidentally, some other internet video doesn't work either, namely Tweeter videos (whether live or not) - but that may be a separate issue.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I am in Loki up-to-date and talking about the following browsers updated at the date of this post:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Opera   52.0.2871.40&#xA;Chromium 49.0.2623&#xA;Firefox 59.0.2&#xA;Google Chrome 65.0.3325.181&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-04-16T07:11:47.753" LastActivityDate="2018-04-18T21:11:10.557" Title="Youtube live video not working in Opera (and Chromium)" Tags="|videos|chromium|opera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15323" PostTypeId="1" CreationDate="2018-04-11T07:14:30.123" Score="2" ViewCount="774" Body="&lt;p&gt;Need to get 0 B/4,464 B of archives.&#xA;After this operation, 16.4 kB of additional disk space will be used.&#xA;Selecting previously unselected package pantheon-terminal.&#xA;(Reading database ... 344254 files and directories currently installed.)&#xA;Preparing to unpack .../pantheon-terminal_0.4.3+r1069+pkg51~daily~ubuntu16.04.1_amd64.deb ...&#xA;Unpacking pantheon-terminal (0.4.3+r1069+pkg51~daily~ubuntu16.04.1) ...&#xA;Processing triggers for man-db (2.7.5-1) ...&#xA;Setting up pantheon-terminal (0.4.3+r1069+pkg51~daily~ubuntu16.04.1) ...&#xA;update-alternatives: error: alternative path /usr/bin/io.elementary.terminal doesn't exist&#xA;dpkg: error processing package pantheon-terminal (--configure):&#xA; subprocess installed post-installation script returned error exit status 2&#xA;Errors were encountered while processing:&#xA; pantheon-terminal&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;" OwnerUserId="14374" LastActivityDate="2018-04-23T23:35:34.597" Title="I'm having this issue with pantheon/terminal" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="15324" PostTypeId="1" AcceptedAnswerId="15326" CreationDate="2018-04-11T07:34:42.497" Score="0" ViewCount="137" Body="&lt;p&gt;I post this in order to provide an answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lately I had problems with gdebi on various systems, where installation seemed to go fine but then the program seemed absent. This never happened when I used the terminal for the same purpose of installing from deb files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can the terminal be used as a full alternative to gdebi? (that is: install on double click etc)&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2018-04-11T07:42:50.610" Title="Light terminal-based alternative to gdebi" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15325" PostTypeId="1" CreationDate="2018-04-11T07:38:16.503" Score="0" ViewCount="70" Body="&lt;p&gt;On the epiphany browser when i watch a video on youtube it start playing OK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I then resize, or move mouse focus off the player or try to use the mouse to re-wind the stream to replay the last bit again the sound continues but I loose the video. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is as if the video is going to the wrong plane on the display output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone else seeing this? Is there a workaround?&lt;/p&gt;&#xA;" OwnerUserId="14376" LastActivityDate="2019-05-08T01:01:25.233" Title="Error on resize or move focus on video play back - no picture sound continues" Tags="|epiphany|video-player|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15326" PostTypeId="2" ParentId="15324" CreationDate="2018-04-11T07:42:50.610" Score="0" Body="&lt;p&gt;After installing &lt;code&gt;gedit&lt;/code&gt; text editor, in order to associate the deb files with an &quot;application&quot;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.local/share/applications/deb_install.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with the lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=[Desktop Entry]&#xA;Icon=gdebi&#xA;MimeType=application/vnd.debian.binary-package;&#xA;Exec=pantheon-terminal -e &quot;sudo dpkg -i %f&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, right click a deb file, select &quot;Open with&quot; - &quot;Other application&quot;, and select &quot;Install deb&quot;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2018-04-11T07:42:50.610" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15328" PostTypeId="2" ParentId="14357" CreationDate="2018-04-11T15:01:36.740" Score="0" Body="&lt;p&gt;What I did to improve mine was dig deep onto TLP configuration file in order to craft a very efficient power profile for my laptop. Now it runs cold, rarely uses more than one CPU core and the battery life is on par to what I'd get on Windows 10. And If I want, I can unleash all power by &lt;code&gt;sudo tlp ac&lt;/code&gt; on Terminal, which puts it in AC mode and knocks the hardware into high gear for gaming or whatever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find the file by &lt;code&gt;sudo scratch-text-editor /etc/default/tlp&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What you'll see is the main config file which TLP reads to enforce its power management into your system. Provided you know what you are doing, you can craft a very power efficient profile out of this at the expense of some processing power, off course.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't know how to edit the TLP config file, I'd strongly advise you to learn more about it first at &lt;a href=&quot;http://linrunner.de/en/tlp/docs/tlp-configuration.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://linrunner.de/en/tlp/docs/tlp-configuration.html&lt;/a&gt; and even then be pretty cautious about what you are doing and changing.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-04-11T15:01:36.740" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15329" PostTypeId="1" AcceptedAnswerId="15333" CreationDate="2018-04-11T15:46:52.923" Score="4" ViewCount="8227" Body="&lt;p&gt;From a lot of time my bluetooth does not work on elementary OS. On Ubuntu is okay, in Windows also, but elementary OS bluetooth icon is always gray even if I switch it on from wingpanel and cannot discover any device. So, I have tried a lot of 'solutions' found by google and finally manage to found devices using &lt;em&gt;blueman&lt;/em&gt;, but still cannot connect to audio devices or make file exchanges.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know which commands I can use in order to reinstall the elementary OS bluetooth packages instead of installing some another apps like &lt;em&gt;blueman&lt;/em&gt;, which do not work good as well?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the output of &lt;code&gt;rfkill list&lt;/code&gt; command is &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;1: hci0: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="16827" LastEditDate="2019-04-13T13:25:24.317" LastActivityDate="2021-06-09T20:18:05.417" Title="Reinstall Bluetooth elementary OS" Tags="|bluetooth|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15330" PostTypeId="2" ParentId="15325" CreationDate="2018-04-11T16:19:49.193" Score="1" Body="&lt;p&gt;That's &lt;a href=&quot;https://bugs.webkit.org/show_bug.cgi?id=183085&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org/show_bug.cgi?id=183085&lt;/a&gt;. The only known solution is to update GStreamer, which seems not very likely to happen in Loki.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2018-04-11T16:19:49.193" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15331" PostTypeId="1" CreationDate="2018-04-11T17:15:23.173" Score="1" ViewCount="25" Body="&lt;p&gt;I have a laptop that I use as a fix PC. I wired it with a cable. When I turn on my PC from standby, on the desktop I only see the mouse, the rest is black, but on the desktop of the laptop it's all normal. Could you help me to resolve this problem:) &lt;/p&gt;&#xA;" OwnerUserId="14378" LastActivityDate="2018-04-11T17:15:23.173" Title="Problem with desktop paring" Tags="|display|desktop|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15333" PostTypeId="2" ParentId="15329" CreationDate="2018-04-11T22:48:16.190" Score="5" Body="&lt;p&gt;First, unblocking solution found &lt;a href=&quot;https://askubuntu.com/questions/688090/cannot-unblock-soft-blocked-bluetooth&quot;&gt;there&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill unblock bluetooth&#xA;systemctl enable bluetooth.service&#xA;systemctl start bluetooth.service&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;afterwords the solution for the bluetooth audio from &lt;a href=&quot;https://askubuntu.com/questions/634382/bluetooth-speaker-pairs-but-wont-connect&quot;&gt;this link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install pulseaudio-module-bluetooth&#xA;pactl load-module module-bluetooth-discover&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then try deleting/removing the device from bluetooth devices and pair it again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;..and I have bluetooth audio working.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2018-04-11T22:48:16.190" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15335" PostTypeId="1" CreationDate="2018-04-12T12:07:22.360" Score="1" ViewCount="528" Body="&lt;p&gt;I have a problem with my gpu driver. I'm new in Linux World and i can't fix it. The problem is when i update gpu driver, system not responding after login screen. Please look at this image and video.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://image.ibb.co/dAOkPx/A7_C97_E67_5149_46_AB_B9_B6_5_AB2_ECB32756.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://image.ibb.co/dAOkPx/A7_C97_E67_5149_46_AB_B9_B6_5_AB2_ECB32756.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://streamable.com/sf9ui&quot; rel=&quot;nofollow noreferrer&quot;&gt;and Video&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have GeForce 7025/630a GPU and AppCenter recommend Nvidia-304 (304.135) driver. But when I install gpu driver os not responding. I m sorry for bad English by the way.&lt;/p&gt;&#xA;" OwnerUserId="14388" LastActivityDate="2019-04-10T05:01:20.233" Title="System Crashed After Gpu Driver Update" Tags="|updates|nvidia|crash|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="15339" PostTypeId="2" ParentId="13844" CreationDate="2018-04-12T21:30:37.617" Score="0" Body="&lt;p&gt;Thank you!! Now my laptop boots so fast, unbelievable :-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At home my laptop is in a docking station with another monitor and I did not notice any problems but now I am somewhere else and I have to use the laptop display and found out that there were a few crashes while booting but your solution works! &#xA;I have changed &lt;code&gt;/etc/grub.d/10_linux&lt;/code&gt; and added the kernel parameter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux&amp;lt;-&amp;gt;${rel_dirname}/${basename} root=${linux_root_device_thisversion} ro video=SVIDEO-1:d ${args}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the &lt;code&gt;grub-mkconfig&lt;/code&gt; puts that parameter at every kernel&lt;/p&gt;&#xA;" OwnerUserId="14393" LastEditorUserId="578" LastEditDate="2018-04-23T05:53:34.780" LastActivityDate="2018-04-23T05:53:34.780" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15344" PostTypeId="2" ParentId="14559" CreationDate="2018-04-13T20:20:27.647" Score="0" Body="&lt;p&gt;Update to kernel 4.15. that solved the problem for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I have a laptop with amd a9 cpu. &lt;/p&gt;&#xA;" OwnerUserId="14405" LastActivityDate="2018-04-13T20:20:27.647" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15345" PostTypeId="2" ParentId="15335" CreationDate="2018-04-14T14:51:06.300" Score="1" Body="&lt;p&gt;You can enter the recovery mode and reset your system settings.&#xA;There are many reasons for this problem. You can edit the Startup menu at the grub interface &lt;code&gt;E&lt;/code&gt;, enter ‘acpi=off’, and then press F10 into the system. If you can see the desktop, please uninstall the graphics driver.&lt;/p&gt;&#xA;" OwnerUserId="13750" LastActivityDate="2018-04-14T14:51:06.300" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15346" PostTypeId="2" ParentId="15085" CreationDate="2018-04-14T14:53:09.913" Score="0" Body="&lt;pre&gt;&lt;code&gt;gsettings reset-recursively org.gnome.desktop.wm.keybindings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dconf reset -f /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13750" LastEditorUserId="16827" LastEditDate="2019-04-16T14:39:43.177" LastActivityDate="2019-04-16T14:39:43.177" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15348" PostTypeId="2" ParentId="3829" CreationDate="2018-04-14T21:35:46.877" Score="-2" Body="&lt;p&gt;For starting it in Terminal, you can use the path to Android-studio's launcher&#xA;filesystem: .../usr/local/android-studio/bin/studio.sh&lt;/p&gt;&#xA;" OwnerUserId="14409" LastEditorUserId="34" LastEditDate="2018-05-09T09:11:22.103" LastActivityDate="2018-05-09T09:11:22.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15349" PostTypeId="1" AcceptedAnswerId="15423" CreationDate="2018-04-14T22:12:26.030" Score="0" ViewCount="107" Body="&lt;p&gt;Is there a way to right align the secondary text on the welcome widget. I have a rather longish secondary text (attached screenshot) and the text will look better if the left margin is aligned rather then the centering of the text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also is there a way to break the text into two paragraphs.&#xA;Here is the code snippet, I use - standard way to create the welcome widget.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Granite.Widgets.Welcome welcome = new Granite.Widgets.Welcome (&#xA;    NuttyApp.Constants.PRIMARY_TEXT_FOR_DISCLAIMER,   &#xA;    NuttyApp.Constants.SECONDARY_TEXT_FOR_DISCLAIMER&#xA;);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The complete code is &lt;a href=&quot;https://github.com/babluboy/nutty/blob/260d8ea4db450af1c297a9f43d99301fb121b241/src/window.vala#L28&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; on GitHub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for the help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AZneQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AZneQ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2018-04-24T15:49:01.193" Title="Left Align the secondary text on Widgets.Welcome" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15354" PostTypeId="2" ParentId="15293" CreationDate="2018-04-15T15:50:00.373" Score="0" Body="&lt;p&gt;Mine returned as well. I reviewed the Other Software tab in Software &amp;amp; Updates and removed the check mark for the freerdp2 repository I had added. Since that time (almost a week now) I have not seen the request for credentials.  Take a look at your entries and try removing the check mark for any that are not default.&lt;/p&gt;&#xA;" OwnerUserId="14419" LastActivityDate="2018-04-15T15:50:00.373" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15355" PostTypeId="1" CreationDate="2018-04-15T17:46:01.817" Score="0" ViewCount="92" Body="&lt;p&gt;elementaryOS will freeze and hang forever when I open Videos, System Settings, and sometimes App Center. I can move the cursor but interaction beyond moving the cursor does not apparently do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS: elementaryOS 0.41 Loki&#xA;Hardware: Intel i5, Nvidia GTX 960 M, Solid State Drive&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Apr 16 00:06:54 michael-N170RD1 anacron[971]: Job `cron.daily' terminated&#xA;Apr 16 00:06:54 michael-N170RD1 anacron[971]: Normal exit (1 job run)&#xA;Apr 16 00:06:57 michael-N170RD1 gnome-session[1133]: (process:1427): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.773575 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Apr 16 00:06:58 michael-N170RD1 gnome-session[1133]: (process:1427): indicator-sound-WARNING **: accounts-service-access.vala:218: unable to sync volume 0.886780 to AccountsService: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: No such interface 'com.ubuntu.AccountsService.Sound'&#xA;Apr 16 00:12:02 michael-N170RD1 kernel: [  618.327007] usb 2-5: reset SuperSpeed USB device number 2 using xhci_hcd&#xA;Apr 16 00:12:02 michael-N170RD1 udisksd[1336]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/ST1000LM024_HN_M101MBB_S318J9BF202682: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)&#xA;Apr 16 00:16:58 michael-N170RD1 systemd[1]: Starting Cleanup of Temporary Directories...&#xA;Apr 16 00:16:58 michael-N170RD1 systemd-tmpfiles[4438]: [/usr/lib/tmpfiles.d/var.conf:14] Duplicate line for path &quot;/var/log&quot;, ignoring.&#xA;Apr 16 00:16:58 michael-N170RD1 systemd[1]: Started Cleanup of Temporary Directories.&#xA;Apr 16 00:17:01 michael-N170RD1 CRON[4441]: (root) CMD (   cd / &amp;amp;&amp;amp; run-parts --report /etc/cron.hourly)&#xA;Apr 16 00:18:08 michael-N170RD1 org.gnome.zeitgeist.SimpleIndexer[1205]: ** (zeitgeist-fts:1519): WARNING **: Unable to get info on application://synapse.desktop&#xA;Apr 16 00:18:08 michael-N170RD1 gnome-session[1133]: Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Apr 16 00:18:08 michael-N170RD1 gnome-session[1133]: (keepassx:4448): Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;,&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14420" LastActivityDate="2019-04-18T15:41:01.297" Title="System Crash, Usually happens when I open an elementaryOS app" Tags="|applications|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15356" PostTypeId="1" CreationDate="2018-04-15T19:30:03.863" Score="0" ViewCount="1448" Body="&lt;p&gt;I tried to install Microsoft Office in Wine; the install worked but all of the apps failed. I tried to remove in Wine, did not uninstall. I remove from the Terminal in the ./wine directory. The ICONS are still in the Applications Menu. How do I get rid of those?&lt;/p&gt;&#xA;" OwnerUserId="12405" LastActivityDate="2018-04-17T07:38:08.073" Title="Remove ICONS from Applications" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15357" PostTypeId="1" AcceptedAnswerId="15362" CreationDate="2018-04-15T20:10:08.897" Score="1" ViewCount="587" Body="&lt;p&gt;I am moving from Mac after 10 years and have chosen to go with Linux for both my desktop and laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I currently have Ubuntu 16.04 running and with a few visual tweaks I really like it. I have seen both Deepin 15.5 and elementary OS and both really appeal to me visually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just wondered if any node.js devs are using either distro and what their thoughts are? Is it a stable env for node development? I am mainly using React front ends with express APIs. But on the side I do like to play with Python3 too. Mongo is my main DB. Any advice or feedback would be awesome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use VS Code on Ubuntu and works fine so I am assuming it would on elementary too? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="14421" LastActivityDate="2018-04-16T09:43:47.963" Title="Is anyone a Node.js developer using elementary OS?" Tags="|software-installation|development|web-development|python|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15359" PostTypeId="2" ParentId="15357" CreationDate="2018-04-15T23:04:59.407" Score="0" Body="&lt;p&gt;While I don't develop with node on elementary. I do develop android using java and kotlin. Being built upon ubuntu 16.04 it's super stable and any apps available on ubuntu are available on elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wouldn't recommend deepin. With the latest release they now track all your activity. &lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-04-15T23:04:59.407" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15361" PostTypeId="2" ParentId="10997" CreationDate="2018-04-16T02:21:47.853" Score="3" Body="&lt;p&gt;I was able to fix this by setting the correct primary monitor via LightDM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;LightDM is elementaryOS's lock screen (aka pantheon-greeter)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;First you need to find the name for your primary monitor using the command &lt;code&gt;xrandr&lt;/code&gt;. It will be something similar to &quot;HDMI1&quot; or &quot;DVI-0&quot;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once you have the correct monitor name you will need to edit the file &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt;. In that file you will need to add the following line: &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;display-setup-script=xrandr --output HDMI-0 --primary&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure the HDMI-0 in the line above is your own monitor name.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart computer&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13867" LastEditorUserId="13867" LastEditDate="2018-04-16T16:53:12.830" LastActivityDate="2018-04-16T16:53:12.830" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15362" PostTypeId="2" ParentId="15357" CreationDate="2018-04-16T09:43:47.963" Score="1" Body="&lt;p&gt;I develop for &lt;code&gt;Node&lt;/code&gt;, and &lt;code&gt;React&lt;/code&gt; using EOS, I use Sublime Text usually, but I have VS Code installed too. I've used that for Golang and opened node projects with it. It works well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The terminal is great, although I still install &lt;code&gt;oh-my-zsh&lt;/code&gt; for the shell. Node itself runs well, and frankly I find open source development tools are great in Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for MongoDB, Postgres and other tools - all work well too. Personally I prefer to run them (for app development) inside docker, so I can keep them isolated, switch local ports, and start and stop the DBs for different projects, as well as easily use whatever versions I like without having to install the OS packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Python 3 I use all the time, as well as 2.7 for one project. I have iPython notebooks running and pretty much anything I used on a Mac I have here too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd say go for it.  &lt;/p&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2018-04-16T09:43:47.963" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15363" PostTypeId="1" AcceptedAnswerId="15574" CreationDate="2018-04-16T10:06:02.787" Score="1" ViewCount="1156" Body="&lt;p&gt;I want to connect to Fritz NAS over smb protocol. In Ubuntu it is easy. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Menu &amp;gt; File &amp;gt; Connect to server &amp;gt; &quot;smb://fritz.box&quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then username and password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I am in. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to do it with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="287" LastEditorUserId="84" LastEditDate="2018-05-18T13:01:47.017" LastActivityDate="2018-05-18T13:01:47.017" Title="How to connect to FritzBox NAS" Tags="|pantheon-files|networking|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15364" PostTypeId="2" ParentId="15321" CreationDate="2018-04-16T11:16:01.070" Score="2" Body="&lt;p&gt;This problem is to be put in the context of browser html5 support, more specifically &lt;strong&gt;support for h264&lt;/strong&gt; streams (which affected much more than Youtube live streams). That seems to be lacking at the date of these posts in both Chromium and Opera but can be solved only separately. &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;For Chromium:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install chromium-codecs-ffmpeg-extra&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which will remove &lt;code&gt;chromium-codecs-ffmpeg&lt;/code&gt; if already installed.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;For Opera:&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to opera://about/ and look for the relevant Chromium version.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jMB5K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jMB5K.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Download from &lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; the  corresponding version of &lt;code&gt;chromium-codecs-ffmpeg-extra&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Extract the archive.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sfMSL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sfMSL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Copy the &lt;code&gt;libffmpeg.so&lt;/code&gt; file (with the file manager as administrator or in terminal) to &lt;code&gt;/usr/lib/x86_64-linux-gnu/opera&lt;/code&gt; replacing the already existing file if needed. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;(This is different from &lt;a href=&quot;https://solus-project.com/forums/viewtopic.php?t=1004&quot; rel=&quot;nofollow noreferrer&quot;&gt;a solution on which it is loosely based&lt;/a&gt;. Location is different and no renaming of the file was done.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was first answered &lt;a href=&quot;https://unix.stackexchange.com/a/438062/32012&quot;&gt;here&lt;/a&gt;, also &lt;a href=&quot;https://unix.stackexchange.com/a/438060/32012&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;libffmpeg.so&lt;/code&gt; file can be also found in the package &lt;code&gt;opera-ffmpeg-codecs&lt;/code&gt; &lt;a href=&quot;https://www.archlinux.org/packages/community/x86_64/opera-ffmpeg-codecs/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://repo.herecura.eu/herecura/x86_64/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, and it can be also put in a new folder &lt;code&gt;/usr/lib/x86_64-linux-gnu/opera/lib_extra/&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;The above may need be repeated depending whether updates replace the &lt;code&gt;libffmpeg.so&lt;/code&gt; file or require a new one corresponding to a newer Chrome version.&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-04-18T21:11:10.557" LastActivityDate="2018-04-18T21:11:10.557" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15366" PostTypeId="1" CreationDate="2018-04-16T22:33:54.367" Score="0" ViewCount="90" Body="&lt;p&gt;I have been reading that Linux in general does not run well on the late 2016 MacBook Pro.  I have been running several distros with minimal problems through the Parallel Desktop Lite app, including Elementary, but when I try to use Epiphany, it THINKS it gives me results, in the ALL category, but nothing is displayed. A blank screen.   Is this the incompatibility of the hardware or is there a way to get Ephiphany or any Gnome browser to work?  Firefox runs fine.&lt;/p&gt;&#xA;" OwnerUserId="14431" LastActivityDate="2019-04-12T22:01:10.210" Title="Epiphany or Gnome Brower not displaying search results on late 2016 Macbook Pro running in virtual machine through Parallel Desktop Lite" Tags="|macbook|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15367" PostTypeId="2" ParentId="15175" CreationDate="2018-04-16T22:38:04.810" Score="2" Body="&lt;p&gt;This only affects people who've added the unstable daily PPA. Don't ever add this PPA on a production system. You will encounter critical bugs while running it. Lots of Loki packages are breaking in daily due to big API breaking changes in Juno. You should purge this PPA and return to the stable software channel.&lt;/p&gt;&#xA;" OwnerUserId="45" LastActivityDate="2018-04-16T22:38:04.810" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15369" PostTypeId="2" ParentId="15356" CreationDate="2018-04-17T07:38:08.073" Score="2" Body="&lt;p&gt;Those icons are .desktop files. You could search for them and delete them manually, but before you do that, install AppEditor from the AppCenter. That should allow you to delete, or at least hide, them from the Launcher menu.&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-04-17T07:38:08.073" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15371" PostTypeId="1" CreationDate="2018-04-17T13:21:07.560" Score="0" ViewCount="230" Body="&lt;p&gt;I connected my earphones on my Laptop and the music played through the earphones. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, when I unplugged the earphones, the speakers did not work at all. I restarted the system, still, the speakers do not work.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The sound only comes through earphones when they are plugged in. When they are plugged out, there is no sound from the speakers. &lt;/p&gt;&#xA;" OwnerUserId="14053" LastActivityDate="2019-09-25T00:42:32.023" Title="I connected my earphones now my speakers do not work" Tags="|sound|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="15372" PostTypeId="2" ParentId="15287" CreationDate="2018-04-17T14:38:58.073" Score="1" Body="&lt;p&gt;I like OSX Buttons. It keeps the same elementary style but with OSX style buttons. You just have to use elementary Tweaks to shift the windows controls to OSX style to the left. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/yarik-vv/OS-X-buttons&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/yarik-vv/OS-X-buttons&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0pUK6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0pUK6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-04-17T14:38:58.073" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="15375" PostTypeId="2" ParentId="15366" CreationDate="2018-04-17T15:21:18.053" Score="2" Body="&lt;p&gt;This was previously reported at &lt;a href=&quot;https://bugzilla.redhat.com/show_bug.cgi?id=1480554&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.redhat.com/show_bug.cgi?id=1480554&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Parallels is probably missing some OpenGL extension expected by WebKit. If you want to debug this further, you're going to have to report a bug upstream, at &lt;a href=&quot;https://bugs.webkit.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.webkit.org/&lt;/a&gt;. Prefix the bug title with [GTK] and select the 'WebKit Gtk' Bugzilla component to make sure it gets seen. Ask for help with debugging the issue. Important: run the 'glxinfo' command within Parallels and paste the output. Also look for any command line warnings that might be printed when running epiphany from the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For a workaround, try running it from the command line with this environment variable set:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ WEBKIT_DISABLE_COMPOSITING_MODE=1 epiphany&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and see if that works.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2018-04-17T15:21:18.053" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15376" PostTypeId="1" CreationDate="2018-04-17T15:25:38.697" Score="0" ViewCount="1320" Body="&lt;p&gt;I am trying to install elementary OS as a dual boot on my new XPS and keep getting a frozen screen on the logo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I escaped the graphical view to look into the terminal and saw a large number of what appear to be errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eDgjQ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eDgjQ.jpg&quot; alt=&quot;Errors here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have now also tried installing straight Ubuntu and I am getting the same behaviour. Stalling on the welcome screen prior to any dialog screens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone steer me in the right direction?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on a brand new Dell XPS 15 with a 220gb partition from my main windows boot drive.&lt;/p&gt;&#xA;" OwnerUserId="14421" LastEditorUserId="14421" LastEditDate="2018-04-17T18:31:18.227" LastActivityDate="2018-04-17T19:20:02.630" Title="elementary install freezing" Tags="|release-loki|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15378" PostTypeId="2" ParentId="15215" CreationDate="2018-04-17T15:36:55.940" Score="2" Body="&lt;p&gt;Beside &lt;strong&gt;shortcuts&lt;/strong&gt;, &lt;strong&gt;hotcorners&lt;/strong&gt; and elementary-tweaks (that adds the &lt;strong&gt;minimize button&lt;/strong&gt;) indicated in the other answers, there are other ways:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A setting is available for the gnome-related desktops (Pantheon used in elementary, also in Budgie and Gnome itself) to &lt;strong&gt;minimize a window on right-clicking its top margin (titlebar)&lt;/strong&gt;. With one terminal command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-right-click-titlebar 'minimize'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In this way you can select in Tweaks to use fewer buttons, possibly only &quot;close&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To roll that back to showing the menu, use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-right-click-titlebar 'menu'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If instead you prefer to use the &lt;strong&gt;middle-click&lt;/strong&gt; for the same purpose:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-middle-click-titlebar 'minimize'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To roll back to the default (which is doing nothing):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences action-middle-click-titlebar 'none'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To see all options available - example for the middle-click setting:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings range org.gnome.desktop.wm.preferences action-right-click-titlebar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Another way to minimize a window is to &lt;strong&gt;click its dock icon&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-04-17T16:12:36.757" LastActivityDate="2018-04-17T16:12:36.757" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15379" PostTypeId="2" ParentId="15355" CreationDate="2018-04-17T17:05:29.327" Score="1" Body="&lt;p&gt;&lt;code&gt;sudo apt-get upgrade&lt;/code&gt; # solved my problems, thanks to everyone who looked at my problem.&lt;/p&gt;&#xA;" OwnerUserId="14420" LastEditorUserId="16827" LastEditDate="2019-04-18T15:41:01.297" LastActivityDate="2019-04-18T15:41:01.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15380" PostTypeId="2" ParentId="15376" CreationDate="2018-04-17T19:20:02.630" Score="1" Body="&lt;p&gt;OK, so thanks to someone that knows what they are actually doing on ask Ubuntu I got my answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is with the dell XPS specifically. You need to enter grub and add acpi_rev_override=1 after quiet splash. This worked a treat for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I take no credit as I didn't find the fix but I hope it helps you if you are stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the thread: &lt;a href=&quot;https://askubuntu.com/questions/1025900/16-04-install-freezing-with-watchdog-bug-soft-lockup-cpu6-stuck-for-22s/1025902#1025902&quot;&gt;https://askubuntu.com/questions/1025900/16-04-install-freezing-with-watchdog-bug-soft-lockup-cpu6-stuck-for-22s/1025902#1025902&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14421" LastActivityDate="2018-04-17T19:20:02.630" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15381" PostTypeId="1" CreationDate="2018-04-17T21:25:42.133" Score="1" ViewCount="46" Body="&lt;p&gt;I have just tried to install elementary as a dual boot alongside windows 10 on my new XPS 15 and it was a bit of a train crash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some issues with Dell specifically, see here - &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15376/elementary-install-freezing&quot;&gt;elementary install freezing&lt;/a&gt; - I managed to get elementary to live load from the USB boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then followed the install instructions and chose &quot;something else&quot; as the install option. I then added a root partition and a swap partition which I had freed up space for earlier on in windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All seemed ok but then when prompted to restart I clicked the restart button and everything just froze. I rebooted several times to have the same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I then tried deleting the partitions from windows. The main partition deleted fine but I could not delete the swap partition so on reboot I kept getting grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a result I am doing a fresh install of windows to start from scratch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The advice I specifically need and would appreciate help with is:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens if I choose 'install along side windows' rather than 'something else'?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get rid of grub and the old partitions? My windows machine has just rebooted and grub again came up during one of the windows reinstall starts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone else successfully got an XPS 15 running elementary alongside windows? &lt;/p&gt;&#xA;" OwnerUserId="14421" LastActivityDate="2018-04-17T21:25:42.133" Title="Messed up my first install, any tips for the next try?" Tags="|system-installation|dual-boot|microsoft-windows|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 3.0" />
  <row Id="15384" PostTypeId="1" CreationDate="2018-04-18T15:18:04.750" Score="0" ViewCount="118" Body="&lt;p&gt;I recently installed bumblebee to set my Nvidia gpu as default for steam.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After reboot the lock screen or any display never came up, so I booted into recovery and purged bumblebee,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon next reboot, I got it to display the lock screen, but now I cannot interact with it in any way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can still use the recovery mode to interact with the root terminal with no issues, and my windows dual boot is working fine as well, so I don't think it has anything to do with the hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any assistance will be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="14449" LastActivityDate="2024-03-19T07:07:20.870" Title="Unable to interact with lockscreen after installing bumble bee" Tags="|display|greeter|input|bumblebee|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15385" PostTypeId="2" ParentId="9907" CreationDate="2018-04-18T17:22:14.217" Score="0" Body="&lt;p&gt;If like me you use zsh :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;change &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;exec bash --login&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;by :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/zsh&#xA;exec zsh --login&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14451" LastActivityDate="2018-04-18T17:22:14.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15386" PostTypeId="1" CreationDate="2018-04-18T19:22:36.420" Score="0" ViewCount="295" Body="&lt;p&gt;Can't download updates.&#xA;In one answer you state that I have to change something in etc......&#xA;How do I get there?&#xA;I am new to Linux, but I had some experience on Puppy Linux.&#xA;Is my software a beta?&#xA;I also installed Pearl Linux for a friend, and I never had any problems with it!&#xA;We used to have a Linux Users Group in Malta, but now it is dormant&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Charles &lt;/p&gt;&#xA;" OwnerUserId="14453" LastEditorUserId="14940" LastEditDate="2018-11-30T19:58:53.343" LastActivityDate="2024-04-04T00:08:10.970" Title="Elementary OS freya - No updates are possible!" Tags="|release-freya|updates|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15387" PostTypeId="2" ParentId="15110" CreationDate="2018-04-18T21:59:50.753" Score="0" Body="&lt;p&gt;You don't actually need to &quot;remove&quot; Ubuntu. Just boot up from a live USB drive with Ubuntu on it and proceed the installation normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just make sure that you install the Ubuntu system in the eOS partition and it's done.&lt;/p&gt;&#xA;" OwnerUserId="12051" LastActivityDate="2018-04-18T21:59:50.753" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15388" PostTypeId="2" ParentId="14134" CreationDate="2018-04-19T06:43:30.173" Score="0" Body="&lt;p&gt;I installed &lt;a href=&quot;https://github.com/skilion/onedrive&quot; rel=&quot;nofollow noreferrer&quot;&gt;OneDrive FreeClient&lt;/a&gt; a few minutes ago as suggested above.&#xA;The Git Hub website is pretty much clear about the path to prepare the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The one step is not that clear is running the OneDrive file (&lt;code&gt;./onedrive&lt;/code&gt;), and after authorizing the app, (click on the URL the app generates and then pasting back on the Terminal the blank page URI) it starts downloading your info.&lt;/p&gt;&#xA;" OwnerUserId="14457" LastActivityDate="2018-04-19T06:43:30.173" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15391" PostTypeId="2" ParentId="15384" CreationDate="2018-04-19T15:05:43.907" Score="0" Body="&lt;p&gt;Just removing all Nvidia drivers through root terminal in recovery fixed the problem&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14449" LastActivityDate="2018-04-19T15:05:43.907" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15393" PostTypeId="2" ParentId="14734" CreationDate="2018-04-19T20:44:55.090" Score="1" Body="&lt;p&gt;So the hidpoint suggestion sent me on an oddessy of trying to install 32bit libraries to run it's xWindows install. BLEH.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Solaar instead and the problem with my mouse buttons was resolved. I get the added benefit of seeing information about the unifying receiver in a graphic interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From your terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install solaar&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this provides you a better working solution.&lt;/p&gt;&#xA;" OwnerUserId="14459" LastEditorUserId="14459" LastEditDate="2018-04-20T12:38:38.537" LastActivityDate="2018-04-20T12:38:38.537" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15394" PostTypeId="1" CreationDate="2018-04-20T07:51:14.507" Score="1" ViewCount="591" Body="&lt;p&gt;I'm having issues with anything considered a &quot;media key&quot; in &lt;code&gt;dconf -&amp;gt; org -&amp;gt; gnome -&amp;gt; settings-daemon -&amp;gt; plugins -&amp;gt; media-keys&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried assigning shortcuts to things like terminal, volume up/down, etc in both &lt;code&gt;dconf&lt;/code&gt; and &lt;code&gt;settings -&amp;gt; keyboard -&amp;gt; shortcuts&lt;/code&gt;. Regardless of the short-cut combination I use, these keys just do not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Loki 0.4.1 on my mid-2015 Macbook Pro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked my key names using &lt;code&gt;sudo xbindkeys -k&lt;/code&gt; and have used these names in dconf. I've also tried simply pressing the key in Elementary's keyboard shortcut settings section. Neither of these work, the shortcuts simply do nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried using the &lt;code&gt;gsettings&lt;/code&gt; commands to change the shortcuts, no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's really quite frustrating, especially for things like volume, screen brightness etc. I'm running the same version of ElementaryOS on my Surface Pro 3 and all media keys work well, so it's just the MBP :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On a side note, the function keys F1-F12 work perfectly when holding &lt;code&gt;fn&lt;/code&gt;, these are the same physical keys as most of the media keys, so the actual keys aren't busted or anything. I've also tried changing the shortcuts for volume down to something basic like Alt+E but the result is the same, volume doesn't change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit: This was resolved in Juno&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="14468" LastEditorUserId="14468" LastEditDate="2018-10-20T02:12:02.970" LastActivityDate="2019-12-12T22:03:49.387" Title="No media key shortcuts working" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="15395" PostTypeId="2" ParentId="15386" CreationDate="2018-04-20T13:22:41.797" Score="0" Body="&lt;p&gt;It is my understanding that the distribution known as elementary OS is still &quot;beta&quot;. Since it is built on Built on Ubuntu it is not as &quot;beta&quot; as some.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current version is elementary OS 0.4.1 Loki Built on &quot;Ubuntu 16.04.3 LTS&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps upgrade is your expected update path at this time. &lt;/p&gt;&#xA;" OwnerUserId="14459" LastActivityDate="2018-04-20T13:22:41.797" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15396" PostTypeId="2" ParentId="4497" CreationDate="2018-04-20T15:13:10.803" Score="1" Body="&lt;p&gt;I have Elementary 0.4.1 on my Surface Pro 3.  Basic features all work well, and support has even been added for trackpad scrolling gestures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have had problems with the wifi dropping after a few minutes of use when using my university network; however, using my home network does not cause this problem.  One other limitation is that the power button will put the surface to sleep, but then it has trouble recovering. After being put to sleep, the surface has trouble recognizing the keyboard and often just requires a full restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Overall though, decent experience.  Elementary looks great.&lt;/p&gt;&#xA;" OwnerUserId="14473" LastEditorUserId="84" LastEditDate="2018-04-23T10:37:24.590" LastActivityDate="2018-04-23T10:37:24.590" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15399" PostTypeId="2" ParentId="15247" CreationDate="2018-04-21T17:33:02.690" Score="0" Body="&lt;p&gt;please type &lt;code&gt;rfkill list&lt;/code&gt;&#xA;you may see somethings like &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: phy0: Wireless LAN&#xA;Soft blocked: no&#xA;Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you got some &lt;code&gt;blocked: yes&lt;/code&gt;  try &lt;code&gt;rfkill unblock all&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you got more then one wireless LAN&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: phy0: Wireless LAN&#xA;Soft blocked: no&#xA;Hard blocked: no&#xA;1: acer-wireless: Wireless LAN&#xA;Soft blocked: no&#xA;Hard blocked: yes​&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;try to blacklist one of them, see &#xA;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/wireless-problem.2316/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?threads/wireless-problem.2316/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/modprobe.d/blacklist.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;add &lt;code&gt;blacklist acer_wmi&lt;/code&gt; as a new line at the bottom of this file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or if you like one-line:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo blacklist acer-wmi | sudo tee -a /etc/modprobe.d/blacklist-acer-wmi.conf​&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14482" LastActivityDate="2018-04-21T17:33:02.690" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15401" PostTypeId="1" AcceptedAnswerId="15405" CreationDate="2018-04-21T19:56:05.360" Score="0" ViewCount="1661" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/a3QaW.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks exactly same as you see in the picture above. I was be able to click to install before, but I can't click it anymore. It says &quot;No components with updates&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may have happened because of me, I closed the AppCenter during the download process.&lt;/p&gt;&#xA;" OwnerUserId="14485" LastEditorUserId="84" LastEditDate="2018-04-23T10:30:58.890" LastActivityDate="2020-12-16T09:27:48.267" Title="AppCenter is not updating the system" Tags="|appcenter|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15403" PostTypeId="1" CreationDate="2018-04-22T00:08:10.950" Score="0" ViewCount="255" Body="&lt;p&gt;How do I turn off the default bluetooth power on at the start of the system?&lt;/p&gt;&#xA;" OwnerUserId="14486" LastActivityDate="2018-04-28T12:14:58.833" Title="How do I turn off the bluetooth at the start of the system?" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15405" PostTypeId="2" ParentId="15401" CreationDate="2018-04-22T08:06:26.650" Score="2" Body="&lt;p&gt;You're probably up to date, closing AppCenter while it's downloading an update probably didn't stop it, it likely finished in the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to double check, you can ensure your system is up to date the &quot;old way&quot; via a couple of terminal commands...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2753" LastEditorUserId="2753" LastEditDate="2018-04-24T08:21:00.650" LastActivityDate="2018-04-24T08:21:00.650" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15406" PostTypeId="2" ParentId="15401" CreationDate="2018-04-22T09:26:54.677" Score="0" Body="&lt;p&gt;elementary is ramping up for a new version, so in all likelihood, they are telling developers to hold off on the upgrades. Meanwhile the Ubuntu LTS it is based on is also getting long in the tooth. You'd need to activate a backports repo to get new upgrades.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just wait for eOS Juno to come out. You will have enough to cope with then.&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-04-22T09:26:54.677" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15408" PostTypeId="2" ParentId="15155" CreationDate="2018-04-22T09:34:58.370" Score="1" Body="&lt;p&gt;I had the same problem on my Gigabyte Sabre 17. Go into your BIOS settings and disable 3d acceleration. &lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-04-22T09:34:58.370" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15411" PostTypeId="2" ParentId="15121" CreationDate="2018-04-22T13:38:38.057" Score="0" Body="&lt;p&gt;I'm not finding &quot;Software and Updates&quot; anywhere on my Loki system, but you can use Settings | Repositories&quot; in Synaptic or you can just edit the repo list manually&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-04-22T13:38:38.057" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15413" PostTypeId="1" CreationDate="2018-04-22T17:13:20.740" Score="0" ViewCount="763" Body="&lt;p&gt;Please help me on last question and this issue also, when i am playing video on youtube so getting below message on video and and its getting stuck on same point&#xA;&lt;strong&gt;If playback doesn't begin shortly, try restarting your device&lt;/strong&gt;&#xA;I restarted but issue still is there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As i asked last question about any video off line or on line, Audio and video combination issue i am facing and i have updated all pending update on same day but still i am facing issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in anticipation.&lt;/p&gt;&#xA;" OwnerUserId="14493" LastEditorUserId="26717" LastEditDate="2021-10-13T08:27:12.707" LastActivityDate="2024-03-01T18:03:40.393" Title="YouTube Video Playback Issues requesting for restart but still not working in Elementary OS" Tags="|videos|web-browser|video-playback|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15414" PostTypeId="1" CreationDate="2018-04-22T19:41:59.497" Score="1" ViewCount="31" Body="&lt;p&gt;In my specific case, I'm using an HP Color Laserjet Pro MFP M477fdw. I am having trouble, because depending on which driver I choose, different features are available (eg, I cannot print with duplex using the top option).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I have experienced this problem with other printers, too. The problem is that I do not know which one to choose, because there are many options with the same name. See the screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Er9zZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Er9zZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which one do I choose? If I were to guess, one is for the M477dw, or the M477fdn, etc. etc. Is there a way to see the full name of the driver as well as any additional information about it? Or am I left guessing and checking until all the features work?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Additionally, I'm not sure I'm choosing the correct &quot;network printer&quot; option. When choosing the printer on my network list, I have two options for my printer, &lt;code&gt;HP Color Laserjet MFP M477fdw&lt;/code&gt; and &lt;code&gt;HP Color Laserjet MFP M477fdw (49BC77)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dGjPH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dGjPH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know what 49BC77 means. I have been selecting the option above it before adding the driver. Does this have an effect?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="14000" LastActivityDate="2018-04-22T19:41:59.497" Title="Which printer driver should I use when there are many options available with the same name?" Tags="|printer|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15415" PostTypeId="2" ParentId="12429" CreationDate="2018-04-23T03:23:48.897" Score="0" Body="&lt;p&gt;The Language Setup is not complete - click the complete button under Language Settings. Then, ctlr+c and other shortcuts will work as expected&lt;/p&gt;&#xA;" OwnerUserId="14496" LastActivityDate="2018-04-23T03:23:48.897" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15417" PostTypeId="1" CreationDate="2018-04-23T21:14:04.543" Score="1" ViewCount="673" Body="&lt;p&gt;Is there a terminal for elementary with the &quot;badge feature&quot; like iTerm for Mac?&#xA;With many open terminal windows it is very helpful to see the current terminal informations in the right top corner of a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't know iTerm badge have a look &lt;a href=&quot;http://dasari.me/2016/08/29/iterm-badges.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Especially the second picture:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vzllP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vzllP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If nobody knows a linux alternative maybe this could be nice feature request for (not only pantheon-)terminal.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2019-04-20T06:00:52.807" Title="Terminal with iTerm (Mac) like label" Tags="|pantheon-terminal|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15418" PostTypeId="2" ParentId="15323" CreationDate="2018-04-23T23:35:34.597" Score="1" Body="&lt;p&gt;I'm just trying to get to the bottom of this in case more people see this issue. This answer is a bit haphazard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem seems to be that the apt package doesn't have the file &lt;code&gt;/usr/bin/io.elementary.terminal&lt;/code&gt;&#xA;in it anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check for yourself, install &lt;code&gt;aptitude&lt;/code&gt;, and run this in another terminal program:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;aptitude download pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The file will be ~4kB. You can open it in archive manager to investigate further. Inside, in the data portion, there's only &lt;code&gt;/usr/share/doc/&lt;/code&gt;and &lt;code&gt;/usr/share/man/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This only seems to happen when on the daily elementary PPA, which I don't know how it would be configured that way in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you point out in a comment, to fix it you will need to change your package source by removing the daily ppa and adding the stable one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How to fix it:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need access to a terminal. You can press Ctrl-Alt-F1 to access one at &lt;code&gt;tty1&lt;/code&gt; (Alt-F7 to return to your desktop afterwards), or install another from App Centre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First purge the pantheon-terminal files from your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then remove the daily ppa like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt add-apt-repository --remove ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then add the stable repository to your sources:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can update and install the terminal again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12263" LastActivityDate="2018-04-23T23:35:34.597" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15419" PostTypeId="2" ParentId="15210" CreationDate="2018-04-23T23:44:24.437" Score="1" Body="&lt;p&gt;I have copied my answer from &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15323/im-having-this-issue-with-pantheon-terminal/15418#15418&quot;&gt;my answer to question 15323&lt;/a&gt;. The package is corrupt in elementary's daily ppa for Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem seems to be that the apt package doesn't have the file &lt;code&gt;/usr/bin/io.elementary.terminal&lt;/code&gt;&#xA;in it anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check for yourself, install &lt;code&gt;aptitude&lt;/code&gt;, and run this in another terminal program:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;aptitude download pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The file will be ~4kB. You can open it in archive manager to investigate further. Inside, in the data portion, there's only &lt;code&gt;/usr/share/doc/&lt;/code&gt;and &lt;code&gt;/usr/share/man/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This only seems to happen when on the daily elementary PPA, which I don't know how it would be configured that way in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As Ernesto points out in a comment to his question, to fix it you will need to change your package source by removing the daily ppa and adding the stable one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How to fix it:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need access to a terminal. You can press Ctrl-Alt-F1 to access one at &lt;code&gt;tty1&lt;/code&gt; (Alt-F7 to return to your desktop afterwards), or install another from App Centre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First purge the pantheon-terminal files from your system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then remove the daily ppa like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt add-apt-repository --remove ppa:elementary-os/daily&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then add the stable repository to your sources:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can update and install the terminal again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install pantheon-terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12263" LastActivityDate="2018-04-23T23:44:24.437" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15420" PostTypeId="2" ParentId="577" CreationDate="2018-04-24T08:50:03.167" Score="0" Body="&lt;p&gt;Did anyone actually tested it if it works?&#xA;I tried this method now on LOKI and it doesn't seem to work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Ordering Index Overrides]&#xA;nm-applet=1&#xA;gnome-power-manager=2&#xA;ibus=3&#xA;gst-keyboard-xkb=4&#xA;gsd-keyboard-xkb=5&#xA;my-weather-indicator=6&#xA;indicator-sensors=7&#xA;Telegram=8&#xA;megasync=9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xEzf3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xEzf3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I messed something up, help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-06-11T09:26:18.817" LastActivityDate="2018-06-11T09:26:18.817" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15421" PostTypeId="2" ParentId="15417" CreationDate="2018-04-24T14:24:27.063" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nbiwm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nbiwm.png&quot; alt=&quot;terminal_bashrc&quot;&gt;&lt;/a&gt;I am not sure what you are asking for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps this screen shot will enlighten .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The top of each tab should by default show what directory or program you are running in that terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this not what you were expecting? It is the same behavior as the default terminal for Mac OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure what is different on your default terminal in elementary from what you would expect. Cursor is controled by setting of the shell you chave chosen to use. e.g. bash in your example as well as mine. Perhaps man bash is in order or a google search on .bashrc.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/C9zV9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C9zV9.png&quot; alt=&quot;default terminal program with two tabs&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14459" LastEditorUserId="14459" LastEditDate="2018-04-24T14:53:16.023" LastActivityDate="2018-04-24T14:53:16.023" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15422" PostTypeId="1" AcceptedAnswerId="15434" CreationDate="2018-04-24T15:24:35.663" Score="0" ViewCount="1670" Body="&lt;p&gt;I'm trying to install libgconf-2-4 and get the below error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Setting up gconf2-common (3.2.6-3ubuntu6) ...&#xA;dpkg: error processing package gconf2-common (--configure):&#xA; subprocess installed post-installation script returned error exit status 10&#xA;dpkg: dependency problems prevent configuration of libgconf-2-4:amd64:&#xA; libgconf-2-4:amd64 depends on gconf2-common (= 3.2.6-3ubuntu6); however:&#xA;  Package gconf2-common is not configured yet.&#xA;&#xA;dpkg: error processing package libgconf-2-4:amd64 (--configure):&#xA; dependency problems - leaving unconfigured&#xA;No apport report written because the error message indicates its a followup error from a previous failure.&#xA;                                                                                                          dpkg: dependency problems prevent configuration of gconf-service-backend:&#xA; gconf-service-backend depends on libgconf-2-4 (= 3.2.6-3ubuntu6); however:&#xA;  Package libgconf-2-4:amd64 is not configured yet.&#xA; gconf-service-backend depends on gconf2-common (= 3.2.6-3ubuntu6); however:&#xA;  Package gconf2-common is not configured yet.&#xA;&#xA;dpkg: error processing package gconf-service-backend (--configure):&#xA; dependency problems - leaving unconfigured&#xA;No apport report written because the error message indicates its a followup error from a previous failure.&#xA;                                                                                                          dpkg: dependency problems prevent configuration of gconf-service:&#xA; gconf-service depends on gconf-service-backend (= 3.2.6-3ubuntu6); however:&#xA;  Package gconf-service-backend is not configured yet.&#xA;&#xA;dpkg: error processing package gconf-service (--configure):&#xA; dependency problems - leaving unconfigured&#xA;No apport report written because MaxReports is reached already&#xA;                                                              dpkg: dependency problems prevent configuration of gconf2:&#xA; gconf2 depends on gconf-service; however:&#xA;  Package gconf-service is not configured yet.&#xA; gconf2 depends on libgconf-2-4 (&amp;gt;= 3.2.6-3ubuntu6); however:&#xA;  Package libgconf-2-4:amd64 is not configured yet.&#xA; gconf2 depends on gconf-service-backend (= 3.2.6-3ubuntu6); however:&#xA;  Package gconf-service-backend is not configured yet.&#xA;&#xA;dpkg: error processing package gconf2 (--configure):&#xA; dependency problems - leaving unconfigured&#xA;No apport report written because MaxReports is reached already&#xA;                                                              dpkg: dependency problems prevent configuration of insomnia:&#xA; insomnia depends on gconf2; however:&#xA;  Package gconf2 is not configured yet.&#xA; insomnia depends on gconf-service; however:&#xA;  Package gconf-service is not configured yet.&#xA;&#xA;dpkg: error processing package insomnia (--configure):&#xA; dependency problems - leaving unconfigured&#xA;No apport report written because MaxReports is reached already&#xA;                                                              Processing triggers for libc-bin (2.23-0ubuntu10) ...&#xA;Errors were encountered while processing:&#xA; gconf2-common&#xA; libgconf-2-4:amd64&#xA; gconf-service-backend&#xA; gconf-service&#xA; gconf2&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyone know how I can solve this?&lt;/p&gt;&#xA;" OwnerUserId="14502" LastActivityDate="2018-12-22T10:00:24.950" Title="Problem with install libgconf-2-4" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15423" PostTypeId="2" ParentId="15349" CreationDate="2018-04-24T15:49:01.193" Score="2" Body="&lt;p&gt;You might be out of luck here. &lt;code&gt;Granite.Widgets.Welcome&lt;/code&gt; does not have an API for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's an approach that might still work: &lt;code&gt;Granite.Widgets.Welcome&lt;/code&gt; is a subclass of &lt;code&gt;Gtk.Bin&lt;/code&gt; containing a &lt;code&gt;Gtk.Grid&lt;/code&gt;. To get at the label you should first get the grid using &lt;code&gt;Granite.Widgets.Welcome.get_child ()&lt;/code&gt; and then search for the label inside that grid using &lt;code&gt;Gtk.Grid.get_children ()&lt;/code&gt; which returns a list of all children. In that list you should find your desired label. To align the text to the left, just set &lt;code&gt;that_label.justify = Gtk.Justification.LEFT&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;However&lt;/strong&gt;, you really should not do this. &lt;code&gt;Granite.Widgets.Welcome&lt;/code&gt; is not meant for this purpose. It should contain short headings and everything  that goes further should not be included here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would suggest using a &lt;code&gt;Gtk.Dialog&lt;/code&gt; with a &quot;Do not show again&quot; tick box  that pops up on startup instead.&lt;/p&gt;&#xA;" OwnerDisplayName="user14503" LastActivityDate="2018-04-24T15:49:01.193" CommentCount="2" ContentLicense="CC BY-SA 3.0" />
  <row Id="15424" PostTypeId="2" ParentId="15193" CreationDate="2018-04-24T20:22:33.407" Score="1" Body="&lt;pre&gt;&#xA;sudo apt purge lightdm&#xA;sudo apt autoremove lightdm&#xA;sudo apt install lightdm&#xA;&lt;/pre&gt;&#xA;" OwnerUserId="14505" LastActivityDate="2018-04-24T20:22:33.407" CommentCount="3" ContentLicense="CC BY-SA 3.0" />
  <row Id="15425" PostTypeId="1" CreationDate="2018-04-24T21:31:42.490" Score="1" ViewCount="102" Body="&lt;p&gt;When I try to update the system or install updates through:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update; sudo apt upgrade -y;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sub-process /usr/bin/dpkg returned an error code (1)&#xA;When processing the following packages, errors occurred:&#xA; apport&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I suppressed this error by freezing the package via aptitude, but can we somehow really solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="14506" LastEditorUserId="84" LastEditDate="2018-04-28T12:14:00.623" LastActivityDate="2018-04-28T12:14:00.623" Title="Broken apport return [Sub-process /usr/bin/dpkg returned an error code (1)]" Tags="|apt|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15426" PostTypeId="2" ParentId="15425" CreationDate="2018-04-24T21:44:49.413" Score="1" Body="&lt;p&gt;Solved the problem when I found the broken &quot;deb&quot; package in &quot;/var/cache/apt/archives&quot; and deleted it.&lt;/p&gt;&#xA;" OwnerUserId="14506" LastActivityDate="2018-04-24T21:44:49.413" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15429" PostTypeId="2" ParentId="12611" CreationDate="2018-04-25T08:58:23.263" Score="0" Body="&lt;pre&gt;&lt;code&gt;&amp;gt;&amp;gt;&amp;gt;:~/Downloads$ lspci -k | grep -EA2 'VGA|Display'&#xA;00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 7340]&#xA;    Subsystem: Sony Corporation Wrestler [Radeon HD 7340]&#xA;    Kernel driver in use: radeon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14509" LastActivityDate="2018-04-25T08:58:23.263" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15430" PostTypeId="2" ParentId="6840" CreationDate="2018-04-25T11:00:58.693" Score="2" Body="&lt;p&gt;Place the logo file on &lt;code&gt;/usr/share/themes/yourtheme&lt;/code&gt; location.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now open the &lt;code&gt;app.css&lt;/code&gt; file, remove the existing code and add this code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*********&#xA; * Panel *&#xA; ********/&#xA;&#xA;.panel {&#xA;    background-color: transparent;&#xA;    transition: all 100ms ease-in-out;&#xA;    background-image: url(&quot;elem.png&quot;);&#xA;    background-repeat: no-repeat;&#xA;}&#xA;&#xA;.panel .menubar:first-child {&#xA;  font-size: 0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, kill the panel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the rest of things will handled by cerbere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have fun!&lt;/p&gt;&#xA;" OwnerUserId="14512" LastEditorUserId="84" LastEditDate="2018-04-28T12:26:02.550" LastActivityDate="2018-04-28T12:26:02.550" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15431" PostTypeId="1" AcceptedAnswerId="15469" CreationDate="2018-04-25T11:22:17.390" Score="0" ViewCount="1156" Body="&lt;p&gt;A week ago I make a fresh OS install on a brand new ADATA SSD and wanted to check the TBW till now. Here is what I &quot;found&quot; in S.M.A.R.T.:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;=== START OF INFORMATION SECTION ===&#xA;Device Model:     ADATA SU800&#xA;Firmware Version: P1021A&#xA;User Capacity:    512,110,190,592 bytes [512 GB]&#xA;Sector Size:      512 bytes logical/physical&#xA;Rotation Rate:    Solid State Device&#xA;Form Factor:      2.5 inches&#xA;&#xA;Vendor Specific SMART Attributes with Thresholds:&#xA;ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE&#xA;241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      -       6548&#xA;&#xA;Device Statistics (GP Log 0x04)&#xA;Page  Offset Size        Value Flags Description&#xA;0x01  0x018  6       429149728  ---  Logical Sectors Written&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In short:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Total_LBAs_Written: &lt;strong&gt;6548&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Logical Sectors Written: &lt;strong&gt;429149728&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Also, &lt;code&gt;/proc/diskstats&lt;/code&gt; for &lt;code&gt;/dev/sda&lt;/code&gt; (field #10, &quot;sectors written&quot;): &lt;strong&gt;923561758&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing that I notice:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dumpe2fs /dev/sda3 | grep &quot;Filesystem created&quot;&lt;/code&gt; returns&#xA;Sun Apr 15 01:12:02 2018 (which is when I install the OS) and till now ~253 hours has elapsed. But Power_On_Hours in S.M.A.R.T. tells 196 hours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And here is the output of &lt;code&gt;df&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;  Filesystem      Size  Used Avail Use% Mounted on&#xA;  /dev/sda1       464M  200M  236M  46% /boot&#xA;  /dev/sda3       454G   58G  373G  14% /&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I'm &quot;sure&quot; is that the TBW should be more than 80GB (there were some files that were temporary stored on the SSD).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, how to check the TBW and which tool to trust?&lt;/p&gt;&#xA;" OwnerUserId="14428" LastActivityDate="2018-05-03T14:13:50.957" Title="How to check the TBW for ADATA SSD?" Tags="|release-loki|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15434" PostTypeId="2" ParentId="15422" CreationDate="2018-04-25T16:39:34.260" Score="0" Body="&lt;p&gt;Try this command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install gconf2-common libgconf-2-4&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14514" LastActivityDate="2018-04-25T16:39:34.260" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15435" PostTypeId="1" CreationDate="2018-04-25T18:13:45.710" Score="1" ViewCount="31" Body="&lt;p&gt;once in a while I might get 200 email messages -- which leads to 200 notifications which must be closed one at a time. This is because the &quot;Clear all notifications&quot; menu item is always covered by notification bubbles. Anyone know how this could work? Perhaps give the menu higher priority/z-index than the notifications? Or even a command line argument to wingpanel as a workaround?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks.&lt;/p&gt;&#xA;" OwnerUserId="13560" LastActivityDate="2018-04-25T18:13:45.710" Title="Loki: cannot clear all notifications because menu is covered ... by notifications!" Tags="|release-loki|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15436" PostTypeId="2" ParentId="6840" CreationDate="2018-04-25T18:48:20.447" Score="1" Body="&lt;p&gt;I also added:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;background-position: 6px 0;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so the icon would line up with the icons in the dock (assuming you have the dock on the left). You might have to tweak it depending on the size of the icon you use.&lt;/p&gt;&#xA;" OwnerUserId="14332" LastEditorUserId="14332" LastEditDate="2018-04-25T21:42:51.353" LastActivityDate="2018-04-25T21:42:51.353" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15437" PostTypeId="1" AcceptedAnswerId="15453" CreationDate="2018-04-26T13:14:48.890" Score="0" ViewCount="278" Body="&lt;p&gt;I followed these instructions to install Infinality on Loki&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:no1wantdthisname/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install fontconfig-infinality&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and set the style to OSX, now the fonts look comparitively worse, how do I remove infinality and reset to the default rendering style?&lt;/p&gt;&#xA;" OwnerUserId="14519" LastActivityDate="2018-04-30T12:17:38.660" Title="How to Remove Infinality and use default settings?" Tags="|release-loki|fonts|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15438" PostTypeId="2" ParentId="15403" CreationDate="2018-04-26T16:46:16.003" Score="-1" Body="&lt;p&gt;Go to System Settings &gt; Applications &gt; Startup, and make a Custom Command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill block bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14521" LastEditorUserId="84" LastEditDate="2018-04-28T12:14:58.833" LastActivityDate="2018-04-28T12:14:58.833" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15440" PostTypeId="2" ParentId="15158" CreationDate="2018-04-27T14:34:44.730" Score="1" Body="&lt;p&gt;In the Files application, open two folders in different windows, for example, one in ~/Downloads and the other in ~/Documents.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select your file, now drag it to the other window while keeping the RIGHT button down. When you release the button, a small menu pops up letting you choose whether to move, copy or link the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TYBfS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TYBfS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You do have to have write priviliges to the folder you are dropping the file to. making links in /usr/bin, for example is best left to the command-line.&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-04-27T14:34:44.730" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15444" PostTypeId="1" CreationDate="2018-04-28T16:13:06.940" Score="2" ViewCount="671" Body="&lt;p&gt;I want to start the default mail application at startup in minimized mode. While the System settings app allows applications to be added to launch at startup, there is no option to start the specified application in a minimized window. How can be this be done?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am a newcomer to Linux, thus I would request the answers to be a little verbose, since my technical knowledge of Linux is limited.&lt;/p&gt;&#xA;" OwnerUserId="14534" LastEditorUserId="84" LastEditDate="2018-04-28T22:03:13.953" LastActivityDate="2020-11-15T15:21:03.237" Title="How to launch an app at startup in minimized mode?" Tags="|settings|startup|minimize|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15445" PostTypeId="2" ParentId="15444" CreationDate="2018-04-29T06:26:20.217" Score="1" Body="&lt;p&gt;I believe that Pantheon Mail will start in the background after startup if you select the option to always check for new mail. This way you'll always get a notification when the new mail arrives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I'm wrong, there is a pantheon-mail-autostart.desktop in /usr/share/applications folder so you may try to autostart this file instead of org.pantheon.mail.desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-04-29T06:26:20.217" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15449" PostTypeId="1" CreationDate="2018-04-29T19:34:49.650" Score="0" ViewCount="6832" Body="&lt;p&gt;Can we download and add docklets to plank? Is this possible?&lt;/p&gt;&#xA;" OwnerUserId="14544" LastActivityDate="2024-04-06T17:00:35.090" Title="Is there a way to add new docklets to plank?" Tags="|release-loki|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15450" PostTypeId="1" CreationDate="2018-04-30T07:52:36.767" Score="0" ViewCount="752" Body="&lt;p&gt;Put a new SSD in my old Dell Inspiron 3520, and although my wireless connected just fine from the version of Loki on the USB stick and appeared to install everything perfectly, when I reboot I have no wireless access or even detection of a card by network settings. When I plug in an ethernet cable it says I'm connected, but it can't identify an access point and I can't get online. But lspci shows both the wireless (Broadcom BCM43142) and ethernet cards. What's going on?&lt;/p&gt;&#xA;" OwnerUserId="9558" LastEditorUserId="9558" LastEditDate="2018-05-01T23:42:28.523" LastActivityDate="2019-02-06T13:33:28.383" Title="no internet after new installation" Tags="|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 3.0" />
  <row Id="15453" PostTypeId="2" ParentId="15437" CreationDate="2018-04-30T12:17:38.660" Score="0" Body="&lt;p&gt;You should be able to remove it with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge fontconfig-infinality&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And remove the PPA with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:no1wantdthisname/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8203" LastActivityDate="2018-04-30T12:17:38.660" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15454" PostTypeId="1" CreationDate="2018-04-30T21:41:28.730" Score="0" ViewCount="748" Body="&lt;p&gt;I use a program called Stremio and I managed to download it and make the stremio.appimage file executable BUT I can't figure out how to get this file into Aplications. At the moment if I want to use the program I have to open Files and go to the folder where it is and click on it. BUT I want to be able to add it to aplications and to the dock.&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="14552" LastActivityDate="2018-05-02T08:40:19.380" Title="How to make an appimage appear on aplications?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15457" PostTypeId="2" ParentId="9880" CreationDate="2018-05-01T08:09:44.773" Score="1" Body="&lt;p&gt;f.lux apparently currently does not support monitors with high colour depth. Redshift does. Redshift also seems more happy with dealing with multiple different multiple monitor set ups. As a result I have had to move from f.lux to Redshift after quite a few years happy usage for I hope they continue to develop it.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-01T08:09:44.773" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15458" PostTypeId="1" CreationDate="2018-05-01T11:57:38.817" Score="3" ViewCount="252" Body="&lt;p&gt;I'm having problems setting the HiDPI scaling factor for the log in screen and lock screen. Thanks for your help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS 0.4.1 Loki&lt;/p&gt;&#xA;" OwnerUserId="14556" LastEditorUserId="16827" LastEditDate="2019-02-06T13:31:13.977" LastActivityDate="2019-02-06T13:31:13.977" Title="How Do I set the HiDPI Scaling factor for the lock screen and log in screen?" Tags="|release-loki|hidpi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15459" PostTypeId="2" ParentId="8956" CreationDate="2018-05-01T18:09:52.513" Score="0" Body="&lt;p&gt;the simplest solution to me currently is to make plank strict between workspace and switch the workspace ,on ubuntu, or linux mint: &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+(&lt;kbd&gt;&amp;larr;&lt;/kbd&gt;or&lt;kbd&gt;&amp;rarr;&lt;/kbd&gt;). it refreshes the plank.&lt;/p&gt;&#xA;" OwnerUserId="14559" LastActivityDate="2018-05-01T18:09:52.513" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15460" PostTypeId="2" ParentId="15371" CreationDate="2018-05-01T22:40:20.113" Score="0" Body="&lt;p&gt;Try Settings→Sound and force the selection of Speakers.&lt;/p&gt;&#xA;" OwnerUserId="14560" LastActivityDate="2018-05-01T22:40:20.113" CommentCount="0" ContentLicense="CC BY-SA 3.0" />
  <row Id="15462" PostTypeId="2" ParentId="15454" CreationDate="2018-05-02T08:40:19.380" Score="1" Body="&lt;p&gt;Sounds like the AppImage isn't creating a .desktop file for itself, so Elementary doesn't know it's available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Never mind, there's an app in the AppCenter called &quot;AppEditor&quot;, you can use that to create a new entry for your AppImage.&lt;/p&gt;&#xA;" OwnerUserId="2753" LastActivityDate="2018-05-02T08:40:19.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15464" PostTypeId="1" CreationDate="2018-05-03T00:57:25.137" Score="0" ViewCount="90" Body="&lt;p&gt;I have an issue that after 5 minutes of not using my laptop I goes into sctreen saver and then I have to re enter my password. I cant find a setting to change this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="14570" LastActivityDate="2024-01-05T23:06:40.793" Title="Screen timeouts" Tags="|display|settings|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15465" PostTypeId="1" CreationDate="2018-05-03T03:35:17.650" Score="0" ViewCount="502" Body="&lt;p&gt;I'm trying to get the latest HPLIP 3.18.4 installed for a new printer that I purchased. My printer requires HPLIP 3.16.11 or greater and Elementary OS only provides 3.16.3 at this time.&#xA;Going through a lot of previous issues that people have had installing this software, I got mostly the way through it, but it's still failing on 2 &quot;missing&quot; dependencies.  I put missing in quotes because the install script says that they're missing, but they're both installed and on the latest versions according to Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some other resources that helped me get this far;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1871/how-do-i-install-the-new-version-of-hplip&quot;&gt;How do I install the new version of HPLIP?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14796/hplip-drive-in-elementary&quot;&gt;HPLIP Drive in Elementary&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://michael-peeters.blogspot.ca/2013/10/hp-printer-setup-under-elementary-os_20.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://michael-peeters.blogspot.ca/2013/10/hp-printer-setup-under-elementary-os_20.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    MISSING DEPENDENCIES&#xA;    --------------------&#xA;    Following dependencies are not installed. HPLIP will not work if all REQUIRED &#xA;dependencies are not installed and some of the HPLIP features will not work if &#xA;OPTIONAL dependencies are not installed.&#xA;    Package-Name         Component            Required/Optional   &#xA;    pil                  scan                 OPTIONAL            &#xA;    reportlab            fax                  OPTIONAL            &#xA;    libtool              base                 REQUIRED            &#xA;    dbus                 fax                  REQUIRED&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is by using the package hplip-3.18.4-run for Ubuntu.  Both of the required packages show installed on my system, so I'm guessing the Elementary guys did some finagling to get this working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pil is Python Imaging Library and installed with &quot;apt install python-imaging&quot; and Reportlab is installed with &quot;apt install python-reportlab&quot;.  After that I'm stuck with just the libtool and dbus errors that won't let me continue.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$sudo apt list dbus&#xA;Listing... Done&#xA;dbus/xenial-updates,now 1.10.6-1ubuntu3.3 amd64 [installed]&#xA;$sudo apt list libtool&#xA;Listing... Done&#xA;libtool/xenial,xenial,now 2.4.6-0.1 all [installed]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, why is the script complaining that they aren't installed?  How do I solve this, or trick the script into seeing that they are?  Maybe a symlink not set up somewhere?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Out of curiosity I downloaded 3.16.11 thinking that's it's close to the same branch as what's bundled with Elementary and it also fails on the same 2 dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is greatly appreciated!&lt;/p&gt;&#xA;" OwnerUserId="11732" LastEditorUserId="11732" LastEditDate="2018-05-03T11:28:15.013" LastActivityDate="2024-03-14T08:00:06.430" Title="HPLIP 3.18.4 upgrade" Tags="|release-loki|printer|dependencies|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15466" PostTypeId="2" ParentId="15464" CreationDate="2018-05-03T03:39:51.673" Score="0" Body="&lt;p&gt;What do you see when you go into System Settings, Security and Privacy, then click Locking on the left side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/grQW1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/grQW1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-05-03T03:39:51.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15467" PostTypeId="2" ParentId="15449" CreationDate="2018-05-03T12:24:19.593" Score="0" Body="&lt;p&gt;If you are talking about adding icons like the Terminal app to Plank, you can either right click the icon when it's open and click &quot;Keep to Dock&quot;, or you can find it in the Applications menu and do the same thing.&lt;/p&gt;&#xA;" OwnerDisplayName="user14377" LastActivityDate="2018-05-03T12:24:19.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15468" PostTypeId="2" ParentId="15256" CreationDate="2018-05-03T12:35:10.940" Score="1" Body="&lt;p&gt;You can also install .deb files. It is a lot like installing a .exe in Windows. You'll need an app from the AppCenter called Eddy in order to install these binaries, but for things like Wire Messenger and Chrome (if you like Chrome) you'll need to get the .deb file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are other ways too. For instance, I love Calibre (the ebook library management tool), but the only way to get the latest version in an Ubuntu derivative is to install from source on their website (&lt;a href=&quot;https://calibre-ebook.com/download_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://calibre-ebook.com/download_linux&lt;/a&gt;) using a script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just search the web and you'll find all sorts of fun stuff for Linux/eOS. Welcome to the elementaryOS community!&lt;/p&gt;&#xA;" OwnerDisplayName="user14377" LastActivityDate="2018-05-03T12:35:10.940" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15469" PostTypeId="2" ParentId="15431" CreationDate="2018-05-03T14:13:50.957" Score="0" Body="&lt;p&gt;After some digging and Googling, finally I discover how to &quot;read&quot; (interpret) the S.M.A.R.T attribute &lt;code&gt;241 Total_LBAs_Written&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually the &lt;code&gt;Total_LBAs_Written&lt;/code&gt; shows the number of sectors written but for that drive (ADATA SU800, which is not listed in the smartctl database) this attribute shows the number of &quot;blocks (of 32MB)&quot; written. On other drives the name for the attr. 241 is &lt;code&gt;Host_Writes_32MiB&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, when do the math with the number from the question: &lt;code&gt;(6548*32MB)/512 = 429129728&lt;/code&gt; logical sectors! A number very close to the one from the &quot;Device Statistics&quot; info.&lt;/p&gt;&#xA;" OwnerUserId="14428" LastActivityDate="2018-05-03T14:13:50.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15470" PostTypeId="2" ParentId="12130" CreationDate="2018-05-04T05:46:01.913" Score="1" Body="&lt;p&gt;This will be a late reply, but here's how I fixed this problem:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Removed the problematic URL lists from the &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file &lt;/li&gt;&#xA;&lt;li&gt;Rebooted the machine&lt;/li&gt;&#xA;&lt;li&gt;Re-added the URL lists back to the &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file with appropriate URLs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This helped me download latest updates from elementary software, and is how I fixed the problem.&lt;/p&gt;&#xA;" OwnerUserId="9881" LastEditorUserId="84" LastEditDate="2018-05-04T12:28:54.367" LastActivityDate="2018-05-04T12:28:54.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15471" PostTypeId="1" CreationDate="2018-05-04T15:29:26.453" Score="0" ViewCount="455" Body="&lt;p&gt;I recently tried to use elementary OS on my ThinkPad T420. Most of the hardware worked just fine out of the box: wifi, sound, graphics, etc.&#xA;However, battery life on elementary OS has been very, very bad! It lasts about an hour at most. I have installed and enabled TLP, but it doesn't seem to make any difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same laptop on Solus, Ubuntu or Mint lasts around 3 hours, and on Windows around 4 hours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tested the system by browsing the web on Firefox/Chromium, some light app installing, and general OS exploring. Nothing demanding has been ran when I tested the battery life. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="14580" LastEditorUserId="84" LastEditDate="2018-05-05T18:08:14.943" LastActivityDate="2018-07-05T09:08:26.120" Title="Poor battery life on ThinkPad T420" Tags="|battery|thinkpad|tlp|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15472" PostTypeId="2" ParentId="15471" CreationDate="2018-05-04T16:01:56.977" Score="1" Body="&lt;p&gt;I've had issues with battery life before, and every time it turned out to be a faulty install. Try reinstalling the OS and it should fix the issue. Elementary doesn't use any different drivers battery-wise than Ubuntu and if you have no problems on there, you shouldn't have any problems on elementary either.&lt;/p&gt;&#xA;" OwnerUserId="10264" LastActivityDate="2018-05-04T16:01:56.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15474" PostTypeId="2" ParentId="15471" CreationDate="2018-05-05T07:48:17.977" Score="0" Body="&lt;p&gt;thanks for the tip.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reinstalled it and the issue remains the same. I left powertop running for a while, check the info below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;PowerTOP 2.8      Overview   Idle stats   Frequency stats   Device stats   Tunables                                     &#xA;&#xA;The battery reports a discharge rate of 11.2 W&#xA;The estimated remaining time is 1 hours, 9 minutes&#xA;&#xA;Summary: 767.5 wakeups/second,  0.0 GPU ops/seconds, 0.0 VFS ops/sec and 21.2% CPU use&#xA;&#xA;                Usage       Events/s    Category       Description&#xA;             1993 rpm                   Device         Laptop fan&#xA;             50.2 ms/s     139.7        Process        /opt/google/chrome/chrome --type=renderer --field-trial-handle=14154079299553752411,6608151803463361335,131072 --se&#xA;              4.3 ms/s     132.1        Timer          hrtimer_wakeup&#xA;             16.6 ms/s      83.4        Process        /opt/google/chrome/chrome&#xA;             11.8 ms/s      75.6        Process        /opt/google/chrome/chrome --type=gpu-process --field-trial-handle=14154079299553752411,6608151803463361335,131072 -&#xA;              8.5 ms/s      60.1        Process        gala&#xA;              2.1 ms/s      61.4        Timer          tick_sched_timer&#xA;             15.3 ms/s      54.8        Process        /opt/google/chrome/chrome --type=renderer --field-trial-handle=14154079299553752411,6608151803463361335,131072 --se&#xA;             77.9 ms/s       7.7        kWork          intel_atomic_commit_work&#xA;              1.1 ms/s      21.6        Interrupt      PS/2 Touchpad / Keyboard / Mouse&#xA;              7.8 ms/s      16.5        Process        /usr/lib/xorg/Xorg -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch&#xA;            213.5 µs/s      19.7        Interrupt      [28] iwlwifi&#xA;              1.5 ms/s      16.9        Interrupt      [25] i915&#xA;            171.6 µs/s      13.6        Process        [rcu_sched]&#xA;              1.5 ms/s       9.5        Interrupt      [7] sched(softirq)&#xA;            343.8 µs/s       8.7        Process        [irq/28-iwlwifi]&#xA;            221.0 µs/s       7.1        kWork          ieee80211_iface_work&#xA;             48.7 µs/s       6.9        kWork          console_callback&#xA;            105.9 µs/s       5.9        Process        [i915/signal:0]&#xA;            410.1 µs/s       3.9        Process        /usr/sbin/acpid&#xA;             70.9 µs/s       2.9        kWork          iwl_bg_run_time_calib_work&#xA;              1.6 ms/s       1.7        Process        /opt/google/chrome/chrome --type=renderer --field-trial-handle=14154079299553752411,6608151803463361335,131072 --se&#xA;            428.2 µs/s       2.0        Process        wingpanel&#xA;            385.4 µs/s       1.5        Process        plank&#xA;             20.6 µs/s       1.5        kWork          intel_atomic_helper_free_state_&#xA;&#xA;            297.6 µs/s       0.8        Process        /usr/lib/x86_64-linux-gnu/bamf/bamfdaemon&#xA;              1.4 ms/s       0.4        kWork          disk_events_workfn&#xA;             20.8 µs/s       0.9        kWork          iwl_pcie_rx_allocator_work&#xA;              1.0 ms/s       0.4        kWork          i915_gem_idle_work_handler&#xA;            187.5 µs/s       0.7        Interrupt      [4] block(softirq)&#xA;            309.1 µs/s       0.6        Process        pantheon-terminal&#xA;            264.5 µs/s       0.7        Process        /opt/google/chrome/chrome --type=renderer --field-trial-handle=14154079299553752411,6608151803463361335,131072 --se&#xA;             16.8 µs/s       0.7        kWork          vmstat_shepherd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;By the time I left it run and posted this (10 min of usage), I lost around 15% of battery :(&lt;/p&gt;&#xA;" OwnerUserId="14580" LastEditorUserId="14580" LastEditDate="2018-05-05T10:02:51.307" LastActivityDate="2018-05-05T10:02:51.307" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15478" PostTypeId="5" CreationDate="2018-05-05T22:54:04.363" Score="0" Body="&lt;p&gt;Juno is the code name for elementary OS 5.0. It was released in October 2018.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="16827" LastEditDate="2019-12-07T06:54:58.583" LastActivityDate="2019-12-07T06:54:58.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15479" PostTypeId="4" CreationDate="2018-05-05T22:54:04.363" Score="0" Body="Questions specific to elementary OS 5.0, codenamed &quot;Juno&quot;." OwnerUserId="84" LastEditorUserId="9" LastEditDate="2018-11-08T09:07:31.133" LastActivityDate="2018-11-08T09:07:31.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15481" PostTypeId="2" ParentId="11064" CreationDate="2018-05-06T13:19:56.853" Score="0" Body="&lt;p&gt;This is a workaround, not a solution&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;install &lt;em&gt;Dropbox&lt;/em&gt; on both your eOS computer and on the iOS device.&lt;/li&gt;&#xA;&lt;li&gt;on the iOS device, also install the &lt;em&gt;Files&lt;/em&gt; app from Apple (standard in recent versions of iOS)&lt;/li&gt;&#xA;&lt;li&gt;Set &lt;em&gt;Dropbox&lt;/em&gt; as one of the destinations in iOS &lt;em&gt;Files&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Create a folder in &lt;em&gt;Dropbox&lt;/em&gt;, something like &quot;New Pictures&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now, in the iOS &lt;em&gt;Photos&lt;/em&gt; app, you should be able to select your photos, then touch the Share widget at the bottom-left corner. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &quot;Send to Files&quot; as the action you want to take (should be in the bottom row, among the black-and-white icons), then drill down to Dropbox | New Pictures as the ultimate destination. Touch &quot;Add&quot; in the top right corner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Within the next few minutes, your images will start appearing in the Dropbox folder on your PC and you can import them into whatever app you like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes, it's a kludge, I know, and it is irritating that with a billion iPhones floating around we can't just plug them in and expect them to work. Well, You'll have to talk to Apple about that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the bright side, this workaround does not require you to plug your phone into your PC. It will work from the other side of the world!&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-05-06T13:19:56.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15482" PostTypeId="2" ParentId="9345" CreationDate="2018-05-06T19:14:39.260" Score="1" Body="&lt;p&gt;To supplement felix's answer, you can use Snaps, if they're available. They are often more updated than the repositories and have a beta / unstable channel.&lt;/p&gt;&#xA;" OwnerUserId="8481" LastActivityDate="2018-05-06T19:14:39.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15486" PostTypeId="1" CreationDate="2018-05-07T18:14:41.717" Score="0" ViewCount="148" Body="&lt;p&gt;How to disable touchpad stop when typing?&#xA;I know how to do it on Ubuntu, but there are other settings and this item no.&lt;/p&gt;&#xA;" OwnerUserId="14607" LastActivityDate="2023-12-12T09:06:45.900" Title="Touchpad doesn't work with keyboard" Tags="|settings|system|keyboard|touchpad|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15487" PostTypeId="1" CreationDate="2018-05-07T18:20:05.843" Score="1" ViewCount="32306" Body="&lt;p&gt;I have just installed Elementary OS.&#xA;My WiFi is not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are tons of solutions out there, and  i have no idea which will work. Rather than trying all of them, it would be nice to have a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hardware:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    $ lshw -C network&#xA;WARNING: you should run this program as super-user.&#xA;  *-network               &#xA;       description: Ethernet interface&#xA;       product: 82579LM Gigabit Network Connection&#xA;       vendor: Intel Corporation&#xA;       physical id: 19&#xA;       bus info: pci@0000:00:19.0&#xA;       logical name: eno1&#xA;       version: 04&#xA;       serial: f0:1f:af:31:5f:e5&#xA;       capacity: 1Gbit/s&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.13-3 latency=0 link=no multicast=yes port=twisted pair&#xA;       resources: irq:27 memory:f7e00000-f7e1ffff memory:f7e39000-f7e39fff ioport:f080(size=32)&#xA;  *-network&#xA;       description: Network controller&#xA;       product: BCM43228 802.11a/b/g/n&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list&#xA;       configuration: driver=bcma-pci-bridge latency=0&#xA;       resources: irq:17 memory:f7d00000-f7d03fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried solutions in &lt;a href=&quot;https://elementaryos.stackexchange.com/q/7687/14608&quot;&gt;WiFi is not working on Loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ rfkill list all&#xA;1: dell-wifi: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Even the following didn't work.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nmcli radio wifi on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Wifi did work during installation as it recognized my WiFi card (inside the laptop itself)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many solutions suggest installing Backport. But I am not sure which one to install. A little help would be really beneficial.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It just doesn't work now.&lt;/p&gt;&#xA;" OwnerUserId="14608" LastEditorUserId="14608" LastEditDate="2018-05-08T10:31:16.890" LastActivityDate="2019-12-06T05:48:28.340" Title="Wireless Network not working after Installation" Tags="|wifi|networking|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15489" PostTypeId="2" ParentId="15487" CreationDate="2018-05-08T11:06:50.357" Score="2" Body="&lt;p&gt;Ohk. I just found the solution for the problem above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;code&gt;AppCenter -&amp;gt; Updates&lt;/code&gt; and look into &lt;code&gt;Drivers&lt;/code&gt; section. Install the software recommended there. That's it. It downloads and installs and WiFi starts working.&lt;/p&gt;&#xA;" OwnerUserId="14608" LastActivityDate="2018-05-08T11:06:50.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15492" PostTypeId="1" CreationDate="2018-05-08T16:08:46.290" Score="0" ViewCount="344" Body="&lt;p&gt;So, I installed wine and then I installed Android Studio from it. The icon shows up on Applications but it does not run. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I removed Wine. Now, I still have that unworking icon in Applications for Android Studio that does not work. How do I remove it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, is there a cleaner for Linux that helps with uninstalling unnecessary applications?&lt;/p&gt;&#xA;" OwnerUserId="14053" LastActivityDate="2023-12-11T19:04:55.573" Title="I can't uninstall Anroid Studio" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15493" PostTypeId="2" ParentId="15492" CreationDate="2018-05-08T16:19:37.123" Score="0" Body="&lt;p&gt;I can't help with deleting the wine android studio, but: Android Studio works fine on all ubuntu derivates (like elementary os). For installation see this link: &lt;a href=&quot;https://askubuntu.com/questions/634082/how-to-install-android-studio-on-ubuntu&quot;&gt;https://askubuntu.com/questions/634082/how-to-install-android-studio-on-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7110" LastActivityDate="2018-05-08T16:19:37.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15494" PostTypeId="2" ParentId="14337" CreationDate="2018-05-08T18:21:25.757" Score="6" Body="&lt;p&gt;I don't like the options involving Autokey and others. For me, I found the best solution in Tweak Tool. You can install Tweak Tool in eOS's AppCenter. Under the &lt;code&gt;Typing&lt;/code&gt; section of TweakTool you can choose &lt;code&gt;Alt/Win key behavior&lt;/code&gt; -&gt; &lt;code&gt;Alt is swapped with Win&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also do &lt;code&gt;Ctrl key position&lt;/code&gt; -&gt; &lt;code&gt;Swap Left Win key with Left Ctrl key&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an operating system agnostic keyboard where I swapped the Super key (aka the ⌘ key or Win key) with the Alt key to look like the Mac keyboard. So far this solution has worked ~ok~ for me, but I would definitely prefer a real solution from eOS since it is advertised as a Mac replacement.&lt;/p&gt;&#xA;" OwnerUserId="14064" LastEditorUserId="14064" LastEditDate="2019-04-24T17:23:27.027" LastActivityDate="2019-04-24T17:23:27.027" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15495" PostTypeId="1" CreationDate="2018-05-08T19:30:29.223" Score="-1" ViewCount="56" Body="&lt;p&gt;After paying I can't download anything. Why's that?&lt;/p&gt;&#xA;" OwnerUserId="14614" LastEditorUserId="84" LastEditDate="2018-05-08T22:45:17.567" LastActivityDate="2018-05-09T16:48:52.363" Title="After paying I can't download anything" Tags="|system-installation|elementary-website|" AnswerCount="1" CommentCount="0" ClosedDate="2018-08-22T02:06:52.767" ContentLicense="CC BY-SA 4.0" />
  <row Id="15497" PostTypeId="2" ParentId="797" CreationDate="2018-05-09T06:23:30.290" Score="0" Body="&lt;p&gt;So there are all sorts of issues surrounding running Emacs on Elementary and you'll find no evidence of an Emacs 25 package anywhere. However Emacs 25.3 will run successfully on Loki without any of the helpful work-arounds suggested above (which will also work - I've tried most of them with the stock Emacs 24). If you get the source packages, currently 25.3, (git clone &lt;a href=&quot;https://git.savannah.gnu.org/git/emacs.git&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.savannah.gnu.org/git/emacs.git&lt;/a&gt;) then build it for a -nox version and for gui version (--with-x-toolkit=lucid) then installing both will work fine. Of course this does not guarantee that your emacs configuration will work and I have a many year old .emacs file and .emacs.d directory full of modules and configurations to make it work for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although I build debs for both my emacs25-nox and my emacs25 these are in an early stage and overwrite common files. I have a desktop file for emacs25 only (emacs-nox working out of the shell only with no gui so why have it in the desktop). I install it into /usr/local/bin so as to not overwrite the standard emacs. I have early level debs such that emacs25.deb requires emacs25-nox so that it doesn't actually overwrite anything. If/when that works, I'd be willing to share...&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-09T06:23:30.290" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15498" PostTypeId="2" ParentId="13547" CreationDate="2018-05-09T06:43:52.747" Score="0" Body="&lt;p&gt;OpenVPN settings seem to work the wrong way. The default is to force all traffic down the VPN. The option is to send only traffic to the VPN'd network down the VPN.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you edit your VPN setting and click on the IPv4 tab (er, assuming you haven't moved to IPv6 yet) then you will see a &quot;Routes&quot; button near the bottom. Click on this. In the routes section you will see &quot;Use this connection only for resources on its network&quot; - clicking this will allow all traffic to the outside of the VPN to flow out through your local router but having it unselected will fource all of your traffic down the VPN.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://images.quru.com/image?src=roland/OpenVPN+destination+routes+only.png&amp;amp;strip=1&quot; alt=&quot;VPN Settings&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-09T06:43:52.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15501" PostTypeId="2" ParentId="15495" CreationDate="2018-05-09T16:48:52.363" Score="0" Body="&lt;p&gt;Fill in “0” in the custom field and try again. &lt;/p&gt;&#xA;" OwnerUserId="14621" LastActivityDate="2018-05-09T16:48:52.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15502" PostTypeId="1" CreationDate="2018-05-10T00:33:27.157" Score="1" ViewCount="208" Body="&lt;p&gt;Starting today after regularly using VPN using Loki's built-in nav-bar gui, I can't connect.  When I attempt to select the VPN service, it shows as an exclamation mark in a red circle.  Tooltip shows message &quot;The Virtual Private Network could not be connected to.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Do5BT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Do5BT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to successfully connect via the command line however (using openconnect directly) so it must be something wrong with the GUI?  Any suggestions as to what has happened?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked /var/log/syslog, grepping for both NetworkManager and openconnect and didn't find anything useful.  There were no hits for &quot;openconnect&quot; at all.&lt;/p&gt;&#xA;" OwnerUserId="13402" LastActivityDate="2018-05-10T00:33:27.157" Title="VPN failed for openconnect server" Tags="|release-loki|vpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15504" PostTypeId="1" CreationDate="2018-05-10T03:17:27.740" Score="0" ViewCount="45" Body="&lt;p&gt;I am obliged to mount theses disks,( that i am using as storage with wine app , or virtualbox ) manually by clicking on them in the file browser.any other method does not work.i tried to modify the mount options with gnome-disks they appear mounted then in the file browser , but are still inaccessible in wine or virtualbox.Any solution to make it auto at startup?Thank you, coming from Mint17.3 and i love this distro...&#xA;Using Loki stable&lt;/p&gt;&#xA;" OwnerUserId="14627" LastActivityDate="2023-12-11T12:00:35.097" Title="Problems in mounting external disks for wine and virtualbox" Tags="|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15505" PostTypeId="2" ParentId="15504" CreationDate="2018-05-10T03:44:57.047" Score="0" Body="&lt;p&gt;I found a solution in putting this in the startup files:&#xA;udisksctl mount -b /dev/s[whatever, a1,a2,b1...etc].&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System settings , Applications&gt;Startup&gt; + type in a custom command...Again , love this distro!&lt;/p&gt;&#xA;" OwnerUserId="14627" LastActivityDate="2018-05-10T03:44:57.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15506" PostTypeId="1" AcceptedAnswerId="15743" CreationDate="2018-05-10T14:28:50.683" Score="0" ViewCount="86" Body="&lt;p&gt;I'd like to buy an iso, but I don't want to use a creditcard, prefer to use PayPal. How to go about that?&lt;/p&gt;&#xA;" OwnerUserId="14632" LastActivityDate="2018-06-14T10:49:07.520" Title="Buying the OS with creditcard" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15507" PostTypeId="2" ParentId="15492" CreationDate="2018-05-10T17:35:45.623" Score="0" Body="&lt;p&gt;As GDog says, Android Studio works fine natively on Elementary OS and you don't need wine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove the existing icon you need to look for .desktop file with a matching name and remove it. This can be done via the terminal - .desktop files are usually found in /usr/share/applications/ If you want to do it via a GUI then grab AppEdit from the AppStore and find and delete the details in there.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-10T17:35:45.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15508" PostTypeId="2" ParentId="15486" CreationDate="2018-05-10T17:57:14.597" Score="0" Body="&lt;p&gt;Take a look at &lt;a href=&quot;https://github.com/atareao/Touchpad-Indicator&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/atareao/Touchpad-Indicator&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some bugs (like the cursor doesn't always return to view after you've stopped typing so you need to use the Ctrl button to highlight it assuming that you've turned on &quot;Reveal pointer&quot; in the &quot;Mouse &amp;amp; Touchpad&quot; settings first).&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-10T17:57:14.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15511" PostTypeId="1" AcceptedAnswerId="15517" CreationDate="2018-05-11T00:01:02.163" Score="0" ViewCount="70" Body="&lt;p&gt;I've set FileZilla to automatically download and open files when I double click them. Here are my settings for &quot;File editing&quot; on FileZilla:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IlIgH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IlIgH.png&quot; alt=&quot;File editing settings on FileZilla&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gedit is my default text editor in System Preferences, and I've even searched &lt;code&gt;usr/share/applications/defaults.list&lt;/code&gt; for references to Scratch and have found none. (Text files are set to be opened in Gedit.) I've tried &lt;code&gt;sudo apt remove scratch&lt;/code&gt;, but it appears not to be installed. Even still, when I double-click a &lt;code&gt;.txt&lt;/code&gt; file, it opens in Scratch. How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Text files open in Gedit when I select &quot;Always use default editor&quot;, but I want to avoid this because then other file types (&lt;code&gt;.wav&lt;/code&gt;, &lt;code&gt;.mp4&lt;/code&gt;, etc) open in Gedit as well.&lt;/p&gt;&#xA;" OwnerUserId="8741" LastActivityDate="2018-05-11T16:52:39.077" Title="Why does FileZilla still open .txt files in Scratch?" Tags="|files|ssh|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15514" PostTypeId="2" ParentId="13909" CreationDate="2018-05-11T08:13:26.857" Score="3" Body="&lt;p&gt;&lt;em&gt;(the following answer was provided by OP himself, but was originally included in the question body.)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Searching for a solution I found one within the Arch wiki and I wanted to share it with everyone. This typically affects machines with Intel sound chips.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i scratch-text-editor /etc/pulse/default.pa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Add line below to end of file, then save&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;load-module module-udev-detect tsched=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pulseaudio -k&#xA;pulseaudio --start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;I've added this to the &lt;a href=&quot;https://gist.github.com/PretzelJones/05ff9ae2af0570b86aaebc385c341428&quot; rel=&quot;nofollow noreferrer&quot;&gt;elC - elementary Combobulator&lt;/a&gt; project as well. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="84" LastActivityDate="2018-05-11T08:13:26.857" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15516" PostTypeId="2" ParentId="15511" CreationDate="2018-05-11T16:38:35.057" Score="0" Body="&lt;p&gt;This works for me &lt;code&gt;/usr/bin/scratch-text-editor&lt;/code&gt;. Good luck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PMRWw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PMRWw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3358" LastActivityDate="2018-05-11T16:38:35.057" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15517" PostTypeId="2" ParentId="15511" CreationDate="2018-05-11T16:44:27.527" Score="0" Body="&lt;p&gt;A solution that works for now is to set a custom filetype association within FileZilla:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JguK4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JguK4.png&quot; alt=&quot;Filetype associations menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8741" LastEditorUserId="8741" LastEditDate="2018-05-11T16:52:39.077" LastActivityDate="2018-05-11T16:52:39.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15520" PostTypeId="1" AcceptedAnswerId="15617" CreationDate="2018-05-11T19:01:08.700" Score="0" ViewCount="492" Body="&lt;p&gt;I've just installed Elementary OS 0.4.1 Loki and while I love the GUI there are a few things I need some help with, all related to the workspace / fullscreen application behavior (coming from MacOS):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is there a way to automatically put a fullscreen application in a separate workspace?&lt;/li&gt;&#xA;&lt;li&gt;Is there a way to have separate workspaces for each monitor? So I can switch workspaces only for the currently active monitor. &lt;/li&gt;&#xA;&lt;li&gt;Finally I noticed that fullscreen applications (Like Firefox) still have their title bar above them. I was wondering if their was a way to hide this (I did some googling and found &lt;a href=&quot;https://launchpad.net/maximus&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/maximus&lt;/a&gt; but I'm uncertain if this is the appropriate way to do this) ?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I hope that my questions are clear enough ( and not duplicates :) ), thanks in advance for anyone willing to help. &lt;/p&gt;&#xA;" OwnerUserId="14646" LastActivityDate="2018-05-25T19:33:40.057" Title="Fullscreen window behavior and workspaces" Tags="|macintosh|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15521" PostTypeId="1" CreationDate="2018-05-11T23:50:18.407" Score="2" ViewCount="283" Body="&lt;p&gt;I've uninstalled the stock music player (noise, I believe), however the controls above the volume slider remain. How do I uninstall them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried dconf-editor but couldn't find anything relevant.&lt;/p&gt;&#xA;" OwnerUserId="14644" LastActivityDate="2018-09-09T18:01:24.967" Title="How do I uninstall stock music indicator?" Tags="|wingpanel|indicator-sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15523" PostTypeId="1" CreationDate="2018-05-12T11:05:40.113" Score="1" ViewCount="64" Body="&lt;p&gt;After someone recommended to use the daily elementaryOS build on reddit to e.g. update the system, I went ahead with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and went for the upgrade afterwards. However the whole procedure left me with an OS without the Terminal which also can't be installed via AppCenter (gives me the &quot;installation post script error 2&quot; error message).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What options do I have? Do I have to go for a wipe?&lt;/p&gt;&#xA;" OwnerUserId="14636" LastEditorUserId="84" LastEditDate="2018-05-12T14:26:12.927" LastActivityDate="2018-05-12T14:26:12.927" Title="Where is my Terminal?" Tags="|pantheon-terminal|ppa|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15524" PostTypeId="2" ParentId="15521" CreationDate="2018-05-12T12:09:12.883" Score="1" Body="&lt;p&gt;Turns out it's just a matter of choosing the right player in the settings app.&lt;/p&gt;&#xA;" OwnerUserId="14644" LastActivityDate="2018-05-12T12:09:12.883" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15525" PostTypeId="1" CreationDate="2018-05-12T13:05:08.087" Score="1" ViewCount="201" Body="&lt;p&gt;i made a volume raise and lower keyboard shortcut then my original volume buttons stopped working i tried making them the shortcut and that wont work because i have to use more than one key in a shortcut cant be a single key , i made the shortcut ctrl+ raise volume button to increase volume now my question is can i edit this in terminal or in the file using scratch so that i can remove the ctrl button and just keep the raise volume button so that it would go back to normal ? i am using elementary please keep the answers detailed yet easy to follow i am new.&lt;/p&gt;&#xA;" OwnerUserId="14654" LastActivityDate="2018-12-26T00:02:35.533" Title="volume keyboard shortcut changed now i cant use my volume buttons" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15526" PostTypeId="1" CreationDate="2018-05-12T14:20:31.510" Score="0" ViewCount="674" Body="&lt;p&gt;I have installed Eclipse Oxygen from snapcraft (also attempted with the download from the official site). Eclipse launches, gets to about 25% complete on the load, and then elementary OS crashes, I lose all control over the system and I have to power-cycle my computer to restart. Is there any way to fix this?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS version: 0.4.1 Loki&lt;/li&gt;&#xA;&lt;li&gt;Eclipse version: Oxygen 4.7.3a&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14655" LastEditorUserId="84" LastEditDate="2018-05-12T14:27:51.970" LastActivityDate="2018-05-13T19:11:38.180" Title="Eclipse crashes elementary OS" Tags="|release-loki|eclipse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15528" PostTypeId="1" AcceptedAnswerId="15530" CreationDate="2018-05-13T14:12:05.457" Score="0" ViewCount="106" Body="&lt;p&gt;I need a new laptop. Any suggestions for a good laptop that runs well with Elementary? Anywhere to purchase one with Elementary installed? or do I need to buy a Windows machine and dual boot?&lt;/p&gt;&#xA;" OwnerUserId="14663" LastActivityDate="2018-05-21T12:06:13.940" Title="Need New Laptop, Suggestions?" Tags="|system|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15530" PostTypeId="2" ParentId="15528" CreationDate="2018-05-13T14:55:00.083" Score="0" Body="&lt;p&gt;You don't need to dual boot with Windows. Just burn elementary to a USB using etcher or rufus and boot from the USB. Install elementary and choose to wipe the disc rather than install alongside. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Dell Inspiron laptop and have never had any issues with any distribution. Dell have always been friends with Linux. Also Daniel Fore (elementary lead developer) uses a Lenovo Yoga with a HiDPI screen and they have been making great strides with HiDPI so you'll likely have a good experience with that as well.&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2018-05-13T14:55:00.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15531" PostTypeId="2" ParentId="15528" CreationDate="2018-05-13T19:04:03.430" Score="0" Body="&lt;p&gt;Lenovo laptops work pretty good with Linux. &#xA;On the other hand, I don’t recommend HP - I have one of these and they claim that there’s Linux support, but they doesn’t support my model.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2018-05-13T19:04:03.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15532" PostTypeId="2" ParentId="15526" CreationDate="2018-05-13T19:11:38.180" Score="2" Body="&lt;p&gt;I had similar problem.&#xA;I solved it with editing eclipse.ini file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to ~/eclipse/java-/eclipse/eclipse.ini&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open eclipse.ini with your favourite text editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;--launcher.GTK_version&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;2&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before &quot;--launcher.appendVmargs”&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save and try starting eclipse. : - ) &lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2018-05-13T19:11:38.180" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15533" PostTypeId="2" ParentId="15528" CreationDate="2018-05-13T19:18:38.427" Score="0" Body="&lt;p&gt;I recently bought a Gigabyte Sabre 17. Almost everything works with eOS. The nVidia GPU seems to have a windows-detecting routine built-in - Nvidia's own Linux installer can't even find it. But if you are not a gamer or a heavy video editor, Intel Graphics are perfectly fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are looking for value for money rather than bragging rights, I can recommend Gigabyte.&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-05-13T19:18:38.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15534" PostTypeId="2" ParentId="15528" CreationDate="2018-05-13T22:06:38.627" Score="3" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Any suggestions for a good laptop that runs well with Elementary?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Currently (2018), any new gen intel laptops have a good support with debian based distros (like Elementary), so it will run flawless.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The AMDs processors will run... well, the new ryzen is having a little trouble with debians distros &lt;a href=&quot;https://www.reddit.com/r/Amd/comments/6ox31y/what_is_the_state_of_ryzen_on_linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;as you can see here&lt;/a&gt;, but not something that would trouble (only if you are a dev or want go into advanced mode). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For video cards, &lt;strong&gt;I have&lt;/strong&gt; a better experience with Nvidia (and it's drivers), but RADEON cards are &lt;a href=&quot;https://www.makeuseof.com/tag/use-amd-nvidia-gpus-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;good too&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Anywhere to purchase one with Elementary installed?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I &lt;a href=&quot;https://itsfoss.com/elementary-litebook/&quot; rel=&quot;nofollow noreferrer&quot;&gt;saw a laptop&lt;/a&gt; in the begin of the year, it was an Elementary OS powered laptop with some additional programs installed by default, but if I was you, I would buy something more powerful and plug it with a bootable elementary usb for a clean install.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;do I need to buy a Windows machine and dual boot?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;No you don't, you can test it with a bootable USB drive without installing it OR you can install it in dual boot OR wipe it and make a full elementary os laptop. &lt;/p&gt;&#xA;" OwnerUserId="14669" LastActivityDate="2018-05-13T22:06:38.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15540" PostTypeId="1" CreationDate="2018-05-14T11:51:15.940" Score="1" ViewCount="242" Body="&lt;p&gt;Wifi works with the live USB. But once installed, I get nothing. I tried to &lt;code&gt;sudo modprobe wl&lt;/code&gt;, but I get a message that says&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Module wl not found in directory /lib/modules/4.13.-32-generic.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It's a XPS 9343.&lt;/p&gt;&#xA;" OwnerUserId="14678" LastEditorUserId="84" LastEditDate="2018-05-14T12:16:12.757" LastActivityDate="2018-05-14T14:38:38.033" Title="How can I get the wl driver to work?" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15541" PostTypeId="1" CreationDate="2018-05-14T13:51:17.090" Score="1" ViewCount="643" Body="&lt;p&gt;OS: Last Elementary with Phantenom&#xA;I get ovpn file. Now i want import it by 1-2 clicks but how it possible?&#xA;Network Settings\VPN+\&#xA;1. Import a saved VPN configuration - didnt help it says:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The file 'Germany_freeopenvpn_tcp.ovpn' could not be read or does not&#xA;  contain recognized VPN connection information&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Error: the plugin does not support import capability.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;BTW: network-manager-openvpn is already the newest version (1.1.93-1ubuntu1.1). &#xA;(installed as i understend.)&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Choose OpenVPN, here i can manual enter all settings from OVPN file. But its too long and i can make a mistake. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;So question is: what i need to install to import OVPN settings by 1-2 clicks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rethorical question why its not work from box???&lt;/p&gt;&#xA;" OwnerUserId="14679" LastActivityDate="2018-05-14T13:51:17.090" Title="OpenVPN connect by .openvpn file. How to import settings?" Tags="|openvpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15542" PostTypeId="2" ParentId="15540" CreationDate="2018-05-14T14:38:38.033" Score="1" Body="&lt;p&gt;I fixed the issue by using my iPhone as a personal hotspot (plugged in not wireless). Then I ran the software updater, it picked up on the Broadcom drivers. I installed it, rebooted and now my WiFi works.&lt;/p&gt;&#xA;" OwnerUserId="14678" LastActivityDate="2018-05-14T14:38:38.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15543" PostTypeId="2" ParentId="15227" CreationDate="2018-05-14T15:52:59.603" Score="1" Body="&lt;p&gt;I got this error resolved by running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/appcenter-not-working.2327/&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13042" LastActivityDate="2018-05-14T15:52:59.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15544" PostTypeId="1" CreationDate="2018-05-14T23:52:20.423" Score="0" ViewCount="117" Body="&lt;p&gt;I have disabled authorization after start PC. But after suspend it ask me password. How i can disable this dialogue? &#xA;It must be in Settings\Power - there is enough place for it. But there only 3 options.&lt;/p&gt;&#xA;" OwnerUserId="14679" LastActivityDate="2019-12-06T09:02:40.390" Title="Ask password after suspend" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15545" PostTypeId="2" ParentId="15544" CreationDate="2018-05-15T00:40:46.400" Score="1" Body="&lt;p&gt;Just go System Settings \ Security &amp;amp; Privacy&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YpOGI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YpOGI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: if developers read this! Please copy this settings to &quot;Power&quot; menu! Its like Keyboards and Shortcuts for switching layouts must be in one place for quick access!&lt;/p&gt;&#xA;" OwnerUserId="14679" LastActivityDate="2018-05-15T00:40:46.400" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15547" PostTypeId="2" ParentId="15506" CreationDate="2018-05-15T07:23:52.507" Score="1" Body="&lt;p&gt;You can download it free of charge&lt;/p&gt;&#xA;" OwnerUserId="14601" LastActivityDate="2018-05-15T07:23:52.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15549" PostTypeId="1" CreationDate="2018-05-15T11:50:43.977" Score="1" ViewCount="50" Body="&lt;p&gt;I've been using elementary OS for about a month, and the problem of &lt;code&gt;kswapd0&lt;/code&gt; using 100% of the CPU appeared both on my PC and Netbook. Is there any way to fix it? I've installed the 4.15 kernel and thought that the new kernel would help, but still nothing. I even disabled swap cause I use an SSD, but it still eats my CPU after some time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone else have this problem or I am the chosen one?&lt;/p&gt;&#xA;" OwnerUserId="14689" LastEditorUserId="84" LastEditDate="2018-05-15T12:27:49.133" LastActivityDate="2018-05-15T12:27:49.133" Title="kswapd0 problem" Tags="|release-loki|kernel|swap|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15550" PostTypeId="1" CreationDate="2018-05-15T13:14:30.763" Score="2" ViewCount="385" Body="&lt;p&gt;I constantly have problems with my battery because it discharges very fast. This problem only occurs in elementary OS. In Windows 8 the management of the battery is much better. I have already installed the battery management application from the AppCenter, but the battery still has the same problem. My laptop is a Lenovo Z40/70. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="14692" LastEditorUserId="84" LastEditDate="2018-05-15T13:43:51.937" LastActivityDate="2018-05-15T16:14:31.683" Title="Why my laptop battery is discharged so fast with Elementary OS?" Tags="|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15551" PostTypeId="2" ParentId="15550" CreationDate="2018-05-15T13:55:31.643" Score="2" Body="&lt;p&gt;I would recommend installing TLP which will help conserve battery power. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:linrunner/tlp&#xA;sudo apt update&#xA;sudo apt install -y tlp tlp-rdw&#xA;sudo tlp start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Though if you haven't yet set elementary up to install from PPAs, run the following command first:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y software-properties-common python3-software-properties python-software-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7492" LastEditorUserId="7492" LastEditDate="2018-05-15T16:14:31.683" LastActivityDate="2018-05-15T16:14:31.683" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15552" PostTypeId="1" AcceptedAnswerId="16207" CreationDate="2018-05-15T15:06:37.513" Score="-1" ViewCount="374" Body="&lt;p&gt;Experiencing odd behavior only in my Windows 10 Guest.&#xA;When I click the start menu, no keyboard output goes to the VM.&#xA;I can still click on applications with the mouse.&#xA;I've also seen this in the VPN creation screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Windows 7 VM and have not had this happen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the latest version of VirtualBox and Extensions.&#xA;I've also tried switching to full screen mode and enabling/disabling Auto Capture Keyboard.&lt;/p&gt;&#xA;" OwnerUserId="14141" LastEditorUserId="84" LastEditDate="2018-05-15T21:32:00.450" LastActivityDate="2019-01-03T12:59:03.947" Title="VirtualBox Windows 10 Guest no keyboard on Start Menu" Tags="|keyboard|virtualbox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15554" PostTypeId="1" CreationDate="2018-05-15T18:51:59.710" Score="0" ViewCount="252" Body="&lt;p&gt;I'm installing elementary OS for the first time. I'm using a MacBook 2008 unibody which had El Capitan as the OS. Installation was proceeding satisfactorily until I got this message: &quot;Please unlock disk sda3_crypt&quot;&#xA;What does this mean and how do I deal with it?&lt;/p&gt;&#xA;" OwnerUserId="14695" LastEditorUserId="242" LastEditDate="2018-10-13T02:15:57.170" LastActivityDate="2018-10-13T02:15:57.170" Title="How to unlock a disk during installation?" Tags="|system-installation|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15555" PostTypeId="2" ParentId="15554" CreationDate="2018-05-15T20:50:53.597" Score="1" Body="&lt;p&gt;The question was solved by the original poster. I'm moving that content to an answer, to properly match the Q&amp;amp;A model:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I've got it sorted. I just had to use the security password I entered on setup.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="84" LastActivityDate="2018-05-15T20:50:53.597" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15556" PostTypeId="1" CreationDate="2018-05-15T20:52:14.057" Score="0" ViewCount="3378" Body="&lt;p&gt;I'm new to Linux so please bear with me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just installed 0.4.1 Loki from a USB drive and whereas the WiFi worked when I booted up from the USB drive, it doesn't after full installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I go into &lt;code&gt;System Settings &amp;gt; Network&lt;/code&gt;, it doesn't show any WiFi networks in the left hand column. However, if I click on &lt;code&gt;Edit Connections&lt;/code&gt;, my network appears in the drop down box. But I can't seem to activate it in any way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="14695" LastEditorUserId="14940" LastEditDate="2019-01-01T17:17:10.240" LastActivityDate="2019-02-24T10:01:10.383" Title="Wifi not working after installation" Tags="|release-loki|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15558" PostTypeId="1" CreationDate="2018-05-16T07:40:08.973" Score="1" ViewCount="132" Body="&lt;p&gt;I regularly need to extract ZIP archives that contain characters that are encoded in Chinese (GB18030). The slow way of doing this is to open the folder in a terminal and entering the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ unzip -O GB18030 foo.zip&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to create a contractor contract that will allow me to unzip files from the right-click menu in pantheon-files. I placed the following contract (unzip-chinese.contract) in /usr/share/contractor/&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Extract GB18030&#xA;Icon=extract-archive&#xA;Description=Extract the GB18030 encoded archive and quit&#xA;MimeType=application/zip;&#xA;Exec=unzip -O GB18030 %f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6q3Vd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6q3Vd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anybody tell me why when I select this option from the right-click menu, nothing happens?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cElEb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cElEb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="236" LastActivityDate="2018-05-16T07:40:08.973" Title="Contractor contract doesn't work in pantheon-files" Tags="|pantheon|files|contract|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15559" PostTypeId="2" ParentId="7550" CreationDate="2018-05-16T15:22:30.170" Score="1" Body="&lt;p&gt;The simplest solution is to add the following two lines in &lt;code&gt;/usr/bin/dropbox&lt;/code&gt;, just after &lt;code&gt;import os&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;os.environ['XDG_CURRENT_DESKTOP']=&quot;Unity&quot;&#xA;os.environ['QT_STYLE_OVERRIDE']=&quot;''&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14701" LastEditorUserId="84" LastEditDate="2018-05-17T09:47:43.263" LastActivityDate="2018-05-17T09:47:43.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15561" PostTypeId="1" AcceptedAnswerId="16655" CreationDate="2018-05-16T20:26:46.447" Score="1" ViewCount="907" Body="&lt;p&gt;when i watch video in google chrome at full screen mode its stuck and not more working, in normal size its work without any issues but at full screen size freeze chrome and desktop!&#xA;there is no problem with other browser like Mozilla Firefox and Epiphany&#xA;i well use ubuntu 18.04 with pantheon desktop (Elementary OS 5 Juno) and google chrome 66.0.3359.181 (Official Build) (64-bit)&#xA;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="14536" LastActivityDate="2021-01-24T19:58:47.380" Title="google chrome stuck when watching video at full screen size" Tags="|google-chrome|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="15563" PostTypeId="2" ParentId="10276" CreationDate="2018-05-17T11:07:17.423" Score="1" Body="&lt;p&gt;I've had problems with my trackpad as well and posted my solution on reddit which you can check here: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/8fte94/question_regarding_trackpad_on_xiami_mi_12/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link to Reddit&lt;/a&gt;. Not sure if it will solve your problem though!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically the command I've used looks like this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;all at once and not split by a new line.&lt;/p&gt;&#xA;" OwnerUserId="14636" LastActivityDate="2018-05-17T11:07:17.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15564" PostTypeId="1" CreationDate="2018-05-17T12:08:04.653" Score="2" ViewCount="1270" Body="&lt;p&gt;I am trying to install latest GIMP on Loki 0.4.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But every time I try to download the packages I get error like the following :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package pythonany&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note : I am trying to install by using the following commands :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:otto-kesselgulasch/gimp&#xA;&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;getdebs.sh&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;package=gimp&#xA;&#xA;apt-cache depends &quot;$package&quot; | grep Depends: &amp;gt;&amp;gt; deb.list&#xA;&#xA;sed -i -e 's/[&amp;lt;&amp;gt;|:]//g' deb.list&#xA;&#xA;sed -i -e 's/Depends//g' deb.list&#xA;&#xA;sed -i -e 's/ //g' deb.list&#xA;&#xA;filename=&quot;deb.list&quot;&#xA;&#xA;while read -r line&#xA;do&#xA;    name=&quot;$line&quot;&#xA;    apt-get download &quot;$name&quot;&#xA;done &amp;lt; &quot;$filename&quot;&#xA;&#xA;apt-get download &quot;$package&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for downloading them for offline install.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Maccer&lt;/strong&gt;&#xA;: Thanks for replying. I was quite anxious.&#xA;I am totally new to Linux. Elementary OS is my first Linux distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, I can install GIMP 2.8.16 without that ppa.&#xA;But I should be able to install GIMP 2.8.22 using that ppa.&#xA;So I want to install GIMP 2.8.22 or later in any possible ways. [ Except compile from source ]&#xA;The problem is the following :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I should be able to install GIMP 2.10.0 using that ppa.&lt;/li&gt;&#xA;&lt;li&gt;But even with the ppa I can only get access to GIMP 2.8.22.&lt;/li&gt;&#xA;&lt;li&gt;2.8.22 is no problem.&lt;/li&gt;&#xA;&lt;li&gt;I just want to use latest 2.8.x if I will get access only to older&#xA;versions.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I tried to install 2.8.22 and got that error :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package pythonany&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where can I get &quot;pythonany&quot; ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is 16.04.3 supported anymore ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does the repository offer 2.8.16 instead of 2.8.22?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, I just want to use at least 2.8.22 or 2.10.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do that?&lt;/p&gt;&#xA;" OwnerUserId="14710" LastEditorUserId="8" LastEditDate="2018-12-04T21:26:57.253" LastActivityDate="2023-12-09T10:04:25.533" Title="Problem Installing GIMP?" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15565" PostTypeId="2" ParentId="15564" CreationDate="2018-05-17T15:56:45.147" Score="0" Body="&lt;p&gt;Gimp is available from the ubuntu repos already, so you don't need any ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you execute &lt;code&gt;apt download gimp&lt;/code&gt; it will download a deb file of gimp to the folder where you have terminal open (usually /home).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend also to delete that ppa if you don't need it. Adding ppas is a security risk to your system. You can do so with &lt;code&gt;sudo add-apt-repository --delete ppa:otto-kesselgulasch/gimp&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you need a newer version of gimp, for example 2.10, you can download it from &lt;a href=&quot;https://download.gimp.org/mirror/pub/gimp/v2.10/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. That's the official site of the gimp organization. You need to download &lt;code&gt;gimp-2.10.0.tar.bz2&lt;/code&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since it's a compressed package and you probably don't want to install it from source I'm going to explain an alternative way of doing it. With this you are going to convert that file to a .deb file and then you can install it using apt while still receiving updates if a more recent version of gimp is available on the ubuntu repos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First you need to install alien with &lt;code&gt;sudo apt install alien&lt;/code&gt;. Now you go to the folder where you've downloaded that &lt;code&gt;gimp*.tar.bz2&lt;/code&gt; package and you press right click &gt; open on terminal. Execute &lt;code&gt;sudo alien -d gimp*&lt;/code&gt;, that's going to create a .deb file, may take some minutes to complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now that you have a .deb file you can install it with &lt;code&gt;sudo apt install -f ./gimp*.deb&lt;/code&gt;. When it's finished installing you can delete the .deb package with &lt;code&gt;sudo rm gimp*.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With this you should have the lastest stable gimp version. This procedure can also be applied to any other app that comes in a .tar.bz or similar package.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2018-05-19T09:59:55.720" LastActivityDate="2018-05-19T09:59:55.720" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15566" PostTypeId="2" ParentId="10288" CreationDate="2018-05-17T15:59:54.383" Score="0" Body="&lt;p&gt;This worked for me: I held down the orange wifi button above the keyboard (this is on a Compaq) near the power switch and toggled the wifi switch in network settings.  Wifi button turned blue and wifi options showed up in Network Settings.  Not sure it will work for everyone, but worked for me!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW, this relates to the answer by Subham Patel.&lt;/p&gt;&#xA;" OwnerUserId="14706" LastEditorUserId="84" LastEditDate="2018-05-17T23:35:56.553" LastActivityDate="2018-05-17T23:35:56.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15567" PostTypeId="2" ParentId="14447" CreationDate="2018-05-17T16:09:20.643" Score="1" Body="&lt;p&gt;My current workaround to elementary OS not auto-mounting the webDAV server using Pantheon file browser:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create root folder on server containing all data.&lt;/li&gt;&#xA;&lt;li&gt;Bookmark root folder in the file browser.&lt;/li&gt;&#xA;&lt;li&gt;WebDAV server is automatically connected on first use of the bookmark after reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I am still looking for a better solution. But anyway, this way I work around the issue that I was not able to bookmark the webDAV server itself in Pantheon.&lt;/p&gt;&#xA;" OwnerUserId="14705" LastEditorUserId="84" LastEditDate="2018-05-17T23:33:25.373" LastActivityDate="2018-05-17T23:33:25.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15568" PostTypeId="2" ParentId="15556" CreationDate="2018-05-17T17:52:15.593" Score="0" Body="&lt;p&gt;I had the same problem with a MacBook Pro late 2008.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to install the firmware driver for the broadcom network-adapter manually. I found it out, because the &lt;code&gt;dmesg&lt;/code&gt; command gave me the reason and the install guide of elementary OS points to the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install without a network connection I mounted the install media and followed the instructions for the bcmwl-kernel-source &lt;a href=&quot;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx#b43%20-%20No%20Internet%20access&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally it works.&lt;/p&gt;&#xA;" OwnerUserId="14708" LastEditorUserId="84" LastEditDate="2018-05-17T23:32:05.330" LastActivityDate="2018-05-17T23:32:05.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15571" PostTypeId="1" CreationDate="2018-05-17T20:39:57.177" Score="1" ViewCount="52" Body="&lt;p&gt;On my old Compaq Presario F700 (NVidia GeForce 7000/610M C67), display is corrupted from start. That means, resolution isn't a standard VGA one, as other distros allow installation. How could I install Elementary, then ?&lt;/p&gt;&#xA;" OwnerUserId="14712" LastEditorUserId="14712" LastEditDate="2018-05-21T08:10:08.830" LastActivityDate="2018-05-21T08:50:07.570" Title="Display corruption at system installation" Tags="|system-installation|display|nvidia|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="15572" PostTypeId="1" AcceptedAnswerId="15577" CreationDate="2018-05-17T21:24:22.940" Score="1" ViewCount="69" Body="&lt;p&gt;I've installed Loki and toggled the &quot;Log in Automatically&quot; switch on. But when I restart the system, it still shows the standard log in screen and asks for the password. When I go back to User Accounts, it is still toggled on. So it says to be working, but not. &lt;code&gt;lightdm.conf&lt;/code&gt; just has:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Seat:*]&#xA;autologin-user=sdwhwk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;user is an admin.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="14713" LastEditorUserId="84" LastEditDate="2018-05-17T23:40:08.920" LastActivityDate="2018-05-19T13:02:57.187" Title="Automatic Login on Loki will not work" Tags="|release-loki|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15574" PostTypeId="2" ParentId="15363" CreationDate="2018-05-18T09:59:49.600" Score="2" Body="&lt;p&gt;I have a Fritz!box and I didn't use the NAS, until now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how I got into the NAS today.&#xA;Just click on &quot;Entire Network&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/RXN0t.png&quot; alt=&quot;EntireNetwork&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the FRITZ-NAS, and a &quot;Wifi&quot;-icon appears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mx9qu.png&quot; alt=&quot;Wireless Icon of Fritz-NAS&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And when you open this, a dialog box appears and you can fill in your credentials.&#xA;These are the credentials you gave in the setup of MyFritz.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/U2yeg.png&quot; alt=&quot;Dialog for credentials&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After login, your files on the NAS appear.&lt;/p&gt;&#xA;" OwnerUserId="9548" LastEditorUserId="84" LastEditDate="2018-05-18T12:59:57.153" LastActivityDate="2018-05-18T12:59:57.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15576" PostTypeId="2" ParentId="13068" CreationDate="2018-05-19T11:23:07.173" Score="0" Body="&lt;p&gt;It may be due to the Intel processor. I had a similar experience with a laptop with an Intel processor. What I did was open the terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&lt;/code&gt; to &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash intel_idle.max_cstate=1&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save it (&lt;code&gt;Ctrl+O&lt;/code&gt;), exit (&lt;code&gt;Ctrl+X&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this helps. And make sure that the OS is updated as well.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="84" LastEditDate="2018-05-19T11:54:29.050" LastActivityDate="2018-05-19T11:54:29.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15577" PostTypeId="2" ParentId="15572" CreationDate="2018-05-19T13:02:57.187" Score="0" Body="&lt;p&gt;According to &lt;a href=&quot;https://wiki.archlinux.org/index.php/LightDM#Enabling_autologin&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wiki&lt;/a&gt;, your user must be part of the &quot;autologin&quot; group.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo groupadd -r autologin&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo gpasswd -a sdwhwk autologin&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="13867" LastActivityDate="2018-05-19T13:02:57.187" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15579" PostTypeId="1" CreationDate="2018-05-20T08:41:50.373" Score="1" ViewCount="102" Body="&lt;p&gt;In windows and Ubuntu (and other distro's) it's possible to assign different power management settings for when on battery power vs plugged.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, I'd like the PC to sleep when i close the lid on battery power, but do nothing if I'm connected to a charger.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it even possible?&lt;/p&gt;&#xA;" OwnerUserId="14729" LastActivityDate="2023-12-17T20:02:05.233" Title="Is it possible to configure different power management settings for plugged\unplugged?" Tags="|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15581" PostTypeId="1" CreationDate="2018-05-20T11:45:25.177" Score="1" ViewCount="25" Body="&lt;p&gt;I enter password. It's ok.&#xA;I see empty desktop with only background picture.&#xA;I wait for about 1-2 minutes and only after it the dock line and high line with time and applications become visible and available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="14730" LastActivityDate="2018-05-20T11:45:25.177" Title="Long boot after sing in" Tags="|boot|greeter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15582" PostTypeId="1" CreationDate="2018-05-20T15:51:33.660" Score="1" ViewCount="381" Body="&lt;p&gt;I'm trying to connect ElementaryOS to a Windows laptop and nothing I've tried has worked. Even running gvfs-mount smb://192.168.1.x from the terminal results in &quot;Error mounting location: Failed to retrieve share list from server: Connection timed out&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should Samba work out of the box in ElementaryOS or are there post-install steps? I know this share works because I can connect to it on my laptop which is running Manjaro. Its just ElementaryOS that refuses to connect to it.&lt;/p&gt;&#xA;" OwnerUserId="14732" LastActivityDate="2018-05-20T15:51:33.660" Title="Connect to Windows via Samba - instant timeouts" Tags="|networking|samba|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15583" PostTypeId="1" CreationDate="2018-05-20T17:51:57.627" Score="1" ViewCount="519" Body="&lt;p&gt;I've installed Elementary OS on HP &lt;a href=&quot;https://support.hp.com/us-en/document/c05666796&quot; rel=&quot;nofollow noreferrer&quot;&gt;15-bw011dx&lt;/a&gt; (UEFI/GPT, Secure boot OFF). Ethernet works but the wireless nic does not appear in SYSTEM SETTINGS/NETWORK.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In a terminal I entered the following command per &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8743/i-cant-see-any-wireless-setting-in-loki-0-4-please-help&quot;&gt;these&lt;/a&gt; instructions:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -C network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The terminal returned the identification of my ethernet adapter (RTL8111/8168/8411), etc and its status. It went on to describe my wireless nic in this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;fff&#xA;*-network UNCLAIMED&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It recognized the controller as Realtek. Laptop driver download (Win) page is &lt;a href=&quot;https://support.hp.com/us-en/drivers/selfservice/hp-15-bw000-laptop-pc/15551418/model/17850904&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed &lt;a href=&quot;http://nealbuerger.com/2018/02/things-to-do-after-installing-elementary-os-0-4-1-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; instructions so I could add the ppa named in &lt;a href=&quot;https://akshaycv006.wordpress.com/2017/01/12/installing-realtek-rtl8723be-driver-for-ubuntu-debian-or-fedora/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; instructions. So in order I entered the following commands into a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&#xA;sudo add-apt-repository ppa:hanipouspilot/rtlwifi&#xA;sudo apt-get update&#xA;sudo apt-get install rtlwifi-new-dkms linux-firmware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I then restarted and still the wireless adaptor is absent from SYSTEM SETTINGS/NETWORK and the interface still appears &quot;UNCLAIMED&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://akshaycv006.wordpress.com/2017/01/12/installing-realtek-rtl8723be-driver-for-ubuntu-debian-or-fedora/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; instructions I should issue the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-$(uname -r) gcc g++ build-essential dkms git&#xA;sudo reboot&#xA;cd rtlwifi_new-rock.new_btcoex&#xA;make&#xA;sudo make install&#xA;sudo modprobe -rv rtl8723be&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, on entering the third command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd rtlwifi_new-rock.new_btcoex&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: cd: rtlwifi_new-rock.new_btcoex: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To recap: I would like to install the driver for Realtek RTL8723BE in Elementary OS (HP 15-bw011dx).&lt;/p&gt;&#xA;" OwnerUserId="14733" LastActivityDate="2018-11-22T10:00:36.493" Title="How do I install RTL8723BE driver in Elementary OS (4.13.0-41)?" Tags="|release-loki|wifi|software-installation|drivers|hp|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15587" PostTypeId="2" ParentId="14872" CreationDate="2018-05-21T06:11:35.670" Score="-1" Body="&lt;p&gt;XP-Pen tablets do not work on Linux full stop. Be a hero and write a driver for it; or else weigh the value of your time spent doing that versus the cost of buying a Wacom tablet that will work.&lt;/p&gt;&#xA;" OwnerUserId="14735" LastActivityDate="2018-05-21T06:11:35.670" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15588" PostTypeId="2" ParentId="15571" CreationDate="2018-05-21T08:50:07.570" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;on such an old PC with an amd64 CPU &lt;em&gt;but&lt;/em&gt; with a 32 bits BIOS and a 32 bits NVidia card, stay on a &lt;strong&gt;x86 32 bits installation of Linux&lt;/strong&gt;; otherwise, the NVidia-304 driver couldn't work correctly, and you couldn't get any graphical acceleration.&lt;/li&gt;&#xA;&lt;li&gt;At early start of installation, a little &lt;strong&gt;pictogram for accessibility&lt;/strong&gt; shows at bottom of the screen; press [return] at this time: a menu shows. Pressing [tab] allows editing of the menu commands; replace &quot;&lt;strong&gt;quiet splash&lt;/strong&gt;&quot; with &quot;&lt;strong&gt;nomodeset&lt;/strong&gt;&quot;, which prevents the installer of choosing the better available resolution (the one who flickered the screen). Validate with [return]. Install will then run in 1024x768, without problem. Beware: in Kernel Options (F6), there is a &quot;nomodeset&quot; option; it doesn't seem to work, and doesn't prevent screen corruption.&lt;/li&gt;&#xA;&lt;li&gt;Once your Linux distribution installed (Elementary as well as any other), install the nvidia-304 legacy (non-free) driver (use Synaptic, or even the software/driver manager, or YasT on SuSE). You should endly get the native 1280x800 resolution, with some graphical acceleration.&lt;/li&gt;&#xA;&lt;li&gt;nota: some distros allow choice of another graphical pilote at install time; it should only work, if the distro isnt' a amd64 one installing on a too old PC with 32 bits internal components (BIOS, cards...). Some distros only provide the grub menu at installation start, reached by pressing (just once!) F9 (if pressed twice, start process resumes!). You can edit the command by pressing &quot;e&quot; and launch it by pressing F10, after replacing of &quot;quiet splash&quot; by &quot;nomodeset&quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="14712" LastActivityDate="2018-05-21T08:50:07.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15589" PostTypeId="2" ParentId="15528" CreationDate="2018-05-21T12:06:13.940" Score="0" Body="&lt;p&gt;Dell XPS 13 - Developer Edition - designed with Ubuntu in mind, hence elementary works OOB :)&lt;/p&gt;&#xA;" OwnerUserId="14739" LastActivityDate="2018-05-21T12:06:13.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15592" PostTypeId="1" AcceptedAnswerId="18193" CreationDate="2018-05-21T17:58:26.100" Score="0" ViewCount="216" Body="&lt;p&gt;I installed elementary OS some time ago and I must say I really like the 'flow' of it. Although I have unfortunately some technical issues. One of them is the mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Problem: When I start the PC the mousewheel does not work. I have to unplug it and reinsert it. Then everything works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The mouxe is the X7 Spider. lsusb after reinserting it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 005 Device 004: ID 09da:9090 A4Tech Co., Ltd. XL-730K / XL-750BK / XL-755BK Mice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;dmesg | grep mouse&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    1.229382] mousedev: PS/2 mouse device common for all mice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So far I have no idea what else I could post to analyze this issue further. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have any hints for me to look at this issue besides unplugging it or how to solve it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Andy&lt;/p&gt;&#xA;" OwnerUserId="14740" LastActivityDate="2019-02-05T15:52:39.797" Title="Mousewheel not working after starting" Tags="|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15594" PostTypeId="1" CreationDate="2018-05-22T00:43:36.313" Score="1" ViewCount="910" Body="&lt;p&gt;I can't make elementary OS boot after a fresh install. I tried to reinstall it 3 times but always end up with the same error. The only thing I can think of is faulty new SDD which hasn't been tested yet. Google isn't much of a help in this case. &#xA;My laptop is a cheap Chinese ezBook 3 pro, but it worked OK with different SSD and Linux Mint installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mhwxI.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="14742" LastEditorUserId="84" LastEditDate="2018-05-22T09:51:27.980" LastActivityDate="2019-04-24T16:01:10.233" Title="First boot failing with &quot;Can't find /root in /etc/fstab&quot;" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15596" PostTypeId="2" ParentId="8544" CreationDate="2018-05-22T12:32:18.143" Score="1" Body="&lt;p&gt;Elementary OS DOES support touch. I have Dell XPS 15 with a touch screen and am running Loki without any special touch modifications. It all works as you would expect (including being annoying when someone touches your screen). I can click, drag, move and do so in combination with modifier keys. I'll be clicking on the &quot;Post Your Answer&quot; by touching the screen...&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-05-22T12:32:18.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15597" PostTypeId="1" CreationDate="2018-05-23T05:42:12.210" Score="0" ViewCount="247" Body="&lt;p&gt;I have two users on my PC, one desktop environment looks similar to a standard eOS except the icons are MATE-like and some icons are missing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other user's desktop environment looks like MATE:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/z8WZB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/z8WZB.png&quot; alt=&quot;System:About MAte&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output of lsb_release -a &#xA;&lt;a href=&quot;https://i.stack.imgur.com/SrMpk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SrMpk.png&quot; alt=&quot;Terminal window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried updating and re-installing the desktop with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All help appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe unrelated info:&#xA;I am running Windows 10 and elementary OS dual-boot to try escape the windows jail, I have managed not to boot into windows for over three months and am very happy with eOS and have installed it on my kids PC's as their default OS. Runs very well and all the hardware/dongles etc work just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disclaimer: I am a NOOB&lt;/p&gt;&#xA;" OwnerUserId="14746" LastActivityDate="2018-12-28T19:02:30.637" Title="elementary OS has the MATE DE" Tags="|release-loki|ubuntu|desktop-environment|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15603" PostTypeId="2" ParentId="15121" CreationDate="2018-05-24T14:12:52.030" Score="0" Body="&lt;p&gt;Sry for wrong english if any..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By clicking at applications tab..&#xA; there is a pop up menu/window..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on which you can search for software and updates.. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;by clicking at software and update just go for other software (scnd option from the left at the row)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncheck the first option i.e. cdrom:[elementary OS 0.4.1........&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it.. &lt;/p&gt;&#xA;" OwnerUserId="14744" LastActivityDate="2018-05-24T14:12:52.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15606" PostTypeId="1" CreationDate="2018-05-24T16:46:32.177" Score="1" ViewCount="91" Body="&lt;p&gt;My question is 2 fold.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I change the amount of time that notifications remain visible, i.e once they pop up in the top right, I want them to stay there longer before disappearing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, can this be done at the application level. I.e Can I tweak appearance time for each application individually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated!&lt;/p&gt;&#xA;" OwnerUserId="14764" LastActivityDate="2019-06-15T22:02:35.280" Title="Change notification appearance timer" Tags="|notifications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15607" PostTypeId="1" CreationDate="2018-05-24T17:39:58.363" Score="1" ViewCount="151" Body="&lt;p&gt;I consider vlc player to be the goto player (even though now im starting to like the native elementary OS video player). When i make it full screen some part of video is getting lost. &lt;/p&gt;&#xA;" OwnerUserId="14765" LastActivityDate="2018-11-21T07:01:15.213" Title="VLC player - Video lost in fullscreen" Tags="|vlc|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15608" PostTypeId="2" ParentId="15607" CreationDate="2018-05-24T20:14:05.100" Score="2" Body="&lt;p&gt;Unmaximise the vlc window, then go to fullscreen.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-05-24T20:14:05.100" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15609" PostTypeId="1" AcceptedAnswerId="15632" CreationDate="2018-05-24T21:22:28.810" Score="0" ViewCount="62" Body="&lt;p&gt;I have Loki 0.4.1 installed with Firefox 60.0.1. I have some folder created in my download folder which have spaces in them, if I download to any of these folders and then try and select open container folder, or click to open the file directly, it replaces the location in Pantheon with a Zero where there was a space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For an example I have a folder inside my Downloads folder called Linux Software, when selecting open containing folder inside firefox will try and navigate to Linux0Software&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Up until this morning I was using a different OS yet with the same Firefox version, here there was no issue at all.&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2018-05-26T17:29:38.933" Title="Firefox open containing folder cannot find location" Tags="|pantheon-files|firefox|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:03:04.997" ContentLicense="CC BY-SA 4.0" />
  <row Id="15611" PostTypeId="2" ParentId="14796" CreationDate="2018-05-25T03:00:42.663" Score="0" Body="&lt;p&gt;All William did above there is install the version of HPLIP that is already bundled with Elementary. It can be installed using Elementary AppCenter instead of adding Aptitude to confuse things.&#xA;You can see that HPLIP is at version 3.16.3 from the screenshot of Aptitude, not 3.17.11.&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-05-25T03:00:42.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15612" PostTypeId="2" ParentId="7521" CreationDate="2018-05-25T03:11:22.880" Score="0" Body="&lt;p&gt;This has worked for me in the past. I run Unifi Controller on this desktop and I didn't want the system to update the version I was running due to some issues that I wanted to see get worked out first.  &quot;sudo apt-mark hold unifi&quot; did exactly that and I updated everything else for a few weeks like normal until I was ready to update unifi. &quot;sudo apt-mark unhold unifi&quot; released the hold.&#xA;&quot;sudo apt-mark showhold&quot; to check it.&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-05-25T03:11:22.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15613" PostTypeId="2" ParentId="15307" CreationDate="2018-05-25T08:53:23.093" Score="0" Body="&lt;p&gt;It turned out that it wasn't the fault of Evolution. I had to trust my friend's GPG keys (&lt;code&gt;CC461E31&lt;/code&gt;) for encryption to work. This would be a solution. Another will be, and I quote from mailing list,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Configure evolution not to check that and instead assume that if you&#xA;have a OpenPGP key in your keyring for a given email, it should encrypt&#xA;the messages for that recipient using that key:&#xA;Edit → Preferences → (Choose your account) → Edit → Security → Check&#xA;Always trust keys in my keyring when encrypting&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-05-25T08:53:23.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15616" PostTypeId="1" CreationDate="2018-05-25T18:08:04.357" Score="3" ViewCount="170" Body="&lt;p&gt;On my laptop I'm only holding high sensitive data. I want to disable the OS from going online or connecting to bluetooth devices at all and indefinetly. I want it to be impossible to go online with the device, maybe by deleting the networking drivers or so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is that possible?&lt;/p&gt;&#xA;" OwnerUserId="14770" LastActivityDate="2018-12-08T07:28:10.807" Title="How can I disable networking and bluetooth indefinetly?" Tags="|wifi|networking|bluetooth|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15617" PostTypeId="2" ParentId="15520" CreationDate="2018-05-25T19:33:40.057" Score="0" Body="&lt;p&gt;I found out that the only thing you have to do is bind the keybinding for fullscreen (for example I bound it to command + F) once you hit this it has the same behavior as Mac. Putting the application in a separate workspace. Sadly there is no way I've been able to find to have each screen have it's own workspaces which can be switch separately. &lt;/p&gt;&#xA;" OwnerUserId="14646" LastActivityDate="2018-05-25T19:33:40.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15618" PostTypeId="2" ParentId="9206" CreationDate="2018-05-25T23:32:08.410" Score="1" Body="&lt;p&gt;Install Windows Management control or wmctrl:&#xA;&lt;code&gt;sudo apt install wmctrl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now, typing the following command in the terminal will show the desktop:&#xA;&lt;code&gt;wmctrl -k on&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is OK, but it is easier with a keyboard shortcut. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open System Settings-&gt;Keyboard (or search keyboard in Applications for Loki 0.4 Elementary OS and possibly other distributions)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to 'Shortcuts tab&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to 'Custom'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the '+' and type &lt;code&gt;wmctrl -k on&lt;/code&gt; and 'Enter'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The shortcut will show is 'Disabled' on the right &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on 'Disabled' and click on the shortcut you like for example the 'Windows' button + D, also known as 'Super + D'&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xtgPP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xtgPP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Try it: click you shortcut. You should see the desktop&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That is it. You are done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: this answer is basically the same as &lt;a href=&quot;https://elementaryos.stackexchange.com/users/12813/alexandre-cavalcante&quot;&gt;Alex&lt;/a&gt;'s above, I just added more detailed steps (and tried to +1 his, but not enough reputation :)&lt;/p&gt;&#xA;" OwnerUserId="14637" LastActivityDate="2018-05-25T23:32:08.410" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15619" PostTypeId="2" ParentId="396" CreationDate="2018-05-25T23:37:58.267" Score="1" Body="&lt;p&gt;Install Windows Management control or wmctrl:&#xA;&lt;code&gt;sudo apt install wmctrl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now, typing the following command in the terminal will show the desktop:&#xA;&lt;code&gt;wmctrl -k on&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is OK, but it is easier with a keyboard shortcut. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open System Settings-&gt;Keyboard (or search keyboard in Applications for Loki 0.4 Elementary OS and possibly other distributions)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to 'Shortcuts tab&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to 'Custom'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the '+' and type &lt;code&gt;wmctrl -k on&lt;/code&gt; and 'Enter'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The shortcut will show is 'Disabled' on the right &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on 'Disabled' and click on the shortcut you like for example the 'Windows' button + D, also known as 'Super + D'&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xtgPP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xtgPP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Try it: click you shortcut. You should see the desktop&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;That is it. You are done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: this answer is basically the same as &lt;a href=&quot;https://elementaryos.stackexchange.com/users/12813/alexandre-cavalcante&quot;&gt;Alex&lt;/a&gt;'s &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9206/how-to-add-show-desktop-icon-in-elementary-os/15618#15618&quot;&gt;here&lt;/a&gt;, I just added more detailed steps (and tried to +1 his, but not enough reputation :)&lt;/p&gt;&#xA;" OwnerUserId="14637" LastActivityDate="2018-05-25T23:37:58.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15620" PostTypeId="1" AcceptedAnswerId="15663" CreationDate="2018-05-26T00:19:52.517" Score="0" ViewCount="1506" Body="&lt;p&gt;I'm trying to edit some files with scratch, but it says &quot;you cannot save changes on file&quot; &quot;do you want to save changes to this file in a different location. &lt;/p&gt;&#xA;" OwnerUserId="14771" LastActivityDate="2020-01-12T08:13:51.727" Title="how do I unlock a file to make changes" Tags="|system|files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15622" PostTypeId="1" CreationDate="2018-05-26T05:28:25.270" Score="0" ViewCount="1115" Body="&lt;p&gt;I followed the steps shown below, but Signal is not showing in my applications folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps to install on Linux&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open your terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Confirm you have APT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the following three lines into your terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;wget --quiet --output-document - &lt;a href=&quot;https://updates.signal.org/desktop/apt/keys.asc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://updates.signal.org/desktop/apt/keys.asc&lt;/a&gt; | sudo apt-key add -&lt;/p&gt;&#xA;&#xA;&lt;p&gt;echo &quot;deb [arch=amd64] &lt;a href=&quot;https://updates.signal.org/desktop/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://updates.signal.org/desktop/apt&lt;/a&gt; xenial main&quot; | sudo tee -a /etc/apt/sources.list.d/signal-xenial.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install apt-transport-https &amp;amp;&amp;amp; sudo apt update &amp;amp;&amp;amp; sudo apt install signal-desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The instructions came from here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.signal.org/hc/en-us/articles/214507138-How-do-I-install-Signal-Desktop-&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.signal.org/hc/en-us/articles/214507138-How-do-I-install-Signal-Desktop-&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14771" LastActivityDate="2018-05-26T10:57:19.620" Title="How do I install Signal Desktop" Tags="|software-installation|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15623" PostTypeId="2" ParentId="15620" CreationDate="2018-05-26T06:11:55.657" Score="0" Body="&lt;p&gt;just give file premission to 777 vai teminal i think your problem will be solve(chmod 777 filename)&lt;/p&gt;&#xA;" OwnerUserId="14775" LastActivityDate="2018-05-26T06:11:55.657" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15624" PostTypeId="1" CreationDate="2018-05-26T07:51:27.610" Score="1" ViewCount="2832" Body="&lt;p&gt;The download link on the Firefox Developer Edition page just downloads a .tar.bz2 file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have tried the following methods:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Umake&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-desktop/ubuntu-make&#xA;sudo apt-get update&#xA;sudo apt-get install ubuntu-make&#xA;umake web firefox-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This gave me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR: Download page changed its syntax or is not parsable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;APT&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install firefox-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command ran but i could not find any instance of firefox developer edition in application launcher search. I ended up using &lt;code&gt;sudo apt remove&lt;/code&gt; later. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;PPA&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon running &lt;code&gt;sudo add-apt-repository ppa:ubuntu-mozilla-daily/firefox-aurora&lt;/code&gt;, I got the error: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo: add-apt-repository: command not found&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to install it manually from the .tar.bz2 file, but it was confusing as there are no elementary-specific instructions on the web.&lt;/p&gt;&#xA;" OwnerUserId="14776" LastActivityDate="2019-08-20T21:01:35.177" Title="How do I install Firefox Developer Edition on ElementaryOS?" Tags="|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15625" PostTypeId="2" ParentId="4446" CreationDate="2018-05-26T10:14:41.243" Score="0" Body="&lt;p&gt;The likely culprit is Dropbox as others have mentioned, since Dropbox does not recognize elementary OS's Desktop interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This solution will not require a reinstall of Dropbox. I would however recommend running &lt;code&gt;dropbox stop&lt;/code&gt; from the terminal. Once you have completed the below steps, you can restart the service by running &lt;code&gt;dropbox start&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The easiest and most straight forward solution is to add the following lines to &lt;code&gt;/usr/bin/dropbox&lt;/code&gt;, just after &lt;code&gt;import os&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;os.environ['XDG_CURRENT_DESKTOP']=&quot;Unity&quot;&#xA;os.environ['QT_STYLE_OVERRIDE']=&quot;''&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VsOyR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VsOyR.png&quot; alt=&quot;/usr/bin/dropbox Example&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14764" LastEditorUserId="14764" LastEditDate="2018-05-26T10:29:35.360" LastActivityDate="2018-05-26T10:29:35.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15626" PostTypeId="2" ParentId="15622" CreationDate="2018-05-26T10:57:19.620" Score="1" Body="&lt;p&gt;I can't say for certain why your particular steps are failing to add the Signal app to the menu, but I can say that the following steps are what I use, and Signal is absolutely in my menu with elementary 0.4.1 Loki.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -s https://updates.signal.org/desktop/apt/keys.asc | sudo apt-key add -&#xA;echo &quot;deb [arch=amd64] https://updates.signal.org/desktop/apt xenial main&quot; | sudo tee -a /etc/apt/sources.list.d/signal-xenial.list&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt install -y signal-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can see the instructions in the &quot;Signal for Debian based Linux&quot; section on the bottom right of the Signal download page at: &lt;a href=&quot;https://signal.org/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://signal.org/download/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14778" LastActivityDate="2018-05-26T10:57:19.620" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15628" PostTypeId="2" ParentId="15624" CreationDate="2018-05-26T14:52:35.287" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:ubuntu-mozilla-daily/firefox-aurora&#xA;sudo apt update&#xA;sudo apt install firefox-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will get you the Aurora builds, not stable. It looks like that's what you were wanting to do?&lt;/p&gt;&#xA;" OwnerUserId="3916" LastActivityDate="2018-05-26T14:52:35.287" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15629" PostTypeId="1" CreationDate="2018-05-26T15:39:17.300" Score="0" ViewCount="152" Body="&lt;p&gt;Let me explain.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With Ubuntu when I extracted a game in the download folder I go to the game file and click on the launcher that launches on the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt; &lt;a href=&quot;https://i.stack.imgur.com/OJCTB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OJCTB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With Elementary os it's impossible we have to launch it through the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What tool does Elementary lack for being able to do like Ubuntu. After all his base is Ubuntu 16.04.&lt;/p&gt;&#xA;" OwnerUserId="14783" LastActivityDate="2024-03-26T05:02:00.210" Title="Run a launcher on the desktop" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15631" PostTypeId="1" CreationDate="2018-05-26T16:42:11.413" Score="0" ViewCount="152" Body="&lt;p&gt;I have a fresh install of elementary os and I cannot connect to wifi. Only way to access internet is through LAN. I found similar problems on this forum but none of them could fix my problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;some of the commands outputs are as below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -r&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;4.13.0-32-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;ifconfig&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;enp2s0    Link encap:Ethernet  HWaddr 48:ba:4e:af:44:2d&lt;br&gt;&#xA;          inet addr:192.168.1.7  Bcast:192.168.1.255  Mask:255.255.255.0&#xA;          inet6 addr: fe80::8955:f56a:c8a0:993/64 Scope:Link&#xA;          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1&#xA;          RX packets:3925 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:3570 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:3336376 (3.3 MB)  TX bytes:627742 (627.7 KB)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lo        Link encap:Local Loopback&lt;br&gt;&#xA;          inet addr:127.0.0.1  Mask:255.0.0.0&#xA;          inet6 addr: ::1/128 Scope:Host&#xA;          UP LOOPBACK RUNNING  MTU:65536  Metric:1&#xA;          RX packets:1038 errors:0 dropped:0 overruns:0 frame:0&#xA;          TX packets:1038 errors:0 dropped:0 overruns:0 carrier:0&#xA;          collisions:0 txqueuelen:1000 &#xA;          RX bytes:114664 (114.6 KB)  TX bytes:114664 (114.6 KB)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lspci&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ouput&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576&#xA;00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577&#xA;00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 98e4 (rev da)&#xA;00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 15b3&#xA;00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b&#xA;00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c&#xA;00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c&#xA;00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Device 157c&#xA;00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157b&#xA;00:08.0 Encryption controller: Advanced Micro Devices, Inc. [AMD] Device 1578&#xA;00:09.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 157d&#xA;00:09.2 Audio device: Advanced Micro Devices, Inc. [AMD] Device 157a&#xA;00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 20)&#xA;00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 4b)&#xA;00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 49)&#xA;00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 4b)&#xA;00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)&#xA;00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b0&#xA;00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b1&#xA;00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b2&#xA;00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b3&#xA;00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b4&#xA;00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 15b5&#xA;01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330] (rev ff)&#xA;02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)&#xA;03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d723&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;iwconfig&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;enp2s0    no wireless extensions.&#xA;lo        no wireless extensions.&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14784" LastActivityDate="2024-03-27T05:04:45.647" Title="Wifi interface not displaying" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15632" PostTypeId="2" ParentId="15609" CreationDate="2018-05-26T17:29:38.933" Score="0" Body="&lt;p&gt;This bug has been fixed in elementary Juno.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-05-26T17:29:38.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15633" PostTypeId="2" ParentId="14054" CreationDate="2018-05-26T20:07:03.400" Score="1" Body="&lt;p&gt;I've not Elmentary OS but I had the same problem &quot;alarms can be up to one month in the future&quot; on Ubuntu Gnome 18.04 with Nvidia driver 396 and to solve this I use this Tuto : &lt;a href=&quot;https://devtalk.nvidia.com/default/topic/969433&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://devtalk.nvidia.com/default/topic/969433&lt;/a&gt; it works out of the box, if you have Nvidia Driver loaded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Computer : Asus UX410UF i7-8550U - 16 Go RAM -  Nvidia GeForce MX130 &#xA;Ubuntu 18.04 - Gnome-shell 3.28.1&lt;/p&gt;&#xA;" OwnerUserId="14786" LastActivityDate="2018-05-26T20:07:03.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15634" PostTypeId="2" ParentId="12847" CreationDate="2018-05-26T23:20:09.023" Score="1" Body="&lt;p&gt;Try running this in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface icon-theme 'elementary'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You may potentially need to log out and log in again for the default icons to reset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, you could install the Papirus icons. They look great.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c &quot;echo 'deb http://ppa.launchpad.net/papirus/papirus/ubuntu xenial main' &amp;gt; /etc/apt/sources.list.d/papirus-ppa.list&quot;&#xA;sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E58A9D36647CAE7F&#xA;sudo apt update&#xA;sudo apt install -y papirus-icon-theme libreoffice-style-papirus&#xA;gsettings set org.gnome.desktop.interface icon-theme 'ePapirus'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14778" LastActivityDate="2018-05-26T23:20:09.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15635" PostTypeId="2" ParentId="15631" CreationDate="2018-05-26T23:28:47.223" Score="0" Body="&lt;p&gt;If you are using windows PC, you need to reset your wireless adopter, by going into control panel select network and wireless-properties and reset that will do the job&lt;/p&gt;&#xA;" OwnerUserId="14787" LastActivityDate="2018-05-26T23:28:47.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15637" PostTypeId="1" AcceptedAnswerId="15651" CreationDate="2018-05-27T05:37:49.410" Score="0" ViewCount="809" Body="&lt;p&gt;I reinstalled eOS three weeks ago, now using 0.4.1. My system setup and partitions are same as before.&lt;br&gt;&#xA;From last week my applications are taking long time to load. Copy/paste operation is very slow, not more than 10MB/s, previously it used to be like 70MB/s. My laptop is not very old, it just 3 years old with 4th generation i5 and NVIDIA 820M with latest driver installed.&lt;br&gt;&#xA;Currently system is booting with Linux kernel 4.13, I tried booting with v4.11 but there was no difference.&lt;br&gt;&#xA;Also I tried to decrease my boot time using e4rat; did it create this problem? I don't know.&lt;br&gt;&#xA;I don't know what cause this problem, so I am here to ask possible solutions to debug this problem. Please let me know if you think something is causing this issue. Thanks&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-12-04T21:31:25.700" Title="Applications are loading very slow, copy/paste operation not going beyond 10MB/s" Tags="|release-loki|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15638" PostTypeId="2" ParentId="12155" CreationDate="2018-05-27T13:21:44.237" Score="0" Body="&lt;p&gt;I'm on a Razer Blade Stealth from late 2016 with integrated Intel graphics. I'm having this problem on a fresh install (dual-boot with Windows) and no solution seems to be helping. I renamed that file which seems to fix the problem for everyone else, I restarted lightdm, I installed drivers and updates, and I reinstalled the operating system more times than I can count.&#xA;Is there anything else I can do to fix this? The default desktop background is a beautiful tree, but I'd love it if I could use eOS as an operating system instead of just a nice digital picture frame.&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="14788" LastActivityDate="2018-05-27T13:21:44.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15641" PostTypeId="1" CreationDate="2018-05-27T20:52:43.027" Score="1" ViewCount="588" Body="&lt;p&gt;I have a little problem with the music app. When I try to play a .FLAC file, the application starts and shows a message (Analyzing Changes). Many seconds after, the application closes automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have elementary 0.4 Freya with the last updates. Does anybody have any idea about this issue?&lt;/p&gt;&#xA;" OwnerUserId="14789" LastEditorUserId="84" LastEditDate="2018-05-28T23:06:44.677" LastActivityDate="2019-05-17T00:38:03.853" Title="Music app crash" Tags="|music|crash|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15644" PostTypeId="1" CreationDate="2018-05-28T20:53:24.147" Score="2" ViewCount="131" Body="&lt;p&gt;I'm having a couple of problems with a clean install of Loki on my late 2016 model Razer Blade Stealth with an Intel i7-7500U (Kaby Lake) CPU and integrated graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm able to boot to the login screen, but if I go to the command line (&lt;code&gt;CTRL&lt;/code&gt;+&lt;code&gt;ALT&lt;/code&gt;+&lt;code&gt;F1&lt;/code&gt;) the screen starts flickering. If I try to login, the screen fills with static and doesn't show the desktop, regardless of how long I wait.&#xA;If I boot into recovery mode, the flickering goes away and the static is reduced, but when I try to login, it shows the cursor and the desktop background and becomes unresponsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what I've tried thus far:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Clean installing the OS, God knows how many times&lt;/li&gt;&#xA;&lt;li&gt;The good ol' &lt;code&gt;sudo apt-get update&lt;/code&gt;, &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;, and &lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;, thinking it was a driver problem&lt;/li&gt;&#xA;&lt;li&gt;I tried installing &lt;code&gt;xserver-org-video-intel&lt;/code&gt; and its dependencies&lt;/li&gt;&#xA;&lt;li&gt;I renamed the file &lt;code&gt;/etc/xdg/autostart/at-spi-dbus-bus.desktop&lt;/code&gt; as described &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10120/14795&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;I added &lt;code&gt;nomodeset&lt;/code&gt; to the Grub configuration as described &lt;a href=&quot;https://askubuntu.com/a/38782&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;I &lt;code&gt;sudo apt-get install&lt;/code&gt;ed &lt;code&gt;intel-microcode&lt;/code&gt;, which turns out was already installed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If there's any way to get Elementary to work on this laptop, some instructions would be greatly appreciated. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="14795" LastEditorUserId="14788" LastEditDate="2018-05-30T07:04:02.653" LastActivityDate="2018-05-30T07:04:02.653" Title="Graphics and login problems on late 2016 Razer Blade Stealth" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15645" PostTypeId="1" CreationDate="2018-05-28T21:22:18.777" Score="3" ViewCount="1031" Body="&lt;p&gt;I'm new to Elementary OS. I was running Debian with Gnome2.&#xA;My laptop does not have LED indicators for caps lock or any lock for that matter. Is there an applet for Elementary OS to display this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Num Lock and Caps lock indicator in the Icon Bar?&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is not, Is there any way to make one?&lt;/p&gt;&#xA;" OwnerUserId="14797" LastEditorUserId="14797" LastEditDate="2018-05-30T00:05:29.940" LastActivityDate="2019-01-29T05:55:21.327" Title="How to Show Caps lock, Number Lock in right corner?" Tags="|wingpanel|settings|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15646" PostTypeId="2" ParentId="15637" CreationDate="2018-05-28T21:44:56.650" Score="0" Body="&lt;p&gt;There is a lot of things that can cause this problem. Could you give more details like when did this problem first occur? &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Did you install a new APP?&lt;/li&gt;&#xA;&lt;li&gt;Do you have a hard drive or Solid State Drive. If you have an SSD is trim turned on. &lt;/li&gt;&#xA;&lt;li&gt;Are you Maxed out on RAM? &quot;Can be used when transferring data depending on setup.&quot;&lt;/li&gt;&#xA;&lt;li&gt;Are you transferring Files to External storage or the Same Drive?&#xA;If external are you using USB 2.0 or 3.0.&lt;/li&gt;&#xA;&lt;li&gt;If you have a HDD is it making a slight noise. If so a head can be dragging on a platter and you drive is about to die.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Please give as much detail as you can. We can Figure this out together as a comunity. &#xA;It could be as simple as an update or as bad as getting a new hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(ADVICE AS A USER- BACK UP DATA NOW, JUST IN CASE ANYTHING HAPPENS)&lt;/p&gt;&#xA;" OwnerUserId="14797" LastEditorUserId="8" LastEditDate="2018-12-04T21:31:25.700" LastActivityDate="2018-12-04T21:31:25.700" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15649" PostTypeId="2" ParentId="15594" CreationDate="2018-05-29T11:11:36.470" Score="2" Body="&lt;p&gt;I found the solution. In order to boot correctly I had the edit boot parameters in rEFInd. At rEFInd main screen highlight elementary, press F2 and then F2 again. At the end of the line just add &quot;root=/dev/sdX&quot; (without parentheses) where X is your root partition. Now I would like to know why it worked without it in Ubuntu and mint.&lt;/p&gt;&#xA;" OwnerUserId="14742" LastActivityDate="2018-05-29T11:11:36.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15650" PostTypeId="2" ParentId="10967" CreationDate="2018-05-29T11:35:21.813" Score="-1" Body="&lt;p&gt;Have you tried to format your sdcard as fat 32?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkfs.vfat -I /dev/sd#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;# is your device name&lt;/p&gt;&#xA;" OwnerUserId="14802" LastEditorUserId="84" LastEditDate="2018-05-29T17:49:31.467" LastActivityDate="2018-05-29T17:49:31.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15651" PostTypeId="2" ParentId="15637" CreationDate="2018-05-29T12:24:32.100" Score="0" Body="&lt;p&gt;I found the bug myself. And the problem is very specific to my setup, the geek setup.&lt;br&gt;&#xA;I have two partitions, one for root (&lt;code&gt;/dev/sda1&lt;/code&gt;) and another for backup (&lt;code&gt;/dev/sda2&lt;/code&gt;). backup drive was mounted in &lt;code&gt;/media/backup&lt;/code&gt;.&lt;br&gt;&#xA;Root was formatted with &lt;code&gt;ext4&lt;/code&gt; and backup was formatted with &lt;code&gt;xfs&lt;/code&gt; file system.&lt;br&gt;&#xA;Now the tricky part, I mounted &lt;code&gt;/home/edward&lt;/code&gt; on &lt;code&gt;/media/backup/edward&lt;/code&gt;. The &lt;code&gt;fstab&lt;/code&gt; entry looked like: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/media/backup/edward  /home/edward  none  defaults,bind  0  0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This setup was causing the slow down after I logged in. But up until I see login screen my system was booting in 30 seconds which is normal for my hardware. This hinted me that there must be something wrong with my home folder.&lt;br&gt;&#xA;Then I logged in my guest account and saw that programs are loading just fine without much delay. Home account of guest user is made in &lt;code&gt;/tmp&lt;/code&gt; folder which is on same partition as of root &lt;code&gt;/&lt;/code&gt;. This is what hinted me that mounting a folder of &lt;code&gt;ext4&lt;/code&gt; partition in folder &lt;code&gt;xfs&lt;/code&gt; partition is causing the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How I solved the issue, for now, is by moving my home folder back to partition of root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Conclusion: mounting a folder of one type of file system (&lt;code&gt;ext4&lt;/code&gt;) in folder of another (&lt;code&gt;xfs&lt;/code&gt;) seems to be slowing down the system&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-05-29T12:24:32.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15652" PostTypeId="2" ParentId="15132" CreationDate="2018-05-30T01:10:35.443" Score="1" Body="&lt;p&gt;Allot of (new) low end laptops and tablets ship with a 64-bit CPU, but 32-bit UEFI firmware implementation. It should be fairly possible to use a 32-bit UEFI grub build to boot a 64-bit kernel and distribution on these systems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far this setup has (sadly) not been supported in elementary OS (yet), which leads to many live-USB ISO boot problems/issues/questions/reports like this...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are quite a few &quot;older&quot; 32-bit UEFI with 64-bit CPU systems out there to, so this should allow elementary OS to run on even more hardware. Some well known examples are: The Asus Transformer T100TA, HP Stream 7, Dell Venue 8 Pro 5830, the first Apple Intel Macs and many others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do know for sure that this solves the above problem, as when I try to boot from ANY live-USB, it ONLY works with Fedora 28 (64-bit) and the 64-bit Microsoft MSDN ISO's (they've added 32-bit UEFI support nicely).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now, it looks like I have to wait for proper 32-bit UEFI support/implementation in (I hope) Juno.&lt;/p&gt;&#xA;" OwnerUserId="14106" LastEditorUserId="14106" LastEditDate="2018-05-30T02:39:05.200" LastActivityDate="2018-05-30T02:39:05.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15653" PostTypeId="1" CreationDate="2018-05-30T08:55:59.247" Score="1" ViewCount="1489" Body="&lt;p&gt;I'm brand new to eOS, but I've used other linux distros before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Gdebi ok.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My problem is that Gdebi isn't working properly when I run it after clicking on a file in Files explorer and run 'Open With' an error box appears- &quot;unable to open files or uris with this app&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It installs everything ok if run from within Applications- it's UI finds, opens and installs without issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is the problem with the installation of Gdebi ( I've reinstalled several times), or with Files? I've tried different .deb files so an isolated corrupt .deb file is not the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help available.&lt;/p&gt;&#xA;" OwnerUserId="14750" LastActivityDate="2024-03-26T00:08:36.077" Title="Gdebi not installing .deb from within Files explorer" Tags="|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15654" PostTypeId="2" ParentId="15645" CreationDate="2018-05-30T17:15:47.507" Score="2" Body="&lt;p&gt;I solved my own issue. This should be standard with every Elementry OS installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Execute the following command in a terminal window. It installs the indicator for the caps lock and numeric lock keys.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install indicator-keylock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14797" LastEditorUserId="15074" LastEditDate="2018-07-13T05:50:37.517" LastActivityDate="2018-07-13T05:50:37.517" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15660" PostTypeId="1" CreationDate="2018-05-31T13:36:12.027" Score="0" ViewCount="4548" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TWlbD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TWlbD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error message contains:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Failed to fetch updates&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may have been caused by external, manually added software repositories or a corrupted sources file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;details:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu xenial Release' does not have a Release file.&#xA;&#xA;W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14769" LastEditorUserId="2629" LastEditDate="2018-07-12T12:57:37.733" LastActivityDate="2018-09-10T15:00:50.760" Title="Failed to fetch updates : How to fix corrupt source file" Tags="|release-loki|updates|settings|software-installation|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15661" PostTypeId="1" CreationDate="2018-05-31T16:43:12.777" Score="0" ViewCount="380" Body="&lt;p&gt;I keep getting this message everytime I install apps or after running sudo apt update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't seem to prevent me installing if I ignore. &#xA;Sudo apt-get autoremove doesn't fix this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="14750" LastActivityDate="2024-04-02T14:03:10.393" Title="Updating Repositories" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15662" PostTypeId="2" ParentId="15660" CreationDate="2018-05-31T20:39:58.377" Score="1" Body="&lt;p&gt;As yu can see in &lt;a href=&quot;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu/dists/&lt;/a&gt; xenial is not supported. You have trusty or utopic version only.&#xA;But you can use anther repository for Tweaks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="359" LastActivityDate="2018-05-31T20:39:58.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15663" PostTypeId="2" ParentId="15620" CreationDate="2018-05-31T20:55:25.013" Score="0" Body="&lt;p&gt;Maybe you have sticky bit on the folder?&#xA;To remove it try to run this on the folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod -t &amp;lt;folder_path&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="359" LastActivityDate="2018-05-31T20:55:25.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15664" PostTypeId="2" ParentId="11546" CreationDate="2018-06-01T00:39:06.350" Score="0" Body="&lt;p&gt;I have a process that achieves this result, but I don't use a custom ISO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I install elementary using the standard Loki (0.4.1) ISO, then I run a bash script that I have created after install. It does things like: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Update and upgrade&lt;/li&gt;&#xA;&lt;li&gt;Remove default applications I don't want/need&lt;/li&gt;&#xA;&lt;li&gt;Install all new applications&lt;/li&gt;&#xA;&lt;li&gt;Make changes to config files (things like fstab optimisations, Vim, TaskWarrior, Git, SSH, Gimp etc)&lt;/li&gt;&#xA;&lt;li&gt;Mask services that aren't needed&lt;/li&gt;&#xA;&lt;li&gt;Apply Papirus icons&lt;/li&gt;&#xA;&lt;li&gt;Probably more things that I can't remember.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This is a very quick process. You just install like you would normally, then run the bash script, and let it do its thing.&lt;/p&gt;&#xA;" OwnerUserId="14778" LastActivityDate="2018-06-01T00:39:06.350" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15665" PostTypeId="2" ParentId="15661" CreationDate="2018-06-01T00:42:03.037" Score="0" Body="&lt;p&gt;I don't have enough reputation to comment, so I apologise for putting this as an answer. I think you may have forgotten to post the error message you are getting?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would run &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade&lt;/code&gt; if there is an issue with updating repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, if you have had a previous apt install fail, you can resolve it with &lt;code&gt;sudo apt -f install&lt;/code&gt; which will often fix things.&lt;/p&gt;&#xA;" OwnerUserId="14778" LastActivityDate="2018-06-01T00:42:03.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15666" PostTypeId="2" ParentId="14894" CreationDate="2018-06-01T00:44:56.360" Score="1" Body="&lt;p&gt;If &lt;code&gt;alt + tab&lt;/code&gt; fails, try pressing &lt;code&gt;super + A&lt;/code&gt; or &lt;code&gt;super + W&lt;/code&gt; instead. They will bring up the multi tasking view.&lt;/p&gt;&#xA;" OwnerUserId="14778" LastActivityDate="2018-06-01T00:44:56.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15667" PostTypeId="2" ParentId="15597" CreationDate="2018-06-01T03:39:05.973" Score="1" Body="&lt;p&gt;My eOS desktop was ruined by installing a GNOME screensaver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re-installed eOS and problem solved.&lt;/p&gt;&#xA;" OwnerUserId="14746" LastActivityDate="2018-06-01T03:39:05.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15668" PostTypeId="2" ParentId="14918" CreationDate="2018-06-01T12:26:53.660" Score="1" Body="&lt;p&gt;After some extened research and trials I managed to find a almost perfect fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/X11/xorg.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Option      &quot;TearFree&quot; &quot;true&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will looks like something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;   Identifier  &quot;Intel Graphics&quot;&#xA;   Driver      &quot;intel&quot;&#xA;   Option      &quot;AccelMethod&quot; &quot;sna&quot;&#xA;   Option      &quot;TearFree&quot; &quot;true&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6954" LastActivityDate="2018-06-01T12:26:53.660" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15669" PostTypeId="2" ParentId="15197" CreationDate="2018-06-01T16:04:17.083" Score="0" Body="&lt;p&gt;After a little bit of experimentation I found that the issue is related to the VirtualBox guest packages. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To allow the GUI to boot as normal and get back to your OS, you need to remove them as outlined below. &lt;strong&gt;Note that doing so will result in some VirtualBox functions being lost - the most prominent being bidirectional copy and pasting, and mouse highlight functions.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot up machine in VirtualBox&lt;/li&gt;&#xA;&lt;li&gt;Wait for cursor blinking issue, then access &lt;code&gt;tty1&lt;/code&gt; using &lt;code&gt;Ctrl + Alt + F1&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Log in as normal user&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run the following three commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove --auto-remove virtualbox-guest-dkms&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove --auto-remove virtualbox-guest-dkms-hwe&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove --auto-remove virtualbox-guest-x11&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot using &lt;code&gt;sudo reboot now&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You should then see the GUI start and present you with your normal login screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's worth noting that even after installing the latest version of VirtualBox in Windows, installing the latest guest utils and VirtualBox additions on Elementary, and ensuring everything else is up-to-date &lt;strong&gt;still&lt;/strong&gt; causes the same problem, even on fresh install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unsure of exact cause of conflict when these are installed.&lt;/p&gt;&#xA;" OwnerUserId="7958" LastActivityDate="2018-06-01T16:04:17.083" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15672" PostTypeId="1" CreationDate="2018-06-02T02:03:27.683" Score="0" ViewCount="122" Body="&lt;p&gt;I recently installed elementary OS on my Desktop computer, and after customizing a little bit with dconf settings my wingpanel (topbar) dissapeared. Maximizing an application doesn't cover the space where it's supposed to be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;killall wingpanel&lt;/code&gt; doesn't do anything, maximizing windows act as if it's gone and recover the original size as if it's back, but no top bar appears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to purge the package &lt;code&gt;wingpanel&lt;/code&gt; and reinstalling it again but it had no effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the cause of this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated and it would save me from reinstalling the whole system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="14826" LastEditorUserId="14826" LastEditDate="2018-06-02T02:09:01.253" LastActivityDate="2019-05-03T15:03:35.760" Title="loki - missing wingpanel after messing with dconf" Tags="|release-loki|wingpanel|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15673" PostTypeId="2" ParentId="636" CreationDate="2018-06-03T04:27:18.427" Score="1" Body="&lt;p&gt;Install &lt;a href=&quot;https://github.com/lordamit/Brightness&quot; rel=&quot;nofollow noreferrer&quot;&gt;Brightness Controller&lt;/a&gt; with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:apandada1/brightness-controller&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Version 1 with up to 4 Monitor Support:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install brightness-controller-simple&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Epewd.png&quot; alt=&quot;]([![Brightness Controller Version 1&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Version 2 with Multi Monitor Support and other features:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install brightness-controller&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://raw.githubusercontent.com/LordAmit/Brightness/master/img/BrightnessController.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://raw.githubusercontent.com/LordAmit/Brightness/master/img/BrightnessController.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;strong&gt;Note:&lt;/strong&gt; This does not decrease the intensity of backlight, so won't save your batteries. But you can use this as a last resort to save your eyes.&lt;/p&gt;&#xA;" OwnerUserId="14086" LastActivityDate="2018-06-03T04:27:18.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15674" PostTypeId="1" CreationDate="2018-06-03T06:08:16.957" Score="5" ViewCount="3446" Body="&lt;p&gt;I know if elementary Juno still development, but for waiting new version i want to ask ease way to upgrade without clean install?&lt;/p&gt;&#xA;" OwnerUserId="14595" LastActivityDate="2018-11-22T21:02:19.427" Title="Upgrade from Loki to Juno" Tags="|release-loki|release-juno|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15675" PostTypeId="1" CreationDate="2018-06-03T07:11:12.773" Score="1" ViewCount="371" Body="&lt;p&gt;Recently had some issues adding profiles in in the color settings, so I uninstalled then reinstalled it via the app center. Unfortunately, after reinstalling it the color setting, the color icon is no longer displayed under the settings panel. I've tried reinstalling gnome control center and elementary-desktop, but with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated!&lt;/p&gt;&#xA;" OwnerUserId="6799" LastActivityDate="2019-03-17T18:04:54.870" Title="Color Missing Under Settings" Tags="|settings|color|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15677" PostTypeId="2" ParentId="11419" CreationDate="2018-06-03T08:57:40.220" Score="-1" Body="&lt;p&gt;If that doesn't work, this commands gets it in the wing-panel as well as the switchboard&#xA;sudo apt-get install indicator-bluetooth&lt;/p&gt;&#xA;" OwnerUserId="14837" LastActivityDate="2018-06-03T08:57:40.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15679" PostTypeId="2" ParentId="15675" CreationDate="2018-06-03T18:30:03.157" Score="2" Body="&lt;p&gt;Update:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ended up fixing the issue. Apparently the switchboard color plugin had been removed. Once I reinstalled that, the color setting appears under the settings window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can reinstall the switchboard color plugin by running the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install switchboard-plug-gcc-color&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install switchboard-plug-gcc-color-dbg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hopefully this will help anyone else out if they have this issue!&lt;/p&gt;&#xA;" OwnerUserId="6799" LastActivityDate="2018-06-03T18:30:03.157" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15681" PostTypeId="2" ParentId="13598" CreationDate="2018-06-03T21:16:52.530" Score="0" Body="&lt;p&gt;Just check that your Discover Devices window is expanded. By default its minimal, and can hide discovered devices within. This should really be reported as a bug I guess.&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2018-06-03T21:16:52.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15685" PostTypeId="1" CreationDate="2018-06-04T07:58:55.157" Score="1" ViewCount="1152" Body="&lt;p&gt;How can I open &lt;code&gt;pantheon-terminal&lt;/code&gt; with starting command to be executed? For example something like &lt;code&gt;pantheon-terminal --start-with echo &quot;Hello World!&quot;&lt;/code&gt; should open new terminal window and execute the &lt;code&gt;echo &quot;Hello World!&quot;&lt;/code&gt; command in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to make something like that?&lt;/p&gt;&#xA;" OwnerUserId="14846" LastEditorUserId="16827" LastEditDate="2019-01-07T12:18:39.227" LastActivityDate="2023-05-05T21:58:03.693" Title="Open pantheon terminal with starting command" Tags="|pantheon-terminal|command-line|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15686" PostTypeId="2" ParentId="15674" CreationDate="2018-06-04T09:22:09.720" Score="1" Body="&lt;p&gt;There is no upgrade path from Loki to Juno (at least for now). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As Juno is not yet released you also can´t really install it now. You could install Ubuntu 18.04 and use the unstable PPA to setup an environment very similar to Juno, but that is not recommended unless you are an developer.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2018-06-04T09:22:09.720" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15687" PostTypeId="2" ParentId="15672" CreationDate="2018-06-04T09:29:23.987" Score="1" Body="&lt;p&gt;You could download dconf tools (&lt;code&gt;sudo apt install dconf-tools&lt;/code&gt;), search for the values you remember changing and pressing the restore to default button. This will change the values back to their default values, hopefully fixing your issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The value you've changed is probably located somewhere in the &lt;code&gt;Pantheon&lt;/code&gt; namespace.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2018-06-04T09:29:23.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15688" PostTypeId="1" CreationDate="2018-06-04T11:02:51.300" Score="1" ViewCount="142" Body="&lt;p&gt;Installed Elementary OS at home using Wifi, all is working fine.&#xA;But when connecting to Ethernet cable at work, there is no netwerk connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The network card is detected, but there is no IP address.&#xA;Network-manager is running, dhclient gives error:&#xA;Operation not possible due to RF-Kill.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;rfkill list all, gives:&#xA;3: phy0: Wireless LAN. Both soft/hard-blocked: Yes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;rfkill unblock all, doesn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I am not connected I need to use another computer to create this post.&lt;/p&gt;&#xA;" OwnerUserId="14847" LastActivityDate="2018-11-08T16:02:16.050" Title="Ethernet not working on Loki, no IP address" Tags="|release-loki|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15691" PostTypeId="1" CreationDate="2018-06-04T19:11:18.643" Score="0" ViewCount="199" Body="&lt;p&gt;I'm on elementary 0.4.1 Loki and I run Telegram Desktop. The only way I can get the special characters such as &lt;code&gt;é&lt;/code&gt; or &lt;code&gt;ã&lt;/code&gt; on Telegram Desktop is to run with this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;QT_IM_MODULE=xim Downloads/Telegram/Telegram&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I made a shortcut for starting telegram with special characters, but it just doesn't work. Other shortcuts work fine but this one wont start. What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="14849" LastEditorUserId="14940" LastEditDate="2019-01-02T14:09:49.743" LastActivityDate="2019-06-01T17:03:10.397" Title="Shortcut not working" Tags="|release-loki|slingshot|app-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15693" PostTypeId="2" ParentId="15691" CreationDate="2018-06-04T21:14:01.263" Score="1" Body="&lt;p&gt;Do you need to put the whole code here.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=Telegram Desktop&#xA;Comment=Official desktop version of Telegram messaging app&#xA;Exec=env QT_IM_MODULE=xim /opt/Telegram/Telegram -- %u&#xA;Icon=telegram&#xA;Terminal=false&#xA;StartupWMClass=TelegramDesktop&#xA;Type=Application&#xA;Categories=Network;InstantMessaging;Qt;&#xA;MimeType=x-scheme-handler/tg;&#xA;X-Desktop-File-Install-Version=0.22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But you need to delete the &lt;code&gt;TryExec&lt;/code&gt; line, otherwise it will not open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this is a palliative. Other applications running on QT will need extra settings. Try to do the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -model abnt2 -layout br -variant abnt2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo printf 'XKBMODEL=&quot;pc105&quot;\nXKBLAYOUT=&quot;br&quot;\nXKBVARIANT=&quot;abnt2&quot;\nXKBOPTIONS=&quot;&quot;' &amp;gt; /etc/default/keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And reboot. This should resolve permanently. Then tell me if that solved it.&lt;/p&gt;&#xA;" OwnerUserId="14851" LastEditorUserId="14940" LastEditDate="2019-01-02T14:11:42.623" LastActivityDate="2019-01-02T14:11:42.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15694" PostTypeId="2" ParentId="7550" CreationDate="2018-06-04T23:04:55.287" Score="0" Body="&lt;p&gt;env XDG_CURRENT_DESKTOP=Unity QT_STYLE_OVERRIDE='' dropbox start&#xA;Is the only one that worked but has odd behaviour in Start Applications.&#xA;As you can see the env line is shown, then once it successfully runs with correct icon it instantiates a new startup item which even though is disabled for some reason or other wants to run resulting in errant red icon in tray.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Sf9G0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sf9G0.png&quot; alt=&quot;Env command before run&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rP1Tq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rP1Tq.png&quot; alt=&quot;After run Env command&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/p3n3K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/p3n3K.png&quot; alt=&quot;Next run Env command with errant tray icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2018-06-04T23:04:55.287" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15698" PostTypeId="1" AcceptedAnswerId="15702" CreationDate="2018-06-05T13:39:10.387" Score="0" ViewCount="809" Body="&lt;p&gt;All my icons are nice-looking, thanks to the elementary os theme. however, firefox icon is the default icon and not changed.&lt;br&gt;&#xA; I have installed ElementaryPlus theme to add additional icons but firefox was not included.&lt;br&gt;&#xA;Anyone have tried changing firefox icon? is there a way to change it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS: Elementery OS Loki 0.4.1&lt;/p&gt;&#xA;" OwnerUserId="14854" LastActivityDate="2018-06-06T18:16:33.040" Title="Elementary Os: Change firefox default icon" Tags="|release-loki|elementary-website|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15700" PostTypeId="1" CreationDate="2018-06-05T15:03:23.920" Score="0" ViewCount="243" Body="&lt;p&gt;I've searched before posting this. The &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/742/cant-mount-windows-partition-r-w-anymore&quot;&gt;top answer&lt;/a&gt; was kind of my problem. I formatted and fresh installed Windows 10 (1803 version) then made a partition and installed Elementary OS. Everything works fine. I can boot, EOS menu appears, I can select and get into either OS without issues. However, I can't seem to access the Win partition from Elementary's file manager. It says Windows is hibernating or didn't shut down completely. This is not true since I A) first thing I did was turning off fast startup (also turned off fast boot from bios just in case) and B) shut down and turned off PSU / restarted Windows (supposedly Windows restart doesn't get affected by fast startup). Still no dice.&lt;br /&gt;&#xA;Then, from that top answer I tried to run the Linux command similar to chkdsk and it pulls up the same error, see down below (don't know how to make text box for the code, sorry):&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Mounting volume... Windows is hibernated, refused to mount. FAILED&lt;/p&gt;&#xA;&lt;p&gt;Attempting to correct errors...  Processing $MFT and $MFTMirr...&lt;/p&gt;&#xA;&lt;p&gt;Reading $MFT... OK Reading $MFTMirr... OK Comparing $MFTMirr to&lt;/p&gt;&#xA;&lt;p&gt;$MFT... OK Processing of $MFT and $MFTMirr completed successfully.&lt;/p&gt;&#xA;&lt;p&gt;Setting required flags on partition... OK Going to empty the journal&lt;/p&gt;&#xA;&lt;p&gt;($LogFile)... OK Windows is hibernated, refused to mount. Remount failed: Operation not permitted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Now the option with -d also gives that error. So basically the problem is I can't &amp;quot;stop&amp;quot; Windows from hibernating although every option for that is turned off and I did fully shut down the OS. Also ran chkdsk and found no errors, however didn't solve my issue like it did with the person.&#xA;Help? I need it to be W/R accessible since I use it to copy files and such back and forth. Having to restart, copy into USB and all is really slow for me. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="9541" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-12-04T00:01:10.180" Title="Can't mount Windows 10 Partition on Loki" Tags="|mount|microsoft-windows|ntfs|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15701" PostTypeId="2" ParentId="15700" CreationDate="2018-06-05T18:00:45.180" Score="1" Body="&lt;p&gt;I believe that this is caused by Fast Startup feature on Windows 8 and 10. The good news is that it can be disabled, try to Google it.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-06-05T18:00:45.180" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15702" PostTypeId="2" ParentId="15698" CreationDate="2018-06-05T20:19:15.533" Score="1" Body="&lt;p&gt;You can edit the default &lt;code&gt;firefox.desktop&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First open terminal and copy the original one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /usr/share/applications/firefox.desktop ~/.local/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now edit the copy &lt;code&gt;~/.local/share/applications/firefox.desktop&lt;/code&gt; with your favorite editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to adjust the line containing &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Icon=/PATH/TO/YOUR/ICON&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Mostly icons are stored under &lt;code&gt;/usr/share/icons/...&lt;/code&gt; Probably you will find your desired icon there.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2018-06-05T20:19:15.533" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15703" PostTypeId="1" CreationDate="2018-06-05T21:59:13.600" Score="0" ViewCount="560" Body="&lt;p&gt;For 7 months I have been using Elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been trying to take system updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I have been having the following error no matter what I have done to get rid of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: The repository '&lt;a href=&quot;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu&lt;/a&gt; xenial Release' does not have a Release file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch &lt;a href=&quot;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu/dists/xenial/main/binary-amd64/Packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu/dists/xenial/main/binary-amd64/Packages&lt;/a&gt;  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have seen that there are other people as well who are having the same problem. But since I am new in Linux a through help will be welcomed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="13900" LastActivityDate="2024-03-30T12:06:20.780" Title="Software-update Problem in Elementary OS 0.4.1 Loki" Tags="|release-loki|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15704" PostTypeId="1" AcceptedAnswerId="15705" CreationDate="2018-06-06T11:09:02.083" Score="0" ViewCount="4406" Body="&lt;p&gt;anyone found a way to keep nVidia's Powermizer settings to stick to &lt;strong&gt;Performance Mode&lt;/strong&gt; between computer restarts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I select it from nVidia Settings GUI it always reverts to &lt;strong&gt;Auto Mode&lt;/strong&gt; between computer restarts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want it to stay in &lt;strong&gt;Performance Mode&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Already tried adding options to device section of the xorg.conf:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier &quot;nvidia&quot;&#xA;    Driver &quot;nvidia&quot;&#xA;    BusID &quot;PCI:1@0:0:0&quot;&#xA;    Option &quot;ConstrainCursor&quot; &quot;off&quot;&#xA;    Option  &quot;Coolbits&quot; &quot;13&quot;&#xA;    Option  &quot;RegistryDwords&quot; &quot;PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerDefaultAC=0x1&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-10-02T09:40:27.857" LastActivityDate="2018-10-02T09:40:27.857" Title="(SOLVED) Permanent nVidia Powermizer Performance Mode" Tags="|release-loki|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15705" PostTypeId="2" ParentId="15704" CreationDate="2018-06-06T14:53:41.353" Score="0" Body="&lt;p&gt;Managed to find a &lt;strong&gt;workaround&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changing performance modes is possible through terminal with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-settings -a [gpu:0]/GpuPowerMizerMode=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;where:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;0 - adaptive mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - max performance mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - auto mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can just create a small startup script (like for many workarounds in Linux). Just create a &lt;em&gt;yourscriptname&lt;/em&gt;.desktop file under ~/.config/autostart and fill it with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Exec=nvidia-settings -a [gpu:0]/GpuPowerMizerMode=1&#xA;Hidden=false&#xA;NoDisplay=false&#xA;X-GNOME-Autostart-enabled=true&#xA;Name=powermizer-maxperformance-autostart&#xA;Comment=Ustawiamy GPU na poziomie najwyższej wydajności&#xA;X-GNOME-Autostart-Delay=5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To test if it is actually working open nVidia Settings GUI and check Powermizer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively issue a command in the terminal and check the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-smi --query-gpu=pstate --format=csv&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;P0 - max performance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P12 - min performance &lt;/p&gt;&#xA;" OwnerUserId="9974" LastEditorUserId="9974" LastEditDate="2018-06-06T15:00:20.520" LastActivityDate="2018-06-06T15:00:20.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15706" PostTypeId="2" ParentId="15138" CreationDate="2018-06-06T16:21:42.083" Score="0" Body="&lt;p&gt;I solved it by&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get clean&lt;br&gt;&#xA;  sudo apt-get update  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;the &quot;clean&quot; argument deletes the local repo files.&lt;/p&gt;&#xA;" OwnerUserId="14859" LastActivityDate="2018-06-06T16:21:42.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15707" PostTypeId="1" CreationDate="2018-06-06T18:06:38.370" Score="2" ViewCount="1612" Body="&lt;p&gt;I'm currently running elementary OS Loki and I have my monitor connected via Displayport 1.4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On other Linux distributions (Solus) I am able to play sound on my monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On elementary OS, there is nothing to click in the Output section of the Sound setting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I type &lt;code&gt;aplay -l&lt;/code&gt; this is what I see&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;aplay -l&#xA;**** List of PLAYBACK Hardware Devices ****&#xA;card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: HDMI [HDA ATI HDMI], device 11: HDMI 5 [HDMI 5]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 1: Generic [HD-Audio Generic], device 0: ALC892 Analog [ALC892 Analog]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="14857" LastEditorUserId="19360" LastEditDate="2019-12-16T03:35:18.410" LastActivityDate="2023-12-25T17:05:55.687" Title="How can I get audio over Displayport?" Tags="|release-loki|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15708" PostTypeId="2" ParentId="15698" CreationDate="2018-06-06T18:16:33.040" Score="0" Body="&lt;p&gt;I found a theme called &lt;strong&gt;Elementary-Add&lt;/strong&gt; theme which has a lot of Elementary-Styled icons including firefox.&lt;br&gt;&#xA;I copied &lt;strong&gt;firefox 48px icon&lt;/strong&gt;  from that theme and added it to Elementary Plus theme folder which I've already installed.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;ElemetaryPlus folder:&lt;/em&gt;   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/icons/elementaryPlus/Apps/48&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then turned &lt;i&gt;Elementary+ Configurator&lt;/i&gt; on and off. Icon changed!&lt;/p&gt;&#xA;" OwnerUserId="14854" LastActivityDate="2018-06-06T18:16:33.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15710" PostTypeId="2" ParentId="15179" CreationDate="2018-06-06T23:48:16.503" Score="2" Body="&lt;p&gt;&lt;strong&gt;Snaps&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Snaps are not supported in the AppCenter but you can install Snaptastic. Snaptastic will manage Snaps, including updates, installation and removal. &#xA;Snaptastic is found in the AppCenter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Sources&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Software sources are not by default managed by AppCenter but you can install &lt;em&gt;Software and Sources&lt;/em&gt; in the AppCenter. This is the other half of ubuntu software center that allows you to manage sources, change update frequency, additional drivers and more. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Software and Sources&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Snaptastic&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="14797" LastActivityDate="2018-06-06T23:48:16.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15712" PostTypeId="2" ParentId="3142" CreationDate="2018-06-07T07:04:26.743" Score="0" Body="&lt;p&gt;Alt+Tab should do it, it open all open windows and you can choose one.&lt;/p&gt;&#xA;" OwnerUserId="14866" LastActivityDate="2018-06-07T07:04:26.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15713" PostTypeId="1" CreationDate="2018-06-07T07:56:33.107" Score="1" ViewCount="249" Body="&lt;p&gt;I am using Elementary OS version 0.4.1.&lt;br&gt;&#xA;I need to give pantheon terminal a fixed window name. Currently it is set to &lt;em&gt;mix&lt;/em&gt; of command it is executing and the &lt;code&gt;pwd&lt;/code&gt;, which is not what I want.&lt;br&gt;&#xA;Is there a way to this? Note: I am using &lt;code&gt;zsh&lt;/code&gt; shell&lt;br&gt;&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="9031" LastEditorUserId="9031" LastEditDate="2018-06-13T04:18:23.347" LastActivityDate="2018-06-13T04:18:23.347" Title="Give pantheon terminal a fixed window name" Tags="|release-loki|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15716" PostTypeId="1" CreationDate="2018-06-08T21:03:30.710" Score="1" ViewCount="36" Body="&lt;p&gt;I've recently installed Skype to my computer, which runs Elementary OS 0.4.1 Loki. Even though it was installed smoothly, when I try to click on call icon, it does nothing. So now I'm unable to make any kind of calls, voice or video, through it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also in the voice and camera settings section, even though Skype says it detected HD WebCam, the test screen is black and my webcam doesn't turn on. Any ideas what is causing this, or how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="10357" LastActivityDate="2018-06-08T21:03:30.710" Title="Cannot make calls through Skype" Tags="|release-loki|skype|webcam|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15717" PostTypeId="1" CreationDate="2018-06-08T23:14:28.320" Score="0" ViewCount="148" Body="&lt;p&gt;My wi-fi completely disables not allowing me to enable it again (see photo) &lt;a href=&quot;https://i.stack.imgur.com/NcHDl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NcHDl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when I close the lid of my laptop. I found a post regarding the same issue but the solution posted there did not work for me. The solution was to run 'sudo service network-manager restart' but it did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated!&lt;/p&gt;&#xA;" OwnerUserId="13072" LastEditorUserId="13072" LastEditDate="2018-06-10T03:42:57.747" LastActivityDate="2023-12-12T01:04:30.500" Title="Wi-fi network completely disables when I close lid (suspend)" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15718" PostTypeId="1" AcceptedAnswerId="17375" CreationDate="2018-06-09T00:18:48.357" Score="0" ViewCount="500" Body="&lt;p&gt;When trying to update from the AppCenter I get this error, with the text &quot;This may have been caused by external, manually added software repositories or a corrupted sources file.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These are the details:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target Translations (main/i18n/Translation-pt) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:56 and /etc/apt/sources.list.d/appcenter.list:1&#xA;E: http://pt.archive.ubuntu.com/ubuntu xenial-updates/restricted amd64 DEP-11 Metadata is not (yet) available (Could not open file /var/lib/apt/lists/partial/pt.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz - open (13: Permission denied))&#xA;E: http://pt.archive.ubuntu.com/ubuntu xenial-backports/main DEP-11 64x64 Icons is not (yet) available (Could not open file /var/lib/apt/lists/partial/pt.archive.ubuntu.com_ubuntu_dists_xenial-backports_main_dep11_icons-64x64.tar.gz - open (13: Permission denied))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before I have had problems trying to update both from the AppStore and terminal, but it was, according to the help I got, with the kxstudio-debian and nathandyer/vocal-daily. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you please help me solve this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="9699" LastEditDate="2018-12-05T23:47:07.690" LastActivityDate="2018-12-05T23:47:07.690" Title="Failed to fetch updates error: &quot;configured multiple times&quot;?" Tags="|updates|appcenter|repositories|sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15723" PostTypeId="2" ParentId="15717" CreationDate="2018-06-10T03:50:47.567" Score="0" Body="&lt;p&gt;What finally worked for me was using the function network button (on/off) and the funny thing is that it does not disable the network anymore when I suspend the laptop when closing the lid! computers work in mysterious ways... (sometimes)&lt;/p&gt;&#xA;" OwnerUserId="13072" LastActivityDate="2018-06-10T03:50:47.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15724" PostTypeId="2" ParentId="15713" CreationDate="2018-06-10T07:45:12.573" Score="1" Body="&lt;p&gt;Yes, just edit your bash.rc. This line&#xA;&lt;a href=&quot;https://gist.github.com/kossoy/f87acbdc5b14e06bb20a2da645666637#file-bashrc-sh-L119&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/kossoy/f87acbdc5b14e06bb20a2da645666637#file-bashrc-sh-L119&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2018-06-10T07:45:12.573" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15726" PostTypeId="1" AcceptedAnswerId="15736" CreationDate="2018-06-10T19:56:21.997" Score="0" ViewCount="175" Body="&lt;p&gt;I have installed Elementary OS on my LVM partition alongside Fedora. Since I already have a boot partition with grub installed I skipped the boot-loader installation by running the ubiquity installer with &lt;code&gt;-b&lt;/code&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After successful installation, I booted my Fedora and ran &lt;code&gt;grub2-mkconfig &amp;gt; /boot/grub2/grub.cfg&lt;/code&gt;. It generated the following grub menu entry (relevant lines only)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;menuentry 'elementary OS 0.4.1 Loki (0.4.1) (on /dev/mapper/fedora-elementary)' --class elementary --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-9e66ef60-8278-4968-8cd8-71dfb9f6b927' {&#xA;    insmod part_msdos&#xA;    insmod lvm&#xA;    insmod ext2&#xA;    set root='lvmid/UIHXow-y3Kc-vBsq-ogUW-OzCC-FszJ-67j45F/enyHZA-qS1r-Yvlk-753N-pHNR-Mt93-mY0pv3'&#xA;    if [ x$feature_platform_search_hint = xy ]; then&#xA;      search --no-floppy --fs-uuid --set=root --hint='lvmid/UIHXow-y3Kc-vBsq-ogUW-OzCC-FszJ-67j45F/enyHZA-qS1r-Yvlk-753N-pHNR-Mt93-mY0pv3'  9e66ef60-8278-4968-8cd8-71dfb9f6b927&#xA;    else&#xA;      search --no-floppy --fs-uuid --set=root 9e66ef60-8278-4968-8cd8-71dfb9f6b927&#xA;    fi&#xA;    linux16 /boot/vmlinuz-4.13.0-32-generic root=/dev/dm-2&#xA;    initrd16 /boot/initrd.img-4.13.0-32-generic&#xA;}&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem is that when I select &quot;elementary OS&quot; grub menu item, booting stops with error: &lt;strong&gt;ALERT! /dev/dm-2 does not exist. Dropping to a shell!&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/d2Mib.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d2Mib.jpg&quot; alt=&quot;ALERT! /dev/dm-2 does not exist. Dropping to a shell!&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &quot;rescue&quot; initramfs shell checked that &lt;code&gt;/dev/dm-2&lt;/code&gt; indeed does not exist until I run &lt;code&gt;vgchange -ay&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I'm doing wrong? Is some kernel module missing in Loki installation? If so, how can I add it? Or should be the grub menu generated somehow else? I didn't want to let Elementary installer to install boot-loader (and thus delete previous working installation)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here is my disk partitioning setup:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SSD 128GB&#xA;/dev/sda1 - 524MB boot, ext4&#xA;/dev/sda2 - 128GB LVM2 PV&#xA;    /dev/fedora/root 87GB ext4&#xA;    /dev/fedora/swap 8.3GB swap&#xA;    /dev/fedora/elementary 32GB ext4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14877" LastActivityDate="2018-06-12T18:23:49.690" Title="Loki 0.4.1 dualboot with Fedora on LVM" Tags="|release-loki|boot|grub|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15728" PostTypeId="2" ParentId="15726" CreationDate="2018-06-11T07:29:35.057" Score="0" Body="&lt;p&gt;In my experience, try to specify root parameter with /dev/mapper/fedora-elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, it goes like...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;linux16 /boot/vmlinuz-4.13.0-32-generic root=/dev/mapper/fedora-elementary&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2018-06-11T07:29:35.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15730" PostTypeId="2" ParentId="15325" CreationDate="2018-06-11T09:29:33.800" Score="0" Body="&lt;p&gt;Try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ffmpeg gstreamer1*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It helped me with my videos not being played in Loki.&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-06-11T09:29:33.800" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15731" PostTypeId="2" ParentId="15177" CreationDate="2018-06-11T10:24:10.327" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/elementary-os-juno-features/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This article&lt;/a&gt; states that it won’t be released before April but it should not be going as far as September.&lt;/p&gt;&#xA;" OwnerUserId="14884" LastEditorUserId="14884" LastEditDate="2018-06-12T17:48:01.097" LastActivityDate="2018-06-12T17:48:01.097" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15735" PostTypeId="1" CreationDate="2018-06-12T14:07:27.993" Score="2" ViewCount="548" Body="&lt;p&gt;so yesterday i decided to try linux because im tired of the uglyness of windows and because i wanted to get the closest to &lt;a href=&quot;https://venganzarte.deviantart.com/art/Elementary-Os-Sierra-Dark-Mod-660033561&quot; rel=&quot;nofollow noreferrer&quot;&gt;this look&lt;/a&gt; but &lt;a href=&quot;https://i.stack.imgur.com/IaVIE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; its what i got so far. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i dont know what to do to be honest. ive been following tutorials and everything but it just doesnt look right, even the file explorer looks different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;also the dock on the bottom is dockx but i like it like that, the one on the right is plank and ill remove it later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you know how to replicate the one on deviantart please let me know. thanks.&lt;/p&gt;&#xA;" OwnerUserId="14896" LastActivityDate="2018-12-23T00:02:05.407" Title="Trying to replicate this macOS dark sierra theme" Tags="|themes|gtk|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15736" PostTypeId="2" ParentId="15726" CreationDate="2018-06-12T18:23:49.690" Score="0" Body="&lt;p&gt;AFAIK ... I do not think you can do what you are trying to do with LVM ... LVM has a catalog file that exists in the OS you are running ... and elementary knows nothing about this LVM volume catalog in fedora ... Assuming that you just want to use LVM for both distros ... you would need to have your drive partitioned with another partition for a private volume for Elementary's LVM &quot;volumes&quot;  ... please note in this dual boot configuration ... that reading an LVM &quot;volume&quot; on one system from another's LVM is difficult at best and is probably impossible. To share part of the disk to both systems I would suggest a plain partition as maybe ext4 formatted that both can read. Sorry about the format of this answer ... still not comfortable formatting text in this.&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2018-06-12T18:23:49.690" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15739" PostTypeId="1" CreationDate="2018-06-13T18:45:13.207" Score="0" ViewCount="177" Body="&lt;p&gt;Date: June 12ish-13ish, 2018 update.&lt;br/&gt;&#xA;Suspected Cause: Kernel update from 4.13.0-43 to 4.13.0-45&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a Thinkpad T420 and just updated today. Tried watching a Youtube video and noticed my dedicated volume buttons no longer work and I had no sound. Same goes for mute speakers button and mute mic button. I can get audio to output but I have to go up and toggle on the on/off rocker and manually adjust volume from top menu bar, but only system sounds are heard nothing from the browser. What is even stranger is that when I go into sound settings it shows no output or input devices! Any advice?&lt;/p&gt;&#xA;" OwnerUserId="14905" LastEditorUserId="14905" LastEditDate="2018-06-13T23:41:57.963" LastActivityDate="2024-03-14T21:06:15.717" Title="Update Broke Audio on T420" Tags="|settings|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15740" PostTypeId="2" ParentId="15739" CreationDate="2018-06-13T23:31:14.983" Score="0" Body="&lt;p&gt;I completely removed a pulseaudio mod I installed last year and also completely purged all the audio drivers.&lt;br/&gt;&lt;br/&gt;I then installed aptitude based on some recommendations and used that to reinstall all the stock ubuntu audio drivers using --purge along with reinstall. Still after that I had no sound.&lt;br/&gt;&lt;br/&gt;The key was running this command and rebooting:&lt;br/&gt;&lt;code&gt;killall pulseaudio; rm -r ~/.config/pulse/* ; rm -r ~/.pulse*&lt;/code&gt;&lt;br/&gt;&lt;br/&gt; I stole that code from the ubuntu help page at: &lt;a href=&quot;https://help.ubuntu.com/community/SoundTroubleshootingProcedure&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/SoundTroubleshootingProcedure&lt;/a&gt;.&lt;br/&gt;&lt;br/&gt;If anyone else has problems hope this helps. I still cannot use the dedicated volume buttons on my keyboard. I'll work on that soon, at least my speakers work now.&lt;/p&gt;&#xA;" OwnerUserId="14905" LastEditorUserId="14905" LastEditDate="2018-06-13T23:36:19.297" LastActivityDate="2018-06-13T23:36:19.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15743" PostTypeId="2" ParentId="15506" CreationDate="2018-06-14T10:49:07.520" Score="2" Body="&lt;p&gt;Just download it as free of charge (like @ourfor's said), then head to &lt;a href=&quot;https://elementary.io/get-involved#funding&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;eOS funding&quot;&gt;this&lt;/a&gt;, where you can choose PayPal as your payment. Also refer to @AlphAShOOt's answer, you can become a Patron too to support elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my experience, I did download it as free and pay using PayPal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="12086" LastActivityDate="2018-06-14T10:49:07.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15746" PostTypeId="1" CreationDate="2018-06-14T15:19:45.653" Score="1" ViewCount="569" Body="&lt;p&gt;Hello I was moved to ElementaryOS from i3wm with Ubuntu and I am accustomed that the windows gain focus when I hover it by mouse instead of click.&#xA;&lt;br&gt;For me, with multi-monitors, that's really useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I setup this behavior in ElementaryOS??&#xA;Thanks for any response.&lt;/p&gt;&#xA;" OwnerUserId="14910" LastActivityDate="2023-10-19T19:30:58.613" Title="Focus window by mouse hover" Tags="|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15747" PostTypeId="1" CreationDate="2018-06-14T19:14:30.840" Score="2" ViewCount="132" Body="&lt;p&gt;I've been using elementaryOS Loki for a while but after I decided to update packages queued in my System Updates, Bluetooth, along with its icon in Wingpanel ceased to work, although I'm not entirely sure if that was the cause.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list&lt;/code&gt; output&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: ideapad_wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: ideapad_bluetooth: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;2: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running &lt;code&gt;bluetooth-wizard&lt;/code&gt; the program can't seem to find my Wireless Headphones that were working fine up to yesterday, it's just stuck in &lt;code&gt;Searching for devices...&lt;/code&gt;. Enlarging the window to properly show the device list didn't change anything, no devices appeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalling the package &lt;code&gt;bluez&lt;/code&gt; did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help with this will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="14826" LastActivityDate="2018-09-14T08:01:11.297" Title="Bluetooth no longer works after system update" Tags="|release-loki|updates|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15748" PostTypeId="1" CreationDate="2018-06-15T08:10:47.547" Score="0" ViewCount="960" Body="&lt;p&gt;ElementaryOS is the first OS that could make me switch from MacOS to the Linux side, but... I don't like Firefox, I don't like Opera, I don't like Chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the Epyphany Browser has no Bookmarks on the left (you can not add it in the settings). So fast browsing and fast Bookmark hopping? Nope.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, add the Bookmark list on the left side... and I'm in :-)&lt;/p&gt;&#xA;" OwnerUserId="14916" LastEditorUserId="14916" LastEditDate="2018-06-17T09:43:17.777" LastActivityDate="2024-03-18T06:05:20.673" Title="Where are the Bookmarks on the left side in the Epiphany Browser?" Tags="|epiphany|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15749" PostTypeId="1" CreationDate="2018-06-15T09:09:49.467" Score="0" ViewCount="149" Body="&lt;p&gt;I have a Samsung ML2165 laser printer.  When I look at printers two are shown as follows:&#xA;Samsung ML-2160 Series&#xA;Samsung ML-2165&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both are shown as ready.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing will print.  When I attempted to print a test page nothing happened, and an attempt to print a PDF also failed with a message that it was waiting for the printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think I installed the ML2160 series driver when I had the PC at home and that Loki detected the ML 2165 when I connected it here on the boat in Turkey.&lt;br&gt;&#xA;I think I probably need to delete the ML2160 series driver, and possibly both instances of the printer, and start again but how do I delete printers in Loki?&lt;/p&gt;&#xA;" OwnerUserId="12846" LastEditorUserId="12846" LastEditDate="2018-06-15T13:02:38.050" LastActivityDate="2024-03-19T19:04:55.690" Title="Cannot make Samsung ML2165 Printer work in Loki" Tags="|release-loki|settings|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15752" PostTypeId="2" ParentId="15747" CreationDate="2018-06-15T22:27:17.680" Score="0" Body="&lt;p&gt;yes its work but the discover list is so small and you can't see the devices but you can make scroll and select one, then you have to change the channel in sound settings and then you have to change the mode (maybe), sorry for my English but i hope help you&lt;/p&gt;&#xA;" OwnerUserId="14919" LastActivityDate="2018-06-15T22:27:17.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15753" PostTypeId="2" ParentId="15747" CreationDate="2018-06-16T06:07:56.210" Score="1" Body="&lt;p&gt;I am also using Lenovo Ideapad. Had the same issue.&lt;br&gt;&#xA;Turn ON bluetooth from panel, open Terminal and copy-paste this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill unblock bluetooth&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;see if this works for you!&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-06-16T06:07:56.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15758" PostTypeId="2" ParentId="15748" CreationDate="2018-06-17T11:02:32.873" Score="0" Body="&lt;p&gt;Vivaldi has a sort of file tree bookmarks browser in a left side panel (where you can also toggle on or off an additional bookmark bar). It's Chromium under the hood -- so it's compatible with most Chrome extensions -- but it has some power user-ish UI features you may appreciate.&lt;/p&gt;&#xA;" OwnerUserId="14928" LastActivityDate="2018-06-17T11:02:32.873" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="15759" PostTypeId="2" ParentId="11933" CreationDate="2018-06-17T11:35:27.927" Score="1" Body="&lt;p&gt;You might want to look into this utility: &lt;a href=&quot;http://www.nongnu.org/xbindkeys/xbindkeys.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.nongnu.org/xbindkeys/xbindkeys.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's in the repos, and there is also a configuration gui for it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache search xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;will find it.&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-06-17T11:35:27.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15763" PostTypeId="1" AcceptedAnswerId="15773" CreationDate="2018-06-18T11:51:46.823" Score="0" ViewCount="765" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pI2Zi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pI2Zi.png&quot; alt=&quot;Top&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gala and Xorg are always above 13%, even if there are no other windows except Terminator. It drains the laptop's battery and keeps the laptop's cooler always on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't remember when I first noticed it, might be a month ago, or a couple of months. But it started bothering me now because of the cooler (probably the warm weather made it worse).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's 0.4.1 Loki 64 bit, there are no updates available. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;uname -a&#xA;Linux blackbox 4.4.0-128-generic #154-Ubuntu SMP Fri May 25 14:15:18 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: It's getting even worse when the screen is off due to inactivity. The screenshot below is made using an ssh session from another computer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/k0hII.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/k0hII.png&quot; alt=&quot;40%&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14935" LastEditorUserId="14937" LastEditDate="2018-06-30T19:54:15.820" LastActivityDate="2018-06-30T19:54:15.820" Title="Gala and Xorg high CPU usage on Lenovo X220" Tags="|gala|battery|cpu|performance|xorg|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:41:31.300" ContentLicense="CC BY-SA 4.0" />
  <row Id="15767" PostTypeId="1" CreationDate="2018-06-18T21:58:56.760" Score="0" ViewCount="402" Body="&lt;p&gt;Thinking of installing elementary OS on a new, internet-only, set of workstations at the office for some of our employees. I've built some barebones PCs and want to take advantage of how lightweight elementary OS is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, on Windows, we are using Windows Remote Desktop to access employees personal computers and repair them from our remote location. We would like to have the same functionality with our OS change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, the users just provide us their network ID and ipv4 which allows access. Can this be done in elementary OS and can these workstations be accessed from out-of-network locations like cellular connections and home networks?&lt;/p&gt;&#xA;" OwnerUserId="14938" LastEditorUserId="16827" LastEditDate="2019-04-15T14:47:45.260" LastActivityDate="2019-04-15T14:47:45.260" Title="Remote access options for off-site tech support" Tags="|software-recommendation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15768" PostTypeId="2" ParentId="15767" CreationDate="2018-06-18T23:58:30.977" Score="1" Body="&lt;p&gt;It's not as elegant as other solutions but teamviewer has everything you need.&lt;/p&gt;&#xA;" OwnerUserId="14812" LastActivityDate="2018-06-18T23:58:30.977" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15769" PostTypeId="2" ParentId="15564" CreationDate="2018-06-19T00:12:54.060" Score="0" Body="&lt;p&gt;I'd also suggest checking out flatpak and snap(snacraft.io) app delivery platforms, they offer crossplatform packages, it's so convenient. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;gimp is in the flatpak one, this is the &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation guide&lt;/a&gt; for elementaryOS with their PPA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is the &lt;a href=&quot;https://flathub.org/apps/details/org.gimp.GIMP&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; to the app in the store. one of the ways to install gimp via flatpak is from the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak install https://flathub.org/repo/appstream/org.gimp.GIMP.flatpakref&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check them out, they have a lot of great apps, and they are self-updating too. &lt;/p&gt;&#xA;" OwnerUserId="14812" LastActivityDate="2018-06-19T00:12:54.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15772" PostTypeId="1" CreationDate="2018-06-19T04:18:28.410" Score="1" ViewCount="272" Body="&lt;p&gt;loki has light-locker&lt;br /&gt;&#xA;I have setup that when I close the lid of the notebook the screen locks (not suspends)&lt;br /&gt;&#xA;when I close it and then after a while open it, I have to wait a few seconds to get rid of the annoying message saying&lt;br /&gt;&lt;br /&gt;&#xA;&quot;you'll be redirected to the unlock dialog automatically in a few seconds&quot;&lt;br /&gt;&lt;br /&gt;&#xA;&lt;img src=&quot;https://3.bp.blogspot.com/-YM1dZM8XPcE/Udx2yQin1TI/AAAAAAAAPyQ/6d7dEttSczg/s320/light-locker-message.png&quot; alt=&quot;light-locker-message&quot;&gt;&lt;br /&gt;&#xA;&lt;br /&gt;&#xA;After it I get the normal lock screen where I can write the password down.&lt;br /&gt;&#xA;The sad thing is that after y pŕessed enter to submit the password I get the same black window message for a couple of seconds&lt;br /&gt;&#xA;&lt;br /&gt;&#xA;Is there a way to disable this annoying black window to go straight to the lock screen?&lt;br /&gt;&#xA;&lt;br /&gt;&#xA;I've only found this&lt;br /&gt;&#xA;&lt;a href=&quot;http://www.webupd8.org/2013/07/light-locker-new-session-locker-for.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.webupd8.org/2013/07/light-locker-new-session-locker-for.html&lt;/a&gt;&lt;br /&gt;&lt;br /&gt;&#xA;thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-06-19T04:18:28.410" Title="light-locker: strange beheavior when trying to unlock the screen/open the lid" Tags="|release-loki|greeter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15773" PostTypeId="2" ParentId="15763" CreationDate="2018-06-19T10:35:33.253" Score="0" Body="&lt;p&gt;Appears, this is a known bug: &lt;a href=&quot;https://github.com/elementary/gala/issues/135&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/135&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I added some shortcuts to Plank, rebooted the system and now everything is OK.&lt;/p&gt;&#xA;" OwnerUserId="14937" LastActivityDate="2018-06-19T10:35:33.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15774" PostTypeId="1" CreationDate="2018-06-19T11:20:57.960" Score="0" ViewCount="371" Body="&lt;p&gt;I am having these errors/warnings everytime I boot elementaryos with kernel 4.16 or kernel 4.17.2 on a ideapad 110-15isk with a i3 6006u and no dedicated graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does someone know how to fix them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RjO0A.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RjO0A.jpg&quot; alt=&quot;Errors/Warnings at boot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14944" LastActivityDate="2024-03-21T06:01:25.290" Title="ACPI errors at boot with kernel 4.17.2 and 4.16" Tags="|boot|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15775" PostTypeId="1" CreationDate="2018-06-19T11:23:11.477" Score="0" ViewCount="274" Body="&lt;p&gt;Getting this error even after installing packages manually as the depends warning continues.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Packages installed : &lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;libgegl-0.3-0&lt;/li&gt;&#xA;  &lt;li&gt;libumfpack5.7.1&lt;/li&gt;&#xA;  &lt;li&gt;libcholmod3.0.6&lt;/li&gt;&#xA;  &lt;li&gt;liblapack3&lt;/li&gt;&#xA;  &lt;li&gt;libgfortran3&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;On installing libgfortran3 the error is :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies: libgfortran3 :Depends: &#xA;gcc-5-base (= 5.3.1-14ubuntu2) but 5.4.0-6ubuntu1~16.04.9 is to be installed&#xA;&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I try to install gcc-5-base I get :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gcc-5-base&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;gcc-5-base is already the newest version (5.4.0-6ubuntu1~16.04.9).&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unable to understand and get pass this.&lt;/p&gt;&#xA;" OwnerUserId="14943" LastActivityDate="2018-12-26T01:00:55.347" Title="Unmet Dependencies and Package Broken" Tags="|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15778" PostTypeId="1" CreationDate="2018-06-19T16:39:58.190" Score="0" ViewCount="166" Body="&lt;p&gt;When I switch bluetooth off, bluetoothctl says that it's powered off but powertop says that btusb is consuming 2.5W of power, so it isn't off..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I execute &lt;code&gt;rfkill block bluetooth&lt;/code&gt; it does power it off, but I need to execute &lt;code&gt;rfkill unblock bluetooth&lt;/code&gt; when I want to use bluetooth again. Is there any other way to do what I want without using the command line?&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2023-12-23T06:04:10.460" Title="How can I turn off bluetooth while being able to turn it on from the indicator later?" Tags="|wingpanel|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15779" PostTypeId="1" CreationDate="2018-06-19T18:01:13.737" Score="1" ViewCount="115" Body="&lt;p&gt;Just randomly noticed that wingpanel is using 98GB of virtual memory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V4ben.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V4ben.png&quot; alt=&quot;gnome system monitor screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restarted it with &quot;kill -HUP&quot;, it used 97GB upon restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS version is 0.4.1. I'm relatively new to this so any input is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="14812" LastActivityDate="2018-06-19T18:01:13.737" Title="wingpanel is using almost 100GB of virtual memory" Tags="|release-loki|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15782" PostTypeId="2" ParentId="5214" CreationDate="2018-06-20T05:36:22.723" Score="1" Body="&lt;p&gt;I use fusuma, which allows you to customize the hotkey that gets sent so you can control either applications or the DE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/iberianpig/fusuma&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/iberianpig/fusuma&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14930" LastActivityDate="2018-06-20T05:36:22.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15783" PostTypeId="2" ParentId="15778" CreationDate="2018-06-20T05:42:12.443" Score="0" Body="&lt;p&gt;I had this problem as well. The solution for me was that I actually have a &quot;soft&quot; hardware key for bluetooth on my F10 key. If I have the bluetooth turned on there then btusb shows up at 100% in powertop regardless of software setting. Using the function key will turn it on and off correctly.&lt;/p&gt;&#xA;" OwnerUserId="14930" LastActivityDate="2018-06-20T05:42:12.443" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15784" PostTypeId="2" ParentId="12082" CreationDate="2018-06-20T06:01:03.023" Score="0" Body="&lt;p&gt;This really might depend on what specific laptop you have and if you have TLP or the like (laptop tools etc) installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an example of tlp causing this issue and the solution for a specific acer laptop. &#xA;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=224098&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=224098&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have powertop installed, you can can go through all of the various power state options. Disabling and enabling them individually while checking the sleep state until you find the specific hardware flag that is causing the hang. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are some other general tips: &lt;a href=&quot;https://01.org/blogs/rzhang/2015/best-practice-debug-linux-suspend/hibernate-issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://01.org/blogs/rzhang/2015/best-practice-debug-linux-suspend/hibernate-issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14930" LastActivityDate="2018-06-20T06:01:03.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15785" PostTypeId="2" ParentId="11308" CreationDate="2018-06-20T07:16:44.773" Score="0" Body="&lt;p&gt;The only requirement is to disable secureboot. You can/should leave uefi booting on. You do not necessarily need legacy support.&lt;/p&gt;&#xA;" OwnerUserId="14930" LastActivityDate="2018-06-20T07:16:44.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15788" PostTypeId="2" ParentId="14211" CreationDate="2018-06-20T15:20:51.147" Score="1" Body="&lt;p&gt;I had this problem not only with elementaryOS, but with Lubuntu as well. Its a driver problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not use the &lt;code&gt;nvidia&lt;/code&gt; drivers included in the AppCenter, this is a known bug that happens with the legacy drivers included in most LTS variations of Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix just update your drivers using nvidia's driver repo.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*&#xA;&#xA;sudo add-apt-repository ppa:graphics-drivers&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.nvidia.com/object/unix.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Check your Graphics cards for a compatible Driver&lt;/a&gt;, for example, my GPU is Nvidia GeForce GTX 1050, so it's compatible with the Latest Short Lived branch which is &lt;code&gt;nvidia-396&lt;/code&gt; as the date this answer was originally written.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nvidia-XXX&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For Elementary OS 5.0 (and other distros based on 18.04 LTS) the package name changed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nvidia-driver-XXX&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace XXX with the version your GPU is compatible with. The latest, the better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart, the problem should be fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sources: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.linuxandubuntu.com/home/how-to-install-latest-nvidia-drivers-in-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.linuxandubuntu.com/home/how-to-install-latest-nvidia-drivers-in-linux&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://devtalk.nvidia.com/default/topic/963148/linux/resume-from-suspend-freeze-the-system-all-the-times-840m-driver-340-370-ubuntu-/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://devtalk.nvidia.com/default/topic/963148/linux/resume-from-suspend-freeze-the-system-all-the-times-840m-driver-340-370-ubuntu-/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14826" LastEditorUserId="14826" LastEditDate="2020-02-12T15:01:03.217" LastActivityDate="2020-02-12T15:01:03.217" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="15789" PostTypeId="1" AcceptedAnswerId="15831" CreationDate="2018-06-20T15:36:01.143" Score="0" ViewCount="200" Body="&lt;p&gt;I would like to open notifications with key combo(sorta like gnome3 and windows do),but i dont know how to trigger it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone has idea,Id be more then happy to hear it!&lt;/p&gt;&#xA;" OwnerUserId="13111" LastActivityDate="2019-04-15T23:57:42.923" Title="Open notification center with key combo" Tags="|wingpanel|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15790" PostTypeId="2" ParentId="15774" CreationDate="2018-06-20T15:45:11.493" Score="0" Body="&lt;p&gt;First two warnings are pretty harmless.&#xA;(I have them almost a year now,on same v110-15isk like you).&#xA;As for the rest,Im not sure.&#xA;I do have Arch with 4.17 installed alongside eOS,and never saw such warnings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It could be due to Ubuntu kernel-patches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wouldnt recommend running vanilla mainland kernel on any Ubuntu based distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it means something,give HWE-edge kernel a shoot.&#xA;It boosted performance and battery life for me. &lt;/p&gt;&#xA;" OwnerUserId="13111" LastActivityDate="2018-06-20T15:45:11.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15793" PostTypeId="2" ParentId="15707" CreationDate="2018-06-21T11:10:42.657" Score="0" Body="&lt;p&gt;You can install &lt;code&gt;pavucontrol&lt;/code&gt;, more informations &lt;a href=&quot;https://freedesktop.org/software/pulseaudio/pavucontrol/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next steps work for me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open a terminal&lt;/li&gt;&#xA;&lt;li&gt;type &lt;code&gt;alsamixer&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;with the card &lt;strong&gt;HDA ATI SB with chip Realtek ALC892&lt;/strong&gt;, turn auto-mute to disabled.&lt;/li&gt;&#xA;&lt;li&gt;After that i'd install Pulse Audio Volume control.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install pavucontrol&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open it &lt;strong&gt;Pulse Audio Volume Control&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;In Configuration tab you can see the &lt;strong&gt;ATI HDMI Digital Setereo and Internal Audio&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Select to Internal Audio: &lt;strong&gt;Stereo Analog Duplex (Estéreo analógico duplex).&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;In &lt;strong&gt;Pulse Audio Volume&lt;/strong&gt;, select Ouput devices, and for Internal Analog Stereo select: analg headphones.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Important:&lt;/strong&gt; You must have installed the ATI drivers first. D Atonaltzin&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;System information&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Motherboard Gigabyte GA-880GM-USB3 (realtek ALC892 audio integrated)&lt;/li&gt;&#xA;&lt;li&gt;AMD Phenom II&lt;/li&gt;&#xA;&lt;li&gt;4GB RAM&lt;/li&gt;&#xA;&lt;li&gt;Ati Radeon RX460 2GB graphics card.alsamix&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14957" LastEditorUserId="19360" LastEditDate="2019-12-16T03:35:53.943" LastActivityDate="2019-12-16T03:35:53.943" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15796" PostTypeId="2" ParentId="14138" CreationDate="2018-06-23T00:08:20.103" Score="0" Body="&lt;p&gt;In the latest Elementary OS I had to use the verbose version of the xrandr command, including the output device, for this to work:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr --output eDP-1 --mode 1920x1080 --rate 59.93&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use the shorter version as explained in the (old) Ubuntu thread, eg. &lt;code&gt;xrandr -r 59.93&lt;/code&gt;,  nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the output device (mine is eDP-1) from the 2nd line of &lt;code&gt;xrandr&lt;/code&gt; output.  Add this as a startup application to have it set on every login. In System Settings -&gt; Applications -&gt; Tab Startup you can add a custom command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would be nice though if there was a way without adjusting xorg.conf or adding a startup script to make this permanent, since also during boot the screen flickers.  Somehow on my recent HP Probook 60.01Hz is the default rate and makes my eyes bleed (screen flickers in the dark areas), whilst using 59.93 (2nd available mode listed by xrandr) doesn't.  weird..&lt;/p&gt;&#xA;" OwnerUserId="14967" LastActivityDate="2018-06-23T00:08:20.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15797" PostTypeId="1" CreationDate="2018-06-23T13:33:55.833" Score="0" ViewCount="571" Body="&lt;p&gt;I bought the system but the link to download doesn't work. I click and nothing happen. I mean the download doesn't start. &lt;/p&gt;&#xA;" OwnerUserId="14969" LastActivityDate="2018-06-29T20:48:12.330" Title="can't download OS Elementary loki" Tags="|download|" AnswerCount="1" CommentCount="0" ClosedDate="2018-07-30T19:50:37.713" ContentLicense="CC BY-SA 4.0" />
  <row Id="15799" PostTypeId="1" CreationDate="2018-06-24T03:20:15.387" Score="2" ViewCount="1708" Body="&lt;p&gt;I'm having some problems with my headphones(i'm using a combo jack), if i reproduce song is there no problem for that, but if i try to use the mic, doesn't work! I've try with doing a override, and only one app can use the microphone and that is SimpleScreenRecorder, but i need the microphone for Skype,Discord or even TS3.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do anyone have a idea?, if you help me, you are going to be my hero!&lt;/p&gt;&#xA;" OwnerUserId="14976" LastActivityDate="2024-03-27T16:06:30.750" Title="Microphone, not working after a lot of work!" Tags="|audio|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15801" PostTypeId="1" CreationDate="2018-06-24T18:56:39.890" Score="0" ViewCount="498" Body="&lt;p&gt;I am currently running Elementary OS inside VirtualBox on a MacBook Pro. I freshly installed elementary OS, updated and upgraded everything, installed VirtualBox Guest Additions, and ran &lt;code&gt;sudo apt install virtualbox-guest-dkms&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Immediately after the upgrade, Gala began using a large amount of the CPU. This is fixed by killing Gala after logging in. When Gala restarts there seem to be no further problems and everything is fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have plenty of RAM, CPU cores, and Video Memory allotted in VirtualBox settings. I also have 3D acceleration enabled (same issue even when it is disabled). Is this just a bug or do I need to further configure elementary OS for VirtualBox? &lt;/p&gt;&#xA;" OwnerUserId="14980" LastActivityDate="2019-08-26T07:02:45.440" Title="Gala high CPU usage in VirtualBox" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15806" PostTypeId="1" CreationDate="2018-06-26T08:44:15.287" Score="0" ViewCount="374" Body="&lt;p&gt;I have an Asus &lt;strong&gt;&lt;em&gt;X541UJ&lt;/em&gt;&lt;/strong&gt;.&#xA;When I try to discover for a device the Discover Device Window doesn't shows nothing even if it leaves it open for several minutes. I've already tried to resize the Discover Device Window but same.&#xA;The same happens using &lt;strong&gt;blueman&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The bluetooth seems unlocked:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;giuseppe@giuseppe-X541UJ:~$ rfkill list&#xA;0: phy0: Wireless LAN&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;1: hci0: Bluetooth&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;While when checking the status I have this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;giuseppe@giuseppe-X541UJ:~$ /etc/init.d/bluetooth status&#xA;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)&#xA;   Active: active (running) since mar 2018-06-26 10:14:58 CEST; 17min ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 1553 (bluetoothd)&#xA;   Status: &quot;Running&quot;&#xA;   CGroup: /system.slice/bluetooth.service                                                                                                                                                                           &#xA;           └─1553 /usr/lib/bluetooth/bluetoothd                                                                                                                                                                      &#xA;&#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Not enough free handles to register service                                                                                                                        &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Not enough free handles to register service                                                                                                                        &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Current Time Service could not be registered                                                                                                                       &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: gatt-time-server: Input/output error (5)                                                                                                                           &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Not enough free handles to register service                                                                                                                        &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Not enough free handles to register service                                                                                                                        &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: Sap driver initialization failed.                                                                                                                                  &#xA;giu 26 10:14:58 giuseppe-X541UJ bluetoothd[1553]: sap-server: Operation not permitted (1)                                                                                                                            &#xA;giu 26 10:15:06 giuseppe-X541UJ bluetoothd[1553]: Endpoint registered: sender=:1.56 path=/MediaEndpoint/A2DPSource                                                                                                   &#xA;giu 26 10:15:06 giuseppe-X541UJ bluetoothd[1553]: Endpoint registered: sender=:1.56 path=/MediaEndpoint/A2DPSink   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have already searched the net but I can not find a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried to change linux-firmware but it does not change anything, now I have the version: &lt;strong&gt;1.157.18&lt;/strong&gt;.&#xA;While for the kernel version: &lt;strong&gt;4.15.0-23-generic&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am also attaching some general information on my pc if they can be useful:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;giuseppe@giuseppe-X541UJ:~$ inxi -F                                                                                                                                                                                      &#xA;System:    Host: giuseppe-X541UJ Kernel: 4.15.0-23-generic x86_64 (64 bit) Desktop: Gnome 3.18.5&#xA;           Distro: elementary 0.4 loki&#xA;Machine:   System: ASUSTeK (portable) product: X541UJ v: 1.0&#xA;           Mobo: ASUSTeK model: X541UJ v: 1.0 Bios: American Megatrends v: X541UJ.302 date: 03/30/2017&#xA;CPU:       Dual core Intel Core i7-7500U (-HT-MCP-) cache: 4096 KB &#xA;           clock speeds: max: 3500 MHz 1: 600 MHz 2: 566 MHz 3: 597 MHz 4: 588 MHz&#xA;Graphics:  Card-1: Intel Device 5916&#xA;           Card-2: NVIDIA GK208M [GeForce 920M]&#xA;           Display Server: X.Org 1.19.5 drivers: (unloaded: fbdev,vesa)&#xA;           Resolution: 1920x1080@60.01hz, 1920x1080@60.00hz&#xA;           GLX Renderer: Mesa DRI Intel HD Graphics 620 (Kaby Lake GT2) GLX Version: 3.0 Mesa 17.2.8&#xA;Audio:     Card Intel Device 9d71 driver: snd_hda_intel Sound: ALSA v: k4.15.0-23-generic&#xA;Network:   Card-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller driver: r8169&#xA;           IF: enp2s0f2 state: down mac: 60:45:cb:b6:2c:1a&#xA;           Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter driver: rtl8723be&#xA;           IF: wlp3s0 state: up mac: 3c:a0:67:2b:25:29&#xA;Drives:    HDD Total Size: 250.1GB (40.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 250.1GB&#xA;Partition: ID-1: / size: 221G used: 87G (42%) fs: ext4 dev: /dev/sda2&#xA;           ID-2: swap-1 size: 8.47GB used: 0.00GB (0%) fs: swap dev: /dev/sda3&#xA;RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present&#xA;Sensors:   System Temperatures: cpu: 43.0C mobo: N/A&#xA;           Fan Speeds (in rpm): cpu: N/A&#xA;Info:      Processes: 261 Uptime: 26 min Memory: 2763.0/7858.7MB Client: Shell (bash) inxi: 2.2.35 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This problem has afflicted me for months.&#xA;&lt;strong&gt;Thank you all for your help&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="14994" LastActivityDate="2019-10-19T18:17:04.880" Title="Bluetooth can not find any devices" Tags="|release-loki|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15808" PostTypeId="2" ParentId="15799" CreationDate="2018-06-26T17:45:12.127" Score="0" Body="&lt;p&gt;Somehow I managed to mess up my sound system. After a lot of searching I found that installing DKMS (&lt;code&gt;sudo apt-get install dkms&lt;/code&gt;) and then going to the daily builds audio snapshot from the Ubuntu team &lt;a href=&quot;https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+packages&lt;/a&gt; and downloading the latest package for Ubuntu 16.04 more or less did the trick. At least it restored my audio connections. ALSA was still messed up (and I had not used alsamixer before this on this particular machine) so I reset that by running &lt;code&gt;alsactl -d&lt;/code&gt; Finally all was restored!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think I spent about 5 hours trying to get sound sorted and only by rebuilding the sound stack in this way have I been able to use the likes of Skype, Telegram and web based meeting systems again!&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-06-26T17:45:12.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15810" PostTypeId="1" CreationDate="2018-06-26T20:43:05.390" Score="0" ViewCount="42" Body="&lt;p&gt;I am just starting out with Elementary OS and Linux as a whole. I created a copy of Elementary OS yesterday on a desktop with an AMD APU. I plan to install it onto my old laptop with an Intel APU. Will downloading from my AMD powered desktop change the source code, and if so will that mean I can't use the image I downloaded from the desktop? If it helps, both chips are 64-bit.&lt;/p&gt;&#xA;" OwnerUserId="14999" LastEditorUserId="14999" LastEditDate="2018-06-26T21:32:37.680" LastActivityDate="2019-04-25T00:01:10.190" Title="Installing from an AMD onto Intel chip" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15813" PostTypeId="1" CreationDate="2018-06-28T01:55:27.273" Score="1" ViewCount="45" Body="&lt;p&gt;I have three pages of applications in my launcher, but I find it difficult to access the second page of applications because of how sensitive the horizontal scrolling is in the launcher. When using other applications (i.e. my browser), I don't find the scroll speed to be an issue, however. Is there a way to configure the scroll speed for slingshot?&lt;/p&gt;&#xA;" OwnerUserId="15010" LastActivityDate="2018-06-28T01:55:27.273" Title="Horizontal scrolling in Slingshot application launcher is very sensitive" Tags="|release-loki|slingshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15816" PostTypeId="2" ParentId="15810" CreationDate="2018-06-28T15:20:26.733" Score="1" Body="&lt;p&gt;There should not be any problem. Both Intel x86_64 CPUs and AMD64 CPUS implement the same specifications. &lt;/p&gt;&#xA;" OwnerUserId="7149" LastActivityDate="2018-06-28T15:20:26.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15817" PostTypeId="2" ParentId="15775" CreationDate="2018-06-28T16:09:37.010" Score="1" Body="&lt;p&gt;&lt;strong&gt;libgfortran3&lt;/strong&gt; depends on &lt;strong&gt;gcc-5-base&lt;/strong&gt; version &lt;em&gt;5.3.1-14ubuntu2&lt;/em&gt;. But you have version &lt;em&gt;5.4.0-6ubuntu1~16.04.9&lt;/em&gt;. Downgrading &lt;strong&gt;gcc-5-base&lt;/strong&gt; to required version should solve your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To downgrade to required version, run this command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gcc-5-base=5.3.1-14ubuntu2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7149" LastActivityDate="2018-06-28T16:09:37.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15821" PostTypeId="2" ParentId="15703" CreationDate="2018-06-28T21:08:39.960" Score="0" Body="&lt;p&gt;I don't think that's a standard repository; it's an add-on repository and the error means that there is no &quot;Xenial&quot; release for it.&#xA;At some point you must have added this repository to add some software that wasn't supplied by Elementary. You should probably remove this PPA, otherwise it doesn't hurt leaving it because the error is specific to that PPA and not the rest of your system.&#xA;Perform this at the command line to make sure your system is up to date and ignore the PPA error, sudo apt update &amp;amp;&amp;amp; apt upgrade&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-06-28T21:08:39.960" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15829" PostTypeId="2" ParentId="15806" CreationDate="2018-06-29T20:41:23.883" Score="0" Body="&lt;p&gt;Have you seen this Stack Overflow answer &#xA;&lt;a href=&quot;https://stackoverflow.com/questions/29891254/bluez-5-30-not-enough-free-handles-to-register-service-error-in-starting-blue#34811925&quot;&gt;bluez 5.30: “Not enough free handles to register service” error in starting bluetoothd&lt;/a&gt;&#xA;and &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=195886&amp;amp;p=2&quot; rel=&quot;nofollow noreferrer&quot;&gt;the thread mentioned there&lt;/a&gt;?&lt;/p&gt;&#xA;" OwnerUserId="15024" LastEditorUserId="8517" LastEditDate="2019-04-23T10:04:41.793" LastActivityDate="2019-04-23T10:04:41.793" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15830" PostTypeId="2" ParentId="15797" CreationDate="2018-06-29T20:48:12.330" Score="1" Body="&lt;p&gt;You mean, you paid money here, &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;eOS home page&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but you did not get to download the elementary OS distro?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your support. &#xA;Just go back and put a zero in the custom amount field. You should now see a download button that works.&lt;/p&gt;&#xA;" OwnerUserId="15024" LastActivityDate="2018-06-29T20:48:12.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15831" PostTypeId="2" ParentId="15789" CreationDate="2018-06-29T21:49:01.167" Score="1" Body="&lt;p&gt;The command in terminal is: switchboard settings://notifications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you enter this command in the Keyboard/Shortcuts as a new shortcut and enter an 'accelerator' (a key combination) this should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9qVCr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9qVCr.png&quot; alt=&quot;Ctrl-F12 as a shortcut to the notifications center&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15024" LastActivityDate="2018-06-29T21:49:01.167" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15834" PostTypeId="1" CreationDate="2018-06-30T16:03:58.083" Score="0" ViewCount="947" Body="&lt;p&gt;I am new to Linux. Moved from windows 10, Loving elementary OS. But need help with small things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Adobe Acrobat reader.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I selected a saved .pdf file -&gt; Right Click -&gt; choose properties -&gt; selected Adobe Acrobat Reader.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I click on the file and I get an error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GaLEY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GaLEY.png&quot; alt=&quot;PFD File Association Error - Adobe Acrobat in elementary OS&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open Acrobat reader and try opening the PDF file from in there, it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Requesting help to fix this issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&lt;BR&gt;&#xA;JagD&lt;/p&gt;&#xA;" OwnerUserId="15029" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:33.407" LastActivityDate="2019-05-08T10:04:33.407" Title="File Association - Adobe Acrobat Reader (elementary OS - Loki)" Tags="|release-loki|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15835" PostTypeId="2" ParentId="15834" CreationDate="2018-06-30T16:15:27.717" Score="1" Body="&lt;p&gt;Adobe Acrobat Reader is not supported for Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There’s a build in app for PDFs in elementary (In my opinion better than adobe reader).&#xA;You can also try other alternative apps - just google it (&lt;a href=&quot;http://www.linuxandubuntu.com/home/9-best-alternatives-to-adobe-reader-on-linux-ebookpdf-readers&quot; rel=&quot;nofollow noreferrer&quot;&gt;first website that comes up&lt;/a&gt;). Calibre and Okular are pretty popular for example.&lt;/p&gt;&#xA;" OwnerUserId="7532" LastActivityDate="2018-06-30T16:15:27.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15839" PostTypeId="1" AcceptedAnswerId="15841" CreationDate="2018-07-01T07:25:05.060" Score="0" ViewCount="209" Body="&lt;p&gt;Default icons of default folders in file manager are gone even though I am using default theme and icons. (checkout image below)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/odJAa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/odJAa.png&quot; alt=&quot;elementary os loki default folder icons missing&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please  help me.&lt;/p&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-07-02T14:43:23.990" Title="Icons of default folder are gone" Tags="|release-loki|icons|folder|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15841" PostTypeId="2" ParentId="15839" CreationDate="2018-07-02T14:43:23.990" Score="1" Body="&lt;p&gt;Found the solution from reddit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure the contents of &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_DESKTOP_DIR=&quot;$HOME/Desktop&quot;&#xA;XDG_DOCUMENTS_DIR=&quot;$HOME/Documents&quot;&#xA;XDG_DOWNLOAD_DIR=&quot;$HOME/Downloads&quot;&#xA;XDG_MUSIC_DIR=&quot;$HOME/Music&quot;&#xA;XDG_PICTURES_DIR=&quot;$HOME/Pictures&quot;&#xA;XDG_PUBLICSHARE_DIR=&quot;$HOME/Public&quot;&#xA;XDG_TEMPLATES_DIR=&quot;$HOME/Templates&quot;&#xA;XDG_VIDEOS_DIR=&quot;$HOME/Videos&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9031" LastActivityDate="2018-07-02T14:43:23.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15842" PostTypeId="1" AcceptedAnswerId="15855" CreationDate="2018-07-02T16:59:08.293" Score="3" ViewCount="5086" Body="&lt;p&gt;I've got trouble - wi-fi not working on 4.15.0-24-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried rebuild module:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Building initial module for 4.15.0-24-generic&#xA;ERROR (dkms apport): kernel package linux-headers-4.15.0-24-generic is not supported&#xA;Error! Bad return status for module build on kernel: 4.15.0-24-generic (x86_64)&#xA;Consult /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/make.log for more information.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;wi-fi controller:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now on old kernel -  4.13.0-45-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/make.log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DKMS make.log for bcmwl-6.30.223.271+bdcom for kernel 4.15.0-24-generic (x86_64)&#xA;Mon Jul  2 19:49:31 MSK 2018&#xA;make: Entering directory '/usr/src/linux-headers-4.15.0-24-generic'&#xA;CFG80211 API is prefered for this kernel version&#xA;Using CFG80211 API&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.o&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c: In function ‘osl_os_get_image_block’:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:1083:26: warning: passing argument 2 of ‘kernel_read’ makes pointer from integer without a cast [-Wint-conversion]&#xA;  rdlen = kernel_read(fp, fp-&amp;gt;f_pos, buf, len);&#xA;                          ^&#xA;In file included from ./include/linux/huge_mm.h:7:0,&#xA;                 from ./include/linux/mm.h:463,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/include/linuxver.h:65,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:25:&#xA;./include/linux/fs.h:2858:16: note: expected ‘void *’ but argument is of type ‘loff_t {aka long long int}’&#xA; extern ssize_t kernel_read(struct file *, void *, size_t, loff_t *);&#xA;                ^&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:1083:37: warning: passing argument 3 of ‘kernel_read’ makes integer from pointer without a cast [-Wint-conversion]&#xA;  rdlen = kernel_read(fp, fp-&amp;gt;f_pos, buf, len);&#xA;                                     ^&#xA;In file included from ./include/linux/huge_mm.h:7:0,&#xA;                 from ./include/linux/mm.h:463,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/include/linuxver.h:65,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:25:&#xA;./include/linux/fs.h:2858:16: note: expected ‘size_t {aka long unsigned int}’ but argument is of type ‘char *’&#xA; extern ssize_t kernel_read(struct file *, void *, size_t, loff_t *);&#xA;                ^&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:1083:42: warning: passing argument 4 of ‘kernel_read’ makes pointer from integer without a cast [-Wint-conversion]&#xA;  rdlen = kernel_read(fp, fp-&amp;gt;f_pos, buf, len);&#xA;                                          ^&#xA;In file included from ./include/linux/huge_mm.h:7:0,&#xA;                 from ./include/linux/mm.h:463,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/include/linuxver.h:65,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.c:25:&#xA;./include/linux/fs.h:2858:16: note: expected ‘loff_t * {aka long long int *}’ but argument is of type ‘int’&#xA; extern ssize_t kernel_read(struct file *, void *, size_t, loff_t *);&#xA;                ^&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c: In function ‘wl_init_timer’:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:2359:2: error: implicit declaration of function ‘init_timer’ [-Werror=implicit-function-declaration]&#xA;  init_timer(&amp;amp;t-&amp;gt;timer);&#xA;  ^&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:2360:10: error: ‘struct timer_list’ has no member named ‘data’&#xA;  t-&amp;gt;timer.data = (ulong) t;&#xA;          ^&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:2361:20: error: assignment from incompatible pointer type [-Werror=incompatible-pointer-types]&#xA;  t-&amp;gt;timer.function = wl_timer;&#xA;                    ^&#xA;cc1: some warnings being treated as errors&#xA;scripts/Makefile.build:332: recipe for target '/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o' failed&#xA;make[1]: *** [/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o] Error 1&#xA;Makefile:1552: recipe for target '_module_/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build' failed&#xA;make: *** [_module_/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build] Error 2&#xA;make: Leaving directory '/usr/src/linux-headers-4.15.0-24-generic'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15039" LastActivityDate="2018-07-04T18:31:39.027" Title="BCM43142 and linux kernel 4.15.0-24-generic" Tags="|wifi|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15846" PostTypeId="2" ParentId="13161" CreationDate="2018-07-03T01:29:01.183" Score="1" Body="&lt;p&gt;Strange, I have a CDW 9330 printer and it works well. Scanning does not. I gave up on that. So, I can understand the madness. Please breathe deeply and try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, test if you can reach the printer from your eOS machine by pinging it. Printing over WLAN is notoriously unreliable in our house. There really are differences between devices.To rule this out, connect your computer via Ethernet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, try to remove the drivers you installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the network printer install option in eOS. It worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that still does not work, you will have to dive into cups, which should be installed on your machine. If not get it from cups.org&lt;/p&gt;&#xA;&#xA;&lt;p&gt;CUPS has a web interface. See: &lt;a href=&quot;http://localhost:631&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you get here, you can be sure you will get your printer working. CUPS is that good. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to the Administration Tab under Printers and click Manage Printers to see what is currently installed. If empty, add your printer and test it.&lt;/p&gt;&#xA;" OwnerUserId="15024" LastActivityDate="2018-07-03T01:29:01.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15848" PostTypeId="1" CreationDate="2018-07-03T04:42:08.087" Score="0" ViewCount="106" Body="&lt;p&gt;Seem to have broken the updates somehow.  This may have happened after I tried a manual install of a package; I thought only a single package would need to be managed, but perhaps this causes the error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;End result, updates not working.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: GPG error: http://nz.archive.ubuntu.com/ubuntu xenial-updates Release: &#xA;The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key &amp;lt;ftpmaster@ubuntu.com&amp;gt;&#xA;E: The repository 'http://nz.archive.ubuntu.com/ubuntu xenial-updates Release' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: GPG error: http://security.ubuntu.com/ubuntu xenial-security Release: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key &amp;lt;ftpmaster@ubuntu.com&amp;gt;&#xA;E: The repository 'http://security.ubuntu.com/ubuntu xenial-security Release' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: GPG error: http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial Release: The following signatures were invalid: BADSIG BF36996C4E1F8A59 Launchpad PPA for elementary OS team&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial Release' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I located the gpg file at the repository and tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl http://http://nz.archive.ubuntu.com/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/ubuntu/dists/xenial-updates/Release.gpg | sudo apt-key add - &#xA;% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current&#xA;                             Dload  Upload   Total   Spent    Left  Speed&#xA;&#xA;  0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0&#xA;curl: (6) Could not resolve host: http&#xA;gpg: no valid OpenPGP data found.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can anyone help on this one please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="15044" LastActivityDate="2024-04-05T12:00:20.380" Title="Missing or invalid PGP blocking updates on Elementary OS" Tags="|updates|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15849" PostTypeId="2" ParentId="15848" CreationDate="2018-07-03T05:12:01.193" Score="0" Body="&lt;p&gt;Interesting thing; posted message, few mins later &lt;strong&gt;Updates available&lt;/strong&gt; popped up, 121 updates installed with no issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps a daemon fixed it.  ;-)&lt;/p&gt;&#xA;" OwnerUserId="15044" LastActivityDate="2018-07-03T05:12:01.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15852" PostTypeId="2" ParentId="14267" CreationDate="2018-07-03T12:51:27.740" Score="0" Body="&lt;p&gt;It can also be the problem of the keyboard. 3 days ago, I had frights ... Nothing was working properly on my LinuxLite. I go over the details but in fact, I realized that the Ctrl key on my keyboard was locked in the depressed position. It came from the battery cover of the keyboard which was badly put back in place (Logitech K230) and it blocked the key. Everything is normal again afterwards.&lt;/p&gt;&#xA;" OwnerUserId="15040" LastActivityDate="2018-07-03T12:51:27.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15853" PostTypeId="1" CreationDate="2018-07-03T12:55:17.717" Score="0" ViewCount="235" Body="&lt;p&gt;This morning, after a regular system including security update, my wifi driver was knocked off, no wifi appeared in network anymore&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo lshw -C network&#xA;returned:&lt;br&gt;&#xA;  *-network&lt;br&gt;&#xA;       description: Ethernet interface&#xA;       product: NetXtreme BCM57765 Gigabit Ethernet PCIe&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: enp2s0&#xA;       version: 10&#xA;       serial: c8:2a:14:03:4c:09&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi msix pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.137 firmware=57765-v1.37 latency=0 link=no multicast=yes port=twisted pair&#xA;       resources: irq:16 memory:b0400000-b040ffff memory:b0410000-b041ffff&#xA;  *-network UNCLAIMED&#xA;       description: Network controller&#xA;       product: BCM4331 802.11a/b/g/n&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       version: 02&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:b0600000-b0603fff&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I followed those instructions, but my wifi driver still wont work:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b43 - No Internet access&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do not have any other means of Internet access from Ubuntu, then you will have to download the firmware from another computer with Internet access, from an existing OS on another partition, or before you install Ubuntu. You will also need the b43-fwcutter package which is usually included on the install media or can be downloaded from the official online repositories.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Install the b43-fwcutter package. This is usually located on the Ubuntu install media under /cdrom/pool/main/b/b43-fwcutter/ or you can download the binary '.deb' package by following the links on launchpad.&#xA;&#xA;Double click on the package to install or in a Terminal issue the following commands:&#xA;&#xA;&#xA;cd /cdrom/pool/main/b/b43-fwcutter/&#xA;sudo dpkg -i b43-fwcutter* &#xA;&#xA;On a computer with Internet access, download the required firmware file:&#xA;&#xA;b43legacy - http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o&#xA;b43 (12.04 Precise Pangolin) - http://mirror2.openwrt.org/sources/broadcom-wl-5.10.56.27.3_mipsel.tar.bz2&#xA;b43 (14.04 Trusty Tahr) - http://www.lwfinger.com/b43-firmware/broadcom-wl-5.100.138.tar.bz2&#xA;&#xA;For the latest information on what files to download see http://wireless.kernel.org/en/users/Drivers/b43#Other_distributions_not_mentioned_above and http://wireless.kernel.org/en/users/Drivers/b43/developers .&#xA;&#xA;Copy the downloaded file to your home folder. Open a new Terminal and use b43-fwcutter to extract and install the firmware:&#xA;&#xA;b43legacy&#xA;&#xA;sudo b43-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o&#xA;&#xA;b43 (12.04 Precise Pangolin)&#xA;&#xA;tar xfvj broadcom-wl-5.10.56.27.3_mipsel.tar.bz2&#xA;sudo b43-fwcutter -w /lib/firmware broadcom-wl-5.10.56.27.3/driver/wl_apsta/wl_prebuilt.o&#xA;&#xA;b43 (14.04 Trusty Tahr)&#xA;&#xA;tar xfvj broadcom-wl-5.100.138.tar.bz2&#xA;sudo b43-fwcutter -w /lib/firmware broadcom-wl-5.100.138/linux/wl_apsta.o&#xA;&#xA;Restart the computer or reload the b43/b43legacy module as outlined in the Switching between drivers section below (replace b43 with b43legacy where appropriate). &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem is that the b43-cutter install worked, even updated while I connected over cable, but the b43 driver install went through once but was not recognized by the system, still in the same state.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2018-07-03T12:55:17.717" Title="Wifi disabled after security update Loki" Tags="|release-loki|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15855" PostTypeId="2" ParentId="15842" CreationDate="2018-07-03T15:43:50.037" Score="3" Body="&lt;p&gt;I had to download the package for 18.04LTS (&lt;a href=&quot;https://packages.ubuntu.com/bionic/bcmwl-kernel-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.ubuntu.com/bionic/bcmwl-kernel-source&lt;/a&gt;) and install  it using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge bcmwl-kernel-source&#xA;sudo dpkg -i bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu4_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14372" LastActivityDate="2018-07-03T15:43:50.037" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="15856" PostTypeId="1" AcceptedAnswerId="16096" CreationDate="2018-07-03T20:24:02.680" Score="1" ViewCount="2057" Body="&lt;p&gt;I've installed Elementary OS 0.4.1 Loki (64 bit) on a Lenovo with Intel Corporation Sky Lake Integrated Graphics. The install process went fine and it generally works great with kernel Linux 4.13.0-32-generic. With any newer kernel there's a graphics issue that causes the screen to simply be black, not allowing the decryption password prompt to ever appear (graphically). That, however, is not my problem - since, as I said, kernel 32 generally works well. But there is something that has happened twice now. The first time it happened I wasn't able to find a solution and ended up reinstalling the OS. But I would really, really prefer not to do that again. So any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, which I've haven't determined yet, the system will very randomly freeze, and when I perform a hard reset (holding down the power button), once it boots again it simply shows the glowing elementary logo. I've gone into grub and edited the boot parameters to remove &lt;code&gt;quiet splash&lt;/code&gt; and add &lt;code&gt;nomodeset&lt;/code&gt; but the only thing that gets printed is&lt;code&gt;Loading Linux 4.13.0-32-generic&lt;/code&gt; and &lt;code&gt;Loading initial ramdisk&lt;/code&gt;, at which point it hangs. I've even also added &lt;code&gt;debug&lt;/code&gt; and &lt;code&gt;ignore_loglevel&lt;/code&gt; to the boot parameters but no other information gets printed to the screen during boot. Further, it doesn't seem like it's just a specific kernel issue because even when I attempt to boot with the other kernels I have installed it hangs at the same place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried to use &lt;code&gt;boot-repair&lt;/code&gt; but the problem persists. For brevity, here's the log created by it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/raw/3wW2YTv0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/raw/3wW2YTv0&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've looked through the logs of my system and they don't reveal much.. but it does seem that this was logged just before the system froze the last time:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it seems like this isn't simply an issue with the kernel, as when I try to select different kernels that are installed via the grub menu they all get stuck at the same point noted above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further, I've made &lt;code&gt;timeshift&lt;/code&gt; backups and restoring to such backups achieves nothing. The boot still hangs at the same point. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that I can successfully boot into recovery mode, which is how I'm writing this message now. But of course, I would prefer to be able to boot and for the system to operate normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone encountered this as well (&amp;amp; solved it)? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="15052" LastActivityDate="2018-08-16T11:16:38.330" Title="Boot process stuck at 'Loading initial ramdisk'" Tags="|boot|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15858" PostTypeId="2" ParentId="9498" CreationDate="2018-07-04T08:07:41.763" Score="1" Body="&lt;p&gt;In case of worst case scenario, which is not the case in this posting, if you would ever consider a re-install, I made things really easy for you:&#xA;&lt;a href=&quot;http://www.leeuwtje-productions.me/en/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.leeuwtje-productions.me/en/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just install a fresh Eos system, download the tool and install a complete elementary system set of software automatically!&lt;/p&gt;&#xA;" OwnerUserId="15054" LastActivityDate="2018-07-04T08:07:41.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15872" PostTypeId="2" ParentId="15471" CreationDate="2018-07-05T09:08:26.120" Score="0" Body="&lt;p&gt;This could easily depend on whether your model has an Optimus GPU installed - power management for that's notoriously poor. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;If you do, then you'll need some tweaks to allow it to save power (&lt;a href=&quot;http://www.thinkwiki.org/wiki/Switchable_Graphics&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.thinkwiki.org/wiki/Switchable_Graphics&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Otherwise, look to the usual suspects for a T-series Thinkpad; TLP or Thinkfan. Go &amp;amp; check out thinkwiki for the T420 it's your go-to place for Thinkpad tips.&lt;/p&gt;&#xA;" OwnerUserId="4267" LastActivityDate="2018-07-05T09:08:26.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15873" PostTypeId="1" CreationDate="2018-07-05T09:08:54.163" Score="1" ViewCount="253" Body="&lt;p&gt;I have come to this issue since yesterday that the only way I can get internet from using my computer is by sharing my phone's connection via USB. My wifi card seems like it is not even activated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running ElementaryOS Loki and it worked fine until I woke up my computer from sleep mode yesterday.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It should be important to know that I am running a dual boot and that wifi works fine on my Windows 7 system so it is not a hardware issue. When I run &lt;code&gt;lspci -nn | grep -i network&lt;/code&gt; I get :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0a:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried updating my network card's drivers but it didn't work, at this point I don't really know what to to to get internet back normally on my computer..&#xA;Does any of you know where the issue come from and/or how to fix this?&#xA;I believe it could be the drivers not installing properly since there are a bunch of errors when I install them, in particular &lt;code&gt;modprobe: FATAL: Module wl not found in directory /lib/modules/4.15.0-24-generic&lt;/code&gt; which I don't know how to fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="15076" LastActivityDate="2024-04-07T03:01:35.287" Title="Wifi card not working Loki" Tags="|release-loki|wifi|networking|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15874" PostTypeId="2" ParentId="10406" CreationDate="2018-07-05T12:45:00.730" Score="0" Body="&lt;p&gt;I had a similar problem with Gala (Elementary OS 0.4.1 Loki virtualized in VirtualBox 5.2.14 on a Mac with OS 10.11.6). After killing the gala process and running the command &quot;gala -r &amp;amp;&quot; in the background, the CPU shows a normal behavior again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's just a workaround.&lt;/p&gt;&#xA;" OwnerUserId="15079" LastActivityDate="2018-07-05T12:45:00.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15875" PostTypeId="2" ParentId="15873" CreationDate="2018-07-05T13:28:52.263" Score="0" Body="&lt;p&gt;Broadcom drivers reported to broke for many users after the kernel update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take a look at this post: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15842/bcm43142-and-linux-kernel-4-15-0-24-generic/15855#15855&quot;&gt;BCM43142 and linux kernel 4.15.0-24-generic&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14372" LastActivityDate="2018-07-05T13:28:52.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15876" PostTypeId="1" CreationDate="2018-07-05T15:37:21.597" Score="0" ViewCount="619" Body="&lt;p&gt;After updating nVidia:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Instead of graphic splash screen with elementary logo, system boots in a verbose text mood&lt;/li&gt;&#xA;&lt;li&gt;At the end, when XWindows starts, the screen just flickers&lt;/li&gt;&#xA;&lt;li&gt;I cannot even open a non graphic terminal; it says that Ctrl+Alt+F1 shows a login prompt, but soon after, the screen flickers again&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I could not post a picture. It wouldn't have been helpful, anyway. It just flickers between blank and tiny parallel vertical lines, indicative of wrong scan speed or driver for the graphic card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system is an old laptop.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell XPS M1330&lt;/li&gt;&#xA;&lt;li&gt;Intel core2 duo 1.66GHz&lt;/li&gt;&#xA;&lt;li&gt;1024 MB 667MHz DDR2 SDRAM&lt;/li&gt;&#xA;&lt;li&gt;NB8M-GS nVidia graphic controller&lt;/li&gt;&#xA;&lt;li&gt;Screen 1280 x 800 13&quot;&lt;/li&gt;&#xA;&lt;li&gt;DVD/WR &lt;/li&gt;&#xA;&lt;li&gt;WIFI&lt;/li&gt;&#xA;&lt;li&gt;HDMI sound&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;How do I get graphic boot and login back?&lt;br&gt;&#xA;How do I login to a terminal at the mean time?&lt;br&gt;&#xA;How do I modify the run level to stop x11 from lunching allowing me to troubleshoot?&#xA;Is there any other suggestion?&lt;/p&gt;&#xA;" OwnerUserId="15080" LastEditorUserId="15074" LastEditDate="2018-07-13T05:50:03.707" LastActivityDate="2023-12-15T15:02:35.267" Title="Black flickering login screen after update" Tags="|system-installation|updates|display|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15879" PostTypeId="2" ParentId="15876" CreationDate="2018-07-05T20:36:32.113" Score="0" Body="&lt;p&gt;I have a similar problem too, on Nvidia's driver version 304xx. When I install the proprietary graphical drivers the elementary doesn't show up after login, it justs keep &quot;loading&quot; and gets back to login screen, my graphic card is a Nvidia Geforce 7050/ nforce 630i and I installed the drivers via apt using the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y nvidia-304&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y nvidia-xconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;afterwards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to use the &lt;strong&gt;open source driver&lt;/strong&gt;, it works well but you'll have problems to watch videos on older PCs.&lt;/p&gt;&#xA;" OwnerUserId="15085" LastEditorUserId="19360" LastEditDate="2019-12-06T05:09:17.350" LastActivityDate="2019-12-06T05:09:17.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15887" PostTypeId="1" CreationDate="2018-07-06T21:21:39.387" Score="0" ViewCount="232" Body="&lt;p&gt;Aloha:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How would one install the PPA:detly/mactel-utils package into (onto) elementary os (loki)?&lt;/p&gt;&#xA;" OwnerUserId="15019" LastActivityDate="2018-07-07T05:52:26.183" Title="How does one perform a PPA Installation" Tags="|release-loki|ppa|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-04T22:01:09.117" ContentLicense="CC BY-SA 4.0" />
  <row Id="15888" PostTypeId="2" ParentId="15887" CreationDate="2018-07-07T05:52:26.183" Score="2" Body="&lt;p&gt;This should do the trick:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:detly/mactel-utils&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are missing &lt;code&gt;add-apt-repository&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common python-software-properties&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-07-07T05:52:26.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15890" PostTypeId="2" ParentId="9513" CreationDate="2018-07-07T14:06:15.587" Score="0" Body="&lt;p&gt;Step 4 of this doc at &lt;a href=&quot;https://help.ubuntu.com/community/SoundTroubleshootingProcedure&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/SoundTroubleshootingProcedure&lt;/a&gt;&#xA;includes installation and starting pavucontrol and helped me restore sound on a Dell Lattitude laptop.  I had system sounds like trash and test front left/ front right but Noise Music player and videos on the browser did not have audio.&lt;/p&gt;&#xA;" OwnerUserId="8257" LastActivityDate="2018-07-07T14:06:15.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15891" PostTypeId="2" ParentId="15616" CreationDate="2018-07-07T15:50:24.317" Score="1" Body="&lt;p&gt;On my laptop (Dell Latitude E7740) there is a switch on the side that disables wifi and bluetooth. In the bios I can change which devices this switch disables or enables. Just below my screen there is an indicator (antenna symbol) that shows the status of this switch. Most laptops I have used had a similar switch and indicator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Switching off Wifi and bluetooth is a crude but effective way to avoid data-leaks. It is wise to have a plan B. For instance, encrypting the data on you laptop would render the information useless to a malevolent receiver. Or always using a VPN connection to lower your chances of getting hacked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is plenty of practical information on the net about securing a laptop.&lt;/p&gt;&#xA;" OwnerUserId="15024" LastActivityDate="2018-07-07T15:50:24.317" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15892" PostTypeId="1" CreationDate="2018-07-08T08:38:26.287" Score="0" ViewCount="78" Body="&lt;p&gt;Can I make a fork of the qbittorrent client with a gtk+ 3 frontend and call it deluge in the app store if I provide the attribution and links to the official developers?&lt;/p&gt;&#xA;" OwnerDisplayName="user13817" LastActivityDate="2020-05-19T23:04:20.507" Title="Forking an app and adding a GTK+ 3 frontend in the app store" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15893" PostTypeId="1" CreationDate="2018-07-08T14:32:33.297" Score="0" ViewCount="184" Body="&lt;p&gt;I know nothing about Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I'm really impressed with Elementary. However, as I went to the AppCenter to my surprise I did not find anything useful there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;No vs code, no node js, no skype, no git kraken, no good games (there are many good games for Linux I know from GOG)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The worst thing was: I had to install Eddy and Synaptic Packet Manager manually. After finding out that DEB is a package system and not like a ZIP file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In other words I was googling for 3 hours before I got it to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why is this? why doesn't the appcenter show as many good apps as there are in the world. and leave out the eehhm less useful things.&lt;/p&gt;&#xA;" OwnerUserId="15106" LastActivityDate="2019-04-25T09:00:16.653" Title="AppCenter from a laymans perspective" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15894" PostTypeId="1" CreationDate="2018-07-08T18:59:55.457" Score="0" ViewCount="945" Body="&lt;p&gt;is it possible (and how?) to install AppCenter Apps (like Quilter or Agenda) via command line? sudo apt install doesn't work for me...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Carlos&lt;/p&gt;&#xA;" OwnerUserId="15107" LastActivityDate="2018-09-07T13:00:31.263" Title="Install app from App Center in terminal" Tags="|pantheon-terminal|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15895" PostTypeId="1" CreationDate="2018-07-08T22:45:23.273" Score="0" ViewCount="131" Body="&lt;p&gt;I've donated few $'s and downloaded the &quot;Elementary OS&quot; ISO to install it in my new &quot;System76 - Oryx Pro&quot;.&#xA;I've tried many different ways and could not succeed. Error i am getting is attached here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Filesystem details are like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;500 GB SSD&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/           -   450 GB  |&#xA;SWAP        -    30 GB  |&#xA;/boot       -    10 GB  |&#xA;EFI System partition    -    10.1 GB  |&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;a href=&quot;https://i.stack.imgur.com/dnz4X.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dnz4X.jpg&quot; alt=&quot;Error Sequence - 1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5pDpt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5pDpt.jpg&quot; alt=&quot;Error Sequence - 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7678" LastActivityDate="2023-12-11T02:07:55.970" Title="I have installation issue while trying to do it on &quot;System76 - Oryx Pro&quot;?" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15896" PostTypeId="2" ParentId="15893" CreationDate="2018-07-09T01:28:45.387" Score="1" Body="&lt;p&gt;I think that the elementaryOS appcenter is pretty much like most appcenters on Linux distros are. They use repositories and depending on what repository is available different things will be found in the appcenter. What you see in the appcenter now is what you would most likely see in any distros appcenter until you add another repository. I do not know if GOG have a repository of their own which can be added in Linux. Perhaps if you would find a Linux distro that is more focused on gaming you would find better games &lt;em&gt;out of the box&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take a look at &lt;a href=&quot;https://distrowatch.com/search.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://distrowatch.com/search.php&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In most distros that I have tried Synaptic Package Manager is not installed by default. It is almost always something you will have to install afterwards. I suppose that every distro comes with its own package manager (or appcenter) and if that manager wouldn't suite your needs then Synaptic is available as an alternative.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A lot of the charm with Linux is that you can shape it after your needs and I would dare guess that very few users leave a distro untouched. This is why we love our distros - The freedom to tweak, change, add and remove things after our needs and wants.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my experience anyway :-D&lt;/p&gt;&#xA;" OwnerUserId="15087" LastActivityDate="2018-07-09T01:28:45.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15897" PostTypeId="2" ParentId="15894" CreationDate="2018-07-09T01:39:42.450" Score="3" Body="&lt;p&gt;&lt;code&gt;sudo apt install name-of-package&lt;/code&gt; is the right way to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One way to go about this is to double-check that you are giving the right package name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can look for the desired package/app with: &lt;code&gt;apt search name-of-package&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work for you then reply with the error that you are getting in terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="15087" LastActivityDate="2018-07-09T01:39:42.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15898" PostTypeId="2" ParentId="15895" CreationDate="2018-07-09T01:50:46.273" Score="0" Body="&lt;p&gt;Can you access your computer harddrive from the liveCD?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes, for reasons nobody understands, some bootable USB drives work and some just won't. Though usually when they won't work they won't even boot up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would make a new bootable USB, like a different USB-drive, and give it another go. If that wouldn't work then try to download elementaryOS again - maybe something got corrupted on the way down. I mean System76... that should be like a walk in the park for any distro.&lt;/p&gt;&#xA;" OwnerUserId="15087" LastActivityDate="2018-07-09T01:50:46.273" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="15899" PostTypeId="1" CreationDate="2018-07-09T02:10:29.160" Score="1" ViewCount="68" Body="&lt;p&gt;Good evening ... I like your distribution and I use it all the time, I want to donate but I do not have credit or debit cards. Is there another way to donate? ... excuse me, I am using a translator. Thank you&lt;/p&gt;&#xA;" OwnerUserId="15109" LastActivityDate="2018-09-07T09:50:54.280" Title="How can I donate?" Tags="|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15901" PostTypeId="2" ParentId="15899" CreationDate="2018-07-09T08:29:02.933" Score="2" Body="&lt;p&gt;I donate to Elementary via Patreon: &lt;a href=&quot;https://www.patreon.com/elementary/overview&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.patreon.com/elementary/overview&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Patreon takes PayPal as well as other payment methods.&lt;/p&gt;&#xA;" OwnerUserId="2753" LastActivityDate="2018-07-09T08:29:02.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15905" PostTypeId="1" CreationDate="2018-07-10T08:20:29.203" Score="5" ViewCount="5791" Body="&lt;p&gt;Dropbox icon is missing in Juno, and the Loki workarounds (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7550/dropbox-icon-missing-in-loki&quot;&gt;Dropbox icon missing in Loki&lt;/a&gt;) doesn't work anymore. &lt;/p&gt;&#xA;" OwnerUserId="15113" LastEditorUserId="9" LastEditDate="2018-10-23T12:22:32.413" LastActivityDate="2019-05-04T16:36:20.567" Title="Dropbox icon missing in Juno" Tags="|wingpanel|release-juno|dropbox|" AnswerCount="3" CommentCount="5" ClosedDate="2019-05-05T05:21:05.653" ContentLicense="CC BY-SA 4.0" />
  <row Id="15907" PostTypeId="1" AcceptedAnswerId="15909" CreationDate="2018-07-10T12:57:10.463" Score="1" ViewCount="305" Body="&lt;p&gt;Okay, so I've browsed answers to this question but found none to be satisfying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The question is: how can I make eOS behave like literally every other OS I know and keep the settings for wireless either on or off after reboot or wake up fro sleep. I tried different solutions offered here but none was really satisfying. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all, I'd like to say that I have an issue where I get headaches from Wi-Fi and Bluetooth. It's rare and it's real. Forcing me to handle the setting each time I open my laptop really is a chore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There has to be some solution to get eOS to behave like every other OS and just stick to whatever settings were chosen. Some people may want to choose to have Bluetooth and Wi-Fi turned off for various other reasons: security, power consumption, etc. Why force a setting to be always on anyway?&lt;/p&gt;&#xA;" OwnerUserId="15056" LastActivityDate="2018-07-10T14:39:45.363" Title="Turn off Bluetooth by default" Tags="|wifi|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15908" PostTypeId="2" ParentId="2593" CreationDate="2018-07-10T14:14:09.270" Score="0" Body="&lt;p&gt;Late to the party but go to Applications -&gt; Sound -&gt; Sound Effects and Mute it.&lt;/p&gt;&#xA;" OwnerUserId="15122" LastActivityDate="2018-07-10T14:14:09.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15909" PostTypeId="2" ParentId="15907" CreationDate="2018-07-10T14:39:45.363" Score="0" Body="&lt;p&gt;have you tried this ?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;check which block is the one for bluetooth&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill list&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;run this command on the bluetooth block (replace x by your value).&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill block x &#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="15111" LastActivityDate="2018-07-10T14:39:45.363" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="15911" PostTypeId="2" ParentId="2295" CreationDate="2018-07-10T16:50:11.287" Score="0" Body="&lt;p&gt;It doesn't make much sense but removing wingpanel-indicator-power resolved hangups problem for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system was not completely freezing like you reported. But I was having quick hangups for example when opening a new tab in chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get remove wingpanel-indicator-power&lt;/p&gt;&#xA;" OwnerUserId="14185" LastActivityDate="2018-07-10T16:50:11.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15912" PostTypeId="1" CreationDate="2018-07-11T00:14:44.990" Score="1" ViewCount="372" Body="&lt;p&gt;On MBP 6,1 2010 Juno beta boots normally at first but then times out on a black screen for over 3min, 5min originally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried &lt;a href=&quot;https://elementaryforums.com/index.php?threads/really-slow-boot-time.2222/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; and it has significantly reduced the boot time, together with editing grub as follows :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;vi /etc/default/grub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;changing:&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;to:&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;video=SVIDEO-1:d&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, compared to Loki that boots immediately, 3min boot time is too much. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2019-04-16T01:02:50.803" Title="Juno beta starting up really slow, times out on black screen &gt;3min" Tags="|display|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-16T01:19:09.720" ContentLicense="CC BY-SA 4.0" />
  <row Id="15913" PostTypeId="1" AcceptedAnswerId="17077" CreationDate="2018-07-11T05:57:25.407" Score="1" ViewCount="825" Body="&lt;p&gt;After installing Juno, even after trying it from the live CD with the wifi up and running successfully, at the first startup of Juno, wifi is not installed on MBP 6,1&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2018-11-15T10:38:31.210" LastActivityDate="2018-11-30T20:25:37.140" Title="Juno 5.0 beta first startup after install no wifi MPB 6,1" Tags="|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15915" PostTypeId="1" AcceptedAnswerId="15921" CreationDate="2018-07-11T12:01:50.107" Score="1" ViewCount="5240" Body="&lt;p&gt;Old ways of installing Nautilus do not work.&lt;/p&gt;&#xA;" OwnerUserId="15127" LastEditorUserId="15904" LastEditDate="2018-12-06T06:41:43.847" LastActivityDate="2020-01-24T12:55:50.950" Title="How do I enable desktop icons on elementaryOS 5.0 Juno?" Tags="|release-juno|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15917" PostTypeId="1" CreationDate="2018-07-11T20:17:15.877" Score="0" ViewCount="121" Body="&lt;p&gt;While typing there are times where my keyboard randomly freezes and repeats the key over and over again. At that point, my only option is to manually hit the power button in order to restart. The shutdown button at the top right does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="15130" LastActivityDate="2019-04-19T21:48:32.190" Title="Keyboard randomly freezes while typing" Tags="|system-installation|display|settings|keyboard|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15918" PostTypeId="2" ParentId="15913" CreationDate="2018-07-11T21:32:54.973" Score="0" Body="&lt;p&gt;I had that too with my MBPr 11,5.  You have to run - sudo modprobe brcmfmac to load wireless.  Run it from the terminal app.  Keep in mind that that is my wireless module to load.  Yours might be different.&lt;/p&gt;&#xA;" OwnerUserId="15131" LastActivityDate="2018-07-11T21:32:54.973" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="15920" PostTypeId="1" CreationDate="2018-07-12T05:30:10.903" Score="0" ViewCount="726" Body="&lt;p&gt;If I want to install Elementary OS now and upgrade to 5.0 when it is released, should I install Elementary OS 0.4.1 or 5.0 beta? Can either/both upgrade to 5.0?&lt;/p&gt;&#xA;" OwnerUserId="5683" LastActivityDate="2018-11-29T09:02:15.390" Title="What are the upgrade paths to Elementary OS 5.0?" Tags="|release-loki|updates|release-juno|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="15921" PostTypeId="2" ParentId="15915" CreationDate="2018-07-12T10:21:06.750" Score="3" Body="&lt;p&gt;Install &lt;a href=&quot;https://appcenter.elementary.io/com.github.spheras.desktopfolder/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Desktop Folder&lt;/a&gt; from App Center&lt;/p&gt;&#xA;" OwnerUserId="10558" LastEditorUserId="19056" LastEditDate="2020-01-24T12:55:50.950" LastActivityDate="2020-01-24T12:55:50.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15923" PostTypeId="1" CreationDate="2018-07-12T14:10:17.147" Score="0" ViewCount="134" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8FuTG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8FuTG.png&quot; alt=&quot;Double child window in applications&quot;&gt;&lt;/a&gt;&#xA;It's happening in various applications, not only with mysql workbench, I tried to open a bug report, but I don't know where the elementary os bug report is hosted.&lt;/p&gt;&#xA;" OwnerUserId="15136" LastActivityDate="2024-03-27T22:06:00.813" Title="Why am I having double child window in applications?" Tags="|pantheon|gala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15927" PostTypeId="2" ParentId="5407" CreationDate="2018-07-13T14:04:32.110" Score="0" Body="&lt;p&gt;Maybe you should try this working for me:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;First go Network -&gt; Options -&gt; IPv4&lt;/li&gt;&#xA;&lt;li&gt;Second add dns I am using this dns: &lt;a href=&quot;https://1.1.1.1/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://1.1.1.1/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;My dns address: (1.1.1.1, 1.0.0.1)&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-07-13T14:04:32.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15936" PostTypeId="1" AcceptedAnswerId="15944" CreationDate="2018-07-14T09:13:28.727" Score="0" ViewCount="290" Body="&lt;p&gt;I'm using this code to apply some dynamic css to button based on colours chosen by the user. This was working in Loki but not working in Juno Beta. Thanks in advance for any pointers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.Create a CSS String (dynamically) with custom colors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dynamicCSSContent  = &quot;GtkButton.PROFILE_BUTTON_1 { color: #000000; background-color: #fbfbfb; border-color: #B0C4DE; } GtkButton.PROFILE_BUTTON_2 { color: #586e75; background-color: #fdf6e3; border-color: #B0C4DE; } GtkButton.PROFILE_BUTTON_3 { color: #93a1a1; background-color: #002b36; border-color: #B0C4DE; }&quot;;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Set the css and load the same. Actual code &lt;a href=&quot;https://github.com/babluboy/bookworm/blob/7bc690bd8fb2e972007e8e2b65cbe7772dbbfbfc/src/bookworm.vala#L347&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cssProvider = new Gtk.CssProvider();&#xA;cssProvider.load_from_data(dynamicCSSContent, dynamicCSSContent.length);&#xA;Gtk.StyleContext.add_provider_for_screen(&#xA;            Gdk.Screen.get_default(),&#xA;            cssProvider,&#xA;            Gtk.STYLE_PROVIDER_PRIORITY_APPLICATION&#xA;        );&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Apply the CSS to the buttons. Actual code &lt;a href=&quot;https://github.com/babluboy/bookworm/blob/7bc690bd8fb2e972007e8e2b65cbe7772dbbfbfc/src/prefpopover.vala#L67&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;profileButton1.get_style_context().add_class (&quot;PROFILE_BUTTON_1&quot;);&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="613" LastActivityDate="2018-07-15T10:13:51.417" Title="Button CSS not working in Juno" Tags="|gtk|vala|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15938" PostTypeId="2" ParentId="15923" CreationDate="2018-07-14T10:35:25.337" Score="0" Body="&lt;p&gt;Which elementaryOS version are you using? Seems like an issue with Pantheon, therefore you might try to reinstall pantheon-desktop without having to wipe your hdd/ssd.&lt;/p&gt;&#xA;" OwnerUserId="14636" LastActivityDate="2018-07-14T10:35:25.337" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="15939" PostTypeId="1" CreationDate="2018-07-14T21:16:42.840" Score="0" ViewCount="310" Body="&lt;p&gt;Trying to choose a Linux Distro, would like to use Elementary OS with Pantheon desktop.  Can I run Android Studio in this environment?&lt;/p&gt;&#xA;" OwnerUserId="15150" LastActivityDate="2018-10-13T04:00:28.013" Title="Android Studio with Pantheon" Tags="|pantheon|android-studio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15941" PostTypeId="2" ParentId="15939" CreationDate="2018-07-15T00:56:29.590" Score="1" Body="&lt;p&gt;yes you can&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i recommend you to install it (and update it later when needed) through snapd&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/android-studio&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/android-studio&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then follow the website instructions&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install android-studio --channel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to update later&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap refresh android-studio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-07-15T00:56:29.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15942" PostTypeId="2" ParentId="12008" CreationDate="2018-07-15T01:10:33.020" Score="1" Body="&lt;p&gt;please can you give us more and better details:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;provide the link of the tutorial you followed (the link is a downsized image - thumbnail)&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;open a terminal and write the following command and then show us what it says&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt update &amp;amp; sudo apt upgrade&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;again, open a terminal and write the following command and then show us what it says&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /etc/apt/sources.list.d/spotify.list&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;it looks like you have a failed gimp installation and that image isn't showing us all what's happening&#xA;sometimes a previous faulty installation does not allow another one until it's fixed, but the image showed us that you have the command sudo in a sources.list file, that's wrong and you should fix that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can install the latest spotify using snapd&#xA;&lt;a href=&quot;https://snapcraft.io/spotify&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/spotify&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;EDIT: The result of the cat command is two lines of text, and both say &quot;sudo apt-get update&quot;. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Use this command, you did something wrong following the tutorial and the file is wrong&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -fr /etc/apt/sources.list.d/spotify.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to install spotify, use snap&#xA;&lt;a href=&quot;https://snapcraft.io/spotify&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/spotify&lt;/a&gt;&#xA;If you don't have it (snapd) follow the link&#xA;&lt;a href=&quot;https://docs.snapcraft.io/core/install-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.snapcraft.io/core/install-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-07-15T01:25:04.990" LastActivityDate="2018-07-15T01:25:04.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15944" PostTypeId="2" ParentId="15936" CreationDate="2018-07-15T10:13:51.417" Score="0" Body="&lt;p&gt;Thanks to @DanielForé for pointing me at the CSS change in GTK 3.22 which is the root cause of the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Selectors for Gtk widgets have changed in GTK 3.22. Instead of “GtkButton”, the selector is now “button”.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So instead of the following CSS (works in Loki):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GtkButton.PROFILE_BUTTON_1 { color: #000000; background-color: #fbfbfb; border-color: #B0C4DE; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The correct CSS for Juno (which uses GTK 3.22):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;button.PROFILE_BUTTON_1 { color: #000000; background-color: #fbfbfb; border-color: #B0C4DE; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reference for all widget's selector names are listed here: &lt;a href=&quot;https://developer.gnome.org/gtk3/stable/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.gnome.org/gtk3/stable/index.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2018-07-15T10:13:51.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15949" PostTypeId="1" CreationDate="2018-07-16T15:56:22.663" Score="1" ViewCount="197" Body="&lt;p&gt;How to use wingpanel as menu for applications like mac os x&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9wFRJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9wFRJ.png&quot; alt=&quot;like this picture&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15159" LastActivityDate="2018-07-16T15:56:22.663" Title="How to use wingpanel as menu for applications like mac os x" Tags="|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15951" PostTypeId="1" CreationDate="2018-07-17T13:38:51.717" Score="0" ViewCount="740" Body="&lt;p&gt;I'm new one on elementary, I work behind a proxy.  I cant get work apt -get behind a proxy  , i tried to edit  &lt;strong&gt;/etc/apt/apt.conf&lt;/strong&gt; but i can't find, thanks for your help&lt;/p&gt;&#xA;" OwnerUserId="15163" LastActivityDate="2018-11-14T17:01:15.220" Title="How configure apt-get with proxy" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15952" PostTypeId="2" ParentId="15951" CreationDate="2018-07-17T14:28:40.527" Score="1" Body="&lt;p&gt;finally i created a file apt.conf in /etc/apt/ , and i filled with &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Acquire::http::proxy &quot;http://:&quot;; &#xA;Acquire::https::proxy &quot;http://:&quot;; &#xA;Acquire::ftp::proxy &quot;http://:&quot;;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;rebooted and it worked&lt;/p&gt;&#xA;" OwnerUserId="15163" LastActivityDate="2018-07-17T14:28:40.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15954" PostTypeId="1" CreationDate="2018-07-18T14:34:22.057" Score="1" ViewCount="39" Body="&lt;p&gt;Skype is again muted after the update of the sound mixer package (I think switchboard-plug-locale), mic is muted for an unknown reason, MBP 6,1. Before it was working fine, and even better than under MacOS in Juno (while it is muted in Loki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2018-07-20T07:20:48.200" LastActivityDate="2018-07-20T07:20:48.200" Title="Juno 5.0 beta Skype mic muted again after sound mixer system update" Tags="|sound|skype|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="15958" PostTypeId="1" CreationDate="2018-07-19T07:45:07.310" Score="0" ViewCount="240" Body="&lt;p&gt;Short version: I can't upgrade my packages (I'm using Elementary OS 0.4.1, based on Ubuntu - that's why I'm asking here).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long version:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;First step&lt;/strong&gt;&lt;br&gt;&#xA;I try fetching package informations via &lt;code&gt;sudo apt-get update&lt;/code&gt;. Besides the fact that I get a really long list in the output (snippet below) it seems that it works properly.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://archive.ubuntu.com/ubuntu xenial InRelease&#xA;Hit:2 http://repository.spotify.com stable InRelease&#xA;Get:3 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]&#xA;Hit:4 http://ppa.launchpad.net/cybre/elementaryplus/ubuntu xenial InRelease&#xA;Get:5 http://archive.ubuntu.com/ubuntu xenial-security InRelease [107 kB]&#xA;Hit:6 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial InRelease&#xA;Ign:7 http://archive.ubuntu.com/ubuntu loki InRelease&#xA;Ign:8 http://archive.ubuntu.com/ubuntu loki Release&#xA;Ign:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;Hit:10 http://ppa.launchpad.net/js-reynaud/kicad-4/ubuntu xenial InRelease&#xA;Hit:11 http://archive.canonical.com/ubuntu xenial InRelease&#xA;Hit:12 https://repo.skype.com/deb stable InRelease&#xA;Hit:13 http://packages.elementary.io/appcenter xenial InRelease&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Hit:16 http://ppa.launchpad.net/mmk2410/intellij-idea/ubuntu xenial InRelease&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:19 http://archive.canonical.com/ubuntu loki InRelease&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Hit:21 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial InRelease&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Hit:24 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu xenial InRelease&#xA;Ign:25 http://archive.canonical.com/ubuntu loki Release&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Hit:29 http://ppa.launchpad.net/simonschneegans/testing/ubuntu xenial InRelease&#xA;Ign:30 http://archive.ubuntu.com/ubuntu loki/universe Translation-en_US&#xA;Ign:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;Ign:32 http://archive.ubuntu.com/ubuntu loki/universe Translation-en&#xA;Ign:33 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial InRelease&#xA;Ign:34 http://archive.ubuntu.com/ubuntu loki/universe Translation-de&#xA;Ign:35 http://archive.ubuntu.com/ubuntu loki/universe amd64 DEP-11 Metadata&#xA;Ign:36 http://archive.ubuntu.com/ubuntu loki/universe DEP-11 64x64 Icons&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:38 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release&#xA;Hit:39 https://download.sublimetext.com apt/stable/ InRelease&#xA;Ign:40 http://archive.ubuntu.com/ubuntu loki/restricted amd64 Packages&#xA;Ign:41 http://archive.ubuntu.com/ubuntu loki/restricted i386 Packages&#xA;Ign:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;Ign:43 http://archive.ubuntu.com/ubuntu loki/restricted all Packages&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:46 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en_US&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:48 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:50 http://archive.ubuntu.com/ubuntu loki/restricted Translation-de&#xA;Ign:51 http://archive.ubuntu.com/ubuntu loki/restricted amd64 DEP-11 Metadata&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:53 http://archive.ubuntu.com/ubuntu loki/restricted DEP-11 64x64 Icons&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:55 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 Packages&#xA;Ign:56 http://archive.ubuntu.com/ubuntu loki/multiverse i386 Packages&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:58 http://archive.ubuntu.com/ubuntu loki/multiverse all Packages&#xA;Ign:59 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en_US&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Ign:61 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:63 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-de&#xA;Ign:64 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 DEP-11 Metadata&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:67 http://archive.ubuntu.com/ubuntu loki/multiverse DEP-11 64x64 Icons&#xA;Ign:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Ign:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Ign:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Ign:30 http://archive.ubuntu.com/ubuntu loki/universe Translation-en_US&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:32 http://archive.ubuntu.com/ubuntu loki/universe Translation-en&#xA;Ign:34 http://archive.ubuntu.com/ubuntu loki/universe Translation-de&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Ign:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;Ign:35 http://archive.ubuntu.com/ubuntu loki/universe amd64 DEP-11 Metadata&#xA;Ign:36 http://archive.ubuntu.com/ubuntu loki/universe DEP-11 64x64 Icons&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:40 http://archive.ubuntu.com/ubuntu loki/restricted amd64 Packages&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:41 http://archive.ubuntu.com/ubuntu loki/restricted i386 Packages&#xA;Ign:43 http://archive.ubuntu.com/ubuntu loki/restricted all Packages&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:46 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en_US&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:48 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:50 http://archive.ubuntu.com/ubuntu loki/restricted Translation-de&#xA;Ign:51 http://archive.ubuntu.com/ubuntu loki/restricted amd64 DEP-11 Metadata&#xA;Ign:53 http://archive.ubuntu.com/ubuntu loki/restricted DEP-11 64x64 Icons&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;Ign:55 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 Packages&#xA;Ign:56 http://archive.ubuntu.com/ubuntu loki/multiverse i386 Packages&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:58 http://archive.ubuntu.com/ubuntu loki/multiverse all Packages&#xA;Ign:59 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en_US&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:61 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:63 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-de&#xA;Ign:64 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 DEP-11 Metadata&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:67 http://archive.ubuntu.com/ubuntu loki/multiverse DEP-11 64x64 Icons&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Ign:30 http://archive.ubuntu.com/ubuntu loki/universe Translation-en_US&#xA;Ign:32 http://archive.ubuntu.com/ubuntu loki/universe Translation-en&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:34 http://archive.ubuntu.com/ubuntu loki/universe Translation-de&#xA;Ign:35 http://archive.ubuntu.com/ubuntu loki/universe amd64 DEP-11 Metadata&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:36 http://archive.ubuntu.com/ubuntu loki/universe DEP-11 64x64 Icons&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:40 http://archive.ubuntu.com/ubuntu loki/restricted amd64 Packages&#xA;Ign:41 http://archive.ubuntu.com/ubuntu loki/restricted i386 Packages&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:43 http://archive.ubuntu.com/ubuntu loki/restricted all Packages&#xA;Ign:46 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en_US&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;Ign:48 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en&#xA;Ign:50 http://archive.ubuntu.com/ubuntu loki/restricted Translation-de&#xA;Ign:51 http://archive.ubuntu.com/ubuntu loki/restricted amd64 DEP-11 Metadata&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:53 http://archive.ubuntu.com/ubuntu loki/restricted DEP-11 64x64 Icons&#xA;Ign:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;Ign:55 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 Packages&#xA;Ign:56 http://archive.ubuntu.com/ubuntu loki/multiverse i386 Packages&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:58 http://archive.ubuntu.com/ubuntu loki/multiverse all Packages&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:59 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en_US&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:61 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en&#xA;Ign:63 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-de&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:64 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 DEP-11 Metadata&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:67 http://archive.ubuntu.com/ubuntu loki/multiverse DEP-11 64x64 Icons&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Err:42 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 Packages&#xA;  404  Not Found&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:45 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main i386 Packages&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:49 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main all Packages&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Ign:30 http://archive.ubuntu.com/ubuntu loki/universe Translation-en_US&#xA;Ign:52 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en_US&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:32 http://archive.ubuntu.com/ubuntu loki/universe Translation-en&#xA;Ign:34 http://archive.ubuntu.com/ubuntu loki/universe Translation-de&#xA;Ign:35 http://archive.ubuntu.com/ubuntu loki/universe amd64 DEP-11 Metadata&#xA;Ign:57 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-en&#xA;Ign:36 http://archive.ubuntu.com/ubuntu loki/universe DEP-11 64x64 Icons&#xA;Ign:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;Ign:40 http://archive.ubuntu.com/ubuntu loki/restricted amd64 Packages&#xA;Ign:62 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main Translation-de&#xA;Ign:41 http://archive.ubuntu.com/ubuntu loki/restricted i386 Packages&#xA;Ign:43 http://archive.ubuntu.com/ubuntu loki/restricted all Packages&#xA;Ign:46 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en_US&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:66 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main amd64 DEP-11 Metadata&#xA;Ign:48 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en&#xA;Ign:50 http://archive.ubuntu.com/ubuntu loki/restricted Translation-de&#xA;Ign:68 http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial/main DEP-11 64x64 Icons&#xA;Ign:51 http://archive.ubuntu.com/ubuntu loki/restricted amd64 DEP-11 Metadata&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:53 http://archive.ubuntu.com/ubuntu loki/restricted DEP-11 64x64 Icons&#xA;Ign:55 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 Packages&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:56 http://archive.ubuntu.com/ubuntu loki/multiverse i386 Packages&#xA;Ign:58 http://archive.ubuntu.com/ubuntu loki/multiverse all Packages&#xA;Ign:59 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en_US&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:61 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en&#xA;Ign:63 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-de&#xA;Ign:64 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 DEP-11 Metadata&#xA;Ign:67 http://archive.ubuntu.com/ubuntu loki/multiverse DEP-11 64x64 Icons&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Ign:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Err:31 http://archive.canonical.com/ubuntu loki/partner amd64 Packages&#xA;  404  Not Found [IP: 2001:67c:1562::1c 80]&#xA;Ign:30 http://archive.ubuntu.com/ubuntu loki/universe Translation-en_US&#xA;Ign:32 http://archive.ubuntu.com/ubuntu loki/universe Translation-en&#xA;Ign:34 http://archive.ubuntu.com/ubuntu loki/universe Translation-de&#xA;Ign:37 http://archive.canonical.com/ubuntu loki/partner i386 Packages&#xA;Ign:35 http://archive.ubuntu.com/ubuntu loki/universe amd64 DEP-11 Metadata&#xA;Ign:36 http://archive.ubuntu.com/ubuntu loki/universe DEP-11 64x64 Icons&#xA;Ign:40 http://archive.ubuntu.com/ubuntu loki/restricted amd64 Packages&#xA;Ign:41 http://archive.ubuntu.com/ubuntu loki/restricted i386 Packages&#xA;Ign:44 http://archive.canonical.com/ubuntu loki/partner all Packages&#xA;Ign:43 http://archive.ubuntu.com/ubuntu loki/restricted all Packages&#xA;Ign:47 http://archive.canonical.com/ubuntu loki/partner Translation-en_US&#xA;Ign:46 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en_US&#xA;Ign:48 http://archive.ubuntu.com/ubuntu loki/restricted Translation-en&#xA;Ign:50 http://archive.ubuntu.com/ubuntu loki/restricted Translation-de&#xA;Ign:51 http://archive.ubuntu.com/ubuntu loki/restricted amd64 DEP-11 Metadata&#xA;Ign:54 http://archive.canonical.com/ubuntu loki/partner Translation-en&#xA;Ign:53 http://archive.ubuntu.com/ubuntu loki/restricted DEP-11 64x64 Icons&#xA;Ign:55 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 Packages&#xA;Ign:56 http://archive.ubuntu.com/ubuntu loki/multiverse i386 Packages&#xA;Ign:58 http://archive.ubuntu.com/ubuntu loki/multiverse all Packages&#xA;Ign:59 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en_US&#xA;Ign:61 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-en&#xA;Ign:63 http://archive.ubuntu.com/ubuntu loki/multiverse Translation-de&#xA;Ign:64 http://archive.ubuntu.com/ubuntu loki/multiverse amd64 DEP-11 Metadata&#xA;Ign:67 http://archive.ubuntu.com/ubuntu loki/multiverse DEP-11 64x64 Icons&#xA;Ign:60 http://archive.canonical.com/ubuntu loki/partner Translation-de&#xA;Err:9 http://archive.ubuntu.com/ubuntu loki/main amd64 Packages&#xA;  404  Not Found [IP: 2001:67c:1360:8001::21 80]&#xA;Ign:14 http://archive.ubuntu.com/ubuntu loki/main i386 Packages&#xA;Ign:15 http://archive.ubuntu.com/ubuntu loki/main all Packages&#xA;Ign:65 http://archive.canonical.com/ubuntu loki/partner amd64 DEP-11 Metadata&#xA;Ign:17 http://archive.ubuntu.com/ubuntu loki/main Translation-en_US&#xA;Ign:18 http://archive.ubuntu.com/ubuntu loki/main Translation-en&#xA;Ign:20 http://archive.ubuntu.com/ubuntu loki/main Translation-de&#xA;Ign:22 http://archive.ubuntu.com/ubuntu loki/main amd64 DEP-11 Metadata&#xA;Ign:69 http://archive.canonical.com/ubuntu loki/partner DEP-11 64x64 Icons&#xA;Ign:23 http://archive.ubuntu.com/ubuntu loki/main DEP-11 64x64 Icons&#xA;Ign:26 http://archive.ubuntu.com/ubuntu loki/universe amd64 Packages&#xA;Ign:27 http://archive.ubuntu.com/ubuntu loki/universe i386 Packages&#xA;Ign:28 http://archive.ubuntu.com/ubuntu loki/universe all Packages&#xA;Fetched 216 kB in 5s (36,5 kB/s)&#xA;Reading package lists...&#xA;W: The repository 'http://archive.canonical.com/ubuntu loki Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: The repository 'http://archive.ubuntu.com/ubuntu loki Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release' does not have a Release file.&#xA;N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: Failed to fetch http://archive.canonical.com/ubuntu/dists/loki/partner/binary-amd64/Packages  404  Not Found [IP: 2001:67c:1360:8c01::16 80]&#xA;E: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/loki/main/binary-amd64/Packages  404  Not Found [IP: 2001:67c:1360:8001::21 80]&#xA;E: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Second Step&lt;/strong&gt;&lt;br&gt;&#xA;As I said above, I thought this might be okay because I have been able to upgrade my packages before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The next thing I try is doing a &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;. But when I do this it fails with a bunch of errors:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error I get the most is &lt;code&gt;insserv: Starting smfpd depends on plymouth and therefore on system facility '$all' which can not be true!&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full Error output:&lt;br&gt;&#xA;&lt;a href=&quot;https://pastebin.com/u4AjSzrK&quot; rel=&quot;nofollow noreferrer&quot;&gt;Output of sudo apt-get upgrade&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;So here's my final question&lt;/strong&gt;&lt;br&gt;&#xA;What can I do to make these errors disappear?&lt;br&gt;&#xA;I have already tried to reconfigure these packages via &lt;code&gt;dpkg-reconfigure -a&lt;/code&gt; and also a &quot;normal&quot; configuration with &lt;code&gt;dpkg --configure -a&lt;/code&gt; - both failed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would be very thankful for every tip / idea.&lt;/p&gt;&#xA;" OwnerUserId="12804" LastActivityDate="2024-03-20T00:08:41.183" Title="Can't upgrade my packages" Tags="|updates|apt|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15959" PostTypeId="2" ParentId="15958" CreationDate="2018-07-19T08:26:12.370" Score="0" Body="&lt;p&gt;First off, most repositories don't have a explicit &lt;code&gt;loki&lt;/code&gt; distro, and the &lt;code&gt;apt update&lt;/code&gt; output confirms that: most of them are ignored or not found. I would first remove all of them using one of the ways described &lt;a href=&quot;https://unix.stackexchange.com/questions/60595/how-to-undo-sudo-add-apt-repository&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And as for Versable: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14660/the-repository-http-ppa-launchpad-net-versable-elementary-update-ubuntu-xenia&quot;&gt;The repository &amp;#39;http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release&amp;#39; does not have a Release file&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15156" LastActivityDate="2018-07-19T08:26:12.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15961" PostTypeId="2" ParentId="4754" CreationDate="2018-07-19T15:31:10.460" Score="0" Body="&lt;p&gt;this work for me,&lt;br&gt;&#xA;you have to install&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and select your card sound&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.gyt.is/2014/08/18/installing-surround-sound-card-on-linux-sandberg-usb-sound-box-7-1/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.gyt.is/2014/08/18/installing-surround-sound-card-on-linux-sandberg-usb-sound-box-7-1/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15180" LastEditorUserId="16827" LastEditDate="2019-10-22T03:22:24.017" LastActivityDate="2019-10-22T03:22:24.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15962" PostTypeId="2" ParentId="15912" CreationDate="2018-07-19T19:35:58.017" Score="1" Body="&lt;p&gt;The issue seems to have been solved automatically by the recent system updates. &lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2018-07-19T19:35:58.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15964" PostTypeId="2" ParentId="12174" CreationDate="2018-07-19T20:11:11.937" Score="0" Body="&lt;p&gt;AppEditor will be your friend. You can have it from AppCenter. Easy to use. After first start of the program you can keep your new app on your dock.&lt;/p&gt;&#xA;" OwnerUserId="7756" LastActivityDate="2018-07-19T20:11:11.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15974" PostTypeId="2" ParentId="2680" CreationDate="2018-07-21T23:10:53.283" Score="6" Body="&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will also work in other distros.&lt;/p&gt;&#xA;" OwnerUserId="15196" LastActivityDate="2018-07-21T23:10:53.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15976" PostTypeId="2" ParentId="11796" CreationDate="2018-07-22T10:45:50.310" Score="1" Body="&lt;p&gt;Open Vivaldi with –disable-gpu will also solve.Open terminal and in your terminal type the below code and hit the enter key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;vivaldi --diable-gpu&lt;/code&gt;&#xA;or try&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;vivaldi --disable-gpu-vsync&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From: &lt;a href=&quot;https://connectwww.com/how-to-solve-vivaldi-flickering-screen-in-ubuntu-or-any-other-linux/4925/&quot; rel=&quot;nofollow noreferrer&quot;&gt;connect.com&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15199" LastActivityDate="2018-07-22T10:45:50.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15979" PostTypeId="2" ParentId="8598" CreationDate="2018-07-23T05:58:35.510" Score="0" Body="&lt;p&gt;I am no longer using this laptop, however I feel comfortable saying that this was a hardware problem and not really an issue with elementary. Sleep got more reliable with updates but hibernation issues persisted and most of the errors were related to my hard drive. Once I started getting some unusual lag under &lt;em&gt;both&lt;/em&gt; operating systems, I planned on replacing the hard drive. But then I knocked my coffee over and it spilled all over my laptop and notes. I just replaced the whole thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A new computer seems to have solved this issue, although that might be extreme for most. This computer was set up in a similar way; SSD partitions between Windows 10 and elementary and for the last 3 months it's been great! Sleep works fine, and not a single filesystem error, boot failure... it just works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone else encounters this issue, check your hardware and back up your files! Don't pour coffee on your computer but be prepared in case anything fails!&lt;/p&gt;&#xA;" OwnerUserId="6835" LastActivityDate="2018-07-23T05:58:35.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15980" PostTypeId="2" ParentId="8743" CreationDate="2018-07-23T06:14:51.933" Score="0" Body="&lt;p&gt;Just connect your pc with terhering cable with mobile ( must internet connection) open app store then uinstall updated kernal version the restart your pc done.&lt;/p&gt;&#xA;" OwnerUserId="15207" LastActivityDate="2018-07-23T06:14:51.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15982" PostTypeId="2" ParentId="8743" CreationDate="2018-07-23T13:00:16.433" Score="1" Body="&lt;p&gt;You may not have the the necessary Wifi drivers. You need to:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Find the wifi adapter your pc/laptop is having.&lt;/li&gt;&#xA;&lt;li&gt;Find if its driver is available (just search with adapter_name + ubuntu + driver on google)&lt;/li&gt;&#xA;&lt;li&gt;You will likely get good tutorials to install the driver. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;We you can provide specifics, I can update the answer accordingly.&lt;/p&gt;&#xA;" OwnerUserId="9747" LastActivityDate="2018-07-23T13:00:16.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15985" PostTypeId="1" CreationDate="2018-07-23T19:47:47.887" Score="0" ViewCount="2690" Body="&lt;p&gt;How to install anaconda in elementary Os please explain step by step process &lt;/p&gt;&#xA;" OwnerUserId="15217" LastActivityDate="2021-08-13T15:00:35.050" Title="How to install anaconda in Eos? Explain please" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15990" PostTypeId="1" CreationDate="2018-07-24T09:54:25.727" Score="4" ViewCount="1984" Body="&lt;p&gt;I can't install &lt;code&gt;postman&lt;/code&gt; using the command line...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget https://dl.pstmn.io/download/latest/linux64 -O postman.tar.gz&#xA;sudo tar -xzf postman.tar.gz -C /opt&#xA;rm postman.tar.gz&#xA;sudo ln -s /opt/Postman/Postman /usr/bin/postman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15222" LastEditorUserId="14940" LastEditDate="2018-12-02T05:38:12.013" LastActivityDate="2019-01-01T08:02:40.533" Title="how to install postman in elementary os using terminal" Tags="|software-installation|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15992" PostTypeId="1" CreationDate="2018-07-24T17:44:52.480" Score="1" ViewCount="381" Body="&lt;p&gt;I'm using elementary OS 5.0 Juno &amp;amp; having this error. It slows down the laptop because there are tons of them:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;19:20:25 fishin kernel: i2c_hid i2c-DELL083F:00: i2c_hid_get_input: incomplete report (14/65535)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15224" LastEditorUserId="15425" LastEditDate="2018-09-02T18:54:18.553" LastActivityDate="2019-05-03T16:01:35.297" Title="Kernel Error- Producing Tons of them" Tags="|kernel|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-03T19:57:02.857" ContentLicense="CC BY-SA 4.0" />
  <row Id="15994" PostTypeId="1" AcceptedAnswerId="15995" CreationDate="2018-07-25T06:27:34.880" Score="1" ViewCount="69" Body="&lt;p&gt;I am a fan of video game music, and have some files in .vgm format. I place these files in my Music folder along with .mp3 files. While the mp3 files show up in the Noise library, the .vgm files don't. Is there currently any way I can add the .vgm files to the library?&lt;/p&gt;&#xA;" OwnerUserId="15156" LastActivityDate="2019-04-21T14:02:35.523" Title="Adding music types to Noise library" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15995" PostTypeId="2" ParentId="15994" CreationDate="2018-07-25T10:46:15.673" Score="1" Body="&lt;p&gt;Supported content types are defined in the source code found &lt;a href=&quot;https://bazaar.launchpad.net/~elementary-apps/noise/master/view/head:/core/Resources.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. In other words, the only way to add additional file types to the library is to download the source code, edit it then build it myself.&lt;/p&gt;&#xA;" OwnerUserId="15156" LastActivityDate="2018-07-25T10:46:15.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="15997" PostTypeId="1" CreationDate="2018-07-25T19:11:47.100" Score="0" ViewCount="29" Body="&lt;p&gt;I would like to move /usr to a different partition because I would like to not use that much space on my ssd in favor of my fairly empty hdd. I would also like to move another /snap since it eats up alot of space as well. I know I could just physically move it but would all the programs that use it automatically be updated to point towards the new directory? Will new applications still go to the moved /usr or would it create a new one on the SSD and use that again? On ver 5.0. &lt;/p&gt;&#xA;" OwnerUserId="15234" LastActivityDate="2018-09-25T14:02:02.287" Title="How would I go about moving /usr to a different partition" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16001" PostTypeId="1" CreationDate="2018-07-26T21:28:26.943" Score="2" ViewCount="129" Body="&lt;p&gt;Since few days, once logged in elementary OS 0.4.1 Loki, when I have to enter my password (for exemple to update), I can't do it because the authentification box is kind of &quot;shaking&quot; with a high frequency and there's two different error messages displayed &lt;a href=&quot;https://i.stack.imgur.com/zg2Na.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zg2Na.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;.&#xA;The two error messages displayed (translated from french) are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;incorrect permissions on /usr/lib/policykit-1/polkit-agent-helper-1 (needs to be setuid root)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;identification failed.Try again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I tried to make a manual update via the terminal but I can't fully complete it (see second screenshot)&lt;a href=&quot;https://i.stack.imgur.com/r6mkC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r6mkC.png&quot; alt=&quot;terminal screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.:)&lt;/p&gt;&#xA;" OwnerUserId="15243" LastEditorUserId="308" LastEditDate="2018-08-07T18:24:56.780" LastActivityDate="2018-12-14T16:02:05.983" Title="Impossible to enter my password in authentification box" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16003" PostTypeId="2" ParentId="15997" CreationDate="2018-07-27T10:37:47.540" Score="1" Body="&lt;p&gt;Moving the directory to a different partition won't work. The best solution would probably be to do this during the installation process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to create 3 separate partitions, 1 on the SSD with &lt;code&gt;/&lt;/code&gt; mountpoint and the other two on the hard drive with mount points &lt;code&gt;/usr&lt;/code&gt; and &lt;code&gt;/snap&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is also a good practise to have &lt;code&gt;/home&lt;/code&gt; directory on a separate partion, it helps a lot when reinstalling os or changing a linux distro. And it's also good to have a Swap partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wouldn't recommend doing this on a running system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more info on this you can see&#xA;&lt;a href=&quot;https://wiki.archlinux.org/index.php/partitioning#Partition_scheme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/partitioning#Partition_scheme&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15246" LastActivityDate="2018-07-27T10:37:47.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16004" PostTypeId="2" ParentId="15893" CreationDate="2018-07-27T11:09:03.080" Score="0" Body="&lt;p&gt;The appcenter is good for elementary specific apps, their number is now growing quite fast (you also can make one, see &lt;a href=&quot;https://developer.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.elementary.io/&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For other apps I would recommend to use flatpak or snap. It is a new way of installing apps on linux. There is an app called Snaptastic in the appcenter for installing snaps. For installing flatpak see &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/setup/elementary%20OS/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's just the way it works on Linux - when you have freedom, it may be a little more messy sometimes, but it's worth it :D&lt;/p&gt;&#xA;" OwnerUserId="15246" LastActivityDate="2018-07-27T11:09:03.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16005" PostTypeId="2" ParentId="15892" CreationDate="2018-07-27T12:04:06.210" Score="1" Body="&lt;p&gt;qbittorrent is licensed under GPLv2 so the licence should allow it (as long as you use the same licence). The problem is qbittorent is written in C++ and elementary apps are written in Vala. Plus there already is a quite good Torrent client called Torrential in the app center.&lt;/p&gt;&#xA;" OwnerUserId="15246" LastActivityDate="2018-07-27T12:04:06.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16006" PostTypeId="1" AcceptedAnswerId="16032" CreationDate="2018-07-27T18:04:36.023" Score="0" ViewCount="484" Body="&lt;p&gt;My wifi connectivity has recently stopped. I am using an HP Probook with elementary OS 0.4.1 Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the app manager to maintain my software state. As far as I can tell the device is still there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would seem I have a Broadcom card!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have read a few posts and have run the following the diagnostics.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dave@pcdflhp:~$ uname -a&#xA;Linux pcdflhp 4.15.0-29-generic #31~16.04.1-Ubuntu SMP Wed Jul 18 08:54:04 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux&#xA;&#xA;dave@pcdflhp:~$ iwconfig&#xA;lo        no wireless extensions.&#xA;ens5      no wireless extensions.&#xA;&#xA;dave@pcdflhp:~$ sudo nmcli radio&#xA;WIFI-HW  WIFI     WWAN-HW  WWAN    &#xA;enabled      enabled  enabled         enabled &#xA;&#xA;dave@pcdflhp:/var/lib/NetworkManager$ cat NetworkManager.state &#xA;[main]&#xA;NetworkingEnabled=true&#xA;WirelessEnabled=true&#xA;WWANEnabled=true&#xA;&#xA;dave@pcdflhp:~$ sudo lshw -class network&#xA;  *-network UNCLAIMED     &#xA;       description: Network controller&#xA;       product: BCM4313 802.11bgn Wireless Network Adapter&#xA;       vendor: Broadcom Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       version: 01&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list&#xA;       configuration: latency=0&#xA;       resources: memory:d0700000-d0703fff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: ens5&#xA;       version: 03&#xA;       serial: b4:99:ba:e6:ef:c7&#xA;       size: 1Gbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-2.fw ip=192.168.1.91 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;       resources: irq:17 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff memory:d0600000-d061ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have uninstalled &amp;amp; reinstalled bcmwl-kernel-source 6.30.223.271&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="15250" LastEditorUserId="308" LastEditDate="2018-08-07T18:28:18.463" LastActivityDate="2018-08-07T18:28:18.463" Title="wifi network unclaimed : broadcom" Tags="|release-loki|wifi|ethernet|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16008" PostTypeId="2" ParentId="16006" CreationDate="2018-07-28T01:43:20.607" Score="0" Body="&lt;p&gt;Having the same issue on my MacBook.  I removed the BCM STA kernel update and reinstalled via terminal commands.  It appears that the wl module make is failing with a error, so no driver is created.  I don't know how to fix, but this may help someone who does.&lt;/p&gt;&#xA;" OwnerUserId="15229" LastActivityDate="2018-07-28T01:43:20.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16009" PostTypeId="1" CreationDate="2018-07-28T04:37:13.120" Score="1" ViewCount="850" Body="&lt;p&gt;i am using hp notebook and i switched from windows to elementary OS and don't find support for AMD graphics card please give driver update&#xA;hope you will work on my request&lt;/p&gt;&#xA;" OwnerUserId="15254" LastActivityDate="2018-12-21T00:03:05.603" Title="add support for AMD graphics card" Tags="|pantheon-files|graphic-drivers|pantheon|elementary-website|amd|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16010" PostTypeId="1" CreationDate="2018-07-28T07:50:09.310" Score="0" ViewCount="199" Body="&lt;p&gt;I installed mate-system-monitor on my elementary OS Loki install via AppCenter, but I couldn't find it in the Applications menu. I searched for it, with no luck. So I uninstalled it, and installed it again in my terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;$ sudo apt install mate-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It installed propperly, so I searched in my applications menu but still couldn't find it. So I tried launching it from terminal.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ mate-system-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It worked partly as it opened up the monitor and the monitor worked fine. But the terminal showed errors.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;&#xA;Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;&#xA;Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;&#xA;Gtk-WARNING **: Unable to locate theme engine in module_path: &quot;pixmap&quot;&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&#xA;** (mate-system-monitor:6768): WARNING **: SELinux was found but is not enabled.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I fixed the first 4 lines by following &lt;a href=&quot;https://askubuntu.com/questions/66356/gdk-gtk-warnings-and-errors-from-the-command-line&quot;&gt;these&lt;/a&gt;, but how can I fix the last 2 lines and also be able to find the monitor in my Applications menu?&#xA;(I tried uninstalling and installing again, but it didn't work.)&lt;/p&gt;&#xA;" OwnerUserId="15255" LastEditorUserId="308" LastEditDate="2018-08-07T18:25:51.480" LastActivityDate="2018-12-07T05:02:05.420" Title="mate-system-monitor won't show in Application menus, plus errors when launched in terminal" Tags="|release-loki|pantheon-files|gtk|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16012" PostTypeId="2" ParentId="15985" CreationDate="2018-07-29T04:20:02.590" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Download Page:  &lt;a href=&quot;https://www.anaconda.com/download/#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download Site&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://docs.anaconda.com/anaconda/install/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installer Instructiions&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7591" LastActivityDate="2018-07-29T04:20:02.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16013" PostTypeId="2" ParentId="16010" CreationDate="2018-07-29T08:00:58.500" Score="0" Body="&lt;p&gt;I suspect the app menu does not find it because it does not install any appdata in metainfo.  Gnome system monitor provides this and does appear in the app menu.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-07-29T08:00:58.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16014" PostTypeId="1" CreationDate="2018-07-29T14:35:27.267" Score="1" ViewCount="516" Body="&lt;p&gt;I was set Alt + Shift to switch between Thai and US and works fine &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I need to use Alt + Shift + (other) key for VSCode but didn't work any help? &lt;/p&gt;&#xA;" OwnerUserId="15267" LastActivityDate="2019-01-05T01:03:05.647" Title="Can't use Alt+Shift anymore if it set to switch keyboard layout?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16015" PostTypeId="1" CreationDate="2018-07-29T21:38:53.217" Score="1" ViewCount="663" Body="&lt;ul&gt;&#xA;&lt;li&gt;Macbook Pro: Early 2011 running High Sierra 10.13.6&lt;/li&gt;&#xA;&lt;li&gt;Trying to install: elementary OS&lt;/li&gt;&#xA;&lt;li&gt;Created bootable USB using Etcher&lt;/li&gt;&#xA;&lt;li&gt;I've tried going into recovery mode and disabling SIP from the command line. This didn't help.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I partitioned the boot drive on the MBP. (750GB drive) Giving macOS 550GB and elementary OS 200GB.&#xA;Once I've created the bootable USB drive, I reboot my computer, hold &quot;option&quot; button. &#xA;I see the boot screen asking me to choose HD or &quot;EFI USB drive&quot;. I click on the EFI icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm then presented with a bios looking menu of options and I click on &quot;Run elementary without installing it&quot;. It then takes me to a screen with three rows of text&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;2.699652] Couldn't get size: 0x800000000000e&lt;/li&gt;&#xA;&lt;li&gt;2.699731]MODSIGN:Couldn't get UEFI db list&lt;/li&gt;&#xA;&lt;li&gt;2.716803] Couldn't get size: 0x800000000000e&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The same behavior happened on my 2009 27' iMac. I feel like I'm missing something. On a Windows machine I could tell the computer to only boot from USB, in the bios, but I don't know how to tell a Mac to do this. (Or if I even need to)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've made sure the USB drive was formatted properly (Fat32 GUID)&#xA;I've tried using a different USB drive. Same issue.&#xA;I tried and failed to install Fedora 28 Workstation too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have suggestions on how I can get High Sierra to recognize the USB drive?&lt;/p&gt;&#xA;" OwnerUserId="15268" LastEditorUserId="308" LastEditDate="2018-08-07T18:27:49.837" LastActivityDate="2023-12-15T16:00:55.127" Title="Unable to boot to elementary OS from USB - macOS High Sierra" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16016" PostTypeId="2" ParentId="4885" CreationDate="2018-07-30T20:06:40.020" Score="1" Body="&lt;p&gt;I'm not sure if it's the same as on Pop! OS, but assuming it is, the features are there.  They're just not visible from the UI.  You have to use the keyboard shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Toggle spam: Ctrl+J or ! &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;See the bug report &lt;a href=&quot;https://gitlab.gnome.org/GNOME/geary/issues/60&quot; rel=&quot;nofollow noreferrer&quot;&gt;Cannot mark messages as spam / not spam&lt;/a&gt; for details.&lt;/p&gt;&#xA;" OwnerUserId="15274" LastActivityDate="2018-07-30T20:06:40.020" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16018" PostTypeId="2" ParentId="16015" CreationDate="2018-07-31T06:22:29.290" Score="0" Body="&lt;p&gt;This may not be a traditional &quot;I fixed it&quot; answer, but it did solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;in macOS, go to the Apple App Store&lt;/li&gt;&#xA;&lt;li&gt;Install Parallels Lite (It's free)&lt;/li&gt;&#xA;&lt;li&gt;Install all the Linux distros you want. Including elementary OS. It works great.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After almost a week working on this issue... Parallels was a great 12 minute solution.&lt;/p&gt;&#xA;" OwnerUserId="15268" LastEditorUserId="308" LastEditDate="2019-12-06T06:45:59.053" LastActivityDate="2019-12-06T06:45:59.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16019" PostTypeId="1" CreationDate="2018-07-31T18:25:58.113" Score="0" ViewCount="547" Body="&lt;p&gt;On my HP Probook (non-touch screen) the display will randomly rotate. It does this on its own even when I'm not using it. Any suggestions on what it could be? &lt;/p&gt;&#xA;" OwnerUserId="567" LastActivityDate="2023-12-21T07:07:50.960" Title="Screen self rotates on Juno" Tags="|release-juno|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16020" PostTypeId="1" CreationDate="2018-07-31T21:28:01.730" Score="1" ViewCount="338" Body="&lt;p&gt;I bought your operating system today, but I can not download it. I suggest downloading directly from the server or via a magnet-link. No way works, nothing is downloaded. Tried different browsers and nothing happens. At purchase used the following e-mail address: mk.td@mail.ru&lt;/p&gt;&#xA;" OwnerUserId="15280" LastActivityDate="2020-01-02T12:02:45.303" Title="Downloads elementary os" Tags="|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16021" PostTypeId="2" ParentId="16020" CreationDate="2018-08-01T09:26:51.633" Score="2" Body="&lt;p&gt;If you depends on time you put &quot;0&quot; in other amount field and download elementaryOS. Of course you checked youe bank account if elementary.io collected money?&lt;/p&gt;&#xA;" OwnerUserId="11635" LastActivityDate="2018-08-01T09:26:51.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16026" PostTypeId="1" CreationDate="2018-08-01T16:22:49.120" Score="2" ViewCount="1458" Body="&lt;p&gt;I have a dual boot system, with elementary OS &amp;amp; Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I boot into elementary OS, I can see my Windows &quot;Documents&quot; folder on a drive when I open the &quot;Files&quot; app, but the drive &amp;amp; folder are not accessible if I try to open anything from within an app. I want to share the same &quot;Documents&quot; folder across both OSes, until I'm happy to move to Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't believe this hasn't been asked before, but I could find it searching on here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in anticipation,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ian&lt;/p&gt;&#xA;" OwnerUserId="15287" LastEditorUserId="308" LastEditDate="2018-08-07T18:29:42.150" LastActivityDate="2018-09-07T02:01:10.103" Title="How do I access files in my Windows Documents folder?" Tags="|release-loki|microsoft-windows|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16027" PostTypeId="2" ParentId="712" CreationDate="2018-08-01T19:33:40.627" Score="1" Body="&lt;p&gt;Follow @r3bl steps but use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;screenshot-tool --screen --clipboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will take a screenshot and save it to the clipboard too. These are all the options you can add:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;--window    Capture active window&#xA;--area      Capture area&#xA;--screen    Capture the whole screen&#xA;--delay     Take screenshot after specified delay&#xA;--grab      Include the pointer with the screenshot&#xA;--redact    Redact system text&#xA;--clipboard Save screenshot to clipboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15288" LastActivityDate="2018-08-01T19:33:40.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16029" PostTypeId="1" CreationDate="2018-08-02T11:01:58.960" Score="0" ViewCount="493" Body="&lt;p&gt;I ran into a problem with elementary OS Juno Beta. OS goes to sleep after a while when I'm away from PC, even when I have this disabled in power settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a huge problem for me because of 2 reasons:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;My network refuses to up the link after sleep;&lt;/li&gt;&#xA;&lt;li&gt;I need to have remote access to my PC sometimes when I am away.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;What I have already tried:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already tried to mask sleep targets via systemctl, but it produces another bug - screen turns constantly on after os fails to go to sleep, and some security policy becomes unavailable, so I need to enter password even to make a reboot then.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could anyone please help me to fix this weird sleep behavior?  &lt;/p&gt;&#xA;" OwnerUserId="15291" LastEditorUserId="308" LastEditDate="2018-08-07T18:29:16.020" LastActivityDate="2018-11-17T13:53:26.677" Title="elementary OS Juno beta goes to sleep when it is not supposed to" Tags="|suspend|release-juno|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2018-11-30T16:18:34.170" ContentLicense="CC BY-SA 4.0" />
  <row Id="16031" PostTypeId="1" CreationDate="2018-08-02T16:14:58.697" Score="2" ViewCount="931" Body="&lt;p&gt;Well, I have to say, the battery life from my Acer laptop while using the elementary OS is &lt;em&gt;horrible&lt;/em&gt;, while on a full charge, it says it has around 2~3h to discharge while using Debian &lt;strong&gt;without&lt;/strong&gt; tlp, laptop-mode-tools or powertop, handled 4~5h. I know that elementary OS is not lightweight, but why is that battery consumption so high?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes, I've read most posts/articles on &quot;how to improve my battery life&quot; like and most of them, did little to nothing at all. Any tips and tricks?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;inxi -F output&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WtMhF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WtMhF.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15295" LastEditorUserId="11882" LastEditDate="2020-01-01T06:02:59.767" LastActivityDate="2024-01-10T16:06:20.740" Title="elementary OS Loki - Horrible battery life" Tags="|battery|performance|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16032" PostTypeId="2" ParentId="16006" CreationDate="2018-08-02T20:08:25.793" Score="0" Body="&lt;p&gt;This has cleared itself up after an OS component update using the AppCenter. It downloaded 6 components. &lt;/p&gt;&#xA;" OwnerUserId="15250" LastActivityDate="2018-08-02T20:08:25.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16033" PostTypeId="2" ParentId="14608" CreationDate="2018-08-02T23:58:08.433" Score="0" Body="&lt;p&gt;I wanted to say that all I had to do was reinstalled the OS again.  Now I'd working perfectly.  &lt;/p&gt;&#xA;" OwnerUserId="13529" LastActivityDate="2018-08-02T23:58:08.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16034" PostTypeId="2" ParentId="15917" CreationDate="2018-08-03T04:49:31.750" Score="1" Body="&lt;p&gt;there is a bug in the latest kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this will fix it for you&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r peaq_wmi&#xA;&#xA;sudo modprobe -r eeepc_wmi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15298" LastEditorUserId="16827" LastEditDate="2019-04-19T21:48:32.190" LastActivityDate="2019-04-19T21:48:32.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16036" PostTypeId="2" ParentId="13675" CreationDate="2018-08-03T08:56:36.273" Score="0" Body="&lt;p&gt;I had the same issue here, I added Hebrew and got Russian only formats. It was no help deleting all other languages.&lt;br&gt;&#xA;Finally succeeded! I had to hit 'set language', then English came out.&lt;/p&gt;&#xA;" OwnerUserId="15300" LastEditorUserId="8517" LastEditDate="2020-04-30T14:25:14.313" LastActivityDate="2020-04-30T14:25:14.313" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16037" PostTypeId="1" AcceptedAnswerId="18449" CreationDate="2018-08-03T13:38:15.030" Score="1" ViewCount="231" Body="&lt;p&gt;I have a weird bug where my cursor keeps clicking and moving by itself randomly on the screen. This started happening a couple weeks ago, it does not happen on my secondary boot, so it's not a hardware issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Its hard to write this, because mouse keeps losing focus of the input.&#xA;My trackpad sometimes stop working either, don't know if its related.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's really annoying, I'm almost installing another OS. Any ideas how to debug?&lt;/p&gt;&#xA;" OwnerUserId="13833" LastActivityDate="2019-03-09T03:46:08.077" Title="Mouse randomly moves and clicks everywhere" Tags="|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16047" PostTypeId="2" ParentId="14080" CreationDate="2018-08-05T11:32:13.457" Score="1" Body="&lt;p&gt;It sounds like the live image is booting again. Have you removed the installation media (USB, DVD) etc after installation? &lt;/p&gt;&#xA;" OwnerUserId="15322" LastActivityDate="2018-08-05T11:32:13.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16049" PostTypeId="2" ParentId="16026" CreationDate="2018-08-05T20:34:34.633" Score="1" Body="&lt;p&gt;For the OSes to share common folders, you have to edit the fstab file to mount the Windows partition on boot, then change your default documents folder location.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Mount Windows partition on boot&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;This steps are taken from &lt;a href=&quot;https://askubuntu.com/a/236222/851212&quot;&gt;this answer&lt;/a&gt; which also list terminal-only instructions. Here i will just copy the visual way of doing it, for easy access.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the answer was for ubuntu, you have to install the Disks application fist, cause elementaryOS does not come with it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the terminal and run this command to install it: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt install gnome-disk-utility&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once opened, on its main window, &quot;Disks&quot; graphically shows you your current partition layout.&#xA;Now simply choose the NTFS partition of windows that you want to automatically mount on boot, then click on the small gears icon slightly below it. From the menu choose:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;‘Edit Mount Options…’&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;From the next window that is shown, move the slider button to the left, next to the ‘Automatic Mount Options’ label, to gain access to the settings. Keep the check-marked option ‘Mount at startup’. Select/Fill the next four options if you wish, like &quot;Mount Point&quot;. For example: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;/home/$Luser/windows/&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note: $Luser is your elementaryOS user.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Now reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;Changing the Documents folder&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;The locations of every user directory are in &quot;~/.config/user-dirs.dirs&quot;.&#xA;Open this file in scratch:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;scratch-text-editor ~/.config/user-dirs.dirs&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Search for this line in the file:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;XDG_DOCUMENTS_DIR=&quot;$HOME/Documents&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Replace &quot;$HOME/Documents&quot; with the path to the Windows Documents folder. So it would be somehing like this: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;XDG_DOCUMENTS_DIR=&quot;/home/$Luser/Windows/Users/$Wuser/Documents&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note: $Wuser is your windows user.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Now just copy all your files in your old documents folder to the new one, then reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15319" LastActivityDate="2018-08-05T20:34:34.633" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="16050" PostTypeId="1" CreationDate="2018-08-06T02:18:36.370" Score="0" ViewCount="89" Body="&lt;p&gt;I feel it's a bit annoying to minimize the app manually each time I turn my computer on, and i dont want, if there's a person next to me, that they see everything I'm downloading :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried adding --minimized or -m but it didn't worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerDisplayName="user7406" LastActivityDate="2024-03-25T14:07:10.760" Title="Is there a way to start Torrential minimized or in the tray?" Tags="|startup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16051" PostTypeId="2" ParentId="15179" CreationDate="2018-08-06T10:04:32.600" Score="0" Body="&lt;p&gt;I don't think snap packages will come to eOS 5.0 because it would pretty much obsolete the eOS App Center. However, if you know which software you'd like to have, you can simply install snap and download your software (Spotify is one I can think of) via&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;apt install snapd&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You install things with:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;snap install&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and add the package name at the end like snap install spotify for instance.&lt;/p&gt;&#xA;" OwnerUserId="14636" LastActivityDate="2018-08-06T10:04:32.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16054" PostTypeId="2" ParentId="14483" CreationDate="2018-08-06T22:24:31.227" Score="1" Body="&lt;p&gt;Same problem with an Nvidia graphic card (GeForce 210). After an update, I couldn't login to the main account. After some research and trying different things, this solved it for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you are in the login screen, enter the terminal by pressing ctrl+alt+f1 and then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove bumblebee&#xA;sudo apt-get remove nvidia*&#xA;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt update&#xA;sudo ubuntu-drivers list&#xA;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="15326" LastEditorUserId="138" LastEditDate="2018-10-08T15:03:28.730" LastActivityDate="2018-10-08T15:03:28.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16055" PostTypeId="1" AcceptedAnswerId="18231" CreationDate="2018-08-07T00:54:31.597" Score="0" ViewCount="151" Body="&lt;p&gt;I want to replace OSX with elementary OS on a mac.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I formatted the entire hard disk, inserted the elementary OS USB, selected &quot;efi boot&quot; on the boot loader (only option) and installed elementary OS. Everything works well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The computer boots normally into elementary OS, but if i press the &lt;kbd&gt;option&lt;/kbd&gt; key on boot, nothing shows on the bootloader.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If i install, choose something else and create just the root and swap partition i get a Windows partition on the boot loader. This leads me to think that is something related to installing in the efi mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know what could be happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, why when i insert the live &lt;a href=&quot;/questions/tagged/usb&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;usb&amp;#39;&quot; rel=&quot;tag&quot;&gt;usb&lt;/a&gt; i only get the EFI option and not the windows (bios mode) option when i press the &lt;kbd&gt;option&lt;/kbd&gt; key? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastEditorUserId="16827" LastEditDate="2019-02-10T17:07:38.753" LastActivityDate="2019-02-10T17:07:38.753" Title="Replacing OSX with elementary OS. Computer boots normally into elementary OS, but boot menu (option key on boot) doesn't show anything" Tags="|macbook|apple|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16056" PostTypeId="2" ParentId="10664" CreationDate="2018-08-07T18:35:29.423" Score="2" Body="&lt;p&gt;It's important to understand how GNOME works: individual contributors can say whatever they want as “PSAs” on social media, but the GNOME Foundation does not have an official stance on Vala.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In fact, Vala is being well-maintained, and both GNOME and elementary continue to use it (and contribute back when needed!). elementary exclusively writes code in Vala, and many of the core GNOME apps are in Vala as well. And elementary at least plans to continue to use and contribute to Vala for the foreseeable future.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As another GNOME contributor Michael Cotanzaro &lt;a href=&quot;https://blogs.gnome.org/mcatanzaro/2017/02/19/on-problems-with-vala/&quot; rel=&quot;nofollow noreferrer&quot;&gt;has written&lt;/a&gt;, &lt;strong&gt;Vala is still the best choice for GNOME and GTK development.&lt;/strong&gt; It's a purpose-built language for GTK, after all, which means its bindings and integration are second-to-none.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the future if a language like Rust or Go exceeds the tight integrations into the GNOME stack with bindings and lots of example code, then maybe those languages would make more sense. But right now Vala is in an excellent position and the talk of its death (mostly from a single developer's personal blog post) are greatly exaggerated.&lt;/p&gt;&#xA;" OwnerUserId="308" LastEditorUserId="308" LastEditDate="2019-12-06T06:42:07.443" LastActivityDate="2019-12-06T06:42:07.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16058" PostTypeId="1" CreationDate="2018-08-08T17:08:47.050" Score="1" ViewCount="555" Body="&lt;p&gt;TL;DR &#xA;Black screen after resuming the suspend (from closing the lid), by opening the lid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But works fine if suspended by other method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;andpleasehelpme&#xA;I've just installed and tweaked with Elementary OS 0.4.1 Loki for a few days now. Planning to use this as my primary OS, but suspend is not working properly for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for other many issues I've encountered, I've managed to find a solution, but I can't seem to get suspend to work properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've updated my kernel to 4.17.13 and NVIDIA drivers to 390.77&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nothing seems to work. After testing a bunch of ways and playing around, it seems like if I suspend using the power button or using the power option, resuming the machine by clicking the power button again would wake the machine with no problem. And this is all while the lid is open (obviously).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Another thing I realised is that if I press any key while the machine is suspended, the keyboard will lit up but the machine will still be suspended. Is this normal?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the issue is when I close the lid, and it is suspended, and opening up the lit. The machine will resume and I greeted with.... well, nothing! I can Ctrl + Alt + F1, which proves that the machine is resumed. And to make it worst, it forces itself back to sleep (looping again and again if I keep waking it up to see the black screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the relevant syslog (log too long, can't fit in the textbox).&#xA;&lt;a href=&quot;https://gist.github.com/muazamkamal/b9ed4596e32d2c7bec75f54dc4de4f42&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/muazamkamal/b9ed4596e32d2c7bec75f54dc4de4f42&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15335" LastEditorUserId="15335" LastEditDate="2018-08-10T14:37:16.433" LastActivityDate="2019-04-19T10:03:20.693" Title="Black screen after suspend (but not if suspend by power button)" Tags="|release-loki|suspend|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16060" PostTypeId="1" CreationDate="2018-08-09T15:00:21.373" Score="0" ViewCount="67" Body="&lt;p&gt;For some reason I'm unable to update this. It's only 25.3 MB(29 components).&#xA;I get the message 'waiting for package manager lock', but this disappears and the updates do not happen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've never had any problems with standard elementary OS updates before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind Regards&lt;br&gt;&#xA;Nick.&lt;/p&gt;&#xA;" OwnerUserId="15170" LastEditorUserId="16827" LastEditDate="2019-04-16T14:29:15.707" LastActivityDate="2023-12-22T01:02:05.243" Title="Unable to push latest software update in Loki" Tags="|release-loki|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16062" PostTypeId="2" ParentId="1194" CreationDate="2018-08-09T20:34:33.370" Score="0" Body="&lt;p&gt;I have the same issue with a wingpanel clock. I tried all instructions above, but it wasn't helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are processes of the indicator:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/87XRr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/87XRr.jpg&quot; alt=&quot;https://s15.postimg.cc/9qu8rodnf/Screenshot_from_2018-08-09_23.09.53.jpg&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, it should work. However it doesn't:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bOFFz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bOFFz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone tell me how to fix this bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Done! This one works:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall wingpanel-indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10318" LastEditorUserId="10318" LastEditDate="2018-08-14T22:09:35.610" LastActivityDate="2018-08-14T22:09:35.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16063" PostTypeId="2" ParentId="14872" CreationDate="2018-08-10T14:27:12.733" Score="2" Body="&lt;p&gt;I just ordered this tablet and am waiting for it arrive but looking around for linux drivers I found that Xp Pen have actually released a linux driver Checkout this page &lt;a href=&quot;https://www.xp-pen.com/download/index/cid/36.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.xp-pen.com/download/index/cid/36.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15345" LastActivityDate="2018-08-10T14:27:12.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16065" PostTypeId="1" CreationDate="2018-08-10T21:01:53.420" Score="0" ViewCount="817" Body="&lt;p&gt;I recently installed elementary on my laptop, but the screen kept flickering. I followed the instructions on this post &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2061180&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2061180&lt;/a&gt;, but when I restarted my computer there was only a black screen to greet me. I've tried pressing CTRL-ALT-F1 but nothing shows up. I don't know how to fix this since I can no longer log into my account and can't access the terminal&lt;/p&gt;&#xA;" OwnerUserId="15347" LastActivityDate="2023-12-15T00:05:40.620" Title="Upgraded Nvidia and now have blank screen" Tags="|system-installation|graphics|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16066" PostTypeId="1" CreationDate="2018-08-11T03:27:50.893" Score="0" ViewCount="99" Body="&lt;p&gt;I recently installed elementary on my laptop, but the wifi is recognized with a low signal percentage although it is on the side of the modem and when I am a bit far away it does not even recognize it. The only solution is to use ethernet. any solution?&#xA;my computer is this.&#xA;I believe I am not the first to have this problem, but I can't seem to find similar question in Elementary forums.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LX3pY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LX3pY.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15349" LastActivityDate="2024-03-13T14:04:50.610" Title="Problems when recognizing wifi connection" Tags="|wifi|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16068" PostTypeId="1" CreationDate="2018-08-11T12:43:32.643" Score="1" ViewCount="158" Body="&lt;p&gt;I tried to install elementary os from a live USB with unetbootin on Ubuntu, following the instructions on the EOS site. I chose the option to install alongside Ubuntu and created a new 200GB elementary OS partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installer said that everything had worked, and to restart my computer, but now I can only boot into ubuntu, the new partiton appearing as a 200GB external drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this? I have tried changing the boot order in the startup menu but there is only one UEFI partition to boot from called &quot;ubuntu&quot;, and no elementary OS partition, even though it exists on my system.&lt;/p&gt;&#xA;" OwnerUserId="15353" LastActivityDate="2020-05-25T11:01:05.137" Title="cannot install elementary os on ubuntu" Tags="|system-installation|live-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16069" PostTypeId="1" CreationDate="2018-08-11T12:55:57.303" Score="2" ViewCount="4197" Body="&lt;p&gt;Dear ElementaryOS users,&#xA;a questions popped up in my mind: why should anyone use Epiphany over Firefox? &#xA;Mine is NOT a blind criticism on the elementary team, rather a pure curiosity. &#xA;In Elementary Juno BETA I can sync it with Firefox, but so far I cannot seem to find a way to do that; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is anyone sincerely using Epiphany over Firefox? If so, what made you switch?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...I mean I am trying to watch youtube videos and the glitches are almost unbearable...  &lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2020-08-17T11:19:10.250" Title="Why Epiphany over Firefox?" Tags="|firefox|epiphany|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16070" PostTypeId="2" ParentId="16068" CreationDate="2018-08-11T13:01:25.300" Score="1" Body="&lt;p&gt;It seems to be a problem from GRUB, the bootloader. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://lockone.wordpress.com/2013/12/23/elementary-os-editing-the-grub-bootloader/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Would this help?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-08-11T13:01:25.300" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16072" PostTypeId="2" ParentId="15915" CreationDate="2018-08-11T15:27:35.243" Score="0" Body="&lt;p&gt;Strangely, VirtualBox was able to put an icon on the desktop. The .desktop file it created is in ~/Desktop/, no surpises there. And it works! So it looks as if the capability is still there, all they took out was the tools to create desktop items from the GUI. If you are comfortable creating .desktop files from scratch, it should be possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BUFL5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BUFL5.png&quot; alt=&quot;VirtualBox Icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14427" LastActivityDate="2018-08-11T15:27:35.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16074" PostTypeId="2" ParentId="15905" CreationDate="2018-08-11T17:58:50.323" Score="3" Body="&lt;p&gt;Try this workaround from Matt Harris. I've tested with Skype and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-08-11T17:58:50.323" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16075" PostTypeId="2" ParentId="16066" CreationDate="2018-08-11T23:32:40.270" Score="0" Body="&lt;p&gt;Try to type in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nmcli radio wifi on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Let me know if that solves your problem  &lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-08-11T23:32:40.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16076" PostTypeId="2" ParentId="16065" CreationDate="2018-08-11T23:40:06.953" Score="0" Body="&lt;p&gt;This is a common error when the system doesn't know what driver to use. &#xA;To install nvidia propretary drivers is quite simple:&#xA;-You need a piece of software called &lt;strong&gt;Software &amp;amp; Updates&lt;/strong&gt;; &#xA;Apart from being able to control all the PPA installed and repositories, under the &lt;strong&gt;additional drivers&lt;/strong&gt; section you can swap in-between proprietary drivers for nvidia and the open source Nouveau drivers counterpart. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Software &amp;amp; Updates:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-gtk software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I always suggest to create the configuration file at the end of the driver installation:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nvidia-xconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-08-11T23:40:06.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16077" PostTypeId="2" ParentId="16060" CreationDate="2018-08-11T23:42:25.900" Score="0" Body="&lt;p&gt;Tried via terminal? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-08-11T23:42:25.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16078" PostTypeId="2" ParentId="16069" CreationDate="2018-08-12T09:28:30.463" Score="1" Body="&lt;p&gt;I always found Firefox to be unreasonably slow and resource demanding for basic web surfing: right now, it is using ten times the memory that Epiphany uses (I am looking at the system monitor with both browser open, same amount of tabs, same websites, Firefox sync disabled and the only Firefox extension I have is uBlock).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox, while nowhere near as popular as Chrome and its derivatives (Chromium, Opera, etc.), is still a fairly well-known cross-platform browser. Most websites include Firefox in their testing, which means that you rarely end up with incorrectly rendered content; whereas with Epiphany, you'll sometimes run into issues (in particular, I find that HTML5 videos will occasionally crash the tab without apparent reason). Hence the generally positive attitude towards Firefox, and the occasional complaints about Epiphany being pre-installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally, I prefer Epiphany mostly because of the design—it looks and feels at home on elementary OS, and it is sufficiently advanced for my daily usage (although I do miss Reddit Enhancement Suite and one or two other plug-ins I had installed back when I was still using Opera… I really wish the devs would get around to re-implementing plug-in support in Epiphany, at least for userscripts).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That said, Mozilla have been hard at work on a lot of improvements to Firefox, combining various techniques from different browser engines into one new, state-of-the-art engine. They're going to start switching out different components in the coming versions (as far as I'm aware, the current nightly build already includes the new CSS module, although it might be toggled off by default). If all goes well, Firefox should rise from its current, rather unfortunate position back to the top of the performance race over the next year or two… it'll probably still use a little more RAM in idle than Epiphany, but that's pretty much unavoidable, given that it has more features built-in.&lt;/p&gt;&#xA;" OwnerUserId="15360" LastActivityDate="2018-08-12T09:28:30.463" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16079" PostTypeId="1" CreationDate="2018-08-12T15:01:42.783" Score="0" ViewCount="666" Body="&lt;p&gt;I recently installed elementary on my laptop and in the partition of the system use 50 gb but it took only two days using it and says that the space in root filesystem is full, I do not understand because if the requirements for elementary OS are 15 gb&#xA;any solution?&lt;/p&gt;&#xA;" OwnerUserId="15349" LastActivityDate="2023-12-18T21:05:30.627" Title="Low Disk Space on File System root problem" Tags="|filesystem|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16080" PostTypeId="2" ParentId="2290" CreationDate="2018-08-12T18:26:40.067" Score="1" Body="&lt;p&gt;Not even kidding, I followed a youtube tutorial that involved a bit of aluminum foil and paper in my magic mouse and it FINALLY connected and paired to my computer... Apparently Apple messed up the dimensions of their magic mouse and those small changes corrected it. Here's the video I'm talking about: &lt;a href=&quot;https://www.youtube.com/watch?v=7vlDEVfV45s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=7vlDEVfV45s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15362" LastActivityDate="2018-08-12T18:26:40.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16083" PostTypeId="1" AcceptedAnswerId="16085" CreationDate="2018-08-13T10:01:31.670" Score="1" ViewCount="706" Body="&lt;p&gt;First of all, I want to thank you guys for all your hard work. I really enjoy the consistency and fluidity of Elementary OS.&#xA;The custom basic applications follow those patterns nicely and they are well integrated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The new text editor Code still named as io.elementary.code.&#xA;I assume that this will change since it is still in the beta to make CLI a lot easier, I was wondering what that name would be. Naming it simply code would conflict with Microsofts Visual Studio Code.&#xA;I hope that is something that is kept in mind due to VS Code being quite popular.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you and keep up the good work.&lt;/p&gt;&#xA;" OwnerUserId="15368" LastActivityDate="2018-08-13T15:26:40.923" Title="io.elementary.code application name" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16085" PostTypeId="2" ParentId="16083" CreationDate="2018-08-13T15:26:40.923" Score="2" Body="&lt;p&gt;The name won't change.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Further, we’re adopting RDNN across our apps. This is encouraged by FreeDesktop.Org projects like D-BUS as well as by GNOME, so we’re being consistent both with ourselves and other major Open Source projects.&lt;/p&gt;&#xA;&lt;p&gt;Moving forward, an elementary app with a generic name Baz would have a repository of github.com/elementary/baz, an app ID (including .desktop and AppData filenames) of io.elementary.baz, a binary of io.elementary.baz, and a gsettings path of /io/elementary/baz. User-facing, we’ll continue to refer to apps by their generic names (just “Baz”) as well.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://medium.com/elementaryos/cleaning-up-app-codenames-ef9fc637ddef#044c&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/cleaning-up-app-codenames-ef9fc637ddef#044c&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="227" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-08-13T15:26:40.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16088" PostTypeId="2" ParentId="12770" CreationDate="2018-08-14T09:03:24.827" Score="1" Body="&lt;p&gt;StartupWMClass is only used to group windows with the same class name. You need to look at changing the class with the exec command if the program supports gtk options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try running the executable with &lt;code&gt;--class=&quot;Popcorn-Time&quot;&lt;/code&gt;. Worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See also:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/a/809353/545569&quot;&gt;https://askubuntu.com/a/809353/545569&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/popcorn-official/popcorn-desktop/issues/305&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/popcorn-official/popcorn-desktop/issues/305&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/micheleg/dash-to-dock/issues/483&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/micheleg/dash-to-dock/issues/483&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="10290" LastEditorUserId="10290" LastEditDate="2018-08-14T09:10:15.413" LastActivityDate="2018-08-14T09:10:15.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16091" PostTypeId="1" CreationDate="2018-08-14T22:33:30.600" Score="1" ViewCount="1108" Body="&lt;p&gt;After write my password the screens goes and give a line of code not readable for one second then goes back to login screen. Any help ? I have almost all my work there is an a partition on my surface pro 2017.&lt;/p&gt;&#xA;" OwnerUserId="15377" LastActivityDate="2018-11-13T19:41:13.553" Title="Login loop screen problem" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16093" PostTypeId="2" ParentId="16079" CreationDate="2018-08-15T12:10:00.320" Score="0" Body="&lt;p&gt;Very &lt;strong&gt;dependent upon how the disk is/was partitioned ...&lt;/strong&gt; (in a terminal) if you do the following few commands we should be able to determine if it is a &quot;partitioning&quot; issue ... the commands and post your output&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;df -h&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;grep -v ^# /etc/fstab&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;now to determine WHERE the space is going&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo su -&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cd /&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;du -sh * 2&amp;gt; /dev/null&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Explanations:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;df -h&lt;/code&gt; == a picture of you disk usage by mount point&lt;br&gt;&#xA;&lt;code&gt;grep -v ^# /etc/fstab&lt;/code&gt; == a list of host the &quot;disks&quot; are mounted&lt;br&gt;&#xA;&lt;code&gt;du -sh * 2&amp;gt; /dev/null&lt;/code&gt; == disk used by directory without any error msgs&lt;/p&gt;&#xA;" OwnerUserId="3581" LastEditorUserId="19360" LastEditDate="2019-12-09T10:48:54.480" LastActivityDate="2019-12-09T10:48:54.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16094" PostTypeId="2" ParentId="7006" CreationDate="2018-08-15T17:48:14.600" Score="0" Body="&lt;p&gt;In my experience ,Nitrogen doesnt work only dual monitor wallpaper settings in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After setting Nitrogen, open dconf-editor and go to &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;org &gt; gnome &gt; desktop &gt; background&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then turn off show-desktop-icons and change picture-options to wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I sucseeded to activate Nitrogen settings.&lt;/p&gt;&#xA;" OwnerUserId="15382" LastActivityDate="2018-08-15T17:48:14.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16096" PostTypeId="2" ParentId="15856" CreationDate="2018-08-16T11:16:38.330" Score="1" Body="&lt;p&gt;In case anyone faces this same issue, try removing the variable &lt;code&gt;$vt_handoff&lt;/code&gt; from the boot command of whichever kernel your trying to boot in &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt; (or alternatively remove all instances). This can be done via the following script (taken from &lt;a href=&quot;https://www.thefanclub.co.za/how-to/how-fix-ubuntu-boot-splash-screen-after-grub-updates&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.thefanclub.co.za/how-to/how-fix-ubuntu-boot-splash-screen-after-grub-updates&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;# Fix Ubuntu Plymouth Boot Splash &#xA;# if entry exists for $vt_handoff use sed to search and replace&#xA;# write to tmp file - move to original &#xA;&#xA;checkVT=$(grep -c &quot;\$vt_handoff&quot; /boot/grub/grub.cfg)&#xA;&#xA;if [ ! &quot;$checkVT&quot; -eq &quot;0&quot; ] &#xA;   then&#xA;     echo &quot;&amp;gt; Found vt_handoff removing ...&quot;&#xA;     sudo sed 's/$vt_handoff//g' /boot/grub/grub.cfg &amp;gt; /tmp/.grub.cfg&#xA;     sudo mv /boot/grub/grub.cfg /boot/grub/grub.cfg.backup&#xA;     sudo mv /tmp/.grub.cfg /boot/grub/grub.cfg&#xA;   fi&#xA;&#xA;echo &quot;&amp;gt; Done&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What happened in my case was that I would install a fresh instance of Elementary and everything would be fine. Then a kernel update would come along and I would install that, which would then in turn run &lt;code&gt;update-grub&lt;/code&gt;. Part of the outcome of running this command adds the &lt;code&gt;$vt_handoff&lt;/code&gt; variable to every kernel boot command in &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;, which explains why I was seeing the same behavior no matter which kernel I attempted to boot. Then, since I don't typically restart my computer often, I wouldn't notice any issues until I was forced to restart it (due to it freezing because of a completely unrelated issue), resulting in the boot hanging at the splash screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ironically, &lt;code&gt;$vt_handoff&lt;/code&gt; is meant to provide a better, smoother boot experience, that displays a fancier screen other than just simply a black one. Unfortunately in many cases it simply just causes the boot process to hang.&lt;/p&gt;&#xA;" OwnerUserId="15052" LastActivityDate="2018-08-16T11:16:38.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16097" PostTypeId="2" ParentId="16001" CreationDate="2018-08-16T13:16:58.507" Score="1" Body="&lt;p&gt;One of your error message is a &lt;a href=&quot;https://github.com/elementary/appcenter/issues/499&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug&lt;/a&gt;. Unfortunately there is no workaround yet. You can assign this bug, so you are pinged, when something new happens.&lt;/p&gt;&#xA;" OwnerUserId="34" LastActivityDate="2018-08-16T13:16:58.507" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16099" PostTypeId="1" CreationDate="2018-08-17T08:44:02.480" Score="3" ViewCount="4543" Body="&lt;p&gt;I am looking for a way to update my current  machine running elementary os loki to juno. How do I do that &lt;/p&gt;&#xA;" OwnerUserId="15386" LastActivityDate="2018-12-19T07:03:05.643" Title="How can I update from elementary os loki to newer version Juno" Tags="|release-loki|updates|release-juno|" AnswerCount="2" CommentCount="0" ClosedDate="2019-01-02T23:27:44.360" ContentLicense="CC BY-SA 4.0" />
  <row Id="16102" PostTypeId="1" CreationDate="2018-08-17T23:35:24.233" Score="0" ViewCount="2123" Body="&lt;p&gt;I'm switching to Linux to save my old 2010 Macbook, since it is almost unusable with the newer versions Mac OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just finished setting up Elementary OS, but the wifi will not work. During setup, I was asked to configure a network, and I entered my Wifi network and password. However when I actually log in, there is no network connection. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go to System Settings, Ethernet is the only available option. Under &quot;Edit connections...&quot; I can see my wifi network, as configured, but I have no way to connect to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the instructions in this thread &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8910/wifi-on-macbook-pro-12-1-early-2015&quot;&gt;WiFi on MacBook Pro (12,1 - Early 2015)&lt;/a&gt; but no luck. It looks like the firmware linked to in there is for Broadcom chips in newer Macs (2013 onwards). Do I need a different driver?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By th way, for some reason, plugging in the ethernet doesn't do anything, either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would really appreciate any help. :)&lt;/p&gt;&#xA;" OwnerUserId="15392" LastActivityDate="2020-06-10T13:11:19.570" Title="No wifi on Macbook Pro mid 2010" Tags="|wifi|networking|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16103" PostTypeId="2" ParentId="81" CreationDate="2018-08-18T05:40:45.987" Score="0" Body="&lt;p&gt;This is a bit of a hack however in Loki (0.4.1) You can right-click on the login background image and set it as desktop, then through the command line enter the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///path/to/file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the user's background image. Allowing you to have different images.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a bit hacky but it is the simplest way (2ish steps)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EG:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///home/wwjdtd/pictures/801.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15393" LastActivityDate="2018-08-18T05:40:45.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16104" PostTypeId="2" ParentId="4041" CreationDate="2018-08-18T05:45:43.847" Score="0" Body="&lt;p&gt;This is a bit of a hack however in Loki (0.4.1) You can right-click on the login background image and set it as desktop, then through the command line enter the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///path/to/file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the user's background image. Allowing you to have different images.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a bit hacky but it is the simplest way (2ish steps)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EG:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///home/wwjdtd/pictures/801.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15393" LastActivityDate="2018-08-18T05:45:43.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16105" PostTypeId="2" ParentId="15013" CreationDate="2018-08-18T05:49:41.763" Score="0" Body="&lt;p&gt;This is a bit of a hack however in Loki (0.4.1) You can right-click on the login background image and set it as desktop, then through the command line enter the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///path/to/file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set the user's background image. Allowing you to have different images.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a bit hacky but it is the simplest way (2ish steps)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EG:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.background picture-uri file:///home/wwjdtd/pictures/801.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15393" LastActivityDate="2018-08-18T05:49:41.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16107" PostTypeId="2" ParentId="15749" CreationDate="2018-08-18T08:59:44.050" Score="0" Body="&lt;p&gt;I have finally solved this problem.  I brought the printer back home to the UK and it failed to print when connected to my other mini PC running Loki at home.  It also failed to print when connected to a Windows PC, though it was detected and Windows automatically installed a driver for it.  The problem proved to be a faulty printer cable which apparently allowed the computers to see the printer but must have had one broken wire which prevented printing.  A different cable solved the problem.  Now I have to carry the printer back to Turkey!  The moral is always try a spare cable first.&lt;/p&gt;&#xA;" OwnerUserId="12846" LastActivityDate="2018-08-18T08:59:44.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16109" PostTypeId="2" ParentId="12955" CreationDate="2018-08-18T11:47:26.970" Score="0" Body="&lt;p&gt;In sound settings simply switch Mode&lt;/p&gt;&#xA;" OwnerUserId="15397" LastActivityDate="2018-08-18T11:47:26.970" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16112" PostTypeId="1" CreationDate="2018-08-19T15:10:37.407" Score="0" ViewCount="220" Body="&lt;p&gt;Trying to edit a program to have a command specified before launching the program.&lt;/p&gt;&#xA;&lt;p&gt;Adding it using MenuLibre doesn't work, manually doing it doesn't work, have tried rebooting several times.&lt;/p&gt;&#xA;&lt;p&gt;Any edit to the main .desktop file (/usr/share/applications/obs.desktop) removes the program from the launcher (until I purge/reinstall as far as I can tell).&lt;/p&gt;&#xA;&lt;p&gt;Edit: It seems as if it only doesn't like me adding the command before the program at the &amp;quot;exec&amp;quot; line. Works fine otherwise.&lt;/p&gt;&#xA;&lt;p&gt;Edit2: Workaround: Have it execute a bash script with the command.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;[Desktop Entry]&lt;/p&gt;&#xA;&lt;p&gt;Version=1.0&lt;/p&gt;&#xA;&lt;p&gt;Name=OBS&lt;/p&gt;&#xA;&lt;p&gt;GenericName=Streaming/Recording Software&lt;/p&gt;&#xA;&lt;p&gt;Comment=Free and Open Source Streaming/Recording Software&lt;/p&gt;&#xA;&lt;p&gt;Comment[ru]=Бесплатная программа с открытым кодом для записи/трансляции видео&lt;/p&gt;&#xA;&lt;p&gt;Exec=LIBGL_ALWAYS_SOFTWARE=1 obs&lt;/p&gt;&#xA;&lt;p&gt;Icon=obs&lt;/p&gt;&#xA;&lt;p&gt;Terminal=false&lt;/p&gt;&#xA;&lt;p&gt;Type=Application&lt;/p&gt;&#xA;&lt;p&gt;Categories=AudioVideo;Recorder;&lt;/p&gt;&#xA;&lt;p&gt;StartupNotify=true&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="15409" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2023-12-25T14:01:55.220" Title="Can't add/edit programs to launcher" Tags="|release-loki|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16113" PostTypeId="1" CreationDate="2018-08-19T17:56:10.633" Score="0" ViewCount="352" Body="&lt;p&gt;Since I had no answers writing in Portugese, I'll try to translate my problem to English.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to update the system and some apps via AppCenter (I guessing the name of the store like application, since my system language is Portuguese) but every time I got the same answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;b&gt;&quot;Waiting for the package manager block&quot; &lt;/b&gt; (trying to translate the message).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then I can't update anything, neither the system or the apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened after I tried to install the latest updates but it was taking a very long time to finish (like 2 hours) and then I had to shut down the computer, but I couldn't because of the updating process. So I had to force shut down. After that, I always get this message when I try to install any update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone please help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="13355" LastEditorUserId="138" LastEditDate="2018-10-08T14:59:50.530" LastActivityDate="2023-12-12T22:01:25.180" Title="Package manager blocked" Tags="|updates|appcenter|package-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16114" PostTypeId="2" ParentId="16099" CreationDate="2018-08-20T00:44:46.470" Score="1" Body="&lt;p&gt;My understanding is that there is no way to upgrade from 0.4 Loki to 5.0 Juno. Juno is still in beta and is not currently a stable release. You can download and compile the beta via the official website through the following link: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://developer.elementary.io/#beta&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.elementary.io/#beta&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, the Ubuntu fan site OMG!Ubuntu! has a direct download link at the bottom of a news article for the Juno beta that contains an ISO image for the beta: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.omgubuntu.co.uk/2018/07/elementary-os-juno-beta-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.omgubuntu.co.uk/2018/07/elementary-os-juno-beta-download&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15410" LastActivityDate="2018-08-20T00:44:46.470" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16119" PostTypeId="2" ParentId="15992" CreationDate="2018-08-22T15:25:49.337" Score="0" Body="&lt;p&gt;Maybe this is useful for you:&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784152&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1784152&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i get same error followed with:&#xA;Cannot enable. Maybe the USB cable is bad?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you answer error to google there is a lot people with same error menssage maybe you can find the answer&lt;/p&gt;&#xA;" OwnerUserId="15430" LastActivityDate="2018-08-22T15:25:49.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16120" PostTypeId="2" ParentId="14279" CreationDate="2018-08-22T15:58:12.223" Score="0" Body="&lt;p&gt;Actually this is an User Experience issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JMcy9.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JMcy9.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The good news is: it works.&lt;br&gt;&#xA;The bad news: It's freakin' confusing.&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-22T15:58:12.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16121" PostTypeId="2" ParentId="16112" CreationDate="2018-08-22T17:11:46.393" Score="0" Body="&lt;p&gt;maybe you're having some problem with string interpolations. May you post the command you're trying to execute? If the command in Exec= is incorrect the launcher will not load the infos in myApp.desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One tip for testing if the command is actually working is using xlogo before anything else. The xlogo command opens a random window so we can have a graphical confirmation that it is indeed working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ex. &lt;code&gt;Exec=xlogo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are two apps that may be helpful with this and similar tasks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;App Editor&lt;/strong&gt;&lt;br&gt;&#xA;Edit application entries shown in application launcher menu and their properties.&lt;br&gt;&#xA;&lt;a href=&quot;http://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://appcenter.elementary.io/com.github.donadigo.appeditor/&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Alias&lt;/strong&gt;&lt;br&gt;&#xA;Simplify your commands: For example, you can create and organize a bunch of commands like the one that you're using now and just call it &lt;strong&gt;obs-config&lt;/strong&gt; and then you would use like this:&#xA;&lt;code&gt;Exec=obsconfig obs&lt;/code&gt;&lt;br&gt;&#xA;&lt;a href=&quot;http://appcenter.elementary.io/com.github.bartzaalberg.alias/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://appcenter.elementary.io/com.github.bartzaalberg.alias/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-22T17:11:46.393" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16122" PostTypeId="2" ParentId="15417" CreationDate="2018-08-22T19:50:28.757" Score="0" Body="&lt;p&gt;Long time ago I got similar results using &lt;a href=&quot;https://adam.merrifield.ca/2015/11/23/4-steps-to-replace-the-terminal-in-elementary-os-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Gnome-Terminal&lt;/strong&gt;&lt;/a&gt; + &lt;a href=&quot;https://ohmyz.sh/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Zsh&lt;/strong&gt;&lt;/a&gt; + &lt;a href=&quot;https://github.com/pascaldevink/spaceship-zsh-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Spaceship Zsh Theme&lt;/strong&gt;&lt;/a&gt;. The &quot;badge&quot; here is indicating the time and ruby/node environment versions. There's a lot of &lt;a href=&quot;https://github.com/robbyrussell/oh-my-zsh/wiki/Themes&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;zsh themes&lt;/strong&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/W8k7g.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course is not as straightforward as the iTerm, but you can play and find your own custom style.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ny6xZ.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ny6xZ.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the Gogh project as they share lots of Terminal Themes that you can use to create different profiles (light solarized, dark solarized etc.)&#xA;Gogh: &lt;a href=&quot;https://github.com/Mayccoll/Gogh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Mayccoll/Gogh&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-22T19:50:28.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16123" PostTypeId="2" ParentId="16091" CreationDate="2018-08-22T20:16:57.843" Score="1" Body="&lt;p&gt;for some reason did you run startx with administrator privileges? (sudo xstart).&#xA;if so, you must change the root .Xauthority owner to your user. you should probably do the same with .ICEauthority.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Ctrl+Alt+F1 and login into the shell, then run &quot;ls -lA&quot;. If you see the line:&#xA;-rw-------  1 &lt;strong&gt;root root&lt;/strong&gt;   58 Ago 22 17:10 .Xauthority&#xA; do chown yourusername:yourusername .Xauthority.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after that press Ctrl+Alt+F7 and login again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-08-22T20:16:57.843" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16124" PostTypeId="2" ParentId="16009" CreationDate="2018-08-22T21:12:13.980" Score="1" Body="&lt;p&gt;It is necessary to know more information about your system, but I will tell you what worked in my case:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;download the driver from the official website of amd. After that unzip and edit the files &lt;strong&gt;amdgpu-install&lt;/strong&gt; and &lt;strong&gt;amdgpu-pro-install&lt;/strong&gt;.&#xA;In line 90 change ubuntu by elementary and save the change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do not do that, it will say OS not supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on the version of the driver you will also need to edit the system file &lt;strong&gt;/ etc / os-release&lt;/strong&gt; on line 6 of VERSION_ID = &quot;0.4&quot; to VERSION_ID = &quot;16.04&quot; if you are using Eos loki (open &quot;files&quot; with administrator privileges for to be able to make the change).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that open the folder where the driver is with the terminal and put there:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;./amdgpu-pro-install -y&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(this installs Base kernel, Accelerated graphics, Multimedia table, Pro OpenGL, Pro Vulkan, Pro OpenCL).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing everything correctly edit the system file / etc / os-release again, on line 6 of VERSION_ID = &quot;16.04&quot; to VERSION_ID = &quot;0.4&quot; to leave that file as it was before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry bad english.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-08-22T21:12:13.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16128" PostTypeId="1" CreationDate="2018-08-23T11:11:20.677" Score="3" ViewCount="648" Body="&lt;p&gt;When I press &lt;code&gt;ctrl + shift + e&lt;/code&gt; something strange happens and I can't write nothing anymore for a few keystrokes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AKCp3.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AKCp3.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the gif above I press &lt;code&gt;ctrl + shift + e&lt;/code&gt; multiple times. You can see that the first letter is lower case and after upper case. Some strokes later everything is removed. After I try to remove the &lt;code&gt;e&lt;/code&gt; with &lt;code&gt;ctrl + z&lt;/code&gt; and the same thing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem affects all apps that I tried (scratch, vscode, chrome, terminal etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've looked in settings to see if is a shortcut for something, but didn't find id. I'm using juno beta release.&lt;/p&gt;&#xA;" OwnerUserId="9706" LastActivityDate="2023-04-05T05:07:30.897" Title="Strange behavior with ctrl + shift + e shortcut" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16129" PostTypeId="1" CreationDate="2018-08-23T12:01:38.583" Score="1" ViewCount="80" Body="&lt;p&gt;I've installed some third party apps like google chrome, valentina server, xampp, etc. that is installed via gdebi package installer or eddy. Well, it is installed successfully however, it doesnt show in slingshot. Can you guys help me with it? Pleaseeeee. Thankssss&lt;/p&gt;&#xA;" OwnerUserId="15436" LastActivityDate="2018-12-21T23:02:45.577" Title="Third party apps doesn't show on slingshot" Tags="|release-loki|thirdpartyapps|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16130" PostTypeId="2" ParentId="16129" CreationDate="2018-08-23T14:09:46.413" Score="1" Body="&lt;p&gt;I hate when my apps doesn't show up in the launcher too &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think AppEditor can solve your problems, it's a great app for editing our launcher/slingshot entries. Link: &lt;a href=&quot;http://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will try to show you a practical example, hope it can help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Goal: Create an icon to launch the Python Interpreter. As you can see I have no Python Interpreter in my Programming Section.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8cpEj.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8cpEj.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1.&lt;/strong&gt; Launch AppEditor.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rI12J.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rI12J.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As we can see there's no Python in Programming here as well:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yAdX3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yAdX3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2.&lt;/strong&gt; Activate -&gt; &lt;strong&gt;Show hidden entries&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/KMu9I.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KMu9I.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;Wow! Look who's here. Python it self! I will activate the 3.5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 3.&lt;/strong&gt; Activate -&gt; &lt;strong&gt;Show in Launcher&lt;/strong&gt;. &lt;em&gt;Don't forget to Save&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vZTsy.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vZTsy.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now let's check if it works.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/c76Et.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c76Et.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it! You can play and change the categories and even edit the myapp.desktop file directly. In most cases this will work, of course we'll find some exceptions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Manual alternative&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Somtimes the .desktop file exists already but there's something wrong in the configs, check if they already exist in your .desktop files directory with the command: &lt;code&gt;ls ~/.local/share/applications&lt;/code&gt; Check if there's a myapp.desktop already.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if not, you can create it yourself following the next steps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a .desktop file in &lt;code&gt;~/.local/share/applications/myapp.desktop&lt;/code&gt; (you can use AppEditor to create a new one and it will give the same result)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Manual Ex: &lt;code&gt;touch ~/.local/share/applications/chrome-browser.desktop&lt;/code&gt;&#xA;this example command would create a chrome-browser.desktop or you can use any text editor and just save there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The contents of the .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]  &#xA;Encoding=UTF-8  &#xA;Type=Application  &#xA;Name=Python(v3.5) #Application name, Chrome for example&#xA;Comment=Python Interpreter #This will show up on mouse hover &#xA;Icon=/usr/share/pixmaps/python3.5.xpm #icon full path or the application name ex. chrome  &#xA;Exec=/usr/bin/python3.5 #path to the program executable    &#xA;Categories=Development;  #the category it will show up&#xA;Terminal=false  &#xA;StartupNotify=true  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Example2&lt;/strong&gt;. My manually crated netbeans.desktop launcher, in &lt;code&gt;~/.local/share/applications/netbeans.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]  &#xA;Encoding=UTF-8  &#xA;Type=Application  &#xA;Name=Netbeans  &#xA;Icon=/home/felipe/Downloads/apps/netbeans/nb/netbeans.png  &#xA;Exec=/home/felipe/Downloads/apps/netbeans/bin/netbeans  &#xA;Comment=Netbeans IDE  &#xA;Categories=Development;  &#xA;Terminal=false  &#xA;StartupNotify=true  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The executable is located in my &lt;code&gt;Downloads/apps/netsbeans/bin&lt;/code&gt; directory&lt;/p&gt;&#xA;" OwnerUserId="4852" LastEditorUserId="4852" LastEditDate="2018-08-23T17:01:28.257" LastActivityDate="2018-08-23T17:01:28.257" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16131" PostTypeId="2" ParentId="16050" CreationDate="2018-08-23T14:36:21.713" Score="0" Body="&lt;p&gt;You could try qBittorrent instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kOdtx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kOdtx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15438" LastActivityDate="2018-08-23T14:36:21.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16132" PostTypeId="2" ParentId="15115" CreationDate="2018-08-23T14:55:54.770" Score="0" Body="&lt;p&gt;do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;host SERVERNAME&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(where servername is what you'd normally input in the server name field of the SMTP settings)&#xA;then use the IP it gives you for the server name box for SMTP settings.&lt;/p&gt;&#xA;" OwnerUserId="15438" LastActivityDate="2018-08-23T14:55:54.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16135" PostTypeId="2" ParentId="16102" CreationDate="2018-08-23T17:50:08.920" Score="0" Body="&lt;p&gt;I haven't tried Elementary on Apple hardware, but this sounds to me like there's probably a missing driver. Not sure in Juno if there's somewhere equivalent to Ubuntu's &quot;Additional Drivers&quot; in Software Sources? A little digging suggests that you can run &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; and that should do the same thing the Additional Drivers dialog does.&lt;/p&gt;&#xA;" OwnerUserId="15439" LastEditorUserId="15439" LastEditDate="2018-08-24T23:30:39.450" LastActivityDate="2018-08-24T23:30:39.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16136" PostTypeId="1" AcceptedAnswerId="16138" CreationDate="2018-08-23T20:03:41.730" Score="1" ViewCount="74" Body="&lt;p&gt;At startup, computer connects to network automatically. Can I also have computer start with vpn connected/connect as the next step automatically?&lt;/p&gt;&#xA;" OwnerUserId="14771" LastActivityDate="2018-08-23T21:00:58.500" Title="startup with vpn connected" Tags="|networking|startup|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16138" PostTypeId="2" ParentId="16136" CreationDate="2018-08-23T21:00:58.500" Score="0" Body="&lt;p&gt;I don't use a VPN but there's an option in the Wireless Connection Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to System Settings -&gt; Network -&gt; Wireless -&gt; Settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4O3lP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4O3lP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-23T21:00:58.500" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16141" PostTypeId="1" AcceptedAnswerId="16235" CreationDate="2018-08-24T02:39:17.860" Score="0" ViewCount="129" Body="&lt;p&gt;I'm using the latest 0.5 beta, on really new hardware (ryzen 5 2500U) and when I play videos with Videos (doesn't matter what file format/codec), the playback is all messed up. See: &lt;a href=&quot;https://youtu.be/JkpX3un7ZW4&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/JkpX3un7ZW4&lt;/a&gt;&#xA;I haven't used Linux as a desktop OS for the past 10 years, so I'm not sure which command output would be useful. Please let me know what I should include.&lt;/p&gt;&#xA;" OwnerUserId="15442" LastActivityDate="2018-09-09T04:35:03.033" Title="Funky playback with Videos" Tags="|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16143" PostTypeId="1" AcceptedAnswerId="16213" CreationDate="2018-08-24T13:21:35.703" Score="1" ViewCount="835" Body="&lt;p&gt;to Use Steam Play (&lt;a href=&quot;https://github.com/ValveSoftware/Proton&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ValveSoftware/Proton&lt;/a&gt;) with DX11 Games it is necessary to Upgrade Mesa to the latest Version. I Added the PPA noticed in the Prerequisites: &lt;a href=&quot;https://github.com/ValveSoftware/Proton/blob/proton_3.7/PREREQS.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ValveSoftware/Proton/blob/proton_3.7/PREREQS.md&lt;/a&gt;&#xA;But the latest version i get with this or other PPA is 18.0.5. Is there any PPA Available to use later Mesa Versions on Loki?&#xA;Or do you recommend to use Juno which is based on Bionic?&lt;/p&gt;&#xA;" OwnerUserId="15446" LastActivityDate="2018-09-08T20:08:19.310" Title="Mesa 18.1 and Newer on Loki" Tags="|release-loki|steam|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16145" PostTypeId="1" CreationDate="2018-08-24T16:01:29.613" Score="0" ViewCount="291" Body="&lt;p&gt;I am trying to make a Elementary OS app that I need to get user home folder. I tried &lt;code&gt;GLib.Environment.get_home_dir ()&lt;/code&gt; and &lt;code&gt;Granite.Services.Paths.home_folder.get_path ()&lt;/code&gt; but they both return &lt;code&gt;null&lt;/code&gt;. What is the proper way to get user's home folder for Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="15449" LastActivityDate="2024-02-19T18:03:45.460" Title="How to get user home folder in Vala?" Tags="|vala|home|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16146" PostTypeId="1" CreationDate="2018-08-24T16:22:30.187" Score="0" ViewCount="116" Body="&lt;p&gt;I just installed the latest version of Thunderbird by downloading the archive and following the instructions &lt;a href=&quot;https://support.mozilla.org/en-US/kb/installing-thunderbird-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I can open the program by running the script onside the extracted Thunderbird folder. However, it does not show up in my applications menu and the icon is a generic image rather than the Thunderbird logo (as shown in the screenshot). Is there any way to fix this yet?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running elementary OS 0.4.1 Loki, btw.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jiGsM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jiGsM.png&quot; alt=&quot;Screenshot of my dock:&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit: A workaround I found was using AppEditor (from the eOS AppCenter) to create an application icon for Thunderbird. This makes it function like it would normally, including working native notifications.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Credit to &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/99yurq/thunderbird_600_not_showing_in_applications_menu/e4redn9&quot; rel=&quot;nofollow noreferrer&quot;&gt;blureshadow&lt;/a&gt; on reddit!&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="15450" LastEditorUserId="308" LastEditDate="2019-12-19T19:42:05.657" LastActivityDate="2019-12-19T19:42:05.657" Title="Thunderbird 60.0 not showing in Applications Menu after installing tarball" Tags="|release-loki|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16147" PostTypeId="2" ParentId="16146" CreationDate="2018-08-24T17:42:20.257" Score="1" Body="&lt;p&gt;A workaround I found was using AppEditor (from the eOS AppCenter) to create an application icon for Thunderbird. This makes it function like it would normally, including working native notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Credit to &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/99yurq/thunderbird_600_not_showing_in_applications_menu/e4redn9&quot; rel=&quot;nofollow noreferrer&quot;&gt;blureshadow&lt;/a&gt; on reddit!&lt;/p&gt;&#xA;" OwnerUserId="15450" LastActivityDate="2018-08-24T17:42:20.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16148" PostTypeId="2" ParentId="15624" CreationDate="2018-08-24T19:17:04.707" Score="1" Body="&lt;p&gt;One option is to manual install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1.&lt;/strong&gt; Download from the official website: &lt;a href=&quot;https://www.mozilla.org/en-US/firefox/developer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.mozilla.org/en-US/firefox/developer/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got the &lt;strong&gt;firefox-62.0b20.tar.bz2&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2.&lt;/strong&gt; Uncompress the archive content somewhere, you can use &lt;code&gt;~/.opt/firefox&lt;/code&gt; or &lt;code&gt;Downloads/apps&lt;/code&gt; it's your call.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3.&lt;/strong&gt; inside the firefox directory there's a firefox file. Right-click -&gt; Permissions -&gt; Execute. Now you will be able to execute it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4.&lt;/strong&gt; Click (or double-click) the firefox file, it will start firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want it anymore or want to download a different version just delete the directory and repeat the process. You can create a Launcher shortcut though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WmMrz.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WmMrz.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-24T19:17:04.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16149" PostTypeId="1" CreationDate="2018-08-25T16:49:36.393" Score="0" ViewCount="3259" Body="&lt;p&gt;How to Enable Additional Driver in elementary Juno 5.0?&lt;/p&gt;&#xA;" OwnerUserId="15460" LastActivityDate="2024-03-28T06:08:16.020" Title="How to Enable Additional Driver in elementary juno?" Tags="|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16150" PostTypeId="1" CreationDate="2018-08-25T17:44:41.833" Score="0" ViewCount="472" Body="&lt;p&gt;How to install hp support assistant in elementary os Juno 5.0?&#xA;I wanna know how can I install hp support assistant from &lt;a href=&quot;http://www.kernel.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.kernel.org/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there's any other way to install?&lt;/p&gt;&#xA;" OwnerUserId="15460" LastActivityDate="2023-12-25T04:02:45.303" Title="How to install hp support assistant in elementary os Juno 5.0?" Tags="|drivers|hp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16151" PostTypeId="2" ParentId="13228" CreationDate="2018-08-25T21:19:30.987" Score="0" Body="&lt;p&gt;Yes, go to your account preferences and find a link called App passwords. Click on it, and create a new password profile (name it whatever you want). Google will then generate a new password to use with the app instead of your usual log in password. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="15463" LastActivityDate="2018-08-25T21:19:30.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16152" PostTypeId="2" ParentId="16149" CreationDate="2018-08-26T00:01:21.367" Score="0" Body="&lt;p&gt;Driver should be installed via appcentre. All the necessary required drivers are provided via appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If by additional you meant alternate driver. Then you could get it from website of manufacturer of hardware component. For example you could get an alternate (upstream) driver for Nvidia Graphics from Nvidia driver support website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise if by additional you meant extra driver, then you might not need it, if its not being shown in appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your are facing any issue with a particular hardware then you should directly search for its driver alternate.&lt;/p&gt;&#xA;" OwnerUserId="15464" LastActivityDate="2018-08-26T00:01:21.367" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16154" PostTypeId="2" ParentId="16113" CreationDate="2018-08-26T00:53:19.947" Score="0" Body="&lt;p&gt;Finally, I could manage the situation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a guy with the same problem and the solution was very simple, just had to do what the system was telling me to, when I tried to update via terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10926/app-centre-not-installing-updates&quot;&gt;App centre not installing updates&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command line to fix the problem was that: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13355" LastEditorUserId="138" LastEditDate="2018-10-08T15:00:15.883" LastActivityDate="2018-10-08T15:00:15.883" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16156" PostTypeId="1" AcceptedAnswerId="16169" CreationDate="2018-08-26T09:18:01.637" Score="0" ViewCount="547" Body="&lt;p&gt;I am trying to set the language of my Lenovo laptop to English while keeping my region and Formats set in German. It seems I can only keep the language set with the region of the native speaking country if that makes any sense, anyone know any ways around this?&lt;/p&gt;&#xA;" OwnerUserId="15466" LastActivityDate="2018-08-27T20:10:48.697" Title="Language and Region" Tags="|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16157" PostTypeId="2" ParentId="16150" CreationDate="2018-08-26T11:56:41.720" Score="0" Body="&lt;p&gt;the HP Support Assistant seems not to be available for Linux.&#xA;Check &lt;a href=&quot;https://www8.hp.com/de/de/campaigns/hpsupportassistant/hpsupport.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www8.hp.com/de/de/campaigns/hpsupportassistant/hpsupport.html&lt;/a&gt;&#xA;and also &lt;a href=&quot;https://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Support-assistant-for-linux/td-p/6718492&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://h30434.www3.hp.com/t5/Notebook-Software-and-How-To-Questions/Support-assistant-for-linux/td-p/6718492&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you need a special Driver for a Device like a Printer or a Bios Update? With BIOS Update there seems only the way to Install Windows and run it from there. Another Solution described here &lt;a href=&quot;https://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/How-do-I-update-the-BIOS-in-Linux/td-p/6498633&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/How-do-I-update-the-BIOS-in-Linux/td-p/6498633&lt;/a&gt; is to create a USB Bios Recovery Drive and Update it from there.&lt;/p&gt;&#xA;" OwnerUserId="15446" LastActivityDate="2018-08-26T11:56:41.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16159" PostTypeId="2" ParentId="16150" CreationDate="2018-08-26T14:52:17.697" Score="0" Body="&lt;p&gt;If you're after BIOS update, many HP laptops and desktops can do a flash update from the BIOS itself using DOS images located in a separate folder of the BIOS file. It is poorly documented but it works, you can even easily extract the required files from the Windows executable file.&#xA;Just copy the content of DOS folder on the USB stick and select it from the flash update menu of the BIOS.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-08-26T14:52:17.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16161" PostTypeId="1" CreationDate="2018-08-27T09:59:28.777" Score="0" ViewCount="361" Body="&lt;p&gt;Having been excited by the newest release of steam play by Valve I hurried and try it out on my eOS machine. &#xA;I installed Doom (2016) and noticed with great disappointment that it flickers in a way that it is playable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I read online that Steam Play need Nvidia drivers 39X.Xx, whereas on the Debian repository we have 386.xx. &#xA;Steam play is in Beta so this lag in drivers update is understandable but I was wondering if it is creating issues to you too&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-08-27T19:23:00.847" Title="Steam Play and Nvidia drivers" Tags="|graphic-drivers|nvidia|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16162" PostTypeId="1" CreationDate="2018-08-27T12:37:20.830" Score="1" ViewCount="4436" Body="&lt;p&gt;I have AMD Ryzen 2200g APU and people said that it was unstable before 4.15 update and 4.17 update kinda has all issues fixed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what is current kernel version installed on elementary os?&lt;/p&gt;&#xA;" OwnerUserId="15473" LastEditorUserId="14940" LastEditDate="2018-12-28T15:07:55.727" LastActivityDate="2018-12-28T17:35:49.763" Title="What is the current kernel version of elementary OS?" Tags="|system-installation|updates|kernel|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16163" PostTypeId="1" AcceptedAnswerId="16194" CreationDate="2018-08-27T15:13:12.993" Score="0" ViewCount="481" Body="&lt;p&gt;My laptop's WiFi card is rtl8723be. It keeps disconnecting even when the hotspot is two metres away. Please help :)&lt;/p&gt;&#xA;" OwnerUserId="15474" LastActivityDate="2018-09-01T07:08:06.040" Title="Wifi connection is weak (rtl8723be)" Tags="|release-loki|wifi|networking|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16164" PostTypeId="2" ParentId="15015" CreationDate="2018-08-27T15:55:42.630" Score="3" Body="&lt;p&gt;There's no need for any drivers, just press the top button once it's connected to the PC, and it sets itself as PC camera, Linux automatically recognizes it as an UVC device (iCatchtek SPCA6350).&lt;/p&gt;&#xA;" OwnerUserId="15475" LastActivityDate="2018-08-27T15:55:42.630" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16166" PostTypeId="2" ParentId="16161" CreationDate="2018-08-27T19:23:00.847" Score="1" Body="&lt;p&gt;You can grab the latest proprietary NVidia drivers from:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Egraphics-drivers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;To add the PPA you will need to install software-properties-common with:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt install software-properties-common&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&lt;p&gt;sudo apt update&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;For the latest (short lived) NVidia driver:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt install nvidia-396&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="15476" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-08-27T19:23:00.847" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16167" PostTypeId="1" CreationDate="2018-08-27T19:32:03.900" Score="0" ViewCount="597" Body="&lt;p&gt;I needed to update driver. &quot;I was looking for a GUI based alternative&quot;&lt;/p&gt;&#xA;" OwnerUserId="15460" LastActivityDate="2024-04-04T10:05:35.683" Title="How can i enable Canonical Partner in elementary Juno or Is there an application of a similar sort ?" Tags="|updates|graphic-drivers|drivers|appcenter|gui-toolkits|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16168" PostTypeId="2" ParentId="16162" CreationDate="2018-08-27T20:09:40.373" Score="2" Body="&lt;p&gt;Elementary OS 0.4.1 Loki currently uses:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.15.0-33-generic&lt;/p&gt;&#xA;" OwnerUserId="15476" LastActivityDate="2018-08-27T20:09:40.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16169" PostTypeId="2" ParentId="16156" CreationDate="2018-08-27T20:10:48.697" Score="0" Body="&lt;p&gt;I have the same setup you're looking for. This can be changed in the System Settings app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All Settings &gt; Personal &gt; Language &amp;amp; Region.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Language: English&lt;/li&gt;&#xA;&lt;li&gt;Region: United States&lt;/li&gt;&#xA;&lt;li&gt;Formats: Germany&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KPu0C.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KPu0C.png&quot; alt=&quot;My Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way I can have English language applications, a dvorak alternate keyboard layout and German date formats. Day of the week and month names are still German. To change that you'll need dconf-editor and you'll need to do some experimentation in system/locale.&lt;/p&gt;&#xA;" OwnerUserId="15477" LastActivityDate="2018-08-27T20:10:48.697" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16171" PostTypeId="2" ParentId="4799" CreationDate="2018-08-28T10:22:55.403" Score="0" Body="&lt;p&gt;you may need this G640S graphics tablet &lt;a href=&quot;https://www.xp-pen.com/goods/show/id/371.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.xp-pen.com/goods/show/id/371.html&lt;/a&gt;  ,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;XP-Pen Star G640S Graphics Drawing Pen Tablet with Battery-free Stylus and 6 Hot Keys , it works well with system linux/windows/Mac&lt;/p&gt;&#xA;" OwnerUserId="15485" LastActivityDate="2018-08-28T10:22:55.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16174" PostTypeId="1" CreationDate="2018-08-28T22:51:50.477" Score="1" ViewCount="508" Body="&lt;p&gt;Greetings ladies and gentlemen of this ElementaryOS forum.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll do my best to keep this brief and I apologize if this been asked already.  Believe me,  if the company (Lotus) didn't go out of business/vanish, I'd have lifetime support from them so I am not looking to waste anyone's time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As the title reads, I'd like to install Brave browser in Elementary operating system 0.3.2 Freya. For years I've unsuccessfully been able to find a way to do this and quite frankly, I am not even sure this can be done.  As this isn't available to download via &quot;app store&quot; or any reputable outlets I've found.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone has any suggestions, I'll certainly welcome them.  &lt;/p&gt;&#xA;" OwnerUserId="15489" LastActivityDate="2018-12-31T10:01:35.330" Title="How to install Brave browser on elementary OS 0.3.2 Freya" Tags="|release-freya|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16175" PostTypeId="2" ParentId="12902" CreationDate="2018-08-29T06:45:32.380" Score="0" Body="&lt;p&gt;The error is very similar to what happened to me. And solve it in the following way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had been installing and modifying Elementary and I also changed the password of my user and restarted, what happened was that my / home directory was encrypted and by changing the password, Elementary could not de-encrypt / home with the new password. The quickest solution was to put the old password and everything went back to normal.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;El error es muy parecido a lo que me ocurrio a mi. Y lo solucione de la siguiente forma:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Habia estado instalando y modificando Elementary y tambien cambie el password de mi usuario y reinicie, lo que ocurrio es que mi directorio /home estaba encriptado y al cambiar el password, Elementary no podia desincriptar /home con el nuevo password. La solucion mas rapida fue poner el antiguo password y todo volvio a la normalidad.&lt;/p&gt;&#xA;" OwnerUserId="15494" LastEditorUserId="26" LastEditDate="2018-11-30T16:27:17.823" LastActivityDate="2018-11-30T16:27:17.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16176" PostTypeId="2" ParentId="13433" CreationDate="2018-08-29T13:16:59.827" Score="1" Body="&lt;p&gt;Maybe you will like these options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Resizer - &lt;strong&gt;Quickly resize images from the context menu&lt;/strong&gt;&lt;br&gt;&#xA;A simple image resizer that resizes one or more images, usable from the context menu or as a standalone app.&lt;br&gt;&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.peteruithoven.resizer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.peteruithoven.resizer/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Image Optimizer - &lt;strong&gt;Simple lossless image compression&lt;/strong&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.gijsgoudzwaard.image-optimizer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.gijsgoudzwaard.image-optimizer/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4852" LastActivityDate="2018-08-29T13:16:59.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16178" PostTypeId="1" CreationDate="2018-08-29T20:10:29.523" Score="0" ViewCount="238" Body="&lt;p&gt;Using GRUB to dual boot between elementary OS and Windows 10. After using elementary and rebooting to Windows 10 the time is mysteriously 4 hours off. Just started happening a few months ago. So, every time I reboot to Windows 10 after using elementary I have to reset the time in Windows. Reboot to elementary after using Windows and the time doesn't change. Anyone else seeing this happen to them?&lt;/p&gt;&#xA;" OwnerUserId="15498" LastActivityDate="2018-12-12T05:02:10.417" Title="Reboot to Windows 10 changes time" Tags="|time|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16187" PostTypeId="2" ParentId="16167" CreationDate="2018-08-31T04:10:54.303" Score="0" Body="&lt;p&gt;You need to install &lt;code&gt;software-properties-common&lt;/code&gt; and &lt;code&gt;software-properties-gtk&lt;/code&gt; packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use this command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After installation is complete, you can just search for 'software and updates' in start menu.&lt;/p&gt;&#xA;" OwnerUserId="15515" LastActivityDate="2018-08-31T04:10:54.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16188" PostTypeId="2" ParentId="14341" CreationDate="2018-08-31T04:22:58.157" Score="0" Body="&lt;p&gt;Try this solution,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/X11/xorg.conf.d/20-intel_tearfree.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And paste this content inside,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;  Identifier  &quot;Intel Graphics&quot;&#xA;  Driver      &quot;intel&quot;&#xA;  Option      &quot;TripleBuffer&quot; &quot;true&quot;&#xA;  Option      &quot;TearFree&quot;     &quot;true&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot, should fix your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't solve it / you don't want to keep the changes,&#xA;just remove the file by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/share/X11/xorg.conf.d/20-intel_tearfree.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15515" LastActivityDate="2018-08-31T04:22:58.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16191" PostTypeId="2" ParentId="16174" CreationDate="2018-08-31T15:19:59.040" Score="0" Body="&lt;p&gt;I have no personal experience with Freya, but it seems that it should support &lt;a href=&quot;https://snapcraft.io/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Snap applications&quot;&gt;Snap applications&lt;/a&gt;, as it is based on Ubuntu 14.04. If this is wrong, someone should correct me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Brave via the Snapcraft store, do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install Snap support as per instructions for Ubuntu 14.04 here: &lt;a href=&quot;https://docs.snapcraft.io/core/install-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.snapcraft.io/core/install-ubuntu&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;a href=&quot;https://snapcraft.io/brave&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/brave&lt;/a&gt; and click &lt;em&gt;Install&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run the command mentioned in the &lt;em&gt;Install using the command line&lt;/em&gt; section in the operating system's terminal application.&lt;/li&gt;&#xA;&lt;li&gt;You may need to reboot the operating system for Brave to appear in the applications list. Future Snap applications should show up without requiring a reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-08-31T15:19:59.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16192" PostTypeId="2" ParentId="16178" CreationDate="2018-08-31T18:29:37.820" Score="0" Body="&lt;p&gt;check the windows time zone if it is matched with Linux location you set.&#xA;windows has this set time automatically feature .&#xA;and maybe your linux distro is setting the time based on location too&lt;/p&gt;&#xA;" OwnerUserId="15518" LastActivityDate="2018-08-31T18:29:37.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16193" PostTypeId="1" CreationDate="2018-09-01T01:28:51.880" Score="0" ViewCount="80" Body="&lt;p&gt;After installing (with no issues) EOS several weeks back, I was learning daily how to use it on a dual boot Windows 10 laptop.&lt;br&gt;&#xA; One night I was notified of low disk space, with something like 1 mb left. I tried to empty the trash and while I would hear the splash sound, the files wouldn't go away. I tried opening it as admin..same results.&lt;br&gt;&#xA;I figured I would try again the next day as I was tired. Trying to load EOS the next day, I got the &quot;e&quot; load screen for a few seconds, the it just went black. After researching for several days seeing if I could expand the partition from W10, thinking that would let me back in, I found it was impossible, so I then went about deleting said partition and trying to find ways to recover my data (which wasn't the end of the world if I couldn't as I had backups on usb) to no avail.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I gave up and thought, well why not try another linux. To date, have tried ubuntu 18.04 &amp;amp; 17.04 when that wouldn't work and past 2 days I have tried unsucessfully to install kubuntu latest version. I tried through netbootin all of them, then thought maybe that was the issue. Tried Rufus today with same results. After installing on dual boot, I am told I need to restart and clicking restart the message goes away, but it never reboots. So I manually do it and get the menu to select the linux distro, but it stalls at the splash screen and never loads.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't give you any info from terminal, obviously, as I could never get back into any of the installed products once I left setup. I already paid for elementary and thought why don't I just go back to it since I never had an issue installing and getting into it, only a learning curve on how to navigate. But I can't download it again without payment I guess. Can anyone help me get a version of linux that will actually install and run? I was so happy with my EOS side of things.&lt;/p&gt;&#xA;" OwnerUserId="15519" LastEditorUserId="3018" LastEditDate="2018-09-01T18:12:09.760" LastActivityDate="2024-04-04T20:07:00.833" Title="Broken elementary os after low disk space warning" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16194" PostTypeId="2" ParentId="16163" CreationDate="2018-09-01T07:08:06.040" Score="0" Body="&lt;p&gt;You can try to install these drivers: &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtlwifi_new/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the instructions are in the README of the project. Simply replace &lt;code&gt;&amp;lt;&amp;lt;YOUR WIRELESS DRIVER CODE&amp;gt;&amp;gt;&lt;/code&gt; by &lt;code&gt;rtl8723be&lt;/code&gt;. If it still doesn't work, try to edit the driver's options as explained in the README, and write:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;options rtl8723be ant_sel=0&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And reload it with the two &lt;code&gt;modprobe&lt;/code&gt; commands. You'll probably need to change this value between 0, 1 and 2 to find the best working antenna for your card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that these drivers need to be recompiled every time you install a newer version of the kernel.&lt;/p&gt;&#xA;" OwnerDisplayName="anon" LastActivityDate="2018-09-01T07:08:06.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16196" PostTypeId="2" ParentId="16193" CreationDate="2018-09-01T18:16:26.280" Score="0" Body="&lt;p&gt;I'm not sure what happened to your pc but if you don't mind loosing data then its better to reinstall elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can get elementary for free, you just need to write 0 on the pay-what-you-want box. Anyway &lt;a href=&quot;https://ams3.dl.elementary.io/download/MTUzNTgyNTU2MA==/elementaryos-0.4.1-stable.20180214.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; you have the direct link to download elementary OS Loki so that it's easier for you.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-01T18:16:26.280" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16197" PostTypeId="2" ParentId="15449" CreationDate="2018-09-01T18:35:52.197" Score="0" Body="&lt;p&gt;If you hold ctrl while pressing the secondary click over Plank you can open the Preferences menu, from which you can add some Docklets to Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't think there are more docklets available. But if you ask the Plank devs nicely, they might implement more docklets in future versions :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-01T18:35:52.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16199" PostTypeId="2" ParentId="15674" CreationDate="2018-09-02T17:43:20.803" Score="1" Body="&lt;p&gt;There is a project page for it on GitHub, but everything there is still on the to-do list. We would need some word from the project lead as to whether this will certainly be implemented, and if so, when can one expect it relative to Juno's release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/orgs/elementary/projects/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/orgs/elementary/projects/20&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-09-02T17:43:20.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16202" PostTypeId="1" AcceptedAnswerId="16210" CreationDate="2018-09-03T06:27:44.473" Score="0" ViewCount="51" Body="&lt;p&gt;I ask only because I don't have a spare SSD and don't want to dual-boot.  &lt;/p&gt;&#xA;" OwnerDisplayName="user15533" LastActivityDate="2018-09-04T18:54:57.057" Title="Other than speed (I'm assuming)- what am I losing if I install Elementary OS on HDD?" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16203" PostTypeId="2" ParentId="13499" CreationDate="2018-09-03T08:38:18.810" Score="1" Body="&lt;p&gt;This is likely a bug with the screenshot tool. There is a feature that obscures the onscreen text for screenshots by switching the font, taking the screenshot, and then switching the font back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The font obviously hasn't been switched back in this case and can be done manually with the following commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.interface font-name&#xA;gsettings reset org.gnome.desktop.interface monospace-font-name&#xA;gsettings reset org.gnome.desktop.interface document-font-name&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-09-03T08:38:18.810" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16204" PostTypeId="2" ParentId="14706" CreationDate="2018-09-03T08:39:44.070" Score="1" Body="&lt;p&gt;There is a feature that obscures the onscreen text for screenshots by switching the font, taking the screenshot, and then switching the font back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The font obviously hasn't been switched back in this case and can be done manually with the following commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.interface font-name&#xA;gsettings reset org.gnome.desktop.interface monospace-font-name&#xA;gsettings reset org.gnome.desktop.interface document-font-name&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-09-03T08:39:44.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16206" PostTypeId="2" ParentId="15700" CreationDate="2018-09-04T08:20:11.423" Score="1" Body="&lt;p&gt;From your post I'm not sure if you did this but give it a try anyway:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot into windows, make sure you can access that drive from Windows. Then press restart on the windows menu. It's important that you do it that way, do not force the restart. Let it install updates if it needs to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't install any update then just boot elementary when grub appears again after the restart. Otherwise boot into windows and press restart again, then choose elementary.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-04T08:20:11.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16207" PostTypeId="2" ParentId="15552" CreationDate="2018-09-04T11:12:47.523" Score="1" Body="&lt;p&gt;This problem eventually went away after updates to VirtualBox and Extensions.&lt;/p&gt;&#xA;" OwnerUserId="14141" LastActivityDate="2018-09-04T11:12:47.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16210" PostTypeId="2" ParentId="16202" CreationDate="2018-09-04T18:54:57.057" Score="0" Body="&lt;p&gt;Absolutely nothing. Even gaming changes mainly in loading times (of well optimized). &#xA;I would say apart from the starting and shutdown times you won't notice the difference&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-09-04T18:54:57.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16211" PostTypeId="1" CreationDate="2018-09-05T18:01:48.663" Score="1" ViewCount="72" Body="&lt;p&gt;I am moving to Elementary from a bespoke desktop on Arch, using i3. My workflow consists of having multiple windows per project, and separating the projects by workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use a ThinkPad T430s and a dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Elementary Juno beta, when I open some windows and separate them into different workspaces, they stay where they should, regardless of closing the laptop, sleeping/suspending, et cetera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I dock the laptop and close the lid, disabling the laptop LVDS screen, all my windows are moved to a single workspace on my external VGA monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not happen in reverse; making windows in workspaces while docked, then undocking and opening the laptop, I find all my windows where I left them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why does this happen, and how can I prevent it from happening?&lt;/p&gt;&#xA;" OwnerUserId="15337" LastActivityDate="2018-09-05T18:01:48.663" Title="How to retain workspace segregation across display changes?" Tags="|display|pantheon|gala|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16213" PostTypeId="2" ParentId="16143" CreationDate="2018-09-05T23:05:35.920" Score="0" Body="&lt;p&gt;I just went through this exact problem on elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe adding this PPA updated my mesa drivers: &#xA;&lt;a href=&quot;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe this ppa was the one that finally enabled me to updated my mesa drivers to the following version:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OpenGL version string: 4.5 (Compatibility Profile) Mesa 18.3.0-devel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which I can confirm has allowed me to install and run Doom 2016 without issues :D&lt;/p&gt;&#xA;" OwnerUserId="15536" LastEditorUserId="15536" LastEditDate="2018-09-08T20:08:19.310" LastActivityDate="2018-09-08T20:08:19.310" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16214" PostTypeId="2" ParentId="14625" CreationDate="2018-09-06T03:15:47.180" Score="2" Body="&lt;p&gt;As of now you can install &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt; from the AppCentre. Should work the same as alacarte but with elementary design.&lt;/p&gt;&#xA;" OwnerUserId="13725" LastActivityDate="2018-09-06T03:15:47.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16216" PostTypeId="2" ParentId="10704" CreationDate="2018-09-06T12:23:59.550" Score="3" Body="&lt;p&gt;It is possible to create a keyboard shortcut for this setting which seems to work for any window, including those without title bar menu. It's in &lt;strong&gt;System settings &gt; Keyboard &gt; Shortcuts &gt; Windows &gt; Toggle on all Workspaces&lt;/strong&gt; and it isn't assigned by default.&lt;/p&gt;&#xA;" OwnerUserId="15551" LastActivityDate="2018-09-06T12:23:59.550" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16218" PostTypeId="2" ParentId="7761" CreationDate="2018-09-06T23:06:55.647" Score="1" Body="&lt;p&gt;First remove what you've done with &lt;code&gt;sudo apt remove nvidia-current&lt;/code&gt;  and reboot.&#xA;Then open Appcenter, go to the Installed tab and install one Nvidia driver from the available ones. Then reboot and update your question with any issue that you might have encountered.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-06T23:06:55.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16220" PostTypeId="1" CreationDate="2018-09-07T08:03:01.073" Score="1" ViewCount="270" Body="&lt;p&gt;I noticed that some of my icons are randomly disappearing from plank. After a restart, some of my icons are not there. So I have to click again on 'keep in dock' option and it's fine for some time, but after few days it is gone. I think it only happens for applications installed with Snap (spotify, sublime text, slack,...). Any idea why and how to prevent it?&lt;/p&gt;&#xA;" OwnerUserId="15559" LastActivityDate="2018-09-07T08:03:01.073" Title="Icons are disappearing from Plank" Tags="|plank|icons|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16221" PostTypeId="2" ParentId="15899" CreationDate="2018-09-07T09:50:54.280" Score="2" Body="&lt;p&gt;In the &lt;a href=&quot;https://elementary.io/es/get-involved&quot; rel=&quot;nofollow noreferrer&quot;&gt;Get Involved&lt;/a&gt; section you have all the ways you can donate money to elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can donate periodically using Patreon, make one donation using paypal or you can also buy something from the elementary store.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's also another option, Bountysource. With this option you can donate money to solve a bug that's bothering you or to a elementary application that you really like :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-07T09:50:54.280" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16224" PostTypeId="1" CreationDate="2018-09-08T04:03:06.620" Score="0" ViewCount="4670" Body="&lt;p&gt;I am a new Linux user, I am using Elementary OS and not much familiar with its features. I want help with skype installation. I have downloaded the skype from official website, however, I dont know how to install it on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="15561" LastActivityDate="2019-01-06T17:00:34.417" Title="Skype Installation on Elementary OS" Tags="|skype|" AnswerCount="5" CommentCount="0" ClosedDate="2019-04-16T07:27:38.820" ContentLicense="CC BY-SA 4.0" />
  <row Id="16225" PostTypeId="2" ParentId="16224" CreationDate="2018-09-08T04:21:16.050" Score="0" Body="&lt;p&gt;have not tried this but it should work ... &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;download the &quot;DEB&quot; package for linux (remember where it is downloaded)&lt;/li&gt;&#xA;&lt;li&gt;You can install it by using sudo apt install ./name.deb&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;this assumes you are in terminal app in the directory where the file exists&#xA;or you could specify the full path name of the file&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2018-09-08T04:21:16.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16226" PostTypeId="1" CreationDate="2018-09-08T04:27:30.903" Score="1" ViewCount="56" Body="&lt;p&gt;I had windows 10 in my lenovo V110 laptop, Legacy BIOS.&#xA;Then I installed Loki alongside windows in another XFS drive. Now after installation, whenever I start my computer, windows 10 opens directly instead of OS choice prompt.&lt;/p&gt;&#xA;" OwnerUserId="15562" LastActivityDate="2018-09-14T13:22:21.933" Title="Dual boot redirecting to windows 10 instead or OS choice" Tags="|software-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16227" PostTypeId="2" ParentId="16224" CreationDate="2018-09-08T07:09:13.310" Score="0" Body="&lt;p&gt;George Barbaz is right, his answer should work just fine.&#xA;How ever, here is a maybe more detailed explanation, because you stated you are new to the linux world:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Open the files application and navigate to the folder, where the file you've downloaded is stored.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Right-click and click on 'Open in' ➝ 'Terminal'&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Type in the following command&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install -y ./nameofthefile.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; is the package manager used by ubuntu-based linux distributions like elementary, the &lt;code&gt;install&lt;/code&gt; keyword explains itself, I guess, and the &lt;code&gt;-y&lt;/code&gt; flag skips the confirmation dialog, you are normally prompted with and approves the actions taken directly. &lt;code&gt;.&lt;/code&gt; is a substitution of the current directory that you are in. &lt;code&gt;apt&lt;/code&gt; needs this to understand, that you want to install a local file and not one from a repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's pretty much everything sumed up, I guess. Makes it maybe a bit more understandable for you.&lt;/p&gt;&#xA;" OwnerUserId="15563" LastActivityDate="2018-09-08T07:09:13.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16228" PostTypeId="2" ParentId="16224" CreationDate="2018-09-08T08:18:44.237" Score="0" Body="&lt;p&gt;What other people have said is correct but I don't recommend you to install Skype on Linux.&lt;br&gt;&#xA;Microsoft decided to stop updating their Skype app for Linux so it may stop working in the future and it may have security issues that aren't being patched. However, you can use &lt;a href=&quot;https://web.skype.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;Skype on the web&lt;/a&gt; from any computer and browser. &lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-08T08:18:44.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16229" PostTypeId="2" ParentId="16224" CreationDate="2018-09-08T11:09:52.057" Score="0" Body="&lt;p&gt;You can find an application called &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; on the elementary OS AppCentre. When it's installed, you can either open the application and proceed as it instructs, or you can simply open Files, navigate to where the Skype installation file is located, click it and proceed with the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also find Skype as a &lt;a href=&quot;https://snapcraft.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snap&lt;/a&gt; and &lt;a href=&quot;https://flatpak.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatpak&lt;/a&gt; application.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-09-08T11:09:52.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16230" PostTypeId="1" CreationDate="2018-09-08T14:14:48.047" Score="2" ViewCount="877" Body="&lt;p&gt;From what I can see, this isn't available as part of the Juno beta, but is it expected in the final release?  Would be nice not to have to reinstall from scratch.&lt;/p&gt;&#xA;" OwnerUserId="13653" LastActivityDate="2018-11-07T17:00:31.170" Title="Will there be an update path from Loki to Juno?" Tags="|updates|release-juno|" AnswerCount="1" CommentCount="1" ClosedDate="2018-12-06T06:42:07.887" ContentLicense="CC BY-SA 4.0" />
  <row Id="16231" PostTypeId="2" ParentId="16230" CreationDate="2018-09-08T14:54:16.113" Score="0" Body="&lt;p&gt;Nope, there won't be. The devs said there's plans to add it on future releases but not right now.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-08T14:54:16.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16234" PostTypeId="1" CreationDate="2018-09-09T03:30:14.597" Score="1" ViewCount="1893" Body="&lt;p&gt;After a fresh install of elementary OS, I can't seem to update the operating system. After clicking the free button to update the system, error pops up saying There was an error installing Operating System updates&lt;br&gt;&#xA;Too few items to process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="15574" LastEditorUserId="16827" LastEditDate="2019-04-16T14:37:57.423" LastActivityDate="2019-04-16T20:30:49.257" Title="Cannot update operating system" Tags="|updates|system|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16235" PostTypeId="2" ParentId="16141" CreationDate="2018-09-09T04:35:03.033" Score="1" Body="&lt;p&gt;I had the same issue; after a lot of digging around, it turned out to be related to the the &lt;code&gt;gstreamer1.0-vaapi&lt;/code&gt; package. Removing that package fixed the issue for me.&lt;/p&gt;&#xA;" OwnerUserId="15575" LastActivityDate="2018-09-09T04:35:03.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16239" PostTypeId="1" AcceptedAnswerId="17676" CreationDate="2018-09-10T12:39:40.720" Score="4" ViewCount="68" Body="&lt;p&gt;I recently installed Elementary OS on my computer and for some reason Canadian English is not on the list of available keyboard layouts, which is weird since I can see Nigerian, Ghanaian, and Cameroonian English there. There's Canadian French, but no Canadian English. I'm currently using British English as it's closer than American English in spelling, but it's still not perfect. Any advice?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="15587" LastEditorUserId="84" LastEditDate="2021-07-27T21:16:09.987" LastActivityDate="2021-07-27T21:16:09.987" Title="Canadian English Keyboard Layout?" Tags="|keyboard-layout|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16241" PostTypeId="1" CreationDate="2018-09-10T23:21:53.560" Score="0" ViewCount="474" Body="&lt;p&gt;I made school boy when trying to follow the instructions for making a bootable SD card for ArchARM. I think I have either overwritten the boot folder on my primary partition with the ArchARM files or renamed the boot folder to &quot;mmcblk0p1&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since restarting I just get the grub rescue prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought I may be able to simply boot into a live instance of eOS and copy the boot folder from the USB to the hard disk of my laptop, but I am unsure if that will solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When booted into the live instance I can see my hard disk mounted as &quot;sda1&quot;. There is no longer a folder called boot on this drive, but there is now a folder called &quot;mmcblk0p1&quot; which appears to contain boot related files. &quot;mmcblk0p1&quot; was the partition label for the boot partition I was trying to create on the SD card I was making for my RPi using the instructions given for ArchARM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me recover my eOS install? I really don't want to reinstall if possible as I have had this particular install running for about two years and have it setup just the way I like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.s. I may have also overwritten the /root folder, but not sure until I can get past the boot error.&lt;/p&gt;&#xA;" OwnerUserId="569" LastActivityDate="2024-03-14T11:03:50.463" Title="How can I copy the /boot/ folder and it's contents from the live USB to sda1?" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16242" PostTypeId="1" CreationDate="2018-09-11T05:16:23.500" Score="0" ViewCount="224" Body="&lt;p&gt;So I was installing Loki in a Macbook 6.1 (late 2009). All was fine until the formating part. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It wasn't a system failure only my own dumbassery; in the HDD there was this backup partition that I didn't want to touch but at the choice part I tried the formating with the LMV option since it looked a lot more simple than the tradicional way of choicing manually, wich I always do, the thing here is that in the warning window they show you how is going to be your future new HDD's partition, I wasn't happy since it deleted everything so went backwards and choose the manual choice but to my dissmise all the partitions where gone. I stopped the install since I didn't want to touch the HDD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So,is there any hope to recover the partition or even some data using the    Elementary live DVD?    &lt;/p&gt;&#xA;" OwnerUserId="15592" LastEditorUserId="15592" LastEditDate="2018-09-11T05:43:09.200" LastActivityDate="2024-03-28T09:04:00.473" Title="Recover partition OR data" Tags="|disk-management|hdd|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16243" PostTypeId="2" ParentId="16234" CreationDate="2018-09-11T06:52:09.960" Score="0" Body="&lt;p&gt;Try opening the Terminal application, typing in the following line and pressing Enter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command updates your system much like clicking the &lt;em&gt;update all&lt;/em&gt; button in the AppCentre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it asks if you would like to update, it should be okay to answer &lt;em&gt;yes&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still get an error, it might give you some suggestions as to how to fix your system. At the very least, it should give you some additional information to continue troubleshooting.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-09-11T06:52:09.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16245" PostTypeId="2" ParentId="16241" CreationDate="2018-09-11T18:38:50.520" Score="0" Body="&lt;p&gt;In the unlikely event that somebody else encounters this specific scenario.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Create a bootable USB with eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Boot into a live instance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Choose &quot;Try Elementary&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) Open a terminal and navigate to media and the drive that contains your &quot;/&quot; directory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5) Use the command &quot;mv /&lt;em&gt;renamedbootfolder&lt;/em&gt; /boot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6) Shut down and restart&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first time I logged in after doing this non of the pantheon elemnts loaded. i restarted again and everything was back to normal.&lt;/p&gt;&#xA;" OwnerUserId="569" LastActivityDate="2018-09-11T18:38:50.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16246" PostTypeId="1" CreationDate="2018-09-12T13:24:51.123" Score="0" ViewCount="120" Body="&lt;pre&gt;&lt;code&gt;sudo apt-get install vlc&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet dependencies:&#xA; vlc : Depends: vlc-nox (= 2.2.2-5ubuntu0.16.04.4) but it is not going to be installed&#xA;       Depends: libfreerdp-client1.1 (&amp;gt;= 1.1.0~beta1+git20130629) but it is not going to be installed&#xA;       Depends: libfreerdp-core1.1 (&amp;gt;= 1.1.0~beta1+git20130629) but it is not going to be installed&#xA;       Depends: libfreerdp-gdi1.1 (&amp;gt;= 1.1.0~beta1+git20130629) but it is not going to be installed&#xA;       Depends: libgles2-mesa (&amp;gt;= 7.8.1) but it is not going to be installed or&#xA;                libgles2&#xA;       Depends: libqt5x11extras5 (&amp;gt;= 5.1.0) but it is not going to be installed&#xA;       Depends: libsdl-image1.2 (&amp;gt;= 1.2.10) but it is not going to be installed&#xA;       Depends: libsdl1.2debian (&amp;gt;= 1.2.11) but it is not going to be installed&#xA;       Depends: libva-drm1 (&amp;gt;= 1.1.0) but it is not going to be installed&#xA;       Depends: libva-x11-1 (&amp;gt;= 1.0.3) but it is not going to be installed&#xA;       Depends: libvlccore8 (&amp;gt;= 2.2.0) but it is not going to be installed&#xA;       Depends: libvncclient1 (&amp;gt;= 0.9.10) but it is not going to be installed&#xA;       Depends: libxcb-composite0 but it is not going to be installed&#xA;       Depends: libxcb-xv0 (&amp;gt;= 1.2) but it is not going to be installed&#xA;       Recommends: vlc-plugin-notify (= 2.2.2-5ubuntu0.16.04.4) but it is not going to be installed&#xA;       Recommends: vlc-plugin-samba (= 2.2.2-5ubuntu0.16.04.4) but it is not going to be installed&#xA;       Conflicts: vlc:i386 but 2.1.4-1 is to be installed&#xA; vlc:i386 : Depends: vlc-nox:i386 (= 2.1.4-1) but it is not going to be installed&#xA;            Depends: libaa1:i386 (&amp;gt;= 1.4p5) but it is not going to be installed&#xA;            Depends: libc6:i386 (&amp;gt;= 2.15) but it is not going to be installed&#xA;            Depends: libcaca0:i386 (&amp;gt;= 0.99.beta17-1) but it is not going to be installed&#xA;            Depends: libfreetype6:i386 (&amp;gt;= 2.2.1) but it is not going to be installed&#xA;            Depends: libfribidi0:i386 (&amp;gt;= 0.19.2) but it is not going to be installed&#xA;            Depends: libgcc1:i386 (&amp;gt;= 1:4.1.1) but it is not going to be installed&#xA;            Depends: libgl1-mesa-glx:i386 but it is not going to be installed or&#xA;                     libgl1:i386&#xA;            Depends: libqtcore4:i386 (&amp;gt;= 4:4.8.0) but it is not going to be installed&#xA;            Depends: libqtgui4:i386 (&amp;gt;= 4:4.8.0) but it is not going to be installed&#xA;            Depends: libsdl-image1.2:i386 (&amp;gt;= 1.2.10) but it is not going to be installed&#xA;            Depends: libsdl1.2debian:i386 (&amp;gt;= 1.2.11) but it is not going to be installed&#xA;            Depends: libstdc++6:i386 (&amp;gt;= 4.6) but it is not going to be installed&#xA;            Depends: libtar0:i386 but it is not going to be installed&#xA;            Depends: libva-x11-1:i386 (&amp;gt; 1.3.0~) but it is not going to be installed&#xA;            Depends: libva1:i386 (&amp;gt; 1.3.0~) but it is not going to be installed&#xA;            Depends: libvlccore7:i386 (&amp;gt;= 2.1.0) but it is not installable&#xA;            Depends: libx11-6:i386 but it is not going to be installed&#xA;            Depends: libxcb-composite0:i386 but it is not going to be installed&#xA;            Depends: libxcb-keysyms1:i386 (&amp;gt;= 0.3.9) but it is not going to be installed&#xA;            Depends: libxcb-randr0:i386 (&amp;gt;= 1.1) but it is not going to be installed&#xA;            Depends: libxcb-shm0:i386 but it is not going to be installed&#xA;            Depends: libxcb-xv0:i386 (&amp;gt;= 1.2) but it is not going to be installed&#xA;            Depends: libxcb1:i386 (&amp;gt;= 1.6) but it is not going to be installed&#xA;            Depends: libxext6:i386 but it is not going to be installed&#xA;            Depends: libxinerama1:i386 but it is not going to be installed&#xA;            Depends: libxpm4:i386 but it is not going to be installed&#xA;            Depends: zlib1g:i386 (&amp;gt;= 1:1.2.3.3) but it is not going to be installed&#xA;            Recommends: vlc-plugin-notify:i386 (= 2.1.4-1) but it is not going to be installed&#xA;            Recommends: vlc-plugin-pulse:i386 (= 2.1.4-1) but it is not installable&#xA;            Conflicts: vlc but 2.2.2-5ubuntu0.16.04.4 is to be installed&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15601" LastEditorUserId="12279" LastEditDate="2018-10-08T14:56:59.460" LastActivityDate="2023-12-12T20:03:25.390" Title="this error comes when i install qbitorrent and vlc" Tags="|software-installation|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16247" PostTypeId="1" CreationDate="2018-09-12T23:12:53.177" Score="1" ViewCount="2563" Body="&lt;p&gt;Just installed Elementary OS on mid-2009 MacBook Pro. During install, the installer displays and connects to my WiFi network, but after install it does not. In addition, no networks show up. There is something funky with the install process in that in connects and then does not connect upon completion.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in Advance.&lt;/p&gt;&#xA;" OwnerUserId="15603" LastActivityDate="2021-11-13T01:06:45.577" Title="No WiFi MacBook Pro after ElementaryOS install" Tags="|wifi|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16248" PostTypeId="2" ParentId="16178" CreationDate="2018-09-13T01:13:53.587" Score="1" Body="&lt;p&gt;As user &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3069/amphyby&quot;&gt;Amphyby&lt;/a&gt; commented, this is a known situation when you install a distro in dual boot configuration with Windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically what is happening is that Windows reads the computer time as local time, while elementary reads it as &lt;a href=&quot;https://en.wikipedia.org/wiki/Coordinated_Universal_Time&quot; rel=&quot;nofollow noreferrer&quot;&gt;UTC.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Easiest way to solve it is to just run this command in the terminal to set elementary to also read time as local:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;timedatectl set-local-rtc 1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="15319" LastActivityDate="2018-09-13T01:13:53.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16249" PostTypeId="1" AcceptedAnswerId="16252" CreationDate="2018-09-13T03:15:40.703" Score="1" ViewCount="294" Body="&lt;p&gt;I am attempting to use &lt;a href=&quot;https://github.com/webpro/reveal-md&quot; rel=&quot;nofollow noreferrer&quot;&gt;reveal-md&lt;/a&gt; to generate slide decks using markdown files. I followed the instructions to install reveal-md using npm &lt;code&gt;npm install -g reveal-md&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One of the optional dependencies is puppeteer, which is a library that interfaces with Chrome/Chromium API's, and allows the user to print a slide deck to PDF.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reveal-md was installed successfully, but I get this error for puppeteer in my terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR: Failed to download Chromium r549031! Set &#xA;&quot;PUPPETEER_SKIP_CHROMIUM_DOWNLOAD&quot; env variable to skip download.&#xA;{ Error: EACCES: permission denied, mkdir &#xA;'/usr/lib/node_modules/reveal-md/node_modules/puppeteer/.local-chromium'&#xA;  errno: -13,&#xA;  code: 'EACCES',&#xA;  syscall: 'mkdir',&#xA;  path: '/usr/lib/node_modules/reveal-md/node_modules/puppeteer/.local-chromium' }&#xA;npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.4 &#xA;(node_modules/reveal-md/node_modules/fsevents):&#xA;npm WARN notsup SKIPPING OPTIONAL DEPENDENCY: Unsupported platform for &#xA;fsevents@1.2.4: wanted {&quot;os&quot;:&quot;darwin&quot;,&quot;arch&quot;:&quot;any&quot;} (current: {&quot;os&quot;:&quot;linux&quot;,&quot;arch&quot;:&quot;x64&quot;})&#xA;npm WARN optional SKIPPING OPTIONAL DEPENDENCY: puppeteer@1.3.0 (node_modules/reveal-md/node_modules/puppeteer):&#xA;npm WARN optional SKIPPING OPTIONAL DEPENDENCY: puppeteer@1.3.0 install: `node install.js`&#xA;npm WARN optional SKIPPING OPTIONAL DEPENDENCY: Exit status 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I installed puppeteer manually via &lt;code&gt;npm install -g puppeteer&lt;/code&gt;, I get a similar error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ERROR: Failed to download Chromium r588429! Set &quot;PUPPETEER_SKIP_CHROMIUM_DOWNLOAD&quot; env variable to skip download.&#xA;{ Error: EACCES: permission denied, mkdir '/usr/lib/node_modules/puppeteer/.local-chromium'&#xA;  errno: -13,&#xA;  code: 'EACCES',&#xA;  syscall: 'mkdir',&#xA;  path: '/usr/lib/node_modules/puppeteer/.local-chromium' }&#xA;npm ERR! code ELIFECYCLE&#xA;npm ERR! errno 1&#xA;npm ERR! puppeteer@1.8.0 install: `node install.js`&#xA;npm ERR! Exit status 1&#xA;npm ERR! &#xA;npm ERR! Failed at the puppeteer@1.8.0 install script.&#xA;npm ERR! This is probably not a problem with npm. There is likely additional logging output above.&#xA;&#xA;npm ERR! A complete log of this run can be found in:&#xA;npm ERR!     /root/.npm/_logs/2018-09-13T00_07_56_867Z-debug.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I even tried promoting myself to the root user and attempting the install command, but I received the same error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did a web search for &quot;npm install puppeteer error,&quot; and I have seen several comments that this is probably an issue with npm permission. Is there a way I can fix this manually?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 9/14/18:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer by @rmmcneely, below, is correct to fix my specific error. As a more permanent solution, I followed &lt;a href=&quot;https://docs.npmjs.com/getting-started/fixing-npm-permissions&quot; rel=&quot;nofollow noreferrer&quot;&gt;npm's instructions&lt;/a&gt; for changing the global prefix, in the config file, to point to a location I created in my home folder &lt;code&gt;~/.npm-global&lt;/code&gt;, which solves any permission issues with global packages.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Option 2&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Back-up your computer before you start.&lt;/li&gt;&#xA;&lt;li&gt;Make a directory for global installations: &lt;code&gt;mkdir ~/.npm-global&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Configure npm to use the new directory path: &lt;code&gt;npm config set prefix '~/.npm-global'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open or create a &lt;code&gt;~/.profile&lt;/code&gt; file and add this line: &lt;code&gt;export PATH=~/.npm-global/bin:$PATH&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Back on the command line, update your system variables: &lt;code&gt;source ~/.profile&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Test: Download a package globally without using &lt;code&gt;sudo&lt;/code&gt;. &lt;code&gt;npm install -g jshint&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15604" LastEditorUserId="15604" LastEditDate="2018-09-14T15:43:32.133" LastActivityDate="2018-09-14T15:43:32.133" Title="Puppeteer on Elementary OS" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16252" PostTypeId="2" ParentId="16249" CreationDate="2018-09-13T18:10:58.130" Score="0" Body="&lt;p&gt;EACCES indicates a permission error generally, double check who owns your global node_modules folder in /usr/lib and try to either install with those permissions, or chown the dir. &lt;/p&gt;&#xA;" OwnerUserId="12338" LastActivityDate="2018-09-13T18:10:58.130" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16253" PostTypeId="1" AcceptedAnswerId="16263" CreationDate="2018-09-13T19:30:21.370" Score="1" ViewCount="103" Body="&lt;p&gt;As the title suggest i'm fairly new to Linux and i'm curious how it works with drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NVIDIA Graphics worked out for me after some research, but I don't know about the rest of the machine. Coming from Windows my mindset is installing all kinds of drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll post my hardware down below and hope someone can tell me if I'm missing drivers or that all is installed.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    cpu:                                                            &#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 2680 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 2784 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1253 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1346 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 2333 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1258 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1871 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 3296 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1266 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1250 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1442 MHz&#xA;                       Intel(R) Core(TM) i7-5820K CPU @ 3.30GHz, 1239 MHz&#xA;keyboard:&#xA;                       Logitech G710 Gaming Keyboard&#xA;mouse:&#xA;                       Logitech G3 (MX518) Optical Mouse&#xA;graphics card:&#xA;                       nVidia VGA compatible controller&#xA;sound:&#xA;                       nVidia Audio device&#xA;                       Intel C610/X99 series chipset HD Audio Controller&#xA;                       Blue Microphones Yeti Stereo Microphone&#xA;storage:&#xA;                       Intel C610/X99 series chipset sSATA Controller [AHCI mode]&#xA;                       Samsung Electronics Non-Volatile memory controller&#xA;network:&#xA;  ens4                 Intel Gigabit CT Desktop Adapter&#xA;network interface:&#xA;  ens4                 Ethernet network interface&#xA;  lo                   Loopback network interface&#xA;disk:&#xA;  /dev/sdb             SAMSUNG HD753LJ&#xA;  /dev/sdc             SAMSUNG HD103UJ&#xA;  /dev/sda             Crucial_CT512MX1&#xA;  /dev/nvme0n1         Samsung Electronics Disk&#xA;partition:&#xA;  /dev/sdb1            Partition&#xA;  /dev/sdc1            Partition&#xA;  /dev/sda1            Partition&#xA;  /dev/sda2            Partition&#xA;  /dev/nvme0n1p1       Partition&#xA;  /dev/nvme0n1p2       Partition&#xA;  /dev/nvme0n1p3       Partition&#xA;  /dev/nvme0n1p4       Partition&#xA;  /dev/nvme0n1p5       Partition&#xA;  /dev/nvme0n1p6       Partition&#xA;usb controller:&#xA;                       ASMedia ASM1042A USB 3.0 Host Controller&#xA;                       VIA VL805 USB 3.0 Host Controller&#xA;                       Intel C610/X99 series chipset USB Enhanced Host Controller #2&#xA;                       Intel C610/X99 series chipset USB Enhanced Host Controller #1&#xA;                       Intel C610/X99 series chipset USB xHCI Host Controller&#xA;bios:&#xA;                       BIOS&#xA;bridge:&#xA;                       Intel C610/X99 series chipset PCI Express Root Port #4&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DMI2&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1&#xA;                       Intel C610/X99 series chipset PCI Express Root Port #5&#xA;                       Intel C610/X99 series chipset PCI Express Root Port #1&#xA;                       Intel C610/X99 series chipset LPC Controller&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCI Express Root Port 1&#xA;                       Intel C610/X99 series chipset PCI Express Root Port #8&#xA;hub:&#xA;                       Linux Foundation 3.0 root hub&#xA;                       Intel Hub&#xA;                       VIA Hub&#xA;                       Linux Foundation 2.0 root hub&#xA;                       Linux Foundation 3.0 root hub&#xA;                       Linux Foundation 2.0 root hub&#xA;                       Linux Foundation 3.0 root hub&#xA;                       Linux Foundation 2.0 root hub&#xA;                       Intel Hub&#xA;                       Linux Foundation 2.0 root hub&#xA;                       Linux Foundation 2.0 root hub&#xA;memory:&#xA;                       Main Memory&#xA;unknown:&#xA;                       FPU&#xA;                       DMA controller&#xA;                       PIC&#xA;                       Keyboard controller&#xA;  /dev/lp0             Parallel controller&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Hot Plug&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal &amp;amp; RAS Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder &amp;amp; Broadcast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 &amp;amp; 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 ERROR Registers&#xA;                       Intel C610/X99 series chipset SMBus Controller&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad &amp;amp; Semaphore Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Target Address, Thermal &amp;amp; RAS Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 1 Thermal Control&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad &amp;amp; Semaphore Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Global Broadcast&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 ERROR Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 I/O APIC&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 &amp;amp; 1 Monitoring&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 2 Thermal Control&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 &amp;amp; 1&#xA;                       Intel C610/X99 series chipset SPSR&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 RAS, Control Status and Global Errors&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 &amp;amp; 1 Monitoring&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Target Address, Thermal &amp;amp; RAS Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder &amp;amp; Broadcast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 &amp;amp; 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 &amp;amp; 1&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Address Map, VTd_Misc, System Management&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 &amp;amp; 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 ERROR Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Scratchpad &amp;amp; Semaphore Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Power Control Unit&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Buffered Ring Agent&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 0 Thermal Control&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 0/1 Broadcast&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 ERROR Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Home Agent 0&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 1 Channel 0 Thermal Control&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 VCU&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO Channel 2/3 Broadcast&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel 3 Thermal Control&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 &amp;amp; 1&#xA;                       Yuan Yuan Enterprise Unclassified device&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 VCU&#xA;                       Intel C610/X99 series chipset MEI Controller #1&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 R3 QPI Link 0 &amp;amp; 1 Monitoring&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Integrated Memory Controller 0 Channel Target Address Decoder&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 PCIe Ring Interface&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 System Address Decoder &amp;amp; Broadcast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 2 &amp;amp; 3&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 Unicast Registers&#xA;                       Intel Xeon E7 v3/Xeon E5 v3/Core i7 DDRIO (VMSE) 0 &amp;amp; 1&#xA;                       Serial controller&#xA;                       Blue Microphones Yeti Stereo Microphone&#xA;                       Microsoft Controller&#xA;                       Logitech G710 Gaming Keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15610" LastEditorUserId="15610" LastEditDate="2018-09-13T19:56:17.290" LastActivityDate="2018-09-15T20:38:49.287" Title="Pretty new to Linux" Tags="|drivers|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16254" PostTypeId="1" CreationDate="2018-09-13T21:18:01.603" Score="0" ViewCount="111" Body="&lt;p&gt;I am trying to create a duel-boot Apple iMac, using Mac OS on the internal drive and Elementary on an external drive. I've gotten a bootable version on a USB thumb drive and explored the Live View, but when I look at the instructions for installing it for real, the instructions are very laking.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is going to be easy, and non-anxiety inducing, to do, the instructions should include screen captures of all the installation steps and/or some description of what choices you'll have for the installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no assurance that the installer will allow me to select any drive connected to the computer for installation (and avoid over-writing my internal drive.) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've gone through the process twice and each time I've stopped when it wasn't clear that my next click was not going to erase my internal drive. The warnings to have a back up of important information just make me more suspicious that I wouldn't be able to select an external disk for installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is all very simple and obvious to the developers, but not to the people who are curious to try LINUX and have no LINUX background. &lt;/p&gt;&#xA;" OwnerUserId="15611" LastActivityDate="2024-03-17T04:02:10.233" Title="completing the installation process" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16256" PostTypeId="2" ParentId="16254" CreationDate="2018-09-13T23:10:24.130" Score="0" Body="&lt;p&gt;When you begin to install, in the options at the beginning, make it a custom install and then direct the installer to the drive you want to install to. You can tick or right click the other drives before installing anything to indicate they must be left unchanged then the installer will ignore those drives. It says something like DO NOT USE THIS DRIVE.&#xA;Of course you must double check that they are marked as unchanged that is not to be used for installation before you go ahead. It will tell you when you are about to install or if changes you are about to make can't be reversed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before installing, in the live view open &quot;Disks&quot; and you will be able to see how your disks are named and their sizes etc. make it easier to tell the installer which you want to install to and which should be unchanged.&lt;/p&gt;&#xA;" OwnerUserId="15613" LastEditorUserId="15613" LastEditDate="2018-09-13T23:23:42.877" LastActivityDate="2018-09-13T23:23:42.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16257" PostTypeId="2" ParentId="16246" CreationDate="2018-09-14T13:09:26.377" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install -f&#xA;sudo dpkg --configure -a&#xA;sudo apt install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;these commands in sequence as desсribed should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.: Just checked on my eOS 0.4.1 - simply works.&lt;/p&gt;&#xA;" OwnerUserId="3069" LastActivityDate="2018-09-14T13:09:26.377" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16258" PostTypeId="2" ParentId="16226" CreationDate="2018-09-14T13:22:21.933" Score="1" Body="&lt;p&gt;Well, the simpliest way is using &lt;strong&gt;Boot-Repair&lt;/strong&gt; utility.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find the instructions on official &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;website&lt;/a&gt;.&#xA;There are several options such as preparing bootable stick with special image, or installing it on live session and using from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S.: be careful with &lt;em&gt;advanced options&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3069" LastActivityDate="2018-09-14T13:22:21.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16260" PostTypeId="2" ParentId="16246" CreationDate="2018-09-15T08:13:26.027" Score="0" Body="&lt;p&gt;Not really a solution but a workaround in case nothing else works:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also install VLC via &lt;a href=&quot;https://snapcraft.io/vlc&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snap Store&lt;/a&gt; and &lt;a href=&quot;https://flathub.org/apps/details/org.videolan.VLC&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt; and qBittorrent via &lt;a href=&quot;https://flathub.org/apps/details/org.qbittorrent.qBittorrent&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still, something seems to be seriously wrong with your system, so you should try to fix it instead of just ignoring it. Hopefully other people can help you find a solution for it.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-09-15T08:13:26.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16262" PostTypeId="2" ParentId="16253" CreationDate="2018-09-15T19:27:19.170" Score="0" Body="&lt;p&gt;I would do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install the Ubuntu Software Manager:&#xA;sudo apt install software-properties-gtk&lt;/li&gt;&#xA;&lt;li&gt;Open it: in the Applications menu, it appears as &quot;Software &amp;amp; Updates&quot; and go to the &quot;Additional Drivers&quot; tab.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you have any uninstalled drivers, they should show in there. But if you see any other drivers for NVidia, don't install them since you already have your NVidia card working.&lt;/p&gt;&#xA;" OwnerUserId="15597" LastActivityDate="2018-09-15T19:27:19.170" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16263" PostTypeId="2" ParentId="16253" CreationDate="2018-09-15T20:38:49.287" Score="0" Body="&lt;p&gt;Go to AppCenter and check the &quot;Installed&quot; tab. There you'll have every driver you need to install on the Drivers section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Linux already have most drivers inside the kernel so you get them by default. However sometimes you need to install some extra drivers.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-15T20:38:49.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16265" PostTypeId="2" ParentId="14470" CreationDate="2018-09-16T08:57:37.853" Score="1" Body="&lt;p&gt;I've found something interesting that may be related to your issue:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Baytrail complete freeze&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If you are using kernel &gt; 3.16 on Baytrail architecture and randomly&#xA;  encounter total system freezes, the following kernel option is a&#xA;  workaround until this &lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=109051&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt; is fixed in the linux kernel.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;intel_idle.max_cstate=1&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;This is originally an Intel CPU bug that can be triggered by certain&#xA;  c-state transitions. It can also happen with Linux kernel 3.16 or&#xA;  Windows, though apparently much more rarely. The kernel option will&#xA;  prevent the freeze by avoiding c-state transitions but will also&#xA;  increase power consumption.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To add that line as a kernel option you need to edit &lt;code&gt;/etc/default/grub&lt;/code&gt; and add it to the list of options inside &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot; &quot;&lt;/code&gt;. Then save that file and execute &lt;code&gt;sudo update-grub&lt;/code&gt; from terminal. Reboot and it should be fixed.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-16T08:57:37.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16267" PostTypeId="2" ParentId="15990" CreationDate="2018-09-16T14:42:37.313" Score="6" Body="&lt;pre&gt;&lt;code&gt;wget https://dl.pstmn.io/download/latest/linux64 -O postman.tar.gz&#xA;sudo tar -xzf postman.tar.gz -C /opt&#xA;rm postman.tar.gz&#xA;sudo ln -s /opt/Postman/Postman /usr/bin/postman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also get Postman to show up in the Unity Launcher:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cat &amp;gt; ~/.local/share/applications/postman.desktop &amp;lt;&amp;lt;EOL&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Name=Postman&#xA;Exec=postman&#xA;Icon=/opt/Postman/app/resources/app/assets/icon.png&#xA;Terminal=false&#xA;Type=Application&#xA;Categories=Development;&#xA;EOL&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you  can  download form snapcraft&#xA;just  type ur  terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install postman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15222" LastEditorUserId="14940" LastEditDate="2018-12-02T05:38:05.907" LastActivityDate="2018-12-02T05:38:05.907" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16268" PostTypeId="1" AcceptedAnswerId="16270" CreationDate="2018-09-16T18:53:00.060" Score="0" ViewCount="480" Body="&lt;p&gt;I have installed PIA using the installation script found on their website on top of the Elementary OS Juno Beta. The installation completes successfully, and I am able to enter my account information and setup/connect to the vpn as expected, but there is no icon in the tray (because of the Elementary OS design specifications). This means that I am unable to access the settings after the process is running (at least, as far as I can tell).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried the various solutions listed on Stack Exchange as well as around the web (although, appears that most are for Loki or earlier), and nothing has worked so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know of a workaround for this? I am fine with not having the tray icon (although some sort of indicator would be nice...), I really just need access to the vpn settings so that I can change region, disconnect/reconnect, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="15627" LastActivityDate="2018-09-17T04:29:57.350" Title="Trying to get tray icon to appear for PIA (Private Internet Access VPN) in Juno Beta" Tags="|vpn|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16269" PostTypeId="2" ParentId="4226" CreationDate="2018-09-17T04:19:16.927" Score="0" Body="&lt;p&gt;Install Trayer, a GTK2 tray application:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install trayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then add a command similar to this to your session:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trayer --expand false --SetDockType false --widthtype pixel --width 200 --align right --iconspacing 15&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As is typical:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trayer --help&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for parameter help.&lt;/p&gt;&#xA;" OwnerUserId="15631" LastActivityDate="2018-09-17T04:19:16.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16270" PostTypeId="2" ParentId="16268" CreationDate="2018-09-17T04:29:57.350" Score="0" Body="&lt;p&gt;There is a workaround and it works:&#xA;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-09-17T04:29:57.350" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16271" PostTypeId="1" AcceptedAnswerId="16273" CreationDate="2018-09-17T08:53:23.737" Score="1" ViewCount="194" Body="&lt;p&gt;I know elementary OS &lt;a href=&quot;https://medium.com/elementaryos/all-aboard-the-meson-future-hype-train-2b6c478b6b9e&quot; rel=&quot;nofollow noreferrer&quot;&gt;would like to move from cmake to meson&lt;/a&gt;, but cmake should still work: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;While CMake will continue to work, our official documentation and code examples will all be written around Meson, so it’s best to keep up.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I was trying to compile &lt;a href=&quot;https://github.com/bartzaalberg/snaptastic&quot; rel=&quot;nofollow noreferrer&quot;&gt;snaptastic&lt;/a&gt; on Juno. I installed &lt;code&gt;cmake&lt;/code&gt; and &lt;code&gt;elementary-sdk&lt;/code&gt; but I'm still getting the following error: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo cmake -DCMAKE_INSTALL_PREFIX=/usr ../&#xA;[sudo] password for peteruithoven:       &#xA;CMake Error at CMakeLists.txt:38 (find_package):&#xA;  By not providing &quot;FindVala.cmake&quot; in CMAKE_MODULE_PATH this project has&#xA;  asked CMake to find a package configuration file provided by &quot;Vala&quot;, but&#xA;  CMake did not find one.&#xA;&#xA;  Could not find a package configuration file provided by &quot;Vala&quot; with any of&#xA;  the following names:&#xA;&#xA;    ValaConfig.cmake&#xA;    vala-config.cmake&#xA;&#xA;  Add the installation prefix of &quot;Vala&quot; to CMAKE_PREFIX_PATH or set&#xA;  &quot;Vala_DIR&quot; to a directory containing one of the above files.  If &quot;Vala&quot;&#xA;  provides a separate development package or SDK, be sure it has been&#xA;  installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there anything else I should install? I feel like I'm missing something like the following package, but I'm not sure how to install it.&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/rilian-la-te/cmake-vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rilian-la-te/cmake-vala&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-09-17T23:07:47.923" Title="Using cmake on Juno" Tags="|vala|release-juno|cmake|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16273" PostTypeId="2" ParentId="16271" CreationDate="2018-09-17T23:07:47.923" Score="2" Body="&lt;p&gt;I'm still on Loki, but it seems like the required &lt;code&gt;FindVala.cmake&lt;/code&gt; file would come from &lt;code&gt;cmake-elementary&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg-query -L cmake-elementary&#xA;...&#xA;/usr/share/cmake-3.5/Modules/FindVala.cmake&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which is recommended by &lt;code&gt;elementary-sdk&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14361" LastActivityDate="2018-09-17T23:07:47.923" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16275" PostTypeId="2" ParentId="13374" CreationDate="2018-09-18T10:48:15.283" Score="0" Body="&lt;p&gt;I had similar issues: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10065/bluetooth-headphones-not-showing-up-as-sound-output-on-dell-xps-15&quot;&gt;Bluetooth headphones not showing up as sound output on Dell XPS 15&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to be fixed in the latest elementary OS Juno (based on Ubuntu Bionic 18.04). &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-09-18T10:48:15.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16276" PostTypeId="1" CreationDate="2018-09-18T12:30:12.623" Score="0" ViewCount="198" Body="&lt;p&gt;I've been trying to download the latest version of VLC which is 3.something (my elementary OS has vlc 2.1.6 rincewind).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I go to the Videolan download page or if I use Software Center they both revert to the old version of VLC which is no longer supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Do I have to use Terminal?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In which case is anybody able to tell me the exact commands to use as I have no idea whatsoever how to use the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help gratefully appreciated. When adding tags, the information said that Freya has been superseded by Loki.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Should I simply upgrade to Loki?&lt;/li&gt;&#xA;&lt;li&gt;Is Loki a better OS and does it update VLC, which Freya doesn't?&lt;/li&gt;&#xA;&lt;li&gt;Also, as a supplementary, does anyone know of a good idiot's guide to using the command line?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanx&lt;/p&gt;&#xA;" OwnerUserId="10508" LastEditorUserId="19360" LastEditDate="2019-12-15T03:12:39.037" LastActivityDate="2023-12-24T22:01:25.167" Title="Elementary OS 0.3.2 Freya 64-bit Ubuntu 14.04 downloading VLC" Tags="|release-freya|command-line|vlc|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16277" PostTypeId="2" ParentId="6847" CreationDate="2018-09-18T14:33:51.913" Score="0" Body="&lt;p&gt;&lt;strong&gt;To get autostart for your user it should be in your session.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Goto [System Settings] -- [Applications] -- [Startup] tab -- [+] (in bottom left corner) -- Type in a custom command: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trayer --edge bottom --transparent true --widthtype request --width 10 --expand true --align right --height 32&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15631" LastActivityDate="2018-09-18T14:33:51.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16280" PostTypeId="1" CreationDate="2018-09-19T11:46:33.750" Score="0" ViewCount="577" Body="&lt;p&gt;On a PC running windows, I installed a second hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since then I have removed windows and installed elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go into the file manager hard drive 1, with the OS on, is recognised and all is well. When I try to open hard drive 2, I receive the message  'permission denied'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I unlock the access to my second drive?&lt;/p&gt;&#xA;" OwnerUserId="11875" LastActivityDate="2019-04-23T12:42:43.500" Title="Permission to second hard drive? Denied!" Tags="|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16281" PostTypeId="1" CreationDate="2018-09-20T00:51:39.990" Score="1" ViewCount="1101" Body="&lt;p&gt;So I've tried the normal tricks, and everywhere I've looked I can't find how to enable &quot;desktop icons&quot; in 'JUNO', disabling and re-enabling it in tweaks has done nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice would be appreciated &lt;/p&gt;&#xA;" OwnerUserId="15656" LastActivityDate="2019-01-04T23:35:21.110" Title="Display Desktop Icons" Tags="|desktop|icons|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16282" PostTypeId="2" ParentId="16099" CreationDate="2018-09-20T00:57:21.410" Score="0" Body="&lt;p&gt;there is a few &quot;backdoors&quot; you could try, there is no direct path admittedly. try updating the repo's and doing a 'apt dist-upgrade' may yield some results, or may brick your system, one of them, I've not played around with it i just installed JUNO&lt;/p&gt;&#xA;" OwnerUserId="15656" LastActivityDate="2018-09-20T00:57:21.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16283" PostTypeId="2" ParentId="10854" CreationDate="2018-09-20T00:59:22.347" Score="1" Body="&lt;p&gt;Check under your BIOS to make sure you have no RAID settings or its set as IDE. this has caused me many hours of issues in the past &lt;/p&gt;&#xA;" OwnerUserId="15656" LastActivityDate="2018-09-20T00:59:22.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16284" PostTypeId="2" ParentId="16276" CreationDate="2018-09-20T01:02:09.620" Score="0" Body="&lt;p&gt;To make sure you have the latest version of VLC the commands you would use  are&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get update &#xA;&#xA;$ sudo apt-get upgrade &#xA;&#xA;$ sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will install the latest VLC that is in your repo's&lt;/p&gt;&#xA;" OwnerUserId="15656" LastEditorUserId="19360" LastEditDate="2019-12-15T03:12:49.183" LastActivityDate="2019-12-15T03:12:49.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16285" PostTypeId="1" CreationDate="2018-09-20T05:14:09.573" Score="3" ViewCount="1207" Body="&lt;p&gt;I use the app Workrave to help keep RSI at bay. However, the app has a higher sound volume than I'd like, while the rest of my system is just right for me. Is there a way I can lower its volume while keeping my system's volume as it is?&lt;/p&gt;&#xA;" OwnerUserId="15657" LastActivityDate="2019-12-14T16:47:53.443" Title="How can I lower the volume specific to a particular app?" Tags="|settings|applications|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16286" PostTypeId="2" ParentId="805" CreationDate="2018-09-20T07:51:29.023" Score="0" Body="&lt;p&gt;Check in your &lt;code&gt;/usr/share/icons&lt;/code&gt; if you have an icon for Spotify&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If it’s there then just open the Spotify’s .desktop file in a text editor &amp;amp; change the “Icon = some_name“  some_name with icon name in the /usr/share/icons.&lt;/li&gt;&#xA;&lt;li&gt;If it’s not there then just copy paste a Spotify icon there.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15658" LastEditorUserId="26" LastEditDate="2018-11-30T19:56:18.750" LastActivityDate="2018-11-30T19:56:18.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16287" PostTypeId="2" ParentId="16285" CreationDate="2018-09-20T12:09:55.727" Score="2" Body="&lt;p&gt;You can install pavucontrol :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install pavucontrol&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Playback tab you can choose the volume output for each audio stream.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3yVtm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3yVtm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="19360" LastEditDate="2019-12-14T16:47:53.443" LastActivityDate="2019-12-14T16:47:53.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16293" PostTypeId="2" ParentId="860" CreationDate="2018-09-21T09:25:52.120" Score="1" Body="&lt;p&gt;I've found a workaround to show multiple calendars&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/calendar/issues/16#issuecomment-423436392&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/issues/16#issuecomment-423436392&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15667" LastActivityDate="2018-09-21T09:25:52.120" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16294" PostTypeId="2" ParentId="7502" CreationDate="2018-09-21T15:15:58.950" Score="0" Body="&lt;p&gt;As an Ubuntu, and therefore Debian, variant it should be possible to upgrade elementary OS &lt;a href=&quot;https://debian-handbook.info/browse/stable/sect.dist-upgrade.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;The Debian Way&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately Ubuntu has also shirked their responsibility to use the one true Debian distribution upgrade method. They should &lt;em&gt;never&lt;/em&gt; have come up with their &quot;update manager&quot; method, it has only led to laziness and buggy upgrades.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you familiarize yourself with aptitude, the Debian method is sure to work. It isn't pretty--it may cause packages to be removed that you wish to keep and my leave behind obsolete packages--but it works, and there are solutions to both of those issues you can implement after upgrading.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The concept of having to erase your hard drive and install from scratch for every release of an operating system is a holdover form the Windows 95 era. Ordinary users should not be forced to suffer through this. I used the Debian method in Ubuntu for years; it taught me a lot about the apt package management system that I was grateful to learn and it kept me from having to lose any precious data for about a decade.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2018-09-21T15:15:58.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16295" PostTypeId="1" CreationDate="2018-09-22T01:29:09.603" Score="0" ViewCount="574" Body="&lt;p&gt;I don't have any sound, only dummy output which doesn't work, and following the Ubuntu guide for troubleshooting sound, I get stuck at loading the modules.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/SoundTroubleshooting&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/SoundTroubleshooting&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(This is the guide I'm trying to follow)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To preface this, I have had sound working before on fresh install and it seemed to stop working when I shut my laptop lid. And in my quest to fix the issue, I have updated to kernel 4.18.8 using &lt;code&gt;ukuu&lt;/code&gt; which appears to work fine other than the sound still not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, when I get to step 4 of the guide, I get no soundcard found.&#xA;Then, when I go to check if the modules are installed (step 5 of the guide), I get a normal result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, using &lt;code&gt;alsa&lt;/code&gt; info to give me an output, it appears to not have any &#xA;modules actually loaded.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.alsa-project.org/db/?f=d1320e6df212a41f4dccda8b33ff5fe13c4adc86&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.alsa-project.org/db/?f=d1320e6df212a41f4dccda8b33ff5fe13c4adc86&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is the output of &lt;code&gt;alsainfo&lt;/code&gt; as suggested by a number of forums for sound troubles. via this link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Audio/AlsaInfo&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Audio/AlsaInfo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Strangely, to add to this, I tried &lt;code&gt;sudo alsa force-reload&lt;/code&gt;&#xA;and I do actually get an output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unloading ALSA sound driver modules: snd-soc-skl snd-soc-skl-ipc snd-soc-sst-ipc snd-soc-sst-dsp snd-hda-ext-core snd-soc-acpi snd-soc-core snd-compress snd-pcm-dmaengine snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer.&#xA;Loading ALSA sound driver modules: snd-soc-skl snd-soc-skl-ipc snd-soc-sst-ipc snd-soc-sst-dsp snd-hda-ext-core snd-soc-acpi snd-soc-core snd-compress snd-pcm-dmaengine snd-hda-codec snd-hda-core snd-hwdep snd-pcm snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-rawmidi snd-seq snd-seq-device snd-timer.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which is strange, because if there are no modules loaded, what is it unloading and loading...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Maybe that's just me being a noob, but that seems odd).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would greatly appreciate help.&lt;/p&gt;&#xA;" OwnerUserId="15669" LastEditorUserId="14940" LastEditDate="2018-12-05T23:46:44.100" LastActivityDate="2021-04-14T20:58:43.530" Title="Sound problems in Loki (dummy output) alsa not loading modules" Tags="|release-loki|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16296" PostTypeId="1" CreationDate="2018-09-22T11:20:16.457" Score="1" ViewCount="671" Body="&lt;p&gt;I downloaded the elementary OS distribution and tried to install that on VirtualBox, Wi-Fi doesn't work, I read the information on previous questions, but the problem hasn't solved yet. So I should to find another distribution for my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a Lenovo IdeaPad 320-15ast (80xv00wvru).&lt;/p&gt;&#xA;" OwnerUserId="15564" LastEditorUserId="308" LastEditDate="2019-12-19T19:33:10.127" LastActivityDate="2024-01-30T01:08:16.033" Title="My Lenovo laptop doesn't support elementary OS" Tags="|release-loki|lenovo|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16297" PostTypeId="1" CreationDate="2018-09-22T12:38:19.720" Score="0" ViewCount="102" Body="&lt;p&gt;I'm pretty sure if I shrink my HDD to leave some unallocated free space and then try to install ElementaryOS alongside my W10, it will just use that free space, and create everything it needs from there on it's own, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just wan't some extra peace of mind :)&lt;/p&gt;&#xA;" OwnerUserId="15671" LastActivityDate="2024-03-25T02:07:30.910" Title="Quick info (for peace of mind)" Tags="|release-loki|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16298" PostTypeId="2" ParentId="16297" CreationDate="2018-09-22T13:42:58.013" Score="0" Body="&lt;p&gt;I usually leave some unallocated space and then boot the installation usb. In there there's an option to manually edit the partitions and such so I just create a new ext4 partition and set it to / (which is the root directory). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have less than 8gb of ram then it's a good practice to leave 4gb or so to create a swap partition. You can do it at the same time you create your root partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't want to mess with this, there's an option called &quot;install elementary alongside of windows&quot; that should do the same. However in the past I had issues with it so i'm not sure if it works now.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-22T13:42:58.013" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16301" PostTypeId="1" CreationDate="2018-09-23T02:10:13.503" Score="0" ViewCount="926" Body="&lt;p&gt;Anybody knows if there are any plans or third party initiative to allow some level of customization to Juno?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In particular I have a small display so I always try to maximize the usable screen. In gnome I use extensions such as &lt;a href=&quot;https://extensions.gnome.org/extension/723/pixel-saver/&quot; rel=&quot;nofollow noreferrer&quot;&gt;pixel saver&lt;/a&gt; and &lt;a href=&quot;https://extensions.gnome.org/extension/545/hide-top-bar/&quot; rel=&quot;nofollow noreferrer&quot;&gt;hide top bar&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that eos developers are reluctant to let user mess with the default user experience, but I was wondering if, nevertheless, such a customization will be possible with Juno?&lt;/p&gt;&#xA;" OwnerUserId="244" LastActivityDate="2018-11-14T08:02:35.450" Title="Customization tools for juno" Tags="|display|settings|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16302" PostTypeId="2" ParentId="9672" CreationDate="2018-09-23T02:31:49.300" Score="1" Body="&lt;p&gt;My computer is a Dell Inspiron 5578 2in1, with Windows 10 and Loki, and it works ok as a tablet. I don't have auto rotation, but solved it with ScreenRotator. OnBoard works lovely, as an on-screen keyboard, too.&lt;/p&gt;&#xA;" OwnerUserId="8810" LastActivityDate="2018-09-23T02:31:49.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16305" PostTypeId="2" ParentId="16014" CreationDate="2018-09-23T13:27:40.200" Score="2" Body="&lt;p&gt;Look at this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8153/ctrl-shift-key-when-using-ctrlshift-to-switch-keyboard-layout&quot;&gt;CTRL + SHIFT + key when using CTRL+SHIFT to switch keyboard layout&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, and at this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1245473&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/gnome-settings-daemon/+bug/1245473&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Workaround is to change Layout switch to &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; or something...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also there is another workaround for Ubuntu on the bottom of the page&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1683383&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1683383&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, but it doesn't works with eOS Juno beta 2.&lt;/p&gt;&#xA;" OwnerUserId="6566" LastEditorUserId="14940" LastEditDate="2018-12-05T23:46:31.680" LastActivityDate="2018-12-05T23:46:31.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16308" PostTypeId="2" ParentId="11131" CreationDate="2018-09-24T09:44:50.280" Score="1" Body="&lt;p&gt;Try to use the Autoinstall command in Terminal. This should work in every ubuntu and debian distro variants&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also try to update your Kernel and make sure that your OS is the latest. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt upgrade &amp;amp;&amp;amp;&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9455" LastEditorUserId="26" LastEditDate="2019-01-02T23:03:56.980" LastActivityDate="2019-01-02T23:03:56.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16310" PostTypeId="2" ParentId="16295" CreationDate="2018-09-24T16:10:53.930" Score="0" Body="&lt;p&gt;If sound works after &lt;code&gt;sudo alsa force-reload&lt;/code&gt;&lt;br&gt;&#xA;use &lt;code&gt;alsa-info.sh&lt;/code&gt; again to see working configuration&lt;/p&gt;&#xA;&lt;p&gt;If modprobe options for snd_hda_intel are changed from:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;snd_hda_intel: probe_mask index=1&lt;/p&gt;&#xA;&lt;p&gt;snd_hda_intel: model=auto&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;You may be able to apply those changes in /etc/modprobe.d/alsa-base.conf&lt;/p&gt;&#xA;&lt;p&gt;If ALSA can identify the correct audio codec, may be an appropriate model option listed &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/tree/Documentation/sound/hd-audio/models.rst&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15685" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-09-24T16:10:53.930" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16311" PostTypeId="2" ParentId="16296" CreationDate="2018-09-25T01:35:53.483" Score="0" Body="&lt;p&gt;you won't be able to use wi-fi inside of virtual box, your best bet is to make a live CD/usb and try that.&lt;/p&gt;&#xA;" OwnerUserId="15656" LastActivityDate="2018-09-25T01:35:53.483" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16312" PostTypeId="2" ParentId="16280" CreationDate="2018-09-25T01:42:04.380" Score="1" Body="&lt;p&gt;you will need to mount the drive, elementary os does not auto mount drives like windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;to mount the drive try &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -o ro /dev/sdb(assumptive it's sdb) /home/[YOUR USER]/desktop &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will mount it to your desktop folder that in elementary seems to be empty 90% of the time&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then &lt;code&gt;cd ~/desktop &amp;amp; ls&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this should work assuming this drive is in good health and not damaged in any way &lt;/p&gt;&#xA;" OwnerUserId="15656" LastEditorUserId="16827" LastEditDate="2019-04-23T12:42:43.500" LastActivityDate="2019-04-23T12:42:43.500" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16313" PostTypeId="2" ParentId="16242" CreationDate="2018-09-25T01:50:45.030" Score="0" Body="&lt;p&gt;yes there is, you can use several tools, depending if this is your only machine, I used to have this question in my job all the time. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suggest make a live CD of something such as elementary (I use gparted for it personally) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and use a tool called &quot;testdisk&quot; or &quot;photorec&quot; both have uses. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;try to use testdisk as it can recover the whole partition. or individual files dependant on damage.&lt;/p&gt;&#xA;" OwnerUserId="15656" LastActivityDate="2018-09-25T01:50:45.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16316" PostTypeId="1" CreationDate="2018-09-25T16:58:10.367" Score="0" ViewCount="598" Body="&lt;p&gt;I have a problem, my elementary OS Juno, it has the top bar and the very large dock icons. The screen resolution  has the standard size of my notebook. See my pictures:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gKMdj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gKMdj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But my resolution have &lt;strong&gt;1366 x 768&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TOLww.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TOLww.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me ? Before everything was normal, I turned on the computer and it appeared like this today.&lt;/p&gt;&#xA;" OwnerUserId="15689" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:25.697" LastActivityDate="2019-05-08T10:04:25.697" Title="Top Bar and Dock Icons very large" Tags="|release-juno|display|plank|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16317" PostTypeId="2" ParentId="8095" CreationDate="2018-09-26T05:19:23.993" Score="0" Body="&lt;p&gt;I'm &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/93&quot; rel=&quot;nofollow noreferrer&quot;&gt;working on this&lt;/a&gt; for Juno+; unfortunately building &lt;a href=&quot;https://github.com/quequotion/wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;this fork&lt;/a&gt; requires a newer version of gtk3 (3.22 or higher) than the one shipped with Loki.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastEditorUserId="6206" LastEditDate="2020-06-17T00:12:56.700" LastActivityDate="2020-06-17T00:12:56.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16318" PostTypeId="2" ParentId="916" CreationDate="2018-09-26T05:28:02.910" Score="1" Body="&lt;p&gt;I ported the above code from launchpad to a new &lt;a href=&quot;https://github.com/quequotion/wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;git branch&lt;/a&gt; for Juno+; this version of wingpanel requires gtk3 version 3.22 or higher!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to get this code adopted upstream, but it's a &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/93&quot; rel=&quot;nofollow noreferrer&quot;&gt;tough sell&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2018-09-26T05:28:02.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16319" PostTypeId="2" ParentId="15234" CreationDate="2018-09-26T05:43:54.247" Score="0" Body="&lt;p&gt;In my case, i install ubuntu-make following ppa instructions:&#xA;&lt;a href=&quot;https://github.com/ubuntu/ubuntu-make&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ubuntu/ubuntu-make&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could solve my issue by run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and comment ( put a hastag (#)) before this line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;deb cdrom:[elementary OS 0.4.1 &lt;em&gt;Loki&lt;/em&gt; - Stable amd64 (20180214)]/&#xA;  xenial contrib main non-free&quot;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;later save.&lt;/p&gt;&#xA;" OwnerUserId="13661" LastActivityDate="2018-09-26T05:43:54.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16322" PostTypeId="2" ParentId="16128" CreationDate="2018-09-26T13:08:43.100" Score="1" Body="&lt;p&gt;I guess I found solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;export GTK_IM_MODULE=&quot;gtk-im-context-simple&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then run vscode (or another app) from the same shell.&#xA;If that doesnt work try this:&#xA;&lt;code&gt;export GTK_IM_MODULE=&quot;xim&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for me second variant works well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To save this for all application put line into /etc/environment, or per-user in ~/.gnomerc.&#xA;(The export command doesn't go in those files, just a new line with &lt;code&gt;GTK_IM_MODULE=&quot;xim&quot;&lt;/code&gt; or &lt;code&gt;GTK_IM_MODULE=&quot;gtk-im-context-simple&quot;&lt;/code&gt;.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Original: &lt;a href=&quot;https://superuser.com/a/1334194&quot;&gt;https://superuser.com/a/1334194&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6566" LastActivityDate="2018-09-26T13:08:43.100" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16323" PostTypeId="2" ParentId="8123" CreationDate="2018-09-26T18:28:25.847" Score="0" Body="&lt;p&gt;Try &lt;strong&gt;scrolling your window down&lt;/strong&gt;.... that was my problem!  Look on the right side of screen to see if you have a scroll bar.&lt;/p&gt;&#xA;" OwnerUserId="15697" LastActivityDate="2018-09-26T18:28:25.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16324" PostTypeId="1" CreationDate="2018-09-26T20:29:46.937" Score="0" ViewCount="49" Body="&lt;p&gt;I have a HP6700 wireless network printer and want to connect my elementary laptop using the wireless connection but have not found a way to do this.  Does anyone have any advice?&lt;/p&gt;&#xA;" OwnerUserId="15698" LastActivityDate="2018-12-13T06:03:19.393" Title="How to connect HP6700 wireless printer to Elementary Loki" Tags="|networking|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16325" PostTypeId="1" CreationDate="2018-09-26T21:23:58.640" Score="0" ViewCount="605" Body="&lt;p&gt;Hi guys Im installing slack but is sending an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;surface@surface:~/Downloads$ sudo dpkg -i slack-desktop-3.3.1-amd64.deb&#xA;(Reading database ... 203164 files and directories currently installed.)&#xA;Preparing to unpack slack-desktop-3.3.1-amd64.deb ...&#xA;Unpacking slack-desktop (3.3.1) over (3.3.1) ...&#xA;dpkg: dependency problems prevent configuration of slack-desktop:&#xA; slack-desktop depends on gconf2; however:&#xA;  Package gconf2 is not installed.&#xA; slack-desktop depends on gconf-service; however:&#xA;  Package gconf-service is not installed.&#xA; slack-desktop depends on libappindicator1; however:&#xA;  Package libappindicator1 is not installed.&#xA;&#xA;dpkg: error processing package slack-desktop (--install):&#xA; dependency problems - leaving unconfigured&#xA;Processing triggers for desktop-file-utils (0.22-1ubuntu5.2+elementary2~ubuntu0.4.1.1) ...&#xA;Processing triggers for bamfdaemon (0.5.3~bzr0+16.04.20180209-0ubuntu1) ...&#xA;Rebuilding /usr/share/applications/bamf-2.index...&#xA;Processing triggers for gnome-menus (3.13.3-6ubuntu3.1) ...&#xA;Processing triggers for mime-support (3.59ubuntu1) ...&#xA;Errors were encountered while processing:&#xA; slack-desktop&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tryed to install the missin libraries but is not possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found some giudes and each is based on older verson of slack, I have 2 questions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.- this error has fox?&#xA;2.- do you have an old version of slack to try install it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks &lt;/p&gt;&#xA;" OwnerUserId="15699" LastActivityDate="2019-05-04T03:03:10.647" Title="Installation Slack 3.3.1" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16328" PostTypeId="1" CreationDate="2018-09-27T10:27:50.493" Score="0" ViewCount="108" Body="&lt;p&gt;On the laptop of my parents OS Freya 0.3.1 is established. I live in other city, but I can be connected to them through AnyDesk therefore I have downloaded him Elementary OS 0.4.1. Tell please how to update OS Freya 0.3.1 to Elementary OS 0.4.1 without having physical access to the laptop but only through remote access of AnyDesk&lt;/p&gt;&#xA;" OwnerDisplayName="user15704" LastActivityDate="2018-12-28T14:02:05.527" Title="update OS Freya 0.3.1 to Elementary OS 0.4.1" Tags="|release-freya|updates|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-27T10:19:46.380" ContentLicense="CC BY-SA 4.0" />
  <row Id="16329" PostTypeId="2" ParentId="16328" CreationDate="2018-09-27T10:39:02.133" Score="0" Body="&lt;p&gt;You can't. Since you need to install the new OS from a bootlable usb. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to wait a while until Juno is released and then install Juno instead of Loki. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I imagine you could try is to create the bootable usb from your parents laptop and then guide them trough the installation by the phone or videoconference.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-09-27T10:39:02.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16331" PostTypeId="1" CreationDate="2018-09-27T11:51:52.553" Score="1" ViewCount="93" Body="&lt;p&gt;Today the mail app has a strange behavior. The window was getting bigger and bigger in width. I'm sending a print screen. I have already reboot my computer and also reinstalled the mail and still happening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time that I open it, it gets wider.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4yvSv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4yvSv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks&lt;/p&gt;&#xA;" OwnerUserId="963" LastActivityDate="2018-11-29T13:03:20.597" Title="Mail is getting automatically bigger and bigger" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16332" PostTypeId="1" CreationDate="2018-09-27T21:59:10.683" Score="1" ViewCount="409" Body="&lt;p&gt;I test Elementary OS 5.0 (Juno). When I use Firefox and select some text press right button I get strange behavior. I do not see the menu but I see the Inspect tool from Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is this normal and is there a settings for that to change to the normal menu?&lt;/p&gt;&#xA;" OwnerUserId="15708" LastActivityDate="2018-10-26T21:21:38.777" Title="Firefox right button on selected text start Inspect Tool not right button menu" Tags="|firefox|menu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16334" PostTypeId="1" AcceptedAnswerId="16339" CreationDate="2018-09-28T05:30:39.380" Score="0" ViewCount="148" Body="&lt;p&gt;I am trying to install Elementary OS on my ASUS ZenBook Pro UX550VE. I have disabled fast boot and secure boot in BIOS. I used a 32 GB flash drive and flashed it with the ISO file using Rufus. When I boot to the live CD, I get the grub menu. I removed the splash and quiet parameters to see what is going on, since it would get stuck on the splash screen. It prompts me to log in using tty1, no GUI whatsoever. I login with the username elementary and no password, no problem. However, whenever I try to enter a sudo command the system freezes. Every once in a while I also get &lt;code&gt;watchdog: BUG: soft lockup - CPU#X stuck for Xs!&lt;/code&gt; and some other suspicious looking messages. I am wondering if this is an issue with my GPU since it has integrated and a GTX 1050 Ti, but I can not install NVIDIA drivers because it just freezes. Anyone know something I can try?&lt;/p&gt;&#xA;" OwnerUserId="15710" LastActivityDate="2019-08-25T11:01:55.177" Title="ASUS ZenBook Pro UX550VE Can't Install OS, Goes Straight to TTY1 and Can't Use sudo Commands" Tags="|boot|laptop|live-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16335" PostTypeId="1" CreationDate="2018-09-28T06:01:01.087" Score="0" ViewCount="772" Body="&lt;p&gt;Hi guys do you know how can I install  the complete drivers fir my 1060ti Nvidia, is integrated in my laptop. Thanks&lt;/p&gt;&#xA;" OwnerUserId="15699" LastActivityDate="2019-09-28T17:00:37.843" Title="Install full Nvidia 1060ti Drivers" Tags="|graphic-drivers|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16337" PostTypeId="1" CreationDate="2018-09-28T15:52:48.337" Score="1" ViewCount="245" Body="&lt;p&gt;Based on the conversation &lt;a href=&quot;https://community.sophos.com/products/unified-threat-management/f/web-protection-web-filtering-application-visibility-control/46191/exception-rule-for-netflix-streaming&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; these urls need to be on exception list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;^https?://([A-Za-z0-9.-]*\.)?nflximg\.com\.?/ &#xA;^https?://([A-Za-z0-9.-]*\.)?nflxvideo\.net\.?/ &#xA;^https?://[\d+(\.\d+){3}/]*/[0-9]{8}\.ism &#xA;^https?://[\d+(\.\d+){3}/]*/[0-9]{9}\.ism &#xA;^https?://[\d+(\.\d+){3}/]*/[0-9]{10}\.ism &#xA;^http?://([A-Za-z0-9.-]*\.)?netflix-*.vo.llnwd.net/.*[/QUOTE] &#xA;^http?://23.7.139.* &#xA;^https?://secure\.netflix\.com/* &#xA;^https?://uiboot\.netflix\.com/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a way to add these on EOS?&lt;/p&gt;&#xA;" OwnerUserId="15715" LastEditorUserId="15715" LastEditDate="2018-09-28T20:18:47.093" LastActivityDate="2018-10-01T13:49:12.043" Title="Add Netflix servers on proxy exception list" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16338" PostTypeId="1" CreationDate="2018-09-28T20:56:48.277" Score="0" ViewCount="62" Body="&lt;p&gt;I can't find the minimize and maximize icons.&lt;/p&gt;&#xA;" OwnerUserId="15716" LastActivityDate="2018-09-29T00:28:10.207" Title="Any way I can minimize VLC while browsing, or minimize browser?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16339" PostTypeId="2" ParentId="16334" CreationDate="2018-09-28T21:52:45.630" Score="1" Body="&lt;p&gt;Solved it by adding nomodeset to the boot options in GRUB&lt;/p&gt;&#xA;" OwnerUserId="15710" LastActivityDate="2018-09-28T21:52:45.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16340" PostTypeId="2" ParentId="16338" CreationDate="2018-09-29T00:28:10.207" Score="2" Body="&lt;p&gt;You can click the icon of the application on the dock.&lt;/p&gt;&#xA;" OwnerUserId="15717" LastActivityDate="2018-09-29T00:28:10.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16341" PostTypeId="2" ParentId="16332" CreationDate="2018-09-29T08:55:18.280" Score="0" Body="&lt;p&gt;I have also this problem in firefox 62 (not in chrome and not in epiphany) its in juno Beta 1 and 2.. and also got this bug in nighly build of firefox too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know how to fix this but if you hold the right mouse button for few seconds you can use the right mouse button menu..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But this bug need to fixed by Elementary os Juno. (this bug is not in Loki)&lt;/p&gt;&#xA;" OwnerUserId="15721" LastActivityDate="2018-09-29T08:55:18.280" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16343" PostTypeId="1" CreationDate="2018-09-29T16:17:22.730" Score="1" ViewCount="487" Body="&lt;p&gt;I recently switched to elementary OS and wanted to configure plank (or the dock, whatever it's called), but even though it is installed its not showing up in the applications menu, how do I configure it? do I need to install plank preferences through the terminal, if so could somebody tell me the command?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: if it's important i was pretty familiar with Ubuntu before switching s i know a little bit about gnome&lt;/p&gt;&#xA;" OwnerUserId="15724" LastEditorUserId="15724" LastEditDate="2018-09-29T16:37:09.657" LastActivityDate="2022-01-29T05:56:22.773" Title="how do i configure the plank in elementary os?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16345" PostTypeId="1" CreationDate="2018-09-30T01:30:21.637" Score="0" ViewCount="149" Body="&lt;p&gt;Every time I install it with USB, I always get stuck in the logo interface. What should I do? My computer is dual video card, I don't know if there is any impact&lt;/p&gt;&#xA;" OwnerUserId="15727" LastActivityDate="2019-04-21T03:03:45.670" Title="When I install elementary OS, I always fail" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16348" PostTypeId="2" ParentId="16335" CreationDate="2018-09-30T14:33:17.767" Score="0" Body="&lt;p&gt;Try (Version:   367.44 Release Date:    2016.8.23 )&#xA;for the following GPUs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TITAN X (Pascal)&#xA;GeForce GTX 1060 6GB&#xA;GeForce GTX 1060 3GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.nvidia.com/Download/driverResults.aspx/106780/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.nvidia.com/Download/driverResults.aspx/106780/en-us&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15709" LastActivityDate="2018-09-30T14:33:17.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16349" PostTypeId="2" ParentId="16335" CreationDate="2018-09-30T15:29:09.847" Score="0" Body="&lt;p&gt;Did you try In the: Appcenter &#xA;Installed / Drivers / nvidia-driver-390&#xA;(390.48) today &lt;/p&gt;&#xA;" OwnerUserId="15709" LastActivityDate="2018-09-30T15:29:09.847" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16354" PostTypeId="2" ParentId="14956" CreationDate="2018-10-01T09:04:01.517" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;How can i keep them separate ?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Quite simple, but not as intuitive unfortunately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All images used as wallpaper from &lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; will be applied by LOKI to both Desktop and Login (permissions matter too!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To keep them separate, use an image from &lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; as your login BG with greeter config line (must be unhashed!):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default-wallpaper=/usr/share/backgrounds/YOURCHOSENBG.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And to set different wall for the destop only, choose an image from any other location in the system, and use right clik-&gt;set as wallpaper - that should keep them separate. Tested it on JUNO Beta2 and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setting desktop wallpaper this way copies your chosen image to &lt;strong&gt;/home/YOURUSER/.local/share/backgrounds/&lt;/strong&gt; and imports it to Settings-&gt;Desktop-&gt;Wallpaper. This unfortunate way, its up to you to remember which image is from here...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; (applies to both Desktop and Login)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or here...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;/home/YOURUSER/.local/share/backgrounds/&lt;/strong&gt; (applies to Desktop only)&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-10-01T09:04:01.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16355" PostTypeId="2" ParentId="15013" CreationDate="2018-10-01T09:28:05.473" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I want to change the login background on Elementary, but ONLY that one&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It's quite simple, but not as intuitive unfortunately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All images used as wallpaper from &lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; will be applied by LOKI &lt;strong&gt;to both&lt;/strong&gt; Desktop and Login (permissions matter too!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To keep them separate, use an image from &lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; as your login BG with greeter config line (must be unhashed!) at &lt;strong&gt;/etc/lightdm/pantheon-greeter.conf&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;default-wallpaper=/usr/share/backgrounds/YOURCHOSENBG.jpg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And to set different wall for the &lt;strong&gt;destop only&lt;/strong&gt;, choose an image from any other location in the system, and use right clik-&gt;set as wallpaper - that should keep them separate. Tested it on LOKI and JUNO Beta2 and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setting desktop wallpaper this way copies your chosen image to &lt;strong&gt;/home/YOURUSER/.local/share/backgrounds/&lt;/strong&gt; and imports it to &lt;strong&gt;Settings-&gt;Desktop-&gt;Wallpaper&lt;/strong&gt;. This unfortunate way, its up to you to remember which image is from here...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;/usr/share/backgrounds&lt;/strong&gt; (applies to both Desktop and Login)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or here...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;/home/YOURUSER/.local/share/backgrounds/&lt;/strong&gt; (applies to Desktop only)&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-10-01T09:28:05.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16356" PostTypeId="2" ParentId="16337" CreationDate="2018-10-01T13:49:12.043" Score="1" Body="&lt;p&gt;In control panel Network settings you have a Proxy section and an exception tab for adding servers. Not really sure if it supports regular expressions, though.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1UiJe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1UiJe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; (sorry the Spanish screenshot version)&lt;/p&gt;&#xA;" OwnerUserId="5056" LastActivityDate="2018-10-01T13:49:12.043" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16357" PostTypeId="2" ParentId="16345" CreationDate="2018-10-01T15:50:59.370" Score="0" Body="&lt;p&gt;Hi there good to have you here.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got a silly question for you, did you check the image hash before installing it on the USB stick?  If not, that might be the answer you are looking for.&lt;/p&gt;&#xA;" OwnerUserId="13529" LastActivityDate="2018-10-01T15:50:59.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16359" PostTypeId="2" ParentId="12288" CreationDate="2018-10-02T06:30:59.933" Score="0" Body="&lt;p&gt;Finally, after all this waiting I found a quite good solution for this problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/glib-2.0/schemas/org.gnome.desktop.interface.gschema.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change the default value to 2 (or your desired scale factor):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;key name=&quot;scaling-factor&quot; type=&quot;u&quot;&amp;gt;&#xA;&amp;lt;default&amp;gt;2&amp;lt;/default&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;now run the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo glib-compile-schemas /usr/share/glib-2.0/schemas&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Boom, and my greeter got scaled x2 times, just as the desktop already have been.&#xA;Thought it will scale my desktop x2 times additionally, but it didn't :D&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-10-02T06:30:59.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16366" PostTypeId="2" ParentId="16031" CreationDate="2018-10-03T17:10:11.977" Score="0" Body="&lt;p&gt;Do you happen to be running elementaryOS on a laptop with a dedicated Nvidia graphics card?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be the case that elementaryOS can't power-manage it well (it is the case on many distros, thanks Nvidia), especially if you use the Nouveau driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check out &lt;a href=&quot;https://github.com/Bumblebee-Project/Bumblebee&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bumblebee&lt;/a&gt;, it allows you to manually manage your GPUs.&lt;/p&gt;&#xA;" OwnerUserId="9918" LastActivityDate="2018-10-03T17:10:11.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16369" PostTypeId="2" ParentId="13369" CreationDate="2018-10-03T21:44:49.537" Score="1" Body="&lt;p&gt;If you use Gnome, install &lt;code&gt;gnome tweaks&lt;/code&gt;, go to &lt;code&gt;keyboard and mouse&lt;/code&gt; section and disable &lt;code&gt;Middle click paste&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/OxUKU.png&quot; alt=&quot;&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="15751" LastActivityDate="2018-10-03T21:44:49.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16374" PostTypeId="2" ParentId="16316" CreationDate="2018-10-04T21:58:20.760" Score="0" Body="&lt;p&gt;Seems that is a theme problem. Did you changed it? Try beginning a new session as guest&lt;/p&gt;&#xA;" OwnerUserId="963" LastActivityDate="2018-10-04T21:58:20.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16375" PostTypeId="2" ParentId="16281" CreationDate="2018-10-04T22:02:22.620" Score="3" Body="&lt;p&gt;Have you tried &lt;a href=&quot;https://www.omgubuntu.co.uk/2018/01/elementary-desktop-icons-files-app&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tip&lt;/a&gt;? Keep in mind that desktop folders is not a deal in the elementary. This can be harsh, I know.&lt;/p&gt;&#xA;" OwnerUserId="963" LastActivityDate="2018-10-04T22:02:22.620" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16379" PostTypeId="2" ParentId="15012" CreationDate="2018-10-05T11:05:54.410" Score="0" Body="&lt;p&gt;Try login as guest to clarify if it's an user error.&lt;/p&gt;&#xA;" OwnerUserId="963" LastActivityDate="2018-10-05T11:05:54.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16380" PostTypeId="1" CreationDate="2018-10-05T13:34:23.243" Score="1" ViewCount="119" Body="&lt;p&gt;I have a very simple script that I want to run every time I shut down my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can the script be automatically executed once I press the 'Shut Down' or 'Restart' button?&lt;/p&gt;&#xA;" OwnerUserId="9534" LastEditorUserId="9534" LastEditDate="2018-10-06T11:46:43.033" LastActivityDate="2018-10-09T17:20:02.047" Title="Run a script on shutdown" Tags="|release-loki|shutdown|script|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16381" PostTypeId="1" CreationDate="2018-10-05T13:50:50.367" Score="1" ViewCount="562" Body="&lt;p&gt;Is there any way I can reset my password without having that live installation thing? Its stuck on loading initial ramdisk...&lt;/p&gt;&#xA;" OwnerUserId="15769" LastActivityDate="2022-02-01T09:34:32.453" Title="Password resetting: I dont have my live installation device available." Tags="|security|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16383" PostTypeId="2" ParentId="13196" CreationDate="2018-10-05T15:33:04.153" Score="1" Body="&lt;p&gt;I once had similar problem - my sources where somehow wrong.&#xA;Here were the correct ones for LOKI that solved it for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/apt/sources.list.d/appcenter.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and there...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://packages.elementary.io/appcenter xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...next...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/apt/sources.list.d/elementary.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and there&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...next...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo scratch-text-editor /etc/apt/sources.list.d/patches.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and there&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xenial main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-10-05T15:33:04.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16384" PostTypeId="2" ParentId="1144" CreationDate="2018-10-05T18:34:28.733" Score="0" Body="&lt;p&gt;Use Resetter app from This site &lt;a href=&quot;https://github.com/gaining/Resetter&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/gaining/Resetter&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="15195" LastActivityDate="2018-10-05T18:34:28.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16394" PostTypeId="2" ParentId="16380" CreationDate="2018-10-08T15:16:01.323" Score="1" Body="&lt;p&gt;Unfortunately I don't know of a real graphical way to achieve that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But because elementary is based on Ubuntu and thus uses systemd, you should be able to do it with a systemd service. Basically create a file &lt;code&gt;/etc/systemd/system/myshutdown.service&lt;/code&gt; with something like that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Do something on shutdown&#xA;&#xA;[Service]&#xA;Type=oneshot&#xA;RemainAfterExit=true&#xA;ExecStart=/bin/true&#xA;ExecStop=/path/to/your/script&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then enable it with: &lt;code&gt;systemctl enable myshutdown&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-10-08T15:16:01.323" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16395" PostTypeId="2" ParentId="9880" CreationDate="2018-10-08T15:22:22.257" Score="2" Body="&lt;p&gt;This will be in elementary OS Juno 5.0 without the need for any thirdparty software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://medium.com/elementaryos/juno-progress-for-january-february-9b276042716e#770b&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/juno-progress-for-january-february-9b276042716e#770b&lt;/a&gt; and  &lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-nightlight&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-nightlight&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-10-08T15:22:22.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16397" PostTypeId="1" CreationDate="2018-10-09T03:07:12.840" Score="1" ViewCount="696" Body="&lt;p&gt;Having issues with the latest version of Elementary OS in a virtual box running on a windows 10 machine. it does not seem to allow both clipboard sharing or drag and drop like most other ubuntu 18.04 based distros I've tried so far. I have made sure to enable them in my virtual box client for this virtual machine and I have reinstalled the VirtualBox additions twice now and restarted the machine multiple times as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help or way to report this to the developers?&lt;/p&gt;&#xA;" OwnerUserId="15796" LastActivityDate="2024-01-18T18:00:40.067" Title="Elementary OS guest additions does not seem to allow Clipboard sharing or Drag and Drop" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16398" PostTypeId="2" ParentId="10447" CreationDate="2018-10-09T11:39:36.180" Score="1" Body="&lt;p&gt;This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mv ~/.local/share/applications ~/.local/share/applications.temp&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I eventually removed the applications.temp folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.b-nm.at/2017/05/08/elementary-os-wingpanel-main-menu-crashing-on-search/&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6853" LastActivityDate="2018-10-09T11:39:36.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16400" PostTypeId="2" ParentId="14357" CreationDate="2018-10-09T17:33:55.610" Score="0" Body="&lt;p&gt;I installed PowerTop and ran it for a while (having tried all the usual solutions). I identified the different processes that were consuming power. Wifi was the worst but that is something that I generally need so I singled that out for special consideration. I then wrote a script that essentially went like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;# Read from a list of processes (~/.suspendprocesses) and go through each on suspending them by calling pkill -stop &amp;lt;process&amp;gt;&#xA;&#xA;# To resume, run mobileresume.&#xA;# Must be run as sudo&#xA;&#xA;# check running as sudo otherwise exit&#xA;&#xA;if [ ! $USER == root ]; then&#xA;    echo &quot;mobilesuspend must be run as root&quot;&#xA;    exit&#xA;fi&#xA;&#xA;# run through items in file&#xA;&#xA;while read p; do&#xA;    if [ ! ${p:0:1} == &quot;#&quot; ]; then&#xA;        if [ $(echo $p | cut -d' ' -f 1) == &quot;-STOP&quot; ]; then&#xA;            pkill -f $p&#xA;        elif  [ ! $p == &quot;&quot; ]; then&#xA;            pkill -f -TSTP $p&#xA;        fi&#xA;    fi&#xA;done &amp;lt; ~/.suspendprocesses&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and put the list of the processes that I felt I could temporarily do without whilst conserving power in ~/.suspendprocesses.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course this is also a companion app to resume them when I have power again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;&#xA;# Read from a list of processes (~/.suspendprocesses) and go through each one and resume them by calling pkill -CONT &amp;lt;process&amp;gt;&#xA;&#xA;# To suspend them, run moilesuspend.&#xA;# Must be run as sudo&#xA;&#xA;# check running as sudo otherwise exit&#xA;&#xA;if [ ! $USER == root ]; then&#xA;    echo &quot;mobileresume must be run as root&quot;&#xA;    exit&#xA;fi&#xA;&#xA;# run through items in file&#xA;&#xA;while read p; do&#xA;    if [ ! ${p:0:1} == &quot;#&quot; ]; then&#xA;        if [ ! $p == &quot;&quot; ]; then&#xA;            if [ $(echo $p | cut -d' ' -f 1) == &quot;-STOP&quot; ]; then&#xA;                p = $(echo $p | cut -d' ' -f 2)&#xA;            fi&#xA;        pkill -f -CONT $p&#xA;        fi&#xA;    fi&#xA;done &amp;lt; ~/.suspendprocesses&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have something similar to stop the wifi card from draining power (and believe me, that one is the big consumer) but run that totally separately for obvious reasons. I'll leave that as an exercise for the reader!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go on a long journey, simply calling this script can double the life of my battery. Killing wifi can add another big amount.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note for all: Check how much power and bandwidth Skype consumes even when &quot;idle&quot;...&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-10-09T17:33:55.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16402" PostTypeId="1" AcceptedAnswerId="16403" CreationDate="2018-10-09T18:37:27.787" Score="1" ViewCount="400" Body="&lt;p&gt;After performing a fresh install of Loki 0.4.1 on my White Macbook 2010, which worked perfectly, I proceeded to update the system from within the App Center itself. When I rebooted, after entering my disk password (it's encrypted), I got stuck on a black screen with the mouse pointer. I can move it and press enter (which sometimes hides the cursor, but ends up showing it again). I can also open a tty (but it closes itself from time to time to show again the black screen with the pointer, almost like if I were stuck on a loop).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried several things after this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Download and install elementaryOS 5.0 Beta 2. Black Screen.&lt;/li&gt;&#xA;&lt;li&gt;Download and install elementary0S 0.4.1 Works fine.&lt;/li&gt;&#xA;&lt;li&gt;Upgrade a fresh 0.4.1 install. Stops working and black screen appears again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have no idea of what to do now, so I would really appreciate if someone could walk me through.&lt;/p&gt;&#xA;" OwnerUserId="7439" LastEditorUserId="7439" LastEditDate="2018-10-09T20:38:35.530" LastActivityDate="2018-10-09T20:38:35.530" Title="Macbook 2010 not booting after update (black screen)" Tags="|macbook|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16403" PostTypeId="2" ParentId="16402" CreationDate="2018-10-09T20:37:58.600" Score="0" Body="&lt;p&gt;Ok, I found the answer.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Once eOS is installed and booted (stuck on the black screen), Open a tty (find a way to access your command line, like &lt;code&gt;ctrl+alt+fn+F1&lt;/code&gt; on a Mac) and login.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add the parameter &lt;code&gt;nouveau.modeset=0&lt;/code&gt; at the end of &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;&quot;&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Save &lt;code&gt;(ctrl+x)&lt;/code&gt;, run &lt;code&gt;sudo update-grub&lt;/code&gt;, and &lt;code&gt;reboot&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now it works (not sure what are the implications of setting nouveau.modeset=0 performance wise, if any)&lt;/p&gt;&#xA;" OwnerUserId="7439" LastActivityDate="2018-10-09T20:37:58.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16406" PostTypeId="1" CreationDate="2018-10-11T13:01:26.590" Score="0" ViewCount="111" Body="&lt;p&gt;When I deleted friles to my Trash, I can not empty the bin.&#xA;I need to restart my desktop in order to empty it.&#xA;What is the problem here ?&lt;/p&gt;&#xA;" OwnerUserId="15807" LastActivityDate="2024-03-14T10:02:50.347" Title="Trash doesn't clean" Tags="|pantheon-files|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16407" PostTypeId="2" ParentId="16406" CreationDate="2018-10-11T20:15:28.920" Score="0" Body="&lt;p&gt;This could be the case of deleted files from the USB drive that was later unmounted. The Trash is empty but the icon is always showing it's full. At least that's what is happening to me sometimes. I wouldn't worry.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-10-11T20:15:28.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16408" PostTypeId="1" CreationDate="2018-10-12T05:36:10.223" Score="0" ViewCount="964" Body="&lt;p&gt;Yesterday, I was updating my computer, but suddenly my internet connection failed. When I restarted it and tried to continue with the process, I had this message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gonzalocriollog@gonzalocriollog-Inspiron-5420:~$ sudo apt-get upgrade&#xA;[sudo] password for gonzalocriollog:               &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  amd64-microcode thermald&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following packages will be REMOVED:&#xA;  linux-image-4.15.0-36-generic&#xA;0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;After this operation, 8.141 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA;(Reading database ... 437137 files and directories currently installed.)&#xA;Removing linux-image-4.15.0-36-generic (4.15.0-36.39~16.04.1) ...&#xA;/etc/kernel/postrm.d/initramfs-tools:&#xA;update-initramfs: Deleting /boot/initrd.img-4.15.0-36-generic&#xA;/etc/kernel/postrm.d/zz-update-grub:&#xA;/usr/sbin/grub-mkconfig: 11: /etc/default/grub: splash: not found&#xA;run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127&#xA;dpkg: error processing package linux-image-4.15.0-36-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;Errors were encountered while processing:&#xA; linux-image-4.15.0-36-generic&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I can't download anything, neither update my current apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After &lt;code&gt;sudo apt-get autoremove&lt;/code&gt;, I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gonzalocriollog@gonzalocriollog-Inspiron-5420:~$ sudo apt-get autoremove&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages will be REMOVED:&#xA;  amd64-microcode linux-image-4.15.0-36-generic thermald&#xA;0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;After this operation, 8.803 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA;(Reading database ... 437137 files and directories currently installed.)&#xA;Removing linux-image-4.15.0-36-generic (4.15.0-36.39~16.04.1) ...&#xA;/etc/kernel/postrm.d/initramfs-tools:&#xA;update-initramfs: Deleting /boot/initrd.img-4.15.0-36-generic&#xA;/etc/kernel/postrm.d/zz-update-grub:&#xA;/usr/sbin/grub-mkconfig: 11: /etc/default/grub: splash: not found&#xA;run-parts: /etc/kernel/postrm.d/zz-update-grub exited with return code 127&#xA;dpkg: error processing package linux-image-4.15.0-36-generic (--remove):&#xA; subprocess installed post-removal script returned error exit status 1&#xA;Removing amd64-microcode (3.20180524.1~ubuntu0.16.04.2) ...&#xA;update-initramfs: deferring update (trigger activated)&#xA;Removing thermald (1.5-2ubuntu4) ...&#xA;Processing triggers for initramfs-tools (0.122ubuntu8.13) ...&#xA;update-initramfs: Generating /boot/initrd.img-4.15.0-34-generic&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_ver9_14.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_guc_ver8_7.bin for module i915&#xA;Processing triggers for dbus (1.10.6-1ubuntu3.3) ...&#xA;Processing triggers for man-db (2.7.5-1) ...&#xA;Errors were encountered while processing:&#xA; linux-image-4.15.0-36-generic&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15582" LastEditorUserId="15582" LastEditDate="2018-10-14T21:27:31.333" LastActivityDate="2019-04-13T04:04:41.203" Title="Help: E: Sub-process /usr/bin/dpkg returned an error code (1)" Tags="|updates|kernel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16409" PostTypeId="1" CreationDate="2018-10-12T11:17:58.360" Score="1" ViewCount="36" Body="&lt;p&gt;Every time I resume from suspension this window shows up:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lp97I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lp97I.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;xprop shows &lt;code&gt;WM_CLASS(STRING) = &amp;quot;io.elementary.pantheon-agent-polkit&amp;quot;, &amp;quot;Io.elementary.pantheon-agent-polkit&amp;quot;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Why this is appearing? How can I disable it?&lt;/p&gt;&#xA;&lt;p&gt;I'm using Elementary Juno beta.&lt;/p&gt;&#xA;" OwnerUserId="9706" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-10-12T11:17:58.360" Title="Resume from suspension ask password to read smart data" Tags="|release-juno|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16414" PostTypeId="2" ParentId="16037" CreationDate="2018-10-12T19:18:02.023" Score="1" Body="&lt;p&gt;Are you on a laptop? Go into settings, mouse and touchpad and uncheck tap to click and it should stop exhibiting that behavior. &lt;/p&gt;&#xA;" OwnerUserId="15819" LastActivityDate="2018-10-12T19:18:02.023" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16415" PostTypeId="2" ParentId="16343" CreationDate="2018-10-12T20:11:01.713" Score="2" Body="&lt;p&gt;Hold control and simultaneously right-click the dock. Select preferences.&lt;/p&gt;&#xA;" OwnerUserId="15821" LastActivityDate="2018-10-12T20:11:01.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16416" PostTypeId="2" ParentId="16301" CreationDate="2018-10-12T20:22:27.483" Score="1" Body="&lt;p&gt;This should work:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will add an extra icon in settings.&lt;/p&gt;&#xA;" OwnerUserId="15821" LastEditorUserId="3018" LastEditDate="2018-10-15T07:49:08.447" LastActivityDate="2018-10-15T07:49:08.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16417" PostTypeId="1" CreationDate="2018-10-12T22:42:08.473" Score="2" ViewCount="79" Body="&lt;p&gt;I did a sudo apt install libpng16-dev  to upgrade filezilla. but it removed a lot of dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I can't install elementary-sdk and plenty of other depencies, the following error occurs.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; elementary-sdk : Depends: libgala-dev but it is not going to be installed&#xA;                  Depends: libgranite-dev but it is not going to be installed&#xA;                  Depends: libgtk-3-dev but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried fixing broken packaged at the recovery menu but it didn't work. How can I fix this. I am running Loki&lt;/p&gt;&#xA;" OwnerUserId="15005" LastActivityDate="2024-03-15T15:02:20.297" Title="Installed libpng16-dev, now I can't install elementary-sdk and other dependencies" Tags="|release-loki|updates|software-installation|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16418" PostTypeId="2" ParentId="16417" CreationDate="2018-10-13T02:25:08.263" Score="0" Body="&lt;p&gt;You can remove &lt;code&gt;FileZilla&lt;/code&gt; and &lt;code&gt;libpng16-dev&lt;/code&gt;, reinstall the SDK, and then install FileZilla via Flatpak:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/apps/details/org.filezillaproject.Filezilla&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/org.filezillaproject.Filezilla&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="242" LastActivityDate="2018-10-13T02:25:08.263" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16420" PostTypeId="1" CreationDate="2018-10-13T12:20:25.193" Score="0" ViewCount="431" Body="&lt;p&gt;I am using Elementary OS Juno Beta 2. Everything is working nicely, however, I have little issue with my wireless earphones (Apple AirPods).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have managed to connect it via Bluetooth and they work, however the volume is just too quiet. I have checked my volume settings and the volume is on 100%. The max volume is around 50% of what I get if I am using it with my iPhone or Windows 10. I have tried disconnecting and reconnecting, but that did not help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They worked normally on my iPhone and on this same laptop when it was using Windows 10, so the headphones are definitely not malfunctioning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could someone please assist me?&lt;/p&gt;&#xA;" OwnerUserId="15826" LastActivityDate="2019-05-12T13:01:50.270" Title="My wireless earphones are too quiet" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16421" PostTypeId="2" ParentId="16420" CreationDate="2018-10-13T13:45:20.530" Score="1" Body="&lt;p&gt;Actually i recently move to linux, about two days ago to be exact. So i doubt about this advice. But,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If i'm not mistaken you can adjust volume with alsamixer, just type &lt;code&gt;alsamixer&lt;/code&gt; in the terminal window and press Enter. You can adjust it from there by pressing up and down arrow key and use the left right arrow key to navigate&lt;/p&gt;&#xA;" OwnerUserId="15761" LastActivityDate="2018-10-13T13:45:20.530" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16422" PostTypeId="1" AcceptedAnswerId="16423" CreationDate="2018-10-14T15:39:05.373" Score="0" ViewCount="244" Body="&lt;p&gt;Currently I have Pop!_OS installed on my Dell XPS 15 but I am planning to eOS next week. The good thing is that I already created a separate &lt;code&gt;/home&lt;/code&gt; partition. Can I just erase the system partition (50GB) and install eOS there while keeping all my files as they are? Or should I make a backup, erase everything and start from scratch?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the first time I hop to another distro so I'm kind of a newbie in this area.&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2018-10-14T18:04:48.920" Title="Moving from Pop!_OS to Juno" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16423" PostTypeId="2" ParentId="16422" CreationDate="2018-10-14T18:04:48.920" Score="1" Body="&lt;p&gt;If you just save your /home partition you'll have all your data and most config files that your apps use. However you'll loose all your installed apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There isn't any perfect solution to move apps from your old system to the new one. But I'll explain the best one based on &lt;a href=&quot;https://askubuntu.com/questions/2389/generating-list-of-manually-installed-packages-and-querying-individual-packages&quot;&gt;this question&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a file called &lt;code&gt;installed_packages&lt;/code&gt; with your manually installed apps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;comm -23 &amp;lt;(apt-mark showmanual | sort -u) &amp;lt;(gzip -dc /var/log/installer/initial-status.gz | sed -n 's/^Package: //p' | sort -u) &amp;gt; installed_packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then copy that file to the new installation, open terminal on the same directory and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y $(cat installed_packages)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also edit &lt;code&gt;installed_packages&lt;/code&gt; and add or delete any package you want. You may get some errors like &lt;code&gt;package not found&lt;/code&gt;. That's because you didn't add the ppa you've used for that app.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you have 2 options: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best one is to install that package from any other method that doesn't require a ppa (snap, flaptak, appimage...). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other option is to save all the files inside &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; and add the necessary entries on the new system.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-14T18:04:48.920" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16424" PostTypeId="2" ParentId="16408" CreationDate="2018-10-14T22:13:41.897" Score="1" Body="&lt;p&gt;Thanks to @user535733 for the solution in this post (&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1083760/errors-were-found-while-processing-linux-image-4-15-0-36-generic/1083771#1083771&quot;&gt;https://askubuntu.com/questions/1083760/errors-were-found-while-processing-linux-image-4-15-0-36-generic/1083771#1083771&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, I uninstalled &lt;code&gt;grub-common&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After, I got this message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable) E: Unable to lock directory /var/lib/apt/lists/.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To solve this, I used &lt;code&gt;sudo rm /var/lib/apt/lists/* -vf.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, &lt;code&gt;sudo apt-get update&lt;/code&gt;. Now I can install and update apps again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much!&lt;/p&gt;&#xA;" OwnerUserId="15582" LastActivityDate="2018-10-14T22:13:41.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16425" PostTypeId="2" ParentId="15674" CreationDate="2018-10-15T14:36:19.557" Score="-1" Body="&lt;p&gt;elementary OS does not officially support an upgrade from 0.4 to 5.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said elementary OS is based on Ubuntu which is based on Debian. So the &lt;a href=&quot;https://www.debian.org/releases/stable/amd64/release-notes/ch-upgrading.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Debian upgrade path&lt;/a&gt; should work, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Big fat disclaimer:&lt;/strong&gt; This is for experienced users and is obviously unsupported. It might break your system or it might leave your system in a way that is almost-but-not-exactly elementary OS 5.0. If something doesn't work quite right after the upgrade, don't expect help from the nice folks from elementary, who specifically chose not to support this kind of upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the following in a VM and it worked flawlessly for my installation.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Update all packages and make a backup!&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save all your work and logout (so you get to the login screen)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Drop to a console terminal with Ctrl + Alt + F1;&#xA;Do NOT do the following in a UI terminal, it will most probably fail and leave you with a broken system&lt;/li&gt;&#xA;&lt;li&gt;Login and start a root shell with &lt;code&gt;sudo -s&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Stop the UI: &lt;code&gt;systemctl stop lightdm&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;You need to update &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and &lt;code&gt;/etc/apt/sources.list.d/{appcenter,elementary,patches}&lt;/code&gt;:&#xA;Change every occurence of &lt;code&gt;xenial&lt;/code&gt; in those 4 files to &lt;code&gt;bionic&lt;/code&gt;. Save and exit your editor.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt dist-upgrade&lt;/code&gt;&#xA;When it asks you about a modified config file, install the new one with 'Y'&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;reboot&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If everything went well, you will boot into your updated elementary OS 5.0. I can't tell if the experience is exactly the same, but to me it looked perfectly fine and I couldn't find anything that doesn't seem right, other than some missing app icons on the dock that were previously there. That is a quick fix, though. Just add them back with drag'n'drop.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-10-15T14:36:19.557" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16426" PostTypeId="2" ParentId="16247" CreationDate="2018-10-15T22:06:26.910" Score="0" Body="&lt;p&gt;I have a mid 2009 Macbook Pro 5.5 and I just installed today. Use a Ethernet cable and than install the driver from the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15835" LastEditorUserId="16827" LastEditDate="2019-01-25T05:45:51.387" LastActivityDate="2019-01-25T05:45:51.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16428" PostTypeId="1" AcceptedAnswerId="17949" CreationDate="2018-10-16T04:00:41.337" Score="0" ViewCount="172" Body="&lt;p&gt;I was following along with &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow noreferrer&quot;&gt;the &quot;Getting Started&quot; tutorial&lt;/a&gt;, and when I got to &lt;a href=&quot;https://elementary.io/docs/code/getting-started#Adding-Translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;the step to add translations&lt;/a&gt;, my project started failing to compile. I can't make sense of the error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be really handy if there were a Github repo (or something) with working code and tagged commits that follow along with the tutorial. Does such a thing exist?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, then I need your help! The error I'm getting is this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ninja&#xA;[0/1] Regenerating build files.&#xA;The Meson build system&#xA;Version: 0.48.0&#xA;Source dir: /home/nathan/projects/fanboy&#xA;Build dir: /home/nathan/projects/fanboy/build&#xA;Build type: native build&#xA;Project name: com.github.nwallace.fanboy&#xA;Project version: undefined&#xA;Native C compiler: cc (gcc 8.2.1 &quot;cc (GCC) 8.2.1 20180831&quot;)&#xA;Native Vala compiler: valac (valac 0.42.2)&#xA;Build machine cpu family: x86_64&#xA;Build machine cpu: x86_64&#xA;Dependency gtk+-3.0 found: YES (cached)&#xA;Build targets in project: 5&#xA;Found ninja-1.8.2 at /usr/bin/ninja&#xA;[3/4] Compiling C object 'com.github.nwallace.fanboy@exe/meson-generated_src_Application.c.o'.&#xA;FAILED: com.github.nwallace.fanboy@exe/meson-generated_src_Application.c.o &#xA;cc -Icom.github.nwallace.fanboy@exe -I. -I.. -I/usr/include/gtk-3.0 -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/lib/libffi-3.2.1/include -I/usr/include/fribidi -I/usr/include/cairo -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/harfbuzz -I/usr/include/uuid -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/gio-unix-2.0 -I/usr/include/libdrm -I/usr/include/atk-1.0 -I/usr/include/at-spi2-atk/2.0 -I/usr/include/at-spi-2.0 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -w -g -DGETTEXT_PACKAGE=com.github.nwallace.fanboy -pthread  -MD -MQ 'com.github.nwallace.fanboy@exe/meson-generated_src_Application.c.o' -MF 'com.github.nwallace.fanboy@exe/meson-generated_src_Application.c.o.d' -o 'com.github.nwallace.fanboy@exe/meson-generated_src_Application.c.o' -c 'com.github.nwallace.fanboy@exe/src/Application.c'&#xA;../src/Application.vala: In function ‘__lambda4_’:&#xA;&amp;lt;command-line&amp;gt;: error: ‘com’ undeclared (first use in this function)&#xA;/usr/include/glib-2.0/glib/gi18n-lib.h:30:42: note: in expansion of macro ‘GETTEXT_PACKAGE’&#xA; #define  _(String) ((char *) g_dgettext (GETTEXT_PACKAGE, String))&#xA;                                          ^~~~~~~~~~~~~~~&#xA;../src/Application.vala:35:47: note: in expansion of macro ‘_’&#xA;       hello_button.label = _(&quot;Hello World!&quot;);&#xA;                                               ^&#xA;&amp;lt;command-line&amp;gt;: note: each undeclared identifier is reported only once for each function it appears in&#xA;/usr/include/glib-2.0/glib/gi18n-lib.h:30:42: note: in expansion of macro ‘GETTEXT_PACKAGE’&#xA; #define  _(String) ((char *) g_dgettext (GETTEXT_PACKAGE, String))&#xA;                                          ^~~~~~~~~~~~~~~&#xA;../src/Application.vala:35:47: note: in expansion of macro ‘_’&#xA;       hello_button.label = _(&quot;Hello World!&quot;);&#xA;                                               ^&#xA;../src/Application.vala: In function ‘my_app_real_activate’:&#xA;&amp;lt;command-line&amp;gt;: error: ‘com’ undeclared (first use in this function)&#xA;/usr/include/glib-2.0/glib/gi18n-lib.h:30:42: note: in expansion of macro ‘GETTEXT_PACKAGE’&#xA; #define  _(String) ((char *) g_dgettext (GETTEXT_PACKAGE, String))&#xA;                                          ^~~~~~~~~~~~~~~&#xA;../src/Application.vala:32:51: note: in expansion of macro ‘_’&#xA;     var hello_button = new Gtk.Button.with_label(_(&quot;Click me!&quot;));&#xA;                                                   ^&#xA;ninja: build stopped: subcommand failed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;You can see the full project source on my Github. Here's a link to the relevant commit that broke things: &lt;a href=&quot;https://github.com/nwallace/fanboy/compare/add-translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/nwallace/fanboy/compare/add-translations&lt;/a&gt;&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Some relevant files copy/pasted here for ease/future reference:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;src/Application.vala&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;class MyApp : Gtk.Application {&#xA;  public MyApp() {&#xA;    Object(&#xA;      application_id: &quot;com.github.nwallace.fanboy&quot;,&#xA;      flags: ApplicationFlags.FLAGS_NONE&#xA;    );&#xA;  }&#xA;&#xA;  protected override void activate() {&#xA;    var window = new Gtk.ApplicationWindow(this);&#xA;    var hello_button = new Gtk.Button.with_label(_(&quot;Click me!&quot;));&#xA;    hello_button.margin = 12;&#xA;    hello_button.clicked.connect(() =&amp;gt; {&#xA;      hello_button.label = _(&quot;Hello World!&quot;);&#xA;      hello_button.sensitive = false;&#xA;    });&#xA;    window.set_title(_(&quot;Welcome to GNOME&quot;));&#xA;    window.set_default_size(300, 300);&#xA;    window.add(hello_button);&#xA;    window.show_all();&#xA;  }&#xA;}&#xA;&#xA;public int main(string[] args) {&#xA;  return new MyApp().run(args);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;meson.build&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# project name and programming language&#xA;project('com.github.nwallace.fanboy', 'vala', 'c')&#xA;&#xA;i18n = import('i18n')&#xA;&#xA;add_global_arguments('-DGETTEXT_PACKAGE=@0@'.format(meson.project_name()), language:'c')&#xA;&#xA;# Create a new executable, list the files we want to compile, list the dependencies we need, and install&#xA;executable(&#xA;  meson.project_name(),&#xA;  'src/Application.vala',&#xA;  dependencies: [&#xA;    dependency('gtk+-3.0')&#xA;  ],&#xA;  install: true&#xA;)&#xA;&#xA;# Translate and install our .desktop file&#xA;i18n.merge_file(&#xA;  input: join_paths('data', meson.project_name() + '.desktop.in'),&#xA;  output: meson.project_name() + '.desktop',&#xA;  po_dir: join_paths(meson.source_root(), 'po'),&#xA;  type: 'desktop',&#xA;  install: true,&#xA;  install_dir: join_paths(get_option('datadir'), 'applications')&#xA;)&#xA;&#xA;subdir('po')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15836" LastActivityDate="2019-01-16T22:16:52.610" Title="Error with translations while following &quot;Get Started&quot; tutorial" Tags="|development|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16429" PostTypeId="2" ParentId="860" CreationDate="2018-10-16T06:04:13.177" Score="2" Body="&lt;p&gt;The solution proposed by Benni might have worked in the past, but I could not reproduce it with Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the other hand, the solution proposed by Giovanni Milanesi worked perfeclty and allowed me to have multiple calendars within Maya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reproduce bellow the steps (credits goes to him):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Google account and create an App Password&lt;/li&gt;&#xA;&lt;li&gt;Open Google Calendar, go to settings of the single calendar you want to see and copy the &lt;strong&gt;calendar ID&lt;/strong&gt; (it's something like iislfkjsldjfsdljslsflkslksdfs8@group.calendar.google.com )&lt;/li&gt;&#xA;&lt;li&gt;Open Elementary calendar and click &quot;add new calendar&quot;)&lt;/li&gt;&#xA;&lt;li&gt;Choose &quot;Google&quot; as calendar type, fill whatever name you want and in the &lt;strong&gt;user field&lt;/strong&gt; paste the calendar ID&lt;/li&gt;&#xA;&lt;li&gt;When it asks for authentication fill it with your &lt;strong&gt;google username&lt;/strong&gt; and the &lt;strong&gt;app password&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;DONE!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You can repeat the steps to add every calendar you want to see&lt;/p&gt;&#xA;" OwnerUserId="15837" LastActivityDate="2018-10-16T06:04:13.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16431" PostTypeId="1" CreationDate="2018-10-16T09:48:46.513" Score="0" ViewCount="2556" Body="&lt;p&gt;I just installed Juno 5.0 x64 and I was wondering how to sync my Google Drive on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried some methods but there was no success. :(&#xA; I've searched here for this question, but they were for older versions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me I am so a beginner in Linux I am so desperate :D&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="15839" LastActivityDate="2019-01-02T23:21:38.610" Title="Google Drive sync on Juno" Tags="|release-juno|" AnswerCount="7" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16432" PostTypeId="1" AcceptedAnswerId="17758" CreationDate="2018-10-16T20:29:54.847" Score="3" ViewCount="499" Body="&lt;p&gt;For some reason, in order to switch my wallpaper, I need to reboot my pc every time, and if I am not doing that, it will just mark the wallpaper I chose as &quot;selected&quot;, but won't actually change until I reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any solution to that?&lt;/p&gt;&#xA;" OwnerUserId="13966" LastEditorUserId="14940" LastEditDate="2019-01-01T18:44:29.993" LastActivityDate="2019-01-01T18:44:29.993" Title="Switching wallpapers doesn't work on Juno" Tags="|release-juno|wallpaper|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16433" PostTypeId="2" ParentId="16431" CreationDate="2018-10-16T20:37:24.700" Score="1" Body="&lt;p&gt;I also tried some &quot;scripting solutions&quot; but finally I came to &lt;a href=&quot;https://www.insynchq.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Insync&lt;/a&gt;. It's not free but in my opinion it's worth its prize. &#xA;Maybe you will give it a try.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2018-10-16T20:37:24.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16434" PostTypeId="1" AcceptedAnswerId="16436" CreationDate="2018-10-16T21:03:10.630" Score="0" ViewCount="201" Body="&lt;p&gt;I've been using Juno Beta 2 and loving it. I just found that Juno final has been released. Since i have my laptop all set, i'd like to upgrade to final without losing anything. Is it possible? Does it upgrade automatically with simple updates, or do i have to clean install?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-18T15:21:51.940" Title="Upgrade from Juno beta to final?" Tags="|updates|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-03T20:39:55.947" ContentLicense="CC BY-SA 4.0" />
  <row Id="16435" PostTypeId="1" CreationDate="2018-10-16T22:15:55.423" Score="0" ViewCount="1285" Body="&lt;p&gt;I just installed Juno and I really like it. However I was unable to find the setting to add an specific color profile. As I remember correctly, there has been an own entry in the system settings in Loki, but I'm unable to find it in Juno. I also installed the gnome-color-manager, but it just lets me view the installed color profiles without the possibility changing them. Is this function hidden somewhere in the settings or do I have to use the terminal or isn't it possible to calibrate the screen in the actual status of Juno?&lt;/p&gt;&#xA;" OwnerUserId="15846" LastActivityDate="2018-12-31T08:01:50.420" Title="Install color profile in juno" Tags="|release-juno|color|profile|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-20T06:00:06.887" ContentLicense="CC BY-SA 4.0" />
  <row Id="16436" PostTypeId="2" ParentId="16434" CreationDate="2018-10-16T23:57:17.447" Score="1" Body="&lt;p&gt;You ll have to do a clean install. I would recommend it regardless to be honest. Good luck! Juno seems quite fresh in colours and slim in responsiveness!&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2018-10-16T23:57:17.447" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16439" PostTypeId="1" CreationDate="2018-10-17T02:56:38.170" Score="2" ViewCount="2154" Body="&lt;p&gt;This used to be an option in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;System Settings &amp;gt; Desktop &amp;gt; Hot Corners&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't see it in Juno.&#xA;Why was this removed? I love, love, love this feature and it is the first thing I activate on a new install.&#xA;How can I get it back?&#xA;Thanks! Loving Juno so far.&lt;/p&gt;&#xA;" OwnerUserId="423" LastEditorUserId="14940" LastEditDate="2018-12-28T13:43:00.313" LastActivityDate="2019-02-25T04:39:34.300" Title="Hotcorner for minimize current window" Tags="|release-juno|hot-corners|minimize|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16440" PostTypeId="2" ParentId="16431" CreationDate="2018-10-17T02:57:57.227" Score="1" Body="&lt;p&gt;Overgrive, also not fee, but it's only $5 and it works really well- &lt;a href=&quot;https://www.thefanclub.co.za/overgrive&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.thefanclub.co.za/overgrive&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2018-10-17T02:57:57.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16441" PostTypeId="1" CreationDate="2018-10-17T04:20:19.080" Score="2" ViewCount="456" Body="&lt;p&gt;In the app center, there are two choices for steam: 1. steam with the default cog icon, and steam installer with the regular steam icon. There's also the deb file you can download from the Steam website. My question is which of these methods is the best way to install steam in Juno?&#xA;I've already had to reinstall the OS because I did not choose wisely. Which one do you all recommend?&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="423" LastActivityDate="2018-10-19T17:52:50.737" Title="Steam in Juno- how to install" Tags="|applications|appcenter|release-juno|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16445" PostTypeId="1" CreationDate="2018-10-17T09:13:33.123" Score="7" ViewCount="3171" Body="&lt;p&gt;In monitor settings at System settings, after re-ordering the screens correctly, if I want to disable the internal screen, even after disabling it the laptop screen will still be on and show Pantheon. Only after closing the lid does it disable it accordingly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, after selecting secondary screen as primary, Pantheon did not move the main UI (upper panel, dock, etc) to that screen accordingly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Intel HD Graphics 630 with Nvidia Optimus (NVIDIA GTX 1050) and NVIDIA'S proprietary drivers. I'm currently running with the NVIDIA card selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tested it with the Intel card selected, I'll get back to you on this. It'll probably have the same behaviour since the Intel card is the one managing the screens.&lt;/p&gt;&#xA;" OwnerUserId="15854" LastActivityDate="2020-05-06T15:30:04.310" Title="Monitor settings do not work. Cannot disable integrated screen of the laptop" Tags="|display|drivers|graphics|release-juno|" AnswerCount="5" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16449" PostTypeId="1" CreationDate="2018-10-17T10:30:19.817" Score="3" ViewCount="1003" Body="&lt;p&gt;I'm having an issue where I right click and as soon as I release the button, it selects the option where the mouse is like I left-clicked. Also, context menus are appearing in the middle of where my mouse is. Attached is an imaged that shows what I'm saying:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9osAe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9osAe.png&quot; alt=&quot;See the mouse in the middle of the context menu?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15854" LastActivityDate="2019-07-27T17:07:17.707" Title="Firefox Context Menus are weird and don't work correctly" Tags="|mouse|pantheon|release-juno|firefox|context-menu|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16454" PostTypeId="2" ParentId="16019" CreationDate="2018-10-17T13:58:34.343" Score="0" Body="&lt;p&gt;It's because of the accelerometer that HP puts in their laptops. Disable it and you'll be fine.&lt;/p&gt;&#xA;" OwnerUserId="15854" LastActivityDate="2018-10-17T13:58:34.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16455" PostTypeId="1" CreationDate="2018-10-17T15:48:09.287" Score="1" ViewCount="541" Body="&lt;p&gt;Laptop - Thinkpad T470&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Loki, when I connect my monitor via USB-C, I was able to select the monitor as a sound target. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Juno, the monitor does not appear as a sound target. The sound options available are the laptop's internal speakers and headphones&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same issue occurs on HDMI as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions on how I can fix this?  &lt;/p&gt;&#xA;" OwnerUserId="15866" LastEditorUserId="15866" LastEditDate="2018-10-17T16:00:33.420" LastActivityDate="2019-05-03T07:01:45.837" Title="Elementary OS Juno - No sound on USB-C monitor" Tags="|sound|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16456" PostTypeId="1" CreationDate="2018-10-17T15:58:47.147" Score="3" ViewCount="1113" Body="&lt;p&gt;I cannot setup my Gmail account. It says id or password is wrong. I suspect it is because I have 2 factor authentication setup to text me when I access from a new application or PC. I guess I could turn off 2 factor, but really don't want to do that.&lt;/p&gt;&#xA;" OwnerUserId="12405" LastActivityDate="2018-12-01T17:40:44.467" Title="Gmail 2 factor does not work" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16457" PostTypeId="2" ParentId="7915" CreationDate="2018-10-17T16:29:32.720" Score="0" Body="&lt;p&gt;First of all, you should try to unhide your grub menu.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;code&gt;/etc/default/grub&lt;/code&gt; as sudo&lt;/li&gt;&#xA;&lt;li&gt;Comment the line &lt;code&gt;GRUB_HIDDEN_TIMEOUT=0&lt;/code&gt; (put a # in the&#xA;beginning)&lt;/li&gt;&#xA;&lt;li&gt;Set &lt;code&gt;GRUB_TIMEOUT_STYLE=menu&lt;/code&gt; (instead of hidden)&lt;/li&gt;&#xA;&lt;li&gt;Open terminal and do: &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot and you should see Grub menu. Select Windows and see if&#xA;it boots.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If it doesn't boot, you should repair your Windows MBR. There is a comprehensive guide here: &lt;a href=&quot;https://neosmart.net/wiki/fix-uefi-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://neosmart.net/wiki/fix-uefi-boot/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And after repairing your Windows MBR, you need &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-repair&lt;/a&gt; to get Elementary to boot and then again, you need to unhide your grub menu with the steps i described above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens to me everytime i install Elementary in a Windows 10 UEFI dual-boot. I have to repair Windows MBR, run boot-repair and unhide Grub from Elementary. It may seem boring and time-consuming, but you can do it under 20 minutes.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-10-17T16:58:17.110" LastActivityDate="2018-10-17T16:58:17.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16458" PostTypeId="1" CreationDate="2018-10-17T17:41:38.403" Score="5" ViewCount="4160" Body="&lt;p&gt;Just installed Juno. Overall a great job, elementary team should be really proud of their work!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm having some issues with display scaling. I have a Dell XPS 13 (3200 x 1800) and two external monitors (1920 x 1080). When I have the monitors connected, I set my display resolution to (1920 x 1080) since you can't set different scaling factors across the displays (as far as I know). This is the same setup that I had for eOS Loki where it worked properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Juno, my windows and UI elements are all huge at the 1920 x 1080 resolution. I have tried all three scaling factor settings (Automatic/LoDPI/Pixel Doubled) in the elementary display settings and none of them seem to affect this at all (even after reboot). Likewise, editing the gnome window scaling factor directly in dconf doesn't appear to do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I've found that works is using xrandr to set the scale to 2x2 and then back to 1x1 on all three displays. If I just set it to 1x1 without setting it to 2x2 first, nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After I do this, everything appears at a normal scale. I tried putting my xrandr command as a custom command to run at startup, but that does not work, so I suspect something is overriding the scale after startup which would also explain why the gnome settings aren't being respected I think.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any else having this issue or have any ideas? Is this a bug in Juno or Ubuntu 18.04? Any workarounds?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: Found a workaround that I'll be using for now via &lt;a href=&quot;https://wiki.gnome.org/HowDoI/HiDpi&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome HiDpi&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Force disabling DPI scaling has the desired effect and is persistent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;[{'Gdk/WindowScalingFactor', &amp;lt;1&amp;gt;}]&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notifications are still huge, but the setup is at least usable. This still is not ideal.&lt;/p&gt;&#xA;" OwnerUserId="15868" LastEditorUserId="26" LastEditDate="2019-02-20T01:28:30.693" LastActivityDate="2019-04-30T22:56:18.040" Title="Juno Display Scaling Issues" Tags="|display|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16459" PostTypeId="1" AcceptedAnswerId="16478" CreationDate="2018-10-17T18:00:49.157" Score="0" ViewCount="269" Body="&lt;p&gt;First of all, Elementary OS Juno. WHAAAAAAT, great, fast and beautiful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the problem.&#xA;Can't find my Gforce Nvidia listed on my hardware.&#xA;The same happened when I installed Mint and Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am new to Linux, coming from OSx.&#xA;Any help guys?&#xA;Thanks&lt;a href=&quot;https://i.stack.imgur.com/AnX9G.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AnX9G.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updates:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently I installed it.&#xA;Using the App Center, it came as a automatic update.&#xA;However, it doesn't seen to be working properly as you can see through the screenshots:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9C9H3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9C9H3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JmwbA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JmwbA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ur2gV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ur2gV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/crjRw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/crjRw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15869" LastEditorUserId="15869" LastEditDate="2018-10-17T18:33:41.837" LastActivityDate="2018-10-22T11:05:45.523" Title="NVIDIA Gforce 150 MX - Can't find it on the list" Tags="|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16462" PostTypeId="1" CreationDate="2018-10-17T19:10:42.053" Score="0" ViewCount="65" Body="&lt;p&gt;While inside the terminal I cannot press Ctrl+G. This is painful inside Emacs as it is the keybinding for cancelling a command. I believe it is bound to something else inside the terminal. How do I disable that or is it a bug?&lt;/p&gt;&#xA;" OwnerUserId="15872" LastActivityDate="2018-12-18T13:01:19.667" Title="Control+G inside terminal is not functioning correctly" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16463" PostTypeId="1" AcceptedAnswerId="16472" CreationDate="2018-10-17T19:16:44.790" Score="3" ViewCount="2329" Body="&lt;p&gt;I am trying to reach the Software Sources. &#xA;Where has this functionality has been moved to in Juno?&#xA;Or is it completely removed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="10465" LastActivityDate="2018-10-17T21:21:59.070" Title="Software Sources in Juno" Tags="|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16464" PostTypeId="1" AcceptedAnswerId="16471" CreationDate="2018-10-17T19:20:52.780" Score="0" ViewCount="263" Body="&lt;p&gt;I have a pc with three logical partitions. I have windows 10 and Ubuntu 18.04 installed on two of them. I am planning on wiping the Ubuntu partition to install elementary OS Juno to try it out, is it going to affect any other partitions or such?&lt;/p&gt;&#xA;" OwnerUserId="15873" LastActivityDate="2018-10-17T21:11:40.307" Title="Will installing elementary OS Juno going to wipe data on other drives?" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16467" PostTypeId="1" CreationDate="2018-10-17T19:38:36.330" Score="4" ViewCount="454" Body="&lt;p&gt;I just installed elementary OS 5 Juno and realized that middle click pasting of marked text does not work in native apps anymore. In other apps, however, it works!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tested the following applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works in:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Firefox&lt;/li&gt;&#xA;&lt;li&gt;Thunderbird&lt;/li&gt;&#xA;&lt;li&gt;Spotify&lt;/li&gt;&#xA;&lt;li&gt;LibreOffice Writer&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Doesn't work in:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Code&lt;/li&gt;&#xA;&lt;li&gt;Terminal&lt;/li&gt;&#xA;&lt;li&gt;Music&lt;/li&gt;&#xA;&lt;li&gt;Photos&lt;/li&gt;&#xA;&lt;li&gt;AppCenter&lt;/li&gt;&#xA;&lt;li&gt;App menu (is it called slingshot?)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All tests were done with mouse and trackpad. Middle click in mouse settings was enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this or where I could file a bug report, since this seems to affect multiple apps?&lt;/p&gt;&#xA;" OwnerUserId="6463" LastActivityDate="2019-03-05T09:18:59.353" Title="Middle click pasting does not working in native apps" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16468" PostTypeId="1" AcceptedAnswerId="16474" CreationDate="2018-10-17T19:51:18.823" Score="1" ViewCount="1117" Body="&lt;p&gt;There used to be a setting in Plank settings to hide the unpinned apps, super useful. I cannot find it any more.&#xA;Has it been moved in Juno, or removed?&#xA;Thanks a lot!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: including a screenshot of my settings page for the dock. Most settings are gone in this release and it makes me a little frustrated.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vrBn5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vrBn5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason why I'd hide some apps is to have things like widgets stay on the desktop, without appearing in the Plank. In the attached screenshot, see the bottom right end of the Plank: three extra icons from the widgets that I use at the moment.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0ulGR.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0ulGR.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10465" LastEditorUserId="10465" LastEditDate="2018-10-18T15:28:53.107" LastActivityDate="2018-10-18T15:39:16.163" Title="Hiding running apps in Plank in Juno" Tags="|plank|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16469" PostTypeId="1" CreationDate="2018-10-17T19:59:36.050" Score="1" ViewCount="2283" Body="&lt;p&gt;I have just installed Juno but cannot update.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;[sudo] password for cipeos:        &#xA;Sorry, try again.&#xA;[sudo] password for cipeos:       &#xA;Ign:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu juno InRelease&#xA;Hit:2 http://fr.archive.ubuntu.com/ubuntu bionic InRelease          &#xA;Hit:3 http://security.ubuntu.com/ubuntu bionic-security InRelease                              &#xA;Ign:4 http://packages.elementary.io/appcenter juno InRelease                                   &#xA;Hit:5 http://fr.archive.ubuntu.com/ubuntu bionic-updates InRelease                             &#xA;Ign:6 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu juno InRelease                 &#xA;Hit:7 http://fr.archive.ubuntu.com/ubuntu bionic-backports InRelease    &#xA;Err:8 http://packages.elementary.io/appcenter juno Release                                         &#xA;  404  Not Found [IP: 104.28.5.44 80]&#xA;Err:9 http://ppa.launchpad.net/elementary-os/stable/ubuntu juno Release                            &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu juno Release &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done                      &#xA;E: The repository 'http://packages.elementary.io/appcenter juno Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu juno Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu juno Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-10-17T20:06:26.467" LastActivityDate="2019-09-19T16:04:10.520" Title="Juno sources - no release file" Tags="|updates|apt|release-juno|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16471" PostTypeId="2" ParentId="16464" CreationDate="2018-10-17T20:59:31.317" Score="0" Body="&lt;p&gt;You will have to chose the good option and take care during installation: selecting the last option in that list - the one that allows you to access and administer partitions - namely: &quot;Something else&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ftU3z.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ftU3z.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There, you can select the partition you want for elementary, and it will be installed there - and only there. Nothing else will be touched, unless you decide otherwise.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also &lt;a href=&quot;https://elementaryos.stackexchange.com/q/2476/170&quot;&gt;here&lt;/a&gt; on elementaryos.stackexchange.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; tutorial for Luna is still valid, the installer is the same.&lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-10-17T21:11:40.307" LastActivityDate="2018-10-17T21:11:40.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16472" PostTypeId="2" ParentId="16463" CreationDate="2018-10-17T21:21:59.070" Score="4" Body="&lt;p&gt;Yes, removed, but can be installed - as already mentioned &lt;a href=&quot;https://elementaryos.stackexchange.com/a/7869/170&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Let's hope the rest will work great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's called &lt;em&gt;Software and Updates&lt;/em&gt; and can be found as such by the launcher. &lt;/p&gt;&#xA;" OwnerDisplayName="user170" LastActivityDate="2018-10-17T21:21:59.070" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16474" PostTypeId="2" ParentId="16468" CreationDate="2018-10-17T21:31:04.270" Score="2" Body="&lt;p&gt;In the question the OP is referring to the &lt;em&gt;Desktop&gt;Dock&lt;/em&gt; settings, which do not include what is asked (did they ever?).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The option is accessible under the &lt;strong&gt;Plank preferences&lt;/strong&gt;, which are independent from the system settings. Plank preferences are accessible in different ways:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;press Ctrl-key and right-click Plank dock, then select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;run &lt;code&gt;plank --preferences&lt;/code&gt; in terminal.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Therefore this question might even be a duplicate of &lt;a href=&quot;https://elementaryos.stackexchange.com/q/7531/170&quot;&gt;this&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Un-check &quot;Show unpinned&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/g5qur.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g5qur.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-10-18T15:39:16.163" LastActivityDate="2018-10-18T15:39:16.163" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16475" PostTypeId="1" CreationDate="2018-10-17T21:46:21.453" Score="11" ViewCount="4607" Body="&lt;p&gt;is anybody else having this annoying issue with Firefox? &#xA;when I right-click the little window that pops-up clashes with the mouse, making it difficult to &lt;em&gt;choose&lt;/em&gt; what to select.&lt;/p&gt;&#xA;" OwnerUserId="13927" LastActivityDate="2019-07-27T16:54:34.827" Title="Firefox right click issue" Tags="|firefox|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16476" PostTypeId="2" ParentId="16431" CreationDate="2018-10-17T23:53:29.120" Score="0" Body="&lt;p&gt;solution &#xA;Google Drive GUI for Windows / Mac / Linux&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://liberodark.github.io/ODrive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://liberodark.github.io/ODrive/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10558" LastActivityDate="2018-10-17T23:53:29.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16477" PostTypeId="1" AcceptedAnswerId="16481" CreationDate="2018-10-18T02:03:35.813" Score="1" ViewCount="1161" Body="&lt;p&gt;I'm new to elementary OS, I was using Linux Mint and now I'm moved to elementary OS since Juno was released.. I often use ctrl + w for close window in Linux Mint (It's default on Linux Mint), can I use this shortcut in Juno for close window? because when I see keyboard setting I dont have &quot;Close Window&quot; command in the list..&lt;/p&gt;&#xA;" OwnerUserId="15878" LastActivityDate="2018-10-18T12:15:45.023" Title="ctrl + w for close window?" Tags="|settings|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16478" PostTypeId="2" ParentId="16459" CreationDate="2018-10-18T03:21:17.873" Score="0" Body="&lt;p&gt;Go to the App Center and install Software &amp;amp; Updates first if not installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add the Proprietary GPU Drivers PPA  and update the software sources, use the following commands in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;close the terminal and reopen Software &amp;amp; Updates then click on Additional Drivers tab it will now search for the correct drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps&lt;/p&gt;&#xA;" OwnerUserId="15879" LastActivityDate="2018-10-18T03:21:17.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16479" PostTypeId="1" CreationDate="2018-10-18T03:35:07.673" Score="1" ViewCount="450" Body="&lt;p&gt;There really isn't much more I can describe besides my fresh Juno install is freezing when the system Idles for around 15 minutes or longer. I had a stable loki install before doing a clean wipe and re install when Juno dropped. I've got an rx480 gpu but am using the integrated drivers. Not sure where to start...&lt;/p&gt;&#xA;" OwnerUserId="15881" LastActivityDate="2018-11-12T13:41:55.427" Title="Juno Freezing After Idle" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16480" PostTypeId="1" CreationDate="2018-10-18T06:27:39.203" Score="0" ViewCount="199" Body="&lt;p&gt;I just installed Elemetary OS 5.0 Juno. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Roboto Medium is listed in the &lt;strong&gt;Fonts&lt;/strong&gt; application, but this font is not available in LibreOffice Writer! Why?&lt;/p&gt;&#xA;" OwnerUserId="15883" LastActivityDate="2024-03-26T03:05:27.537" Title="Font missing in LibreOffice Writer" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16481" PostTypeId="2" ParentId="16477" CreationDate="2018-10-18T06:42:20.533" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Ctrl-W&lt;/strong&gt;  - is normally the &lt;strong&gt;close-tab&lt;/strong&gt; short-key, and it works in tabbed apps like browsers and file managers, the last-tab closed closing the program or defaulting to the startup tab; Files stays open when last tab is closed (a setting that can be also enabled in Firefox: &lt;code&gt;about:config&lt;/code&gt;, then set &lt;code&gt;browser.tabs.closeWindowWithLastTab&lt;/code&gt; to &lt;code&gt;false&lt;/code&gt;).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Ctrl-T&lt;/strong&gt; - is the complementary to the above: the &lt;strong&gt;open-new-tab&lt;/strong&gt; short-key. The Juno terminal will not follow these two shortcuts thought.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;And there is the universal &lt;strong&gt;Alt-F4&lt;/strong&gt; that applies to &lt;strong&gt;all&lt;/strong&gt; windows whatsoever.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Ctrl-Q&lt;/strong&gt; - operates like the above, closing &lt;strong&gt;all&lt;/strong&gt; windows - with very rare exceptions: Epiphany, mentioned in @JayAurabind's comment.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user170" LastEditorDisplayName="user170" LastEditDate="2018-10-18T12:15:45.023" LastActivityDate="2018-10-18T12:15:45.023" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16482" PostTypeId="1" AcceptedAnswerId="16483" CreationDate="2018-10-18T07:13:28.590" Score="4" ViewCount="9595" Body="&lt;p&gt;now as Juno (0.5) is stable and released, how can one update from loki? I only find questions regarding the beta release. Is there a way to perform the update with apt? Is is save to edit the sources.list?&lt;/p&gt;&#xA;" OwnerUserId="15888" LastActivityDate="2022-05-08T17:19:22.580" Title="Update from Loki to Juno stable?" Tags="|release-loki|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16483" PostTypeId="2" ParentId="16482" CreationDate="2018-10-18T07:33:01.567" Score="9" Body="&lt;p&gt;While the &amp;quot;suggested&amp;quot; upgrade path is to install Juno from scratch,&#xA;and if you have your &lt;code&gt;/home&lt;/code&gt; as a separate partiton might be the &lt;em&gt;best&lt;/em&gt; method to be safe, I've just updated both my PCs with the &lt;code&gt;apt&lt;/code&gt; method and all went well.&lt;/p&gt;&#xA;&lt;p&gt;Since Juno is based on Ubuntu 18.04 (&lt;code&gt;bionic&lt;/code&gt;) while Loki in based on 16.04 (&lt;code&gt;xenial&lt;/code&gt;)&#xA;it was a simple matter of substituting all occurrences of &lt;code&gt;xenial&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; on &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and &lt;code&gt;/etc/apt/sources.list.d/*.list&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The exact procedure was:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Copied in a backup directory all custom files on &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; (i.e. all files but &lt;code&gt;appcenter.list&lt;/code&gt;, &lt;code&gt;elementary.list&lt;/code&gt; and &lt;code&gt;patches.list&lt;/code&gt;) which are &lt;em&gt;custom&lt;/em&gt; sources with specific mods for elementaryOS. These need to be update along with &amp;quot;standard&amp;quot; Ubuntu packages;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Made sure my system was up to date (&lt;code&gt;sudo apt update&lt;/code&gt; and &lt;code&gt;sudo apt dist-upgrade&lt;/code&gt;) before editing my source files;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;em&gt;Removed&lt;/em&gt; my custom lists from &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; (of which I had a backup copy as per #1). For example I have custom sources for Google Chrome, &lt;code&gt;wine&lt;/code&gt;, &lt;code&gt;virtualbox&lt;/code&gt;, etc. which are neither in standar Ubuntu repos nor in elementary OS ones;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Substituted all occurrences of &lt;code&gt;xenial&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; (i.e. &lt;code&gt;sudo sed 's/xenial/bionic/' -i /etc/apt/sources.list&lt;/code&gt; and &lt;code&gt;sudo sed 's/xenial/bionic/' -i /etc/apt/sources.list.d/*.list&lt;/code&gt;;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Log out from graphical system (just to be safe, it &lt;em&gt;might&lt;/em&gt; work even logged into the graphical desktop);&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a console terminal (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;);&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Logged in and shut down graphical system (&lt;code&gt;sudo systemctl stop lightdm&lt;/code&gt;);&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Upgraded my system:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Rebooted and checked that all went well;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restored all my custom sources in &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; (and substituted &lt;code&gt;xenial&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; where applicable);&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Another pass of: &lt;code&gt;sudo apt-get update&lt;/code&gt; and &lt;code&gt;sudo apt-get dist-upgrade&lt;/code&gt; to upgrade all the software which came from custom sources.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; was complaining of a missing GPG key during the &lt;code&gt;sudo apt update&lt;/code&gt; at #8:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Err:4 http://packages.elementary.io/appcenter bionic InRelease                       &#xA;  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A74F73EFFE70B91C&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;which was resolved with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys A74F73EFFE70B91C&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also, on one of my PCs, I had a conflict with the package &lt;code&gt;linux-tools-4.15.0-36-generic&lt;/code&gt; which I resolved with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get purge linux-hwe-tools-4.15.0-36 linux-tools-generic-hwe-16.04 linux-tools-4.15.0-36-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then resumed the upgrade with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt --fix-broken install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;A final touch was:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove --purge&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to remove unused/obsoleted packages.&lt;/p&gt;&#xA;&lt;p&gt;Obviously, if you choose to follow this path (and if you choose to install Juno from scratch, too) it's &lt;em&gt;always&lt;/em&gt; a good idea to have a full backup of your system. Well, it should be a good idea to have an up to date backup of your data even if &lt;em&gt;not&lt;/em&gt; upgrading.&lt;/p&gt;&#xA;&lt;p&gt;A little annoyance was that Juno completely dropped support for &amp;quot;system tray icons&amp;quot;. This has &lt;strong&gt;nothing&lt;/strong&gt; to do with the upgrade, it's a &amp;quot;feature&amp;quot; of Juno, and I was a little surprised that, for example, Dropbox icon wasn't showing. Again, it has &lt;strong&gt;nothing&lt;/strong&gt; to do with the upgrade, and &lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;there's a workaround&lt;/a&gt; which works for fresh installs, too.&lt;/p&gt;&#xA;" OwnerUserId="12279" LastEditorUserId="12279" LastEditDate="2022-05-08T17:19:22.580" LastActivityDate="2022-05-08T17:19:22.580" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="16487" PostTypeId="1" CreationDate="2018-10-18T10:21:56.930" Score="4" ViewCount="1626" Body="&lt;p&gt;Elementary OS Juno. Dell Inspiron 5767.&#xA;I try to prevent my laptop from suspend after some time of inactivity. I choose &quot;Never&quot; in both Plugged In and On Battery, but Laptop still suspend after some time. And it cannot connect to my wifi network after wake up so I need to reboot laptop every time. Is there any other ways to change this option?&lt;/p&gt;&#xA;" OwnerUserId="15895" LastActivityDate="2020-04-09T09:30:40.120" Title="Power Setting doesnt work" Tags="|wifi|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16488" PostTypeId="1" CreationDate="2018-10-18T10:32:22.897" Score="2" ViewCount="277" Body="&lt;p&gt;Folks,&#xA;just installed my working laptop (HP Folio 9470m) with Elementary Juno simply because so far it seems the most well-crafted desktop distribution around these days, however pretty quickly I run into a peculiar issue: On my device, dual-screen setup with an external monitor and the device in a docking station doesn't work. What happens is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Initial issue: I can't disable the laptop display. Though I can &quot;turn it off&quot; in the elementary monitor settings, it still stays on and apparently also active. &lt;/li&gt;&#xA;&lt;li&gt;Worse: If I close the laptop lid (to still disable the unused display) and lock my session, the unlock screen always will be on the laptop display and completely ignore my external monitor.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This is &lt;em&gt;rather&lt;/em&gt; strange. I very well could live with the laptop display not deactivated, but the unlock screen (as well as the login screen) should be on the primary display. Is there some way to set things up just like this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance and all the best,&#xA;Kristian&lt;/p&gt;&#xA;" OwnerUserId="15896" LastActivityDate="2018-10-18T10:32:22.897" Title="Dual display issues on HP laptop?" Tags="|laptop|hp|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16489" PostTypeId="2" ParentId="16469" CreationDate="2018-10-18T10:43:24.810" Score="3" Body="&lt;p&gt;I fix this replacing &lt;code&gt;juno&lt;/code&gt; for &lt;code&gt;bionic&lt;/code&gt; on &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/apt/sources.list.d/appcenter.list&#xA;/etc/apt/sources.list.d/patches.list &#xA;/etc/apt/sources.list.d/elementary.list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to find this list of files you can use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo grep -R juno /etc/apt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="10586" LastEditorUserId="16469" LastEditDate="2018-11-30T20:07:01.907" LastActivityDate="2018-11-30T20:07:01.907" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16491" PostTypeId="1" CreationDate="2018-10-18T12:26:55.930" Score="0" ViewCount="867" Body="&lt;p&gt;Since the installation of Juno, the time that appears on the logon screen is in English format (AM/PM), while French is the language defined in the settings, and the time and date are displayed correctly everywhere else. Is there a setting to fix this, or maybe it's a bug ? &lt;/p&gt;&#xA;" OwnerUserId="15900" LastActivityDate="2019-04-21T06:02:20.397" Title="Logon screen in elementary OS Juno" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16493" PostTypeId="1" CreationDate="2018-10-18T12:52:46.733" Score="2" ViewCount="2732" Body="&lt;p&gt;when i try to connect my hp PSC 1400 printer to juno, i get the error &quot;cups missing filter warning&quot;, while in Loki everything went good. I noticed that when i try to add the PSC 1400 driver from the options, there are many drivers all with the same name.&lt;/p&gt;&#xA;" OwnerUserId="15901" LastActivityDate="2019-06-07T09:20:47.343" Title="Juno printer error: cups missing filter warning" Tags="|printer|hp|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16494" PostTypeId="2" ParentId="16441" CreationDate="2018-10-18T12:55:16.283" Score="1" Body="&lt;p&gt;Hey I had the same question!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed STEAM instead of STEAM Installer.&#xA;It worked just fine, logged in, installed games, selected steam play + proton and running games, really happy about it :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it works for u too&lt;/p&gt;&#xA;" OwnerUserId="15869" LastActivityDate="2018-10-18T12:55:16.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16496" PostTypeId="1" CreationDate="2018-10-18T13:16:39.427" Score="1" ViewCount="275" Body="&lt;p&gt;I just installed Juno. I copied over my music files and apparently some of them were missing track information because they weren't getting grouped together (by album and artist). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I right-clicked on the music files, selected &quot;Edit Song Info...&quot; and added the missing track information. Clicked &quot;Save&quot;, but it didn't save because if I went back to the track information, it was still missing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installed Rhythmbox and I was able to save the missing track information.  As soon as I changed the information there, Rhythmbox would automatically re-organize it and group it properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Went back into Music (Noise), but it didn't pick up the new information. Some of the music file were still saying &quot;unknown artist&quot; or &quot;unknown album&quot;. Tried removing and the re-adding them to the library, but that didn't change anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So...&#xA;1) Why isn't Music saving track information?&#xA;2) Why doesn't Music pick up the changes automatically and reload the Music files when the changes were made by another program?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Aside from these issues, I like Noise. It comes close to the look and feel of Banshee which would be my favorite player if it was still supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I had an old laptop with Freya installed on it. I can edit music files with Music there. I have a VM with Loki and I could edit music files there too. Just can't edit them on Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE#2: I found the answer to my second question about how to get Music to pick up changes. I found that here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/302/how-do-i-force-noise-to-rescan-my-music-library?rq=1&quot;&gt;How do I force Noise to rescan my music library?&lt;/a&gt;&#xA;But I still don't know why Music doesn't save any changes made to track information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE #3: Someone just opened up an issue on this:&#xA;&lt;a href=&quot;https://github.com/elementary/music/issues/451&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/music/issues/451&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might also be a related issue:&#xA;&lt;a href=&quot;https://github.com/elementary/music/issues/156&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/music/issues/156&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-14T03:14:31.230" LastActivityDate="2018-11-14T03:14:31.230" Title="Music (Noise) doesn't save track information" Tags="|release-juno|music|audio|audio-player|" AnswerCount="0" CommentCount="0" ClosedDate="2019-02-20T16:02:09.627" ContentLicense="CC BY-SA 4.0" />
  <row Id="16502" PostTypeId="1" AcceptedAnswerId="16503" CreationDate="2018-10-18T14:12:22.650" Score="11" ViewCount="9098" Body="&lt;p&gt;I made a fresh install of ElementaryOS 5.0 Juno (used to be running 0.4.1 Loki) and everything but one thing seems to work just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the top bar, were the keyboard layout, sound, connection, bell and power button are, used to be Steam and Discord icons when these programs where running, but now they aren't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o3fOZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o3fOZ.png&quot; alt=&quot;As you can see, both Discord and Steam are running, but no icons are shown before the &amp;quot;ch&amp;quot;&quot;&gt;&lt;/a&gt; As you can see, both Discord and Steam are running, but no icons are shown before the &quot;ch&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I get them back?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Edit: typos]&lt;/p&gt;&#xA;" OwnerUserId="15905" LastEditorUserId="15905" LastEditDate="2019-05-31T16:25:58.233" LastActivityDate="2021-11-09T22:24:40.133" Title="Missing icons in the wingpanel" Tags="|wingpanel|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16503" PostTypeId="2" ParentId="16502" CreationDate="2018-10-18T14:22:47.293" Score="16" Body="&lt;p&gt;Sadly, with Loki &lt;a href=&quot;https://github.com/elementary/wingpanel/issues/96&quot; rel=&quot;noreferrer&quot;&gt;support for system tray icons based on Ayatana Indicators was obsoleted&lt;/a&gt; and definitively dropped in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found &lt;a href=&quot;https://www.linuxuprising.com/2018/08/how-to-re-enable-ayatana-appindicators.html&quot; rel=&quot;noreferrer&quot;&gt;a nice article&lt;/a&gt; which gives a workaround (tested working on my PCs).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the basic steps:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Make &lt;code&gt;indicator-application&lt;/code&gt; recognise &lt;code&gt;Pantheon&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.config/autostart&#xA;cp /etc/xdg/autostart/indicator-application.desktop ~/.config/autostart/&#xA;sed -i 's/^OnlyShowIn.*/OnlyShowIn=Unity;GNOME;Pantheon;/' ~/.config/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Dowload latest available release of &lt;code&gt;wingpanel-indicator-ayatana&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/w/wingpanel-indicator-ayatana/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You might want to take a look at all the packages in &lt;code&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/w/wingpanel-indicator-ayatana/&lt;/code&gt; and select the correct one for your architecture.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Logout/Login (&lt;em&gt;might&lt;/em&gt; be not needed, but just in case).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12279" LastEditorUserId="12279" LastEditDate="2019-02-23T15:33:41.733" LastActivityDate="2019-02-23T15:33:41.733" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16504" PostTypeId="1" CreationDate="2018-10-18T14:32:13.417" Score="0" ViewCount="263" Body="&lt;p&gt;On Loki I have the same problem with several applications which involve a file dialogue. When I select a file there is no way to 'Save', as there is no button to click, [Enter] doesn't work and (double-)left-click doesn't work. Could you look at the picture below and tell me whether there is a button missing from this standard file dialogue? Perhaps a header bar is missing that should have Save, Cancel and Search buttons.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/arJmO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/arJmO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2018-10-19T17:07:21.127" LastActivityDate="2024-03-22T07:07:20.897" Title="File Dialogue Doesn't Work" Tags="|release-loki|applications|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16505" PostTypeId="1" CreationDate="2018-10-18T14:41:59.667" Score="0" ViewCount="208" Body="&lt;p&gt;I would like to launch this simple oneliner in terminal, but from app launcher.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl wttr.in/bydgoszcz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It just shows nice weather report, like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MY0tz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MY0tz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found out that it is possible to launch a terminal from the script and make it launch a command, with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;exec io.elementary.terminal -e &quot;curl wttr.in/bydgoszcz&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But this way the output gest strangely corrupted (notice where the &lt;code&gt;user@machine&lt;/code&gt; line lands):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/t7QKD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t7QKD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Its just like if the weather report command gets executed too fast. Is there a way to maybe delay it somehow, so the &lt;code&gt;user@machine&lt;/code&gt; line goes first, and then goes the report, just like in the #1 image&lt;/p&gt;&#xA;" OwnerUserId="9974" LastActivityDate="2018-11-18T05:04:31.497" Title="Launching a command in terminal from the app launcher" Tags="|pantheon-terminal|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16506" PostTypeId="2" ParentId="16397" CreationDate="2018-10-18T14:42:14.347" Score="0" Body="&lt;p&gt;Solved this using those commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;VBoxClient --draganddrop&#xA;VBoxClient --clipboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4943" LastActivityDate="2018-10-18T14:42:14.347" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16507" PostTypeId="1" AcceptedAnswerId="16515" CreationDate="2018-10-18T15:01:10.660" Score="0" ViewCount="526" Body="&lt;p&gt;Just installed Juno today and for some reason neither &lt;code&gt;pantheon-files&lt;/code&gt; nor &lt;code&gt;sudo pantheon-files-pkexec&lt;/code&gt; work anymore. Does anyone know how one can launch pantheon-files through the terminal now? Thanks&lt;img src=&quot;https://i.stack.imgur.com/AFfz6.png&quot; alt=&quot;![enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="6023" LastEditorUserId="16827" LastEditDate="2019-05-08T07:43:57.050" LastActivityDate="2019-05-08T07:43:57.050" Title="Can't launch Pantheon Files from terminal" Tags="|release-juno|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16508" PostTypeId="1" CreationDate="2018-10-18T15:14:01.347" Score="0" ViewCount="244" Body="&lt;p&gt;When I try to (simple) download it, I just get a file manager screen - no clue about what I'm supposed to do. Click or [Enter] don't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TPpkH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TPpkH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other option &quot;Magnet Link&quot; says it requires software installation. There is no mention of it in the AppStore or the installation advice here &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2018-10-18T21:21:13.640" LastActivityDate="2018-10-18T22:09:55.473" Title="Impossible to Download ISO - JUNO Beta" Tags="|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16510" PostTypeId="1" AcceptedAnswerId="16611" CreationDate="2018-10-18T15:51:01.817" Score="2" ViewCount="650" Body="&lt;p&gt;I'm new on this forum and I'm writing because since I upgraded to Juno (via clean installation), I'm not able to see the multitasking-view application icon. Instead of the right icon I see the default one as you can see from the image.&#xA;How can I solve it? &#xA;Thanks to all &lt;a href=&quot;https://i.stack.imgur.com/Mk93l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mk93l.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15906" LastEditorUserId="15906" LastEditDate="2018-10-18T16:13:52.657" LastActivityDate="2018-11-09T00:59:50.253" Title="Multitasking-view icon problem" Tags="|multitasking-view|" AnswerCount="2" CommentCount="2" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16512" PostTypeId="1" CreationDate="2018-10-18T16:05:08.283" Score="1" ViewCount="570" Body="&lt;p&gt;In Juno Beta 2 night mode worked as intended. I've performed a clean installation of the stable release, now night mode does not respond at all. Using an Inspiron 3558. I can see the night mode icon appear in the task bar, have tried rebooting and toggling on/off - nothing seems to kick it on.&lt;/p&gt;&#xA;" OwnerUserId="15907" LastEditorUserId="15904" LastEditDate="2018-12-28T13:41:56.030" LastActivityDate="2019-01-27T17:02:35.563" Title="Night mode not enabling" Tags="|display|release-juno|pantheon|nightlight|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16513" PostTypeId="1" CreationDate="2018-10-18T16:36:53.927" Score="0" ViewCount="92" Body="&lt;p&gt;Two issues after installing Juno:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Unable To Connect to Some Apple Input Devices;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;2.Unable To Delete One Apple wireless keyboard from Bluetooth Settings so that I can try to reconnect it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using information found elsewhere on SE I have used terminal to stop and restart bluetooth, then restarted. Same issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have successfully connected to a Magic Mouse [in Juno], and was successful in connecting an Apple Magic Mouse and an Apple wireless keyboard in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a late 2009 iMac. (Was using this same machine for Loki.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for insights.&lt;/p&gt;&#xA;" OwnerUserId="15876" LastActivityDate="2019-08-24T23:01:20.163" Title="Unable To Connect to Some Apple Input Devices/Unable To Delete One Apple KB from BT Settings" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16514" PostTypeId="1" AcceptedAnswerId="17583" CreationDate="2018-10-18T17:15:13.690" Score="2" ViewCount="1144" Body="&lt;p&gt;I've just upgraded to Juno and I'm having some troubles with keyboard layout switching. When I try to switch layout (from US to RU and vice versa) with &lt;code&gt;Alt+Shift&lt;/code&gt; shortcut it actually switches only after ~1 second delay. It gets really annoying while typesetting documents with two languages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember fixing this somehow on Loki, but now I can't figure out how to do it.&lt;/p&gt;&#xA;" OwnerUserId="15910" LastEditorUserId="84" LastEditDate="2021-07-27T21:15:40.790" LastActivityDate="2021-07-27T21:15:40.790" Title="Keyboard layout switch delay" Tags="|keyboard-shortcuts|keyboard-layout|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16515" PostTypeId="2" ParentId="16507" CreationDate="2018-10-18T17:39:38.653" Score="3" Body="&lt;p&gt;The required commands are now &lt;code&gt;io.elementary.files&lt;/code&gt; and &lt;code&gt;io.elementary.files-pkexec&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The native apps are being moved to the &lt;em&gt;io.elementary&lt;/em&gt; namespace to avoid ambiguities.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="16827" LastEditDate="2019-05-08T06:41:49.500" LastActivityDate="2019-05-08T06:41:49.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16519" PostTypeId="1" CreationDate="2018-10-18T20:46:43.890" Score="12" ViewCount="11044" Body="&lt;p&gt;In power settings, suspend is disabled. However, the PC still goes into a suspend state after approximately 30 minutes. This behavior does not happen under Ubuntu Budgie on another SSD in the same PC. This is a desktop, not a laptop.  Is the behavior intended, or is there a way to disable this that I'm not finding?&lt;/p&gt;&#xA;" OwnerUserId="15916" LastActivityDate="2020-01-16T06:50:08.293" Title="Elementary OS ignoring suspend disable" Tags="|settings|system|release-juno|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16522" PostTypeId="2" ParentId="16508" CreationDate="2018-10-18T22:09:55.473" Score="1" Body="&lt;p&gt;To download using the magnet link you need an app like qBitorrent. You can easily install it with &lt;code&gt;sudo apt install qbitorrent&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regarding your other issue. It's probably related to your web browser. You should try with another one.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-18T22:09:55.473" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16523" PostTypeId="2" ParentId="16505" CreationDate="2018-10-18T22:29:01.757" Score="0" Body="&lt;p&gt;This is not the answer you were looking for but... Why do all of this when you can install a web app and click a icon on the Applications launcher?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just open Epiphany and go to &lt;a href=&quot;http://wttr.in/bydgoszcz&quot; rel=&quot;nofollow noreferrer&quot;&gt;wttr.in/bydgoszcz&lt;/a&gt;. Then press the gear button and select &quot;Install Site as Web Application&quot;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2N8bD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2N8bD.png&quot; alt=&quot;Image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the app is available with just a click from the launcher!&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-18T22:29:01.757" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16524" PostTypeId="2" ParentId="16504" CreationDate="2018-10-18T23:34:29.917" Score="0" Body="&lt;p&gt;'Pantheon-files' had no header bar so no 'Cancel', 'Save' or 'Search' buttons! I removed 'pantheon-files' and installed 'Nautilus' which fixed it. I have since installed Juno - which had the same problem and the same solution.&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2018-10-19T16:06:00.137" LastActivityDate="2018-10-19T16:06:00.137" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16526" PostTypeId="1" CreationDate="2018-10-19T01:52:37.420" Score="4" ViewCount="1183" Body="&lt;p&gt;I can't run any fullscreen video on my second monitor. I tried with youtube on google chrome, netflix on firefox and vlc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on why?&lt;/p&gt;&#xA;" OwnerUserId="15005" LastActivityDate="2018-12-16T23:02:10.463" Title="Unable to fullscreen video on second monitor" Tags="|display|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16530" PostTypeId="1" AcceptedAnswerId="16672" CreationDate="2018-10-19T06:29:55.827" Score="0" ViewCount="366" Body="&lt;p&gt;Asus Z97-A motherboard, secure boot off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing eOS on a dedicated SSD. Windows resides on another separate SSD. Other drives around which contain data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First install would copy the files then stop at the dreaded &quot;cannot install grub&quot; error, neither on the eOS target drive, or on the Windows drive. I restarted, reformatted the destination drive, partitioned with a 50MB EFI partition and a 10MB Grub partition, / and swap. Install went fine, grub install raised no issues. Grub is now installed on the same drive as Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First reboot would go straight into eOS, no Grub menu. Tried with boot-repair USB drive, and it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;SFS detected. You may want to retry after converting Windows dynamic partitioning (SFS partitions) to a basic disk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot again, F8 to bring the motherboard's boot menu up. Select Windows drive, log in, check if any of the drives is in Dynamic mode, none of them is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out, back into Elementary, issue an update-grub, it seems ok.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install TestDisk, check partitions, on the Windows drive the boot partition is marked as a regular NTFS, not a Dynamic Disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm baffled now. Should I try to reinstall grub on a separate drive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can post and fdisk -l one I get back home.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;Generating grub configuration file ...&#xA;Found linux image: /boot/vmlinuz-4.15.0-36-generic&#xA;Found initrd image: /boot/initrd.img-4.15.0-36-generic&#xA;error: invalid volume.&#xA;grub-probe: error: cannot find a GRUB drive for /dev/sda1.  Check your device.map.&#xA;Adding boot menu entry for EFI firmware configuration&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sfdisk -l&#xA;&#xA;Disk /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 sectors&#xA;Units: sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 512 bytes&#xA;I/O size (minimum/optimal): 512 bytes / 512 bytes&#xA;Disklabel type: dos&#xA;Disk identifier: 0xb501c40d&#xA;&#xA;Device     Boot Start        End    Sectors   Size Id Type&#xA;/dev/sda1          63 1953523119 1953523057 931,5G 42 SFS&#xA;&#xA;&#xA;Disk /dev/sdb: 238,5 GiB, 256060514304 bytes, 500118192 sectors&#xA;Units: sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 512 bytes&#xA;I/O size (minimum/optimal): 512 bytes / 512 bytes&#xA;Disklabel type: dos&#xA;Disk identifier: 0x3c87fd1e&#xA;&#xA;Device     Boot     Start       End   Sectors   Size Id Type&#xA;/dev/sdb1  *         2048   1026047   1024000   500M  7 HPFS/NTFS/exFAT&#xA;/dev/sdb2         1026048 499135755 498109708 237,5G  7 HPFS/NTFS/exFAT&#xA;/dev/sdb3       499136512 500113407    976896   477M 27 Hidden NTFS WinRE&#xA;&#xA;&#xA;Disk /dev/sdc: 119,2 GiB, 128035676160 bytes, 250069680 sectors&#xA;Units: sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 4096 bytes&#xA;I/O size (minimum/optimal): 4096 bytes / 4096 bytes&#xA;Disklabel type: gpt&#xA;Disk identifier: 365DFA1E-9F1E-41B6-A495-C30B6F1CA4AB&#xA;&#xA;Device       Start       End   Sectors   Size Type&#xA;/dev/sdc1  4040704   4139007     98304    48M EFI System&#xA;/dev/sdc2    20480     40959     20480    10M BIOS boot&#xA;/dev/sdc3    40960   4040703   3999744   1,9G Linux swap&#xA;/dev/sdc4  4139008 250068991 245929984 117,3G Linux filesystem&#xA;&#xA;Partition table entries are not in disk order.&#xA;&#xA;&#xA;Disk /dev/sdd: 223,6 GiB, 240057409536 bytes, 468862128 sectors&#xA;Units: sectors of 1 * 512 = 512 bytes&#xA;Sector size (logical/physical): 512 bytes / 512 bytes&#xA;I/O size (minimum/optimal): 512 bytes / 512 bytes&#xA;Disklabel type: gpt&#xA;Disk identifier: C768B16A-F5D0-434E-9B17-86680256E78D&#xA;&#xA;Device     Start       End   Sectors   Size Type&#xA;/dev/sdd1   2048 468860927 468858880 223,6G Microsoft basic data&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15928" LastEditorUserId="15928" LastEditDate="2018-10-19T15:58:08.863" LastActivityDate="2018-10-23T13:14:13.510" Title="Grub issue after installing Elementary alongside Windows 10" Tags="|boot|grub|microsoft-windows|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16531" PostTypeId="2" ParentId="16445" CreationDate="2018-10-19T06:44:14.727" Score="0" Body="&lt;p&gt;Exactly the same here, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16488/dual-display-issues-on-hp-laptop&quot;&gt;Dual display issues on HP laptop?&lt;/a&gt; ... :| The worst thing about this really is that, no matter what I do, I can't get the unlock screen to appear on the primary display. &lt;/p&gt;&#xA;" OwnerUserId="15896" LastActivityDate="2018-10-19T06:44:14.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16532" PostTypeId="1" CreationDate="2018-10-19T07:08:52.897" Score="2" ViewCount="202" Body="&lt;p&gt;During installation process in Juno, there's no longer an option to encrypt my home folder. I wonder why is that?&lt;/p&gt;&#xA;" OwnerUserId="15929" LastEditorUserId="138" LastEditDate="2018-10-22T08:57:17.610" LastActivityDate="2018-10-22T08:57:17.610" Title="Where is &quot;encrypt my home folder&quot; in Juno?" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16534" PostTypeId="2" ParentId="16532" CreationDate="2018-10-19T07:32:15.737" Score="1" Body="&lt;p&gt;It was removed in Ubuntu 18.04. Now, you can encrypt the whole Elementary Installation, which is much saver ... i think.&lt;/p&gt;&#xA;" OwnerUserId="15903" LastActivityDate="2018-10-19T07:32:15.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16535" PostTypeId="1" CreationDate="2018-10-19T09:02:22.010" Score="0" ViewCount="209" Body="&lt;p&gt;This is what I see when I run &lt;code&gt;sudo apt-get update&lt;/code&gt; on terminal,   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; http://packages.elementary.io/appcenter/dists/bionic/InRelease  403  Forbidden [IP: 104.28.4.44 80]&#xA; E: El repositorio «http://packages.elementary.io/appcenter bionic InRelease» ya no está firmado.&#xA; N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA; N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15930" LastEditorUserId="16827" LastEditDate="2019-01-07T20:14:27.947" LastActivityDate="2019-01-07T20:14:27.947" Title="Unable to update the system using apt" Tags="|updates|system|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16536" PostTypeId="2" ParentId="13683" CreationDate="2018-10-19T11:07:48.213" Score="2" Body="&lt;p&gt;Try to install the latest linux kernel from the ubuntu repositories, that's an issue with the asus-laptop driver.&lt;/p&gt;&#xA;" OwnerUserId="15854" LastActivityDate="2018-10-19T11:07:48.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16537" PostTypeId="2" ParentId="10501" CreationDate="2018-10-19T11:29:20.640" Score="0" Body="&lt;p&gt;The easiest way is to configure the calendars using Evolution. Just install Evolution, add the calendars and afterwards you can remove Evolution again. Follow the steps as described here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/911567/how-to-sync-icloud-calendar#911568&quot;&gt;https://askubuntu.com/questions/911567/how-to-sync-icloud-calendar#911568&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look for the 2018 answer of @mniess. This worked like a charm for me. Calendars will automatically show up in elementary OS' default calendar app.&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2018-10-19T11:29:20.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16538" PostTypeId="2" ParentId="16462" CreationDate="2018-10-19T11:31:17.937" Score="2" Body="&lt;p&gt;I also ran into this problem as an emacs user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl-G does work but it's assigned to something else. I checked the source code (&lt;a href=&quot;https://github.com/elementary/terminal/blob/master/src/PantheonTerminalWindow.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal/blob/master/src/PantheonTerminalWindow.vala&lt;/a&gt;) and it turns out that Ctrl-G is used for &lt;code&gt;ACTION_SEARCH_NEXT&lt;/code&gt; You can see this behaviour if you click the little magnifying glass button in terminal's title bar and enter a search term. Pressing ctrl-g will jump to the next hit of the search term.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a quick and dirty fix, my plan is to disable the &lt;code&gt;ACTION_SEARCH_NEXT&lt;/code&gt; keybinding (maybe just comment it out) and recompile locally. Though I believe a bug should be filed. In my opinion, ctrl-g should only be mapped to &lt;code&gt;ACTION_SEARCH_NEXT&lt;/code&gt; when the search bar is active. By the way, this keybinding is used in other built apps such as Code and Epiphany.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another work-around for now would be to install another terminal emulator. eg: xterm.&lt;/p&gt;&#xA;" OwnerUserId="15933" LastActivityDate="2018-10-19T11:31:17.937" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16539" PostTypeId="1" CreationDate="2018-10-19T11:35:45.240" Score="1" ViewCount="848" Body="&lt;p&gt;in juno you can put the icons in the taskbar as in loki ?, example i install slack, discord, telegram... and the application icon does not come out. Any idea how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="15934" LastActivityDate="2018-10-27T01:04:44.320" Title="Taskbar icons in juno dont work" Tags="|icons|release-juno|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16540" PostTypeId="1" CreationDate="2018-10-19T11:55:09.390" Score="1" ViewCount="28" Body="&lt;p&gt;About a few days ago, I installed elementary OS on my Lenovo IdeaPad 110 laptop. I also have this monitor, (all the labels are worn off, so I can't identify) which I link using an HDMI to VGA cable. The issue is that the mouse creates some sort of trail, with also cutting off some of the page, and also creating some slowdown, but only if it's connected with HDMI. Is this a problem with my cord? My monitor? My laptop? &lt;/p&gt;&#xA;" OwnerUserId="15935" LastActivityDate="2018-10-19T11:55:09.390" Title="Strange Mouse Issue" Tags="|mouse|hdmi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16541" PostTypeId="2" ParentId="16539" CreationDate="2018-10-19T11:57:28.983" Score="1" Body="&lt;p&gt;Daniel, this has already been answered. Check out this thread:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16502/missing-icons-in-the-wingpanel?rq=1&quot;&gt;Missing icons in the wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-19T11:57:28.983" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16544" PostTypeId="1" AcceptedAnswerId="19082" CreationDate="2018-10-19T12:38:48.187" Score="7" ViewCount="13226" Body="&lt;p&gt;I have elementary OS Juno installed on my laptop and it automatically rotates the screen to upside-down. then i have to go to display to fix this problem. but it doesn't stays normal. Sometimes later it goes to upside-down again which is frustrating. On gnome3 there is a rotation lock button but I cannot find rotation lock button on Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't need the screen rotation, how can I disable it completely?  &lt;/p&gt;&#xA;" OwnerUserId="12752" LastActivityDate="2020-03-09T12:38:47.053" Title="How to disable screen rotation on Juno" Tags="|release-juno|" AnswerCount="8" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16546" PostTypeId="2" ParentId="16544" CreationDate="2018-10-19T14:14:13.107" Score="0" Body="&lt;p&gt;Elementary doesn't have a screen orientation setting AFAIK, but you can try the following in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.orientation active false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I kinda like screen rotation :)&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-19T14:14:13.107" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16548" PostTypeId="1" AcceptedAnswerId="16553" CreationDate="2018-10-19T15:11:44.677" Score="2" ViewCount="12696" Body="&lt;p&gt;I have a dell xps with a touchpad with physical buttons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing Juno my right button does not work for right click.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I undestand from this article &lt;a href=&quot;https://itsfoss.com/fix-right-click-touchpad-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/fix-right-click-touchpad-ubuntu/&lt;/a&gt; this is a new behaviour from underlying drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this article there is a solution on how to reactivate the right click on gnome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a similar solution to reactivate this button with elementary ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;Seb&lt;/p&gt;&#xA;" OwnerUserId="15941" LastActivityDate="2021-09-17T09:33:23.257" Title="Touchpad right button not working for right click on juno" Tags="|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16549" PostTypeId="1" CreationDate="2018-10-19T15:39:16.313" Score="0" ViewCount="1283" Body="&lt;p&gt;I'm an elementary OS newbie here, and while I am able to use my wacom tablets with no issue out of the box in Juno, with pressure sensitivity and all (I have both an intuos pro medium and an small intuos draw), I can't find the wacom settings on the hardware label (or in mouse &amp;amp; touchpad, to that matter) to configure the expresskey buttons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've re-installed libwacom to no avail, and I'm not sure if I'm looking in the wrong place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I duckduckgo'ed around but nobody seems to have this particular problem, so I'm sure I'm doing something wrong, I just don't know what&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for any help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Qiqsh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qiqsh.png&quot; alt=&quot;Wacom Settings Missing&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15943" LastActivityDate="2018-11-07T19:03:12.303" Title="Wacom settings nowhere to be found on Hardware Settings" Tags="|settings|release-juno|wacom|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16551" PostTypeId="1" AcceptedAnswerId="16600" CreationDate="2018-10-19T16:32:44.940" Score="0" ViewCount="683" Body="&lt;p&gt;I've just installed Juno and wireless networking is not working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clicking the networking item in the top right, it just gives a switch for Wired and  the Network settings... items. There is no entry for wireless at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the network setting page the left hand column lists Eathernet, ad virtual devices. Again no entry for Wireless at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doing lshw -C network I get a section for wireless device&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network&#xA;   description: Network controller&#xA;   product: BCM4322 802.11a/b/g/n Wireless LAN Controller&#xA;   vendor: Broadcom Limited&#xA;   physical id: 0&#xA;   bus info: pci@0000:03:00.0&#xA;   version: 01&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress bus_master cap_list&#xA;   configuration: driver=b43-pci-bridge latency=0&#xA;   resources: irq:20 memory:d3200000-d3203fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but doing rfkill list there is nothing for wireless&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: hci0: Bluetooth&#xA;        Soft blocked: no&#xA;        Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;not sure what to do from here. I'm currently away from home so can't use a wired network connection. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wireless networking works fine if I run from the USB drive, and I ticked the install 3rd party drivers during installation. I'm running on a 2009 macbook pro.&lt;/p&gt;&#xA;" OwnerUserId="5862" LastActivityDate="2018-11-20T09:03:15.680" Title="Juno no wireless after upgrading from loki" Tags="|wifi|networking|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16552" PostTypeId="1" CreationDate="2018-10-19T16:33:10.710" Score="1" ViewCount="762" Body="&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/6huq0m/can_i_hide_the_terminals_tab_bar_when_only_a/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; doesn't work for me (&lt;code&gt;org.pantheon...&lt;/code&gt; not found) on Juno. Is there any workaround?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it moved somewhere? I'm using tmux so I don't mind even permanently hide that tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="8017" LastActivityDate="2019-04-22T00:02:10.627" Title="Hide tabs bar in terminal" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16553" PostTypeId="2" ParentId="16548" CreationDate="2018-10-19T16:57:56.053" Score="12" Body="&lt;p&gt;I had the same Problem with my XPS 13. The Solution was very easy.&lt;/p&gt;&#xA;&lt;p&gt;System Settings &amp;gt; Mouse &amp;amp; Touchpad &amp;gt; Physical clicking (in the Touchpad area)&lt;/p&gt;&#xA;&lt;p&gt;Set it from &lt;em&gt;Multitouch&lt;/em&gt; to &lt;em&gt;Touchpad areas&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;This was changed in &lt;code&gt;Odin&lt;/code&gt; (0.6) to:&lt;/p&gt;&#xA;&lt;p&gt;System Settings &amp;gt; Mouse &amp;amp; Touchpad &amp;gt; Touchpad &amp;gt; Physical secondary clicking&lt;/p&gt;&#xA;&lt;p&gt;Set it from &lt;em&gt;Multitouch&lt;/em&gt; to &lt;em&gt;Areas&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15903" LastEditorUserId="22522" LastEditDate="2021-09-17T09:33:23.257" LastActivityDate="2021-09-17T09:33:23.257" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16554" PostTypeId="1" CreationDate="2018-10-19T17:33:28.760" Score="0" ViewCount="145" Body="&lt;p&gt;For the top panel or Plank - a places list that shows devices as well as folders.&lt;/p&gt;&#xA;" OwnerUserId="7330" LastActivityDate="2024-03-23T07:01:15.147" Title="Can I install a places status indicator like Ubuntu's?" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16556" PostTypeId="1" CreationDate="2018-10-19T18:19:14.107" Score="1" ViewCount="208" Body="&lt;p&gt;Until now I've used Elementary 0.4.1 Loki. Now I've installed the Juno version. Before that I've made a backup of 0.4.1 with Timeshift,and restored it in 5.0 but none of the software appears. Is it possible to restore a 0.4.1(Loki) backup in version 5 (Juno)?&lt;/p&gt;&#xA;" OwnerUserId="15950" LastActivityDate="2019-01-24T08:29:04.130" Title="Restore backup after upgrade to Juno" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16557" PostTypeId="1" CreationDate="2018-10-19T18:20:20.010" Score="0" ViewCount="244" Body="&lt;p&gt;Hardware: White MacBook mid-2010, Intel Processor Duo Core, 8 GB RAM, SSD&#xA;Loki was successfully installed on this MacBook prior. When I installed Juno via the directions using Etcher and reboot there is screen flicker and what appears to be almost a boot loop or video problems. The dock is visible for a split second and then the screen is dark except for the notification menu (Bluetooth, start button, volume.)  I assume this is a video driver issue?! Open to suggestions...Loki is successfully re-installed. The funny thing is I am having problems with most recent Linux distros: Ubuntu 18 does not finish install, etc.  Open to any suggestions to make this work.&lt;/p&gt;&#xA;" OwnerUserId="15951" LastActivityDate="2019-04-21T08:01:20.237" Title="Juno boots to black screen with top menu visible" Tags="|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16558" PostTypeId="1" AcceptedAnswerId="18013" CreationDate="2018-10-19T21:29:59.440" Score="0" ViewCount="820" Body="&lt;p&gt;Today I have installed Juno.&#xA;Because it is important for me to have tray icons for programs, I used the answer in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16502/missing-icons-in-the-wingpanel/16503#16503&quot;&gt;this thread&lt;/a&gt; to get that functionality back.&#xA;However, after logging out &amp;amp; in, the bluetooth image disappeared, even though there is a placeholder and the functionality is still there as can been from the screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/98QJu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/98QJu.png&quot; alt=&quot;bluetooth icon gone 1&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ZvKXN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZvKXN.png&quot; alt=&quot;bluetooth icon gone 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how I can get the picture of bluetooth back?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="13020" LastActivityDate="2019-01-23T09:46:08.410" Title="Bluetooth Tray Icon Missing" Tags="|wingpanel|bluetooth|" AnswerCount="1" CommentCount="3" ClosedDate="2019-01-25T05:44:01.810" ContentLicense="CC BY-SA 4.0" />
  <row Id="16560" PostTypeId="1" CreationDate="2018-10-19T22:55:35.517" Score="4" ViewCount="205" Body="&lt;p&gt;Recently installed Juno based off recommendation from a friend. The issue I'm currently facing is my laptop (Dell XPS 13), even though I've configured to never suspend on both Plugged and Unplugged, it suspends after a period of time. Are there any logs I can provide that would help? I'd prefer to avoid having systemd do anything if there's a way to configure it via the options. It just &lt;em&gt;feels&lt;/em&gt; like something isn't hooked up quite right. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="15939" LastActivityDate="2019-07-30T06:02:05.610" Title="Power Configuration Seems to Not Be Respected by OS" Tags="|suspend|release-juno|power|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16562" PostTypeId="1" CreationDate="2018-10-20T01:02:33.027" Score="1" ViewCount="627" Body="&lt;p&gt;I just updated to Juno today and everything is running great apart from 2 separate issues.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;When I watch videos on Google chrome eg. Youtube or Twitch &lt;em&gt;the video often pauses while the sound continues before starting again when I change from full-screen.&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have found that with any theme that is not the default &lt;code&gt;wingpanel&lt;/code&gt; will not turn black when windows are maximized. I tried the instructions at the below link but the problem wasn't resolved. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Neither of these issues were present for me in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for any help you guys are awesome!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/52pmxp/fixing_transparent_wingpanel_with_custom_themes/?ref=share&amp;amp;ref_source=link&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/52pmxp/fixing_transparent_wingpanel_with_custom_themes/?ref=share&amp;amp;ref_source=link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15956" LastEditorUserId="19360" LastEditDate="2019-12-15T03:10:30.480" LastActivityDate="2023-12-24T11:07:30.927" Title="Issues with Chrome video playback and Wingpanel after updating to Juno" Tags="|release-juno|wingpanel|google-chrome|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16563" PostTypeId="1" CreationDate="2018-10-20T03:05:27.820" Score="2" ViewCount="2769" Body="&lt;p&gt;If you're in your home folder, you can right-click any of the folders and just under &quot;Properties&quot; are some colors. If you click one of the colors, it will highlight the text underneath that folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was wondering if there is a way to change the color of the folder itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know there is a package called folder-color, which works on Ubuntu-based systems but doesn't seem to work on elementaryOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;I just came across this blog post. The very first picture, under &lt;strong&gt;0. The Desktop!&lt;/strong&gt;, has different color folders. Anyone know how he did that?&#xA;&lt;a href=&quot;https://medium.com/@alex285/7-things-elementary-os-does-terribly-wrong-in-2018-b9035df08791&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@alex285/7-things-elementary-os-does-terribly-wrong-in-2018-b9035df08791&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE #2: I heard back from the guy who wrote that blog post. He said it was from a &quot;WIP/Branch when elementary was trying 'colored' folders. But it didnt land on final Juno release!&quot;  From the context, I think WIP means &quot;work in progress&quot; and is referring to a beta version.  It would be nice if the developers made changing folder colors a permanent option. They did say this regarding the new manila folders: &quot;We switched from the previous blue folders throughout the OS for folders to be more neutral, &lt;strong&gt;plus to open up the possibilities for more meaningful use of color in the future&lt;/strong&gt;.&quot;(emphasis added) in the following article: &lt;a href=&quot;https://medium.com/elementaryos/elementary-os-5-juno-is-here-471dfdedc7b3&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/elementary-os-5-juno-is-here-471dfdedc7b3&lt;/a&gt; I would definitely like to be able to change colors of the folders. &lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-10-26T15:31:34.120" LastActivityDate="2019-02-01T12:28:33.623" Title="Is it possible to change the color of folders?" Tags="|pantheon-files|release-juno|folder|home|color|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16564" PostTypeId="1" CreationDate="2018-10-20T03:26:35.930" Score="1" ViewCount="2207" Body="&lt;p&gt;I’ve recently done &lt;a href=&quot;https://www.lifeofgeek.com/install-lamp-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;. I just used php7.1 instead of 7.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So for &lt;code&gt;mysql&lt;/code&gt;, I type &lt;code&gt;root&lt;/code&gt; for the password as I cannot leave root password blank. Then I go to &lt;code&gt;localhost/phpmyadmin&lt;/code&gt;, but I can’t login via username: root and password: root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I’ve been looking at some guides here and there, but no cigar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Though one thing I noticed is there currently is non for 5.0 Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can somebody help me out?&lt;/p&gt;&#xA;" OwnerUserId="15899" LastEditorUserId="14940" LastEditDate="2019-01-01T22:05:31.360" LastActivityDate="2019-12-13T13:13:30.553" Title="What is the proper way to install LAMP in elementary OS 5.0 Juno?" Tags="|release-juno|software-installation|thirdpartyapps|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16565" PostTypeId="2" ParentId="16562" CreationDate="2018-10-20T06:07:27.353" Score="0" Body="&lt;p&gt;Disable H/W Acceleration in chrome settings for a workaround to video freezing in chrome.&lt;/p&gt;&#xA;" OwnerUserId="15398" LastActivityDate="2018-10-20T06:07:27.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16567" PostTypeId="1" AcceptedAnswerId="16604" CreationDate="2018-10-20T08:15:55.980" Score="0" ViewCount="3344" Body="&lt;p&gt;Yesterday, I installed Elementary OS Juno. This is a fresh install. When I tried to install g++ it gave me following stream of Errors. Basically some dependencies are unmet. When I tried to install them the error says:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;E: Unable to correct problems, you have held broken packages.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the full output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cstayyab@ciit:~$ sudo apt install g++&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; g++ : Depends: gcc (&amp;gt;= 4:7.3.0-3ubuntu2) but it is not going to be installed&#xA;       Depends: g++-7 (&amp;gt;= 7.3.0-12~) but it is not going to be installed&#xA;       Depends: gcc-7 (&amp;gt;= 7.3.0-12~) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;cstayyab@ciit:~$ sudo apt install g++-7&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; g++-7 : Depends: gcc-7 (= 7.3.0-16ubuntu3) but it is not going to be installed&#xA;         Depends: libstdc++-7-dev (= 7.3.0-16ubuntu3) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried to list broken packages but I couln not find any broken package on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also ran:&#xA;&lt;code&gt;sudo apt install -f&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But that was fine. No packages were installed or fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output for &#xA;&lt;code&gt;sudo apt install gcc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cstayyab@ciit:~$ sudo apt-get install gcc&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; gcc : Depends: gcc-7 (&amp;gt;= 7.3.0-12~) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15958" LastEditorUserId="15958" LastEditDate="2018-10-20T08:37:31.337" LastActivityDate="2018-11-28T15:25:31.847" Title="Cannot install gcc and g++ on Elementary OS Juno" Tags="|apt|package-management|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16568" PostTypeId="1" AcceptedAnswerId="16570" CreationDate="2018-10-20T08:24:59.193" Score="0" ViewCount="284" Body="&lt;p&gt;I'm trying to remove PPA, that has been taken down from Launchpad and none of the methods I found worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically I'm trying to remove &lt;code&gt;libreoffice/libreoffice-5-2&lt;/code&gt;, which was not just EOL, but completelly removed from Launchpad. Because it's no longer online, AppCentre throws warnings after opening and, more importantly, fails to check for updates after turning on my laptop. I have to check updates via terminal, AppCentre just doesn't want to do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried several methods:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-add-repository --remove ppa:libreoffice/libreoffice-5-2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo ppa-purge ppa:libreoffice/libreoffice-5-2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo rm -i /etc/apt/sources.list.d/libreoffice-ubuntu-libreoffice-5-2-xenial.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;None of them works, the first two complain about missing Release file, the last one doesn't seem to have effect - running &lt;code&gt;sudo apt update&lt;/code&gt; still checks the PPA I deleted (&lt;code&gt;libreoffice/libreoffice-5-2&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One extra problem is that elementaryOS doesn't have any GUI for managing sources (understandably), which would be the method I'd try on e.g. Ubuntu. And I don't want to polute my system with too many non-elementary packages anyway, especially those intended to mess with other software (I had gnome-software and gdebi before but I removed both).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One more thing: I also have now LibreOffice Fresh enabled on my system, so I would wish for a method that doesn't screw with that one.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2018-10-20T10:59:13.727" Title="Remove PPA that was taken down from Launchpad" Tags="|release-loki|ppa|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16569" PostTypeId="1" AcceptedAnswerId="16572" CreationDate="2018-10-20T09:38:28.457" Score="0" ViewCount="304" Body="&lt;p&gt;Does anyone know why keyboard shortcuts that include shift like control + shift + j in android studio to select all occurrences of something does not work, but shortcuts  like double tap shift works perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did some debugging and found out that when using these shortcuts the shift key is not getting registered but using shift alone works. &lt;/p&gt;&#xA;" OwnerUserId="15961" LastActivityDate="2018-10-20T11:50:01.717" Title="Keyboard shortcuts which includes shift key does not work but shift alone works" Tags="|keyboard-shortcuts|elementary-project|android-studio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16570" PostTypeId="2" ParentId="16568" CreationDate="2018-10-20T10:59:13.727" Score="0" Body="&lt;p&gt;Try using the Software Sources utility, just unchecking the repo in the &quot;Other Software&quot; tab of the app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16463/software-sources-in-juno&quot;&gt;Software Sources in Juno&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10465" LastActivityDate="2018-10-20T10:59:13.727" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16571" PostTypeId="1" CreationDate="2018-10-20T11:14:36.287" Score="1" ViewCount="669" Body="&lt;p&gt;Two days ago I installed elementary OS and now I am experiencing issues with my external monitor. I'm using a Dell XPS 15 9560 with and LG superwide monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Unable to disable built-in monitor&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the office I like to work on a external monitor with the laptop open and the built-in display disabled. With this setup I can use the track pad of the laptop for scrolling. That's how I did it with the previous distro (Pop!_OS) I've been using. But disabling the built-in monitor seems to be impossible with eOS, or am I wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;No tray nor dock after sleep&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While using an external monitor, my laptop is closed. This works fine s long as the system does not go to sleep. Waking it up is a pain because it does not listen to the wireless mouse or keyboard (also Dell). Touching the built-in keyboard wakes up the system but then I have two screens, both missing the to menu bar/tray as well as the dock. The only thing I can do in this scenario is a hard reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Not dock nor tray after reboot&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This morning I logged in and again, no tray or dock were showing, so I did a reboot without the external monitor. But even after a reboot, they didn't show up. I had to manually launch the switchbaord (&lt;code&gt;/usr/bin/io.elementray.switchboard&lt;/code&gt;) though the terminal to be able to access display settings, where I fiddled a bit with the settings. After rebooting the tray and dock were back (fortunately).&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2019-04-24T15:02:00.583" Title="Issues with exernal monitor on elementary OS Juno" Tags="|display|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16572" PostTypeId="2" ParentId="16569" CreationDate="2018-10-20T11:50:01.717" Score="0" Body="&lt;p&gt;I had a similar problem but using shortcuts like &lt;code&gt;&amp;lt;shift&amp;gt;+&amp;lt;alt&amp;gt;+&amp;gt;&lt;/code&gt;. I had the same symptom where only one of the modifier keys was being registered at a time, depending on which one was pressed first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The root cause for me was that &lt;code&gt;&amp;lt;shift&amp;gt;+&amp;lt;alt&amp;gt;&lt;/code&gt; was already in use by the operating system for cycling between keyboard layouts, thus not sending the keypress to the application(terminal in my case). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try checking &lt;code&gt;System Settings &amp;gt; keyboard&lt;/code&gt; and make sure none of the shortcuts you are trying to use are already in use. Also make sure that &lt;code&gt;switch layout&lt;/code&gt; isn't set to &lt;code&gt;ctrl + shift&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15933" LastActivityDate="2018-10-20T11:50:01.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16573" PostTypeId="1" CreationDate="2018-10-20T12:11:44.777" Score="1" ViewCount="451" Body="&lt;p&gt;I am under the impression that the &lt;strong&gt;Middle click paste&lt;/strong&gt; toggle under Mouse settings does not have any effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nYgB4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nYgB4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Middle click paste works with or without this setting enabled, which is kind of annoying. I'm using a Dell KM717 mouse (and keyboard). Am I missing something? How can I debug this feature and make it work?&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2018-10-20T12:11:44.777" Title="Impossible to disable middle click paste" Tags="|mouse|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16575" PostTypeId="1" CreationDate="2018-10-20T13:11:30.107" Score="1" ViewCount="57" Body="&lt;p&gt;So ever since I've upgraded my Plex server to Juno yesterday, I can't prevent my machine from sleeping anymore. I've already set the the appropriate value in System Settings to never suspend, but it just keeps falling asleep after 15 minutes if I'm not logged in or after 30 minutes if I'm logged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is really frustrating, as it was working as expected in Loki. Do I need to make further changes or is this a bug?&lt;/p&gt;&#xA;" OwnerUserId="10002" LastActivityDate="2018-10-20T13:11:30.107" Title="Can't prevent my computer from falling asleep" Tags="|release-juno|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16576" PostTypeId="2" ParentId="16487" CreationDate="2018-10-20T14:04:42.803" Score="5" Body="&lt;p&gt;Got exactly the same issue on Juno stable, and found the solution here: &lt;a href=&quot;https://superuser.com/a/1315412&quot;&gt;https://superuser.com/a/1315412&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem basically comes down to the fact that the power settings are not propagated to the 'lightdm' user, which is the active one on the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I fixed my issue as follows, copied from the answer in the above link:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -s&#xA;su -s /bin/bash lightdm&#xA;&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This prints 'suspend' and '1200', respectively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To turn off suspension, set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;UPDATE: If you're getting the &lt;strong&gt;No protocol specified&lt;/strong&gt; issue, as @ankscorek and I ran into after upgrading to Juno 5.1.3, use the following command to add the lightdm user to the access control list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo xhost +SI:localuser:lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;before changing to the lightdm user, so before all the above commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If above solution does not work (as is for me the case now as well this second time around), you can always ditch the pantheon greeter (as I did):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install lightdm-gtk-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15966" LastEditorUserId="15966" LastEditDate="2020-04-09T09:30:40.120" LastActivityDate="2020-04-09T09:30:40.120" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16582" PostTypeId="1" CreationDate="2018-10-20T16:32:59.113" Score="0" ViewCount="484" Body="&lt;p&gt;Timezone Europe/Berlin, time format 24h, system language German.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/knbmk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/knbmk.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user15971" LastActivityDate="2018-11-24T06:40:26.900" Title="Juno: how to remove am/pm indication from login screen?" Tags="|greeter|language|time|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16583" PostTypeId="1" CreationDate="2018-10-20T16:44:13.627" Score="2" ViewCount="470" Body="&lt;p&gt;I installed Juno yesterday. Tested nightlight, it was working, but today it is not. I can see the indicator in the wingpanel, can turn it on/off, use the slider, but nothing happens.&lt;/p&gt;&#xA;" OwnerUserId="2427" LastEditorUserId="2427" LastEditDate="2018-10-20T19:32:38.843" LastActivityDate="2019-03-01T18:32:09.360" Title="Juno: NightLight stopped working" Tags="|wingpanel|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16585" PostTypeId="1" CreationDate="2018-10-20T18:23:53.477" Score="0" ViewCount="297" Body="&lt;p&gt;Watching youtube videos I noticed that whenever my cursor is on top of the video itself it the video will stop (visual only) when the cursor pauses. This was after updating to Juno&lt;/p&gt;&#xA;" OwnerUserId="15975" LastActivityDate="2018-12-10T11:01:55.483" Title="Juno: Youtube videos pause when mouse stops moving (Chromium)" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16586" PostTypeId="1" CreationDate="2018-10-20T19:41:38.053" Score="0" ViewCount="560" Body="&lt;p&gt;I'm experiencing weird behaviour with my wireless Dell keyboard. After pairing it seems to be stuck in a connection loop. It's added again and again until I turn it off. What's more, other bluetooth devices are blocked as well. Here is a GIF to illustrate the issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/v0MkY.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v0MkY.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Luckily, the keyboard and mouse come with a USB dongle, which works fine. Only on direct bluetooth connections (channel #2 and #3) there is this problem. The mouse, on the other hand, works perfectly fine on the dongle channel as well as on the two bluetooth channels. And so does my Microsoft Surface keyboard, no problems there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the Dell keyboard on a daily basis with Pop!_OS on this same laptop. It also works fine with my Mac and all my other devices. It's just behaving badly on elementaryOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A solution would be to buy another surface keyboard, but clearly it's a software issue so maybe there is an easy fix?&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2019-09-30T17:13:25.933" Title="Trouble connecting wireless keyboard (connection loop)" Tags="|keyboard|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16587" PostTypeId="2" ParentId="16563" CreationDate="2018-10-20T20:13:17.223" Score="1" Body="&lt;p&gt;If you have elementary tweaks installed, it's pretty straightforward to swap out icon packs, but that's kind of a global change to all icons and I don't think this is quite what you're looking for. Unfortunately I'm not aware of this functionality built into elementary OS, but maybe someone more knowledgeable about this stuff will come along.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-10-20T20:13:17.223" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16589" PostTypeId="2" ParentId="16554" CreationDate="2018-10-20T20:27:01.010" Score="0" Body="&lt;p&gt;I'm not sure about the panel, but as far as Plank is concerned, no, I don't think so. Someone else suggested swapping Plank for Docky &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1950/is-is-possible-to-show-removable-drives-on-plank&quot;&gt;here&lt;/a&gt;, but I don't think that's a great solution either since I don't believe Docky is being maintained or actively developed for anymore (their last release was back in 2015, not necessarily a bad thing but a reddish flag).&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-10-20T20:27:01.010" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16591" PostTypeId="1" CreationDate="2018-10-20T20:36:01.833" Score="0" ViewCount="185" Body="&lt;p&gt;Please help, I'm trying elementary for the first time and wired internet does work.&#xA;Under network settings it just keeps trying to connect, then says not connected.&#xA;My motherboard's lan chip is a Intel® Ethernet Connection I217-V &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess Juno doesn't come packaged with the required drivers? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="15978" LastActivityDate="2019-03-18T10:14:26.313" Title="elementary OS 5 Juno - No internet via Ethernet - Desktop - Intel I217-V" Tags="|intel|internet|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16592" PostTypeId="1" CreationDate="2018-10-20T22:39:24.870" Score="3" ViewCount="570" Body="&lt;p&gt;I have installed elementary OS 5.0 Juno on my laptop and after a while working , when I actually leave it in sleep mode , it doesn't starts normally. The only way I could turn on was to shut down ( using the power button ) and then turn it on.&lt;/p&gt;&#xA;" OwnerUserId="15981" LastEditorUserId="16827" LastEditDate="2019-04-16T04:09:55.473" LastActivityDate="2019-04-16T04:09:55.473" Title="elementary OS 5.0 Juno doesn't start after sleep" Tags="|greeter|release-juno|suspend|laptop|shutdown|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16595" PostTypeId="1" CreationDate="2018-10-21T01:52:25.777" Score="1" ViewCount="276" Body="&lt;p&gt;I'm relatively new to elementary so sorry if it's been asked before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running a setup with 2 monitors attached to a GTX 1070, when I go full screen in any browser (Using chrome but did test with Epiphany) on anything but my primary monitor will cause the window to glitch out and render slowly...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried disabling hardware acceleration and tried multiple drivers and still having the issue...&lt;/p&gt;&#xA;" OwnerUserId="15984" LastActivityDate="2021-01-16T04:19:08.160" Title="Going fullscreen with a browser locks up that window only on secondary display" Tags="|release-juno|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16596" PostTypeId="1" CreationDate="2018-10-21T03:03:12.887" Score="1" ViewCount="1282" Body="&lt;p&gt;I've got a Thinkpad X1 Carbon 4th gen with a 1080p 14&quot; display. My default (max) resolution is 1920x1080. It looks good in Elementary 5.0, although fonts are a bit too small. So i installed Elementary Tweaks and increased font size. Then i changed font size for Firefox... and everything looked perfect. Then i installed Cisco PacketTracer, Anaconda, Spyder and RStudio. They look huge! Then i found out that if i decrease my screen resolution to 1600x900, these apps look really nice, but the app menu (slingshot?) occupies more than half my display height.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried using 1920x1080 with &lt;code&gt;xrandr --output eDP-1 --scale 0.9x0.9&lt;/code&gt; and it's really good, except the fonts are all blurred, and it feels like i need glasses. I've also tried 1600x900 with xrandr --output eDP-1 --scale 1.2x1.2, which theoretically also looks good, but the mouse is restricted to an invisible border and i can't reach the right-end as well as the bottom of the display with the cursor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So... I wouldn't mind using 1600x900 if i could only reduce icon size in the app menu. But i need to figure this out.&#xA;I've tried to make the fonts look crispy, tried to figure out how i could solve the mouse border problem... tried everything. It's crazy how many forums i've searched, even other linux distros. Can't seem to find anything that can help me out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas, anyone? Is it possible to enable scaling to specific apps? It has been a nightmare. I need to use these apps for school and can't use them correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/G3rZI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/G3rZI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/dEw8O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dEw8O.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With &lt;code&gt;xrandr --output eDP-1 --scale 1.2x1.2&lt;/code&gt; it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1MMP4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1MMP4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-11-13T09:46:11.097" LastActivityDate="2018-11-13T09:46:11.097" Title="Resolution nightmare" Tags="|display|slingshot|resolution|hidpi|mixed-dpi|" AnswerCount="1" CommentCount="0" ClosedDate="2018-11-30T19:57:08.550" ContentLicense="CC BY-SA 4.0" />
  <row Id="16600" PostTypeId="2" ParentId="16551" CreationDate="2018-10-21T08:43:17.953" Score="1" Body="&lt;p&gt;Turned out to be a relatively easy fix. I just needed to install the &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; driver from the app center once I managed to get a wired Ethernet connection.&lt;/p&gt;&#xA;" OwnerUserId="5862" LastActivityDate="2018-10-21T08:43:17.953" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16601" PostTypeId="2" ParentId="16449" CreationDate="2018-10-21T09:08:25.773" Score="4" Body="&lt;p&gt;I don't know if this is an firefox bug or not but there are more topics about this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16332/firefox-right-button-on-selected-text-start-inspect-tool-not-right-button-menu/16341#16341&quot;&gt;Firefox right button on selected text start Inspect Tool not right button menu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16475/firefox-right-click-issue&quot;&gt;Firefox right click issue&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also what version of firefox are you using? I have version 62.03 and got no problems with the mouse button/context menu for now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: got a litte fix go to -&gt; about:config and change ui.context_menus.after_mouseup to true This fix the problem for now&lt;/p&gt;&#xA;" OwnerUserId="15989" LastEditorUserId="15989" LastEditDate="2018-10-21T09:44:12.183" LastActivityDate="2018-10-21T09:44:12.183" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16603" PostTypeId="1" CreationDate="2018-10-21T12:44:58.670" Score="0" ViewCount="1373" Body="&lt;p&gt;I am not able to use Right Click Option to Run Terminal at a precise location in the Latest Elementory OS Juno.I humbly request your assistance. &lt;/p&gt;&#xA;" OwnerUserId="15992" LastActivityDate="2018-10-24T15:21:46.530" Title="How to Enable Right-Click and desktop icons in Elementory OS Juno" Tags="|pantheon-files|release-juno|dconf|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16604" PostTypeId="2" ParentId="16567" CreationDate="2018-10-21T13:09:16.597" Score="0" Body="&lt;p&gt;After posting question here and trying lots of workarounds, I reinstalled Elementary OS but problem was there but then I found out that the mirror I was using in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; was not updated so I changed all URLs to &lt;code&gt;us.archive.ubuntu.com&lt;/code&gt; and the default due to timezone was &lt;code&gt;pk.archive.ubuntu.com&lt;/code&gt; which was outdated mirror. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After changing the mirrors my problem was solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am posting this answer so if someone else have this problem they might try to change mirrors.&lt;/p&gt;&#xA;" OwnerUserId="15958" LastActivityDate="2018-10-21T13:09:16.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16606" PostTypeId="2" ParentId="16549" CreationDate="2018-10-21T17:08:22.343" Score="3" Body="&lt;p&gt;the switchboard-plug-gcc-wacom 0.2.0-0~77~ubuntu0.4.1 which was installed in Loki is missing in Juno. You can change your Wacom settings with xsetwacom in Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Terminal and type xsetwacom --list devices&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you see your tablet there, you can change it settings. For example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xsetwacom set &quot;Wacom name of your tablet&quot; Mode Relative&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command changes to Mouse Mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that you can add your command to the Startup Applications in Juno.&#xA;System Settings&gt;Applications&gt;Startup&lt;/p&gt;&#xA;" OwnerUserId="15996" LastActivityDate="2018-10-21T17:08:22.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16608" PostTypeId="2" ParentId="16449" CreationDate="2018-10-21T18:29:37.800" Score="0" Body="&lt;p&gt;I have the same exact problem on my laptop. The roundabout way is to HOLD the right-click on a MOUSE. Then the menu stays open and you can select the proper option.&#xA;Quite frustrating, TBH. FF 62.0.3&lt;/p&gt;&#xA;" OwnerUserId="10465" LastActivityDate="2018-10-21T18:29:37.800" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16610" PostTypeId="1" CreationDate="2018-10-21T19:38:19.660" Score="2" ViewCount="668" Body="&lt;p&gt;After installing Juno it seems not possible to middle click paste between certain programs anymore. Within the same program it works just normal. Also the option in the Settings app does not effect this behavior at all.&lt;/p&gt;&#xA;" OwnerUserId="15997" LastActivityDate="2023-12-29T08:02:40.300" Title="Juno - Middle click paste between different programs" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16611" PostTypeId="2" ParentId="16510" CreationDate="2018-10-21T22:30:31.227" Score="1" Body="&lt;p&gt;I've noticed that who encountered this problem is italian (including me) and thinking about it I've figured out how to solve the problem!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Editing the file (with sudo): &lt;pre&gt;&lt;code&gt;/usr/share/applications/gala-multitaskingview.desktop&lt;/code&gt;&lt;/pre&gt;&#xA;and replacing the row &lt;pre&gt;&lt;code&gt;Icon[it]=vista-multitasking&lt;/code&gt;&lt;/pre&gt; with &lt;pre&gt;&lt;code&gt;Icon[it]=multitasking-view&lt;/code&gt;&lt;/pre&gt;&#xA;solved the problem!&lt;br/&gt;&lt;br/&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Ho notato che tutti noi che abbiamo riscontrato questo problema siamo italiani, e da lì mi è venuta l'illuminazione:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Andando infatti a modificare il file (con sudo): &lt;pre&gt;&lt;code&gt;/usr/share/applications/gala-multitaskingview.desktop&lt;/code&gt;&lt;/pre&gt;&#xA;e sostituendo la riga &lt;pre&gt;&lt;code&gt;Icon[it]=vista-multitasking&lt;/code&gt;&lt;/pre&gt; con &lt;pre&gt;&lt;code&gt;Icon[it]=multitasking-view&lt;/code&gt;&lt;/pre&gt;&#xA;si risolve il problema!&lt;br/&gt;&lt;br/&gt;&#xA;Probabilmente il file relativo all'icona italiana è mancante o chissà cos'altro.&lt;/p&gt;&#xA;" OwnerUserId="15999" LastActivityDate="2018-10-21T22:30:31.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16613" PostTypeId="2" ParentId="16519" CreationDate="2018-10-21T23:35:01.817" Score="3" Body="&lt;p&gt;I had the same issue. I had set &quot;Suspend when inactive&quot; to &quot;Never&quot;, but it would still suspend when idle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because I don't care to EVER put this system into suspend mode (automatically or otherwise), I also did another couple of things:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I set the power button action to &quot;do nothing&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I did this command from the &lt;a href=&quot;https://wiki.debian.org/Suspend&quot; rel=&quot;nofollow noreferrer&quot;&gt;Debian wiki&lt;/a&gt;, to completely disable any suspend actions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it doesn't suspend itself. I suspect that the systemctl command was the specific thing that did the trick, but I haven't done any further tests to see whether the power button setting also helped.&lt;/p&gt;&#xA;" OwnerUserId="15927" LastActivityDate="2018-10-21T23:35:01.817" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="16614" PostTypeId="2" ParentId="16603" CreationDate="2018-10-21T23:42:37.547" Score="2" Body="&lt;p&gt;You should be able to do the right-click menu, mouse to &quot;Open in&quot;, and select Terminal.&lt;/p&gt;&#xA;" OwnerUserId="15927" LastActivityDate="2018-10-21T23:42:37.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16616" PostTypeId="2" ParentId="16567" CreationDate="2018-10-22T00:37:34.750" Score="0" Body="&lt;p&gt;Thanks.  All I did was apt install build-essential which installed the required compilers for me. &lt;/p&gt;&#xA;" OwnerUserId="16001" LastActivityDate="2018-10-22T00:37:34.750" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16617" PostTypeId="2" ParentId="16564" CreationDate="2018-10-22T00:42:44.387" Score="0" Body="&lt;p&gt;As Juno has an Ubuntu 18.04 base, the following might work. (Mariadb)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mariadb-server mariadb-client&#xA;sudo mysql_secure_install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will set a root password. &#xA;You may have to use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql -u root -p&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;there onwards.&lt;/p&gt;&#xA;" OwnerUserId="16001" LastEditorUserId="13828" LastEditDate="2018-11-30T20:16:56.300" LastActivityDate="2018-11-30T20:16:56.300" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16618" PostTypeId="2" ParentId="16493" CreationDate="2018-10-22T00:47:46.247" Score="0" Body="&lt;p&gt;Have you attempted &lt;a href=&quot;http://localhost:641/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:641/&lt;/a&gt; ? I could connect my EpsonL6190 after getting the ppd.gz from the Epson support site without a problem.  &lt;/p&gt;&#xA;" OwnerUserId="16001" LastActivityDate="2018-10-22T00:47:46.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16619" PostTypeId="2" ParentId="16345" CreationDate="2018-10-22T01:08:53.150" Score="0" Body="&lt;p&gt;That's actually a brilliant question!  Always check the checksum of the ISO after download. Please see &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16001" LastActivityDate="2018-10-22T01:08:53.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16620" PostTypeId="1" AcceptedAnswerId="16634" CreationDate="2018-10-22T01:16:14.833" Score="0" ViewCount="321" Body="&lt;p&gt;I want to minimize a window through the active corners I only see that it can be done by means of a customized command, does anyone know what it would be? I would appreciate your help.&lt;/p&gt;&#xA;" OwnerUserId="16002" LastActivityDate="2019-07-02T00:37:34.997" Title="How to minimize from active corners" Tags="|desktop|command-line|hot-corners|minimize|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16621" PostTypeId="1" CreationDate="2018-10-22T03:08:19.213" Score="9" ViewCount="753" Body="&lt;p&gt;in juno have to mouse click in password input box (fresh OS setup), in Loki the box get focus automatically after OS start. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;is there any option I can use? thanks.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-10-22T03:08:19.213" Title="how to make password input box get focus in login screen (juno)" Tags="|greeter|" AnswerCount="0" CommentCount="1" ClosedDate="2019-01-02T23:06:43.770" ContentLicense="CC BY-SA 4.0" />
  <row Id="16622" PostTypeId="1" AcceptedAnswerId="16900" CreationDate="2018-10-22T03:14:54.767" Score="0" ViewCount="1486" Body="&lt;p&gt;When i use the shortcut keys Win+L, click the Lock option in wingpanel-session menu, or when i suspend, lock doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dm-tool lock&lt;/code&gt; works.&#xA;&lt;code&gt;light-locker-command --lock&lt;/code&gt; shows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Received error message from the locker: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ScreenSaver was not provided by any .service files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If i install gnome-screensaver lock screen works for sleep and shortcut keys, but not from the wingpanel-session menu. It also displays differently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to get this working? I just fresh-installed Elementary (Juno).&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2019-12-06T14:18:13.210" Title="Lock screen not working" Tags="|wingpanel|greeter|keyboard-shortcuts|suspend|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16624" PostTypeId="1" CreationDate="2018-10-22T06:10:06.310" Score="1" ViewCount="147" Body="&lt;p&gt;Since upgrading to Juno I've been having issues performing &quot;drag&quot; actions on the track pad. Examples include trying to drag windows, or dragging to select text on a webpage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Steps&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Click and hold down the track pad.&lt;/li&gt;&#xA;&lt;li&gt;Drag while maintaining the above.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This should result in the window dragging, but often it just moves the mouse and doesn't actually &lt;em&gt;grab&lt;/em&gt; the window / text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use two fingers (e.g. one finger clicks and holds, and a second finger swipes the trackpad) the action works 100% of the time. This is inconvenient though, and wasn't occurring in Loki. It's not a track pad hardware issue as this action works great on MacOS which is on another partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a 2016 MacBook Pro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions on how to resolve this issue would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="14468" LastActivityDate="2019-01-25T05:15:18.543" Title="Single finger trackpad dragging inconsistent" Tags="|touchpad|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16625" PostTypeId="2" ParentId="16491" CreationDate="2018-10-22T07:11:02.693" Score="1" Body="&lt;p&gt;Before you install Juno, you choose your time zone in the installation wizard.  This seems to affect the system date/time/language settings.  So when I booted up, the system showed me a date in Arabic (based on my time zone) and after logging in the date time in the bar at the top would be US/English format.  In System Settings -&gt; Language &amp;amp; Region, I had to &quot;Unlock&quot; additional permissions, then press &quot;Set System Language&quot;.  This should change the login screen to French.  This is the same behavior from Loki and Freya as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EPTRx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EPTRx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16004" LastActivityDate="2018-10-22T07:11:02.693" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16626" PostTypeId="1" CreationDate="2018-10-22T07:21:26.347" Score="0" ViewCount="156" Body="&lt;p&gt;So Im using Juno and I can't get my NordVPN to work correctly. I keep getting DNS Leaks. I'm pretty sure the issue has to do with the OpenVPN protocol. Anyone know how to fix this problem? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16005" LastActivityDate="2019-04-20T05:40:22.993" Title="How to Fix DNS Leak with VPN" Tags="|vpn|openvpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16627" PostTypeId="2" ParentId="16596" CreationDate="2018-10-22T07:25:15.217" Score="0" Body="&lt;p&gt;You can try to use the --panning Option for xrandr.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you set&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --scale 1.2x1.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for the 1600x900 Resolution, you have to add the panning Option&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --panning 1600x900&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will increase the Mouse Area.&lt;/p&gt;&#xA;" OwnerUserId="15903" LastActivityDate="2018-10-22T07:25:15.217" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16630" PostTypeId="1" CreationDate="2018-10-22T10:07:03.807" Score="0" ViewCount="146" Body="&lt;p&gt;I have installed Elementary OS on my iMac 5k (17.1) and it looks stunning. However I'm missing a feature from macOS that I grew quite fond of. When I move the mouse into a corner of my Desktop the screen is turned of (not locked!!). I do this frequently to save energy. But I don't want this to happen immediately but after a minor timeout (500ms) so the screen does not turn dark when I move the mouse the the corner accidentally (for instance when trying to shut the computer down).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this possible with hot-actions?&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2024-03-25T17:04:55.640" Title="Lock screen on corner action (with timeout)" Tags="|display|hot-corners|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16631" PostTypeId="2" ParentId="16626" CreationDate="2018-10-22T10:13:11.667" Score="1" Body="&lt;p&gt;Hi This is a bug in openVPN. If you want to fix DNS leak you need to use Nordvpn linux client. You can connect to nordvpn with terminal command &lt;code&gt;nordvpn connect &amp;lt;server name&amp;gt;&lt;/code&gt; after installing the nordvpn client. See website of nordvpn how to install on linux.&lt;/p&gt;&#xA;" OwnerUserId="16008" LastEditorUserId="16827" LastEditDate="2019-04-20T05:40:22.993" LastActivityDate="2019-04-20T05:40:22.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16633" PostTypeId="2" ParentId="16459" CreationDate="2018-10-22T11:05:45.523" Score="0" Body="&lt;p&gt;for those wondering what happened here is the follow up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) I had to run a command to update the IDs of my hardware, something like pciids, can't remember exact command&#xA;2) once updated my 3D controller appeared with the right name Nvidia Gforce 150mx&#xA;3) After that, installed the drivers from the App Center, normally.&#xA;4) Be aware, tried to use PPA drivers and it stopped booting.&#xA;5) as I am new, I reinstalled elementaryOS and kept the normal drivers from App Center and everything is running smoothly.&lt;/p&gt;&#xA;" OwnerUserId="15869" LastActivityDate="2018-10-22T11:05:45.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16634" PostTypeId="2" ParentId="16620" CreationDate="2018-10-22T11:23:05.337" Score="0" Body="&lt;p&gt;Set the keyboard shortcut to something like super+alt+h&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install &lt;code&gt;xdotool&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then at the hot corner settings select the execute command and put in &#xA;&lt;code&gt;xdotool&lt;/code&gt; key &lt;kbd&gt;super&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;h&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is how I'm doing it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; I found that &lt;code&gt;xdotool&lt;/code&gt; actually has this built-in &lt;code&gt;xdotool getactivewindow windowminimize&lt;/code&gt; is much easier then above. cheers&lt;/p&gt;&#xA;" OwnerUserId="8465" LastEditorUserId="16827" LastEditDate="2019-01-07T12:20:51.400" LastActivityDate="2019-01-07T12:20:51.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16635" PostTypeId="1" AcceptedAnswerId="16704" CreationDate="2018-10-22T11:50:50.050" Score="0" ViewCount="83" Body="&lt;p&gt;I like using the column view but i usually want to open a folder to see something or maybe edit the properties of the folder after i open it but if i right click the opened folder, the menu does not appear until i click the back button to go back to the directory where the folder is located and then right click on the desired folder, am i missing something or is this just a bug? I'm on eOS Juno&lt;/p&gt;&#xA;" OwnerUserId="12254" LastActivityDate="2018-10-24T15:13:27.527" Title="Column View right click doesn't always work" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:52:16.353" ContentLicense="CC BY-SA 4.0" />
  <row Id="16637" PostTypeId="2" ParentId="16530" CreationDate="2018-10-22T12:33:00.700" Score="0" Body="&lt;p&gt;Tried disabling fast startup on Win10 ?&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2018-10-22T12:33:00.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16638" PostTypeId="2" ParentId="16530" CreationDate="2018-10-22T15:17:55.647" Score="0" Body="&lt;p&gt;Try to unhide grub menu.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open /etc/default/grub as sudo&lt;/li&gt;&#xA;&lt;li&gt;Set &lt;code&gt;GRUB_TIMEOUT_STYLE=menu&lt;/code&gt; (instead of hidden)&lt;/li&gt;&#xA;&lt;li&gt;Open terminal and do: &lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Reboot and you should see Grub menu. Select Windows and see if it&#xA;boots.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-22T15:17:55.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16639" PostTypeId="2" ParentId="16630" CreationDate="2018-10-22T15:50:28.110" Score="0" Body="&lt;p&gt;You can try and play with xbacklight.&#xA;Not sure if it's already installed in Elementary.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xbacklight&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add a custom command to your desired corner. Something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xbacklight -dec 100 -time 500&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This should do the trick.&#xA;I can't test it atm, but it should work. If you have any issues, just check xbacklight manual &lt;code&gt;#man xbacklight&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-22T15:50:28.110" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16641" PostTypeId="2" ParentId="16552" CreationDate="2018-10-22T16:14:14.007" Score="-1" Body="&lt;p&gt;I don't believe you can do it atm.&#xA;New features are expected, like blur, but a lot has changed since the previous version, that's why &lt;code&gt;org.pantheon.terminal.settings&lt;/code&gt; isn't found.&#xA;For some aspects, Elementary Juno final, still feels like a beta.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-10-22T19:39:21.563" LastActivityDate="2018-10-22T19:39:21.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16643" PostTypeId="2" ParentId="16480" CreationDate="2018-10-22T16:24:42.410" Score="0" Body="&lt;p&gt;Well... nice to see i'm not the only one having this problem. I installed MS fonts (msttcorefonts) and Calibri is not showing up. Pitty it had to be the most used font for MS Office docs...&#xA;Apparently Support for Type 1 fonts has been removed. Not sure if this interferes directly with that particular font, but you can try to paste a copy of the font to /usr/share/fonts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll try to see if it works when i have the time.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-22T16:24:42.410" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16645" PostTypeId="1" CreationDate="2018-10-22T17:25:33.777" Score="0" ViewCount="35" Body="&lt;p&gt;I can only run an app from the terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a simple way to get my app to show in my applications?&lt;/p&gt;&#xA;" OwnerUserId="14342" LastActivityDate="2018-10-22T18:22:19.263" Title="Need Application to show in Applications" Tags="|release-loki|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16646" PostTypeId="1" CreationDate="2018-10-22T17:43:01.750" Score="2" ViewCount="3894" Body="&lt;p&gt;I installed Elementary OS 5 &quot;Juno&quot; 64 bit GNU/Linux on my mid-2017 AVA Direct gaming desktop PC with an ASUS ROG Crosshair VI Hero AM4 x370 chipset motherboard with an AMD Ryzen 5 1600X, ASUS ROG STRIX AMD Radeon RX Vega 64, Kingston HyperX Savage 32 GB DDR4 2,666.00 MHz DIM RAM, EVGA T2 850 watt 80+ Titanium PSU. I disabled the suspend mode permanently, but after two hours after I lock my screen and I go to sleep at night, my gaming desktop PC goes into suspend mode. When I press the power button, it resumes successfully without any problems. I would like to disable suspend and hibernate mode permanently as I prefer to keep my three gaming PCs turned on and connected to the Internet via one of my virtual private networks most of the time in my bedroom. How do I permanently disable suspend and hibernate on Elementary OS 5 &quot;Juno&quot; 64 bit GNU/Linux so my gaming desktop PC stays on and connected?&lt;/p&gt;&#xA;" OwnerUserId="16013" LastActivityDate="2021-05-29T00:58:09.483" Title="How do I permanently disable suspend and hibernate modes on Elementary OS 5 &quot;Juno&quot; 64 bit?" Tags="|suspend|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16647" PostTypeId="1" CreationDate="2018-10-22T17:56:02.283" Score="3" ViewCount="584" Body="&lt;p&gt;When closing atom when it's resized to fullscreen, then restarting atom doesn't result in a window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the following steps to reproduce:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install atom from the deb (&lt;a href=&quot;https://atom.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://atom.io&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Set Atom to fullscreen&lt;/li&gt;&#xA;&lt;li&gt;Close Atom&lt;/li&gt;&#xA;&lt;li&gt;Restart Atom. It starts but there is no window...&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;To get the window back use &lt;code&gt;super + up&lt;/code&gt; (restore window size).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See the following gif, on a fresh virtualbox installation with a fresh atom install.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kkZpI.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kkZpI.gif&quot; alt=&quot;gif&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8317" LastActivityDate="2019-02-13T23:53:43.030" Title="Bug, fullscreen Atom. The window is *hidden*" Tags="|release-juno|window-management|" AnswerCount="3" CommentCount="0" ClosedDate="2019-05-13T07:01:46.377" ContentLicense="CC BY-SA 4.0" />
  <row Id="16648" PostTypeId="2" ParentId="16645" CreationDate="2018-10-22T18:15:19.767" Score="1" Body="&lt;p&gt;In app menu? Sure there is.&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;App Editor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install it, configure icon, app name and shortcut, and your set.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-10-22T18:22:19.263" LastActivityDate="2018-10-22T18:22:19.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16650" PostTypeId="2" ParentId="10967" CreationDate="2018-10-22T19:00:25.797" Score="1" Body="&lt;p&gt;I would keep SD cards fat32 format. You can install gparted and format it. unmount it first than format the SD card. I do not know what you would gain from ntfs on a SD card.&lt;/p&gt;&#xA;" OwnerUserId="16016" LastActivityDate="2018-10-22T19:00:25.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16655" PostTypeId="2" ParentId="15561" CreationDate="2018-10-22T21:50:20.557" Score="1" Body="&lt;p&gt;There is an update that fixes this issue. Just update in AppCentre or run the following commands in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt full-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14536" LastEditorUserId="26" LastEditDate="2018-11-30T20:43:29.027" LastActivityDate="2018-11-30T20:43:29.027" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16657" PostTypeId="2" ParentId="1868" CreationDate="2018-10-23T00:14:54.930" Score="0" Body="&lt;p&gt;If UFW firewall is enabled, look at /var/log/ufw.log with text editor. Go to bottom of file and see if vpn ip address is being blocked. If so, add rule to ufw allowing in from that ip address.&lt;/p&gt;&#xA;" OwnerUserId="7390" LastActivityDate="2018-10-23T00:14:54.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16658" PostTypeId="2" ParentId="16345" CreationDate="2018-10-23T00:23:30.637" Score="1" Body="&lt;p&gt;Try the install without adding 'third-party' drivers during install process (checkbox). This should then cause the use of the basic Ubuntu video driver(s).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note, I have installed this OS in all versions many times...sometimes the initial boot process takes a little longer than normal. It might be a simple case of delayed gratification solved by waiting a bit longer... I can't say why but perhaps someone with real OS knowledge can answer...HTH&lt;/p&gt;&#xA;" OwnerUserId="7390" LastActivityDate="2018-10-23T00:23:30.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16659" PostTypeId="1" CreationDate="2018-10-23T02:01:52.103" Score="1" ViewCount="1361" Body="&lt;p&gt;Just installed Juno on a 2013 MacBook Air. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's got a Broadcom 4360 wireless chip, which works great on the Live CD/USB, but the driver isn't there after install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a simple way to get wireless working on this device without having internet access?&lt;/p&gt;&#xA;" OwnerUserId="16022" LastActivityDate="2019-11-29T21:00:25.620" Title="Broadcom 4360 Wifi (2013 MacBook Air) on Juno?" Tags="|wifi|drivers|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16660" PostTypeId="2" ParentId="16647" CreationDate="2018-10-23T02:41:14.927" Score="4" Body="&lt;p&gt;The same thing also happens with Brave (browser). It's clear that the window is maximized, as the panel at the top becomes black. If you click and drag down just below the black panel, the program window restores to a non-maximized size and becomes visible. If you maximize it again, it'll work correctly until will close the window again.&lt;/p&gt;&#xA;" OwnerUserId="8810" LastActivityDate="2018-10-23T02:41:14.927" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16663" PostTypeId="2" ParentId="16659" CreationDate="2018-10-23T04:42:16.127" Score="0" Body="&lt;p&gt;You need to install bcmwl-kernel-source package somehow.&#xA;Possible solutions are..&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;If you have smartphone, share its connection via Bluetooth or USB, and install bcmwl-kernel-source package from AppCenter or &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Temporarily copy cdrom line on /etc/apt/sources.list in Live environment to your installed environment and &lt;code&gt;sudo apt update  &amp;amp;&amp;amp; sudo apt install bcmwl-kernel-source&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2018-10-23T04:42:16.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16664" PostTypeId="2" ParentId="16557" CreationDate="2018-10-23T04:55:29.173" Score="1" Body="&lt;p&gt;Press &lt;code&gt;e&lt;/code&gt; on grub boot screen and add &lt;code&gt;nouveau.modeset=0&lt;/code&gt; on kernel boot parameter.&#xA;See if it fixes your video problem.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2018-10-23T04:55:29.173" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16665" PostTypeId="1" CreationDate="2018-10-23T05:10:21.287" Score="2" ViewCount="263" Body="&lt;p&gt;So for some reason, the Camera application in Juno is not initializing my webcam and then freezes after a few seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When ran in the terminal, the following message appears:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;(io.elementary.camera:9327): Clutter-Gst-WARNING **: 22:00:44.437: Internal data stream error.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any other video application has no issue opening the video device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was not an issue in Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the information on my Camera:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;description: Video&#xA;product: Integrated_Webcam_HD&#xA;vendor: CN06307G7248761BE247A03&#xA;physical id: 4&#xA;bus info: usb@1:4&#xA;version: 57.28&#xA;capabilities: usb-2.00&#xA;configuration: driver=uvcvideo maxpower=500mA speed=480Mbit/s&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2019-05-06T01:18:08.200" Title="Camera Application freezes on Juno but not Loki" Tags="|applications|release-juno|camera|" AnswerCount="1" CommentCount="2" ClosedDate="2019-05-06T05:05:53.633" ContentLicense="CC BY-SA 4.0" />
  <row Id="16670" PostTypeId="1" AcceptedAnswerId="16671" CreationDate="2018-10-23T12:07:25.823" Score="0" ViewCount="53" Body="&lt;p&gt;When I installed Juno, I already had Win7 and Loki running. I wanted to replace Loki with Juno but was not given that choice. It was &quot;run alongside&quot; or &quot;replace all.&quot; Now I have all three running, which crowds my little notebook. &lt;/p&gt;&#xA;" OwnerUserId="16030" LastActivityDate="2018-10-23T12:21:01.723" Title="Dual boot issue" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16671" PostTypeId="2" ParentId="16670" CreationDate="2018-10-23T12:21:01.723" Score="0" Body="&lt;p&gt;Try to remove Loki and Juno partition from the installer and start fresh.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-23T12:21:01.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16672" PostTypeId="2" ParentId="16530" CreationDate="2018-10-23T13:14:13.510" Score="0" Body="&lt;p&gt;Problem solved. boot-repair just stops and warns if &lt;strong&gt;any&lt;/strong&gt; Windows drive is in SFS mode, or Dynamic mode, not just the ones you are trying to install Grub into.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just set the the Windows drive as boot drive in the bios, log in, reformat the drive as non dynamic, restart with boot-repair, repair, and voilà.&lt;/p&gt;&#xA;" OwnerUserId="15928" LastActivityDate="2018-10-23T13:14:13.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16674" PostTypeId="2" ParentId="11948" CreationDate="2018-10-23T15:17:12.093" Score="0" Body="&lt;p&gt;If you are using zsh you can just use&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bindkey &quot;^[k&quot; clear-screen&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Works just as well and no need to define a function.&lt;/p&gt;&#xA;" OwnerUserId="16032" LastActivityDate="2018-10-23T15:17:12.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16675" PostTypeId="2" ParentId="15735" CreationDate="2018-10-23T15:27:39.607" Score="1" Body="&lt;p&gt;How about this? &lt;a href=&quot;https://drive.google.com/file/d/1TVOKt5NhFnnj1U8XItzjvrzlos64Mo-Y/view&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary OSX&lt;/a&gt;&#xA;Just follow instructions and copy folders to their respective places. It looks gorgeous. Icons, GTK and Plank themes.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-23T15:27:39.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16676" PostTypeId="2" ParentId="12565" CreationDate="2018-10-23T16:00:04.907" Score="-1" Body="&lt;p&gt;Does this printer driver work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please check. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;a href=&quot;http://localhost:631&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631&lt;/a&gt; to add the printer. Please see &lt;code&gt;/etc/cups/cupsd.conf&lt;/code&gt; to identify the default port. Look for &lt;code&gt;Listen&lt;/code&gt; keyword.&lt;/p&gt;&#xA;" OwnerUserId="16001" LastEditorUserId="16827" LastEditDate="2020-01-02T05:28:20.857" LastActivityDate="2020-01-02T05:28:20.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16677" PostTypeId="2" ParentId="16552" CreationDate="2018-10-23T16:56:53.153" Score="4" Body="&lt;p&gt;These are the commands you're looking for:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings tab-bar-behavior 'Always Show Tabs'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings tab-bar-behavior 'Hide When Single Tab'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings tab-bar-behavior 'Never Show Tabs'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="15933" LastActivityDate="2018-10-23T16:56:53.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16678" PostTypeId="1" CreationDate="2018-10-23T17:06:43.457" Score="0" ViewCount="925" Body="&lt;p&gt;The system update stopped working, and now i can't update it nor from terminal nor from the via app store.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This what happens when i update from the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/O3YVa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O3YVa.png&quot; alt=&quot;This what happens when i update from the app store: &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This what happens when i update from the &lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt;:&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1iFyY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1iFyY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;" OwnerUserId="16033" LastEditorUserId="16827" LastEditDate="2019-01-07T12:08:48.730" LastActivityDate="2019-10-04T20:01:35.533" Title="How do I remove a broken apt repo?" Tags="|updates|sudo|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16682" PostTypeId="1" CreationDate="2018-10-23T19:09:54.813" Score="0" ViewCount="667" Body="&lt;p&gt;Under Loki, my HP LaserJet 1012 connected and worked without any setup or issues but under Juno it doesn't seem to want to connect. Any ideas on how to get it working? I tried the add a printer button but it didn't seem to want to work afterwards.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2019-04-24T05:01:20.200" Title="USB Printer not connecting in Juno" Tags="|release-juno|printer|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="16683" PostTypeId="2" ParentId="16678" CreationDate="2018-10-23T19:22:06.463" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:mpstark/elementary-tweaks-daily &amp;amp;&amp;amp; sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And if you want to use elementary-tweaks use &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;. It's a fork of the one you've been trying to add but with more settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, you seem to be using Juno beta. You might want to update to the stable version since it's already out!&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-23T19:22:06.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16684" PostTypeId="1" CreationDate="2018-10-23T19:43:10.283" Score="0" ViewCount="200" Body="&lt;p&gt;I have found a few oddities with my installation of Juno:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These apps, which are all part of the basic installation, have a blank icon on the menu:    &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Calendar&lt;/li&gt;&#xA;&lt;li&gt;Mail&lt;/li&gt;&#xA;&lt;li&gt;Photos&lt;/li&gt;&#xA;&lt;li&gt;Camera&lt;/li&gt;&#xA;&lt;li&gt;Videos&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;These apps have a blank icon in System Settings:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Applications&lt;/li&gt;&#xA;&lt;li&gt;Power&lt;/li&gt;&#xA;&lt;li&gt;Sound&lt;/li&gt;&#xA;&lt;li&gt;Online Accounts&lt;/li&gt;&#xA;&lt;li&gt;Date &amp;amp; Time&lt;/li&gt;&#xA;&lt;li&gt;Parental Control&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JsVLU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JsVLU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no word-processing application by default, so I have installed Libre Office. The window decorations don't follow my choice of - O X on the right. Same applies to other applications. Can I assume elementaryOS recommends a word-processing app which would do so, and if so which is it?&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2018-10-23T20:07:42.787" LastActivityDate="2019-04-23T10:52:23.350" Title="Juno Odditiessss" Tags="|release-juno|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16685" PostTypeId="2" ParentId="16586" CreationDate="2018-10-23T20:02:22.820" Score="2" Body="&lt;p&gt;In my situation the initial keyboard recognition [it did &quot;see&quot; the KB] was stuck in my Elementary OS bluetooth panel and it would neither connect nor could I delete it. (I thought that deleting it from the panel might allow me to start trying to Pair from scratch - refreshed.) But, I could never delete it even after turning the KB  [keyboard] off and rebooting the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This morning I tried this:&#xA;1. Turn on the KB and make sure it's in Pairing mode (Press &amp;amp; hold power button until power light starts flashing.)&#xA;(Obviously I'm using a wired KB to accomplish these steps.)&#xA;2. Select it in the Elementary OS Control Panel and click the Pair button;&#xA;3. Wait a moment [a second or two but no more] and type &quot;0000&quot; then Enter;&#xA;4.Repeat this process a few times offsetting the delay time [when you enter the &quot;0000&quot; pass-phrase], just a bit +/-, each time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This finally worked for me and I'm back in business with BT KB and trackpad. When you power up your BT KB you might try to first delete it from the &quot;Nearby Devices&quot; list before you start - if possible. I'd be very interested to know if this works for you. If EOS is recognizing most BT devices then we just need the developers to implement an additional step thata will tell the user whether or not EOS is requiring a pass-phrase. With BT keyboards it definitely is, but there's no prompt that makes it obvious.&lt;/p&gt;&#xA;" OwnerUserId="15876" LastActivityDate="2018-10-23T20:02:22.820" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16689" PostTypeId="2" ParentId="16439" CreationDate="2018-10-23T22:11:49.960" Score="0" Body="&lt;p&gt;Install &lt;code&gt;xdotool&lt;/code&gt; using apt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Settings -&gt; Desktop -&gt; Hot corners, pick the hot corner you want. Choose &lt;code&gt;Execute custom command&lt;/code&gt;. Put this in as the custom command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xdotool getactivewindow windowminimize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="138" LastActivityDate="2018-10-23T22:11:49.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16691" PostTypeId="1" CreationDate="2018-10-23T23:57:04.553" Score="1" ViewCount="158" Body="&lt;p&gt;I have a Lenovo Yoga 3 Pro. I just installed Juno,and everything great so far. Only thing i am noticing is that the cursor is not scaling properly. It is difficult to describe when  is the issues happening, as it is really very random. For instance, in desktop apps it shows up very small (when I select something, it shows a normal sized cursor). On websites, from Epiphany, the cursor is small, but whenever i hover over any link, again, it shows a regular sized pointer. This is very annoying really. I have followed instructions on forums, such as using dconf to fix the cursor size, but sadly had no luck. Also tried elementary-tweaks, but the issue seems to stick around. Any help on this would be really appreciated.&lt;/p&gt;&#xA;" OwnerUserId="16040" LastActivityDate="2018-10-23T23:57:04.553" Title="Juno Pointer size small on HIDPI screen" Tags="|desktop|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16694" PostTypeId="2" ParentId="16684" CreationDate="2018-10-24T03:23:56.190" Score="0" Body="&lt;p&gt;I noticed some missing icons too; subsequent reboots made them reappear and it hasn't been a problem since. I'm not sure what's going on with your particular system, but if it doesn't resolve itself with a reboot or two, I'd consider a clean reinstall. From your screenshot it looks like you've made some visual tweaks, so unfortunately you're not going to find official help from the dev team.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for an officially recommended word processor, anything that's officially recommended by the elementary OS team would be under &quot;Curated&quot; in the app store. You won't find any traditional office software in there, but Quilter is pretty great as a markdown editor. Since having the &quot;- O X&quot; isn't officially supported by elementary OS, you're not going to get an officially recommended app that works with it.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-10-24T03:23:56.190" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16695" PostTypeId="2" ParentId="16563" CreationDate="2018-10-24T07:57:42.383" Score="2" Body="&lt;p&gt;You can, but you need to use a different file viewer - Nautilus works great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install nautilus&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install folder-color&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should be able to right click folders using Nautilus and select &quot;folder color&quot; to adjust them. Here's a screenshot of mine running Juno 5.0:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JyH2Z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JyH2Z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14468" LastActivityDate="2018-10-24T07:57:42.383" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="16696" PostTypeId="2" ParentId="392" CreationDate="2018-10-24T07:59:19.523" Score="9" Body="&lt;p&gt;Starting with Juno release, the commands have all changed. They're adopting RDNN. For files:&#xA;&lt;code&gt;&#xA;io.elementary.files&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="15883" LastActivityDate="2018-10-24T07:59:19.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16698" PostTypeId="2" ParentId="16467" CreationDate="2018-10-24T09:10:40.237" Score="2" Body="&lt;p&gt;I have the same situation as @Heiko.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Casually, I installed elementary-tweaks and disabled &quot;Natural copy paste&quot; in the Terminal subsection and now I can copy&amp;amp;paste with middle click from any app to the Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This would be a workarround.&lt;/p&gt;&#xA;" OwnerUserId="15597" LastActivityDate="2018-10-24T09:10:40.237" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16699" PostTypeId="2" ParentId="16659" CreationDate="2018-10-24T09:11:48.717" Score="1" Body="&lt;p&gt;When you boot from the install media, wifi works.&#xA;So you could also reboot on the install media (cdrom, usb-key, or usb-hdd..)&#xA;chroot into your installed system and then &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;. After that you can reboot, unplug install media, &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; will still be installed on your system, wifi will work normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To chroot, boot from the install media, open a terminal, mount your installed system on &lt;code&gt;/media/target&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mkdir /media/target &amp;amp;&amp;amp; sudo mount /dev/sda2 /media/target&#xA;$ sudo mount ‐‐bind /dev /media/target/dev&#xA;$ sudo mount ‐‐bind /proc /media/target/proc&#xA;$ sudo mount ‐‐bind /sys /media/target/sys&#xA;$ sudo chroot /media/target&#xA;$ sudo apt install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16048" LastEditorUserId="19585" LastEditDate="2019-11-29T21:00:25.620" LastActivityDate="2019-11-29T21:00:25.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16700" PostTypeId="1" CreationDate="2018-10-24T10:46:08.377" Score="3" ViewCount="1007" Body="&lt;p&gt;I'm using Chrome browser. During video play eg. Youtube, picture is freezing but sound still goes on until I move mouse. After this it's ok for few seconds then again video is freezing. I have Intel i7 with Intel HD 620 graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found workaround on reddit that you have to disable hardware acceleration in Chrome settings. But then I have screen tearing...&lt;/p&gt;&#xA;" OwnerUserId="7067" LastEditorUserId="7067" LastEditDate="2018-10-24T13:20:58.237" LastActivityDate="2019-11-23T09:15:44.050" Title="Video on Chrome freezing" Tags="|release-juno|google-chrome|videos|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16702" PostTypeId="2" ParentId="16682" CreationDate="2018-10-24T14:30:47.723" Score="0" Body="&lt;p&gt;I just reinstalled the laptop from Loki to Juno...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got the problem with that my phone is not charging anymore when i will connect the cable to the laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens - i will connect the phone to the usb, phone will show charging, juno will show the accessible device in device-list of files, ...and in one second phone is disconnected from power and stop charging. When i will click in device list to open this phone, it will &quot;mount&quot; the phone even if the phone is selected to &quot;charging mode&quot; and in that moment phone is charging again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it is the same issue with your printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably Juno will try to read-up the connected device for a second and after that it is turning off the powersupply to device... :/&lt;/p&gt;&#xA;" OwnerUserId="9683" LastActivityDate="2018-10-24T14:30:47.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16703" PostTypeId="2" ParentId="16591" CreationDate="2018-10-24T14:47:09.590" Score="1" Body="&lt;p&gt;&lt;strong&gt;Resolved&lt;/strong&gt;&#xA;In turns out windows 10 wasn't 'letting go' of my NIC on shutdown, before booting into the Elementary live usb, so elementary couldn't connect to my router.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Switching off my PC by the PSU resolved it.&lt;/p&gt;&#xA;" OwnerUserId="15978" LastActivityDate="2018-10-24T14:47:09.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16704" PostTypeId="2" ParentId="16635" CreationDate="2018-10-24T15:13:27.527" Score="0" Body="&lt;p&gt;This sounds like a duplicate of this bug:&#xA;&lt;a href=&quot;https://github.com/elementary/files/issues/602&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/602&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A fix for this has already been submitted for review, approval and merging.  Hopefully it will be fixed in the released version soon.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-10-24T15:13:27.527" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16705" PostTypeId="2" ParentId="16603" CreationDate="2018-10-24T15:19:41.467" Score="1" Body="&lt;p&gt;There is an outstanding bug that means a right-click does not always focus the item you are clicking on (see &lt;a href=&quot;https://github.com/elementary/files/issues/602&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/602&lt;/a&gt;).  As a temporary workaround, make sure the item has a blue background (i.e. it is focused and selected) before right-clicking.  You can do this by using the primary (left) button to select on the helper or (in ColumnView where you are clicking on other than the current column) the keyboard to focus and select.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a fix for this already submitted for approval and merging.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-10-24T15:19:41.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16706" PostTypeId="2" ParentId="16603" CreationDate="2018-10-24T15:21:46.530" Score="1" Body="&lt;p&gt;With regard to &quot;Desktop Icons&quot;, elementaryos does not support putting shortcuts or other icons onto the desktop I am afraid. &lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-10-24T15:21:46.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16708" PostTypeId="2" ParentId="392" CreationDate="2018-10-24T15:37:21.530" Score="0" Body="&lt;p&gt;The use of &lt;code&gt;io.elementary&lt;/code&gt; or &lt;code&gt;io.pantheon&lt;/code&gt;, etc just complicates things. It's much easier to do a &lt;code&gt;#gedit file.txt&lt;/code&gt; than &lt;code&gt;#io.elementary.code file.txt&lt;/code&gt;. Oh well...&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-10-24T17:07:04.340" LastActivityDate="2018-10-24T17:07:04.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16711" PostTypeId="1" AcceptedAnswerId="30063" CreationDate="2018-10-24T17:18:25.520" Score="1" ViewCount="92" Body="&lt;p&gt;In most editors it's possible to perform a search within the open folder/project. How can this be achieved with Code in Juno, if at all possible?&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2022-12-27T12:50:24.257" Title="Code - How to &quot;search in project&quot;" Tags="|code|search|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16713" PostTypeId="2" ParentId="16582" CreationDate="2018-10-24T17:58:10.027" Score="0" Body="&lt;p&gt;It's not possible to change that since it depends on how it was translated. There's a bug reported already about it.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-24T17:58:10.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16715" PostTypeId="2" ParentId="15525" CreationDate="2018-10-24T20:48:31.357" Score="2" Body="&lt;p&gt;You can fix this by installing 'Dconf editor' from the AppCentre.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open  this program and go to &lt;em&gt;org&gt;gnome&gt;settings-daemon&gt;plugins&gt;media-keys&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Scroll all the way down to where you find &lt;em&gt;'volume-down'&lt;/em&gt; and &lt;em&gt;'volume-up'&lt;/em&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you click on these you will get a list with options,at the bottom you can toggle the option &lt;em&gt;'use default value'&lt;/em&gt; to &lt;strong&gt;ON&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This will revert the keyboard shortcuts back to the original volume keys. &lt;/p&gt;&#xA;" OwnerUserId="16058" LastActivityDate="2018-10-24T20:48:31.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16717" PostTypeId="1" CreationDate="2018-10-25T04:54:50.837" Score="0" ViewCount="148" Body="&lt;p&gt;Use Juno release. I have a laptop and often connect an external monitor to it. When an external monitor is connected, I make it primary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I added hotkeys/commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Win+PageUp: xrandr --output eDP-1 --primary&#xA;Win+PageDown: xrandr --output HDMI-1 --primary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works well. But Dock (Plank) move with delay. Can I fix this? Add command for Plank?&lt;/p&gt;&#xA;" OwnerUserId="13304" LastActivityDate="2019-12-12T11:01:10.167" Title="Quick move plank to primary monitor" Tags="|display|plank|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16718" PostTypeId="2" ParentId="9351" CreationDate="2018-10-25T05:32:33.933" Score="1" Body="&lt;p&gt;In console:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bluetoothctl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Connect bluetooth device and see in console. Example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[CHG] Device 00:1F:20:E1:B3:B7 Connected: yes&#xA;[CHG] Device 00:1F:20:E1:B3:B7 ServicesResolved: yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Copy device code. Trust this device:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trust 00:1F:20:E1:B3:B7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source &lt;a href=&quot;https://pctuner.club/n/2415&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pctuner.club/n/2415&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13304" LastActivityDate="2018-10-25T05:32:33.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16721" PostTypeId="1" AcceptedAnswerId="17153" CreationDate="2018-10-25T09:55:40.893" Score="1" ViewCount="1198" Body="&lt;p&gt;I did a fresh install of Juno on a laptop that I previously used with Loki. However, after the installation finishes and the laptop reboots, I get just black screen with a message about missing boot device (see screen 1).&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y7mcn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y7mcn.jpg&quot; alt=&quot;Screen 1&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After pressing &lt;kbd&gt;Enter&lt;/kbd&gt;, I get to a second screen with list of two options - shim and grub. Choosing any of them returns me to screen 1. In other words - &lt;strong&gt;I cannot boot into the freshly installed system&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E09uZ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E09uZ.jpg&quot; alt=&quot;Screen 2&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If I insert live USB (created using the &lt;a href=&quot;https://www.pendrivelinux.com/yumi-multiboot-usb-creator/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MultiBoot tool&lt;/a&gt; that I successfully use for years), it sometimes shows a new option on the list with name of my USB drive. Selecting it sends me to MultiBoot menu, where I can boot into my live Linux distributions.&lt;/p&gt;&#xA;&lt;p&gt;If I start a live session of, e.g., elementary OS, I can see that the &lt;em&gt;/boot/efi&lt;/em&gt; folder of the installed system is completely empty. This shouldn't be the case as I have UEFI and secure boot enabled (I had this setup in Loki too).&lt;/p&gt;&#xA;&lt;p&gt;I remember that I had booting problems on this machine also after installing Loki, however based on my notes and weak memory I solved them quite easily by just selecting both shim and grub options consecutively. This however doesn't have any effect in Juno.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to fix this e.g. by copying the missing files from somewhere in the live session? And if so, from where can I copy these files?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;System:&lt;/strong&gt; Acer Aspire One Cloudbook 11 - netbook with 32 GB eMMC storage with those weird partition names like &lt;code&gt;mmcblk0&lt;/code&gt; or &lt;code&gt;mmcblk0boot0&lt;/code&gt; instead of (I guess) &lt;code&gt;sda&lt;/code&gt; or &lt;code&gt;sda1&lt;/code&gt; (respectively). &lt;code&gt;sudo parted -l&lt;/code&gt; shows two partitions on &lt;code&gt;mmcblk0&lt;/code&gt; - one fat32-formated EFI partition and one ext4-formated partition with the installed system.&lt;/p&gt;&#xA;&lt;h1&gt;Update:&lt;/h1&gt;&#xA;&lt;p&gt;I tried to run Boot Repair utility from LiveUSB and it didn't work, the log is here:&#xA;&lt;a href=&quot;http://paste.ubuntu.com/p/f72xMvBTtn/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/p/f72xMvBTtn/&lt;/a&gt;&#xA;(dropbox backup: &lt;a href=&quot;https://www.dropbox.com/s/vk16exwmcmorj5x/boot-repair_cloudbook.txt?dl=0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dropbox.com/s/vk16exwmcmorj5x/boot-repair_cloudbook.txt?dl=0&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;p&gt;I also found a thread on Linux Mint forums with almost identical symptoms (Acer laptop, same error message, no access to BIOS, only his OS is 16.04-based):&#xA;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=269299&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.linuxmint.com/viewtopic.php?t=269299&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;However I cannot access BIOS (I don't have older version of Juno available, like he had with LM) so I cannot use his solution.&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="482" LastEditDate="2023-03-14T11:08:43.203" LastActivityDate="2023-03-14T11:09:16.150" Title="Empty /boot/efi after a fresh install of elementary OS 5.0 (Juno)" Tags="|boot|release-juno|uefi|efi|secure-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16722" PostTypeId="2" ParentId="16435" CreationDate="2018-10-25T12:24:10.317" Score="2" Body="&lt;p&gt;While i'm also very concerned about color switchboard plugin being gone (i'm a photographer so i make a substantial use of color profiles) i did some digging and found this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-display/issues/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-display/issues/5&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like Elementary wants to move setting color profiles from &quot;Color&quot; settings to &quot;Display&quot; settings. As a result switchboard-plug-gcc-color package is completely gone from Juno repos. So is this transition a bug or work in progress?&lt;/p&gt;&#xA;" OwnerUserId="16068" LastActivityDate="2018-10-25T12:24:10.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16723" PostTypeId="2" ParentId="16659" CreationDate="2018-10-25T12:31:04.000" Score="1" Body="&lt;p&gt;connect via ethernet and run update, the driver is included in it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;bcmwl-kernel-source&#xA;    Broadcom 802.11 Linux STA wireless driver source&#xA;    Version: 6.30.223.271+bdcom-0ubuntu1~1.3&lt;/p&gt;&#xA;" OwnerUserId="16069" LastActivityDate="2018-10-25T12:31:04.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16724" PostTypeId="2" ParentId="16571" CreationDate="2018-10-25T13:46:35.820" Score="2" Body="&lt;p&gt;I'm facting similar issues on HP Spectre x360. Loki worked great, but Juno is terrible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In response to &lt;strong&gt;Unable to disable built-in monitor&lt;/strong&gt;, I have found a way to turn it off:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Find out the display names:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr | grep conn | grep -v dis&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Disable the desired display:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output &amp;lt;display&amp;gt; --off&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;On my machine, first command returned:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;eDP-1 connected 1920x1080+0+6 (normal left inverted right x axis y axis) 293mm x 165mm&#xA;DP-1 connected primary 2560x1440+1920+0 (normal left inverted right x axis y axis) 553mm x 311mm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then to switch off the primary laptop built-in display I simply did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I know it is not a solution but it is a start. I am intrigued by your other problems too so it is a scenario that I will be testing next.&lt;/p&gt;&#xA;" OwnerUserId="14458" LastActivityDate="2018-10-25T13:46:35.820" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16725" PostTypeId="1" CreationDate="2018-10-25T13:54:55.243" Score="0" ViewCount="268" Body="&lt;p&gt;I'm trying to switch my computer from Windows to Elementary OS.  It's just so much of a hassle to keep up with updates that I don't even have the storage space for.  I'm trying to do this on a Lenovo IdeaPad 110S which has the following specs:&#xA;Intel Celeron - 2GB Memory - 32GB eMMC Flash Memory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a bootable USB which works fine on my office computer but doesn't boot on the Lenovo.  I hold down  &amp;amp;  which brings me to a boot menu but after selecting the USB all I get is a black screen that just hangs there.  I used RUFUS and downloaded the latest Elementary.  Anyone have any idea as to why it's not working on my Lenovo? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16071" LastActivityDate="2019-04-25T08:01:30.367" Title="Elementary won't boot off USB Drive" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16727" PostTypeId="1" AcceptedAnswerId="17797" CreationDate="2018-10-25T16:36:25.083" Score="1" ViewCount="1556" Body="&lt;p&gt;I've got an new installation of Juno, but since I installed the proprietary nvidia driver 396, Juno goes black/blank after the initial splash screen. Loki functioned fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The odd thing is, that after several hard resets Juno does show the greeter from time to time - it seems very random.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried different commands to modify the boot from Grub, but nothing has helped this far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody have a solution to get past the blank screen when I wan't to use the nvidia-driver, or any idea what the problem might be?&lt;/p&gt;&#xA;" OwnerUserId="2835" LastEditorUserId="2835" LastEditDate="2019-01-03T14:59:20.477" LastActivityDate="2019-01-03T14:59:20.477" Title="Juno keeps booting into a blank screen" Tags="|boot|greeter|release-juno|grub|nvidia|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16730" PostTypeId="2" ParentId="16682" CreationDate="2018-10-25T17:57:56.370" Score="1" Body="&lt;p&gt;I found a fix. I manually added the printer using the + button on the printer menu in Settings and finding it in the list, then enabled it and set it as default. Then I opened the terminal and used lpq to configure it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The commands I used are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;lpq enable&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;lpq up&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I was able to print from LibreOffice without issues.&lt;/p&gt;&#xA;" OwnerUserId="4128" LastActivityDate="2018-10-25T17:57:56.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16732" PostTypeId="2" ParentId="16725" CreationDate="2018-10-25T20:42:26.627" Score="0" Body="&lt;p&gt;As the developers state on &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;the installation page of their website&lt;/a&gt; these are the recommended system requirments for &lt;em&gt;elementary OS&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dualcore 64bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Even though they clearly say, these are not the required specifications for running elementary os, maybe it's not the distro you want to choose for your system in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However have you already tried different usb ports on your device and reinstalling the .iso to the usb drive (maybe using a different program to do that)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&#xA;Have you already read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16542/unable-to-install-elementary-juno-on-lenovo-ideapad-120s&quot;&gt;this post&lt;/a&gt;? The guy fixed a very similar problem by updating his BIOS-Firmware, maybe that does the job for you aswell.&lt;/p&gt;&#xA;" OwnerUserId="15563" LastEditorUserId="15563" LastEditDate="2018-10-25T20:53:39.883" LastActivityDate="2018-10-25T20:53:39.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16733" PostTypeId="1" CreationDate="2018-10-25T20:50:35.327" Score="1" ViewCount="72" Body="&lt;p&gt;I have just installed Elementary OS 5 in a virtual machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I am a fan of guest user login I checked the user account settings and noticed that guest login is enabled by default. However, when I log off I do not see a login option for the guest user at the login screen. The only option to log in as a guest is to enable the automatic login for the guest user and then reboot the machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why do I not see a login option for the guest at the login screen?&lt;/p&gt;&#xA;" OwnerUserId="16078" LastActivityDate="2018-10-25T20:50:35.327" Title="Why do I not see a login option for the guest at the login screen?" Tags="|greeter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16734" PostTypeId="2" ParentId="16646" CreationDate="2018-10-25T22:12:08.707" Score="4" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open up the terminal and type this in and your password:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change your directory to &lt;code&gt;/etc/default&lt;/code&gt;. Type in these commands:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo cp /etc/default/acpi-support /etc/default/acpi-support.bak&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install gedit&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo gedit /etc/default/acpi-support&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for the line &lt;code&gt;SUSPEND_METHODS=&lt;/code&gt;. Type this in and save the document:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;SUSPEND_METHODS=&quot;none&quot;&lt;/code&gt;&#xA;*. exit gedit&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart your desktop, notebook or server to make the changes take into&#xA;effect.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16013" LastEditorUserId="12279" LastEditDate="2019-03-07T00:12:10.913" LastActivityDate="2019-03-07T00:12:10.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16736" PostTypeId="1" CreationDate="2018-10-26T01:36:16.410" Score="0" ViewCount="287" Body="&lt;p&gt;I am trying to install elementary os 5.0 juno from an usb and that didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i have used differents USBs and Rufus and Unetbooting and nothing works :,v&#xA;With a DVD is the same. Actually i have installed Win 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the message i get after i press &quot;Try elementary..&quot; or &quot;Install elementary..&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VHj7w.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VHj7w.jpg&quot; alt=&quot;Kernel panic&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm new in linux so i don't know about this os or what to do :,,v&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a intel core 2 duo&#xA;4 GB of ram.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previously i used elementary os loki, and it worked perfectly but now i can't install juno :,v&lt;/p&gt;&#xA;" OwnerUserId="16081" LastEditorUserId="16081" LastEditDate="2018-10-26T04:01:26.397" LastActivityDate="2024-04-04T15:05:35.817" Title="Can't install elementary os 5.0 juno - kernel panic using live usb or dvd boot" Tags="|boot|kernel|dvd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16737" PostTypeId="2" ParentId="16332" CreationDate="2018-10-26T05:20:12.673" Score="3" Body="&lt;p&gt;I confirm the same behaviour, but don't believe it to be a Linux issue, rather a Firefox issue/setting upstream.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open new tab in Firefox and type &lt;code&gt;about:config&lt;/code&gt; in the address bar.&lt;/li&gt;&#xA;&lt;li&gt;Accept the warning displayed.&lt;/li&gt;&#xA;&lt;li&gt;Search for &lt;code&gt;ui.context_menus.after_mouseup&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Change it from &lt;code&gt;false&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Close tab and test.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;References:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I stumbled on the solution above @ &lt;a href=&quot;https://www.reddit.com/r/firefox/comments/8uyoic/unwanted_context_menu_behaviour_after_update_to/&quot; rel=&quot;nofollow noreferrer&quot;&gt;reddit&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="14458" LastEditorUserId="14458" LastEditDate="2018-10-26T21:21:38.777" LastActivityDate="2018-10-26T21:21:38.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16738" PostTypeId="2" ParentId="10415" CreationDate="2018-10-26T07:12:27.117" Score="0" Body="&lt;p&gt;Mike Wild's solution also works in Juno. I checked my installed packages and &lt;strong&gt;python-gobject-2&lt;/strong&gt; was installed (not sure which app installed it or if it's part of Juno). Once I installed &lt;strong&gt;python-gobject&lt;/strong&gt;, then Cumulus worked.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-10-26T07:12:27.117" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16740" PostTypeId="1" AcceptedAnswerId="16752" CreationDate="2018-10-26T09:42:50.757" Score="2" ViewCount="1067" Body="&lt;p&gt;juno,'Files' app, is it possible to go back to previous or upper level folder, by press 'backspace' key?&#xA;BR.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2019-02-04T10:23:32.023" Title="how to make backspace work in 'files'" Tags="|pantheon-files|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16741" PostTypeId="2" ParentId="16740" CreationDate="2018-10-26T10:31:51.700" Score="1" Body="&lt;p&gt;&lt;code&gt;&amp;lt;Alt&amp;gt;Up&lt;/code&gt; is the keyboard shortcut you're looking for. As far as I know, &lt;code&gt;backspace&lt;/code&gt; does nothing. If you want to change the keyboard shortcut, I think your only option is to change it in the source code and compile locally.&lt;/p&gt;&#xA;" OwnerUserId="15933" LastActivityDate="2018-10-26T10:31:51.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16744" PostTypeId="1" CreationDate="2018-10-26T16:38:03.983" Score="0" ViewCount="422" Body="&lt;p&gt;Since I've upgraded to Juno. My battery is draining faster than ever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually, my laptop stays on for 4 hrs with 100% Charge now it's reduced to 2 hrs. &lt;/p&gt;&#xA;" OwnerUserId="15973" LastEditorUserId="15973" LastEditDate="2018-10-26T16:43:16.310" LastActivityDate="2018-10-26T21:41:28.867" Title="Battery draining faster after installing Juno" Tags="|release-juno|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16745" PostTypeId="1" CreationDate="2018-10-26T16:55:20.953" Score="1" ViewCount="16" Body="&lt;p&gt;Does anyone have any idea on how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OwgZI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OwgZI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FolHv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FolHv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16092" LastActivityDate="2018-10-26T16:55:20.953" Title="Green border for emoticons" Tags="|system|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16746" PostTypeId="1" CreationDate="2018-10-26T17:30:43.447" Score="2" ViewCount="3361" Body="&lt;p&gt;I installed PlayOnLinux 4.2.12 from the AppCenter on elementary OS 5 Juno.  Each window/dialog of POL displays twice with one window inside the other.  When I bring up the install dialog.  The inner window for that window does not display all the controls on the window, and makes it unusable.  I have need to run a windows app that is needed for work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have run Luna since 2013 and POL works great with Luna (And thus I have been able to install and use the needed application).  I am unable at this time to do the same in Juno.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help on how to get PlayOnLinux to display correctly would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="16035" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:22.140" LastActivityDate="2020-06-01T08:08:33.860" Title="PlayOnLinux windows/dialogs display incorrectly in elementary OS Juno" Tags="|release-juno|playonlinux|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="16747" PostTypeId="1" CreationDate="2018-10-26T17:38:51.603" Score="0" ViewCount="109" Body="&lt;p&gt;I tried to install my HP 2049 printer on EOS with hplip, but I get the error message that my firewall is blocking it. But I don't use a firewall in EOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!!&lt;/p&gt;&#xA;" OwnerUserId="16093" LastActivityDate="2024-03-12T15:09:11.087" Title="can not install my wifi HP printer 2049" Tags="|printer|hp|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16748" PostTypeId="1" AcceptedAnswerId="16751" CreationDate="2018-10-26T18:42:00.293" Score="0" ViewCount="156" Body="&lt;p&gt;Is there an official list of keyboard shortcuts.  The main elementary website shows a few but that's it.&lt;/p&gt;&#xA;" OwnerUserId="16095" LastActivityDate="2018-10-26T22:56:45.960" Title="List of all keyboard shortcuts" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16749" PostTypeId="2" ParentId="16725" CreationDate="2018-10-26T21:28:22.993" Score="1" Body="&lt;p&gt;Found the issue: There was a BIOS option marked &quot;Secure Boot&quot; or something like that. I'm unsure what it does but I decided to disable it and BINGO.&lt;/p&gt;&#xA;" OwnerUserId="16071" LastActivityDate="2018-10-26T21:28:22.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16750" PostTypeId="2" ParentId="16744" CreationDate="2018-10-26T21:41:28.867" Score="1" Body="&lt;p&gt;Maybe you should install tlp for some battery saving. Is helped me so much, almost +2 hour of battery life compared to windows.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16034" LastActivityDate="2018-10-26T21:41:28.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16751" PostTypeId="2" ParentId="16748" CreationDate="2018-10-26T22:56:45.960" Score="0" Body="&lt;p&gt;In Juno you can press the super key to see the shortcuts overlay. &#xA;This won't include app specific shortcuts, but we're working hard to make those more discoverable:&#xA;&lt;a href=&quot;https://github.com/orgs/elementary/projects/32&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/orgs/elementary/projects/32&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-10-26T22:56:45.960" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16752" PostTypeId="2" ParentId="16740" CreationDate="2018-10-26T22:59:15.740" Score="4" Body="&lt;p&gt;Alt left/right right is the keyboard shortcut for moving through history, just like in browsers. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-10-26T22:59:15.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16753" PostTypeId="2" ParentId="16747" CreationDate="2018-10-26T23:00:43.583" Score="0" Body="&lt;p&gt;Do you have the message: &amp;quot;printer rejects jobs&amp;quot;?&lt;/p&gt;&#xA;&lt;p&gt;I had this bug too. You have to activate the printer in the CUPS settings: http://localhost:631 in your browser.&lt;/p&gt;&#xA;" OwnerUserId="13571" LastEditorUserId="8517" LastEditDate="2023-06-16T13:20:37.520" LastActivityDate="2023-06-16T13:20:37.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16754" PostTypeId="1" CreationDate="2018-10-26T23:59:43.927" Score="1" ViewCount="108" Body="&lt;p&gt;On a fresh install of juno on my laptop, when I try to unlock my session it takes between 30s and 2m to respond.&#xA;I fill my password, sometimes I have to wait facing a black screen. Sometimes it shows the open windows, but none of the buttons and other UI elements are clickable, the time is wrong. &#xA;I was having this problem with the beta release, but now with the stable on a claen installation  the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some of my specs:&#xA;(I'm using intel video card only)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QFckp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QFckp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9706" LastActivityDate="2024-04-05T14:07:20.843" Title="Unlock session is taking a long time" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16756" PostTypeId="2" ParentId="16539" CreationDate="2018-10-27T01:04:44.320" Score="0" Body="&lt;p&gt;Jorge, Ayatana should solve that. Skype, Telegram, Megasync, etc. They all work for me, just like regular taskbar icons.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-27T01:04:44.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16757" PostTypeId="1" AcceptedAnswerId="21037" CreationDate="2018-10-27T11:43:12.907" Score="0" ViewCount="3081" Body="&lt;p&gt;I am coming from Ubuntu 18.10 where everything was working, the webcam does not seem to be detected in Juno. There is no on/off key for the webcam on the XPS as far as I know. The webcam is enabled in the BIOS and I always update to the latest versions from Dell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stock Camera app gives me a dark window while auto brightness in Settings, which I believe is governed by the webcam, does not seem to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo modprobe -a uvcvideo&lt;/code&gt; to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsblk&lt;/code&gt; gave me uvcvideo 0, I think it means Juno is not starting the webcam.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you, I am a Linux newbie, any help is very much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: when opening the Camera app, there is now the following message, while before there was just a black window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s7QmY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s7QmY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="16104" LastEditDate="2019-08-26T07:55:34.770" LastActivityDate="2019-10-27T11:17:06.263" Title="Integrated webcam not working in Juno 5.0 on Dell XPS 9550" Tags="|release-juno|camera|webcam|dell|" AnswerCount="3" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="16758" PostTypeId="2" ParentId="16513" CreationDate="2018-10-27T13:26:54.480" Score="1" Body="&lt;p&gt;2.&#xA;in System Settings / Bluetooth&#xA;you'll find a &quot;-&quot; option down in the left corner of the window.&lt;/p&gt;&#xA;" OwnerUserId="16106" LastActivityDate="2018-10-27T13:26:54.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16759" PostTypeId="1" AcceptedAnswerId="16784" CreationDate="2018-10-27T13:34:38.967" Score="0" ViewCount="358" Body="&lt;p&gt;I've recently installed Juno and I simply love the clean design. Kudos. The issue I'm having is trying to connect to my work VPN. I installed &lt;strong&gt;openconnect&lt;/strong&gt; and &lt;strong&gt;NetworkManager-openconnect&lt;/strong&gt;, but the only option I see when adding a new VPN connection is OpenVPN. I'm specifically looking for Juniper or Cisco compatible connections.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to connect via terminal. In all honesty I'm not sure if it worked. Is that the same thing as having a connection through the GUI. It's a silly question, but doing VPN outside of a GUI is new to me.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;openconnect --juniper URL -u USERNAME&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I'm new to Pantheon desktop and all my search results aren't helping. I figured since the desktop was based on GNOME that the process would be the same on my Fedora box, but it's different. What am I missing here? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16075" LastActivityDate="2018-10-28T17:46:54.373" Title="Unable to Create a Juniper VPN connection" Tags="|release-juno|vpn|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16760" PostTypeId="1" CreationDate="2018-10-27T13:43:41.633" Score="0" ViewCount="387" Body="&lt;p&gt;my name is Francesco, i send you one question for the problem with my wifi. I Install today this OS but my Wifi don't start. My network wifi is REALTEK 8821CE and my os don't find them. If you have a solution please help me. Bye &lt;/p&gt;&#xA;" OwnerUserId="16107" LastActivityDate="2018-12-05T23:45:24.093" Title="Problem with my wifi netwowrk" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16761" PostTypeId="1" AcceptedAnswerId="16763" CreationDate="2018-10-27T14:53:21.827" Score="0" ViewCount="31" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3SXyH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3SXyH.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8gXH8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8gXH8.png&quot; alt=&quot;i know the video type but idk the video resolution &quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;here you can see there is no video resolution in the info page like ubuntu so if any one knows where i can find it your help is appreciated&lt;/p&gt;&#xA;" OwnerUserId="16108" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-10-27T19:09:59.707" Title="how do i know what is the video resolution in elementary os juno" Tags="|release-juno|ubuntu|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16762" PostTypeId="2" ParentId="3042" CreationDate="2018-10-27T17:49:13.917" Score="0" Body="&lt;p&gt;i had same issue... was going around in circles.. couldn't even load a usb installer to back end the HDD version..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it was a memory issue.. i logged through tty3 and cleared out my downloads and documents and hey presto.. i only wasted 3 hours of my life!&lt;/p&gt;&#xA;" OwnerUserId="16111" LastActivityDate="2018-10-27T17:49:13.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16763" PostTypeId="2" ParentId="16761" CreationDate="2018-10-27T19:09:59.707" Score="0" Body="&lt;p&gt;If you install VLC you can open the video and then just &lt;code&gt;right click &amp;gt; codec information&lt;/code&gt; will show you the video resolution and all the data you might want to know.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-27T19:09:59.707" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16764" PostTypeId="2" ParentId="16759" CreationDate="2018-10-27T19:41:18.743" Score="0" Body="&lt;p&gt;You need to choose the PPTP protocol&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Kpsh1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kpsh1.png&quot; alt=&quot;PPTP protocol&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then just enter your login credentials on the new window:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l9GuU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l9GuU.png&quot; alt=&quot;login credentials&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-27T19:41:18.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16766" PostTypeId="1" CreationDate="2018-10-27T20:42:24.930" Score="1" ViewCount="4550" Body="&lt;p&gt;Today I installed Juno on a low-end 2016 Asus laptop with Intel i5 processor. I know nothing about Linux, this was just to replace a very slow Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I connect TV with HDMI, I get picture but no sound. I installed Pulse Audio Volume Control, as suggested on some Ubuntu forums, and when I manually chose &quot;HDMI 2&quot; as output, it worked. But only until the next time I connected the cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to make it permanent? Is it possible to install some better drivers or software?&lt;/p&gt;&#xA;" OwnerUserId="16114" LastActivityDate="2019-11-01T14:16:50.630" Title="No sound in TV over HDMI in Juno" Tags="|sound|release-juno|audio|hdmi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16768" PostTypeId="2" ParentId="16736" CreationDate="2018-10-27T21:29:17.377" Score="0" Body="&lt;p&gt;I have the same issue, my laptop just restart seconds after loading..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16444/cant-boot-on-loki-system-restart&quot;&gt;I reported my issue here, no answer yet&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2018-10-27T21:29:17.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16769" PostTypeId="2" ParentId="16727" CreationDate="2018-10-27T21:38:48.587" Score="0" Body="&lt;p&gt;maybe try to uninstall the nvidia drivers, see if the nouveau open source drivers works instead&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl+Alt+F1 then &lt;code&gt;sudo apt-get purge nvidia-current&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;maybe have a look there as well : &lt;a href=&quot;https://askubuntu.com/questions/206283/how-can-i-uninstall-a-nvidia-driver-completely&quot;&gt;link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2018-10-27T21:38:48.587" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16770" PostTypeId="2" ParentId="16757" CreationDate="2018-10-28T00:03:58.347" Score="1" Body="&lt;p&gt;I have a dell e7250 and same issue with the stock camera app. Cheese worked fine. Should submit a bug to github&lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2018-10-28T00:03:58.347" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16772" PostTypeId="1" CreationDate="2018-10-28T03:29:19.320" Score="2" ViewCount="3159" Body="&lt;p&gt;With Elementary OS 5 &quot;Juno&quot; 64 bit GNU/Linux installed on my three gaming PCs, I learned that both my Gigabit Ethernet and 802.11 dual-band AC Wi-Fi keep disconnecting and my VPN encrypted tunnel breaks its connection after I lock the screens or desktop monitor for twenty minutes. Is there a way for me to be able to give you technical information to troubleshoot this issue in order to solve it? I would like to be able to stay connected to the Internet and especially my VPN tunnel as I prefer to keep my PCs turned on most of the time. Is there a way to be able to get Elementary OS 5 &quot;Juno&quot; to do this?&lt;/p&gt;&#xA;" OwnerUserId="16013" LastActivityDate="2019-08-26T16:17:23.187" Title="Network and VPN consistently disconnect after locking screen for twenty minutes" Tags="|networking|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16773" PostTypeId="1" CreationDate="2018-10-28T07:07:16.030" Score="0" ViewCount="1327" Body="&lt;p&gt;I am trying to install WiFi drivers for elementary os on my stationary PC by exchanging downloaded files (ubuntu packages) using a WiFi connection from my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded several ubuntu packages (such as rtl8812au-dkms, and dependencies) to get my USB-WiFi Stick running on my stationary PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not have the possibility to connect via Ethernet, though using my laptop with WiFi connection to transfer downloaded items between two machines using an USB Data Stick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While trying to install the packages on elementary os on my stationary PC, eventually I'm getting the message that I am probably doing harmful changes. What can I do to install drivers and enable a WiFi connection on my stationary PC?&lt;/p&gt;&#xA;" OwnerUserId="16117" LastActivityDate="2019-02-02T12:30:30.947" Title="Can't get my WiFi (D-Link DWA-182 Wireless USB Adapter) running" Tags="|wifi|release-juno|usb|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16774" PostTypeId="2" ParentId="16773" CreationDate="2018-10-28T09:20:41.567" Score="0" Body="&lt;p&gt;You just need to install &lt;code&gt;rtl8812au-dkms&lt;/code&gt;. Since you don't have a internet connection on that machine you need to download the package on another machine that has internet and then copy it to the other machine. You can do it like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the machine with internet:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt download rtl8812au-dkms &amp;amp;&amp;amp; cp /var/cache/apt/archives/*dkms*  ~/Downloads&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is going to download and copy the necessary files to your Downloads folder. Please check this line when you execute that command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following NEW packages will be installed:&#xA;dkms rtl8812au-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If there are more packages listed there, please tell me before continuing with the next step. Otherwise it won't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now open your download folder and copy the 2 .deb files that appeared there to the usb stick. The files should contain &lt;code&gt;dkms&lt;/code&gt; in the name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now go to the pc that doesn't have internet and copy those files to any empty directory you want. Then press &lt;code&gt;right click &amp;gt; Open In &amp;gt; Terminal&lt;/code&gt; to open that folder on the terminal window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, install those deb files with &lt;code&gt;sudo apt install ./*.deb&lt;/code&gt; and reboot your machine :)&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2018-11-11T19:15:07.290" LastActivityDate="2018-11-11T19:15:07.290" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="16775" PostTypeId="1" AcceptedAnswerId="16776" CreationDate="2018-10-28T09:34:03.940" Score="0" ViewCount="189" Body="&lt;p&gt;I have downloaded and install elementary OS 5.0 Juno for a few days now and during that time, I think I have noticed some bugs, mostly just minor.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;For starter, every time you log in to the OS, the mouse appear in the wrong location (in the right lower angle instead of the middle of the screen, view picture).&#xA;&lt;a href=&quot;https://i.stack.imgur.com/B8UW7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B8UW7.png&quot; alt=&quot;iUsedTheKeyboadToTakeSreenShotDidntMoveTheMouse&quot;&gt;&lt;/a&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I think my Epiphany browser is in some sort of &quot;developer mode&quot;. When I try to watch videos on www.youtube.com, the Video itself turned solid red while loading, green while playing, yellow while buffering and the web page background sometimes flashes red when the comments or sugessted video are being loaded. Its not much of a big deal, since I do most web browsing in Firefox  (youtube works just fine so its not because of the web page). Epiphani version is 3.28.1. Yet to test it on anything else beside google and youtube.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ojCdg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ojCdg.png&quot; alt=&quot;https://www.youtube.com/watch?v=OdntMzdkFnk&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I don't know if this is a bug but I have notice this since Loki and its still there in Juno: you can only turn the wifi off in the wingpannel&#xA;(I think that's what it's called), after that the option text goes gray and unclikable so you have to go to the settings menu to turn it back on.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yZbWx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yZbWx.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;My device is a Dell latitude E43100 btw.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, I was just wonder if there is and addon for &quot;Code&quot; that executes and/or shows the input/out put of your currently compiling program (like an &quot;IDLE&quot; or something). I'm a beginner in Pascal coding but an addon for mutiple languages would be nice.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your time.&lt;/p&gt;&#xA;" OwnerUserId="16120" LastEditorUserId="16120" LastEditDate="2018-10-28T09:39:22.557" LastActivityDate="2018-10-28T09:47:42.833" Title="Some bugs I found + 'code' related questions" Tags="|wifi|mouse|code|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16776" PostTypeId="2" ParentId="16775" CreationDate="2018-10-28T09:47:42.833" Score="0" Body="&lt;p&gt;Regarding number 2.. did you choose to install &quot;third party software&quot; when installing elementary? Maybe you are missing some codecs and that's why you see the green screen. Youtube works for me on Epiphany.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Number 3 &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network/issues/16&quot; rel=&quot;nofollow noreferrer&quot;&gt;has already been reported&lt;/a&gt; a long time ago by me. I'm still waiting on a fix like everyone else xD&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-28T09:47:42.833" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="16781" PostTypeId="1" AcceptedAnswerId="16783" CreationDate="2018-10-28T16:36:31.943" Score="0" ViewCount="157" Body="&lt;p&gt;I've run into this issue in the past, and it's always been insidious and frustrating. It just popped up on my machine either last night or in the past few days. Randomly, when I opened a new page in Chrome, it won't render until I move the mouse.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-10-28T16:51:14.333" Title="Chrome Doesn't Render Until I Move The Cursor" Tags="|graphics|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16782" PostTypeId="2" ParentId="2001" CreationDate="2018-10-28T16:41:10.620" Score="2" Body="&lt;p&gt;Plank(Dock) has a hidden settings window for developers/OEMs.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold &lt;kbd&gt;Control&lt;/kbd&gt; and right click anywhere on the dock&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Preferences&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Docklets&quot; tab from the Dialog box that appeared&lt;/li&gt;&#xA;&lt;li&gt;Drag &quot;Desktop&quot; item to the Dock&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Boom!!&lt;/p&gt;&#xA;" OwnerUserId="15958" LastEditorUserId="15958" LastEditDate="2018-10-28T16:54:23.267" LastActivityDate="2018-10-28T16:54:23.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16783" PostTypeId="2" ParentId="16781" CreationDate="2018-10-28T16:51:14.333" Score="0" Body="&lt;p&gt;Got the same issue with Juno on Intel Kabylake CPU with Intel HD 620.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to disable GPU acceleration in settings. If that doesn't help try one more step - go to “chrome://flags” and disable “GPU Rasterization”.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-10-28T16:51:14.333" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16784" PostTypeId="2" ParentId="16759" CreationDate="2018-10-28T17:46:54.373" Score="0" Body="&lt;p&gt;On Juno (which is based on Ubuntu 18.04) you should be able to follow this guide: &lt;a href=&quot;https://grepitout.com/install-openconnect-ubuntu-vpn-client/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://grepitout.com/install-openconnect-ubuntu-vpn-client/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The GUI in elementary will look a bit different, but the funtionality is the same. I tried it myself on a VirtualBox Juno installation and it worked like a charm :)&lt;/p&gt;&#xA;" OwnerUserId="2881" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-10-28T17:46:54.373" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16787" PostTypeId="1" AcceptedAnswerId="16790" CreationDate="2018-10-28T19:09:07.763" Score="0" ViewCount="3013" Body="&lt;p&gt;How can I open elementary apps from the &lt;a href=&quot;/questions/tagged/command-line&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;command-line&amp;#39;&quot; rel=&quot;tag&quot;&gt;command-line&lt;/a&gt;? Particularly Code and Files. I already found &lt;code&gt;/usr/bin/io.elementary.files&lt;/code&gt; and &lt;code&gt;/usr/bin/io.elementary.code&lt;/code&gt;, build they are not really convenient. Also, the latter doesn't detach from the terminal, so whenever the terminal window is closed, Code does the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course I can create an alias in the &lt;code&gt;.bashrc&lt;/code&gt; file (which I did), but maybe there is a better way?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like the best route for files is adding the following line to the &lt;code&gt;.bashrc&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;alias files='/usr/bin/io.elementary.files'&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So opening a dir from the terminal would be:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;files /path/to/dir&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For code, there still is the issue of detaching.&lt;/p&gt;&#xA;" OwnerUserId="12375" LastEditorUserId="16827" LastEditDate="2019-01-07T12:16:52.167" LastActivityDate="2019-01-07T12:16:52.167" Title="Open elementary apps from the command-line" Tags="|files|command-line|code|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16788" PostTypeId="1" CreationDate="2018-10-28T19:17:56.450" Score="0" ViewCount="447" Body="&lt;p&gt;I am having trouble connecting my Microsoft Precision Mouse via bluetooth. I have been having this problem ever since I switched from an ubuntu 16.04 based distro to an ubuntu 18.04 based system (Elementary OS Juno).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried adding the mouse via Blueman with the &quot;setup&quot; option and it actually works for a few seconds during the &lt;em&gt;Pairing in progress...&lt;/em&gt; screen (see screenshot), but it then displays &lt;em&gt;Failed to add device&lt;/em&gt; screen (see screenshot) and at that point, the mouse just stops working again. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/aMFuT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aMFuT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vWAnI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vWAnI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried following the answer on this question: &lt;a href=&quot;https://askubuntu.com/questions/1034246/connecting-microsoft-surface-precision-mouse&quot;&gt;https://askubuntu.com/questions/1034246/connecting-microsoft-surface-precision-mouse&lt;/a&gt; (which worked on 16.04). But I have had no luck so far...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="15672" LastActivityDate="2019-04-14T17:32:22.873" Title="Cannot add Microsoft Precision Mouse (Juno)" Tags="|bluetooth|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16789" PostTypeId="1" CreationDate="2018-10-28T20:20:01.440" Score="0" ViewCount="177" Body="&lt;p&gt;My bluetooth tray icon will intermittently disappear and reappear, usually after returning from suspend. At the login screen I can see the icon fine; when I log in though, it will (seemingly at random) disappear. However, it's still &quot;there&quot; in that I can click on it and access bluetooth settings and whatnot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3SjoV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3SjoV.png&quot; alt=&quot;Missing completely&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Z2bmP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z2bmP.png&quot; alt=&quot;Sorta kinda still there&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TtTtD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TtTtD.png&quot; alt=&quot;Can still click on it&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/SVEVo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SVEVo.png&quot; alt=&quot;Toggled&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2023-12-10T14:07:35.910" Title="Bluetooth Tray Icon Disappears and Reappears Intermittently" Tags="|wingpanel|bluetooth|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16790" PostTypeId="2" ParentId="16787" CreationDate="2018-10-28T21:14:42.610" Score="3" Body="&lt;p&gt;Besides writing &lt;code&gt;io.elementary.code&lt;/code&gt; or creating an alias there isn't any way to open a app from the command line.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-10-28T21:14:42.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16791" PostTypeId="2" ParentId="16646" CreationDate="2018-10-28T21:28:23.347" Score="1" Body="&lt;p&gt;Please disregard my previous posts; they are not technically correct.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the solution that worked for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did quite a bit of research so I wanted to share this information with this group if someone else may find it to be helpful or useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GNOME 3.28 64 bit has a software flaw in which your desktop or notebook PC will go into suspend or sleep mode after you either lock your screen or leave it at idle for twenty minutes. This means that any GNU/Linux distribution or version that uses GNOME 3.28 64 bit is affected including the older Ubuntu 18.04.x 64 bit LTS, Red Hat Fedora Workstation 28 64 bit and others that use it as well. There are separate but related fixes for GNOME 3.28 64 bit and Elementary OS 5 Juno(&lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;) 64 bit that are closely related that will solve this problem. I am going to share the solution that worked for me for Elementary OS 5 Juno(&lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;) 64 bit GNU/Linux in this post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix the problem with locking your screen that causes your &lt;a href=&quot;/questions/tagged/ethernet&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;ethernet&amp;#39;&quot; rel=&quot;tag&quot;&gt;ethernet&lt;/a&gt; or 802.11 &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; to disconnect after twenty minutes, follow these instructions step by step:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open up the terminal&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;sudo -s&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type in your root password&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;su -s /bin/bash lightdm&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;exit&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;exit&lt;/code&gt; again&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;exit&lt;/code&gt; once again to close the terminal&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To fix the problem with your desktop or notebook PC going to sleep or suspend mode after twenty minutes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open up the terminal&lt;/li&gt;&#xA;&lt;li&gt;Type in &lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Put in your root password&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;exit&lt;/code&gt; to close the terminal&lt;/li&gt;&#xA;&lt;li&gt;Restart your desktop or notebook PC for these changes to take into effect&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To verify that these two important fixes do work, I own three gaming PCs: 1. mid-2017 AVA Direct&#xA;2. mid-2017 ASUS ROG STRIX GL702ZC and&#xA;3. mid-2016 Acer Predator 17X (GX-791).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS 5 Juno(&lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;) 64 bit GNU/Linux is installed and updated on each gaming PC not to mention a healthy list of both free and open source and third-party closed source and proprietary software products. I decided to test these solutions by connecting to VPNSecure.me to different VPN gateway servers in the United States of America and I locked my screens and I waited for thirty minutes. After that period of time elapsed, I unlocked my screens and I double checked to verify that my gaming PCs had not gone into sleep or suspend mode which they did not and that my VPN encrypted tunnels were still connected which they still are connected at this time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure to restart your desktop or notebook PCs after committing these changes in the terminal so that the changes take into effect after each PC restarts itself.&lt;/p&gt;&#xA;" OwnerUserId="16013" LastEditorUserId="16827" LastEditDate="2019-01-29T15:56:51.200" LastActivityDate="2019-01-29T15:56:51.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16792" PostTypeId="2" ParentId="16772" CreationDate="2018-10-28T21:30:28.133" Score="3" Body="&lt;p&gt;These are the solutions that worked for me. I went into greater detail to explain myself and each solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did quite a bit of research so I wanted to share this information with this group if someone else may find it to be helpful or useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GNOME 3.28 64 bit has a software flaw in which your desktop or notebook PC will go into suspend or sleep mode after you either lock your screen or leave it at idle for twenty minutes. This means that any GNU/Linux distribution or version that uses GNOME 3.28 64 bit is affected including the older Ubuntu 18.04.x 64 bit LTS, Red Hat Fedora Workstation 28 64 bit and others that use it as well. There are separate but related fixes for GNOME 3.28 64 bit and Elementary OS 5 &quot;Juno&quot; 64 bit that are closely related that will solve this problem. I am going to share the solution that worked for me for Elementary OS 5 &quot;Juno&quot; 64 bit GNU/Linux in this post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix the problem with locking your screen that causes your Ethernet or 802.11 Wi-Fi to disconnect after twenty minutes, follow these instructions step by step:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1a. Open up the terminal&lt;br&gt;&#xA;1b. Type in &lt;code&gt;sudo -s&lt;/code&gt;&lt;br&gt;&#xA;1c. Type in your root password&lt;br&gt;&#xA;1d. Type in &lt;code&gt;su -s /bin/bash lightdm&lt;/code&gt;&lt;br&gt;&#xA;1e. Type in &lt;code&gt;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&lt;/code&gt;&lt;br&gt;&#xA;1f. Type in &lt;code&gt;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout&lt;/code&gt;&lt;br&gt;&#xA;1g. Type in &lt;code&gt;exit&lt;/code&gt;&lt;br&gt;&#xA;1h. Type in &lt;code&gt;exit&lt;/code&gt; again&lt;br&gt;&#xA;1i. Type in &lt;code&gt;exit&lt;/code&gt; once again to close the terminal  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix the problem with your desktop or notebook PC going to sleep or suspend mode after twenty minutes:  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2a. Open up the terminal&lt;br&gt;&#xA;2b. Type in &lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&lt;/code&gt;&lt;br&gt;&#xA;2c. Put in your root password&lt;br&gt;&#xA;2d. Type &lt;code&gt;exit&lt;/code&gt; to close the terminal&lt;br&gt;&#xA;2e. Restart your desktop or notebook PC for these changes to take into effect  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To verify that these two important fixes do work, I own three gaming PCs: 1. mid-2017 AVA Direct, 2. mid-2017 ASUS ROG STRIX GL702ZC and 3. mid-2016 Acer Predator 17X (GX-791). Elementary OS 5 &quot;Juno&quot; 64 bit GNU/Linux is installed and updated on each gaming PC not to mention a healthy list of both free and open source and third-party closed source and proprietary software products. I decided to test these solutions by connecting to VPNSecure.Me to different VPN gateway servers in the United States of America and I locked my screens and I waited for thirty minutes. After that period of time elapsed, I unlocked my screens and I double checked to verify that my gaming PCs had not gone into sleep or suspend mode which they did not and that my VPN encrypted tunnels were still connected which they still are connected at this time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure to restart your desktop or notebook PCs after committing these changes in the terminal so that the changes take into effect after each PC restarts itself.&lt;/p&gt;&#xA;" OwnerUserId="16013" LastEditorUserId="16827" LastEditDate="2019-08-26T16:17:23.187" LastActivityDate="2019-08-26T16:17:23.187" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16795" PostTypeId="1" AcceptedAnswerId="17603" CreationDate="2018-10-29T09:01:54.917" Score="0" ViewCount="428" Body="&lt;p&gt;I am just wondering if this is normal or something is weird. To be fair, even Ubuntu 18.10 wasn't the quickest boot around the block, at 40ish seconds. I have an SSD though, I thought it would have been quicker and I hear around booting time in the 10th of seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am booting via UEFI, thank you!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemd-analyze time&#xA;Startup finished in 10.867s (firmware) + 7.574s (loader) + 36.980s (kernel) + 1.222s (userspace) = 56.645s&#xA;graphical.target reached after 994ms in userspac&#xA;&#xA;systemd-analyze blame&#xA;           540ms apt-daily-upgrade.service&#xA;           338ms dev-mapper-elementary\x2d\x2dvg\x2droot.device&#xA;           275ms systemd-resolved.service&#xA;           240ms systemd-timesyncd.service&#xA;           215ms systemd-logind.service&#xA;           214ms apparmor.service&#xA;           207ms pantheon-parental-controls.service&#xA;           180ms plymouth-start.service&#xA;           179ms NetworkManager.service&#xA;           178ms plymouth-read-write.service&#xA;           139ms snapd.service&#xA;           137ms systemd-journal-flush.service&#xA;           109ms lvm2-pvscan@259:2.service&#xA;           107ms networkd-dispatcher.service&#xA;            94ms lightdm.service&#xA;            92ms plymouth-quit-wait.service&#xA;            77ms systemd-udev-trigger.service&#xA;            71ms udisks2.service&#xA;            70ms ModemManager.service&#xA;            69ms systemd-rfkill.service&#xA;            60ms accounts-daemon.service&#xA;            55ms keyboard-setup.service&#xA;            54ms upower.service&#xA;            40ms systemd-journald.service&#xA;            36ms speech-dispatcher.service&#xA;            33ms user@1000.service&#xA;            32ms lvm2-monitor.service&#xA;            29ms packagekit.service&#xA;            29ms gpu-manager.service&#xA;            29ms grub-common.service&#xA;            28ms pppd-dns.service&#xA;            25ms wpa_supplicant.service&#xA;            25ms systemd-fsck@dev-disk-by\x2duuid-FB53\x2d02B3.service&#xA;            24ms systemd-udevd.service&#xA;            21ms thermald.service&#xA;            21ms avahi-daemon.service&#xA;            17ms systemd-modules-load.service&#xA;            17ms bluetooth.service&#xA;            16ms colord.service&#xA;            15ms polkit.service&#xA;            12ms systemd-tmpfiles-setup.service&#xA;            11ms setvtrgb.service&#xA;            10ms systemd-tmpfiles-setup-dev.service&#xA;            10ms kerneloops.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2018-12-20T17:32:57.983" Title="Slow boot time on Dell XPS 9550 with Juno?" Tags="|boot|uefi|time|dell|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16797" PostTypeId="2" ParentId="16795" CreationDate="2018-10-29T10:05:59.913" Score="0" Body="&lt;p&gt;I think it is fairly normal. I have an XPS 15 9560 with an i7-7700HQ and systemd-analyze time quotes 44.335s but a big chunk of mine (like 6 seconds) is waiting for the NetworkManager to do its stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do dual boot and (exceedingly rarely) have actually booted into Windows. The time to get past the log in prompt seems no better (and then I start to panic because I have no idea what to do next...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have disabled services until I had a minimal set up to see if that made a difference and I got it down to around 25 seconds but then I couldn't do any real work. I would suggest that you disable as much as possible and see if it makes a difference for you.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-10-29T10:05:59.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16798" PostTypeId="2" ParentId="16787" CreationDate="2018-10-29T10:10:35.890" Score="2" Body="&lt;p&gt;I find that I don't want to open apps specifically from the command line, I just want to open a document and have whatever app is needed open it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xdg-open to the rescue!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So &lt;code&gt;xdg-open ~/mypdf.pdf &amp;amp;&lt;/code&gt; will automatically open my pdf document in Document Viewer. I need the &lt;code&gt;&amp;amp;&lt;/code&gt; to put the terminal command into the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Beware - you might end up with lots of GTK css warnings with some apps, most of which can be ignored.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2018-10-29T10:10:35.890" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16802" PostTypeId="1" CreationDate="2018-10-29T14:02:27.387" Score="0" ViewCount="103" Body="&lt;p&gt;After login the wallpaper is stretched out for about 1 second. When Plank and Wingpanel are loaded, the wallpaper is changed to the correct scale. This only occurs on a dual monitor setup. How to fix this?&lt;/p&gt;&#xA;" OwnerUserId="15997" LastActivityDate="2024-04-05T16:03:35.560" Title="Wallpaper stretched for short moment after login (dual monitor)" Tags="|release-juno|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16803" PostTypeId="1" CreationDate="2018-10-29T15:45:12.733" Score="1" ViewCount="4449" Body="&lt;p&gt;I am so long time (like 1 years) using elementary OS 0.4.1 Loki for this I love here a settings (ACTIVE SIDE! MINIMIZE ACTIVE WINDOW OPTION!!) I loving this, but elementary OS 5.0 Juno don't have this can I get this settings in 5.0 Juno else I am installing now 0.4.1 Loki?&lt;/p&gt;&#xA;" OwnerUserId="14645" LastEditorUserId="18070" LastEditDate="2019-05-08T10:04:29.827" LastActivityDate="2019-05-08T10:04:29.827" Title="How I get minimize window active side?" Tags="|system|release-juno|elementary-project|minimize|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16804" PostTypeId="1" CreationDate="2018-10-29T15:47:13.957" Score="0" ViewCount="262" Body="&lt;p&gt;Everytime I try to add a printer, I get this error: Unauthorized&#xA;Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How where do I enter my user name/password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help please.  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16142" LastActivityDate="2024-02-18T09:04:05.433" Title="cannot configure CUPS on elementary OS juno" Tags="|release-juno|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16806" PostTypeId="1" CreationDate="2018-10-29T17:01:00.677" Score="0" ViewCount="1651" Body="&lt;p&gt;I have just completed doing a clean installation of Juno. Despite having been connected to my home WiFi during the installation (from live USB), once fully installed, the OS could not connect to the Internet. I have tried connecting the laptop to the Internet via network/Ethernet cable without any success. No Wifi, no network connections whatsoever. I believe this is caused by the lack of (or incorrect) Ethernet and WiFi drivers. Since I was able to be online while booting from Live USB, I believe there are compatible drivers on the very USB that I could use. Could you please help me with locating and updating/installing the drivers? If I am not utterly mistaken, my network card is Ralink RT3290 802.11bgn Wi-Fi Adapter 5.0.57.0.&#xA;Thanks,&#xA;Davor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I am writing this from my Win10 OS.&lt;/p&gt;&#xA;" OwnerUserId="16144" LastActivityDate="2023-12-22T16:02:00.320" Title="Juno - No Internet Connection" Tags="|networking|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16807" PostTypeId="1" CreationDate="2018-10-29T17:15:01.810" Score="1" ViewCount="195" Body="&lt;p&gt;root@DXP051:/etc/sane.d/dll.d# sane-find-scanner&lt;/p&gt;&#xA;&#xA;&lt;p&gt;# sane-find-scanner will now attempt to detect your scanner. If the&#xA;  # result is different from what you expected, first make sure your&#xA;  # scanner is powered up and properly connected to your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;# No SCSI scanners found. If you expected something different, make sure that&#xA;  # you have loaded a kernel SCSI driver for your SCSI adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;??????????????????????????? (my wifi dongle) ?????????????????????&#xA;found USB scanner (vendor=0x04b8 [EPSON], product=0x012d [EPSON Scanner]) at libusb:001:002&#xA;  # Your USB scanner was (probably) detected. It may or may not be supported by&#xA;  # SANE. Try scanimage -L and read the backend's manpage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;# Not checking for parallel port scanners.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;# Most Scanners connected to the parallel port or other proprietary ports&#xA;  # can't be detected by this program.  &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;root@DXP051:/etc/sane.d/dll.d# scanimage -L&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No scanners were identified. If you were expecting something different,&#xA;check that the scanner is plugged in, turned on and detected by the&#xA;sane-find-scanner tool (if appropriate). Please read the documentation&#xA;which came with this software (README, FAQ, manpages).&#xA;root@DXP051:/etc/sane.d/dll.d# &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There is a deb file from Epson for this scanner, but oddly it shows as a directory rather than a file, so I don't understand how to install it. Running install.sh is successful, but doesn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NKYaF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NKYaF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7330" LastEditorUserId="7330" LastEditDate="2018-10-29T18:30:54.330" LastActivityDate="2018-10-29T18:30:54.330" Title="Scanner seen by sane-find-scanner but not scanimage" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16808" PostTypeId="1" CreationDate="2018-10-29T17:58:53.010" Score="0" ViewCount="317" Body="&lt;p&gt;I get a Dell 15&quot; 9570 and I try to install Juno on it but the touchpad doesn't work on liveCD so I install still (with an usb mouse) to try to solve but nothing work.. .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you know more about this issue ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I try lot of stuff e.g : &lt;a href=&quot;http://pappanyn.me/blog/2017/05/03/ubuntu-and-the-dell-xps-9560-touchpad/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://pappanyn.me/blog/2017/05/03/ubuntu-and-the-dell-xps-9560-touchpad/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/@peterpang_84917/personal-experience-of-installing-ubuntu-18-04-lts-on-xps-15-9570-3e53b6cfeefe&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@peterpang_84917/personal-experience-of-installing-ubuntu-18-04-lts-on-xps-15-9570-3e53b6cfeefe&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help ! &lt;/p&gt;&#xA;" OwnerUserId="16145" LastActivityDate="2024-04-03T01:08:35.997" Title="Dell XPS 15 9570 not touchpad" Tags="|touchpad|release-juno|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16812" PostTypeId="1" CreationDate="2018-10-29T21:04:19.627" Score="1" ViewCount="6895" Body="&lt;p&gt;I've got elementary OS 0.4.1 Loki. I've been trying to join a webinar  through &lt;a href=&quot;https://zoom.us/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://zoom.us/&lt;/a&gt; and it didn't work. I tried to install it in my computer but I don't know how to do it.&#xA;I downloaded a .deb file for Ubuntu, if I doubleclick on it the console opens but nothing happens.&#xA;Has anyone used zoom in elementary OS? Did it work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="16148" LastActivityDate="2020-06-21T03:22:12.503" Title="Zoom (Meetings &amp; chat)" Tags="|software-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16815" PostTypeId="2" ParentId="16806" CreationDate="2018-10-30T02:21:15.620" Score="0" Body="&lt;p&gt;you need to install driver for it. (chose ubuntu 18.04 bionic when download, eOS Juno is based on ubuntu 18.04)&#xA;this may help: &lt;a href=&quot;https://askubuntu.com/questions/760838/how-do-i-get-an-rt3290-wireless-card-to-work&quot;&gt;get rt3290 wireless work&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-10-30T02:21:15.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16816" PostTypeId="1" CreationDate="2018-10-30T03:29:02.883" Score="0" ViewCount="93" Body="&lt;p&gt;I've been running Kubuntu Linux for some time(years).  I check www.DistroWatch.com occasionally to see if any super new distro's are released.  I see that Elementary OS Linux version 5 was recently released and it is now ranked #3 on DistroWatch site.  I decided then to buy Elementary OS 5 and installed it to VirtualBox VM.  Everything looks super great but I have a couple of questions below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(1) What is the life expectancy of current Elementary OS 5 ?&lt;br&gt;&#xA;(it's based on Ubuntu 18.04 LTS, so would 2 years be a safe time?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(2) I need an indicator in (wing)panel that shows:&lt;br&gt;&#xA;- CPU use % graph&lt;br&gt;&#xA;- RAM use % graph&lt;br&gt;&#xA;- Network use graph&lt;br&gt;&#xA;- BONUS: CPU temperature display&lt;br&gt;&#xA;&lt;strong&gt;SOLVED:&lt;/strong&gt; &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/40/how-can-i-show-performance-graphs-in-wingpanel&quot;&gt;How can I show performance graphs in Wingpanel?&lt;/a&gt;&lt;br&gt;&#xA;(ISSUE: Adding PPA not supported for security reasons?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(3) What is the story behind not allowing folders and/or files on the desktop?&lt;br&gt;&#xA;(find it a little strange and awkward to be honest - some option to allow?)  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(4) If something is made for Ubuntu 18.04 LTS is it going to work with Elementary OS?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Those are my initial questions just based on 1 hour of use in a VM.  If someone can answer the above 4 questions then I would probably install it...  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jesse&lt;/p&gt;&#xA;" OwnerUserId="16154" LastEditorUserId="16154" LastEditDate="2018-10-30T19:11:05.737" LastActivityDate="2024-01-08T00:05:40.617" Title="VM Installed-Love What I see, But Have Some Questions Before Native Install" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16817" PostTypeId="1" AcceptedAnswerId="16837" CreationDate="2018-10-30T05:43:10.767" Score="1" ViewCount="2914" Body="&lt;p&gt;I've installed the latest version of ElementaryOS (as of a few days ago) and am looking for a way to prevent it from falling asleep or suspending.  In &lt;code&gt;System Settings&lt;/code&gt;-&gt;&lt;code&gt;Power&lt;/code&gt; I've set &quot;Suspend when inactive for:&quot; to &lt;em&gt;Never&lt;/em&gt;.  Anything else I need to set?&lt;/p&gt;&#xA;" OwnerUserId="16063" LastActivityDate="2019-04-29T16:02:15.417" Title="How to prevent computer from sleeping or suspending" Tags="|suspend|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16818" PostTypeId="2" ParentId="16817" CreationDate="2018-10-30T06:21:33.727" Score="0" Body="&lt;p&gt;did you set &quot;Plugged In&quot; OR &quot;On Battery&quot; ? they are different.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-10-30T06:21:33.727" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16819" PostTypeId="2" ParentId="16812" CreationDate="2018-10-30T06:41:16.760" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I tried to install it in my computer but I don't know how to do it.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;1) Open a terminal and change to your Downloads directory&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd Downloads/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2) Install the Zoom .deb package&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i zoom_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;3) If you get errors like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: error processing package zoom (--install):&#xA; dependency problems - leaving unconfigured&#xA;Errors were encountered while processing:&#xA; zoom&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then type the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you should see the Zoom application under Applications --&gt; Internet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've never used Zoom before, but the package installed just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tfAKc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tfAKc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-10-30T07:10:14.933" LastActivityDate="2018-10-30T07:10:14.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16822" PostTypeId="2" ParentId="16808" CreationDate="2018-10-30T11:41:41.740" Score="0" Body="&lt;p&gt;I have an XPS 9550 and everything is fine. I would suggest to update to the latest BIOS, 1.9.0 from the Dell website and see if it works.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2018-10-30T11:41:41.740" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16825" PostTypeId="1" CreationDate="2018-10-30T14:02:00.460" Score="0" ViewCount="1204" Body="&lt;p&gt;First and foremost thanks for the awesome work that has been done with elementary os - it truly is a work of art and I've donated to the project to show my support.&#xA;I was able to successfully install juno on my chromebook, a samsung chromebook pro. It has an intel M3 processor and with its HIDPI display elementary looks amazing. The only issue I have is when I stream movies via plex or netflix the CPU usage in chrome or firefox goes through the roof. It jumps up to somewhere around 120-130% and the laptop gets physically hot. I've tried different kernels (installed via ukuu) from 4.16 all the way up to 4.19 and nothing seems to have helped. Any tips or other things I could try? I'd really love to get elementary dialed in on this machine. Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Thanks for the reply! Unfortunately even with this flag set I am still seeing about 130-180% cpu usage during video playback. Here is a copy of what my chrome://gpu report looks like:&#xA;&lt;code&gt;&#xA;Graphics Feature Status&#xA;Canvas: Hardware accelerated&#xA;Flash: Hardware accelerated&#xA;Flash Stage3D: Hardware accelerated&#xA;Flash Stage3D Baseline profile: Hardware accelerated&#xA;Compositing: Hardware accelerated&#xA;Multiple Raster Threads: Enabled&#xA;Native GpuMemoryBuffers: Software only. Hardware acceleration disabled&#xA;Out-of-process Rasterization: Disabled&#xA;Hardware Protected Video Decode: Hardware accelerated&#xA;Rasterization: Software only. Hardware acceleration disabled&#xA;Skia Deferred Display List: Disabled&#xA;Skia Renderer: Disabled&#xA;Surface Synchronization: Enabled&#xA;Video Decode: Hardware accelerated&#xA;Viz Service Display Compositor: Disabled&#xA;WebGL: Hardware accelerated&#xA;WebGL2: Hardware accelerated&#xA;Driver Bug Workarounds&#xA;adjust_src_dst_region_for_blitframebuffer&#xA;clear_uniforms_before_first_program_use&#xA;count_all_in_varyings_packing&#xA;decode_encode_srgb_for_generatemipmap&#xA;disable_framebuffer_cmaa&#xA;disable_post_sub_buffers_for_onscreen_surfaces&#xA;msaa_is_slow&#xA;scalarize_vec_and_mat_constructor_args&#xA;disabled_extension_GL_ARB_timer_query&#xA;disabled_extension_GL_EXT_timer_query&#xA;disabled_extension_GL_KHR_blend_equation_advanced&#xA;disabled_extension_GL_KHR_blend_equation_advanced_coherent&#xA;Problems Detected&#xA;Clear uniforms before first program use on all platforms: 124764, 349137&#xA;Applied Workarounds: clear_uniforms_before_first_program_use&#xA;Mesa drivers in Linux handle varyings without static use incorrectly: 333885&#xA;Applied Workarounds: count_all_in_varyings_packing&#xA;Disable partial swaps on Mesa drivers (detected with GL_RENDERER): 339493&#xA;Applied Workarounds: disable_post_sub_buffers_for_onscreen_surfaces&#xA;Always rewrite vec/mat constructors to be consistent: 398694&#xA;Applied Workarounds: scalarize_vec_and_mat_constructor_args&#xA;On Intel GPUs MSAA performance is not acceptable for GPU rasterization: 527565&#xA;Applied Workarounds: msaa_is_slow&#xA;Timer queries crash on Intel GPUs on Linux: 540543, 576991&#xA;Applied Workarounds: disable(GL_ARB_timer_query), disable(GL_EXT_timer_query)&#xA;Use GL_INTEL_framebuffer_CMAA on ChromeOS: 535198&#xA;Applied Workarounds: disable_framebuffer_cmaa&#xA;Disable partial swaps on Mesa drivers (detected with GL_VERSION): 339493&#xA;Applied Workarounds: disable_post_sub_buffers_for_onscreen_surfaces&#xA;Decode and encode before generateMipmap for srgb format textures on os except macosx: 634519&#xA;Applied Workarounds: decode_encode_srgb_for_generatemipmap&#xA;adjust src/dst region if blitting pixels outside read framebuffer on Linux Intel: 664740&#xA;Applied Workarounds: adjust_src_dst_region_for_blitframebuffer&#xA;Disable KHR_blend_equation_advanced until cc shaders are updated: 661715&#xA;Applied Workarounds: disable(GL_KHR_blend_equation_advanced), disable(GL_KHR_blend_equation_advanced_coherent)&#xA;Native GpuMemoryBuffers have been disabled, either via about:flags or command line.&#xA;Disabled Features: native_gpu_memory_buffers&#xA;Viz service display compositor is not enabled by default.&#xA;Disabled Features: viz_display_compositor&#xA;Skia renderer is not used by default.&#xA;Disabled Features: skia_renderer&#xA;Skia deferred display list is not used by default.&#xA;Disabled Features: skia_deferred_display_list&#xA;Version Information&#xA;Data exported   2018-11-07T15:28:46.500Z&#xA;Chrome version  Chrome/70.0.3538.77&#xA;Operating system    Linux 4.15.0-38-generic&#xA;Software rendering list URL https://chromium.googlesource.com/chromium/src/+/0f6ce0b0cd63a12cb4eccea3637b1bc9a29148d9/gpu/config/software_rendering_list.json&#xA;Driver bug list URL https://chromium.googlesource.com/chromium/src/+/0f6ce0b0cd63a12cb4eccea3637b1bc9a29148d9/gpu/config/gpu_driver_bug_list.json&#xA;ANGLE commit id 05c729f336ef&#xA;2D graphics backend Skia/70 193565807f7fd2a2c14e21b44c545cc03ebe134f-&#xA;Command Line    /usr/bin/google-chrome-stable --flag-switches-begin --ignore-gpu-blacklist --flag-switches-end&#xA;Driver Information&#xA;Initialization time 47&#xA;In-process GPU  false&#xA;Passthrough Command Decoder false&#xA;Sandboxed   true&#xA;GPU0    VENDOR = 0x8086 [Intel Open Source Technology Center], DEVICE= 0x191e [Mesa DRI Intel(R) HD Graphics 515 (Skylake GT2) ] *ACTIVE*&#xA;Optimus false&#xA;AMD switchable  false&#xA;Driver vendor   Mesa&#xA;Driver version  18.0.5&#xA;Driver date &#xA;GPU CUDA compute capability major version   0&#xA;Pixel shader version    1.30&#xA;Vertex shader version   1.30&#xA;Max. MSAA samples   16&#xA;Machine model name&lt;br&gt;&#xA;Machine model version&lt;br&gt;&#xA;GL_VENDOR   Intel Open Source Technology Center&#xA;GL_RENDERER Mesa DRI Intel(R) HD Graphics 515 (Skylake GT2)&#xA;GL_VERSION  3.0 Mesa 18.0.5&#xA;GL_EXTENSIONS   GL_3DFX_texture_compression_FXT1 GL_AMD_conservative_depth GL_AMD_draw_buffers_blend GL_AMD_seamless_cubemap_per_texture GL_AMD_shader_stencil_export GL_AMD_shader_trinary_minmax GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5 GL_APPLE_object_purgeable GL_APPLE_packed_pixels GL_ARB_ES2_compatibility GL_ARB_ES3_compatibility GL_ARB_arrays_of_arrays GL_ARB_blend_func_extended GL_ARB_buffer_storage GL_ARB_clear_buffer_object GL_ARB_clear_texture GL_ARB_clip_control GL_ARB_color_buffer_float GL_ARB_compressed_texture_pixel_storage GL_ARB_compute_shader GL_ARB_conditional_render_inverted GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_copy_image GL_ARB_cull_distance GL_ARB_debug_output GL_ARB_depth_buffer_float GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_derivative_control GL_ARB_draw_buffers GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_draw_instanced GL_ARB_explicit_attrib_location GL_ARB_explicit_uniform_location GL_ARB_fragment_coord_conventions GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_no_attachments GL_ARB_framebuffer_object GL_ARB_framebuffer_sRGB GL_ARB_get_program_binary GL_ARB_get_texture_sub_image GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_instanced_arrays GL_ARB_internalformat_query GL_ARB_internalformat_query2 GL_ARB_invalidate_subdata GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multi_bind GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pipeline_statistics_query GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_polygon_offset_clamp GL_ARB_program_interface_query GL_ARB_provoking_vertex GL_ARB_query_buffer_object GL_ARB_robust_buffer_access_behavior GL_ARB_robustness GL_ARB_sample_shading GL_ARB_sampler_objects GL_ARB_seamless_cube_map GL_ARB_seamless_cubemap_per_texture GL_ARB_separate_shader_objects GL_ARB_shader_atomic_counter_ops GL_ARB_shader_atomic_counters GL_ARB_shader_ballot GL_ARB_shader_bit_encoding GL_ARB_shader_clock GL_ARB_shader_draw_parameters GL_ARB_shader_group_vote GL_ARB_shader_image_load_store GL_ARB_shader_image_size GL_ARB_shader_objects GL_ARB_shader_precision GL_ARB_shader_stencil_export GL_ARB_shader_storage_buffer_object GL_ARB_shader_texture_image_samples GL_ARB_shader_texture_lod GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_packing GL_ARB_shadow GL_ARB_stencil_texturing GL_ARB_sync GL_ARB_texture_barrier GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_compression_bptc GL_ARB_texture_compression_rgtc GL_ARB_texture_cube_map GL_ARB_texture_cube_map_array GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_filter_anisotropic GL_ARB_texture_float GL_ARB_texture_gather GL_ARB_texture_mirror_clamp_to_edge GL_ARB_texture_mirrored_repeat GL_ARB_texture_multisample GL_ARB_texture_non_power_of_two GL_ARB_texture_query_levels GL_ARB_texture_query_lod GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_rgb10_a2ui GL_ARB_texture_stencil8 GL_ARB_texture_storage GL_ARB_texture_storage_multisample GL_ARB_texture_swizzle GL_ARB_texture_view GL_ARB_timer_query GL_ARB_transform_feedback2 GL_ARB_transform_feedback3 GL_ARB_transform_feedback_instanced GL_ARB_transform_feedback_overflow_query GL_ARB_transpose_matrix GL_ARB_uniform_buffer_object GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_attrib_binding GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_vertex_type_10f_11f_11f_rev GL_ARB_vertex_type_2_10_10_10_rev GL_ARB_window_pos GL_ATI_blend_equation_separate GL_ATI_draw_buffers GL_ATI_separate_stencil GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_copy_texture GL_EXT_draw_buffers2 GL_EXT_draw_instanced GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_multisample_blit_scaled GL_EXT_framebuffer_object GL_EXT_framebuffer_sRGB GL_EXT_gpu_program_parameters GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_float GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_polygon_offset_clamp GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shader_integer_mix GL_EXT_shader_samples_identical GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_subtexture GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_array GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_integer GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_shared_exponent GL_EXT_texture_snorm GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_transform_feedback GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_IBM_multimode_draw_arrays GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_INGR_blend_func_separate GL_INTEL_performance_query GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent GL_KHR_context_flush_control GL_KHR_debug GL_KHR_no_error GL_KHR_robust_buffer_access_behavior GL_KHR_robustness GL_KHR_texture_compression_astc_ldr GL_KHR_texture_compression_astc_sliced_3d GL_MESA_pack_invert GL_MESA_shader_integer_functions GL_MESA_texture_signed_rgba GL_MESA_window_pos GL_NV_blend_square GL_NV_conditional_render GL_NV_depth_clamp GL_NV_light_max_exponent GL_NV_packed_depth_stencil GL_NV_primitive_restart GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_env_combine4 GL_NV_texture_rectangle GL_OES_EGL_image GL_OES_read_format GL_S3_s3tc GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SUN_multi_draw_arrays&#xA;Disabled Extensions GL_ARB_timer_query GL_EXT_timer_query GL_KHR_blend_equation_advanced GL_KHR_blend_equation_advanced_coherent&#xA;Disabled WebGL Extensions&lt;br&gt;&#xA;Window system binding vendor    SGI&#xA;Window system binding version   1.4&#xA;Window system binding extensions    GLX_ARB_create_context GLX_ARB_create_context_profile GLX_ARB_create_context_robustness GLX_ARB_fbconfig_float GLX_ARB_framebuffer_sRGB GLX_ARB_multisample GLX_EXT_create_context_es_profile GLX_EXT_create_context_es2_profile GLX_EXT_fbconfig_packed_float GLX_EXT_framebuffer_sRGB GLX_EXT_import_context GLX_EXT_libglvnd GLX_EXT_texture_from_pixmap GLX_EXT_visual_info GLX_EXT_visual_rating GLX_MESA_copy_sub_buffer GLX_OML_swap_method GLX_SGI_make_current_read GLX_SGI_swap_control GLX_SGIS_multisample GLX_SGIX_fbconfig GLX_SGIX_pbuffer GLX_SGIX_visual_select_group GLX_INTEL_swap_event&#xA;Window manager  Mutter(Gala)&#xA;XDG_CURRENT_DESKTOP Pantheon&#xA;GDMSESSION  pantheon&#xA;Compositing manager Yes&#xA;Direct rendering    Yes&#xA;Reset notification strategy 0x8261&#xA;GPU process crash count 0&#xA;System visual ID    33&#xA;RGBA visual ID  403&#xA;Compositor Information&#xA;Tile Update Mode    One-copy&#xA;Partial Raster  Enabled&#xA;GpuMemoryBuffers Status&#xA;ATC Software only&#xA;ATCIA   Software only&#xA;DXT1    Software only&#xA;DXT5    Software only&#xA;ETC1    Software only&#xA;R_8 Software only&#xA;R_16    Software only&#xA;RG_88   Software only&#xA;BGR_565 Software only&#xA;RGBA_4444   Software only&#xA;RGBX_8888   Software only&#xA;RGBA_8888   Software only&#xA;BGRX_8888   Software only&#xA;BGRX_1010102    Software only&#xA;RGBX_1010102    Software only&#xA;BGRA_8888   Software only&#xA;RGBA_F16    Software only&#xA;YVU_420 Software only&#xA;YUV_420_BIPLANAR    Software only&#xA;UYVY_422    Software only&#xA;Display(s) Information&#xA;Info    Display[21691195950291266] bounds=[0,0 1200x800], workarea=[0,30 1200x770], scale=2, external.&#xA;Color space information {primaries_d50_referred: [[0.6483, 0.3302], [0.3206, 0.5982], [0.1552, 0.0656]], transfer:0.0000*x + 0.0000 if x &amp;lt; 0.0000 else (1.0000*x + 0.0000)**2.2000 + 0.0000, matrix:RGB, range:FULL}&#xA;Bits per color component    8&#xA;Bits per pixel  24&#xA;Video Acceleration Information&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd definitely appreciate any further insight. :)&lt;/p&gt;&#xA;" OwnerUserId="16162" LastEditorUserId="8" LastEditDate="2018-12-04T21:42:08.133" LastActivityDate="2023-12-09T16:00:18.110" Title="High CPU Usage on Juno in Chrome during video playback" Tags="|release-juno|google-chrome|chromebook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16830" PostTypeId="1" CreationDate="2018-10-30T18:18:57.787" Score="0" ViewCount="499" Body="&lt;p&gt;Just moved to Elementary and installed Jetbrains IDE but my font looks very different compared to OSX.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the below instructions but trying to install it results in an error saying it can't be found. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I install it or get my fonts to look like they are on OSX?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:no1wantdthisname/ppa&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get upgrade&#xA;&#xA;sudo apt-get install fontconfig-infinality&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16095" LastActivityDate="2020-11-12T03:00:18.863" Title="Installing Infinality" Tags="|release-juno|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16831" PostTypeId="2" ParentId="16700" CreationDate="2018-10-30T19:10:39.543" Score="0" Body="&lt;p&gt;Have you tried installing media codecs?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ubuntu-restricted-extras&#xA;sudo apt install libavcodec-extra&#xA;sudo apt install libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Take a look at this link &lt;a href=&quot;https://www.ubuntupit.com/best-things-to-do-after-installing-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.ubuntupit.com/best-things-to-do-after-installing-elementary-os&lt;/a&gt; you may find interesting options.&lt;/p&gt;&#xA;" OwnerUserId="15093" LastActivityDate="2018-10-30T19:10:39.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16832" PostTypeId="2" ParentId="16174" CreationDate="2018-10-30T19:21:20.057" Score="1" Body="&lt;p&gt;If you have Freya, you'd have to have the 64-bit version to install Brave since there is no 32-bit version of Brave for Linux. If you do have 64-bit Freya, you can try the Ubuntu instructions here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have 32-bit Freya, like I do, you won't be able to install Brave.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/brave/browser-laptop/issues/2468&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/brave/browser-laptop/issues/2468&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-10-31T06:33:00.000" LastActivityDate="2018-10-31T06:33:00.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16833" PostTypeId="1" CreationDate="2018-10-30T22:03:46.250" Score="4" ViewCount="667" Body="&lt;p&gt;I'm using eclipse photon to program in java 8, and when I create a new class, package, I enter the settings, etc. It seems that these windows are inside a window, how can I solve this?&lt;a href=&quot;https://i.stack.imgur.com/NTJZ9.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NTJZ9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16167" LastActivityDate="2019-01-21T16:02:17.970" Title="how to fix bug in the windows of elementary os" Tags="|display|settings|applications|" AnswerCount="2" CommentCount="0" ClosedDate="2019-05-13T07:09:12.300" ContentLicense="CC BY-SA 4.0" />
  <row Id="16836" PostTypeId="2" ParentId="203" CreationDate="2018-10-31T02:38:00.267" Score="3" Body="&lt;p&gt;When I use that command it says:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No such schema &quot;com.canonical.indicator.datetime&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:  the correct setting is: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(under dconf Editor)&#xA;io.elementary.desktop.wingpanel.datetime -&gt; clock-show-seconds&lt;/p&gt;&#xA;" OwnerUserId="16170" LastEditorUserId="16170" LastEditDate="2018-10-31T02:59:36.290" LastActivityDate="2018-10-31T02:59:36.290" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16837" PostTypeId="2" ParentId="16817" CreationDate="2018-10-31T05:39:06.090" Score="2" Body="&lt;p&gt;Figured this out.  The settings in &lt;code&gt;System Settings&lt;/code&gt;-&gt;&lt;code&gt;Power&lt;/code&gt; don't seem to make any difference, at least on my particular BIOS or motherboard or whatever.  However, this command will fix the problem and prevent the machine from ever sleeping:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-sleep.target&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="16063" LastActivityDate="2018-10-31T05:39:06.090" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16841" PostTypeId="2" ParentId="16802" CreationDate="2018-10-31T12:12:19.417" Score="0" Body="&lt;p&gt;I noticed this happened to me when i change screen resolution. Login screen doesn't adapt to the current resolution, then after login it stretches wallpaper (and rest of the display) to adapt to the correct resolution. Are you using different resolutions that the one used by the login screen?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-31T12:12:19.417" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16844" PostTypeId="2" ParentId="16754" CreationDate="2018-10-31T15:34:30.643" Score="0" Body="&lt;p&gt;There is a known bug where this happens only after lock/suspend. Is this your case, or it behaves like this right after boot?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-31T15:34:30.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16845" PostTypeId="2" ParentId="16803" CreationDate="2018-10-31T15:37:52.913" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open settings and change that option in Tweaks menu.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-31T15:37:52.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16847" PostTypeId="1" CreationDate="2018-10-31T16:43:20.553" Score="0" ViewCount="63" Body="&lt;p&gt;I was really looking forward to juno, unfortunately this makes my system even more unstable than before with loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As soon as I click Epiphany, Pantheon will reset to the login screen, while I am able to log back in, there is no Dock, no top-bar no nothing... this does not happen with Firefox though, FF will just crash after a few minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also the additional drivers menu is not shown in settings, which was there in Loki. After manually installing software-properties, I can see the Nvidia 390 driver but no chipset driver (which was there in Loki).&lt;/p&gt;&#xA;" OwnerUserId="7982" LastActivityDate="2024-04-05T20:09:06.053" Title="system resets on certain apps" Tags="|release-juno|pantheon|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16849" PostTypeId="1" AcceptedAnswerId="16854" CreationDate="2018-10-31T16:56:29.057" Score="1" ViewCount="844" Body="&lt;p&gt;I've downloaded Cisco PacketTracer and ran it normally from terminal with a &lt;code&gt;./PacketTracer7&lt;/code&gt; command in packettracer's Bin folder. No problem there. The problem is, i can't add it to the launcher (with App-Editor) or pin it to plank. I need to run it exactly from that folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can install it and run it from the menu, but it messes the app window resolution.  Everything looks huge. So i need to launch it from that path.&#xA;Is there a way around it?&#xA;I tried &lt;code&gt;sh /home/user/packettracer/PacketTracer7&lt;/code&gt; in App-Editor, but that doesn't work either.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-10-31T17:15:58.340" LastActivityDate="2018-10-31T22:55:05.630" Title="Can't add shortcut to app launcher" Tags="|slingshot|resolution|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16850" PostTypeId="1" CreationDate="2018-10-31T17:36:31.623" Score="0" ViewCount="342" Body="&lt;p&gt;I used to have my main disk with Elementary have Windows 10 (which is on a separate SSD) as an option on GRUB on Loki. I have just updated to Juno, but now I can't seem to add Windows 10 to the boot options. Windows still boots if I select windows boot manger from the BIOS settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried using os-prober and update-grub, which is how I added them on Loki. &lt;/p&gt;&#xA;" OwnerUserId="16180" LastActivityDate="2024-01-06T13:03:30.373" Title="Can't add Windows 10 to GRUB after installing Juno" Tags="|release-juno|grub|microsoft-windows|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16851" PostTypeId="2" ParentId="16849" CreationDate="2018-10-31T19:47:59.230" Score="0" Body="&lt;p&gt;Pardon me for asking this in the answer section, but I don't have a high enough reputation to ask in the comment section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) What version of elementary are you using?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can get Packet Tracer to install and run just fine in Loki, but I have issues with running it in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Whether it's Loki or Juno, it looks like Packet Tracer's desktop file is incorrect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go to &lt;code&gt;/usr/share/applications&lt;/code&gt;, the &lt;strong&gt;pt7.desktop&lt;/strong&gt; file looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Exec=PacketTracer7&#xA;Icon=pt7&#xA;Type=Application&#xA;Terminal=false&#xA;Name=Packet Tracer 7.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I changed it to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Exec=packettracer&#xA;Icon=/opt/pt/art/app.ico&#xA;Type=Application&#xA;Terminal=true&#xA;Name=Packet Tracer 7.2&#xA;Categories=Development;IDE;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then it puts an icon under Programming in the Application menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Loki, I can alternate-click and select &quot;Keep in Dock&quot; to put it on the Plank. I can also run it just fine - even without any resolution problems. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, in Juno, I can't get it to run from the menu or from the terminal. If I type &lt;code&gt;packettracer&lt;/code&gt; in the terminal, It says &lt;code&gt;Starting Packet Tracer 7.2&lt;/code&gt; but it never runs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: Packet Tracer does appear to have another .desktop file than the one that ends up in &lt;code&gt;/usr/share/applications&lt;/code&gt;.  It's in /opt/pt/bin and it's called &lt;strong&gt;Cisco-PacketTracer.desktop&lt;/strong&gt;. It's contents are:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Type=Application&#xA;&#xA;Exec=packettracer %F&#xA;Icon=/opt/pt/art/app.png&#xA;&#xA;Name=Cisco Packet Tracer&#xA;Categories=Application;Network;&#xA;&#xA;MimeType=application/x-pkt;application/x-pka;application/x-pkz;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But still can't get it working in Juno - even with your method of &lt;strong&gt;./PacketTracer7&lt;/strong&gt;. I get the following message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;error while loading shared libraries: libpng12.so.0: cannot open&#xA;  shared object file: No such file or directory&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-10-31T20:17:02.830" LastActivityDate="2018-10-31T20:17:02.830" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16854" PostTypeId="2" ParentId="16849" CreationDate="2018-10-31T22:55:05.630" Score="0" Body="&lt;p&gt;Solved it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a desktop file in &lt;code&gt;~.local/share/applications/&lt;/code&gt; with the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Type=Application&#xA;&#xA;Exec=/home/USER/PacketTracer/bin/PacketTracer7&#xA;Icon=/home/USER/PacketTracer/art/pkz.png&#xA;Path=/home/USER/PacketTracer/bin/&#xA;Name=Cisco Packet Tracer&#xA;Categories=Application;Network;&#xA;&#xA;MimeType=application/x-pkt;application/x-pka;application/x-pkz;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The shortcut immediately appeared in app launcher.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-10-31T22:55:05.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16855" PostTypeId="2" ParentId="16804" CreationDate="2018-11-01T02:11:23.037" Score="0" Body="&lt;p&gt;Just use the cups! do not open the interface. By doing so you will solve this!&lt;/p&gt;&#xA;" OwnerUserId="11944" LastActivityDate="2018-11-01T02:11:23.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16857" PostTypeId="1" AcceptedAnswerId="16859" CreationDate="2018-11-01T12:16:16.600" Score="0" ViewCount="637" Body="&lt;p&gt;I use &lt;code&gt;irsii&lt;/code&gt; in terminal, and I would like to use Alt-1, ..., Alt-9 to switch between irssi windows, but these keybindings are already taken from terminal to switch between terminal tabs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/981/list-of-keyboard-shortcuts-for-terminal/983#983&quot;&gt;this useful answer&lt;/a&gt;, and I explored the settings in &lt;code&gt;dconf-editor&lt;/code&gt;, but I didn't find anything useful.&lt;/p&gt;&#xA;" OwnerUserId="15725" LastActivityDate="2018-12-16T23:08:53.470" Title="How to change terminal shortcuts" Tags="|keyboard-shortcuts|pantheon-terminal|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16858" PostTypeId="2" ParentId="16857" CreationDate="2018-11-01T12:54:00.537" Score="1" Body="&lt;p&gt;Unfortunately the terminal shortcuts are hardcoded. I'm not sure if there's plans to make them configurable. To solve your problem, I see two possible solutions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Modify the source code and compile locally. I see some mention of alt keys here &lt;a href=&quot;https://github.com/elementary/terminal/blob/master/src/PantheonTerminalWindow.vala#L410&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal/blob/master/src/PantheonTerminalWindow.vala#L410&lt;/a&gt;. It might be as simple as removing the cases &lt;code&gt;case Gdk.Key.@1:&lt;/code&gt; to &lt;code&gt;case Gdk.Key.@9:&lt;/code&gt; from the switch statement. There's also instructions on how to compile here &lt;a href=&quot;https://github.com/elementary/terminal/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal/&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Use a different terminal emulator like &lt;code&gt;xterm&lt;/code&gt; or &lt;code&gt;gnome-terminal&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15933" LastActivityDate="2018-11-01T12:54:00.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16859" PostTypeId="2" ParentId="16857" CreationDate="2018-11-01T13:07:21.583" Score="2" Body="&lt;p&gt;Thanks to the answer of @&quot;Alex Mitchell&quot;, I realized that the &lt;code&gt;alt_changes_tab&lt;/code&gt; setting is responsible for the behavior I would like to modify, and I realized that this setting can be accessed and changed through dconf-editor, so I eventually solved my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&#xA;I mean, changed in the sense that the Alt+num keybindings can be completely disabled, not configured, but this is enough for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit2&lt;/strong&gt;&#xA;To answer to the comment: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;install the package &lt;code&gt;dconf-editor&lt;/code&gt;, I did it from command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;launch the application, it is called &lt;em&gt;Editor dconf&lt;/em&gt;, &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;search for the string &lt;em&gt;terminal&lt;/em&gt;, clicking on the search tool icon on the upper right part of the window&lt;/li&gt;&#xA;&lt;li&gt;click on &lt;em&gt;/io/elementary/terminal&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;click on &lt;em&gt;settings&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;toggle the switch on the right of the setting on &lt;em&gt;alt-changes-tab&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="15725" LastEditorUserId="15725" LastEditDate="2018-12-10T14:37:21.673" LastActivityDate="2018-12-10T14:37:21.673" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16860" PostTypeId="2" ParentId="16456" CreationDate="2018-11-01T14:31:09.080" Score="2" Body="&lt;p&gt;You can generate a one-time app password within your Google account settings and keep using 2fa for all other accesses.&#xA;See: &lt;a href=&quot;https://myaccount.google.com/apppasswords&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://myaccount.google.com/apppasswords&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16190" LastActivityDate="2018-11-01T14:31:09.080" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16861" PostTypeId="1" CreationDate="2018-11-01T16:44:13.500" Score="0" ViewCount="5080" Body="&lt;p&gt;I'm very excited about getting Juno installed, but unfortunately, after creating a bootable USB-drive with unetbootin and booting the drive, I stare at nothing but a black screen. It doesn't matter which option I choose, it always has the same result. I tried redownloading the .iso-file. Different USB-drives and different USB-slots on the laptop, but still it won't boot. Can anyone help me? I have a Korora Penguin laptop from ThinkPenguin, which never had any problems booting any Linux system before. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="151" LastActivityDate="2020-03-13T15:23:36.817" Title="Bootable USB won't boot" Tags="|system-installation|release-juno|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16862" PostTypeId="2" ParentId="16861" CreationDate="2018-11-01T17:06:24.823" Score="1" Body="&lt;p&gt;I flashed my usb with &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;etcher&lt;/a&gt; and everything went smooth. Give it a try.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-01T17:06:24.823" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16863" PostTypeId="2" ParentId="16861" CreationDate="2018-11-01T17:16:49.317" Score="0" Body="&lt;p&gt;you don't have windows? you should use rufus and take mode UEFI on rufus or you can search elementary market Image Writer I tried and this is working good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And you don't have windows then you can install wine and try run rufus.&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-11-01T17:16:49.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16864" PostTypeId="1" CreationDate="2018-11-01T18:35:46.360" Score="1" ViewCount="329" Body="&lt;p&gt;A little bit of info for my setups, I have tried this with: live USB, bootable USB, hard drive and I was still getting the same issue across all 3. And this workaround has worked with all as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was trying to get my employer (really small company, I am usually the only one in the building most of the time) to use Elementary OS for the one computer in the office. As I was showing it off, I couldn't get the printer to set up right. I tried everything, even downloading the drivers from the manufacturers website and nothing worked. I eventually ended up installing &quot;system-config-printer&quot; and it worked like a charm. Ran it, it saw the two printers I was trying to add, I said add on one and add on another and they both work just fine without having to go download the drivers, it did that for me (well at least for the two printers I am using). The only thing that I see is that if I change anything dealing with the printer in the printer app that comes with EOS, it will ruin everything that I did and make the printer inoperable. So if you are having the same issue, an easy work around is to install that and off you go. If you do need to change any information about the printer (seriously even something as little as location) don't do it through the program that comes with EOS it will break things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install it by running in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&lt;strong&gt;sudo apt install system-config-printer&lt;/strong&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then it won't show in the applications menu, so you are going to have to run it through the terminal just using.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&lt;strong&gt;system-config-printer&lt;/strong&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't use sudo to run it. I did that once and it only added the printer to the root user, not the user I was on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if this does not belong here, I apologize, this is my first time commenting on anything like this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if anyone knows a better way to make these things work, let me know. But for now, this works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that any of this information helps anyone having the same issues as me. And are having a hard time getting the drivers from the manufacturers website to work.&lt;/p&gt;&#xA;" OwnerUserId="16192" LastActivityDate="2024-01-07T20:00:30.067" Title="Printer Issues and possible fix/workaround" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16865" PostTypeId="2" ParentId="2850" CreationDate="2018-11-01T19:12:33.217" Score="0" Body="&lt;p&gt;You can use Rufus or Etcher for create a new bootable usb you can go Fedora and install Etcher and create a new bootable usb.&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-11-01T19:12:33.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16866" PostTypeId="2" ParentId="16864" CreationDate="2018-11-01T19:20:38.103" Score="0" Body="&lt;p&gt;You should try to install your printer driver? I lived this problem with Canon Pixma and installed my driver and working perfectly.&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-11-01T19:20:38.103" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16868" PostTypeId="2" ParentId="16847" CreationDate="2018-11-01T19:36:26.597" Score="0" Body="&lt;p&gt;Same problem, Yesterday I installed Juno, and quickly returned 0.4.1 Loki, I tried beta version Juno stable version like beta version nothing different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ElementaryOS looking perfect but should be more update more stabilty.&#xA;But again I love Elementary and 0.4.1 Loki is perfectly working. :)&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-11-01T19:36:26.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16869" PostTypeId="2" ParentId="9651" CreationDate="2018-11-01T19:47:47.007" Score="0" Body="&lt;p&gt;You can use Rufus for create bootable disk (USB/DVD/CD) Try Rufus this is should be work.&lt;/p&gt;&#xA;" OwnerUserId="14645" LastActivityDate="2018-11-01T19:47:47.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16870" PostTypeId="1" AcceptedAnswerId="16871" CreationDate="2018-11-01T20:13:02.507" Score="0" ViewCount="195" Body="&lt;p&gt;When I try to unlock, I'm unable to focus the password input without clicking the mouse, is there a way around this so I can focus the input without a mouse? There doesn't appear to be any setting for this in system settings.&lt;/p&gt;&#xA;" OwnerUserId="16194" LastActivityDate="2018-11-02T02:45:03.503" Title="How to unlock without the mouse?" Tags="|greeter|keyboard-shortcuts|keyboard|lock|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:02:46.220" ContentLicense="CC BY-SA 4.0" />
  <row Id="16871" PostTypeId="2" ParentId="16870" CreationDate="2018-11-02T02:45:03.503" Score="0" Body="&lt;p&gt;it's a confirmed bug : &lt;a href=&quot;https://github.com/elementary/greeter/issues/144&quot; rel=&quot;nofollow noreferrer&quot;&gt;Password input not in focus #144&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-02T02:45:03.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16872" PostTypeId="2" ParentId="16850" CreationDate="2018-11-02T03:10:38.870" Score="0" Body="&lt;p&gt;try boot repair from this ppa: &lt;a href=&quot;https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-Repair&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-02T03:10:38.870" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16873" PostTypeId="2" ParentId="16816" CreationDate="2018-11-02T10:08:14.833" Score="0" Body="&lt;p&gt;(1) elementary OS is build on Ubuntu LTS versions, there will only be a major update if there is a new LTS version of Ubuntu. So as long as Canonical keeps their update cycle two years should be a good estimation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(2) To add a custom PPA in elementary OS, you need to install the package &lt;code&gt;software-properties-common&lt;/code&gt;, probably not installed by default for the stated &lt;em&gt;security&lt;/em&gt; reasons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(3) It's just a way elementary handles things, maybe to make a more sleek appearence. This &lt;a href=&quot;https://elementaryforums.com/index.php?threads/enable-desktop-icons-and-right-click-in-elementaryos-freya.198/&quot; rel=&quot;nofollow noreferrer&quot;&gt;post&lt;/a&gt; is a bit older, but might help you achive what you want.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(4) Generally i would say, it depends. Mostly probably yes, but there are maybe some packages not compatible with &lt;code&gt;Pantheon&lt;/code&gt; or &lt;code&gt;Gtk&lt;/code&gt;, so you would have to add the dependencies by yourself. &lt;/p&gt;&#xA;" OwnerUserId="15563" LastActivityDate="2018-11-02T10:08:14.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16874" PostTypeId="2" ParentId="16861" CreationDate="2018-11-02T10:15:20.943" Score="1" Body="&lt;p&gt;There is a similar post with an identical problem. It was solved by turning of the &lt;code&gt;Secure Boot&lt;/code&gt; option in the BIOS. As I know &lt;code&gt;Secure Boot&lt;/code&gt; checks the boot drive for a signature to make sure nothing suspicious is being booted. By turning it off you skip that.&lt;/p&gt;&#xA;" OwnerUserId="15563" LastActivityDate="2018-11-02T10:15:20.943" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16876" PostTypeId="2" ParentId="16830" CreationDate="2018-11-02T10:28:37.533" Score="0" Body="&lt;p&gt;To install a custom PPA in elementary OS, you need to install &lt;code&gt;software-properties-common&lt;/code&gt;. Did you do that already? If not install &lt;code&gt;software-properties-common&lt;/code&gt; and run the commands you named again.&lt;/p&gt;&#xA;" OwnerUserId="15563" LastActivityDate="2018-11-02T10:28:37.533" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16877" PostTypeId="1" CreationDate="2018-11-02T10:47:33.043" Score="0" ViewCount="547" Body="&lt;p&gt;I installed Juno yesterday.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;VPN Connections&lt;/strong&gt; in Network setting do not affect on the browsers and in Chrome proxy settings is written:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;&quot;When running Google Chrome under a supported desktop environment, the system proxy settings will be used. However, either your system is not supported or there was a problem launching your system configuration.&#xA;But you can still configure via the command line. Please see man google-chrome-stable for more information on flags and environment variables.&quot;&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, but they affect the whole system through the terminal.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Software icons&lt;/strong&gt; are not visible in the system tray.&lt;/p&gt;&#xA;" OwnerUserId="16199" LastEditorUserId="14940" LastEditDate="2018-12-05T23:43:44.160" LastActivityDate="2023-12-11T09:05:05.657" Title="VPN Connections &amp; Tray Icons in Juno" Tags="|wingpanel|release-juno|vpn|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16879" PostTypeId="1" CreationDate="2018-11-02T17:45:37.160" Score="1" ViewCount="1518" Body="&lt;p&gt;When I'm trying to quit messaging (and some other) apps like Telegram or Discord, I'm unable to do so. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If trying to quit Telegram, upon click on close button in the window corner, it just hides the window, and keeps the app in dock. Right clicking the app and clicking Close hides app from the dock, but app is still open. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similar thing happens with discord, except clicking on close button in window corner hides it from dock, but app remains open, and I receive notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;JetBrains toolbox also behaves like discord.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember seeing app icons in top-right corner (more like between time and top-right corner) of the screen, but after a bit of googling, this feature was cut from the OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I don't really object to this feature going away, I still need a way to close the apps and I don't know any other way (besides killing the process which is a bad way in my opinion).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, either, how do I close an app, or how do I get it back?&lt;/p&gt;&#xA;" OwnerUserId="16201" LastActivityDate="2019-01-06T12:15:18.900" Title="How do I fully close apps?" Tags="|plank|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16880" PostTypeId="2" ParentId="16879" CreationDate="2018-11-02T19:09:02.857" Score="1" Body="&lt;p&gt;You can use &lt;code&gt;killall &amp;lt;process&amp;gt;&lt;/code&gt; in the terminal to completly stop the background processes of the applications. &lt;/p&gt;&#xA;" OwnerUserId="15563" LastActivityDate="2018-11-02T19:09:02.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16884" PostTypeId="1" CreationDate="2018-11-03T02:27:49.390" Score="0" ViewCount="1352" Body="&lt;p&gt;On Juno the default Mega &lt;code&gt;deb&lt;/code&gt; package is not installing because of missing dependencies which using &lt;code&gt;sudo apt install -f&lt;/code&gt; does not resolve. In face of better solution I came here to see what can be done, the last elementary available version of Mega is for &lt;a href=&quot;https://mega.nz/sync&quot; rel=&quot;nofollow noreferrer&quot;&gt;Loki&lt;/a&gt; (which was what I was using and it worked perfectly).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to install the Loki version it gives the following dependency chain:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: dependency problems prevent configuration of megasync:&#xA; megasync depends on libcrypto++9v5; however:&#xA;  Package libcrypto++9v5 is not installed.&#xA; megasync depends on libqt4-dbus (&amp;gt;= 4:4.5.3); however:&#xA;  Package libqt4-dbus is not installed.&#xA; megasync depends on libqt4-network (&amp;gt;= 4:4.7.0~beta1); however:&#xA;  Package libqt4-network is not installed.&#xA; megasync depends on libqt4-svg (&amp;gt;= 4:4.5.3); however:&#xA;  Package libqt4-svg is not installed.&#xA; megasync depends on libqtcore4 (&amp;gt;= 4:4.8.0); however:&#xA;  Package libqtcore4 is not installed.&#xA; megasync depends on libqtgui4 (&amp;gt;= 4:4.8.0); however:&#xA;  Package libqtgui4 is not installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The first dependency I saw that other people had a problem as well, and the others should be fixed with a simple &lt;code&gt;sudo apt install -f&lt;/code&gt; but they aren't being fixed. What could be a better solution instead of hand installing every package? Does the package provider wasn't caring enough to see this or is APT?&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2019-01-25T05:34:59.030" Title="Can't install Mega on Juno" Tags="|release-juno|apt|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16888" PostTypeId="1" AcceptedAnswerId="16889" CreationDate="2018-11-03T10:41:48.547" Score="0" ViewCount="1281" Body="&lt;p&gt;I've just installed elementary OS Juno, but I'm getting into trouble when I try to get updates, both via AppCenter or terminal. It seems it cannot fetch updates since it cannot find Release file in the below repositories:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/bIiup.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bIiup.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this issue or change to correct repositiories?&lt;/p&gt;&#xA;" OwnerUserId="10473" LastActivityDate="2018-11-04T19:16:40.780" Title="Juno Failed to Fetch Updates - Missing Release file" Tags="|updates|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16889" PostTypeId="2" ParentId="16888" CreationDate="2018-11-03T11:39:26.617" Score="1" Body="&lt;p&gt;After checking every repository online, I fixed the issue by replacing &lt;code&gt;juno&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; in the below files:&#xA;&lt;code&gt;&#xA;/etc/apt/sources.list &#xA;/etc/apt/sources.list.d/appcenter.list&#xA;/etc/apt/sources.list.d/elementary.list&#xA;/etc/apt/sources.list.d/patches.list&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still, have no clue why the repository addresses were wrong.&lt;/p&gt;&#xA;" OwnerUserId="10473" LastActivityDate="2018-11-03T11:39:26.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16895" PostTypeId="1" AcceptedAnswerId="16921" CreationDate="2018-11-03T17:59:22.870" Score="0" ViewCount="402" Body="&lt;p&gt;I'm anxious to install the new version of Elementary Juno but it has Thunderbird 60 in its repos which has killed some of the extensions that I rely on. I currently have that package on hold with Freya. &#xA;How do I install, or does Elementary provide, older packaged versions of Thunderbird? I know I can download older versions from Mozilla directly, but I always run into issues when I do that and the integration doesn't seem work correctly. &#xA;I've been holding off upgrading Thunderbird due to this change so I'll have to wait and hope that the extensions I need are updated soon. &lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-11-05T06:06:24.567" Title="Installing previous version of Thunderbird" Tags="|release-juno|thunderbird|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16897" PostTypeId="2" ParentId="16455" CreationDate="2018-11-03T22:44:02.207" Score="1" Body="&lt;p&gt;GDog was correct, installing pavucontol is the workaround to this issue for now, Hopefully the Elementary team fixes this in the future!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install pavucontrol&#xA;&lt;em&gt;run pavucontrol&lt;/em&gt;&#xA;&lt;em&gt;In configuration, change the built in adio profile to digital stereo output&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;done. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks GDog!&lt;/p&gt;&#xA;" OwnerUserId="16217" LastActivityDate="2018-11-03T22:44:02.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16899" PostTypeId="1" CreationDate="2018-11-04T02:46:57.123" Score="0" ViewCount="399" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mbR0X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mbR0X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Juno's top bar can't apply with any theme I copy from Downloads folder to /usr/share/themes. And I used tweak tool from philip.scott. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="16219" LastEditorUserId="15904" LastEditDate="2018-11-30T20:17:01.570" LastActivityDate="2024-01-06T11:08:01.117" Title="My elementary os Juno's top bar doesn't work with another theme" Tags="|release-juno|ubuntu|gtk|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16900" PostTypeId="2" ParentId="16622" CreationDate="2018-11-04T02:57:29.197" Score="3" Body="&lt;p&gt;remove disable-light-locker package from the system.&lt;/p&gt;&#xA;" OwnerUserId="16220" LastActivityDate="2018-11-04T02:57:29.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16901" PostTypeId="2" ParentId="16526" CreationDate="2018-11-04T04:11:43.683" Score="2" Body="&lt;p&gt;The same happen to me since Juno, with Loki I could without issue. Now is not possible to upscale any video content&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way to bypass it is to maximize it/go fullscreen on the main display and then send it to the desired one (&lt;kbd&gt;WINKEY&lt;/kbd&gt;+&lt;kbd&gt;SHIFT&lt;/kbd&gt;+&lt;kbd&gt;RIGHT_ARROW&lt;/kbd&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't figure out where to watch in the logs to check what happen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use chrome to watch netflix and youtube in kiosk mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;just save the app shortcut then edit it and add &lt;strong&gt;--kiosk&lt;/strong&gt; and &lt;strong&gt;--window-position=X,0&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;where &lt;strong&gt;X&lt;/strong&gt; stand for the x coordinate where the second display starts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://peter.sh/experiments/chromium-command-line-switches/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://peter.sh/experiments/chromium-command-line-switches/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;check your displays with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;$ xrandr --query&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that will make chrome go fullscreen and load on the second display&#xA;for youtube -&gt; youtube.com/tv (works awesome)&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-16T22:37:57.507" LastActivityDate="2018-11-16T22:37:57.507" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16903" PostTypeId="2" ParentId="3712" CreationDate="2018-11-04T11:16:44.270" Score="6" Body="&lt;p&gt;Since Firefox Quantum, the extensions mentioned in the accepted answer has been &lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/htitle/&quot; rel=&quot;noreferrer&quot;&gt;discontinued&lt;/a&gt;. However, as noted by &lt;a href=&quot;https://elementaryos.stackexchange.com/a/15054/16223&quot;&gt;Mehmet Hanoğlu&lt;/a&gt; since Firefox 60+, the feature is supported out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable it, open the &lt;code&gt;Customise&lt;/code&gt; option in the Firefox main menu and uncheck the &lt;code&gt;Title bar&lt;/code&gt; check box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XATk4.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XATk4.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information, see the &lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1283299&quot; rel=&quot;noreferrer&quot;&gt;bugzilla bug report&lt;/a&gt; or &lt;a href=&quot;https://www.omgubuntu.co.uk/2017/11/firefox-nightly-adds-csd-option&quot; rel=&quot;noreferrer&quot;&gt;omgubuntu&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Tested on elementary 5.0)&lt;/p&gt;&#xA;" OwnerUserId="16223" LastActivityDate="2018-11-04T11:16:44.270" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16905" PostTypeId="2" ParentId="16789" CreationDate="2018-11-04T14:21:05.663" Score="0" Body="&lt;p&gt;This happens to me when i use Ayatana (tray icons) and use more than two extra icons. For example, i use Megasync and system-monitor icons. If i add another (telegram icon for example), bluetooth icon disappears.&#xA;Are you using ayatana indicators?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-04T14:21:05.663" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16906" PostTypeId="2" ParentId="16899" CreationDate="2018-11-04T16:42:08.390" Score="0" Body="&lt;p&gt;Elementary theme is made for this feature. There are some themes that work also. Download and try some. For example, you can use these:&lt;a href=&quot;https://drive.google.com/file/d/1TVOKt5NhFnnj1U8XItzjvrzlos64Mo-Y/view&quot; rel=&quot;nofollow noreferrer&quot;&gt;Juno OSX&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-04T16:42:08.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16907" PostTypeId="2" ParentId="16316" CreationDate="2018-11-04T17:26:16.233" Score="1" Body="&lt;p&gt;Yep, it seems you're using a different icon theme. That should be the culprit.&#xA;Change the icon back to Elementary and that should solve it.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-04T17:26:16.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16908" PostTypeId="2" ParentId="16787" CreationDate="2018-11-04T18:24:46.207" Score="0" Body="&lt;p&gt;try &quot;&lt;strong&gt;&lt;em&gt;pantheon-files&lt;/em&gt;&lt;/strong&gt;&quot; on terminal to open the file manager.&lt;/p&gt;&#xA;" OwnerUserId="14440" LastActivityDate="2018-11-04T18:24:46.207" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16909" PostTypeId="2" ParentId="16895" CreationDate="2018-11-04T18:44:54.977" Score="0" Body="&lt;p&gt;There are also ways to « force » use of not compatible extensions in TB…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forum.ubuntu-fr.org/search.php?search_id=447160902&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.ubuntu-fr.org/search.php?search_id=447160902&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In TB go to edit → preferences → advanced → advanced settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;( it's the « about config » like in Firefox )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There look for &lt;strong&gt;extensions.strictCompatibility&lt;/strong&gt; and set it from true to false by double-clicking on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That &lt;em&gt;may&lt;/em&gt; temporarily help you for the time before such extensions get updated but it's just a &lt;em&gt;not-so-safe workaround&lt;/em&gt;, remember to set it again to true once your favorite extensions are compatible anew.&lt;/p&gt;&#xA;" OwnerUserId="2471" LastActivityDate="2018-11-04T18:44:54.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16911" PostTypeId="1" AcceptedAnswerId="16933" CreationDate="2018-11-04T19:34:22.023" Score="0" ViewCount="2233" Body="&lt;p&gt;Following these steps: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -y ppa:philip.scott/elementary-tweaks&#xA;sudo apt update&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get this output, indicating an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;guillermo@guillermo-Elementary:/media/Aplicaciones/LibreOffice_6.0.6.2_Linux_x86-64_deb$ sudo add-apt-repository -y ppa:philip.scott/elementary-tweaks&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/add-apt-repository&quot;, line 107, in &amp;lt;module&amp;gt;&#xA;    sp = SoftwareProperties(options=options)&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 128, in __init__&#xA;    self.reload_sourceslist()&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 623, in reload_sourceslist&#xA;    self.distro.get_sources(self.sourceslist)    &#xA;  File &quot;/usr/lib/python3/dist-packages/aptsources/distro.py&quot;, line 93, in get_sources&#xA;    (self.id, self.codename))&#xA;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for elementary/juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help please?&lt;/p&gt;&#xA;" OwnerUserId="16226" LastEditorUserId="15904" LastEditDate="2018-11-06T19:50:57.607" LastActivityDate="2018-11-14T21:55:48.040" Title="Problems installing elementary tweaks in Juno" Tags="|release-juno|apt|ppa|thirdpartyapps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16913" PostTypeId="1" CreationDate="2018-11-04T21:13:57.340" Score="1" ViewCount="2608" Body="&lt;p&gt;After a brand new installation of Elementaty Juno (I come from Linux Mint) I got errors like this one, when updating the system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;El repositorio «http://packages.elementary.io/appcenter juno Release» no tiene un fichero de Publicación.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Translation is &lt;code&gt;The repository 'http://packages.elementary.io/appcenter juno Release' does not have a Release file.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to deactivate Juno repositories and only left &quot;bionic&quot;, as recommended here&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16888/juno-failed-to-fetch-updates-missing-release-file/16910#16910&quot;&gt;Juno Failed to Fetch Updates - Missing Release file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help please?&lt;/p&gt;&#xA;" OwnerUserId="16226" LastEditorUserId="84" LastEditDate="2019-11-22T23:49:16.183" LastActivityDate="2019-11-22T23:49:16.183" Title="Repository problems, on a new installed Juno" Tags="|appcenter|release-juno|apt|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16914" PostTypeId="2" ParentId="16787" CreationDate="2018-11-04T22:07:49.567" Score="0" Body="&lt;p&gt;I don't really understand why you want to change a command, but if you want, using an alias is the way&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, about detaching a process from a terminal, if you add &amp;amp; to the end it will detach and then you can close the terminal if you want/need and the process will continue running.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-04T22:07:49.567" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16915" PostTypeId="1" CreationDate="2018-11-04T22:11:53.333" Score="0" ViewCount="302" Body="&lt;p&gt;I installed Libreoffice from the official web site. Te application looks bad, with some sections dark, and letters in gray. Unconfortable to work with. How can I fully remove the isntallation? I executed &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge libreoffice*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the directory where all DEBS were stored, and from which I executed &quot;dpkg -i&quot;, I executed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo dpkg -r *.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get an error in Sanish, which translation is&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;error: you must specify the packets by their own names, not citing the&#xA;  names of the files in which they come&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16226" LastActivityDate="2019-05-05T11:05:09.217" Title="How to remove libreoffice?" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16916" PostTypeId="2" ParentId="16915" CreationDate="2018-11-04T22:49:34.287" Score="1" Body="&lt;p&gt;I used Synaptic to remove it. All fine&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap remove libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16226" LastEditorUserId="16827" LastEditDate="2019-05-05T11:05:09.217" LastActivityDate="2019-05-05T11:05:09.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16919" PostTypeId="1" AcceptedAnswerId="16932" CreationDate="2018-11-05T02:10:04.590" Score="0" ViewCount="133" Body="&lt;p&gt;I installed Libreoffice from the app store; did not look well (buttons, bars, etc., looked like very old GNome). I changed to one of the icon themes, and all text was vanished. What's wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/05Fye.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/05Fye.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16226" LastActivityDate="2018-11-05T11:08:15.457" Title="Libreoffice 6: no text shown in Juno version" Tags="|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16920" PostTypeId="1" AcceptedAnswerId="16935" CreationDate="2018-11-05T02:51:36.470" Score="0" ViewCount="183" Body="&lt;p&gt;I was working normally, had to go for a couple of hours. Left the system on, downloading an ISO in Opera,  and a couple of more apps opened. When I came back, a black screen with a big cursor was on the top, blinking... Seems mouse and keyboard responded, as HD reacted typing some keys, yet, screen all black. Had to turn off the computer.&#xA;I just installed Elementary for the first time in my PC, trying Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="16226" LastEditorUserId="15904" LastEditDate="2018-11-05T05:33:24.250" LastActivityDate="2018-11-05T15:34:20.313" Title="System crash after some idle time: Juno" Tags="|release-juno|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16921" PostTypeId="2" ParentId="16895" CreationDate="2018-11-05T06:06:24.567" Score="1" Body="&lt;p&gt;is pretty simple, first you need to check if there's a version available through apt (in your case exists)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt policy thunderbird&#xA;thunderbird:&#xA;  Instalados: (ninguno)&#xA;  Candidato:  1:60.2.1+build1-0ubuntu0.18.04.2&#xA;  Tabla de versión:&#xA;     1:60.2.1+build1-0ubuntu0.18.04.2 500&#xA;        500 http://cl.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages&#xA;        500 http://security.ubuntu.com/ubuntu bionic-security/main amd64 Packages&#xA;        500 http://ppa.launchpad.net/ubuntu-mozilla-security/ppa/ubuntu bionic/main amd64 Packages&#xA;     1:52.7.0+build1-0ubuntu1 500&#xA;        500 http://cl.archive.ubuntu.com/ubuntu bionic/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you install the older version with the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install thunderbird=1:52.7.0+build1-0ubuntu1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and finally you tell apt to hold on that pakage (that way you can do upgrades on the system and thunderbird will stay on that version)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-mark hold thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T06:06:24.567" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16922" PostTypeId="2" ParentId="12952" CreationDate="2018-11-05T06:20:37.487" Score="1" Body="&lt;p&gt;in my case (with loki and now with juno) I didn't have any issues installing kodi&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my current apt source&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/apt/sources.list.d/team-xbmc-ubuntu-ppa-bionic.list&#xA;deb http://ppa.launchpad.net/team-xbmc/ppa/ubuntu bionic main&#xA;# deb-src http://ppa.launchpad.net/team-xbmc/ppa/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to get it I just added the repo&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:team-xbmc/ppa&#xA;$ sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(newer apt doesn't need update, after you add a repo it will update itself)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install kodi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it's even on ubuntu's repo for bionic (juno)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt policy kodi&#xA;kodi:&#xA;  Instalados: 2:17.6+git20180430.1623-final-0bionic&#xA;  Candidato:  2:17.6+git20180430.1623-final-0bionic&#xA;  Tabla de versión:&#xA; *** 2:17.6+git20180430.1623-final-0bionic 500&#xA;        500 http://ppa.launchpad.net/team-xbmc/ppa/ubuntu bionic/main amd64 Packages&#xA;        500 http://ppa.launchpad.net/team-xbmc/ppa/ubuntu bionic/main i386 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     2:17.6+dfsg1-1ubuntu1 500&#xA;        500 http://cl.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Now to chek your system just use this command. That way we can see what version you have available and from where&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt policy kodi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: If add-apt-repository isn't found or you get an error, probably you need to install software-properties-common first, then run it again&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T06:20:37.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16923" PostTypeId="2" ParentId="16281" CreationDate="2018-11-05T06:35:39.533" Score="0" Body="&lt;p&gt;Maybe if you need desktop icons IMHO elementary isn't for you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The whole system doesn't need to have desktop icons, if you want to access files just open pantheon-files (io.elementary.files now). If you want to run apps just click on their menu or add them to the dock to get them quickly&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have conky on the back running and I barely see it while I'm working just when I choose to, I've never felt the need to &quot;go to the desktop&quot;. If there's anything like it maybe an open instance of pantheon-files (io.elementary.files) will suffice&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T06:35:39.533" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16924" PostTypeId="2" ParentId="16879" CreationDate="2018-11-05T06:50:07.127" Score="1" Body="&lt;p&gt;about the notification area, wasn't cut just used another system that apps don't have implemented yet (dropped ayatana)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but you can have it back&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then we need to edit a file (i used nano, use any editor you want - avoiding a holy war)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add Pantheon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's it, just restart X and you will have the old notification area icons&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T06:50:07.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16925" PostTypeId="2" ParentId="16911" CreationDate="2018-11-05T07:14:30.550" Score="0" Body="&lt;p&gt;run these commands and paste them&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ egrep -v '^#|^ *$' /etc/apt/sources.list /etc/apt/sources.list.d/*&#xA;&#xA;$ cat /etc/lsb-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this is my lsb-release file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=5.0&#xA;DISTRIB_CODENAME=juno&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS 5.0 Juno&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if yours is different, write it like mine&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/lsb-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(you can change nano and use another editor to do the job)&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T07:14:30.550" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16930" PostTypeId="2" ParentId="15746" CreationDate="2018-11-05T09:31:59.113" Score="3" Body="&lt;p&gt;You can do it by this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences focus-mode 'sloppy'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7026" LastActivityDate="2018-11-05T09:31:59.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16932" PostTypeId="2" ParentId="16919" CreationDate="2018-11-05T11:08:15.457" Score="1" Body="&lt;p&gt;Install &lt;code&gt;libreoffice-gtk3&lt;/code&gt; and &lt;code&gt;libreoffice-style-elementary&lt;/code&gt;.&#xA;Then go to preferences and select Elementary as default icons.&#xA;Also use Elementary icons as your default system icons.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-05T11:08:15.457" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16933" PostTypeId="2" ParentId="16911" CreationDate="2018-11-05T11:10:28.577" Score="1" Body="&lt;p&gt;Did you install &lt;code&gt;software-properties-common&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-05T11:10:28.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16934" PostTypeId="2" ParentId="12328" CreationDate="2018-11-05T15:31:04.193" Score="-1" Body="&lt;p&gt;Are you sure this is a problem caused in eOS? I'm using a cheap USB c hub with my xps 13 (9350) and it's working perfectly fine.&lt;/p&gt;&#xA;" OwnerUserId="16232" LastActivityDate="2018-11-05T15:31:04.193" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16935" PostTypeId="2" ParentId="16920" CreationDate="2018-11-05T15:34:20.313" Score="0" Body="&lt;p&gt;What settings do you have set under &quot;power&quot; in settings? &#xA;I have had some weird reboots happening when the system should have just suspended or even locked. I ended up setting everything to never. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also ran a command to keep the eOS from ever going into suspended mode. Because in my case that was what caused random reboots. &lt;/p&gt;&#xA;" OwnerUserId="16232" LastActivityDate="2018-11-05T15:34:20.313" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16937" PostTypeId="1" CreationDate="2018-11-05T19:32:37.817" Score="0" ViewCount="172" Body="&lt;p&gt;I'm trying to install elementaryOS on my Lenovo 80xc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded the elementaryos-5.0-stable.20181016 ISO.&#xA;I put it onto my USB using universal usb installer.&#xA;I go to boot select on startup, choose from usb, and choose install elementaryOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem: After this, the screen goes black, nothing happens for 10+ minutes. No e logo appeared first, no cursor blinking, nothing but black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;List of solutions I have tried: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I have secure boot turned off from the BIOS menu&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have tried adding nomodeset before quiet splash&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have tried adding  nouveau.modeset=0 before quiet splash&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have tried using a different usb and repeating the above.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Is there anything else I can do?&lt;/p&gt;&#xA;" OwnerUserId="16233" LastActivityDate="2024-03-17T15:04:40.493" Title="Cannot install eOS 5.0 from usb (list of tried solutions inside)" Tags="|dual-boot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16938" PostTypeId="2" ParentId="16937" CreationDate="2018-11-05T19:52:40.153" Score="0" Body="&lt;p&gt;Have you tried burning the USB image with any other program? Official docs recommend Etcher I think, but I can never get a working live USB with that. When all else fails, I turn to dd.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-11-05T19:52:40.153" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16939" PostTypeId="1" AcceptedAnswerId="16968" CreationDate="2018-11-05T22:39:08.953" Score="0" ViewCount="212" Body="&lt;p&gt;I updated my packages with Synaptic, and when I open the AppCenter i first get a &quot;Failed to fetch updates&quot; error message. As I understand from the other errors messages, this has something to do with faulty repositories. Here are mine : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Le dépôt http://archive.canonical.com/ubuntu loki Release n'a pas de fichier Release.&#xA;W: Les données depuis un tel dépôt ne peuvent être authentifiées et sont donc potentiellement dangereuses à utiliser.&#xA;W: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.&#xA;W: Le dépôt http://ppa.launchpad.net/moka/stable/ubuntu xenial Release n'a pas de fichier Release.&#xA;W: Les données depuis un tel dépôt ne peuvent être authentifiées et sont donc potentiellement dangereuses à utiliser.&#xA;W: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.&#xA;W: Le dépôt http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release n'a pas de fichier Release.&#xA;W: Les données depuis un tel dépôt ne peuvent être authentifiées et sont donc potentiellement dangereuses à utiliser.&#xA;W: Voir les pages de manuel d'apt-secure(8) pour la création des dépôts et les détails de configuration d'un utilisateur.&#xA;E: http://ppa.launchpad.net/moka/stable/ubuntu xenial/main amd64 Packages is not (yet) available (403 Forbidden)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I apologize for the language, but oddly enough when I try to change the system language and recreate the issue, I get &quot;Failed to obtain authorisation&quot; instead of the repositories list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently, all repositories listed do not have 'Release' files. Could it be because of the Switch to 5.0 ? I'm currently running 0.4.1&lt;/p&gt;&#xA;" OwnerUserId="16235" LastActivityDate="2018-11-07T13:41:38.263" Title="Failed to fetch updates, Too few items to process when trying to update from AppCenter" Tags="|updates|appcenter|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16940" PostTypeId="1" CreationDate="2018-11-05T22:43:11.413" Score="2" ViewCount="901" Body="&lt;p&gt;I am quite new to Linux.&#xA;After I did fresh install from iso and update system components from AppCenter(&lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;) I wanted to install net-tools using apt-get.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;firstly I did &lt;code&gt;sudo apt-get update&lt;/code&gt; but got error.&#xA;Screen from my vm (sorry cant install vmware tools because of &lt;code&gt;apt-get&lt;/code&gt; problem).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8WD3z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8WD3z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I have searched quite a lot and found lot of tips leading to editing &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; but since its fresh install I think it should work OOB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;running &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;returns &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Distributor id: elementary&#xA;Description: elementary OS 5.0 Juno&#xA;Release: 5.0&#xA;Codename: Juno&#xA;&#xA;&#xA;lsb_release -a -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Distributor id: Ubuntu&#xA;Description: Ubuntu 18.04 LTS&#xA;Release: 18.04&#xA;Codename: bionic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please help.&lt;br&gt;&#xA;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;edit 1:&lt;/strong&gt; It appears that AppCenter also fails fetching updates now. Message is the same. &lt;/p&gt;&#xA;" OwnerUserId="16234" LastEditorUserId="16827" LastEditDate="2019-01-08T13:47:02.220" LastActivityDate="2019-01-08T13:47:02.220" Title="Fresh installation - apt-get update fails with 403 forbidden" Tags="|updates|release-juno|apt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16941" PostTypeId="2" ParentId="16145" CreationDate="2018-11-05T23:03:04.830" Score="0" Body="&lt;p&gt;This works for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    xdg_path = new Granite.Services.Paths();&#xA;    app_xdg_path.initialize (Constants.bookworm_id, Constants.INSTALL_SCRIPTS_DIR);&#xA;    bookworm_config_path = app_xdg_path.user_data_folder.get_path();&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Are you missing the initialize step&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2018-11-05T23:03:04.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16942" PostTypeId="2" ParentId="16884" CreationDate="2018-11-05T23:10:26.007" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Loki = Ubuntu 16.04 (xenial)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Juno = Ubuntu 18.04 (bionic)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Megasync does not support ElementaryOS Juno right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can now download and install megasync.deb for Ubuntu 18.04 on Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is still a little problem that mega icon cannot see on the system tray.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Update&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;There's a version available for Juno (dic 4th 2018)&lt;/p&gt;&#xA;" OwnerUserId="16236" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:09.303" LastActivityDate="2018-12-05T23:45:09.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16943" PostTypeId="2" ParentId="16940" CreationDate="2018-11-05T23:44:24.340" Score="2" Body="&lt;p&gt;try removing the ppa&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then add it again, that way you'll get the key again&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is the repo's url&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/stable&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if the command add-apt-repository is missing, you need to install software-properties-common&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-05T23:44:24.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16944" PostTypeId="2" ParentId="10134" CreationDate="2018-11-06T00:52:33.710" Score="1" Body="&lt;p&gt;The &lt;code&gt;System Configuration&lt;/code&gt;-&gt; &lt;code&gt;Change Input Source&lt;/code&gt; not works for me, but use &lt;code&gt;fcitx configuration&lt;/code&gt; util helps.&lt;/p&gt;&#xA;" OwnerUserId="16237" LastActivityDate="2018-11-06T00:52:33.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16945" PostTypeId="1" AcceptedAnswerId="16946" CreationDate="2018-11-06T01:28:17.003" Score="0" ViewCount="590" Body="&lt;p&gt;On Juno, Intel Haswell notebook with external monitor, trying to turn off a monitor doesn't actually work. When I use&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Settings -&gt; Displays -&gt; any_monitor -&gt; Use This Display -&gt; OFF&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the monitor is still on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xrandr:&#xA;eDP-1 connected (built-in)&#xA;DP-1 connected (external monitor)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running&#xA;xrandr --output any_output --off&lt;/p&gt;&#xA;&#xA;&lt;p&gt;does work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried booting into stock 18.10 and the Settings/Displays app was able to set Single Display&lt;/p&gt;&#xA;" OwnerUserId="16238" LastEditorUserId="16238" LastEditDate="2018-11-06T01:35:41.230" LastActivityDate="2018-11-06T01:46:44.793" Title="Settings/Displays multi-monitor: turning off a display doesn't work on Juno/Intel Haswell" Tags="|settings|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T22:07:30.787" ContentLicense="CC BY-SA 4.0" />
  <row Id="16946" PostTypeId="2" ParentId="16945" CreationDate="2018-11-06T01:46:44.793" Score="0" Body="&lt;p&gt;it's a bug waiting for fix: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-display/issues/131&quot; rel=&quot;nofollow noreferrer&quot;&gt;#131&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can try 'super + p' combo to switch. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;on my side notebook with 1 intel gpu the combo works (can disable internal display), on notebook with intel + nvidia gpu not work(without external display plugin, and super+p makes it even more worse, the desktop completely unusable.)&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-06T01:46:44.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16947" PostTypeId="1" CreationDate="2018-11-06T03:15:00.527" Score="1" ViewCount="531" Body="&lt;p&gt;I have installed pycharm community in elementary juno but it is not showing in app launcher and anywhere and when i run this &lt;code&gt;./pycharm.sh&lt;/code&gt; from the extracted file in terminal it run... I can't even uninstall pycharm&#xA;thanks in advance &lt;/p&gt;&#xA;" OwnerUserId="16239" LastEditorUserId="16239" LastEditDate="2018-11-06T03:54:49.500" LastActivityDate="2018-11-06T07:36:03.677" Title="pycharm is not showing in app launcher and anywhere in elementary juno" Tags="|software-installation|applications|release-juno|elementary-website|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16948" PostTypeId="1" CreationDate="2018-11-06T03:59:15.373" Score="3" ViewCount="420" Body="&lt;p&gt;I installed elementary os on my laptop that already has some OS's installed. The way I achieve this is;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I have an efi partition &lt;code&gt;/dev/sda1&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;I have a LUKS container in &lt;code&gt;/dev/sda2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;The LUKS container has a LVM volume group names &lt;code&gt;Linux&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;I have a logical volume named Elementary under the LVM, accessible at &lt;code&gt;/dev/mapper/Linux-Elementary&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I already have a boot loader (rEFInd) configured, so what I did when I installed elementary is;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Booted live USB&lt;/li&gt;&#xA;&lt;li&gt;Used terminal to launch the installer with &lt;code&gt;--no-boot&lt;/code&gt; parameter; since I already have a boot loader.&lt;/li&gt;&#xA;&lt;li&gt;Used &lt;code&gt;cryptsetup open&lt;/code&gt; to decrypt the LUKS container at &lt;code&gt;/dev/sda2&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Installed EOS on &lt;code&gt;/dev/mapper/Linux-Elementary&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Copied all files in &lt;code&gt;/boot&lt;/code&gt; to my ESP and edited fstab accordingly.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;However, this leaves me with a couple hiccups. I suspect the initrd does not have any decryption built into it, because if I supply the kernel parameter &lt;code&gt;cryptdevice=UUID=&amp;lt;UUID-here&amp;gt;:cryptroot&lt;/code&gt; no decrpytion happens, and after a while I am dumped to busybox initramfs. There is a function in busybox called &lt;code&gt;cryptroot unlock&lt;/code&gt; but it gives me an output &lt;code&gt;sed: /conf/conf.d/cryptroot: No such file or directory&lt;/code&gt; when I run it. I am unfamiliar with ubuntu based methods of doing this; how do I add decryption to initramfs? (I can chroot in from my other distros to run commands)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also see a lot of files under &lt;code&gt;/boot&lt;/code&gt;, (&lt;code&gt;config-*&lt;/code&gt;, &lt;code&gt;abi-*&lt;/code&gt;, &lt;code&gt;retpoline-*&lt;/code&gt;, &lt;code&gt;System.map-*&lt;/code&gt;) which leads me to think that regular kernel parameters might not be enough. (I use &lt;code&gt;rw quiet splash root=/dev/Linux/Elementary&lt;/code&gt; in addition to the cryptdevice parameter) Can anyone guide me on what kernel parameters I should use? (Or share your working &lt;code&gt;refind_linux.conf&lt;/code&gt;?)&lt;/p&gt;&#xA;" OwnerUserId="16241" LastActivityDate="2024-03-23T19:04:30.533" Title="How to boot from existing LUKS partition? (dual boot)" Tags="|boot|system|kernel|encryption|refind|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16950" PostTypeId="2" ParentId="16947" CreationDate="2018-11-06T04:31:40.623" Score="3" Body="&lt;p&gt;There is a menu option in Pycharm to create a shortcut in the App Launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Start PyCharm...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo ./pycharm.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...like you mentioned above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Once PyCharm is up and running, go to the &lt;strong&gt;Tools&lt;/strong&gt; menu and select &lt;strong&gt;&quot;Create Desktop Entry...&quot;&lt;/strong&gt;  I think it also asks you if you want to create the desktop entry for all users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iFdko.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iFdko.png&quot; alt=&quot;Pycharm - Create Desktop Entry&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the Pycharm program will be in the Application menu.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-06T07:36:03.677" LastActivityDate="2018-11-06T07:36:03.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16951" PostTypeId="2" ParentId="16913" CreationDate="2018-11-06T06:28:44.167" Score="1" Body="&lt;p&gt;Change in /etc/apt/sources.list.d/appcenter.list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://packages.elementary.io/appcenter juno main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://packages.elementary.io/appcenter bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(juno -&gt; bionic)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://elementaryos.stackexchange.com/a/16889/14940&quot;&gt;https://elementaryos.stackexchange.com/a/16889/14940&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;After checking every repository online, I fixed the issue by replacing juno with bionic in the below files:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/apt/sources.list &#xA;/etc/apt/sources.list.d/appcenter.list&#xA;/etc/apt/sources.list.d/elementary.list&#xA;/etc/apt/sources.list.d/patches.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-06T08:12:58.750" LastActivityDate="2018-11-06T08:12:58.750" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16952" PostTypeId="2" ParentId="16877" CreationDate="2018-11-06T06:36:48.563" Score="0" Body="&lt;p&gt;About notificacion icons. Juno dropped the support of the old ayatana&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the software devs implement the new way you can have them back by...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to edit a file (i used nano, use any editor you want - avoiding a holy war)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add Pantheon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's it, just restart X and you will have the old notification area icons&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-06T06:36:48.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16953" PostTypeId="2" ParentId="16937" CreationDate="2018-11-06T08:08:26.677" Score="0" Body="&lt;p&gt;You ran UUI so I asume you have access to a Windows machine, if isn't the case clarify it please&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After you follow below instructions (the hash part is very important), just choose Live mode to see if it loads. FYI you can install later inside the live distro running&lt;/p&gt;&#xA;&#xA;&lt;p&gt;**&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Use Rufus to create the bootable USB | &lt;a href=&quot;https://rufus.ie&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://rufus.ie&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;**&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h70PU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h70PU.png&quot; alt=&quot;Rufus main window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the official documentation&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#creating-an-installation-medium&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Rufus&lt;/li&gt;&#xA;&lt;li&gt;Insert your USB drive and select it in the &quot;Device&quot; list&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Disk or ISO image&quot; in the &quot;Boot selection&quot; list&lt;/li&gt;&#xA;&lt;li&gt;Click &quot;SELECT&quot; to choose the ISO that you downloaded previously.&lt;/li&gt;&#xA;&lt;li&gt;We generate a checksum (or hash sum) for elementary OS images so you can verify your downloaded file. This ensures that you've received the full, complete download and that your install image is not corrupted in any way. Click the checksum icon next to &quot;&lt;strong&gt;SELECT&lt;/strong&gt;&quot; and verify that the text next to &quot;&lt;strong&gt;SHA256&lt;/strong&gt;&quot; matches the following hash&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;a8c7b8c54aeb0889bb3245356ffcd95b77e9835ffb5ac56376a3b627c3e1950f&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;If the hashes match, click &quot;START&quot; and wait for the process to finish.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-06T08:08:26.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16954" PostTypeId="2" ParentId="16825" CreationDate="2018-11-06T08:25:32.467" Score="0" Body="&lt;p&gt;You need to enable Hardware Acceleration to avoid using the CPU for video&lt;/p&gt;&#xA;&lt;p&gt;(check status on chrome://gpu)&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to chrome://flags in Chrome&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find &amp;amp; enable &amp;quot;&lt;strong&gt;Override software rendering list&lt;/strong&gt;&amp;quot;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart Chrome&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Check the status again and you will see the green text &lt;strong&gt;Hardware accelerated&lt;/strong&gt; on WebGL and Video Decode among others&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;You can go to chrome://media-internals/ and see what's currently playing and there you can see details of the videos playing by chrome&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I was reading and found a pretty convincing solution&#xA;Youtube uses vp9 and vp8 codec and now only latests GPU can decode vp9. The solution is to force Youtube to use h264&lt;/p&gt;&#xA;&lt;p&gt;For Chrome you have this extension:&#xA;&lt;a href=&quot;https://chrome.google.com/webstore/detail/h264ify/aleakchihdccplidncghkekgioiakgal/related&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://chrome.google.com/webstore/detail/h264ify/aleakchihdccplidncghkekgioiakgal/related&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;For Firefox you have this extension:&#xA;&lt;a href=&quot;https://addons.mozilla.org/es/firefox/addon/h264ify/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://addons.mozilla.org/es/firefox/addon/h264ify/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;YT probably has not re-encoded all videos to VP9 yet, they used to be VP8. Only newer GPUs can decode VP9 on hardware. For example, GeForce 970 can't, but 1070 can. When GPU can't decode on hardware, the task falls to CPU.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/windows/comments/7qafpj/high_cpu_usage_with_youtube/dsnst89&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/windows/comments/7qafpj/high_cpu_usage_with_youtube/dsnst89&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The issue is that with Netflix and other services choosing VP9, you are stuck decoding it through the CPU.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;So, to be able to have a browser with hardware acceleration we need Chromium with a VAAPI patch&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Esaiarcot895/+archive/ubuntu/chromium-beta&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~saiarcot895/+archive/ubuntu/chromium-beta&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:saiarcot895/chromium-beta&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install chromium-browser&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Then open Chromium and go to &lt;code&gt;chrome://flags/#enable-accelerated-video&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;ENABLE it and restart Chromium&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now you need to install your VAAPI driver, probably you have it. That you'll have to check for yourself because I really don't know which one you need. For Intel GPU some sites say you need &lt;code&gt;i965-va-driver&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install i965-va-driver&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can check the status with &lt;code&gt;vainfo&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install vainfo&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Finally install h264ify (link above - For Chrome) to force Youtube to use h264. If you GPU can decode VP9 you don't need this.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;=== Widevine Support ===&lt;/p&gt;&#xA;&lt;p&gt;The packages in this PPA have support for Widevine inside Chromium enabled. However, you still need to copy some files from Chrome into Chromium for you to use Netflix (or other websites using Encrypted Media Extensions) in Chromium.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download and install Chrome (or extract the necessary files, if you know how to do that).&lt;/li&gt;&#xA;&lt;li&gt;From the Chrome installation directory (probably /opt/google/chome or something similar), copy libwidevinecdm.so into ~/.config/chromium.&lt;/li&gt;&#xA;&lt;li&gt;Restart Chromium.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Esaiarcot895/+archive/ubuntu/chromium-beta&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~saiarcot895/+archive/ubuntu/chromium-beta&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-11-08T07:13:40.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16955" PostTypeId="2" ParentId="16884" CreationDate="2018-11-06T10:44:59.630" Score="1" Body="&lt;p&gt;You can install MegaSync from &lt;a href=&quot;https://mega.nz/sync&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; (use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; if you want to do it from a GUI), and install Ayatana indicators, which will show the 'normal' tray icons. But keep in mind that this is an unsupported change. If you really want to do it, just install &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/releases/download/0.1/indicator-application-patched.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; and &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+files/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; and you're good to go.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-11-06T16:34:49.747" LastActivityDate="2018-11-06T16:34:49.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16956" PostTypeId="2" ParentId="16510" CreationDate="2018-11-06T11:57:45.557" Score="0" Body="&lt;p&gt;You can solve the problem introducing the following line directly on the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo sed -i '/Icon[.*]/d' /usr/share/applications/gala-multitaskingview.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It removes all entries with the pattern &quot;Icon=[.*]&quot; from the file /usr/share/applications/gala-multitaskingview.desktop that cause the problem and leaves only the correct line which says: Icon=multitasking-view&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The icon is part of Gala and the problem has been reported on GitHub:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://github.com/elementary/gala/issues/358&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://github.com/elementary/gala/issues/358&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8162" LastEditorUserId="8162" LastEditDate="2018-11-09T00:59:50.253" LastActivityDate="2018-11-09T00:59:50.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16957" PostTypeId="2" ParentId="12508" CreationDate="2018-11-06T13:26:23.830" Score="4" Body="&lt;p&gt;To add to Axel's answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The packages that elementary is responsible for are updated frequently. Think about the Wingpanel (top panel), Gala (window manager), apps like Files, Videos etc.&lt;br&gt;&#xA;One great example was the introduction of the AppCenter in the Loki 0.4.1 release.&lt;br&gt;&#xA;See: &lt;a href=&quot;https://medium.com/elementaryos/new-release-elementary-os-loki-0-4-1-2a756549ee76&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/elementaryos/new-release-elementary-os-loki-0-4-1-2a756549ee76&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two quotes from Daniel Foré on Reddit:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;It wouldn’t be possible to have an app ecosystem and be completely rolling. We need stable APIs. We’re already semi-rolling in that all 3rd party apps published in AppCenter continue to receive updates, all 1st party packages get updates, and the Ubuntu LTS hardware enablement stack is also rolling these days. The only things that don’t continually update are 3rd party apps and libraries inherited from Ubuntu.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/8padqj/what_would_be_required_to_make_eos_a_rolling/e09mtrv/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;As you know, we do currently roll the apps and desktop environment. We're pushing fixes and new features on a regular basis to all parts of the operating system. So from a user perspective, it's more or less rolling already.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;As others have said, having a known good stable API is important for developers so that they can build apps for elementary OS. If we rolled the base, that would make it much harder for 3rd party developers to keep up and it implies breaking their apps and that would make users very unhappy when their favorite app suddenly doesn't work anymore because API it depended on has changed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;As far as release upgrades go, this hasn't gone well in the past because we were using Ubuntu's tools for managing and updating software. Now that we've deployed AppCenter, we have more of a basis to try to make this possible, but testing that won't really be possible until later this year when we'll have alphas of the new LTS to attempt upgrades to. We have a sprint planned with System76 at the end of August where we'll be working on installation and onboarding and I would guess that release upgrades is a topic that will come up if we have time.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;In the distant future I can imagine that because of the way that sandboxed package formats like Snap and Flatpak make use of a runtime/platform that having a stable API for developers will be easier to provide since you could theoretically have multiple runtimes/platforms installed at the same time. So maybe in 5 years or whatever we could be much more aggressively rolling more parts of the operating system without making it hard for developers to write apps for elementary OS.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;As a side note, another way to make moving from one release to another less painful is with deeper cloud service integration. Moving to a new computer or setting up an additional computer is a task that should also be simple. When I get a new phone, it's easy to restore all of my data and settings because of services like iCloud. So that's definitely a goal in the future is to eliminate the back up step and make sure that all the things are already backed up always and easy to restore with a single sign on.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/6qjkun/is_it_time_to_talk_about_rolling_release/dkyxi4n&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-11-06T13:55:40.160" LastActivityDate="2018-11-06T13:55:40.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16958" PostTypeId="2" ParentId="14038" CreationDate="2018-11-06T19:37:02.617" Score="1" Body="&lt;p&gt;Opera is working fine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just used snap to install it and here you can see the main window&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/opera&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/opera&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/umdbC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/umdbC.png&quot; alt=&quot;Opera browser main dark window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now if I disable the sidebar in settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lxr2t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lxr2t.png&quot; alt=&quot;Opera browser main dark window, sidebar disabled&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This is the APT version of Opera, same images&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LDVbD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LDVbD.png&quot; alt=&quot;Opera browser main light window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KsFAr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KsFAr.png&quot; alt=&quot;Opera browser main light window, sidebar disabled&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install it through APT just:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wget -qO- https://deb.opera.com/archive.key | sudo apt-key add -&#xA;$ sudo add-apt-repository 'deb https://deb.opera.com/opera-stable/ stable non-free'&#xA;$ sudo apt-get install opera-stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://deb.opera.com/manual.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://deb.opera.com/manual.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(current add-apt-repository run and update after you add a repo, so you need to add the key first)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Maybe your problem is that you have residual settings in your /home?&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-06T19:37:02.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16962" PostTypeId="2" ParentId="14340" CreationDate="2018-11-07T02:10:51.500" Score="0" Body="&lt;p&gt;if you have the driver installed...check inside&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/X11/xorg.conf.d/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you need the driver, then check again&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-07T02:10:51.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16963" PostTypeId="2" ParentId="16766" CreationDate="2018-11-07T03:27:51.987" Score="1" Body="&lt;p&gt;This seems to be a limitation (bug?) of the current sound setting app. The current workaround is to install &lt;code&gt;PulseAudio Volume Control&lt;/code&gt; from the &lt;code&gt;AppCentre&lt;/code&gt;, and to select a HDMI configuration profile.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LOC7x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LOC7x.png&quot; alt=&quot;Select Profile from Configuration Tab&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;References:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16455/elementary-os-juno-no-sound-on-usb-c-monitor&quot;&gt;Related Stackexchange Issue&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-sound/issues/65&quot; rel=&quot;nofollow noreferrer&quot;&gt;Related Github Issue&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16253" LastActivityDate="2018-11-07T03:27:51.987" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16964" PostTypeId="2" ParentId="16010" CreationDate="2018-11-07T04:38:43.693" Score="1" Body="&lt;p&gt;You need to realize that when you choose to install ElementaryOS, you choose Wingpanel+Plank+Gala and NOT Mate, not even Unity&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when you read inside the file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/mate-system-monitor.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you can find the following line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=MATE;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;pretty clear&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can try removing that line but that app is part of the Mate environment not Elementary, you should go to their website to ask them how to run it outside Mate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/mate-desktop/mate-utils/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mate-desktop/mate-utils/issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;PS: the message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;is &quot;normal&quot;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-07T04:38:43.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16966" PostTypeId="2" ParentId="16884" CreationDate="2018-11-07T12:00:33.340" Score="1" Body="&lt;p&gt;megacmd from mega.nz site works perfectly on Juno if you have no console barrier.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;megasync(for Ubuntu 18.04) also works without indicator.&#xA;It does shows warning for the first launch that system tray doesn't exist but relaunch of a program shows the main window.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastEditorUserId="9770" LastEditDate="2019-01-25T05:34:59.030" LastActivityDate="2019-01-25T05:34:59.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16968" PostTypeId="2" ParentId="16939" CreationDate="2018-11-07T13:41:38.263" Score="0" Body="&lt;p&gt;You have two problems here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first is that something has happened to your &lt;code&gt;http://archive.canonical.com/ubuntu&lt;/code&gt; repository as it has &lt;code&gt;loki&lt;/code&gt; as the release codename when this should be &lt;code&gt;xenial&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to replace all instances of &lt;code&gt;loki&lt;/code&gt; with &lt;code&gt;xenial&lt;/code&gt; in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and the files within &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt;. See another of my answers here for more information: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/15236/9699&quot;&gt;https://elementaryos.stackexchange.com/a/15236/9699&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second issue is you have some PPAs enabled that aren't compatible with loki or that don't exist anymore:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;versable/elementary-update&lt;/code&gt; is not loki compatible&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;moka/stable&lt;/code&gt; doesn't exist anymore.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So removing both of those PPAs from your sources files should also help resolve this issue.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-11-07T13:41:38.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16973" PostTypeId="1" CreationDate="2018-11-07T18:36:55.340" Score="1" ViewCount="57" Body="&lt;p&gt;is it possible to hide user list from the power button in top right corner? There are many users in the system and the menu stretches all over the screen.&lt;/p&gt;&#xA;" OwnerUserId="16261" LastActivityDate="2018-11-07T18:36:55.340" Title="Is it possible to hide user list from the power button in top right corner?" Tags="|settings|user-interface|user|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16975" PostTypeId="1" CreationDate="2018-11-07T19:05:05.073" Score="0" ViewCount="789" Body="&lt;p&gt;I'm missing 4 icons in AppCenter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SRcaj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SRcaj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zEuWT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zEuWT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/LnWYs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LnWYs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hy4UP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hy4UP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the other application icons are displayed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like there was a similar issue in Loki...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10444/app-center-missing-icons-on-loki&quot;&gt;App Center missing icons on Loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;..but that looks like it was missing all icons, not just a select few.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way for me to fix this or is this something for the developers to look at?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody else experiencing this issue? Are they the same missing icons or different ones?&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-07T19:55:13.613" LastActivityDate="2024-03-12T06:03:10.470" Title="Missing Icons in AppCenter - Juno" Tags="|appcenter|release-juno|icons|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="16977" PostTypeId="1" CreationDate="2018-11-08T00:35:54.053" Score="1" ViewCount="374" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZIjhS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZIjhS.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;Just installed VLC from the Elementary appstore. The user interface shows huge buttons, very small text font, and over-sized menu windows. Can it be fixed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jBugh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jBugh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16226" LastEditorUserId="9548" LastEditDate="2019-05-19T03:38:55.000" LastActivityDate="2019-05-20T12:31:23.460" Title="VLC Player; User Interface completely altered because Qt scaling is broken" Tags="|applications|qt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16979" PostTypeId="1" CreationDate="2018-11-08T05:35:32.260" Score="1" ViewCount="1678" Body="&lt;p&gt;I have a HP OfficeJet Pro 8710 connected to local network. Worked in Loki flawlessly but I cannot get it to work in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pics below show my adding it (its hostname is actually &quot;printer&quot;) and while it installs, it shows as disabled in left menu regardless of anything I do on the right side. After clicking &quot;Print Test Page&quot;, it does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Juieu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Juieu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ZpjNC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZpjNC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ssci4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ssci4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8saWB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8saWB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14458" LastActivityDate="2019-10-29T22:44:56.417" Title="Cannot set up network printer in Juno (worked in Loki)" Tags="|release-juno|printer|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16980" PostTypeId="2" ParentId="16979" CreationDate="2018-11-08T06:05:10.353" Score="0" Body="&lt;p&gt;check &lt;code&gt;/var/log/cups/&lt;/code&gt; for access &amp;amp; error log.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-08T06:05:10.353" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="16981" PostTypeId="2" ParentId="16979" CreationDate="2018-11-08T06:50:50.020" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;All of the &lt;strong&gt;hp-setup&lt;/strong&gt; and installation was unnecessary. After new install and updated elementary OS 5.0 Juno, just open up &lt;a href=&quot;http://localhost:631&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631&lt;/a&gt; in your browser, click on &lt;strong&gt;Administration&lt;/strong&gt;, then &lt;strong&gt;Add Printer&lt;/strong&gt;. Enter your local username and password. Select &lt;strong&gt;Discovered Network Printers&lt;/strong&gt; of choice (in my case &lt;em&gt;HP OfficeJet Pro 8710&lt;/em&gt;) and continue with prompts to create printing defaults. This was rather simple printing configuration and the printer was immediately accessible to the applications.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;For scanning, I decided to use my printer feature and save all my scans directly to a network share. This way I don't have to bother with cumbersome setup and my scans are available throughout the local network.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Okay, I had a bunch of problems it seems but have gotten it to work now. Some of these steps may not be required, but it serves as a record of my troubleshooting steps that may help someone.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I started by removing (or trying to remove) printer from System Settings. Sometimes removing the printer via &lt;code&gt;-&lt;/code&gt; icon did not do anything. Printer was still listed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;As part of troubleshooting process, I ran &lt;code&gt;hp-makeuri&lt;/code&gt; from command line. For record, I have version 3.17.10 installed on Juno. I did not have to install any packages in particular. This was already installed on my system. When I tried to do &lt;code&gt;hp-makeuri &amp;lt;IP&amp;gt;&lt;/code&gt; I received some SNMP errors. I fixed these by:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) installing snmp via &lt;code&gt;sudo apt install snmp&lt;/code&gt; command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b) enabling SNMP on my printer: Network, Advanced, SNMP, Enable SNMPv1/v2 Read-Only access.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;During troubleshooting I tried to run &lt;code&gt;hp-setup&lt;/code&gt; which gave me dependency errors. I resolved these by installing required &lt;code&gt;sudo apt install python-qt4&lt;/code&gt;. I've ran &lt;code&gt;hp-setup&lt;/code&gt; to set up network printer. This was okay and it showed up in listed printers again, but I was not able to print a test page to it. I was also not able to remove it from listed printers in System Settings.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unknown to me before is that you can, on your local system, access &lt;code&gt;http://localhost:631/&lt;/code&gt; web page to manage CUPS where you can manage the print server. I clicked on Administration tab, entered my local username and password, and set up my printer via &lt;code&gt;Add Printer&lt;/code&gt; button. Once completed, I clicked &lt;code&gt;Manage Printers&lt;/code&gt; and clicked on my newly added printer. To my surprise, my printer was showing to be paused and rejecting jobs. In &lt;code&gt;Maintenance&lt;/code&gt; drop-down I have clicked &lt;code&gt;Resume Printer&lt;/code&gt; and &lt;code&gt;Accept Jobs&lt;/code&gt;. After this printing resumed!&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope this helps someone. Now, off to get the scanner working...&lt;/p&gt;&#xA;" OwnerUserId="14458" LastEditorUserId="14458" LastEditDate="2019-10-29T22:44:56.417" LastActivityDate="2019-10-29T22:44:56.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16982" PostTypeId="2" ParentId="16977" CreationDate="2018-11-08T07:43:39.310" Score="0" Body="&lt;p&gt;If you go to &lt;strong&gt;Tools&lt;/strong&gt; and then &lt;strong&gt;Customize&lt;/strong&gt; &lt;strong&gt;Interface&lt;/strong&gt;...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q1BqS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q1BqS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;... is the &lt;strong&gt;Big Button&lt;/strong&gt; button checked under &lt;strong&gt;Toolbar Elements&lt;/strong&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B8Ttn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B8Ttn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-09T07:26:01.730" LastActivityDate="2018-11-09T07:26:01.730" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16985" PostTypeId="2" ParentId="16535" CreationDate="2018-11-08T21:29:29.853" Score="2" Body="&lt;p&gt;Try installing the GPG key&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wget -q &quot;http://packages.elementary.io/key.asc&quot; -O- | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;, then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-08T21:29:29.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16986" PostTypeId="1" CreationDate="2018-11-08T21:55:58.433" Score="0" ViewCount="192" Body="&lt;p&gt;whenever i try to install i get this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The package linux-headers-4.1.0-040100rc2-generic needs to be reinstalled, but I can't find an archive for it.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The package linux-headers-4.1.0-040100rc2-generic needs to be reinstalled, but I can't find an archive for it.&#xA;E: Unable to apply corrections for half-installed packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16273" LastEditorUserId="26" LastEditDate="2018-12-02T16:42:15.833" LastActivityDate="2018-12-02T16:42:15.833" Title="cant sudo apt-install" Tags="|kernel|package-management|thirdpartyapps|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16987" PostTypeId="2" ParentId="16986" CreationDate="2018-11-08T22:42:00.750" Score="1" Body="&lt;p&gt;If you installed a third party kernel and then removed the source this could happen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not ElementaryOS's problem (because EOS didn't had that kernel version - Release Candidate) but I may help you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can remove the package even if it's broken with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo dpkg --remove --force-remove-reinstreq &amp;lt;package&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;And lastly, it's &lt;code&gt;sudo apt install&lt;/code&gt; not &lt;code&gt;sudo apt-install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-08T22:42:00.750" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="16990" PostTypeId="1" CreationDate="2018-11-09T06:23:44.617" Score="0" ViewCount="173" Body="&lt;p&gt;BIOS: Aptio flashed with the latest update.&#xA;Laptop: Dell 3179&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I installed ElementaryOS on my laptop in UEFI mode and the installer gave me an error about grub not being able to install, So i hastily changed to legacy mode in the BIOS and tried to reinstall, everything worked out with legacy mode...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then i realized that I should make an additional EFI partition in order for it to work under UEFI mode...So I headed back to BIOS settings, changed it to UEFI pressed F10 to save and exit, there was a hang for like 1 minute then system restarted ... but strangely enough, it was still in Legacy mode...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Juno boots flawlessly within 20 secs but I cannot save any changes in the BIOS after installing Juno in legacy mode....Will re-flashing the BIOS fix this ? &lt;/p&gt;&#xA;" OwnerUserId="16276" LastActivityDate="2023-12-13T17:02:10.233" Title="Installing Juno corrupted the BIOS, Cannot save changes in BIOS" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16991" PostTypeId="1" CreationDate="2018-11-09T06:42:44.833" Score="0" ViewCount="865" Body="&lt;p&gt;OS Juno, printer status changed to &quot;Paused - &quot;Rejecting Jobs&quot; periodically, maybe a few hours, or days. printer status will change.&#xA;have to do 'resume printer/accept jobs' in cups admin page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;have tried remove all printers and re-add. no luck.&#xA;printer operation policy is 'default'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/isS2M.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/isS2M.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;ken@element:/var/log/cups$ cat access_log&#xA;localhost - - [09/Nov/2018:09:38:13 +0800] &quot;POST / HTTP/1.1&quot; 200 349 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:09:38:13 +0800] &quot;POST / HTTP/1.1&quot; 200 176 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:09:38:15 +0800] &quot;POST / HTTP/1.1&quot; 200 291 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:18 +0800] &quot;POST / HTTP/1.1&quot; 200 293 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:09:38:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:01:18 +0800] &quot;POST / HTTP/1.1&quot; 200 182 Renew-Subscription client-error-not-found&#xA;localhost - - [09/Nov/2018:10:02:29 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:02:29 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:02:29 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 184 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:02:29 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 184 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:02:29 +0800] &quot;POST / HTTP/1.1&quot; 401 123 Cancel-Subscription successful-ok&#xA;localhost - root [09/Nov/2018:10:02:29 +0800] &quot;POST / HTTP/1.1&quot; 200 123 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:02:29 +0800] &quot;POST / HTTP/1.1&quot; 200 152 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:03:00 +0800] &quot;POST / HTTP/1.1&quot; 200 349 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:03:00 +0800] &quot;POST / HTTP/1.1&quot; 200 176 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:03:04 +0800] &quot;POST / HTTP/1.1&quot; 200 291 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:08 +0800] &quot;POST / HTTP/1.1&quot; 200 293 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:03:10 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:04:02 +0800] &quot;POST / HTTP/1.1&quot; 200 359 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:04:37 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:04:37 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:04:37 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 184 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:04:37 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 184 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:04:37 +0800] &quot;POST / HTTP/1.1&quot; 401 123 Cancel-Subscription successful-ok&#xA;localhost - root [09/Nov/2018:10:04:37 +0800] &quot;POST / HTTP/1.1&quot; 200 123 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:04:37 +0800] &quot;POST / HTTP/1.1&quot; 200 152 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:05:08 +0800] &quot;POST / HTTP/1.1&quot; 200 349 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:05:08 +0800] &quot;POST / HTTP/1.1&quot; 200 176 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:05:13 +0800] &quot;POST / HTTP/1.1&quot; 200 291 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:16 +0800] &quot;POST / HTTP/1.1&quot; 200 293 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:18 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:21 +0800] &quot;POST / HTTP/1.1&quot; 200 359 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:05:41 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:41 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:41 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 184 CUPS-Delete-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:05:41 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 184 CUPS-Delete-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:05:41 +0800] &quot;POST / HTTP/1.1&quot; 401 123 Cancel-Subscription successful-ok&#xA;localhost - root [09/Nov/2018:10:05:41 +0800] &quot;POST / HTTP/1.1&quot; 200 123 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:05:41 +0800] &quot;POST / HTTP/1.1&quot; 200 152 Cancel-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:10:06:34 +0800] &quot;POST / HTTP/1.1&quot; 200 349 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:06:34 +0800] &quot;POST / HTTP/1.1&quot; 200 176 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:10:06:38 +0800] &quot;POST / HTTP/1.1&quot; 200 291 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:42 +0800] &quot;POST / HTTP/1.1&quot; 200 293 CUPS-Create-Local-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 11004 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 207 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 12048 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - root [09/Nov/2018:10:06:44 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 208 CUPS-Add-Modify-Printer successful-ok&#xA;localhost - - [09/Nov/2018:10:06:50 +0800] &quot;POST / HTTP/1.1&quot; 200 359 Create-Printer-Subscriptions successful-ok&#xA;localhost - - [09/Nov/2018:11:05:10 +0800] &quot;POST / HTTP/1.1&quot; 200 182 Renew-Subscription successful-ok&#xA;localhost - - [09/Nov/2018:11:19:21 +0800] &quot;POST / HTTP/1.1&quot; 200 350 Create-Printer-Subscriptions client-error-bad-request&#xA;localhost - - [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 190 Pause-Printer successful-ok&#xA;localhost - root [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 190 Pause-Printer successful-ok&#xA;localhost - - [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 190 CUPS-Reject-Jobs successful-ok&#xA;localhost - root [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 190 CUPS-Reject-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 Pause-Printer successful-ok&#xA;localhost - root [09/Nov/2018:11:19:21 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 Pause-Printer successful-ok&#xA;localhost - - [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 CUPS-Reject-Jobs successful-ok&#xA;localhost - root [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 CUPS-Reject-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 181 Pause-Printer successful-ok&#xA;localhost - root [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 181 Pause-Printer successful-ok&#xA;localhost - - [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 181 CUPS-Reject-Jobs successful-ok&#xA;localhost - root [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 181 CUPS-Reject-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 189 Pause-Printer successful-ok&#xA;localhost - root [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 189 Pause-Printer successful-ok&#xA;localhost - - [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 189 CUPS-Reject-Jobs successful-ok&#xA;localhost - root [09/Nov/2018:11:19:22 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 189 CUPS-Reject-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:19:31 +0800] &quot;POST /admin/ HTTP/1.1&quot; 401 183 CUPS-Set-Default successful-ok&#xA;localhost - root [09/Nov/2018:11:19:31 +0800] &quot;POST /admin/ HTTP/1.1&quot; 200 183 CUPS-Set-Default successful-ok&#xA;localhost - - [09/Nov/2018:11:29:16 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 200 290 Create-Job server-error-not-accepting-jobs&#xA;localhost - - [09/Nov/2018:11:29:38 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 200 284 Create-Job server-error-not-accepting-jobs&#xA;localhost - - [09/Nov/2018:11:30:39 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 401 144 CUPS-Accept-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:30:50 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 401 144 CUPS-Accept-Jobs successful-ok&#xA;localhost - ken [09/Nov/2018:11:30:50 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 200 144 CUPS-Accept-Jobs successful-ok&#xA;localhost - - [09/Nov/2018:11:30:56 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 401 144 Resume-Printer successful-ok&#xA;localhost - ken [09/Nov/2018:11:30:56 +0800] &quot;POST /printers/HP_LaserJet_M3035_MFP_40EA4B HTTP/1.1&quot; 200 144 Resume-Printer successful-ok&#xA;ken@element:/var/log/cups$ cat error_log&#xA;E [09/Nov/2018:11:19:21 +0800] [Client 44] Returning IPP client-error-bad-request for Create-Printer-Subscriptions (no URI) from localhost&#xA;E [09/Nov/2018:11:29:16 +0800] [Client 156] Returning IPP server-error-not-accepting-jobs for Create-Job (ipp://localhost/printers/HP_LaserJet_M3035_MFP_40EA4B) from localhost&#xA;E [09/Nov/2018:11:29:38 +0800] [Client 156] Returning IPP server-error-not-accepting-jobs for Create-Job (ipp://localhost/printers/HP_LaserJet_M3035_MFP_40EA4B) from localhost&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;BR&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-12-05T23:45:04.890" Title="printer status changed to &quot;Paused - &quot;Rejecting Jobs&quot; periodically" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="16992" PostTypeId="2" ParentId="16990" CreationDate="2018-11-09T06:48:22.267" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;install eOS in bios mode&lt;/li&gt;&#xA;&lt;li&gt;set bios UEFI mode&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;if you are doing above ,then system boot in bios mode is correct. coz you change bios to UEFI mode does NOT means eOS will TRANSFORM itself to UEFI mode, you have to install OS in UEFI mode. (boot in UEFI and install).&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-09T06:48:22.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16993" PostTypeId="1" AcceptedAnswerId="16996" CreationDate="2018-11-09T07:51:47.947" Score="0" ViewCount="567" Body="&lt;p&gt;My system boots within 20 seconds which I guess is normal ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At boot, there is a command-line login screen that is visible for a small fraction of a second..is this normal too ? is there a way to remove it ?&lt;/p&gt;&#xA;" OwnerUserId="16276" LastActivityDate="2018-11-09T16:34:56.233" Title="How to smoothen up the boot process in Elementary juno" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16994" PostTypeId="2" ParentId="3956" CreationDate="2018-11-09T08:34:17.617" Score="4" Body="&lt;p&gt;Just in case someone runs into this on Juno:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.code.settings opened-files-view1 &quot;[]&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16278" LastActivityDate="2018-11-09T08:34:17.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16996" PostTypeId="2" ParentId="16993" CreationDate="2018-11-09T16:34:56.233" Score="1" Body="&lt;p&gt;I have the command screen too, it's normal. I would not mind it too much.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And your boot time is pretty good, I have around 50 seconds on a Dell XPS 9550.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2018-11-09T16:34:56.233" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="16997" PostTypeId="2" ParentId="16431" CreationDate="2018-11-10T01:17:09.203" Score="0" Body="&lt;p&gt;Try &lt;code&gt;grive2&lt;/code&gt;. &lt;a href=&quot;https://github.com/vitalif/grive2&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/vitalif/grive2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is command line but easy to use. there is a quick howto on installing and using it on Ubuntu based distros like elementary at this link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.techrepublic.com/article/how-to-sync-your-google-cloud-on-linux-with-grive2/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.techrepublic.com/article/how-to-sync-your-google-cloud-on-linux-with-grive2/&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have it working on my Elementary Os Juno &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; desktop right now.&lt;/p&gt;&#xA;" OwnerUserId="16283" LastEditorUserId="14940" LastEditDate="2018-12-05T23:43:26.040" LastActivityDate="2018-12-05T23:43:26.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="16998" PostTypeId="2" ParentId="761" CreationDate="2018-11-10T03:02:00.430" Score="0" Body="&lt;p&gt;You can find it in the Settings/About page.&lt;/p&gt;&#xA;" OwnerUserId="16128" LastActivityDate="2018-11-10T03:02:00.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17001" PostTypeId="2" ParentId="16585" CreationDate="2018-11-10T10:37:41.097" Score="1" Body="&lt;p&gt;This is a known issue and can be followed &lt;a href=&quot;https://github.com/elementary/os/issues/121&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disabling hardware acceleration in chrome settings seems to solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do so go to &lt;code&gt;//settings/?search=hardware%20acceleration&lt;/code&gt; and disable 'Use hardware acceleration when available'.&lt;/p&gt;&#xA;" OwnerUserId="16278" LastActivityDate="2018-11-10T10:37:41.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17002" PostTypeId="1" CreationDate="2018-11-10T11:06:23.537" Score="0" ViewCount="341" Body="&lt;p&gt;I recently installed Juno to my laptop and i found that WIFI is not working anymore. Previously, I had Loki installed, and WIFI was working fine. Because wifi is not working, I cannot installed any further update (driver, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is HP Envy 15&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know a solution for this?&lt;/p&gt;&#xA;" OwnerUserId="7175" LastEditorUserId="7175" LastEditDate="2018-12-11T07:46:47.790" LastActivityDate="2024-01-15T10:01:30.210" Title="Broadcom Wireless Driver not working after installing Juno" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17003" PostTypeId="2" ParentId="16595" CreationDate="2018-11-10T14:05:41.643" Score="1" Body="&lt;p&gt;I know this is not an answer, but I thought I would mention that I've got the same issue in Chrome on Juno over here, dual monitor setup with a GTX660TI. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of today an &lt;code&gt;sudo apt update&lt;/code&gt; and a &lt;code&gt;sudo apt upgrade&lt;/code&gt; has resolved the issue on my end. Thanks elementary team :)&lt;/p&gt;&#xA;" OwnerUserId="16162" LastEditorUserId="16162" LastEditDate="2018-11-10T15:54:01.723" LastActivityDate="2018-11-10T15:54:01.723" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17005" PostTypeId="1" CreationDate="2018-11-10T19:26:07.203" Score="0" ViewCount="509" Body="&lt;p&gt;For example, there is a .doc file in Files app and I can see what is in it. But I want to see just .doc template icon.&#xA;I'm using Juno.&lt;/p&gt;&#xA;" OwnerUserId="16289" LastEditorUserId="16289" LastEditDate="2018-11-10T19:34:39.210" LastActivityDate="2024-04-05T19:10:01.157" Title="How to disable file thumbnails?" Tags="|pantheon-files|release-juno|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17006" PostTypeId="2" ParentId="15465" CreationDate="2018-11-10T19:51:27.710" Score="0" Body="&lt;p&gt;I was never able to get this working properly, but to my delight, the newest release of Elementary OS 5 Juno has an updated package of HPLIP (version 3.17.10) and it's working great with my printer.  So, not an answer for this particular question, but it's resolved with an upgrade.&lt;/p&gt;&#xA;" OwnerUserId="11732" LastActivityDate="2018-11-10T19:51:27.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17007" PostTypeId="1" CreationDate="2018-11-10T20:29:07.570" Score="1" ViewCount="681" Body="&lt;p&gt;This is my first attempt at Elementary. I’ve managed to install it to the drive of my aging MacBook Air but the boot sequence ends in a black screen with 4 small icons in the upper right of the screen: wifi, Bluetooth , battery and power. &#xA;Mouse is functioning and the icons produce functioning drop down menus , but that’s it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was kind of hoping for something more. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions on how to proceed from here are welcome. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="16290" LastActivityDate="2018-11-16T14:50:10.540" Title="First install on a MacBook Air: black screen" Tags="|system-installation|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17009" PostTypeId="1" AcceptedAnswerId="17149" CreationDate="2018-11-11T07:13:12.390" Score="3" ViewCount="2238" Body="&lt;p&gt;I am trying to install eOS under Parallels Desktop 14 on a late 2014 iMac running High Sierra (10.12). The Mac and Parallels are up to date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While installing under Parallels, I create a custom config where I give the VM more RAM and more graphics memory. When done, it seems to load and install without problems but when it reboots, I get a black screen. The only thing on the screen is the little network icon and power icon at the top of the screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since eOS is based on Ubuntu, I found instruction on Parallel's website describing a similar problem with Ubuntu server. Unfortunately, I couldn't get it to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone installed Elementary OS in a Parallels VM? What did you do to get it to work. THANKS!&lt;/p&gt;&#xA;" OwnerUserId="16292" LastActivityDate="2018-12-14T06:13:47.387" Title="Installing Elementary OS in Parallels gives blank screen" Tags="|system-installation|virtualization|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17010" PostTypeId="2" ParentId="16431" CreationDate="2018-11-11T08:21:43.650" Score="0" Body="&lt;p&gt;As already suggested by Milos you can use&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://liberodark.github.io/ODrive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://liberodark.github.io/ODrive/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only problem I found was with the indicator in the wingpanel. You can resotre it following this guide:&#xA;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Juno doesn't support anymore 3rd party application indicator as described in this closed issue:&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel/issues/96&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/issues/96&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16018" LastActivityDate="2018-11-11T08:21:43.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17011" PostTypeId="2" ParentId="16544" CreationDate="2018-11-11T09:01:17.003" Score="6" Body="&lt;p&gt;I have juno running in an HP EliteBook 8460p with the screen rotation problem when I tilt the keyboard. To stop this, this worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop iio-sensor-proxy.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4025" LastActivityDate="2018-11-11T09:01:17.003" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17012" PostTypeId="1" AcceptedAnswerId="17030" CreationDate="2018-11-11T11:40:22.850" Score="1" ViewCount="952" Body="&lt;p&gt;In order to ask a better question for my issue about the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16936/appcenters-crashes-when-looking-at-installed-application-details&quot;&gt;AppCenter crashing on viewing app details&lt;/a&gt; I would like to paste some of the logs when the AppCenter crashes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where can I find said error logs for AppCenter or other applications in elementary OS 5 (Juno)?&lt;/p&gt;&#xA;" OwnerDisplayName="user15979" LastActivityDate="2018-11-12T10:38:46.783" Title="Where can I find the error logs when an application crashes?" Tags="|applications|appcenter|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17013" PostTypeId="1" CreationDate="2018-11-11T12:33:57.437" Score="0" ViewCount="1175" Body="&lt;p&gt;I have 1440x900 pixels (411x263 millimeters or 16.14173x10.11811 inches approximately) monitor and my resolution according to &lt;code&gt;xdpyinfo&lt;/code&gt; is 89X87 dots per inch. But it should be 89.2x88.94 isn't it? Do I need to bother about changing DPI slightly to 89x89 (maybe to another value 89x88) or not? If so how to accomplish it?&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2024-03-15T05:05:25.643" Title="How to change screen dpi in elementary Freya?" Tags="|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17014" PostTypeId="2" ParentId="17013" CreationDate="2018-11-11T13:31:13.150" Score="0" Body="&lt;p&gt;To my knowledge you cannot easily change the DPI in elementary OS or any other Gnome based environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You basically only have easy control over resolution and scaling factor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to calculate and set the optimal DPI by following &lt;a href=&quot;https://askubuntu.com/questions/197828/how-to-find-and-change-the-screen-dpi&quot;&gt;this answer for setting DPI in Ubuntu&lt;/a&gt;, but I would not recommend it. The actually numbers you see might not exactly match due to rounding or misreporting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my opinion it is better not to get hung up on the numbers, ask yourself whether it looks good to you. Elementary OS already handles high DPI screens very well by default.&lt;/p&gt;&#xA;" OwnerDisplayName="user15979" LastActivityDate="2018-11-11T13:31:13.150" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17015" PostTypeId="1" CreationDate="2018-11-11T14:02:19.457" Score="0" ViewCount="398" Body="&lt;p&gt;I installed elementary 0.4.1 and update it. But doesn't update to elementary 5.0 Juno. please tell me how can i update to Juno. i want Juno no matter what..........             &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please Help me .  I don't want to reinstall elementary OS for 5.0 Juno.&lt;/p&gt;&#xA;" OwnerUserId="16296" LastEditorUserId="16827" LastEditDate="2019-04-13T07:10:34.260" LastActivityDate="2019-04-16T00:10:48.787" Title="How to update from elementary OS loki to juno?" Tags="|release-loki|system-installation|release-juno|" AnswerCount="2" CommentCount="0" ClosedDate="2019-04-16T00:10:29.700" ContentLicense="CC BY-SA 4.0" />
  <row Id="17017" PostTypeId="1" AcceptedAnswerId="17024" CreationDate="2018-11-11T16:26:30.293" Score="0" ViewCount="142" Body="&lt;p&gt;I installed Elementary OS since 2 weeks now, and I wanted to install &lt;em&gt;Syncthing&lt;/em&gt;, what I did... But I went to &lt;a href=&quot;https://apt.syncthing.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this page&lt;/a&gt; and due to my window width, I typed 2 commands instead of one :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;deb https://apt.syncthing.net/ syncthing stable&amp;quot; | sudo tee /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo tee /etc/apt/sources.list/syncthing.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Or something like that, I don't remember precisely.&#xA;Then I typed the entire command without error :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;deb https://apt.syncthing.net/ syncthing stable&amp;quot; | sudo tee /etc/apt/sources.list.d/syncthing.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This didn't prevented me to install Syncthing.&#xA;But after that, I had a error message from the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; telling me that it wasn't able to update its database, since then I can only see the installed apps in the AppCenter and install some that it already had in memory in the suggestion category. The error message doesn't appears anymore, because the AppCenter, even after multiple uninstall (with &lt;code&gt;apt purge&lt;/code&gt;) reboot and reinstall, doesn't have anymore the little spinning round which normally indicates it is looking for &lt;a href=&quot;/questions/tagged/updates&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;updates&amp;#39;&quot; rel=&quot;tag&quot;&gt;updates&lt;/a&gt; or some software corresponding to what you typed in the research field.&lt;/p&gt;&#xA;&lt;p&gt;I also saw these issues report &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12237/app-center-package-website-down?rq=1&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8141/empty-appcenter&quot;&gt;there&lt;/a&gt; but it didn't solve my problem.&lt;/p&gt;&#xA;&lt;p&gt;So my computer is still usable but I can't do any update or searching/installing software via the AppCenter anymore.&lt;/p&gt;&#xA;&lt;p&gt;Also,it is strange there is no such OS update that I was used to with the AppCenter when I do it with:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aQuMS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aQuMS.png&quot; alt=&quot;apt-get update&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xfgyl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xfgyl.png&quot; alt=&quot;apt update&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Each day I normally have a new software update, I think because &lt;a href=&quot;/questions/tagged/juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;juno&lt;/a&gt; is young. And here no update since two days! Moreover, if this problem get fixed with an update, I will not be able to do this update.&#xA;As you can see I learn Italian, I'm french and I am writing in English; please excuse me for language issues.&lt;/p&gt;&#xA;&lt;p&gt;Thank you for reading me until here, if somebody has an idea.&lt;/p&gt;&#xA;" OwnerUserId="16297" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-01-07T18:06:38.843" Title="Apt repo add with human error, empty AppCenter" Tags="|updates|software-installation|system|appcenter|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17019" PostTypeId="2" ParentId="17015" CreationDate="2018-11-11T17:26:52.037" Score="5" Body="&lt;p&gt;There is no way to update from an elementary version to another one. You have to clean install every time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully in the next version they will add the option to update.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2018-11-11T17:26:52.037" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17021" PostTypeId="2" ParentId="17005" CreationDate="2018-11-11T17:53:25.330" Score="0" Body="&lt;p&gt;There is a org/gnome/desktop/thumbnailers/disable-all setting but at the moment Files does not appear to honor it.  I would raise an issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; about this.   You might point at that other filemanagers (e.g. Nemo) do have a setting do disable local thumbnails.  Files only has a setting to disable remote thumbnails.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-11-11T17:53:25.330" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17023" PostTypeId="1" AcceptedAnswerId="17066" CreationDate="2018-11-11T20:26:39.670" Score="0" ViewCount="195" Body="&lt;p&gt;I get the following error when I launch the &lt;strong&gt;AppCentre&lt;/strong&gt;. It reads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;E: Repository 'http://dl.google.com/linux/chrome/deb stable Release' changed its 'Origin' value from 'Google, Inc.' to 'Google LLC'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had installed Chrome via Eddy. When I encountered this error, I uninstalled it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I could not get rid of this error. I have attached a screenshot of how it displays. How do I get rid of it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C3iBn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C3iBn.png&quot; alt=&quot;Error on launching &amp;quot;App Store&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4319" LastEditorUserId="14940" LastEditDate="2018-11-30T20:07:32.340" LastActivityDate="2018-11-30T20:07:32.340" Title="Error on launching the &quot;App Store&quot;" Tags="|appcenter|apt|google-chrome|repositories|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17024" PostTypeId="2" ParentId="17017" CreationDate="2018-11-11T20:48:00.803" Score="1" Body="&lt;p&gt;Open Files as administrator (Right click on the icon&gt; New Window as Admin) and navigate to &lt;code&gt;/etc/apt/&lt;/code&gt; . Check the file &lt;code&gt;sources.list&lt;/code&gt; and compare with this one. If it has the same entries then it's fine.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# deb cdrom:[elementary OS 5.0 _Juno_ - Stable amd64 (20181016)]/ bionic contrib main non-free&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic universe&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://es.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;# deb-src http://es.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the &lt;strong&gt;folder&lt;/strong&gt; &lt;code&gt;sources.list&lt;/code&gt; exist, delete it. Make sure you are deleting the folder and not the file with the same name!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now go to the folder &lt;code&gt;sources.list.d&lt;/code&gt; and check that you have a file called &lt;code&gt;syncthing.list&lt;/code&gt;. If you do, then all good. Otherwise you'd need to execute again &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;deb https://apt.syncthing.net/ syncthing stable&quot; | sudo tee /etc/apt/sources.list.d/syncthing.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Everything is back to normal now. If you don't get new updates it's because there aren't any&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-11-11T20:48:00.803" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17025" PostTypeId="2" ParentId="16940" CreationDate="2018-11-12T02:43:57.663" Score="0" Body="&lt;p&gt;Its still broken over on my system and yes I tried removing and re-adding the repository it didn't seem to do much to fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My best guess after digging around the elementary OS Beta StackExchange is to replace the sources with bionic instead of juno to fix the issue through some sort of way I can't find yet.&lt;/p&gt;&#xA;" OwnerUserId="16303" LastEditorUserId="16303" LastEditDate="2018-11-12T02:57:48.620" LastActivityDate="2018-11-12T02:57:48.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17026" PostTypeId="1" AcceptedAnswerId="17027" CreationDate="2018-11-12T04:23:33.217" Score="1" ViewCount="2765" Body="&lt;p&gt;I found this question and decieded to try it out:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16343/how-do-i-configure-the-plank-in-elementary-os&quot;&gt;how do i configure the plank in elementary os?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I held the &lt;strong&gt;ctrl&lt;/strong&gt; button, right-clicked the Plank, and selected Preferences.&#xA;I then clicked Docklets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I double-clicked &lt;strong&gt;Applications&lt;/strong&gt; and &lt;strong&gt;Desktop&lt;/strong&gt; and they were put on the Plank. But now I can't remove them. Double-clicking them again won't remove them. There is no &lt;strong&gt;&quot;Keep in Dock&quot;&lt;/strong&gt; box to uncheck. Anybody know how I can do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4BQry.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4BQry.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-12T08:22:39.510" LastActivityDate="2020-09-05T12:43:31.033" Title="How do I remove build-in docklets from Plank?" Tags="|release-juno|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17027" PostTypeId="2" ParentId="17026" CreationDate="2018-11-12T06:08:13.953" Score="7" Body="&lt;p&gt;drag 'Desktop' icon from dock to somewhere else. &lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-12T06:08:13.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17029" PostTypeId="2" ParentId="8685" CreationDate="2018-11-12T09:54:25.200" Score="0" Body="&lt;p&gt;recommend use &quot;virt-manager&quot; instead of 'boxes'&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-12T09:54:25.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17030" PostTypeId="2" ParentId="17012" CreationDate="2018-11-12T10:38:46.783" Score="1" Body="&lt;p&gt;&lt;code&gt;journalctl -xe&#xA;cat /var/log/syslog&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-12T10:38:46.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17031" PostTypeId="1" CreationDate="2018-11-12T11:07:00.107" Score="0" ViewCount="98" Body="&lt;p&gt;i've recently installed eOS on my Primebok 13 (with Touchscreen) and had some bugs. When send the nb to sleep and resume it, touchscreen will not work after resume. Touchscreen will work after a restart. I had to install touchpad and touchscreen drivers manualy. is this a known problem and a easy fix available? Thx&lt;/p&gt;&#xA;" OwnerUserId="16310" LastActivityDate="2024-04-03T07:07:00.840" Title="Touchscreen after sleep not working" Tags="|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17033" PostTypeId="2" ParentId="16479" CreationDate="2018-11-12T13:41:55.427" Score="1" Body="&lt;p&gt;I had the same issue. It seems the system tries to go into suspend at around 15-20 minutes, but fails, and keyboard and mouse are non-responsive. Power button will not wake up. Wake on LAN will not work. Hard reset is required.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now I disabled suspend. Must be done in the terminal as per this post: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16029/elementary-os-juno-beta-goes-to-sleep-when-it-is-not-supposed-to&quot;&gt;elementary OS Juno beta goes to sleep when it is not supposed to&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="985" LastActivityDate="2018-11-12T13:41:55.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17039" PostTypeId="2" ParentId="17023" CreationDate="2018-11-12T18:03:26.020" Score="0" Body="&lt;p&gt;Try running this terminal command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this does not fix the App Center warning, try removing the repository from your system. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/google-chrome.list&#xA;sudo rm /etc/apt/sources.list.d/google-chrome.list.save&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This means you will not longer get updates for google chrome. You will have to reinstall google chrome to get updates. You can do this via third party repository or by downloading and installing the .deb file directly from google.&lt;/p&gt;&#xA;" OwnerUserId="985" LastActivityDate="2018-11-12T18:03:26.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17040" PostTypeId="1" AcceptedAnswerId="17042" CreationDate="2018-11-12T18:48:30.240" Score="1" ViewCount="818" Body="&lt;p&gt;This question has been asked before but the answer is not working in 5.0. There is no sound effects options anywhere.&#xA;How Can I disable the file delete sound effects in 5.0?&lt;/p&gt;&#xA;" OwnerUserId="16317" LastActivityDate="2019-02-21T22:25:53.350" Title="How can I disable sound effect of deleting files in Elementary OS 5?" Tags="|pantheon-files|release-juno|sound|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17041" PostTypeId="1" CreationDate="2018-11-12T18:50:13.410" Score="0" ViewCount="145" Body="&lt;p&gt;why doesn't elementary OS include applications like libreoffice, task manager or create office applications &quot;by own&quot; to be more exclusive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="14595" LastEditorUserId="16827" LastEditDate="2019-04-13T08:39:29.910" LastActivityDate="2019-04-13T08:39:29.910" Title="elementary OS included software" Tags="|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17042" PostTypeId="2" ParentId="17040" CreationDate="2018-11-12T19:02:49.100" Score="4" Body="&lt;p&gt;You can use the Event Sounds option in the Sound settings to disable this sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In previous versions of Elementary OS this option didn't work. The old workaround is below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the &quot;Event Sounds&quot; option in the Sound settings is supposed to disable this sound but it doesn't seem to work. I've opened an issue here: &lt;a href=&quot;https://github.com/elementary/files/issues/766&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/766&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an ugly work around, you could delete or change the name of the file that creates that sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example to stop the trash sound from playing:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;strong&gt;&lt;code&gt;io.elementary.files-pkexec&lt;/code&gt;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Enter your password&lt;/li&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;L&lt;/kbd&gt; and paste in &lt;code&gt;/usr/share/sounds/freedesktop/stereo/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Delete or rename `trash-empty.oga&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16318" LastEditorUserId="16318" LastEditDate="2019-01-17T20:16:08.587" LastActivityDate="2019-01-17T20:16:08.587" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17043" PostTypeId="2" ParentId="17041" CreationDate="2018-11-12T19:16:38.193" Score="0" Body="&lt;p&gt;I think because the project purpose is not to be exclusive...&#xA;Moreover, having to download software by hand as a user force you to be aware of the necessity of the software you're searching, it does gratify the developpers.&lt;/p&gt;&#xA;" OwnerUserId="16297" LastActivityDate="2018-11-12T19:16:38.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17047" PostTypeId="1" CreationDate="2018-11-13T08:06:09.867" Score="0" ViewCount="190" Body="&lt;p&gt;I've tried amd driver directly and it cause me to have the OS reinstalled.&#xA;Do advice on how i can solve the screen tearing thats going on.&lt;/p&gt;&#xA;" OwnerUserId="16325" LastActivityDate="2024-03-25T07:01:45.170" Title="AMD RX580 Screen Tearing" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17048" PostTypeId="2" ParentId="17041" CreationDate="2018-11-13T09:54:58.877" Score="1" Body="&lt;p&gt;Also, Libreoffice takes a lot of space. This contributes to making the iso smaller.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-13T09:54:58.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17049" PostTypeId="2" ParentId="16595" CreationDate="2018-11-13T13:46:07.487" Score="0" Body="&lt;p&gt;Same problem :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, full screen on any browser (Firefox or Chrome) gets the image stuck, sound continues as normal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only solution is to move the fullscreen window to the laptop desktop, and then move the fullscreen video back to the widescreen monitor using keyboard shortcuts. That seems to work. The source of the video doesn't seem to matter (youtube, or other).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Haven't had that problem with the previous version of Elementary, only with Juno; and no, &lt;code&gt;apt-get upgrade&lt;/code&gt; hasn't helped.&lt;/p&gt;&#xA;" OwnerUserId="16328" LastActivityDate="2018-11-13T13:46:07.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17051" PostTypeId="1" AcceptedAnswerId="17060" CreationDate="2018-11-13T16:30:23.063" Score="0" ViewCount="274" Body="&lt;p&gt;so i was trying to install elementary OS Juno on my laptop Lenovo ideapad Y700-15 isk and i had problems with Grub installation after whole process which made me unable to boot up eOS. I had same problem when i was trying to install Ubuntu. I got two drives, ssd with windows 10 on it and hdd where i made a partition for elementary OS only in ext4 format on which i tried to install eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help :)&lt;/p&gt;&#xA;" OwnerUserId="16334" LastActivityDate="2020-04-07T10:00:55.237" Title="Problem with installing Grub, after eOS installation." Tags="|dual-boot|grub|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17053" PostTypeId="2" ParentId="16091" CreationDate="2018-11-13T19:41:13.553" Score="0" Body="&lt;p&gt;I've had that issue before as well and Javier A's answer usually works for me. There was one time that it didn't and the following command worked:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-13T19:41:13.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17054" PostTypeId="1" AcceptedAnswerId="17057" CreationDate="2018-11-13T19:51:13.173" Score="0" ViewCount="725" Body="&lt;p&gt;When i try to &lt;code&gt;sudo apt update&lt;/code&gt;, i get the following error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E: Release file for&#xA;  &lt;a href=&quot;http://packages.elementary.io/appcenter/dists/bionic/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter/dists/bionic/InRelease&lt;/a&gt; is not&#xA;  valid yet (invalid for another 50min 7s). Updates for this repository&#xA;  will not be applied. E: Release file for&#xA;  &lt;a href=&quot;http://security.ubuntu.com/ubuntu/dists/bionic-security/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/dists/bionic-security/InRelease&lt;/a&gt; is&#xA;  not valid yet (invalid for another 8min 17s). Updates for this&#xA;  repository will not be applied. E: Release file for&#xA;  &lt;a href=&quot;http://archive.ubuntu.com/ubuntu/dists/bionic-updates/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://archive.ubuntu.com/ubuntu/dists/bionic-updates/InRelease&lt;/a&gt; is not&#xA;  valid yet (invalid for another 44min 6s). Updates for this repository&#xA;  will not be applied.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Any idea how to solve this?&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-13T20:28:29.083" Title="Error in repository" Tags="|updates|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17057" PostTypeId="2" ParentId="17054" CreationDate="2018-11-13T20:28:29.083" Score="2" Body="&lt;p&gt;Ok, found the culprit.&#xA;Just noticed my clock was wrong.&#xA;Now everything is working again...&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-13T20:28:29.083" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17058" PostTypeId="1" AcceptedAnswerId="17111" CreationDate="2018-11-13T22:18:10.410" Score="0" ViewCount="380" Body="&lt;p&gt;I bought a new Dell at bestbuy with the reason on learning/using Linux and found that when I boot to the USB and Try the OS is works for a few seconds and freezes the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install and the same thing happens as soon as its in the install process about 2 parts in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are error messages I managed to get on the boot screen that I need help figuring out a resolution to and a successful install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my PC (currently Win 10 Home)&#xA;AMD A6 9220e Radeon R4 1.6 GHz&#xA;4 GB MEMORY&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.bestbuy.com/site/reviews/dell-inspiron-11-6-laptop-amd-a6-4gb-memory-32gb-emmc-flash-memory-gray/6188326&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bestbuy.com/site/reviews/dell-inspiron-11-6-laptop-amd-a6-4gb-memory-32gb-emmc-flash-memory-gray/6188326&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    0.042676] [Firmware Bug]: cpu 0, invalid threshold interrupt offset 1 for b&#xA;ank 4, block 0 (MSR00000413=0xd00000000100000)&#xA;[    1.894345] couldn't get size: 0x800000000000000e&#xA;[    1.894345] MODSIGN: Couldn't get UEFI db list&#xA;[    2.931843] [drm:construct [amdgpu] *ERROR* construct: Invalid Connector Obj&#xA;ectID from Adapter Service for connector index:21&#xA;[    4.144382] [drm:hwss_wait_for_blank_complete [amdgpu]] *ERROR* DC: failed to &#xA;blank crtc!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="16341" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:01.953" LastActivityDate="2018-12-05T23:45:01.953" Title="Juno 5.0 install / Try it option freezes with boot errors on dell i3180" Tags="|system-installation|release-juno|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17059" PostTypeId="2" ParentId="16937" CreationDate="2018-11-14T00:30:54.690" Score="0" Body="&lt;p&gt;I found a solution, thought I'm not sure why it worked.&#xA;When I switched from RAID to AHCI, I was able to boot eOS on my usb, then install it. After switching back to RAID, I was able to access both Windows and elementary open booting from the Grub menu and they both work.&lt;/p&gt;&#xA;" OwnerUserId="16233" LastActivityDate="2018-11-14T00:30:54.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17060" PostTypeId="2" ParentId="17051" CreationDate="2018-11-14T01:40:24.483" Score="0" Body="&lt;p&gt;I was in similar situation. try to install juno/win 10 in same SSD, no matter how I try(different layout/format), all failed in grub installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but use 'full disk' installation is always OK.&lt;/p&gt;&#xA;" OwnerUserId="9438" LastActivityDate="2018-11-14T01:40:24.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17062" PostTypeId="2" ParentId="2097" CreationDate="2018-11-14T05:27:33.823" Score="1" Body="&lt;p&gt;I know it is an old thread but for someone who is looking for more answers as I did:&#xA;I have self hosting Nextcloud instance on Apache using Raspberry Pi 3 and I have generated self-signed certificate for it. The eOS calendar refused to connect at all. I had to generate the certificate through Let’s Encrypt and now it’s working flawlessly.&lt;/p&gt;&#xA;" OwnerUserId="16342" LastActivityDate="2018-11-14T05:27:33.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17065" PostTypeId="2" ParentId="16975" CreationDate="2018-11-14T09:42:06.957" Score="0" Body="&lt;p&gt;Try the following: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install App-editor and in each one of those apps, try to search for the icon (in available icons, not manually). This way you can see if the icons are installed in the system. If the icon is available, select it and save each time. That should solve it.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-14T09:42:06.957" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17066" PostTypeId="2" ParentId="17023" CreationDate="2018-11-14T14:19:54.937" Score="1" Body="&lt;p&gt;It looks like &lt;code&gt;AppCentre&lt;/code&gt; can't handle that kind of user interaction&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That message was a normal user interaction asking if you accept the change from &lt;code&gt;Google Inc&lt;/code&gt; to &lt;code&gt;Google LLC&lt;/code&gt; in the repo's config&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone using &lt;code&gt;apt&lt;/code&gt; through terminal could answer that without any issue but if the GUI, in this case &lt;code&gt;AppCentre&lt;/code&gt;, wasn't able to and by default treated like an error you see that message. A wrong message because was not an error, the error is on &lt;code&gt;AppCentre&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To continue without that message, open a terminal and use this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;there you'll be asked the question I told you above (Yes/No question).&#xA;Answer &lt;code&gt;Yes&lt;/code&gt; and then you can continue using &lt;code&gt;AppCentre&lt;/code&gt; as usual&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There's no need to remove Google's repo, there's no problem there. Also because this isn't an error you can install Chrome back safely if you want/need&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also recommend you to report the error on &lt;code&gt;AppCentre&lt;/code&gt;'s Github page&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/appcenter/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-14T14:19:54.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17067" PostTypeId="1" CreationDate="2018-11-14T15:50:14.427" Score="0" ViewCount="613" Body="&lt;p&gt;All windows are not displaying context menu when right clicked on theirs title bar.&#xA;This used to work with a fresh install but it's not working any more on 2 recent installations.&#xA;I do not know what caused the problem and I do not intend to remove all installed programs (or to reinstall Juno) to find out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any pointers would be a big help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is related to a &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7655/no-context-menu-when-right-clicked-applications-title-bar&quot;&gt;Loki issue&lt;/a&gt; but not the same, at it is for all applications and all users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;EDIT 29 Nov:&lt;/em&gt;&lt;/strong&gt;&#xA;I am not looking for a way to minimize the window: I can do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want the &lt;em&gt;title bar menu&lt;/em&gt; as it provides a menu to choose on which workspace the windows is to be displayed: one particular workspace or all workspaces.&lt;/p&gt;&#xA;" OwnerUserId="2329" LastEditorUserId="14940" LastEditDate="2018-12-31T16:21:55.720" LastActivityDate="2020-04-20T07:05:53.043" Title="Juno: no right click menu on title bar" Tags="|release-juno|context-menu|title-bar|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17068" PostTypeId="1" CreationDate="2018-11-14T17:55:33.650" Score="0" ViewCount="182" Body="&lt;p&gt;I paid and then downloaded &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; to my laptop that is running &lt;a href=&quot;/questions/tagged/release-loki&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-loki&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-loki&lt;/a&gt;. However I can't seem to install the ISO file.  Can someone tell me how to either burn the ISO file to DVD or CD on my laptop or how to mount the image file as a CDROM in order to execute. The file seems to be too big to move to a PC or MAC.&lt;/p&gt;&#xA;" OwnerUserId="16347" LastEditorUserId="26" LastEditDate="2018-12-06T00:09:41.270" LastActivityDate="2018-12-06T00:09:41.270" Title="Install elementary OS 5.0 Juno on my elementary OS 0.4 Loki" Tags="|system-installation|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-06T00:10:02.917" ContentLicense="CC BY-SA 4.0" />
  <row Id="17069" PostTypeId="2" ParentId="17068" CreationDate="2018-11-14T19:15:54.047" Score="1" Body="&lt;p&gt;You only need to follow the &lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation instructions from the website&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="26" LastEditDate="2018-12-06T00:04:28.087" LastActivityDate="2018-12-06T00:04:28.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17070" PostTypeId="2" ParentId="17067" CreationDate="2018-11-14T19:27:27.657" Score="1" Body="&lt;p&gt;elementaryOS AFAIK never had that menu, in fact in elementaryOS there's no minimize concept in the system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Probably you can see that menu in some non eOS-apps but isn't part of the environment&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The link you provided is a guy who said what I said now, he wanted eOS desktop and apps to run like Gnome apps. My question is why he installed eOS and not a Gnome based system?.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He then talked about Nautilus, in eOS we have Pantheon not Nautilus. He also talked about Gnome-Terminal, again eOS don't come with Gnome, it uses GTK libaries but isn't Gnome.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-14T19:32:47.347" LastActivityDate="2018-11-14T19:32:47.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17071" PostTypeId="1" AcceptedAnswerId="17072" CreationDate="2018-11-14T19:56:01.710" Score="0" ViewCount="623" Body="&lt;p&gt;I have Elementary OS Juno and I wanted to change the scale because all was too little. So I went to &quot;Display&quot; in settings and I double pixels. but now, it's too big and when I try to go back with &quot;automatic&quot; or &quot;little DPI&quot; (I'm not sure about the translation, I have the french version of eOS), the scale down but it's too big.&#xA;I tried :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set org.gnome.desktop.interface scaling-factor 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but nothing change, and when I get scaling factor, it's 1. How can I down the scale ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note : It's on my laptop, a 1980x1080.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note 2 : When I connect my laptop to an external screen (1980x1080), all is good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me,&#xA;thanks !&lt;/p&gt;&#xA;" OwnerUserId="16351" LastEditorUserId="14940" LastEditDate="2018-12-31T16:23:25.037" LastActivityDate="2018-12-31T16:23:25.037" Title="eOS Juno : Scale at 1 but display too big yet" Tags="|release-juno|gtk|" AnswerCount="1" CommentCount="0" ClosedDate="2018-11-30T19:58:00.437" ContentLicense="CC BY-SA 4.0" />
  <row Id="17072" PostTypeId="2" ParentId="17071" CreationDate="2018-11-14T21:51:22.590" Score="0" Body="&lt;p&gt;I had the same problem. I solved it by leaving the scaling factor at default value and increased font size with &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-tweaks&lt;/a&gt;. Gnome (GTK) has some problems with fractional scaling, so things are either too big or too small.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bear in mind that some apps may still look really big, or small. Especially QT or Java apps.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="15844" LastEditDate="2018-11-14T22:05:43.993" LastActivityDate="2018-11-14T22:05:43.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17075" PostTypeId="2" ParentId="14496" CreationDate="2018-11-15T02:56:51.660" Score="0" Body="&lt;p&gt;I recommend to avoid using &lt;code&gt;AppCentre&lt;/code&gt; and if you can use the terminal use the commands &lt;code&gt;Stuart&lt;/code&gt; told you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;: Updates the local library of packages from the repositories&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt upgrade&lt;/code&gt;: Upgrades installed packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt dist-upgrade&lt;/code&gt;: Upgrades installed packages and also if needed can remove and install new ones if the upgrade requires it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install &amp;lt;package&amp;gt;&lt;/code&gt;: installs a &lt;code&gt;&amp;lt;package&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt search &amp;lt;package&amp;gt;&lt;/code&gt;: search a &lt;code&gt;&amp;lt;package&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case I use the terminal+apt to update/upgrade/install... and only &lt;code&gt;AppCentre&lt;/code&gt; to install eOS-apps like &lt;code&gt;AppEditor&lt;/code&gt; (useful tool to edit/add shortcuts in the main menu)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also is always better to know how to work with the terminal in Linux, you can avoid a lot of problems just using it and also you can add some third party repositories or PPAs. Through them you can get the latest Firefox, Google Chrome, Google Earth, plexmediaserver, Kodi, etc&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;There's another GUI for apt, which is not as user oriented as &lt;code&gt;AppCentre&lt;/code&gt; but better than typing. It's called &lt;code&gt;Synaptic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install synaptic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uZCaP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uZCaP.png&quot; alt=&quot;synaptic main window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-15T02:56:51.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17076" PostTypeId="2" ParentId="14056" CreationDate="2018-11-15T03:06:08.030" Score="0" Body="&lt;p&gt;What does not work: MicroSD card slot, Two front-facing speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What works with issues: USB-C with a USB hub plugged in (the ethernet is wonky, then again might not be the laptop's fault).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should you do after installing eOS on this: Install TLP and powertop. Else your power and temperature will suffer.&lt;/p&gt;&#xA;" OwnerUserId="9152" LastActivityDate="2018-11-15T03:06:08.030" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17077" PostTypeId="2" ParentId="15913" CreationDate="2018-11-15T10:30:04.373" Score="0" Body="&lt;p&gt;I posted this question for the Juno Beta, a little annoyed I had to search for a network LAN cable to finish the install - again - that the problem is still not solved in the stable Juno version. Anyway: here's the comprehensive fix to this issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I fixed it: wifi adapter is a Broadcom BCM4313. First I disabled it in Software Center -&gt; Edit -&gt; Software Sources -&gt; Additional Drivers. Then I used&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to get rid of the driver. And&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install b43-fwcutter firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after underbroken install&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get update --fix-missing&#xA;sudo dpkg -configure -a&#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if not working&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge b43-fwcutter firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and redo the above to install a new one. After a reboot it worked again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However please note that installing Synaptic package manager brought to my attention that there's a legacy driver that can be installed as well, for on my MBP6,1 the driver isn't working satisfyingly on a permanent basis: it bugs in the following way: the wifi signal indicator indicates no signal, another wifi appears selected than the one I'm connected to, and the connection interrupts. A simple cutting and then reinstating the connection from the wireless menu solves the problem for a short while (a minute or so) and then it restarts. Installing the legacy driver through Synaptic seems to solve the problem. The package name is: &lt;code&gt;firmware-b43-legacy-installer&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="26" LastEditDate="2018-11-30T20:25:37.140" LastActivityDate="2018-11-30T20:25:37.140" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17079" PostTypeId="2" ParentId="12692" CreationDate="2018-11-15T15:34:48.363" Score="0" Body="&lt;p&gt;I don't know why did you used an sh package and not the PPA available who can work with the package manager you have&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just use apt&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/myHGh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/myHGh.png&quot; alt=&quot;DrRacket PPA&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://download.racket-lang.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.racket-lang.org/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~plt/+archive/ubuntu/racket&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~plt/+archive/ubuntu/racket&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:plt/racket&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install racket&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gCdwC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gCdwC.png&quot; alt=&quot;DrRacket Main Window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-15T15:34:48.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17080" PostTypeId="2" ParentId="17007" CreationDate="2018-11-15T17:43:07.023" Score="0" Body="&lt;p&gt;I wanted to confirm that I have the same problem and will attempt to answer any questions about the issue as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installation appears to go smoothly at first.&#xA;The desktop login shows up but the Parallels installation assistant keeps spinning.&#xA;If you wait you will eventually see a black screen briefly that says:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Parallels Guest Tools were installed sucessfully! Please, reboot your&#xA;  OS to finish the installation of Parallels Guest Tools. mv: cannot&#xA;  stat '/opt/prl-tools-installer/S&lt;em&gt;gdm' : No such file or directory mv:&#xA;  cannot stat '/opt/prl-tools-installer/S&lt;/em&gt;kdm' : No such file or&#xA;  directory&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then the VM restarts and you see the Elementary OS logo.&#xA;Then you get the black screen with only the top right icons.&#xA;Then icons respond to clicks and you can Restart and Shutdown using that icon.&#xA;But the system is not functioning correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details of my hardware and software:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;MacBook Pro (13-inch, Mid 2012)&lt;/li&gt;&#xA;&lt;li&gt;macOS Mojave 10.14&lt;/li&gt;&#xA;&lt;li&gt;Parallels Desktop 13.3.2 (43368) for Mac Home Edition&lt;/li&gt;&#xA;&lt;li&gt;Attempted to install Elementary OS 5.0-stable.20181016&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16357" LastActivityDate="2018-11-15T17:43:07.023" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17081" PostTypeId="1" AcceptedAnswerId="17156" CreationDate="2018-11-15T20:08:10.457" Score="3" ViewCount="1356" Body="&lt;p&gt;I really like gnome-calendar but synchronization doesn't seem to work on elementary OS. When I try to add a calendar from google, the online accounts dialogue looks broken and clicking &quot;Google&quot; doesn't do anything. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Tb2CB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tb2CB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing gnome-online-accounts seem to solve part of the problem. The dialogue is fixed but now the next window is the one with no controls. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gel2R.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gel2R.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried to install it via snap and it didn't work. Failing with error message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Gtk-Message: 17:05:49.031: Failed to load module&#xA;  &quot;pantheon-filechooser-module&quot; Failed to register:&#xA;  GDBus.Error:org.freedesktop.DBus.Error.AccessDenied: An AppArmor&#xA;  policy prevents this sender from sending this message to this&#xA;  recipient; type=&quot;method_call&quot;, sender=&quot;:1.466&quot; (uid=1000 pid=3972&#xA;  comm=&quot;gnome-calendar &quot; label=&quot;snap.gnome-calendar.gnome-calendar&#xA;  (enforce)&quot;) interface=&quot;org.gtk.Actions&quot; member=&quot;DescribeAll&quot; error&#xA;  name=&quot;(unset)&quot; requested_reply=&quot;0&quot; destination=&quot;org.gnome.Calendar&quot;&#xA;  (uid=1000 pid=24275 comm=&quot;/usr/bin/gnome-calendar&#xA;  --gapplication-service &quot; label=&quot;unconfined&quot;)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Is there a step by step guide for getting it to work?&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2019-01-19T15:57:23.090" Title="Sync GNOME Calendar on elementary OS" Tags="|calendar|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17082" PostTypeId="1" AcceptedAnswerId="17086" CreationDate="2018-11-15T20:15:55.207" Score="2" ViewCount="816" Body="&lt;p&gt;has anyone personally faced instability in elementaryOS 5 with two screens in extended mode when opening videos in any browser in full screen mode? I open a video in full screen on one of the screens, whatever the video hangs, the browser stops responding, no matter what the browser, I also changed the computer but I kept both screen and the problem persists, I performed an installation clean and just installed the google chrome and mozilla browser.I found post on the stack with replies to use the upgrade and download the packages for fix, but my problem persists anyone got a solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15561/google-chrome-stuck-when-watching-video-at-full-screen-size&quot;&gt;StackExASk Solution 1&lt;/a&gt;&#xA;Not Worked&lt;/p&gt;&#xA;" OwnerUserId="16360" LastEditorUserId="14940" LastEditDate="2018-11-16T02:13:11.417" LastActivityDate="2018-11-16T02:13:11.417" Title="Instability in full screen videos ElementaryOs 5" Tags="|release-juno|videos|elementary-project|xorg|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17083" PostTypeId="1" AcceptedAnswerId="17089" CreationDate="2018-11-15T20:48:21.490" Score="1" ViewCount="369" Body="&lt;p&gt;I can't get the icon for Eclipse to display, although the exec link is present in the Applications menu and Plank, after checking instructions &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4241/how-can-i-add-eclipse-ide-to-the-applications-menu-and-dock&quot;&gt;here&lt;/a&gt; but it won't display the icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have created an &quot;EclipseIDE.desktop&quot; file using nano in /home/user/.local/applications/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Contents as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Type=Application&#xA;Name=EclipseIDE&#xA;Comment=Eclipse Integrated Development Environment&#xA;Icon=/usr/share/pixmaps/eclipse.xpm&#xA;Exec=/opt/eclipse/eclipse&#xA;Terminal=false&#xA;Categories=Development;IDE;Java;&#xA;StartupWMClass=Eclipse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have eclipse's icon copied in both locations cp /opt/eclipse/icon.xpm /usr/share/pixmaps/eclipse.xpm&#xA;but the icon won't display either in Applications menu or Plank&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="14940" LastEditDate="2018-11-30T20:07:37.080" LastActivityDate="2018-11-30T20:07:37.080" Title="ElementaryOS Juno after Eclipse IDE install impossible to add icon after linked in Application menu and Plank" Tags="|release-juno|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17085" PostTypeId="2" ParentId="16746" CreationDate="2018-11-15T23:53:16.157" Score="3" Body="&lt;p&gt;This is a known issue with a small number of apps that explicitly request window decorations, and is being tracked at &lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/244&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2018-11-15T23:53:16.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17086" PostTypeId="2" ParentId="17082" CreationDate="2018-11-16T01:18:31.180" Score="2" Body="&lt;p&gt;Check my answer here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/16901/14940&quot;&gt;https://elementaryos.stackexchange.com/a/16901/14940&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is only a bypass but still a way to see fullscreen videos while isn't fixed&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-16T01:18:31.180" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17087" PostTypeId="1" CreationDate="2018-11-16T02:07:00.593" Score="1" ViewCount="90" Body="&lt;p&gt;I'm using Code to view and edit tab separated files, composed by long entries. When Code breaks the lines, it messes with my view of the file. How can I turn off text wrapping?&lt;/p&gt;&#xA;" OwnerUserId="16363" LastActivityDate="2018-12-05T10:04:21.900" Title="How to toggle text wrapping in Code?" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17089" PostTypeId="2" ParentId="17083" CreationDate="2018-11-16T06:50:58.653" Score="2" Body="&lt;p&gt;I don't know about &lt;code&gt;Eclipse&lt;/code&gt; but I recommend to install &lt;code&gt;AppEditor&lt;/code&gt; from &lt;code&gt;AppCentre&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is a simple tool to edit/create menu shortcuts&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lzpk5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lzpk5.png&quot; alt=&quot;appeditor main window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Anyway I just installed Eclipse via &lt;code&gt;snap&lt;/code&gt; and the icon is OK, for that kind of app I recommend have the latest and snap (in this case) is the easiest and best way to get it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/eclipse&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/eclipse&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-16T06:50:58.653" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17090" PostTypeId="2" ParentId="17083" CreationDate="2018-11-16T07:25:47.443" Score="1" Body="&lt;p&gt;When it comes to the eclipse.desktop file, here's how it has been edited by AppEditor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Desktop Entry]&lt;br&gt;&#xA;Encoding=UTF-8&lt;br&gt;&#xA;Type=Application&lt;br&gt;&#xA;Name=EclipseIDE&lt;br&gt;&#xA;Comment=Eclipse Integrated Development Environment&lt;br&gt;&#xA;Icon=/opt/eclipse/icon.xpm&lt;br&gt;&#xA;Exec=/opt/eclipse/eclipse&lt;br&gt;&#xA;Terminal=false&#xA;Categories=IDE;Java;Development;&lt;br&gt;&#xA;StartupWMClass=Eclipse&lt;br&gt;&#xA;Name[en_IL]=EclipseIDE&lt;br&gt;&#xA;X-GNOME-FullName[en_IL]=EclipseIDE&lt;br&gt;&#xA;Comment[en_IL]=Eclipse Integrated Development Environment &#xA;NoDisplay=false&lt;br&gt;&#xA;Path=&lt;br&gt;&#xA;X-GNOME-UsesNotifications=false&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All in one text block without interline space; Icon= / Exec= have to be edited with your path for the icon and the exec file that starts Eclipse, respectively.&#xA;Normally these are located in /opt/eclipse/&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2018-11-16T07:37:19.417" LastActivityDate="2018-11-16T07:37:19.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17093" PostTypeId="2" ParentId="17040" CreationDate="2018-11-16T12:23:00.030" Score="1" Body="&lt;p&gt;Please raise an issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;.  I agree Files should at least honor the event sounds setting.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-11-16T12:23:00.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17094" PostTypeId="2" ParentId="17007" CreationDate="2018-11-16T14:28:34.133" Score="2" Body="&lt;p&gt;That's probably a bug in nouveau driver introduced in kernel 4.15. It's still not fixed in 4.19 release.&#xA;Loki was on 4.14 which is working good.&#xA;See this: &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=106512&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.freedesktop.org/show_bug.cgi?id=106512&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you specify which GPU exactly do you have?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you boot with nomodeset kernel parameter?&#xA;See: &lt;a href=&quot;https://askubuntu.com/questions/38780/how-do-i-set-nomodeset-after-ive-already-installed-ubuntu&quot;&gt;https://askubuntu.com/questions/38780/how-do-i-set-nomodeset-after-ive-already-installed-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are several workarounds:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To achieve these workarounds you'll have to boot with nomodeset kernel parameter.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Build and patch kernel with provided patch from source.&#xA;How To: &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/BuildYourOwnKernel&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have did it so If you wan't use nouveau, don't want to compile it by yourself and are ok with mine .deb binaries of patched kernel 4.15 I can upload them. Ask me If you are interessted. I recommend to do it by yourself.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Use nvidia's proprietary driver. Unfortunately the one in ubuntu repos is also bugged and you have to install official one manually which works without issues:&#xA;How To: &lt;a href=&quot;https://github.com/elementary/greeter/issues/166#issuecomment-437144185&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/issues/166#issuecomment-437144185&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you will be using nvidia-340 then you will be probably interessted also in this issue: &lt;a href=&quot;https://github.com/elementary/gala/issues/253&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/253&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Downgrade kernel to 4.14&#xA;&lt;a href=&quot;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.14/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.14/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16372" LastEditorUserId="16372" LastEditDate="2018-11-16T14:50:10.540" LastActivityDate="2018-11-16T14:50:10.540" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17095" PostTypeId="2" ParentId="17087" CreationDate="2018-11-16T14:47:19.937" Score="3" Body="&lt;p&gt;This is currently not possible. The feature was removed in this PR: &lt;a href=&quot;https://github.com/elementary/code/pull/73&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/pull/73&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After feedback, I think it was agreed to bring it back (discussion &lt;a href=&quot;https://github.com/elementary/code/issues/484&quot; rel=&quot;nofollow noreferrer&quot;&gt;here)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just submitted the necessary code changes to bring it back &lt;a href=&quot;https://github.com/elementary/code/pull/587&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; so hopefully it will make it into the next update of Code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: This option has now been restored.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2018-12-05T10:04:21.900" LastActivityDate="2018-12-05T10:04:21.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17096" PostTypeId="1" CreationDate="2018-11-16T17:22:28.880" Score="2" ViewCount="1038" Body="&lt;p&gt;I have tried to add the repo for Brave Browser. It adds fine, but then I get this problem with it being insecure. How can I add this repo to an exceptions list? I understand apt is going to phase out using unauthenticated repos, but I have tried using the --allow-unauthenticated switch.&lt;/p&gt;&#xA;" OwnerUserId="16376" LastEditorUserId="14940" LastEditDate="2018-11-30T19:58:45.690" LastActivityDate="2018-11-30T19:58:45.690" Title="Brave Browser and repo update" Tags="|apt|thirdpartyapps|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17097" PostTypeId="2" ParentId="17096" CreationDate="2018-11-16T20:46:24.003" Score="1" Body="&lt;p&gt;I had the same error message as Andy when trying to install Brave via apt-get (using the same instructions on the Brave browser website)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GcdK3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GcdK3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My workaround was to install the Brave snap package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install brave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The Brave icon will be available in the menu after rebooting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But as far as authorizing that repo...I have no idea.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-16T21:25:50.603" LastActivityDate="2018-11-16T21:25:50.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17098" PostTypeId="1" CreationDate="2018-11-16T22:11:35.860" Score="1" ViewCount="572" Body="&lt;p&gt;Neither &lt;code&gt;Gparted&lt;/code&gt; nor &lt;code&gt;Gnome Disk Utility&lt;/code&gt; let me format a USB Drive. I don't no when this started, because a few weeks ago everything worked just fine. Now &lt;code&gt;Gnome Disk Utility&lt;/code&gt; just throws an error &lt;code&gt;Error synchronizing after initial wipe: Timed out waiting for object (udisks-error-quark, 0)&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use &lt;code&gt;dd if=/dev/zero of=/dev/sdb&lt;/code&gt; to clear out the drive I can format it, but then I appears to be owned by &lt;code&gt;root&lt;/code&gt; and i can't change the permissions either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Somebody got an idea how this comes or how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I still got the same problem and have tried nearly everything I could come up with or find elsewhere. If I plug in any usb drive it automounts, but i can't access it without &lt;code&gt;root&lt;/code&gt; privileges. I tried to change the ownership with &lt;code&gt;chown&lt;/code&gt;, but it only gives me &lt;code&gt;Operation not permitted&lt;/code&gt; as an error.&lt;/p&gt;&#xA;" OwnerUserId="15563" LastEditorUserId="14940" LastEditDate="2018-12-28T13:49:50.663" LastActivityDate="2018-12-28T13:49:50.663" Title="Unabled to format USB Drive" Tags="|release-juno|usb-drive|disk-management|filesystem|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17099" PostTypeId="2" ParentId="17098" CreationDate="2018-11-16T22:31:13.287" Score="1" Body="&lt;p&gt;Follow this, might work (Gparted):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/377396/890782&quot;&gt;https://askubuntu.com/a/377396/890782&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Also from Debian's launchpad report (link below)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You can work around this bug in gnome-disk-utility using these steps:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;After selecting the SD card, instead of clicking the gear icon to format,&#xA;    click the partition in the &quot;Volumes&quot; section.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Delete the partition (&quot;minus&quot; icon)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Create a new partition&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Is a really old bug you have there&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/debian/+source/util-linux/+bug/1059872&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/debian/+source/util-linux/+bug/1059872&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-16T23:33:24.010" LastActivityDate="2018-11-16T23:33:24.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17100" PostTypeId="2" ParentId="17098" CreationDate="2018-11-16T23:53:52.643" Score="1" Body="&lt;p&gt;There is an app on AppCenter, Formatter, which might become useful. Try this.&lt;/p&gt;&#xA;" OwnerUserId="16379" LastActivityDate="2018-11-16T23:53:52.643" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17101" PostTypeId="1" CreationDate="2018-11-17T02:41:38.340" Score="7" ViewCount="1723" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hcnbq.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hcnbq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an annoying issue with Firefox and epiphany when I right click on a link to open it in a new tab, it does not give me the chance to click it, it clicks by it self I have to hold the right click to select what I want, some times it goes back to normal and I just right click and the menu stays there but most of the time I have this problem the menu just clicks on the first thing it hovers over in the menu . idk what to do anymore &lt;/p&gt;&#xA;" OwnerUserId="16380" LastEditorUserId="14940" LastEditDate="2018-11-30T20:07:39.723" LastActivityDate="2020-06-18T13:40:46.720" Title="mouse right click double clicks?" Tags="|release-juno|firefox|epiphany|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17102" PostTypeId="1" CreationDate="2018-11-17T03:28:03.840" Score="2" ViewCount="1130" Body="&lt;p&gt;I have another problem but with the code editor this time it does not let me create a new tab &#xA;&lt;a href=&quot;https://i.stack.imgur.com/kgYXR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kgYXR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;even when I right click and click new tab nothing happens I tried uninstalling it and installing it again but the problem is still there I can't write anything literally &#xA;&lt;a href=&quot;https://i.stack.imgur.com/apdaP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/apdaP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16380" LastEditorUserId="14940" LastEditDate="2018-12-31T16:23:52.123" LastActivityDate="2020-04-27T23:07:31.697" Title="code text editor problem in elementary os juno" Tags="|release-juno|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17103" PostTypeId="2" ParentId="16717" CreationDate="2018-11-17T05:00:05.663" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/abiosoft/autoplank/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/abiosoft/autoplank/blob/master/README.md&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Haven't tried it but seems to help automate it without having to run those commands&lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2018-11-17T05:00:05.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17104" PostTypeId="2" ParentId="17102" CreationDate="2018-11-17T05:24:35.047" Score="2" Body="&lt;p&gt;I think this is the solution for your problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1241/cant-open-a-new-tab-or-new-file-on-scratch&quot;&gt;Can&amp;#39;t open a new tab or new file on scratch&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;To fix this issue:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;Make sure you don't have any unsaved files in Scratch when run as root (with the sudo command). This fix will delete those files.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Open Terminal and use root permissions to remove the directory.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo rm -rf ~/.local/share/scratch-text-editor&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Open Scratch as your own user (do not use the sudo command)&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Scratch is the old name of Code&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With Code the command should be: &lt;code&gt;sudo rm -rf ~/.local/share/io.elementary.code&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-17T07:10:54.350" LastActivityDate="2018-11-17T07:10:54.350" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17105" PostTypeId="2" ParentId="373" CreationDate="2018-11-17T05:27:23.297" Score="1" Body="&lt;p&gt;There are several changes made on the system, so on Elementary 5 Juno you need a bit different approach.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install gedit from AppCenter&lt;/li&gt;&#xA;&lt;li&gt;Open Terminal and paste code below&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gedit admin:///etc/lightdm/io.elementary.greeter.conf&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;gedit admin:// - opens and edits file as root, just add path to your file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;add &lt;strong&gt;activate-numlock=true&lt;/strong&gt; if missing or &lt;strong&gt;remove #&lt;/strong&gt; if #activate-numlock=true exits.&lt;/p&gt;&#xA;" OwnerUserId="16379" LastEditorUserId="16379" LastEditDate="2018-11-17T11:52:42.847" LastActivityDate="2018-11-17T11:52:42.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17106" PostTypeId="2" ParentId="17101" CreationDate="2018-11-17T08:38:27.387" Score="8" Body="&lt;p&gt;For the right-click mouse fix of Firefox, type in the search bar &lt;code&gt;about:config&lt;/code&gt; and change &lt;code&gt;ui.context_menus.after_mouseup&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="-1" LastEditDate="2020-06-18T13:40:46.720" LastActivityDate="2020-06-18T13:40:46.720" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17107" PostTypeId="1" CreationDate="2018-11-17T09:08:43.753" Score="1" ViewCount="55" Body="&lt;p&gt;I have an old white iMac Core Duo and its running MacOS Lion.  It wont allow me to boot of the USB or Disc that have the Elementary OS 5 Flashed/Burned on them.  I have tried both the USB and DISC method and once burned to USB or DISC is not recognisable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used the Etcher software to flash the USB but its then unreadable.&#xA;I have right clicked the ISO and selected Burn to Disc and again once done its not recognisable by my iMac Pro or old White iMac Core Duo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No idea what I am doing wrong?? Help!!  Please.&lt;/p&gt;&#xA;" OwnerUserId="16382" LastActivityDate="2018-11-21T00:10:40.330" Title="The disk you inserted was not readable by this computer" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17109" PostTypeId="2" ParentId="16806" CreationDate="2018-11-17T10:17:40.567" Score="0" Body="&lt;p&gt;The only thing that helped was reinstalling the eOS and checking &quot;I don't want to connect to a wifi network right now&quot;. This way the buggy/incompatible network drivers were not downloaded nor installed. &#xA;OT: The additional problem that I had was with AppCenter not being able to connect to the Internet I resolved by reinstalling the eOS &lt;em&gt;again&lt;/em&gt; and only allowing the updates for the system to be updated (I did not allow the AppCenter to update first). Waaaay disappointed with eOS. &lt;/p&gt;&#xA;" OwnerUserId="16144" LastActivityDate="2018-11-17T10:17:40.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17111" PostTypeId="2" ParentId="17058" CreationDate="2018-11-17T12:37:59.137" Score="0" Body="&lt;p&gt;So just in case someone else was in the same boat I finally installed elementry os succesfully and its working great! I decided to update the bios on a hunch and turned off all secure, tpm and ueif boot options then boot only in f12 legacy to usb. I took a few tries as the installer froze but it finaly took.&lt;/p&gt;&#xA;" OwnerUserId="16341" LastActivityDate="2018-11-17T12:37:59.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17113" PostTypeId="1" CreationDate="2018-11-17T16:24:41.403" Score="5" ViewCount="991" Body="&lt;p&gt;Is there some way to enable copying text when selecting text via the mouse in the terminal app?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The settings dialog in the terminal app only seems to provide a way to select a theme and font size.&lt;/p&gt;&#xA;" OwnerUserId="16386" LastActivityDate="2020-04-01T11:29:59.623" Title="copy on mouse highlight in terminal app" Tags="|mouse|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17116" PostTypeId="2" ParentId="17113" CreationDate="2018-11-17T17:01:44.937" Score="2" Body="&lt;p&gt;If I understand correctly, you just want to copy text after highlighting it with a mouse. Correct? You should be able to just alternate-click and select copy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bN9OC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bN9OC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;&lt;strong&gt;1)&lt;/strong&gt; A possible solution is to use the middle-button (scroll wheel) copy/paste function. Just highlight the text with your mouse and then click the middle button (scroll wheel). It will paste what you highlighted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; Another possible solution is to install gnome-terminal and then install this patch: &lt;a href=&quot;http://www.taika.org/~tomba/gnome-terminal/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.taika.org/~tomba/gnome-terminal/index.html&lt;/a&gt;&#xA;It should give you the PuTTY like function of copying just by highlighting text. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; Another solution is to use the &lt;code&gt;terminator&lt;/code&gt; terminal. This has the &lt;strong&gt;PuTTY style paste&lt;/strong&gt; option built into it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NwrZT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NwrZT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-29T19:27:25.837" LastActivityDate="2018-11-29T19:27:25.837" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17118" PostTypeId="2" ParentId="16482" CreationDate="2018-11-17T18:09:01.033" Score="1" Body="&lt;p&gt;This is a really good writeup.  I used it twice to update 2 laptops for my family.  The only additional steps I did are:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;take a screenshot of the dock, so you remember what apps were on the dock, and can put icons back in the same order after the update&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get remove wingpanel-indicator-ayatana&lt;/code&gt; when the upgrade is complete&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get remove appstream-data-pantheon-loki*&lt;/code&gt; when the upgrade is complete (2 packages will match and be removed)&lt;/li&gt;&#xA;&lt;li&gt;Select a new desktop background, as the old ones we had from Loki were removed&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16390" LastEditorUserId="26" LastEditDate="2018-12-02T16:39:20.190" LastActivityDate="2018-12-02T16:39:20.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17124" PostTypeId="2" ParentId="16505" CreationDate="2018-11-18T02:33:49.557" Score="2" Body="&lt;p&gt;I've tried writing a script, changing the output, etc but the problem is (I believe) on elementary's terminal not waiting the command to end&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because I've changed the command using cat instead of curl (to test that thought), having curl output the website to a temp text, and got the same result with the command prompt&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also haven't tried another terminal to compare results&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The solution I see could fit as a probable solution, is to write code in C, Python or w/e language you want...compile it and run it.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I've made my first &lt;code&gt;Vala&lt;/code&gt; app just for this :P , I modified an example code with my knowledge of other languages and worked&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/rscm/wttr/blob/master/wttr&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rscm/wttr/blob/master/wttr&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just download the file and it will load the default url wttr.in in a webview. If you call the file with and argument like &lt;code&gt;bydgoszcz&lt;/code&gt; will load that location. I didn't validate any input so don't send weird stuff&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Summary:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;./wttr&lt;/code&gt; is the same as &lt;code&gt;curl wttr.in&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;./wttr bydgoszcz&lt;/code&gt; is the same as &lt;code&gt;curl wttr.in/bydgoszcz&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Tomorrow I'll upload the code in the repo if you want to modify it&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-18T05:04:31.497" LastActivityDate="2018-11-18T05:04:31.497" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17128" PostTypeId="1" CreationDate="2018-11-18T11:00:46.443" Score="1" ViewCount="267" Body="&lt;p&gt;I'm new to Linux and I installed eOS &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; on my HP Spectre x360 yesterday.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everytime I log-in to my account, the Wi-Fi is turned off and I have to toggle the switch. It's on after start-up BEFORE I log in, but after logging in, the airplane mode symbol pops up for a second and Wi-Fi is disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the airplane mode is never on when I check. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a minor problem, but if someone knows how I could fix this, I'd be glad. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16398" LastEditorUserId="14940" LastEditDate="2018-12-05T23:43:52.513" LastActivityDate="2018-12-05T23:44:19.793" Title="elementary OS Juno - Wi-Fi always disabled after logging in" Tags="|release-juno|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17130" PostTypeId="2" ParentId="17096" CreationDate="2018-11-18T15:02:34.730" Score="2" Body="&lt;p&gt;&lt;strong&gt;TLDR:&lt;/strong&gt; Uninstall and remove brave from your source, then run this on the terminal if you are using Juno.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://brave-browser-apt-release.s3.brave.com/brave-core.asc | sudo apt-key add -&#xA;&#xA;echo &quot;deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ bionic main&quot; | sudo tee -a /etc/apt/sources.list.d/brave-browser-release-bionic.list&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install brave-browser brave-keyring&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Why it works&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of nov 2018, official instructions looked like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://brave-browser-apt-release.s3.brave.com/brave-core.asc | sudo apt-key add -&#xA;&#xA;echo &quot;deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ `lsb_release -sc` main&quot; | sudo tee -a /etc/apt/sources.list.d/brave-browser-release-`lsb_release -sc`.list&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install brave-browser brave-keyring&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;lsb_release -sc&lt;/code&gt; prints the current version of the OS, in this case &lt;code&gt;juno&lt;/code&gt;. But that does not make a valid source as brave does not have that url. However, Juno is based on Ubuntu 18, codename &lt;code&gt;bionic&lt;/code&gt;. So we can edit the official instructions to use that as a source.&lt;/p&gt;&#xA;" OwnerUserId="16400" LastActivityDate="2018-11-18T15:02:34.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17131" PostTypeId="2" ParentId="17128" CreationDate="2018-11-18T17:01:47.767" Score="1" Body="&lt;p&gt;Hello do you have tlp installed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If yes go to &lt;code&gt;/etc/default/&lt;/code&gt; and edit file named &lt;code&gt;tlp&lt;/code&gt;&#xA;there is this part:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DEVICES_TO_DISABLE_ON_STARTUP=&quot;bluetooth wifi&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which has wifi in it by default... that may be causing the problem.&lt;/p&gt;&#xA;" OwnerUserId="16402" LastEditorUserId="26" LastEditDate="2018-12-05T23:44:19.793" LastActivityDate="2018-12-05T23:44:19.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17136" PostTypeId="1" AcceptedAnswerId="17170" CreationDate="2018-11-18T20:37:51.693" Score="2" ViewCount="527" Body="&lt;p&gt;Slic3r (&lt;a href=&quot;https://slic3r.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://slic3r.org/&lt;/a&gt;) is the first app I've seen do this on Elementary. Basically it's showing 2 titlebars. Any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When the window is not fullscreen, you can see an application window with some of the desktop wallpaper repeated in it, then a smaller nested application window inside of it&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When the window is fullscreen, the desktop wallpaper duplication issue disappears but there are still 2 titlebars displayed.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9nfZA.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9nfZA.jpg&quot; alt=&quot;Wndowed&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/faWDq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/faWDq.jpg&quot; alt=&quot;Fullscreen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16252" LastActivityDate="2019-05-10T08:45:57.087" Title="Very strange double titlebar" Tags="|applications|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17137" PostTypeId="1" AcceptedAnswerId="17198" CreationDate="2018-11-18T21:18:29.677" Score="0" ViewCount="197" Body="&lt;p&gt;I use the English Dvorak keyboard layout and I'm not able to use &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt;, &lt;kbd&gt;C&lt;/kbd&gt;, or &lt;kbd&gt;V&lt;/kbd&gt; to manipulate files in io.elementary.files &lt;a href=&quot;/questions/tagged/files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;files&amp;#39;&quot; rel=&quot;tag&quot;&gt;files&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hitting the QWERTY equivalents (&lt;kbd&gt;Q&lt;/kbd&gt;/&lt;kbd&gt;J&lt;/kbd&gt;/&lt;kbd&gt;K&lt;/kbd&gt;) does nothing; except &lt;kbd&gt;Q&lt;/kbd&gt; where &lt;kbd&gt;X&lt;/kbd&gt; is, which closes the program like &lt;kbd&gt;Q&lt;/kbd&gt; should. Shortcuts such as &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; to select all files works. &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;L&lt;/kbd&gt; focuses the path bar. I can copy and paste using the Right Click menu. It is only this application which seems to have this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have completed Language Support setup. I have only English (Dvorak) listed in the Keyboard settings and the install was done in Dvorak as well. I'm using a Lenovo Y510p with kernel 4.15.0-39-lowlatency and the problem happens regardless of NVIDIA or Intel setup. I am fully updated as of 2018 Nov 18th 15:16.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Side note: I think I had this problem in &lt;a href=&quot;/questions/tagged/release-loki&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-loki&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-loki&lt;/a&gt; as well, but I wasn't really using elementary OS at the time, so I just moved on.&lt;/p&gt;&#xA;" OwnerUserId="16408" LastEditorUserId="14940" LastEditDate="2018-12-05T23:44:26.573" LastActivityDate="2018-12-05T23:44:26.573" Title="Cannot use CTRL + X/C/V in Files on Dvorak layout" Tags="|pantheon-files|release-juno|keyboard-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17138" PostTypeId="1" CreationDate="2018-11-18T21:24:20.797" Score="2" ViewCount="158" Body="&lt;p&gt;I do not want to write over my Windows OS. Is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I an amateur so ELI5 please... I know what Rufus is, if that helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for reading. &lt;/p&gt;&#xA;" OwnerUserId="16409" LastEditorUserId="16827" LastEditDate="2019-04-19T15:49:57.283" LastActivityDate="2019-04-19T15:50:53.473" Title="installing elementary OS primarily onto a USB while I trial Linux" Tags="|usb|" AnswerCount="1" CommentCount="1" ClosedDate="2019-04-19T15:58:05.430" ContentLicense="CC BY-SA 4.0" />
  <row Id="17141" PostTypeId="2" ParentId="17067" CreationDate="2018-11-18T22:38:14.677" Score="0" Body="&lt;p&gt;The &quot;minimize&quot; concept is quite standard in elementaryOS. Just click the icon in the dock, and active application will minimize to the dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Minimizing a single window from an application (like Pantheon File Manager) needed to be done via right clicking the title bar... But that doesn't work now, so the only remaining option is the keyboard shortcut. (I think the default is &lt;kbd&gt;&amp;#8984;&lt;/kbd&gt; + &lt;kbd&gt;H&lt;/kbd&gt;)&lt;/p&gt;&#xA;" OwnerUserId="16412" LastActivityDate="2018-11-18T22:38:14.677" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17142" PostTypeId="1" AcceptedAnswerId="17143" CreationDate="2018-11-19T00:35:33.807" Score="2" ViewCount="418" Body="&lt;p&gt;I need this program for my work and I installed it with gdebi. I can see the icon but I can't get it to start. The icon goes up and down when I click on it but nothing opens. How can I get it to work? What should I provide you with?&lt;/p&gt;&#xA;" OwnerUserId="16413" LastEditorUserId="16413" LastEditDate="2018-11-21T08:14:26.250" LastActivityDate="2018-11-22T00:23:56.480" Title="Screenshot Monitor doesn't start" Tags="|release-juno|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17143" PostTypeId="2" ParentId="17142" CreationDate="2018-11-19T05:34:56.607" Score="1" Body="&lt;p&gt;I was able to replicate your issue.  I am able to start the program from the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mono /usr/share/ssm/Screenshot\ Monitor.exe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will work as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mono '/usr/share/ssm/Screenshot Monitor.exe'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;A Log In window appeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wefBU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wefBU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm not sure why it won't start by clicking on the icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed it in Ubuntu and it works just fine. You can launch it from the icon. I didn't notice any differences in the respective &lt;strong&gt;.desktop&lt;/strong&gt; files in Ubuntu and elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regarding the message &lt;code&gt;&quot;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an answer to that here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1859/gtk-message-failed-to-load-module-pantheon-filechooser-module&quot;&gt;Gtk-Message: Failed to load module &amp;quot;pantheon-filechooser-module&amp;quot;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-22T00:23:56.480" LastActivityDate="2018-11-22T00:23:56.480" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17149" PostTypeId="2" ParentId="17009" CreationDate="2018-11-19T15:40:59.537" Score="4" Body="&lt;p&gt;You have to turn off 3D Acceleration under Graphics - Advanced Options in the config for the VM in Parallels. You can leave Vertical Synchronization checked. &lt;/p&gt;&#xA;" OwnerUserId="16420" LastEditorUserId="16420" LastEditDate="2018-11-19T15:58:12.013" LastActivityDate="2018-11-19T15:58:12.013" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17150" PostTypeId="1" CreationDate="2018-11-19T20:31:58.533" Score="1" ViewCount="1267" Body="&lt;p&gt;after today's update my sound is lost. I have an Acer laptop UX430UNR. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have today had a bigger update of the elementary os. Current kernel version is no 4.15.0-39. &#xA;I have pulseaudio installed and under Sound settings the Built-in Analog Stereo device is recognised (as was before). The only problem is that I get no sound out of the speakers.&#xA;Please help...&lt;/p&gt;&#xA;" OwnerUserId="16423" LastActivityDate="2021-07-03T03:39:08.470" Title="Elementary OS Juno - no sound after update" Tags="|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17153" PostTypeId="2" ParentId="16721" CreationDate="2018-11-20T10:48:01.827" Score="1" Body="&lt;h3&gt;Solved&lt;/h3&gt;&#xA;&lt;p&gt;My main problem was that I was unable to access the BIOS, as the normal method for my laptop didn't work (i.e., when the laptop is OFF, press &amp;amp; hold &lt;kbd&gt;F2&lt;/kbd&gt; and turn it ON, keep holding &lt;kbd&gt;F2&lt;/kbd&gt; until the BIOS shows up).&lt;/p&gt;&#xA;&lt;p&gt;However, today after some new desperate attempts with boot-repair, I tried enter the BIOS the way it's normally done on other laptops (i.e., turning it on and &lt;em&gt;then&lt;/em&gt; press &lt;kbd&gt;F2&lt;/kbd&gt; like crazy) - and voilà - it worked!&lt;/p&gt;&#xA;&lt;p&gt;In the BIOS, I had to do a few things suggested in the link to &lt;a href=&quot;https://en.wikipedia.org/wiki/Linux_Mint&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux Mint&lt;/a&gt; forum:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Reset Secure boot to factory settings&lt;/li&gt;&#xA;&lt;li&gt;Erase Secure boot configuration&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;F10&lt;/kbd&gt; to save and reboot (this was &lt;strong&gt;crucial&lt;/strong&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Enter the BIOS again and select three EFI files from my EMMC drive (from within the &lt;em&gt;ubuntu&lt;/em&gt; folder) and give them &lt;em&gt;different&lt;/em&gt; descriptions:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;shimx64.efi&lt;/li&gt;&#xA;&lt;li&gt;grubx64.efi&lt;/li&gt;&#xA;&lt;li&gt;fwupx64.efi&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;Note: I've used name of each file without &amp;quot;x64.efi&amp;quot; as description. But it was important to have the descriptions unique.&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;&lt;kbd&gt;F10&lt;/kbd&gt; to save and a final reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;After this, I was greeted with the elementary OS logo :)&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="482" LastEditDate="2023-03-14T11:09:16.150" LastActivityDate="2023-03-14T11:09:16.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17154" PostTypeId="2" ParentId="17138" CreationDate="2018-11-20T12:02:20.027" Score="0" Body="&lt;p&gt;Ok, if you just want to try it, just follow Paul's instructions or just use Etcher to make your USB bootable. Then boot from USB and try it. Simple as that. Nothing is changed in your system and you can try it freely without the need to install anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to install in a USB drive (not recommended!), you need to select the USB when partitioning. Format the disk as EXT4 and mount it as '\'. I do not suggest this method because Elementary Boot menu is hidden and you may have difficulty in booting up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to install it in your HDD, next to your Windows, first you need to create a partition for Elementary. One partition is enough. Don't forget to make it big enough to install Elementary OS (20 or 30GB should be enough). &#xA;Then create a live USB. Follow Paul's instructions or just download Etcher (works pretty well) to create your bootable USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then boot from your USB (search how to do it in your PC). Basically you need to select USB and not your harddrive to boot-up.&#xA;When installing Elementary, select your new partition and mount it as EXT4. Also flag the format in that partition. On the dropdown, select '\'.&#xA;DO NOT format your Windows or personal Docs partition.&#xA;That is all you need to pay attention to. The rest is fairly intuitive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again, keep in mind Elementary OS boot menu may appear hidden and you may find it difficult to boot Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shout if you need more help.&#xA;Good luck man!&lt;/p&gt;&#xA;" OwnerUserId="15844" LastEditorUserId="16827" LastEditDate="2019-04-19T15:50:53.473" LastActivityDate="2019-04-19T15:50:53.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17156" PostTypeId="2" ParentId="17081" CreationDate="2018-11-20T13:13:34.787" Score="4" Body="&lt;p&gt;The answer (thanks to &lt;a href=&quot;https://plus.google.com/111908144603674806203/posts/eWnWd744PGM&quot; rel=&quot;nofollow noreferrer&quot;&gt;Giovanni Caligaris&lt;/a&gt; on google+) is to install gnome-calendar, gnome-online-accounts and then use the command  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XDG_CURRENT_DESKTOP=GNOME gnome-control-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To access the gnome settings and set your account there. &lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2018-11-20T13:13:34.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17157" PostTypeId="1" AcceptedAnswerId="17174" CreationDate="2018-11-20T14:50:38.307" Score="1" ViewCount="145" Body="&lt;p&gt;My problem is whenever I click the play icon on the sound tab, the music will not start. I have to go to the app every time to play the songs. Shouldn't the songs just start by pressing the play button?&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/jyypt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jyypt.png&quot; alt=&quot;here is what am talking about&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this is normal or not because if it's normal that's just annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And yes all of my songs are in the music directory &lt;/p&gt;&#xA;" OwnerUserId="16394" LastEditorUserId="15904" LastEditDate="2018-11-21T02:37:36.670" LastActivityDate="2018-11-21T18:36:18.483" Title="music app problem" Tags="|settings|release-juno|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17158" PostTypeId="2" ParentId="16445" CreationDate="2018-11-20T19:11:33.403" Score="1" Body="&lt;p&gt;Same here. Don't know what caused the bug. But for the moment I just use &lt;code&gt;xrandr&lt;/code&gt; to disable the laptop monitor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr --output LVDS-1 -off&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;LVDS-1&quot; is the internal monitor for me. You can identify it by just running &lt;code&gt;xrandr&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/34369/how-do-i-turn-off-the-laptop-screen-while-using-an-external-monitor&quot;&gt;Reference&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16433" LastActivityDate="2018-11-20T19:11:33.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17160" PostTypeId="1" CreationDate="2018-11-20T19:38:08.320" Score="2" ViewCount="291" Body="&lt;p&gt;I am new to the Linux world so please bear with me if I don't know anything common.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said I tried to install elementary OS Juno &lt;a href=&quot;/questions/tagged/releas-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;releas-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;releas-juno&lt;/a&gt; yesterday and when I booted from my flash drive it stuck at the glowing boot logo. I pressed &lt;kbd&gt;ESC&lt;/kbd&gt; and it said &lt;code&gt;failed to start light display manager&lt;/code&gt;. If its relevant I already have Windows installed and wanted to dual boot it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solutions?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Edit 1&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I also have &lt;code&gt;failed to start network manager&lt;/code&gt; and &lt;code&gt;failed to start detect available gpus&lt;/code&gt; and deal with any system changes&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Edit 2&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solved it&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem was in the flash drive. Used a new one and it worked like a charm. So if any one faced this problem try to change the boot device or use a dvd. It might work.&lt;/p&gt;&#xA;" OwnerUserId="16435" LastEditorUserId="14940" LastEditDate="2018-12-31T23:00:02.963" LastActivityDate="2018-12-31T23:00:02.963" Title="stuck at glowing boot logo during first installation" Tags="|system-installation|release-juno|usb-drive|" AnswerCount="0" CommentCount="1" ClosedDate="2019-01-01T01:05:16.577" ContentLicense="CC BY-SA 4.0" />
  <row Id="17161" PostTypeId="2" ParentId="17107" CreationDate="2018-11-21T00:10:40.330" Score="1" Body="&lt;p&gt;Solved by burning the ISO disc on Windows 10.  Running Mojave OSX and it appears the feature to burn a bootable ISO image was removed by Apple for some unknown reason.  So OSX users, burn the disc on a Windows 10 machine and it will be fine and bootable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Etcher software made no difference either on Mojave but did not test on Windows 10 to see if Etcher would flash a USB so that it was bootable.  Expect it will work.&lt;/p&gt;&#xA;" OwnerUserId="16382" LastActivityDate="2018-11-21T00:10:40.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17162" PostTypeId="1" CreationDate="2018-11-21T02:17:26.117" Score="0" ViewCount="4006" Body="&lt;p&gt;I did a fresh install in a laptop, and I have no WiFi. I don't have the option neither.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I ran the command &lt;code&gt;lspci&lt;/code&gt; and I saw my network controllers is RTL8821CE.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I also ran &lt;code&gt;sudo apt-get purge bcmwl-kernel-source&lt;/code&gt; and rebooted the machine, but still no WiFi.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The laptop doesn't have an Ethernet port so WiFi is the only option to connect to a Network. Right now I'm using my phone to connect to Internet via USB as a temporary solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop brand and model is: HP PAVILION 15-CW0053LA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="16424" LastEditorUserId="14940" LastEditDate="2018-12-31T23:09:40.430" LastActivityDate="2019-02-02T12:33:09.817" Title="Juno - HP PAVILION 15 - No WiFi after installation" Tags="|release-juno|wifi|drivers|laptop|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17163" PostTypeId="2" ParentId="15417" CreationDate="2018-11-21T04:23:03.747" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Is there a terminal for elementary with the &quot;badge feature&quot; like iTerm&#xA;  for Mac?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I'm not aware of any Linux terminals with that will display a &quot;badge&quot; in the upper right-hand corner, but Linux terminals can display some of the same information. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the link you provided:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;We can display some dynamic status like the current user, host name or&#xA;  git branch.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The username and host name should be displayed in the terminal prompt by default. It should also display the directory that you are in. There are some good sites out there on how to configure the prompt:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.howtogeek.com/307701/how-to-customize-and-colorize-your-bash-prompt/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/307701/how-to-customize-and-colorize-your-bash-prompt/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.cyberciti.biz/tips/howto-linux-unix-bash-shell-setup-prompt.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cyberciti.biz/tips/howto-linux-unix-bash-shell-setup-prompt.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if want the information displayed in the upper right-hand corner of the terminal, I'm not aware of a way to do that.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-21T04:23:03.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17164" PostTypeId="1" CreationDate="2018-11-21T06:45:39.133" Score="2" ViewCount="625" Body="&lt;p&gt;So I have this script that changes the resolution of on of my monitors that works and that I was able to run on login by adding it in settings»Applications»Startup. The only problem is that I need it to run on start up so that the resolution changes before the os actually gets to the login screen because the login screen doesnt display on my other monitor because the monitor the script is made for is actually seen as primary (I assume it is because it is connected to DVI. How would I go about to do that?&#xA;I am on Juno, &#xA;can give more info if needed.&lt;/p&gt;&#xA;" OwnerUserId="16339" LastActivityDate="2018-11-21T19:24:44.293" Title="How to add a script to start up sequence so that it applies before the actual login screen?" Tags="|display|greeter|startup|resolution|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17166" PostTypeId="2" ParentId="712" CreationDate="2018-11-21T07:34:29.843" Score="1" Body="&lt;p&gt;In Juno, there's a shortcut section for screenshots. It includes several shortcut options. Shift + PrintScreen lets you select an area to grab:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gBQHu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gBQHu.png&quot; alt=&quot;screenshot shortcuts in juno&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(You can see from the screenshot I started with disabling the default shortcut, but I'm going to re-enable it, as the point in changing it was to get the functionality of the Shift + PrintScreen shortcut.)&lt;/p&gt;&#xA;" OwnerUserId="16381" LastActivityDate="2018-11-21T07:34:29.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17167" PostTypeId="2" ParentId="2100" CreationDate="2018-11-21T07:37:46.123" Score="0" Body="&lt;p&gt;Another approach would be to use pavucontrol to change the output level:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rPnBi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rPnBi.png&quot; alt=&quot;use pavucontrol to set output gain&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16381" LastActivityDate="2018-11-21T07:37:46.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17168" PostTypeId="1" AcceptedAnswerId="17169" CreationDate="2018-11-21T12:21:32.810" Score="8" ViewCount="2459" Body="&lt;p&gt;Every time that i press the &quot;Windows&quot; Key, this Keyboard Shortcuts pops up. There's a way to disable this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;// btw this is my first time here so I'm sorry if I ask wrong&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3ETNU.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3ETNU.png&quot; alt=&quot;Keyboard Shortcuts Pop UP&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16439" LastActivityDate="2019-02-26T13:31:49.650" Title="How to disable keyboard shortcuts pop up in Juno?" Tags="|keyboard-shortcuts|pantheon|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17169" PostTypeId="2" ParentId="17168" CreationDate="2018-11-21T12:43:52.277" Score="8" Body="&lt;p&gt;Go to Settings &gt; Keyboard and change the default behavior for the ⌘-key to disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;⌘-key is the super-key or the 'windows'-key. &#xA;See &lt;a href=&quot;https://en.wikipedia.org/wiki/Command_key&quot; rel=&quot;noreferrer&quot;&gt;wikipedia&lt;/a&gt; for the origin of the symbol.&lt;/p&gt;&#xA;" OwnerUserId="8317" LastActivityDate="2018-11-21T12:43:52.277" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17170" PostTypeId="2" ParentId="17136" CreationDate="2018-11-21T14:03:50.257" Score="4" Body="&lt;p&gt;This is a known issue. It only occurs with applications that request legacy window decorations (titlebars, borders, etc...). I'm part of the elementary team and I'm looking into a fix, but it's not a quick easy fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the mean time, there's a workaround where you can run the app from the terminal like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=0 slic3r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll need to replace &lt;code&gt;slic3r&lt;/code&gt; with the actual executable name of Slic3r or the path to the executable if that's not correct. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this workaround sometimes causes other issues like open/save dialogs not opening.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further information can be found here:&#xA;&lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/244&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2019-05-10T08:45:57.087" LastActivityDate="2019-05-10T08:45:57.087" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17172" PostTypeId="2" ParentId="17164" CreationDate="2018-11-21T16:48:52.853" Score="1" Body="&lt;p&gt;There are a couple of ways to do this. You can either create a cron job or add your script to &lt;code&gt;/etc/rc.d/rc.local&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This site has more information:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.tecmint.com/auto-execute-linux-scripts-during-reboot-or-startup/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.tecmint.com/auto-execute-linux-scripts-during-reboot-or-startup/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: After talking with &lt;em&gt;Tin jus&lt;/em&gt;, it appears there's no rc.d/rc.local directory in elementary OS. According to the tecmint link, the &lt;code&gt;/etc/rc.d/rc.local&lt;/code&gt; method &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;is valid even for systemd-based distributions.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;A third method is running a startup script in systemd. More information can be found here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://linuxconfig.org/how-to-automatically-execute-shell-script-at-startup-boot-on-systemd-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxconfig.org/how-to-automatically-execute-shell-script-at-startup-boot-on-systemd-linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-21T19:24:44.293" LastActivityDate="2018-11-21T19:24:44.293" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17173" PostTypeId="2" ParentId="16493" CreationDate="2018-11-21T18:23:05.300" Score="1" Body="&lt;p&gt;try with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo system-config-print&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;-&gt; Add&lt;/li&gt;&#xA;&lt;li&gt;-&gt; search your printer and install&lt;/li&gt;&#xA;&lt;li&gt;-&gt; then click secondary&lt;/li&gt;&#xA;&lt;li&gt;-&gt; properties&lt;/li&gt;&#xA;&lt;li&gt;-&gt; politics&lt;/li&gt;&#xA;&lt;li&gt;-&gt; check activate and accepting jobs &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Note:&#xA;if &lt;code&gt;system-config-print&lt;/code&gt; is not installed, do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install system-config-print&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="14940" LastEditDate="2018-12-04T21:26:27.197" LastActivityDate="2018-12-04T21:26:27.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17174" PostTypeId="2" ParentId="17157" CreationDate="2018-11-21T18:36:18.483" Score="1" Body="&lt;p&gt;Well ... I think it's normal, it also works like that in my case. I think that works that way, if you're reproducing something that control works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-21T18:36:18.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17175" PostTypeId="2" ParentId="17150" CreationDate="2018-11-21T18:55:58.127" Score="1" Body="&lt;p&gt;try with alsa mixer, if you want in graphic mode search in appcenter, it is called GNOME ALSA Mixer. verify that it is not muted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-21T18:55:58.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17176" PostTypeId="2" ParentId="17047" CreationDate="2018-11-21T19:17:29.423" Score="0" Body="&lt;p&gt;It would be a good idea to install the latest MESA drivers, you could add the official repositories&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&#xA;sudo apt update&#xA;sudo apt dist-upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They work very well in my case, even in games.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-21T19:17:29.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17177" PostTypeId="1" CreationDate="2018-11-21T19:24:23.163" Score="3" ViewCount="966" Body="&lt;p&gt;I installed Elementary juno last week but I'm not be able to work with Vmware Workstation (last version), when I start virtual machine the console screen does not appear (the video stays on the vmware hourglass with message &quot;waiting ...&quot; ), virtual machine runs correctly because I connected virtual machine by rdp connection and if I suspend VM I see the current state of the screen. Could you tell me if someone else have this problem and if there is a solution?&#xA;Thank you!&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nKk5Z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nKk5Z.png&quot; alt=&quot;Screenshot &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16442" LastActivityDate="2019-11-11T18:14:08.173" Title="VmWare workstation on Juno - Vm Screen doesn't appear" Tags="|settings|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17181" PostTypeId="1" CreationDate="2018-11-22T08:53:09.900" Score="0" ViewCount="1087" Body="&lt;p&gt;I have a 28 inch 4k monitor. How can I resize the icons and text size. could only find 3 sizes at settings &gt; universal access &gt; display &gt; sizes normal/large/larger&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I Ubuntu it is possible to set the size in percentages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this setting in development or maybe there is an app available for it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="16445" LastActivityDate="2024-03-26T04:02:55.310" Title="Change icon size and text size" Tags="|text|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17182" PostTypeId="2" ParentId="17181" CreationDate="2018-11-22T12:04:39.150" Score="0" Body="&lt;p&gt;Those settings you refer to are not available in Elementary. I've tried changing icon size without success. But i use &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary Tweaks&lt;/a&gt; to change text size and that works perfectly. It's enough for me. Try it and see if it helps.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-22T12:04:39.150" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17185" PostTypeId="2" ParentId="15629" CreationDate="2018-11-22T15:42:13.537" Score="0" Body="&lt;p&gt;You can create a .desktop to launch the launcher, its something like a shorcut in Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To create it just write the following in a .desktop file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name= (The name you wnt to appear) &#xA;Comment= (If you want something to appear when you put the mouse over it)&#xA;Exec= (route to launcher binary file)&#xA;Icon= (route to the icon you want for it)&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, you may want to install &lt;a href=&quot;https://appcenter.elementary.io/com.github.spheras.desktopfolder&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.spheras.desktopfolder&lt;/a&gt; to be able to place things in desktop.&lt;/p&gt;&#xA;" OwnerUserId="16448" LastActivityDate="2018-11-22T15:42:13.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17186" PostTypeId="1" AcceptedAnswerId="17218" CreationDate="2018-11-22T17:07:21.100" Score="1" ViewCount="133" Body="&lt;p&gt;I have two disks, a 15 GB SSD &amp;amp; a 500 GB HDD, but elementary OS is only using the SSD. &lt;a href=&quot;https://i.stack.imgur.com/krg8n.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; is a screenshot of the disks (I had an issue with the screenshot tool, low on storage).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Going to &quot;Other locations&quot; -&gt; &quot;Computer&quot; in file manager shows under 500MB free of my 15 GB SSD. Also operations are failing because the lack of storage. Anyone know why this is and how I can fix it?&lt;/p&gt;&#xA;" OwnerUserId="16449" LastEditorUserId="26" LastEditDate="2018-12-06T00:47:56.660" LastActivityDate="2018-12-06T00:47:56.660" Title="elementary OS says only 229 MB free on PC, but it is not using 500 GB HDD" Tags="|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17187" PostTypeId="2" ParentId="4159" CreationDate="2018-11-22T17:26:39.330" Score="1" Body="&lt;p&gt;I would like to refresh this topic. Do you know the way how to uninstall system pantheon top panel (this one on the top) and replace it with one another who supports global menus? I would not to deliberate with is it good approach or not on general. I am a developer who writes code with InteelIJ on 13&quot; screen. Putting this bar to the top gives me one more line of code that's a lot on this screen. I wouldn't argue about user experience because I'm not into it. Thank you in advance for any suggestions.&lt;/p&gt;&#xA;" OwnerUserId="9161" LastActivityDate="2018-11-22T17:26:39.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17188" PostTypeId="1" CreationDate="2018-11-22T17:49:28.470" Score="1" ViewCount="135" Body="&lt;p&gt;Considering moving to elementary and as a musician and photographer, I'm wondering if it supports standard music software like cubase or reason and photography software like Adobe Photoshop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't does it work well under virtualized environments like virtual box or wine?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Femo&lt;/p&gt;&#xA;" OwnerUserId="16450" LastActivityDate="2024-03-26T06:05:45.787" Title="Creative software" Tags="|software-installation|photo-editing|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17189" PostTypeId="2" ParentId="17188" CreationDate="2018-11-22T17:54:30.977" Score="0" Body="&lt;p&gt;There are Linux alternatives to Adobe Photoshop like GIMP and Krita, but you can use Adobe Photoshop with Wine. This is a good article on that:&#xA;&lt;a href=&quot;https://www.techrepublic.com/blog/linux-and-open-source/how-to-install-adobe-photoshop-cs5-on-linux-with-wine/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.techrepublic.com/blog/linux-and-open-source/how-to-install-adobe-photoshop-cs5-on-linux-with-wine/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For music making software for Linux, check out this article:&#xA;&lt;a href=&quot;https://www.tecmint.com/free-music-creation-or-audio-editing-softwares-for-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.tecmint.com/free-music-creation-or-audio-editing-softwares-for-linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-22T17:54:30.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17191" PostTypeId="2" ParentId="15674" CreationDate="2018-11-22T21:02:19.427" Score="1" Body="&lt;p&gt;Long story short, the team recommends doing a clean install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also try using a backup tool like Aptik, but when upgrading this will requires a couple of advanced extra steps.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Use Aptik to backup almost everything to an external disk. Exclude the Dconf database, because this will most likely include version specific information and structures. (This is one of the checkboxes in Easy mode).&lt;/li&gt;&#xA;&lt;li&gt;Do a clean install of the new version of elementary OS.&lt;/li&gt;&#xA;&lt;li&gt;Use Aptik to restore everything from the external disk.&lt;/li&gt;&#xA;&lt;li&gt;Go through your repositories (ppa's) and remove the ones that are unused or unsupported. &#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Run the following command to pretty print your current repositories:&lt;br&gt;&#xA;&lt;code&gt;grep -r --include '*.list' '^deb ' /etc/apt/ | sed -re 's/^\/etc\/apt\/sources\.list((\.d\/)?|(:)?)//' -e 's/(.*\.list):/\[\1\] /' -e 's/deb http:\/\/ppa.launchpad.net\/(.*?)\/ubuntu .*/ppa:\1/'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Go through them and update or remove all repositories which ubuntu code name doesn't match the codename of your new version. (If you don't know how, you should probably not be doing this)&lt;/li&gt;&#xA;&lt;li&gt;Attempt running &lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Remove repo's that can't be retrieved. &lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I've not tried this myself but one could also try not backupping the Repo's and Packages, but then you'll need to reinstall them manually on the new version. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm definitely open for better ideas on the packages and repo's. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-11-22T21:02:19.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17192" PostTypeId="1" CreationDate="2018-11-22T22:58:46.673" Score="0" ViewCount="120" Body="&lt;p&gt;&lt;code&gt;Hi!&lt;/code&gt; I am enjoying using elementaryOS. As an intro, since this is my first post here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also enjoy using Spotify. The following error is spanning like.. once every second in the terminal after executing the &lt;code&gt;snap run&lt;/code&gt;. My question is about the following harmless(Spotify works seamlessly!) yet annoying err.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[1123/004609.016814:ERROR:gl_surface_presentation_helper.cc(161)] GetVSyncParametersIfAvailable() failed!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does anybody here know what this points to, more specific? &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I'm also posting this on the Snap forums and will update the post with&#xA;  a link.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerDisplayName="user16361" LastEditorUserId="15904" LastEditDate="2018-11-30T20:09:42.913" LastActivityDate="2024-02-03T19:05:55.663" Title="Snap run Spotify generating endless errors inside terminal" Tags="|spotify|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17193" PostTypeId="2" ParentId="16991" CreationDate="2018-11-23T05:19:04.253" Score="1" Body="&lt;p&gt;There may be an issue with the Printers plug in settings or it's designed to disable the printers after being idle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not comfortable using command line so I installed &lt;code&gt;synaptic&lt;/code&gt; package manager from the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open synaptic package manager and do a search for &lt;code&gt;switchboard-plug-printers&lt;/code&gt; and remove it.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then do a search for and install &lt;code&gt;system-config-printer&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You can use it from command line as&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo system-config-printer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;. or you can install the &lt;code&gt;AppEditor&lt;/code&gt; from &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; and setup an icon in the Applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My printers all stay enabled and accepting jobs now.&lt;/p&gt;&#xA;" OwnerUserId="16406" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:04.890" LastActivityDate="2018-12-05T23:45:04.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17194" PostTypeId="2" ParentId="16979" CreationDate="2018-11-23T05:31:24.873" Score="0" Body="&lt;p&gt;There may be an issue with the PRINTERS App in settings or it's designed to disable and reject jobs on all printers after being idle. I installed SYNAPTIC package manager from the AppCenter. Do a search for switchboard-plug-printers and remove it. Then do a search for and install system-config-printer. You can use it from command line as system-config-printer or you can install the AppEditor from AppCenter and setup an icon in the applications.&lt;/p&gt;&#xA;" OwnerUserId="16406" LastActivityDate="2018-11-23T05:31:24.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17195" PostTypeId="1" CreationDate="2018-11-23T05:34:26.417" Score="1" ViewCount="411" Body="&lt;p&gt;I can't seem to get any sound working on my HP Elitebook with Elementary 5.0 fresh install. Hope someone can help. Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;aplay -l&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;aplay: device_list:270: no soundcards found...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;pacmd list-sinks&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1 sink(s) available.&#xA;  * index: 0&#xA;    name: &amp;lt;auto_null&amp;gt;&#xA;    driver: &amp;lt;module-null-sink.c&amp;gt;&#xA;    flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY&#xA;    state: SUSPENDED&#xA;    suspend cause: IDLE &#xA;    priority: 1000&#xA;    volume: front-left: 65536 / 100% / 0.00 dB,   front-right: 65536 / 100% / 0.00 dB&#xA;            balance 0.00&#xA;    base volume: 65536 / 100% / 0.00 dB&#xA;    volume steps: 65537&#xA;    muted: no&#xA;    current latency: 0.00 ms&#xA;    max request: 344 KiB&#xA;    max rewind: 344 KiB&#xA;    monitor source: 0&#xA;    sample spec: s16le 2ch 44100Hz&#xA;    channel map: front-left,front-right&#xA;                 Stereo&#xA;    used by: 0&#xA;    linked by: 0&#xA;    configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms&#xA;    module: 11&#xA;    properties:&#xA;        device.description = &quot;Dummy Output&quot;&#xA;        device.class = &quot;abstract&quot;&#xA;        device.icon_name = &quot;audio-card&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Laptop details&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;product: HP EliteBook 820 G3 (L4Q16AV)&#xA;   product: 807C&#xA;      product: Intel(R) Core(TM) i5-6200U CPU @ 2.30GHz&#xA;         product: HMA41GS6AFR8N-TF&#xA;      product: Skylake Host Bridge/DRAM Registers&#xA;         product: HD Graphics 520&#xA;         product: Sunrise Point-LP USB 3.0 xHCI Controller&#xA;            product: xHCI Host Controller&#xA;               product: VFS495 Fingerprint Reader&#xA;               product: HP HD Camera&#xA;            product: xHCI Host Controller&#xA;         product: Sunrise Point-LP Thermal subsystem&#xA;         product: Sunrise Point-LP Serial IO I2C Controller #0&#xA;         product: Sunrise Point-LP CSME HECI #1&#xA;         product: Sunrise Point-LP SATA Controller [AHCI mode]&#xA;         product: Intel Corporation&#xA;            product: RTS522A PCI Express Card Reader&#xA;         product: Intel Corporation&#xA;            product: Wireless 8260&#xA;         product: Sunrise Point-LP LPC Controller&#xA;         product: Sunrise Point-LP PMC&#xA;         product: Sunrise Point-LP SMBus&#xA;         product: Ethernet Connection I219-V&#xA;         product: LITEON L8H-128V2&#xA;   product: SN03044XL&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16456" LastActivityDate="2019-08-24T22:02:05.267" Title="No sound card detected: HP EliteBook" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17196" PostTypeId="2" ParentId="16610" CreationDate="2018-11-23T10:04:07.213" Score="0" Body="&lt;p&gt;It's normal Juno behavior to copy/paste with ctrl+c - ctrl+v, even from terminal.&#xA;Try &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt;. There you have the ability to change 'natural' copy/paste. Just disable it and you have middle click working again. Maybe you need to reboot for changes to take effect.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2018-11-23T10:04:07.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17198" PostTypeId="2" ParentId="17137" CreationDate="2018-11-23T13:27:58.950" Score="0" Body="&lt;p&gt;There was a commit a while ago to fix this but it has not been released yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/files/pull/360&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/pull/360&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-11-23T13:27:58.950" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17200" PostTypeId="2" ParentId="17192" CreationDate="2018-11-23T14:24:19.187" Score="0" Body="&lt;p&gt;Looks like some other people are having this same issue with Google Chrome. This answer worked for one user:&#xA;&lt;a href=&quot;https://unix.stackexchange.com/questions/473115/google-chrome-gpu-driver-issues-on-ubuntu-18-04&quot;&gt;https://unix.stackexchange.com/questions/473115/google-chrome-gpu-driver-issues-on-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-23T14:24:19.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17201" PostTypeId="1" CreationDate="2018-11-23T14:40:18.517" Score="1" ViewCount="3638" Body="&lt;p&gt;I have dconf editor but everything is changed in juno. so we cant edit the wingpanels opacity there. if we can, how? i have recently arrived at linux environment so please help me out a bit. thanks&lt;/p&gt;&#xA;" OwnerUserId="16435" LastActivityDate="2018-11-28T08:11:12.230" Title="Customising the wingpanel in juno? like adding blur?" Tags="|wingpanel|release-juno|dconf|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17205" PostTypeId="2" ParentId="9097" CreationDate="2018-11-24T01:58:44.357" Score="0" Body="&lt;p&gt;I'm guessing this isn't what you're asking, but I use a different workflow to achieve the net-effect of having music synced to my phone. Run a Plex or Kodi media server, and then use the Plex phone app or Yatze app to stream and sync media to your phone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My actual setup is this:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Synology NAS storing the media&lt;/li&gt;&#xA;&lt;li&gt;Nextcloud on a Raspberry Pi, mounting the NAS to see/use files&lt;/li&gt;&#xA;&lt;li&gt;Kodi running on a separate machine as the media server to play media on my TV and serve to mobile apps&lt;/li&gt;&#xA;&lt;li&gt;Firefox and/or Webpin to play music from Kodi on Elementary via the Kodi web UI&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It's a bit more complicated than synching music directly to a phone, but brings other benefits and requires no cables to sync.&lt;/p&gt;&#xA;" OwnerUserId="16252" LastActivityDate="2018-11-24T01:58:44.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17206" PostTypeId="2" ParentId="16582" CreationDate="2018-11-24T06:40:26.900" Score="1" Body="&lt;p&gt;The time and date format for the Pantheon Greeter is defined in its translation files here: &lt;a href=&quot;https://github.com/elementary/greeter/tree/master/po&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/tree/master/po&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can fork the project, make the change to po file and open a pull request so that the developer can review your change and publish it with the next version. There is no coding involved. Open the po file for your language and find &lt;code&gt;#. / Time display&lt;/code&gt; section. There you'll find a link to the guidelines on how to set &lt;code&gt;msgstr&lt;/code&gt; in that section to match your country's setup. For the reference, you can also open another po file and look there.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-11-24T06:40:26.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17207" PostTypeId="2" ParentId="13870" CreationDate="2018-11-25T08:00:59.230" Score="0" Body="&lt;p&gt;Well I could activate the printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I print ie. LibreOffice Write document I've got the following message: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Der Drucker konnte nicht gestartet werden. Bitte überprüfen Sie Ihre&#xA;  Druckerkonfiguration.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;(it's German - it means)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The printer couldn't be started, please check your printer configuration&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;, any idea?&lt;/p&gt;&#xA;" OwnerUserId="16475" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:21.770" LastActivityDate="2018-12-05T23:45:21.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17209" PostTypeId="2" ParentId="17005" CreationDate="2018-11-25T11:03:08.070" Score="0" Body="&lt;p&gt;Pantheon-files uses a thumbnailer daemon called tumbler. You can disable the generation of thumbnails for PDF, Photos, Documents, etc. by editing the config file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/tumbler/tumbler.rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;here you have to change &lt;code&gt;Disabled=false&lt;/code&gt; to &lt;code&gt;Disabled=true&lt;/code&gt; in the desired section&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl+O, Enter, Ctrl+X to exit nano&lt;/p&gt;&#xA;" OwnerUserId="16476" LastEditorUserId="26" LastEditDate="2018-12-02T16:41:02.490" LastActivityDate="2018-12-02T16:41:02.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17210" PostTypeId="2" ParentId="3700" CreationDate="2018-11-25T11:11:06.970" Score="0" Body="&lt;p&gt;It may be different on the MacBook Pro, but on my Dell Inspirion 17, the directory &lt;code&gt;/sys/class/leds/dell::kbd_backlight&lt;/code&gt; has several files of interest, particulary the one named &lt;code&gt;stop_timeout&lt;/code&gt;. The current contents of this file are&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /sys/class/leds/dell\:\:kbd_backlight/stop_timeout &#xA;10s&#xA;$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I just tried modifying the value from &lt;code&gt;10s&lt;/code&gt; to &lt;code&gt;60s&lt;/code&gt;. I then ran &lt;code&gt;xprintidle&lt;/code&gt; just to see if it reported any different values than it was reporting when I first looked at what the above script would be doing. The values were similar. I waited 10 seconds, and the keyboard backlight stayed on! (However the cursor in my shell stopped blinking; I'm guessing there's another file that defines that.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realize this isn't something official, but if it is as easy as changing a setting in a file, it's good enough for me.&lt;/p&gt;&#xA;" OwnerUserId="16381" LastEditorUserId="16381" LastEditDate="2018-11-25T11:17:22.723" LastActivityDate="2018-11-25T11:17:22.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17211" PostTypeId="1" CreationDate="2018-11-25T11:20:09.960" Score="1" ViewCount="3258" Body="&lt;p&gt;I have a problem with Hardware Sensors Indicator (&lt;a href=&quot;https://launchpad.net/indicator-sensors&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/indicator-sensors&lt;/a&gt;) after upgrading to juno from loki through clean install. As I click on the indicator-sensors icon after installation through snap, the app icon didn't show up on wingpanel, with notification center showing:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No Sensors Enabled For Monitoring&#xA;Sensors detected but none are enabled for monitoring. To enable monitoring of sensors open the Preferences window and select the sensors to monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the app icon didn't show up, it is apparent to me that there's no way to access the Preferences window. Such problem didn't occur when I installed it on loki so I would like to ask:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Does it mean indicator-sensors doesn't compatible with juno (at least for the time being)? and&lt;/li&gt;&#xA;&lt;li&gt;If so, is there any other alternative so as to display sensors reading on wingpanel? I have tried psensor but it didn't show anything there, even with the associated options enabled.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16477" LastEditorUserId="18048" LastEditDate="2019-05-07T09:04:14.223" LastActivityDate="2019-12-09T00:11:59.103" Title="elementary OS 5.0 and Hardware Sensors Indicator" Tags="|wingpanel|software-installation|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17212" PostTypeId="1" CreationDate="2018-11-25T11:24:35.153" Score="2" ViewCount="6132" Body="&lt;p&gt;When I install an app with snap install command , it's icon does not appear in the apps lost and I have to run it with snap run command .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I add it's icon to the apps list???&lt;/p&gt;&#xA;" OwnerUserId="16478" LastActivityDate="2018-11-27T21:07:59.810" Title="Icon of installed apps with snap don't appear in apps list" Tags="|user-interface|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17213" PostTypeId="1" CreationDate="2018-11-25T12:30:11.287" Score="2" ViewCount="556" Body="&lt;p&gt;I want to try either no top panel or maybe something else. I assume I can do this by putting a .desktop in an autostart directory, but how to stop Wingpanel loading at start?&lt;/p&gt;&#xA;" OwnerUserId="16480" LastActivityDate="2019-01-28T00:48:55.953" Title="How to stop wingpanel starting up?" Tags="|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17216" PostTypeId="2" ParentId="17211" CreationDate="2018-11-25T15:47:22.080" Score="2" Body="&lt;p&gt;the &quot;problem&quot; is that the Wingpanel-indicator-ayatana is no longer in elementary juno. if you want to install it, try the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?sl=es&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=es-419&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fentornosgnulinux.com%2F2018%2F08%2F15%2Fcomo-instalar-wingpanel-indicator-ayatana-en-elementary-os-juno%2F&amp;amp;edit-text=&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have nice day&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD: if it works for you, please tell us&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-25T15:47:22.080" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17218" PostTypeId="2" ParentId="17186" CreationDate="2018-11-25T19:06:21.817" Score="0" Body="&lt;p&gt;You likely have a few options. 15GB is a bit small for a desktop drive and you've likely run out of space on it. You could reinstall Elementary setting the HDD as your /home and /usr partitions. Another option would be copying &lt;em&gt;everything&lt;/em&gt; over to the HDD, but this is likely to make boot slower. A third, more advanced option would be setting the HDD to be your /home and /usr and transferring everything over. They're essentially in order of how easy they are.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;BEFORE DOING ANY OF THESE, ENSURE THAT YOU'VE BACKED UP ANYTHING YOU CARE ABOUT.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;THEY WILL ALL WIPE THE HDD, THE FIRST WILL WIPE YOUR SSD AND BOTH THE FIRST AND THIRD WILL MAKE MAJOR CHANGES TO YOUR SSD's FILE SYSTEM THAT WILL MAKE IT IMPOSSIBLE TO BOOT ELEMENTARY WITHOUT BOTH THE SSD AND THE HDD PLUGGED IN.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Reinstall elementaryOS&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;This is the best solution if you don't really have anything on your system.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;Backup everything, it will all be deleted.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;When installing, select &quot;something else&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;New Partition Table&quot; for both drives (the /dev/sd{x} without a number). &lt;strong&gt;This will erase &lt;em&gt;everything&lt;/em&gt; on your drive.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;On your HDD, create a new partition by clicking &quot;free space&quot; then &quot;+&quot;. You can leave the defaults, except set your mount point as &lt;code&gt;/home&lt;/code&gt; and size to about 425000 (about 425GB).&lt;/li&gt;&#xA;&lt;li&gt;Repeat step 4 on the HDD, set the mount point as &lt;code&gt;/usr&lt;/code&gt; and let the size be the rest of disk.&lt;/li&gt;&#xA;&lt;li&gt;On the SSD set the mount point as &lt;code&gt;/&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Ensure that &quot;Device for boot loader installation&quot; is your SSD.&lt;/li&gt;&#xA;&lt;li&gt;Finish the installation.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h1&gt;Copying everything over&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;This solution will keep your files intact but will mean that your SSD won't be used for boot or anything else.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;BACKUP EVERYTHING YOU CARE ABOUT OR ELSE.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Boot into your elementaryOS install disk/USB key.&lt;/li&gt;&#xA;&lt;li&gt;Open the GParted Partition Editor.&lt;/li&gt;&#xA;&lt;li&gt;Identify the SSD and HDD's disk identifiers (&lt;code&gt;/dev/sd{a,b,c,etc.}&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Open a terminal and run &lt;code&gt;sudo dd if=/dev/&amp;lt;source disk, the SSD&amp;gt; of=/dev/&amp;lt;dest. disk, the HDD&amp;gt; bs=4M&lt;/code&gt; (&lt;code&gt;dd&lt;/code&gt; copies the entire contents of the &lt;code&gt;if&lt;/code&gt; file or disk to &lt;code&gt;of&lt;/code&gt;, &lt;code&gt;bs=4M&lt;/code&gt; tells it to copy 4MB at a time).&lt;/li&gt;&#xA;&lt;li&gt;Wait until it finishes, it won't show you your progress and will take some time (for 15GB to a HDD my guess is an hour or so &lt;em&gt;at most&lt;/em&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Remove your SSD from your computer and reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h1&gt;Change your mountpoints&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;This solution is quite advanced and should work, but I haven't tested it. Use it at your own risk. You may lose data or end up being unable to boot. &lt;strong&gt;Read through the entire instructions. If you're not sure you can do everything below, don't try to.&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;BACKUP EVERYTHING YOU CARE ABOUT OR ELSE.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Boot into your elementaryOS install disk/USB key.&lt;/li&gt;&#xA;&lt;li&gt;Create two new partitions on your HDD with GParted (ext4, primary, the partition that will end up being &lt;code&gt;/home&lt;/code&gt; should be about 425GB on a 500GB disk, the one that will be &lt;code&gt;/usr&lt;/code&gt; should be the rest).&lt;/li&gt;&#xA;&lt;li&gt;Copy over the contents of &lt;code&gt;/usr&lt;/code&gt; and &lt;code&gt;/home&lt;/code&gt; to the roots of the respective partitions (so that the contents is the first thing you see when mounting the partitions).&lt;/li&gt;&#xA;&lt;li&gt;Mount the SSD and remove &lt;code&gt;/usr&lt;/code&gt; and &lt;code&gt;/home&lt;/code&gt;  from it (&lt;code&gt;/&amp;lt;mountpoint&amp;gt;/usr&lt;/code&gt;, &lt;strong&gt;not &lt;code&gt;/usr&lt;/code&gt;&lt;/strong&gt;). You've backed it up first, right?&lt;/li&gt;&#xA;&lt;li&gt;Recreate the directories. They need to be there (but empty) as mountpoints.&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;lsblk -f&lt;/code&gt; to identify the UUIDs of the relevant partitions.&lt;/li&gt;&#xA;&lt;li&gt;Mount your SSD, edit /etc/fstab on it, and add to the end:&#xA;&lt;code&gt;&#xA;UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx /home ext4   defaults  0      2&#xA;UUID=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx /usr  ext4   defaults  0      2&#xA;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Save, reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16484" LastEditorUserId="16484" LastEditDate="2018-11-25T19:17:53.800" LastActivityDate="2018-11-25T19:17:53.800" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17220" PostTypeId="2" ParentId="855" CreationDate="2018-11-25T19:27:37.873" Score="3" Body="&lt;p&gt;r3bl's answer does not work on the latest version of Elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Essentially what you need to do now is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run dconf-editor as YOUR user, NOT sudo / root&lt;/li&gt;&#xA;&lt;li&gt;Navigate to &lt;code&gt;/io/elementary/desktop/wingpanel/sound/max-volume&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Toggle &lt;code&gt;Use Defaults&lt;/code&gt; to &lt;code&gt;False&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Change max to number of your choice&lt;/li&gt;&#xA;&lt;li&gt;Navigate to &lt;code&gt;/org/gnome/desktop/sound&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Toggle &lt;code&gt;Use Defaults&lt;/code&gt; to &lt;code&gt;False&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Make current value &lt;code&gt;True&lt;/code&gt; (this seems to allow the use of the keyboard shortcuts for volume)&lt;/li&gt;&#xA;&lt;li&gt;Exit&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="16486" LastActivityDate="2018-11-25T19:27:37.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17221" PostTypeId="2" ParentId="17212" CreationDate="2018-11-25T19:57:38.500" Score="1" Body="&lt;p&gt;1) You may have to reboot. I've installed apps via snap before, like Brave, and they appear in the Applications menu but with a generic icon. The icon is there after rebooting. As Sebastian noted below, logging out/logging in should work too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) You can edit the &lt;strong&gt;.desktop&lt;/strong&gt; file. It will either be in &lt;code&gt;/etc/share/applications&lt;/code&gt; or from your home directory it will be in &lt;code&gt;.local/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) You can install a program from the AppCenter called &lt;strong&gt;AppEditor&lt;/strong&gt; and use it to create a menu item. It's essentially a more user friendly way of the instructions in #2.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-27T21:07:59.810" LastActivityDate="2018-11-27T21:07:59.810" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17222" PostTypeId="1" CreationDate="2018-11-25T21:50:27.380" Score="1" ViewCount="1756" Body="&lt;p&gt;When using &lt;em&gt;io.elementary.videos&lt;/em&gt;, &lt;em&gt;cinema&lt;/em&gt; (from the store), or &lt;em&gt;totem&lt;/em&gt; (from gnome) (gui)applications, after a while, the video stops while the audio continue his execution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used &lt;em&gt;.mp4&lt;/em&gt; and &lt;em&gt;.mkv&lt;/em&gt; videos and codec &lt;em&gt;gstreamer&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My pc is a &lt;em&gt;Dell inspiron 7559&lt;/em&gt; (laptop) with &lt;em&gt;Quad-Core Intel® Core™ i7-6700HQ CPU @ 2.60GHz&lt;/em&gt;, &lt;em&gt;Intel Corporation HD Graphics 530&lt;/em&gt; and &lt;em&gt;NVIDIA Corporation GM107M [GeForce GTX 960M]&lt;/em&gt; (with propietary drivers).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It has a 4k screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Someone knows how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerDisplayName="user16488" LastEditorDisplayName="user16488" LastEditDate="2018-11-27T20:25:13.520" LastActivityDate="2019-08-25T09:03:05.403" Title="Video execution lag" Tags="|release-juno|videos|video-player|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="17224" PostTypeId="2" ParentId="16439" CreationDate="2018-11-25T22:54:43.210" Score="1" Body="&lt;p&gt;To add a minimize current window hot corner in Juno:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install dconf editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run dconf editor and navigate to &#xA;org &gt; pantheon &gt; desktop &gt; gala &gt; behavior&#xA;Select the corner you want and click on it&#xA;Click on custom behavior and select 'minimize-current'&#xA;You're all set!&lt;/p&gt;&#xA;" OwnerUserId="16490" LastActivityDate="2018-11-25T22:54:43.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17225" PostTypeId="1" AcceptedAnswerId="17360" CreationDate="2018-11-26T00:03:15.117" Score="0" ViewCount="39" Body="&lt;p&gt;anyone knows the new invitation like for Translation Slack that would be great, the link in the website is expired.&lt;/p&gt;&#xA;" OwnerUserId="16491" LastActivityDate="2018-12-02T20:49:13.423" Title="Translations Slack invitation link is expired" Tags="|elementary-website|translation|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-02T20:50:45.300" ContentLicense="CC BY-SA 4.0" />
  <row Id="17228" PostTypeId="1" CreationDate="2018-11-26T02:42:16.367" Score="2" ViewCount="1380" Body="&lt;p&gt;I'm new to Linux and was attempting to install the Brave Browser using the instructions on the website, listed below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl -s https://brave-browser-apt-release.s3.brave.com/brave-core.asc | sudo apt-key add -&#xA;&#xA;echo &quot;deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ `lsb_release -sc` main&quot; | sudo tee /etc/apt/sources.list.d/brave-browser-release-`lsb_release -sc`.list&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install brave-browser brave-keyring&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This didn't work, so I tried playing around with it, i.e changing the commands a bit, and in my disgusting ignorance I made bad boo boo... now every time I try to install an app from the app center I get this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Type 'sudo' is not known on line 1 in source list&#xA;/etc/apt/sources.list.d/brave-browser-release-juno.list E: The list of&#xA;sources could not be read&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I went to &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; and behold: a new .list file called &lt;code&gt;brave-browser-release-juno.list&lt;/code&gt; - I opened it and there is one line in the file: &lt;code&gt;sudo apt update&lt;/code&gt;, that's all it says. Sadly Elemenary won't read any of the other lists now, and I cannot figure out how to delete this new unwanted .list file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can somebody smarter than me please advise?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I restore this folder to its default state?&lt;/p&gt;&#xA;" OwnerUserId="16493" LastEditorUserId="14940" LastEditDate="2018-11-30T20:08:35.523" LastActivityDate="2018-11-30T20:08:35.523" Title="Accidentally created a bad source list- How to delete it?" Tags="|release-juno|apt|thirdpartyapps|sudo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17229" PostTypeId="2" ParentId="17228" CreationDate="2018-11-26T03:14:22.003" Score="-2" Body="&lt;p&gt;1) install &lt;code&gt;software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) run &lt;code&gt;software-properties-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Click the &quot;Other Software&quot; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) uncheck the bad repository&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Brave using &lt;strong&gt;apt&lt;/strong&gt;, check out &lt;em&gt;mtsfaria&lt;/em&gt;'s the answer to this question:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17096/brave-browser-and-repo-update&quot;&gt;Brave Browser and repo update&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That solution worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Brave using &lt;strong&gt;snap&lt;/strong&gt;, run &lt;em&gt;sudo snap install brave&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-26T03:14:22.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17230" PostTypeId="2" ParentId="17228" CreationDate="2018-11-26T03:19:54.290" Score="1" Body="&lt;p&gt;You failed writing the command and also the command, even if you write it well, will not work for elementary as it is.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix it and then install Brave through &lt;code&gt;apt&lt;/code&gt;, open a terminal and write and execute:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo rm -fr /etc/apt/sources.list.d/brave-browser*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ echo &quot;deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/bionic main&quot; | sudo tee /etc/apt/sources.list.d/brave-browser-release-bionic.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that should fix the problem&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;now you can continue installing Brave as the website says&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install brave-browser brave-keyring&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Remember that elementaryOS is based on Ubuntu but isn't Ubuntu, so the command &lt;code&gt;$ lsb_release -sc&lt;/code&gt; in Ubuntu 18.04 answers &lt;code&gt;bionic&lt;/code&gt; and in elementary &lt;code&gt;juno&lt;/code&gt;. That repo expected &lt;code&gt;bionic&lt;/code&gt; as keyword&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to write Brave Browser staff to write instructions for elementary changing the command &lt;code&gt;lsb_release -cs&lt;/code&gt; to &lt;code&gt;lsb_release -csu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lsb_release -csu&#xA;bionic&#xA;&#xA;$ lsb_release -cs&#xA;juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-26T03:33:12.333" LastActivityDate="2018-11-26T03:33:12.333" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17234" PostTypeId="2" ParentId="13056" CreationDate="2018-11-26T09:03:52.630" Score="1" Body="&lt;p&gt;I had a similar issue where increasing the volume on my USB headset by one step (tick) would drastically increase the volume. Even worse, lowering the volume below a certain threshold (roughly 20-25%) would mute the sound alltogether.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I worked around this by installing pavucontrol (&lt;code&gt;sudo apt install pavucontrol&lt;/code&gt;) and lowering the volume bar for my music application on the first tab.&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2018-11-26T09:03:52.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17236" PostTypeId="1" AcceptedAnswerId="17237" CreationDate="2018-11-26T12:23:03.213" Score="1" ViewCount="2479" Body="&lt;p&gt;When i watch videos on youtube using firefox or Epiphany the video freezes when i do nothing for a few minutes and i have to move the mouse so that the video continues it's a very annoying problem if you know the solution your answer is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this person is having the same problem &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17064/video-freezing-when-do-nothing-for-a-few-minutes&quot;&gt;video freezing when do nothing for a few minutes&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and this person &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15020/videos-in-epiphany-problem&quot;&gt;Videos in Epiphany problem&lt;/a&gt; this person is using loki so this problem is in loki and juno as far as i know.&lt;/p&gt;&#xA;" OwnerUserId="16394" LastActivityDate="2018-12-02T16:48:08.983" Title="Video freezes when watching videos" Tags="|release-loki|release-juno|firefox|epiphany|web-browser|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17237" PostTypeId="2" ParentId="17236" CreationDate="2018-11-26T13:26:35.930" Score="3" Body="&lt;p&gt;I had the same issues on two different computers, one with Intel HD4400 and one with Intel HD620 CPU/GPU.&#xA;This is how I resolve the problem:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Updated Open Graphics Drivers PPA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:oibaf/graphics-drivers&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This will update your Mesa graphics drivers but most importantly your &lt;code&gt;xserver-xorg-video-*&lt;/code&gt; driver.&#xA;A note of caution: It's been known for these drivers to have some issues so I would suggest that after the update, if everything works, remove this PPA from your sources list.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Create &lt;code&gt;/etc/X11/xorg.conf.d/20-intel.conf&lt;/code&gt; file with this content:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Section &quot;Device&quot;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Identifier  &quot;Intel Graphics&quot;&#xA;&#xA;Driver      &quot;intel&quot;&#xA;&#xA;Option      &quot;AccelMethod&quot;    &quot;sna&quot;&#xA;&#xA;Option      &quot;DRI&quot;            &quot;3&quot;&#xA;&#xA;Option      &quot;TearFree&quot;       &quot;true&quot;&#xA;&#xA;Option      &quot;Backlight&quot;      &quot;intel_backlight&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EndSection&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;code&gt;mpv&lt;/code&gt; Media Player. Not &lt;code&gt;gnome-mpv&lt;/code&gt; but &lt;code&gt;mpv&lt;/code&gt;. Use this for playing your local videos.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The 1. and 2. did manage to remove all my video-in-browser troubles, I even get to have hardware acceleration in Google Chrome without any issues. Number 3. helped me with the local video files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a good reading on this here: &lt;a href=&quot;https://wiki.ubuntu.com/IntelQuickSyncVideo&quot; rel=&quot;nofollow noreferrer&quot;&gt;IntelQuickSyncVideo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In case you don't have the command &lt;code&gt;add-apt-repository&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then redo the previous command who contains &lt;code&gt;add-apt-repository&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="26" LastEditDate="2018-12-02T16:48:08.983" LastActivityDate="2018-12-02T16:48:08.983" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17238" PostTypeId="1" CreationDate="2018-11-26T14:46:35.100" Score="2" ViewCount="1818" Body="&lt;p&gt;What am I missing? I've got Elementary running in Hyper-V, but the only screen resolution available to me is 1152x864.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course I figure it out as soon as I post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the record, it was adding &lt;code&gt;video=hyperv_fb:1680x1050&lt;/code&gt; to the &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; line in &lt;code&gt;/etc/default/grub&lt;/code&gt;, then &lt;code&gt;update-grub&lt;/code&gt; and a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't let me change resolution as and when I want, but should be OK for now.&lt;/p&gt;&#xA;" OwnerUserId="16499" LastEditorUserId="26" LastEditDate="2018-12-06T00:41:36.467" LastActivityDate="2021-08-11T20:39:54.153" Title="Change resolution when running in Hyper-V" Tags="|display|resolution|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17239" PostTypeId="1" AcceptedAnswerId="17240" CreationDate="2018-11-26T15:16:49.960" Score="1" ViewCount="7960" Body="&lt;p&gt;I'm trying to install elementary-tweaks on Juno but adding the ppa is causing an error. Here is my console output...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:7 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease                                                                  &#xA;The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C1D89326B1C71AB9&#xA;Get:10 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [88.5 kB]&#xA;Hit:11 https://packages.lunarg.com/vulkan/1.1.85 bionic InRelease &#xA;Reading package lists... Done                                           &#xA;W: GPG error: http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY C1D89326B1C71AB9&#xA;E: The repository 'http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyone know how I go about fixing this ? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16500" LastEditorUserId="14940" LastEditDate="2018-11-30T20:17:04.240" LastActivityDate="2019-05-16T19:04:03.520" Title="Can't install elementary-tweaks on Juno" Tags="|release-juno|apt|thirdpartyapps|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17240" PostTypeId="2" ParentId="17239" CreationDate="2018-11-26T15:42:56.893" Score="4" Body="&lt;p&gt;Follow this steps&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal, then write and execute (by pressing &lt;kbd&gt;ENTER&lt;/kbd&gt;) this commands, one at a time:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;em&gt;will ask your password&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;em&gt;will ask you press &lt;kbd&gt;ENTER&lt;/kbd&gt; to confirm the installation of the PPA&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;em&gt;(newer version of &lt;code&gt;add-apt-repository&lt;/code&gt; runs &lt;code&gt;apt update&lt;/code&gt; after automatically. In case it didn't, just run &lt;code&gt;sudo apt update&lt;/code&gt; yourself)&lt;/em&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt install elementary-tweaks&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Description of your problem:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You didn't (don't) have the gpg key, with &lt;code&gt;add-apt-repository&lt;/code&gt; you get it. And installing &lt;code&gt;software-properties-common&lt;/code&gt; provides that command.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I'm curious, which instructions did you follow to install &lt;code&gt;elementary-tweaks&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-26T16:07:06.997" LastActivityDate="2018-11-26T16:07:06.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17241" PostTypeId="2" ParentId="14366" CreationDate="2018-11-26T16:08:43.393" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Is it possible to recover the Pictures icon once the folder is renamed&#xA;  again to Pictures?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Yes, just rename it back to Pictures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y6dMx.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y6dMx.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-26T16:08:43.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17244" PostTypeId="1" AcceptedAnswerId="17246" CreationDate="2018-11-26T19:47:55.227" Score="1" ViewCount="412" Body="&lt;p&gt;For some reason in the last few days, my keyboard shortcuts to adjust volume broke. I haven't done anything crazy - the only related thing I can think of is I added myself to the audio group so I could get audio over HDMI working (which, btw, was also weird).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways, I didn't think it was a big deal - just go into Keyboard settings and fix the shortcut. Except whenever I try to set my shortcuts, it just acts like I hit &lt;code&gt;Escape&lt;/code&gt; or something and they stay disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;code&gt;xev&lt;/code&gt; to double check what the system sees those keys as, and also recorded a video using Screencast which confirmed that the keys are being seen as &lt;code&gt;XF86AudioRaiseVolume&lt;/code&gt;, &lt;code&gt;XF86AudioLowerVolume&lt;/code&gt;, and &lt;code&gt;XF86AudioMute&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the record, I'm running eOS on a Toshiba Chromebook 2 (2015), with the i3 processor, so I have a chromebook keyboard layout. I ran fascinatingcaptain's script &lt;a href=&quot;https://github.com/fascinatingcaptain/CBFixesAndTweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;from his github&lt;/a&gt; to remap the media keys and everything's been working fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody know what's going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gfycat.com/SentimentalMatureAnemonecrab&quot; rel=&quot;nofollow noreferrer&quot;&gt;Video trying to edit keyboard shortcuts&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Steps I've Taken So Far&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Thanks @Sebastian for all the help so far. I followed your instructions for editing the key settings and then locking them down, and that seemed to make the settings stick. The media keys functioned normally. After a system restart it broke again. I can confirm that the keys are set properly, since &lt;code&gt;gsettings get org.gnome...&lt;/code&gt; outputs what I would expect, i.e. &lt;code&gt;XF86AudioRaiseVolume&lt;/code&gt;, etc. Also, trying to edit them spits back an error, which seems to confirm that locking them worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the output from listing my current media key and keybindings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings list-recursively org.gnome.settings-daemon.plugins.media-keys | sort | more&lt;/code&gt; yields:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.settings-daemon.plugins.media-keys active true&#xA;org.gnome.settings-daemon.plugins.media-keys area-screenshot-clip '&amp;lt;Ctrl&amp;gt;&amp;lt;Shift&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys area-screenshot '&amp;lt;Shift&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys calculator 'XF86Calculator'&#xA;org.gnome.settings-daemon.plugins.media-keys control-center 'XF86Tools'&#xA;org.gnome.settings-daemon.plugins.media-keys custom-keybindings ['/org/gnome/settings-daemon/plugins/media-keys/custom-keybindings/custom0/', '/org/gnome/settings-daemon/plugins/media-keys/custom-keybindings/custom1/', '/org/gnome/settings-daemon/plugins/media-keys/custom-keybindings/custom2/', '/org/gnome/settings-daemon/plugins/media-keys/custom-keybindings/custom3/']&#xA;org.gnome.settings-daemon.plugins.media-keys decrease-text-size ''&#xA;org.gnome.settings-daemon.plugins.media-keys eject 'XF86Eject'&#xA;org.gnome.settings-daemon.plugins.media-keys email 'XF86Mail'&#xA;org.gnome.settings-daemon.plugins.media-keys help ''&#xA;org.gnome.settings-daemon.plugins.media-keys home 'XF86Explorer'&#xA;org.gnome.settings-daemon.plugins.media-keys increase-text-size ''&#xA;org.gnome.settings-daemon.plugins.media-keys logout '&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Delete'&#xA;org.gnome.settings-daemon.plugins.media-keys magnifier '&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;8'&#xA;org.gnome.settings-daemon.plugins.media-keys magnifier-zoom-in '&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;equal'&#xA;org.gnome.settings-daemon.plugins.media-keys magnifier-zoom-out '&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;minus'&#xA;org.gnome.settings-daemon.plugins.media-keys max-screencast-length uint32 30&#xA;org.gnome.settings-daemon.plugins.media-keys media 'XF86AudioMedia'&#xA;org.gnome.settings-daemon.plugins.media-keys next 'XF86AudioNext'&#xA;org.gnome.settings-daemon.plugins.media-keys on-screen-keyboard ''&#xA;org.gnome.settings-daemon.plugins.media-keys pause 'XF86AudioPause'&#xA;org.gnome.settings-daemon.plugins.media-keys play 'XF86AudioPlay'&#xA;org.gnome.settings-daemon.plugins.media-keys previous 'XF86AudioPrev'&#xA;org.gnome.settings-daemon.plugins.media-keys priority 0&#xA;org.gnome.settings-daemon.plugins.media-keys screencast '&amp;lt;Ctrl&amp;gt;&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;R'&#xA;org.gnome.settings-daemon.plugins.media-keys screenreader '&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;s'&#xA;org.gnome.settings-daemon.plugins.media-keys screensaver '&amp;lt;Super&amp;gt;l'&#xA;org.gnome.settings-daemon.plugins.media-keys screenshot-clip '&amp;lt;Ctrl&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys screenshot 'Print'&#xA;org.gnome.settings-daemon.plugins.media-keys search 'XF86Search'&#xA;org.gnome.settings-daemon.plugins.media-keys stop 'XF86AudioStop'&#xA;org.gnome.settings-daemon.plugins.media-keys terminal '&amp;lt;Super&amp;gt;t'&#xA;org.gnome.settings-daemon.plugins.media-keys toggle-contrast ''&#xA;org.gnome.settings-daemon.plugins.media-keys video-out '&amp;lt;Super&amp;gt;p'&#xA;org.gnome.settings-daemon.plugins.media-keys volume-down 'XF86AudioLowerVolume'&#xA;org.gnome.settings-daemon.plugins.media-keys volume-mute 'XF86AudioMute'&#xA;org.gnome.settings-daemon.plugins.media-keys volume-up 'XF86AudioRaiseVolume'&#xA;org.gnome.settings-daemon.plugins.media-keys window-screenshot '&amp;lt;Alt&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys window-screenshot-clip '&amp;lt;Ctrl&amp;gt;&amp;lt;Alt&amp;gt;Print'&#xA;org.gnome.settings-daemon.plugins.media-keys www 'XF86WWW'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings list-recursively org.gnome.desktop.wm.keybindings | sort | more&lt;/code&gt; yields:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.desktop.wm.keybindings activate-window-menu ['&amp;lt;Alt&amp;gt;space']&#xA;org.gnome.desktop.wm.keybindings always-on-top @as []&#xA;org.gnome.desktop.wm.keybindings begin-move ['&amp;lt;Alt&amp;gt;F7']&#xA;org.gnome.desktop.wm.keybindings begin-resize ['&amp;lt;Alt&amp;gt;F8']&#xA;org.gnome.desktop.wm.keybindings close ['&amp;lt;Alt&amp;gt;F4']&#xA;org.gnome.desktop.wm.keybindings cycle-group ['&amp;lt;Alt&amp;gt;F6']&#xA;org.gnome.desktop.wm.keybindings cycle-group-backward ['&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;F6']&#xA;org.gnome.desktop.wm.keybindings cycle-panels-backward ['&amp;lt;Shift&amp;gt;&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Escape']&#xA;org.gnome.desktop.wm.keybindings cycle-panels ['&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Escape']&#xA;org.gnome.desktop.wm.keybindings cycle-windows ['&amp;lt;Alt&amp;gt;Escape']&#xA;org.gnome.desktop.wm.keybindings cycle-windows-backward ['&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Escape']&#xA;org.gnome.desktop.wm.keybindings lower @as []&#xA;org.gnome.desktop.wm.keybindings maximize @as []&#xA;org.gnome.desktop.wm.keybindings maximize-horizontally @as []&#xA;org.gnome.desktop.wm.keybindings maximize-vertically @as []&#xA;org.gnome.desktop.wm.keybindings minimize ['&amp;lt;Super&amp;gt;h']&#xA;org.gnome.desktop.wm.keybindings move-to-center @as []&#xA;org.gnome.desktop.wm.keybindings move-to-corner-ne @as []&#xA;org.gnome.desktop.wm.keybindings move-to-corner-nw @as []&#xA;org.gnome.desktop.wm.keybindings move-to-corner-se @as []&#xA;org.gnome.desktop.wm.keybindings move-to-corner-sw @as []&#xA;org.gnome.desktop.wm.keybindings move-to-monitor-down ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Down']&#xA;org.gnome.desktop.wm.keybindings move-to-monitor-left ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Left']&#xA;org.gnome.desktop.wm.keybindings move-to-monitor-right ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Right']&#xA;org.gnome.desktop.wm.keybindings move-to-monitor-up ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Up']&#xA;org.gnome.desktop.wm.keybindings move-to-side-e @as []&#xA;org.gnome.desktop.wm.keybindings move-to-side-n @as []&#xA;org.gnome.desktop.wm.keybindings move-to-side-s @as []&#xA;org.gnome.desktop.wm.keybindings move-to-side-w @as []&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-10 @as []&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-11 @as []&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-12 @as []&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-1 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;1', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;1']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-2 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;2', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;2']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-3 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;3', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;3']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-4 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;4', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;4']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-5 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;5', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;5']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-6 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;6', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;6']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-7 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;7', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;7']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-8 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;8', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;8']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-9 ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;9', '&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;9']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-down ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Page_Down', '&amp;lt;Control&amp;gt;&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Down']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-last ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;End']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-left ['&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;Left']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-right ['&amp;lt;Super&amp;gt;&amp;lt;Alt&amp;gt;Right']&#xA;org.gnome.desktop.wm.keybindings move-to-workspace-up ['&amp;lt;Super&amp;gt;&amp;lt;Shift&amp;gt;Page_Up', '&amp;lt;Control&amp;gt;&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Up']&#xA;org.gnome.desktop.wm.keybindings panel-main-menu ['&amp;lt;Super&amp;gt;space', '&amp;lt;Alt&amp;gt;F2']&#xA;org.gnome.desktop.wm.keybindings panel-run-dialog @as []&#xA;org.gnome.desktop.wm.keybindings raise @as []&#xA;org.gnome.desktop.wm.keybindings raise-or-lower @as []&#xA;org.gnome.desktop.wm.keybindings set-spew-mark @as []&#xA;org.gnome.desktop.wm.keybindings show-desktop ['&amp;lt;Super&amp;gt;Down', '&amp;lt;Super&amp;gt;s']&#xA;org.gnome.desktop.wm.keybindings switch-applications @as []&#xA;org.gnome.desktop.wm.keybindings switch-applications-backward @as []&#xA;org.gnome.desktop.wm.keybindings switch-group-backward ['&amp;lt;Shift&amp;gt;&amp;lt;Super&amp;gt;Above_Tab', '&amp;lt;Shift&amp;gt;&amp;lt;Alt&amp;gt;Above_Tab']&#xA;org.gnome.desktop.wm.keybindings switch-group ['&amp;lt;Super&amp;gt;Above_Tab', '&amp;lt;Alt&amp;gt;Above_Tab']&#xA;org.gnome.desktop.wm.keybindings switch-input-source @as []&#xA;org.gnome.desktop.wm.keybindings switch-input-source-backward @as []&#xA;org.gnome.desktop.wm.keybindings switch-panels-backward ['&amp;lt;Shift&amp;gt;&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Tab']&#xA;org.gnome.desktop.wm.keybindings switch-panels ['&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;Tab']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-10 @as []&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-11 @as []&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-12 @as []&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-1 ['&amp;lt;Super&amp;gt;1']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-2 ['&amp;lt;Super&amp;gt;2']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-3 ['&amp;lt;Super&amp;gt;3']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-4 ['&amp;lt;Super&amp;gt;4']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-5 ['&amp;lt;Super&amp;gt;5']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-6 ['&amp;lt;Super&amp;gt;6']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-7 ['&amp;lt;Super&amp;gt;7']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-8 ['&amp;lt;Super&amp;gt;8']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-9 ['&amp;lt;Super&amp;gt;9']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-down @as []&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-last ['&amp;lt;Super&amp;gt;End']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-left ['&amp;lt;Super&amp;gt;Left']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-right ['&amp;lt;Super&amp;gt;Right']&#xA;org.gnome.desktop.wm.keybindings switch-to-workspace-up @as []&#xA;org.gnome.desktop.wm.keybindings switch-windows ['&amp;lt;Alt&amp;gt;Tab']&#xA;org.gnome.desktop.wm.keybindings switch-windows-backward ['&amp;lt;Alt&amp;gt;&amp;lt;Shift&amp;gt;Tab']&#xA;org.gnome.desktop.wm.keybindings toggle-above @as []&#xA;org.gnome.desktop.wm.keybindings toggle-fullscreen @as []&#xA;org.gnome.desktop.wm.keybindings toggle-maximized ['&amp;lt;Super&amp;gt;Up']&#xA;org.gnome.desktop.wm.keybindings toggle-on-all-workspaces @as []&#xA;org.gnome.desktop.wm.keybindings toggle-shaded @as []&#xA;org.gnome.desktop.wm.keybindings unmaximize ['&amp;lt;Alt&amp;gt;F5']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Final Solution (Sort Of)&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;del&gt;I followed the suggestions from @Sebastian to edit the key settings and then lock them, but did so in a root shell, which seems to let the settings persist through reboots.&lt;/del&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow up - shortcuts don't persist through reboots anymore. But the shortcuts can be made to stick, at least temporarily, but editing the settings in a root shell, locking them, and then updating dconf via &lt;code&gt;dconf update&lt;/code&gt;. I'll probably just make a script to do this on startup for now until it gets fixed upstream.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastEditorUserId="15977" LastEditDate="2018-11-29T18:38:30.867" LastActivityDate="2018-11-29T18:38:30.867" Title="Keyboard Shortcuts Broken for Audio" Tags="|keyboard-shortcuts|audio|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17245" PostTypeId="2" ParentId="15703" CreationDate="2018-11-26T19:59:21.693" Score="0" Body="&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;The repository you tried to install on Loki doesn't support the version of Ubuntu Loki is based on&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Loki is based on Ubuntu 16.04 codename &lt;code&gt;xenial&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check in the future use:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To get your current ElementaryOS version codename&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;$ lsb_release -sc&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;for you should say &lt;code&gt;loki&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;To get the codename of Ubuntu's version which your version of ElementaryOS is based on&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;$ lsb_release -scu&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;for you should say &lt;code&gt;xenial&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Everytime you look for apps, check if supports Ubuntu 16.04&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Now the answer&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;There's at least three ways to remove a PPA: a manual way and two using some tools.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll present to you the easiest way:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install ppa-purge&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo ppa-purge ppa:nvbn-rm/ppa&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If it doesn't help / doesn't work, tell me and I'll try to explain another method to be able to remove it&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Opinion&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If you are looking for an Evernote client you should check this, maybe could help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/tusk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/tusk&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-26T19:59:21.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17246" PostTypeId="2" ParentId="17244" CreationDate="2018-11-26T20:16:05.040" Score="1" Body="&lt;h2&gt;Possible solution&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;go to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org &amp;gt; gnome &amp;gt; settings-daemon &amp;gt; plugins &amp;gt; media-keys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look after &lt;code&gt;volume-*&lt;/code&gt; related entries&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5T2yM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5T2yM.png&quot; alt=&quot;dconf-editor-volume-entries&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the proper values there and check again, maybe a relog or reboot could be useful to start clean after the change&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you want to use commands instead of &lt;code&gt;gconf-editor&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-down XF86AudioLowerVolume&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-up XF86AudioRaiseVolume&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys volume-mute XF86AudioMute&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To confirm/&lt;strong&gt;check&lt;/strong&gt; each key&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.gnome.settings-daemon.plugins.media-keys volume-down&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.gnome.settings-daemon.plugins.media-keys volume-up&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings get org.gnome.settings-daemon.plugins.media-keys volume-mute&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;List Current Media &amp;amp; Gnome Keymap&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings list-recursively  org.gnome.settings-daemon.plugins.media-keys | sort | more&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings list-recursively  org.gnome.desktop.wm.keybindings | sort | more&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Lock down specific settings&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.gnome.org/admin/system-admin-guide/stable/dconf-lockdown.html.en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.gnome.org/admin/system-admin-guide/stable/dconf-lockdown.html.en&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.gnome.org/admin/system-admin-guide/stable/desktop-background.html.en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.gnome.org/admin/system-admin-guide/stable/desktop-background.html.en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-29T04:34:45.963" LastActivityDate="2018-11-29T04:34:45.963" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="17247" PostTypeId="1" AcceptedAnswerId="17248" CreationDate="2018-11-26T23:37:02.167" Score="1" ViewCount="1652" Body="&lt;p&gt;How to enable right-click and icons on desktop for Juno?&#xA;Previous version guides doesn't work. Please,bro&lt;/p&gt;&#xA;" OwnerUserId="16504" LastEditorUserId="14940" LastEditDate="2018-11-30T20:04:27.753" LastActivityDate="2018-11-30T20:04:27.753" Title="Right-click desktop Juno?" Tags="|release-juno|desktop|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-06T06:42:15.753" ContentLicense="CC BY-SA 4.0" />
  <row Id="17248" PostTypeId="2" ParentId="17247" CreationDate="2018-11-26T23:52:40.363" Score="0" Body="&lt;p&gt;This question has been asked previously. Try the solution provided here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15915/how-enable-desktop-icons-on-elementaryos-5-0-juno&quot;&gt;How enable desktop icons on elementaryOS 5.0 Juno?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-26T23:52:40.363" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17249" PostTypeId="2" ParentId="14985" CreationDate="2018-11-27T04:54:28.390" Score="1" Body="&lt;p&gt;I don't know If you are still around. I never done this but I just gathered info I believe might help you&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You need to install Nvidia drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install software-properties-gtk software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Then use the command:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo ubuntu-drivers list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should get something like this (probably different version numbers):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-304&#xA;nvidia-340&#xA;intel-microcode&#xA;nvidia-367&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt; &lt;code&gt;nvidia-367&lt;/code&gt; (or the version you want, and could be different)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install nvidia-367 nvidia-settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://gist.github.com/Jiab77/d3344422ee6d334f284425b558dc572c&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/Jiab77/d3344422ee6d334f284425b558dc572c&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Final step&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Open:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ software-properties-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Choose&lt;/strong&gt; the tab &lt;code&gt;Additional Drivers&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Wait&lt;/strong&gt; for the  loading list, and then &lt;strong&gt;you should see the recently installed driver&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Select&lt;/strong&gt; it and &lt;strong&gt;reboot&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4XqRz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4XqRz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, after reboot, &lt;strong&gt;open&lt;/strong&gt; &lt;code&gt;$ nvidia-settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Look after&lt;/strong&gt; an entry named &lt;code&gt;PRIME Profiles&lt;/code&gt;, &lt;strong&gt;select&lt;/strong&gt; it and then &lt;strong&gt;choose&lt;/strong&gt; the NVIDIA GPU&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7oaML.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7oaML.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reboot&lt;/strong&gt; again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Done&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Additional Info&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You can also check and change PRIME using a command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install nvidia-prime&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To check&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select query&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To select Intel GPU as PRIME&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select intel&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To select NVIDIA GPU as PRIME&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select nvidia&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://www.linuxbabe.com/desktop-linux/switch-intel-nvidia-graphics-card-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxbabe.com/desktop-linux/switch-intel-nvidia-graphics-card-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-27T04:54:28.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17250" PostTypeId="2" ParentId="15905" CreationDate="2018-11-27T06:28:10.147" Score="1" Body="&lt;p&gt;This thing was very annoying to me and I decided to create this simple native wing-panel indicator. It is not perfect but it works very well and I'm still improving, you can try it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/isneezy/wingpanel-indicator-dropbox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/isneezy/wingpanel-indicator-dropbox&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/p2llB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/p2llB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8524" LastActivityDate="2018-11-27T06:28:10.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17251" PostTypeId="2" ParentId="14366" CreationDate="2018-11-27T06:39:46.527" Score="1" Body="&lt;p&gt;Besides Paulo's solution, you can make any folder become the folder of Photos, Documents, Downloads, etc. Just change the &lt;code&gt;~/.config/user-dirs.dirs&lt;/code&gt; file according to your needs.&#xA;This is how the file looks like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# This file is written by xdg-user-dirs-update&#xA;# If you want to change or add directories, just edit the line you're&#xA;# interested in. All local changes will be retained on the next run.&#xA;# Format is XDG_xxx_DIR=&quot;$HOME/yyy&quot;, where yyy is a shell-escaped&#xA;# homedir-relative path, or XDG_xxx_DIR=&quot;/yyy&quot;, where /yyy is an&#xA;# absolute path. No other format is supported.&#xA;XDG_DOWNLOAD_DIR=&quot;$HOME/Downloads&quot;&#xA;XDG_TEMPLATES_DIR=&quot;$HOME/Templates&quot;&#xA;XDG_PUBLICSHARE_DIR=&quot;$HOME/Public&quot;&#xA;XDG_DOCUMENTS_DIR=&quot;$HOME/Documents&quot;&#xA;XDG_MUSIC_DIR=&quot;$HOME/Music&quot;&#xA;XDG_PICTURES_DIR=&quot;$HOME/Pictures&quot;&#xA;XDG_VIDEOS_DIR=&quot;$HOME/Videos&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8524" LastActivityDate="2018-11-27T06:39:46.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17252" PostTypeId="2" ParentId="16711" CreationDate="2018-11-27T07:43:19.190" Score="1" Body="&lt;p&gt;I don't think the feature exists in Code yet. However, a simple workaround is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Right-click the folder / project, select &quot;Open in&quot; &gt; &quot;Terminal&quot;&lt;/li&gt;&#xA;&lt;li&gt;Type in the command: &lt;code&gt;grep -Ril &quot;text to search for&quot; .&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;That will list all the files containing that text. Some notes:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;.&lt;/code&gt; Means search from the current folder&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;-R&lt;/code&gt; Searches recursively, not just files in the current folder&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;-i&lt;/code&gt; Searches case-insensitively&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;-l&lt;/code&gt; Prints just the file names, not showing the line of text it's in&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; If you want to then open the files in Code, add &lt;code&gt;`pwd`&lt;/code&gt; to the end, which will print out the full paths of the files. Then use the names like &lt;code&gt;io.elementary.code filename&lt;/code&gt; to open it in Code.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you need to find files with a particular name, you can use the same method to open the folder in Terminal, then run the following command:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;find . -name '*part of name*' -print&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If &quot;part of name&quot; is for example &quot;list&quot;, that will match files named &quot;todo list.txt&quot;. You can also use the following flags:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;-type d&lt;/code&gt; To search for only directories (folders)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;-type f&lt;/code&gt; To search for only files&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="100" LastEditorUserId="100" LastEditDate="2018-11-27T08:00:06.747" LastActivityDate="2018-11-27T08:00:06.747" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17254" PostTypeId="1" CreationDate="2018-11-27T08:06:25.773" Score="1" ViewCount="268" Body="&lt;p&gt;When working on web dev projects, we work with many file formats, some of which aren't recognised by Code, such as &lt;em&gt;.twig&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to add support for these?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not, is there a way to treat all files with that extension as a particular language (eg. HTML)?&lt;/p&gt;&#xA;" OwnerUserId="100" LastEditorUserId="100" LastEditDate="2018-11-28T12:49:42.967" LastActivityDate="2019-04-27T19:01:00.940" Title="How to add support for additional coding languages?" Tags="|release-juno|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17255" PostTypeId="2" ParentId="17213" CreationDate="2018-11-27T08:13:16.253" Score="1" Body="&lt;p&gt;For Juno:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1)&lt;/strong&gt; Install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; Run &lt;code&gt;dconf-editor&lt;/code&gt; and go to &lt;code&gt;/io/elementary/desktop/cerbere/monitored-processes&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; Uncheck &lt;code&gt;&quot;Use default value&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4)&lt;/strong&gt; Remove &lt;code&gt;'Wingpanel'&lt;/code&gt; in Custom Value&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;5)&lt;/strong&gt; Log out and then log back in. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do this, I highly recommend adding the application menu to Plank:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1)&lt;/strong&gt; Hold &lt;kbd&gt;Ctrl&lt;/kbd&gt; and alternate-click anywhere on the Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; Select &lt;code&gt;Preferences.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; Click the &lt;code&gt;Docklets&lt;/code&gt; tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4)&lt;/strong&gt; Double-click &lt;code&gt;Applications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can access your applications without the Wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To have wingpanel start automatically again, either select &lt;code&gt;&quot;Use default value&quot;&lt;/code&gt; or put &lt;code&gt;'wingpanel'&lt;/code&gt; back into the Custom Value in dconf-editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To start wingpanel manually, open a terminal and type &lt;code&gt;wingpanel&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what the edited dconf window should look like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6YPJC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6YPJC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what my desktop looks like without the Wingpanel. It also has the Application Menu on the Plank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vDOlH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vDOlH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2019-01-28T00:48:55.953" LastActivityDate="2019-01-28T00:48:55.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17256" PostTypeId="1" CreationDate="2018-11-27T09:07:33.617" Score="1" ViewCount="603" Body="&lt;p&gt;What keyboard shortcuts are available for actions like manipulating files and directories / projects, manipulating code / text, showing / hiding features, etc.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2019-05-14T11:57:29.373" Title="What keyboard shortcuts are available in Code?" Tags="|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17257" PostTypeId="2" ParentId="17256" CreationDate="2018-11-27T09:07:33.617" Score="2" Body="&lt;p&gt;The ones I could find so far:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Z&lt;/kbd&gt; / &lt;kbd&gt;O&lt;/kbd&gt; / &lt;kbd&gt;C&lt;/kbd&gt; / &lt;kbd&gt;X&lt;/kbd&gt; / &lt;kbd&gt;V&lt;/kbd&gt; / &lt;kbd&gt;W&lt;/kbd&gt; / &lt;kbd&gt;Q&lt;/kbd&gt; All do the same as in every other app&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;/&lt;/kbd&gt; Comment the line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;I&lt;/kbd&gt; Go to line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; Open new blank tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;N&lt;/kbd&gt; Also open new blank tab&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;R&lt;/kbd&gt; Search and replace&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; Also search and replace&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; Duplicate line&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;.&lt;/kbd&gt; Insert emoticon&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;\&lt;/kbd&gt; Toggle sidebar&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; Open last-closed tab&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt; Save as&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt; Switch between code and the terminal (when open)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="100" LastActivityDate="2018-11-27T09:07:33.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17259" PostTypeId="2" ParentId="14901" CreationDate="2018-11-27T09:24:27.863" Score="0" Body="&lt;p&gt;Here's Daniel Foré, the founder of elementary, on screensavers (see this bug):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the general consensus, last time it was discussed, was that it was better to just turn the display off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As stated before, the periodic table has nothing to do with our brand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm leaning towards this being a won't fix. Screensavers are kind of an outdated concept, IMO&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-11-27T09:24:27.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17262" PostTypeId="1" CreationDate="2018-11-27T13:22:46.973" Score="0" ViewCount="61" Body="&lt;p&gt;So where do I put this rule? Can I do it with Network manager GUI application? If so how do I do it?&lt;/p&gt;&#xA;" OwnerUserId="16511" LastActivityDate="2019-08-25T16:01:25.173" Title="Where do I put - in which file, to persist routing rule (sudo ip r a IP via 192.168.1.1) on reboot,I just added?" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17265" PostTypeId="2" ParentId="15905" CreationDate="2018-11-27T15:59:34.587" Score="1" Body="&lt;p&gt;the &quot;problem&quot; is Wingpanel-indicator-ayatana.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;see this: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17211/elementary-os-5-0-and-hardware-sensors-indicator/17216#17216&quot;&gt;Elementary OS 5.0 and Hardware Sensors Indicator&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is applicable to almost all wingpanel &quot;problems&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is because the creators of elementary os think bigger than steam, dropbox, skype, mega, &quot;several famous applications commonly used by users&quot;, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a nice day.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-27T15:59:34.587" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17266" PostTypeId="2" ParentId="17201" CreationDate="2018-11-27T16:23:11.547" Score="2" Body="&lt;p&gt;you can modify that panel in apps.css&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo io.elementary.code /usr/share/themes/elementary/gtk-3.0/apps.css&lt;/p&gt;&#xA;&#xA;&lt;p&gt;search &lt;code&gt;/*********&#xA;        * Panel *&#xA;        ********/&lt;/code&gt;and modify what you want to change Colors, transparency. # 000 is color and 0.0 is transparency.&#xA;I recommend you to be very careful since you can break something, also so that you know about how to modify things look for hex codes for colors.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-27T16:23:11.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17268" PostTypeId="2" ParentId="17262" CreationDate="2018-11-27T16:58:42.443" Score="1" Body="&lt;p&gt;Base on your question I have to assume you are using &lt;code&gt;juno&lt;/code&gt;, and &lt;code&gt;juno&lt;/code&gt; is based on Ubuntu 18.04&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Haven't configure any route rule but I've read that Ubuntu 18.04 uses &lt;code&gt;netplan&lt;/code&gt; &lt;a href=&quot;https://netplan.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://netplan.io/&lt;/a&gt; and no more &lt;code&gt;/etc/network/interface&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JgUUG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JgUUG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe reading the following links could help you&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://blog.ubuntu.com/2017/12/01/ubuntu-bionic-netplan&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.ubuntu.com/2017/12/01/ubuntu-bionic-netplan&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://netplan.io/examples#source-routing&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://netplan.io/examples#source-routing&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2378969&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2378969&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-27T16:58:42.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17269" PostTypeId="2" ParentId="17254" CreationDate="2018-11-27T17:06:26.200" Score="2" Body="&lt;p&gt;I really don't know&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should ask in their Github page&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/code/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe ask for this new feature or some info on where to write the syntax definition...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;(time:1543427125)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the downvote, you made me learn a new thing. I followed my own suggestion and went to their Github page (as I said could be the best way to get an answer) and looked for people asking for new language support. Normal stuff right?. Found a post of a person asking for &quot;&lt;em&gt;Language Support for Ren'Py&lt;/em&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/code/issues/467&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/issues/467&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There, a person who has the know-how of &lt;a href=&quot;/questions/tagged/code&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;code&amp;#39;&quot; rel=&quot;tag&quot;&gt;code&lt;/a&gt;'s environment, told him and us that &lt;a href=&quot;/questions/tagged/code&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;code&amp;#39;&quot; rel=&quot;tag&quot;&gt;code&lt;/a&gt; uses &lt;code&gt;gtksourceview&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I went to the old &lt;a href=&quot;https://www.google.com/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Google&quot;&gt;Google&lt;/a&gt;, searched for &lt;code&gt;&quot;twig gtksourceview&quot;&lt;/code&gt; and found this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://twig.symfony.com/doc/2.x/templates.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://twig.symfony.com/doc/2.x/templates.html&lt;/a&gt; (I believe this is the Official website of the language?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If we look for &lt;code&gt;gtksourceview&lt;/code&gt; we find&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://twig.symfony.com/doc/2.x/templates.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://twig.symfony.com/doc/2.x/templates.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;,that leads us to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/gabrielcorpse/gedit-twig-template-language&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/gabrielcorpse/gedit-twig-template-language&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Next&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To add support to others just repeat:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to the official website and look for their gtksourceview template&#xA;format file, if they don't have a template made, look for it in &lt;a href=&quot;https://www.google.com/&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Google&quot;&gt;Google&lt;/a&gt; and if all goes wrong you just can edit/create one yourself. (see below for format definition)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create it or download it&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save it in your system where it should (see below)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Profit&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Where to save it?&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;User&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;~/.local/share/gtksourceview-3.0/language-specs/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System-wide&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/usr/share/gtksourceview-3.0/language-specs/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Format&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://developer.gnome.org/gtksourceview/stable/lang-reference.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.gnome.org/gtksourceview/stable/lang-reference.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-28T17:46:20.803" LastActivityDate="2018-11-28T17:46:20.803" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17271" PostTypeId="2" ParentId="17195" CreationDate="2018-11-27T18:34:14.270" Score="1" Body="&lt;p&gt;try this in terminal: sudo modprobe snd-hda-intel, if you recover audio, add snd-hda-intel to file /etc/modules. This will make the snd-hda-intel module load up  at boot time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use: sudo sh -c 'echo &quot;snd-hda-intel&quot; &gt;&gt; /etc/modules' to do this&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-11-27T18:34:14.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17272" PostTypeId="2" ParentId="17222" CreationDate="2018-11-27T19:06:35.733" Score="1" Body="&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Let's check if you have Nvidia drivers installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install software-properties-gtk software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Open:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ software-properties-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Choose&lt;/strong&gt; the tab &lt;code&gt;Additional Drivers&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Wait&lt;/strong&gt; for the  loading list, and then &lt;strong&gt;you should see the installed drivers&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4XqRz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4XqRz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't see any NVIDIA proprietary driver in the list, you need to install them&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you see them, just choose it and then reboot to start clean&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To install the driver&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Use the command:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo ubuntu-drivers list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should get something like this (probably different version numbers):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-304&#xA;nvidia-340&#xA;intel-microcode&#xA;nvidia-367&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt; &lt;code&gt;nvidia-367&lt;/code&gt; (or the version you want/need, and could be different)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install nvidia-367 nvidia-settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then and again you have to choose the driver&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Open:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ software-properties-gtk&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Choose&lt;/strong&gt; the tab &lt;code&gt;Additional Drivers&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Wait&lt;/strong&gt; for the  loading list, and then &lt;strong&gt;you should see the installed drivers&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4XqRz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4XqRz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just choose the driver in the list and then reboot to start clean&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://gist.github.com/Jiab77/d3344422ee6d334f284425b558dc572c&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/Jiab77/d3344422ee6d334f284425b558dc572c&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, after reboot, &lt;strong&gt;open&lt;/strong&gt; &lt;code&gt;$ nvidia-settings&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Look after&lt;/strong&gt; an entry named &lt;code&gt;PRIME Profiles&lt;/code&gt;, &lt;strong&gt;select&lt;/strong&gt; it and then &lt;strong&gt;choose&lt;/strong&gt; the NVIDIA GPU&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7oaML.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7oaML.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reboot&lt;/strong&gt; again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now try open a video&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;mpv&lt;/code&gt; (If you don't have it install it with &lt;code&gt;sudo apt install mpv&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Play the video with the command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mpv -v filename.mp4&lt;/code&gt; (or mkv,avi, etc)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case the error continues, just copy and paste the text in the terminal. It will be a lot because of the &lt;code&gt;-v&lt;/code&gt; flag.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Additional Info&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You can also check and change PRIME using a command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt install nvidia-prime&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To check&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select query&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To select Intel GPU as PRIME&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select intel&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To select NVIDIA GPU as PRIME&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo prime-select nvidia&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://www.linuxbabe.com/desktop-linux/switch-intel-nvidia-graphics-card-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxbabe.com/desktop-linux/switch-intel-nvidia-graphics-card-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Also for future reference in case the answer doesn't work&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo lshw -sanitize -class system,processor,display,multimedia&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;copy the output and paste it here editing your own post&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-27T19:06:35.733" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17273" PostTypeId="1" AcceptedAnswerId="17274" CreationDate="2018-11-27T21:48:22.220" Score="0" ViewCount="90" Body="&lt;p&gt;I have one of my keys mapped to XF86Refresh which I confirmed with &lt;code&gt;xev&lt;/code&gt;. In Firefox and Epiphany pressing the key works as expected, but in Chrome it acts like &lt;code&gt;CTRL + F&lt;/code&gt;. Here's what &lt;code&gt;xev&lt;/code&gt; says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;KeyPress event, serial 38, synthetic NO, window 0x3c00001,&#xA;root 0x173, subw 0x3c00002, time 6983238, (27,11), root:(898,478),&#xA;state 0x0, keycode 69 (keysym 0x1008ff29, XF86Refresh), same_screen YES,&#xA;XLookupString gives 0 bytes: &#xA;XmbLookupString gives 0 bytes: &#xA;XFilterEvent returns: False&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gfycat.com/SecondhandDizzyHapuku&quot; rel=&quot;nofollow noreferrer&quot;&gt;Video showing issue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-11-27T23:02:39.343" Title="XF86Refresh Doesn't Map Correctly in Chrome" Tags="|keyboard-shortcuts|google-chrome|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17274" PostTypeId="2" ParentId="17273" CreationDate="2018-11-27T22:28:57.407" Score="0" Body="&lt;p&gt;First... I don't know how to map keys, never needed it. You should write the next time detailed info of what you did.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why you use &lt;code&gt;XF86Refresh&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've read that is better to use &lt;code&gt;XF86Reload&lt;/code&gt; instead&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=10751&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.freedesktop.org/show_bug.cgi?id=10751&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://blogs.gnome.org/sudaltsov/2008/12/24/consolidation/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blogs.gnome.org/sudaltsov/2008/12/24/consolidation/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You should try and test if that helps you, looks like it was a consolidation a while ago&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-11-27T22:39:11.027" LastActivityDate="2018-11-27T22:39:11.027" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17275" PostTypeId="2" ParentId="17273" CreationDate="2018-11-27T23:02:39.343" Score="0" Body="&lt;p&gt;Following what @Sebastian suggested, I remapped the key in question to &lt;code&gt;XF86Reload&lt;/code&gt;. Reloading a page in Chrome works fine now, and still works in Epiphany, but broke in Firefox. Since I don't use Firefox too much, and since &lt;code&gt;CTRL + R&lt;/code&gt; still works fine, this solution is workable for me.&lt;/p&gt;&#xA;" OwnerUserId="15977" LastActivityDate="2018-11-27T23:02:39.343" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17276" PostTypeId="1" AcceptedAnswerId="17277" CreationDate="2018-11-28T00:45:30.653" Score="1" ViewCount="1034" Body="&lt;p&gt;I noticed that after upgrading from Loki to Juno my battery life was severally decreased. &#xA;I have a Dell XPS 9550 with a NVIDI GeForce(R) GTX 960M. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I've installed &lt;code&gt;tlp&lt;/code&gt; and &lt;code&gt;tlp-rdw&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;I've addded the nvidia graphics drivers ppa: &lt;code&gt;ppa:graphics-drivers/ppa&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;I'm using nvidia-driver-...&lt;/li&gt;&#xA;&lt;li&gt;I've installed all the recent updates&lt;/li&gt;&#xA;&lt;li&gt;I've switched to &lt;code&gt;intel&lt;/code&gt; using &lt;code&gt;prime-select&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I noticed however when checking powertop Tunables, when running from battery the following item:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bad           Runtime PM for PCI Device NVIDIA Corporation GM107M [GeForce GTX 960M]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also noticed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The battery reports a discharge rate of 20.9 W&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I switched the NVIDIA item from bad to good I got:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The battery reports a discharge rate of 12.4 W&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which is quite a significant drop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this possible related question, but the issue seems solved and should have been back-ported to Ubuntu 18.04 already.&lt;br&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1037977/optimus-nvidia-gpu-turned-on-whatever-prime-select-says/1045767?noredirect=1#comment1799551_1045767&quot;&gt;https://askubuntu.com/questions/1037977/optimus-nvidia-gpu-turned-on-whatever-prime-select-says/1045767?noredirect=1#comment1799551_1045767&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Questions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Why would the NVIDIA card still use power even though I selected Intel?&lt;/li&gt;&#xA;&lt;li&gt;Is there a better way to disable it?&lt;/li&gt;&#xA;&lt;li&gt;Is there an easy way to make this powertop tune permanent?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-11-28T00:56:45.723" LastActivityDate="2018-11-29T13:43:36.463" Title="Power usage NVIDIA on Juno" Tags="|nvidia|power|battery|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17277" PostTypeId="2" ParentId="17276" CreationDate="2018-11-28T00:55:57.617" Score="1" Body="&lt;p&gt;&lt;strong&gt;Update: Augustin found a better approach for using a SystemD service:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One option to make this powertop tune permanent:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Copy the command powertop executes when switching the nvidia tunable from bad to good. In my case that was:&lt;br&gt;&#xA;&lt;code&gt;/bin/echo auto &amp;gt; /sys/bus/pci/devices/0000:02:00.0/power/control&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add a SystemD service that executes that command: create:&lt;br&gt;&#xA;&lt;code&gt;/etc/systemd/system/nvidia-power-control.service&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Fill with:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=NVIDIA automatic power control&#xA;[Service]&#xA;Type=oneshot&#xA;ExecStart=/bin/sh -c '/bin/echo auto &amp;gt; /sys/bus/pci/devices/0000:02:00.0/power/control'&#xA;KillMode=none&#xA;[Install]&#xA;WantedBy=multi-user.target      &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Make sure the command inside the &lt;code&gt;/bin/sh -c ''&lt;/code&gt; is the copied command.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run: &lt;code&gt;systemctl daemon-reload&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run: &lt;code&gt;systemctl enable nvidia-power-control&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run: &lt;code&gt;systemctl start nvidia-power-control&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Verify it's running:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ systemctl status nvidia-power-control&#xA;● nvidia-power-control.service - NVIDIA automatic power control&#xA;   Loaded: loaded (/etc/systemd/system/nvidia-power-control.service; enabled; vendor preset: enabled)&#xA;   Active: inactive (dead) since Thu 2018-11-29 14:21:20 CET; 6s ago&#xA;  Process: 28759 ExecStart=/bin/sh -c /bin/echo auto &amp;gt; /sys/bus/pci/devices/0000:02:00.0/power/control (code=exited, status=0/S&#xA; Main PID: 28759 (code=exited, status=0/SUCCESS)&#xA;&#xA;nov 29 14:21:20 xps systemd[1]: Starting NVIDIA automatic power control...&#xA;nov 29 &#xA;14:21:20 xps systemd[1]: Started NVIDIA automatic power control.&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;For me this made sure the powertop tunables always indicates good for the Nvidia card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please tell me if there is an easier way to do this. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-11-29T13:43:36.463" LastActivityDate="2018-11-29T13:43:36.463" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17278" PostTypeId="1" CreationDate="2018-11-28T07:37:44.983" Score="2" ViewCount="840" Body="&lt;p&gt;What values should the &quot;From&quot; and &quot;To&quot; fields have in manual mode to run it for the whole day?&#xA;I tried 12:00AM to 12:00AM which did not work. I then tried 12:00AM to 11:59PM, but the &quot;To&quot; field keeps resetting back to 11:00PM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Looks like this was reported long back, but no action taken so far &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-nightlight/issues/32&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-nightlight/issues/32&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15104" LastEditorUserId="15904" LastEditDate="2018-11-30T20:24:52.063" LastActivityDate="2018-12-31T01:01:25.283" Title="How to configure nightlight to run for the whole day?" Tags="|switchboard|nightlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17280" PostTypeId="2" ParentId="17201" CreationDate="2018-11-28T08:11:12.230" Score="0" Body="&lt;p&gt;I think the new &lt;code&gt;dconf-editor&lt;/code&gt; location you're looking for is &lt;code&gt;/io/elementary/desktop/wingpanel&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncheck &lt;code&gt;use-transparency&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JKf4t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JKf4t.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-28T08:11:12.230" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17283" PostTypeId="2" ParentId="16381" CreationDate="2018-11-28T17:04:32.693" Score="1" Body="&lt;p&gt;Yes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1)&lt;/strong&gt; Boot (or reboot) and hold down the &lt;kbd&gt;Shift&lt;/kbd&gt; key. You should get a screen like the one below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/520TX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/520TX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; Select &lt;code&gt;*Advanced options for elementary&lt;/code&gt;.  Now you should get a screen like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vrIuk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vrIuk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; Select recovery mode.  Now you should see this screen:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GqiNz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GqiNz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4)&lt;/strong&gt; Select &lt;code&gt;root&lt;/code&gt;. Now you will see &lt;code&gt;Press Enter for maintenance (or press Control-D to continue)&lt;/code&gt;. Press &lt;kbd&gt;Enter&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;5)&lt;/strong&gt; The system will be read-only so you need to make it read-write.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -o remount rw /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;6)&lt;/strong&gt;  Now reset your password:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;root@elementaryOS:~# passwd &amp;lt;username&amp;gt;&#xA;Enter new UNIX password:&#xA;Retype new UNIX password:&#xA;passwd: password updated successfully&#xA;root@elementaryOS:~#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;7) Reboot: &lt;code&gt;shutdown -r now&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-28T17:15:58.253" LastActivityDate="2018-11-28T17:15:58.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17284" PostTypeId="2" ParentId="17278" CreationDate="2018-11-28T17:26:30.767" Score="1" Body="&lt;p&gt;I see what you're talking about. It &lt;em&gt;seems&lt;/em&gt; like it's resetting back to 11:00 PM, but once you click off the time setting, it should be set to 11:59 PM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&#xA;After clarifying things with Rajiv, this does appear to be a bug.  After setting to 11:59 PM, closing the Settings window and re-opening, the time reverts to 11:00 PM. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the elementary OS github page and there is a request to use Night Light all day:&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-nightlight/issues/32&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-nightlight/issues/32&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updated demo of the issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2Bzhb.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Bzhb.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-11-29T17:28:35.803" LastActivityDate="2018-11-29T17:28:35.803" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17287" PostTypeId="1" AcceptedAnswerId="17289" CreationDate="2018-11-28T19:15:41.820" Score="1" ViewCount="551" Body="&lt;p&gt;After &lt;code&gt;npm install -g @angular/cli&lt;/code&gt; this is what I recive:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;npm WARN optional Skipping failed optional dependency /@angular/cli/chokidar/fsevents:&#xA;npm WARN notsup Not compatible with your operating system or architecture: fsevents@1.2.4&#xA;npm ERR! Linux 4.15.0-38-generic&#xA;npm ERR! argv &quot;/usr/bin/node&quot; &quot;/usr/bin/npm&quot; &quot;install&quot; &quot;-g&quot; &quot;@angular/cli&quot;&#xA;npm ERR! node v8.10.0&#xA;npm ERR! npm  v3.5.2&#xA;npm ERR! path /usr/local/lib&#xA;npm ERR! code EACCES&#xA;npm ERR! errno -13&#xA;npm ERR! syscall access&#xA;&#xA;npm ERR! Error: EACCES: permission denied, access '/usr/local/lib'&#xA;npm ERR!  { Error: EACCES: permission denied, access '/usr/local/lib'&#xA;npm ERR!   errno: -13,&#xA;npm ERR!   code: 'EACCES',&#xA;npm ERR!   syscall: 'access',&#xA;npm ERR!   path: '/usr/local/lib' }&#xA;npm ERR! &#xA;npm ERR! Please try running this command again as root/Administrator.&#xA;&#xA;npm ERR! Please include the following file with any support request:&#xA;npm ERR!     /home/ipaulbogdan/npm-debug.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16519" LastEditorUserId="15904" LastEditDate="2018-11-29T11:37:16.553" LastActivityDate="2019-03-10T20:10:20.013" Title="Cannot install angular on elementary os!" Tags="|system-installation|web-development|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17288" PostTypeId="1" CreationDate="2018-11-28T19:24:06.790" Score="1" ViewCount="380" Body="&lt;pre&gt;&lt;code&gt;systemd-analyze blame&#xA;           630ms ufw.service&#xA;           405ms dev-sda2.device&#xA;           354ms systemd-logind.service&#xA;           350ms pantheon-parental-controls.service&#xA;           244ms udisks2.service&#xA;           231ms lightdm.service&#xA;           230ms plymouth-quit-wait.service&#xA;           199ms upower.service&#xA;           193ms systemd-udev-trigger.service&#xA;           171ms NetworkManager.service&#xA;           171ms systemd-rfkill.service&#xA;           162ms systemd-hostnamed.service&#xA;           156ms systemd-journal-flush.service&#xA;           150ms networkd-dispatcher.service&#xA;           148ms systemd-localed.service&#xA;           143ms apparmor.service&#xA;           139ms gpu-manager.service&#xA;           137ms systemd-timesyncd.service&#xA;           133ms systemd-resolved.service&#xA;           120ms keyboard-setup.service&#xA;           100ms ModemManager.service&#xA;            95ms swapfile.swap&#xA;            94ms accounts-daemon.service&#xA;            94ms grub-common.service&#xA;            75ms thermald.service&#xA;            66ms speech-dispatcher.service&#xA;            62ms systemd-timedated.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My startup finished in 6.064s (firmware) + 5.632s (loader) + 4.799s (kernel) + 1.391s (userspace) = 17.888s&#xA;graphical.target reached after 1.382s in userspace&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, is the firewall really necessary? I'll be mostly working while connected to my home WiFi and some Python studies at Cafés(public WiFi) etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Mqv8h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mqv8h.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16413" LastEditorUserId="16413" LastEditDate="2018-11-29T10:38:28.180" LastActivityDate="2023-04-08T03:09:56.160" Title="Is there any processes that I can disable to shorten the booting time?" Tags="|release-loki|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17289" PostTypeId="2" ParentId="17287" CreationDate="2018-11-28T20:47:46.930" Score="1" Body="&lt;p&gt;From &lt;a href=&quot;https://www.npmjs.com/package/@angular/cli#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.npmjs.com/package/@angular/cli#installation&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Install Globablly&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;npm install -g @angular/cli&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install Locally&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;npm install @angular/cli&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;In Linux, every time you install something, when that something is Global means you need root access and when something is Local just with your user is enough&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;To translate that into commands&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Global&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo npm install -g @angular/cli&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Local&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;npm install @angular/cli&lt;/code&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;&lt;em&gt;&lt;strong&gt;Permission Denied&lt;/strong&gt;&lt;/em&gt;&lt;/h2&gt;&#xA;&lt;p&gt;You can see what is the problem clearly in the log&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;npm ERR! Error: EACCES: permission denied, access '/usr/local/lib'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Probably the installer wants to write there but can's because only the &lt;code&gt;root&lt;/code&gt; user can&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-11-28T20:47:46.930" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17290" PostTypeId="2" ParentId="17288" CreationDate="2018-11-28T20:49:32.200" Score="1" Body="&lt;p&gt;The only service/daemon I see in your list you could disable safely is&#xA;&lt;code&gt;pantheon-parental-controls.service&lt;/code&gt;... in case you're an adult :P&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure about the firewall service, maybe is needed elsewhere. It needs more research.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway is better to use this command not the one you used&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemd-anaylze plot &amp;gt; boot.svg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, then upload boot.svg that way we can see which service is really slowing down your machine, and of course one you don't need and is safe to disable.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Use at your own risk&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;disable&lt;/strong&gt; a service&#xA;&lt;code&gt;sudo systemctl disable &amp;lt;service-name.service&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;enable&lt;/strong&gt; a service&#xA;&lt;code&gt;sudo systemctl enable &amp;lt;service-name.service&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-28T20:49:32.200" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17291" PostTypeId="2" ParentId="17276" CreationDate="2018-11-28T21:23:35.977" Score="0" Body="&lt;p&gt;I would like to provide alternative way to make PowerTop tune permanent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;// According to Ubuntu ManPage rc.local is now provided for backward compatibility and shouldn't be used unless it's not necessary.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;// A proper way is probably to use a particular unit file. See Peter's answer.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also &lt;strong&gt;/etc/rc.local&lt;/strong&gt; can be used to achieve this.&#xA;When this file exists it's being executed automatically during late boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more info about rc.local see:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://manpages.ubuntu.com/manpages/bionic/man8/systemd-rc-local-generator.8.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://manpages.ubuntu.com/manpages/bionic/man8/systemd-rc-local-generator.8.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1. Create /etc/rc.local file&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/rc.local&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2. Write the script&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh -e&#xA;#&#xA;# rc.local&#xA;#&#xA;# This script is executed at the end of each multiuser runlevel.&#xA;# Make sure that the script will &quot;exit 0&quot; on success or any other&#xA;# value on error.&#xA;#&#xA;# In order to enable or disable this script just change the execution&#xA;# bits.&#xA;#&#xA;# By default this script does nothing.&#xA;&#xA;echo auto &amp;gt; /sys/bus/pci/devices/0000:01:00.0/power/control&#xA;&#xA;exit 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://hastebin.com/yurufehezi.bash&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hastebin.com/yurufehezi.bash&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3. Make it executable&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /etc/rc.local&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4. Reboot your machine&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that systemd rc-local.service is available and loaded:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ systemctl status rc-local.service &#xA;● rc-local.service - /etc/rc.local Compatibility&#xA;   Loaded: loaded (/lib/systemd/system/rc-local.service; enabled-runtime; vendo&#xA;  Drop-In: /lib/systemd/system/rc-local.service.d&#xA;           └─debian.conf&#xA;   Active: active (exited) since Tue 2018-11-27 14:36:30 CET; 1 day 7h ago&#xA;     Docs: man:systemd-rc-local-generator(8)&#xA;    Tasks: 0 (limit: 4915)&#xA;   CGroup: /system.slice/rc-local.service&#xA;&#xA;lis 27 14:36:30 elementaryNix systemd[1]: Starting /etc/rc.local Compatibility.&#xA;lis 27 14:36:30 elementaryNix rc.local[1229]: Enabled persistence mode for GPU &#xA;lis 27 14:36:30 elementaryNix rc.local[1229]: All done.&#xA;lis 27 14:36:30 elementaryNix systemd[1]: Started /etc/rc.local Compatibility.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16372" LastEditorUserId="16372" LastEditDate="2018-11-29T13:26:49.883" LastActivityDate="2018-11-29T13:26:49.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17292" PostTypeId="1" CreationDate="2018-11-28T22:29:44.617" Score="0" ViewCount="6460" Body="&lt;p&gt;I recently tried to install Elementary OS Juno onto my computer, and kept getting this error, &lt;code&gt;ERRNO 5 Input/Output Error&lt;/code&gt; during the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says along with the error popup that it could be due to a faulty CD/DVD disk/drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran the installer through a 32GB USB drive that I had used to install Kali Linux on right before trying to install Elementary OS on it, as well as Lubuntu and KDE Neon after giving up on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The flash drive worked fine when installing everything except Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I searched all over the web to find solutions, all of which I tried.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I checked the SHA-256sum, and it matched.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I tried reflashing the Bootable USB multiple times, sometimes with UNetBootin and others with Etcher, and no luck either times.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I tried changing the partitions to ext3, no luck.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I tried shrinking the EFI partition to under 256MB, no luck. Nothing seems to be working.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I know it's not the flash drive because I used it to install multiple other distros before and after trying to install Elementary OS, and those all installed with no issues whatsoever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did that by downloading the ISOs for Lubuntu onto the live installation of Elementary OS and then accidentally flashing it onto the flash drive I was running the live boot on, and then I installed that, then flashed KDE Neon onto the flash drive and installing that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solutions would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="16523" LastEditorUserId="14940" LastEditDate="2018-11-30T20:09:54.303" LastActivityDate="2020-05-28T04:13:49.887" Title="ERRNO 5 Input/Output Error When Installing Juno" Tags="|system-installation|release-juno|usb-drive|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17293" PostTypeId="2" ParentId="17292" CreationDate="2018-11-28T22:53:04.250" Score="1" Body="&lt;p&gt;I found this steps here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1207755&amp;amp;page=2&amp;amp;p=7582893#post7582893&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=1207755&amp;amp;page=2&amp;amp;p=7582893#post7582893&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;Boot&lt;/strong&gt; from the live CD&lt;/li&gt;&#xA;&lt;li&gt;Choose to &lt;strong&gt;try&lt;/strong&gt; elementaryOS&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Open&lt;/strong&gt; a terminal window&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Write&lt;/strong&gt; and &lt;strong&gt;execute&lt;/strong&gt;: &lt;code&gt;ubiquity --no-migration-assistant&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Install&lt;/strong&gt; without problems&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;AFAIK elementaryOS still uses Ubiquity installer&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-11-28T22:53:04.250" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17297" PostTypeId="2" ParentId="16475" CreationDate="2018-11-29T05:03:21.440" Score="11" Body="&lt;p&gt;As user &lt;strong&gt;pole&lt;/strong&gt; mentioned above, the answer can be found here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17101/mouse-right-click-double-clicks&quot;&gt;mouse right click double clicks?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Firefox address bar, type &lt;code&gt;about:config&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &lt;code&gt;ui.context_menus.after_mouseup&lt;/code&gt; and set it to &lt;code&gt;true&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hat tip to user &lt;strong&gt;WebShaped.Biz&lt;/strong&gt; for providing the answer. &lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-11-29T05:03:21.440" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17298" PostTypeId="1" AcceptedAnswerId="17329" CreationDate="2018-11-29T09:30:57.777" Score="0" ViewCount="2363" Body="&lt;p&gt;I'm totally new in Linux and decided to switch to Elementary OS with my old macbook 4.1 (core2duo 2.4ghz) which is on OSX Lion. I &quot;upgraded&quot; it with a 500Go SSD and 4GB of ram lately but with the obsolescence of Lion OS, I wanted to give it a new life with Linux. And ElementaryOS seems to be the most classy and &quot;macos-like&quot; that i've seen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked some install documentations (on the site of Elementary of course, youtube videos and here: &lt;a href=&quot;https://github.com/aroman/elementary-on-a-mac#before-we-begin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/aroman/elementary-on-a-mac#before-we-begin&lt;/a&gt; ). The Github process made me think that maybe Elementary OS won't work on my device.&#xA;I think my macbook is on 64-bit EFI but how can I be sure? Should I give it a try?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for everyone who tries to help me.&lt;/p&gt;&#xA;" OwnerUserId="16526" LastEditorUserId="16526" LastEditDate="2018-11-29T09:54:04.010" LastActivityDate="2018-12-02T02:58:51.003" Title="Can I put Elementary OS Juno on my macbook 4.1?" Tags="|macbook|macintosh|64-bit|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17299" PostTypeId="2" ParentId="605" CreationDate="2018-11-29T12:45:42.300" Score="0" Body="&lt;p&gt;I had a slightly different need, I wanted to mount partition at the graphical session start and following the gvfs schema.&#xA;To be clearer I wanted the partition to be mounted like its icon had been clicked in Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to do that I created a simple shell script &lt;code&gt;mount-data-partition.sh&lt;/code&gt; with content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;gio mount --device=/dev/&amp;lt;my partition device&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;put it into a path that is in my login shell (in my case the default bash) PATH, opened &lt;strong&gt;System Settings &gt; Applications &gt; Startup&lt;/strong&gt; and finally added a custom command using just the name of the script &lt;code&gt;mount-data-partition.sh&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does correctly mount the device at the gvfs default &lt;strong&gt;/media/{username}/{label}&lt;/strong&gt;  path and the mount can be unmounted from Files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could use fstab and add a rule for the same mount point but it would be fixed and not depending on the label (or the user). Also Files would not be able to umount it without authentication.&lt;/p&gt;&#xA;" OwnerUserId="8384" LastActivityDate="2018-11-29T12:45:42.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17301" PostTypeId="1" CreationDate="2018-11-29T14:40:19.077" Score="0" ViewCount="1174" Body="&lt;p&gt;Elemantary OS Touchpad is not working on Lenovo Ideapad 330s.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;libinput&lt;/code&gt; and synaptics installation an configuration but it did not work.&lt;/p&gt;&#xA;" OwnerUserId="16532" LastEditorUserId="15904" LastEditDate="2018-12-01T00:13:36.993" LastActivityDate="2024-01-15T04:08:20.927" Title="Elemantary OS Touchpad not Working on Lenovo Ideapad 330s?" Tags="|release-juno|touchpad|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17302" PostTypeId="1" AcceptedAnswerId="17306" CreationDate="2018-11-29T17:35:20.300" Score="0" ViewCount="1639" Body="&lt;p&gt;Regardless of whether I am trying to install wine through applications or the terminal, I get an error. Does anyone have the same problem?&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Some packages could not be installed. It can mean&#xA;  that an impossible situation has been requested or unstable distribution has been used in which some packages have not yet been created or transferred&#xA;  from Incoming.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thank you for answer&lt;/p&gt;&#xA;" OwnerUserId="16533" LastActivityDate="2019-07-11T00:12:38.900" Title="Juno Winehq problem" Tags="|wine|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17305" PostTypeId="2" ParentId="16700" CreationDate="2018-11-29T21:33:50.047" Score="0" Body="&lt;p&gt;Here is something I wrote a few days back. It helped me with Intel HD4400 and Intel HD620:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17237/511&quot;&gt;https://elementaryos.stackexchange.com/a/17237/511&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-11-29T21:33:50.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17306" PostTypeId="2" ParentId="17302" CreationDate="2018-11-30T01:24:36.033" Score="1" Body="&lt;p&gt;I was having issues earlier tonight installing wine-staging on Elementary OS Juno following WineHQ's install instructions.  I found this &lt;a href=&quot;https://gist.github.com/itsjaredbs/5fbb1c65e0799d2aa9bc0dacc9945624#wine-staging&quot; rel=&quot;nofollow noreferrer&quot;&gt;Juno Install Guide by itsjaredbs&lt;/a&gt; and his instructions worked. Hope this works for you good luck.&lt;/p&gt;&#xA;" OwnerUserId="16534" LastActivityDate="2018-11-30T01:24:36.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17307" PostTypeId="2" ParentId="17031" CreationDate="2018-11-30T10:31:06.017" Score="0" Body="&lt;p&gt;it is a specigic driver for this model so i guess it will not work on your yoga. i solved the problem with modprobe script on wakeup folder&lt;/p&gt;&#xA;" OwnerUserId="16310" LastActivityDate="2018-11-30T10:31:06.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17308" PostTypeId="2" ParentId="16760" CreationDate="2018-11-30T11:17:31.473" Score="1" Body="&lt;p&gt;I have the same network card, lenovo ideapad 330-15arr.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This work, tested&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/990378/wi-fi-not-working-on-lenovo-thinkpad-e570-realtek-rtl8821ce&quot;&gt;https://askubuntu.com/questions/990378/wi-fi-not-working-on-lenovo-thinkpad-e570-realtek-rtl8821ce&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only problem is you do not have make and the necessary dependencies out of the bat so first you need to connect to the internet by other means&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used my phone's USB tethering then:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt upgrade&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo install make&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;, and after that you do inside &lt;code&gt;8821ce&lt;/code&gt; folder:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;make all&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;make install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;modprobe -a 8821ce&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16535" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:24.093" LastActivityDate="2018-12-05T23:45:24.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17309" PostTypeId="2" ParentId="14116" CreationDate="2018-11-30T12:02:52.320" Score="0" Body="&lt;p&gt;After the recent update of my system (including skype) the microphone is working fine again in skype.&lt;/p&gt;&#xA;" OwnerUserId="10451" LastActivityDate="2018-11-30T12:02:52.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17310" PostTypeId="2" ParentId="15413" CreationDate="2018-11-30T14:32:38.813" Score="0" Body="&lt;p&gt;I sometimes get this when the computer has trouble talking to a bluetooth audio device. It tries to wait for that before it continues playing the video. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are using a bluetooth audio device try reconnecting to it or re-enabling bluetooth. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-11-30T14:32:38.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17311" PostTypeId="2" ParentId="16700" CreationDate="2018-11-30T14:42:26.550" Score="2" Body="&lt;p&gt;It's a known issue that no one has figured out a good solution for yet:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/os/issues/121&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/121&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please use the thumbs up instead of adding comments that you also have the issue, because a lot of people  get notified for every comment added.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-12-19T19:25:54.257" LastActivityDate="2018-12-19T19:25:54.257" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17312" PostTypeId="1" AcceptedAnswerId="17321" CreationDate="2018-11-30T16:39:36.423" Score="0" ViewCount="440" Body="&lt;p&gt;I have an existing Windows 10 installation and a free partition with 600 GB in which I would like to install Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have created a USB ISO for Elemetary OS Juno. I firstly used Rufus, but I have also tried with Universal USB Installer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have set nomodeset in GRUB and also acpi=off and the combination of both. No matter what I do, no matter what pen drive I use... installation always freezes, and it happens either in the &quot;Updates and other software&quot; window when I click continue or after choosing &quot;Some other&quot;, which leads me to a window in which it tries to show me the partition table (which never shows up).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do, I have tried everything I've seen, and the laptop is an Asus from past year with Intel Core i7 and NVIDIA GeForce. If I boot from the USB, no problem, but if I try to install, it always freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand that I might be having problems with NVIDIA drivers (for what I have read), but I also understand that using nomodeset and acpi=off should skip the problem. BTW, when I set acpi=off, I got a black screen and the installation doesn't even start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any other suggestions?&lt;/p&gt;&#xA;" OwnerUserId="16537" LastActivityDate="2018-12-05T09:18:39.653" Title="Can't install on my laptop" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17313" PostTypeId="1" CreationDate="2018-11-30T16:50:25.490" Score="0" ViewCount="247" Body="&lt;p&gt;how to fix notification not show button?&#xA;When i receive file via bluetooth, notification is show but don't have any button for accept or cancel.&lt;/p&gt;&#xA;" OwnerUserId="16538" LastActivityDate="2019-12-27T10:01:45.223" Title="Notification not show any button" Tags="|notifications|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17314" PostTypeId="2" ParentId="17313" CreationDate="2018-11-30T16:58:42.813" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8anOG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8anOG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i can not accept. If i click it, do nothing.&lt;/p&gt;&#xA;" OwnerUserId="16538" LastActivityDate="2018-11-30T16:58:42.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17315" PostTypeId="1" AcceptedAnswerId="17345" CreationDate="2018-11-30T17:37:26.227" Score="0" ViewCount="94" Body="&lt;p&gt;when i delete photos from my photos folder i still can see it in the photos app in the missing files tab i still can delete that but i wondered where is it stored ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2yflU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2yflU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and if i deleted it from the missing files is it deleted completely.&lt;/p&gt;&#xA;" OwnerUserId="16394" LastEditorUserId="16394" LastEditDate="2018-12-02T03:35:17.397" LastActivityDate="2018-12-02T04:11:21.817" Title="where are photos missing files stored" Tags="|release-juno|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17316" PostTypeId="1" AcceptedAnswerId="17354" CreationDate="2018-11-30T17:46:27.937" Score="0" ViewCount="165" Body="&lt;p&gt;I'm looking for a place to track development and report issues with the patches to &lt;a href=&quot;/questions/tagged/epiphany&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;epiphany&amp;#39;&quot; rel=&quot;tag&quot;&gt;epiphany&lt;/a&gt; browser, that were made by elementary devs. Epiphany in elementary is not vanilla, however I cannot find any repo where the patches are made. Can someone please point me to the repo?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In particular I'm using Epiphany also on Ubuntu 18.04 (same version - &lt;code&gt;bionic&lt;/code&gt;), but some stuff works only in Ubuntu version and not in elementary (most notably some shortcuts, like &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; or &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt;)&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="14940" LastEditDate="2018-12-04T08:28:09.670" LastActivityDate="2018-12-10T15:52:57.560" Title="Where can I report bugs to elementary patches of Epiphany?" Tags="|release-juno|epiphany|github|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17317" PostTypeId="2" ParentId="17313" CreationDate="2018-11-30T17:49:54.227" Score="0" Body="&lt;p&gt;These are just notifications, letting you know that something happened, not dialogues expecting your actions.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-11-30T17:49:54.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17319" PostTypeId="1" CreationDate="2018-11-30T18:04:34.357" Score="0" ViewCount="305" Body="&lt;p&gt;I am having trouble installing elementary OS 5, the latest stable ISO from the website onto my Onyx Laptop (Core i7, GTX-1070, 4K screen). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can boot to the OS on the thumb drive (the test drive option), but when I try to install it from the thumb drive or from the test drive boot all I get is a elementary OS logo then the screen turns on and off repeatedly for a few minutes then stays off and I never get to the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I wait till the display stays off, then hit the power button I get the elementary logo again and it does a regular shutdown. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure what's going on here, or what to try. Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="16540" LastEditorUserId="16827" LastEditDate="2019-05-07T09:03:42.403" LastActivityDate="2019-10-04T10:00:55.157" Title="Installing elementary OS onto a System76 Onyx Laptop" Tags="|system-installation|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17320" PostTypeId="2" ParentId="17316" CreationDate="2018-11-30T18:08:34.717" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I'm looking for a place to track development...&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;For tracking development, I'm not sure about GitHub but you can check Launchpad here:&#xA;&lt;a href=&quot;https://code.launchpad.net/~zhanming/elementaryos/epiphany&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~zhanming/elementaryos/epiphany&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's also development code here:&#xA;&lt;a href=&quot;https://code.launchpad.net/~elementary-os/elementaryos/os-patch-epiphany-browser-bionic&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~elementary-os/elementaryos/os-patch-epiphany-browser-bionic&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For reporting bugs, I would suggest reading the answer here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-or-request-a-feature-for-elementary-os-to-the-develope&quot;&gt;How can I report an issue or request a feature for elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2018-12-06T23:39:58.853" LastActivityDate="2018-12-06T23:39:58.853" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17321" PostTypeId="2" ParentId="17312" CreationDate="2018-11-30T18:55:24.650" Score="0" Body="&lt;p&gt;In my case, the problem was that the system was constantly giving &quot;PCI bus error&quot;. I caught that when I hit the power button to restart. I googled the error and arrived to this answer, whose solution worked for me: &lt;a href=&quot;https://askubuntu.com/questions/771899/pcie-bus-error-severity-corrected&quot;&gt;PCI bus error severity corrected&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just set pci=nomsi in GRUB and I could install seamlessly.&lt;/p&gt;&#xA;" OwnerUserId="16537" LastActivityDate="2018-11-30T18:55:24.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17322" PostTypeId="1" AcceptedAnswerId="17326" CreationDate="2018-11-30T23:42:43.117" Score="0" ViewCount="502" Body="&lt;p&gt;i know that this is a well known trouble in community, but i sure that i already read all off and tried a lot of things, like sudo upgrade and edit text files, but i'm here because i realy love Eos, i use since march and this is the first bug in the system and i don't want leave the os because a little thing like this.&#xA;(using juno)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2QcGT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2QcGT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Sw7sK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sw7sK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16544" LastActivityDate="2018-12-01T00:36:51.387" Title="failed to fetch updates without solution" Tags="|updates|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17325" PostTypeId="2" ParentId="17301" CreationDate="2018-12-01T00:25:07.043" Score="0" Body="&lt;p&gt;Did you tried this?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://askubuntu.com/questions/1031940/how-to-switch-from-libinput-to-synaptics-in-ubuntu-18-04&quot;&gt;https://askubuntu.com/questions/1031940/how-to-switch-from-libinput-to-synaptics-in-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Also you could check the part where you should check if you have two touchpads in the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dell.com/support/article/cl/en/clbsdt1/sln308258/precision-xps-ubuntu-general-touchpad-mouse-issue-fix?lang=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dell.com/support/article/cl/en/clbsdt1/sln308258/precision-xps-ubuntu-general-touchpad-mouse-issue-fix?lang=en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-01T00:25:07.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17326" PostTypeId="2" ParentId="17322" CreationDate="2018-12-01T00:36:51.387" Score="0" Body="&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;There's no way you could have that repository in &lt;code&gt;juno&lt;/code&gt; because that repository doesn't have a release for &lt;code&gt;bionic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They don't even have one for &lt;code&gt;loki&lt;/code&gt; (&lt;code&gt;xenial&lt;/code&gt;), they stopped at &lt;code&gt;freya&lt;/code&gt; (&lt;code&gt;trusty&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just remove the repository&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:elementaryos-fr-community/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementaryos-fr-community/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementaryos-fr-community/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Second&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You never had problems upgrading, when you updated just that repo was disabled. It clearly says that at the end in the error message&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-01T00:36:51.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17327" PostTypeId="2" ParentId="17301" CreationDate="2018-12-01T04:40:51.420" Score="0" Body="&lt;p&gt;Don't know if this will help, but have you tried to change the touchpad to basic in the bios. this worked for me on a different os.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-01T04:40:51.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17328" PostTypeId="2" ParentId="17298" CreationDate="2018-12-01T09:45:42.823" Score="0" Body="&lt;p&gt;I followed these instructions and was able to install Linux on an iMac.&#xA;&lt;a href=&quot;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-01T09:45:42.823" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17329" PostTypeId="2" ParentId="17298" CreationDate="2018-12-01T09:48:00.410" Score="1" Body="&lt;p&gt;Installing Linux on a Mac isn't quite as straightforward as installing it on an older Windows machine, and you need to make a few tweaks in the installation process. You'll need a USB Thumb stick (with at least 8GB of spare space). You will also lose your macOS/OS X installation (we don't recommend trying to dual-boot OS X and Linux, because they use different filesystems and there are many reported problems).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be warned that you'll also lose your OS X Recovery Partition, so returning to OS X or macOS can be a more long-winded process, but we have instructions here on how to cope with this: How to restore a Mac without a recovery partition&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how to go about installing Linux on a Mac:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download your Linux distribution to the Mac. We recommend Ubuntu 16.04.4 LTS if this is your first Linux install. Save the file to your Downloads folder.&lt;/li&gt;&#xA;&lt;li&gt;Download and install an app called Etcher from Etcher.io. This will be used to copy the Linux install .ISO file to your USB drive.&lt;/li&gt;&#xA;&lt;li&gt;Open Etcher and click the Settings icon in the top-right. Place a tick in Unsafe Mode and click Yes, Continue. Then Click Back.&lt;/li&gt;&#xA;&lt;li&gt;Click Select Image. Choose ubuntu-16.04.1-desktop-amd64.iso (or the image you downloaded in Step 1).&lt;/li&gt;&#xA;&lt;li&gt;Insert your USB Thumb Drive. A reminder that the US Flash drive will be erased during this installation process. Make sure you've got nothing you want on it.&lt;/li&gt;&#xA;&lt;li&gt;Click Change under Select Drive. Look carefully and pick the drive that matches your USB Thumb Drive in size. It should be  /dev/disk1 if you only have a single hard drive in your Mac. Or /dev/disk2, /dev/disk3 and so on (if you have more drives attached). Do not pick /dev/disk0. That's your hard drive. Pick /dev/disk0 and you'll wipe your macOS hard drive You've been warned!&lt;/li&gt;&#xA;&lt;li&gt;Click Flash! Wait for the iso file to be copied to the USB Flash Drive.&#xA;Remove the USB Flash Drive from your Mac.&lt;/li&gt;&#xA;&lt;li&gt;Shut down the Mac you want to install Linux on and attach the USB stick.&#xA;Power up the Mac while holding down the Option key.&lt;/li&gt;&#xA;&lt;li&gt;Choose the EFI Boot option from the startup screen and press Return.&#xA;You will see a black and white screen with options to Try Ubuntu and Install Ubuntu. Don't choose either yet, press &quot;e&quot; to edit the boot entry.&lt;/li&gt;&#xA;&lt;li&gt;Edit the line that begins with Linux and place the word &quot;nomodeset&quot; after &quot;quiet splash&quot;. The whole line should read: &quot;linux /casper/vmlinuz.efi            file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash nomodeset --. (See screenshot, below.)&#xA;Press F10.&lt;/li&gt;&#xA;&lt;li&gt;Ubuntu boots into trial mode.&lt;/li&gt;&#xA;&lt;li&gt;Double-click the icon marked &quot;Install Ubuntu&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select English and choose Continue.&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Install this third-party software&quot; option and click Continue.&lt;/li&gt;&#xA;&lt;li&gt;Click Yes to the /dev/sdb alert.&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Erase disk and install Ubuntu&quot; and click Continue.&lt;/li&gt;&#xA;&lt;li&gt;Ensure that Select Drive is displaying the main hard drive. Click Install Now. Click Continue in the alert window.&lt;/li&gt;&#xA;&lt;li&gt;Select your location on the map and click Continue.&#xA;Choosing your keyboard layout and click Continue.&lt;/li&gt;&#xA;&lt;li&gt;Enter the name and password you want to use.&lt;/li&gt;&#xA;&lt;li&gt;Click Continue and Linux will begin installing.&#xA;When the installation has finished, you can log in using the name and password you chose during installation.&lt;/li&gt;&#xA;&lt;li&gt;Install Linux on a Mac using nomodeset&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Above: Step 12&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you install Linux on your Mac, it removes all of the OS X installation including the recovery partition. If you want to reinstall OS X, you'll have to create an OS X recovery disk using the thumb stick.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="100" LastEditDate="2018-12-02T02:58:51.003" LastActivityDate="2018-12-02T02:58:51.003" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17330" PostTypeId="2" ParentId="256" CreationDate="2018-12-01T10:08:32.440" Score="0" Body="&lt;h1&gt;Juno&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;In Juno you install the integration plugin with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pantheon-files-plugin-dropbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This plugin was written by an elementary dev Cody Garver and it's in the official elementary PPA (already included in default software sources). Works pretty well, I got emblems as well as the right-click menu. No indicator or similar status-checking thingy though. It also doesn't pull Dropbox, so you still need &lt;code&gt;nautilus-dropbox&lt;/code&gt; to install Dropbox itself (see &lt;code&gt;apt show pantheon-files-plugin-dropbox&lt;/code&gt;)&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2018-12-01T10:08:32.440" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17331" PostTypeId="1" CreationDate="2018-12-01T10:42:12.560" Score="0" ViewCount="76" Body="&lt;p&gt;We have a computer running elementary OS Loki. Several users have access to this computer and there are usually two or more GUI sessions open at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that any user can shutdown or reboot the computer even when other sessions are open. There is no warning, just the default confirmation dialog.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this situation, I have read that &lt;a href=&quot;https://askubuntu.com/questions/336403/what-mechanism-prevents-shutdown-when-another-open-session-exists&quot;&gt;the default behavior in Ubuntu is to log the user out without shutting down&lt;/a&gt;. How can we get a similar behavior in elementary?&lt;/p&gt;&#xA;" OwnerUserId="16548" LastActivityDate="2019-10-07T15:03:05.550" Title="How to prevent shutdown or reboot when another session is open" Tags="|release-loki|shutdown|session|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17333" PostTypeId="2" ParentId="11825" CreationDate="2018-12-01T12:40:15.673" Score="0" Body="&lt;p&gt;You can &lt;strong&gt;disable your proxy&lt;/strong&gt; by the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;-&gt;System Settings&lt;/li&gt;&#xA;&lt;li&gt;-&gt;Network&lt;/li&gt;&#xA;&lt;li&gt;-&gt; Proxy (at the end of the list)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Also, it seems that I can't open the link.&lt;/p&gt;&#xA;" OwnerUserId="16413" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:44.730" LastActivityDate="2018-12-05T23:45:44.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17334" PostTypeId="1" AcceptedAnswerId="17342" CreationDate="2018-12-01T13:21:22.047" Score="0" ViewCount="633" Body="&lt;p&gt;I cannot seem to be able to add new bluetooth device to Elementary Juno with stock utils. (with blueman it is a breeze).&#xA;Is there something wrong with my machine or is it a conscious decision (hard to believe) ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3cO6w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3cO6w.png&quot; alt=&quot;+ icon in mysteriously missing&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/I8v5t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I8v5t.png&quot; alt=&quot;(yes, i am an administrator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12598" LastActivityDate="2018-12-02T03:09:21.033" Title="How can I add a bluetooth device in Juno?" Tags="|bluetooth|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17335" PostTypeId="2" ParentId="16456" CreationDate="2018-12-01T17:40:44.467" Score="0" Body="&lt;p&gt;If it's about geary mail, you may need to give permission.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Log into your gmail account&#xA;&#xA;https://myaccount.google.com/lesssecureapps&#xA;&#xA;Turn it on. You should get the notification for your 2 factor authentication.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16413" LastActivityDate="2018-12-01T17:40:44.467" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17336" PostTypeId="2" ParentId="2329" CreationDate="2018-12-01T20:49:34.750" Score="0" Body="&lt;p&gt;When you click on the picture with the song there is a symbol on the bottom left hand corner. If you press that a couple of times it will shuffle the songs&lt;/p&gt;&#xA;" OwnerUserId="16553" LastActivityDate="2018-12-01T20:49:34.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17337" PostTypeId="1" CreationDate="2018-12-01T22:03:17.220" Score="0" ViewCount="5669" Body="&lt;p&gt;I'm a total newb to Linux, and I'm not that computer savvy in the first place. Please forgive me if this question is merely an advertisement for my ignorance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to get eOS &lt;strong&gt;Juno&lt;/strong&gt; installed on my &lt;strong&gt;HP Stream 11&lt;/strong&gt;, but no wifi. I read in other threads that it's possible Juno's wifi drivers are, uhm, sub-optimal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to figure out that the laptop has a &lt;strong&gt;Realtek&lt;/strong&gt; &lt;code&gt;RTL8822BE&lt;/code&gt; chipset. It worked fine in the Windows that came installed on the laptop. The Stream's drive isn't big enough for a parallel installation -- I've got to wipe the drive for a Linux installation so recovering from the first installation was pretty time consuming. (Actually I have a related question to that issue - asked separately). I'd like to avoid going through that again.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;From where should I obtain the Linux driver for this chipset? Is&#xA;there a preferred source?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once I've found it, I download it to a USB drive?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Then, do the Juno install and run something from the terminal to install the driver?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your patience.&lt;/p&gt;&#xA;" OwnerUserId="16505" LastEditorUserId="14940" LastEditDate="2018-12-02T05:38:14.760" LastActivityDate="2019-02-01T20:01:05.187" Title="How to Install Driver for Realtek RTL8822BE in Juno" Tags="|wifi|release-juno|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17338" PostTypeId="1" CreationDate="2018-12-02T00:24:51.393" Score="0" ViewCount="63" Body="&lt;p&gt;I have an HP Stream 11 on which I hope to install elementary OS. I got Juno and successfully installed it, but the drive on the Stream is so tiny I had to wipe Windows out and install elementary OS alone. Worked fine except the WiFi (&lt;em&gt;separate question&lt;/em&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to reinstall Windows to restore WiFi. Since reinstalling Windows I received a 256GB micro SD that now lives in the Stream's micro SD slot. I'm actually quite pleased with the way Windows is automatically managing that additional storage. Seems to be working very similar to how my &quot;fusion&quot; drive works on my Mac.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will elementary OS (or any Linux installation) do the same, or will I have to be careful about selecting where exactly I install program files, i.e., on the C: drive or D: drive?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use this computer for very limited purposes, there will be few applications installed, mostly data files. Will elementary OS automatically install applications on, and run them from, the D: drive transparently?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16505" LastEditorUserId="14940" LastEditDate="2019-01-01T18:52:48.073" LastActivityDate="2019-01-31T21:02:20.477" Title="&quot;Fusion Drive&quot; on eOS?" Tags="|release-juno|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17340" PostTypeId="2" ParentId="17337" CreationDate="2018-12-02T01:13:01.530" Score="1" Body="&lt;ol&gt;&#xA;&lt;li&gt;In Linux the majority of drivers come with the Kernel&lt;/li&gt;&#xA;&lt;li&gt;No because it exists in your system, the problem might be another thing&lt;/li&gt;&#xA;&lt;li&gt;No, again, In Linux usually you install the system and is working out of the box because comes with drivers (modules), only if you need them there are some proprietary drivers available to install like Graphics drivers but even for them you have the open source counterpart already and you choose to install the other one to get more performance (sometimes, depending of your hardware)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you check inside &lt;code&gt;/lib/firmware/rtlwifi/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls /lib/firmware/rtlwifi/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;, you'll find &lt;code&gt;rtl8822befw.bin&lt;/code&gt; which is your module so you already have it if you installed &lt;code&gt;juno&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now about your problem, it might need more research I'll update this post if I found something to help you, but first I wanted to clarify some concepts for you to know&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And in case it might help you, elementaryOS &lt;code&gt;Juno&lt;/code&gt; is based on Ubuntu 18.04 &lt;code&gt;Bionic&lt;/code&gt;. So if you want to find answers elsewhere, some directed to that distro and version might help you aswell&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17764/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17764/14940&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2019-01-02T19:03:41.477" LastActivityDate="2019-01-02T19:03:41.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17341" PostTypeId="1" CreationDate="2018-12-02T02:55:04.650" Score="4" ViewCount="949" Body="&lt;p&gt;I cannot make my computer &lt;strong&gt;hibernate&lt;/strong&gt;. I altered the settings so that pressing the power button sends the computer into hibernate mode but when I actually press the button, &lt;em&gt;nothing happens&lt;/em&gt;. Also, is there any way in which I can add the hibernate option to the drop down menu that appears when I click on the power option?&lt;/p&gt;&#xA;" OwnerUserId="16549" LastEditorUserId="16549" LastEditDate="2018-12-06T19:34:00.263" LastActivityDate="2019-12-25T21:06:37.240" Title="Hibernate option in Juno" Tags="|settings|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17342" PostTypeId="2" ParentId="17334" CreationDate="2018-12-02T03:09:21.033" Score="1" Body="&lt;p&gt;I connected my phone with my computer by just hitting the connect button that you can see beside the device name in the bluetooth settings. You will have to pair it first, though.&lt;a href=&quot;https://i.stack.imgur.com/4eJDd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4eJDd.png&quot; alt=&quot;Screenshot of connected device&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16549" LastActivityDate="2018-12-02T03:09:21.033" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17343" PostTypeId="2" ParentId="17313" CreationDate="2018-12-02T03:16:04.677" Score="0" Body="&lt;p&gt;Yes, you cannot do anything with or about it from that notification. If you want to do anything regarding the notification, you must go to the option it is referring to, in your case, it is the bluetooth option. This  might seem weird for an ex-windows user that is used to getting an action upon clicking the notification but this is how eOS works.&lt;/p&gt;&#xA;" OwnerUserId="16549" LastActivityDate="2018-12-02T03:16:04.677" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17344" PostTypeId="2" ParentId="17338" CreationDate="2018-12-02T03:58:47.937" Score="1" Body="&lt;p&gt;What you call Fusion Drive in Linux is called, for a long time, Logical Volume Management (LVM)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l0Z4y.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l0Z4y.jpg&quot; alt=&quot;lvm&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Watch this video I just found (at least the first 6 minutes)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=fadQX2e_PGk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=fadQX2e_PGk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To explain it easily enough... imagine you have three hard drives and you want the system to see them as one, with LVM you do that creating a volume group...that volume group (VG) is that huge &quot;disk&quot; and from that VG you create logical volumes (LV) that can be like creating partitions but in this case is from a logical abstraction VG&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In your case the only issue I see is in case the sdcard comes late and that produce errors. But try it maybe it doesn't happen at all&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-02T03:58:47.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17345" PostTypeId="2" ParentId="17315" CreationDate="2018-12-02T04:11:21.817" Score="0" Body="&lt;p&gt;Probably &lt;a href=&quot;/questions/tagged/photos&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;photos&amp;#39;&quot; rel=&quot;tag&quot;&gt;photos&lt;/a&gt; saved the thumbnail for that image but because the image isn't there it says that is missing. That is why &lt;a href=&quot;/questions/tagged/photos&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;photos&amp;#39;&quot; rel=&quot;tag&quot;&gt;photos&lt;/a&gt; can still be able to show you the thumbnail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thumbnails:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$HOME/.cache/io.elementary.photos/thumbs/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-02T04:11:21.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17347" PostTypeId="1" CreationDate="2018-12-02T10:16:23.040" Score="0" ViewCount="980" Body="&lt;p&gt;I've followed each and every step on the website: &lt;a href=&quot;http://docs.anaconda.com/anaconda/install/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://docs.anaconda.com/anaconda/install/linux/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I do not get the 7th or 8th steps below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The installer prompts “Do you wish the installer to prepend the Anaconda&amp;lt;2 or 3&amp;gt; install location to PATH in your /home/&amp;lt;user&amp;gt;/.bashrc ?” Enter Yes.&#xA;&#xA;NOTE: If you enter “No”, you must manually add the path to Anaconda or conda will not work. See FAQ.&#xA;&#xA;The installer describes Microsoft VS Code and asks if you would like to install VS Code. Enter yes or no. If you selected yes, follow the instructions on screen to complete the VS Code installation.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, after that, when I use anaconda-navigator, it says command not found which shows there is something wrong with my installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please note that when I start a terminal, I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: /home/codear/.bashrc: line 171: syntax error near unexpected token `added'&#xA;bash: /home/codear/.bashrc: line 171: `esac# added by Anaconda3 5.3.1 installer'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16413" LastEditorUserId="16413" LastEditDate="2018-12-02T15:59:33.327" LastActivityDate="2019-01-20T16:01:50.353" Title="Can't install Anaconda" Tags="|release-juno|python|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17350" PostTypeId="1" CreationDate="2018-12-02T14:44:01.083" Score="0" ViewCount="209" Body="&lt;p&gt;I am connected to the network, but I can not open any page in the browser nor does it work in the App Center&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on Juno 5.0&lt;/p&gt;&#xA;" OwnerUserId="16392" LastActivityDate="2023-12-10T07:02:50.317" Title="How do I activate the internet?" Tags="|wifi|release-juno|internet|ethernet|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17353" PostTypeId="2" ParentId="17350" CreationDate="2018-12-02T15:28:04.370" Score="0" Body="&lt;p&gt;have you tried pinging a website to check whether you're really connected to Internet? You can do it via terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ping google.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16413" LastActivityDate="2018-12-02T15:28:04.370" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17354" PostTypeId="2" ParentId="17316" CreationDate="2018-12-02T18:09:17.093" Score="2" Body="&lt;p&gt;Check &lt;a href=&quot;https://github.com/elementary/os-patches/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, I understood what you need but I really don't know if that is the place you are looking for. Either way they should help you better&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os-patches/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os-patches/issues&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-02T18:09:17.093" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17355" PostTypeId="2" ParentId="15180" CreationDate="2018-12-02T18:21:02.870" Score="-1" Body="&lt;p&gt;&lt;kbd&gt;Alt Gr&lt;/kbd&gt;+&lt;kbd&gt;E&lt;/kbd&gt; does not work on Kubuntu (British), but it is there. It just needs turning on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kubuntu settings manager 5.10.5&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;-&gt;Settings&lt;/li&gt;&#xA;&lt;li&gt;-&gt;Input Devices&lt;/li&gt;&#xA;&lt;li&gt;-&gt;Keyboard&lt;/li&gt;&#xA;&lt;li&gt;-&gt;Advanced&lt;/li&gt;&#xA;&lt;li&gt;-&gt;Adding currency signs to certain keys.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I added &lt;kbd&gt;€&lt;/kbd&gt; to &lt;kbd&gt;Alt Gr&lt;/kbd&gt;+&lt;kbd&gt;E&lt;/kbd&gt; as that option did not conflict with the use of any other symbols.&lt;/p&gt;&#xA;" OwnerUserId="16563" LastEditorUserId="14940" LastEditDate="2018-12-06T06:41:50.893" LastActivityDate="2018-12-06T06:41:50.893" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17356" PostTypeId="1" AcceptedAnswerId="17358" CreationDate="2018-12-02T18:47:57.217" Score="0" ViewCount="105" Body="&lt;p&gt;I have a Compaq 21N121AR Laptop and this is my problem: After I make a mouse movement and my finger leaves the mouse touchpad, my touchpad goes in a kind of &quot;Sleep Mode&quot; and it takes a few &quot;swipes&quot; to move again. I used the xinput list command and noticed that one of the devices dissapears (I assume it's the mouse touchpad). This is before I move my mouse, note the &lt;strong&gt;virtual core pointer&lt;/strong&gt; part:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zjCBs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zjCBs.png&quot; alt=&quot;xinput list screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is while moving the pointer:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/wFf32.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wFf32.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16564" LastActivityDate="2019-05-03T18:03:45.790" Title="Touchpad Locks After Inactivity Period" Tags="|release-juno|touchpad|mouse|hardware|laptop|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-03T19:43:59.960" ContentLicense="CC BY-SA 4.0" />
  <row Id="17357" PostTypeId="1" CreationDate="2018-12-02T19:06:35.403" Score="0" ViewCount="459" Body="&lt;p&gt;I installed elementary tweaks and disabled animations...ordinary windows' animation is gone, however the application menu's animation is still there....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to disable application menu's animation ?&lt;/p&gt;&#xA;" OwnerUserId="16276" LastActivityDate="2019-01-10T13:43:19.673" Title="How to disable animations for the applications menu?" Tags="|menu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17358" PostTypeId="2" ParentId="17356" CreationDate="2018-12-02T19:12:18.283" Score="0" Body="&lt;p&gt;Found it! It seems to be a problem with the libinput drivers, I solved my problem removing them and installing the synaptic drivers instead&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this removes libinput drivers, and then to install synaptic drivers:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then I restarted the system and it was solved. Thanks to Jason Gambrel for posting this solution on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7545/trackpad-randomly-freezes&quot;&gt;Trackpad randomly freezes&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16564" LastActivityDate="2018-12-02T19:12:18.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17359" PostTypeId="1" CreationDate="2018-12-02T20:31:51.893" Score="1" ViewCount="742" Body="&lt;p&gt;Low disk space on file system message on:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary: &lt;code&gt;elementary OS Freya (64-bit)&lt;/code&gt; Built on &quot;Ubuntu 14.04&#xA;LTS&quot;&lt;/li&gt;&#xA;&lt;li&gt;File manager: &lt;code&gt;Files 0.2.4&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I want to create more disk space and running the command &lt;code&gt;df-h&lt;/code&gt; gives the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Filesystem  Size  Used Avail Use% Mounted on&#xA;udev            1.9G  4.0K  1.9G   1% /dev&#xA;tmpfs           390M  1.2M  389M   1% /run&#xA;/dev/sda1        19G   18G  637M  97% /&#xA;none            4.0K     0  4.0K   0% /sys/fs/cgroup&#xA;none            5.0M     0  5.0M   0% /run/lock&#xA;none            2.0G   78M  1.9G   4% /run/shm&#xA;none            100M   44K  100M   1% /run/user&#xA;/dev/sdb1       823G   31G  751G   4% /home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can't install any programs as there is no space on &lt;code&gt;/dev/sda1&lt;/code&gt;, so I cannot install a program with a user interface to view files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore we took the following route:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, the first disk is very small, and &lt;strong&gt;Plan A&lt;/strong&gt; is just to free up enough stuff on it to stop it moaning. &lt;strong&gt;Plan B&lt;/strong&gt; would he to move some stuff over to the spacious disk, and link it in. But hopefully A will work!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reckon there's a lot of unused kernel images in &lt;code&gt;/boot&lt;/code&gt;, it seeks to get a known weakness with elementary that it doesn't tidy old ones up. I had a web page up that described how to remove them and then update the grub menu so it didn't offer them anymore. But the first command was giving a funny error. I'm following the suggestions on this page:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/95/how-to-remove-old-kernel-versions&quot;&gt;How to remove old kernel versions?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;So, we ran this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | fgrep linux-image-&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will list a lot of kernel images, most of which you aren't actively using. They're all similarly named, differentiated by a numerical suffix e.g. &quot;&lt;code&gt;.151&lt;/code&gt;&quot; To find out which one you are using when you boot up, run this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The result was an old kernel image: &lt;code&gt;3.13.0-44-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We are assuming that any other kernel images newer than this can go:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So starting with &lt;code&gt;3.13.0-45-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo su &#xA;# apt-get purge linux-image-3.13.0-45-generic&#xA;# exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running this command produced the following:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these:&#xA;The following packages have unmet de pendencies:&#xA; linux-headers-generic : Depends: linux-headers-3.13.0-151-generic but it is not going to be installed&#xA; linux-image-extra-3.13.0-45-generic : Depends: linux-image-3.13.0-45-generic but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).&#xA;# &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;code&gt;apt-get -f install&lt;/code&gt; but not sure if I should now run &lt;code&gt;apt-get autoremove&lt;/code&gt; - I guess there will be a net gain of disk space that will accommodate the 13.5MB need for the new installations? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# apt-get -f install&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  libbonobo2-0 libbonobo2-common libgconf2-4 libgnome2-0 libgnome2-bin&#xA;  libgnome2-common libgnomevfs2-0 libgnomevfs2-common libidl-common libidl0&#xA;  libntdb1 liborbit-2-0 liborbit2 libqpdf13 linux-headers-3.13.0-105&#xA;  linux-headers-3.13.0-105-generic linux-headers-3.13.0-116&#xA;  linux-headers-3.13.0-116-generic linux-image-3.13.0-105-generic&#xA;  linux-image-3.13.0-116-generic linux-image-extra-3.13.0-105-generic&#xA;  linux-image-extra-3.13.0-116-generic python-ntdb&#xA;Use 'apt-get autoremove' to remove them.&#xA;The following extra packages will be installed:&#xA;  linux-headers-3.13.0-151-generic&#xA;The following NEW packages will be installed:&#xA;  linux-headers-3.13.0-151-generic&#xA;0 upgraded, 1 newly installed, 0 to remove and 8 not upgraded.&#xA;2 not fully installed or removed.&#xA;Need to get 0 B/706 kB of archives.&#xA;After this operation, 13.5 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] apt-get -f install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# apt-get autoremove&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt-get -f install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; linux-headers-generic : Depends: linux-headers-3.13.0-151-generic but it is not installed&#xA;E: Unmet dependencies. Try using -f.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# apt-get -f install&#xA;    Reading package lists... Done&#xA;    Building dependency tree       &#xA;    Reading state information... Done&#xA;    Correcting dependencies... Done&#xA;    The following packages were automatically installed and are no longer required:&#xA;      libbonobo2-0 libbonobo2-common libgconf2-4 libgnome2-0 libgnome2-bin&#xA;      libgnome2-common libgnomevfs2-0 libgnomevfs2-common libidl-common libidl0&#xA;      libntdb1 liborbit-2-0 liborbit2 libqpdf13 linux-headers-3.13.0-105&#xA;      linux-headers-3.13.0-105-generic linux-headers-3.13.0-116&#xA;      linux-headers-3.13.0-116-generic linux-image-3.13.0-105-generic&#xA;      linux-image-3.13.0-116-generic linux-image-extra-3.13.0-105-generic&#xA;      linux-image-extra-3.13.0-116-generic python-ntdb&#xA;    Use 'apt-get autoremove' to remove them.&#xA;    The following extra packages will be installed:&#xA;      linux-headers-3.13.0-151-generic&#xA;    The following NEW packages will be installed:&#xA;      linux-headers-3.13.0-151-generic&#xA;    0 upgraded, 1 newly installed, 0 to remove and 8 not upgraded.&#xA;    2 not fully installed or removed.&#xA;    Need to get 0 B/706 kB of archives.&#xA;    After this operation, 13.5 MB of additional disk space will be used.&#xA;    Do you want to continue? [Y/n] n&#xA;    Abort.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;After this operation, 13.5 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] yes&#xA;&#xA;(Reading database ... 1223843 files and directories currently installed.)&#xA;Preparing to unpack .../linux-headers-3.13.0-151 generic_3.13.0-151.201_amd64.deb ...&#xA;Unpacking linux-headers-3.13.0-151-generic (3.13.0-151.201) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/linux-headers-3.13.0-151-generic_3.13.0-151.201_amd64.deb (--unpack):&#xA;error creating symbolic link `./usr/src/linux-headers-3.13.0-151-generic/include/linux/if_arp.h': No space left on device&#xA;No apport report written because the error message indicates a disk full error&#xA;&#xA;Errors were encountered while processing:&#xA;/var/cache/apt/archives/linux-headers-3.13.0-151-generic_3.13.0-151.201_amd64.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&amp;lt;1&gt; dpkg --list | grep linux-image &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://pastebin.com/NQChqwir&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/NQChqwir&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo du -h / -d 1 --exclude=/home&#xA;[sudo] password: &#xA;8.0K    /media&#xA;0   /sys&#xA;15M /sbin&#xA;4.0K    /cdrom&#xA;16K /lost+found&#xA;du: cannot access ‘/proc/3069/task/3069/fd/3’: No such file or directory&#xA;du: cannot access ‘/proc/3069/task/3069/fdinfo/3’: No such file or directory&#xA;du: cannot access ‘/proc/3069/fd/3’: No such file or directory&#xA;du: cannot access ‘/proc/3069/fdinfo/3’: No such file or directory&#xA;0   /proc&#xA;1.3G    /var&#xA;300K    /tmp&#xA;68K /root&#xA;4.0K    /mnt&#xA;31M /etc&#xA;7.1G    /lib&#xA;4.0K    /lib64&#xA;4.0K    /opt&#xA;4.0K    /dev&#xA;1.4G    /boot&#xA;4.0K    /srv&#xA;du: cannot access ‘/run/user/1000/gvfs’: Permission denied&#xA;1.4M    /run&#xA;9.7M    /bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Filesystem     Inodes IUsed IFree IUse% Mounted on&#xA;udev             484K   539  483K    1% /dev&#xA;tmpfs            488K   550  487K    1% /run&#xA;/dev/sda1        1.2M  1.2M  8.9K  100% /&#xA;none             488K     2  488K    1% /sys/fs/cgroup&#xA;none             488K     3  488K    1% /run/lock&#xA;none             488K    45  488K    1% /run/shm&#xA;none             488K    24  488K    1% /run/user&#xA;/dev/sdb1         53M   42K   53M    1% /home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# for i in /*; do echo $i; find $i |wc -l; done&#xA;/bin&#xA;154&#xA;/boot&#xA;504&#xA;/cdrom&#xA;1&#xA;/dev&#xA;546&#xA;/etc&#xA;2911&#xA;/home&#xA;42341&#xA;/initrd.img&#xA;1&#xA;/initrd.img.old&#xA;1&#xA;/lib&#xA;175661&#xA;/lib32&#xA;44&#xA;/lib64&#xA;2&#xA;/lost+found&#xA;1&#xA;/media&#xA;2&#xA;/mnt&#xA;1&#xA;/opt&#xA;1&#xA;/proc&#xA;109901&#xA;/root&#xA;17&#xA;/run&#xA;571&#xA;/sbin&#xA;211&#xA;/srv&#xA;1&#xA;/sys&#xA;29272&#xA;/tmp&#xA;20&#xA;/usr&#xA;1051276&#xA;/var&#xA;10966&#xA;/vmlinuz&#xA;1&#xA;/vmlinuz.old&#xA;1&#xA;# exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I am uncertain but I may have missed a step.  First line in step 4 (after you ran du on /) has this already been completed?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo du -h /lib/ -d 1 --exclude=/home&#xA;[sudo] password for gary: &#xA;52K /lib/recovery-mode&#xA;220K    /lib/plymouth&#xA;17M /lib/x86_64-linux-gnu&#xA;8.0K    /lib/ifupdown&#xA;12K /lib/apparmor&#xA;16K /lib/hdparm&#xA;8.0K    /lib/modules-load.d&#xA;6.9G    /lib/modules&#xA;12K /lib/linux-sound-base&#xA;175M    /lib/firmware&#xA;8.0K    /lib/nvidia-340&#xA;1.3M    /lib/xtables&#xA;140K    /lib/modprobe.d&#xA;32K /lib/lsb&#xA;880K    /lib/systemd&#xA;768K    /lib/brltty&#xA;16K /lib/resolvconf&#xA;208K    /lib/terminfo&#xA;36K /lib/ufw&#xA;11M /lib/udev&#xA;20K /lib/init&#xA;28K /lib/crda&#xA;7.1G    /lib/&#xA;:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;$ sudo du -h /lib/modules/* -d 1&#xA;    [sudo] password: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2&gt; $ sudo du -h /lib/modules/* -d 1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/U65EfV7P&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/U65EfV7P&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&amp;lt;3&gt; $ ls -la /lib/modules/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/u8m3WctC&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/u8m3WctC&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;total 152&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;3.13.0-44-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ awk -F\' '/menuentry / {print $2}' /boot/grub/grub.cfg&#xA;elementary OS&#xA;elementary OS, with Linux 3.13.0-151-generic&#xA;elementary OS, with Linux 3.13.0-151-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-149-generic&#xA;elementary OS, with Linux 3.13.0-149-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-147-generic&#xA;elementary OS, with Linux 3.13.0-147-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-145-generic&#xA;elementary OS, with Linux 3.13.0-145-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-144-generic&#xA;elementary OS, with Linux 3.13.0-144-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-143-generic&#xA;elementary OS, with Linux 3.13.0-143-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-142-generic&#xA;elementary OS, with Linux 3.13.0-142-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-141-generic&#xA;elementary OS, with Linux 3.13.0-141-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-139-generic&#xA;elementary OS, with Linux 3.13.0-139-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-137-generic&#xA;elementary OS, with Linux 3.13.0-137-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-135-generic&#xA;elementary OS, with Linux 3.13.0-135-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-133-generic&#xA;elementary OS, with Linux 3.13.0-133-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-132-generic&#xA;elementary OS, with Linux 3.13.0-132-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-129-generic&#xA;elementary OS, with Linux 3.13.0-129-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-128-generic&#xA;elementary OS, with Linux 3.13.0-128-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-126-generic&#xA;elementary OS, with Linux 3.13.0-126-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-125-generic&#xA;elementary OS, with Linux 3.13.0-125-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-123-generic&#xA;elementary OS, with Linux 3.13.0-123-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-121-generic&#xA;elementary OS, with Linux 3.13.0-121-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-119-generic&#xA;elementary OS, with Linux 3.13.0-119-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-117-generic&#xA;elementary OS, with Linux 3.13.0-117-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-116-generic&#xA;elementary OS, with Linux 3.13.0-116-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-115-generic&#xA;elementary OS, with Linux 3.13.0-115-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-113-generic&#xA;elementary OS, with Linux 3.13.0-113-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-112-generic&#xA;elementary OS, with Linux 3.13.0-112-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-110-generic&#xA;elementary OS, with Linux 3.13.0-110-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-108-generic        &#xA;elementary OS, with Linux 3.13.0-108-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-107-generic&#xA;elementary OS, with Linux 3.13.0-107-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-106-generic&#xA;elementary OS, with Linux 3.13.0-106-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-105-generic&#xA;elementary OS, with Linux 3.13.0-105-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-101-generic&#xA;elementary OS, with Linux 3.13.0-101-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-85-generic&#xA;elementary OS, with Linux 3.13.0-85-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-74-generic&#xA;elementary OS, with Linux 3.13.0-74-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-57-generic&#xA;elementary OS, with Linux 3.13.0-57-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-45-generic&#xA;elementary OS, with Linux 3.13.0-45-generic (recovery mode)&#xA;elementary OS, with Linux 3.13.0-44-generic&#xA;elementary OS, with Linux 3.13.0-44-generic (recovery mode)&#xA;Memory test (memtest86+)&#xA;Memory test (memtest86+, serial console 115200)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:~$ sudo su&#xA;: &#xA;# for i in /usr/*; do echo $i; find $i |wc -l; done&#xA;/usr/bin&#xA;1369&#xA;/usr/games&#xA;8&#xA;/usr/include&#xA;1334&#xA;/usr/lib&#xA;18577&#xA;/usr/lib32&#xA;308&#xA;/usr/local&#xA;29&#xA;/usr/sbin&#xA;201&#xA;/usr/share&#xA;144962&#xA;/usr/src&#xA;884487&#xA;&#xA;exit&#xA;:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~$ sudo dpkg --purge --force-depends,remove-reinstreq linux-    image-3.13.0-101-generic&#xA;dpkg: linux-image-3.13.0-101-generic: dependency problems, but removing   anyway as you requested:&#xA;linux-image-extra-3.13.0-101-generic depends on linux-image-3.13.0-101-generic.&#xA;&#xA;(Reading database ... 1223842 files and directories currently installed.)&#xA;Removing linux-image-3.13.0-101-generic (3.13.0-101.148) ...&#xA;Examining /etc/kernel/prerm.d.&#xA;run-parts: executing /etc/kernel/prerm.d/dkms 3.13.0-101-generic /boot/vmlinuz-3.13.0-101-generic&#xA;dkms: removing: bbswitch 0.7 (3.13.0-101-generic) (x86_64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Uninstall Beginning&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Module:  bbswitch&#xA;Version: 0.7&#xA;Kernel:  3.13.0-101-generic (x86_64)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Status: Before uninstall, this module version was ACTIVE on this kernel.&#xA;&#xA;bbswitch.ko:&#xA; - Uninstallation&#xA;   - Deleting from: /lib/modules/3.13.0-101-generic/extra/&#xA; - Original module&#xA;   - No original module was found for this module on this kernel.&#xA;   - Use the dkms install command to reinstall any previous module version.&#xA;&#xA;depmod....&#xA;&#xA;DKMS: uninstall completed.&#xA;Examining /etc/kernel/postrm.d .&#xA;run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-101-generic /boot/vmlinuz-3.13.0-101-generic&#xA;update-initramfs: Deleting /boot/initrd.img-3.13.0-101-generic&#xA;run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-101-generic /boot/vmlinuz-3.13.0-101-generic&#xA;Generating grub configuration file ...&#xA;Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT  is set is no longer supported.&#xA;Found linux image: /boot/vmlinuz-3.13.0-151-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-151-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-149-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-149-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-147-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-147-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-145-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-145-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-144-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-144-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-143-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-143-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-142-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-142-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-141-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-141-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-139-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-139-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-137-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-137-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-135-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-135-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-133-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-133-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-132-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-132-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-129-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-129-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-128-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-128-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-126-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-126-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-125-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-125-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-123-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-123-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-121-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-121-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-119-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-119-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-117-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-117-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-116-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-116-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-115-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-115-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-113-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-113-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-112-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-112-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-110-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-110-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-108-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-108-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-107-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-107-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-106-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-106-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-105-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-105-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-85-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-85-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-74-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-74-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-57-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-57-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-45-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-45-generic&#xA;Found linux image: /boot/vmlinuz-3.13.0-44-generic&#xA;Found initrd image: /boot/initrd.img-3.13.0-44-generic&#xA;Found memtest86+ image: /boot/memtest86+.elf&#xA;Found memtest86+ image: /boot/memtest86+.bin&#xA;done&#xA;Purging configuration files for linux-image-3.13.0-101-generic    (3.13.0-101.148) ...&#xA;Examining /etc/kernel/postrm.d .&#xA;run-parts: executing /etc/kernel/postrm.d/initramfs-tools 3.13.0-101- generic /boot/vmlinuz-3.13.0-101-generic&#xA;run-parts: executing /etc/kernel/postrm.d/zz-update-grub 3.13.0-101-generic  /boot/vmlinuz-3.13.0-101-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;sudo dpkg --purge --force-depends,remove-reinstreq linux-image&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/TBFb9He9&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/TBFb9He9&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;df -h&#xA;Filesystem      Size  Used Avail Use% Mounted on&#xA;udev            1.9G   12K  1.9G   1% /dev&#xA;tmpfs           390M  1.2M  389M   1% /run&#xA;/dev/sda1        19G   15G  3.7G  80% /&#xA;none            4.0K     0  4.0K   0% /sys/fs/cgroup&#xA;none            5.0M     0  5.0M   0% /run/lock&#xA;none            2.0G   51M  1.9G   3% /run/shm&#xA;none            100M   60K  100M   1% /run/user&#xA;/dev/sdb1       823G   30G  752G   4% /home&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&amp;lt;05/12/18&gt; I ran 6 with the full command and it returned over 142,000 so impossible to fully paste &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then tried to ran 7 but when I paste in Terminal and click on return Terminal crashes  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;code&gt;df -ih&lt;/code&gt; gives ouput:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;bash: cannot create temp file for here-document: No space left on device&#xA;Filesystem     Inodes IUsed IFree IUse% Mounted on&#xA;udev             484K   545  483K    1% /dev&#xA;tmpfs            488K   554  487K    1% /run&#xA;/dev/sda1        1.2M  1.2M     0  100% /&#xA;none             488K     2  488K    1% /sys/fs/cgroup&#xA;none             488K     3  488K    1% /run/lock&#xA;none             488K    56  488K    1% /run/shm&#xA;none             488K    29  488K    1% /run/user&#xA;/dev/sdb1         53M   40K   53M    1% /home&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I logged on this morning updates on software ran - this has not happened since the low disk problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&amp;lt;06/12/18&gt; I can no longer log on.  PC starts and then gets to login page as normal. I enter login and 'return.' Instead of starting up it goes to a blank screen and then back to login page.&lt;/p&gt;&#xA;" OwnerUserId="16554" LastEditorUserId="16554" LastEditDate="2018-12-06T21:07:18.033" LastActivityDate="2018-12-08T16:31:17.370" Title="Low disk space on file system" Tags="|release-freya|apt|kernel|disk-management|filesystem|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17360" PostTypeId="2" ParentId="17225" CreationDate="2018-12-02T20:49:13.423" Score="0" Body="&lt;p&gt;A fix has been posted to the website with an updated link. &lt;a href=&quot;https://github.com/elementary/website/pull/2122&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/website/pull/2122&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2018-12-02T20:49:13.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17362" PostTypeId="1" CreationDate="2018-12-02T23:05:31.087" Score="2" ViewCount="293" Body="&lt;p&gt;Is there a way to get the cursor to autofocus on login screen? Currently I have to use the mouse to get the cursor to the login screen in order to enter the password. I would like to be able to just enter my password without having to use mouse to get cursor to password field.&lt;/p&gt;&#xA;" OwnerUserId="16568" LastActivityDate="2018-12-02T23:05:31.087" Title="How to get cursor autofocus on login screen?" Tags="|settings|keyboard|elementary-project|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-23T20:30:41.723" ContentLicense="CC BY-SA 4.0" />
  <row Id="17363" PostTypeId="2" ParentId="17359" CreationDate="2018-12-03T05:08:29.763" Score="2" Body="&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Don't touch the &lt;a href=&quot;/questions/tagged/kernel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;kernel&amp;#39;&quot; rel=&quot;tag&quot;&gt;kernel&lt;/a&gt;, please, if you need space there's other places you can chop and vandalize. There's a reason you always have two version of the &lt;a href=&quot;/questions/tagged/kernel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;kernel&amp;#39;&quot; rel=&quot;tag&quot;&gt;kernel&lt;/a&gt; in the system. And &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt; always tells you to remove the old (3rd one) when you upgrade it.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Second&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt; has space to fix itself, why didn't you answer &lt;code&gt;Y&lt;/code&gt; &lt;em&gt;(yes)&lt;/em&gt; when you ran &lt;code&gt;sudo apt install -f&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;answer &lt;em&gt;yes&lt;/em&gt;, and then run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now if you want to make space...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the command as &lt;a href=&quot;/questions/tagged/root&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;root&amp;#39;&quot; rel=&quot;tag&quot;&gt;root&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# du -h / -d 1 --exclude=/home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or with &lt;code&gt;sudo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo du -h / -d 1 --exclude=/home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(choose one)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There we could see which directory uses more space, I bet and probably is &lt;code&gt;/var&lt;/code&gt;. The moment you provide that feedback we can continue. Because the nature of you problem is space and I can't tell you to run commands that need space to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could tell you, as an answer, to shrink &lt;code&gt;/home&lt;/code&gt; to give more space to &lt;code&gt;/&lt;/code&gt;, but that will need a lot of time and you could lose data in the process, so the best way &lt;em&gt;now&lt;/em&gt; is to go step by step. You more than an answer need a solution and I can help you if you keep giving us the information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing is sure, you have space to make. No way you need 19 Gigs in the root mount point&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;3&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run this command and paste the output please:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ df -ih&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And also as root run this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo su&#xA;# for i in /*; do echo $i; find $i |wc -l; done&#xA;# exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;4&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Now (after you ran &lt;code&gt;du&lt;/code&gt; on &lt;code&gt;/&lt;/code&gt;) please run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; $ sudo du -h /lib/ -d 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, we started to see what's your problem. Looks like you are out of &lt;code&gt;inodes&lt;/code&gt; on &lt;code&gt;/&lt;/code&gt;. I need to check what's on &lt;code&gt;/lib&lt;/code&gt; and then we can start to do some stuff&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;5&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run every command and paste each output separately:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo du -h /lib/modules/* -d 1&#xA;&#xA;$ ls -la /lib/modules/&#xA;&#xA;$ uname -r&#xA;&#xA;$ dpkg --list | grep linux-image&#xA;&#xA;$ awk -F\' '/menuentry / {print $2}' /boot/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run as root&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo su&#xA;# for i in /usr/*; do echo $i; find $i |wc -l; done&#xA;# exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;6&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --purge --force-depends,remove-reinstreq linux-image-3.13.0-101-generic linux-image-3.13.0-105-generic linux-image-3.13.0-106-generic linux-image-3.13.0-107-generic linux-image-3.13.0-108-generic linux-image-3.13.0-110-generic linux-image-3.13.0-112-generic linux-image-3.13.0-113-generic linux-image-3.13.0-115-generic linux-image-3.13.0-116-generic linux-image-3.13.0-117-generic linux-image-3.13.0-119-generic linux-image-3.13.0-121-generic linux-image-3.13.0-123-generic linux-image-3.13.0-125-generic linux-image-3.13.0-126-generic linux-image-3.13.0-128-generic linux-image-3.13.0-129-generic linux-image-3.13.0-132-generic linux-image-3.13.0-133-generic linux-image-3.13.0-135-generic linux-image-3.13.0-137-generic linux-image-3.13.0-139-generic linux-image-3.13.0-141-generic linux-image-3.13.0-142-generic linux-image-3.13.0-143-generic linux-image-3.13.0-144-generic linux-image-3.13.0-145-generic linux-image-3.13.0-147-generic linux-image-3.13.0-45-generic linux-image-3.13.0-57-generic linux-image-3.13.0-74-generic linux-image-3.13.0-85-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;I left the current and the last two versions&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hG0ey.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hG0ey.png&quot; alt=&quot;dpkg-console-command&quot;&gt;&lt;/a&gt;&#xA;(paste the output)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;7&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If you ran &lt;strong&gt;6&lt;/strong&gt;, you should have only 3 kernel entries now&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let's check, run this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;8&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Remove kernels leftovers (from 6)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --purge --force-depends,remove-reinstreq linux-image-extra-3.13.0-116-generic linux-image-extra-3.13.0-119-generic linux-image-extra-3.13.0-121-generic linux-image-extra-3.13.0-123-generic linux-image-extra-3.13.0-125-generic linux-image-extra-3.13.0-126-generic linux-image-extra-3.13.0-128-generic linux-image-extra-3.13.0-129-generic linux-image-extra-3.13.0-132-generic linux-image-extra-3.13.0-133-generic linux-image-extra-3.13.0-135-generic linux-image-extra-3.13.0-137-generic linux-image-extra-3.13.0-139-generic linux-image-extra-3.13.0-141-generic linux-image-extra-3.13.0-142-generic linux-image-extra-3.13.0-143-generic linux-image-extra-3.13.0-144-generic linux-image-extra-3.13.0-145-generic linux-image-extra-3.13.0-147-generic linux-image-extra-3.13.0-45-generic linux-image-extra-3.13.0-57-generic linux-image-extra-3.13.0-74-generic linux-image-extra-3.13.0-85-generic linux-image-extra-3.13.0-105-generic linux-image-extra-3.13.0-106-generic linux-image-extra-3.13.0-107-generic linux-image-extra-3.13.0-108-generic linux-image-extra-3.13.0-110-generic linux-image-extra-3.13.0-112-generic linux-image-extra-3.13.0-113-generic linux-image-extra-3.13.0-115-generic linux-modules-3.13.0-116-generic linux-modules-3.13.0-119-generic linux-modules-3.13.0-121-generic linux-modules-3.13.0-123-generic linux-modules-3.13.0-125-generic linux-modules-3.13.0-126-generic linux-modules-3.13.0-128-generic linux-modules-3.13.0-129-generic linux-modules-3.13.0-132-generic linux-modules-3.13.0-133-generic linux-modules-3.13.0-135-generic linux-modules-3.13.0-137-generic linux-modules-3.13.0-139-generic linux-modules-3.13.0-141-generic linux-modules-3.13.0-142-generic linux-modules-3.13.0-143-generic linux-modules-3.13.0-144-generic linux-modules-3.13.0-145-generic linux-modules-3.13.0-147-generic linux-modules-3.13.0-45-generic linux-modules-3.13.0-57-generic linux-modules-3.13.0-74-generic linux-modules-3.13.0-85-generic linux-modules-3.13.0-105-generic linux-modules-3.13.0-106-generic linux-modules-3.13.0-107-generic linux-modules-3.13.0-108-generic linux-modules-3.13.0-110-generic linux-modules-3.13.0-112-generic linux-modules-3.13.0-113-generic linux-modules-3.13.0-115-generic linux-headers-3.13.0-116-generic linux-headers-3.13.0-119-generic linux-headers-3.13.0-121-generic linux-headers-3.13.0-123-generic linux-headers-3.13.0-125-generic linux-headers-3.13.0-126-generic linux-headers-3.13.0-128-generic linux-headers-3.13.0-129-generic linux-headers-3.13.0-132-generic linux-headers-3.13.0-133-generic linux-headers-3.13.0-135-generic linux-headers-3.13.0-137-generic linux-headers-3.13.0-139-generic linux-headers-3.13.0-141-generic linux-headers-3.13.0-142-generic linux-headers-3.13.0-143-generic linux-headers-3.13.0-144-generic linux-headers-3.13.0-145-generic linux-headers-3.13.0-147-generic linux-headers-3.13.0-45-generic linux-headers-3.13.0-57-generic linux-headers-3.13.0-74-generic linux-headers-3.13.0-85-generic linux-headers-3.13.0-105-generic linux-headers-3.13.0-106-generic linux-headers-3.13.0-107-generic linux-headers-3.13.0-108-generic linux-headers-3.13.0-110-generic linux-headers-3.13.0-112-generic linux-headers-3.13.0-113-generic linux-headers-3.13.0-115-generic linux-headers-3.13.0-123 linux-headers-3.13.0-125 linux-headers-3.13.0-126 linux-headers-3.13.0-128 linux-headers-3.13.0-129 linux-headers-3.13.0-132 linux-headers-3.13.0-133 linux-headers-3.13.0-135 linux-headers-3.13.0-137 linux-headers-3.13.0-139 linux-headers-3.13.0-141 linux-headers-3.13.0-142 linux-headers-3.13.0-143 linux-headers-3.13.0-144 linux-headers-3.13.0-145 linux-headers-3.13.0-147 linux-headers-3.13.0-45 linux-headers-3.13.0-57 linux-headers-3.13.0-74 linux-headers-3.13.0-85 linux-headers-3.13.0-105 linux-headers-3.13.0-106 linux-headers-3.13.0-107 linux-headers-3.13.0-108 linux-headers-3.13.0-110 linux-headers-3.13.0-112 linux-headers-3.13.0-113 linux-headers-3.13.0-115&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, let's try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Pastebin | A Simple How-To&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Copy the text from your computer. Include as much as you can.&lt;/li&gt;&#xA;&lt;li&gt;Visit &lt;a href=&quot;https://pastebin.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Paste your text into the big text box.&lt;/li&gt;&#xA;&lt;li&gt;Click the submit button. The button where it says &quot;Create New Paste&quot;&lt;/li&gt;&#xA;&lt;li&gt;The browser will take you to a new page.  The address (URL) of the page is unique. You can copy the address from the address bar, and share it with others, and they will be able to see the text you pasted.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-08T16:31:17.370" LastActivityDate="2018-12-08T16:31:17.370" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17365" PostTypeId="1" CreationDate="2018-12-03T11:43:51.400" Score="2" ViewCount="100" Body="&lt;p&gt;I've been running Elementary 5 &quot;Juno&quot; since a few days and experiencing &quot;&lt;strong&gt;freezes&lt;/strong&gt;&quot; on the &lt;strong&gt;File Manager/GUI&lt;/strong&gt; when copying/moving large amounts of files (1k or more) between folders, disks or network volumes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not been able to reproduce the &lt;strong&gt;EXACT&lt;/strong&gt; steps to make it happen, but happens frequently enoguh to be an issue, since I'm trying to organize my music and video collection on my Media Center. What I'm doing:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open 2 instances of the file manager, one on each window, side by&#xA;side. Instances may be local folders, an external disk or a network&#xA;volume (SMB).&lt;/li&gt;&#xA;&lt;li&gt;Drag or Cut &amp;amp; Paste files between them.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Eventually, the file manager GUI freezes. I get the hand cursor with the + sign, the mouse stil moves. I can still alternate between apps with Alt-Tab, but &lt;strong&gt;mouse clicks do not register, on any app&lt;/strong&gt;. I tried to let the machine in this state for up to 15 minutes to see if it would eventually &quot;unfreeze&quot; itself, but it didn't happen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point, the only way I can get control back is by forcing a reboot/power off (holding the power button). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a known issue? The machine is a Samsung R480 notebook (Core i5, 6 GB of RAM, 500 GB HDD, Nvidia GeForce 630M + Intel Integrated Graphics).&lt;/p&gt;&#xA;" OwnerUserId="16574" LastEditorUserId="12279" LastEditDate="2018-12-05T23:45:48.110" LastActivityDate="2019-01-05T03:03:00.640" Title="UI freezing during file management" Tags="|release-juno|" AnswerCount="1" CommentCount="2" ClosedDate="2019-04-30T13:43:45.280" ContentLicense="CC BY-SA 4.0" />
  <row Id="17366" PostTypeId="2" ParentId="16325" CreationDate="2018-12-03T13:21:02.017" Score="0" Body="&lt;p&gt;I am not an expert in elementary OS but you seem to be missing some packages, I know for sure that &lt;a href=&quot;https://packages.debian.org/search?keywords=gconf2&amp;amp;searchon=names&amp;amp;suite=stable&amp;amp;section=all&quot; rel=&quot;nofollow noreferrer&quot;&gt;gconf2 exists in debian&lt;/a&gt;, try the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gconf2 gconf-service libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please try to investigate why those packages gconf2, gconf-service and libappindicator1 are not included because installing it can cause the installation of unwanted packages or conflicts with your currently installed ones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="16577" LastActivityDate="2018-12-03T13:21:02.017" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17367" PostTypeId="2" ParentId="16877" CreationDate="2018-12-03T17:40:34.380" Score="0" Body="&lt;p&gt;Juno doesn't come with system tray. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's a shame, but you can install it in a much smooth way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I find out a marvelous github repo. &lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Tools to use:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Eddy (from AppCenter)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Steps&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download .deb file 'indicator-application', a package to support Pantheon. &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Download .deb file 'wingpanel-indicator-ayatana', a package that used to be in olders distro. &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+files/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Once both packages installed, reboot and have fun.&lt;/p&gt;&#xA;" OwnerUserId="13661" LastActivityDate="2018-12-03T17:40:34.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17368" PostTypeId="1" CreationDate="2018-12-03T20:34:24.320" Score="3" ViewCount="660" Body="&lt;p&gt;When I type a command inside Visual Studio Code's terminal the system brings out a notification that this command is complete. This is happening since I updated to Juno, when I was in Loki this was not happening. How can I disable this?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastEditorUserId="25621" LastEditDate="2021-05-02T19:51:35.277" LastActivityDate="2021-05-02T19:51:35.277" Title="Juno - Notifications inside Visual Studio Code's integrated terminal" Tags="|release-hera|release-juno|pantheon-terminal|vscode|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17369" PostTypeId="2" ParentId="17365" CreationDate="2018-12-03T21:16:18.750" Score="0" Body="&lt;p&gt;I had the same problem I just use the menu key to get out of the hand cursor with the + sign I know it's not the best solution but it works for me .&lt;/p&gt;&#xA;" OwnerUserId="16394" LastActivityDate="2018-12-03T21:16:18.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17370" PostTypeId="2" ParentId="17368" CreationDate="2018-12-03T21:20:15.130" Score="1" Body="&lt;p&gt;You can manage notifications here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;io.elementary.switchboard settings://notifications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TeMXB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TeMXB.png&quot; alt=&quot;io.elementary.switchboard settings://notifications&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, if you can't change it/disable it there then you should ask their support channel directly.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;strong&gt;Ask a question [Stackexchange]&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;&lt;a href=&quot;https://go.microsoft.com/fwlink/?LinkID=536384&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://go.microsoft.com/fwlink/?LinkID=536384&lt;/a&gt;&lt;/li&gt;&#xA;  &lt;/ul&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;strong&gt;Report an issue&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;&lt;a href=&quot;https://www.github.com/Microsoft/vscode/issues/new&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.github.com/Microsoft/vscode/issues/new&lt;/a&gt;&lt;/li&gt;&#xA;  &lt;/ul&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;&lt;strong&gt;Request a feature&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;&lt;a href=&quot;https://go.microsoft.com/fwlink/?LinkID=533482&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://go.microsoft.com/fwlink/?LinkID=533482&lt;/a&gt;&lt;/li&gt;&#xA;  &lt;/ul&gt;&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://code.visualstudio.com/community&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.visualstudio.com/community&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-03T21:20:15.130" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17371" PostTypeId="1" CreationDate="2018-12-03T21:42:04.120" Score="0" ViewCount="358" Body="&lt;p&gt;I would like to get a smallish laptop for home computing and web app dev. I am new to elementary OS but would like to use linux. Will I be able to get elementary OS running on this machine?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;SPECS:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor &amp;amp; Memory:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Intel® Core™ i5-8265U Processor at 1.6GHz&#xA;8GB DDR4 2400MHz RAM (1-DIMM)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Drives:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;256GB PCIe NVMe M.2 Solid State Drive&#xA;No Optical Drive&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Operating System:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Microsoft® Windows 10 Home (64 bit)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Communications:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Realtek Wireless-AC WLAN + Bluetooth® 4.2&#xA;HP TrueVision HD Webcam + Integrated Digital Microphones&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Graphics &amp;amp; Video:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;14&quot; SVA BrightView WLED-backlit HD (1366 x 768) Display&#xA;Intel UHD 620 Graphics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Audio:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HD Audio with Stereo Speakers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Keyboard:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Full-size island-style Backlit Keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Ports:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1x USB 3.1 Type-C&#xA;2x USB 3.1&#xA;1x HDMI 1.4b&#xA;1x Multi-Format Digital Media Card Reader&#xA;1x Combination Headphone-Out/Microphone-In Jack&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Power Supply:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;3-Cell 41WHr Lithium-Ion Battery  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16580" LastEditorUserId="18048" LastEditDate="2019-05-07T09:06:51.287" LastActivityDate="2019-07-12T23:31:15.460" Title="HP 14&quot; latptop a good choice for elementary OS - Model 14-cf1015cl" Tags="|hardware|laptop|hp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17372" PostTypeId="2" ParentId="17371" CreationDate="2018-12-03T22:35:45.577" Score="2" Body="&lt;p&gt;It will work however you'll probably need to update the kernel and some packages since that cpu model is pretty new.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to be completely sure that it works, look for a laptop that comes with Ubuntu 18.04 or lower preinstalled. Those will surely work with elementary. There are companies like System76, Purism or Dell that offer that kind of laptops.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-12-03T22:35:45.577" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17373" PostTypeId="1" CreationDate="2018-12-04T06:18:14.100" Score="0" ViewCount="345" Body="&lt;p&gt;I am running eos &lt;code&gt;juno&lt;/code&gt; on a razer blade late 2016 model &lt;a href=&quot;/questions/tagged/laptop&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;laptop&amp;#39;&quot; rel=&quot;tag&quot;&gt;laptop&lt;/a&gt;. I tried to do a &lt;code&gt;sudo apt-get update&lt;/code&gt; &amp;amp;&amp;amp; &lt;code&gt;upgrade&lt;/code&gt; on terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:13 http://in.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages             &#xA;  Hash Sum mismatch&#xA;  Hashes of expected file:&#xA;   - Filesize:396740 [weak]&#xA;   - SHA256:869bb9c17b16319836d7a130aac89e549eeb7488657b6374c19884b689a487c5&#xA;   - SHA1:dff8b40c44ef805efcf589ba33a916f7f88c38da [weak]&#xA;   - MD5Sum:f91b2998ad4c92a55f05838802d0a456 [weak]&#xA;  Hashes of received file:&#xA;   - SHA256:3bb6e57d5b785359e3004a22f92a10288522dcb59b50dc4f7c456f212869a2d0&#xA;   - SHA1:1d46dffcdce50fd18f9d2d8d0a799ff09d8802c3 [weak]&#xA;   - MD5Sum:05bbf3f0beb7304ace1596f15357954d [weak]&#xA;   - Filesize:396740 [weak]&#xA;  Last modification reported: Tue, 04 Dec 2018 01:28:06 +0000&#xA;  Release file created at: Tue, 04 Dec 2018 01:27:51 +0000 &#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16582" LastEditorUserId="14940" LastEditDate="2018-12-05T23:45:14.970" LastActivityDate="2018-12-05T23:45:14.970" Title="Getting an error on update" Tags="|updates|release-juno|apt|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17374" PostTypeId="2" ParentId="17373" CreationDate="2018-12-04T06:42:14.267" Score="1" Body="&lt;p&gt;AFAIK this happens when repositories are about or in the middle of their refreshment, you just got bad timing&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;To fix it just run:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The you can run&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To explain the solution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll remove the repo index and release files from your system. Those are updated every time you run &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then when you run the update they'll get populated, this time valid&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can continue using &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-04T06:42:14.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17375" PostTypeId="2" ParentId="15718" CreationDate="2018-12-04T10:07:32.150" Score="1" Body="&lt;p&gt;It looks like there are two different errors here:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The first is that it looks like the AppCenter has been added twice. I'm not sure what has done this, but apt doesn't handle the same repository being configured twice very well. It's configured once in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; on line 56. And once in &lt;code&gt;/etc/apt/sources.list.d/appcenter.list&lt;/code&gt;. The original/correct place for this is the &lt;code&gt;/etc/apt/sources.list.d/appcenter.list&lt;/code&gt; file, so I would recommend removing the AppCenter line from &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Secondly, it looks like apt is having some issues writing some metadata due to &lt;code&gt;Permission denied&lt;/code&gt; errors on two files. It may be worth trying to remove these with the following command (they should be automatically re-downloaded on the next &lt;code&gt;apt update&lt;/code&gt;):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /var/lib/apt/lists/partial/pt.archive.ubuntu.com_ubuntu_dists_xenial-backports_main_dep11_icons-64x64.tar.gz /var/lib/apt/lists/partial/pt.archive.ubuntu.com_ubuntu_dists_xenial-updates_restricted_dep11_Components-amd64.yml.gz&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-12-04T10:07:32.150" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17376" PostTypeId="2" ParentId="16325" CreationDate="2018-12-04T10:45:33.650" Score="1" Body="&lt;p&gt;&lt;code&gt;dpkg -i&lt;/code&gt; is a really low level way of installing a &lt;code&gt;.deb&lt;/code&gt; file and does not handle dependencies at all. I would suggest removing slack again using &lt;code&gt;sudo dpkg -r slack-desktop&lt;/code&gt; and then re-installing using one of the following methods:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; from the AppCenter and install the .deb file via that.&lt;/li&gt;&#xA;&lt;li&gt;Use &lt;code&gt;sudo apt install ./slack-desktop-3.3.1-amd64.deb&lt;/code&gt; or &lt;code&gt;sudo apt install /path/to/slack-desktop-3.3.1-amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Both of these methods should resolve dependencies for Slack and install them automatically. If these solutions don't help you, please post further information and terminal output regarding the issues you are having.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-12-04T10:45:33.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17377" PostTypeId="1" AcceptedAnswerId="17415" CreationDate="2018-12-04T15:25:00.347" Score="0" ViewCount="93" Body="&lt;p&gt;I'm used to navigating myself using the keyboard through the &lt;a href=&quot;/questions/tagged/files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;files&amp;#39;&quot; rel=&quot;tag&quot;&gt;files&lt;/a&gt; app, and until &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;, I could select particular files in a folder by using &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt;. Looks like in &lt;code&gt;Juno&lt;/code&gt;, this shortcut has changed to open the file I'm trying to additionally select after the first one selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to make it behave as earlier, or is there another shortcut that could be used to select particular files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I know about &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Mouse Click&lt;/kbd&gt;, but I'm interested in a solution not involving using a mouse.&lt;/p&gt;&#xA;" OwnerUserId="177" LastEditorUserId="14940" LastEditDate="2018-12-04T20:45:17.033" LastActivityDate="2018-12-07T11:06:53.210" Title="How to select (cherry-pick) files in Files using keyboard only? (Juno)" Tags="|pantheon-files|release-juno|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17378" PostTypeId="2" ParentId="14367" CreationDate="2018-12-04T17:52:15.090" Score="0" Body="&lt;p&gt;After downloading the sav-linux-free-9.tgz file, it will be in the Downloads folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes, like you said, the instructions say to copy it to a temporary directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1)&lt;/strong&gt; Create the directory (I use /opt): &lt;code&gt;sudo mkdir /opt/sophos&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2)&lt;/strong&gt; From your downloads folder, extract the file into the newly created folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo tar -xzvf sav-linux-free-9.tgz -C /opt/sophos&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3)&lt;/strong&gt; Change to the folder: &lt;code&gt;cd /opt/sophos&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4)&lt;/strong&gt; Install Sophos: &lt;code&gt;sudo ./sophos-av/install.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;5)&lt;/strong&gt; For most of the prompts, you can select the default. But when prompted for Free or Supported, choose Free.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bPbYi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bPbYi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2018-12-04T17:52:15.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17379" PostTypeId="1" AcceptedAnswerId="17380" CreationDate="2018-12-04T18:01:55.950" Score="0" ViewCount="248" Body="&lt;p&gt;Yesterday I did a &lt;code&gt;apt dist-upgrade&lt;/code&gt; on my &lt;code&gt;Juno&lt;/code&gt; installation. This morning I found my PC &lt;strong&gt;unbootable&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I couldn't find a fix for it, I started to reinstall my system. After a clean install (on a different SSD, but exactly the same make and model) I performed an &lt;code&gt;apt dist-upgrade&lt;/code&gt;. Then I noticed the following in the apt output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Setting up grub-pc (2.02-2ubuntu8.9+elementary8~ubuntu5.0.1) ...&#xA;Installing for i386-pc platform.&#xA;Installation finished. No error reported.&#xA;Generating grub configuration file ...&#xA;Found linux image: /boot/vmlinuz-4.15.0-42-generic&#xA;Found linux image: /boot/vmlinuz-4.15.0-36-generic&#xA;Found initrd image: /boot/initrd.img-4.15.0-36-generic&#xA;/usr/sbin/grub-probe: error: unknown filesystem.&#xA;Found elementary OS 5.0 Juno (5.0) on /dev/sdb2&#xA;/usr/sbin/grub-probe: error: unknown filesystem.&#xA;done Setting up libirs160:amd64 (1:9.11.3+dfsg-1ubuntu1.3) ...&#xA;Setting up libbind9-160:amd64 (1:9.11.3+dfsg-1ubuntu1.3) ...&#xA;Setting up libdpkg-perl (1.19.0.5ubuntu2.1) ...&#xA;Setting up libgala0:amd64 (0.3.2~r672+pkg45~ubuntu5.0.1) ...&#xA;Setting up pantheon-greeter (3.3.1+r676+pkg59~ubuntu5.0.1) ...&#xA;Setting up python3-apport (2.20.9-0ubuntu7.5) ...&#xA;Setting up network-manager-config-connectivity-ubuntu (1.10.6-2ubuntu1.1) ...&#xA;Setting up libsmbclient:amd64 (2:4.7.6+dfsg~ubuntu-0ubuntu2.5) ...&#xA;Setting up ubuntu-drivers-common (1:0.5.2.2) ...&#xA;Setting up gala (0.3.2~r672+pkg45~ubuntu5.0.1) ...&#xA;Setting up switchboard-plug-pantheon-shell (2.7.2+r807~ubuntu5.0.1) ...&#xA;Setting up noise (5.0.1+r2647+pkg111~ubuntu5.0.1) ...&#xA;Setting up linux-image-generic (4.15.0.42.44) ...&#xA;Setting up switchboard-plug-users (2.2.0+r558~ubuntu5.0.1) ...&#xA;Setting up bind9-host (1:9.11.3+dfsg-1ubuntu1.3) ...&#xA;Setting up dnsutils (1:9.11.3+dfsg-1ubuntu1.3) ...&#xA;Setting up linux-generic (4.15.0.42.44) ...&#xA;Processing triggers for libc-bin (2.27-3ubuntu1) ...&#xA;Processing triggers for initramfs-tools (0.130ubuntu3.5) ...&#xA;update-initramfs: Generating /boot/initrd.img-4.15.0-36-generic&#xA;Processing triggers for linux-image-4.15.0-42-generic (4.15.0-42.45) ...&#xA;/etc/kernel/postinst.d/initramfs-tools: update-initramfs: Generating /boot/initrd.img-4.15.0-42-generic&#xA;/etc/kernel/postinst.d/zz-update-grub: Generating grub configuration file ...&#xA;Found linux image: /boot/vmlinuz-4.15.0-42-generic&#xA;Found initrd image: /boot/initrd.img-4.15.0-42-generic&#xA;Found linux image: /boot/vmlinuz-4.15.0-36-generic&#xA;Found initrd image: /boot/initrd.img-4.15.0-36-generic&#xA;/usr/sbin/grub-probe: error: unknown filesystem.&#xA;Found elementary OS 5.0 Juno (5.0) on /dev/sdb2&#xA;/usr/sbin/grub-probe: error: unknown filesystem. done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There were several &lt;code&gt;grub2&lt;/code&gt; packages in the upgrade. So I think the problem might be in the packages?&#xA;Has anyone an idea for me to proceed? I don't want to reboot my system right now in fear of not being able to boot up again.&#xA;Is there any way to fix this? Any solution I found in the internet didn't work, hence the reinstall.&lt;/p&gt;&#xA;" OwnerUserId="16587" LastEditorUserId="14940" LastEditDate="2018-12-05T23:42:29.190" LastActivityDate="2018-12-05T23:42:29.190" Title="Grub2 unknown filesystem after apt dist-upgrade" Tags="|updates|boot|release-juno|apt|grub|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17380" PostTypeId="2" ParentId="17379" CreationDate="2018-12-04T21:28:51.947" Score="0" Body="&lt;p&gt;Based on you comment I have a possible solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw a comment on another forum of another distro (Archilinux) that having the external drive connected caused this. Disconnect it and try again by running the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;A side question (use comments to answer), what format has hat external drive?&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-04T21:28:51.947" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17381" PostTypeId="1" CreationDate="2018-12-04T22:13:48.430" Score="0" ViewCount="465" Body="&lt;p&gt;I'm having trouble with my audio drivers after I switched from a Dell XPS 8500 to a custom build with a Ryzen 5 2600X for my processor, Gigabyte Aorus Gaming 5 Wifi x470 for my motherboard, and a Sapphire Radeon RX 580 video card. I used the same hard drive as before, so I didn't reinstall eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The sound card for the mobo is an Intel ALC-1220-VB. I have tried force reloading and re-installing ALSA using the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge alsa-base pulseaudio&#xA;sudo apt-get install alsa-base pulseaudio&#xA;sudo alsa force-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additionally,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep -i audio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does recognize 2 audio cards. The first one appears to the audio card on the video card, the latter should be the mobo's audio card right?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Ellesmere [Radeon RX 580]&#xA;0b:00.3 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 00h-0fh) HD Audio Controller&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've searched on Google a fair bit and tried a bunch of other things but I can't find those pages anymore and none of them worked. How do I resolve this issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;New wrinkle: GNOME Alsa Mixer identified a USB audio device. Curious, I tried plugging my speakers into the front panel of my PC. That headphone jack is working. The AC1220 still produces no signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I think I figured something out. I don't know how to fix this but it seems to be a diagnosis.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep -i audio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Returns 2 audio cards, but these are my video card and the front panel headphone jack. The following&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci | grep -i 1220&#xA;lspci | grep -i ALC1220&#xA;lspci | grep -i realtek&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Return nothing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;aplay -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does recognize ALC1220 as&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;card 2: Generic [HD-Audio Generic], device 0: ALC1220 Analog [ALC1220 Analog]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 2: Generic [HD-Audio Generic], device 1: ALC1220 Digital [ALC1220 Digital]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Does this identify the issue?&lt;/p&gt;&#xA;" OwnerUserId="16591" LastEditorUserId="16591" LastEditDate="2018-12-06T00:52:22.120" LastActivityDate="2023-12-11T11:03:20.380" Title="No audio after new hardware in eOS Juno" Tags="|release-juno|desktop|drivers|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17382" PostTypeId="1" AcceptedAnswerId="17383" CreationDate="2018-12-05T02:28:30.157" Score="0" ViewCount="526" Body="&lt;p&gt;Hi everyone I just downloaded Netbeans IDE from the appcenter and it doesn't open. The start up screen shows up as if it was trying to load and then it shuts itself up. Anyone who might know why?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I open it on the console it shows the next message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: An illegal reflective access operation has occurred&#xA;&#xA;WARNING: Illegal reflective access by org.netbeans.ProxyURLStreamHandlerFactory (file:/usr/share/netbeans/platform18/lib/boot.jar) to field java.net.URL.handler&#xA;&#xA;WARNING: Please consider reporting this to the maintainers of org.netbeans.ProxyURLStreamHandlerFactory&#xA;&#xA;WARNING: Use --illegal-access=warn to enable warnings of further illegal reflective access operations&#xA;&#xA;WARNING: All illegal access operations will be denied in a future release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16564" LastEditorUserId="15904" LastEditDate="2018-12-05T02:36:41.383" LastActivityDate="2018-12-05T03:58:44.357" Title="Netbeans doesn't start" Tags="|release-juno|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17383" PostTypeId="2" ParentId="17382" CreationDate="2018-12-05T03:58:44.357" Score="0" Body="&lt;p&gt;There's a known problem between Netbeans version and the JDK version&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/netbeans/+bug/1760907&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/netbeans/+bug/1760907&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1032030/netbeans-does-not-start-on-fresh-ubuntu-18-04-installation&quot;&gt;https://askubuntu.com/questions/1032030/netbeans-does-not-start-on-fresh-ubuntu-18-04-installation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Solution&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Just &lt;strong&gt;remove&lt;/strong&gt; Netbeans (and keep reading to install it)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt autoremove netbeans&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Installing Netbeans the Flatpak Way (current version 9.0)&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Add&lt;/strong&gt; the Oficial PPA repo (1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:alexlarsson/flatpak&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt; Flatpak&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install flatpak&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Add&lt;/strong&gt; flathub repo to flatpak&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt; Netbeans&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo flatpak install flathub org.apache.netbeans&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To &lt;strong&gt;run&lt;/strong&gt; Netbeans&#xA;use the command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;flatpak run org.apache.netbeans&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or use the icon in the menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://flatpak.org/setup/Ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/setup/Ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/apps/details/org.apache.netbeans&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/org.apache.netbeans&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Notes&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;(1): If you get command not found on &lt;code&gt;add-apt-repository&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt;:&#xA;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Flatpak Q&amp;amp;A&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flatpak.org/faq/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/faq/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-05T03:58:44.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17384" PostTypeId="2" ParentId="16493" CreationDate="2018-12-05T04:12:39.420" Score="1" Body="&lt;p&gt;I just went through the same thing here installing and uninstalling - printer would get detected and seem to install correctly, and then the same error after a print job, &quot;missing filter&quot;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I finally got it by going into CUPS and reconfiguring the printer.  At the part to chose a driver, I chose a different driver than the currently selected one. For mine, there was an &lt;strong&gt;hpcups&lt;/strong&gt; version and an &lt;strong&gt;hpijs&lt;/strong&gt; which was the currently selected driver.  Upon changing to the hpcups driver, the system prompted me that the driver wasn't found and asked to download from HP or if I had a copy locally already to use it. I selected download from HP and at this point an HP Utility popped up to select and download it (I'm guessing that this was the HP Device Manager, or hp-setup).  Problem was it was asking for the root password and nothing else in order to download and install (my password wouldn't work and there was no function to use sudo).  So I had to first set a root password, enter it into the HP utility and then it downloaded and carried on successfully.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point I'm now using a driver downloaded from HP and using the &quot;hpcups&quot; driver, not the default hpijs.  When I printed a test page, it worked!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;when you read the hplip docs, there is a part that specifically says that you need to set a root password in order for the installation to work, and I believe that this was the cause of the error.  Unfortunately printing in Linux is like a foreign language to me, but hopefully this crude walk-through helps someone.&lt;br&gt;&#xA;Ensure you install hplip, hplip-gui, hplip-doc.  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install hplip hplip-doc hplip-gui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11732" LastEditorUserId="17820" LastEditDate="2019-04-09T18:09:53.843" LastActivityDate="2019-04-09T18:09:53.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17386" PostTypeId="1" AcceptedAnswerId="17406" CreationDate="2018-12-05T06:28:34.393" Score="1" ViewCount="83" Body="&lt;p&gt;Some apps can't be found in the AppCenter in Juno. When I visit their pages on appcenter.elementary.io, such as for &lt;a href=&quot;https://appcenter.elementary.io/com.github.kjlaw89.webwatcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Web Watcher&lt;/a&gt;, they give the following message:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Note: This app is only available for elementary OS Loki. If you’re on&#xA;  elementary OS Juno, it will not appear in AppCenter. You can reach out&#xA;  to the developer and ask that they update it for Juno.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;How much work does it require for the dev to update it for Juno? If it's not a lot of work, then I'll ask the developer to do that.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2018-12-06T11:45:14.077" Title="What does it require for Loki apps to be made available in Juno?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17387" PostTypeId="2" ParentId="17312" CreationDate="2018-12-05T09:18:39.653" Score="0" Body="&lt;p&gt;on my case, i can't even try Juno, I got a black screen for 3 seconds and my laptop reboot..&#xA;I tried with different kernel parameter nomodeset, nouveau.modeset=0, acpi=off i915.modeset=0, same issue&lt;/p&gt;&#xA;&#xA;&lt;p&gt;system config : i7 6700HQ, nvidia GTX950m, Samsung SM951 128GB M.2 PCI-e ACHI SSD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I stuck with Loki until I can fix the issue&lt;/p&gt;&#xA;" OwnerUserId="4577" LastActivityDate="2018-12-05T09:18:39.653" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17390" PostTypeId="1" AcceptedAnswerId="17412" CreationDate="2018-12-05T14:22:29.240" Score="1" ViewCount="77" Body="&lt;p&gt;I have a question, and I don't know if it's a problem with my hardware or not.&#xA;The fact is that my computer is being recognized by Juno OS as a desktop computer and not as laptop. I wonder why, because everything works well and nothing is missing (battery indicator etc.).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a hp pavilion 13 convertible 2 in 1.&#xA;I'm not sure whether more information is needed in this case or not, waiting for answers and requests for more info about my hardware.&#xA;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7EaGT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7EaGT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastEditorUserId="15904" LastEditDate="2018-12-05T19:11:40.143" LastActivityDate="2018-12-06T18:41:26.880" Title="Why my computer is not being recognized as a laptop?" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17392" PostTypeId="2" ParentId="17390" CreationDate="2018-12-05T15:43:09.537" Score="1" Body="&lt;p&gt;I don't think it's a problem, I've tried some notebook and the same goes, I think it's normal. I will continue testing on other laptops. but apparently it is normal. don't worry.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-12-05T15:43:09.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17395" PostTypeId="1" CreationDate="2018-12-05T16:57:09.887" Score="1" ViewCount="793" Body="&lt;p&gt;Since updating to &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;, from &lt;a href=&quot;/questions/tagged/release-loki&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-loki&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-loki&lt;/a&gt;, the &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; disconnects after a period of time (around 15-20 minutes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using a Toshiba Satellite. I've checked the power settings, and when plugged in the machine is set to never suspend. I didn't have this problem on Loki, so I'm assuming it's a setting I'm not seeing in the Settings, or can be solved by command line.&lt;/p&gt;&#xA;" OwnerUserId="7546" LastEditorUserId="14940" LastEditDate="2018-12-08T21:18:16.420" LastActivityDate="2019-05-08T03:03:50.673" Title="WiFi disconnects after a period of time" Tags="|wifi|release-juno|suspend|laptop|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17396" PostTypeId="2" ParentId="17381" CreationDate="2018-12-05T17:32:47.280" Score="0" Body="&lt;p&gt;search in appcenter. GNOME ALSA Mixer. verify that it is not muted. It seems ridiculous, but try it, it worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;please let us know if it works for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2018-12-05T17:32:47.280" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17397" PostTypeId="1" CreationDate="2018-12-05T17:59:27.083" Score="0" ViewCount="643" Body="&lt;p&gt;I have installed Juno on a thinkpad t480 (no dual boot, i7, 8th gen) and it worked flawessly until i pulled the usb-c (with 2 ext monitors, ethernet) out. The screen went black and booting takes me past the logo into a loop where the black screen yields a single underscore dash prompt in the very top left corner for about a second before disappearing again for another second. It just loops from there.&#xA;I have tried ctrl+alt+f1 and it shows text mode for about half a second with no option/chance of logging in via tty.&#xA;Secure boot is disabled.&#xA;There's no clear instructions anywhere on how or what to do in the grub interface (2.02).&#xA;Is it the boot sequence or the actual kernel that's corrupt?&#xA;Is there a way to repair my installation from the usb installer?&#xA;How can I prevent this form happening again? I really would like to stay in Juno and not go back to regular Ubuntu.&#xA;What am I missing? Any help is appreciated, thanks!&lt;/p&gt;&#xA;" OwnerUserId="16602" LastActivityDate="2019-01-10T10:00:33.943" Title="Juno boot loop AFTER logo" Tags="|boot|release-juno|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17400" PostTypeId="1" CreationDate="2018-12-05T21:10:26.443" Score="1" ViewCount="303" Body="&lt;p&gt;I am wondering if anyone has a cure for an issue where usage of the nvidia drivers cause the computer to freeze when resuming from a suspended state.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't have this issue if I remove all the nvidia drivers, but I'm pretty sure it is defaulting to the intel gfx and I would like to use the GPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used the 390, 410, and 415 drivers.  All have the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specs: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell XPS 15 9570  &lt;/li&gt;&#xA;&lt;li&gt;GeForce GTX 1050 Ti Mobile&lt;/li&gt;&#xA;&lt;li&gt;16 GB RAM&lt;/li&gt;&#xA;&lt;li&gt;i7-8750H CPU&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16603" LastEditorUserId="16603" LastEditDate="2018-12-06T15:47:22.953" LastActivityDate="2020-05-10T10:40:10.023" Title="Nvidia drivers cause freeze when resuming from suspend" Tags="|release-juno|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17404" PostTypeId="1" AcceptedAnswerId="17407" CreationDate="2018-12-06T11:38:02.350" Score="1" ViewCount="69" Body="&lt;p&gt;Since Juno i can't use the &quot;up&quot; command. In loki with the backspace key i was able to use it. There is some way to do this?&#xA;Thanks &lt;/p&gt;&#xA;" OwnerUserId="16439" LastActivityDate="2018-12-06T15:52:38.000" Title="'Up' shortcut in Files not working anymore" Tags="|pantheon-files|release-juno|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ClosedDate="2019-02-20T01:57:31.667" ContentLicense="CC BY-SA 4.0" />
  <row Id="17406" PostTypeId="2" ParentId="17386" CreationDate="2018-12-06T11:45:14.077" Score="1" Body="&lt;p&gt;In theory, not a lot is required for publishing/updating an app for Juno. In most cases, it should just be a case of building and testing the app on Juno against the new library versions and publishing a new release for review.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes there is a bit more work required if any of the underlying libraries have changed or had deprecations since the last release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, for the app you mention specifically, it looks as though there has been very little activity from the developer. There hasn't been any commits since May 2018 and an issue was opened on the Github page asking if it was going to be published for Juno with no response: &lt;a href=&quot;https://github.com/kjlaw89/webwatcher/issues/24&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/kjlaw89/webwatcher/issues/24&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may consider forking the application, making some minor improvements and then publishing to Juno yourself.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-12-06T11:45:14.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17407" PostTypeId="2" ParentId="17404" CreationDate="2018-12-06T11:55:49.270" Score="1" Body="&lt;p&gt;This shortcut has been removed from Files and has started being removed from major browsers too as it leads to unpredictable behavior. The backspace key is intended to delete the character before the cursor, not do anything else.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an alternative shortcut in &lt;a href=&quot;/questions/tagged/files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;files&amp;#39;&quot; rel=&quot;tag&quot;&gt;files&lt;/a&gt; which is &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Left Arrow&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="14940" LastEditDate="2018-12-06T15:52:38.000" LastActivityDate="2018-12-06T15:52:38.000" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17408" PostTypeId="2" ParentId="17395" CreationDate="2018-12-06T12:48:40.497" Score="1" Body="&lt;p&gt;Do you have tlp (linux advanced power management) installed?&#xA;If the answer is yes you could install the tlpui and disable the power saving mode when in battery, and see if it still happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install tlpui :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linuxuprising/apps&#xA;sudo apt update&#xA;sudo apt install tlpui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Page of reference: &lt;a href=&quot;https://www.linuxuprising.com/2018/11/install-tlpui-in-ubuntu-or-linux-mint.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxuprising.com/2018/11/install-tlpui-in-ubuntu-or-linux-mint.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2018-12-06T12:48:40.497" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17412" PostTypeId="2" ParentId="17390" CreationDate="2018-12-06T18:41:26.880" Score="3" Body="&lt;h1&gt;Short answer&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Convertibles were not being recognized as laptops, but were falling back to a generic &quot;computer&quot; icon. This has been fixed in the latest release of the icons and will show up in your &quot;Operating System Updates&quot; in AppCenter soon!&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Longer/technical answer&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The &quot;About&quot; screen in System Settings uses a local service to populate some information, like the hostname and the icon name to use to represent the hardware. That service was correctly reporting &lt;code&gt;computer-convertible&lt;/code&gt; as the icon name. However, our icon set did not have a &lt;code&gt;computer-convertible&lt;/code&gt; icon, so it correctly fell back to use the &lt;code&gt;computer&lt;/code&gt; icon, which is represented by an all-in-one type computer. We've now &lt;a href=&quot;https://github.com/elementary/icons/pull/739&quot; rel=&quot;nofollow noreferrer&quot;&gt;added a symlink&lt;/a&gt; from &lt;code&gt;computer-convertible&lt;/code&gt; to &lt;code&gt;computer-laptop&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2018-12-06T18:41:26.880" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17413" PostTypeId="1" CreationDate="2018-12-06T20:41:41.340" Score="0" ViewCount="81" Body="&lt;p&gt;Is there any way to change the mount rules on &lt;a href=&quot;/questions/tagged/files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;files&amp;#39;&quot; rel=&quot;tag&quot;&gt;files&lt;/a&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's &lt;code&gt;showexec&lt;/code&gt; by default and I need it to mount as &lt;code&gt;exec&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16613" LastEditorUserId="14940" LastEditDate="2018-12-08T21:18:08.783" LastActivityDate="2019-05-07T23:02:00.397" Title="How to change usb mount rules?" Tags="|pantheon-files|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17414" PostTypeId="1" CreationDate="2018-12-07T02:20:07.133" Score="1" ViewCount="882" Body="&lt;p&gt;When trying to install the elementary OS 5.0 on system fails - the installer crashed even before starting to copy files. The bootable usb was created with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dd if=&amp;lt;/path/to/eOS.iso&amp;gt; of=&amp;lt;/path/to/device&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;System booted in UEFI + Secure Boot enabled. But with same iso i can install on VirtualBox VM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;screenshot -&lt;a href=&quot;https://i.stack.imgur.com/bAnaX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bAnaX.png&quot; alt=&quot;IO/Error&quot;&gt;&lt;/a&gt;&#xA;installer - crashed screen &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XUFFE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XUFFE.png&quot; alt=&quot;installer-crashed screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As indicated it seems like IO error for the bootable device. So tried check media for defects - The option doesn't perform any checks and system restarts again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then tried with another usb bootable - the same issue. The logs from /var/log/installer/dm&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(nm-applet:1263): Gtk-CRITICAL **: 15:23:29.696: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&#xA;(nm-applet:1263): Gtk-WARNING **: 15:23:29.704: Can't set a parent on widget which has a parent&#xA;ubiquity-dm: greeter exited with code 1&#xA;ubiquity-dm: Failed with an exception:&#xA;ubiquity-dm: Traceback (most recent call last):&#xA;  File &quot;/usr/bin/ubiquity-dm&quot;, line 885, in main&#xA;    ret = run(vt, display, username)&#xA;  File &quot;/usr/bin/ubiquity-dm&quot;, line 860, in run&#xA;    ret = dm.run(*sys.argv[4:])&#xA;  File &quot;/usr/bin/ubiquity-dm&quot;, line 749, in run&#xA;    db = DebconfCommunicator('ubiquity', cloexec=True)&#xA;  File &quot;/usr/lib/ubiquity/ubiquity/debconfcommunicator.py&quot;, line 37, in __init__&#xA;    write=self.dccomm.stdin)&#xA;  File &quot;/usr/lib/python3/dist-packages/debconf.py&quot;, line 71, in __init__&#xA;    self.setUp(title)&#xA;  File &quot;/usr/lib/python3/dist-packages/debconf.py&quot;, line 74, in setUp&#xA;    self.version = self.version(2)&#xA;  File &quot;/usr/lib/python3/dist-packages/debconf.py&quot;, line 83, in &amp;lt;lambda&amp;gt;&#xA;    lambda *args, **kw: self.command(command, *args, **kw))&#xA;  File &quot;/usr/lib/python3/dist-packages/debconf.py&quot;, line 104, in command&#xA;    status = int(status)&#xA;ValueError: invalid literal for int() with base 10: ''&#xA;&#xA;Gdk-Message: 20:56:26.952: nm-applet: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;Gdk-Message: 20:56:26.953: gsd-power: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;Gdk-Message: 20:56:26.953: gsd-xsettings: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;Gdk-Message: 20:56:26.953: gsd-clipboard: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;Gdk-Message: 20:56:26.954: gala: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;Gdk-Message: 20:56:26.954: gsd-media-keys: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;&#xA;XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server &quot;:0&quot;&#xA;      after 461 requests (461 known processed) with 0 events remaining.&#xA;(II) Server terminated successfully (0). Closing log file.&#xA;dbus-daemon[1262]: Activating service name='org.a11y.atspi.Registry' requested by ':1.8' (uid=999 pid=20661 comm=&quot;/usr/lib/gnome-session/gnome-session-check-acceler&quot; label=&quot;unconfined&quot;)&#xA;dbus-daemon[1262]: Successfully activated service 'org.a11y.atspi.Registry'&#xA;SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There are so many messages in debug log to show here here are some that I get repetitively -&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(ubiquity:1270): IBUS-WARNING **: 15:15:19.994: The owner of /home/elementary/.config/ibus/bus is not root!&#xA;/usr/lib/ubiquity/ubiquity/frontend/gtk_components/nmwidgets.py:5: PyGIWarning: NM was imported without specifying a version first. Use gi.require_version('NM', '1.0') before import to ensure that the right version gets loaded.&#xA;...&#xA;/usr/lib/ubiquity/plugins/ubi-console-setup.py:74: Warning: Source ID 2019 was not found when attempting to remove it&#xA;  GLib.source_remove(self.keyboard_variant_timeout_id)&#xA;...&#xA;/usr/lib/ubiquity/ubiquity/segmented_bar.py:34: PyGIWarning: PangoCairo was imported without specifying a version first. Use gi.require_version('PangoCairo', '1.0') before import to ensure that the right version gets loaded.&#xA;  from gi.repository import GObject, Gdk, Gtk, PangoCairo&#xA;&#xA;(ubiquity:1270): Gtk-CRITICAL **: 15:18:11.401: gtk_widget_set_allocation: assertion '_gtk_widget_get_visible (widget) || _gtk_widget_is_toplevel (widget)' failed&#xA;...&#xA;(ubiquity:1270): Gtk-CRITICAL **: 15:19:59.249: gtk_widget_set_allocation: assertion '_gtk_widget_get_visible (widget) || _gtk_widget_is_toplevel (widget)' failed&#xA;...&#xA;No such schema “com.canonical.indicator.session”&#xA;/usr/lib/ubiquity/plugins/ubi-timezone.py:98: PyGIWarning: Soup was imported without specifying a version first. Use gi.require_version('Soup', '2.4') before import to ensure that the right version gets loaded.&#xA;  from gi.repository import Gtk, GObject, GLib, Soup&#xA;/usr/lib/ubiquity/plugins/ubi-timezone.py:209: Warning: Source ID 14696 was not found when attempting to remove it&#xA;  GLib.source_remove(self.timeout_id)&#xA;/usr/lib/ubiquity/plugins/ubi-timezone.py:209: Warning: Source ID 14752 was not found when attempting to remove it&#xA;  GLib.source_remove(self.timeout_id)&#xA;/usr/lib/ubiquity/plugins/ubi-timezone.py:209: Warning: Source ID 14810 was not found when attempting to remove it&#xA;  GLib.source_remove(self.timeout_id)&#xA;Ecryptfs is deprecated&#xA;Ecryptfs is deprecated&#xA;/usr/lib/ubiquity/plugins/ubi-usersetup.py:394: Warning: Source ID 15095 was not found when attempting to remove it&#xA;  GLib.source_remove(self.hostname_timeout_id)&#xA;...&#xA;Gtk-Message: 20:56:22.084: GtkDialog mapped without a transient parent. This is discouraged.&#xA;No such schema “com.canonical.indicator.session”&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Can someone help in understanding why it failed?&lt;/p&gt;&#xA;" OwnerUserId="16614" LastEditorUserId="18048" LastEditDate="2019-05-07T05:11:42.847" LastActivityDate="2019-10-04T07:02:10.297" Title="elementary OS Juno installer crashed" Tags="|system-installation|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17415" PostTypeId="2" ParentId="17377" CreationDate="2018-12-07T11:06:53.210" Score="1" Body="&lt;p&gt;This looks like a regression :-(. You can select the item under the cursor using &lt;code&gt;&amp;lt;Ctrl&amp;gt;&amp;lt;Alt&amp;gt;plus&lt;/code&gt; or &lt;code&gt;&amp;lt;Ctrl&amp;gt;&amp;lt;Alt&amp;gt;equal&lt;/code&gt; (and deselect with &lt;code&gt;&amp;lt;Ctrl&amp;gt;&amp;lt;Alt&amp;gt;minus&lt;/code&gt;) but there does not seem to be a way of moving the cursor to another item without losing the existing selection and without selecting the new item under the cursor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll raise an issue on GitHub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem with &lt;code&gt;&amp;lt;Ctrl&amp;gt;&amp;lt;Space&amp;gt;&lt;/code&gt; is that it clashes with the shortcut to change the input method.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-12-07T11:06:53.210" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17416" PostTypeId="2" ParentId="17413" CreationDate="2018-12-07T11:33:42.573" Score="1" Body="&lt;p&gt;Files uses GLib functions for mounting and they do not provide any MountFlags to influence this.  Maybe we could use the Linux.mount function, which does allow control over such options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suggest raising a wishlist issue on GitHub at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2018-12-07T11:33:42.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17419" PostTypeId="2" ParentId="16519" CreationDate="2018-12-07T15:53:39.140" Score="16" Body="&lt;p&gt;This is a known bug: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-power/issues/89&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a workaround near the (current) bottom of the page:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;This problem is because the power settings are used from the gconf configuration of the user lightdm, and not the current user.&#xA;  Just test:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;su - -s /bin/bash lightdm&#xA;gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you change the settings of the user lightdm, the problem disappears&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;A little further down, it says you need to set the key to &quot;nothing&quot; (still as the lightdm user):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You might get a message &lt;code&gt;No protocol specified&lt;/code&gt;, which you can ignore.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastEditorUserId="15702" LastEditDate="2019-07-23T13:12:22.683" LastActivityDate="2019-07-23T13:12:22.683" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17420" PostTypeId="2" ParentId="16224" CreationDate="2018-12-07T16:48:56.030" Score="0" Body="&lt;p&gt;Skype is available for Linux from the &lt;a href=&quot;https://www.skype.com/en/get-skype/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Skype website.&lt;/a&gt; as a .deb package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Grab the latest version of Skype and then open up a terminal window. Using the &lt;code&gt;cd&lt;/code&gt; command, move the terminal window into the &lt;code&gt;~/Downloads&lt;/code&gt; directory:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, to install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i skypeforlinux-64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Usually the process, in this case, will terminate with an error. To fix it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There is also, as mentioned above, a dedicated app for elementary that manages and installs .deb files.You can follow the direct link to the app &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy - direct link&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helped you.&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2018-12-07T16:48:56.030" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17421" PostTypeId="2" ParentId="15616" CreationDate="2018-12-07T18:13:01.057" Score="0" Body="&lt;p&gt;maybe not exactly what you are looking for. But I use TLP for power saving. And it has a nice settings in config file to manage wireless interfaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So try &lt;code&gt;sudo apt-get install -y tlp tlp-rdw&lt;/code&gt; and then edit file &lt;code&gt;/etc/default/tlp&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me is enough to set &lt;code&gt;RESTORE_DEVICE_STATE_ON_STARTUP=1&lt;/code&gt; so that if I disable bluetooth once, it is disabled &quot;forever&quot;. Same for Wifi. Which I use sometimes. And it is nice it remains in state I set before turn off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or try &lt;code&gt;DEVICES_TO_DISABLE_ON_STARTUP&lt;/code&gt; option, if it suits you better.&lt;/p&gt;&#xA;" OwnerUserId="16621" LastActivityDate="2018-12-07T18:13:01.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17422" PostTypeId="1" AcceptedAnswerId="17423" CreationDate="2018-12-07T18:54:20.530" Score="0" ViewCount="1826" Body="&lt;p&gt;&lt;strong&gt;How can i solve this ?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Repository „cdrom://elementary OS 5.0 _Juno_ - Stable amd64 (20181016) bionic Release“ does not contain the Release file.&#xA;&#xA;W: An update from this repository can not be performed securely and is therefore disabled by default.&#xA;&#xA;W: For details on creating and setting repositories, see the apt-secure (8).&#xA;&#xA;E: cdrom://elementary OS 5.0 _Juno_ - Stable amd64 (20181016) bionic Release is not (yet) available (Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16622" LastEditorUserId="14940" LastEditDate="2018-12-08T21:18:05.297" LastActivityDate="2020-03-11T09:16:56.390" Title="Repository „cdrom://elementary OS 5.0 _Juno_ - Stable amd64 (20181016) bionic Release“ does not contain the Release file" Tags="|release-juno|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17423" PostTypeId="2" ParentId="17422" CreationDate="2018-12-07T20:39:31.477" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;Edit with &lt;code&gt;sudo&lt;/code&gt;, using your favorite text editor, the file &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Using &lt;code&gt;nano&lt;/code&gt; editor&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Add a hash &lt;code&gt;#&lt;/code&gt; in front of every line that starts with &lt;code&gt;deb cdrom:&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-07T20:39:31.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17424" PostTypeId="1" CreationDate="2018-12-07T21:12:05.207" Score="0" ViewCount="267" Body="&lt;p&gt;This starts, but there is no icon in the system tray (or no system tray), so it isn't usable. There are threads about this in earlier eOS versions.&lt;/p&gt;&#xA;" OwnerUserId="7330" LastActivityDate="2018-12-07T23:23:47.293" Title="NitroShare without system tray icon" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2019-02-20T01:31:04.970" ContentLicense="CC BY-SA 4.0" />
  <row Id="17426" PostTypeId="2" ParentId="17424" CreationDate="2018-12-07T23:23:47.293" Score="1" Body="&lt;p&gt;About system tray icons. Juno dropped the support of the old ayatana&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the software devs implement the new way you can have them back by...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to edit a file (i used nano, use any editor you want - avoiding a holy war)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add Pantheon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's it, just restart X and you will have the old notification area icons&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-07T23:23:47.293" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17427" PostTypeId="1" CreationDate="2018-12-08T02:14:43.977" Score="0" ViewCount="3077" Body="&lt;p&gt;I want download Elementary OS 0.4.1 Loki iso , but can't found link download, who can give me link Elementary OS 0.4.1 Loki iso, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks all&lt;/p&gt;&#xA;" OwnerUserId="16630" LastActivityDate="2018-12-08T04:14:08.787" Title="Elementary OS 0.4.1 Loki iso download" Tags="|release-loki|download|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-08T21:11:41.400" ContentLicense="CC BY-SA 4.0" />
  <row Id="17428" PostTypeId="2" ParentId="17427" CreationDate="2018-12-08T04:14:08.787" Score="0" Body="&lt;p&gt;I did found a link but isn't oficial&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://osarchive.sda1.eu/elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://osarchive.sda1.eu/elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's more info in the referenced link below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10473/14940&quot;&gt;https://elementaryos.stackexchange.com/a/10473/14940&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-08T04:14:08.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17430" PostTypeId="2" ParentId="15616" CreationDate="2018-12-08T07:28:10.807" Score="0" Body="&lt;p&gt;As someone told you in the comments, the safest way to do this is to remove physically the network card, unplug the antenna and the bt device&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to be sure you &lt;em&gt;have&lt;/em&gt; to do that&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now if you still want a software solution for a hardware problem...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you could mask the services... throw them into /dev/null&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Stop&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo systemctl stop &amp;lt;servicename&amp;gt;.service&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Disable&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo systemctl disable &amp;lt;servicename&amp;gt;.service&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mask&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo systemctl mask &amp;lt;servicename&amp;gt;.service&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note: some of them have also &lt;code&gt;&amp;lt;servicename&amp;gt;.socket&lt;/code&gt;, do the same as above to them&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To list services&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;service --status-all&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-08T07:28:10.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17432" PostTypeId="1" CreationDate="2018-12-08T11:47:38.123" Score="0" ViewCount="123" Body="&lt;p&gt;I've done my homework and started using elementary OS on my Acer Swift 3&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;the &lt;strong&gt;wifi&lt;/strong&gt; connectivity is terrible, windows gave me constant stable connection, where elementary OS fails to do that&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Should i use &lt;em&gt;Ndiswrapper&lt;/em&gt; with default intel drivers from my acer support site or &lt;strong&gt;is there any other solution for faster and better connection&lt;/strong&gt;, current Kernel driver in use: iwlwifi&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the screen is &quot;not so smooth&quot; as before, should i try and use oibaf?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;is TLP worth it? &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;My specs:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel Core i5 8250u&lt;/li&gt;&#xA;&lt;li&gt;GPU: Intel UHD Graphics 62 | no dGPU (dedicated GPU)&lt;/li&gt;&#xA;&lt;li&gt;8gb RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://ark.intel.com/products/124967/Intel-Core-i5-8250U-Processor-6M-Cache-up-to-3-40-GHz-&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ark.intel.com/products/124967/Intel-Core-i5-8250U-Processor-6M-Cache-up-to-3-40-GHz-&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16633" LastEditorUserId="18048" LastEditDate="2019-05-07T09:05:56.267" LastActivityDate="2019-10-07T07:33:12.267" Title="new elementary OS user, wifi &amp;&amp; graphics questions" Tags="|wifi|drivers|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17433" PostTypeId="1" CreationDate="2018-12-08T16:35:15.587" Score="0" ViewCount="202" Body="&lt;p&gt;Like said in the title. Whenever I am on DataCamp watching a video or just YouTube. After I let the mouse alone, the video stops and the audio keeps going until I move my muse and the video instantly just catches up with the audio. Are there any solutions to this?&lt;/p&gt;&#xA;" OwnerUserId="16638" LastActivityDate="2018-12-11T21:23:18.243" Title="Videos stop, but audio keeps going until I move my mouse" Tags="|mouse|audio|video-playback|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17439" PostTypeId="2" ParentId="14690" CreationDate="2018-12-09T18:24:47.320" Score="0" Body="&lt;p&gt;If you have the two installs present already, you should be able to change the boot disk order in BIOS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I put Elementary OS side-by-side with Windows 10 on a Dell Inspiron without too much trouble. Elementary usually works best as the first option, I think I had some problems with Windows as primary but  they were relatively minor. I think it was the color on the Dell startup screen and it didn't really prompt me for Ubuntu or Elementary.&lt;/p&gt;&#xA;" OwnerUserId="12248" LastActivityDate="2018-12-09T18:24:47.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17440" PostTypeId="1" AcceptedAnswerId="17442" CreationDate="2018-12-09T18:39:11.437" Score="1" ViewCount="155" Body="&lt;p&gt;I use Ubuntu 18.04 and I'm thinking of switching to Elementary. The only thing that keeps holding me back is the fact that (as I understood) not every ubuntu app is compatible with Elementary. Is it true? Am I going to have any problems with installing software I use on Ubuntu(Like IntelliJ)?&lt;/p&gt;&#xA;" OwnerUserId="16647" LastEditorUserId="14940" LastEditDate="2018-12-25T23:02:58.737" LastActivityDate="2018-12-25T23:02:58.737" Title="Apps I can install on Elementary OS" Tags="|release-juno|ubuntu|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17442" PostTypeId="2" ParentId="17440" CreationDate="2018-12-09T21:14:46.747" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;Not true (Is there a posibility [one in a million] that an app made for bionic doesn't run on juno, yes maybe, but the normal is that any made for bionic will run)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;eOS &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; is based on Ubuntu 18.04, you can use any app that is designed to &lt;code&gt;bionic&lt;/code&gt;, in fact we use those repos to install &lt;a href=&quot;/questions/tagged/thirdpartyapps&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;thirdpartyapps&amp;#39;&quot; rel=&quot;tag&quot;&gt;thirdpartyapps&lt;/a&gt; where the repo owner doesn't have a specific eOS version but a Ubuntu one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Besides you can install &lt;a href=&quot;https://snapcraft.io/intellij-idea-ultimate&quot; rel=&quot;nofollow noreferrer&quot;&gt;IntelliJ&lt;/a&gt; in any distro that can use snapd and eOS can&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You only need to install &lt;code&gt;snapd&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://docs.snapcraft.io/installing-snapd/6735&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.snapcraft.io/installing-snapd/6735&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/intellij-idea-ultimate&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/intellij-idea-ultimate&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/search?category=developers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/search?category=developers&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-09T21:14:46.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17445" PostTypeId="1" AcceptedAnswerId="17471" CreationDate="2018-12-10T00:26:06.543" Score="2" ViewCount="4953" Body="&lt;p&gt;I get this message after installing any program via terminal &#xA;libdvd-pkg: &lt;code&gt;apt-get check&lt;/code&gt; failed, you may have broken packages. Aborting...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;as seen in the image:&lt;a href=&quot;https://i.stack.imgur.com/XQ3PE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XQ3PE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;note: i don't really know if this happens every time i install a program but it happened like 3 to 4 times&#xA;if anyone knows what is up with that feel free to answer.&lt;/p&gt;&#xA;" OwnerUserId="16394" LastEditorUserId="16394" LastEditDate="2018-12-10T00:32:38.310" LastActivityDate="2019-12-10T16:42:51.210" Title="libdvd-pkg: `apt-get check` failed?" Tags="|release-juno|package-management|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17446" PostTypeId="2" ParentId="17433" CreationDate="2018-12-10T03:16:26.383" Score="1" Body="&lt;p&gt;From &lt;a href=&quot;https://github.com/elementary/os/issues/121#issuecomment-432652260&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/121#issuecomment-432652260&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Assuming Intel  graphics&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Modify (or create) &lt;code&gt;/etc/X11/xorg.conf.d/20-intel.conf&lt;/code&gt; with the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier &quot;Intel Graphics&quot;&#xA;    Driver &quot;intel&quot;&#xA;    Option &quot;AccelMethod&quot; &quot;sna&quot;&#xA;    Option &quot;TearFree&quot; &quot;true&quot;&#xA;    Option &quot;DRI&quot; &quot;3&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16642" LastActivityDate="2018-12-10T03:16:26.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17448" PostTypeId="2" ParentId="17445" CreationDate="2018-12-10T04:30:29.787" Score="-3" Body="&lt;p&gt;I had the same problem.&#xA;And I discovered that the problem is in the installation of a ppa repository. Maybe you had been installing some programs with a new repository. You need to delete this one! &lt;/p&gt;&#xA;" OwnerUserId="16655" LastActivityDate="2018-12-10T04:30:29.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17449" PostTypeId="2" ParentId="16431" CreationDate="2018-12-10T05:34:47.127" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CVeNy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CVeNy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install install gnome-shell`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(Backup your &lt;code&gt;/home&lt;/code&gt; and or don't do this on a machine you really need. This might bork your install.)&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I had to use fix install &lt;code&gt;sudo apt-get install -f&lt;/code&gt;, because of the dependencies.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose gdm over lightdm when prompted using your up and down arrow keys and enter.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;On reboot chose gnome or Ubuntu gnome and setup Google in Accounts under Settings.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Applications, then gnome files and then get your google drive.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Applications, then elementary files make sure it is there too.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot, and thereafter always use Pantheon at the gdm login and files will have your drive.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It is ugly. You may get &lt;code&gt;apt-get update&lt;/code&gt; complaining that &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; has everything configured multiple times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(You can probably delete the &lt;code&gt;*.saved&lt;/code&gt; files? Comment out universe and/or multiverse lines with a &lt;code&gt;#&lt;/code&gt;?) But on the bright side you will have all of the gnome apps after adding &lt;code&gt;Gnome-&lt;/code&gt; plus your Google Drive.&lt;/p&gt;&#xA;" OwnerUserId="8830" LastEditorUserId="14940" LastEditDate="2019-01-02T23:21:38.610" LastActivityDate="2019-01-02T23:21:38.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17451" PostTypeId="1" CreationDate="2018-12-10T06:31:15.360" Score="0" ViewCount="85" Body="&lt;p&gt;So first time I try to install Eos it always fails to grub, then I wipe the disk and install it again (doing that first time went okay) but I could not chose windows from grub, that left me with changing the system with one time quick boot, so I deleted and found out that windows is installed in legacy mode and there's a way to fix it via Linux, so I went on, tried to install Eos, first time it failed to install grub (obvious) and second time after wiping the disk again it said setup was successful, yet this time it doesn't even show up grub at the beginning of boot, it goes straight into elementary os. This is getting really irritating.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Okay I reinstalled windows, wiped all other disks, installed elementary and it started working.&lt;/p&gt;&#xA;" OwnerUserId="13582" LastEditorUserId="14940" LastEditDate="2018-12-28T14:56:16.153" LastActivityDate="2020-05-23T02:26:38.837" Title="Problem installing" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17452" PostTypeId="1" AcceptedAnswerId="17453" CreationDate="2018-12-10T06:42:44.423" Score="12" ViewCount="25629" Body="&lt;p&gt;why is the system tray in elementary Juno not like the previous version, in the previous version the system tray can display VLC, RadioTray and others?&#xA;is there a way to show the system tray again?&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="26" LastEditDate="2018-12-16T06:02:00.050" LastActivityDate="2020-02-02T02:12:24.173" Title="How to display system tray icons in elementary OS Juno?" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17453" PostTypeId="2" ParentId="17452" CreationDate="2018-12-10T07:16:09.077" Score="21" Body="&lt;p&gt;About system tray icons. In &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;, elementaryOS dropped the support of the old Ayatana Indicators&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the software devs implement the new way you can have them back by...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to edit the file &lt;code&gt;/etc/xdg/autostart/indicator-application.desktop&lt;/code&gt;, find the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add &lt;code&gt;Pantheon&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or use sed for a one liner:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i -e 's/OnlyShowIn=Unity;GNOME;/OnlyShowIn=Unity;GNOME;Pantheon;/g' /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restart X:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or reboot.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="19334" LastEditDate="2019-10-31T19:25:49.597" LastActivityDate="2019-10-31T19:25:49.597" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="17454" PostTypeId="2" ParentId="16431" CreationDate="2018-12-10T08:43:11.510" Score="0" Body="&lt;p&gt;I have found OverGrive works the best and it is only about $5.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-10T08:43:11.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17455" PostTypeId="2" ParentId="14559" CreationDate="2018-12-10T08:48:54.060" Score="0" Body="&lt;p&gt;I had a problem with my touchpad not working in Manjaro, I went into BIOS and changed the touchpad from Advanced to Basic and the touchpad worked.&#xA;Don't know if this will help you.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-10T08:48:54.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17457" PostTypeId="2" ParentId="17432" CreationDate="2018-12-10T09:17:35.000" Score="2" Body="&lt;p&gt;I don't know about the other things you asked but TLP is worth it.&#xA;Just remember when you install TLP to go into terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl enable tlp&#xA;&#xA;sudo systemctl start tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="16827" LastEditDate="2019-10-07T07:33:12.267" LastActivityDate="2019-10-07T07:33:12.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17462" PostTypeId="2" ParentId="17316" CreationDate="2018-12-10T15:52:57.560" Score="1" Body="&lt;p&gt;Thanks for the answers, they were quite helpful. I'm adding another one that I just found, in case somebody else is looking for it too (e.g. future me):&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;GNOME Gitlab&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;There is a &lt;strong&gt;elementary OS&lt;/strong&gt; tag in issues of the gitlab repository of Epiphany:&#xA;&lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/issues?label_name[]=5.+elementary+OS&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.gnome.org/GNOME/epiphany/issues?label_name[]=5.+elementary+OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2018-12-10T15:52:57.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17463" PostTypeId="1" AcceptedAnswerId="17464" CreationDate="2018-12-11T00:01:24.850" Score="0" ViewCount="246" Body="&lt;p&gt;Is it normal that you have to be a root user to connect to OpenVPN client because when I am not a root user this message appears and it fails to connect:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Tue Dec 11 03:04:31 2018 ERROR: Cannot ioctl TUNSETIFF tun: Operation not permitted (errno=1) Tue Dec 11 03:04:31 2018 Exiting due to fatal error&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I am a root user it connects just fine. And is it safe to connect to a VPN client with root privileges?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this is normal or not. Pardon me for my ignorance on this subject matter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, pole.&lt;/p&gt;&#xA;" OwnerUserId="16394" LastEditorUserId="14940" LastEditDate="2018-12-11T02:06:32.847" LastActivityDate="2018-12-11T02:06:32.847" Title="OpenVPN only connects when am root" Tags="|release-juno|vpn|openvpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17464" PostTypeId="2" ParentId="17463" CreationDate="2018-12-11T01:52:24.193" Score="0" Body="&lt;p&gt;OpenVPN tries to creates TUN/TAPdevices as needed, and only the root user can do this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could use &lt;code&gt;sudo&lt;/code&gt; to run it by editing the &lt;code&gt;sudoers&lt;/code&gt; file, to allow an usergroup like &lt;code&gt;vpnusers&lt;/code&gt; to start OpenVPN without password&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can add the following line to the file &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;%vpnusers ALL = NOPASSWD: /path/to/openvpn /path/to/openvpn.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I recommend you better to follow the instructions from the OpenVPN wiki, it shows you how you could run it as an user&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;By default, OpenVPN runs as the root user. This page seeks to describe how to instead run as an unprivileged user, &quot;openvpn&quot;, instead. This is more secure than the built-in directives(--user and --group) because the openvpn process is never started with root permissions. Additionally, reconnects(including those which push fresh routes and configuration changes) which normally break after privileges are dropped via --user are handled without issue. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://community.openvpn.net/openvpn/wiki/UnprivilegedUser&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://community.openvpn.net/openvpn/wiki/UnprivilegedUser&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-11T01:52:24.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17467" PostTypeId="2" ParentId="17002" CreationDate="2018-12-11T07:53:34.650" Score="0" Body="&lt;p&gt;I put my findings here, just in case anybody run into the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HP 15&quot; Envy uses broadcom wireless driver, you can find this out by invoking the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; lspci -vnn | grep Network&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will get a response like this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;01:00.0 Network controller [0280]: Broadcom Limited BCM43142 802.11b/g/n [14e4:4365] (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Answer on for the &lt;a href=&quot;https://01:00.0%20Network%20controller%20[0280]:%20Broadcom%20Limited%20BCM43142%20802.11b/g/n%20[14e4:4365]%20(rev%2001)&quot; rel=&quot;nofollow noreferrer&quot;&gt;this askubuntu.com question&lt;/a&gt; explained the things that needs to be done quite extensively. &lt;/p&gt;&#xA;" OwnerUserId="7175" LastActivityDate="2018-12-11T07:53:34.650" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17468" PostTypeId="2" ParentId="17451" CreationDate="2018-12-11T08:41:47.700" Score="1" Body="&lt;p&gt;Okay I reinstalled windows, wiped all other disks, installed elementary and it started working.&lt;/p&gt;&#xA;" OwnerUserId="13582" LastActivityDate="2018-12-11T08:41:47.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17469" PostTypeId="2" ParentId="17397" CreationDate="2018-12-11T09:38:38.847" Score="1" Body="&lt;p&gt;You could try this, it&#xA; works for ubuntu so might work for Eos&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the login screen, press CTRL+ALT+F1 to switch to tty1. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, type the following commands one by one to fix the broken Ubuntu Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo rm /var/lib/apt/lists/lock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo rm /var/lib/dpkg/lock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo rm /var/lib/dpkg/lock-frontend&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo dpkg --configure -a&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo apt clean&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo apt update --fix-missing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo apt install -f&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo dpkg --configure -a&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo apt upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo apt dist-upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, reboot the system using command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo reboot&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-11T09:38:38.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17470" PostTypeId="2" ParentId="14350" CreationDate="2018-12-11T09:48:02.497" Score="1" Body="&lt;p&gt;I had a similar problem but not as bad as yours.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try the following commands in terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo modprobe -r peaq_wmi&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo modprobe -r eeepc_wmi&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="14940" LastEditDate="2018-12-13T02:08:52.580" LastActivityDate="2018-12-13T02:08:52.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17471" PostTypeId="2" ParentId="17445" CreationDate="2018-12-11T10:24:06.787" Score="2" Body="&lt;p&gt;TLDR: You may safely remove &lt;code&gt;libdvd-pkg&lt;/code&gt; with &lt;code&gt;sudo apt remove libdvd-pkg&lt;/code&gt; if you don't run DVDs.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This is probably a problem with the package and doesn't seem to be a problem specific to elementary OS as it &lt;a href=&quot;https://askubuntu.com/questions/1094062/libdvd-pkg-apt-get-check-failed-you-may-have-broken-packages-aborting&quot;&gt;also affects vanilla Ubuntu 18.04&lt;/a&gt;. It's removal may affect if you run DVDs.&lt;/p&gt;&#xA;" OwnerUserId="16400" LastEditorUserId="16400" LastEditDate="2018-12-11T10:33:29.267" LastActivityDate="2018-12-11T10:33:29.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17472" PostTypeId="1" CreationDate="2018-12-11T10:28:56.303" Score="0" ViewCount="69" Body="&lt;p&gt;Currently I have to use the &lt;kbd&gt;windows key&lt;/kbd&gt; plus &lt;code&gt;left/right&lt;/code&gt; click to effect my windows, I would like to use Alt for this action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change this?&lt;/p&gt;&#xA;" OwnerUserId="16641" LastActivityDate="2019-05-12T15:02:30.510" Title="Change click drag/resize button on keyboard" Tags="|keyboard-shortcuts|keyboard|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17473" PostTypeId="2" ParentId="16857" CreationDate="2018-12-11T11:05:44.867" Score="-1" Body="&lt;p&gt;As you haven't specified which terminal you would like to use, the answer was simply:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install gnome-terminal&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From here you can set the shortcuts the through the normal preferences.&lt;/p&gt;&#xA;" OwnerUserId="16641" LastEditorUserId="16641" LastEditDate="2018-12-16T23:08:53.470" LastActivityDate="2018-12-16T23:08:53.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17474" PostTypeId="2" ParentId="7742" CreationDate="2018-12-11T11:14:45.300" Score="7" Body="&lt;p&gt;For me I had my &lt;kbd&gt;shift&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt; bound to &lt;code&gt;Switch Layout&lt;/code&gt; for some reason. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HT6dH.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HT6dH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I disabled that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ck5Rw.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ck5Rw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then backwarwds shift worked again.&lt;/p&gt;&#xA;" OwnerUserId="16641" LastActivityDate="2018-12-11T11:14:45.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17475" PostTypeId="1" CreationDate="2018-12-11T11:34:45.023" Score="1" ViewCount="658" Body="&lt;p&gt;I currently have 2 plank's running, but they show all of the workspaces current windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need them to show only the current windows tasks.&lt;/p&gt;&#xA;" OwnerUserId="16641" LastActivityDate="2019-10-08T09:02:05.303" Title="Can I run multiple instances of plank that only shows the current windows windows?" Tags="|plank|window-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17476" PostTypeId="1" CreationDate="2018-12-11T12:25:29.893" Score="1" ViewCount="109" Body="&lt;p&gt;I have many small programs that display their instance inside the taskboard of gnome like &lt;code&gt;teamviewer&lt;/code&gt; or &lt;code&gt;insync&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Normally they are shown in the taskbar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now I have noway of opening these programs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Cd4US.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Cd4US.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16641" LastActivityDate="2019-05-10T18:02:15.357" Title="Display currently running applications that would normally be seeing in the taskbar" Tags="|wingpanel|programming|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-12T16:05:45.333" ContentLicense="CC BY-SA 4.0" />
  <row Id="17477" PostTypeId="1" AcceptedAnswerId="17486" CreationDate="2018-12-11T12:58:08.990" Score="0" ViewCount="280" Body="&lt;p&gt;Could you please answer me about how I can turn my VPN connection on automatically after logon? And if connection is lost what I can do to auto reconnect it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="16620" LastEditorUserId="16827" LastEditDate="2019-01-02T23:24:14.333" LastActivityDate="2019-01-02T23:24:14.333" Title="Connect and reconnect automatically to the VPN" Tags="|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17479" PostTypeId="2" ParentId="16544" CreationDate="2018-12-11T13:10:52.903" Score="1" Body="&lt;p&gt;This one worked for me &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -o normal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16507" LastActivityDate="2018-12-11T13:10:52.903" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17480" PostTypeId="1" AcceptedAnswerId="18248" CreationDate="2018-12-11T13:33:05.053" Score="2" ViewCount="168" Body="&lt;p&gt;I assume that there is a default color defined somewhere for links (which is why I'm posting in the Elementary OS stackexchange). I'm new to Elementary, and liking it. The standard mail didn't quite fit my needs, so I started using Evolution. Quite happy with it, except for two things: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When I click on a notification, I don't get sent to the message that was causing the notification. &lt;/li&gt;&#xA;&lt;li&gt;Links in e-mails are not visible, as they are white on a white background. The links in the headers (like from: and to:) are barely visible as they are white on light-gray.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Especially the latter is bugging me. Anybody here know how to change it?&lt;/p&gt;&#xA;" OwnerUserId="16507" LastActivityDate="2019-02-13T09:01:29.790" Title="How to change the colour of links in Evolution" Tags="|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17481" PostTypeId="1" CreationDate="2018-12-11T13:59:35.240" Score="0" ViewCount="337" Body="&lt;p&gt;It's my first post, so kindly correct me if there's any mistake.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've recently installed elementary os on my laptop:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;4GB RAM&lt;/li&gt;&#xA;&lt;li&gt;AMD processor&lt;/li&gt;&#xA;&lt;li&gt;R5 graphics&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After the very first boot, the device asked for installing &lt;strong&gt;wifi driver&lt;/strong&gt; so I clicked install and then the reboot to make the change, but I got stuck on the logo and it kept on flickering the whole night.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened before in Ubuntu so I immediately installed elementary os. I further force shut down the pc by pressing the power button then it successfully booted up, but the driver wasn't installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn't find any help related to this. Any help will be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance :)&lt;/p&gt;&#xA;" OwnerUserId="16664" LastEditorUserId="14940" LastEditDate="2018-12-13T10:17:02.917" LastActivityDate="2023-12-17T23:01:50.297" Title="Stuck in Bootloop after the first boot" Tags="|release-juno|drivers|ubuntu|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17482" PostTypeId="2" ParentId="17481" CreationDate="2018-12-11T16:43:20.567" Score="0" Body="&lt;p&gt;I gather from your question that your problem is the absence of the wifi drivers. If the process of installing the OS succeeded without any problems, you would not have to install the wifi drivers manually. Just try updating the os first and if it still does not work, please reply.&#xA;Sometimes the wifi does not work when you suspend/hibernate the system and then resume. Use &lt;em&gt;sudo service netwrok-manager restart&lt;/em&gt; in such case to get your connections back or restart your pc instead.&lt;/p&gt;&#xA;" OwnerUserId="16549" LastActivityDate="2018-12-11T16:43:20.567" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17483" PostTypeId="2" ParentId="17476" CreationDate="2018-12-11T16:53:20.133" Score="0" Body="&lt;p&gt;Try killall for the individual programs before trying to run them. That must do the job.&lt;/p&gt;&#xA;" OwnerUserId="16549" LastActivityDate="2018-12-11T16:53:20.133" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17485" PostTypeId="2" ParentId="16544" CreationDate="2018-12-11T21:08:22.903" Score="2" Body="&lt;p&gt;there is a rotation lock in juno available under display in the system settings. &lt;/p&gt;&#xA;" OwnerUserId="16669" LastActivityDate="2018-12-11T21:08:22.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17486" PostTypeId="2" ParentId="17477" CreationDate="2018-12-11T21:11:57.363" Score="1" Body="&lt;p&gt;You can have the VPN autoconnect by first setting up a vpn connection under the network settings. Then go to the ethernet or wifi tab and click on settings. Then under the general tab you can set it to autoconnect to the selected vpn for that connection. &lt;/p&gt;&#xA;" OwnerUserId="16669" LastActivityDate="2018-12-11T21:11:57.363" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17490" PostTypeId="1" CreationDate="2018-12-11T23:58:53.340" Score="0" ViewCount="53" Body="&lt;p&gt;The wifi selector in the upper right generally shows my list of networks, and when I want to change a network, I click the network I want, a check is placed in the circle beside the network, and the PC attempts to connect to the network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to access my wifi at work, I am unable to select the network.  I click on &quot;workwifi&quot;, but it does not receive a check mark.  I have tried forgetting the network and then reconnecting, but the network is still not selectable.  I click on it but nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas for how to make my computer select the network I want to connect to?&lt;/p&gt;&#xA;" OwnerUserId="16675" LastActivityDate="2019-01-11T23:02:05.447" Title="Can't Select Existing Wireless Network In Loki" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17493" PostTypeId="2" ParentId="17015" CreationDate="2018-12-12T04:56:50.010" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16482/update-from-loki-to-juno-stable&quot;&gt;Update from Loki to Juno stable?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did that, basically. Many repositories afterwards showed arror when updating, and I had to fix them, but I have now what can be very similar to a freshly installed Juno. Your mileage can vary.&lt;/p&gt;&#xA;" OwnerUserId="16680" LastActivityDate="2018-12-12T04:56:50.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17494" PostTypeId="2" ParentId="16343" CreationDate="2018-12-12T06:04:24.027" Score="-1" Body="&lt;p&gt;You can type in terminal &lt;code&gt;plank --preferences&lt;/code&gt; to open plank preference.&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2022-01-29T05:56:22.773" LastActivityDate="2022-01-29T05:56:22.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17495" PostTypeId="2" ParentId="17400" CreationDate="2018-12-12T07:30:14.760" Score="0" Body="&lt;p&gt;Me too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way to fix the suspend freezing is to open the &quot;Nvidia X Server Settings&quot; and set the Intel (power saving mode) option in the PRIME profiles panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope someone could help us with a better idea...&lt;/p&gt;&#xA;" OwnerUserId="16684" LastActivityDate="2018-12-12T07:30:14.760" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17496" PostTypeId="1" CreationDate="2018-12-12T10:38:30.853" Score="1" ViewCount="1476" Body="&lt;p&gt;So I've recently bought a new &lt;strong&gt;&lt;a href=&quot;http://www8.hp.com/us/en/products/laptops/product-detail.html?oid=17047134&quot; rel=&quot;nofollow noreferrer&quot;&gt;HP ProBook 440 G5&lt;/a&gt;&lt;/strong&gt; and installed elementaryOS (&lt;em&gt;version missing&lt;/em&gt;). It's a dual-boot alongside with Windows 10 (that's likely irrelevant but mentioning just in case).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, when my laptop is connected to a monitor (via HDMI/VGA) everything is fine. Both screens display everything well. Then I've noticed that when I disconnect the laptop from the monitor, the screen content flips around (upside down, sideways) when I move the lid around. I've googled this problem and found that there is a command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -o normal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which I'm supposed to add as a startup task. And this works, kinda. The screen doesn't flip anymore while I'm logged in. But as soon as I log out, the login screen goes haywire again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not really that bad, the only problem is when the password field is not in focus so I have to use my touchpad to click it, while my screen is flipped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to solve this permanently?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16687" LastEditorUserId="14940" LastEditDate="2019-01-02T23:24:11.557" LastActivityDate="2019-01-02T23:24:11.557" Title="Login screen upside down" Tags="|display|laptop|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17497" PostTypeId="2" ParentId="17496" CreationDate="2018-12-12T12:04:48.503" Score="2" Body="&lt;h2&gt;FIRST METHOD&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Create&lt;/strong&gt; a file, I'll name it &lt;code&gt;no-flip.sh&lt;/code&gt;, in &lt;code&gt;/opt&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /opt/no-flip.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Copy&lt;/strong&gt; this text and &lt;strong&gt;paste&lt;/strong&gt; it into the file and &lt;strong&gt;save&lt;/strong&gt; it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env sh&#xA;xrandr -o normal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Execute&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod a+rx /opt/no-flip.sh&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/lightdm/lightdm.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Add the lines&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;display-setup-script=/opt/no-flip.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reboot&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I used &lt;code&gt;nano&lt;/code&gt; as my text editor, you can use anyone you like&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;SECOND METHOD&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Create the file &lt;code&gt;/etc/X11/Xsession.d/45custom_xrandr-settings&lt;/code&gt; write in it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# To configure xrandr automatically during the first login,&#xA;# save this script to your computer as /etc/X11/Xsession.d/45custom_xrandr-settings:&#xA;&#xA;# Based on https://askubuntu.com/a/678301/890782&#xA;&#xA;# No Flip&#xA;xrandr -o normal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;NOTE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;This should work, at least in theory. Right now doesn't work because you ran the command in the user environment hence when you log out from that user that process is terminated. The theory is that you need to run the command system-wide, and this is one possible method.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-12T22:31:41.527" LastActivityDate="2018-12-12T22:31:41.527" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="17499" PostTypeId="1" AcceptedAnswerId="17503" CreationDate="2018-12-12T15:58:07.133" Score="0" ViewCount="1426" Body="&lt;p&gt;When I'm starting to record in kazam it's hidden. When I was on Ubuntu i had it in the tray, but now it's hidden in an unknown (for me) place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I display it in the tray?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the answers to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4226/how-can-i-get-applications-to-display-a-system-tray-icon&quot;&gt;this question&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4574/spotify-icon-tray&quot;&gt;this one&lt;/a&gt; but they didn't help.&lt;/p&gt;&#xA;" OwnerUserId="16692" LastEditorUserId="12279" LastEditDate="2018-12-12T16:13:51.337" LastActivityDate="2018-12-12T20:07:03.957" Title="How to display kazam in tray" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-16T06:01:39.457" ContentLicense="CC BY-SA 4.0" />
  <row Id="17501" PostTypeId="1" CreationDate="2018-12-12T19:11:05.467" Score="0" ViewCount="38" Body="&lt;p&gt;I am experiencing lots of problems with the current DPI implementation of Elementary OS Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the save dialog is simply broken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe it's part of Files. Could anyone suggest an usable alternative for it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AovVA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AovVA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16613" LastActivityDate="2018-12-14T12:06:16.077" Title="Low resolution and DPI causing save dialog input text to disappear" Tags="|display|desktop|files|user-interface|" AnswerCount="1" CommentCount="0" ClosedDate="2019-01-02T23:38:54.423" ContentLicense="CC BY-SA 4.0" />
  <row Id="17502" PostTypeId="2" ParentId="17009" CreationDate="2018-12-12T19:18:05.330" Score="3" Body="&lt;p&gt;Thank you to both users above for the answer. Yes, that worked to get it to boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, to fix the slowness issues, I had to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;up the RAM to 4Gb&lt;/li&gt;&#xA;&lt;li&gt;up the Video memory to 512Mb&lt;/li&gt;&#xA;&lt;li&gt;and set the EFI BIOS option to 64-bit (when building the system)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Yes, running Elementary with the 64-bit BIOS does make a difference!&lt;/p&gt;&#xA;" OwnerUserId="16292" LastEditorUserId="14940" LastEditDate="2018-12-14T06:13:47.387" LastActivityDate="2018-12-14T06:13:47.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17503" PostTypeId="2" ParentId="17499" CreationDate="2018-12-12T20:07:03.957" Score="1" Body="&lt;p&gt;About system tray icons. In &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;, elementaryOS dropped the support of the old Ayatana Indicators&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the software devs implement the new way you can have them back by...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to edit a file (i used nano, use any editor you want - avoiding a holy war)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add &lt;code&gt;Pantheon&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that's it, just restart X and you will have the old notification area icons&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17453/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17453/14940&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-12T20:07:03.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17504" PostTypeId="2" ParentId="16420" CreationDate="2018-12-12T22:13:39.953" Score="2" Body="&lt;p&gt;I have no experience of using Bluetooth/Wireless audio peripherals on elementary OS, but the following works for standard ones at least:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install an application called PulseAudio Volume Control (&lt;code&gt;pavucontrol&lt;/code&gt;) from the AppCentre to get more control over audio in elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also install it through &lt;code&gt;apt&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QDIaU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QDIaU.png&quot; alt=&quot;pavucontrol_3.0&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Among other things, it allows you to boost the volume levels of specific applications or whole audio outputs over the normal maximum of 100%. Going over 100% might lower the audio quality, though.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastEditorUserId="14940" LastEditDate="2018-12-13T09:47:10.807" LastActivityDate="2018-12-13T09:47:10.807" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17505" PostTypeId="2" ParentId="17490" CreationDate="2018-12-12T22:26:11.507" Score="1" Body="&lt;p&gt;I am not sure from your explanation if it might be the same bug as I have had. For me the problem is resolved by opening the Network Settings via the network indicator, going to the Wireless section and connecting to a network from there.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2018-12-12T22:26:11.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17506" PostTypeId="2" ParentId="16324" CreationDate="2018-12-13T06:03:19.393" Score="-2" Body="&lt;p&gt;Switch OS. It's almost impossible to make a printer work in E-OS unless you are very lucky (or that you managed to endure this Apple travestite long enough that you grew accustomed with complicated steps that leads more than not to total waste of time). As you can see I'm having fun &lt;em&gt;trying&lt;/em&gt; to install (for the X time) a printer in the same OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Welcome to Linux!&lt;/p&gt;&#xA;" OwnerUserId="16492" LastActivityDate="2018-12-13T06:03:19.393" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17509" PostTypeId="2" ParentId="15579" CreationDate="2018-12-13T09:45:28.710" Score="0" Body="&lt;p&gt;The settings you are asking for show up in the Power menu but just don't seem to do anything for me.&#xA;I use TLP for power management.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-13T09:45:28.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17510" PostTypeId="2" ParentId="2742" CreationDate="2018-12-13T09:47:44.603" Score="1" Body="&lt;p&gt;You should install TLP and Thermald&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Be careful, &lt;strong&gt;TLP is NOT compatible&lt;/strong&gt; with &lt;code&gt;acpid&lt;/code&gt; or Laptop_mode_tools.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;One more tweak:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;open a terminal and type&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;gksu gedit /etc/default/grub&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;then look for&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot; &quot;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;and add&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;intel_pstate=enable&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;finally save and close &lt;code&gt;gedit&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;after that write in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot and done.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This will enable &lt;code&gt;intel_pstate&lt;/code&gt; mode which works better than the default controller&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="14940" LastEditDate="2019-01-02T23:25:44.107" LastActivityDate="2019-01-02T23:25:44.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17511" PostTypeId="1" CreationDate="2018-12-13T10:24:09.640" Score="-1" ViewCount="72" Body="&lt;p&gt;I am clueless how to open blend files from the file manager. It doesnt show up in default applications. Can you tell me how to set blender as default program for .blend files? &#xA;Thanks!&#xA;Andreas&lt;/p&gt;&#xA;" OwnerUserId="14740" LastEditorUserId="14940" LastEditDate="2018-12-25T23:04:25.533" LastActivityDate="2019-01-10T10:55:47.417" Title="Open .blend files from Files" Tags="|pantheon-files|thirdpartyapps|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17512" PostTypeId="1" CreationDate="2018-12-13T11:14:05.400" Score="0" ViewCount="139" Body="&lt;p&gt;I read this : &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16721/empty-boot-efi-after-fresh-install-of-juno&quot;&gt;Empty /boot/efi after fresh install of Juno&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And was quiet confident, but, it doesn't work for me, cause I can't :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Enter BIOS again and select 3 EFI files from my EMMC drive (from within the &lt;strong&gt;ubuntu folder&lt;/strong&gt;) and give them &lt;em&gt;different&lt;/em&gt; descriptions:&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;shimx64.efi&lt;/li&gt;&#xA;  &lt;li&gt;grubx64.efi&lt;/li&gt;&#xA;  &lt;li&gt;fwupx64.efi&lt;/li&gt;&#xA;  &lt;li&gt;*Note: I've used name of each file without &quot;x64.efi&quot; as description.&lt;/li&gt;&#xA;  &lt;/ul&gt;&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Because there is no option in this BIOS to add anything...&#xA;And no more BIOS/Legacy mode available -- Only (U)EFI...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an expert-mode install?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An idea to install rEFInd and not Grub (who is responsible of a systematic hang ...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance !&lt;/p&gt;&#xA;" OwnerUserId="16697" LastEditorUserId="14940" LastEditDate="2018-12-13T16:33:55.013" LastActivityDate="2023-12-19T10:02:15.230" Title="Juno system-installation Acer Aspire ES1-732-P3A8" Tags="|system-installation|release-juno|uefi|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17513" PostTypeId="2" ParentId="17472" CreationDate="2018-12-13T12:38:07.637" Score="1" Body="&lt;p&gt;You can do this with &lt;code&gt;dconf editor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Inside &lt;code&gt;org &amp;gt; gnome &amp;gt; desktop &amp;gt; vm &amp;gt; preferences &amp;gt; mouse-button-modifier&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/77L8K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/77L8K.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16641" LastActivityDate="2018-12-13T12:38:07.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17514" PostTypeId="2" ParentId="17511" CreationDate="2018-12-13T13:33:07.707" Score="1" Body="&lt;p&gt;You didn't mention how you installed Blender, but I guess you downloaded the official build from the website as a tar.bz2 and extracted that somewhere. If you download from AppCenter it should work out of the box, but you will probably not get the most current version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you installed it manually, in order for Blender to show up in the desktop environment you need to provide a .desktop file. That will put it in the application launcher in the top bar and it will also let you open .blend files from the file manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The official Blender download comes with a desktop file, but you will have to edit the line that says&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=blender %f&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;to something like&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Exec=/path/to/blender %f&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;... where of course you should substitute &lt;code&gt;/path/to/blender&lt;/code&gt; with the real path.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then copy or link the file to &lt;code&gt;~/.local/share/applications/&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-12-13T13:33:07.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17515" PostTypeId="2" ParentId="12570" CreationDate="2018-12-13T16:34:31.660" Score="1" Body="&lt;p&gt;Editing server details is currently not possible in Geary accounts/edit, as &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12570/how-do-i-change-the-default-smtp-setting-in-mail-after-an-account-has-been-creat?newreg=4651a659a99943a6a3f0b92a464f37c2#comment15751_12573&quot;&gt;mentioned in the comment&lt;/a&gt; from @globetrotterdk&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says in the help menu option:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Editing existing accounts - From the Accounts dialog, select an account and click the pencil icon to change various settings. Please note that Geary cannot change server settings on an existing account. &lt;strong&gt;If you need to change your IMAP or SMTP server, you will need to delete the account and re-add it&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;These Geary Account help docs are also available online &lt;a href=&quot;http://yorba.org/geary/help/accounts.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16698" LastActivityDate="2018-12-13T16:34:31.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17516" PostTypeId="2" ParentId="16975" CreationDate="2018-12-13T19:57:17.930" Score="-1" Body="&lt;p&gt;If you want to change a icon with AppEdit, you will need to work  it with administrator rights or you can change with this command sudo &quot;a file editor like vi&quot; /usr/share/applications/org.&quot;filename&quot;.desktop&lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2018-12-13T19:57:17.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17518" PostTypeId="1" CreationDate="2018-12-13T22:50:56.227" Score="0" ViewCount="57" Body="&lt;p&gt;When I try to get updates I see an Authentication required dialog box.  I tried the password  I set-up during installation but is fails.  What is the authentication?&lt;/p&gt;&#xA;" OwnerUserId="16703" LastActivityDate="2018-12-14T06:06:36.640" Title="Update authentication" Tags="|updates|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17519" PostTypeId="1" AcceptedAnswerId="17522" CreationDate="2018-12-14T02:22:43.953" Score="2" ViewCount="169" Body="&lt;p&gt;how can I disable tap to click on the elementary os? I've tried disabling it from the &quot;Mouse &amp;amp; Touchpad&quot; menu on Settings but it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3911" LastEditDate="2018-12-14T16:37:13.177" LastActivityDate="2018-12-16T09:36:50.937" Title="How can I disable Tap to Click?" Tags="|settings|release-juno|touchpad|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17520" PostTypeId="2" ParentId="15556" CreationDate="2018-12-14T04:02:00.197" Score="2" Body="&lt;p&gt;Inside &lt;a href=&quot;/questions/tagged/app-center&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;app-center&amp;#39;&quot; rel=&quot;tag&quot;&gt;app-center&lt;/a&gt; It will be a &lt;a href=&quot;/questions/tagged/kernel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;kernel&amp;#39;&quot; rel=&quot;tag&quot;&gt;kernel&lt;/a&gt; update (&lt;code&gt;bcmwl-kernel-source&lt;/code&gt;). Simply click on &lt;strong&gt;free&lt;/strong&gt; button to start the Broadcom 802.11 Linux STA wireless driver update.&lt;br&gt;&#xA;Done, everything working fine after this.&lt;/p&gt;&#xA;" OwnerUserId="16706" LastEditorUserId="16827" LastEditDate="2019-01-25T05:45:41.250" LastActivityDate="2019-01-25T05:45:41.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17522" PostTypeId="2" ParentId="17519" CreationDate="2018-12-14T05:55:40.203" Score="2" Body="&lt;p&gt;If you have a Synaptics touchpad (which I believe is on most laptops), you can use &lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man1/synclient.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;synclient&lt;/a&gt; to modify these settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install simply run &lt;code&gt;sudo apt install xserver-xorg-input-synaptics&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case &lt;code&gt;synclient TapButton1=0&lt;/code&gt; &#xA;should do the trick.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can put this in your &lt;code&gt;~/.bashrc&lt;/code&gt; to make it permanent. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Refer to the &lt;a href=&quot;https://jlk.fjfi.cvut.cz/arch/manpages/man/synaptics.4#Tapping&quot; rel=&quot;nofollow noreferrer&quot;&gt;man page&lt;/a&gt; for more options.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastEditorUserId="16709" LastEditDate="2018-12-16T09:36:50.937" LastActivityDate="2018-12-16T09:36:50.937" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17523" PostTypeId="2" ParentId="17518" CreationDate="2018-12-14T06:06:36.640" Score="2" Body="&lt;p&gt;If you are sure you've forgotten your password (check caps lock, typos etc) you can try and reset it using recovery mode as per &lt;a href=&quot;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&quot;&gt;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&lt;/a&gt;. Should be similar for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-14T06:06:36.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17524" PostTypeId="2" ParentId="17512" CreationDate="2018-12-14T06:10:15.307" Score="0" Body="&lt;p&gt;Hmm not completely sure but you should try running &lt;a href=&quot;https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;boot-repair&lt;/a&gt; from your USB boot disk - that has solved all of my problems so far. &lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-14T06:10:15.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17525" PostTypeId="2" ParentId="17512" CreationDate="2018-12-14T09:08:31.977" Score="0" Body="&lt;p&gt;i have instalation in ACER-E5745G and its okay not problem, im just make little setting in my bios.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;make secure boot is off&lt;/li&gt;&#xA;&lt;li&gt;add new boot list (linux) to run&lt;/li&gt;&#xA;&lt;li&gt;make a new boot to top&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16710" LastActivityDate="2018-12-14T09:08:31.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17526" PostTypeId="2" ParentId="17501" CreationDate="2018-12-14T12:06:16.077" Score="0" Body="&lt;p&gt;This is likely a duplicate of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1638/buttons-are-missing-in-the-file-chooser-dialog-what-should-i-do&quot;&gt;Buttons are missing in the file chooser dialog. What should I do?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could try the following command to reset the preferences that have likely gotten messed up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings reset org.gnome.settings-daemon.plugins.xsettings overrides&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In summary, elementary overrides some GNOME settings that place the buttons in the Save/Open dialog at the top of the window where the path bar is and moves them to the bottom. If this setting accidentally gets undone, there is nowhere for the buttons to go at the top of the window so they simply aren't displayed.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2018-12-14T12:06:16.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17527" PostTypeId="1" CreationDate="2018-12-14T14:13:08.100" Score="0" ViewCount="352" Body="&lt;p&gt;So... i'm new in ElementaryOS and and I'm having some problems with freezes&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically when I write something on the keyboard after a short time without writing anything, the system freezes for 1 - 3 secs and then returns to normal, the same happens when I use the keyboard volume control key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happens when I use keyboard shortcuts too. When I use shortcuts or other keys in the terminal eg the up arrow, when the system asks me for passwords in graphical interface and I type the password, then the system freezes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, I run Elementary OS Desktop 5.0 Juno version and here is a log from &lt;em&gt;dmesg&lt;/em&gt;: &lt;a href=&quot;https://pastebin.com/eUNpYMiY&quot; rel=&quot;nofollow noreferrer&quot;&gt;pastebin&lt;/a&gt;, I hope it helps&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So... I started monitoring for &lt;code&gt;htop&lt;/code&gt; if when I pressed a key, something froze my system, and I discovered that when I reproduce the reported bug, a strange application appears consuming 90% of my CPU for a few seconds, I also discovered that when I pressed Prt Sc to take a print of the process while the system was frozen, my keyboard stopped working soon after the system thawed, I hope these keyboard anomalies stop occurring when this error is fixed, this is the application:&lt;a href=&quot;https://i.stack.imgur.com/A0aZQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/A0aZQ.png&quot; alt=&quot;The application consuming 90% of my CPU&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user16713" LastEditorDisplayName="user16713" LastEditDate="2018-12-16T09:17:12.370" LastActivityDate="2020-05-19T08:10:47.493" Title="Typing freezes the system for a short time" Tags="|keyboard|" AnswerCount="4" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17528" PostTypeId="1" CreationDate="2018-12-14T15:00:59.710" Score="0" ViewCount="526" Body="&lt;p&gt;I just bought an HP 15-da0103ng. Unfortunately WIFI is not working with elementary OS 5. I tried several approaches to install a Driver for Realtek 8821CE but so far nothing turned out to work. Can somebody help please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am more or less not familiar with Terminal operations so please post step by step guide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many Thanks in advance!!&lt;/p&gt;&#xA;" OwnerUserId="16716" LastEditorUserId="14940" LastEditDate="2018-12-25T23:03:59.473" LastActivityDate="2019-01-01T18:35:43.113" Title="HP 15-da0103ng WIFI not working" Tags="|wifi|release-juno|drivers|laptop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17530" PostTypeId="2" ParentId="17528" CreationDate="2018-12-14T22:41:39.487" Score="0" Body="&lt;p&gt;Seems to be a recent and common issue on askubuntu after a bit of googling. Have you tried &lt;a href=&quot;https://askubuntu.com/questions/1074179/the-wifi-adapter-chipset-realtek-8821ce-is-not-found-after-upgraded-to-ubuntu&quot;&gt;this answer&lt;/a&gt; yet? Unfortunately it seems it's a manual fix for now.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-14T22:41:39.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17531" PostTypeId="1" AcceptedAnswerId="17533" CreationDate="2018-12-15T04:19:48.530" Score="1" ViewCount="981" Body="&lt;p&gt;I followed this tutorial to show the tray icons again and it worked properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/16503/16719&quot;&gt;https://elementaryos.stackexchange.com/a/16503/16719&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there's a huge gap between the icons. How can I adjust it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/K5HD3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K5HD3.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2018-12-15T05:54:58.317" Title="How do I decrease the gap between icons in the status tray?" Tags="|wingpanel|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2019-01-02T23:38:43.647" ContentLicense="CC BY-SA 4.0" />
  <row Id="17533" PostTypeId="2" ParentId="17531" CreationDate="2018-12-15T05:54:58.317" Score="7" Body="&lt;p&gt;You must edit &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt;, find this selector&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.composited-indicator {&#xA;    padding: 0 6px; &#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.composited-indicator {&#xA;    padding: 0 2px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you use another theme then change the path to &lt;code&gt;/usr/share/themes/MyTheme/gtk-3.0/apps.css&lt;/code&gt;&#xA;You'll have to repeat it after every elementary theme update unless devs decide to change it.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2018-12-15T05:54:58.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17534" PostTypeId="1" CreationDate="2018-12-15T10:23:47.333" Score="0" ViewCount="109" Body="&lt;p&gt;In order to keep this post short, allow me to point you to a rather old Scribus bug report, which perfectly describes the problem. This specific bug has been fixed upstream, and is not present in Ubuntu 18.04.1, or Xubuntu 18.04.1, or Linux Mint 19. BUT, it is present in elementaryOS 5.0 which is very strange. It would be nice if someone provided some solution since it cripples an otherwise perfectly working package:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/scribus/+bug/177805&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/scribus/+bug/177805&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind Regards&lt;/p&gt;&#xA;" OwnerUserId="16720" LastActivityDate="2018-12-15T20:58:47.293" Title="Scribus Not Working Properly (elementary OS 5.0)" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17535" PostTypeId="2" ParentId="17414" CreationDate="2018-12-15T11:28:42.983" Score="0" Body="&lt;p&gt;DD makes bad stick. You can use special apps better. I made flash drive with rufus on win7 (my second system in dualboot). It was easier and better way for me. You can boot liveCD and write flash drive with unetbootin or etcher&lt;/p&gt;&#xA;" OwnerUserId="16649" LastActivityDate="2018-12-15T11:28:42.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17536" PostTypeId="2" ParentId="17414" CreationDate="2018-12-15T12:09:07.023" Score="1" Body="&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You used:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dd if=&amp;lt;/path/to/eOS.iso&amp;gt; of=&amp;lt;/path/to/device&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please use in the future:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dd bs=4M if=&amp;lt;/path/to/eOS.iso of=&amp;lt;/path/to/device&amp;gt; status=progress oflag=sync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dd bs=4M if=&amp;lt;/path/to/eOS.iso of=&amp;lt;/path/to/device&amp;gt; status=progress &amp;amp;&amp;amp; sync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;About the Question&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Looks like your hard drive just died or if you are lucky is just an error that can be repaired...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I'll use &lt;code&gt;/dev/sda&lt;/code&gt; but your disk can be different, check with &lt;code&gt;sudo fdisk -l&lt;/code&gt; if you don't know&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Check with:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo fdisk -l /dev/sda&lt;/code&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Probably here you'll get the error: &lt;code&gt;fdisk: cannot open /dev/sda: Input/output error&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo smartctl -i /dev/sda&lt;/code&gt; &lt;em&gt;(optional, to get more info)&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;em&gt;If you don't have the &lt;code&gt;smartctl&lt;/code&gt; command and you want to install it, use &lt;code&gt;sudo apt-get install smartmontools&lt;/code&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Try to repair the disk with:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo fsck /dev/sda&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you need to repair a partition of /dev/sda use (X is the partition number):&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo fsck /dev/sdaX&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-15T12:09:07.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17537" PostTypeId="2" ParentId="17534" CreationDate="2018-12-15T12:27:11.017" Score="1" Body="&lt;p&gt;FYI, the Scribus that comes with &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; comes from Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt policy scribus&#xA;scribus:&#xA;  Instalados: (ninguno)&#xA;  Candidato:  1.4.6+dfsg-4build1&#xA;  Tabla de versión:&#xA;     1.4.6+dfsg-4build1 500&#xA;        500 http://cl.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;About the Question&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Remove Scribus&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge scribus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install flatpak&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add flathub repo to flatpak&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install Scribus (a newer version - current &lt;strong&gt;&lt;code&gt;Scribus 1.5.4&lt;/code&gt;&lt;/strong&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak install flathub net.scribus.Scribus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;What is &lt;code&gt;flatpak&lt;/code&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flatpak.org/faq/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/faq/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;ref:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/apps/details/net.scribus.Scribus&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/net.scribus.Scribus&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flatpak.org/setup/Ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/setup/Ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-15T12:27:11.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17538" PostTypeId="2" ParentId="17534" CreationDate="2018-12-15T14:24:26.227" Score="1" Body="&lt;p&gt;You can just add Scribus PPA with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:scribus/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and after&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, you'll have 1.4.7 version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you like you can install &lt;code&gt;scibus-ng&lt;/code&gt; (version 1.5.4) from the same PPA.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt  install scibus-ng&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Note&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If you get an error like &quot;&lt;code&gt;command not found&lt;/code&gt;&quot; after using &lt;code&gt;add-apt-repository&lt;/code&gt;. Just install &lt;code&gt;software-properties-common&lt;/code&gt; and run again the previous command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt  install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="14940" LastEditDate="2018-12-15T20:58:47.293" LastActivityDate="2018-12-15T20:58:47.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17542" PostTypeId="2" ParentId="17527" CreationDate="2018-12-15T22:04:46.313" Score="1" Body="&lt;h2&gt;About the QUESTION&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Have you tried using another keyboard? And/Or another USB port? Linux is very reactive in terms of a faulty hardware, could be &quot;working&quot; but having &lt;a href=&quot;https://en.wikipedia.org/wiki/Electromagnetic_interference&quot; rel=&quot;nofollow noreferrer&quot;&gt;EMI&lt;/a&gt;. This is just a theory, but easier to test another hardware first than to keep trying to find the needle on the haystack&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(Could be useful if you provide Xorg's log [&lt;code&gt;/var/log/Xorg.0.log&lt;/code&gt;] and the syslog [&lt;code&gt;/var/log/syslog.log&lt;/code&gt;]. Remember to replicate the problem just before that way the problem will get into the log)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;ANNEX&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(This didn't work for &lt;a href=&quot;https://elementaryos.stackexchange.com/users/16713/mrpiva&quot;&gt;MrPiva&lt;/a&gt;, but I'll leave it as future reference.)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix/help with what's on &lt;code&gt;dmesg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[   20.081766] random: crng init done&#xA;[   20.081776] random: 7 urandom warning(s) missed due to ratelimiting&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It seems to be a bug fixed in &lt;code&gt;plymouth/0.9.3-3&lt;/code&gt; but Ubuntu and we have &lt;code&gt;plymouth/0.9.3-1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=897572#82&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=897572#82&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/a/442744&quot;&gt;https://unix.stackexchange.com/a/442744&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/ubuntu/+source/plymouth&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/ubuntu/+source/plymouth&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://packages.debian.org/search?keywords=plymouth&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.debian.org/search?keywords=plymouth&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;1. RNG-TOOLS&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You could try installing &lt;code&gt;rng-tools&lt;/code&gt; to help with the issue&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Rng-tools. The rng-tools is a set of utilities related to random number generation in kernel. The main program is rngd, a daemon developed to check and feed random data from hardware device to kernel entropy pool. This is mainly useful to increase the quantity of entropy in kernel to make /dev/random faster.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Install &lt;code&gt;rng-tools&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install rng-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you installed &lt;code&gt;haveged&lt;/code&gt;, remove it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge haveged&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;2. HAVEGE&lt;/h2&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Linux entropy source using the HAVEGE algorithm&#xA;   haveged is a userspace entropy daemon which is not dependent upon the&#xA;   standard mechanisms for harvesting randomness for the system entropy&#xA;   pool. This is important in systems with high entropy needs or limited&#xA;   user interaction (e.g. headless servers).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;haveged uses HAVEGE (HArdware Volatile Entropy Gathering and Expansion)&#xA;   to maintain a 1M pool of random bytes used to fill /dev/random&#xA;   whenever the supply of random bits in dev/random falls below the low&#xA;   water mark of the device.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;More information about HAVEGE is available at&#xA;   &lt;a href=&quot;http://www.irisa.fr/caps/projects/hipsor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.irisa.fr/caps/projects/hipsor/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install haveged&#xA;&#xA;sudo systemctl enable haveged&#xA;&#xA;sudo systemctl start haveged&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://unix.stackexchange.com/a/461466&quot;&gt;https://unix.stackexchange.com/a/461466&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-17T16:45:45.203" LastActivityDate="2018-12-17T16:45:45.203" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="17544" PostTypeId="1" CreationDate="2018-12-16T01:39:02.333" Score="3" ViewCount="3187" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V86Lh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V86Lh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see above, the close button is on the right Windows-style. But I want to make it fit with the elementary look. I think this requires messing around with Firefox's &lt;code&gt;userChrome.css&lt;/code&gt; but I have no idea what to do from that point.&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2019-11-15T07:01:11.520" Title="How do I move the X (close) button on Firefox to the left?" Tags="|firefox|user-interface|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17545" PostTypeId="1" CreationDate="2018-12-16T03:41:01.700" Score="0" ViewCount="195" Body="&lt;p&gt;Just installed elementary OS for the first time and I do not see any option for Bluetooth.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried some commands but no success:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# rfkill list&#xA;0: phy0: Wireless LAN&#xA;   Soft blocked: no&#xA;   Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can not even see Bluetooth under &lt;code&gt;rfkill&lt;/code&gt; and no Bluetooth icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a beginner with Linux. Any help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="16730" LastEditorUserId="14940" LastEditDate="2018-12-29T04:46:59.017" LastActivityDate="2024-01-02T20:06:35.827" Title="Bluetooth issue - no icon on the top bar" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17546" PostTypeId="2" ParentId="16428" CreationDate="2018-12-16T04:11:19.827" Score="1" Body="&lt;p&gt;This one was difficult for me to solve on my own project. But here's what I've found. GETTEXT_PACKAGE &lt;strong&gt;really&lt;/strong&gt; hates &lt;code&gt;\&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To resolve this issue I had to go through each of my PO files and remove the \n in each string.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So.&#xA;&lt;code&gt;&quot;Project-Id-Version: org.pantheon.dexter-contacts\n&quot;&lt;/code&gt;&#xA;Became&#xA;&lt;code&gt;&quot;Project-Id-Version: org.pantheon.dexter-contacts&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In addition to this I had to fix my meson.build&#xA;&lt;code&gt;add_global_arguments('-DGETTEXT_PACKAGE=\&quot;@0@&quot;\'.format (meson.project_name()), language:'c')&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;became &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;add_global_arguments('-DGETTEXT_PACKAGE=&quot;@0@&quot;'.format (meson.project_name()), language:'c')&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed in your PO files you still have \n. I'd recommend removing those!&lt;/p&gt;&#xA;" OwnerUserId="438" LastActivityDate="2018-12-16T04:11:19.827" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17547" PostTypeId="2" ParentId="17544" CreationDate="2018-12-16T10:07:32.543" Score="0" Body="&lt;p&gt;My brand new elementaryOS install has the close button on the left hand side. It looks like you have client side decorations enabled which saves vertical real estate by putting UI elements in the title bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To disable this, visit &lt;code&gt;about:config&lt;/code&gt; in Firefox and set the preference &lt;code&gt;browser.tabs.drawInTitlebar&lt;/code&gt; to &lt;code&gt;false&lt;/code&gt; and restart Firefox.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-16T10:07:32.543" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17548" PostTypeId="2" ParentId="17545" CreationDate="2018-12-16T10:11:52.400" Score="0" Body="&lt;p&gt;What Wi-Fi/Bluetooth chipset do you have? From there you can check if the right drivers are installed and loaded using &lt;code&gt;lsmod&lt;/code&gt;. Also can you open an application called Bluetooth - it comes with the default installation.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-16T10:11:52.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17549" PostTypeId="2" ParentId="17544" CreationDate="2018-12-16T11:57:11.603" Score="0" Body="&lt;p&gt;You can use the elementary tweaks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open a terminal, then write and execute (by pressing ENTER) this commands, one at a time:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt install software-properties-common&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;will ask your password&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;will ask you press ENTER to confirm the installation of the PPA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(newer version of add-apt-repository runs apt update after automatically. In case it didn't, just run sudo apt update yourself)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt install elementary-tweaks&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="16708" LastActivityDate="2018-12-16T11:57:11.603" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17551" PostTypeId="1" CreationDate="2018-12-16T16:45:39.623" Score="1" ViewCount="103" Body="&lt;p&gt;I've just come across &lt;a href=&quot;https://www.datamation.com/open-source/ubuntu-pros-and-cons-1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this old article&lt;/a&gt; where it states:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;In the 12.10 release, Canonical entered into an affiliate agreement&#xA;  with Amazon. Under the agreement, search results from Amazon appear&#xA;  when users search their local hard drive. In the upcoming 13.04&#xA;  release, this feature is going to be greatly expanded, with results&#xA;  from dozens of other companies appearing unless users turn the feature&#xA;  off.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It goes on to say:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;many distributions have compromised their anti-proprietary positions&#xA;  in order to get working hardware drivers and audio codecs.&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I believe this is true for &lt;a href=&quot;https://www.ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu&lt;/a&gt;. This brings me to several questions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is Amazon still an affiliate of Canonical?&lt;/li&gt;&#xA;&lt;li&gt;Is Elementary OS affiliated with any 3rd-parties that privacy-conscious users may want to opt-out of?&lt;/li&gt;&#xA;&lt;li&gt;Are their any proprietary components used in Elementary OS by default?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16736" LastEditorUserId="14940" LastEditDate="2019-01-02T23:26:15.660" LastActivityDate="2019-01-02T23:26:15.660" Title="Elementary OS privacy questions" Tags="|release-juno|elementary-project|proprietary|privacy|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17552" PostTypeId="1" AcceptedAnswerId="17557" CreationDate="2018-12-16T17:17:22.787" Score="1" ViewCount="71" Body="&lt;p&gt;When looking at the list of wifi networks in the menu bar's wifi icon it seems to show (as indicated by the check mark) that I am connected to a network that I am not actually connected to. The system settings' network page shows the correct network though. Also the list of available networks is much longer when accessed through the menu bar vs. the system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are these known bugs / expected behaviors?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l3aBT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l3aBT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16737" LastActivityDate="2018-12-16T21:52:20.933" Title="Selected Wifi in menu bar differs from System Settings&gt;Network page" Tags="|wifi|release-juno|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17555" PostTypeId="2" ParentId="17544" CreationDate="2018-12-16T18:35:45.313" Score="1" Body="&lt;p&gt;This was answered before where it belongs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.mozilla.org/en-US/questions/1157451&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.mozilla.org/en-US/questions/1157451&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.mozilla.org/en-US/questions/1222872&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.mozilla.org/en-US/questions/1222872&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;--&gt;&gt;&lt;/strong&gt; &lt;a href=&quot;https://support.mozilla.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.mozilla.org&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Also:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look you can use someone's work, as a start point, for an old version of Firefox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/kurogetsusai/firefox-gnome-theme/issues/46&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/kurogetsusai/firefox-gnome-theme/issues/46&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-16T19:13:32.577" LastActivityDate="2018-12-16T19:13:32.577" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17556" PostTypeId="1" AcceptedAnswerId="17560" CreationDate="2018-12-16T21:24:44.633" Score="0" ViewCount="1450" Body="&lt;p&gt;I have an SSD with Windows 10 on it, a HDD to go along with it with just data, and now an SSD with elementary OS on it.&#xA;During the installation i had some problems, so unplugged the SSD of Windows 10, and HDD's SATA cables, and the installation ended up correct.&#xA;Now if I start the PC I don't get the GRUB screen, but the elementary OS login screen instead. I tried to edit the grub config, and update it manually, but that did not help. How could i manage the dual boot?&lt;/p&gt;&#xA;" OwnerUserId="16741" LastEditorUserId="16827" LastEditDate="2019-01-01T22:13:49.637" LastActivityDate="2019-01-01T22:13:49.637" Title="How to set up GRUB - Dual Boot of Windows 10 &amp; elementary OS" Tags="|dual-boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17557" PostTypeId="2" ParentId="17552" CreationDate="2018-12-16T21:52:20.933" Score="1" Body="&lt;p&gt;If you notice this happening repeatedly consider filing an issue at the relevant GitHub repo so that someone can investigate: &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-network&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After checking, there is already one confirmed issue filed as high priority here: &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network/issues/111&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-network/issues/111&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-16T21:52:20.933" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17558" PostTypeId="2" ParentId="17556" CreationDate="2018-12-16T21:55:52.457" Score="0" Body="&lt;p&gt;Try running &lt;code&gt;boot-repair&lt;/code&gt; from the USB installation media, this has worked for various problems for me in the past:&#xA;&lt;a href=&quot;https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~yannubuntu/+archive/ubuntu/boot-repair&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt update&#xA;sudo apt install boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This &lt;em&gt;should&lt;/em&gt; automatically detect your Windows 10 partitions.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-16T21:55:52.457" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17559" PostTypeId="1" CreationDate="2018-12-16T22:13:57.187" Score="0" ViewCount="465" Body="&lt;p&gt;I &lt;a href=&quot;https://www.phoronix.com/scan.php?page=news_item&amp;amp;px=Linux-Apple-Magic-Trackpad-2&quot; rel=&quot;nofollow noreferrer&quot;&gt;have read&lt;/a&gt; that Google engineers worked in an Apple Magic Trackpad 2 driver for Linux, back in September. Is this driver available in Juno? Can you use it with multitouch gestures support?&lt;/p&gt;&#xA;" OwnerUserId="16742" LastEditorUserId="16742" LastEditDate="2018-12-17T10:11:28.613" LastActivityDate="2023-12-22T11:02:45.310" Title="Is the Apple Magic Trackpad 2 supported in Juno? With multitouch gestures?" Tags="|touchpad|gesture|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17560" PostTypeId="2" ParentId="17556" CreationDate="2018-12-16T22:22:26.430" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I tried to edit the grub config&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;We don't know what you did configuring grub so maybe you did the following&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;By default Grub comes hidden&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to change that just edit &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change where it says&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_TIMEOUT_STYLE=hidden&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;,to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_TIMEOUT_STYLE=menu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now update grub&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot to test&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can adjust the timeout in seconds there too.... check the manual&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.gnu.org/software/grub/manual/grub/html_node/Simple-configuration.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.gnu.org/software/grub/manual/grub/html_node/Simple-configuration.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Also there's a way to access the Grub menu without editing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just after the Bios/UEFI post, press &lt;kbd&gt;SHIFT&lt;/kbd&gt; repeatedly. If you fail the timing, reboot and try again.&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-16T22:22:26.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17561" PostTypeId="1" AcceptedAnswerId="17565" CreationDate="2018-12-17T01:08:41.327" Score="2" ViewCount="410" Body="&lt;p&gt;So i just recently purchased an HP 840 G2 and decided to make the switch to Elementary OS along with the purchase.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running into an issue with the screen constantly rotating when the laptop is moved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also always rotates the screen if the computer times out and locks regardless if the laptop has been moved or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked into some possible fixes and kind of solved my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set org.gnome.settings-daemon.plugins.orientation active false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;didn't net me any results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo systemctl stop iio-sensor-proxy.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;stops the screen rotation for the duration of the session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the laptop times out or is shutdown/restarted, the issue returns.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some more looking and i think i may have to run the latter as a startup script in order to have the issue fully resolved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, any ideas on how to go about this?  found 1 tutorial but i don't have the best knowledge when it comes to coding and scripting. Beginner at best. Or is there a simpler answer out there?&lt;/p&gt;&#xA;" OwnerUserId="16744" LastEditorUserId="14940" LastEditDate="2018-12-18T04:01:59.553" LastActivityDate="2018-12-25T23:27:40.757" Title="screen flip issue with Juno 5.0 on HP 840 G1" Tags="|display|release-juno|laptop|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17562" PostTypeId="2" ParentId="17561" CreationDate="2018-12-17T01:18:59.643" Score="0" Body="&lt;p&gt;Easiest way without messing around with init.d/services etc perhaps simply put the script in &lt;code&gt;/etc/rc.local&lt;/code&gt;. Not sure if elementaryOS has this setup by default, if it doesn't exist follow these steps &lt;a href=&quot;https://askubuntu.com/a/401090&quot;&gt;https://askubuntu.com/a/401090&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(edit: the answer by Sebastian is much better, I completely overlooked that it was just disabling a service.)&lt;/p&gt;&#xA;" OwnerUserId="16709" LastEditorUserId="16709" LastEditDate="2018-12-17T09:46:02.253" LastActivityDate="2018-12-17T09:46:02.253" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17564" PostTypeId="1" AcceptedAnswerId="17571" CreationDate="2018-12-17T08:26:11.987" Score="1" ViewCount="135" Body="&lt;p&gt;When I plug or unplug my JBL headphones with mic, the sound is being adjusted (for example, if I previously had the volume turned off when I unplug my headphones the volume becomes muted, and vice versa).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, I'm not able to make the elementary OS Juno to automatically select Dock Microphone by default when I plug them in thus I have to manually switch it every time. Do you have any ideas of how this could be set up so that when the headphones with the mic are plugged in, the system automatically uses the headphone's mic instead of a built-in one?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tsgVr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tsgVr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="10234" LastActivityDate="2019-01-16T21:00:26.353" Title="Q: How to enable dock microphone by default when headphones with mic are plugged-in?" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17565" PostTypeId="2" ParentId="17561" CreationDate="2018-12-17T08:33:16.703" Score="3" Body="&lt;p&gt;If this &lt;code&gt;sudo systemctl stop iio-sensor-proxy.service&lt;/code&gt; works temporarily for you, then disable it so next time you reboot, it will not load&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To disable it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl disable iio-sensor-proxy.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If disable don't work (sometimes services are called externally or by other enabled and needed services), just mask it into null and will not run no matter what&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl mask iio-sensor-proxy.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-17T08:33:16.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17567" PostTypeId="1" CreationDate="2018-12-17T11:21:04.473" Score="0" ViewCount="434" Body="&lt;p&gt;I have some problems that happen with an old system based on FX-8350/AMD790 and also with a new one based on Ryzen5 2600/AMD350.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I can install the system and run it without problems only with my main GPU, an AMD RADEON R9 380X. But when I changed it to an AMD PRO WX2100, the system can't boot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When I put installation ISO/UEFI system cant start installation.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When I try to run advance/repair system go into infinite loop.   &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;My 5c:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem is, IMHO, in the source of Linux/elementary because I have the same problems with steamOS and it's in the initiation hardware so definitely no drivers issue.&lt;/p&gt;&#xA;" OwnerUserId="16749" LastEditorUserId="16827" LastEditDate="2019-05-07T09:02:45.940" LastActivityDate="2019-10-04T13:01:45.353" Title="Cant Install/Boot elementary OS with GPU + AMD PRO WX2100" Tags="|boot|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17568" PostTypeId="2" ParentId="17559" CreationDate="2018-12-17T16:09:39.230" Score="0" Body="&lt;p&gt;As far as I know Magic Trackpad 2 support will only &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=9d7b18668956c411a422d04c712994c5fdb23a4b&quot; rel=&quot;nofollow noreferrer&quot;&gt;land&lt;/a&gt; in Kernel 4.20, to be released in a few days. This kernel could come to elementary via the &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Hardware Enablement Stack&lt;/a&gt; in February 2019, but I am not aware of any definitive announcement which kernel version that will contain.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-12-17T16:09:39.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17569" PostTypeId="2" ParentId="15778" CreationDate="2018-12-17T16:57:43.643" Score="0" Body="&lt;p&gt;I was able to get this semi fixed on my HP 840 G2.  I downloaded dconf editor and changed the setting there.  It isn't a full fix.  While it defaults it on a reboot to off, if the laptop locks and I unlock, its back on.  I have got into the custom of shutting down after use so this pretty much solves it for me.  Hoping to get some time to look into the issue with the locking/unlocking later in the week.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;haven't looked into whether or not this kills power but it does allow control via the desktop indicator. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed dconf editor through terminal, the &quot;how to&quot; I followed mentioned that it can be done through the app store as well but i didn't verify this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install dconf-editor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is the link to the answer this was derived from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementaryos.stackexchange.com/questions/14587/…&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last, the path listed in the how to didn't follow the same for me.  I had to go:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;io/elementary/desktop/wingpanel/bluetooth&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once there I was able to set the default setting to off.  as stated before it works with reboots, but not for timeout/lock.&lt;/p&gt;&#xA;" OwnerUserId="16744" LastEditorUserId="16744" LastEditDate="2018-12-18T15:13:16.550" LastActivityDate="2018-12-18T15:13:16.550" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17571" PostTypeId="2" ParentId="17564" CreationDate="2018-12-17T20:36:31.447" Score="0" Body="&lt;p&gt;Can't check if eOS has &lt;code&gt;pulseaudio&lt;/code&gt; installed by default right now, if it's not there then &lt;code&gt;apt install&lt;/code&gt; first. Then follow &lt;a href=&quot;https://askubuntu.com/questions/113704/make-pulseaudio-prefer-external-audio-device&quot;&gt;this answer&lt;/a&gt; to automatically switch to a newly connected device.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-17T20:36:31.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17572" PostTypeId="1" CreationDate="2018-12-17T22:10:04.477" Score="0" ViewCount="604" Body="&lt;p&gt;I just made the switch from Windows, I previously had elementary OS running on an old MacBook with no problem but this computer died.&#xA;I now have a Razer Blade Stealth 12.5&quot; 4k from late 2016. I performed a fresh install of elementary OS 5.0 and was able to go through the whole install and login screen no problem.&#xA;I also selected the option to format the whole disk.&#xA;Right after I login I get this screen and cannot do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ejbYP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ejbYP.jpg&quot; alt=&quot;Razer Blade Stealth screen issue&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During the installation process I also selected to install updates during the install as well as drivers.&#xA;If someone has an idea please let me know I really want to run elementary OS as my main OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much!&lt;/p&gt;&#xA;" OwnerUserId="16756" LastEditorUserId="18048" LastEditDate="2019-05-07T09:02:58.933" LastActivityDate="2019-10-04T17:02:45.427" Title="Screen Error Razer Blade Stealth" Tags="|display|hardware|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17573" PostTypeId="1" AcceptedAnswerId="17574" CreationDate="2018-12-17T23:57:39.997" Score="0" ViewCount="92" Body="&lt;p&gt;Sorry for the vague title, couldn't think of anything better. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've bought a laptop about a month ago with Windows 10 pre-installed on it. Then I had decided to install elementaryOS alongside it. Since I didn't want to do it all on my own I followed the instructions here: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/guide-install-elementary-os-luna/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Within these instructions is a part where you're supposed to create three partitions: root, home and swap. Now, keep in mind that I've done this over a month ago and only now noticed the problem. The biggest partition of them is the home partition (as mentioned in the article) so out of the total of 100GB I gave around 70GB to the home partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I was wondering how much disk space I have left on my linux partition and when I entered &lt;code&gt;gparted&lt;/code&gt; this is what I saw:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3o19B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3o19B.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I check with &lt;code&gt;df -h&lt;/code&gt; I get this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pkZSa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pkZSa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, about the gparted: The 931GB drive that it shows is an HDD that I use as a secondary (data) storage - has nothing to do with either elementary or Windows 10. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;df&lt;/code&gt;, on the other hand does show the 69GB partition. So then I thought maybe nothing was wrong. But when I go to Files and hover over 'File System' (I couldn't take a screenshot of that, it disappears when I hit prntscr) it says '9.6GB/19.5 available'. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So where did the other 70GB go?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally, in Windows 10 I can see a 77GB partition, for which at this point I am not sure whether it's the one I'm looking for or what:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/CqiRV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CqiRV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I said, I did the installation a while ago and, even though I'm pretty sure I had followed the instructions correctly, who knows. Maybe I missed something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, is there a way to fix this problem (give the 70GB partition to elementaryOS) or will I just have to reinstall? If reinstallation is the only solution, what is the best way to do it without screwing up the Windows partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="16687" LastActivityDate="2018-12-18T01:29:18.890" Title="Less disk space than provided by dual boot" Tags="|dual-boot|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17574" PostTypeId="2" ParentId="17573" CreationDate="2018-12-18T01:29:18.890" Score="1" Body="&lt;p&gt;Press there and change it to &lt;code&gt;/dev/sdb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9dUPM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9dUPM.png&quot; alt=&quot;gparted&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;About the other statement you hovering in &lt;a href=&quot;/questions/tagged/pantheon-files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;pantheon-files&amp;#39;&quot; rel=&quot;tag&quot;&gt;pantheon-files&lt;/a&gt; and seeing less space. You have mixed concepts, remember that in Linux you have mount points acting logically as one but they are separated. What you saw as &quot;File System&quot; is the same amount you see in the root mount point (&lt;code&gt;/&lt;/code&gt;). You expected to see it all together but doesn't work that way&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-18T01:29:18.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17575" PostTypeId="1" CreationDate="2018-12-18T05:27:23.383" Score="1" ViewCount="144" Body="&lt;p&gt;I just installed elementary os to an old iMac 24inch from 2007( core 2 duo 2.4 ghz, 4gb ram, ATI Radeon 2600 PRO ).&#xA;It is a beautiful OS, everything working nicely so far.&#xA;But I noticed an issue when waking up from the suspension.&#xA;After waking up, the screen becomes faded. Please see the attached screenshot.&#xA;It looks like it is using only small number of colors instead of full colors available.&#xA;Please help me fixing this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2PPoN.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2PPoN.jpg&quot; alt=&quot;faded screen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16761" LastEditorUserId="16827" LastEditDate="2019-04-13T05:50:04.483" LastActivityDate="2019-04-13T05:50:04.483" Title="Faded screen after waking from suspension" Tags="|display|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17576" PostTypeId="2" ParentId="17575" CreationDate="2018-12-18T06:22:57.263" Score="-1" Body="&lt;p&gt;Sorry, not an answer, but I can confirm this issue. I also have a 2007 24 inch iMac &amp;amp; see the same issue.&#xA;Perhaps relevant, I also used to face this problem sometimes when the imac ran UbuntuMate.&lt;/p&gt;&#xA;" OwnerUserId="16762" LastEditorUserId="16762" LastEditDate="2018-12-18T06:49:14.690" LastActivityDate="2018-12-18T06:49:14.690" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17577" PostTypeId="2" ParentId="17572" CreationDate="2018-12-18T08:53:47.990" Score="1" Body="&lt;p&gt;Restart your laptop and press e when grub appears. Then add &lt;code&gt;intel_idle.max_cstate=4&lt;/code&gt; between &lt;code&gt;quiet splash&lt;/code&gt; and press F10 to continue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that worked you need to make it permanent. Open a terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo io.elementary.code  /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll see a line similar to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then edit the line and leave it like this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash button.lid_init_state=open intel_idle.max_cstate=4&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you can close that window. Then execute &lt;code&gt;sudo update-grub&lt;/code&gt; and reboot to see if it works.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/rolandguelle/razer-blade-stealth-linux/blob/master/elementary-os.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2018-12-18T18:54:09.830" LastActivityDate="2018-12-18T18:54:09.830" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="17578" PostTypeId="2" ParentId="17551" CreationDate="2018-12-18T09:59:24.033" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;As far as I know there is still an &quot;Amazon App&quot; pre-installed by default on current Ubuntu versions. However it is really just a link to the website and can be easily uninstalled. What you're referring to in your first quote is the Shopping Lens. It could also be easily uninstalled and in later versions of Ubuntu there was a setting to disable it, IIRC. However with 17.10 Canonical killed Unity and with it its lenses. Current Ubuntu uses Gnome Shell and there is no respective piece of software that does something similar. In Gnome Shell there is a similar concept called Search Providers, but there is no &quot;Shopping Search Provider&quot;. It seems Canonical learned the lesson from the uproar that followed the introduction of the shopping lens.&lt;/li&gt;&#xA;&lt;li&gt;elementary OS seems to be very concerned about the privacy of their users and doesn't come with anything like that pre-installed. elementary OS has an indexing service, but the collected data is only used for things like search and does not leave your computer / account. This can be disabled alltogether or on a filetype basis. See screenshot below.&lt;/li&gt;&#xA;&lt;li&gt;elementary OS may come with some proprietary firmware files that are needed for some peripheral devices (like printers) to work at all. This is done by most Linux distributions nowadays. Other than that the OS itself should not contain any non-free software.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qcP9F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qcP9F.png&quot; alt=&quot;Privacy Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2018-12-18T09:59:24.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17579" PostTypeId="2" ParentId="14769" CreationDate="2018-12-18T11:45:19.977" Score="0" Body="&lt;p&gt;It seems there's no way of manually selecting the profile from the gui (the first one is always selected), or to rearrange the profiles or set a default one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One can select priorities for automatic activation, but it seems to be ignored.&lt;/p&gt;&#xA;" OwnerUserId="16765" LastEditorUserId="16765" LastEditDate="2018-12-18T11:52:12.950" LastActivityDate="2018-12-18T11:52:12.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17580" PostTypeId="1" CreationDate="2018-12-18T14:35:35.597" Score="3" ViewCount="1774" Body="&lt;p&gt;I get the normal elementary OS greeter, I login (it doesn't give a password error) but then I'm returned to the greeter again.&lt;br&gt;&#xA;This also happened to me earlier this month, then I ended up reinstalling.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know there are a lot of existing similar questions, but I've gone through them (listed below) and the solutions don't seem to help. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/12758&quot;&gt;can&amp;#39;t log back in to Elementary OS 0.4.1 Loki 64bit&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/2568&quot;&gt;I can&amp;#39;t login , return to login screen (it isn&amp;#39;t Xauthority)&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/2443&quot;&gt;Can&amp;#39;t login after upgrade&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/7279&quot;&gt;I get logged out as soon as I log in&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/2630&quot;&gt;Cant login to my main account after System Update&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/7947&quot;&gt;Login redirects back to login screen&lt;/a&gt; (I get not setup properly when I try this)&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/15197&quot;&gt;Can&amp;#39;t start GUI in Elementary OS Loki 0.4.1&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/3042&quot;&gt;New install has a login loop&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Some info:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I'm running Juno&lt;/li&gt;&#xA;&lt;li&gt;I'm on a XPS 9550&lt;/li&gt;&#xA;&lt;li&gt;It has a Nvidia card but I haven't installed the Nvidia drivers&lt;/li&gt;&#xA;&lt;li&gt;I've removed those .Xauthority and .ICEauthority&lt;/li&gt;&#xA;&lt;li&gt;I've restarted lightdm&lt;/li&gt;&#xA;&lt;li&gt;No custom kernel&lt;/li&gt;&#xA;&lt;li&gt;No elementary tweaks&lt;/li&gt;&#xA;&lt;li&gt;My HD's and partitions aren't full&lt;/li&gt;&#xA;&lt;li&gt;I've reinstalled &lt;code&gt;elementary-desktop&lt;/code&gt; and &lt;code&gt;pantheon-greeter&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;I've added a new user (&lt;a href=&quot;http://www.upubuntu.com/2011/07/how-to-create-new-user-account-from.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructions&lt;/a&gt;) but I get the same behaivior when attempting to login to that user.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/var/log/lightdm&lt;/code&gt; from when I attempt to login:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[+3092.74s] DEBUG: Continue authentication&#xA;[+3092.79s] DEBUG: Session pid=3922: Authentication complete with return value 0: Success&#xA;[+3092.79s] DEBUG: Authenticate result for user peteruithoven: Success&#xA;[+3092.79s] DEBUG: User peteruithoven authorized&#xA;[+3093.43s] DEBUG: Greeter requests session pantheon&#xA;[+3093.43s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session&#xA;[+3093.43s] DEBUG: Terminating login1 session c3&#xA;[+3093.44s] DEBUG: Session pid=1931: Sending SIGTERM&#xA;[+3093.45s] DEBUG: Session pid=1931: Exited with return value 0&#xA;[+3093.45s] DEBUG: Seat seat0: Session stopped&#xA;[+3093.45s] DEBUG: Seat seat0: Greeter stopped, running session&#xA;[+3093.45s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1&#xA;[+3093.45s] DEBUG: Session pid=3922: Running command /usr/sbin/lightdm-session gnome-session --session=pantheon&#xA;[+3093.45s] DEBUG: Creating shared data directory /var/lib/lightdm-data/peteruithoven&#xA;[+3093.45s] DEBUG: Session pid=3922: Logging to .xsession-errors&#xA;[+3093.51s] DEBUG: Activating VT 7&#xA;[+3093.51s] DEBUG: Activating login1 session c4&#xA;[+3093.51s] DEBUG: Seat seat0 changes active session to c4&#xA;[+3093.51s] DEBUG: Session c4 is already active&#xA;[+3096.26s] DEBUG: Session pid=3922: Exited with return value 1&#xA;[+3096.26s] DEBUG: Seat seat0: Session stopped&#xA;[+3096.26s] DEBUG: Seat seat0: Stopping display server, no sessions require it&#xA;[+3096.26s] DEBUG: Sending signal 15 to process 1926&#xA;[+3098.10s] DEBUG: Process 1926 exited with return value 0&#xA;[+3098.10s] DEBUG: XServer 0: X server stopped&#xA;[+3098.10s] DEBUG: Releasing VT 7&#xA;[+3098.11s] DEBUG: XServer 0: Removing X server authority /var/run/lightdm/root/:0&#xA;[+3098.11s] DEBUG: Seat seat0: Display server stopped&#xA;[+3098.11s] DEBUG: Seat seat0: Active display server stopped, starting greeter&#xA;[+3098.11s] DEBUG: Seat seat0: Creating greeter session&#xA;[+3098.11s] DEBUG: Seat seat0: Creating display server of type x&#xA;[+3098.11s] DEBUG: Using VT 7&#xA;[+3098.11s] DEBUG: Seat seat0: Starting local X display on VT 7&#xA;[+3098.11s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log&#xA;[+3098.11s] DEBUG: XServer 0: Writing X server authority to /var/run/lightdm/root/:0&#xA;[+3098.11s] DEBUG: XServer 0: Launching X Server&#xA;[+3098.11s] DEBUG: Launching process 4251: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch&#xA;[+3098.11s] DEBUG: XServer 0: Waiting for ready signal from X server :0&#xA;[+3099.09s] DEBUG: Got signal 10 from process 4251&#xA;[+3099.09s] DEBUG: XServer 0: Got signal from X server :0&#xA;[+3099.09s] DEBUG: XServer 0: Connecting to XServer :0&#xA;[+3099.14s] DEBUG: Seat seat0: Display server ready, starting session authentication&#xA;[+3099.14s] DEBUG: Session pid=4256: Started with service 'lightdm-greeter', username 'lightdm'&#xA;[+3099.18s] DEBUG: Session pid=4256: Authentication complete with return value 0: Success&#xA;[+3099.18s] DEBUG: Seat seat0: Session authenticated, running command&#xA;[+3099.18s] DEBUG: Session pid=4256: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/io.elementary.greeter&#xA;[+3099.18s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm&#xA;[+3099.18s] DEBUG: Session pid=4256: Logging to /var/log/lightdm/seat0-greeter.log&#xA;[+3099.35s] DEBUG: Activating VT 7&#xA;[+3099.35s] DEBUG: Activating login1 session c5&#xA;[+3099.35s] DEBUG: Seat seat0 changes active session to c5&#xA;[+3099.35s] DEBUG: Session c5 is already active&#xA;[+3099.68s] DEBUG: Greeter connected version=1.26.0 api=1 resettable=false&#xA;[+3100.34s] DEBUG: Greeter start authentication for peteruithoven&#xA;[+3100.34s] DEBUG: Session pid=4360: Started with service 'lightdm', username 'peteruithoven'&#xA;[+3100.36s] DEBUG: Session pid=4360: Got 1 message(s) from PAM&#xA;[+3100.36s] DEBUG: Prompt greeter with 1 message(s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logs from ´journalctl´ when I tried to login:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4256 (lightdm) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4276 (lightdm-greeter) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4277 (io.elementary.g) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4282 (io.elementary.g) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4316 (wingpanel) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4341 (gsd-a11y-settin) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4343 (gsd-color) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4347 (gsd-power) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: session-c5.scope: Killing process 4349 (gsd-xsettings) with signal SIGTERM.&#xA;dec 18 15:27:01 xps systemd[1]: Stopping Session c5 of user lightdm.&#xA;dec 18 15:27:01 xps lightdm[4256]: pam_unix(lightdm-greeter:session): session closed for user lightdm&#xA;dec 18 15:27:01 xps lightdm[4360]: pam_unix(lightdm:session): session opened for user peteruithoven by (uid=0)&#xA;dec 18 15:27:01 xps systemd-logind[897]: New session c6 of user peteruithoven.&#xA;dec 18 15:27:01 xps systemd[1]: Started Session c6 of user peteruithoven.&#xA;dec 18 15:27:01 xps systemd[1]: Stopped Session c5 of user lightdm.&#xA;dec 18 15:27:01 xps systemd-logind[897]: Removed session c5.&#xA;dec 18 15:27:01 xps systemd[1]: Stopping User Manager for UID 110...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopping Virtual filesystem service...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopping D-Bus User Message Bus...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopping sandboxed app permission store...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopping Accessibility services bus...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopping flatpak document portal service...&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped target Default.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped sandboxed app permission store.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped Accessibility services bus.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped D-Bus User Message Bus.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped flatpak document portal service.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped Virtual filesystem service.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped target Basic System.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped target Sockets.&#xA;dec 18 15:27:01 xps systemd[4259]: Closed GnuPG network certificate management daemon.&#xA;dec 18 15:27:01 xps systemd[4259]: Closed GnuPG cryptographic agent and passphrase cache.&#xA;dec 18 15:27:01 xps systemd[4259]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).&#xA;dec 18 15:27:01 xps systemd[4259]: Closed GnuPG cryptographic agent (ssh-agent emulation).&#xA;dec 18 15:27:01 xps systemd[4259]: Closed GnuPG cryptographic agent and passphrase cache (restricted).&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped target Timers.&#xA;dec 18 15:27:01 xps systemd[4259]: Stopped target Paths.&#xA;dec 18 15:27:01 xps systemd[4259]: Closed D-Bus User Message Bus Socket.&#xA;dec 18 15:27:01 xps systemd[4259]: Reached target Shutdown.&#xA;dec 18 15:27:01 xps systemd[4259]: Starting Exit the Session...&#xA;dec 18 15:27:01 xps systemd[4259]: Received SIGRTMIN+24 from PID 4471 (kill).&#xA;dec 18 15:27:01 xps systemd[4260]: pam_unix(systemd-user:session): session closed for user lightdm&#xA;dec 18 15:27:01 xps systemd[1]: Stopped User Manager for UID 110.&#xA;dec 18 15:27:01 xps systemd[1]: Removed slice User Slice of lightdm.&#xA;dec 18 15:27:02 xps at-spi-bus-launcher[4057]: dbus-daemon[4062]: Activating service name='org.a11y.atspi.Registry' requested by ':1.9' (uid=1000 pid=4550 comm=&quot;/usr/lib/gnome-session/gnome-session-check-acceler&quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:02 xps at-spi-bus-launcher[4057]: dbus-daemon[4062]: Successfully activated service 'org.a11y.atspi.Registry'&#xA;dec 18 15:27:02 xps at-spi-bus-launcher[4057]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry&#xA;dec 18 15:27:02 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: Could not parse desktop file custom-command2.desktop or it references a not found TryExec binary&#xA;dec 18 15:27:02 xps gnome-session-binary[4439]: WARNING: Could not parse desktop file custom-command2.desktop or it references a not found TryExec binary&#xA;dec 18 15:27:02 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: Could not parse desktop file libinput-gestures.desktop or it references a not found TryExec binary&#xA;dec 18 15:27:02 xps gnome-session-binary[4439]: WARNING: Could not parse desktop file libinput-gestures.desktop or it references a not found TryExec binary&#xA;dec 18 15:27:02 xps kernel: rfkill: input handler disabled&#xA;dec 18 15:27:02 xps spice-vdagent[4577]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0&#xA;dec 18 15:27:02 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: App 'spice-vdagent.desktop' exited with code 1&#xA;dec 18 15:27:02 xps gnome-session-binary[4439]: WARNING: App 'spice-vdagent.desktop' exited with code 1&#xA;dec 18 15:27:02 xps io.elementary.dpms-helper.desktop[4591]: org.gnome.settings-daemon.plugins.power manage-dpms-defaults is false.&#xA;dec 18 15:27:02 xps io.elementary.dpms-helper.desktop[4591]: Using settings found in io.elementary.dpms (0 seconds = Never).&#xA;dec 18 15:27:02 xps io.elementary.dpms-helper.desktop[4591]:     Standby: 300 seconds&#xA;dec 18 15:27:02 xps io.elementary.dpms-helper.desktop[4591]:     Suspend: 0 seconds&#xA;dec 18 15:27:02 xps io.elementary.dpms-helper.desktop[4591]:     Off: 0 seconds&#xA;dec 18 15:27:02 xps gnome-keyring-pkcs11-pantheon.desktop[4620]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh&#xA;dec 18 15:27:02 xps gnome-keyring-ssh-pantheon.desktop[4597]: SSH_AUTH_SOCK=/run/user/1000/keyring/ssh&#xA;dec 18 15:27:02 xps dbus-daemon[942]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.147' (uid=1000 pid=4631 comm=&quot;/usr/lib/gnome-settings-daemon/gsd-rfkill &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:02 xps systemd[1]: Starting Hostname Service...&#xA;dec 18 15:27:02 xps dbus-daemon[942]: [system] Activating via systemd: service name='org.freedesktop.timedate1' unit='dbus-org.freedesktop.timedate1.service' requested by ':1.148' (uid=1000 pid=4586 comm=&quot;/usr/lib/gnome-settings-daemon/gsd-datetime &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:02 xps systemd[1]: Starting Time &amp;amp; Date Service...&#xA;dec 18 15:27:02 xps rtkit-daemon[1872]: Successfully made thread 4668 of process 4668 (n/a) owned by '1000' high priority at nice level -11.&#xA;dec 18 15:27:02 xps rtkit-daemon[1872]: Supervising 1 threads of 1 processes of 1 users.&#xA;dec 18 15:27:02 xps pulseaudio[4668]: [pulseaudio] pid.c: Stale PID file, overwriting.&#xA;dec 18 15:27:02 xps dbus-daemon[942]: [system] Activating via systemd: service name='org.freedesktop.locale1' unit='dbus-org.freedesktop.locale1.service' requested by ':1.151' (uid=1000 pid=4579 comm=&quot;/usr/lib/gnome-settings-daemon/gsd-keyboard &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:02 xps systemd[1]: Starting Locale Service...&#xA;dec 18 15:27:02 xps gsd-sharing[4589]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.service not loaded.&#xA;dec 18 15:27:02 xps gsd-sharing[4589]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit vino-server.service not loaded.&#xA;dec 18 15:27:02 xps gsd-xsettings[4616]: Failed to get current display configuration state: GDBus.Error:org.freedesktop.DBus.Error.NameHasNoOwner: Name &quot;org.gnome.Mutter.DisplayConfig&quot; does not exist&#xA;dec 18 15:27:02 xps dbus-daemon[942]: [system] Successfully activated service 'org.freedesktop.timedate1'&#xA;dec 18 15:27:02 xps systemd[1]: Started Time &amp;amp; Date Service.&#xA;dec 18 15:27:03 xps rtkit-daemon[1872]: Supervising 1 threads of 1 processes of 1 users.&#xA;dec 18 15:27:03 xps rtkit-daemon[1872]: Successfully made thread 4692 of process 4668 (n/a) owned by '1000' RT at priority 5.&#xA;dec 18 15:27:03 xps rtkit-daemon[1872]: Supervising 2 threads of 1 processes of 1 users.&#xA;dec 18 15:27:03 xps dbus-daemon[942]: [system] Successfully activated service 'org.freedesktop.hostname1'&#xA;dec 18 15:27:03 xps systemd[1]: Started Hostname Service.&#xA;dec 18 15:27:03 xps bluetoothd[906]: Endpoint registered: sender=:1.157 path=/MediaEndpoint/A2DPSource&#xA;dec 18 15:27:03 xps bluetoothd[906]: Endpoint registered: sender=:1.157 path=/MediaEndpoint/A2DPSink&#xA;dec 18 15:27:03 xps pulseaudio[4668]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files&#xA;dec 18 15:27:03 xps rtkit-daemon[1872]: Successfully made thread 4695 of process 4695 (n/a) owned by '1000' high priority at nice level -11.&#xA;dec 18 15:27:03 xps rtkit-daemon[1872]: Supervising 3 threads of 2 processes of 1 users.&#xA;dec 18 15:27:03 xps pulseaudio[4695]: [pulseaudio] pid.c: Daemon already running.&#xA;dec 18 15:27:03 xps dbus-daemon[942]: [system] Successfully activated service 'org.freedesktop.locale1'&#xA;dec 18 15:27:03 xps systemd[1]: Started Locale Service.&#xA;dec 18 15:27:03 xps gala.desktop[4703]: Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.&#xA;dec 18 15:27:03 xps gala.desktop[4703]: Window manager warning: Trying to re-add keybinding &quot;switch-to-workspace-last&quot;.&#xA;dec 18 15:27:03 xps gala.desktop[4703]: Window manager warning: Trying to re-add keybinding &quot;move-to-workspace-last&quot;.&#xA;dec 18 15:27:03 xps gala[4703]: Settings schema 'org.pantheon.desktop.gala.keybindings' does not contain a key named 'tile-topleft'&#xA;dec 18 15:27:03 xps kernel: traps: gala[4703] trap int3 ip:7f9f8d916e11 sp:7ffed9ccb9f0 error:0 in libglib-2.0.so.0.5600.3[7f9f8d8c5000+113000]&#xA;dec 18 15:27:03 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: Application 'gala.desktop' killed by signal 5&#xA;dec 18 15:27:03 xps gnome-session-binary[4439]: WARNING: Application 'gala.desktop' killed by signal 5&#xA;dec 18 15:27:03 xps gsd-power[4626]: Failed to acquire idle monitor object manager: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying&#xA;dec 18 15:27:04 xps gala.desktop[4716]: Window manager warning: Trying to re-add keybinding &quot;switch-to-workspace-last&quot;.&#xA;dec 18 15:27:04 xps gala.desktop[4716]: Window manager warning: Trying to re-add keybinding &quot;move-to-workspace-last&quot;.&#xA;dec 18 15:27:04 xps gala[4716]: Settings schema 'org.pantheon.desktop.gala.keybindings' does not contain a key named 'tile-topleft'&#xA;dec 18 15:27:04 xps kernel: traps: gala[4716] trap int3 ip:7f5624a5ae11 sp:7ffd47f3fe00 error:0 in libglib-2.0.so.0.5600.3[7f5624a09000+113000]&#xA;dec 18 15:27:04 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: Application 'gala.desktop' killed by signal 5&#xA;dec 18 15:27:04 xps gnome-session[4439]: gnome-session-binary[4439]: WARNING: App 'gala.desktop' respawning too quickly&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: WARNING: Application 'gala.desktop' killed by signal 5&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: WARNING: App 'gala.desktop' respawning too quickly&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: Unrecoverable failure in required component gala.desktop&#xA;dec 18 15:27:04 xps gnome-session[4439]: gnome-session-binary[4439]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;dec 18 15:27:04 xps kernel: rfkill: input handler enabled&#xA;dec 18 15:27:04 xps lightdm[4360]: pam_unix(lightdm:session): session closed for user peteruithoven&#xA;dec 18 15:27:04 xps bluetoothd[906]: Endpoint unregistered: sender=:1.157 path=/MediaEndpoint/A2DPSource&#xA;dec 18 15:27:04 xps bluetoothd[906]: Endpoint unregistered: sender=:1.157 path=/MediaEndpoint/A2DPSink&#xA;dec 18 15:27:04 xps gsd-wacom[4571]: gsd-wacom: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps gsd-color[4565]: gsd-color: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps at-spi-bus-launcher[4057]: XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server &quot;:0&quot;&#xA;dec 18 15:27:04 xps at-spi-bus-launcher[4057]:       after 21 requests (21 known processed) with 0 events remaining.&#xA;dec 18 15:27:04 xps gsd-media-keys[4566]: gsd-media-keys: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps gsd-clipboard[4585]: gsd-clipboard: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps gsd-xsettings[4616]: gsd-xsettings: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps gsd-power[4626]: gsd-power: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:04 xps gsd-keyboard[4579]: gsd-keyboard: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM adding faulty module: pam_kwallet.so&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM adding faulty module: pam_kwallet5.so&#xA;dec 18 15:27:07 xps lightdm[4731]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)&#xA;dec 18 15:27:07 xps systemd[1]: Created slice User Slice of lightdm.&#xA;dec 18 15:27:07 xps systemd[1]: Starting User Manager for UID 110...&#xA;dec 18 15:27:07 xps systemd-logind[897]: New session c7 of user lightdm.&#xA;dec 18 15:27:07 xps systemd[1]: Started Session c7 of user lightdm.&#xA;dec 18 15:27:07 xps systemd[4734]: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)&#xA;dec 18 15:27:07 xps systemd[4734]: Reached target Timers.&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on GnuPG network certificate management daemon.&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on GnuPG cryptographic agent (ssh-agent emulation).&#xA;dec 18 15:27:07 xps systemd[4734]: Starting D-Bus User Message Bus Socket.&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).&#xA;dec 18 15:27:07 xps systemd[4734]: Reached target Paths.&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on GnuPG cryptographic agent and passphrase cache (access for web browsers).&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on GnuPG cryptographic agent and passphrase cache.&#xA;dec 18 15:27:07 xps systemd[4734]: Listening on D-Bus User Message Bus Socket.&#xA;dec 18 15:27:07 xps systemd[4734]: Reached target Sockets.&#xA;dec 18 15:27:07 xps systemd[4734]: Reached target Basic System.&#xA;dec 18 15:27:07 xps systemd[4734]: Reached target Default.&#xA;dec 18 15:27:07 xps systemd[4734]: Startup finished in 89ms.&#xA;dec 18 15:27:07 xps systemd[1]: Started User Manager for UID 110.&#xA;dec 18 15:27:07 xps systemd[4734]: Started D-Bus User Message Bus.&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] AppArmor D-Bus mediation is enabled&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.a11y.Bus' unit='at-spi-dbus-bus.service' requested by ':1.2' (uid=110 pid=4752 comm=&quot;/usr/sbin/io.elementary.greeter &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting Accessibility services bus...&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Successfully activated service 'org.a11y.Bus'&#xA;dec 18 15:27:07 xps systemd[4734]: Started Accessibility services bus.&#xA;dec 18 15:27:07 xps at-spi-bus-launcher[4761]: dbus-daemon[4769]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=110 pid=4752 comm=&quot;/usr/sbin/io.elementary.greeter &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps at-spi-bus-launcher[4761]: dbus-daemon[4769]: Successfully activated service 'org.a11y.atspi.Registry'&#xA;dec 18 15:27:07 xps at-spi-bus-launcher[4761]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.gtk.vfs.Daemon' unit='gvfs-daemon.service' requested by ':1.1' (uid=110 pid=4752 comm=&quot;/usr/sbin/io.elementary.greeter &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting Virtual filesystem service...&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Successfully activated service 'org.gtk.vfs.Daemon'&#xA;dec 18 15:27:07 xps systemd[4734]: Started Virtual filesystem service.&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating service name='ca.desrt.dconf' requested by ':1.1' (uid=110 pid=4752 comm=&quot;/usr/sbin/io.elementary.greeter &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Successfully activated service 'ca.desrt.dconf'&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.freedesktop.portal.Desktop' unit='xdg-desktop-portal.service' requested by ':1.10' (uid=110 pid=4791 comm=&quot;wingpanel -g &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting Portal service...&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.freedesktop.portal.Documents' unit='xdg-document-portal.service' requested by ':1.12' (uid=110 pid=4796 comm=&quot;/usr/lib/xdg-desktop-portal/xdg-desktop-portal &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting flatpak document portal service...&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.freedesktop.impl.portal.PermissionStore' unit='xdg-permission-store.service' requested by ':1.13' (uid=110 pid=4800 comm=&quot;/usr/lib/xdg-desktop-portal/xdg-document-portal &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting sandboxed app permission store...&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Successfully activated service 'org.freedesktop.impl.portal.PermissionStore'&#xA;dec 18 15:27:07 xps systemd[4734]: Started sandboxed app permission store.&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Successfully activated service 'org.freedesktop.portal.Documents'&#xA;dec 18 15:27:07 xps systemd[4734]: Started flatpak document portal service.&#xA;dec 18 15:27:07 xps dbus-daemon[4754]: [session uid=110 pid=4754] Activating via systemd: service name='org.freedesktop.impl.portal.desktop.gtk' unit='xdg-desktop-portal-gtk.service' requested by ':1.12' (uid=110 pid=4796 comm=&quot;/usr/lib/xdg-desktop-portal/xdg-desktop-portal &quot; label=&quot;unconfined&quot;)&#xA;dec 18 15:27:07 xps systemd[4734]: Starting Portal service (GTK+/GNOME implementation)...&#xA;dec 18 15:27:07 xps xdg-desktop-portal-gtk[4814]: Unable to init server: Could not connect: Connection refused&#xA;dec 18 15:27:07 xps xdg-desktop-por[4814]: cannot open display: &#xA;dec 18 15:27:07 xps systemd[4734]: xdg-desktop-portal-gtk.service: Main process exited, code=exited, status=1/FAILURE&#xA;dec 18 15:27:07 xps systemd[4734]: xdg-desktop-portal-gtk.service: Failed with result 'exit-code'.&#xA;dec 18 15:27:07 xps systemd[4734]: Failed to start Portal service (GTK+/GNOME implementation).&#xA;dec 18 15:27:08 xps at-spi-bus-laun[4761]: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such method 'RegisterClient'&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM adding faulty module: pam_kwallet.so&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM adding faulty module: pam_kwallet5.so&#xA;dec 18 15:27:08 xps lightdm[4826]: pam_succeed_if(lightdm:auth): requirement &quot;user ingroup nopasswdlogin&quot; not met by user &quot;peteruithoven&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The parts that are red:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dec 18 15:27:02 xps spice-vdagent[4577]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0&#xA;dec 18 15:27:03 xps pulseaudio[4668]: [pulseaudio] backend-ofono.c: Failed to register as a handsfree audio agent with ofono: org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files&#xA;dec 18 15:27:03 xps pulseaudio[4695]: [pulseaudio] pid.c: Daemon already running.&#xA;dec 18 15:27:03 xps gala[4703]: Settings schema 'org.pantheon.desktop.gala.keybindings' does not contain a key named 'tile-topleft'&#xA;dec 18 15:27:04 xps gala[4716]: Settings schema 'org.pantheon.desktop.gala.keybindings' does not contain a key named 'tile-topleft'&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: Unrecoverable failure in required component gala.desktop&#xA;dec 18 15:27:04 xps gnome-session-binary[4439]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM adding faulty module: pam_kwallet.so&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:07 xps lightdm[4731]: PAM adding faulty module: pam_kwallet5.so&#xA;dec 18 15:27:07 xps systemd[4734]: Failed to start Portal service (GTK+/GNOME implementation).&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM unable to dlopen(pam_kwallet.so): /lib/security/pam_kwallet.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM adding faulty module: pam_kwallet.so&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM unable to dlopen(pam_kwallet5.so): /lib/security/pam_kwallet5.so: cannot open shared object file: No such file or directory&#xA;dec 18 15:27:08 xps lightdm[4826]: PAM adding faulty module: pam_kwallet5.so&#xA;dec 18 15:27:32 xps systemd[4734]: Failed to start Portal service.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2018-12-18T16:51:46.260" Title="Can't login, in a Login loop" Tags="|greeter|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17581" PostTypeId="1" CreationDate="2018-12-18T15:05:24.913" Score="0" ViewCount="75" Body="&lt;p&gt;I have a VicTsing USB 3.0 to hdmi donggle, but it doesn work with elementary, do you know any donggle compatible with this sistem, I just have 1 hdmi and I use 2 monitors. Thank you&lt;/p&gt;&#xA;" OwnerUserId="15699" LastActivityDate="2019-01-18T18:04:05.853" Title="Which usb monitor adaptor is compatible?" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17582" PostTypeId="2" ParentId="17580" CreationDate="2018-12-18T15:09:29.997" Score="3" Body="&lt;p&gt;Found the solution! I was to blame. I noticed the following error from journalctl:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dec 18 15:27:03 xps gala[4703]: Settings schema 'org.pantheon.desktop.gala.keybindings' does not contain a key named 'tile-topleft'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is a key binding from my &lt;a href=&quot;https://github.com/elementary/gala/pull/408&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gala Quarter tiling pull request&lt;/a&gt; that I'm running locally. &#xA;Apparently my quarter tiling plugin was still there (in /usr/lib/x86_64-linux-gnu/gala/plugins/), it was triggered, but because it was missing it's settings keys it crashed Gala. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All I had to do was re-compile and install my custom gala version. This works because it reintroduces the settings keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another solution is to remove the specific plugin:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/lib/x86_64-linux-gnu/gala/plugins/libgala-quartertiler.so&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2018-12-18T16:51:46.260" LastActivityDate="2018-12-18T16:51:46.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17583" PostTypeId="2" ParentId="16514" CreationDate="2018-12-18T18:19:24.383" Score="5" Body="&lt;p&gt;I use this script now &lt;a href=&quot;https://github.com/yamnikov-oleg/switch-layout&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/yamnikov-oleg/switch-layout&lt;/a&gt;&#xA;Works fine!&lt;/p&gt;&#xA;" OwnerUserId="15910" LastActivityDate="2018-12-18T18:19:24.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17584" PostTypeId="2" ParentId="16439" CreationDate="2018-12-18T19:23:51.690" Score="3" Body="&lt;p&gt;In Terminal, without installing anything:&lt;br/&gt;&#xA;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior hotcorner-topright 'minimize-current'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-12-18T19:23:51.690" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17585" PostTypeId="2" ParentId="12548" CreationDate="2018-12-18T19:42:52.383" Score="7" Body="&lt;p&gt;I was able to adjust mine.  Not sure if an update will affect it but now that i know where it is at i can reset it back to my liking should an update change it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, open files as an administrator.  Do this by right clicking files and selecting open as administrator.  Then you will have to select the root file system folder on the left hand side.  from there, here is the path to the file you will change.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;usr/share/themes/elementary/gt-k3.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The file you are going to change is named &lt;code&gt;apps.css&lt;/code&gt;. I opened it with &lt;a href=&quot;/questions/tagged/code&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;code&amp;#39;&quot; rel=&quot;tag&quot;&gt;code&lt;/a&gt; by right clicking and selecting code from the &quot;open with&quot; selection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NOTE&lt;/strong&gt;: If there are lock symbols on the files and folders than you are not in as an administrator. You will not to be able to save your changes unless you are an administrator.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once into the file, scroll most of the way down until you see:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;composited-indicator {&#xA;    padding: 0 6px;&#xA;}&#xA;&#xA;.composited-indicator &amp;gt; revealer label,&#xA;.composited-indicator &amp;gt; revealer image,&#xA;.composited-indicator &amp;gt; revealer spinner {&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the line that says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;padding 0 6px;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is the one that you will modify. Change the 6 to a 2. It should then look like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;composited-indicator {&#xA;    padding: 0 2px;&#xA;}&#xA;&#xA;.composited-indicator &amp;gt; revealer label,&#xA;.composited-indicator &amp;gt; revealer image,&#xA;.composited-indicator &amp;gt; revealer spinner {&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once done exit and restart your system.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;:  This answer is not my own, i had found this work around previously here on the site but haven't relocated it in order to provide a link and kudos back to the original poster.  if someone does find it please feel free to post link. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2.0&lt;/strong&gt;: link to original answer,&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17531/how-do-i-decrease-the-gap-between-icons-in-the-status-tray&quot;&gt;How do I decrease the gap between icons in the status tray?&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="16744" LastEditorUserId="14940" LastEditDate="2018-12-29T04:54:01.743" LastActivityDate="2018-12-29T04:54:01.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17587" PostTypeId="1" AcceptedAnswerId="17607" CreationDate="2018-12-18T20:14:09.110" Score="0" ViewCount="386" Body="&lt;p&gt;After 2 years without an issue, since 2 days ago my Loki has started freezing during the shutdown (as well as rebooting) process.&lt;br&gt;&#xA;I have tried the most common solutions found on the internet (working on GRUB, booting into an earlier Kernel), but to no avail.&lt;br&gt;&#xA;When I shut down, it freezes on the shutdown image (elementary OS logo, at this point not &quot;pulsating&quot; any longer, just stuck, and the screeen won't turn off). Pressing ESC reveal what you can see in the picture below, fixed and unchanged.&lt;br&gt;&#xA;I will be very grateful to anyone trying to help with this!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xanhc.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xanhc.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ADDENDUM:&lt;br&gt;&#xA;Running   &lt;code&gt;apt policy systemd&lt;/code&gt;&lt;br&gt;&#xA;Gives me  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemd:&#xA;  Installed: 229-4ubuntu21.10&#xA;  Candidate: 229-4ubuntu21.10&#xA;  Version table:&#xA; *** 229-4ubuntu21.10 500&#xA;        500 http://it.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages&#xA;        500 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     229-4ubuntu4 500&#xA;        500 http://it.archive.ubuntu.com/ubuntu xenial/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11802" LastEditorUserId="14940" LastEditDate="2018-12-19T17:56:44.087" LastActivityDate="2018-12-21T07:36:03.507" Title="Elementary OS Loki hangs during shutdown" Tags="|release-loki|shutdown|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17588" PostTypeId="2" ParentId="17319" CreationDate="2018-12-18T20:17:53.167" Score="1" Body="&lt;p&gt;Are you trying to install Loki or Juno?  I have Loki installed on a near identical Oryx Pro and it works pretty well.  In fact, it's one of the few Linux installations that works well on the Oryx Pro, although there will be some teething issues.  (Be sure to install the System 76 driver package.)  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can't get Juno to install, try installing Loki. You will also want to install Touchpad Indicator to disable the touchpad when typing.  I don't know if Juno fixes this or not, but it's irritating.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried POP OS from System 76 and really hated it.  Elementary OS is a much better solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will find with Elementary OS on the 4k display you will have to tweak a lot of things to get it to look right. I've since regretted getting the 4k display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note:  Do not use any of the Xubuntu releases (including Ubuntu Studio.)  They do not play well with the System 76 4k display for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that was helpful.&lt;/p&gt;&#xA;" OwnerUserId="10384" LastActivityDate="2018-12-18T20:17:53.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17589" PostTypeId="2" ParentId="17567" CreationDate="2018-12-18T20:36:34.760" Score="1" Body="&lt;p&gt;According to &lt;a href=&quot;https://www.reddit.com/r/AMDHelp/comments/7dh5tq/wx_2100_on_linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; the AMD PRO WX 2100 doesn't work really well under linux at the moment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updating your kernel to a more recent version may make it work. &lt;a href=&quot;https://kernel.ubuntu.com/~kernel-ppa/mainline/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you can download the necessary packages.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you want to install elementary on UEFI mode you need to set your bios/firmware to UEFI mode and then boot the usb. The key to open the boot menu varies between different motherboards but it's usually F10, F12 or so. If you get into a infinite loop it's because your system didn't detect your bootable USB or you didn't set correctly the first boot device.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-12-18T20:36:34.760" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17590" PostTypeId="1" AcceptedAnswerId="17596" CreationDate="2018-12-18T20:50:54.213" Score="0" ViewCount="1542" Body="&lt;p&gt;For some reason I am having trouble getting my trackpad fully working. It feels fine and works well for the most part, including scrolling and tap to click, but I have issues with doing anything with 3+ fingers. For example, I have known that a 3 finger tap should initiate a middle button click. It just acts exactly the same as a 2 finger click. Same situation with 3+ finger swiping: it just scrolls as if there are only 2 fingers on the trackpad. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am certain that my trackpad can support more than 2 fingers since it does work fine on Windows. It is registered as &quot;ALPSPS/2 ALPS Glidepoint&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I attempted to see the max touch points it will take via geis-tools but it appears to only show my touch screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;System is a Dell e7250, was also experiencing(albeit much worse) issues chromium. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not found a conf file for the touchpad so I assume I need to generate one? I'm still getting my bearings for Linux so advice is appreciated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;: Also wanted to add that I had installed(then removed) and configure both libinput-gestures and fusuma and neither exhibited support either so I think it may be something with the driver being used. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;New edit&lt;/strong&gt;: I uninstalled libinput and installed evdev as well as synaptics and things are working better. While it means I can't use Fusuma or Libinput-gestures, it does mean that 3 finger clicking is working again and if I can find a gesture package that is compatible I should be able to configure 3 finger gestures at the very least. I don't know if this should be closed at this point because it is more an issue with libinput than it is with eOS. I don't know why lib doesn't support more than 2 fingers for my pad or if that will ever come. &lt;/p&gt;&#xA;" OwnerUserId="16768" LastEditorUserId="16827" LastEditDate="2019-01-02T23:25:59.457" LastActivityDate="2019-01-02T23:25:59.457" Title="Can't get multitouch(3+ finger) working on eOS" Tags="|settings|release-juno|touchpad|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17591" PostTypeId="2" ParentId="17590" CreationDate="2018-12-18T23:58:47.377" Score="0" Body="&lt;p&gt;Probably this could work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/214747/890782&quot;&gt;https://askubuntu.com/a/214747/890782&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm sorry that I can't say much about it but just point out the link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-18T23:58:47.377" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17592" PostTypeId="2" ParentId="16512" CreationDate="2018-12-19T17:26:19.147" Score="1" Body="&lt;p&gt;I installed Juno yesterday, and night light was working during installation from an USB, but later it did not show up, and I experienced the same behavior. And it's weird, but just setting the schedule to manual and changing the time made it show up and work perfectly. Hope it helps &lt;/p&gt;&#xA;" OwnerUserId="16770" LastActivityDate="2018-12-19T17:26:19.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17593" PostTypeId="2" ParentId="17590" CreationDate="2018-12-19T17:32:53.913" Score="0" Body="&lt;p&gt;I don't have the same touchpad as you, Logitech T650, but here is how I got 3 and 4 finger libinput gestures working for the touchpad AND laptop touchpad, Dell XPS 15 9570.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the following commands, per &lt;a href=&quot;https://github.com/bulletmark/libinput-gestures#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;libinput-gestures instructions&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Add yourself to input group&#xA;sudo gpasswd -a $USER input&#xA;&#xA;# Install utilities needed by libinput-gestures&#xA;sudo apt-get install -y xdotool wmctrl libinput-tools&#xA;&#xA;# Get code and install&#xA;git clone http://github.com/bulletmark/libinput-gestures&#xA;cd libinput-gestures&#xA;sudo ./libinput-gestures-setup install&#xA;&#xA;# Clean up&#xA;cd ../&#xA;rm -r libinput-gestures&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To customize the gestures, you should run &lt;code&gt;cp /etc/libinput-gestures.conf ~/.config/libinput-gestures.conf&lt;/code&gt;. Then open &lt;code&gt;~/.config/libinput-gestures.conf&lt;/code&gt; in your favorite text editor to customize your gestures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last you need to actually start the service and set it to auto run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libinput-gestures-setup start &amp;amp;&amp;amp; libinput-gestures-setup autostart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At this point, I would recommend restarting your device and then checking to see if it works as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are several custom gestures I added to make it more &quot;Mac-Like&quot;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Open close overview with 3 figure swipe&#xA;gesture swipe up    3 xdotool key super+a&#xA;gesture swipe down  3 xdotool key Escape&#xA;&#xA;# Navigate workspaces, swiping right moves to the left workspace, left to the right &#xA;gesture swipe right 3 _internal ws_down&#xA;gesture swipe left  3 _internal ws_up&#xA;&#xA;#Optional, but have to do this so gestures work on touchpad and laptop&#xA;device all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16603" LastEditorUserId="16603" LastEditDate="2018-12-19T17:38:34.490" LastActivityDate="2018-12-19T17:38:34.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17594" PostTypeId="2" ParentId="17581" CreationDate="2018-12-19T17:34:47.000" Score="1" Body="&lt;p&gt;Here is a link that has some good info on what you are experiencing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.displaylink.org/forum/showthread.php?t=65301&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.displaylink.org/forum/showthread.php?t=65301&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;of note, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;I have a Dell Inspiron 15 7537 with nvidia primus disabled, so it's only intel graphics. I have a triple-monitor setup; laptop screen + Dell 1080p (HDMI) + Dell 1080p (USB-&gt;HDMI (DisplayLink) -&gt; DVI (generic adapter)). Dell D3100 and CableCreation adapter work for me. I use v4.2 driver on Ubuntu 18.04 with this workaround.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps man.&lt;/p&gt;&#xA;" OwnerUserId="16744" LastActivityDate="2018-12-19T17:34:47.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17595" PostTypeId="2" ParentId="17587" CreationDate="2018-12-19T17:50:29.067" Score="1" Body="&lt;p&gt;I could tell you to downgrade &lt;code&gt;systemd&lt;/code&gt; right away, but you will be able to do it only to the first release not the last update. You'll miss a lot of fixes with it, check the changelog below for more details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://changelogs.ubuntu.com/changelogs/pool/main/s/systemd/systemd_229-4ubuntu21.10/changelog&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://changelogs.ubuntu.com/changelogs/pool/main/s/systemd/systemd_229-4ubuntu21.10/changelog&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to report this to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/systemd&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/systemd&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, and then decide what to do.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now If you want to test to downgrade &lt;code&gt;systemd&lt;/code&gt; anyway...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install systemd=229-4ubuntu4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hold that version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark hold systemd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You'll probably have some unmet dependencies like &lt;code&gt;libsystemd0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just add that dependency to the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install systemd=229-4ubuntu4 libsystemd0=&amp;lt;version_needed&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-19T17:50:29.067" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17596" PostTypeId="2" ParentId="17590" CreationDate="2018-12-19T19:13:34.557" Score="0" Body="&lt;p&gt;I figured out what worked for me. It all revolves around major support issues with the default libinput driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you Don't care about advanced gestures and only want default gestures such as middle click:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove xserver-xorg-input-libinput &amp;amp;&amp;amp; sudo apt install xserver-xorg-input-synaptics xserver-xorg-input-evdev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you want advanced gestures follow the instructions in the github link below as well&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using synaptics drivers will not allow you to use fusuma or libinput-gestures since those both rely on the libinput driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/iberianpig/xSwipe&quot; rel=&quot;nofollow noreferrer&quot;&gt;xSwipe by iberianpig on Github&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16768" LastActivityDate="2018-12-19T19:13:34.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17599" PostTypeId="1" CreationDate="2018-12-20T10:34:33.193" Score="1" ViewCount="24" Body="&lt;p&gt;How do I stop the behavior where dragging windows across another window makes them &quot;stick&quot; together for a bit. I want to turn that behavior off completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what I mean:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.imgur.com/6F4XqMe.gifv&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.imgur.com/6F4XqMe.gifv&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16719" LastEditorUserId="16719" LastEditDate="2018-12-20T19:39:44.497" LastActivityDate="2018-12-20T19:39:44.497" Title="Prevent windows from sticking to others while being dragged?" Tags="|settings|release-juno|pantheon|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17601" PostTypeId="2" ParentId="12538" CreationDate="2018-12-20T15:51:10.657" Score="1" Body="&lt;p&gt;It depends how the game uses the configurations: if the game uses SDL (FEZ, for example), you can try to modify the gamecontrollerdb.txt, or you can create an environment variable with a new mapping. Check this site: &lt;a href=&quot;http://generalarcade.com/gamepadtool/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://generalarcade.com/gamepadtool/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually, emulators allow to remap the controller, you can check the settings in the application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you want to map the keyboard to the joystick, i recommend Qjoypad&lt;/p&gt;&#xA;" OwnerUserId="16776" LastActivityDate="2018-12-20T15:51:10.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17603" PostTypeId="2" ParentId="16795" CreationDate="2018-12-20T17:32:57.983" Score="0" Body="&lt;p&gt;Ok, I found out that two big culprits of the slow boot, at least on my Dell XPS 9550, were the LVM and encryption that I turned on during install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that with some SSD models, this causes a bug that adds up time at boot. I reinstalled without checking those those boxes and boot times are as follows, around 30 seconds less:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 17.153s (firmware) + 7.527s (loader) + 5.377s (kernel) + 919ms (userspace) = 30.977s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2018-12-20T17:32:57.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17604" PostTypeId="1" CreationDate="2018-12-20T23:31:13.677" Score="2" ViewCount="372" Body="&lt;p&gt;I installed Juno a couple weeks ago on a new laptop. I have elementaryOS on one hard drive and Windows 10 on a second hard drive -- no partitioning, just physically separate drives.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I initially installed eOS, it didn't install Grub, I don't think. At least, the Grub menu didn't appear when I booted; it would boot automatically into eOS and, if I needed Windows, I would manually select it from the BIOS boot menu. This is how I like it, because I barely use Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today, I booted up and the Grub menu came up after the logo splash screen. I don't know if it got automatically installed in an OS update maybe? But as I understand it, it should be unnecessary, because my OSs are on separate physical drives; is that not the case?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched around for how to remove Grub but all of the instructions I've found are for removing Linux &lt;em&gt;entirely&lt;/em&gt;, which of course I don't want to do. How do I go back to booting directly to Linux? And, how do I prevent Grub from getting automatically added like this, if indeed it is part of a routine OS update?&lt;/p&gt;&#xA;" OwnerUserId="8807" LastEditorUserId="14940" LastEditDate="2019-01-02T23:25:56.853" LastActivityDate="2019-01-02T23:25:56.853" Title="Grub appeared out of nowhere. How do I remove it?" Tags="|boot|release-juno|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17605" PostTypeId="2" ParentId="17604" CreationDate="2018-12-21T02:16:00.513" Score="1" Body="&lt;h2&gt;Concepts&lt;/h2&gt;&#xA;&lt;p&gt;is the key word here&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;no partitioning, just physically separate drives.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I understand what you mean but even one is a &lt;strong&gt;Partition&lt;/strong&gt; that has a &lt;strong&gt;Format&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;When I initially installed eOS, it didn't install Grub, I don't think.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Grub comes with eOS as default (AFAIK every Linux distro comes with Grub), and If you have multiple OS installed the menu will show as default&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;At least, the Grub menu didn't appear when I booted; it would boot automatically into eOS and,&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Don't know why didn't showed up, but if you have multiple systems is normal to have it. Probably the first boot didn't showed (normal) but after the normal is to show up&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;if I needed Windows, I would manually select it from the BIOS boot menu. This is how I like it, because I barely use Windows.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;It can be done within grub, you don't need to choose that in the BIOS (I'll explain later)&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Today, I booted up and the Grub menu came up after the logo splash screen. I don't know if it got automatically installed in an OS update maybe? But as I understand it, it should be unnecessary, because my OSs are on separate physical drives; is that not the case?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Comes with eOS, is its bootloader. Without it Linux will not boot.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I've searched around for how to remove Grub but all of the instructions I've found are for removing Linux entirely, which of course I don't want to do.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Because Linux needs a bootloader. In this case is Grub&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;How do I go back to booting directly to Linux? And, how do I prevent Grub from getting automatically added like this, if indeed it is part of a routine OS update?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Grub isn't added, when you installed elementaryOS you installed grub because you installed elementaryOS. Like you installed the Linux kernel because you installed elementaryOS. There are other bootloaders that you can install like lilo, burg or syslinux but they do the same&lt;/p&gt;&#xA;&lt;p&gt;Windows also has his own bootloader called &amp;quot;Windows boot manager&amp;quot;, you see it (part of it) everytime you choose the path to boot into safe mode&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;Your solution&lt;/h2&gt;&#xA;&lt;p&gt;is not to &amp;quot;remove grub&amp;quot; or &amp;quot;choose windows in the BIOS&amp;quot;. Is basically to use grub and configure it properly.&lt;/p&gt;&#xA;&lt;p&gt;You can hide Grub's menu so it will not show even with multiple OS installed&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit (I will use &lt;code&gt;nano&lt;/code&gt; you choose your editor)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change the line where it says &lt;code&gt;GRUB_TIMEOUT_STYLE&lt;/code&gt;, should look like this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; GRUB_TIMEOUT_STYLE=hidden&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;, you probably had &lt;code&gt;GRUB_TIMEOUT_STYLE=menu&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Update Grub&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then in the future, when you want to start Windows (or see grub's menu) just let the system boot and after the BIOS POST press &lt;kbd&gt;SHIFT&lt;/kbd&gt; (like you press &lt;kbd&gt;DEL&lt;/kbd&gt; when you want to enter BIOS) and will show grub and there you can choose another OS to boot, in your case Windows&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;As reference;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.gnu.org/software/grub/manual/grub/grub.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;GRUB manual&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Recommend to watch (Youtube):&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=qIEGavnI-B4&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux Boot Process: Grub, initrd, explained.&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=RdbyPwo4W2E&quot; rel=&quot;nofollow noreferrer&quot;&gt;The Linux Boot Process&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2018-12-21T02:26:07.740" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17607" PostTypeId="2" ParentId="17587" CreationDate="2018-12-21T07:36:03.507" Score="1" Body="&lt;p&gt;The bug was resolved with the latest kernel update, version 4.15.0-42-generic.&#xA;No further action was required&lt;/p&gt;&#xA;" OwnerUserId="11802" LastActivityDate="2018-12-21T07:36:03.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17608" PostTypeId="1" CreationDate="2018-12-21T09:53:31.950" Score="3" ViewCount="318" Body="&lt;p&gt;Hullo,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've just installed Elementary, and upon inserting a CD, I found that I can't open the music player. It starts, but the window only persists for a moment. Leaving it open before inserting the disc closes the application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Due to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2504/unable-to-play-music-in-elementary-os-default-music-player&quot;&gt;this thread&lt;/a&gt;, I thought this might be a codec problem, so I installed &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt;, and also tried deleting the database in &lt;code&gt;~/.local/share/noise/&lt;/code&gt;, to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found that I can play CDs with the Clementine music player, but I'd rather use the default application if possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd be grateful for any help in resolving this, or if this is an unknown bug, a place to submit a bug report. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="16781" LastActivityDate="2023-12-26T02:06:55.790" Title="ElementaryOS music player doesn't open when CD is inserted" Tags="|release-juno|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17609" PostTypeId="2" ParentId="17608" CreationDate="2018-12-21T11:51:26.897" Score="0" Body="&lt;p&gt;You can file a bug report by opening an issue at the relevant GitHub repository. Or even better, contribute to the one already opened here which I just found: &lt;a href=&quot;https://github.com/elementary/music/issues/437&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/music/issues/437&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-21T11:51:26.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17610" PostTypeId="2" ParentId="17347" CreationDate="2018-12-21T15:34:05.443" Score="2" Body="&lt;p&gt;Open the .bashrc file in your home directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Near the bottom of the file you will see the mentioned troublesome line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;esac# added by Anaconda3 5.3.1 installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;just add a newline and save, so it looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    esac&#xA;&#xA;# added by Anaconda3 5.3.1 installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16782" LastActivityDate="2018-12-21T15:34:05.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17611" PostTypeId="1" CreationDate="2018-12-21T16:46:54.637" Score="0" ViewCount="445" Body="&lt;p&gt;I freshly installed ElementaryOS, I speak French, have a QWERTY keyboard so I use English (US, international with dead keys) keyboard (useful to do &quot;é&quot; for exemple)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it's supposed to do a &quot;ç&quot; when I press ' and then &quot;c&quot; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it does &quot;ć&quot; (which is sadly useless in French)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to edit that myself? Or is it an error in ElementaryOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank's for help !&lt;/p&gt;&#xA;" OwnerUserId="16783" LastEditorUserId="16783" LastEditDate="2018-12-21T20:29:59.040" LastActivityDate="2020-04-16T07:32:57.947" Title="How to replace ç (c cedilla) with English (US, international with dead keys) keyboard" Tags="|keyboard|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17613" PostTypeId="2" ParentId="17611" CreationDate="2018-12-21T17:43:28.703" Score="1" Body="&lt;p&gt;Install Character Map from AppCenter and then insert the special character with &lt;code&gt;Ctrl+Shift+u+unicode number of the character+Enter&lt;/code&gt;, the unicode number that you get from the Character Map. For ç it's &lt;code&gt;Ctrl+Shift+u+00e7&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2018-12-21T17:43:28.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17614" PostTypeId="1" CreationDate="2018-12-21T20:53:27.367" Score="0" ViewCount="480" Body="&lt;p&gt;As the title says the touchpad is not working.  I currently have the Kernel version &lt;code&gt;4.15.0-42-generic&lt;/code&gt; installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The fix is in the Kernel version &lt;code&gt;4.19.0&lt;/code&gt; from &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/MainlineBuilds&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu's MainlineBuilds&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19/linux-headers-4.19.0-041900_4.19.0-041900.201810221809_all.deb&#xA;&#xA;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19/linux-headers-4.19.0-041900-generic_4.19.0-041900.201810221809_amd64.deb&#xA;&#xA;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19/linux-image-unsigned-4.19.0-041900-generic_4.19.0-041900.201810221809_amd64.deb&#xA;&#xA;http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.19/linux-modules-4.19.0-041900-generic_4.19.0-041900.201810221809_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Would there be any impact to me upgrading to a later kernel ??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="16786" LastEditorUserId="14940" LastEditDate="2019-01-02T23:27:10.877" LastActivityDate="2019-01-02T23:27:10.877" Title="Asus TUF FX504 Touchpad not working" Tags="|touchpad|drivers|kernel|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17615" PostTypeId="2" ParentId="17614" CreationDate="2018-12-21T21:06:04.187" Score="1" Body="&lt;p&gt;Yes there could be an impact but that doesn't mean a problem, you can always try&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if you found a problem, you can change to the previous and/or test another&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remember to choose the right version for your system and download all the required files&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I must quote this anyway:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;By default, Ubuntu systems run with the Ubuntu kernels provided by the&#xA;  Ubuntu repositories. However it is handy to be able to test with&#xA;  unmodified upstream kernels to help locate problems in Ubuntu kernel&#xA;  patches, or to confirm that upstream has fixed a specific issue. To&#xA;  this end we now offer select upstream kernel builds. These kernels are&#xA;  made from unmodified kernel source but using the Ubuntu kernel&#xA;  configuration files. These are then packaged as Ubuntu .deb files for&#xA;  simple installation, saving you the time of compiling kernels, and&#xA;  debugging build issues.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;These kernels are not supported and are not appropriate for production&#xA;  use.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/MainlineBuilds&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/MainlineBuilds&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-21T21:06:04.187" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17616" PostTypeId="1" AcceptedAnswerId="17617" CreationDate="2018-12-21T22:33:25.387" Score="0" ViewCount="1089" Body="&lt;p&gt;I have my pc dual booted(win10 &amp;amp; ubuntu) and I'd like to try Elementary OS. Can i somehow try it for one time without installing it(and obviously not removing anything from my current OSs) and then IF i like it proceed with installation?&lt;/p&gt;&#xA;" OwnerUserId="16647" LastEditorUserId="14940" LastEditDate="2019-01-02T23:24:18.273" LastActivityDate="2019-01-02T23:24:18.273" Title="Use without installing" Tags="|release-juno|live-installation|live-cd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17617" PostTypeId="2" ParentId="17616" CreationDate="2018-12-21T22:45:25.660" Score="1" Body="&lt;p&gt;Yes you can... just &lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;create an install drive&lt;/a&gt;, boot from it and choose where it says &quot;Try elementary OS without installing&quot; in the boot menu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And later, inside if you want to install it just execute where it says something like &quot;Install elementaryOS&quot;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Fragment of &lt;code&gt;grub.conf&lt;/code&gt; from &lt;code&gt;elementaryos-5.0-stable.20181016.iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;menuentry &quot;Try elementary OS without installing&quot; {&#xA;    set gfxpayload=keep&#xA;    linux   /casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---&#xA;    initrd  /casper/initrd.lz&#xA;}&#xA;menuentry &quot;Install elementary OS&quot; {&#xA;    set gfxpayload=keep&#xA;    linux   /casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---&#xA;    initrd  /casper/initrd.lz&#xA;}&#xA;menuentry &quot;OEM install (for manufacturers)&quot; {&#xA;    set gfxpayload=keep&#xA;    linux   /casper/vmlinuz  file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---&#xA;    initrd  /casper/initrd.lz&#xA;}&#xA;menuentry &quot;Check disc for defects&quot; {&#xA;    set gfxpayload=keep&#xA;    linux   /casper/vmlinuz  boot=casper integrity-check quiet splash ---&#xA;    initrd  /casper/initrd.lz&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-21T22:45:25.660" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17618" PostTypeId="1" CreationDate="2018-12-22T04:41:10.323" Score="7" ViewCount="651" Body="&lt;p&gt;After sometime of my desktop being suspended, if I wake up the machine, bluetooth is turned off. I need to plug a usb mouse to reenable bluetooth via the indicator and then I can use my devices as intended.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already have enabled and uncommented &lt;code&gt;AutoEnable&lt;/code&gt; under &lt;code&gt;Policy&lt;/code&gt; on &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on why or how can I fix this&lt;/p&gt;&#xA;" OwnerUserId="15005" LastEditorUserId="14940" LastEditDate="2019-01-01T17:18:48.453" LastActivityDate="2020-07-07T08:29:11.493" Title="Bluetooth Keeps Getting Turned Off at Wake up" Tags="|keyboard|bluetooth|mouse|suspend|usb|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17619" PostTypeId="2" ParentId="6685" CreationDate="2018-12-22T21:39:20.297" Score="0" Body="&lt;p&gt;I don't know if you're having the same problem as me, but the answer here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14985/second-monitor-doesnt-connect&quot;&gt;Second monitor doesn&amp;#39;t connect&lt;/a&gt; helped me.&lt;/p&gt;&#xA;" OwnerUserId="13869" LastActivityDate="2018-12-22T21:39:20.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17620" PostTypeId="1" CreationDate="2018-12-22T22:41:47.457" Score="0" ViewCount="260" Body="&lt;p&gt;Today and before have encountered unexpected shutdown. My laptop have a new battery, because the old one died, but this also happened to me with this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see that this happen to me when the system use 100% of the CPU using the turbo boost. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This are my specs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ro57w.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ro57w.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use the &lt;code&gt;indicator-cpufreq&lt;/code&gt; to set the system on battery saver but this gave a very bad performance and the conservative mode does not limit the maximum of the CPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also this does not happen to me on Windows 10 but I saw that windows limit to 60% the performance when its on battery. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it does not be overheating because I played video games recently on windows without problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can i do to limit the performance or to not have that shutdowns? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16798" LastEditorUserId="16827" LastEditDate="2019-01-02T23:26:02.860" LastActivityDate="2019-06-02T00:04:00.337" Title="Unexpected Shutdown" Tags="|laptop|shutdown|battery|performance|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17621" PostTypeId="2" ParentId="2652" CreationDate="2018-12-22T23:43:14.390" Score="2" Body="&lt;h2&gt;My Solution&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I edited the &lt;code&gt;/etc/default/grub&lt;/code&gt; file's command line parameters, so that it reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash radeon.modeset=0&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(your system's parameters may vary. Just look for the &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; value, and add &lt;code&gt;radeon.modeset=0&lt;/code&gt; to the end, before the close-quote)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Saving the file, running &lt;code&gt;sudo update-grub&lt;/code&gt; made this the default boot instruction. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good to know: setting &quot;&lt;code&gt;radeon.modeset=0&lt;/code&gt;&quot; disables any attempt by the Linux OS to use the GPU's hardware acceleration. I think this is what Suzamax meant when claiming that Linux is &quot;not going to work properly&quot; on these old Radeon iMacs. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would not say this makes Linux a bad choice for these old machines in general, however. I'm writing this on a 2010 iMac that Apple no longer &quot;supports&quot; with the latest MacOS or Safari. Basic usage had broken down, to the point where even ordinary web tasks like youtube videos were failing to load properly, due to outdated browsers with no modern HTML5 support. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short, losing graphics acceleration in a nearly decade-old machine is a fair trade-off. This computer is not going to be used for high-end gaming and video applications. &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Opinion&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Meanwhile, the core i3 CPU scores higher in Passmark than most brand new &quot;budget&quot; PC's available right now &lt;em&gt;(which also have no discrete GPU -- purchasing a new low-end laptop would mean the end-user gets the same lack of GPU graphics processing, but they'd also get LESS CPU speed and less RAM, and they'd have paid new money for the lower-utility product)&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.cpubenchmark.net/cpu.php?cpu=Intel+Core+i3-540+@+3.07GHz&amp;amp;id=738&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cpubenchmark.net/cpu.php?cpu=Intel+Core+i3-540+@+3.07GHz&amp;amp;id=738&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I always recommend keeping old machines with strong CPU's and SATA connectors (for SSD upgrade) in use, rather than prematurely turning them into e-waste. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To that end, Linux is WONDERFUL for these old iMacs, because it's not like anything else is going to run on them. Apple made sure of that. The only other place this machine was headed was a landfill.&lt;/p&gt;&#xA;" OwnerUserId="16799" LastEditorUserId="14940" LastEditDate="2019-01-02T23:21:45.253" LastActivityDate="2019-01-02T23:21:45.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17622" PostTypeId="2" ParentId="17620" CreationDate="2018-12-23T01:55:25.403" Score="1" Body="&lt;p&gt;Try installing tlp it's a must have for laptop power management, the default settings are great but it is also very customisable.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:linrunner/tlp&#xA;$ sudo apt-get update&#xA;$ sudo apt-get install tlp tlp-rdw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2018-12-23T01:55:25.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17624" PostTypeId="1" CreationDate="2018-12-23T05:51:14.943" Score="0" ViewCount="590" Body="&lt;p&gt;My laptop's screen blinks and can't enter the login screen, this happens when the laptop is suspended or locked, I think this is because I use the nvidia driver. is it here that can help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dell inspiron-3421 with Nvidia GT625M&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2020-02-04T11:00:10.997" LastActivityDate="2020-02-04T11:00:10.997" Title="Laptop Screen Blinks" Tags="|release-juno|graphic-drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17625" PostTypeId="1" CreationDate="2018-12-23T07:34:59.290" Score="0" ViewCount="67" Body="&lt;p&gt;CURRENTLY MY LAPTOP RUNNING ON ELEMENTARY os 0.4.1 LOKI. BUT IT'S NOT UPGRADING TO NEW VERSION AFTER CHECKING FOR UPDATE. ERROR REPORTED &quot;TOO FEW ITEMS TO PROCESS&quot;&#xA;Request to kindly help on the up gradation process&#xA;Ravishankar&lt;/p&gt;&#xA;" OwnerUserId="16804" LastActivityDate="2018-12-23T10:36:23.590" Title="Loki to Juno 5 upgrade failure" Tags="|updates|" AnswerCount="1" CommentCount="1" ClosedDate="2019-01-03T05:50:50.870" ContentLicense="CC BY-SA 4.0" />
  <row Id="17626" PostTypeId="2" ParentId="17625" CreationDate="2018-12-23T10:36:23.590" Score="2" Body="&lt;p&gt;You can't update from Loki to Juno. You'll need to do a fresh install with a Juno iso.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to backup your /home directory as well as your packages and ppas.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2018-12-23T10:36:23.590" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17627" PostTypeId="2" ParentId="17624" CreationDate="2018-12-23T12:33:47.170" Score="2" Body="&lt;p&gt;There's workaround on this link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter/issues/166#issuecomment-437144185&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/issues/166#issuecomment-437144185&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16372" LastActivityDate="2018-12-23T12:33:47.170" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17628" PostTypeId="1" AcceptedAnswerId="17629" CreationDate="2018-12-23T16:35:39.870" Score="0" ViewCount="614" Body="&lt;p&gt;I'm having some issues with the system font on my high-dpi display. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a 15.6&quot; 4K UHD (3840 x 2160) display, and despite having the font size in the Universal Access settings set to &quot;Larger&quot;, I still find the system font hard to read occasionally. Is there a way to scale this larger?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally, system icons don't appear to scale well -- ex, the network/Bluetooth/battery/notifications icons on the top of the display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Elementary 5.0 (Juno). &lt;/p&gt;&#xA;" OwnerUserId="16666" LastEditorUserId="16827" LastEditDate="2019-01-02T23:27:07.770" LastActivityDate="2019-01-02T23:27:07.770" Title="System font size is small in high DPI display" Tags="|display|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17629" PostTypeId="2" ParentId="17628" CreationDate="2018-12-23T16:50:03.003" Score="0" Body="&lt;p&gt;So, I found that setting the text-scaling-factor &lt;a href=&quot;https://askubuntu.com/questions/197828/how-to-find-and-change-the-screen-dpi/272172#272172&quot;&gt;as in this answer&lt;/a&gt; helped &lt;em&gt;a lot&lt;/em&gt; with my issues, including the application specific problems I was having. Didn't particularly fix the icon issues, tho. &lt;/p&gt;&#xA;" OwnerUserId="16666" LastActivityDate="2018-12-23T16:50:03.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17630" PostTypeId="1" CreationDate="2018-12-23T17:39:48.390" Score="2" ViewCount="653" Body="&lt;p&gt;When I was installing elementary OS i could connect to WiFi. This was when I was using a USB flash drive to hold the elementary image. I booted into the USB drive, connected to my WiFi, then clicked &quot;install&quot;. I chose &lt;code&gt;ext4&lt;/code&gt; for my file system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running on a base model Macbook Pro 2012 retina. Why is the WiFi not available after installing it in my laptop SSD? Also I opened terminal and typed &lt;code&gt;iwconfig&lt;/code&gt;, I get &quot;no wireless extensions&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using latest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. also posted on Reddit.&lt;/p&gt;&#xA;" OwnerUserId="16808" LastEditorUserId="14940" LastEditDate="2018-12-28T15:51:34.060" LastActivityDate="2019-11-16T15:33:53.333" Title="Macbook Pro 2012 WiFi card not supported?" Tags="|wifi|drivers|macbook|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17631" PostTypeId="1" AcceptedAnswerId="17883" CreationDate="2018-12-23T17:58:41.607" Score="0" ViewCount="1544" Body="&lt;p&gt;How can I disabled the automatic suspend in Elementary OS 0.5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems there is a very aggressive automatic suspend for laptops in Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Settings -&gt; Power -&gt; &quot;Suspend when inactive for&quot; set to &quot;Never&quot;. (both on plugged in and on battery option).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use the gnome tweaks and set to false the &quot;Suspend when dim closed.&quot; the same result... The laptop goes to suspend itself in 15 minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The TLP laptop library is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me this is very tricky. I used to use Ubuntu OS, but I never experienced this aggressive suspend problem.&lt;/p&gt;&#xA;" OwnerUserId="16809" LastActivityDate="2019-03-21T18:59:39.400" Title="How can I disable automatic suspend of laptop?" Tags="|suspend|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17632" PostTypeId="1" AcceptedAnswerId="17633" CreationDate="2018-12-23T19:02:15.343" Score="1" ViewCount="6387" Body="&lt;p&gt;I just tried:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But the answer is only about the Ubuntu version (16.04). I have no information about elementary OS version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason I want this information is in order to &lt;strong&gt;upgrade&lt;/strong&gt;, or not, to Ubuntu version 18. Is it safe or is it a risk for my &lt;strong&gt;elementary distribution&lt;/strong&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank You for your answers.&lt;/p&gt;&#xA;" OwnerUserId="16811" LastEditorUserId="68" LastEditDate="2018-12-25T23:05:22.770" LastActivityDate="2020-03-05T16:28:34.640" Title="How can I know which is my Elementary OS version?" Tags="|system|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17633" PostTypeId="2" ParentId="17632" CreationDate="2018-12-23T21:25:38.657" Score="3" Body="&lt;h2&gt;Answer&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;, tells you about Ubuntu 16.04 means you have &lt;strong&gt;elementary OS Loki&lt;/strong&gt; installed. Don't know why doesn't say Loki.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;elementary OS is a distribution on it's own based on Ubuntu, as Ubuntu is based on Debian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A Ubuntu system can be upgraded to another Ubuntu version because is a rolling release distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS is not a rolling release distribution, hence you can't upgrade between versions. You have to install from scratch each version. Now if elementary OS were a rolling release distribution, you only could be able to upgrade to another elementary OS version not to a Ubuntu version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can experiment with it and try, but you'll be breaking a lot of stuff along.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is like if you install Ubuntu 18.04 and then upgrade to Debian Sid, I don't believe you'll be able to do it cleanly nor expecting to have a stable system in the process. Is doable yes, but why you installed elementary then?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want Ubuntu, then install Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;My outputs&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lsb_release -a&#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.0 Juno&#xA;Release:    5.0&#xA;Codename:   juno&#xA;&#xA;$ lsb_release -au&#xA;No LSB modules are available.&#xA;Distributor ID: Ubuntu&#xA;Description:    Ubuntu 18.04 LTS&#xA;Release:    18.04&#xA;Codename:   bionic&#xA;&#xA;$ cat /etc/lsb-release &#xA;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=5.0&#xA;DISTRIB_CODENAME=juno&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS 5.0 Juno&quot;&#xA;&#xA;$ cat /etc/upstream-release/lsb-release &#xA;DISTRIB_ID=Ubuntu&#xA;DISTRIB_RELEASE=18.04&#xA;DISTRIB_CODENAME=bionic&#xA;DISTRIB_DESCRIPTION=&quot;Ubuntu 18.04 LTS&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-23T21:25:38.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17634" PostTypeId="2" ParentId="17632" CreationDate="2018-12-23T22:32:17.217" Score="3" Body="&lt;p&gt;The System Settings -&gt; About has detailed information about Elementary OS.&lt;br&gt;&#xA;Or you can also click on &lt;em&gt;Application&lt;/em&gt; from top left corner of your screen and search for &lt;em&gt;About&lt;/em&gt;. &lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="16827" LastEditDate="2018-12-25T21:05:27.490" LastActivityDate="2018-12-25T21:05:27.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17635" PostTypeId="1" CreationDate="2018-12-24T00:07:24.123" Score="2" ViewCount="45" Body="&lt;p&gt;I needed some help with the power options on Elementary OS Juno. In the power options I have selected that computer should never suspend and that only the monitor would turn off after 15mins.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No matter what it always suspends my computer after 40 or so minutes. I cant figure out how to solve this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am semi new to linux so please do not use crazy terminology otherwise I may not understand it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance everyone&lt;/p&gt;&#xA;" OwnerUserId="16813" LastActivityDate="2018-12-24T00:07:24.123" Title="Computer always Suspends when Its selected as Never" Tags="|suspend|power|release-juno|" AnswerCount="0" CommentCount="1" ClosedDate="2019-01-02T23:43:47.987" ContentLicense="CC BY-SA 4.0" />
  <row Id="17636" PostTypeId="1" CreationDate="2018-12-24T00:34:06.617" Score="2" ViewCount="141" Body="&lt;p&gt;I have Juno installed and if I try to play a Video in Epiphany it is just red and grey. if I play the same video in Chromium it works fine.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="14940" LastEditDate="2018-12-30T00:19:38.230" LastActivityDate="2024-02-24T20:04:45.513" Title="videos dont play in Epiphany" Tags="|release-juno|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17639" PostTypeId="1" CreationDate="2018-12-24T10:43:44.070" Score="0" ViewCount="541" Body="&lt;p&gt;I wanted to try the OS so I downloaded the latest version. But when it boots up, I noticed that my screen is split in two and the bottom half was stretched. Is there a fix for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using AMD Ryzen 2200g (iGPU). I did tried using it on a pc with AMD R7 gpu and it worked fine.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4YvNX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4YvNX.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16817" LastEditorUserId="14940" LastEditDate="2019-01-02T23:24:25.877" LastActivityDate="2019-06-02T05:01:55.157" Title="Any support for Ryzen 2200g iGPU?" Tags="|display|release-juno|graphic-drivers|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17640" PostTypeId="1" CreationDate="2018-12-24T15:38:00.690" Score="0" ViewCount="213" Body="&lt;p&gt;My name is Marco and I am a new fan of elementary OS (&lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;).&#xA;I installed it in an Asus Pro P550L. I have a problem with Bluetooth. I would like to activate it but I don't know how. Someone could help me? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16818" LastEditorUserId="14940" LastEditDate="2018-12-28T14:07:24.373" LastActivityDate="2018-12-29T08:20:01.603" Title="How could I activate Bluetooth in Juno? (Asus Pro P550L)" Tags="|release-juno|bluetooth|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17641" PostTypeId="1" AcceptedAnswerId="17642" CreationDate="2018-12-24T15:42:15.327" Score="-2" ViewCount="34" Body="&lt;p&gt;i'm rookie in Linux. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need hotkey to close the applications. Ctrl+W doesn't always work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16819" LastActivityDate="2018-12-24T16:01:42.227" Title="Hotkey to closing applications" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17642" PostTypeId="2" ParentId="17641" CreationDate="2018-12-24T16:01:42.227" Score="0" Body="&lt;p&gt;You should be able to close any application by pressing &lt;code&gt;Alt+F4&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2018-12-24T16:01:42.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17644" PostTypeId="2" ParentId="17639" CreationDate="2018-12-24T16:36:06.803" Score="1" Body="&lt;p&gt;It would be a good idea to install the latest MESA drivers, you could add the official repositories&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1º &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2º &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3º &lt;code&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4º &lt;code&gt;sudo apt update&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;5º &lt;code&gt;sudo apt dist-upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They work very well in my case, even in games. if u want privative drivers i have a video for install privative drivers: &lt;a href=&quot;https://youtu.be/_zDLT9wQHmU&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/_zDLT9wQHmU&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2018-12-24T16:44:46.830" LastActivityDate="2018-12-24T16:44:46.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17648" PostTypeId="1" CreationDate="2018-12-25T02:20:41.410" Score="1" ViewCount="98" Body="&lt;p&gt;I'm new to Linux and I did fresh install of elementary OS 5.0. Everything is working fine but the touchpad doesn't work and I don't have any idea on how to troubleshoot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like its detected&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ 2.4G Mouse                                id=9    [slave  pointer  (2)]&#xA;⎜   ↳ ETPS/2 Elantech Touchpad                  id=12   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ TOSHIBA Web Camera - HD: TOSHIB           id=10   [slave  keyboard (3)]&#xA;    ↳ AT Translated Set 2 keyboard              id=11   [slave  keyboard (3)]&#xA;    ↳ Toshiba input device                      id=13   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16823" LastEditorUserId="14940" LastEditDate="2018-12-28T13:51:56.240" LastActivityDate="2018-12-28T13:51:56.240" Title="my elantech touchpad doesn't work" Tags="|release-juno|touchpad|drivers|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17649" PostTypeId="1" CreationDate="2018-12-25T08:59:44.747" Score="0" ViewCount="272" Body="&lt;p&gt;I am working with Elementary Juno (4.15.0-43-generic on x86_64). Epiphany does not start anymore in the desktop and I get a segmentation fault while starting in the Terminal.&lt;/p&gt;&#xA;" OwnerUserId="3948" LastActivityDate="2019-05-25T18:03:00.763" Title="Epiphany does not start (seg fault)" Tags="|release-juno|epiphany|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17650" PostTypeId="1" AcceptedAnswerId="17651" CreationDate="2018-12-25T12:49:01.300" Score="4" ViewCount="222" Body="&lt;p&gt;I am new to elementary OS as well as Linux and command-line. I have learned that some users are not listed in the system user accounts. How can I view them? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerDisplayName="user16826" LastEditorUserId="16827" LastEditDate="2018-12-25T14:17:29.290" LastActivityDate="2018-12-25T14:17:29.290" Title="How to view all existing user of my system?" Tags="|system|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17651" PostTypeId="2" ParentId="17650" CreationDate="2018-12-25T12:55:02.170" Score="4" Body="&lt;p&gt;It is normal for your system to have some system users and system users are usually not listed in the user accounts under system settings. To check them execute the following command in terminal,  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cat /etc/passwd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you are currently logged in with the root account you can ignore the term &lt;code&gt;sudo&lt;/code&gt; which is used to give a user superuser permission. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-25T12:55:02.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17652" PostTypeId="1" AcceptedAnswerId="17660" CreationDate="2018-12-25T13:41:11.143" Score="4" ViewCount="88" Body="&lt;p&gt;I get this following when I try to install nokigiri,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Building native extensions.  This could take a while...&#xA;ERROR:  Error installing nokogiri:&#xA;ERROR: Failed to build gem native extension.&#xA;&#xA;    current directory: /var/lib/gems/2.4.0/gems/nokogiri-1.9.1/ext/nokogiri&#xA;/usr/bin/ruby2.4 -r ./siteconf20181224-15718-15hfw3z.rb extconf.rb&#xA;mkmf.rb can't find header files for ruby at /usr/lib/ruby/include/ruby.h&#xA;&#xA;extconf failed, exit code 1&#xA;&#xA;Gem files will remain installed in /var/lib/gems/2.4.0/gems/nokogiri-1.9.1 for inspection.&#xA;Results logged to /var/lib/gems/2.4.0/extensions/x86_64-linux/2.4.0/nokogiri-1.9.1/gem_make.out&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried installing &lt;code&gt;ruby-dev1&lt;/code&gt;, &lt;code&gt;zlib1g-dev&lt;/code&gt; and &lt;code&gt;liblzma-dev&lt;/code&gt;, didn't help. I also installed &lt;code&gt;build-essential patch&lt;/code&gt;, &lt;code&gt;ruby-dev&lt;/code&gt; version &lt;code&gt;2.0.0&lt;/code&gt;,&lt;code&gt;2.0.2&lt;/code&gt;,&lt;code&gt;2.0.3&lt;/code&gt; that also didn't help.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-13T07:31:45.847" LastActivityDate="2019-04-13T07:31:45.847" Title="Error installing nokogiri" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17654" PostTypeId="2" ParentId="11391" CreationDate="2018-12-25T16:57:45.923" Score="1" Body="&lt;p&gt;I was able to fix the problem by following the tutorial: &lt;a href=&quot;https://gist.github.com/2E0PGS/f63544f8abe69acc5caaa54f56efe52f&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/2E0PGS/f63544f8abe69acc5caaa54f56efe52f&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16829" LastActivityDate="2018-12-25T16:57:45.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17656" PostTypeId="2" ParentId="17632" CreationDate="2018-12-25T21:41:33.053" Score="1" Body="&lt;p&gt;You could use a more descriptive tool called &lt;code&gt;screenfetch&lt;/code&gt; that is working directly from the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't think it is installed by default, so you have to install it first by typing in to the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install screenfetch&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once installed type &lt;code&gt;screenfetch&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About upgrading elementary team has not implemented this option yet so upgrading from Loki to Juno would end up with lots of errors or even system failure. I'd recommend a clean installation.&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastEditorDisplayName="user16597" LastEditDate="2018-12-25T21:47:07.450" LastActivityDate="2018-12-25T21:47:07.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17657" PostTypeId="2" ParentId="17561" CreationDate="2018-12-25T23:27:40.757" Score="0" Body="&lt;p&gt;I'm not sure, but wasn't it there an option like rotation lock or something in System Setting under screen settings?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also could someone with more reputation convert this answer into a comment to the first answer please, thanks.&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2018-12-25T23:27:40.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17658" PostTypeId="1" AcceptedAnswerId="17696" CreationDate="2018-12-26T03:47:17.200" Score="0" ViewCount="528" Body="&lt;p&gt;I just noticed that the Bluetooth icon is missing in the tray icons and the Settings app. How can I get it back?&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2018-12-27T23:17:10.287" Title="Bluetooth missing in tray icons and Settings app in Juno?" Tags="|release-juno|bluetooth|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="17659" PostTypeId="1" CreationDate="2018-12-26T04:51:08.753" Score="0" ViewCount="1236" Body="&lt;p&gt;Hola que tal acabo de instalar Elementary OS Juno y no me reconoce la tarjeta inalámbrica de mi computadora, es una HP Probook 440 G5.&#xA;Y como puedo configurar el Touchpad, no me da la funcion de Clic Derecho?&#xA;Espero su amable asistencia, Saludos!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;English translation:&lt;/strong&gt; &#xA;Hello, I just installed Elementary OS Juno and it does not recognize my computer's wireless card, it's an HP Probook 440 G5. Also how can I configure the Touchpad?, because the Right Click function doesn't work. Thanks in advance, Regards&lt;/p&gt;&#xA;" OwnerUserId="16834" LastEditorUserId="14940" LastEditDate="2018-12-28T14:00:16.573" LastActivityDate="2024-01-02T16:08:16.070" Title="Driver Realtek RTL8821CE" Tags="|release-juno|touchpad|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17660" PostTypeId="2" ParentId="17652" CreationDate="2018-12-26T08:26:12.187" Score="3" Body="&lt;p&gt;Installing &lt;code&gt;ruby2.4-dev&lt;/code&gt; did the work. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T08:26:12.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17661" PostTypeId="2" ParentId="17640" CreationDate="2018-12-26T08:52:20.090" Score="1" Body="&lt;p&gt;Please execute this command in your terminal,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install switchboard-plug-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T08:52:20.090" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17662" PostTypeId="1" AcceptedAnswerId="17663" CreationDate="2018-12-26T09:05:42.877" Score="3" ViewCount="99" Body="&lt;p&gt;I have tried creating a user through command line with &lt;code&gt;sudo adduser user&lt;/code&gt; but when I log in using that user's credential I get some error saying user is not in &lt;em&gt;sudoers&lt;/em&gt; file. How can I add new user to &lt;em&gt;sudoers&lt;/em&gt; file? &lt;/p&gt;&#xA;" OwnerDisplayName="user16826" LastActivityDate="2018-12-26T09:15:21.113" Title="user is not in the sudoers file. This incident will be reported" Tags="|system|user|sudo|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-26T09:24:32.097" ContentLicense="CC BY-SA 4.0" />
  <row Id="17663" PostTypeId="2" ParentId="17662" CreationDate="2018-12-26T09:15:21.113" Score="4" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;How can I add new user to sudoers file?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you wish to create a user with sudo privilege, execute,   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo adduser --ingroup sudo &amp;lt;username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you wish to add an existing user, execute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -aG sudo &amp;lt;username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T09:15:21.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17665" PostTypeId="1" AcceptedAnswerId="17666" CreationDate="2018-12-26T10:56:46.877" Score="3" ViewCount="1059" Body="&lt;p&gt;Trying to install wpscan on my system. I have installed these following packages &lt;code&gt;libcurl4-openssl-dev libxml2 libxml2-dev libxslt1-dev ruby-dev build-essential libgmp-dev zlib1g-dev&lt;/code&gt;. I have downloaded wpscan from official github repository using git. Installed wpscan using bundler. Everything seems okay but when I try to run wpscan I get, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;trevor@elementary:~/wpscan$ ruby wpscan.rb&#xA;Traceback (most recent call last):&#xA;ruby: No such file or directory -- wpscan.rb (LoadError)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Gems that were in the test group were ignored during installation, can this be the reason? &lt;/p&gt;&#xA;" OwnerDisplayName="user16826" LastEditorUserId="16827" LastEditDate="2018-12-26T11:26:42.960" LastActivityDate="2018-12-26T11:26:42.960" Title="(LoadError) No such file or directory - wpscan" Tags="|software-installation|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17666" PostTypeId="2" ParentId="17665" CreationDate="2018-12-26T11:16:41.917" Score="3" Body="&lt;p&gt;Actually the things is nothing wrong here you can just run wpscan with &lt;code&gt;wpscan&lt;/code&gt;. And don't forget to run &lt;strong&gt;inside the wpscan folder&lt;/strong&gt;, unless you may get some other errors.&lt;br&gt;&#xA;Go ahead and try &lt;code&gt;wpscan --url &amp;lt;yourdomain.tld&amp;gt;&lt;/code&gt;, I believe it will work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For further query related to wpscan (i.e. how to hack a site) you can get help from &lt;a href=&quot;https://security.stackexchange.com/&quot;&gt;here&lt;/a&gt; as it is kind of off-topic for this site.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T11:16:41.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17667" PostTypeId="2" ParentId="16239" CreationDate="2018-12-26T12:01:20.013" Score="6" Body="&lt;p&gt;What version of elementary OS you are using?   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please try selecting your Language to &lt;code&gt;French(Canada)&lt;/code&gt; and then select layout &lt;code&gt;English(Canada)&lt;/code&gt; from Layout setting under Keyboard. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T12:01:20.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17668" PostTypeId="2" ParentId="17632" CreationDate="2018-12-26T14:58:01.883" Score="3" Body="&lt;p&gt;You can check it by clicking the power button from the top right corner of your computer and then 'About This Computer'.&lt;br&gt;&#xA;Or you can also click on Application from top left corner of your screen and search for About.&lt;br&gt;&#xA;Or check About from settings.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T14:58:01.883" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17670" PostTypeId="1" CreationDate="2018-12-26T17:11:25.637" Score="0" ViewCount="483" Body="&lt;p&gt;Does anyone know of a good tutorial for configuring elementaryOS with Yubikeys? I just bought a 2-pack of the Yubikey 5 NFC and would like to set up stuff like full disk encryption, lightdm login and FIDO U2F authentication support.&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2018-12-26T17:41:10.570" Title="Yubikey tutorial for elementaryOS" Tags="|greeter|full-disk-encryption|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17671" PostTypeId="2" ParentId="17670" CreationDate="2018-12-26T17:34:52.450" Score="0" Body="&lt;p&gt;&lt;strong&gt;Ubuntu Linux Login Guide - Challenge Response&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.yubico.com/support/solutions/articles/15000011355-ubuntu-linux-login-guide-challenge-response&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.yubico.com/support/solutions/articles/15000011355-ubuntu-linux-login-guide-challenge-response&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Enabling the Yubico PPA on Ubuntu&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.yubico.com/support/solutions/articles/15000010964-enabling-the-yubico-ppa-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.yubico.com/support/solutions/articles/15000010964-enabling-the-yubico-ppa-on-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Ubuntu Linux Login Guide - U2F&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.yubico.com/support/solutions/articles/15000011356-ubuntu-linux-login-guide-u2f&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.yubico.com/support/solutions/articles/15000011356-ubuntu-linux-login-guide-u2f&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Using Your U2F YubiKey with Linux&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.yubico.com/support/solutions/articles/15000006449-using-your-u2f-yubikey-with-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.yubico.com/support/solutions/articles/15000006449-using-your-u2f-yubikey-with-linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Ubuntu - Configure yubikey authentication on Linux&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=ac65PmlzTIw&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=ac65PmlzTIw&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;System wide two factor security Ubuntu&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=3p5Wo9KtpAk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=3p5Wo9KtpAk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Let me search it for you&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/results?search_query=yubikey+ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/results?search_query=yubikey+ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;About full disk encryption, you didn't ask for it just explained what you wanted to achieve. But is another different topic&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-26T17:34:52.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17672" PostTypeId="2" ParentId="17670" CreationDate="2018-12-26T17:35:44.010" Score="0" Body="&lt;p&gt;I believe these will help,&lt;br&gt;&#xA;1.  &lt;a href=&quot;https://launchpad.net/~yubico/+archive/ubuntu/stable&quot; rel=&quot;nofollow noreferrer&quot;&gt;Official PPA&lt;/a&gt;&lt;br&gt;&#xA;2. &lt;a href=&quot;https://www.linode.com/docs/security/authentication/how-to-use-yubikey-for-two-factor-ssh-authentication/&quot; rel=&quot;nofollow noreferrer&quot;&gt;YubiKey for Two-Factor Secure Shell Authentication&lt;/a&gt;  &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T17:35:44.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17673" PostTypeId="2" ParentId="17649" CreationDate="2018-12-26T17:39:49.073" Score="1" Body="&lt;p&gt;There's no way to debug a crash without a stack trace, so you should first get a stack trace for the crash, with debug symbols for every frame in the trace. Once you have a stack trace, you can &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;report it to the Epiphany developers&lt;/a&gt;. See &lt;a href=&quot;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&quot; rel=&quot;nofollow noreferrer&quot;&gt;these instructions&lt;/a&gt; for how to acquire a quality stacktrace. Unfortunately, this is a bit harder to do in elementary than in other distros, because you must manually identify and install the required debuginfo packages. You know you've succeeded when there are no more ??? frames in the trace. Please take the backtrace with &lt;code&gt;bt full&lt;/code&gt; rather than normal &lt;code&gt;bt&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that this answer applies to any crashing program, not just Epiphany.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2018-12-26T17:39:49.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17674" PostTypeId="2" ParentId="17670" CreationDate="2018-12-26T17:41:10.570" Score="2" Body="&lt;p&gt;I ended up collecting bits and pieces from a number of sites and checking it in as a README file in a Github repository: &lt;a href=&quot;https://github.com/carniz/ubuntu-yubikey-setup&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/carniz/ubuntu-yubikey-setup&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this can help someone else who wants to configure elementaryOS with Yubikeys.&lt;/p&gt;&#xA;" OwnerUserId="2881" LastActivityDate="2018-12-26T17:41:10.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17675" PostTypeId="1" CreationDate="2018-12-26T18:00:50.457" Score="0" ViewCount="1136" Body="&lt;p&gt;I connected an old HP 1018. The Printer is recognized, installed, but when I try to print, the documents stop in the printing pool. The system (5.0 Juno 64bit) flags them as printed while they're not. The files in the printing pool cannot be deleted either. The only way to stop this is to remove the printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a workaround?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16832" LastEditorUserId="14940" LastEditDate="2019-01-01T18:19:46.987" LastActivityDate="2021-01-23T11:08:24.297" Title="The Printer is recognized and installed but it does not print actually" Tags="|release-juno|drivers|printer|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17676" PostTypeId="2" ParentId="16239" CreationDate="2018-12-26T18:01:27.833" Score="5" Body="&lt;p&gt;Go to System Settings -&gt; Keyboard&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ io.elementary.switchboard keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Press the + (plus) button to add a new one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AMQ5f.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AMQ5f.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Select &lt;code&gt;French (Canada)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WTFei.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WTFei.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Select &lt;code&gt;English (Canada)&lt;/code&gt; variant&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zw5vi.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zw5vi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Github&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I wrote a report on this, it needs a redesign&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-keyboard/issues/201&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-keyboard/issues/201&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-26T18:24:33.700" LastActivityDate="2018-12-26T18:24:33.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17677" PostTypeId="2" ParentId="1007" CreationDate="2018-12-26T21:32:03.157" Score="3" Body="&lt;p&gt;This can be achieved very easily by executing the following command in terminal  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -aG sudo &amp;lt;username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-26T21:32:03.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17678" PostTypeId="2" ParentId="16747" CreationDate="2018-12-27T02:12:00.030" Score="0" Body="&lt;p&gt;If you are trying to connect though the wifi it might be the router's firewall blocking it.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-27T02:12:00.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17679" PostTypeId="2" ParentId="16162" CreationDate="2018-12-27T02:14:22.580" Score="1" Body="&lt;p&gt;you can find out what kernel you are using with the following command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo uname -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="14940" LastEditDate="2018-12-28T14:57:53.813" LastActivityDate="2018-12-28T14:57:53.813" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17680" PostTypeId="2" ParentId="16162" CreationDate="2018-12-27T02:21:46.053" Score="0" Body="&lt;p&gt;After a fresh installation today, Juno appears to run &lt;strong&gt;Mainline Kernel 4.15.0-36.39&lt;/strong&gt;. If you can at least boot into eOS Juno then you can actually run newer mainline kernels using &lt;strong&gt;UKUU (Ubuntu Kernel Update Utility)&lt;/strong&gt;. This utility has been a life saver for me because I have gotten plenty of brand new hardware that really only had good support in the newest kernel releases. If you would like to try it out then you can install UKUU on eOS Juno by running the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo apt-add-repository -y ppa:teejee2008/ppa&#xA;sudo apt update&#xA;sudo apt install ukuu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16840" LastEditorUserId="16840" LastEditDate="2018-12-28T17:35:49.763" LastActivityDate="2018-12-28T17:35:49.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17681" PostTypeId="1" CreationDate="2018-12-27T06:36:44.920" Score="0" ViewCount="870" Body="&lt;p&gt;How to install driver for AMD A10-8700P Radeon R6 graphic card?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-display                 &#xA;   description: VGA compatible controller&#xA;   product: Carrizo&#xA;   vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;   physical id: 1&#xA;   bus info: pci@0000:00:01.0&#xA;   version: c5&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;   configuration: driver=amdgpu latency=0&#xA;   resources: irq:49 memory:d0000000-dfffffff memory:f0800000-f0ffffff ioport:f000(size=256) memory:feb00000-feb3ffff memory:c0000-dffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16708" LastEditorUserId="14940" LastEditDate="2018-12-28T14:01:47.740" LastActivityDate="2019-01-27T15:01:35.320" Title="Install AMD A10-8700P Radeon R6 driver" Tags="|graphic-drivers|drivers|amd|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17684" PostTypeId="1" CreationDate="2018-12-27T10:43:25.983" Score="1" ViewCount="78" Body="&lt;p&gt;I installed a elementary OS on my notebook last week.&#xA;Everything works fine until the password saving for applications like Thunderbird or ownCloud desktop client. I never got this problem before. I installed seahorse today to manage my keyrings. After I created a new keyring and set it as default, Thunderbird and ownCloud are asking for my passwords every time. Do you know what to do? With Ubuntu I never got these problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help.&#xA;Timo.&lt;/p&gt;&#xA;" OwnerUserId="16843" LastEditorUserId="16827" LastEditDate="2019-01-02T23:21:51.490" LastActivityDate="2019-01-02T23:21:51.490" Title="Save passwords for applications not working" Tags="|security|thunderbird|keyring|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17688" PostTypeId="1" AcceptedAnswerId="17695" CreationDate="2018-12-27T14:35:00.737" Score="3" ViewCount="80" Body="&lt;p&gt;I am actually new to elementary OS and i wanted to contribute a wallpaper to elementary OS.&#xA;I have the image and here is it,  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aZHbQ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aZHbQ.jpg&quot; alt=&quot;here is the image created&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What to do next ?&lt;br&gt;&#xA;Actually i did just make the image and dropped it here.&lt;br&gt;&#xA;Do i need to make a license or contact elementary OS?&lt;br&gt;&#xA;Or what?&#xA;I am really confused.&#xA;If i need to edit anything tell me please.&#xA;Thanks.&#xA;Sorry for any misspells or mistakes.&lt;/p&gt;&#xA;" OwnerUserId="16846" LastEditorUserId="16827" LastEditDate="2019-04-13T08:54:41.233" LastActivityDate="2019-04-13T08:54:41.233" Title="Can I contribute a wallpaper to elementary OS?" Tags="|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17689" PostTypeId="1" CreationDate="2018-12-27T16:45:06.900" Score="1" ViewCount="81" Body="&lt;p&gt;I'm setting up a multiseat configuration on my desktop. I used &lt;code&gt;loginctl attach&lt;/code&gt; to allocate a graphics card and 3 usb dongles (for keyboard, mouse and headset) to my extra seat (named 'seat1').&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the GUI to create a new user to access the 2nd seat (System Settings&gt;User Accounts).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've got ssh set up with my desktop acting as server and laptop acting as client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's letting me use both concurrently, with all peripherals working correctly, however I'm getting no network access. My machine is connected to my home network via ethernet cable and was connecting correctly prior to setting up the multiseat config. Now neither seat is connecting to network and I can't even access the machine via ssh (which was working perfectly before).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've run &lt;code&gt;lshw -c network&lt;/code&gt; as sudo, which output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;*-network UNCLAIMED&#xA;    description: Ethernet controller&#xA;    product: I211 Gigabit Network Connection&#xA;    vendor: Intel Corporation&#xA;    physical id: 0&#xA;    bus info: pci@0000:08:00.0&#xA;    version: 03&#xA;    width: 32 bits&#xA;    clock: 33MHz&#xA;    capabilities: pm msi msix pciexpress cap_list&#xA;    configuration: latency=0&#xA;    resources: memory:ef500000-ef51ffff ioport:7000(size=32) memory:ef520000-ef523fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm not sure where I've gone wrong and I'm not sure what I should even try Googling. Any help would be much appreciated :)&lt;/p&gt;&#xA;" OwnerUserId="16849" LastEditorUserId="14940" LastEditDate="2018-12-30T00:18:36.967" LastActivityDate="2018-12-30T00:18:36.967" Title="Juno - no network connection (over ethernet) when using multiseat config" Tags="|release-juno|networking|internet|ethernet|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17690" PostTypeId="1" CreationDate="2018-12-27T18:41:48.187" Score="1" ViewCount="88" Body="&lt;p&gt;I have a fresh install of Elementary Juno on a Lenovo laptop with an HDMI port. If I plug in an HDMI cable -- doesn't matter if there's a signal down it or anything -- then my screen goes black and show an unreadable error. If I unplug the cable, I get the Elementary desktop again, but there's no OS UI (Applications and search in upper left, battery power/other icons in the right, dock, etc). I am able to pull up the terminal via keyboard shortcuts and do things from the shell normally. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;a- what the heck do I need to do to fix my HDMI port? I'd like to connect to an external monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b- how do I restart the desktop UI from the cli?&lt;/p&gt;&#xA;" OwnerUserId="16666" LastActivityDate="2018-12-27T18:41:48.187" Title="Juno Errors on HDMI input" Tags="|hdmi|input|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17691" PostTypeId="2" ParentId="10428" CreationDate="2018-12-27T18:56:39.357" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I usually don't go for the GUI option. But in this case, it was the quickiest.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Application menu and type or find Disks app.&lt;/li&gt;&#xA;&lt;li&gt;Find the SD card and click on the play button to mount its partition.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="130" LastActivityDate="2018-12-27T18:56:39.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17693" PostTypeId="1" CreationDate="2018-12-27T19:58:05.470" Score="2" ViewCount="168" Body="&lt;p&gt;Is there a &quot;hack&quot; to install all the loki apps I am missing out on juno in the appcenter, by perhaps installing an older version of the appcenter?&lt;/p&gt;&#xA;" OwnerUserId="16128" LastEditorUserId="16128" LastEditDate="2018-12-30T17:35:16.590" LastActivityDate="2019-04-23T10:41:26.830" Title="Hack to install elementary os apps from loki and - to juno" Tags="|appcenter|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17695" PostTypeId="2" ParentId="17688" CreationDate="2018-12-27T22:02:14.873" Score="3" Body="&lt;p&gt;Make a pull request on the relevant Github repo &lt;a href=&quot;https://github.com/elementary/wallpapers&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/wallpapers&lt;/a&gt;. I see plenty of user contributed wallpapers there.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;h2&gt;To submit a wallpaper&lt;/h2&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;p&gt;Make sure your wallpaper is openly-licensed and okay for commercial&#xA;  use&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Fork the project and add the wallpaper&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Add license info to the debian/copyright file&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Add artist exif metadata using command exiftool -artist=&quot;Vincent van&#xA;  Gogh&quot; The\ Starry\ Night.jpg&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Create a pull request.&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;p&gt;Very few pull requests will be accepted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16709" LastEditorUserId="14940" LastEditDate="2018-12-28T20:19:33.313" LastActivityDate="2018-12-28T20:19:33.313" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17696" PostTypeId="2" ParentId="17658" CreationDate="2018-12-27T23:17:10.287" Score="1" Body="&lt;p&gt;I figured it out!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I totally ruled this out because I didn't think it would be at all related but when I turned off my WiFi (because I moved to a wired connection) it disabled Bluetooth along with it. I enabled WiFi again and restarted and Bluetooth is back.&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2018-12-27T23:17:10.287" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17697" PostTypeId="1" AcceptedAnswerId="17698" CreationDate="2018-12-28T09:30:29.203" Score="2" ViewCount="463" Body="&lt;p&gt;I have elementary OS version loki installed on a computer. I want to upgrade it to juno . How do I get juno without losing the apps i have installed? &lt;/p&gt;&#xA;" OwnerUserId="16857" LastEditorUserId="16857" LastEditDate="2018-12-28T09:48:16.867" LastActivityDate="2018-12-28T09:56:42.437" Title="How to upgrade from loki to juno?" Tags="|release-juno|system|" AnswerCount="1" CommentCount="0" ClosedDate="2018-12-29T13:27:05.607" ContentLicense="CC BY-SA 4.0" />
  <row Id="17698" PostTypeId="2" ParentId="17697" CreationDate="2018-12-28T09:49:57.383" Score="2" Body="&lt;p&gt;The answer is no I am afraid, you will need to perform a clean install. Download Juno from here, &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io&lt;/a&gt;. Don't forget to backup your data.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2018-12-28T09:56:42.437" LastActivityDate="2018-12-28T09:56:42.437" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17699" PostTypeId="1" AcceptedAnswerId="17700" CreationDate="2018-12-28T11:35:27.353" Score="2" ViewCount="305" Body="&lt;p&gt;I have decided to install Juno. As it is new I thought to try it without installing it on my computer, i will have to backup lots of data so I thought lets see it at once. I installed it in virtual box. I just notice that my pen drive is not working. But we have this old one that works fine. Can anyone tell me whats hap penning here?&lt;/p&gt;&#xA;" OwnerUserId="16857" LastEditorUserId="16827" LastEditDate="2018-12-28T11:51:37.520" LastActivityDate="2018-12-28T11:51:37.520" Title="USB does not work on elementary OS (Juno) on virtual box" Tags="|system|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17700" PostTypeId="2" ParentId="17699" CreationDate="2018-12-28T11:49:15.660" Score="3" Body="&lt;p&gt;I think there's nothing wrong with elementary OS, the problem is with your Virtual Box instead. I am guessing your USB (not supported one) is USB 3 and the other one (old one) is USB 2. And you may don't have &lt;a href=&quot;https://download.virtualbox.org/virtualbox/6.0.0/Oracle_VM_VirtualBox_Extension_Pack-6.0.0.vbox-extpack&quot; rel=&quot;nofollow noreferrer&quot;&gt;virtual box extension pack&lt;/a&gt; installed.&lt;br&gt;&#xA;What is abnormal to me is, you are supposed to get some error if you haven't installed that when you created the machine. Let me know the results.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2018-12-28T11:49:15.660" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17701" PostTypeId="1" CreationDate="2018-12-28T13:57:47.263" Score="2" ViewCount="113" Body="&lt;p&gt;Not sure if this is a known bug or not for Juno, but I was wondering if this could get patched (it would seem like an easy fix). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I click on the applications menu with my mouse, then click on the app icon with my mouse, everything works as expected...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HOWEVER, when I type the name of the app and press enter, the application that opens IS NOT in focus, requiring me to Alt-Tab over to it first before I can begin typing/using it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While it seems like a tiny thing it really disrupts my workflow since I try to use the mouse as little as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd say its more of an oversight than anything, but is there any chance this can get fixed in the next patch? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just to clarify, clicking works, using the arrow keys works, but typing the name of the app and hitting 'enter' to open it will not bring it in focus when launched. &lt;/p&gt;&#xA;" OwnerUserId="16858" LastActivityDate="2018-12-28T13:57:47.263" Title="Application window focus on open" Tags="|applications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17702" PostTypeId="1" AcceptedAnswerId="17713" CreationDate="2018-12-28T15:02:24.393" Score="2" ViewCount="147" Body="&lt;p&gt;My system is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Quad-Core Intel® Core™ i5-6600K CPU @ 3.50GHz  &lt;/li&gt;&#xA;&lt;li&gt;NVIDIA Corporation GP104 [GeForce GTX 1070] (rev a1)  &lt;/li&gt;&#xA;&lt;li&gt;16.4 GB memory  &lt;/li&gt;&#xA;&lt;li&gt;233.7 GB storage  &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm using the latest &lt;code&gt;nvidia-driver-415&lt;/code&gt; driver from &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;, yet I can't even run &lt;code&gt;vlc&lt;/code&gt; 720p without it lagging.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was having zero issues less then a day ago on my system. I can't imagine anything changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just watch YouTube videos and build websites on my PC, everything I install is through a Vagrant VirtualBox&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So no modifications to the base system...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ran system for 30 minutes&#xA;Restart system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ran system again for 30 minutes&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on the 4th attempt.&#xA;System is working correctly again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe my ssd is failing.&lt;/p&gt;&#xA;" OwnerUserId="16859" LastEditorUserId="26" LastEditDate="2019-01-03T05:49:41.143" LastActivityDate="2019-01-03T05:49:41.143" Title="Up to date elementary OS is incredibly slow, whats wrong?" Tags="|system|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17703" PostTypeId="1" CreationDate="2018-12-28T15:22:30.217" Score="7" ViewCount="565" Body="&lt;p&gt;I have purchased a few apps from the Elementary AppCenter(&lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;). I recently had to do a clean install of the OS.  I reinstalled these apps but they want me to pay again.  I would just ignore this, but now those apps will not just update when I chose to run all updates.  I have to do each one, one at a time..all while it keeps insisting that I pay for it... again.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway for this new install to know that I have already paid for some of these apps and don't need to do it again?  If not, what are the plans to address this type of issue?&lt;/p&gt;&#xA;" OwnerUserId="3632" LastEditorUserId="16827" LastEditDate="2019-01-09T09:25:50.407" LastActivityDate="2019-01-09T09:25:50.407" Title="AppCenter Payments after reinstall" Tags="|applications|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17704" PostTypeId="1" AcceptedAnswerId="17705" CreationDate="2018-12-28T15:57:17.973" Score="3" ViewCount="317" Body="&lt;p&gt;I am new to elementary OS. I usually use windows. In windows we can create &lt;code&gt;batch&lt;/code&gt; file which can make several command run at command prompt by single click. How to do this in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="16860" LastEditorUserId="16827" LastEditDate="2018-12-28T16:04:22.783" LastActivityDate="2019-05-03T07:41:46.760" Title="How to run multiple command sequentially?" Tags="|system|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17705" PostTypeId="2" ParentId="17704" CreationDate="2018-12-28T16:03:46.470" Score="5" Body="&lt;p&gt;You can make shell scripts to achieve this. A shell script usually starts with &lt;code&gt;#!/bin/bash&lt;/code&gt;. Let's say you want to execute &lt;code&gt;sudo apt update&lt;/code&gt; and &lt;code&gt;ls&lt;/code&gt; but you don't want to type it every time. So a shell script for that is,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;sudo apt update&#xA;ls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save it with &quot;.sh&quot; extension and execute &lt;code&gt;sudo chmod +x file_name.sh&lt;/code&gt; to give the file executable permission. Then you can execute the script by &lt;code&gt;./file_name.sh&lt;/code&gt;.&lt;br&gt;&#xA;Take a look here, described well in this answer at &lt;a href=&quot;https://askubuntu.com/a/223698/907048&quot;&gt;askubuntu&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-05-03T07:41:46.760" LastActivityDate="2019-05-03T07:41:46.760" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17706" PostTypeId="1" CreationDate="2018-12-28T16:19:55.873" Score="0" ViewCount="83" Body="&lt;p&gt;I'm trying to ween myself from &quot;thick&quot; apps like Thunderbird. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Playing with the default mail program (on Juno) - does it not have a way to show the message raw source?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe there is a different email app I should look at?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6372" LastEditorUserId="16827" LastEditDate="2019-01-02T23:27:14.073" LastActivityDate="2019-01-02T23:27:14.073" Title="How to view email's source?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17707" PostTypeId="1" AcceptedAnswerId="17726" CreationDate="2018-12-28T20:20:04.650" Score="2" ViewCount="231" Body="&lt;p&gt;I want to enable ads in certain websites, but not globally, create an exception list of some sort for the ad blocker. Is that possible? Without checking and unchecking &quot;block ads&quot; in preferences, of course.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="14940" LastEditDate="2018-12-30T00:19:02.937" LastActivityDate="2019-07-27T16:29:51.817" Title="How to allow ads in some websites with Epiphany?" Tags="|release-juno|epiphany|web-browser|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17708" PostTypeId="2" ParentId="17707" CreationDate="2018-12-28T20:35:41.130" Score="0" Body="&lt;h2&gt;Since Epiphany 3.24 &lt;code&gt;filters.list&lt;/code&gt; file was removed (Thanks to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/10316/michael-c&quot;&gt;Michael C.&lt;/a&gt;). More &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/commit/3a5bfb106fc136ef087f91c08e573350932a1cf3&quot; rel=&quot;nofollow noreferrer&quot;&gt;Info&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;From &lt;a href=&quot;https://askubuntu.com/questions/470040/how-to-customize-or-debug-ad-blocking-on-gnome-web-epiphany-browser&quot;&gt;askubuntu@470040&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In the file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$HOME/.config/epiphany/adblock/filters.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;, you can set filter lists... one on each line and with &lt;code&gt;;&lt;/code&gt; at the end of each line&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-29T21:09:15.347" LastActivityDate="2018-12-29T21:09:15.347" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17710" PostTypeId="2" ParentId="17675" CreationDate="2018-12-29T02:32:56.203" Score="0" Body="&lt;p&gt;What's up? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to install &lt;code&gt;system-config-printer&lt;/code&gt; in your PC and configure your print by it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install system-config-printer &#xA;&#xA;system-config-printer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It works with me. This software recognized my print perfectly!&lt;/p&gt;&#xA;" OwnerUserId="13109" LastEditorUserId="16827" LastEditDate="2019-01-02T20:56:41.727" LastActivityDate="2019-01-02T20:56:41.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17711" PostTypeId="2" ParentId="17659" CreationDate="2018-12-29T02:46:54.277" Score="0" Body="&lt;p&gt;I have a notebook with a Realtek's wireless card. It's awful! I google this driver and find it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?f=90&amp;amp;t=273099&amp;amp;p=1501349#p1501349&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.linuxmint.com/viewtopic.php?f=90&amp;amp;t=273099&amp;amp;p=1501349#p1501349&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it helps. ;) &lt;/p&gt;&#xA;" OwnerUserId="13109" LastActivityDate="2018-12-29T02:46:54.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17712" PostTypeId="1" CreationDate="2018-12-29T02:54:02.460" Score="1" ViewCount="102" Body="&lt;p&gt;I want to turn off the history switch (security &amp;amp; privacy menu) through the command line. Is it possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following settings are set to false in gsettings if i disable it using the menu (gui), but the reverse doesn't happen (using gsettings):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gsettings set org.gnome.desktop.privacy remember-app-usage &quot;false&quot;&lt;br&gt;&#xA;  gsettings set org.gnome.desktop.privacy remember-recent-files &quot;false&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The switch seems to be related to zeitgeist because if i delete ~/.local/share/zeitgeist/ the switch turns on again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What about location service? Is there a way to disable it through terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastEditorUserId="5150" LastEditDate="2018-12-29T03:26:36.707" LastActivityDate="2018-12-29T03:26:36.707" Title="Is it possible to disable history (security &amp; privacy menu) through the command line? What about location services?" Tags="|pantheon-terminal|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17713" PostTypeId="2" ParentId="17702" CreationDate="2018-12-29T03:41:11.873" Score="1" Body="&lt;p&gt;I was going to suggest that this might be an SSD failing.&#xA;My laptop was going slow, locking up taking 2 or 3 goes to boot.&#xA;I found out my SSD was failing, replaced it with a new one and all is great.&#xA;Ps my SSD was 2 weeks old.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2018-12-29T03:41:11.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17716" PostTypeId="2" ParentId="17706" CreationDate="2018-12-29T10:12:24.960" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EDaGM.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EDaGM.gif&quot; alt=&quot;View mail source&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is quite easy: open the email you want to see the source of, and in the upper right corner click on the three vertical dots -&gt; View Source. It will open Code with the email's source loaded.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2018-12-29T10:12:24.960" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17717" PostTypeId="1" CreationDate="2018-12-29T10:47:39.397" Score="2" ViewCount="542" Body="&lt;p&gt;No more than two/three days ago, the icon for the File app (file manager) is no longer shown, and the icon with the wheen is shown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I recover the correct icon, someway?&lt;/p&gt;&#xA;" OwnerUserId="16765" LastEditorUserId="14940" LastEditDate="2019-01-01T18:46:49.643" LastActivityDate="2019-01-02T10:44:52.907" Title="Icon for File app no longer showing" Tags="|release-juno|pantheon-files|desktop|icons|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17718" PostTypeId="1" AcceptedAnswerId="17796" CreationDate="2018-12-29T12:49:02.277" Score="4" ViewCount="66" Body="&lt;p&gt;I had elementary OS Freya installed on my computer. Knowing that there's no official way to upgrade to Loki from Freya I decided upgrade it manually &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6744/direct-update-from-freya-to-loki&quot;&gt;this&lt;/a&gt; answer. I don't blame the answer posted in that thread. I may have done something wrong. I got ended with a broken system. When I power on I just see Dell logo, after that screen turns black. &lt;/p&gt;&#xA;" OwnerDisplayName="user16826" LastEditorUserId="16827" LastEditDate="2018-12-29T13:03:34.380" LastActivityDate="2019-01-03T14:51:03.897" Title="System broken due to faulty upgrade" Tags="|system-installation|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17719" PostTypeId="1" CreationDate="2018-12-29T14:10:29.750" Score="1" ViewCount="227" Body="&lt;p&gt;I'm used to quickly closing windows on i3wm and SwayWM, where I would just press &lt;kbd&gt;WIN&lt;/kbd&gt;+&lt;kbd&gt;SHIFT&lt;/kbd&gt;+&lt;kbd&gt;Q&lt;/kbd&gt;. I've already checked and there are no alternatives for elementary OS except &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt;, which is annoying since I have to press &lt;kbd&gt;FN&lt;/kbd&gt; as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the terminal command &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt; uses to close the currently highlighted window? I want to use that command in the Custom section of the Keyboard settings.&lt;/p&gt;&#xA;" OwnerDisplayName="user16868" LastEditorUserId="14940" LastEditDate="2018-12-29T16:22:33.227" LastActivityDate="2018-12-29T21:23:42.033" Title="Terminal command for closing program" Tags="|release-juno|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17721" PostTypeId="2" ParentId="17717" CreationDate="2018-12-29T17:04:35.160" Score="2" Body="&lt;p&gt;It looks like the icon name in the file &lt;code&gt;/usr/share/applications/io.elementary.files.desktop&lt;/code&gt; has been translated in some locales for some reason. If you are in a locale where the translation has changed the icon name (at present [ca] and [it]) then it will cause this problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will file an issue against the project.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="14940" LastEditDate="2019-01-01T18:47:27.437" LastActivityDate="2019-01-01T18:47:27.437" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17722" PostTypeId="2" ParentId="17719" CreationDate="2018-12-29T17:10:59.473" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I've already checked and there are no alternatives for elementary OS&#xA;  except &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Well that is the &quot;alternative&quot; if I see it from your point of view. But like KDE, GNOME and many others yours is the real alternative and a rarity of a non spoken rule to define &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt; as a way to close active windows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS's Pantheon we call it shortcut, you may keep calling it alternative&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I start to think where it came the idea of this shortcut (or alternative), I'll probably will have to go back to the 80's where a lot of Common User Access standards were written/defined and then Microsoft thought to use &lt;kbd&gt;F4&lt;/kbd&gt; better than &lt;kbd&gt;Q&lt;/kbd&gt; in case a non English speaker will use the shortcut (associated with Quit) or a DVORAK layout user who will not have the &lt;kbd&gt;Q&lt;/kbd&gt; up there&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you could check &lt;strong&gt;&lt;em&gt;System reserved shortcuts&lt;/em&gt;&lt;/strong&gt; for GNOME in &#xA;&lt;a href=&quot;https://developer.gnome.org/hig/stable/keyboard-input.html.en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.gnome.org/hig/stable/keyboard-input.html.en&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And for KDE you'll find them in &lt;a href=&quot;https://docs.kde.org/trunk5/en/applications/fundamentals/kbd.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.kde.org/trunk5/en/applications/fundamentals/kbd.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All of them using the &quot;alternative&quot;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I understand you want something like &lt;code&gt;XF86Close&lt;/code&gt;, a simple command. But doesn't work when I tested it.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;SOLUTION 1:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In terms of kill the current active window, isn't simple to achieve but you could do it by binding&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;xkill -id $(xprop -root | grep NET_ACTIVE_WINDOW\( | cut -d# -f2)&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;, to a key&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?pid=897968#p897968&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?pid=897968#p897968&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;SOLUTION 2:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xdotool key Alt+F4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install it: &lt;code&gt;sudo apt install xdotool&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;SOLUTION 3:&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ wmctrl -c :ACTIVE:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To install it: &lt;code&gt;sudo apt install wmctrl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;SOLUTION 4:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You could play with &lt;code&gt;xev&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the outputs and remap it (&lt;code&gt;/usr/share/X11/xkb/keycodes/evdev&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt; from &lt;code&gt;xev&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;KeyPress event, serial 38, synthetic NO, window 0x4a00001,&#xA;    root 0x6c6, subw 0x0, time 1732231, (-131,275), root:(500,652),&#xA;    state 0x10, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,&#xA;    XLookupString gives 0 bytes: &#xA;    XmbLookupString gives 0 bytes: &#xA;    XFilterEvent returns: False&#xA;&#xA;FocusOut event, serial 38, synthetic NO, window 0x4a00001,&#xA;    mode NotifyGrab, detail NotifyAncestor&#xA;&#xA;ClientMessage event, serial 38, synthetic YES, window 0x4a00001,&#xA;    message_type 0x132 (WM_PROTOCOLS), format 32, message 0x130 (WM_DELETE_WINDOW)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;More info about map them and the use of &lt;code&gt;xkb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/@damko/a-simple-humble-but-comprehensive-guide-to-xkb-for-linux-6f1ad5e13450&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@damko/a-simple-humble-but-comprehensive-guide-to-xkb-for-linux-6f1ad5e13450&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/347382/890782&quot;&gt;https://askubuntu.com/a/347382/890782&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-29T21:23:42.033" LastActivityDate="2018-12-29T21:23:42.033" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17723" PostTypeId="1" CreationDate="2018-12-29T17:50:09.587" Score="0" ViewCount="237" Body="&lt;p&gt;I am running Elementary OS on a chromebook (Asus c200). The performance is great, but I do not have sound, nor the &quot;function&quot; keys work as intended (reload, brightness, full screen, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a solution to this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've followed the this steps regarding the sound, but with no success:&#xA;&lt;a href=&quot;https://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="16869" LastActivityDate="2024-01-03T05:03:20.353" Title="Sound and keys on chromebook (Asus c200)" Tags="|keyboard|audio|asus|chromebook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17724" PostTypeId="2" ParentId="17703" CreationDate="2018-12-29T19:26:57.503" Score="5" Body="&lt;p&gt;There is a &lt;a href=&quot;https://github.com/elementary/appcenter/issues/306&quot; rel=&quot;noreferrer&quot;&gt;Github issue concerning this&lt;/a&gt; that's marked as resolved, but their use case doesn't cover reinstalls, which is a little curious given that ElementaryOS hasn't actually supported upgrades at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In lieu of that, I looked into how the AppCenter tracks &quot;paid for&quot; applications and how to restore them upon reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The DRM (if you want to call it that) for the &lt;em&gt;list of installed apps&lt;/em&gt; ElementaryOS uses is a hidden &lt;em&gt;settings&lt;/em&gt; variable on appcenter, which you can see on the commandline by running this. So for example, I bought/donated to webpin, and here I can see that via &lt;code&gt;gsettings&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings get io.elementary.appcenter.settings paid-apps&#xA;['com.github.artemanufrij.webpin']&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Suppose I paid also for &lt;a href=&quot;https://appcenter.elementary.io/com.github.davidmhewitt.clipped/&quot; rel=&quot;noreferrer&quot;&gt;Clipped&lt;/a&gt;, which I think I will today. (It's a great little app; I recommend it and am happy to donate to its development.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can tell from the above URL that Clipped's ID is &lt;code&gt;com.github.davidmhewitt.clipped&lt;/code&gt;, so I can add it to my list of &quot;paid for&quot; apps like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set io.elementary.appcenter.settings paid-apps &quot;['com.github.artemanufrij.webpin', 'com.github.davidmhewitt.clipped']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, that's how AppCenter stores its list of &quot;paid for&quot; apps. To restore that between installs, you could simply dump the output of &lt;code&gt;gsettings get io.elementary.appcenter.settings paid-apps&lt;/code&gt; to a file and email it to yourself, then restore it later. Or, you could backup your home directory's config files and restore those.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;: It's probably worth discussing that you could also use the aforementioned technique to &quot;trick&quot; the AppCenter into giving you free updates. But given that you can just use these things free anyway, that seems kind of silly. But if you're that determined to avoid paying $1 for a clipboard history app, probably no one is going to stop you.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2018-12-29T19:26:57.503" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17725" PostTypeId="2" ParentId="17723" CreationDate="2018-12-29T19:47:00.833" Score="0" Body="&lt;p&gt;This might work for you...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://www.fascinatingcaptain.com/projects/remap-keyboard-keys-for-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.fascinatingcaptain.com/projects/remap-keyboard-keys-for-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good Luck&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-29T19:47:00.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17726" PostTypeId="2" ParentId="17707" CreationDate="2018-12-29T20:17:59.093" Score="2" Body="&lt;p&gt;This has been requested several times, but unfortunately it's not currently possible. &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/issues/268&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.gnome.org/GNOME/epiphany/issues/268&lt;/a&gt; has been reported to add this functionality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May 2019 edit: this will be possible in Epiphany 3.34 using the security popover that appears when you click the address bar lock icon; various website permissions will be available to change there.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastEditorUserId="10316" LastEditDate="2019-05-13T02:30:06.240" LastActivityDate="2019-05-13T02:30:06.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17727" PostTypeId="1" AcceptedAnswerId="17744" CreationDate="2018-12-29T21:26:43.260" Score="2" ViewCount="396" Body="&lt;p&gt;Is there a way to shrink all Window title bars on Juno?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried making changes to &lt;code&gt;gtk.css&lt;/code&gt; and &lt;code&gt;app.css&lt;/code&gt; with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="16873" LastEditorUserId="14940" LastEditDate="2018-12-30T00:17:47.153" LastActivityDate="2018-12-31T13:54:58.687" Title="shrink Window title bar" Tags="|settings|release-juno|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17728" PostTypeId="1" AcceptedAnswerId="17729" CreationDate="2018-12-29T21:56:30.830" Score="0" ViewCount="168" Body="&lt;p&gt;Folks, I have the abovementionned laptop but the touchpad is not working. I did find &lt;a href=&quot;https://pcsupport.lenovo.com/de/en/products/laptops-and-netbooks/lenovo-v-series-laptops/v130-15ikb/downloads/ds503533&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;a corresponding driver for Windows&lt;/strong&gt;&lt;/a&gt; but not for Elementary. Do I have to build  my own kernel here (found &lt;a href=&quot;https://askubuntu.com/questions/1049787/lenovo-ideapad-330-touchpad-not-working/&quot;&gt;&lt;strong&gt;some pages&lt;/strong&gt;&lt;/a&gt; quoting that I need to add an entry to a source file)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using &lt;code&gt;Juno&lt;/code&gt; and the newer &lt;code&gt;4.20.generic&lt;/code&gt; kernel but to no avail.&lt;/p&gt;&#xA;" OwnerUserId="16874" LastEditorUserId="14940" LastEditDate="2018-12-29T23:22:35.190" LastActivityDate="2018-12-29T23:28:19.860" Title="Lenovo V130 Touchpad" Tags="|release-juno|touchpad|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17729" PostTypeId="2" ParentId="17728" CreationDate="2018-12-29T23:28:19.860" Score="2" Body="&lt;p&gt;Is a known issue on the kernel&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/kernel-package/+bug/1789252&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/kernel-package/+bug/1789252&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have three options:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Demand a good driver for the manufacturer (Lenovo/Elan)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Wait for the kernel devs to release one&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Help the devs (or become one) to release the driver&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Imagine a Windows without drivers, what you could do. Here at least you have people working in the solution to put it on the kernel, I suggest you to help them at least giving them info and logs if they require&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-29T23:28:19.860" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17731" PostTypeId="1" CreationDate="2018-12-30T13:12:51.560" Score="2" ViewCount="664" Body="&lt;p&gt;I'm totally new to elementary OS and Linux. I've decided to have a go at elementary as the OS for a new self build media PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm pretty chuffed that I've muddle along so far and got quite a few things working. One of the main requirements before ditching the idea and opting for Windows 10 was to get music sounding pretty good. On my previous media PC I used &lt;code&gt;Winamp&lt;/code&gt; set on full treble and bass preset equaliser and that's what I was trying to replicate. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I've done an adjusted copy &lt;code&gt;PulseAudio&lt;/code&gt; conf file and tweaked ALSA. I then experimented with importing &lt;code&gt;Winamp&lt;/code&gt; equaliser presets into Audacious. I then found out that I could use Wine and install some Windows stuff, so this is what I've done and installed &lt;code&gt;Winamp&lt;/code&gt; - and comparing &lt;code&gt;Audacious&lt;/code&gt; and &lt;code&gt;Wimanp&lt;/code&gt; next to each other then, once again, &lt;code&gt;Winamp&lt;/code&gt; just wins out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this is all at the very edge of my understanding anything about Linux. I installed Wine through AppCenter and it said in there that it was installed. But when I clicked on the &lt;code&gt;Winamp.exe&lt;/code&gt; then Wine was not there as the default program, nor was it in the list to chose from as an alternative program. So, I found out that I had to navigate to the &lt;code&gt;.exe&lt;/code&gt; folder using the terminal and then typing wine &lt;code&gt;winamp.exe&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, when I open &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; I keep getting this fetch error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu bionic Release' does not have a Release file. &#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default. &#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No matter how many times I hit Ignore it pops up again after a few seconds and it making &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; pretty much unusable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I correct for this error? Do I uninstall &lt;code&gt;Wine&lt;/code&gt; and have another go? Do I have to uninstall &lt;code&gt;Winamp&lt;/code&gt; first if I do? Please bear in mind I don't understand much of the jargon of Linux, and my knowledge of most things is still pretty much zero. I vaguely understand that a &lt;a href=&quot;/questions/tagged/ppa&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;ppa&amp;#39;&quot; rel=&quot;tag&quot;&gt;ppa&lt;/a&gt; is an online set of files that get updated and so elementary goes to check for updates every so often. Googling this error message so far implies that Wine should not even have worked, so I don't know what's going on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="16805" LastEditorUserId="16827" LastEditDate="2018-12-31T09:12:33.847" LastActivityDate="2019-04-22T14:01:50.363" Title="Wine update error" Tags="|updates|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17735" PostTypeId="2" ParentId="15413" CreationDate="2018-12-30T20:44:33.020" Score="0" Body="&lt;p&gt;For youtube videos you coud try using an extension called &lt;a href=&quot;https://github.com/erkserkserks/h264ify&quot; rel=&quot;nofollow noreferrer&quot;&gt;h264ify&lt;/a&gt;, and it works on both Firefox and Chrome browsers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What it does it makes youtube stream H.264 videos instead of VP8/VP9 videos; that being said, by default, youtube streams VP8/VP9 encoded video. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this can cause problems with less powerful machines because VP8/VP9 is not typically hardware accelerated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In contrast, H.264 is commonly hardware accelerated by GPUs, which usually means smoother video playback and reduced CPU usage. h264ify makes YouTube stream H.264 videos instead of VP8/VP9 videos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Github: &lt;a href=&quot;https://github.com/erkserkserks/h264ify&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/erkserkserks/h264ify&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2018-12-30T20:44:33.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17736" PostTypeId="2" ParentId="14496" CreationDate="2018-12-30T21:43:45.930" Score="0" Body="&lt;p&gt;If you're having trouble updating your system you could use the &lt;a href=&quot;https://askubuntu.com/questions/66195/what-is-a-tty-and-how-do-i-access-a-tty&quot;&gt;tty subsystem&lt;/a&gt; which is just like the usual terminal but without any graphical interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can access it by using &lt;code&gt;ctrl + alt + f1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can exit it by using &lt;code&gt;ctrl + alt + f7&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It'll ask you the username and password which will grant you access to the system itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is used many times especially to avoid crashes during updates resulting in system failures.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;code&gt;tty&lt;/code&gt; you can use the same commands used in a regular terminal for updates, such as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;sudo apt upgrade&#xA;&#xA;sudo apt dist-upgrade&#xA;&#xA;sudo apt full-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope my answer will help you.&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastEditorDisplayName="user16597" LastEditDate="2018-12-30T21:49:09.423" LastActivityDate="2018-12-30T21:49:09.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17737" PostTypeId="2" ParentId="17618" CreationDate="2018-12-30T21:58:44.487" Score="0" Body="&lt;p&gt;Allright, so I found this on the internet. I cannot test this on my own so I can't confirm it as a working solution but it seems to coincide with your issue. You could give it a try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/@overcode/fixing-bluetooth-in-ubuntu-pop-os-18-04-d4b8dbf7ddd6&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fixing Bluetooth in Ubuntu, Pop!_OS 18.04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2018-12-30T21:58:44.487" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17739" PostTypeId="2" ParentId="8123" CreationDate="2018-12-30T22:54:27.917" Score="0" Body="&lt;p&gt;I had to reduce the resolution of the screen to get it to come back. Scrolling didn't help.&lt;/p&gt;&#xA;" OwnerUserId="16884" LastActivityDate="2018-12-30T22:54:27.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17740" PostTypeId="1" AcceptedAnswerId="17825" CreationDate="2018-12-31T00:21:56.793" Score="0" ViewCount="528" Body="&lt;p&gt;I have a work computer with two 4k monitors and one 2k. I currently have to use Wayland with Ubuntu to get all the monitors to work. With Xorg I could only ever use two of the monitors. Not an expert with xrandr yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to use all three monitors with Elementary OS? The video card is an Intel HD 630.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you&lt;/p&gt;&#xA;" OwnerUserId="16873" LastActivityDate="2019-01-07T04:09:13.483" Title="Juno with multiple hires monitors" Tags="|display|xorg|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17741" PostTypeId="1" AcceptedAnswerId="17746" CreationDate="2018-12-31T09:14:45.757" Score="5" ViewCount="109" Body="&lt;p&gt;I have Ubuntu 18 installed in my computer. I want to installed elementary OS. I kind started liking it. But I have so many apps installed in the Ubuntu installation and I don't want to lose those. So is there any of turning my Ubuntu to elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="16867" LastActivityDate="2018-12-31T14:04:00.993" Title="Is it possible to turn Ubuntu to elementary OS?" Tags="|system-installation|system|" AnswerCount="1" CommentCount="0" ClosedDate="2019-01-02T23:35:19.203" ContentLicense="CC BY-SA 4.0" />
  <row Id="17742" PostTypeId="1" AcceptedAnswerId="17745" CreationDate="2018-12-31T11:35:25.370" Score="0" ViewCount="610" Body="&lt;p&gt;Powered up this morning to be greeted with the &lt;code&gt;GNU Grub screen version 2.02&lt;/code&gt;. I chose &lt;code&gt;+Advanced options&lt;/code&gt;, then &lt;code&gt;elementary, with Linux 4.15.0-43-generic (recovery mode)&lt;/code&gt;. After a long list of command lines, it ended with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda2: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. fsck exited with status code 4 done. Failure: File system check of the root filesystem failed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This happened two weeks ago and the tech I took it to was stumped - never seen anything like it before. He found a third &quot;hidden&quot; partial partition. (I run a MacBook Pro mid-2012)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He couldn't save any of my files since I first switched to elementary OS. Lost a week's worth of converting and organizing files. Had to reinstall from thumb drive.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is this something from in the first partition?&lt;/li&gt;&#xA;&lt;li&gt;Is this a problem with the &lt;code&gt;Libre Writer&lt;/code&gt; in the second partition?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;elementary OS had been running clean and fast up until this point. This is unacceptable. Help!&lt;/p&gt;&#xA;" OwnerUserId="16656" LastEditorUserId="16656" LastEditDate="2019-01-08T08:25:28.487" LastActivityDate="2019-01-08T08:25:28.487" Title="I just want elementary OS 5.0 Juno to work" Tags="|boot|release-juno|macbook|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17743" PostTypeId="2" ParentId="2650" CreationDate="2018-12-31T13:18:28.897" Score="0" Body="&lt;p&gt;&lt;code&gt;/var/lib/bluetooth/[MAC ADDRESS of adapter]/[MAC ADDRESS of remote device]/info&lt;/code&gt; file has &lt;strong&gt;Name&lt;/strong&gt; for the device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you can change device name in this file as you wish.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please, do not forget to restart of bluetooth demon after name change&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service bluetooth restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, it's not stable for me since some paring event make name return to original name. It's annoying and no idea under Bluez version 5.48 under Ubuntu 18.04&lt;/p&gt;&#xA;" OwnerUserId="16889" LastEditorUserId="14940" LastEditDate="2019-01-01T18:31:21.483" LastActivityDate="2019-01-01T18:31:21.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17744" PostTypeId="2" ParentId="17727" CreationDate="2018-12-31T13:41:03.920" Score="3" Body="&lt;p&gt;&lt;strong&gt;Install&lt;/strong&gt; &lt;code&gt;dconf&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install dconf-tools &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Open&lt;/strong&gt; it from the menu and then goto &lt;code&gt;/org/gnome/desktop/interface/text-scaling-factor&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wYLGU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wYLGU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;, and &lt;strong&gt;set&lt;/strong&gt; it to &lt;code&gt;1.44&lt;/code&gt; or &lt;code&gt;1.5&lt;/code&gt; on a 4k screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Everything looks very nice on a 4k screen now&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="16873" LastEditorUserId="14940" LastEditDate="2018-12-31T13:54:58.687" LastActivityDate="2018-12-31T13:54:58.687" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17745" PostTypeId="2" ParentId="17742" CreationDate="2018-12-31T13:45:21.830" Score="3" Body="&lt;p&gt;First that &quot;Tech Guy&quot; didn't knew a thing or is lying to you if he never saw a message like that. You can even Google it and you'll find dozens of articles about this, even your exact same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The message you saw was a notice from the system that an error on the disk was detected, so it wanted you to run a command manually &lt;code&gt;RUN fsck MANUALLY&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A fragment from &lt;code&gt;fsck&lt;/code&gt;'s manual&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DESCRIPTION&#xA;       fsck  is  used  to  check  and  optionally  repair  one  or more Linux filesystems.  filesys can be a device name (e.g.&#xA;       /dev/hdc1,  /dev/sdb2),  a  mount  point  (e.g.   /,  /usr,  /home),  or  an  ext2  label  or  UUID   specifier   (e.g.&#xA;       UUID=8868abf6-88c5-4a83-98b8-bfc24057f7bd or LABEL=root).  Normally, the fsck program will try to handle filesystems on&#xA;       different physical disk drives in parallel to reduce the total amount of time needed to check all of them.&#xA;&#xA;       If no filesystems are specified on the command line, and the -A option is not specified, fsck will default to  checking&#xA;       filesystems in /etc/fstab serially.  This is equivalent to the -As options.&#xA;&#xA;       The exit code returned by fsck is the sum of the following conditions:&#xA;&#xA;              0      No errors&#xA;              1      Filesystem errors corrected&#xA;              2      System should be rebooted&#xA;              4      Filesystem errors left uncorrected&#xA;              8      Operational error&#xA;              16     Usage or syntax error&#xA;              32     Checking canceled by user request&#xA;              128    Shared-library error&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Your exit code was 4, that meant &lt;code&gt;Filesystem errors left uncorrected&lt;/code&gt; and was on &lt;code&gt;/dev/sda2&lt;/code&gt; partition&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may ask why that happen. Well could be multiple reasons. One of them was probably that the system did not shutdown normally&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to tell you that probably you didn't lose anything, was your &quot;tech guy&quot; stupidity and ignorance that caused that. I can't confirm this 100% because you never tried to fix the disk with the tools in hand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And about the hidden partition, a &quot;tech guy&quot; should know that in a &lt;code&gt;GPT layout&lt;/code&gt; installation you will have a hidden partition used for recovery. Is part of the standard and doesn't have any ties with the system you choose to install. Probably that was that &quot;mysterious hidden partition&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see that this could happen also on Mac OS, almost identically because it's ties with Unix (same command &lt;code&gt;fsck&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.howtogeek.com/236978/how-to-repair-disk-and-file-system-problems-on-your-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/236978/how-to-repair-disk-and-file-system-problems-on-your-mac/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;Solution&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Follow what it says&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run &lt;code&gt;fsck /dev/sda2&lt;/code&gt; (Say yes to everything) or run &lt;code&gt;fsck -fy /dev/sda2&lt;/code&gt; (forcing and saying yes to all automatically)&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If the problem persists after you run &lt;code&gt;fsck&lt;/code&gt;, that could mean other things, but always go one step at a time.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;What you meant with &quot;Crapple kernel&quot;?&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-31T13:45:21.830" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17746" PostTypeId="2" ParentId="17741" CreationDate="2018-12-31T14:04:00.993" Score="2" Body="&lt;p&gt;You could, but will be painful and you'll probably lose time and data in the process. And definitively you'll break the system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is better to save &lt;code&gt;/home&lt;/code&gt; if you don't have it already in a separated mount point and then install elementary OS fresh. Create a list of the apps you use an want that way you can install them later and because you saved &lt;code&gt;/home&lt;/code&gt; you will have all the settings as before&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will comment that I could be give you some pointers on how to do it, but I will not because I find that you'll probably hate elementary and go back to Ubuntu. You deserve the full and proper experience&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-31T14:04:00.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17747" PostTypeId="2" ParentId="16564" CreationDate="2018-12-31T14:10:50.503" Score="2" Body="&lt;p&gt;Since you have not deployed a site and their are easier options out there. I recommend removing everything you have done thus far and selecting one of the two options below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Remove previous LAMP installs&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge mysql* apache* php*&#xA;sudo apt autoremove &amp;amp;&amp;amp; sudo apt autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Use tasksel to install LAMP&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install tasksel&#xA;sudo tasksel install lamp-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Firstly grab and install EE:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo wget -qO ee rt.cx/ee4 &amp;amp;&amp;amp; sudo bash ee&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now for a LEMP stack run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ee site create example.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For a Wordpress LEMP install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ee site create example.com --type=wp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16890" LastEditorUserId="16827" LastEditDate="2019-01-01T19:47:45.723" LastActivityDate="2019-01-01T19:47:45.723" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17748" PostTypeId="2" ParentId="17731" CreationDate="2018-12-31T14:14:32.177" Score="2" Body="&lt;p&gt;About the repository&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the following commands on a terminal window&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo add-apt-repository -r ppa:ubuntu-wine/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(removing the PPA &lt;code&gt;ppa:ubuntu-wine/ppa&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;wget https://dl.winehq.org/wine-builds/Release.key | sudo apt-key add -&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(downloading and adding to the system the GPG key of WineHQ's repository)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(adding &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt; WineHQ's repository)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(update &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt; Release/Package lists of the repositories)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt install wine-stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(install Wine using &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;If you get an error like &lt;code&gt;NO_PUBKEY 76F1A20FF987672F&lt;/code&gt; or &lt;code&gt;GPG Error&lt;/code&gt; try with:&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 76F1A20FF987672F&lt;/code&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;(This will download the GPG key from the a keyserver to &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;From: &lt;a href=&quot;https://launchpad.net/~ubuntu-wine/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~ubuntu-wine/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;!!! PLEASE NOTE THAT THIS REPOSITORY IS DEPRECATED !!!&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;In fact, it's double deprecated -- it was replaced by the Wine Builds PPA, which was then itself replaced.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;For more information, please see:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   https://www.winehq.org/pipermail/wine-devel/2017-March/117104.html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;The following commands can be used to add the new repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   wget https://dl.winehq.org/wine-builds/Release.key&#xA;   sudo apt-key add Release.key&#xA;   sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;One more thing, read this answer:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17075/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17075/14940&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h2&gt;About &lt;a href=&quot;/questions/tagged/apt&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;apt&amp;#39;&quot; rel=&quot;tag&quot;&gt;apt&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/apt-get-linux-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/apt-get-linux-guide/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: Nowadays we use &lt;code&gt;apt&lt;/code&gt; instead of &lt;code&gt;apt-get&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;apt&lt;/code&gt; is user oriented&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;apt-get&lt;/code&gt; low level command&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Sometimes you'll need to use those low level commands but for the majority of situations just stick with just &lt;code&gt;apt&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2018-12-31T16:04:46.753" LastActivityDate="2018-12-31T16:04:46.753" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="17749" PostTypeId="1" CreationDate="2018-12-31T14:58:15.603" Score="3" ViewCount="111" Body="&lt;p&gt;I can not turn on computer anymore. I tried to update my &lt;a href=&quot;/questions/tagged/release-loki&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-loki&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-loki&lt;/a&gt; to &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; manually. Something may have gone wrong. I just see a bunch of process starting and started but this hangs with, &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A start job is running for Hold until boot process finishes up.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Its been almost 2 hours like that.&#xA;Please help. How can I get back to the OS?&lt;/p&gt;&#xA;" OwnerUserId="16891" LastEditorUserId="16827" LastEditDate="2018-12-31T15:44:14.970" LastActivityDate="2019-04-30T20:24:28.830" Title="system doesn't start - hangs on a process" Tags="|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17751" PostTypeId="2" ParentId="9206" CreationDate="2018-12-31T21:11:36.997" Score="3" Body="&lt;p&gt;I came looking for a solution to showing the desktop in a single key press and the solution of mapping &lt;code&gt;wmctrl -k on&lt;/code&gt; to &lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; got the job done. Quite handy if you have a really funky conky monitoring configuration running on the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the above seems to be a half solution though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to restore the windows you were working on afterwards then you need another keypress for &lt;code&gt;wmctrl -k off&lt;/code&gt; to restore the applications. I mapped mine to &lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;SHIFT&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; for ease of memory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works like a charm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HTH&lt;/p&gt;&#xA;" OwnerUserId="6372" LastEditorUserId="16827" LastEditDate="2019-05-03T20:45:11.480" LastActivityDate="2019-05-03T20:45:11.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17752" PostTypeId="1" CreationDate="2018-12-31T21:19:59.630" Score="0" ViewCount="126" Body="&lt;p&gt;Complete Linux noob here. I'm learning things by having just having a go at things. I'm currently exploring customising the desktop and I'm trying to install Avant Window Navigator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've downloaded the file and have unpacked it and read the README - not that it made much sense.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;`The following packages are required to build Awn from source. Note that in most&#xA;distributions, you need both the library and development/header packages&#xA;installed in order for the build process to work correctly.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;GNU Make&lt;/li&gt;&#xA;&lt;li&gt;libdesktop-agnostic [1]_&lt;/li&gt;&#xA;&lt;li&gt;libwnck 2.22 or later&lt;/li&gt;&#xA;&lt;li&gt;libX11&lt;/li&gt;&#xA;&lt;li&gt;dbus-glib&lt;/li&gt;&#xA;&lt;li&gt;xdamage&lt;/li&gt;&#xA;&lt;li&gt;xcomposite&lt;/li&gt;&#xA;&lt;li&gt;xrender&lt;/li&gt;&#xA;&lt;li&gt;Python 2.5 or later&lt;/li&gt;&#xA;&lt;li&gt;PyGTK 2.12 or later&lt;/li&gt;&#xA;&lt;li&gt;pyxdg (also known as python-xdg)`&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I don't really know what a package is, or a library or a development/header package - but decided to give it a try anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went to the directory in the terminal and did &lt;code&gt;./configure&lt;/code&gt; and got the following message at the end&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;configure: error: &#xA;  Could not link test program to Python. Maybe the main Python library has been&#xA;  installed in some non-standard library path. If so, pass it to configure,&#xA;  via the LDFLAGS environment variable.&#xA;  Example: ./configure LDFLAGS=&quot;-L/usr/non-standard-path/python/lib&quot;&#xA;  ============================================================================&#xA;   ERROR!&#xA;   You probably have to install the development version of the Python package&#xA;   for your distribution.  The exact name of this package varies among them.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds like I need to install python, but when I tried &lt;code&gt;sudo apt-get install python&lt;/code&gt; it says version 2.7.15 is already installed, and this is a recent enough version. So does this mean it is in a non standard library path? How would I find out?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And how do I check for all the other things in the required packages list?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="16805" LastActivityDate="2019-01-30T23:01:10.210" Title="How to install Avant Window Navigator" Tags="|software-installation|python|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17753" PostTypeId="2" ParentId="9206" CreationDate="2018-12-31T22:19:30.110" Score="1" Body="&lt;p&gt;There's an &quot;elementary&quot; Solution for it (pun intended)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Keep pressed &lt;kbd&gt;CTRL&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;li&gt;Right Click anywhere over &lt;a href=&quot;/questions/tagged/plank&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;plank&amp;#39;&quot; rel=&quot;tag&quot;&gt;plank&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click on Preferences&lt;/li&gt;&#xA;&lt;li&gt;Click on &lt;code&gt;Docklets&lt;/code&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YjCFs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YjCFs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Drag the &lt;code&gt;Desktop&lt;/code&gt; icon into &lt;a href=&quot;/questions/tagged/plank&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;plank&amp;#39;&quot; rel=&quot;tag&quot;&gt;plank&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Profit&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Docklets&lt;/code&gt; in Spanish was translated as &lt;code&gt;Agregados&lt;/code&gt;, a really bad translation must say. Better to keep it as &lt;code&gt;Docklets&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-31T22:19:30.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17754" PostTypeId="2" ParentId="17752" CreationDate="2018-12-31T22:44:13.320" Score="1" Body="&lt;p&gt;After reading about the project I don't recommend you to install this. Is too old and hasn't been active for years.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still want to install it, I could hep you with your errors but probably you'll find plenty.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The development package of &lt;code&gt;python&lt;/code&gt; in elementary/Ubuntu is &lt;code&gt;python-dev&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install python-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For the other stuff let's start to get the essential&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install build-essential&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then what you need in the list&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libwnck22 libwnck-dev libx11-6 libx11-dev libdbus-glib-1-2 libdbus-glib-1-dev libxdamage1 libxdamage-dev libxcomposite1 libxcomposite-dev libxrender1 libxrender-dev python-gtk2 python-gtk2-dev python-xdg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I let to you find out how to get &lt;code&gt;libdesktop-agnostic&lt;/code&gt; installed, too old&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://github.com/p12tic/awn&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/p12tic/awn&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2018-12-31T22:44:13.320" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17755" PostTypeId="2" ParentId="6907" CreationDate="2019-01-01T05:10:06.983" Score="-1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mpINY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mpINY.png&quot; alt=&quot;![enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hyper-v quick create do well..&lt;/p&gt;&#xA;" OwnerUserId="16895" LastActivityDate="2019-01-01T05:10:06.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17756" PostTypeId="2" ParentId="17675" CreationDate="2019-01-01T12:55:01.660" Score="1" Body="&lt;p&gt;I've solved the problem with 'Hannah' which can download and install the (right) HP 1018 driver, among several others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the Test Print it appears to be the &quot;FOO2ZJS-.PPD&quot;, v1.1.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;You can install &lt;code&gt;hannah-foo2zjs&lt;/code&gt; running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install hannah-foo2zjs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ihfUH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ihfUH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://packages.ubuntu.com/bionic/hannah-foo2zjs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.ubuntu.com/bionic/hannah-foo2zjs&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16832" LastEditorUserId="14940" LastEditDate="2019-01-01T18:25:48.200" LastActivityDate="2019-01-01T18:25:48.200" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17757" PostTypeId="2" ParentId="17717" CreationDate="2019-01-01T13:39:51.050" Score="0" Body="&lt;p&gt;You could use the &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt; app from the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the &lt;code&gt;AppEditor&lt;/code&gt; search for your app click the icon and choose from available icons. See if that works.&lt;/p&gt;&#xA;" OwnerDisplayName="user16597" LastActivityDate="2019-01-01T13:39:51.050" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17758" PostTypeId="2" ParentId="16432" CreationDate="2019-01-01T13:42:03.437" Score="3" Body="&lt;p&gt;The same problem was &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10124/100&quot;&gt;solved for Loki previously&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You have to restart (or at least reload) Gala to change the wallpaper. To do that, you can type or paste the following into Terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall -HUP gala&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;-HUP&lt;/code&gt; flag tells the command to basically &quot;Hang-UP&quot; the gala process, which makes it restart.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2019-01-01T13:42:03.437" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17760" PostTypeId="1" CreationDate="2019-01-01T14:58:56.143" Score="1" ViewCount="1257" Body="&lt;p&gt;I dual boot elementary with Windows 10 on my laptop. When I was installing the OS, it let me choose how much space to get off of the Windows 10 drive but now that space is running low and I want to add more to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't fully let go of the Windows partitiont yet because I still have softwae that I require to use there that don't work in WINE.&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2024-01-06T08:08:41.023" Title="How to add more space to the elementary OS partition from the Windows one?" Tags="|release-juno|dual-boot|hardware|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17762" PostTypeId="2" ParentId="17760" CreationDate="2019-01-01T16:23:30.273" Score="0" Body="&lt;p&gt;I assume you already know what you have to do. You need to resize your partitions. You can do it from any end, either Windows or elementary OS. Please read these guides thoroughly, I believe you will have a clear idea.&lt;br&gt;&#xA;1. &lt;a href=&quot;https://askubuntu.com/questions/871825/add-more-disk-space-for-linux-from-windows-in-a-dual-bootable-machine&quot;&gt;Add more disk space for linux from windows in a dual bootable machine&lt;/a&gt;&lt;br&gt;&#xA;2. &lt;a href=&quot;https://askubuntu.com/questions/727112/give-more-hard-disk-space-to-ubuntu?noredirect=1&amp;amp;lq=1&quot;&gt;Give more Hard disk space to Ubuntu&lt;/a&gt;&lt;br&gt;&#xA;3. &lt;a href=&quot;http://joejanuszk.com/blog/increasing-ubuntu-partition-size-dual-boot-windows/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Increasing the Size of an Ubuntu Partition when Dual Booted with Windows 8&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S: Ignore the OS versions.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-01T16:23:30.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17764" PostTypeId="2" ParentId="17162" CreationDate="2019-01-01T18:17:10.860" Score="2" Body="&lt;p&gt;As defined earlier but never approved as answer here so I can't mark it as duplicate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This clearly should be the answer for that WiFi module&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;From:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/990571/890782&quot;&gt;https://askubuntu.com/a/990571/890782&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Getting the Driver&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the driver from &lt;a href=&quot;https://github.com/endlessm/linux/tree/master/drivers/net/wireless/rtl8821ce&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; by using the link below&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/endlessm/linux/tree/master/drivers/net/wireless/rtl8821ce&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://minhaskamal.github.io/DownGit/#/home?url=https://github.com/endlessm/linux/tree/master/drivers/net/wireless/rtl8821ce&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a terminal window and enter to the directory you downloaded the file, for example could be &lt;code&gt;$HOME/Downloads&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter the directory&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ cd ~/Downloads&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unzip the file, if you don't have the &lt;code&gt;unzip&lt;/code&gt; command just run &lt;code&gt;sudo apt install unzip&lt;/code&gt; and run the command again&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ unzip rtl8821ce.zip&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter the newly created directory&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ cd rtl8821ce&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;Preparation&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit the file &lt;code&gt;Makefile&lt;/code&gt; using any editor you want, here I'll be using nano (&lt;a href=&quot;https://wiki.gentoo.org/wiki/Nano/Basics_Guide&quot; rel=&quot;nofollow noreferrer&quot;&gt;nano Basics&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ nano Makefile&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now scroll down (around line 150) to a line that reads&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export TopDIR ?= $(srctree)/drivers/net/wireless/rtl8821ce&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;And change it to&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export TopDIR ?= $ ~/Downloads/rtl8821ce&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;em&gt;If you downloaded the file elsewhere in the start of the process just change &lt;code&gt;~/Downloads&lt;/code&gt; to the proper directory you are working on&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Save the file (in nano &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;O&lt;/kbd&gt; and then &lt;kbd&gt;ENTER&lt;/kbd&gt;) and close the editor (in nano &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Now we need to install some essentials to build in the system&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Run&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install build-essential&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After it we start to build the module we require&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;To Build and Install the Module&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Run the following commands:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ make&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Creates the module in the working dir&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ sudo make install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Installs the module in the system&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;$ sudo modprobe 8821ce&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Loads the module in the system&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Now you probably have a functioning WiFi driver and WiFi connection&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do Not delete the files of the driver you downloaded. You'll need them in the future.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As a future remainder, you'll have to do this every time you update the kernel (&lt;code&gt;linux-image&lt;/code&gt;) in your system. Maybe in the future the kernel will give you a functioning driver out of the box, but in case it won't just redo the steps but first you have to clean the directory you were working by using the command&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;$ cd ~/Downloads/rtl8821ce&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;$ make clean&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Then, as I said redo the commands to build the module for the new kernel&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ make&#xA;$ sudo make install&#xA;$ sudo modprobe 8821ce&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;ref:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17308/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17308/14940&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17711/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17711/14940&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?f=90&amp;amp;t=273099&amp;amp;p=1501349#p1501349&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.linuxmint.com/viewtopic.php?f=90&amp;amp;t=273099&amp;amp;p=1501349#p1501349&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2019-01-01T18:38:51.983" LastActivityDate="2019-01-01T18:38:51.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17767" PostTypeId="2" ParentId="17528" CreationDate="2019-01-01T18:35:43.113" Score="1" Body="&lt;p&gt;You should try a possible solution I wrote in detail based on &lt;a href=&quot;https://askubuntu.com/a/990571/890782&quot;&gt;https://askubuntu.com/a/990571/890782&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Check it out here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17764/14940&quot;&gt;https://elementaryos.stackexchange.com/a/17764/14940&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-01T18:35:43.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17769" PostTypeId="1" CreationDate="2019-01-01T21:36:27.743" Score="0" ViewCount="439" Body="&lt;p&gt;I just installed elementary on my Windows PC and I have problems with wireless network : the WIFI networks are not detected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/up2Rb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/up2Rb.png&quot; alt=&quot;network settings&quot;&gt;&lt;/a&gt;&#xA;You can see the wireless connexion is enabled, but it says it is disabled...&#xA;The available networks are detected in ~the 5 first minutes of uptime, and then... nothing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;me@mypc:~$ ip a | grep wlp&#xA;3: wlp3s0:  mtu 1500 qdisc mq state DOWN group default qlen 1000&#xA;    link/ether 40:9f:38:55:af:09 brd ff:ff:ff:ff:ff:ff&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here you can see that wlp3s0 is &quot;DOWN&quot;.&#xA;Can you help me to use my wireless network ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: My version of elementary is 5.0, and all packages are up-to-date.&#xA;My PC is an ASUS Vivobook 14 X405UA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &lt;code&gt;sudo lshw -sanitize -C network&lt;/code&gt; returns  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt; *-network                 &#xA;       description: Ethernet interface&#xA;       produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       fabriquant: Realtek Semiconductor Co., Ltd.&#xA;       identifiant matériel: 0&#xA;       information bus: pci@0000:02:00.0&#xA;       nom logique: enp2s0&#xA;       version: 15&#xA;       numéro de série: [REMOVED]&#xA;       taille: 1Gbit/s&#xA;       capacité: 1Gbit/s&#xA;       bits: 64 bits&#xA;       horloge: 33MHz&#xA;       fonctionnalités: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=[REMOVED] latency=0 link=yes multicast=yes port=MII speed=1Gbit/s&#xA;       ressources: irq:16 portE/S:e000(taille=256) mémoire:ef104000-ef104fff mémoire:ef100000-ef103fff&#xA;  *-generic&#xA;       description: Interface réseau sans fil&#xA;       produit: Illegal Vendor ID&#xA;       fabriquant: Illegal Vendor ID&#xA;       identifiant matériel: 0&#xA;       information bus: pci@0000:03:00.0&#xA;       nom logique: wlp3s0&#xA;       version: ff&#xA;       numéro de série: [REMOVED]&#xA;       bits: 32 bits&#xA;       horloge: 66MHz&#xA;       fonctionnalités: bus_master vga_palette cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=r8822be driverversion=4.15.0-43-generic firmware=N/A latency=255 link=no maxlatency=255 mingnt=255 multicast=yes wireless=IEEE 802.11&#xA;       ressources: irq:132 portE/S:d000(taille=256) mémoire:ef000000-ef00ffff&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;lspci&lt;/code&gt; returns these informations about my wireless interface :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device b822 (rev ff)&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;modinfo r8822be | grep parm&lt;/code&gt; returns&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;pre&gt;&#xA;parm:           debug_level:int&#xA;parm:           swenc:Set to 1 for software crypto (default 0)&#xA;parm:           ips:Set to 0 to not use link power save (default 1)&#xA;parm:           swlps:Set to 1 to use SW control power save (default 0)&#xA;parm:           fwlps:Set to 1 to use FW control power save (default 1)&#xA;parm:           msi:Set to 1 to use MSI interrupts mode (default 1)&#xA;parm:           dma64:Set to 1 to use DMA 64 (default 0)&#xA;parm:           aspm:Set to 1 to enable ASPM (default 1)&#xA;parm:           debug:Set debug level (0-5) (default 0)&#xA;parm:           debug_mask:Set debug mask (default 0) (ullong)&#xA;parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)&#xA;&lt;/pre&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16901" LastEditorUserId="16901" LastEditDate="2019-01-17T23:38:02.777" LastActivityDate="2019-01-17T23:38:02.777" Title="Problems with WIFI" Tags="|settings|release-juno|wifi|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17770" PostTypeId="2" ParentId="14706" CreationDate="2019-01-01T22:12:19.863" Score="1" Body="&lt;p&gt;Just disable the option where it says &lt;code&gt;Conceal Text&lt;/code&gt; (mine is in Spanish and says &lt;code&gt;Ofuscar Texto&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Conceal Text ON&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rk15V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rk15V.png&quot; alt=&quot;screenshot-tool-conceal-text-on&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Conceal Text OFF&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eR0gy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eR0gy.png&quot; alt=&quot;screenshot-tool-conceal-text-off&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-01T22:12:19.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17771" PostTypeId="1" CreationDate="2019-01-02T01:28:31.783" Score="2" ViewCount="8838" Body="&lt;p&gt;I just installed elementary OS 5.0 Juno on an &lt;strong&gt;Acer Aspire 5750Z&lt;/strong&gt;; nothing else is on the hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During installation, a popup indicated some &quot;WiFi networks available&quot; and that I could connect one after reboot using Network Manager. When I attempt to do that I don't see the WiFi network that was listed in the popup, and I am unsuccessful at adding it, with or without an Ethernet connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Philip Jones&lt;/p&gt;&#xA;" OwnerUserId="16904" LastEditorUserId="16827" LastEditDate="2019-01-09T09:23:08.560" LastActivityDate="2019-05-26T11:48:07.193" Title="No wireless network after installation of elementary OS Juno" Tags="|release-juno|wifi|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17772" PostTypeId="1" AcceptedAnswerId="17791" CreationDate="2019-01-02T10:39:42.170" Score="0" ViewCount="49" Body="&lt;p&gt;I need the maximize icon file of the default elementary theme. I'm working on a custom theme for Vivaldi, so that it looks more integrated, and this is the only one I can't find.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="16906" LastActivityDate="2019-01-03T11:24:19.427" Title="Where can I find the maximize icon file?" Tags="|themes|icons|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17773" PostTypeId="2" ParentId="17717" CreationDate="2019-01-02T10:44:52.907" Score="0" Body="&lt;p&gt;It's a translation error, as Jeremy said. To fix it, edit the file &lt;code&gt;/usr/share/applications/io.elementary.files.desktop&lt;/code&gt; as sudo (e.g. &lt;code&gt;sudo nano /usr/share/applications/io.elementary.files.desktop&lt;/code&gt; in the terminal). Look for the line that says &lt;code&gt;Icon[it]=gestore-di-file-di-sistema&lt;/code&gt; and replace it with &lt;code&gt;Icon[it]=system-file-manager&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same problem in Catalan and this fixed it. Hope it helps!&lt;/p&gt;&#xA;" OwnerUserId="16906" LastActivityDate="2019-01-02T10:44:52.907" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17774" PostTypeId="2" ParentId="17769" CreationDate="2019-01-02T13:56:18.280" Score="1" Body="&lt;p&gt;If one of the parameters is &lt;code&gt;aspm&lt;/code&gt;, when you run &lt;code&gt;$ modinfo r8822be | grep parm&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try, in a terminal window, running:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo modprobe -r r8822be&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo modprobe r8822be aspm=0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If it works to make it permanent just run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ echo &quot;options r8822be aspm=0&quot; | sudo tee -a /etc/modprobe.d/50-r8822be.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;The next time you reboot you won't have to execute any command&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2364383&amp;amp;page=4&amp;amp;p=13748692#post13748692&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2364383&amp;amp;page=4&amp;amp;p=13748692#post13748692&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/1085786/890782&quot;&gt;https://askubuntu.com/a/1085786/890782&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-02T13:56:18.280" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17775" PostTypeId="1" CreationDate="2019-01-02T14:15:35.870" Score="0" ViewCount="191" Body="&lt;p&gt;I have just moved from Ubuntu 18 to elementary OS OK. Wow, I definitely won't look back!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was using &lt;strong&gt;Flacon&lt;/strong&gt; (an audio .cue file splitter) on Ubuntu, but can't seem to be able to install it in elementary OS. Anyone has an idea? Or another similar program? &#xA;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="16827" LastEditDate="2019-05-07T09:05:36.647" LastActivityDate="2019-05-07T09:05:36.647" Title="Does anyone know how to install a program called Flacon on elementary OS?" Tags="|release-juno|audio|thirdpartyapps|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17776" PostTypeId="2" ParentId="17775" CreationDate="2019-01-02T14:25:05.577" Score="2" Body="&lt;p&gt;If it runs in Ubuntu 18.04 (Bionic) 99% will run on elementary OS Juno &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From their website, run to install it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:flacon&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When you add a PPA, &lt;code&gt;add-apt-repository&lt;/code&gt; runs &lt;code&gt;apt update&lt;/code&gt; after so you won't need to do it. If it does not, just run manually &lt;code&gt;sudo apt update&lt;/code&gt; and then install&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo apt install flacon&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://flacon.github.io/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flacon.github.io/download/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-02T14:25:05.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17777" PostTypeId="2" ParentId="17775" CreationDate="2019-01-02T14:28:17.040" Score="3" Body="&lt;p&gt;Thanks, the 'sudo add-apt-repository' command on its own was not working. &#xA;I found the answer: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:flacon&#xA;sudo apt-get update&#xA;sudo apt-get install flacon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Solved!&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2019-01-02T14:28:17.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17778" PostTypeId="2" ParentId="17771" CreationDate="2019-01-02T14:57:22.173" Score="3" Body="&lt;p&gt;This is your WiFi adapter&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Brand: Broadcom Limited&#xA;Model: BCM43227&#xA;PCI.ID: 14e4:4358&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;First, run (to start fresh)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt purge bcmwl-kernel-source&#xA;&#xA;$ sudo apt install linux-headers-generic dkms bcmwl-kernel-source&#xA;&#xA;$ sudo modprobe wl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't work continue...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;From &lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&quot;&gt;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;In some computers, before performing the commands, you will need to&#xA;  deactivate the Secure Boot Options in your BIOS. This applies for&#xA;  cases, for example, where the bcmwl-kernel-source is already installed&#xA;  but the driver does not yet work. You can do a reinstall like so, or&#xA;  disable Secure Boot by going to your BIOS Setup:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After you disable &lt;code&gt;Secure Boot&lt;/code&gt;, reinstall&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --reinstall bcmwl-kernel-source&#xA;&#xA;$ sudo modprobe wl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If nothing above works then we have to check the modules&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lsmod&#xA;$ grep -i blacklist /etc/modprobe.d/blacklist.conf:&#xA;$ cat /etc/modules&#xA;$ ls /etc/modprobe.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and paste the output editing your original question please, with that info I can tell you what command to run to blacklist some modules who are in conflict&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;brcmsmac&lt;/code&gt; and &lt;code&gt;bcma&lt;/code&gt; are loaded, then...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ printf &quot;# BCM43227 doesn't get detected\nblacklist brcmsmac\nblacklist bcma\n&quot; | sudo tee -a /etc/modprobe.d/blacklist.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit &lt;code&gt;/etc/modules&lt;/code&gt; (I'll use the text editor &lt;code&gt;nano&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo nano /etc/modules&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And remove &lt;code&gt;brcmsmac&lt;/code&gt; and &lt;code&gt;bcma&lt;/code&gt; from &lt;code&gt;/etc/modules&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if you don't have &lt;code&gt;wl&lt;/code&gt; in &lt;code&gt;/etc/modules&lt;/code&gt;, just add it in a new line and save the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2019-01-02T15:38:47.247" LastActivityDate="2019-01-02T15:38:47.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17780" PostTypeId="1" CreationDate="2019-01-02T18:03:35.633" Score="2" ViewCount="28" Body="&lt;p&gt;I'm using a qwerty keyboard with english layout but as a french speaker I would like to access special chars without changing the layout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To do so, I'd like to create an app that mimic the android behavior of longpress on a key:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Long pressing any alphabeticall key would launch a popup which would grab input focus&lt;/li&gt;&#xA;&lt;li&gt;It would show the list of variations of the letter you long pressed and you could select the one you want with the arrow key (or maybe by pressing the key again)&lt;/li&gt;&#xA;&lt;li&gt;Pressing enter would then give the focus back to the input text, send a 'Suppr' keyboard command to erase the original key pressed and paste the selected variation&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I started to read the Developper guide for elementary but as I never worked with Valaa nor Gtk+ I'm not sure it's the way to go.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this doable in Vala/Gtk?&lt;/p&gt;&#xA;" OwnerUserId="16914" LastActivityDate="2019-01-02T19:08:19.710" Title="Elementary app feasibility: modify any current text input" Tags="|gtk|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17781" PostTypeId="2" ParentId="17780" CreationDate="2019-01-02T19:08:19.710" Score="2" Body="&lt;p&gt;All feature requests must be written to the proper GitHub page, they do not belong here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe that in your case &lt;a href=&quot;/questions/tagged/gala&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;gala&amp;#39;&quot; rel=&quot;tag&quot;&gt;gala&lt;/a&gt; is a good starting point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/gala&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-02T19:08:19.710" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17782" PostTypeId="2" ParentId="17772" CreationDate="2019-01-02T19:22:39.323" Score="2" Body="&lt;p&gt;I know what you are looking for is another type of icons but I really don't know where to look. I tried to find them but nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a GitHub page where the normal icons are developed (not the kind you want/need). You could ask &lt;a href=&quot;https://github.com/elementary/icons/&quot; rel=&quot;nofollow noreferrer&quot;&gt;there&lt;/a&gt; and get a better answer than mine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/icons/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/icons/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry and good luck&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-02T19:22:39.323" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17783" PostTypeId="2" ParentId="13499" CreationDate="2019-01-02T20:05:54.443" Score="1" Body="&lt;p&gt;Just disable the option where it says &lt;code&gt;Conceal Text&lt;/code&gt; (mine is in Spanish and says &lt;code&gt;Ofuscar Texto&lt;/code&gt;). Should be a bug that kept the conceal after you used the tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Conceal Text ON&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rk15V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rk15V.png&quot; alt=&quot;screenshot-tool-conceal-text-on&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Conceal Text OFF&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eR0gy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eR0gy.png&quot; alt=&quot;screenshot-tool-conceal-text-off&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-02T20:05:54.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17784" PostTypeId="2" ParentId="17771" CreationDate="2019-01-02T22:26:06.330" Score="4" Body="&lt;p&gt;I had the same problem after I couldn't recover from a Window's 10 bad config issue and decided to go Linux for my desktops. I even installed it three times thinking I did something wrong.  Here's the fix that solved my problem...connect to a wired interface, open up a terminal and execute &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope that helps&lt;/p&gt;&#xA;" OwnerUserId="16915" LastEditorUserId="14940" LastEditDate="2019-01-02T23:35:54.437" LastActivityDate="2019-01-02T23:35:54.437" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17785" PostTypeId="1" CreationDate="2019-01-02T22:37:42.260" Score="1" ViewCount="2641" Body="&lt;p&gt;Sometimes I'm just sitting there and my laptop screen rotates, or when I get up and pick my laptop up from working on my couch and move to the kitchen table, it's now upside down.  I can fix it by turning the laptop on angle to rotate it as I need it, but how do I shut this off?&lt;/p&gt;&#xA;" OwnerUserId="16915" LastActivityDate="2021-01-10T10:48:47.627" Title="How do I stop the screen from rotating?" Tags="|display|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17786" PostTypeId="1" CreationDate="2019-01-03T02:00:06.393" Score="1" ViewCount="89" Body="&lt;p&gt;I am unable to set default application for images and text. I have to open files using 'open with' every time. E.g. Sublime is set as default for text files in settings, yet it asks for default application.&lt;/p&gt;&#xA;" OwnerUserId="16087" LastEditorUserId="14940" LastEditDate="2019-01-03T02:14:54.607" LastActivityDate="2019-02-02T03:02:40.600" Title="'Select as default' not working - Juno" Tags="|release-juno|pantheon-files|files|" AnswerCount="1" CommentCount="1" ClosedDate="2019-04-19T21:42:02.213" ContentLicense="CC BY-SA 4.0" />
  <row Id="17787" PostTypeId="2" ParentId="17786" CreationDate="2019-01-03T02:12:46.673" Score="1" Body="&lt;p&gt;Looks like a known bug and probably will be fixed soon&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/files/issues/836&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/836&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2019-01-03T02:12:46.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17788" PostTypeId="2" ParentId="9347" CreationDate="2019-01-03T09:11:56.993" Score="-1" Body="&lt;p&gt;I never had problems before but, in the last 6-7 days, the same problem appeared to me, too, once or two a day.&#xA;A reboot resolved the problem but sometimes, suddntly, the wi-fi totally desapperas, again. I'm using an HP latop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the last lines from from dmesg, after the problem just appeared (in this case opening Firefox with saved tabs just after login, but the problem usually happens after some hours of work):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[   47.188483] Code: 54 09 00 4d 85 e4 74 1e 49 8b 04 24 49 8b 7c 24 08 49 83 c4 18 48 89 de e8 e1 07 7c c4 49 8b 04 24 48 85 c0 75 e6 e9 51 ff ff ff &amp;lt;0f&amp;gt; 0b 5b 41 5c 5d c3 66 90 66 2e 0f 1f 84 00 00 00 00 00 0f 1f &#xA;[   47.188516] ---[ end trace 89da9a8786820492 ]---&#xA;[   47.285821] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm&#xA;[   47.285842] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210&#xA;[   47.303971] iwlwifi 0000:02:00.0: base HW address: 98:54:1b:a3:3e:ff&#xA;[   47.516290] iwlwifi 0000:02:00.0: Microcode SW error detected.  Restarting 0x2000000.&#xA;[   47.516432] iwlwifi 0000:02:00.0: Start IWL Error Log Dump:&#xA;[   47.516435] iwlwifi 0000:02:00.0: Status: 0x00000100, count: 6&#xA;[   47.516438] iwlwifi 0000:02:00.0: Loaded firmware version: 29.1044073957.0&#xA;[   47.516440] iwlwifi 0000:02:00.0: 0x00000034 | NMI_INTERRUPT_WDG           &#xA;[   47.516443] iwlwifi 0000:02:00.0: 0x000002F0 | trm_hw_status0&#xA;[   47.516445] iwlwifi 0000:02:00.0: 0x00000000 | trm_hw_status1&#xA;[   47.516447] iwlwifi 0000:02:00.0: 0x00041702 | branchlink2&#xA;[   47.516449] iwlwifi 0000:02:00.0: 0x00044696 | interruptlink1&#xA;[   47.516452] iwlwifi 0000:02:00.0: 0x0000C64A | interruptlink2&#xA;[   47.516454] iwlwifi 0000:02:00.0: 0x00000000 | data1&#xA;[   47.516456] iwlwifi 0000:02:00.0: 0x00000002 | data2&#xA;[   47.516459] iwlwifi 0000:02:00.0: 0x07030000 | data3&#xA;[   47.516461] iwlwifi 0000:02:00.0: 0x00000000 | beacon time&#xA;[   47.516463] iwlwifi 0000:02:00.0: 0x00035095 | tsf low&#xA;[   47.516466] iwlwifi 0000:02:00.0: 0x00000000 | tsf hi&#xA;[   47.516468] iwlwifi 0000:02:00.0: 0x00000000 | time gp1&#xA;[   47.516470] iwlwifi 0000:02:00.0: 0x00035095 | time gp2&#xA;[   47.516472] iwlwifi 0000:02:00.0: 0x00000009 | uCode revision type&#xA;[   47.516475] iwlwifi 0000:02:00.0: 0x0000001D | uCode version major&#xA;[   47.516477] iwlwifi 0000:02:00.0: 0x3E3B4DE5 | uCode version minor&#xA;[   47.516479] iwlwifi 0000:02:00.0: 0x00000210 | hw version&#xA;[   47.516482] iwlwifi 0000:02:00.0: 0x00C89200 | board version&#xA;[   47.516484] iwlwifi 0000:02:00.0: 0x0012016A | hcmd&#xA;[   47.516486] iwlwifi 0000:02:00.0: 0x02023080 | isr0&#xA;[   47.516489] iwlwifi 0000:02:00.0: 0x00000000 | isr1&#xA;[   47.516491] iwlwifi 0000:02:00.0: 0x00000002 | isr2&#xA;[   47.516493] iwlwifi 0000:02:00.0: 0x004000C0 | isr3&#xA;[   47.516495] iwlwifi 0000:02:00.0: 0x00000080 | isr4&#xA;[   47.516497] iwlwifi 0000:02:00.0: 0x0012016A | last cmd Id&#xA;[   47.516500] iwlwifi 0000:02:00.0: 0x00000000 | wait_event&#xA;[   47.516502] iwlwifi 0000:02:00.0: 0x00000080 | l2p_control&#xA;[   47.516504] iwlwifi 0000:02:00.0: 0x00000000 | l2p_duration&#xA;[   47.516506] iwlwifi 0000:02:00.0: 0x00000000 | l2p_mhvalid&#xA;[   47.516509] iwlwifi 0000:02:00.0: 0x00000000 | l2p_addr_match&#xA;[   47.516511] iwlwifi 0000:02:00.0: 0x00000007 | lmpm_pmg_sel&#xA;[   47.516514] iwlwifi 0000:02:00.0: 0x14031202 | timestamp&#xA;[   47.516516] iwlwifi 0000:02:00.0: 0x00341020 | flow_handler&#xA;[   47.516527] iwlwifi 0000:02:00.0: Failed to run INIT calibrations: -5&#xA;[   47.528118] iwlwifi 0000:02:00.0: Failed to run INIT ucode: -5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16765" LastActivityDate="2019-01-03T09:11:56.993" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17791" PostTypeId="2" ParentId="17772" CreationDate="2019-01-03T11:24:19.427" Score="2" Body="&lt;p&gt;I opened an issue on GitHub and Cassidy replied pointing me to the actions/symbolic folder of their icons repo: &lt;a href=&quot;https://github.com/elementary/icons/blob/master/actions/symbolic/window-maximize-symbolic.svg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/icons/blob/master/actions/symbolic/window-maximize-symbolic.svg&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The parent directory has the rest of window controls and other symbolic icons for actions.&lt;/p&gt;&#xA;" OwnerUserId="16906" LastActivityDate="2019-01-03T11:24:19.427" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17792" PostTypeId="2" ParentId="17785" CreationDate="2019-01-03T12:16:04.773" Score="1" Body="&lt;p&gt;Please follow these steps,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;At first, go to &lt;code&gt;System Settings&lt;/code&gt; and click &lt;code&gt;Displays&lt;/code&gt;. &lt;/li&gt;&#xA;&lt;li&gt;After that, click on the &lt;code&gt;gear&lt;/code&gt; icon on the top-right side and select &lt;code&gt;None&lt;/code&gt; from the drop down menu of &lt;code&gt;Screen Rotation&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;At the end, hit &lt;code&gt;Apply&lt;/code&gt; and you are done.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-03T12:16:04.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17793" PostTypeId="2" ParentId="15552" CreationDate="2019-01-03T12:59:03.947" Score="1" Body="&lt;p&gt;Please use this site to ask and answer things about &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS&lt;/a&gt;. If you have problem with Windows you can ask at &lt;a href=&quot;https://answers.microsoft.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;Microsoft Community&lt;/a&gt; where you can get helped by volunteers and as well as Microsoft support agents.&lt;br&gt;&#xA;About your question, I think installation of &lt;a href=&quot;https://download.virtualbox.org/virtualbox/6.0.0/Oracle_VM_VirtualBox_Extension_Pack-6.0.0.vbox-extpack&quot; rel=&quot;nofollow noreferrer&quot;&gt;VirtualBox Extension Pack&lt;/a&gt; is the solution to your problem.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-03T12:59:03.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17794" PostTypeId="1" AcceptedAnswerId="17795" CreationDate="2019-01-03T13:49:00.897" Score="3" ViewCount="1110" Body="&lt;p&gt;I just installed Juno and trying to open the app center and this thing popped out, how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to Fetch Update&#xA;&#xA;This may have been caused by external, manually added software repositories or a corrupted sources file.&#xA;&#xA;    E: http://packages.elementary.io/appcenter bionic/main amd64 Packages is not (yet) available (File has unexpected size (34849 != 35207). Mirror sync in progress? [IP: 104.28.4.44 80]&#xA;    Hashes of expected file:&#xA;     - Filesize:35207 [weak]&#xA;     - SHA256:d60095dd675259874ea62c6dc1c64d84dd687bc88e2eff9e675199a32a340e44&#xA;     - SHA1:e4891242386e767555495f17f9a413ca3f36a316 [weak]&#xA;     - MD5Sum:ed4f8383338719748b96e18b3444933b [weak]&#xA;    Release file created at: Thu, 03 Jan 2019 13:31:35 +0000&#xA;    )&#xA;    E: http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata is not (yet) available ()&#xA;    E: http://packages.elementary.io/appcenter bionic/main DEP-11 64x64 Icons is not (yet) available ()&#xA;    E: http://packages.elementary.io/appcenter bionic/main DEP-11 64x64@2 Icons is not (yet) available ()&#xA;    E: http://packages.elementary.io/appcenter bionic/main DEP-11 128x128 Icons is not (yet) available ()&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16922" LastEditorUserId="16827" LastEditDate="2019-01-04T08:30:15.220" LastActivityDate="2019-01-29T07:27:58.107" Title="&quot;Failed to Fetch Update&quot; error when opening app center on newly installed Juno" Tags="|release-juno|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17795" PostTypeId="2" ParentId="17794" CreationDate="2019-01-03T14:01:32.103" Score="4" Body="&lt;p&gt;I believe you have no network connection. Get a wired connection (Ethernet) and open &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;, it will be able to fetch updates.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Tip:&lt;/strong&gt; You may face problem with WiFi. If you do, click on the &lt;code&gt;Installed&lt;/code&gt; tab from &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; and install &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; driver by clicking &lt;code&gt;free&lt;/code&gt;. Your &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; will be working again. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-03T14:01:32.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17796" PostTypeId="2" ParentId="17718" CreationDate="2019-01-03T14:51:03.897" Score="1" Body="&lt;p&gt;Please perform a clean install. elementary OS has don't support rolling release like Ubuntu. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-03T14:51:03.897" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17797" PostTypeId="2" ParentId="16727" CreationDate="2019-01-03T14:59:00.353" Score="0" Body="&lt;p&gt;This issues can be fixed by upgrading the nvidia driver to version 410.&lt;/p&gt;&#xA;" OwnerUserId="2835" LastActivityDate="2019-01-03T14:59:00.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17798" PostTypeId="1" CreationDate="2019-01-03T19:56:52.027" Score="3" ViewCount="2542" Body="&lt;p&gt;Recently someone asked me to install elementary OS on their laptop, because they would like to get into Linux. I myself use Ubuntu and never had any problems installing it on my laptop/computer but here i ran into a problem, possibly not the OS's fault though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the laptop is a few years old and it came with Windows 10 preinstalled. When I start the install process I can connect to the internet, select keyboard layout and language but then a window pops up where I should select a partition to install elementary on it. I guess, because I cannot choose any partition, for ex: delete Windows 10 and replace it with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched online and I came to a basic conclusion that this is because of the hardrive (?) which is GPT not MBR. After running a terminal command it shows GPT is the default and MBR is &quot;protective&quot;, whatever that means. Sorry if this is not a professional way to say it, I've never encountered this before and anyway I just use Ubuntu on a simple daily basis, so I'm pretty new too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is, is there a way I can change something in the BOOT menu on the computer or should I run some commands in terminal to change it from GPT to MBR?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated, thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="16923" LastEditorUserId="16827" LastEditDate="2019-01-09T09:57:59.863" LastActivityDate="2019-08-15T13:03:50.567" Title="Can't install elementary due to GPT HDD" Tags="|system-installation|release-juno|hardware|disk-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17799" PostTypeId="1" AcceptedAnswerId="21931" CreationDate="2019-01-03T20:59:57.047" Score="3" ViewCount="976" Body="&lt;p&gt;I just got a recent Dell XPS 13 laptop. I'd like to install a Linux distro, but I have a requirement that I need hibernate to work. I've read that I need the swap partition to be at least 2x the size of the amount of RAM (so &gt;16GB). I find the UI for configuring the partitions in the installer quite confusing. Any help?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The installer is not giving me an option to change the partition sizes. 1GB is not enough for swap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No way to edit the partition table either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if I boot straight into the installer, it crashes on the partitioning even if I leave it alone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:P connected to my bluetooth headphones&lt;/p&gt;&#xA;" OwnerUserId="16924" LastEditorUserId="16924" LastEditDate="2019-01-04T00:38:38.787" LastActivityDate="2020-01-04T21:15:24.170" Title="How can I install Elementary OS with enough swap space to hibernate?" Tags="|system-installation|swap|" AnswerCount="1" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17800" PostTypeId="1" AcceptedAnswerId="17801" CreationDate="2019-01-04T09:06:47.997" Score="2" ViewCount="739" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4DwTA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4DwTA.png&quot; alt=&quot;This screen appeared but I can not press &amp;lt;ok&amp;gt;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I trying to do &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; and the screen says &lt;strong&gt;Package Configuration&lt;/strong&gt; and there is an &lt;kbd&gt;Ok&lt;/kbd&gt; in the bottom but i can not press it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="16922" LastEditorUserId="16827" LastEditDate="2019-01-04T09:35:43.917" LastActivityDate="2021-04-26T11:46:20.053" Title="'Package Configuration' screen but I unable to press &lt;ok&gt;" Tags="|updates|release-juno|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17801" PostTypeId="2" ParentId="17800" CreationDate="2019-01-04T09:32:40.067" Score="3" Body="&lt;p&gt;This is pretty simple. Please press &lt;kbd&gt;Tab&lt;/kbd&gt; from your keyboard, keep pressing until &lt;kbd&gt;Ok&lt;/kbd&gt; gets focus. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-04T09:32:40.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17802" PostTypeId="1" CreationDate="2019-01-04T10:38:30.980" Score="-2" ViewCount="147" Body="&lt;p&gt;Why does a 1gb file take so long to download? My download speed is fine so I see no reason for the download to take so long unless the servers are just bad? Is there no mirror that I can download from that isn't trash?  &lt;/p&gt;&#xA;" OwnerUserId="16926" LastActivityDate="2019-01-05T04:32:53.483" Title="Why does downloading the iso take so long?" Tags="|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17803" PostTypeId="1" CreationDate="2019-01-04T10:58:40.393" Score="2" ViewCount="542" Body="&lt;p&gt;I'm after getting some help to make a &lt;a href=&quot;/questions/tagged/bluetooth&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;bluetooth&amp;#39;&quot; rel=&quot;tag&quot;&gt;bluetooth&lt;/a&gt; keyboard work, I can't figure out how to get it to connect and stay connected so it will work to allow me to enter my password when switching the PC on. The bluetooth &lt;a href=&quot;/questions/tagged/mouse&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;mouse&amp;#39;&quot; rel=&quot;tag&quot;&gt;mouse&lt;/a&gt; works just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;user@pc:~$ bluetoothctl&#xA;[NEW] Controller 00:07:61:50:C8:24 BamBam2 [default]&#xA;[NEW] Device 00:07:61:4C:C8:3D Dell BT Mouse&#xA;[NEW] Device 00:07:61:4D:8A:81 Dell BT Keyboard&#xA;Agent registered&#xA;[Dell BT Mouse]# info 00:07:61:4D:8A:81&#xA;Device 00:07:61:4D:8A:81 (public)&#xA;    Name: Dell BT Keyboard&#xA;    Alias: Dell BT Keyboard&#xA;    Class: 0x00002540&#xA;    Icon: input-keyboard&#xA;    Paired: yes&#xA;    Trusted: yes&#xA;    Blocked: no&#xA;    Connected: no&#xA;    LegacyPairing: no&#xA;    UUID: Human Interface Device... (00001124-0000-1000-8000-00805f9b34fb)&#xA;    UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)&#xA;    Modalias: usb:v046DpB308d7312&#xA;[Dell BT Mouse]# connect 00:07:61:4D:8A:81&#xA;Attempting to connect to 00:07:61:4D:8A:81&#xA;Failed to connect: org.bluez.Error.Failed&#xA;[Dell BT Mouse]#&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I sometimes get a box that pops up that asks me to input a PIN. I don't know what the PIN is and the bluetooth &lt;a href=&quot;/questions/tagged/keyboard&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;keyboard&amp;#39;&quot; rel=&quot;tag&quot;&gt;keyboard&lt;/a&gt; won't type anything anyway. Sometimes it randomly connects, not sure why, but it loses the connection if I reboot. I have looked at the related questions but they have not helped.&lt;br&gt;&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="16805" LastEditorUserId="16827" LastEditDate="2019-01-04T12:19:52.820" LastActivityDate="2019-05-06T01:12:51.217" Title="Trouble connecting a bluetooth keyboard" Tags="|keyboard|bluetooth|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17804" PostTypeId="2" ParentId="16445" CreationDate="2019-01-04T11:04:38.257" Score="3" Body="&lt;p&gt;default integrated monitor is not always &lt;strong&gt;LVDS-1&lt;/strong&gt;&#xA;first you should get overview of detected displays and their aliases by command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr | grep &quot; connected &quot; | awk '{ print$1 }'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then cast&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output &amp;lt;here alias of your integrated monitor&amp;gt; --off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3069" LastEditorUserId="3069" LastEditDate="2019-01-04T15:34:05.420" LastActivityDate="2019-01-04T15:34:05.420" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17806" PostTypeId="1" CreationDate="2019-01-04T14:19:05.970" Score="4" ViewCount="465" Body="&lt;p&gt;&lt;strong&gt;Specs:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary OS 0.3.2 Freya 64-bit, Ubuntu 14.04&lt;/li&gt;&#xA;&lt;li&gt;Thunderbird 60.2.1 (64-bit)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;TLDR:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to change the date format of Thunderbird from &lt;code&gt;MM/dd/yyyy&lt;/code&gt; to &lt;code&gt;dd/MM/yyyy&lt;/code&gt;. I found out that in order to do that, I'd have to change my OS' locale, which I did, but that didn't update the date format in TB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Long Version:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been struggling now for probably three hours getting Thunderbird to show the correct date format (&lt;code&gt;dd/MM/yyyy HH:mm&lt;/code&gt;) to no avail. From my googling I found out that TB uses the OS locale and that I can change this by going to &lt;code&gt;System Settings &amp;gt; Language &amp;amp; Region&lt;/code&gt;. But that didn't work for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried that, I first changed the &lt;code&gt;Region&lt;/code&gt; to &quot;Australia&quot; (because there's not a &quot;South Africa&quot; option) and the &lt;code&gt;Formats&lt;/code&gt; to &quot;South Africa (English)&quot;, saw that the date preview was what I wanted, hit the &lt;code&gt;Set Language&lt;/code&gt; button and then restarted my PC. After rebooting, I noticed nothing had changed. The date/time display on the system's menu bar still showed &quot;Fri Jan 4 3:51 PM&quot;, even though the &lt;code&gt;Language &amp;amp; Region&lt;/code&gt; preview showed that it would be changed to &quot;Fri 04 Jan 2019 15:04&quot;, and the date format used in TB stayed exactly the same (&lt;code&gt;MM/dd/yyyy&lt;/code&gt;). The only change I could pick up was in Intellij Idea (2017.2.4), where the date format changed from &lt;code&gt;MM/dd/yyyy&lt;/code&gt; to &lt;code&gt;yyyy/MM/dd&lt;/code&gt; (which is still not quite what I want, but preferable to what it was). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next I went back to &lt;code&gt;Language &amp;amp; Region&lt;/code&gt;, updated the &lt;code&gt;Region&lt;/code&gt; to &quot;United Kingdom&quot;, left the &lt;code&gt;Formats&lt;/code&gt; option on &quot;South Africa (English)&quot; (preview still looking exactly how I want it to), this time hitting the &lt;code&gt;Set System Language&lt;/code&gt; button &lt;em&gt;before&lt;/em&gt; hitting the &lt;code&gt;Set Language&lt;/code&gt; button again, restarted my PC again, and lo and behold: Nothing changed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that I found the &lt;a href=&quot;https://www.thunderbird.net/en-US/thunderbird/60.0/releasenotes/&quot; rel=&quot;nofollow noreferrer&quot;&gt;release notes for TB 60.0&lt;/a&gt; which claims:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;An option under &quot;Tools &gt; Options, Advanced, General&quot; now allows to select whether date/time display will follow the application locale (adjusted by operating system's format settings for that locale) or the locale selected in the operating system's regional settings. In other words, an US English Thunderbird can use, for example, German formats.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I tried out the only check box available under that settings tab, but that also made no difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The very last piece of advice which I thought could solve my problem came from &lt;a href=&quot;https://askubuntu.com/a/168267/801500&quot;&gt;this&lt;/a&gt; answer, which suggests a TB addon that'd supposedly solve my problem, but in my case the addon is too old for my version of TB. Now I don't know what to do anymore. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone please help me set up the correct date format for TB (and preferably for the rest of my system too).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In light of @rolandw's answer, I investigated the locale settings via the terminal. When I first ran the &lt;code&gt;locale&lt;/code&gt; command I thought that this is clearly where my problem lies because, aside from &lt;code&gt;LANG&lt;/code&gt; and &lt;code&gt;LANGUAGE&lt;/code&gt;, all the other properties were set to &lt;code&gt;en_US.UTF-8&lt;/code&gt;. I then googled how to change these settings and found &lt;a href=&quot;https://www.thomas-krenn.com/en/wiki/Configure_Locales_in_Ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide which pointed out to me that my system's locale settings is also stored in &lt;code&gt;/etc/default/locale&lt;/code&gt;. But then it gets strange (IMO). When I &lt;code&gt;cat&lt;/code&gt;ed this file, it only showed about half the settings that the &lt;code&gt;locale&lt;/code&gt; command showed, and all of them were already set to &lt;code&gt;en_ZA.UTF-8&lt;/code&gt;. The guide also showed me that I can run &lt;code&gt;update-locale LC_&amp;lt;PROPERTY&amp;gt;=&amp;lt;VALUE&amp;gt;.UTF-8&lt;/code&gt;, so I ran it, setting &lt;code&gt;LC_COLLATE=en_ZA.UTF-8&lt;/code&gt;, because I saw this property when I ran &lt;code&gt;locale&lt;/code&gt; but not when I &lt;code&gt;cat&lt;/code&gt;ed &lt;code&gt;/etc/default/locale&lt;/code&gt;. After that I ran &lt;code&gt;locale&lt;/code&gt; again, which produced the exact same results. Then I restarted my PC, thinking that it needs a reboot to take effect. I ran &lt;code&gt;locale&lt;/code&gt; again, but everything is still the same (including &lt;code&gt;LC_COLLATE&lt;/code&gt;, which is set to &lt;code&gt;en_US.UTF-8&lt;/code&gt;). However, now if I &lt;code&gt;cat /etc/default/locale&lt;/code&gt;, &lt;code&gt;LC_COLLATE=en_ZA.UTF8&lt;/code&gt; shows up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are screenshots I took of this journey. The first screenshot shows everything before the restart (&lt;code&gt;locale&lt;/code&gt;, &lt;code&gt;cat /etc/default/locale&lt;/code&gt;, &lt;code&gt;update-locale LC_COLLATE=en_ZA.UTF8&lt;/code&gt;, &lt;code&gt;locale&lt;/code&gt;), as well as my &lt;code&gt;Language &amp;amp; Region&lt;/code&gt; settings. Note that I haven't even unlocked this window, just to show that the settings still are as I left them since originally asking this question. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OzYMN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OzYMN.png&quot; alt=&quot;Picture One&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This second picture shows what I did after the restart (&lt;code&gt;locale&lt;/code&gt;, &lt;code&gt;cat /etc/default/locale&lt;/code&gt;). Notice how &lt;code&gt;LC_COLLATE&lt;/code&gt; now shows up in &lt;code&gt;/ect/default/locale&lt;/code&gt;, which was not the case on the first screen shot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fDUrQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fDUrQ.png&quot; alt=&quot;Picture Two&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16929" LastEditorUserId="16929" LastEditDate="2019-01-10T06:16:19.503" LastActivityDate="2019-01-10T06:16:19.503" Title="Thunderbird - Incorrect date format used" Tags="|thunderbird|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17807" PostTypeId="2" ParentId="17806" CreationDate="2019-01-04T15:35:55.870" Score="0" Body="&lt;p&gt;I do not have &lt;code&gt;Thunderbird&lt;/code&gt; installed. However, I just tried to change date format to &lt;code&gt;dd/mm/yyyy&lt;/code&gt; and I see it is changed now.&lt;br&gt;&#xA; Please chose South Africa (as you want to) from drop down menu of Formats and leave Region to United States. After that set system language and reboot your system.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-04T15:35:55.870" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17808" PostTypeId="2" ParentId="16879" CreationDate="2019-01-04T17:02:18.683" Score="0" Body="&lt;p&gt;For a graphical method, both Telegram and Discord (and most apps) have a keyboard shortcut, &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Q&lt;/kbd&gt; (Q for Quit), that will close it completely. They also might (or might not) have a menu option, &lt;em&gt;File &gt; Quit&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the terminal, as another user said, you can also use the &lt;code&gt;killall&lt;/code&gt;, &lt;code&gt;pkill&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="16906" LastEditorUserId="16827" LastEditDate="2019-01-06T12:15:18.900" LastActivityDate="2019-01-06T12:15:18.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17809" PostTypeId="1" CreationDate="2019-01-04T23:29:47.230" Score="1" ViewCount="188" Body="&lt;p&gt;I know that Elementary has its own Headerbar style, but if you use any Gnome apps (as we all of course will), their headerbars often look flatly bad in Elementary, despite having nearly identical design language. Here for example is what Gnome Disk Utility looks like -- an essential app for most Linux users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dIcef.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dIcef.png&quot; alt=&quot;screenshot of ugly rendered headerbar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anything that can be done to make those apps look at least a little bit presentable?&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-02-05T15:02:00.483" Title="How do I make Gtk Headerbars look okay in Elementary?" Tags="|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17810" PostTypeId="2" ParentId="16281" CreationDate="2019-01-04T23:35:21.110" Score="3" Body="&lt;p&gt;There's an app called &lt;a href=&quot;https://appcenter.elementary.io/com.github.spheras.desktopfolder&quot; rel=&quot;nofollow noreferrer&quot;&gt;Desktop Folder&lt;/a&gt; that's available in the AppCenter. It adds desktop folders, among other things.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-04T23:35:21.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17811" PostTypeId="2" ParentId="17802" CreationDate="2019-01-05T04:32:53.483" Score="0" Body="&lt;p&gt;Some numbers would be helpful. You can try to download using torrents - here's a page with some &lt;a href=&quot;http://www.ubuntubuzz.com/2018/10/elementary-os-50-juno-released-download-iso-torrents.html?m=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;magnet links&lt;/a&gt;. (Verify checksums if you want)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively use a download accelerator that can open multiple connections e.g. IDM on Windows.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2019-01-05T04:32:53.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17812" PostTypeId="1" AcceptedAnswerId="17822" CreationDate="2019-01-05T12:02:05.467" Score="1" ViewCount="1915" Body="&lt;p&gt;The question says it all. I would like to configure the integrated terminal of Code (especially get rid of some lurid colours), but I can't find any option to do so, nor any configuration file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I configure the appearance of the terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="16935" LastEditorUserId="16939" LastEditDate="2019-01-07T10:51:42.887" LastActivityDate="2019-01-29T07:23:38.747" Title="How To Configure the Terminal in Code" Tags="|settings|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17813" PostTypeId="1" AcceptedAnswerId="17814" CreationDate="2019-01-05T17:23:29.593" Score="2" ViewCount="138" Body="&lt;p&gt;I installed release Juno recently. I used to have Manjaro before. &lt;code&gt;timedatectl set-local-rtc 1&lt;/code&gt; worked perfectly in Manjaro. It is not working in EOS. I am dual-booting with Windows 10.&lt;/p&gt;&#xA;" OwnerUserId="11883" LastActivityDate="2019-01-29T07:21:19.373" Title="Elementary OS Juno and Windows 10 dualboot time is wrong. RTC time is not changing to local" Tags="|release-juno|dual-boot|time|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17814" PostTypeId="2" ParentId="17813" CreationDate="2019-01-05T18:33:20.400" Score="4" Body="&lt;p&gt;Please execute this in your terminal, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;timedatectl set-local-rtc 1 --adjust-system-clock&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Do not worry if you see a warning after running &lt;code&gt;timedatectl&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-05T18:33:20.400" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17815" PostTypeId="2" ParentId="12388" CreationDate="2019-01-05T22:51:02.267" Score="1" Body="&lt;p&gt;I simply ran these commands and it works pretty well!  Nothing else was needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go root first by executing &lt;code&gt;sudo -i&lt;/code&gt; or &lt;code&gt;sudo su&lt;/code&gt; in the terminal and then execute the commands bellow,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo -e &quot;\n# applespi\napplespi\nspi_pxa2xx_platform\nspi_pxa2xx_pci&quot; &amp;gt;&amp;gt; /etc/initramfs-tools/modules&#xA;apt install dkms git&#xA;git clone https://github.com/cb22/macbook12-spi-driver.git /usr/src/applespi-0.1&#xA;dkms install -m applespi -v 0.1&#xA;shutdown -r now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16938" LastEditorUserId="16827" LastEditDate="2019-01-25T05:45:15.700" LastActivityDate="2019-01-25T05:45:15.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17816" PostTypeId="2" ParentId="9325" CreationDate="2019-01-05T22:58:56.523" Score="0" Body="&lt;p&gt;I simply ran these commands and it works pretty well!  Nothing else was needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go root first by executing &lt;code&gt;sudo -i&lt;/code&gt; or &lt;code&gt;sudo su&lt;/code&gt; in the terminal and then execute the commands bellow,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo -e &quot;\n# applespi\napplespi\nspi_pxa2xx_platform\nspi_pxa2xx_pci&quot; &amp;gt;&amp;gt; /etc/initramfs-tools/modules&#xA;apt install dkms git&#xA;git clone https://github.com/cb22/macbook12-spi-driver.git /usr/src/applespi-0.1&#xA;dkms install -m applespi -v 0.1&#xA;shutdown -r now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16938" LastEditorUserId="16827" LastEditDate="2019-01-25T05:45:43.863" LastActivityDate="2019-01-25T05:45:43.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17817" PostTypeId="1" AcceptedAnswerId="18798" CreationDate="2019-01-06T05:35:12.780" Score="2" ViewCount="783" Body="&lt;p&gt;I installed the snap version of Mailspring (using Snaptastic), but during install the &lt;code&gt;.desktop&lt;/code&gt; file for some reason wasn't copied to &lt;code&gt;/usr/share/applications/&lt;/code&gt; or &lt;code&gt;~/.local/share/applications/&lt;/code&gt; . I did that manually (to both locations) and now the icon is working and it's appearing in the Applications launcher, yet when I go to &lt;em&gt;System Settings -&gt; Applications&lt;/em&gt;, Mailspring isn't listed as an option under &quot;Email Client&quot;. How can I fix this so that &lt;code&gt;mailto:&lt;/code&gt; links go to Mailspring instead of Pantheon Mail?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried the &lt;code&gt;.deb&lt;/code&gt; version this worked flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wwukz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wwukz.png&quot; alt=&quot;Mailspring option missing from Email Client menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NSEQJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NSEQJ.png&quot; alt=&quot;Mailspring appears in applications launcher&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the contents of the .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Mailspring&#xA;Comment=The best email app for people and teams at work&#xA;GenericName=Mailspring&#xA;Exec=env BAMF_DESKTOP_FILE_HINT=/var/lib/snapd/desktop/applications/mailspring_mailspring.desktop /snap/bin/mailspring %U&#xA;Icon=/snap/mailspring/309/usr/share/pixmaps/mailspring.png&#xA;Type=Application&#xA;StartupNotify=true&#xA;StartupWMClass=Mailspring&#xA;Categories=GNOME;GTK;Network;Email;&#xA;Keywords=email;internet;&#xA;MimeType=x-scheme-handler/mailto;x-scheme-handler/mailspring;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16939" LastEditorUserId="16939" LastEditDate="2019-01-06T20:20:14.077" LastActivityDate="2019-04-23T10:36:49.440" Title="How to make Mailspring default mail app?" Tags="|settings|release-juno|pantheon-mail|switchboard|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17818" PostTypeId="2" ParentId="17809" CreationDate="2019-01-06T09:36:51.170" Score="-1" Body="&lt;p&gt;Well I had similar problem running &lt;code&gt;playonlinux&lt;/code&gt;. In that case you have a double head bar.&#xA;If you type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=0 name-of-application-to-launch-it&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=0 playonlinux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it is a workaround to have the good head bar design.&#xA;Not still a &quot;fix&quot; anyway. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this could work in your case as well. &lt;/p&gt;&#xA;" OwnerUserId="16941" LastEditorUserId="16827" LastEditDate="2019-01-06T14:11:38.440" LastActivityDate="2019-01-06T14:11:38.440" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17820" PostTypeId="1" CreationDate="2019-01-06T14:34:02.210" Score="1" ViewCount="1836" Body="&lt;p&gt;I am trying to install the latest version (5.0) on my late 2009 27“ iMac. It has a 2.66 i5 processor and an ATI Radeon HD 4850 GPU. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get my USB stick to boot I have to replace &quot;no splash&quot; with &quot;nomodeset&quot; and the install goes fine. However, when I try to boot the OS after installation I get a black screen and Grub doesn't appear at all so there is no way for me to make that same change to the boot options. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, &#xA;Chris&lt;/p&gt;&#xA;" OwnerUserId="16944" LastEditorUserId="16827" LastEditDate="2019-01-06T15:54:48.670" LastActivityDate="2019-10-12T16:59:41.333" Title="Black screen after installation on iMac" Tags="|system-installation|display|graphics|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17821" PostTypeId="2" ParentId="11032" CreationDate="2019-01-06T19:01:39.297" Score="0" Body="&lt;p&gt;This is the bug of Nouveau video driver (kernel extension). For details, check the bugs at &lt;a href=&quot;https://bugs.freedesktop.org/buglist.cgi?bug_status=__open__&amp;amp;content=SCHED_ERROR&amp;amp;list_id=663471&amp;amp;no_redirect=1&amp;amp;order=Importance&amp;amp;query_format=specific&quot; rel=&quot;nofollow noreferrer&quot;&gt;bugs.freedesktop.org&lt;/a&gt; or at &lt;a href=&quot;https://gitlab.freedesktop.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitLab&lt;/a&gt;, especially: &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=93629&quot; rel=&quot;nofollow noreferrer&quot;&gt;#93629&lt;/a&gt;, &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=99900&quot; rel=&quot;nofollow noreferrer&quot;&gt;#99900&lt;/a&gt; and &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=100567&quot; rel=&quot;nofollow noreferrer&quot;&gt;#100567&lt;/a&gt; (which are related to &lt;code&gt;SCHED_ERROR&lt;/code&gt;/&lt;code&gt;CTXSW_TIMEOUT&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more details, check: &lt;a href=&quot;https://askubuntu.com/q/874307/78223&quot;&gt;Ubuntu desktop hangs occasionally during regular use&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12803" LastActivityDate="2019-01-06T19:01:39.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17822" PostTypeId="2" ParentId="17812" CreationDate="2019-01-06T20:14:13.010" Score="4" Body="&lt;p&gt;The terminal plugin in Code follows the settings of the main Terminal application. To edit these settings:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Close Code and open Terminal.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt;, then close Terminal once the package is installed.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;em&gt;dconf Editor&lt;/em&gt; from the Applications menu. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Navigate to &lt;code&gt;/io/elementary/terminal/settings&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NpsWv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NpsWv.png&quot; alt=&quot;terminal settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can now edit any of these settings by clicking on them. If you're interested in changing the colors of the interface, you'll probably be most interested in &lt;em&gt;background&lt;/em&gt;, &lt;em&gt;foreground&lt;/em&gt;, and &lt;em&gt;palette&lt;/em&gt;. &lt;em&gt;Background&lt;/em&gt; is obviously the background color, &lt;em&gt;foreground&lt;/em&gt; is the main text color, and &lt;em&gt;palette&lt;/em&gt; is the colors of various other features (this might require some trial and error to figure out what each of them actually controls).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that to get these changes to update in the Code plugin, you may need to Disable it and Enable it again in Code's settings.&lt;/p&gt;&#xA;" OwnerUserId="16939" LastEditorUserId="16939" LastEditDate="2019-01-06T20:24:11.757" LastActivityDate="2019-01-06T20:24:11.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17823" PostTypeId="1" CreationDate="2019-01-06T20:21:26.343" Score="3" ViewCount="765" Body="&lt;p&gt;In my case it's Caprine (Facebook messenger app). In &lt;code&gt;caprine.desktop&lt;/code&gt; I added &lt;code&gt;X-GNOME-UsesNotifications=true&lt;/code&gt; and &lt;code&gt;Categories=GNOME;GTK;Network;Chat;&lt;/code&gt;, but I only get notifications in the notification center and bubble notifications, without a red badge like there is one in Mail or AppCenter. &lt;br/&gt;&#xA;This might be an answer, but I'm not sure if it still applies to Juno: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/123/how-do-i-enable-notification-badges-on-plank&quot;&gt;How do I enable notification badges on plank?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4168" LastEditorUserId="4168" LastEditDate="2019-01-06T20:45:53.910" LastActivityDate="2019-01-14T03:47:22.473" Title="How to get badge notifications on the dock icon for third-party apps?" Tags="|release-juno|plank|notifications|notification-badge|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17824" PostTypeId="1" AcceptedAnswerId="17894" CreationDate="2019-01-06T21:49:46.630" Score="3" ViewCount="806" Body="&lt;p&gt;I have a Brother MFC-7362N multi-function printer/scanner/copier on my local network. The Brother printer/scanner definitely works as I can print and scan from Windows and macOS on other machines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running Elementary OS 5.0 Juno on a Lenovo Thinkpad T430s.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the Linux install instructions from the Brother site &lt;a href=&quot;https://support.brother.com/g/s/id/linux/en/instruction_scn1b.html?c=au&amp;amp;lang=en&amp;amp;prod=mfc7362n_as&amp;amp;redirect=on&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. My device is listed as a &lt;code&gt;brscan4&lt;/code&gt; device. The final step in the list to confirm the installation indicates that installed correctly. I can ping the Brother printer/scanner from the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, &quot;Simple Scan&quot; says no device can be found. As does &lt;code&gt;scanimage&lt;/code&gt; when run from the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am very new to elementary OS, and to Linux, so I am not even sure what the next step is to try and diagnose the problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where should I be looking next to try and find out which part is missing/not configured correctly?&lt;/p&gt;&#xA;" OwnerUserId="16947" LastEditorUserId="16827" LastEditDate="2019-01-07T12:12:56.810" LastActivityDate="2019-01-29T07:19:09.050" Title="How can I get &quot;Simple Scan&quot; to see my Brother MFC-7362N network scanner?" Tags="|hardware|printer|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17825" PostTypeId="2" ParentId="17740" CreationDate="2019-01-07T00:30:55.677" Score="0" Body="&lt;p&gt;Was able to get the multip display with two 4k and one 2k monitor to work by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1. sudo add-apt-repository ppa:ubuntu-x-swat/updates&#xA;2. sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will upgrade Mesa to the latest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I was using an Intel HD 630 GPU I also did the below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;code&gt;/usr/share/X11/xorg.conf.d&lt;/code&gt; create the file &lt;code&gt;20-intel.conf&lt;/code&gt; with the below contents.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Section &quot;Device&quot;&#xA;  Identifier  &quot;Intel Graphics&quot;&#xA;  Driver      &quot;intel&quot;&#xA; EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Not completely sure if the &lt;code&gt;20-intel.conf&lt;/code&gt; file is needed. But my multi-hdpi monitor setup is now working perfectly.&lt;/p&gt;&#xA;" OwnerUserId="16873" LastEditorUserId="16873" LastEditDate="2019-01-07T04:09:13.483" LastActivityDate="2019-01-07T04:09:13.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17827" PostTypeId="1" CreationDate="2019-01-07T09:29:29.210" Score="1" ViewCount="37" Body="&lt;p&gt;I can change the volume 'steplessly' by dragging the slider, for instance in settings, but when using media keys there is a step size. For my preference, the step size is too big and my preferred volume is often in between steps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't been able to find a setting to change the step size, for instance I've looked for the &lt;code&gt;volume-step&lt;/code&gt; option in dconf editor, but it doesn't exist (anymore). Is this a configurable setting anywhere, and if not, what can I recompile to change it anyway?&lt;/p&gt;&#xA;" OwnerUserId="16950" LastActivityDate="2019-01-07T09:29:29.210" Title="Configuring media keys volume adjustment tick/step size" Tags="|sound|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17828" PostTypeId="1" AcceptedAnswerId="17830" CreationDate="2019-01-07T09:33:27.137" Score="0" ViewCount="346" Body="&lt;p&gt;I have a laptop &lt;strong&gt;Lenovo G50-30&lt;/strong&gt; &lt;strong&gt;(Intel Celeron N2840, 4GB of RAM, NVIDIA 820M)&lt;/strong&gt;. Will this OS normally work on this device?&lt;/p&gt;&#xA;" OwnerUserId="16951" LastActivityDate="2019-01-29T07:16:44.467" Title="Intel Celeron N2840 and Elementary OS 5.0 Juno" Tags="|release-juno|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17829" PostTypeId="2" ParentId="11468" CreationDate="2019-01-07T09:35:30.630" Score="1" Body="&lt;p&gt;It's a problem with the different DPI of the monitors. I have resolved it in this way with xrandr:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --dpi 276 --fb 1920x1080     --output eDP-1 --off     --output DP-1 --off     --output DP-2 --scale 1x1 --panning 1920x1080 --auto&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that this turns off the laptop display. You can play around with the settings a bit and even use the graphical tool &lt;em&gt;arandr&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16953" LastActivityDate="2019-01-07T09:35:30.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17830" PostTypeId="2" ParentId="17828" CreationDate="2019-01-07T09:40:22.837" Score="1" Body="&lt;p&gt;Yes elementary OS &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; will run on your computer. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-07T09:40:22.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17832" PostTypeId="1" CreationDate="2019-01-07T14:13:38.303" Score="1" ViewCount="632" Body="&lt;p&gt;For the last few days, the Music App won't launch. I click on the icon, it appears in the dock, opens a window and closes down straight away, without giving me the chance to see what's happening. Any clue? &#xA;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After today's eOS update, it worked again, then now is back to failing to launch, again.&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="26" LastEditDate="2019-02-20T01:42:29.553" LastActivityDate="2019-02-20T01:42:29.553" Title="Why won't the Music App launch?" Tags="|music|crash|apps|launcher|" AnswerCount="2" CommentCount="0" ClosedDate="2019-05-05T17:58:25.517" ContentLicense="CC BY-SA 4.0" />
  <row Id="17833" PostTypeId="2" ParentId="17832" CreationDate="2019-01-07T16:23:56.647" Score="0" Body="&lt;p&gt;Welcome to eOS SE. Please follow these steps and answer the questions,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is the problem happening with a &lt;strong&gt;particular file or type&lt;/strong&gt;? &lt;/li&gt;&#xA;&lt;li&gt;Can you play those file with any other music player? &lt;/li&gt;&#xA;&lt;li&gt;Do you have Ubuntu's &lt;strong&gt;default media codecs&lt;/strong&gt; installed? &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If you want to install default media codecs, please execute this command in the terminal. If your problem is caused by missing codec than this will help.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to try another music player you can try &lt;code&gt;vlc&lt;/code&gt;. Get it by executing,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-07T16:23:56.647" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17834" PostTypeId="1" CreationDate="2019-01-07T17:16:39.580" Score="0" ViewCount="30" Body="&lt;p&gt;I have a Dell Inspiron 7000 14&quot; FHD with resolution of &lt;code&gt;1920x1080&lt;/code&gt;. All things show so small. For example, Google font show like size 5, the size of font existent on the instructions on a medicine, impossible for me that don't have perfect vision.&#xA;So I change the scale of the &lt;a href=&quot;/questions/tagged/system&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;system&amp;#39;&quot; rel=&quot;tag&quot;&gt;system&lt;/a&gt; and size of fonts to adapt.&#xA;But when I connect my external monitor(Dell U2312HM 23&quot;), all things show so big on the monitor. I have tried to fix this with &lt;code&gt;xrandr&lt;/code&gt;, unfortunately no success.&lt;br&gt;&#xA;Anyone already got over it, this &quot;inconvenience&quot;? I believe there is a simple solution, but unfortunately, the attempts I have made, have not resolved the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Info:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    :~$ xrandr -q&#xA;Screen 0: minimum 8 x 8, current 3840 x 1082, maximum 32767 x 32767&#xA;eDP1 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 310mm x 170mm&#xA;   1920x1080     60.01*+  59.93    48.00  &#xA;   1680x1050     59.95    59.88  &#xA;   1600x1024     60.17  &#xA;   1400x1050     59.98  &#xA;   1600x900      60.00    59.95    59.82  &#xA;   1280x1024     60.02  &#xA;   1440x900      59.89  &#xA;   1400x900      59.96    59.88  &#xA;   1280x960      60.00  &#xA;   1368x768      60.00    59.88    59.85  &#xA;   1360x768      59.80    59.96  &#xA;   1280x800      59.81    59.91  &#xA;   1152x864      60.00  &#xA;   1280x720      59.86    60.00    59.74  &#xA;   1024x768      60.00  &#xA;   1024x576      60.00    59.90    59.82  &#xA;   960x540       60.00    59.63    59.82  &#xA;   800x600       60.32    56.25  &#xA;   864x486       60.00    59.92    59.57  &#xA;   640x480       59.94  &#xA;   720x405       59.51    60.00    58.99  &#xA;   640x360       59.84    59.32    60.00  &#xA;DP1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI1 connected 1920x1080+0+2 (normal left inverted right x axis y axis) 510mm x 290mm&#xA;   1920x1080     60.00*+&#xA;   1280x1024     75.02    60.02  &#xA;   1152x864      75.00  &#xA;   1024x768      75.03    60.00  &#xA;   800x600       75.00    60.32  &#xA;   640x480       75.00    59.94  &#xA;   720x400       70.08  &#xA;HDMI2 disconnected (normal left inverted right x axis y axis)&#xA;VIRTUAL1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found a person with a similar situation, that resolve wih this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output eDP1 --auto --output HDMI1 --auto --panning 3840x1080+3200+0 --scale 2x2 --left-of eDP1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I try this, but it didn't work for me.&lt;/p&gt;&#xA;" OwnerUserId="16629" LastEditorUserId="16629" LastEditDate="2019-01-08T01:38:54.250" LastActivityDate="2019-01-08T01:38:54.250" Title="Difficulty to parameterize scale 2 screens" Tags="|display|resolution|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17835" PostTypeId="1" CreationDate="2019-01-07T20:26:19.237" Score="0" ViewCount="118" Body="&lt;p&gt;I was trying to install &lt;code&gt;winehq-stable&lt;/code&gt; and it gave me an error that it needed some dependencies.  The first one I tried to install (&lt;code&gt;libglib2.0-0:i386&lt;/code&gt;) removed most of my stuff (well over 100 packages - everything from Skype to x-windows I think)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now when I do an &lt;code&gt;apt-get upgrade&lt;/code&gt; it lists a ton of packages that &quot;are no longer needed&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most of the system is no longer available (e.g. Applications menu, top bar with date/time, right top icons (network, logout, messages, etc.) and the bottom toolbar also looks totally different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't rebooted it yet because I'm not sure what will happen if I do.  Is there any way to recover?&lt;/p&gt;&#xA;" OwnerUserId="16956" LastEditorUserId="16827" LastEditDate="2019-01-07T20:34:29.157" LastActivityDate="2019-01-07T22:52:33.040" Title="Tried to install libglib2.0-0:i386 (wine dependency), and it removed most of the apps and OS" Tags="|system|wine|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17836" PostTypeId="2" ParentId="17835" CreationDate="2019-01-07T20:53:45.167" Score="0" Body="&lt;p&gt;First of all, try to login with live CD and &lt;a href=&quot;/questions/tagged/backup&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;backup&amp;#39;&quot; rel=&quot;tag&quot;&gt;backup&lt;/a&gt; your data in an external drive. Just in case, if this method didn’t work, you can still have your data and reinstall everything!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the login screen, press &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; to switch to &lt;code&gt;tty1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, type the following commands one by one,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/apt/lists/lock&#xA;&#xA;sudo rm /var/lib/dpkg/lock&#xA;&#xA;sudo rm /var/lib/dpkg/lock-frontend&#xA;&#xA;sudo dpkg --configure -a&#xA;&#xA;sudo apt clean&#xA;&#xA;sudo apt update --fix-missing&#xA;&#xA;sudo apt install -f&#xA;&#xA;sudo dpkg --configure -a&#xA;&#xA;sudo apt upgrade&#xA;&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, reboot the &lt;a href=&quot;/questions/tagged/system&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;system&amp;#39;&quot; rel=&quot;tag&quot;&gt;system&lt;/a&gt; using,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Above instructions are grabbed from here, &lt;a href=&quot;https://www.ostechnix.com/how-to-fix-broken-ubuntu-os-without-reinstalling-it/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.ostechnix.com/how-to-fix-broken-ubuntu-os-without-reinstalling-it&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-07T20:53:45.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17837" PostTypeId="2" ParentId="17835" CreationDate="2019-01-07T22:52:33.040" Score="1" Body="&lt;p&gt;Thanks All.  I tried the suggested fix, but it didn't work.  I did find something that seemed to fix what had happened.  I used these commands to create a file with all of the packages that had been deleted.  Then I ran the file to reinstall them.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo '#!/bin/bash' &amp;gt; restore&#xA;echo sudo apt-get install `grep Remove /var/log/apt/history.log | tail -1 | sed -e 's|Remove: ||g' -e 's|([^)]*)||g' -e 's|:[^ ]* ||g' -e 's|,||g'` &amp;gt;&amp;gt; restore&#xA;chmod +x restore &#xA;./restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I got it here:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/738984/how-to-undo-apt-get-autoremove&quot;&gt;https://askubuntu.com/questions/738984/how-to-undo-apt-get-autoremove&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16957" LastActivityDate="2019-01-07T22:52:33.040" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17838" PostTypeId="1" CreationDate="2019-01-08T09:24:59.120" Score="0" ViewCount="2577" Body="&lt;p&gt;I'm new to Linux and this is the first time i tried to &lt;a href=&quot;/questions/tagged/dual-boot&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;dual-boot&amp;#39;&quot; rel=&quot;tag&quot;&gt;dual-boot&lt;/a&gt; Linux. My laptop is Dell XPS 9360.&#xA;When ever i use the &lt;a href=&quot;/questions/tagged/usb&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;usb&amp;#39;&quot; rel=&quot;tag&quot;&gt;usb&lt;/a&gt; to boot elementary OS(i tried Ubuntu too and get the same error message), i get to boot but when i run the installer and at the choose partition page there is nothing to choose. And when i press the &lt;kbd&gt;+&lt;/kbd&gt; &lt;kbd&gt;-&lt;/kbd&gt; &lt;kbd&gt;change&lt;/kbd&gt; button it opens a window telling me installer crashed&#xA;this is the error message:   &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Traceback (most recent call last):&#xA;  File &quot;/usr/lib/ubiquity/plugins/ubi-partman.py&quot;, line 1302, in on_partition_list_edit_activate&#xA;    self.partman_dialog(devpart, partition, create=False)&#xA;  File &quot;/usr/lib/ubiquity/ubiquity/plugin.py&quot;, line 48, in wrapper&#xA;    return target(self, *args, **kwargs)&#xA;  File &quot;/usr/lib/ubiquity/plugins/ubi-partman.py&quot;, line 983, in partman_dialog&#xA;    if ('can_resize' not in partition or not partition['can_resize'] or&#xA;TypeError: argument of type 'NoneType' is not iterable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am using UEFI boot option and I've tried both with secure boot on/off and fastboot on/off. When i tried legacy boot it doesn't even &lt;a href=&quot;/questions/tagged/boot&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;boot&amp;#39;&quot; rel=&quot;tag&quot;&gt;boot&lt;/a&gt; and shows an error message saying,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;kernal panic and initramfs unpacking failed junk in compressed archive&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16962" LastEditorUserId="16827" LastEditDate="2019-01-08T13:05:17.723" LastActivityDate="2024-01-22T09:00:40.093" Title="elementary OS installer crashed at choosing partition screen" Tags="|system-installation|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17839" PostTypeId="1" AcceptedAnswerId="17840" CreationDate="2019-01-08T11:38:58.493" Score="1" ViewCount="55" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/a2Fxb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a2Fxb.png&quot; alt=&quot;Lots of excel showing&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I remove all these excel from &quot;other applications&quot;?. There are also lots of Word and PowerPoint things which doesn't work.Since I have removed Wine, but still doesn't go. Please help...I have used synaptic manager to remove wine and also checked with terminal. In terminal however , says it virtual packages can't be removed. &lt;/p&gt;&#xA;" OwnerUserId="16964" LastEditorUserId="16827" LastEditDate="2019-01-08T12:28:55.807" LastActivityDate="2019-01-08T12:28:55.807" Title="Wine applications are not removed after uninstalling wine" Tags="|software-installation|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17840" PostTypeId="2" ParentId="17839" CreationDate="2019-01-08T12:25:59.240" Score="0" Body="&lt;p&gt;Welcome to eOS SE. Please execute this following commands in your terminal,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -r ~/.wine&#xA;rm -r ~/.local/share/applications/wine&#xA;rm ~/.local/share/applications/wine*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-08T12:25:59.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17841" PostTypeId="1" CreationDate="2019-01-08T12:26:09.853" Score="6" ViewCount="8842" Body="&lt;p&gt;Can I use live version from &lt;a href=&quot;/questions/tagged/usb&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;usb&amp;#39;&quot; rel=&quot;tag&quot;&gt;usb&lt;/a&gt; and save the things done during the session? Or does it simply come back to original state every time it is opened from live USB?&lt;/p&gt;&#xA;" OwnerUserId="16965" LastEditorUserId="308" LastEditDate="2019-12-19T20:16:00.177" LastActivityDate="2022-07-23T17:04:53.087" Title="Is it possible to use elementary OS from a live USB while persisting its data?" Tags="|system|usb-drive|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17842" PostTypeId="2" ParentId="17841" CreationDate="2019-01-08T12:44:54.327" Score="4" Body="&lt;p&gt;elementary OS does not officially support being used as a persistent live USB. However, the following method can be tried at your own risk:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It is possible to use third-party software to have your settings stored in the live USB. Any changes you make to the system—for example, saving a file to your desktop, changing the settings in an application, or installing a program—will be stored in the overlay file. Whenever you boot the &lt;a href=&quot;/questions/tagged/usb&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;usb&amp;#39;&quot; rel=&quot;tag&quot;&gt;usb&lt;/a&gt; drive on any computer, your files, settings, and installed programs will be there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu can be used with &lt;strong&gt;live use with persistent storage&lt;/strong&gt;. And elementary is based on Ubuntu so it will work too. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please follow these steps, &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;At first download the iso of the operating system and another software called &lt;a href=&quot;http://www.linuxliveusb.com/en/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux Live USB Creator&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Install Linux Live USB Creator. Insert the USB drive you want to use into your computer’s USB port and launch the “LiLi USB Creator” application you just installed.&lt;/li&gt;&#xA;&lt;li&gt;Select the USB drive you want to use in the “Step 1: Choose Your Key” box.&lt;/li&gt;&#xA;&lt;li&gt;Provide your downloaded ISO file. Click the “ISO / IMG / ZIP” button under “Step 2: Choose a Source”, browse to the .ISO file on your computer, and double-click it.&lt;/li&gt;&#xA;&lt;li&gt;Use the options in the “&lt;strong&gt;Step 3: Persistence&lt;/strong&gt;” section to select how much space your want to use for persistent storage on the USB drive. Drag the slider all the way to the right to select the maximum amount of storage.&lt;/li&gt;&#xA;&lt;li&gt;You’ve now configured all the settings you need to configure. To create your live USB drive with persistent storage, click the lightning icon under “Step 5: Create”&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Above instructions are grabbed from &lt;a href=&quot;https://www.howtogeek.com/howto/14912/create-a-persistent-bootable-ubuntu-usb-flash-drive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; which shows &lt;em&gt;How to Make a Persistent Ubuntu USB Drive on Windows&lt;/em&gt;. However, the process is &lt;strong&gt;quite same&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="308" LastEditDate="2019-12-19T20:18:38.820" LastActivityDate="2019-12-19T20:18:38.820" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17843" PostTypeId="2" ParentId="15685" CreationDate="2019-01-08T12:45:10.660" Score="2" Body="&lt;p&gt;With &lt;code&gt;io.elementary.terminal&lt;/code&gt;, which seems to be the new name, you might be able to do this using the &lt;code&gt;-e&lt;/code&gt; flag. I've done something very similar with &lt;code&gt;xfce4-terminal -e&lt;/code&gt; before, maybe that helps when looking for examples around the web. You can find this option in the manpage.&lt;/p&gt;&#xA;" OwnerUserId="16950" LastActivityDate="2019-01-08T12:45:10.660" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17846" PostTypeId="1" CreationDate="2019-01-08T15:48:25.570" Score="0" ViewCount="111" Body="&lt;p&gt;I use elementary OS Juno(&lt;a href=&quot;/questions/tagged/juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;juno&lt;/a&gt;) and I am getting this when I run update through terminal, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0fFS7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0fFS7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:7 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata&#xA;  File has unexpected size (98548 != 98544). Mirror sync in progress? [IP: 104.28.5.44 80]&#xA;  Hashes of expected file:&#xA;   - Filesize:98544 [weak]&#xA;   - SHA256:880c7b018cb7b3b15e7b5b4e874018bb3ffe02229eee079f2af44ec5c4731bc6&#xA;   - SHA1:4febfca82a3495510dcd05bcc8046c2ae5bb0f30 [weak]&#xA;   - MD5Sum:875620c0d073eb28481c5bcaccca3b68 [weak]&#xA;  Release file created at: Tue, 08 Jan 2019 15:32:21 +0000&#xA;Hit:8 http://id.archive.ubuntu.com/ubuntu bionic-backports InRelease&#xA;Fetched 5.893 B in 2s (3.661 B/s)&#xA;Reading package lists... Done&#xA;E: Failed to fetch http://packages.elementary.io/appcenter/dists/bionic/main/dep11/Components-amd64.yml.xz  File has unexpected size (98548 != 98544). Mirror sync in progress? [IP: 104.28.5.44 80]&#xA;   Hashes of expected file:&#xA;    - Filesize:98544 [weak]&#xA;    - SHA256:880c7b018cb7b3b15e7b5b4e874018bb3ffe02229eee079f2af44ec5c4731bc6&#xA;    - SHA1:4febfca82a3495510dcd05bcc8046c2ae5bb0f30 [weak]&#xA;    - MD5Sum:875620c0d073eb28481c5bcaccca3b68 [weak]&#xA;   Release file created at: Tue, 08 Jan 2019 15:32:21 +0000&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16966" LastEditorUserId="16827" LastEditDate="2019-01-08T16:28:15.133" LastActivityDate="2019-02-23T11:06:42.113" Title="Error updating elementary OS Juno from terminal" Tags="|updates|release-juno|" AnswerCount="0" CommentCount="2" ClosedDate="2019-02-24T01:45:18.473" ContentLicense="CC BY-SA 4.0" />
  <row Id="17847" PostTypeId="1" CreationDate="2019-01-08T15:52:23.073" Score="0" ViewCount="539" Body="&lt;p&gt;I have set the scaling factor in the display settings as well as using dconf editor to '1', i.e. no scaling, but even after having rebooted a number of times the os still starts with 'pixel doubled' (2) scaling. Is there anywhere else I can disable this behaviour?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect the reason for the automatic scaling is that my built-in screen is 4k@15.6&quot;. However, the setting is not set to automatic.&lt;/p&gt;&#xA;" OwnerUserId="16950" LastActivityDate="2019-01-08T15:52:23.073" Title="elementary OS ignores manually set scaling factor" Tags="|display|hidpi|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17848" PostTypeId="2" ParentId="12369" CreationDate="2019-01-08T16:43:42.117" Score="4" Body="&lt;p&gt;Open &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt; and change &lt;code&gt;AutoEnable=true&lt;/code&gt; to &lt;code&gt;AutoEnable=false&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14223" LastActivityDate="2019-01-08T16:43:42.117" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17850" PostTypeId="1" AcceptedAnswerId="17873" CreationDate="2019-01-08T18:01:57.887" Score="0" ViewCount="1320" Body="&lt;p&gt;Curious if there is a list of hardware successfully running elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reason I ask is because I have 2 MacBook pros, on the newer one, my elementary OS install &lt;a href=&quot;/questions/tagged/usb&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;usb&amp;#39;&quot; rel=&quot;tag&quot;&gt;usb&lt;/a&gt; stick loads into a glorious looking desktop, yet the cursor won't move nor is the keyboard responding.  Yet when I load the same stick into a slightly older MacBook Pro, every thing works perfectly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here I am, exciting to dig in, wondering if I could buy an older refurbished iMac to run elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is a list, I'd like to participate.  If not, I am curious if anyone else is interested. Seems to me would be invaluable for increasing rate of adoption and growing a happy user base.&lt;/p&gt;&#xA;" OwnerUserId="16967" LastEditorUserId="16827" LastEditDate="2019-01-08T18:14:23.610" LastActivityDate="2019-01-10T01:01:26.453" Title="Is there a supported hardware list for elementary OS?" Tags="|hardware|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17851" PostTypeId="1" CreationDate="2019-01-08T18:09:15.747" Score="3" ViewCount="486" Body="&lt;p&gt;I've recently installed elementary OS Juno on a laptop and it seems like the way it discharges (according to Elementary) is extremely inaccurate. I'll charge the laptop, unplug it, it'll go alright for a bit, then suddenly drop from something like 30-40% to 5% and try to shut down, however the battery is not empty. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll keep it running and it'll stay on 1% for hours, until it then finally fully shuts down due to lack of power, and it won't turn on unless I charge it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It keeps doing it and I was wondering if there's a way to fix this. It seems like it's a calibration issue or something. I've check the bios and the battery health is still good. &lt;/p&gt;&#xA;" OwnerUserId="16968" LastActivityDate="2019-01-08T18:09:15.747" Title="Battery percentage not accurate at all" Tags="|battery|" AnswerCount="0" CommentCount="3" ClosedDate="2019-10-22T02:54:44.543" ContentLicense="CC BY-SA 4.0" />
  <row Id="17853" PostTypeId="2" ParentId="10520" CreationDate="2019-01-08T19:02:45.510" Score="2" Body="&lt;p&gt;Please go to AppCenter(&lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;) over an Ethernet connection and click on the installed tab. If you see &lt;strong&gt;bcmwl-kernel-source&lt;/strong&gt;, install it by clicking on &lt;kbd&gt;free&lt;/kbd&gt;. Your WiFi(&lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt;) should be working again.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-01-08T19:02:45.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17855" PostTypeId="2" ParentId="17806" CreationDate="2019-01-08T19:19:26.620" Score="1" Body="&lt;p&gt;I have Thunderbird 60.2.1 working on Juno and I am using the date formats exactly as you request (I'm in the UK and am very definitely of the English English camp...). In System Settings &gt; Language &amp;amp; Region I have &quot;United Kingdom&quot; as Region, &quot;United Kingdom&quot; as Formats. I have also clicked on the &quot;Set System Language&quot; button (requires unlocking the system settings).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Thunderbird I have nothing which will let me override the formats.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would advise checking your system language settings. In terminal, just enter &quot;locale&quot; and hit return and it will show you what the current settings actually are. If they don't look right then search online for &quot;setlocale&quot; and you will find no end of guides as how to get this right. Or, of course, try &quot;man setlocale&quot;.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2019-01-08T19:19:26.620" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17857" PostTypeId="1" CreationDate="2019-01-08T21:14:37.813" Score="1" ViewCount="171" Body="&lt;p&gt;I'm using Juno and Kernel 4.18 and I would like to get my Magic Mouse2 scrolling working. So far everything I have tried has failed to get the Magic Mouse2 to use the &lt;code&gt;hid_magicmouse&lt;/code&gt; kernel driver. It will only use the &lt;code&gt;hid_generic&lt;/code&gt; driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone got this working? If so I would love to hear back so others can get their Magic Mice fully functional.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sincerely,&lt;br&gt;&#xA;Ralph.&lt;/p&gt;&#xA;" OwnerUserId="16539" LastEditorUserId="16827" LastEditDate="2019-01-09T08:20:57.500" LastActivityDate="2019-01-09T08:20:57.500" Title="How can I get an Apple Magic Mouse2 to scroll?" Tags="|release-juno|mouse|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17859" PostTypeId="1" CreationDate="2019-01-08T21:53:26.180" Score="2" ViewCount="1559" Body="&lt;p&gt;I installed Wine through App Center and nothing is wrong with that, except than when I want execute it, it doesn't find into apps menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, Wine is not present at file associations. When I try to &quot;Open with ...&quot; an .exe file, Wine is not found on programs list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried removing it and reinstalling from terminal with &lt;code&gt;sudo apt install winehq-stable&lt;/code&gt; but results are always the same.&lt;/p&gt;&#xA;" OwnerUserId="16971" LastEditorUserId="16971" LastEditDate="2019-01-08T22:06:28.167" LastActivityDate="2019-01-09T13:55:01.390" Title="Cannot find Wine after successfull install" Tags="|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17860" PostTypeId="2" ParentId="17859" CreationDate="2019-01-08T23:42:34.787" Score="5" Body="&lt;p&gt;You have installed wine, but you may need to configure it. Please run &lt;code&gt;winecfg&lt;/code&gt; in your terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may also need to use the command line to tell Wine to open an application the first time you do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, if I was trying to run &quot;application.exe&quot; in the downloads folder:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;wine application.exe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The application should run and should also be added to the Applications launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I highly recommend that you take a look at WineHQ, which is a great online resource for using wine that not only includes well-written and thorough documentation and wiki pages, but also has an extensive database that can help you if you're having trouble with a particular Windows application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.winehq.org/help&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.winehq.org/help&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16939" LastEditorUserId="16939" LastEditDate="2019-01-09T13:55:01.390" LastActivityDate="2019-01-09T13:55:01.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17861" PostTypeId="1" CreationDate="2019-01-09T02:49:58.573" Score="2" ViewCount="140" Body="&lt;p&gt;I recently bought a 240GB SSD. Before that, the system (Elementary OS Loki) was installed on a 1TB HDD, consuming 512Gb. My idea would be to leave the user's folder on the HDD, which consumes lots of disk space, and clone only the system folders to the SSD. If this really is not possible, I'd like to know how I can back up and restore programs (.deb packages) from one system to another.&lt;/p&gt;&#xA;" OwnerUserId="16972" LastActivityDate="2024-04-06T09:05:00.650" Title="Migration from a HDD to a SSD" Tags="|ssd|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17862" PostTypeId="2" ParentId="17850" CreationDate="2019-01-09T06:14:19.610" Score="0" Body="&lt;p&gt;This is far from official, and in fact is Arch Linux based but is reasonably comprehensive for many different vendors - shows if there are any compatibility issues with Linux modules etc &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Laptop/Apple&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Laptop/Apple&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2019-01-09T06:14:19.610" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17864" PostTypeId="1" AcceptedAnswerId="17982" CreationDate="2019-01-09T08:46:58.603" Score="8" ViewCount="275" Body="&lt;p&gt;not really sure what to call this, but if my computer wakes up from sleep, I have no issues, however if my computer resumes from a suspend action, then my screen looks like the attached screenshot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an Nvidia Graphics card with the Nvidia 390 driver installed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U0C9s.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U0C9s.jpg&quot; alt=&quot;Screenshot of resume state&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2019-05-17T23:35:49.780" Title="Screen corruption after suspend" Tags="|display|suspend|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17868" PostTypeId="1" AcceptedAnswerId="17891" CreationDate="2019-01-09T16:18:21.650" Score="0" ViewCount="68" Body="&lt;p&gt;I have a problem with&quot; Files &quot;- I select 3 or more video files with the mouse, then RMB for any of the files, then select&quot; open in Video &quot;in the menu , then&quot; Files &quot; is closed. Okay!&#xA;Who can help. &#xA;I installed codecs and even Parole - I do not know what to sin. If there's anything I need to report on my system, I'm ready.&lt;/p&gt;&#xA;" OwnerUserId="16982" LastActivityDate="2019-01-10T16:37:48.613" Title="Closes Files after selecting multiple videos" Tags="|pantheon-files|video-player|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17870" PostTypeId="1" CreationDate="2019-01-09T20:29:00.800" Score="0" ViewCount="56" Body="&lt;p&gt;There is a very simple option that would help me greatly in order to achieve more producivity. I would like to be able to press the metakey and scroll down, and instantly go to the previous workspace, and metakey and scroll up to do the opposite. Is it possible?&lt;/p&gt;&#xA;" OwnerUserId="16986" LastActivityDate="2019-10-09T07:02:05.267" Title="I would like to switch workspaces by using the mousewheel" Tags="|desktop|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17872" PostTypeId="1" CreationDate="2019-01-09T21:21:12.953" Score="1" ViewCount="165" Body="&lt;p&gt;I have paid for a lifetime subscription to VPN Unlimited, so would like to use it on my Elementary notebook computer. Unfortunately, while it does appear to run correctly, I can't get it to do so in any mode other than w/its program window displaying. Yes, I know, I can move it to another desktop. But, under Windows (and other linuxes), you can close VPN Unlimited's main window and the program will minimise to the notification area.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I Googled a bit, and found the page below, but doing as directed did not solve the issue. Any idea of what I can do to get VPN Unlimited to minimise to Wingpanel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16877/vpn-connections-tray-icons-in-juno&quot;&gt;VPN Connections &amp;amp; Tray Icons in Juno&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;-Z&lt;/p&gt;&#xA;" OwnerUserId="16989" LastActivityDate="2019-02-09T02:02:25.477" Title="VPN Unlimited- minimise to Wingpanel?" Tags="|wingpanel|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17873" PostTypeId="2" ParentId="17850" CreationDate="2019-01-09T21:58:41.677" Score="0" Body="&lt;p&gt;No there is not.  Hopefully someone will correct me soon.&lt;/p&gt;&#xA;" OwnerUserId="16967" LastActivityDate="2019-01-09T21:58:41.677" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17874" PostTypeId="2" ParentId="17850" CreationDate="2019-01-10T01:01:26.453" Score="0" Body="&lt;p&gt;Since Elementary is built on Ubuntu, your best bet would probably be to use the &lt;a href=&quot;https://certification.ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Certified Hardware list&lt;/a&gt;. Insofar as there's a difference between Elementary and Ubuntu in terms of driver support, it's going to be a pretty minimal difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu also has a bigger user community; see if the same issue exists with Ubuntu 18.04 LTS on a USB stick, and if it does, see if that community can help you.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-10T01:01:26.453" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17875" PostTypeId="2" ParentId="17872" CreationDate="2019-01-10T01:03:27.857" Score="1" Body="&lt;p&gt;That's most likely because for better or worse, Elementary/Pantheon defaults to hiding indicators that haven't been whitelisted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can correct this issue, and get indicator functionality back in general &lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;by following these instructions on GitHub&lt;/a&gt;. Basically install &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+files/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;this package&lt;/a&gt; and then reboot.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-10T01:03:27.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17876" PostTypeId="1" CreationDate="2019-01-10T01:26:37.323" Score="3" ViewCount="1321" Body="&lt;p&gt;While installing Elementary OS for my Acer Spin 1 SP111-32N, it keeps on giving me this error at the very end of the installation. I know my computer uses an eMMC SSD drive, so maybe that is the issue.&lt;/p&gt;&#xA;" OwnerUserId="16991" LastActivityDate="2023-07-30T07:19:03.167" Title="&quot;Unable to install GRUB in /dev/mmcblk1&quot;" Tags="|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17877" PostTypeId="1" CreationDate="2019-01-10T02:00:00.783" Score="1" ViewCount="58" Body="&lt;p&gt;Hi guys i cant seem to turn on my WiFi at all. I can only connect through Ethernet it seems. I'm curious if I didn't download Elementary correctly. When I goto wifi it wont turn on after i select it. When I see the options for the wifi card it appears but in gray. Im trying to use my WiFi adapter but i cant even find the drivers for it. Any help would be awesome i'm stumped and tried everything from forums to even switching to mint and Ubuntu but none of them can get my wifi to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;(also the wifi adapter is Panda 300Mbps Wireless N USB Adapter)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks again&lt;/p&gt;&#xA;" OwnerUserId="16990" LastEditorUserId="16827" LastEditDate="2019-01-10T09:52:09.290" LastActivityDate="2019-01-10T09:52:09.290" Title="Cant turn on WiFi only Ethernet" Tags="|wifi|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17878" PostTypeId="2" ParentId="17630" CreationDate="2019-01-10T03:48:19.027" Score="1" Body="&lt;p&gt;If it's a MacBook Pro, more than likely it's got a Broadcom wifi chip. These require a driver to work correctly under Linux. All you need to do is connect to the internet temporarily using either a USB WiFi adapter or Ethernet and then run &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know certain Mac models can be a bit more problematic, but usually that one package does the trick.&lt;/p&gt;&#xA;" OwnerUserId="16939" LastActivityDate="2019-01-10T03:48:19.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17880" PostTypeId="1" CreationDate="2019-01-10T10:06:35.147" Score="2" ViewCount="89" Body="&lt;p&gt;It's about a 50/50 chance when I try to tile Chrome windows to the left and right half of the screen whether or not it works. I haven't been able to reliably determine how to reproduce it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens is I will open a new second window, and drag it to the side of the screen to snap it to that half. This will seem to succeed other than that the window stays visible in the place where I held it against the side, and doesn't move/resize to the indicated half. However, at this point, click events and such register on the place where the window &lt;em&gt;should&lt;/em&gt; be rather than where it is, so it becomes nearly impossible to fix this without closing the window using Ctrl-W. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help trying to troubleshoot this? Has anyone noticed anything similar?&lt;/p&gt;&#xA;" OwnerUserId="16950" LastEditorUserId="16872" LastEditDate="2019-01-25T05:45:46.330" LastActivityDate="2019-01-25T05:45:46.330" Title="Tiling regularly breaks: window does not render in the same place where it registers clicks" Tags="|pantheon|window-management|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17881" PostTypeId="2" ParentId="17876" CreationDate="2019-01-10T10:11:13.473" Score="3" Body="&lt;p&gt;I have a laptop that utilizes an eMMC card as well and was able to get elementaryOS installed on it, but I did have to fiddle with some BIOS settings before any distro would install. Disabling SecureBoot as well as disabling firmware TPM. After that, choose the &quot;try elementaryOS without installing option&quot; instead of the install option when first booting from the live USB. Then, in the file manager, it's possible you'll see the eMMC mounted as an SD card or such. Unmount/eject it first, and then start the installer, and proceed as normal.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T10:11:13.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17882" PostTypeId="2" ParentId="17785" CreationDate="2019-01-10T10:40:56.390" Score="1" Body="&lt;p&gt;Open the &lt;code&gt;System Settings&lt;/code&gt; and select the &lt;code&gt;Displays&lt;/code&gt; option.&#xA;From there, you may notice a switch at the bottom of the window to toggle rotation lock. This should take care of the issue.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T10:40:56.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17883" PostTypeId="2" ParentId="17631" CreationDate="2019-01-10T10:49:02.683" Score="1" Body="&lt;p&gt;Unfortunately there's a current &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt; in elementaryOS that prevents suspend power settings from being respected. I can't provide a fix as none of the suggestions in the relevant bug threads work in any reliable manner, but I can suggest that if there is something you need to run without having the system suspend, you can use &lt;code&gt;systemd-inhibit&lt;/code&gt; to accomplish this.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemd-inhibit --mode=block --what=sleep &amp;lt;command-or-program-you-want-to-run&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T10:49:02.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17885" PostTypeId="2" ParentId="17511" CreationDate="2019-01-10T10:55:47.417" Score="1" Body="&lt;p&gt;In Files, right click on the &lt;code&gt;.blend&lt;/code&gt; file and select &quot;Properties&quot;. A small options window will appear and at the bottom there will be an &quot;Open with&quot; dropdown, and in it is an option to select another application. From here you can select Blender and set it as default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QIvJI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QIvJI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T10:55:47.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17887" PostTypeId="1" CreationDate="2019-01-10T13:04:13.543" Score="1" ViewCount="367" Body="&lt;p&gt;My laptop is a lenovo ideapad 320, and it has dolby atmos certification. On Windows (the OS that came in it), there is an app of dolby atmos to configure and equalize. There is a way to have it on elementary os?&lt;/p&gt;&#xA;" OwnerUserId="16994" LastActivityDate="2021-03-19T14:07:00.730" Title="How to install dolby atmos on elementary os?" Tags="|sound|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17888" PostTypeId="2" ParentId="17357" CreationDate="2019-01-10T13:43:19.673" Score="1" Body="&lt;p&gt;Entering this into the terminal should disable those animations completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.animations enable-animations false &amp;amp;&amp;amp; gsettings set org.gnome.desktop.interface enable-animations false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you'd like to do this in a GUI, search for dconf Editor in AppCenter (or install with &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt; in the terminal) and install that. Once it's installed, open it up and search for &quot;animation&quot;. The results should show two possible toggles, both of which need to be disabled from what I've tested just now.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T13:43:19.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17889" PostTypeId="2" ParentId="17331" CreationDate="2019-01-10T13:55:14.323" Score="1" Body="&lt;p&gt;I'm not sure if there's a setting in elementaryOS for this specifically, but you can accomplish this by creating a &lt;code&gt;systemd-inhibit&lt;/code&gt; startup command that blocks shutdown from happening so long as it's running (as long as the user is logged in). The only downside to this is that if it's running and you want to shutdown from your user, you can't without killing it. I'll explain how.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the System Settings, click on &quot;Applications&quot; and then the &quot;Startup&quot; tab. Click the small plus sign towards the bottom left and in the custom command entry box at the bottom of the small dialog that's now appeared, enter the following.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;systemd-inhibit --what=shutdown --mode=block sleep infinity&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once that's added to the list, log out and log back in. Then try logging into another account and try to shutdown. If all goes well, nothing should happen. You will need to add this to each account you want to keep from being shutdown unfortunately. If you do want to override this, you can run &lt;code&gt;killall sleep&lt;/code&gt; in the terminal and then shutdown should function normally from then on.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-10T13:55:14.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17891" PostTypeId="2" ParentId="17868" CreationDate="2019-01-10T16:37:48.613" Score="0" Body="&lt;p&gt;I have raised an issue regarding this at &lt;a href=&quot;https://github.com/elementary/files/issues/856&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/856&lt;/a&gt; and will push a PR to fix it shortly.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-01-10T16:37:48.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17894" PostTypeId="2" ParentId="17824" CreationDate="2019-01-10T23:59:46.643" Score="1" Body="&lt;p&gt;The solution was to install all of the necessary components - doh!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Linux instructions on the Brother web site were not clear enough for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The missing step was &lt;a href=&quot;https://support.brother.com/g/b/downloadend.aspx?c=au&amp;amp;lang=en&amp;amp;prod=mfc7362n_as&amp;amp;os=128&amp;amp;dlid=dlf006893_000&amp;amp;flang=4&amp;amp;type3=625&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Following the steps there got printing and scanning working correctly.&lt;/p&gt;&#xA;" OwnerUserId="16947" LastActivityDate="2019-01-10T23:59:46.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17895" PostTypeId="1" CreationDate="2019-01-11T04:53:00.810" Score="2" ViewCount="316" Body="&lt;p&gt;Does anyone know if this will still work on Juno? &lt;a href=&quot;https://www.google.com/amp/s/www.addictivetips.com/ubuntu-linux-tips/fix-nvidia-resume-bug-elementary-os-loki/amp/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.google.com/amp/s/www.addictivetips.com/ubuntu-linux-tips/fix-nvidia-resume-bug-elementary-os-loki/amp/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried running gala —replace from the terminal a couple of times but it just freezes everything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there any other solutions out there for refreshing the display after resume? (In case the title wasn’t clear, I have an Nvidia graphics card.)&lt;/p&gt;&#xA;" OwnerUserId="16999" LastActivityDate="2024-01-29T23:03:15.387" Title="Nvidia/Elementary OS Juno suspend/resume fix" Tags="|nvidia|gala|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17896" PostTypeId="2" ParentId="17475" CreationDate="2019-01-11T07:04:48.897" Score="1" Body="&lt;p&gt;If you check your settings for plank, there is an option, under the Behaviors tab that specifies: Restrict to Workspace, This may help you in the right direction&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2019-01-11T07:04:48.897" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17899" PostTypeId="1" CreationDate="2019-01-11T12:28:29.790" Score="1" ViewCount="34" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aXNgW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aXNgW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem is due to the theme I installled, I have already opened css file and edited but I can't manage to find the css classes to edit these parts and make the background of them transparent. &lt;/p&gt;&#xA;" OwnerUserId="17002" LastActivityDate="2019-01-11T12:28:29.790" Title="The wingpanel date and applications has different background" Tags="|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17900" PostTypeId="1" CreationDate="2019-01-11T13:42:20.207" Score="0" ViewCount="1070" Body="&lt;p&gt;I've recently installed Juno, and today I ran into this problem: AppCenter &gt; Updates &gt; Drivers: both &lt;em&gt;nvidia-340&lt;/em&gt; and &lt;em&gt;nvidia-driver-390&lt;/em&gt; are unable to update. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;nvidia-driver-390&lt;/em&gt; displays &quot;Error while installing package: new libnvidia-gl-390&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;nvidia-340&lt;/em&gt; displays &quot;Error while installing package: trying to overwrite '/lib/udev/rules.d/71-nvidia.rules', which is also in package nvidia-kernel-common-390 390.77-0ubuntu0.18.04.1&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not a linux pro user and this problem never happened to me in one year of Loki. o I tried with some basic commands like &quot;sudo apt autoremove&quot;, &quot;sudo apt --fix-broken install&quot;, and the terminal displays:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sudo apt-get autoremove &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Reading package lists... Done&#xA;  Building dependency tree&lt;br&gt;&#xA;  Reading state information... Done&#xA;  You might want to run 'apt --fix-broken install' to correct these.&#xA;  The following packages have unmet dependencies.&#xA;   libnvidia-ifr1-390 : Depends: libnvidia-gl-390 but it is not installed&#xA;   libnvidia-ifr1-390:i386 : Depends: libnvidia-gl-390:i386 but it is not installed&#xA;   nvidia-driver-390 : Depends: libnvidia-gl-390 (= 390.77-0ubuntu0.18.04.1) but it is not installed&#xA;                       Recommends: libnvidia-gl-390:i386 (= 390.77-0ubuntu0.18.04.1)&#xA;  E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sudo apt --fix-broken install&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Reading package lists... Done&#xA;  Building dependency tree&lt;br&gt;&#xA;  Reading state information... Done&#xA;  Correcting dependencies... Done&#xA;  The following packages were automatically installed and are no longer required:&#xA;    lib32gcc1 libc6-i386 ocl-icd-libopencl1&#xA;  Use 'sudo apt autoremove' to remove them.&#xA;  The following additional packages will be installed:&#xA;    libnvidia-gl-390 libnvidia-gl-390:i386&#xA;  The following NEW packages will be installed&#xA;    libnvidia-gl-390 libnvidia-gl-390:i386&#xA;  0 to upgrade, 2 to newly install, 0 to remove and 0 not to upgrade.&#xA;  40 not fully installed or removed.&#xA;  Need to get 0 B/29.2 MB of archives.&#xA;  After this operation, 147 MB of additional disk space will be used.&#xA;  Do you want to continue? [Y/n] y&#xA;  (Reading database ... 258970 files and directories currently installed.)&#xA;  Preparing to unpack .../libnvidia-gl-390_390.77-0ubuntu0.18.04.1_amd64.deb ...&#xA;  diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/x86_64-linux-gnu/libGL.so.1.distrib by nvidia-340&#xA;  dpkg-divert: error: mismatch on package&#xA;    when removing 'diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 by libnvidia-gl-390'&#xA;    found 'diversion of /usr/lib/x86_64-linux-gnu/libGL.so.1 to /usr/lib/x86_64-linux-gnu/libGL.so.1.distrib by nvidia-340'&#xA;  dpkg: error processing archive /var/cache/apt/archives/libnvidia-gl-390_390.77-0ubuntu0.18.04.1_amd64.deb (--unpack):&#xA;   new libnvidia-gl-390:amd64 package pre-installation script subprocess returned error exit status 2&#xA;  Preparing to unpack .../libnvidia-gl-390_390.77-0ubuntu0.18.04.1_i386.deb ...&#xA;  diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/i386-linux-gnu/libGL.so.1.distrib by nvidia-340&#xA;  dpkg-divert: error: mismatch on package&#xA;    when removing 'diversion of /usr/lib/i386-linux-gnu/libGL.so.1 by libnvidia-gl-390'&#xA;    found 'diversion of /usr/lib/i386-linux-gnu/libGL.so.1 to /usr/lib/i386-linux-gnu/libGL.so.1.distrib by nvidia-340'&#xA;  dpkg: error processing archive /var/cache/apt/archives/libnvidia-gl-390_390.77-0ubuntu0.18.04.1_i386.deb (--unpack):&#xA;   new libnvidia-gl-390:i386 package pre-installation script subprocess returned error exit status 2&#xA;  Errors were encountered while processing:&#xA;   /var/cache/apt/archives/libnvidia-gl-390_390.77-0ubuntu0.18.04.1_amd64.deb&#xA;   /var/cache/apt/archives/libnvidia-gl-390_390.77-0ubuntu0.18.04.1_i386.deb&#xA;  E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Has anyone got this problem? Or better, does anyone know how to fix it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I've also run these commands:&#xA;- nvidia-smi&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;-nvidia-settings&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;ERROR: NVIDIA driver is not loaded&#xA;  ERROR: Error querying enabled displays on GPU 0 (Missing&#xA;         Extension).&#xA;  ERROR: Error querying connected displays on GPU 0 (Missing&#xA;         Extension).&#xA;  ** Message: 15:00:09.089: PRIME: Requires offloading&#xA;  ** Message: 15:00:09.089: PRIME: is it supported? yes&#xA;  ERROR: nvidia-settings could not find the registry key file.&#xA;         This file should have been installed along with this&#xA;         driver at&#xA;         /usr/share/nvidia/nvidia-application-profiles-key-docum&#xA;         entation. The application profiles will continue to&#xA;         work, but values cannot be prepopulated or validated,&#xA;         and will not be listed in the help text. Please see the&#xA;         README for possible values and descriptions.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thanks for your time.&lt;/p&gt;&#xA;" OwnerUserId="13198" LastEditorUserId="13198" LastEditDate="2019-01-12T14:02:42.697" LastActivityDate="2019-01-12T14:02:42.697" Title="Error during NVIDIA drivers update" Tags="|nvidia|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17903" PostTypeId="1" AcceptedAnswerId="17904" CreationDate="2019-01-11T20:43:26.780" Score="2" ViewCount="827" Body="&lt;p&gt;I am on a Dell 9360 on which I have installed elementary Juno. I have it attached to a Samsung 27 in monitor. I was using the two screens successfully unmirrored with the Dell on the left as the primary monitor and the Samsung on the right. I turned the Samsung monitor off for a minute and toggled the &lt;strong&gt;mirror displays&lt;/strong&gt; setting. When I tried to switch things back, the interface indicated I had toggled off the &lt;strong&gt;mirror displays&lt;/strong&gt; setting, but I got no dialog box asking if I wanted to keep the settings and they remain mirrored. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I shut the settings screen, reopened it, and now the &lt;strong&gt;mirror displays&lt;/strong&gt; setting is toggled on. The Samsung is showing as the primary monitor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried detaching the HDMI cable (which is attached through one of these USB-C all in one hubs with an HDMI port, some USB 3.0 ports as well as an ethernet jack), rebooting, then plugging the HDMI again. Not sure what else to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? Many thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17006" LastActivityDate="2019-01-11T20:59:56.963" Title="Can't un-mirror display for dual monitors - Juno" Tags="|release-juno|display|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17904" PostTypeId="2" ParentId="17903" CreationDate="2019-01-11T20:59:56.963" Score="3" Body="&lt;p&gt;OK - After digging around I found the Windows-P key on the keyboard somehow should it lose. This solution was buried in the comments here: &lt;a href=&quot;https://www.reddit.com/r/linux4noobs/comments/3kohhd/disabled_second_monitor_in_elementary_os_now_i/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/linux4noobs/comments/3kohhd/disabled_second_monitor_in_elementary_os_now_i/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17006" LastActivityDate="2019-01-11T20:59:56.963" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17905" PostTypeId="2" ParentId="17292" CreationDate="2019-01-11T22:20:30.820" Score="1" Body="&lt;p&gt;Credit goes to &lt;a href=&quot;https://elementaryos.stackexchange.com/users/16523/connor-finley&quot;&gt;Connor&lt;/a&gt;, but I am adding this as an answer because I came here after encountering this problem and would like others to know it has been solved. Peace!&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;According to Connor's comment in an answer posted bellow,&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Okay, I FINALLY fixed it! The problem was that I needed to flash it in DD mode like I said earlier. I did that and it installed fine, but after that there was one problem. When I logged in, everything showed up, but then when I clicked on a program, it went black for a second, and it logged me out. When I logged back in again, nothing but the wallpaper and the mouse cursor showed up. So the problem for that was that I needed to install the NVIDIA drivers, so I pressed Ctrl+Alt+F2, which brought up a terminal, and then followed the instructions from this guide. &lt;a href=&quot;https://linuxconfig.org/how-to-install-the-nvidia-drivers-on-ubuntu-18-04-bionic-beaver-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;bit.ly/2P8gGbe&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17007" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-01-13T07:07:19.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17906" PostTypeId="2" ParentId="10288" CreationDate="2019-01-11T23:08:23.170" Score="3" Body="&lt;p&gt;Try &lt;em&gt;&quot;nmcli radio wifi on&quot;&lt;/em&gt;. It works for me.&lt;/p&gt;&#xA;" OwnerUserId="2778" LastActivityDate="2019-01-11T23:08:23.170" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17907" PostTypeId="1" AcceptedAnswerId="18394" CreationDate="2019-01-12T01:56:25.800" Score="2" ViewCount="54" Body="&lt;p&gt;I have a laptop with Elementary OS 0.5 with SSD drive. Every time it boots it executes fstream. Can anybody point me which service needs to be disabled to prevent this. I want to conserve as much battery as possible.&lt;/p&gt;&#xA;" OwnerUserId="17008" LastActivityDate="2019-03-01T22:23:48.353" Title="How to disable fstream on boot" Tags="|boot|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17908" PostTypeId="1" CreationDate="2019-01-12T05:09:16.043" Score="0" ViewCount="2826" Body="&lt;p&gt;I've been trying to improve the sound in elementary Loki OS by following this tutorial&#xA;&lt;a href=&quot;https://medium.com/@gamunu/enable-high-quality-audio-on-linux-6f16f3fe7e1f&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@gamunu/enable-high-quality-audio-on-linux-6f16f3fe7e1f&lt;/a&gt;&#xA;but I cant seem to complete the last step as I'm unable to locate the &lt;code&gt;asound.conf&lt;/code&gt; file. Any help would be be great. thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Finally you have to configure the alsa to get the best audio output:&quot;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ vim /etc/asound.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The default configuration will be something similar to following:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Use PulseAudio by default&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pcm.!default {&#xA;type pulse&#xA;fallback &quot;sysdefault&quot;&#xA;hint {&#xA;show on&#xA;description &quot;Default ALSA Output (currently PulseAudio Sound Server)&quot;&#xA;}&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change it to this:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Use PulseAudio plugin hw&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pcm.!default {&#xA;type plug&#xA;slave.pcm hw&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17009" LastEditorUserId="16827" LastEditDate="2019-01-13T07:24:41.787" LastActivityDate="2019-06-12T16:01:21.303" Title="locating asound.conf file" Tags="|files|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17909" PostTypeId="2" ParentId="17870" CreationDate="2019-01-12T05:30:23.203" Score="1" Body="&lt;p&gt;If you open the Multitasking View with either &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Down&lt;/kbd&gt; or by clicking on the Multitasking View item in the Applications Menu or the Dock, you can scroll between workspaces with the mousewheel.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-12T05:30:23.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17911" PostTypeId="2" ParentId="17820" CreationDate="2019-01-12T10:43:29.293" Score="1" Body="&lt;p&gt;I used the instructions in this post and got elementary working on my 2009 27&quot; iMac.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Download your Linux distribution to the Mac. We recommend Ubuntu 16.04.4 LTS if this is your first Linux install. Save the file to your Downloads folder.&lt;/li&gt;&#xA;  &lt;li&gt;Download and install an app called Etcher from Etcher.io. This will be used to copy the Linux install .ISO file to your USB drive.&lt;/li&gt;&#xA;  &lt;li&gt;Open Etcher and click the Settings icon in the top-right. Place a tick in Unsafe Mode and click Yes, Continue. Then Click Back.&lt;/li&gt;&#xA;  &lt;li&gt;Click Select Image. Choose ubuntu-16.04.1-desktop-amd64.iso (or the image you downloaded in Step 1).&lt;/li&gt;&#xA;  &lt;li&gt;Insert your USB Thumb Drive. A reminder that the US Flash drive will be erased during this installation process. Make sure you've got&#xA;  nothing you want on it.&lt;/li&gt;&#xA;  &lt;li&gt;Click Change under Select Drive. Look carefully and pick the drive that matches your USB Thumb Drive in size. It should be  /dev/disk1 if&#xA;  you only have a single hard drive in your Mac. Or /dev/disk2,&#xA;  /dev/disk3 and so on (if you have more drives attached). Do not pick&#xA;  /dev/disk0. That's your hard drive. Pick /dev/disk0 and you'll wipe&#xA;  your macOS hard drive You've been warned!&lt;/li&gt;&#xA;  &lt;li&gt;Click Flash! Wait for the iso file to be copied to the USB Flash Drive.&lt;/li&gt;&#xA;  &lt;li&gt;Remove the USB Flash Drive from your Mac.&lt;/li&gt;&#xA;  &lt;li&gt;Shut down the Mac you want to install Linux on and attach the USB stick.&lt;/li&gt;&#xA;  &lt;li&gt;Power up the Mac while holding down the Option key.&lt;/li&gt;&#xA;  &lt;li&gt;Choose the EFI Boot option from the startup screen and press Return.&lt;/li&gt;&#xA;  &lt;li&gt;You will see a black and white screen with options to Try Ubuntu and Install Ubuntu. Don't choose either yet, press &quot;e&quot; to edit the&#xA;  boot entry.&lt;/li&gt;&#xA;  &lt;li&gt;Edit the line that begins with Linux and place the word &quot;nomodeset&quot; after &quot;quiet splash&quot;. The whole line should read: &quot;linux&#xA;  /casper/vmlinuz.efi            file=/cdrom/preseed/ubuntu.seed&#xA;  boot=casper quiet splash nomodeset --. (See screenshot, below.)&lt;/li&gt;&#xA;  &lt;li&gt;Press F10.&lt;/li&gt;&#xA;  &lt;li&gt;Ubuntu boots into trial mode.&lt;/li&gt;&#xA;  &lt;li&gt;Double-click the icon marked &quot;Install Ubuntu&quot;.&lt;/li&gt;&#xA;  &lt;li&gt;Select English and choose Continue.&lt;/li&gt;&#xA;  &lt;li&gt;Select &quot;Install this third-party software&quot; option and click Continue.&lt;/li&gt;&#xA;  &lt;li&gt;Click Yes to the /dev/sdb alert.&lt;/li&gt;&#xA;  &lt;li&gt;Select &quot;Erase disk and install Ubuntu&quot; and click Continue.&lt;/li&gt;&#xA;  &lt;li&gt;Ensure that Select Drive is displaying the main hard drive. Click Install Now. Click Continue in the alert window.&lt;/li&gt;&#xA;  &lt;li&gt;Select your location on the map and click Continue.&lt;/li&gt;&#xA;  &lt;li&gt;Choosing your keyboard layout and click Continue.&lt;/li&gt;&#xA;  &lt;li&gt;Enter the name and password you want to use.&lt;/li&gt;&#xA;  &lt;li&gt;Click Continue and Linux will begin installing.&lt;/li&gt;&#xA;  &lt;li&gt;When the installation has finished, you can log in using the name and password you chose during installation.&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="16827" LastEditDate="2019-10-12T16:59:41.333" LastActivityDate="2019-10-12T16:59:41.333" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17912" PostTypeId="1" AcceptedAnswerId="17923" CreationDate="2019-01-12T12:03:26.617" Score="0" ViewCount="180" Body="&lt;p&gt;Please take a look at the picture!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V6WVY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V6WVY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ogt3z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ogt3z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pItpF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pItpF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the first two images Smartgit latest version 18.2.3 #13220. On the third image of PlayOnLinux 4.2.12. I ask you to correct this behavior of windows&lt;/p&gt;&#xA;" OwnerUserId="16982" LastActivityDate="2019-01-29T07:10:42.500" Title="Strange window behavior" Tags="|pantheon|gala|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17917" PostTypeId="2" ParentId="17630" CreationDate="2019-01-13T05:18:38.917" Score="1" Body="&lt;p&gt;As &lt;a href=&quot;https://elementaryos.stackexchange.com/users/16939/mr-k99&quot;&gt;mr.k99&lt;/a&gt; said, you need to install &lt;code&gt;bcmwl-kernel-source&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how I did it on my MacBook Pro by chrooting from USB:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot from USB, where wireless driver is installed, then execute the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mkdir /media/target&#xA;$ sudo mount /dev/sdaX /media/target&#xA;$ sudo mount --bind /dev /media/target/dev&#xA;$ sudo mount --bind /proc /media/target/proc&#xA;$ sudo mount --bind /sys /media/target/sys&#xA;$ sudo chroot /media/target&#xA;# apt install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17021" LastEditorUserId="16827" LastEditDate="2019-01-13T07:10:57.463" LastActivityDate="2019-01-13T07:10:57.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17918" PostTypeId="1" CreationDate="2019-01-13T05:43:11.373" Score="0" ViewCount="40" Body="&lt;p&gt;This isn’t a question, instead is the only way I can find to report a problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following multiple downloads of Elements 5 (elementaryos-5.0-stable-1.20181016.iso), into an old MacBkPro 2011 running any one of 5 Os X\macOS versions to do downloads with - unsuccessfully -  there seem to some disfunction between youse &lt;em&gt;(sic)&lt;/em&gt; &amp;amp; me. :~\&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each .iso downloaded reports that “ . . disk image couldn’t be opened; Reason; no mountable file systems&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A 34 yr Mac-er with only light LinWin exposure, I suspect it may be me or my stuff not recognising what is contained in the .iso a.k.a. .dmg.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Having tried the usual Mac fixes for this problem, + some others, there is no success to report.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I (&amp;amp; others) am tired of APPL Inc suits stuffing up what was a half way decent OS. One that I could do 'big work' in, but now Mac-life is a struggle. Your aims for your OS sound similar what made the original Macintosh concept so easy to do work in, in that the OS soon disappears, and the work rises cleanly &amp;amp; alone to the surface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope there’s an answer around. Looking fwd to learning E 5+ .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers,&#xA;Jen,&#xA;Brisbane Oz&lt;/p&gt;&#xA;" OwnerUserId="17022" LastActivityDate="2019-01-17T09:09:47.097" Title="The E 5.0 download is damaged when into Mac Sys22 (Sierra)" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17919" PostTypeId="1" CreationDate="2019-01-13T08:46:06.557" Score="0" ViewCount="112" Body="&lt;p&gt;I am trying to install Elementary OS on my Macbook Pro 15&quot; early 2013 and the installer freezes on wifi selection system. I can select a Wi-Fi, enter a password or continue without selecting a wifi. The problem starts when i click continue to go to the next step. Nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;In short,&lt;/strong&gt; even though it recognizes wifi networks, the installer freezes to continue after wifi selection screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Things i have tried:&lt;/strong&gt;&#xA;- Different USBs,&#xA;- Unetbootin and Etcher,&#xA;- Try Elementary OS without installing (everything including wifi works but the installer is again stuck)&#xA;- Ubuntu 18.04 LTS and 18.10 (they don't recognize wifi drivers so i didn't attempt to install)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HIuGt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HIuGt.jpg&quot; alt=&quot;Wifi Selection screen on installer&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="9585" LastActivityDate="2019-01-13T08:46:06.557" Title="Elementary Installer Stuck on Wifi Selection Screen" Tags="|wifi|macbook|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17920" PostTypeId="2" ParentId="17918" CreationDate="2019-01-13T09:18:38.143" Score="2" Body="&lt;p&gt;It sounds like you're trying to open the .iso on macOS? Or maybe your browser is automatically opening (mounting) it after download?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either way, the iso for Elementary is not a data disk image that macOS can mount and read normally. It's an installation disk image that needs to be written to a USB key or CD-ROM and used to boot your machine from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll need to write the image to a USB key with something like &lt;a href=&quot;https://www.balena.io/etcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;Etcher&lt;/a&gt;, unless you're going to use something like VirtualBox or VMWare for testing Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a nice succinct &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation guide&lt;/a&gt; that might help.&lt;/p&gt;&#xA;" OwnerUserId="2753" LastEditorUserId="2753" LastEditDate="2019-01-17T09:09:47.097" LastActivityDate="2019-01-17T09:09:47.097" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17921" PostTypeId="1" CreationDate="2019-01-13T10:01:32.790" Score="0" ViewCount="431" Body="&lt;p&gt;Recently i installed Notejot apps from AppCenter then run it, then i want to hide the icon from plank without closing the app so the widget would stick on my desktop.&#xA;If we unchecked &quot;show unpinned&quot; from plank preferences it will hide all the unpinned apps when the apps running, instead of that, is it possible to hide just certain running app (in my case just Notejot app) icon from plank? &lt;/p&gt;&#xA;" OwnerUserId="16981" LastEditorUserId="16981" LastEditDate="2019-01-13T13:25:48.153" LastActivityDate="2019-01-13T13:25:48.153" Title="Hide certain running app icon in plank" Tags="|plank|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17922" PostTypeId="2" ParentId="17908" CreationDate="2019-01-13T15:27:47.770" Score="1" Body="&lt;p&gt;Don't do that. From that same post:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;slave.pcm &lt;code&gt;hw&lt;/code&gt; plugin will communicates directly with ALSA kernel driver. It is a raw communication without any conversion thus giving you a low latency audio output.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;That's creating a sound interface that doesn't use pulseaudio and gives you the direct alsa output/input. Not many apps support alsa so you will end up with a broken audio system and all of the other settings you've applied won't have any effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unless you are a music producer trying to record a single the disadvantages outweigh the advantages. The default config is already optimized to have a good quality with a fair cpu usage and a normal latency that is more than enough for any other task.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So yeah. Don't do it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, answering your question. You need to create that file since it's not needed by default. You can also just create a &lt;code&gt;.asoundrc&lt;/code&gt; file on your /home directory so that it doesn't mess with other users setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, Juno is already out so you might wanna upgrade!&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-01-13T15:27:47.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17923" PostTypeId="2" ParentId="17912" CreationDate="2019-01-13T21:33:06.290" Score="1" Body="&lt;p&gt;That's a &lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;known bug&lt;/a&gt; that may be out of the scope of elementary. Anyway the fix is to run the app with &lt;code&gt;GTK_CSD=0&lt;/code&gt;. You can do this from the command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GTK_CSD=0 playonlinux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And you can also modify the .desktop file so that it works automatically when you open the app. You just need to find the line starting with &lt;code&gt;Exec=&lt;/code&gt; and add &lt;code&gt;env GTK_CSD=0&lt;/code&gt; to it so it looks like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env GTK_CSD=0 /path/to/playonlinux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-01-13T21:33:06.290" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17924" PostTypeId="2" ParentId="17823" CreationDate="2019-01-14T03:47:22.473" Score="1" Body="&lt;p&gt;I'm pretty sure you've linked to the right answer: Plank's badges are separate from notification center, and they have to be implemented separately. However, you might consider adding a wishlist item on the &lt;a href=&quot;https://bugs.launchpad.net/plank&quot; rel=&quot;nofollow noreferrer&quot;&gt;launchpad&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16939" LastActivityDate="2019-01-14T03:47:22.473" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17925" PostTypeId="1" CreationDate="2019-01-14T08:14:51.713" Score="1" ViewCount="107" Body="&lt;p&gt;After a big update before multiple days, it is taking more than 1 min to load the desktop even I have an SSD and before that update, it was loading it immediately. How this issue can be solved?&lt;/p&gt;&#xA;" OwnerUserId="13128" LastActivityDate="2024-02-24T01:04:25.540" Title="Problem in loading the desktop in ELementaryOs!" Tags="|desktop|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17926" PostTypeId="1" CreationDate="2019-01-14T13:43:17.350" Score="0" ViewCount="501" Body="&lt;p&gt;I have 2018 laptop with i5-8300h and Elementary OS 5. It doesn't suspend on lid close. However if I press button on the screen it suspends normally. I have tried to configure &lt;code&gt;logind.conf&lt;/code&gt; but nothing changed. I also read a lot of different answers with the same questions, but nothing has helped.&lt;/p&gt;&#xA;" OwnerUserId="17031" LastActivityDate="2019-01-22T17:23:02.320" Title="Laptop doesn't suspend on lid close" Tags="|release-juno|suspend|laptop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17928" PostTypeId="1" CreationDate="2019-01-14T18:36:26.410" Score="1" ViewCount="40" Body="&lt;p&gt;I am looking for a Linux distro to install on a new home desktop. Long story short I decided to try with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I am not able to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After booting up from the USB drive the first thing I see is that there is a problem in PCIe Data Link Layer(As far as I see that is connected to almost all Linux distros.) I cannot even try the system or install it... After 5 to 10 seconds it freezes and I need to restart...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have NVIDIA GTX 760 OC 4GB which seems to be the problem. If I am to install my really old GPU a can install an run it but as soon as I run the GTX card it crashes... Before posting here I tried couple of fixes from the internet regarding the grub such as pci = aspm off but none of them worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions will be greatly appreciated&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17035" LastEditorUserId="26" LastEditDate="2019-02-20T02:02:45.800" LastActivityDate="2019-02-20T02:02:45.800" Title="PCIE Data Link Layer error" Tags="|graphic-drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17932" PostTypeId="1" CreationDate="2019-01-15T03:31:00.657" Score="0" ViewCount="207" Body="&lt;p&gt;Is there available an add-on Task-bar indicator to show mounted usb devices and enable safe removal?&lt;/p&gt;&#xA;" OwnerUserId="17040" LastActivityDate="2019-01-15T09:54:37.020" Title="taskbar USB device mount indicator" Tags="|usb|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17933" PostTypeId="2" ParentId="17932" CreationDate="2019-01-15T06:12:40.583" Score="0" Body="&lt;p&gt;Unfortunately there isn't a USB/mount manager for the system tray.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-15T06:12:40.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17934" PostTypeId="1" CreationDate="2019-01-15T08:01:57.627" Score="1" ViewCount="136" Body="&lt;p&gt;My computer freezes completely every now and then.&#xA;I do nothing heavy on resources, plain browsing the internet reading articles.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When system freezes there is NOTHING I can do. Mouse not moving, I cannot call a virtual console, NOTHING.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only solution is the hardware reset button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My configuration is &#xA;120 gb ssd&#xA;gigabyte A320M-s2h&#xA;amd ryzen 3 2200 g (radeon vega 8 mobile grfx)&#xA;8gb memory&lt;/p&gt;&#xA;" OwnerUserId="16571" LastActivityDate="2019-01-15T08:01:57.627" Title="Complete system freeze" Tags="|system|drivers|pantheon|hardware|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="17936" PostTypeId="2" ParentId="17932" CreationDate="2019-01-15T09:54:37.020" Score="1" Body="&lt;p&gt;To expand on Schyken's answer you can find all of the wingpanel indicators made by the elementary team on the Github here: &lt;a href=&quot;https://github.com/elementary?utf8=%E2%9C%93&amp;amp;q=wingpanel&amp;amp;type=&amp;amp;language=&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary?utf8=%E2%9C%93&amp;amp;q=wingpanel&amp;amp;type=&amp;amp;language=&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps you can suggest an indicator in an issue or alternatively just use GNOME which has a &lt;a href=&quot;https://extensions.gnome.org/extension/7/removable-drive-menu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Removable Drive Menu&lt;/a&gt; shell extension.&lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2019-01-15T09:54:37.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17937" PostTypeId="2" ParentId="17162" CreationDate="2019-01-15T12:53:14.470" Score="0" Body="&lt;p&gt;for me ( hp pc ) work this &lt;a href=&quot;https://www.youtube.com/watch?v=H-xb9kBl2P0&quot; rel=&quot;nofollow noreferrer&quot;&gt;enter link description here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r rtl8723be&#xA;&#xA;sudo modprobe rtl8723be ant_sel=2&#xA;&#xA;echo &quot;options rtl8723be ant_sel=2&quot; | sudo tee /etc/modprobe.d/rtl8723-ant-sel.confecho &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17046" LastActivityDate="2019-01-15T12:53:14.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17939" PostTypeId="1" CreationDate="2019-01-15T15:20:39.133" Score="1" ViewCount="2018" Body="&lt;p&gt;I've got the following error(s):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://ro.archive.ubuntu.com/ubuntu bionic InRelease&#xA;Hit:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                         &#xA;Hit:3 http://packages.microsoft.com/repos/vscode stable InRelease                                                                   &#xA;Hit:4 http://security.ubuntu.com/ubuntu bionic-security InRelease                                                                   &#xA;Hit:5 http://ro.archive.ubuntu.com/ubuntu bionic-updates InRelease                                                                  &#xA;Ign:6 http://dl.google.com/linux/chrome/deb stable InRelease                                                                        &#xA;Hit:7 http://packages.elementary.io/appcenter bionic InRelease                                                                      &#xA;Hit:8 http://ro.archive.ubuntu.com/ubuntu bionic-backports InRelease                                                                &#xA;Hit:9 http://ppa.launchpad.net/obsproject/obs-studio/ubuntu bionic InRelease                                                        &#xA;Hit:10 http://dl.google.com/linux/chrome/deb stable Release                                                                         &#xA;Hit:11 https://packages.microsoft.com/ubuntu/18.04/prod bionic InRelease                                                            &#xA;Hit:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                   &#xA;Hit:13 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Hit:14 http://ppa.launchpad.net/ricotz/docky/ubuntu bionic InRelease         &#xA;Hit:15 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease        &#xA;Ign:16 http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic InRelease&#xA;Err:17 http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done &#xA;E: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried accessing the link that had the error, and it is true, there is no &quot;bionic&quot; dist folder. Any fix for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I have fixed it by running &lt;code&gt;sudo add-apt-repository --remove http://ppa.launchpad.net/versable/elementary-update/ubuntu&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17047" LastEditorUserId="16827" LastEditDate="2019-04-12T17:29:06.693" LastActivityDate="2019-04-12T17:29:06.693" Title="Error when running `sudo apt-get update`" Tags="|release-juno|updates|apt|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17940" PostTypeId="2" ParentId="17939" CreationDate="2019-01-15T15:32:10.743" Score="1" Body="&lt;p&gt;I have fixed it by running &lt;code&gt;sudo add-apt-repository --remove http://ppa.launchpad.net/versable/elementary-update/ubuntu&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17047" LastActivityDate="2019-01-15T15:32:10.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17942" PostTypeId="1" AcceptedAnswerId="18061" CreationDate="2019-01-15T16:29:47.483" Score="2" ViewCount="120" Body="&lt;p&gt;If I enable capslock on my US keyboard layout Thinkpad X1 Carbon, the &quot;v&quot; key becomes inoperable; nothing happens when I press it until I disable capslock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the output of &lt;code&gt;xev&lt;/code&gt; when capslock is &lt;em&gt;disabled&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;KeyPress event, serial 38, synthetic NO, window 0x5a00001,&#xA;    root 0x19f, subw 0x0, time 147956195, (90,106), root:(1281,753),&#xA;    state 0x0, keycode 55 (keysym 0x76, v), same_screen YES,&#xA;    XLookupString gives 1 bytes: (76) &quot;v&quot;&#xA;    XmbLookupString gives 1 bytes: (76) &quot;v&quot;&#xA;    XFilterEvent returns: False&#xA;&#xA;KeyRelease event, serial 38, synthetic NO, window 0x5a00001,&#xA;    root 0x19f, subw 0x0, time 147956282, (90,106), root:(1281,753),&#xA;    state 0x0, keycode 55 (keysym 0x76, v), same_screen YES,&#xA;    XLookupString gives 1 bytes: (76) &quot;v&quot;&#xA;    XFilterEvent returns: False&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Normal. With capslock &lt;em&gt;enabled&lt;/em&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;FocusOut event, serial 38, synthetic NO, window 0x5a00001,&#xA;    mode NotifyGrab, detail NotifyAncestor&#xA;&#xA;FocusOut event, serial 38, synthetic NO, window 0x5a00001,&#xA;    mode NotifyUngrab, detail NotifyPointer&#xA;&#xA;FocusIn event, serial 38, synthetic NO, window 0x5a00001,&#xA;    mode NotifyUngrab, detail NotifyAncestor&#xA;&#xA;KeymapNotify event, serial 38, synthetic NO, window 0x0,&#xA;    keys:  2   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   &#xA;           0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   0   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notably, this happens only in X. If I drop out of X11 to a regular terminal (alt+shift+F2, or similar), &quot;V&quot; is normal with capslock enabled, so it's something weird happening in X11 or Pantheon.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-25T20:49:00.753" Title="Why is ElementaryOS not processing the &quot;V&quot; key when capslock is toggled on?" Tags="|keyboard|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17943" PostTypeId="2" ParentId="17544" CreationDate="2019-01-15T21:17:56.157" Score="2" Body="&lt;p&gt;There is a theme available which makes Firefox look more native to elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Zonnev/elementaryos-firefox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Zonnev/elementaryos-firefox&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12115" LastEditorUserId="12115" LastEditDate="2019-03-04T22:21:18.523" LastActivityDate="2019-03-04T22:21:18.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17944" PostTypeId="2" ParentId="17798" CreationDate="2019-01-16T10:01:39.997" Score="1" Body="&lt;p&gt;You shouldn't change to MBR. The best way is to install elementary with a GPT. You can use a tool like Rufus (for Windows) to create a bootable USB that will allow you to install elementary as GPT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you need to enter the UEFI firmware (formerly known as BIOS)  and set the boot mode to UEFI instead of legacy BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: if you want to delete any windows partition you need to boot windows first and then press reboot. This will allow you to edit those partitions.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-01-16T10:01:39.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17948" PostTypeId="2" ParentId="15606" CreationDate="2019-01-16T21:12:41.750" Score="1" Body="&lt;p&gt;The last answer I found from the founder on this question was no. See &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9571/14430&quot;&gt;https://elementaryos.stackexchange.com/a/9571/14430&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I too would love this. They disappear much too fast.&lt;/p&gt;&#xA;" OwnerUserId="14430" LastActivityDate="2019-01-16T21:12:41.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17949" PostTypeId="2" ParentId="16428" CreationDate="2019-01-16T22:16:52.610" Score="1" Body="&lt;p&gt;The issue in your &lt;code&gt;meson.build&lt;/code&gt; file is that some parenthesis are missing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;add_global_arguments('-DGETTEXT_PACKAGE=@0@'.format(meson.project_name()), language:'c')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;should be&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;add_global_arguments('-DGETTEXT_PACKAGE=&quot;@0@&quot;'.format(meson.project_name()), language:'c')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notice: &lt;code&gt;&quot;@0@&quot;&lt;/code&gt;.&#xA;The &lt;code&gt;format&lt;/code&gt; function will replace this with &lt;code&gt;com.github.nwallace.fanboy&lt;/code&gt; because that is your project name.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider what happens, when the macro &lt;code&gt;_&lt;/code&gt; gets expanded.&#xA;This is the relevant error from your log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: ‘com’ undeclared (first use in this function)&#xA;/usr/include/glib-2.0/glib/gi18n-lib.h:30:42: note: in expansion of macro ‘GETTEXT_PACKAGE’&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The macro is defined as:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#define  _(String) ((char *) g_dgettext (GETTEXT_PACKAGE, String))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When &lt;code&gt;GETTEXT_PACKAGE=com.github.nwallace.fanboy&lt;/code&gt; the macro expands to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(String) ((char *) g_dgettext (com.github.nwallace.fanboy, String))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Remember that Vala compiles down to C code and that is what the macro is expanding to. The function &lt;code&gt;g_dgettext&lt;/code&gt; however expects a String as first argument. Because &lt;code&gt;com.github.nwallace.fanboy&lt;/code&gt; is incidentally valid C syntax, you get the &lt;code&gt;error: ‘com’ undeclared&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to wrap the name of your project with &lt;code&gt;&quot;&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14471" LastActivityDate="2019-01-16T22:16:52.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17950" PostTypeId="2" ParentId="16979" CreationDate="2019-01-16T22:44:41.247" Score="1" Body="&lt;p&gt;I've got a Konica Minolta PagePro 1300 w connected to a raspberry pi via USB. On the pi CUPS is running for several years now without any problem. The Konica Minolta PagePro is configured as a shared network printer and can be accessed by any device in my network.&#xA;My Mac instantly discovered the printer and started using it without a problem.&#xA;Recently I upgraded my laptop to juno. Adding this printer to use under juno on my laptop is quite an adventure. I spent hours to get the job done.&#xA;Eventually, I found the solution in the CUPS help page:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From CUPS Server in browser choose &quot;Help&quot; -&gt; &quot;Printer Sharing&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[&lt;a href=&quot;https://localhost:631/help/sharing.html?TOPIC=Getting+Started&amp;amp;QUERY=][1]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://localhost:631/help/sharing.html?TOPIC=Getting+Started&amp;amp;QUERY=][1]&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Manual Configuration of Print Queues&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Note: This method of&#xA;  configuration does not work on macOS 10.7 or later because sandboxed&#xA;  applications do not always have direct network access.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The most tedious method of configuring client machines is to configure&#xA;  each remote queue by hand using the lpadmin(8) command:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;lpadmin -p printer -E -v ipp://server/printers/printer &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The printer name is the name of the printer on the server machine. The &gt; server name is the hostname or IP address of the server machine. &#xA;  Repeat the lpadmin command for each remote printer you wish to use.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Open a terminal session and run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lpadmin -p  -E -v ipp://ip_address:port/printer/name_of_printer_in_CUPS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;chipmunk:~$ lpadmin -p KM_PP1300W -E -v ipp://192.168.3.6:631/printer/KM_PP1300W&lt;/p&gt;&#xA;&#xA;&lt;p&gt;did the trick&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, the graphical interface in juno was of no use at all for me.&lt;/p&gt;&#xA;" OwnerUserId="17064" LastActivityDate="2019-01-16T22:44:41.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17951" PostTypeId="1" AcceptedAnswerId="17954" CreationDate="2019-01-17T11:01:09.177" Score="1" ViewCount="563" Body="&lt;p&gt;Since yesterday nights, there are those updates:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/6Rw9M.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6Rw9M.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;When I go on and update, there is on loop a crashing authentication dialog that shows up:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CS7Dj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CS7Dj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mfb5x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mfb5x.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The two dialogs are flickering super quickly, you cannot enter the password. I also tried to paste the password, but it does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Outputs are as follow:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;edo@XPS:~$ ls -l /usr/lib/policykit-1/polkit-agent-helper-1&#xA;-rwxr-xr-x 1 root root 14328 gen 15 14:18 /usr/lib/policykit-1/polkit-agent-helper-1&#xA;&#xA;edo@XPS:~$ file /usr/lib/policykit-1/polkit-agent-helper-1&#xA;/usr/lib/policykit-1/polkit-agent-helper-1: ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=642077ae71b5ca8f6f12f66f0b92e896adbfc68b, stripped&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the suggested command line, the auth window seems to be fixed. But when I update through AppCenter, I have the following and the update does not start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kxSr9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kxSr9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="16104" LastEditDate="2019-01-17T15:58:58.620" LastActivityDate="2019-10-01T10:45:53.210" Title="On Juno, updates authentication dialog crashes on loop" Tags="|updates|security|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17952" PostTypeId="1" CreationDate="2019-01-17T11:26:37.540" Score="1" ViewCount="1240" Body="&lt;p&gt;Setting determines a keyboard, it't logitech K480. After pressing to connect, it says can't connect. Checked keyboard on other devices pairs ok. &#xA;Same things happen to the bluetooth speakers.&lt;/p&gt;&#xA;" OwnerUserId="17068" LastEditorUserId="16872" LastEditDate="2019-01-25T05:45:56.430" LastActivityDate="2019-06-24T11:02:25.310" Title="Can't connect a Bluetooth keyboard" Tags="|keyboard|bluetooth|" AnswerCount="1" CommentCount="1" ClosedDate="2019-06-24T20:12:14.180" ContentLicense="CC BY-SA 4.0" />
  <row Id="17953" PostTypeId="2" ParentId="17952" CreationDate="2019-01-17T13:16:28.477" Score="0" Body="&lt;p&gt;Solved problem by myself. installed other bluetooth managing app from appcenter. Up and running. &lt;/p&gt;&#xA;" OwnerUserId="17068" LastActivityDate="2019-01-17T13:16:28.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17954" PostTypeId="2" ParentId="17951" CreationDate="2019-01-17T15:26:04.767" Score="2" Body="&lt;p&gt;On my Juno system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;→ ls -l /usr/lib/policykit-1/polkit-agent-helper-1 &#xA;-rwsr-xr-x 1 root root 14328 gen 15 14:18 /usr/lib/policykit-1/polkit-agent-helper-1&#xA;&#xA;→ file /usr/lib/policykit-1/polkit-agent-helper-1 &#xA;/usr/lib/policykit-1/polkit-agent-helper-1: setuid ELF 64-bit LSB shared object, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 3.2.0, BuildID[sha1]=642077ae71b5ca8f6f12f66f0b92e896adbfc68b, stripped&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as you can see the executable &lt;code&gt;polkit-agent-helper-1&lt;/code&gt; has the setuid bit set:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-rwsr-xr-x &amp;lt;-- the &quot;s&quot; in &quot;rws&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/lib/policykit-1/polkit-agent-helper-1: setuid ELF 64-bit LSB shared object &amp;lt;-- file aknowledges the executable has the setuid bit set&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Looks like on your system the seuid bit &quot;got lost&quot;, as the first error shown on your screenshots correctly reports.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A fast workaround is to give the setuid bit explicitly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo chmod u+s /usr/lib/policykit-1/polkit-agent-helper-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That said, you should investigate on &lt;em&gt;why&lt;/em&gt; the setuid bit was removed as usually it's not something that &quot;disappears&quot; on itself.&lt;/p&gt;&#xA;" OwnerUserId="12279" LastActivityDate="2019-01-17T15:26:04.767" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="17956" PostTypeId="1" AcceptedAnswerId="17960" CreationDate="2019-01-17T22:20:27.990" Score="2" ViewCount="256" Body="&lt;p&gt;I wish to remove everything from the music app to start fresh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I couldn’t find a way other than deleting each song individually but my library is rather large so that’s not an option. &lt;/p&gt;&#xA;" OwnerUserId="17073" LastActivityDate="2019-01-29T07:06:34.140" Title="How to reset io.elementary.music library in Juno" Tags="|music|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17957" PostTypeId="2" ParentId="16803" CreationDate="2019-01-18T03:08:09.937" Score="1" Body="&lt;p&gt;With Elementary OS's Juno release, this option is conveniently placed in the System Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Navigation: Setting -&gt; Desktop -&gt; Dock&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once at this location, the Dock behaviour controls are Icon Size, &lt;strong&gt;Hide When&lt;/strong&gt; and Pressure Reveal. The &lt;strong&gt;Hide When&lt;/strong&gt; control also has a toggle. If the toggle is set to &lt;strong&gt;OFF&lt;/strong&gt;, the dock stays locked in its position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kdPlj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kdPlj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/y3it7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y3it7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17074" LastActivityDate="2019-01-18T03:08:09.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17958" PostTypeId="1" CreationDate="2019-01-18T03:48:11.983" Score="1" ViewCount="847" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/5U3Uw.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I just installed elementary 5.0 on my MacBook Air (2017), from a Flash Drive, and while the network connection seemed to work perfectly during installation, and while it saved the network info regardless, now that it’s installed and rebooted it doesn’t seem to want to connect to it whatsoever. As you can see from the pic when I open the network settings the connection shows up, and when I open it and go to the general tab the “automatically connect to this network when it is available” is checked off but it doesn’t seem to be actually connecting? Is this a simple driver issue or is there something I’m missing? Cause as I said I’m pretty sure I was connected through the installation process but now all of a sudden it’s just chillen and not really doing anything for me :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It’s late so if I don’t reply to any posts or questions soon, I’m just sleeping and will reply ASAP in the morning.&lt;/p&gt;&#xA;" OwnerUserId="17075" LastActivityDate="2019-01-23T15:13:31.763" Title="WiFi issues on 2017 MacBook Air" Tags="|wifi|networking|macbook|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-17T13:23:48.620" ContentLicense="CC BY-SA 4.0" />
  <row Id="17959" PostTypeId="1" CreationDate="2019-01-18T04:35:45.313" Score="0" ViewCount="83" Body="&lt;p&gt;My Logitech C922 Webcam worked fine on Juno but is unrecognized on Loki. Installing chees did not help, and Logitech's site offers no Linux drivers. Thought there might be an open source driver available somewhere, but googling around produced no useful info. Looking for advice on finding a driver or, failing that, advice on what HD webcam will be recognized by Loki.&lt;/p&gt;&#xA;" OwnerUserId="17077" LastEditorUserId="16827" LastEditDate="2019-01-23T15:24:49.987" LastActivityDate="2019-06-23T15:03:25.410" Title="Logitech C922 1080 HD webcam unrecognized" Tags="|webcam|" AnswerCount="1" CommentCount="0" ClosedDate="2019-06-24T20:16:36.217" ContentLicense="CC BY-SA 4.0" />
  <row Id="17960" PostTypeId="2" ParentId="17956" CreationDate="2019-01-18T05:20:45.537" Score="2" Body="&lt;p&gt;In Terminal do &lt;code&gt;rm .local/share/noise/database_0_3_2.db&lt;/code&gt;&#xA;That will delete the database where Noise keeps the library info&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-01-18T05:20:45.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17961" PostTypeId="1" CreationDate="2019-01-18T08:21:33.540" Score="2" ViewCount="88" Body="&lt;p&gt;There is no possibility to fully use the file manager with the Russian language in the system. When copying folders, the program closes. There is a &lt;a href=&quot;https://github.com/elementary/files/issues/464&quot; rel=&quot;nofollow noreferrer&quot;&gt;ticket&lt;/a&gt; on github, but it is closed. It seems to be a problem with the translation. But the problem is still not fixed. Where else can you go for help? I really like Juno, but it’s impossible to use it because I can't copy folders.&lt;/p&gt;&#xA;" OwnerUserId="15038" LastActivityDate="2019-06-24T13:03:35.420" Title="Files crash when copy and paste not empty folder with russian language in Juno" Tags="|pantheon-files|" AnswerCount="1" CommentCount="2" ClosedDate="2019-06-24T20:11:49.987" ContentLicense="CC BY-SA 4.0" />
  <row Id="17962" PostTypeId="2" ParentId="445" CreationDate="2019-01-18T11:41:27.000" Score="3" Body="&lt;p&gt;This is now built into elementary OS 5 Juno. Just press the Windows or Super key.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2019-01-18T11:41:27.000" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17964" PostTypeId="1" CreationDate="2019-01-18T15:31:52.813" Score="2" ViewCount="48" Body="&lt;p&gt;I encounter many bugs regarding my dual monitor setup. Somehow I can't turn off my laptop display in settings. When I turn off my laptop display it something glitches and then there are no changes. It's annoying. Can someone take a look at this? &lt;/p&gt;&#xA;" OwnerUserId="17080" LastActivityDate="2019-01-18T15:31:52.813" Title="Dual monitor setup issues" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17965" PostTypeId="2" ParentId="17958" CreationDate="2019-01-18T15:59:59.107" Score="1" Body="&lt;p&gt;Elementary requires a driver for most Broadcom WiFi chips, like those in Macbooks. All you have to do is establish a temporary network connection with Ethernet or a USB WiFi adapter and run &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="16939" LastActivityDate="2019-01-18T15:59:59.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17966" PostTypeId="1" CreationDate="2019-01-18T21:33:10.137" Score="1" ViewCount="395" Body="&lt;p&gt;&lt;strong&gt;Background&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running a dual-monitor setup: primary on Nvidia GPU and secondary on Intel integrated (because it's VGA only) and I'm been having screen tearing issues on my primary and secondary monitor. To fix this I found that I can enable &lt;code&gt;ForceCompositionPipeline=On, ForceFullCompositionPipeline=On&lt;/code&gt; in my /etc/X11/xorg.conf settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This fixed my screen tearing issues but made my secondary monitor go black with no ability to even cross my mouse pointer over it, ie. not recognized I guess. I fixed this issues by manually adding my secondary monitors PCI BusID to the same xorg.conf file like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier &quot;intel&quot;&#xA;    Driver &quot;i915&quot;&#xA;    BusID &quot;PCI:0:2:0&quot;&#xA;    Option &quot;AccelMethod&quot; &quot;SNA&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Screen&quot;&#xA;    Identifier &quot;intel&quot;&#xA;    Device &quot;intel&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem&lt;/strong&gt; &#xA;My seconday monitor is again working but my primary monitor connected to my Nvidia GPU is black, however I can still move my mouse pointer over to it and my top panel still launch on it even though I can't see it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Full xorg.conf:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# nvidia-settings: X configuration file generated by nvidia-settings# nvidia-settings:  version 415.25&#xA;&#xA;Section &quot;ServerLayout&quot;&#xA;    Identifier     &quot;Layout0&quot;&#xA;    Screen      0  &quot;Screen0&quot; 0 0&#xA;    Screen         1  &quot;intel&quot;&#xA;    InputDevice    &quot;Keyboard0&quot; &quot;CoreKeyboard&quot;&#xA;    InputDevice    &quot;Mouse0&quot; &quot;CorePointer&quot;&#xA;    Option         &quot;Xinerama&quot; &quot;0&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Files&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Module&quot;&#xA;    Load           &quot;dbe&quot;&#xA;    Load           &quot;extmod&quot;&#xA;    Load           &quot;type1&quot;&#xA;    Load           &quot;freetype&quot;&#xA;    Load           &quot;glx&quot;&#xA;EndSection&#xA;&#xA;Section &quot;InputDevice&quot;&#xA;    # generated from default&#xA;    Identifier     &quot;Mouse0&quot;&#xA;    Driver         &quot;mouse&quot;&#xA;    Option         &quot;Protocol&quot; &quot;auto&quot;&#xA;    Option         &quot;Device&quot; &quot;/dev/psaux&quot;&#xA;    Option         &quot;Emulate3Buttons&quot; &quot;no&quot;&#xA;    Option         &quot;ZAxisMapping&quot; &quot;4 5&quot;&#xA;EndSection&#xA;&#xA;Section &quot;InputDevice&quot;&#xA;    # generated from default&#xA;    Identifier     &quot;Keyboard0&quot;&#xA;    Driver         &quot;kbd&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Monitor&quot;&#xA;    # HorizSync source: edid, VertRefresh source: edid&#xA;    Identifier     &quot;Monitor0&quot;&#xA;    VendorName     &quot;Unknown&quot;&#xA;    ModelName      &quot;DELL U2312HM&quot;&#xA;    HorizSync       30.0 - 83.0&#xA;    VertRefresh     56.0 - 76.0&#xA;    Option         &quot;DPMS&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Device&quot;&#xA;    Identifier     &quot;Device0&quot;&#xA;    Driver         &quot;nvidia&quot;&#xA;    VendorName     &quot;NVIDIA Corporation&quot;&#xA;    BoardName      &quot;GeForce GTX 970&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Screen&quot;&#xA;    Identifier     &quot;Screen0&quot;&#xA;    Device         &quot;Device0&quot;&#xA;    Monitor        &quot;Monitor0&quot;&#xA;    DefaultDepth    24&#xA;    Option         &quot;Stereo&quot; &quot;0&quot;&#xA;    Option         &quot;nvidiaXineramaInfoOrder&quot; &quot;DFP-0&quot;&#xA;    Option         &quot;metamodes&quot; &quot;nvidia-auto-select +1280+0 {ForceCompositionPipeline=On, ForceFullCompositionPipeline=On}&quot;&#xA;    Option         &quot;SLI&quot; &quot;Off&quot;&#xA;    Option         &quot;MultiGPU&quot; &quot;Off&quot;&#xA;    Option         &quot;BaseMosaic&quot; &quot;off&quot;&#xA;    SubSection     &quot;Display&quot;&#xA;        Depth       24&#xA;    EndSubSection&#xA;EndSection&#xA;&#xA;Section &quot;Device&quot;&#xA;    Identifier &quot;intel&quot;&#xA;    Driver &quot;i915&quot;&#xA;    BusID &quot;PCI:0:2:0&quot;&#xA;    Option &quot;AccelMethod&quot; &quot;SNA&quot;&#xA;EndSection&#xA;&#xA;Section &quot;Screen&quot;&#xA;    Identifier &quot;intel&quot;&#xA;    Device &quot;intel&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;xrandr output&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 3200 x 1080, maximum 16384 x 16384&#xA;DVI-I-0 disconnected (normal left inverted right x axis y axis)&#xA;DVI-I-1 connected primary 1920x1080+1280+0 (normal left inverted right x axis y axis) 510mm x 287mm&#xA;   1920x1080     60.00*+&#xA;   1280x1024     75.02    60.02  &#xA;   1152x864      75.00  &#xA;   1024x768      75.03    60.00  &#xA;   800x600       75.00    60.32  &#xA;   640x480       75.00    59.94  &#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;DP-0 disconnected (normal left inverted right x axis y axis)&#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;DVI-D-0 disconnected (normal left inverted right x axis y axis)&#xA;VGA-1-1 connected 1280x1024+0+32 (normal left inverted right x axis y axis) 338mm x 270mm&#xA;   1280x1024     60.02*+  75.02  &#xA;   1152x864      75.00  &#xA;   1024x768      75.03    70.07    60.00  &#xA;   832x624       74.55  &#xA;   800x600       72.19    75.00    60.32  &#xA;   640x480       75.00    72.81    59.94  &#xA;   720x400       70.08  &#xA;HDMI-1-1 disconnected (normal left inverted right x axis y axis)&#xA;DP-1-1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-1-2 disconnected (normal left inverted right x axis y axis)&#xA;DP-1-2 disconnected (normal left inverted right x axis y axis)&#xA;  1280x1024 (0x48) 108.000MHz +HSync +VSync&#xA;        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz&#xA;        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz&#xA;  1280x1024 (0x49) 135.000MHz +HSync +VSync&#xA;        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock  79.98KHz&#xA;        v: height 1024 start 1025 end 1028 total 1066           clock  75.02Hz&#xA;  1152x864 (0x4a) 108.000MHz +HSync +VSync&#xA;        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock  67.50KHz&#xA;        v: height  864 start  865 end  868 total  900           clock  75.00Hz&#xA;  1024x768 (0x4b) 78.750MHz +HSync +VSync&#xA;        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock  60.02KHz&#xA;        v: height  768 start  769 end  772 total  800           clock  75.03Hz&#xA;  1024x768 (0x4d) 65.000MHz -HSync -VSync&#xA;        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz&#xA;        v: height  768 start  771 end  777 total  806           clock  60.00Hz&#xA;  800x600 (0x50) 49.500MHz +HSync +VSync&#xA;        h: width   800 start  816 end  896 total 1056 skew    0 clock  46.88KHz&#xA;        v: height  600 start  601 end  604 total  625           clock  75.00Hz&#xA;  800x600 (0x51) 40.000MHz +HSync +VSync&#xA;        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz&#xA;        v: height  600 start  601 end  605 total  628           clock  60.32Hz&#xA;  640x480 (0x52) 31.500MHz -HSync -VSync&#xA;        h: width   640 start  656 end  720 total  840 skew    0 clock  37.50KHz&#xA;        v: height  480 start  481 end  484 total  500           clock  75.00Hz&#xA;  640x480 (0x54) 25.175MHz -HSync -VSync&#xA;        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz&#xA;        v: height  480 start  490 end  492 total  525           clock  59.94Hz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://paste.ubuntu.com/p/QpZwRB4662/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here is xorg.log from boot&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17082" LastActivityDate="2019-01-18T21:33:10.137" Title="Dual-monitor nvidia-intel hybrid Xorg black screen" Tags="|display|nvidia|intel|xorg|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17967" PostTypeId="2" ParentId="16700" CreationDate="2019-01-19T06:16:18.893" Score="-1" Body="&lt;p&gt;You have to go to the &lt;a href=&quot;http://chrome://settings/system&quot; rel=&quot;nofollow noreferrer&quot;&gt;Chrome Settings -&gt; System&lt;/a&gt; (&lt;code&gt;chrome://settings/system&lt;/code&gt;) and disable hardware acceleration. &lt;/p&gt;&#xA;" OwnerUserId="16764" LastActivityDate="2019-01-19T06:16:18.893" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17969" PostTypeId="1" CreationDate="2019-01-19T09:00:02.327" Score="1" ViewCount="100" Body="&lt;p&gt;A while ago, for some reason my ethernet stopped working.&#xA;Wifi does work.&#xA;Can anyobody please help?&#xA;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;lshw -c NET&#xA;  WARNING: you should run this program as super-user.&#xA;    *-network&lt;br&gt;&#xA;         description: Wireless interface&#xA;         product: AR9285 Wireless Network Adapter (PCI-Express)&#xA;         vendor: Qualcomm Atheros&#xA;         physical id: 0&#xA;         bus info: pci@0000:03:00.0&#xA;         logical name: wlp3s0&#xA;         version: 01&#xA;         serial: 88:9f:fa:16:ac:50&#xA;         width: 64 bits&#xA;         clock: 33MHz&#xA;         capabilities: bus_master cap_list ethernet physical wireless&#xA;         configuration: broadcast=yes driver=ath9k driverversion=4.15.0-43-generic firmware=N/A ip=192.168.1.110 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;         resources: irq:16 memory:fc700000-fc70ffff&#xA;    *-network&#xA;         description: Ethernet interface&#xA;         product: Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB]&#xA;         vendor: Marvell Technology Group Ltd.&#xA;         physical id: 0&#xA;         bus info: pci@0000:07:00.0&#xA;         logical name: enp7s0&#xA;         version: 11&#xA;         serial: e8:11:32:07:89:21&#xA;         capacity: 1Gbit/s&#xA;         width: 64 bits&#xA;         clock: 33MHz&#xA;         capabilities: bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;         configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 latency=0 link=no multicast=yes port=twisted pair&#xA;         resources: irq:24 memory:fc800000-fc803fff ioport:5000(size=256) memory:fc820000-fc83ffff&#xA;  WARNING: output may be incomplete or inaccurate, you should run this program as super-user.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17088" LastActivityDate="2019-01-19T09:00:02.327" Title="My Ethernet connection isn't working in Loki" Tags="|ethernet|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17970" PostTypeId="1" CreationDate="2019-01-19T11:22:16.510" Score="0" ViewCount="1931" Body="&lt;p&gt;I have installed elementary OS &lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt; one week ago and i tried to enable night light but its not working, even in manual or sunset ~ sunrise time.&#xA;how can i fix it ? did anyone else get this weird problem?&lt;/p&gt;&#xA;" OwnerUserId="17087" LastEditorUserId="16827" LastEditDate="2019-01-23T13:51:56.130" LastActivityDate="2019-02-08T18:25:57.963" Title="Night Light Is Not Working" Tags="|release-juno|lenovo|nightlight|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17971" PostTypeId="1" CreationDate="2019-01-19T12:55:40.540" Score="0" ViewCount="417" Body="&lt;p&gt;Just checking to see if there is a recent distro for elementary os to load on the Pi 3B&lt;/p&gt;&#xA;" OwnerUserId="17089" LastActivityDate="2019-02-19T04:03:35.393" Title="elementary os being built for RasPi?" Tags="|elementary-website|elementary-project|" AnswerCount="1" CommentCount="0" ClosedDate="2019-02-20T02:06:57.047" ContentLicense="CC BY-SA 4.0" />
  <row Id="17972" PostTypeId="2" ParentId="17970" CreationDate="2019-01-19T14:54:03.650" Score="1" Body="&lt;p&gt;Try this: &#xA;Wingpanel Nightlight Indicator&#xA;&lt;a href=&quot;https://i.stack.imgur.com/HMmn8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HMmn8.png&quot; alt=&quot;Wingpanel Nightlight Indicator&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-nightlight&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-nightlight&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17090" LastActivityDate="2019-01-19T14:54:03.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17974" PostTypeId="1" CreationDate="2019-01-19T15:30:33.170" Score="3" ViewCount="1237" Body="&lt;p&gt;I have a dell inspiron 3542 with Juno as my OS and sometimes volume keys don't work.. My laptop doesn't have the dedicated volume buttons but it's usually, F1 for mute, F2 for reducing volume and F3 for increasing volume. It usually works but sometimes after I boot my system they don't work I have to reboot my laptop for it to work again also it works if I log out and login again. If it's relevant then for brightness it's F11 and F12 they work fine with no issue at all. Is this a known issue? Was this reported already? Or is it my laptop?&lt;/p&gt;&#xA;" OwnerUserId="17091" LastEditorUserId="17091" LastEditDate="2019-01-19T15:42:17.753" LastActivityDate="2019-02-18T20:01:40.320" Title="Volume controls on function keys don't work" Tags="|release-juno|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17976" PostTypeId="1" CreationDate="2019-01-19T18:00:35.140" Score="4" ViewCount="296" Body="&lt;p&gt;If I place my computer in &quot;suspend&quot;, whatever application that juno is running will freeze upon waking from suspend. Strangely, If I let juno suspend on timeout, without intervention, the application works fine upon waking. The bug only appears when I place the computer in suspend manually. &lt;/p&gt;&#xA;" OwnerUserId="17094" LastActivityDate="2019-10-01T18:03:35.573" Title="Freeze after resumption from suspend" Tags="|suspend|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17977" PostTypeId="2" ParentId="17974" CreationDate="2019-01-19T19:06:27.950" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install dconf-editor:&#xA;&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;code&gt;org &amp;gt; gnome &amp;gt; settings-daemon &amp;gt; plugins &amp;gt; media-keys&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Find the keys that don't work and set them to their default value checking the &lt;code&gt;Use default value&lt;/code&gt; option (if they are already in default value uncheck it and check it again):&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uybdF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uybdF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Apply changes and keys now work!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2019-01-19T19:06:27.950" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17978" PostTypeId="1" CreationDate="2019-01-19T20:38:57.717" Score="1" ViewCount="306" Body="&lt;p&gt;I didn't get any 720p youtube videos in Epiphany and no streaming videos at fresh install. The I installed &lt;code&gt;gstreamer1.0-plugins-bad&lt;/code&gt; and most videos/streaming work, but on youtube only some videos play at 720p, some only at 360p (and those are available at 720p, I checked with Firefox and Chrome). Is there another solution for this? I remember in Loki/Freya I installed flash for this, but I don't want to do that anymore. &lt;br&gt;&#xA;P.S.: Don't send me to Epiphany's gitlab, I've already checked. I'm asking it here because I presume the majority of Epiphany users are on eOS.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2019-04-18T15:04:21.547" Title="Solution to make all videos properly work in Epyphany" Tags="|release-juno|epiphany|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17979" PostTypeId="2" ParentId="16788" CreationDate="2019-01-19T22:27:13.997" Score="1" Body="&lt;p&gt;I figured out a way to fix this, but you need dual boot to windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First pair your Precision Mouse to Ubuntu. It doesnt matter if it works or not.&#xA;Then reboot to windows and pair as usual.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that reboot to ubuntu and run this python script.&#xA;&lt;a href=&quot;https://gist.github.com/Mygod/f390aabf53cf1406fc71166a47236ebf&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/Mygod/f390aabf53cf1406fc71166a47236ebf&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to run it like this &lt;code&gt;python3 ./script.py -s /media/carlos/90C24FB4C24F9D7A/Windows/System32/config/SYSTEM&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case &lt;code&gt;/media/carlos/90C24FB4C24F9D7A/&lt;/code&gt; is pointing to my mount directory of my windows partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, the script will create a folder inside your home directory called bluetooth, with a folder with the name of the mac address of your bluetooth adapter and inside that folder there will be folders of each of your bluetooth low energy device. In my case the folder corresponding to the precision mouse is &lt;code&gt;E0:52:2A:96:D2:81&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now open a new files window as admin. You can do this by right clicking the files shortcut on your dock or on the application menu on the wingpanel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then navigate to &lt;code&gt;/var/lib/bluetooth/AdapterAddress/&lt;/code&gt;. There you should find a folder with very similar name to the folder created by the script. In my case it was&#xA;&lt;code&gt;E0:52:29:96:D2:81&lt;/code&gt;. Note that the difference is &lt;code&gt;29&lt;/code&gt; instead of &lt;code&gt;2A&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you should be able to drag and drop the folder created by the script to the &lt;code&gt;/var/lib/bluetooth/AdapterAddress/&lt;/code&gt; directory, and then open the original folder that was created by ubuntu, in my case &lt;code&gt;E0:52:29:96:D2:81&lt;/code&gt; and copy the attributes file into the newly dragged folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if you don't have a windows partition and see if I can manage to make it work without Windows.&lt;/p&gt;&#xA;" OwnerUserId="15005" LastActivityDate="2019-01-19T22:27:13.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17980" PostTypeId="2" ParentId="17971" CreationDate="2019-01-20T03:13:34.950" Score="0" Body="&lt;p&gt;I don't think so, there has been nothing about a Pi image on the eos website or twitter account.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-01-20T03:13:34.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17981" PostTypeId="2" ParentId="17925" CreationDate="2019-01-20T08:08:50.327" Score="0" Body="&lt;p&gt;I think you have some top panel indicator application which is stacked to load the timeout is exactly 60 sec. So then it failed is release the loading of your desktop.&lt;/p&gt;&#xA;" OwnerUserId="359" LastActivityDate="2019-01-20T08:08:50.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17982" PostTypeId="2" ParentId="17864" CreationDate="2019-01-20T09:52:43.290" Score="2" Body="&lt;p&gt;Have the same issue on Dell XPS 15 even with much newer Nvidia Driver, as workaround switched to Inter Graphic card. Only on Inter Suspend and Resume work good. Waiting for nvidia bug fix.&lt;/p&gt;&#xA;" OwnerUserId="359" LastActivityDate="2019-01-20T09:52:43.290" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17984" PostTypeId="1" CreationDate="2019-01-20T14:05:32.347" Score="1" ViewCount="52" Body="&lt;p&gt;Hello I'm a new user of elementary os. It is a beautiful OS, maybe the best in my opinion, but I have a little problem with the pointer when I use it with touchpad. &#xA;For example when I place the pointer on the X of close, the pointer moves involuntarily. This problem is reapeted since I have installed the OS, on all parts of the display.&#xA;I have a Fujitsu Lifebook. &#xA;Can anyone help me, please? Thanks for the attention.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS- sorry for the language but I'm not english. I hope you can understand me&lt;/p&gt;&#xA;" OwnerUserId="17100" LastActivityDate="2019-01-20T14:05:32.347" Title="Problem with touchpad pointer" Tags="|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17985" PostTypeId="1" CreationDate="2019-01-20T15:02:01.877" Score="2" ViewCount="1387" Body="&lt;p&gt;I just bought a new dell XPS 13 for work and everything is working smoothly except the external monitor and it's pretty annoying to be tied to the small 13 inch display&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I bought an usb C to HDMI cable with thunderbolt 3 support, tested it with my phone and it works on my hdmi screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but when I plug my laptop I have no signal message &lt;/p&gt;&#xA;&#xA;&lt;p&gt;when I run &lt;code&gt;lspci -tv&lt;/code&gt; with the display plugged, I got : &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;+-1c.4-[03-6d]----00.0-[04-6d]--+-00.0-[05]--&#xA;             |                               +-01.0-[06-38]--&#xA;             |                               +-02.0-[39]----00.0  Intel Corporation JHL6540 Thunderbolt 3 USB Controller (C step) [Alpine Ridge 4C 2016]&#xA;             |                               -04.0-[3a-6d]--&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;when I run &lt;code&gt;xrandr -q&lt;/code&gt; I have &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 8192 x 8192&#xA;  eDP-1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 294mm x 165mm&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;DP-1 disconnected (normal left inverted right x axis y axis)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;DP-2 disconnected (normal left inverted right x axis y axis)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;any clue on how to get external display working ?&lt;/p&gt;&#xA;" OwnerUserId="17102" LastEditorUserId="16827" LastEditDate="2019-01-24T08:36:51.757" LastActivityDate="2019-06-23T10:02:25.300" Title="USB C DP Alt Mode external monitor" Tags="|display|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="17986" PostTypeId="2" ParentId="16833" CreationDate="2019-01-20T18:18:23.763" Score="0" Body="&lt;p&gt;I think it is related to gtk3 with eclipse. If you force it to use gtk2 it works. Had a similar issue with dbeaver which is eclipse based.&lt;/p&gt;&#xA;" OwnerUserId="17104" LastActivityDate="2019-01-20T18:18:23.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17987" PostTypeId="1" CreationDate="2019-01-20T19:14:01.090" Score="2" ViewCount="222" Body="&lt;p&gt;This is a minor issue and I am unsure how to fix it. Sometimes when I boot back up from standby mode, the screen turns on at full brightness. When I press the key combination to lower the brightness, the brightness popover thinks the brightness is at its lowest value, and it does not let me lower the brightness. I have to first press the brightness increase key combination &lt;em&gt;then&lt;/em&gt; start lowering the brightness again. Is there a fix for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a Dell E6410 laptop with automatic brightness disabled. I'm running on 0.4.1 Loki. Would it be fixed if I upgrade to Juno?&lt;/p&gt;&#xA;" OwnerUserId="15443" LastActivityDate="2019-01-20T19:14:01.090" Title="Elementary &quot;loses track&quot; of the screen brightness after standby" Tags="|release-loki|brightness|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="17988" PostTypeId="2" ParentId="17177" CreationDate="2019-01-20T19:41:49.957" Score="2" Body="&lt;p&gt;I have same problem and i was manage to find solution for one part of the problem. That is you need root access to vmware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simple open terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vmplayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or i find beater solution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pkexec --user milos env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY /usr/bin/vmplayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but i dont know how to put this command in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/vmware-player.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;when i do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=pkexec --user milos env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY /usr/bin/vmplayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;instead of:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/usr/bin/vmplayer %U&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;program wont run.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my question is how to automate process and put command in application shortcut, i am seeking for elegant solution ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Grate thanks to @kbknapp for completing solution i provide. Once again Thank You mate ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And of course just to add some revise on hes solution.&#xA;If you use vmplayer like you, you need to edit &lt;code&gt;/usr/share/polkit-1/actions/com.vmware.Workstation.policy&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;annotate key=&quot;org.freedesktop.policykit.exec.path&quot;&amp;gt;/usr/bin/vmware&amp;lt;/annotate&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to look like &#xA;/usr/bin/vmplayer&#xA;&#xA;&lt;p&gt;and on the end to make vmware-exec executable:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /usr/bin/vmware-exec&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And thats it ;)&lt;/p&gt;&#xA;" OwnerUserId="15493" LastEditorUserId="15493" LastEditDate="2019-01-22T23:04:34.390" LastActivityDate="2019-01-22T23:04:34.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17989" PostTypeId="1" CreationDate="2019-01-20T21:08:23.133" Score="2" ViewCount="1438" Body="&lt;p&gt;My two WiFi printers show up but are listed as &quot;Disabled&quot;.  I cannot find any way to enable them.  Any suggestions?  They work perfectly on my Linux Mint laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/xfbsH.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="17097" LastEditorUserId="16827" LastEditDate="2019-01-23T15:14:43.223" LastActivityDate="2021-12-26T19:37:58.420" Title="WiFi Printers All Disabled?" Tags="|wifi|printer|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="17990" PostTypeId="1" CreationDate="2019-01-20T23:32:59.393" Score="1" ViewCount="72" Body="&lt;p&gt;If a start scrolling on an application in one workspace/desktop and then use the &lt;code&gt;super + rightarrow&lt;/code&gt; to switch another workspace that has an application with scrollable content, the scrolling continues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this is a bug and I'd be interested to hear how to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o6kJp.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o6kJp.gif&quot; alt=&quot;Here&amp;#39;s a reproduction of the bug.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6861" LastActivityDate="2019-10-22T23:01:55.240" Title="Scrolling continues across workspaces" Tags="|release-juno|desktop|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17991" PostTypeId="1" CreationDate="2019-01-21T03:10:56.523" Score="0" ViewCount="85" Body="&lt;p&gt;Just repetitively touching a menu e.g. the power button on the wingpanel and touching somewhere else on the screen causes translation of the wingpanel. I can reset the position by running &lt;code&gt;killall wingpanel&lt;/code&gt;, but I think this is a bug. I'd be interested to know how to fix it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VDBut.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VDBut.jpg&quot; alt=&quot;Reproduction of the error.&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt; This was fixed in &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/227&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/pull/227&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6861" LastEditorUserId="6861" LastEditDate="2020-06-30T03:36:35.680" LastActivityDate="2024-03-11T12:07:00.877" Title="Wingpanel translates with touches" Tags="|release-juno|wingpanel|touchscreen|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17992" PostTypeId="2" ParentId="3712" CreationDate="2019-01-21T09:11:44.703" Score="0" Body="&lt;p&gt;To get rid of the title bar &lt;em&gt;and&lt;/em&gt; to make Mozilla Firefox look more native to elementary OS with properly placed window and tab buttons etc. do the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Uncheck the Title Bar option from the Customise menu inside Mozilla Firefox. (The one with the paintbrush icon.)&lt;/li&gt;&#xA;&lt;li&gt;Install the following theme: &lt;a href=&quot;https://github.com/harveycabaguio/firefox-elementary-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/harveycabaguio/firefox-elementary-theme&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Restart Mozilla Firefox.&lt;/li&gt;&#xA;&lt;li&gt;Optionally further fine-tune the user interface from the Customise menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2019-01-21T09:11:44.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17993" PostTypeId="2" ParentId="10813" CreationDate="2019-01-21T10:04:34.293" Score="0" Body="&lt;p&gt;Upgrading to granite0.5 has solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2019-01-21T10:04:34.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17994" PostTypeId="2" ParentId="7427" CreationDate="2019-01-21T10:05:47.700" Score="0" Body="&lt;p&gt;I rewrote the code with my own parser for epub and using webkit2gtk-4.0 and the problem seems to be resolved.&#xA;&lt;a href=&quot;https://github.com/babluboy/bookworm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/babluboy/bookworm&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="613" LastActivityDate="2019-01-21T10:05:47.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17995" PostTypeId="1" AcceptedAnswerId="17999" CreationDate="2019-01-21T15:38:05.323" Score="0" ViewCount="210" Body="&lt;p&gt;Subtitles still don't appear to work in the video player, I have read the other two questions on this site, but neither have a fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using an external srt subtitle file that works on windows using VLC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Developers: Please take a look at the question here for more details (and a bounty) &lt;a href=&quot;https://stackoverflow.com/questions/48957527/cluttergst-only-shows-external-subtitles-if-same-filename-as-video-file&quot;&gt;https://stackoverflow.com/questions/48957527/cluttergst-only-shows-external-subtitles-if-same-filename-as-video-file&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5871" LastEditorUserId="5871" LastEditDate="2019-01-22T17:01:24.460" LastActivityDate="2019-01-29T07:04:18.493" Title="Subtitles in Video Player" Tags="|release-juno|video-player|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="17996" PostTypeId="2" ParentId="16833" CreationDate="2019-01-21T16:02:17.970" Score="3" Body="&lt;p&gt;This is a &lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;known issue in Elementary OS&lt;/a&gt; due to their somewhat non-standard way of applying window decorations. Fortunately, there is a fix, but it must be applied on a per-application basis. In fact on the issue description itself on GitHub, there's a summary of how to fix it with &lt;a href=&quot;https://github.com/elementary/gala/issues/244#issuecomment-452695835&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eclipse as a sample&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;For those wondering how to change the .desktop file appropriately, set:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env GTK_CSD=0 &amp;lt;executable path&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For example for Eclipse I did this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env GTK_CSD=0 /opt/eclipse/eclipse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So you'll want to edit the eclipse desktop file to add that &lt;code&gt;GTK_CSD=0&lt;/code&gt; as an environment variable added before Eclipse executes.&lt;/p&gt;&#xA;&lt;p&gt;You could also probably use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;App Editor&lt;/a&gt; to do the same, if you prefer a GUI.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-01-21T16:02:17.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17997" PostTypeId="1" CreationDate="2019-01-21T16:21:01.290" Score="0" ViewCount="368" Body="&lt;p&gt;I connected my Android phone (an xperia z5 (android nougat 7.1.1)) in elementary OS Juno. However, when I attempt to open files on the device using the Files application, I get the following error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Cannot open file with this protocol (mtp)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This happens regardless of file type (jpg, mp3, etc).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="17114" LastEditorUserId="18048" LastEditDate="2019-05-07T09:09:03.070" LastActivityDate="2019-05-07T09:09:03.070" Title="How can I add MPT support to elementary OS to read files from an Android phone?" Tags="|mtp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17998" PostTypeId="2" ParentId="17997" CreationDate="2019-01-21T16:34:56.870" Score="1" Body="&lt;p&gt;That's because, unfortunately, Elementary OS ships without MTP support. MTP is the protocol Android uses to share files with a desktop OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There was a ppa called &lt;code&gt;ppa:langdalepl/gvfs-mtp&lt;/code&gt;, but it seems to have gone offline. That means it will be challenging to get your Android phone to work well with the Files app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is another solution, however less elegant. Open AppCenter and search for &lt;strong&gt;gmtp&lt;/strong&gt;. gmtp is a special application designed just for downloading and uploading files to and from mp3 players and mobile phones. It might be what you need.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-21T16:34:56.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="17999" PostTypeId="2" ParentId="17995" CreationDate="2019-01-21T23:35:01.057" Score="2" Body="&lt;p&gt;File a bug report at the relevant Github repo elementary/videos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively there is an issue already open &lt;a href=&quot;https://github.com/elementary/videos/issues/32&quot; rel=&quot;nofollow noreferrer&quot;&gt;Audience doesn't show subtitles&lt;/a&gt; here. Try renaming the subtitles to match the video file exactly. &lt;/p&gt;&#xA;" OwnerUserId="16709" LastActivityDate="2019-01-21T23:35:01.057" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18000" PostTypeId="2" ParentId="11468" CreationDate="2019-01-22T11:07:29.977" Score="-1" Body="&lt;p&gt;The problem is that Elementary isn't using Wayland.&#xA;X Window System can't really handle mixed dpi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm really looking forward using Elementary with Wayland.&#xA;But in my opinion it's not usable yet.&lt;/p&gt;&#xA;" OwnerUserId="17123" LastActivityDate="2019-01-22T11:07:29.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18001" PostTypeId="1" CreationDate="2019-01-22T12:54:08.993" Score="1" ViewCount="22" Body="&lt;p&gt;Have a pulsating ghost image problem with text. The behavior is as if the baseline or bounding box translation of a group of text, not a full line, nor necessarily a singular location, has a rounding error. This causes the text group to try and display in 2, sometimes 3 locations at once, mostly one line below, occasionally above. the 2,3 images vary in intensity due to not fully committed to a location, number of tries as to where it displays. It seems to be all applications. Can create by pgup, pgdn, mouse scrolling, but arrow key scrolling appears to be immune. Cannot report to elementary github, tried 2 different OSes, different browsers.&#xA;machine: Ryzen 2400g, ASRock Fatal1ty B450 Gaming-ITX, HyperX Alloy Elite keyboard, Dell mouse, 55&quot; RCA TV as monitor. Occurred Juno normal release (new install) and updated linux 4.20 kernel, with updated mesa. Tried mouse plugged in at different ports also.&lt;/p&gt;&#xA;" OwnerUserId="17125" LastActivityDate="2019-01-22T12:54:08.993" Title="text display problem-Juno" Tags="|gala|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18002" PostTypeId="2" ParentId="17926" CreationDate="2019-01-22T14:17:25.563" Score="2" Body="&lt;p&gt;More people seem to have the same issue: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/94&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-power/issues/94&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For people interesting in how to switch settings via console:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It might be related to an issue in the switchboard app of elementary: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-power/issues/89&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A workaround is explained here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16519/elementary-os-ignoring-suspend-disable/17419#17419&quot;&gt;Elementary OS ignoring suspend disable&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In your case:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;su - -s /bin/bash lightdm&#xA;&#xA;#check the values&#xA;gsettings get org.gnome.settings-daemon.plugins.power lid-close-ac-action&#xA;&#xA;gsettings get org.gnome.settings-daemon.plugins.power lid-close-battery-action&#xA;&#xA;#set values eg. to suspend&#xA;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power lid-close-ac-action suspend&#xA;&#xA;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power lid-close-battery-action suspend&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15856" LastEditorUserId="15856" LastEditDate="2019-01-22T17:23:02.320" LastActivityDate="2019-01-22T17:23:02.320" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18003" PostTypeId="2" ParentId="17177" CreationDate="2019-01-22T14:55:29.847" Score="3" Body="&lt;p&gt;On ElementaryOS you need to run VMWare Workstation as &lt;code&gt;root&lt;/code&gt;. I hear it has something to do with &lt;code&gt;gala&lt;/code&gt;, but I can't speak intelligently to that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is edit the &lt;code&gt;.desktop&lt;/code&gt; file to use &lt;code&gt;pkexec&lt;/code&gt; like milos-stevanovic said, but with a few extra steps so that you don't need to use the terminal each time you want to open VMWare Workstation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, create a new file &lt;code&gt;/usr/share/polkit-1/actions/com.vmware.Workstation.policy&lt;/code&gt; with the contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;!DOCTYPE policyconfig PUBLIC&#xA; &quot;-//freedesktop//DTD PolicyKit Policy Configuration 1.0//EN&quot;&#xA; &quot;http://www.freedesktop.org/standards/PolicyKit/1/policyconfig.dtd&quot;&amp;gt;&#xA;&#xA;&amp;lt;policyconfig&amp;gt;&#xA;&#xA;  &amp;lt;action id=&quot;org.freedesktop.policykit.pkexec.run-vmware&quot;&amp;gt;&#xA;    &amp;lt;description&amp;gt;Run VMWare Workstation&amp;lt;/description&amp;gt;&#xA;    &amp;lt;message&amp;gt;Authentication is required to run VMWare Workstation&amp;lt;/message&amp;gt;&#xA;    &amp;lt;defaults&amp;gt;&#xA;      &amp;lt;allow_any&amp;gt;no&amp;lt;/allow_any&amp;gt;&#xA;      &amp;lt;allow_inactive&amp;gt;no&amp;lt;/allow_inactive&amp;gt;&#xA;      &amp;lt;allow_active&amp;gt;auth_admin_keep&amp;lt;/allow_active&amp;gt;&#xA;    &amp;lt;/defaults&amp;gt;&#xA;    &amp;lt;annotate key=&quot;org.freedesktop.policykit.exec.path&quot;&amp;gt;/usr/bin/vmware&amp;lt;/annotate&amp;gt;&#xA;    &amp;lt;annotate key=&quot;org.freedesktop.policykit.exec.allow_gui&quot;&amp;gt;TRUE&amp;lt;/annotate&amp;gt;&#xA;  &amp;lt;/action&amp;gt;&#xA;&#xA;&amp;lt;/policyconfig&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next, create a new file (&lt;code&gt;/usr/bin/vmware-exec&lt;/code&gt;) which will run &lt;code&gt;vmware&lt;/code&gt; with &lt;code&gt;pkexec&lt;/code&gt;. The contents should be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;pkexec &quot;/usr/bin/vmware&quot; &quot;$@&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally, edit the &lt;code&gt;.desktop&lt;/code&gt; file (&lt;code&gt;/usr/share/applications/vmware-workstation.desktop&lt;/code&gt;) to run our new &lt;code&gt;vmware-exec&lt;/code&gt; file (just change the line starting &lt;code&gt;Exec=&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Name=VMware Workstation&#xA;Comment=Run and manage virtual machines&#xA;Exec=/usr/bin/vmware-exec %U&#xA;Terminal=false&#xA;Type=Application&#xA;Icon=vmware-workstation&#xA;StartupNotify=true&#xA;Categories=System;&#xA;MimeType=application/x-vmware-vm;application/x-vmware-team;application/x-vmware-enc-vm;x-scheme-handler/vmrc;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, you can use the GUI icon to launch VMWare and it will ask for root permission. It's not perfect, but at least it gets VMWare working again until this is fixed upstream.&lt;/p&gt;&#xA;" OwnerUserId="17127" LastEditorUserId="-1" LastEditDate="2019-01-30T21:25:22.383" LastActivityDate="2019-01-30T21:25:22.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18005" PostTypeId="1" CreationDate="2019-01-22T16:50:53.160" Score="1" ViewCount="37" Body="&lt;p&gt;Is it possible to set a permanent zoom level for the Mail app? I can use Ctrl/+- on individual messages but I would like to be able to set a custom zoom level to be used/remembered permanently&lt;/p&gt;&#xA;" OwnerUserId="17129" LastActivityDate="2019-01-22T16:50:53.160" Title="Zoom Level in Mail" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18006" PostTypeId="1" CreationDate="2019-01-22T18:31:21.987" Score="0" ViewCount="47" Body="&lt;p&gt;What does the red number 3 mean in the dock, I thought maybe it meant 3 application need updating but can not find any reference to that in the application.&lt;/p&gt;&#xA;" OwnerUserId="17130" LastActivityDate="2019-06-21T21:02:25.290" Title="AppCenter red number 3 in dock" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18007" PostTypeId="2" ParentId="18006" CreationDate="2019-01-22T20:29:54.120" Score="1" Body="&lt;p&gt;This indicator does mean that there are three available updates for your system. If you open AppCenter and click on the &quot;Installed&quot; tab, you should be able to see what these are. If no updates do appear in AppCenter, you may try manually updating your system via the terminal and check if that changes anything. The command for this would be &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt full-upgrade&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-22T20:29:54.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18009" PostTypeId="2" ParentId="17302" CreationDate="2019-01-23T02:38:57.553" Score="1" Body="&lt;p&gt;This worked for me, after struggling for a while:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;sudo apt update&#xA;sudo apt install wine-staging-i386&#xA;sudo apt -y install --install-recommends wine-staging&#xA;sudo apt -y install --install-recommends winehq-staging&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot. If anything bad happens, try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3225" LastActivityDate="2019-01-23T02:38:57.553" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18010" PostTypeId="1" CreationDate="2019-01-23T05:51:18.797" Score="1" ViewCount="170" Body="&lt;p&gt;Applications installed via flatpak use the default bundled theme and it cannot access the system-installed themes. As a workaround, they allow extensions(?) is what I think they're called so I can import themes into it and make the apps use that instead. But I don't know how to get the elementary OS 5.0 theme into that.&lt;/p&gt;&#xA;" OwnerUserId="16719" LastActivityDate="2019-01-23T05:51:18.797" Title="How do I install the elementary OS 5.0 theme to flatpak?" Tags="|release-juno|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18011" PostTypeId="1" CreationDate="2019-01-23T08:23:52.983" Score="1" ViewCount="218" Body="&lt;p&gt;I have a problem with my keyboard in elementary OS Juno. In the lock screen, my num lock works fine, but when I login it does not work.&lt;/p&gt;&#xA;" OwnerUserId="17136" LastEditorUserId="16827" LastEditDate="2019-04-15T22:14:06.347" LastActivityDate="2020-09-13T02:54:30.867" Title="Num lock does not work in elementary OS Juno" Tags="|release-juno|system|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18012" PostTypeId="1" CreationDate="2019-01-23T08:55:45.997" Score="1" ViewCount="1470" Body="&lt;p&gt;Just installed elementary os. in the terminal, ll gives a list of files and directories showing directories with lightblue color with green background - which is unlucky with respect to contrast, hardly can read anything. also this looks screaming.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the most simple way to change this theme? I installed dconf Editor and believe I could set a custom value for &lt;/p&gt;&#xA;&#xA;&lt;p&gt;#073642:#dc322f:#859900:#b58900:#268bd2:#ec0048:#2aa198:#94a3a5:#586e75:#cb4b16:#859900:#b58900:#268bd2:#d33682:#2aa198:#6c71c4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just do not know where to get more reasonable values for that. And not sure if this is the right point too.&lt;/p&gt;&#xA;" OwnerUserId="16853" LastActivityDate="2021-11-28T16:36:31.300" Title="What is the most simplest way to change (fix) the colors in the terminal (bash)" Tags="|bash|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18013" PostTypeId="2" ParentId="16558" CreationDate="2019-01-23T09:46:08.410" Score="1" Body="&lt;p&gt;This is a &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-bluetooth/issues/64&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported bug&lt;/a&gt;. And a &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/187&quot; rel=&quot;nofollow noreferrer&quot;&gt;fix&lt;/a&gt; was recently approved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution to your problem seems to be to wait for an update. :)&lt;/p&gt;&#xA;" OwnerUserId="15651" LastActivityDate="2019-01-23T09:46:08.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18014" PostTypeId="1" CreationDate="2019-01-23T10:02:06.580" Score="1" ViewCount="1926" Body="&lt;p&gt;will there be an update to kernel 4.19 LTS or higher soon? i have brand new laptop/hardware that would benefit from it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;ukuu oddly enough doesn't display 4.19 LTS. how can i switch to 4.19 LTS (complete newbie) without ukuu? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i already had experience with this kernel with another linux - os (but switched to you) - lower cpu- temperature on my system was a significant advantage.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;otherwise: best distro of all. thx.&lt;/p&gt;&#xA;" OwnerUserId="17137" LastEditorUserId="17137" LastEditDate="2019-01-24T12:56:51.673" LastActivityDate="2019-01-26T10:48:42.583" Title="kernel-update for new hardware?" Tags="|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18015" PostTypeId="2" ParentId="2611" CreationDate="2019-01-23T12:30:40.610" Score="3" Body="&lt;p&gt;I was running Elementary 5 in VirtualBox 6 (upgraded from 5) and the GUI stopped working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reinstalling &lt;code&gt;elementary-desktop&lt;/code&gt; as suggested by @Jeroen using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;did not work for me, but this did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge elementary-desktop&#xA;sudo apt autoremove&#xA;sudo apt install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm sure the &lt;code&gt;autoremove&lt;/code&gt; isn't necessary. I did it to be extra sure that everything was reinstalled properly.&lt;/p&gt;&#xA;" OwnerUserId="7847" LastActivityDate="2019-01-23T12:30:40.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18017" PostTypeId="1" AcceptedAnswerId="18025" CreationDate="2019-01-23T14:22:02.167" Score="4" ViewCount="316" Body="&lt;p&gt;Is there a way to set a keyboard shortcut to show all notifications, i.e. expand the notification bell icon to show all missed notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Right now I have to click the bell icon to show all notifications. I would like to be able to do it through the keyboard as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've checked in the keyboard shortcut settings but I couldn't find an action.&lt;/p&gt;&#xA;" OwnerUserId="17141" LastActivityDate="2019-01-29T07:01:11.273" Title="Keyboard to show/expland all notifications" Tags="|keyboard-shortcuts|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18018" PostTypeId="1" CreationDate="2019-01-23T14:55:25.763" Score="1" ViewCount="19" Body="&lt;p&gt;I recently switched over to elementary os and a friend told me about how easy it is to develop apps for the os. I switch over and the first thing i instantly miss is whatsapp. I use it daily for work and for home so i decided i should write my own app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went through your guys documentation, build process. Made the app and installed it on my system. I decided id release it onto the app center for other users and stuff. So i go through the documentation for doing that, link my github. Let the bot go through the build process. And immediately end up with a failing build for something two lines different from the hello world program.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/winters-brown/whatsapp-web/issues/3&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/winters-brown/whatsapp-web/issues/3&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i thought it was a fluke, realized im talking to a bot, closed the application and then tried to run the build process again. Only to get smacked in the face with the same issue again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/winters-brown/whatsapp-web/issues/4&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/winters-brown/whatsapp-web/issues/4&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have two problems. It says that it does not have the correct dependency's even though their listed in the meson.build file. my other issue is why is it installing a icon pack over installing those dependencies. How do i fix this so i can release it on the app center. Am i missing something or just suck at developing?&lt;/p&gt;&#xA;" OwnerUserId="17142" LastActivityDate="2019-01-23T14:55:25.763" Title="Build fails appcenter bot test" Tags="|applications|appcenter|development|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18022" PostTypeId="2" ParentId="18014" CreationDate="2019-01-23T19:26:55.500" Score="1" Body="&lt;p&gt;you could try the HWE kernel: &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/RollingLTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;RollingLTSEnablementStack&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install the HWE Kernel in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-generic-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This installs currently the 4.18 kernel.&lt;/p&gt;&#xA;" OwnerUserId="17099" LastEditorUserId="16827" LastEditDate="2019-01-24T09:59:01.223" LastActivityDate="2019-01-24T09:59:01.223" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18023" PostTypeId="2" ParentId="17985" CreationDate="2019-01-23T19:36:18.477" Score="1" Body="&lt;p&gt;From your Amazon link in the comments, you appear to have a DP Alt Mode cable, which essentially uses USB C Port for DisplayPort protocol output, which would make use of your regular video card. I believe (but am not positive) that on a Dell XPS 13, that should be an Intel driver. It should, at any rate, show up as one of your &lt;code&gt;DP*&lt;/code&gt;-devices, but is not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Based on that, you might see if &lt;a href=&quot;https://askubuntu.com/questions/546818/displayport-monitor-not-detected-if-switched-off-and-on-again&quot;&gt;this answer&lt;/a&gt; from AskUbuntu is helpful. Another debugging steps you could take care:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;See whether it works in Windows; if it doesn't, it's perhaps not supported at all.&lt;/li&gt;&#xA;&lt;li&gt;Try booting up with the DisplayPort already connected, to see if it's a life detection issue.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You could also try using a DisplayLink cable, which would have different drivers. In general when you Google this, if I were you, I'd search for Ubuntu (on which Elementary is based) and &quot;DP Alt Mode&quot;, which is what your cable uses.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-23T19:36:18.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18025" PostTypeId="2" ParentId="18017" CreationDate="2019-01-23T20:37:05.110" Score="5" Body="&lt;p&gt;I looked around in the Elementary Keyboard Shortcuts and didn't find anything. Fortunately, this is still possible. The command line to run to show notifications is this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wingpanel -o messages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you open up a terminal and run that, it should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With that in mind, you can go into System Settings -&gt; Keyboard -&gt; Shortcuts. From there, select Custom and add a new shortcut (the plus icon at the very bottom). I've highlighted the added command-line shortcut in this screenshot. (You can ignore the other custom keyboard shortcuts I've added):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9c0nC.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9c0nC.png&quot; alt=&quot;Screenshot of settings showing keyboard shortcut&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-23T20:37:05.110" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18028" PostTypeId="2" ParentId="10290" CreationDate="2019-01-23T23:04:22.567" Score="2" Body="&lt;p&gt;This functionality has been finally added with elementary OS 5.0 Juno.&lt;/p&gt;&#xA;" OwnerUserId="8162" LastActivityDate="2019-01-23T23:04:22.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18029" PostTypeId="1" CreationDate="2019-01-24T00:26:42.917" Score="1" ViewCount="205" Body="&lt;p&gt;I recently installed Elementary OS alongside my windows 10 PC. After successfully installing eOS I can't boot to Windows 10. I click on the option to boot to the partition that windows 10 is installed on and it just gives me the same problems. I'm stuck with an automatic repair loop and whenever I try to reset my pc or troubleshoot it with the command line I can't seem to fix the issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have any of you run into a problem like this before? I could really use your help. I have a lot of data I really don't want to lose. The important stuff is backed up, but the time and energy to reformat everything and reinstall everything is pretty daunting. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when i tried resetting this PC, it went to 90% and then said it undid all the changes. &lt;/p&gt;&#xA;" OwnerUserId="17152" LastActivityDate="2019-06-24T07:03:20.403" Title="Stuck with windows Automatic repair loop after installing eOS alongside Windows 10" Tags="|dual-boot|grub|startup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18030" PostTypeId="1" CreationDate="2019-01-24T05:03:46.133" Score="1" ViewCount="120" Body="&lt;p&gt;When I start up my PC and Elementary OS the headset makes the &quot;now connected&quot; sound and if I use the volume control on the headset it makes the beeps it's supposed to to acknowledge that sound level is being changed. However, no other sound works on the system, from any source. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I go to sound settings and test speakers, I get no sound. BUT. When I change the speaker balance off-center and test speakers sound starts working, and after this it works system-wide. I have to do this every reboot to get sound working from said headset, though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just wondering if this is a known issue and if there's a way I could fix this? The workaround isn't a big deal honestly but it feels a bit silly. &lt;/p&gt;&#xA;" OwnerUserId="17121" LastActivityDate="2019-01-24T05:03:46.133" Title="Sound issue with Logitech G633 headset" Tags="|release-juno|sound|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18034" PostTypeId="1" CreationDate="2019-01-24T10:37:24.900" Score="1" ViewCount="95" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R7jf8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R7jf8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;I am new to EOS and I wanted to install some 3rd party applications onto my laptop, problem is that the store does not list anything else other than the ones I already have install on the system, any fixes for that?&lt;/p&gt;&#xA;" OwnerUserId="17155" LastActivityDate="2019-01-24T10:37:24.900" Title="App Store does not list anything other than installed apps" Tags="|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18035" PostTypeId="2" ParentId="17978" CreationDate="2019-01-24T12:32:13.243" Score="2" Body="&lt;p&gt;I suspect the other videos require the media source extensions API (MSE) in order for you to receive high-quality videos. WebKitGTK+, the web engine powering Epiphany, requires GStreamer 1.14.4 to enable MSE, but unfortunately elementary has an older version of GStreamer and is unlikely update it since it's part of the base system inherited from Ubuntu. Most likely you're out of luck until the next version of elementary based on Ubuntu 20.04 is released, sorry.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-01-24T12:32:13.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18036" PostTypeId="1" CreationDate="2019-01-24T14:16:24.763" Score="0" ViewCount="100" Body="&lt;p&gt;I wanted to know if it is possible to have desktop experience with EOS, just like in OsX? Would greatly appreciate any help or information about that! ;)&lt;/p&gt;&#xA;" OwnerUserId="17155" LastActivityDate="2019-02-25T12:00:41.873" Title="Folders etc. on desktop like on OsX?" Tags="|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18037" PostTypeId="2" ParentId="17959" CreationDate="2019-01-24T14:40:17.357" Score="1" Body="&lt;p&gt;Problem solved! Good folks at Elementary just posted an update to Camera. This Logitech model is now recognized by Elementary's Camera app and by Google Hangouts. Motion is actually rendered more smoothly in Hangouts. &lt;/p&gt;&#xA;" OwnerUserId="17077" LastActivityDate="2019-01-24T14:40:17.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18038" PostTypeId="2" ParentId="18036" CreationDate="2019-01-24T15:44:33.340" Score="0" Body="&lt;p&gt;Everything is possible ;) but very big BUT. What is the point to change ElementaryOS to look like and act like another OS or distribution, if you need desktop folders and icons try other distributions, or to be specified other Desktop Environments.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: And check &lt;a href=&quot;https://www.omgubuntu.co.uk/2018/01/elementary-desktop-icons-files-app&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT2: And with one simple search on the &lt;a href=&quot;https://elementaryos.stackexchange.com&quot;&gt;elementaryos.stackexchange.com&lt;/a&gt; you will get &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15915/how-do-i-enable-desktop-icons-on-elementaryos-5-0-juno&quot;&gt;this answer&lt;/a&gt;. ;)&lt;/p&gt;&#xA;" OwnerUserId="15493" LastEditorUserId="15493" LastEditDate="2019-01-24T15:56:26.000" LastActivityDate="2019-01-24T15:56:26.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18041" PostTypeId="1" CreationDate="2019-01-24T17:13:47.477" Score="0" ViewCount="117" Body="&lt;p&gt;What keyboard shortcuts are available for actions like zooming, tagging, next picture, etc.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2019-06-23T18:02:25.480" Title="What are the keyboard shortcuts in Photos?" Tags="|keyboard-shortcuts|photos|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18042" PostTypeId="2" ParentId="18041" CreationDate="2019-01-24T17:13:47.477" Score="1" Body="&lt;p&gt;The ones I could find so far:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;A&lt;/kbd&gt; Select all&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;I&lt;/kbd&gt; Import from folder&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt; New smart album&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F&lt;/kbd&gt; Search&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Return&lt;/kbd&gt; View photo&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Function keys:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;F9&lt;/kbd&gt; Toggle showing sidebar (left panel)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;F10&lt;/kbd&gt; Toggle showing photo info (right panel)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;F11&lt;/kbd&gt; Full screen mode&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;When viewing an image:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Shift&lt;/kbd&gt; Zoom out (while holding the key)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;&amp;leftarrow;&lt;/kbd&gt; / &lt;kbd&gt;&amp;rightarrow;&lt;/kbd&gt; Previous or next photo&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Shift&lt;/kbd&gt; + &lt;kbd&gt;&amp;leftarrow;&lt;/kbd&gt; / &lt;kbd&gt;&amp;rightarrow;&lt;/kbd&gt; Jump to previous or next photo (while zoomed in)&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Space&lt;/kbd&gt; Next photo&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; Swap &quot;rotate&quot; button to &quot;left&quot;, and swap &quot;flip&quot; button to &quot;vertically&quot;&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;/&lt;/kbd&gt; Flag photo&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;+&lt;/kbd&gt; / &lt;kbd&gt;-&lt;/kbd&gt; Zoom in or out&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;[&lt;/kbd&gt; / &lt;kbd&gt;]&lt;/kbd&gt; Rotate photo CCW or CW&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="100" LastEditorUserId="100" LastEditDate="2019-01-24T17:43:04.300" LastActivityDate="2019-01-24T17:43:04.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18043" PostTypeId="1" CreationDate="2019-01-24T17:17:47.570" Score="1" ViewCount="197" Body="&lt;p&gt;i used to use airvpn in ubuntu and adding the ppa was easy with the graphical interface. I have experience adding ppa's through the terminal but this ppa doesnt seem to fit the right format...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;deb &lt;a href=&quot;http://eddie.website/repository/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://eddie.website/repository/apt&lt;/a&gt; testing main&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how would i structure the command?&lt;/p&gt;&#xA;" OwnerUserId="17159" LastActivityDate="2019-06-23T21:02:35.350" Title="Adding ppa for airvpn app eddie-ui" Tags="|ppa|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18044" PostTypeId="1" CreationDate="2019-01-24T17:59:50.533" Score="1" ViewCount="151" Body="&lt;p&gt;I'm new to Elementary and Linux in general, my question is if its possible to have audio from both frontal and back audio jacks at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example, I have coneccted my headphones to the back panel and my main audio speakers to the front pannel. &#xA;In windows I get sound from both at the same time, so when I want to listen to music I just turn on the speakers, the pc keeps sending sound for both connectors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to do this in Elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD: I didnt do anything to achieve this on windows, just plugged and it worked, so it isnt an specific function or a program.&lt;/p&gt;&#xA;" OwnerUserId="17160" LastEditorUserId="16827" LastEditDate="2019-01-26T10:31:57.520" LastActivityDate="2019-10-23T12:02:25.317" Title="Get audio from both front and back connectors eOS Juno" Tags="|release-juno|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18045" PostTypeId="2" ParentId="18044" CreationDate="2019-01-24T18:41:33.733" Score="1" Body="&lt;p&gt;Fixed it, just installed pavucontrol, and changed the audio output to analog headset, it reads unplugged, but it worked like a charm.&lt;/p&gt;&#xA;" OwnerUserId="17160" LastActivityDate="2019-01-24T18:41:33.733" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18046" PostTypeId="2" ParentId="18043" CreationDate="2019-01-24T20:13:54.510" Score="1" Body="&lt;p&gt;This should do the trick:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO - https://eddie.website/repository/keys/eddie_maintainer_gpg.key|sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;followed by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository &quot;deb http://eddie.website/repository/apt stable main&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-01-24T20:13:54.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18048" PostTypeId="2" ParentId="15051" CreationDate="2019-01-25T02:08:50.843" Score="0" Body="&lt;p&gt;No VAT or other Sales Tax is charged on the purchase and it is not legally classified as a donation. Companies should have nothing to claim back and simply using a company card should be sufficient bookkeeping. Alternatively you can purchase it personally and submit to whatever remittance procedure your company has.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2019-01-25T02:08:50.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18049" PostTypeId="2" ParentId="16624" CreationDate="2019-01-25T05:15:18.543" Score="1" Body="&lt;p&gt;If libinput driver installed by default feel too sensitive to point and click a small part of the screen,&#xA; you can install synaptics driver instead.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;logout/in after package installation.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2019-01-25T05:15:18.543" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18050" PostTypeId="1" AcceptedAnswerId="18054" CreationDate="2019-01-25T05:54:48.377" Score="1" ViewCount="322" Body="&lt;p&gt;So... Unintentionally I put the music folder as the system folder and now it takes forever to scan, even by it gets into a loop when it starts to scan the /dev folder, so I've been looking for ways to set the music folder without opening the application, or reset application settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: user-dirs.dirs don't work&lt;/p&gt;&#xA;" OwnerDisplayName="user16713" LastActivityDate="2020-04-14T09:42:58.027" Title="Where are io.elementary.music settings file?" Tags="|settings|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18051" PostTypeId="2" ParentId="18029" CreationDate="2019-01-25T05:55:03.807" Score="1" Body="&lt;p&gt;Your problem is that you change to AHCI. Windows was installed on IDE. I had same problem some times ago, try to revert back to IDE and try to boot Windows. If you fix it you need to reinstall elementary to use IDE... or to do whole new installation of Windows with AHCI enabled on boot... Your choice  ;) Good luck ;)&lt;/p&gt;&#xA;" OwnerUserId="15493" LastActivityDate="2019-01-25T05:55:03.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18052" PostTypeId="2" ParentId="16055" CreationDate="2019-01-25T06:02:56.703" Score="2" Body="&lt;p&gt;It's because MacBook's native bootloader looks for .efi files inside all internal and external HFS+ partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Necessary conditions are...&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;there is a partition formatted as HFS+&lt;/li&gt;&#xA;  &lt;li&gt;the partition contains the partition id af00&lt;/li&gt;&#xA;  &lt;li&gt;in the root of that partition, there is a file called mach_kernel&lt;/li&gt;&#xA;  &lt;li&gt;inside that partition, there a boot.efi file inside /System/Library/CoreServices&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Arch Linux wiki describes in detail&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Mac#Using_the_native_Apple_bootloader_with_GRUB&quot; rel=&quot;nofollow noreferrer&quot;&gt;Using the native Apple bootloader with GRUB (Mac in archlinux wiki)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, it seems to load efi file from /EFI/BOOT so, if your esp(or EFI) partition has appropriate folder, native boot loader shows &quot;EFI Boot&quot;.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2019-01-25T06:02:56.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18053" PostTypeId="1" CreationDate="2019-01-25T06:11:57.343" Score="0" ViewCount="29" Body="&lt;p&gt;I have tried for the last week to get my startup applications to change, but for some reason every time I try to change the settings nothing happens. The next time I open the settings the startup applications is back to before I edited it.&#xA;I also tried the gnome-session-properties to see if something was wrong with the Eos settings. &#xA;I do not know how to fix it, and I am out of ideas. Do anybody have an idea?&lt;/p&gt;&#xA;" OwnerUserId="17164" LastActivityDate="2019-01-25T06:11:57.343" Title="Startup Applications in settings resets when settings i closed" Tags="|settings|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18054" PostTypeId="2" ParentId="18050" CreationDate="2019-01-25T08:49:07.600" Score="2" Body="&lt;p&gt;You can do it with &lt;code&gt;gconf-editor&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If not installed do &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt;, open the app (you'll find it in &lt;code&gt;Applications -&amp;gt; System&lt;/code&gt; menu) and go to &lt;code&gt;io.elementary.music.settings&lt;/code&gt; where you can find the &lt;code&gt;music-floder&lt;/code&gt; key which you can then change manually.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-01-25T08:49:07.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18055" PostTypeId="2" ParentId="17961" CreationDate="2019-01-25T10:51:37.970" Score="1" Body="&lt;p&gt;There is a merge request in progress that will fix this problem (at least stop the crash) despite of faulty Russian translations.  I will check whether it is possible to fix the faulty Russian translations by a PR rather than Weblate.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-01-25T10:51:37.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18056" PostTypeId="1" CreationDate="2019-01-25T11:04:57.273" Score="2" ViewCount="594" Body="&lt;p&gt;I'm running the latest eOs Juno with all the latest updates. Unfortunately upon restarting my laptop (Lenovo Thinkpad T460P) the external monitor stopped working and I'm unable to figure out how to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I have done the following&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;-deleted the ~/.config/monitor.xml and monitor.xml~ files. &lt;/li&gt;&#xA;&lt;li&gt;-restarted my laptop&lt;/li&gt;&#xA;&lt;li&gt;plugged out and plugged in my HDMI cable &lt;/li&gt;&#xA;&lt;li&gt;started up eOS with the HDMI cable not plugged in &lt;/li&gt;&#xA;&lt;li&gt;power cycled the laptop&lt;/li&gt;&#xA;&lt;li&gt;tested different monitors (will test more soon)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The strangest thing was that it was working fine before a restart.&lt;/p&gt;&#xA;" OwnerUserId="17166" LastEditorUserId="20782" LastEditDate="2021-06-07T03:48:27.380" LastActivityDate="2024-02-22T10:00:40.107" Title="Lenovo Thinkpad External Monitor Issue" Tags="|release-juno|display|monitors|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18057" PostTypeId="2" ParentId="18056" CreationDate="2019-01-25T13:10:04.090" Score="0" Body="&lt;p&gt;Pressing the windows key logo + L (locking the screen) resolved my issue. I'm leaving this here in case it helps others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: My issue has returned and locking the screen no longer resolves my issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 2: Locking the screen resolved my issue again after waiting an hour and just using the computer normally. I'm sure it'll happen again, so I'll continue to provide feedback. I went through the same troubleshooting steps as I had done previously.&lt;/p&gt;&#xA;" OwnerUserId="17166" LastEditorUserId="17166" LastEditDate="2019-01-28T15:05:29.547" LastActivityDate="2019-01-28T15:05:29.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18058" PostTypeId="2" ParentId="16766" CreationDate="2019-01-25T13:14:05.610" Score="2" Body="&lt;p&gt;We can use command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pactl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;pactl - Control a running PulseAudio sound server on terminal&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;first, list our available properties in our machine using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    pactl list cards&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cMGgN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cMGgN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;based on my hardware above, i set output:hdmi-stereo as my default profile using this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pactl set-card-profile 0 output:hdmi-stereo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if we want to set to internal output(in my case my laptop), use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; pactl set-card-profile 0 output:analog-stereo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and magically, in sound settings is gonna be like this.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/DR4JR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DR4JR.png&quot; alt=&quot;sound settings going normal again&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this can help.more detail about pactl command use this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pactl -h&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or check manual page:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;man pactl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17167" LastActivityDate="2019-01-25T13:14:05.610" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18059" PostTypeId="1" CreationDate="2019-01-25T16:37:21.840" Score="1" ViewCount="29" Body="&lt;p&gt;I applied the most recent security update to elementaryOS and I no long get an authentication screen when booting - the screen is blank.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By chance, I typed in the correct decrypt password and was able to login as normal.  This is a big miss on details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Elementary OS on VMWare on a Mac running MacOS 10.13.6.&lt;/p&gt;&#xA;" OwnerUserId="17170" LastActivityDate="2019-01-25T16:37:21.840" Title="Latest security update breaks encryptfs authentication screen" Tags="|full-disk-encryption|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18061" PostTypeId="2" ParentId="17942" CreationDate="2019-01-25T20:49:00.753" Score="1" Body="&lt;p&gt;Looks like it's related to a keyboard shortcut associated with this combination. Go to &lt;code&gt;System Settings&lt;/code&gt; -&gt;  &lt;code&gt;Keyboard&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ajfVe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ajfVe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The tabs &lt;code&gt;Layout&lt;/code&gt; and &lt;code&gt;Shortcuts&lt;/code&gt; have all configurations for it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7pMEV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7pMEV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I'm using WPS Office I had to install the IBus input method, that has also some configurable shortcuts. Check these out also if that's the case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yS2gx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yS2gx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this doesn't work, you can try dconf-editor:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; &lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;dconf-editor&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make a search for &quot;&lt;em&gt;key&lt;/em&gt;&quot; and you'll get a list of key bindings.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uQmqy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uQmqy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17090" LastActivityDate="2019-01-25T20:49:00.753" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18062" PostTypeId="2" ParentId="18012" CreationDate="2019-01-25T21:00:09.080" Score="1" Body="&lt;p&gt;Try Elementary Tweaks, as described here (&lt;a href=&quot;https://itsfoss.com/install-elementary-tweaks-in-elementary-os-freya-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/install-elementary-tweaks-in-elementary-os-freya-luna/&lt;/a&gt;). It will appear in &lt;code&gt;Settings&lt;/code&gt; panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4em9O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4em9O.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ut7xd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ut7xd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17090" LastActivityDate="2019-01-25T21:00:09.080" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18063" PostTypeId="2" ParentId="17990" CreationDate="2019-01-25T21:08:50.230" Score="1" Body="&lt;p&gt;Run dconf-editor and search for &quot;mouse&quot; entries.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to change some options like &quot;acceleration time&quot; or &quot;mouse tracking mode&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kWsoS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kWsoS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17090" LastActivityDate="2019-01-25T21:08:50.230" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18064" PostTypeId="1" AcceptedAnswerId="18141" CreationDate="2019-01-26T00:55:59.733" Score="2" ViewCount="4431" Body="&lt;p&gt;After I start up, I open Terminal and run 2 sudo commands.  I am trying to automate this step.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I issue these 2 commands (to activate a 3Dconnexion SpaceMouse 3D mouse):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo xhost +&#xA;sudo /etc/init.d/spacenavd restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have tried 3 ways to automate these 2 commands but none has worked:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I put them both in a bash script spacenavd.sh and place it in my user home.&lt;/li&gt;&#xA;&lt;li&gt;In System Settings &gt; Applications &gt; Startup ( see attachment below )&lt;/li&gt;&#xA;&lt;li&gt;I create a script /etc/rc.local and give it permissions.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;On start up I tail -n 100 /var/log/syslog but have not found a solution that works.  Any tips appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary rules. Big thanks to all the effort going into it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LCniC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LCniC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16967" LastActivityDate="2019-01-31T17:08:28.563" Title="How to run sudo commands on start up?" Tags="|startup|sudo|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18065" PostTypeId="2" ParentId="8502" CreationDate="2019-01-26T04:28:50.903" Score="0" Body="&lt;p&gt;try disabling secure boot in the BIOS see if that helps when you install&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2019-01-26T04:28:50.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18067" PostTypeId="1" AcceptedAnswerId="18097" CreationDate="2019-01-26T06:11:46.280" Score="1" ViewCount="1286" Body="&lt;p&gt;I've installed the Nextcloud Client through with a Snap. There is no system tray icon showing up. Is there a way to get it or is it an issue of Nextcloud?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17172" LastActivityDate="2019-01-28T19:13:12.103" Title="System tray icon for Nextloud" Tags="|pantheon|" AnswerCount="1" CommentCount="1" ClosedDate="2019-02-20T01:30:14.410" ContentLicense="CC BY-SA 4.0" />
  <row Id="18068" PostTypeId="1" AcceptedAnswerId="18086" CreationDate="2019-01-26T06:35:19.877" Score="1" ViewCount="796" Body="&lt;p&gt;&lt;strong&gt;Elementary OS is installed on my hard disk drive.&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the Debian based Linux distros I have tried out, including Elementary have one common issue - &lt;strong&gt;&lt;em&gt;the battery consumption is huge&lt;/em&gt;&lt;/strong&gt;, compared to the amount of battery Windows consumes. My laptop doesn't have great battery performance, but when Windows runs on it, and I'm doing lightweight stuff, it easily lasts for 4 to 4.5 hours. With Elementary, it hardly lasts for 2 hours. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this because I am installing the Linux distros on the HDD? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop - the Acer Nitro 5 AN515-51 - has a 128 GB NVME SSD and a 1 TB HDD. Since I use a few Adobe softwares and other Windows-only Softwares, I don't want to remove Windows from the SSD partition and install it on the HDD. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone can help, could you please give me answers to the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I might consider getting a SATA SSD to replace the current 1 TB HDD, but, &lt;em&gt;will that help with the battery consumption issue?&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;I have tried out &lt;code&gt;tlp&lt;/code&gt;, but that doesn't cause much of a difference. Are there any other ways to deal with this?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16933" LastActivityDate="2019-01-29T06:58:34.177" Title="Battery consumption" Tags="|laptop|battery|release-juno|hdd|tlp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18070" PostTypeId="2" ParentId="18068" CreationDate="2019-01-26T07:45:25.293" Score="1" Body="&lt;p&gt;My experience is that poor power consumption is caused by the video card running too hot and not knowing when to slow down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you tried to install a video driver to your video card?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try installing the driver for your: &lt;a href=&quot;https://www.geforce.com/drivers/results/141700&quot; rel=&quot;nofollow noreferrer&quot;&gt;GeForce® GTX 1050 Ti&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17164" LastActivityDate="2019-01-26T07:45:25.293" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18071" PostTypeId="1" CreationDate="2019-01-26T07:52:17.233" Score="0" ViewCount="121" Body="&lt;p&gt;I built a pc and I want to install Radeon Pro Software for Enterprise on Ubuntu 18.04.1, I search and tried to tweak the files but it did not work and also I don't know how to use wine as the instructions varies.&lt;/p&gt;&#xA;" OwnerUserId="17173" LastActivityDate="2024-02-02T08:04:20.517" Title="Help install software and using wine" Tags="|software-installation|wine|release-juno|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18073" PostTypeId="1" CreationDate="2019-01-26T10:35:57.030" Score="1" ViewCount="179" Body="&lt;p&gt;I encounter an error each time I go in the Appcenter with updates, here is the resume :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-small (main/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-large (main/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Packages (non-free/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-small (non-free/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons (non-free/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-hidpi (non-free/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-large (non-free/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;E: http://apt.last.fm/debian stable InRelease is not (yet) available (Could not resolve 'apt.last.fm')&#xA;W: Target Packages (non-free/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-small (non-free/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons (non-free/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-hidpi (non-free/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-large (non-free/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-small (main/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-large (main/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;E: The repository 'http://ppa.launchpad.net/grabli66-r/eos/ubuntu bionic Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Then, there are a few programs that I cannot launch at all like Steam, Nicehash, Rambox and few others which fail at launch.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Moreover, Last.fm is ok but I cannot log in without an error like :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Couldn't connect to the internet to verify your user details.&#xA;If you use a proxy ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I got no proxy there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could I do now ? It seems exhaustive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="17177" LastEditorUserId="17177" LastEditDate="2019-01-26T10:52:54.503" LastActivityDate="2019-06-25T14:01:35.143" Title="Appcenter popup error on each time and few others problems to launch programs" Tags="|updates|applications|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18074" PostTypeId="2" ParentId="18036" CreationDate="2019-01-26T10:40:45.110" Score="1" Body="&lt;p&gt;go to the app center, search &amp;amp; install the app: &quot;desktop folder&quot;. that's it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but maybe, after some time you will notice that there is no need for folders on the desktop, because everything can be attached to the dock and the rest can be accessed via apps (top left, also quickly accessible via hot corner or keyboard shortcuts). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i only have a note (also a feature of this app) on the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a desktop should keep space free resp. should be there to manage open applications. that's all. imho. but everybody as he wants.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: you can have your dock automatically fade in when you move the mouse to the bottom. maximized windows can still cover it if you don't do something like that (in this way, you can also minimize an open, maximized application to the dock itself; without any minimize - button).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pps: you can also configure the dock in any possible way:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=I9o-9uE6Iwg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=I9o-9uE6Iwg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17137" LastActivityDate="2019-01-26T10:40:45.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18076" PostTypeId="1" CreationDate="2019-01-26T11:36:03.047" Score="0" ViewCount="153" Body="&lt;p&gt;I have been trying to create global hotkeys for Parlatype using &lt;code&gt;xbindkeys&lt;/code&gt;, following instructions on Parlatype's &lt;a href=&quot;https://github.com/gkarsay/parlatype/issues/18&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github page&lt;/a&gt;.&lt;br&gt;&#xA;So I added the following lines to &lt;code&gt;~/.xbindkeysrc&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#Play/Pause&#xA;&quot;qdbus com.github.gkarsay.parlatype /com/github/gkarsay/parlatype com.github.gkarsay.parlatype.PlayPause&quot;&#xA;   Shift + space&#xA;&#xA;#Jump back&#xA;&quot;qdbus com.github.gkarsay.parlatype /com/github/gkarsay/parlatype com.github.gkarsay.parlatype.JumpBack&quot;&#xA;   Shift+Alt + Left&#xA;&#xA;#Jump forward&#xA;&quot;qdbus com.github.gkarsay.parlatype /com/github/gkarsay/parlatype com.github.gkarsay.parlatype.JumpForward&quot;&#xA;   Shift+Alt + Right&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, as much as it had worked perfectly in past versions of Elementary OS, this time the process yields no results, Parlatype remained unresponsive both in the fore- and in the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks to everyone who will help me solve this :)&lt;/p&gt;&#xA;" OwnerUserId="11802" LastActivityDate="2024-03-18T00:03:25.367" Title="Xbindkeys not working on Elementary OS Juno" Tags="|release-juno|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18077" PostTypeId="2" ParentId="18073" CreationDate="2019-01-26T12:41:57.087" Score="1" Body="&lt;p&gt;Remove in terminal E: PPA:grabli66-r/eos&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository -r ppa:grabli66-r/eos&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or edit /etc/apt/sources.list then:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get clean&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoclean&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If needed grabli66-r/eos add PPA again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:grabli66-r/eos&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17176" LastActivityDate="2019-01-26T12:41:57.087" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18081" PostTypeId="1" CreationDate="2019-01-27T07:50:14.463" Score="0" ViewCount="1083" Body="&lt;p&gt;When I have 2 keyboard layouts (russian and english) they change slowly. How can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="17189" LastEditorUserId="26" LastEditDate="2019-02-20T01:59:13.407" LastActivityDate="2019-02-20T01:59:13.407" Title="How can I fix keyboard layouts changing very slowly?" Tags="|release-juno|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18083" PostTypeId="1" CreationDate="2019-01-27T10:59:51.567" Score="0" ViewCount="123" Body="&lt;p&gt;Recently I have to delete my swap partition in order to install Windows 10 (install srceen said something 'bout having too much partition on my drive). Now every time I run elementary os or other linux distro (which have been reinstalled due to shenanigans and worked OK), there's like a pause (over 10s of something) of just the blinking cursor before the computer prints out this line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Gave up waiting for suspend/resume device&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and start booting normally. And as for shutdowns, the system prints something like &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;a stop job is running for section c2 of user user XXXX (xx/24s)&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;before shutdown. For the former issues, I have tried creating a swap file (with the instructions form &lt;a href=&quot;https://linuxize.com/post/create-a-linux-swap-file/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This article&lt;/a&gt;), then change /etc/fstab to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda8 during installation&#xA;UUID=fa6b3b5e-904d-4a50-8c4f-5993c38937f2 /               ext4    errors=remount-ro 0       1&#xA;# swap was on /dev/sda5 during installation&#xA;#disable swap&#xA;#UUID=4dcc1eb2-c8dc-4b4a-bed3-ab53f581a0ff none            swap    sw              0       0&#xA;/swapfile swap swap defaults 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and &lt;del&gt;edited &quot;/etc/initramfs-tools/conf.d/resume&quot; to &quot;RESUME=UUID=none&quot;&lt;/del&gt; commented (basically deleted) the line with seemingly no effect to the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another thing is that, in the installation of Windows, I accidentally deleted all my Linux partitions. So I aborted the installation, tried to recover the partitions with testdisk- which thankfully worked- then started the installation again. I did run &lt;code&gt;sudo fsck -f&lt;/code&gt; (which turns in clean) and the root partitions' UUID seems to be unchanged so I don't know if this have anything to do with the problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It isn't that much an serious issue to me as it's still relatively quick to log in/out of the os. But I would be more happy if those delay were fix and gone.&lt;/p&gt;&#xA;" OwnerUserId="16120" LastEditorUserId="16120" LastEditDate="2019-02-05T07:55:40.867" LastActivityDate="2024-02-09T18:08:11.040" Title="Delays on startups and shutdowns (after removing swap partition)" Tags="|startup|shutdown|microsoft-windows|swap|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18084" PostTypeId="1" CreationDate="2019-01-27T11:04:01.383" Score="1" ViewCount="72" Body="&lt;p&gt;I would love to switch to elementaryOS Juno, so I tried a live version on USB. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, it seems like eOS doesn't detect my battery, so I don't have a battery icon and I don't have battery options too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried the same Live USB on another laptop and battery is detected and works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solutions? My pc is HP x2 10-p033nl&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I'm new to this world, so I still have to learn a lot&lt;/p&gt;&#xA;" OwnerUserId="17191" LastActivityDate="2019-01-27T11:04:01.383" Title="Battery not detected on Live Juno" Tags="|usb|battery|release-juno|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18085" PostTypeId="1" AcceptedAnswerId="18145" CreationDate="2019-01-27T15:13:08.110" Score="1" ViewCount="410" Body="&lt;p&gt;I'm new to eOS. Sorry for my probably bad english, i'm french ^^&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I'm trying to watch videos (personal videos or youtube), the screen is in a strange red style.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sdHJY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sdHJY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the quality is very low (like 240p) i can watch without this effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After many hours of research, the problem is probably because my PC has 2 gpu, and use the wrong one. Or because of old drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here some terminal commands i found on topics&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cbPUU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cbPUU.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9Jff5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9Jff5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see on the second one, I have a Radeon R7 which, i think, is not used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you know what i have to do ? How can i change the gpu used ? Or which driver i have to install ?&lt;/p&gt;&#xA;" OwnerUserId="17193" LastActivityDate="2019-01-30T22:17:31.040" Title="AMD Dual GPU Issue" Tags="|graphics|amd|radeon|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18086" PostTypeId="2" ParentId="18068" CreationDate="2019-01-27T17:29:11.437" Score="1" Body="&lt;p&gt;My experience with low battery life on Linux has been that the two main culprits are the Video card and the screen. You can't do much about the second if you have a 4k screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the Video card problem is mainly a combination of two issues:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;The Nvidia proprietary drivers for Linux are not as optimized as that for Windows. This causes high power usage (15W plus on my system; use &lt;code&gt;powertop&lt;/code&gt; to see for yours) whenever the system is using the video card. So, I just switch off the video card unless I have to play any games ( I know it's a bad solution, but it works).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo prime-select intel # Log out and log back in after this&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This brings down the power consumption on my laptop from 15W+ to less than 10W.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Depending on the driver version you have installed, the above fix may or may not work for you. &lt;a href=&quot;https://github.com/stockmind/dell-xps-9560-ubuntu-respin/issues/8#issuecomment-389292575&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; is the temporary workaround to get it working and &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/ubuntu-drivers-common/+bug/1778011&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; are the instructions to try out the official fix in Ubuntu. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17196" LastActivityDate="2019-01-27T17:29:11.437" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18087" PostTypeId="1" AcceptedAnswerId="18151" CreationDate="2019-01-28T05:26:16.500" Score="4" ViewCount="4169" Body="&lt;p&gt;I finally tried to get on the Juno(&lt;a href=&quot;/questions/tagged/release-juno&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;release-juno&amp;#39;&quot; rel=&quot;tag&quot;&gt;release-juno&lt;/a&gt;) ship, but I'm having a major issue in that when I boot up, I get the elementary OS logo followed by a black/blank screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I can do&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can press &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; to &lt;kbd&gt;F6&lt;/kbd&gt; and enter TTY mode, log in, and execute commands. I ran a &lt;code&gt;sudo apt update&lt;/code&gt; and &lt;code&gt;sudo apt upgrade&lt;/code&gt; this way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can enter the graphic interface if I put &lt;code&gt;nomodeset&lt;/code&gt; in grub. This was a suggestion I saw often while searching for a solution. However, performance is not great, and I can't even use my monitor's resolution of 1920x1080. (Max available is 1600x1200 when I enter through &lt;code&gt;nomodeset&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Hardware info&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Motherboard: MSI MS-9818&lt;/li&gt;&#xA;&lt;li&gt;Processor: Intel Core 2 Duo P9500 @2.53GHz&lt;/li&gt;&#xA;&lt;li&gt;Graphics: Intel Mobile 4 Series Chipset Integrated Graphics Controller (Intel GM45 is the specific one listed in the motherboard's manual.)&lt;/li&gt;&#xA;&lt;li&gt;RAM: 4GB&lt;/li&gt;&#xA;&lt;li&gt;Monitor: Asus VW246H connected through the built in HDMI port&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Other info&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Juno, I also had to use &lt;code&gt;nomodeset&lt;/code&gt; in grub on the live USB because otherwise, it would also lead me to a blank screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am running a dual boot with Windows 10. Don't have a spare drive to test out a pure elementary install, but I did have Loki running fine since its release on this same hardware, drive structure, etc. before this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Jan 29 2019 edit:&lt;/strong&gt; Not sure how relevant or helpful this is, but I also just tried installing Ubuntu 18.04 to test if it was purely an elementary OS issue. I again had to use &lt;code&gt;nomodeset&lt;/code&gt; on the live USB in order to be able to access the install wizard. Once installed, I am once again faced with a blank screen after the grub and logo screens. However, unlike with elementary, I can't even enter TTY mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's all the relevant info I can think of at the moment. Let me know if there's any other info that might be helpful to add. Thanks in advanced.&lt;/p&gt;&#xA;" OwnerUserId="17202" LastEditorUserId="17202" LastEditDate="2019-01-29T22:48:16.467" LastActivityDate="2019-01-31T22:10:13.903" Title="Black/blank screen after fresh Juno install" Tags="|display|boot|release-juno|graphic-drivers|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18088" PostTypeId="2" ParentId="17989" CreationDate="2019-01-28T06:31:00.460" Score="2" Body="&lt;p&gt;I had the same issue with my WiFi Epson XP332. This is a wrong configured and delivered CUPS-problem. I solved it by changing the cups authorization in &lt;code&gt;/etc/cups/cupsd.conf&lt;/code&gt;. I changed the most the settings to &quot;order allow,deny&quot;.&#xA;Then you sholud be able to activate the printer in the settings menu or with &#xA;&lt;code&gt;usr/sbin/cupsenable PRINTERNAME&lt;/code&gt;. Maybe possible that you must reload the CUPS-daemon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think is a very huge bug. eOS is told to be user-friendly, so the printing must work out of the box. You cannot annoy new users with such a bitchy printer behaviour.&lt;/p&gt;&#xA;" OwnerUserId="17203" LastEditorUserId="16827" LastEditDate="2019-01-28T07:42:36.353" LastActivityDate="2019-01-28T07:42:36.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18089" PostTypeId="2" ParentId="18083" CreationDate="2019-01-28T07:24:16.067" Score="0" Body="&lt;p&gt;I guess the swap-partition is still listet in your /etc/fstab ?&#xA;If so, try to uncomment this line in /etc/fstab with a hashmark and reboot.&#xA;Messed up UUIDs in a fstab can cause this mentioned behaviour.&lt;/p&gt;&#xA;" OwnerUserId="17203" LastActivityDate="2019-01-28T07:24:16.067" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18090" PostTypeId="1" AcceptedAnswerId="18796" CreationDate="2019-01-28T11:09:37.117" Score="2" ViewCount="148" Body="&lt;p&gt;i have one problem with my Code, i cant run it from terminal but from GUI sometimes work sometimes wont open and have some errors when open, i am reinstalled it couple of times but nothing, i was deleted &lt;code&gt;./locale/share/io.elementary.code&lt;/code&gt; folder but nothing happens. whan i run from terminal i got this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;milos@mobileWS:~$ io.elementary.code&#xA;[WARNING 11:57:50.838753] [GLib-GObject] invalid cast from 'CodeWelcomeView' to 'ScratchWidgetsDocumentView'&#xA;Segmentation fault&#xA;milos@mobileWS:~$ io.elementary.code --new-window&#xA;[WARNING 11:58:05.479810] [GLib-GObject] invalid cast from 'CodeWelcomeView' to 'ScratchWidgetsDocumentView'&#xA;Segmentation fault&#xA;milos@mobileWS:~$ io.elementary.code %U&#xA;[WARNING 11:58:14.884610] [GLib-GObject] invalid cast from 'CodeWelcomeView' to 'ScratchWidgetsDocumentView'&#xA;Segmentation fault&#xA;milos@mobileWS:~$ io.elementary.code --new-tab&#xA;[WARNING 11:58:28.214672] [GLib-GObject] invalid cast from 'CodeWelcomeView' to 'ScratchWidgetsDocumentView'&#xA;Segmentation fault&#xA;milos@mobileWS:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and there is some pictures when try to open from GUI, first one is width options New Window and second is with New Document:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Mc0Xy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mc0Xy.png&quot; alt=&quot;open with option New Window&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/m0BQN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m0BQN.png&quot; alt=&quot;open with option New Document&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15493" LastActivityDate="2019-04-23T10:10:42.157" Title="io.elementary.code wont run on juno" Tags="|code|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18091" PostTypeId="1" CreationDate="2019-01-28T14:52:03.953" Score="0" ViewCount="111" Body="&lt;p&gt;except automatic updates I have no interface from Steam at all since I tried to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doesn't somebody have this problem?&lt;/p&gt;&#xA;" OwnerUserId="17177" LastActivityDate="2024-02-02T01:07:30.847" Title="Steam won't show any interface to me (except automatic updates)" Tags="|applications|steam|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18092" PostTypeId="2" ParentId="18091" CreationDate="2019-01-28T15:46:02.800" Score="0" Body="&lt;p&gt;open steam from the terminal and tell us that it appears in the terminal.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-01-28T15:46:02.800" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18093" PostTypeId="2" ParentId="18085" CreationDate="2019-01-28T16:16:47.837" Score="0" Body="&lt;p&gt;install the latest MESA drivers, add the official repositories and them open terminal and do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1º &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2º &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3º &lt;code&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4º &lt;code&gt;sudo apt update&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;5º &lt;code&gt;sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6º &lt;code&gt;sudo apt install libvulkan1 mesa-vulkan-drivers vulkan-utils&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They work very well, even in games. if u want privative drivers i have a video for install privative drivers: &lt;a href=&quot;https://youtu.be/_zDLT9wQHmU&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/_zDLT9wQHmU&lt;/a&gt; (only if open drivers do not work)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will also try to install video codec:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;source:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://translate.google.cl/translate?hl=es-419&amp;amp;sl=es&amp;amp;tl=en&amp;amp;u=https%3A%2F%2Fwww.muylinux.com%2F2017%2F03%2F28%2Fubuntu-ppa-mesa%2F&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.muylinux.com/2017/03/28/ubuntu-ppa-mesa/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2019-01-28T16:22:47.957" LastActivityDate="2019-01-28T16:22:47.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18094" PostTypeId="2" ParentId="18071" CreationDate="2019-01-28T17:03:29.233" Score="0" Body="&lt;p&gt;I do not really understand what you want to do very well. if you intend to install the software &quot;(driver)&quot; from amd en wine, I regret to tell you that it will not work, if what you want to install is the driver provided by amd you should do this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Download the driver from the official website of amd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on the version of the driver you will need to edit the system file / etc / os-release on line 3 ID=elementary to ID=ubuntu on line 6 of VERSION_ID = &quot;5.0&quot; to VERSION_ID = &quot;18.04&quot; (open &quot;files&quot; with administrator privileges for to be able to make the change).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do not know that, it will say OS not supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that open the folder where the driver is with the terminal and put there:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./amdgpu-pro-install -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(this installs Base kernel, Accelerated graphics, Multimedia table, OpenGL Pro, Pro Vulkan, Pro OpenCL).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing everything correctly edit the system file / etc / os-release again, on line 3 ID=elementary on line 6 of VERSION_ID = &quot;18.04&quot; to VERSION_ID = &quot;5.0&quot; to leave that file as it was before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=_zDLT9wQHmU&amp;amp;t=68s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=_zDLT9wQHmU&amp;amp;t=68s&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cya&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-01-28T17:03:29.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18095" PostTypeId="1" CreationDate="2019-01-28T17:23:38.793" Score="1" ViewCount="129" Body="&lt;p&gt;team - I´m surprised about the functionality and beauty of your operation system. Unfortunately I failed to fix the following screen-bug:&#xA;Whenever I started eOS 5.0 the screen shuts down after exately 19sec., I tried - rotation lock, energy saving off, automatic login etc. but nothing helps. I can turn the computer on again and after 19sec. the screen turns black again.&lt;br&gt;&#xA;Only if I change the BIOS from &quot;splash quite&quot; to &quot;nomodeset&quot; the screen keeps stable with an awful resolution of course. Alternatively I can run the system as a life-system, the resolution is high and the screen stable, but that's not what I plan to do for the long go. &#xA;I even failed in finding actual Intel Graphics drivers for eOS :-(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanx for helping hints! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Machine-DATA&#xA;PRO Intel Atom x5-Z8350 &#xA;GRA Intel HD Graphics (Cherry Trail)&#xA;MEM 2048 MB &#xA;MON 11.6' 16:9, 1920 x 1080 Pixel 190 PPI, Capacitive, IPS&lt;/p&gt;&#xA;" OwnerUserId="17207" LastActivityDate="2019-01-29T18:27:54.413" Title="Touchscreen Netbook eOS 5.0 problem" Tags="|release-juno|touchscreen|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18096" PostTypeId="1" AcceptedAnswerId="18337" CreationDate="2019-01-28T18:09:47.900" Score="1" ViewCount="725" Body="&lt;p&gt;I'm new in this forum , I expect to install the software nextcloud into my computer.&#xA;I read many many topic on this installation but never once works well at the end.&#xA;Did you have some tuto where you have already test and work well ? please&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thks in advance guys for your support,&lt;/p&gt;&#xA;" OwnerUserId="17212" LastActivityDate="2019-02-22T22:37:46.237" Title="Nextcloud installation" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18097" PostTypeId="2" ParentId="18067" CreationDate="2019-01-28T19:13:12.103" Score="2" Body="&lt;p&gt;the &quot;problem&quot; is that the Wingpanel-indicator-ayatana is no longer in elementary juno. if you want to install it, try the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?sl=es&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=es-419&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fentornosgnulinux.com%2F2018%2F08%2F15%2Fcomo-instalar-wingpanel-indicator-ayatana-en-elementary-os-juno%2F&amp;amp;edit-text=&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;resume:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&#xA;sudo add-apt-repository ppa:yunnxx/elementary&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&#xA;sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change OnlyShowIn=Unity;GNOME; to OnlyShowIn=Unity;GNOME;Pantheon;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl + O (save change) Ctrl + X (close)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-01-28T19:13:12.103" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18098" PostTypeId="1" CreationDate="2019-01-28T19:38:43.947" Score="0" ViewCount="212" Body="&lt;p&gt;I have followed the instructions given to me by the website on how to put the OS onto USB and to install it on my Sony Vaio Laptop, the specs are met by the laptop, and everything should have worked in my eyes. After installation the computer now boots flashes an error message for a second and then restarts and does the same thing repeatedly, the error is something along the lines of &quot;System BootOrder not found. Initializing defaults. Creating boot entry Boot0000&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any resolution to this?&lt;/p&gt;&#xA;" OwnerUserId="17215" LastEditorUserId="16827" LastEditDate="2019-01-29T15:52:57.340" LastActivityDate="2019-06-28T17:02:05.227" Title="Issue installing elementary on Sony Vaio laptop" Tags="|system-installation|secure-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18099" PostTypeId="1" AcceptedAnswerId="18130" CreationDate="2019-01-28T20:00:54.060" Score="1" ViewCount="1201" Body="&lt;p&gt;&lt;strong&gt;answer at bottom&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a dell xps 9360 13&quot; connected to a dell d6000.  Connecting to the display port results in a blank monitor, when I connect via hdmi it displays, as on the d6000 there is only one hdmi and 2 display ports this isn't ideal.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I connect and disconnect a monitor from the display port, both the hdmi connect monitor and the laptop screen turn on and off, so something is being registered. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how I remedy this?   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re justin's response &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe I had already installed the latest display link drivers.  When I decided to retry this process as per the answer, i get this response which I don't beleieve I got before.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Verifying archive integrity...  100%   All good.&#xA;Uncompressing DisplayLink Linux Driver 4.4.24  100%&lt;br&gt;&#xA;DisplayLink Linux Software 4.4.24 install script called: install&#xA;Distribution discovered: elementary OS 5.0 Juno&#xA;Installing&#xA;Configuring EVDI DKMS module&#xA;Registering EVDI kernel module with DKMS&#xA;Building EVDI kernel module with DKMS&#xA;Installing EVDI kernel module to kernel tree&#xA;EVDI kernel module built successfully&#xA;Installing x64-ubuntu-1604/DisplayLinkManager&#xA;Installing libraries&#xA;Installing firmware packages&#xA;Installing licence file&#xA;Adding udev rule for DisplayLink DL-3xxx/5xxx devices&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Warning: The unit file, source configuration file or drop-ins of dlm.service changed on disk. Run 'systemctl daemon-reload' to reload units.&#xA;Job for dlm.service failed because the control process exited with error code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;systemctl status dlm.service&#xA;Warning: The unit file, source configuration file or drop-ins of dlm.service changed on disk. Run 'systemctl daemon-reload' to reload units.&#xA;● dlm.service - DisplayLink Manager Service&#xA;   Loaded: loaded (/lib/systemd/system/dlm.service; static; vendor preset: enabled)&#xA;   Active: activating (auto-restart) (Result: exit-code) since Wed 2019-01-30 10:12:11 CET; 564ms ago&#xA;  Process: 16175 ExecStartPre=/bin/sh -c modprobe evdi || (dkms install evdi/4.4.24 &amp;amp;&amp;amp; modprobe evdi) (code=exited, status=1/FAILURE)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;second update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried uninstalling and reinstalling, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;but the dlm.service is still struggling. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;-- Unit dlm.service has begun starting up.&#xA;Jan 30 20:46:26 sico-XPS-13-9360 sh[17515]: modprobe: ERROR: could not insert 'evdi': Required key not available&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Jan 30 20:46:26 sico-XPS-13-9360 kernel: PKCS#7 signature not signed with a trusted key&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jan 30 20:46:26 sico-XPS-13-9360 sh[17515]: Module evdi/4.4.24 already installed on kernel 4.15.0-44-generic/x86_64&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Jan 30 20:46:26 sico-XPS-13-9360 sh[17515]: modprobe: ERROR: could not insert 'evdi': Required key not available&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jan 30 20:46:26 sico-XPS-13-9360 systemd[1]: dlm.service: Control process exited, code=exited status=1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jan 30 20:46:26 sico-XPS-13-9360 systemd[1]: dlm.service: Failed with result 'exit-code'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jan 30 20:46:26 sico-XPS-13-9360 systemd[1]: Failed to start DisplayLink Manager Service.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm reading that this error Jan 30 20:46:26 sico-XPS-13-9360 kernel: PKCS#7 signature not signed with a trusted key&lt;/p&gt;&#xA;&#xA;&lt;p&gt;might be related to secure boot being on (i dual boot with elementary and windows 10) or an nvidia driver issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Answer&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install driver as indicated in Justin's answer and disable secure boot to make sure dlm.service can function as expected&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="17216" LastEditorUserId="17216" LastEditDate="2019-01-30T20:18:59.557" LastActivityDate="2019-02-07T16:22:49.903" Title="Displayport Dell d6000 No video from Dell xps 13 via usb C" Tags="|display|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18100" PostTypeId="1" CreationDate="2019-01-28T20:40:32.157" Score="1" ViewCount="183" Body="&lt;p&gt;On elementary OS juno I tried to connect to bitmask vpn but it shows me this error: Could not find a polkit authentication agent. Please run one and try again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and I don't know what should i do, please help me...&lt;/p&gt;&#xA;" OwnerUserId="17217" LastActivityDate="2019-01-28T20:40:32.157" Title="bitmask vpn: Could not find a polkit authentication agent. Please run one and try again" Tags="|vpn|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18101" PostTypeId="1" CreationDate="2019-01-29T00:47:07.420" Score="0" ViewCount="275" Body="&lt;p&gt;When launching virtualbox, the icon appears in the launcher and disappears. Virtualbox does not open. In the terminal, I run it and get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;VirtualBox: Error -610 in supR3HardenedMainInitRuntime!&#xA;VirtualBox: dlopen(&quot;/usr/lib/virtualbox/VBoxRT.so&quot;,) failed: &amp;lt;NULL&amp;gt;&#xA;&#xA;VirtualBox: Tip! It may help to reinstall VirtualBox.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've tried reinstalling. I've done this too:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown root:root /usr &#xA;sudo chown root:root /usr/lib&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated. Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The result of ls -la /usr&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;drwxr-xr-x  10 root root  4096 Oct  3 10:20 .&#xA;drwxr-xr-x  24 root root  4096 Dec 14 17:41 ..&#xA;drwxrwxrwx   2 root root 69632 Jan 28 19:29 bin&#xA;drwxrwxrwx   2 root root  4096 Oct 30 19:41 games&#xA;drwxrwxrwx  44 root root  4096 Nov 25 10:51 include&#xA;drwxrwxrwx 146 root root 12288 Jan 28 19:29 lib&#xA;drwxrwxrwx  10 root root  4096 Oct  3 10:20 local&#xA;drwxrwxrwx   2 root root 12288 Dec 17 19:36 sbin&#xA;drwxrwxrwx 318 root root 12288 Jan 28 19:29 share&#xA;drwxrwxrwx  11 root root  4096 Jan 28 19:29 src&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17221" LastEditorUserId="16827" LastEditDate="2019-01-30T10:09:00.823" LastActivityDate="2024-03-23T04:02:35.250" Title="Virtualbox fails to launch on Juno" Tags="|virtualbox|release-juno|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18102" PostTypeId="2" ParentId="18098" CreationDate="2019-01-29T01:03:58.263" Score="1" Body="&lt;p&gt;This is likely caused by a &quot;secure boot&quot; UEFI flag in your BIOS. You'll need to reboot and press the key on your laptop to enter the BIOS (probably F2). From there, you should be able to find an option like &quot;secure boot&quot; and disable it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, if you want to update your question with exact details about your model, someone might know more specifically what you need to do.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-29T01:03:58.263" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18106" PostTypeId="2" ParentId="18017" CreationDate="2019-01-29T07:01:11.273" Score="-1" Body="&lt;p&gt;I looked around in the Elementary Keyboard Shortcuts and didn't find anything. Fortunately, this is still possible. The command line to run to show notifications is this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;wingpanel -o messages&#xA;If you open up a terminal and run that, it should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With that in mind, you can go into System Settings -&gt; Keyboard -&gt; Shortcuts. From there, select Custom and add a new shortcut (the plus icon at the very bottom). I've highlighted the added command-line shortcut in this screenshot. (You can ignore the other custom keyboard shortcuts I've added):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshot of settings showing keyboard shortcut&lt;/p&gt;&#xA;" OwnerUserId="17224" LastActivityDate="2019-01-29T07:01:11.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18121" PostTypeId="1" CreationDate="2019-01-29T10:02:43.533" Score="3" ViewCount="1641" Body="&lt;p&gt;I'm not able to make Elementary OS use ibus as a default input method (IM). I have installed ibus but I'm not sure what I have to do further. Why I think it's not used as IM is because I've de-selected the &quot;Share same input method among all applications&quot; and still when I switch the language, it is still switched globally. The other reason why I made this assumption is that the OS doesn't take into account what languages I have added in the ibus-setup settings and still uses whatever is chosen in the default settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know this question has been raised before, but I couldn't find a solution.&lt;/p&gt;&#xA;" OwnerUserId="17122" LastActivityDate="2020-04-19T04:36:44.567" Title="Elementary OS 5.0 Juno is not using ibus as input method" Tags="|keyboard|release-juno|input|keyboard-layout|ibus|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18123" PostTypeId="1" AcceptedAnswerId="18125" CreationDate="2019-01-29T10:19:21.447" Score="1" ViewCount="252" Body="&lt;p&gt;I have an HP Probook 450 G4 and I was thinking about changing from Windows to Linux. I started to read about the different distros and I totally fell in love with elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, I couldn't really find much specific information about my laptop model (except it is not on the list of verified laptops for Ubuntu). So I wanted help from people with more know-how about the topic to tell me if it could be a good fit for my laptop or to get recommendations about better alternatives.&lt;/p&gt;&#xA;" OwnerUserId="17218" LastEditorDisplayName="user212" LastEditDate="2019-01-30T09:41:20.203" LastActivityDate="2019-01-30T09:41:20.203" Title="elementary OS on HP Probook 450 G4" Tags="|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18124" PostTypeId="2" ParentId="4131" CreationDate="2019-01-29T11:06:36.190" Score="1" Body="&lt;p&gt;I was facing the same problem with SqlWorkbenchJ. I fixed it putting the .png image set in sqlworkbench.desktop under &quot;Icon&quot; into the directory /usr/share/pixmaps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, the application started to show the proper icon either in plank dock and applications menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="17238" LastActivityDate="2019-01-29T11:06:36.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18125" PostTypeId="2" ParentId="18123" CreationDate="2019-01-29T11:08:33.193" Score="1" Body="&lt;p&gt;Elementary OS (as most other Linux distros nowadays) comes with a Live Image. That means you can &quot;burn&quot; the ISO image to an USB Stick (hint: use the programm &quot;Etcher&quot; for that), plug that stick into your laptop and boot off from said USB stick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No modifications are made to your existing OS. You can try out nearly all the features like WiFi support, keyboard hotkeys, sound, ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you are certain that everything that is supposed to work actually does work you can fire up the installer and make the OS your permanent choice. During the installation you can even select between wiping the entire harddrive (and thus effectivly removing Windows) OR you can resize the existing partition and install Elementary OS alongside Windows.&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2019-01-29T11:08:33.193" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18126" PostTypeId="1" AcceptedAnswerId="18128" CreationDate="2019-01-29T12:27:52.053" Score="1" ViewCount="375" Body="&lt;p&gt;I just installed a new update from AppCenter in elementary OS 5.0.  It was one package.  According to my &lt;code&gt;apt&lt;/code&gt; history log, it was switchboard-plug-power.  This update has made my laptop unusable on a dock.  Plugging the laptop into the dock will cause no monitor to work, not even the laptop monitor and I have to force shutdown.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I revert from 2.3.5, the updated version, to 2.3.4, the previous version?&lt;/p&gt;&#xA;" OwnerUserId="16004" LastActivityDate="2019-01-29T15:50:37.863" Title="Rollback AppCenter Update" Tags="|display|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18127" PostTypeId="1" CreationDate="2019-01-29T15:05:13.167" Score="0" ViewCount="564" Body="&lt;p&gt;When I go in and try and do the os update it won't let me put in my password it keeps glitching so fast that I can't enter the password to allow the update. Anyone encounter this?&lt;/p&gt;&#xA;" OwnerUserId="17239" LastActivityDate="2024-03-15T23:06:10.730" Title="Authentication Glitch" Tags="|system-installation|updates|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18128" PostTypeId="2" ParentId="18126" CreationDate="2019-01-29T15:50:37.863" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/138284/how-to-downgrade-a-package-via-apt-get&quot;&gt;Based on this answer from Ask Ubuntu&lt;/a&gt;, there is a command line option to install the previous version of a package, but it doesn't look like Elementary's repositories still have it available:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall switchboard-plug-power=2.3.4+r609~ubuntu5.0.1&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Version '2.3.4+r609~ubuntu5.0.1' for 'switchboard-plug-power' was not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, Elementary doesn't seem to keep old versions (at all) in their repository manifest. However, I was &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/s/switchboard-plug-power/&quot; rel=&quot;nofollow noreferrer&quot;&gt;was able to find them available for direct download on Elementary's server&lt;/a&gt;. So for example if you had an AMD64 system, you would download that .deb file and install it manually.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After downloading the file, use &lt;code&gt;dpkg&lt;/code&gt; to manually install the older version. For example, if I did that with my Intel 64-bit computer, I'd do:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/s/switchboard-plug-power/switchboard-plug-power_2.3.4+r609~ubuntu5.0.1_amd64.deb&#xA;sudo dpkg -i switchboard-plug-power_2.3.4+r609~ubuntu5.0.1_amd64.deb &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It would then proceed to downgrade the package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: warning: downgrading switchboard-plug-power from 2.3.5+r634~ubuntu5.0.1 to 2.3.4+r609~ubuntu5.0.1&#xA;(Reading database ... 306254 files and directories currently installed.)&#xA;Preparing to unpack switchboard-plug-power_2.3.4+r609~ubuntu5.0.1_amd64.deb ...&#xA;Unpacking switchboard-plug-power (2.3.4+r609~ubuntu5.0.1) over (2.3.5+r634~ubuntu5.0.1) ...&#xA;Setting up switchboard-plug-power (2.3.4+r609~ubuntu5.0.1) ...&#xA;Processing triggers for dbus (1.12.2-1ubuntu1) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want to prevent future automatic upgrades, you can run &lt;code&gt;apt-mark hold switchboard-plug-power&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-29T15:50:37.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18129" PostTypeId="1" CreationDate="2019-01-29T16:46:13.643" Score="1" ViewCount="81" Body="&lt;p&gt;Just installed Elementary and I'm really enjoying it - my only problem is that the buttons on the trackpad don't work. I am able to navigate by tapping the trackpad, but not by using the physical left/right buttons (which click). As far as I can tell it has a Synaptics track pad.&lt;/p&gt;&#xA;" OwnerUserId="17240" LastActivityDate="2019-01-29T16:46:13.643" Title="Buttons on trackpad don't work (Lenovo IdeaPad z410)" Tags="|touchpad|drivers|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18130" PostTypeId="2" ParentId="18099" CreationDate="2019-01-29T17:58:43.557" Score="0" Body="&lt;p&gt;The dell docking stations use displaylink chips to emulate additional displays.  I have seen this issue with the display ports and installing the &lt;a href=&quot;https://support.displaylink.com/knowledgebase/articles/684649-how-to-install-displaylink-software-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;latest display manager software&lt;/a&gt; for display link seems to remedy it.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I uninstalled my display manager software and rebooted and tried a clean install with the following as the result:  &lt;a href=&quot;https://i.stack.imgur.com/g8sNc.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g8sNc.gif&quot; alt=&quot;displaymanagerinstall&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My guess is that it isn't installing correctly and that maybe why your dock is failing to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for other docks, I have used the D3100, D6000, and will so be testing with a TB16 dock.  I have the XPS 15 9570, which is more power hungry.  I don't think you will find one that just works.  From my searching around, most of the use the DisplayLink chipset which will need the DisplayManager software to work.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;For future viewers:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I am currently using the TB16 and it is by far the best dock out of the others I have tried. It is the first dock I can actually hot swap with and haven't had a single issue with it in the two weeks of use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, The D3100 connects via USB and I found I can't use my integrated camera because it uses all the USB bandwidth for screen replication.&lt;/p&gt;&#xA;" OwnerUserId="16603" LastEditorUserId="16603" LastEditDate="2019-02-07T16:22:49.903" LastActivityDate="2019-02-07T16:22:49.903" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18131" PostTypeId="1" CreationDate="2019-01-29T18:34:07.250" Score="1" ViewCount="187" Body="&lt;p&gt;I've been scouring the Internet for help on the matter but nothing I've found has helped me (mostly because I'm unfamiliar with Xrandr and how to use it, but also because I thought answers to other questions were unclear). This is why I'm asking my own question, and I know nobody likes repeat questions, but I don't know what else to do at this point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've got Elementary OS 5.0 installed on a Dell Optiplex GX520, and I'm using a Dell E773c CRT display (because it's the best spare display I have). Its native resolution is 1280x1024, and its native refresh rate is 85Hz. Right now, it's running at 75Hz, and this causes weird graphical distortion on the display and it drives my eyes nuts, so I've been trying to get it back up to 85Hz.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From what I gathered online, Xrandr doesn't apply display settings across reboots (and I don't know how to apply those settings in Xrandr anyways) and I don't want to have to be changing the refresh rate every reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you know of a control panel application that is a little more in-depth and advanced than the default Elementary OS settings application, I'd very much like to know about it. Can anyone help me out? &lt;/p&gt;&#xA;" OwnerUserId="17241" LastActivityDate="2019-01-29T18:34:07.250" Title="Trying to permanently change screen refresh rate" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18133" PostTypeId="1" CreationDate="2019-01-29T19:22:13.083" Score="3" ViewCount="1510" Body="&lt;p&gt;Anytime I change the desktop background the panel transparency changes to full transparent for any range of colors other than the default background it ships with.. this leads to hard to read text. Thanks&lt;/p&gt;&#xA;" OwnerUserId="17242" LastEditorUserId="16872" LastEditDate="2019-02-20T01:56:00.660" LastActivityDate="2019-04-26T19:51:06.667" Title="Panel transparency?" Tags="|wingpanel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18134" PostTypeId="2" ParentId="18064" CreationDate="2019-01-29T21:42:16.207" Score="1" Body="&lt;p&gt;In the event that you'd like something to run during boot, you can utilize systemd services. I initially used &lt;a href=&quot;https://linuxconfig.org/how-to-automatically-execute-shell-script-at-startup-boot-on-systemd-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;this guide&lt;/a&gt; to assist me in setting up a startup run for a sleep inhibitor, but it can be modified for your uses as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The script file (.sh file) would instead have your &lt;code&gt;sudo xhost +&lt;/code&gt; and &lt;code&gt;sudo /etc/init.d/spacenavd restart&lt;/code&gt; commands in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An example, here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;&#xA;sudo xhost +&#xA;sudo /etc/init.d/spacenavd restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You may choose to name this script whatever you'd like, but I definitely recommend naming it something relevant to the commands inside it just for future reference. Placing it in a directory like &lt;code&gt;/usr/local/bin/&lt;/code&gt; where it can reside safely is also a good idea. If you have it resting in your home directory or something of the sort and it disappears, your system is going to be looking for a file that doesn't exist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this does what you're looking for! Feel free to comment with results, and I can edit my answer accordingly to accommodate for them.&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-01-29T21:42:16.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18135" PostTypeId="2" ParentId="18064" CreationDate="2019-01-29T21:54:39.300" Score="0" Body="&lt;p&gt;They're probably not going to work because &lt;code&gt;sudo&lt;/code&gt; is expecting you to enter a password to run them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can exempt those applications by creating special rules for them in sudoers, such that they can be executed without a password. &lt;a href=&quot;https://askubuntu.com/questions/159007/how-do-i-run-specific-sudo-commands-without-a-password&quot;&gt;Here's some documentation on how to do that&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-01-29T21:54:39.300" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18137" PostTypeId="2" ParentId="18133" CreationDate="2019-01-30T07:46:41.217" Score="4" Body="&lt;p&gt;In System Settings -&gt; Desktop -&gt; Appearance there is a Panel translucency switch which can turn off the panel transparency.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-01-30T07:46:41.217" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18138" PostTypeId="2" ParentId="18087" CreationDate="2019-01-30T07:59:22.337" Score="0" Body="&lt;p&gt;When your computer starts and the Ubuntu/Elementary OS bootloader kicks in there should be some options available like &quot;boot normally&quot;, &quot;boot in secure mode&quot;, &quot;Start Windows&quot; (if the installer detected your Windows installation successfully).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press any arrow key to stop the countdown. Then press &quot;e&quot; to edit the first entry (&quot;Start Elementary&quot; or similar). You will see the boot commands that will start Elementary OS. Look for the line with &quot;quiet splash&quot; in it. Go there, add your &quot;nomodeset&quot; before or after (shouldn't matter) and press &quot;F10&quot; or &quot;CTRL + X&quot; to execute this new boot configuration. Your system should start up normally (like it does when you use the live usb).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now to make this changes permanent, you need to edit the grub boot config. Edit the file &lt;code&gt;/etc/default/grub&lt;/code&gt; as root. Look for the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and add &quot;nomodeset&quot; before, after or between the two options (again, the position doesn't matter). When you're finished, save your changes, exit the editor and update your grub configuration:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now your changes are permanent and should even survive a kernel upgrade.&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2019-01-30T07:59:22.337" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18139" PostTypeId="1" AcceptedAnswerId="18144" CreationDate="2019-01-30T12:26:38.967" Score="1" ViewCount="501" Body="&lt;p&gt;How to set tilix terminal as default?&lt;/p&gt;&#xA;" OwnerUserId="17178" LastActivityDate="2019-01-30T21:32:00.143" Title="Tilix terminal as default on EOS 5.0 juno" Tags="|release-juno|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18140" PostTypeId="1" CreationDate="2019-01-30T16:57:41.017" Score="1" ViewCount="24" Body="&lt;p&gt;So I booted up ElementaryOS in a VM, and I installed the OS onto the USB as you would install it to a regular SSD/HDD. So I have a portable USB OS. Pretty neat!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Except that it doesn't work after about 3 reboots. It then just boots to a flashing cursor of sorts. I haven't done any updates or anything. It just seems to stop working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This has happened more than once too. What could be causing the problem?&lt;/p&gt;&#xA;" OwnerUserId="17245" LastActivityDate="2019-01-30T16:57:41.017" Title="Dell XPS 15 9560. Installed to Corsair Voyager GTX USB-SSD. Stuck at black flashing cursor" Tags="|boot|laptop|dell|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18141" PostTypeId="2" ParentId="18064" CreationDate="2019-01-30T17:13:43.770" Score="2" Body="&lt;p&gt;So I solved my problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It turned out I did not actually need to use sudo with these commands.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did was to save the 2 commands (without sudo) in a bash script in my home folder.  Then I gave it permissions to be executed by me and my group.  Then, in elementary juno, I went to System Settings &gt; Applications &gt; Startup and clicked the + in bottom left to add the script.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This action creates a file in ~/.config/autostart/ with basic info that results in something very similar to my original screenshot, named Custom Command and with a stock icon.  I was able to clean up the look by editing basic info in this file, like name, and adding an icon in ~/.local/share/icons/hicolor/128x128/apps/ called spacenavd.png.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To test is, I include sudo in front of both commands in the bash script, and execute it from terminal, then in terminal, I am prompted for a password. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I do not include sudo in front of either command in the script, and execute it from terminal, then this dialogue box pops in and prompts me to enter my password:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8VTDi.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8VTDi.jpg&quot; alt=&quot;spacenavd auth dialogue&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I boot up and login, I am not given this dialogue, and I believe that's because I have just logged in.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is how it looks now:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B88cM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B88cM.png&quot; alt=&quot;Spacenav startup item in elementary juno&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the spacenavd.sh file in my home folder&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#! /bin/bash&#xA;&#xA;xhost +&#xA;/etc/init.d/spacenavd restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The permissions on the script&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rxqIU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rxqIU.jpg&quot; alt=&quot;spacenavd.sh permissions&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dekstop file at ~/.config/autostart/ which I renamed spacenavd.desktop&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name[en_US]=Spacenav&#xA;Comment[en_US]=3D Controller&#xA;Exec=./spacenavd.sh&#xA;Icon=spacenavd&#xA;X-GNOME-Autostart-enabled=true&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And the spacenavd icon ~/.local/share/icons/hicolor/128x128/apps/spacenavd.png&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bZhKg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bZhKg.png&quot; alt=&quot;spacenavd icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://rads.stackoverflow.com/amzn/click/com/B00FJRRVII&quot; rel=&quot;nofollow noreferrer&quot; rel=&quot;nofollow noreferrer&quot;&gt;The 3Dconnexion SpaceMouse Wireless 3D Mouse 2.4GHz via Micro-USB (3DX-700043)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My setup running on a model A1398 macbook pro 2012:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cKiex.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cKiex.png&quot; alt=&quot;elementary juno macbook pro 2012 model A1398&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16967" LastEditorUserId="16967" LastEditDate="2019-01-31T17:08:28.563" LastActivityDate="2019-01-31T17:08:28.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18144" PostTypeId="2" ParentId="18139" CreationDate="2019-01-30T21:32:00.143" Score="1" Body="&lt;p&gt;Open the &lt;code&gt;dconf editor&lt;/code&gt; from the application list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Browse to &lt;code&gt;org/gnome/desktop/applications/terminal/exec&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncheck &lt;code&gt;Use default value&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type &lt;code&gt;tilix&lt;/code&gt; as a custom value&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the check mark in the bottom right of the window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ApNZL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ApNZL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now browse to &lt;code&gt;org/gnome/desktop/applications/terminal/exec-args&lt;/code&gt; (one level up from 'exec')&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncheck &lt;code&gt;Use default value&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remove the &lt;code&gt;-e&lt;/code&gt; from the custom value&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click the check mark in the bottom right side of the Window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You're Done!&lt;/p&gt;&#xA;" OwnerUserId="17127" LastActivityDate="2019-01-30T21:32:00.143" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18145" PostTypeId="2" ParentId="18085" CreationDate="2019-01-30T22:17:31.040" Score="1" Body="&lt;p&gt;Thanks a lot ! I did many research (and re-install ^^&quot;) before seeing your answer... and i found a solution which, i think, is interesting&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you're installing Elementary OS, he ask if you want to &#xA;&quot;Install third-party software for graphics and Wi-Fi hardware, Flash, MP3 and other media&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's the &quot;problem&quot;. Without this checked, i had no problems for graphics. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was happy until the moment I would install another thing. It was the&lt;code&gt;ubuntu-restricted-extras&lt;/code&gt; package. And then the problem was here again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it's an installation called when you tick the checkbox before (confirmation ?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i installed &lt;code&gt;synaptic&lt;/code&gt;, and i removed &lt;code&gt;ubuntu-restricted-extras&lt;/code&gt; (and &lt;code&gt;ubuntu-restricted-addons&lt;/code&gt; also).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem was always here but with &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; and a reboot, it was OK. Problem solved.&lt;/p&gt;&#xA;" OwnerUserId="17193" LastActivityDate="2019-01-30T22:17:31.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18146" PostTypeId="1" CreationDate="2019-01-31T00:35:29.850" Score="0" ViewCount="364" Body="&lt;p&gt;Like i said, today i wanted to install some apps from app center and when i click it to install after a couple seconds an error messeage pop up. I think it is for some missing packages or repostorys from an unfinished system update, but when i try to update again i get the same error even the synaptick package manager gives me an error.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/eCmnG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eCmnG.png&quot; alt=&quot;This is the error i get&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17248" LastActivityDate="2019-05-08T10:22:59.210" Title="Can't install anything on juno" Tags="|software-installation|appcenter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18148" PostTypeId="2" ParentId="18146" CreationDate="2019-01-31T08:16:41.007" Score="0" Body="&lt;p&gt;Are you able to browse any websites? The error message states that there is an error while resolving the address of the update server (mx.archive.ubuntu.com). It also says that this particular server ist not (yet) available, so maybe it is a temporal issue. Have you tried again a few hours or days later?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you are not able to browse any sites I would suspect some issue with your DNS resolver. Try using a resolver that is not issued by your ISP, like 1.1.1.1, 9.9.9.9, or if your willing to give Google your information use 8.8.8.8 or 8.8.4.4.&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2019-01-31T08:16:41.007" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18150" PostTypeId="1" AcceptedAnswerId="18174" CreationDate="2019-01-31T19:22:06.090" Score="0" ViewCount="234" Body="&lt;pre&gt;&lt;code&gt;E: http://apt.last.fm/debian stable InRelease is not (yet) available (Could not resolve 'apt.last.fm')&#xA;W: Target Packages (non-free/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Translations (non-free/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11 (non-free/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-small (non-free/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons (non-free/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-hidpi (non-free/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target DEP-11-icons-large (non-free/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target CNF (non-free/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/sources.list:1 and /etc/apt/sources.list.d/spotify.list:1&#xA;W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-small (main/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target DEP-11-icons-large (main/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;W: Target CNF (main/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list.d/google-chrome.list:3 and /etc/apt/sources.list.d/google.list:1&#xA;E: The repository 'http://ppa.launchpad.net/gotwig/weekly/ubuntu bionic Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is the message I get after opening the AppCenter app within a popup.&#xA;Unfortunaly I don't get the errors there.&#xA;Could someone advise me ? I yet reinstalled the AppCenter but it is all the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="17177" LastActivityDate="2019-02-03T00:08:37.403" Title="AppCenter Failed to Fetch Updates" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18151" PostTypeId="2" ParentId="18087" CreationDate="2019-01-31T22:10:13.903" Score="1" Body="&lt;p&gt;I ended up solving my own problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I swapped monitors to an older one that connects through VGA. I noticed that with that monitor, I was getting the desktop background image and the cursor, but nothing else. I looked around and found someone who had a similar issue and was able to solve it by pressing &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;P&lt;/kbd&gt; which would toggle between different displays. I tried that, and sure enough, after a couple presses, I had the full desktop including plank and wingpanel on the screen. I checked the display settings and could see that two displays are detected, one being detected as &quot;Built-in Device&quot;, even though only one is hooked up. I believe this is because the motherboard has an LVDS port, but I am not sure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I had been tweaking things I decided to do a fresh install to see if any of those adjustments had been necessary in the first place. To install this time around I did NOT use &lt;code&gt;nomodeset&lt;/code&gt; on the live USB and used the old monitor connected through VGA. This time, the screen was not blank, but like before, I only had the wallpaper and cursor. I pressed &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;P&lt;/kbd&gt; a couple of times and eventually had the install wizard on my screen. I installed elementary OS with no issues, restarted, and had the full desktop. &lt;code&gt;nomodeset&lt;/code&gt;, again, not necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So now I could confirm that elementary OS was installed and working and using the proper display driver. However, when I plugged in my HDMI display, it would cut signal from my VGA monitor and the HDMI monitor itself would say &quot;No Signal.&quot; I tried using &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;P&lt;/kbd&gt; to see if that would help, but it did not in this case. If I unplugged it, my VGA monitor would receive signal once again and have the full desktop available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To test if the monitor was actually being detected, I typed &lt;code&gt;xrandr&lt;/code&gt; on the terminal, connected the monitor (once again everything was blank), and pressed enter. I disconnected it again to see the results which did show that HDMI-1 had been detected as connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I dug around for the simplest solution I could find and eventually decided to try &lt;code&gt;xrandr --output HDMI-1 --primary --mode 1920x1080&lt;/code&gt; on the terminal. Like before, I typed it in in the terminal before plugging in my HDMI monitor. I plugged in the monitor (again, both monitors completely blank) and pressed enter. This did make a difference and I finally had video on the HDMI monitor. I ran &lt;code&gt;xrandr --output VGA-1 --mode 1024x768&lt;/code&gt; and now also had the second monitor working. I went to Settings&gt;Display to adjust placement with no issues. I should note that the monitors are not perfectly detected. Both show up as &quot;Ancor Communications Inc 24&quot;&quot; even though the VGA one is a Sony 15&quot; monitor. In Loki, they were differentiated properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any changes I made through Settings&gt;Display did not stick so in order to force my display settings, I added the two commands (&lt;code&gt;xrandr --output HDMI-1 --primary --mode 1920x1080&lt;/code&gt; and &lt;code&gt;xrandr --output VGA-1 --mode 1024x768&lt;/code&gt;) to run automatically at start up by adding them Settings&gt;Applications&gt;Startup. I did a reboot and everything worked okay.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last big issue I encountered was that these settings did not apply to Greeter so whenever I logged out, both monitors were blank unless I unplugged the HDMI monitor to have video display on the VGA port. To solve this, I copied ~/.config/monitors.xml to /var/lib/lightdm/.config .&lt;/p&gt;&#xA;" OwnerUserId="17202" LastActivityDate="2019-01-31T22:10:13.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18152" PostTypeId="1" CreationDate="2019-02-01T01:07:40.987" Score="1" ViewCount="104" Body="&lt;p&gt;I am a Windows user who recently switched to elementary os. I want to know if it would be possible to assign the &quot;backspace&quot; key to the &quot;back&quot; command   when I'm using a browser or anything else (except while typing) ?&lt;/p&gt;&#xA;" OwnerUserId="17256" LastActivityDate="2019-02-01T01:07:40.987" Title="Custom keyboard shortcut for &quot;back&quot;" Tags="|release-juno|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18153" PostTypeId="1" CreationDate="2019-02-01T04:53:58.447" Score="1" ViewCount="186" Body="&lt;p&gt;I wanted to install elementary+ icons, but got an error while trying to add devs PPA:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/cybre/elementaryplus/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried various solutions I found but none of them worked. Can you please help?&lt;/p&gt;&#xA;" OwnerUserId="17257" LastActivityDate="2019-02-01T05:57:03.807" Title="Can't add a repo" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18154" PostTypeId="2" ParentId="18153" CreationDate="2019-02-01T05:57:03.807" Score="1" Body="&lt;p&gt;This PPA has no releases for Juno (Bionic). You can force it by changing &quot;Bionic&quot; to &quot;Xenial&quot; in repo list file (/etc/apt/sources.list.d/) but I wouldn't recommend it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try these instead &lt;a href=&quot;https://github.com/btd1337/urutau-icons&quot; rel=&quot;nofollow noreferrer&quot;&gt;Uratu icons&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-02-01T05:57:03.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18155" PostTypeId="1" CreationDate="2019-02-01T11:54:55.340" Score="1" ViewCount="65" Body="&lt;p&gt;my app store wont update because of this error 'E: The repository '&lt;a href=&quot;http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu&lt;/a&gt; bionic Release' does not have a Release file'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i tried this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository --remove ppa:&lt;a href=&quot;http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu&lt;/a&gt; bionic Release&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Error: need a single repository as argument&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any help would be appreciated&lt;/p&gt;&#xA;" OwnerUserId="17260" LastActivityDate="2019-02-01T15:47:15.683" Title="PPA issues unable to update app store" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18157" PostTypeId="2" ParentId="18155" CreationDate="2019-02-01T15:47:15.683" Score="1" Body="&lt;p&gt;It's saying that particular PPA doesn't yet support Juno (Bionic/18.04).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remove the files &lt;code&gt;/etc/apt/sources.list.d/ubuntu-wine*&lt;/code&gt; and you should be able to update again.&lt;/p&gt;&#xA;" OwnerUserId="17127" LastActivityDate="2019-02-01T15:47:15.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18158" PostTypeId="1" CreationDate="2019-02-01T16:56:02.710" Score="1" ViewCount="59" Body="&lt;p&gt;first post so bear with me. Installed elementary OS Juno on a 6y old eMachine using default settings. All went well until the first boot. I can see the desktop and toolbar at the bottom for a second and then it goes blank although I see the top right icons (battery, turn off icon). I can get to the console.&#xA;I did some online research and found some bug related infos but no really fitted what is happening to me. I tried to restart the lightdm and other tips but nada :( Thanks for your support of a newbie :)&lt;/p&gt;&#xA;" OwnerUserId="17263" LastActivityDate="2019-02-03T02:48:04.260" Title="elementary OS Juno - desktop vanishes after boot" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18159" PostTypeId="1" CreationDate="2019-02-01T16:56:04.440" Score="0" ViewCount="338" Body="&lt;p&gt;How can i fix those broken packages? i cant's install anything on the system and i think tha's the error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RyM4g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RyM4g.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QExzV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QExzV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/HRI0z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HRI0z.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17248" LastActivityDate="2019-03-02T09:46:26.153" Title="How to fix broken packages?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18160" PostTypeId="1" CreationDate="2019-02-01T18:05:03.403" Score="1" ViewCount="28" Body="&lt;p&gt;I have a Macbook pro early 2015 with bootcamp Windows 10. I have installed elementary os to usb flash drive and it boots up via bootcamp windows disk option via GNU Grub. However, now, Windows does not boot without usb showing GNU Grub Version 2.02. I know that I can boot writing some commands there but is there any way of booting automatically?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="17265" LastActivityDate="2019-02-01T18:05:03.403" Title="Cannot boot to bootcamp Windows10 without usb" Tags="|boot|grub|macbook|microsoft-windows|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18161" PostTypeId="1" CreationDate="2019-02-01T18:09:51.760" Score="0" ViewCount="421" Body="&lt;p&gt;Google chrome is not in the install list in app center.  Does it get updated anyway? If it does not, how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="17266" LastActivityDate="2019-02-03T15:07:19.203" Title="Google chrome does not appear in installed list in app center" Tags="|updates|google-chrome|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18162" PostTypeId="1" CreationDate="2019-02-01T19:40:11.050" Score="0" ViewCount="118" Body="&lt;p&gt;&lt;strong&gt;Hardware:&lt;/strong&gt; Lenovo Y700 (i7-6700HQ, 8GB, 960M)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Setup:&lt;/strong&gt; Dual Boot with Windows 10 on an HDD. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Worked fine for a couple of weeks. Now it falls down to a shell every time I try to boot the Linux. Windows works fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7FEB3.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7FEB3.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17255" LastEditorUserId="16827" LastEditDate="2019-02-02T07:05:27.160" LastActivityDate="2024-03-18T21:04:25.593" Title="Unable to boot the OS - namespace lookup failure" Tags="|dual-boot|shell|acpi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18163" PostTypeId="1" CreationDate="2019-02-01T20:38:06.860" Score="1" ViewCount="163" Body="&lt;p&gt;Hi there i tried the sync my calendar with my own owcloud (caldav).&#xA;I get no data from the calendar, but i can set up new events which are updated to my owncloud calendar. &#xA;So it seems working only one way.&#xA;Any suggestions ? If you want i can add some logs.&lt;/p&gt;&#xA;" OwnerUserId="17268" LastActivityDate="2024-04-06T01:06:15.683" Title="Elementary Calendar doesn't sync with owncloud 10.0.10" Tags="|release-juno|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18164" PostTypeId="1" CreationDate="2019-02-02T04:47:17.110" Score="1" ViewCount="861" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Piy2q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Piy2q.png&quot; alt=&quot;What is the custom command to &amp;quot;Show Desktop&amp;quot; for hot corners?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wanted to have a &quot;Show Desktop&quot; like in the windows ( when I point the mouse to bottom right corner it will show the desktop )&lt;/p&gt;&#xA;" OwnerUserId="16922" LastActivityDate="2019-02-02T13:06:06.523" Title="What is the custom command to &quot;Show Desktop&quot; for hot corners?" Tags="|release-juno|hot-corners|show-desktop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18166" PostTypeId="2" ParentId="16773" CreationDate="2019-02-02T12:30:30.947" Score="1" Body="&lt;p&gt;Before anything, before any input or &lt;em&gt;sudo&lt;/em&gt; code in Terminal, I believe it is worth checking in the Apps window, start typing &lt;strong&gt;Software&lt;/strong&gt; and it will show something like &lt;strong&gt;Software &amp;amp; Updates&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, in the 5th tab, it shows &lt;strong&gt;&lt;em&gt;Additional Drivers&lt;/em&gt;&lt;/strong&gt; and from there I could select an &lt;strong&gt;unknown device&lt;/strong&gt; to &lt;em&gt;use dkms source for the r8812au network driver&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps from a clean install and without internet. If you can, just connect it with a cable or another USB adapter and spare yourself the hassle by doing this.&lt;/p&gt;&#xA;" OwnerUserId="17276" LastActivityDate="2019-02-02T12:30:30.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18167" PostTypeId="2" ParentId="17162" CreationDate="2019-02-02T12:33:09.817" Score="1" Body="&lt;p&gt;I posted this in another thread and it may be of help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before anything, before any input or &lt;em&gt;sudo&lt;/em&gt; code in Terminal, I believe it is worth checking in the Apps window, start typing &lt;strong&gt;Software&lt;/strong&gt; and it will show something like &lt;strong&gt;Software &amp;amp; Updates&lt;/strong&gt;. It is on the upper-left corner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, in the 5th tab, it shows &lt;strong&gt;&lt;em&gt;Additional Drivers&lt;/em&gt;&lt;/strong&gt; and from there I could select an &lt;strong&gt;unknown device&lt;/strong&gt; to &lt;em&gt;use dkms source for the r8812au network driver&lt;/em&gt;. (mine is 8812au, but well, choose whichever you need).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps from a clean install and without internet. If you can, just connect it with a cable or another USB adapter and spare yourself the hassle by doing this.&lt;/p&gt;&#xA;" OwnerUserId="17276" LastActivityDate="2019-02-02T12:33:09.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18168" PostTypeId="2" ParentId="18164" CreationDate="2019-02-02T13:06:06.523" Score="1" Body="&lt;p&gt;As far as I know, there is no way to run a command after leaving a hot corner, but you can toggle &quot;Show Desktop&quot; when you touch a hot corner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've got the following script from &lt;a href=&quot;https://www.tech-spy.co.uk/2018/09/how-to-add-show-desktop-icon-to-ubuntu-dock/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; article:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;You first need to install wmctrl (&lt;code&gt;sudo apt install wmctrl&lt;/code&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Save the script:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;status=&quot;$(wmctrl -m | grep &quot;showing the desktop&quot; | sed -r 's/(.*)(ON|OFF)/\2/g')&quot;&#xA;&#xA;if [ $status == &quot;ON&quot; ]; then&#xA;wmctrl -k off&#xA;else&#xA;wmctrl -k on&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Make it executable: &lt;code&gt;chmod +x /Path/to/script.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Set the command for the hot corner to &lt;code&gt;/Path/to/script.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This will check if the desktop is currently shown and toggle it using wmctrl:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OIpoK.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OIpoK.gif&quot; alt=&quot;Demo&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17277" LastActivityDate="2019-02-02T13:06:06.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18169" PostTypeId="1" CreationDate="2019-02-02T13:37:56.260" Score="1" ViewCount="363" Body="&lt;p&gt;I want to change the appearance of those 3 buttons, but I'm not sure where they are located on elementaryOS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see people talk a lot about Elementary Tweaks, but I don't know much about it. I know Linux can be funny, so I don't want to install a repository that somehow messes up my OS. Also, I'm not sure if there are any backdoors in it or not. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is why I just want to do this manually, if it is even possible. &lt;/p&gt;&#xA;" OwnerUserId="17278" LastActivityDate="2019-02-02T13:37:56.260" Title="Close, minimize, and maximize button icon locations" Tags="|icons|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18170" PostTypeId="2" ParentId="18161" CreationDate="2019-02-02T14:44:59.400" Score="1" Body="&lt;p&gt;Google Chrome has to be &lt;a href=&quot;https://www.google.com/chrome/&quot; rel=&quot;nofollow noreferrer&quot;&gt;downloaded&lt;/a&gt; and installed either with dpkg or a graphical front end, such as &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing, you can safely delete the .Deb package, as the application will appear under the 'updates' tab in your AppCenter, and can be removed from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Such an operation is called sideloading, and while generally discouraged, it is also at time necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&#xA;On my computers, chrome doesn't show up in the AppCenter either, after installing it through the above stated methods. They do however, both, run the current version of it, so yes, &lt;strong&gt;it does get updates&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="9615" LastEditorUserId="9615" LastEditDate="2019-02-03T15:07:19.203" LastActivityDate="2019-02-03T15:07:19.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18171" PostTypeId="1" CreationDate="2019-02-02T16:32:46.673" Score="0" ViewCount="362" Body="&lt;p&gt;Laptop boots the live version and wireless works fine. I install full version, wireless does not work. Install bcmwl-kernel-souce; wireless works. An update or other change comes along, wireless quits. Is there a permanent fix? Why does it work fine on the live version, and not after an install?&lt;/p&gt;&#xA;" OwnerUserId="12405" LastActivityDate="2024-03-15T17:07:55.970" Title="bcmwl-kernel-source" Tags="|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18172" PostTypeId="1" CreationDate="2019-02-02T19:58:00.350" Score="1" ViewCount="161" Body="&lt;p&gt;Trying to run a live version USB drive for testing - elementary OS 5.0 Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same USB runs the build just fine on my 2015 iMac but I get no trackpad and keyboard function on my MacBook Air Retina 2018.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a build with all up to date drivers included? Am I missing something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance for any help.&lt;/p&gt;&#xA;" OwnerUserId="17281" LastActivityDate="2019-02-02T19:58:00.350" Title="Trackpad and keyboard not working on MacBook Air Retina 2018" Tags="|keyboard|touchpad|macbook|usb|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18173" PostTypeId="2" ParentId="18158" CreationDate="2019-02-02T21:05:34.197" Score="-1" Body="&lt;p&gt;I run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&#xA;sudo apt full-upgrade&#xA;&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and all good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope this will help somebody else :)&lt;/p&gt;&#xA;" OwnerUserId="17263" LastEditorUserId="16827" LastEditDate="2019-02-03T02:48:04.260" LastActivityDate="2019-02-03T02:48:04.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18174" PostTypeId="2" ParentId="18150" CreationDate="2019-02-03T00:08:37.403" Score="1" Body="&lt;p&gt;In the output you have posted, two lines begin with an 'E' this denotes an error, while the 'W's are warnings. While warnings can be ignored (I'm not saying they should be, only that they can) an error can not, and will break the upgrade process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best course of action that comes to mind, is to remove the broken ppa's.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a link &lt;a href=&quot;https://www.2daygeek.com/how-to-remove-delete-ppas-on-ubuntu-debian-linux-mint-elementary-os/#&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, containing several ways to handle that.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-02-03T00:08:37.403" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18175" PostTypeId="1" CreationDate="2019-02-03T00:18:47.787" Score="1" ViewCount="309" Body="&lt;p&gt;I have a new, fresh installation of Elementary OS 5 - Juno on a Razer Blade Stealth (2018).  All of the updates have been applied (as of 02/02/19).  I want to enable the firewall through System Settings -&gt; Security &amp;amp; Privacy -&gt; Firewall.  I unlock the settings to allow changes to the system.  After the firewall (ufw) is enabled, I get the following prompt about every seven minutes:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Authentication is required to run the Firewall Configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Entering the password gives you about seven additional minutes before having to re-authenticate the firewall.  Then it becomes a constant rinse and repeat series of events...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ journalctl --follow&#xA;Feb 02 00:20:23 (hostname) io.elementary.p[1710]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Feb 02 00:20:23 (hostname) gala.desktop[1676]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2002d31 (Authentica)&#xA;&#xA;Feb 02 00:27:07 (hostname) io.elementary.p[1710]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Feb 02 00:27:07 (hostname) gala.desktop[1676]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2003980 (Authentica)&#xA;&#xA;Feb 02 00:33:29 (hostname) io.elementary.p[1710]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Feb 02 00:33:29 (hostname) gala.desktop[1676]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x200474a (Authentica)&#xA;&#xA;$ ps -eaf | grep (processID)&#xA;(userID)   1710  1381  0 00:00 ?        00:00:01 /usr/lib/x86_64-linux-gnu/policykit-1-pantheon/io.elementary.pantheon-agent-polkit&#xA;(userID)   1676  1381  4 00:00 ?        00:01:39 gala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ journalctl --follow&#xA;Feb 02 01:16:16 (hostname) io.elementary.p[1633]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Feb 02 01:16:16 (hostname) gala.desktop[1592]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2001cd5 (Authentica)&#xA;&#xA;Feb 02 01:22:29 (hostname) io.elementary.p[1633]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Feb 02 01:22:29 (hostname) gala.desktop[1592]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2003813 (Authentica)&#xA;&#xA;$ ps -eaf | grep (processID)&#xA;(userID)   1633  1315  0 01:05 ?        00:00:01 /usr/lib/x86_64-linux-gnu/policykit-1-pantheon/io.elementary.pantheon-agent-polkit&#xA;(userID)   1592  1315  6 01:05 ?        00:00:48 gala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As you can see from my log snippets, the error continues after a reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions, comments or assistance would be highly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="29" LastEditDate="2019-11-17T13:01:59.687" LastActivityDate="2024-01-26T17:00:45.173" Title="UFW and Elementary OS 5 - Juno" Tags="|release-juno|networking|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18176" PostTypeId="1" CreationDate="2019-02-03T15:45:09.950" Score="2" ViewCount="62" Body="&lt;p&gt;I'm looking to write a quick indicator applet for international timezones, since Elementary doesn't have any kind of world clock functionality. Being familiar with Python, I'd rather do it in that, but I'm only seeing the old &lt;code&gt;gi.repository&lt;/code&gt; -&gt; &lt;code&gt;AppIndicator3&lt;/code&gt; API, which doesn't support very rich widgets.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any recommendations? I'm not particularly interested in learning Vala.&lt;/p&gt;&#xA;" OwnerUserId="16872" LastActivityDate="2019-02-03T15:45:09.950" Title="Is it possible to implement a `Wingpanel.Indicator` instance in Python?" Tags="|wingpanel|python|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18177" PostTypeId="1" CreationDate="2019-02-03T15:59:54.470" Score="0" ViewCount="661" Body="&lt;p&gt;I installed elementary OS on my HP Notebook - 15-bw024na for the first time and I can't find a way to connect the wifi. It shows no icons or connections. &#xA;I am new to Linux and was using Windows 10 before. I would really appreciate some help as I have tried everything I could find online to make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried installing this: &#xA;&lt;a href=&quot;https://github.com/smlinux/rtl8723de&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/smlinux/rtl8723de&lt;/a&gt; but did not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried also the:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod athk5&#xA;sudo rfkill unlock all&#xA;sudo modprobe ath5k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And this one among others:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, nothing is working so far. I am new to Linux and I am not sure if I am doing things right. Please help :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6xX2S.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6xX2S.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17284" LastEditorUserId="16827" LastEditDate="2019-05-07T09:06:43.090" LastActivityDate="2019-10-04T16:01:55.237" Title="Help please! Installed elementary OS Juno 5 and have no Wifi options" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18178" PostTypeId="1" CreationDate="2019-02-03T19:51:58.900" Score="0" ViewCount="140" Body="&lt;p&gt;Recently I installed the latest release of Firefox stable, version 65. Since the upgrade, Firefox is unusable. When attempting to load a web page, both through bookmarks and typed in addresses, it will begin to load the page, then drop and leave me with a blank page. Click on the hamburger menu is unresponsive as well. Prior to the upgrade to v65, everything was working correctly. I've disabled all my addons through about:addons (which did display correctly) and the behavior is still the same. I realize this may be better posted on a support page for Firefox, but figured I'd see if any other elementary users are experiencing this, as the upgrade to 65 completed without issue for both of my ubuntu boxes. &lt;/p&gt;&#xA;" OwnerUserId="15536" LastActivityDate="2019-02-13T13:00:36.307" Title="Firefox unresponsive after upgrade to version 65" Tags="|updates|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18179" PostTypeId="2" ParentId="18178" CreationDate="2019-02-03T22:11:14.727" Score="1" Body="&lt;p&gt;Update:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found a fix of sorts. My firefox has been stable for the last few days and yesterday I changed the browser to display the tabs in the titlebar and all the problems came back. Pages wouldn't load, the rightclick menu didn't work etc. When I changed the titlebar setting back Firefox started to behave normally again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have this as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sometimes it can take a while for the bug to manifest, but when it triggers only a reboot will fix it, and then only to a certain extent. Even after a reboot when rightclicking on links the menu won't stay open, you have to keep the button pressed down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it happens all subsequent websites won't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately I already tried refreshing FF and the problem returned after a while.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried making a completely new profile and the same thing happened.&lt;/p&gt;&#xA;" OwnerUserId="17286" LastEditorUserId="17286" LastEditDate="2019-02-13T13:00:36.307" LastActivityDate="2019-02-13T13:00:36.307" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18180" PostTypeId="2" ParentId="18178" CreationDate="2019-02-03T22:38:55.573" Score="1" Body="&lt;p&gt;So, I may have figured it out. I 'refreshed' Firefox, and everything seems to be okay for now. If you want to give this a shot, head over to about:support and there will be a link there to refresh.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wanted to avoid doing this because of concerns of loss of data and whatnot, but if you have a Firefox Sync account, it really is painless. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oddly, with dozens of upgrades over the years, this is the first time I've ever had to refresh Firefox to resolve an issue following an update. &lt;/p&gt;&#xA;" OwnerUserId="15536" LastActivityDate="2019-02-03T22:38:55.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18182" PostTypeId="1" AcceptedAnswerId="18183" CreationDate="2019-02-04T02:37:08.443" Score="0" ViewCount="153" Body="&lt;p&gt;I'm using Slack on elementaryOS and would like its notifications to stay on-screen for a longer duration so that I can read messages without switching focus to the app. Is there any way I can do this? I've looked in the Notification settings window and the dconf editor but couldn't find any relevant settings.&lt;/p&gt;&#xA;" OwnerUserId="15156" LastActivityDate="2019-07-04T08:01:35.197" Title="Any way to configure notification duration?" Tags="|notifications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18183" PostTypeId="2" ParentId="18182" CreationDate="2019-02-04T06:05:59.300" Score="1" Body="&lt;p&gt;I believe Daniel's answer for a similar question in Loki may still be relevant to this in Juno. &lt;a href=&quot;https://elementaryos.stackexchange.com/a/9571/9220&quot;&gt;https://elementaryos.stackexchange.com/a/9571/9220&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user9220" LastActivityDate="2019-02-04T06:05:59.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18185" PostTypeId="1" CreationDate="2019-02-04T17:03:32.057" Score="0" ViewCount="308" Body="&lt;p&gt;I have already installed Elementary Os. But when i want to format the USB the files are protected and i cannot delete them.&#xA;Thanks for your answers.&lt;/p&gt;&#xA;" OwnerUserId="17293" LastActivityDate="2019-07-05T08:02:10.283" Title="How do i delete the elementary OS boot on my USB?" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18186" PostTypeId="2" ParentId="9801" CreationDate="2019-02-04T21:56:14.560" Score="1" Body="&lt;p&gt;Another workaround is using the script provided on this GitHub project:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/rpeshkov/plank-spacer&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rpeshkov/plank-spacer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8162" LastActivityDate="2019-02-04T21:56:14.560" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18188" PostTypeId="2" ParentId="18146" CreationDate="2019-02-05T06:20:28.013" Score="1" Body="&lt;p&gt;Try running the following commands to repair your system&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update –fix-missing&#xA;sudo dpkg –configure -a&#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="16827" LastEditDate="2019-05-08T10:22:59.210" LastActivityDate="2019-05-08T10:22:59.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18189" PostTypeId="2" ParentId="18185" CreationDate="2019-02-05T07:50:07.007" Score="1" Body="&lt;p&gt;SilverWolf is correct.  As long as Elementary OS is installed on your hard drive (or SSD) you can safely reformat your installation USB drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One way to do this is through GNOME Disks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a. Go to AppCenter, search for GNOME Disks.&lt;br&gt;&#xA;b. After GNOME Disks has installed go to&#xA;Applications -&gt; Disk&lt;br&gt;&#xA;c. You will see your drive list on the left column.&lt;br&gt;&#xA;d. Select your USB disk (make sure you choose the correct disk).&lt;br&gt;&#xA;e. In the middle column, click on the stop icon (square).&lt;br&gt;&#xA;This next step will &lt;strong&gt;clear all of the data&lt;/strong&gt; on the USB disk.  Be sure you want to proceed &lt;strong&gt;before&lt;/strong&gt; continuing.&lt;br&gt;&#xA;g. Click on the minus icon to the right of the stop icon.&lt;br&gt;&#xA;h. Press the Delete button to delete the partition.&lt;br&gt;&#xA;i. Press the plus icon, then click the Next button to continue.&lt;br&gt;&#xA;j. Enter the volume name and leave the type as FAT.&lt;br&gt;&#xA;k. Now click the Create button.&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; With a USB disk you do not need to erase the media.&lt;br&gt;&#xA;l. Finally, click the play icon to remount the device so it can be used by Elementary OS.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Your USB disk will now be blank and ready for use.&lt;br&gt;&#xA;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-05T07:50:07.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18190" PostTypeId="1" CreationDate="2019-02-05T10:59:35.537" Score="1" ViewCount="58" Body="&lt;p&gt;I have installed an app via snapd and have changed both .desktop files to point to the svg icon (snap and applications folder) but there's still no icon linking in the wingpanel. any suggestions? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gclMz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gclMz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14577" LastEditorUserId="14577" LastEditDate="2019-02-05T15:22:56.780" LastActivityDate="2019-02-05T15:22:56.780" Title="wing panel broken icon app installed via snapd" Tags="|wingpanel|icons|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18191" PostTypeId="2" ParentId="14616" CreationDate="2019-02-05T11:11:57.977" Score="1" Body="&lt;p&gt;Maybe in visual mode you can check in the Apps window, start typing &lt;strong&gt;Software&lt;/strong&gt; and it will show something like &lt;strong&gt;Software &amp;amp; Updates&lt;/strong&gt;. It is on the upper-left corner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, in the 5th tab, it shows &lt;strong&gt;&lt;em&gt;Additional Drivers&lt;/em&gt;&lt;/strong&gt; and from there I could select an &lt;strong&gt;unknown device&lt;/strong&gt; to &lt;em&gt;use dkms source for the r8812au network driver&lt;/em&gt;. (mine is 8812au, but well, choose whichever you need).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps from a clean install and without internet. If you can, just connect it with a cable or another USB adapter and spare yourself the hassle by doing this.&lt;/p&gt;&#xA;" OwnerUserId="17276" LastActivityDate="2019-02-05T11:11:57.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18192" PostTypeId="1" CreationDate="2019-02-05T14:02:46.530" Score="2" ViewCount="109" Body="&lt;p&gt;I just installed Eos on my MacBook air early 2015 and am very impressed so far. But when I close the lid or press the power button to suspend the laptop it doesn't wake up. It also takes a very long time to start again because it has to be restarted completely. I read in the stack exchange that it could be something with NVIDIA drivers, but as far as I'm aware the MBA has onboard Intel graphics&lt;/p&gt;&#xA;" OwnerUserId="17300" LastActivityDate="2019-02-05T14:02:46.530" Title="MacBook air 2015 doesn't wake from suspend" Tags="|graphic-drivers|drivers|suspend|macbook|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18193" PostTypeId="2" ParentId="15592" CreationDate="2019-02-05T15:52:39.797" Score="1" Body="&lt;p&gt;After some time I found how to solve that problem. Someone else had a similar one. Here is the link:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/213712/how-can-i-change-mouse-keymapping&quot;&gt;https://askubuntu.com/questions/213712/how-can-i-change-mouse-keymapping&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14740" LastActivityDate="2019-02-05T15:52:39.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18196" PostTypeId="1" CreationDate="2019-02-06T07:06:45.357" Score="1" ViewCount="193" Body="&lt;p&gt;I got a notification that that my root directory was running out of space which was odd because I had given it 20 GB of space and the installation was only a day old. After a bit of snooping, the offending file was &lt;code&gt;/var/logs/syslog&lt;/code&gt;. After looking at the &lt;code&gt;tail&lt;/code&gt; of the syslog, it seems to just be this error message repeated many times. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Feb  6 01:45:08 matebook io.elementary.cerbere.desktop[1715]: [0206/014508.524217:ERROR:address_tracker_linux.cc(316)] Failed to recv from netlink socket: Permission denied (13)&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what the cause of this log is and how to stop it from generating hundreds of logs per second? Tried googling the error but can't seem to find anyone else with the same error message&lt;/p&gt;&#xA;" OwnerUserId="17307" LastActivityDate="2019-02-06T07:06:45.357" Title="Very big file in /var/logs/syslog due to repeating error" Tags="|system|root|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18197" PostTypeId="1" CreationDate="2019-02-06T07:57:08.193" Score="0" ViewCount="1158" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zx6KJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zx6KJ.png&quot; alt=&quot;This is my desktop System Settings look like&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If in Loki you can find the Wacom menu at System Settings, you can't see any setting related to Wacom tablet in Juno. Can someone help me to solve this? I even don't know how to install the driver. And imma designer who uses Inkscape as daily use. Thank you.&lt;/p&gt;&#xA;" OwnerDisplayName="user17308" LastActivityDate="2020-01-27T00:19:30.467" Title="Is Juno Not Compatible with Wacom?" Tags="|settings|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18198" PostTypeId="2" ParentId="15450" CreationDate="2019-02-06T13:33:28.383" Score="2" Body="&lt;p&gt;Please go to AppCenter(&lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;) over an Ethernet connection and click on the installed tab. If you see &lt;strong&gt;bcmwl-kernel-source&lt;/strong&gt;, install it by clicking on &lt;kbd&gt;free&lt;/kbd&gt;. Your WiFi(&lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt;) should be working again.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-02-06T13:33:28.383" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18199" PostTypeId="1" CreationDate="2019-02-06T17:21:45.193" Score="0" ViewCount="673" Body="&lt;p&gt;When I put my Vaio E Series laptop into sleep mode and wake it up, I can move my mouse and click things, but can't type my password with my keyboard at the login screen. I can click the submit password button and it will say it is incorrect and click the type bar the little bar that says I can type will flash, but I am unable to do so. This happened on another distro (Zorin OS), both of which are Ubuntu LTS based, so this leads me to believe this is an Ubuntu problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="17309" LastActivityDate="2024-02-20T00:01:15.140" Title="Can't type in my password when waking laptop from sleep mode" Tags="|keyboard|greeter|desktop|security|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18200" PostTypeId="1" AcceptedAnswerId="18206" CreationDate="2019-02-07T04:45:41.563" Score="1" ViewCount="86" Body="&lt;p&gt;I added an entry to auto mount disk on startup by editing fstab. It looks like something went wrong with the entry and now I cannot boot it up &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to access the OS?&lt;/p&gt;&#xA;" OwnerUserId="9906" LastActivityDate="2019-02-07T16:21:11.220" Title="Invalid entry to fstab and now does not boot" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18201" PostTypeId="1" CreationDate="2019-02-07T08:05:47.227" Score="2" ViewCount="836" Body="&lt;p&gt;Many programs stop replying to the letter keys on the keyboard when switching to the Russian layout.&#xA;For example, a blender.&#xA;Both Inkscape and Gimp have problems.&#xA;In Ubuntu, POP! OS, Manjaro, Open Suse, no problem.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;This acute problem is still unresolved.&#xA;Please pay attention of the developers.&lt;/p&gt;&#xA;" OwnerUserId="12865" LastEditorUserId="16827" LastEditDate="2019-06-14T16:09:53.347" LastActivityDate="2019-06-14T16:09:53.347" Title="Hotkeys do not work when switching to Russian" Tags="|keyboard|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18203" PostTypeId="1" CreationDate="2019-02-07T11:52:10.080" Score="1" ViewCount="51" Body="&lt;p&gt;I wanted to publish an application I made, but the build process always fails after dpkg-buildchecks. In particular the permission for /usr/bin/fakeroot is denied.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reread the how-to multiple times, but I'm failing to see what I did wrong. Can anyone suggest what I have to change so the build can run?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For reference &lt;a href=&quot;https://github.com/treagod/spectator/issues/6&quot; rel=&quot;nofollow noreferrer&quot;&gt;the project issue&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="17315" LastActivityDate="2019-02-07T11:52:10.080" Title="Permission denied during review build" Tags="|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18206" PostTypeId="2" ParentId="18200" CreationDate="2019-02-07T16:21:11.220" Score="0" Body="&lt;p&gt;Create Live USB and use that to edit your fstab file. below is example of mine. but read carefully.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda5 during installation&#xA;UUID=&amp;lt;your-UUID-FOR-/-PARTITION&amp;gt; /               ext4    errors=remount-ro 0       1&#xA;# /boot/efi was on /dev/sda2 during installation&#xA;UUID=&amp;lt;your-UUID-FOR-/BOOT/EFI-PARTITION(IF YOU USE UEFI)&amp;gt;  /boot/efi       vfat    umask=0077      0       1&#xA;# swap was on /dev/sda7 during installation&#xA;UUID=&amp;lt;your-UUID-FOR-SWAP-PARTITION&amp;gt; none            swap    sw              0       0&#xA;&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;use command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;blkid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to get your disk UUID. &#xA;after finish editing your fstab, reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="17167" LastActivityDate="2019-02-07T16:21:11.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18208" PostTypeId="1" CreationDate="2019-02-07T21:48:46.490" Score="0" ViewCount="189" Body="&lt;p&gt;I've installed Juno release and all it's amazing, except that when I block my notebook, that have a secondary display, the display settings is lost.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My notebook is on the left side and my main screen is his, the secondary screen is on the right side. When the compute is locked, the login screen is showed on my secondary display, instead of the notebook screen (my main display). The position of screens is lost too, like my notebook is on the right and secondary monitor (now primary) is on the left&lt;/p&gt;&#xA;" OwnerUserId="17320" LastEditorUserId="17320" LastEditDate="2019-02-08T15:55:44.820" LastActivityDate="2024-02-13T01:03:50.413" Title="BUG: Display settings not applied until login" Tags="|display|settings|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18209" PostTypeId="2" ParentId="18081" CreationDate="2019-02-08T01:39:34.593" Score="1" Body="&lt;p&gt;This is a known bug in elementary OS 5.0. Whole system stutters a bit when changing layouts. There is no fix for this problem as for now, but I made a workaround:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Save this &lt;a href=&quot;https://gist.github.com/konchunas/ab805f7ce8d883ac5befc7edc9b333e7&quot; rel=&quot;nofollow noreferrer&quot;&gt;script&lt;/a&gt; somewhere locally&lt;/li&gt;&#xA;&lt;li&gt;If you have more than two layouts change the value of &lt;code&gt;LAYOUT_COUNT&lt;/code&gt; inside&lt;/li&gt;&#xA;&lt;li&gt;Assign executable bit to your script using &lt;code&gt;chmod +x&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Go to Settings -&gt; Keyboard&lt;/li&gt;&#xA;&lt;li&gt;Select &quot;Disabled&quot; in &quot;Switch layout&quot; field&lt;/li&gt;&#xA;&lt;li&gt;Now go to Shortcuts tab, select &quot;Custom&quot; category and press &quot;+&quot;&lt;/li&gt;&#xA;&lt;li&gt;Copy and paste full path to your script to the first column&lt;/li&gt;&#xA;&lt;li&gt;Assign your preferred shortcut in the second column&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Please Note that this method may not allow you to assign some specific shortcuts, but system-default Alt+Space works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are links to tracking &lt;a href=&quot;https://github.com/elementary/gala/issues/220&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/gala/issues/220#issuecomment-433351489&quot; rel=&quot;nofollow noreferrer&quot;&gt;comment&lt;/a&gt; of guy who discovered the workaround&lt;/p&gt;&#xA;" OwnerUserId="17118" LastActivityDate="2019-02-08T01:39:34.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18210" PostTypeId="1" CreationDate="2019-02-08T01:41:32.410" Score="0" ViewCount="144" Body="&lt;p&gt;After installing elementary OS (elementaryos-5.0-stable.20181016.iso / Juno) on a recently purchased notebook computer from HP, the device no longer has WiFi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No wireless devices are found under Network Settings, only VPNs and Proxies. There are many suggested solutions for this problem with varying degrees of reported success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem will significantly hinder any user switching from Windows, where most devices tend to work fairly seamlessly. This notebook is mostly useless without WiFi. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a canonical resource available that a user should follow to get functioning WiFi?&lt;/p&gt;&#xA;" OwnerUserId="17312" LastActivityDate="2024-03-16T21:01:55.213" Title="How can I use WiFi on my notebook computer?" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18211" PostTypeId="2" ParentId="18101" CreationDate="2019-02-08T06:20:17.560" Score="0" Body="&lt;p&gt;technicallyblue,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Welcome to the forum.  Ken Kinder's comment was spot on the mark.  I am running VBox  5.2.18_Ubuntu r123745 (with extension pack) on Juno -- no problems (so far).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, your stated POSIX permissions on your /usr directory you stated were (751).  From the directory listing you gave they appear to be (777).  That does &lt;strong&gt;not&lt;/strong&gt; match my fresh installation of Juno.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Performing a chmod on the entire /usr directory is &lt;strong&gt;not&lt;/strong&gt; recommended.  I highly urge you to reset it to 755 as soon as possible. That command would be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod -R 755 /usr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You have already set the /usr and /usr/lib folder owner to root (which is the correct user).  After the chmod command has finished, I recommend a &lt;em&gt;reboot&lt;/em&gt;.  After the reboot, completely uninstall virtualbox and all of its settings with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge virtualbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can reinstall Virtualbox the usual way (AppCenter or sudo apt install virtualbox).  Good luck!  If you continue to experience odd problems, it may be necessary to reinstall Juno.  However, don't jump through those hoops unless you are forced to do so...&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-08T06:20:17.560" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="18212" PostTypeId="2" ParentId="10246" CreationDate="2019-02-08T06:27:46.983" Score="1" Body="&lt;p&gt;&lt;code&gt;/usr/share/vscode/resources/app/out/vs/workbench/workbench.main.css&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just edit &lt;code&gt;font-family&lt;/code&gt; CSS to get different font in sidebar&lt;/p&gt;&#xA;" OwnerUserId="17324" LastActivityDate="2019-02-08T06:27:46.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18213" PostTypeId="2" ParentId="15268" CreationDate="2019-02-08T06:49:51.867" Score="1" Body="&lt;p&gt;Sav,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I too am a fellow Macintosh / elementary OS (Juno) user.  Other than using a Patriot Memory USB drive (which mounts consistently automatically) I may have one other suggestion for you.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GNOME Disks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This application can be installed through AppCenter.  It has the &quot;look and feel&quot; of Apple's Disk Utility program.  The only thing you will need to wrap your head around is the following:&lt;br&gt;&#xA;&lt;em&gt;Stop button&lt;/em&gt; will unmount the drive in question.&lt;br&gt;&#xA;&lt;em&gt;Play button&lt;/em&gt; will mount the drive in question.&lt;br&gt;&#xA;&lt;em&gt;Minus button&lt;/em&gt; will delete the partition (careful).&lt;br&gt;&#xA;&lt;em&gt;Gears button&lt;/em&gt; will format, resize, edit or benchmark the drive for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps!&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-08T06:49:51.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18214" PostTypeId="2" ParentId="18199" CreationDate="2019-02-08T07:21:26.933" Score="0" Body="&lt;p&gt;VexeDev,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Welcome to the forum.  Here is something you could try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;a. Open the terminal (Windows key + t)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b. Issue the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;c. change&lt;/p&gt;&#xA;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nouveau.modeset=0&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;d. Save and exit nano&lt;/p&gt;&#xA;&#xA;&lt;p&gt;e. sudo update-grub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;f. Restart the laptop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your Viao has the optional AMD Radeon HD 7550 graphics card (or similar option) you &lt;em&gt;may&lt;/em&gt; need to install the correct graphics drivers, use systemctl to disable the fallback and then try again to get the suspend and resume to work.  I know this gave me troubles with a Razer Blade Stealth (2018) on Loki/Juno until I added the change to grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that dosen't work, the workaround would be the following.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to System Settings -&gt; Security &amp;amp; Privacy -&gt; Locking&lt;br&gt;&#xA;&lt;strong&gt;Disable&lt;/strong&gt; the following toggle buttons: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Lock on sleep&#xA;Lock after screen turns off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, you could try to enable autologin as long as you do not mind the degraded level of security.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to System Settings -&gt; User Accounts&lt;br&gt;&#xA;&lt;strong&gt;Enable&lt;/strong&gt; the following toggle button:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Log in automatically&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="17282" LastEditDate="2019-02-15T16:23:31.537" LastActivityDate="2019-02-15T16:23:31.537" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18216" PostTypeId="1" AcceptedAnswerId="18797" CreationDate="2019-02-08T11:43:41.187" Score="3" ViewCount="481" Body="&lt;p&gt;what's the best tool chain for building elementary applications these days? I've been playing with an existing project that contains a lot of other magic (such as meson, ninja and the like), and while I'm not at all unfamiliar with writing and debugging code (15+ years of doing so in Java, Python and various scripting languages), I feel completely lost about where to start here, facing questions such as... :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How to start dive into the build/run/debug cycle?&lt;/li&gt;&#xA;&lt;li&gt;What's the best editor for syntax highlighting, code completion, browsing git commits and history, ...?&lt;/li&gt;&#xA;&lt;li&gt;How to integrate debugging with an editor or an IDE so I can navigate through running code, inspect variable values, ...?&lt;/li&gt;&#xA;&lt;li&gt;How to work with third-party libraries, API documentation, ... in there?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Both Java and Python do have quite robust solutions here; in most cases Eclipse or NetBeans does everything I need and more, in others Visual Studio Code. I've read some posts on that relating to elementary but most are pretty old and seem &lt;em&gt;very&lt;/em&gt; rudimentary. So to ask: How does your environment look like? How would a &quot;professional&quot; elementary app development desktop be set up for best outcomes? Maybe, too: Where to discuss this if it's off-topic in here? :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks bunches and all the best,&#xA;Kristian&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-04-23T10:22:06.637" Title="Setting up a development environment for elementaryOS apps?" Tags="|development|vala|ide|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18219" PostTypeId="2" ParentId="18208" CreationDate="2019-02-08T17:39:16.100" Score="0" Body="&lt;p&gt;StackExchange is not really the right place for reporting bugs, take a look at &lt;a href=&quot;https://github.com/elementary/greeter/issues/65&quot; rel=&quot;nofollow noreferrer&quot;&gt;this issue on Github&lt;/a&gt;. Anyway, the following seems to be a workaround:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a file called &lt;code&gt;set-primary-monitor-pantheon-greeter&lt;/code&gt; in &lt;code&gt;/usr/local/bin/&lt;/code&gt; (&lt;a href=&quot;https://gist.github.com/RyanMillerC/c48d9f63f8fe386b22a7da18cf6913d2&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;):&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;#&#xA;# Created: 2017-07-02 16:20&#xA;# Updated: 2018-02-09 12:23&#xA;# Creator: Ryan Miller&#xA;# Website: http://devopsmachine.com/&#xA;# File:    /usr/local/bin/set-primary-monitor-pantheon-greeter&#xA;#&#xA;&#xA;PRIMARY_DISPLAY='[PRIMARYDISPLAY]'&#xA;&#xA;# Get list of connected monitors&#xA;x_out=$(xrandr -q | grep -e '\( \)connected' | awk -F' ' '{ print $1 }')&#xA;&#xA;# Safety - Check if PRIMARY_DISPLAY is connected; if not, bail out of script&#xA;[[ $(grep ${PRIMARY_DISPLAY} &amp;lt;&amp;lt;&amp;lt; ${x_out}) ]] || exit 0&#xA;&#xA;# Iterate over x_out and disable all monitors except for PRIMARY_DISPLAY&#xA;for monitor in ${x_out[@]} ; do&#xA;    if [[ ${monitor} = ${PRIMARY_DISPLAY} ]] ; then&#xA;        xrandr --output ${monitor} --primary&#xA;    else&#xA;        xrandr --output ${monitor} --off&#xA;    fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Change &lt;code&gt;[PRIMARYDISPLAY]&lt;/code&gt; to the name of your primary display. You can get a list of all displays with &lt;code&gt;xrandr&lt;/code&gt; (for example &lt;code&gt;DisplayPort-2&lt;/code&gt; in my case)&lt;/li&gt;&#xA;&lt;li&gt;Make the file executable: &lt;code&gt;sudo chmod +a /usr/local/bin/set-primary-monitor-pantheon-greeter&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add the following at the end of &lt;code&gt;/usr/share/lightdm/lightdm.conf.d/40-io.elementary.greeter.conf&lt;/code&gt;:&#xA;&lt;code&gt;greeter-setup-script=/usr/local/bin/set-primary-monitor-pantheon-greeter&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;This will run the script when the greeter is set up. The script will then set the specified output as the primary output.&lt;/p&gt;&#xA;" OwnerUserId="17277" LastActivityDate="2019-02-08T17:39:16.100" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18220" PostTypeId="2" ParentId="17970" CreationDate="2019-02-08T18:25:57.963" Score="0" Body="&lt;p&gt;My problems regarding the night light is due to the use of dual graphical cards (optimus technology with nvidia) on my notebook, all I needed to do is to install the latest nvidia driver and it worked on the next reboot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are lots of details about that, you can either install bumblebee or &lt;code&gt;nvidia-prime&lt;/code&gt;, the latter I currently use. To make usage of that you have to type in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-prime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Take a note, however, that this might be dangerous and you have the chance to get a black screen on the next reboot; in order to fix the problem you just log in another tty (Ctrl+alt+FX where x belongs to [1, 9] and remove everything related to nvidia.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2019-02-08T18:25:57.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18221" PostTypeId="2" ParentId="17838" CreationDate="2019-02-08T19:50:52.713" Score="0" Body="&lt;p&gt;I just bought a new Laptop (Lenovo IdeaPad 330S) and was having exactly the same problem as you. After many frustrating hours of research, I discovered that it's a compatibility issue between Linux and the laptop's default storage controller.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically from what I understand, Linux needs it to be in AHCI mode in order to properly access the partitions, and by default the laptop was configured for RAID (using Intel Rapid Storage).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change it to AHCI easily by accessing the BIOS, but since Windows 10 was installed with RAID enabled, doing so would make it unbootable. There are a few ways you can try to change it without breaking the windows installation (&lt;a href=&quot;https://hetmanrecovery.com/recovery_news/how-to-enable-ahci-mode-for-sata-in-the-bios-without-reinstalling-windows.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;check this blogpost&lt;/a&gt;) but since it was a new laptop, I made a bootable Windows usb stick from the official ISO, formatted the drive and made a clean install after changing the storage controller settings to AHCI. Afterwards I was able to install ElementaryOS Juno without any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can read more about the dual boot problem with RAID &lt;a href=&quot;https://askubuntu.com/questions/867488/dell-xps-13-9360-dualboot-windows-10-and-ubuntu-16-04#&quot;&gt;here&lt;/a&gt; (check the most upvoted answer for a step by step description).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;TL;DR&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Get a bootable Windows USB stick and back up any data you may want to keep&lt;/li&gt;&#xA;&lt;li&gt;Check BIOS for Storage Controller&lt;/li&gt;&#xA;&lt;li&gt;Change it to AHCI&lt;/li&gt;&#xA;&lt;li&gt;Boot from the Windows USB stick&lt;/li&gt;&#xA;&lt;li&gt;Format drive with current windows installation and do a clean install&lt;/li&gt;&#xA;&lt;li&gt;Try again to run the ElementaryOS installer &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17327" LastActivityDate="2019-02-08T19:50:52.713" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18223" PostTypeId="2" ParentId="17832" CreationDate="2019-02-09T05:33:13.490" Score="2" Body="&lt;p&gt;I found the workaround here:&#xA;&lt;a href=&quot;https://github.com/elementary/music/issues/391&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/music/issues/391&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It crashes on startup if an NTFS partition is mounted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I unmounted all network shares and it doesn't crash on startup for me anymore.&lt;/p&gt;&#xA;" OwnerUserId="17330" LastActivityDate="2019-02-09T05:33:13.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18224" PostTypeId="2" ParentId="15641" CreationDate="2019-02-09T05:36:47.937" Score="2" Body="&lt;p&gt;I found the workaround here:&#xA;&lt;a href=&quot;https://github.com/elementary/music/issues/391&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/music/issues/391&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It crashes on startup if an NTFS partition is mounted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I unmounted all network shares and it doesn't crash on startup for me anymore.&lt;/p&gt;&#xA;" OwnerUserId="17330" LastActivityDate="2019-02-09T05:36:47.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18226" PostTypeId="2" ParentId="18210" CreationDate="2019-02-09T07:38:36.917" Score="0" Body="&lt;p&gt;Please go to &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; over a Ethernet connection and click the &lt;code&gt;Installed&lt;/code&gt; tab. If you see &lt;code&gt;bcmwl-kernel-source&lt;/code&gt;, click on &lt;code&gt;free&lt;/code&gt; to install it. Reboot your system and you will have wireless facility.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-02-09T07:38:36.917" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18227" PostTypeId="2" ParentId="18171" CreationDate="2019-02-09T20:53:21.977" Score="0" Body="&lt;p&gt;After trying multiple attempts to fix, I decided to check settings in the BIOS. It turns out there was a setting related to Wireless that needed turning off. Wireless came back. It still is strange that all worked OK in the Live version without changing the BIOS. Oh, well, it now works.&lt;/p&gt;&#xA;" OwnerUserId="12405" LastActivityDate="2019-02-09T20:53:21.977" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18229" PostTypeId="1" CreationDate="2019-02-10T04:23:49.560" Score="1" ViewCount="273" Body="&lt;p&gt;elementary OS 5.0 Juno works perfect on my 15&quot; inch late 2008 MacBook Pro when I run the OS on USB stick.  In particular, the &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; works flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So why does wifi &lt;strong&gt;not work&lt;/strong&gt; after elementary OS 5.0 Juno is installed on the hard drive?  The wifi will not work and won't attempt to try and use it.  That makes no sense to me and is a pretty bad bug as I installed the OS based on favorable USB bootable stick experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Definitely need a new elementary OS to download as if my wifi doesn't work, I cannot download any bug fixes to fix it.&lt;/p&gt;&#xA;" OwnerUserId="17336" LastEditorUserId="16827" LastEditDate="2019-02-10T04:28:25.933" LastActivityDate="2024-02-28T09:03:25.600" Title="Why does wifi not work after elementary OS 5.0 Juno installs on my late 2008 MacBook Pro?" Tags="|wifi|macbook|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18230" PostTypeId="1" CreationDate="2019-02-10T12:10:28.313" Score="2" ViewCount="45" Body="&lt;p&gt;I upgraded recently to Juno and have run into an issue. When I put my desktop to sleep it all goes fine but when I go and wake it up and type my password the computer screen goes black and the computer goes back again to sleep. I have to wake it up a second time to make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How could I fix this issue? It never happened to me in Freya.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="17341" LastActivityDate="2019-02-10T12:10:28.313" Title="Computer goes to sleep immediately after wake up login on Juno" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18231" PostTypeId="2" ParentId="16055" CreationDate="2019-02-10T14:45:12.800" Score="2" Body="&lt;p&gt;1 - Create a file named startup-manager-fix.service with the following text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Show EFI Install in Apple Startup Manager&#xA;After=rc-local.service&#xA;&#xA;[Service]&#xA;Type=oneshot&#xA;RemainAfterExit=true&#xA;ExecStop=-/bin/mkdir /boot/efi/EFI/BOOT/&#xA;ExecStop=/bin/cp -a -f /boot/efi/EFI/ubuntu/grubx64.efi /boot/efi/EFI/BOOT/BOOTx64.EFI&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2 - Copy the above file to the folder /etc/systemd/system/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 - Open the terminal and insert this command to activate the service that will sync both files.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl daemon-reload &amp;amp;&amp;amp; sudo systemctl enable startup-manager-fix.service &amp;amp;&amp;amp; sudo systemctl start startup-manager-fix.service &amp;amp;&amp;amp; sudo systemctl daemon-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;4 - reboot and the next time you access the apple boot selector (press the &lt;kbd&gt;option&lt;/kbd&gt; key on startup) the elementary OS ( or other Ubuntu based distro) EFI Installation should be present.&lt;/p&gt;&#xA;" OwnerUserId="5150" LastEditorUserId="5150" LastEditDate="2019-02-10T15:09:43.140" LastActivityDate="2019-02-10T15:09:43.140" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18234" PostTypeId="1" CreationDate="2019-02-11T09:50:41.567" Score="0" ViewCount="631" Body="&lt;p&gt;I have some sirious problems with my elementary os juno after waking up (unlocking). When I first boot computer everything works just fine, system is fluid and very responsive. But, at the first time I lock/unlock system it starts to slow down and gets very unresponsive and choppy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PC is very powerful&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Cpu: i7-8700k&lt;/li&gt;&#xA;&lt;li&gt;Gpu: nvidia 1080TI (NVIDIA Driver Version: 415.27)&lt;/li&gt;&#xA;&lt;li&gt;Ram: 32gb ddr, Hard drive&lt;/li&gt;&#xA;&lt;li&gt;kingston ssd&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The only way to solve the problem is to restart window manager with gala --replace &amp;amp; from virtual terminal and after restart everything works just fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do you think, what can cause such a problem and what is the solution ?&lt;/p&gt;&#xA;" OwnerUserId="17348" LastEditorUserId="17348" LastEditDate="2019-02-11T12:55:14.280" LastActivityDate="2024-02-20T04:08:46.040" Title="Problem with elementary os juno after wake up" Tags="|release-juno|nvidia|suspend|performance|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18236" PostTypeId="1" CreationDate="2019-02-11T19:39:02.113" Score="1" ViewCount="1208" Body="&lt;p&gt;&lt;strong&gt;Input code&lt;/strong&gt; : &lt;code&gt;sudo apt update&lt;/code&gt;&#xA;&lt;strong&gt;Output with error&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Get:1 http://bd.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]&#xA;Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease                                               &#xA;Ign:3 http://dl.google.com/linux/chrome/deb stable InRelease                                                    &#xA;Get:4 http://bd.archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]                                  &#xA;Get:5 http://dl.google.com/linux/chrome/deb stable Release [943 B]                                              &#xA;Get:6 http://packages.elementary.io/appcenter bionic InRelease [5,894 B]                                        &#xA;Hit:7 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                     &#xA;Get:8 http://archive.ubuntu.com/ubuntu bionic InRelease [242 kB]       &#xA;Hit:10 http://ppa.launchpad.net/linrunner/tlp/ubuntu bionic InRelease              &#xA;Get:11 http://packages.elementary.io/appcenter bionic/main amd64 Packages [46.3 kB]&#xA;Get:12 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [126 kB]                &#xA;Get:13 http://packages.elementary.io/appcenter bionic/main DEP-11 64x64 Icons [299 kB]                          &#xA;Get:13 http://packages.elementary.io/appcenter bionic/main DEP-11 64x64 Icons [299 kB]                          &#xA;Hit:16 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                &#xA;Hit:17 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease                          &#xA;Get:13 http://packages.elementary.io/appcenter bionic/main DEP-11 64x64 Icons [299 kB]                          &#xA;Err:13 http://packages.elementary.io/appcenter bionic/main DEP-11 64x64 Icons&#xA;  File has unexpected size (248094 != 298652). Mirror sync in progress? [IP: 104.28.5.44 80]&#xA;  Hashes of expected file:&#xA;   - Filesize:298652 [weak]&#xA;   - SHA256:28279b80d3def9b4e0ee1679bb35f1ad370ba08a0d06e7afffbb7ec89171a61e&#xA;   - SHA1:5674b2b15af03f4a9efe8c604588d7a29f18ff46 [weak]&#xA;   - MD5Sum:ffe5f781ca6245ddfe9f862afc7f47f7 [weak]&#xA;  Release file created at: Tue, 12 Feb 2019 05:06:12 +0000&#xA;Fetched 406 kB in 3s (137 kB/s)                                  &#xA;Reading package lists... Done&#xA;E: Failed to fetch http://packages.elementary.io/appcenter/dists/bionic/main/dep11/icons-64x64.tar.gz  File has unexpected size (248094 != 298652). Mirror sync in progress? [IP: 104.28.5.44 80]&#xA;   Hashes of expected file:&#xA;    - Filesize:298652 [weak]&#xA;    - SHA256:28279b80d3def9b4e0ee1679bb35f1ad370ba08a0d06e7afffbb7ec89171a61e&#xA;    - SHA1:5674b2b15af03f4a9efe8c604588d7a29f18ff46 [weak]&#xA;    - MD5Sum:ffe5f781ca6245ddfe9f862afc7f47f7 [weak]&#xA;   Release file created at: Tue, 12 Feb 2019 05:06:12 +0000&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Input code for list&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep -r --include '*.list' '^deb ' /etc/apt/ | sed -re 's/^\/etc\/apt\/sources\.list((\.d\/)?|(:)?)//' -e 's/(.*\.list):/\[\1\] /' -e 's/deb http:\/\/ppa.launchpad.net\/(.*?)\/ubuntu .*/ppa:\1/'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Output list&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[google-chrome.list] deb [arch=amd64] http://dl.google.com/linux/chrome/deb/ stable main&#xA;[elementary.list] ppa:elementary-os/stable&#xA;[philip_scott-ubuntu-elementary-tweaks-bionic.list] ppa:philip.scott/elementary-tweaks&#xA;[appcenter.list] deb http://packages.elementary.io/appcenter bionic main&#xA;[patches.list] ppa:elementary-os/os-patches&#xA;[linrunner-ubuntu-tlp-bionic.list] ppa:linrunner/tlp&#xA;deb http://archive.ubuntu.com/ubuntu bionic main restricted&#xA;deb http://bd.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;deb http://archive.ubuntu.com/ubuntu bionic universe&#xA;deb http://bd.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;deb http://archive.ubuntu.com/ubuntu bionic multiverse&#xA;deb http://bd.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;deb http://bd.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Image of Appcenter Error&lt;/strong&gt; :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uG4SU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uG4SU.jpg&quot; alt=&quot;See the error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;There is no apps which made for elementary os:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Oe2fO.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Oe2fO.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Thank you&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17354" LastEditorUserId="26" LastEditDate="2019-02-20T02:00:46.413" LastActivityDate="2019-09-01T12:28:05.767" Title="Update error unexpected size" Tags="|updates|appcenter|apt|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18237" PostTypeId="2" ParentId="16647" CreationDate="2019-02-11T19:39:28.383" Score="1" Body="&lt;p&gt;I have found that enabling logging when you open up Atom stops this from happening most of the time.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;atom -l ~/atom-log.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can set an alias in your &lt;code&gt;~/.bashrc&lt;/code&gt; file to make launching Atom from the terminal with the config easier.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;printf '\nalias atom=&quot;atom -l ~/.atom/log.txt&quot;' &amp;gt;&amp;gt; ~/.bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7104" LastActivityDate="2019-02-11T19:39:28.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18238" PostTypeId="2" ParentId="3504" CreationDate="2019-02-11T20:23:56.413" Score="2" Body="&lt;p&gt;I had a similar issue, but instead a black screen, it hanged for a while and displayed almost all the frame as a corrupted image, all except the text box and buttons. So I believe this is a GPU problem and Ubuntu may be using a different driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me, the solution was:&#xA;1 - In the Applications menu, search for Software &amp;amp; Updates&#xA;2 - go to the Drivers tab&#xA;3 - I exchanged the proprietary driver (Nvidia 390) for the open source one (X server)&#xA;4 - Restarted and everything was faster without hiccups.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check for this or look further for your GPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this interferes with or causes the second problem, you'll have to further test it.&lt;/p&gt;&#xA;" OwnerUserId="17276" LastActivityDate="2019-02-11T20:23:56.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18239" PostTypeId="1" CreationDate="2019-02-11T23:06:22.007" Score="0" ViewCount="99" Body="&lt;p&gt;I installed elementary OS v5 on a Dell Latitude E6410. The program indicates that it recognizes the wireless network and is connected, but when I attempt to access any site it displays the message &quot;unable to display this website&quot; Also, when I search for networks in my area my network is listed twice as &quot;network name.&quot; and &quot;network name 1&quot;.&lt;/p&gt;&#xA;" OwnerUserId="17357" LastEditorUserId="18048" LastEditDate="2019-05-07T09:08:49.660" LastActivityDate="2019-10-04T12:03:05.490" Title="WiFi/Internet access elementary OS" Tags="|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18240" PostTypeId="1" AcceptedAnswerId="18249" CreationDate="2019-02-12T09:39:35.573" Score="1" ViewCount="324" Body="&lt;p&gt;Is it possible to have a file preview for &quot;known formats&quot; (e.g. image, PDF, ODT) in the right-most column in columnar view?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kXWfC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kXWfC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do already have thumbnails enabled, but am looking for a bigger preview on a per file basis.&lt;/p&gt;&#xA;" OwnerUserId="7343" LastActivityDate="2019-02-26T15:00:23.137" Title="File preview in right-most column?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18242" PostTypeId="1" AcceptedAnswerId="18243" CreationDate="2019-02-12T16:44:39.870" Score="0" ViewCount="884" Body="&lt;p&gt;Does anyone have a foolproof way to display desktop icons in elementary OS 5? I am not a big fan of tweaking via the Terminal (reason why I am on elementary); so any other way would be preferable. I have Gnome Tweaks installed as well as dconf. &#xA;Cheers,&#xA;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="16827" LastEditDate="2019-04-13T13:46:15.423" LastActivityDate="2019-04-13T13:46:15.423" Title="Desktop icons in elementary OS 5" Tags="|desktop|icons|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18243" PostTypeId="2" ParentId="18242" CreationDate="2019-02-12T18:38:23.907" Score="1" Body="&lt;p&gt;Search the appstore for &quot;desktop folder&quot; and install it. It's pretty basic though (it doesn't support dragging a file from an application to the desktop and vice versa for example EDIT: this can sort of be done by pressing the ctrl key before dragging the file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another option (that has drag and drop) is to run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xfdesktop4 thunar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open a terminal and run &lt;code&gt;xfdesktop&lt;/code&gt; to get desktop icons. You can set the command to run at boot if you like too (and so you won't have to have the terminal open).&lt;/p&gt;&#xA;" OwnerUserId="17355" LastEditorUserId="17355" LastEditDate="2019-02-15T21:06:46.773" LastActivityDate="2019-02-15T21:06:46.773" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18245" PostTypeId="1" CreationDate="2019-02-12T23:49:51.530" Score="1" ViewCount="396" Body="&lt;p&gt;I am getting some extravagant 'infrared-camera-looking' artifacts both on a Youtube livestream and also when I try to play an H.264 coded video in elementary Videos. I tried installing many codec packages including ubuntu-restricted-extras, ffmpeg codecs, and others, with the same result. This is a fresh install of the stable ISO barring the flurry of packages I tried.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no issue with opening the container, playing the sound, with no errors, but the video feed is no good. Firefox and mpv work fine, but I want to use the stock OS if I can.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -a  &#xA;Linux evropa 4.15.0-45-generic #48-Ubuntu SMP Tue Jan 29 16:28:13 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo lshw -c video&#xA;  *-display                 &#xA;       description: VGA compatible controller&#xA;       product: Mullins [Radeon R4/R5 Graphics]&#xA;       vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;       physical id: 1&#xA;       bus info: pci@0000:00:01.0&#xA;       version: 45&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm pciexpress msi vga_controller bus_master cap_list rom&#xA;       configuration: driver=radeon latency=0&#xA;       resources: irq:38 memory:c0000000-cfffffff memory:d0000000-d07fffff ioport:f000(size=256) memory:feb00000-feb3ffff memory:c0000-dffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HeDo7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HeDo7.png&quot; alt=&quot;Reddish video artifacts in Youtube&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17358" LastEditorUserId="16827" LastEditDate="2019-02-19T12:45:50.513" LastActivityDate="2024-03-28T04:09:21.150" Title="Heavy graphics artifacts on elementary Videos, and Youtube on Epiphany browser" Tags="|display|release-juno|graphic-drivers|graphics|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18246" PostTypeId="1" CreationDate="2019-02-13T05:41:13.457" Score="1" ViewCount="1170" Body="&lt;p&gt;Shortly after executing &quot;sudo apt-get update&quot; in Terminal I ran the remaining updates in the App Center. Once I started with these updates, I changed user accounts (stayed logged in to both). It was functional at first, I got to a new webpage before my entire OS stopped working. I could move my mouse but there would be no response from the computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After about 10 minutes waiting I forced computer shutdown manually and when I restarted the computer it stops mid-boot, listing the call trace and summary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error message that I'm getting mid-boot is: &quot;Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0, 0)&quot;&lt;/p&gt;&#xA;" OwnerUserId="17367" LastActivityDate="2024-03-05T06:01:10.153" Title="Elementary OS not Booting After Update [&quot;Kernel panic - not syncing&quot;]" Tags="|updates|boot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18247" PostTypeId="2" ParentId="18245" CreationDate="2019-02-13T07:14:46.780" Score="0" Body="&lt;p&gt;It's an issue with AMD cards, from what I know it's not fixable by the user. You can install &quot;gnome mpv&quot; to view videos since it doesn't have this problem unlike the default video app and looks just as good. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for epiphany, it's the same thing unfortunately.&lt;/p&gt;&#xA;" OwnerUserId="17355" LastActivityDate="2019-02-13T07:14:46.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18248" PostTypeId="2" ParentId="17480" CreationDate="2019-02-13T09:01:29.790" Score="2" Body="&lt;ul&gt;&#xA;&lt;li&gt;The first issue IMO depends on the application that generates the notification itself, so I'm not sure if there is anything to do about it.&lt;/li&gt;&#xA;&lt;li&gt;The second issue: I'm assuming you are using Evolution, but if you are using something different, just use the corresponding .desktop file for that email&#xA;client:&#xA;You could copy the desktop file from&#xA;/usr/share/applications/evolution.desktop to ~/.local/share/applications&#xA;and then, edit it and in the &quot;Exec&quot; line, just prepend the Adwaita GTK theme for that application. It will not have the &quot;elementary look and feel&quot; but at least you'll be able to read everything:&#xA;Exec=env GTK_THEME=Adwaita evolution %U&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17369" LastActivityDate="2019-02-13T09:01:29.790" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18249" PostTypeId="2" ParentId="18240" CreationDate="2019-02-13T09:42:04.567" Score="2" Body="&lt;p&gt;This suggestion is periodically raised but is (so far) regarded as contrary to elementaryos design policy I am afraid.  See for example &lt;a href=&quot;https://github.com/elementary/files/issues/438&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/438&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary native apps are intended to open quickly enough to make a preview unnecessary as the delay in generating the preview would be comparable with the delay in opening the app. Native apps are intended be as simple as possible.  In most cases the combination of file name and thumbnail (which can be as large as 256px at maximum zoom) is enough to identify the contents of the file.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-02-13T09:42:04.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18250" PostTypeId="1" CreationDate="2019-02-13T10:24:38.233" Score="0" ViewCount="132" Body="&lt;p&gt;So I recently installed elementary Os and I've been experiencing this problem:&#xA;After I log back in from sleep state, the terminal its all transparent, except the header bar.&#xA;Moving the mouse over the lines makes them visible again, but as soon as another window is over the terminal, or its minimized the same problem occurs.&lt;br&gt;&#xA;Opening a new terminal doesn't fix it since it behaves in the same manner. Only a restart seems to fix this.&#xA;I'm using intel integrated graphics, if its any help.&#xA;Thanks,&lt;/p&gt;&#xA;" OwnerUserId="17361" LastActivityDate="2019-02-14T08:42:40.030" Title="Terminal becomes transparent after sleep. 5.0 Juno" Tags="|display|pantheon-terminal|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18251" PostTypeId="2" ParentId="18242" CreationDate="2019-02-13T10:45:50.430" Score="0" Body="&lt;p&gt;Yes I found Desktop Folder a bit too basic, for example it does not display the bin.&#xA;Thanks anyway!&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2019-02-13T10:45:50.430" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18253" PostTypeId="2" ParentId="18246" CreationDate="2019-02-13T13:23:12.683" Score="0" Body="&lt;p&gt;Choose another kernel from the GRUB menu under Advanced options for Ubuntu and run sudo update-initramfs -u -k version to generate the initrd for version (replace version with the kernel version string such as 4.15.0-36-generic) then sudo update-grub.&lt;/p&gt;&#xA;" OwnerUserId="17354" LastActivityDate="2019-02-13T13:23:12.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18255" PostTypeId="1" CreationDate="2019-02-13T15:10:31.430" Score="0" ViewCount="337" Body="&lt;p&gt;Does anyone have a backup solution that will provide a bootable backup of elementary juno on the regular?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Coming from mac, I remember the days before time machine, and they were not pretty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In short, my &lt;em&gt;preferred strategy would allow&lt;/em&gt; me to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Every morning boot yesterday's bootable backup and begin working.&lt;/strong&gt;  This way, I immediately know, for certain, whether yesterday's backup is viable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise, one ends up needing to restore one day and realizes that, for some reason, the latest backup is not booting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Deja Backup&lt;/li&gt;&#xA;&lt;li&gt;Timeshift&lt;/li&gt;&#xA;&lt;li&gt;Back in Time&lt;/li&gt;&#xA;&lt;li&gt;Clonezilla&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Clonezilla is the only one that will provide a bootable clone, but that said I was not able to boot the clone I made. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I feel like Clonezilla is the way, but could use some company trying determine the best method of using it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My guess is that someone reading is the lead admin at a lab running elementary on a bunch of machines and has this method on lock- and may be even netboot to boot... to boot.&lt;/p&gt;&#xA;" OwnerUserId="16967" LastEditorUserId="16967" LastEditDate="2019-02-13T18:01:01.213" LastActivityDate="2019-11-12T02:31:42.217" Title="Bootable backup solution for elementary juno" Tags="|boot|backup|netboot|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18256" PostTypeId="1" AcceptedAnswerId="18268" CreationDate="2019-02-13T16:39:56.887" Score="1" ViewCount="2296" Body="&lt;p&gt;When I use Windows 10 I have no problems with the wifi signal and it's quite strong even in my living room. The elementary os isn't picking up the signal or something and it subsequently is very slow or just not working at times. I think it may be a driver issue and I was just wondering where I could find a driver for a realtek wifi adapter.&lt;/p&gt;&#xA;" OwnerUserId="17371" LastActivityDate="2019-02-15T02:56:37.887" Title="Wi-Fi on elementary is such a weak signal" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18257" PostTypeId="2" ParentId="16647" CreationDate="2019-02-13T23:53:43.030" Score="1" Body="&lt;p&gt;System Settings &gt; Keyboard &gt; Shortcuts &gt; Windows &gt; Unmaximize&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mine defaults to Alt F5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a ton for posting.  I reinstalled Atom 3 times before finding this.  &lt;/p&gt;&#xA;" OwnerUserId="16967" LastActivityDate="2019-02-13T23:53:43.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18258" PostTypeId="1" AcceptedAnswerId="18276" CreationDate="2019-02-14T00:19:04.957" Score="1" ViewCount="995" Body="&lt;p&gt;Well i was using Mint on dual boot with Witndos 10, so i wanted to remove Mint and install eOS with Windows.&#xA;I've been trying to install for a long time using a DVD, but every time that i finish instalation a error message appears:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to install grub in /dev/sda.&#xA;This is a fatal error.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then i reboot my laptop and a grub rescue screen shows up.&#xA;I tryed a lot of options but none of them worked.&#xA;When the system is being loading a message shows and dissapear:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Couldn't get size: 0x800000000000000e&#xA;  MODSIGN: Couldn't get UEFI db list&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do. I've already done &lt;a href=&quot;https://askubuntu.com/questions/886367/grub-install-dev-sda-failed-for-dual-boot-with-windows-10&quot;&gt;this&lt;/a&gt; tutorial, but when get the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub-install --recheck --no-floppy --force&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The terminal says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub install error doesn't look like a efi partition&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At the moment i already gave up of trying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a Lenovo G400s, BIOS doesn't have secure boot just UEFI, but now i am using Legacy mode. This &lt;a href=&quot;https://www.techtudo.com.br/dicas-e-tutoriais/noticia/2017/04/como-acessar-bios-de-um-notebook-da-lenovo.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; shows how my setup Bios is like. &lt;/p&gt;&#xA;" OwnerUserId="17373" LastActivityDate="2019-02-15T17:12:18.300" Title="Problem Installing elementary OS 5.0 Juno" Tags="|system-installation|dual-boot|grub|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18259" PostTypeId="1" CreationDate="2019-02-14T07:26:43.097" Score="0" ViewCount="69" Body="&lt;p&gt;I added a standard user, however, I'm unable to login. after inserting password, it takes me back to login screen.&lt;/p&gt;&#xA;" OwnerUserId="17375" LastEditorUserId="16827" LastEditDate="2019-05-13T06:56:38.547" LastActivityDate="2019-05-13T06:56:38.547" Title="Unable to login as standard user" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18260" PostTypeId="2" ParentId="18250" CreationDate="2019-02-14T08:42:40.030" Score="1" Body="&lt;p&gt;So I've been looking and it seems that this is related to the Intel integrated graphics device. It's not only affecting terminal but text shown on some other GTK applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the Arch wiki I found the following:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Font and screen corruption in GTK+ applications (missing glyphs after suspend/resume)&#xA;  Should you experience missing font glyphs in GTK+ applications, the following workaround might help. Edit /etc/environment to add the following line:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Edit '/etc/environment' and add the following line:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;COGL_ATLAS_DEFAULT_BLIT_MODE=framebuffer&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It seems to be working.&lt;/p&gt;&#xA;" OwnerUserId="17361" LastActivityDate="2019-02-14T08:42:40.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18263" PostTypeId="1" CreationDate="2019-02-14T16:02:27.513" Score="1" ViewCount="121" Body="&lt;p&gt;Over the past couple of days I've noticed a pretty annoying bug with window snapping. I have a screen recording of the bug linked below so people can see what I'm talking about.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically when I snap a window to the side and release my mouse, the window will &quot;stick&quot; to where it was originally. At that point I'm unable to minimize the window, as seen in the video. Sometimes after I close the application the window can still be seen where it was originally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All of these things can be seen in the screen recording. I haven't had it happen with native elementary apps, but applications like Chrome and Visual Studio Code have it happen frequently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://streamable.com/uoybf&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://streamable.com/uoybf&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17378" LastActivityDate="2019-02-18T10:59:29.227" Title="Window snapping bug" Tags="|pantheon|window-management|" AnswerCount="0" CommentCount="1" ClosedDate="2019-05-13T06:51:04.900" ContentLicense="CC BY-SA 4.0" />
  <row Id="18265" PostTypeId="2" ParentId="18255" CreationDate="2019-02-15T00:32:28.800" Score="1" Body="&lt;p&gt;Winston,&#xA;I used Clonezilla to maintain bootable images of both Mac and PC workstations in an enterprise environment.  Although, to achieve a bootable image I booted off a USB drive with the latest version of Clonezilla specifically created for that purpose.  Then I would save the image to an external (read: USB) drive.  Since that time, we have moved away from &quot;monolithic&quot; imaging and have turned to OS imaging and managed software installation (see Munki).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the end, Clonezilla is the only product that I have encountered that will create bare metal (read: bootable) images for Windows / Mac / Linux clients.  I believe the one exception maybe Apple's new APFS file system (that replaced HFS+), but I'm sure a solution is on the way...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my test network, I am backing up to a server through the SMB protocol and the Deja Dup Backup tool (available through AppCenter).  This is &lt;strong&gt;not&lt;/strong&gt; a bootable backup but a selected backup of the critical areas of my Elementary OS (Juno) system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-15T00:32:28.800" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18266" PostTypeId="1" CreationDate="2019-02-15T00:43:26.137" Score="1" ViewCount="126" Body="&lt;p&gt;I made a new USB installer using Rufus for the latest version of Elementary OS. The USB drive boots fine and I can use the OS. When I install, the installation works fine. Upon reboot I am stuck on a black screen with a blinking cursor and nothing else. It doesn't matter how long I leave it there. It stays blinking black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Linux Mint without any problems.&lt;/p&gt;&#xA;" OwnerUserId="17381" LastActivityDate="2019-02-16T16:16:25.390" Title="Problem booting after fresh install Juno 5.0" Tags="|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18268" PostTypeId="2" ParentId="18256" CreationDate="2019-02-15T02:56:37.887" Score="0" Body="&lt;p&gt;Welcome to the Elementary OS forum.  I too noticed signal strength issues with my Razer Blade Stealth (2018). My WiFi hardware is: Qualcomm Atheros QCA6174 and the driver: ath10k_pci.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was the command I used to find that data:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lspci -nnk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I followed that command with this:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;iwconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The result of that command should show the following line:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Power Management:on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, let's disable the WiFi power management.&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change: wifi.powersave = 3&lt;br&gt;&#xA;to: wifi.powersave = 2&lt;br&gt;&#xA;Exit and save.&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, let's make sure your WiFi hardware knows the correct regulatory domain.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/crda&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change: REGDOMAIN=&lt;br&gt;&#xA;to: REGDOMAIN=FCC&lt;br&gt;&#xA;Exit and save.&lt;br&gt;&#xA;&lt;em&gt;Note: FCC is the correct entry for Canada, United States and Mexico.  Please enter the correct code for your location.&lt;/em&gt;&lt;br&gt;&#xA;&lt;br&gt;&#xA;Time to &lt;strong&gt;reboot&lt;/strong&gt;.&lt;br&gt;&#xA;&lt;br&gt;&#xA;After the reboot re-issue this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;iwconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The result of that command should show the following line:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Power Management:off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the reboot, I've noticed that my WiFi indicator displays full WiFi signal strength like the other devices in the same room.  It is important to note that even if the wingpanel indicator shows less than 100% strength the SSID listing underneath the wingpanel is never less than 100% for this device at this distance from my access point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your &quot;mileage&quot; may vary, depending on your wireless gear, surroundings and/or other wireless interference (read: neighbors).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck! &lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-15T02:56:37.887" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18269" PostTypeId="2" ParentId="18239" CreationDate="2019-02-15T07:22:24.483" Score="1" Body="&lt;p&gt;Welcome to the Elementary OS forums!&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens if you go to Applications -&gt; Terminal and issue the command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nmcli d wifi list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the result of that command has the data you expect in the following areas: SSID, CHAN, BARS, SECURITY that is the first step.  For the second step, what are the results of this command (also in terminal).&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ping -c 3 8.8.8.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please let us know.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-15T07:22:24.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18271" PostTypeId="1" CreationDate="2019-02-15T08:54:22.233" Score="1" ViewCount="17" Body="&lt;p&gt;I was taking screenshots with &quot;conceal text&quot; enabled, And it crashed while taking a screenshot. Now all text on my screen is concealed. Even after restarting. I tried taking screenshots again with &quot;Conceal Text&quot; on and off, nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vpc4Z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vpc4Z.png&quot; alt=&quot;Screenshot is trying to tell something I can&amp;#39;t understand&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea what the error is.&lt;/p&gt;&#xA;" OwnerUserId="17385" LastActivityDate="2019-02-15T08:54:22.233" Title="All text on my screen is concealed after screenshot app crashed" Tags="|release-juno|screenshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18272" PostTypeId="1" AcceptedAnswerId="18296" CreationDate="2019-02-15T12:11:35.560" Score="3" ViewCount="245" Body="&lt;p&gt;I recently started using elementary OS and installed Firefox as my browser. I'm currently having a problem with the dropdowns, like the context menu or the input suggestion as they appear in wrong locations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can see attached two examples of it. &#xA;In one of the examples you see how whenever I do right click the context menu opens with the cursor on the middle of it instead of showing up on the bottom right of the cursor (as it usually is).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/2SxZM.png&quot; alt=&quot;Context menu&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the other example you can see how whenever I'm feeling a form and I get a suggestion for filling the input, the suggestion appears somewhere above the input bar, instead of appearing exactly bellow it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q1fgB.png&quot; alt=&quot;Input suggestion&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone that could help out with this problem?&lt;/p&gt;&#xA;" OwnerUserId="17218" LastActivityDate="2020-01-14T23:46:01.460" Title="Firefox Dropdowns in wrong location" Tags="|firefox|context-menu|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18274" PostTypeId="2" ParentId="6907" CreationDate="2019-02-15T13:51:59.307" Score="2" Body="&lt;p&gt;When creating the VM you will be asked to pick the Generation. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Generation 1&lt;/strong&gt; will work perfectly.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Generation 2&lt;/strong&gt; will work IF after you have created the VM using the wizard, you go into the settings of the virtual machine. Change the Security for &lt;strong&gt;Microsoft UEFI Certificate Authority&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;However, you will be limited to a screen resolution under 1920×1080. If it's not a problem for you then great! If you would like a bigger resolution you will need to install &lt;a href=&quot;http://www.xrdp.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;XRDP&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;with elementary OS 5 Juno&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17387" LastActivityDate="2019-02-15T13:51:59.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18275" PostTypeId="2" ParentId="18259" CreationDate="2019-02-15T16:55:41.177" Score="2" Body="&lt;p&gt;Welcome to the Elementary OS forum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just to conform that the standard user account has the proper privileges to their own home directory please try these steps.  Go to Applications -&gt; Terminal (or Win+T).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ls -al &quot;/home/userID&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where userID is the &lt;em&gt;name&lt;/em&gt; of the standard user account that you created.  The listing provided will show you the first level of the standard user's home directory.  You should see that userID and groupID are identical for &lt;strong&gt;everything&lt;/strong&gt; &lt;em&gt;except&lt;/em&gt; for the second line (that ends with ..), it should list the user as root and the group as root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are &lt;strong&gt;many&lt;/strong&gt; additional levels to the home directory where privileges could be changed, but starting with the first layer is a good place to start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other solutions include&lt;br&gt;&#xA;While in Terminal type the command:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;df -H&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Make sure that &lt;strong&gt;none&lt;/strong&gt; of the Use% is near to 100%.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, go to System Settings -&gt; User Accounts&lt;br&gt;&#xA;Then create &lt;em&gt;another&lt;/em&gt; standard user by clicking on the '+' icon in the lower left corner of the window.  Then try to log in as that user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I use my laptop on &lt;strong&gt;public&lt;/strong&gt; networks, I &lt;strong&gt;always&lt;/strong&gt; use my non-privileged account for security reasons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck! &lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-15T16:55:41.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18276" PostTypeId="2" ParentId="18258" CreationDate="2019-02-15T17:12:18.300" Score="0" Body="&lt;p&gt;After trying one more time, at beginning of installations , on menu to select which options of boot, there was three options to select, i just tried other option.&lt;/p&gt;&#xA;" OwnerUserId="17373" LastActivityDate="2019-02-15T17:12:18.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18277" PostTypeId="2" ParentId="18234" CreationDate="2019-02-15T17:14:45.897" Score="0" Body="&lt;p&gt;srda1989,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Welcome to the Elementary OS forum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first thing I would look at would be to determine what processes may (or may not) be hammering your powerful system.  One way to do this is through the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to Applications -&gt; Terminal (or Win+T)&lt;br&gt;&#xA;At the terminal prompt type the following command:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;top&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will show you (in real time) which processes are hammering away at your system.  The important things to look for are (1) anything that shows a high percentage in the %CPU column and (2) the %Cpu(s): line.  Especially the xx.x id number.  Theoretically, that number should be close to 100 as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If, on the other hand, some process is grabbing a high percentage of the CPU then it gives us some place to focus on solving your unresponsive issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, the top command will continue to run until you type the following letter:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-15T17:14:45.897" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18278" PostTypeId="1" AcceptedAnswerId="18281" CreationDate="2019-02-15T23:58:23.997" Score="2" ViewCount="324" Body="&lt;p&gt;I use NeoVim and &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt; is a reserved key for multiline select. In the past, I was able to use &lt;code&gt;dconf&lt;/code&gt; to disable these shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there still a way to do this in Juno?&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2019-02-16T16:09:39.380" Title="Disable Ctrl+C/Ctrl+V Shortcuts in Pantheon Terminal for Juno" Tags="|release-juno|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18279" PostTypeId="1" CreationDate="2019-02-15T23:59:13.000" Score="0" ViewCount="330" Body="&lt;p&gt;Can any of elementary OS 5's video applications play protected Blu-Ray discs?&#xA;Everything I've read about getting Blu-Ray to play on Linux looks complex and convoluted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your answers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Blu-Ray in question is the Red Dwarf S1-8 collection, and it has some discs encoded with AACS 66 and some with AACS 68.&#xA;Discs with 66 can play fine but the 68 discs do not.&#xA;Guess I'm just going to have to wait until MakeMKV can support it.&lt;/p&gt;&#xA;" OwnerUserId="17389" LastEditorUserId="18048" LastEditDate="2019-05-07T09:07:07.003" LastActivityDate="2019-10-04T11:00:19.620" Title="Protected Blu-Ray playback in elementary OS" Tags="|videos|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18280" PostTypeId="2" ParentId="18266" CreationDate="2019-02-16T03:24:38.373" Score="1" Body="&lt;p&gt;The issue was I had two SSDs in the computer and somehow Elementary did not like that. I was booting off the correct one, but somehow it wouldn't work unless I removed the unused SSD. Weird.&lt;/p&gt;&#xA;" OwnerUserId="17381" LastActivityDate="2019-02-16T03:24:38.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18281" PostTypeId="2" ParentId="18278" CreationDate="2019-02-16T10:26:22.787" Score="3" Body="&lt;p&gt;The dconf-key is located under &lt;code&gt;/io/elementary/terminal/settings/natural-copy-paste&lt;/code&gt;. If you change that value to false, &lt;code&gt;Ctrl+C&lt;/code&gt; and &lt;code&gt;Ctrl+V&lt;/code&gt; shouldn't be copying/pasting text anymore.&lt;/p&gt;&#xA;" OwnerUserId="17277" LastActivityDate="2019-02-16T10:26:22.787" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18282" PostTypeId="2" ParentId="18279" CreationDate="2019-02-16T13:49:13.283" Score="0" Body="&lt;p&gt;VLC should be able to play anything you throw at it&lt;/p&gt;&#xA;" OwnerUserId="17355" LastActivityDate="2019-02-16T13:49:13.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18283" PostTypeId="2" ParentId="18279" CreationDate="2019-02-16T16:04:24.937" Score="1" Body="&lt;p&gt;you need to install VLC Library know as libdvdcss to breaks the encryption, you can see the full answer &lt;a href=&quot;https://askubuntu.com/questions/811071/is-there-an-easy-way-to-watch-blu-ray-in-ubuntu-16-04&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2019-02-22T02:18:46.580" LastActivityDate="2019-02-22T02:18:46.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18284" PostTypeId="2" ParentId="18278" CreationDate="2019-02-16T16:09:39.380" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x4Dqi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x4Dqi.png&quot; alt=&quot;i use dconf-editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can use dconf-editor, and browse to &lt;code&gt;/io/elementary/terminal/settings/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2019-02-16T16:09:39.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18286" PostTypeId="2" ParentId="16979" CreationDate="2019-02-16T16:32:48.860" Score="1" Body="&lt;p&gt;I would like to append to C. Fong's excellent four step answer with my experience with a networked HP printer and CUPS. This is how I resolved getting an MFP HP LaserJet M475dw online with network scanning and fax capabilities.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I had to run &lt;code&gt;hp-setup&lt;/code&gt; this way&lt;br&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo hp-setup&lt;br&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I had the HP setup GUI screen in the foreground and the terminal screen in the background.  My printer needed drivers, before the GUI of &lt;code&gt;hp-setup&lt;/code&gt; could continue, I had to answer a few questions and allow the driver download through the terminal screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When everything was complete, I had my printer, fax and network scanning capabilities all in place and ready to go!  I did notice that Elementary OS Juno does lock down the wingpanel so the HP-Setup icon no longer makes an appearance, but that is OK.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;I have used the &lt;code&gt;lpadmin&lt;/code&gt; command to install printers in an enterprise environment -- it works like a charm!&lt;/li&gt;&#xA;&lt;li&gt;To complete my printing experience, I added PDF generation to the CUPS print queue.&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt install cups-ppdc &lt;/p&gt;&#xA;&lt;/blockquote&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-16T16:32:48.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18288" PostTypeId="1" AcceptedAnswerId="18322" CreationDate="2019-02-17T05:20:38.747" Score="0" ViewCount="938" Body="&lt;p&gt;I've got latest Elemenary OS installed and running quite nicely on my Surface Book. Everything is great except there is no touchscreen support. I've read about a custom Kernel called Jakeday Kernel but as a first time Linux user, I'm not exactly sure how to do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a driver I can install or is the only solution to install this new kernel? If so, can someone pat me on the head and tell me this is a safe (and fairly simple) thing to do?&lt;/p&gt;&#xA;" OwnerUserId="17399" LastActivityDate="2020-05-13T08:15:25.567" Title="Microsoft Surface TouchScreen support?" Tags="|touchscreen|surface-tablet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18289" PostTypeId="1" CreationDate="2019-02-17T09:07:45.847" Score="1" ViewCount="1009" Body="&lt;p&gt;New to modern Linux systems, I‘m looking for helpful advice installing elementary OS 5.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Trying to „clean“ install elementary 5.0 on a &lt;a href=&quot;https://everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-2-duo-2.4-15-santa-rosa-specs.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;MacBook Pro 3.1&lt;/a&gt; (Core2Duo) fails with the fatal error „grub install /dev/sda failed“. I tried various installation methods from fully automatic to manual but didn‘t succeed yet.&#xA;I can only boot into Linux from the stick after &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2377181&amp;amp;p=13817037#post13817037&quot; rel=&quot;nofollow noreferrer&quot;&gt;modifying the grubloader&lt;/a&gt;. Elementary or kubuntu are working quite well but any installation failed as described previously. Although the internal SSD was completely erased and formatted there seems to be an issue with partitions.&#xA;Helpful ideas are appreciated!&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="17401" LastActivityDate="2019-11-15T03:54:10.867" Title="Elementary OS 5.0 won‘t install on MacBook Pro 3.1 (Core2Duo)" Tags="|system-installation|macbook|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18291" PostTypeId="2" ParentId="18289" CreationDate="2019-02-17T15:41:17.680" Score="1" Body="&lt;p&gt;Welcome to the Elementary OS forum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am a fellow Macintosh enthusiast, although I have &lt;em&gt;not&lt;/em&gt; run into your specific issue, I did a bit of research and found the following:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on your specific model of MacBook Pro (circa 2007) you might be caught in the trap of the processor is 64-bit, however, the EFI only has a 32-bit, and consequently, only are capable of booting in 32-bit mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which &lt;a href=&quot;https://everymac.com/mac-answers/snow-leopard-mac-os-x-faq/mac-os-x-snow-leopard-64-bit-macs-64-bit-efi-boot-in-64-bit-mode.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Intel&lt;/a&gt; Macs have 64-bit processors? Which have a 64-bit EFI? Which are capable of booting in 64-bit mode?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Matt Gadient wrote a &lt;strong&gt;very&lt;/strong&gt; useful &lt;a href=&quot;https://mattgadient.com/2016/07/11/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models&quot; rel=&quot;nofollow noreferrer&quot;&gt;blog&lt;/a&gt; post describing the problem and a few different fixes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;br&gt;&#xA;Have you had the chance to try the &lt;a href=&quot;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-Repair&lt;/a&gt; Utility?&lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="17282" LastEditDate="2019-02-17T18:17:40.877" LastActivityDate="2019-02-17T18:17:40.877" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18292" PostTypeId="1" AcceptedAnswerId="18293" CreationDate="2019-02-17T17:06:38.580" Score="0" ViewCount="285" Body="&lt;p&gt;New Linux user here. I just installed Elementary OS Juno on my MS Surfacebook. What I've noticed is that in the Files app, it REALLY wants to launch the parent app. I just have to select a document and in a second, the app is launched.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's a bit hyper active. Is there any way to have select JUST select the file and wait for a double click to open?&lt;/p&gt;&#xA;" OwnerUserId="17399" LastActivityDate="2019-02-17T17:45:34.313" Title="Docs open on select?" Tags="|release-juno|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18293" PostTypeId="2" ParentId="18292" CreationDate="2019-02-17T17:45:34.313" Score="0" Body="&lt;p&gt;You can install elementary tweaks to adjust various settings to your liking (amongst which changing the single click behaviour). Run these commands to install it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then open settings, select tweaks, go to the &quot;files&quot; tab and uncheck single click.&lt;/p&gt;&#xA;" OwnerUserId="17355" LastActivityDate="2019-02-17T17:45:34.313" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18296" PostTypeId="2" ParentId="18272" CreationDate="2019-02-17T22:06:47.657" Score="1" Body="&lt;p&gt;Thanks to @dsSTORM for giving the idea to download Firefox via snap. I just did and the problem was solved completely!&lt;/p&gt;&#xA;" OwnerUserId="17218" LastActivityDate="2019-02-17T22:06:47.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18297" PostTypeId="1" CreationDate="2019-02-18T05:22:59.797" Score="1" ViewCount="316" Body="&lt;p&gt;I can't send third party apps like qBittorrent,KeepassXC to system tray instead it gets closed even when the necessary options are marked to use those on background system tray. &#xA;currently using Elementary OS juno with latest upgrade!&lt;/p&gt;&#xA;" OwnerUserId="17409" LastActivityDate="2019-02-19T00:30:04.477" Title="There is no system tray feature for third party apps i.e. qBittorrent, KeepassXC etc" Tags="|system|" AnswerCount="3" CommentCount="0" ClosedDate="2019-02-20T01:33:52.073" ContentLicense="CC BY-SA 4.0" />
  <row Id="18298" PostTypeId="2" ParentId="18297" CreationDate="2019-02-18T06:36:38.287" Score="0" Body="&lt;p&gt;In order to make the 3rd party application working and visible in the system tray, you need to have sni-qt package installed.&lt;/p&gt;&#xA;" OwnerUserId="10234" LastActivityDate="2019-02-18T06:36:38.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18299" PostTypeId="2" ParentId="18297" CreationDate="2019-02-18T06:38:18.000" Score="-1" Body="&lt;p&gt;There is no system tray in juno, apps will show notification badges on the dock. If you want the system tray back you have to rely on 3rd party workarounds.&lt;/p&gt;&#xA;" OwnerUserId="17355" LastActivityDate="2019-02-18T06:38:18.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18300" PostTypeId="2" ParentId="16700" CreationDate="2019-02-18T09:47:18.980" Score="0" Body="&lt;p&gt;After reading the issue (&lt;a href=&quot;https://github.com/elementary/os/issues/121&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/121&lt;/a&gt;) it appears that the issue is related to the cursor disappearing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two options:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Disable hardware acceleration - videos on youtube will work, but high definition videos elsewhere may not (if your processor can't handle the software decoding).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Move the cursor constantly while watching youtube videos, or watch them full screen.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note: I have also experienced this issue, and the above is true for me.&lt;/p&gt;&#xA;" OwnerUserId="5871" LastActivityDate="2019-02-18T09:47:18.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18301" PostTypeId="1" CreationDate="2019-02-18T09:55:34.960" Score="1" ViewCount="174" Body="&lt;p&gt;I just finished to set up my new desktop computer (i9-9900K and RTX 2080, with 2 27&quot; screens) on which I installed ElementaryOS.&#xA;I'll mainly use it for development, but also to play a bit (on Steam).&#xA;Everything works fine (good job on that!), execpt when an app is in full screen mode. It's completely frozen, until I click outside of the window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;open PHPStorm, switch to full screen&lt;/li&gt;&#xA;&lt;li&gt;click on a file to open it =&gt; nothing happens&lt;/li&gt;&#xA;&lt;li&gt;click on the other screen (PHPStorm loses focus) =&gt; PHPStorm view is updated, and the file is opened&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Tried with different apps, it's always the same behavior.&#xA;Got nvidia drivers 415 properly installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what could be the issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="17411" LastActivityDate="2019-02-18T09:55:34.960" Title="Full screen issue" Tags="|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18305" PostTypeId="1" CreationDate="2019-02-18T14:13:58.543" Score="1" ViewCount="37" Body="&lt;p&gt;I had hdd(empty disk) and ssd (with windows 10). After installation, for entry the system elementary OS my PC must be rebooted. And an error occurs(attached photo).&#xA;Installation options: on a free space of hdd (about 200gb) I installed: / (about 30gb), swap (about 3gb), /home (all remaining). Bootloader installed on ssd.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lQFnL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lQFnL.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17415" LastEditorUserId="17415" LastEditDate="2019-02-19T18:12:43.647" LastActivityDate="2019-02-19T18:12:43.647" Title="Error after installing the system" Tags="|system-installation|xorg|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18306" PostTypeId="1" AcceptedAnswerId="18308" CreationDate="2019-02-18T15:59:57.173" Score="0" ViewCount="3465" Body="&lt;p&gt;I installed eOS 5.0 on Virtual Box, its resolution is set to 800x600. How can I change it?&lt;br&gt;&#xA;I tried installed &lt;strong&gt;virtualbox-guest&lt;/strong&gt; by this command, but I stll cannot change the resolution.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install virtualbox-guest-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14004" LastActivityDate="2019-02-19T16:03:51.650" Title="How can I change the resolution on Virtual Box" Tags="|resolution|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18308" PostTypeId="2" ParentId="18306" CreationDate="2019-02-18T21:16:05.953" Score="1" Body="&lt;p&gt;Ives,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use VirtualBox almost daily.  I have a MacBook Pro with Elementary OS 5.0 and the screen resizes just fine.  I had two hoops to jump through first:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the Extension Pack&lt;br&gt;&#xA;a. Launch VirtualBox.  Go to Help -&gt; About VirtualBox.  Make a note about the version.&lt;br&gt;&#xA;b. Go to the &lt;a href=&quot;https://www.virtualbox.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;VirtualBox&lt;/a&gt; website. Click on Downloads.&lt;br&gt;&#xA;c. If your version of VirtualBox is not the latest, scroll down to VirtualBox older builds.&lt;br&gt;&#xA;d. Find the version number that matches what you found in step 1a.&lt;br&gt;&#xA;e. Download the Extension Pack for your version of VirtualBox.&lt;br&gt;&#xA;f. Go to your host's machine Downloads folder.&lt;br&gt;&#xA;g. Right click on Oracle_VM_VirtualBox_Extension... select Open in VirtualBox.&lt;br&gt;&#xA;h. Follow the instruction to install the Extension Pack.&lt;br&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Guest VM.&lt;br&gt;&#xA;a. Launch the guest VM where you want to expand the display.&lt;br&gt;&#xA;b. Login (if necessary).&lt;br&gt;&#xA;c. Go to Devices -&gt; Insert Guest Additions CD image...&lt;br&gt;&#xA;NOTE: Depending on your version, VirtualBox may ask to download an .iso file, if this happens to you, respond yes (or OK) to the dialog prompt.&lt;br&gt;&#xA;d. Go to Applitations -&gt; Files, under Devices you will see VBox_GAs_... click on that.&lt;br&gt;&#xA;e. On the top center of the screen you will see media &gt; userID &gt; VBox_GAs_...&lt;br&gt;&#xA;f. Right click on VBox_GAs_... Open with -&gt; Terminal.&lt;br&gt;&#xA;g. At the Terminal prompt type: &lt;code&gt;sudo ./VBoxLinuxAdditions.run&lt;/code&gt;&lt;br&gt;&#xA;h. After the installation is complete, reboot your Guest VM.&lt;br&gt;&#xA;i. You will see that you can click and drag the Guest VM window to whatever size works best for you.&lt;br&gt;&#xA;j. If all else fails, you could consider Full Screen Mode - Host+F for your Guest VM.&lt;br&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;br&gt;&#xA;This may fix the locked virtual CD issue.&lt;br&gt;&#xA;1. Make sure that your Elementary OS VM is &quot;powered down&quot;.&lt;br&gt;&#xA;2. In the VirtualBox app, select the name of your virtual Elementary OS machine and click on the Settings icon.&lt;br&gt;&#xA;3. Under Settings -&gt; Storage, under Controller IDE: will be an indented selection.  Right-click on VBoxGuestAdditions.iso, and select “Remove Attachment.&quot; There will be a confirmation box: click “remove”.&lt;br&gt;&#xA;4. Click the “+” CD icon next to Controller IDE: to add new optical drive. A dialog box will open. Choose “Leave Empty”.&lt;br&gt;&#xA;5. You will now see a CD icon with the word &quot;Empty&quot;.  Click the OK button to accept the changes.&lt;br&gt;&#xA;6. Try the item 2 checklist again -- from the beginning.&lt;br&gt;&lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="17282" LastEditDate="2019-02-19T16:03:51.650" LastActivityDate="2019-02-19T16:03:51.650" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18309" PostTypeId="2" ParentId="18297" CreationDate="2019-02-19T00:30:04.477" Score="1" Body="&lt;p&gt;the &quot;problem&quot; is that the Wingpanel-indicator-ayatana is no longer in elementary juno. if you want to install it, try the following link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://translate.google.cl/translate?sl=es&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=es-419&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fentornosgnulinux.com%2F2018%2F08%2F15%2Fcomo-instalar-wingpanel-indicator-ayatana-en-elementary-os-juno%2F&amp;amp;edit-text=&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;resume:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&#xA;sudo add-apt-repository ppa:yunnxx/elementary&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&#xA;sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change OnlyShowIn=Unity;GNOME; to OnlyShowIn=Unity;GNOME;Pantheon;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ctrl + O (save change) Ctrl + X (close)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cya.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-02-19T00:30:04.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18310" PostTypeId="1" CreationDate="2019-02-19T01:44:58.917" Score="1" ViewCount="27" Body="&lt;p&gt;I just installed Juno yesterday and initially both the vol keys and the PrtScreen key worked fine. I had some updates today and just recently noticed they both stopped working. (could be unrelated)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I got into Settings &gt; Keyboard &gt; Shortcuts &gt; Media I can see the volume up/down options are set to disabled. When I try to assign &quot;volume up&quot; to the vol up key (F6 on my keyboard) it is ignored. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, If I assign control-F6 it shows up as Control-Audio Raise Volume so the key is clearly mapped properly and working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also done: dconf &gt; org &gt; gnome &gt; settings-daemon &gt; plugins -&gt; media-keys and THEY are all set to default as well. Everything seems normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It appears the keyhandler is being used (and subsequently ignored) by some other part of the system. Any ideas what could be happening?&lt;/p&gt;&#xA;" OwnerUserId="17399" LastActivityDate="2019-11-16T13:04:12.840" Title="After update Volume and PrtScn no longer work" Tags="|release-juno|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18312" PostTypeId="1" CreationDate="2019-02-19T04:42:25.277" Score="1" ViewCount="53" Body="&lt;p&gt;I can't esc to Grub or anything. I simply get a black screen with one single '_' at the upper left hand corner of the screen.&lt;/p&gt;&#xA;" OwnerUserId="17423" LastActivityDate="2019-05-16T07:25:26.057" Title="Will not boot at all" Tags="|display|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18313" PostTypeId="1" CreationDate="2019-02-19T08:32:56.063" Score="0" ViewCount="325" Body="&lt;p&gt;I recently installed eos juno dual boot with windows 10. Initially i wasn't getting any kind of problems but from past few days sometimes files and folders get locked themselves automatically. I tried &quot;chown&quot; and &quot;chmod&quot; but nothing happened. After few days it unlocks all files and folders automatically but next day it gets locked again. Please help. I want to work on eos as my primary os for daily basis.&lt;/p&gt;&#xA;" OwnerUserId="17426" LastActivityDate="2019-02-19T08:32:56.063" Title="Files and folders lock" Tags="|release-juno|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18317" PostTypeId="2" ParentId="18236" CreationDate="2019-02-20T02:01:55.687" Score="2" Body="&lt;p&gt;As the log says, it may have been because the mirror was stuck while syncing. If you run your original &lt;code&gt;sudo apt update&lt;/code&gt; command it should now be fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If an error still occurs, you can try removing the apt cache with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -r /var/cache/apt/* /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2019-02-20T16:06:10.520" LastActivityDate="2019-02-20T16:06:10.520" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18318" PostTypeId="1" CreationDate="2019-02-20T05:35:27.287" Score="2" ViewCount="313" Body="&lt;p&gt;I want to create a custom command in startup applications that will open a terminal and run a command. The command is an alias for connecting to an ssh server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alias&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;schat&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ssh elem@10.10.0.2 -p 2022&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried using the following as a custom command for a startup application, but I just get a blank terminal window with no output and no way to input anything.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.terminal --execute=schat&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17435" LastActivityDate="2024-02-06T21:07:05.827" Title="Startup Application open terminal and run command" Tags="|pantheon-terminal|startup|ssh|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18319" PostTypeId="1" CreationDate="2019-02-20T14:19:18.643" Score="1" ViewCount="71" Body="&lt;p&gt;habe die App Systemeinstellungen (System Settings) deinstalliert. Wie bekomme ich diese wieder zurück oder neu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Danke euch.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Translation:&lt;/strong&gt;&lt;br&gt;&#xA;I have uninstalled the app System Settings. How do I get these back or new.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="17438" LastEditorUserId="16827" LastEditDate="2019-02-22T05:23:04.153" LastActivityDate="2020-11-26T21:35:20.407" Title="Die APP Systemeinstellungen ist nicht auffindbar (The APP system settings can not be found)" Tags="|settings|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18320" PostTypeId="2" ParentId="227" CreationDate="2019-02-20T19:34:38.250" Score="-1" Body="&lt;p&gt;the my-weather-indicator isn't working in juno ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;after doing this little workaround it works : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16502/missing-icons-in-the-wingpanel&quot;&gt;Missing icons in the wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17440" LastEditorUserId="17440" LastEditDate="2019-02-20T19:42:22.767" LastActivityDate="2019-02-20T19:42:22.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18322" PostTypeId="2" ParentId="18288" CreationDate="2019-02-20T23:54:57.990" Score="0" Body="&lt;p&gt;I installed the Jakeday Kernel kernel and things became unstable so I'm assuming the answer to this question is that there is no answer ;-(&lt;/p&gt;&#xA;" OwnerUserId="17399" LastActivityDate="2019-02-20T23:54:57.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18324" PostTypeId="1" CreationDate="2019-02-21T06:21:53.903" Score="1" ViewCount="396" Body="&lt;p&gt;After installing the latest elementary OS update, my windows, dock bar, top bar.. basically all desktop went big.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i've tried updating the scaling-factor to 0, 1, 2 like it says on other questions.... but seems it will do nothing, i still have the same big size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no current themes applied.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help will be great, thanky you!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my monitor resolution is 1024x768 which is setup correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Current elementary version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS 5.0 Juno&#xA;Built on Ubuntu 18.04.2 LTS&#xA;Linux 4.15.0-45-generic&#xA;GTK+ 3.22.30&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Current Drivers:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -C display&#xA;[sudo] password for gcalderon:           &#xA;  *-display                 &#xA;       description: VGA compatible controller&#xA;       product: 2nd Generation Core Processor Family Integrated Graphics Controller&#xA;       vendor: Intel Corporation&#xA;       physical id: 2&#xA;       bus info: pci@0000:00:02.0&#xA;       version: 09&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: msi pm vga_controller bus_master cap_list rom&#xA;       configuration: driver=i915 latency=0&#xA;       resources: irq:25 memory:f7800000-f7bfffff memory:e0000000-efffffff ioport:f000(size=64) memory:c0000-dffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Current scaling factor:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings get org.gnome.desktop.interface scaling-factor&#xA;uint32 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Current screen:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --query &#xA;Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192&#xA;VGA-1 connected primary 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm&#xA;   1024x768      60.00* &#xA;   800x600       60.32    56.25  &#xA;   848x480       60.00  &#xA;   640x480       59.94  &#xA;HDMI-1 disconnected (normal left inverted right x axis y axis)&#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cQE5H.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cQE5H.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17446" LastActivityDate="2023-12-10T04:09:41.180" Title="Large windows, dock bar, top bar, fonts" Tags="|release-juno|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18325" PostTypeId="2" ParentId="18229" CreationDate="2019-02-21T16:28:25.860" Score="0" Body="&lt;p&gt;Had the same problem. Just needed to install the drivers for the wifi adapter manually after the install; they somehow didn't get installed from the usb.&#xA;Just open a terminal window. Then command: &lt;code&gt;sudo apt-get install firmware-b43-installer&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This fixed it for me.&lt;/p&gt;&#xA;" OwnerUserId="17447" LastEditorUserId="16827" LastEditDate="2019-02-22T05:28:39.843" LastActivityDate="2019-02-22T05:28:39.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18327" PostTypeId="2" ParentId="17040" CreationDate="2019-02-21T22:25:53.350" Score="1" Body="&lt;p&gt;As of release, and a few months later, this in fact has not been fixed.  If someone call point me to a place that says otherwise, I would appreciate it, but I am forced to delete both 'freedesktop' and 'elementary' folders in /usr/share/sounds in order to disable sound effects.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I'm a fairly experienced user, so this is a pretty serious bug for the average user.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2019-02-21T22:25:53.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18329" PostTypeId="2" ParentId="15215" CreationDate="2019-02-22T01:45:23.850" Score="3" Body="&lt;p&gt;There are many ways without adding hot corners, installing third-party software or creating confusing configurations in the command line. Here's a step-by-step guide on how to minimize a window.&lt;/p&gt;&#xA;&lt;h1 id=&quot;method-1-sfwc&quot;&gt;Method 1&lt;/h1&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click on the app's icon in the dock&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h1 id=&quot;method-2-r8kc&quot;&gt;Method 2&lt;/h1&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Win&lt;/kbd&gt;+&lt;kbd&gt;H&lt;/kbd&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h1 id=&quot;method-3-pcto&quot;&gt;Method 3&lt;/h1&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/4245/8481&quot;&gt;Change your layout to add minimize buttons&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;For a Windows-like layout :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &amp;quot;{'Gtk/DecorationLayout': &amp;lt;':minimize,maximize,close'&amp;gt;}&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For something like Mac OS X :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &amp;quot;{'Gtk/DecorationLayout': &amp;lt;'close,minimize,maximize'&amp;gt;}&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To revert to the standard layout :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &amp;quot;{'Gtk/DecorationLayout': &amp;lt;'close:maximize'&amp;gt;}&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you're using an older version, use this instead.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;For a Windows-like layout :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout :minimize,maximize,close&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For something like Mac OS X :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close,minimize,maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To revert to the standard layout :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.appearance button-layout close:maximize&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="8481" LastEditorUserId="8481" LastEditDate="2021-07-26T18:32:28.913" LastActivityDate="2021-07-26T18:32:28.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18330" PostTypeId="2" ParentId="16548" CreationDate="2019-02-22T03:55:01.880" Score="1" Body="&lt;p&gt;In my case, I selected Hardware default in order to have it working.&lt;/p&gt;&#xA;" OwnerUserId="4786" LastActivityDate="2019-02-22T03:55:01.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18331" PostTypeId="1" CreationDate="2019-02-22T07:35:25.930" Score="1" ViewCount="66" Body="&lt;p&gt;I'm not sure how to explain this since I'm extremely new to using Linux, but after looking around for themes, I found OSX-Arc-White to be the exact theme I've wanted. The only issue is, the fonts in the menus have an extremely heavy fuzzy shadow which looks horrendous in my opinion. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HreRk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HreRk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/mFrPI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mFrPI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/Pihyq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Pihyq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: Is there any way to change the font and it's settings in the theme pack or folder, and if so, where and how would I do it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the Github link to the theme pack&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/thiagolucio/OSX-Arc-Shadow&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/thiagolucio/OSX-Arc-Shadow&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;" OwnerUserId="17452" LastActivityDate="2024-03-05T19:04:45.617" Title="Font in power/battery/wifi/applications has fuzzy shadow with OSX-Arc-White theme" Tags="|release-juno|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18332" PostTypeId="1" CreationDate="2019-02-22T09:48:55.400" Score="1" ViewCount="65" Body="&lt;p&gt;I have EOS freya installed since 2015 with no issues. Yesterday I did my last update. After I logged in I got this strange message, see the screenshot attached below&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I reinstalled graphic drivers and the issue disappeared, although now the font rendering is not as good as before. There is a lot blurring around fonts, and pdf that looked great before now are so badly rendered, unless I zoom a lot. It's like when you look at a picture with low dpi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I check/do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&#xA;Pietro&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fcZcc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fcZcc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2019-02-22T09:48:55.400" Title="Freya font rendering problem after last update" Tags="|release-freya|graphics|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18334" PostTypeId="1" AcceptedAnswerId="18342" CreationDate="2019-02-22T15:18:02.083" Score="0" ViewCount="592" Body="&lt;p&gt;I installed xfdesktop and my login screen and background were changed to the green screen and the mouse :( &#xA;I managed to change the background back to my selection, but the login screen has not changed. &#xA;I looked for the solution on the forum, it said to add the selected picture into usr/share/backgrounds/&#xA;I found the folder but it does not let me delete pictures in there, it says I don't have the permission? How to get in there WITH permissions?&#xA;Thanks!&#xA;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="16910" LastEditDate="2019-02-22T15:44:57.627" LastActivityDate="2019-02-23T17:10:25.423" Title="How to delete desktop pictures in usr/share/backgrounds?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18335" PostTypeId="1" CreationDate="2019-02-22T17:35:46.693" Score="0" ViewCount="820" Body="&lt;p&gt;I recently had an issue relating to BootCamp that rendered my Mojave partition unbootable, so I got interested on how to read that APFS partition to retrieve the files using my elementary OS Juno, saved by access through Grub. Fortunately there is a free solution to perform this recovery through apfs-fuse.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="16827" LastEditDate="2019-05-07T09:07:36.173" LastActivityDate="2019-10-04T14:00:45.850" Title="How to mount a Mojave/HighSierra APFS partition as read only in elementary OS?" Tags="|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18336" PostTypeId="2" ParentId="18335" CreationDate="2019-02-22T17:35:46.693" Score="1" Body="&lt;p&gt;Plan&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;There's a &#xA;free tool to mount APFS drive in linux: apfs-fuse &lt;a href=&quot;https://github.com/sgan81/apfs-fuse&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/sgan81/apfs-fuse&lt;/a&gt; for Linux&lt;/li&gt;&#xA;&lt;li&gt;installation process&#xA;prerequisites (taken from &lt;a href=&quot;https://null-byte.wonderhowto.com/how-to/hacking-macos-break-into-macbook-encrypted-with-filevault-0185177/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; walkthrough)&lt;/li&gt;&#xA;&lt;li&gt;compiling&#xA;install missing dependencies by googling the error messages, simply relaunch make&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;There are many packages that need to be installed to run apfs-fuse. &#xA;use the below command to update APT&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, install the required dependencies with apt-get, as seen below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt-get install zlib1g bzip2 gcc-8-base build-essential cmake clang icu-devtools libicu-dev libghc-bzlib-dev libfuse-dev libattr1-dev&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clone the Apfs-Fuse Repository:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, install Git with apt-get install git.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;apt-get install git&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, clone the apfs-fuse repository with git clone github.com/sgan81/apfs-fuse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;git clone https://github.com/sgan81/apfs-fuse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change into the newly created apfs-fuse/ directory using the cd command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd apfs-fuse/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update the Submodules:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use git submodule init to initialize the LZFSE compression submodule.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;git submodule init&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, use git submodule update to update the LZFSE compression submodule.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;git submodule update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wrap Up the Installation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new directory called build using the mkdir command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mkdir build&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, change into the directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd build/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, compile with CMake, a software for managing the build process of software using a compiler-independent method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cmake ..&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last, use make, a utility that will determine automatically which pieces of a program need to be recompiled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Test Apfs-Fuse:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it for downloading and compiling apfs-fuse. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apfs-fuse's available options can be viewed using the ./apfs-fuse command. Change to the directory where apfs-fuse is located. (/bin or in my case, build).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;./apfs-fuse&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Options:&#xA;-d level      : Enable debug output in the console.&#xA;-o options    : Additional mount options.&#xA;-v volume-id  : Specify number of volume to be mounted.&#xA;-r passphrase : Specify volume passphrase. The driver will ask for it if needed.&#xA;-s offset     : Specify offset to the beginning of the container.&#xA;-p partition  : Specify partition id containing the container.&#xA;-l            : Allow driver to return potentially corrupt data instead of failing, if it can't handle something.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create the Mount Destination:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new directory called my_apfs_partition using the mkdir command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mkdir /tmp/my_apfs_partition&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use Apfs-Fuse to mount the Partition&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;./apfs-fuse &amp;lt;partition&amp;gt; &amp;lt;mount destination&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's an example of the command I used to mount my MacBook's internal hard drive. When this command is run, apfs-fuse will mount the partition - if encrypted by File Vault, it will prompt for a password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;./apfs-fuse /dev/sda2 /tmp/my_apfs_partition&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your APFS partition will then be browsable from that directory! &lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2019-02-24T06:19:35.843" LastActivityDate="2019-02-24T06:19:35.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18337" PostTypeId="2" ParentId="18096" CreationDate="2019-02-22T22:37:46.237" Score="1" Body="&lt;p&gt;This worked for me &lt;a href=&quot;https://www.techrepublic.com/article/how-to-install-the-nextcloud-client-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to install the Nextcloud Client on Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17456" LastActivityDate="2019-02-22T22:37:46.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18338" PostTypeId="1" CreationDate="2019-02-23T00:32:40.150" Score="1" ViewCount="127" Body="&lt;p&gt;Currently, when I take a screenshot using the shortcut keys (&lt;code&gt;PrtSc&lt;/code&gt;, &lt;code&gt;Shift&lt;/code&gt;+&lt;code&gt;PrtSc&lt;/code&gt;, etc.), it is always saved to ~/Pictures. I would like it to save to ~/Pictures/Screenshots. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using dconf-editor, I have tried setting &lt;code&gt;io.elementary.screenshot-tool folder-dir&lt;/code&gt; to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;~/Pictures/Screenshots/&lt;/li&gt;&#xA;&lt;li&gt;/home/USER/Pictures/Screenshots/&lt;/li&gt;&#xA;&lt;li&gt;file:///home/USER/Pictures/Screenshots/&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I have also tried omitting the slash at the end and putting the string in single and double quotes, and logging out/restarting after changing the setting. None of this works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there actually a way to do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Note: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5384/change-the-folder-where-screenshots-are-saved&quot;&gt;this previous question&lt;/a&gt; is about gnome-screenshot, a different program than screenshot-tool.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; this problem was fixed as of the latest Gala release! Many thanks to the hardworking developers.&lt;/p&gt;&#xA;" OwnerUserId="17458" LastEditorUserId="17458" LastEditDate="2019-03-03T06:31:28.773" LastActivityDate="2019-03-03T06:31:28.773" Title="How do I change the folder where screenshots are saved?" Tags="|keyboard-shortcuts|screenshot|" AnswerCount="2" CommentCount="0" ClosedDate="2019-02-24T23:27:47.327" ContentLicense="CC BY-SA 4.0" />
  <row Id="18341" PostTypeId="2" ParentId="18338" CreationDate="2019-02-23T15:46:32.773" Score="0" Body="&lt;p&gt;I tried to fix this myself but I don't believe there is a simple way. However, there is a workaround that I'm using.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;set your folder dir in dconf-editor (as you already did)&lt;/li&gt;&#xA;&lt;li&gt;map custom command &lt;code&gt;io.elementary.screenshot-tool&lt;/code&gt; to &lt;code&gt;Print&lt;/code&gt; button using the &lt;code&gt;keyboard settings&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;That's it. Now each time you hit &lt;code&gt;Print&lt;/code&gt; button you'll get the &lt;code&gt;screenshot-tool&lt;/code&gt; opened, but most importantly, the app will have you folder dir from &lt;code&gt;gsettings&lt;/code&gt; set as default.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-02-23T15:46:32.773" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18342" PostTypeId="2" ParentId="18334" CreationDate="2019-02-23T17:10:25.423" Score="2" Body="&lt;p&gt;Fred,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is one method for changing the login screen for Elementary OS - Juno.&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Save a picture of your choice in ~/Pictures&lt;br&gt;&#xA;For simplicity sake, my login picture will be called Login.jpg (restricting the filename of your picture to a single word followed by .jpg makes this easier, but that is &lt;strong&gt;not&lt;/strong&gt; a necessity).&lt;br&gt; &lt;/li&gt;&#xA;&lt;li&gt;open Terminal via Applications -&gt; Terminal (or Win+T)&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type: &lt;code&gt;cd /usr/share/backgrounds&lt;/code&gt;&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type: &lt;code&gt;sudo rm elementaryos-default&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; Enter your login password when prompted.&lt;/li&gt;&#xA;&lt;li&gt;Type: &lt;code&gt;sudo cp ~/Pictures/Login.jpg Login.jpg&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type: &lt;code&gt;sudo ln -s Login.jpg elementaryos-default&lt;/code&gt;&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type: &lt;code&gt;ls -al&lt;/code&gt; (check all folder privileges - everything should look identical)&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Deleting a picture in this directory can be accomplished with &lt;code&gt;sudo rm pictureName.jpg&lt;/code&gt; Where pictureName is replaced with the filename of what you want to delete.&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;&lt;em&gt;Reboot&lt;/em&gt;&lt;/strong&gt;&lt;br&gt;&#xA;&lt;br&gt;&#xA;&lt;strong&gt;Disclaimer:&lt;/strong&gt; Using &lt;code&gt;sudo&lt;/code&gt; gives you carte blanche (read: total control) over your system.  Allow me to cite Ben Parker's words of wisdom:&lt;br&gt;&#xA;&quot;With great power comes great responsibility.&quot;&lt;br&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-02-23T17:10:25.423" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18343" PostTypeId="2" ParentId="18229" CreationDate="2019-02-23T19:38:15.710" Score="0" Body="&lt;p&gt;Did the wifi work when you bootet into Juno from the thumb drive? If so, did you install updates while the system was written to the HDD? Do you use any 3rd party software (bootloader or bootmanager)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem with my late 2007 MBP is, that it boots and run well from the usb-stick, even wifi works perfectly. But the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18289/elementary-os-5-0-won-t-install-on-macbook-pro-3-1-core2duo&quot;&gt;installer crashes&lt;/a&gt; while it writes the system to the HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far, I have no clue why.&lt;/p&gt;&#xA;" OwnerUserId="17401" LastActivityDate="2019-02-23T19:38:15.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18344" PostTypeId="1" CreationDate="2019-02-23T20:04:23.653" Score="1" ViewCount="120" Body="&lt;p&gt;Am interest installing the Juno. Just want to make sure it will run smoothly on this laptop or not. I have the VivoBook W202na. Changing over from Windows 10 because of poor performance. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Display&#xA;11.6&quot; HD (1366*768), matte&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor&#xA;Intel® Dual-Core Celeron N3350 1.1GHz (Turbo up to 2.4GHz)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Graphics&#xA;Intel HD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Memory&#xA;4GB LPDDR3 (On Board)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Storage&#xA;64GB EMMC&quot;&#xA;- Source: &lt;a href=&quot;https://store.asus.com/us/item/201804AM060000009/-ASUS-VivoBook-W202NA-YS03-Rugged-11.6-inch-K-12-Education-Laptop,-Intel%C2%AE-processor-,-4GB-Ram,-64GB-emmc-flash-storage,-spill-proof-keyboard,-Windows-10-S&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://store.asus.com/us/item/201804AM060000009/-ASUS-VivoBook-W202NA-YS03-Rugged-11.6-inch-K-12-Education-Laptop,-Intel%C2%AE-processor-,-4GB-Ram,-64GB-emmc-flash-storage,-spill-proof-keyboard,-Windows-10-S&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do you think?&lt;/p&gt;&#xA;" OwnerUserId="17462" LastActivityDate="2019-03-16T16:36:09.957" Title="ASUS VivoBook W202na : Will it run" Tags="|laptop|release-juno|asus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18345" PostTypeId="2" ParentId="5384" CreationDate="2019-02-23T20:39:00.840" Score="1" Body="&lt;p&gt;Please not that with the next release of Gala screenshots will be stored in a &lt;code&gt;~/Pictures/Screenshots/&lt;/code&gt; folder.&lt;br&gt;&#xA;Gala is elementary OS's window manager and the thing that's responsible for taking screenshots.&lt;br&gt;&#xA;This was fixed in this PR: &lt;a href=&quot;https://github.com/elementary/gala/pull/459&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/pull/459&lt;/a&gt;&lt;br&gt;&#xA;Currently we're on Gala version 0.3.2.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-02-23T20:45:09.673" LastActivityDate="2019-02-23T20:45:09.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18346" PostTypeId="2" ParentId="18338" CreationDate="2019-02-23T20:44:26.403" Score="0" Body="&lt;p&gt;Please note that with the latest release of Gala screenshots will be stored in a &lt;code&gt;~/Pictures/Screenshots/&lt;/code&gt; folder.&lt;br&gt;&#xA;This is Gala version &lt;code&gt;0.3.2~r688+pkg45~ubuntu5.0.1&lt;/code&gt; released on 2019-02-25.&#xA;Gala is elementary OS's window manager and the thing that's responsible for taking screenshots.&lt;br&gt;&#xA;This was fixed in this PR: &lt;a href=&quot;https://github.com/elementary/gala/pull/459&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/pull/459&lt;/a&gt;  &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-02-27T15:32:52.463" LastActivityDate="2019-02-27T15:32:52.463" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18347" PostTypeId="1" CreationDate="2019-02-24T06:47:56.460" Score="0" ViewCount="103" Body="&lt;p&gt;I found myself in that situation where my laptop with originally 4 different boots was taken out of service by an attempt to use BootCamp, after the attempt, a BootCamp partition was successfully created, but the install failed. Trying to recover and unify the partitions again under MacOS recovery, the machine closed off completely stating no available device could be booted from. Even in any MacOS recover modes, USB sticks install wouldn't work except MacOS internet recovery. And my legacy 6,1 MacBook Pro could not even boot from rescue CD/DVD's/USB's since the other machine we had had a Mojave issue not having an access to the optical drive... Nightmarish situation: no solution seemed left. But there is!&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2024-02-28T17:04:45.567" Title="How to recover EOS installation on MacBook Pro when no system is longer recognized including USB/Optical boots" Tags="|refind|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18348" PostTypeId="2" ParentId="18347" CreationDate="2019-02-24T06:47:56.460" Score="0" Body="&lt;p&gt;The solution that came to my mind, is that I had a sufficiently large USB stick (the only thing I could do is installing MacOS somewhere). Spoof it as a system-install accepted macOS install drive: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;formatting it through MacOS emergency mode, in MacOS Extended, selecting GUID-partition table in Disk Utility (I did it on another machine for the safety sake) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;then start internet recovery install (I decided to go for OSX Lion, to have the smallest install possible, which was what the default proposition to install made by the recovery mode), and have Lion installed through download on the USB Thumb drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It took approx. 2 hours, but it worked: as soon as I could restart in the newly installed Lion, I could install Firefox and download refind zip binary, extract it onto my Lion's desktop, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;restart again in safe mode (option+R) and follow the &lt;a href=&quot;https://github.com/aroman/elementary-on-a-mac&quot; rel=&quot;nofollow noreferrer&quot;&gt;procedure&lt;/a&gt; to install refind from the terminal there, as the refind install is recognized again, by the terminal where I placed it, on my MacOS Lion desktop!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After restarting (and refind confirming the install is successful), I had access again to my ElementaryOS multi-boot, seamlessly (only the order was changed, so I had to test which one was my latest Juno install). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Walk in the park! &lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2019-02-24T07:30:56.473" LastActivityDate="2019-02-24T07:30:56.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18351" PostTypeId="2" ParentId="18344" CreationDate="2019-02-24T23:33:30.790" Score="0" Body="&lt;p&gt;The only thing on your list that does not meet &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementarys recommended system specifications&lt;/a&gt; is the Intel Celeron Dual-Core Processor. You're base-clock is relatively low and you get no hyper-threading, so no pretending to be a quad core when you need it. That said the turbo is not that bad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS won't make this computer a powerhouse, but it should run relatively okay. Don't take performance you see off a USB test as representative. I can't comment on whether or not you will encounter any driver issues, specifically with Wi-Fi.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2019-02-24T23:33:30.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18354" PostTypeId="1" CreationDate="2019-02-25T13:27:59.927" Score="1" ViewCount="165" Body="&lt;p&gt;The original iso-file from elementary webpage doesn't work for installation, so i have successfully installed with iso from &lt;a href=&quot;https://mattgadient.com/2016/07/11/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mattgadient.com/2016/07/11/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installation boot stops by &quot;changing to intel from vesa vsg&quot;. Only rescue is to power off the macbook. Curiosly after second boot try, everything is ok and the Desktop appears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the next shutdown and boot, same problem: boot stops.&#xA;Hard Reset, then boot ok.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm confused…&#xA;Does anybody have an idea what to do to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you, and sorry for my bad english, im from Germany.&lt;/p&gt;&#xA;" OwnerUserId="17470" LastActivityDate="2019-02-25T13:27:59.927" Title="elementary 5.0 boot problem on macbook 2,1 (late 2006)" Tags="|boot|macbook|intel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18355" PostTypeId="1" CreationDate="2019-02-25T16:05:34.783" Score="1" ViewCount="19" Body="&lt;p&gt;Why are the events for a given day in the calendar app sorted by reverse alphabetical? Shouldn't it be sorted by start time? That seems pretty standard with calendar apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From looking at the code, there does not seem to be a way to change this with configuration.&lt;/p&gt;&#xA;" OwnerUserId="17473" LastActivityDate="2019-02-25T16:05:34.783" Title="Calendar App Sorts by Reverse Alphabetical" Tags="|calendar|user-interface|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18357" PostTypeId="1" AcceptedAnswerId="18363" CreationDate="2019-02-25T19:20:42.823" Score="0" ViewCount="156" Body="&lt;p&gt;Why some keyboard shortcuts, listed as available, are not working in Epiphany? For example: &lt;code&gt;Shift&lt;/code&gt; + &lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;N&lt;/code&gt; or &lt;code&gt;Shift&lt;/code&gt; + &lt;code&gt;Ctrl&lt;/code&gt; + &lt;code&gt;T&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2019-02-26T19:13:55.733" Title="Epiphany keyboard shortcuts" Tags="|release-juno|keyboard-shortcuts|epiphany|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T20:57:57.073" ContentLicense="CC BY-SA 4.0" />
  <row Id="18358" PostTypeId="1" CreationDate="2019-02-25T22:26:56.980" Score="0" ViewCount="179" Body="&lt;p&gt;I removed Windows 10 totally from pc and installed elementary juno os with full hard disk encryption. Now I want to remove elementary os entirely and install ubuntu but am having difficulties with that. I have also tried to boot ubuntu from a USB drive, but all to no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm almost a total noob, someone please help me.&lt;/p&gt;&#xA;" OwnerUserId="17476" LastActivityDate="2019-03-28T06:01:51.043" Title="How can I remove elementary os totally and install ubuntu?" Tags="|release-juno|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18361" PostTypeId="2" ParentId="17168" CreationDate="2019-02-26T13:31:49.650" Score="0" Body="&lt;p&gt;Use dconf-editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;go to:&#xA;org.pantheon.desktop.gala.behavior.overlay-action&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and change the value to empty as below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FB3Iv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FB3Iv.png&quot; alt=&quot;dconf editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to install dconf:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install dconf-editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or find this in AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS.&#xA;It took me many months to figure out how to do this. :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry but I think it is as the most annoying and pointless function of the elementary OS, at least it should be using a less intrusive shortcut.&lt;/p&gt;&#xA;" OwnerUserId="17480" LastActivityDate="2019-02-26T13:31:49.650" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18363" PostTypeId="2" ParentId="18357" CreationDate="2019-02-26T19:13:55.733" Score="1" Body="&lt;p&gt;It's a bug in elementary's patch to remove the app menu. &lt;a href=&quot;https://github.com/elementary/os-patches/issues/17&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here is the bug report.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-02-26T19:13:55.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18364" PostTypeId="1" CreationDate="2019-02-26T20:25:08.110" Score="0" ViewCount="29" Body="&lt;p&gt;When I want to type in uppercase (for example) I hold shift during my typing. However, I notice that Elementary is doing something odd: when I press shift key, even though I release it immediately, it keeps its behavior and type in uppercase for only one character, like I'm holding shift key or typing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if it's a bug but I didn't find any settings to change this setting.&lt;/p&gt;&#xA;" OwnerUserId="17238" LastActivityDate="2020-02-28T09:44:00.640" Title="Shift is switching keys when pressed 1 time" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18365" PostTypeId="2" ParentId="16247" CreationDate="2019-02-26T21:17:16.360" Score="1" Body="&lt;p&gt;The other answer is correct, but you could use a USB wi-fi adapter. Regardless of the method you choose, you want to install the &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; package from the command line or the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="16939" LastActivityDate="2019-02-26T21:17:16.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18366" PostTypeId="1" CreationDate="2019-02-26T22:18:55.320" Score="0" ViewCount="55" Body="&lt;p&gt;In windoze, my email client has this text at the end of every email:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sent from Mail for Windows 10&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Is there a way to set the email client in Elementary to do something like this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Sent from Mail for ElementaryOS&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="4254" LastActivityDate="2019-04-07T04:24:32.140" Title="Is there a default email template" Tags="|release-juno|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-18T14:48:49.743" ContentLicense="CC BY-SA 4.0" />
  <row Id="18368" PostTypeId="1" CreationDate="2019-02-27T04:16:36.460" Score="0" ViewCount="22" Body="&lt;p&gt;I pressed something ( not sure what) and my elementary system language changed into something I can't understand. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I set it back to English?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See attached screenshot&lt;img src=&quot;https://i.stack.imgur.com/WiCQp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="17486" LastActivityDate="2019-02-27T20:01:08.190" Title="How do I set it back to proper language" Tags="|language|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18369" PostTypeId="1" CreationDate="2019-02-27T09:36:02.153" Score="1" ViewCount="26" Body="&lt;p&gt;Currently, just a simple click will open URLs in the browser. It's really annoying because I never wanted to open or download something. Is that possible to change it to &lt;code&gt;ctrl&lt;/code&gt; + click?&lt;/p&gt;&#xA;" OwnerUserId="17489" LastActivityDate="2019-02-27T09:36:02.153" Title="How to change terminal to use Ctrl + Click to open URL for juno?" Tags="|pantheon-terminal|release-juno|click|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18371" PostTypeId="1" CreationDate="2019-02-27T14:16:14.957" Score="2" ViewCount="97" Body="&lt;p&gt;I'm just new to Elementary OS,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After install Juno, my laptop speaker work fine, but when I connect my headphone, there is no sound in headphone but the sound go through speaker as normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I has tried something (PulseAudio Volume Control) but it does not work out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below is my sound setting img and my alsa link: &lt;a href=&quot;http://alsa-project.org/db/?f=10ef87553a781ec4fab8852389fe7acc1db25ac6&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://alsa-project.org/db/?f=10ef87553a781ec4fab8852389fe7acc1db25ac6&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2VjSd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2VjSd.png&quot; alt=&quot;Settings/Sound&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Edit: solution found&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terminal, enter the command &lt;code&gt;alsamixer&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An ASCI UI will open, use the arrow keys to find the item: &quot;HP/speaker Auto Detect&quot;. it will say &quot;Off&quot; next to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press M and the &quot;Off&quot; tag will disappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re-plug your headphones. &lt;/p&gt;&#xA;" OwnerUserId="17491" LastEditorUserId="26" LastEditDate="2019-03-07T00:11:45.223" LastActivityDate="2019-04-06T01:01:15.333" Title="Juno, sound work but headphone does not (alienware m17xr4)" Tags="|release-juno|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18372" PostTypeId="1" CreationDate="2019-02-27T19:26:21.327" Score="1" ViewCount="468" Body="&lt;p&gt;I'm trying to use Music, and I am unable to get it to work, and there are no instructions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I try to use Import music. I tells me that the song from the CD are already in my music folder. They are not, it's empty.&#xA;I try the other option - load music from an external disk, and the app crashes. Continually. It doesn't work again until I dismount the drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question 1: How do I import music in the Music app?&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I use Sound Juicer to rip the CD, and Picard to ensure the tags are ok. Music can play the files that are now in it's library, but it doesn't show the album art, even though Picard sees it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Question 2: How do I get the artwork as shown on your website: elementary.io&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To me, this is a deal breaker, as it doesn't work. &lt;/p&gt;&#xA;" OwnerUserId="4254" LastEditorUserId="68" LastEditDate="2019-04-04T22:18:34.503" LastActivityDate="2019-05-04T23:02:40.527" Title="How to import music from CD and display its artwork?" Tags="|release-juno|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18373" PostTypeId="2" ParentId="18368" CreationDate="2019-02-27T20:01:08.190" Score="1" Body="&lt;p&gt;You can try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First open &lt;strong&gt;Terminal&lt;/strong&gt; and type the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-locale LC_ALL=en_US.UTF-8 LANG=en_US.UTF-8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Second logout and login again or reboot your machine.&lt;/p&gt;&#xA;" OwnerUserId="17493" LastActivityDate="2019-02-27T20:01:08.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18374" PostTypeId="1" CreationDate="2019-02-27T20:52:08.860" Score="1" ViewCount="2081" Body="&lt;p&gt;I need your help in sorting out this installation issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had installed Elementary OS successfully, where I gave the permission to allow download of third party software. This is because I need support for NVIDIA hardware for my laptop. My laptop specs are: HP Omen, Core i7, 16GB RAM, 128GB SSD, 1TB HDD with &lt;strong&gt;NVIDIA GeForce GTX 1050&lt;/strong&gt;. I am installing the OS on 128 GB SSD. Once the installation was complete, it asked me to restart. On restart I am getting the following errors and the laptop gets hanged for long periods of time. Similar behaviour is observed when I try to install Ubuntu LTS version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ERROR FROM UBUNTU REBOOT AFTER INSTALLATION&#xA;&lt;a href=&quot;https://i.stack.imgur.com/dsewM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dsewM.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ERROR FROM ELEMENTARY OS REBOOT AFTER INSTALLATION&#xA;&lt;a href=&quot;https://i.stack.imgur.com/u90ME.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u90ME.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After long hours of no activity, I had to restart the computer. On re-booting, it gave me an option to select &quot;Try elementary OS&quot; (the bootable USB is still plugged in). So I chose this option in search of some hope. This selection leaves me with a blank screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moreover, when I removed my bootable USB and restarted my laptop, I was able to see the desktop screen but when I click on apps like Settings, or Calendar it gets hanged and then I will have to forcefully shut down using hardware keys. If I open a terminal or browser it is not hanging.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not able to help myself. Do help me fix this issue. If you need any more information, I will try my best to provide. Please share your thoughts. Thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;I repeated the entire process again. Installed the new OS by cleaning the entire disk, giving permission to install third party apps. After it said installation is complete, I removed the bootable USB and clicked on Restart Now. When it reboots, it gave usual errors, and then said &quot;Please remove the installation medium, then press ENTER&quot;. So I did. Even on this occasion, it got stuck at &lt;code&gt;Synchronizing SCSI cache&lt;/code&gt;&#xA;After some time I just plugged the bootable USB again, and it went past that and now it is stuck at &lt;code&gt;Attached SCSI removable disk&lt;/code&gt;. I have no clue what his happening. Sharing the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q4UqT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q4UqT.jpg&quot; alt=&quot;Update&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17495" LastEditorUserId="17495" LastEditDate="2019-02-28T04:14:14.547" LastActivityDate="2023-10-01T15:01:17.877" Title="Unable to install Elementary OS: Hangs during reboot after installation" Tags="|nvidia|ubuntu|install|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18376" PostTypeId="1" AcceptedAnswerId="18402" CreationDate="2019-02-28T06:53:45.747" Score="1" ViewCount="599" Body="&lt;p&gt;To save the area to the clipboard, I have the default key combination Shift+Ctrl+Printscreen. Then I cut the area, but there is nothing in the clipboard (check via Ctrl+V). It happened a week ago.&lt;/p&gt;&#xA;" OwnerUserId="17498" LastActivityDate="2019-03-09T08:08:08.327" Title="screenshot is not saved to clipboard" Tags="|screenshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18379" PostTypeId="2" ParentId="18324" CreationDate="2019-02-28T10:28:35.167" Score="0" Body="&lt;p&gt;have you tried to set the screen to LoDPI on display settings&gt;scaling factor?&lt;/p&gt;&#xA;" OwnerUserId="17501" LastActivityDate="2019-02-28T10:28:35.167" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18382" PostTypeId="1" AcceptedAnswerId="18586" CreationDate="2019-02-28T17:40:37.530" Score="0" ViewCount="70" Body="&lt;p&gt;I might be in the wrong place and maybe should report this to Mozilla, but no one else seems affected by searching around, so I believe it might be elementary OS-specific.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since version 65, when you minimize Firefox by clicking the dock icon and maximize again, going to a new page or reloading the current one gives you a blank page. The pages loads, as you can see the site name and favicon, but nothing is displayed. Sometimes it happens right away, other times you have to minimize/ṃaximize a couple times. Also the hamburger menu is unresponsive. The only cure is to relaunch Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried so far:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Disabling hardware acceleration&lt;/li&gt;&#xA;&lt;li&gt;Restarting Firefox in Safe Mode&lt;/li&gt;&#xA;&lt;li&gt;Clear cookies and cache&lt;/li&gt;&#xA;&lt;li&gt;Update to 65.0.1&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;It might be related &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18178/firefox-unresponsive-after-upgrade-to-version-65&quot;&gt;to this question.&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theme is basic light, only add-on is AdGuard. Using Nouveau stock display driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on Juno 5.0 with all the latest updates, Dell XPS 9550.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="16104" LastEditDate="2019-02-28T20:15:43.020" LastActivityDate="2019-03-27T15:08:41.197" Title="Firefox 65 gives a blank page when minimized/maximized" Tags="|release-juno|firefox|web-browser|minimize|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18383" PostTypeId="1" CreationDate="2019-02-28T19:33:12.047" Score="4" ViewCount="471" Body="&lt;p&gt;I've just installed elementary OS on to a HP Steam laptop which was extremely slow on Windows. elementary OS was installed as the primary OS, no dual boot, and I selected the option to completely wipe the hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have absolutely no Internet connection and I also have no idea how to boot into the BIOS on this laptop. I tried following &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12404/wireless-internet-connection-loki-new-clean-install&quot;&gt;this guide&lt;/a&gt;, but the Terminal output told me that it can't find the Wi-Fi device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's as far as I've gotten. I'm not even sure I can reinstall Windows at this point as I don't know how to access the BIOS on this laptop so I'm in pretty dire need of some help. All I can think of to do is install a Wi-Fi driver from USB but I don't know the first thing about doing this.&lt;/p&gt;&#xA;" OwnerUserId="17508" LastEditorUserId="308" LastEditDate="2019-12-19T20:06:16.930" LastActivityDate="2020-01-29T04:53:23.870" Title="What can I do when Wi-Fi does not work after installing and I have no Ethernet port?" Tags="|boot|wifi|ethernet|hp|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18384" PostTypeId="2" ParentId="18383" CreationDate="2019-03-01T07:07:03.150" Score="0" Body="&lt;p&gt;Your laptop has one of the infamous broadcom wireless chips. You can try the answers &lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17355" LastActivityDate="2019-03-01T07:07:03.150" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18385" PostTypeId="1" AcceptedAnswerId="18401" CreationDate="2019-03-01T10:19:30.387" Score="2" ViewCount="564" Body="&lt;p&gt;I am trying to add a custom item to the pantheon-files context menu. When you click on a menu item in a folder, the terminal should start and process several commands, and thumbnail files should be created in the same folder at the output. I have next code in &lt;code&gt;/usr/share/contractor/thumbnail.contract&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Создать миниатюры изображений [500px]&#xA;Description=Make thumbnails&#xA;Icon=terminal&#xA;MimeType=inode;application/x-sh;application/x-executable;&#xA;Exec=io.elementary.terminal for file in *.jpg; do convert -scale 500 $file tn_$file ; done&#xA;Gettext-Domain=io.elementary.terminal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately it does not work( &#xA;Sorry for my english.&lt;/p&gt;&#xA;" OwnerUserId="17512" LastActivityDate="2019-03-02T10:56:31.903" Title="Elementary OS, add custom command in context menu pantheon-files" Tags="|release-juno|pantheon-files|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18389" PostTypeId="1" CreationDate="2019-03-01T15:58:16.967" Score="4" ViewCount="882" Body="&lt;p&gt;How can I develop an Extension for Code. I want to recreate atom's pigments package into Code.&lt;/p&gt;&#xA;" OwnerUserId="15005" LastEditorUserId="16827" LastEditDate="2019-04-16T00:03:53.150" LastActivityDate="2019-05-05T11:04:59.700" Title="How to develop extensions for Code?" Tags="|development|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18391" PostTypeId="1" CreationDate="2019-03-01T17:37:27.700" Score="1" ViewCount="37" Body="&lt;p&gt;I'm trying to triple boot my MacBook 15,1 using &lt;a href=&quot;https://www.innoq.com/en/blog/triple-booting-a-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these instructions&lt;/a&gt;. I have of course mac (latest) and windows booting but I'm failing to install latest Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I burned the iso to a usb stick. That boots fine and I can launch the installer. But the installer does not list the mac's SSD drive so I can't finish partitioning the empty space and install linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only disk the installer shows is the USB stick.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas how to solve this?&lt;/p&gt;&#xA;" OwnerUserId="17518" LastActivityDate="2019-03-01T17:37:27.700" Title="Installer not listing disks" Tags="|dual-boot|disk-management|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18392" PostTypeId="2" ParentId="16583" CreationDate="2019-03-01T18:32:09.360" Score="3" Body="&lt;p&gt;I had the same problem. I needed to change the schedule from &quot;Sunset to Sunrise&quot; to &quot;Manual&quot;. I tested to change the hours and it worked again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that was helpful.&lt;/p&gt;&#xA;" OwnerUserId="17521" LastActivityDate="2019-03-01T18:32:09.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18393" PostTypeId="1" CreationDate="2019-03-01T20:01:54.593" Score="1" ViewCount="31" Body="&lt;p&gt;Freshly installed juno. Freezes randomly and , stops working when i click display setting in system settings. Should power off by the physical button everytime , please help&lt;/p&gt;&#xA;" OwnerUserId="17522" LastActivityDate="2019-03-01T20:01:54.593" Title="Juno freezed randomly" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18394" PostTypeId="2" ParentId="17907" CreationDate="2019-03-01T22:23:48.353" Score="1" Body="&lt;p&gt;Given the silence let me respond to myself. To disable fstrim execute this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop fstrim.timer&#xA;sudo systemctl disable fstrim.timer&#xA;sudo systemctl stop fstrim.service&#xA;sudo systemctl disable fstrim.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17008" LastActivityDate="2019-03-01T22:23:48.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18395" PostTypeId="1" CreationDate="2019-03-02T01:41:26.063" Score="1" ViewCount="90" Body="&lt;p&gt;I use ElementaryOS on a chromebook. The keyboard top row has Xf86-like keys which are wrongly mapped as F keys by the hardware. Therefore I made a script to change the keymap at boot with Xmodmap. It works, but the keys are reset after seemingly random events. I suspect this is caused by the hotkey utility, which reload the layout for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make these changes permanent?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DQ4lC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DQ4lC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17525" LastActivityDate="2019-03-02T01:41:26.063" Title="Permanent custom keymap" Tags="|settings|keyboard-shortcuts|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18396" PostTypeId="2" ParentId="18374" CreationDate="2019-03-02T05:48:13.813" Score="1" Body="&lt;p&gt;Did you try the obvious things like disabling Secure boot on your BIOS (UEFI, I know)? or using &quot;nomodeset&quot; (as specified here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10000/elementary-os-wont-boot-past-live-cd-screen&quot;&gt;Elementary OS won&amp;#39;t boot past live CD screen&lt;/a&gt;) &lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-03-02T05:48:13.813" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18397" PostTypeId="2" ParentId="16560" CreationDate="2019-03-02T05:54:12.203" Score="1" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    sudo su&#xA;    su - -s /bin/bash lightdm&#xA;    gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;    dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that if you 'sudo' instead, it won't work properly. This fixed it on my XPS 15 9560 :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-03-02T05:54:12.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18398" PostTypeId="2" ParentId="18331" CreationDate="2019-03-02T07:24:27.637" Score="0" Body="&lt;p&gt;Install elementary tweaks. That should enable you to change current system fonts, independent of themes.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-03-02T07:24:27.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18400" PostTypeId="2" ParentId="18159" CreationDate="2019-03-02T09:46:26.153" Score="-1" Body="&lt;p&gt;A quick DuckDuckGo search got these results, I hope they help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://appuals.com/fix-unable-correct-problems-held-broken-packages/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appuals.com/fix-unable-correct-problems-held-broken-packages/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://omgfoss.com/how-to-fix-broken-packages-in-ubuntu-18-04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://omgfoss.com/how-to-fix-broken-packages-in-ubuntu-18-04-lts/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17527" LastActivityDate="2019-03-02T09:46:26.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18401" PostTypeId="2" ParentId="18385" CreationDate="2019-03-02T10:56:31.903" Score="3" Body="&lt;p&gt;Firstly, I would recommend putting custom contracts in &lt;code&gt;~/.local/share/contractor&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do not need terminal to open then this works:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Создать миниатюры изображений [500px]&#xA;Description=Make thumbnails&#xA;Icon=terminal&#xA;MimeType=inode;application/x-sh;application/x-executable;&#xA;Exec=sh -c 'cd %U; for file in *.jpg; do convert -scale 500 $file tn_$file ; done;'&#xA;Gettext-Domain=sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can get terminal to open as well by appending &lt;code&gt;io.elementary.terminal;&lt;/code&gt; to the shell command&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-03-02T10:56:31.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18402" PostTypeId="2" ParentId="18376" CreationDate="2019-03-02T12:18:54.563" Score="1" Body="&lt;p&gt;I'm afraid we broke that in the last Gala release when we tried to remove a lag / freeze when making screenshots (See: &lt;a href=&quot;https://github.com/elementary/gala/pull/460&quot; rel=&quot;nofollow noreferrer&quot;&gt;PR&lt;/a&gt;).&lt;br&gt;&#xA;We've solved the issue and it should be fixed with the next release of Gala. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Issue: &lt;a href=&quot;https://github.com/elementary/gala/issues/474&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/474&lt;/a&gt;&lt;br&gt;&#xA;Fix: &lt;a href=&quot;https://github.com/elementary/gala/pull/481&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/pull/481&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; A new version of Gala was released which should include the fix:&lt;br&gt;&#xA;Version: &lt;code&gt;0.3.2~r690+pkg45~ubuntu5.0.1&lt;/code&gt;&lt;br&gt;&#xA;On: 2019-03-05&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-03-09T08:08:08.327" LastActivityDate="2019-03-09T08:08:08.327" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18403" PostTypeId="1" AcceptedAnswerId="18563" CreationDate="2019-03-02T17:31:34.083" Score="0" ViewCount="373" Body="&lt;p&gt;Folks; using a bright background in elementary 5, I see a strange behaviour with the top panel background. In &lt;em&gt;some&lt;/em&gt; cases, with no window opened, the panel is completely transparent and the icons top-right seem right &quot;on the background&quot;. However, &quot;often&quot; (like ever third or fourth boot), the panel background will turn way opaque, see screenshot. I don't see a pattern in here and I don't know how to make the panel &lt;em&gt;always&lt;/em&gt; transparent in this setup whenever no window is opened. Any recommendations on that? Any idea what's wrong here?&#xA;TIA and all the best,&#xA;Kristian&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wP6vZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wP6vZ.png&quot; alt=&quot;opaque white panel&quot;&gt;&lt;/a&gt; -- this is not how I want it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SjQ9o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SjQ9o.png&quot; alt=&quot;transparent white panel&quot;&gt;&lt;/a&gt; -- this is how it should be but just occassionally is.&lt;/p&gt;&#xA;" OwnerUserId="15422" LastEditorUserId="15422" LastEditDate="2019-03-04T07:24:09.487" LastActivityDate="2019-03-22T11:48:49.593" Title="Transparent vs. white panel with light background" Tags="|desktop|themes|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2019-04-19T21:45:40.153" ContentLicense="CC BY-SA 4.0" />
  <row Id="18404" PostTypeId="1" CreationDate="2019-03-02T22:46:18.890" Score="0" ViewCount="3402" Body="&lt;p&gt;Sorry for the silly question, but where is the trash icon on Juno? How do i add it to the dock? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently delete things manually by going into the .local/share/trash. But it would be nice to use the icon directly from the desktop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&#xA;Ahn&lt;/p&gt;&#xA;" OwnerUserId="17534" LastEditorUserId="16827" LastEditDate="2019-03-03T07:23:01.647" LastActivityDate="2019-11-02T23:32:51.787" Title="Where is the trash icon?" Tags="|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18405" PostTypeId="1" CreationDate="2019-03-03T00:20:58.977" Score="1" ViewCount="154" Body="&lt;p&gt;When I use Linux Console (tty1-6) to login, I type my username then press Enter, then it auto return. It make me cannot login from tty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://vimeo.com/320996187&quot; rel=&quot;nofollow noreferrer&quot;&gt;video on Vimeo&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have check the log from &lt;code&gt;journalctl | grep login&lt;/code&gt;. The log file on &lt;a href=&quot;https://gist.github.com/lancatlin/59eb5dc15de5b53657a894b1bb8298c9&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gist&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I meet this problem not only on my laptop but also on my PC, but it's fine on Arch Linux on my laptop, so I think it's not Linux kernal's problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My hardware information is also put on &lt;a href=&quot;https://gist.github.com/lancatlin/59eb5dc15de5b53657a894b1bb8298c9&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gist&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help.&lt;/p&gt;&#xA;" OwnerUserId="17138" LastActivityDate="2019-03-03T00:20:58.977" Title="Cannot login from TTY: Auto \r when TTY login" Tags="|greeter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18406" PostTypeId="2" ParentId="18404" CreationDate="2019-03-03T06:36:29.803" Score="4" Body="&lt;p&gt;You have two options:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Files, there is a trash icon on the left pane which you can empty with the right-click&lt;/li&gt;&#xA;&lt;li&gt;You can also ctrl + right-click on the Plank and go to Preferences -&gt; Docklets where you can drag&amp;amp;drop Trash icon on Plank and there, with the right-click, do even more &quot;trashy&quot; things ;-)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user511" LastActivityDate="2019-03-03T06:36:29.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18408" PostTypeId="1" CreationDate="2019-03-03T20:25:44.027" Score="3" ViewCount="42" Body="&lt;p&gt;I installed elementary OS on my EliteBook from a USB stick, and I'm not able to see my DVD RW drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you please help me? I tried listing &lt;code&gt;ls /dev&lt;/code&gt; but nothing is visible... :-/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="17541" LastEditorUserId="26" LastEditDate="2019-03-07T00:11:20.107" LastActivityDate="2019-03-07T00:11:20.107" Title="DVR RW drive not recognized on my laptop" Tags="|dvd|" AnswerCount="0" CommentCount="2" ClosedDate="2020-03-12T07:09:26.377" ContentLicense="CC BY-SA 4.0" />
  <row Id="18409" PostTypeId="1" CreationDate="2019-03-04T03:37:31.293" Score="1" ViewCount="22" Body="&lt;p&gt;Files file manager tool bar menu Gone .. &quot;file edit view&quot; disabled&#xA;by accident &#xA;- How do I get it to show again? &lt;/p&gt;&#xA;" OwnerUserId="17542" LastActivityDate="2019-03-04T03:37:31.293" Title="Files file manager tool bar menu Gone &quot;file edit view&quot; disabled" Tags="|menu|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18410" PostTypeId="2" ParentId="18372" CreationDate="2019-03-04T05:00:08.997" Score="1" Body="&lt;p&gt;I think you will find your music in the music file and from there you can move it to the music folder.If you go to files-music your music will be there.&#xA;If you open the music app and import music from music file that should work for you.&#xA;Hope this helps.&#xA;Sorry you are having trouble&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-03-04T05:00:08.997" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18411" PostTypeId="2" ParentId="18374" CreationDate="2019-03-04T05:03:43.780" Score="0" Body="&lt;p&gt;Abid Uzair, all Linux distros have problems with Nvidia drivers, even pop!os you need to download the distro made for Nvidia. &lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-03-04T05:03:43.780" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18413" PostTypeId="2" ParentId="18319" CreationDate="2019-03-04T12:00:59.627" Score="1" Body="&lt;p&gt;Terminal öffnen und folgendes eingeben:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt search switchboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;und danach alles, was aufgelistet wird mit:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install &quot;Paketname&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;installieren. Der Paketname ist jeweils fett und farbig.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Translation:&lt;/strong&gt; Open the terminal and enter the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt search switchboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then everything listed with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install &quot;package name&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to install. The package name is bold and colored.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2Y5rT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Y5rT.png&quot; alt=&quot;Terminal-Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user17545" LastEditorUserId="16827" LastEditDate="2019-03-04T13:08:06.070" LastActivityDate="2019-03-04T13:08:06.070" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18414" PostTypeId="2" ParentId="18318" CreationDate="2019-03-04T12:28:11.553" Score="0" Body="&lt;p&gt;Try it without telling the Terminal to execute a command in Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2WKD5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2WKD5.png&quot; alt=&quot;custom command&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user17545" LastActivityDate="2019-03-04T12:28:11.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18418" PostTypeId="2" ParentId="16467" CreationDate="2019-03-05T09:18:59.353" Score="0" Body="&lt;p&gt;I finally found out why it kept failing: somehow the gtk-enabe-primary-paste option was disabled.  Re-enabling it finally solved it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;org.gnome.desktop.interface.gtk-enable-primary-paste&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other one to check is the natural copy paste option&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;io.elementary.terminal.settings.natural-copy-paste&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14967" LastActivityDate="2019-03-05T09:18:59.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18419" PostTypeId="2" ParentId="7686" CreationDate="2019-03-05T13:30:44.423" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I just posted a solution for another question that might help you for this as well on:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Way to enable vertical two-finger scrolling, but not horizontal?&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;I removed the libinput drivers for the touchpad and installed the synaptic drivers instead I did:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo apt-get remove xserver-xorg-input-libinput libinput-tools&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;This removes libinput touchpad driver. Then install synaptics:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-synaptics&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Then restart.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;This also allowed me to change Two Finger Horizontal scrolling and add palm detection (see above link) and also made the touchpad less sensitive.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;I have not tested this extensively, but seems to work so far, use at your own risk. &gt;You could always remove the synaptics packages and reinstall the libinput ones if needed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Jay&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It works for me! Thx!!&lt;/p&gt;&#xA;" OwnerUserId="14851" LastActivityDate="2019-03-05T13:30:44.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18421" PostTypeId="2" ParentId="18371" CreationDate="2019-03-05T18:35:32.033" Score="1" Body="&lt;p&gt;Alienware laptops generally have &quot;different&quot; spec sound chips (as well as all sorts of other &quot;gaming&quot; optimisations) and so it is likely that the default sound drivers might not work. You might want to look at the drivers available and see if there is something that might work. A quick on-line search throws up this lot: &lt;a href=&quot;https://www.dell.com/support/home/us/en/04/product-support/product/alienware-m17x-r4/drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dell.com/support/home/us/en/04/product-support/product/alienware-m17x-r4/drivers&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2019-03-05T18:35:32.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18422" PostTypeId="1" CreationDate="2019-03-05T22:12:12.917" Score="1" ViewCount="123" Body="&lt;p&gt;I'm struggling since a while with my NIC &quot;Broadcom Limited NetLink BCM57780 Gigabit Ethernet PCIe&quot; which can not be connected to any device using ethernet. The link is always down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to change speed using ethtool to 10 / 100 / 1000 Mb/s and change autoneg but nothing changed the link always appears to be down and I can't ping anyone but myself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried to download driver on this : &lt;a href=&quot;https://download.cnet.com/Broadcom-LAN-Driver-8-27-1-0-zip/3000-2112_4-162569.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.cnet.com/Broadcom-LAN-Driver-8-27-1-0-zip/3000-2112_4-162569.html&lt;/a&gt; seems like there's a Linux driver inside but I never managed to compile it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I Tried to set an IP and bring interface up manually, it went up through UI but still appeared down through ethtool and via &quot;dmesg | grep tg3&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm quite new on Linux, I think this is a driver problem here but I can't find any for my NCI...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Edit] :&#xA;According to &lt;a href=&quot;https://unix.stackexchange.com/questions/118850/no-wired-ethernet-connection&quot;&gt;https://unix.stackexchange.com/questions/118850/no-wired-ethernet-connection&lt;/a&gt; I have the following output when using lshw:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo lshw -c network -sanitize:&#xA;*-network&#xA;   description: Ethernet interface&#xA;   produit: NetLink BCM57780 Gigabit Ethernet PCIe&#xA;   fabriquant: Broadcom Inc. and subsidiaries&#xA;   identifiant matériel: 0&#xA;   information bus: pci@0000:0e:00.0&#xA;   nom logique: enp14s0&#xA;   version: 01&#xA;   numéro de série: [REMOVED]&#xA;   taille: 100Mbit/s&#xA;   capacité: 1Gbit/s&#xA;   bits: 64 bits&#xA;   horloge: 33MHz&#xA;   fonctionnalités: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;   configuration: autonegotiation=off broadcast=yes driver=tg3 driverversion=3.137 duplex=full firmware=sb latency=0 link=no multicast=yes port=MII speed=100Mbit/s&#xA;   ressources: irq:36 mémoire:d3400000-d340ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems like this is enough to say that there is an actual driver (tg3 v3.137) attached to my Ethernet device and that's at least getting detected by the kernel during boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thus, it doesn't seem to be a missing driver problem. I'm quite lost now...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone already solved this kind of problem with this kind of NCI ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other information :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Linux version : 4.15.0-45-generic ;&lt;/li&gt;&#xA;&lt;li&gt;My PC is an Aspire-V3-772 ;&lt;/li&gt;&#xA;&lt;li&gt;I used to be on Windows 10 and never had any problem with my NCI, but it seems like it never worked on Linux for me.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17558" LastEditorUserId="17558" LastEditDate="2019-03-06T17:05:29.157" LastActivityDate="2019-05-03T22:13:20.003" Title="BCM57780 ethernet link is always down" Tags="|system|networking|drivers|ethernet|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18424" PostTypeId="1" AcceptedAnswerId="18436" CreationDate="2019-03-06T07:17:47.177" Score="2" ViewCount="2796" Body="&lt;p&gt;I have Asus laptop with 24GB SSD and 1TB HDD and the main idea was to use all SSD space for &lt;code&gt;/&lt;/code&gt; and 10GB HDD space for &lt;code&gt;Swap&lt;/code&gt; and rest of the HDD space for &lt;code&gt;/home&lt;/code&gt; partition. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Going through the installation when asked about installation type I chose &lt;em&gt;'Something else'&lt;/em&gt; and managed partitions on my own following the main idea and placing &lt;code&gt;Swap&lt;/code&gt; and &lt;code&gt;/home&lt;/code&gt; partitions as logical and &lt;code&gt;/&lt;/code&gt; as primary. All HDD partitions were on &lt;code&gt;/dev/sda&lt;/code&gt; and SSD partition was on &lt;code&gt;/dev/sdb&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In &lt;em&gt;'Device for bootloader installation'&lt;/em&gt; dropdown I chose &lt;code&gt;/dev/sdb&lt;/code&gt; as there was my &lt;code&gt;/&lt;/code&gt; partition and went through with the installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All went well until grub tried to be installed - I got message: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Executing 'grub-install /dev/sdb' failed. Fatal Error.&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I am not sure what could have gone sideways and I would appreciate the help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also it got me thinking do I even need grub bootloader if I am planning on having &lt;strong&gt;only&lt;/strong&gt; Elementary OS installed on my laptop?&lt;/p&gt;&#xA;" OwnerUserId="17560" LastActivityDate="2019-03-07T08:35:52.553" Title="Elementary OS 5.0 Juno grub installation error [Single Boot]" Tags="|system-installation|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18426" PostTypeId="2" ParentId="18012" CreationDate="2019-03-06T15:30:35.160" Score="1" Body="&lt;p&gt;In the terminal, you can use the following command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings background '#090921111a1b'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Hash #090921111a1b is broken down to #RRRRGGGGBBBB in base16 0-f&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you have what color you like, place the command in your &lt;code&gt;.bashrc&lt;/code&gt; file.&lt;/p&gt;&#xA;" OwnerUserId="17562" LastActivityDate="2019-03-06T15:30:35.160" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18429" PostTypeId="2" ParentId="14972" CreationDate="2019-03-06T18:30:58.080" Score="0" Body="&lt;p&gt;just remove ol packgae list and upgrade again, or run this shel command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /etc/apt/sources.list.d/*&#xA;sudo rm -rf /var/lib/apt/lists/*&#xA;sudo apt-get upgrade&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17567" LastActivityDate="2019-03-06T18:30:58.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18430" PostTypeId="1" CreationDate="2019-03-06T20:08:20.140" Score="0" ViewCount="261" Body="&lt;p&gt;I want my wingpanel to have the colour black all the time.&#xA;When an application is open in full screen, then it is black.&#xA;When my wallpaper is visible, it goes white.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where can I change this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried to edit the app.css of the Theme I am currently using to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel.color-light.translucent {&#xA;background-color: alpha(#fff, 0.85);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But then the text stays also black and I cant read anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even when I don't use a custom theme the wingpanel turns white when i see my wallpaper.&lt;/p&gt;&#xA;" OwnerUserId="17570" LastActivityDate="2019-12-08T01:09:18.720" Title="Wingpanel static colour" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18431" PostTypeId="1" CreationDate="2019-03-06T20:29:49.643" Score="0" ViewCount="503" Body="&lt;p&gt;I'm trying to install elementary OS on a Lenovo IdeaPad 330S&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did follow the steps for Ubuntu: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Removing the fast boot option from windows 10  &lt;/li&gt;&#xA;&lt;li&gt;Disable the boot secure&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;then when booting from the USB and trying the option to Run or Install it gets stuck in a black screen.&#xA;I try changing the parameter [quiet splash] to [nomodeset] but nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm really lost here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your time, best regards.&lt;/p&gt;&#xA;" OwnerUserId="17568" LastEditorUserId="16827" LastEditDate="2019-05-06T16:37:20.977" LastActivityDate="2024-01-11T05:02:30.283" Title="Trying elementary OS without installing options get stuck in black screen dual boot Win 10" Tags="|system-installation|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18432" PostTypeId="2" ParentId="2227" CreationDate="2019-03-06T20:34:02.177" Score="0" Body="&lt;p&gt;Perhaps &lt;a href=&quot;https://github.com/elementary/gala/blob/8e142b9ef967d857c4cf311eaa986b4768432169/plugins/template/README&quot; rel=&quot;nofollow noreferrer&quot;&gt;gala/plugins/template/README&lt;/a&gt; will help you out. Unfortunately I can't currently give you a better answer than that because I'm trying myself to figure out what the content of that file actually means. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I remember reading a text about how Gala loads plugins, but can't find it at the moment. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I have understood that for the plugin to compile its directory needs to be added to the build.meson file (&lt;code&gt;subdir('plugins/&amp;lt;plugin directory&amp;gt;')&lt;/code&gt;). &lt;/p&gt;&#xA;" OwnerUserId="17569" LastEditorUserId="17569" LastEditDate="2019-03-06T20:55:39.037" LastActivityDate="2019-03-06T20:55:39.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18433" PostTypeId="1" CreationDate="2019-03-06T20:56:56.550" Score="0" ViewCount="234" Body="&lt;p&gt;Marking in color of files and folders works before updating (ctrl+R). After updating color of the file disappears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pantheon-files_4.1.5+r3347+pkg78~ubuntu5.0.1_amd64&lt;/p&gt;&#xA;" OwnerUserId="17571" LastActivityDate="2024-03-10T21:01:25.160" Title="Pantheon files. Color of files and folders does not work (Juno)" Tags="|pantheon-files|release-juno|color|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18436" PostTypeId="2" ParentId="18424" CreationDate="2019-03-07T08:35:52.553" Score="1" Body="&lt;p&gt;[UPDATE]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to fix the problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem was in a single boot. When you have Windows installed and are trying to have dual boot, as far as I understand, you do not ran into problem like this because Windows creates boot partition automatically, but when you install single boot Linux you have to do this on your own.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got it to work by splitting SSD space into two partitions: EFI partition that takes 200MB, and the rest of the space for ext4 &lt;code&gt;/&lt;/code&gt; partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For &lt;em&gt;Device for bootloader installation&lt;/em&gt; I chose &lt;code&gt;/dev/sdb1&lt;/code&gt; which is my EFI partition. Then I started the installation and everything worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="17560" LastActivityDate="2019-03-07T08:35:52.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18437" PostTypeId="2" ParentId="18433" CreationDate="2019-03-07T10:01:10.113" Score="0" Body="&lt;p&gt;This looks like a duplicate of this issue: &lt;a href=&quot;https://github.com/elementary/files/issues/892&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/892&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was fixed in the master branch a couple of weeks ago so it should be fixed in the next release.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-03-07T10:01:10.113" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18438" PostTypeId="1" CreationDate="2019-03-07T11:07:45.300" Score="0" ViewCount="568" Body="&lt;p&gt;Has anyone encountered the problem where clicking network settings from the applet just shows the System settings window? I can't access wireless or hotspot settings. &lt;a href=&quot;https://i.stack.imgur.com/WZ75B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WZ75B.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17575" LastActivityDate="2023-12-19T13:03:25.497" Title="Wireless and Internet settings disappeared from system settings" Tags="|settings|internet|release-juno|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18441" PostTypeId="2" ParentId="18431" CreationDate="2019-03-08T06:50:04.743" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;Disable secure boot in bios&lt;/li&gt;&#xA;&lt;li&gt;When creating bootable USB use Rufus and GPT partion and Uefi mode in bios&#xA;Now it will work&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17580" LastActivityDate="2019-03-08T06:50:04.743" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18443" PostTypeId="2" ParentId="17287" CreationDate="2019-03-08T14:25:11.247" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.npmjs.com/resolving-eacces-permissions-errors-when-installing-packages-globally&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Back up your computer.&#xA;On the command line, in your home directory, create a directory for global installations:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; mkdir ~/.npm-global&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Configure npm to use the new directory path:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; npm config set prefix '~/.npm-global'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In your preferred text editor, open or create a ~/.profile file and add this line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; export PATH=~/.npm-global/bin:$PATH&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On the command line, update your system variables:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;source ~/.profile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To test your new configuration, install a package globally without using sudo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;npm install -g jshint&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17585" LastEditorUserId="26" LastEditDate="2019-03-10T20:10:20.013" LastActivityDate="2019-03-10T20:10:20.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18445" PostTypeId="1" CreationDate="2019-03-08T15:02:46.870" Score="0" ViewCount="178" Body="&lt;p&gt;Installed elementary OS Juno on a Lenovo ideapad S130-11IGM (along with windows 10). WLAN can not be activated. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to install Intel's microcode for my WLAN board manually (no other internet access). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The relevant microcode is available now dezipped on an USB drive as&#xA;&lt;code&gt;iwlwifi-7265-14.ucode&lt;/code&gt; and &lt;code&gt;iwlwifi-7265D-14.ucode&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can a Linux beginner install that code in Elementary OS? Direct access to the directory &lt;code&gt;/lib/firmware&lt;/code&gt; is blocked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="17586" LastEditorUserId="16827" LastEditDate="2019-05-06T16:38:45.063" LastActivityDate="2020-06-10T18:55:22.460" Title="How can Intel Microcode be installed manually in elementary OS?" Tags="|software-installation|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18449" PostTypeId="2" ParentId="16037" CreationDate="2019-03-09T03:46:08.077" Score="0" Body="&lt;p&gt;What worked for me was disabling the touchpad&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, find the touchpad ID with the command:&#xA;&lt;code&gt;xinput&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case it was &quot;12&quot;, then disable it with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xinput set-prop 12 &quot;Device Enabled&quot; 0&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13833" LastActivityDate="2019-03-09T03:46:08.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18453" PostTypeId="1" AcceptedAnswerId="18473" CreationDate="2019-03-10T09:40:25.873" Score="0" ViewCount="1321" Body="&lt;p&gt;I installed Libre Office 6.2, then it would not launch (the icon appeared in the dock, then disappeared a few seconds later). I then reinstalled Libre Office 6.1 and that works fine, but I can't see how to remove 6.2. The sudo apt remove libreoffice 6.2 does not work, there is no right-click to uninstall in the app list. Any idea? &#xA;Thanks!&#xA;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="16827" LastEditDate="2019-04-16T13:15:39.607" LastActivityDate="2019-04-19T16:38:33.090" Title="How to uninstall Libre Office 6.2?" Tags="|software-installation|apps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18454" PostTypeId="1" AcceptedAnswerId="18471" CreationDate="2019-03-10T10:28:35.170" Score="0" ViewCount="21" Body="&lt;p&gt;I might have destroyed files inside /usr/share/scripts but I assume that this folder is empty after an installation. Is that correct?&lt;/p&gt;&#xA;" OwnerUserId="16853" LastActivityDate="2019-03-12T00:21:52.243" Title="Are there any files inside /usr/share/scripts after an elementary installation?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18455" PostTypeId="1" CreationDate="2019-03-10T12:26:49.540" Score="0" ViewCount="2601" Body="&lt;p&gt;I have some pictures in my HUAWAY P 20 Lite. The Android version is 8.0. When connected through usb my Elementary 5.0 installation seems to notice the phone. But neither the Kdeconnect Indicator nor the file manager does not see the picture-files so I could download them to the pc :mad:&lt;/p&gt;&#xA;" OwnerUserId="17598" LastActivityDate="2019-04-14T03:12:58.997" Title="How to connect my Android phone? KDECONNECT?" Tags="|applications|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18456" PostTypeId="1" CreationDate="2019-03-10T16:43:02.690" Score="1" ViewCount="800" Body="&lt;p&gt;I have a 32&quot; 4k screen that is recognized as a 27&quot; screen and my cursor is huge.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to adjust the cursor size using the DCONF editor no changes are actually made to the cursor size, even after a reboot.  The same is true for adjusting the cursor theme using elementary tweaks.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also found my settings for setting suspend time to &quot;never&quot; did not work, which led me to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16519/elementary-os-ignoring-suspend-disable&quot;&gt;this solution.&lt;/a&gt;  Could the same thing be happening with cursor settings?  I need to change the cursor size and theme for the user &quot;lightdm&quot;, not my user?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a bit new to Linux, so if anyone knows how to change the cursor size for &quot;lightdm&quot; please do share the commands that would need to be entered in terminal to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS 5.0 Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="17587" LastActivityDate="2019-11-03T15:43:57.557" Title="Mouse cursor size and theme not adjustable" Tags="|release-juno|mouse|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18457" PostTypeId="1" CreationDate="2019-03-10T17:13:10.363" Score="0" ViewCount="216" Body="&lt;p&gt;I just start using elementary os 5.0 juno today and after installiation, system showed update notifications. After 13 programs updated, i opened a video and there is no display but video continued and there is sound. I tried different programs after that, same result. What should i do now? I can play videos from youtube. But i can not play files .mkv .mp4 etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could it be a problem of Nvidia video card?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="17601" LastActivityDate="2024-03-14T05:05:55.700" Title="5.0 Juno - There is no display on videos" Tags="|display|graphic-drivers|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18458" PostTypeId="2" ParentId="18457" CreationDate="2019-03-10T17:22:30.357" Score="0" Body="&lt;p&gt;When i am looking for nvidia x server setting, i saw two GPU modes on PRIME Profiles: NVIDIA (Perfomance mode) and Intel (Power Saving Mode). I choose Intel Power Saving Mode and loged off. After i log in back, videos were working okay. &lt;/p&gt;&#xA;" OwnerUserId="17601" LastActivityDate="2019-03-10T17:22:30.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18460" PostTypeId="1" AcceptedAnswerId="18463" CreationDate="2019-03-10T21:06:48.987" Score="2" ViewCount="1480" Body="&lt;p&gt;I've tried installing Elementary OS with a custom partition scheme, using both LVM and Luks, but after the installation I can't log into the system: the kernel boots but cannot mount the encrypted root partition. It fails with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: Failed to connect to lvmetad. Falling back to device scanning.&#xA;Volume group &quot;elementary-vg&quot; not found&#xA;Cannot process volume group elementary-vg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is the way I performed the custom partition scheme. I booted Elementary OS from an USB pen, launched &lt;code&gt;gparted&lt;/code&gt; and created the following partitions:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1   efi         fat32     512MB (boot, esp)&#xA;/dev/sda2   boot        ext4      732MB&#xA;/dev/sda3   not mapped          10240MB &#xA;/dev/sda4   luks        remaining space&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then with a command line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# cryptsetup luksFormat --hash=sha256 --key-size=512 --cipher=aes-xts-plain64 --verify-passphrase /dev/sda4&#xA;# cryptsetup luksOpen /dev/sda4 elementary&#xA;# pvcreate /dev/mapper/elementary&#xA;# vgcreate elementary-vg /dev/mapper/elementary&#xA;# lvcreate -n root -L 32G elementary-vg&#xA;# lvcreate -n swap_1 -L 12G elementary-vg&#xA;# lvcreate -n users -l +100%FREE elementary-vg&#xA;# vgscan&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I launched the installer and used the &quot;Something else&quot; option for the disk. I mapped the existing partitions as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/dev/sda1                            efi&#xA;/dev/sda2                            ext4    /boot           format&#xA;/dev/mapper/elementary-vg--root      ext4    /               format&#xA;/dev/mapper/elementary-vg--swap      swap    &#xA;/dev/mapper/elementary-vg--users     ext4    /media/users    format&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The installation correctly completes, as I said, but it fails at the next reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I even logged in with the USB key, ran the usual stuff for chrooting into the installation and performed and &lt;code&gt;apt update; apt dist-upgrade&lt;/code&gt;. It went fine, updated the initramfs and grub, but didn't fix the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Luks setup seems fine, in fact if I enter the &lt;code&gt;grub&lt;/code&gt; command line I can manually mount the encrypted root:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub&amp;gt; insmod luks&#xA;grub&amp;gt; cryptomount hd0,gpt4&#xA;grub&amp;gt; insmod lvm&#xA;grub&amp;gt; ls&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and I can see the logical volumes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please suggest what I should do to fix the existing installation. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="17607" LastActivityDate="2020-04-04T02:00:45.237" Title="Elementary OS with custom partitions - lvm, luks - doesn't ask for password at boot" Tags="|boot|grub|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18461" PostTypeId="1" CreationDate="2019-03-10T21:21:29.233" Score="1" ViewCount="714" Body="&lt;p&gt;I have a two-in-one laptop (Dell Inspiron 7348) with a touchscreen and a touchpad running elementary OS 5.0 Juno and the pinch-to-zoom gesture works ok on the touch screen (but still not very fluent). &#xA;But if I do the same on my touchpad, nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have now installed libinput and libinput-gestures and tried it that way but its not very satisfying because it is only capable of triggering the zoom key and thus zooming once per pinch and not corresponding to the pinch. I only found out that it works on the screen after I installed libinput-gestures and have now deduced that there must be a way to get that working pinch-to-zoom feature from the touchscreen to also work on the touchsceen.&#xA;I am sorry if this is a dumb question, Juno is my first Linux ever.&lt;/p&gt;&#xA;" OwnerUserId="17608" LastActivityDate="2019-03-10T21:21:29.233" Title="Pinch-to-Zoom multitouch gesture" Tags="|release-juno|settings|touchpad|input|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18463" PostTypeId="2" ParentId="18460" CreationDate="2019-03-10T22:14:29.823" Score="1" Body="&lt;p&gt;Ok, it seems I've found the solution, but I'd like to see some confirmation because all this stuff seems complex and I see that has been changed multiple times with recent updates of Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understood that a file &lt;code&gt;/etc/crypttab&lt;/code&gt; must exist and enumerate the devices to be unlocked at boot. Giving a custom partition scheme, the Elementary installer didn't create it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I booted again from the USB key and chrooted into the system. For the convenience of other users with similar problems I'm providing the steps:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# cryptsetup open /dev/sda4 elementary&#xA;# vgscan&#xA;# vgchange -ay&#xA;# lvscan&#xA;# mkdir /mnt/system&#xA;# mount /dev/mapper/elementary--vg-root /mnt/system/&#xA;# mount /dev/sda2 /mnt/system/boot/                        &#xA;# mount -o bind /dev/ /mnt/system/dev/&#xA;# mount -o bind /proc/ /mnt/system/proc/&#xA;# mount -o bind /sys/ /mnt/system/sys/&#xA;# chroot /mnt/system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I got the luks UUID of the device:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# cryptsetup luksDump /dev/sda4 | grep UUID&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then created &lt;code&gt;/etc/crypttab&lt;/code&gt; with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary  UUID=&amp;lt;uuid&amp;gt; none    luks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At last I ran:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# initramfs -u -k all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and at this point the system booted fine, asking for the password and mounting the encrypted device at boot.&lt;/p&gt;&#xA;" OwnerUserId="17607" LastActivityDate="2019-03-10T22:14:29.823" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18465" PostTypeId="1" CreationDate="2019-03-10T23:54:01.740" Score="0" ViewCount="385" Body="&lt;p&gt;the process bar from copy files gets stuck even when its done or it gets stuck mid-way through a process. Is there a way to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I tried using Ctrl Alt F1 to try to close this process but i actually don't know how to effectly ue Ctrl Alt F1. Can someone please comment on this?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="17611" LastActivityDate="2019-04-10T02:02:10.393" Title="stuck copying files from folder to folder or usb drive" Tags="|release-juno|usb-drive|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18466" PostTypeId="2" ParentId="18465" CreationDate="2019-03-11T01:01:10.257" Score="1" Body="&lt;p&gt;Felinux - welcome to the Elementary OS forums!&lt;br&gt;&#xA;&lt;br&gt;&#xA;Let's start off with a few basics to try to diagnose your problem.&lt;br&gt;&#xA;&lt;br&gt;&#xA;1. Please go to Applications -&gt; Terminal (or Win+T)&lt;br&gt;&#xA;2. Insert a flash disk into any available USB port.&lt;br&gt;&#xA;3. Type: &lt;code&gt;lsblk&lt;/code&gt;&lt;br&gt;&#xA;4. In my case, I can &quot;see&quot; the drive at [/dev/]sda1 and the mount point is at /media/&lt;em&gt;userID&lt;/em&gt;/&lt;em&gt;driveName&lt;/em&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; where &lt;em&gt;userID&lt;/em&gt; is replaced with your eOS username.&lt;br&gt;&#xA;Also, &lt;em&gt;driveName&lt;/em&gt; is replaced with the name of the flash drive.&lt;br&gt;&#xA;5. &lt;strong&gt;GIVEN:&lt;/strong&gt; I have a bookmarks.json backup file in my Documents folder.&lt;br&gt;&#xA;6. Type: &lt;code&gt;cp ~/Documents/bookmarks.json /media/userID/driveName/&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; You will have to replace bookmarks.json with a file in &lt;strong&gt;your&lt;/strong&gt; Documents folder.  Remember to replace &lt;em&gt;userID&lt;/em&gt; and &lt;em&gt;driveName&lt;/em&gt; as you did with step #4.&lt;br&gt;&#xA;7. If the file copied without errors (which would appear in Terminal) then you can issue the following command.&lt;br&gt;&#xA;Type: &lt;code&gt;ls -al /media/userID/driveName/&lt;/code&gt;&lt;br&gt;&#xA;8. You should see a listing of &lt;strong&gt;all&lt;/strong&gt; of the files, including the file you just copied, on your flash drive.&lt;br&gt;&#xA;9. Press Cont+D to exit the terminal.&lt;br&gt;&#xA;&lt;br&gt;&#xA;If this process works, then we can examine which file(s) you are attempting to copy and why Elementary OS GUI is experiencing difficulties in trying to copy your files to your destination.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-03-11T01:01:10.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18467" PostTypeId="2" ParentId="18455" CreationDate="2019-03-11T11:56:10.110" Score="1" Body="&lt;p&gt;Depending upon your Android configuration on the Huawei device, as soon as you connect it via USB, the phone should prompt you with a question how to connect (something like &quot;USB debugging&quot;, &quot;file transfer&quot; or &quot;charge only&quot;). Be sure to choose &quot;file transfer&quot; in this case, and you should be seeing the phone under &quot;Devices&quot; in the left bar of the file manager. Give it a try and get back in case this doesn't work. :)&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-03-11T11:56:10.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18468" PostTypeId="2" ParentId="18455" CreationDate="2019-03-11T14:28:02.453" Score="0" Body="&lt;p&gt;Thank you very much for your answer. It went as you described:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;the phone should prompt you with a question how to connect (something like &quot;USB debugging&quot;, &quot;file transfer&quot; or &quot;charge only&quot;). Be sure to choose &quot;file transfer&quot; in this case, and you should be seeing the phone under &quot;Devices&quot; in the left bar of the file manager.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I can see a lot of stuff in the huawaylite but can not find just the pictures. Perhaps the best method for me would be to use Gmail to send them to myself and then download to my pc. Or use Dropbox or an other cloud :}&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the Softwarecenter I only found Kdeconnect. Any other program to try?&lt;/p&gt;&#xA;" OwnerUserId="17598" LastActivityDate="2019-03-11T14:28:02.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18469" PostTypeId="2" ParentId="18456" CreationDate="2019-03-11T18:16:08.683" Score="1" Body="&lt;p&gt;Derek, welcome to the Elementary OS forums!&lt;br&gt;&#xA;&lt;br&gt;&#xA;I had a similar experience with Elementary OS - Juno and a Razer Blade Stealth which is equipped with a 13.3-inch QHD display.  The resolution comes in at a whopping (3200 x 1800).  In my case, everything was super tiny.&lt;br&gt;&#xA;&lt;br&gt;&#xA;So I used &lt;em&gt;System Settings -&gt; Universal Access -&gt; Display&lt;/em&gt; to change my display text size.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Then, I went to dconf Editor (installed through AppCenter) and followed this path: &lt;em&gt;org &gt; gnome &gt; desktop &gt; interface &gt; cursor-size&lt;/em&gt;&lt;br&gt;&#xA;I switched off use default value, and doubled my cursor size in the bottom field labeled Custom value.  I saved my selection by clicking the check mark in the lower right hand side of the window.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Then I &quot;waved&quot; the cursor around, tried launching LibreOffice, there was no change with my cursor.  So I tried a reboot, still nothing, the cursor stubbornly remained the same [small] size.&lt;br&gt;&#xA;&lt;br&gt;&#xA;After that experience, I turned to Gnome Tweaks (available through AppCenter).  I noticed that if I went to &lt;em&gt;Appearance &gt; Themes &gt; Cursor&lt;/em&gt; and changed it from Elementary to Adwaita (default). My cursor suddenly increased in size. However, and this is where it gets &lt;em&gt;interesting&lt;/em&gt;. Wherever the Pantheon desktop environment holds sway, my cursor will &lt;strong&gt;revert&lt;/strong&gt; back to the same small size.  For example, this would include the Dock, Desktop, Window headers, etc...  So, I can not claim this is a 100% fix, but this irregularity may become something that is patched in a future update.&lt;br&gt;&#xA;&lt;br&gt;&#xA;I hope that helps!  Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-03-11T18:16:08.683" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18470" PostTypeId="2" ParentId="18455" CreationDate="2019-03-11T19:12:43.627" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I can see a lot of stuff in the huawaylite but can not find just the pictures. Perhaps the best method for me would be to use Gmail to send them to myself and then download to my pc. Or use Dropbox or an other cloud :}&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;What exactly did you see after connecting the phone? &lt;em&gt;Usually&lt;/em&gt; you should be able to browser the devices internal folder structure and find your pictures in some place like &quot;Pictures&quot; or &quot;DCIM&quot;, but it might require a bit of browsing or getting used to the folder structure. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apart from that:&#xA;* Yes, of course syncinc images using Google Drive or Dropbox would be an option. At least for Dropbox there should be a Linux sync client as well. As an alternative (if privacy matters to you), you might want to use a Nextcloud or something like this all along with the appropriate (Android, Linux) apps.&#xA;* You could go for a tool such as WiFi File Transfer (&lt;a href=&quot;https://play.google.com/store/apps/details?id=com.smarterdroid.wififiletransfer&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://play.google.com/store/apps/details?id=com.smarterdroid.wififiletransfer&lt;/a&gt;) on Android. This essentially allows for starting a (web) server on your Android device and gives you an easy chance to download files (one or many) using your web browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But unless Huawei completely messed it up, you really shouldn't need to use these. Maybe, as an option, after connecting you might want to use the elementary file managers &quot;find&quot; facility to locate an image file by name, on the device, if they are hard to find.&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-03-11T19:12:43.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18471" PostTypeId="2" ParentId="18454" CreationDate="2019-03-12T00:21:52.243" Score="2" Body="&lt;p&gt;On my recent Elementary OS 5.0 install, there is no /usr/share/scripts. I'd suggest looking into what package provides that folder to attempt to determine if anything is missing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -S /usr/share/scripts&#xA;dpkg --verify $packagename&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source &lt;a href=&quot;https://serverfault.com/a/627436/502732&quot;&gt;https://serverfault.com/a/627436/502732&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt; -V, --verify [package-name...]&#xA;      Verifies  the integrity of package-name or all packages if omit‐&#xA;      ted, by comparing information from the installed paths with  the&#xA;      database metadata.&#xA;&#xA;      The output format is selectable with the --verify-format option,&#xA;      which by default uses the rpm format, but that might  change  in&#xA;      the  future,  and  as  such programs parsing this command output&#xA;      should be explicit about the format they expect.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17612" LastActivityDate="2019-03-12T00:21:52.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18472" PostTypeId="2" ParentId="18445" CreationDate="2019-03-12T00:36:16.027" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;How can a Linux beginner install that code in Elementary OS? Direct access to the directory /lib/firmware is blocked. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Likely, you mean, you'll need root access as that folder is protected. Read sudo_root manpage to learn more about how to gain root access to move files into protected folders.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   By  default, the password for the user &quot;root&quot; (the system administrator) is locked. &#xA;   This means you cannot login as root or use su. Instead, the installer will set up sudo &#xA;   to allow the user that is created during install to run all administrative commands.&#xA;&#xA;   This means that in the terminal you can use sudo for commands that require root &#xA;   privileges. All programs in the menu will use a graphical sudo to prompt for a &#xA;   password. When sudo asks for a password, it needs your  password,  this means that a &#xA;   root password is not needed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17612" LastActivityDate="2019-03-12T00:36:16.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18473" PostTypeId="2" ParentId="18453" CreationDate="2019-03-12T02:49:04.830" Score="-1" Body="&lt;p&gt;Fred, welcome back!&lt;br&gt;&#xA;&lt;br&gt;&#xA;I did not install LibreOffice via Flatpak, however, I do have &lt;em&gt;some&lt;/em&gt; experience with Flatpak.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Here is the online manual regarding the Flatpak &lt;a href=&quot;http://docs.flatpak.org/en/latest/using-flatpak.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;command&lt;/a&gt;.&lt;br&gt;&#xA;&lt;br&gt;&#xA;The &lt;strong&gt;TLDR&lt;/strong&gt; &lt;em&gt;CliffsNotes&lt;/em&gt; version boils down to this.&lt;br&gt;&#xA;1. Go to Applications -&gt; Terminal (Win+T)&lt;br&gt;&#xA;2. Type: &lt;code&gt;flatpak list --app --show-details&lt;/code&gt;&lt;br&gt;&#xA;3. You should see a LibreOffice line with the following information: 6.2     stable x86_64 flathub system       org.libreoffice.LibreOffice...&lt;br&gt;&#xA;4. It is that &lt;strong&gt;last&lt;/strong&gt; part that we care about.  The uninstall command would be:&lt;br&gt;&#xA;5. Type: &lt;code&gt;flatpak uninstall org.libreoffice.LibreOffice&lt;/code&gt;&lt;br&gt;&#xA;6. After the uninstall is successful, press Cont+D to exit the Terminal.&lt;br&gt;&#xA;&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also try executing &lt;code&gt;sudo snap remove libreoffice&lt;/code&gt; if the above process don't work.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that helps!  Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="16827" LastEditDate="2019-04-19T16:38:33.090" LastActivityDate="2019-04-19T16:38:33.090" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18474" PostTypeId="1" CreationDate="2019-03-12T03:18:58.343" Score="1" ViewCount="1510" Body="&lt;p&gt;I have install Ibus and Ibus-Unikey to type my native language in Elementary OS Juno. Everything works very well, except the case that there is no system tray icon for Ibus, just a band of three images like configuration things as in the photo: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/vTqVX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vTqVX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is, how to display Ibus properly in system tray? Please help me. Thanks. &lt;/p&gt;&#xA;" OwnerUserId="15483" LastActivityDate="2019-03-13T16:18:20.617" Title="No system tray icon for Ibus in Elementary OS Juno" Tags="|wingpanel|system|release-juno|ibus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18475" PostTypeId="1" CreationDate="2019-03-12T05:21:21.593" Score="1" ViewCount="557" Body="&lt;pre&gt;&lt;code&gt;savageholycow@HentaiSavage:~$ sudo lshw -c network&#xA;  *-network DISABLED        &#xA;       description: Ethernet interface&#xA;       product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 1&#xA;       bus info: pci@0000:04:01.0&#xA;       logical name: enp4s1&#xA;       version: 10&#xA;       size: 100Mbit/s&#xA;       capacity: 100Mbit/s&#xA;       width: 32 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation&#xA;       configuration: autonegotiation=off broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=64 link=no maxlatency=32 mingnt=32 multicast=yes port=MII speed=100Mbit/s&#xA;       resources: irq:18 ioport:d000(size=256) memory:f7d00000-f7d000ff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The first thing I can see here is &lt;code&gt;*-network DISABLED&lt;/code&gt;. Is this probably the reason I can't connect to my BroadBand internet connection? I have switched from Windows 10 to Elementary OS last night. I didn't have a clue what was going on at all. Currently I am using a Mobile Broadband connection which probably won't last more than a day from now. So I really need to be able to connect to my PPPoE/Dial Up connection. Could anyone please help :(&lt;/p&gt;&#xA;" OwnerUserId="17617" LastActivityDate="2024-03-21T23:06:00.857" Title="Ethernet Cable Unplugged? [Juno]" Tags="|networking|release-juno|internet|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18476" PostTypeId="2" ParentId="18475" CreationDate="2019-03-12T05:56:10.730" Score="0" Body="&lt;p&gt;Add a new PPPoE connection in Terminal:&lt;br&gt;&#xA;&lt;code&gt;nmcli con edit type pppoe con-name &quot;pppoe&quot;&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;set pppoe.username ******&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;set pppoe.password ******&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;save&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;quit&lt;/code&gt;&lt;br&gt;&#xA;Then &lt;code&gt;nm-connection-editor&lt;/code&gt;, edit ethernet/wired, General tab, uncheck &quot;Automatically connect to this network&quot; for the ethernet/wired connection and leave it only for the PPPoE connection.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2019-03-12T05:56:10.730" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18478" PostTypeId="2" ParentId="18455" CreationDate="2019-03-12T09:50:01.070" Score="0" Body="&lt;p&gt;Many thanks for your interest on my problem. I have many years of interest of Linux as hobby only. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to me that the best method is to use something like Dropbox. This time I tried Pcloud but although I saw some one to recommend it to linux user for example the pcloudDRIVE I downloaded does not work in this my Elementary 5.0 installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I go on :)&lt;/p&gt;&#xA;" OwnerUserId="17598" LastActivityDate="2019-03-12T09:50:01.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18479" PostTypeId="1" CreationDate="2019-03-12T11:40:00.423" Score="2" ViewCount="178" Body="&lt;p&gt;when i Open in terminal in folder, for example music folder, terminal starts with 2 tabs named Music in Current path,i want to disable this, disable opening two tabs in current folder&lt;/p&gt;&#xA;" OwnerUserId="17087" LastActivityDate="2020-01-04T22:36:02.553" Title="Terminal open 2 tabs in current folder" Tags="|pantheon-terminal|release-juno|" AnswerCount="1" CommentCount="1" ClosedDate="2020-01-06T19:15:34.603" ContentLicense="CC BY-SA 4.0" />
  <row Id="18480" PostTypeId="2" ParentId="16544" CreationDate="2019-03-12T16:34:18.180" Score="3" Body="&lt;p&gt;Juno on Hp 8510w with screen rotation problem. I have tried: &#xA;sudo systemctl disable iio-sensor-proxy.service, but command did not remove script /lib/systemd/system/iio-sensor-proxy.service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To disable it at startup, file was renamed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /lib/systemd/system/iio-sensor-proxy.service /lib/systemd/system/iio-sensor-proxy.service_disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17624" LastEditorUserId="17624" LastEditDate="2019-03-12T16:39:23.550" LastActivityDate="2019-03-12T16:39:23.550" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18483" PostTypeId="1" CreationDate="2019-03-13T13:34:22.037" Score="1" ViewCount="458" Body="&lt;p&gt;I own a HP Envy x360 15 inch and i cannot get Elementary OS Juno to install at all. I get into the menu which asks me to try it before install; Install it or install as a manufacturer. I am completely new to Linux and i wish to try eOS as windows is not interesting to me any more, i do not intend on spending 5 hours a day troubleshooting, so if that is too much to ask for, i apologize for bothering you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After pressing either it tells me a list of sentences for 1 second and i managed to take a picture of the machines disabilities. &lt;a href=&quot;https://i.stack.imgur.com/4pC4r.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4pC4r.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17631" LastActivityDate="2019-03-20T12:13:11.860" Title="HP Envy x360 - Juno installation attempt =&gt; black screen and freeze" Tags="|hp|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18484" PostTypeId="1" AcceptedAnswerId="18490" CreationDate="2019-03-13T15:27:06.070" Score="0" ViewCount="407" Body="&lt;p&gt;I have an old version of Sublime Text which I installed manually, and recently added a PPA and installed a new one. Now I have two icons in Planck:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lIb8x.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lIb8x.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;old one to the left, new one to the right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to know where the old one is located to remove it, but I can't. I've tried several commands but they all point to the new one. I have not found the icon that corresponds to the old one either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I find where this app is located in my disk?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After restarting the system, things changed a little bit. Now there are no two icons in Plank, only in the app launcher:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sETTc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sETTc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and both open the same (new) version of Sublime. So now I don't know where this second launcher is, and I also can not launch the old version anymore.&lt;/p&gt;&#xA;" OwnerUserId="9" LastEditorUserId="9" LastEditDate="2019-03-14T12:43:47.863" LastActivityDate="2019-03-14T19:48:39.300" Title="Where is this app located?" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18485" PostTypeId="2" ParentId="18474" CreationDate="2019-03-13T16:18:20.617" Score="1" Body="&lt;p&gt;Knumber10&lt;br&gt;&#xA;&lt;br&gt;&#xA;From your screenshot it would appear that you have a few extra icons in your wingpanel so this solution may be redundant.  However, let's give it a shot!&lt;br&gt;&#xA;&lt;br&gt;&#xA;There is a site maintained by &lt;a href=&quot;https://github.com/mdh34/elementary-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;mdh34&lt;/a&gt; that is the unofficial guide to restore indicator functionality on Elementary OS.&lt;br&gt;&#xA;&lt;br&gt;&#xA;The &lt;strong&gt;TLDR&lt;/strong&gt; boils down to this, if you want to install the prepackaged .deb packages then you would follow these steps:&lt;br&gt;&#xA;1. Download the patched Ubuntu &lt;code&gt;indicator-application&lt;/code&gt; package &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;br&gt;&#xA;2. Download the latest &lt;code&gt;wingpanel-indicator-ayatana&lt;/code&gt; package &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+files/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;br&gt;&#xA;3. To install the packages, you can use a .deb installer or enter the following command in &lt;em&gt;Applications -&gt; Terminal&lt;/em&gt; (or Win+T):&lt;br&gt;&#xA;Type: &lt;code&gt;cd ~/Downloads&lt;/code&gt;&lt;br&gt;&#xA;Type: &lt;code&gt;sudo dpkg -i indicator-application-patched.deb&lt;/code&gt;&lt;br&gt;&#xA;Type: &lt;code&gt;sudo dpkg -i wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; The command above should be entered on &lt;strong&gt;one&lt;/strong&gt; line only.&lt;br&gt;&#xA;4. Once you've installed both packages, a reboot should get your indicators working in Pantheon.&lt;br&gt;&#xA;&lt;br&gt;&#xA;What I like about mdh34's site is that he shows you the process of patching the files on your own.  That appeals to the security conscious side of my nature.  However, I understand that this is not for everyone.  If you are comfortable with the pre-patched files, go ahead and use them!&lt;br&gt;&#xA;&lt;br&gt;&#xA;I hope that helps!  Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-03-13T16:18:20.617" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18486" PostTypeId="1" CreationDate="2019-03-14T00:24:10.813" Score="1" ViewCount="27" Body="&lt;p&gt;I have installed elementary from USB onto an erased disk. While I can run from the USB and also apparently install it from there it will not load up if I remove the USB. I have a Sony Vaio dual core i7. Any suggestions would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="17634" LastActivityDate="2019-03-14T00:24:10.813" Title="I can run elementary on my USB and install on my hard drive but cannot run it from my hard drive" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18487" PostTypeId="1" CreationDate="2019-03-14T00:30:43.650" Score="1" ViewCount="176" Body="&lt;p&gt;Everytime I maximize a windows, a bit of the top hides behind the top bar on eOS Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Screenshots:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Normal behavior&lt;/strong&gt; (Not maximized, on Files)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/J5KqN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J5KqN.png&quot; alt=&quot;Normal behavior&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Bug&lt;/strong&gt; (Files)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fqXZM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fqXZM.png&quot; alt=&quot;Bug&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Normal behavior&lt;/strong&gt; (Firefox)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/60OKn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/60OKn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;strong&gt;Bug&lt;/strong&gt; (Firefox)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0WiHe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0WiHe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17635" LastEditorUserId="3018" LastEditDate="2019-03-14T09:32:29.397" LastActivityDate="2019-03-18T18:53:35.813" Title="Maximized windows hide behind wingpanel" Tags="|wingpanel|window-management|" AnswerCount="2" CommentCount="0" ClosedDate="2019-03-17T00:44:37.957" ContentLicense="CC BY-SA 4.0" />
  <row Id="18488" PostTypeId="1" CreationDate="2019-03-14T00:40:45.220" Score="1" ViewCount="107" Body="&lt;p&gt;The reason I ask, is because wouldn't it be easier if you could just upgrade it like Ubuntu rather than having to do a clean install?&lt;/p&gt;&#xA;" OwnerUserId="14814" LastActivityDate="2019-04-19T16:34:27.997" Title="Why do we have to do a clean install in order to upgrade to Juno?" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18489" PostTypeId="1" CreationDate="2019-03-14T00:43:42.420" Score="1" ViewCount="55" Body="&lt;p&gt;I'm trying to install npm and angular but when I do I get this error, any help is really appreciated because I need this for a job I start on thursday.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rr:12 http://ppa.launchpad.net/tigerite/kernel/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done&#xA;E: The repository 'http://ppa.launchpad.net/tigerite/kernel/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;Error executing command, exiting&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17636" LastEditorUserId="16827" LastEditDate="2019-03-16T17:52:51.683" LastActivityDate="2019-04-15T18:03:25.620" Title="Angular Installation" Tags="|release-juno|software-installation|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18490" PostTypeId="2" ParentId="18484" CreationDate="2019-03-14T01:45:08.387" Score="1" Body="&lt;p&gt;Gabriel,&lt;br&gt;&#xA;&lt;br&gt;&#xA;Any customization to the Plank is done at the user account level. So, we could attempt to find your data this way:&lt;br&gt;&#xA;1. Go to &lt;em&gt;Applications -&gt; Terminal&lt;/em&gt; (or Win+T)&lt;br&gt;&#xA;2. Type: &lt;code&gt;cd ~&lt;/code&gt;&lt;br&gt;&#xA;3. Type: &lt;code&gt;cd .config/plank/dock1/launchers&lt;/code&gt;&lt;br&gt;&#xA;4. Type: &lt;code&gt;ls -lt&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; This will list all of the files, newest first.&lt;br&gt;&#xA;5. Type: &lt;code&gt;cat sublime_text.dockitem | grep Launcher&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; The path to the executable will be displayed (e.g. .../usr/share/applications/sublime_text.desktop)&lt;br&gt;&#xA;6. From step #4 you &lt;em&gt;should&lt;/em&gt; see a second variation on the name sublime_text.dockitem.  Please repeat step #5 with the name of the second dockitem for the path to the second Sublime text application.&lt;br&gt;&#xA;7. After you have the path, the removal of the application can be accomplished with the usual procedures.&lt;br&gt;&#xA;8. When you are finished with Terminal you can exit with &lt;code&gt;Cont+D&lt;/code&gt;.&lt;br&gt;&#xA;&lt;br&gt;&#xA;I hope that helps.  Good luck!&lt;br&gt;&#xA;&lt;br&gt;&#xA;&lt;strong&gt;UPDATE:&lt;/strong&gt; Gabriel, from our experiments with the Plank (and Sublime text) we know the name of the executable for Sublime. So, if you return to the Terminal (or Win+T) and type: &lt;code&gt;sudo find / -type f -name sublime_text&lt;/code&gt; (all on one line) that should do the job! That command uses sudo for full access and will only locate file names with the exact name &quot;sublime_text&quot;.&lt;br&gt;&#xA;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="17282" LastEditDate="2019-03-14T19:48:39.300" LastActivityDate="2019-03-14T19:48:39.300" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18491" PostTypeId="2" ParentId="15304" CreationDate="2019-03-14T02:00:27.383" Score="0" Body="&lt;p&gt;Perhaps the firmware version of the &lt;a href=&quot;https://www.4gltemall.com/fibocom-l830-eb.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fibocom cat6 L830-EB 4G LTE&lt;/a&gt; is not compatible with the OS.  &lt;/p&gt;&#xA;" OwnerUserId="17637" LastActivityDate="2019-03-14T02:00:27.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18492" PostTypeId="1" CreationDate="2019-03-14T02:15:22.503" Score="2" ViewCount="358" Body="&lt;p&gt;I would like to share my &quot;Videos&quot; folder with another user on the same computer. I created a group to which I added the folder as well as both the users. However, when I log into the other user, I still cannot view the contents. Any idea how I can do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RPsG0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RPsG0.png&quot; alt=&quot;Permissions&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17638" LastActivityDate="2019-03-14T18:12:29.650" Title="Share folders between users" Tags="|folder|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18493" PostTypeId="2" ParentId="18488" CreationDate="2019-03-14T02:44:12.680" Score="2" Body="&lt;p&gt;ChrisD93, welcome to the elementary OS forum!&lt;br&gt;&#xA;&lt;br&gt;&#xA;In theory, performing an update from Loki -&gt; Juno could save time and some effort.  However, taking shortcuts is not &lt;em&gt;always&lt;/em&gt; in your best interests.  I, personally, considered Loki ready for my in-production mobile test platform (a Razer Blade Stealth). The new revision, Juno, included a new version numbering system, major updates to the AppCenter, Scratch became Code (with a focus on programming), upgrades to Files, Music, Photos and Terminal.  Along with the updated UI &quot;look and feel&quot; came additional security updates as well.&lt;br&gt;&#xA;&lt;br&gt;&#xA;There is an &lt;strong&gt;entire&lt;/strong&gt; article about this from the elementary OS dev team &lt;a href=&quot;https://medium.com/elementaryos/lets-talk-about-elementary-os-5-0-juno-a3a65b97ee7e&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;br&gt;&#xA;&lt;br&gt;&#xA;ChrisD93, I can hear you saying &quot;but what does all of that have to do with upgrades&quot;?  During my time in enterprise IT, my team (and yours truly) had to manage over 1400 workstations and over 1000 mobile clients.  Each summer, we would reset our labs for use in the fall. Computer imaging has changed greatly over the years from monolithic imaging (replacing the OS and all of the applications), to modular imaging (replace the OS and &quot;push&quot; out applications) to thin imaging (just apply settings and applications over the existing OS).  By avoiding upgrading OS over an older OS we didn't have to fight old configurations, settings, services, applications and whatever was &quot;left over&quot; from the old installation.  Simply put, in today's age of cyber-security what you don't know will (and can) &lt;strong&gt;hurt you&lt;/strong&gt;.  Having a stable and secure computing experience is enough for me to perform a &quot;clean&quot; installation.  I'm not just singling out elementary OS.  I apply this same process to macOS and my Windows clients as well (both personally and professionally).  I believe this extra effort on the front end equates into a more stable and reliable computing experience overall.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Whew, that was long!  Other people will have different points of view and that is OK!  I just have never been disappointed with the &quot;clean installation&quot; approach.  I do so much customization after the installation that I need to be sure that I'm building on a solid foundation.&lt;br&gt;&#xA;&lt;br&gt;&#xA;That's my two cents!  &lt;/p&gt;&#xA;" OwnerUserId="17282" LastEditorUserId="16827" LastEditDate="2019-04-19T16:34:27.997" LastActivityDate="2019-04-19T16:34:27.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18496" PostTypeId="2" ParentId="18483" CreationDate="2019-03-14T09:28:19.377" Score="1" Body="&lt;p&gt;Boot your laptop, when the grub menu appears press e.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will show a lot of text, look for the words &lt;code&gt;quiet splash&lt;/code&gt; and add &lt;code&gt;nomodeset&lt;/code&gt; between them. Like this: &lt;code&gt;quiet nomodeset splash&lt;/code&gt;. Press F10 and it'll boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you need to go into AppCenter and Install the graphic driver from the Updates tab. You can also execute &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; if you prefer working from the terminal.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2019-03-19T11:06:49.890" LastActivityDate="2019-03-19T11:06:49.890" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18498" PostTypeId="2" ParentId="18487" CreationDate="2019-03-14T09:31:34.767" Score="0" Body="&lt;p&gt;I remember having that bug a while ago. Updating solved it.&lt;br&gt;&#xA;For those that can't see the difference, the top bar is a bit cropped when the window is maximized.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-14T09:31:34.767" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18499" PostTypeId="2" ParentId="18492" CreationDate="2019-03-14T18:12:29.650" Score="2" Body="&lt;p&gt;welcome to the Elementary OS forum!&lt;br&gt;&#xA;&lt;br&gt;&#xA;Since you have already created the group &quot;&lt;em&gt;share&lt;/em&gt;&quot; and you are confident that &lt;strong&gt;both&lt;/strong&gt; accounts are members of the group &quot;&lt;em&gt;share&lt;/em&gt;&quot; then setting the POSIX permissions are relatively straight forward.&lt;br&gt;&#xA;&lt;br&gt;&#xA;1. Go to Applications -&gt; Terminal (or Win+T)&lt;br&gt;&#xA;2. In Terminal type: &lt;code&gt;cd ~&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;WARNING:&lt;/strong&gt; The next two commands use the recursive flag!  This means that the command will set the owner and group (then the file permissions) from that point down.  Please follow &lt;strong&gt;all&lt;/strong&gt; instructions carefully...&lt;br&gt;&#xA;3. Type: &lt;code&gt;sudo chown -R rahul:share Videos&lt;/code&gt;&lt;br&gt;&#xA;&lt;strong&gt;NOTE:&lt;/strong&gt; You will be prompted for your login password.&lt;br&gt;&#xA;I included the username from your screen shot.&lt;br&gt;&#xA;4. Type: &lt;code&gt;sudo chmod -R 775 Videos&lt;/code&gt;&lt;br&gt;&#xA;NOTE: This will give full read, write and execute permissions to your rahul account and the &quot;&lt;em&gt;share&lt;/em&gt;&quot; group.&lt;br&gt;&#xA;5. Type Cont+D to exit the Terminal.&lt;br&gt;&#xA;&lt;br&gt;&#xA;At this point, you and anyone in group &quot;&lt;em&gt;share&lt;/em&gt;&quot; will have full access to rahul's Videos folder.  Furthermore, anyone in the &quot;&lt;em&gt;share&lt;/em&gt;&quot; group will be able to make &lt;strong&gt;changes&lt;/strong&gt; (add, edit or delete) files from rahul's Videos folder.&lt;br&gt;&#xA;&lt;br&gt;&#xA;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="17282" LastActivityDate="2019-03-14T18:12:29.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18500" PostTypeId="1" CreationDate="2019-03-14T21:39:19.700" Score="1" ViewCount="39" Body="&lt;p&gt;The Alpha Litebook, a short lived (but wonderful) Linux laptop came with what is claimed to be ElementaryOS but said it was based on Ubuntu 16.04. The company is now gone as are all pages of support about it. Few apparently got their machine before the company went defunct. My machine runs fine and I still love it but I wonder about upgrading the OS. Anyone have a Litebook and if so, has anyone put a newer version of ElementryOS on it? For info on the now-defunct Litebook, check &lt;a href=&quot;https://itsfoss.com/elementary-litebook/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/elementary-litebook/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17647" LastActivityDate="2019-03-14T21:39:19.700" Title="Anyone using an Alpha Litebook? Have you upgraded to Juno?" Tags="|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18501" PostTypeId="1" CreationDate="2019-03-15T02:36:12.660" Score="4" ViewCount="3737" Body="&lt;p&gt;So I have installed Elementary OS hearing how beautiful and lightweight it is. I'll agree it is very good looking but it's too slow in my computer. I'm pretty sure I have installed all my drivers properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My last OS was Windows 10, it was so fast. Chrome wouldn't take more than 3 seconds to launch, but it takes atleast 20-30 seconds for Elementary OS. It takes about 3-5 minutes before a CS:GO match can start for me. Games run well though. Freezing is another problem for me. It freezes outta nowhere and it's very fraustating. I atleast need to wait a minute for that. Opening terminal is also preferably slow. I did not install Elementary OS for that. Any possible reason why is this happening and how can I solve this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specs: i3-3220, 4gb ram, R7-240, H61m Motherboard.&lt;/p&gt;&#xA;" OwnerUserId="17648" LastEditorUserId="17648" LastEditDate="2019-03-15T02:44:44.923" LastActivityDate="2022-02-14T20:30:19.820" Title="Unbelievably slow?" Tags="|release-juno|boot|applications|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18503" PostTypeId="2" ParentId="18162" CreationDate="2019-03-15T08:37:50.973" Score="0" Body="&lt;p&gt;Try to check this &lt;a href=&quot;https://askubuntu.com/questions/955467/dev-sda1-contains-a-file-system-with-errors-check-forced/955504&quot;&gt;issue&lt;/a&gt; on the askubuntu with command &lt;code&gt;fsck -f /dev/sda1&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17651" LastActivityDate="2019-03-15T08:37:50.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18506" PostTypeId="2" ParentId="11353" CreationDate="2019-03-15T20:57:49.223" Score="1" Body="&lt;p&gt;I know this is a couple of years old but.  I had the same issue in Ubuntu and found this solution.  After setting this up (I had to install gsconnect to connect my phone to gnome which I had done anyways).  Installing Geoclue Share on my phone made gnome maps magically just start working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.freeyourdesktop.com/2018/09/improve-gnome-maps-location-accuracy-with-your-android-phone/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.freeyourdesktop.com/2018/09/improve-gnome-maps-location-accuracy-with-your-android-phone/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2019-03-15T20:57:49.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18507" PostTypeId="1" AcceptedAnswerId="18518" CreationDate="2019-03-15T22:15:32.837" Score="0" ViewCount="1334" Body="&lt;p&gt;whenever i try to install anything, i get that. Me and my dumb self also decided to uninstall appcenter, this is another problem im having, &#xA;&lt;code&gt;sudo apt-get install appcenter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; libnss-systemd : Depends: systemd (= 237-3ubuntu10.15)&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;any help appreciated.&lt;/p&gt;&#xA;" OwnerUserId="17660" LastEditorUserId="16827" LastEditDate="2019-04-25T19:13:56.370" LastActivityDate="2019-04-25T19:13:56.370" Title="Packages have unmet dependencies error" Tags="|release-juno|apt|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18508" PostTypeId="1" CreationDate="2019-03-15T23:17:51.787" Score="1" ViewCount="72" Body="&lt;p&gt;Everytime I want to uninstall, or go to the file location of an app from either the app menu or the dock [plank], I always instinctively just right click them, although obviously the only options are to keep in dock or add to dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyway to add a small context menu that includes an Uninstall app, and maybe a file location option? Similar to how you get on android.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17661" LastActivityDate="2019-03-15T23:17:51.787" Title="Right click uninstall/context in apps menu" Tags="|menu|apps|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18509" PostTypeId="1" CreationDate="2019-03-16T12:55:39.923" Score="1" ViewCount="36" Body="&lt;p&gt;for a few days the calendar left my computer without memory and turned off the desktop&lt;a href=&quot;https://i.stack.imgur.com/nNOGj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nNOGj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14211" LastActivityDate="2019-03-16T12:55:39.923" Title="Calendar puts my laptop out of memory" Tags="|desktop|release-juno|calendar|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18510" PostTypeId="2" ParentId="18344" CreationDate="2019-03-16T16:36:09.957" Score="1" Body="&lt;p&gt;I just got a similar model, the Vivobook E203MA. I'm running Elementary OS on that and loving it. It runs so much better than Windows did in the little time I used it.&lt;/p&gt;&#xA;" OwnerUserId="17664" LastActivityDate="2019-03-16T16:36:09.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18511" PostTypeId="1" CreationDate="2019-03-16T16:49:15.220" Score="1" ViewCount="78" Body="&lt;p&gt;Is there a way to increase the quality of the screenshots that are taken by the default Screenshot application, the pictures have a very low quality especially when they are zoomed. I have a screen resolution of 1366x768&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5K0sa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5K0sa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15173" LastEditorUserId="15173" LastEditDate="2019-03-16T18:18:18.820" LastActivityDate="2019-03-16T20:38:06.297" Title="Screenshot Quality" Tags="|wingpanel|screenshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18512" PostTypeId="2" ParentId="18488" CreationDate="2019-03-16T17:59:44.367" Score="0" Body="&lt;p&gt;Though elementary OS is based on Ubuntu LTS but it doesn't have rolling release. Which means you'll have to perform clean install to install a newer version rather than upgrade.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-03-16T17:59:44.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18513" PostTypeId="1" CreationDate="2019-03-16T19:27:55.970" Score="0" ViewCount="177" Body="&lt;p&gt;So I seem to have tied my shoes in a knot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A couple of months ago, I got another hard drive to install Elementary on.  Went through that process, no problem, was still able to access Windows via grub when I needed it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had been thinking about checking out another distro, so I made the move to split my SSD into an os partition and a home partition.  I gave Elementary too little room and it was causing problems, I couldn't even log in, so I assumed I broke it and decided to reformat the whole drive and install pop_OS!.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the popos install I manually configured my partitions, and upon restarting I discovered that Windows was not showing up in grub, and I discovered my Windows drive is configured as MBR, and my linux drive is configured as GPT, and I was told that grub can't find both an MBR and GPT OS at the same time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I decided to reformat my linux drive to MBR and reinstall Elementary.  I did this, however Windows is not showing up and my linux drive is showing as GPT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My windows drive is sda, and my linux drive is sdf.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone could help me untangle this mess I would appreciate it.&lt;/p&gt;&#xA;" OwnerUserId="15297" LastActivityDate="2023-04-24T11:02:25.330" Title="Help Fixing Grub Misconfiguration" Tags="|system-installation|release-juno|grub|uefi|live-cd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18514" PostTypeId="2" ParentId="18487" CreationDate="2019-03-16T19:39:24.397" Score="2" Body="&lt;p&gt;That sounds like: &lt;a href=&quot;https://github.com/elementary/wingpanel/issues/130&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/issues/130&lt;/a&gt;&lt;br&gt;&#xA;Which I though I fixed with: &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/198&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/pull/198&lt;/a&gt;&lt;br&gt;&#xA;Looks like it hasn't been released yet: &lt;a href=&quot;https://github.com/elementary/wingpanel/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/releases&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: The fix is included in the latest version &lt;code&gt;2.2.3&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-03-18T18:53:35.813" LastActivityDate="2019-03-18T18:53:35.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18516" PostTypeId="2" ParentId="18511" CreationDate="2019-03-16T20:38:06.297" Score="2" Body="&lt;p&gt;You can not tweak the quality of your screenshot, it only captures your screen or region (as is, the only quality adjustement you can use is the filetype used when you save your document). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need to modify your screenshot, you should use additional softwares such as Gimp or Krita&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I do not see your issue in the provided capture.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nicolas&lt;/p&gt;&#xA;" OwnerUserId="443" LastActivityDate="2019-03-16T20:38:06.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18518" PostTypeId="2" ParentId="18507" CreationDate="2019-03-17T05:44:21.097" Score="1" Body="&lt;p&gt;Please execute this series of commands,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get autoremove&#xA;&#xA;sudo apt-get --purge remove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;&#xA;sudo apt-get -f install&#xA;&#xA;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&#xA;sudo dpkg-reconfigure -a&#xA;&#xA;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Above answer is grabbed from &lt;a href=&quot;https://askubuntu.com/questions/716915/dpkg-error-processing-packages-cannot-complete-install-desktop-gui-from-termina&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-03-17T05:44:21.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18520" PostTypeId="2" ParentId="3130" CreationDate="2019-03-17T07:38:59.473" Score="2" Body="&lt;p&gt;Just tried this with the latest Geary, and you have to in effect remove two directories for it to work:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.local/share/geary/&amp;lt;account_name&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm -rf ~/.config/geary/&amp;lt;account_name&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17670" LastActivityDate="2019-03-17T07:38:59.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18522" PostTypeId="1" CreationDate="2019-03-17T13:24:33.957" Score="0" ViewCount="384" Body="&lt;p&gt;I am super new to linux environment and I am currently using Elementary OS. While trying to install Anaconda, it seems that I did something wrong. Now every time I open my terminal I am getting the following lines &lt;/p&gt;&#xA;&#xA;&lt;p&gt;bash: /home/username/.bashrc: line 171: syntax error near unexpected token &lt;code&gt;added'&#xA;bash: /home/username/.bashrc: line 171:&lt;/code&gt;esac# added by Anaconda3 2018.12 installer'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have no idea how to remove them. Any advice?&lt;/p&gt;&#xA;" OwnerUserId="17654" LastActivityDate="2024-03-22T00:05:25.713" Title="Terminal starts with bash command" Tags="|pantheon-terminal|bash|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18523" PostTypeId="1" CreationDate="2019-03-17T14:53:30.953" Score="0" ViewCount="31" Body="&lt;p&gt;i installed E-OS on a drive with 128gb... and i want to leave this drive for the os only, and install apps(like steam-telegram etc) on the other drive 1 TB, i am coming from windows where as u know u can choose the directory for every app during the installation... but here u cant :( pls help me i dont want to go back to windows it sucks with ui... and i paid for eos cause i love it really  &lt;/p&gt;&#xA;" OwnerUserId="17579" LastActivityDate="2019-03-18T12:51:27.500" Title="how to make apps to be installed on my other hard drive?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18525" PostTypeId="2" ParentId="18522" CreationDate="2019-03-18T07:37:12.830" Score="0" Body="&lt;p&gt;Like @NirmalL commented, you should try to remove the line. You can either open the file with ElementaryOS Code as an editor or nano via terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to edit it in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt; nano ~/.bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit the file and comment line 171 (# at the beginning of the line) as you should not remove something you don't understand. After that press &quot;Ctrl+S&quot; to save your changes and &quot;Ctrl+X&quot; to exit nano. Create a new Terminal tab to see if it is working. &lt;/p&gt;&#xA;" OwnerUserId="17679" LastActivityDate="2019-03-18T07:37:12.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18529" PostTypeId="2" ParentId="17798" CreationDate="2019-03-18T11:01:54.970" Score="1" Body="&lt;p&gt;Complementing @maccer response, in addition to generating a USB stick properly using Rufus (Windows) or Etcher (Linux) I recommend deactivating &quot;secure bios&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This feature has been shown to be a problem and I have followed several users reporting that they only managed to install linux after disable this bios function.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My working notebook is a Dell Inspiron 3421 and I can only install Linux with UEFI that way.&lt;/p&gt;&#xA;" OwnerUserId="17657" LastActivityDate="2019-03-18T11:01:54.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18530" PostTypeId="2" ParentId="3347" CreationDate="2019-03-18T12:05:59.963" Score="0" Body="&lt;p&gt;First try,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt autoremove&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This should clean up any dependent packages that would result in this behavior.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe the OS should perform this regularly or the uninstall process should also consider removing &quot;unused&quot; packages after removing an App.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Deleting of the *.application files should come as the next, or maybe optional step, as it will fix the symptom and not the cause.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&#xA;K&lt;/p&gt;&#xA;" OwnerUserId="17683" LastActivityDate="2019-03-18T12:05:59.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18531" PostTypeId="2" ParentId="18523" CreationDate="2019-03-18T12:51:27.500" Score="1" Body="&lt;p&gt;UNIX and Linux systems use a radically different way of making different volumes accesible. They typically have a unified filesystem hierarchy where different volumes are mounted in subdirectories under one common root folder (&quot;/&quot;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Traditionally Linux does not separate as much between the OS and third-party applications installed through the package manager. Instead the filesystem hierarchy arranges files and folders by their roles. For example, most applications will consist of one or more binaries plus data like images. They will also, most probably, make use of some libraries. On Windows, a program would be installed in one common location including all of that. However, on Linux the package manager will install the binary to /usr/bin, the libraries to /usr/lib, and data to /usr/share for example. This allows for better reuse of files, leading to a more efficient use of the space. Especially for libraries it also means better RAM utilization (because they need only be loaded once for multiple programs) and better security (because they get security and bug fixes once and are applied to all the programs that use them).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What many people do on (desktop) Linux instead is to separate between the OS (including all programs installed through the package manager) and user data. That means you would mount your 1 TB volume to /home. As for how to do that, there is some official Ubuntu documentation: &lt;a href=&quot;https://help.ubuntu.com/community/Partitioning/Home/Moving&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Partitioning/Home/Moving&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For typical installations 128 GB is way more than you will ever need for the OS including all programs. Normally, the big chunk of data is user data, like photos, movies, music, etc.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2019-03-18T12:51:27.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18533" PostTypeId="1" AcceptedAnswerId="18536" CreationDate="2019-03-18T17:37:24.540" Score="0" ViewCount="228" Body="&lt;p&gt;Suspend was working perfectly fine until yesterday. I mean, closing the lid, pushing the power button and selecting suspend from the power menu was well, suspending the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of today, doing any of those things reboot the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clues?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What: Dell XPS 9550 with 1.9.0 BIOS (latest)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How: elementary OS 5.0 with everything updated through AppCenter. &lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2019-03-19T09:38:06.890" Title="Suspend on elementary Juno has been broken" Tags="|release-juno|suspend|power|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18534" PostTypeId="1" CreationDate="2019-03-19T01:20:02.187" Score="1" ViewCount="67" Body="&lt;p&gt;If the computer goes into suspend, through the power button, closing the lid, or inactivity, I cannot get it to come back to life. My only recourse is to power cycle the laptop.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am unsure where to start looking for problems.  I am having a couple other minor issues, they may be related, I am not certain.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a few PPAs, but the problem has been since the initial install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other than this problem, it has been working really well.  I don't want to have to reinstall the os or format anything.&lt;/p&gt;&#xA;" OwnerUserId="17685" LastActivityDate="2019-03-19T01:20:02.187" Title="Laptop unable to resume after suspend [Juno on Asus A54C, i3 2.2ghz, 8gb ram, SSD]" Tags="|suspend|laptop|release-juno|asus|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18535" PostTypeId="1" CreationDate="2019-03-19T06:01:51.457" Score="1" ViewCount="425" Body="&lt;p&gt;is it possible to change the title bar of some apps to dark specifically sublime text 3? and how? I tried using &lt;a href=&quot;https://github.com/oktayacikalin/gtk-theme-variant-switcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;gtk-theme-variant-switcher&lt;/a&gt; but it doesn't work with the latest EOS. There's also an &lt;a href=&quot;https://packagecontrol.io/packages/GTKDarkThemeVariantSetter&quot; rel=&quot;nofollow noreferrer&quot;&gt;extension&lt;/a&gt; for sublime text 3 but looks like it was archived a long time ago. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="3708" LastActivityDate="2019-05-05T06:02:25.477" Title="Change title bar color of some apps" Tags="|themes|title-bar|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18536" PostTypeId="2" ParentId="18533" CreationDate="2019-03-19T09:38:06.890" Score="0" Body="&lt;p&gt;It resolved itself with no input from my part.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2019-03-19T09:38:06.890" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18537" PostTypeId="1" CreationDate="2019-03-19T09:59:26.927" Score="0" ViewCount="209" Body="&lt;p&gt;I have problems with a touchpad on Lenovo X1 Gen 5th.&#xA;Each time I unlock my screen session the touchpad is not functioning 100%, namely finger gestures for scrolling are messed up. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to run the following command in order to fix it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rmmod psmouse; sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My question is: how can I automate that command to be executed each time I unlock the screen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried scripts in &lt;code&gt;/etc/pm/sleep.d&lt;/code&gt; but with no luck.&lt;/p&gt;&#xA;" OwnerDisplayName="user17684" LastEditorUserId="16827" LastEditDate="2019-04-16T13:46:58.287" LastActivityDate="2019-04-16T13:50:14.763" Title="How to run command on desktop unlock" Tags="|system|touchpad|lenovo|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="18539" PostTypeId="1" AcceptedAnswerId="18551" CreationDate="2019-03-19T13:48:15.820" Score="0" ViewCount="321" Body="&lt;p&gt;I had Elementary OS installed in my notebook, a Dell n4050, running almost 100%, there was only one failure, when I connected the hdmi cable to an external monitor (Samsung) it does not recognize the monitor audio. I looked for some forums but nothing very productive. Has anyone gone through this? How did you correct the error?&lt;/p&gt;&#xA;" OwnerUserId="17690" LastActivityDate="2019-03-21T01:53:33.067" Title="Elementary OS not play audio with other monitor in hdmi" Tags="|audio|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18544" PostTypeId="2" ParentId="18483" CreationDate="2019-03-20T12:13:11.860" Score="0" Body="&lt;p&gt;Manually there is no drivers to be found as shown in picture. But thank you a bunch man &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would love for the OS to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My processor is Ryzen 2500u. Any hope to solve it? I do not even know how to install stuff. I have tried many guides, but it doesnt seem to work. Is it really a big process just to download and install an app from the app center? I hoped it would be a bit like android. &lt;/p&gt;&#xA;" OwnerUserId="17631" LastActivityDate="2019-03-20T12:13:11.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18545" PostTypeId="2" ParentId="18537" CreationDate="2019-03-20T14:08:22.887" Score="1" Body="&lt;p&gt;Looks like we have to answer our questions ourselves to close it:)&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If you want to do something before you suspend, like unload a module&#xA;  or run some script, it’s quite easy with systemd. Similarly, you can&#xA;  easily do something when the system resumes (like reload the module).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The details are in the systemd-suspend man page: man&#xA;  systemd-suspend.service&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Simply put an executable script of any name under&#xA;  /usr/lib/systemd/system-sleep/ that checks whether the first argument&#xA;  is pre (for before the system suspends) or post (after the system&#xA;  wakes from suspend).&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;If it is pre, then do the thing you want to before suspend, if it’s&#xA;  post then do the thing you want to do after resume. Simple!&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Here’s a useless example:&lt;br&gt;&#xA;  &lt;code&gt;#!/bin/sh if [ &quot;${1}&quot; == &quot;pre&quot; ]; then   # Do the thing you want before suspend here, e.g.:   echo &quot;we are suspending at $(date)...&quot; &amp;gt;&#xA;  /tmp/systemd_suspend_test elif [ &quot;${1}&quot; == &quot;post&quot; ]; then   # Do the&#xA;  thing you want after resume here, e.g.:   echo &quot;...and we are back&#xA;  from $(date)&quot; &amp;gt;&amp;gt; /tmp/systemd_suspend_test fi&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So, I implemented this solution from here&#xA;&lt;a href=&quot;https://blog.christophersmart.com/2016/05/11/running-scripts-before-and-after-suspend-with-systemd/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.christophersmart.com/2016/05/11/running-scripts-before-and-after-suspend-with-systemd/&lt;/a&gt;&lt;br&gt;&#xA;That would ensure that after sleep and resume psmodule will get reloaded. This should do.&lt;/p&gt;&#xA;" OwnerDisplayName="user17684" LastEditorUserId="16827" LastEditDate="2019-04-16T13:50:14.763" LastActivityDate="2019-04-16T13:50:14.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18547" PostTypeId="1" CreationDate="2019-03-20T17:29:26.050" Score="1" ViewCount="87" Body="&lt;p&gt;I'm using Elementary OS, but It not resume.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried install &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1631/suspend-not-resuming&quot;&gt;&lt;em&gt;netext73&lt;/em&gt;&lt;/a&gt; but raise error: &lt;code&gt;Netext73 - Not found kernel for your system version&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output from &lt;code&gt;hostnamectl&lt;/code&gt; command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  Operating System: elementary OS 5.0 Juno&#xA;            Kernel: Linux 4.15.0-46-generic&#xA;      Architecture: x86-64&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Did someone fix it?&lt;/p&gt;&#xA;" OwnerUserId="17702" LastActivityDate="2019-03-20T17:29:26.050" Title="Elementary OS Juno - not resume" Tags="|release-juno|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18551" PostTypeId="2" ParentId="18539" CreationDate="2019-03-21T01:53:33.067" Score="0" Body="&lt;p&gt;I had the same issue. I installed pulseadio volume control from the app center.&#xA;Just go to the last tab &quot;configuration&quot; and select the right profile.&lt;/p&gt;&#xA;" OwnerUserId="17705" LastActivityDate="2019-03-21T01:53:33.067" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18552" PostTypeId="1" CreationDate="2019-03-21T06:41:15.207" Score="2" ViewCount="322" Body="&lt;p&gt;I've tried to set up plank on three monitors but without success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I parsed these answers also: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7642/how-can-i-have-one-plank-on-each-of-my-monitors?rq=1&quot;&gt;How can I have one plank on each of my monitors&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9084/how-to-duplicate-the-taskbar-on-the-second-monitor-on-loki?rq=1&quot;&gt;How to duplicate the taskbar on the second monitor on Loki?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;step1:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;change settings in &lt;code&gt;dconf-editor&lt;/code&gt; ==&gt; &lt;code&gt;net.launchpad.plank.enabled_docks&lt;/code&gt;: &#xA;  from &lt;code&gt;[dock1]&lt;/code&gt; to &lt;code&gt;[dock1, dock2, dock3]&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;step2:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;copy configs of the dock1 to the dock2 and dock3:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp -r ~/.config/plank/dock1 ~/.config/plank/dock2&#xA;cp -r ~/.config/plank/dock1 ~/.config/plank/dock3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;step3:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;restart plank: &lt;code&gt;sudo killall plank&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;At the end I got nothing. I tried to log out but nothing was changed, only one plank on the main monitor was present.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you please explain how to do this on &lt;strong&gt;Juno 5.0&lt;/strong&gt;? Any help is really appreciated.&lt;/p&gt;&#xA;" OwnerUserId="5071" LastActivityDate="2019-03-23T07:03:35.673" Title="plank on three monitors using Juno 5.0" Tags="|release-juno|plank|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="18553" PostTypeId="2" ParentId="18364" CreationDate="2019-03-21T08:08:57.377" Score="2" Body="&lt;p&gt;I've found the solution: Settings -&gt; Universal Access -&gt; Keyboard. Option &quot;Use Modifiers Keys in Sequence (Sticky Keys)&quot; was activated. Disable it and Shift key went normal again.&lt;a href=&quot;https://i.stack.imgur.com/erT8w.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/erT8w.png&quot; alt=&quot;Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17238" LastEditorUserId="17238" LastEditDate="2020-02-28T09:44:00.640" LastActivityDate="2020-02-28T09:44:00.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18554" PostTypeId="1" CreationDate="2019-03-21T13:31:02.270" Score="2" ViewCount="413" Body="&lt;p&gt;How to make notification when battery is low 15%-10% and how to make notification when battery already full in charge?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17698" LastActivityDate="2020-03-20T19:57:43.557" Title="Battery low and full nothing notification" Tags="|release-juno|notifications|battery|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18555" PostTypeId="2" ParentId="17631" CreationDate="2019-03-21T14:15:05.140" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16519/elementary-os-ignoring-suspend-disable&quot;&gt;This bug has been reported here&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89&quot; rel=&quot;nofollow noreferrer&quot;&gt;here, in much more detail&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems the fix is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# become the superuser&#xA;sudo su&#xA;# launch a bash shell as lightdm&#xA;su - -s /bin/bash lightdm&#xA;# use dbus-launch to launch the gstreamer command within the active dbus session&#xA;# the gstreamer command sets the given key to the special value 'nothing', which is the setting which&#xA;# should disable suspend when connected to a power source:&#xA;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type \nothing&#xA;# to set the sleep time on battery to 30 minutes:&#xA;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout \1800&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To check your current settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# enter lightdm settings again (or don't exit and skip these 2 lines):&#xA;sudo su&#xA;su - -s /bin/bash lightdm&#xA;# number of seconds before AC timeout action (mine said 1200, only 20 minutes):&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout&#xA;# what is the AC timeout action:&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;# number of seconds before battery timeout action:&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout&#xA;# what is the battery timeout action:&#xA;dbus-launch gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Alternatively you could set a longer ac timeout time instead of disabling suspend (3600s - 1 hour):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout \3600&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17587" LastEditorUserId="17587" LastEditDate="2019-03-21T14:44:03.633" LastActivityDate="2019-03-21T14:44:03.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18556" PostTypeId="2" ParentId="18554" CreationDate="2019-03-21T17:04:26.167" Score="0" Body="&lt;p&gt;I was searching for the same thing. Here I found a solution to get notifications for low and critically low battery state: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7810/set-level-of-battery-notification-in-loki&quot;&gt;Battery notifications&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17218" LastActivityDate="2019-03-21T17:04:26.167" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18558" PostTypeId="2" ParentId="17631" CreationDate="2019-03-21T18:59:39.400" Score="0" Body="&lt;p&gt;Or you can install caffeine (available in the app center)&lt;/p&gt;&#xA;" OwnerUserId="17705" LastActivityDate="2019-03-21T18:59:39.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18559" PostTypeId="1" CreationDate="2019-03-22T01:21:42.790" Score="0" ViewCount="148" Body="&lt;p&gt;I'm trying to install node and angular on my machine but every time I do I get the error below. if someone could help I'd be really great.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rr:12 http://ppa.launchpad.net/tigerite/kernel/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done&#xA;E: The repository 'http://ppa.launchpad.net/tigerite/kernel/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;Error executing command, exiting&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17711" LastEditorUserId="16827" LastEditDate="2019-04-01T19:21:03.953" LastActivityDate="2019-05-01T22:02:45.603" Title="trying to install node and angular but it's not working!" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18560" PostTypeId="1" CreationDate="2019-03-22T10:25:35.340" Score="1" ViewCount="35" Body="&lt;p&gt;I accidentally deleted the file /lib/ld-lsb.so.3. I wanted to know if it's a necessary file to guarantee the good functionality of the system (last version of Elementary OS, equivalent to bionic Ubuntu), and in case how to restore it. I gave a look to this post (&lt;a href=&quot;https://askubuntu.com/questions/1035916/how-do-i-restore-libz-so-1&quot;&gt;https://askubuntu.com/questions/1035916/how-do-i-restore-libz-so-1&lt;/a&gt;) to see if I can find and restore the deleted file, but I couldn't find anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="17713" LastActivityDate="2019-03-22T10:25:35.340" Title="I accidentally deleted the file /lib/ld-lsb.so.3" Tags="|release-juno|apt|shared-libraries|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18562" PostTypeId="2" ParentId="18559" CreationDate="2019-03-22T11:41:04.123" Score="1" Body="&lt;p&gt;I pretty much got it to work following this guide: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-node-js-on-ubuntu-18-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.digitalocean.com/community/tutorials/how-to-install-node-js-on-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That message, however, doesn't really relate to npm or node.js. Did that happen on a clean elementary installation, or did you try to manually add certain package repositories (most notably, in this case, the tigerite kernel PPA)?&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-03-22T11:41:04.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18563" PostTypeId="2" ParentId="18403" CreationDate="2019-03-22T11:48:49.593" Score="0" Body="&lt;p&gt;After communicating within the elementaryos Slack channel, it seems a reported / known bug. See &lt;a href=&quot;https://github.com/elementary/wingpanel/issues/184#&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/issues/184#&lt;/a&gt; for more.&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-03-22T11:48:49.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18564" PostTypeId="1" CreationDate="2019-03-22T18:04:11.517" Score="0" ViewCount="194" Body="&lt;p&gt;I will be trying it on a Mac Mini. I have 12TB of external thunderbolt storage attached to the mac hence the thunderbolt support will be absolutely necessary.&lt;/p&gt;&#xA;" OwnerUserId="17716" LastActivityDate="2019-03-30T15:56:39.380" Title="Are thunderbolt interfaces / external drives supported?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18565" PostTypeId="1" CreationDate="2019-03-22T18:25:05.850" Score="0" ViewCount="112" Body="&lt;p&gt;Recently I have been doing several tests with different packages on Elementary 5 to find the set that best meets my work needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A few days ago, I recorded some videos using the Screen Recorder tool (from Mohammed ALMadhoun) that is available in the store and I remember testing it right after the recording and everything was perfect, the videos were recorded in MP4 format with 30 FPS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link to video file - &lt;a href=&quot;https://drive.google.com/open?id=1RSAJmRd6b6K0YuIiLTQSrHuG-zX51tIO&quot; rel=&quot;nofollow noreferrer&quot;&gt;click here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, after a clean installation of Elementary (already updated) the same videos are completely distorted on my desktop (attached image), but in my notebook (elementary 5) and in the Android phone the video is displayed perfectly.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MWMwW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MWMwW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think some suggestions will be to install the restricted codec package, however, on my notebook the files run perfectly without the need to install any extra software, but even then I have already installed the codecs and the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other videos files in MP4 format, such as those recorded on my mobile phone for example run smoothly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you tell me how I can collect more technical information to submit a bug? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for your attention.&lt;/p&gt;&#xA;" OwnerUserId="17657" LastActivityDate="2019-03-22T18:25:05.850" Title="Problem with playing screen record videos in a new installation of eOS 5.0" Tags="|release-juno|screenshot|video-player|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18566" PostTypeId="1" CreationDate="2019-03-22T21:08:19.420" Score="1" ViewCount="52" Body="&lt;p&gt;I am admittedly relatively inexperienced in Linux so maybe I am missing something. I have gotten the wifi to work on my laptop (an HP Pavillion DM4 Beats edition) and it connects fine to something I have a password for, like my personal wifi, but when I try to connect to a WiFi hotspot it fails. I have tried this with Xfinity, Starbucks, and Books a Million ones so it is not just one provider causing trouble. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried a few suggested fixes found via internet searches, but the mostly didn't apply or were old enough to be no longer valid. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did try installing net-tools and basic update of things per instructions I found online, but I can't seem to find a fix for this.  &lt;/p&gt;&#xA;" OwnerUserId="17717" LastActivityDate="2019-06-01T19:02:23.847" Title="Trouble logging into public wifi hotspots" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18569" PostTypeId="1" CreationDate="2019-03-23T15:42:30.303" Score="0" ViewCount="128" Body="&lt;p&gt;Just installed Loki on a desktop with a Realtek (RTL8111/RTL8168) ethernet card, and the LAN does not work. Apparently this is an issue with the card, so to fix it I went to:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.unixblogger.com/how-to-get-your-realtek-rtl8111rtl8168-working-updated-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How To get your Realtek RTL8111/RTL8168 working (updated guide)&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and downloaded the driver manually from my laptop (since I have no internet connection on that PC). Now, to install it I need to first blacklist the old driver with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo blacklist r8169 &amp;gt;&amp;gt; /etc/modprobe.d/blacklist.conf'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which worked, and then simply:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ./autorun.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem is that this results in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./autorun.sh: 30: ./autorun.sh: make: not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which is &lt;a href=&quot;https://superuser.com/questions/192683/sh-make-not-found&quot;&gt;apparently fixed with&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I have no internet connection to do that!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I doing something wrong? Is it really this difficult to get LAN internet connection with Loki using a Realtek card?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2019-04-26T16:01:00.160" Title="Loki: make not found (trying to update Realtek drivers)" Tags="|internet|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18572" PostTypeId="1" CreationDate="2019-03-25T02:27:30.020" Score="1" ViewCount="31" Body="&lt;p&gt;I recently replaced Window 7 Pro with elementary OS Juno for my HTPC. I have 3 drives that I'm using. Drive 1. is Main drive for elementary OS Juno. Drive 2. For Movies and Music. Drive 3 is for more Movies and Music. I can not transfer(copy/paste) new movies or music files to drives 2 or 3. Either the Paste option is grey out or it gives me an error of drive is read only.&#xA;Do I need to reformat drives 2 and 3 under elementary OS Juno in order for me to copy/paste new files? Or is there a way around this without losing all my data?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;br&gt;&#xA;New elementary OS User&lt;/p&gt;&#xA;" OwnerUserId="17728" LastEditorUserId="16827" LastEditDate="2019-04-15T22:06:55.733" LastActivityDate="2019-04-15T22:06:55.733" Title="Can not add new files to existing drives after elementary OS Juno install" Tags="|release-juno|hardware|install|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18576" PostTypeId="1" CreationDate="2019-03-25T22:48:32.370" Score="1" ViewCount="74" Body="&lt;p&gt;My computer won't login completely past a black screen with mouse pointer after login. Everything was fine until I updated now I'm missing the clock/calendar from the bar, programs suddenly missing like Pithos but when visiting the &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;, show's it's installed. What in the hell has happened, I need to access this machine for work! I logged into terminal with &lt;kbd&gt;CTRL&lt;/kbd&gt; + &lt;kbd&gt;F1&lt;/kbd&gt; and it's not detecting my NIC either (can't reach internet).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works fine in Windows 10.&lt;/p&gt;&#xA;" OwnerUserId="17738" LastEditorUserId="16827" LastEditDate="2019-04-07T04:36:03.940" LastActivityDate="2019-04-08T15:35:50.450" Title="Computer won't load desktop after logging in?" Tags="|greeter|dual-boot|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18577" PostTypeId="1" CreationDate="2019-03-26T15:36:15.753" Score="1" ViewCount="60" Body="&lt;p&gt;While trying to run dell-recovery, I am getting this traceback:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/dell-recovery&quot;, line 24, in &amp;lt;module&amp;gt;&#xA;    from Dell.recovery_common import find_partition, check_version, find_burners&#xA;  File &quot;/usr/lib/python3/dist-packages/Dell/recovery_common.py&quot;, line 29, in &amp;lt;module&amp;gt;&#xA;    gi.require_version('UDisks', '2.0')&#xA;  File &quot;/usr/lib/python3/dist-packages/gi/__init__.py&quot;, line 130, in require_version&#xA;    raise ValueError('Namespace %s not available' % namespace)&#xA;ValueError: Namespace UDisks not available&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Even though I do have Udisks installed (2.7.6-3ubuntu0.2).&lt;br&gt;&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17747" LastActivityDate="2019-03-26T15:36:15.753" Title="Traceback while trying to run dell-recovery" Tags="|dell|python|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18578" PostTypeId="1" CreationDate="2019-03-26T16:42:08.990" Score="2" ViewCount="240" Body="&lt;p&gt;When logging in the system knocks an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[drm: intel_dp_start_link_train [i915]] failed to enable link training&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe it happened because of whom I installed nvidia-smi. No video card, Intel-i7 processor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SHfgR.jpg&quot; alt=&quot;error screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance&lt;/p&gt;&#xA;" OwnerUserId="17748" LastEditorUserId="17748" LastEditDate="2019-03-26T20:55:06.243" LastActivityDate="2019-03-26T20:55:06.243" Title="Elementary os on login &lt;ERROR&gt; failed to enable link training" Tags="|graphic-drivers|drivers|intel|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18579" PostTypeId="1" CreationDate="2019-03-26T20:21:46.690" Score="1" ViewCount="140" Body="&lt;p&gt;Does the developer team have any plans to produce an SDk for the operating system?&#xA;I imagine the great effort to produce a larger application.&lt;/p&gt;&#xA;" OwnerUserId="17754" LastActivityDate="2019-05-05T21:23:47.513" Title="Will we have an SDK for elementary OS?" Tags="|system|development|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18580" PostTypeId="2" ParentId="18579" CreationDate="2019-03-26T20:50:52.517" Score="1" Body="&lt;p&gt;You can use this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need any help to start:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.youtube.com/watch?v=7z0NVCrJr6A&amp;amp;list=PLriKzYyLb28mn2lS3c5yqMHgLREi7kR9-&amp;amp;index=2&amp;amp;t=0s&quot; rel=&quot;nofollow noreferrer&quot;&gt;Youtube - Video Tutorials by Alessandro Castellani &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://developer.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.elementary.io&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="17493" LastActivityDate="2019-03-26T20:50:52.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18581" PostTypeId="1" CreationDate="2019-03-27T00:31:43.410" Score="0" ViewCount="150" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/8Ch96.jpg&quot; alt=&quot;How do I fix this?&quot;&gt; How do I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS: elementary OS 5.0 Juno x86_64&lt;br&gt;&#xA;CPU: Intel i7-7700 (8) @ 4.200GHz&lt;br&gt;&#xA;Memory: 3219MiB / 16005MiB&lt;br&gt;&#xA;GPU: NVIDIA GeForce GTX 1070&lt;br&gt;&#xA;GPU Driver: NVIDIA 418.56   &lt;/p&gt;&#xA;" OwnerUserId="17758" LastEditorUserId="16827" LastEditDate="2019-04-07T04:33:01.783" LastActivityDate="2019-04-07T04:33:01.783" Title="Lightdm greeter" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18582" PostTypeId="1" CreationDate="2019-03-27T02:02:20.507" Score="1" ViewCount="15" Body="&lt;p&gt;I'm a new user and don't know much about EOS, but it said that the first thing new users need to do is update and upgrade &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is, I don't know how to fix this problem (screenshoot), I already try to find the way to fix from google but no one could fix this, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TzQxK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TzQxK.png&quot; alt=&quot;how to fix it?&quot;&gt;&lt;/a&gt;&#xA;It happens when I write sudo apt-update,&#xA;Does anybody know how to fix it ?&#xA;Thankyou&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's elementary OS 0.4.1 Loki &#xA;(sorry for my bad english)&lt;/p&gt;&#xA;" OwnerUserId="17759" LastActivityDate="2019-03-27T02:02:20.507" Title="Won't update because some index files failed to download/ hash sum mismatch" Tags="|release-loki|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18584" PostTypeId="2" ParentId="18581" CreationDate="2019-03-27T13:34:46.120" Score="1" Body="&lt;p&gt;Press Ctrl+Alt+F2 to get to a command prompt. Login there and press Ctrl+Alt+F7. It should load your desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once that's done revert everything you did while installing that nvidia driver and install the driver avaliable from Appcenter on the Installed tab.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The driver you've installed is an unstable version that's not supported by elementary so it's normal to find errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't know how to remove the first driver you better backup your data and install elementary again. Then just install the driver inside Appcenter.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-27T13:34:46.120" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18585" PostTypeId="2" ParentId="8629" CreationDate="2019-03-27T13:47:47.243" Score="2" Body="&lt;p&gt;&lt;code&gt;killall io.elementary.appcenter&lt;/code&gt; worked for me&#xA;to kill the process&lt;/p&gt;&#xA;" OwnerUserId="17012" LastEditorUserId="138" LastEditDate="2019-03-31T10:03:49.947" LastActivityDate="2019-03-31T10:03:49.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18586" PostTypeId="2" ParentId="18382" CreationDate="2019-03-27T15:08:41.197" Score="0" Body="&lt;p&gt;Even if no one had this problem, it seems that Firefox 66 fixed it. I will test it some more and report back.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2019-03-27T15:08:41.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18587" PostTypeId="2" ParentId="18569" CreationDate="2019-03-27T15:17:25.317" Score="1" Body="&lt;p&gt;Forget about that. Just download the .deb file from &lt;a href=&quot;https://packages.ubuntu.com/xenial/all/r8168-dkms/download&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and then install it on the other pc with &lt;code&gt;sudo apt install ./r8168*.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That version is for Loki only. If you decide to use Juno you'd need to download &lt;a href=&quot;https://packages.ubuntu.com/bionic/all/r8168-dkms/download&quot; rel=&quot;nofollow noreferrer&quot;&gt;this version&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-27T15:17:25.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18588" PostTypeId="1" CreationDate="2019-03-27T20:03:35.710" Score="1" ViewCount="476" Body="&lt;p&gt;During the installation of a software (Abaqus) the following error appears:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;An error occurred while executing the action.&#xA;Technical details:&#xA;Creating child process failed. Log ID is 0001&#xA;/home/luca/Documents/PC_Utilities/Abaqus/4/SIMULIA_fesafe/Linux64/1/inst/common/installationFiles/code/unzip -qo &quot;/home/luca/Documents/PC_Utilities/Abaqus/4/SIMULIA_fesafe/Linux64/1/inst/common/installationFiles/code/siteIDandDslsStat.zip&quot; -d &quot;/tmp/DSY_20190325T225926+0100/tmp&quot;&#xA;Stdout:&#xA;Stderr: unzip: loadlocale.c:130: _nl_intern_locale_data: Assertion `cnt &amp;lt; (sizeof (_nl_value_type_LC_TIME) / sizeof (_nl_value_type_LC_TIME[0]))' failed.&#xA;Action LaunchAppAction from feature CODE\linux_a64\SMATocLicPanel failed.&#xA;Action ID: unzip_siteIDandDslsStat&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyone knows what is it and how to solve it? Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17713" LastEditorUserId="16827" LastEditDate="2019-04-18T15:02:47.320" LastActivityDate="2019-04-18T15:02:47.320" Title="Error durin installation of a program" Tags="|release-juno|software-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18590" PostTypeId="1" CreationDate="2019-03-28T02:50:43.810" Score="1" ViewCount="33" Body="&lt;p&gt;Should have explored more within Oracle or on usb drive before duel booting ANY distro. I’ve deleted the partition containing Elementary OS but now my laptop chooses to boot load GNU GRUB as primary. I don’t want it on my laptop. Can someone dig me out of the mess my ignorance has put me in? I don’t know what partition it resides in. I don’t know what I’m looking for in Disk Manager as nothing is jumping out “I’m right here.” I’ve created a Windows recovery USB stick.&#xA;I’ve read every thread involving removing GRUB but I still can’t identify the correct partition. &lt;/p&gt;&#xA;" OwnerUserId="17763" LastActivityDate="2019-08-25T14:00:45.057" Title="Can’t uproot GNU GRUB" Tags="|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18591" PostTypeId="1" CreationDate="2019-03-28T04:04:08.997" Score="1" ViewCount="641" Body="&lt;p&gt;I have a problem with the native videos app:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not able to play specific videos in it (Screen is black) while I can play some other videos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using VLC &lt;strong&gt;(Which somehow can play the target files with no problems)&lt;/strong&gt; it is shown that the videos that can be played natively have this information:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Codec: H264 - MPEG-4 AVC (part 10) (avc1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;While the ones I am not able to,  show this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Codec: H264 - MPEG-4 AVC (part 10) (h264)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Not sure if this has any relevance but this is a difference I have found.&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have reinstalled and updated the FFMPEG and Libav (Using terminal and the Synaptic package manager) codecs many times and in many different ways to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my first Linux experience so I can't troubleshoot this appropriately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I have discovered that the videos that can be played natively have no audio&lt;/p&gt;&#xA;" OwnerUserId="17764" LastEditorUserId="17764" LastEditDate="2019-03-28T04:13:30.910" LastActivityDate="2019-05-05T04:04:55.667" Title="Native videos app can't play some type of videos" Tags="|release-juno|applications|apt|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18593" PostTypeId="2" ParentId="17256" CreationDate="2019-03-28T12:26:07.327" Score="0" Body="&lt;p&gt;I find it quite annoying that there's no easy way of finding these. Whats the point?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;M&lt;/kbd&gt; Seems to comment a line.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17361" LastActivityDate="2019-03-28T12:26:07.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18594" PostTypeId="2" ParentId="18590" CreationDate="2019-03-28T12:28:54.923" Score="1" Body="&lt;p&gt;If you have Windows installed then you can just go inside your firmware/bios and set the first boot device to the Windows Boot Manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To delete grub you need to mount the /boot partition and delete some files. However I don't think it's worth the trouble.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-28T12:28:54.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18596" PostTypeId="1" CreationDate="2019-03-28T15:35:17.563" Score="1" ViewCount="119" Body="&lt;p&gt;I have two separate drives with Window and EOS Juno. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to encrypt both systems but want to avoid any booting issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any recommendation how this can be achieved?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Model: SAMSUNG MZVLB512HAJQ-000L7 (nvme)&#xA;Disk /dev/nvme0n1: 512GB&#xA;Sector size (logical/physical): 512B/512B&#xA;Partition Table: gpt&#xA;Disk Flags: &#xA;&#xA;Number  Start   End    Size    File system  Name                          Flags&#xA; 1      1049kB  274MB  273MB   fat32        EFI system partition          boot, hidden, esp&#xA; 2      274MB   290MB  16.8MB               Microsoft reserved partition  msftres&#xA; 3      290MB   511GB  511GB   ntfs         Basic data partition          msftdata&#xA; 4      511GB   512GB  1049MB  ntfs         Basic data partition          hidden, diag&#xA;&#xA;&#xA;Model: TOSHIBA-RC100 (nvme)&#xA;Disk /dev/nvme1n1: 240GB&#xA;Sector size (logical/physical): 512B/512B&#xA;Partition Table: gpt&#xA;Disk Flags: &#xA;&#xA;Number  Start   End    Size   File system  Name  Flags&#xA; 1      1049kB  240GB  240GB  ext4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am considering VeraCrypt. I haven't encrypted Elementary at installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to encrypt/decrypt both hard drives using same encryption key/software? i.e. get Encryption password prompt before GRUB and access either system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17604" LastEditorUserId="17604" LastEditDate="2019-03-28T16:44:16.820" LastActivityDate="2019-03-28T16:44:16.820" Title="Disk Encryption Juno/Windows 10 - Dual Boot from separate hard drive" Tags="|boot|dual-boot|hdd|full-disk-encryption|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18597" PostTypeId="1" CreationDate="2019-03-28T18:25:59.717" Score="1" ViewCount="194" Body="&lt;p&gt;I am using Elementary OS 5.0 with Linux 4.15.0-46 and GTK+ 3.22.30 on a Dell G7 with GeForce GTX 1050.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I turn the computer on with HDMI plugged in, everything goes well. However, when I plug the HDMI when the computer is on, the computer screen goes black with some noisy colors and the monitor doesn't detect anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could I do to track and workaround this problem?&lt;/p&gt;&#xA;" OwnerUserId="15745" LastEditorUserId="16827" LastEditDate="2019-04-07T04:40:59.080" LastActivityDate="2019-04-07T04:40:59.080" Title="Problem with HDMI external monitor" Tags="|display|hdmi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18598" PostTypeId="2" ParentId="15801" CreationDate="2019-03-29T06:37:03.513" Score="1" Body="&lt;p&gt;I had this problem and rectified by selecting &lt;strong&gt;VMSVGA&lt;/strong&gt; as graphics driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZogD5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZogD5.png&quot; alt=&quot;Graphics Driver&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17771" LastActivityDate="2019-03-29T06:37:03.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18599" PostTypeId="2" ParentId="10123" CreationDate="2019-03-29T13:23:07.407" Score="1" Body="&lt;p&gt;It looks like this is a &lt;a href=&quot;https://github.com/elementary/gala/issues/13&quot; rel=&quot;nofollow noreferrer&quot;&gt;known issue&lt;/a&gt; in Gala. The problem seems to be triggered by plugging in a new display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;a href=&quot;https://elementaryos.stackexchange.com/a/10124/792&quot;&gt;workaround&lt;/a&gt; posted by lemonslice resolves the problem for me.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2019-03-29T13:23:07.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18600" PostTypeId="1" AcceptedAnswerId="18601" CreationDate="2019-03-29T14:58:48.027" Score="1" ViewCount="130" Body="&lt;p&gt;I just began using Elementary OS and I am having a problem with videos. I found what might be a solution here on Stack Exchange, that suggests removing a package, but being one-day old here I have only a small idea of what might be involved in removing a package, just that it probably involves the command line interface. However I would like some clear instructions as to how to go about removing a package. Any help would be appreciated. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17772" LastActivityDate="2019-05-05T05:25:45.847" Title="How do I remove a package?" Tags="|package|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18601" PostTypeId="2" ParentId="18600" CreationDate="2019-03-29T23:03:30.803" Score="1" Body="&lt;p&gt;in the shell you can remove a package with the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove packagename&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;after that I would suggest to run the following command to remove unused dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also remove package from the app center, just select the package and click &lt;kbd&gt;uninstall&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17776" LastEditorUserId="16827" LastEditDate="2019-05-05T05:25:45.847" LastActivityDate="2019-05-05T05:25:45.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18602" PostTypeId="1" CreationDate="2019-03-30T04:06:55.463" Score="1" ViewCount="150" Body="&lt;p&gt;full details from image &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Problem executing scripts APT::Update::Post-Invoke-Success 'if /usr/bin/test -w /var/lib/command-not-found/ -a -e /usr/lib/cnf-update-db; then /usr/lib/cnf-update-db &amp;gt; /dev/null; fi'&#xA;E: Sub-process returned an error code&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if it helps when ever I try to do apt-get update I get the following code&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/cnf-update-db&quot;, line 8, in &amp;lt;module&amp;gt;&#xA;    from CommandNotFound.db.creator import DbCreator&#xA;  File &quot;/usr/lib/python3/dist-packages/CommandNotFound/db/creator.py&quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;Error in sys.excepthook:&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/python3/dist-packages/apport_python_hook.py&quot;, line 63, in apport_excepthook&#xA;    from apport.fileutils import likely_packaged, get_recent_crashes&#xA;  File &quot;/usr/lib/python3/dist-packages/apport/__init__.py&quot;, line 5, in &amp;lt;module&amp;gt;&#xA;    from apport.report import Report&#xA;  File &quot;/usr/lib/python3/dist-packages/apport/report.py&quot;, line 30, in &amp;lt;module&amp;gt;&#xA;    import apport.fileutils&#xA;  File &quot;/usr/lib/python3/dist-packages/apport/fileutils.py&quot;, line 23, in &amp;lt;module&amp;gt;&#xA;    from apport.packaging_impl import impl as packaging&#xA;  File &quot;/usr/lib/python3/dist-packages/apport/packaging_impl.py&quot;, line 24, in &amp;lt;module&amp;gt;&#xA;    import apt&#xA;  File &quot;/usr/lib/python3/dist-packages/apt/__init__.py&quot;, line 23, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;&#xA;Original exception was:&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/cnf-update-db&quot;, line 8, in &amp;lt;module&amp;gt;&#xA;    from CommandNotFound.db.creator import DbCreator&#xA;  File &quot;/usr/lib/python3/dist-packages/CommandNotFound/db/creator.py&quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;Reading package lists... Done&#xA;E: Problem executing scripts APT::Update::Post-Invoke-Success 'if /usr/bin/test -w /var/lib/command-not-found/ -a -e /usr/lib/cnf-update-db; then /usr/lib/cnf-update-db &amp;gt; /dev/null; fi'&#xA;E: Sub-process returned an error code&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="17779" LastActivityDate="2019-03-30T04:06:55.463" Title="Failed to fetch update" Tags="|updates|appcenter|apt|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18603" PostTypeId="1" CreationDate="2019-03-30T08:31:44.157" Score="1" ViewCount="114" Body="&lt;p&gt;VirtualBox wont let me start even though i downloaded every files that you need. It keeps saying something is wrong with the file /dev/vboxdrv but the file doesn't even exist&lt;/p&gt;&#xA;" OwnerUserId="17780" LastActivityDate="2019-05-27T12:56:44.593" Title="VirtualBox 'Kernel driver not installed (rc=-1908)'" Tags="|kernel|virtualbox|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18605" PostTypeId="2" ParentId="12279" CreationDate="2019-03-30T09:08:14.770" Score="1" Body="&lt;p&gt;Go to &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;System setting. Then in system setting go to to keyboard. This is where you change your shortcuts&lt;/p&gt;&#xA;  &#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;Go to custom to make your own shortcuts&lt;/p&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If my explanation are terrible just check the image below :)  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OukuD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OukuD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17780" LastEditorUserId="16827" LastEditDate="2019-04-01T10:58:12.037" LastActivityDate="2019-04-01T10:58:12.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18606" PostTypeId="1" CreationDate="2019-03-30T13:19:01.783" Score="1" ViewCount="16" Body="&lt;p&gt;don't mind updating but no voice, headphone is working but speaker isn't&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ssw8q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ssw8q.png&quot; alt=&quot;Photo&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I can't fix this ,No problem before updating&#xA;how can i get back it  THANKS!&lt;/p&gt;&#xA;" OwnerUserId="17781" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-03-30T13:19:01.783" Title="Update :( no voice" Tags="|updates|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18608" PostTypeId="2" ParentId="18564" CreationDate="2019-03-30T15:56:39.380" Score="1" Body="&lt;p&gt;Thunderbolt works but Thunderbolt 3 may have issues. You better boot a live USB and check it out yourself.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-30T15:56:39.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18609" PostTypeId="1" CreationDate="2019-03-30T22:16:03.837" Score="1" ViewCount="1681" Body="&lt;p&gt;How to hide top panel in elementary os? This is boring when I maximize a browser and see top black panel over browser.&lt;/p&gt;&#xA;" OwnerUserId="17785" LastEditorUserId="15702" LastEditDate="2019-04-09T18:10:02.273" LastActivityDate="2019-09-12T00:02:10.297" Title="How to hide top panel in elementary os?" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18611" PostTypeId="1" CreationDate="2019-03-31T02:16:37.640" Score="2" ViewCount="495" Body="&lt;p&gt;Is it possible to turn up the volume past the maximum? I recall in Loki, you were able to do that easily by opening the sound panel. In Juno, the option is no longer there.&lt;/p&gt;&#xA;" OwnerUserId="15443" LastActivityDate="2019-03-31T10:32:36.547" Title="Turning up the volume past the maximum in Juno" Tags="|release-juno|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18612" PostTypeId="2" ParentId="18611" CreationDate="2019-03-31T10:32:36.547" Score="3" Body="&lt;p&gt;The command for that is &lt;code&gt;gsettings set io.elementary.desktop.wingpanel.sound max-volume 150&lt;/code&gt;. You may need to log out for this to take effect.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also take into account that this is going to cause distortion since it's going to increase the volume over 100%.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-03-31T10:32:36.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18613" PostTypeId="1" CreationDate="2019-03-31T17:39:08.810" Score="1" ViewCount="23" Body="&lt;p&gt;The system spell checking on my installation of elementary OS (Juno) is set to UK English (e.g. &quot;organise&quot;, instead of &quot;organize&quot;), perhaps because I installed it while I was outside of the US. I have changed the language on my account to US English and logged out and back in, but the spell-checker is still set to UK English. How can I change the spell-checking language?&lt;/p&gt;&#xA;" OwnerUserId="17787" LastActivityDate="2019-03-31T17:39:08.810" Title="Change spell checking from UK to US English" Tags="|release-juno|language|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18615" PostTypeId="1" CreationDate="2019-04-01T07:52:05.283" Score="0" ViewCount="325" Body="&lt;p&gt;I had installed programs under WINE Tricks, which I removed again. Unfortunately the icons are still in the wingpanel. Where can I find the wingpanel menu file, so that i can delete the corresponding entries. I also want to add an entry manually (my special scanner program).&lt;/p&gt;&#xA;" OwnerUserId="17642" LastEditorUserId="16827" LastEditDate="2019-04-07T04:39:27.523" LastActivityDate="2023-12-12T21:06:55.827" Title="Adding and deleting entries from wingpanel" Tags="|wingpanel|wine|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18616" PostTypeId="2" ParentId="14521" CreationDate="2019-04-01T08:26:36.220" Score="1" Body="&lt;p&gt;I know there is a &lt;a href=&quot;https://elementary.io/de/docs/code/reference#saving-window-state&quot; rel=&quot;nofollow noreferrer&quot;&gt;way&lt;/a&gt; for an elementary app developer to store the last window state together with the window position. For telegram though I don't know how they handle their last known window position.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although I am not so deep into gnome development I can only guess that the window position storage has to actively implement for each app itself and can't be mangage via a general gsettings command. Well, at least I am not aware of any schema for elementary OS that will do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you might want to create an isssue on the telegrams &lt;a href=&quot;https://github.com/telegramdesktop/tdesktop/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;github repository&lt;/a&gt;, maybe they are a bit more of help here :-)&lt;/p&gt;&#xA;" OwnerUserId="15856" LastActivityDate="2019-04-01T08:26:36.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18617" PostTypeId="1" CreationDate="2019-04-01T10:30:01.563" Score="1" ViewCount="39" Body="&lt;p&gt;I recently upgarded to elementary os juno. I had a few bugs that i sorted out but one that I can't figure out is trying to attach a file in email. When i click the &quot;attach file&quot; icon, the files window pops up and i can select a file but cannot attach it. The window doesn't have a button to allow me to add the file. It also doesn't have the close, minimize, and maximize icons. I have to press &quot;esc&quot; to close it. Anyone experiencing the same could maybe help me out here.Thanks.&lt;/p&gt;&#xA;" OwnerUserId="17789" LastEditorUserId="17789" LastEditDate="2019-04-01T10:37:14.980" LastActivityDate="2019-04-01T10:37:14.980" Title="Cannot attach file to email in elementary os 5.0 juno" Tags="|release-juno|ubuntu|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18618" PostTypeId="2" ParentId="17861" CreationDate="2019-04-01T10:49:18.810" Score="0" Body="&lt;p&gt;Short answer (if this was your question): Yes it is possible to mount the user folder, system folders etc. on different disks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all for a better understanding of the directory structure:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/bin : All the executable binary programs (file) required during booting, repairing, files required to run into single-user-mode, and other important, basic commands viz., cat, du, df, tar, rpm, wc, history, etc.&#xA;/boot : Holds important files during boot-up process, including Linux Kernel.&#xA;/dev : Contains device files for all the hardware devices on the machine e.g., cdrom, cpu, etc&#xA;/etc : Contains Application’s configuration files, startup, shutdown, start, stop script for every individual program.&#xA;/home : Home directory of the users. Every time a new user is created, a directory in the name of user is created within home directory which contains other directories like Desktop, Downloads, Documents, etc.&#xA;/lib : The Lib directory contains kernel modules and shared library images required to boot the system and run commands in root file system.&#xA;/lost+found : This Directory is installed during installation of Linux, useful for recovering files which may be broken due to unexpected shut-down.&#xA;/media : Temporary mount directory is created for removable devices viz., media/cdrom.&#xA;/mnt : Temporary mount directory for mounting file system.&#xA;/opt : Optional is abbreviated as opt. Contains third party application software. Viz., Java, etc.&#xA;/proc : A virtual and pseudo file-system which contains information about running process with a particular Process-id aka pid.&#xA;/root : This is the home directory of root user and should never be confused with ‘/‘&#xA;/run : This directory is the only clean solution for early-runtime-dir problem.&#xA;/sbin : Contains binary executable programs, required by System Administrator, for Maintenance. Viz., iptables, fdisk, ifconfig, swapon, reboot, etc.&#xA;/srv : Service is abbreviated as ‘srv‘. This directory contains server specific and service related files.&#xA;/sys : Modern Linux distributions include a /sys directory as a virtual filesystem, which stores and allows modification of the devices connected to the system.&#xA;/tmp :System’s Temporary Directory, Accessible by users and root. Stores temporary files for user and system, till next boot.&#xA;/usr : Contains executable binaries, documentation, source code, libraries for second level program.&#xA;/var : Stands for variable. The contents of this file is expected to grow. This directory contains log, lock, spool, mail and temp files.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;During a new installation choose custom install and create a new partition with the mounting point /home on your hdd.&#xA;For the ssd choose '/' as a mounting point.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To backup and restore your programs you can follow this &lt;a href=&quot;https://blog.sleeplessbeastie.eu/2013/09/25/how-to-backup-and-restore-installed-packages/&quot; rel=&quot;nofollow noreferrer&quot;&gt;guide&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps a bit...&lt;/p&gt;&#xA;" OwnerUserId="15856" LastActivityDate="2019-04-01T10:49:18.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18619" PostTypeId="2" ParentId="18163" CreationDate="2019-04-01T10:53:54.603" Score="0" Body="&lt;p&gt;You might want to post your issue &lt;a href=&quot;https://github.com/elementary/calendar/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; :-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Sorry @Hasan you are right, of course! For better clarification why I post this link and to give a more valuable answer here comes an explanation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A fail of sync can have many reasons. In this case it maybe is a problem of the client (which in this case is the elementary calendar app), because I can sync my owncloud (10.1.0) with thunderbird lightning and I hadn't any problems beforehand. Still it can be an issue of your server configuration though. However, I am not an expert in this so thats why I posted the link above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The link I posted above will redirect you the offical github repository of the elementary calendar app. The Github repository holds the open source code of the app and provides an issue tracker. Posting an issue there is a great help for developers, especially when a user can provide a log.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For posting an issue in an elementary repository there are some things you can do things easier for everyone:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;First check if there is a similar or even the same issue already posted&lt;/li&gt;&#xA;&lt;li&gt;If so you can give a thumb up in the error description to mark that you have exactly the same issue &lt;a href=&quot;https://i.stack.imgur.com/sBooJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sBooJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add valuable information, maybe an additional description which also triggers the issue, provide logs&lt;/li&gt;&#xA;&lt;li&gt;If not: Try to provide a description that makes it easy for devs to recreate the problem, provide logs and a system configuration.&lt;/li&gt;&#xA;&lt;li&gt;Be nice and patient :-)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="15856" LastEditorUserId="15856" LastEditDate="2019-04-02T10:03:17.640" LastActivityDate="2019-04-02T10:03:17.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18621" PostTypeId="1" CreationDate="2019-04-02T02:47:54.827" Score="2" ViewCount="24" Body="&lt;p&gt;After updating my Elementary upon clicking Suspend, it starts, but does not suspend and returns alone. &#xA;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="17792" LastActivityDate="2019-04-02T02:47:54.827" Title="Suspend returns alone, why?" Tags="|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18624" PostTypeId="1" CreationDate="2019-04-03T01:19:09.447" Score="2" ViewCount="79" Body="&lt;p&gt;I’m visually impaired and am really liking elementary OS.  With that said, I am aware that eOS has a built-in zoom function (via super and +/-), however, I’m wondering if it is possible to change the factor at witch this increases and decreases.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Turns out I’m pretty blind yall!  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I’m actually a computer science major, needless to say, I’m familiar with computers.  Perhaps, if someone can tell me what to change, I’d be happy to change whatever it is that controls the max in and max out.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I imagine I’ll have to do something with the terminal, as long as I know what, and where, needs modification, I’m sure I can do it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17797" LastActivityDate="2019-05-06T00:55:15.080" Title="Is it possible to change the magnifier factor?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18625" PostTypeId="1" CreationDate="2019-04-03T12:00:07.687" Score="1" ViewCount="364" Body="&lt;p&gt;I just installed elementary on my new laptop besides the Windows 10 boot it came with. Problem now is, wireless connectivity isn't working. After looking into multiple threads regarding the problem, I've figured it's probably missing drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The thing is though, this laptop has no ethernet port. Is there anyway to install the drivers via an USB flash drive? Can anyone with experience help out?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci: &lt;code&gt;Network controller: Realtek Semiconductor Co., Ltd. Device b822&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17799" LastActivityDate="2019-04-03T12:00:07.687" Title="How to install wireless drivers via USB?" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18626" PostTypeId="2" ParentId="18366" CreationDate="2019-04-03T18:43:54.880" Score="1" Body="&lt;p&gt;It can be accomplished with a standard e-mail signature that will be appended to the end of the e-mail message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's how: go to Accounts (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;M&lt;/kbd&gt;), click the account you want the signature on, click the edit icon at the bottom, under the composer section check the box for &quot;Sign e-mails&quot;, then fill in whatever you would like it to say, then click Save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check it my writing a new message.  The signature should already be at the end of the message.&lt;/p&gt;&#xA;" OwnerUserId="17803" LastEditorUserId="16827" LastEditDate="2019-04-07T04:24:32.140" LastActivityDate="2019-04-07T04:24:32.140" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18627" PostTypeId="1" CreationDate="2019-04-04T00:47:11.667" Score="0" ViewCount="51" Body="&lt;p&gt;I am new to Linux distributions and have just installed Elementary Juno 5.0 on Lenovo T420. The bluetooth is working fine except that when I switch it off from the top system tray on the screen, the bluetooth indicator on the laptop deck is still on. The same is not happening for wi-fi (bluetooth and wi-fi are operated from the same modem?). This is not affecting any functionality, but in Windows switching off bluetooth from wireless manager would turn off the indicator too. Is there a solution? &lt;/p&gt;&#xA;" OwnerUserId="17804" LastActivityDate="2019-04-04T00:47:11.667" Title="Bluetooth stays on after switching off" Tags="|bluetooth|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18629" PostTypeId="2" ParentId="17350" CreationDate="2019-04-04T22:00:37.937" Score="0" Body="&lt;p&gt;To troubleshoot your connection open the Terminal and use the &lt;a href=&quot;https://linux.die.net/man/8/ping&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;ping&lt;/code&gt;&lt;/a&gt; command as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ping google.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please add the output to your question. If the ping is successful, you should see something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ping google.com&#xA;PING google.com(ham04s01-in-x0e.1e100.net (2a00:1450:4005:80a::200e)) 56 data bytes&#xA;64 bytes from ham04s01-in-x0e.1e100.net (2a00:1450:4005:80a::200e): icmp_seq=1 ttl=48 time=25.8 ms&#xA;64 bytes from ham04s01-in-x0e.1e100.net (2a00:1450:4005:80a::200e): icmp_seq=2 ttl=48 time=26.4 ms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This means your browser might be the problem. Instead of the default web browser, try to use Firefox or Chrome and check if the problem persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the ping is &lt;em&gt;not&lt;/em&gt; successful, try to &lt;a href=&quot;https://linux.die.net/man/8/ping&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;ping&lt;/code&gt;&lt;/a&gt; a well known IP adress like &lt;code&gt;1.1.1.1&lt;/code&gt; or &lt;code&gt;8.8.8.8&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ping 8.8.8.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please add the output to your question. If the ping is successful, you should see something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ping 8.8.8.8&#xA;PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.&#xA;64 bytes from 8.8.8.8: icmp_seq=1 ttl=50 time=25.5 ms&#xA;64 bytes from 8.8.8.8: icmp_seq=2 ttl=50 time=26.6 ms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This probably means, there is a problem with DNS resolving. To confirm, try &lt;a href=&quot;https://linux.die.net/man/1/nslookup&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;nslookup google.com&lt;/code&gt;&lt;/a&gt; and add the output to your question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the ping is &lt;em&gt;not&lt;/em&gt; successful, run the command &lt;a href=&quot;https://linux.die.net/man/8/ifconfig&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;ifconfig&lt;/code&gt;&lt;/a&gt; and add the output to your question, so we can try to troubleshoot further.&lt;/p&gt;&#xA;" OwnerUserId="68" LastActivityDate="2019-04-04T22:00:37.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18630" PostTypeId="1" CreationDate="2019-04-04T22:34:41.810" Score="2" ViewCount="86" Body="&lt;p&gt;I installed eOS on an &lt;code&gt;HP Envy x360 Convertible 13-y0xx&lt;/code&gt;. Bluetooth is doing something strange. If I'm connected to my Bluetooth headsets, open YouTube through Epiphany, everything sounds normal. But if I open YouTube through Firefox it plays the audio through the laptop speakers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's where it gets crazy. I can play an MP3 song through eOS's music player at the same time I'm playing a video on YouTube through Firefox and I can hear both Bluetooth audio AND the laptop's audio playing at the same time. They're both active. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After fiddling around with the settings and installing Blueman, I got this notification. I don't know if this has anything to do with it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WUwYx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WUwYx.png&quot; alt=&quot;Notification of Bluetooth connected via serial port&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17811" LastEditorUserId="11882" LastEditDate="2020-05-07T12:30:43.533" LastActivityDate="2024-02-16T22:07:05.833" Title="Bluetooth and laptop speakers working at the same time" Tags="|sound|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18631" PostTypeId="1" AcceptedAnswerId="18635" CreationDate="2019-04-04T22:56:55.977" Score="0" ViewCount="109" Body="&lt;p&gt;I keep getting a notification that an update is available, but for some reason I  can't find where this update is. I checked all the apps in the app center and none indicate an update is available. Just before this happened I unintentionally uninstalled the app center, I reinstalled it and that is when I got the notification. Then restarted the pc and it gave me the notification again. I tried sudo apt update/upgrade and found a package for amd 64 which might have something to do with my cpu, but I don't think that is something that this OS (JUNO) would notify me of. &lt;/p&gt;&#xA;" OwnerUserId="17772" LastEditorUserId="16827" LastEditDate="2019-04-05T06:01:37.217" LastActivityDate="2019-04-05T06:19:28.823" Title="Is there an update button?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18632" PostTypeId="2" ParentId="18609" CreationDate="2019-04-05T03:51:18.653" Score="1" Body="&lt;p&gt;I have a fork of wingpanel with &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/93&quot; rel=&quot;nofollow noreferrer&quot;&gt;autohide&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unless you are using Archlinux, clone the &lt;a href=&quot;https://github.com/quequotion/wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;git repository&lt;/a&gt;, then build and install according to the README.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Archlinux, it is packaged in the AUR: &lt;a href=&quot;https://aur.archlinux.org/packages/wingpanel-standalone-git/&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel-standalone-git&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2019-04-05T03:51:18.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18633" PostTypeId="2" ParentId="18591" CreationDate="2019-04-05T04:04:13.107" Score="1" Body="&lt;p&gt;VLC uses &lt;a href=&quot;https://www.libav.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;libav&lt;/a&gt; (also backend to ffmpeg), which can decode just about any type of digital audio or video format.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think Videos is using &lt;a href=&quot;https://gstreamer.freedesktop.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gstreamer&lt;/a&gt;, which needs individual codecs to handle each format. Most of these come in the packages gstreamer-plugins-good, gstreamer-plugins-bad, and gstreamer-plugins-ugly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing those three should cover most everything you need.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2019-04-05T04:04:13.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18635" PostTypeId="2" ParentId="18631" CreationDate="2019-04-05T06:19:28.823" Score="3" Body="&lt;p&gt;Please open &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; and click on Installed tab and you'll see the updates available. And please do installed updates they are necessary. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-05T06:19:28.823" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18636" PostTypeId="2" ParentId="16031" CreationDate="2019-04-05T10:28:12.413" Score="0" Body="&lt;p&gt;There are multiple reasons. One is that elementary uses a lot more animations and transparency. However, that not the whole picture. Also debian is a lot more conservative in design of there system. However, I like the UX of elementary a lot. ;-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well I know you already stumbled upon powertop you might want to give this another try. Did you use the report function already?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For those who running into similar power consumption issues and don't know the tool yet, here is short description on how to install powertop:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install the tool open a terminal (&lt;kbd&gt;SUPER&lt;/kbd&gt; + &lt;kbd&gt;T&lt;/kbd&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install powertop &#xA;sudo powertop --calibrate &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The calibration can take up to one hour. Don't use your laptop during the process to get the best results.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo powertop --auto-tune&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Set the optimized parameters automatically. Keep in mind,these settings are not permanent. The system will reset back to “Bad” power performance after restarting the machine.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo powertop --html=power_report.html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;powertop will create a report in the power_report.html listing the top power consumers. Maybe there is a tool that points out. Good luck!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Powertop is a really complex tool. You can take a look on the user guide &lt;a href=&quot;https://01.org/powertop/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15856" LastActivityDate="2019-04-05T10:28:12.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18637" PostTypeId="2" ParentId="18615" CreationDate="2019-04-05T14:50:54.940" Score="0" Body="&lt;p&gt;I think you're referring to &quot;Desktop Entries&quot;. They are located in /usr/share/applications (for applications you install through the package manager) and in ~/.local/share/applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can delete these with the filemanager. Open &quot;Files&quot; from the start menu. Then enter ~/.local/share/applications in the pathbar and hit enter. This should contain the corresponding files, but it doesn't show their title, just the filename. To check which is which you can open them in any text editor (right click -&gt; Open with).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for creating new entries, I'd like to refer you to this &lt;a href=&quot;https://askubuntu.com/questions/281293/creating-a-desktop-file-for-a-new-application&quot;&gt;question on AskUbuntu&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15702" LastActivityDate="2019-04-05T14:50:54.940" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18638" PostTypeId="1" CreationDate="2019-04-05T19:27:53.597" Score="0" ViewCount="75" Body="&lt;p&gt;Well I'm realy new in Linux and I install Elementary os juno but. I have a problem i cant use wifi in win 10 it was no problem but I realy want to use my notebook with wifi and not with an Lan cable. I'm now Search for days an a solution but all other dont help me. What can I do ??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and sorry for double posting the same question again the first time I post it as a guest and can't comment to people :( And if is not realy clear I have definitely a problem with elementary and not with windows, because I delete the hole ssd to Install elemantary.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my realy bad english  &lt;/p&gt;&#xA;" OwnerUserId="17810" LastActivityDate="2019-04-07T04:30:09.737" Title="Wifi still dont work after a new fresh install" Tags="|wifi|networking|internet|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18639" PostTypeId="2" ParentId="11367" CreationDate="2019-04-05T23:12:35.037" Score="0" Body="&lt;p&gt;For my small company, the Dell XPS 13's are a great fit but don't come with Linux on the cutting edge touchscreens / etc.   Linux / elementary / manjaro / ubuntu are all best for our engineers and GIS crew, but there still remain some industry-specific software we need windows for (Pix4d).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;We've finally perfected the dual boot installation process after destroying and reinstalling too many OS's... here's what we do....  &lt;em&gt;Most used machine: Dell XPS 13, Windows 10 already installed, no linux yet, often we use Elementary OS&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The Definitive XPS 13 dual-boot how to :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make sure Linux USB boot image is created using WINDOWS (so it boots UEFI style, we use Rufus)&lt;/li&gt;&#xA;&lt;li&gt;Windows Partition Manager --&gt; shrink so unallocated space is available for Linux&lt;/li&gt;&#xA;&lt;li&gt;Windows Settings --&gt; Power Options --&gt; Advanced --&gt; Change what power button does --&gt; Allow changes to settings --&gt; turn off fastboot&lt;/li&gt;&#xA;&lt;li&gt;Run 'msconfig' --&gt; boot tab --&gt; safe mode to ON&lt;/li&gt;&#xA;&lt;li&gt;Restart, enter BIOS and switch RAID to AHCI (use &lt;em&gt;f2&lt;/em&gt; on dell logo)&lt;/li&gt;&#xA;&lt;li&gt;Restart and windows will boot in Safe mode&lt;/li&gt;&#xA;&lt;li&gt;Run msconfig again and unselect safe mode&lt;/li&gt;&#xA;&lt;li&gt;Restart, insert USB &lt;em&gt;the moment&lt;/em&gt; the computer power toggles&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;F2&lt;/em&gt; again into bios settings, make sure boot sequence is USB first, Windows second&lt;/li&gt;&#xA;&lt;li&gt;Apply and exit&lt;/li&gt;&#xA;&lt;li&gt;Allow system to boot from and install Linux&lt;/li&gt;&#xA;&lt;li&gt;When installer asks about 'partition' --&gt; 'boot alongside windows'&lt;/li&gt;&#xA;&lt;li&gt;let installer do the rest&lt;/li&gt;&#xA;&lt;li&gt;Restart&lt;/li&gt;&#xA;&lt;li&gt;You're done.  Choose OS and go.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17817" LastActivityDate="2019-04-05T23:12:35.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18640" PostTypeId="1" AcceptedAnswerId="21296" CreationDate="2019-04-06T09:56:47.653" Score="3" ViewCount="514" Body="&lt;p&gt;I am new in elementary os. Previously I was using Windows 10. I am trying to be used to in elementary os. I have to write some of my documents in Bangla language. Is it possible to get avro or any other phonetic Bangla keyboard to write down Bangla more easily?&lt;/p&gt;&#xA;" OwnerUserId="17822" LastEditorUserId="18588" LastEditDate="2019-07-20T17:35:46.650" LastActivityDate="2019-11-30T14:11:17.343" Title="How to install and use Avro keyboard in Elementary OS 5.0 Juno?" Tags="|keyboard|language|ibus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18641" PostTypeId="2" ParentId="18630" CreationDate="2019-04-06T13:16:37.077" Score="0" Body="&lt;p&gt;you can try to install PulseAudio volume control from the app center and then change the profile in configuration and the output device&lt;/p&gt;&#xA;" OwnerUserId="17776" LastActivityDate="2019-04-06T13:16:37.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18650" PostTypeId="1" CreationDate="2019-04-07T22:38:13.757" Score="0" ViewCount="193" Body="&lt;p&gt;Does anyone know why this is happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uplSE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uplSE.png&quot; alt=&quot;Fuzzy purple mess&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17833" LastActivityDate="2019-04-08T15:14:21.987" Title="Videos not playing correctly with Epiphany" Tags="|release-juno|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18651" PostTypeId="1" CreationDate="2019-04-08T08:44:35.520" Score="2" ViewCount="972" Body="&lt;p&gt;Lenovo X1 Carbon internal 14&quot; hidpi display (2560x1440) &#xA;Two external Samsung 27&quot; lodpi displays (2560x1440)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No matter if I use auto, HiDPI and LoDPI the result is that if the internal screen is used the two external displays use huge icons/fonts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Ubuntu I used LoDPI and set the resolution of the internal screen to 1920x1080, but in Juno the two external displays still have wrong scaling regardless of resoultion on HiDPI display.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've seen other posts on this for Loki. But I feel that the HiDPI/LoDPI setting is ignored in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried running: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;[{'Gdk/WindowScalingFactor', &amp;lt;1&amp;gt;}]&quot;&#xA;xrandr --output eDP-1 --mode 1920x1080  --output DP-2-1 --auto --scale 1x1 --right-of eDP-1 --output DP-2-2 --auto --scale 1x1 --right-of DP-2-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which gets me close, but notifications and cursor is still scaled, even if the rest is not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any other tips?&lt;/p&gt;&#xA;" OwnerUserId="17835" LastEditorUserId="17835" LastEditDate="2019-04-08T08:55:24.973" LastActivityDate="2019-04-08T08:55:24.973" Title="Mixing HiDPI and LoDPI screens on Elemtary OS 5 Juno" Tags="|release-juno|display|hidpi|mixed-dpi|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18652" PostTypeId="2" ParentId="18650" CreationDate="2019-04-08T15:14:21.987" Score="2" Body="&lt;p&gt;Looks like a hardware-specific issue, probably related to graphics drivers. I've seen several complaints about this, but nobody has reported a bug yet, and developers won't investigate without a bug report. So I would take this straight to WebKit Bugzilla, following the &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/blob/master/CONTRIBUTING.md#web-content-bugs&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructions for reporting web content bugs&lt;/a&gt;. You'll probably be asked to provide details of your graphics hardware and drivers, but no need to worry about that until you're asked for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, if you happen to have gstreamer1.0-vaapi installed, definitely try uninstalling it to see if vaapi is to blame.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-04-08T15:14:21.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18653" PostTypeId="1" AcceptedAnswerId="18778" CreationDate="2019-04-08T15:20:06.140" Score="0" ViewCount="214" Body="&lt;p&gt;It is my last week at my current workplace. I use Elementary OS on my working PC where I have a lot of personal information. I want to fully erase OS from this PC without installation of any another OS.&lt;/p&gt;&#xA;" OwnerUserId="12150" LastActivityDate="2019-04-20T16:50:21.837" Title="How to delete Elementary OS without another OS installation?" Tags="|release-loki|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18656" PostTypeId="1" CreationDate="2019-04-08T16:39:47.340" Score="1" ViewCount="2358" Body="&lt;p&gt;i want to factory reset elementary os system. How to make it? please help me&lt;/p&gt;&#xA;" OwnerUserId="17838" LastEditorUserId="16827" LastEditDate="2019-04-09T03:42:24.963" LastActivityDate="2019-04-12T13:24:53.227" Title="How to Factory reset Elementary OS Juno" Tags="|release-juno|system|" AnswerCount="1" CommentCount="1" ClosedDate="2019-04-17T18:29:01.947" ContentLicense="CC BY-SA 4.0" />
  <row Id="18658" PostTypeId="6" CreationDate="2019-04-09T03:00:25.047" Score="0" Body="&lt;p&gt;Hi! I am Hasan, a computer science undergraduate. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the small list of my favorite Linux distributions, elementary OS is one. I am  actually new to the OS, maybe 3 to 4 months but I try to keep up with the forum to know what's been going with it and its users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like helping people. I spend most of my time sitting in front of my computer screens, so I have chosen tech forums where I can help people to solve their problems. It's been a while I am contributing in forums. I have been a contributor in Microsoft Community too. I was also asked to join as a community manager in a local tech community when I was in class 12. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also like to play games and code but the most i like is to play with Linux command-line. Yeah as a matter of fact I also use command in Windows more than the GUI. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, that's all. May the deserved ones gets elected.&lt;br&gt;&#xA;Have a nice day.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-09T03:00:25.047" LastActivityDate="2019-04-09T03:00:25.047" CommentCount="0" CommunityOwnedDate="2019-04-09T03:00:25.047" ContentLicense="CC BY-SA 4.0" />
  <row Id="18659" PostTypeId="1" CreationDate="2019-04-09T09:15:29.423" Score="2" ViewCount="393" Body="&lt;p&gt;Sometimes when i shut Down then the shutdowns takes time and when I open the Os next time it does not o[pen it shows the elementary OS logo and the logo flickers or the some random stuffs which have in brackets OK like this &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[OK] some words&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then I shutdown by holding power button and then open again .The system boots after some attempts .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last time when I shutdown I had one node process running and i Just clicked on shutdown icon and then shutdown . But this may not be the case all time .&#xA;I had found one answer but it says that the problem is solved in kernel   version 4.15.0-42-generic but i am running Linux 4.15.0-47-generic &lt;br&gt; &lt;a href=&quot;https://elementaryos.stackexchange.com/a/17607/17742&quot;&gt;here is the answer&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BZFeW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BZFeW.jpg&quot; alt=&quot;here the error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lBl7Y.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lBl7Y.jpg&quot; alt=&quot;it just repeating&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17742" LastEditorUserId="17742" LastEditDate="2019-04-17T04:22:07.030" LastActivityDate="2019-05-30T00:08:22.010" Title="Taking time on Shutdown and when boot after that then the just logo flashes" Tags="|release-juno|boot|shutdown|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18660" PostTypeId="2" ParentId="18121" CreationDate="2019-04-09T12:45:00.807" Score="1" Body="&lt;p&gt;You can try the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open im-config through terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo im-config&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bXHQd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bXHQd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;click OK button to go next&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Click Yes to update system config.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hldMg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hldMg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select Ibus as input method for the system&#xA;&lt;a href=&quot;https://i.stack.imgur.com/OhpUy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OhpUy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click Ok and Ok for the next windows. Then restart your computer.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;sudo&lt;/code&gt; at step 1 is crucial. Without &lt;code&gt;sudo&lt;/code&gt; the system just uses the default setting regardless of what you have chosen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also make &lt;code&gt;ibus-daemon&lt;/code&gt; auto start with the system by:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Applications&lt;/code&gt; &gt; &lt;code&gt;Startup&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then add a custom command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ibus-daemon -drx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17841" LastEditorUserId="17841" LastEditDate="2019-04-09T12:55:13.913" LastActivityDate="2019-04-09T12:55:13.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18661" PostTypeId="1" CreationDate="2019-04-09T12:46:08.433" Score="1" ViewCount="26" Body="&lt;p&gt;I've been using Juno for a few months, about 3 weeks ago this issue occurs out of the blue, all media keys don't work, same for custom shortcuts. until I reassign them again from &lt;code&gt;tweaks&lt;/code&gt; or &lt;code&gt;dconf-editor&lt;/code&gt;. but I'm back to square one after shutdown/reboot.&lt;/p&gt;&#xA;" OwnerUserId="16468" LastActivityDate="2019-04-09T12:46:08.433" Title="button mapping/shortcuts gets reset after shout down" Tags="|keyboard-shortcuts|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18662" PostTypeId="1" CreationDate="2019-04-09T17:27:01.917" Score="0" ViewCount="198" Body="&lt;p&gt;&lt;strong&gt;elementary OS 5.0 Juno&lt;/strong&gt;&lt;br&gt;&#xA;&lt;strong&gt;Files 4.1.7&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Drag on newly copied files doesn't seem to work and have to close and relaunch the Files application to get it back to working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Steps to reproduce:&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy a file and paste it anywhere else and try dragging it.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried with double tap on touchpad, holding right click and drag. &lt;/p&gt;&#xA;" OwnerUserId="17843" LastActivityDate="2019-05-22T17:57:28.767" Title="Drag and Drop doesn't work on newly copied files" Tags="|release-juno|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18663" PostTypeId="1" CreationDate="2019-04-09T19:04:51.667" Score="0" ViewCount="19" Body="&lt;p&gt;When I start apps that require sudo access (gparted, software installations etc) the password prompt often comes up &quot;read-only&quot;. I cannot set focus in the textbox and type anything. I have to quit the app and try again, sometimes 2-3 times before I can type in the password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vBjCU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vBjCU.png&quot; alt=&quot;Password dialog read-only&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17835" LastActivityDate="2019-04-09T19:04:51.667" Title="Password prompt for sudo apps often read-only" Tags="|release-juno|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18664" PostTypeId="1" AcceptedAnswerId="18918" CreationDate="2019-04-09T19:24:54.207" Score="2" ViewCount="398" Body="&lt;p&gt;Playing a video with mpv (installed via apt from standard repositories) doesn't work with hardware acceleration. mpv reports:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;VO does not support requested hardware decoder, or loading it failed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;vdpau reports:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;display: :0   screen: 0&#xA;GPU at BusId 0x1 doesn't have a supported video decoder&#xA;Error creating VDPAU device: 1&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Corresponding packages installed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;libnvidia-decode-390/bionic-updates,bionic-security,now 390.116-0ubuntu0.18.04.1 amd64 [installed,automatic]&#xA;libvdpau1/bionic,now 1.1.1-3ubuntu1 amd64 [installed,automatic]&#xA;mesa-vdpau-drivers/bionic-updates,now 18.2.8-0ubuntu0~18.04.2 amd64 [installed,automatic]&#xA;vdpau-driver-all/bionic,now 1.1.1-3ubuntu1 amd64 [installed,automatic]&#xA;vdpauinfo/bionic,now 1.0-3 amd64 [installed]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using eOS 5.0 Juno, with an NVIDIA Optimus notebook. NVIDIA drivers are installed, and the error is present whether I'm using the discreet graphics or not. Is there any way to make this work?&lt;/p&gt;&#xA;" OwnerUserId="17845" LastActivityDate="2019-05-07T10:00:53.877" Title="Hardware aceleration doesn't work (at least with mpv)" Tags="|nvidia|graphics|release-juno|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18665" PostTypeId="1" CreationDate="2019-04-10T09:44:08.533" Score="1" ViewCount="56" Body="&lt;p&gt;Hello everyone im running elementary OS 5.0 Juno Linux 4.15.0-47-generic, GTK+ 3.22.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded about a week &lt;a href=&quot;https://github.com/elfenware/badger&quot; rel=&quot;nofollow noreferrer&quot;&gt;Badger&lt;/a&gt; 1.3.0. I uninstalled the app but I still get notifications from the app as if the app is still installed. The only difference is that now its labelled as &quot;Others&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't find a way to stop the notifications for this app &lt;/p&gt;&#xA;" OwnerUserId="17849" LastActivityDate="2019-04-10T09:44:08.533" Title="Getting notifications from a deleted app" Tags="|settings|applications|appcenter|notifications|notification-badge|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18666" PostTypeId="1" AcceptedAnswerId="18667" CreationDate="2019-04-10T13:36:08.350" Score="0" ViewCount="157" Body="&lt;p&gt;(Second Edit: I am an idiot and the problem never really existed - i read the interface of the AppCenter wrong. I couldn't type in zero on the update page for Agenda because it already has been updated and the interface was only for later payment, that is still 100% freely and not required. Agenda is first in line after the Nvidia drivers ... so ... i am really sorry right now! Still i learned a lot of things on the way. Also got an insight why stripe. And maybe all this will be good for something one day. Like for example a super easy and nice way to pay for credit card less people all over the world.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(First Edit: Edited the text because former EC Cards got a rebranding to Giro Card in 2007, didn't know that, things you learn, i knew both names, didn't know one isn't official anymore ^^) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all i am definitely a supporter for your effort to rise awareness that people are working for open source software and even as it is free, it deserves to be supported. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also supported elementary Os and it's apps before, because elementary is my go to Linux distribution (big thank you) and usually i pay those open source project that i am using regularly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So in theory the app center payment could be convenient way to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Except it isn't. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So when it comes to money Germans are quite different and quite stubborn. Credit Cards are not famous around here at all. And i am personally have no wish for having one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not against progress or anything. But around here cash is still one of the most famous ways to pay. The other one are Giro Cards. Of course credit cards exist around here as well. But no one feels the need to have one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reasons are Germans are more privacy concerned than other cultures for historical reasons and even if people can avoid it to pay via Giro Card they will always pay cash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Due to the unpopularity of credit cards in our culture, and my personal not existing interest to get one, the app center payment doesn't work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So than the problem starts with the app &quot;Agenda&quot; which is quite simple and neat. And can't be updated anymore without payment. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i want to pay apps, but i don't want to use a credit card. Especially i don't like to be forced to get one in the first place. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far i type in 0 for every app and would spend money directly via paypal if i want to. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it's not my favored way and i would so much more like it uncomplicated and easy as the app center payment is meant to be. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I understand if you got any concerns about pay pal in general. But on the other side you use it on your homepage for the os download. And you could use a compareable alternative if it exists. I pay everything in the internet with paypal. So i haven't been looking for alternatives yet. But i would be willing to use one for elementary. Also to integrate the Giro Card system might be quite complicated and well, i really don't ask for it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If apps in the future will have a kind of minimum price of 1 dollar / euro whatever, i don't mind it and it's fair enough. But the system will get unusable for me that way. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And Agenda is not update-able for me already. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't wanted to lecture anybody. Giro Cards are certainly as bad for privacy as credit cards. I don't know if credit cards that much more insecure than some Germans have the impression they might be. We simply have a culture where there is no need for credit cards. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I only wanted to point out that in Germany we are far away from &quot;everybody has a credit card&quot; for national taste. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So i would really ask for an alternative payment method. For reasons above. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there are ways around that problem already, i would love to hear it. I haven't found it myself. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for the long text as well. &lt;/p&gt;&#xA;" OwnerUserId="17850" LastEditorUserId="17850" LastEditDate="2019-04-16T15:36:09.927" LastActivityDate="2019-04-16T15:36:09.927" Title="Can't update Agenda anymore because of minimum price. - Where i live Credit Cards are unpopular and i also don't care to get one" Tags="|appcenter|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="18667" PostTypeId="2" ParentId="18666" CreationDate="2019-04-10T20:29:01.253" Score="3" Body="&lt;p&gt;Though this won't exactly solve your problem, you might want to check out a prepaid credit card for these purposes. Sharing your background (being a German myself and so far lacking a credit card as well) I've been through this a couple of times already. Statement so far was that elementary essentially relies upon stripe.com for handling payments and so is limited to supporting payment methods supported by stripe. Maybe you might want to add yourself to feature requests in the relevant github repo, especially&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/280&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/280&lt;/a&gt;  (paypal support)&#xA;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/315&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/315&lt;/a&gt;  (paysafe support).&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2019-04-10T20:29:01.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18668" PostTypeId="1" CreationDate="2019-04-11T00:58:36.483" Score="1" ViewCount="52" Body="&lt;p&gt;As i am new to Linux, I don't know how big this problem is. Can anybody help me out. (if you are free please explain the problem what it was ?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XBSuC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XBSuC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17855" LastEditorUserId="16827" LastEditDate="2019-04-11T05:39:11.507" LastActivityDate="2019-04-23T19:25:08.460" Title="Hash sum mismatch error on update" Tags="|updates|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2019-04-24T13:18:59.083" ContentLicense="CC BY-SA 4.0" />
  <row Id="18669" PostTypeId="1" AcceptedAnswerId="18670" CreationDate="2019-04-11T08:43:49.947" Score="2" ViewCount="1476" Body="&lt;p&gt;After a new clean installation of Juno I tried to enable Night light with the automatic sunrise/sunset timing. This did not work as expected. What did happen was, that night light kicked in only at the (previously) designated manual times. You can try to switch to manual and change the times, and this setting will stick even after changeing the switch to &quot;sunrise/sunset&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a similar problem with Ubuntu that I know of - if a user selects the same option in gnome-settings, but does not enable Location services (in a separate settings panel), the functionality won't work. Unfortunately enabling location services in elementary switchboard doesn't solve this issue in eOS. This should be addressed by the devs.&lt;/p&gt;&#xA;" OwnerUserId="17845" LastEditorUserId="15904" LastEditDate="2019-04-12T13:22:48.127" LastActivityDate="2020-12-20T22:13:55.173" Title="Night light sunrise/sunset not working" Tags="|settings|release-juno|nightlight|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18670" PostTypeId="2" ParentId="18669" CreationDate="2019-04-11T09:20:13.487" Score="6" Body="&lt;p&gt;As an interim solution you can install &lt;em&gt;dconf-editor&lt;/em&gt; and change the key &lt;code&gt;org/gnome/system/location&lt;/code&gt; to enabled. After that, the Night light settings will work as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also change the setting in the terminal without installing anything by executing &lt;code&gt;gsettings set org.gnome.system.location enabled true&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please execute &lt;code&gt;sudo apt-get install dconf-editor&lt;/code&gt; in the terminal to install &lt;em&gt;dconf-editor&lt;/em&gt;. You can also find it in the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="17845" LastEditorUserId="17845" LastEditDate="2019-04-11T09:52:32.180" LastActivityDate="2019-04-11T09:52:32.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18672" PostTypeId="2" ParentId="11246" CreationDate="2019-04-11T16:04:54.083" Score="1" Body="&lt;p&gt;That is because of cached metadata. Executing the following command on terminal will delete your cached metadata and re-download them,&lt;br&gt;&#xA;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&lt;/code&gt; &lt;code&gt;sudo apt-get update&lt;/code&gt; &lt;code&gt;sudo apt-get clean&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I suggested &lt;code&gt;sudo apt-get install --fix-missing&lt;/code&gt; on comment as a bonus to install / fix any broken package, but this was not necessary for your problem I think.   &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-11T16:04:54.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18675" PostTypeId="2" ParentId="7724" CreationDate="2019-04-11T17:26:13.500" Score="1" Body="&lt;p&gt;At this point if you don't have really done any kind of customization, you might just reinstall the OS without the encryption.&lt;/p&gt;&#xA;" OwnerUserId="13916" LastActivityDate="2019-04-11T17:26:13.500" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18676" PostTypeId="1" CreationDate="2019-04-11T18:05:58.263" Score="0" ViewCount="821" Body="&lt;p&gt;I do have AMD redeon 530 graphics card in my laptop. Is there a way i can make PC to use it.MY steam doesnt detect my AMD redeon 530 graphics.&lt;/p&gt;&#xA;" OwnerUserId="17855" LastActivityDate="2024-01-11T22:08:15.997" Title="how to make AMD switchable graphics work in linux?" Tags="|release-juno|graphic-drivers|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18678" PostTypeId="1" CreationDate="2019-04-12T00:27:06.183" Score="0" ViewCount="1390" Body="&lt;pre&gt;&lt;code&gt;This may have been caused by external, manually added software repositories or a corrupted sources file.&#xA;&#xA;W: GPG error: http://i-hate-farms.github.io/spores trusty InRelease: The following signatures were invalid: 2F3C3D45B6C9A4E9E22A1AE1F7F707E5B5329C31&#xA;E: The repository 'http://i-hate-farms.github.io/spores trusty InRelease' is not signed.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: http://i-hate-farms.github.io/spores trusty InRelease is not (yet) available (The following signatures were invalid: 2F3C3D45B6C9A4E9E22A1AE1F7F707E5B5329C31)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17853" LastEditorUserId="16827" LastEditDate="2019-04-12T10:00:06.637" LastActivityDate="2019-04-12T10:00:06.637" Title="Failed to fetch updates" Tags="|updates|release-juno|" AnswerCount="1" CommentCount="1" ClosedDate="2019-05-05T11:28:05.767" ContentLicense="CC BY-SA 4.0" />
  <row Id="18679" PostTypeId="2" ParentId="18678" CreationDate="2019-04-12T00:39:07.287" Score="1" Body="&lt;p&gt;You can just install &quot;Software &amp;amp; Updates&quot; from the app center &amp;amp; uncheck the appropriate repository. In this case, i-hate-farms.github&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/7684/17853&quot;&gt;https://elementaryos.stackexchange.com/a/7684/17853&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17853" LastActivityDate="2019-04-12T00:39:07.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18680" PostTypeId="2" ParentId="7655" CreationDate="2019-04-12T02:10:08.453" Score="1" Body="&lt;p&gt;There was a known issue in elementary OS Loki where context menus were not displayed for non-native or &quot;client-side decorated&quot; apps, like Firefox or Electron apps. However, this has been fixed in elementary OS Juno.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-04-12T02:10:08.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18681" PostTypeId="2" ParentId="18588" CreationDate="2019-04-12T08:01:36.300" Score="-1" Body="&lt;p&gt;Please try to do the following commands (in a terminal window)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ LANG=en_US&#xA;$ sudo ./StartGUI.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;good luck!&lt;/p&gt;&#xA;" OwnerUserId="17863" LastEditorUserId="578" LastEditDate="2019-04-12T22:03:30.863" LastActivityDate="2019-04-12T22:03:30.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18682" PostTypeId="1" AcceptedAnswerId="18685" CreationDate="2019-04-12T09:44:06.267" Score="1" ViewCount="328" Body="&lt;p&gt;I installed a few days ago(monday I think) elementary OS 5.0 Juno. Everything went really good, I'ma pretty experienced Linux user, I've been using ubuntu,elementary os and linux in general for quite a lot. However, today when I ran &lt;code&gt;apt update&lt;/code&gt; this happend: &lt;a href=&quot;https://pastebin.com/3Peg9c9M&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/3Peg9c9M&lt;/a&gt;. Any ideas on how to fix this? Thanks in advance :) &lt;/p&gt;&#xA;" OwnerUserId="14201" LastEditorUserId="16827" LastEditDate="2019-04-12T15:29:30.450" LastActivityDate="2019-04-13T11:37:20.017" Title="Update error - signatures couldn't be verified because the public key is not available" Tags="|release-juno|updates|system|apt|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="18683" PostTypeId="2" ParentId="18656" CreationDate="2019-04-12T10:16:46.113" Score="2" Body="&lt;p&gt;Not sure what you mean &lt;em&gt;exactly&lt;/em&gt; by factory reset (see SilverWolf's comment), but there is a button in Settings &gt; About system, that is called &quot;Reset to factory settings&quot; (or similar, I use Czech locale).&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2019-04-12T10:16:46.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18685" PostTypeId="2" ParentId="18682" CreationDate="2019-04-12T15:25:34.480" Score="0" Body="&lt;p&gt;Please execute &lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys &amp;lt;yout_key_string&amp;gt;&lt;/code&gt;&lt;br&gt;&#xA;For example, &lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32&lt;/code&gt;. And run &lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work or end up with error, please try to download and install keys manually from &lt;a href=&quot;https://keyserver.ubuntu.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;keyserver.ubuntu.com&lt;/a&gt;. Search your key string like this,  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MX3iF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MX3iF.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and copy every thing from the BEGIN PGP PUBLIC KEY line to END PGP PUBLIC KEY line. Save the text in a text file. Then please execute &lt;code&gt;sudo apt-key add &amp;lt;file_name.txt&amp;gt;&lt;/code&gt;. For example if save the key contents in a text file name key, then &lt;code&gt;sudo apt-key add key.txt&lt;/code&gt;. Now run &lt;code&gt;sudo apt update&lt;/code&gt; from the terminal or go to &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt; and check for updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this also didn't worked, please execute &lt;code&gt;cp /etc/apt/trusted.gpg{~,}&lt;/code&gt; to  restore trusted.gpg from APT automatic backup. And then run &lt;code&gt;sudo apt update&lt;/code&gt; to check if the issue still persists. If yes, please  execute &lt;code&gt;sudo rm /etc/apt/trusted.gpg &amp;amp;&amp;amp; apt-key update&lt;/code&gt; to delete and re-create it with the keys for the Ubuntu archive. Run update now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you face problem with &lt;a href=&quot;/questions/tagged/appcenter&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;appcenter&amp;#39;&quot; rel=&quot;tag&quot;&gt;appcenter&lt;/a&gt;, maybe there's no &lt;a href=&quot;https://appcenter.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;curated apps&lt;/a&gt; there, then please verify if your source list has elementary OS ppas. If your sources list don't have these,  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[patches.list] ppa:elementary-os/os-patches&#xA;[elementary.list] ppa:elementary-os/stable&#xA;[appcenter.list] deb http://packages.elementary.io/appcenter bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please add them, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo add-apt-repository ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And add &lt;code&gt;http://packages.elementary.io/appcenter bionic main&lt;/code&gt; at the end of the source.list file.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please execute &lt;code&gt;sudo nano /etc/apt/sources.list&lt;/code&gt; to open sources.list.&lt;br&gt;&#xA;Hopefully this will fix your problem.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-13T11:37:20.017" LastActivityDate="2019-04-13T11:37:20.017" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18686" PostTypeId="6" CreationDate="2019-04-12T19:17:51.913" Score="0" Body="&lt;p&gt;I just presented my candidature so that Hasan doesn't feel alone moderating..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also it's always good to have more than one moderator to avoid concentrations of power and to have plurality of opinions to better guide a community.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2019-04-12T19:17:51.913" LastActivityDate="2019-04-12T19:17:51.913" CommentCount="0" CommunityOwnedDate="2019-04-12T19:17:51.913" ContentLicense="CC BY-SA 4.0" />
  <row Id="18687" PostTypeId="1" CreationDate="2019-04-12T19:29:59.413" Score="1" ViewCount="208" Body="&lt;p&gt;I believe the Pantheon file manager found in elementary OS is simply called &lt;a href=&quot;https://github.com/elementary/files&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pantheon Files&lt;/a&gt;, right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I'm curious, is this file manager based on another file manager? Based on the GNOME file manager, for example.&lt;/p&gt;&#xA;" OwnerUserId="17868" LastEditorUserId="16827" LastEditDate="2019-04-13T13:50:01.553" LastActivityDate="2019-04-13T13:50:01.553" Title="Pantheon File Manager Fork?" Tags="|pantheon-files|files|folder|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18688" PostTypeId="2" ParentId="18687" CreationDate="2019-04-12T21:53:42.787" Score="2" Body="&lt;p&gt;Pantheon (Files) is (was) a fork of Marlin. However I think nowadays it is almost entirely rewritten&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/pantheon-files&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/pantheon-files&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/marlin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/marlin&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="578" LastActivityDate="2019-04-12T21:53:42.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18689" PostTypeId="1" CreationDate="2019-04-13T02:11:42.567" Score="0" ViewCount="22" Body="&lt;p&gt;I’m troubled. I messed something up, and don’t know how to fix it.&lt;br&gt;&#xA;I was changing some X stuff (and some video driver stuff) and everything seemed to be working fine. Then, I rebooted, and I couldn’t login because my keyboard wasn’t typing, and my mouse wasn’t moving. Please note that when I typed, it made the cursor flash, like it would if you typed an invalid character. I can log in via single user, so I can enter commands via the console, and I ran &lt;code&gt;init 3&lt;/code&gt; to get permissions.&lt;br&gt;&#xA;I am stuck. I’ve been trying everything I could think of to fix it, to no avail, for about 5 hours. I really want my stuff back, without reinstalling. Could I please have some suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;info follows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /etc/X11/Xsession.options returns (excluding commented lines)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;allow-failsafe&#xA;allow-user-resources&#xA;allow-user-xsession &#xA;use-ssh-agent &#xA;use-session-dbus &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cat /etc/X11/default-display-manager returns&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/sbin/lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tell me if you need other files.&lt;/p&gt;&#xA;" OwnerUserId="17870" LastEditorUserId="16827" LastEditDate="2019-04-14T05:24:25.560" LastActivityDate="2019-04-14T05:24:25.560" Title="Possible bug (probably with X or video drivers) that doesn’t allow keyboard / mouse access at greeter" Tags="|release-juno|xorg|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18690" PostTypeId="1" CreationDate="2019-04-13T13:34:24.327" Score="1" ViewCount="65" Body="&lt;p&gt;In some applications e.g (Boinc or PlayOnLinux) I have the following bug:&lt;a href=&quot;https://i.stack.imgur.com/KFPW7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KFPW7.png&quot; alt=&quot;bug&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any clue about this? I already searched for it but I did not found anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can drag both windows to resize them. The inner or outer does not matter which one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For anyone else having this issue please go here:&#xA;&lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/244&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The user Sticcia has a good workaround:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Start an application with the issue like this:&#xA;&lt;code&gt;env Exec=env GTK_CSD=0 X&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where &lt;code&gt;X&lt;/code&gt; would be the application e.g. &lt;code&gt;playonlinux&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17846" LastEditorUserId="17846" LastEditDate="2019-04-21T11:07:09.837" LastActivityDate="2019-04-21T11:07:09.837" Title="Duplicate Window Bug" Tags="|window-management|window-manager|" AnswerCount="0" CommentCount="0" ClosedDate="2019-04-17T18:18:25.277" ContentLicense="CC BY-SA 4.0" />
  <row Id="18692" PostTypeId="1" CreationDate="2019-04-13T14:58:10.630" Score="1" ViewCount="2592" Body="&lt;p&gt;I've installed elementary OS 5.0 to a /dev/sda3 partition alongside two NTFS /dev/sda1 and /dev/sda2 partitions, whose mount point is set before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I'd want to delete the first two NTFS partitions and extend the elementary OS partition to the whole disk (not encrypted) through a live USB disk and GParted, and make it bootable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do that without loss of data?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="15112" LastEditorUserId="16827" LastEditDate="2019-04-13T17:11:47.203" LastActivityDate="2020-05-07T19:05:10.523" Title="Resize elementary OS partition to full disk partition" Tags="|system-installation|release-juno|disk-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18693" PostTypeId="2" ParentId="18692" CreationDate="2019-04-13T17:10:45.043" Score="1" Body="&lt;p&gt;To resize elementary OS partition please boot into a live-usb of elementary OS and select the &lt;em&gt;try&lt;/em&gt; option. Then please open GParted and resize your elementary OS partition. You can just resize it, no need to delete or remove any partition, system will automatically do what it needs to do. No loss of data.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-13T17:10:45.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18694" PostTypeId="2" ParentId="18455" CreationDate="2019-04-14T03:12:58.997" Score="0" Body="&lt;p&gt;I had installed kde-connect  easily via terminal&#xA;just add &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt install kdeconnect&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and here is the app&lt;/p&gt;&#xA;&#xA;&lt;p&gt;KDE Connect on Google Play: &lt;a href=&quot;https://play.google.com/store/apps/details?id=org.kde.kdeconnect_tp&amp;amp;hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=NPl6JBAxQo4&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17742" LastActivityDate="2019-04-14T03:12:58.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18695" PostTypeId="1" CreationDate="2019-04-14T12:40:46.433" Score="1" ViewCount="33" Body="&lt;p&gt;I'm desperate to get a resolution to this problem, the thing is a managed to get the drivers working on and r9 390, went to launch and when I go back the pc was shut off, I start it off and I got a black screen then I forced a shutdown and when I got it running the drivers stopped working for some reason, man I was so happy to get them working and now they stopped working, need to point I blacklisted radeon and im using amdgpu with &lt;code&gt;radeon.si_support=0&lt;/code&gt; and &lt;code&gt;amgpu.si_suppport=1&lt;/code&gt; also need to mention that &lt;code&gt;lspci -v&lt;/code&gt; returns this in VGA part.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290/390] (rev 80) (prog-if 00 [VGA controller])&#xA;Subsystem: ASUSTeK Computer Inc. Hawaii PRO [Radeon R9 290/390]&#xA;Flags: fast devsel, IRQ 16&#xA;Memory at d0000000 (64-bit, prefetchable) [size=256M]&#xA;Memory at e0000000 (64-bit, prefetchable) [size=8M]&#xA;I/O ports at e000 &#xA;Memory at efe00000 (32-bit, non-prefetchable) [size=256K]&#xA;Expansion ROM at 000c0000 [disabled] [size=128K]&#xA;Capabilities: &amp;lt;access denied&amp;gt;&#xA;Kernel modules: radeon, amdgpu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;None of them works for some reason, I also blacklisted radeon.&lt;/p&gt;&#xA;" OwnerUserId="17873" LastEditorUserId="578" LastEditDate="2019-04-14T15:35:03.950" LastActivityDate="2019-04-14T15:35:03.950" Title="For some reason amdgpu stopped working" Tags="|system|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18696" PostTypeId="1" CreationDate="2019-04-14T15:00:38.853" Score="0" ViewCount="41" Body="&lt;p&gt;For some reason my lockscreen/sign in screen has changed the clock/calendar format to French and I am unable to find any settings for it. The desktop is in English and the clock and calendar are in the formats I set them at. It wasn't until after a recent update (after sunday) that this happened. Has anyone else experienced this problem.&lt;/p&gt;&#xA;" OwnerUserId="17772" LastActivityDate="2019-04-15T11:11:43.823" Title="Why is my lockscreen in French?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18697" PostTypeId="1" CreationDate="2019-04-14T16:23:18.593" Score="0" ViewCount="131" Body="&lt;p&gt;I'm looking for a way to group several icons into one folder. For example: DisplayCAL is a set of six utilities I'd like very much to group instead of having them spread in alphabetical order.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;eOs Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="16832" LastActivityDate="2019-10-06T13:01:00.853" Title="Grouping icons into folders" Tags="|slingshot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18700" PostTypeId="1" CreationDate="2019-04-14T17:50:55.923" Score="0" ViewCount="8388" Body="&lt;p&gt;This isn't a question but instead a tutorial to install the SSH feature on elementary os. When I looked at forms it told me just to do &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install openssh-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but then I got an error: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; openssh-server : Depends: libssl1.0.0 (&amp;gt;= 1.0.2) but it is not going to be installed&#xA;                  Recommends: ssh-import-id but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so what you actually have to do is enter these 2 commands in order &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ssh-import-id&#xA;sudo apt-get install openssh-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then restart your machine&lt;/p&gt;&#xA;" OwnerUserId="17877" LastEditorUserId="578" LastEditDate="2019-04-14T20:35:36.253" LastActivityDate="2024-03-25T08:05:15.743" Title="How to enable SSH on elementary os" Tags="|ssh|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18701" PostTypeId="1" CreationDate="2019-04-14T18:55:51.180" Score="0" ViewCount="387" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/z6rDD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/z6rDD.png&quot; alt=&quot;Broken application search button&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/r2MSu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r2MSu.png&quot; alt=&quot;Broken Back anad next button in file-manager&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actually, don't have any idea how these icons were broken. Just after restarting my pc I found all these broken icons. Anyone know how to solve this issue [not a critical problem I must say, just bugging me] and thanks in advance.  &lt;/p&gt;&#xA;" OwnerUserId="17875" LastEditorUserId="16827" LastEditDate="2019-04-15T07:39:24.037" LastActivityDate="2024-01-21T02:06:45.787" Title="How to fix broken icons in elementary os?" Tags="|release-juno|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18702" PostTypeId="2" ParentId="18653" CreationDate="2019-04-14T23:28:12.053" Score="1" Body="&lt;p&gt;If you wish to delete everything you can achieve this by an eOS USB flash drive. Just boot your computer from the usb flash drive, choose 'Try elementary OS without installing' and use GParted application to format the drive you want to clear. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-04-14T23:28:12.053" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18703" PostTypeId="2" ParentId="18609" CreationDate="2019-04-14T23:47:27.713" Score="1" Body="&lt;p&gt;You can achieve this if you toggle fullscreen mode of the application you are using. You can set a keyboard shortcut for this in System Settings &gt; Keyboard &gt; Shortcuts &gt; Window &gt; Toggle Fullscreen and it works for all applications not only for the web browsers. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-04-14T23:47:27.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18704" PostTypeId="2" ParentId="18513" CreationDate="2019-04-15T00:36:31.500" Score="1" Body="&lt;p&gt;I can recommend you to try Boot Repair application installed after you boot from the live USB/CD. Boot your computer from the live USB, choose &quot;Try elementary OS without installing it&quot;. Once you are there, open terminal and update it using &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you achieve that, install the software-properties-common in order to add repositories. You can achieve this by &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you have to add the following repo and install the boot repair application:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair &amp;amp;&amp;amp; sudo apt update&#xA;sudo apt install -y boot-repair &amp;amp;&amp;amp; boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can find more information about this app if you follow this link - &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Boot-Repair&lt;/a&gt; It saved me a lot of times with one small issue - it will add a lot of useless entries in the bootloader, but you can remove them if you edit &lt;strong&gt;/etc/grub.d/40_custom&lt;/strong&gt; file. Do not forget to backup it before you delete the (menuentries) there. Good luck! &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-04-15T00:36:31.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18705" PostTypeId="1" CreationDate="2019-04-15T04:04:43.713" Score="1" ViewCount="56" Body="&lt;p&gt;I don't want to have to embed the album artwork into all of my music files. Oftentimes music players will look for the single file called Folder.jpg or Cover.jpg included in the folder with the music files. Does the music app support this, or does it plan to eventually?&lt;/p&gt;&#xA;" OwnerUserId="17879" LastActivityDate="2019-04-15T04:04:43.713" Title="Is it possible to use Folder.jpg album artwork scheme?" Tags="|music|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18707" PostTypeId="1" CreationDate="2019-04-15T08:41:27.920" Score="0" ViewCount="33" Body="&lt;p&gt;I want to install elementary OS and try it out but it never reaches the GUI the background appears for a fraction of a second and it then goes into an endless loop mouse cursor bottom right and back to a blank screen. It just keeps doing that forever. I had the same issue with Ubuntu 18.04 and it never was resolved, 18.10 is fine on the latest download. The graphics card is an ATI / AMD RS740 [Radeon 2100] built into the PC a Packard Bell UTOW-BEN. Can anyone help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Colin&lt;/p&gt;&#xA;" OwnerUserId="16995" LastEditorUserId="16827" LastEditDate="2019-04-15T13:24:19.737" LastActivityDate="2019-04-15T13:24:19.737" Title="Boot endless loop" Tags="|system-installation|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18708" PostTypeId="2" ParentId="18696" CreationDate="2019-04-15T11:11:43.823" Score="1" Body="&lt;p&gt;You can go to &lt;strong&gt;Settings&lt;/strong&gt; -&gt; &lt;strong&gt;Language and Region&lt;/strong&gt;&#xA;Now you should see a window with the actual settings of language.&#xA;On the &lt;strong&gt;right top corner&lt;/strong&gt; there is an &lt;strong&gt;unlock button&lt;/strong&gt;. Press it and enter your password.&#xA;After this it should be possible to set the correct Language and Region.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then restart the system.&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-04-15T11:11:43.823" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18709" PostTypeId="2" ParentId="18701" CreationDate="2019-04-15T13:39:49.227" Score="0" Body="&lt;p&gt;It looks like a broken icon set. This could be caused by a wrong translation / language pack and / or changed theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to set the Language and Region back to default (English) or try to reinstall the desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately I do not have a elementary OS running right now, but I think it can be done with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-04-15T13:39:49.227" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18710" PostTypeId="2" ParentId="16019" CreationDate="2019-04-15T19:36:57.963" Score="0" Body="&lt;p&gt;I am not familiar why but some people say that there is some sensor which do that. I manage to fix it using this line in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /lib/systemd/system/iio-sensor-proxy.service /lib/systemd/system/iio-sensor-proxy.service_disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-04-15T19:36:57.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18711" PostTypeId="1" CreationDate="2019-04-15T19:57:18.777" Score="1" ViewCount="149" Body="&lt;p&gt;On Juno is there a way to change the Pantheon-greeter font? I tried various things in /etc/lightdm/* and /usr/share/lightdm/* but nothing seemed to affect the font. gsettings didn't find anything relevant either. Hard coded?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Raleway is a great font; just want to mix it up a bit for some of the lab systems so I know what is what at a glance regardless of what the KVM is set to.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, how would I go about completely removing the session chooser from the greeter screen? I don't want these boxes ever going into anything other than Pantheon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suppose I could add a custom lightdm theme but want to avoid that if I can.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2019-04-15T19:57:18.777" Title="Greeter Font and Session Chooser" Tags="|release-juno|settings|display|greeter|themes|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18712" PostTypeId="1" CreationDate="2019-04-15T21:21:27.837" Score="0" ViewCount="43" Body="&lt;p&gt;Is anyone using Plexamp with Juno?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are you able to access its App Menu? Under Unity the app makes an icon in the notification area and you can right click to get a menu for switching libraries and such.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a bunch of threads out there for other distros that talk about setting XDG_CURRENT_DESKTOP=Unity and such. I tried a bunch of permutations of that without success. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the app is not using the right hooks for Pantheon/Wingpanel. I'd think this would be better in Plank from a UI perspective... Not sure why they chose notifications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas for a work around? Helper app?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2019-04-15T21:21:27.837" Title="PlexAmp, Notifications, wingpanel" Tags="|release-juno|wingpanel|pantheon|notifications|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-18T14:48:57.633" ContentLicense="CC BY-SA 4.0" />
  <row Id="18713" PostTypeId="5" CreationDate="2019-04-15T23:21:00.093" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Secure Shell (SSH) is a cryptographic network protocol for operating&#xA;  network services securely over an unsecured network. Typical&#xA;  applications include remote command-line login and remote command&#xA;  execution, but any network service can be secured with SSH.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:18:15.103" LastActivityDate="2019-04-30T14:18:15.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18714" PostTypeId="4" CreationDate="2019-04-15T23:21:00.093" Score="0" Body="For SSH related issues in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-15T23:21:00.093" LastActivityDate="2019-04-15T23:21:00.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18716" PostTypeId="5" CreationDate="2019-04-16T04:24:55.467" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;USB is an industry standard that establishes specifications for&#xA;  cables, connectors and protocols for connection, communication and&#xA;  power supply between personal computers and their peripheral devices.&#xA;  Released in 1996, the USB standard is currently maintained by the USB&#xA;  Implementers Forum.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:16:55.750" LastActivityDate="2019-04-30T14:16:55.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18717" PostTypeId="4" CreationDate="2019-04-16T04:24:55.467" Score="0" Body="For questions related to USB issues in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T04:24:55.467" LastActivityDate="2019-04-16T04:24:55.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18718" PostTypeId="5" CreationDate="2019-04-16T05:19:32.510" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The user interface, in the industrial design field of human–computer&#xA;  interaction, is the space where interactions between humans and&#xA;  machines occur.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:16:32.127" LastActivityDate="2019-04-30T14:16:32.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18719" PostTypeId="4" CreationDate="2019-04-16T05:19:32.510" Score="0" Body="For questions related to user interface in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T05:19:32.510" LastActivityDate="2019-04-16T05:19:32.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18720" PostTypeId="5" CreationDate="2019-04-16T05:24:08.900" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Ethernet is a family of computer networking technologies commonly used&#xA;  in local area networks, metropolitan area networks and wide area&#xA;  networks.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:16:03.560" LastActivityDate="2019-04-30T14:16:03.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18721" PostTypeId="4" CreationDate="2019-04-16T05:24:08.900" Score="0" Body="For questions about issues related to Ethernet in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T05:24:08.900" LastActivityDate="2019-04-16T05:24:08.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18722" PostTypeId="5" CreationDate="2019-04-16T05:30:36.667" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A virtual private network extends a private network across a public&#xA;  network, and enables users to send and receive data across shared or&#xA;  public networks as if their computing devices were directly connected&#xA;  to the private network.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:15:16.417" LastActivityDate="2019-04-30T14:15:16.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18723" PostTypeId="4" CreationDate="2019-04-16T05:30:36.667" Score="0" Body="For question about issues related to VPN in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T05:30:36.667" LastActivityDate="2019-04-16T05:30:36.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18724" PostTypeId="5" CreationDate="2019-04-16T05:32:49.170" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The Macintosh is a family of personal computers designed,&#xA;  manufactured, and sold by Apple Inc. since January 1984. The original&#xA;  Macintosh was the first mass-market personal computer that featured a&#xA;  graphical user interface, built-in screen and mouse.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:14:57.127" LastActivityDate="2019-04-30T14:14:57.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18725" PostTypeId="4" CreationDate="2019-04-16T05:32:49.170" Score="0" Body="Questions relating to macintosh and elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T05:32:49.170" LastActivityDate="2019-04-16T05:32:49.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18726" PostTypeId="5" CreationDate="2019-04-16T13:10:01.980" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Samba is a free and open-source SMB/CIFS protocol implementation for&#xA;  Unix and Linux that allows for file and print sharing between&#xA;  Unix/Linux and Windows machines in a local area network. ... It also&#xA;  allows the Samba server to be seen by other computers on the network.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:14:36.790" LastActivityDate="2019-04-30T14:14:36.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18727" PostTypeId="4" CreationDate="2019-04-16T13:10:01.980" Score="0" Body="For issues related to samba in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T13:10:01.980" LastActivityDate="2019-04-16T13:10:01.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18728" PostTypeId="5" CreationDate="2019-04-16T13:17:53.347" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The Intelligent Input Bus is an input method framework for&#xA;  multilingual input in Unix-like operating-systems. The name &quot;Bus&quot;&#xA;  comes from its bus-like architecture.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:14:15.943" LastActivityDate="2019-04-30T14:14:15.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18729" PostTypeId="4" CreationDate="2019-04-16T13:17:53.347" Score="0" Body="For questions related to ibus issues in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T13:17:53.347" LastActivityDate="2019-04-16T13:17:53.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18731" PostTypeId="5" CreationDate="2019-04-16T13:19:04.627" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The shell is the command interpreter in an operating system such as&#xA;  Unix or GNU/Linux, it is a program that executes other programs. It&#xA;  provides a computer user an interface to the Unix/GNU Linux system so&#xA;  that the user can run different commands or utilities/tools with some&#xA;  input data.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:13:53.680" LastActivityDate="2019-04-30T14:13:53.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18732" PostTypeId="4" CreationDate="2019-04-16T13:19:04.627" Score="0" Body="For questions related to shell issues in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T13:19:04.627" LastActivityDate="2019-04-16T13:19:04.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18733" PostTypeId="5" CreationDate="2019-04-16T13:31:06.337" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A hard disk drive, hard disk, hard drive, or fixed disk, is an&#xA;  electromechanical data storage device that uses magnetic storage to&#xA;  store and retrieve digital information using one or more rigid rapidly&#xA;  rotating disks coated with magnetic material.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:13:25.950" LastActivityDate="2019-04-30T14:13:25.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18734" PostTypeId="4" CreationDate="2019-04-16T13:31:06.337" Score="0" Body="For questions related to hard disk drive issues in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-16T13:31:06.337" LastActivityDate="2019-04-16T13:31:06.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18736" PostTypeId="1" CreationDate="2019-04-16T17:52:19.500" Score="0" ViewCount="70" Body="&lt;p&gt;I have installed elementary OS 5 and when i run &lt;code&gt;lscpu&lt;/code&gt; i see only 2 CPUcores working instead of 4.&lt;br&gt;&#xA;I have notebook Asus E203N. Any ideas to solve it ??&lt;/p&gt;&#xA;" OwnerUserId="17895" LastEditorUserId="16827" LastEditDate="2019-04-17T02:09:45.383" LastActivityDate="2019-04-17T02:09:45.383" Title="Only using 2 cores instead of 4" Tags="|system|cpu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18737" PostTypeId="2" ParentId="18736" CreationDate="2019-04-16T20:07:35.807" Score="1" Body="&lt;p&gt;Is &lt;a href=&quot;https://ark.intel.com/content/www/es/es/ark/products/95598/intel-celeron-processor-n3350-2m-cache-up-to-2-4-ghz.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; your CPU? If that's the case you only have 2 cores not 4.&#xA;Otherwise update your question with your CPU model.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I doubt your laptop has it, but some computers allow to unblock the CPU to have more cores or to enable hyperthreading. Check inside the bios/firmware to see if there's such option.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-04-16T20:07:35.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18738" PostTypeId="2" ParentId="16234" CreationDate="2019-04-16T20:30:49.257" Score="1" Body="&lt;p&gt;First run &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt; command on the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After this try system update again.&lt;/p&gt;&#xA;" OwnerUserId="16722" LastActivityDate="2019-04-16T20:30:49.257" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18739" PostTypeId="1" CreationDate="2019-04-16T22:05:14.687" Score="2" ViewCount="129" Body="&lt;p&gt;I've been using elementary OS on various computers for years.&#xA;I recently upgraded my travel laptop from a lower end unit (Lenovo N-22, Celeron, 4GB) to something with a bit more capability (Lenovo 11e, i3, 8GB).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, on this unit both elementary and Ubuntu treat the secondary trackpad/mousepad button the same as the primary button.  While a two-finger tap does function as the secondary button, it's not the same experience.&#xA;Oddly, the button works as expected on Zorin, Deepin and Wind*ws, so it's not a hardware issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've read that things can get dicey on trackpads where the buttons are part of the general pad surface.  I've installed &lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt; but that has not made any difference.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone has any driver or configuration suggestions then I'm all ears.&#xA;Any suggestions would be appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 1:&lt;/strong&gt;&#xA;I have just re-tried System Settings -&gt; Mouse &amp;amp; Touchpad -&gt; Touchpad -&gt; Physical clicking -&gt; Hardware default &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 2:&lt;/strong&gt;&#xA;As requested, here is the output of: &lt;code&gt;apt list --installed | grep &quot;xserver-xorg-input-libinput&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xserver-xorg-input-libinput/bionic,now 0.27.1-1 amd64 [installed]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update 3:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing &lt;code&gt;gnome-tweak-tool&lt;/code&gt; and the selecting &quot;Area under Mouse Click Emulation&quot; Mouse Click Emulation option there is no change in behavior. Clicking the lower right button area of the trackpad is still treated as if the primary button is pushed. This behavior continued following a system reboot.&lt;/p&gt;&#xA;" OwnerUserId="17894" LastEditorUserId="16827" LastEditDate="2019-04-20T04:25:01.503" LastActivityDate="2019-04-20T04:25:01.503" Title="Secondary trackpad/mousepad button not functioning as expected" Tags="|release-juno|touchpad|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="18740" PostTypeId="1" CreationDate="2019-04-16T23:12:01.847" Score="1" ViewCount="102" Body="&lt;p&gt;I installed the elementary OS Juno but at the time of starting the system it is looped in the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor Atom x5 z8350&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to fix this loop?&lt;/p&gt;&#xA;" OwnerUserId="17896" LastEditorUserId="16827" LastEditDate="2019-04-17T02:04:19.253" LastActivityDate="2020-11-01T04:48:05.300" Title="Bootloop at login screen of newly installed elementary OS" Tags="|system-installation|boot|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18741" PostTypeId="1" CreationDate="2019-04-17T04:07:47.877" Score="0" ViewCount="154" Body="&lt;p&gt;I have an HP Stream 14 with a large clickpad. Previously, when I had Windows 10, the clickpad had a right-click context menu when clicking the right side of the clickpad. I can't seem to get that working for me... any ideas?&lt;/p&gt;&#xA;" OwnerUserId="17897" LastActivityDate="2024-01-28T11:03:45.420" Title="Right-click context menu for Clickpad" Tags="|touchpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18743" PostTypeId="2" ParentId="18739" CreationDate="2019-04-17T05:51:43.720" Score="1" Body="&lt;p&gt;In System Settings -&gt; Mouse &amp;amp; Touchpad -&gt; Touchpad tab, make sure that Physical Clicking is switched on and set to Default Hardware.&lt;/p&gt;&#xA;" OwnerDisplayName="user511" LastEditorUserId="16827" LastEditDate="2019-04-17T07:13:26.293" LastActivityDate="2019-04-17T07:13:26.293" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18745" PostTypeId="1" CreationDate="2019-04-17T11:46:12.150" Score="2" ViewCount="2038" Body="&lt;p&gt;As described in the title, it occurs when scrolling up and down on a web page, it occurs when watching videos.  You can go on youtube and do the screen tearing test and it easily shows up on the test.  In general, it is bad in linux, but relatively under control on Manjaro, but it seems to be the worse on elementary OS, at least for me.  I do have an nvidia card.  I have tried the force full composite pipeline; but that still didn't fix it. &lt;/p&gt;&#xA;" OwnerUserId="17902" LastEditorUserId="16827" LastEditDate="2019-04-17T17:33:54.280" LastActivityDate="2020-04-28T13:32:14.730" Title="how to fix screen tearing with web scrolling" Tags="|display|nvidia|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18747" PostTypeId="1" CreationDate="2019-04-17T16:08:20.077" Score="0" ViewCount="39" Body="&lt;p&gt;I tried to turn off the dispaly on my laptop, because I'm  using a secondary display and I used &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16445/monitor-settings-do-not-work-cannot-disable-integrated-screen-of-the-laptop&quot;&gt;this guide&lt;/a&gt;, but it's not working. I get the error message saying &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;bash: eDP-1-1: No such file or directory&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but when i use&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xrandr | grep &quot; connected &quot; | awk '{ print$1 }'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it says that the display name is  eDP-1-1. Could someone help me?&lt;/p&gt;&#xA;" OwnerUserId="17904" LastActivityDate="2019-08-27T04:37:26.327" Title="Can't turn off the secondary display" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18748" PostTypeId="1" CreationDate="2019-04-17T16:24:32.993" Score="0" ViewCount="20" Body="&lt;p&gt;Unlike in many other Linux distros I know (Fedora, Manjaro...) AbiWord in  eOS only offers to save documents in its own native file format.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody knows of a way to make AbiWord saving documents at least in rtf?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="16832" LastActivityDate="2019-04-17T16:24:32.993" Title="AbiWord saves files in native format only" Tags="|release-juno|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18749" PostTypeId="1" CreationDate="2019-04-17T17:18:05.237" Score="1" ViewCount="116" Body="&lt;p&gt;When running with the Juno release Live CD, I can login to my icloud account (www.icloud.com) with Epiphany and bring up the various services with the hashtag reference (#mail, etc.) &lt;strong&gt;but&lt;/strong&gt; I cannot open mail messages, calendar entries, etc.  Epiphany simply does not respond and there do not appear to be any settings/preferences to help fix this problem.  Is this behavior expected?&lt;/p&gt;&#xA;" OwnerUserId="17905" LastActivityDate="2019-04-17T17:18:05.237" Title="Epiphany browser with iCloud web client" Tags="|epiphany|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18750" PostTypeId="5" CreationDate="2019-04-17T20:57:38.017" Score="0" Body="&lt;p&gt;According to Wikipedia:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;A Chromebook is a laptop or tablet running the Linux-based Chrome OS&#xA;  as its operating system. The devices are primarily used to perform a&#xA;  variety of tasks using the Google Chrome browser, with most&#xA;  applications and data residing in the cloud rather than on the machine&#xA;  itself.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-30T14:12:57.663" LastActivityDate="2019-04-30T14:12:57.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18751" PostTypeId="4" CreationDate="2019-04-17T20:57:38.017" Score="0" Body="For questions related to issues on Chromebook and elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-17T20:57:38.017" LastActivityDate="2019-04-17T20:57:38.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18752" PostTypeId="2" ParentId="17978" CreationDate="2019-04-18T15:04:21.547" Score="0" Body="&lt;p&gt;This problem got solved after some updates this week. Also, even 1080p videos play now in youtube. I still have &lt;code&gt;gstreamer1.0-plugins-bad&lt;/code&gt; installed, I don't know what got updated. So I think this issue can be closed.&lt;/p&gt;&#xA;" OwnerUserId="4168" LastActivityDate="2019-04-18T15:04:21.547" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18753" PostTypeId="1" AcceptedAnswerId="18754" CreationDate="2019-04-18T16:18:15.283" Score="-1" ViewCount="428" Body="&lt;p&gt;How do I remove the standard &quot;files&quot; application in elementary? I already set the new file manager (Polo) as the new default, via the settings. I checked if that worked via &lt;code&gt;xdg-mime query default inode/directory&lt;/code&gt; and it shows me that this worked. All that's left to do know is getting rid of the old file manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found out that I can run pantheon via this command: &lt;code&gt;io.elementary.files&lt;/code&gt; but there is no package with this name.&lt;/p&gt;&#xA;" OwnerUserId="17846" LastActivityDate="2019-04-18T16:21:33.290" Title="Remove standard file manager" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18754" PostTypeId="2" ParentId="18753" CreationDate="2019-04-18T16:21:33.290" Score="1" Body="&lt;p&gt;Ohh I found it the package name is just &lt;code&gt;pantheon-files&lt;/code&gt; :)&lt;/p&gt;&#xA;" OwnerUserId="17846" LastActivityDate="2019-04-18T16:21:33.290" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18757" PostTypeId="1" AcceptedAnswerId="18760" CreationDate="2019-04-19T06:42:28.990" Score="0" ViewCount="239" Body="&lt;p&gt;I have an US layout keyboard. I like to have the umlaut like I had them in Windows (US International Layout) where &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;P&lt;/kbd&gt; is an &amp;quot;ö&amp;quot; and so on...&lt;/p&gt;&#xA;&lt;p&gt;I figured out when I use &lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&lt;/code&gt; that I can change to US International layout but the compose key &lt;code&gt;Right Alt&lt;/code&gt; seems to be not working...&lt;/p&gt;&#xA;&lt;p&gt;I also found out that every other key I use as a compose key works. Only Right Alt does not.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="17846" LastEditorUserId="84" LastEditDate="2021-07-27T21:14:31.167" LastActivityDate="2021-07-27T21:14:31.167" Title="US Int. keyboard layout Right Alt not working as compose key" Tags="|release-juno|keyboard-layout|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18758" PostTypeId="1" AcceptedAnswerId="18759" CreationDate="2019-04-19T06:54:04.013" Score="1" ViewCount="81" Body="&lt;p&gt;After using an HDMI TV for video and audio output, I disconnected my laptop and left the house.  After that my web browser and the video player could no longer output audio over the speakers, the system prefers that disconnected output device for audio.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Rebooting did not help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What should I to do?&lt;/p&gt;&#xA;" OwnerUserId="17847" LastEditorUserId="16827" LastEditDate="2019-04-19T18:57:37.527" LastActivityDate="2019-04-19T18:57:37.527" Title="Audio output stuck on device that is no longer connected" Tags="|release-juno|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18759" PostTypeId="2" ParentId="18758" CreationDate="2019-04-19T06:56:46.683" Score="1" Body="&lt;p&gt;I suspected the pulseaudio was stuck for specific apps on the device that was no longer there (the TV) seeing that the system settings app could still output audio fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Pulse Audio Control: &lt;code&gt;sudo apt install pavucontrol&lt;/code&gt; .  And in here I could select the output per application.  Indeed the HDMI was still selected, changing it to the built in audio output fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="17847" LastActivityDate="2019-04-19T06:56:46.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18760" PostTypeId="2" ParentId="18757" CreationDate="2019-04-19T08:34:57.307" Score="1" Body="&lt;p&gt;I found the solution (I did the wrong combination before):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;code&gt;Generic 105-key PC (intl.)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;code&gt;English (US)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;code&gt;English (US) - English (intl., with AltGr dead keys)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;code&gt;Right Alt (AltGr)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Choose &lt;code&gt;No compose key&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;And that's it :)&lt;/p&gt;&#xA;" OwnerUserId="17846" LastActivityDate="2019-04-19T08:34:57.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18762" PostTypeId="1" CreationDate="2019-04-19T11:47:24.237" Score="0" ViewCount="8633" Body="&lt;p&gt;I'm trying to install Wine stable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I used the following code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wine&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and it say:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;wine-stable : Depends: wine-stable-amd64 (= 4.0~cosmic) but it is not &#xA;going to be installed&#xA;           Depends: wine-stable-i386 (= 4.0~cosmic)&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Pls help me&lt;/p&gt;&#xA;" OwnerUserId="17918" LastEditorUserId="18048" LastEditDate="2019-05-06T16:16:28.360" LastActivityDate="2019-06-02T19:59:41.603" Title="Install Wine on elementary OS Juno" Tags="|software-installation|wine|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18763" PostTypeId="2" ParentId="18762" CreationDate="2019-04-19T17:31:36.290" Score="3" Body="&lt;p&gt;Must it necessarily be from the terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can use appcenter and install from there wine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would also recommend using playonlinux, so you can even manage the different versions of wine.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-04-19T17:31:36.290" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18764" PostTypeId="1" AcceptedAnswerId="18765" CreationDate="2019-04-19T18:10:08.020" Score="0" ViewCount="385" Body="&lt;p&gt;Given how immediately familiar Files felt when coming from Finder, I was surprised to see a drag-drop of a folder to the sidebar not resulting in the creation of a bookmark.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did I miss something obvious here or are bookmarks simply not supported?&lt;/p&gt;&#xA;" OwnerUserId="17920" LastEditorUserId="17907" LastEditDate="2019-04-21T10:42:14.723" LastActivityDate="2019-04-21T10:42:14.723" Title="Problem with adding bookmark in Files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18765" PostTypeId="2" ParentId="18764" CreationDate="2019-04-19T18:55:52.693" Score="1" Body="&lt;p&gt;Press right button on any folder you want to bookmark and click on &lt;em&gt;Bookmark&lt;/em&gt;, you will see your desired folder in the sidebar in &lt;a href=&quot;/questions/tagged/files&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;files&amp;#39;&quot; rel=&quot;tag&quot;&gt;files&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And as Hasan suggested,  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Please go to the folder you want to bookmark and press&#xA;  &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;D&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;this should work too.&lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-19T18:55:52.693" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18766" PostTypeId="1" CreationDate="2019-04-19T20:17:07.820" Score="0" ViewCount="232" Body="&lt;p&gt;I have a Macbook pro that no longer runs OS X, I have Zorin 12 on it. I am trying to figure out how to install elementary on my Macbook. From elementary's website, I have 3 options to choose from my current operating system: Windows (download Rufus and make a Install Drive on a USB) Mac OS, and Ubuntu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since my Zorin OS is meant for Windows I tried to go the Rufus option, downloading its newest version 3.5. When I opened it (after downloading) it says &quot;Unsupported Windows version, This version of Windows is no longer supported by Rufus&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already made up the elementary OS 5.0 Juno DVD. But following the instructions on their website isn't getting me anywhere because I do NOT have a Bootable USB drive. I have also tried other options to Rufus- like Pendrivelinux, but thats only seeming to frustrate me, too because I am not very tech saavy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know what to do or send me a link for a from anyone who has changed from Zorin OS to elementary OS -- and preferably with a Macbook?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks  &lt;/p&gt;&#xA;" OwnerUserId="17922" LastEditorUserId="18048" LastEditDate="2019-05-06T16:39:17.383" LastActivityDate="2019-05-06T16:39:17.383" Title="moving from Zorin 12 to elementary OS juno" Tags="|system-installation|release-juno|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="18768" PostTypeId="1" AcceptedAnswerId="18769" CreationDate="2019-04-19T23:07:32.273" Score="0" ViewCount="85" Body="&lt;p&gt;Have installed Elementary OS per the official instructions, and it never shows GRUB but rather boots straight into Windows. Here's a non-exhaustive list of what I've tried so far:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Turn off quick boot &amp;amp; disable safe boot&lt;/li&gt;&#xA;&lt;li&gt;Run boot-repair (log here: &lt;a href=&quot;http://paste.ubuntu.com/p/GtrJw76R2q&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/p/GtrJw76R2q&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Mess with boot order&lt;/li&gt;&#xA;&lt;li&gt;Reinstall Elementary&lt;/li&gt;&#xA;&lt;li&gt;Boot in Legacy mode (shows black screen with blinking cursor forever)&lt;/li&gt;&#xA;&lt;li&gt;Use BCD edit (Elementary doesn't show up, and it gives me a warning that since my computer is booting in EFI, its functionality is limited&lt;/li&gt;&#xA;&lt;li&gt;Use command line to bypass this (bcdedit /set ...)&lt;/li&gt;&#xA;&lt;li&gt;Mounting/chrooting stuff to be able to run update-grub&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Needless to say, I'm pretty frustrated at this point...&#xA;I've taken a look at a bunch of the answers on here but none that I've found have worked. Help would be greatly appreciated! I'm thinking this is a more complex issue, so hopefully the boot-repair log will provide any relevant details.&lt;/p&gt;&#xA;" OwnerUserId="17923" LastActivityDate="2019-04-20T04:07:30.020" Title="Issues dual-booting Elementary Freya and Windows 10" Tags="|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18769" PostTypeId="2" ParentId="18768" CreationDate="2019-04-20T04:07:30.020" Score="0" Body="&lt;p&gt;Please &lt;strong&gt;follow the instruction even if you tried them before and I know how frustrating this can be&lt;/strong&gt;. But please do follow the instruction once again. It should fix your issue.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot int Windows &gt; Search for &lt;em&gt;Command Prompt&lt;/em&gt; &gt; right click on it and click &lt;em&gt;run it as administrator&lt;/em&gt; &gt; Then please execute this command &lt;code&gt;bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi&lt;/code&gt; &gt; Restart your computer. &lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-20T04:07:30.020" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18771" PostTypeId="1" CreationDate="2019-04-20T08:22:44.653" Score="0" ViewCount="88" Body="&lt;p&gt;I installed elementaryOS 2 days ago and everything works fine. &#xA;The only issue I was not able to resolve:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The time displayed on the login screen is cut off and the items seem to be misplaced alltogether (see picture).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using elementary on my desktop PC with a screen resolution of 1920x1080.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to readjust this?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q&#xA;&#xA;Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 16384 x 16384&#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;DVI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm&#xA;   1920x1080     60.00*+&#xA;   1600x1200     60.00  &#xA;   1680x1050     59.88  &#xA;   1280x1024     75.02    60.02  &#xA;   1440x900      59.90  &#xA;   1280x960      60.00  &#xA;   1152x864      75.00  &#xA;   1024x768      75.03    70.07    60.00  &#xA;   832x624       74.55  &#xA;   800x600       72.19    75.00    60.32    56.25  &#xA;   640x480       75.00    72.81    66.67    59.94  &#xA;   720x400       70.08  &#xA;VGA-0 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/c1UUa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c1UUa.jpg&quot; alt=&quot;elements are off center&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17925" LastEditorUserId="17925" LastEditDate="2019-04-20T22:02:15.643" LastActivityDate="2024-03-03T01:04:55.623" Title="Login screen items misplaced" Tags="|greeter|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18772" PostTypeId="2" ParentId="18771" CreationDate="2019-04-20T09:07:26.247" Score="0" Body="&lt;p&gt;Please go to &lt;strong&gt;Settings&lt;/strong&gt; &gt; &lt;strong&gt;Display&lt;/strong&gt; &gt; Set scaling factor to &lt;strong&gt;Automatic&lt;/strong&gt; and click on the gear icon upper left corner from the blue area and select screen solution to &lt;strong&gt;1366 * 768&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to vote down this answer if it doesn't help. Pleas read &lt;a href=&quot;https://elementaryos.meta.stackexchange.com/questions/109/vote-the-site-needs-it&quot;&gt;VOTE - The site needs it&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-20T09:07:26.247" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18773" PostTypeId="2" ParentId="13887" CreationDate="2019-04-20T09:49:38.577" Score="0" Body="&lt;p&gt;There seems to be a new project to make launching AppImages easier. It can also, when you consent, integrate the app in your system automatically. &#xA;&lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/TheAssassin/AppImageLauncher&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2019-04-20T09:49:38.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18775" PostTypeId="1" CreationDate="2019-04-20T14:30:30.557" Score="2" ViewCount="254" Body="&lt;p&gt;I have partitioned and prepared an &lt;code&gt;ext4&lt;/code&gt; file system with additional needed parameters. I need to install elementary OS 5 JUNO on this formatted partition. But the elementary OS installer won't let me choose this partition for install. elementary OS Automated install tool is too stupid for this - can't mount root on prepared before ext4. Can you help me with installing it?&lt;/p&gt;&#xA;&lt;p&gt;Ext4 filesystem parameters:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mkfs.ext4 -O ^has_journal -E stride=1,stripe-width=512 -b 4096 -L Linux  /dev/sdb1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;EDIT: There are special parameters I don't want to change but This installer wants to change them when I choose partition for installing. It has to be &lt;code&gt;ext4&lt;/code&gt; without journaling and a special sride and strap. But there's only an arbitrary option for ext4 with journaling and some not disclosed stride and strap parameters.&lt;/p&gt;&#xA;" OwnerUserId="17926" LastEditorUserId="11882" LastEditDate="2021-06-07T03:47:41.500" LastActivityDate="2024-02-22T12:02:55.347" Title="How to install elementary OS 5 on prepared before ext4 filesystem with additional parameters?" Tags="|system-installation|release-juno|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18776" PostTypeId="2" ParentId="18775" CreationDate="2019-04-20T15:05:04.717" Score="0" Body="&lt;p&gt;Please chose &lt;strong&gt;Something else&lt;/strong&gt; in the installation process when it asks you where to install the OS. The options are like,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Erase the disk and install&lt;/li&gt;&#xA;  &lt;li&gt;Remove your current OS and install elementary OS&lt;/li&gt;&#xA;  &lt;li&gt;Something else&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After choosing &lt;strong&gt;something else&lt;/strong&gt;, you will be able to select the partition you want to install. &lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-20T15:05:04.717" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18777" PostTypeId="2" ParentId="18766" CreationDate="2019-04-20T16:40:36.043" Score="1" Body="&lt;p&gt;I think you basically want to install elementary OS replacing Zorin OS. Please follow the instructions bellow,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;At first please download elementary OS from the official website. If you have downloaded already please go to next step.&lt;/li&gt;&#xA;&lt;li&gt;After that please open the Zorin Menu and go to &quot;Utilities&quot; &gt; &quot;Terminal&quot; and change directory to where you download files is by &lt;code&gt;cd &amp;lt;path to your dir&amp;gt;&lt;/code&gt;. For example if you have that file in &quot;Downloads&quot; folder than you should execute &lt;code&gt;cd Downloads&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Now please execute the command &lt;code&gt;sha256sum elementaryos-5.0-stable.20181016.iso&lt;/code&gt; to verify the download. You will have exact output as shown in the elementary OS website which is, &lt;code&gt;a8c7b8c54aeb0889bb3245356ffcd95b77e9835ffb5ac56376a3b627c3e1950f&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;After that you need to install UNetbootin. To install execute these commands in the terminal one after one, you can also follow other instructions provided &lt;a href=&quot;https://unetbootin.github.io/linux_download.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;in this page&lt;/a&gt;. If you have installed already you can skip this step.&lt;br&gt;&#xA;  &lt;code&gt;sudo add-apt-repository ppa:gezakovacs/ppa&lt;/code&gt;&lt;br&gt;&#xA;  &lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;br&gt;&#xA;  &lt;code&gt;sudo apt-get install unetbootin&lt;/code&gt;  &lt;/li&gt;&#xA;&lt;li&gt;At this point please follow steps of using UNetbootbin from &lt;a href=&quot;https://elementary.io/id/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io website&lt;/a&gt;. Which goes as follows,&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Open UNetbootin from the Dash. It will open a window like the one below:&lt;/li&gt;&#xA;  &lt;li&gt;&lt;strong&gt;Select &quot;Diskimage&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;strong&gt;Click &quot;…&quot; to select the ISO that you downloaded previously.&lt;/strong&gt;&lt;/li&gt;&#xA;  &lt;li&gt;Unplug all USB memory devices apart from the one you want to use.&lt;/li&gt;&#xA;  &lt;li&gt;Click &quot;OK&quot; and wait for the process to finish.&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;  &#xA;  &lt;p&gt;&lt;strong&gt;Booting from the Install Drive&lt;/strong&gt;   In order to start the installation process, you must boot your computer from the install&#xA;  drive.  &lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Assuming that your computer is still on, start by inserting your install drive and restarting your computer.&lt;/li&gt;&#xA;  &lt;li&gt;Most computers will briefly allow you to change the boot order for this boot only by pressing a special key — usually &lt;kbd&gt;F12&lt;/kbd&gt;, but&#xA;  sometimes  &lt;kbd&gt;ESC&lt;/kbd&gt; or another function key. Refer to the screen&#xA;  or your computer's documentation to be sure.  &lt;/li&gt;&#xA;  &lt;li&gt;Press &lt;kbd&gt;F12&lt;/kbd&gt; (or the appropriate key) and select the install drive—usually &quot;USB-HDD&quot; or something containing the word&#xA;  &quot;USB&quot;, but the wording may vary. If you choose the incorrect drive,&#xA;  your computer will likely continue to boot as normal. Just restart&#xA;  your computer and pick a different drive in that menu.  &lt;/li&gt;&#xA;  &lt;li&gt;Shortly after selecting the appropriate boot drive, you should be presented with the elementary OS splash screen. You may now follow the&#xA;  on-screen instructions which will guide you through the rest of the&#xA;  process.&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="17907" LastEditorUserId="17907" LastEditDate="2019-04-21T12:44:43.103" LastActivityDate="2019-04-21T12:44:43.103" CommentCount="12" ContentLicense="CC BY-SA 4.0" />
  <row Id="18778" PostTypeId="2" ParentId="18653" CreationDate="2019-04-20T16:50:21.837" Score="0" Body="&lt;p&gt;The problem can be solved in this way:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a new user with admin permissions and log in.&lt;/li&gt;&#xA;&lt;li&gt;Remove your user in settings.&lt;/li&gt;&#xA;&lt;li&gt;Remove your user directory from &lt;code&gt;home&lt;/code&gt; directory.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12150" LastActivityDate="2019-04-20T16:50:21.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18779" PostTypeId="1" CreationDate="2019-04-20T18:29:09.163" Score="1" ViewCount="54" Body="&lt;p&gt;On elementary OS juno. When i open my laptop or start the laptop up Bluetooth is on by default, is there a way i can disable it from being enabled on startup until i want to use it?&lt;/p&gt;&#xA;" OwnerUserId="17930" LastActivityDate="2019-04-20T18:29:09.163" Title="How to keep bluetooth off by default?" Tags="|release-juno|bluetooth|" AnswerCount="0" CommentCount="0" ClosedDate="2019-04-29T19:58:49.467" ContentLicense="CC BY-SA 4.0" />
  <row Id="18781" PostTypeId="1" CreationDate="2019-04-21T04:42:46.173" Score="0" ViewCount="143" Body="&lt;p&gt;So I made the acquisition of a Seagate Backup Plus Slim to use as an external hard-drive for a laptop that years later now refuses to acknowledge either the internal HDD or SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm having issues during installation&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The partition /dev/sda1 assigned to / starts at an offset of 3584&#xA;  bytes from the minimum alignment for this disk, which may lead to very&#xA;  poor performance.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Since you are formatting this partition, you should correct this&#xA;  problem now by realigning the partition, as it will be difficult to&#xA;  change later. To do this, go back to the main partitioning menu,&#xA;  delete the partition, and recreate it in the same position with the&#xA;  same settings. This will cause the partition to start at a point best&#xA;  suited for this disk.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I attempted to follow the instructions and after hours of attempting to solve this issue I've gotten nowhere. I'm frustrated and just want this to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: while i'd much prefer using ext4 since most distros i've used default to that, using a different file system seems to work. Xfs was specified from what I found and that worked. If you're having the same problem this is the closest to a fix I've been able to find.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR if you get this error use xfs instead it seems to work just fine.&lt;/p&gt;&#xA;" OwnerUserId="17936" LastEditorUserId="17907" LastEditDate="2019-05-29T21:53:19.953" LastActivityDate="2019-05-29T21:53:19.953" Title="How to fix 3584 alignment offset issue during installation" Tags="|system-installation|hdd|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18782" PostTypeId="1" AcceptedAnswerId="18802" CreationDate="2019-04-21T05:41:12.157" Score="0" ViewCount="1251" Body="&lt;p&gt;Is there a way to upgrade from the current Juno to a more advanced release of Ubuntu such as 19.04 or 19.10? Also, what is the reason to necessarily base on LTS releases and, as a consequence, will there be a new Elementary OS release based on 20.04LTS in first quarter 2020?&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2019-04-23T11:04:54.633" Title="Will there be a version of Juno based on Ubuntu 19.04 or 19.10 before 20.04 LTS?" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18783" PostTypeId="1" AcceptedAnswerId="18784" CreationDate="2019-04-21T12:04:26.790" Score="1" ViewCount="6075" Body="&lt;p&gt;Installed Elementary OS on Lenovo R61 laptop. Takes over 5 minutes to start. Black screen filled with flip_done timed out error messages before splash screen displayed. Once started it takes exactly one minute from the time the password is entered until the desktop is displayed.&lt;/p&gt;&#xA;" OwnerUserId="17938" LastActivityDate="2022-10-22T15:11:40.413" Title="How to overcome &quot;flip_done&quot; timed out errors" Tags="|system|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18784" PostTypeId="2" ParentId="18783" CreationDate="2019-04-21T12:55:07.357" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;This is a bug. To avoid delay you can use workaround. From terminal&#xA;  run:&lt;/p&gt;&#xA;  &#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;&lt;code&gt;sudo nano /etc/default/grub&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;  &#xA;  &lt;p&gt;Then add the kernel boot parameter: &lt;code&gt;video=SVIDEO-1:d&lt;/code&gt;, so it will&#xA;  look like this: &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&#xA;  video=SVIDEO-1:d&quot;&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;ol start=&quot;2&quot;&gt;&#xA;  &lt;li&gt;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;li&gt;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Above answer grabbed from &lt;a href=&quot;https://askubuntu.com/a/916112/907048&quot;&gt;https://askubuntu.com/a/916112/907048&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-21T12:55:07.357" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18785" PostTypeId="1" CreationDate="2019-04-21T13:25:33.200" Score="0" ViewCount="18" Body="&lt;p&gt;Trying to install Linux last night, but cannot boot with UEFI. Please add support for UEFi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created bootable using unetbootin, pendrivelinux UEFI, but not working. &lt;/p&gt;&#xA;" OwnerUserId="17939" LastEditorUserId="3018" LastEditDate="2019-04-21T14:12:30.943" LastActivityDate="2019-04-21T14:12:30.943" Title="Add support for UEFI" Tags="|system-installation|release-juno|" AnswerCount="0" CommentCount="2" ClosedDate="2019-04-21T14:05:17.800" ContentLicense="CC BY-SA 4.0" />
  <row Id="18786" PostTypeId="1" CreationDate="2019-04-21T20:13:49.547" Score="1" ViewCount="712" Body="&lt;p&gt;I am trying to get emoji to work in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I installed a couple of weeks ago, it has not worked for me. &lt;a href=&quot;https://i.stack.imgur.com/OaZkQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;I see only an empty emoji picker&lt;/a&gt;. I have tried to use Ideogram from the AppCentre, but it also displays no emoji, just empty categories like the system one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/bed333/how_can_i_get_emoji_working/&quot; rel=&quot;nofollow noreferrer&quot;&gt;I also asked on Reddit about this&lt;/a&gt;. I followed the instructions provided to me there, but they have not been successful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anybody else had an issue with emoji? Is there a way to &quot;reset&quot; back to a working configuration? I was under the impression that in Juno it should be working out of the box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards.&lt;/p&gt;&#xA;" OwnerUserId="17856" LastEditorUserId="18048" LastEditDate="2019-05-06T16:38:58.823" LastActivityDate="2024-02-21T09:08:15.990" Title="How to get emoji working in elementary OS Juno" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18787" PostTypeId="1" CreationDate="2019-04-21T23:37:44.477" Score="0" ViewCount="69" Body="&lt;p&gt;I was wondering what should I do to enable this when I rotate the screen (I do this often with keyboard shortcuts for &lt;em&gt;xrandr -o normal&lt;/em&gt; and &lt;em&gt;xrandr -o left&lt;/em&gt;). The feature works &lt;a href=&quot;https://cdn-images-1.medium.com/max/1600/1*vinLDLc_TjAKz_ooxXRErg.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;only on Landscape mode&lt;/a&gt;, but not on portrait (similar to what you can do on &lt;a href=&quot;https://youtu.be/oahar1FinP8?t=73&quot; rel=&quot;nofollow noreferrer&quot;&gt;latest Android versions&lt;/a&gt;). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In other words: I want that when I rotate my screen, to be able to maximize windows and that they stick on an upper and lower half, and that to be able to adjust the split size just like in landscape mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And I'm using latest Juno eOS release. Any clue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AAyyS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AAyyS.jpg&quot; alt=&quot;window tiling where?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6275" LastActivityDate="2019-04-21T23:37:44.477" Title="How to enable adjustable tiling on Portrait mode?" Tags="|window-management|window-decoration|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18788" PostTypeId="2" ParentId="18786" CreationDate="2019-04-22T00:01:51.833" Score="0" Body="&lt;p&gt;It should be working right after installation of the app. Have you tried uninstalling and reinstalling Ideogram? Perhaps the font pack didn’t get installed correctly. &lt;/p&gt;&#xA;" OwnerUserId="10264" LastActivityDate="2019-04-22T00:01:51.833" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18790" PostTypeId="1" AcceptedAnswerId="18808" CreationDate="2019-04-22T14:09:56.150" Score="0" ViewCount="576" Body="&lt;p&gt;Where on the web is Loki's install manifest file? I want to compare it with the current build to see what I have installed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or is there another way?&lt;/p&gt;&#xA;" OwnerUserId="17945" LastEditorUserId="16827" LastEditDate="2019-04-28T14:20:06.547" LastActivityDate="2019-04-28T14:20:06.547" Title="How to know which packages I have installed manually?" Tags="|release-loki|system|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18791" PostTypeId="1" CreationDate="2019-04-22T16:36:39.830" Score="0" ViewCount="143" Body="&lt;p&gt;&lt;code&gt;Reposting here from reddit&lt;/code&gt;&#xA;Hi everyone, Noobity McNooberson here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, next semester I'm supposed to start a programming class and I'm very excited for it, so I thought I would install a linux based os on my ASUS N550JV (came with W8, updated to W10) in dual boot (still need W10 for adobe), just to get the hang of it (I was told from another student that the teacher would require us to have some sort of linux os for class purposes and that linux-based os do not make your pc sound like an airplane taking off, bc they're lighter)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I took the distro picker test and eOS Juno scored the highest for my necessities (also is sooo cute)... But I'm such a noob, that I can't even get it to work! :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've spent the last two days trying to work around it, and this is what keeps on happening:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I make a USB bootable with Rufus&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I go in UEFI mode: in Security, I disabled the Secure Boot Control, in Boot I enabled both Launch CSM and Launch PXE OpRom, then Save&amp;amp;Exit&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;During the reboot, I remove the live USB, no error (I assume I did it correctly)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After the reboot, the installation goes fine&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboots again and it goes straight to W10 (often altering the hour, showing 2 hours less i.e. if it's 10:30, it'll show 08:30 after reboot)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I go once again in UEFI &gt; Boot, to up the partition where Elementary should be installed (it shows a new boot option called P2:something) as the first boot option and W10 as the second boot option, then Save&amp;amp;Exit&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboots and gives this error:&quot;Reboot and select proper boot device or insert boot media in selected boot device and press a key&quot;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;With a little intuition and research, I found out the error means that the selected partition doesn't have a OS in it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried installing third party grub-fix-stuff in live mode (I didn't quite understand what I was doing, just tried to follow tutorials bc I'm a noob), but couldn't unlock ppa (whatever it is).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried eliminating partitions, giving the space back to the D: partition and installing again, didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried cleaning and recreating the USB bootable and going to the whole process again, didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Could you please help me understand what's going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: again, I'm very noob so pls don't hate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pps: also, I'm european, english is not my first language so, I hope I'm not coming off as a pretentious asshole, I really don't expect assistance from anyone, I'm just trying to understand how to solve the issue and be able to run eOS Juno and I would love to hear from more experienced ppl. Also, if you think that eOS Juno isn't the best Linux OS for my purposes or have any type of advice on the matter, I will absolutely love to hear from you!&lt;/p&gt;&#xA;" OwnerDisplayName="user17946" LastActivityDate="2023-12-28T05:05:20.583" Title="Problems with installation (beware: noob level over 9000)" Tags="|system-installation|release-juno|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18792" PostTypeId="2" ParentId="18791" CreationDate="2019-04-22T19:16:36.467" Score="0" Body="&lt;p&gt;After reading &lt;a href=&quot;https://neosmart.net/wiki/reboot-and-select-proper-boot-device/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; I think the issue is that one of the two OS isn't installed in UEFI mode or you have some incorrect setting in the bios. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try disabling &lt;code&gt;Launch CSM and Launch PXE&lt;/code&gt; since you've already installed elementary you shouldn't need those enabled I think.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can boot into Windows and check the boot mode pressing Win+R then typing &lt;code&gt;msinfo32&lt;/code&gt; and looking for the words &lt;code&gt;BIOS Mode&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.rodsbooks.com/refind/bootmode.html#windows&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-04-22T19:16:36.467" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18793" PostTypeId="2" ParentId="9820" CreationDate="2019-04-22T19:30:57.623" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;I restored a kodi - xbmc - xmlbackup from another computer. Then, I used fusion installer to then install/run config wizard. &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Why don't you start from a clean installation of the apps you restored and see if that fixes it? Backups cause problems when switching to other distros because they can use different versions of many packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, according to &lt;a href=&quot;https://www.notebookcheck.org/AMD-A-Series-A4-5000-Notebook-Processor.95284.0.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; your processor is a bit old and the integrated GPU is slow so you need to be patient when it hangs. It's just that it can't go faster!&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-04-22T19:30:57.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18795" PostTypeId="1" CreationDate="2019-04-23T00:57:37.407" Score="0" ViewCount="85" Body="&lt;p&gt;I am new in the Linux world. I want to let elementary OS automatically login to my NAS after each reboot. Now I have to login manually after each reboot which is getting pretty annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I connect through SMB (Windows share). How can I accomplish this?&lt;/p&gt;&#xA;" OwnerUserId="17892" LastActivityDate="2019-04-23T00:57:37.407" Title="System will not login automatically to SMB server after login" Tags="|release-juno|settings|system|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="18796" PostTypeId="2" ParentId="18090" CreationDate="2019-04-23T10:10:42.157" Score="0" Body="&lt;p&gt;These symptoms sound like an issue that has been reported and now fixed related to certain plugins crashing Code: &lt;a href=&quot;https://github.com/elementary/code/issues/619&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/issues/619&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A new version incorporating the fix was released in early March 2019.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For future reference, it is possible to reset all of Code's preferences to default with the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dconf reset -f /io/elementary/code/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This often resolves issues with code relating to plugins or documents its trying to re-open that are causing issues.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:10:42.157" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18797" PostTypeId="2" ParentId="18216" CreationDate="2019-04-23T10:22:06.637" Score="1" Body="&lt;p&gt;A lot of the elementary developers (myself included) use the tools included in the OS (the terminal and the editor called Code). While this isn't a fully fledged IDE with a debugger like you mention, it does have some basic features to help with development, for example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Full syntax highlighting for many programming languages (including Vala which is used to write all apps included in elementary)&lt;/li&gt;&#xA;&lt;li&gt;Basic git integration, showing changed files and allowing branch switching&lt;/li&gt;&#xA;&lt;li&gt;Bracket completion, whitespace stripping and automatic indentation&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Meson and ninja are part of the build system and are very intuitive once you get used to them. The benefit of using such a system is that it is the same config files that are used to generate installable packages from the source, giving a level of reproducibility.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my build/run/debug cycle looks a bit like the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make changes in Code editor&lt;/li&gt;&#xA;&lt;li&gt;Use terminal to run relevant meson/ninja commands (usually just &lt;code&gt;ninja&lt;/code&gt; once you've configured it once)&lt;/li&gt;&#xA;&lt;li&gt;Run/test app from build folder using terminal&lt;/li&gt;&#xA;&lt;li&gt;Debugging usually consists of print statements within the code for simple debugging or &lt;code&gt;gdb&lt;/code&gt;/&lt;code&gt;valgrind&lt;/code&gt; on the command line for anything more complex&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I appreciate that this seems fairly rudimental compared to what you'll be used to but it's become quite an efficient workflow for me. Although I can appreciate the steep learning curve.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other hand, I've been hearing really good things about GNOME Builder recently which will be closer to the fully fledged IDE you'll be used to. Although if you want to give that a try, I'd probably suggest installing a later version than what's available in the repositories (possibly from flathub using flatpak).&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:22:06.637" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18798" PostTypeId="2" ParentId="17817" CreationDate="2019-04-23T10:36:49.440" Score="1" Body="&lt;p&gt;After making changes to desktop files manually, you often have to run:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo update-desktop-database&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This can also be pointed at your local user's desktop database like so:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;update-desktop-database ~/.local/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And changes to mime types often need the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo update-mime-database /usr/share/mime&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although the &lt;code&gt;update-mime-database&lt;/code&gt; command is not likely necessary in this case, as that's usually needed when new mime types are registered rather than adding new applications to existing mimes.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:36:49.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18799" PostTypeId="2" ParentId="17693" CreationDate="2019-04-23T10:41:26.830" Score="1" Body="&lt;p&gt;Your best option is to visit the Github page for each of the apps in question (&lt;a href=&quot;https://github.com/kmal-kenneth/monilet&quot; rel=&quot;nofollow noreferrer&quot;&gt;Monilet&lt;/a&gt; for example) and follow the &lt;a href=&quot;https://github.com/kmal-kenneth/monilet#building-and-installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;build instructions&lt;/a&gt; on the page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may not work for all apps as Juno has a lot of newer packages that may produce incompatibilities, but it will often work, especially for simpler apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you try this and experience any issues, feel free to comment on my answer and I'll try and help if possible.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:41:26.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18800" PostTypeId="2" ParentId="13058" CreationDate="2019-04-23T10:46:25.673" Score="2" Body="&lt;p&gt;No, this is not possible as the applications menu is a component that is built to work with wingpanel (the top bar with the clock and the other indicators on the right side) and this is not fundamentally compatible with GNOME menus or components.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are however some hidden settings (acessible via dconf or elementary tweaks) that allow you to reduce the number of rows and columns of icons shown in the menu by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/p3SQI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/p3SQI.png&quot; alt=&quot;applications-menu settings in dconf editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:46:25.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18801" PostTypeId="2" ParentId="16684" CreationDate="2019-04-23T10:52:23.350" Score="1" Body="&lt;p&gt;Looking at your screenshot, your installation is using neither the elementary GTK theme or the elementary icon theme which is the cause of the visual oddities you are experiencing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is a clean installation of elementary, I suspect you have mounted an existing home partition which contained configuration that is intefering with elementary's defaults.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds as though you have elementary tweaks installed, so you could remedy this particular issue by using that to set the GTK theme and icon theme to &lt;code&gt;elementary&lt;/code&gt; in both cases.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if the configuration you have has managed to break this, there are likely other things broken too, so I would suggest a clean install without any existing configuration or files where possible.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T10:52:23.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18802" PostTypeId="2" ParentId="18782" CreationDate="2019-04-23T11:04:54.633" Score="2" Body="&lt;p&gt;elementary only bases itself off the LTS versions of Ubuntu to reduce the development workload in continually revalidating against newer library and base package versions. So yes, the next major elementary version will be based off the next LTS release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be possible to attempt upgrades yourself, just in the same way as it may be possible to run the pantheon desktop environment on newer versions of Ubuntu or other distributions. But you'd be doing so with no expectation of support from the elementary developers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, there are often minor releases that come with updated kernels and drivers (based off the Ubuntu HWE stack) to keep up with newer hardware. For example, Loki had a 0.4.1 release that included this and Juno is expected to have a 5.1 release with the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, with Flatpak support coming in AppCenter, it ought to be possible to keep user facing applications more up to date easily. So an older base OS will matter less.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-23T11:04:54.633" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18804" PostTypeId="1" CreationDate="2019-04-23T14:02:41.530" Score="0" ViewCount="43" Body="&lt;p&gt;This is a fresh install of juno, and since day one i am unable to use the appcenter or update via apt&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is the error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:3 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata                                                                                                                                                     &#xA;  La suma hash difiere&#xA;  Hashes of expected file:&#xA;   - Filesize:158488 [weak]&#xA;   - SHA256:c14dc09acc3a9b1614b13ed15231c02372112d4cac9e1b9f6c583621e76bd104&#xA;   - SHA1:0a16db9283e0c7bf9f082a1c74cdde454dde0eae [weak]&#xA;   - MD5Sum:17a945b577cf02845d9306269767dbe8 [weak]&#xA;  Hashes of received file:&#xA;   - SHA256:40d03f1e2a9d5dd112a6f1242858d7d45c4a9de249b228477a436d8c78309ff1&#xA;   - SHA1:c08b5f6cba992cb34e09c0faba9b21fe39036fce [weak]&#xA;   - MD5Sum:4b8cadc3c304e9fee6c02ebffc792e40 [weak]&#xA;   - Filesize:158488 [weak]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The problem persist since yesterday.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far i have tried:&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15227/problems-fetching-os-updates-app-center-seemingly-not-working-the-right-way&quot;&gt;Problems fetching OS updates (App center seemingly not working the right way...)&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16913/repository-problems-on-a-new-installed-juno&quot;&gt;Repository problems, on a new installed Juno&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16535/unable-to-update-the-system-using-apt&quot;&gt;Unable to update the system using apt&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15133" LastEditorUserId="16827" LastEditDate="2019-04-23T16:33:20.753" LastActivityDate="2019-04-24T13:22:54.507" Title="Unable to use appcenter repository (hash-mismatch)" Tags="|release-juno|appcenter|repositories|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-23T16:36:02.740" ContentLicense="CC BY-SA 4.0" />
  <row Id="18805" PostTypeId="2" ParentId="18697" CreationDate="2019-04-23T15:14:59.790" Score="0" Body="&lt;p&gt;I don't think there's a way to create a folder of icons in the application menu upto now. There's a piece of software called &lt;code&gt;gnome-appfolders-manager&lt;/code&gt; which is not maintained any more so, I suggest not to use that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, In the Application menu there is a option to view them by category. But this doesn't allow you to create your own category or group of apps.&lt;/p&gt;&#xA;" OwnerUserId="17907" LastActivityDate="2019-04-23T15:14:59.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18806" PostTypeId="1" CreationDate="2019-04-23T18:55:13.357" Score="0" ViewCount="802" Body="&lt;p&gt;I've installed elementary OS 5 on Parallels Virtual Machine on a Mac and it starts up but has a black screen with the shutdown and network button wording displayed at top right. I've reset and restarted the virtual machine but same results. It did start up originally but was erratic with this problem which has now become a permanent feature.&lt;br&gt;&#xA;Windows 10 and Ubuntu Studio both run OK.&lt;br&gt;&#xA;Any suggestions would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OK, so&#xA;Dumped the file and reinstalled again. Carried out all the updates on offer from the app center and all looked good and behaved well. Installed Firefox, added it to the dock and finally shut down and restarted.&#xA;Oh dear back to the same problem of a black screen and doesn't arrive at the login screen at all! So annoying as it was performing really well and very quick!&lt;/p&gt;&#xA;" OwnerUserId="17954" LastEditorUserId="17954" LastEditDate="2019-04-28T12:23:41.003" LastActivityDate="2024-01-08T22:03:45.480" Title="elementary OS Juno starts with a black screen in virtualbox" Tags="|release-juno|virtualbox|macintosh|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18808" PostTypeId="2" ParentId="18790" CreationDate="2019-04-23T19:38:38.450" Score="1" Body="&lt;p&gt;There's another easy way to know the installed packages in your system.   &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Please open &lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt; and execute &lt;code&gt;apt list --installed&lt;/code&gt; to see what packages you have installed in your elementary OS.  &lt;/li&gt;&#xA;&lt;li&gt;Please note that executing this command will give you a long list depending on your installed packages. However, if you execute &lt;code&gt;apt list --installed | less&lt;/code&gt; it will wait for you to press &lt;kbd&gt;Enter&lt;/kbd&gt;. And after you press &lt;kbd&gt;Enter&lt;/kbd&gt;, it will be showing / loading package name one-by-one.  &lt;/li&gt;&#xA;&lt;li&gt;Let's say you want to find something from the installed packages. You can &lt;code&gt;grep &amp;lt;package_name&amp;gt;&lt;/code&gt; to achieve this. For example, &lt;code&gt;apt list --installed | grep 'language'&lt;/code&gt; will list every package installed in your system with &quot;language&quot; keyword in its name. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And to get the list of the apps/packages you manually installed please execute, &lt;code&gt;comm -23 &amp;lt;(apt-mark showmanual | sort -u) &amp;lt;(gzip -dc /var/log/installer/initial-status.gz | sed -n 's/^Package: //p' | sort -u)&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-27T15:16:09.830" LastActivityDate="2019-04-27T15:16:09.830" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18810" PostTypeId="1" CreationDate="2019-04-24T10:21:17.503" Score="3" ViewCount="129" Body="&lt;p&gt;I'd love to easily use screenkey on elementary OS to include key presses on screenrecordings but there seem to be input method issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing screenkey (0.9-2) by using &lt;code&gt;sudo apt install screenkey&lt;/code&gt; and then starting it from the command line I'm seeing this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exception in thread Thread-1:&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/python2.7/threading.py&quot;, line 801, in __bootstrap_inner&#xA;    self.run()&#xA;  File &quot;/usr/lib/python2.7/dist-packages/Screenkey/keylistener.py&quot;, line 245, in run&#xA;    raise Exception(&quot;Cannot initialize input method&quot;)&#xA;Exception: Cannot initialize input method&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I try the same with a cloned version of the latest version from &lt;a href=&quot;https://gitlab.com/wavexx/screenkey&quot; rel=&quot;nofollow noreferrer&quot;&gt;gitlab.com/wavexx/screenkey&lt;/a&gt; I get a helpfull popup pointing to a troubleshoot page:&lt;br&gt;&#xA;&lt;a href=&quot;https://www.thregr.org/~wavexx/software/screenkey/#troubleshooting&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.thregr.org/~wavexx/software/screenkey/#troubleshooting&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This asked me to check the following environment variables, which should be consistent:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XMODIFIERS=@im=ibus&#xA;GTK_IM_MODULE=&#xA;QT_IM_MODULE=ibus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So it's not, and apparently  I'm not running ibus:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ pgrep -ax ibus-daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Finally following their advice and resetting all these environment variables before running it does work. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;unset XMODIFIERS&#xA;unset GTK_IM_MODULES&#xA;unset QT_IM_MODULES&#xA;screenkey&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there something wrong with the default elementary OS configuration?&lt;br&gt;&#xA;Could I have done anything wrong? I find that these environment variables are the same on a fresh image started in a vm. &#xA;I didn't find changes to these variables in &lt;code&gt;~/.profile&lt;/code&gt;, &lt;code&gt;~/.bash_profile&lt;/code&gt; or &lt;code&gt;~/.pam_environment&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've opened an old issue of mine that I forgot about: &lt;a href=&quot;https://github.com/elementary/gala/issues/27&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/27&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-04-25T23:25:22.297" LastActivityDate="2019-04-25T23:25:22.297" Title="Running Screenkey on elementary OS" Tags="|release-juno|input|ibus|" AnswerCount="0" CommentCount="3" ClosedDate="2019-04-26T17:05:48.150" ContentLicense="CC BY-SA 4.0" />
  <row Id="18812" PostTypeId="2" ParentId="10346" CreationDate="2019-04-24T13:54:52.990" Score="1" Body="&lt;p&gt;For my headless elementary machines, I tend to set up the VNC server via LightDM. It requires the &lt;code&gt;tigervnc&lt;/code&gt; server to be installed. You can configure it as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a &lt;code&gt;vncpasswd&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vncpasswd /etc/vncpasswd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Configure &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt; with the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[VNCServer]&#xA;enabled=true&#xA;command=Xvnc -rfbauth /etc/vncpasswd&#xA;port=5900&#xA;listen-address=localhost&#xA;width=1024&#xA;height=768&#xA;depth=24&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart the machine or restart lightdm, which will kill your session. VNC should then be listening on the port specified in the config file and you will be presented with the elementary greeter when you connect. Logging into the machine locally will log you out of your VNC session and vice versa.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-24T13:54:52.990" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18813" PostTypeId="2" ParentId="11410" CreationDate="2019-04-24T13:56:20.650" Score="1" Body="&lt;p&gt;For my headless elementary machines, I tend to set up the VNC server via LightDM. It requires the &lt;code&gt;tigervnc&lt;/code&gt; server to be installed. You can configure it as follows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a &lt;code&gt;vncpasswd&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vncpasswd /etc/vncpasswd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Configure &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt; with the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[VNCServer]&#xA;enabled=true&#xA;command=Xvnc -rfbauth /etc/vncpasswd&#xA;port=5900&#xA;listen-address=localhost&#xA;width=1024&#xA;height=768&#xA;depth=24&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then restart the machine or restart lightdm, which will kill your session. VNC should then be listening on the port specified in the config file and you will be presented with the elementary greeter when you connect. Logging into the machine locally will log you out of your VNC session and vice versa.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-24T13:56:20.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18815" PostTypeId="1" CreationDate="2019-04-25T00:50:40.577" Score="0" ViewCount="154" Body="&lt;p&gt;So a little issue here. Whenever I unlock the system after it locks (either manual or automatic lock), the system does not seem to fully unlock. As in, I have to authenticate every single system action. Mounting drives, updating repositories in appcenter, etc, all need another entry of my password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone know what is going on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About my system: ASRock B450M PRO4; Quad-Core AMD Ryzen 5 2400G with Radeon Vega Graphics; elementary OS 5.0 Juno&lt;/p&gt;&#xA;" OwnerUserId="11779" LastEditorUserId="16827" LastEditDate="2019-04-26T14:53:08.767" LastActivityDate="2023-12-31T23:05:25.617" Title="Authentication Error After Lock" Tags="|release-juno|security|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18816" PostTypeId="2" ParentId="18766" CreationDate="2019-04-25T10:32:15.783" Score="1" Body="&lt;p&gt;this worked for me and many outer users.&#xA;Please follow the instructions.&#xA;&lt;a href=&quot;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.macworld.co.uk/how-to/mac/how-install-linux-on-mac-3637265/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-04-25T10:32:15.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18818" PostTypeId="1" CreationDate="2019-04-25T14:31:43.043" Score="1" ViewCount="96" Body="&lt;p&gt;I recently faced the famous login loop in ubuntu 18 and I tried everything to fix it yet I was not able to do so, since i was just getting started with ubuntu and i had nothing on it I decided to completely uninstall it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yesterday tho, I installed ubuntu 18.04 again but with a twist, I installed the elementary OS which seemed easier, and more stable (and for me, it is!!), but now I'm thinking, hey, what if i run into the same problem again!, i really tried everything to fix it and i have no idea what did i do to run into the problem in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question is, Is there any tips or advises to avoid the login loop?.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD: some of my PC specifications (its a &quot;gaming laptop&quot;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Geforce GTX 1050 (Nvidia)&#xA;intel i5 CPU&#xA;8GB RAM &#xA;1TB space on hard disk (i have assigned 150GB for ubuntu (elementary OS))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;PD2: yes, i have installed all of the drivers that nvidia needs&lt;/p&gt;&#xA;" OwnerUserId="17965" LastEditorUserId="16827" LastEditDate="2019-04-29T17:29:21.320" LastActivityDate="2024-03-11T17:03:30.430" Title="Prevent login loop" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18819" PostTypeId="2" ParentId="13791" CreationDate="2019-04-25T15:21:27.560" Score="0" Body="&lt;p&gt;Here's what worked for me (elementary OS 5.0 - Juno):&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/share/sounds/freedesktop/stereo/audio-volume-change.oga&#xA;sudo rm /usr/share/sounds/elementary/stereo/audio-volume-change.wav&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I rebooted my computer but restarting only the desktop manager should do it too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/9qibas/disable_volume_sound/eh0n9hn/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/9qibas/disable_volume_sound/eh0n9hn/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17798" LastEditorUserId="16827" LastEditDate="2019-04-28T13:26:33.057" LastActivityDate="2019-04-28T13:26:33.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18820" PostTypeId="1" CreationDate="2019-04-25T15:29:18.787" Score="0" ViewCount="47" Body="&lt;p&gt;I am looking for where to find my specific computer hardware spec's, including my battery. I have a 2009-10 macbook pro and its needing a new battery. So, I need to find the battery size and make sure I get the right one. Using E OS, Juno 5.0, is there a page I can bring up, like a Spec Page? I know OS X has it.&lt;/p&gt;&#xA;" OwnerUserId="17922" LastActivityDate="2019-04-26T10:41:48.337" Title="macbook hardware specs INCLUDING battery" Tags="|hardware|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18821" PostTypeId="1" AcceptedAnswerId="18829" CreationDate="2019-04-25T16:45:38.257" Score="0" ViewCount="387" Body="&lt;p&gt;I compiled the app in the github..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/PlugaruT/wingpanel-caffeine&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/PlugaruT/wingpanel-caffeine&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It does not seem to work.. or at least the icon does not change.. and is a generic icon for eos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope I did not compile and install a virus because it was called ninja.&#xA;Does anyone know about this.  How to remove it too.?&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2019-04-26T10:30:00.080" Title="caffeine wingpanel on github" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18823" PostTypeId="1" AcceptedAnswerId="18825" CreationDate="2019-04-25T19:38:20.300" Score="1" ViewCount="1111" Body="&lt;p&gt;Sometimes after I login to my system the media keys are dead. If I logout and back in, they usually work again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way fix this permanently, or at least without having to do a relog?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running 5.0 Juno.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As pointed out by CameronNemo, the gnome-settings-daemon handles media key presses.&#xA;After running &lt;code&gt;exec /usr/lib/gnome-settings-daemon/gsd-media-keys&lt;/code&gt; my media keys started working again.&lt;/p&gt;&#xA;" OwnerUserId="17854" LastEditorUserId="16827" LastEditDate="2019-04-26T13:41:24.860" LastActivityDate="2019-04-26T13:41:24.860" Title="How to fix keyboard's media keys?" Tags="|release-juno|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18824" PostTypeId="2" ParentId="18579" CreationDate="2019-04-25T21:27:08.147" Score="0" Body="&lt;p&gt;It is challenging to give you a definitive answer, because ideas of what an SDK should include differ. Some components that come to mind:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;development library headers -- these are available in the elementary PPAs or you can find them in some other distribution repositories&lt;/li&gt;&#xA;&lt;li&gt;an integrated development environment -- elementary code comes to mind, but Glade or GNOME Builder could be useful as well&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;TL;DR &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/getting-started&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="40" LastEditorUserId="40" LastEditDate="2019-05-05T21:23:47.513" LastActivityDate="2019-05-05T21:23:47.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18825" PostTypeId="2" ParentId="18823" CreationDate="2019-04-25T21:28:21.647" Score="2" Body="&lt;p&gt;gnome-settings-daemon handles media key presses. Perhaps it is either being started too early or too late. Your best bet is to try and isolate the problem to this service by stopping and starting it again (without logging out and in).&lt;/p&gt;&#xA;" OwnerUserId="40" LastActivityDate="2019-04-25T21:28:21.647" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18826" PostTypeId="2" ParentId="15892" CreationDate="2019-04-25T21:30:11.430" Score="0" Body="&lt;p&gt;As the other person mentioned, you would need to adapt the entire application away from Qt to use GTK. Vala is not strictly necessary, although it is commonly used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Perhaps you could use Transmission as a base, or contribute further to Torrential?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for naming the application Deluge -- I do not think this is appropriate, but you should credit the main developers anyway.&lt;/p&gt;&#xA;" OwnerUserId="40" LastActivityDate="2019-04-25T21:30:11.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18828" PostTypeId="1" CreationDate="2019-04-26T08:30:15.600" Score="1" ViewCount="115" Body="&lt;p&gt;I use external sound card, and can hear all system sounds, but when I play any song from player (&quot;melody&quot;, &quot;music&quot; or &quot;Spotifi&quot;), I can't hear anithing.&#xA;When I use headphones without external sound card - all works correctly.&#xA;I tried to use mixers, &lt;code&gt;alsa force-reload&lt;/code&gt; and other. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use Elementary Os Juno&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt list --installed | grep &quot;audio&quot;&#xA;&#xA;WARNING: apt does not have a stable CLI interface. Use with caution in scripts.&#xA;&#xA;gstreamer1.0-pulseaudio/bionic-updates,now 1.14.1-1ubuntu1~ubuntu18.04.1 amd64 [installed,automatic]&#xA;libaudio2/bionic,now 1.9.4-6 amd64 [installed,automatic]&#xA;libopenshot-audio6/bionic,now 0.1.5+dfsg1-1 amd64 [installed,automatic]&#xA;libpcaudio0/bionic,now 1.0-1 amd64 [installed,automatic]&#xA;libwebrtc-audio-processing1/bionic,now 0.3-1 amd64 [installed,automatic]&#xA;pulseaudio/bionic-updates,now 1:11.1-1ubuntu7.2 amd64 [installed,automatic]&#xA;pulseaudio-module-bluetooth/bionic-updates,now 1:11.1-1ubuntu7.2 amd64 [installed,automatic]&#xA;pulseaudio-utils/bionic-updates,now 1:11.1-1ubuntu7.2 amd64 [installed,automatic]&#xA;speech-dispatcher-audio-plugins/bionic,now 0.8.8-1ubuntu1 amd64 [installed,automatic]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8svW6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8svW6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6177" LastEditorUserId="6177" LastEditDate="2019-04-30T10:40:51.843" LastActivityDate="2019-08-01T17:47:11.630" Title="I can't hear music, but can hear all system sounds" Tags="|settings|music|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18829" PostTypeId="2" ParentId="18821" CreationDate="2019-04-26T10:30:00.080" Score="3" Body="&lt;p&gt;&lt;code&gt;ninja&lt;/code&gt; is not a virus, it is a build system like &lt;code&gt;make&lt;/code&gt; or &lt;code&gt;cmake&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you have built and installed an indicator that is not finished or ready for use. Github is not an application store, and you should not install things off there unless you understand what you are doing and trust the developer. In fact, you should not run any commands you find anywhere on the internet without understanding what they do first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To uninstall it, run the following from the same directory that you ran the commands to install the indicator:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ninja uninstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This instructs &lt;code&gt;ninja&lt;/code&gt;, the tool you used to install the indicator to remove any files it installed when you ran &lt;code&gt;sudo ninja install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-26T10:30:00.080" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18830" PostTypeId="2" ParentId="18820" CreationDate="2019-04-26T10:41:48.337" Score="1" Body="&lt;p&gt;You should be able to get some additional information about the battery in your system with the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;upower -i /org/freedesktop/UPower/devices/battery_BAT0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;However, you may be better using something like &lt;a href=&quot;https://www.ifixit.com/Info/ID-your-Mac&quot; rel=&quot;nofollow noreferrer&quot;&gt;iFixit's &quot;Identify my Mac&quot; page&lt;/a&gt; to get the exact model, and it's also a fairly reputable place to buy replacement batteries from.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-04-26T10:41:48.337" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18831" PostTypeId="2" ParentId="18815" CreationDate="2019-04-26T14:16:25.610" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;As in, I have to authenticate every single system action. Mounting&#xA;  drives, updating repositories in appcenter, etc, all need another&#xA;  entry of my password&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;That is normal or seems to me. Let's say you want to update the repositories, you opened up Terminal(&lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt;) then executed &lt;code&gt;sudo apt update&lt;/code&gt; and its for your password! Why? Because you used &lt;code&gt;sudo&lt;/code&gt; which is gives you super user privilege(root). And if you perform another &lt;code&gt;sudo&lt;/code&gt; task right after it usually won't ask for password. The whole 'security' in Linux distributions have been taken seriously so, this is okay and this is how it's good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to login as root and do stuff, execute &lt;code&gt;sudo su&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-26T14:16:25.610" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18833" PostTypeId="1" CreationDate="2019-04-26T21:17:06.637" Score="0" ViewCount="954" Body="&lt;p&gt;Having issues with getting the Calendar app to read my CalDav from a nextcloud instance, after adding and typing password, it just does not appear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked through the net and tried all the options I could find regarding this issue and change the CalDav site to million different options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas what could be an issue or how the url should be formatted?&lt;/p&gt;&#xA;" OwnerUserId="17978" LastActivityDate="2020-12-30T11:55:36.347" Title="Calendar, caldav and nextcloud not working" Tags="|calendar|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18834" PostTypeId="1" CreationDate="2019-04-27T03:10:34.530" Score="2" ViewCount="450" Body="&lt;p&gt;Whenever my computer sleeps or hibernates, I am unable to fully wake it up. Sure, the system seems to be running and all, but the display never returns. Just stuck with a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, I am working around the issue by disabling suspend via &quot;systemctl mask&quot; and masked all forms of hiberate and sleep. So now the system will never sleep and display remains active. Setting hibernate time to 'never' in system settings does nothing, hence the 'mask' workaround.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know a solution to this, so I can hibernate and resume properly?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;About my system: ASRock B450M PRO4; Quad-Core AMD Ryzen 5 2400G with Radeon Vega Graphics; elementary OS 5.0 Juno&lt;/p&gt;&#xA;" OwnerUserId="11779" LastActivityDate="2019-06-05T09:52:11.167" Title="Waking from Suspend Issue" Tags="|display|suspend|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="18840" PostTypeId="1" AcceptedAnswerId="18841" CreationDate="2019-04-28T16:12:32.583" Score="1" ViewCount="876" Body="&lt;p&gt;When I mouse scroll wheel up / down it seems like I only &quot;down arrow&quot; 3 or 4 times. How do I double the amount of lines my mouse scroll wheel covers? It seems to be an elementary OS issue, and not a specific browser thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I desire to cover more distance with a vertical scroll wheel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All Settings &gt; Mouse &amp;amp; Touchpad &gt; Mouse &gt; ??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://freewindowsvistatutorials.com/changeNumberOfLinesMouseWheelScrollsUpDownInWindows7.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;This is how you would change vertical scrolling # of lines&lt;/a&gt; in Windows, but what about EOS?&lt;/p&gt;&#xA;" OwnerUserId="17987" LastActivityDate="2020-12-01T06:45:52.403" Title="Increase vertical mouse scroll wheel lines?" Tags="|mouse|accessibility|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18841" PostTypeId="2" ParentId="18840" CreationDate="2019-04-28T16:55:12.507" Score="0" Body="&lt;p&gt;Apparently, theres no option in the settings that I know which can achieve this. You can try setting manually,  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;First check which device is the mouse:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;Now pick the ID of your mouse there, and list its current settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput list-props &amp;lt;device-id&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;then change the settings like so where &lt;code&gt;Evdev scrolling distance&#xA;  [vertical] [horizontal] [dial]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xinput set-prop &amp;lt;device-id&amp;gt; 'Evdev Scrolling Distance' 1 3 5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;where the combination of the last three numbers is mouse-dependent:&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;first number, the direction of scrolling (minus reverse)&lt;/li&gt;&#xA;  &lt;li&gt;second number, speed of scrolling somehow&lt;/li&gt;&#xA;  &lt;li&gt;third number, speed of scrolling somehow&lt;/li&gt;&#xA;  &lt;li&gt;Changing these values to bigger numbers means you scroll slower (AgentME).&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/a/709184/907048&quot;&gt;https://askubuntu.com/a/709184/907048&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-28T16:55:12.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18842" PostTypeId="1" CreationDate="2019-04-28T17:06:28.303" Score="0" ViewCount="53" Body="&lt;p&gt;Sometimes, I need to lock the elementary os and let some jobs can still work. But I found when I lock the elementary os for a while (&gt; 2h), the network will interrupt. I need the network uninterrupted when the system is locked but I don't know how to do. is there any method?&lt;/p&gt;&#xA;" OwnerUserId="17991" LastEditorUserId="16827" LastEditDate="2019-04-29T03:35:38.380" LastActivityDate="2019-04-29T18:04:44.490" Title="How to make the network uninterrupted when the system is locked on elementary os" Tags="|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18844" PostTypeId="1" CreationDate="2019-04-29T13:23:41.357" Score="1" ViewCount="650" Body="&lt;p&gt;The external display's max. resolution is 2560 x 1440, but the maximum resolution I can select on the display settings is 2048 x 1152.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to use the display in its max. resolution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System: elementary OS 0.4.1 Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Display driver: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)&lt;/p&gt;&#xA;" OwnerUserId="5938" LastEditorUserId="16827" LastEditDate="2019-04-29T17:24:36.637" LastActivityDate="2019-06-14T01:15:47.753" Title="Monitor resolution not recognized" Tags="|release-loki|display|resolution|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18845" PostTypeId="1" CreationDate="2019-04-29T14:29:49.487" Score="0" ViewCount="622" Body="&lt;p&gt;I have a Microsoft Natural Ergonomic Keyboard 4000. It has a row of useful special keys on top of it (see pic). Some of them do work in elementary OS 5.0, for instance, Mail button launches default mail app, Volume buttons adjust audio volume. However, Keys #1-5 (the row of 5 long buttons in the middle) don't seem to work in any app, as well as the Calculator button - despite the presence of a stock Calculator app in elementary OS. When I try to assign any system shortcut or a custom shortcut in System Preferences/Keyboard/Shortcuts Panel, elementary OS does not accept them as valid, displaying 'Disabled' when I press them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: how can I program/assign custom shortcuts for all of these special keys in elementary OS? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9oFzp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9oFzp.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="16827" LastEditDate="2019-04-29T17:27:28.693" LastActivityDate="2019-12-09T05:44:10.473" Title="How to assign apps/commands to media keyboard keys?" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18846" PostTypeId="1" CreationDate="2019-04-29T16:25:14.240" Score="0" ViewCount="56" Body="&lt;p&gt;I'm trying to install a tool (ST-Link) to write programs to a STM32 micro controller.&lt;br&gt;&#xA;Could you give me a hint how to do it?&lt;/p&gt;&#xA;" OwnerUserId="17998" LastEditorUserId="16827" LastEditDate="2019-04-29T17:23:54.967" LastActivityDate="2024-02-03T15:00:00.917" Title="ST-Link Tool in elementary OS" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18847" PostTypeId="2" ParentId="18846" CreationDate="2019-04-29T17:23:17.110" Score="0" Body="&lt;p&gt;To install stlink in elementary OS, you will have to build it from source code. Please follow the instructions,&lt;/p&gt;&#xA;&lt;p&gt;At first please install these required packages for stlink by executing,&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install build-essential cmake libusb-1.0-dev libgtk-3-dev clang gcc&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then please &lt;a href=&quot;https://github.com/texane/stlink/archive/master.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;download stlink&lt;/a&gt; and extract it to &lt;em&gt;stlink&lt;/em&gt;(you can choose any name, but we will use it in the process.&lt;/p&gt;&#xA;&lt;p&gt;Go to the stlink folder and execute the following commands,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;make release&#xA;make debug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The debug target should only be necessary for people who want to modify the sources and run under a debugger. The top level Makefile is just a handy wrapper for:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;mkdir build &amp;amp;&amp;amp; cd build&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;cmake -DCMAKE_BUILD_TYPE=Debug ..&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;make&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;You could install to a user folder e.g $HOME: &lt;code&gt;cd build/Release; make install DESTDIR=$HOME&lt;/code&gt;&lt;br /&gt;&#xA;Or system wide: &lt;code&gt;cd build/Release; sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Fixing cannot open shared object file&lt;br /&gt;&#xA;When installing system-wide (sudo make install) the dynamic library cache needs to be updated with the command &lt;code&gt;ldconfig&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The above information is grabbed from &lt;a href=&quot;https://github.com/texane/stlink/blob/master/doc/compiling.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;stlink's github repo&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="9699" LastEditDate="2020-09-21T09:52:58.460" LastActivityDate="2020-09-21T09:52:58.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18848" PostTypeId="2" ParentId="18844" CreationDate="2019-04-29T17:44:02.280" Score="0" Body="&lt;p&gt;Please open terminal pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; and execute &lt;code&gt;xrandr -q&lt;/code&gt; to see the connected displays and their current resolution.&lt;br&gt;&#xA;Then execute &lt;code&gt;xrandr --output &amp;lt;monitor_name&amp;gt; --mode &amp;lt;resolution&amp;gt;&lt;/code&gt; to change resolution. For example, &lt;code&gt;xrandr --output eDP-2-1 --mode 2560x1440&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-29T17:44:02.280" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18849" PostTypeId="2" ParentId="18842" CreationDate="2019-04-29T18:04:44.490" Score="1" Body="&lt;p&gt;Please go to the &lt;em&gt;System Settings&lt;/em&gt; and select &lt;em&gt;Power&lt;/em&gt;. After that please change the option for &quot;Turn of the display when inactive for&quot; to &lt;em&gt;Never&lt;/em&gt;. Please be sure to do this for both &lt;em&gt;On Battery&lt;/em&gt; and &lt;em&gt;Plugged In&lt;/em&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you might want to check the options for closing lid cause if they are set to suspend or something like that, closing lid can cause you problem too. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-29T18:04:44.490" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18851" PostTypeId="1" CreationDate="2019-04-29T19:18:48.360" Score="0" ViewCount="46" Body="&lt;p&gt;Sometimes the DE crashes while I move a file in a different directory. If I switch shell typing Ctrl+Alt+F2, to reboot, the prompt asks me to input the password but it does not recognize mine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, since Elementary OS does not allow to set a Super User, How can I do in case everything freezes?&lt;/p&gt;&#xA;" OwnerUserId="16832" LastActivityDate="2019-04-29T19:18:48.360" Title="Pantheon crashes while dragging and dropping" Tags="|release-juno|pantheon|crash|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18852" PostTypeId="1" CreationDate="2019-04-29T19:35:03.137" Score="2" ViewCount="252" Body="&lt;p&gt;I am unable to lock my desktop in Elementary OS, juno. I had earlier installed GNOME desktop and when I tried to remove it, I was left with no desktop environment.&#xA;I then installed xfce desktop environment, followed by pantheon. Although I am able to login into a pantheon environment, I am unable to remove xfce or ubuntu completely and have a pure elementary desktop experience.&#xA;The lock screen also does not work. Using the command 'windows+L' returns nothing, neither does locking screen via the console.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My xsessions returns the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -l /usr/share/xsessions&#xA;&#xA;total 20&#xA;-rw-r--r-- 1 root root  183 Sep 14  2018 pantheon.desktop&#xA;-rw-r--r-- 1 root root  323 May  2  2018 ubuntu-communitheme-snap.desktop&#xA;-rw-r--r-- 1 root root  247 May  2  2018 ubuntu.desktop&#xA;-rw-r--r-- 1 root root 5465 Sep 21  2016 xfce.desktop&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Output for &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep -r --include '*.list' '^deb ' /etc/apt/ | sed -re 's/^\/etc\/apt\/sources\.list((\.d\/)?|(:)?)//' -e 's/(.*\.list):/\[\1\] /' -e 's/deb http:\/\/ppa.launchpad.net\/(.*?)\/ubuntu .*/ppa:\1/'&#xA;&#xA;[miktex.list] deb http://miktex.org/download/ubuntu xenial universe&#xA;[elementary.list] ppa:elementary-os/stable&#xA;[windscribe-repo.list] deb https://repo.windscribe.com/ubuntu zesty main&#xA;[appcenter.list] deb http://packages.elementary.io/appcenter bionic main&#xA;[patches.list] ppa:elementary-os/os-patches&#xA;[spotify.list] deb http://repository.spotify.com stable non-free&#xA;[ubuntuhandbook1-ubuntu-audacity-bionic.list] ppa:ubuntuhandbook1/audacity&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;deb https://dl.winehq.org/wine-builds/ubuntu/ cosmic main&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18000" LastEditorUserId="18000" LastEditDate="2019-04-29T19:44:36.743" LastActivityDate="2019-04-30T07:26:50.763" Title="Unable to lock screen in elementary OS Juno" Tags="|release-juno|greeter|pantheon|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18853" PostTypeId="5" CreationDate="2019-04-29T19:43:03.220" Score="0" Body="&lt;p&gt;A calendar is a system of organizing days for social, religious, commercial or administrative purposes. This is done by giving names to periods of time, typically days, weeks, months and years. A date is the designation of a single, specific day within such a system.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-29T19:43:03.220" LastActivityDate="2019-04-29T19:43:03.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18854" PostTypeId="4" CreationDate="2019-04-29T19:43:03.220" Score="0" Body="For questions related to issues with Calendar on elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-29T19:43:03.220" LastActivityDate="2019-04-29T19:43:03.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18855" PostTypeId="5" CreationDate="2019-04-29T19:45:09.410" Score="0" Body="&lt;p&gt;In computer programming, a third-party software component is a reusable software component developed to be either freely distributed or sold by an entity other than the original vendor of the development platform. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-29T19:45:09.410" LastActivityDate="2019-04-29T19:45:09.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18856" PostTypeId="4" CreationDate="2019-04-29T19:45:09.410" Score="0" Body="For questions related to third party apps in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-04-29T19:45:09.410" LastActivityDate="2019-04-29T19:45:09.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18857" PostTypeId="1" AcceptedAnswerId="18867" CreationDate="2019-04-30T02:31:09.380" Score="0" ViewCount="322" Body="&lt;p&gt;Notice this guys reply here: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/401&quot;&gt;https://elementaryos.stackexchange.com/a/401&lt;/a&gt; - how do I compress / combine into a single shortcut?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By using the &lt;code&gt;wmctrl&lt;/code&gt; app, we can show / hide desktop in Elementary OS. How do I create a custom command shortcut that'll use same hotkey, to trigger both commands?&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;wmctrl -k on&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;wmctrl -k off&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;It would be a beautiful thing if I could just use SUPER + D to trigger toggle commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CJyzP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CJyzP.png&quot; alt=&quot;compress shortcut and combine into one...&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed there is an available docklet, i'd really just like to use the &quot;desktop docklet&quot; and keybind that specific docklet to a hotkey. Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17753&quot;&gt;https://elementaryos.stackexchange.com/a/17753&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here is location for &lt;code&gt;Launcher=docklet://desktop&lt;/code&gt; in file explorer:  &lt;code&gt;/home/phenom/.config/plank/dock1/launchers/&lt;/code&gt; but when I double click, i try to copy / paste that into terminal, nothing works.. so i reckon it doesn't work in shortcut either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe I can create a script to run that plank docklet and assign shortuct?&lt;/p&gt;&#xA;" OwnerUserId="17987" LastEditorUserId="17987" LastEditDate="2019-04-30T03:15:02.937" LastActivityDate="2019-04-30T14:44:13.947" Title="How do I create a toggle custom command shortcut to &quot;show desktop&quot; and &quot;hide desktop&quot;? Combine two shortcuts that view / hide desktop into one" Tags="|keyboard-shortcuts|command-line|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18859" PostTypeId="2" ParentId="18852" CreationDate="2019-04-30T07:26:50.763" Score="1" Body="&lt;p&gt;Please execute the series of commands from the terminal,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge xfce4&#xA;sudo apt-get purge ubuntu-desktop&#xA;sudo apt-get autoremove&#xA;sudo snap remove communitheme&#xA;sudo apt-get autoremove&#xA;sudo apt-get clean&#xA;sudo apt-get autoclean&#xA;sudo apt-get -f install&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here we are removing xfce desktop, ubuntu desktop, community theme, cleaning the system and making an update &amp;amp; upgrade after that.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-30T07:26:50.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18860" PostTypeId="1" CreationDate="2019-04-30T09:12:55.123" Score="1" ViewCount="368" Body="&lt;p&gt;I'm a long time Mac user, Elementary is very elegant and the minimal aspect great&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still some functions are essential... I'm missing the &lt;em&gt;brightness controls&lt;/em&gt;. I tried every keyboard shortcut and looked Elementary's &quot;system preferences&quot; several times but couldn't find any command to adjust brightness  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing 3rd party tools to adjust brightness didn't work either because they were outdated and the only software &lt;code&gt;Dimmer&lt;/code&gt; available on the &quot;app store&quot; didn't go along with Night light: if night light switches on, dimmer switches off and vice versa. Furthermore, &lt;code&gt;Dimmer&lt;/code&gt; doesn't dim very much even on Max, therefore I'm basically without brightness control. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I played with the idea to install another kernel but...in a virtual machine. Anyway I don't like such experiments as Elementary shouldn't need such &quot;unofficial hacks&quot; self contained as it &lt;em&gt;should&lt;/em&gt; be&lt;/p&gt;&#xA;" OwnerUserId="18004" LastActivityDate="2019-04-30T12:03:22.357" Title="No brightness controls after fresh install" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-01T05:05:53.053" ContentLicense="CC BY-SA 4.0" />
  <row Id="18861" PostTypeId="2" ParentId="18806" CreationDate="2019-04-30T09:40:50.823" Score="0" Body="&lt;p&gt;Maybe you should consider a disk partition of your Mac hd&#xA;Open &lt;code&gt;Disk Utility&lt;/code&gt;and add a new partition (I used 100gb), format your new partition to &quot;windows fat&quot;&#xA;Download &quot;balena etcher&quot; for Mac&#xA;flash a 5-gb USB stick using &quot;balena etcher&quot; with your &lt;strong&gt;elementary.iso&lt;/strong&gt;&#xA;Boot your Mac pressing and keeping the alt/opt key after the system chime &#xA;Selecting your stick to boot from&#xA;Once your Mac runs Juno from your USB stick, install Juno from there to your partition you created before on your Mac hd&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Juno is great. I found many good software which can replace Mac. The minimalism in Juno and it's applications helps us to fully focused on our workflow. &lt;/p&gt;&#xA;" OwnerUserId="18004" LastActivityDate="2019-04-30T09:40:50.823" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18862" PostTypeId="2" ParentId="18860" CreationDate="2019-04-30T12:03:22.357" Score="1" Body="&lt;p&gt;Please click on the battery icon from &lt;a href=&quot;/questions/tagged/wingpanel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wingpanel&amp;#39;&quot; rel=&quot;tag&quot;&gt;wingpanel&lt;/a&gt;(top bar) you will be able to increase or decrease the screen brightness from there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if you go to &lt;a href=&quot;/questions/tagged/system&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;system&amp;#39;&quot; rel=&quot;tag&quot;&gt;system&lt;/a&gt; &lt;a href=&quot;/questions/tagged/settings&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;settings&amp;#39;&quot; rel=&quot;tag&quot;&gt;settings&lt;/a&gt; and then &lt;a href=&quot;/questions/tagged/power&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;power&amp;#39;&quot; rel=&quot;tag&quot;&gt;power&lt;/a&gt;, you can see another bar to increase or decrease the screen brightness. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps. Please do let me know what you find.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-30T12:03:22.357" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18863" PostTypeId="1" CreationDate="2019-04-30T12:14:09.517" Score="0" ViewCount="936" Body="&lt;p&gt;When I installed Nordvpn on my windows PC it installed easily.  In elementary I downloaded the package and tried to install from the terminal after Gdebi failed to install it.  In terminal it got as far as reading packages but stopped with an &quot;unsupported file&quot; error message.&lt;/p&gt;&#xA;" OwnerUserId="18005" LastEditorUserId="18048" LastEditDate="2019-05-06T16:12:59.707" LastActivityDate="2020-10-29T07:50:23.693" Title="Has anyone installed Nordvpn in elementary OS 5, if so how?" Tags="|software-installation|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18865" PostTypeId="2" ParentId="18863" CreationDate="2019-04-30T13:26:40.943" Score="1" Body="&lt;p&gt;Please &lt;a href=&quot;https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/nordvpn-release_1.0.0_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;download the version of nordvpn&lt;/a&gt; and open a terminal window pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; and execute the following commands,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/Downloads&#xA;sudo apt-get install ./nordvpn-release_1.0.0_all.deb&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please note that we are changing directory to &quot;Downloads&quot; because this is where the downloaded files are stored by default and we will have to execute the two following commands from where the file is saved. If you manually saved the norvpn file somewhere else, please change working directory to that directory instead. For example, &lt;code&gt;cd &amp;lt;some_other_dir&amp;gt;&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-30T13:26:40.943" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18867" PostTypeId="2" ParentId="18857" CreationDate="2019-04-30T14:44:13.947" Score="0" Body="&lt;p&gt;If I understand your question correctly, this will help.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Please go to system settings, and click keyboard. &lt;/li&gt;&#xA;&lt;li&gt;After that click on the Shortcuts tab and select custom. &lt;/li&gt;&#xA;&lt;li&gt;Now please click the &quot;+&quot; icon and paste this &lt;code&gt;/usr/bin/com.github.spheras.desktopfolder show-desktop&lt;/code&gt; in the command field and click on Disabled to assign shortcut. &lt;/li&gt;&#xA;&lt;li&gt;Here, press any combination you like to add and you are good to go. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-04-30T14:44:13.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18868" PostTypeId="1" CreationDate="2019-04-30T15:57:29.440" Score="0" ViewCount="171" Body="&lt;p&gt;I manually installed Firefox Developer Edition, added it to the dock, and set it as my default browser. All was good, but now it displays a secondary gear icon in the dock when I open it by clicking a link elsewhere in the OS:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yEPUM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yEPUM.png&quot; alt=&quot;screenshot of my dock after Firefox is opened through an external click.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My default browser choice in settings also shows the gear icon. What's going on?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/7Ms17.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7Ms17.png&quot; alt=&quot;screenshot of my Applications settings pane.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit with two details to add:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;No matter which way Firefox Dev launches, it keeps its state&#xA;(remembering open tabs, etc.). So if it launches via an external&#xA;click of a URL, then I quit and reopen using the dock icon, it still&#xA;has that tab open.&lt;/li&gt;&#xA;&lt;li&gt;If I already have Firefox Dev open via the dock or Applications launcher and then I click a link in another program, it opens a new&#xA;tab in the open Firefox Dev instance and does not add that other&#xA;icon to the dock.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="18006" LastEditorUserId="18006" LastEditDate="2019-04-30T17:11:54.480" LastActivityDate="2019-07-30T20:06:44.700" Title="Firefox Dev Edition as Default Browser" Tags="|firefox|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18869" PostTypeId="2" ParentId="17749" CreationDate="2019-04-30T20:24:28.830" Score="1" Body="&lt;p&gt;It is not possible to rollback changes when upgrading from Loki to Juno. This is because it is impossible to upgrade from Loki to Juno from within the system like upgrading on Linux mint. The best method of updating from Loki to Juno is backing up all system files and does a fresh installation. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-04-30T20:24:28.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18870" PostTypeId="2" ParentId="7936" CreationDate="2019-04-30T20:34:03.953" Score="1" Body="&lt;p&gt;This can be solved by deleting your program files folder then reinstalling Opera to guarantee that all the program files are perfect and not corrupted. If this does not solve the issue, try renaming profile folders so that Opera creates new ones, and then check if it works fine. After this, you might have to remain with the new profile or try to fix the old profiles, but these two solutions should work. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-04-30T20:34:03.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18871" PostTypeId="2" ParentId="14505" CreationDate="2019-04-30T20:43:05.960" Score="1" Body="&lt;p&gt;You should check wether your current graphics card drivers are up-to-date. Moreover, disabling such drivers can help to see if the issue is fixed. If using the intel-based graphics card, you can use these commands to fix the issue. /etc/default/grub and add acpi osi=linux to GRUB_CMDLINE_LINUX=. The run update-grup, it should work properly. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-04-30T20:43:05.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18872" PostTypeId="2" ParentId="16458" CreationDate="2019-04-30T20:51:54.623" Score="1" Body="&lt;p&gt;The problem can be fixed by manipulating xrandr. You should in input these commands to double the pixels enabled in settings. Hopefully, this will fix the issue with scaling after changing resolutions. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output DP-1 scale 2x2&#xA;xrandr --output DP-1 --scale 0.5x0.5&#xA;xrandr --output DP-1 --scale 1x1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17999" LastEditorUserId="578" LastEditDate="2019-04-30T22:56:18.040" LastActivityDate="2019-04-30T22:56:18.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18873" PostTypeId="2" ParentId="18745" CreationDate="2019-04-30T21:02:39.263" Score="1" Body="&lt;p&gt;To fix the screen tearing issue, one has to edit or create this file located /usr/share/X11/xorg.confi.d/20-intel.conf as root, then add the following:&#xA;Section &quot;Device&quot;&#xA;Identifier &quot;Intel Graphics&quot;&#xA;Driver &quot;Intel&quot;&#xA;Option &quot;AccelMethod&quot; &quot;sna&quot;&#xA;Option &quot;TearFree&quot; &quot;true&quot;&#xA;Option &quot;DRI&quot; &quot;3&quot;&#xA;EndSection&#xA;This should fix the tearing by disabling the graphics card from purging. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-04-30T21:02:39.263" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18875" PostTypeId="1" CreationDate="2019-05-01T08:12:21.717" Score="1" ViewCount="599" Body="&lt;p&gt;I just recently swapped to Elementary OS and I planned to stay, however I am getting a terrible browsing experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time I use Firefox it will at some point crash and die, with weird graphical issues.  I have run it in the terminal to see what exactly was happening.  I have been swapping between distro's and this is the first time I have seen this which makes me think it has something to do specifically with how Elementary OS is constructed, apologies if this is not the case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output to the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sandbox: Unexpected EOF, op 0 flags 02400302 path /dev/shm/org.mozilla.ipc.17256.41&#xA;Sandbox: bad read from pid 17256: Message too long&#xA;[Child 17256, Main Thread] WARNING: failed to open shm: Input/output error: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 1588, 0, 12, 740&#xA;[Child 17256, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, -1, 12, 232&#xA;[Child 17256, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;... (about 60-70 more lines of this before following)&#xA;[Parent 17031, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;&#xA;(firefox:17031): dconf-CRITICAL **: 16:33:48.340: unable to create file '/run/user/1000/dconf/user': Too many open files.  dconf will not work properly.&#xA;&#xA;(firefox:17031): dconf-CRITICAL **: 16:33:48.340: unable to create file '/run/user/1000/dconf/user': Too many open files.  dconf will not work proper&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I decided to take a look at /run/user/1000/dconf/user, and found that this is a tmpfs set up by systemd.  The default is for this to run at 10% of ram which gave me 3GB, I have doubled this to 6GB, I didn't think that this would fix it but figured it couldn't hurt.  'df' more or less shows that this is a red herring:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Filesystem              Size  Used Avail Use% Mounted on&#xA;udev                     16G     0   16G   0% /dev&#xA;tmpfs                   3.2G  1.8M  3.2G   1% /run&#xA;/dev/mapper/sdb1_crypt   66G   19G   47G  29% /&#xA;tmpfs                    16G   49M   16G   1% /dev/shm&#xA;tmpfs                   5.0M  4.0K  5.0M   1% /run/lock&#xA;tmpfs                    16G     0   16G   0% /sys/fs/cgroup&#xA;/dev/sda1               472M  149M  299M  34% /boot&#xA;/dev/mapper/sda2_crypt  698G   70G  629G  10% /home&#xA;/dev/mapper/sdb2_crypt   55G  4.8G   50G   9% /home/bit/ssd&#xA;tmpfs                   6.3G   68K  6.3G   1% /run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My /dev/shm has 16G.  I have 32GB of ram so it seems fairly unlikely to me that this is a memory issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I checked inode usage, and there seems to be millions of those as well:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Filesystem             Inodes IUsed IFree IUse% Mounted on&#xA;udev                     4.0M   596  4.0M    1% /dev&#xA;tmpfs                    4.0M  1.1K  4.0M    1% /run&#xA;/dev/mapper/sdb1_crypt    33M  248K   33M    1% /&#xA;tmpfs                    4.0M    75  4.0M    1% /dev/shm&#xA;tmpfs                    4.0M     6  4.0M    1% /run/lock&#xA;tmpfs                    4.0M    18  4.0M    1% /sys/fs/cgroup&#xA;/dev/sda1                122K   355  122K    1% /boot&#xA;/dev/mapper/sda2_crypt   350M   85K  349M    1% /home&#xA;/dev/mapper/sdb2_crypt    28M    91   28M    1% /home/bit/ssd&#xA;tmpfs                    4.0M    37  4.0M    1% /run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have googled for shared_memory_posix.cc, line 142 errors, but google comes up with errors on a differnet line 129.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I am a bit stuck.  I was previously on Gentoo, and this didn't happen, and on Kubuntu, and it didn't happen there either.  I used chromium for a couple hours, I'm not sure how long I need to use it for but this didn't seem to occur on chromium.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then thought maybe I'm hitting file open cap as the error seems to indicate but I'm not sure what is happening under hood here as I already seem to be exceeding this limit...&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ulimit -n&#xA;1024&#xA;lsof | wc -l&#xA;529778&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm debating whether or not to increase this...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Firefox crashed while I was writing this here some more terminal output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;...&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;[Child 4114, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 349, 240, 729, 1630&#xA;[Child 4114, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 349, 240, 729, 1630&#xA;[Child 5341, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, -1, 12, 610&#xA;[Child 5341, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, 0, 1588, 888&#xA;Sandbox: Sandbox: bad read from pid 4114: Message too longUnexpected EOF, op 2 flags 00 path /etc/localtime&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;...&#xA;Sandbox: Sandbox: Unexpected EOF, op 1 flags 04 path /usr/share/fonts/truetype/open-sans/OpenSans-Regular.ttfbad read from pid 6797: Message too long&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.429: failed to create cairo scaled font, expect ugly output. the offending font is 'Open Sans 9'&#xA;usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.429: font_face status is: file not found&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.429: scaled_font status is: file not found&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.429: shaping failure, expect ugly output. shape-engine='PangoFcShapeEngine', font='Open Sans 9', text='●'&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.433: failed to create cairo scaled font, expect ugly output. the offending font is 'Open Sans 9'&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.433: font_face status is: file not found&#xA;(/usr/lib/firefox/firefox:6797): Pango-WARNING **: 08:23:23.433: scaled_font status is: file not found&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed to lock new back buffer.&#xA;[Parent 4048, Main Thread] WARNING: failed to open shm: Too many open files: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[Parent 4048, Gecko_IOThread] WARNING: Message needs unreceived descriptors channel:7fb58ff99000 message-type:3473517 header()-&amp;gt;num_fds:1 num_fds:0 fds_i:0: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 536&#xA;[Child 6797, Chrome_ChildThread] WARNING: pipe error (32): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;Exiting due to channel error.&#xA;###!!! [Parent][MessageChannel] Error: (msgtype=0x1E0087,name=PBrowser::Msg_Destroy) Channel error: cannot send/recv&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (3360): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (3371): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;[Child 4114, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 1588, 0, 12, 740&#xA;[Child 4114, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, -1, 12, 610&#xA;...&#xA;[Child 4114, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, 0, 30, 30&#xA;IPDL protocol Error: Received an invalid file descriptor&#xA;...&#xA;IPDL protocol Error: Received an invalid file descriptor&#xA;Sandbox: Sandbox: Unexpected EOF, op 0 flags 02400302 path /dev/shm/org.mozilla.ipc.5341.414bad read from pid 5341: Message too long&#xA;[Child 5341, Main Thread] WARNING: failed to open shm: Input/output error: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 1588, 0, 12, 740&#xA;...&#xA;[Child 5341, Main Thread] WARNING: failed to open shm: Broken pipe: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/base/shared_memory_posix.cc, line 142&#xA;[GFX1-]: Failed buffer for 0, 0, 30, 30&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (1963): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (42): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (2572): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;[Parent 4048, Gecko_IOThread] WARNING: pipe error (3362): Connection reset by peer: file /build/firefox-6m4fHv/firefox-66.0.3+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 357&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Firefox version:&#xA;Firefox Quantum&#xA;66.0.3 (64-bit)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS:&#xA;Elementary OS 5.0 Juno (64-bit)&#xA;Linux 4.15.0-48-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit update:&#xA;I found the following link to a redhat bug report:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugzilla.redhat.com/show_bug.cgi?id=1680318&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.redhat.com/show_bug.cgi?id=1680318&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm now debating whether to uninstall firefox and compile it myself to see if I can get it to compile...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also find some weak links in a very old report that is probably unrelated:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/mountall/+bug/566788&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/mountall/+bug/566788&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have any idea?&lt;/p&gt;&#xA;" OwnerUserId="18009" LastEditorUserId="18030" LastEditDate="2019-05-03T14:48:37.567" LastActivityDate="2019-05-10T14:37:58.110" Title="Failed to open shm/Too many open files error with Firefox" Tags="|release-juno|firefox|" AnswerCount="1" CommentCount="3" ClosedDate="2019-05-10T15:14:36.483" ContentLicense="CC BY-SA 4.0" />
  <row Id="18876" PostTypeId="1" CreationDate="2019-05-01T10:33:42.017" Score="0" ViewCount="31" Body="&lt;p&gt;I wanted to upgrade from Loki to Juno, with a low bandwidth internet connection, and to save time and effort, etc. So, I tried to use the method from this link:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16482/update-from-loki-to-juno-stable&quot;&gt;Update from Loki to Juno stable?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, something went wrong and I ended up with a black login screen without a field to enter password. So, returning to good old plan B, I decided to go with the option of a clean installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please see steps below, to help me identify the mistake and also for a chronology of events:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Step 1: install loki again (since i had a bootable flash drive with&#xA;loki)&lt;/li&gt;&#xA;&lt;li&gt;Step 2: install unetbootin&lt;/li&gt;&#xA;&lt;li&gt;Step 3: prepare a bootable flash drive with Juno&lt;/li&gt;&#xA;&lt;li&gt;Step 4: boot and fast forward to installation options&lt;/li&gt;&#xA;&lt;li&gt;Step 5: select 'something else' and choose hard disk partitions for /, home and swap&lt;/li&gt;&#xA;&lt;li&gt;Step 6: select a 50GB partition with loki to format and install /, select remaining part of the hard disk for /home without formatting to retain old home folder of loki from before the decision to upgrade (did I mention that I don't have any backup of this folder?), setup a small swap.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now, when I boot into Juno, I see that /home folder draws a blank. 180 GB data remains hidden somewhere. I have come across variations of this problem, but it was easier for others, since, it showed up a separate partition in most cases.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance. Please ignore errors in formatting this question.&lt;/p&gt;&#xA;" OwnerUserId="18010" LastActivityDate="2019-05-01T10:33:42.017" Title="home folder and its contents remain on the partition, after clean install for upgrade to Juno, but inaccessible" Tags="|release-loki|release-juno|updates|home|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18877" PostTypeId="1" CreationDate="2019-05-01T10:36:54.927" Score="0" ViewCount="24" Body="&lt;p&gt;I'd like more screen real estate on my 4K connected monitor, &#xA;&lt;br&gt;how can I get this done?&#xA;&lt;br&gt;&#xA;(You can do this on the mac display setting)&lt;/p&gt;&#xA;" OwnerUserId="18011" LastActivityDate="2019-05-01T10:36:54.927" Title="Screen real estate enlargment" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18878" PostTypeId="2" ParentId="16335" CreationDate="2019-05-01T15:03:55.830" Score="2" Body="&lt;p&gt;The easiest way is to use the graphics-drivers ppa.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will have to run the following commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That will enable you to add ppa's to your repositories. After that you need to run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running the second command (or rebooting/waiting for the system to update repositories by itself), new drivers will appear in the AppCenter. You can install them there, or alternatively, you can install via terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find out &lt;strong&gt;which driver&lt;/strong&gt; is the &lt;strong&gt;correct one,&lt;/strong&gt; go to &lt;a href=&quot;https://www.nvidia.co.uk/Download/index.aspx?lang=en-uk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.nvidia.co.uk/Download/index.aspx?lang=en-uk&lt;/a&gt; and select your graphics card. E.g. for Titan X (Pascal) it will show you (at time of this writing) the 418 series driver (version 418.56). Generaly you can obtain best results with the version shown. &lt;strong&gt;Do not download&lt;/strong&gt; the driver from there, but rather install the appropriate version from the AppCenter, or in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-driver-418&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot your computer, and you should be able to run the NVIDIA X Server Settings app, and your card should appear there correctly...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Note:&lt;/em&gt; You can try to install the driver from the Nvidia site, but you can also run into all sort of problems with that and if you are capable to get it working that way, you probably would not ask such questions here. You can also experiment with other driver versions, but you should make sure the relevant driver will support your card. With 1060Ti you can also try the newest 430 series, but that driver is still under development, so it may contain bugs and not be that stable - but on the other hand you may get better performance out of it... The best way how to test various drivers is to first uninstall the previous one and then install the new one. You should not have multiple driver versions installed at the same time.&lt;/p&gt;&#xA;" OwnerUserId="17845" LastActivityDate="2019-05-01T15:03:55.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18879" PostTypeId="2" ParentId="14025" CreationDate="2019-05-01T17:38:19.760" Score="0" Body="&lt;p&gt;Add these 3 lines at the end of &lt;code&gt;~/.profile&lt;/code&gt; file. Then logout and login again. Ibus-Avro should work&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export GTK_IM_MODULE=ibus&#xA;export XMODIFIERS=@im=ibus&#xA;export QT_IM_MODULE=ibus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should add them to &lt;code&gt;~/.profile&lt;/code&gt; instead of &lt;code&gt;~/.bashrc&lt;/code&gt; file, since &lt;code&gt;~/.profile&lt;/code&gt; is sourced during graphical login.&lt;/p&gt;&#xA;" OwnerUserId="5054" LastActivityDate="2019-05-01T17:38:19.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18882" PostTypeId="2" ParentId="18177" CreationDate="2019-05-02T09:28:29.230" Score="1" Body="&lt;p&gt;To make WiFi appear in your Network Settings after a fresh Juno 5.0 install, try connecting to the Internet via Ethernet cable first. Then let your system update itself. Reboot. After that you will see the Wifi icon appear in the upper-right menubar panel. Then you can unplug your Ethernet cable and connect via Wifi only.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Dear elementary OS developers! Please fix this annoying WiFi absence after the fresh elementary OS install! Not everyone has an Ethernet port these days!)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-05-02T09:28:29.230" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18884" PostTypeId="2" ParentId="18566" CreationDate="2019-05-02T18:38:50.710" Score="1" Body="&lt;p&gt;So, this is not much of an answer, but I ran several updates of the OS, &lt;code&gt;sudo apt update&lt;/code&gt; and &lt;code&gt;sudo apt upgrade&lt;/code&gt;. I also the built-in updater in Elementary. I am not sure which update did it, but now I can log into wifi hot spots. My solution for other new users unclear why it isn't working is to make sure everything is up to date. The fix may already be implemented but hasn't reached you yet. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I blame linear time. &lt;/p&gt;&#xA;" OwnerUserId="17717" LastActivityDate="2019-05-02T18:38:50.710" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18885" PostTypeId="2" ParentId="13969" CreationDate="2019-05-02T20:03:57.350" Score="2" Body="&lt;p&gt;Same problem in 2019, Elementary OS Juno, vmplayer 15.&#xA;But running &lt;code&gt;GTK_CSD=0 vmplayer&lt;/code&gt; on terminal works for me.&lt;/p&gt;&#xA;" OwnerUserId="18027" LastActivityDate="2019-05-02T20:03:57.350" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18886" PostTypeId="1" CreationDate="2019-05-02T21:53:14.990" Score="1" ViewCount="68" Body="&lt;p&gt;So basically the trouble its that every time that i wake the laptop, after i put my password it stays in this black screen for 4-7 seconds, i was thinking that this was because i was using a hdd, but now i'm with a ssd and this stayed, it happens independently of the use of the computer, even if the computer its without any program open, what can i do?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/m6hx8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m6hx8.jpg&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16544" LastActivityDate="2019-05-02T21:53:14.990" Title="Slow start after suspend" Tags="|laptop|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18887" PostTypeId="1" CreationDate="2019-05-02T23:47:01.153" Score="0" ViewCount="263" Body="&lt;p&gt;I'd like to transit from MacOS to Linux and want to move my data from a Mac to a new machine. What is the best tool to access Mac disks in elementary?&lt;/p&gt;&#xA;" OwnerUserId="18029" LastEditorUserId="16827" LastEditDate="2019-05-03T07:12:26.360" LastActivityDate="2019-05-05T10:19:32.477" Title="How to access data from another operating system files" Tags="|disk-management|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18889" PostTypeId="2" ParentId="16816" CreationDate="2019-05-03T15:56:09.277" Score="0" Body="&lt;p&gt;Ad (2): You can show performance in the wingpanel with the Monitor app (&lt;a href=&quot;https://appcenter.elementary.io/com.github.stsdc.monitor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.stsdc.monitor&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ad (3): There's an app for that as well: (&lt;a href=&quot;https://appcenter.elementary.io/com.github.spheras.desktopfolder&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.spheras.desktopfolder&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="17845" LastActivityDate="2019-05-03T15:56:09.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18890" PostTypeId="2" ParentId="40" CreationDate="2019-05-03T15:58:27.817" Score="3" Body="&lt;p&gt;An option for Juno is the &lt;a href=&quot;https://appcenter.elementary.io/com.github.stsdc.monitor&quot; rel=&quot;nofollow noreferrer&quot;&gt;Monitor app&lt;/a&gt;. It has the ability to show CPU and memory usage in the wingpanel, although just that for the time being...&lt;/p&gt;&#xA;" OwnerUserId="17845" LastEditorUserId="84" LastEditDate="2019-11-24T13:55:46.273" LastActivityDate="2019-11-24T13:55:46.273" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18894" PostTypeId="2" ParentId="18806" CreationDate="2019-05-04T13:56:47.320" Score="0" Body="&lt;p&gt;OK, thanks to a prompt by Jarold I looked at Parallels support and the answer was to up the memory for graphics to 512Mb and Virtual memory to 8Gb PLUS importantly disable 3D graphics acceleration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works quite well at the moment!&lt;/p&gt;&#xA;" OwnerUserId="17954" LastActivityDate="2019-05-04T13:56:47.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18898" PostTypeId="2" ParentId="18887" CreationDate="2019-05-05T05:33:28.803" Score="2" Body="&lt;p&gt;elementary OS is able to &lt;strong&gt;read&lt;/strong&gt; macOS HFS+ disks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to &lt;strong&gt;write&lt;/strong&gt; to HFS+ disks from elementary OS, you need to install some &lt;a href=&quot;https://askubuntu.com/questions/332315/how-to-read-and-write-hfs-journaled-external-hdd-in-ubuntu-without-access-to-os&quot;&gt;additional software&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatively, to avoid any possible mess with HFS+ disks being written to by Linux (and if you don't plan to use your Mac drives for booting your Mac) you can reformat your macOS drives to exFAT file system, which has native read/write support in elementary OS, macOS and Windows 10. &lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="16827" LastEditDate="2019-05-05T10:19:32.477" LastActivityDate="2019-05-05T10:19:32.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18899" PostTypeId="2" ParentId="18389" CreationDate="2019-05-05T11:04:59.700" Score="2" Body="&lt;p&gt;This question is definitely not as trivial as one would think, as there's virtually no documentation and you have to feel your way around the Code sources itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NOTE&lt;/strong&gt;: In this example I'll demonstrate the bare minimum in Vala that compiles, links dynamically against the Code core library and loads into Code with no problems. There is definitely some room for improvements here, as I'm only a beginner when it comes to Meson and Vala things.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;The preparations&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;First thing you have to do is to grab a source release from &lt;a href=&quot;https://github.com/elementary/code&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Download any required dependencies listed in the README.md, then build it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now create your plugin project as usual, with the directory structure as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.&#xA;├── src/&#xA;├── lib/&#xA;└── vapi/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now we need &lt;code&gt;codecore.vapi&lt;/code&gt; and &lt;code&gt;codecore.h&lt;/code&gt; for the built library &lt;code&gt;libcodecore&lt;/code&gt;.&lt;br&gt;&#xA;Go to your &lt;code&gt;&amp;lt;directory with editor's source&amp;gt;/build/src&lt;/code&gt; and copy over the &lt;code&gt;codecore.vapi&lt;/code&gt; and &lt;code&gt;codecore.h&lt;/code&gt; into your project's &lt;code&gt;vapi/&lt;/code&gt; directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now copy over the &lt;code&gt;libcodecore.so.0.0&lt;/code&gt; from the same directory into your project's &lt;code&gt;lib/&lt;/code&gt; directory, but rename it to &lt;code&gt;libcodecore.so&lt;/code&gt; instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, create a &lt;code&gt;meson.build&lt;/code&gt; with the following content:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;project('helloworldplugin', 'vala', 'c')&#xA;&#xA;module_name = 'helloworldplugin'&#xA;cp = find_program('cp')&#xA;&#xA;vapi_dir = join_paths(meson.current_source_dir(), 'vapi')&#xA;add_project_arguments(['--vapidir', vapi_dir], language: 'vala')&#xA;&#xA;libcodecore = meson.get_compiler('c').find_library('codecore', dirs: join_paths(meson.current_source_dir(), 'lib'))&#xA;&#xA;shared_library(&#xA;    meson.project_name(),&#xA;    'src/helloworldplugin.vala',&#xA;    dependencies: [&#xA;        dependency('glib-2.0'),&#xA;        dependency('gobject-2.0'),&#xA;        dependency('gtk+-3.0'),&#xA;        dependency('granite'),&#xA;        dependency('gtksourceview-3.0'),&#xA;        dependency('libpeas-1.0'),&#xA;        libcodecore&#xA;    ],&#xA;    include_directories: include_directories('vapi'),&#xA;    vala_args: ['--pkg=codecore'], # https://github.com/mesonbuild/meson/issues/2103&#xA;)&#xA;&#xA;custom_target(&#xA;    module_name + '.plugin',&#xA;    input: join_paths('src', module_name + '.plugin'),&#xA;    output: module_name + '.plugin',&#xA;    command: [cp, '@INPUT@', join_paths(meson.current_build_dir(), '@OUTPUT@')],&#xA;    install: true,&#xA;    install_dir: ''&#xA;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;At this point we have everything we need to start writing actual plugin.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;The plugin&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Create a file called &lt;code&gt;helloworldplugin.vala&lt;/code&gt; in your project's &lt;code&gt;src/&lt;/code&gt; directory, with the following contents:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;namespace HelloWorld {&#xA;    public class HelloWorldPlugin : Peas.ExtensionBase, Peas.Activatable {&#xA;        // Assigned by Code at runtime, has to be casted to plugin interface object below.&#xA;        public Object object { owned get; construct; }&#xA;&#xA;        Scratch.Services.Interface plugins;&#xA;        Scratch.MainWindow main_window;&#xA;&#xA;        public void update_state() { return; }&#xA;&#xA;        public void activate()&#xA;        {&#xA;            plugins = (Scratch.Services.Interface)object;&#xA;            plugins.hook_window.connect((window) =&amp;gt; {&#xA;                this.main_window = window;&#xA;            });&#xA;&#xA;            print(&quot;hello, world - activate\n&quot;);&#xA;        }&#xA;&#xA;        public void deactivate()&#xA;        {&#xA;            print(&quot;hello, world - deactivate\n&quot;);&#xA;        }&#xA;    }&#xA;}&#xA;&#xA;// Gets picked up by libpeas engine.&#xA;[ModuleInit]&#xA;public void peas_register_types(GLib.TypeModule module) {&#xA;    var objmodule = module as Peas.ObjectModule;&#xA;    objmodule.register_extension_type(typeof(Peas.Activatable),&#xA;                                      typeof(HelloWorld.HelloWorldPlugin));&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now we need some plugin metadata. Create a file and name it &lt;code&gt;helloworldplugin.plugin&lt;/code&gt; with the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Plugin]&#xA;Name=Hello world plugin&#xA;Module=helloworldplugin&#xA;Loader=C&#xA;IAge=2&#xA;Description=Bare-bones hello world plugin&#xA;Authors=Someone&#xA;Copyright=Nope&#xA;Website=https://your.url.here/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note that &lt;code&gt;Module&lt;/code&gt; entry value needs to match your what's between &lt;code&gt;lib&lt;/code&gt; and &lt;code&gt;.so&lt;/code&gt; in the output file that we'll have after this step.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;The build and installation&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;At last! We can build the project. Go to the project's root, execute the following command: &lt;code&gt;meson build &amp;amp;&amp;amp; cd build &amp;amp;&amp;amp; ninja&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll end up inside the &lt;code&gt;build&lt;/code&gt; directory created by Meson.&lt;br&gt;&#xA;Code loads its plugins from &lt;code&gt;/usr/lib/x86_64-linux-gnu/io.elementary.code/plugins/&lt;/code&gt;, which is only writeable as root. I am not aware of any other directories Code looks for to load plugins from. &lt;strong&gt;I would love for someone to prove me wrong on this, though.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All we have to do now is to create a directory called &lt;code&gt;helloworldplugin&lt;/code&gt; in the above- mentioned directory, copy over the &lt;code&gt;helloworldplugin.plugin&lt;/code&gt; and &lt;code&gt;helloworldplugin.so&lt;/code&gt; into that created directory, and we're done. It needs to be done with root privileges:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /usr/lib/x86_64-linux-gnu/io.elementary.code/plugins/helloworldplugin&#xA;sudo cp helloworldplugin.plugin /usr/lib/x86_64-linux-gnu/io.elementary.code/plugins/helloworldplugin/&#xA;sudo cp helloworldplugin.so /usr/lib/x86_64-linux-gnu/io.elementary.code/plugins/helloworldplugin/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;The results&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;To see the results of our work, you need to launch Code from the command line - &lt;code&gt;io.elementary.code&lt;/code&gt; is the command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now go to &lt;code&gt;Preferences -&amp;gt; Extensions&lt;/code&gt; and toggle your plugin on/off. Console output should be similar to this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hello, world - activate&#xA;hello, world - deactivate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Remarks&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you want to spare yourself the typing and get straight to the meat of it, here's the &lt;a href=&quot;https://github.com/Ciastex/elementary-code-plugin-example&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub repository&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18039" LastActivityDate="2019-05-05T11:04:59.700" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18900" PostTypeId="1" CreationDate="2019-05-05T11:47:59.263" Score="1" ViewCount="46" Body="&lt;p&gt;In the email program, I need to update the SMTP address for my single email account. According to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12570/how-do-i-change-the-default-smtp-setting-in-mail-after-an-account-has-been-creat&quot;&gt;this answer&lt;/a&gt; I have to delete my account and re-add it. But the option to delete the account is greyed out, so I can't delete it. I also can't add the same account again. Is there a way to delete the config files for this account?&lt;/p&gt;&#xA;" OwnerUserId="18041" LastEditorUserId="16827" LastEditDate="2019-05-05T17:45:00.760" LastActivityDate="2019-05-05T17:45:00.760" Title="Can't update existing email account, also can't delete it to re-add it" Tags="|release-loki|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18901" PostTypeId="1" CreationDate="2019-05-05T18:03:12.567" Score="1" ViewCount="212" Body="&lt;p&gt;When booting my Dell XPS 15 if I do not manually boot to the &quot;Ubuntu&quot; device by pressing F12 and selecting &quot;Ubuntu&quot; my computer automatically goes into diagnostics mode and runs tests on memory, screen, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a feeling this may have to do with Secure boot or UEFI mode, not sure though. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Happy to provide any information that is necessary.&lt;/p&gt;&#xA;" OwnerUserId="17174" LastEditorUserId="16827" LastEditDate="2019-05-06T05:30:51.257" LastActivityDate="2024-03-29T00:03:05.393" Title="Boot Issues on Dell XPS 15" Tags="|boot|uefi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18902" PostTypeId="1" CreationDate="2019-05-05T18:54:51.773" Score="0" ViewCount="48" Body="&lt;p&gt;This is on a 2012 MacBook Pro. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed what I think is the normal process - Installed windows 10 and then elementary choosing to install side by side.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary boots up fine, but when selecting windows in grub it just goes to a black screen instantly. I have left it for a couple of hours just incase there was something going on in the background but no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried Ubuntu 'boot-repair', and booting from a Windows USB key but none of the boot repair methods worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I &lt;em&gt;think&lt;/em&gt; that both installs are installed with EFI boot if that makes a difference (although I'm not entirely sure what that means)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="18042" LastActivityDate="2019-05-05T18:54:51.773" Title="Cant boot to Windows 10 after installing eOS" Tags="|dual-boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18903" PostTypeId="2" ParentId="10617" CreationDate="2019-05-06T00:49:27.127" Score="1" Body="&lt;p&gt;Always look up for special menu option under the Bluetooth icon. Check on the connected device if there is a &quot;systems Preferences Bluetooth &gt; Show Bluetooth in Menu Bar.&quot; Hold down the shift-Option, click on the icon and find the &quot;Debug&quot; menu. Under the &quot;Debug Option,&quot; you can now reset the Bluetooth module. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-05-06T00:49:27.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18904" PostTypeId="2" ParentId="18624" CreationDate="2019-05-06T00:55:15.080" Score="-1" Body="&lt;p&gt;This can be fixed by using keyboard shortcuts. By default, the super key plus the + key should zoom in or magnify any areas the mouse cursor is located. To zoom out, you should use combine the super key with the -key. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-05-06T00:55:15.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18905" PostTypeId="2" ParentId="18201" CreationDate="2019-05-06T01:03:33.290" Score="1" Body="&lt;p&gt;This should be fixed by entering the following commands to enable the hotkeys for the Russian keyboard layout:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:attent/java-non-latin-shortcuts&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get dist-upgrade&#xA;&#xA;restart unity-setting-daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After then you should restart your computer and check whether the hotkeys are working correctly. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastEditorUserId="16827" LastEditDate="2019-05-06T05:23:52.910" LastActivityDate="2019-05-06T05:23:52.910" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18906" PostTypeId="2" ParentId="17803" CreationDate="2019-05-06T01:12:51.217" Score="1" Body="&lt;p&gt;This can be fixed by checking turning on the keyboard and setting it to pairing mode. Then you should select it in the available devices on the OS, click pair button, wait for a prompt to enter the key, enter 0000, and repeat this process a few times taking 1 to 2 seconds before inputting 0000. After this, the system should recognize and use the Bluetooth keyboard. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-05-06T01:12:51.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18907" PostTypeId="2" ParentId="16665" CreationDate="2019-05-06T01:18:08.200" Score="1" Body="&lt;p&gt;This issue is a problem with the Juno OS, which requires a bug to be submitted for a fix. However, you should install a third-party webcam application to use the camera. One of the best third-party camera applications for Juno OS is Cheese. &lt;/p&gt;&#xA;" OwnerUserId="17999" LastActivityDate="2019-05-06T01:18:08.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18909" PostTypeId="2" ParentId="18659" CreationDate="2019-05-06T05:53:15.773" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/a/1134731/907048&quot;&gt;Dewa Sembiring on askubuntu&lt;/a&gt;,&lt;/p&gt;&#xA;  &#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;Go to tty&#xA;    mode using &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt;, if you can't,&#xA;    insert a live cd then get into &lt;code&gt;chroot&lt;/code&gt;, try to reinstall your&#xA;    &lt;code&gt;plymouth&lt;/code&gt; but before reinstalling the &lt;code&gt;plymouth&lt;/code&gt;, try to reconfigure&#xA;    the &lt;code&gt;plymouth&lt;/code&gt; first,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure plymouth &amp;amp;&amp;amp; sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;    &#xA;    &lt;p&gt;if it doesn't work. then reinstall it,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall plymouth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-05-06T05:53:15.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18910" PostTypeId="1" AcceptedAnswerId="18912" CreationDate="2019-05-06T15:18:24.957" Score="1" ViewCount="28" Body="&lt;p&gt;Every time my system locks or logs out, my user account name gets changed. My last name has two capital letters, like John McSmith. Every time it gets logged out, it is changed to only capitalize the third letter of the last name, like John mcSmith. I find this odd, so I go in to System Settings -&gt; My Account and update it. It appears to save, but then gets rewritten the next time I'm logged out.&lt;/p&gt;&#xA;" OwnerUserId="18006" LastActivityDate="2019-05-06T16:35:32.983" Title="User account name edited with each lock" Tags="|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18911" PostTypeId="2" ParentId="18201" CreationDate="2019-05-06T16:34:09.987" Score="0" Body="&lt;p&gt;Concerning non-working keyboard shortcuts for Russian keyboard layout:&#xA;I have reported this issue to blender developers (see &lt;a href=&quot;https://developer.blender.org/T64197&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;). Based on their answer, this might be OS-specific (i.e. not Linux-specific, but elementary OS-specific) issue, because Russian shortcuts seem to work fine in blender on Ubuntu 18.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;@moderator&lt;/strong&gt; I'd like to report this issue as a bug. Which channel would you suggest as appropriate for this kind of issue? &lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-05-06T16:34:09.987" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18912" PostTypeId="2" ParentId="18910" CreationDate="2019-05-06T16:35:32.983" Score="0" Body="&lt;p&gt;That's odd! Let's try to do this from &lt;a href=&quot;/questions/tagged/terminal&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;terminal&amp;#39;&quot; rel=&quot;tag&quot;&gt;terminal&lt;/a&gt;. Please open a terminal by pressing &lt;kbd&gt;⌘&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; and execute the following command, &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -c &quot;[the name you want]&quot; [your username]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, lets say your &lt;em&gt;username&lt;/em&gt; is &quot;david&quot; and your &lt;em&gt;name&lt;/em&gt; is &quot;John McSmith&quot;,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo usermod -c &quot;John McSmith&quot; david&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will ask for user password, once done you can see the changes in User Account Settings. Please log out now and see if your name is changed again. I hope it won't.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-05-06T16:35:32.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18913" PostTypeId="1" CreationDate="2019-05-06T17:02:25.997" Score="0" ViewCount="237" Body="&lt;p&gt;after 5 years of honored service, I am replacing Freya with the new Juno on my main (server) machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see that the pantheon-files folder color has been changed from the old delicious light blue to this ugly yellow. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to restore the old folder color in pantheon-files?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best&#xA;Pietro &lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2019-05-06T17:02:25.997" Title="Folder colors in juno" Tags="|pantheon-files|folder|color|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18916" PostTypeId="2" ParentId="6715" CreationDate="2019-05-06T20:39:29.007" Score="0" Body="&lt;p&gt;If you have thinkpad go to bios and change &quot;hybrid graphics&quot; to &quot;discrete graphics&quot;.&lt;/p&gt;&#xA;" OwnerUserId="18052" LastActivityDate="2019-05-06T20:39:29.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18917" PostTypeId="1" CreationDate="2019-05-06T22:00:22.570" Score="1" ViewCount="207" Body="&lt;p&gt;I want to change lid closing behavior on Juno to:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When power is connected and the laptop lid is closed, a screen lock or nothing.&lt;/li&gt;&#xA;&lt;li&gt;With the power off (on battery) and closing the laptop lid - suspend.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Currently there's no option to change that so any lid close suspends the laptop irregardless of being on battery or AC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried changing dconf of the corresponding features with dconf editor but Elementary does not respect those changes. Any idea how to achieve those actions in Juno?.&lt;/p&gt;&#xA;" OwnerUserId="18054" LastActivityDate="2020-09-30T22:02:25.373" Title="How to change closing lid behavior on AC and batter on Elementary Juno" Tags="|release-juno|suspend|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18918" PostTypeId="2" ParentId="18664" CreationDate="2019-05-07T10:00:53.877" Score="0" Body="&lt;p&gt;I finally figured it out: the system is missing two packages (in my case), which are not installed by default, but available in the repos. To resolve the issue, just run the following in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install vdpau-va-driver libvdpau-va-gl1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17845" LastActivityDate="2019-05-07T10:00:53.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18919" PostTypeId="2" ParentId="18676" CreationDate="2019-05-07T10:13:39.057" Score="0" Body="&lt;p&gt;You need to be more specific on what hardware do you have. In my case i follow &lt;a href=&quot;https://github.com/lutris/lutris/wiki/Installing-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide for my laptop and amd hardware.&#xA;It will be good to read &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18085/amd-dual-gpu-issue&quot;&gt;this thread&lt;/a&gt; but don't follow instructions blindly, its purely informatively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is &lt;a href=&quot;https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Lenovo-Z50-75-RAM-upgrade-OS-Linux/td-p/4335214&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lenovo Z50-75&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="15493" LastActivityDate="2019-05-07T10:13:39.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18921" PostTypeId="1" CreationDate="2019-05-07T14:19:12.293" Score="1" ViewCount="120" Body="&lt;p&gt;Has there been any progress on making Plank show the &quot;opened application&quot; dots only for the current workspace? There's a request filed as well &lt;a href=&quot;https://bugs.launchpad.net/plank/+bug/1248689&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/plank/+bug/1248689&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is really what is keeping me tied to the awfully performing Gnome with Dash to Dock&lt;/p&gt;&#xA;" OwnerUserId="18057" LastActivityDate="2019-05-07T14:19:12.293" Title="Plank - multiple workspaces behaviour" Tags="|plank|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18922" PostTypeId="5" CreationDate="2019-05-07T18:07:01.107" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;According to &lt;a href=&quot;https://en.wikipedia.org/wiki/Nemo_(file_manager)&quot; rel=&quot;nofollow noreferrer&quot;&gt;Wikipedia&lt;/a&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;Nemo is a free and open-source software and official file manager of&#xA;    the Cinnamon desktop environment. It is a fork of GNOME Files.&lt;/p&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-05-07T18:07:01.107" LastActivityDate="2019-05-07T18:07:01.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18923" PostTypeId="4" CreationDate="2019-05-07T18:07:01.107" Score="0" Body="For questions related issues with Nemo in elementary OS" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-05-07T18:07:01.107" LastActivityDate="2019-05-07T18:07:01.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18925" PostTypeId="1" AcceptedAnswerId="18930" CreationDate="2019-05-07T20:51:50.107" Score="0" ViewCount="58" Body="&lt;p&gt;Mozilla apparently screw up big time last week with a certificate which deactivated every plugins I had installed. The newest update from May 5th fix this issue from what I've read on their website but elementary OS doesn't provide the update. Usually Firefox gets updated via the Application Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can Firefox be updated (without reinstalling and customizing everything).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: no tags in correlation with my issue are working.. why?&lt;/p&gt;&#xA;" OwnerUserId="8475" LastEditorUserId="16827" LastEditDate="2019-05-08T07:45:31.933" LastActivityDate="2019-05-08T08:05:43.877" Title="Firefox doesn't update (since the plugin issue of may 3rd)" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18930" PostTypeId="2" ParentId="18925" CreationDate="2019-05-08T08:05:43.877" Score="0" Body="&lt;p&gt;You are not receiving update using package manager because Firefox is not yet updated to the latest version in &lt;a href=&quot;https://launchpad.net/ubuntu/+source/firefox/&quot; rel=&quot;nofollow noreferrer&quot;&gt;bionic beaver&lt;/a&gt; on which elementary OS Juno is built. As soon as Firefox is updated in the bionic beaver, you will also be able to update it here in elementary OS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a &lt;em&gt;workaround&lt;/em&gt; not solution sadly. But I think its better to follow this instead of messing with installed source because the package will be updated shortly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please download the latest version of Firefox from its official website and extract it a folder. The download file mostl likely come as &lt;em&gt;tar&lt;/em&gt; compressed file. Please open terminal in the directory where your downloaded file is stored and execute &lt;code&gt;tar -xvjf firefox-66.0.5.tar.bz2&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will extract Firefox in &quot;firefox&quot; named folder. Please execute &lt;code&gt;cd firefox&lt;/code&gt; to change directory to that folder and execute &lt;code&gt;./firefox&lt;/code&gt; to launch Firefox. Make sure all instance of old version is closed before you execute last command to fire up new firefox. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;New Firefox will load of everything from the installed-old one. Keep using it until its updated in the repository of Ubuntu. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-05-08T08:05:43.877" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18931" PostTypeId="1" CreationDate="2019-05-08T09:34:08.110" Score="0" ViewCount="74" Body="&lt;p&gt;I'm writing about some confusion on my end regarding how Wingpanel transparency works with respect to different backgrounds.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;What I want:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The effect I am going for on my desktop is reflected by the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uOYi6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uOYi6.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aZt9N.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aZt9N.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can observe, the &quot;menubar&quot; area is completely transparent, and the text is appropriately white, since the background is dark. I can't find an example of black text on an appropriately light background, but ideally the effect would be the same - completely transparent bar, and simply appropriately-contrasted text.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;What I am getting:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Currently, I'm getting the following (new?) undesired effect of a &quot;bar&quot; appearing on certain backgrounds:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/a5vcl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a5vcl.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uCNRK.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uCNRK.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/KEiQy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KEiQy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qPMLI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qPMLI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first two images are elementary-shipped backgrounds, while the latter two are my own desktop backgrounds I'm trying out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No matter what image I upload into the system, I can't appear to get the completely transparent menu bar to appear, as seen in the &quot;What I want&quot; section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My main issue is that there appears to be no obvious rule for when menu bar backgrounds are excluded/included. From the various tests I've been conducting, the behavior seems totally arbitrary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ideally, there would be a setting for a totally solid color menubar, a semi-transparent menubar (what I seem to be getting now, which I do not want), and a completely transparent (no background color) menubar, with appropriately contrasted text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AFAIK there is no dconf settings for what I'm looking for either.&lt;/p&gt;&#xA;" OwnerUserId="18069" LastActivityDate="2019-05-08T09:34:08.110" Title="Menubar/wingpanel transparency behavior" Tags="|wingpanel|menu|dconf|accessibility|desktop-environment|" AnswerCount="0" CommentCount="2" ClosedDate="2019-05-08T10:07:45.007" ContentLicense="CC BY-SA 4.0" />
  <row Id="18932" PostTypeId="1" CreationDate="2019-05-08T13:59:53.383" Score="0" ViewCount="49" Body="&lt;p&gt;I use the Zoom videoconferencing software quite a bit. It works great on Mac OS and on Ubuntu 18.04. On eOS, however, the picture freezes two seconds into the meeting, or the camera is no longer detected and it sends my fan into hyperventilation. Does anyone use Zoom successfully with eOS? &#xA;Thanks!&#xA;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2019-05-09T07:31:10.160" Title="Anyone uses the ZOOM meetup software with eOS?" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18933" PostTypeId="1" AcceptedAnswerId="18942" CreationDate="2019-05-08T14:38:30.047" Score="1" ViewCount="790" Body="&lt;p&gt;may I resize icons and window elements others than just fonts withoutreducing screen resolution&lt;/p&gt;&#xA;" OwnerUserId="18072" LastActivityDate="2019-05-10T06:58:32.797" Title="Does Juno Support Display scaling" Tags="|display|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18934" PostTypeId="1" CreationDate="2019-05-09T00:56:15.170" Score="0" ViewCount="23" Body="&lt;p&gt;Whenever I try to access my files my screen goes blank and I get logged out. When I log back in the only thing that loads is my wallpaper.&lt;/p&gt;&#xA;" OwnerUserId="18075" LastActivityDate="2019-05-09T13:27:57.803" Title="I get loged out when I go into my Files" Tags="|system|files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18935" PostTypeId="2" ParentId="18932" CreationDate="2019-05-09T01:17:23.460" Score="1" Body="&lt;p&gt;No issues here - &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/*release            &#xA;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=5.0&#xA;DISTRIB_CODENAME=juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;updated as of this morning. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using Zoom latest directly from site. I zoom a few times a day for work, can share, am able to control and see. I did have an issue one day where slack and zoom were being controlled by the same dock icon, for some reason it recorded both pids so I just restarted and it worked fine. &lt;/p&gt;&#xA;" OwnerUserId="18076" LastEditorUserId="16827" LastEditDate="2019-05-09T07:31:10.160" LastActivityDate="2019-05-09T07:31:10.160" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18937" PostTypeId="1" CreationDate="2019-05-09T06:35:04.133" Score="1" ViewCount="1349" Body="&lt;p&gt;Plugged in an additional monitor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is it possible to have &lt;code&gt;extended screen&lt;/code&gt; on all workspaces&lt;/p&gt;&#xA;" OwnerUserId="18065" LastActivityDate="2019-08-01T19:28:08.163" Title="Multiple monitors extended screen on all workspace" Tags="|display|hardware|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18938" PostTypeId="1" CreationDate="2019-05-09T10:33:02.927" Score="0" ViewCount="416" Body="&lt;p&gt;My external display only has a 30HZ option...., what's up with that?&#xA;How can I make it 60?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running Juno 5.0 on MP late 2015&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It just seems to work now, I guess an update was posted :?&lt;/p&gt;&#xA;" OwnerUserId="18011" LastEditorUserId="16827" LastEditDate="2019-05-14T14:03:26.827" LastActivityDate="2024-02-04T01:00:45.080" Title="External display stuck at 30hz" Tags="|display|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="18942" PostTypeId="2" ParentId="18933" CreationDate="2019-05-09T13:36:37.797" Score="2" Body="&lt;p&gt;Yes, you can set the scaling factor in the system settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the settings, click on &quot;Displays&quot; and you'll find the scaling factor at the bottom.&lt;a href=&quot;https://i.stack.imgur.com/QyayI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QyayI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just a little note, this feature has been added just recently, so you might want to update your system if the option isn't there on your system.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastActivityDate="2019-05-09T13:36:37.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18945" PostTypeId="2" ParentId="18917" CreationDate="2019-05-09T19:47:17.553" Score="1" Body="&lt;p&gt;Why not use system settings? Let's try to achieve this way,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Please go to the &quot;System Settings&quot; and click &quot;Power&quot;. &lt;/li&gt;&#xA;&lt;li&gt;After that please click &quot;Unlock&quot; and enter your password to unlock some settings.&lt;/li&gt;&#xA;&lt;li&gt;Now please change *lid behavior however you want for battery or plugged in.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Hopefully this will work. I will look forward to your reply.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-05-09T19:47:17.553" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="18946" PostTypeId="1" CreationDate="2019-05-09T22:36:25.473" Score="0" ViewCount="21" Body="&lt;p&gt;It seems to happen on software written on java. For example DBeaver or MySQL Workbench when you run some feature, the emergent window shows with a ghost window background like next image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/88Crq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/88Crq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think is an issue related with GTK libraries. It not avoid to use the apps but sometimes can be annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have someone experimented something similar? How did you fixed it?&lt;/p&gt;&#xA;" OwnerUserId="16971" LastActivityDate="2019-05-10T05:47:10.767" Title="Some programas shows ghost windows" Tags="|window-management|user-interface|gtk|" AnswerCount="0" CommentCount="2" ClosedDate="2019-05-10T10:35:53.810" ContentLicense="CC BY-SA 4.0" />
  <row Id="18947" PostTypeId="1" AcceptedAnswerId="21867" CreationDate="2019-05-09T23:07:20.337" Score="0" ViewCount="911" Body="&lt;p&gt;I have problems with a slow shutdown.  I followed the instructions to reduce the timeout.&lt;br&gt;&#xA;EOS 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I set the timeouts to 9 seconds as answered below but it does not work.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2020-01-24T09:08:14.487" LastActivityDate="2020-01-24T12:56:22.337" Title="Slow shutdown and cannot troubleshoot" Tags="|shutdown|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18951" PostTypeId="2" ParentId="13887" CreationDate="2019-05-10T07:52:06.213" Score="4" Body="&lt;p&gt;How to run .AppImages in Files (elementary OS 5):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Select your .appimage file in Files.&lt;/li&gt;&#xA;&lt;li&gt;Right-click &gt; Properties &gt; Permissions tab&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Execute&lt;/code&gt; button in &quot;Owner&quot; row:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MIzNM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MIzNM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Close&lt;/code&gt; button.&lt;/li&gt;&#xA;&lt;li&gt;Double-click your .appimage file. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-05-10T07:52:06.213" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18952" PostTypeId="2" ParentId="18875" CreationDate="2019-05-10T14:37:58.110" Score="-1" Body="&lt;p&gt;A recent update to Firefox has fixed this for me, so I guess I just needed to be more patient.&lt;/p&gt;&#xA;" OwnerUserId="18030" LastActivityDate="2019-05-10T14:37:58.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18953" PostTypeId="1" AcceptedAnswerId="18955" CreationDate="2019-05-10T19:27:19.377" Score="0" ViewCount="5184" Body="&lt;p&gt;I am a new eOS user and I have never used linux before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My issue is that my speakers don't work (headphones do). I use MSI A88XM-E35 V2 motherboard with Chipset integrated by Realtek® ALC887 and my speakers are Genius SW-2.1 385.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On Windows, I had installed Realtek HD audio drivers from motherboard manufacturer site and when I first plugged those speakers, it didn't work. The 3.5mm jack comes from subwoofer, but when the software auto sellected subwoofer output type, there was no sound. I had to sellect &quot;Front speaker out&quot; to make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, in eOS,the speakers don't work. I decided to install Realtek drivers on linux too. I also like sound equalization so I want to do so even if there was another solution to make those speakers work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sooo I downloaded this &lt;code&gt;/home/user/Downloads/Rt-Linux-HDaudio-5.18&lt;/code&gt; (I can't hyperlink couse it was from official Realtek web and the &lt;a href=&quot;https://captcha.realtek.com/captcha/get/eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJ1c2VyRW1haWwiOiJ0b25kYS5ub3ZhazIwMDNAZ21haWwuY29tIiwiZW5jb2RlX2lkIjoiNWNkMzMzMGU4ZmZlMTcyMGZmOTFhZmRkIiwiaWF0IjoxNTU3MzQ1MDM4LCJleHAiOjE1NTczNDUzMzh9.OTW81jPhBDDROjpvIlHwileDvK61jNiedqNi5HMSvG0&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; was somehow limited - only i was able to use it). It seems like it's made for Ubuntu and it's based on ALSA drivers. They also included pdf installation guide and that's where i got stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Config compile environment&lt;br&gt;&#xA;./configure&lt;br&gt;&#xA;This will check your system which compile capabilities is.&lt;br&gt;&#xA;If you want to compile the HDA driver part only, please follow belowing.&lt;br&gt;&#xA;./configure --with-cards=had-intel&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;./configure&lt;/code&gt; command manifestly cannot be executed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, I would appreciate any help/tip very much even if it wouldn't solve the driver installation issue. If you know how to make my speakers work please help I will be very happy and thankful.&lt;/p&gt;&#xA;" OwnerUserId="18088" LastActivityDate="2019-05-10T20:16:56.273" Title="Realtek HD audio drivers installation" Tags="|audio|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18955" PostTypeId="2" ParentId="18953" CreationDate="2019-05-10T20:16:56.273" Score="0" Body="&lt;p&gt;Don't do that. The realtek drivers are part of your system already. The issue is most likely that the speakers are muted. Check it with &lt;code&gt;alsamixer&lt;/code&gt; on the command line&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-05-10T20:16:56.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18958" PostTypeId="1" CreationDate="2019-05-11T04:43:27.583" Score="1" ViewCount="286" Body="&lt;p&gt;For several years now I have been switching the keyboard layout in all Linux distributions as follows:&#xA;The first fix en (caps lock), the second - ru (shift + caps lock)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -option &amp;quot;grp:switch,grp:shift_caps_switch,grp_led:scroll&amp;quot; -layout &amp;quot;us,ru&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I really would like to continue using this combination, but for the Pantheon environment this method does not work. Please help.&lt;/p&gt;&#xA;" OwnerUserId="18094" LastEditorUserId="84" LastEditDate="2021-07-27T21:13:29.460" LastActivityDate="2021-07-27T21:13:29.460" Title="Using setxkbmap to switch keyboard layouts" Tags="|pantheon|keyboard-layout|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18963" PostTypeId="1" CreationDate="2019-05-12T09:39:28.300" Score="0" ViewCount="4052" Body="&lt;p&gt;I am using elementary OS. When AppCenter is opened, a message is popped up with below message: does not have a Release file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic Release' does not have a Release file.&#xA;&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details**&#xA;&#xA;Also 'sudo apt-get update' gives result as:&#xA;&#xA;Hit:7 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Ign:8 http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic InRelease&#xA;Err:9 http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic Release&#xA;404 Not Found [IP: 91.189.95.83 80] Reading package lists... Done E: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu bionic Release' does not have a Release file. N: Updating from such a repository can't be done securely, and is therefore disabled by default. N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18108" LastEditorUserId="16827" LastEditDate="2019-05-13T06:13:12.407" LastActivityDate="2019-05-13T06:13:12.407" Title="Repository Release' does not have a Release file" Tags="|updates|ppa|" AnswerCount="1" CommentCount="0" ClosedDate="2019-05-13T06:39:16.587" ContentLicense="CC BY-SA 4.0" />
  <row Id="18964" PostTypeId="2" ParentId="18963" CreationDate="2019-05-12T10:15:28.157" Score="3" Body="&lt;p&gt;To solve the error open terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:versable/elementary-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For hash sum mismatch run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18108" LastActivityDate="2019-05-12T10:15:28.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18970" PostTypeId="1" CreationDate="2019-05-13T14:47:02.667" Score="1" ViewCount="743" Body="&lt;p&gt;From the Juno, elementary support iBus as a default input-method-framework.&#xA;Thus, someone who want to type in Hangul(Korean Alphabet) in Juno and using Korean locale(Asia/Seoul with Korean 101/104 keyboard layout).&#xA;You should use ibus-hangul which would be installed while installing Juno.&#xA;In that case, you shoud do this after the installation.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;* system settings - keyboard - Input Method settings&#xA;* delete english keyboard layout (since the bug of ibus) &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sMOGt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sMOGt.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And you need to know as well, there might be an issue with inputting Hangul in some online service and apps like Facebook, and some development tools while using ibus-hangul.&#xA;I would recommend to you to use &lt;strong&gt;nimf&lt;/strong&gt; as your Hangul input method for Korean.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo apt-add-repository ppa:hodong/nimf&#xA;sudo apt update&#xA;sudo apt install nimf nimf-libhangul&#xA;im-config -n nimf&#xA;Logout &amp;amp; Login&#xA;nimf-settings&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But, If you are in other locale , it might not be installed by default.&#xA;In that case, you should install ibus-hangul manually.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ibus-hangul&#xA;im-config -n ibus-hangul&#xA;logout &amp;amp; login&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or it might be better to use nimf as your input method like Korean.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS team needed to implement input method for universial users, so they load iBus as a default input-method-framework for those universial users like Korean, Japanese, Chinese and more...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This guide is for the people who want to input Hangul(Korean Alphabet) but might help for other input methods user as well, I hope so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for reading it.&lt;/p&gt;&#xA;" OwnerUserId="355" LastEditorUserId="16827" LastEditDate="2019-05-14T14:11:46.413" LastActivityDate="2024-03-17T09:01:35.167" Title="How to type in Hangul(Korean Alphabet) in elementary OS Juno?" Tags="|release-juno|input|ibus|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="18971" PostTypeId="1" CreationDate="2019-05-13T20:39:56.647" Score="0" ViewCount="72" Body="&lt;p&gt;I run my system with the big monitor stacked on top of the laptop monitor.  I can not align the monitors in the control panel so they are one on top of the other.  I can only join them at the corners. see image below. how do I align the screens so movement between windows is the same as the physical reality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/srfqe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/srfqe.jpg&quot; alt=&quot;screen shot of monitor alignment problem&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18121" LastActivityDate="2019-05-14T16:51:56.187" Title="vertically stacked monitors do not line up" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18974" PostTypeId="1" CreationDate="2019-05-14T14:09:23.080" Score="0" ViewCount="23" Body="&lt;p&gt;wordpress site doesn't want to open in elementary os, but it opens on windows. The site is hosted on ubuntu 18.04 server and here is the info of the /etc/hosts file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;127.0.0.1       localhost.localdomain   localhost&#xA;::1             localhost6.localdomain6 localhost6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;The following lines are desirable for IPv6 capable hosts&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;::1     localhost ip6-localhost ip6-loopback&#xA;fe00::0 ip6-localnet&#xA;ff02::1 ip6-allnodes&#xA;ff02::2 ip6-allrouters&#xA;ff02::3 ip6-allhosts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18128" LastEditorUserId="16827" LastEditDate="2019-05-14T14:14:10.453" LastActivityDate="2019-05-14T14:14:10.453" Title="WordPress site does not load" Tags="|internet|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="18975" PostTypeId="1" AcceptedAnswerId="18997" CreationDate="2019-05-14T16:50:45.420" Score="0" ViewCount="273" Body="&lt;p&gt;Is there a good task manager similar looking to the Mac OS one. I’ll link an image since I’m using the stack exchange app and it’s giving me errors when uploading a photo&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://tinyurl.com/y3bgvcwx&quot; alt=&quot;image&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="17877" LastEditorUserId="16827" LastEditDate="2019-05-15T13:39:08.183" LastActivityDate="2019-05-17T10:18:36.543" Title="Which Task manager is most similar to the Mac OS task manager" Tags="|applications|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18976" PostTypeId="2" ParentId="18971" CreationDate="2019-05-14T16:51:56.187" Score="-1" Body="&lt;p&gt;Have you clicked and dragged them?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also try using another display management app if the stock one isn’t working. Also try an update &lt;/p&gt;&#xA;" OwnerUserId="17877" LastActivityDate="2019-05-14T16:51:56.187" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18978" PostTypeId="1" CreationDate="2019-05-14T18:35:53.690" Score="1" ViewCount="189" Body="&lt;p&gt;I would like to replace the top left wingpanel &quot;Applications&quot; text with an .svg icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw a post from 2016 but it's not revelant for eOS 5.0 Juno (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6840/how-to-replace-wingpanels-applications-text-with-a-icon-in-freya&quot;&gt;How to replace wingpanel&amp;#39;s &amp;quot;Applications&amp;quot; text with a icon in Freya&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no such thing as &lt;code&gt;.panel-app-button&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anybody have an idea ?&lt;/p&gt;&#xA;" OwnerUserId="18129" LastActivityDate="2019-05-14T18:35:53.690" Title="How to replace &quot;Applications&quot; with the eOS logo?" Tags="|release-juno|wingpanel|applications|icons|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18980" PostTypeId="1" CreationDate="2019-05-14T19:04:04.223" Score="0" ViewCount="67" Body="&lt;p&gt;I have Elementary OS 5 Juno installed in my desktop and my laptop and some hours ago I did an update of the system and after restarting the equipment they do not complete the boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment I am trying to make them back up and I will put more details about the hardware as soon as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am assuming that the problem is related to the update because when trying to do a reinstallation of the system it presents several errors after downloading the packages, during the execution of the installation scripts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing another distribution on the same hardware worked normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Desktop Hardware: AMD FX8320x, VGA AMD R9 380x 4GB Gigabyte, Mobo Gigabyte 970A-DS3P, 8GB DDR3 (4x2 2200mhz), SSD Sandisk 480GB 'SSDA480G&quot;, USB microsoft mouse and keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Laptop: Dell Inspiron 3421 (i3, 1Tb HD, 12Gb ram)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Customizations:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I'm using the &lt;a href=&quot;https://launchpad.net/~oibaf/+archive/ubuntu/graphics-drivers&quot; rel=&quot;nofollow noreferrer&quot;&gt;OIBAF&lt;/a&gt; repo for updated AMD/intel drivers in both setups&lt;/li&gt;&#xA;&lt;li&gt;In desktop I'm using the kernel 5.x from Ubuntu kernel testing repo&lt;/li&gt;&#xA;&lt;li&gt;My laptop is almost elementary Juno &quot;vanilla&quot; only added Gimp and some Snaps (skype, telegram, shotcut) - but none of theese have any update in days.&lt;/li&gt;&#xA;&lt;li&gt;On desktop I'm running Windows 10 in the same SSD with no problems&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;:&#xA;As I commented, I have a Windows 10 installed in the same HD as this Juno and to eliminate hardware problems, I just ran several stress sequences with HeavyLoad and the PC stayed 10 minutes at maximum memory and processor load without getting unstable .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NLNU8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NLNU8.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I still can not explain what happened with Elementary that was installed, but it was only possible to perform a new installation after deleting the existing partitions with GParted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the moment I'm using Juno with official sources and flathub without any problems, both on desktop and notebook.&lt;/p&gt;&#xA;" OwnerUserId="17657" LastEditorUserId="16827" LastEditDate="2019-05-15T13:37:14.967" LastActivityDate="2019-05-15T13:37:14.967" Title="Broken system after update" Tags="|release-juno|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18981" PostTypeId="1" CreationDate="2019-05-15T06:09:11.197" Score="2" ViewCount="27" Body="&lt;p&gt;Previous to Juno, my retina 13 got some liquid spilled. I cleaned it then the service said they didn't know how to fix it - it boots only in safe mode on osx.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I installed Juno , (I manage to enter GUI via grub cmdline option nomodeset. If I remove it - I have graphics artefacts and it's unusable)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;inxi says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device-1: Intel 3rd Gen Core processor Graphics driver: N/A&#xA;Display: x11 server: X.Org 1.19.6 driver: fbdev,intel unloaded: modesetting,vesa&#xA;resolution: 2560x1600~93Hz&#xA;OpenGL: renderer: llvmpipe (LLVM 8.0 256 bits) v: 3.3 Mesa 19.0.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I guess it's running a non-accelerated framebuffer driver, I have only 1 resolution (2560x1600), pixel doubled (1280x800) or not, no brightness control. Fullhd works acceptably well although high cpu on Chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried adding some other resolutions via cvt and xrandr add mode/new mode, also xorg.conf, but once I switch to them nothing happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the output of xrandr:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr: Failed to get size of gamma for output default&#xA;Screen 0: minimum 2560 x 1600, current 2560 x 1600, maximum 2560 x 1600&#xA;default connected primary 2560x1600+0+0 0mm x 0mm&#xA;2560x1600 93.00*&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if I enable modesetting driver it's unusable, lots of artefacts and it crashes - I enabled it via xorg.conf file by specifying driver &quot;modesetting&quot; - system is up to date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also installed the intel driver via Device Driver Manager app from Linux Mint but it appears X crashes (not sure here)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The question is how can I add some other resolution and go about the brightness control via fbdev driver or other options to make the best use of this laptop (as I can't use it anymore under OSX apparently)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance and nice distro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some other details: &#xA;My xorg.0.log file (graphic related stuff) :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/florin0x01/13e9d43c75bd1aa9e24a1d3d7aeb5fc1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My xorg conf file situated in /etc/X11/xorg.conf.d/20-intel.conf (Although I don't think it affects anything) : &lt;a href=&quot;https://gist.github.com/florin0x01/1f962e912b72d54d9384ff2a7b9bcb1a&quot; rel=&quot;nofollow noreferrer&quot;&gt;Link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT]: Also tried installing an updated driver via &lt;a href=&quot;http://Mesa%2018.2.8%20link&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2019/01/install-mesa-18-2-8-ppa-ubuntu-18-04-18-10/&lt;/a&gt; but it's unusable (black screen with artifacts). I think it is a hardware problem but how do I go around it, namely to have multiple resolutions + brightness adjust, even with the fbdev driver if no other options?&lt;/p&gt;&#xA;" OwnerUserId="18134" LastActivityDate="2019-05-15T06:09:11.197" Title="Graphics on retina 13 which only booted in osx safe mode" Tags="|release-juno|macbook|intel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18983" PostTypeId="1" CreationDate="2019-05-15T10:26:02.783" Score="0" ViewCount="811" Body="&lt;p&gt;The last time I worked in Elementary OS, GKSU could be installed. However I see it no longer has an install candidate. Is there way I can get Xampp runner to launch, without having to invoke a terminal window to input the password (It requires permissions to run).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Functionally it works, but really breaks the experience. So many app make use of the system GUI to input the password if they need running, however without GKSU I cant seem to get this right. The bellow article has the original reference&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10430/add-custom-launcher&quot;&gt;Add custom launcher&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2019-10-18T09:03:10.487" Title="Launching XAMPP from menu" Tags="|thirdpartyapps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="18986" PostTypeId="1" CreationDate="2019-05-15T12:32:59.937" Score="0" ViewCount="357" Body="&lt;p&gt;I just install elementary OS Juno on my Hp 14 laptop. It generally works, but from time to time I get a white or green line at the top of the screen, I think that the problem is the graphic card, it is an Intel graphic card&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Graphics:  Card: Intel Device 3185  &#xA;           Display Server: x11 (X.Org 1.19.6 )  &#xA;           drivers: modesetting (unloaded: fbdev,vesa)  &#xA;           Resolution: 1366x768@60.06hz  &#xA;           OpenGL: renderer: Mesa DRI Intel UHD Graphics 600 (Geminilake 2x6)  &#xA;           version: 4.5 Mesa 18.2.8  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I do not know How to solve the problem, but I would really like to stay with this Os because I think that it is great&lt;/p&gt;&#xA;" OwnerUserId="18139" LastEditorUserId="16611" LastEditDate="2019-05-19T22:34:31.423" LastActivityDate="2019-10-16T23:01:00.133" Title="Problem with the screen in elementary OS Juno" Tags="|release-juno|display|graphic-drivers|graphics|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18987" PostTypeId="2" ParentId="18986" CreationDate="2019-05-15T15:16:55.477" Score="1" Body="&lt;p&gt;Try doing a system update, also maybe try checking the display settings. If both are normal I would try looking at your bios.&lt;/p&gt;&#xA;" OwnerUserId="17877" LastActivityDate="2019-05-15T15:16:55.477" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="18988" PostTypeId="1" AcceptedAnswerId="19005" CreationDate="2019-05-15T15:20:03.170" Score="3" ViewCount="1200" Body="&lt;p&gt;I have an iPhone 6s and would like it to work like how it does when I plug it into windows (file manager detects it and I can see photos) is there a way of doing this or a program like iTunes?&lt;/p&gt;&#xA;" OwnerUserId="17877" LastActivityDate="2019-05-19T15:05:02.230" Title="How do I manage iPhone on elementary os" Tags="|settings|applications|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18990" PostTypeId="2" ParentId="3280" CreationDate="2019-05-15T19:19:06.723" Score="1" Body="&lt;p&gt;Yes, Pixel Saver stop working in new Gnome&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But &lt;a href=&quot;https://extensions.gnome.org/extension/1287/unite/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Unite&lt;/a&gt; works well on Ubuntu 19.04. One more alternative is &lt;a href=&quot;https://extensions.gnome.org/extension/1732/gtk-title-bar/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gtk-title-bar&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18142" LastActivityDate="2019-05-15T19:19:06.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18992" PostTypeId="2" ParentId="18312" CreationDate="2019-05-16T07:11:08.460" Score="-2" Body="&lt;p&gt;Might have to flash your motherboards firmware, or possible storage issue. What are the system specs? What were you doing prior to the system crash? You may have to re-install your os on a separate partition after your bios recognizes your configuration, did you try running an ubuntu 18.04 usb repair disk utility? I recommend you take a look at these articles &lt;a href=&quot;https://linuxhint.com/rufus_bootable_usb_install_ubuntu_18-04_lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxhint.com/rufus_bootable_usb_install_ubuntu_18-04_lts/&lt;/a&gt; and &lt;a href=&quot;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18145" LastEditorUserId="18145" LastEditDate="2019-05-16T07:25:26.057" LastActivityDate="2019-05-16T07:25:26.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18993" PostTypeId="1" CreationDate="2019-05-16T08:24:55.320" Score="0" ViewCount="24" Body="&lt;p&gt;The sound from hdmi works good, but in settings, my external speakers dont get listed at all. Anyone have a &lt;/p&gt;&#xA;" OwnerUserId="18147" LastActivityDate="2019-05-16T14:43:03.420" Title="External speakers don't get listed/recognized" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18994" PostTypeId="2" ParentId="18993" CreationDate="2019-05-16T14:43:03.420" Score="-1" Body="&lt;p&gt;Try unplugging and replugging them in or try to find Linux drivers for them&lt;/p&gt;&#xA;" OwnerUserId="17877" LastActivityDate="2019-05-16T14:43:03.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18997" PostTypeId="2" ParentId="18975" CreationDate="2019-05-17T10:10:53.133" Score="2" Body="&lt;p&gt;I don't know how similar it is compared to the MAC OS one, but &lt;a href=&quot;https://appcenter.elementary.io/com.github.hannesschulze.optimizer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Optimizer&lt;/a&gt; may have some of the Mac OS' task manager features. There is also &lt;a href=&quot;https://appcenter.elementary.io/com.github.stsdc.monitor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Monitor&lt;/a&gt; but it's pretty simplistic.&lt;/p&gt;&#xA;" OwnerUserId="18151" LastEditorUserId="18151" LastEditDate="2019-05-17T10:18:36.543" LastActivityDate="2019-05-17T10:18:36.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="18999" PostTypeId="1" CreationDate="2019-05-17T23:27:14.853" Score="1" ViewCount="41" Body="&lt;p&gt;I'm testing out Elementary OS as a gaming desktop distro and I think an Xbox Elite controller may be causing the OS to completely crash and make the mouse and keyboard AND my Razer Orbweaver (small gaming keyboard) completely unresponsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only fix is to hard reset my PC using the reset button. Obviously not ideal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I troubleshoot this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reason I believe the controller is causing the issues:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On two occasions the OS became completely unresponsive the instant I plugged in the controller.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to get it working by having it plugged in already and THEN turning the PC on. Played Mad Max on Steam and it worked great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then this morning I woke up my PC from sleep and it was crashed on the greeting screen and was unresponsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed the LED's on my mouse and keyboard went out as well indicating that perhaps it wasn't even the OS that was unresponsive, but instead the USB ports completely failing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Controller is being plugged into the front port, other peripherals are in the back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't have any high draw devices such as HDD's plugged into USB and I've never had issues in Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I tried unplugging my mouse and keyboard and plugging back in after they were unresponsive and this didn't help.&lt;/p&gt;&#xA;" OwnerUserId="18158" LastActivityDate="2019-05-17T23:27:14.853" Title="Xbox controller seems to cause freezing" Tags="|release-juno|keyboard|mouse|crash|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19001" PostTypeId="1" CreationDate="2019-05-18T02:43:10.370" Score="0" ViewCount="310" Body="&lt;p&gt;mac address of bluetooth device seen no name is seen in juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried restarting the bluetooth services but all I see is mac addresses. Screenshot attached&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H9ZP0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H9ZP0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18065" LastActivityDate="2024-01-24T00:04:36.040" Title="mac address of bluetooth device seen no name is seen" Tags="|bluetooth|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19004" PostTypeId="2" ParentId="19001" CreationDate="2019-05-19T14:08:16.240" Score="0" Body="&lt;p&gt;I’ve had that issue to. Sometimes depending on the device it shows the name but only method I’ve tried is just clicking one until the device connects &lt;/p&gt;&#xA;" OwnerUserId="17877" LastActivityDate="2019-05-19T14:08:16.240" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19005" PostTypeId="2" ParentId="18988" CreationDate="2019-05-19T15:05:02.230" Score="3" Body="&lt;p&gt;If you don't find a solution on the Linux side, consider an IOS app called Phone Drive.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The app will start web and FTP servers on the phone providing direct upload/download access to your Camera Roll. Your other apps can easily &quot;Share&quot; their data with its temp directory, making nearly everything on the phone accessible to any device with a web browser or FTP client.  For all of $1.99.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itunes.apple.com/us/app/phone-drive-file-storage-sync/id431033044&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itunes.apple.com/us/app/phone-drive-file-storage-sync/id431033044&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;fcont&lt;/p&gt;&#xA;" OwnerUserId="18169" LastActivityDate="2019-05-19T15:05:02.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19006" PostTypeId="1" CreationDate="2019-05-19T16:31:11.407" Score="0" ViewCount="33" Body="&lt;p&gt;I'm using a MacBookPro (13 inch, Mid 2010) with a graphic card NVIDIA GeForce 320M 256 MN.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS Juno starts and goes to a black screen with the dock appearing just a few instants.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With the tty terminal I tried to modify GRUB as suggested is several posts, but without results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What about changing the driver of the graphic card and in which way?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best, Pietro&lt;/p&gt;&#xA;" OwnerUserId="18170" LastActivityDate="2019-10-24T00:01:55.207" Title="black screen with the dock appearing just a few instants" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19009" PostTypeId="1" CreationDate="2019-05-20T00:25:46.937" Score="0" ViewCount="132" Body="&lt;p&gt;I just installed elementary OS 5.0. This AM when I try sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the below message, and also when I try to use the Software Updater, I got the same message with an additional line at the end:  &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E:The repository&#xA;  '&lt;a href=&quot;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu&lt;/a&gt;&#xA;  bionic Release' does not have a Release file.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Obj:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                     &#xA;Obj:2 mx.archive.ubuntu.com/ubuntu bionic-updates InRelease                                              &#xA;Ign:3 dl.google.com/linux/chrome/deb stable InRelease                                                    &#xA;Des:4 packages.elementary.io/appcenter bionic InRelease [5 894 B]                                        &#xA;Obj:5 archive.ubuntu.com/ubuntu bionic InRelease                                                         &#xA;Obj:6 security.ubuntu.com/ubuntu bionic-security InRelease                                               &#xA;Obj:7mx.archive.ubuntu.com/ubuntu bionic-backports InRelease                                            &#xA;Obj:8 dl.google.com/linux/chrome/deb stable Release                                                      &#xA;Ign:9 ppa.launchpad.net/grabli66-r/eos/ubuntu bionic InRelease                                           &#xA;Obj:10 archive.ubuntu.com/ubuntu bionic-proposed InRelease                                               &#xA;Obj:11 mx.archive.ubuntu.com/ubuntu bionic-proposed InRelease                                            &#xA;Des:12 packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [165 kB]                       &#xA;Obj:13 archive.ubuntu.com/ubuntu bionic-updates InRelease                                                &#xA;Obj:15 archive.ubuntu.com/ubuntu bionic-backports InRelease                                              &#xA;Ign:16 ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic InRelease                         &#xA;Obj:17 ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease&#xA;Obj:18 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Err:19 http://ppa.launchpad.net/grabli66-r/eos/ubuntu bionic Release          &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:20 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Leyendo lista de paquetes... Hecho                &#xA;W: El objetivo Packages (universe/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (universe/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (universe/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (universe/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (universe/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (universe/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (universe/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (universe/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (universe/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (universe/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (universe/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (restricted/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (restricted/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (restricted/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (restricted/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (restricted/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (restricted/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (restricted/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (restricted/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (main/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (main/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (main/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (main/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (main/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (main/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (main/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (multiverse/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (multiverse/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (multiverse/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (multiverse/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (multiverse/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (multiverse/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (multiverse/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (multiverse/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;E: El repositorio «http://ppa.launchpad.net/grabli66-r/eos/ubuntu bionic Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;W: El objetivo Packages (universe/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (universe/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (universe/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (universe/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (universe/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (universe/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (universe/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (universe/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (universe/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (universe/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (universe/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (universe/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:48 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (restricted/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (restricted/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (restricted/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (restricted/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (restricted/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (restricted/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (restricted/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (restricted/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (restricted/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (restricted/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (main/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (main/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (main/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (main/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (main/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (main/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (main/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (main/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (main/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:46 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-amd64/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-i386/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Packages (multiverse/binary-all/Packages) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-es_MX) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-es) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo Translations (multiverse/i18n/Translation-en) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (multiverse/dep11/Components-amd64.yml) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11 (multiverse/dep11/Components-all.yml) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-small (multiverse/dep11/icons-48x48.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons (multiverse/dep11/icons-64x64.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-hidpi (multiverse/dep11/icons-64x64@2.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo DEP-11-icons-large (multiverse/dep11/icons-128x128.tar) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (multiverse/cnf/Commands-amd64) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;W: El objetivo CNF (multiverse/cnf/Commands-all) está configurado varias veces en /etc/apt/sources.list:50 y /etc/apt/sources.list:52&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18175" LastEditorUserId="2629" LastEditDate="2019-05-20T12:54:30.543" LastActivityDate="2019-05-20T12:54:30.543" Title="Elementary OS Updates issue" Tags="|updates|" AnswerCount="0" CommentCount="2" ClosedDate="2019-05-21T13:35:29.587" ContentLicense="CC BY-SA 4.0" />
  <row Id="19010" PostTypeId="2" ParentId="16977" CreationDate="2019-05-20T12:31:23.460" Score="1" Body="&lt;p&gt;This situation with VLC appeared on my Elementary-Os too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a solution in the &lt;a href=&quot;https://askubuntu.com/questions/1041629/vlc-shows-very-big-icons-and-is-unusable&quot;&gt;Ubuntu forum&lt;/a&gt; and &lt;a href=&quot;https://forum.videolan.org/viewtopic.php?t=144714&quot; rel=&quot;nofollow noreferrer&quot;&gt;videolan forum&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, what you can do is, open a terminal and open the environment file:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo nano /etc/environment&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and add a line to it:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;QT_AUTO_SCREEN_SCALE_FACTOR=0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Save it and reboot your computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This helped me getting VLC in the right scaling.&lt;/p&gt;&#xA;" OwnerUserId="9548" LastActivityDate="2019-05-20T12:31:23.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19012" PostTypeId="1" CreationDate="2019-05-21T00:27:29.007" Score="1" ViewCount="80" Body="&lt;p&gt;I have started to traverse through instructions on KVM installation without realising that I was not SSHing to my server and performing everything on my local machine. I have got as fas as installing the following &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install qemu qemu-kvm libvirt-bin  bridge-utils  virt-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install netplan&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After purging and auto removing I have ended up with a non functional network. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lshw -C network &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;shows my adapter as disabled. After &lt;code&gt;ifconfig up enp3s0&lt;/code&gt; it appears in if config but still not functional. I have tried various configurations. The outcome is that /&lt;code&gt;etc/network/interfaces&lt;/code&gt; is completely ignored by the system because of parameter in &lt;code&gt;NetworkManager.conf&lt;/code&gt;. When I set &lt;code&gt;managed= false&lt;/code&gt;, the interface obtains some strange ipv6 address, but not ipv4 in both static and DHCP configurations. Configuring via GUI did not lead to any significant result. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would really appreciate any advice on this, because the only solution for me now is the full system re-installation, which is not really optimal by any means &lt;/p&gt;&#xA;" OwnerUserId="18184" LastActivityDate="2019-05-21T00:27:29.007" Title="Broken network after KVM installation" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19013" PostTypeId="1" CreationDate="2019-05-21T01:34:12.063" Score="0" ViewCount="3408" Body="&lt;p&gt;Recently I've had to go back to Windows for a few reasons.  &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;being, I wanted to play FF XII the zodiac age; which simply wasn't installing on elementary OS steam.  Steam stated it is not available for my platform.  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Using my work's citrix server to get only network from home was just not seamless.  the latest citrix didn't work and would immediately close upon opening, the older citrix worked, but it just wasn't the same. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;HiDPI scaling really isn't so good on linux.  Elementary OS allows lowdpi which really isn't low dpi but allows native scaling.  It also has HiDPI, which is 2x scaling.  For me 2x scaling is atrocious.  Low scaling is too small.  On Windows I use 150% scaling.  I could get by on 125% as well; but pure 100 is to small.  Then I tried using a program to program any scaling i want; which really isn't perfect.  For example, foobar doesn't scale.  A few other program simply doesn't scale or it would scale, but the overhead writing on the tabs, the maximize/minimize and other stuff don't scale.  The problem literally doesn't exist on Windows.  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now, I don't mind simply booting onto windows just for games.  I also will need microsoft office products for work; though over time, I could get use to the open source one on linux, libre.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can somewhat get use to the citrix issue; though when I really need something critical; i'll have no choice but to boot windows.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But currently, the display scaling issue is bugging me to no end.  It's like I'm fighting the operating system.  Constantly Zooming everything with low dpi to like 150, 160%; for example when surfing the internet, zooming the browser.  OR on Hidpi, I'm constantly minimzing stuff and the banners just take too much of my screen since they are so damn large.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there truly any Global (meaning affects EVERYTHING) scaling software/technique/ terminal entry available on elemetary OS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="17902" LastActivityDate="2022-09-07T22:56:34.787" Title="HiDPI Scaling Issues" Tags="|hidpi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19014" PostTypeId="1" CreationDate="2019-05-21T06:43:41.077" Score="0" ViewCount="188" Body="&lt;p&gt;Hello im trying to install juno on a external usb of 64 gb using this partitions&lt;/p&gt;&#xA;&#xA;&lt;p&gt;disk formatted in MBR and GPT&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for bios boot:&#xA;20 gb ext4 beginning  primary /root&#xA;16 gb swap memory&lt;/p&gt;&#xA;&#xA;&lt;p&gt;select boot intallation on external 64 gb usb in MBR install and when install GRUB2 give Fatal error in GPT before install ask to add the EFI partion of at leas 34 mb this complete the installation but dont start during the restart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;on the pc bios boot i see in on the UEFI boot ubuntu and uefi 64 gb usb but if i select that restart and run the dell performance test or restat using the win10 boot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i tried also to make a partition of 2 mb in gparted for the boot_grub in way to avoid to install the grub on win10 drive but dont work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can someone explain in very simple way how install elementary juno available for all pc UEFI and Legacy on external usb without installing file on win10 drive &lt;/p&gt;&#xA;" OwnerUserId="18186" LastActivityDate="2024-02-27T01:05:55.657" Title="Elementary os Juno intstall external usb" Tags="|uefi|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19015" PostTypeId="1" CreationDate="2019-05-21T13:22:18.307" Score="0" ViewCount="26" Body="&lt;p&gt;the elementary I use, goes into suspend mode even though I'm configuring not to do that.  Just leave the monitor set to shut down in 15 minutes.  The problem is that I always leave some activity running and when I use the machine, I see that the machine is suspended.&lt;/p&gt;&#xA;" OwnerUserId="18187" LastEditorUserId="18187" LastEditDate="2019-05-21T13:32:52.860" LastActivityDate="2019-05-21T13:37:25.820" Title="Machine suspends even if it is not" Tags="|networking|" AnswerCount="1" CommentCount="2" ClosedDate="2019-05-23T08:59:21.200" ContentLicense="CC BY-SA 4.0" />
  <row Id="19016" PostTypeId="2" ParentId="19015" CreationDate="2019-05-21T13:37:25.820" Score="0" Body="&lt;p&gt;This problem has now been resolved.  The link below has the answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/16519/18187&quot;&gt;Solution&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18187" LastActivityDate="2019-05-21T13:37:25.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19018" PostTypeId="1" CreationDate="2019-05-21T19:39:17.427" Score="1" ViewCount="4252" Body="&lt;p&gt;Is there a way to install the amdgpu-pro drivers for elementary juno to improve gaming performance? I'm new to linux and I'm trying to get a picture here: On how to improve the gaming performance and maybe even fix game issues with newer drivers. I know that the standard drivers support my 2x RX-480 but I don't know how good they do this.&lt;/p&gt;&#xA;" OwnerUserId="17846" LastActivityDate="2021-10-16T21:02:05.160" Title="AMDGPU-Pro on Juno to improve performance and compability" Tags="|graphic-drivers|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19019" PostTypeId="1" CreationDate="2019-05-21T20:49:15.990" Score="0" ViewCount="190" Body="&lt;p&gt;Last week I Dualbooted elementary OS alongside windows, and it worked perfectly fine. Today, when I wanted to boot my pc, it got stuck on a grub command line screen. My keyboard doesn't work, I can't press &lt;kbd&gt;f2&lt;/kbd&gt; to get in the bios. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard does work on other computers, so it's not hardware related. When I put a usb stick in the light in the usb doesn't light up. How can I start my pc?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards&lt;/p&gt;&#xA;" OwnerUserId="18190" LastEditorUserId="2629" LastEditDate="2019-05-23T08:55:38.830" LastActivityDate="2019-06-24T08:01:55.290" Title="Stuck on grub screen" Tags="|keyboard|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19020" PostTypeId="1" CreationDate="2019-05-22T06:48:18.283" Score="0" ViewCount="75" Body="&lt;p&gt;I have been using Elementary OS for one year and everything worked fine till last Friday (May 17 2019).&#xA;Now, when I plug a usb key or usb hard-disk, the media does not mount.&#xA;What has been changed in Elementary and how can I go back to the previous configuration?&#xA;Thanks &lt;/p&gt;&#xA;" OwnerUserId="18192" LastActivityDate="2019-06-21T08:01:15.120" Title="usb storage media do not mount anymore" Tags="|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19021" PostTypeId="2" ParentId="19020" CreationDate="2019-05-22T07:15:00.940" Score="1" Body="&lt;p&gt;Oops, the problem was not coming from Elementary but... from Windows.&#xA;I mounted the device manually with sudo mount and it says:&#xA;The disk contains an unclean file system (0,0).&#xA;The file system wasn't safely closed on windows. Fixing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It was the same problem for both my usb-key and my hard-disk.&#xA;Now everything works fine as before.&lt;/p&gt;&#xA;" OwnerUserId="18192" LastActivityDate="2019-05-22T07:15:00.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19022" PostTypeId="1" CreationDate="2019-05-22T14:55:40.213" Score="1" ViewCount="105" Body="&lt;p&gt;Elementary community,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using Acer Predator G30 with Nvidia GTX 1060 but I am having a problem figuring out how to enable external monitor plugged via HDMI because it is not visible in Displays settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I have tested to switch driver from Proprietary to Nouveau and also full reinstall with original Nvidia driver based on this support case &lt;strong&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1674/problem-with-graphics&quot;&gt;Problem with graphics&lt;/a&gt;&lt;/strong&gt; but the monitor is still not detected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally I have also tried open source drivers from ppa:graphics-drivers with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EisnN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EisnN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I have tried to run elementary from live cd and the second monitor worked! Any idea how to use that setup?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Appreciate your help.&#xA;Michal&lt;/p&gt;&#xA;" OwnerUserId="18194" LastEditorUserId="18203" LastEditDate="2019-05-30T19:44:13.010" LastActivityDate="2019-05-30T19:44:13.010" Title="Problem with Nvidia graphic card driver" Tags="|release-juno|graphic-drivers|nvidia|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19023" PostTypeId="2" ParentId="19018" CreationDate="2019-05-22T15:13:49.187" Score="1" Body="&lt;p&gt;I recommend the latest MESA drivers, you could add the official repositories:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:ubuntu-x-swat/updates&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;They work very well in my case, even in games.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BUT if you want to install the proprietary drivers, you must make some modifications in the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First go ahead and download the driver from the official website (AMD).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will need to edit the system file &#xA;&lt;code&gt;/etc/os-release&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;on line 3 of ID=elementary to ID=ubuntu and on line 6 of VERSION_ID = &quot;5.0&quot; to VERSION_ID = &quot;18.04&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;if you are using Eos Juno (open &quot;files&quot; with administrator privileges for to be able to make the change).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then CD with a terminal to the location of the driver and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./amdgpu-pro-install -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(this installs the Base kernel, Accelerated graphics, Multimedia table, Pro OpenGL, Pro Vulkan, Pro OpenCL).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing everything correctly edit the system file &lt;strong&gt;/etc/os-release&lt;/strong&gt; again, on line 3 of ID=ubuntu to ID=elementary and on line 6 of VERSION_ID = &quot;18.04&quot; to VERSION_ID = &quot;5.0&quot; to leave that file as it was before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/_zDLT9wQHmU&quot; rel=&quot;nofollow noreferrer&quot;&gt;install AMD GPU driver&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works pretty good for me, but I prefer to stay with the open MESA drivers because native linux games on steam recommends MESA drivers with vulkan support. For mesa support on open drivers: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install mesa-vulkan-drivers&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="17846" LastEditDate="2019-05-30T16:02:28.933" LastActivityDate="2019-05-30T16:02:28.933" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19025" PostTypeId="2" ParentId="18662" CreationDate="2019-05-22T17:57:28.767" Score="-1" Body="&lt;p&gt;I have the same problem but using the right button to drag works (instead of the default left click).&lt;/p&gt;&#xA;" OwnerUserId="11984" LastActivityDate="2019-05-22T17:57:28.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19028" PostTypeId="1" CreationDate="2019-05-23T05:46:41.827" Score="1" ViewCount="63" Body="&lt;p&gt;From the time I installed the elementary os. Sometimes when I boot my system up then the system does not start, means the booting process does not work as usual so I need to shut down by pressing the power button hard, and after that, the error does not go and it shows as usual. After 4 or 5 attempts the error went away.&#xA;below is some screenshot of the error. It basically says &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;recovering journal&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and it continues infinite times&lt;a href=&quot;https://i.stack.imgur.com/E89S5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E89S5.jpg&quot; alt=&quot;error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/olLdE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/olLdE.jpg&quot; alt=&quot;erro 2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AV4Kl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AV4Kl.jpg&quot; alt=&quot;error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS 5.0 Juno Linux 4.15.0-47-generic GTK+ 3.22.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and my system is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dual-Core Intel® Core™ i3-4005U CPU @ 1.70GHz Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) 8.1 GB memory my laptop which contains ssd and hdd both . And I had completely installed linux on ssd and all goes fine.&lt;/p&gt;&#xA;" OwnerUserId="18113" LastActivityDate="2019-05-23T05:46:41.827" Title="problem while botting up (unable to show plymoth screen)" Tags="|boot|startup|shutdown|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19030" PostTypeId="1" CreationDate="2019-05-23T19:40:25.140" Score="1" ViewCount="316" Body="&lt;p&gt;I have just installed Elementary OS 5.0 and surprised how good it is! There is one annoying thing which is the backlight not working. I have tried different solutions that seemed to have worked for others but not for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I have tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install &lt;code&gt;xbacklight&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;run &lt;code&gt;sudo xmodmap -e 'add mod3 = Scroll_Lock'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;run &lt;code&gt;xset led 3&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;update grub file: &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash acpi_backlight=video&quot;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="18205" LastActivityDate="2019-05-23T19:40:25.140" Title="Keyboard backlight not working" Tags="|keyboard|backlight|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19031" PostTypeId="1" AcceptedAnswerId="19069" CreationDate="2019-05-23T20:38:12.107" Score="1" ViewCount="116" Body="&lt;p&gt;I am using Kdenlive video editor but all my .kdenlive files are shown in Pantheon files with a blank icon. Googling arround and messing with the hicolor icon theme I have some results only if I change the default icon set via ElementaryTweaks to any different then 'elementary'. If I do this no matter that a lot elementary os specific icons are missing, all .kdenlive and .kdenlivetitle files has the corresponding mime type icons. If I revert back to the &quot;elementary&quot; icon theme - again they became blank.. It works like this even if I add corresponding icons application-x-kdenlive.png/.svg into elementary icon theme folder also.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;in order to rebuild icon/mime caches I use &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-icon-caches /usr/share/icons/*&#xA;sudo update-desktop-database&#xA;sudo update-mime-database /usr/share/mime/&#xA;gtk-update-icon-cache&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The mime format is ok, because if I drag a .kdenlive file on the plank, it uses the appropriate icon also, but in Pantheon files the icon remains blank(white rectangle) no matter what I try to do. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-05-29T16:49:03.417" Title="How can I set .kdenlive mime format icon on Elementary os?" Tags="|pantheon-files|icons|mimetype|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19032" PostTypeId="1" CreationDate="2019-05-23T21:31:44.380" Score="0" ViewCount="234" Body="&lt;p&gt;I am not yet ready to switch definitely to Juno, as several apps needed for my work environment are still missing, but nevertheless, i wanted to create an *.iso of my current E. Juno Os. So i did with my home folder (example code):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkisofs -o destination-filename.iso /home/username&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But…the point is i wanted to create an iso from my whole operating system.&#xA;The point is to safe my applications and its documents. How to do that? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked around for awhile and did not find anything useful to backup my OS. After installing systemback from &quot;&lt;a href=&quot;https://code.launchpad.net/~nemh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~nemh&lt;/a&gt;&quot;&#xA;all i got was a waring that pops up all times when i open the &quot;AppCenter&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(i translate from German)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Update download failed&#xA;&#xA;This might happen for external installed software-repositories or caused by a corrupt sources.list file &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would be happy if you could help me also with this issue, as the original problem connects both problems…&lt;/p&gt;&#xA;" OwnerUserId="18004" LastActivityDate="2019-06-23T11:01:10.130" Title="Create ISO from Elementary OS" Tags="|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19033" PostTypeId="2" ParentId="18272" CreationDate="2019-05-23T22:41:47.170" Score="0" Body="&lt;p&gt;&lt;em&gt;If&lt;/em&gt; you have an existing profile that you don't want to lose, and &lt;em&gt;if&lt;/em&gt; you're not using Firefox Sync, you may run into difficulties trying to migrate that profile into the Firefox snap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For what it's worth, I &lt;em&gt;think&lt;/em&gt; I made this problem go away by resetting the toolbar positions. I &lt;em&gt;think&lt;/em&gt;? It seems so... unrelated... but maybe?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That is,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;choose &quot;Customize...&quot; from the hamburger menu, then&lt;/li&gt;&#xA;&lt;li&gt;click the &quot;Restore Defaults&quot; button in the lower-right.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;After upgrading to Juno, I ran into this problem, and it was like &lt;em&gt;driving-me-mad&lt;/em&gt; annoying, but using the snap wasn't an option for me, since I'm running Nightly, and Firefox blocks you from using existing profiles with older versions of Firefox, ostensibly to prevent data corruption.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway today, after &lt;em&gt;either&lt;/em&gt; restoring the default toolbar positions, &lt;em&gt;or&lt;/em&gt; a Nightly update, &lt;em&gt;or&lt;/em&gt; some unrelated OS update, the problem is gone. &lt;code&gt;¯\_(ツ)_/¯&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="13077" LastActivityDate="2019-05-23T22:41:47.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19035" PostTypeId="2" ParentId="19032" CreationDate="2019-05-24T09:54:02.370" Score="1" Body="&lt;p&gt;This might not sound as a direct answer to how to create ISO, but still.&#xA;As far as I understand, you need ISO to create a backup of your current system. If so, you could try making a more reliable system backup via backup software such as &lt;a href=&quot;https://github.com/teejee2008/timeshift&quot; rel=&quot;nofollow noreferrer&quot;&gt;Timeshift&lt;/a&gt; instead, then write backup folder to removable media/DVD/remote disk and use it later if need be.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-05-24T09:54:02.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19041" PostTypeId="1" CreationDate="2019-05-24T21:05:23.737" Score="1" ViewCount="53" Body="&lt;p&gt;No luck installing from USB, all options result in blank/black screen, even tried nouveau.modeset=0 ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May related to video card Radeon RX580?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I note, same hardware (with nVideo graphics) installed previous versions just fine...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mike&lt;/p&gt;&#xA;" OwnerUserId="18216" LastActivityDate="2019-05-24T21:05:23.737" Title="OS 5 Juno install black screen" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19043" PostTypeId="2" ParentId="19019" CreationDate="2019-05-25T07:55:31.253" Score="1" Body="&lt;p&gt;IF&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;your keyboard is USB,&lt;/li&gt;&#xA;&lt;li&gt;and it doesn't respond during BIOS POST (i.e. before GRUB screen),&lt;/li&gt;&#xA;&lt;li&gt;and your USB stick doesn't seem to work too,&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;THEN&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;the issue might be BIOS-related. Presumably, 'USB Legacy Support' (or some other USB support) has been disabled.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Possible workarounds: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;use PS/2 keyboard to access BIOS and check its 'Integrated Peripherals &gt; USB controllers / USB Legacy Support' settings,&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.lifewire.com/how-to-clear-cmos-2624545&quot; rel=&quot;nofollow noreferrer&quot;&gt;reset CMOS&lt;/a&gt;, thus restoring your BIOS to its default settings.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-05-25T07:55:31.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19044" PostTypeId="1" CreationDate="2019-05-25T08:39:08.167" Score="0" ViewCount="332" Body="&lt;p&gt;how can i fix login screen? I don't delete any package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tVXXF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tVXXF.jpg&quot; alt=&quot;Error Image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18220" LastActivityDate="2024-04-02T21:06:45.913" Title="Login Screen Error" Tags="|display|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19045" PostTypeId="1" CreationDate="2019-05-25T08:48:59.120" Score="2" ViewCount="1363" Body="&lt;p&gt;Few days ago I installed Elementary OS on a used laptop, then LibreOffice. I somehow found out how to activate ribbons, but next to the 90s black &amp;amp; white bevels on the menu tabs, most icons have a white background colour:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kKG5p.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kKG5p.png&quot; alt=&quot;Screenshot of LibreOffice&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Later on I watched a Youtube video about office software for Elementary OS and that guy's version looks way better than mine (starting at 0:17):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/v-DpSSXWL0c?t=17&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/v-DpSSXWL0c?t=17&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What's wrong on my side, is there anything I need to adjust in the settings of LibreOffice?&lt;/p&gt;&#xA;" OwnerUserId="18221" LastActivityDate="2021-08-06T03:57:49.937" Title="Why does my LibreOffice look like a 90s Linux GUI?" Tags="|libreoffice|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19046" PostTypeId="1" CreationDate="2019-05-25T16:50:47.763" Score="0" ViewCount="393" Body="&lt;p&gt;I have a problem on my elementary os Juno. So when I want to add a ppa, it answers me :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;arthur@arthur:~$ sudo add-apt-repository ppa:mpstark/elementary-tweaks-daily&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/add-apt-repository&quot;, line 107, in &amp;lt;module&amp;gt;&#xA;    sp = SoftwareProperties(options=options)&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 117, in __init__&#xA;    self.reload_sourceslist()&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 612, in reload_sourceslist&#xA;    self.distro.get_sources(self.sourceslist)    &#xA;  File &quot;/usr/lib/python3/dist-packages/aptsources/distro.py&quot;, line 93, in get_sources&#xA;    (self.id, self.codename))&#xA;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for elementary/juno&#xA;&#xA;And it's the exactly same error when I tried t launch the &quot;Software and Updates&quot; app...&#xA;&#xA;arthur@arthur:~$ software-properties-gtk&#xA;Traceback (most recent call last):&#xA;  File &quot;/usr/bin/software-properties-gtk&quot;, line 100, in &amp;lt;module&amp;gt;&#xA;    app = SoftwarePropertiesGtk(datadir=options.data_dir, options=options, file=file)&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py&quot;, line 115, in __init__&#xA;    SoftwareProperties.__init__(self, options=options, datadir=datadir)&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 117, in __init__&#xA;    self.reload_sourceslist()&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 612, in reload_sourceslist&#xA;    self.distro.get_sources(self.sourceslist)    &#xA;  File &quot;/usr/lib/python3/dist-packages/aptsources/distro.py&quot;, line 93, in get_sources&#xA;    (self.id, self.codename))&#xA;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for elementary/juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So , what should I do ? Thanks, Arthur&lt;/p&gt;&#xA;" OwnerUserId="18225" LastEditorUserId="16827" LastEditDate="2019-05-29T09:06:09.657" LastActivityDate="2019-05-29T09:06:09.657" Title="Error: could not find a distribution template for elementary/juno" Tags="|apt|package-management|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19047" PostTypeId="2" ParentId="19045" CreationDate="2019-05-25T18:56:27.613" Score="1" Body="&lt;p&gt;I asked myself the same thing. For a distro like Elementary Os - which makes the look &amp;amp; feel a priority point, the integration of Libre Writer is simply ugly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use Ghost Writer + Pandoc + Wkhtmltox. None of them in the repo...&lt;/p&gt;&#xA;" OwnerUserId="16832" LastActivityDate="2019-05-25T18:56:27.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19051" PostTypeId="2" ParentId="19006" CreationDate="2019-05-26T22:11:02.277" Score="1" Body="&lt;p&gt;A first auto-answer.&#xA;To disable Nouveau driver follow &lt;a href=&quot;https://linuxconfig.org/how-to-disable-nouveau-nvidia-driver-on-ubuntu-18-04-bionic-beaver-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxconfig.org/how-to-disable-nouveau-nvidia-driver-on-ubuntu-18-04-bionic-beaver-linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now Elementary starts with the graphic page.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nest step, I guess, is to install the correct graphic driver for the hw.&lt;/p&gt;&#xA;" OwnerUserId="18170" LastActivityDate="2019-05-26T22:11:02.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19052" PostTypeId="2" ParentId="19045" CreationDate="2019-05-27T08:40:38.013" Score="4" Body="&lt;p&gt;You can improve LibreOffice's looks and integration into elementary OS by adding the &lt;code&gt;libreoffice-gtk3&lt;/code&gt; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might also like the &lt;code&gt;libreoffice-style-elementary&lt;/code&gt; package that includes better fitting tool icons too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install both, open Terminal and enter the following command.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libreoffice-gtk3 libreoffice-style-elementary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="2753" LastActivityDate="2019-05-27T08:40:38.013" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19053" PostTypeId="1" AcceptedAnswerId="19064" CreationDate="2019-05-27T09:19:12.590" Score="0" ViewCount="109" Body="&lt;p&gt;I have been using elementary Os for almost 6 months. Everything is fine and i love it, but here is the question &#xA;is Elementary Os discontinued ? &lt;/p&gt;&#xA;" OwnerUserId="18234" LastActivityDate="2019-05-28T16:27:35.623" Title="I have been using elementary Os for almost 6 months" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19054" PostTypeId="1" CreationDate="2019-05-27T12:38:51.480" Score="0" ViewCount="201" Body="&lt;p&gt;I want to make the size of the mouse pointer bigger. I tried using &#xA;&lt;code&gt;dconf write /org/gnome/desktop/interface/cursor-size 48&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, nothing happens. Even after a restart, the mouse looks the same. How could I solve this?&lt;/p&gt;&#xA;" OwnerUserId="18215" LastEditorUserId="15904" LastEditDate="2019-05-31T03:07:15.867" LastActivityDate="2024-03-12T05:02:30.280" Title="Cursor Size Won't Change with dconf" Tags="|mouse|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19056" PostTypeId="1" CreationDate="2019-05-27T13:07:04.737" Score="0" ViewCount="208" Body="&lt;p&gt;I tried to open (this video)[&lt;a href=&quot;https://invidio.us/watch?v=BnzYqOn3VkY]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://invidio.us/watch?v=BnzYqOn3VkY]&lt;/a&gt; on invidio.us and the browser dissapeared.&#xA;I wondered how to find a log of the event and all I could think of was tailing dmegs. This is what i found:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;[ 2931.039224] pool[6546]: segfault at 0 ip 00007f52fd54fec7 sp 00007f5230df2ab0 error 4 in libephymain.so[7f52fd50c000+9b000]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a HTML5 issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using current epiphany (Gnome Web 3.281)&lt;/p&gt;&#xA;" OwnerUserId="3348" LastActivityDate="2024-02-01T22:06:50.793" Title="Browser crashed on youtube-frontend site (invidio.us)" Tags="|epiphany|crash|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19057" PostTypeId="1" CreationDate="2019-05-27T15:05:32.367" Score="1" ViewCount="602" Body="&lt;p&gt;I'm wondering if I can get some guidance on how elementary manages audio devices -- especially how it detects them. Do you use Pulse or ALSA? Is there potentially a package missing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my situation, I'm seeing...&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;No Output Device&#xA;  There is no output device detected. You may want to add one to start listening to anything.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;...in System Settings --&gt; Sound. However, &lt;code&gt;aplay -l&lt;/code&gt; shows two Intel HDA cards, and vlc is able to play directly to the audio devices, so I know for sure the hardware is not an issue.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Edit:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;I ran &lt;code&gt;io.elementary.switchboard&lt;/code&gt; from the terminal with &lt;code&gt;G_MESSAGES_DEBUG&lt;/code&gt; set to all, and found a message like &lt;code&gt;pa_context_connect () failed: Connection refused&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="18237" LastEditorUserId="18237" LastEditDate="2019-05-27T17:02:25.737" LastActivityDate="2019-05-27T17:47:17.593" Title="Audio devices working but not showing up in the settings" Tags="|release-juno|settings|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19058" PostTypeId="2" ParentId="19044" CreationDate="2019-05-27T15:24:21.013" Score="0" Body="&lt;p&gt;Wow! That is a very good question. Lets take a look at your configuration files. If you run this command...&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find /etc/lightdm/ -print -type f -exec cat '{}' \; -exec echo \;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it will output all of the files that are used to configure the behavior of your login screen. Here's the output of mine:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;donn@donnslaptop ~&amp;gt; find /etc/lightdm/ -print -type f -exec cat '{}' \; -exec echo \;&#xA;/etc/lightdm/&#xA;/etc/lightdm/lightdm.conf.d&#xA;/etc/lightdm/users.conf&#xA;#&#xA;# User accounts configuration&#xA;#&#xA;# NOTE: If you have AccountsService installed on your system, then LightDM will&#xA;# use this instead and these settings will be ignored&#xA;#&#xA;# minimum-uid = Minimum UID required to be shown in greeter&#xA;# hidden-users = Users that are not shown to the user&#xA;# hidden-shells = Shells that indicate a user cannot login&#xA;#&#xA;[UserList]&#xA;minimum-uid=500&#xA;hidden-users=nobody nobody4 noaccess&#xA;hidden-shells=/bin/false /usr/sbin/nologin&#xA;&#xA;/etc/lightdm/io.elementary.greeter.conf&#xA;[greeter]&#xA;#activate-numlock=true&#xA;#default-wallpaper=/usr/share/backgrounds/elementaryos-default&#xA;#high-contrast=false&#xA;#onscreen-keyboard=false&#xA;#screensaver-timeout=60&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Perhaps some file got shuffled around and changed your theme.&lt;/p&gt;&#xA;" OwnerUserId="18237" LastActivityDate="2019-05-27T15:24:21.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19059" PostTypeId="2" ParentId="19057" CreationDate="2019-05-27T17:47:17.593" Score="1" Body="&lt;p&gt;I have solved this issue for me. The permissions in the home folder were very strange -- &lt;code&gt;root:root&lt;/code&gt; and &lt;code&gt;777&lt;/code&gt;. I changed them to the my user and &lt;code&gt;755&lt;/code&gt; for directories, &lt;code&gt;644&lt;/code&gt; for files, and all works now. If you're running into this and you don't have messed up permissions in your home folder, I recommend you check the solutions in &lt;a href=&quot;https://askubuntu.com/questions/70560/why-am-i-getting-this-connection-to-pulseaudio-failed-error&quot;&gt;this thread&lt;/a&gt; for more information.&lt;/p&gt;&#xA;" OwnerUserId="18237" LastActivityDate="2019-05-27T17:47:17.593" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19060" PostTypeId="1" CreationDate="2019-05-27T20:23:25.300" Score="2" ViewCount="1318" Body="&lt;p&gt;Testing linux and started with Elementary OS. &#xA;I am looking to finalize my install with wireguard. &#xA;I am lost as far as how to install and the name of the package to install wireguard. &#xA;I did run apt-get cache search/list but to no avail. &#xA;Any light on this is much appreciated&lt;/p&gt;&#xA;" OwnerUserId="18238" LastActivityDate="2019-08-03T16:10:35.023" Title="ElementaryOS and Wireguard" Tags="|vpn|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19062" PostTypeId="2" ParentId="19056" CreationDate="2019-05-28T14:51:07.547" Score="0" Body="&lt;p&gt;Epiphany is crashing. To fix the crash, you will need to report a bug to the developers. And to report a bug to the developers, you will need to gather a stack trace of the crash. &lt;a href=&quot;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&quot; rel=&quot;nofollow noreferrer&quot;&gt;See this page&lt;/a&gt; for hints on how to get a stack trace of the crash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are able to acquire a quality stack trace and create a bug report, then point me at it and I will take a look. Without a stack trace, it's not possible to debug.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-05-28T14:51:07.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19063" PostTypeId="1" CreationDate="2019-05-28T15:10:30.067" Score="0" ViewCount="478" Body="&lt;p&gt;Ever since I rebooted my computer, ElementaryOS has no splash screen and instead loads into a &quot;terminal&quot;. It tells me I need to log in, and once I do I only have access to a &quot;terminal&quot;. (It's not a true terminal like URxvt, but instead just a black and white command line).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been messing around with i3 and its counterparts for a couple of days now. Nothing has been wrong with it, from what I can tell. I have been messing around with ~/.Xresources, and I put a xrandr command in some (I have no idea where, sorry) .conf file to change my display refresh rate to 144hz.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I turned my computer off the last time it went directly to a black &quot;underscore&quot; screen instead of turning off completely. I had to turn off the computer manually.&lt;/p&gt;&#xA;" OwnerUserId="18248" LastActivityDate="2024-02-07T07:03:30.367" Title="Login is now through terminal" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19064" PostTypeId="2" ParentId="19053" CreationDate="2019-05-28T16:27:35.623" Score="2" Body="&lt;p&gt;it is not discontinued, the latest version is 5.0 Juno, based on ubuntu 18.04 LTS. I must remind you that eOS is based only on the LTS versions of ubuntu. So when another LTS version of ubuntu comes out we will see some new version of eOS.&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-05-28T16:27:35.623" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19066" PostTypeId="2" ParentId="18056" CreationDate="2019-05-29T06:52:35.870" Score="0" Body="&lt;p&gt;I have similar issues with or without external monitor - HP Pavilion computer.&lt;br&gt;&#xA;All the solutions(?) I already found was until the next day, or restart or whatever situation happens.. The last one I found and it works for now is the script from there &#xA;&lt;a href=&quot;https://gist.github.com/RyanMillerC/c48d9f63f8fe386b22a7da18cf6913d2&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/RyanMillerC/c48d9f63f8fe386b22a7da18cf6913d2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it is important if you try it to make the script executable&#xA; &lt;code&gt;chmod +x /usr/local/bin/set-primary-monitor-pantheon-greeter&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;read the comments there for more information.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-05-29T06:58:58.947" LastActivityDate="2019-05-29T06:58:58.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19067" PostTypeId="2" ParentId="7998" CreationDate="2019-05-29T07:56:37.137" Score="0" Body="&lt;p&gt;Here is a python script that will do the cert separation for you&#xA;&lt;a href=&quot;https://gist.github.com/seebk/bb94a7fd70d4cc454aaa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/seebk/bb94a7fd70d4cc454aaa&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18252" LastActivityDate="2019-05-29T07:56:37.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19069" PostTypeId="2" ParentId="19031" CreationDate="2019-05-29T16:49:03.417" Score="2" Body="&lt;p&gt;Using &lt;code&gt;gtk-update-icon-cache --force /usr/share/icons/elementary&lt;/code&gt; fixed a similar issue for me. Make sure you use the --force option.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-05-29T16:49:03.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19070" PostTypeId="2" ParentId="10458" CreationDate="2019-05-29T17:29:46.577" Score="0" Body="&lt;p&gt;I found the solution to calibrate the monitor, the application is called DisplayCal&#xA;&lt;a href=&quot;https://displaycal.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://displaycal.net/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;You install the .deb application&lt;/li&gt;&#xA;&lt;li&gt;We will create the Color Profile to later install it in the system. In the application menu you can find new applications, open the Synthectic app (It comes included with DisplayCal), a large box will open with a lot of data to modify, leave them intact and click on the pre-established tab (here you can choose the color profile, in my case chose &quot;sRGB&quot; managing to remove the purple tones where the color was blue), and then click on save as and choose the location you want, after installing it you will not need it anymore&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the Display Cal app, normally update boxes appear, you can ignore them, go to the file tab / Install moniror profile and select the .icc file that we created, a box will appear, remember to select &quot;install profile in all the system&quot; and you can install a profile in the system, it will ask for your user password and that's it, go back and open your browser and you'll see the change.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you want, you can un-display DisplayCal and delete the .icc file, since the change is already done&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="18254" LastActivityDate="2019-05-29T17:29:46.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19071" PostTypeId="2" ParentId="18659" CreationDate="2019-05-29T18:13:39.207" Score="1" Body="&lt;p&gt;What helps to me in a similar situation was to reinstall plymouth. I recommend doing it on recovery mode - on the grub bootloader screen select &lt;strong&gt;advanced options for elementary os&lt;/strong&gt; and on the next screen choose the &lt;strong&gt;[recovery mode]&lt;/strong&gt; option. Once there first select '&lt;strong&gt;Configure network&lt;/strong&gt;' in order to have a network connection and after this choose &lt;strong&gt;Root&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once there type in the console &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt install --reinstall plymouth*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The * is necessary because you need to reinstall the plymouth-themes and other packages in order to fix the problem. Only plymouth doesn't worked for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryforums.com/index.php?threads/solved-plymouth-bootsplash-problems.2434/&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-05-30T00:08:22.010" LastActivityDate="2019-05-30T00:08:22.010" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19072" PostTypeId="2" ParentId="19060" CreationDate="2019-05-29T19:40:16.127" Score="3" Body="&lt;p&gt;Since Elementary uses the same package manager as Ubuntu, usually you can follow instructions written for that distribution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: Elementary does not come with software-properties-common installed (which is required for &lt;code&gt;add-apt-repository&lt;/code&gt;), so here's the steps I followed to install it.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo add-apt-repository ppa:wireguard/wireguard&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install wireguard&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.linode.com/docs/networking/vpn/set-up-wireguard-vpn-on-ubuntu/#install-wireguard&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Updated as per comment.&lt;/p&gt;&#xA;" OwnerUserId="18256" LastEditorUserId="18256" LastEditDate="2019-06-03T20:57:10.210" LastActivityDate="2019-06-03T20:57:10.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19073" PostTypeId="2" ParentId="19063" CreationDate="2019-05-29T19:54:29.493" Score="0" Body="&lt;p&gt;It could be that your session manager (elementary uses Pantheon) has failed. When you login to the terminal, do you see anything in journalctl that would raise eyebrows?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If nothing's there, there's some troubleshooting steps at the bottom of their &lt;a href=&quot;https://github.com/elementary/greeter&quot; rel=&quot;nofollow noreferrer&quot;&gt;git page here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18256" LastActivityDate="2019-05-29T19:54:29.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19074" PostTypeId="1" CreationDate="2019-05-30T10:06:47.310" Score="0" ViewCount="139" Body="&lt;p&gt;I can not display multimedia content in some browsers (Epiphany + Vivaldi). Firefox + Chromium works fine. I manually copied the Chromium codec into the Vivaldi directory. Unfortunately, did not help. Can you help me?&lt;/p&gt;&#xA;" OwnerUserId="10546" LastActivityDate="2019-10-03T21:45:53.833" Title="Multimedia-Content" Tags="|release-juno|firefox|epiphany|chromium|multimedia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19076" PostTypeId="1" CreationDate="2019-05-30T11:22:03.670" Score="0" ViewCount="548" Body="&lt;p&gt;system: elementary OS 5.0 Juno HP-Convertible-x360-11-ab1XX&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when trying to update, an error message is displayed:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Failed to receive updates. This may be caused by external (manually added) repositories or a damaged source file.&quot;&lt;br&gt;&#xA;  Details: &quot;E: Repository« &lt;a href=&quot;http://ppa.launchpad.net/slonua/rtl8821ce/ubuntubionic&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/slonua/rtl8821ce/ubuntubionic&lt;/a&gt; Release ”does not contain the Release file.&lt;br&gt;&#xA;  W: Updating from this repository cannot be performed in a secure way, so it is disabled by default.&lt;br&gt;&#xA;  W: For information on creating a repository and user settings, see the apt-secure (8) reference page.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It all started with WIFI not working after installation. OS doesn’t see Realtek RTL8821CE 802.11ac PCIe Adapter after Dancing with Tambourines start WIFI, however, bluetooth did not work and there was a problem with the updates.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;система: elementary OS 5.0 Juno&#xA;HP-Convertible-x360-11-ab1XX&#xA;при попытке обновления выводится сообщение об ошибке: &quot;Не удалось получить обновления. Это может быть вызвано внешними (добавленными вручную) репозиториями или поврежденным файлом с источниками.&quot;&#xA;Подробности:&#xA;&quot;E: Репозиторий «&lt;a href=&quot;http://ppa.launchpad.net/slonua/rtl8821ce/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/slonua/rtl8821ce/ubuntu&lt;/a&gt; bionic Release» не содержит файла Release.&#xA;W: Обновление из этого репозитория нельзя выполнить безопасным способом, поэтому по умолчанию он отключён.&#xA;W: Информацию о создании репозитория и настройках пользователя смотрите в справочной странице apt-secure(8)&quot;&#xA;Началось все с того, чтобы после установки не работал WIFI. OS не видит сетевой адаптер Realtek RTL8821CE 802.11ac PCIe Adapter&#xA;После &quot;танцев с бубнами&quot; удалось запустить WIFI, однако bluetooth так и не заработала и появилась это проблема с обновлениями.&lt;/p&gt;&#xA;" OwnerUserId="18260" LastEditorUserId="26" LastEditDate="2019-05-30T19:40:44.710" LastActivityDate="2020-02-24T21:02:20.330" Title="система не обновляется" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19078" PostTypeId="1" CreationDate="2019-05-30T16:49:13.010" Score="1" ViewCount="293" Body="&lt;p&gt;I occasionally attempt to use &lt;code&gt;Super+P&lt;/code&gt; as a keyboard shortcut for an app I use on Elementary, and instead it triggers the &lt;code&gt;Cycle Display Modes&lt;/code&gt; action, which resets my monitor layout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to change this hotkey to something else? It doesn't appear to be in the keyboard settings, and I can't find it through the dconf-editor either.&lt;/p&gt;&#xA;" OwnerUserId="18262" LastActivityDate="2024-02-07T09:08:06.003" Title="Is there a way to change the &quot;Cycle Display Modes&quot; keyboard shortcut?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19079" PostTypeId="2" ParentId="19076" CreationDate="2019-05-30T19:44:04.817" Score="1" Body="&lt;p&gt;It looks like you've incorrectly added a PPA. Take a look in &lt;code&gt;/etc/sources.list.d&lt;/code&gt; and remove anything that has &lt;code&gt;slonua&lt;/code&gt; in the filename. That PPA only builds for &lt;code&gt;zesty&lt;/code&gt; (17.04) which is EoL and unlikely to fix problems with this specific wi-fi card.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2019-05-30T19:44:04.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19080" PostTypeId="2" ParentId="16544" CreationDate="2019-05-30T23:41:04.033" Score="-1" Body="&lt;p&gt;This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.peripherals.touchscreen orientation-lock true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18265" LastEditorUserId="16827" LastEditDate="2019-05-31T03:06:10.550" LastActivityDate="2019-05-31T03:06:10.550" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19082" PostTypeId="2" ParentId="16544" CreationDate="2019-05-31T03:10:29.637" Score="4" Body="&lt;p&gt;This worked for me but I needed to apply at each start up:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo systemctl stop iio-sensor-proxy.service &#xA;$ sudo systemctl disable iio-sensor-proxy.service &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;-- For persistance I needed this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get remove iio-sensor-proxy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15755" LastEditorUserId="16827" LastEditDate="2019-05-31T03:17:18.110" LastActivityDate="2019-05-31T03:17:18.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19083" PostTypeId="1" AcceptedAnswerId="19096" CreationDate="2019-05-31T09:05:43.050" Score="0" ViewCount="834" Body="&lt;p&gt;In the current Elementary OS version, there is a default wallpaper like this: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/orgwI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/orgwI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: what is the spacecraft in this photo? Is it Soyuz or SpaceX Dragon? And what was it doing at that time? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="15483" LastActivityDate="2019-06-02T19:39:05.783" Title="What is this spacecraft in the Elementary OS default wallpaper?" Tags="|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19084" PostTypeId="1" CreationDate="2019-05-31T09:40:20.827" Score="1" ViewCount="347" Body="&lt;p&gt;As many other Linux users EMACS is an important part of my installation. After installing EMACS on Elementary 5.0 Juno I couldn't manage to open it from the launcher icon, nor from the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Searching the web I discovered that other people had the same problem on other Ubuntu derived distro, and the solution seems to open EMACS  from the cli with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;XLIB_SKIP_ARGB_VISUALS=1  emacs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Although an alias into &lt;code&gt;~/.bashrc&lt;/code&gt; solved the problem. This is quite strange and I still I don't get (my fault) what the issue is, after all EMACS has a central role for many Linux users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can somebody explain this solution, and whether there is a  better way to solve the issue without going through aliases?&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2019-05-31T09:40:20.827" Title="Why emacs require XLIB_SKIP_ARGB_VISUALS=1" Tags="|launcher|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19085" PostTypeId="2" ParentId="19074" CreationDate="2019-05-31T14:06:53.513" Score="1" Body="&lt;p&gt;For Epiphany, you need to install the gstreamer1.0-libav package.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gstreamer1.0-libav&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't known about Vivaldi, sorry.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastEditorUserId="29" LastEditDate="2019-10-03T21:45:53.833" LastActivityDate="2019-10-03T21:45:53.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19086" PostTypeId="2" ParentId="19074" CreationDate="2019-05-31T15:43:29.477" Score="0" Body="&lt;p&gt;to enable the HTML5 proprietary multimedia content you must install support for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Execute the following command in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;curl https://launchpadlibrarian.net/414953672/chromium-codecs-ffmpeg-extra_73.0.3683.75-0ubuntu0.16.04.1_amd64.deb | tail -c + 1077 | tar JxC ~ --wildcards \ * libffmpeg.so --xform 's,. * /,. local / lib / vivaldi /,'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, restart the browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To check that support for proprietary HTLM5 multimedia content is enabled correctly, go to the following page:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://tekeye.uk/html/html5-video-test-page&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://tekeye.uk/html/html5-video-test-page&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Then enjoy your favorite multimedia content, ^^&lt;/p&gt;&#xA;&#xA;&lt;p&gt;References:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://help.vivaldi.com/article/html5-proprietary-media-on-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.vivaldi.com/article/html5-proprietary-media-on-linux/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Important Note: If this solves your problem, DO NOT FORGET to mark this post as resolved.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cya&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-05-31T15:43:29.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19088" PostTypeId="1" CreationDate="2019-05-31T23:39:25.290" Score="0" ViewCount="114" Body="&lt;p&gt;Like a number of users, I have a black screen after updating last month. I have tried a few possible solutions on stackexhange, unfortunately, none worked. If anyone is willing to help, I'd appreciate  it. Just tell me what information you may need from me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I can't avoid a reboot, I would like to back up the HHD. Any advice to do this through terminal?&lt;/p&gt;&#xA;" OwnerUserId="18269" LastActivityDate="2024-02-24T07:07:25.910" Title="Black screen after update" Tags="|release-loki|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19091" PostTypeId="2" ParentId="11883" CreationDate="2019-06-01T06:38:09.100" Score="0" Body="&lt;p&gt;There is &lt;a href=&quot;https://github.com/rhx/SwiftGtk&quot; rel=&quot;nofollow noreferrer&quot;&gt;a different GitHub project&lt;/a&gt; (&lt;a href=&quot;https://github.com/rhx/SwiftGtk&quot; rel=&quot;nofollow noreferrer&quot;&gt;rhx/SwiftGtk&lt;/a&gt;) described as:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;A Swift wrapper around gtk-3.x &amp;amp; gtk-4.x that is largely auto-generated from gobject-introspection.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;It looks to be more complete and up-to-date than the project you found. They have links to sample projects as well.&lt;/p&gt;&#xA;" OwnerUserId="18272" LastEditorUserId="23667" LastEditDate="2021-10-13T08:27:39.217" LastActivityDate="2021-10-13T08:27:39.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19092" PostTypeId="2" ParentId="17785" CreationDate="2019-06-01T19:22:27.907" Score="0" Body="&lt;p&gt;Just press the &lt;code&gt;&amp;quot;Super&amp;quot; key + &amp;quot;o&amp;quot;&lt;/code&gt;, to toggle screen rotation&#xA;(It's &amp;quot;o&amp;quot; as in &amp;quot;oreo&amp;quot; and not zero).&lt;/p&gt;&#xA;" OwnerUserId="18274" LastEditorUserId="18274" LastEditDate="2021-01-10T10:48:47.627" LastActivityDate="2021-01-10T10:48:47.627" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19095" PostTypeId="1" CreationDate="2019-06-02T12:16:51.237" Score="1" ViewCount="26" Body="&lt;p&gt;I've noticed that the icon on the Automatic Suspend notification had changed after installing the Zettlr application. I've noticed this happen with other apps as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vOnbP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vOnbP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to restore the original icon?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;" OwnerUserId="17172" LastActivityDate="2019-06-02T12:16:51.237" Title="How to restore notification icon for Automatic Suspend?" Tags="|notifications|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19096" PostTypeId="2" ParentId="19083" CreationDate="2019-06-02T19:39:05.783" Score="2" Body="&lt;p&gt;This wallpaper was introduced with Elementary OS Loki. This photo is by SpaceX. I'm not sure what it was doing there. But this is SpaceX's Dragon and it's wallpaper was uploaded to &lt;a href=&quot;https://github.com/elementary/wallpapers&quot; rel=&quot;nofollow noreferrer&quot;&gt;Collection of wallpapers for elementary OS - GitHub&lt;/a&gt; 2 years ago with the name &quot;Photo by SpaceX.jpg&quot;. The closest article to this I've found is: &lt;a href=&quot;https://www.wired.com/story/a-spacex-delivery-capsule-may-be-contaminating-the-iss/&quot; rel=&quot;nofollow noreferrer&quot;&gt;SpaceX's Dragon Capsule May Be Contaminating the ISS | WIRED&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="18278" LastActivityDate="2019-06-02T19:39:05.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19097" PostTypeId="2" ParentId="18762" CreationDate="2019-06-02T19:59:41.603" Score="0" Body="&lt;p&gt;It seems you are using some PPA or your &lt;strong&gt;&lt;em&gt;/etc/apt/sources.list&lt;/em&gt;&lt;/strong&gt; is messed up. Elementary OS Juno is based on Ubuntu 18.04 (Bionic). &lt;code&gt;cosmic&lt;/code&gt; in the output looks suspicious. Remove the 3rd party PPA and restore your software sources to official sources and retry installation.&lt;/p&gt;&#xA;" OwnerUserId="18278" LastActivityDate="2019-06-02T19:59:41.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19099" PostTypeId="2" ParentId="19078" CreationDate="2019-06-02T20:55:39.450" Score="0" Body="&lt;p&gt;If I'm not wrong, you can change any system shortcuts by using the System Settings &gt; Keyboard &gt; Shortcuts. For some reason I can't find there Super+P, but I can recommend you to try to reassign it to some Disabled shortcut - you will be asked if you are sure to do that, 'cause it is already reserve so you have to confirm the change and this way it will be released by &lt;strong&gt;Cycle display layout&lt;/strong&gt;. After this you can set the one you just changed again to 'Disabled' (click on it and press enter) and based on my experience (checked again just now) it will not be reassigned to 'Cycle displays'.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-06-02T20:55:39.450" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19100" PostTypeId="2" ParentId="19063" CreationDate="2019-06-02T21:04:01.690" Score="0" Body="&lt;p&gt;I'm not sure you have the same problem, but what I did in order to successfully return to the graphics interface was to reinstall lightdm.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can try before this to reconfigure it also by typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-06-02T21:04:01.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19102" PostTypeId="1" AcceptedAnswerId="19472" CreationDate="2019-06-03T04:51:06.510" Score="5" ViewCount="1555" Body="&lt;p&gt;It's a bit strange to ask, but the situation is: I can easily send from my laptop with elementary OS files via Bluetooth, but I do not understand how to accept a file. The system notifies me that a device is trying to send me a file. I remember with ubuntu with GNOME it suffices to click &quot;accept&quot; to the notification itself, but on eOS any choiche does not appear and clicking on it leads to nothing. So: what to do?&lt;/p&gt;&#xA;" OwnerUserId="18279" LastEditorUserId="18279" LastEditDate="2019-07-08T07:41:46.500" LastActivityDate="2021-08-16T08:42:21.030" Title="How do I accept a file via Bluetooth?" Tags="|pantheon|bluetooth|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19103" PostTypeId="1" CreationDate="2019-06-03T07:33:48.013" Score="0" ViewCount="71" Body="&lt;p&gt;Whats going wrong with elementary OS 5 Juno ? There is NO way to import IPvanish- vpn's. This option (import VPN-connection) works in other Linux-distros without troubles. Why NOT in elementary ? Somebody an idea or an answer ? Is this a intention ? Special thanks.&lt;/p&gt;&#xA;" OwnerUserId="18280" LastActivityDate="2024-02-08T04:03:35.370" Title="NO VPN- import Ipvansish" Tags="|release-juno|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19104" PostTypeId="1" CreationDate="2019-06-03T10:01:29.923" Score="0" ViewCount="166" Body="&lt;p&gt;I installed Juno on a Macbook Late 2007, and even enabling the &quot;English Macintosh&quot; keyboard, the shortcuts are not the same, for example CMD+C and CMD+V to copy and paste, and to enter Latin characters such as &quot;éôãç...&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I resolve this?&lt;/p&gt;&#xA;" OwnerUserId="4155" LastActivityDate="2024-01-15T06:06:05.673" Title="How to enable macOS keyboard shortcuts in Juno?" Tags="|release-juno|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19105" PostTypeId="2" ParentId="19103" CreationDate="2019-06-03T16:33:05.267" Score="0" Body="&lt;p&gt;Fixed: - Solution / import IPVanish VPNs:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after importing the vpn, --&gt; you need the &lt;strong&gt;CA-certificate&lt;/strong&gt; (ca.ipvanish.com.crt) - and it works  :-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;... what a fool I am   ;-)&lt;/p&gt;&#xA;" OwnerUserId="18280" LastActivityDate="2019-06-03T16:33:05.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19106" PostTypeId="2" ParentId="17991" CreationDate="2019-06-03T16:51:49.300" Score="0" Body="&lt;p&gt;I too have this issue on all the touch screen terminals I have running with Juno. I don't know how to fix it, but I did setup a keyboard shortcut to &quot;pkill wingpanel&quot; so staff can reset it if the problem occurs.&lt;/p&gt;&#xA;" OwnerUserId="18282" LastEditorUserId="18282" LastEditDate="2019-06-04T20:13:30.143" LastActivityDate="2019-06-04T20:13:30.143" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19108" PostTypeId="1" CreationDate="2019-06-04T00:58:24.570" Score="0" ViewCount="243" Body="&lt;p&gt;I want to update the repositories and I see these commands.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg: error al procesar el paquete grub-pc (--configure):&#xA; instalado grub-pc paquete post-installation guión el subproceso devolvió un error con estado de salida 128&#xA;dpkg: problemas de dependencias impiden la configuración de grub-efi-amd64-signed:&#xA; grub-efi-amd64-signed depende de grub-efi-amd64 | grub-pc; sin embargo:&#xA;  El paquete `grub-efi-amd64' no está instalado.&#xA; El paquete `grub-pc' no está configurado todavía.&#xA;&#xA;dpkg: error al procesar el paquete grub-efi-amd64-signed (--configure):&#xA; problemas de dependencias - se deja sin configurar&#xA;dpkg: problemas de dependencias impiden la configuración de grub-gfxpayload-lists:&#xA; grub-gfxpayload-lists depende de grub-pc (&amp;gt;= 1.99~20101210-1ubuntu2); sin embargo:&#xA; El paquete `grub-pc' no está configurado todavía.&#xA;&#xA;dpkg: error al procesar el paquete grub-gfxpayload-lists (--configure):&#xA; problemas de dependencias - se deja sin configurar&#xA;Procesando disparadores para libc-bin (2.27-3ubuntu1) ...&#xA;Se encontraron errores al procesar:&#xA; grub-pc&#xA; grub-efi-amd64-signed&#xA; grub-gfxpayload-lists&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I do??&lt;/p&gt;&#xA;" OwnerUserId="17659" LastEditorUserId="16827" LastEditDate="2019-06-04T06:27:58.177" LastActivityDate="2024-03-11T20:03:40.463" Title="update repositories" Tags="|updates|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19109" PostTypeId="1" CreationDate="2019-06-04T04:54:03.937" Score="0" ViewCount="113" Body="&lt;p&gt;I'm new to Linux and I want to try the elementary OS as a replacement for my current OS but I'm not sure if my laptop meets the minimum requirements for elementary OS to run properly. Would be awesome if you guys tell me if my laptop meets the minimum requirements.&lt;/p&gt;&#xA;" OwnerUserId="18284" LastEditorUserId="16827" LastEditDate="2019-06-04T06:40:22.040" LastActivityDate="2024-03-10T10:06:50.930" Title="Is elementary OS Lenovo B41-30 compatible or not?" Tags="|system-installation|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19110" PostTypeId="2" ParentId="19109" CreationDate="2019-06-04T06:54:10.910" Score="0" Body="&lt;p&gt;Here's what &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS' website&lt;/a&gt; says,&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Recommended System Specifications&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;While we don't have a strict set of minimum system requirements, we recommend at least the following specifications for the best experience:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;However, the machine I run elementary OS as primary OS doesn't have SSD but I don't see any problem. It is running smoothly.&lt;/p&gt;&#xA;&lt;p&gt;Now, check your system information if you don't know yet, if your system meet this requirements you can install elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-06-04T06:54:10.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19114" PostTypeId="1" CreationDate="2019-06-05T05:12:35.353" Score="0" ViewCount="975" Body="&lt;p&gt;I cannot disable single click in elementary OS Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo dconf write /org/pantheon/files/preferences/single-click false&lt;/code&gt;&lt;br&gt;&#xA;I tried &lt;code&gt;sudo gsettings set io.elementary.files.preferences single-click false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried dconf editor.But shows no schema available.Changing to false doesn't have any effect. I have attached the screen shot of dconf editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: I don't want to use elementary-tweak tool&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oCJOF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oCJOF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18292" LastEditorUserId="16827" LastEditDate="2019-06-07T11:27:31.870" LastActivityDate="2023-03-10T07:57:35.303" Title="Cannot disable single click in elementary OS Juno" Tags="|release-juno|pantheon-files|dconf|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19115" PostTypeId="1" CreationDate="2019-06-05T06:35:10.990" Score="1" ViewCount="172" Body="&lt;p&gt;I am running 5.0 Juno, and I have a NFS share mounted with settings such that the owner and group can read, write, and execute. On the client machine, the mount command shows the following configuration&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;192.168.1.x:/mnt/pool0/share on /nfs type nfs (rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,nolock,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.1.x,mountvers=3,mountport=698,mountproto=udp,local_lock=all,addr=192.168.1.x)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With these settings, tools like touch, cp, and mkdir work as normal in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In contrast, when using Files to write files to the share, I get the error&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Error opening file “/nfs/Documents/new file”: Operation not permitted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;however, after receiving the error, an empty file is created on the share.&#xA;A second attempt to write the file allows for a full write.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: how do you configure permissions for Files to resolve this error?&lt;/p&gt;&#xA;" OwnerUserId="18293" LastActivityDate="2019-06-05T06:35:10.990" Title="Writing to NFS mounted directory gives 'Operation not permitted' - how to configure permissions?" Tags="|pantheon-files|files|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19118" PostTypeId="1" AcceptedAnswerId="19165" CreationDate="2019-06-05T11:18:00.100" Score="0" ViewCount="159" Body="&lt;p&gt;I use English as my default language and I can change the system font just fine, but I also use Thai language and I don't like the current font how can I change it ?&lt;/p&gt;&#xA;" OwnerUserId="18297" LastActivityDate="2019-09-03T18:11:17.430" Title="How can I change default font for other language?" Tags="|language|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19119" PostTypeId="2" ParentId="19114" CreationDate="2019-06-05T11:38:36.393" Score="1" Body="&lt;p&gt;You can control this behavior using &lt;em&gt;gsettings&lt;/em&gt;. You have edited the correct setting using:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo gsettings set io.elementary.files.preferences single-click false&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Just a small thing: when you run any command with sudo, you are running it as administrator user, not the user you are logged in and, in your case, the setting is changed for the administrator user, and not the user which runs files applcation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Simply, run this command without &lt;em&gt;sudo&lt;/em&gt; and it should work just fine.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gsettings set io.elementary.files.preferences single-click false&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18298" LastActivityDate="2019-06-05T11:38:36.393" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19121" PostTypeId="1" AcceptedAnswerId="19122" CreationDate="2019-06-05T13:21:24.270" Score="1" ViewCount="122" Body="&lt;p&gt;i'm a absolute beginner in Linux so i apologize in advance for my question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all I decided to switch from Windows 10 to Ubuntu. After that I tried the elementary OS distribution, which is in my opinion designed absolute beautiful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I have a problem with the boot time. After the changeover from Ubuntu to elementary OS the boot process is really slow. So after pressing the start bottom there's at first a black screen for some seconds and then appears the elementary OS logo and I don't know why I have this black screen. I already read something about a wrong UUID for the swap partition, but I have no idea how I can find out the problem or change them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe this terminal--output is helpful:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA; / was on /dev/sda1 during installation&#xA;UUID=1c5c8b29-e843-46ab-9115-ab0245414bf6 / ext4    errors=remount-ro 0       1&#xA;/swapfile                                 none            swap    sw              0       0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For help or suggestions, I would be really grateful.&lt;/p&gt;&#xA;" OwnerUserId="18299" LastEditorUserId="16827" LastEditDate="2019-06-07T11:32:07.947" LastActivityDate="2019-06-07T11:32:07.947" Title="Slow boot time after changeover from Ubuntu to elementary OS" Tags="|boot|swap|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19122" PostTypeId="2" ParentId="19121" CreationDate="2019-06-05T14:30:22.017" Score="1" Body="&lt;p&gt;Long boot time can be caused by a lot of things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In first place you should check &lt;em&gt;systemd journal&lt;/em&gt; (systemd is operating system initialization program) by using &lt;code&gt;journalctl -b&lt;/code&gt; command, which will show last system boot log.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can scroll down and look at the timestamps to determine which process takes long time to be completed.&lt;/p&gt;&#xA;" OwnerUserId="18298" LastActivityDate="2019-06-05T14:30:22.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19123" PostTypeId="2" ParentId="19108" CreationDate="2019-06-05T19:59:45.407" Score="0" Body="&lt;p&gt;I want to update the repositories and I see these commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setting up grub-pc (2.02-2ubuntu8.13+elementary8~ubuntu5.0.1) ...&#xA;dpkg: error processing package grub-pc (--configure):&#xA;installed grub-pc package post-installation script subprocess returned error exit status 128&#xA;dpkg: dependency problems prevent configuration of grub-efi-amd64-signed:&#xA; grub-efi-amd64-signed depends on grub-efi-amd64 | grub-pc; however:&#xA;  Package grub-efi-amd64 is not installed.&#xA;  Package grub-pc is not configured yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;dpkg: error processing package grub-efi-amd64-signed (--configure):&#xA; dependency problems - leaving unconfigured&#xA;Errors were encountered while processing:&#xA; grub-pc&#xA; grub-efi-amd64-signed&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I do?&lt;/p&gt;&#xA;" OwnerUserId="17659" LastActivityDate="2019-06-05T19:59:45.407" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19124" PostTypeId="2" ParentId="19013" CreationDate="2019-06-05T23:40:48.297" Score="2" Body="&lt;p&gt;I had a similar problem.  Following a little bit from &lt;a href=&quot;https://askubuntu.com/questions/884249/how-to-generate-config-monitors-xml-file-from-a-script&quot;&gt;https://askubuntu.com/questions/884249/how-to-generate-config-monitors-xml-file-from-a-script&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;'Display Settings' and click 'Apply'.  This will create &lt;code&gt;~/.config/monitors.xml&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In the terminal &lt;code&gt;sudo nano ~/.config/monitors.xml&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add or edit the following inside the &lt;code&gt;&amp;lt;logicalmonitor&amp;gt;&lt;/code&gt; node.  So monitors &gt; configuration &gt; logicalmonitor&#xA;&lt;code&gt;&amp;lt;scale&amp;gt;1&amp;lt;/scale&amp;gt;&lt;/code&gt; making sure that the scale is set to an appropriate scale for you&lt;/li&gt;&#xA;&lt;li&gt;Restart&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I want to say I tried the suggestions &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16458/juno-display-scaling-issues&quot;&gt;here&lt;/a&gt; at some point but I can't recall if it worked&lt;/p&gt;&#xA;&#xA;&lt;p&gt;YMMV&lt;/p&gt;&#xA;" OwnerUserId="18302" LastActivityDate="2019-06-05T23:40:48.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19125" PostTypeId="1" CreationDate="2019-06-06T03:01:04.130" Score="0" ViewCount="1975" Body="&lt;p&gt;Last year, I had successfully installed conky and conky-manager in Freya. Now I have migrated to Juno. I am very happy with this new version. But I would like to install also conky and conky-manager. I know it's not easy, but you can, and I have not found complete and effective instructions on the internet.&lt;/p&gt;&#xA;" OwnerUserId="17113" LastEditorUserId="16827" LastEditDate="2019-06-07T11:33:02.267" LastActivityDate="2019-06-24T19:51:41.610" Title="Conky and conky-manager on Juno?" Tags="|release-juno|software-installation|conky|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19127" PostTypeId="1" CreationDate="2019-06-06T10:01:53.953" Score="0" ViewCount="124" Body="&lt;p&gt;Everytime I open the App Center, this message would show up. What should I do to fix it? I'm on Juno, if that helps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: The error details are on Pastebin because StackExchange limits characters to 30000 characters or so. (&lt;a href=&quot;https://pastebin.com/KNBxLt9z&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/KNBxLt9z&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="18305" LastEditorUserId="16827" LastEditDate="2019-06-07T11:28:34.457" LastActivityDate="2019-06-07T11:28:34.457" Title="Can't check updates from App Center" Tags="|release-juno|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19129" PostTypeId="2" ParentId="19127" CreationDate="2019-06-06T12:47:00.930" Score="1" Body="&lt;p&gt;You have 2 issues here.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;1. &lt;code&gt;W: Target Packages * is configured multiple times in /etc/apt/sources.list...&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Since you have issues in sources.list only, fixing this is easy. Follow one of the 3 methods to fix the issue:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Identify and delete duplicate entries:&lt;/strong&gt; In your installation duplicate entries are at line 57, 68, 78, 62, 70, 80, 88, 98, 100 and 102. Run,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i '57d;68d;78d;62d;70d;80d;88d;98d,100d;102d' /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Recreate sources.list:&lt;/strong&gt; Delete old sources.list using &lt;code&gt;sudo rm /etc/apt/sources.list&lt;/code&gt;. To recreate repository information you can either,&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;software-properties-gtk&lt;/code&gt;, select components and save. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;OR&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Since you need to restore default repository information in sources.list, you can do that by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add these lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.ubuntu.com/ubuntu/ bionic main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates main restricted universe multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;Save using &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; followed by &lt;kbd&gt;Y&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Follow &lt;a href=&quot;https://askubuntu.com/a/762815/816190&quot;&gt;David's Script&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;2. &lt;code&gt;E: The repository * does not have a Release file.&lt;/code&gt;&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Most of the repositories here in the error don't know &quot;juno&quot;. You need to fix that. Either remove the repositories using &lt;strong&gt;Other Software&lt;/strong&gt; tab in &lt;code&gt;software-properties-gtk&lt;/code&gt; or if you want to use those PPA replace &quot;juno&quot; with &quot;bionic&quot; since juno is based on Ubuntu Bionic (18.04) and added repositories know what is bionic. To do so, follow either of the two methods.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;GUI method&lt;/strong&gt;: Open &lt;code&gt;software-properties-gtk&lt;/code&gt;, go to &lt;strong&gt;Other Software&lt;/strong&gt; tab and edit the reposiories. Replace juno with bionic.&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;CLI method:&lt;/strong&gt; You can do this using &lt;code&gt;sed&lt;/code&gt;, just run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sed -i 's/juno/bionic/g' /etc/apt/sources.list /etc/apt/sources.list.d/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and you're done.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Once you're done, run &lt;code&gt;sudo apt update&lt;/code&gt; in terminal and try relaunching app center.&lt;/p&gt;&#xA;" OwnerUserId="18278" LastEditorUserId="18278" LastEditDate="2019-06-06T12:52:18.743" LastActivityDate="2019-06-06T12:52:18.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19130" PostTypeId="2" ParentId="16493" CreationDate="2019-06-06T14:28:48.137" Score="3" Body="&lt;p&gt;I know this post is a bit dated, but I experienced this issue today with the latest Elementary OS and an HP Envy 5660 printer.  I tried installing HPLIP but no joy.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What did work, however, was:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install system-config-printer&lt;/code&gt;  (note the 'er' on the end there). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;system-config-printer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It found the correct driver right away and I was off to the races - hopes this helps someone.  =0)&lt;/p&gt;&#xA;" OwnerUserId="18306" LastEditorUserId="16827" LastEditDate="2019-06-07T09:20:47.343" LastActivityDate="2019-06-07T09:20:47.343" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19131" PostTypeId="1" CreationDate="2019-06-06T16:12:48.317" Score="1" ViewCount="166" Body="&lt;p&gt;Good day,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm totally new to Linux, I downloaded and installed elementary OS 5 Juno, after some initial complications due to lack of knowledge for the installation next to windows 10, and all good! It turns out that when starting the OS I can not detect the wifi, how do I activate the wifi? to be able to start with the experience and the installation of updates and applications, I thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="18307" LastEditorUserId="16827" LastEditDate="2019-06-10T16:09:43.423" LastActivityDate="2021-06-29T20:05:20.623" Title="Activation of WIFI in elementay OS 5 Juno" Tags="|release-juno|wifi|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19132" PostTypeId="1" CreationDate="2019-06-06T16:21:47.170" Score="0" ViewCount="109" Body="&lt;p&gt;I have latest version — juno which used to bring frequent notifications for update and used to get updated easily but for the last 3 weeks it has stopped sending notifications and doesn't get updated at all and is showing a cogwheel item in dock as well which doesn't show any description on hovering mouse on. Already tried &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; but doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any idea about fixing this issue?&lt;/p&gt;&#xA;" OwnerUserId="18308" LastEditorUserId="16827" LastEditDate="2019-06-07T11:35:37.083" LastActivityDate="2024-02-15T19:07:50.933" Title="system Update failure" Tags="|updates|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19134" PostTypeId="2" ParentId="19131" CreationDate="2019-06-06T18:05:17.183" Score="1" Body="&lt;p&gt;I am also new but I think I can help you since I had the same problem when I installed elementary for the first time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do not you see the wifi symbol anywhere in the upper right corner of the start bar?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it appears, click on it and you should be able to configure it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it does not appear, it happened exactly like ami: you did not install the wifi component when you installed elementary OS. My solution: I uninstalled it and reinstalled it, this time taking care to select the option &quot;add wifi components&quot; during the setup. Maybe there is a better alternative, but from what I tried this I solved the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="18309" LastEditorUserId="16827" LastEditDate="2019-06-10T16:10:06.157" LastActivityDate="2019-06-10T16:10:06.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19136" PostTypeId="2" ParentId="15215" CreationDate="2019-06-07T02:14:51.043" Score="2" Body="&lt;p&gt;Use the dock!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Minimize and restore windows by clicking on their icons in Plank.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2019-06-07T02:14:51.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19137" PostTypeId="1" CreationDate="2019-06-07T15:15:03.747" Score="0" ViewCount="326" Body="&lt;p&gt;I've been switching distros quite frequently lately... And I'm the most familiar with elementary os and ubuntu.. Now I intalled eos again, and I've turned on dark mode. The thing is that the elementary os dark theme doesn't apply to plank as well, so now I'm stuck with all dark except for plank, which still uses the normal, default white plank theme. Is there any way I could get the plank theme to be dark as well. I found the default thing, however it makes the bar a lot smaller, and it doesn't look that elementary-like. Maybe a theme, Idk... Thanks :)&lt;/p&gt;&#xA;" OwnerUserId="14201" LastActivityDate="2019-06-13T06:19:49.533" Title="Does anyone know a dark elementary os like plank theme?" Tags="|settings|plank|pantheon|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19138" PostTypeId="1" AcceptedAnswerId="19141" CreationDate="2019-06-08T12:10:37.323" Score="1" ViewCount="102" Body="&lt;p&gt;I have a workspace layout, where several apps are opened in different workspaces in a full-screen mode. I got used to this layout and remember corresponding numbers, so it is very fast to switch between full-screen apps just by pressing Win+num.&#xA;However, if I close an app in any workspace and it becomes empty, all other apps opened in other following workspaces shift left to that available workspace and their corresponding workspace numbers change as well. This is very annoying. Is there a way to stick an app to a specific workspace, so if a workspace becomes empty it remains empty?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: On macOS one can assign a specific workspace to an app, so then you run it - it is opened in that workspace automatically and stays there, which is a bliss to implement in eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="18317" LastEditorUserId="18317" LastEditDate="2019-06-08T13:49:42.557" LastActivityDate="2019-06-08T13:49:42.557" Title="Is there a way for an application to remain on a specific workspace?" Tags="|applications|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19139" PostTypeId="1" CreationDate="2019-06-08T12:51:42.097" Score="0" ViewCount="177" Body="&lt;p&gt;An editor (notepadqq) is opened in a full screen mode. I need a calculator app (SpeedCrunch) to be always visible on top of the editor in the same workspace. When I set the calc to be 'always on top' via its title bar menu - it disappears anyway when I focus on the editor window. Is there a way to resolve that? Thanks a lot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And one more thing - the title bar menu always pops up upon a right click on a freshly opened window's title bar, but if I tick 'always on top' and want to open title bar menu again - it doesn't pop up anymore upon the first click. It needs 20-30 clicks on a title bar and then, sometimes, it pops up again...&lt;/p&gt;&#xA;" OwnerUserId="18317" LastActivityDate="2024-02-29T10:01:10.183" Title="Always on top of a full-screen app?" Tags="|menu|title-bar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19141" PostTypeId="2" ParentId="19138" CreationDate="2019-06-08T13:43:31.003" Score="1" Body="&lt;p&gt;I just found a solution - Dynamic Workspaces must be disabled in GNOME settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now the empty workspace is not removed from a workspace chain.&lt;/p&gt;&#xA;" OwnerUserId="18317" LastActivityDate="2019-06-08T13:43:31.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19142" PostTypeId="1" AcceptedAnswerId="19143" CreationDate="2019-06-08T14:25:06.003" Score="0" ViewCount="91" Body="&lt;p&gt;How to change the Previous shortcut (default alt+&amp;lt;-) to backspace key? I don't find this on system configuration.&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2019-06-08T19:02:12.617" Title="Previous Files shortcut" Tags="|pantheon-files|keyboard-shortcuts|app-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19143" PostTypeId="2" ParentId="19142" CreationDate="2019-06-08T17:30:18.033" Score="0" Body="&lt;p&gt;It is not elementaryos policy to allow users to change existing native app shortcuts, generally.  The only configurable shortcuts are in the System Settings keyboard plug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This issue has been raised several times in the Files issue tracker (see &lt;a href=&quot;https://github.com/elementary/files/issues?q=is%3Aissue+backspace+is%3Aclosed&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues?q=is%3Aissue+backspace+is%3Aclosed&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reply of the project leader was &quot;We don’t use backspace as a navigation key. Major browsers have dropped this convention. Closing as “Design Conflict”&quot;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-06-08T17:30:18.033" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19145" PostTypeId="2" ParentId="19137" CreationDate="2019-06-09T11:03:34.050" Score="0" Body="&lt;p&gt;The default plank is small but it is dark, Dont know if this helps.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-06-09T11:03:34.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19146" PostTypeId="1" CreationDate="2019-06-09T17:15:43.170" Score="0" ViewCount="129" Body="&lt;p&gt;I'd like to change the window action icons (close, resize, minimize) to custom colored ones, but even when putting colored ones in usr/share/icons/action/symbolic, the system converts them into shades of gray, in both black and white theme.&lt;br&gt;&#xA;Is there a way to force the system to keep these icons in color ?&lt;br&gt;&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="18324" LastActivityDate="2024-02-27T20:07:06.043" Title="Colored close/minimize/resize window icons" Tags="|icons|minimize|color|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19147" PostTypeId="1" CreationDate="2019-06-10T00:11:54.687" Score="0" ViewCount="513" Body="&lt;p&gt;I've seen a few older posts regarding this with nothing concrete, so I thought I'd ask.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm considering a Ryzen 5 2600 CPU (with the Asus Prime A32OM-K motherboard) and I noticed people have said you want kernel 4.17 to ensure your Linux OS is stable with a Ryzen CPU.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed Elementary OS Loki is based on Ubuntu 18.04 LTS, which apparently is kernel 4.15.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone tried a Ryzen CPU with Elementary OS recently&gt;  If there are issues, is it recommended to upgrade the kernel myself?&lt;/p&gt;&#xA;" OwnerUserId="18327" LastActivityDate="2024-03-10T16:04:50.557" Title="Any confirmation on a Ryzen 5 2400 with Elementary OS?" Tags="|kernel|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19151" PostTypeId="2" ParentId="19132" CreationDate="2019-06-10T17:02:29.367" Score="0" Body="&lt;p&gt;So i worked it out by using following commands;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so thanks for your help, probably it was broken repository which was cause of trouble&lt;/p&gt;&#xA;" OwnerUserId="18308" LastEditorUserId="16827" LastEditDate="2019-06-11T12:30:38.737" LastActivityDate="2019-06-11T12:30:38.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19153" PostTypeId="2" ParentId="19131" CreationDate="2019-06-10T18:51:35.597" Score="1" Body="&lt;p&gt;@David, here's another trick. Try to connect to the internet via Ethernet cable first (if you happen to have one). After successful connection the Wireless networks list will appear in Network panel. After that you'll be able to select your WiFi network and ditch the Ethernet.&#xA;Worked for me during the initial elementary OS install. (Twice.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-10T18:51:35.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19155" PostTypeId="1" CreationDate="2019-06-10T23:57:19.140" Score="0" ViewCount="340" Body="&lt;p&gt;Elementary OS seems to support almost everything on the Asus TP200S out of the box, but one issue is screen auto-rotation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS recognises that the screen should be rotated when flipping the computer into tablet mode and back, but by default the screen is rotated sideways 180 degrees when in laptop mode. In tablet mode, the screen flips to landscape, horizontal mode (what I want in laptop mode).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changing the GUI settings allows me to change the rotation manually. However, if I put the screen into horizontal/landscape mode, it will not switch to vertical mode when I flip it into tablet mode, even though I have rotation lock off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, the GUI settings never persist in the lockscreen. No configuration of the GUI rotation settings shows up in the lockscreen and it's always rotated 180 degrees in laptop mode (but it will flip into landscape/horizontal mode when I put it into tablet mode in the lockscreen).&lt;/p&gt;&#xA;" OwnerUserId="18333" LastEditorUserId="18278" LastEditDate="2019-06-12T19:47:27.950" LastActivityDate="2020-03-29T04:42:54.863" Title="Backward Rotation Settings for Tablet Mode of Asus TP200S" Tags="|display|asus|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19157" PostTypeId="2" ParentId="9146" CreationDate="2019-06-11T09:32:35.493" Score="1" Body="&lt;p&gt;I did exactly the same thing and panicked after elementray os booted into a command line, after trying a lot of solutions this worked out for me:&#xA;login as administrator by typing your username and then your password and then type the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge elementary-desktop&#xA;sudo apt install elementary-desktop&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18338" LastEditorUserId="18278" LastEditDate="2019-06-12T19:46:56.920" LastActivityDate="2019-06-12T19:46:56.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19158" PostTypeId="2" ParentId="19155" CreationDate="2019-06-12T05:57:41.623" Score="1" Body="&lt;p&gt;&lt;strong&gt;Solution&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was an issue with iio-sensor-proxy. Running &quot;monitor-sensor&quot; in terminal showed an incorrect orientation, so I knew the problem was with iio-sensor-proxy and not with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sudo all steps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Navigate to /lib/udev/hwdb.d and open 60-sensor.hwdb with a text editor. Scroll down to where you start seeing entries that look like the following&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sensor:modalias:acpi:INVN6500*:dmi:svnASUSTeK:pnT100CHI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ACCEL_MOUNT_MATRIX=-1, 0, 0; 0, 1, 0; 0, 0, 1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy the entry that most closely resembles your make and model of computer, and paste it into a new file in the same folder (/lib/udev/hwdb.d/) called 61-sensor-local.hwdb.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Replace the model and manufacturer with your model and manufacturer, and change the values in ACCEL_MOUNT_MATRIX. Each axis, x-y-z, separated by a semicolon, can only have one non-zero number and it must be 1 or -1. Experiment with different values until you find what works. It's a pain because you have to reboot each time. Use the following two links as guides.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/410826/change-iio-sensors-data-via-custom-accel-mount-matrix&quot;&gt;https://unix.stackexchange.com/questions/410826/change-iio-sensors-data-via-custom-accel-mount-matrix&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.aixin.fr/jipeblog/?p=119&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.aixin.fr/jipeblog/?p=119&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note, I said copy and paste the entry from 60-sensors.hwdb and replace the names instead of writing it from scratch because if you follow verbatim the instructions in the two links, you'll notice the asterisks are in different spots. It didn't work for me unless I mimicked exactly what was already in the config file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Make sure you update your system using the commands in the aixin.fr&#xA;   link.&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="18333" LastActivityDate="2019-06-12T05:57:41.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19162" PostTypeId="1" CreationDate="2019-06-12T16:46:37.360" Score="0" ViewCount="697" Body="&lt;p&gt;I've been trying to enable desktop icons on pantheon, however the desktop configurations on my pantheon don't appear to be working right. Any idea how i can fix this issue?&lt;/p&gt;&#xA;" OwnerUserId="18350" LastActivityDate="2024-02-08T10:06:25.753" Title="Can't find org&gt;pantheon&gt;desktop&gt;cerbere on dconf" Tags="|desktop|pantheon|icons|ubuntu|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19163" PostTypeId="2" ParentId="19162" CreationDate="2019-06-12T18:04:49.407" Score="0" Body="&lt;p&gt;as far as I know there is no easy way to enable desktop icons. I recommend do use &quot;Desktop Folder&quot; (&lt;a href=&quot;https://appcenter.elementary.io/com.github.spheras.desktopfolder&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.spheras.desktopfolder&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, it seems to be possible to use nautilus to get the icons back on the desktop like described here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3856/how-to-enable-desktop-icons-and-right-click-in-elementary-os-freya&quot;&gt;How to enable desktop icons and right click in Elementary OS Freya?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="18352" LastActivityDate="2019-06-12T18:04:49.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19164" PostTypeId="2" ParentId="19137" CreationDate="2019-06-13T06:19:49.533" Score="1" Body="&lt;p&gt;You can start to create your own plank theme.&#xA;If you just want a dark theme to use right away, look at &lt;a href=&quot;https://github.com/ChildishGiant/elementary-dark-plank&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ChildishGiant/elementary-dark-plank&lt;/a&gt;. It fits very well with the default dark theme on eOS.&lt;/p&gt;&#xA;" OwnerUserId="18355" LastActivityDate="2019-06-13T06:19:49.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19165" PostTypeId="2" ParentId="19118" CreationDate="2019-06-13T09:16:57.650" Score="1" Body="&lt;p&gt;Great to see a fellow Thai in here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now as for the font, I assume you want to change it to Thai serif font. &#xA;Elementary OS come with both san-serif and serif Thai fonts. All you need to do is change the default font from san-serif to serif. And you can do that by copying these font files:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/fonts/truetype/noto/NotoSerifThai-Bold.ttf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/usr/share/fonts/truetype/noto/NotoSerifThai-Regular.ttf&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;to &lt;code&gt;~/.local/share/fonts/&lt;/code&gt; And then refresh font caches with command &lt;code&gt;fc-cache&lt;/code&gt; in the terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;code&gt;fc-list :lang=th&lt;/code&gt; to check if your font is registered.&lt;/p&gt;&#xA;" OwnerUserId="18357" LastEditorUserId="18357" LastEditDate="2019-09-03T18:11:17.430" LastActivityDate="2019-09-03T18:11:17.430" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19168" PostTypeId="1" AcceptedAnswerId="19218" CreationDate="2019-06-13T14:05:37.183" Score="0" ViewCount="1297" Body="&lt;p&gt;So, I'm new on Linux and elementary, I really liked the OS, so far as I can tell, but I'm having a little problem with Komorebi (live wallpapers application), yes, i know this problem occurs because of how Komorebi works, but I expect to have some help :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Komorebi runs in the background and to configure the wallpapers, i have to right-click in my desktop to open it's menu, but, right-click doesn't work on elementary (yes I know that it's because of the design idea of elementary and I'm actually in favor of 'no desktop').. So, is there any way to enable, just temporarily, the right-click, I only need this to configure this application...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance guys!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(sorry for any English issue)&lt;/p&gt;&#xA;" OwnerUserId="18362" LastEditorUserId="18362" LastEditDate="2019-06-13T20:29:38.597" LastActivityDate="2021-03-03T14:32:09.980" Title="Komorebi on Elementary" Tags="|desktop|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19169" PostTypeId="2" ParentId="19147" CreationDate="2019-06-13T14:31:05.810" Score="0" Body="&lt;p&gt;I am running Pantheon Desktop on fedora 30. And it runs really great. My CPU is a AMD Ryzen 5 1600X (6 core). My Current kernel version is 5.1.8-300. I have used for a long time, maybe over 10 years, only ubuntu and manjaro. But Fedora 30 is really surprising me a lot. And I think to switch to fedora. The Pantheon desktop is running faster and smoother as like in Elementary OS 5.0. The Pantheon desktop is still not completely integrated, but for my requirements it's good enough.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Back to your question&#xA;My AMD Ryzen 5 1600X CPU is absolutely Elementary OS 5.0 an Fedora 30 (GNOME + Pantheon) compatible. Why should the a bigger CPU from AMD not be compatible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers Chris&lt;/p&gt;&#xA;" OwnerUserId="18363" LastEditorUserId="18363" LastEditDate="2019-06-13T14:36:55.143" LastActivityDate="2019-06-13T14:36:55.143" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19171" PostTypeId="2" ParentId="2059" CreationDate="2019-06-14T00:23:59.460" Score="5" Body="&lt;p&gt;For Elementary OS 5.x Juno, it has been set to a new location:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings natural-copy-paste false&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8082" LastActivityDate="2019-06-14T00:23:59.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19172" PostTypeId="2" ParentId="11792" CreationDate="2019-06-14T00:29:30.353" Score="0" Body="&lt;p&gt;For Elementary OS 5.x Juno, it has been set to a new location:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings natural-copy-paste false&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8082" LastActivityDate="2019-06-14T00:29:30.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19173" PostTypeId="2" ParentId="18844" CreationDate="2019-06-14T01:15:47.753" Score="1" Body="&lt;p&gt;Based on &lt;a href=&quot;https://unix.stackexchange.com/questions/47749/cannot-add-new-mode-in-xrandr-for-external-monitor/&quot;&gt;answer&lt;/a&gt;&#xA; you can use &lt;code&gt;gtf height width refresh_rate&lt;/code&gt; and get an new modeline as response and then you can create new mode with the output of the first command &lt;code&gt;xrandr --newmode modeline&lt;/code&gt;, after that you need to ensure in which output you want to set up the modeline, you can check this with &lt;code&gt;xrandr -q&lt;/code&gt; after get the response add the newmode to the desired output &lt;code&gt;xrandr --addmode OUTPUT &quot;MODELINE&quot;&lt;/code&gt; and apply the new modeline &lt;code&gt;xrandr --output OUTPUT  --mode MODELINE&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="5905" LastActivityDate="2019-06-14T01:15:47.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19175" PostTypeId="1" CreationDate="2019-06-14T19:41:17.810" Score="0" ViewCount="99" Body="&lt;p&gt;I have a laptop that only has a 32gb ssd. I have a 128gb microsd installed for extra storage. I'd like to have my os installed on the ssd, but my home folder and personal files stored on the microsd card. How do I go about doing so? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="18367" LastActivityDate="2024-02-23T07:01:45.260" Title="How do I install with home folder on microsd card?" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19179" PostTypeId="1" CreationDate="2019-06-15T10:15:24.523" Score="0" ViewCount="78" Body="&lt;p&gt;After full-screen slack and roll up or close, last screen slack freeze on backgrond, but this is not freeze system work.&lt;/p&gt;&#xA;" OwnerUserId="18246" LastActivityDate="2024-02-25T23:05:00.610" Title="Background, not update wallpaper and freezes" Tags="|release-juno|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19180" PostTypeId="2" ParentId="8095" CreationDate="2019-06-15T20:03:02.897" Score="0" Body="&lt;p&gt;A &lt;a href=&quot;https://entornosgnulinux.com/2018/01/01/autohide-en-wingpanel-para-elementary-os-loki/&quot; rel=&quot;nofollow noreferrer&quot;&gt;blog post&lt;/a&gt; gives perfect steps to do it in the current elementary OS 5.0 Juno. The post is in Spanish but it's easy to follow for a moderate linux user.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt update&#xA;sudo apt install elementary-wingautohide &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18376" LastEditorUserId="7061" LastEditDate="2020-04-09T23:25:05.613" LastActivityDate="2020-04-09T23:25:05.613" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19181" PostTypeId="1" AcceptedAnswerId="19183" CreationDate="2019-06-15T21:51:16.567" Score="0" ViewCount="52" Body="&lt;p&gt;Beginning early this past week sometime I noticed the right-click context menu in Firefox opens with the mouse pointer right in the middle of it. As a result it usually selects &quot;Inspect Element&quot; immediately, when what I want is to select &quot;Search Yahoo for 'selected word'&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This doesn't happen when using Chromium or Chrome on the same computer and same user. I reset Firefox, but that didn't fix it. I removed Firefox and and the .mozilla folder from my home directory, then reinstalled Firefox and tested before syncing with my Firefox account. It still behaved the same way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a new user in the OS and tested with the same results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="18377" LastActivityDate="2019-06-16T03:42:01.373" Title="Context menu opens with the mouse pointer in the middle of it" Tags="|firefox|context-menu|" AnswerCount="1" CommentCount="0" ClosedDate="2019-06-17T11:20:32.160" ContentLicense="CC BY-SA 4.0" />
  <row Id="19182" PostTypeId="1" CreationDate="2019-06-16T02:48:24.723" Score="0" ViewCount="384" Body="&lt;p&gt;can anyone help to fix my hdd. All the access is read-only after I reboot my laptop. I already tried to change the ownership and owner but still, I cannot save anything because all my files are read-only. I checked the fstab not much help&lt;/p&gt;&#xA;" OwnerUserId="18380" LastEditorUserId="16827" LastEditDate="2019-06-17T11:24:36.310" LastActivityDate="2019-06-17T11:24:36.310" Title="All my files under my HDD is read-only" Tags="|permissions|hdd|storage|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19183" PostTypeId="2" ParentId="19181" CreationDate="2019-06-16T03:42:01.373" Score="0" Body="&lt;p&gt;This fixed the unintended selecting for me, but not the menu placement &lt;a href=&quot;https://elementaryos.stackexchange.com/a/17297/18379&quot;&gt;https://elementaryos.stackexchange.com/a/17297/18379&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerDisplayName="user18379" LastActivityDate="2019-06-16T03:42:01.373" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19187" PostTypeId="1" CreationDate="2019-06-17T21:33:18.833" Score="1" ViewCount="43" Body="&lt;p&gt;I would like to not have to type the password every time I start google chrome in the system.&#xA;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="18395" LastActivityDate="2019-06-17T21:33:18.833" Title="How to remove the password request from the key deposit" Tags="|google-chrome|security|user|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19188" PostTypeId="1" CreationDate="2019-06-18T00:18:04.610" Score="1" ViewCount="98" Body="&lt;p&gt;everyone in the elementary Os world,&#xA;I must say Having come from an Apple background I am liking what I see so far. I am running elementary OS 5.0 Juno 64 bit&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 1 &#xA;I notice there is no Minimise / maximise buttons on applications, I have to right click.  Can this be overcome? Are there shortcut keyboard strokes for it perhaps??&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 2 &#xA;I have a HP desk jet printer 2600 series and I Can NOT get it to work wireless.  It connects to my WiFi but in doing so kicks me out&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 3&#xA;My mouse scrolls the wrong way, IE when I scroll the wheel towards me the text goes up,not down.  I am unable to find any settings that relate to that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope someone can help me out&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TIA&#xA;Ozzyrod&lt;/p&gt;&#xA;" OwnerUserId="18391" LastActivityDate="2019-06-21T10:59:02.823" Title="Hardware Printer, Mouse" Tags="|settings|mouse|printer|" AnswerCount="3" CommentCount="0" ClosedDate="2019-06-24T19:57:27.253" ContentLicense="CC BY-SA 4.0" />
  <row Id="19189" PostTypeId="2" ParentId="19125" CreationDate="2019-06-18T00:22:28.763" Score="1" Body="&lt;p&gt;First of all download files from following links:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://launchpadlibrarian.net/340091846/realpath_8.26-3ubuntu4_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;Realpath_8.26&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/teejee2008/conky-manager/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;Newer release version&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;And then go to your download directory use following commands in your terminal:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install conky&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo dpkg -i realpath_8.26-3ubuntu4_all.deb conky-manager-v2.4-amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt -f install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Enjoy!&lt;/p&gt;&#xA;" OwnerUserId="18396" LastEditorUserId="16827" LastEditDate="2019-06-24T19:51:41.610" LastActivityDate="2019-06-24T19:51:41.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19190" PostTypeId="2" ParentId="19188" CreationDate="2019-06-18T06:40:11.227" Score="0" Body="&lt;p&gt;Question 1: The minimise / maximise button is on the right (by default)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0YOY3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0YOY3.png&quot; alt=&quot;minimise-maximise&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have elementary tweaks installed you can customize the layout style.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tbdCZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tbdCZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example OSX:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/y4XIc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/y4XIc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Windows:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jyROt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jyROt.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Question 3: System settings -&gt; Mouse &amp;amp; Touchpad -&gt; Mouse -&gt; Natural scrolling&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am afraid I can not help you with question 2.&lt;/p&gt;&#xA;" OwnerUserId="18297" LastActivityDate="2019-06-18T06:40:11.227" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19191" PostTypeId="1" CreationDate="2019-06-18T08:20:24.450" Score="0" ViewCount="63" Body="&lt;p&gt;I click the download button, then i can see the page with message like this &quot;Unable to access the site. Connection reset&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;No matter if i'm trying on the different computers or the different browsers (Chrome, Firefox, Safari). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the same time i can load other Linux systems, for example Manjaro or Endless OS. This problem only with eOS ;( What can i do? Thx for attention. &lt;/p&gt;&#xA;" OwnerUserId="18399" LastActivityDate="2019-06-22T10:59:34.950" Title="i can't load eOS from official website" Tags="|download|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19192" PostTypeId="1" CreationDate="2019-06-18T12:09:46.007" Score="1" ViewCount="329" Body="&lt;p&gt;so I recently bought the notebook and I am currently dual-booting Windows 10 and ElementaryOS 5.0. The system runs flawlessly except for when I boot into elementaryOS my speakers make a loud pop-noise and my screen has a visual interference (like a colorful TV-noise image) in the top third of the screen.&#xA;Is there anything I can do about it? &lt;/p&gt;&#xA;" OwnerUserId="18401" LastActivityDate="2024-01-09T00:06:00.707" Title="Speakers make a pop sound on boot [Huawei MateBook D 14 Ryzen EU-Version]" Tags="|boot|dual-boot|sound|music|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19193" PostTypeId="2" ParentId="19175" CreationDate="2019-06-18T21:02:18.043" Score="0" Body="&lt;p&gt;I recently did this with a symbolic link.  I didnt get rid of my ~/ or Home folder but rather mapped paths on a micro-sd card under ~/.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/56339/how-to-create-a-soft-or-symbolic-link&quot;&gt;Here's an answer that explains it&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In my case I had an micro-sd called &quot;Extra&quot;, with a folder called &quot;Repositories&quot;. So my command was&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s /media/{myprofilename}/Extra/Repositories ~/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I can access that folder from &lt;code&gt;~/Repositories&lt;/code&gt; as if it were in the &lt;code&gt;HOME&lt;/code&gt; folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're going to user the terminal a lot, I would also set this up for bash aliases as well so if your OS gets wiped away, you can just re-apply your links and life goes on.&lt;/p&gt;&#xA;" OwnerUserId="18302" LastActivityDate="2019-06-18T21:02:18.043" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19194" PostTypeId="2" ParentId="17989" CreationDate="2019-06-18T22:36:34.433" Score="0" Body="&lt;p&gt;I have this same issue with an HP ENVY 5000 series. It did start working temporarily and I managed to delete the printers marked disabled, but as soon as I ran system-config-printer to rename the Printer description, the disabled one returned. Incidentally you can add the printer using the CUPS web administration &lt;a href=&quot;http://localhost:631/admin&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631/admin&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oddly I have 2 machines displaying this and they both appeared correctly after installing Thunderbird and Wordpress client, but both have since returned with a Printer listed as disabled. For me it is now just a cosmetic thing in the printer settings&lt;/p&gt;&#xA;" OwnerUserId="18405" LastActivityDate="2019-06-18T22:36:34.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19195" PostTypeId="1" AcceptedAnswerId="19250" CreationDate="2019-06-19T08:42:57.730" Score="0" ViewCount="85" Body="&lt;p&gt;elementary friends ! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed PCManFM and added a keyboard shortcut (Special + E) to launch it, in system settings-&gt;keyboard-&gt;shortcuts-&gt;custom&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Most of the time, if I have the focus on some program window,&#xA;the file explorer will launch in the background. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would want it to come upfront.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I set the shortcut with a simple command 'pcmanfm'.&#xA;Would you know if I could use a command that forces it to start in the foreground ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2019-06-24T22:23:25.493" Title="Force file explorer to open in foreground with keyboard shortcut" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19196" PostTypeId="2" ParentId="17925" CreationDate="2019-06-19T12:42:24.517" Score="0" Body="&lt;p&gt;This was an issue in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12733/elementary-os-will-not-load-at/12737#12737&quot;&gt;Loki&lt;/a&gt;. It's an issue related to the at-spi dbus. I have not experienced it in Juno, but what I would recommend is executing the following line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have a long list of &quot;fixes/workaround&quot; that could be applicable for many issues within elementary, affectionately known as eLC or the elementary OS Combobulator. Unfortunately I have not had a chance to test them all in Juno. But they might come in useful for you and others. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/PretzelJones/05ff9ae2af0570b86aaebc385c341428&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/PretzelJones/05ff9ae2af0570b86aaebc385c341428&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7492" LastActivityDate="2019-06-19T12:42:24.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19198" PostTypeId="2" ParentId="1149" CreationDate="2019-06-19T17:23:40.273" Score="7" Body="&lt;p&gt;For versions 5.0 above:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set io.elementary.terminal.settings font 'FiraCode 10'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18412" LastActivityDate="2019-06-19T17:23:40.273" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19200" PostTypeId="2" ParentId="19088" CreationDate="2019-06-19T19:07:06.553" Score="0" Body="&lt;p&gt;I decided that it was simpler to reset than continue trying to find a solution. Luckily, I was able to back up my files beforehand.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mods, feel free to lock this thread if necessary.&lt;/p&gt;&#xA;" OwnerUserId="18316" LastActivityDate="2019-06-19T19:07:06.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19202" PostTypeId="1" CreationDate="2019-06-19T21:36:24.287" Score="3" ViewCount="639" Body="&lt;p&gt;I have used snap package manager to install several applications on elementary OS. But when I want to start any app it may take a long time (up to several minutes). Sometimes app does not start and I need to click on app icon and wait again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no same problem with default elementary OS AppCenter. These apps open quickly enough.&lt;/p&gt;&#xA;" OwnerUserId="18301" LastEditorUserId="308" LastEditDate="2019-12-19T20:09:09.943" LastActivityDate="2019-12-19T20:11:59.890" Title="Snap applications start extremely slowly" Tags="|applications|apps|camera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19203" PostTypeId="1" CreationDate="2019-06-20T04:02:11.643" Score="2" ViewCount="72" Body="&lt;p&gt;Im not able save photos emailed to me. If I right click the photo the only option is to &quot;select all&quot;. If I select all and right click to try to paste into the Pictures file there is no option to paste. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I try to drag and drop to the Pictures folder I get &quot;Error while copying&quot; and &quot;The specified location is not supported&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="18418" LastActivityDate="2019-10-06T12:02:05.260" Title="Can't save photos from email" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="2" ClosedDate="2019-10-07T07:31:05.680" ContentLicense="CC BY-SA 4.0" />
  <row Id="19204" PostTypeId="1" AcceptedAnswerId="19206" CreationDate="2019-06-20T04:32:47.080" Score="1" ViewCount="114" Body="&lt;p&gt;Here is some information:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lspci log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 08)&#xA;00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (rev 07)&#xA;00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)&#xA;00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)&#xA;00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)&#xA;00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)&#xA;00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)&#xA;00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)&#xA;00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)&#xA;00:1c.6 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #7 (rev f1)&#xA;00:1f.0 ISA bridge: Intel Corporation Intel(R) 100 Series Chipset Family LPC Controller/eSPI Controller - 9D4E (rev 21)&#xA;00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)&#xA;00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)&#xA;00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)&#xA;01:00.0 3D controller: NVIDIA Corporation GP108M [GeForce MX150] (rev a1)&#xA;02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter&#xA;03:00.0 Non-Volatile memory controller: Sandisk Corp Device 5005 (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;rfkill list all:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: ideapad_wlan: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;1: ideapad_bluetooth: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&#xA;2: hci0: Bluetooth&#xA;    Soft blocked: yes&#xA;    Hard blocked: no&#xA;3: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lshw -class network&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network                 &#xA;       description: Wireless interface&#xA;       product: RTL8822BE 802.11a/b/g/n/ac WiFi adapter&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wlp2s0&#xA;       version: 00&#xA;       serial: 80:2b:f9:b5:bd:63&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=r8822be driverversion=4.15.0-52-generic firmware=N/A ip=192.168.43.174 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:137 ioport:3000(size=256) memory:a4100000-a410ffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       physical id: 3&#xA;       logical name: enp0s20f0u3&#xA;       serial: 62:a0:67:1e:24:c7&#xA;       capabilities: ethernet physical&#xA;       configuration: broadcast=yes driver=rndis_host driverversion=22-Aug-2005 firmware=RNDIS device ip=192.168.42.44 link=yes multicast=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The laptop is Lenovo Ideapad 530s. It was preinstalled with Windows 10. I've dual booted it with Elementary OS Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secure boot is disabled. I've searched and tried lots of options that were present in various forums in vain. If there is any more information required, please ask.&lt;/p&gt;&#xA;" OwnerUserId="18419" LastEditorUserId="18419" LastEditDate="2019-06-20T04:49:43.763" LastActivityDate="2019-06-20T07:20:19.723" Title="Wifi always disabled in Elementary Juno" Tags="|release-juno|wifi|dual-boot|drivers|" AnswerCount="1" CommentCount="0" ClosedDate="2019-06-24T19:54:04.123" ContentLicense="CC BY-SA 4.0" />
  <row Id="19205" PostTypeId="2" ParentId="19188" CreationDate="2019-06-20T04:50:40.430" Score="0" Body="&lt;p&gt;In relation to the minimize/maximize it is the double arrow icon on the right top. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I think you want is for the window to minimize all the way to the the dock not just resize to a smaller window. For that you do have to either right click or click on the apps icon in the dock. &lt;/p&gt;&#xA;" OwnerUserId="18418" LastActivityDate="2019-06-20T04:50:40.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19206" PostTypeId="2" ParentId="19204" CreationDate="2019-06-20T07:20:19.723" Score="0" Body="&lt;p&gt;I just updated the AppCenter and was frustated that this question wasn't getting enough attention and when I restarted my laptop and somehow it got working on its own.&lt;/p&gt;&#xA;" OwnerUserId="18419" LastActivityDate="2019-06-20T07:20:19.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19208" PostTypeId="2" ParentId="19191" CreationDate="2019-06-20T09:42:38.853" Score="0" Body="&lt;p&gt;I know there was some problems with the download servers some time ago, but i did think they where fixed, I know this is going to sound strange but have you tried turning your computer off and back on again, also turn your router off and back on.&#xA;I had a problem some time age where i could not get onto some web sites and i did a router reset and all worked after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-06-20T09:42:38.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19209" PostTypeId="1" CreationDate="2019-06-20T20:08:55.247" Score="0" ViewCount="120" Body="&lt;p&gt;I have a problem with appcenter show me &lt;/p&gt;&#xA;&#xA;&lt;p&gt;THIS PROBLEM ??&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/birdie-team/daily/ubuntu bionic Release' does not have a Release file.&#xA;&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&#xA;E: The repository 'http://ppa.launchpad.net/birdie-team/stable/ubuntu bionic Release' does not have a Release file.&#xA;&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&#xA;**  I can't update any apps :(&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18423" LastEditorUserId="16827" LastEditDate="2019-06-24T19:55:15.440" LastActivityDate="2019-06-24T19:55:15.440" Title="AppCenter - Failed to Fetch updates?" Tags="|release-juno|updates|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19210" PostTypeId="1" CreationDate="2019-06-20T23:05:07.057" Score="1" ViewCount="64" Body="&lt;p&gt;I'm using &lt;code&gt;ctrl + space&lt;/code&gt; as a custom shortcut to activate a TTS (text to speech) script that I wrote.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've been using this shortcut for about a week now with no problems, but recently the shortcut won't activate the script the first time I press it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to hit &lt;code&gt;ctrl(hold) -&amp;gt; space(tap) -&amp;gt; space(tap)&lt;/code&gt;, so I essentially have to activate it twice.  I checked the script itself by just running it in the terminal and it's behaving as expected.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to get back to the old behavior of activating it only once.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any insights would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="18381" LastActivityDate="2019-06-20T23:22:05.107" Title="Custom keyboard shortcut now activating after second press" Tags="|release-juno|settings|keyboard-shortcuts|bash|accessibility|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19211" PostTypeId="2" ParentId="19210" CreationDate="2019-06-20T23:22:05.107" Score="1" Body="&lt;p&gt;I answered this immediately after posting this and in so doing found a potential bug. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I went to delete the shortcut and reestablish it from scratch.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When I went to copy the path to the script I noticed that when I pressed &lt;code&gt;ctrl&lt;/code&gt; for the copy shortcut (&lt;code&gt;ctrl + c&lt;/code&gt;), the selected text was being deselected.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I realized that the problem was with the &lt;code&gt;ctrl&lt;/code&gt; key-press itself and the only thing that changed relative to that was that I enabled the &lt;code&gt;Reveal pointer&lt;/code&gt; option (&lt;code&gt;System Settings -&amp;gt; Mouse &amp;amp; Touchpad, General(tab): Reveal pointer&lt;/code&gt;).  This option listens for a press of the &lt;code&gt;ctrl&lt;/code&gt; key and plays an animation around the cursor to reveal it's location.  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When I disabled &lt;code&gt;Reveal pointer&lt;/code&gt; all behavior relating to the &lt;code&gt;ctrl&lt;/code&gt; key returned to normal.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Bug description:  Reveal pointer option (&lt;code&gt;System Settings -&amp;gt; Mouse &amp;amp; Touchpad, General(tab): Reveal pointer&lt;/code&gt;) interferes with normal use of the &lt;code&gt;ctrl&lt;/code&gt; key.&lt;br&gt;&#xA;Example: text is deselected when trying to copy using &lt;code&gt;ctrl + c&lt;/code&gt;.&#xA;Other short cuts break as well.&lt;/p&gt;&#xA;" OwnerUserId="18381" LastActivityDate="2019-06-20T23:22:05.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19213" PostTypeId="2" ParentId="19188" CreationDate="2019-06-21T10:59:02.823" Score="0" Body="&lt;p&gt;To install elementary tweaks follow the following&#xA;sudo apt-get install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp; sudo apt-get update&#xA;sudo apt-get install elementary-tweaks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tweaks will be installed into the system setting folder&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-06-21T10:59:02.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19214" PostTypeId="2" ParentId="19179" CreationDate="2019-06-21T11:08:55.597" Score="0" Body="&lt;p&gt;Is it possible that you are talking about wallpaper bug on gala?&#xA;Link: &lt;a href=&quot;https://github.com/elementary/gala/issues/13&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/13&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18424" LastActivityDate="2019-06-21T11:08:55.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19215" PostTypeId="2" ParentId="19060" CreationDate="2019-06-21T11:10:27.183" Score="0" Body="&lt;p&gt;If you click on the (Source) it takes you to the page that go though the steps in setting up wireguard.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-06-21T11:10:27.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19216" PostTypeId="1" CreationDate="2019-06-21T16:47:57.597" Score="1" ViewCount="47" Body="&lt;p&gt;With Ubuntu stating they will be removing 32-bit package support, I would assume Elementary OS will follow the same path eventually since the repositories are based on that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was considering promoting Elementary OS for some clients who currently use Windows, but would like to use something else. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My experience with Elementary indicates this would be a great way to get them off Windows. However, due to the lack of future support for 32-bit libraries and the likely need for Wine of some sort, I can no longer recommend any Ubuntu based distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any plan on the Elementary OS side to support 32-bit packages after Ubuntu 19 ceases support? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've heard that Ubuntu plans to continue support for Wine in a snap, based on Ubuntu 18. This is a non-starter from my perspective.&lt;/p&gt;&#xA;" OwnerUserId="18426" LastActivityDate="2019-06-21T16:47:57.597" Title="32-bit future as this is based on Ubuntu" Tags="|wine|32-bit|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19217" PostTypeId="1" CreationDate="2019-06-21T17:12:50.357" Score="1" ViewCount="82" Body="&lt;p&gt;Good afternoon,&#xA;I am a developer and i would like to know if I have the right to creat a distribution base on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cordially, rivens&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ps: sorry for my bad English it's because i'm french&lt;/p&gt;&#xA;" OwnerUserId="18427" LastEditorUserId="16827" LastEditDate="2019-06-24T20:01:37.590" LastActivityDate="2019-06-24T20:01:37.590" Title="Can I create a Linux distribution based on elementary OS?" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19218" PostTypeId="2" ParentId="19168" CreationDate="2019-06-21T18:03:13.903" Score="0" Body="&lt;p&gt;Possible solution (have not tried it myself):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install Desktop Folder (AppCenter &gt; Search and install &quot;Desktop Folder&quot;).&lt;/li&gt;&#xA;&lt;li&gt;Right-click on your amazingly revived Desktop and get access to Komorebi.&lt;/li&gt;&#xA;&lt;li&gt;If you do not need the Desktop Folder, you can uninstall it or just Hide it via Right-click menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-21T18:03:13.903" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19219" PostTypeId="1" AcceptedAnswerId="19237" CreationDate="2019-06-22T03:59:33.330" Score="0" ViewCount="2113" Body="&lt;p&gt;So, I am trying to configure my nvidia driver, installed via AppCenter, and it's not been listed in Nvidia X Server Settings as you can see here: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RgQHk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RgQHk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And i'm getting this error when I launch it by the console:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IfdWZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IfdWZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already did some search and tried to reinstall the driver from ppa, from .run downloaded from nvidia website and from cli 'sudo ubuntu-drivers autoinstall', but all i get is the same case. I even reinstalled the elementary itself, but nothing changes, can someone please help me? If there's any issue in my request, please tell me so I can clarify myself, thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I thought it might help if I said what I'm trying to do here..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm looking to play CS:GO, and I just moved to Linux, on Windows, I got about 80 fps with everything in medium/high, and on Linux, I got about 40 fps with every video option in very low/low, i think it's because the GPU was in 'performance mode' on windows, set by nvidia control panel, and by what I've found on foruns, the nvidia x server settings is suppose to allow me to do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if that info is usefull, but it's better than none information hehehe.&lt;/p&gt;&#xA;" OwnerUserId="18362" LastEditorUserId="-1" LastEditDate="2019-06-25T12:06:37.087" LastActivityDate="2019-07-27T07:18:43.060" Title="GPU not detected" Tags="|release-juno|graphic-drivers|drivers|nvidia|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19220" PostTypeId="2" ParentId="19209" CreationDate="2019-06-22T07:28:14.833" Score="1" Body="&lt;p&gt;You must have previously added the PPA for 'Birdie' app to your system's repositories list. But as Birdie has gotten quite old and apparently hasn't been  released for Ubuntu 18.04 (bionic), your system can't find the proper 'bionic' release file in that particular PPA, displays an error message and can't proceed with other updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix the AppCenter update process, you could remove Birdie PPA from your system's PPA list. You can read how to do it &lt;a href=&quot;https://askubuntu.com/questions/307/how-can-ppas-be-removed&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-22T07:28:14.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19221" PostTypeId="2" ParentId="19191" CreationDate="2019-06-22T10:52:05.937" Score="1" Body="&lt;p&gt;Do you use any kind of adblocker, NoScript, etc? The Purchase/Download button seems to have something to do with Stripe.com (online payment service). So I guess, you have to let it execute its scripts to download the iso.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the official magnet link to official elementary .iso. (You can also donate &quot;what you want&quot; amount to the devs, of course.)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;magnet:?xt=urn:btih:f5b31b1bd67bf65fe97be298ec7c473cb2e3e201&amp;amp;dn=elementaryos-5.0-stable.20181016.iso&amp;amp;tr=https%3A%2F%2Fashrise.com%3A443%2Fphoenix%2Fannounce&amp;amp;tr=udp%3A%2F%2Fopen.demonii.com%3A1337%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&amp;amp;tr=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&amp;amp;ws=http://ams3.dl.elementary.io/download/MTU2MTE5OTI2Mg==/elementaryos-5.0-stable.20181016.iso&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-06-22T10:59:34.950" LastActivityDate="2019-06-22T10:59:34.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19222" PostTypeId="1" CreationDate="2019-06-22T16:51:46.983" Score="1" ViewCount="164" Body="&lt;p&gt;I cannot seem to find a button or selection in the Code application to print an open document.&lt;/p&gt;&#xA;" OwnerUserId="18432" LastActivityDate="2019-06-23T08:24:44.913" Title="How can I print from within the Code app?" Tags="|code|" AnswerCount="1" CommentCount="0" ClosedDate="2019-06-24T19:49:59.357" ContentLicense="CC BY-SA 4.0" />
  <row Id="19223" PostTypeId="2" ParentId="19014" CreationDate="2019-06-22T18:01:37.813" Score="0" Body="&lt;p&gt;I had this issue with my XPS 13 9730.  It's due to UEFI boot being set in BIOS.  You need to enable Legacy Boot.  I'm trying to work out how to force Elementary OS to install as UEFI because Legacy is much slower.&lt;/p&gt;&#xA;" OwnerUserId="13653" LastActivityDate="2019-06-22T18:01:37.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19224" PostTypeId="2" ParentId="18901" CreationDate="2019-06-22T18:04:45.650" Score="0" Body="&lt;p&gt;I had this issue with my XPS 13 9730. It's due to UEFI boot being set in BIOS. You need to enable Legacy Boot. I'm trying to work out how to force Elementary OS to install as UEFI because Legacy is much slower.&lt;/p&gt;&#xA;" OwnerUserId="13653" LastActivityDate="2019-06-22T18:04:45.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19225" PostTypeId="1" CreationDate="2019-06-22T19:33:40.240" Score="1" ViewCount="193" Body="&lt;p&gt;I realize with my laptop Asus Vivobook pro, I cannot run Elementary OS .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here I write my Laptop specifics:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel I7 8750H GTX 1050&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Asus Vivobook pro N580GD Bios Version : 313&lt;/p&gt;&#xA;&#xA;&lt;p&gt;16 GB of RAM&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i Run Elementary os gives me this error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ACPI Error (psparse-0537): Method parse/execution failed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i try PCI=noacpi , the system load but i cannot use mouse keyboard etc...&#xA;i try to install but after 50% he told me : I cannot install GRUB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot understand the problem, I prefer LINUX for Work and I really need.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks all&lt;/p&gt;&#xA;" OwnerUserId="18433" LastActivityDate="2023-03-09T15:06:05.690" Title="i cannot run Elementary os" Tags="|release-juno|grub|elementary-project|acpi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19227" PostTypeId="1" CreationDate="2019-06-23T03:35:06.127" Score="1" ViewCount="51" Body="&lt;p&gt;Actually, I suspect the computer is waking up but my external monitor won't display anything (it turns on the backlight but screen remains black). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I end up having to open the lid of the laptop for display to turn on, then I have to close lid again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using VGA port on a T430 thinkpad&lt;/p&gt;&#xA;" OwnerUserId="18435" LastActivityDate="2019-09-03T08:48:23.613" Title="Can't wake up from external monitor plugged in" Tags="|suspend|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19229" PostTypeId="2" ParentId="19202" CreationDate="2019-06-23T07:04:51.220" Score="0" Body="&lt;p&gt;If your snapd version is older than 2.36.2, it might be a font-caching issue, as written &lt;a href=&quot;https://www.omgubuntu.co.uk/2019/03/the-cause-of-slow-snap-app-startup-times-has-been-identified&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-23T07:04:51.220" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19230" PostTypeId="1" CreationDate="2019-06-23T07:08:37.887" Score="0" ViewCount="74" Body="&lt;p&gt;I tried to install a music player called Cantata, and it looks like it is no longer current, now every morning when doing its round of updates I get the message &quot;The repository '&lt;a href=&quot;http://ppa.launchpad.net/ubuntuhandbook1/cantata/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/ubuntuhandbook1/cantata/ubuntu&lt;/a&gt; bionic Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&quot; &#xA;What do I do? What is the command line to remove the repository? &#xA;Thanks! Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2024-02-28T00:04:50.587" Title="Repository troubles - Help!" Tags="|repositories|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19231" PostTypeId="2" ParentId="19114" CreationDate="2019-06-23T07:34:09.860" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;Install and launch &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Go to Files and disable Single Click (see screenshot).&lt;a href=&quot;https://i.stack.imgur.com/I4vsV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I4vsV.png&quot; alt=&quot;elementary tweaks&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-23T07:34:09.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19232" PostTypeId="2" ParentId="19230" CreationDate="2019-06-23T07:35:23.863" Score="0" Body="&lt;p&gt;Okay, I used this link: &lt;a href=&quot;https://www.2daygeek.com/how-to-remove-delete-ppas-on-ubuntu-debian-linux-mint-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.2daygeek.com/how-to-remove-delete-ppas-on-ubuntu-debian-linux-mint-elementary-os/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Method 3 worked fine for me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All clear! &lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2019-06-23T07:35:23.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19233" PostTypeId="2" ParentId="19146" CreationDate="2019-06-23T07:53:47.147" Score="0" Body="&lt;p&gt;@user18324 Try asking the devs of &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt; (who have made possible the Dark Mode on elementary OS). Maybe you'll get a quicker response and share it here.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-23T07:53:47.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19234" PostTypeId="2" ParentId="19222" CreationDate="2019-06-23T08:24:44.913" Score="2" Body="&lt;p&gt;Hmm,&lt;code&gt;Ctrl P&lt;/code&gt; doesn't work either... Amazingly enough, it seems, the printing functionality hasn't been implemented into Code. Well, if you need this feature, you can suggest to implement it via the dedicated &lt;a href=&quot;https://github.com/elementary/code/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/code&lt;/a&gt; github page.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-23T08:24:44.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19237" PostTypeId="2" ParentId="19219" CreationDate="2019-06-23T18:36:03.333" Score="0" Body="&lt;p&gt;If your Terminal displays errors communicating with your display, please check two things.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Displays&lt;/code&gt; and check if your display has been correctly detected by the system.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in terminal: &lt;code&gt;nvidia-smi&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Are the driver version and GPU model shown in the output table? If not, try this procedure to reinstall the driver (worked fine for my NVIDIA card):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Clean the system from any NVIDIA drivers:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2) Add NVIDIA PPA (if you haven't already added it earlier):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers&#xA;&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;3) Install the correct NVIDIA GPU driver and reboot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nvidia-driver430&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(this is the correct driver version for your 930MX GPU, as stated &lt;a href=&quot;https://www.nvidia.com/Download/driverResults.aspx/148435/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;5) Check if the driver has been successfully installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-smi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;6) Check if your system is free from the obsolete open-source &quot;nouveau&quot; driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsmod | grep nouveau&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If the output is negative for &lt;em&gt;nouveau&lt;/em&gt;, then all is well with your installation.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-07-27T07:18:43.060" LastActivityDate="2019-07-27T07:18:43.060" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19238" PostTypeId="1" CreationDate="2019-06-23T19:56:59.510" Score="1" ViewCount="54" Body="&lt;p&gt;I have installed ELementary OS a couple of days ago, but there is a small problem I'm facing at the moment. I own an elitebook 1040 g1 which has a synaptics forcepad built in. In windows, scrolling and gestures work like a dream. In elementary though, it is a little choppy. Sometimes when I let go of scrolling and the page keeps scrolling, it becomes buttery smooth the second I let go of the trackpad. Is there anyone who can help me fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Emiel&lt;/p&gt;&#xA;" OwnerUserId="18437" LastActivityDate="2019-06-23T19:56:59.510" Title="Scrolling using Synaptics Forcepad choppy" Tags="|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19239" PostTypeId="1" CreationDate="2019-06-23T21:09:59.380" Score="1" ViewCount="33" Body="&lt;p&gt;I see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18216/setting-up-a-development-environment-for-elementaryos-apps&quot;&gt;this other question&lt;/a&gt; on a debug workflow for app development. In it, the answer is to use printfs and viewing the printed data on a terminal, but I don't see how that's easy with things like Gala, or settings plugs, etc.&#xA;How should I go about getting, say, Gala off the Github, building it, running it, and stepping through the code?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My background is embedded systems (PIC18), and writing the odd C# app in Visual Studio. With these, I can use an IDE to step through the code, set breakpoints, view variable contents, etc.&lt;/p&gt;&#xA;" OwnerUserId="12263" LastActivityDate="2019-06-23T21:09:59.380" Title="How to debug Gala and other system apps?" Tags="|development|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19244" PostTypeId="2" ParentId="19217" CreationDate="2019-06-24T07:06:31.700" Score="1" Body="&lt;p&gt;I'm not on the elementary development team or anything but there is this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;--&gt; &lt;a href=&quot;https://elementary.io/get-involved&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At that link they state &quot;Everything that we make is 100% open source and developed collaboratively by people from all over the world. Even if you're not a programmer, you can get involved and make a difference.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it's safe to say that you're only bound by the terms of the GNU-GPL which should be easy as long as the distro that you want to create would also be open source.  More reading on the GNU-GPL can be found at &lt;a href=&quot;https://opensource.org/licenses/gpl-license&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://opensource.org/licenses/gpl-license&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can verify this for yourself by going through all the project listings on the &lt;a href=&quot;https://github.com/elementary?page=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryos github account page&lt;/a&gt; and looking at the license, see the attached picture for details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KnoPN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KnoPN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you see a license that you don't know off hand you can look it up &lt;a href=&quot;https://opensource.org/search/node/mit&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; by typing it as it appears on github.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps :)&lt;/p&gt;&#xA;" OwnerUserId="18381" LastActivityDate="2019-06-24T07:06:31.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19245" PostTypeId="2" ParentId="15329" CreationDate="2019-06-24T09:33:48.740" Score="2" Body="&lt;p&gt;So, I tried a lot of different ways of doing this.&lt;/p&gt;&#xA;&lt;p&gt;First, make sure your user is in the bluetooth group.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo usermod -G bluetooth -a &amp;lt;your_username&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Restarting your bluetooth service (and making sure it is enabled to start on boot) should be the next thing you try after checking the rfkill status - see other answers here on that.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo systemctl restart bluetooth    &#xA;$ sudo systemctl enable bluetooth&#xA;Synchronizing state of bluetooth.service with SysV service script with /lib/systemd/systemd-sysv-install.&#xA;Executing: /lib/systemd/systemd-sysv-install enable bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, some bluetooth controllers need to first remove the definition - perhaps you dual boot, or have a previous install - and then add the definition back in.&lt;/p&gt;&#xA;&lt;p&gt;I needed to use the bluetoothctl command line tool to remove and add back, perhaps because I needed to enter a PIN for my bluetooth-enabled amplifier. Like so...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ bluetoothctl&#xA;[NEW] Controller 00:1B:63:43:9B:E6 imac [default]&#xA;[NEW] Device 00:F4:8D:2C:BD:27 STR-DH190&#xA;Agent registered&#xA;[STR-DH190]# help&#xA;Menu main:&#xA;Available commands:&#xA;-------------------&#xA;advertise                                         Advertise Options Submenu&#xA;scan                                              Scan Options Submenu&#xA;gatt                                              Generic Attribute Submenu&#xA;list                                              List available controllers&#xA;show [ctrl]                                       Controller information&#xA;select &amp;lt;ctrl&amp;gt;                                     Select default controller&#xA;devices                                           List available devices&#xA;paired-devices                                    List paired devices&#xA;system-alias &amp;lt;name&amp;gt;                               Set controller alias&#xA;reset-alias                                       Reset controller alias&#xA;power &amp;lt;on/off&amp;gt;                                    Set controller power&#xA;pairable &amp;lt;on/off&amp;gt;                                 Set controller pairable mode&#xA;discoverable &amp;lt;on/off&amp;gt;                             Set controller discoverable mode&#xA;agent &amp;lt;on/off/capability&amp;gt;                         Enable/disable agent with given capability&#xA;default-agent                                     Set agent as the default one&#xA;advertise &amp;lt;on/off/type&amp;gt;                           Enable/disable advertising with given type&#xA;set-alias &amp;lt;alias&amp;gt;                                 Set device alias&#xA;scan &amp;lt;on/off&amp;gt;                                     Scan for devices&#xA;info [dev]                                        Device information&#xA;pair [dev]                                        Pair with device&#xA;trust [dev]                                       Trust device&#xA;untrust [dev]                                     Untrust device&#xA;block [dev]                                       Block device&#xA;unblock [dev]                                     Unblock device&#xA;remove &amp;lt;dev&amp;gt;                                      Remove device&#xA;connect &amp;lt;dev&amp;gt;                                     Connect device&#xA;disconnect [dev]                                  Disconnect device&#xA;menu &amp;lt;name&amp;gt;                                       Select submenu&#xA;version                                           Display version&#xA;quit                                              Quit program&#xA;exit                                              Quit program&#xA;help                                              Display help about this program&#xA;[STR-DH190]# remove 00:F4:8D:2C:BD:27&#xA;[CHG] Device 00:F4:8D:2C:BD:27 ServicesResolved: no&#xA;Device has been removed&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Connected: no&#xA;[DEL] Device 00:F4:8D:2C:BD:27 STR-DH190&#xA;[bluetooth]# scan on&#xA;Discovery started&#xA;[CHG] Controller 00:1B:63:43:9B:E6 Discovering: yes&#xA;[NEW] Device 00:F4:8D:2C:BD:27 STR-DH190&#xA;[bluetooth]# pair 00:F4:8D:2C:BD:27&#xA;Attempting to pair with 00:F4:8D:2C:BD:27&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Connected: yes&#xA;Request PIN code&#xA;[STR-1m[agent] Enter PIN code: xxxx&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Modalias: bluetooth:xxxxxxxxxxxxxxxx&#xA;[CHG] Device 00:F4:8D:2C:BD:27 ServicesResolved: yes&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Paired: yes&#xA;Pairing successful&#xA;[CHG] Device 00:F4:8D:2C:BD:27 ServicesResolved: no&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Connected: no&#xA;[CHG] Device 00:F4:8D:2C:BD:27 RSSI: -56&#xA;[CHG] Device 00:F4:8D:2C:BD:27 RSSI: -48&#xA;[bluetooth]# trust 00:F4:8D:2C:BD:27&#xA;[CHG] Device 00:F4:8D:2C:BD:27 Trusted: yes&#xA;Changing 00:F4:8D:2C:BD:27 trust succeeded&#xA;[bluetooth]# list&#xA;Controller 00:1B:63:43:9B:E6 imac [default]&#xA;[CHG] Device 00:F4:8D:2C:BD:27 RSSI: -56&#xA;[bluetooth]# system-alias big-imac&#xA;Changing big-imac succeeded&#xA;[CHG] Controller 00:1B:63:43:9B:E6 Alias: big-imac&#xA;[bluetooth]# info 00:F4:8D:2C:BD:27&#xA;Device 00:F4:8D:2C:BD:27 (public)&#xA;    Name: STR-DH190&#xA;    Alias: STR-DH190&#xA;    Class: 0x00240414&#xA;    Icon: audio-card&#xA;    Paired: yes&#xA;    Trusted: yes&#xA;    Blocked: no&#xA;    Connected: no&#xA;    LegacyPairing: yes&#xA;    UUID: Serial Port               (...)&#xA;    UUID: Audio Sink                (...)&#xA;    UUID: A/V Remote Control Target (...)&#xA;    UUID: A/V Remote Control        (...)&#xA;    UUID: PnP Information           (...)&#xA;    Modalias: bluetooth:xxxxxxxxxxxx&#xA;    RSSI: -56&#xA;[bluetooth]# exit&#xA;Agent unregistered&#xA;[DEL] Controller 00:1B:63:43:9B:E6 big-imac [default]&#xA;phil@imac:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can now use the widget in the toolbar to control the connection(s) you just created, and the Bluetooth menu in System Settings works as expected.&lt;/p&gt;&#xA;&lt;p&gt;Happy bluetoothing!&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="18440" LastEditorUserId="25518" LastEditDate="2021-06-09T20:18:05.417" LastActivityDate="2021-06-09T20:18:05.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19247" PostTypeId="2" ParentId="19139" CreationDate="2019-06-24T22:13:36.360" Score="0" Body="&lt;p&gt;Try checking &lt;code&gt;Settings&lt;/code&gt; &gt; &lt;code&gt;Behavior&lt;/code&gt; &gt; &lt;code&gt;Always on Top&lt;/code&gt;, then restart SpeedCrunch. After restart it should stay on top of any other apps, including maximized ones.&#xA;(Tested on elementary OS 5.0 Juno, SpeedCrunch 0.12)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-24T22:13:36.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19250" PostTypeId="2" ParentId="19195" CreationDate="2019-06-24T22:23:25.493" Score="0" Body="&lt;p&gt;I managed to find a solution that works fine for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/siliconchaos/bash-scripts/blob/master/ActivateOrLaunch.sh&quot; rel=&quot;nofollow noreferrer&quot;&gt;A convenient bash script&lt;/a&gt; that either launches a program or brings to front its first window. (&lt;em&gt;Also had to install a little keyboard tool called xdotool, used by the script&lt;/em&gt;) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then defined the bash script to be launched as a keyboard shortcut :)&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2019-06-24T22:23:25.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19251" PostTypeId="1" AcceptedAnswerId="19253" CreationDate="2019-06-25T09:04:16.743" Score="0" ViewCount="46" Body="&lt;p&gt;After deleted  the Ubuntu partition and restarted computer, I got this message:&#xA;Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else’s tab lists possible device or file completions.&lt;/p&gt;&#xA;" OwnerUserId="18444" LastActivityDate="2019-07-25T13:02:05.560" Title="Deleted Ubuntu partition from windows 10 and Ubuntu dual system" Tags="|microsoft-windows|ubuntu|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19252" PostTypeId="2" ParentId="19251" CreationDate="2019-06-25T11:04:38.950" Score="0" Body="&lt;p&gt;To boot Windows 10 you need to fix your Windows 10 bootloader. Possible solution: reinstall Windows 10 from installation media (details &lt;a href=&quot;https://support.microsoft.com/en-us/help/4000735/windows-10-reinstall&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;). To keep all your personal apps, files and preferences, select &lt;code&gt;Custom install&lt;/code&gt; &gt; &lt;code&gt;Keep Everything&lt;/code&gt; during installation.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-25T11:04:38.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19253" PostTypeId="2" ParentId="19251" CreationDate="2019-06-25T12:16:07.307" Score="0" Body="&lt;p&gt;You can try to restore your Windows 10 bootloader.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a bootable usb with a Win10 iso.&lt;/li&gt;&#xA;&lt;li&gt;Start as you'll going to reinstall.&lt;/li&gt;&#xA;&lt;li&gt;Enter troubleshooting.&lt;/li&gt;&#xA;&lt;li&gt;Enter Windows Console.&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;bootsect /nt60 drive_letter: /mbr&lt;/code&gt;, where 'drive_letter' is the letter of the partition where your windows is installed.&lt;/li&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;*If step 5 fails, try adding &lt;code&gt;/force&lt;/code&gt; to it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should solve the problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="18362" LastActivityDate="2019-06-25T12:16:07.307" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19256" PostTypeId="1" CreationDate="2019-06-25T18:38:24.097" Score="1" ViewCount="419" Body="&lt;p&gt;Does anyone know how to set a default application that does not appear in the drop-down menu? I use Guayadeque as my music player but it does not appear as an option in the drop-down menu?&lt;a href=&quot;https://i.stack.imgur.com/WHMIg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WHMIg.jpg&quot; alt=&quot;https://i.stack.imgur.com/WHMIg.jpgimage&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3354" LastActivityDate="2024-03-31T23:02:35.313" Title="Setting Default Applications that are NOT standard or available in drop-down menu" Tags="|applications|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19257" PostTypeId="2" ParentId="19256" CreationDate="2019-06-25T21:21:55.950" Score="0" Body="&lt;p&gt;As far as I know, if your app isn't shown in one of these drop-downs, it means that the app hasn't been properly registered in your system. You have to register your app in the system and create a &lt;code&gt;[your-app-name].desktop&lt;/code&gt; file (those usually reside in &lt;code&gt;/usr/share/applications&lt;/code&gt; or &lt;code&gt;/local/share/applications&lt;/code&gt; directories).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A .desktop file is actually a text file, so you can open and edit it in any text editor. Among other things, a .desktop file should contain a &lt;code&gt;Categories&lt;/code&gt; line, which states the category of the app (one or several), which helps the system to properly categorize the app. For instance, for a music player this line usually looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Categories=Audio;Music;Player;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If Guayadeque already has a .desktop file, please check if it contains the &lt;code&gt;Categories&lt;/code&gt; line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On how to register apps and create .desktop files in Ubuntu you can refer to &lt;a href=&quot;https://itsfoss.com/add-application-list-open-applications-ubuntu-1310/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-25T21:21:55.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19258" PostTypeId="1" CreationDate="2019-06-26T01:41:18.537" Score="0" ViewCount="131" Body="&lt;p&gt;I was attracted to Elementary OS for the features.  Running Juno on a laptop.&#xA;I'm trying to get a midi controller to playback sound.  It is a M-Audio Radium 49 and connects via USB.  The lsusb program finds the controller when it&#xA;is pulled in as 'Midiman M-Audio Keyboard loader'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I cannot find the correct combination of software, synths, patches and sound fonts to get it to make any sound.&lt;br&gt;&#xA;I do have a windows machine and plug it in and make sounds with MuseScore.  The same setup on Elementary OS doesn't produce any sounds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note, I did get a USB audio interface running with Ardour without anything other than adding my user to the audio group.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be great to have a few Audio tutorials specific to recording and Digital Audio Workstation setups.&lt;/p&gt;&#xA;" OwnerUserId="18447" LastEditorUserId="16827" LastEditDate="2019-06-26T17:11:12.647" LastActivityDate="2023-12-09T04:11:46.420" Title="midi controller setup - no sound" Tags="|release-juno|audio|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19261" PostTypeId="1" CreationDate="2019-06-26T21:12:21.867" Score="0" ViewCount="135" Body="&lt;p&gt;Looking through the documentation on Houston and other questions here, it is a hard requirement that all apps be a native GTK application for hosting on the store. Does that extend to GTK# due to the native binding? I'm a C# guy through and through and Visual Studio has some pretty great design tools for GTK# to help a poor &quot;bad at UI&quot; guy like me out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the answer is yes but I don't want to be the &quot;well actually&quot; person trying to fight with app review on App Center if I write the app and I get denied due to using the Mono platform.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="18453" LastActivityDate="2024-03-09T20:02:00.233" Title="GTK# Apps in the Store" Tags="|appcenter|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19267" PostTypeId="2" ParentId="17887" CreationDate="2019-06-28T08:06:15.253" Score="1" Body="&lt;p&gt;All I can confirm, you can &lt;em&gt;play back&lt;/em&gt; files encoded with Dolby Atmos on VLC 3.0 (here'a a couple of &lt;a href=&quot;https://www.dolby.com/us/en/guide/dolby-atmos-trailers.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;test video files&lt;/a&gt;). As to the presence of Dolby Atmos in-system configuration utility in elementary OS - I seriously doubt that, because of licensing issues (elementary OS is free and Dolby Access software is a commercial product).&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-06-28T08:06:15.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19268" PostTypeId="2" ParentId="19225" CreationDate="2019-06-28T08:19:02.777" Score="1" Body="&lt;p&gt;How I solve it :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read only my GTX 1050 is not compatible with ubuntu without a driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I during boot I click &quot;e&quot; Button and I wrote after quiet splash This :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;nouveau.modeset=0 &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;after that, I install Elementary os as normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the first start-up, I use just put nouveau.modeset=0 on the boot screen&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after I went to the software center and I install Nvidia Drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now Elementary os Works fine.&lt;/p&gt;&#xA;" OwnerUserId="18433" LastActivityDate="2019-06-28T08:19:02.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19269" PostTypeId="1" CreationDate="2019-06-28T17:01:31.380" Score="1" ViewCount="112" Body="&lt;p&gt;I'm new to linux and I recently started using elementary OS. What is my problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm trying to instal my WacomOne tablet driver folowing the guide offered by &quot;The Linux Wacom Project&quot; from here: &lt;a href=&quot;https://github.com/linuxwacom/input-wacom/wiki/Installing-input-wacom-from-source&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/linuxwacom/input-wacom/wiki/Installing-input-wacom-from-source&lt;/a&gt; .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did? I downloaded the files and now I'm trying to compile the code using the code given by them:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ if test -x ./autogen.sh; then ./autogen.sh; else ./configure; fi &amp;amp;&amp;amp; make &amp;amp;&amp;amp; sudo make install || echo &quot;Build Failed&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But I get an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;bash: syntax error near unexpected token `then'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Do anyone have any idea why? Sorry if this is a silly question :(&lt;/p&gt;&#xA;" OwnerUserId="18464" LastActivityDate="2019-06-28T17:01:31.380" Title="syntax error near unexpected token `then'" Tags="|drivers|wacom|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19271" PostTypeId="1" CreationDate="2019-06-29T09:18:27.837" Score="0" ViewCount="150" Body="&lt;p&gt;Since I have installed the os there is no possibility to connect using the WiFi. &#xA;I am still able to connect to Internet using the USB thetering of my phone. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would you please advice on how to get back online using WiFi? &lt;/p&gt;&#xA;" OwnerUserId="18467" LastEditorUserId="3018" LastEditDate="2019-07-09T13:06:51.133" LastActivityDate="2024-03-15T00:07:56.040" Title="Wifi doesn't work" Tags="|wifi|drivers|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19272" PostTypeId="1" AcceptedAnswerId="19274" CreationDate="2019-06-29T11:04:05.030" Score="2" ViewCount="2673" Body="&lt;p&gt;i'm new to elementryOS, using elementryOS Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i want to make as much as possible custom keyboard shortcuts for myself.&#xA;so i would need to use my mouse as little as possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i mean like making ctrl + alt + s to open my system settings and such.&#xA;in my windows i've used the run prompt with shortcuts in the PATH, so i could have run shortcuts with shortcuts in the prompt.&#xA;i was hoping that in linux there will even be an option to make my own keyboard shortcuts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is there any option like that?&lt;/p&gt;&#xA;" OwnerUserId="18469" LastActivityDate="2020-02-15T15:10:07.520" Title="how to make custom keyboard shortcuts?" Tags="|keyboard-shortcuts|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19273" PostTypeId="2" ParentId="19272" CreationDate="2019-06-29T14:37:49.480" Score="1" Body="&lt;p&gt;Open System settings &gt; keyboard and there you will find &quot;Shortcuts&quot; tab, contains all the shortcuts. You can freely assign any key or combination you want. you can add custom command and bind it to any key/combination as well&lt;/p&gt;&#xA;" OwnerUserId="18458" LastActivityDate="2019-06-29T14:37:49.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19274" PostTypeId="2" ParentId="19272" CreationDate="2019-06-29T14:47:17.400" Score="2" Body="&lt;p&gt;I'm new to eOS, and Linux, too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just try to use Custom Shortcuts to launch apps. It seems do the trick.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/WCn1E.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WCn1E.png&quot; alt=&quot;Custom Keyboard Shortcuts to Launch Application&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the Command Line to launch specific app, &lt;em&gt;AppEditor&lt;/em&gt; have some handy informaitons. As I'm not familar with command line.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ed0V3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ed0V3.png&quot; alt=&quot;AppEditor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;AppEditor&lt;/em&gt; can be installed from AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No idea is it a proper way. Any experienced user, please advise.&lt;/p&gt;&#xA;" OwnerUserId="18318" LastEditorUserId="18318" LastEditDate="2020-02-15T15:10:07.520" LastActivityDate="2020-02-15T15:10:07.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19275" PostTypeId="1" CreationDate="2019-06-30T03:36:34.337" Score="0" ViewCount="68" Body="&lt;p&gt;i downloaded the lastest version of elementary os, after i install it and use for many hours i tried to shut dowm, but i didn't work. I tried a lot of time, but nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i'm using the OS 5 Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone knows how to help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks.&lt;/p&gt;&#xA;" OwnerUserId="18470" LastActivityDate="2019-07-15T19:32:55.233" Title="Elementary OS won't shut down" Tags="|release-juno|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19276" PostTypeId="2" ParentId="19271" CreationDate="2019-06-30T14:21:59.583" Score="0" Body="&lt;p&gt;Sounds like you are missing a driver.  I had a similar problem and was fixed when I ran updates after install.  If not you need to find you wifi card and download the driver for it.  What are the specs for your computer?&lt;/p&gt;&#xA;" OwnerUserId="15755" LastActivityDate="2019-06-30T14:21:59.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19277" PostTypeId="1" AcceptedAnswerId="19302" CreationDate="2019-06-30T20:00:48.987" Score="1" ViewCount="966" Body="&lt;p&gt;I've been using eOS Juno since feb 2019. FYI, initial RAM usage is at 20% (total RAM 8GB, 7.1GB available), at the end 45-50% (after closing all running applications.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: This is an HP laptop, with Quad-Core AMD A8-7410 APU with AMD Radeon R5 Graphics(2GB). Model number is HP AF008AX.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before this, I'd been using eOS 0.4 on a HDD. I decided to install Juno on a new Kingston 240GB SSD. For a while the ram usage was similar to v0.4 but since past 2-3 months I've noticed that if I keep using system for long, then the RAM usage keeps increasing even though I use it for browsing(e.g. Firefox or sometimes Brave browser) and occasional small coding projects on Code or VSCode, the number of tabs on used browser (Firefox/Brave) never go above 10 but RAM usage from start keeps increasing. Sometimes, on weekends system stays on for about 10+ hours, which means that I've to restart the system to avoid stuttering and lag due high unrecoverable RAM (and processor) usage.   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even if I close all the applications, the RAM recovered is about same as used as all the applications' usage in start. And there's an amount of RAM that can't be recovered until I restart my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please guide me how/why it is happening and if there's a way to avoid it or if its normal. Any help is appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: gala has 11 instances shown in htop with each taking 2.8%, could that be a reason?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jCwfL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jCwfL.png&quot; alt=&quot;htop info&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8574" LastEditorUserId="8574" LastEditDate="2019-07-02T20:04:46.390" LastActivityDate="2019-12-03T03:03:00.380" Title="Increased idle RAM usage with time on eos Juno" Tags="|release-juno|updates|pantheon|uefi|amd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19279" PostTypeId="1" CreationDate="2019-07-01T14:29:11.167" Score="0" ViewCount="70" Body="&lt;p&gt;I installed Elementary OS a couple of days back. The windows + L key worked fine till sometime back but when i now do the same the screen turns black and i have no other option but to force shutdown it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works fine in locking the screen from the UI &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked other solutions online but was unable to find the answer. Can anyone suggest how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="18479" LastActivityDate="2024-03-14T13:08:21.087" Title="Black screen on locking the elementary OS with windows + L key" Tags="|display|lock|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19280" PostTypeId="2" ParentId="19277" CreationDate="2019-07-01T21:13:53.933" Score="0" Body="&lt;p&gt;I'm making this an answer because I don't have enough reputation to comment.&#xA;This sounds like a memory leak. A good first step is to install and run htop to see if any processes are consuming quite a bit of memory. From the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then once you've installed it, &lt;code&gt;htop&lt;/code&gt;. Once in htop, press F6 on the keyboard, and scroll down and select &lt;code&gt;percent_mem&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If nothing sticks out there, it might be a memory leak in one of the drivers. Graphics drivers are quite likely the fault (I've had similar issues before with my AMD GPU). Could you check what GPU driver is installed?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mesa-utils&#xA;glxinfo | grep -i &quot;vendor\|rendering&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Could you mention what your computer mainboard is, and if you have any other hardware installed? Edit: Is this in a laptop? What computer is it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another question I referenced to make this answer:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/28033/how-to-check-the-information-of-current-installed-video-drivers&quot;&gt;xorg - How to check the information of current installed video drivers? - Ask Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12263" LastEditorUserId="12263" LastEditDate="2019-07-01T21:19:54.593" LastActivityDate="2019-07-01T21:19:54.593" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="19281" PostTypeId="2" ParentId="16620" CreationDate="2019-07-02T00:37:34.997" Score="0" Body="&lt;p&gt;I used this method by installing wmctrl:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install wmctrl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then write the following command of the active corner:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -k on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It worked for me... &lt;/p&gt;&#xA;" OwnerUserId="18484" LastActivityDate="2019-07-02T00:37:34.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19282" PostTypeId="1" CreationDate="2019-07-02T07:01:10.193" Score="0" ViewCount="98" Body="&lt;p&gt;I have discoverd Lyrics app recently, it looks great.&#xA;But I have a big issue: the Lyric's window is empty when Melody is playing a song.&#xA;Lyrics knows a song is played but no lyrics are displayed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried with Give Me Lyrics: it isn't aware when Melody is playing a song... :/ &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea?&#xA;Thank you!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xT0zY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xT0zY.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18485" LastActivityDate="2024-03-12T19:03:20.427" Title="Lyrics app with Melody" Tags="|release-juno|appcenter|music|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19284" PostTypeId="1" CreationDate="2019-07-02T15:52:59.177" Score="1" ViewCount="29" Body="&lt;p&gt;If I were to install this in a computer lab, would I be able to control all the devices from a &quot;teacher&quot; device. Lock screens, send to certain websites, open apps, etc. &lt;/p&gt;&#xA;" OwnerUserId="18487" LastEditorUserId="15904" LastEditDate="2020-02-19T16:57:48.587" LastActivityDate="2024-02-29T08:00:30.080" Title="Is there a way to manage multiple devices from a single location" Tags="|applications|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19286" PostTypeId="1" CreationDate="2019-07-02T20:18:01.333" Score="1" ViewCount="173" Body="&lt;p&gt;I entered sudo bash and I can't get back to the normal command prompt mode. Exit just closes the terminal. A restart didn't help either. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would like to exit the bash mode so I don't mess anything up. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="18490" LastActivityDate="2019-08-06T13:57:50.833" Title="Dumb Noob question: Terminal is stuck in bash edit mode" Tags="|pantheon-terminal|bash|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19289" PostTypeId="1" CreationDate="2019-07-03T16:25:53.720" Score="1" ViewCount="281" Body="&lt;p&gt;Just a quick question. I have a Logitech MX Master mouse and the thumb button on it is bound by default to Ctrl+Alt+Tab. In Elementary, this looks to do nothing but unfocus my current window. I was looking for a way to rebind this but any change I make in the Keyboard section of Settings to bind something else to this combo does not change it. Even after the rebind the key combination does the same thing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a setting somewhere I'm missing? I can't find where Ctrl+Alt+Tab is even bound in the Keyboard section to replace it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Erik&lt;/p&gt;&#xA;" OwnerUserId="18493" LastActivityDate="2019-07-03T16:50:02.257" Title="Rebind Ctrl+Alt+Tab" Tags="|release-juno|keyboard-shortcuts|keyboard|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19290" PostTypeId="2" ParentId="19289" CreationDate="2019-07-03T16:50:02.257" Score="1" Body="&lt;p&gt;I found it! The answer was yes, I was missing something. This is a gnome bound key combination to switch panels. I found the setting using:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings list-recursively | grep -i Tab&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and replaced it by using &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings switch-panels &quot;['&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;Tab']&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, since Gnome wasn't overriding my Key Combination, Control+Alt+Tab now does what I bound it to!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this is possible, but could Elementary detect duplicates of these Key Combinations at the Gnome Settings level as well? I think when you bind key combinations there are checks for duplicates, but I assume they don't extend to these Gnome key combinations since I could set this hotkey but it just didn't override. Elementary Staff, is this something that could even be done? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the best!&#xA;-Erik&lt;/p&gt;&#xA;" OwnerUserId="18493" LastActivityDate="2019-07-03T16:50:02.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19292" PostTypeId="1" CreationDate="2019-07-04T02:48:20.990" Score="1" ViewCount="114" Body="&lt;p&gt;Been using Juno for a week; love the experience of NOT even attempting any customization - except for 3 keyboard shortcuts  I had to :) one thing that I am finding difficult is in file-chooser dialog (eg: extract archive; save as from browser etc), I have to use the mouse to get the focus to path/location bar. 90% of the time, I need to change from previous folder I was in, the way I work. In Files application, CTRL-L works perfectly; but I am unable to find a shortcut for this in these instances. I have checked documentation and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10684/list-of-keyboard-shortcuts-for-files&quot;&gt;list of keyboard shortcuts for Files&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="18495" LastActivityDate="2019-07-05T13:54:08.007" Title="Shortcut to focus on file-chooser dialog - CTRL-L doesn't work" Tags="|release-juno|pantheon-files|" AnswerCount="1" CommentCount="0" ClosedDate="2019-07-07T03:02:21.530" ContentLicense="CC BY-SA 4.0" />
  <row Id="19293" PostTypeId="2" ParentId="19261" CreationDate="2019-07-04T13:03:56.817" Score="0" Body="&lt;p&gt;The short answer is yes, a GTK# application would be accepted into the AppCenter repositories assuming it met the rest of the review process (basically that it doesn't do anything questionably legal or mess with the system).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other thing to be aware of is that it must be a GTK 3 interface, not GTK 2. I'm pretty sure that'll be the case by default with GTK# though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the part where you're possibly making life more difficult for yourself is the fact that I don't think I've seen any C#/Mono/GTK# apps in the AppCenter yet, so there won't be any handy examples of how to set up your build tools and packaging files so that Houston (the build/testing server for AppCenter) can automatically build, test and publish your app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not an insurmountable problem, I'm sure someone somewhere has packaged a GTK# application for debian based distros before, but you're less likely to get quick help and support as it's something that the elementary team will be more unfamiliar with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you had a look at Vala (the language used for elementary OS itself and the included apps)? The syntax is incredibly similar to C# and you could consider tools like Glade or the nightly builds of GNOME builder via flatpak (that now include built in Glade) to design UIs. That said, I'd recommend at least trying to build UIs in code without a designer as it teaches you how things interact much quicker.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps! Good luck with your app development, I hope to see some of your apps in the store in the future!&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2019-07-04T13:03:56.817" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19299" PostTypeId="2" ParentId="19292" CreationDate="2019-07-05T13:54:08.007" Score="1" Body="&lt;p&gt;At the moment, only the pathbar of the filechooser is supplied by Files, the rest (including keypress handling) is the standard Gtk filechooser so I am not sure this can be fixed. However, the intention is to use the NativeFileChooser interface to have the whole filechooser supplied by Files in which the shortcut will work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have raised an issue on the Files issue reporting page about it.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-07-05T13:54:08.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19300" PostTypeId="1" AcceptedAnswerId="19306" CreationDate="2019-07-05T17:54:49.133" Score="1" ViewCount="280" Body="&lt;p&gt;All&#xA;Is there any way to disable the sidebar in Code &lt;strong&gt;permanently&lt;/strong&gt;? &#xA;I've searched everywhere. in I can't find this option in code and OS settings. &lt;/p&gt;&#xA;" OwnerDisplayName="user18497" LastActivityDate="2021-08-10T20:11:44.150" Title="Code - Toggle sidebar" Tags="|code|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19302" PostTypeId="2" ParentId="19277" CreationDate="2019-07-06T01:29:01.947" Score="1" Body="&lt;p&gt;I updated my kernel to kernel v4.18 on my Acer laptop with a AMD A12 and Radeon RX and it gave me all types of problems, went back to 4.15 and the problems stopped. I would try down grading your kernel to the default kernel and see if that helps.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-07-06T01:29:01.947" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19304" PostTypeId="2" ParentId="18818" CreationDate="2019-07-06T01:39:07.777" Score="0" Body="&lt;p&gt;If you did not get the login boot loop after you did the eos install i dont think you need to worry, just sit back and enjoy the elementary journey. &lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-07-06T01:39:07.777" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19306" PostTypeId="2" ParentId="19300" CreationDate="2019-07-06T05:21:37.327" Score="1" Body="&lt;p&gt;It looks like hiding the sidebar permanently hasn't been implemented into Code. Indeed, the app always restores its sidebar after restart, and, as far as I know, there is no shortcut for toggling the sidebar as well. You can suggest to implement this feature via the dedicated &lt;a href=&quot;https://github.com/elementary/code/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/code&lt;/a&gt; github page.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-06T05:21:37.327" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19307" PostTypeId="1" CreationDate="2019-07-06T09:01:48.603" Score="1" ViewCount="273" Body="&lt;p&gt;Example Pictures:&lt;p&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hQlk0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hQlk0.png&quot; alt=&quot;Writer drop-down menu&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TDXk9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TDXk9.png&quot; alt=&quot;Writer drop-down menu glitch after close menu&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/oli30.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oli30.png&quot; alt=&quot;Other menu glitch example&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have same problem in other apps like Gimp.&lt;p&gt;&#xA;What can I do to solve this problem?&lt;p&gt;&#xA;Thx&lt;/p&gt;&#xA;" OwnerUserId="18509" LastActivityDate="2023-12-20T01:06:10.723" Title="Drop-down menus in some Applications have visual problems" Tags="|libreoffice|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19310" PostTypeId="1" CreationDate="2019-07-06T15:41:14.583" Score="0" ViewCount="1214" Body="&lt;p&gt;slow boot elementaryos juno I still haven't solved this problem, I read earlier responses to this slow boot question but none helped.please help&lt;/p&gt;&#xA;&lt;p&gt;systemd-analyze critical-chain picture&lt;a href=&quot;https://i.stack.imgur.com/ZxcVO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18512" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2022-04-23T00:52:49.647" Title="elementaryos slow boot" Tags="|release-juno|boot|grub|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19313" PostTypeId="2" ParentId="19307" CreationDate="2019-07-07T07:16:12.607" Score="0" Body="&lt;p&gt;&lt;strong&gt;@pbernardino&lt;/strong&gt;, the issue is probably a video glitch, but I doubt it's due to insufficient RAM or video memory, because I have experienced it on a very powerful machine with enough memory. So I guess this is what can be done about it:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a list of apps (in addition to LibreOffice and GIMP) where this drop-shadow glitch can be found, and update your post with it. This way it'll be easier to understand, what may cause the glitch (e. g., some specific library that these apps are using).&lt;/li&gt;&#xA;&lt;li&gt;To make sure that the glitch is elementaryOS-specific (and, say, not Ubuntu-specific), it'd be great to test it on Ubuntu system. If it is present on Ubuntu too, then you can file a bugreport on &lt;a href=&quot;https://launchpad.net/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu's Launchpad page&lt;/a&gt;. If it doesn't, try submitting a bugreport to elementary OS devs on a dedicated &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;github page&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-07T07:16:12.607" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19314" PostTypeId="2" ParentId="19282" CreationDate="2019-07-07T07:46:45.567" Score="0" Body="&lt;p&gt;To speed things up, you may want to report this issue directly to &lt;a href=&quot;https://github.com/naaando/lyrics/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lyrics&lt;/a&gt; or &lt;a href=&quot;https://github.com/muriloventuroso/givemelyrics/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;Give Me Lyrics&lt;/a&gt; developers.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-07T07:46:45.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19315" PostTypeId="2" ParentId="1946" CreationDate="2019-07-07T07:53:11.397" Score="21" Body="&lt;p&gt;This currently can be configured from &lt;code&gt;System Settings -&amp;gt; Keyboard&lt;/code&gt; like&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mMh7G.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mMh7G.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3412" LastEditorUserId="3412" LastEditDate="2020-07-29T04:19:36.283" LastActivityDate="2020-07-29T04:19:36.283" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19316" PostTypeId="2" ParentId="19310" CreationDate="2019-07-07T09:30:13.140" Score="0" Body="&lt;p&gt;Have you tried editing your /etc/systemd/system.conf file?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/systemd/system.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Uncomment the &lt;strong&gt;#DefaultTimeoutStartSec&lt;/strong&gt; line and set it to 5 seconds:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DefaultTimeoutStartSec=5s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then save the file, reboot and see if it helps.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-07T09:30:13.140" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19317" PostTypeId="1" CreationDate="2019-07-07T11:37:35.103" Score="0" ViewCount="295" Body="&lt;p&gt;i'm sorry for my bad english, &#xA;how to kill process in terminal on elementary OS? &#xA;but when i use onboard keyboard, i can use this method (Ctrl + C).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FYI : my keyboard is fine (works in my windows)&lt;/p&gt;&#xA;" OwnerUserId="18516" LastActivityDate="2021-02-02T23:28:27.913" Title="Ctrl + C cant kill process in terminal" Tags="|pantheon-terminal|gnome-terminal|processes|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19318" PostTypeId="2" ParentId="19286" CreationDate="2019-07-07T12:52:53.357" Score="0" Body="&lt;p&gt;Does running the command &lt;code&gt;reset&lt;/code&gt; help?&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-07T12:52:53.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19319" PostTypeId="1" CreationDate="2019-07-08T05:55:02.267" Score="1" ViewCount="105" Body="&lt;p&gt;I have just transferred my E books that I used in Apple OS so they are in epub format.  What programme will open these?  I am unable to find a free one.  And definitely not in the repository?  I'm still learning&lt;/p&gt;&#xA;" OwnerUserId="18391" LastActivityDate="2019-08-05T17:25:46.800" Title="Epub extensions" Tags="|release-juno|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19320" PostTypeId="2" ParentId="19319" CreationDate="2019-07-08T08:20:03.667" Score="1" Body="&lt;p&gt;You may give &lt;a href=&quot;https://calibre-ebook.com/download_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;calibre&lt;/a&gt; a try. It's a free, open-source and cross-platform ebook manager/converter/reader, which supports .epub among other popular formats.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BTW, if you're unable to find calibre in your AppCenter or add its repository to your system, this probably means you have to execute &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt; command, which will allow to install apps from other (non-system) repositories. &lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-08T08:20:03.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19321" PostTypeId="2" ParentId="17341" CreationDate="2019-07-08T11:41:00.167" Score="1" Body="&lt;p&gt;Yep, the hibernate option in Power panel doesn't work indeed (checked that myself). As it was mentioned &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/101&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, it's possible to hibernate your PC via &lt;code&gt;sudo systemctl hibernate&lt;/code&gt; command, but impossible to do that via the elementary's power control panel. Long story short, after some &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/78&quot; rel=&quot;nofollow noreferrer&quot;&gt;discussion&lt;/a&gt; the devs have decided to &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/pull/112&quot; rel=&quot;nofollow noreferrer&quot;&gt;remove&lt;/a&gt; Hibernate option from elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-08T11:41:00.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19322" PostTypeId="1" CreationDate="2019-07-08T19:49:19.057" Score="0" ViewCount="37" Body="&lt;p&gt;My internet provider has banned elementary.io and I think all elementary servers, because I can't install anything (soft) and can't get updates too. I got a ISO of elementary just by using proxy extension in chrome. Can I change like, I don't know, mirrors when I use Elementary OS? Or it's not possible?&lt;/p&gt;&#xA;" OwnerUserId="18523" LastActivityDate="2019-07-08T19:49:19.057" Title="Can I get soft and updates NOT from elementary servers?" Tags="|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19323" PostTypeId="1" CreationDate="2019-07-08T23:40:39.690" Score="0" ViewCount="105" Body="&lt;p&gt;I get a failed to fetch updates message when I open the App centre.  Below are the details displayed in the details dropdown.  No big deal but annoying&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: GPG error: &lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A87FF9DF48BF1C90&#xA;E: The repository '&lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease' is not signed.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: &lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease is not (yet) available (The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A87FF9DF48BF1C90)&lt;/p&gt;&#xA;" OwnerUserId="18391" LastActivityDate="2024-03-14T16:08:11.000" Title="Failed to fetch updates messsage" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19324" PostTypeId="2" ParentId="17341" CreationDate="2019-07-09T00:25:15.813" Score="0" Body="&lt;p&gt;I simply press the power option in the top right hand corner and select the option &quot;SUSPEND&quot;&#xA;this puts the pc into hybernation mode&#xA;to restart just press any key and everything reappears&lt;/p&gt;&#xA;" OwnerUserId="18391" LastActivityDate="2019-07-09T00:25:15.813" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19325" PostTypeId="2" ParentId="19279" CreationDate="2019-07-09T00:36:56.230" Score="0" Body="&lt;p&gt;Yes my screen turns black.  When I press windows + L again it comes back to the start screen and prompts me for login password (if enabled) and then resumes where you left off&lt;/p&gt;&#xA;" OwnerUserId="18391" LastActivityDate="2019-07-09T00:36:56.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19326" PostTypeId="2" ParentId="19323" CreationDate="2019-07-09T04:56:22.930" Score="0" Body="&lt;p&gt;Looks like Spotify's repository signing key is missing on your system. To install it, execute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 931FF8E79F0876134EDDBDCCA87FF9DF48BF1C90&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(as written &lt;a href=&quot;https://www.spotify.com/int/download/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; in 'Debian package' section).&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-09T04:56:22.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19327" PostTypeId="1" CreationDate="2019-07-09T09:42:55.740" Score="0" ViewCount="108" Body="&lt;p&gt;Absolute beginner for everything regarding Linux here. I wanted to try it on an old laptop to see if I liked it before putting it on my actual computer but I had some issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install Elementary several times on my computer but it does not seem to work. When I reboot my pc, it launch, but from the USB drive, not from the computer. &#xA;Here's what I did:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I formatted the computer, so Windows was basically a clean slate of nothing. &lt;/li&gt;&#xA;&lt;li&gt;I set up my USB drive using Rufus and dowloading Elementary from the original website. &lt;/li&gt;&#xA;&lt;li&gt;I went into the BiOs to change the order and put the USB as the primary source to boot. &lt;/li&gt;&#xA;&lt;li&gt;Computer turn on, I installed Elementary, told me that the changes would not be taken into account until I reset the computer, so I did... &lt;/li&gt;&#xA;&lt;li&gt;... but when it turns on again, it boots from the USB drive. I tried turning it off and on again without the USB drive and it told me there was no BiOs on the computer, which make sense since I deleted windows when I first install Elementary (on purpose, I just want Linux on that computer). &lt;/li&gt;&#xA;&lt;li&gt;I tried to reinstall it, and to take off the USB before rebooting, but it displayed a black screen with a lot of error. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So. Not sure what I can do from now on. It works with the USB I guess, but I did not try to install anything so I'm not sure if it will keep any change I make if I turn it off?&lt;/p&gt;&#xA;" OwnerUserId="18525" LastActivityDate="2024-03-15T03:06:05.717" Title="I can't install Elementary-Juno on my laptop" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19328" PostTypeId="2" ParentId="19327" CreationDate="2019-07-09T11:10:01.883" Score="0" Body="&lt;p&gt;Basically, the first time you installed and didn't removed USB Drive due to which it booted again from USB Drive as the Boot Order was set. The second time you removed USB Drive earlier while it was in use hence it caused to display a lot of errors on the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please follow the following steps in order to get you system running:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make USB Drive Bootable using Rufus and Elementary OS' ISO.&lt;/li&gt;&#xA;&lt;li&gt;Restart the system and set boot order from BIOS to boot it from USB Drive&lt;/li&gt;&#xA;&lt;li&gt;Restart the computer to boot from USB Drive&lt;/li&gt;&#xA;&lt;li&gt;Install Elementary OS Juno&lt;/li&gt;&#xA;&lt;li&gt;When it tells you to restart, &lt;strong&gt;DO NOT&lt;/strong&gt; unplug the USB. Just restart and go to BIOS again before it boots from USB again.&lt;/li&gt;&#xA;&lt;li&gt;Reset the Boot Order to boot from Hard Disk first.&lt;/li&gt;&#xA;&lt;li&gt;Save Settings and restart&#xA;You are good to go.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15958" LastActivityDate="2019-07-09T11:10:01.883" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19329" PostTypeId="2" ParentId="19271" CreationDate="2019-07-09T12:32:27.270" Score="0" Body="&lt;p&gt;Maybe you have some drivers or packages missing. This worked for me: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5045/wifi-icon-on-wing-panel-disappeared&quot;&gt;WiFi icon on wing panel disappeared&lt;/a&gt;. Try it. I face such an issue many times (mainly after huge updates) and, until it is fixed, we will experience that problem.&lt;/p&gt;&#xA;" OwnerUserId="18279" LastActivityDate="2019-07-09T12:32:27.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19332" PostTypeId="1" CreationDate="2019-07-09T18:19:17.123" Score="0" ViewCount="73" Body="&lt;p&gt;I have a tp link archer t2uh usb wifi dongle. I can't make it work. I tried to find a solution online, but I never used linux before. I really need help with this. I don't want to give up on linux just yet...&lt;/p&gt;&#xA;" OwnerUserId="18527" LastActivityDate="2019-07-10T12:25:22.533" Title="Can't connect on wifi" Tags="|wifi|drivers|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19335" PostTypeId="1" CreationDate="2019-07-10T13:40:46.670" Score="0" ViewCount="330" Body="&lt;p&gt;Here is a link showing my terminal. I can not install Wine and it is frustrating, Please offer some advice.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zwy2S.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/zwy2S.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18532" LastActivityDate="2024-02-05T16:07:05.910" Title="Unable to install Wine; Using instructions from WineHQ" Tags="|wine|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19336" PostTypeId="2" ParentId="19335" CreationDate="2019-07-10T16:20:49.183" Score="0" Body="&lt;p&gt;In elementary OS it is not possible to add PPAs by default. You need to enable this feature with &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-07-10T16:20:49.183" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19337" PostTypeId="1" CreationDate="2019-07-10T18:09:08.467" Score="0" ViewCount="163" Body="&lt;p&gt;I'm writing a vala GTK+ application and want to add a modal dialog like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var dialog = new Gtk.Dialog.with_buttons (_(&quot;My title&quot;), this,&#xA;    Gtk.DialogFlags.MODAL | Gtk.DialogFlags.DESTROY_WITH_PARENT,&#xA;    _(&quot;Yes&quot;),&#xA;    Gtk.ResponseType.OK,&#xA;    _(&quot;No&quot;),&#xA;    Gtk.ResponseType.NO,&#xA;    null);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The dialog appears and behaves correctly, but the title is missing.&#xA;Any idea why? Anything special about gala?&#xA;I couldn't find any mention of this problem on the web so far.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on a clean installation of elementary OS 5 Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MCVE in &lt;code&gt;Application.vala&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public void show_dialog(Gtk.Window window) {&#xA;  var dialog = new Gtk.Dialog.with_buttons (&quot;My title&quot;, window,&#xA;      Gtk.DialogFlags.MODAL | Gtk.DialogFlags.DESTROY_WITH_PARENT,&#xA;      &quot;Yes&quot;,&#xA;      Gtk.ResponseType.OK,&#xA;      &quot;No&quot;,&#xA;      Gtk.ResponseType.NO,&#xA;      null);&#xA;&#xA;  dialog.response.connect((response_id) =&amp;gt; {&#xA;    dialog.close();&#xA;  });&#xA;&#xA;  dialog.show_all ();&#xA;}&#xA;&#xA;int main (string[] args) {&#xA;  Gtk.init (ref args);&#xA;&#xA;  var window = new Gtk.Window ();&#xA;  window.title = &quot;First GTK+ Program&quot;;&#xA;  window.border_width = 10;&#xA;  window.window_position = Gtk.WindowPosition.CENTER;&#xA;  window.set_default_size (350, 70);&#xA;  window.destroy.connect (Gtk.main_quit);&#xA;&#xA;  var button = new Gtk.Button.with_label (&quot;Click me!&quot;);&#xA;  button.clicked.connect (() =&amp;gt; {&#xA;    show_dialog(window);&#xA;  });&#xA;&#xA;  window.add (button);&#xA;  window.show_all ();&#xA;&#xA;  Gtk.main ();&#xA;  return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Compiled with &lt;code&gt;valac --pkg gtk+-3.0 Application.vala&lt;/code&gt; results in this dialog displayed when I click the button:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hDtz4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hDtz4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18361" LastEditorUserId="18361" LastEditDate="2019-07-14T16:20:12.153" LastActivityDate="2019-07-14T16:20:12.153" Title="Missing title in GTK+ 3 Dialog" Tags="|gtk|vala|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19340" PostTypeId="1" CreationDate="2019-07-11T07:50:05.207" Score="1" ViewCount="763" Body="&lt;p&gt;I think Wingpanel having the ability to dodge maximized, or to integrate maximized window borders the way Unity used to. Plank has done this for years, as does Xfce, KDE, etc. It doesn't seem like a complex feature and many users would benefit. One reason is the irritation of moving my cursor to the upper corner of the screen and finding that I passed up the X button. Cursor gymnastics! That and having a window border beneath a panel is cosmetically unpleasing. Bringing back Wingpanel Slim would be a welcoming option as well. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="18536" LastActivityDate="2019-08-27T07:01:10.137" Title="Wingpanel Setting to Hide When Windows are Maximized" Tags="|settings|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19342" PostTypeId="1" AcceptedAnswerId="19354" CreationDate="2019-07-11T17:30:14.610" Score="0" ViewCount="37" Body="&lt;p&gt;I have a laptop (primary screen) with a connected monitor (second screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When some program (for example, a video, a game...) is opened full screen on the monitor, it gets locked and the image doesn't refresh (for a video, it gets stuck at the first frame, although it continues playing both audio and video...)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, this is only happening if the program is opened full screen directly in the monitor, not in the laptop screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One solution I found when this happens is to move the program to the primary screen (Cmd + Shift + Left Arrow) and then move it again to the monitor (Cmd + Shift + Right Arrow). This way, it shows correctly on the secondary screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas why is this happening? Is there some fix for it?&lt;/p&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2019-07-15T08:45:51.503" Title="Secondary screen gets locked when a full screen program opens on it" Tags="|release-juno|display|" AnswerCount="1" CommentCount="0" ClosedDate="2019-07-16T13:52:55.780" ContentLicense="CC BY-SA 4.0" />
  <row Id="19344" PostTypeId="1" CreationDate="2019-07-12T11:07:27.380" Score="2" ViewCount="485" Body="&lt;p&gt;Are there any plans in adding support for Nextcloud as online account? And/or what's the current state? How to help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would love to be able to sync contacts, calendars, tasks and files via Nextcloud by simply configuring an online account in Pantheon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thinking of something similar to GNOME online accounts:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oQuqm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oQuqm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5133" LastActivityDate="2019-09-18T19:01:30.153" Title="Nextcloud Online Acocunt?" Tags="|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19345" PostTypeId="2" ParentId="18076" CreationDate="2019-07-12T13:06:22.910" Score="0" Body="&lt;p&gt;I couldn't do column selection using Alt+Ctrl+&quot;arrow up&quot;/&quot;Arrow down&quot;. Seems to be the keyboard selection in System Settings, Keyboard, &quot;Switch Layout:&quot;. I am a European citizen, using &quot;Euro on Five&quot;. Switching keyboard layouts is by default defined as Shift+Alt. In Geany this keyboard combination is defined as column selection. Using Shift+Alt changed the keyboard selection in stead of doing column selection.&#xA;I changed it into Left-Shift + Right-Shift. Now I can perform column selection in Geany. Maybe this helps you solve the issue.&lt;/p&gt;&#xA;" OwnerUserId="18540" LastActivityDate="2019-07-12T13:06:22.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19346" PostTypeId="1" CreationDate="2019-07-12T13:47:23.310" Score="3" ViewCount="111" Body="&lt;p&gt;So Elementary OS Juno is suspending while working, playing on youtube or watching some movie online, playing radio, etc. Is there any way to bypass this but not to disable suspend in power settings? &#xA;Baisicly i dont want for OS to suspend while working and while is not working I want him to do that... Did anyone found a solution without turning off in battery settings?&lt;/p&gt;&#xA;" OwnerUserId="18541" LastActivityDate="2024-01-30T00:03:35.467" Title="EOS Juno suspends while working" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19347" PostTypeId="2" ParentId="14102" CreationDate="2019-07-12T16:25:13.080" Score="1" Body="&lt;p&gt;I solved this -for Ardour files in my case- adding a &lt;code&gt;%U&lt;/code&gt; to the &lt;code&gt;Exec&lt;/code&gt; element in &lt;code&gt;~/.local/share/applications/ardour.desktop&lt;/code&gt;. As soon as I added the option to the command the application showed up in the Pantheon Files applications list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know if this file is here because I installed Ardour from source or if this is where the shortcut is placed, but I'm sure this also works for shortcuts in &lt;code&gt;/usr/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerUserId="4486" LastActivityDate="2019-07-12T16:25:13.080" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19349" PostTypeId="2" ParentId="17371" CreationDate="2019-07-12T23:31:15.460" Score="-1" Body="&lt;p&gt;you can basically install Linux on any laptop, but be advised you need to work around the uefi secure bios.  &lt;/p&gt;&#xA;" OwnerUserId="18545" LastActivityDate="2019-07-12T23:31:15.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19352" PostTypeId="2" ParentId="12930" CreationDate="2019-07-14T16:45:59.743" Score="2" Body="&lt;p&gt;Place the &lt;a href=&quot;https://github.com/theJaxon/elementaryOS/blob/master/open-in-tilix.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;script&lt;/a&gt; in 'usr/share/applications', now it should be listed in 'open in &gt; Other Application..' in the context menu, if not then restart and check if it appears, here's a screenshot after placing the script in the correct location.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CPJ8c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CPJ8c.png&quot; alt=&quot;tilix appearing in elementary os context menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18551" LastActivityDate="2019-07-14T16:45:59.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19353" PostTypeId="2" ParentId="19319" CreationDate="2019-07-15T08:27:34.787" Score="0" Body="&lt;p&gt;Finding a really good epub reader is a problem. I have loads of epub documents and I read them on 3 different platforms (Elementary/U18, SailfishOS &amp;amp; ReMarkable) and all three have apps which render the epub docs differently. If it is just text then all is fine, but throw in diagrams, illustrations, different chapter styles etc and things go awry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently on Elementary, I have installed &lt;a href=&quot;https://github.com/babluboy/bookworm&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bookworm&lt;/a&gt; and &lt;a href=&quot;https://fbreader.org/content/fbreader-beta-linux-desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;FBReader&lt;/a&gt;; FBReader is the epub app for SailfishOS as well. I have, at times, had Calibre installed but it is so big and, in my opinion, ungainly, that I have removed it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like Bookworm the most - it is the most elegant solution so far - but it is not the best for rendering. As I'm currently proofing a book for one of the better tech publishers, I make sure that if I read it in Bookworm, I also check it out either in pdf form or on a different device!&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2019-07-15T08:27:34.787" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19354" PostTypeId="2" ParentId="19342" CreationDate="2019-07-15T08:45:51.503" Score="2" Body="&lt;p&gt;This has been recently fixed: &lt;a href=&quot;https://github.com/elementary/gala/issues/404&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/404&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Waiting for the fix update :)&lt;/p&gt;&#xA;" OwnerUserId="4717" LastActivityDate="2019-07-15T08:45:51.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19357" PostTypeId="1" CreationDate="2019-07-16T05:16:29.720" Score="1" ViewCount="508" Body="&lt;p&gt;-elementary os Loki worked fine until I upgraded my gpu from geforce 310 to gtx 1650. (I dual boot with windows 10 on separate drives.) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;-I decided to wipe loki and install juno but the display problem persists. The display problems seem related to nvidia drivers I believe. They are not available in the app center. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;-I tried to install nvidia drivers through terminal, but I got a black screen that flickered intermittently. I wiped and reinstalled juno and am stuck with just one of my 2 monitors working at 640x480.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-I get unknown display and display properties will not open in system settings.&lt;/p&gt;&#xA;" OwnerUserId="18555" LastActivityDate="2019-07-16T13:55:58.983" Title="Juno fresh install, display unknown, resolution only 640x480, GPU is Nvidia GeForce GTX 1650, display properties will not open" Tags="|display|drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19358" PostTypeId="2" ParentId="19357" CreationDate="2019-07-16T07:21:56.930" Score="2" Body="&lt;p&gt;I got it fixed! Special thanks to fosslinux.com for his article here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.fosslinux.com/1462/how-to-install-nvidia-gpu-drivers-in-elementary-os.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fosslinux.com/1462/how-to-install-nvidia-gpu-drivers-in-elementary-os.htm&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;He wrote it for Loki but it worked great for me with Juno!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is foslinux.com's instructions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;STEP 1: Starting from Loki, elementary OS doesn’t support PPA. So let’s first enable it.  Launch ‘Terminal’ and run the following commands one at a time:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;STEP 2: This command will enable PPA and you can use apt-get again in elementary OS.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;STEP 3: Let’s install video graphic sources.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;STEP 4: Update again.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;STEP 5: Finally you need to know which nvidia drivers should you install. You can check the latest PPA graphic builds here. Current official (Feb 2017) release is nvidia-370 (370.28). GeForce 8 and 9 series GPUs users need to use ‘nvidia-340’ (340.98) and GeForce 6 and 7 series GPUs users should be using ‘nvidia-304’ (304.132) in the command below. Use 3 digit number accordingly.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install nvidia-xxx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18555" LastEditorUserId="16827" LastEditDate="2019-07-16T13:55:58.983" LastActivityDate="2019-07-16T13:55:58.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19360" PostTypeId="1" CreationDate="2019-07-16T13:08:55.097" Score="0" ViewCount="156" Body="&lt;p&gt;my webcam has stopped working. I use Elementary Juno in Lenovo Yoga 510 and the message is that no supported camera was found.&#xA;However, when I open Skype the webcam works normally.&#xA;How do I proceed?&lt;/p&gt;&#xA;" OwnerUserId="18561" LastActivityDate="2019-07-23T11:44:13.393" Title="Camera stop working on Lenovo Yoga 510" Tags="|release-juno|camera|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19361" PostTypeId="1" CreationDate="2019-07-16T14:46:25.473" Score="0" ViewCount="52" Body="&lt;p&gt;all&#xA;Have new PC with  ssd 970 EVO Plus&#xA;Board is ASUS Prime B45M-A with integrated Graphics &#xA;Install with usb stick Juno 5.0 provides the setup screen with options&#xA;F1-F5  have set nomodeset.&#xA;Install provides only blank screen. &#xA;It must be something with the graphics .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any help is appreciated, thank you&lt;/p&gt;&#xA;" OwnerUserId="18564" LastActivityDate="2019-07-19T14:03:30.270" Title="juno 5.0 install on ssd black screen" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19362" PostTypeId="2" ParentId="11933" CreationDate="2019-07-16T15:02:09.703" Score="0" Body="&lt;p&gt;This feature is added to pantheon-terminal version 5.3.6+. &lt;br&gt;&#xA;Please update your system &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2019-12-03T12:46:04.503" LastActivityDate="2019-12-03T12:46:04.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19366" PostTypeId="2" ParentId="13969" CreationDate="2019-07-18T03:22:57.387" Score="0" Body="&lt;p&gt;I have Elementary OS Juno (All updates 2019), installed VMware workstation 15 and i had the same problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just installed VMware Player 15 (&lt;code&gt;VMware-Player-15.1.0-13591040.x86_64.bundle&lt;/code&gt;&#xA;) and using this command (simakwm) works fine: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GTK_CSD=0 vmplayer&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="18553" LastActivityDate="2019-07-18T03:22:57.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19368" PostTypeId="1" CreationDate="2019-07-18T18:16:31.127" Score="1" ViewCount="27" Body="&lt;p&gt;Several days ago install driconf or 3d acceleration as they prefer to call it, but when it starts I get an error and it starts in expert mode and I can not do anything, I have already installed all the drivers both private and free and remains the same&#xA;I have a compaq cq57&lt;a href=&quot;https://i.stack.imgur.com/tS8HN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tS8HN.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18580" LastActivityDate="2019-07-18T18:16:31.127" Title="Driconf error starts in expert mode" Tags="|release-juno|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19369" PostTypeId="1" CreationDate="2019-07-19T13:07:46.503" Score="2" ViewCount="286" Body="&lt;p&gt;I've just upgraded to Juno, and have noticed that I'm missing the Desktop setting in System Settings. I found this as a result of looking for why I can't right-click the desktop. It's just not there. &lt;a href=&quot;https://i.stack.imgur.com/2tp9z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2tp9z.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18571" LastActivityDate="2019-07-19T14:10:09.187" Title="Desktop System Setting missing" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19370" PostTypeId="2" ParentId="19361" CreationDate="2019-07-19T14:03:30.270" Score="-1" Body="&lt;p&gt;You can install Juno!&#xA;set parameters  : remove !!!!! quiet&#xA;add nomodeset!!!&lt;/p&gt;&#xA;" OwnerUserId="18586" LastActivityDate="2019-07-19T14:03:30.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19371" PostTypeId="2" ParentId="19369" CreationDate="2019-07-19T14:10:09.187" Score="4" Body="&lt;p&gt;As it turns out, switchboard-plug-pantheon-shell wasn't installed for some reason.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-pantheon-shell&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Solved the problem.&lt;/p&gt;&#xA;" OwnerUserId="18571" LastActivityDate="2019-07-19T14:10:09.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19372" PostTypeId="1" CreationDate="2019-07-20T06:38:28.087" Score="0" ViewCount="209" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qLaxx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qLaxx.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&#xA;'Failed to fetch updates' shows up when I open AppCenter. Can someone tell me how to stop this?&lt;/p&gt;&#xA;" OwnerUserId="18588" LastActivityDate="2019-07-20T17:53:04.790" Title="'Failed to fetch updates' shows up when I open AppCenter" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19373" PostTypeId="2" ParentId="19372" CreationDate="2019-07-20T09:38:47.870" Score="1" Body="&lt;p&gt;The small black window in the center of your screenshot indicates that you must have manually added at least one non-system repository, which doesn't have proper release file, suitable for your current system (apparently, Ubuntu 18.04 if you're on elementary OS 5). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To solve this issue, you should remove that particular PPA from your system: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Right click on &lt;strong&gt;Files&lt;/strong&gt; and select &lt;strong&gt;New Window as Administrator&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; folder.&lt;/li&gt;&#xA;&lt;li&gt;Inside that folder, delete all files that contain &lt;code&gt;sarimkhan&lt;/code&gt; in their names.&lt;/li&gt;&#xA;&lt;li&gt;Then try running an update via AppCenter. &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;In case of more errors (the messages that begin with &lt;code&gt;E:&lt;/code&gt;) post them here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;#&lt;/strong&gt; Or please execute this command bellow in terminal to remove that repository,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r &quot;deb http://download.opensuse.org/repositories/home:/sarimkhan/xUbuntu_14.04/ ./&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="16827" LastEditDate="2019-07-20T17:53:04.790" LastActivityDate="2019-07-20T17:53:04.790" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19374" PostTypeId="1" CreationDate="2019-07-20T12:49:36.180" Score="1" ViewCount="357" Body="&lt;p&gt;Basically, I’m unable to use switchboard-plug-sound despite showing up in the switchboard, despite being installed, despite still working and having it's indicators. Once I click on it from the settings, It instant close itself.&#xA;Due to that, I’m currently using the pulseaudio audio mixer, but it's pretty bad for me to use it instead of the default Elementary OS one. Anyway to fix that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suppose it's mostly due to some packages issues, but i’ve tried to reinstall it and its dependencies.&#xA;I also suspect being caused by some modifications done to the tray packages to allow for the usage of indicators once again, but i’ve didn’t have any issues since now with it.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I want to clarify, despite it close instantly, You can actually distinguish the menu actually loading, proving it isn’t just missing on the switchboard menu.&lt;/p&gt;&#xA;" OwnerUserId="18590" LastEditorUserId="16827" LastEditDate="2019-07-26T17:36:57.937" LastActivityDate="2019-07-26T17:36:57.937" Title="Can´t access the default switchboard sound settings" Tags="|wingpanel|sound|indicator-sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19375" PostTypeId="1" CreationDate="2019-07-20T13:09:20.190" Score="0" ViewCount="174" Body="&lt;p&gt;to whom it may concern,&#xA;my mail has been asking to authenticate every time and I do but it wont let me in even with the correct password.&#xA;it works on my phone but not my laptop.&#xA;what do i need to do please?&#xA;thank you in advance&#xA;Christina Smith&#xA;phone since I can't get into my email 1-619-832-6756&lt;/p&gt;&#xA;" OwnerUserId="18591" LastActivityDate="2021-08-09T09:56:17.617" Title="can't get into my mail even with right password" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19376" PostTypeId="1" CreationDate="2019-07-20T17:22:02.590" Score="0" ViewCount="132" Body="&lt;p&gt;I can not update because the person who set up my PC is out of the country and he didn't give ,me the &quot;Authentication&quot; password&lt;/p&gt;&#xA;" OwnerUserId="18595" LastEditorUserId="16827" LastEditDate="2019-07-26T17:34:48.017" LastActivityDate="2019-07-26T17:34:48.017" Title="How to reset lost administrative password?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19377" PostTypeId="1" AcceptedAnswerId="19466" CreationDate="2019-07-20T17:34:01.327" Score="1" ViewCount="157" Body="&lt;p&gt;So I recently installed eOS with LVM checked at boot to use the whole disk. I've never had an issue on previous devices, but this one seems to be a bit less than happy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;systemd-analyze&lt;/code&gt; immediately makes it clear that this is not a userspace issue, as that is all handled incredibly quickly:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 35.868s (kernel) + 5.333s (userspace) = 41.201s&#xA;graphical.target reached after 2.118s in userspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On checking &lt;code&gt;dmesg&lt;/code&gt; I find a rather suspect output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    4.633861] Btrfs loaded, crc32c=crc32c-intel&#xA;[   35.740814] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems to me that there is some issue with mounting the root partition, although my knowledge stops short of being able to diagnose why this is happening, or resolving the issue in any way.&#xA;I have heard that LVM can occasionally cause issues on some SSDs, which I suspect may well be the issue here, but I would rather avoid having to drop LVM if at all possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas where I might start looking?&lt;/p&gt;&#xA;" OwnerUserId="18594" LastEditorUserId="18594" LastEditDate="2019-08-04T09:59:42.713" LastActivityDate="2019-08-04T10:25:53.657" Title="Slow boot with LVM on Juno" Tags="|release-juno|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19379" PostTypeId="2" ParentId="19376" CreationDate="2019-07-20T20:13:45.267" Score="3" Body="&lt;p&gt;If you don't know your Administrative password and need to perform a system update/upgrade, you may want to reset it. You can read about how to do it &lt;a href=&quot;https://askubuntu.com/questions/24006/how-do-i-reset-a-lost-administrative-password&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-20T20:13:45.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19380" PostTypeId="2" ParentId="19375" CreationDate="2019-07-20T20:43:42.903" Score="0" Body="&lt;p&gt;This may be due to security level of your email app not being considered high enough by your email provider (such as Gmail). If that is the case, you may want to try to solve this issue using the strategies described &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3127/geary-mail-is-not-logging-in-my-gmail-account&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-20T20:43:42.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19381" PostTypeId="2" ParentId="19374" CreationDate="2019-07-20T23:17:12.430" Score="1" Body="&lt;p&gt;Try downloading the switchboard sound application from github. Follow directions in readme file. All dependencies are required.&lt;/p&gt;&#xA;" OwnerUserId="18597" LastActivityDate="2019-07-20T23:17:12.430" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19383" PostTypeId="1" CreationDate="2019-07-21T09:45:07.297" Score="0" ViewCount="180" Body="&lt;p&gt;I tried changing the power settings to never turn off the display system is inactive, but it still seems to shut down in some time. Except for the power button option, all other settings are set to &quot;Do Nothing&quot;. &#xA;Can someone please help me here? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w2kMT.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w2kMT.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18600" LastActivityDate="2019-07-21T09:45:07.297" Title="Elementary OS Juno - System keeps shutting down, even after changing power settings!" Tags="|release-juno|suspend|shutdown|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19384" PostTypeId="1" CreationDate="2019-07-21T19:41:26.643" Score="0" ViewCount="34" Body="&lt;p&gt;Just testing a Danish install of Juno for my dad, and perhaps my self again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I connected mail to his hotmail account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can compose new message and forward old mails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is, I cannot reply to any mails. Reply and reply-all buttons are 'grayed out', and CTRL+R doesn't work either?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What information can I provide you with, that will be helpful?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="18603" LastActivityDate="2019-07-24T07:16:31.613" Title="Reply button or CTRL+R not active" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ClosedDate="2019-07-26T17:41:46.503" ContentLicense="CC BY-SA 4.0" />
  <row Id="19385" PostTypeId="1" CreationDate="2019-07-22T07:17:52.337" Score="1" ViewCount="303" Body="&lt;p&gt;I have tried several times to install Juno on a Surface PRO 4 Tablet, most things work great only cam and touch doesn't work, but touch is essential. I have tried to install 'jakeday patch' but the touch only works for a moment then it died.&#xA;Would be great if there's a better SP4 device support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings Mark&lt;/p&gt;&#xA;" OwnerUserId="18607" LastActivityDate="2019-07-22T07:17:52.337" Title="Surface PRO 4 Support?" Tags="|touchscreen|surface-tablet|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19386" PostTypeId="1" CreationDate="2019-07-22T13:48:44.637" Score="1" ViewCount="147" Body="&lt;p&gt;I set to 1) system } keboard } insert to korea+english 2) korea selected } layout change: shift+CapsLock 3) enghlist selected } layout change: shift+CapsLock&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i want to language change at press shift+capsLock. but, my computer is only english. How do I set it up?&lt;/p&gt;&#xA;" OwnerUserId="18609" LastEditorUserId="17985" LastEditDate="2019-07-26T17:30:58.850" LastActivityDate="2019-07-26T17:30:58.850" Title="How to install two keyboard layouts (Korean/English) and switch between them?" Tags="|keyboard|language|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19387" PostTypeId="1" AcceptedAnswerId="19388" CreationDate="2019-07-22T16:25:00.683" Score="1" ViewCount="252" Body="&lt;p&gt;I have tried to connect my gmail account to the Mail app and Google calendars to the Calendar app. In both cases the authentication is failing. I've triple checked that the credentials I am entering are correct. &lt;/p&gt;&#xA;" OwnerUserId="18611" LastActivityDate="2019-08-09T05:32:07.287" Title="How do I connect my apps to Google?" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19388" PostTypeId="2" ParentId="19387" CreationDate="2019-07-22T16:34:23.170" Score="3" Body="&lt;p&gt;Because the apps don't currently support OAUTH (a requirement by Google), you have to tell Google to allow &quot;less secure&quot; apps ( &lt;a href=&quot;https://support.google.com/accounts/answer/6010255?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/accounts/answer/6010255?hl=en&lt;/a&gt; ). Or you can wait for the next release of the &quot;Online Accounts&quot; panel: &lt;a href=&quot;https://i.stack.imgur.com/8GRO3.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/8GRO3.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should have an email in your gmail inbox that says as much. :)&lt;/p&gt;&#xA;" OwnerUserId="18571" LastActivityDate="2019-07-22T16:34:23.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19389" PostTypeId="2" ParentId="19386" CreationDate="2019-07-22T18:45:50.213" Score="1" Body="&lt;p&gt;&lt;code&gt;Shift+ Caps Lock&lt;/code&gt; shortcut does work well if you set it to switch your keyboard layouts, I checked on that. However, to be able to actually type with Korean  characters instead of Latin ones, in addition to Korean keyboard layout you have to install &lt;strong&gt;additional input method&lt;/strong&gt; (Korean Hangul). On how to do that in Ubuntu-based OS, please refer to &lt;a href=&quot;https://askubuntu.com/questions/456133/unable-to-type-in-korean&quot;&gt;this page&lt;/a&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In elementary OS you can also access this feature via the &lt;code&gt;Input Method Settings...&lt;/code&gt; button in the bottom right corner of the &lt;code&gt;System Settings &amp;gt; Keyboard&lt;/code&gt; panel.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-22T18:45:50.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19390" PostTypeId="1" CreationDate="2019-07-22T20:45:45.847" Score="0" ViewCount="44" Body="&lt;p&gt;since few days i have some strange graphical glitch for notification bubbles from all application. Someone have the same problem? Some advice to how to fix it? &#xA;Tnx. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nVQlu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nVQlu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18612" LastActivityDate="2019-07-22T20:45:45.847" Title="Graphical glitch for notification bubbles" Tags="|release-juno|graphics|notification-badge|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19391" PostTypeId="1" AcceptedAnswerId="19400" CreationDate="2019-07-23T01:25:22.367" Score="1" ViewCount="188" Body="&lt;p&gt;I am trying to install the Elementary OS, the installation was succeeded, but when I reboot the system, it stuck at a black screen with blinking dash on the left corner.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing I noticed was when booting I saw a line saying &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mmc0: Unknown controller version (3). You may experience problems&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wasn't able to catch all information because it immediately turn to the option for installing the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure if it is a problem of compatibility for the hardware or not because I have the same problem when installing Debian. I am using a Hades Canyon with&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Intel Core i7-8809G&#xA;Radeon RX Vega M GH&#xA;SAMSUNG 970 M.2 storage&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to installed the Fedora, and OpenSUSE, they are both fine with my computer. But Elementary OS looks much attractive to me. Thanks&lt;/p&gt;&#xA;" OwnerUserId="18606" LastEditorUserId="17985" LastEditDate="2019-07-23T12:30:36.240" LastActivityDate="2019-07-24T02:47:57.140" Title="Black screen after installing elementary OS 5 on a Hades Canyon PC" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19392" PostTypeId="2" ParentId="19340" CreationDate="2019-07-23T04:59:42.137" Score="0" Body="&lt;p&gt;Something about it here. Translator needed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://entornosgnulinux.com/2019/01/20/autohide-en-wingpanel-para-elementary-os-juno/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://entornosgnulinux.com/2019/01/20/autohide-en-wingpanel-para-elementary-os-juno/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18597" LastActivityDate="2019-07-23T04:59:42.137" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19393" PostTypeId="2" ParentId="19340" CreationDate="2019-07-23T07:18:47.740" Score="1" Body="&lt;h2&gt;Wingpanel Autohide Script by &lt;a href=&quot;https://launchpad.net/~yunnxx/+archive/ubuntu/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Yunn&lt;/a&gt; (works in elementary OS Juno)&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To allow installing the script from PPA:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To install the script:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:yunnxx/elementary&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install elementary-wingautohide&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To autostart the script:&lt;/strong&gt;&#xA;go to &lt;code&gt;System Settings &amp;gt; Applications &amp;gt; Startup&lt;/code&gt;, click &lt;code&gt;Add Autostart App...&lt;/code&gt; button in the bottom-left corner and paste this command into the &lt;code&gt;Type in a custom command&lt;/code&gt; field:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sh /usr/bin/wingautohide.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To uninstall the script:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge elementary-wingautohide&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-07-28T04:14:14.883" LastActivityDate="2019-07-28T04:14:14.883" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19394" PostTypeId="2" ParentId="19391" CreationDate="2019-07-23T08:30:34.890" Score="1" Body="&lt;p&gt;According to &lt;a href=&quot;https://askubuntu.com/questions/1040440/graphics-drivers-for-intel-nuc-hades-canyon-nuc8i7hvk-amd-radeon-rx-vega-gh&quot;&gt;this thread&lt;/a&gt;, the blank screen issue in your case probably must have been due to the lack of Hades Canyon's innovative hardware support by Ubuntu 18.04; its current kernel doesn't include patches for Vega M Radeon (and elementary OS 5 is Ubuntu-18.04-based). If Fedora (a RedHat upstream) and OpenSUSE work fine with your hardware, it means they already have proper support for your hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Some workarounds for this issue were mentioned in the linked thread though.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-23T08:30:34.890" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19398" PostTypeId="1" AcceptedAnswerId="19404" CreationDate="2019-07-23T18:44:46.093" Score="0" ViewCount="39" Body="&lt;p&gt;My HP EliteBook laptop and Cannon MX922 are on the same wireless network but I cannot connect to printer. It works with all my other devices so it is specific to this OS. Thank you&lt;/p&gt;&#xA;" OwnerUserId="18615" LastActivityDate="2019-07-24T12:10:20.160" Title="Cannot find printer on WAN" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19399" PostTypeId="1" CreationDate="2019-07-23T22:15:55.460" Score="2" ViewCount="69" Body="&lt;p&gt;In Mac OSX this is &lt;kbd&gt;alt&lt;/kbd&gt; + &lt;kbd&gt;~&lt;/kbd&gt;&lt;br&gt;&#xA;Is there an equivalent for Elementary? I didn't see it as an option in the key&lt;/p&gt;&#xA;" OwnerUserId="18611" LastEditorUserId="18392" LastEditDate="2019-12-24T07:46:44.250" LastActivityDate="2019-12-24T07:46:44.250" Title="Is there a keyboard shortcut for cycling through windows of the same application?" Tags="|release-juno|keyboard-shortcuts|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19400" PostTypeId="2" ParentId="19391" CreationDate="2019-07-24T02:47:57.140" Score="1" Body="&lt;p&gt;I too have a Hades Canyon and had the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.intel.com/content/www/us/en/support/articles/000030985/mini-pcs.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.intel.com/content/www/us/en/support/articles/000030985/mini-pcs.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter the BIOS.&#xA;Select Advanced.&#xA;Select Performance.&#xA;Select Graphics.&#xA;Disable Intel iGD in the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="18617" LastActivityDate="2019-07-24T02:47:57.140" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19401" PostTypeId="2" ParentId="19399" CreationDate="2019-07-24T06:46:25.773" Score="0" Body="&lt;p&gt;Afaik, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4844/how-does-one-cycle-through-windows-of-the-same-application&quot;&gt;there isn't&lt;/a&gt; a keyboard shortcut for that, presumably because of how workspaces are implemented. &lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-24T06:46:25.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19402" PostTypeId="2" ParentId="19384" CreationDate="2019-07-24T07:16:31.613" Score="1" Body="&lt;p&gt;This issue has already been &lt;a href=&quot;https://github.com/elementary/mail/issues/398&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported&lt;/a&gt; to the eOS devs. However, you may want to provide your details there too.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-24T07:16:31.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19403" PostTypeId="1" CreationDate="2019-07-24T08:27:08.270" Score="0" ViewCount="47" Body="&lt;p&gt;I just tried to install eOS on my Surface Pro 4. I selected encryption for the installation, and know my password. However, when I try to complete the installation I am not able to type anything. The TypeCover keyboard doesn't seem to work here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It does work when I enter the Surface UEFI system configuration, however.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do I do? Help, please!&lt;/p&gt;&#xA;" OwnerUserId="18620" LastEditorUserId="18620" LastEditDate="2019-07-24T08:59:19.493" LastActivityDate="2019-08-26T13:01:25.160" Title="Cannot complete installation on Surface Pro 4 as TypeCover isn't working for encrypted password" Tags="|system-installation|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19404" PostTypeId="2" ParentId="19398" CreationDate="2019-07-24T12:10:20.160" Score="0" Body="&lt;p&gt;Have you installed the linux driver from manufacturer page? &lt;a href=&quot;http://pdisp01.c-wss.com/gdl/WWUFORedirectTarget.do?id=MDEwMDAwNTE3MDAx&amp;amp;cmp=ABR&amp;amp;lang=EN&quot; rel=&quot;nofollow noreferrer&quot;&gt;MX922 Driver Linux Deb&lt;/a&gt;&#xA;During the installation process you can setup the WLAN settings of the printer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: For installation you may need to install a deb-package manager first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PPS: This should be a comment, but I do not have enough reputations&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-07-24T12:10:20.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19406" PostTypeId="1" CreationDate="2019-07-24T17:45:18.503" Score="0" ViewCount="27" Body="&lt;p&gt;I recently switched from Windows to Elementary OS and i found that my speaker doesn't work like it did when i was using Windows. I don't think their is any hardware problem because it worked fine in Windows. Please Help.&lt;/p&gt;&#xA;" OwnerUserId="18621" LastActivityDate="2019-07-24T17:45:18.503" Title="Speaker not working to full potential while using Elementary OS like it did when i used Windows" Tags="|release-juno|ubuntu|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19407" PostTypeId="1" CreationDate="2019-07-24T19:16:11.043" Score="0" ViewCount="246" Body="&lt;p&gt;I'm new to Linux and just got an HP 17z laptop I put elementary on. It seems to be a common problem that once it's installed, the wifi goes out. I can't seem to find a fix that works, especially since I don't have a way to connect the laptop to the internet (no home internet or Ethernet cable). I do have access to my work computers with internet tho so I can put any drivers on a USB and get it on my computer that way, but I'm struggling to find out which drivers I need and what to do with them once I get them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From what I can tell, this seems to be relevant info:&#xA;RTL8821CE 802.11ac PCIe wireless network adapter: [10ec:c821]&#xA;Subsystem: HP RTL8821CE 802.11ac PCIe Wireless network adapter: [103c:831a]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know what other info I need to give. (Also, first post, so please tell me if I did anything wrong)&lt;/p&gt;&#xA;" OwnerUserId="18622" LastActivityDate="2023-12-12T11:08:00.957" Title="No wifi or Bluetooth on HP 17z laptop" Tags="|wifi|bluetooth|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19408" PostTypeId="1" AcceptedAnswerId="19413" CreationDate="2019-07-24T22:31:32.777" Score="1" ViewCount="1589" Body="&lt;p&gt;I need to connect to the internet via wifi connection with firefox while maintaining ethernet connection to another router via second separate firefox setup installed with snap. How do i do such a juggling?&lt;/p&gt;&#xA;" OwnerUserId="18624" LastActivityDate="2019-07-25T18:10:18.840" Title="Running two browsers with separate network interfaces" Tags="|wifi|applications|networking|firefox|ethernet|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19410" PostTypeId="2" ParentId="19408" CreationDate="2019-07-25T09:02:39.410" Score="1" Body="&lt;p&gt;Personally, i have achieved something like that. I used my laptop to pick up the wifi. Then, used the ethernet on the laptop to run to my xp desktop. the trick to it is one of the wifi connections has to be shared if i can remember right its the ethernet port. This can all be done by &#xA;-clicking the wifi symbol&#xA;-networks settings&#xA;-then at the bottom there's a tab edit connections then&lt;br&gt;&#xA;-under ipv4 tab,set the ipv4 to shared with other computers&#xA;-under ipv6 tab, set the ipv6 to disabled&#xA;-make sure your link negotiation is on automatic&#xA;- top two boxes under the general tab are checked &#xA;- and it may not be wise but i also had all the boxes under the tab dcb unchecked Then again i may be wrong. It may take some tinkering. also, if you are talking about using one computer and two connections separately, i would think a vm would be the only way to seperate the two incoming connections in to different browsers. &lt;/p&gt;&#xA;" OwnerUserId="18628" LastActivityDate="2019-07-25T09:02:39.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19412" PostTypeId="1" CreationDate="2019-07-25T13:47:27.697" Score="0" ViewCount="94" Body="&lt;p&gt;When I hover the mouse on the icons at the dock, they remain static.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, I remember there was an animation like Apple's OS;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there something that I can do to repair it? Or I'm making a mistake and there isn't anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks so much!&lt;/p&gt;&#xA;" OwnerUserId="18630" LastActivityDate="2019-07-26T05:17:45.180" Title="My dock icon's animation is gone, what can I do to repair it?" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19413" PostTypeId="2" ParentId="19408" CreationDate="2019-07-25T18:10:18.840" Score="1" Body="&lt;p&gt;I don't think you can do this within Firefox. If you do a 'firefox --help' on the command line there is no switch to specify a specific network interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could work around that by creating a local proxy for one of the interfaces and use a custom profile for that one instance of Firefox and point it at the your new local proxy inside the profile.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Something like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ firefox --profile  --new-instance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or something along those lines - you'll have to play with it to make it work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HTH&lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2019-07-25T18:10:18.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19414" PostTypeId="1" CreationDate="2019-07-25T18:17:34.193" Score="1" ViewCount="1408" Body="&lt;p&gt;I have an Ideapad320 with i5 8th gen + Geforce MX150 and I wanna know if elementaryOS runs in this hardware.&lt;/p&gt;&#xA;" OwnerUserId="18631" LastActivityDate="2023-12-15T01:08:30.980" Title="Does elementaryOS works with hybrid graphics?" Tags="|graphics|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19415" PostTypeId="2" ParentId="19374" CreationDate="2019-07-25T18:51:23.367" Score="1" Body="&lt;p&gt;This issue has since been fixed. It was due to the gnome-alsamixer being installed.&#xA;Removing it simply fixed this issue/&lt;/p&gt;&#xA;" OwnerUserId="18590" LastActivityDate="2019-07-25T18:51:23.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19417" PostTypeId="2" ParentId="18833" CreationDate="2019-07-25T22:01:38.513" Score="1" Body="&lt;p&gt;To solve this issue install Evolution from AppCenter and add your CalDAV there. Then the elementaryOS Calendar will start working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's an old issue.&lt;/p&gt;&#xA;" OwnerUserId="18633" LastEditorUserId="-1" LastEditDate="2019-12-07T06:38:07.797" LastActivityDate="2019-12-07T06:38:07.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19418" PostTypeId="1" CreationDate="2019-07-26T01:31:32.180" Score="0" ViewCount="21" Body="&lt;p&gt;I cannot drag and drop a file from Pantheon to Chrome. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works within Pantheon but when switching the apps, only the drag mouse symbol remains while the actual drop functionality never works.&lt;/p&gt;&#xA;" OwnerUserId="18419" LastActivityDate="2019-07-26T01:31:32.180" Title="No cross-app drag and drop functionality in Juno" Tags="|release-juno|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19419" PostTypeId="2" ParentId="19412" CreationDate="2019-07-26T05:17:45.180" Score="1" Body="&lt;p&gt;I just looked at mine and they are static, Don't remember if they have all ways been like that or not. Will keep looking for you.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-07-26T05:17:45.180" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19421" PostTypeId="1" CreationDate="2019-07-26T16:11:33.563" Score="0" ViewCount="3322" Body="&lt;p&gt;Hello I just installed Elementary OS 5.0 Juno. After the installation, from the app center I installed NVidia 3.40 and then clicked to install NVidia 390. Later I realized I can only used either 3.40 or 3.90, so I clicked to install 3.40 again, but it gave me errors and stuff.&lt;br/&gt;&#xA;Thinking it's because of the 3.90 driver installed, I click to uninstall NVidia Drive 3.90 from the app center, but nothing happens.&lt;br/&gt; &#xA;I restart my PC and when I load Elementary OS it goes black screen. So I guess I messed up something in the graphical drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use sudo apt --fix-broken install and it gives me some kind of errors I don't know how to fix.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8OWkx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8OWkx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to purge NVidia packages also. And hoping to install but I still get the errors while installing&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3KS0i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3KS0i.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18640" LastEditorUserId="18640" LastEditDate="2019-07-26T16:21:50.910" LastActivityDate="2020-12-27T09:03:40.390" Title="NVidia Drivers problems" Tags="|graphic-drivers|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19424" PostTypeId="2" ParentId="19421" CreationDate="2019-07-27T08:24:21.543" Score="0" Body="&lt;p&gt;If your elementary OS installation is fresh and hasn't been meticulously fine-tuned for many hours, I'd suggest reinstalling it; this could really be a much quicker and cleaner solution than trying to unscramble messed video driver dependencies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the clean elementary OS re-installation, I'd also suggest installing the correct driver for your video card from NVIDIA PPA instead of using the default driver that ships with the system.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;To allow installing from PPAs, execute &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;To define the correct driver version for your NVIDIA card, go &lt;a href=&quot;https://www.nvidia.com/Download/index.aspx?lang=en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;To install the driver from NVIDIA PPA, see &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19219/gpu-not-detected&quot;&gt;this answer&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-07-28T04:18:51.830" LastActivityDate="2019-07-28T04:18:51.830" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19425" PostTypeId="2" ParentId="19403" CreationDate="2019-07-27T11:03:30.630" Score="1" Body="&lt;p&gt;the only option to get through it the first time would be with another basic USB keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you get that far there has is the below workaround in 18.04 to get the on-screen keyboard to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/SurfaceLinux/comments/8kfpna/fixing_the_keyboard_for_booting_luks_full_disk/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/SurfaceLinux/comments/8kfpna/fixing_the_keyboard_for_booting_luks_full_disk/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18596" LastActivityDate="2019-07-27T11:03:30.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19426" PostTypeId="2" ParentId="17707" CreationDate="2019-07-27T16:29:51.817" Score="2" Body="&lt;p&gt;As of Epiphany 3.32 (maybe some earlier post-3.24 versions), you can &lt;a href=&quot;https://askubuntu.com/a/470041/55386&quot;&gt;edit the list of filter files using &lt;code&gt;dconf-editor&lt;/code&gt; or &lt;code&gt;gsettings&lt;/code&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, you should (haven't tested) be able to define a filter file with exceptions according to the &lt;a href=&quot;https://adblockplus.org/en/filters&quot; rel=&quot;nofollow noreferrer&quot;&gt;AdBlock Plus syntax&lt;/a&gt;, upload it somewhere, and put the link in the &lt;code&gt;adblock-filters&lt;/code&gt; setting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might even be able to get away with dropping a filter file in &lt;code&gt;~/.cache/epiphany/adblock/&lt;/code&gt; (where filters defined in &lt;code&gt;adblock-filters&lt;/code&gt; are downloaded), not sure.&lt;/p&gt;&#xA;" OwnerUserId="18646" LastActivityDate="2019-07-27T16:29:51.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19429" PostTypeId="1" AcceptedAnswerId="19431" CreationDate="2019-07-27T19:00:29.147" Score="0" ViewCount="501" Body="&lt;p&gt;I just installed Elementary OS to my laptop, it is an Alienware. When I was in the installation process, it asked which wifi it should connect and after confirming password it installed everything perfectly. After installation finished, I logged into the system and I only see Wired connection set by default. When I open &quot;Network&quot; I see Wifi is connected but &quot;never&quot; used. Can someone please help me?&lt;/p&gt;&#xA;" OwnerUserId="18648" LastActivityDate="2019-08-05T22:36:21.017" Title="I can not use my wifi connection although it is connected" Tags="|wifi|networking|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="19431" PostTypeId="2" ParentId="19429" CreationDate="2019-07-28T13:06:57.577" Score="2" Body="&lt;p&gt;OK, so as per @a-tokarev mentioned in his last comment, by installing this &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; driver i solved the issue. So, all the people out their who is struggling with Wi-Fi connection in their &lt;code&gt;Elementary OS&lt;/code&gt; distro you can follow either steps from below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution one:&lt;/strong&gt;&#xA;Go to your &lt;code&gt;AppCenter&lt;/code&gt;, click &lt;code&gt;Installed&lt;/code&gt; tab and check for &lt;code&gt;Drivers&lt;/code&gt; section. There you will find &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; driver. Click the button &lt;code&gt;Free&lt;/code&gt; on it's right &amp;amp; it will install necessary drivers to activate your Wi-Fi connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution two:&lt;/strong&gt;&#xA;Go to your &lt;code&gt;Terminal&lt;/code&gt; and copy/paste below command and press &lt;code&gt;Enter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You have to provide your &lt;code&gt;sudo&lt;/code&gt; password to install this. I hope this will be helpful enough. &lt;/p&gt;&#xA;" OwnerUserId="18648" LastActivityDate="2019-07-28T13:06:57.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19432" PostTypeId="1" CreationDate="2019-07-28T13:38:01.650" Score="0" ViewCount="136" Body="&lt;p&gt;Recently, I am using Elementary OS and i like it. I am a Mac user but i also use Windows for gaming, so UI + functionality wise it is perfect for me. I found one issue, i was trying to install &lt;code&gt;Steam&lt;/code&gt;, after the progress bar went little bit more than 50%, it was stuck for more than 5 minutes. So, i forced quit &lt;code&gt;AppCenter&lt;/code&gt; and when i went to application menu, i saw &lt;code&gt;Steam&lt;/code&gt; is there already. Same thing happened with system update, it was stuck for almost 20 minutes after 60%. Is this a bug or something is wrong from my side?&lt;/p&gt;&#xA;" OwnerUserId="18648" LastActivityDate="2019-07-28T13:38:01.650" Title="Installation never completes in AppCenter" Tags="|system-installation|software-installation|appcenter|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="19433" PostTypeId="1" CreationDate="2019-07-28T15:11:43.193" Score="0" ViewCount="48" Body="&lt;p&gt;I have installed elementary os Juno on my hp 15 notebook. But it doesn't detects wifi adaptor. It is hard blocked. Can anyone help me to solve this issue?&lt;/p&gt;&#xA;" OwnerUserId="18651" LastActivityDate="2019-07-29T11:21:54.793" Title="Wifi is not detected in elementary 5 Juno" Tags="|release-juno|elementary-website|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19434" PostTypeId="1" AcceptedAnswerId="19438" CreationDate="2019-07-28T21:37:07.500" Score="1" ViewCount="136" Body="&lt;p&gt;I made this code, but it doesn't work correctly.&#xA;The window is created, but the button does not appear. I do not receive any error reports. Would anyone know why?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public class MyApp : Gtk.Application {&#xA;&#xA;    public MyApp(){&#xA;        Object(&#xA;            application_id: &quot;com.github.cristianofmc.hello&quot;,&#xA;            flags: ApplicationFlags.FLAGS_NONE&#xA;        );&#xA;    }&#xA;&#xA;    protected override void activate () {&#xA;        var button_hello = new Gtk.Button.with_label (&quot;Click me!&quot;);&#xA;        button_hello.margin = 12;&#xA;        button_hello.clicked.connect (() =&amp;gt; {&#xA;            button_hello.label = &quot;Hello World!&quot;;&#xA;            button_hello.sensitive = false;&#xA;        });&#xA;        var main_window = new Gtk.ApplicationWindow (this);&#xA;        main_window.default_height = 300;&#xA;        main_window.default_width = 300;&#xA;        main_window.title = &quot;Hello World&quot;;&#xA;        main_window.show_all();&#xA;        main_window.add (button_hello);&#xA;    }&#xA;&#xA;    public static int main (string[] args) {&#xA;        var app = new MyApp ();&#xA;        return app.run (args);&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PYFqi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PYFqi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18654" LastEditorUserId="18654" LastEditDate="2019-07-28T21:45:54.063" LastActivityDate="2019-07-29T17:28:18.227" Title="Code don't work" Tags="|gtk|vala|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19436" PostTypeId="1" CreationDate="2019-07-29T11:41:45.230" Score="1" ViewCount="190" Body="&lt;p&gt;Has anyone managed to install &lt;a href=&quot;https://github.com/evilsocket/opensnitch&quot; rel=&quot;nofollow noreferrer&quot;&gt;OpenSnitch&lt;/a&gt; in Juno ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the install it using the procedure from the README.md, but the &quot;make&quot; command fails with the following error :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Command &quot;python setup.py egg_info&quot; failed with error code 1 in /tmp/pip-build-ji2suxci/grpcio/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you !&lt;/p&gt;&#xA;" OwnerUserId="18655" LastEditorUserId="18655" LastEditDate="2019-07-29T11:49:01.377" LastActivityDate="2020-07-29T09:08:40.880" Title="Install OpenSnitch in Juno?" Tags="|release-juno|software-installation|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19437" PostTypeId="1" CreationDate="2019-07-29T12:29:02.553" Score="0" ViewCount="102" Body="&lt;p&gt;I can access some kind of terminal when I press buttons.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me how to reset or reinstall using commands.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Better, can you tell me how to boot USB from command line? Because my bios boot options not works :/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am kinda stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is Reddit video:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/cjaghe/elementary_os_cant_boot/?utm_medium=android_app&amp;amp;utm_source=share&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/cjaghe/elementary_os_cant_boot/?utm_medium=android_app&amp;amp;utm_source=share&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18656" LastActivityDate="2019-07-29T12:29:02.553" Title="After restart Elementary OS stuck on boot logo" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19438" PostTypeId="2" ParentId="19434" CreationDate="2019-07-29T17:28:18.227" Score="1" Body="&lt;p&gt;You are showing all the window objects and then adding the button afterwards. Try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;main_window.add (button_hello);&#xA;main_window.show_all();&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13095" LastActivityDate="2019-07-29T17:28:18.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19440" PostTypeId="1" CreationDate="2019-07-30T18:27:01.460" Score="0" ViewCount="60" Body="&lt;p&gt;I try with pm-hibernate but don't work. My laptop is Asus Tuf Gaming&lt;/p&gt;&#xA;" OwnerUserId="18663" LastActivityDate="2019-07-30T21:13:34.193" Title="How enable hibernation in Elementary Juno?" Tags="|laptop|" AnswerCount="1" CommentCount="0" ClosedDate="2019-07-31T03:11:00.560" ContentLicense="CC BY-SA 4.0" />
  <row Id="19441" PostTypeId="2" ParentId="18868" CreationDate="2019-07-30T20:06:44.700" Score="1" Body="&lt;p&gt;I found the same issue when setting Firefox Developer Edition as my default browser. Then when opening the default browser using a shortcut, it opens a separate dock icon. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked in ~/.local/share/applications and found the added shortcut. It looks like it was using &lt;code&gt;firefox-bin&lt;/code&gt; as the executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you change the executable in your custom shortcut to point to &lt;code&gt;firefox-bin&lt;/code&gt; it should fix the issue. (it did for me)&lt;/p&gt;&#xA;" OwnerUserId="18666" LastActivityDate="2019-07-30T20:06:44.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19442" PostTypeId="2" ParentId="19440" CreationDate="2019-07-30T21:13:34.193" Score="0" Body="&lt;p&gt;Unfortunately, hibernation does not work in elementary OS, although there is such an option in &lt;code&gt;System Settings &amp;gt; Power&lt;/code&gt;. For details please see the answer to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17341/hibernate-option-in-juno/19321#19321&quot;&gt;this question&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-30T21:13:34.193" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19443" PostTypeId="2" ParentId="13969" CreationDate="2019-07-31T06:23:48.700" Score="1" Body="&lt;p&gt;Managed to work around it, with the help of Simakwn's response in this thread.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a map /usr/share/scripts&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a file /usr/share/scripts/Custom_VMware_WKS.sh&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter one line: &quot;GTK_CSD=0 /usr/bin/vmware %U&quot; (no quotes)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;chmod a+x the file using sudo&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install AppEditor - this app allows you to create custom launchers,&#xA;especially tailored to fit Elementary. Download it here:&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor/&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Using that, create a copy of your existing VMWare Workstation,&#xA;you do good to give it a unique name (i.e. add 'Custom' to its name)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Modify the command line so that it points to the script in point 2&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Save it, and voilà. You can now run VMware Workstation without issues.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Repeat the above steps for your VMware Player application (name it Custom_VMware_PYR.sh instead of course ;-)).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Again, kudos to simakwn for having the solution, and Aiman Ismail for pointing me to AppEditor in a separate post.&lt;/p&gt;&#xA;" OwnerUserId="18667" LastEditorUserId="18667" LastEditDate="2019-07-31T06:30:04.260" LastActivityDate="2019-07-31T06:30:04.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19444" PostTypeId="1" AcceptedAnswerId="24249" CreationDate="2019-07-31T10:50:51.250" Score="2" ViewCount="307" Body="&lt;p&gt;For example :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;io.elementary.terminal -h&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;produces the following output&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[DEBUG 21:57:54.738715] Settings.vala:163: Loading settings from schema 'io.elementary.terminal.settings'&#xA;Usage:&#xA;  io.elementary.terminal [OPTION…]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Why do I need this to work?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I have to change &quot;&lt;em&gt;Terminal to launch console program&lt;/em&gt;&quot; &lt;strong&gt;from&lt;/strong&gt; &lt;code&gt;xterm -T $TITLE -e&lt;/code&gt; &lt;strong&gt;to&lt;/strong&gt; elementary's OS (Juno) &lt;code&gt;io.elementary.terminal -e&lt;/code&gt; in &lt;em&gt;CodeBlocks&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="18040" LastActivityDate="2020-04-25T09:58:18.180" Title="Can't use options with io.elementary.terminal" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19445" PostTypeId="1" CreationDate="2019-07-31T14:57:41.617" Score="0" ViewCount="94" Body="&lt;pre&gt;&lt;code&gt;bonifacio@bonifacio-PC:~$ noise&#xA;Command 'noise' not found, but can be installed with:&#xA;sudo apt install openfoam&#xA;bonifacio@bonifacio-PC:~$ sudo apt install openfoam&#xA;[sudo] пароль для bonifacio:                  &#xA;Чтение списков пакетов… Готово&#xA;Построение дерева зависимостей       &#xA;Чтение информации о состоянии… Готово&#xA;Следующие пакеты устанавливались автоматически и больше не требуются:&#xA;  linux-headers-4.15.0-52 linux-headers-4.15.0-52-generic linux-image-4.15.0-52-generic linux-modules-4.15.0-52-generic linux-modules-extra-4.15.0-52-generic&#xA;Для их удаления используйте «sudo apt autoremove».&#xA;Следующие НОВЫЕ пакеты будут установлены:&#xA;  openfoam&#xA;Обновлено 0 пакетов, установлено 1 новых пакетов, для удаления отмечено 0 пакетов, и 0 пакетов не обновлено.&#xA;Установлено или удалено не до конца 14 пакетов.&#xA;Необходимо скачать 0 B/17,2 MB архивов.&#xA;После данной операции объём занятого дискового пространства возрастёт на 118 MB.&#xA;(Чтение базы данных … на данный момент установлено 274663 файла и каталога.)&#xA;Подготовка к распаковке …/openfoam_4.1+dfsg1-2_amd64.deb …&#xA;Распаковывается openfoam (4.1+dfsg1-2) …&#xA;dpkg: ошибка при обработке архива /var/cache/apt/archives/openfoam_4.1+dfsg1-2_amd64.deb (--unpack):&#xA; попытка перезаписать «/usr/share/man/man1/noise.1.gz», который уже имеется в пакете noise 5.0.4+r2721+pkg114~ubuntu5.0.1&#xA;dpkg-deb: ошибка: вставка subprocess was killed by signal (Обрыв канала)&#xA;При обработке следующих пакетов произошли ошибки:&#xA; /var/cache/apt/archives/openfoam_4.1+dfsg1-2_amd64.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17571" LastEditorUserId="16827" LastEditDate="2019-12-05T07:24:41.567" LastActivityDate="2019-12-05T07:24:41.567" Title="The music app noise doesn't open" Tags="|release-juno|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19446" PostTypeId="1" CreationDate="2019-07-31T15:19:38.853" Score="2" ViewCount="2501" Body="&lt;p&gt;I recently switched from Windows to Elementary OS and i have noticed several times that the keyboard as well as the touch pad stops working. If i restart my laptop, then everything seems to work fine for sometime but then again the same problem occurs. This never happened in Windows. Please help.&lt;/p&gt;&#xA;" OwnerUserId="18621" LastEditorUserId="-1" LastEditDate="2019-08-04T11:28:06.037" LastActivityDate="2021-06-10T08:09:36.957" Title="Keyboard and TouchPad stops working in Elementary OS" Tags="|release-juno|keyboard|touchpad|elementary-website|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19447" PostTypeId="2" ParentId="19445" CreationDate="2019-07-31T15:36:53.720" Score="1" Body="&lt;p&gt;&lt;code&gt;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/code&gt; indicates a package installer error. This can happen after a failed software installation, or if the installer becomes corrupted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looks like some packages have been unpacked but not installed (probably due to a connection failure). You can try to fix your dpkg database by running this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg ––configure –a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then trying to re-install the desired software.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-07-31T15:36:53.720" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19448" PostTypeId="1" CreationDate="2019-07-31T16:50:29.387" Score="0" ViewCount="59" Body="&lt;p&gt;I tried to solve problem with installing vim and changed /etc/apt/sources.list .&#xA;I'm using juno5. When I'm trying to update :&#xA;&lt;code&gt;&#xA;Err:1 http://non-us.debian.org/debian-non-US stable/non-US InRelease&#xA;Could not resolve 'non-us.debian.org'&#xA;Ign:2 http://dl.google.com/linux/chrome/deb stable InRelease&lt;br&gt;&#xA;Get:3 http://security.debian.org stable/updates InRelease [39,1 kB]&lt;br&gt;&#xA;Hit:4 http://dl.google.com/linux/chrome/deb stable Release&lt;br&gt;&#xA;Hit:5 http://repo.yandex.ru/yandex-disk/deb stable InRelease&lt;br&gt;&#xA;Hit:6 http://ppa.launchpad.net/atareao/telegram/ubuntu bionic InRelease&lt;br&gt;&#xA;Get:7 http://security.debian.org stretch/updates InRelease [94,3 kB]&lt;br&gt;&#xA;Hit:8 http://packages.elementary.io/appcenter bionic InRelease&lt;br&gt;&#xA;Hit:9 http://ppa.launchpad.net/deadsnakes/ppa/ubuntu bionic InRelease&lt;br&gt;&#xA;Err:3 http://security.debian.org stable/updates InRelease&lt;br&gt;&#xA;  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY AA8E81B4331F7F50 NO_PUBKEY 112695A0E562B32A&#xA;Hit:10 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:12 http://ppa.launchpad.net/gezakovacs/ppa/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:13 https://download.sublimetext.com apt/stable/ InRelease&lt;br&gt;&#xA;Hit:14 http://ppa.launchpad.net/git-core/ppa/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:15 http://ppa.launchpad.net/maarten-fonville/android-studio/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:16 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:17 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&lt;br&gt;&#xA;Err:7 http://security.debian.org stretch/updates InRelease&lt;br&gt;&#xA;  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9D6D8F6BC857C906 NO_PUBKEY AA8E81B4331F7F50&#xA;Hit:18 http://ppa.launchpad.net/slytomcat/ppa/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:19 http://ppa.launchpad.net/webupd8team/atom/ubuntu bionic InRelease&lt;br&gt;&#xA;Hit:20 http://ppa.launchpad.net/webupd8team/java/ubuntu bionic InRelease&lt;br&gt;&#xA;Ign:21 http://http.us.debian.org/debian stable InRelease&lt;br&gt;&#xA;Get:22 http://http.us.debian.org/debian stable Release [115 kB]&lt;br&gt;&#xA;Get:23 http://http.us.debian.org/debian stable Release.gpg [3 133 B]&#xA;Ign:23 http://http.us.debian.org/debian stable Release.gpg&#xA;Reading package lists... Done&lt;br&gt;&#xA;W: GPG error: http://security.debian.org stable/updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY AA8E81B4331F7F50 NO_PUBKEY 112695A0E562B32A&#xA;E: The repository 'http://security.debian.org stable/updates InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: GPG error: http://security.debian.org stretch/updates InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 9D6D8F6BC857C906 NO_PUBKEY AA8E81B4331F7F50&#xA;E: The repository 'http://security.debian.org stretch/updates InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: GPG error: http://http.us.debian.org/debian stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 04EE7237B7D453EC NO_PUBKEY 648ACFD622F3D138 NO_PUBKEY EF0F382A1A7B6500 NO_PUBKEY DCC9EFBF77E11517&#xA;E: The repository 'http://http.us.debian.org/debian stable Release' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&#xA;My /etc/apt/sources.list:&#xA;    `&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; deb http://non-us.debian.org/debian-non-US stable/non-US main contrib &#xA; non-free&#xA; deb http://security.debian.org stable/updates main contrib non-free&#xA;&#xA; deb-src http://http.us.debian.org/debian stable main contrib non-free&#xA; deb-src http://non-us.debian.org/debian-non-US stable/non-US main &#xA; contrib non-free&#xA; deb http://security.debian.org/ stretch/updates main contrib non-free`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18668" LastActivityDate="2019-08-07T15:04:57.313" Title="Bad /etc/apt/sources.list" Tags="|release-juno|updates|sources|" AnswerCount="0" CommentCount="2" ClosedDate="2019-08-07T15:05:25.500" ContentLicense="CC BY-SA 4.0" />
  <row Id="19449" PostTypeId="1" CreationDate="2019-07-31T18:37:32.397" Score="0" ViewCount="27" Body="&lt;p&gt;Well, i was making a c++ command line app for my game engine in arch linux. But i am on different computer now and it just can't run it. It can compile, but can't run.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://pasteboard.co/IqyLM6i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pasteboard.co/IqyLM6i.png&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;as you can see in the image, when i run my app it stucks. Normally it should be generate a key for specific reasons but it is not. Is this my mistake or a bug?&lt;/p&gt;&#xA;&lt;p&gt;I don't want to share my code but i'll share first part of program.&#xA;here is,&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/Tqvau100&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/Tqvau100&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h1&gt;1&lt;/h1&gt;&#xA;" OwnerUserId="18669" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-08-01T22:36:46.817" Title="Can't open my command line c++ app" Tags="|release-juno|pantheon-terminal|programming|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19450" PostTypeId="1" AcceptedAnswerId="19451" CreationDate="2019-08-01T01:04:10.863" Score="1" ViewCount="458" Body="&lt;p&gt;Hello I have the next problem, Im a new Linux user and I don't know what I do so my shell look so different as default one.&#xA;and the letter are kind of united, I'ved seen some similar posts but any of them worked.&#xA;also: sorry for my broken english.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/IQ8b7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IQ8b7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18670" LastEditorUserId="17985" LastEditDate="2019-08-01T17:45:06.477" LastActivityDate="2019-08-01T17:45:06.477" Title="Font in Terminal looks corrupted" Tags="|shell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19451" PostTypeId="2" ParentId="19450" CreationDate="2019-08-01T05:50:41.620" Score="2" Body="&lt;p&gt;This issue may be caused by two things: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) you have modified your system font settings and have set some proportional font (i.e. OpenSans Regular, in which different letters have different widths) as your system monospace font. Solution: install &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt;, go to &lt;code&gt;System Settings &amp;gt; Tweaks &amp;gt; Fonts&lt;/code&gt; and choose any monospace font (i.e. Roboto Mono Regular) to be your system monospace font.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) you have messed only your Terminal's font setting. To fix it in elementary OS 5, run this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gsettings set io.elementary.terminal.settings font 'RobotoMono-Regular 10'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-01T05:50:41.620" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19452" PostTypeId="2" ParentId="19449" CreationDate="2019-08-01T08:45:08.287" Score="1" Body="&lt;p&gt;Okay, first, I think that &quot;&lt;em&gt;can't run&lt;/em&gt;&quot; isn't correct, because you can run it - you can see at your screenshot, that it runs (there is no &lt;em&gt;prompt line&lt;/em&gt; after you start program) and the process is on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second, I think, that it can't be &lt;em&gt;Elementary Os&lt;/em&gt; or &lt;em&gt;Pantheon&lt;/em&gt; depended bug, so check your code carefully. You can try debuging. For example simple &lt;em&gt;cout&lt;/em&gt;-debuging. Try insert some output in the begining of the main function to be sure, that it runs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Third, I see, that it takes 100% of CPU, as htop says, and it just can be an infinite loop.&lt;/p&gt;&#xA;" OwnerUserId="17671" LastEditorUserId="17671" LastEditDate="2019-08-01T22:36:46.817" LastActivityDate="2019-08-01T22:36:46.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19453" PostTypeId="1" AcceptedAnswerId="19497" CreationDate="2019-08-01T08:55:26.790" Score="0" ViewCount="111" Body="&lt;p&gt;So, I've been using &lt;em&gt;Elementary OS&lt;/em&gt; for a long time and one day I decided to install &lt;em&gt;Gnome DE&lt;/em&gt; for variety. I started to customizing it for myself and everything was ok, until I got to &lt;em&gt;xbindkeys&lt;/em&gt;. I'm using this program in my &lt;em&gt;Pantheon DE&lt;/em&gt; (default &lt;em&gt;DE&lt;/em&gt; for &lt;em&gt;Elementary OS&lt;/em&gt;) for mapping mouse arrows as desktop switchers - it's very comfortable.&lt;/p&gt;&#xA;&lt;p&gt;So in &lt;em&gt;Gnome (Xorg)&lt;/em&gt; it works at half. In the US keyboard layout everything is good, it works very well. But when I switch to the Russian keyboard layout it just stops working. The daemon is still working, but nothing happens. I decided to run &lt;code&gt;xbindkeys -v&lt;/code&gt; to get more information. I realized that &lt;em&gt;e.xbutton.button&lt;/em&gt; is the same in all layouts, but &lt;em&gt;e.xbutton.state&lt;/em&gt; is strange in the Russian layout - 8208. I found this &lt;a href=&quot;https://askubuntu.com/questions/689410/xbindkeys-does-not-trigger-some-keys-when-keyboard-layout-changes&quot;&gt;post&lt;/a&gt;, got the patch from it, got the xbindkeys source by typing: &lt;code&gt;git clone http://git.savannah.gnu.org/cgit/xbindkeys.git&lt;/code&gt;. Git didn't want to apply the patch by &lt;code&gt;git apply -v xbindkeys_patch.patch&lt;/code&gt; – it says it can't find the wanted line. I opened the file which should be edited, and realized that it already has this fixed. Very interesting! I built it and installed it as described in the &lt;em&gt;'INSTALL'&lt;/em&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ ./configure&#xA;$ make&#xA;$ sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now the following happened: xbindkeys now received mouse button in Russian layout and switches desktops, but... it takes a second or 1.5 seconds. On the US layout everything works immediately like before.&lt;/p&gt;&#xA;&lt;p&gt;I decided to dig deeper. Using the best debugging principles (printf-debuging) I found a problem in the source code. This program uses &lt;em&gt;Xlib API&lt;/em&gt; and it calls the &lt;em&gt;XNextEvent()&lt;/em&gt; function, which takes this extreme amount of time on the Russian layout.&lt;/p&gt;&#xA;&lt;p&gt;So it happens only in &lt;em&gt;Gnome&lt;/em&gt; session. And I don't know what to do next. I would appreciate any help.&lt;/p&gt;&#xA;" OwnerUserId="17671" LastEditorUserId="84" LastEditDate="2021-07-10T09:35:45.450" LastActivityDate="2021-08-09T11:03:45.433" Title="xbindkeys not working with Russian keyboard layout on Gnome session" Tags="|gnome|keyboard-layout|xorg|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19455" PostTypeId="1" CreationDate="2019-08-01T11:57:00.587" Score="0" ViewCount="215" Body="&lt;p&gt;I'm running Juno, and I have a very large music library, about 290gb with a mixture of mp3 and flac. I really want to try the Elementary OS Music player, but scanning my library is taking an ungodly long time. It's now been scanning for about 34 hours and is only 3/4th of the way through. I don't recall having this issue with Loki.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At first I had my music library on an NTFS partition, but Noise would only scan for a little while then crash, then I read that NTFS was very slow on Linux, so I figured moving the library would solve my problem. So I copied my entire music library to an ext4 formatted USB 3 drive that is normally very fast. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Music/Noise no longer crashes when scanning, but now the scan is been going for over a full day and still not completed. Does anyone have any idea why this could possibly be taking so long? Is this a bug?&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-01T20:25:22.240" Title="Music scanning library for insanely long time" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19456" PostTypeId="2" ParentId="19192" CreationDate="2019-08-01T12:59:08.063" Score="0" Body="&lt;p&gt;This sounds like a hardware issue and not related to the Music app&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-01T12:59:08.063" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19457" PostTypeId="2" ParentId="19258" CreationDate="2019-08-01T13:02:27.570" Score="0" Body="&lt;p&gt;This is not related to the Music app, but MIDI controllers do not produce sound, they control midi software or hardware. You will need to familiarize yourself with the Jack Audio Connection Kit and Alsa Sequencer. Check youtube, there are a lot of linux audio tutorials. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-01T13:02:27.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19458" PostTypeId="2" ParentId="18828" CreationDate="2019-08-01T13:04:49.920" Score="1" Body="&lt;p&gt;Try installing pavucontrol by executing &lt;code&gt;sudo apt install pavucontrol&lt;/code&gt;on terminal. It gives you a little more control over selecting inputs and outputs and is a bit more robust than the default mixer. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastEditorUserId="16827" LastEditDate="2019-08-01T17:47:11.630" LastActivityDate="2019-08-01T17:47:11.630" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19460" PostTypeId="1" AcceptedAnswerId="19467" CreationDate="2019-08-01T13:26:12.873" Score="1" ViewCount="825" Body="&lt;p&gt;I love the Epiphany browser's look and aesthetic, but when using pages with a lot of multimedia content, it will eventually lock up, or crash. I already have gstreamer1.0-libav installed. I'm currently using Firefox, but would like to be able to use the default browser, but it currently has too many issues. Youtube plays fine, but other sites, like Musecore.org tutorials, and my school's website don't work properly. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-10-04T15:24:07.703" Title="Video and other multimedia locks up and crashes Epiphany browser" Tags="|epiphany|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19461" PostTypeId="2" ParentId="18937" CreationDate="2019-08-01T13:53:29.800" Score="2" Body="&lt;p&gt;I think this is what you want (execute in terminal)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter workspaces-only-on-primary false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Works same as on gnome since it's based on gnome.&lt;/p&gt;&#xA;" OwnerUserId="18672" LastEditorUserId="16827" LastEditDate="2019-08-01T17:49:51.210" LastActivityDate="2019-08-01T17:49:51.210" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19463" PostTypeId="2" ParentId="18937" CreationDate="2019-08-01T19:28:08.163" Score="1" Body="&lt;p&gt;If you want to extend your workspace on both monitors - System settings &gt; Displays, disable Mirror Display and you can have extended workspace on both monitors. You can modify it by dragging both monitors top/bottom/left/right in order to fit how you want the space to be arranged.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-08-01T19:28:08.163" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19464" PostTypeId="1" CreationDate="2019-08-01T19:34:35.537" Score="0" ViewCount="139" Body="&lt;p&gt;As topic. No USB drive so thought I'd try this. Have downloaded the ISO, installed using Wubi, but first boot fails with an error that recommends running chkdsk /r. Have done this and still no dice. Using most recent version of elementary and Wubi Urdu.&lt;/p&gt;&#xA;" OwnerUserId="18675" LastActivityDate="2019-08-01T19:34:35.537" Title="Can't find Ubuntu iso when using wubi_uefi to install elementary os" Tags="|install|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19465" PostTypeId="2" ParentId="19455" CreationDate="2019-08-01T20:25:22.240" Score="1" Body="&lt;p&gt;According to issues already reported by other users on the Music Github page (see &lt;a href=&quot;https://github.com/elementary/music/issues/506&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/music/issues/502&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;), slow scanning of large library files is currently quite typical to this app and probably has nothing to do with any particular filesystem.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-01T20:25:22.240" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19466" PostTypeId="2" ParentId="19377" CreationDate="2019-08-01T20:38:41.523" Score="1" Body="&lt;p&gt;I have the same problem but my loading times are even higher than yours:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 1.987s (firmware) + 25.210s (loader) + 37.081s (kernel) + 3.052s (userspace) &#xA;= 1min 7.332s graphical.target reached after 3.041s in userspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I have found a solution here:&lt;/strong&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1037457/slow-boot-with-ssd-and-lvm-on-new-install-of-18-04&quot;&gt;https://askubuntu.com/questions/1037457/slow-boot-with-ssd-and-lvm-on-new-install-of-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just use the First Method in the first reply. I'vr changed UUID to file path and used &lt;code&gt;wait_for_udev&lt;/code&gt; instead of &lt;code&gt;wait-for-root&lt;/code&gt; . &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my loading time is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 2.244s (firmware) + 2.808s (loader) + 5.160s (kernel) + 6.683s (userspace) &#xA;= 16.897s graphical.target reached after 6.670s in userspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18676" LastEditorUserId="18676" LastEditDate="2019-08-04T10:25:53.657" LastActivityDate="2019-08-04T10:25:53.657" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19467" PostTypeId="2" ParentId="19460" CreationDate="2019-08-01T23:55:25.870" Score="2" Body="&lt;p&gt;If it's crashing, then you should file a bug report &lt;a href=&quot;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&quot; rel=&quot;nofollow noreferrer&quot;&gt;with a quality backtrace&lt;/a&gt; so it can be investigated. Crash reports are much appreciated as long as they contain a good backtrace. Nobody can assist with your crash otherwise.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the hangs... unfortunately &lt;a href=&quot;https://bugs.webkit.org/show_bug.cgi?id=197558&quot; rel=&quot;nofollow noreferrer&quot;&gt;that is a known issue&lt;/a&gt;. It will be half-fixed in the forthcoming WebKitGTK 2.24.4 release, but &lt;a href=&quot;https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/merge_requests/427&quot; rel=&quot;nofollow noreferrer&quot;&gt;the other half of the fix&lt;/a&gt; will not be available until GStreamer 1.16.1 at the earliest (and maybe not even until GStreamer 1.18, it's still uncertain). Since elementary OS will almost certainly not update GStreamer past the version available from Ubuntu, than means it will unfortunately remain broken until the next major version of elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only good news here is the next OS version should include Epiphany as a flatpak instead of a deb package, so important fixes should land much more quickly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit October 2019: The fix is available in GStreamer 1.16.1.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastEditorUserId="10316" LastEditDate="2019-10-04T15:24:07.703" LastActivityDate="2019-10-04T15:24:07.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19468" PostTypeId="1" CreationDate="2019-08-02T08:02:55.870" Score="0" ViewCount="20" Body="&lt;p&gt;I got error when updating elementary juno&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rytsar@rytsar-laptop:~$ sudo apt upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages will be upgraded:&#xA;  libsox-fmt-alsa libsox-fmt-base libsox3 sox ubuntu-minimal&#xA;5 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 0 B/372 kB of archives.&#xA;After this operation, 4.096 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;dpkg: unrecoverable fatal error, aborting:&#xA; reading files list for package 'language-pack-uk-base': Input/output error&#xA;E: Sub-process /usr/bin/dpkg returned an error code (2)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;any solution to fix this?&lt;/p&gt;&#xA;" OwnerUserId="18679" LastActivityDate="2023-12-11T10:03:30.407" Title="language-pack-uk-base error" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19469" PostTypeId="2" ParentId="19468" CreationDate="2019-08-02T08:57:25.400" Score="0" Body="&lt;p&gt;Your dpkg (package manager) can't read the listing file, required to install the 'language-pack-uk-base' package because of input/output error. Possible cause:&#xA;file system corruption. You can try solutions suggested &lt;a href=&quot;https://askubuntu.com/questions/591855/how-can-i-fix-e-sub-process-usr-bin-dpkg-returned-an-error-code-2&quot;&gt;here&lt;/a&gt;, or check your unmounted system partition with &lt;a href=&quot;https://www.computerhope.com/unix/fsck.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;fsck&lt;/code&gt;&lt;/a&gt; from a bootable USB drive.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-02T08:57:25.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19470" PostTypeId="1" CreationDate="2019-08-02T14:04:38.107" Score="0" ViewCount="347" Body="&lt;pre&gt;&lt;code&gt;$ sudo apt update &amp;amp;&amp;amp; sudo apt upgrade -y&#xA;[sudo] password for kmkd:            &#xA;Hit:1 http://in.archive.ubuntu.com/ubuntu bionic InRelease&#xA;Get:2 http://in.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]                  &#xA;Get:3 http://in.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [697 kB]                     &#xA;Hit:4 http://ppa.launchpad.net/danielrichter2007/grub-customizer/ubuntu bionic InRelease&#xA;Get:5 http://in.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [565 kB]                                  &#xA;Get:6 http://in.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [282 kB]                          &#xA;Get:7 http://in.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [66.7 kB]                            &#xA;Get:8 http://in.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [129 kB]                             &#xA;Get:9 http://in.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 128x128 Icons [342 kB]                           &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                            &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                            &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                                              &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                                              &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                                              &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                            &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                            &#xA;Get:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [980 kB]                                                  &#xA;Err:10 http://in.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages                                                     &#xA;  Hash Sum mismatch&#xA;  Hashes of expected file:&#xA;   - Filesize:980004 [weak]&#xA;   - SHA256:2595356e5b75eec44b222f9fd5a03b03e4c8b54dfaf9c23fbaf30524dba903ff&#xA;   - SHA1:262430e9ffe83545e1c76a64c604995572aee9b5 [weak]&#xA;   - MD5Sum:e86ead6cfed7dff1f8c9a8b1ba47db93 [weak]&#xA;  Hashes of received file:&#xA;   - SHA256:7af2952db640563c2cae82a72868b0ade918b30636b13c3d793766e6190ca696&#xA;   - SHA1:afe01dadae607eee0a98339d550f6308b5cdeb17 [weak]&#xA;   - MD5Sum:83b9d0465f13bceb45e21a7f02974a3f [weak]&#xA;   - Filesize:980004 [weak]&#xA;  Last modification reported: Fri, 02 Aug 2019 07:06:34 +0000&#xA;  Release file created at: Fri, 02 Aug 2019 07:43:49 +0000&#xA;Hit:18 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                          &#xA;Hit:19 http://packages.elementary.io/appcenter bionic InRelease                                                            &#xA;Get:20 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]                                               &#xA;Hit:21 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease       &#xA;Hit:22 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Fetched 1,157 kB in 1s (830 kB/s)                   &#xA;Reading package lists... Done&#xA;E: Failed to fetch http://in.archive.ubuntu.com/ubuntu/dists/bionic-updates/universe/binary-amd64/by-hash/SHA256/2595356e5b75eec44b222f9fd5a03b03e4c8b54dfaf9c23fbaf30524dba903ff  Hash Sum mismatch&#xA;   Hashes of expected file:&#xA;    - Filesize:980004 [weak]&#xA;    - SHA256:2595356e5b75eec44b222f9fd5a03b03e4c8b54dfaf9c23fbaf30524dba903ff&#xA;    - SHA1:262430e9ffe83545e1c76a64c604995572aee9b5 [weak]&#xA;    - MD5Sum:e86ead6cfed7dff1f8c9a8b1ba47db93 [weak]&#xA;   Hashes of received file:&#xA;    - SHA256:7af2952db640563c2cae82a72868b0ade918b30636b13c3d793766e6190ca696&#xA;    - SHA1:afe01dadae607eee0a98339d550f6308b5cdeb17 [weak]&#xA;    - MD5Sum:83b9d0465f13bceb45e21a7f02974a3f [weak]&#xA;    - Filesize:980004 [weak]&#xA;   Last modification reported: Fri, 02 Aug 2019 07:06:34 +0000&#xA;   Release file created at: Fri, 02 Aug 2019 07:43:49 +0000&#xA;E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18108" LastEditorUserId="16827" LastEditDate="2019-08-07T12:41:47.193" LastActivityDate="2019-08-07T12:41:47.193" Title="Hash sum mismatch error during system update" Tags="|updates|" AnswerCount="1" CommentCount="0" ClosedDate="2019-08-07T12:42:19.210" ContentLicense="CC BY-SA 4.0" />
  <row Id="19471" PostTypeId="2" ParentId="19470" CreationDate="2019-08-03T06:50:11.033" Score="0" Body="&lt;p&gt;As explained &lt;a href=&quot;https://askubuntu.com/questions/41605/trouble-downloading-packages-list-due-to-a-hash-sum-mismatch-error/&quot;&gt;here&lt;/a&gt;, hash sum mismatch errors are usually more typical for clients behind proxy caches. To solve the issue, remove all the content of &lt;code&gt;/var/lib/apt/lists&lt;/code&gt; directory:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-03T06:50:11.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19472" PostTypeId="2" ParentId="19102" CreationDate="2019-08-03T07:25:04.707" Score="5" Body="&lt;p&gt;I have managed to fix this in elementaryOS 5 (Juno). You might be able to do this on lower versions as well:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Pair the device with your computer using the default Bluetooth settings in the control panel (I assume that you have already done this).&lt;/li&gt;&#xA;&lt;li&gt;Install blueman: &lt;code&gt;sudo apt-get install blueman&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open blueman services: &lt;code&gt;blueman-services&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;A window should open, here you can select &quot;Transfers&quot; -&gt; &quot;Accept incoming files from trusted devices&quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;When you tick that box, it will work. I am not sure if you can remove blueman afterwards.&lt;/p&gt;&#xA;" OwnerUserId="13310" LastActivityDate="2019-08-03T07:25:04.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19474" PostTypeId="1" AcceptedAnswerId="19484" CreationDate="2019-08-03T12:37:12.907" Score="0" ViewCount="141" Body="&lt;p&gt;In the calendar app on Juno if I try to add my google calendar, I put in my username, but nothing happens. It never asks for a password and nothing gets added. I have already enabled less secure accounts in google/gmail settings. Mail works fine. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="4757" LastEditorUserId="4757" LastEditDate="2019-08-03T13:22:47.213" LastActivityDate="2019-08-05T01:25:58.490" Title="calendar app never asks for google password" Tags="|calendar|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19475" PostTypeId="2" ParentId="19060" CreationDate="2019-08-03T16:10:35.023" Score="0" Body="&lt;p&gt;Another option would be to install WireGuard via Snaps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use &lt;a href=&quot;https://appcenter.elementary.io/com.github.bartzaalberg.snaptastic&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snaptastic&lt;/a&gt; from the AppCenter, or install via the command line like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;snap install wireguard-ammp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2019-08-03T16:10:35.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19480" PostTypeId="2" ParentId="19421" CreationDate="2019-08-04T19:13:57.953" Score="2" Body="&lt;p&gt;NOTE: The following may delete apps or change settings of programs that you've already installed. Make sure to have a backup of the important files.&#xA;Open a Terminal and execute the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First delete all nvidia drivers with &lt;code&gt;sudo apt autoremove nvidia*&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then install the correct driver for your system with &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If any of this breaks your desktop, you can install it with &lt;code&gt;sudo apt install elementary-desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-08-04T19:13:57.953" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19481" PostTypeId="2" ParentId="19414" CreationDate="2019-08-04T19:21:51.000" Score="0" Body="&lt;p&gt;YES, the Linux kernel and elementary OS supports hybrid graphics technologies.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your specific model you may get a black screen when you boot after installing elementary. If that happens you'd need to add &lt;code&gt;nomodeset&lt;/code&gt; to the boot options on the grub menu. You do this by pressing e on the grub menu and then adding &lt;code&gt;nomodeset&lt;/code&gt; in between &lt;code&gt;quiet splash&lt;/code&gt;, like &lt;code&gt;quiet nomodeset splash&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you'd need to install the nvidia driver from the terminal with &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;. Or you could also install them from AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-08-04T19:21:51.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19482" PostTypeId="2" ParentId="19407" CreationDate="2019-08-04T19:33:00.883" Score="0" Body="&lt;p&gt;You'd need to update your kernel version to have a driver that works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.2/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you have the version 5.2 which is a mainline kernel but should work on your laptop.&#xA;You need to download the files marked with a black line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LwxB4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LwxB4.png&quot; alt=&quot;Kernel files&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then save it to any folder on your HP 17z laptop.&#xA;Press right click&gt; open in terminal and write the following on the window that appears: &lt;code&gt;sudo apt install ./lin*.deb&lt;/code&gt;. This should install everything, now you need to reboot and it should be done!&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-08-04T19:33:00.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19484" PostTypeId="2" ParentId="19474" CreationDate="2019-08-05T01:25:58.490" Score="1" Body="&lt;p&gt;Oh I got it to work. I put in my full email name@gmail.com in both the name and user section and it finally prompted me for the password. Yay!&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-05T01:25:58.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19485" PostTypeId="1" CreationDate="2019-08-05T08:58:25.357" Score="0" ViewCount="1532" Body="&lt;p&gt;cpi MSFT0101:00: platform device creation failed: -16 Unable to mount root fs on unknown-block(0,0) Hardware name : HP HP pavilion notebook/820C , BIOS F.07 05/27/2016&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have dual boot Windows 10 + Elementary Os(Ubuntu 16.04+)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything is working fine for last two years, today when I opened elementary os and run sudo apt upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In meanwhile I'm working with Firefox and vs code , suddenly my pc was slow down. Yeah that's genuine because upgrades are progressing... Firefox frized due to progress in upgrades. So i decided to shut down my laptop. When i startup my laptop the above msgs are flash in screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can i boot my elementary without settings and data loss.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;" OwnerUserId="13677" LastActivityDate="2019-08-06T08:04:43.000" Title="Issue in Boot , platform device creation failed: -16" Tags="|release-loki|boot|startup|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19486" PostTypeId="2" ParentId="19319" CreationDate="2019-08-05T17:25:46.800" Score="1" Body="&lt;p&gt;The App I am using is &lt;a href=&quot;https://johnfactotum.github.io/foliate/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Foliate&lt;/a&gt;. Is does &lt;strong&gt;not&lt;/strong&gt; come with Elementary, but is relatively easy to install, as the author supplies a &lt;a href=&quot;https://flatpak.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;flatpak&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To enable flatpaks on Elementary, follow the &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS Quick Setup&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common --no-install-recommends&#xA;sudo add-apt-repository ppa:alexlarsson/flatpak&#xA;sudo apt update&#xA;sudo apt install flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next add  the flathub repository:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Last, install &lt;a href=&quot;https://flathub.org/apps/details/com.github.johnfactotum.Foliate&quot; rel=&quot;nofollow noreferrer&quot;&gt;foliate&lt;/a&gt; (this can be done as a regular user):&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install foliate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; this is not the recommended way of installing software on Elementary, but it is &lt;a href=&quot;https://medium.com/elementaryos/elementary-appcenter-flatpak-b1f970a33861&quot; rel=&quot;nofollow noreferrer&quot;&gt;the way of the future&lt;/a&gt;, and will hopefully be fully supported in 5.1.&lt;/p&gt;&#xA;" OwnerUserId="18698" LastActivityDate="2019-08-05T17:25:46.800" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19488" PostTypeId="1" CreationDate="2019-08-05T22:43:48.300" Score="0" ViewCount="78" Body="&lt;p&gt;People I have tried everything and have mucked up the E Os installs three times based on these forums. Nothing personal but my other linux builds work fine with no problems. I thought EOS was a stronger build but that is yet to be determined. The ethernet shows up but no matter how many times I update the drivers or update the kernel. WIFI simply doesn't show up on this Lenovo desktop tower. I would really really appreciate any help before I slap give up and dump this build...&lt;/p&gt;&#xA;" OwnerUserId="18699" LastActivityDate="2019-08-06T07:42:12.920" Title="Wifi wont work or even show up in E Os. No matter what!" Tags="|wifi|" AnswerCount="1" CommentCount="0" ClosedDate="2019-08-07T16:23:58.070" ContentLicense="CC BY-SA 4.0" />
  <row Id="19490" PostTypeId="2" ParentId="19488" CreationDate="2019-08-06T07:42:12.920" Score="0" Body="&lt;p&gt;Please update your question with your hardware specifications (Which desktop/laptop, exactly hardware components, etc.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also provide us the output of &lt;code&gt;sudo lshw&lt;/code&gt;, most important here would be &lt;code&gt;sudo lshw -C network&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which version of eOS are you using?&#xA;Have you done the updates? (&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get dist-upgrade -y &amp;amp;&amp;amp; sudo apt-get autoremove -y &amp;amp;&amp;amp; sudo apt-get autoclean -y&lt;/code&gt; or similar)&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-08-06T07:42:12.920" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19491" PostTypeId="1" CreationDate="2019-08-06T07:45:03.573" Score="0" ViewCount="135" Body="&lt;p&gt;I recently switched from Linux Mint to Linux Elementary, but now I can not use my Brother DCP-J152W any more, is there a solution to solve this problem or should I buy a new printer that is more up to date and what is the best printer to chose? &lt;/p&gt;&#xA;" OwnerUserId="18701" LastActivityDate="2019-08-06T08:00:29.217" Title="Compatibilty Brother DCP-J152W with Linux Elementary" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19492" PostTypeId="2" ParentId="19491" CreationDate="2019-08-06T07:55:25.290" Score="1" Body="&lt;p&gt;Try to download the linux (deb) drivers from &lt;a href=&quot;https://support.brother.com/g/b/downloadlist.aspx?c=de&amp;amp;lang=de&amp;amp;prod=dcpj152w_us_eu_as&amp;amp;os=128&amp;amp;flang=English#SelectLanguageType-625_0_1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Support page&lt;/a&gt;. (I would try it with the Driver Install Tool from this mentioned support page.) Maybe you need to install a deb package manager first (&lt;code&gt;sudo apt install eddy&lt;/code&gt;), but I did not try to install the printer drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then follow the install instructions on the support page:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Step1. Download the tool.(linux-brprinter-installer-&lt;em&gt;.&lt;/em&gt;.&lt;em&gt;-&lt;/em&gt;.gz)&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The tool will be downloaded into the default &quot;Download&quot; directory. &#xA;  (The directory location varies depending on your Linux distribution.) &#xA;  e.g. /home/(LoginName)/Download&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step2. Open a terminal window.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step3. Go to the directory you downloaded the file to in the last&#xA;  step. By using the cd command.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;e.g. cd Downloads&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step4. Enter this command to extract the downloaded file:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Command: gunzip linux-brprinter-installer-&lt;em&gt;.&lt;/em&gt;.&lt;em&gt;-&lt;/em&gt;.gz&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;e.g. &lt;code&gt;gunzip linux-brprinter-installer-2.1.1-1.gz&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step5. Get superuser authorization with the &quot;su&quot; command or &quot;sudo su&quot;&#xA;  command.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step6. Run the tool:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Command: bash linux-brprinter-installer-&lt;em&gt;.&lt;/em&gt;.&lt;em&gt;-&lt;/em&gt; Brother machine name&lt;br&gt;&#xA;  e.g. &lt;code&gt;sudo bash linux-brprinter-installer-2.1.1-1 MFC-J880DW&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step7. The driver installation will start. Follow the installation&#xA;  screen directions.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;When you see the message &quot;Will you specify the DeviceURI ?&quot;,&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;For USB Users: Choose N(No)   For Network Users: Choose Y(Yes) and&#xA;  DeviceURI number.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The install process may take some time. Please wait until it is&#xA;  complete.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17844" LastEditorUserId="17844" LastEditDate="2019-08-06T08:00:29.217" LastActivityDate="2019-08-06T08:00:29.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19495" PostTypeId="2" ParentId="203" CreationDate="2019-08-06T09:45:41.413" Score="6" Body="&lt;p&gt;For elementary OS Juno,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.desktop.wingpanel.datetime clock-show-seconds true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18702" LastEditorUserId="16827" LastEditDate="2019-12-21T05:34:10.573" LastActivityDate="2019-12-21T05:34:10.573" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19496" PostTypeId="2" ParentId="19310" CreationDate="2019-08-06T11:14:32.130" Score="0" Body="&lt;p&gt;Please provide output of:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) &lt;code&gt;systemd-analyze time&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) &lt;code&gt;systemd-analyze blame | head -n 20&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) &lt;code&gt;sudo blkid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4) Content of file &lt;strong&gt;/etc/fstab&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-08-06T11:14:32.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19497" PostTypeId="2" ParentId="19453" CreationDate="2019-08-06T13:35:41.873" Score="0" Body="&lt;p&gt;Ok, I've found a way to fix this. I created simple script in python, that changes layouts order in preferences when the layout changing event was received. And it works!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My sript: &lt;a href=&quot;https://github.com/Arjentix/Gnome-Layout-Fix&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Arjentix/Gnome-Layout-Fix&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it will be useful for someone, who will have the same problem.&lt;/p&gt;&#xA;" OwnerUserId="17671" LastActivityDate="2019-08-06T13:35:41.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19498" PostTypeId="2" ParentId="19286" CreationDate="2019-08-06T13:57:50.833" Score="1" Body="&lt;p&gt;Just switch the user back to your normal user (username)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;su username&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additional you can run &lt;code&gt;sudo -k&lt;/code&gt; to emtpy the password cache, so next time you run a sudo command you have to enter the password again.&lt;/p&gt;&#xA;" OwnerUserId="17844" LastActivityDate="2019-08-06T13:57:50.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19499" PostTypeId="2" ParentId="13969" CreationDate="2019-08-06T19:13:30.250" Score="2" Body="&lt;p&gt;In my opinion, a more elegant solution to the CSD &quot;Client-Side Decorator&quot; GTK+ issue with VMWARE Workstation Pro/Player is to use the &quot;env&quot; command for the Applications menu desktop entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.) Open the terminal app and type the following, without quotes, and enter your password when prompted:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;sudo nano /usr/share/applications/vmware-player.desktop&quot; - For VMware player&#xA;&quot;sudo nano /usr/share/applications/vmware-workstation.desktop&quot; - For VMware workstation&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.) Change &quot;Exec=/usr/bin/vmplayer %u&quot; to &quot;Exec=env GTK_CSD=0 /usr/bin/vmplayer %u&quot; without the quotes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3.) Press Ctrl+x and press &quot;Y&quot; to indicate yes when prompted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now the application should function properly when launched from the Applications Menu or Dock.&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2019-08-06T19:13:30.250" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19502" PostTypeId="1" CreationDate="2019-08-07T05:27:46.293" Score="1" ViewCount="75" Body="&lt;p&gt;I have a high end dell precision T7610 workstation with Nvidia Graphics card. I tried installing both ubuntu and elementary OS on the system. With Ubuntu running top shows barely any CPU use on idle. With elementaryOS top should 20-40% cpu use distributed mainly across gala and plank processes and at time Xorg. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried updating to Nvidia 430 drivers, running nvidia configuration etc. The drivers are working fine and all tests are doing OK. There seems to be rendering issue with gala and plank that make them constantly use too much CPU.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="18710" LastActivityDate="2019-08-07T05:27:46.293" Title="gala and plank take too much CPU with nvidia drivers" Tags="|plank|gala|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19504" PostTypeId="2" ParentId="19414" CreationDate="2019-08-07T12:31:57.560" Score="0" Body="&lt;p&gt;Are you asking if the switchable graphics capabilities will work? If this is what you want to know, I suggest booting from USB as others have suggested, then open up a terminal execute &lt;code&gt;xrandr --listproviders&lt;/code&gt;this should list both of your graphics devices. To learn how to enable the switchable graphics for certain program, I suggest &lt;a href=&quot;https://www.youtube.com/watch?v=7-ckiKQotNw&quot; rel=&quot;nofollow noreferrer&quot;&gt;watching this video, it's a very clear explanation of how to do it.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-07T12:31:57.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19505" PostTypeId="1" CreationDate="2019-08-07T17:15:02.520" Score="0" ViewCount="690" Body="&lt;p&gt;I am having problems with the battery indicator. If i have no moes plugged i, it does not even appear on the top bar. When i connect a mouse, it appears, but the icon never changes, and the percentage is stuck on 0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JZTiR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JZTiR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hMqZZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hMqZZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It charges fine, but not being able to see how much power is left is really a hindrance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on a surface pro 5.&lt;/p&gt;&#xA;" OwnerUserId="18717" LastActivityDate="2019-08-10T11:52:17.523" Title="Battery Indicator not working" Tags="|release-juno|wingpanel|battery|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19507" PostTypeId="2" ParentId="19505" CreationDate="2019-08-08T08:15:37.710" Score="1" Body="&lt;p&gt;A kind person pointed me towards a special kernel for the Surface models, and after installing it, everything works as it should.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/jakeday/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jakeday/linux-surface&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18717" LastActivityDate="2019-08-08T08:15:37.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19511" PostTypeId="2" ParentId="12921" CreationDate="2019-08-08T16:56:18.977" Score="0" Body="&lt;p&gt;I had the same behaviour yesterday and thanks to Your comments I realized that the last chance I did to my machine was precisely in the fstab file. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I removed the problematic line and voyla! it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here it is the procedure:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1.in the terminal showed while booting Press  CTRL-D to enter emergency mode&#xA;2. enter the command &lt;code&gt;vi /etc/fstab&lt;/code&gt;&#xA;3. move to the problematic entry with arrow keys,  in vi you could remove the entire line by pressing  letter D twice&#xA;4. Exit vi saving the file by pressing ESC : WQ in secuence&#xA;5. Reboot the machine with &lt;code&gt;systemctl reboot&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This saves Me from reinstalling everything &lt;/p&gt;&#xA;" OwnerUserId="18722" LastEditorUserId="16827" LastEditDate="2019-08-10T11:47:31.993" LastActivityDate="2019-08-10T11:47:31.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19514" PostTypeId="2" ParentId="19387" CreationDate="2019-08-09T05:32:07.287" Score="0" Body="&lt;p&gt;Just generate App Password in your Google Account. You need to do it separately for each calendar you want to connect and separately for the mail. Now, when credentials window pop up you use App Password instead your account password.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/mail/answer/185833?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/mail/answer/185833?hl=en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18676" LastActivityDate="2019-08-09T05:32:07.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19515" PostTypeId="1" AcceptedAnswerId="19517" CreationDate="2019-08-09T16:21:00.980" Score="3" ViewCount="196" Body="&lt;p&gt;When there are some notifications on the screen, I can't click on the Clear All Notifications button (because they appear on top of this button). How do I solve this?&lt;/p&gt;&#xA;" OwnerUserId="18725" LastActivityDate="2020-06-13T14:41:57.790" Title="How to clear all notifications?" Tags="|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19517" PostTypeId="2" ParentId="19515" CreationDate="2019-08-09T17:54:29.763" Score="1" Body="&lt;p&gt;Good point! You should definitely report this UI design flaw to elementary OS developers @ &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-notifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-notifications&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-09T17:54:29.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19518" PostTypeId="1" CreationDate="2019-08-10T12:13:03.863" Score="1" ViewCount="68" Body="&lt;p&gt;The GUI under settings --&gt; sound doesn't seem to be very configurable? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a native way to enable two audio output devices simultaneously? &lt;/p&gt;&#xA;" OwnerUserId="17712" LastActivityDate="2019-08-10T12:13:03.863" Title="Two audio outputs simutanously?" Tags="|sound|bluetooth|audio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19519" PostTypeId="1" CreationDate="2019-08-10T17:23:18.687" Score="0" ViewCount="34" Body="&lt;p&gt;I have installed Juno on my Asus Laptop &#xA;Dual-Core Intel® Core™ i5-7200U CPU @ &#xA;Intel Corporation HD Graphics 620 (rev 02)&#xA;12.2 GB memory&#xA;Randomly I get black screen and the pointer moves all over the place, when it happens it does it continuously for a few seconds, then stops for a while and happens again, sometimes it goes away for while.&#xA;Any ideas what this could be???&lt;/p&gt;&#xA;" OwnerUserId="18730" LastActivityDate="2019-08-10T17:23:18.687" Title="Random black screen and pointer moves all over" Tags="|display|touchscreen|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19521" PostTypeId="1" AcceptedAnswerId="19522" CreationDate="2019-08-10T19:08:22.230" Score="0" ViewCount="56" Body="&lt;p&gt;I just replaced the hard drive in my laptop and attempted to install Elementary OS Juno with a USB installer created from the ISO. This laptop (Thinkpad T450s) has been stable running Elementary OS Freya for years.&#xA;Near the end of the Install process an error modal appears:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;Apt configuration problem:&lt;/strong&gt; &lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;An attempt to configure apt to  install additional packages from the&#xA;  CD failed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;[OK]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It then says everything installed and to restart. After restart (changing boot device order in BIOS, removing USB drive, etc), it will not boot into the OS at all. A black screen and it ends up bringing me back to a BIOS Boot Menu screen when it fails to boot, with several options, including the hard drive, that do nothing when attempting to boot from them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried installing 3 times now with different options including not using wifi/updating packages, and it happens every time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No Grub appears at startup like it used to either. I'm not sure if that's normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Juno runs fine on the &quot;Try elementary OS without installing&quot;.&lt;/p&gt;&#xA;" OwnerUserId="2734" LastActivityDate="2019-08-10T19:55:06.587" Title="Juno won't boot after install on a brand new SSD + &quot;Apt configuration problem&quot;" Tags="|release-juno|system-installation|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19522" PostTypeId="2" ParentId="19521" CreationDate="2019-08-10T19:55:06.587" Score="1" Body="&lt;p&gt;Maybe ISO or USB drive are corrupted. Have you verified checksum of downloaded ISO? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#creating-an-installation-medium&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18676" LastActivityDate="2019-08-10T19:55:06.587" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19523" PostTypeId="2" ParentId="19317" CreationDate="2019-08-11T12:08:07.713" Score="0" Body="&lt;p&gt;try turning off &quot;natural copy paste&quot; option in elementary tweaks.&lt;/p&gt;&#xA;" OwnerUserId="18040" LastActivityDate="2019-08-11T12:08:07.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19524" PostTypeId="1" CreationDate="2019-08-11T12:26:14.300" Score="1" ViewCount="152" Body="&lt;p&gt;I want to set a shortcut to open vscode in the current directory,&#xA;I have tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;code $(pwd)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias s1=&quot;code $pwd&quot; | s1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is working in the terminal but not as a shortcut command, is there is a way to do it?&lt;/p&gt;&#xA;" OwnerUserId="18734" LastEditorUserId="18734" LastEditDate="2019-08-11T12:32:47.460" LastActivityDate="2023-12-31T07:07:51.033" Title="Set custom shortcut command not working as expected" Tags="|keyboard-shortcuts|command-line|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19525" PostTypeId="1" CreationDate="2019-08-11T14:36:05.877" Score="1" ViewCount="511" Body="&lt;p&gt;I recently installed elementary OS Juno on my MacBook Pro 10,1 (Early 2013), dualbooting with MacOS. After initially not having any wifi at all after installation, I followed the instructions &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2214110&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; which I usually do when installing new distros and successfully installed firmware-b43-installer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I cannot detect any 5 GHz networks, only 2.4 GHz ones, despite having a compatible wifi card. &lt;strong&gt;5 GHz networks are detected on MacOS, and were also detected on Ubuntu 18.10&lt;/strong&gt; which I used before installing elementary OS. I also updated the kernel to 4.19.66-041966-generic using UKUU. I also set /etc/default/crda to my country code which was suggested somewhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some additional information about my system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lspci -nn -d 14e4:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;04:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM4331 802.11a/b/g/n [14e4:4331] (rev 02)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;iwlist chan:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lo        no frequency information.&#xA;&#xA;enx00e04c680a96  no frequency information.&#xA;&#xA;wlp4s0b1  13 channels in total; available frequencies :&#xA;          Channel 01 : 2.412 GHz&#xA;          Channel 02 : 2.417 GHz&#xA;          Channel 03 : 2.422 GHz&#xA;          Channel 04 : 2.427 GHz&#xA;          Channel 05 : 2.432 GHz&#xA;          Channel 06 : 2.437 GHz&#xA;          Channel 07 : 2.442 GHz&#xA;          Channel 08 : 2.447 GHz&#xA;          Channel 09 : 2.452 GHz&#xA;          Channel 10 : 2.457 GHz&#xA;          Channel 11 : 2.462 GHz&#xA;          Channel 12 : 2.467 GHz&#xA;          Channel 13 : 2.472 GHz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm no expert but as far as I understand it, iwlist chan suggests the wifi card does not support 5 GHz (?), but as I wrote above I know for a fact that it does. Is there anything I can do to fix this problem? I need to be able to use my 5 GHz network since 2.4 GHz is unacceptably slow. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot for any help!&lt;/p&gt;&#xA;" OwnerUserId="18735" LastActivityDate="2023-12-20T20:04:40.543" Title="No 5 GHz wifi networks detected" Tags="|release-juno|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19526" PostTypeId="1" CreationDate="2019-08-12T10:47:17.030" Score="0" ViewCount="78" Body="&lt;p&gt;This is a bit of an odd one. If I insert smaller SD cards in the built-in card reader (up to 32gb), they read no problem. However, my 128 card isn't seen at all. It reads fine in Windows. Nothing shows in the files app, and If I open Gnome Disks, nothing shows there either. USB card reader sees the card just fine. So the same card works in USB in Elementary, and it works in the built-in card reader on windows. But not on the built-in reader in Elementary OS. I'm pretty stumped.&lt;/p&gt;&#xA;" OwnerUserId="4757" LastEditorUserId="4757" LastEditDate="2019-08-12T10:58:54.067" LastActivityDate="2019-09-26T02:01:25.183" Title="SD Card reader will not see large cards" Tags="|pantheon-files|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19527" PostTypeId="1" CreationDate="2019-08-12T17:38:51.283" Score="1" ViewCount="48" Body="&lt;p&gt;Will the updates that come with 18.04.3 arrive eventually to eos? I know that I can install the enablement stack but I fear that it could break my eos install.&lt;/p&gt;&#xA;" OwnerUserId="18741" LastActivityDate="2019-08-12T17:38:51.283" Title="when will the 18.04.3 updates arrive to eos?" Tags="|updates|kernel|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19530" PostTypeId="1" CreationDate="2019-08-13T00:58:15.580" Score="1" ViewCount="149" Body="&lt;p&gt;Has anyone managed to change the greeter resolution? Found solutions here involving lightdm configs but it was from 2015 and when i tried it didn't really change.&#xA;My session resolution is 1680*900 but native is 1920*1080 and the greeter defaults to that. &lt;/p&gt;&#xA;" OwnerUserId="8465" LastActivityDate="2023-12-22T03:06:35.777" Title="Greeter Resolution on Juno" Tags="|release-juno|greeter|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19531" PostTypeId="2" ParentId="19525" CreationDate="2019-08-13T09:43:39.710" Score="0" Body="&lt;p&gt;It seems like it was a driver issue. I already tried to &lt;code&gt;sudo apt purge firmware-b43-installer&lt;/code&gt; and &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;, i.e. changing the drivers, which didn't solve the issue. However, I figured something might have gone wrong so I tried it again today. Purging the drivers caused the computer to crash, but then I did a hard reboot, installed the other drivers again using a wifi dongle, and now it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oddly enough, Ubuntu 18.10 and elementary OS 5 Juno don't use the same wifi drivers. Good to remember for the future.&lt;/p&gt;&#xA;" OwnerUserId="18735" LastActivityDate="2019-08-13T09:43:39.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19535" PostTypeId="1" CreationDate="2019-08-14T02:28:26.407" Score="0" ViewCount="68" Body="&lt;p&gt;How do I make  the downloaded ISO file on my USB drive bootable so i can install it? I have downloaded the ISO file and do not know what to do next to install it and make it dual boot with windows 7.&lt;/p&gt;&#xA;" OwnerUserId="18749" LastActivityDate="2020-09-07T08:04:00.547" Title="making my iso file bootable?" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19537" PostTypeId="2" ParentId="19535" CreationDate="2019-08-14T06:37:42.213" Score="1" Body="&lt;p&gt;You have to create a bootable USB using your ISO. On Windows you can do that with &#xA;&lt;a href=&quot;https://rufus.ie&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rufus&lt;/a&gt;, and on a Mac - with &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Etcher&lt;/a&gt;. To dual boot with Windows, install elementary OS on a separate partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For details please read &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt; or &lt;a href=&quot;https://www.lifewire.com/create-elementary-os-live-usb-drive-2202054&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-14T06:37:42.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19539" PostTypeId="2" ParentId="19530" CreationDate="2019-08-14T15:14:03.003" Score="0" Body="&lt;p&gt;First generate a &quot;modeline&quot; by using &lt;strong&gt;cvt&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Syntax is: &lt;strong&gt;cvt&lt;/strong&gt; width height refreshrate&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cvt 1920 1080 60&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this gives you:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz&#xA;Modeline &quot;1920x1080_60.00&quot;  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now tell this to &lt;strong&gt;xrandr&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --newmode &quot;1920x1080_60.00&quot; 173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can now add it to the table of possible resolutions of an output of your choice:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --addmode eDP-1 1920x1080_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can find the Monitor name by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# xrandr --listmonitors&#xA;Monitors: 1&#xA; 0: +*eDP-1 1366/344x768/193+0+0  eDP-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The changes are lost after reboot, to set up the resolution persistently, create the file &lt;code&gt;~/.xprofile&lt;/code&gt; with the content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;xrandr --newmode &quot;1920x1080_60.00&quot; 173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync&#xA;xrandr --addmode eDP-1 1920x1080_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/377937/how-to-set-a-custom-resolution&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16439" LastActivityDate="2019-08-14T15:14:03.003" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19541" PostTypeId="2" ParentId="16806" CreationDate="2019-08-14T21:32:11.980" Score="0" Body="&lt;p&gt;Did you check &quot;use WiFi proprietary drivers&quot; during install? If so, don't check this box and use open source drivers instead. Eventually you can uninstall proprietary drivers later from AppCenter and reboot. On my computer WiFi proprietary drivers cause a lot of problems. It's not elementaryOS fault but the Broadcom company and their shitty drivers. &lt;/p&gt;&#xA;" OwnerUserId="18676" LastActivityDate="2019-08-14T21:32:11.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19542" PostTypeId="1" CreationDate="2019-08-14T22:41:29.977" Score="0" ViewCount="150" Body="&lt;p&gt;I just switched from windows to elementary OS Juno.&lt;/p&gt;&#xA;&lt;p&gt;My Ethernet works perfectly. I only have issue with the Wifi, I've been trying a bunch of drivers and no success yet. I ran the following commands:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;iwconfig&lt;/code&gt; shows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;lo no wireless extensions.&#xA;eno1 no wireless extensions.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;inxi -nx&lt;/code&gt; shows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Network: Card-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter&#xA;           port: 4000&#xA;         bus-ID: 02:00.0&#xA;             IF: N/A&#xA;          state: N/A&#xA;            mac: N/A&#xA;         Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller&#xA;         driver: r8169&#xA;              v: 2.3LK-NAPI&#xA;           port: 3000&#xA;         bus-ID: 03:00.0&#xA;             IF: eno1&#xA;          state: &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The laptop brand and model is: HP PAVILION 15-cs0022cl&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="18756" LastEditorUserId="25612" LastEditDate="2021-10-13T08:27:34.510" LastActivityDate="2024-03-01T16:04:30.563" Title="eOS Juno - HP PAVILION 15 - No WiFi after installation" Tags="|release-juno|wifi|drivers|laptop|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="19545" PostTypeId="1" CreationDate="2019-08-15T19:13:46.460" Score="0" ViewCount="27" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xE5kt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xE5kt.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;Im new on elementary os. I quite like it so far but i have a serious issue. My computer freezes while watching videos or after wake up. I can only move the cursor but i cannot click not even with keyboard. So I turn of my pc by pressing the power button. There is no exsessive heat. I put my computers spec below. please help I'll have to install win7 if no one help me :( &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Asus-X201EP&#xA;Dual-Core Intel® Celeron® CPU 847 @ 1.10GHz&#xA;1.9 GB memory&#xA;117.1 GB SSD storage&lt;/p&gt;&#xA;" OwnerUserId="18760" LastEditorDisplayName="user18761" LastEditDate="2019-08-17T03:01:59.353" LastActivityDate="2019-08-17T03:01:59.353" Title="system freezes while watching video or after wake up" Tags="|system|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19547" PostTypeId="1" CreationDate="2019-08-16T15:35:11.493" Score="3" ViewCount="2464" Body="&lt;p&gt;My setup is the pantheon DE (and a it's apps like files and terminal etc) installed on top of ubuntu 18.04. I've had this setup for about 6 ~ 7 months with no issues.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After a routine system update very recently, the pantheon DE options has disappeared from the list of available DE on the system and only ubuntu and ubuntu (wayland) are available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now i have a Frankenstein of a system with a mix of elementary and ubuntu apps and settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things I've tried so far:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;reinstall elementary-desktop&lt;/li&gt;&#xA;&lt;li&gt;reinstall lightdm&lt;/li&gt;&#xA;&lt;li&gt;reinstall pantheon-greeter&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Thanks for reading !&lt;/p&gt;&#xA;" OwnerUserId="18768" LastEditorUserId="18768" LastEditDate="2019-08-16T17:11:01.400" LastActivityDate="2019-08-22T17:59:33.790" Title="Pantheon DE missing from lightdm after ubuntu update" Tags="|greeter|pantheon|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19549" PostTypeId="1" CreationDate="2019-08-17T04:58:10.007" Score="0" ViewCount="178" Body="&lt;p&gt;My elementary OS on laptop Lenovo Legion Y530 sometimes freezes when I try to watch video oraz browse facebook or something more heavier work for processor. Before system freezing in logs I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU9: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU11: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU10: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU2: Core temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU8: Core temperature above threshold, cpu clock throttled (total events = 1)&#xA;&#xA;mce: CPU8: Package temperature above threshold, cpu clock throttled (total events = 1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After this I need to reboot system with the power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can any one help me with this? This problem is very bothersome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards&lt;br&gt;&#xA;Łukasz&lt;/p&gt;&#xA;" OwnerUserId="18774" LastEditorUserId="16827" LastEditDate="2019-08-23T06:09:26.673" LastActivityDate="2023-12-30T15:02:00.233" Title="ElementaryOS Juno - random system freezes" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19550" PostTypeId="2" ParentId="19549" CreationDate="2019-08-17T11:11:19.117" Score="0" Body="&lt;p&gt;Several possibilities, most likely not Elementary related. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/941686/cpu-hardware-errors-in-ubuntu-17-04&quot;&gt;https://askubuntu.com/questions/941686/cpu-hardware-errors-in-ubuntu-17-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;update your bios&lt;/li&gt;&#xA;&lt;li&gt;Clean fans&lt;/li&gt;&#xA;&lt;li&gt;You can throttle your cpu, but that is only a temporal solution&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="18698" LastActivityDate="2019-08-17T11:11:19.117" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19552" PostTypeId="1" CreationDate="2019-08-17T17:24:32.570" Score="0" ViewCount="91" Body="&lt;p&gt;When I try to open AppCenter or do sudo apt-get command. It gives me a error with the following message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The package jdk-11.0.4 needs to be reinstalled, but I can't find an archive for it.&#xA;E: Unable to apply corrections for half-installed packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried removing jdk-11.0.4 too. But it's not working.&lt;/p&gt;&#xA;" OwnerUserId="18777" LastActivityDate="2023-12-30T21:06:00.703" Title="AppCenter and sudo apt &quot;failed to updates&quot;" Tags="|release-juno|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19556" PostTypeId="2" ParentId="14105" CreationDate="2019-08-18T07:55:37.937" Score="0" Body="&lt;p&gt;The  &lt;strong&gt;top&lt;/strong&gt;  command is what was needed. THX alot. &#xA;Ad first I tried to find out with gnome system monitor..it showed me 0% CPU usage.&#xA;&lt;strong&gt;top command&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;identified high CPU usage of &lt;strong&gt;packgagekitd&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;, which is an update lookup and for the reason my fans where spinning full time.&#xA;Just in case you experience the same issue..after using &lt;strong&gt;top&lt;/strong&gt;, type:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo killall -KILL packagekitd&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;and quite time is back again.BTW, I'm new to Elementary Os..I started with Juno..&lt;/p&gt;&#xA;" OwnerUserId="18782" LastEditorUserId="18782" LastEditDate="2019-08-18T08:01:01.733" LastActivityDate="2019-08-18T08:01:01.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19558" PostTypeId="1" CreationDate="2019-08-18T09:55:53.407" Score="0" ViewCount="38" Body="&lt;p&gt;I’ve been trying to install elementary OS on my girlfriend's laptop for the better part of the day, but the installer keeps crashing, with errors like this. Any advice?&#xA;I can go into elementary without installing and play around for a bit, it’s just whenever I try installing that there are problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tHm1Z.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tHm1Z.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18784" LastEditorUserId="16827" LastEditDate="2019-08-23T06:10:24.160" LastActivityDate="2019-09-25T11:01:30.197" Title="Installer keeps crashing (squashes error)" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19559" PostTypeId="1" CreationDate="2019-08-18T13:47:39.690" Score="0" ViewCount="22" Body="&lt;p&gt;When youtube is on full screen mode, opening applications &lt;code&gt;⌘ + space&lt;/code&gt; won't take precedence over youtube video.&lt;/p&gt;&#xA;" OwnerUserId="18785" LastActivityDate="2019-08-18T13:47:39.690" Title="Opening applications won't show if youtube is full screen" Tags="|release-juno|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19560" PostTypeId="1" CreationDate="2019-08-19T03:45:33.953" Score="0" ViewCount="1077" Body="&lt;p&gt;I just did a fresh install of Juno on my laptop and I am not able to browse.  I am able to ping my router and am even able to ping google.com by the IP address, but not by host.  I'm concluding this is a dns config problem.  This is true for both wifi connections and hard-wired network connections.  I have configured the &quot;additional DNS servers&quot; in IPv4 Settings with the open dns servers, but still can't ping www.google.com.  Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another strange thing is that I am able to browse to github.com but no other sites. My /etc/resolve.conf has the following entries:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nameserver 127.0.0.53&#xA;search san.rr.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also notice that when I ping www.google.com, it is resolving to an ipv6 address. I've never had luck with using ipv6. Is there a way to disable it? Could this be the problem? &lt;/p&gt;&#xA;" OwnerUserId="18787" LastEditorUserId="16827" LastEditDate="2019-08-23T06:07:14.183" LastActivityDate="2024-01-03T00:04:45.617" Title="Why is dns not working with my new Elementary Os Juno install working?" Tags="|release-juno|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19561" PostTypeId="1" CreationDate="2019-08-19T09:28:01.930" Score="1" ViewCount="55" Body="&lt;p&gt;I've used Freya, Loki and now Juno. From memory, it was the same with each. Whenever I install a new printer through the GUI, the printer name (in print dialogs) shows as something non-descriptive such as &quot;LPD_LPR_Host_or_Printer&quot;, rather than the description I give it (which in my case would be something like &quot;MFC-L2750&quot;.&#xA;I only have one printer at home, but would still like to see a proper name (that I give it) rather than what it is now. &#xA;For the moment I use Cups to setup printers, as that allows me to specify a pretty name, but its something I would expect to be able to do in the System printer setup UI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess it's not so much a question as a comment. :-D&lt;/p&gt;&#xA;" OwnerUserId="11750" LastActivityDate="2023-12-26T21:04:35.473" Title="Printer naming in Juno" Tags="|release-juno|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19562" PostTypeId="1" CreationDate="2019-08-19T09:53:10.590" Score="0" ViewCount="506" Body="&lt;p&gt;My problem is the following&#xA;Who knows how?&#xA;I'm not talking about the Elemementary App Store downloads.&#xA;I mean programs from other official sites like for Epson printer drivers and scanners, where there is NO link/address to use &quot;apt-get install &amp;lt;…&gt;&quot; etc. in terminal code.&#xA;When I use the download button and unzip the download it opens bit I cant see the '.exe' button, only the folders * files - so it's not visible' in the &quot;Apps&quot; window - thus useless.&#xA;When I try to open in in terminal editor I get: &quot; unable to locate file&quot; etc. &#xA;So could you tell me how to, preferably, get the get the terminal address from the button on the download site&#xA;or&#xA;How to install the downloaded zip/.tar using the terminal code, with the correct folder indicators - thus a few lines of code plz.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;this is what the terminal says:&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;See image .. it's what Eddy says about the iScan installation &amp;amp; yes I am trying to open the 770 64bit tar gz .. Btw Eddy also says this for my Vuex (vuescan) package, but I did manage to install that and it starts to run but needs the iscan plugin ..... So can you help again plz?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;eddy&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;See image .. it's what Eddy says about the iScan installation &amp;amp; yes I am trying to open the 770 64bit tar gz .. Btw Eddy also says this for my Vuex (vuescan) package, but I did manage to install that and it starts to run but needs the iscan plugin ..... So can you help again plz?&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;OK here is what I get, it seems to be installed but does not seem to get into the Vuescan or iScan app.&#xA;But non of my usb printers connect either, one says it's printing but I get no result on paper(WF-2010) . My Stylus pro 3800 just does nothing .. so maybe we should look at how to check  if the usb periphials are visible.&#xA;Btw I do see external usb HDD's when I connect them,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;It seems that I can only send one image at a time here so sorry for all the posts&lt;a href=&quot;https://i.stack.imgur.com/zYkpK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zYkpK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;It seems that I can only send one image at a time here so sorry for all the posts&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1gqNV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;OK, now I found the problem with the screenshots.&#xA;Also i tried the Terminal fix suggested in the instructions, bit to no avail :(&#xA;Get the same fault report.&#xA;Can you help please?&#xA;see attachments&lt;a href=&quot;https://i.stack.imgur.com/1gqNV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;fault message&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zYkpK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zYkpK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18788" LastEditorUserId="16827" LastEditDate="2019-09-21T13:31:03.117" LastActivityDate="2024-02-21T00:01:15.117" Title="I cant install zip (.tar) files using desktop from other Linux Ubuntu downloads" Tags="|software-installation|slingshot|thirdpartyapps|download|gnome-terminal|" AnswerCount="2" CommentCount="14" ContentLicense="CC BY-SA 4.0" />
  <row Id="19563" PostTypeId="2" ParentId="19561" CreationDate="2019-08-19T12:47:11.450" Score="0" Body="&lt;p&gt;Go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Printers&lt;/code&gt;, then click your printer's &lt;code&gt;Settings and Supplies&lt;/code&gt; tab. There, in the &lt;code&gt;Description&lt;/code&gt; field, you can rename your printer to whatever you want.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-08-19T12:47:11.450" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19564" PostTypeId="2" ParentId="19344" CreationDate="2019-08-19T18:53:48.883" Score="1" Body="&lt;p&gt;I found an answer &lt;a href=&quot;https://unix.stackexchange.com/questions/23449/gnome-3-gnome-control-center-empty&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS has the Gnome Control Center installed, but it's kind of hidden. You can try to open it from the command line with &lt;code&gt;gnome-control-center&lt;/code&gt; but it's blank. I first tried installing Gnome Online Accounts with this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-online-accounts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That didn't resolve the situation. Then I found the solution I've linked to:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Essentially the gnome control center only works when the desktop environment is Gnome. The command provided above sets the current environment to Gnome then opens the gnome-control-center inside of that environment. Allowing it to load properly.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;So it'll work if you run this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=GNOME gnome-control-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4566" LastActivityDate="2019-08-19T18:53:48.883" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19567" PostTypeId="1" CreationDate="2019-08-20T13:11:15.003" Score="2" ViewCount="155" Body="&lt;p&gt;When I lock my desktop PC or let it sleep it often won't resume after waking.&#xA;Sometimes the screen just flickers and sometimes I get a underscore (_) on the screen while it does nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on the latest elementary OS Juno release with kernel 4.15.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My specs are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel core i7 7700 &lt;/li&gt;&#xA;&lt;li&gt;Nvidia GTX 1080 with nvidia-430 drivers.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I did install the nvidia 430 drivers with the official Ubuntu graphics ppa, but using the same driver on Ubuntu 18.04, Xubuntu 18.04 and Lubuntu 18.04 does not give any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's noteworthy that it does not seem to happen on any other Linux distro, including normal Ubuntu 18.04. I also seem unable to access any TTY's.&lt;/p&gt;&#xA;" OwnerUserId="2629" LastEditorUserId="2629" LastEditDate="2019-08-26T10:37:30.270" LastActivityDate="2019-09-27T08:02:55.537" Title="Elementary won't resume after sleep" Tags="|release-juno|greeter|xorg|lock|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19569" PostTypeId="1" CreationDate="2019-08-20T17:53:10.367" Score="0" ViewCount="128" Body="&lt;p&gt;In power options I don't see any option to shutdown when I press the power ON button, or the option to hibernate when I close the laptop lid. I wonder why, as this is what I use in Windows. I would have definitely preferred the same here.&#xA;Also there is a slight problem with the headphone connection. It is not recognized if the headphone is connected before the laptop is turned ON. But works fine if I remove it and reconnect.&lt;/p&gt;&#xA;" OwnerUserId="18804" LastActivityDate="2024-01-04T08:04:45.603" Title="Hibernate and Power Off options" Tags="|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19570" PostTypeId="1" AcceptedAnswerId="22495" CreationDate="2019-08-20T22:42:40.103" Score="0" ViewCount="150" Body="&lt;p&gt;I have a MacBook Pro 2017 running macOS Mojave (10.14.6). I want to try elementary OS but I wanted to make sure if for some reason I wanted to switch back to macOS I would be able to do so through the normal recovery means. Is this possible before I go overwriting my macOS installation?&lt;/p&gt;&#xA;" OwnerUserId="18807" LastActivityDate="2020-02-19T13:01:52.840" Title="Will elementary OS erase macOS recovery?" Tags="|system-installation|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19571" PostTypeId="2" ParentId="19547" CreationDate="2019-08-21T06:48:45.007" Score="0" Body="&lt;p&gt;A working installation has the following&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;   ll /usr/share/xsessions &#xA;&#xA;   total 12K&#xA;   -rw-r--r-- 1 root root 183 Sep 14  2018 pantheon.desktop&#xA;   -rw-r--r-- 1 root root 323 May  2  2018 ubuntu-communitheme-snap.desktop&#xA;   -rw-r--r-- 1 root root 247 May  2  2018 ubuntu.desktop&#xA;&#xA;   cat /usr/share/xsessions/pantheon.desktop&#xA;&#xA;   [Desktop Entry]&#xA;   Name=Pantheon&#xA;   Comment=This session provides elementary experience&#xA;   Exec=gnome-session --session=pantheon&#xA;   TryExec=wingpanel&#xA;   Icon=&#xA;   DesktopNames=Pantheon&#xA;   Type=Application&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Restoring that might help. Not sure why it has been removed from the package and more investigation will be required.&lt;/p&gt;&#xA;" OwnerUserId="12329" LastActivityDate="2019-08-21T06:48:45.007" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19574" PostTypeId="2" ParentId="17101" CreationDate="2019-08-21T10:30:14.243" Score="0" Body="&lt;p&gt;Another solution is &lt;strong&gt;disabling the title bar&lt;/strong&gt; in Firefox's Customize mode - this will fix the issue and also brings window controls and tabs next to each other and thus making more space available for the website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/9ucdxd/firefox_right_click_context_menu_gets_activated/e936sw5&quot; rel=&quot;nofollow noreferrer&quot;&gt;Reddit&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18813" LastActivityDate="2019-08-21T10:30:14.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19579" PostTypeId="1" CreationDate="2019-08-22T03:06:05.043" Score="0" ViewCount="697" Body="&lt;p&gt;When using files and dragging-dropping files (while sorting files for instance), the mouse pointer regularly freezes in drag mode, and nothing seems to be working to recover control of the machine.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2019-08-22T16:09:18.730" Title="Mouse pointer stuck in drag mode when using Files and dragging-dropping" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19580" PostTypeId="2" ParentId="19579" CreationDate="2019-08-22T03:06:05.043" Score="1" Body="&lt;p&gt;The solution is &lt;strong&gt;Alt+Tab&lt;/strong&gt; to files app and then press &lt;strong&gt;Alt+F4&lt;/strong&gt; to close it. It releases the mouse pointer from drag mode successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The question was originally solved in one of the answers to the question asked &lt;a href=&quot;https://askubuntu.com/questions/1021494/mouse-is-stuck-in-drag-mode-hand-icon-cannot-click-anything-other-than-the-to&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It took me a while to discover how to unlock the situation, and not having to hard reboot to get out of it.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2019-08-22T16:09:18.730" LastActivityDate="2019-08-22T16:09:18.730" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19581" PostTypeId="2" ParentId="19562" CreationDate="2019-08-22T10:03:14.917" Score="0" Body="&lt;p&gt;Please look at the screenshot. Is this the Epson Perfection V500 driver that you are trying to install?&lt;a href=&quot;https://i.stack.imgur.com/MU3TO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MU3TO.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;...&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPD:&lt;/strong&gt; If the manufacturer's installation instructions have failed, here's what you could try:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to your &lt;code&gt;AppCenter&lt;/code&gt;. In the search field, type &lt;strong&gt;Eddy&lt;/strong&gt; (this is a handy .deb packages installation helper), select and install Eddy application.&lt;/li&gt;&#xA;&lt;li&gt;Download the scanner driver archive from the Epson link. Make sure to choose .deb 64bit(amd64) version, if your processor is 64bit. In this case, the name of the archive will be &lt;code&gt;iscan-gt-x770-bundle-1.0.1.x64.deb.tar.gz&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In &lt;code&gt;Files&lt;/code&gt; browser, right-click the downloaded archive and select &lt;code&gt;Extract Here&lt;/code&gt;. This will extract the archive into the folder &amp;quot;iscan-gt-x770-bundle-1.0.1.x64.deb&amp;quot;.&lt;/li&gt;&#xA;&lt;li&gt;Go to that folder. There you will find three more folders (core, data, plugins). Inside each of these folders you will find a file with a &lt;code&gt;.deb&lt;/code&gt; extension. Double-click each of these .deb files and install them with Eddy. Reboot if necessary.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-08-22T11:06:52.143" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="19583" PostTypeId="2" ParentId="9602" CreationDate="2019-08-22T11:28:24.710" Score="0" Body="&lt;p&gt;It's more of a workaround, but I switched to a &lt;strong&gt;keyboard layout with no dead keys&lt;/strong&gt; - as I anyways never use them (and it's still possible to type them using compose key).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way a press on the keyboard directly inserts the acute character.&lt;/p&gt;&#xA;" OwnerUserId="18813" LastActivityDate="2019-08-22T11:28:24.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19585" PostTypeId="2" ParentId="19547" CreationDate="2019-08-22T14:18:07.003" Score="5" Body="&lt;p&gt;I've found that with an update of an elementaryos component, they updated a dependency version of the package libmutter-2-0, version 3.28.4-0ubuntu18.04.1+elementary4~ubuntu5.0.1, which is not from the ubuntu repo but from another elementaryos specific, ppa:elementary-os/os-patches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Due to this missing dependency, apt removed packages gala and pantheon-shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Added the ppa, installed both packages, and got it working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps&lt;/p&gt;&#xA;" OwnerUserId="17714" LastEditorUserId="17714" LastEditDate="2019-08-22T17:59:33.790" LastActivityDate="2019-08-22T17:59:33.790" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19589" PostTypeId="1" CreationDate="2019-08-22T19:09:00.143" Score="1" ViewCount="203" Body="&lt;p&gt;I just switch to Elementary OS a couple of days ago. I'm in troubles, because i can't connect my laptop (Notebook HP - 15-da0004la) the option to connect wirless doesn't even appear, i can only connect to internet via Ethernet. I have tried a lot of thing i've read on internet, i'm just gonna paste the history here. Also is important to say the Network Controller is a Realtek Semiconductor Co., Ltd. RTL8723DE 802.11b/g/n PCIe Adapter,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;History:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    1  sudo apt-get install linux-headers-generic build-essential git&#xA;    2  sudo modprobe rtl8723de&#xA;    3  sudo sed -i '/blacklist bcma/ d' /etc/modprobe.d/blacklist.conf&#xA;    4  sudo sed -i '/blacklist brcmsmac/ d' /etc/modprobe.d/blacklist.conf&#xA;    5  sudo apt-get install cheese build-essential linux-headers-`uname -r`&#xA;    6  lspci&#xA;    7  lspci -k | more&#xA;    8  pci | less&#xA;    9  :~$ sudo apt update &amp;amp;&amp;amp; sudo apt install git dkms&#xA;   10  :sudo apt update &amp;amp;&amp;amp; sudo apt install git dkms&#xA;   11  sudo apt install git dkms&#xA;   12  :~$ cd Downloads&#xA;   13  :~$ git clone -b extended --single-branch https://github.com/lwfinger/rtlwifi_new.git&#xA;   14  unofficial&#xA;   15  :~$ cd rtlwifi_new&#xA;   16  Now, either you can run:&#xA;   17  :~/Downloads/rtlwifi_new$ make &#xA;   18  :~/Downloads/rtlwifi_new$ sudo make install&#xA;   19  OR use dkms to build and manage the modules:&#xA;   20  :~/Downloads/rtlwifi_new$ sudo dkms add ../rtlwifi_new&#xA;   21  :~/Downloads/rtlwifi_new$ sudo dkms build rtlwifi-new/0.6 &#xA;   22  :~/Downloads/rtlwifi_new$ sudo dkms install rtlwifi-new/0.6&#xA;   23  :~/Downloads/rtl-new/rtlwifi_new$ sudo modprobe -v rtl8723de ant_sel=2&#xA;   24  lshw -C network&#xA;   25  lshw -C network&#xA;   26  lspci | grep -i wireless&#xA;   27  sudo update-pciids&#xA;   28  lspci -v&#xA;   29  lspci&#xA;   30  uname -r&#xA;   31  su”/”sudo&#xA;   32  $ sudo reboot&#xA;   33  sudo reboot&#xA;   34  sudo apt-get install build-essential dkms&#xA;   35  modinfo rtl8723de&#xA;   36  sudo apt install inxi&#xA;   37  sudo reboot&#xA;   38  inxi -Fxz&#xA;   39  modinfo rtl8723de&#xA;   40  sudo apt-get install build-essential dkms&#xA;   41  modinfo rtl8723de&#xA;   42  git clone https://github.com/smlinux/rtl8723de.git -b 5.0-up&#xA;   43  dkms add ./rtl8723de&#xA;   44  dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414&#xA;   45  depmod -a&#xA;   46  sudo dkms add ./rtl8723de&#xA;   47  dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414&#xA;   48  depmod -a&#xA;   49  sudo dkms install rtl8723de/5.1.1.8_21285.20171026_COEX20170111-1414&#xA;   50  depmode -a&#xA;   51  sudo password root&#xA;   52  sudo passwd root&#xA;   53  su -&#xA;   54  history&#xA;   55  sudo apt install --install-recommends linix-generic-hwe-18.04&#xA;   56  sudo apt install git build-essential dkms&#xA;   57  git clone -b extended https://github.com/lwfinger/rtlwifi_new.git&#xA;   58  sudo dkms add ./rtlwifi_new&#xA;   59  sudo dkms install rtlwifi-new/0.6&#xA;   60  boot&#xA;   61  reboot&#xA;   62  history&#xA;   63  sudo modprobe -r rtl8723de &amp;amp;&amp;amp; sudo modprobe rtl8723de&#xA;   64  sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;   65  reboot&#xA;   66  history&#xA;   67  sudo modprobe -r rtl8723de &amp;amp;&amp;amp; sudo modprobe rtl8723de&#xA;   68  sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;   69  reboot&#xA;   70  history&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I really need help&lt;/p&gt;&#xA;" OwnerUserId="18827" LastActivityDate="2023-12-10T16:00:20.043" Title="I have no WiFi option avaliable" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19590" PostTypeId="2" ParentId="16548" CreationDate="2019-08-22T21:36:57.463" Score="0" Body="&lt;p&gt;None of the settings fixed by Sony Vaio touchpad. Editing the gnome settings directly did fix my issue.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.peripherals.touchpad click-method areas&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13129" LastEditorUserId="16827" LastEditDate="2019-08-23T06:04:54.123" LastActivityDate="2019-08-23T06:04:54.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19593" PostTypeId="2" ParentId="19552" CreationDate="2019-08-23T06:26:48.903" Score="0" Body="&lt;p&gt;As the error suggested, you need to reinstall &lt;code&gt;jdk-11.0.4&lt;/code&gt;. Please open terminal and execute &lt;code&gt;sudo apt-get install --reinstall jdk-11.0.4&lt;/code&gt; to reinstall the package. &lt;/p&gt;&#xA;" OwnerUserId="16827" LastActivityDate="2019-08-23T06:26:48.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19594" PostTypeId="2" ParentId="19524" CreationDate="2019-08-23T18:29:52.750" Score="0" Body="&lt;p&gt;Go to System Settings --&gt; Keyboard --&gt; Shortcut --&gt; Custom and click the + in the lower side of the right panel.&lt;/p&gt;&#xA;" OwnerUserId="13129" LastActivityDate="2019-08-23T18:29:52.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19595" PostTypeId="1" CreationDate="2019-08-23T22:17:46.467" Score="2" ViewCount="413" Body="&lt;p&gt;I am running Elementary OS on an Acer Chromebook 15 (CB3-532). Everything worked fine but audio didn't work. I saw a post online that said to copy an asound.state file from a computer with Chrome OS or GalliumOS and copy that file to &lt;code&gt;/var/lib/alsa/asound.state&lt;/code&gt;. and then run the following command &lt;code&gt;sudo alsa force-reload alsactl init sudo alsactl store --file /var/lib/alsa/asound.state sudo alsa force-reload&lt;/code&gt;&#xA;My headphones are working now, but the speakers still doesn't work. Does anyone know what I can do so both my speakers and headphone jack work?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/g7V9R13j&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here's a link to my asound.state file just in case anyone wanted to see it.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18831" OwnerDisplayName="currentfloat" LastEditorUserId="18831" LastEditDate="2019-08-24T13:14:02.307" LastActivityDate="2020-09-19T01:03:10.320" Title="I can't get the audio on my laptop to work correctly" Tags="|sound|chromebook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19596" PostTypeId="1" AcceptedAnswerId="24845" CreationDate="2019-08-23T23:00:44.657" Score="2" ViewCount="148" Body="&lt;p&gt;I wanted to start working on issue &lt;a href=&quot;https://github.com/elementary/calendar/issues/419&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/issues/419&lt;/a&gt; but I encountered a bug. So I wanted to debug the application code I added.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found this tutorial on debugging vala code &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala/Tutorial&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.gnome.org/Projects/Vala/Tutorial&lt;/a&gt; but I'm not sure how to pass the correct build arguments to valac when using the meson build system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone give me a tip? &lt;/p&gt;&#xA;" OwnerUserId="16820" LastActivityDate="2020-06-09T11:45:28.490" Title="Debugging applications during development" Tags="|development|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19599" PostTypeId="1" CreationDate="2019-08-24T05:07:44.503" Score="0" ViewCount="31" Body="&lt;p&gt;When creating a calendar entry and inviting a recipient an invite is never sent so the other attendees to the appointment are never notified.&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2020-03-11T18:53:37.960" Title="Calendar invite is never sent to recipients" Tags="|calendar|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19601" PostTypeId="2" ParentId="19595" CreationDate="2019-08-24T12:19:46.003" Score="1" Body="&lt;p&gt;I've had this happen on my Dell, though it's not a chromebook, but maybe a similar issue. Speakers work, but not the headphones, I was able to fix it by plugging in the headphones and executing &lt;code&gt;alsactl restore&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-08-24T12:19:46.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19603" PostTypeId="1" CreationDate="2019-08-24T14:39:59.830" Score="1" ViewCount="503" Body="&lt;p&gt;My elementary 5.0 is extremely slow to wake up from locked screen after it's been locked for a while. I input my password and then nothing happens for a long time. We're talking minutes. How would I go about troubleshooting this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And BTW, I've done &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89#issuecomment-461169400&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; to keep it from suspending when on power. Maybe that broke something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I'm using a SSD, and I have set the computer to never suspend. There was a workaround I had to do as there is a known bug in the power settings, see the link above.&lt;/p&gt;&#xA;" OwnerUserId="18371" LastEditorUserId="18371" LastEditDate="2019-08-25T13:39:17.360" LastActivityDate="2024-01-16T11:04:25.553" Title="Very slow wakeup from locked screen" Tags="|release-juno|lock|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19604" PostTypeId="1" CreationDate="2019-08-24T15:52:40.460" Score="1" ViewCount="293" Body="&lt;p&gt;I have a mysterious network manager applet in wingpanel:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5TjeJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5TjeJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to remove it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PD Already tried &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;apt remove nm-applet&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="17099" LastActivityDate="2020-01-27T00:51:09.967" Title="mysterious network applet" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19605" PostTypeId="1" CreationDate="2019-08-24T19:17:48.640" Score="0" ViewCount="286" Body="&lt;p&gt;I'm trying to watch NBC Sports Gold, I assume it's flash but I don't really know. The video will not load. I have tried Chrome, Firefox and Epiphany. Flash appears to be installed. What do I do? I'm using Juno. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="17837" LastActivityDate="2024-03-06T03:07:35.990" Title="How can I get flash video to work?" Tags="|release-juno|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19606" PostTypeId="2" ParentId="10627" CreationDate="2019-08-25T02:09:24.150" Score="0" Body="&lt;p&gt;Just to give you some food for thought i recently came across Hiri &lt;a href=&quot;https://www.hiri.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.hiri.com/&lt;/a&gt;&#xA;which was specifically created for Linux to access o365 and exchange mailboxes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looks pretty cool but haven't had the opportunity to play with it yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It does have a cost which is very small when you take into account the user interface and work that's gone into the project - looks pretty good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there's a 7 day trial available which i'm going to try out next week to see what its like.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope the above helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G &lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2019-08-25T02:09:24.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19607" PostTypeId="2" ParentId="19603" CreationDate="2019-08-25T03:09:00.337" Score="0" Body="&lt;p&gt;are you running a spinning disk or SSD ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;normally when a machine comes back from sleep (hibernation) it needs to read all the data that was saved to disk before you can have any KB input or the system works properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this same happens on PC and MAC if they go into hibernation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hibernation is different to lets say screen off for example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;are able to provide more information on your setup specifically the HDD type and computer brand, MB type etc could also help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;are you using provider supplied drivers?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i would also recommend turning off &quot;suspend&quot; mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;applications &gt; power &gt; suspend &gt; never.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;personally i'm not seeing this issue running with a VMware fusion VM.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;for me the system suspends and then returns straight away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this could come down to the standardised drivers for virtual machines etc + on SSD drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hopefully i can be of more assistance with additional info.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2019-08-25T03:09:00.337" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19608" PostTypeId="2" ParentId="19605" CreationDate="2019-08-25T03:32:57.743" Score="0" Body="&lt;p&gt;open terminal (applications &gt; terminal &gt; )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;paste the below command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install flashplugin-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;follow the prompts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there may be security popups on your selected browser that will need to be enabled for the popup or content to be displayed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastEditorUserId="16827" LastEditDate="2019-08-26T15:55:16.177" LastActivityDate="2019-08-26T15:55:16.177" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19609" PostTypeId="2" ParentId="16757" CreationDate="2019-08-25T03:59:23.267" Score="0" Body="&lt;p&gt;Same issue on a 17&quot; MacBookPro 6.1 - Cheese works fine as well and is the best solution around to replace camera apparently&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2019-08-25T03:59:23.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19610" PostTypeId="1" CreationDate="2019-08-25T06:55:59.170" Score="0" ViewCount="232" Body="&lt;p&gt;Noob here, I installed Elementary OS Juno at first nothing happened but after a few days somehow the files permission changed to read only&#xA;&lt;a href=&quot;https://i.stack.imgur.com/idDan.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/idDan.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="12303" LastEditorUserId="15904" LastEditDate="2020-02-19T16:57:15.180" LastActivityDate="2024-03-02T14:02:30.403" Title="Files showing Lock symbol Elementary OS Juno" Tags="|release-juno|files|permissions|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="19612" PostTypeId="1" CreationDate="2019-08-25T08:55:44.327" Score="0" ViewCount="64" Body="&lt;p&gt;When I play music I send it to an AV amp using a digital out. I have an HDMI connection that has to go through the TV to the amp, and a optical on the motherboard that goes direct to the amp. The optical out is the better choice for music.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem I have is that after a random amount of time (usually at least once every 5 - 10 mins) the output device in the PulseAudio volume control changes from HD-Audio Generic Digital Stereo (IEC958) to Unknown output and the sound drops briefly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't do this went the output is set to HDMI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I trouble shoot this issue? I'm not sure if it's an Elementary problem, PulseAudio problem, or a hardware fault. Hopefully once I know the problem I can investigate a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="16805" LastActivityDate="2024-01-03T13:03:10.373" Title="Assistance required for troubleshooting digital sound output" Tags="|release-juno|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19614" PostTypeId="1" CreationDate="2019-08-25T20:52:24.470" Score="1" ViewCount="44" Body="&lt;p&gt;this is my very first time using anything other than Windows and so far I'm loving it. Everything looks very promising and it itches me to test and try it out more. But I got one little problem which is stopping me from that and that would be that, in order to write special characters like ; : ' * etc., I have to hold the shift button down. As I am being used to write those characters with the Caps Lock on, this is quite irritating and stopped me more than one time in my writing flow. Changing my layout doesn't seem to work and as I am still new to Linux I don't know what else I can do in order to just press Caps Lock, write my special character and press Caps Lock again to keep writing in an pleasant pace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: Fixed that problem myself with the help of this site.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://xahlee.info/linux/linux_shift_lock_key.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://xahlee.info/linux/linux_shift_lock_key.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've changed the behaviour of my Caps Lock button, to be a Shift Lock instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy &lt;code&gt;sudo setxkbmap -option caps:shiftlock&lt;/code&gt; in your terminal, hit enter, enter your password and your Caps Lock funtions now like a Shift Lock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But unfortunately it wouldn't stay like this after you reboot the computer. So to not always type in the same command in the terminal, I added the following command to the applications who are getting automatically as soon as I log in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to Settings -&gt; Applications -&gt; Applications who are getting automatically started when you sign in -&gt; add a Application -&gt; copy &lt;code&gt;/usr/bin/setxkbmap -option caps:shiftlock&lt;/code&gt; to where &quot;enter custom command&quot; stands -&gt; enable your custom command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With this edit I don't boast with it. I just want to help out other Linux newbies like I am one myself, so that they don't have to search a whole week for a solution like I did.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Issue: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-keyboard/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-keyboard/issues/244&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18843" LastEditorUserId="18844" LastEditDate="2019-09-03T19:16:13.233" LastActivityDate="2019-09-03T19:16:44.410" Title="How to write ( ) / ; characters with Caps Lock on?" Tags="|release-juno|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19615" PostTypeId="2" ParentId="15371" CreationDate="2019-08-25T22:19:38.553" Score="0" Body="&lt;p&gt;I have the same problem when I restart the computer from Windows into Elementary OS. No matter what I do the speakers would not work until I shut down the computer and start it again - reinstalling drivers, tuning settings - no change. Try to shut down and then check if speakers work again.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-08-25T22:19:38.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19616" PostTypeId="2" ParentId="19595" CreationDate="2019-08-25T22:23:42.677" Score="0" Body="&lt;p&gt;The only problem with my computer speakers occures when I restart the PC from Windows into EOS. If I shut down the computer - when it starts again into eOS everything works well, but if I keep restarting - there is no sound into the speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to shut it down, if you didn't already and check if it is ok when you start it again.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-08-25T22:23:42.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19618" PostTypeId="2" ParentId="19560" CreationDate="2019-08-26T09:53:34.130" Score="0" Body="&lt;p&gt;Hay How are you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can you send a screen shot of your network settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;settings &gt; network &gt; advanced &gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sounds like you have IPv6 turned on &gt; go to the ipv6 tab and change the drop down method from automatic or what ever it is to ignore &gt; save&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the IPv4 tab showing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;your DNS should be set to your internal GW (router) which is normally used for DNS internally and to the outside world.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the 127.0.0.0/24 subnet is usually used as an internal ported range and not for use on a network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what the supplied resolve.conf output is telling you is that the DNS network should use the computers internal route for DNS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does your router use DHCP to assign an IP address, GW and DNS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may have a manually set IP address in your IPv4 settings then you will need to manually set a static entry for DNS and GW.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is the case set your router as the DNS server or change to DHCP and let your computer grab an IP range from the router.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;send those screen shots and lets see what is currently setup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2019-08-26T09:53:34.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19619" PostTypeId="2" ParentId="19558" CreationDate="2019-08-26T10:02:53.330" Score="1" Body="&lt;p&gt;Hay Fred&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sounds like this issue may be related to the following problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/SquashfsErrors&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/SquashfsErrors&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;give some of the options a try on the link supplied and let us know how you go.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is that a MAC your installing on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2019-08-26T10:02:53.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19620" PostTypeId="1" AcceptedAnswerId="21038" CreationDate="2019-08-26T11:05:55.337" Score="0" ViewCount="108" Body="&lt;p&gt;As per title, turned on today my XPS 9550 and everything lags. Did not changed anything recently, just a BIOS update from the official Dell website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone experiencing this?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Well, as it came, it went away. Turn on the XPS later today and all is normal. Only thing that changed, was battery power instead of being charging/charged, no idea.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="16827" LastEditDate="2019-08-26T16:03:47.443" LastActivityDate="2020-01-14T20:14:02.533" Title="Juno is suddenly... sluggish and laggy?" Tags="|release-juno|dell|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19623" PostTypeId="1" CreationDate="2019-08-26T20:03:03.967" Score="0" ViewCount="94" Body="&lt;p&gt;I am trying to find a way to develop &lt;strong&gt;wingpanel extension&lt;/strong&gt; in &lt;strong&gt;plain C&lt;/strong&gt; code.&#xA;Every time that I asked question about app development in elementary OS, They just said that you should learn Vala language. Why should I learn Vala language when the platform for developing elementary app is GKT &amp;amp; GTK is completely written in C language &amp;amp; has C base api. So please help me. I really need this. I am really tired of learning new language &amp;amp; new build system &amp;amp; new api &amp;amp; ... .&lt;/p&gt;&#xA;" OwnerUserId="18849" LastEditorUserId="16827" LastEditDate="2019-09-03T19:38:38.757" LastActivityDate="2019-09-03T19:38:38.757" Title="How to develop wingpanel extension in plain C language?" Tags="|development|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19624" PostTypeId="1" CreationDate="2019-08-27T00:35:01.060" Score="1" ViewCount="71" Body="&lt;p&gt;i am trying elementary os again. i would like to play openarena. i would like to commend you on the state of your display settings. i am able to choose primary display and the game will start on that display! and all i did was choose it! wonderful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;There is a packaging error in the repository that causes the game to crash if you use the folder download version you are able to play&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now the problem is that i cannot actually target the correct monitor! when you start oa from repo installed version, it chooses the preferred monitor in settings and all is well until it crashes. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you're using the folder version i cannot get it to choose the monitor attached to laptop. it draws the game on built-in no matter what. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;how do you ask openarena to use the 2nd monitor? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks again for your help!&lt;/p&gt;&#xA;" OwnerUserId="18850" LastEditorUserId="18850" LastEditDate="2019-08-27T04:32:08.403" LastActivityDate="2019-08-27T04:32:08.403" Title="openarena crashes out of game when joining game" Tags="|display|graphic-drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19625" PostTypeId="2" ParentId="19612" CreationDate="2019-08-27T00:52:16.260" Score="0" Body="&lt;p&gt;i disagree optical is better for music unless your receiver is a pair of empty food cans. digital is digital. if you spdif you are trying to avoid processing on the reciever? i dont see benefit. digital is digital and conversion aside the connection over spdif or hdmi is lossless. but whatever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;your optical cable is probably junk (stepped on, dirty, etc) and dropping the digital connection due to a signal quality issue. try with new cable. i can't test because i dont use optical out anymore. this doesn't sound like a software issue since audio in linux usually 'just works'.&lt;/p&gt;&#xA;" OwnerUserId="18850" LastActivityDate="2019-08-27T00:52:16.260" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19628" PostTypeId="1" CreationDate="2019-08-27T04:42:40.927" Score="1" ViewCount="42" Body="&lt;p&gt;is this a known bug? the button in the GUI display settings that you use to turn the monitors off is non-functional for me. &lt;/p&gt;&#xA;" OwnerUserId="18850" LastActivityDate="2019-08-27T04:42:40.927" Title="Can't actually turn built-in monitor off" Tags="|display|settings|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19629" PostTypeId="2" ParentId="17976" CreationDate="2019-08-27T05:57:51.663" Score="1" Body="&lt;p&gt;it looks like there is a known bug in the current 4.15 Kernel release which Juno is running according to the below article.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2395562&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2395562&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can you post your kernel version?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;open terminal and run.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;upgrading to 4.17 for the user in the above thread seems to have resolved their issue but this is not the current stable version of the kernel for Juno for what ever reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;check out the link posted to see if this is the same or is related to your issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastEditorUserId="16827" LastEditDate="2019-09-01T17:04:18.187" LastActivityDate="2019-09-01T17:04:18.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19635" PostTypeId="2" ParentId="19623" CreationDate="2019-08-27T13:34:12.500" Score="1" Body="&lt;p&gt;Build the sample indicator and look at the generated c code.&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel/tree/master/sample&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/tree/master/sample&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/a/653413&quot;&gt;https://stackoverflow.com/a/653413&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="37" LastActivityDate="2019-08-27T13:34:12.500" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19640" PostTypeId="1" CreationDate="2019-08-28T01:13:54.433" Score="1" ViewCount="1441" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nhT5p.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nhT5p.jpg&quot; alt=&quot;New Login Screen&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well this morning my login screen was showing normal, but after a few hours working on my computer, I suspended and try to login ALL functions are good, just the display is weird, I don't know if some way I installed any dependency that required another GUI that not it's pantheon, so hope that somebody now what I got to do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Already tried &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1661/login-screen-incomplete&quot;&gt;this&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --reinstall pantheon-greeter&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But nothing seems to change...&lt;/p&gt;&#xA;" OwnerUserId="18863" LastEditorUserId="18392" LastEditDate="2019-12-24T07:46:34.793" LastActivityDate="2019-12-24T07:46:34.793" Title="Login screen showing weird" Tags="|release-juno|greeter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19641" PostTypeId="2" ParentId="19567" CreationDate="2019-08-28T07:07:21.613" Score="1" Body="&lt;p&gt;I succeed solving this issue by luis_nando's answer. What I did step-by-step:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install netext73&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ apt-add-repository ppa:netext/netext73 &amp;amp;&amp;amp; apt-get update &amp;amp;&amp;amp; apt-get install netext73&lt;/p&gt;&#xA;&#xA;&lt;p&gt;$ sudo netext73&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go through the first installation&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check Hibernate in the optimizer&lt;/p&gt;&#xA;&#xA;&lt;p&gt;found on Reddit &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/382e76/how_to_fix_cannot_wake_up_from_suspend_issue/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Solution Fix&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6792" LastActivityDate="2019-08-28T07:07:21.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19642" PostTypeId="2" ParentId="19640" CreationDate="2019-08-28T07:16:31.717" Score="3" Body="&lt;p&gt;Looks like new Login Screen (LightDM Greeter for Pantheon)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source on GitHub&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This update was pushed to Juno recently.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can edit background here &lt;a href=&quot;https://jsfiddle.net/bk6u4x29/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Fiddle&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6792" LastEditorUserId="18392" LastEditDate="2019-08-28T11:02:49.283" LastActivityDate="2019-08-28T11:02:49.283" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19643" PostTypeId="1" CreationDate="2019-08-28T12:15:49.323" Score="0" ViewCount="65" Body="&lt;p&gt;I had Windows 10 installed on my drive now I installed elementary OS on a separate partition on the same drive. Both are on EFI system. The grub menu is not showing any option to boot to Windows only elementary OS is there. I tried boot-repair but it didn't work. I also tried manually editing the 40_custom file for a windows 10 menu entry but nothing seems to work. Please help me with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Here is the pastebin link for boot-info summary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://paste.ubuntu.com/p/bspZvmZSpg/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/p/bspZvmZSpg/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18867" LastActivityDate="2019-08-29T18:15:22.653" Title="Windows 10 not showing in grub after elementary OS installation" Tags="|boot|dual-boot|grub|microsoft-windows|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19644" PostTypeId="1" CreationDate="2019-08-28T16:56:30.510" Score="1" ViewCount="51" Body="&lt;p&gt;Is there a way to revert to the previous desktop where there logon field was on the left?  I much prefer it to the newer, centered logon.&lt;/p&gt;&#xA;" OwnerUserId="18868" LastEditorUserId="16827" LastEditDate="2019-09-03T19:37:11.030" LastActivityDate="2019-09-03T19:37:11.030" Title="How to get back the previous greeter?" Tags="|release-juno|pantheon|gnome|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19645" PostTypeId="1" CreationDate="2019-08-28T18:54:15.043" Score="0" ViewCount="122" Body="&lt;p&gt;When I do an operation like&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ls -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Several results are shown with an unpleasant background color, how could I change so that this unpleasant background color changes?&lt;/p&gt;&#xA;" OwnerUserId="18395" LastActivityDate="2024-01-08T03:01:45.227" Title="How can I change the background color of the text in the terminal?" Tags="|pantheon-terminal|gnome-terminal|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19647" PostTypeId="1" CreationDate="2019-08-29T02:02:45.273" Score="0" ViewCount="167" Body="&lt;p&gt;Files stopped showing PDF thumbnails. If I remove apparmor profile or adding new, it works as expected.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# bash -c &quot;owner /tmp/tumbler-* w, &amp;gt;&amp;gt; /etc/apparmor.d/local/usr.bin.evince&quot;&#xA;# apparmor_parser -r /etc/apparmor.d/usr.bin.evince&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# apparmor_parser -R /etc/apparmor.d/usr.bin.evince&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Details of the packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apparmor    2.12-4ubuntu5.1&#xA;evince  3.28.4-0ubuntu1.2+elementary2~ubuntu5.0.1&#xA;pantheon-files  4.1.9+r3433+pkg82~ubuntu5.0.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18424" LastEditorUserId="18424" LastEditDate="2019-09-20T14:15:23.930" LastActivityDate="2019-09-20T14:15:23.930" Title="Files app not showing PDF thumbnails" Tags="|pantheon-files|files|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19650" PostTypeId="1" CreationDate="2019-08-29T09:55:15.957" Score="1" ViewCount="276" Body="&lt;p&gt;So I've just installed elementaryOS Juno again, updated everything, installed all my programs, when I noticed a weird bug, that occurs all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When closing the right-click context menu, or a drop-down menu (e.g. in LibreOffice) the shadow of the menu remains on screen, which is not too bad, but annoys me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PJXGc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PJXGc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look at the desktop next to the window. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The interesting part: When I recorded the screenshot there was also an artifact where the right-click menu can be seen, so I am guessing, that it has something to do with elementaryOS still thinking that the menu is active, therefore still drawing the shadow? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched for the problem, but only found one person with the same problem online, but no solution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe anyone here can help me to optimize my experience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Here is the related issue &lt;a href=&quot;https://github.com/elementary/gala/issues/605&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/605&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18876" LastEditorUserId="18876" LastEditDate="2019-09-02T06:21:32.823" LastActivityDate="2021-11-07T07:24:47.350" Title="Weird graphical artifacts after closing context menu" Tags="|display|graphics|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19651" PostTypeId="2" ParentId="19335" CreationDate="2019-08-29T10:10:49.460" Score="-1" Body="&lt;p&gt;Try using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wine-stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18877" LastActivityDate="2019-08-29T10:10:49.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19652" PostTypeId="2" ParentId="19605" CreationDate="2019-08-29T10:30:05.200" Score="0" Body="&lt;p&gt;this is showing the same problem for some users:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/64164/flash-player-in-epiphany&quot;&gt;https://askubuntu.com/questions/64164/flash-player-in-epiphany&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm suing FireFox for flash and probably why i haven't run into this problem as the last post in the link explains.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;NPAPI plugins are (unfortunately) no longer supported by major web&#xA;  browsers. PPAPI is the new way. Fortunately, a very good open source&#xA;  project called Freshplugin allow any browser to use flash player PPAPI&#xA;  from Chrome in Linux.It means that the last flash player update will&#xA;  be used in any browser, even epiphany. You must have Chrome installed.&#xA;  &lt;a href=&quot;https://github.com/i-rinat/freshplayerplugin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/i-rinat/freshplayerplugin&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;it may be that due to having FF installed before i installed flash its now available and working in Epiphany.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the link has multiple other fixes to try.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;let me know how you go.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2019-08-29T10:30:05.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19653" PostTypeId="2" ParentId="19645" CreationDate="2019-08-29T12:40:04.163" Score="0" Body="&lt;p&gt;It's basically because the permission of the file. Your folder has green background and blue foreground which means that dir is other-writeable(o+w) and not sticky.&#xA;If you want to know the color represent what the file type is, you can print &lt;code&gt;dircolors&lt;/code&gt; to a file, like this:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dircolors -p &amp;gt; ~/.dircolors&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Back to your problem, to change the color of that dir you can remove the write permission of the others group:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chmod -R o-w redentor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You surely want to remove the background color of all dirs inside &lt;code&gt;redentor&lt;/code&gt; too, so &lt;code&gt;-R&lt;/code&gt; helps you do that recursively. &lt;/p&gt;&#xA;" OwnerUserId="18355" LastEditorUserId="18355" LastEditDate="2019-08-31T19:00:16.900" LastActivityDate="2019-08-31T19:00:16.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19656" PostTypeId="2" ParentId="19604" CreationDate="2019-08-29T18:17:00.387" Score="1" Body="&lt;p&gt;Solution:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt remove --purge network-manager*&lt;/p&gt;&#xA;&lt;p&gt;sudo apt autoremove --purge&lt;/p&gt;&#xA;&lt;p&gt;sudo apt install --no-install-recommends network-manager network-manager-openvpn-gnome&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17099" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-08-29T18:17:00.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19658" PostTypeId="1" CreationDate="2019-08-29T18:35:48.467" Score="1" ViewCount="39" Body="&lt;p&gt;Out of nowhere the mouse on my Asus S430 has become unresponsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The mouse works just fine under Windows or during the Elementary login screen, but does not respond to movement or clicks after login. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;xinput shows the touchpad to be enabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what the problem might be?&lt;/p&gt;&#xA;" OwnerUserId="17799" LastActivityDate="2019-08-29T18:35:48.467" Title="Mouse unresponsive after login" Tags="|touchpad|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19659" PostTypeId="1" CreationDate="2019-08-29T22:17:30.377" Score="1" ViewCount="334" Body="&lt;p&gt;Based on this answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17081/sync-gnome-calendar-on-elementary-os&quot;&gt;Sync GNOME Calendar on elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;XDG_CURRENT_DESKTOP=GNOME gnome-control-center&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I was able to enable accessibility settings like Zoom, mouse keyboard, large text, and many others missing in the default ElementaryOS accessibility settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I enabled wingpanel missing icons following &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16502/missing-icons-in-the-wingpanel&quot;&gt;Missing icons in the wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still, I'm unable to show the Ubuntu accessibility menu &lt;a href=&quot;https://i.stack.imgur.com/EYK7V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EYK7V.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/55GsL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/55GsL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18878" LastEditorUserId="18878" LastEditDate="2019-08-29T22:27:21.497" LastActivityDate="2019-08-29T22:27:21.497" Title="Enable &quot;Always show Universal Access Menu&quot; in ElementaryOS 5.0 Juno taskbar" Tags="|wingpanel|menu|accessibility|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19660" PostTypeId="1" CreationDate="2019-08-30T15:30:37.010" Score="0" ViewCount="84" Body="&lt;p&gt;The only thing stopping me from switching to eOS/Linux (from macOS) is &lt;strong&gt;Outlook Categories&lt;/strong&gt; (I use O365 Exchange). Yeah, I know it sounds dumb, but it's a big deal to me because I have hundreds of email messages tagged with one or multiple custom categories so I can quickly filter out what I'm looking for. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have been unable to find an email client that supports Outlook Categories. Does one exist?&lt;/p&gt;&#xA;" OwnerUserId="18882" LastActivityDate="2019-09-01T07:45:29.763" Title="Mail app supporting O365 Categories" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19661" PostTypeId="1" CreationDate="2019-08-30T16:25:43.610" Score="0" ViewCount="107" Body="&lt;p&gt;I am not very familiar with Linux OS. I just installed elementary on my Lenovo Yoga 3 Pro Win 10.  I have 2 issues:&#xA;1. Boot option screen: you could hardly read it the options, very small characters???&#xA;2. Can't connect to internet? I don't even see or know from where to start?&#xA;Any help would be very appreciated&lt;/p&gt;&#xA;" OwnerUserId="18884" LastActivityDate="2024-01-08T07:06:35.747" Title="Wifi issues on Elementary" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19662" PostTypeId="1" CreationDate="2019-08-30T18:41:10.997" Score="0" ViewCount="35" Body="&lt;p&gt;Latest Update will not boot on my computer rejects my password. The login screen looks tiny and it keeps returning to login screen after I key in my  password. I need to do a total reinstall of the os?&lt;/p&gt;&#xA;" OwnerUserId="18865" LastActivityDate="2019-10-12T12:11:04.560" Title="Latest Update will not boot on my computer rejects my password" Tags="|updates|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19663" PostTypeId="1" CreationDate="2019-08-30T22:36:52.297" Score="0" ViewCount="103" Body="&lt;p&gt;I have a VCD with mpg files that the native Videos app does not play the video, it just shows blank screen, and no audio either. VLC player plays the same files successfully. I do see gstreamer1.0-plugins-* are installed with version 1.14.5, as these were listed as a solution in another similar question about native Video app not able to play video files that VLC player plays successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if further clarification/information on this topic is needed from my side that could help addressing this issue at hand.&lt;/p&gt;&#xA;" OwnerUserId="18886" LastActivityDate="2019-08-30T22:36:52.297" Title="Native Video app does not play mpg files from a VCD" Tags="|release-juno|applications|videos|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19665" PostTypeId="1" CreationDate="2019-08-31T15:44:20.250" Score="1" ViewCount="630" Body="&lt;p&gt;I'm trying to create a node script that will run on a keyboard command.&#xA;I added a custom keyboard shortcut:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;node /full/path/index.js&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also tried to create an executable bash script that will run the node command and it doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;bash commands run, but the node doesn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any ideas?&lt;/p&gt;&#xA;" OwnerUserId="18889" LastEditorUserId="18889" LastEditDate="2019-08-31T15:56:07.817" LastActivityDate="2019-08-31T15:56:07.817" Title="Running a Node.Js script as a custom shortcut" Tags="|release-loki|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19666" PostTypeId="2" ParentId="19665" CreationDate="2019-08-31T15:54:04.553" Score="2" Body="&lt;p&gt;Manage to solve it - make the file a node js executable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steps:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Add a node shabang to the node.js script, usually:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/env node&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2) Define custom shortcut command as the full path to the file, i.e:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/full/path/to/file/index.js&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;3) Make file executable, using chmod:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /full/path/to/file/index.js&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope it helps :)&lt;/p&gt;&#xA;" OwnerUserId="18889" LastActivityDate="2019-08-31T15:54:04.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19667" PostTypeId="2" ParentId="19661" CreationDate="2019-08-31T21:04:36.977" Score="0" Body="&lt;p&gt;Did you install Elementary using your wifi? I am new to Linux too and had an issue with connecting to the internet after installing it using my wifi. It showed up in Edit connections but I could not choose it as an option.&#xA;I solved it by using an Ethernet connection to connect to the internet (wired connection) and doing all the updates (a bit over 500 for system updates). After that the wifi showed up on the connections but did not give me an option to switch to it from wired. &#xA;It wasn't until I installed the &lt;strong&gt;optional&lt;/strong&gt; update for Broadcom 802.11 Linux Sta wireless driver source (wifi driver) that it showed up in connections and I was able to turn wired off and choose wifi and then I connected without a problem.&lt;/p&gt;&#xA;" OwnerUserId="18870" LastActivityDate="2019-08-31T21:04:36.977" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19668" PostTypeId="1" AcceptedAnswerId="20867" CreationDate="2019-08-31T22:49:40.183" Score="0" ViewCount="77" Body="&lt;p&gt;I want to set a keyboard shortcut to launch Color Picker (by Ronny Dobra from the AppCenter) but don't know what the terminal command would be for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) What command will launch Color Picker from the terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) How can I find terminal command to launch other applications I may want for the same purposes?&lt;/p&gt;&#xA;" OwnerUserId="6667" LastActivityDate="2019-10-02T16:21:07.003" Title="Color Picker terminal launch" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19669" PostTypeId="2" ParentId="19668" CreationDate="2019-09-01T07:42:49.340" Score="0" Body="&lt;p&gt;Hi have you tried just hitting the windows(super key)&#xA;then go to setting it the top right cnr&#xA;then to custom&#xA;then just add new and tell it what you want it to do &lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-09-01T07:42:49.340" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19671" PostTypeId="1" CreationDate="2019-09-01T09:14:18.530" Score="0" ViewCount="41" Body="&lt;p&gt;I am very new to Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is this : &#xA;I have installed CodeBlocks IDE from the AppCenter, and tried to compile a simple &quot;Hello World&quot; program to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After researching and looking at the output errors in CodeBlocks I found that it was a compiler RELATED issue. From that point, and looking here and there, I found here in Stack Exchange the solution was pretty simple : &#xA;All I had to do was to type into terminal : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My question is this : &#xA;How can someone determine what is missing and thus type the correct thing/title after sudo apt-get install [correct title?]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is very frustrating to install something from the AppCenter and not having it in working order. It is like getting a download from Play Store for android and finding out that it has missing files and having no real way to determime what to add/download ....&lt;/p&gt;&#xA;" OwnerUserId="16571" LastActivityDate="2019-09-02T10:39:45.090" Title="Determine Missing Files" Tags="|software-installation|appcenter|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19673" PostTypeId="1" CreationDate="2019-09-01T12:53:12.960" Score="1" ViewCount="1272" Body="&lt;p&gt;I have been using rambox for whatsapp. But is there any alternative clients which are still working?&lt;/p&gt;&#xA;" OwnerUserId="18895" LastActivityDate="2020-03-26T12:30:56.183" Title="Is there any Whatsapp messenger for elementary os?" Tags="|thirdpartyapps|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19675" PostTypeId="1" CreationDate="2019-09-01T17:12:13.347" Score="0" ViewCount="47" Body="&lt;p&gt;First i thought that I forgot the password literally, then i went to the system recovery to change the password. After changing the password the same thing is happening i.e. It is showing incorrect password. I tried logging in by pressing Ctrl+Alt+F2 and it is logging in from there but when i come back by pressing Ctrl+Alt+F7 again the same thing is happening. I even tried using the older versions of Kernel but the same issue is happening again. Somebody help. &lt;/p&gt;&#xA;" OwnerUserId="18898" LastEditorUserId="18898" LastEditDate="2019-09-02T18:25:41.193" LastActivityDate="2019-09-03T09:40:28.530" Title="Showing that Password is incorrect even though I'm typing the exact correct password" Tags="|release-juno|ubuntu|security|elementary-website|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19676" PostTypeId="2" ParentId="19673" CreationDate="2019-09-01T18:56:27.160" Score="2" Body="&lt;p&gt;The best client I found for Whatsapp only is &lt;a href=&quot;https://snapcraft.io/whatsdesk&quot; rel=&quot;nofollow noreferrer&quot;&gt;whatsdesk&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Alternatives for it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Extensions for chrome (or the browser you use). In chrome's case, there are extensions that can be installed as a system application&lt;/li&gt;&#xA;&lt;li&gt;Multiservices applications such as Rambox or Franz&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2019-09-01T18:56:27.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19678" PostTypeId="2" ParentId="19671" CreationDate="2019-09-02T10:39:45.090" Score="-1" Body="&lt;p&gt;It's not an AppCenter issue, CodeBlocks didn't works like Visual Studio which provides everything you need to build programs (linker, compiler...) out of the box. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;CodeBlocks provides just an editor and an interface but you still have to make it work for your languages of choices installing the right packages from apt and if needed CodeBlocks plug-ins.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I would advise you to ditch CodeBlocks in favour of Visual Studio Code (which is different from Visual Studio which works only on Windows and MacOS) which still needs to be prepared with the right packages and plug-ins to work properly for your language but at least is better supported and is easer to find tutorials (try to google &quot;write [your language] in Visual Studio Code&quot;) and plug-ins.&lt;/p&gt;&#xA;" OwnerUserId="18901" LastActivityDate="2019-09-02T10:39:45.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19679" PostTypeId="1" CreationDate="2019-09-02T13:56:40.593" Score="1" ViewCount="29" Body="&lt;p&gt;I deleted all the folders in /usr/share/themes/ leaving just /elementary/ and now the default theme doesn't work properly. How can I restore /usr/share/themes/?&lt;/p&gt;&#xA;" OwnerUserId="18902" LastActivityDate="2019-09-02T13:56:40.593" Title="I messed up with /usr/share/themes/" Tags="|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19682" PostTypeId="1" CreationDate="2019-09-03T01:54:59.877" Score="0" ViewCount="140" Body="&lt;p&gt;After running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;barefaced@barefaced-HP-Laptop-15-bw0xx:~$ sudo apt-get install build-essential&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; build-essential : Depends: gcc (&amp;gt;= 4:7.2) but it is not going to be installed&#xA;                   Depends: g++ (&amp;gt;= 4:7.2) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;GCC &amp;amp; G++ is not getting installed&lt;/p&gt;&#xA;" OwnerUserId="18906" LastEditorUserId="18906" LastEditDate="2019-09-03T03:05:06.900" LastActivityDate="2019-09-03T03:05:06.900" Title="GCC &amp; G++ NOT INSTALLING" Tags="|release-juno|software-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19683" PostTypeId="1" CreationDate="2019-09-03T02:11:53.583" Score="1" ViewCount="31" Body="&lt;p&gt;Elementary os boots to a black screen with recent update. Will not boot. No logo just goes to black.&lt;/p&gt;&#xA;" OwnerUserId="18865" LastActivityDate="2019-09-03T02:11:53.583" Title="Elementary os boots to a black screen with recent update" Tags="|grub|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19688" PostTypeId="2" ParentId="19673" CreationDate="2019-09-03T09:43:05.423" Score="0" Body="&lt;p&gt;If you are running Firefox you can use the whatsapp addon&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-09-03T09:43:05.423" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19689" PostTypeId="2" ParentId="3508" CreationDate="2019-09-03T14:51:03.757" Score="0" Body="&lt;p&gt;Files also uses &lt;strong&gt;evince-thumbnailer&lt;/strong&gt;. Need to disable both &lt;code&gt;[PopplerThumbnailer]&lt;/code&gt; and &lt;code&gt;[DesktopThumbnailer]&lt;/code&gt; from &lt;code&gt;/etc/xdg/tumbler/tumbler.rc&lt;/code&gt; for disable pdf's. But it's disables more than just  pdf's. To be specific, all thumbnailers under &lt;code&gt;/usr/share/thumbnailers/&lt;/code&gt; directory.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[DesktopThumbnailer]&#xA;Disabled=true&#xA;Priority=1&#xA;Locations=&#xA;MaxFileSize=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or maybe you can try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Erase &lt;code&gt;application/pdf&lt;/code&gt; from &lt;code&gt;/usr/share/thumbnailers/evince.thumbnailer&lt;/code&gt; &lt;strong&gt;MimeType&lt;/strong&gt; key.&lt;/p&gt;&#xA;" OwnerUserId="18424" LastEditorUserId="18424" LastEditDate="2019-09-20T14:07:15.523" LastActivityDate="2019-09-20T14:07:15.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19690" PostTypeId="2" ParentId="19673" CreationDate="2019-09-03T15:03:35.203" Score="1" Body="&lt;p&gt;I find a few snap packages &lt;a href=&quot;https://snapcraft.io/search?q=what&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I haven't tried any but they probably work, so why no try&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get install snapd&#xA;  sudo snap install package-name&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you install Opera Browser it got a plugins/tab (really idk what it's) but it has it by default, plus you have a &quot;free&quot; VPN service an a ad blocker. ALL by default&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ol5j2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ol5j2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18863" LastEditorUserId="18863" LastEditDate="2019-09-09T16:43:03.857" LastActivityDate="2019-09-09T16:43:03.857" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19691" PostTypeId="2" ParentId="15032" CreationDate="2019-09-03T15:05:44.250" Score="1" Body="&lt;p&gt;You always can try it manually, just follow the docs! &lt;a href=&quot;https://github.com/tomatoers/tomato&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18863" LastActivityDate="2019-09-03T15:05:44.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19694" PostTypeId="2" ParentId="17624" CreationDate="2019-09-04T00:28:52.047" Score="0" Body="&lt;p&gt;&lt;em&gt;This is a manual trick/bypass for nvidia graphics driven laptops till an official solution comes up!&lt;/em&gt;&#xA;The simple way to handle this is to press the following keys at the same time immediately you resume from suspension or lock ; &lt;strong&gt;CTRL&lt;/strong&gt; + &lt;strong&gt;ALT&lt;/strong&gt; + &lt;strong&gt;DELETE&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="18914" LastActivityDate="2019-09-04T00:28:52.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19695" PostTypeId="1" CreationDate="2019-09-04T06:37:07.350" Score="1" ViewCount="42" Body="&lt;p&gt;My main goal in two monitors is that one of them is just a dashboard, while the other has a full-screen video. I just want to be able to use plank and start menu from both the monitors.&lt;/p&gt;&#xA;" OwnerUserId="13478" LastEditorUserId="12150" LastEditDate="2019-09-07T18:36:45.840" LastActivityDate="2019-09-07T18:36:45.840" Title="Use Two monitors as main monitor" Tags="|display|plank|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19696" PostTypeId="1" CreationDate="2019-09-05T00:28:51.210" Score="0" ViewCount="59" Body="&lt;p&gt;Can anybody provide some good sources on how to install ElementaryOS on a latest gen 6-Core Macbook Pro 15? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;macOS Mojave&#xA;2,2 GhZ i7&#xA;16gb 2400 MhZ DDR4&#xA;Radeon 555x 4GB&#xA;Intel UHD 630&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any major hickups to be expected?&lt;/p&gt;&#xA;" OwnerDisplayName="user18887" LastEditorDisplayName="user18887" LastEditDate="2019-09-15T22:50:30.957" LastActivityDate="2019-09-15T22:50:30.957" Title="General Advise on how to get ElementaryOS to run on 6 Core Macbook Pro" Tags="|macbook|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19701" PostTypeId="1" CreationDate="2019-09-05T17:28:29.757" Score="3" ViewCount="559" Body="&lt;p&gt;I just today (Sept. 5 2019) installed elementary OS 5 as a virtual machine using Virtualbox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While logged in to my administrator user account, I created another &lt;strong&gt;standard&lt;/strong&gt; user account for my son.  I wanted to test the parental controls features so I turned them on for his account.  Then I proceeded to block google.com (as well as &lt;a href=&quot;https://www.google.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.google.com&lt;/a&gt;, and www.google.com) as a test.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also blocked the AppCenter, Terminal, and Epiphany browser on his account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I logged out of  myself and logged in to his account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, while logged in to his account, I was still able to open and use all three blocked apps and navigate to google.com in the Epiphany browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I logged back in to my admin user account and all of the parental control settings were still there, just as I had made them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've even shut down and restarted the instance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also updated and upgraded all packages and the OS through the terminal, so everything seems to be running properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have any idea why the parental control feature might not be working...at ALL?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone duplicate this issue?  Or are the parental control settings working for you?&lt;/p&gt;&#xA;" OwnerUserId="18927" LastEditorUserId="308" LastEditDate="2019-12-19T19:43:02.073" LastActivityDate="2019-12-19T19:43:02.073" Title="Parental Controls in elementary OS 5 not working" Tags="|settings|system|virtualbox|user|permissions|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19703" PostTypeId="1" CreationDate="2019-09-05T18:40:26.880" Score="0" ViewCount="20" Body="&lt;p&gt;How can I save photos from Mail? All I seem to be able to do is Select All. These do not show as attachments.&lt;/p&gt;&#xA;" OwnerUserId="18928" LastActivityDate="2019-09-05T18:40:26.880" Title="Saving photos from the Mail app" Tags="|pantheon|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="19705" PostTypeId="2" ParentId="10391" CreationDate="2019-09-06T10:54:16.207" Score="4" Body="&lt;p&gt;Just do &lt;code&gt;sudo apt -f install&lt;/code&gt; after this. &lt;code&gt;dpkg -i&lt;/code&gt; or &lt;code&gt;dpkg --install&lt;/code&gt; doesn't install dependencies automatically.&lt;/p&gt;&#xA;" OwnerUserId="12150" LastActivityDate="2019-09-06T10:54:16.207" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19706" PostTypeId="2" ParentId="19203" CreationDate="2019-09-06T11:41:54.527" Score="1" Body="&lt;p&gt;This feature seems to be not supported in current version of Pantheon Mail. I tested with embedded image and I can reproduce your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However the current version of Geary 3.32 supports this (via right-click). Pantheon Mail was forked from Geary, if I'm not misteaken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would consider &lt;a href=&quot;https://github.com/elementary/mail/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;reporting&lt;/a&gt; this to elementary OS developers as a bug/feature request. They could either backport it from Geary or include it in future release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the meantime you can use Geary from e.g. Flathub.org to achieve this or access the mail via web interface.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2019-09-06T11:41:54.527" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19707" PostTypeId="1" CreationDate="2019-09-06T12:01:54.383" Score="0" ViewCount="213" Body="&lt;p&gt;Is there anyone else experiencing this error when trying to load updates from the AppCenter?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages is not (yet) available (File has unexpected size (721920 != 721972). Mirror sync in progress? [IP: 202.90.159.172 80]&#xA;Hashes of expected file:&#xA; - Filesize:721972 [weak]&#xA; - SHA256:22f3325fcea25c25dad365e601ebd20fb2820aeca122a2dd4dc0ced9596329d6&#xA; - SHA1:8e47e4bf3cffbfabdfb81a25af958946143da0c0 [weak]&#xA; - MD5Sum:cefedd2648d716c724947201b9af4ad2 [weak]&#xA;Release file created at: Fri, 06 Sep 2019 08:44:28 +0000&#xA;)&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 128x128 Icons is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons is not (yet) available ()&#xA;E: http://ph.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons is not (yet) available ()&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This happens to me today when I opened the AppCenter. I was hoping that I can get updates from the packages that I installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you know any workaround for this?&lt;/p&gt;&#xA;" OwnerUserId="18931" LastActivityDate="2019-10-09T18:03:00.500" Title="Unable to update from AppCenter" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="19708" PostTypeId="2" ParentId="18697" CreationDate="2019-09-06T12:40:24.340" Score="1" Body="&lt;p&gt;The &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt; seems to provide the ability to change a category assignment of an app. You could use it to put all in the same category.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ygCfO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ygCfO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2019-09-06T12:40:24.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19709" PostTypeId="2" ParentId="14452" CreationDate="2019-09-06T13:31:26.393" Score="1" Body="&lt;p&gt;Working fine for me on Juno 5.0. Just changed key codes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gesture swipe down 3 xdotool key super+Down&#xA;gesture swipe right 3 xdotool key super+Left&#xA;gesture swipe left 3 xdotool key super+Right&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18932" LastActivityDate="2019-09-06T13:31:26.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19710" PostTypeId="1" CreationDate="2019-09-07T00:44:29.023" Score="0" ViewCount="152" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/t7SW5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t7SW5.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;I‘ve just got a Toshiba Satellite Pro C50A which came with Windows 10 pre installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I‘m installing Linux onto this laptop for a friend who‘s technophobic, schizopjrenic, and on medication. One of the main uses, if not the main use will be to watch downloaded videos and/or streaming videos.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, when I first got this laptop, there were problems with the DVD drive and it seemed that Windows 10 was making life difficult as well. The DVD drive wouldn‘t boot up from any Linux Live DVDs, although it displaed their contents on the Windows desktop. Eventually, it started ejecting all DVDs, saying “Please insert a disc“. I bought a DVD cleaner disc and cleaned it, but this made no difference. I tried to clean it again, but it just ejected the disc! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I‘ve since been given a replacement DVD RW drive by the seller. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before I fitted the replacement DVD drive I felt I had to stop Windows from starting up by pressing the Power button. I wasn‘t sure exactly what was happened with the Linux Live DVDs I was trying to boot from. This may have caused problems later. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;After fitting the new DVD drive, things improved. The DVD names and contents were displayed on the Windows desktop. However, however when I tried to boot up from any DVD it always stopped at some stage. The error messages displayed were “The disk contains an unclean file system (0,0). Metadata kept in Windows cache, refused to mount“ that the Windows NTFS file system was in a unsafe state because Windows hadn‘t closed down properly. It demanded that I restart Windows, login, then close down, not us sleep mode or hibernation. I hadn‘t done either of those things anyway! It also recommmends me running chkdsk /r . I‘ve done this, let it run for over 90 minutes, until it said it was fixed, but it made no difference! Since then, it‘s even asked to do it again, and was scheduled to take 4-5 hours, so then I just stopped it! This Windows installation has just one user account called “User“ which logs in automatically as it starts up. I don‘t know if there‘s a password. After starting up and closing down Windows I keep getting the same error message! Not only that, but there‘s another error message that won‘t go away. This says “USB read error -22“. According to another message, this is caused by unplugging a USB device without first selecting an option to safely remove it. I haven‘t even done this and don‘t know how this message can keep coming up afer so many reboots, especially before booting into Windows! &lt;/p&gt;&#xA;" OwnerUserId="18848" LastEditorUserId="18848" LastEditDate="2019-09-07T15:45:59.220" LastActivityDate="2019-09-07T15:45:59.220" Title="Problems installing Elementary OS on Toshiba Satellite Pro C50A" Tags="|system-installation|microsoft-windows|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="19711" PostTypeId="1" CreationDate="2019-09-07T10:07:21.030" Score="0" ViewCount="99" Body="&lt;p&gt;I can't get Elemetary to install on a virtual machine in Virtualbox. Somehow it doesn't want to load the .iso&lt;/p&gt;&#xA;" OwnerUserId="18939" LastActivityDate="2019-09-08T19:33:01.533" Title="How to install in Virtualbox?" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19712" PostTypeId="1" CreationDate="2019-09-07T18:29:40.023" Score="0" ViewCount="126" Body="&lt;p&gt;I hadn't updated elementaryOS for a while.&lt;/p&gt;&#xA;&lt;p&gt;My OSupdate has 29 components with update in the Appcenter.&lt;/p&gt;&#xA;&lt;p&gt;If I am in the Appcenter and click on Update, the OS asks my password and then the update cancels itself, and I don't know why.&lt;/p&gt;&#xA;&lt;p&gt;I thought, if I cannot update with the Appcenter, then I can update with Terminal. I tried following commands (from &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7490/update-with-terminal-instead-of-appcenter&quot;&gt;Update with terminal instead of AppCenter&lt;/a&gt;) :&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt update&lt;/strong&gt; : I then have in the Appcenter the following message : &amp;quot;Failed to fetch updates - This may have been caused by external, manually added software repositeries or a corrupted sources file.&amp;quot; (see the image below)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt full-upgrade&lt;/strong&gt; : E: dkpg was interrupted, you must manually run &amp;quot;sudo dkpg --configure -a&amp;quot; to resolve the problem&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get update&lt;/strong&gt; : in the Terminal I read Reading package list...done&#xA;In the Appcenter I have the same error message as with sudo apt update&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get dist-upgrade&lt;/strong&gt; : same error message as with sudo apt full-upgrade&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8JwL7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8JwL7.png&quot; alt=&quot;image description : my error with sudo apt update and sudo apt-get update&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I just hope someone knows how to deal with this. Perhaps with another command text or if I could understand the error messages and what to do with them.&lt;/p&gt;&#xA;&lt;p&gt;Anyway thanks to anyone trying to help.&lt;/p&gt;&#xA;" OwnerUserId="15258" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-09-18T08:52:52.757" Title="Unable to update (from AppCenter or Terminal)" Tags="|updates|pantheon-terminal|appcenter|sudo|" AnswerCount="0" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="19713" PostTypeId="1" AcceptedAnswerId="19720" CreationDate="2019-09-07T19:43:37.570" Score="1" ViewCount="413" Body="&lt;p&gt;I had set up Win+E to open Home folder long ago (Keyboard -&gt; Shortcuts -&gt; Applications -&gt; Home Folder). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;A rather recent update has changed the behavior from opening a new window to opening a tab in the existing Files window. This is extremely annoying for me since I have 4 monitors and use multiple desktops. Now when I use the shortcut, it changes to the desktop where it was last active.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change the behavior back to what it was before where it would open a new window on the active desktop?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you :-)&lt;/p&gt;&#xA;" OwnerUserId="8597" LastActivityDate="2019-09-09T11:13:01.903" Title="Shortcut to Open Home Folder now opens tab instead" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="19714" PostTypeId="1" CreationDate="2019-09-08T17:50:08.583" Score="0" ViewCount="233" Body="&lt;p&gt;I just came back to try out elementary os again and went for the most recent version (juno).&#xA;I wanted to install the elementary tweaks but adding the repo takes at least 5 minutes to even ask me to press the enter key and after some more time I get the error &quot;Error: retrieving gpg key timed out.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what could be the cause of this? My internet is working btw&lt;/p&gt;&#xA;" OwnerUserId="18944" LastActivityDate="2020-05-24T00:16:17.583" Title="Unable to add elementary tweaks repo (gpg key timed out)" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19715" PostTypeId="2" ParentId="19714" CreationDate="2019-09-08T18:34:41.750" Score="1" Body="&lt;p&gt;SOLVED! I only needed to disable IPV 6 (why would you need it anyway?)&lt;/p&gt;&#xA;" OwnerUserId="18944" LastActivityDate="2019-09-08T18:34:41.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19716" PostTypeId="2" ParentId="19711" CreationDate="2019-09-08T19:33:01.533" Score="1" Body="&lt;p&gt;I just recently installed Elementary in Virtualbox without an issue.  Can you share a bit more information?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where in the process are you getting stuck?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you use the Wizard to create the machine, you may have to go in and designate the ISO to run after the machine has been made.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can go into settings, and select your ISO the first time you attempt to run the Machine.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/iPTyK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iPTyK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click that little drop down and you'll be able to browse to where you've saved your ISO file.  Then try to run the machine again after you've saved your settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Give that a try.&lt;/p&gt;&#xA;" OwnerUserId="18927" LastActivityDate="2019-09-08T19:33:01.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19717" PostTypeId="1" CreationDate="2019-09-08T20:40:57.547" Score="0" ViewCount="388" Body="&lt;p&gt;I'm running Zimbra mail server on a Linux box. Thought I'd give Elementary a whirl to see if it's something my family members could use. When I ran Mail and gave it my account settings, I was prompted to trust the server (which has a self-signed certificate). After I did so, I got the message&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unable to store server trust exception&#xA;Couldn't find a place to store the pinned certificate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not quite sure how to proceed here. Seems to me there are plenty of places to store a certificate :-)&lt;/p&gt;&#xA;" OwnerUserId="18945" LastActivityDate="2024-03-19T18:06:35.793" Title="How do I get mail to trust my mail server?" Tags="|pantheon-mail|security|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19720" PostTypeId="2" ParentId="19713" CreationDate="2019-09-09T11:13:01.903" Score="3" Body="&lt;p&gt;You are right the behaviour changed - in response to issues raised by others.  What you can do is to disable your existing Application shortcut and create a Custom shortcut with the command &lt;code&gt;io.elementary.files -n ~&lt;/code&gt;.  This will always open a new window containing one tab at the Home folder.  I am not sure what the behaviour regarding where on multiiple monitors it will appear will be - that is governed by the window manager (gala) not Files.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-09-09T11:13:01.903" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19722" PostTypeId="2" ParentId="19717" CreationDate="2019-09-09T15:51:32.330" Score="0" Body="&lt;p&gt;If you are using a Gmail account, you gotta  active an option that makes you free to login in any external app from Gmail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just go to GMAIL Main page &gt; Settings &gt; Fowarding and POP/IMAP&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you are here in Fowarding and POP/IMAP&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Enable IMAP&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Hope that works your u, it work in my case.&lt;/p&gt;&#xA;" OwnerUserId="18863" LastActivityDate="2019-09-09T15:51:32.330" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19723" PostTypeId="2" ParentId="19707" CreationDate="2019-09-09T16:03:21.570" Score="1" Body="&lt;p&gt;Probably be the mirror from your packages, I usually setup to the us servers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just go to /etc/apt&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you are here just open the file &lt;strong&gt;source.list&lt;/strong&gt;, No the one that it's source.list.d&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or you can do it via terminal, using any text editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nano&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo nano /etc/apt/source.list&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Atom&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo atom /etc/apt/source.list&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Now you will see all the apt link that Elementary use download the updates&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;deb &lt;a href=&quot;http://ph.archive.ubuntu.com/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ph.archive.ubuntu.com/ubuntu/&lt;/a&gt; bionic main restricted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Now just change the region from ph to any other, in this case us&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;deb &lt;a href=&quot;http://us.archive.ubuntu.com/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://us.archive.ubuntu.com/ubuntu/&lt;/a&gt; bionic main restricted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Hopefully this works, maybe it's a little bit slower but you can try another servers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check the mirror list &lt;a href=&quot;https://launchpad.net/ubuntu/+archivemirror&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18863" LastActivityDate="2019-09-09T16:03:21.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19727" PostTypeId="1" CreationDate="2019-09-10T17:12:32.947" Score="0" ViewCount="258" Body="&lt;p&gt;If I install elementary OS, where should I get &lt;a href=&quot;/questions/tagged/wifi&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;wifi&amp;#39;&quot; rel=&quot;tag&quot;&gt;wifi&lt;/a&gt; &lt;a href=&quot;/questions/tagged/sound&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;sound&amp;#39;&quot; rel=&quot;tag&quot;&gt;sound&lt;/a&gt; and other drivers for my laptop to make these work? I want to delete Windows 10 completely.&lt;/p&gt;&#xA;" OwnerUserId="18965" LastEditorUserId="16827" LastEditDate="2019-09-19T21:28:56.680" LastActivityDate="2019-09-19T21:28:56.680" Title="Where do I find drivers for elementary OS?" Tags="|system|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="19728" PostTypeId="2" ParentId="19727" CreationDate="2019-09-10T17:27:01.507" Score="1" Body="&lt;p&gt;Difficult to say without knowing what your laptop is. You could look up how compatible your laptop is with ubuntu 18.04, or install elementary on a flash drive and boot your laptop from it to see if everything works.&lt;/p&gt;&#xA;" OwnerDisplayName="user18379" LastActivityDate="2019-09-10T17:27:01.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19731" PostTypeId="1" AcceptedAnswerId="19733" CreationDate="2019-09-10T21:22:44.943" Score="0" ViewCount="443" Body="&lt;p&gt;I'm installing elementary OS Juno on a new ThinkPad X1 Yoga (4th Gen) with an Intel i7-8665U.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm able to boot Ubuntu 18.04.3, but I'm not able to boot the latest elementary OS Juno ISO image. I presumably need the latest HWE kernel and firmware images that are available in the repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I build a custom ISO of Juno with updated packages?&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2019-09-11T00:34:47.860" Title="How Do I Build an elementary OS ISO Manually?" Tags="|release-juno|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="19733" PostTypeId="2" ParentId="19731" CreationDate="2019-09-11T00:34:47.860" Score="0" Body="&lt;p&gt;I found a tool called Cubic (&lt;a href=&quot;https://www.techrepublic.com/article/how-to-create-a-custom-ubuntu-iso-with-cubic/&quot; rel=&quot;nofollow noreferrer&quot;&gt;article here&lt;/a&gt;) that enabled me to build an ISO based on the current elementary OS Juno ISO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It can be installed like so:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cubic-wizard/release&#xA;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 6494C6D6997C215E&#xA;sudo apt update&#xA;sudo apt install cubic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once installed, start Cubic and it will walk you through taking an existing ISO image, extracting it into a directory, opening a chroot shell inside of it, where you can upgrade packages, and then from there it helps package everything back up into an ISO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can now boot into the elementary OS Juno Live CD on my new hardware.&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2019-09-11T00:34:47.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20733" PostTypeId="2" ParentId="15110" CreationDate="2019-09-11T15:41:40.320" Score="1" Body="&lt;p&gt;Can you boot from live distro? If yes, download gparted, delete the entire partition (dont format it, let this to ubuntu), then reboot. The Ubuntu instalation wizard must start. Take a look at your BIOS if theres a place for you to change the secure boot mode(i think) to UEFI, mine is set to CMOS and UEFI for ex, my notebook sometimes doesnt let me change the boot device too and its because: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) the USB ISO installation failed and I have to reburn it, even if the app said everything was right&lt;br&gt;&#xA;2) I have to change my secure boot to CMOS and UEFI &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But as someone said, eOS is based on ubuntu, maybe try Ubuntu 19.xx (eOS is based on 18.04).  &lt;/p&gt;&#xA;" OwnerUserId="18966" LastActivityDate="2019-09-11T15:41:40.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20734" PostTypeId="1" CreationDate="2019-09-11T17:15:43.300" Score="0" ViewCount="192" Body="&lt;p&gt;I've been toying with Unix &amp;amp; Linux since Mandrake, but always gave up.  Now committed to using something other than Windows as a daily driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like what I see with EOS Live these past few days and want to install on 16Gb/256Gb X1 Carbon.  Planning on single boot with whole drive encrypted, however, I have to have a Win10 VM, and would like to install other VMs (Kali, Whonix and other distros) along with containers for experimentation and learning.  Based upon my hardware config and use case, what would be ideal partitioning?  TIA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ian C&gt;&lt;/p&gt;&#xA;" OwnerUserId="18977" LastActivityDate="2019-10-13T10:01:50.253" Title="Elementary OS pre-install question from perennial Linux newbie: partition scheme" Tags="|release-juno|hardware|lenovo|virtualization|thinkpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20736" PostTypeId="1" CreationDate="2019-09-12T00:35:28.987" Score="0" ViewCount="243" Body="&lt;p&gt;I entered my FastMail credentials into online accounts and it appears that my account is synced to the Mail app. But when I open Mail I still get a prompt to enter my credentials. What's the story?&lt;/p&gt;&#xA;" OwnerDisplayName="user18379" LastActivityDate="2020-04-30T07:24:52.910" Title="FastMail account and Online Accounts" Tags="|release-juno|pantheon-mail|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20740" PostTypeId="1" CreationDate="2019-09-12T19:23:03.537" Score="0" ViewCount="138" Body="&lt;p&gt;bit of a newbie to this, good at tinkering and following instructions, but by no means technical.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm getting the following error in the AppCenter&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release' does not have a Release file.W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use. W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any advice gratefully received.&lt;/p&gt;&#xA;" OwnerUserId="18986" LastEditorUserId="16827" LastEditDate="2019-09-18T08:59:21.773" LastActivityDate="2019-10-18T10:02:20.323" Title="Error in AppCenter" Tags="|updates|appcenter|repositories|" AnswerCount="1" CommentCount="2" ClosedDate="2019-10-19T03:48:36.353" ContentLicense="CC BY-SA 4.0" />
  <row Id="20741" PostTypeId="2" ParentId="18983" CreationDate="2019-09-12T20:03:42.323" Score="1" Body="&lt;p&gt;Same here. Removing gksudo and gksu totally sucks if there is no consistent replacement.&#xA;I tried every manual on the net. For ubuntu pkexec works, since they are in nautilus,&#xA;but in elementary juno we are  SCR3WED...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Where in other distributions people are succesful, for elementary os juno NOT ANY forum idea to launch XAMPP via a desktop file will work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The location of the desktop file: ~/.local/share/applications/file.desktop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried:&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;&#xA;Encoding=UTF-8&#xA;&#xA;Name=XAMPP Control Panel&#xA;&#xA;Comment=Start and Stop XAMPP&#xA;&#xA;Exec=pkexec /opt/lampp/manager-linux-x64.run&#xA;&#xA;Icon=/opt/lampp/htdocs/favicon.ico&#xA;&#xA;Categories=Application&#xA;&#xA;Type=Application&#xA;&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;update the desktop files by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No results, so I started going trough ubuntu forums, trying alternatives.&#xA;Taking very much time.&#xA;In total, my attempts for the Exec= line: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gksu /opt/lampp/manager-linux-x64.run&#xA;sudo -c bash '/opt/lampp/manager-linux-x64.run'&#xA;pkexec /opt/lampp/manager-linux-x64.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;None of these work in juno! I spend 2 hours debugging my .desktop file, in the end I found a good soul that posted this command at a forum:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;grep '^Exec' file.desktop | tail -1 | sed 's/^Exec=//' | sed 's/%.//' | sed 's/^&quot;//g' | sed 's/&quot; *$//g'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running this you can run file.desktop via terminal so at least you can see what happens. It gives all errors your script will go trough in the terminal, so at least you are a step further. But what really happens: Nothing!... To find you script is ok, but elementary support is crap.&#xA;Ubuntu cuts out gksu, Debian daughter distribution developers are depending on it, there is no solution for practical consequenses and the user is SCR3WED.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is that what linux is all about.&#xA;The poster of this question asked his question 4 months ago, and there is no solution yet for an common used application like XAMPP.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Comon guys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way people are forced to attempt to force-install gksudo packages from an older kernel in this new architecture o.s. Which is asking for other problems, but users need a solution so who can blame them.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because I am crazy I tried it. Install gksudo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://archive.ubuntu.com/ubuntu/pool/main/libg/libgtop2/libgtop-2.0-10_2.32.0-1_amd64.deb&#xA;&#xA;sudo dpkg -i libgtop-2.0-10_2.32.0-1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://archive.ubuntu.com/ubuntu/pool/universe/libg/libgksu/libgksu2-0_2.0.13~pre1-6ubuntu8_amd64.deb&#xA;&#xA;sudo dpkg -i libgksu2-0_2.0.13~pre1-6ubuntu8_amd64.deb&#xA;&#xA;sudo apt -f install -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;(needs: sudo apt -f install -y to fix dependencies)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;wget http://archive.ubuntu.com/ubuntu/pool/universe/g/gksu/gksu_2.0.2-9ubuntu1_amd64.deb&#xA;&#xA;sudo dpkg -i gksu_2.0.2-9ubuntu1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Tried to config my file.desktop Exec= line again to gksudo and gksu.&#xA;It simply doesn't work. A terminal icon comes up in the pantheon taskbar (panel)&#xA;and hangs for 10 seconds and disappears again. Same result.&#xA;But when I tried the debug command again:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;( in  ~/.local/share/applications/file.desktop )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;grep '^Exec' file.desktop | tail -1 | sed 's/^Exec=//' | sed 's/%.//' | sed 's/^&quot;//g' | sed 's/&quot; *$//g'&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It DID open the gksudo command prompt!&#xA;Why, I don't now. This is the most frustrating one of all.&#xA;It is a great thing John Mcenroe isn't a elementary OS juno user.&lt;/p&gt;&#xA;" OwnerUserId="18987" LastEditorUserId="16827" LastEditDate="2019-09-18T08:48:39.833" LastActivityDate="2019-09-18T08:48:39.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20744" PostTypeId="2" ParentId="20734" CreationDate="2019-09-13T09:03:25.983" Score="1" Body="&lt;p&gt;Depends on what you're planning to do with your Windows virtual machine, because Windows normally can't see Linux (ext4-formatted) drives and work with them. &#xA;So if you don't plan to heavily exchange files between elementary OS (or any other Linux-based virtual machine) and Windows VM, and keep all Windows user files inside Windows virtual disk, you can go with two partitions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Partition 1 (for swap): 16 GB&lt;/li&gt;&#xA;&lt;li&gt;Partition 2 (for elementary OS and user files, ext4-formatted): all the remaining space, i.e. 240 GB. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;In case you're planning to exchange files between any Linux OS and Windows VM, you can go with three partitions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Partition 1 (for swap): 16 GB&lt;/li&gt;&#xA;&lt;li&gt;Partition 2 (for elementary OS and user files, ext4-formatted): 120 GB &lt;/li&gt;&#xA;&lt;li&gt;Partition 3 (for file exchange with Windows, NTFS-formatted): 120 GB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;(Obviously, the more files you need to exchange with Windows, the bigger partition 3 should be.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-13T09:03:25.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20745" PostTypeId="1" CreationDate="2019-09-13T11:37:40.517" Score="2" ViewCount="256" Body="&lt;p&gt;I'm relatively new to Linux distros, and my first shot at it was Elementary OS Loki. I installed it to my old PC with no hitches. It was an old i3, and a GTX 1050.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, now, I installed Elementary OS Juno to my new laptop; an HP 14s that has a Ryzen 3 3200U, a dedicated Radeon 530, an integrated Radeon Vega 3, and 4GB of RAM. I used Rufus to write the ISO into a bootable USB. When I booted it up for installation, &lt;strong&gt;I couldn't get past the splash, so I typed in nomodeset.&lt;/strong&gt; I got past the splash, and into a low-res installation desktop. I installed the OS, and everything went swell until it finished and I rebooted only to find that I still couldn't get past the splash screen unless I type in nomodeset. And when I did type it in, &lt;strong&gt;the desktop had no other resolution but 1024x768. My laptop monitor has a resolution of 1366x768.&lt;/strong&gt; &lt;strong&gt;xrandr doesn't work&lt;/strong&gt; because the monitor shows up as unknown and I just recently discovered that &lt;strong&gt;nomodeset disables Radeon&lt;/strong&gt;. How do I fix this?&lt;/p&gt;&#xA;" OwnerUserId="18994" LastActivityDate="2019-09-13T11:37:40.517" Title="Elementary OS Problems: Installation, Resolution and Graphics" Tags="|graphics|resolution|amd|radeon|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20748" PostTypeId="1" CreationDate="2019-09-15T01:58:22.083" Score="0" ViewCount="77" Body="&lt;p&gt;I've just completed a fresh install of 5.0 from the ISO on the website, but am unable to update/upgrade packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Trying to run &lt;code&gt;sudo apt update&lt;/code&gt;, or install anything from the AppCentre both result in the following error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;E: The repository 'http://packages.elementary.io/appcenter juno Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This seems to be the same issue as in this page:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16469/juno-sources-no-release-file&quot;&gt;Juno sources - no release file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm about to try following those instructions to resolve it, but thought I'd post an update that this is still an issue. Unable to install software on a fresh install seems like a rather critical bug to fix from a user experience point of view...&lt;/p&gt;&#xA;" OwnerUserId="19002" LastActivityDate="2019-10-16T08:01:15.147" Title="Fresh Juno install can't update/install any packages" Tags="|release-juno|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20749" PostTypeId="2" ParentId="20740" CreationDate="2019-09-15T08:21:46.743" Score="1" Body="&lt;p&gt;The repository '&lt;a href=&quot;http://ppa.launchpad.net/versable/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/versable/&lt;/a&gt; is a supplementary PPA for older versions of elementary OS (Luna, as stated on the PPA's &lt;a href=&quot;https://launchpad.net/~versable/+archive/ubuntu/elementary-update&quot; rel=&quot;nofollow noreferrer&quot;&gt;page&lt;/a&gt;). However, when your system tries to get updates from this PPA, it can't find release files for your OS version there. Possible solutions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;remove this supplementary (obsolete?) PPA from your system list:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ppa-purge ppa:versable/elementary-update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and get updates (if these are still being supplied) via official elementary OS PPA (ask the developers, which PPA is the official PPA for elementary OS 0.4.1 Loki) &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;or maybe instead&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install newer version of elementary OS (5.0, Juno).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-15T08:21:46.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20750" PostTypeId="1" CreationDate="2019-09-15T14:03:10.677" Score="1" ViewCount="281" Body="&lt;p&gt;i upgraded my system this morning and i found with the surprise that the pantheon-greeter oldder has been updated in the oficial Juno version for the new style for lock screen. This is awesome, but sincerelly i prefer the style for the first greeter, mainly for the full screen background, for this reason, i like to come back to the previous pantheon-greeter if this is possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like say that the new style of pantheon greeter is great, but i prefer a full screen background in the lock screen, i don't know if this can be modified in the new greeter, or how can change the pantheon-greeter to Loki version. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thanks very much for yours answers, and i'm sorry for my short english.&lt;/p&gt;&#xA;" OwnerUserId="19003" LastActivityDate="2020-03-08T15:01:20.297" Title="How to come back to oldder pantheon greeter on my elementaryOS Juno" Tags="|release-juno|updates|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20752" PostTypeId="1" CreationDate="2019-09-15T19:26:51.520" Score="0" ViewCount="107" Body="&lt;p&gt;the other day I decided to run some updates to software and the OS from the App Center and it broke my system somehow. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only odd thing I noticed regarding the updates before it crashed was that a prompt to add a password to UEFI Secure Boot popped up which I closed out of without entering one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to me the updates froze during install and the system froze and crashed. After that, I could not get back in. The OS seems to boot, but it boots to a blank (black) login screen. When I enter my password, it looks as if it will work and then goes back to the login screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to set: &quot;nomodeset&quot; to the grub but am unsure if I did it right. I really don't want to reinstall the OS because it was so stable before and I have a ton of data saved to it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Specs:&#xA;MSI GS63 &#xA;i7-6700hq&#xA;Nvidia GTX 1060&#xA;16 GB Ram&#xA;128 SSD+ 1tb hdd&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are an example of the error messages I received when digging into recovery mode/ different kernels, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2EHkh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2EHkh.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ufLS1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ufLS1.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BYZTg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BYZTg.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/psS85.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/psS85.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Swiy6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Swiy6.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19005" LastEditorUserId="19005" LastEditDate="2019-09-17T05:45:21.820" LastActivityDate="2019-09-17T05:45:21.820" Title="Elementary OS 4 Loki Black Screen on Boot/Login After Updates" Tags="|updates|boot|nvidia|uefi|secure-boot|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20753" PostTypeId="2" ParentId="10186" CreationDate="2019-09-16T00:37:18.790" Score="0" Body="&lt;pre&gt;&lt;code&gt;xrandr --output eDP-1 --scale 1x1 --pos 0x0 --fb 7680x2160; xrandr --output DP-1-1 --scale 2x2 --pos 3840x0 --mode 1920x1080 --fb 7680x2160 --pos 3840x0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That did the trick for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Had to run &quot;xrandr&quot; only first to identify the names of the displays. eDP-1 was my laptop (4k Dell touch panel), and DP-1-1 was the HDMI output from my docking station.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Scale 1x1 in the laptop with 0x0 position and 7680x2160 of frame buffer, and then 2x2 scale on the 2nd display starting at 3840x0.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastEditorUserId="16827" LastEditDate="2019-09-18T08:45:25.577" LastActivityDate="2019-09-18T08:45:25.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20754" PostTypeId="2" ParentId="20748" CreationDate="2019-09-16T07:39:02.783" Score="1" Body="&lt;p&gt;After executing &lt;code&gt;sudo apt update&lt;/code&gt; I see this line in terminal's output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;http://packages.elementary.io/appcenter bionic InRelease&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;instead of&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;http://packages.elementary.io/appcenter juno Release&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As my system doesn't have any issues with updates, you could try to swap the lines and see if it helps. (If it doesn't, just revert the process and try other solutions.) &lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-16T07:39:02.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20756" PostTypeId="1" CreationDate="2019-09-16T15:46:22.700" Score="0" ViewCount="55" Body="&lt;p&gt;I got this code when I open the appcenter. I recently dabbled in installing python stuff so might be connected to it. Also, when I ran sudo apt-update, this came out : &lt;a href=&quot;https://pastebin.com/nVGmnK29&quot; rel=&quot;nofollow noreferrer&quot;&gt;Error Message&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19012" LastActivityDate="2019-09-16T18:14:07.567" Title="Error with appcenter likely connected with python" Tags="|appcenter|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20757" PostTypeId="2" ParentId="20756" CreationDate="2019-09-16T18:14:07.567" Score="1" Body="&lt;p&gt;I had the same issue and for me reinstalling apt_pkg work it, try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall python3-apt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18966" LastActivityDate="2019-09-16T18:14:07.567" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20761" PostTypeId="1" AcceptedAnswerId="20806" CreationDate="2019-09-17T12:58:03.413" Score="1" ViewCount="31" Body="&lt;p&gt;I was thinking of contributing to some translation to Norwegian. The problem is that it's impossible for me to create an account at the elementary weblate site. When I try to create an account, I never receive a confirmation email. When I click the &quot;Report an issue with registration&quot; button, I just get a server error message after filling out the form. I tried a month ago as well, and this still hasn't been fixed. What can I do?&lt;/p&gt;&#xA;" OwnerUserId="18985" LastActivityDate="2019-09-23T22:27:21.633" Title="Issues with translation contribution" Tags="|translation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20763" PostTypeId="1" CreationDate="2019-09-17T16:49:26.620" Score="1" ViewCount="42" Body="&lt;p&gt;elementary OS 5 Juno with the 4.15.0-58-generic #64-Ubuntu kernel is installed on my laptop. However, popular hot keys (such as &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;C&lt;/kbd&gt; and  &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;V&lt;/kbd&gt;) do not work in PHPStorm 2019.2.1 and 2019.2.2, whereas they do work in Ubuntu 18.04 LTS. &lt;a href=&quot;https://snapcraft.io/phpstorm&quot; rel=&quot;nofollow noreferrer&quot;&gt;PHPStorm&lt;/a&gt; is installed via Snap. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How may I resolve this?&lt;/p&gt;&#xA;" OwnerUserId="19022" LastEditorUserId="16827" LastEditDate="2019-09-24T06:05:11.320" LastActivityDate="2019-09-24T06:05:11.320" Title="Hotkeys in PHPStorm don't work" Tags="|release-juno|keyboard-layout|java|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20764" PostTypeId="1" AcceptedAnswerId="20765" CreationDate="2019-09-18T01:55:23.790" Score="0" ViewCount="854" Body="&lt;p&gt;When I was configuring grub, I found out that I have multiple linux image, like this,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Lu3Oe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Lu3Oe.png&quot; alt=&quot;configure grub&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked with &lt;code&gt;uname -r&lt;/code&gt; command, it showed &lt;code&gt;4.15.0-62-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And then i checked on my &lt;code&gt;/boot&lt;/code&gt; directory with &lt;code&gt;ls -l&lt;/code&gt;, and the result is,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/egs3g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/egs3g.png&quot; alt=&quot;/boot directory&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My questions are,&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Do I have multiple linux (elementary OS) ?.&lt;/li&gt;&#xA;&lt;li&gt;And if so, How to remove the duplicate ?.&lt;/li&gt;&#xA;&lt;li&gt;Why when i checked with &lt;code&gt;uname -r&lt;/code&gt; it's not showing the latest version (...-62) instead of (...-64)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19024" LastEditorUserId="16827" LastEditDate="2019-09-19T21:35:10.867" LastActivityDate="2019-09-19T21:35:10.867" Title="Why do I have multiple linux image? How to remove one?" Tags="|grub|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20765" PostTypeId="2" ParentId="20764" CreationDate="2019-09-18T07:33:05.400" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;No, you don't. (You have as many Linux operating systems, as you have system root directories, which are usually marked with a forward slash, &lt;code&gt;/&lt;/code&gt;.) The items in the list are not different operating systems, but different Linux kernel version images, available to your OS.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;On how to remove older kernel versions, refer to &lt;a href=&quot;https://askubuntu.com/questions/2793/how-do-i-remove-old-kernel-versions-to-clean-up-the-boot-menu&quot;&gt;this post&lt;/a&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For some reason, newer kernel version hasn't been properly installed. (Despite newer kernel (.64) being available, your system still uses older version (.62). Try:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade &amp;amp;&amp;amp; sudo apt autoremove&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-18T07:33:05.400" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20766" PostTypeId="1" AcceptedAnswerId="20771" CreationDate="2019-09-18T23:55:13.180" Score="0" ViewCount="174" Body="&lt;p&gt;I have deleted all my elementary OS PPA due to some errors. I want to add those again. I have deleted update, security and all the PPAs of elementary OS.&lt;br&gt;&#xA;PLEASE HELP ME!!!!!&lt;/p&gt;&#xA;" OwnerUserId="19019" LastEditorUserId="16827" LastEditDate="2019-09-19T21:31:42.853" LastActivityDate="2019-09-19T21:31:42.853" Title="How to re add elementary OS PPAs?" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20767" PostTypeId="2" ParentId="18383" CreationDate="2019-09-18T23:56:45.883" Score="-1" Body="&lt;p&gt;TRY using USB tethering from mobile phone&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use your phone to share network connection to your laptop with USB Tethering mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Plug your phone USB cable to a USB port on your laptop, then go to&#xA;Settings -&gt; Connection &amp;amp; Sharing(Depends on phone model) -&gt; USB Tethering, then turn on USB tethering. You should be able to work on your laptop with internet access this way&lt;/p&gt;&#xA;" OwnerUserId="19019" LastEditorUserId="14870" LastEditDate="2020-01-06T19:10:59.380" LastActivityDate="2020-01-06T19:10:59.380" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20768" PostTypeId="1" CreationDate="2019-09-19T01:51:43.573" Score="0" ViewCount="36" Body="&lt;p&gt;I cannot or the operating system cannot find my wireless network. Clicking on the network icon only shows the wired connection. How do I get my wireless network connected? Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="19028" LastActivityDate="2019-09-19T01:51:43.573" Title="Does not pick up my wireless network" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20769" PostTypeId="1" CreationDate="2019-09-19T02:59:00.030" Score="0" ViewCount="130" Body="&lt;p&gt;After the most recent system update, I noticed the problem both on Loki and Juno as well as Juno beta that I both still have installed on my machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Juno, there's also some display issues, flashing with patterns, from time to time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The mouse cursor displays stable in pointer mode as a vertical dashed line of white dots with a shadow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A similar issue is described &lt;a href=&quot;https://bugs.freedesktop.org/show_bug.cgi?id=33183&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, even including a snapshot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: upon rebooting, the whole screen was tiled to the left 3/4 // 1/4 on Juno &amp;amp; Juno beta, and the system is not accessible anymore in that appearance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update 2: upon resume from suspend, if no BSD, the systems resumes with the display in order, but that situation doesn't last for long.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2019-09-22T11:47:31.830" LastActivityDate="2024-02-12T01:04:25.537" Title="MacBook Pro 8.3 Elementary OS Loki and Juno: mouse cursor turns into thin vertical dashed line after update" Tags="|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20771" PostTypeId="2" ParentId="20766" CreationDate="2019-09-19T07:28:43.067" Score="1" Body="&lt;p&gt;Here's the list of stock PPA that came with elementary OS 5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add these lines to your &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add this to your &lt;code&gt;/etc/apt/sources.list.d/appcenter.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://packages.elementary.io/appcenter bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add this to your &lt;code&gt;/etc/apt/sources.list.d/elementary.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add this to your &lt;code&gt;/etc/apt/sources.list.d/patches.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-19T07:34:06.450" LastActivityDate="2019-09-19T07:34:06.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20772" PostTypeId="1" CreationDate="2019-09-19T11:37:05.020" Score="0" ViewCount="2900" Body="&lt;p&gt;Can anyone please send me default files of elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list&lt;br/&gt;&#xA;/etc/apt/sources.list.d/appcenter.list&lt;br/&gt;&#xA;/etc/apt/sources.list.d/elementary.list&lt;br/&gt;&#xA;/etc/apt/sources.list.d/patches.list&lt;br/&gt;&lt;/p&gt;&#xA;" OwnerUserId="19019" LastEditorUserId="16827" LastEditDate="2020-01-01T06:02:50.247" LastActivityDate="2020-01-01T06:02:50.247" Title="Default source files needed" Tags="|default|sources|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20775" PostTypeId="1" CreationDate="2019-09-19T16:24:28.780" Score="0" ViewCount="354" Body="&lt;p&gt;PLEASE HELP ME!.&#xA;I cant login.&#xA;Even I typed correct password it shows wrong. &#xA;I tried using recovery tools.&#xA;Even i tried changing lightdm to sddm.&#xA;Every thing goes vein.&#xA;Please help.&lt;/p&gt;&#xA;" OwnerUserId="19019" LastActivityDate="2022-12-19T17:01:30.287" Title="Login password not working (correct pass)" Tags="|boot|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="20782" PostTypeId="2" ParentId="18741" CreationDate="2019-09-21T02:30:19.330" Score="0" Body="&lt;p&gt;I have The Same Issue But Go Here For A Fix  &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/5h1y4k/eos_on_hp_stream_14/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/5h1y4k/eos_on_hp_stream_14/&lt;/a&gt;   &lt;/p&gt;&#xA;" OwnerUserId="19038" LastActivityDate="2019-09-21T02:30:19.330" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20783" PostTypeId="1" CreationDate="2019-09-21T07:40:29.307" Score="0" ViewCount="215" Body="&lt;p&gt;When I run the command tail &lt;code&gt;tail /var/log/syslog.1&lt;/code&gt;, this error pops up:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Sep 21 08:09:52 michael-pc io.elementary.cerbere.desktop[2091]: [00007ff48401b430] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I had tried googling the problem but it seems like I am the only one who has this problem. I suspect this is the main reason why my log files' size is large.&lt;/p&gt;&#xA;" OwnerUserId="19039" LastActivityDate="2024-01-14T02:02:50.370" Title="My syslog files have a file size of 71.7 GB" Tags="|filesystem|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20787" PostTypeId="1" CreationDate="2019-09-21T13:11:18.040" Score="0" ViewCount="1265" Body="&lt;p&gt;I am trying to run Netflix on Firefox, it's just not running. No specific error message too. What can be going wrong? Any idea?&lt;/p&gt;&#xA;" OwnerUserId="18712" LastActivityDate="2019-09-23T20:37:39.820" Title="Having trouble running Netflix on Elementary!" Tags="|applications|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20788" PostTypeId="1" CreationDate="2019-09-21T17:10:06.887" Score="5" ViewCount="247" Body="&lt;p&gt;I just got the new greeter update. And at first I thought it was error or something got installed under the hood. Then I found this blog post, so I know it isn't an error at least.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.elementary.io/say-hello-to-the-new-greeter/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.elementary.io/say-hello-to-the-new-greeter/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I really do not like this new design. Specifically the tiny box of detail, lost in a field of dull gray. I do not want to overload this question with my opinions however, so moving on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to go back to the old style? Or at least have a background or something?&lt;/p&gt;&#xA;" OwnerUserId="19042" LastEditorUserId="308" LastEditDate="2019-12-06T06:52:20.950" LastActivityDate="2019-12-10T06:37:29.443" Title="How can I change the login screen back to a fullscreen wallpaper?" Tags="|release-juno|greeter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20791" PostTypeId="1" AcceptedAnswerId="20792" CreationDate="2019-09-21T23:02:17.220" Score="0" ViewCount="1737" Body="&lt;p&gt;I'm new in Linux world but I really like It.&#xA;Recently i tryed to install a game named &quot;clone Hero&quot; you can find here &lt;a href=&quot;https://clonehero.net/releases/v0.22.5/#&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://clonehero.net/releases/v0.22.5/#&lt;/a&gt;&#xA;I can't understand how to install the tar.gz file.&#xA;I've extract all, but in terminal I can't proceed the ./config command ...can anyone help me please??&lt;/p&gt;&#xA;" OwnerUserId="19047" LastActivityDate="2022-04-17T21:37:52.443" Title="Problem installing &quot;Clone Hero&quot;" Tags="|games|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20792" PostTypeId="2" ParentId="20791" CreationDate="2019-09-22T05:23:42.587" Score="0" Body="&lt;p&gt;To extract files from .tar.gz archive in Files browser, right-click the archive and select &lt;code&gt;Extract Here&lt;/code&gt; menu item.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To run &lt;code&gt;clonehero&lt;/code&gt; in elementary OS, first you need to set Execute permission for its executable:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;in Files, go to the extracted folder (&lt;code&gt;clonehero-linux&lt;/code&gt;);&lt;/li&gt;&#xA;&lt;li&gt;select &lt;code&gt;clonehero&lt;/code&gt; executable, right-click it and click &lt;code&gt;Properties&lt;/code&gt; menu item;&lt;/li&gt;&#xA;&lt;li&gt;in the dialog window, press &lt;code&gt;Permissions&lt;/code&gt; tab;&lt;/li&gt;&#xA;&lt;li&gt;press &lt;code&gt;Execute&lt;/code&gt; button in &lt;code&gt;Owner&lt;/code&gt; row;&lt;/li&gt;&#xA;&lt;li&gt;close the window and double-click &lt;code&gt;clonehero&lt;/code&gt; executable.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-22T19:33:56.307" LastActivityDate="2019-09-22T19:33:56.307" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="20793" PostTypeId="2" ParentId="19562" CreationDate="2019-09-22T05:38:48.970" Score="0" Body="&lt;p&gt;Concerning your scanner. When running commands in Terminal, exclude hashtag symbol (#) from your command lines. For example, instead of:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#/etc/init.d/udev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;enter and run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/init.d/udev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Try and see if your system sees the scanner.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-22T05:38:48.970" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="20794" PostTypeId="2" ParentId="20769" CreationDate="2019-09-22T11:23:28.110" Score="0" Body="&lt;p&gt;The temporary answer that I found to the problem (a &lt;a href=&quot;https://apple.stackexchange.com/questions/267581/gpu-problem-boot-hangs-on-grey-screen&quot;&gt;known issue&lt;/a&gt; to the model), is to start elementary in advanced options, and go into recovery mode. Due to the fact &lt;a href=&quot;https://everymac.com/systems/apple/macbook_pro/specs/macbook-pro-core-i7-2.2-17-early-2011-unibody-thunderbolt-specs.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this 2011 MBP&lt;/a&gt; model features 2 video adapters (thus now on the Intel one), the settings work just fine, however there's no way to either resume from suspend or hibernate on this mode, neither on Ubuntu 19.04 that I installed as well (it was also an easy answer to install grub2, reinstall ReFind and have access to the advanced boot options), just to test the distro. Whatever I tried, I could not resume from suspend or hibernate.&#xA;However, apart from that, the system is working just fine.&#xA;Though there's a &lt;a href=&quot;https://orville.thebennettproject.com/articles/installing-ubuntu-14-04-lts-on-a-2011-macbook-pro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;more elegant answer&lt;/a&gt;, than the before temporary one that works, only if you have access to grub menus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Here's the walkthrough:&lt;/strong&gt; (as of Opiniated Logic, a more elegant answer):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disable the AMD graphics card permanently:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you reboot you’ll need to press e in the grub menu line you are expected to boot from.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look for the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;set gfxpayload=keep&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once you’ve found it, type the following lines underneath to disable the AMD graphics card:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;outb 0x728 1&#xA;outb 0x710 2&#xA;outb 0x740 2&#xA;outb 0x750 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next find the kernel line and after “quiet splash” , add the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After checking to make sure that we’re mistake-free press F10 (likely Fn + F10) on the Macbook. This should allow us to boot with the integrated Intel graphics card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will load your new Ubuntu Linux system with Intel graphics. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now once booted successfully into the system with working graphics, we just need to set things up so you don’t need to do that &quot;ever&quot; again. Start a Terminal and run the following command to edit the necessary file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will ask you for your user account password to get admin privileges. Enter it and when the file opens search for the line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=“quiet splash“&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and change it to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once this change is made, check for errors then save and exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next we’ll run another command in the Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/grub.d/10_linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Again, enter your password if asked and when the file opens find the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;  insmod gzio&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And place the following immediately before this line:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;  outb 0x728 1&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;echo &quot;  outb 0x710 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;echo &quot;  outb 0x740 2&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;echo &quot;  outb 0x750 0&quot; | sed &quot;s/^/$submenu_indentation/&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check to make sure that everything is correct and save, then exit gedit once more.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will update the boot loader settings we just changed and make them stick. The next time we reboot we won’t have to type out all those obnoxious commands to disable and enable things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personal note: you will have to keep this info handy in case there's a kernel or system update that erases your updated grub's config: in that case, you will have to update grub again making sure the two files are updated again and grub updated consequently.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2019-10-05T16:59:22.103" LastActivityDate="2019-10-05T16:59:22.103" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20795" PostTypeId="1" CreationDate="2019-09-22T12:40:40.183" Score="0" ViewCount="267" Body="&lt;p&gt;Sometime when I copy files interactively using io.elementary.files (either local to to smb/ftp) the copy dialog disappers. When I manage to restore it it is just a little white box so I can't acctually see what's happening or if there are any problems. The file icon in the plank show some (dark) progess bar but the dialog box is just empty.&lt;/p&gt;&#xA;" OwnerUserId="18096" LastActivityDate="2019-09-22T12:40:40.183" Title="files progress dialog minimized (eOS Juno)" Tags="|files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20796" PostTypeId="2" ParentId="10186" CreationDate="2019-09-22T18:10:10.857" Score="1" Body="&lt;p&gt;After several days of tinkering and trying several configurations, I would like to share the scripts (commands) that I've set in order to configure my desktops properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First of all, I have two screens: &#xA;- Laptop Screen 3840x2160 (4k)&#xA;- External Monitor through docking station 1920x1080&#xA;- Laptop panel will be &quot;on the left&quot; while the External monitor is on my right&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --dpi 200 --fb 7680x2160 --output eDP-1 --mode 3840x2160 --output DP-1-1 --auto --scale 2x2 --pos 3840x0 --panning 3840x2160+3840+0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This gives me the PERFECT best experience and works seamlessly perfect (redundant, I know, but it's so preety...!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've turned this on a startu_script and just work flawlessly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ProTip: if you need to adjust the gamma:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output DP-1-1 --gamma 0.90:0.90:0.90 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I use 0.80 or 0.70 gamma all around depending time of day :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-09-22T18:10:10.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20797" PostTypeId="1" AcceptedAnswerId="20799" CreationDate="2019-09-23T01:37:19.497" Score="0" ViewCount="453" Body="&lt;p&gt;So I wanted to install tweaks and have been at it for the past hour and a half, it keeps giving me this error. I did install software-properties-common and it still didn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&#xA;Err:13 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release         &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done                                                                 &#xA;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I'm getting an error when I update as well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;&#xA;Err:18 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release    &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;&#xA;Reading package lists... Done                                                                 &#xA;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any help on how to properly finish this installation would be amazing, thanks!&lt;/p&gt;&#xA;" OwnerUserId="19050" LastActivityDate="2019-09-23T05:31:22.397" Title="Tried installing EOS tweaks, failed and now apt update doesn't work" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20798" PostTypeId="1" AcceptedAnswerId="20802" CreationDate="2019-09-23T01:56:50.507" Score="0" ViewCount="59" Body="&lt;p&gt;everybody.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently I upgrade the OS using dist upgrade. Today I tried to start Windows and can't. I suspected to be some grub error, so I installed grub-customizer and confirmed that there's no Windows grub entry. Can I reinstall Windows grub only using Elementary OS? Someone can help me?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2019-09-23T17:59:23.270" Title="I lost my windows grub after dist upgrade" Tags="|grub|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20799" PostTypeId="2" ParentId="20797" CreationDate="2019-09-23T05:17:00.250" Score="1" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) first remove previously added repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:philip.scott/elementary-tweaks/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2) Then add it manually:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;right-click Files icon, select &lt;code&gt;New Window as Admin&lt;/code&gt; and go to &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;in that directory, create an empty file and name it &lt;code&gt;philip_scott-ubuntu-elementary-tweaks-bionic.list&lt;/code&gt;;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;open that file (i.e. in Code or any other text editor) and paste the following two lines into it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deb http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic main&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# deb-src http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic main&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;save and close the file and try to &lt;code&gt;sudo apt update&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-23T05:31:22.397" LastActivityDate="2019-09-23T05:31:22.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20800" PostTypeId="2" ParentId="20787" CreationDate="2019-09-23T11:55:30.330" Score="1" Body="&lt;p&gt;Guys I was able to get the issue resolved from &lt;a href=&quot;https://silicophilic.com/watch-netflix-on-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. It was basically a Drm issue.&lt;/p&gt;&#xA;" OwnerUserId="18712" LastActivityDate="2019-09-23T11:55:30.330" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20801" PostTypeId="1" AcceptedAnswerId="20860" CreationDate="2019-09-23T14:43:03.640" Score="0" ViewCount="1482" Body="&lt;p&gt;My headphones and microphone work fine, but &lt;strong&gt;I keep hearing myself&lt;/strong&gt;.&#xA;Disabling the microphone mutes the noise, but I need it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there an easy way to solve it? It's usually a toggle in the microphone config, but I can't see anything here. :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Headset:&#xA;Logitech G430 Gaming Headset (USB)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS:&#xA;Juno&#xA;Linux 4.15.0-64-generic&#xA;GTK 3.22.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE:&#xA;In &lt;code&gt;alsamixer&lt;/code&gt; there's no &lt;code&gt;Loopback&lt;/code&gt; option for the audio card of my headset, and the other audio cards have it &lt;code&gt;Disabled&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: output of &lt;code&gt;lspci | grep Audio&lt;/code&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) &#xA;01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="19057" LastEditorUserId="19057" LastEditDate="2019-10-01T09:19:19.313" LastActivityDate="2019-10-01T09:19:19.313" Title="DIsable microphone loopback" Tags="|sound|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20802" PostTypeId="2" ParentId="20798" CreationDate="2019-09-23T17:59:23.270" Score="1" Body="&lt;p&gt;I suppose that you are dual booting Windows and elementary. If that's the case, just install &lt;code&gt;boot-repair&lt;/code&gt; with &lt;code&gt;sudo apt install boot-repair -y&lt;/code&gt; and press Recommended Repair&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0TieH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0TieH.png&quot; alt=&quot;Recommended Repair&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It will fix everything automatically.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-09-23T17:59:23.270" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20803" PostTypeId="1" CreationDate="2019-09-23T19:56:32.653" Score="1" ViewCount="355" Body="&lt;p&gt;The elementary OS by design removes &quot;About&quot; dialogs from third-party apps like Epiphany, and instead encourages to use the AppCentre page for info about version etc. The problem is, that Epiphany's &quot;About&quot; dialog also shows used Webkit version, and this information is now not accessible in this standard way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So what is the right way to check Webkit version used by Epiphany in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2019-09-23T20:19:09.863" Title="How to find Webkit version in Epiphany" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20804" PostTypeId="2" ParentId="20803" CreationDate="2019-09-23T20:19:09.863" Score="2" Body="&lt;p&gt;So one of the developers &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/issues/942#note_609757&quot; rel=&quot;nofollow noreferrer&quot;&gt;showed me&lt;/a&gt; this simple way - just enter this to the address bar:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;about:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And behold your Epiphany and Webkit versions :)&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2019-09-23T20:19:09.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20805" PostTypeId="2" ParentId="20787" CreationDate="2019-09-23T20:37:39.820" Score="0" Body="&lt;p&gt;Install electronplayer snap.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install electronplayer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/electronplayer&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/electronplayer&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you don't have snap support on the system you need to install it first:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm using electronplayer as my daily Netflix player. Just install, run, login and play.&lt;/p&gt;&#xA;" OwnerUserId="18676" LastActivityDate="2019-09-23T20:37:39.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20806" PostTypeId="2" ParentId="20761" CreationDate="2019-09-23T22:27:21.633" Score="0" Body="&lt;p&gt;Suggest you join their Slack-based chat from the white button on the left shown at &lt;a href=&quot;https://elementary.io/get-involved#translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;their Translations page&lt;/a&gt; and ask for help. Open Source projects sometimes drop the ball, certainly not an issue limited to Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for volunteering to help!&lt;/p&gt;&#xA;" OwnerUserId="14560" LastActivityDate="2019-09-23T22:27:21.633" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20807" PostTypeId="1" CreationDate="2019-09-23T23:33:20.530" Score="0" ViewCount="64" Body="&lt;p&gt;I am not able to install updates because the authentication box is &quot;shaking&quot;. It appears it is getting an incorrect password entered error and it is responding with &quot;Authentication failed&quot;, repeated over and over, such that I cannot type a password.&lt;/p&gt;&#xA;" OwnerUserId="18799" LastEditorUserId="16827" LastEditDate="2019-09-27T05:37:13.797" LastActivityDate="2019-09-27T05:37:13.797" Title="Authentication required box is jumping around... cannot enter password" Tags="|release-juno|updates|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20808" PostTypeId="1" CreationDate="2019-09-24T08:26:21.700" Score="0" ViewCount="56" Body="&lt;p&gt;After copying my files from my old home folder to the new one, the applications menu is now missing categories, and not displaying all installed applications. Is there a config file I should delete somewhere/a way of resetting the applications menu?&lt;/p&gt;&#xA;" OwnerUserId="19062" LastActivityDate="2024-02-03T21:05:50.800" Title="Applications menu is messed up after copying files from old home folder" Tags="|applications|pantheon|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20811" PostTypeId="1" CreationDate="2019-09-24T13:44:52.830" Score="0" ViewCount="199" Body="&lt;p&gt;Hey i am having an acer nitro 5 with ryzen 2500u i would like to how to install elementary OS on it cause the normal method using rufus doesn't work on it...i am not gr8 in installation of linux as i have always used only elementary os that too with an intel pentium which was direct install.&lt;br&gt;&#xA;The normal way boots up the usb and shows the cores which do t respond within the time frame&lt;/p&gt;&#xA;" OwnerUserId="19066" LastEditorUserId="16827" LastEditDate="2019-09-27T06:25:32.970" LastActivityDate="2019-10-06T13:01:31.333" Title="Step wise guide to install elementary OS on ryzen 5" Tags="|system-installation|amd|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20812" PostTypeId="1" CreationDate="2019-09-24T18:55:21.033" Score="0" ViewCount="325" Body="&lt;p&gt;elementary OS 5.0 Juno. Three Options How Suspend Mode Works. 1) Suspend working correctly - The screen is black, disks sleep, the power supply sleeps, the button of a power supply of the system unit blinks, 2) The screen is black, the power supply works, the button of a power supply of the system unit blinks, 3) The screen is black, but the computer does not go to sleep&lt;/p&gt;&#xA;" OwnerUserId="17571" LastActivityDate="2024-02-01T20:05:25.737" Title="Suspend mode does not work properly" Tags="|suspend|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="20813" PostTypeId="1" CreationDate="2019-09-24T21:47:29.377" Score="1" ViewCount="59" Body="&lt;p&gt;The desktop title bar has disappeared on Juno. Does anyone have a clue how to restore that? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="18798" LastEditorUserId="16827" LastEditDate="2019-09-26T18:53:01.173" LastActivityDate="2019-09-26T18:53:01.173" Title="Desktop title bar has disappeared on Juno" Tags="|release-juno|wingpanel|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20814" PostTypeId="1" CreationDate="2019-09-24T23:44:25.040" Score="1" ViewCount="301" Body="&lt;p&gt;hi im still new to linux and just dual booted my &lt;strong&gt;hp 14-bs091tx&lt;/strong&gt; with windows, after the installation (and when on the installation prompt) no wifi adapter showed up even when using terminal to turn on the wifi it returns with no device available&lt;/p&gt;&#xA;&#xA;&lt;p&gt;also this two showed up in lspci&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)&#xA;  03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device d72&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is there any solution to this?&#xA;thanks&lt;/p&gt;&#xA;" OwnerUserId="19068" LastEditorUserId="16827" LastEditDate="2019-09-27T06:54:25.230" LastActivityDate="2024-02-18T01:03:25.510" Title="wifi not showing up at all" Tags="|wifi|laptop|hp|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20815" PostTypeId="2" ParentId="15371" CreationDate="2019-09-25T00:42:32.023" Score="1" Body="&lt;p&gt;open terminal and type &lt;code&gt;alsactl restore&lt;/code&gt; then press enter, this should fix the issue&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-09-25T00:42:32.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20818" PostTypeId="2" ParentId="20812" CreationDate="2019-09-25T10:17:10.517" Score="0" Body="&lt;p&gt;If elementary OS is the only OS installed on your PC, it's hard to tell, whether it's elementary OS' fault or Ubuntu's - as elementary OS Juno is Ubuntu-18.04-based. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm dual-booting elementary OS with Windows, and my PC suspends normally in both. My PC's power LED is off during sleep/suspend, but as far as I know, on other PCs it may as well blink, because this behavior is motherboard-specific.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, as this random dysfunction might be hardware-specific (old PC, failing HDD) or software-specific (some process or app messing with power settings and preventing normal suspend), you can upload your logs to a hosting and update your question with a download link, so more technically proficient users than myself could have a look at them.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-25T10:25:02.520" LastActivityDate="2019-09-25T10:25:02.520" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="20819" PostTypeId="1" CreationDate="2019-09-25T13:06:55.550" Score="0" ViewCount="282" Body="&lt;p&gt;I used rufus to burn a usb to make it into a bootable usb for elementary OS 5.0 Juno with which I was hoping to be able to dual boot elementary OS 5.0 Juno with my already existing windows 10. However, when I boot into the usb and select Install elementary OS it show a screen where it shows  some sort of error, something about &quot;couldn't read&quot; for like 2 seconds and goes away then nothing happens. I tried the other options as well but nothing worked. Do you know what I should do?&lt;/p&gt;&#xA;" OwnerUserId="19072" LastEditorUserId="16827" LastEditDate="2019-09-27T07:01:12.600" LastActivityDate="2020-06-29T06:10:49.350" Title="Can not install elementary OS alongside Windows" Tags="|release-juno|software-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20822" PostTypeId="2" ParentId="20819" CreationDate="2019-09-25T13:40:01.487" Score="1" Body="&lt;p&gt;I used usb-startup-creator available in xubuntu to create an install-usb for elementary os this week. Worked perfectly!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or maybe check the bios/uefi/secureboot settings of the laptop. Sometimes laptops are protected to prevent installing other os's than windows...&lt;/p&gt;&#xA;" OwnerUserId="19073" LastActivityDate="2019-09-25T13:40:01.487" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20825" PostTypeId="1" CreationDate="2019-09-25T15:36:29.507" Score="0" ViewCount="179" Body="&lt;p&gt;Switching over from mac os (iterm2) to elementary os.&#xA;One thing I am missing so far is the iterm2 shortcut which shows / hides the same instance of the terminal.&#xA;I know the super+T shortcut in eOS, but thats not what I am looking for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to achieve that? Do I need another terminal app for that?&lt;/p&gt;&#xA;" OwnerUserId="19078" LastActivityDate="2019-09-26T19:52:47.633" Title="Shortcut for show / hide terminal?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20826" PostTypeId="1" CreationDate="2019-09-25T22:17:42.240" Score="0" ViewCount="77" Body="&lt;p&gt;I can't get past the login screen after starting my computer. The wallpaper blinks shortly, and then I'm out again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Says no Nvidia graphics adapter found in syslog. I have AMD graphics card, not nvidia. &lt;/p&gt;&#xA;" OwnerUserId="18985" LastEditorUserId="18985" LastEditDate="2019-09-25T22:51:00.690" LastActivityDate="2024-01-03T12:03:30.373" Title="Can't log in. Blinking desktop" Tags="|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20827" PostTypeId="2" ParentId="20826" CreationDate="2019-09-26T01:34:25.477" Score="0" Body="&lt;p&gt;Maybe try this way...&lt;br&gt;&#xA;1. Press &lt;code&gt;ALT-Control-F1&lt;/code&gt; and use ASCII login&lt;br&gt;&#xA;2. Type &lt;code&gt;mv ~/.config ~/.config.old&lt;/code&gt;&lt;br&gt;&#xA;3. Press &lt;code&gt;ALT-Control-F7&lt;/code&gt; to back to the origin screen and login again&lt;/p&gt;&#xA;" OwnerUserId="18959" LastActivityDate="2019-09-26T01:34:25.477" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20828" PostTypeId="2" ParentId="20825" CreationDate="2019-09-26T01:38:30.313" Score="0" Body="&lt;p&gt;You can use drop-down terminal like Tilda. It can be installed from app center.&lt;/p&gt;&#xA;" OwnerUserId="18959" LastEditorUserId="18959" LastEditDate="2019-09-26T19:52:47.633" LastActivityDate="2019-09-26T19:52:47.633" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20829" PostTypeId="2" ParentId="20825" CreationDate="2019-09-26T07:04:39.750" Score="1" Body="&lt;p&gt;You can install &lt;code&gt;Guake&lt;/code&gt; or &lt;code&gt;Yakuake&lt;/code&gt;. These are the drop down terminals which will give you iterm2 like experience. &#xA;To install &lt;code&gt;Guake&lt;/code&gt; follow &lt;a href=&quot;https://vitux.com/install-and-use-guake-a-drop-down-terminal-emulator-for-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://vitux.com/install-and-use-guake-a-drop-down-terminal-emulator-for-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19083" LastActivityDate="2019-09-26T07:04:39.750" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20831" PostTypeId="2" ParentId="18246" CreationDate="2019-09-26T17:06:32.990" Score="0" Body="&lt;p&gt;I had the same problem. I tried removing the kernels manually with first listing them:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&quot;dpkg --list | grep linux-image&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then removing them with: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge linux-image-3.13.0-XX-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But then I got an error and I was suggested to use:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was what solved my problem. &lt;/p&gt;&#xA;" OwnerUserId="19085" LastActivityDate="2019-09-26T17:06:32.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20832" PostTypeId="1" CreationDate="2019-09-26T17:26:31.813" Score="0" ViewCount="23" Body="&lt;p&gt;I see no way to download an elementary OS trial. I'm not opposed to buying an OS, but I must experience it first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Mint with the Cinnamon DM now, and the GTK3 system dialogs are so awful, they make using Mint Cinnamon like wading through molasses.&lt;/p&gt;&#xA;" OwnerUserId="19086" LastActivityDate="2019-09-26T18:34:25.680" Title="How can I download?" Tags="|live-installation|" AnswerCount="1" CommentCount="0" ClosedDate="2019-09-26T19:02:25.013" ContentLicense="CC BY-SA 4.0" />
  <row Id="20833" PostTypeId="2" ParentId="20832" CreationDate="2019-09-26T17:43:02.503" Score="2" Body="&lt;p&gt;On the download page, click on the custom button and set it to 0. After that you will see that the purchase button now says &lt;strong&gt;Download&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/t2ZhL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t2ZhL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18959" LastEditorUserId="16827" LastEditDate="2019-09-26T18:34:25.680" LastActivityDate="2019-09-26T18:34:25.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20836" PostTypeId="2" ParentId="15293" CreationDate="2019-09-26T18:22:45.360" Score="1" Body="&lt;pre&gt;&lt;code&gt;sudo chmod +s /usr/lib/policykit-1/polkit-agent-helper-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19048" LastEditorUserId="16827" LastEditDate="2019-09-26T18:51:13.253" LastActivityDate="2019-09-26T18:51:13.253" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20838" PostTypeId="2" ParentId="20808" CreationDate="2019-09-27T08:08:12.880" Score="0" Body="&lt;p&gt;GNOME application categories are stored in &lt;code&gt;/usr/share/desktop-directories/&lt;/code&gt; and in &lt;code&gt;/home/[your-username]/.local/share/desktop-directories/&lt;/code&gt;.  Try copying the contents of these folders from your old installation to the new one, and see if it helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info on categories available &lt;a href=&quot;https://askubuntu.com/questions/435806/how-to-create-a-new-category-in-the-gnome-menu&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-27T09:37:13.940" LastActivityDate="2019-09-27T09:37:13.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20839" PostTypeId="1" CreationDate="2019-09-27T10:05:45.427" Score="1" ViewCount="23" Body="&lt;p&gt;Just installed eOS as the only operating system on a desktop PC via usb-stick. No warnings or anything during installation. But now I have this issue:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I turn on the PC nothing happens - no signal is sent to the monitor. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, if I boot while holding escape, it boots into eOS, seemingly with everything working normally. From there I can restart the PC without any issue. However, shutting down, it won't start again unless I hold down the escape.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The desktop has an AMD graphics card.  I have tried running boot repair, which didn't change anything. Also tried this answer, which also didn't work: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2982/os-freya-only-boots-in-recovery-mode-and-doesnt-hibernate&quot;&gt;OS Freya only boots in recovery mode and doesnt hibernate&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be the cause?&lt;/p&gt;&#xA;" OwnerUserId="19091" LastActivityDate="2019-09-27T10:05:45.427" Title="New install of eOS only boots when holding escape" Tags="|release-juno|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20840" PostTypeId="1" CreationDate="2019-09-27T10:23:22.777" Score="0" ViewCount="76" Body="&lt;p&gt;I can't switch keyboard layouts (En/Ru) in Opera browser (newest version, 63.0.3368.94) via system keyboard shortcut, so every time I must switch them with the mouse in wingpanel, which is very annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Opera is the only app on my system that behaves that way. (Yes, I have filed this issue at Opera's bug collector several months ago, but the problem persists.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-27T10:23:22.777" Title="Can't switch languages via keyboard shortcut in Opera" Tags="|release-juno|keyboard-shortcuts|opera|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="20841" PostTypeId="2" ParentId="18938" CreationDate="2019-09-27T15:58:10.263" Score="0" Body="&lt;p&gt;TLDR; &lt;strong&gt;Triple check that your cable supports 60Hz.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Having struggled with this issue for a while now, I would like to point out that it is not you, not the monitor, not Linux but very likely the cable. A few months ago, I have even brought a perfectly fine, brand new 4K monitor back to the store because I thought I could not use it (30Hz is just unacceptable if you are doing 3D work). I spent evenings messing with &lt;code&gt;xrandr&lt;/code&gt;, all to no avail. The guy at the store ensured me the cable was fine, but as it turns out, it was not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This morning, I received a new USB-c to HDMI cable that explicitly supports 60Hz (it even says so on the USB-c plug). Just plugged it in and the issue is fixed. Even the monitor's 2.2 Gamma is displayed more accurately; I had it set to 2.6 with the other cable to get any depth in the blacks. I am using a Dell XPS 13 9370 with a 27&quot; 4K Philips monitor (276E8VJSB) and elementary OS 5.0 Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dLjJ7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dLjJ7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12375" LastEditorUserId="12375" LastEditDate="2019-09-27T16:15:42.160" LastActivityDate="2019-09-27T16:15:42.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20842" PostTypeId="1" CreationDate="2019-09-27T17:02:16.370" Score="0" ViewCount="1485" Body="&lt;p&gt;Had this error while trying to install Lutris :&lt;code&gt;sudo add-apt-repository ppa:lutris-team/lutris&lt;/code&gt; and then this came out :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; Traceback (most recent call last):&#xA;  File &quot;/usr/bin/add-apt-repository&quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    from softwareproperties.SoftwareProperties import SoftwareProperties, shortcut_handler&#xA;  File &quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&quot;, line 28, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems like the problem is something about python?&lt;/p&gt;&#xA;" OwnerUserId="19012" LastActivityDate="2024-03-19T01:08:06.000" Title="No module named apt_pkg" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20843" PostTypeId="1" CreationDate="2019-09-27T21:49:24.510" Score="0" ViewCount="108" Body="&lt;p&gt;Somehow I've got two similar &quot;Files&quot; app installed. Since it is translated, I can't even identify the name to purge it. How do I leave Phanteon Files only?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7qwzp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7qwzp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They seems quite similar, but for sure is not the same app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/19LhY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/19LhY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18087" LastActivityDate="2019-09-28T10:11:23.217" Title="Why there are two &quot;files&quot; apps" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20844" PostTypeId="2" ParentId="20843" CreationDate="2019-09-28T09:54:13.063" Score="3" Body="&lt;p&gt;Pantheon-files by elementary LLC has a light-grey folder icon with a 'home' symbol on top of it. To uninstall its competitor ('Arquivos' app with a  blue locker icon):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;code&gt;AppCenter&lt;/code&gt; &gt; &lt;code&gt;Installed&lt;/code&gt; tab. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Scroll until you find &lt;code&gt;Arquivos&lt;/code&gt; app with a blue locker icon.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click it and hit &lt;code&gt;Uninstall&lt;/code&gt; button. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-28T10:11:23.217" LastActivityDate="2019-09-28T10:11:23.217" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20845" PostTypeId="2" ParentId="19605" CreationDate="2019-09-28T12:20:04.547" Score="0" Body="&lt;p&gt;Also, as written on &lt;a href=&quot;https://www.nbcsports.com/gold/faq-en-intl&quot; rel=&quot;nofollow noreferrer&quot;&gt;NBC Gold&lt;/a&gt; troubleshoot page:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;You will need to unblock 3rd party cookies, in order to view video.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;(As this is a must, try unblocking 3rd party cookies in your browser, and see if it will enable video streaming.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-09-28T12:20:04.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20846" PostTypeId="1" CreationDate="2019-09-28T13:25:46.333" Score="1" ViewCount="652" Body="&lt;p&gt;I'm using 5.0 Juno&#xA;Linux 4.15.0-64-generic&#xA;GTK 3.22.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm installing Flameshot-Screenshot App from this web&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flameshot.js.org/#/getting-start]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flameshot.js.org/#/getting-start]&lt;/a&gt;&lt;a href=&quot;https://snapcraft.io/install/flameshot-app/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like this application because it's very simple and similar to Lighshot on Mac and Windows, which I usually use.&#xA;But after installation, the application does not run. The icon bouncing on the Dock then disappears in a few moments.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then I tried another way, via snapcraft.&#xA;&lt;a href=&quot;https://snapcraft.io/install/flameshot-app/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flameshot App Snapcraft&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the installation process, there is no single icon related to Flameshot in the application list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I beg for help from Elementary developers, a solution how this application can run well. Thanks a lot.&lt;/p&gt;&#xA;" OwnerUserId="19096" LastEditorUserId="16827" LastEditDate="2019-10-07T07:54:49.757" LastActivityDate="2019-10-07T07:54:49.757" Title="Flameshot Screenshot App" Tags="|release-juno|software-installation|screenshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20847" PostTypeId="2" ParentId="20846" CreationDate="2019-09-28T14:02:38.200" Score="2" Body="&lt;p&gt;To &lt;em&gt;really&lt;/em&gt; launch Flameshot after successful installation:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;Applications&lt;/code&gt; menu &gt; &lt;code&gt;Graphics&lt;/code&gt; tab.&lt;/li&gt;&#xA;&lt;li&gt;Locate &lt;code&gt;Take Graphical Screenshot&lt;/code&gt; flameshot icon.&lt;/li&gt;&#xA;&lt;li&gt;Right-click it and click &lt;code&gt;Add to Dock&lt;/code&gt; menu item.&lt;/li&gt;&#xA;&lt;li&gt;Right-click this icon in the Dock and click &lt;code&gt;Keep in Dock&lt;/code&gt; menu item.&lt;/li&gt;&#xA;&lt;li&gt;To launch Flameshot, use this icon. (You can delete 'Launch Flameshot' icon from the Dock.)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Indeed, for some reason, the icon named 'Launch Flameshot' apparently doesn't do anything at all, except for joyful jumping. (At least in v0.5.1 from Ubuntu's depository.) If this behavior is not a bug, then it is definitely a UI design flaw. If you'd like, you can report this issue to the developer @  &lt;a href=&quot;https://github.com/lupoDharkael/flameshot/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lupoDharkael/flameshot/issues&lt;/a&gt; .&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-09-28T16:41:24.247" LastActivityDate="2019-09-28T16:41:24.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20848" PostTypeId="1" CreationDate="2019-09-28T15:15:21.553" Score="0" ViewCount="43" Body="&lt;p&gt;My apologies if this has been asked. I looked and found a couple questions that could be similar, but not exactly the same, at least as described. After closing the lid on my laptop and suspending and then opening the lid, i have a greeter screen where the mouse moves and the top bar is present with the power icon from which I can either Suspend or Shutdown and from which I can successfully restart. There are other icons present, I've forgotten which they are, and assume they are those normally present on the greeter screen. There is no card with a login prompt. Simply entering my password despite that does nothing. To be as clear as possible without a picture, I have a dark gray background, top bar, and mouse pointer. Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mnf2m.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mnf2m.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14107" LastEditorUserId="14107" LastEditDate="2019-11-05T13:54:06.790" LastActivityDate="2019-11-05T13:54:06.790" Title="No login prompt on greeter" Tags="|release-juno|greeter|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="20849" PostTypeId="1" CreationDate="2019-09-28T18:03:41.450" Score="0" ViewCount="4297" Body="&lt;p&gt;Hi there recently I switch from windows to Elementary OS Juno, my WiFi does not work, I tried many ways, nothing worked. So I bought 2 wifi routers, but both say &quot;Wireless is Disabled&quot;. I would appreciate your help, I'm a noob. I want at least one of those work, I'm currently using USB tethering.&lt;a href=&quot;https://i.stack.imgur.com/nb4Sw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nb4Sw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;details:&#xA;HP Elitebook 8440P&#xA;Core i5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wifi card: Intel Corporation 82577LM Gigabit Network Connection.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1st Wifi router: TPLINK TL-WN422G.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2nd Wifi router: 802.11 n wlan.&lt;/p&gt;&#xA;" OwnerDisplayName="user19097" LastActivityDate="2024-02-19T05:05:00.593" Title="How to fix &quot;WiFi is Disabled&quot; on Elementary OS?" Tags="|wifi|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20850" PostTypeId="2" ParentId="20849" CreationDate="2019-09-28T18:47:34.033" Score="0" Body="&lt;p&gt;Did you install the proper driver for your wifi adaptor? Maybe you can find some information in ubuntu forum like this,&#xA;&lt;a href=&quot;https://askubuntu.com/questions/512727/how-to-install-driver-for-tp-link-tl-wn722n-on-ubuntu-14-04&quot;&gt;https://askubuntu.com/questions/512727/how-to-install-driver-for-tp-link-tl-wn722n-on-ubuntu-14-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18959" LastActivityDate="2019-09-28T18:47:34.033" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20852" PostTypeId="2" ParentId="20849" CreationDate="2019-09-29T04:18:56.993" Score="0" Body="&lt;p&gt;Looking at your laptop from the spec sheet I found on HP's site, it looks like you have an Intel powered wired internet connection card, but your WiFi card is made by Broadcom. It's pretty common for boards to have network adapters from different manufactures but since the WiFi one is what's acting up, you likely need a Broadcom specific driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a very extensive guide as the top answer to &lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&quot;&gt;this&lt;/a&gt; AskUbuntu question with step by step instructions on setting up Broadcom drivers within Ubuntu and this should work for Elementary. This does look to take a bit of reading and paying attention, but it looks like it should help out!&lt;/p&gt;&#xA;" OwnerUserId="18453" LastActivityDate="2019-09-29T04:18:56.993" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20853" PostTypeId="1" CreationDate="2019-09-29T12:21:21.407" Score="2" ViewCount="48" Body="&lt;p&gt;It's pretty self-explanatory, I have installed elementary alongside windows 10 on my Asus Zenbook ux580ge and after logging in I get an empty desktop with just the background image and the cursor (which I can move)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What do I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Which I can move for a limited period of time, after that it just freezes&lt;/p&gt;&#xA;" OwnerUserId="19099" LastActivityDate="2019-09-29T12:21:21.407" Title="Empty desktop after login" Tags="|release-juno|system-installation|greeter|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="20854" PostTypeId="1" CreationDate="2019-09-29T15:00:20.150" Score="1" ViewCount="170" Body="&lt;p&gt;Firefox crashes when unlocking a locked session. This in itself is a Firefox issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But the problem is that this crash cascades and crashes a gnome session, returning me to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can log back in perfectly well, but the session is all new.&#xA;This does not happen on every unlock, usually you have to wait a few minutes to unlock for it to crash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That makes this bug particularly annoying because it's so difficult to reproduce, and to me suggests race conditions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Interestingly, when I run Firefox from terminal it crashes, prints errors, but does not crash the session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually, I am able to resolve issues by myself, but in this instance I've hit a wall. I am not familiar with how exactly the GUI system works and would therefore appreciate any help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This system worked for years without any significant problems, but after the latest Firefox update this issue appeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;System information:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a&#xA;&#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 0.4.1 Loki&#xA;Release:    0.4.1&#xA;Codename:   loki&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -a&#xA;&#xA;Linux xxx-pc 4.4.0-164-generic #192-Ubuntu SMP Fri Sep 13 12:02:50 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gnome-shell --version &#xA;&#xA;GNOME Shell 3.18.5&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;~/.Xauthority&lt;/strong&gt; and &lt;strong&gt;~/.ICEauthority&lt;/strong&gt; are owned by my user and &lt;strong&gt;~/.xsession-errors&lt;/strong&gt; is completely empty.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Firefox error messages (terminal output):&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(/usr/lib/firefox/firefox:13869): dconf-WARNING **: Unable to open /var/lib/snapd/desktop/dconf/profile/user: Permission denied&#xA;[Parent 13737, Gecko_IOThread] WARNING: pipe error: Broken pipe: file /build/firefox-EymEXX/firefox-69.0.1+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 728&#xA;[Parent 13737, Gecko_IOThread] WARNING: pipe error: Broken pipe: file /build/firefox-EymEXX/firefox-69.0.1+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 728&#xA;[Parent 13737, Gecko_IOThread] WARNING: pipe error: Broken pipe: file /build/firefox-EymEXX/firefox-69.0.1+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 728&#xA;[Parent 13737, Gecko_IOThread] WARNING: pipe error: Broken pipe: file /build/firefox-EymEXX/firefox-69.0.1+build1/ipc/chromium/src/chrome/common/ipc_channel_posix.cc, line 728&#xA;&#xA;(/usr/lib/firefox/firefox:13794): dconf-WARNING **: Unable to open /var/lib/snapd/desktop/dconf/profile/user: Permission denied&#xA;[GFX1-]: Killing GPU process due to IPC reply timeout&#xA;[GFX1-]: Receive IPC close with reason=AbnormalShutdown&#xA;[GFX1-]: Receive IPC close with reason=AbnormalShutdown&#xA;[GFX1-]: Receive IPC close with reason=AbnormalShutdown&#xA;&#xA;###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Parent][MessageChannel] Error: (msgtype=0x2000F,name=PAPZInputBridge::Msg_UpdateWheelTransaction) Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Parent][MessageChannel::SendAndWait] Error: (msgtype=0x20010,name=PAPZInputBridge::Msg_ProcessUnhandledEvent) Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Child][MessageChannel] Error: (msgtype=0x330032,name=PCompositorBridge::Msg_NotifyRegionInvalidated) Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Child][MessageChannel] Error: (msgtype=0x590001,name=PLayerTransaction::Msg_Update) Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Child][MessageChannel] Error: (msgtype=0x590016,name=PLayerTransaction::Msg_ScheduleComposite) Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv&#xA;&#xA;&#xA;###!!! [Parent][RunMessage] Error: Channel error: cannot send/recv&#xA;&#xA;[GFX1-]: Receive IPC close with reason=AbnormalShutdown&#xA;&#xA;###!!! [Parent][MessageChannel] Error: (msgtype=0x4D001A,name=PGPU::Msg_ShutdownVR) Channel error: cannot send/recv&#xA;&#xA;Terminated&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Relevant syslog section:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/BdSR5tXT&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/BdSR5tXT&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lightdm.log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[+6981.87s] DEBUG: Greeter start authentication for xxx&#xA;[+6981.87s] DEBUG: Seat seat0: Failed to work out session ID to mark&#xA;[+6981.87s] DEBUG: Session pid=18581: Started with service 'lightdm', username 'xxx'&#xA;[+6981.88s] DEBUG: Session pid=18581: Got 1 message(s) from PAM&#xA;[+6981.88s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+6993.38s] DEBUG: Continue authentication&#xA;[+6993.41s] DEBUG: Session pid=18581: Authentication complete with return value 0: Success&#xA;[+6993.41s] DEBUG: Authenticate result for user xxx: Success&#xA;[+6993.41s] DEBUG: User xxx authorized&#xA;[+6993.78s] DEBUG: Greeter requests session pantheon&#xA;[+6993.78s] DEBUG: Seat seat0: Returning to existing user session xxx&#xA;[+6993.78s] DEBUG: Unlocking login1 session c12&#xA;[+6993.79s] DEBUG: Activating VT 7&#xA;[+6995.06s] DEBUG: Seat seat0: Stopping greeter&#xA;[+6995.06s] DEBUG: Session pid=18518: Sending SIGTERM&#xA;[+6995.06s] DEBUG: Activating login1 session c12&#xA;[+6995.07s] DEBUG: Session pid=18581: Exited with return value 0&#xA;[+6995.07s] DEBUG: Seat seat0: Session stopped&#xA;[+6995.07s] DEBUG: Seat seat0 changes active session to c12&#xA;[+6995.07s] DEBUG: Session c12 is already active&#xA;[+6995.08s] DEBUG: Session pid=18518: Exited with return value 0&#xA;[+6995.08s] DEBUG: Seat seat0: Session stopped&#xA;[+6995.08s] DEBUG: Seat seat0: Stopping display server, no sessions require it&#xA;[+6995.08s] DEBUG: Sending signal 15 to process 18510&#xA;[+6995.10s] DEBUG: Process 18510 exited with return value 0&#xA;[+6995.10s] DEBUG: DisplayServer x-1: X server stopped&#xA;[+6995.10s] DEBUG: Releasing VT 8&#xA;[+6995.10s] DEBUG: DisplayServer x-1: Removing X server authority /var/run/lightdm/root/:1&#xA;[+6995.10s] DEBUG: Seat seat0: Display server stopped&#xA;[+6995.79s] DEBUG: Session pid=8453: Exited with return value 0&#xA;[+6995.79s] DEBUG: Seat seat0: Session stopped&#xA;[+6995.79s] DEBUG: Seat seat0: Stopping display server, no sessions require it&#xA;[+6995.79s] DEBUG: Sending signal 15 to process 8388&#xA;[+6996.22s] DEBUG: Process 8388 exited with return value 0&#xA;[+6996.22s] DEBUG: DisplayServer x-0: X server stopped&#xA;[+6996.22s] DEBUG: Releasing VT 7&#xA;[+6996.22s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0&#xA;[+6996.22s] DEBUG: Seat seat0: Display server stopped&#xA;[+6996.22s] DEBUG: Seat seat0: Active display server stopped, starting greeter&#xA;[+6996.22s] DEBUG: Seat seat0: Creating greeter session&#xA;[+6996.22s] DEBUG: Seat seat0: Creating display server of type x&#xA;[+6996.22s] DEBUG: Using VT 7&#xA;[+6996.22s] DEBUG: Seat seat0: Starting local X display on VT 7&#xA;[+6996.22s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log&#xA;[+6996.22s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0&#xA;[+6996.22s] DEBUG: DisplayServer x-0: Launching X Server&#xA;[+6996.22s] DEBUG: Launching process 18700: /usr/bin/X -core :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch&#xA;[+6996.22s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0&#xA;[+6996.74s] DEBUG: Got signal 10 from process 18700&#xA;[+6996.74s] DEBUG: DisplayServer x-0: Got signal from X server :0&#xA;[+6996.74s] DEBUG: DisplayServer x-0: Connecting to XServer :0&#xA;[+6996.75s] DEBUG: Seat seat0: Display server ready, starting session authentication&#xA;[+6996.75s] DEBUG: Session pid=18710: Started with service 'lightdm-greeter', username 'lightdm'&#xA;[+6996.76s] DEBUG: Session pid=18710: Authentication complete with return value 0: Success&#xA;[+6996.76s] DEBUG: Seat seat0: Session authenticated, running command&#xA;[+6996.76s] DEBUG: Session pid=18710: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/pantheon-greeter&#xA;[+6996.76s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm&#xA;[+6996.76s] DEBUG: Session pid=18710: Logging to /var/log/lightdm/seat0-greeter.log&#xA;[+6996.79s] DEBUG: Activating VT 7&#xA;[+6996.79s] DEBUG: Activating login1 session c16&#xA;[+6996.79s] DEBUG: Seat seat0 changes active session to c16&#xA;[+6996.79s] DEBUG: Session c16 is already active&#xA;[+6997.02s] DEBUG: Greeter connected version=1.18.3 resettable=false&#xA;[+6999.17s] DEBUG: Greeter start authentication for xxx&#xA;[+6999.17s] DEBUG: Session pid=18770: Started with service 'lightdm', username 'xxx'&#xA;[+6999.18s] DEBUG: Session pid=18770: Got 1 message(s) from PAM&#xA;[+6999.18s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+7001.68s] DEBUG: Continue authentication&#xA;[+7001.70s] DEBUG: Session pid=18770: Authentication complete with return value 0: Success&#xA;[+7001.70s] DEBUG: Authenticate result for user xxx: Success&#xA;[+7001.70s] DEBUG: User xxx authorized&#xA;[+7002.04s] DEBUG: Greeter requests session pantheon&#xA;[+7002.04s] DEBUG: Seat seat0: Stopping greeter; display server will be re-used for user session&#xA;[+7002.04s] DEBUG: Session pid=18710: Sending SIGTERM&#xA;[+7002.05s] DEBUG: Session pid=18710: Exited with return value 0&#xA;[+7002.05s] DEBUG: Seat seat0: Session stopped&#xA;[+7002.05s] DEBUG: Seat seat0: Greeter stopped, running session&#xA;[+7002.05s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session3&#xA;[+7002.05s] DEBUG: Session pid=18770: Running command /usr/sbin/lightdm-session gnome-session --session=pantheon&#xA;[+7002.05s] DEBUG: Creating shared data directory /var/lib/lightdm-data/xxx&#xA;[+7002.05s] DEBUG: Session pid=18770: Logging to .xsession-errors&#xA;[+7002.09s] DEBUG: Activating VT 7&#xA;[+7002.09s] DEBUG: Activating login1 session c17&#xA;[+7002.09s] DEBUG: Seat seat0 changes active session to c17&#xA;[+7002.09s] DEBUG: Session c17 is already active&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lightdm/seat0-greeter.log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(gnome-settings-daemon:11593): GLib-CRITICAL **: Source ID 320 was not found when attempting to remove it&#xA;** Message: LightDMGateway.vala:84: Connecting to LightDM...&#xA;** Message: LightDMGateway.vala:93: Successfully connected to LightDM.&#xA;** Message: IndicatorBar.vala:53: Loading indicators...&#xA;** Message: IndicatorBar.vala:63: Loading indicator bluetooth...&#xA;** Message: IndicatorBar.vala:63: Loading indicator session...&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;** Message: IndicatorBar.vala:63: Loading indicator power...&#xA;&#xA;(pantheon-greeter:14569): Gtk-CRITICAL **: gtk_box_pack: assertion '_gtk_widget_get_parent (child) == NULL' failed&#xA;** Message: IndicatorBar.vala:63: Loading indicator network...&#xA;&#xA;** (pantheon-greeter:14569): CRITICAL **: g_ptr_array_get_length: assertion 'self != NULL' failed&#xA;&#xA;(pantheon-greeter:14569): GLib-CRITICAL **: g_ptr_array_foreach: assertion 'array' failed&#xA;&#xA;(pantheon-greeter:14569): Gtk-CRITICAL **: gtk_widget_set_no_show_all: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&#xA;(pantheon-greeter:14569): Gtk-CRITICAL **: gtk_widget_set_visible: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&#xA;(pantheon-greeter:14569): GLib-CRITICAL **: g_ptr_array_foreach: assertion 'array' failed&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:14569): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;&#xA;** (pantheon-greeter:14569): WARNING **: Wallpaper.vala:55: Key file does not have key 'default-wallpaper' in group 'greeter'&#xA;&#xA;** (pantheon-greeter:14569): WARNING **: PantheonGreeter.vala:162: Key file does not have key 'activate-numlock' in group 'greeter'&#xA;** Message: EntryList.vala:39: Resorting indicators...&#xA;** Message: LightDMGateway.vala:105: Starting authentication...&#xA;** Message: LightDMGateway.vala:150: LightDM prompt: 'Password: ' (LIGHTDM_PROMPT_TYPE_SECRET)&#xA;&#xA;** (gnome-settings-daemon:14609): WARNING **: Unable to register client: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such method 'RegisterClient'&#xA;&#xA;(gnome-settings-daemon:14609): updates-plugin-WARNING **: failed to get upgrades: Spawn of helper '/usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py' failed: failed to spawn /usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py: Failed to execute child process &quot;/usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py&quot; (No such file or directory)&#xA;** Message: PantheonGreeter.vala:220: restore user timeout: 600&#xA;** Message: LightDMGateway.vala:262: Starting session pantheon&#xA;&#xA;** (gnome-settings-daemon:14609): WARNING **: Name taken or bus went away - shutting down&#xA;&#xA;(pantheon-greeter:14569): Gdk-WARNING **: pantheon-greeter: Fatal IO error 0 (Success) on X server :1.&#xA;&#xA;&#xA;(gnome-settings-daemon:14609): Gdk-WARNING **: gnome-settings-daemon: Fatal IO error 11 (Resource temporarily unavailable) on X server :1.&#xA;&#xA;** Message: LightDMGateway.vala:84: Connecting to LightDM...&#xA;** Message: LightDMGateway.vala:93: Successfully connected to LightDM.&#xA;** Message: IndicatorBar.vala:53: Loading indicators...&#xA;** Message: IndicatorBar.vala:63: Loading indicator bluetooth...&#xA;** Message: IndicatorBar.vala:63: Loading indicator session...&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;** Message: IndicatorBar.vala:63: Loading indicator power...&#xA;&#xA;(pantheon-greeter:18536): Gtk-CRITICAL **: gtk_box_pack: assertion '_gtk_widget_get_parent (child) == NULL' failed&#xA;** Message: IndicatorBar.vala:63: Loading indicator network...&#xA;&#xA;** (pantheon-greeter:18536): CRITICAL **: g_ptr_array_get_length: assertion 'self != NULL' failed&#xA;&#xA;(pantheon-greeter:18536): GLib-CRITICAL **: g_ptr_array_foreach: assertion 'array' failed&#xA;&#xA;(pantheon-greeter:18536): Gtk-CRITICAL **: gtk_widget_set_no_show_all: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&#xA;(pantheon-greeter:18536): Gtk-CRITICAL **: gtk_widget_set_visible: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&#xA;(pantheon-greeter:18536): GLib-CRITICAL **: g_ptr_array_foreach: assertion 'array' failed&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-WARNING **: invalid (NULL) pointer instance&#xA;&#xA;(pantheon-greeter:18536): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;&#xA;** (pantheon-greeter:18536): WARNING **: Wallpaper.vala:55: Key file does not have key 'default-wallpaper' in group 'greeter'&#xA;&#xA;** (pantheon-greeter:18536): WARNING **: PantheonGreeter.vala:162: Key file does not have key 'activate-numlock' in group 'greeter'&#xA;** Message: EntryList.vala:39: Resorting indicators...&#xA;** Message: LightDMGateway.vala:105: Starting authentication...&#xA;** Message: LightDMGateway.vala:150: LightDM prompt: 'Password: ' (LIGHTDM_PROMPT_TYPE_SECRET)&#xA;** Message: Wallpaper.vala:130: Cancelled to load '/usr/share/backgrounds/elementaryos-default'&#xA;&#xA;** (gnome-settings-daemon:18574): WARNING **: Unable to register client: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such method 'RegisterClient'&#xA;&#xA;(gnome-settings-daemon:18574): updates-plugin-WARNING **: failed to get upgrades: Spawn of helper '/usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py' failed: failed to spawn /usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py: Failed to execute child process &quot;/usr/share/PackageKit/helpers/aptcc/get-distro-upgrade.py&quot; (No such file or directory)&#xA;** Message: PantheonGreeter.vala:220: restore user timeout: 600&#xA;** Message: LightDMGateway.vala:262: Starting session pantheon&#xA;&#xA;** (gnome-settings-daemon:18574): WARNING **: Name taken or bus went away - shutting down&#xA;&#xA;(pantheon-greeter:18536): Gdk-WARNING **: pantheon-greeter: Fatal IO error 0 (Success) on X server :1.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lightdm/x-0.log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X.Org X Server 1.18.4&#xA;Release Date: 2016-07-19&#xA;X Protocol Version 11, Revision 0&#xA;Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu&#xA;Current Operating System: Linux xxx-pc 4.4.0-164-generic #192-Ubuntu SMP Fri Sep 13 12:02:50 UTC 2019 x86_64&#xA;Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-164-generic root=UUID=2288b46a-c118-4015-b0ff-5a5c598e8eb2 ro net.ifnames=0 biosdevname=0 quiet splash radeon.dpm=1 vt.handoff=7&#xA;Build Date: 10 August 2018  09:33:05AM&#xA;xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) &#xA;Current version of pixman: 0.33.6&#xA;    Before reporting problems, check http://wiki.x.org&#xA;    to make sure that you have the latest version.&#xA;Markers: (--) probed, (**) from config file, (==) default setting,&#xA;    (++) from command line, (!!) notice, (II) informational,&#xA;    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.&#xA;(==) Log file: &quot;/var/log/Xorg.0.log&quot;, Time: Sun Sep 29 01:58:18 2019&#xA;(==) Using system config directory &quot;/usr/share/X11/xorg.conf.d&quot;&#xA;(II) [KMS] Kernel modesetting enabled.&#xA;The XKEYBOARD keymap compiler (xkbcomp) reports:&#xA;&amp;gt; Warning:          Type &quot;ONE_LEVEL&quot; has 1 levels, but &amp;lt;RALT&amp;gt; has 2 symbols&#xA;&amp;gt;                   Ignoring extra symbols&#xA;Errors from xkbcomp are not fatal to the X server&#xA;(II) AIGLX: Suspending AIGLX clients for VT switch&#xA;(II) AIGLX: Suspending AIGLX clients for VT switch&#xA;(II) AIGLX: Suspending AIGLX clients for VT switch&#xA;(II) Server terminated successfully (0). Closing log file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;lightdm/x-1.log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;X.Org X Server 1.18.4&#xA;Release Date: 2016-07-19&#xA;X Protocol Version 11, Revision 0&#xA;Build Operating System: Linux 4.4.0-128-generic x86_64 Ubuntu&#xA;Current Operating System: Linux xxx-pc 4.4.0-164-generic #192-Ubuntu SMP Fri Sep 13 12:02:50 UTC 2019 x86_64&#xA;Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-164-generic root=UUID=2288b46a-c118-4015-b0ff-5a5c598e8eb2 ro net.ifnames=0 biosdevname=0 quiet splash radeon.dpm=1 vt.handoff=7&#xA;Build Date: 10 August 2018  09:33:05AM&#xA;xorg-server 2:1.18.4-0ubuntu0.8 (For technical support please see http://www.ubuntu.com/support) &#xA;Current version of pixman: 0.33.6&#xA;    Before reporting problems, check http://wiki.x.org&#xA;    to make sure that you have the latest version.&#xA;Markers: (--) probed, (**) from config file, (==) default setting,&#xA;    (++) from command line, (!!) notice, (II) informational,&#xA;    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.&#xA;(==) Log file: &quot;/var/log/Xorg.1.log&quot;, Time: Sun Sep 29 13:40:32 2019&#xA;(==) Using system config directory &quot;/usr/share/X11/xorg.conf.d&quot;&#xA;Xorg: ../../dix/privates.c:385: dixRegisterPrivateKey: Assertion `!global_keys[type].created' failed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Xorg.1.log:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://pastebin.com/gbCncjDq&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/gbCncjDq&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19100" LastEditorUserId="19100" LastEditDate="2019-09-29T15:34:09.143" LastActivityDate="2019-09-29T15:34:09.143" Title="Firefox crashes Gnome Session" Tags="|release-loki|greeter|desktop|gnome|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="20855" PostTypeId="1" CreationDate="2019-09-29T21:18:19.570" Score="0" ViewCount="39" Body="&lt;p&gt;after finally getting the OS to work after the login screen I'm now having some issues with getting my second monitor to work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia drivers are installed (latest ver.)&#xA;I ran both &lt;code&gt;prime-select nvidia/intel&lt;/code&gt; but with no luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*My laptop is an Asus zenbook pro UX580GE, running an Nvidia GTX1050 ti&lt;/p&gt;&#xA;" OwnerUserId="19099" LastEditorUserId="19099" LastEditDate="2019-09-29T22:01:55.163" LastActivityDate="2019-10-05T05:39:49.747" Title="System not detecting second monitor" Tags="|release-juno|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20856" PostTypeId="1" CreationDate="2019-09-30T05:20:33.353" Score="1" ViewCount="2812" Body="&lt;p&gt;I have been looking into some ultra-portable GNU/Linux laptops for some of my younger family members.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I do not yet believe I can recommend these to them if they cannot run elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Will or is it already usable to run elementaryOS on SBC computers like the PineBook Pro and &lt;a href=&quot;https://www.wikipedia.org/wiki/BeagleBoard#BeagleBone_Black&quot; rel=&quot;nofollow noreferrer&quot;&gt;BBB&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="19105" LastEditorUserId="16827" LastEditDate="2019-10-12T11:29:21.590" LastActivityDate="2019-12-13T08:01:40.457" Title="Will/Can elementaryOS support ARM?" Tags="|system-installation|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20857" PostTypeId="1" CreationDate="2019-09-30T08:59:03.060" Score="0" ViewCount="87" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x229P.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x229P.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;I want to ask, I saw this screen when I installed it with usb.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you switch to ubuntu18.04, you will have the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although you can continue to install down, there will be serious errors in the end (the actual error is not clear because of the blur)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect that n graphics card is not supported, or the screen is 144 Hz (this is my personal guess)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;May I ask if I have any suggestions for my question?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is also a problem iso 1.48 GB is the size provided by the elementary official website, but the actual download is 1.37 GB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it normal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;10/2 18.20 supplement&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I have the above situation again, I directly unplug the usb and the screen will display normally (although I can't continue the installation to force the shutdown)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I have guessed that the USB flash drive problem (the drive itself is brand new), so I tested it with FlashTester.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;No problem with results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, I tried other usb holes and found that the front plate has the same problem, so it is not a separate problem with the usb hole.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another point, I am using dp line transmission.&lt;/p&gt;&#xA;" OwnerUserId="19106" LastEditorUserId="16827" LastEditDate="2019-10-07T07:41:08.287" LastActivityDate="2019-10-07T07:41:08.287" Title="Elementary5.0 installation problem _ This screen shows my headache" Tags="|release-juno|system-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="20858" PostTypeId="2" ParentId="17211" CreationDate="2019-09-30T14:16:06.810" Score="5" Body="&lt;h1&gt;Why doesn't it work?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Elementary OS dropped support for GtkStatusIcon and Ayatana &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4226/how-can-i-get-applications-to-display-a-system-tray-icon&quot;&gt;[source]&lt;/a&gt; (the two tray APIs most applications use). The reason is probably that they wanted to force developers to make their indicator apps eOS-specific, so that they don't ruin the user experience. For this reason, no old indicator app will work with Juno.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Alternative solution&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Fortunately, there is an application called &lt;code&gt;wingpanel-indicator-sys-monitor&lt;/code&gt; which can display CPU, RAM and network usage in the Wingpanel tray and works even with Juno. It isn't available from the AppCenter yet, but building it from source is very simple.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VqUle.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VqUle.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Installation&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;First you need to install all the dependencies:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git libglib2.0-dev libgtop2-dev libgranite-dev libgtk-3-dev libwingpanel-2.0-dev meson valac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you can clone the source code to a local directory:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/PlugaruT/wingpanel-indicator-sys-monitor.git &amp;amp;&amp;amp; cd wingpanel-indicator-sys-monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then build it:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;meson build --prefix=/usr &amp;amp;&amp;amp; cd build/ &amp;amp;&amp;amp; ninja&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And finally install it:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now relog and the indicator will be available for you!&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2019-09-30T14:16:06.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20860" PostTypeId="2" ParentId="20801" CreationDate="2019-10-01T09:14:23.897" Score="1" Body="&lt;p&gt;I noticed in &lt;code&gt;alsamixer&lt;/code&gt; for the sound card of my headset a dedicated volume column to &lt;em&gt;Mic&lt;/em&gt;, in the &lt;code&gt;F3: Playback&lt;/code&gt; view (and not &lt;code&gt;F4: Capture&lt;/code&gt;!), lowering it to 0 solved my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l3I3s.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l3I3s.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="19057" LastActivityDate="2019-10-01T09:14:23.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20862" PostTypeId="1" CreationDate="2019-10-02T08:57:45.743" Score="1" ViewCount="136" Body="&lt;p&gt;We don't use USB printers at work, and so I need to add Network Printer using PPD File on JUNO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;" OwnerUserId="19115" LastActivityDate="2019-10-11T10:05:01.737" Title="How to Install Network Printer using PPD File on JUNO" Tags="|release-juno|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20864" PostTypeId="2" ParentId="14985" CreationDate="2019-10-02T11:02:54.253" Score="0" Body="&lt;p&gt;If you are still having a problem with display drivers you can try: &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or if there are any other problems with drivers or packages during the boot run: &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="18629" LastActivityDate="2019-10-02T11:02:54.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20867" PostTypeId="2" ParentId="19668" CreationDate="2019-10-02T16:21:07.003" Score="0" Body="&lt;p&gt;Open a text editor like code for example, then drag the icon of the color picker from the app launcher to the text editor, this will open the shortcut file for the app, the search for the line that starts like &quot;Exec=&quot;, you will get something like this:&#xA;&quot;Exec=com.github.jmoerman.go-for-it&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the part after the &quot;=&quot; is the comand to execute the color picker&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2019-10-02T16:21:07.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20868" PostTypeId="2" ParentId="20819" CreationDate="2019-10-02T16:34:27.450" Score="0" Body="&lt;p&gt;check the integrity of the ISO you downloaded, it could be that your elementary ISO is corrupted or maybe your USB is faulty&lt;/p&gt;&#xA;" OwnerUserId="4710" LastActivityDate="2019-10-02T16:34:27.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20871" PostTypeId="1" CreationDate="2019-10-03T08:13:11.700" Score="1" ViewCount="78" Body="&lt;p&gt;I am on Elementary OS 5.0 Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The new greeter screen worked fine for me when it was recently introduced.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, recently,when starting the computer from scratch (i.e. after a shutdown), I do not get a greeter screen. It goes straight to the desktop, then I get a message asking me to &quot;Enter password to unlock your login keyring&quot;.&#xA;If i then enter the password everything is fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I log out (as opposed to shutting down), I do get the greeter as normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get my greeter screen back when I switch on the computer following a shutdown?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: All is working well now, not sure why. All I did was change my password in System Settings, User Accounts, not sure if this is what cured it.&lt;/p&gt;&#xA;" OwnerUserId="15794" LastEditorUserId="15794" LastEditDate="2019-10-04T07:58:36.320" LastActivityDate="2019-10-05T06:20:25.707" Title="No greeter screen on startup (following shutdown) RESOLVED" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20872" PostTypeId="1" AcceptedAnswerId="20903" CreationDate="2019-10-03T13:54:52.267" Score="0" ViewCount="2130" Body="&lt;p&gt;I just read the September updates blog post and updated via App Center. I don't see anything added to Online Accounts; so, I'm assuming I still connect to the Nextcloud server through Files&gt;Connect to server. When I do that, I still get the same behavior as I previously would which was, after entering the information, the configuration screen comes back and nothing connects.&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2020-11-26T11:45:54.497" Title="Nextcloud integration" Tags="|pantheon-files|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20873" PostTypeId="1" CreationDate="2019-10-03T15:30:27.530" Score="1" ViewCount="130" Body="&lt;p&gt;Asus gaming laptop with 1920x1080p 120hz screen and Nvidia 1070.&#xA;Comes up unknown display and locks it at 800x600&#xA;if uninstall the driver the screen works fine at the full-res and 120hz&lt;/p&gt;&#xA;" OwnerUserId="19124" LastActivityDate="2024-03-04T08:02:15.227" Title="Unknown Display after installing nvidia driver" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20877" PostTypeId="1" CreationDate="2019-10-04T04:18:04.733" Score="0" ViewCount="75" Body="&lt;p&gt;Randomly, if I boot my system, on the login screen the task bar will be gone. When I get pasted the login screen the taskbar is still gone. The only way I can reboot is by holding down my power button since I can't get to the power button icon in the top right. sudo reboot just hangs. Not sure what is causing it. The next boot I do everything is fine. Anyone else experience this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Desktop&#xA;7th Gen Intel i5&#xA;16GB Ram&#xA;GTX 1080&#xA;Dual booting with Windows 10, but Windows and eOS are completely on different drives. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE/RESOLVED: This only happens when I choose restart from Windows and choose eOS from the boot manager. Its like the hardware is still in control by Windows. Fresh reboot seems to allow eOS to see the hardware and shows the toolbar. This is my working theory, but I now know how to avoid this issue. &lt;/p&gt;&#xA;" OwnerUserId="19109" LastEditorUserId="19109" LastEditDate="2019-10-04T13:45:11.790" LastActivityDate="2024-02-11T15:01:40.240" Title="Task Bar Randomly Disappears On Reboot (Resolved)" Tags="|settings|dual-boot|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20880" PostTypeId="2" ParentId="16812" CreationDate="2019-10-04T14:56:16.607" Score="3" Body="&lt;p&gt;ElementaryOs is based on Ubuntu, so always choose the Ubuntu method of installation.&#xA;If you want to install with the terminal, see the comment from Paul.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want a UI, and an easier interface, download Eddy in the Appcenter (&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.eddy/&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once Eddy is installed, clicking on any '.deb' file like the file for the Zoom software, will open this software. From Eddy, you can easily install Zoom.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps :)&lt;/p&gt;&#xA;" OwnerUserId="19074" LastActivityDate="2019-10-04T14:56:16.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20881" PostTypeId="1" CreationDate="2019-10-04T22:46:19.830" Score="1" ViewCount="140" Body="&lt;p&gt;I have been trying to make my computer look like MacOS Mojave and this is what I have so far: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i1sRn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i1sRn.jpg&quot; alt=&quot;Mac Mojave themed EOS Juno&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have everything as I want it &lt;strong&gt;except&lt;/strong&gt; I wanted to know if there was a more Mac-esque wingpanel theme &lt;strong&gt;and&lt;/strong&gt; is there a way to change the login screen to look like a Mac's login? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!!&lt;/p&gt;&#xA;" OwnerUserId="19134" LastActivityDate="2019-10-04T22:46:19.830" Title="How to get a macos theme for the login?" Tags="|release-juno|wingpanel|greeter|macintosh|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20884" PostTypeId="2" ParentId="20871" CreationDate="2019-10-05T06:20:25.707" Score="1" Body="&lt;p&gt;It works like this when you set some user account to &quot;Login automatically&quot;. This is an option from System Settings &gt; &#xA;User accounts just above 'change password' button of the account. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-10-05T06:20:25.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20885" PostTypeId="2" ParentId="20877" CreationDate="2019-10-05T06:52:35.300" Score="0" Body="&lt;p&gt;UPDATE/RESOLVED: This only happens when I choose restart from Windows and choose eOS from the boot manager. Its like the hardware is still in control by Windows. Fresh reboot seems to allow eOS to see the hardware and shows the toolbar. This is my working theory, but I now know how to avoid this issue.&lt;/p&gt;&#xA;" OwnerUserId="19109" LastActivityDate="2019-10-05T06:52:35.300" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20886" PostTypeId="1" CreationDate="2019-10-05T13:57:48.987" Score="0" ViewCount="27" Body="&lt;p&gt;I have 2 laptops running Elementary Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On one laptop, I have all the latest updates. When I select a few files/folders and hover over them, I cannot see a toast message which says how many items are selected and what is their size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the other laptop with is not updated, I can see the toast.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if there is a way to get the toast back.&lt;/p&gt;&#xA;" OwnerUserId="19136" LastActivityDate="2024-02-15T22:07:00.850" Title="Cannot see selected files info toast after updating" Tags="|pantheon-files|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20887" PostTypeId="1" CreationDate="2019-10-05T16:40:00.010" Score="0" ViewCount="332" Body="&lt;p&gt;I'm new to linux, and I tried booting elementary OS on my Swift 3 (SF314-57) without installing, first thing I noticed is trackpad is not working.&#xA;I read on another thread, in BIOS, trackpad should be set to basic, but I don't have that in this OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried ubuntu too, the touchpad works&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if I install Elementary OS on it will be able to solve the trackpad problem?&lt;/p&gt;&#xA;" OwnerUserId="19138" LastEditorUserId="16827" LastEditDate="2019-10-07T07:56:01.533" LastActivityDate="2024-03-15T07:03:00.330" Title="is it safe to install elementary OS on Acer Swift 3 SF-314-57" Tags="|release-juno|acer|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20892" PostTypeId="2" ParentId="20887" CreationDate="2019-10-06T13:42:16.533" Score="0" Body="&lt;p&gt;Elementary OS is based on Ubuntu. If you had no problems with the hardware on Ubuntu there's a strong indication that you'll be able to use it without any hiccups on Elementary too.&lt;/p&gt;&#xA;" OwnerUserId="6125" LastActivityDate="2019-10-06T13:42:16.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20894" PostTypeId="1" AcceptedAnswerId="21014" CreationDate="2019-10-06T16:33:11.057" Score="1" ViewCount="32" Body="&lt;p&gt;I liked very much the way you can colorize your files and folders, but I am thinking about reinstalling elementary OS. Is there some file I can copy to keep the colors after installation?&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastEditorUserId="16827" LastEditDate="2019-10-07T07:07:15.727" LastActivityDate="2019-10-23T18:39:30.020" Title="Is there a way to save file colors" Tags="|release-juno|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20896" PostTypeId="1" CreationDate="2019-10-07T09:01:23.783" Score="0" ViewCount="257" Body="&lt;p&gt;I use elementary OS but it cant connect to WiFi even when I go to network settings there is no option for WiFi but only Ethernet. Also it doesn't produce sound through the inbuilt speakers of the laptop even when I use the option in settings&lt;/p&gt;&#xA;" OwnerUserId="19152" LastActivityDate="2024-02-16T02:06:40.800" Title="Why can't my elementary OS scan or recognize WiFi networks? And doesn't play sounds?" Tags="|release-juno|wifi|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20897" PostTypeId="1" AcceptedAnswerId="20943" CreationDate="2019-10-07T14:02:35.837" Score="1" ViewCount="192" Body="&lt;p&gt;Can I manage my mail contacts in the Mail app that is shipped by default in Juno ? (pantehon-mail I guess, but since the application has no &quot;About&quot; menu entry I can't really tell) &lt;/p&gt;&#xA;" OwnerUserId="18972" LastActivityDate="2019-10-13T09:37:24.657" Title="Can Mail manage contacts?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20898" PostTypeId="1" CreationDate="2019-10-07T16:48:03.790" Score="1" ViewCount="389" Body="&lt;p&gt;In order to better be able to administer my workstation which is used by the entire household I have set up one administrator account and took away administrator privileges for all the others. However there was a problem with administering the linuxbrew packages already installed on the system and so I disabled the account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But instead of booting into the greeter the system boots straight into the disabled administrator account. That is a major security flaw. do you have any ideas how to rectify that and make Elementary boot directly into the greeter? &lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2024-02-14T03:08:21.050" Title="Elementary OS keeps on booting into a disabled administrator account" Tags="|boot|greeter|user-interface|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20899" PostTypeId="2" ParentId="20898" CreationDate="2019-10-07T17:20:47.873" Score="0" Body="&lt;p&gt;I am not quite sure about your situation, but what I can recommend you is to check out this administrator account in System settings &gt; User accounts - have you ticked in &quot;log in automatically&quot; for this account? Probably this is the reason why your computer log in into it automatically. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-10-07T17:20:47.873" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20901" PostTypeId="2" ParentId="20896" CreationDate="2019-10-07T23:06:23.323" Score="0" Body="&lt;p&gt;If your computer isn't showing WiFi at all, you may need to find a driver for your  WiFi card. Do a Google search for your make and model and see if someone has built something or has a solution for it. Ubuntu forums are really helpful for this since Juno is built on 18.04. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, sometimes my wifi just stops working and running service network-manager restart in the terminal resets everything and it starts to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not sure how to help with the sound issue because mine worked right out of the box, but you might want to approach it the same way you would for your WiFi card. &lt;/p&gt;&#xA;" OwnerUserId="19109" LastActivityDate="2019-10-07T23:06:23.323" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20902" PostTypeId="1" AcceptedAnswerId="20913" CreationDate="2019-10-08T03:37:16.947" Score="0" ViewCount="107" Body="&lt;p&gt;I'm trying to create a Window with a HeaderBar, and in the HeaderBar there will be a Switch. But, the switch gets sized vertically, and gets distorted (non proportional), is there some fix?&lt;a href=&quot;https://i.stack.imgur.com/OkP5t.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OkP5t.png&quot; alt=&quot;Switch on HeaderBar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastEditorDisplayName="user19148" LastEditDate="2019-10-08T04:16:06.323" LastActivityDate="2019-10-10T08:23:43.523" Title="VALA GTK Header Bar with switch distorted" Tags="|release-juno|gtk|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20903" PostTypeId="2" ParentId="20872" CreationDate="2019-10-08T09:03:57.053" Score="0" Body="&lt;p&gt;While nothing to offer in regards to the libcloudproviders update to files (because it makes no difference here, on my system, at all) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds like you would like to connect to nextcloud via Webdav. Let me help you do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open files, and click -&gt; Connect to Server&lt;/p&gt;&#xA;&#xA;&lt;p&gt;choose whichever fits (Https if you have set up nextcloud with SSL or HTTP if not)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in the serverfield input: url or ip address as appropriate. no protocol spec. e.g.:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nextcloud.yourdomain.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; 192.168.0.20&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then under dir/folder, input:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/remote.php/webdav/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then input your username/password. If you set it up with a selfsigned certificate, you will be prompted to accept an untrusted certificate. Then it should be connected. but please notice: This webdav connection will not be seen by files as anything related to nextcloud, as that is abstracted away when using something like webdav (and that is really what such protocols are for)&lt;/p&gt;&#xA;" OwnerUserId="9615" LastEditorUserId="9615" LastEditDate="2019-10-09T16:47:38.433" LastActivityDate="2019-10-09T16:47:38.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20904" PostTypeId="1" CreationDate="2019-10-08T09:16:08.050" Score="0" ViewCount="131" Body="&lt;p&gt;So trying to increasingly run my desktop with modern settings, I am installing flatpaks to replace .debs&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm having some issues actually running them. This is an attempt at running the nextcloud client&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak run org.nextcloud.Nextcloud &#xA;Invalid MIT-MAGIC-COOKIE-1 keyqt.qpa.xcb: could not connect to display :99.0&#xA;qt.qpa.plugin: Could not load the Qt platform plugin &quot;xcb&quot; in &quot;&quot; even though it was found.&#xA;This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.&#xA;&#xA;Available platform plugins are: eglfs, minimal, minimalegl, offscreen, vnc, wayland-egl, wayland, wayland-xcomposite-egl, wayland-xcomposite-glx, xcb.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and this is trying to run the Midori browser:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak run org.midori_browser.Midori &#xA;Gtk-Message: 11:11:40.557: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Invalid MIT-MAGIC-COOKIE-1 keyUnable to init server: Kunne ikke forbinde: Opkobling nægtet&#xA;&#xA;(midori:2): Gtk-WARNING **: 11:11:40.560: cannot open display: :99.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This seems to have something to do with X11 and displays, but after doing a bit of google-fu, I can't seem to find a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any hints?&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-10-08T09:16:08.050" Title="Issues running flatpaks" Tags="|applications|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20905" PostTypeId="1" CreationDate="2019-10-08T12:43:53.253" Score="1" ViewCount="792" Body="&lt;p&gt;I can't seem to get the eOS installation boot USB to work on the new XPS 7390 DE-- no matter what, I get a black screen after the GRUB menu (all selected options).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Creating the live USB on macOS, eOS, Ubuntu and Windows, including using Startup Disk Creator on the pre-installed Ubuntu. I created a Ubuntu live USB from Mac and Ubuntu and both boot to a working system, though without Wifi drivers.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Added to the &lt;code&gt;linux&lt;/code&gt; string in boot options, following &lt;a href=&quot;https://wiki.archlinux.org/index.php/Dell_XPS_13_2-in-1_(7390)&quot; rel=&quot;nofollow noreferrer&quot;&gt;this advice&lt;/a&gt;. Specifically, I selected &lt;code&gt;Install ...&lt;/code&gt; and pressed &lt;code&gt;e&lt;/code&gt;. In the &lt;code&gt;linux   ... quiet splash ---&lt;/code&gt; screen, I replaced &lt;code&gt;quiet splash&lt;/code&gt; with &lt;code&gt;modprobe.blacklist=intel_lpss_pci&lt;/code&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I replaced the above string with &lt;code&gt;nomodeset&lt;/code&gt; &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I replaced it with &lt;code&gt;intel_lpss_pci.blacklist=1&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I double-checked the BIOS options: secure boot was off&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Has anyone been able to do this yet? Is there a way to replace the kernel in the eOS installer with &lt;code&gt;14.15.0-1042-oem&lt;/code&gt;? This is the kernel running in the pre-installed Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="3657" LastActivityDate="2019-10-14T15:04:50.880" Title="Installation on new Dell XPS 7390 Clamshell" Tags="|system-installation|dell|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20906" PostTypeId="1" AcceptedAnswerId="20907" CreationDate="2019-10-08T14:00:57.407" Score="1" ViewCount="121" Body="&lt;p&gt;Have installed elementary Juno on a new build. Trying to install Tweaks, below message pops up every time I open app center. Dont necessarily want tweaks now, just want to remove the following.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release' does not have a Release file. W: Updating from such a repository can't be done securely, and is therefore disabled by default. W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="19159" LastEditorUserId="16827" LastEditDate="2019-10-12T11:36:32.097" LastActivityDate="2019-10-12T11:36:32.097" Title="'Doesn't have a release file' message upon Tweaks installation" Tags="|release-juno|software-installation|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20907" PostTypeId="2" ParentId="20906" CreationDate="2019-10-08T15:02:21.690" Score="2" Body="&lt;p&gt;That means you added a PPA that doesn't work with the current version of elementary. To delete it do &lt;code&gt;sudo add-apt-repository --remove ppa:mpstark/elementary-tweaks-daily&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-10-08T15:02:21.690" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20909" PostTypeId="2" ParentId="20886" CreationDate="2019-10-09T10:42:31.947" Score="0" Body="&lt;p&gt;There is nothing you can do to get the overlay in List view at the moment - you need to switch to Icon View.  I have raise this issue: &lt;a href=&quot;https://github.com/elementary/files/issues/1060&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1060&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-10-09T10:42:31.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20910" PostTypeId="2" ParentId="19717" CreationDate="2019-10-09T16:51:43.037" Score="0" Body="&lt;p&gt;You said in a comment it was on your own domain. Rather than using a self signed certificate, I'd encourage you to use &lt;a href=&quot;https://letsencrypt.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Let's Encrypt&lt;/a&gt; I'm using it for my own nextcloud, as well as a home developed webapp. They've got great tools and docs to help you set it up, and even auto refresh it at 90 day intervals.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What they give you is a FREE (as in beer, at least) signed ssl cert. That you may even use commercially.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-10-09T16:51:43.037" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20911" PostTypeId="2" ParentId="20896" CreationDate="2019-10-09T17:40:58.357" Score="0" Body="&lt;p&gt;Depending on the age of your system, Installing the Ubuntu Bionic Beaver &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;hardware enablement stack&lt;/a&gt; might help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise try following the &lt;a href=&quot;https://help.ubuntu.com/stable/ubuntu-help/net-wireless-troubleshooting-hardware-check.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;troubleshooting wireless on Ubuntu&lt;/a&gt;  (since elementary OS uses Ubuntu for it's base)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if it is a broadcom card there's a good chance you'll need to install an external driver.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-10-09T17:40:58.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20912" PostTypeId="1" CreationDate="2019-10-09T18:56:27.210" Score="2" ViewCount="62" Body="&lt;p&gt;I've been trying to set up a dual boot on my Macbook Pro with a version of elementaryOS and the current version of macOS using rEFInd, but I've been having some issues and I'm not sure where the process went wrong. I'd like to ask you for some help, because maybe you'd know what I'm doing wrong.&#xA;I have a 2018 Macbook Pro 13 inch, with macOS 10.14 working, I've installed rEFInd via the installer provided on SourceForge, and burned the .iso onto a pen drive using Etcher (in a Windows 10 PC).&#xA;The problem is that when I reboot my Macbook, it's supposed to present me the option of where I want to boot my Macbook from, but it only shows the default macOS drive, and not the pen drive.&#xA;I don't know if I was clear enough, so if you need any more information, please let me know.&lt;/p&gt;&#xA;" OwnerUserId="19170" LastActivityDate="2019-10-09T18:56:27.210" Title="I'm having issues dual-booting eOS on a Macbook!" Tags="|boot|dual-boot|macbook|refind|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20913" PostTypeId="2" ParentId="20902" CreationDate="2019-10-10T08:23:43.523" Score="0" Body="&lt;p&gt;You need to set its valign property to center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Gtk.Switch toggle = new Gtk.Switch();&#xA;toggle.valign = Gtk.Align.CENTER;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also, it's worth having a look at &lt;a href=&quot;https://valadoc.org/granite/Granite.ModeSwitch.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Granite.ModeSwitch&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I strongly recommend &lt;a href=&quot;https://www.youtube.com/channel/UCbmBY_XYZqCa2G0XmFA7ZWg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Alessandro Castellani&lt;/a&gt;'s &lt;a href=&quot;https://www.youtube.com/playlist?list=PLriKzYyLb28mn2lS3c5yqMHgLREi7kR9-&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala Tutorials&lt;/a&gt;. It covers everithing you need to know to get you started.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-10T08:23:43.523" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20914" PostTypeId="2" ParentId="20750" CreationDate="2019-10-10T14:03:02.320" Score="1" Body="&lt;p&gt;same question dude, i just found this &#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/d3mxfi/change_new_greeters_background/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/d3mxfi/change_new_greeters_background/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19175" LastActivityDate="2019-10-10T14:03:02.320" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20915" PostTypeId="1" AcceptedAnswerId="20922" CreationDate="2019-10-10T20:55:38.573" Score="0" ViewCount="52" Body="&lt;p&gt;Wired network is working, but I see a strange icon, what does it mean?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NmCyq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NmCyq.png&quot; alt=&quot;Network icon is showing as three dots between brackets&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/htTlZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/htTlZ.png&quot; alt=&quot;The same as previous image&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Network icon is showing as three dots between brackets&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Previous network icon:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/b0isl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b0isl.png&quot; alt=&quot;Old network icon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastEditorDisplayName="user19148" LastEditDate="2019-10-11T13:37:11.673" LastActivityDate="2019-10-11T13:37:11.673" Title="Strange icon on network" Tags="|networking|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20916" PostTypeId="1" CreationDate="2019-10-10T22:31:06.770" Score="0" ViewCount="130" Body="&lt;p&gt;When I click at the suspend button the screen goes black, then I hear a bell ringing (probably wired network turning on) and at the end the screen returns to the login prompt (pantheon).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened after upgrading with apt-get distro-upgrade (maybe some ubuntu configuration?).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this some problem with ACPI? Is there some easy configuration that will fix it?&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastActivityDate="2024-02-18T10:06:05.777" Title="Elementary OS does not suspend" Tags="|release-juno|updates|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20917" PostTypeId="2" ParentId="5536" CreationDate="2019-10-10T22:49:19.663" Score="1" Body="&lt;p&gt;What if you try to delete them from Files? What happens?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same problem in the past, it was related to encoding of file names.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a program &lt;code&gt;ntfsfix&lt;/code&gt; that can fix some ntfs problems:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ntfsfix /dev/sd(your partition here)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;According to the man pages:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ntfsfix is a utility that fixes some common NTFS problems.  ntfsfix is NOT a Linux version of chkdsk.  It only repairs some fundamental NTFS inconsistencies, resets the NTFS journal file and schedules an NTFS consistency check for the first boot into Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may run &lt;code&gt;ntfsfix&lt;/code&gt; on an NTFS volume if you think it was damaged by Windows or some other way and it cannot be mounted.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Also there is this interesting link, could be helpful:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.cyberciti.biz/tips/delete-remove-files-with-inode-number.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cyberciti.biz/tips/delete-remove-files-with-inode-number.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another interesting link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.linuxquestions.org/questions/linux-newbie-8/can-two-files-have-the-same-inode-number-423094/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxquestions.org/questions/linux-newbie-8/can-two-files-have-the-same-inode-number-423094/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastEditorUserId="16827" LastEditDate="2019-10-12T11:24:56.583" LastActivityDate="2019-10-12T11:24:56.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20918" PostTypeId="1" CreationDate="2019-10-11T00:17:42.470" Score="1" ViewCount="59" Body="&lt;p&gt;Excellencies&#xA;I really like your operating system for its simplicity and appearance.&#xA;I'm a fan of elementary operating systems, but I had three headaches.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All due to updates to the operating system, it was on three occasions that I was without the operating system.&#xA;I had to install all over again, losing the saved data.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today, October 11, 2019, I made an update and ran out of system, what happens is as follows:&#xA;The PC starts and has the cursor in the upper left corner and you're done, it doesn't do anything else, it gets the black screen, and it doesn't boot ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for letting me know how to remedy the situation.&#xA;This message was written with CD Live because I have no operating system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cordial greetings,&#xA;Joaquim&lt;/p&gt;&#xA;" OwnerUserId="11825" LastEditorUserId="11825" LastEditDate="2019-10-11T09:00:14.447" LastActivityDate="2019-10-12T00:36:35.980" Title="updates to the operating system" Tags="|updates|system|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20919" PostTypeId="1" CreationDate="2019-10-11T00:30:16.620" Score="1" ViewCount="23" Body="&lt;p&gt;Color tags in elementary are consistently failing after reboot or restart 'Files' application. This behavior only recently started happening.  I am running a 'vanilla' Juno release.  I keep elementary up to date (see below for configuration information).  Is this a known problem?  If so, is there a fix in work?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Operating System: elementary OS 5.0 Juno&lt;br&gt;&#xA;Kernel: Linux 4.15.0-65-generic&lt;br&gt;&#xA;Architecture: x86-64  &lt;/p&gt;&#xA;" OwnerUserId="19177" LastEditorUserId="16827" LastEditDate="2019-10-12T11:37:12.783" LastActivityDate="2019-10-12T11:37:12.783" Title="Files' 'color tags' no longer persistent?" Tags="|release-juno|files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20920" PostTypeId="1" CreationDate="2019-10-11T02:44:08.543" Score="1" ViewCount="41" Body="&lt;p&gt;Just installed DevilSpie according to this topic:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/396/how-can-i-view-the-desktop&quot;&gt;How can I view the desktop?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is, every time I hit the hot corner, plank disappears. How can I use the specific commands listed in there without minimizing Plank or panel?&lt;/p&gt;&#xA;" OwnerUserId="19178" LastActivityDate="2019-10-12T11:16:41.710" Title="Just installed DevilSpie created a hotcorner and the dock disappear everytime I use it" Tags="|plank|hot-corners|show-desktop|" AnswerCount="1" CommentCount="0" ClosedDate="2019-10-12T11:19:16.613" ContentLicense="CC BY-SA 4.0" />
  <row Id="20921" PostTypeId="1" AcceptedAnswerId="20925" CreationDate="2019-10-11T03:28:27.347" Score="0" ViewCount="116" Body="&lt;p&gt;when I open the app store in EOS Juno I am getting these errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to Fetch Updates&#xA;&#xA;This may have been caused by external, manually added software repositories or a corrupted sources file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: http://packages.mate-desktop.org/repo/ubuntu precise InRelease is not (yet) available (Could not resolve 'packages.mate-desktop.org')&#xA;E: http://packages.mate-desktop.org/repo/ubuntu precise InRelease is not (yet) available (Could not resolve 'packages.mate-desktop.org')&#xA;E: The repository 'http://ppa.launchpad.net/heathbar/super-wingpanel/ubuntu bionic Release' does not have a Release file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have not installed anything, via the AppStore or Apt/Apt-get for a while.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I figured I would run &lt;code&gt;apt get update&lt;/code&gt; to fix it, but when i did I got these errors:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    Err:22 http://ppa.launchpad.net/heathbar/super-wingpanel/ubuntu bionic Release &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;    Err:23 http://ppa.launchpad.net/heathbar/super-wingpanel-daily/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done                      &#xA;E: The repository 'http://ppa.launchpad.net/heathbar/super-wingpanel/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/heathbar/super-wingpanel-daily/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I saw &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14778/loki-release-404-not-found-problem&quot;&gt;this&lt;/a&gt; link, even though it deals with EOS Loki I thought it might work. I ran this with no issues, then I ran &lt;code&gt;sudo apt update&lt;/code&gt; again but with the same results. I am currently trying to make EOS look like a mac, so I have an icon them, plymouth theme, and a (in progress) login theme. I tried to install super-wingpanel, but it did not work. I think that is what is throwing issues but I have no idea how to delete this file or if that is what I need to do.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;UPDATE&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I ran the fix that a-tokarev sugested. It fixed most of my issues but now when I open the AppStore it is throwing this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: http://packages.mate-desktop.org/repo/ubuntu precise InRelease is not (yet) available (Could not resolve 'packages.mate-desktop.org')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have no idea why this is throwing an error. Apt is also throwing errors when I try to update.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Failed to fetch http://packages.mate-desktop.org/repo/ubuntu/dists/precise/InRelease  Could not resolve 'packages.mate-desktop.org'&#xA;W: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I can install new packages via apt and I can upgrade, but I cannot update. I can install apps through the AppStore, but every other second it is throwing those errors listed at the top. I am thinking this is an easy fix, but if it is not I probably will back up all my files and use a fresh install. Any help is appreciated. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="19134" LastEditorUserId="19134" LastEditDate="2019-10-11T16:34:36.983" LastActivityDate="2019-10-12T09:18:56.417" Title="404 Not Found error while running Apt and AppStore EOS Juno" Tags="|release-juno|updates|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20922" PostTypeId="2" ParentId="20915" CreationDate="2019-10-11T08:46:50.613" Score="1" Body="&lt;p&gt;It's the default wired connection icon form the &lt;a href=&quot;https://github.com/elementary/icons&quot; rel=&quot;nofollow noreferrer&quot;&gt;specially designed elementary icons set&lt;/a&gt;, nothing to worry about.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-11T08:46:50.613" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20923" PostTypeId="2" ParentId="20814" CreationDate="2019-10-11T09:01:26.427" Score="0" Body="&lt;p&gt;It's been a while since forevermore solved his problem and, because they did not post their solution...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install Realtek d723 WiFi&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-`uname -r`&#xA;sudo apt-get install git build-essential dkms&#xA;git clone -b extended --single-branch https://github.com/lwfinger/rtlwifi_new.git&#xA;sudo dkms add rtlwifi_new&#xA;sudo dkms install rtlwifi-new/0.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For extra details and other methods of installing the driver: &lt;a href=&quot;https://subinsb.com/install-realtek-d723-wifi-driver-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Install Realtek d723 WiFi driver for GNU/Linux&lt;/a&gt;&#xA;Also, more detailed instructions can be found in &lt;a href=&quot;https://github.com/lwfinger/rtlwifi_new&quot; rel=&quot;nofollow noreferrer&quot;&gt;the driver's repository&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I used the above repository to fix  rtl8822be, and also had to create a new file (&lt;code&gt;sudo nano /etc/modprobe.d/r8822be.conf&lt;/code&gt;) containing &lt;code&gt;options r8822be aspm=0&lt;/code&gt;...&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-10-11T09:13:19.577" LastActivityDate="2019-10-11T09:13:19.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20924" PostTypeId="2" ParentId="16804" CreationDate="2019-10-11T09:34:02.657" Score="0" Body="&lt;p&gt;Trying to open &lt;a href=&quot;http://localhost:631/admin/&quot; rel=&quot;nofollow noreferrer&quot;&gt;CUPS&lt;/a&gt; in Chrome will NOT work (no authentication window is displayed)! This is a Chrome &quot;feature&quot;, where they decided to prevent popups from and dialogs when accessing non-https locations. It works though in Firefox and Epiphany. I recommend Firefox, because Epiphany seems to have some issues displaying the button labels :D&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-11T09:34:02.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20925" PostTypeId="2" ParentId="20921" CreationDate="2019-10-11T09:59:57.873" Score="0" Body="&lt;p&gt;&lt;strong&gt;PART 1&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As &lt;code&gt;super-wingpanel&lt;/code&gt; software appears to be quite old, no wonder its repository (PPA) doesn't have proper release file - i. e. the version, that's been specifically compiled for Ubuntu 18.04 (codename 'bionic', on which elementary OS 5 is based).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this error (i. e. to stop super-wingpanel's further attempts to get non-existent updates, while keeping it installed on your system), remove super-wingpanel's PPA from your system list. To do it, execute:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:heathbar/super-wingpanel&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;PART 2&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error/warning messages containing &lt;code&gt;packages.mate-desktop.org&lt;/code&gt; mean that &lt;code&gt;apt-get update&lt;/code&gt; can't fetch (download) the list of packages, required to update &lt;code&gt;mate-desktop&lt;/code&gt;software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As this error is obviously an external server's IP issue and not elementary OS' fault, you have two options to fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 1.&lt;/strong&gt; If you don't use &lt;code&gt;mate-desktop&lt;/code&gt; for anything, &lt;a href=&quot;https://askubuntu.com/a/837818&quot;&gt;uninstall it&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 2.&lt;/strong&gt; If you still use it, you can &lt;a href=&quot;https://superuser.com/a/1337955&quot;&gt;comment out&lt;/a&gt; its update URLs, so &lt;code&gt;apt-get update&lt;/code&gt; won't use them during the update process. In this case, if &lt;code&gt;mate-desktop&lt;/code&gt; devs will eventually fix their package server's IP issue, you can uncomment the URLs and update your &lt;code&gt;mate-desktop&lt;/code&gt; software.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-10-12T09:18:56.417" LastActivityDate="2019-10-12T09:18:56.417" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20926" PostTypeId="2" ParentId="20862" CreationDate="2019-10-11T10:05:01.737" Score="1" Body="&lt;p&gt;I recommend using CUPS to install the printer:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Visit &lt;a href=&quot;http://localhost:631/admin/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost:631/admin/&lt;/a&gt; in Firefox (it will NOT work in Chrome -&gt; see &lt;a href=&quot;https://elementaryos.stackexchange.com/a/20924/9445&quot;&gt;cannot configure CUPS on elementary OS juno&#xA;&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Click on Add Printer&lt;/li&gt;&#xA;&lt;li&gt;Login with your elementary OS user and password&lt;/li&gt;&#xA;&lt;li&gt;Choose your printer's connection protocol&lt;/li&gt;&#xA;&lt;li&gt;Click Continue&lt;/li&gt;&#xA;&lt;li&gt;Type your printer's path in the Connection filed&lt;/li&gt;&#xA;&lt;li&gt;Click on Continue&lt;/li&gt;&#xA;&lt;li&gt;Type a name and description&lt;/li&gt;&#xA;&lt;li&gt;Click on Continue&lt;/li&gt;&#xA;&lt;li&gt;Click on Browse, select your PPD file and click on Add Printer&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You could also install CUPS GUI, from Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install system-config-printer&#xA;&#xA;system-config-printer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-11T10:05:01.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20927" PostTypeId="2" ParentId="9262" CreationDate="2019-10-11T12:41:34.340" Score="0" Body="&lt;p&gt;So I had to follow the link below before I could install WINEHQ because I keep getting the command not found. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/add-apt-repository-command-not-found/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/add-apt-repository-command-not-found/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after you fix the command not found issue go back to wineHQ and the installs will work. &lt;/p&gt;&#xA;" OwnerUserId="19181" LastActivityDate="2019-10-11T12:41:34.340" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20928" PostTypeId="1" CreationDate="2019-10-11T12:58:49.223" Score="1" ViewCount="59" Body="&lt;p&gt;I installed Elementary OS 5.0 Juno a month ago and everything worked smoothly and fine. About a week ago, the screen kept flickering (brightness goes up and down and the screen get distorted every now and then). I have an Intel graphics card which I tried to update (don't know how to remove and and reinstall) and nothing happened. I also opened the BIOS settings page for 15 mins to make sure the screen itself is ok and the problem is with the OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some OS details:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;NAME=&quot;Ubuntu&quot;&#xA;VERSION=&quot;18.04.3 LTS (Bionic Beaver)&quot;&#xA;ID=ubuntu&#xA;ID_LIKE=debian&#xA;PRETTY_NAME=&quot;Ubuntu 18.04.3 LTS&quot;&#xA;VERSION_ID=&quot;18.04&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19182" LastActivityDate="2019-10-11T12:58:49.223" Title="Screen Flickering Elementary OS 5.0 Juno" Tags="|release-juno|graphic-drivers|graphics|intel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20929" PostTypeId="1" CreationDate="2019-10-11T16:31:51.670" Score="1" ViewCount="129" Body="&lt;p&gt;I'm trying to increase the refresh rate of my monitor on eOS 5.0&#xA;As other posts suggested I tried to use xrandr to adjust the refresh rate, from 60Hz to my monitors native 75Hz. According to the system it works, but actually feels more sluggish than 60Hz. The cursor does feel smoother, but everything else in the system does not. Any suggestions?&#xA;I'm running with Radeon RX 480 graphics, if that makes a difference.&lt;/p&gt;&#xA;" OwnerUserId="19184" LastEditorUserId="16827" LastEditDate="2019-10-12T11:34:30.157" LastActivityDate="2019-10-12T11:34:30.157" Title="Adjust refresh rate?" Tags="|release-juno|display|amd|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20930" PostTypeId="1" AcceptedAnswerId="20931" CreationDate="2019-10-11T17:17:31.543" Score="1" ViewCount="83" Body="&lt;p&gt;I installed an Icon theme with elementary tweaks, I guess it was broken because the settings force closed, wingpanel disappeared and most of my apps won't start anymore... &#xA;Right now I can only open firefox and the terminal...&#xA;Is there a way to either delete the broken icons folder, or change the icon theme through the terminal?&lt;/p&gt;&#xA;" OwnerUserId="19184" LastActivityDate="2019-10-12T09:27:38.823" Title="Broke my install while installing a theme" Tags="|system|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20931" PostTypeId="2" ParentId="20930" CreationDate="2019-10-11T19:01:19.140" Score="2" Body="&lt;p&gt;Good thing Terminal still works :) Open it and paste the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.interface icon-theme 'elementary'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The default icon theme should now be restored.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-11T19:01:19.140" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="20932" PostTypeId="2" ParentId="20920" CreationDate="2019-10-11T19:14:26.197" Score="0" Body="&lt;p&gt;You need to tell devilspie to ignore plank and wingpanel. In the minimize.ds file you should have something like:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(if&#xA;     (begin&#xA;        (not(is(application_name) &quot;wingpanel&quot;)))&#xA;(if&#xA;    (begin&#xA;        (not(is(application_name) &quot;plank&quot;)))&#xA;(begin&#xA;    (minimize)&#xA;    (quit))&#xA;))&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT: I also updated the instructions in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/396/how-can-i-view-the-desktop&quot;&gt;How can I view the desktop?&lt;/a&gt;, it is quite a nifty feature and I think it should be available in elementary OS by default.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-10-12T11:16:41.710" LastActivityDate="2019-10-12T11:16:41.710" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20933" PostTypeId="2" ParentId="20916" CreationDate="2019-10-11T21:01:12.707" Score="0" Body="&lt;p&gt;For me at least, doing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#echo EHC1 &amp;gt; /proc/acpi/wakeup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Fixed it. But it was the Bluetooth waking the machine after a second or two of suspend. I'd cat the file, and try disabling the values one at a time, followed by an attempt at suspending the machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changes to the file are NOT persistent, so everything in it will be changed to default on reboot. If you find the change that makes the difference, make a systemd .service files that runs the command upon boot.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-10-11T21:01:12.707" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="20935" PostTypeId="2" ParentId="20930" CreationDate="2019-10-12T09:27:38.823" Score="0" Body="&lt;p&gt;The reset to defaults is in the about menu in Administration.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2019-10-12T09:27:38.823" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20938" PostTypeId="1" AcceptedAnswerId="20953" CreationDate="2019-10-12T12:15:33.117" Score="0" ViewCount="59" Body="&lt;p&gt;I use elementary OS 5.0 Juno with 5.2.16-050216-generic kernel but Flash Player doesn't work on all browsers (Google Chrome, Firefox, Opera, Chromium).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did all of the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install flashplugin-installer&#xA;sudo apt install browser-plugin-freshplayer-pepperflash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it doesn't' work still. What can I do else?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use Lenovo Legion y530 laptop.&lt;/p&gt;&#xA;" OwnerUserId="19187" LastEditorUserId="16827" LastEditDate="2019-10-14T11:57:24.910" LastActivityDate="2019-10-14T11:58:25.413" Title="Flash doesnt work, even in Google Chrome - SOLVED" Tags="|release-juno|drivers|google-chrome|video-player|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20940" PostTypeId="1" CreationDate="2019-10-12T15:53:09.650" Score="2" ViewCount="301" Body="&lt;p&gt;I tried connecting my Bose QC35 Bluetooth headphones to my Dell XPS 13, on a new installation of elementaryOS Juno. I hear a hissing noise in the headphones, which does not change in its volume. When I start playing music, it is very distorted and poor in quality.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've used Ubuntu before, so anytime I encounter this, I know that I would have to go to Sound settings and switch to using the &quot;High Fidelity Playback (A2DP Sink)&quot; mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I went to my sound settings in eOS, all I see is this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tK2vl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tK2vl.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't see a setting to change that. Next, after some googling, I learnt that I could setup PulseAudio Volume Control and switch it in there in the  &quot;Configuration&quot; tab. But when I do that, nothing seems to happen! I still encounter poor audio quality. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get this to work? Are there any other solutions to this that I am missing?&lt;/p&gt;&#xA;" OwnerUserId="19191" LastEditorUserId="19191" LastEditDate="2019-10-12T15:59:26.377" LastActivityDate="2024-02-20T05:05:35.900" Title="Distorted sound quality via Bose QC35 headphones on Juno" Tags="|release-juno|sound|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20941" PostTypeId="2" ParentId="20905" CreationDate="2019-10-12T19:06:41.330" Score="1" Body="&lt;p&gt;There is a workaround, but it requires a wired connection and Secure Boot enabled to get started.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a bug in the &lt;code&gt;intel_lpss&lt;/code&gt; driver which causes booting to fail with Secure Boot disabled. This applies to both the installation media and the finished installation. In BIOS settings, you need Secure Boot &lt;strong&gt;enabled&lt;/strong&gt; for the installation. We'll disable it later. However, you need to do the fixes described later so you can turn off Secure Boot, allowing WiFi drivers and other drivers to be installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're trying to dual boot, make sure you have Windows installed already and you shrunk the Windows partition to create free space for elementary. Otherwise, you can just go through the installer as normal.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Kernel patch&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The easy fix described on &lt;a href=&quot;https://wiki.archlinux.org/index.php/Dell_XPS_13_2-in-1_(7390)&quot; rel=&quot;nofollow noreferrer&quot;&gt;ArchWiki&lt;/a&gt; is to blacklist the &lt;code&gt;intel_lpss_pci&lt;/code&gt; module. However, it doesn't work with the Ubuntu-flavored kernel. You'll need a mainline kernel. And if you just blacklist the module, you'll lose support for touchscreen, 802.11ac WiFi, and other useful things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best fix is to recompile the Linux kernel with a patched &lt;code&gt;intel_lpss&lt;/code&gt; driver.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/torvalds/linux.git&#xA;&#xA;cd linux&#xA;&#xA;git checkout v5.3 # or latest stable&#xA;&#xA;wget https://pastebin.com/raw/sqPv8ShP&#xA;&#xA;git apply sqPv8ShP&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The source of the patch is &lt;a href=&quot;https://www.reddit.com/r/Dell/comments/cx0fkc/xps_13_2_in_1_7390_linux_boot_attempt/eyxevml/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this Reddit thread&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Build the patched kernel using the second method in &lt;a href=&quot;https://askubuntu.com/a/163348&quot;&gt;this answer&lt;/a&gt;. Then install the generated dpkg files. The compilation will take 30-120 minutes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point you should be able to boot using your new kernel. In the GRUB menu, select &quot;Advanced options for Elementary OS&quot; and you should be able to see your new kernel and boot from it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Verify your computer boots properly and if so, you probably want to set your new kernel to be the default. Follow &lt;a href=&quot;https://unix.stackexchange.com/questions/198003/set-default-kernel-in-grub&quot;&gt;this guide&lt;/a&gt; to do so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should also disable Secure Boot at this point.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Wifi&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The XPS uses a Killer AX1650 wireless chip. The drivers are not included in the installation by default. You can follow &lt;a href=&quot;https://support.killernetworking.com/knowledge-base/killer-ax1650-in-debian-ubuntu-16-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this guide&lt;/a&gt; to install them.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Bluetooth&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You already have the &lt;code&gt;linux-firmware&lt;/code&gt; repository from the last step, so&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp -r linux-firmware/intel/* /lib/firmware/intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and reboot. Your WiFi and Bluetooth should be working now.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Remaining drivers&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Open AppCenter and update to get the 5.1 update and drivers for various peripherals, including video acceleration. Reboot again and check out the new greeter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Original instructions are on &lt;a href=&quot;https://alexisanand.com/blog/install-elementary-os-51-juno-on-dell-xps-13-2-in-1-7390/&quot; rel=&quot;nofollow noreferrer&quot;&gt;my blog&lt;/a&gt;. It's written for the 2-in-1 but it seems like it should work for the clamshell version too.&lt;/p&gt;&#xA;" OwnerUserId="19193" LastEditorUserId="19193" LastEditDate="2019-10-14T15:04:50.880" LastActivityDate="2019-10-14T15:04:50.880" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20942" PostTypeId="1" CreationDate="2019-10-13T00:20:22.730" Score="1" ViewCount="285" Body="&lt;p&gt;I am new to Linux and StackExchange, and I'm having trouble finding my SD card so I can import my photos into GIMP for editing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried various commands using the terminal and I've looked in the Files application, but I can't find my SD card. The SD card is a SanDisk 128gb SD card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer is an HP Envy x360 Convertible Laptop 15m-dr0xx and my SD card is plugged into the reader on its side.&lt;/p&gt;&#xA;" OwnerUserId="19196" LastActivityDate="2019-11-12T11:02:45.450" Title="How do I access the photos on my SD card on elementary OS?" Tags="|files|disk-management|mount|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20943" PostTypeId="2" ParentId="20897" CreationDate="2019-10-13T09:37:24.657" Score="2" Body="&lt;p&gt;Nope. It can auto complete when filling in known addresses though. I can't, however tell you exactly how that works, though I believe it uses the evolution backend.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-10-13T09:37:24.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20944" PostTypeId="2" ParentId="20942" CreationDate="2019-10-13T09:59:26.033" Score="2" Body="&lt;p&gt;All connected media (CD, flash disk, SD) should automatically appear in this section in Files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mKytQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mKytQ.png&quot; alt=&quot;Files → Left panel → Devices&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try to be patient, it can theoretically take somewhere around a minute if your computer has a bad day &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't appear, chances are you're missing a driver for the SD reader. Try running &lt;code&gt;lspci&lt;/code&gt; and look for the model of your reader. It's probably &lt;code&gt;Realtech RTS####&lt;/code&gt; (where &lt;code&gt;#&lt;/code&gt; are some digits). Then search for a corresponding driver on the &lt;a href=&quot;https://www.realtek.com/en/component/zoo/category/card-reader-solutions-card-reader-controllers-software&quot; rel=&quot;nofollow noreferrer&quot;&gt;Realtech website&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the correct driver isn't there, you're in a bad luck. Now you're allowed to swear and be disrespectful of those Windows-centric manufacturers that can't even provide proper drivers for their hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're feeling adventurous, there is &lt;a href=&quot;https://askubuntu.com/a/492515/134205&quot;&gt;an issue on AskUbuntu&lt;/a&gt; which solved the same problem for a different model of HP Envy. You can follow the instructions there and compile the driver yourself. Which isn't exactly easy for a newcoming user, luckily there's &lt;a href=&quot;https://askubuntu.com/q/177329/134205&quot;&gt;a sort of tutorial&lt;/a&gt; available.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2019-10-13T10:24:55.143" LastActivityDate="2019-10-13T10:24:55.143" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20945" PostTypeId="1" CreationDate="2019-10-13T10:20:58.047" Score="1" ViewCount="36" Body="&lt;p&gt;Very new linux user here (3 days experience).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have 2 screens, that i have setup properly, not without having to fiddle with the little visual tool provided by default with elementary OS (screen positioning can have a tendency to go all over the place).&#xA;They have 2 different resolutions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On startup, my secondary screen won't start, as if with bad resolution. I then have to go into the tool (which displays the right resolution - super weird), then take a lower one, apply, and go back to the right resolution, which works (and still, i have to fiddle a bit with the positioning of the screen for some reason).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Graphics Card:&lt;/strong&gt; NVIDIA GK104 [GeForce GTX 760 OEM] Display Server: x11 (X.Org 1.19.6 ) drivers: nouveau (unloaded: modesetting,fbdev,vesa) Resolution: 1920x1080@60.00hz, 2560x1440@59.95hz OpenGL: renderer: NVE4 version: 4.3 Mesa 19.0.8&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that it will be a good enough description, i am really just getting started ^^.&lt;/p&gt;&#xA;" OwnerUserId="19199" LastEditorUserId="16827" LastEditDate="2019-10-18T05:01:28.730" LastActivityDate="2019-10-18T05:01:28.730" Title="Dual screen resolution - Startup problem" Tags="|release-juno|graphic-drivers|resolution|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="20946" PostTypeId="1" CreationDate="2019-10-13T10:52:10.033" Score="0" ViewCount="33" Body="&lt;p&gt;I have a mixed environment; Windows and Linux.  Linux is made up of a number of distros and flavours;  Vanilla Ubuntu server, ElementaryOS, Vanilla Arch and some network devices that run BusyBox (Ubiquity).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my ElementaryOS PC, I am wirelessly connected.  When I try to contact a local Ubuntu server, I am given my external IP address (both of these servers have an externally available FQDN DNS entry with the same name).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, if I disconnect from the network and then reconnect, I have about 10 seconds where I can ping the local name and am presented with the INTERNAL IP address.  After this ten seconds or so, any further pings return the external IP address.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not happen from any of the other Linux boxes... so, I have to assume that it is something to do with the services on this ElementaryOS PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have added DNS entries to systemd/resolved.conf as advised elsewhere.  I have added a defined entry for DNS in NetworkManager (which I do no want to do... I want to use the DHCP settings) amongst other things...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not looking for a work around,  am looking for a fix.  I am happy to change network managers if that can solve things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The thing I don't get is what is the process that is changing the results- it works correctly for ten seconds then goes haywire...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts gratefully received.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gary&lt;/p&gt;&#xA;" OwnerUserId="19200" LastActivityDate="2019-10-14T03:44:28.437" Title="Local Name serving not working correctly" Tags="|networking|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20947" PostTypeId="1" CreationDate="2019-10-13T14:44:50.727" Score="0" ViewCount="28" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SONBL.png&quot; alt=&quot;problem network&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;walid@walid-MS-7680:~$ sudo lshw -C network&#xA;[sudo] Mot de passe de walid :             &#xA;  *-network DÉSACTIVÉ       &#xA;       description: Ethernet interface&#xA;       produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       fabriquant: Realtek Semiconductor Co., Ltd.&#xA;       identifiant matériel: 0&#xA;       information bus: pci@0000:04:00.0&#xA;       nom logique: enp4s0&#xA;       version: 06&#xA;       numéro de série: 8c:89:a5:31:8d:de&#xA;       taille: 10Mbit/s&#xA;       capacité: 1Gbit/s&#xA;       bits: 64 bits&#xA;       horloge: 33MHz&#xA;       fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt  10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI  duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       ressources: irq:16 portE/S:e000(taille=256) mémoire:d0004000-d0004fff mémoire:d0000000d0003fff&#xA;  *-network DÉSACTIVÉ&#xA;       description: Ethernet interface&#xA;       identifiant matériel: 3&#xA;       nom logique: enp0s29u1u4&#xA;       numéro de série: 26:e0:0d:be:43:64&#xA;       fonctionnalités: ethernet physical&#xA;       configuration: broadcast=yes driver=cdc_ether driverversion=22-Aug-2005 firmware=ZTE  CDC Ethernet Device link=no multicast=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19192" LastEditorUserId="9445" LastEditDate="2019-10-14T12:09:28.120" LastActivityDate="2019-10-14T12:09:28.120" Title="Problem network échoué" Tags="|networking|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20948" PostTypeId="2" ParentId="20940" CreationDate="2019-10-13T21:12:37.943" Score="0" Body="&lt;p&gt;Had some similar problem with a full bluetooth headphone.. Installed PulseEffects, did some Tweaks and it worked fine.. later on the problem came back but I think you could try that.&lt;/p&gt;&#xA;" OwnerUserId="19178" LastActivityDate="2019-10-13T21:12:37.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20949" PostTypeId="1" AcceptedAnswerId="20960" CreationDate="2019-10-14T01:32:58.793" Score="2" ViewCount="80" Body="&lt;p&gt;How to move files inside Juno/Pantheon &quot;Files&quot; if blocked by permissions? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to use the graphic interface tabs to drag things around, but I don't see an equivalent of &quot;sudo mv…&quot; for this action. Workaround is copy/paste &quot;Files&quot; paths into &quot;Terminal&quot; commands, which works okay. Similar blocks exist inside other graphic tools that create directory modifications, like unarchive, which I hope an answer may also apply to. &lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2019-10-14T14:53:27.323" Title="permissions override inside Files" Tags="|release-juno|pantheon-files|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20951" PostTypeId="1" CreationDate="2019-10-14T03:13:45.733" Score="0" ViewCount="847" Body="&lt;p&gt;I've just installed elementary OS 5 Juno, my problem is that after my notebook suspends it never wake's up or return from the suspending state, doesn't matter if is suspended because the lid was closed or because inactivity it never wake's up, the only i can do is power off the computer with power button and thats a problem, does anyone have the same problem or knows solution? &#xA;My system is:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Lenovo ThinkPad A485&lt;/li&gt;&#xA;&lt;li&gt;Ryzen 7 2700u pro&lt;/li&gt;&#xA;&lt;li&gt;Graphics VEGA 10&lt;/li&gt;&#xA;&lt;li&gt;RAM 16 GB&lt;/li&gt;&#xA;&lt;li&gt;Swap file size 16 gb &lt;/li&gt;&#xA;&lt;li&gt;Linux kernel 4.15&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="8681" LastEditorUserId="8681" LastEditDate="2019-10-19T20:04:00.253" LastActivityDate="2020-11-12T22:04:35.463" Title="System won't wake up after suspend (black screen)" Tags="|release-juno|suspend|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20953" PostTypeId="2" ParentId="20938" CreationDate="2019-10-14T03:49:54.217" Score="1" Body="&lt;p&gt;According to @dzierzak&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;It had changed on my Elementary OS stock Kernel (4.15.X), I updated&#xA;  Flash by Google Chrome (chrome://components) and it works on all&#xA;  kernels now.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19060" LastEditorUserId="16827" LastEditDate="2019-10-14T11:58:25.413" LastActivityDate="2019-10-14T11:58:25.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20956" PostTypeId="1" CreationDate="2019-10-14T05:01:57.107" Score="1" ViewCount="3260" Body="&lt;p&gt;I recently installed elementary OS 5 Juno on my new laptop and i notice that the kernel installed is 4.15.0-65-generic and i was thinking in upgrading the kernel because I'm experiencing some issues that may be because of hardware compatibility but i don't know  if upgrading the kernel may be a bad practice in EOS or may broke up some features of the OS. Does any one knows if is recommended or has experience upgrading ESO kernel? do you have some advice like use ukuu o another tool?&lt;/p&gt;&#xA;" OwnerUserId="8681" LastActivityDate="2019-10-27T01:27:06.257" Title="It is recommended to upgrade elementary OS 5 kernel?" Tags="|release-juno|updates|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20957" PostTypeId="2" ParentId="20956" CreationDate="2019-10-14T07:00:49.957" Score="0" Body="&lt;p&gt;As far as I understand, kernels do not exist in a vacuum. They rely on the rest of the system components to be compatible with their newer architecture.&#xA;Even if newer kernel might be somewhat faster or have new cool features, there's some risk of instability, when you insert a newer kernel into an older system, as newer kernels might not necessarily be fully backward-compatible with the older system components.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for me, I always want my system to be as stable and reliable as it can be. That's why I choose to never install kernel versions which haven't been approved for use with my current OS version by the OS devs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, if I were experiencing critical hardware compatibility issues which might be solved by installing a newer kernel, I would install it, because in that case it could make my system more stable (or bootable, at least).&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="17985" LastEditDate="2019-10-14T07:10:24.803" LastActivityDate="2019-10-14T07:10:24.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20959" PostTypeId="1" CreationDate="2019-10-14T14:12:12.977" Score="2" ViewCount="197" Body="&lt;p&gt;I recently updated from Loki to Juno. I copied my home folder over as is. As I was copying the home folder over, after Juno had installed itself, I marked all the same-name folders to merge and all old files to over-write the new ones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Loki I used to be able to control the volume on a per-program basis, now this is missing. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/JjlPJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JjlPJ.png&quot; alt=&quot;I used to be able to change or mute specific programs&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Along with that, I can no longer configure Bluetooth media share settings. In the solutions mentioned here I have seen that I should have a tab in the media share section that lets me configure the Bluetooth share.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8HQqC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8HQqC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/NxmDN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NxmDN.png&quot; alt=&quot;Apparently it is missing a Bluetooth section&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to extensively scour this forum for a solution but up until now I haven't found an exact solution and all the similar solutions haven't helped.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a step I executed &#xA;&lt;code&gt;sudo apt install switchboard-plug-*&lt;/code&gt; but that helped nothing. It had helped earlier in Loki as a solution for a similar problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I bring back my missing options?&lt;/p&gt;&#xA;" OwnerUserId="19207" LastActivityDate="2019-10-14T14:12:12.977" Title="Settings are missing options and settings after update to Juno" Tags="|release-juno|settings|sound|bluetooth|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20960" PostTypeId="2" ParentId="20949" CreationDate="2019-10-14T14:53:27.323" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;BAD IDEA WARNING!&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I believe you will achieve the desired effect by running Files with sudo permissions. To do that, got to &lt;code&gt;Applications&lt;/code&gt; -&gt; right-click on &lt;code&gt;Files&lt;/code&gt; -&gt; &lt;code&gt;New Window as Administrator&lt;/code&gt; -&gt; input your password in the authentication window -&gt; Files is running. You'll be able to move, edit and delete any file you want (EVEN THE CRITICALLY IMPORTANT ONES!)&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-10-14T14:53:27.323" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20964" PostTypeId="1" CreationDate="2019-10-14T21:54:09.407" Score="0" ViewCount="364" Body="&lt;p&gt;After clean install and update of graphics driver (Nvidia), I have no brightness control in elementary OS. I have seen elementary OS on another system and it has brightness in the menu bar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Why don't I have one? I also don't have brightness in my settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After searching through this board, I found a few responses but no definitive answers.&lt;/p&gt;&#xA;" OwnerDisplayName="user19210" LastEditorUserId="16827" LastEditDate="2019-10-18T04:53:50.333" LastActivityDate="2019-10-18T12:43:41.730" Title="elementary OS on MacBook Pro (2009) missing brightness control" Tags="|release-juno|nvidia|brightness|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="20970" PostTypeId="1" CreationDate="2019-10-16T13:50:24.770" Score="0" ViewCount="66" Body="&lt;p&gt;Using instructions from &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3087/run-script-on-resume-from-suspend&quot;&gt;this answer&lt;/a&gt; I've created and placed a script at &lt;strong&gt;/etc/pm/sleep.d&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;msi-keyboard.sh:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;msi-keyboard -m normal -c left,red,high -c middle,purple,high -c right,sky,high&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, after resuming it doesn't get called. Anyone have a solution on how to execute commands or a script on resume from suspend?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I've disabled login on resume/screensaver&lt;/p&gt;&#xA;" OwnerUserId="19114" LastActivityDate="2024-02-23T04:07:40.770" Title="Execute Script On Resume From Suspend" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20971" PostTypeId="1" CreationDate="2019-10-16T18:54:09.530" Score="0" ViewCount="585" Body="&lt;p&gt;I have recently installed elementary OS 5.0 juno. I could not find any wireless network for accessing internet. Unfortunately I was not able to install wireless driver, moreover I tried almost every solution posted in this group for that issue but they did not solve my problems also. Here is output of wireless-info.txt file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;########## wireless info START ##########&#xA;&#xA;Report from: 16 Oct 2019 18:49 CEST +0200&#xA;&#xA;Booted last: 16 Oct 2019 00:00 CEST +0200&#xA;&#xA;Script from: 22 Oct 2018 03:34 UTC +0000&#xA;&#xA;##### release ###########################&#xA;&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.0 Juno&#xA;Release:    5.0&#xA;Codename:   juno&#xA;&#xA;##### kernel ############################&#xA;&#xA;Linux 4.15.0-65-generic #74-Ubuntu SMP Tue Sep 17 17:06:04 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux&#xA;&#xA;Parameters: ro, quiet, splash, vt.handoff=1&#xA;&#xA;##### desktop ###########################&#xA;&#xA;Pantheon&#xA;&#xA;##### lspci #############################&#xA;&#xA;02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)&#xA;    Subsystem: Hewlett-Packard Company BCM43142 802.11b/g/n [103c:804a]&#xA;    Kernel modules: wl&#xA;&#xA;03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 07)&#xA;    Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller [103c:80cc]&#xA;    Kernel driver in use: r8169&#xA;&#xA;##### lsusb #############################&#xA;&#xA;Bus 002 Device 003: ID 04f2:b52d Chicony Electronics Co., Ltd &#xA;Bus 002 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. &#xA;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 001 Device 003: ID 0a5c:216d Broadcom Corp. &#xA;Bus 001 Device 002: ID 0438:7900 Advanced Micro Devices, Inc. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&#xA;##### PCMCIA card info ##################&#xA;&#xA;##### rfkill ############################&#xA;&#xA;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&#xA;##### secure boot #######################&#xA;&#xA;SecureBoot enabled&#xA;&#xA;##### lsmod #############################&#xA;&#xA;hp_wmi                 16384  0&#xA;sparse_keymap          16384  1 hp_wmi&#xA;wmi_bmof               16384  0&#xA;cfg80211              622592  0&#xA;wmi                    24576  2 hp_wmi,wmi_bmof&#xA;&#xA;##### interfaces ########################&#xA;&#xA;[/etc/network/interfaces]&#xA;auto lo&#xA;iface lo inet loopback&#xA;&#xA;##### ifconfig ##########################&#xA;&#xA;1: lo: &amp;lt;LOOPBACK,UP,LOWER_UP&amp;gt; mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000&#xA;    link/loopback &amp;lt;MAC address&amp;gt; brd &amp;lt;MAC address&amp;gt;&#xA;    inet 127.0.0.1/8 scope host lo&#xA;       valid_lft forever preferred_lft forever&#xA;    inet6 ::1/128 scope host &#xA;       valid_lft forever preferred_lft forever&#xA;2: enp3s0: &amp;lt;BROADCAST,MULTICAST,UP,LOWER_UP&amp;gt; mtu 1500 qdisc fq_codel state UP group default qlen 1000&#xA;    link/ether &amp;lt;MAC 'enp3s0' [IF1]&amp;gt; brd &amp;lt;MAC address&amp;gt;&#xA;    inet 192.168.0.43/24 brd 192.168.0.255 scope global dynamic noprefixroute enp3s0&#xA;       valid_lft 85026sec preferred_lft 85026sec&#xA;    inet6 2a02:ab88:153f:1780:193:1823:a722:a49a/64 scope global temporary dynamic &#xA;       valid_lft 603428sec preferred_lft 84449sec&#xA;    inet6 2a02:ab88:153f:1780:3358:7e73:48a0:899/64 scope global dynamic mngtmpaddr noprefixroute &#xA;       valid_lft 1039523sec preferred_lft 434723sec&#xA;    inet6 fe80::9c03:6c36:544d:eaa7/64 scope link noprefixroute &#xA;       valid_lft forever preferred_lft forever&#xA;&#xA;##### iwconfig ##########################&#xA;&#xA;lo        no wireless extensions.&#xA;&#xA;enp3s0    no wireless extensions.&#xA;&#xA;##### route #############################&#xA;&#xA;default via 192.168.0.1 dev enp3s0 proto dhcp metric 100 &#xA;169.254.0.0/16 dev enp3s0 scope link metric 1000 &#xA;192.168.0.0/24 dev enp3s0 proto kernel scope link src 192.168.0.43 metric 100 &#xA;&#xA;##### resolv.conf #######################&#xA;&#xA;[644 root '/etc/resolv.conf']&#xA;search local&#xA;nameserver 127.0.0.53&#xA;&#xA;##### network managers ##################&#xA;&#xA;Installed:&#xA;&#xA;    NetworkManager&#xA;&#xA;Running:&#xA;&#xA;root       645     1  0 18:15 ?        00:00:01 /usr/sbin/NetworkManager --no-daemon&#xA;&#xA;##### NetworkManager info ###############&#xA;&#xA;GENERAL.DEVICE:                         enp3s0&#xA;GENERAL.TYPE:                           ethernet&#xA;GENERAL.NM-TYPE:                        NMDeviceEthernet&#xA;GENERAL.VENDOR:                         Realtek Semiconductor Co., Ltd.&#xA;GENERAL.PRODUCT:                        RTL810xE PCI Express Fast Ethernet controller&#xA;GENERAL.DRIVER:                         r8169&#xA;GENERAL.DRIVER-VERSION:                 2.3LK-NAPI&#xA;GENERAL.FIRMWARE-VERSION:               --&#xA;GENERAL.HWADDR:                         &amp;lt;MAC 'enp3s0' [IF1]&amp;gt;&#xA;GENERAL.MTU:                            1500&#xA;GENERAL.STATE:                          100 (connected)&#xA;GENERAL.REASON:                         0 (No reason given)&#xA;GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:02.5/0000:03:00.0/net/enp3s0&#xA;GENERAL.IP-IFACE:                       enp3s0&#xA;GENERAL.IS-SOFTWARE:                    no&#xA;GENERAL.NM-MANAGED:                     yes&#xA;GENERAL.AUTOCONNECT:                    yes&#xA;GENERAL.FIRMWARE-MISSING:               no&#xA;GENERAL.NM-PLUGIN-MISSING:              no&#xA;GENERAL.PHYS-PORT-ID:                   --&#xA;GENERAL.CONNECTION:                     Wired connection 1&#xA;GENERAL.CON-UUID:                       5003a7d2-6419-33fc-b9c7-abbadab8e098&#xA;GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/2&#xA;GENERAL.METERED:                        no (guessed)&#xA;CAPABILITIES.CARRIER-DETECT:            yes&#xA;CAPABILITIES.SPEED:                     100 Mb/s&#xA;CAPABILITIES.IS-SOFTWARE:               no&#xA;CAPABILITIES.SRIOV:                     no&#xA;WIRED-PROPERTIES.CARRIER:               on&#xA;IP4.ADDRESS[1]:                         192.168.0.43/24&#xA;IP4.GATEWAY:                            192.168.0.1&#xA;IP4.ROUTE[1]:                           dst = 0.0.0.0/0, nh = 192.168.0.1, mt = 100&#xA;IP4.ROUTE[2]:                           dst = 192.168.0.0/24, nh = 0.0.0.0, mt = 100&#xA;IP4.ROUTE[3]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000&#xA;IP4.DNS[1]:                             192.168.0.1&#xA;IP4.DOMAIN[1]:                          local&#xA;DHCP4.OPTION[1]:                        domain_name_servers = 192.168.0.1&#xA;DHCP4.OPTION[2]:                        requested_domain_search = 1&#xA;DHCP4.OPTION[3]:                        requested_time_offset = 1&#xA;DHCP4.OPTION[4]:                        host_name = HP&#xA;DHCP4.OPTION[5]:                        requested_domain_name = 1&#xA;DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1&#xA;DHCP4.OPTION[7]:                        dhcp_lease_time = 86400&#xA;DHCP4.OPTION[8]:                        expiry = 1571329597&#xA;DHCP4.OPTION[9]:                        requested_netbios_scope = 1&#xA;DHCP4.OPTION[10]:                       next_server = 192.168.0.1&#xA;DHCP4.OPTION[11]:                       requested_wpad = 1&#xA;DHCP4.OPTION[12]:                       dhcp_message_type = 5&#xA;DHCP4.OPTION[13]:                       requested_interface_mtu = 1&#xA;DHCP4.OPTION[14]:                       domain_name = local&#xA;DHCP4.OPTION[15]:                       ip_address = 192.168.0.43&#xA;DHCP4.OPTION[16]:                       requested_subnet_mask = 1&#xA;DHCP4.OPTION[17]:                       requested_static_routes = 1&#xA;DHCP4.OPTION[18]:                       subnet_mask = 255.255.255.0&#xA;DHCP4.OPTION[19]:                       requested_domain_name_servers = 1&#xA;DHCP4.OPTION[20]:                       broadcast_address = 192.168.0.255&#xA;DHCP4.OPTION[21]:                       requested_ntp_servers = 1&#xA;DHCP4.OPTION[22]:                       requested_netbios_name_servers = 1&#xA;DHCP4.OPTION[23]:                       requested_broadcast_address = 1&#xA;DHCP4.OPTION[24]:                       requested_routers = 1&#xA;DHCP4.OPTION[25]:                       requested_ms_classless_static_routes = 1&#xA;DHCP4.OPTION[26]:                       routers = 192.168.0.1&#xA;DHCP4.OPTION[27]:                       network_number = 192.168.0.0&#xA;DHCP4.OPTION[28]:                       requested_host_name = 1&#xA;DHCP4.OPTION[29]:                       dhcp_server_identifier = 192.168.0.1&#xA;IP6.ADDRESS[1]:                         2a02:ab88:153f:1780:193:1823:a722:a49a/64&#xA;IP6.ADDRESS[2]:                         2a02:ab88:153f:1780:3358:7e73:48a0:899/64&#xA;IP6.ADDRESS[3]:                         fe80::9c03:6c36:544d:eaa7/64&#xA;IP6.GATEWAY:                            fe80::20b:ff:fe00:add0&#xA;IP6.ROUTE[1]:                           dst = 2a02:ab88:153f:1780::/64, nh = ::, mt = 100&#xA;IP6.ROUTE[2]:                           dst = ::/0, nh = fe80::20b:ff:fe00:add0, mt = 100&#xA;IP6.ROUTE[3]:                           dst = ff00::/8, nh = ::, mt = 256, table=255&#xA;IP6.ROUTE[4]:                           dst = fe80::/64, nh = ::, mt = 256&#xA;IP6.ROUTE[5]:                           dst = fe80::/64, nh = ::, mt = 100&#xA;IP6.DNS[1]:                             2a02:ab88:153f:1780:20b:ff:fe00:add0&#xA;DHCP6.OPTION[1]:                        dhcp6_name_servers = 2a02:ab88:153f:1780:20b:ff:fe00:add0&#xA;DHCP6.OPTION[2]:                        requested_dhcp6_domain_search = 1&#xA;DHCP6.OPTION[3]:                        dhcp6_server_id = 0:1:0:1:25:36:ec:9c:22:27:88:34:5e:fb&#xA;DHCP6.OPTION[4]:                        requested_dhcp6_client_id = 1&#xA;DHCP6.OPTION[5]:                        requested_dhcp6_name_servers = 1&#xA;DHCP6.OPTION[6]:                        dhcp6_preference = 0&#xA;DHCP6.OPTION[7]:                        dhcp6_client_id = 0:4:9a:b6:b4:c6:18:11:c6:73:3d:32:5d:53:ef:69:d0:ef&#xA;CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}&#xA;CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   5003a7d2-6419-33fc-b9c7-abbadab8e098 | Wired connection 1&#xA;&#xA;##### NetworkManager.state ##############&#xA;&#xA;[main]&#xA;NetworkingEnabled=true&#xA;WirelessEnabled=true&#xA;WWANEnabled=true&#xA;&#xA;##### NetworkManager config #############&#xA;&#xA;[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]&#xA;[connection]&#xA;wifi.powersave = 3&#xA;&#xA;[[/etc/NetworkManager/NetworkManager.conf]]&#xA;[main]&#xA;plugins=ifupdown,keyfile&#xA;[ifupdown]&#xA;managed=false&#xA;[device]&#xA;wifi.scan-rand-mac-address=no&#xA;&#xA;[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]&#xA;[main]&#xA;dns=systemd-resolved&#xA;&#xA;[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]&#xA;[keyfile]&#xA;unmanaged-devices=*,except:type:wifi,except:type:wwan&#xA;&#xA;[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]&#xA;[connectivity]&#xA;uri=http://connectivity-check.ubuntu.com/&#xA;&#xA;[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]&#xA;[device-mac-addr-change-wifi]&#xA;match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl&#xA;wifi.scan-rand-mac-address=no&#xA;wifi.cloned-mac-address=preserve&#xA;ethernet.cloned-mac-address=preserve&#xA;&#xA;##### NetworkManager profiles ###########&#xA;&#xA;##### Netplan config ####################&#xA;&#xA;[/etc/netplan/01-network-manager-all.yaml]&#xA;network:&#xA;  version: 2&#xA;  renderer: NetworkManager&#xA;&#xA;##### iw reg get ########################&#xA;&#xA;Region: Europe/Budapest (based on set time zone)&#xA;&#xA;global&#xA;country 00: DFS-UNSET&#xA;    (2402 - 2472 @ 40), (N/A, 20), (N/A)&#xA;    (2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN&#xA;    (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN&#xA;    (5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN&#xA;    (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN&#xA;    (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN&#xA;    (5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN&#xA;    (57240 - 63720 @ 2160), (N/A, 0), (N/A)&#xA;&#xA;##### iwlist channels ###################&#xA;&#xA;lo        no frequency information.&#xA;&#xA;enp3s0    no frequency information.&#xA;&#xA;##### iwlist scan #######################&#xA;&#xA;lo        Interface doesn't support scanning.&#xA;&#xA;enp3s0    Interface doesn't support scanning.&#xA;&#xA;##### module infos ######################&#xA;&#xA;[cfg80211]&#xA;filename:       /lib/modules/4.15.0-65-generic/kernel/net/wireless/cfg80211.ko&#xA;description:    wireless configuration support&#xA;license:        GPL&#xA;author:         Johannes Berg&#xA;srcversion:     268278B721485146AC7CB84&#xA;depends:        &#xA;retpoline:      Y&#xA;intree:         Y&#xA;name:           cfg80211&#xA;vermagic:       4.15.0-65-generic SMP mod_unload &#xA;signat:         PKCS#7&#xA;signer:         &#xA;sig_key:        &#xA;sig_hashalgo:   md4&#xA;parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)&#xA;parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)&#xA;parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)&#xA;&#xA;##### module parameters #################&#xA;&#xA;[cfg80211]&#xA;bss_entries_limit: 1000&#xA;cfg80211_disable_40mhz_24ghz: N&#xA;ieee80211_regdom: 00&#xA;&#xA;##### /etc/modules ######################&#xA;&#xA;##### modprobe options ##################&#xA;&#xA;[/etc/modprobe.d/amd64-microcode-blacklist.conf]&#xA;blacklist microcode&#xA;&#xA;[/etc/modprobe.d/blacklist-ath_pci.conf]&#xA;blacklist ath_pci&#xA;&#xA;[/etc/modprobe.d/blacklist-bcm43.conf]&#xA;blacklist b43&#xA;blacklist b43legacy&#xA;blacklist ssb&#xA;blacklist bcm43xx&#xA;blacklist brcm80211&#xA;blacklist brcmfmac&#xA;blacklist brcmsmac&#xA;blacklist bcma&#xA;&#xA;[/etc/modprobe.d/blacklist.conf]&#xA;blacklist evbug&#xA;blacklist usbmouse&#xA;blacklist usbkbd&#xA;blacklist eepro100&#xA;blacklist de4x5&#xA;blacklist eth1394&#xA;blacklist snd_intel8x0m&#xA;blacklist snd_aw2&#xA;blacklist i2c_i801&#xA;blacklist prism54&#xA;blacklist bcm43xx&#xA;blacklist garmin_gps&#xA;blacklist asus_acpi&#xA;blacklist snd_pcsp&#xA;blacklist pcspkr&#xA;blacklist amd76x_edac&#xA;&#xA;[/etc/modprobe.d/blacklist-rare-network.conf]&#xA;alias net-pf-3 off&#xA;alias net-pf-6 off&#xA;alias net-pf-9 off&#xA;alias net-pf-11 off&#xA;alias net-pf-12 off&#xA;alias net-pf-19 off&#xA;alias net-pf-21 off&#xA;alias net-pf-36 off&#xA;&#xA;[/etc/modprobe.d/broadcom-sta-common.conf]&#xA;blacklist b43&#xA;blacklist b43legacy&#xA;blacklist b44&#xA;blacklist bcma&#xA;blacklist brcm80211&#xA;blacklist brcmsmac&#xA;blacklist ssb&#xA;install wl /sbin/modprobe --ignore-install wl $CMDLINE_OPTS&#xA;&#xA;[/etc/modprobe.d/intel-microcode-blacklist.conf]&#xA;blacklist microcode&#xA;&#xA;[/etc/modprobe.d/iwlwifi.conf]&#xA;remove iwlwifi \&#xA;(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \&#xA;&amp;amp;&amp;amp; /sbin/modprobe -r mac80211&#xA;&#xA;##### rc.local ##########################&#xA;&#xA;grep: /etc/rc.local: No such file or directory&#xA;&#xA;##### pm-utils ##########################&#xA;&#xA;##### udev rules ########################&#xA;&#xA;##### dmesg #############################&#xA;&#xA;[  657.419046] r8169 0000:03:00.0 enp3s0: link down&#xA;[  723.022243] r8169 0000:03:00.0 enp3s0: link up&#xA;&#xA;########## wireless info END ############&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19219" LastEditorUserId="16827" LastEditDate="2019-10-18T04:57:57.150" LastActivityDate="2019-10-18T04:57:57.150" Title="Wireless network not shown in elementary OS 5.0 Juno" Tags="|release-juno|wifi|networking|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="20972" PostTypeId="2" ParentId="20956" CreationDate="2019-10-16T19:03:01.630" Score="4" Body="&lt;p&gt;You can install the Ubuntu 18.04 LTS Hardware Enablement (HWE) packages in order to get a newer kernel. I've been using this on my Elementary systems for half a year or so without issues (Elementary 5.0 Juno is built from Ubuntu 18.04). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At time of typing this my main system is using 5.0.0-31-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HTH&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;To enable HWE, type the following command in the Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6372" LastEditorUserId="12115" LastEditDate="2019-10-27T01:27:06.257" LastActivityDate="2019-10-27T01:27:06.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20974" PostTypeId="2" ParentId="20970" CreationDate="2019-10-16T21:23:31.227" Score="0" Body="&lt;p&gt;Make sure script executable. It should be look like this I guess.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;case &quot;$1&quot; in&#xA;    resume|thaw)&#xA;        msi-keyboard -m normal -c left,red,high -c middle,purple,high -c right,sky,high&#xA;        ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18424" LastActivityDate="2019-10-16T21:23:31.227" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20975" PostTypeId="1" CreationDate="2019-10-17T07:36:30.450" Score="0" ViewCount="89" Body="&lt;p&gt;Whenever I play spotify, song change notifications cause my whole display to blank, and then come back in a way that looks like pantheon crashing. If I'm playing an album with some shorter tracks and two notifications come relatively close together pantheon crashes entirely and my only option is a hard reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone had this problem before, is there anything I can do about this? I have tried uninstalling and reinstalling spotify, but that didn't work. I'm using the official deb.&lt;/p&gt;&#xA;" OwnerUserId="15477" LastActivityDate="2019-10-17T07:36:30.450" Title="Spotify song change notification crashes pantheon" Tags="|pantheon|crash|spotify|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="20976" PostTypeId="1" AcceptedAnswerId="20980" CreationDate="2019-10-17T09:06:33.980" Score="1" ViewCount="66" Body="&lt;p&gt;I've been using elementaryOS on both my desktop and laptop computers for a few years now, and have never experienced any problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently I upgraded my desktop's graphics card from an old Radeon 7790 to a RX580. Upon starting elementaryOS everything was fine until I noticed the screen would get corrupt and the PC would lockup, not even capslock would respond. I tried reinstalling the system and switching to oibaf, but the problem would persist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After my options ran out I decided to install Ubuntu, and never had a problem since, that was a few months ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This month I decided to give elementaryOS another try, and the problem still exists, however not as often as it would. Also, the computer recovered from one of the instances it had happened after blinking the screen a few times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it still happens randomly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also it has never happened on ubuntu or windows. This makes me think it's elementaryOS related.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any diagnostics I can run to check this?&#xA;Here's a picture of the corruption: &lt;a href=&quot;https://i.stack.imgur.com/88cag.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/88cag.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19222" LastActivityDate="2019-10-17T16:47:56.717" Title="Random screen corruption after changing graphics card" Tags="|release-juno|display|graphic-drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20977" PostTypeId="1" AcceptedAnswerId="20978" CreationDate="2019-10-17T11:58:42.797" Score="1" ViewCount="467" Body="&lt;p&gt;Really hoping someone can advise on this. I have installed xampp and it works perfectly. I have create a launcher for the app. It works as well. however I have to specify that the launcher for Xampp be used with Terminal, in order to input my password. What I would like to do is bypass the terminal input of my password, so that I can input the password in a pop up like the other apps do.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bellow is my app launcher content&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Name=Xampp Control Panel&#xA;Comment=Start or Stop XAMPP&#xA;Exec=sudo /opt/lampp/manager-linux-x64.run&#xA;Icon=/opt/lampp/favicon.ico&#xA;Categories=Application;Development;Web&#xA;Version=1.0&#xA;Type=Application&#xA;Terminal=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="692" LastActivityDate="2019-10-31T07:35:48.323" Title="Xampp Launcher advice needed" Tags="|launcher|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20978" PostTypeId="2" ParentId="20977" CreationDate="2019-10-17T12:45:18.720" Score="2" Body="&lt;p&gt;Replace &lt;code&gt;sudo&lt;/code&gt; in the Exec line with &lt;code&gt;pkexec&lt;/code&gt;. In the past, you could have used &lt;code&gt;gksu&lt;/code&gt;, but it is no longer available in distros based on ubuntu 18.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I got it working using the below .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env xdg-open&#xA;[Desktop Entry]&#xA;Comment=Start or Stop XAMPP&#xA;Name=XAMPP Control Panel&#xA;Exec=sh -c &quot;pkexec env DISPLAY=$DISPLAY XAUTHORITY=$XAUTHORITY /opt/lampp/manager-linux-x64.run&quot;&#xA;Encoding=UTF-8&#xA;Terminal=false&#xA;Name[en_US]=XAMPP Control Panel&#xA;Comment[en_US]=Start or Stop XAMPP&#xA;Type=Application&#xA;Icon=/opt/lampp/htdocs/favicon.ico&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gv2UU.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gv2UU.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-10-31T07:35:48.323" LastActivityDate="2019-10-31T07:35:48.323" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20979" PostTypeId="2" ParentId="20977" CreationDate="2019-10-17T12:47:34.543" Score="0" Body="&lt;p&gt;You don't need to use sudo permissions to execute an app stored on the /opt directory. So changing &lt;code&gt;Exec=sudo /opt/lampp/manager-linux-x64.run&lt;/code&gt; with &lt;code&gt;Exec=/opt/lampp/manager-linux-x64.run&lt;/code&gt; should work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may also need to grant ownership to the current user to that directory in case it was wrongly assigned. You can do that from terminal with &lt;code&gt;sudo chown -R user /opt/lampp/&lt;/code&gt;, where &lt;code&gt;user&lt;/code&gt; is your username.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-10-17T12:47:34.543" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20980" PostTypeId="2" ParentId="20976" CreationDate="2019-10-17T16:47:56.717" Score="0" Body="&lt;p&gt;@&lt;strong&gt;RodrigoN&lt;/strong&gt;, if your kernel version (which can be displayed in Terminal via &lt;code&gt;uname -r&lt;/code&gt; command) is below 5.0.x, and your initial Ubuntu distro was 18.04 or 18.04.1, you don't have HWE installed. As stated &lt;a href=&quot;https://www.howtogeek.com/436507/how-to-install-the-linux-5.0-update-on-ubuntu-18.04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&quot;The [HWE] stack consists of a newer Linux kernel [meaning, v5.0], X.org graphical server, and graphics drivers. These weren’t automatically installed on existing systems &amp;lt;...&gt; If you installed Ubuntu 18.04 using the Ubuntu 18.04.2 installer, you will automatically get the Ubuntu 18.04.3 update featuring the new Linux kernel. &lt;strong&gt;If you installed Ubuntu 18.04 using Ubuntu 18.04.1 or the original Ubuntu 18.04, you won’t automatically get the new Linux kernel.&lt;/strong&gt;&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;To install HWE on Ubuntu 18.04 desktop PC, execute:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-17T16:47:56.717" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="20981" PostTypeId="1" CreationDate="2019-10-17T21:17:43.443" Score="0" ViewCount="42" Body="&lt;p&gt;Is there a patch available for sudo in elementary OS? I see there's one available for Ubuntu, but I can't find anything about elementary OS. I'm running elementary OS, and it's completely updated, but it's still showing the sudo version as 1.8.21p2, and from what I can tell it should be version 1.8.28 in order to be safe from this vulnerability.&lt;br&gt;&#xA;If there's nothing available specifically for elementary OS, what would happen if I installed the Ubuntu version (&lt;a href=&quot;https://usn.ubuntu.com/4154-1/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://usn.ubuntu.com/4154-1/&lt;/a&gt;) ?&lt;/p&gt;&#xA;" OwnerUserId="19225" LastEditorUserId="16827" LastEditDate="2019-10-18T04:46:43.250" LastActivityDate="2019-10-18T04:52:02.883" Title="How do I get a vulnerability patch for sudo?" Tags="|release-juno|security|sudo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20982" PostTypeId="2" ParentId="20981" CreationDate="2019-10-17T21:45:08.853" Score="2" Body="&lt;p&gt;elementary OS Juno is based on Ubuntu 18.04 LTS. Any system update to core Ubuntu will have affect on elementary OS too. It means when Ubuntu 18.04 has been patched with latest sudo, it will be on elementary OS too. You need update your system then to get the new patch.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From your shared link, It's telling:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The problem can be corrected by updating your system to the following package versions:&#xA;Ubuntu 18.04 LTS&#xA;    sudo - 1.8.21p2-3ubuntu1.1&#xA;    sudo-ldap - 1.8.21p2-3ubuntu1.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And my eOS sudo is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg-query --showformat='${Package}\t${Version}\n' --show sudo &#xA;sudo    1.8.21p2-3ubuntu1.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It's already updated with patched version. Probably you are safe too.&lt;/p&gt;&#xA;" OwnerUserId="18424" LastEditorUserId="16827" LastEditDate="2019-10-18T04:52:02.883" LastActivityDate="2019-10-18T04:52:02.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20983" PostTypeId="1" CreationDate="2019-10-18T00:27:45.230" Score="0" ViewCount="23" Body="&lt;p&gt;I'm in the final stretch of completing a migration from lubuntu to elementary OS. One of my stumbling blocks was the transfer of Kontact. When I start Kontact, it takes 50 seconds before anything shows up on the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's like it's waiting for something else to start first, but I have no idea what.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to fix this? I'm posting this both here and on the kde forum because I can't really tell if this is an issue with Kontact or elementary OS&lt;/p&gt;&#xA;" OwnerUserId="19226" LastEditorUserId="16827" LastEditDate="2019-10-18T04:42:34.713" LastActivityDate="2024-02-28T22:07:15.927" Title="kontact takes nearly a minute to start" Tags="|release-juno|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20984" PostTypeId="1" CreationDate="2019-10-18T11:45:19.820" Score="1" ViewCount="503" Body="&lt;p&gt;I need 2 input languages on my &lt;code&gt;elementary OS 5.0 Juno&lt;/code&gt;: English and Russian and I want to have different input methods in different windows. I was trying to use &lt;code&gt;ibus&lt;/code&gt;, but it caused lags, so I have decided to switch to &lt;code&gt;fcitx&lt;/code&gt;. And I still unsuccessful with trying to configure it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pressing &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; does trigger the popup which shows that my language is Russian. Status panel shows me Russian too (for some reason I don't have tray icon, but it's fine for the moment).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actions which was done by me in order:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download &lt;code&gt;fcitx&lt;/code&gt; using &lt;code&gt;apt install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Put following lines in my &lt;code&gt;/etc/profile.d/input-method-config.sh&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export XMODIFIERS=&quot;@im=fcitx&quot;&#xA;export GTK_IM_MODULE=&quot;fcitx&quot;&#xA;export QT_IM_MODULE=&quot;fcitx&quot;&#xA;export QT4_IM_MODULE=&quot;fcitx&quot;&#xA;export CLUTTER_IM_MODULE=&quot;fcitx&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change input method in &lt;code&gt;im-config&lt;/code&gt; to &lt;code&gt;fcitx&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete &lt;code&gt;ibus&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;fcitx-diagnose&lt;/code&gt; shows me several issues, which does not seem crucial for me, but I don't know how to fix them anyway:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Config GUI for gtk2:&#xA;&#xA;    **Config GUI for gtk2 not found.**&#xA;Config GUI for kde:&#xA;&#xA;    **`kcmshell4` not found.**&#xA;gtk 2:&#xA;&#xA;    **Cannot find `gtk-query-immodules` for gtk 2**&#xA;&#xA;    **Cannot find fcitx im module for gtk 2.**&#xA;&#xA;gtk 3:&#xA;&#xA;    **Cannot find `gtk-query-immodules` for gtk 3**&#xA;&#xA;    **Cannot find fcitx im module for gtk 3.**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19228" LastActivityDate="2019-10-18T11:45:19.820" Title="fcitx shows input method change popup, but does not change keyboard layout" Tags="|release-juno|keyboard|keyboard-layout|fcitx|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20986" PostTypeId="1" CreationDate="2019-10-19T08:00:40.713" Score="0" ViewCount="187" Body="&lt;p&gt;I have a mid 2010 Macbook with the Nvidia GeForce 320m. Getting elementary to boot, and subsequently work well with this graphics card has required several adjustments, but I've gotten to a pretty stable place where I can run the Nvidia 340 graphics driver for simple gaming/graphics and resolution of overheating issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My issue though, is that suspending and subsequently resuming doesn't seem to work. I did not have this issue with the open-source drivers. After suspending, when I try to use the computer again, the screen is completely black and doesn't even have a backlight. I've noticed that Ubuntu has no trouble resuming however, so I installed GDM3 and found that I can resume okay using GDM3 as my display manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: is there something I can do to make resuming function okay with LightDM? I imagine this is an Xorg config issue, but I'm not sure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="19090" LastEditorUserId="16827" LastEditDate="2019-10-22T02:45:46.303" LastActivityDate="2020-08-19T07:43:04.003" Title="Suspend/Resume Issue" Tags="|release-juno|greeter|graphic-drivers|suspend|xorg|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="20987" PostTypeId="1" CreationDate="2019-10-19T16:29:12.377" Score="1" ViewCount="109" Body="&lt;p&gt;I'm using elementary OS 5.0 Juno. When I use right click of mouse to popup some menus, there will leave some strange window borders.I can reproduce this by using terminal and &lt;code&gt;smplayer&lt;/code&gt;.&#xA;How to reproduce(with terminal):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;io.elementary.terminal&lt;/code&gt; anywhere or any method.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Right click mouse popup menu, click 'copy' operation that will close right menu.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;There will be a window frame border, seems window not refreshed outside the activated window.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;How to reproduce:(with smplayer)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;code&gt;smplayer&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;left click mouse on the menu and do not select any operations, move mouse to next menu or prev menu, this action will close prev popup menu&lt;/li&gt;&#xA;&lt;li&gt;There will be strange window borders&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;What's wrong with this？&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7McPg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7McPg.jpg&quot; alt=&quot;strange border with terminal&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/wAEoD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wAEoD.jpg&quot; alt=&quot;strange border&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19234" LastEditorUserId="16827" LastEditDate="2019-10-22T02:47:15.123" LastActivityDate="2019-10-22T02:47:15.123" Title="Strange windows border" Tags="|release-juno|display|" AnswerCount="0" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="20988" PostTypeId="2" ParentId="15806" CreationDate="2019-10-19T18:17:04.880" Score="1" Body="&lt;p&gt;I had the same issue but i solved it, like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) I checked &lt;code&gt;lspci -nnk | grep -iA2 net; lsusb; dmesg | egrep -i 'blue|firm'&lt;/code&gt;&#xA;it gave me the result &lt;code&gt;Bluetooth: hci0: BCM: Patch brcm/BCM.hcd not found&lt;/code&gt; i'ts commonly on combined wifi+bluetooth devices (especially Broadcom) &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12163/problem-with-finding-bluetooth-device?rq=1&quot;&gt;thanks for this post&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Then i found *.hcd file from &lt;a href=&quot;https://github.com/winterheart/broadcom-bt-firmware/blob/master/brcm/BCM43142A0-0a5c-216d.hcd&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and download it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Then I copy downloaded *.hcd file to /lib/firmware/brcm&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's it, Don't forget to reboot after all!&lt;/p&gt;&#xA;" OwnerUserId="19235" LastActivityDate="2019-10-19T18:17:04.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20989" PostTypeId="2" ParentId="20951" CreationDate="2019-10-19T19:55:46.157" Score="1" Body="&lt;p&gt;Well I've tried a lot of solutions that I found out there in another stack-overflow forums, but sadly it didn't work, but at the end I found a lead that takes me for one solution that work with my system. First I will share the things I've tried and don't work and finally I'll tell what indeed fixed my problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What didn't work:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I found that my notebook weren't really suspending because the &quot;Caps Lock&quot; key still powering on if i pressed in the keyboard, and the power light never started to blink as my notebook usually does when is suspended, that symptom make's me thought that my problem was related whit this issue: &lt;a href=&quot;https://askubuntu.com/q/1029474/537536&quot;&gt;https://askubuntu.com/q/1029474/537536&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Then i tried the diagnose and solution proposed by monty47 but it didn't take any effect in my system. &#xA;Editing the grub line: &#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;with&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash mem_sleep_default=deep&quot;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;I read the following answer &lt;a href=&quot;https://unix.stackexchange.com/a/500111&quot;&gt;https://unix.stackexchange.com/a/500111&lt;/a&gt; and i try it editing grub (again) with the options suggested adding nouveau.modeset=0 to the line that says GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;But it didn't make any difference neither.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The lead:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;I start to notice a trend in many answers not accepted in the questions i was reading, compatibility issues with video drivers, many of them suggested video drivers update and kernel updates, so i firstly try to update my current open source drivers. I followed the instructions for install the latest open source amd drivers in the next guide:&#xA;&lt;a href=&quot;https://linuxconfig.org/how-to-install-the-latest-amd-radeon-drivers-on-ubuntu-18-04-bionic-beaver-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxconfig.org/how-to-install-the-latest-amd-radeon-drivers-on-ubuntu-18-04-bionic-beaver-linux&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The installation was successful, but the problem was still there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The real solution for my problem:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Then i decided update my system kernel. &#xA;In the following reddit post many people was talking about the kernels that best suit their builds whit AMD ryzen 7 2700u vega 10 (oh! the same build i have)&#xA;&lt;a href=&quot;https://www.reddit.com/r/Amd/comments/ahwu76/are_rysen_7_2700u_and_vega_10_well_supported_at/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/Amd/comments/ahwu76/are_rysen_7_2700u_and_vega_10_well_supported_at/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Summary almost all answers were suggesting to use kernels 4.19 and 4.20, since 4.19 is a LTS release I though it was a good idea start trying it and then moving forward to 4.20, but it wasn't really necessary, when i installed the new kernel the suspending issues stopped, it was my solution.  What i did in order to update my kernel:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I made a backup of my system in case anything goes wrong, i strongly recommend backup your system even more if you are going to do something dangerous like update the kernel. I used Timeshift a wonderful and easy to use tool, the instructions for backing up and restoring are in this page: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://itsfoss.com/backup-restore-linux-timeshift/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/backup-restore-linux-timeshift/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I installed ukuu and select the latest release of kernel 4.19 (at this moment 4.19.79-041979-generic) the instructions to do this can be found here:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://linuxhint.com/upgrade-kernel-ubuntu-1804/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxhint.com/upgrade-kernel-ubuntu-1804/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Well that was my experience whit this issue, i recommend check if your problem is a problem of configuration or a compatibility problem and always make a back up of everything before applying any solution that may prevent you from starting your system&lt;/p&gt;&#xA;" OwnerUserId="8681" LastEditorUserId="8681" LastEditDate="2019-10-19T20:01:44.300" LastActivityDate="2019-10-19T20:01:44.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20990" PostTypeId="1" CreationDate="2019-10-19T20:07:34.683" Score="0" ViewCount="119" Body="&lt;p&gt;I'm running Gnome Boxes, trying out different distros (including elementary OS).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can run the elementary OS liveUSB environment just fine, but when I try to install Elementary on my 25GB virtual disk, it always hangs (even the busy cursor stops animating).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Currently running under Ubuntu-Budgie)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm willing to try it under qemu instead, if someone has some documentation on which settings to use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Jtk0R.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Jtk0R.jpg&quot; alt=&quot;Hangs on &amp;quot;Configuring hardware...&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19237" LastEditorUserId="16827" LastEditDate="2019-10-22T02:43:53.873" LastActivityDate="2019-10-22T02:43:53.873" Title="Unable to install elementary OS on a Gnome Box vm" Tags="|release-juno|system-installation|virtualization|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20991" PostTypeId="2" ParentId="20990" CreationDate="2019-10-20T00:10:32.260" Score="1" Body="&lt;p&gt;Seems to have installed ok, even though it froze up. :)&lt;/p&gt;&#xA;" OwnerUserId="19238" LastActivityDate="2019-10-20T00:10:32.260" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20996" PostTypeId="1" CreationDate="2019-10-20T23:19:10.683" Score="0" ViewCount="417" Body="&lt;p&gt;I have a Lenovo y50-70 with a GTX 860M Nvidia card.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using a fresh install of Elementary OS 5.0 and upgraded to the Nvidia 430 using the Additional Drivers GUI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have also installed libvulkan1 and vulkan-utils&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I try to check Vulkan via &lt;code&gt;$ vulkaninfo | less&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the following output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Xlib:  extension &quot;NV-GLX&quot; missing on display &quot;:0&quot;.&#xA;/build/vulkan-tools-Igvqg5/vulkan-tools-1.1.114.0+dfsg1/vulkaninfo/vulkaninfo.c:5884: failed with VK_ERROR_INITIALIZATION_FAILED&#xA;==========&#xA;VULKANINFO&#xA;==========&#xA;&#xA;Vulkan Instance Version: 1.1.114&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am very new to linux, so obviously I am missing something. How do I get Vulkan working in this setup?&lt;/p&gt;&#xA;" OwnerUserId="19243" LastActivityDate="2019-10-21T22:07:55.727" Title="Unable to Initialize Vulkan on Juno" Tags="|release-juno|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="20997" PostTypeId="1" CreationDate="2019-10-21T03:40:54.957" Score="0" ViewCount="4651" Body="&lt;p&gt;I decided to try to install the proprietary nVidia drivers. It should have been the '390 drivers but I installed '340 instead (forgot which graphics card I had). Now, when I reboot, the login screen is something like 800x600 and when I try to log in, I momentarily get a desktop (long enough to see the bluetooth/volume/power/etc/ icons at the top left, but they also seem to be at a low resolution) and then I get dumped back into the login prompt. I can access a terminal via CTL-ALT-F2. So how do I go about reverting back to the nouveau drivers using just the command line?&lt;/p&gt;&#xA;" OwnerUserId="19226" LastActivityDate="2024-02-29T01:02:30.243" Title="How to roll back a video driver from the command line?" Tags="|display|greeter|graphic-drivers|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="20999" PostTypeId="1" CreationDate="2019-10-21T17:15:57.403" Score="2" ViewCount="120" Body="&lt;p&gt;I tried to install elementary OS today on my tower but I ran into a problem. I installed a previous version of Juno without problems, but now I can't get the Installer to boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded the Installer and checked the checksum, it was correct. Then I flashed the USB with etcher and tried to boot it. During the reboot I selected the USB and tried all three option (try, install and OEM install) but I got the same result every time: The screens show a weird pattern and then goes blank. Then the fans of the graphic cars spins up to max for a moment before they slow down again and I'm stuck with a black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running the following hardware:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;AMD fx8350&lt;/li&gt;&#xA;&lt;li&gt;Asus Sabertooth 990fx&lt;/li&gt;&#xA;&lt;li&gt;AMD RX 590&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thank you very much in advance for your answer&lt;/p&gt;&#xA;" OwnerUserId="19247" LastEditorUserId="16827" LastEditDate="2019-10-22T02:39:25.990" LastActivityDate="2019-10-23T16:14:22.483" Title="USB-Installer doesn't boot" Tags="|release-juno|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21000" PostTypeId="1" CreationDate="2019-10-21T17:34:32.700" Score="1" ViewCount="38" Body="&lt;p&gt;I just updated the operational system with the updates released, 1h ago i think, and then when i restarted the laptop, and did the login i had to wait more the 1 minute (maybe 2 minutes) to access my screen, it was just a black screen. It took to much time to start.&#xA;Such thing happened to anyone else.&lt;/p&gt;&#xA;" OwnerUserId="19248" LastEditorUserId="16827" LastEditDate="2019-10-22T02:40:01.760" LastActivityDate="2019-10-22T02:40:01.760" Title="elementary OS is taking too much time to start" Tags="|release-juno|updates|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21001" PostTypeId="2" ParentId="20996" CreationDate="2019-10-21T22:07:55.727" Score="1" Body="&lt;p&gt;Disabling Secure Boot in the BIOS solved my problem&lt;/p&gt;&#xA;" OwnerUserId="19243" LastActivityDate="2019-10-21T22:07:55.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21002" PostTypeId="1" CreationDate="2019-10-22T03:02:45.223" Score="0" ViewCount="65" Body="&lt;p&gt;When copying 10 files from a folder to another, which already has those 10 files, 3 options are given, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;a) keep latest&#xA;b) replace with the one you are dragging&#xA;c) renaming to keep both&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to have auto rename in option c of all files to keep both copies, just like in Windows 10? Manual renaming to avoid conflict is alright for 1 or 2 files, but if you are copying 10-15 files then auto renaming will be more productive.&lt;/p&gt;&#xA;" OwnerUserId="19136" LastEditorUserId="16827" LastEditDate="2019-10-22T03:34:01.293" LastActivityDate="2024-02-29T16:01:05.110" Title="Keeping both files with auto rename when copying" Tags="|release-juno|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21003" PostTypeId="2" ParentId="20999" CreationDate="2019-10-22T06:19:42.700" Score="1" Body="&lt;p&gt;Same here, but I tried on the same hardware system like before the same elementary OS image on a USB stick. I think it is the same, because I tried to download the new one, but the  torrent client verified that it is the same like an year ago. What I found is that if I try to boot with the same USB stick another computer, everything is ok. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way to start the current one was by using &lt;strong&gt;nomodeset&lt;/strong&gt; parameter before I choose the 'try' option. To achieve this select 'Try elementary OS' and press the 'e' key on the keyboard, then add nomodeset after &lt;code&gt;quiet splash&lt;/code&gt; so it became &lt;code&gt;quiet splash nomodeset ---&lt;/code&gt; and press Ctrl+x to boot the system with this parameter. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="16827" LastEditDate="2019-10-23T16:14:22.483" LastActivityDate="2019-10-23T16:14:22.483" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="21004" PostTypeId="2" ParentId="20997" CreationDate="2019-10-22T06:33:44.230" Score="0" Body="&lt;p&gt;An option to revert back is to use AppCenter &gt; Installed, wait until the nvidia drivers become visible on the top, click on the icon of the one that is installed and then uninstall. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using command prompt only, &lt;code&gt;sudo apt purge nvidia-*&lt;/code&gt; or &lt;code&gt;sudo apt remove nvidia-*&lt;/code&gt; . For the first command line option to work probably you have to install purge. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-10-22T07:33:48.030" LastActivityDate="2019-10-22T07:33:48.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21005" PostTypeId="1" CreationDate="2019-10-22T12:52:52.597" Score="1" ViewCount="618" Body="&lt;p&gt;not able to add google calendar in elementary calendar&#xA;Sign-in attempt was blocked&#xA;    xxxxxxxxxxx@thehiring.agency&#xA;Someone just used your password to try to sign in to your account from a non-Google app. Google blocked them, but you should check what happened. Review your account activity to make sure that no one else has access.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yJ3Hx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yJ3Hx.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19252" LastActivityDate="2019-11-17T13:19:25.473" Title="not able to add google calendar in elementary calendar" Tags="|calendar|" AnswerCount="3" CommentCount="0" ClosedDate="2019-11-17T13:20:12.830" ContentLicense="CC BY-SA 4.0" />
  <row Id="21006" PostTypeId="2" ParentId="20983" CreationDate="2019-10-22T16:57:48.580" Score="0" Body="&lt;p&gt;For anyone else who ever has this problem, the solution I stumbled upon was to use:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;akonadictl fsck&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19226" LastActivityDate="2019-10-22T16:57:48.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21007" PostTypeId="2" ParentId="20997" CreationDate="2019-10-22T17:12:21.413" Score="0" Body="&lt;p&gt;Thanks, Bo,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Was the first step in what worked for me. That installed the right set of drivers and at least got me to a desktop, but it turns out that I could only get 640x480 resolution. After this, the nVidia Settings window comes up completely blank (except for Apply and Cancel buttons) and the native System Settings-&gt;Displays icon would close System Settings whenever I clicked on it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;showed that the system believed 640x480 was the only option available and hence, any attempt to use another was rejected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the end, I took a chance on using a previous version of the kernal from the GRUB menu and updated the drivers and resolution from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works now. I should have thought of that sooner :-)&lt;/p&gt;&#xA;" OwnerUserId="19226" LastActivityDate="2019-10-22T17:12:21.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21008" PostTypeId="1" CreationDate="2019-10-22T20:02:38.217" Score="1" ViewCount="69" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0oYiG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0oYiG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;When I try to maximize a window on any screen other than my primary, while the screen arrangement is anything other than Left&amp;lt;&gt;Right edge aligned, windows only maximize to half screen.&#xA;see screen shot.&#xA;In this example I have my monitors arranged in a triangle.  When I arrange them in a straight line maximize works fine.  The behavior is the same whether I max by double-clicking title bar, dragging to top of screen, or clicking arrows on the top right of the window.&lt;/p&gt;&#xA;" OwnerUserId="19253" LastEditorUserId="19253" LastEditDate="2019-10-22T20:16:23.520" LastActivityDate="2019-10-22T20:16:23.520" Title="Maximize with multiple displays" Tags="|release-juno|display|greeter|window-manager|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21009" PostTypeId="1" CreationDate="2019-10-23T06:24:39.347" Score="0" ViewCount="829" Body="&lt;p&gt;I created a Bootable usb for elementary os using etcher however when I try to boot from it on my Lenovo thinkpad x1 carbon (gen 7) it gets stuck at a black screen after selecting try elementary OS without installing from the grub. I tried the same usb stick on another laptop and it was able to bootup properly. I have turned off secure boot on my lenovo x1 carbon. Also, I have previously installed Ubuntu and manjaro on the same machine successfully. I don't know why elementary OS is running into issues. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: Tried with 'nomodeset', tried different software like Rufus, UnetBootin and Etcher to create bootable.&lt;/p&gt;&#xA;" OwnerUserId="19256" LastEditorUserId="16827" LastEditDate="2019-12-17T16:23:03.970" LastActivityDate="2023-12-27T02:09:26.057" Title="elementary OS bootable USB not booting up" Tags="|boot|usb|thinkpad|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21010" PostTypeId="2" ParentId="21002" CreationDate="2019-10-23T09:26:00.970" Score="0" Body="&lt;p&gt;You need to raise an issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; (after checking for duplicates).  You should specify what form you want the auto-renaming to take, e.g. adding &quot;-(copy)&quot; to the filename, rather than referencing another OS.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-10-23T09:26:00.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21012" PostTypeId="2" ParentId="21009" CreationDate="2019-10-23T16:14:57.073" Score="0" Body="&lt;p&gt;Can you try to boot using a parameter &lt;strong&gt;nomodeset&lt;/strong&gt;. Select 'Try elementary os without installing' and press 'e' on you keyboard. Then edit the line containing &lt;code&gt;quiet splash&lt;/code&gt; so it became &lt;code&gt;quiet splash nomodeset ---&lt;/code&gt; and then Ctrl+x to boot with this parameter.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is a similar question here, so this one is a duplicate. You should avoid that.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-10-23T16:14:57.073" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21014" PostTypeId="2" ParentId="20894" CreationDate="2019-10-23T16:16:47.447" Score="1" Body="&lt;p&gt;Actually I found out how to do it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The file is in &lt;code&gt;~/.config/marlin/marlin.db&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user19148" LastEditorDisplayName="user19148" LastEditDate="2019-10-23T18:39:30.020" LastActivityDate="2019-10-23T18:39:30.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21016" PostTypeId="1" CreationDate="2019-10-23T20:16:35.603" Score="0" ViewCount="65" Body="&lt;p&gt;Have to update Adobe Flash in order to play games on line.Tried to download it from website but get a box that asks me to choose an app to open it with,but I have no idea which one I should use. I know you can also use terminal,but I have never used it and don't know the proper commands. Could someone please point me in the right direction so I can get it working again.&lt;/p&gt;&#xA;" OwnerUserId="13061" LastActivityDate="2024-03-02T15:06:45.813" Title="Adobe Flash upgrade" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21017" PostTypeId="1" CreationDate="2019-10-23T21:12:08.500" Score="0" ViewCount="160" Body="&lt;p&gt;18.04.2 LTS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am switching from Mac OS X and iOS to Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am replacing both my desktop computer and my iPad with a Dell Inspiron 11 3000 series 2-in-1 special edition (3153).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The 3153 has a Super Key on the bezel.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When in Tablet mode, I'd like to be able to simply press the bezel Super key to unhide the On-Screen Keyboard, and when finished with the On-Screen Keyboard, press the Super key again on the 3153's bezel to hide it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've attempted to achieve the desired behavior in System Settings&gt;Keyboard&gt;Shortcuts&gt;Windows by disabling the &quot;toggle on Keyboard Shortcuts&quot; by the Super key, disabling &quot;Toggle On Screen keyboard&quot; in System Settings&gt;Keyboard&gt;Shortcuts&gt;Universal Access, and attempted to enable &quot;Toggle On Screen keyboard&quot; via the Super key in System Settings&gt;Keyboard&gt;Shortcuts&gt;Universal Access, to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched this board, and have found no posting with a solution to to accomplish this.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for assistance.&lt;/p&gt;&#xA;" OwnerUserId="19259" LastActivityDate="2019-10-23T21:12:08.500" Title="Elementary OS Juno - Setting the Super Key to unhide/hide/Toggle On-Screen Keyboard" Tags="|keyboard-shortcuts|touchscreen|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21021" PostTypeId="2" ParentId="12393" CreationDate="2019-10-24T19:02:17.093" Score="1" Body="&lt;p&gt;Create a new file &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt; and put the following in it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;allow-guest=false&#xA;greeter-show-manual-login=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, press &lt;code&gt;CTRL+ALT+F1&lt;/code&gt; to open the command line and execute &lt;code&gt;service lightdm restart&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, you should have the option 'Manual login'  at the bottom of the login screen.&lt;/p&gt;&#xA;" OwnerUserId="19264" LastActivityDate="2019-10-24T19:02:17.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21023" PostTypeId="2" ParentId="21016" CreationDate="2019-10-25T07:25:02.697" Score="0" Body="&lt;p&gt;&lt;strong&gt;Option 1:&lt;/strong&gt; via Adobe website&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go here: &lt;a href=&quot;https://get.adobe.com/flashplayer/otherversions/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://get.adobe.com/flashplayer/otherversions/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;In the drop-down lists, select &lt;code&gt;Linux 64 bit&lt;/code&gt; and &lt;code&gt;FP 32 for Ubuntu (apt)&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Next&lt;/code&gt; and follow on-screen instructions.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Option 2:&lt;/strong&gt; via Terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launch Terminal and execute the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository &quot;deb http://archive.canonical.com/ $(lsb_release -sc) partner&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install adobe-flashplugin browser-plugin-freshplayer-pepperflash&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then restart your browser and go to &lt;a href=&quot;http://isflashinstalled.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://isflashinstalled.com&lt;/a&gt; to check if Flash plugin is working.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-25T07:25:02.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21027" PostTypeId="1" AcceptedAnswerId="21042" CreationDate="2019-10-25T19:26:53.750" Score="1" ViewCount="52" Body="&lt;p&gt;In the recent versions of Elementary os when you delete a file it shows you a message with the default option being &lt;code&gt;Cancel&lt;/code&gt;, in past versions the default option was &lt;code&gt;Delete&lt;/code&gt;. There is any way to change this behavior? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NQ2OK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NQ2OK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16439" LastActivityDate="2019-10-27T16:36:04.340" Title="Change default option deleting files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21028" PostTypeId="1" CreationDate="2019-10-26T09:26:01.220" Score="1" ViewCount="80" Body="&lt;p&gt;I deleted the calendar by mistake. But I can't reinstall it from the App Center. The package id's '' are not valid' was introduced when an error occurred during installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HwYVo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HwYVo.png&quot; alt=&quot;Screenshot showing the error dialogue in App Center&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19280" LastEditorUserId="68" LastEditDate="2019-11-05T12:57:52.477" LastActivityDate="2024-03-13T22:07:50.990" Title="Can't reinstall Calendar from App Center" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21029" PostTypeId="1" CreationDate="2019-10-26T12:13:02.020" Score="0" ViewCount="328" Body="&lt;p&gt;I recently installed elementary os alongside with windows 10. After installing it with usb, it boots and lock screen pops up but after i enter my password pantheon doesnt start and it freezes with only showing wallpaper.&#xA;what should i do?&#xA;edit: some back info&#xA;i upgraded my ssd it was m.2 sata now it is nvme. i installed windows 10 first then elementary. it automatically boots into elementary os right now. my laptop has 2 graphic cards intel and nvidia. i tried apt-get purge nvidia but it doesn’t have nvidia drivers. i tried deleting then downloading pantheon but i couldn’t download after deleting it.i reinstalled eOS after doing this. also i turn ahci mode on on bios.&lt;/p&gt;&#xA;" OwnerUserId="19281" LastEditorUserId="19281" LastEditDate="2019-10-26T13:39:39.997" LastActivityDate="2024-03-10T04:03:40.407" Title="eOS freezes after installation" Tags="|release-juno|boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21030" PostTypeId="1" CreationDate="2019-10-26T12:45:21.307" Score="0" ViewCount="565" Body="&lt;p&gt;I own a Lenovo Ideapad S10-2 which runs slow on Windows XP. Tried to install Linux  some three years ago, but there were issues with the WiFi driver. Would you recommend installing Elementary OS on this platform? RAM has been upgraded to the max.&#xA;BR&#xA;Patrick  &lt;/p&gt;&#xA;" OwnerUserId="19282" LastActivityDate="2020-04-02T15:13:47.447" Title="Elementary OS on Lenovo Ideapad S10-2" Tags="|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21032" PostTypeId="2" ParentId="21029" CreationDate="2019-10-26T14:08:11.257" Score="0" Body="&lt;p&gt;Switch to a text console by pressing ctrl+alt+F1 then login and do full upgrades with apt update, apt upgrade and apt dist-upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then reboot and see if that helps. &lt;/p&gt;&#xA;" OwnerUserId="17835" LastEditorUserId="12483" LastEditDate="2019-11-01T12:34:55.750" LastActivityDate="2019-11-01T12:34:55.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21033" PostTypeId="2" ParentId="21005" CreationDate="2019-10-26T20:44:18.197" Score="0" Body="&lt;p&gt;There is an option into your google account to enable access for non secure apps, or something like that. Usually by default it is set to disable access and this is the reason the Calendar app cannot connect. You have to change it in order to get access&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-11-14T06:14:54.483" LastActivityDate="2019-11-14T06:14:54.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21034" PostTypeId="2" ParentId="20873" CreationDate="2019-10-27T00:14:33.590" Score="0" Body="&lt;p&gt;In have the same problem.  I always had issues with nvidia drivers like this so I never install them, but this time I needed to install CUDA for development and tried to install on the side, installation was not succesful, I uninstalled all nvidia marked software, but I still have the display &quot;unknown&quot;  and my resolution is off (large fonts etc)  The old laptop is HP and I have a HP external screen connected to it, no idea how to correct it.&lt;/p&gt;&#xA;" OwnerUserId="10153" LastActivityDate="2019-10-27T00:14:33.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21036" PostTypeId="1" CreationDate="2019-10-27T07:18:49.633" Score="1" ViewCount="120" Body="&lt;p&gt;Good day everyone!&#xA;I've come back to Linux distros and now I've started using Elementary for my main operating system. &#xA;So, I have one question (deep looking into the &quot;Photos&quot; app isn't getting answers for me) about importing. &#xA;I'm using for my photo-hobby Nikon's cameras with RAW (NEF) files and when I import them into my laptop, the application automating convert my photos to JPEG (like and for all my collection, when I've moved to a new system, this app convert ALL my RAWs to JPEG). How I can import only RAW from my flash-card without converting? And how turnoff automatic import?  &lt;/p&gt;&#xA;" OwnerUserId="19287" LastActivityDate="2019-10-29T07:38:18.360" Title="Photo's import function" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21037" PostTypeId="2" ParentId="16757" CreationDate="2019-10-27T11:17:06.263" Score="0" Body="&lt;p&gt;Native Camera app on Juno go updated some time ago, now all is working as it should.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2019-10-27T11:17:06.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21038" PostTypeId="2" ParentId="19620" CreationDate="2019-10-27T11:20:13.300" Score="2" Body="&lt;p&gt;Problem is caused by Dell BIOS 1.11.2, rolling back to 1.10 solved it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully the next BIOS version will be fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: BIOS 1.12.0 has been fine, but the latest 1.13.1 (published January 6th 2020) has recreated the problem. Again, rolling back to 1.12.0 is the solution, but I would like to understand how the official BIOS can do this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried this solution, but no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dell.com/community/XPS/Dell-XPS-15-9550-is-absolute-unusable-after-BIOS-update/m-p/7376573&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dell.com/community/XPS/Dell-XPS-15-9550-is-absolute-unusable-after-BIOS-update/m-p/7376573&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else?&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="16104" LastEditDate="2020-01-14T20:14:02.533" LastActivityDate="2020-01-14T20:14:02.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21041" PostTypeId="1" CreationDate="2019-10-27T13:09:09.393" Score="0" ViewCount="116" Body="&lt;p&gt;I have deleted elementaryOS from Windows Disk Management and now I can’t boot into Windows anymore and Linux is gone. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Getting grub error when booting..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I’ve still got a live elementary USB I can boot to, can I create a partition/resize my windows disk from here, then reinstall elementary and remove in the correct manner? Or can I just remove the grub boot loader from here? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would like to keep the existing Windows data ideally..&lt;/p&gt;&#xA;" OwnerUserId="19290" LastActivityDate="2024-03-05T22:05:35.613" Title="Deleted elementaryOS and can’t boot Windows" Tags="|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21042" PostTypeId="2" ParentId="21027" CreationDate="2019-10-27T16:36:04.340" Score="1" Body="&lt;p&gt;This can only changed in the source code I am afraid.  I assume the default action as changed in order to comply with the elementary HIG which states:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;. Destructive actions should not be focused by default to prevent accidental activation.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-10-27T16:36:04.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21043" PostTypeId="1" CreationDate="2019-10-28T07:26:57.857" Score="0" ViewCount="378" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kKNAX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kKNAX.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;my laptops hotspot is on,but doesn't show laptops name in my mobile wifi settings.Any one knows??what the problem is?. &lt;/p&gt;&#xA;" OwnerUserId="19298" LastEditorUserId="19298" LastEditDate="2019-10-29T20:08:32.163" LastActivityDate="2024-03-08T15:06:40.810" Title="hotspot problem" Tags="|wifi|networking|drivers|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21044" PostTypeId="1" CreationDate="2019-10-28T07:48:34.747" Score="0" ViewCount="129" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IkRM9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IkRM9.png&quot; alt=&quot;when i open appcenter a popup message is appeared as shown in the pic.Anyone knows what the poroblem is?&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;when i open appcenter a popup message is appeared as shown in the pic.Anyone knows what the poroblem is?]&lt;/p&gt;&#xA;" OwnerUserId="19298" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-10-30T06:11:19.737" Title="failed to fetch update caused by wine" Tags="|appcenter|wine|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21045" PostTypeId="2" ParentId="21044" CreationDate="2019-10-28T12:54:28.257" Score="1" Body="&lt;p&gt;Your WINE repository is very old and deprecated (see &lt;a href=&quot;https://launchpad.net/~ubuntu-wine/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;) and does not have proper update packages for your OS. To fix this issue, first remove this PPA from your system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:ubuntu-wine/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and then add the newer WINE PPA:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;wget https://dl.winehq.org/wine-builds/Release.key&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-key add Release.key&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-add-repository 'https://dl.winehq.org/wine-builds/ubuntu/'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-28T12:54:28.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21046" PostTypeId="2" ParentId="21041" CreationDate="2019-10-28T13:17:26.420" Score="0" Body="&lt;p&gt;Depending on your disk setup (MBR/UEFI), you may want to try one of &lt;a href=&quot;https://superuser.com/questions/949219/how-to-fix-the-windows-10-boot-loader-from-windows&quot;&gt;these&lt;/a&gt; solutions. (Read the answers to choose the best strategy.)&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-28T13:17:26.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21047" PostTypeId="1" CreationDate="2019-10-28T13:41:16.107" Score="2" ViewCount="80" Body="&lt;p&gt;Slingshot category is already defined if new application installed &lt;strong&gt;(Accessories, Graphics, Internet, etc)&lt;/strong&gt;. I want to create new category, for example &lt;strong&gt;Personal&lt;/strong&gt; categories that contains custom apps inside. It's possible to create new category in Slingshot? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="19304" LastActivityDate="2019-12-04T20:34:49.037" Title="Create New Slingshot Category" Tags="|release-juno|slingshot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21048" PostTypeId="1" AcceptedAnswerId="21054" CreationDate="2019-10-28T18:36:42.627" Score="2" ViewCount="570" Body="&lt;p&gt;I can not find any settings regarding changing the background image in the new greeter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently it shows a grey background with a user card in the middle.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to set a preferred background image instead of the default grey colored background ?&lt;/p&gt;&#xA;" OwnerUserId="19306" LastActivityDate="2019-11-28T17:02:30.320" Title="How to change the greeter background in elementary OS juno" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21050" PostTypeId="1" CreationDate="2019-10-29T02:53:02.320" Score="1" ViewCount="112" Body="&lt;p&gt;Is there a guide for getting this working offline? Every guide I've found has come up short for me, and I have no way to connect to ethernet. Bluetooth tethering doesn't work either. I can connect to my p&lt;/p&gt;&#xA;" OwnerUserId="19312" LastActivityDate="2019-10-29T02:53:02.320" Title="2015 Macbook Air Can't connect to WiFi (BCM4360)" Tags="|wifi|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21052" PostTypeId="2" ParentId="21036" CreationDate="2019-10-29T07:38:18.360" Score="1" Body="&lt;p&gt;Strangely enough, on my PC Photos doesn't auto-import anything when I connect my camera. At the same time I couldn't find a preference inside the app which could be responsible for that behavior, let alone 'Do not convert my RAWs into JPGs please' option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's a preference called 'Watch library for new files' though, so try turning that off and see if it fixes the auto-import issue. If it doesn't, try your luck and &lt;a href=&quot;https://github.com/elementary/photos/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;report&lt;/a&gt; that to the eOS devs.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-29T07:38:18.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21054" PostTypeId="2" ParentId="21048" CreationDate="2019-10-29T16:05:38.970" Score="0" Body="&lt;p&gt;At this stage it's not configurable and has been designed like that. I did see on Reddit quite a few remarks and suggestions regarding that same issue. Head over to teh sub-reddit here:&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2019-10-29T16:05:38.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21055" PostTypeId="1" AcceptedAnswerId="25136" CreationDate="2019-10-29T16:24:48.870" Score="0" ViewCount="44" Body="&lt;p&gt;I am hoping someone can help me with this. On my desktop I use Juno and firefox as my main browser. When I access page that will require some form of autofilled input (Like a saved username and password). The moment I click on the input box then the auto-fill information shows a hint of the input and covers the input box.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried this on firefox with a different linux OS and it does not replicate the issue at all. I have also tried different browsers but this is unique to firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea what can be done to fix it? Seems like the hint pop up just needs to avoid the input box, but some styling seems to be off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attached is a screenshot form my phone as I cannot take a screenshot with the hint in place, please excuse the quality&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LeZdp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LeZdp.jpg&quot; alt=&quot;Problem case&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="692" LastEditorUserId="692" LastEditDate="2019-11-14T10:29:32.330" LastActivityDate="2020-07-06T13:22:14.210" Title="Firefox autofil hint cover input blocks" Tags="|firefox|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21056" PostTypeId="1" CreationDate="2019-10-29T17:02:47.490" Score="0" ViewCount="106" Body="&lt;p&gt;After a few days without using my laptop and leaving it unpluged/uncharged, when I turned it on today it showed the BIOS screen and date/time was wrong. So I corrected the date/time saved and boot. Now it only boots straight in secure mode, cant connect to wifi, therefore cant update, screen resolution is wrong (thats how I know its secure mode).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help! Was working fine last time I used (4 days ago).&lt;/p&gt;&#xA;" OwnerUserId="19131" LastActivityDate="2019-10-30T21:02:37.177" Title="Elementary OS booting on secure mode only PLEASE HELP" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21059" PostTypeId="1" CreationDate="2019-10-30T00:34:06.447" Score="0" ViewCount="47" Body="&lt;p&gt;I'm trying to get elementaryOS working on Virtualbox to test it out, so i took it from the OSArchive website, but now i'm confused because i get the &quot;iso&quot; on winrar, but there is no iso file! And there's also all these files and documents, so can someone tell me, what or where is the iso file? (Note: I tried to put in the efi.img file with floppy controller but it didn't work so i'm even more confused...)&lt;/p&gt;&#xA;" OwnerUserId="19320" LastEditorUserId="9445" LastEditDate="2019-10-30T10:43:48.890" LastActivityDate="2019-10-30T10:43:48.890" Title="How do I install elementaryOS 0.4 Loki on Virtualbox?" Tags="|release-loki|virtualization|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21060" PostTypeId="2" ParentId="21044" CreationDate="2019-10-30T06:11:19.737" Score="0" Body="&lt;p&gt;when i try to execute&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hZdPc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hZdPc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; sudo apt-add-repository '&lt;a href=&quot;https://dl.winehq.org/wine-builds/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dl.winehq.org/wine-builds/ubuntu/&lt;/a&gt;'&#xA; it shows&#xA;  &quot; 404  Not Found [IP: 91.189.95.83 80]&#xA;Reading package lists... Done&lt;br&gt;&#xA;E: The repository '&lt;a href=&quot;http://ppa.launchpad.net/webupd8team/gnome3/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/webupd8team/gnome3/ubuntu&lt;/a&gt; bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository '&lt;a href=&quot;http://ppa.launchpad.net/wine/wine-builds/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/wine/wine-builds/ubuntu&lt;/a&gt; bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&quot; And hence i cannot execute apt-get update&lt;/p&gt;&#xA;" OwnerUserId="19298" LastActivityDate="2019-10-30T06:11:19.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21061" PostTypeId="2" ParentId="21059" CreationDate="2019-10-30T08:19:58.337" Score="1" Body="&lt;p&gt;The iso file you downloaded is NOT supposed to be opened with WinRar. To achieve what you want, you have to open VirtualBox, create a new Linux machine and, at the first startup, point it towards the iso file you downloaded. Take a look at the gif below for a quick tutorial (&lt;a href=&quot;https://i.stack.imgur.com/ffftf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;better quality here&lt;/a&gt;). When creating the virtual machine, I suggest allocating at least 2GB of RAM if possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing elementary OS inside your new virtual machine, you should also install VirtualBox guest additions (better mouse integration, improved video support...) &lt;a href=&quot;https://itsfoss.com/virtualbox-guest-additions-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This tutorial&lt;/a&gt; is for Ubuntu, but it will work just the same for any Debian based Linux distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.storagecraft.com/the-dead-simple-guide-to-installing-a-linux-virtual-machine-on-windows/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you can find a detailed step-by-step tutorial on setting-up a new Linux machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note, elementary OS performs a bit unsatisfactory in VirtualBox, so the experience is not really as good as running it on real hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Menrc.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Menrc.gif&quot; alt=&quot;a poor quality gif with the steps&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-10-30T08:25:22.077" LastActivityDate="2019-10-30T08:25:22.077" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21067" PostTypeId="1" CreationDate="2019-10-30T19:02:55.100" Score="0" ViewCount="1128" Body="&lt;p&gt;I need to reenable the splash logo in the &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/etc/default/grub&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;file. I needed to boot in verbose mode to fix a slow boot issue but foolishly didn't backup the grub file so now don't have the elementarry logo at boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone please post their grub file so that I can restore the logo? I tried setting quiet splash and ran &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;but there is still no boot logo.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Current grub file.&#xA;# If you change this file, run 'update-grub' afterwards to update&#xA;# /boot/grub/grub.cfg.&#xA;# For full documentation of the options in this file, see:&#xA;#   info -f grub -n 'Simple configuration'&#xA;&#xA;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLE=hidden&#xA;GRUB_TIMEOUT=5&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;GRUB_CMDLINE_LINUX=&quot;&quot;&#xA;&#xA;# Uncomment to enable BadRAM filtering, modify to suit your needs&#xA;# This works with Linux (no patch required) and with any kernel that obtains&#xA;# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)&#xA;#GRUB_BADRAM=&quot;0x01234567,0xfefefefe,0x89abcdef,0xefefefef&quot;&#xA;&#xA;# Uncomment to disable graphical terminal (grub-pc only)&#xA;#GRUB_TERMINAL=console&#xA;&#xA;# The resolution used on graphical terminal&#xA;# note that you can use only modes which your graphic card supports via VBE&#xA;# you can see them in real GRUB with the command `vbeinfo'&#xA;#GRUB_GFXMODE=640x480&#xA;&#xA;# Uncomment if you don't want GRUB to pass &quot;root=UUID=xxx&quot; parameter to Linux&#xA;#GRUB_DISABLE_LINUX_UUID=true&#xA;&#xA;# Uncomment to disable generation of recovery mode menu entries&#xA;#GRUB_DISABLE_RECOVERY=&quot;true&quot;&#xA;&#xA;# Uncomment to get a beep at grub start&#xA;#GRUB_INIT_TUNE=&quot;480 440 1&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="6983" LastEditorUserId="6983" LastEditDate="2019-10-30T19:33:24.890" LastActivityDate="2019-10-31T12:01:55.993" Title="How to restore elementary boot logo in grub file" Tags="|release-juno|boot|grub|logo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21068" PostTypeId="2" ParentId="21056" CreationDate="2019-10-30T21:02:37.177" Score="2" Body="&lt;p&gt;my guess is, if your BIOS date/time have suddenly become shifted by themselves, this might be due to the potential CMOS reset. If CMOS has been reset, this means that all your BIOS settings have been reset, including one that's usually called 'Secure Boot'. If that's the case, reboot your laptop, enter BIOS settings, find 'Secure Boot' setting, change it to Disabled, save and reboot.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-10-30T21:02:37.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21069" PostTypeId="2" ParentId="17445" CreationDate="2019-10-31T05:43:47.320" Score="4" Body="&lt;p&gt;all you have to do is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19333" LastEditorUserId="16827" LastEditDate="2019-11-01T05:18:09.640" LastActivityDate="2019-11-01T05:18:09.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21070" PostTypeId="2" ParentId="21043" CreationDate="2019-10-31T09:21:54.300" Score="0" Body="&lt;p&gt;Step 1: Go to Network Icon on top panel -&gt;network settings--&gt; Edit Connections from the bottom of the box …, then click the Add button in right bottom corner of pop-up window.&#xA;Step 2: Now a popup window appeared with a dropdown box,select wifi from the box and click create.&#xA;Step 3:In next window, do:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type in a connection name. The name will be used later.&#xA;Type in a SSID(like hotspot,internet_share etc)&#xA;Select mode: Hotspot&#xA;Band:automatic &#xA;BSSID: leave blank&#xA;Device MAC address: select your wireless card from drop-down menu.&#xA;Set MTU: Automatic &#xA;Step 4: choose wifi-security from top of popup window &#xA;     Select security from dropdown box toWPA-WPA2 personal &#xA;Step 5:Then Go to to ipv4 and ipv6 settings abd set method to &quot;shared to other computer &quot;&#xA;Thats iT&#xA;You will now see an access point name in wifi settings.just click on that then enjoy your laptops internet with other device &lt;/p&gt;&#xA;" OwnerUserId="19298" LastActivityDate="2019-10-31T09:21:54.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21072" PostTypeId="2" ParentId="21067" CreationDate="2019-10-31T09:47:46.027" Score="2" Body="&lt;p&gt;The elementary logo comes from the plymouth. Plymouth has different themes and it looks like you have changed the theme. In order to return to the elementary theme you have to type into terminal &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo update-alternatives --config default.plymouth&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and type the number of the /usr/share/plymouth/themes/elementary/elementary.plymouth theme in your list.&#xA;after this &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo update-initramfs -u&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;in order to update initramfs with the selected new theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another reason is the $DISPLAY environment variable, you can check the solution in this answer - &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12470/black-screen-at-boot-solved&quot;&gt;Black screen at boot [SOLVED]&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-10-31T12:01:55.993" LastActivityDate="2019-10-31T12:01:55.993" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="21073" PostTypeId="1" CreationDate="2019-10-31T14:49:09.997" Score="1" ViewCount="35" Body="&lt;p&gt;Whenever I switch I get problems with bluetooth. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;It's not the problem with pairing&lt;/strong&gt;, I copied my bluetooth devices keys from Windows to Elementary so I resolved problem with pairing devices every OS change.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that sometimes when I switch from eOS to Windows I have no bluetooth icon in Windows action center and bluetooth simply not work. I used to solve it with random Windows Updating and resolving problem with built-in windows troubleshooting, but now I can't resolve it that way for some reason and... even If I could resolve it at this point I am sick of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when I try to switch back to eOS afer that bug occurs in Windows 10 I can't use bluetooth either in Elemenary and the bluetooth indicator icon becomes hidden in the elementary upper panel (wingpannel).&#xA;It looks like that: &lt;a href=&quot;https://i.stack.imgur.com/FfilH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FfilH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My laptop: Lenovo Y50-70&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="19336" LastActivityDate="2019-10-31T14:49:09.997" Title="Bluetooth problem everytime I switch between ElementaryOS / Windows 10" Tags="|bluetooth|microsoft-windows|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21074" PostTypeId="2" ParentId="2443" CreationDate="2019-10-31T21:57:44.730" Score="0" Body="&lt;p&gt;I tried pretty much every solution posted here. I am running Elementary 0.4.1 Loki, and the day-before-yesterday i ran some updates trough the AppCenter, and these updates requred a reboot for some reason. After that reboot i couldn't log in. What finally solved the problem for me, after trying everything else posted here i did this - I ran the ecrypt-mount-private command and i was asked for a login passphrase. I tried entering my password but it didn't work - i must confess i'm pretty much a total noob when it comes to Linux distros - so then I got the idea of entering my old (original) passower (the one i had set whe installing Elementary). That decrypted my home directory. The I exited the CLI by pressing Ctrl+Alt+F7 and got back to the GUI, and entered my current account password and I managed to log in. Hope this helps. At the moment I am installing 5.0 Juno :) &lt;/p&gt;&#xA;" OwnerUserId="19338" LastActivityDate="2019-10-31T21:57:44.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21076" PostTypeId="1" AcceptedAnswerId="21089" CreationDate="2019-11-01T10:19:29.240" Score="1" ViewCount="320" Body="&lt;p&gt;After the last update of the wingpanel yesterday the locale became a &lt;strong&gt;white colored text over a white background&lt;/strong&gt;, and I don't find it &quot;super sexy&quot; like this. Is it possible to style it somehow, for example to keep the white text but to completely remove (make it transparent) the background?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-03T05:04:57.027" Title="Wingpanel locale styling" Tags="|updates|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21077" PostTypeId="1" CreationDate="2019-11-01T14:19:18.287" Score="0" ViewCount="157" Body="&lt;p&gt;I am trying to create a bootable usb for elemental os using etcher, but I keep running into the error, &quot;Something went wrong. If it is a compressed image, please check that the archive is not corrupted.&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried downloading the iso from the site many times, but it still did not fix this issue. I also tried different usb stick. But nothing seems to be working. Also the downloaded iso is not a compressed file.&lt;/p&gt;&#xA;" OwnerUserId="19344" LastActivityDate="2024-03-10T14:04:40.653" Title="Unable to create bootable usb" Tags="|usb-drive|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21078" PostTypeId="2" ParentId="21029" CreationDate="2019-11-01T14:28:11.913" Score="0" Body="&lt;p&gt;I have run the same problem few times and I do not know a universal solution, because probably it has different reasons to occure. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1/ I recommend you to try the solution on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12155/desktop-takes-forever-to-load-after-restart&quot;&gt;Desktop takes forever to load after restart&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;2/ If it does not help,go into console login by pressing ctr+alt+F1 and after login there type &lt;code&gt;sudo service lightdm restart&lt;/code&gt; and probably you will be redirected again to the login screen of the pantheon-greeter. If it does not happen but errors occured, then type into console &lt;code&gt;reboot&lt;/code&gt; and usually after the reboot (or login again through graphical login interface of the greeter) the problem is resolved. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;3/ I do this when the above does not help - it is to reinstall the nvidia drivers. I use the proprietary ones from &lt;a href=&quot;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&lt;/a&gt; . You can add them by executing into console login (ctrl+alt+f1) the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa &#xA; sudo apt update &#xA; sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-01T14:28:11.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21079" PostTypeId="1" CreationDate="2019-11-01T17:44:59.043" Score="0" ViewCount="79" Body="&lt;p&gt;I know I'm using an old entry level laptop (specs in the end), but I'm having problems with instability with Elementary OS that I never had with Gnome Shell and lighter DEs like MATE with Compiz, whenever I change brightness (it always happens, the exception being change brightness again a few seconds after doing it the last time), and sometimes even starting to type, opening the menu or changing volume causes a freeze on the system (I can move the mouse but can't do anything), most of the time it freezes for like 1-2 seconds but sometimes it can take up to 10 seconds for the system to recover. I checked system monitor and whenever I change brightness, I have a spike on processor usage up to 100% in just one thread. I thought it might be due to swapping but it happens even when there is below 1GB of RAM usage and no swapping.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Specs:&lt;/strong&gt;&#xA;Intel Core i3-3217U (2C4T, 1.8GHz), 32GB SSD where the system is installed + HDD for data, 4GB 1600MHz DDR3 RAM, Intel HD 4000 IvyBridge graphics. Temperatures are fine and the processor usage is usually pretty low, except when viewing videos on Youtube or having constant swapping.&lt;/p&gt;&#xA;" OwnerUserId="19346" LastActivityDate="2019-11-01T17:44:59.043" Title="Freezing and spike in processor usage when changing brightness" Tags="|release-juno|system|pantheon|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21082" PostTypeId="2" ParentId="21077" CreationDate="2019-11-02T04:32:12.133" Score="0" Body="&lt;p&gt;I make bootable USB with rufus on windows, running normal very easily..&lt;/p&gt;&#xA;" OwnerUserId="19350" LastActivityDate="2019-11-02T04:32:12.133" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21083" PostTypeId="2" ParentId="19109" CreationDate="2019-11-02T04:35:12.023" Score="0" Body="&lt;p&gt;I use Lenovo ideapad 110 running normal no lag..&lt;/p&gt;&#xA;" OwnerUserId="19350" LastActivityDate="2019-11-02T04:35:12.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21084" PostTypeId="2" ParentId="19436" CreationDate="2019-11-02T07:29:13.063" Score="1" Body="&lt;p&gt;The problem is with &lt;code&gt;grpcio&lt;/code&gt; in &lt;code&gt;ui/requirements.txt&lt;/code&gt; first line. Delete it and &lt;code&gt;make&lt;/code&gt; the project. Source code path: &lt;code&gt;$GOPATH//src/github.com/evilsocket/opensnitch/ui&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# grpcio==1.0.0&#xA;grpcio-tools==1.10.1&#xA;pyinotify==0.9.6&#xA;unicode_slugify==0.1.3&#xA;pyqt5==5.10.1&#xA;configparser==3.5.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19353" LastActivityDate="2019-11-02T07:29:13.063" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21085" PostTypeId="1" CreationDate="2019-11-02T19:12:11.217" Score="0" ViewCount="50" Body="&lt;p&gt;Downloaded and Installed on USB but it won't install. It has errors, but I can't remember what it said. Can I download a fresh copy again?&lt;/p&gt;&#xA;" OwnerUserId="19356" LastEditorUserId="15904" LastEditDate="2019-11-17T13:02:05.467" LastActivityDate="2019-11-17T13:02:05.467" Title="Downloaded and Installed on USB but it won't install" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21087" PostTypeId="1" CreationDate="2019-11-02T23:13:55.183" Score="2" ViewCount="322" Body="&lt;p&gt;I'd like to reduce the spacing between the icons in the system tray on the top right, the spacing seems out of place with the rest of the design and it's melting my brain a little.  I've hunted on here and google and found a fix which involves changing the 'padding' in the app.css file but it's not working for me. Is the system using a different .css maybe? Does anyone know any other workarounds for this?&lt;/p&gt;&#xA;" OwnerUserId="19362" LastEditorUserId="19362" LastEditDate="2019-11-02T23:28:12.753" LastActivityDate="2020-02-20T20:27:40.487" Title="How do I reduce the gap between the icons on the system tray?" Tags="|release-juno|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21088" PostTypeId="2" ParentId="18404" CreationDate="2019-11-02T23:23:08.427" Score="0" Body="&lt;p&gt;I'm currently automating my entire Elementary OS installation, and you have this other option&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;touch $HOME/.config/plank/dock1/launchers/trash.dockitem&#xA;sed -i 's%Launcher=%Launcher=docklet://trash%g' $HOME/.config/plank/dock1/launchers/trash.dockitem&#xA;killall plank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Explanation&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;LINE 1&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;I create blank shortcut in the plank config launcher folder&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;touch $HOME/.config/plank/dock1/launchers/trash.dockitem&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the file will automatically have the following content:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#This file auto-generated by Plank.&#xA;#2019-...&#xA;&#xA;[PlankDockItemPreferences]&#xA;#The uri for this item.&#xA;Launcher=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;LINE 2&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;To replace the good option I use &lt;code&gt;sed&lt;/code&gt;, I had to use the method with &lt;code&gt;%&lt;/code&gt; instead of &lt;code&gt;'&lt;/code&gt; because there are &lt;code&gt;/&lt;/code&gt; in the string to replace&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good option : docklet://trash&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sed -i 's%Launcher=%Launcher=docklet://trash%g' $HOME/.config/plank/dock1/launchers/trash.dockitem&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;LINE 3&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;We are restart &lt;code&gt;plank&lt;/code&gt;, this is the only way I've found for the icon to get started without restarting&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall plank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt; : I do not think killing &lt;code&gt;plank&lt;/code&gt; processes like that is a good idea, you can reboot the system and normally the icon will appear, it will have all the property of a real trash : filled when there is content, empty when it is empty, the menu of the trash when we do a right click on it.&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-11-02T23:32:51.787" LastActivityDate="2019-11-02T23:32:51.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21089" PostTypeId="2" ParentId="21076" CreationDate="2019-11-03T05:04:57.027" Score="1" Body="&lt;p&gt;Found the solution :)&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;As admin, open &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt; file.&lt;/li&gt;&#xA;&lt;li&gt;Find the lines:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;.composited-indicator .keyboard {&#xA;    background-color: #fff;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Change the &lt;code&gt;background-color&lt;/code&gt; parameter to whatever you want (and then save and reboot). &#xA;Blue, for example, is &lt;code&gt;#0099ff&lt;/code&gt;: &lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DJH8m.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DJH8m.png&quot; alt=&quot;keyboard indicator&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-11-03T05:04:57.027" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21090" PostTypeId="2" ParentId="21087" CreationDate="2019-11-03T09:52:46.717" Score="2" Body="&lt;p&gt;Padding doesn't work anymore, for some reason, on Wingpanel 2.2.6.&#xA;There is however a solution and you can find it here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1#issuecomment-546731215&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators/issues/1#issuecomment-546731215&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Big thanks to Marcus André (&lt;a href=&quot;https://github.com/marcussacana&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/marcussacana&lt;/a&gt;) who made this fix.&lt;/p&gt;&#xA;" OwnerUserId="19143" LastActivityDate="2019-11-03T09:52:46.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21092" PostTypeId="1" CreationDate="2019-11-03T14:45:54.890" Score="0" ViewCount="42" Body="&lt;p&gt;I have a Lenovo ideapad 330, which came with windows 10 preinstalled. A few days ago I made a partition and installed eOS on it for dual booting.&#xA;While -- when I use windows 10 -- setting the volume of the speakers at around 20% for listening to music and around 40-50% for watching movies is enough for a comfortable experience, when I boot into Juno the volume has to be AT LEAST doubled and in some cases even at 100% it's barely audible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea why and how to fix it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry if this is a beginner, stupid question, but I AM a beginner with linux and elementary and am still trying to find my way around.&#xA;Today I noticed in the sound settings window the word 'unamplified' (bottom left of the window). May this be the reason, meaning, maybe windows has it amplified but elementary doesn't? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This problem with the sound really bothers me. The other day I was listening to a podcast and had to put a lot of effort to hear it, even though volume was at maximum!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help.&#xA;And thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I to assume that NOBODY else experiences this problem, or have any idea of what could the possible causes and solutions be?&#xA;Or is maybe my question poorly formulated? If so, suggestions of improvement for clarification are more than welcome.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastEditorUserId="15904" LastEditDate="2019-11-17T13:01:52.170" LastActivityDate="2019-11-17T13:01:52.170" Title="Volume of sound (on speakers) when running eOS in a Lenovo ideapad 330 is much different than when running windows 10 on the same computer (dual boot)" Tags="|release-juno|system|sound|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21093" PostTypeId="1" CreationDate="2019-11-03T15:27:35.247" Score="0" ViewCount="867" Body="&lt;p&gt;I found some similar post but not fully satisfied with answers and not fully related to this question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Default font in elementary OS is &lt;strong&gt;Dejavu Sans&lt;/strong&gt; by command &lt;strong&gt;&lt;code&gt;fc-match&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output in EOS : &lt;code&gt;$ fc-match&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;DejaVuSans.ttf: &quot;DejaVu Sans&quot; &quot;Book&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Output for this script :&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;for family in serif sans-serif monospace Arial Helvetica Verdana &quot;Times New Roman&quot; &quot;Courier New&quot;; do&#xA;  echo -n &quot;$family: &quot;&#xA;  fc-match &quot;$family&quot;&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is this :&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;serif: DejaVuSerif.ttf: &quot;DejaVu Serif&quot; &quot;Book&quot;&#xA;sans-serif: Arimo-Regular.ttf: &quot;Arimo&quot; &quot;Regular&quot;&#xA;monospace: Cousine-Regular.ttf: &quot;Cousine&quot; &quot;Regular&quot;&#xA;Arial: Arimo-Regular.ttf: &quot;Arimo&quot; &quot;Regular&quot;&#xA;Helvetica: Arimo-Regular.ttf: &quot;Arimo&quot; &quot;Regular&quot;&#xA;Verdana: DejaVuSans.ttf: &quot;DejaVu Sans&quot; &quot;Book&quot;&#xA;Times New Roman: Tinos-Regular.ttf: &quot;Tinos&quot; &quot;Regular&quot;&#xA;Courier New: Cousine-Regular.ttf: &quot;Cousine&quot; &quot;Regular&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This font applied to all languages in Elementary OS system&#xA;Example scenario :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you install Firefox or Chromium you will find that browser default font choose Dejavu Sans and compare this scenario in windows system that choose &lt;strong&gt;Segoe UI&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As other apps can show you too, that for ENG and other languages like Germany and Japanese and Persian or Arabic Dejavu Sans is chosen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I want to change fc-match font in Elementary OS&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This help me to change font for all language and choose a better replace font.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Feedback for EOS Dev team :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please consider another font for Elementary OS than Dejavu Sans for System Fonts&lt;/p&gt;&#xA;" OwnerUserId="19284" LastEditorUserId="19284" LastEditDate="2019-11-03T15:33:03.727" LastActivityDate="2024-03-12T07:03:55.443" Title="Change default font Elementary OS Juno" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21094" PostTypeId="2" ParentId="18456" CreationDate="2019-11-03T15:43:57.557" Score="0" Body="&lt;p&gt;Fixed in latest update, you can change your cursor size in dconf &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also revert back theme is FIXED too&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Path in changing cursor size is :&#xA;&lt;code&gt;org &amp;gt; gnome &amp;gt; desktop &amp;gt; interface &amp;gt; cursor-size&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;21&lt;/code&gt; is best size for 4K HiDPi Screens&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theme can be applied in elementary-os tweak or gnome tweak no different&lt;/p&gt;&#xA;" OwnerUserId="19284" LastActivityDate="2019-11-03T15:43:57.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21095" PostTypeId="2" ParentId="19054" CreationDate="2019-11-03T15:46:00.187" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18456/mouse-cursor-size-and-theme-not-adjustable/21094&quot;&gt;Duplicate&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fixed in latest update, you can change your cursor size in dconf &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also revert back theme is FIXED too&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Path in changing cursor size is :&#xA;&lt;code&gt;org &amp;gt; gnome &amp;gt; desktop &amp;gt; interface &amp;gt; cursor-size&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;21&lt;/code&gt; is best size for 4K HiDPi Screens&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Theme can be applied in elementary-os tweak or gnome tweak no different&lt;/p&gt;&#xA;" OwnerUserId="19284" LastActivityDate="2019-11-03T15:46:00.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21097" PostTypeId="1" CreationDate="2019-11-03T19:56:07.610" Score="5" ViewCount="905" Body="&lt;p&gt;After enabling flatpak by default (as proclaimed by the elementary team) my AppCentre still does not recognize flatpak apps as it should.&lt;/p&gt;&#xA;&lt;p&gt;Do I need to do something here, or is it a bug?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Can I know one example, where I could see this dropdown enabling menu? I don't seem to be able to find one. Even the flatpaks I had installed before this don't appear in the installed category. Have I managed to break something here?&lt;/p&gt;&#xA;" OwnerUserId="19366" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:17.920" LastActivityDate="2023-11-18T18:40:17.920" Title="Flatpak support not enabled" Tags="|appcenter|flatpak|sideload|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21098" PostTypeId="1" AcceptedAnswerId="21099" CreationDate="2019-11-03T20:48:46.473" Score="0" ViewCount="45" Body="&lt;p&gt;Just a few hours ago elementary was working fine.&#xA;I restarted the computer and booted into windows.&#xA;Now I restarted it again to boot back into eOS and first thing different was that instead the regular login page, where we see the big, beautiful background image and a small window somewhat to the left to log in, there was a black background with a small window right in the middle and inside this window sort of a thumbnail image of the standard elementary background. Also the fonts in this window were totally different than they used to be. I logged in and a totally empty black screen appears. I can see the cursor and move it, but that is all, nothing happens. Now I booted from the live USB I used to install elementary 2 days ago. How can I fix this problem?&lt;/p&gt;&#xA;" OwnerUserId="19358" LastEditorUserId="19358" LastEditDate="2019-11-03T22:22:34.257" LastActivityDate="2019-11-14T06:11:06.070" Title="Changed login page appears, and after I log in a black, empty screen appears" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21099" PostTypeId="2" ParentId="21098" CreationDate="2019-11-03T21:26:03.697" Score="1" Body="&lt;p&gt;The login screen was changed after an update of pantheon-greeter and what you describe now it is the new, normal for all login screen. The empty desktop is an issue for a lot of people, including me. I have NVIDIA graphics and reinstalling the drivers helped me, but sometimes its solved by itself.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-11-14T06:11:06.070" LastActivityDate="2019-11-14T06:11:06.070" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21100" PostTypeId="2" ParentId="21093" CreationDate="2019-11-03T21:41:45.343" Score="0" Body="&lt;p&gt;I have the same output of the &lt;code&gt;fc-match&lt;/code&gt; command but my default font is different - changed by me using graphical interface provided by elementary tweaks. It is a third party package which gives additional options into system settings. See the accepted answer there how to install it - &lt;a href=&quot;https://elementaryos.stackexchange.com/a/17240/12483&quot;&gt;https://elementaryos.stackexchange.com/a/17240/12483&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-03T21:41:45.343" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21101" PostTypeId="2" ParentId="21030" CreationDate="2019-11-04T00:11:44.113" Score="1" Body="&lt;p&gt;I'm not so familiar with the computer you have but as long as Windows XP runs slow probably it is not a good idea. What I recommend you is to make a live usb and try it, probably with some older version of the OS (&lt;a href=&quot;http://osarchive.sda1.eu/elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://osarchive.sda1.eu/elementary-os&lt;/a&gt;) because if I am not wrong, your computer is 32bit (i386) but all later versions of the elementary os are 64bit (amd64) and they will not run on your hardware.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-04T00:11:44.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21104" PostTypeId="1" CreationDate="2019-11-04T04:45:12.133" Score="0" ViewCount="113" Body="&lt;p&gt;it takes to nearly about 2 mins for the wing panel to load this is occured after update only. Kindly provide a fix for wing panel in the next update &lt;/p&gt;&#xA;" OwnerUserId="19369" LastActivityDate="2024-02-15T21:06:30.743" Title="Wing panel crashes after elementary os updates" Tags="|wingpanel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21105" PostTypeId="2" ParentId="21097" CreationDate="2019-11-04T12:01:55.653" Score="2" Body="&lt;p&gt;First, make sure your system is up-to-date:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, install the sideload package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install io.elementary.sideload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, you'll be able to open flatpack files with Sideload, and it will prompt you whether you want to install the app. In the AppCenter, apps that are available from multiple sources will have a dropdown enabling you to choose which one to install.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-04T12:01:55.653" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21107" PostTypeId="1" AcceptedAnswerId="21110" CreationDate="2019-11-05T00:57:17.460" Score="1" ViewCount="268" Body="&lt;p&gt;When trying to open the trash on Files app the trash doesn't open and gives a message saying that the server of that folder could not be found, as per the picture. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Yb9aT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Yb9aT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The address of the trash folder is &lt;code&gt;trash:///&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2019-11-05T06:02:29.510" Title="Trash folder doesn't open on files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21108" PostTypeId="1" CreationDate="2019-11-05T04:15:58.050" Score="0" ViewCount="139" Body="&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/webupd8team/tor-browser/ubuntu bionic Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19364" LastEditorUserId="16827" LastEditDate="2019-11-07T11:57:39.257" LastActivityDate="2019-12-07T16:01:55.493" Title="In app centre it is showing failed to fetch updates" Tags="|updates|appcenter|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21109" PostTypeId="2" ParentId="21108" CreationDate="2019-11-05T05:22:03.840" Score="2" Body="&lt;p&gt;The tor-browser package in that ppa has not been updated in a very long time, I do not recommend using it. My suggestion is to remove that ppa, to get AppCenter working again, and then install tor from the ubuntu repository (as per the &lt;a href=&quot;https://2019.www.torproject.org/docs/debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tor Project's instructions&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove the obsolete ppa:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:webupd8team/tor-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that, run &lt;code&gt;sudo apt update&lt;/code&gt; to see if the error is gone. If all is well, try running &lt;code&gt;sudo apt upgrade&lt;/code&gt; to bring your system up-to-date.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-05T05:22:03.840" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21110" PostTypeId="2" ParentId="21107" CreationDate="2019-11-05T05:41:05.023" Score="1" Body="&lt;p&gt;Open Files and in the address bar try accessing &lt;code&gt;~/.local/share/Trash/files/&lt;/code&gt; to see the contents of the Trash Folder. If this works, and you are able to see the contents, you can choose some files to undelete by selecting them, &lt;code&gt;Ctrl+X&lt;/code&gt; to cut them, and them &lt;code&gt;Ctrl+V&lt;/code&gt; in some other folder (by design, right clicking in the Trash folder displays a menu containing just a Paste entry).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The error should go away by emptying the trash folder by deleting the contents of &lt;code&gt;~/.local/share/Trash/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another simpler way to empty it is by right-clicking the Trash link in the Files sidebar and selecting &lt;code&gt;Empty Trash&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: looking closer at your screenshot, I see you have multiple devices, and a network share. It is worth having a look at .Trash folders on those devices, since Files will try to display their contents as well (to see the .Trash folders on those devices, right-click an empty area in Files and select &lt;code&gt;Show hidden Files&lt;/code&gt;). I believe that mounting all your devices and shares, and then trying to access the Trash from the Files sidebar will work.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-11-05T06:02:29.510" LastActivityDate="2019-11-05T06:02:29.510" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21111" PostTypeId="2" ParentId="21028" CreationDate="2019-11-05T07:40:12.520" Score="0" Body="&lt;p&gt;Here on elementaryos.stackexchange.com is just a community of users with more or less experience in using elementary OS. Probably some developpers also read the questions, but the official way to report bugs like this has to be done into the elementary OS devs team on gitHub - &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-05T07:40:12.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21113" PostTypeId="1" CreationDate="2019-11-06T06:23:02.880" Score="1" ViewCount="476" Body="&lt;p&gt;When using Sideload to install any &lt;code&gt;*.flatpakref&lt;/code&gt; file that is downloaded from the Flathub site(clicking on &lt;kbd&gt;Install&lt;/kbd&gt;), the installation is stuck at the preparing screen. ( this issue is specifically about new bundle functionality?)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MP1Xr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MP1Xr.jpg&quot; alt=&quot;screenshot of the popup where the process stopped with the text 'Installing &amp;quot;com.spotify.Client from flathub&amp;quot;\nPreparing...'&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19372" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:33.897" LastActivityDate="2023-12-19T00:04:10.527" Title="Using the SIdeload app to install .flatpakref files stuck at Preparing screen during installation" Tags="|software-installation|flatpak|sideload|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21115" PostTypeId="1" CreationDate="2019-11-06T17:27:37.113" Score="2" ViewCount="66" Body="&lt;p&gt;The Updates Notification does nothing. It would make more sense if clicking on the notification would cause the application center to display the updates screen.&lt;/p&gt;&#xA;" OwnerUserId="19379" LastActivityDate="2019-11-06T23:46:54.657" Title="Suggestion - Updates Notification Action" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21117" PostTypeId="2" ParentId="21097" CreationDate="2019-11-06T19:13:07.340" Score="1" Body="&lt;p&gt;What I am doing is going to FlatHub (&lt;a href=&quot;https://flathub.org/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/home&lt;/a&gt;), find the app I need, and install it. Like this,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/i19FY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i19FY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18959" LastActivityDate="2019-11-06T19:13:07.340" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21118" PostTypeId="2" ParentId="18127" CreationDate="2019-11-06T20:55:52.700" Score="0" Body="&lt;p&gt;Try this out &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 7755 /usr/lib/policykit-1/polkit-agent-helper-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19381" LastEditorUserId="16827" LastEditDate="2019-11-07T11:59:17.113" LastActivityDate="2019-11-07T11:59:17.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21119" PostTypeId="2" ParentId="21115" CreationDate="2019-11-06T23:46:54.657" Score="1" Body="&lt;p&gt;It does.&#xA;I just got notified of an available update, clicked on the notification and the update screen opened.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-11-06T23:46:54.657" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21120" PostTypeId="1" AcceptedAnswerId="21546" CreationDate="2019-11-06T23:51:32.293" Score="1" ViewCount="307" Body="&lt;p&gt;I'm primarily looking for guidance on how to continue debugging this problem if no answer is readily available. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on the latest Dell XPS 13 developer edition with the 10th generation Intel processor. I am attempting to boot an Elementary OS Juno live USB. After selecting the USB as a boot device I get to the grub prompt and select &quot;Try elementary is before installing&quot; this then hangs at a blank screen (no cursor so is not similar to the nomodeset problems of yore). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The computer does not advance past this screen. I have tried editting the boot entry to remove quiet and nosllash and set the gfx mode to text. All permutations have not had any effect. The same USB I'm booting from does boot instantly on my Thinkpad T480. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using UEFI boot with secure boot disabled. There is no BIOS or legacy boot option available on this system. &lt;/p&gt;&#xA;" OwnerUserId="16043" LastActivityDate="2019-12-11T22:21:15.630" Title="Live USB does not boot on new XPS 13" Tags="|release-juno|boot|live-cd|live-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21121" PostTypeId="1" CreationDate="2019-11-07T02:25:12.463" Score="1" ViewCount="62" Body="&lt;p&gt;I'm trying to install on hp envy with amd10 and radeon r6 but can't get it to install or to boot from usb and I couldn't find any answer to fix this. &#xA;After acpi=off on boot I get the elementary logo but nothing more.&#xA;I have no idea what's going on and I'm not that good at linux, so better than trying to explain I've attached screenshots of the different errors I get.&#xA;Any help would be highly appreciated.&#xA;Thanks&#xA;&lt;img src=&quot;https://i.stack.imgur.com/AlKED.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="19383" LastActivityDate="2019-11-07T02:25:12.463" Title="Can't install juno on hp envy" Tags="|release-juno|software-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21122" PostTypeId="1" AcceptedAnswerId="21224" CreationDate="2019-11-07T06:42:25.003" Score="2" ViewCount="510" Body="&lt;p&gt;I am a beginner in using elementary OS. I really like the look and feel of the elementary OS and like to setup a development environment in my PC for &lt;a href=&quot;https://flutter.dev/&quot; rel=&quot;nofollow noreferrer&quot;&gt;flutter&lt;/a&gt; application development. I googled for which is the best OS elementary OS vs Ubuntu, it's shows me Ubuntu is the suitable OS for development purpose. Is there any flutter developer using elementary OS, please share the experience and difficulties you faced while using elementary OS as development environment. Because i want a stable with light weight and beautiful OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="17743" LastActivityDate="2019-11-18T07:19:25.843" Title="Flutter development environment in elementary OS" Tags="|development|vscode|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21123" PostTypeId="1" CreationDate="2019-11-07T13:53:25.760" Score="3" ViewCount="215" Body="&lt;p&gt;Frequently I need to lock my screen using &lt;code&gt;Super+L&lt;/code&gt;, but when I put my password to unlock, the system presents a black screen for over 10 seconds. After that all things are ok, but this black screen is the worst.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Distributor ID: elementary&#xA;Description:    elementary OS 5.0 Juno&#xA;Release:    5.0&#xA;Codename:   juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19385" LastActivityDate="2024-03-19T23:06:30.803" Title="Black screen after unlock screen" Tags="|release-juno|display|system|elementary-project|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21124" PostTypeId="1" CreationDate="2019-11-07T19:11:21.187" Score="1" ViewCount="176" Body="&lt;p&gt;I have problems in list of contacts of Pantheon-mail.&#xA;I found that it is not possible to manage this list within mail&#xA;and that no additional tool can do the job !&#xA;Where are located the data files of Pantheon-mail ?&lt;/p&gt;&#xA;" OwnerUserId="19386" LastActivityDate="2019-11-08T07:15:35.647" Title="Contacts list in Pantheon-mail" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21125" PostTypeId="1" CreationDate="2019-11-07T21:31:16.973" Score="1" ViewCount="61" Body="&lt;p&gt;I've tried finding it on Github or App Center however I didn't. Is there any way to reinstall Epiphany?&lt;/p&gt;&#xA;" OwnerUserId="19389" LastActivityDate="2019-11-08T03:20:18.287" Title="I've deleted Epiphany and I don't know how to get it back" Tags="|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21126" PostTypeId="2" ParentId="21125" CreationDate="2019-11-08T03:20:18.287" Score="3" Body="&lt;p&gt;You can go to appCenter search &quot;epiphany&quot; and download it again. Or, in terminal type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install epiphany-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GCzdu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GCzdu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18959" LastActivityDate="2019-11-08T03:20:18.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21127" PostTypeId="2" ParentId="21124" CreationDate="2019-11-08T07:10:02.607" Score="2" Body="&lt;p&gt;You can find pantheon-mail's data in &lt;code&gt;~/.local/share/pantheon-mail/&lt;/code&gt;. Inside this folder you'll find a folder for each email account. Inside each account folder you'l find an attachements folder, a geary.ini file, and a geary.db file. The geary.db file can be opened with any SQLite client. &lt;a href=&quot;https://sqlitebrowser.org/dl/&quot; rel=&quot;nofollow noreferrer&quot;&gt;DB Browser for SQLite&lt;/a&gt; works great: &lt;code&gt;sudo apt install sqlitebrowser&lt;/code&gt;. The ContactTable contains everything related to the Contacts from the elementary OS email client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: &lt;a href=&quot;https://appcenter.elementary.io/com.github.alecaddd.sequeler/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Sequeler&lt;/a&gt; also works fine, and it's designed for elementary OS :)&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-11-08T07:15:35.647" LastActivityDate="2019-11-08T07:15:35.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21128" PostTypeId="1" AcceptedAnswerId="21129" CreationDate="2019-11-08T07:57:37.157" Score="2" ViewCount="37" Body="&lt;p&gt;I've been playing around with Gtk and vala and I love it; however, I've created two simple apps that I don't know how to delete from my system. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7IRoK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7IRoK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19390" LastActivityDate="2019-11-08T08:45:14.133" Title="Delete Applications - Self Made With Gtk Tutorial" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21129" PostTypeId="2" ParentId="21128" CreationDate="2019-11-08T08:45:14.133" Score="1" Body="&lt;p&gt;If you still have the source code, use &lt;code&gt;sudo ninja uninstall&lt;/code&gt; inside the build folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you removed the build folder by any chance, run &lt;code&gt;meson build --prefix=/usr&lt;/code&gt; to recreate the build folder, followed by &lt;code&gt;cd build &amp;amp;&amp;amp; ninja&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you no longer have the source code, you'll have to manually remove your binary from &lt;code&gt;/usr/bin/&lt;/code&gt; and the .desktop file from &lt;code&gt;/usr/share/applications/&lt;/code&gt;. Also, look inside &lt;code&gt;/usr/share/glib-2.0/schemas/&lt;/code&gt; and &lt;code&gt;/usr/share/metainfo/&lt;/code&gt; for any xml files.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-08T08:45:14.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21130" PostTypeId="1" CreationDate="2019-11-08T13:27:37.357" Score="1" ViewCount="107" Body="&lt;p&gt;Here's my problem. Let me know if anyone knows how to fix it. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/x4gMS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x4gMS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19390" LastActivityDate="2024-03-17T10:02:50.317" Title="How to fix the font inside terminal?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21131" PostTypeId="2" ParentId="21130" CreationDate="2019-11-08T17:30:57.940" Score="0" Body="&lt;p&gt;Looks like you're using an unsuitable font. Let's try setting the Terminal's font back to default:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings font ''&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart Terminal to verify. Terminal is supposed to use a Monospace variety, any other font type will look abnormal.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-08T17:30:57.940" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21133" PostTypeId="1" AcceptedAnswerId="21149" CreationDate="2019-11-09T06:36:35.920" Score="0" ViewCount="38" Body="&lt;p&gt;When booting the USB the media check option simply restarts the computer, I've checked the sha256 sum and used the recommended methods (etcher and unetbootin) , can someone confirm the media check has worked for them (or that it's known to not work for anyone.) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my first post to appear negative, just trying to point out a bug to fix. I really appreciate the work that's gone into Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="19404" LastActivityDate="2019-11-10T22:00:25.470" Title="USB seems to run fine but media check fails" Tags="|release-juno|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21136" PostTypeId="1" AcceptedAnswerId="21137" CreationDate="2019-11-09T17:22:46.730" Score="0" ViewCount="35" Body="&lt;p&gt;I'm &lt;strong&gt;totally&lt;/strong&gt; new to the linux world, so I know it might not be a wise decision to completely de-install windows 10 (which I have in dual boot with Juno).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Still, despite of the nerving sound problem, which seems to happen only to me, since nobody answered my question about it, I'm feeling inclined to get rid of windows for good and keep elementary as the only OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I do that?&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-11-09T19:44:07.077" Title="De-installing windows?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21137" PostTypeId="2" ParentId="21136" CreationDate="2019-11-09T19:27:18.807" Score="0" Body="&lt;p&gt;If it's an EFI install you can simply use a program like GParted or Gnome Disk Utility to delete the Windows partitions (not including the EFI partition) and then run 'sudo update-grub'. If you run 'sudo ls /boot/efi/EFI/ubuntu' what do you see?&lt;/p&gt;&#xA;" OwnerUserId="19404" LastEditorUserId="19404" LastEditDate="2019-11-09T19:44:07.077" LastActivityDate="2019-11-09T19:44:07.077" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21138" PostTypeId="1" AcceptedAnswerId="21139" CreationDate="2019-11-09T20:07:40.767" Score="2" ViewCount="825" Body="&lt;p&gt;Hey there I would like to get into the Linux world and Elementary OS looks very nice. Currently I'm using Windows and would like to leave it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I read some information from the homepage I always see the Mac keyboard icons but never Windows keyboard icons. This image for example&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UQ5wV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UQ5wV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got to know that I can use Tweaks to change the windows layout from Elementary to Mac, Windows or other ones but what about the keyboard? By that I mean when pressing the windows key for example it will open the applications menu. Is Elementary OS the right thing for me as a Windows keyboard user?&lt;/p&gt;&#xA;" OwnerUserId="19410" LastActivityDate="2019-11-09T20:14:13.373" Title="Is Elementary OS designed for Mac keyboards?" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21139" PostTypeId="2" ParentId="21138" CreationDate="2019-11-09T20:14:13.373" Score="7" Body="&lt;p&gt;elementary OS uses the command key found on Mac keyboards to represent the superkey (Which is usually represented as the &quot;windows key&quot; on most keyboards.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it's fine. You won't have any problems.&lt;/p&gt;&#xA;" OwnerUserId="19411" LastActivityDate="2019-11-09T20:14:13.373" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21140" PostTypeId="2" ParentId="21120" CreationDate="2019-11-09T20:28:56.337" Score="2" Body="&lt;p&gt;In my experience this kind of hang is due to a lack of GPU/video support. I'd say you need to boot into an un-accelerated 'safe' video mode and keep using it until you've run a full update (new kernel, new video drivers.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press 'e' on the try elementary os option and add 'nomodeset' (without brackets) to the portion that says 'splash quiet&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install as usual and run a full update. Then remove the 'nomodeset' text from '/etc/default/grub' and run 'update-grub'.&lt;/p&gt;&#xA;" OwnerUserId="19404" LastActivityDate="2019-11-09T20:28:56.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21141" PostTypeId="1" CreationDate="2019-11-09T23:46:19.217" Score="1" ViewCount="16" Body="&lt;p&gt;My apologies for being a n00b but I am dusting my linux back off after many years on Windows and exploring Elementary OS. I like what I see so far but I cannot get my wireless adapter to work. Does anyone have any tips?&lt;/p&gt;&#xA;" OwnerUserId="19413" LastActivityDate="2019-11-09T23:46:19.217" Title="Inamax Wireless Adapter not working" Tags="|wifi|hardware|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21144" PostTypeId="1" CreationDate="2019-11-10T04:49:48.997" Score="1" ViewCount="16" Body="&lt;p&gt;The new AppCenter package for Juno, 3.2.0, which installed additional packages  for Flatpak, broke all contact with the DEB repos.  Updates that work fine with apt update/upgrade do not show up in AppCenter anymore- at all.  This happened in a VM and on physical hardware.&lt;/p&gt;&#xA;" OwnerUserId="19415" LastActivityDate="2019-11-10T04:49:48.997" Title="Juno AppCenter 3.2.0 deb based updates ignored" Tags="|release-juno|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21145" PostTypeId="1" CreationDate="2019-11-10T06:09:13.993" Score="1" ViewCount="23" Body="&lt;p&gt;With the ath9k driver, the recent Network Manager (1.10.14) update creates &quot;pauses&quot; in applications that use the network without buffering.  In Terminal, using, say, ssh, one will type something and wait ten seconds for all of it to echo.  Or eboard, a chess (FICS) interface, will show no moves and then &quot;jump&quot; forward, as moves were made but you couldn't see them until the &quot;freeze&quot; interval was over.  The pauses are irregular in both interval and duration.   Zero issues for months, then the update, and &lt;em&gt;splat&lt;/em&gt;.  journalctl -u NetworkManager shows nothing unusual.&lt;/p&gt;&#xA;" OwnerUserId="19415" LastActivityDate="2019-11-10T06:09:13.993" Title="Network Manager update has triggered network pauses" Tags="|release-juno|updates|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21146" PostTypeId="1" AcceptedAnswerId="21169" CreationDate="2019-11-10T12:02:25.730" Score="0" ViewCount="63" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ldudE.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stuck when installing, how i fix it?&lt;/p&gt;&#xA;" OwnerUserId="19417" LastActivityDate="2019-11-12T19:21:52.187" Title="Stuck at ip_tables (C) 2000-2002 Netfilter Core team when install" Tags="|release-juno|boot|usb|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21147" PostTypeId="1" CreationDate="2019-11-10T14:36:59.150" Score="4" ViewCount="5239" Body="&lt;p&gt;I have just installed Elementary OS (5.0) in a laptop which is otherwise booting to W10 and Linux Mint. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've never been a Mac user but I was intrigued when people said EO was &quot;very like Mac&quot;. And after installing it I find that it isn't really very much like Mac visually, compared for example to another Linux distro which I had a look at many years ago.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What about the nice little coloured buttons &quot;minimise, maxmimise, close&quot;, or the kind of metallic look of dialogs? What about the way the icons in the bottom bar (or whatever you call it) sort of jump up and down when loading? Even the icons (for the various default installed apps on the bottom bar) look rather flat and boring. Nothing like the lovely shiny &quot;bling&quot;, as we say in the UK, you get with Mac.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this maybe something to do with copyright? Would someone get sued if it looked more like Mac? Or is it actually difficult to do? I'm puzzled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know of any enhancements (skins, themes, or whatever these might be called) which give a better Mac look, please point me in the right direction.  &lt;/p&gt;&#xA;" OwnerUserId="19418" LastActivityDate="2020-09-05T23:45:41.397" Title="Can Elementary OS be made more like Mac?" Tags="|macintosh|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21149" PostTypeId="2" ParentId="21133" CreationDate="2019-11-10T22:00:25.470" Score="0" Body="&lt;p&gt;I just tried it in virtualbox, it has the correct sha256 and of course I simply select the ISO rather than copying it to a USB. It still throws an error and reboots instead of doing a media check. It seems to be broken (for everyone.)&lt;/p&gt;&#xA;" OwnerUserId="19404" LastActivityDate="2019-11-10T22:00:25.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21151" PostTypeId="2" ParentId="21147" CreationDate="2019-11-11T08:58:38.400" Score="2" Body="&lt;p&gt;Out of the top of my head, I can recommend &lt;a href=&quot;https://www.youtube.com/watch?v=3tK_bi_PFeY&quot; rel=&quot;nofollow noreferrer&quot;&gt;this short YouTube video&lt;/a&gt;. It contains a lot of information on apps and themes you'd need to install and configure in order to get a mac-like look and feel (window controls position and colors, dock animations, icon colors...).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To that, I would also add the mac-like gestures for the touchpad by using the instructions in &lt;a href=&quot;https://github.com/iberianpig/fusuma&quot; rel=&quot;nofollow noreferrer&quot;&gt;this GitHub repository&lt;/a&gt; (three-finger navigation and pinch to zoom).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are a plethora of other resources on the topic online, and numerous prebuilt packages that will deliver the macOS experience, but, in my experience, they do tend to break the functionality and consistency of the OS. My advice would be to setup a virtual elementary OS machine using &lt;a href=&quot;https://wiki.gnome.org/Apps/Boxes&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome Boxes&lt;/a&gt;, create a snapshot to be able to easily start from scratch, use that machine to experiment with different themes and apps, and when you're satisfied, replicate the setup on your laptop. If you get the time, feel free to publish here a list of the customizations you made, I believe there are some of us here looking for something like that. &lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-11T08:58:38.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21152" PostTypeId="1" AcceptedAnswerId="21218" CreationDate="2019-11-11T16:36:13.517" Score="2" ViewCount="181" Body="&lt;p&gt;I thought that the purpose of the Public folder was to share with other users on the computer. Anything added there would be made available instantly to the other users on the computer. However, that does not appear to be the case. Is there a way to make this happen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3fXl6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3fXl6.png&quot; alt=&quot;on the left an empty Public Folder - On the right, the supposed shared&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12511" LastActivityDate="2019-11-17T09:14:54.930" Title="How to use the &quot;Public&quot; folder to share files between users on the same computer?" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21153" PostTypeId="1" CreationDate="2019-11-11T16:44:52.617" Score="1" ViewCount="88" Body="&lt;p&gt;Just wanted to post that in my experience with Sideload and flatpakref files, I am not being asked to escalate privileges in order to install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this by design?&lt;/p&gt;&#xA;" OwnerUserId="6173" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:41.250" LastActivityDate="2023-11-18T18:40:41.250" Title="Flatpak and Sideload possible serious bug" Tags="|flatpak|sudo|sideload|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21154" PostTypeId="2" ParentId="21153" CreationDate="2019-11-11T16:51:26.177" Score="4" Body="&lt;p&gt;Okay, answering this rather than deleting it, just in case any other users get this confused like I did.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Escalation is not necessary because this is installing apps as the user.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2019-11-11T16:51:26.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21157" PostTypeId="2" ParentId="21152" CreationDate="2019-11-11T23:31:07.113" Score="2" Body="&lt;p&gt;If you want one folder for all users, yes it is possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before you start, please empty both the Public folders in order to prevent data loss. I will use into the command lines below &lt;strong&gt;user1&lt;/strong&gt; and &lt;strong&gt;user2&lt;/strong&gt; but you have to replace these strings with the &lt;strong&gt;actual usernames&lt;/strong&gt; you want to manipulate. The Public folder's icon of the Public folder of &lt;strong&gt;user2&lt;/strong&gt; will be changed, with an arrow sign informing that this is actually a simlink. All the commands have to be typed (or copy-paste and edit the user1 and user2) into Terminal application line by line and pressing Enter. You have to do this logged in into &lt;strong&gt;user1&lt;/strong&gt; account. You will use the &lt;strong&gt;sudo&lt;/strong&gt; command, which gives you administrative rights and that's why you will be asked for a password, probably only the first time you are using it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1. create a custom group for both of the users&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo addgroup sharedfolder&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;type your password and hit enter&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2. add both users into the group&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   sudo adduser user1 sharedfolder&#xA;&#xA;   sudo adduser user2 sharedfolder&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3. Change ownership of the Public folder to the new group&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown user1:sharedfolder /home/user1/Public&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;4. Change folder permissions in order to achieve the effect:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 2775 /home/user1/Public&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Explaining the permissions 2775 in the chmod command above:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;2 – turns on the setGID bit, implying–newly created subfiles inherit&#xA;the same group as the directory, and newly created subdirectories&#xA;inherit the set GID bit of the parent directory.&lt;/li&gt;&#xA;&lt;li&gt;7 – gives rwx permissions for owner.&lt;/li&gt;&#xA;&lt;li&gt;7 – gives rwx permissions for group.&lt;/li&gt;&#xA;&lt;li&gt;5 – gives rx permissions for others.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;(r=read, w=write, x = execute)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;5. Rremove the Public folder of user2:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /home/user2/Public&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will delete the folder with all contents and there is no easy way to return them back so you better not having there anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;6. Navigate to user2 home folder:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/user2/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;7. Create a symlink into the user2 home folder to the Public folder of user1:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ln -s /home/user1/Public&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now any file you &lt;strong&gt;copy and paste or create&lt;/strong&gt; into the Public folder will be with  2775 permissions and a sharedfolder group. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you &lt;strong&gt;cut some file from somewere and paste&lt;/strong&gt; it there, the permissions will not be changed and probably &lt;strong&gt;will be locked&lt;/strong&gt; for the other user unless you change group (&lt;strong&gt;sharedfolder&lt;/strong&gt;) and permissions (&lt;strong&gt;775&lt;/strong&gt;) before you log in into the other account.&lt;br&gt;&#xA;You can do this using your file manager, right click over the file or folder &gt; Porperties &gt; Permissions tab. See the folowing images for info, but much more easier is to copy/paste and delete source.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0nRKE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0nRKE.png&quot; alt=&quot;navigate to file properties&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/mMUf7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mMUf7.png&quot; alt=&quot;change Group and permissions&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-11-16T13:59:32.790" LastActivityDate="2019-11-16T13:59:32.790" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21159" PostTypeId="1" CreationDate="2019-11-12T01:25:02.270" Score="0" ViewCount="146" Body="&lt;p&gt;So I like &lt;em&gt;Byte music player&lt;/em&gt; more than the default music app in elementary OS, I've installed and used &lt;em&gt;Byte&lt;/em&gt; but in the settings in default applications it doesn't appear in the context menu of music players, Any idea of how can I make it appear in there?&lt;/p&gt;&#xA;" OwnerUserId="19432" LastEditorUserId="19360" LastEditDate="2019-12-31T13:00:59.443" LastActivityDate="2020-01-01T05:52:28.820" Title="How to make byte my default music player?" Tags="|settings|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21161" PostTypeId="1" CreationDate="2019-11-12T02:11:13.620" Score="0" ViewCount="229" Body="&lt;p&gt;I have elementary os 5.0 Loki installed on a Dell Latitude e6410. This machine will not stay awake whether it's on battery or plugged in! I will go and set the sleep time to never in power settings for both battery and plugged in and it will still just go to sleep after a while.&#xA;The one thing that is remarkable about the hardware, as far as I know, is that the laptop has a Nvidia GPU and we have had a fair amount of problems getting a proper driver for it. I'm familiar with alot of basic things in Linux but because I am not in Linux every day, there are alot of things I don't know. Any guidance would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="18514" LastEditorUserId="15904" LastEditDate="2019-11-16T04:23:51.193" LastActivityDate="2019-11-26T16:36:16.463" Title="How to get elementary os to stay awake" Tags="|release-loki|laptop|power|dell|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21162" PostTypeId="2" ParentId="18255" CreationDate="2019-11-12T02:24:45.480" Score="1" Body="&lt;p&gt;I haven't tried a backup solution I liked using or really trusted. Clonezilla seems particularly counter intuitive IMO.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I thought &quot;bootable&quot; backup I thought a script that rsyncs to an external HDD, rsync the EFI partition to a small FAT32 partition and rsync the rest to a large EXT4 partition. It would just be an exact copy of the moment you last ran the script though, there wouldn't be a GUI listing other days and weeks etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;rsync copies in a much smarter/faster fashion than cp (etc) if it's updating an existing group of files, I think most backup GUI's use it behind the scenes.&lt;/p&gt;&#xA;" OwnerUserId="19404" LastEditorUserId="19404" LastEditDate="2019-11-12T02:31:42.217" LastActivityDate="2019-11-12T02:31:42.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21163" PostTypeId="2" ParentId="21159" CreationDate="2019-11-12T02:39:02.383" Score="0" Body="&lt;p&gt;If it has a &lt;code&gt;.desktop&lt;/code&gt; launcher in &lt;code&gt;/usr/share/applications&lt;/code&gt; and has &lt;code&gt;%F&lt;/code&gt; after the exec command like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Text Editor&#xA;Comment=Edit text files&#xA;Exec=gedit %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You should be able to choose it as a default application in the file manager, not sure about the default applications part, it should be there too but I'm not sure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edited: Had the wrong character to add.&lt;/p&gt;&#xA;" OwnerUserId="19404" LastEditorUserId="19360" LastEditDate="2020-01-01T05:52:28.820" LastActivityDate="2020-01-01T05:52:28.820" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21164" PostTypeId="1" AcceptedAnswerId="21274" CreationDate="2019-11-12T06:16:45.083" Score="1" ViewCount="98" Body="&lt;p&gt;I have an ASUS A455LB laptop, recently i replaced the battery bcs it broke. But after i replaced it with new battery, and run on Battery Mode, my laptop suddenly shut down completely.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The battery indicator says it still got 75% battery left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I turn on my laptop again, it shuts down again on the elementary OS logo screen..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop runs fine on AC mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the system that i used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gUHQ6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gUHQ6.png&quot; alt=&quot;System Desc&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the details about the battery &#xA;&lt;a href=&quot;https://i.stack.imgur.com/AofK7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AofK7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help me with this problem? Thanks..&lt;/p&gt;&#xA;" OwnerUserId="19436" LastActivityDate="2019-11-25T09:40:45.187" Title="My Laptop suddenly shuts down when the battery is on 75%" Tags="|battery|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21165" PostTypeId="1" AcceptedAnswerId="21166" CreationDate="2019-11-12T06:59:05.393" Score="1" ViewCount="1542" Body="&lt;p&gt;Everything I open will open in this cretain of a browser called Epiphany. Discord, Thunderbird, etc.. all Links open a new instance or tab in Epiphany. I do want to open everything only in Firefox. I can't be the only one. How to mitigate this issue?&lt;/p&gt;&#xA;" OwnerDisplayName="user18887" LastActivityDate="2021-01-26T13:17:47.383" Title="How To change default Browser?" Tags="|web-browser|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21166" PostTypeId="2" ParentId="21165" CreationDate="2019-11-12T07:49:26.687" Score="4" Body="&lt;p&gt;Go to &lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Applications&lt;/code&gt; &gt; &lt;code&gt;Default&lt;/code&gt; Tab. There you can set your default web browser, email client, text editor etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wkIOB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wkIOB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="19360" LastEditDate="2020-01-01T05:55:47.883" LastActivityDate="2020-01-01T05:55:47.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21167" PostTypeId="2" ParentId="21159" CreationDate="2019-11-12T08:01:24.503" Score="1" Body="&lt;p&gt;To appear in Music Player dropdown in 'Default Applications' list, your app's &lt;code&gt;.desktop&lt;/code&gt; file (the one in &lt;code&gt;/usr/share/applications&lt;/code&gt;) should contain &lt;code&gt;Categories=Audio;Music;Player;&lt;/code&gt; line. If it doesn't contain this line, try adding it manually and see if the app will appear in the &lt;code&gt;Music Player&lt;/code&gt; dropdown.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-11-12T08:01:24.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21168" PostTypeId="1" CreationDate="2019-11-12T18:44:18.893" Score="1" ViewCount="67" Body="&lt;p&gt;I'm running Juno with dual monitor and Nvidia gtx card. Every time I lock pc it lowers the resolution(I would say 1024x from 1920x) for lock screen but when I login from the boot it showing correct resolution the only problem is with the lock screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it's not a big deal but it's kind annoying.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastEditorUserId="15904" LastEditDate="2019-11-17T13:01:46.927" LastActivityDate="2019-11-17T13:01:46.927" Title="Lockscreen Resolution issue Juno" Tags="|release-juno|greeter|resolution|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21169" PostTypeId="2" ParentId="21146" CreationDate="2019-11-12T19:16:28.843" Score="0" Body="&lt;p&gt;I resolved this problem with deleting efi folder, try this if nomodeset is not working&lt;/p&gt;&#xA;" OwnerUserId="19417" LastEditorUserId="19417" LastEditDate="2019-11-12T19:21:52.187" LastActivityDate="2019-11-12T19:21:52.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21170" PostTypeId="2" ParentId="21161" CreationDate="2019-11-12T19:47:07.020" Score="2" Body="&lt;p&gt;It's known bug:&#xA;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/issues/89&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-power/issues/89&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try this workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2019-11-12T19:47:07.020" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21172" PostTypeId="1" AcceptedAnswerId="21187" CreationDate="2019-11-13T01:03:17.937" Score="1" ViewCount="289" Body="&lt;p&gt;The networking icon only has options for wired, and is missing a wireless option. The rtl8812au-dkms driver is identified by the AppCentre. I've tried multiple troubleshooting tips from other similar scenarios, but had no luck so far. The usb wifi stick works perfectly fine when elementary is running from a live usb, but as soon as the OS is installed it stops working. I have secure boot off in my bios.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are some commands and their outputs which I hope will help in diagnosing this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;lsusb&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 001 Device 010: ID 0bda:8812 Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac WLAN Adapter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dkms status rtl8812au&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rtl8812au, 4.3.8.12175.20140902+dfsg, 4.15.0-65-generic, x86_64: installed&#xA;rtl8812au, 4.3.8.12175.20140902+dfsg, 4.15.0-69-generic, x86_64: installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;iwconfig&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lo        no wireless extensions.&#xA;&#xA;enp0s31f6  no wireless extensions.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list all&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;0: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So if my (limited) understanding is correct, the usb stick is detected fine and the drivers are installed, but the networking capabilities aren't available? I'm happy to edit with any more outputs that would be helpful. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="19442" LastActivityDate="2019-11-14T08:05:18.710" Title="Wifi not available on Juno using rtl8812au driver and usb wifi stick" Tags="|networking|drivers|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21176" PostTypeId="2" ParentId="20856" CreationDate="2019-11-13T06:59:09.023" Score="1" Body="&lt;p&gt;Elementary OS is Ubuntu 18.04 with a different desktop environment(Pantheon) and custom applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install Ubuntu Server on ARM devices and then install the Elementary/Pantheon packages via the PPA. It has ARM builds from what I can tell. If it works as easily as it does on x86 hardware it should be pretty simple, although everything takes much longer on a Pi or something with similar processing power, and it may have issues. Theoretically it's simple though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntu.com/download/server/arm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntu.com/download/server/arm&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntu.com/download/iot/raspberry-pi&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntu.com/download/iot/raspberry-pi&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.techrepublic.com/article/how-to-install-the-pantheon-desktop-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.techrepublic.com/article/how-to-install-the-pantheon-desktop-on-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/stable/+packages&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19404" LastEditorUserId="19404" LastEditDate="2019-11-13T07:31:06.027" LastActivityDate="2019-11-13T07:31:06.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21177" PostTypeId="1" CreationDate="2019-11-13T10:27:09.610" Score="1" ViewCount="31" Body="&lt;p&gt;I am new to elementary os and I can't find the &quot;language and region&quot; in my settings menu. Please Help!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OS:&#xA;elementary OS 5.0 Juno&#xA;Built on Ubuntu 18.04.2 LTS&#xA;Linux 4.15.0-69-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lxmKG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lxmKG.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19449" LastActivityDate="2019-11-13T10:27:09.610" Title="&quot;Language and Region&quot; disappears in settings menu" Tags="|elementary-website|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21178" PostTypeId="2" ParentId="21147" CreationDate="2019-11-13T11:41:08.183" Score="3" Body="&lt;p&gt;I love elementary OS, and use it my self (and have) for a long time now. However, I would not recommend it for this endeavor. I'd go with something that is highly customizable (and meant to be customized) like Kubuntu, Xubuntu, etc. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either way, there's a package called &lt;a href=&quot;https://www.noobslab.com/2018/08/macbuntu-1804-transformation-pack-ready.html?m=1&quot; rel=&quot;nofollow noreferrer&quot;&gt;MacBuntu&lt;/a&gt;&#xA;Which will give you a Mac OS X theme and icon theme. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And something called &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary tweaks&lt;/a&gt;&#xA;Which will allow you to edit a lot of things regarding visual behaviour (including choosing the new theme and icon theme)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Id recommend trying using it as it is for a while though, it can take some getting used to, but it does have a really great design and incredible usability.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastActivityDate="2019-11-13T11:41:08.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21182" PostTypeId="1" AcceptedAnswerId="21186" CreationDate="2019-11-14T02:14:42.110" Score="1" ViewCount="113" Body="&lt;p&gt;I am new to eOS and I want to change from Windows to eOS. Therefore I trying this distro for a week now and change everything to guaranty my usual workflow.&#xA;Everything is working as expected for now and I found apps for all my tasks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing which is quite hard for me are the shortcuts for eOS.&#xA;Can I change the shortcuts of eOS to more Windows like behavior?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;fe in Files -&gt; backspace to go back&#xA;also the function keys are not working and I cannot assign only one key for any function&lt;/p&gt;&#xA;&#xA;&lt;p&gt;is there any additional tool or a config file for this changes ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every help is very much appreciated&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2019-11-15T10:56:39.770" Title="Windows based shortsuts" Tags="|pantheon-files|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21183" PostTypeId="2" ParentId="21005" CreationDate="2019-11-14T02:21:20.113" Score="0" Body="&lt;p&gt;It is no working for me either. &#xA;Also the webDAV API is not working for external calendars.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed minetime which is fitting the design quite well and you have also some additional handy features.&lt;/p&gt;&#xA;" OwnerUserId="19451" LastEditorUserId="16827" LastEditDate="2019-11-17T13:19:25.473" LastActivityDate="2019-11-17T13:19:25.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21184" PostTypeId="2" ParentId="10048" CreationDate="2019-11-14T02:23:38.730" Score="0" Body="&lt;p&gt;authorize less secure apps is not working for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using minetime a couple of days and this app is working fine for me with all my external calendars&lt;/p&gt;&#xA;" OwnerUserId="19451" LastEditorUserId="16827" LastEditDate="2019-11-17T13:21:51.957" LastActivityDate="2019-11-17T13:21:51.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21185" PostTypeId="1" AcceptedAnswerId="21198" CreationDate="2019-11-14T06:31:43.007" Score="1" ViewCount="75" Body="&lt;p&gt;Today I installed LibreOffice Impress from the AppCentre but the app will not start. The app icon appears in the Dock for 10s and then disappears. I have added the System Log below. My system is up to date via the AppCentre. I am new to Linux and don't know where to start to fix the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone help? &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/var/log/syslog&#xA;Nov 14 14:09:03 dean-ultrabook wingpanel[2205]: RelevancyService.vala:166: Pushing launch event: application://libreoffice-impress.desktop [LibreOffice Impress]&#xA;Nov 14 14:09:03 dean-ultrabook zeitgeist-fts[3814]: Unable to get info on application://synapse.desktop&#xA;Nov 14 14:09:03 dean-ultrabook kernel: [ 2913.073804] audit: type=1400 audit(1573711743.102:80): apparmor=&quot;ALLOWED&quot; operation=&quot;connect&quot; profile=&quot;libreoffice-oopslash&quot; name=&quot;/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad3bf2177ef89cc213583fd6c49f3f5&quot; pid=26153 comm=&quot;oosplash&quot; requested_mask=&quot;wr&quot; denied_mask=&quot;wr&quot; fsuid=1000 ouid=1000&#xA;Nov 14 14:09:03 dean-ultrabook kernel: [ 2913.073810] audit: type=1400 audit(1573711743.102:81): apparmor=&quot;ALLOWED&quot; operation=&quot;file_perm&quot; profile=&quot;libreoffice-oopslash&quot; name=&quot;/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad3bf2177ef89cc213583fd6c49f3f5&quot; pid=26153 comm=&quot;oosplash&quot; requested_mask=&quot;r&quot; denied_mask=&quot;r&quot; fsuid=1000 ouid=1000&#xA;Nov 14 14:09:03 dean-ultrabook kernel: [ 2913.073813] audit: type=1400 audit(1573711743.102:82): apparmor=&quot;ALLOWED&quot; operation=&quot;file_perm&quot; profile=&quot;libreoffice-oopslash&quot; name=&quot;/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad3bf2177ef89cc213583fd6c49f3f5&quot; pid=26153 comm=&quot;oosplash&quot; requested_mask=&quot;r&quot; denied_mask=&quot;r&quot; fsuid=1000 ouid=1000&#xA;Nov 14 14:09:03 dean-ultrabook kernel: [ 2913.074189] audit: type=1400 audit(1573711743.102:83): apparmor=&quot;ALLOWED&quot; operation=&quot;file_perm&quot; profile=&quot;libreoffice-oopslash&quot; name=&quot;/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad3bf2177ef89cc213583fd6c49f3f5&quot; pid=26153 comm=&quot;oosplash&quot; requested_mask=&quot;w&quot; denied_mask=&quot;w&quot; fsuid=1000 ouid=1000&#xA;Nov 14 14:09:03 dean-ultrabook kernel: [ 2913.074194] audit: type=1400 audit(1573711743.102:84): apparmor=&quot;ALLOWED&quot; operation=&quot;file_perm&quot; profile=&quot;libreoffice-oopslash&quot; name=&quot;/tmp/OSL_PIPE_1000_SingleOfficeIPC_ad3bf2177ef89cc213583fd6c49f3f5&quot; pid=26153 comm=&quot;oosplash&quot; requested_mask=&quot;w&quot; denied_mask=&quot;w&quot; fsuid=1000 ouid=1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19452" LastActivityDate="2019-11-15T07:24:55.040" Title="I cannot get LibreOffice Impress to start" Tags="|software-installation|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21186" PostTypeId="2" ParentId="21182" CreationDate="2019-11-14T06:53:27.353" Score="1" Body="&lt;p&gt;The 'philosophy' of keyboard shortcuts of the elementary OS is quite different than the other OS, including Mac OS and Windows. You can change safely some of them using System Settings app &gt; Keyboars &gt; Shortcuts, also you can do this by using dconf editor, but if you are not experienced as it looks using dconf can cause you much more troubles than any achievements. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;By using alt+arrow keys you can move backwards and forwards into your file navigaion history(alt + left and right arrows),folder above and inside(alt + up and down arrows) into your current file location.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-14T06:53:27.353" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21187" PostTypeId="2" ParentId="21172" CreationDate="2019-11-14T08:05:18.710" Score="0" Body="&lt;p&gt;Compiled from comments: The instructions on &lt;a href=&quot;https://www.learningpenguin.net/2018/01/30/install-realtek-rtl8812au-wifi-driver-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to install Realtek rtl8812au WiFi Driver in Linux&lt;/a&gt; seem to work for this wifi device. The article refers to a &lt;a href=&quot;https://github.com/AstroDrabb/rtl8812au&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub repo&lt;/a&gt; containing a version of the rtl8812au linux driver, updated to compile against newer kernels. Since there is a huge list of USB WiFi adapters built using this chip, we can expect a flow of requests regarding installing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a summary:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/AstroDrabb/rtl8812au&#xA;cd rtl8812au&#xA;sudo ./install.sh&#xA;**follow the script's instructions**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above repository also contains instructions on adding the driver to dkms, so that it survives kernel update.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-14T08:05:18.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21188" PostTypeId="1" AcceptedAnswerId="21190" CreationDate="2019-11-14T08:52:57.720" Score="3" ViewCount="183" Body="&lt;p&gt;I use Code a lot, and I know that restoring apps' state is a core elementary OS design principle. But I find myself bugged by the fact that every time I open Code I am presented with a huge list of tabs containing all the files I've previously opened. Any other new file I open just gets added to the list of tabs, and I often find myself having to close a huge number of tabs. Take a look at the tabs bar in the below image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/63Kuc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/63Kuc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to configure Code to not restore the previously opened files?&#xA;I used dconf-editor to explore Code's gsettings, but any change there is overwritten. I've also added Code to the &lt;em&gt;Do not collect data for the following:&lt;/em&gt; apps list under the &lt;em&gt;Security and Privacy&lt;/em&gt; Settings plug, all without any effect on Code's behavior.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-14T14:21:32.677" Title="Configure Code to forget opened files" Tags="|code|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21190" PostTypeId="2" ParentId="21188" CreationDate="2019-11-14T14:21:32.677" Score="2" Body="&lt;p&gt;Unfortunately I don't believe this is possible currently, Code calls restore_opened_documents in the activate function whenever there is no currently opened window without checking any gsettings key that would give an option. However there is a pull request to Code (&lt;a href=&quot;https://github.com/elementary/code/pull/612&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/pull/612&lt;/a&gt;) that would change it to respect the privacy settings, I expect a future update will bring this functionality.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2019-11-14T14:21:32.677" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21192" PostTypeId="1" CreationDate="2019-11-14T17:41:42.437" Score="1" ViewCount="209" Body="&lt;p&gt;I am pretty new to the Linux Environment and the first Distro I wanted to try was the Elementary OS, so far it's been amazing experience. So it's been a week I am using Elementary OS and all of a sudden my numeric keypad stopped working (Right Numeric keypad) however the numeric keypad that is below the function keys is working just fine(Relief). Interestingly, the right number keypad stopped working after I log in to my system. My password contains some numbers and it does work in the password field, but once logged in it stopped working. Anyone has any solution to this problem? I really want to explore more of this however this lil problems limit me. Thanks in advance :)&lt;/p&gt;&#xA;" OwnerUserId="19457" LastActivityDate="2019-11-14T17:41:42.437" Title="Right Numeric keypad stopped working on Elementary OS" Tags="|keyboard|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21194" PostTypeId="1" CreationDate="2019-11-14T20:33:53.947" Score="1" ViewCount="507" Body="&lt;p&gt;can I somehow change the icon image of a folder to a custom one ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/odRxC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/odRxC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to change it for pCloud, Dropbox, etc... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue ?&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2023-11-26T00:07:00.890" Title="change icon to custom in Files" Tags="|pantheon-files|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21195" PostTypeId="2" ParentId="18289" CreationDate="2019-11-15T03:54:10.867" Score="0" Body="&lt;p&gt;According to the table linked above your MBP appears to have 64 bit HW and EFI but are forced into 32 bit EFI mode in firmware. IIRC the boot images provided above should work with that machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;FWIW, I've used them to install elementary in the past without issue (old iMac).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Give it a shot - will probably work. &lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2019-11-15T03:54:10.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21196" PostTypeId="2" ParentId="21085" CreationDate="2019-11-15T04:01:01.713" Score="1" Body="&lt;p&gt;Yes, you certainly can download a new ISO. You can verify the download using the hash listed here: &lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#creating-an-installation-medium&lt;/a&gt;&#xA;The hash is listed under the section &quot;Creating an Install Drive&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What software did you use to make the USB? I recently created a successful USB drive using Etcher. I've tried Rufus before and it also worked.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2019-11-15T04:01:01.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21197" PostTypeId="2" ParentId="17544" CreationDate="2019-11-15T06:38:33.077" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jjANx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jjANx.png&quot; alt=&quot;Top: Thunderbird; bottom: Firefox with the title bar turned off in the &amp;quot;Customize&amp;quot; menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Top: Thunderbird; bottom: Firefox with the title bar turned off in the &quot;Customize&quot; menu, and the &lt;code&gt;userChrome.css&lt;/code&gt; customizations described below&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The GTK+ theme shown above is &lt;a href=&quot;https://github.com/surajmandalcell/elementary-x&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-x&lt;/a&gt;, but the instructions below also work fine with the default &quot;elementary&quot; theme in Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have used &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tweaks&lt;/a&gt; to set the window controls to use the &quot;OS X&quot; layout because I frequently switch between macOS / elementaryOS environments. If you use the default &quot;elementary&quot; layout, you just won't have a minimize button (the one in the middle), no big deal. Separating the &quot;maximize&quot; button from &quot;close&quot;—so that they're on opposite sides of the window—becomes more of a challenge, so you may want to look at &lt;a href=&quot;https://github.com/Zonnev/elementaryos-firefox-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Zonnev/elementaryos-firefox-theme&lt;/a&gt; instead.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;As of Firefox 72 (Nightly), it's possible to get a pixel-perfect fix by setting &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;toolkit.legacyUserProfileCustomizations.stylesheets&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to &lt;strong&gt;true&lt;/strong&gt; in &lt;a href=&quot;https://support.mozilla.org/en-US/kb/about-config-editor-firefox&quot; rel=&quot;nofollow noreferrer&quot;&gt;about:config&lt;/a&gt;, and then adding some variation of the following CSS to your &lt;a href=&quot;https://www.howtogeek.com/334716/how-to-customize-firefoxs-user-interface-with-userchrome.css/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;userChrome.css&lt;/code&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;@namespace url(&quot;http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul&quot;);&#xA;&#xA;/* h/t: https://support.mozilla.org/en-US/questions/1222872 */&#xA;&#xA;/* first, move the window controls all the way to the left */&#xA;.titlebar-buttonbox-container {&#xA;  -moz-box-ordinal-group: 0 !important;&#xA;}&#xA;&#xA;/* then move the &quot;close&quot; (X) button all the way to the left */&#xA;.titlebar-close {&#xA;  -moz-box-ordinal-group: 0 !important;&#xA;}&#xA;&#xA;/* fix the spacing issue with the &quot;minimize&quot; button (now in the middle) */&#xA;.titlebar-min {&#xA;  margin-left: 6px !important;&#xA;}&#xA;&#xA;/* left spacer is too wide when shown and hidden when maximized;&#xA;   this looks better */&#xA;.titlebar-spacer[type=&quot;pre-tabs&quot;], .titlebar-spacer[type=&quot;post-tabs&quot;] {&#xA;  display: block !important;&#xA;  width: 20px !important;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h3&gt;Caveats&lt;/h3&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;not sure how those pixel values will for you if you have a high-DPI display&lt;/li&gt;&#xA;&lt;li&gt;if you like your window controls to be the default &quot;elementary&quot; style (close on the left, maximize on the right), I'm not sure if you'll be able to separate them using the straightforward CSS above, since they're both in the &lt;code&gt;.titlebar-buttonbox-container&lt;/code&gt; div&lt;/li&gt;&#xA;&lt;li&gt;if your native language is right-to-left, you'll need to adjust the &lt;code&gt;-moz-box-ordinal-group&lt;/code&gt;s accordingly (set them to a big number instead) and possibly play with &lt;code&gt;direction: ltr&lt;/code&gt; / &lt;code&gt;rtl&lt;/code&gt; as described in Reference 2, below&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h3&gt;References&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/17555/13077&quot;&gt;Sebastian's answer&lt;/a&gt;, above&lt;/li&gt;&#xA;&lt;li&gt;&quot;&lt;a href=&quot;https://support.mozilla.org/en-US/questions/1222872&quot; rel=&quot;nofollow noreferrer&quot;&gt;how do I move close,max,min buttons location&lt;/a&gt;&quot; - post on support.mozilla.org&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h3&gt;See also&lt;/h3&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/Zonnev/elementaryos-firefox-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;Zonnev/elementaryos-firefox-theme&lt;/a&gt; - a Firefox theme that tries to look as &quot;native&quot; as possible on elementaryOS&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2019-11-15T07:01:11.520" LastActivityDate="2019-11-15T07:01:11.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21198" PostTypeId="2" ParentId="21185" CreationDate="2019-11-15T07:24:55.040" Score="2" Body="&lt;p&gt;Installing libreoffice-impress standalone seems to not bring all the required packages for it to look properly (and I suppose work properly as well?):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VblEr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VblEr.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I suggest removing LibreOffice Impress, and installing the full LibreOffice bundle.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge libreoffice* -y&#xA;sudo apt install libreoffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the install is done (it might take a while), starting Impress will show a whole new interface:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/utxAI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/utxAI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-15T07:24:55.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21200" PostTypeId="1" CreationDate="2019-11-15T09:34:53.057" Score="1" ViewCount="37" Body="&lt;p&gt;No chance for a second try? &#xA;I've read (now) that a delay is default for security reasons. Does this include removing the greeter completely, leaving a black screen? Is this the intended behavior when wrong passwords are typed?&#xA;Because from &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/595/why-is-there-a-delay-when-i-enter-my-password-incorrectly&quot;&gt;the answers to this question&lt;/a&gt; I (maybe mistankenly) had the impression  that the greeter remains there, but will not take inputs for the duration of the set delay.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-11-15T09:34:53.057" Title="Pantheon greeter disappears when I mistype my password" Tags="|greeter|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21201" PostTypeId="2" ParentId="21182" CreationDate="2019-11-15T10:56:39.770" Score="0" Body="&lt;p&gt;Thanks for being willing to try something new for and trying eOS! I do recommend you persevere with learning the new shortcuts where they differ from your old OS (although I understand that when you are using both OS's it may be a little confusing at first). They will quickly become second nature. If there is a function for which eOS does not currently provide any shortcut please feel free to raise an issue on for the appropriate project.  For Files that would be at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As the previous answer states, you can add or change some shortcuts via the Settings panel, but not those that are internal to a specific application (that can only be done by raising an issue persuading the developers to amend the code).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-11-15T10:56:39.770" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21202" PostTypeId="2" ParentId="21005" CreationDate="2019-11-15T15:21:24.003" Score="4" Body="&lt;p&gt;The right answer depends on if you use &lt;strong&gt;2-factor authentication&lt;/strong&gt; (2FA) or not.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;With 2FA&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;You have to create a &lt;strong&gt;per-app password&lt;/strong&gt; in your Google account &lt;a href=&quot;https://myaccount.google.com/apppasswords&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Afterwords you will be able to login using that single-use password with your account.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Without 2FA&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;In this case I think you have to tell Google to &lt;strong&gt;trust less-secure apps&lt;/strong&gt; in your Google account &lt;a href=&quot;https://www.google.com/settings/security/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;settings&lt;/a&gt; (it just means they use standard authentication methods instead of Google-made methods). I cannot confirm this works as I no longer have any account without 2FA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps :)&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2019-11-15T15:49:14.843" LastActivityDate="2019-11-15T15:49:14.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21203" PostTypeId="1" AcceptedAnswerId="21207" CreationDate="2019-11-15T21:01:40.803" Score="0" ViewCount="1268" Body="&lt;p&gt;as mentioned in a previous post I am testing elementary os in a VM for a couple of days now to test if I can leave Windows... hopefully forever :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there are some small points which I already mentioned when it comes to eOS itself but other than that the distro is running perfect and I found applications for every purpase. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some things I cannot test with my VM. Especially when it comes to hardware compaptility. I want to go for a Lenovo Thinkpad x1 carbon 7th generation and I want to know if anyone here has experience with this laptop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;things which are important to me:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;touchpad support with gestures (I already went throw a thread where I can install some libraries and also a GUI for configuring gestures, not sure where I have the link)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;fn keys support for music control etc.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;and generall hardware support for Lenovo and the specific laptop.&#xA;the other model will be a new XPS13 in case of any issues with the x1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;every input is very welcome :)&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2019-11-16T08:46:29.927" Title="experience with eOS and Lenovo Thinkpad x1 carbon" Tags="|hardware|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21206" PostTypeId="2" ParentId="21113" CreationDate="2019-11-16T08:42:15.870" Score="0" Body="&lt;p&gt;Same issue here, adding to this with more info;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Confirmed:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sideloader is installed&lt;/li&gt;&#xA;&lt;li&gt;old flathub ppa removed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I'm able to install a flatpak via terminal.&#xA;This allows the app to be displayed in applications&#xA;Once installed it can be launched from applications but the application fails to run and just sits in the dock &gt; after clicking the app in the dock it disappears.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;launching from terminal:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo flatpak run org.libreoffice.LibreOffice&#xA;Gtk-Message: 19:31:53.802: Failed to load module &quot;canberra-gtk-module&quot;&#xA;Gtk-Message: 19:31:53.802: Failed to load module &quot;canberra-gtk-module&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;same with any other flatpck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a side note AppCentre isn't showing any flatpak apps, performing a cross check between a listed app in AppCentre and the app in flathub there are version number differences so its not the same app as in flathub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;checking many other apps in AppCentre none of them show the drop down to allow to be installed from flathub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there may be an underlying issue connecting installing flatpak's and not seeing any in the AppCentre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Additionally&lt;/strong&gt; to the above ive installed &quot;Discover&quot; flatpak management from the AppCentre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Attempted to install the same version of LibreOffice 6.3.3 from flathub, this has installed and is working successfully.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using discovery works, logically there must be an issue with AppCentre and Flathub working cohesively together.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope the additional information helps.&lt;/p&gt;&#xA;" OwnerUserId="18833" LastEditorUserId="18833" LastEditDate="2019-11-16T09:29:14.403" LastActivityDate="2019-11-16T09:29:14.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21207" PostTypeId="2" ParentId="21203" CreationDate="2019-11-16T08:46:29.927" Score="0" Body="&lt;p&gt;That's a nice machine, and you'll be glad to know that it is &lt;a href=&quot;https://certification.ubuntu.com/hardware/201904-26993&quot; rel=&quot;nofollow noreferrer&quot;&gt;certified to run Ubuntu 18.04&lt;/a&gt;. Since elementary OS Juno is based on Ubuntu, I foresee no issues in installing it. You might need a kernel update though, but there are also reports that it works just fine with elementary OS current kernel (4.15). &lt;a href=&quot;https://thornelabs.net/posts/installing-ubuntu-1804-lts-on-a-lenovo-thinkpad-x1-carbon-gen-6.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;This report&lt;/a&gt; also lists the recommended BIOS setup needed to enable various features, and a list of possible issues you might encounter. &lt;a href=&quot;https://forums.lenovo.com/t5/Other-Linux-Discussions/Lenovo-X1-Carbon-7th-Gen-Issues-with-trackpad-and-sleep/td-p/4496012&quot; rel=&quot;nofollow noreferrer&quot;&gt;This Lenovo forum thread&lt;/a&gt; has comprehensive details on how to solve those issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A good start would be to &lt;a href=&quot;https://www.lifewire.com/create-elementary-os-live-usb-drive-2202054&quot; rel=&quot;nofollow noreferrer&quot;&gt;create an elementary OS USB drive&lt;/a&gt;, and trying it live, without installing. Until elementary OS 5.1 is released, after the installation completes, you could try running &lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&lt;/code&gt; &lt;a href=&quot;https://blog.elementary.io/updates-for-august-2019/&quot; rel=&quot;nofollow noreferrer&quot;&gt;to bump up the kernel to 5.0 and to bring improved hardware support&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the touchpad gestures, I can recommend &lt;a href=&quot;https://dev.to/iberianpig/how-to-install-and-customize-fusuma-73l&quot; rel=&quot;nofollow noreferrer&quot;&gt;installing fusuma&lt;/a&gt;. It works great, but it does not have a GUI configuration tool.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a rule of thumb, almost any Ubuntu 18.04 functionality tutorial/wiki (except the UI/UX) will also work for elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-16T08:46:29.927" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21209" PostTypeId="1" CreationDate="2019-11-16T10:16:26.340" Score="1" ViewCount="257" Body="&lt;p&gt;I'm having some trouble with one of my network adapters being extremely slow. I've bought another adapter, got that plugged in and everything was working perfectly. But now the old adapter keeps stealing all the limelight, connecting to my wifi and being a general pain. Is there a way for me to disable a specific wifi adapter?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; *-network                 &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: enp3s0&#xA;       version: 0c&#xA;       serial: 1c:83:41:00:6d:10&#xA;       size: 10Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=MII speed=10Mbit/s&#xA;       resources: irq:18 ioport:d000(size=256) memory:f7200000-f7200fff memory:f2100000-f2103fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: RTL8723BE PCIe Wireless Network Adapter&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:04:00.0&#xA;       logical name: wlp4s0&#xA;       version: 00&#xA;       serial: 34:68:95:a3:01:71&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rtl8723be driverversion=4.15.0-70-generic firmware=N/A ip=192.168.0.7 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:17 ioport:c000(size=256) memory:f7100000-f7103fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       physical id: 2&#xA;       bus info: usb@1:1.2&#xA;       logical name: wlx78d38d12ad2e&#xA;       serial: 78:d3:8d:12:ad:2e&#xA;       capabilities: ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rt2800usb driverversion=4.15.0-70-generic firmware=0.36 ip=192.168.0.24 link=yes multicast=yes wireless=IEEE 802.11&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The offending adapter is  RTL8723BE PCIe Wireless Network Adapter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="19473" LastEditorUserId="9445" LastEditDate="2019-11-17T13:02:09.970" LastActivityDate="2019-11-17T13:02:09.970" Title="How do I disable one of my network adapters?" Tags="|wifi|networking|hardware|internet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21211" PostTypeId="2" ParentId="21209" CreationDate="2019-11-16T13:05:45.120" Score="1" Body="&lt;p&gt;Click on the network indicador and then click on Network settings (or the closest to this - I'm running eOS in pt_BR). It'll open the network settings screen. Each network device shows a toggle on the top-right. Flipping this toggle will enable/disable the device.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HzBMR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HzBMR.png&quot; alt=&quot;Network settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9774" LastActivityDate="2019-11-16T13:05:45.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21212" PostTypeId="2" ParentId="21209" CreationDate="2019-11-16T13:42:16.973" Score="2" Body="&lt;p&gt;The first thing I would try, if you have a laptop, is to disable the integrated (and faulty) network adapter from the BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the above solution is not applicable, try to temporarily disable the network interface, use it's logical name with ip:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ip link set wlp4s0 down&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If this works, to make the change permanent, you'll have to run this command at startup. So, create a new .service file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/systemd/system/disable-wlp4s0.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Paste the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Disable Bad Wireless Device&#xA;After=sysinit.target&#xA;StartLimitIntervalSec=0&#xA;&#xA;[Service]&#xA;Type=simple&#xA;Restart=no&#xA;RemainAfterExit=yes&#xA;User=root&#xA;ExecStart=/sbin/ip link set wlp4s0 down&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;Ctrl+O&lt;/code&gt; to save the file and &lt;code&gt;Ctrl+X&lt;/code&gt; to exist nano editor.&#xA;Next, enable the new service file, so that it runs at startup:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo systemctl enable disable-wlp4s0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Other useful commands are:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl start disable-wlp4s0&lt;/code&gt; to start the service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl stop disable-wlp4s0&lt;/code&gt; to stop the service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo systemctl status disable-wlp4s0&lt;/code&gt; to see details about the service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another solution would be to &lt;a href=&quot;https://superuser.com/questions/331720/how-do-i-set-the-priority-of-network-connections-in-ubuntu&quot;&gt;change the priority of the network interfaces&lt;/a&gt;, instead of disabling one of them. The card with the smallest metric has the highest priority.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-16T13:42:16.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21214" PostTypeId="2" ParentId="21194" CreationDate="2019-11-16T16:58:07.940" Score="1" Body="&lt;p&gt;I am afraid this is not possible at the moment.  The icon displayed for files is determined by either their mime-type or, for executables, by any associated .desktop-file.  The only exception is where the folder path matches one of the GUserDirectory enumeration - i.e. Home, Documents, Music, Video etc.  This is hardcoded.  In principle additional &quot;special directories&quot; with custom icons could be catered for (although not straightforward, especially providing a reasonable UX). An issue has been outstanding at &lt;a href=&quot;https://github.com/elementary/files/issues/171&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/171&lt;/a&gt; for some time.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-11-16T16:58:07.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21215" PostTypeId="1" CreationDate="2019-11-16T21:04:01.377" Score="0" ViewCount="106" Body="&lt;p&gt;I have my system running Juno with the 5.3.11 Kernel, with a Ryzen 7 1700 set in the UEFI to 3.9 GHz, but I've noticed the cpu doesn't go above 1.550 GHz, even while rendering with Blender.&#xA;Entering &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;watch -n1 &quot;lscpu | grep 'MHz' | awk '{print $1}'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In the terminal gives me something like this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;CPU MHz:             1374.089&#xA;CPU max MHz:         3900,0000&#xA;CPU min MHz:         1550,0000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The CPU frequency goes below the minimum and never above it.&#xA;Some animations have also been sluggish, so this issue might explain that.&#xA;How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the results for &lt;code&gt;lscpu&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Architecture:        x86_64&#xA;CPU op-mode(s):      32-bit, 64-bit&#xA;Byte Order:          Little Endian&#xA;CPU(s):              16&#xA;On-line CPU(s) list: 0-15&#xA;Thread(s) per core:  2&#xA;Core(s) per socket:  8&#xA;Socket(s):           1&#xA;NUMA node(s):        1&#xA;Vendor ID:           AuthenticAMD&#xA;CPU family:          23&#xA;Model:               1&#xA;Model name:          AMD Ryzen 7 1700 Eight-Core Processor&#xA;Stepping:            1&#xA;CPU MHz:             1356.654&#xA;CPU max MHz:         3900,0000&#xA;CPU min MHz:         1550,0000&#xA;BogoMIPS:            7784.61&#xA;Virtualization:      AMD-V&#xA;L1d cache:           32K&#xA;L1i cache:           64K&#xA;L2 cache:            512K&#xA;L3 cache:            8192K&#xA;NUMA node0 CPU(s):   0-15&#xA;Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;lsmod | grep amd&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;edac_mce_amd           32768  0&#xA;kvm_amd                98304  0&#xA;kvm                   651264  1 kvm_amd&#xA;ccp                    94208  1 kvm_amd&#xA;amdgpu               4194304  13&#xA;amd_iommu_v2           20480  1 amdgpu&#xA;gpu_sched              32768  1 amdgpu&#xA;ttm                   106496  1 amdgpu&#xA;drm_kms_helper        184320  1 amdgpu&#xA;drm                   491520  7 gpu_sched,drm_kms_helper,amdgpu,ttm&#xA;i2c_algo_bit           16384  2 igb,amdgpu&#xA;gpio_amdpt             20480  0&#xA;gpio_generic           20480  1 gpio_amdpt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19184" LastEditorUserId="19184" LastEditDate="2019-11-18T12:39:29.093" LastActivityDate="2019-11-18T12:39:29.093" Title="CPU frequency stuck at 1.550 GHz" Tags="|release-juno|system|amd|cpu|" AnswerCount="0" CommentCount="15" ContentLicense="CC BY-SA 4.0" />
  <row Id="21216" PostTypeId="1" CreationDate="2019-11-17T01:24:21.373" Score="0" ViewCount="275" Body="&lt;p&gt;I have install Elementary OS 5 Juno and i notice that wifi signal very weak even though still can connect to it and use it like normal. But sometime it will affect my work due to unstable signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried to disable power management but it won't help much on getting better wifi signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any solution to this? &lt;/p&gt;&#xA;" OwnerUserId="19480" LastActivityDate="2019-11-17T08:05:18.160" Title="Wifi signal weak Intel Dual Band Wireless-AC 3168NGW" Tags="|release-juno|wifi|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21217" PostTypeId="2" ParentId="21216" CreationDate="2019-11-17T08:05:18.160" Score="1" Body="&lt;p&gt;It is worth trying the solution described &lt;a href=&quot;https://www.youtube.com/watch?v=ls3sE64Ril8&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. The video also shows a way of measuring the speed from Terminal, using speedtest. So, install and run speedtest to see the down/up speed before applying the solution:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install speedtest-cli &amp;amp;&amp;amp; speedtest&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now, in Terminal paste the following commands, one after the other:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo &quot;options iwlwifi 11n_disable=1&quot; | sudo tee /etc/modprobe.d/iwlwifi.conf&#xA;sudo modprobe -rfv iwlmvm&#xA;sudo modprobe -rfv iwlwifi&#xA;sudo modprobe -v iwlwifi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run &lt;code&gt;speedtest&lt;/code&gt; again and compare the results.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-17T08:05:18.160" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21218" PostTypeId="2" ParentId="21152" CreationDate="2019-11-17T09:14:54.930" Score="0" Body="&lt;p&gt;A simple (but not secure) solution:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;em&gt;Each&lt;/em&gt; user must change the access rights to their personal Public folder (~/Public) to 777.  In Files open the Properties dialog and choose the permissions tab.  Click on the &quot;Write&quot; buttons for &quot;group&quot; and &quot;everyone&quot;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Once this is done you can create a link to another user's Public folder in your own home directory (or anywhere you can write to) by either&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;dragging and dropping that folder with the secondary (right) button or&lt;/li&gt;&#xA;&lt;li&gt;using &quot;Copy as Link&quot; and &quot;Paste&quot; context menu options.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Another solution is to open a Files window as Administrator (right-click on dock icon) then create a global Public folder in e.g. /opt.  Change the permissions to 777 as before.  Then each user can create their own link to that folder in their home directory.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-11-17T09:14:54.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21221" PostTypeId="1" AcceptedAnswerId="21227" CreationDate="2019-11-17T15:56:27.460" Score="3" ViewCount="582" Body="&lt;p&gt;I'm trying to save a OpenConnect vpn in the network settings, however i'm only prompted with two types (OpenVPN and Point-to-Point Tunneling Protocol PPTP) even 'tough i've installed OpenConnect and connected from the terminal many times.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3gSUF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3gSUF.png&quot; alt=&quot;OpenVPN and Point-to-Point Tunneling Protocol PPTP options&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I add the option in the Network Manager so I can save this VPN?&lt;/p&gt;&#xA;" OwnerUserId="19485" LastEditorUserId="16827" LastEditDate="2019-11-18T17:06:19.083" LastActivityDate="2019-11-19T08:36:46.100" Title="Add VPN type to Network configurations" Tags="|release-juno|networking|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21224" PostTypeId="2" ParentId="21122" CreationDate="2019-11-18T07:19:25.843" Score="1" Body="&lt;p&gt;I am here for share my experience with &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryOS&lt;/a&gt;. I am installed the elementaryOS Juno version in my PC. Everything works fine. it's really fast and stable. I think it's better than &lt;a href=&quot;https://ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu&lt;/a&gt; OS for &lt;a href=&quot;https://flutter.dev/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flutter&lt;/a&gt; development. Sometimes bluetooth devices is not paired. This is the only problem i am facing in elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="17743" LastActivityDate="2019-11-18T07:19:25.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21225" PostTypeId="1" CreationDate="2019-11-18T16:17:07.963" Score="0" ViewCount="89" Body="&lt;p&gt;elementary 5 checksum not matched on download. Tried download twice. Tried different apps, still same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both downloads share the same checksum when checked, only its not the one stated on elementary website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help guys?&lt;/p&gt;&#xA;" OwnerUserId="19490" LastEditorUserId="16827" LastEditDate="2019-11-18T17:05:40.510" LastActivityDate="2024-03-28T19:04:10.500" Title="Checksum not matching" Tags="|elementary-website|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="21227" PostTypeId="2" ParentId="21221" CreationDate="2019-11-19T08:36:46.100" Score="2" Body="&lt;p&gt;Try installing the openconnect packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install network-manager-openconnect network-manager-openconnect-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;followed by:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl restart network-manager.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;Choose a VPN Connection Type&lt;/code&gt; dropdown will now contain two new entries:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Cisco AnyConnect Compatible VPN (openconnect)&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Juniper Network Connect (openconnect)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XYIRr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XYIRr.png&quot; alt=&quot;VPN drop-down extra&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;A reboot might be necessary instead of the network-manager restart.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-19T08:36:46.100" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21233" PostTypeId="1" AcceptedAnswerId="21234" CreationDate="2019-11-19T18:06:47.600" Score="0" ViewCount="81" Body="&lt;p&gt;Last night, I update my EOS by using &lt;code&gt;sudo apt-get upgrade&lt;/code&gt;. After that, my boot time is very very slow. Usually take 5 second, now ~1 minutes (I using SSD). In terminal, I run &lt;code&gt;systemd-analyze blame&lt;/code&gt; and this is the result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;         52.435s lvm2-monitor.service&#xA;          6.056s NetworkManager-wait-online.service&#xA;           646ms snapd.service&#xA;           519ms dev-sdb6.device&#xA;           430ms pantheon-parental-controls.service&#xA;           399ms systemd-logind.service&#xA;           346ms dev-disk-by\x2duuid-b0250d61\x2d5041\x2d478b\x2daf87\x2d85a390dcef9c.swap&#xA;           327ms snapd.seeded.service&#xA;           287ms lightdm.service&#xA;           287ms plymouth-quit-wait.service&#xA;           216ms systemd-resolved.service&#xA;           211ms systemd-journal-flush.service&#xA;           192ms NetworkManager.service&#xA;           171ms systemd-timesyncd.service&#xA;           143ms upower.service&#xA;           134ms networkd-dispatcher.service&#xA;           121ms udisks2.service&#xA;           117ms systemd-udevd.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thats lvm2 is crazy, how to fix this? &#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="19304" LastActivityDate="2019-11-19T19:51:17.063" Title="Very Slow Booting After apt-get upgrade" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21234" PostTypeId="2" ParentId="21233" CreationDate="2019-11-19T19:51:17.063" Score="1" Body="&lt;p&gt;If you're not using &lt;a href=&quot;https://askubuntu.com/questions/3596/what-is-lvm-and-what-is-it-used-for&quot;&gt;LVM&lt;/a&gt;, you can try masking the service:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl disable lvm2-monitor.service&#xA;sudo systemctl mask lvm2-monitor.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To determine whether you use LVM partitions, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lvdisplay --verbose&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To undo the disable/mask commands, run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl unmask lvm2-monitor.service&#xA;sudo systemctl enable lvm2-monitor.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OFF TOPIC: If you do not need &lt;a href=&quot;https://askubuntu.com/questions/1018576/what-does-networkmanager-wait-online-service-do&quot;&gt;NetworkManager-wait-online.service&lt;/a&gt;, you can disable and mask it as well. Get those precious seconds back! &lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-19T19:51:17.063" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21235" PostTypeId="2" ParentId="21225" CreationDate="2019-11-20T11:46:52.783" Score="0" Body="&lt;p&gt;Downloading on a different network solved the problem. Not sure what this means with regard the first network I used though.&lt;/p&gt;&#xA;" OwnerUserId="19490" LastActivityDate="2019-11-20T11:46:52.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21236" PostTypeId="1" CreationDate="2019-11-20T12:31:41.113" Score="1" ViewCount="124" Body="&lt;p&gt;I would like to change the time a notification takes to disappear, when I get mails in a row it fills the screen with notifications and it takes too long to disappear, i have to clone each one to make them go away&lt;/p&gt;&#xA;" OwnerUserId="17887" LastActivityDate="2020-04-24T18:05:45.590" Title="is there a way to change the time that notifications take to disappear?" Tags="|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21238" PostTypeId="1" AcceptedAnswerId="21242" CreationDate="2019-11-20T13:16:25.287" Score="2" ViewCount="110" Body="&lt;p&gt;i've install audacity from flatpak source, and this happen...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LtnZn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LtnZn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and install Telegram Desktop from flatpak, and this happen when browse files.. can anyone tell me what wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WATmg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WATmg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2020-02-04T11:04:58.797" LastActivityDate="2020-02-04T11:04:58.797" Title="I don't know what the problem is, but some apps look weird like this [SOLVED]" Tags="|gtk|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21239" PostTypeId="2" ParentId="21236" CreationDate="2019-11-20T13:47:32.957" Score="0" Body="&lt;p&gt;I do not think there is a setting for notifications' duration, but you can disable them on a per-app basis. Go to System Settings -&gt; Notifications -&gt; click Mail in the left pane -&gt; disable Bubbles.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-20T13:47:32.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21240" PostTypeId="1" CreationDate="2019-11-20T15:08:12.757" Score="1" ViewCount="112" Body="&lt;p&gt;So I just switched over from Windows 10 to eOS and I'm absolutely loving it so far, but one thing that's bothering me is the game performance. I play tons of Rocket League and it ran perfectly on Windows on maxed out settings but it barely runs at all on eOS. I am using the native Steam app and I have updated my drivers (I think, I updated them from the AppCentre).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm a Linux noob, so any help or suggestions at all would be greatly appreciated, thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I am running eOS on my desktop PC, my GPU is a GeForce 1050, I have 8GB RAM, my CPU is an Intel quad-core i5-7400 @ 3.00 GHz, and I have a 2TB hard-drive (but will be updating to a 1TB SSD soon)&lt;/p&gt;&#xA;" OwnerUserId="19503" LastEditorUserId="9445" LastEditDate="2019-11-20T16:56:41.917" LastActivityDate="2019-11-21T09:27:31.773" Title="How do I go about improving my game performance on eOS?" Tags="|drivers|nvidia|steam|games|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21241" PostTypeId="2" ParentId="21240" CreationDate="2019-11-20T16:15:23.350" Score="1" Body="&lt;p&gt;The Intel graphics card (integrated in your CPU) is most likely enabled by default instead of the nvidia card. Even after installing the appropriate nvidia drivers, you'll have to tell the OS to switch to the more powerful card before using graphics intensive applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, after installing the nvidia driver (from the AppCenter or by using the &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; command), open the nVidia Settings app and in the Profiles section select nVidia. Type your password and reboot. After the reboot completes (hopefully without encountering the dreaded black-screen), open the nVidia Settings app again and, if all went well, you'd be presented with a whole new interface populated with details related to you nVidia card. This means the driver is successfully installed and loaded, and all that it's left to do now is to run your game and verify the performance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also try disabling the Intel integrated graphics in your computer's BIOS, but the instructions on that are highly dependant on your computer's motherboard.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9615" LastEditDate="2019-11-21T09:27:31.773" LastActivityDate="2019-11-21T09:27:31.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21242" PostTypeId="2" ParentId="21238" CreationDate="2019-11-20T18:06:04.563" Score="2" Body="&lt;p&gt;The problem of the double window I don't understand well the reason why it happens, but it is solved by editing the direct access to the application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command must be included:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GTK_CSD=0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will show you an example of how i edit PlayOnLinux application:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Encoding=UTF-8&#xA;Name=PlayOnLinux&#xA;GenericName=Game&#xA;Comment=PlayOnLinux&#xA;Type=Application&#xA;Exec=env GTK_CSD=0 playonlinux% F&#xA;Icon=playonlinux&#xA;Categories=Game;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is necessary to edit the file as administrator. generally the accesses to the application are in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To open the &quot;files&quot; application as an administrator you must right-click and choose to open as administrator&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/elementary/gala/issues/244&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/244&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second problem seems to be related to the fonts, you could try to get that fonts is the one used by the application and install it. or if the application allows it, you could change the fonts from the configuration of the application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2019-11-20T18:06:04.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21244" PostTypeId="1" CreationDate="2019-11-20T21:03:23.513" Score="2" ViewCount="14887" Body="&lt;p&gt;I am a new eOS user and I can't find a particular application in the store. Do I need to do anything in particular before trying to install directly from .deb file?&lt;/p&gt;&#xA;" OwnerUserId="19505" LastActivityDate="2023-02-16T06:25:45.903" Title="installing a .deb package" Tags="|package|install|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21246" PostTypeId="1" CreationDate="2019-11-20T22:45:55.830" Score="0" ViewCount="64" Body="&lt;p&gt;Hello everyone is this the correct place to get help with elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems the elementary forums is not much help asking any questions there. Not really sure why they would have a forum if there's no one responding to anyone questions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks so much.&lt;/p&gt;&#xA;" OwnerUserId="19428" LastEditorUserId="308" LastEditDate="2019-12-06T16:42:44.697" LastActivityDate="2019-12-06T16:42:44.697" Title="Is StackExchange where we get support for elementary OS?" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21247" PostTypeId="2" ParentId="21244" CreationDate="2019-11-20T23:19:20.890" Score="1" Body="&lt;p&gt;If you're comfortable with the command line, you can use the &lt;code&gt;dpkg&lt;/code&gt; command to install a .deb package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The format would be &lt;code&gt;sudo dpkg -i name_of_package.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then, &lt;code&gt;sudo apt-get install -f&lt;/code&gt;. the &lt;code&gt;dpkg -i&lt;/code&gt; command may leaves the package status in an &quot;unconfigured&quot; state due to missing dependencies.&#xA;&lt;code&gt;sudo apt-get install -f&lt;/code&gt; will try to fix it downloading and installing those dependencies   &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're looking for a graphical install, you can use the Software Center or the Gdebi application. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This website might help you:&#xA;&lt;a href=&quot;https://itsfoss.com/install-deb-files-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/install-deb-files-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="19520" LastEditDate="2019-11-23T03:34:17.327" LastActivityDate="2019-11-23T03:34:17.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21248" PostTypeId="2" ParentId="21244" CreationDate="2019-11-21T07:06:12.887" Score="5" Body="&lt;p&gt;You can give &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;noreferrer&quot;&gt;Eddy&lt;/a&gt; a try if you prefer a nice graphical interface.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-21T07:06:12.887" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21249" PostTypeId="2" ParentId="21246" CreationDate="2019-11-21T08:10:49.590" Score="4" Body="&lt;p&gt;The forum is a third party thing and has no affiliation with the elementary team.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go to &lt;a href=&quot;https://elementary.io/support&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/support&lt;/a&gt; you will see that the place they tell you to go to have frequent questions answered, is here, Ask elementary on Stackexhange.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However: please note that no one is getting paid for providing support here, and as such, this is all volunteers pitching in.&lt;/p&gt;&#xA;" OwnerUserId="9615" LastEditorUserId="9615" LastEditDate="2019-11-21T10:09:11.793" LastActivityDate="2019-11-21T10:09:11.793" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21250" PostTypeId="1" CreationDate="2019-11-21T18:50:19.917" Score="2" ViewCount="215" Body="&lt;p&gt;I hope this finds you well &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently running a dual boot system with linux elementary OS 5.0 Juno and windows 10. However each OS is on a different drive since my laptop has too drives. I also have a Huion graphic tablet and it is the inspiroy  H640p and i tried connecting it to my laptop, however elementary OS didn't even realize that there is a peripheral connected. I tried installing the drivers from &lt;code&gt;digimend-kernel-drivers-master&lt;/code&gt; . I tried both ways as a &lt;code&gt;clone&lt;/code&gt;, &lt;code&gt;make&lt;/code&gt; and &lt;code&gt;install&lt;/code&gt; way and trying the debian package way. No matter what I try to do nothing works out as elementary OS doesn't even acknowledge that there is a connected device. I tried manipulating the configuration yet nothing worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded the required driver for my tablet as it also should be supported. I should have the X.org drivers too as i did some of the commands but non worked. I also have secure boot disabled as their website suggested &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Quad-Core Intel® Core™ i7-8550U CPU @ 1.80GHz&lt;/li&gt;&#xA;&lt;li&gt;Intel Corporation UHD Graphics 620 (rev 07)&lt;/li&gt;&#xA;&lt;li&gt;NVIDIA Corporation GP108M [GeForce MX150] (rev a1)&lt;/li&gt;&#xA;&lt;li&gt;16.3 GB memory&lt;/li&gt;&#xA;&lt;li&gt;78.2 GB storage (SATA SSD) (the boot drive for linux , there is alos another drive for windows)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The website&lt;/strong&gt;: &lt;a href=&quot;https://digimend.github.io/drivers/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://digimend.github.io/drivers/&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please if anyone has a suggestion, I would love to hear it .&lt;br&gt;&#xA;Thank you for reading, I hope you have a great day &lt;/p&gt;&#xA;" OwnerUserId="19516" LastEditorUserId="19360" LastEditDate="2019-12-15T03:11:26.297" LastActivityDate="2019-12-15T03:11:26.297" Title="elementary OS 5.0 Juno graphic tablet support" Tags="|release-juno|elementary-project|tablet|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21253" PostTypeId="1" CreationDate="2019-11-22T16:01:06.423" Score="1" ViewCount="115" Body="&lt;p&gt;I had issues with my screen rotating until I turned off auto rotation but for some reason when I go to my lock screen it is upside down.  I am using a Samsung Chromebook Pro with and Intel CORE m3 processor.&lt;/p&gt;&#xA;" OwnerUserId="19525" LastActivityDate="2021-08-11T13:54:21.903" Title="Why is my lock screen upside down" Tags="|settings|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21255" PostTypeId="1" CreationDate="2019-11-23T08:15:16.447" Score="0" ViewCount="63" Body="&lt;p&gt;i’m a newbie, since i installed EOS just six days ago and i’m not and expert. &#xA;To me Elementary is definitely fine, it suits all my needs, but i m faced with the following PROBLEM: the system randomly freezes when using google chrome and its office extensions- like google docs.&#xA;I don’t know, maybe i’m wrong and its just the touchpad that stops working...but it happens even when i m using a wireless mouse, and by the way the issue occours only while using chrome...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any suggestions to solve the problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an Acer Swift 1 SF113-31-P6YM - Pentium 1.1 GHz - 13.3&quot; - 4 GB RAM &#xA;I have done all the updates; and as you may expect , i installed chrome through the Terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&#xA;Daniel&lt;/p&gt;&#xA;" OwnerUserId="19528" LastActivityDate="2020-04-28T18:04:45.503" Title="System seems to freeze when using chrome and google docs" Tags="|google-chrome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21256" PostTypeId="2" ParentId="16700" CreationDate="2019-11-23T09:15:44.050" Score="0" Body="&lt;p&gt;If you're reading this, the &lt;strong&gt;latest update&lt;/strong&gt; of Elementary OS has solved this issue!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hlFnr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hlFnr.png&quot; alt=&quot;Elementary OS 5.0 Juno&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19529" LastActivityDate="2019-11-23T09:15:44.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21257" PostTypeId="1" CreationDate="2019-11-23T18:55:10.847" Score="4" ViewCount="3328" Body="&lt;p&gt;Can anyone tell me how to change the computer name in elementaryOS, please?&lt;/p&gt;&#xA;" OwnerUserId="19533" LastActivityDate="2019-11-23T19:38:52.793" Title="Change computer name in elementaryOS" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21258" PostTypeId="2" ParentId="21257" CreationDate="2019-11-23T19:38:50.877" Score="3" Body="&lt;p&gt;You can easily rename your computer by editing the /etc/ hostname file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Terminal, type &lt;code&gt;sudo nano /etc/hostname&lt;/code&gt;, press &lt;kbd&gt;Enter&lt;/kbd&gt;, type your password and press &lt;kbd&gt;Enter&lt;/kbd&gt; again. Delete the old name and type the new one. Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;O&lt;/kbd&gt; to save and then  &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; to close the editor. The new name will enter into effect after a reboot.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-23T19:38:50.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21259" PostTypeId="2" ParentId="21257" CreationDate="2019-11-23T19:38:52.793" Score="2" Body="&lt;p&gt;in terminal: &lt;code&gt;hostnamectl set-hostname new-hostname&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19520" LastActivityDate="2019-11-23T19:38:52.793" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21260" PostTypeId="1" CreationDate="2019-11-23T22:32:24.950" Score="0" ViewCount="223" Body="&lt;p&gt;I would like to to set the local time. Where is rcS or the file that contains UTC parameters?&lt;/p&gt;&#xA;" OwnerUserId="19535" LastEditorUserId="308" LastEditDate="2019-12-19T01:00:18.623" LastActivityDate="2019-12-20T01:32:45.773" Title="How can I choose a time zone?" Tags="|release-juno|settings|release-hera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21261" PostTypeId="1" CreationDate="2019-11-24T00:06:44.040" Score="0" ViewCount="77" Body="&lt;p&gt;I have had trouble using Blender 2.81 due to the way Elementary OS keyboard shortcuts interact with the software.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Set key combo for Selecting multiple edgeloops is Shift + Alt + Click. This works in Windows 10, MacOSX, and other Linux Distros. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have confirmed on Blender's &lt;a href=&quot;https://blender.stackexchange.com/questions/122333/selecting-multiple-edge-loops-in-blender-2-8&quot;&gt;stack exchange&lt;/a&gt; others are having this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to modify how the system-wide shortcuts interact with programs?&lt;/p&gt;&#xA;" OwnerUserId="19243" LastActivityDate="2020-08-21T00:02:50.343" Title="Elementary OS Blocks Shift + Alt in Blender unlike other Linux Distros" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21264" PostTypeId="1" CreationDate="2019-11-24T09:25:00.570" Score="0" ViewCount="51" Body="&lt;p&gt;I at first had an update problem. As I had manually stopped an update (I shut down the computer because the update took too much time), after that updates were blocked by something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I therefore searched the Internet to look after what was blocking updates. I found :&#xA;&lt;a href=&quot;https://www.addictivetips.com/ubuntu-linux-tips/upgrade-to-elementary-os-juno/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.addictivetips.com/ubuntu-linux-tips/upgrade-to-elementary-os-juno/&lt;/a&gt;&#xA;and thought it might fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the upgrade to Juno while trying to solve this update problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I typed all the proposed commands as proposed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I restarted the computer, there were 1500 available updates for the OS.&#xA;I tried to really do these updates from the Appcenter. But I had to interrupt them one more time (the computer was freezing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, elementary OS doesn't boot, even after more than an hour. I once had the following error message while trying to boot :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : Error sending C_POWER_TBL : time out after 500ms.&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : set power fail, ret= -110&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : Queue 4 stuck for 2048 ms.&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : On demand firmware reload&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020&#xA;&#xA;                                                                                  Unable to set up bootstrap uCode : -5&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020&#xA;&#xA;                                                                                  Unable to set up bootstrap uCode : -5&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020&#xA;&#xA;                                                                                  Unable to set up bootstrap uCode : -5&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020&#xA;&#xA;                                                                                  Unable to set up bootstrap uCode : -5&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : BSM uCode verification failed at addr 0x00003800+0 (of 900), is 0xa5a5a5a2, s/b 0xf802020&#xA;&#xA;                                                                                  Unable to set up bootstrap uCode : -5&#xA;&#xA;[ 5553.340262] iwl3945 000: 02 : 00 : 0 : Unable to initialize device after 5 attempts &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I would like to know if there is a way not to reinstall elementary (and how). Thank you!&lt;/p&gt;&#xA;" OwnerUserId="15258" LastEditorUserId="3018" LastEditDate="2019-11-24T13:29:10.937" LastActivityDate="2019-11-24T13:29:10.937" Title="elementary doesn't boot anymore (after having tryied to upgrade to Juno)" Tags="|release-juno|updates|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21265" PostTypeId="1" CreationDate="2019-11-24T16:35:30.330" Score="1" ViewCount="626" Body="&lt;p&gt;first, I would like to apologize. I am not an experienced Linux user. However, I used to run Ubuntu Linux on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently wanted to try something new and fast and snappy as Elementary OS. The problems appears when I boot up my Elementary OS from USB and then click on Try Without installing. The speakers start buzzing. It sounds like a weird static noise that will not stop. Even full installation does not help. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second problem is with the resolution. Only choice I have in my system is 800x640 and system can not detect my laptop screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last problem is with the terminal. I have tried to get some update via sudo apt-get update and so on. It does not allow me to do anything due to insecure(8) manpage repository error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is ASUS Zenbook 14 UM431DA (Ryzen 5 3500U and 8GB RAM).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just want to mention that I do not have any sound or resolution problem with Ubuntu, that works perfectly fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there anyone who could help me with this issue ?&lt;/p&gt;&#xA;" OwnerUserId="19542" LastActivityDate="2024-03-23T15:01:25.157" Title="Problems with Elementary on ASUS laptop" Tags="|release-juno|display|sound|resolution|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21266" PostTypeId="1" CreationDate="2019-11-24T16:53:47.420" Score="2" ViewCount="149" Body="&lt;p&gt;For young kids I think it is easier to start with only a couple of open web sites.&lt;/p&gt;&#xA;" OwnerUserId="19544" LastActivityDate="2019-11-24T16:53:47.420" Title="Is there a whitelist for internet access in parental controls?" Tags="|permissions|internet-browser|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21268" PostTypeId="2" ParentId="21261" CreationDate="2019-11-24T18:57:44.020" Score="1" Body="&lt;p&gt;Go to &lt;code&gt;System Settings &amp;gt; Keyboard &amp;gt; Layout&lt;/code&gt; and change &quot;Switch Layout&quot; to any other option besides Alt+Shift.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-11-24T18:57:44.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21269" PostTypeId="2" ParentId="21260" CreationDate="2019-11-24T19:03:23.993" Score="1" Body="&lt;p&gt;I guess you want elementary to use localtime instead of UTC to avoid time differences when dualbooting elementary and Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just execute on terminal: &lt;code&gt;timedatectl set-local-rtc 1 --adjust-system-clock&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can check if that's working with the command &lt;code&gt;timedatectl&lt;/code&gt; (may need to reboot).&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2016/05/time-differences-ubuntu-1604-windows-10/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-11-24T19:03:23.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21271" PostTypeId="1" CreationDate="2019-11-24T20:22:41.000" Score="0" ViewCount="67" Body="&lt;p&gt;I have just installed Elementary on a laptop and I would love to play some music...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I look for a way I can browse the existing folders where the music is saved and from there be able to see the metadata of the songs. Ultimately it would be good if I could play the songs too! ;-) can anybody help me please? :-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before I used Windows and I &quot;just&quot; had to add the attributes' columns (Artist, Album, Year, Bit rate...) in the folder view.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried EasyTAG but the browsing is not very smooth as I am asked, there I experience many notifications popping out every time I open a folder. Also Picard is showing me the metadata of only one song at a time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I look forward to hear from any of you. Cheerios L&lt;/p&gt;&#xA;" OwnerUserId="19550" LastActivityDate="2019-11-24T20:22:41.000" Title="Help needed - Browse music folders and show metadata of audio files" Tags="|music|file-management|audio-player|metadata|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21274" PostTypeId="2" ParentId="21164" CreationDate="2019-11-25T09:40:45.187" Score="1" Body="&lt;p&gt;The problem is on hardware, i replaced the battery with a new one. Everything back to normal&lt;/p&gt;&#xA;" OwnerUserId="19436" LastActivityDate="2019-11-25T09:40:45.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21275" PostTypeId="2" ParentId="10981" CreationDate="2019-11-25T10:49:52.310" Score="1" Body="&lt;p&gt;use flatpak and run the bellow command, it will allow flatpak apps to use your theme, no idea why canonical doesn't expose the theme and icon folders already, snaps are doa just because of the theming, then again they are also perform much slower than any other option out there&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak override --filesystem=~/.themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19553" LastActivityDate="2019-11-25T10:49:52.310" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21276" PostTypeId="1" CreationDate="2019-11-25T14:53:42.050" Score="2" ViewCount="187" Body="&lt;p&gt;Whenever I want to open Firefox it takes a second or two before I even see the window. Chromium-based browsers like Chrome or Brave launch instantly. I don't have issues with any other app except for Firefox. Is there something I can do to make it start faster? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also prefer Chrome's &quot;where to save your file&quot; options when I download something since Chrome opens an Elementary os UI, Firefox have something totally different in that regard. Is there  something similar in Firefox?&lt;/p&gt;&#xA;" OwnerUserId="19556" LastEditorUserId="3018" LastEditDate="2019-11-26T17:01:10.923" LastActivityDate="2021-10-20T13:07:55.667" Title="Slow Startup Of Firefox" Tags="|google-chrome|firefox|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21277" PostTypeId="1" CreationDate="2019-11-26T14:59:01.407" Score="1" ViewCount="50" Body="&lt;p&gt;I have recently installed elementary on my Acer Chromebook 11, but now whenever i boot it up it, it goes through the boot menu, it just goes to a black screen (the screen is turned on just displaying black). &#xA;It works completely fine with other distros, and i suspect it might be an issue with the Chromebook's graphics and the LightDM greeter pantheon uses.&lt;/p&gt;&#xA;" OwnerUserId="19567" LastEditorUserId="16827" LastEditDate="2019-12-07T09:54:14.357" LastActivityDate="2019-12-07T09:54:14.357" Title="eOS on chromebook booting to black screen" Tags="|release-juno|greeter|chromebook|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21278" PostTypeId="2" ParentId="21161" CreationDate="2019-11-26T16:36:16.463" Score="1" Body="&lt;p&gt;Please run Commands in this order, It should definitely work:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo su&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;enter, then your password&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;su - -s /bin/bash lightdm&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;enter&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power&#xA;  sleep-inactive-ac-type nothing&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2019-11-26T16:36:16.463" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21279" PostTypeId="2" ParentId="21255" CreationDate="2019-11-26T16:44:41.013" Score="1" Body="&lt;p&gt;Try to put chrome icon on the dock, and other applications you work with.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastEditorUserId="16827" LastEditDate="2019-11-30T17:27:32.900" LastActivityDate="2019-11-30T17:27:32.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21280" PostTypeId="2" ParentId="21236" CreationDate="2019-11-26T16:51:51.677" Score="1" Body="&lt;p&gt;Install &quot;dconf editor&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change property value of:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Desktop &gt; ibus &gt; panel &gt; auto-hide-timeout&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2019-11-26T16:51:51.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21281" PostTypeId="2" ParentId="21276" CreationDate="2019-11-26T17:09:19.580" Score="-1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Whenever I want to open Firefox it takes a second or two before I even&#xA;  see the window. Chromium-based browsers like Chrome or Brave launch&#xA;  instantly. I don't have issues with any other app except for Firefox.&#xA;  Is there something I can do to make it start faster?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Get a SSD if you don't have one, disable extensions that you don't use, disable pocket if you don't use it. You can also disable disk cache and use only RAM cache if you have enough RAM, however this won't matter for startup probably.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To disable pocket you need to go to &lt;code&gt;about:config&lt;/code&gt; and set &lt;code&gt;extensions.pocket.enabled&lt;/code&gt; to &lt;code&gt;False&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I also prefer Chrome's &quot;where to save your file&quot; options when I&#xA;  download something since Chrome opens an Elementary os UI, Firefox&#xA;  have something totally different in that regard. Is there something&#xA;  similar in Firefox?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If you go to Preferences &gt; General &gt; Files and Applications you can set it to &quot;Always ask you where to save Files&quot;.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2019-11-26T17:09:19.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21282" PostTypeId="1" CreationDate="2019-11-27T07:16:00.233" Score="1" ViewCount="24" Body="&lt;p&gt;When notebook is booted when plugged in the docking station, all displays are used properly. When plugging out and in again without reboot in the docking station, only one screen is used, but shows a blank screen with only the mouse visible.&#xA;This worked fine up to a recent update (of course, I don't know which one)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I figure out which update caused the problem and where can I report this bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hardware: HP Elitebook, HP Docking with 3 Displays (2xDP,1xVGA)&#xA;Software: elementary OS Juno with all patches&lt;/p&gt;&#xA;" OwnerUserId="19571" LastEditorUserId="16827" LastEditDate="2019-12-07T09:42:13.610" LastActivityDate="2019-12-07T09:42:13.610" Title="Display is blank when plugged in docking station" Tags="|release-juno|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21284" PostTypeId="1" AcceptedAnswerId="21285" CreationDate="2019-11-27T18:34:12.703" Score="0" ViewCount="27" Body="&lt;p&gt;The invite link for Slack at &lt;a href=&quot;https://elementary.io/get-involved#translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved#translations&lt;/a&gt; does not work. It says: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Please check with the person who shared it with you to see if there's a new link available.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Does anyone know who &lt;em&gt;the person&lt;/em&gt; is and how to contact him?&lt;/p&gt;&#xA;" OwnerUserId="17845" LastActivityDate="2019-11-27T19:38:30.170" Title="Unable to join the translators chat" Tags="|translation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21285" PostTypeId="2" ParentId="21284" CreationDate="2019-11-27T19:38:30.170" Score="0" Body="&lt;p&gt;Any issue related to the elementary.io website can be reported here: &lt;a href=&quot;https://github.com/elementary/website/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary OS website GitHub&lt;/a&gt;. Your particular issue is already reported &lt;a href=&quot;https://github.com/elementary/website/issues/2255&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, and it seems to be caused by slack links expiring after a certain number of uses. I encourage you to contribute to that issue on github, and maybe ask for a working invite link there.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-11-27T19:38:30.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21286" PostTypeId="1" AcceptedAnswerId="21298" CreationDate="2019-11-28T16:42:53.667" Score="1" ViewCount="690" Body="&lt;p&gt;I've got a trouble with wrong font displaying in elementary OS. The text of all system headings, controls and terminal is blurred and looks like a long curve line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RO0eY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RO0eY.png&quot; alt=&quot;My desktop screenshot&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Orhsp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Orhsp.png&quot; alt=&quot;My terminal screenshot&quot;&gt;&lt;/a&gt;&#xA;But text inside applications looks fine as it was. So I decided that problem could be connected with pantheon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I googled it, but found only problems with resizing, not blurring. Now I am stuck at fixing it.&lt;/p&gt;&#xA;" OwnerUserId="19582" LastEditorUserId="19582" LastEditDate="2019-11-28T17:13:40.843" LastActivityDate="2019-12-01T14:33:37.100" Title="Font problems in elementary os" Tags="|pantheon|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21287" PostTypeId="2" ParentId="21286" CreationDate="2019-11-28T17:27:09.453" Score="0" Body="&lt;p&gt;As mentioned &lt;a href=&quot;https://elementaryos.stackexchange.com/a/17783/17985&quot;&gt;here&lt;/a&gt;, the scrambled text in window titles might be due to a Screenshot utility 'conceal text' bug. &#xA;Suggested fix:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;launch Screenshot&lt;/li&gt;&#xA;&lt;li&gt;in Screenshot preferences window, turn off 'Conceal Text' option:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mASNM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mASNM.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;If this helps, please report this bug to elementary OS devs @ &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-11-28T17:27:09.453" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="21288" PostTypeId="1" CreationDate="2019-11-28T18:27:11.993" Score="1" ViewCount="183" Body="&lt;p&gt;Hello I was wondering if anyone else here is having trouble using Gnome tweak for Elementary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is was working for awhile but all of a sudden it will not open. I have tried removing it and them reinstalling it but the same out come&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for any help with this &lt;/p&gt;&#xA;" OwnerUserId="19428" LastEditorUserId="19428" LastEditDate="2019-11-28T18:44:05.587" LastActivityDate="2019-11-28T19:24:33.327" Title="Elementary Gnome tweak not working" Tags="|gnome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21289" PostTypeId="1" CreationDate="2019-11-28T18:42:57.463" Score="1" ViewCount="275" Body="&lt;p&gt;I have noticed that everytime I lock desktop resolution of lock screen change to I guess 800 something while my resolution of desktop is 1920x900.&lt;/p&gt;&#xA;" OwnerUserId="19583" LastActivityDate="2024-02-14T12:08:20.950" Title="Login screen incorrect resolution" Tags="|release-juno|resolution|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21291" PostTypeId="2" ParentId="21288" CreationDate="2019-11-28T19:24:33.327" Score="3" Body="&lt;p&gt;As Philip Scott (the tweaks dev) replies &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks/issues/115#issuecomment-558449769&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, the issue is being taken care of. So I guess we'll have to wait a little until the update will be deployed in the PPA.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastActivityDate="2019-11-28T19:24:33.327" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21292" PostTypeId="1" AcceptedAnswerId="21294" CreationDate="2019-11-28T23:34:12.177" Score="2" ViewCount="139" Body="&lt;p&gt;I use OpenOffice, but got curious why so many Linux users and distributions are more into LibreOffice, so I downloaded it to check it out. When I tried to install it (a while back) I got an error message that said some conflict with files also used by Open Office was encountered.&#xA;Ever since I can't install, remove, update or upgrade anything.&#xA;I have tried the solutions suggested &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14562/unable-to-update-or-install-anything-due-to-unmet-dependencies&quot;&gt;here&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18507/packages-have-unmet-dependencies-error&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://askubuntu.com/questions/716915/dpkg-error-processing-packages-cannot-complete-install-desktop-gui-from-termina&quot;&gt;here&lt;/a&gt; but no solution and things keep me running in circles.&#xA;Here's what I get when I tried autoremove, purge and autoclean:&lt;a href=&quot;https://i.stack.imgur.com/CiQyn.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CiQyn.jpg&quot; alt=&quot;autoremove, purge and autoclean&quot;&gt;&lt;/a&gt;&#xA;And when I ran the fix-broken install I got this: &lt;a href=&quot;https://i.stack.imgur.com/XdZvv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XdZvv.png&quot; alt=&quot;fix-broken install&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZGPCo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZGPCo.jpg&quot; alt=&quot;cont. fix-broken&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And apt-get -f install:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kD6da.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kD6da.jpg&quot; alt=&quot;apt-get -f install&quot;&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZGPCo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZGPCo.jpg&quot; alt=&quot;cont. fix-broken&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And trying to simply remove it: &lt;a href=&quot;https://i.stack.imgur.com/JKKAB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JKKAB.jpg&quot; alt=&quot;back to square 1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I'm back to square one. Can't re-install or remove it, and can't ignore it either because it prevents me from installing or removing other stuff and even from updating the system (there are already 50 system components waiting in line in the AppCenter to be updated).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is welcome. Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded OpenOffice from their official site short after I installed elementary, it never gave me any problem, and still works fine. It's the LibreOffice that's causing me all this trouble. I downloaded it from their site too (more than one month after OpenOffice, but I didn't install it immediately, and by the time I did -- and I don't recall this part so clearly -- I think I had learned already that it's in the repository and installed from there (or maybe I learned that short after installing the download version, I don't know anymore for sure). Anyway, the file I downloaded is still in the downloads directory and is called LibreOffice_6.3.3_Linux_x86-64_deb.tar.gz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE:&#xA;As Bo rislav suggested, I tried using aptitude instead of apt. Here is what I got:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nJ7QD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nJ7QD.png&quot; alt=&quot;aptitude -f install&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19358" LastEditorUserId="19358" LastEditDate="2019-11-30T13:49:45.757" LastActivityDate="2019-12-01T02:28:07.660" Title="Can't install/remove, upgrade/update ANYTHING" Tags="|apt|libreoffice|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21294" PostTypeId="2" ParentId="21292" CreationDate="2019-11-30T00:03:56.450" Score="2" Body="&lt;p&gt;It looks like the version of Libre office you try to install cannot work together with the version of Open Office you have.  Try to boot into the recovery mode and fix broken packages from there. To achieve this, choose &lt;strong&gt;Advanced options for Elementary OS&lt;/strong&gt; from the grub bootmenu screen, then &lt;strong&gt;Recovery mode&lt;/strong&gt;. Connect to the network from there first, and after that choose &lt;strong&gt;Fix broken packages&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is something you should know - elementaryOS Juno it is based on Ubuntu 18.04 so most of the applications and solutions for Ubuntu 18.04 works also for elementary&#xA;I suggest you to try this one - &lt;a href=&quot;http://www.iasptk.com/ubuntu-fix-broken-package-best-solution/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.iasptk.com/ubuntu-fix-broken-package-best-solution/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or this one also:&#xA;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2015/01/fix-broken-packages-in-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2015/01/fix-broken-packages-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-01T02:28:07.660" LastActivityDate="2019-12-01T02:28:07.660" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="21295" PostTypeId="2" ParentId="18324" CreationDate="2019-11-30T00:17:47.627" Score="0" Body="&lt;p&gt;The screenshot looks like a normal screen with 1024x768 resolution. Can you try to hold &lt;code&gt;Ctrl&lt;/code&gt; and press &lt;code&gt;-&lt;/code&gt;  repeatedly to make it smaller (&lt;code&gt;Ctrl&lt;/code&gt; and &lt;code&gt;+&lt;/code&gt; to make it bigger) to see if it has an effect?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-11-30T00:17:47.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21296" PostTypeId="2" ParentId="18640" CreationDate="2019-11-30T08:17:09.080" Score="3" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install ibus-avro&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in terminal &lt;code&gt;sudo im-config&lt;/code&gt; and select &lt;strong&gt;OK&lt;/strong&gt; then &lt;strong&gt;Yes&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;strong&gt;Ibus&lt;/strong&gt; as input method for the system&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click &lt;strong&gt;Ok&lt;/strong&gt; and &lt;strong&gt;Ok&lt;/strong&gt; for the next windows. Then restart your computer.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type in terminal &lt;code&gt;ibus-setup&lt;/code&gt; and remember your keyboard shortcut to switch layout, in our case it's &lt;code&gt;Ctrl + Space&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose &lt;strong&gt;Input Method&lt;/strong&gt; tab and Click &lt;strong&gt;Add&lt;/strong&gt; button then &quot;&lt;strong&gt;:&lt;/strong&gt;&quot; icon for more list&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Choose &lt;strong&gt;Bengali&lt;/strong&gt; and select &lt;strong&gt;Avro Phonetic&lt;/strong&gt; which you need.&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2371/how-can-i-use-ibus-as-the-default-input-method&quot;&gt;More in Details&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Done! Now you can switch layout using Shortcut mention above.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16836" LastEditorUserId="16836" LastEditDate="2019-11-30T14:11:17.343" LastActivityDate="2019-11-30T14:11:17.343" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21297" PostTypeId="1" CreationDate="2019-12-01T14:21:39.583" Score="1" ViewCount="99" Body="&lt;p&gt;As the title says it simply does not work on elementary os. I've tried it with all my other devices running mac, windows and android and they all work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running Juno and my chrome browser version is 78.0.3904.108. I've also tried chromium, vivaldi brave and opera. Casting with them do not work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried casting with following flags enable and disabled and every combination you can think of:&lt;br&gt;&#xA;&lt;strong&gt;Connect to Cast devices on all IP addresses&lt;/strong&gt;&lt;br&gt;&#xA;&lt;strong&gt;Cast Media Route Provider&lt;/strong&gt;&lt;br&gt;&#xA;&lt;strong&gt;Mirroring Service&lt;/strong&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also tried mkchromecast but that didn't work either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone else having these issues or can point me in the right direction.&lt;/p&gt;&#xA;" OwnerUserId="19595" LastEditorUserId="19595" LastEditDate="2019-12-01T15:55:01.023" LastActivityDate="2019-12-01T15:55:01.023" Title="How do I cast from chrome browser to my chrome cast" Tags="|release-juno|google-chrome|chromium|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21298" PostTypeId="2" ParentId="21286" CreationDate="2019-12-01T14:33:37.100" Score="2" Body="&lt;p&gt;The thing that worked for me is &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11687/fonts-looks-weird-at-loki-and-just-in-my-user-session-how-do-i-fix-it&quot;&gt;Fonts looks weird at Loki (and just in my user session!). How do I fix it?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I got an error:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;GLib-GIO-Message: 21:06:40.395: Using the 'memory' GSettings backend.&#xA; Your settings will not be saved or shared with other applications.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I solved it as described here &lt;a href=&quot;https://blog.csdn.net/juwenkailaodi/article/details/86525841]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.csdn.net/juwenkailaodi/article/details/86525841]&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;export GIO_EXTRA_MODULES=/usr/lib/x86_64-linux-gnu/gio/modules/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19582" LastActivityDate="2019-12-01T14:33:37.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21300" PostTypeId="1" CreationDate="2019-12-01T17:12:27.080" Score="0" ViewCount="35" Body="&lt;p&gt;Bonjour, mon casque bose n'est pas reconnu je n'ai rien installer pour l'instant, je voulais avoir votre avis avant, j'ai regarde très vite sur internet les topics mais pas grand chose.&#xA;Merci d'avance&lt;/p&gt;&#xA;" OwnerUserId="19597" LastActivityDate="2019-12-01T21:33:46.807" Title="Casque bose qc35II non reconnu" Tags="|bluetooth|software-recommendation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21301" PostTypeId="1" CreationDate="2019-12-01T18:53:29.127" Score="0" ViewCount="184" Body="&lt;p&gt;Does anybody know a way to replace the slingshot (5x3 application launcher) with something like the Gnome application launcher? The problem is that it is not usefull for me to scroll(or click for a category and scroll) to find the application launcher I need. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2023-12-18T13:08:30.983" Title="Does anybody know a slingshot replacement solution for elementary OS?" Tags="|slingshot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21302" PostTypeId="1" CreationDate="2019-12-01T20:10:15.123" Score="0" ViewCount="498" Body="&lt;p&gt;I can't get the right-click button on my touchpad no matter what I do.  I have used ElementaryOS before and have had to go to the touchpad prefs and selected &amp;quot;Hardware Default&amp;quot;. This used to work - not anymore. No matter what I try the right click acts like the left click.  I can't get a context menu to come up at all anymore. Now everything is a left click... this is driving me nuts. I don't like using the &amp;quot;Press and Hold&amp;quot; feature for the secondary mouse button - I have a perfectly good and working right-click button. The prefs app has been changed and now there is no more right-click.&lt;/p&gt;&#xA;&lt;p&gt;UPDATE:&#xA;So, I've done some more testing. Here is what happened:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I did a clean install of ElementaryOS.&lt;/li&gt;&#xA;&lt;li&gt;I ran all the updates.&lt;/li&gt;&#xA;&lt;li&gt;I changed the touchpad press to &amp;quot;Hardware&amp;quot;... nothing happened. It seems like none of the settings on that drop-down menu do anything.&lt;/li&gt;&#xA;&lt;li&gt;Clean install again.&lt;/li&gt;&#xA;&lt;li&gt;When to touchpad prefs, changed to &amp;quot;hardware&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Tested and it worked as expected.&lt;/li&gt;&#xA;&lt;li&gt;Ran updates.&lt;/li&gt;&#xA;&lt;li&gt;Tested again... still worked. I am afraid to mess with the prefs again. But it seems that this part of the prefs isn't working correctly.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3632" LastEditorUserId="11700" LastEditDate="2021-10-13T08:26:27.860" LastActivityDate="2024-03-01T13:01:25.243" Title="Right mouse button on touchpad" Tags="|touchpad|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21303" PostTypeId="2" ParentId="21300" CreationDate="2019-12-01T21:33:46.807" Score="1" Body="&lt;p&gt;Bonjour,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;J'ai aussi eu un problème de connexion avec un casque SONY WH-1000XM3, si avec Elementary OS tu n'arrives pas à bien synchroniser un casque, une enceinte... bref un dispositif audio le mieux est d'installer blueman&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install blueman&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Lance l'application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2PYoy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2PYoy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lance une recherche&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4alzB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4alzB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sélectionne ton casque&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J9eDk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J9eDk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lance la configuration&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fbQEs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fbQEs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Initial Problem&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can't pair headphones&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Solution&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install blueman&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-01T21:33:46.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21304" PostTypeId="2" ParentId="21302" CreationDate="2019-12-01T21:57:43.137" Score="0" Body="&lt;p&gt;I used to have the same problem with this laptop (not a huge fan of touchpad anyway), so much so that I ended buying a mouse.&#xA;But recently I discovered that if I touch the pad very very lightly with two fingers (before the two fingers-touch had not worked either) BUT delay a tiny bit longer than a regular left click, when I release the pad the right click will be taken.&#xA;I discovered it accidentaly, while playing gnonogram while recharging the mouse batteries. I am not sure whether this is the way it always work for every app (just I didn't know it) or it works just on that game, but I'm assuming the first is the case.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-12-01T21:57:43.137" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21305" PostTypeId="2" ParentId="14025" CreationDate="2019-12-02T05:08:59.880" Score="1" Body="&lt;p&gt;As I can see you already installed iBus Avro now you need to change &lt;strong&gt;Input Method Configuration&lt;/strong&gt; only.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo im-config&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;strong&gt;Ok&lt;/strong&gt; then &lt;strong&gt;Yes&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;code&gt;Ibus&lt;/code&gt; as input method for the system&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click &lt;strong&gt;Ok&lt;/strong&gt; and &lt;strong&gt;Ok&lt;/strong&gt; for the next windows. Then restart your computer.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="16836" LastActivityDate="2019-12-02T05:08:59.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21306" PostTypeId="1" CreationDate="2019-12-02T08:25:33.570" Score="0" ViewCount="1343" Body="&lt;p&gt;I have followed this tutorial &lt;a href=&quot;https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/&lt;/a&gt; but I get,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;You might want to run 'apt --fix-broken install' to correct these. The following packages have unmet dependencies: mongodb-org-server : Depends: libcurl3 (&amp;gt;= 7.16.2) but it is not going to be installed E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there any solution? Or what ubuntu version I need to install in order to install mongoDB?&#xA;My OS version when I run: &lt;code&gt;lsb_release -a&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.0 Juno&#xA;Release:    5.0&#xA;Codename:   juno&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="19599" LastEditorUserId="16827" LastEditDate="2019-12-05T07:40:24.043" LastActivityDate="2020-01-05T10:01:20.177" Title="It is possible to install MongoDB on elementary OS?" Tags="|release-juno|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21307" PostTypeId="1" CreationDate="2019-12-02T11:23:39.100" Score="0" ViewCount="1084" Body="&lt;p&gt;I'm using HP Probook G6 with Intel UHD 620 and I can't install Intel Graphics. I already tried with intel-graphics-tool, but I got error: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/0pouL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0pouL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And this is the output: &#xA;&lt;a href=&quot;https://pastebin.com/E0ZmMxiG&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/E0ZmMxiG&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I have elementary OS 5.0 Juno&lt;/p&gt;&#xA;" OwnerUserId="19601" LastActivityDate="2019-12-21T11:09:53.183" Title="Cannot install Intel Graphics UHD 620" Tags="|graphics|intel|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21308" PostTypeId="2" ParentId="21307" CreationDate="2019-12-02T13:40:14.920" Score="2" Body="&lt;p&gt;Whenever dealing with drivers, you first need to remember that elementary os 5.0 is based on Ubuntu 18.04. With this in mind, you might notice that the repository &lt;a href=&quot;https://download.01.org/gfx/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.01.org/gfx/ubuntu/&lt;/a&gt;, described in your screenshot, does not contain anything usable above Ubuntu 17.10. You should also know that elementary OS 5.0 already includes the appropriate MESA Intel drivers. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running the command &lt;code&gt;glxinfo | grep &quot;OpenGL&lt;/code&gt; should output something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OpenGL version string: 3.0 Mesa 19.0.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If, like me, you encountered some issues running some games using the intel graphics adapter, you might benefit from installing the Mesa Vulkan packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mesa-vulkan-drivers vulkan-utils vulkan-tools&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That being said, if you really need the latest drivers, you could try using the oibaf drivers ppa:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:oibaf/graphics-drivers&#xA;sudo apt-get update&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the upgrade completes, running &lt;code&gt;glxinfo | grep &quot;OpenGL version&quot;&lt;/code&gt; again should output the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OpenGL version string: 3.0 Mesa 20.0.0-devel (git-3e21e17 2019-12-02 bionic-oibaf-ppa)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT: if, during the update process, you encounter some ppa errors, you might need to do some cleanup first (maybe you added some obsolete repository?). Just run the following command, replacing &lt;code&gt;name-of-the-repository&lt;/code&gt; with the name of the one you have to remove:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:name-of-the-repository&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, to remove the one from your screenshot:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:ubuntu-x-swat/intel-graphics-updates&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-21T11:09:53.183" LastActivityDate="2019-12-21T11:09:53.183" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="21309" PostTypeId="2" ParentId="21306" CreationDate="2019-12-02T16:35:06.253" Score="2" Body="&lt;p&gt;Follow this, It should work, elementary OS Juno is based on Ubuntu 18.04 Bionic, So follow the same reference:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow this order:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;wget -qO - &lt;a href=&quot;https://www.mongodb.org/static/pgp/server-4.2.asc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.mongodb.org/static/pgp/server-4.2.asc&lt;/a&gt; | sudo&#xA;  apt-key add -&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;echo &quot;deb [ arch=amd64 ] &lt;a href=&quot;https://repo.mongodb.org/apt/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://repo.mongodb.org/apt/ubuntu&lt;/a&gt;&#xA;  bionic/mongodb-org/4.2 multiverse&quot; | sudo tee&#xA;  /etc/apt/sources.list.d/mongodb-org-4.2.list&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;sudo apt-get install -y mongodb-org&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17867" LastEditorUserId="16827" LastEditDate="2019-12-06T05:09:03.747" LastActivityDate="2019-12-06T05:09:03.747" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21310" PostTypeId="1" CreationDate="2019-12-02T17:55:14.660" Score="0" ViewCount="284" Body="&lt;p&gt;I'm using a large TV as my monitor for elementary os. When I use spotify, It's too dark. In Ubuntu i could fix this by disabling the color profile through gnome settings. How can I do this in elementary? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="19604" LastEditorUserId="16827" LastEditDate="2019-12-07T07:09:26.160" LastActivityDate="2023-12-17T03:03:25.387" Title="changing/disabling color profile" Tags="|display|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21311" PostTypeId="1" CreationDate="2019-12-02T19:29:08.850" Score="0" ViewCount="224" Body="&lt;p&gt;I'm trying to find a list of all language packs usable within elementary OS. Is there a complete list somewhere?&lt;/p&gt;&#xA;" OwnerUserId="19605" LastActivityDate="2020-01-01T20:03:30.493" Title="Which languages are available for elementary?" Tags="|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21312" PostTypeId="2" ParentId="21311" CreationDate="2019-12-02T19:43:43.557" Score="1" Body="&lt;p&gt;Visit the &lt;a href=&quot;https://l10n.elementary.io/languages/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Languages @ elementary Weblate&lt;/a&gt; to get an overview of the languages supported in elementary OS. If you want to view the support on a per app basis, go to the &lt;a href=&quot;https://l10n.elementary.io/projects/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Projects @ elementary Weblate&lt;/a&gt;. If you want to improve the translations, give this &lt;a href=&quot;https://elementary.io/docs/translation-guide#translation-guide&quot; rel=&quot;nofollow noreferrer&quot;&gt;Translation Guide&lt;/a&gt; a read.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-02T19:43:43.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21314" PostTypeId="1" CreationDate="2019-12-02T21:56:29.557" Score="3" ViewCount="487" Body="&lt;p&gt;While upgrading elementary os, I get following error from appstream:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;dpkg: error: version '/usr/share/app-info/yaml /usr/share/app-info/icons' has bad syntax: version string has embedded spaces&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything looks normal, but is this something that I can fix easily? Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full error is as belows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  appstream-data-pantheon appstream-data-pantheon-icons appstream-data-pantheon-icons-hidpi&#xA;3 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;Need to get 498 kB of archives.&#xA;After this operation, 5,120 B of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;Get:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon all 5.0-0+r82~ubuntu5.1.1 [197 kB]&#xA;Get:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon-icons all 5.0-0+r82~ubuntu5.1.1 [205 kB]&#xA;Get:3 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon-icons-hidpi all 5.0-0+r82~ubuntu5.1.1 [96.4 kB]&#xA;Fetched 498 kB in 1s (336 kB/s)                                &#xA;(Reading database ... 254963 files and directories currently installed.)&#xA;Preparing to unpack .../appstream-data-pantheon_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Unpacking appstream-data-pantheon (5.0-0+r82~ubuntu5.1.1) over (5.0-0+r79~daily~ubuntu5.0.1) ...&#xA;Preparing to unpack .../appstream-data-pantheon-icons_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Unpacking appstream-data-pantheon-icons (5.0-0+r82~ubuntu5.1.1) over (5.0-0+r79~daily~ubuntu5.0.1) ...&#xA;Preparing to unpack .../appstream-data-pantheon-icons-hidpi_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Unpacking appstream-data-pantheon-icons-hidpi (5.0-0+r82~ubuntu5.1.1) over (5.0-0+r79~daily~ubuntu5.0.1) ...&#xA;Setting up appstream-data-pantheon (5.0-0+r82~ubuntu5.1.1) ...&#xA;Setting up appstream-data-pantheon-icons (5.0-0+r82~ubuntu5.1.1) ...&#xA;Setting up appstream-data-pantheon-icons-hidpi (5.0-0+r82~ubuntu5.1.1) ...&#xA;Processing triggers for appstream (0.12.9-1+elementary10~ubuntu5.0.1) ...&#xA;dpkg: error: version '/usr/share/app-info/yaml /usr/share/app-info/icons' has bad syntax: version string has embedded spaces&#xA;AppStream cache update completed successfully.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19607" LastActivityDate="2019-12-02T21:56:29.557" Title="version string has embedded spaces" Tags="|release-juno|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21315" PostTypeId="1" CreationDate="2019-12-03T04:12:45.960" Score="0" ViewCount="182" Body="&lt;p&gt;I am running Elementary OS Juno and Youtube will not play within Chrome.  I press the play button but nothing plays.  If I run Epiphany, Youtube videos play fine.  I can only assume it has something to do with the Chrome configuration.  Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="18787" LastActivityDate="2023-12-12T14:05:25.623" Title="Youtube won't play in Chrome on Elementary OS Juno" Tags="|release-juno|google-chrome|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21316" PostTypeId="2" ParentId="21315" CreationDate="2019-12-03T04:16:38.590" Score="0" Body="&lt;p&gt;I think I may be able to answer my own question.  I have the YouTube Flash Video Player extension installed.  If I change the video player from &quot;Flash Player&quot; to &quot;HTML 5 Player&quot; then videos play fine. &lt;/p&gt;&#xA;" OwnerUserId="18787" LastActivityDate="2019-12-03T04:16:38.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21317" PostTypeId="1" CreationDate="2019-12-03T05:32:31.547" Score="1" ViewCount="92" Body="&lt;p&gt;I'm having an issue when trying to wake up my laptop from sleep.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It shows this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SRpUH.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SRpUH.jpg&quot; alt=&quot;laptop after &amp;quot;waking up&amp;quot;&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, nothing works, I have tried put my password to unlock but the system frezees, so, if you have any idea of how to solve this will be great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is my hardware info:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dual-Core AMD A12-9720P&lt;/li&gt;&#xA;&lt;li&gt;RADEON R7, 12 COMPUTE CORES 4C+8G&lt;/li&gt;&#xA;&lt;li&gt;Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev c8)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19608" LastEditorUserId="19360" LastEditDate="2019-12-09T10:45:55.110" LastActivityDate="2019-12-09T10:45:55.110" Title="Juno not waking up from sleep" Tags="|release-juno|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21319" PostTypeId="1" CreationDate="2019-12-03T09:05:39.617" Score="0" ViewCount="270" Body="&lt;p&gt;&lt;strong&gt;Main problem: [1.200632] nouveau 0000:01:00.0: unknown chipset (168000a1)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What different between previous PC's state? Only a new video card, previous was 960 gtx, &lt;strong&gt;now 1660 ti&lt;/strong&gt; (nVidia)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Installing new Hera 5.1. It finished, but then cursor is blinking only.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2) Trying to work without installation. UEFI -&gt; unknown chipset, without -&gt; blue screen and then turning off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3) Try to use rdblacklist=nouveau и nomodeset &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry, I am new in Linux)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think that open source nouveau driver for NVidia GPUs does not support my 1660 ti, but how to repair it? How possible to use blinked cursor, because Linux core ready to work? Thanks you for all the answers!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPD when installed 5.1 Hera... without different.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;UPD [05.12.2019] `[    63.427] (II) NOUVEAU driver for NVIDIA chipset families :&#xA;[    63.427]    RIVA TNT            (NV04)&#xA;[    63.427]    RIVA TNT2           (NV05)&#xA;[    63.427]    GeForce 256         (NV10)&#xA;[    63.427]    GeForce 2           (NV11, NV15)&#xA;[    63.427]    GeForce 4MX         (NV17, NV18)&#xA;[    63.427]    GeForce 3           (NV20)&#xA;[    63.427]    GeForce 4Ti         (NV25, NV28)&#xA;[    63.427]    GeForce FX          (NV3x)&#xA;[    63.427]    GeForce 6           (NV4x)&#xA;[    63.428]    GeForce 7           (G7x)&#xA;[    63.428]    GeForce 8           (G8x)&#xA;[    63.428]    GeForce 9           (G9x)&#xA;[    63.428]    GeForce GTX 2xx/3xx (GT2xx)&#xA;[    63.428]    GeForce GTX 4xx/5xx (GFxxx)&#xA;[    63.428]    GeForce GTX 6xx/7xx (GKxxx)&#xA;[    63.428]    GeForce GTX 9xx     (GMxxx)&#xA;[    63.428]    GeForce GTX 10xx    (GPxxx)&#xA;[    63.428] (II) modesetting: Driver for Modesetting Kernel Drivers: kms&#xA;[    63.428] (II) FBDEV: driver for framebuffer: fbdev&#xA;[    63.428] (II) VESA: driver for VESA chipsets: vesa&#xA;[    63.553] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19&#xA;[    63.554] (WW) Falling back to old probe method for modesetting&#xA;[    63.554] (II) modeset(1): using default device&#xA;[    63.554] (II) Loading sub module &quot;fbdevhw&quot;&#xA;[    63.554] (II) LoadModule: &quot;fbdevhw&quot;&#xA;[    63.554] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so&#xA;[    63.554] (II) Module fbdevhw: vendor=&quot;X.Org Foundation&quot;&#xA;[    63.554]    compiled for 1.20.4, module version = 0.0.2&#xA;[    63.554]    ABI class: X.Org Video Driver, version 24.0&#xA;[    63.554] (**) FBDEV(2): claimed PCI slot 1@0:0:0&#xA;[    63.554] (II) FBDEV(2): using default device&#xA;[    63.554] (II) modeset(G0): using drv /dev/dri/card0&#xA;[    63.555] (EE) Screen 0 deleted because of no matching config section.&#xA;[    63.555] (II) UnloadModule: &quot;modesetting&quot;&#xA;[    63.555] (EE) &#xA;Fatal server error:&#xA;[    63.555] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It doesn't content information of my video card GeForce 1660 ti. Trying to find the answer...&lt;/p&gt;&#xA;" OwnerUserId="19609" LastEditorUserId="16827" LastEditDate="2019-12-07T06:51:51.957" LastActivityDate="2023-12-18T09:03:10.353" Title="Hera is not installing with GeForce 1660 ti (unknown chipset)" Tags="|system-installation|boot|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21320" PostTypeId="1" CreationDate="2019-12-03T09:35:22.200" Score="2" ViewCount="57" Body="&lt;p&gt;Is there some sort of standard or commonly-used way to store data in elementary apps? I currently have a bunch of GObjects contained in a ListModel and would like to persist that to the disk and reload it when the app opens again. The Settings object doesn't seem like quite the right place for it as it's an unbounded chunk of text data from user input. Should I just stuff it in a leveldb instance or something? Or is there a better option?&lt;/p&gt;&#xA;" OwnerUserId="19610" LastActivityDate="2023-12-13T00:01:35.187" Title="How to store data from a ListModel?" Tags="|vala|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21321" PostTypeId="1" AcceptedAnswerId="21579" CreationDate="2019-12-03T10:03:56.360" Score="1" ViewCount="433" Body="&lt;p&gt;I've installed pantheon desktop over Ubuntu 18.04 but can't run it. Firstly I've tried to run it from LightDM just selecting it from drop-down menu, but after pressing &quot;log in&quot; it returns me back to LightDM and I don't find anything interesting in LightDM logs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I've tried to run pantheon manually on tty1:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;startx /usr/bin/ghome-session --session=pantheon --debug 2&amp;gt; log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And in &lt;code&gt;log&lt;/code&gt; I see this suspicious lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;gnome-session-binary[15662]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: starting gala.desktop: command=gala startup-id=10cbf37e055e8ae336157536606743993500000156620000&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: started pid:15813&#xA;gnome-session-binary[15662]: DEBUG(+): GsmManager: RegisterClient &#xA;gnome-session-binary[15662]: DEBUG(+): GsmManager: Adding new client 10cbf37e055e8ae336157536606760263500000156620096 to session&#xA;gnome-session-binary[15662]: DEBUG(+): uid = 1000&#xA;gnome-session-binary[15662]: DEBUG(+): pid = 15809&#xA;gnome-session-binary[15662]: DEBUG(+): exporting client to object path: /org/gnome/SessionManager/Client20&#xA;gnome-session-binary[15662]: DEBUG(+): exporting dbus client to object path: /org/gnome/SessionManager/Client20&#xA;gnome-session-binary[15662]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client20 to store&#xA;gnome-session-binary[15662]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client20&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: (pid:15813) done (status:127)&#xA;gnome-session-binary[15662]: WARNING: App 'gala.desktop' exited with code 127&#xA;gnome-session-binary[15662]: DEBUG(+): Re-starting app: /org/gnome/SessionManager/App1&#xA;gnome-session-binary[15662]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: starting gala.desktop: command=gala startup-id=10cbf37e055e8ae336157536606743993500000156620000&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: started pid:15818&#xA;gnome-session-binary[15662]: DEBUG(+): GsmAutostartApp: (pid:15818) done (status:127)&#xA;gnome-session-binary[15662]: WARNING: App 'gala.desktop' exited with code 127&#xA;gnome-session-binary[15662]: DEBUG(+): Re-starting app: /org/gnome/SessionManager/App1&#xA;gnome-session-binary[15662]: WARNING: App 'gala.desktop' respawning too quickly&#xA;gnome-session-binary[15662]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;xinit: connection to X server lost&#xA;&#xA;waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It seems there is some problems while running &lt;code&gt;gala&lt;/code&gt;, but how can I know what exactly gone wrong? Is there some &lt;code&gt;gala&lt;/code&gt; logs?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPD1:&#xA;I've found an error in &lt;code&gt;journalctl -xe&lt;/code&gt; output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;symbol lookup error: gala: undefined symbol: meta_screen_reorder_workspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;UPD2:&#xA;Well, as I understand, it is connected with this issue: &lt;a href=&quot;https://github.com/alucryd/aur/issues/98&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/alucryd/aur/issues/98&lt;/a&gt;, to work correctly we need a libmutter-2.0 version 2.39, but in ubuntu repos there is only 2.38, I don't know how to install it.&lt;/p&gt;&#xA;" OwnerUserId="19611" LastEditorUserId="19611" LastEditDate="2019-12-12T09:16:11.090" LastActivityDate="2019-12-12T14:24:46.273" Title="Issue with starting gala" Tags="|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21322" PostTypeId="2" ParentId="21320" CreationDate="2019-12-03T10:04:46.540" Score="0" Body="&lt;p&gt;I used a json array to save some data for an application I'm building. The data is saved in a file in the user's .config folder. Take a look at the &lt;a href=&quot;https://github.com/popvladaurel/torrential-remote/blob/75d092cc2d7e1883f77115ffd9bc9cd40a14b748/src/Server/Controller.vala#L95&quot; rel=&quot;nofollow noreferrer&quot;&gt;writeServers method&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you go over the entire &lt;a href=&quot;https://github.com/popvladaurel/torrential-remote/blob/75d092cc2d7e1883f77115ffd9bc9cd40a14b748/src/Server/Controller.vala#L1&quot; rel=&quot;nofollow noreferrer&quot;&gt;file&lt;/a&gt;, you'll see that it first verifies that the file exists, and creates it if it does not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QkmNF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QkmNF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-03T10:04:46.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21323" PostTypeId="1" CreationDate="2019-12-03T11:44:11.503" Score="0" ViewCount="134" Body="&lt;p&gt;There aren't updates but next to &quot;Operating System Updates&quot; appears the button &quot;Update&quot; and if I click it nothing happens. &lt;/p&gt;&#xA;" OwnerUserId="19240" LastActivityDate="2020-06-02T21:06:25.580" Title="Why AppCenter keeps saying &quot;1 Update Available&quot;?" Tags="|appcenter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21324" PostTypeId="1" AcceptedAnswerId="21333" CreationDate="2019-12-03T12:32:44.127" Score="1" ViewCount="99" Body="&lt;p&gt;What software EOS is using for wifi connectivity? Is this a custom themed NetworkManager? Wpa supplicant? something home made? I am asking about both: the beautiful UI app in the system tray and about the underlying daemon/service that does the actual connection.&lt;/p&gt;&#xA;" OwnerUserId="19612" LastActivityDate="2019-12-17T15:37:49.593" Title="What software Elementary uses for WiFi?" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21325" PostTypeId="1" CreationDate="2019-12-03T16:01:22.570" Score="1" ViewCount="323" Body="&lt;p&gt;Both programmes are configured to use the Roboto font. (Code uses Roboto Mono - but I've checked with Roboto Regular as well)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it's helpful, in Firefox some look right, like the exclamation mark, and others don't, like the normal red heart.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What kind of problem is this? How could I correct this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MPGel.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MPGel.png&quot; alt=&quot;example of problematic emojis&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a counter, here are some emojis that are displayed correctly:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/v1zP1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v1zP1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19384" LastEditorUserId="19384" LastEditDate="2019-12-03T19:23:40.313" LastActivityDate="2020-03-09T12:43:36.010" Title="Some emojis are black and white in Anki (qt programme) instead of colored like in other applications" Tags="|fonts|qt|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21326" PostTypeId="1" CreationDate="2019-12-03T18:36:00.877" Score="0" ViewCount="39" Body="&lt;p&gt;Running from installation off flash drive only.  Wifi wont connect though it sees my signal.  What adjustments do I need to make use my wifi?&lt;/p&gt;&#xA;" OwnerUserId="19613" LastActivityDate="2019-12-03T18:36:00.877" Title="Wifi wont connect" Tags="|system-installation|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21329" PostTypeId="1" CreationDate="2019-12-03T20:12:07.133" Score="3" ViewCount="486" Body="&lt;p&gt;Hera has just been released, but the installation page still has the 5.0 2018/10/16 checksum.&#xA;Can you please provide the 5.1 2019/12/02 one?&#xA;Thanks&#xA;TM&lt;/p&gt;&#xA;" OwnerUserId="19615" LastEditorUserId="16827" LastEditDate="2019-12-07T06:56:11.157" LastActivityDate="2019-12-14T13:12:52.607" Title="What is the checksum for the Hera ISO file?" Tags="|system-installation|release-hera|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21330" PostTypeId="2" ParentId="21325" CreationDate="2019-12-03T22:38:35.157" Score="1" Body="&lt;h1&gt;All right!&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;After searching around, stumbling upon Twitter Color Emoji (spoiler: doesn't work on Linux - only for Firefox: &lt;a href=&quot;https://github.com/eosrei/twemoji-color-font/issues/10#issuecomment-242988370&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/eosrei/twemoji-color-font/issues/10#issuecomment-242988370&lt;/a&gt; )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;...and a bit of stumbling around, I found the solution on reddit: &lt;a href=&quot;https://old.reddit.com/r/archlinux/comments/9q8dlj/how_to_better_enable_color_emojis/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to better enable Color Emojis!&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Here it goes!&lt;/h3&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a 75-noto-color-emoji.conf file in /etc/fonts/conf.avail/ with the following:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot;?&amp;gt;&#xA;&amp;lt;!DOCTYPE fontconfig SYSTEM &quot;fonts.dtd&quot;&amp;gt;&#xA;&amp;lt;fontconfig&amp;gt;&#xA;&#xA;    &amp;lt;!-- Add generic family. --&amp;gt;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;!-- This adds Noto Color Emoji as a final fallback font for the default font families. --&amp;gt;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;sans&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;append&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;serif&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;append&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;sans-serif&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;append&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;monospace&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;append&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;!-- Block Symbola from the list of fallback fonts. --&amp;gt;&#xA;    &amp;lt;selectfont&amp;gt;&#xA;        &amp;lt;rejectfont&amp;gt;&#xA;            &amp;lt;pattern&amp;gt;&#xA;                &amp;lt;patelt name=&quot;family&quot;&amp;gt;&#xA;                    &amp;lt;string&amp;gt;Symbola&amp;lt;/string&amp;gt;&#xA;                &amp;lt;/patelt&amp;gt;&#xA;            &amp;lt;/pattern&amp;gt;&#xA;        &amp;lt;/rejectfont&amp;gt;&#xA;    &amp;lt;/selectfont&amp;gt;&#xA;&#xA;    &amp;lt;!-- Use Noto Color Emoji when other popular fonts are being specifically requested. --&amp;gt;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Apple Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Segoe UI Emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Segoe UI Symbol&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Android Emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Twitter Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Twemoji&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Twemoji Mozilla&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;TwemojiMozilla&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;EmojiTwo&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Emoji Two&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;EmojiSymbols&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;    &amp;lt;match target=&quot;pattern&quot;&amp;gt;&#xA;        &amp;lt;test qual=&quot;any&quot; name=&quot;family&quot;&amp;gt;&amp;lt;string&amp;gt;Symbola&amp;lt;/string&amp;gt;&amp;lt;/test&amp;gt;&#xA;        &amp;lt;edit name=&quot;family&quot; mode=&quot;assign&quot; binding=&quot;same&quot;&amp;gt;&amp;lt;string&amp;gt;Noto Color Emoji&amp;lt;/string&amp;gt;&amp;lt;/edit&amp;gt;&#xA;    &amp;lt;/match&amp;gt;&#xA;&#xA;&amp;lt;/fontconfig&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Now enable above by issuing the following:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo ln -sf /etc/fonts/conf.avail/75-noto-color-emoji.conf /etc/fonts/conf.d/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Ta da! &lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Still on Firefox some emojis will remain black and white. Install Twitter Color Emoji for that: &lt;a href=&quot;https://github.com/eosrei/twemoji-color-font&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/eosrei/twemoji-color-font&lt;/a&gt; &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19384" LastEditorUserId="7" LastEditDate="2020-03-09T12:43:36.010" LastActivityDate="2020-03-09T12:43:36.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21333" PostTypeId="2" ParentId="21324" CreationDate="2019-12-04T04:38:46.270" Score="1" Body="&lt;p&gt;Here is the GitHub for the network switchboard plugin &lt;a href=&quot;https://github.com/elementary/switchboard-plug-network&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-network&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the indicator (thanks to @jena):&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-network&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-network&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll need Vala compiler, Switchboard library, Ninja and other things to compile.&lt;/p&gt;&#xA;" OwnerDisplayName="user18379" LastEditorUserId="19612" LastEditDate="2019-12-17T15:37:49.593" LastActivityDate="2019-12-17T15:37:49.593" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21334" PostTypeId="2" ParentId="21329" CreationDate="2019-12-04T08:34:14.323" Score="1" Body="&lt;p&gt;I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd66c32d53eab6f789b8e69e499305b7af0c9b3083ed54d50b111136d2795ea1&lt;/p&gt;&#xA;" OwnerUserId="19625" LastActivityDate="2019-12-04T08:34:14.323" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21337" PostTypeId="1" AcceptedAnswerId="21351" CreationDate="2019-12-04T14:17:39.893" Score="0" ViewCount="317" Body="&lt;p&gt;I upgraded today to version 5.1 Hera, but after updating the notebook touchpad stopped working. notebook: Lenovo Ideapad S145.&lt;/p&gt;&#xA;" OwnerUserId="19633" LastEditorUserId="16827" LastEditDate="2019-12-07T06:59:12.333" LastActivityDate="2019-12-07T06:59:12.333" Title="Touchpad issues after upgrading to new version 5.1" Tags="|touchpad|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21338" PostTypeId="1" CreationDate="2019-12-04T14:39:07.517" Score="0" ViewCount="648" Body="&lt;p&gt;I’m currently trying to use the latest installation media, released yesterday for elementary (version 5.1). Currently it’s showing no signs of support (drivers) for WiFi network adapters. Are they included in the installation media and if so what ones are compatible please?&lt;/p&gt;&#xA;" OwnerUserId="19634" LastEditorUserId="16827" LastEditDate="2019-12-07T09:33:54.857" LastActivityDate="2023-12-16T18:05:05.647" Title="What’s the reason for the missing WiFi drivers on install media?" Tags="|wifi|networking|drivers|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21339" PostTypeId="1" AcceptedAnswerId="21346" CreationDate="2019-12-04T15:45:24.383" Score="1" ViewCount="1423" Body="&lt;p&gt;elementary OS 5.1 just launched and I have 5.0 installed. I wish to know if it will be upgraded automatically running some command or with some native software of the OS.&lt;/p&gt;&#xA;" OwnerUserId="19636" LastEditorUserId="16827" LastEditDate="2019-12-07T07:00:25.010" LastActivityDate="2019-12-07T07:00:25.010" Title="Will elementary OS 5 Juno upgrade to 5.1 Hera automatically?" Tags="|updates|release-hera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21340" PostTypeId="1" CreationDate="2019-12-04T16:38:36.643" Score="0" ViewCount="74" Body="&lt;p&gt;I am trying to get elementary OS on an old white MacMini. The machine does not boot from USB and does not have a DVD drive. I have tried a USB DVD drive but that is not recognized. Is there a way to get a lite version that fits on a CD and then add everything later?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did have an early version of elementary OS on the machine but it never updated to the newer versions I don't know if it should so I deleted it and then found I can't install anything.&lt;/p&gt;&#xA;" OwnerUserId="19638" LastEditorUserId="16827" LastEditDate="2019-12-05T07:41:44.963" LastActivityDate="2023-12-14T13:03:10.347" Title="CD install on white MacMini" Tags="|release-juno|system-installation|boot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21341" PostTypeId="1" CreationDate="2019-12-04T16:39:20.380" Score="0" ViewCount="467" Body="&lt;p&gt;I am using Elementary OS 5.0 for a while. Today I just installed 5.1. In the appcenter the amount of the app is less than it should be. To give an example most common apps like Libreoffice, Octave, Spyder cannot be found in the appcenter. During whole day, I couldn't find any way to solve this. I am asking your help. Have a good day. Thank u for your interest. Here, the screenshot from the appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1iooi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1iooi.png&quot; alt=&quot;appcenter&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19639" LastEditorUserId="16827" LastEditDate="2019-12-07T07:04:01.420" LastActivityDate="2019-12-07T07:04:01.420" Title="Elementary OS 5.1 Appcenter Few Application" Tags="|appcenter|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21342" PostTypeId="1" CreationDate="2019-12-04T17:32:26.407" Score="0" ViewCount="74" Body="&lt;p&gt;elementary-website&#xA;на главной странице &quot;The fast, open, and privacy-respecting replacement for Windows and macOS&quot; и в заголовке&lt;/p&gt;&#xA;&#xA;&lt;p&gt;на странице установки &lt;a href=&quot;https://elementary.io/ru/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/ru/docs/installation#creating-an-installation-medium&lt;/a&gt; часть перевода так же отсутствует&lt;/p&gt;&#xA;" OwnerUserId="19642" LastActivityDate="2023-12-14T03:08:41.060" Title=".RU. Ребята. ну исправьте вы русский язык на странице России" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21344" PostTypeId="2" ParentId="21341" CreationDate="2019-12-04T18:46:21.013" Score="1" Body="&lt;p&gt;I just updated my home computer in Elementary OS 5.1 HERA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking for each of your application, on my laptop still under EOS 5.0 and my home computer under EOS 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I find exactly the same result on the appcenter to know&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;libreOffice&lt;/strong&gt; OK in 5.0 and 5.1&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YGrVy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YGrVy.png&quot; alt=&quot;app-center LibreOffice&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;GNU Octave&lt;/strong&gt; OK in 5.0 and 5.1&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MzVbo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MzVbo.png&quot; alt=&quot;app-center-octave&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Spyder&lt;/strong&gt; OK in 5.0 and 5.1&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2msXb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2msXb.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;checked the contents of your source list of the app center, now here is mine in my Elementary OS 5.1 HERA&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/apt/sources.list.d/appcenter.list&#xA;deb http://packages.elementary.io/appcenter bionic main&#xA;$ cat /etc/apt/sources.list.d/elementary.list&#xA;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;$ cat /etc/apt/sources.list.d/patches.list&#xA;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;NOTE : every screenshot comes from my Elementary OS 5.1 HERA&lt;/p&gt;&#xA;&#xA;&lt;p&gt;good day&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-04T22:21:36.240" LastActivityDate="2019-12-04T22:21:36.240" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21345" PostTypeId="2" ParentId="21339" CreationDate="2019-12-04T18:48:32.083" Score="2" Body="&lt;p&gt;It should upgrade automatically&lt;/p&gt;&#xA;" OwnerDisplayName="user18379" LastActivityDate="2019-12-04T18:48:32.083" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21346" PostTypeId="2" ParentId="21339" CreationDate="2019-12-04T18:51:39.123" Score="2" Body="&lt;p&gt;If you want to update elementary OS 5.0 to 5.1 you can use the classic manual method&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;$ sudo apt upgrade&#xA;$ sudo apt dist-upgrade&#xA;$ sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;check if you are in elementary OS 5.1 after reboot&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/os-release &#xA;NAME=&quot;elementary OS&quot;&#xA;VERSION=&quot;5.1 Hera&quot;&#xA;ID=elementary&#xA;ID_LIKE=ubuntu&#xA;PRETTY_NAME=&quot;elementary OS 5.1 Hera&quot;&#xA;LOGO=distributor-logo&#xA;VERSION_ID=&quot;5.1&quot;&#xA;HOME_URL=&quot;https://elementary.io/&quot;&#xA;SUPPORT_URL=&quot;https://elementary.io/support&quot;&#xA;BUG_REPORT_URL=&quot;https://github.com/elementary/os/issues/new&quot;&#xA;PRIVACY_POLICY_URL=&quot;https://elementary.io/privacy-policy&quot;&#xA;VERSION_CODENAME=hera&#xA;UBUNTU_CODENAME=bionic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;EDIT&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If your want to update your kernel you can do that&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check your kernel version&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r                                                                            &#xA;4.15.0-72-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update your kernel&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following additional packages will be installed:&#xA;  linux-headers-5.0.0-37 linux-headers-5.0.0-37-generic linux-headers-generic-hwe-18.04 linux-image-5.0.0-37-generic linux-image-generic-hwe-18.04&#xA;  linux-modules-5.0.0-37-generic linux-modules-extra-5.0.0-37-generic xserver-xorg-core-hwe-18.04 xserver-xorg-input-all-hwe-18.04 xserver-xorg-input-libinput-hwe-18.04&#xA;  xserver-xorg-legacy-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04 xserver-xorg-video-ati-hwe-18.04 xserver-xorg-video-fbdev-hwe-18.04&#xA;  xserver-xorg-video-intel-hwe-18.04 xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04 xserver-xorg-video-radeon-hwe-18.04&#xA;  xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04&#xA;Suggested packages:&#xA;  fdutils linux-hwe-doc-5.0.0 | linux-hwe-source-5.0.0 linux-hwe-tools xfonts-100dpi | xfonts-75dpi firmware-amd-graphics xserver-xorg-video-r128 xserver-xorg-video-mach64&#xA;  firmware-misc-nonfree&#xA;Recommended packages:&#xA;  xserver-xorg-input-wacom-hwe-18.04&#xA;The following packages will be REMOVED:&#xA;  xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-libinput xserver-xorg-input-wacom xserver-xorg-legacy&#xA;  xserver-xorg-video-all xserver-xorg-video-amdgpu xserver-xorg-video-ati xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-nouveau&#xA;  xserver-xorg-video-qxl xserver-xorg-video-radeon xserver-xorg-video-vesa xserver-xorg-video-vmware&#xA;The following NEW packages will be installed:&#xA;  linux-generic-hwe-18.04 linux-headers-5.0.0-37 linux-headers-5.0.0-37-generic linux-headers-generic-hwe-18.04 linux-image-5.0.0-37-generic linux-image-generic-hwe-18.04&#xA;  linux-modules-5.0.0-37-generic linux-modules-extra-5.0.0-37-generic xserver-xorg-core-hwe-18.04 xserver-xorg-hwe-18.04 xserver-xorg-input-all-hwe-18.04&#xA;  xserver-xorg-input-libinput-hwe-18.04 xserver-xorg-legacy-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04 xserver-xorg-video-ati-hwe-18.04&#xA;  xserver-xorg-video-fbdev-hwe-18.04 xserver-xorg-video-intel-hwe-18.04 xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04&#xA;  xserver-xorg-video-radeon-hwe-18.04 xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04&#xA;0 upgraded, 23 newly installed, 17 to remove and 0 not upgraded.&#xA;Need to get 69,9 MB of archives.&#xA;After this operation, 331 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n]&#xA;...&#xA;...&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;reboot your elementary OS&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;check your kernel version&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;5.0.0-37-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="308" LastEditDate="2019-12-06T06:29:32.857" LastActivityDate="2019-12-06T06:29:32.857" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="21348" PostTypeId="2" ParentId="21338" CreationDate="2019-12-04T18:58:03.920" Score="0" Body="&lt;p&gt;For your wifi card to work, you must check a case during the installation of Elementary OS (this is very often the case for many LINUX distribution)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Before the installation&lt;/em&gt; in the window &lt;strong&gt;Update and other software&lt;/strong&gt; you need check this option : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install third-party software for graphics Wi-Fi Hardware and additional media formats&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/klnKk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/klnKk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T18:58:03.920" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21349" PostTypeId="2" ParentId="21340" CreationDate="2019-12-04T19:05:06.483" Score="0" Body="&lt;p&gt;I confirm that there are many MAC Mini that did not have a DVD player&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mac Mini 2011 : &lt;a href=&quot;https://support.apple.com/kb/SP632?locale=fr_FR&amp;amp;viewlocale=en_US&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.apple.com/kb/SP632?locale=fr_FR&amp;amp;viewlocale=en_US&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if this is a tutorial form &lt;a href=&quot;https://askubuntu.com/users/431287/oemb1905&quot;&gt;oemb1905&lt;/a&gt;, for Ubuntu is present on this link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/885978/how-to-install-ubuntu-to-a-mac-mini-i7-2011-with-amd-graphics&quot;&gt;https://askubuntu.com/questions/885978/how-to-install-ubuntu-to-a-mac-mini-i7-2011-with-amd-graphics&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T19:05:06.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21350" PostTypeId="2" ParentId="21342" CreationDate="2019-12-04T19:23:08.197" Score="0" Body="&lt;p&gt;I use &lt;em&gt;Google translate&lt;/em&gt; for understand your message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I understand you need better translate in Ruissian in specific webpage, I think this link can help you:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/ru/docs/translation-guide#translation-guide&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/ru/docs/translation-guide#translation-guide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T19:23:08.197" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21351" PostTypeId="2" ParentId="21337" CreationDate="2019-12-04T19:28:04.763" Score="2" Body="&lt;p&gt;Olá,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently he would have to update the kernel, I answered someone a few minutes ago on another post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/21346/19360&quot;&gt;https://elementaryos.stackexchange.com/a/21346/19360&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Launch the terminal whithout mouse and shortcut for terminal&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;SUPER + Space&lt;/li&gt;&#xA;&lt;li&gt;Search terminal or the name of your terminal&lt;/li&gt;&#xA;&lt;li&gt;Follow instruction in the link to the top&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T19:28:04.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21353" PostTypeId="2" ParentId="21323" CreationDate="2019-12-04T19:37:59.783" Score="1" Body="&lt;p&gt;I already had this, did you try to make an update from the command line, usually it would disappear after&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;$ sudo apt upgrade&#xA;$ sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T19:37:59.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21354" PostTypeId="2" ParentId="20788" CreationDate="2019-12-04T20:20:39.757" Score="0" Body="&lt;p&gt;This feature has not been integrated unfortunately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some research I found a branch of the official github which allows to have a picture in wallpaper with the blur effect&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter/tree/blurred-background&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/tree/blurred-background&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T20:20:39.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21355" PostTypeId="2" ParentId="21047" CreationDate="2019-12-04T20:34:49.037" Score="1" Body="&lt;p&gt;&lt;strong&gt;STEP 1&lt;/strong&gt; : Create a new file in the launcher&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo touch /usr/share/applications/appname.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;STEP 2&lt;/strong&gt; : Edit this file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=App Name&#xA;Comment=Comment if you want&#xA;Icon=Path/icone&#xA;Terminal=false&#xA;Type=Application&#xA;StartupNotify=false&#xA;Categories=newcategorie1,newcategorie2 &amp;lt;===== create your categories here&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-04T20:34:49.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21356" PostTypeId="1" CreationDate="2019-12-04T21:29:57.393" Score="0" ViewCount="169" Body="&lt;p&gt;When I enter in my Gmail credentials it tells me that they are invalid. I do not have have two factor authentication activated on my account. I have tried several times with no luck&lt;/p&gt;&#xA;" OwnerUserId="19643" LastActivityDate="2019-12-04T22:55:50.137" Title="Cannot Connect to Gmail" Tags="|settings|" AnswerCount="1" CommentCount="1" ClosedDate="2019-12-05T07:21:37.850" ContentLicense="CC BY-SA 4.0" />
  <row Id="21357" PostTypeId="2" ParentId="21356" CreationDate="2019-12-04T22:55:50.137" Score="1" Body="&lt;p&gt;Use the instructions &lt;a href=&quot;https://myaccount.google.com/lesssecureapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; or &lt;a href=&quot;https://www.dev2qa.com/how-do-i-enable-less-secure-apps-on-gmail/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; to enable less secure applications to connect to your Google account. But it is generally encouraged to enable 2FA, and generate passwords on a per app basis.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-04T22:55:50.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21358" PostTypeId="1" CreationDate="2019-12-05T00:53:38.683" Score="0" ViewCount="293" Body="&lt;p&gt;Hardware minimum required for install elementary OS 5.0?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I install elementary OS Only 5.1 with Windows 10 installed on another partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can an 8 year old hardware install elementary OS 5.1?&lt;/p&gt;&#xA;" OwnerUserId="19645" LastEditorUserId="16827" LastEditDate="2019-12-06T05:14:10.690" LastActivityDate="2019-12-06T05:16:42.403" Title="Hardware minimum requerid?" Tags="|hardware|" AnswerCount="2" CommentCount="0" ClosedDate="2019-12-12T18:39:28.060" ContentLicense="CC BY-SA 4.0" />
  <row Id="21359" PostTypeId="2" ParentId="21358" CreationDate="2019-12-05T01:01:56.780" Score="2" Body="&lt;p&gt;The recommended spec : &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;4-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of RAM&lt;/li&gt;&#xA;&lt;li&gt;15 GB of free hard drive space (SSD is better)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;All informations here :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="19360" LastEditDate="2019-12-06T05:16:42.403" LastActivityDate="2019-12-06T05:16:42.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21360" PostTypeId="1" CreationDate="2019-12-05T01:19:15.997" Score="0" ViewCount="102" Body="&lt;p&gt;I can't get any bluetooth device to connect.  Not a single one.  Devices that worked a week ago no longer will.  All my bluetooth devices are listed but when I click &quot;Connect&quot; it will say &quot;Connecting....&quot; and then will go to &quot;Can't Connect&quot;  This is bad, this makes Elementary unsuitable for me as I a number of bluetooth devices I use.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I must stress this stuff used to work, now they don't.  This is not a good upgrade experience.&lt;/p&gt;&#xA;" OwnerUserId="3632" LastActivityDate="2019-12-24T15:49:25.387" Title="Bluetooth - not connecting" Tags="|bluetooth|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21361" PostTypeId="1" CreationDate="2019-12-05T03:06:20.690" Score="1" ViewCount="43" Body="&lt;p&gt;The title pretty much says it all. I've tried adjusting the gain with alsamixer to no avail. I am dual-booting alongside Windows 10 if that is relevant.&lt;/p&gt;&#xA;" OwnerUserId="19646" LastEditorUserId="308" LastEditDate="2019-12-19T19:09:11.110" LastActivityDate="2019-12-19T19:09:11.110" Title="How can I get rid of the static noise in my headphones on the Dell XPS-13 9360?" Tags="|dual-boot|audio|dell|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21362" PostTypeId="1" CreationDate="2019-12-05T05:00:40.890" Score="0" ViewCount="125" Body="&lt;p&gt;Every time i change the icons in hera everything just crashes i can reboot because there is no panel nor any shortcut works. I have to erase the icon folder from the terminal to be able to reboot and make the system work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad english.&lt;/p&gt;&#xA;" OwnerUserId="17887" LastEditorUserId="16827" LastEditDate="2019-12-07T06:56:23.187" LastActivityDate="2024-03-08T04:07:45.977" Title="Changing icons brakes everything in hera" Tags="|system|icons|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21364" PostTypeId="1" CreationDate="2019-12-05T13:34:27.253" Score="2" ViewCount="474" Body="&lt;p&gt;After I created a standard user account, unable to login with that user account. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Admin account has no problem logging in. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;any suggestion? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you.  &lt;/p&gt;&#xA;" OwnerUserId="19655" LastEditorUserId="16827" LastEditDate="2019-12-07T07:00:10.427" LastActivityDate="2023-12-31T05:04:45.620" Title="Elementary 5.1 Hera. Unable to login with standard user account" Tags="|greeter|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21365" PostTypeId="2" ParentId="16065" CreationDate="2019-12-05T15:06:56.450" Score="0" Body="&lt;p&gt;What I reccomend you to do is to completely remove and reinstall the Nvidia drivers with the proprietary ones. You can do this into &lt;strong&gt;Recovery mode&lt;/strong&gt; - on the Grub boot screen select &lt;strong&gt;Advanced options for elementary os&lt;/strong&gt;, then the first kernel version ot top with &lt;strong&gt;[Recovery mode]&lt;/strong&gt;  into it. Once the menu loads select first to configure network and then drop into the root terminal. &#xA;Into the console there :&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Type &lt;code&gt;apt update&lt;/code&gt; in order to see if your network is successfully enabled&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;!!! Continue &lt;strong&gt;ONLY&lt;/strong&gt; if you see normal update process with no errors. If you have no network connection removing the Nvidia drivers may lead to bigger problems, because you will not be able to install new ones.&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Type &lt;code&gt;apt remove --purge nvidia*&lt;/code&gt; in order to remove all Nvidia settings and packages you have installed already&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install software-properties-common package in order to add repositories: &#xA;&lt;code&gt;apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the proprietary repository &lt;code&gt;add-apt-repository ppa:graphics-drivers/ppa&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Execute &lt;code&gt;apt update&lt;/code&gt; to refresh packages information&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install recommended nvidia driver by typing &lt;code&gt;ubuntu-drivers autoinstall&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Reboot when everything is finnished by typing &lt;code&gt;reboot&lt;/code&gt; into the console.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More info about the repository mentioned above - &lt;a href=&quot;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~graphics-drivers/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-05T15:06:56.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21367" PostTypeId="2" ParentId="12423" CreationDate="2019-12-05T18:21:41.003" Score="0" Body="&lt;p&gt;&lt;strong&gt;Old answer but for the second question :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nice to know you started linux. I wanted to exploit as much as possible the Touchpad of my Dell XPS 13 laptop with multi-finger motion function.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So here is a tool that I use now with my laptop daily&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/bulletmark/libinput-gestures&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bulletmark/libinput-gestures&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Having automated this task for the installation of Elementary OS on one of my GITHUB repository.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;SCRIPT&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Add the actual user in the input group&#xA;sudo gpasswd -a $USER input&#xA;&#xA;# install dependencies&#xA;sudo apt install xdotool wmctrl&#xA;&#xA;# install other dependancies for Elementary OS (Ubuntu)&#xA;sudo apt install libinput-tools&#xA;&#xA;# Clone the repo&#xA;git clone https://github.com/bulletmark/libinput-gestures.git&#xA;&#xA;# Change dorictory&#xA;cd libinput-gestures&#xA;&#xA;# Install&#xA;sudo make install&#xA;&#xA;# Chnage dorictory to HOME USER&#xA;cd&#xA;&#xA;# Remove directory&#xA;sudo rm -rf libinput-gestures&#xA;&#xA;# enable autostart the service&#xA;libinput-gestures-setup autostart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;is better if your reboot after&lt;/p&gt;&#xA;&#xA;&lt;p&gt;enjoy&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-05T21:11:28.370" LastActivityDate="2019-12-05T21:11:28.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21368" PostTypeId="2" ParentId="21358" CreationDate="2019-12-05T19:00:17.313" Score="1" Body="&lt;p&gt;&lt;strong&gt;&lt;em&gt;Hardware minimum requerid for install Elementary OS 5.0?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your are all informations here : &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Can I install Elementary OS Only 5.1 with Windows 10 installed on another partition?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes you can and you have the choice during the installation&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install alongside Windows 10&lt;/li&gt;&#xA;&lt;li&gt;Somthing else if you want to do an advanced installation, such as&#xA;installing on a different hard drive or partition&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/u1Ct7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u1Ct7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Can an 8 year old hardware install Elementory SO 5.1?&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes you can try. I recommand you to do a test with a live USB CD&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-05T21:08:05.520" LastActivityDate="2019-12-05T21:08:05.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21370" PostTypeId="1" CreationDate="2019-12-05T19:11:04.627" Score="1" ViewCount="90" Body="&lt;p&gt;How do I get AppCenter to stop trying to download/install Thunderbird?&#xA;I just installed elementary 5.1 using VMWare Fusion 11.5.1 on a Macbook Pro running Mojave 10.14.6 I went to AppCenter to download/install Thunderbird. After selecting Thunderbird, AppCenter now says waiting for authentication but there is no authentication screen. AppCenter is showing a spinning icon next to the search window.&lt;/p&gt;&#xA;" OwnerUserId="16019" LastEditorUserId="16827" LastEditDate="2019-12-11T12:01:01.470" LastActivityDate="2023-12-20T21:07:40.907" Title="How do I get AppCenter to stop trying to download/install Thunderbird?" Tags="|appcenter|macbook|release-hera|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21371" PostTypeId="2" ParentId="21370" CreationDate="2019-12-05T19:23:38.713" Score="0" Body="&lt;p&gt;Try install Thunderbird with command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;maybe that will fix your problem&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-05T19:23:38.713" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21372" PostTypeId="1" CreationDate="2019-12-05T21:54:30.573" Score="0" ViewCount="968" Body="&lt;p&gt;I have just installed Elementary OS 5.1 and, while browsing the Internet, all tabs in Epiphany show &amp;quot;Oops Something went wrong while displaying this page&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;After refreshing it was fine for a moment. I then went on to close the browser and had a look around the OS only to realise that I needed something from Amazon and went to &lt;a href=&quot;https://www.amazon.co.uk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.amazon.co.uk&lt;/a&gt;, but I cannot load the site.&lt;/p&gt;&#xA;&lt;p&gt;What I see is — for about 1-2 seconds — the Amazon front page and then the white page with the “Oops - Something went wrong while displaying this page” error.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know a fix for this?&lt;/p&gt;&#xA;&lt;p&gt;Firefox is rock solid.&lt;/p&gt;&#xA;&lt;p&gt;Ping looks good:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;--- amazon.co.uk ping statistics ---&#xA;20 packets transmitted, 20 received, 0% packet loss, time 19033ms&#xA;rtt min/avg/max/mdev = 23.708/29.337/41.284/4.366 ms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19666" LastEditorUserId="25612" LastEditDate="2023-05-05T15:12:14.030" LastActivityDate="2024-01-30T16:07:45.960" Title="Epiphany shows Oops Something went wrong while displaying this page" Tags="|epiphany|crash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21373" PostTypeId="1" CreationDate="2019-12-05T22:15:55.013" Score="0" ViewCount="91" Body="&lt;p&gt;I'll recorded this issue or my badness ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I quick switch to a new app without changing desktop or closing all? &lt;kbd&gt;ALT&lt;/kbd&gt; + &lt;kbd&gt;TAB&lt;/kbd&gt; is not really an solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Heres the unlisted Video and sorry for my bad english ...&#xA;&lt;a href=&quot;https://youtu.be/vo5AsTwnYhQ&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/vo5AsTwnYhQ&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings from Austria (no kangoroos)&lt;/p&gt;&#xA;" OwnerUserId="19662" LastEditorUserId="19360" LastEditDate="2019-12-10T02:15:01.067" LastActivityDate="2023-12-19T14:01:55.233" Title="Dock! Fullscreen games and then do you want into a new app" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21374" PostTypeId="1" AcceptedAnswerId="21376" CreationDate="2019-12-05T22:36:40.067" Score="1" ViewCount="1583" Body="&lt;p&gt;I've updated my system, but it didn't update the kernel. Please see the output of my commands: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;loathe@elementaryos ~&amp;gt; lsb_release --all &#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.1 Hera&#xA;Release:    5.1&#xA;Codename:   hera&#xA;loathe@elementaryos ~&amp;gt; uname -r&#xA;4.15.0-72-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running &quot;apt update&quot;, it says my packages are up to date. How can I update the kernel, and any other packages if they should be updated too(didn't check other packages besides the kernel)?&lt;/p&gt;&#xA;" OwnerUserId="14485" LastEditorUserId="16827" LastEditDate="2019-12-07T06:58:03.627" LastActivityDate="2019-12-07T14:54:51.860" Title="Kernel version is still 4.15, after upgrading to 5.1 Hera" Tags="|updates|kernel|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21376" PostTypeId="2" ParentId="21374" CreationDate="2019-12-05T23:02:38.047" Score="4" Body="&lt;p&gt;According to the &lt;a href=&quot;https://blog.elementary.io/introducing-elementary-os-5-1-hera/&quot; rel=&quot;nofollow noreferrer&quot;&gt;announcement blog post&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;…if you’re on an existing Juno install and would like or need the improved hardware support, you can install it from Terminal with the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-06T06:36:58.517" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21377" PostTypeId="2" ParentId="21373" CreationDate="2019-12-06T00:09:23.833" Score="0" Body="&lt;p&gt;If I understand well you are trying to switch from a fullscreen app to another app aren't you? If it is the case, the Alt+tab would not help you because when an app goes fullscreen the os automatically moves it to another space but alt+tab is a keyboard shrotcut to swtitch applications on the current space only. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this case what you want to achieve is to switch the space, and for this reason you have to use &lt;strong&gt;Super+Tab&lt;/strong&gt; keyboard shortcut. Another options are &lt;strong&gt;Super+a&lt;/strong&gt;, &lt;strong&gt;Super+s&lt;/strong&gt; and &lt;strong&gt;Super+w&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Super = windows like key on your windows keyboard or Cmd if you are on a mac. By default if you press only the Super key it triggers  a command that shows available keyboard shortcuts.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-06T07:43:05.060" LastActivityDate="2019-12-06T07:43:05.060" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21379" PostTypeId="1" CreationDate="2019-12-06T00:33:49.407" Score="1" ViewCount="557" Body="&lt;p&gt;I'm somewhat new to linux, and I was hoping someone would be able to help. I would like to install pCloud drive, and I followed the instructions on the site &lt;a href=&quot;https://www.techrepublic.com/article/how-to-install-and-use-the-pcloud-desktop-client/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. However this doesn't seem to work, when I run &amp;quot;sudo ./pcloud&amp;quot; the terminal hangs at the following:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dks@Phobos:~/Downloads$ sudo ./pcloud&lt;/p&gt;&#xA;&lt;p&gt;Down: Everything Downloaded| Up: Everything Uploaded, status is SCANNING&lt;/p&gt;&#xA;&lt;p&gt;Update for linux-x64-prod-v1.7.1 is not available&lt;/p&gt;&#xA;&lt;p&gt;Down: Everything Downloaded| Up: Everything Uploaded, status is READY&lt;/p&gt;&#xA;&lt;p&gt;(pcloud:3274): libappindicator-WARNING **: 19:22:30.549: Unable to get the session bus: Unknown or unsupported transport “disabled” for address “disabled:”&lt;/p&gt;&#xA;&lt;p&gt;(pcloud:3274): LIBDBUSMENU-GLIB-WARNING **: 19:22:30.549: Unable to get session bus: Unknown or unsupported transport “disabled” for address “disabled:”&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I did get the login screen, but upon logging in my pCloud folder was unreadable and it gave me the following popup error&#xA;&lt;a href=&quot;https://i.stack.imgur.com/EdMn8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EdMn8.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I attempted to manually uninstall pCloud to try again, but I wasn't successful. Whenever I try to navigate to the pCloud folder via the Files app, the folder won't open. However, whenever I navigate through something else (for example Code), I &lt;em&gt;can&lt;/em&gt; see the file structure and even open the files.&lt;/p&gt;&#xA;&lt;p&gt;What's going on? Has anyone done this successfully?&lt;/p&gt;&#xA;" OwnerUserId="19620" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-06T02:06:12.610" Title="Installing pCloud drive" Tags="|software-installation|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21380" PostTypeId="2" ParentId="21372" CreationDate="2019-12-06T01:08:17.300" Score="0" Body="&lt;p&gt;That means the web process has crashed. To diagnose crashes, developers need to see a backtrace of the crash taken with gdb. Sadly, I believe elementary doesn't have any tools to report the crash automatically, so you will have to learn to do it manually if you want the developers to look at the issue. After verifying that you are running the latest stable version of WebKitGTK (currently 2.26.2), &lt;a href=&quot;https://wiki.gnome.org/Community/GettingInTouch/Bugzilla/GettingTraces&quot; rel=&quot;nofollow noreferrer&quot;&gt;get a quality backtrace&lt;/a&gt; for the crash using &lt;code&gt;coredumpctl gdb&lt;/code&gt; (installing any required debuginfo), then report it on &lt;a href=&quot;https://bugs.webkit.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;WebKit Bugzilla&lt;/a&gt; against the WebKitGTK component. Prefix the bug title with [GTK].&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-12-06T01:08:17.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21382" PostTypeId="2" ParentId="21374" CreationDate="2019-12-06T01:32:26.937" Score="1" Body="&lt;p&gt;For Elementary OS 5.1 you need to update your kernel like this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Check your kernel version&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r                                                                            &#xA;4.15.0-72-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update your kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following additional packages will be installed:&#xA;  linux-headers-5.0.0-37 linux-headers-5.0.0-37-generic linux-headers-generic-hwe-18.04 linux-image-5.0.0-37-generic linux-image-generic-hwe-18.04&#xA;  linux-modules-5.0.0-37-generic linux-modules-extra-5.0.0-37-generic xserver-xorg-core-hwe-18.04 xserver-xorg-input-all-hwe-18.04 xserver-xorg-input-libinput-hwe-18.04&#xA;  xserver-xorg-legacy-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04 xserver-xorg-video-ati-hwe-18.04 xserver-xorg-video-fbdev-hwe-18.04&#xA;  xserver-xorg-video-intel-hwe-18.04 xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04 xserver-xorg-video-radeon-hwe-18.04&#xA;  xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04&#xA;Suggested packages:&#xA;  fdutils linux-hwe-doc-5.0.0 | linux-hwe-source-5.0.0 linux-hwe-tools xfonts-100dpi | xfonts-75dpi firmware-amd-graphics xserver-xorg-video-r128 xserver-xorg-video-mach64&#xA;  firmware-misc-nonfree&#xA;Recommended packages:&#xA;  xserver-xorg-input-wacom-hwe-18.04&#xA;The following packages will be REMOVED:&#xA;  xserver-xorg xserver-xorg-core xserver-xorg-input-all xserver-xorg-input-evdev xserver-xorg-input-libinput xserver-xorg-input-wacom xserver-xorg-legacy&#xA;  xserver-xorg-video-all xserver-xorg-video-amdgpu xserver-xorg-video-ati xserver-xorg-video-fbdev xserver-xorg-video-intel xserver-xorg-video-nouveau&#xA;  xserver-xorg-video-qxl xserver-xorg-video-radeon xserver-xorg-video-vesa xserver-xorg-video-vmware&#xA;The following NEW packages will be installed:&#xA;  linux-generic-hwe-18.04 linux-headers-5.0.0-37 linux-headers-5.0.0-37-generic linux-headers-generic-hwe-18.04 linux-image-5.0.0-37-generic linux-image-generic-hwe-18.04&#xA;  linux-modules-5.0.0-37-generic linux-modules-extra-5.0.0-37-generic xserver-xorg-core-hwe-18.04 xserver-xorg-hwe-18.04 xserver-xorg-input-all-hwe-18.04&#xA;  xserver-xorg-input-libinput-hwe-18.04 xserver-xorg-legacy-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04 xserver-xorg-video-ati-hwe-18.04&#xA;  xserver-xorg-video-fbdev-hwe-18.04 xserver-xorg-video-intel-hwe-18.04 xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04&#xA;  xserver-xorg-video-radeon-hwe-18.04 xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04&#xA;0 upgraded, 23 newly installed, 17 to remove and 0 not upgraded.&#xA;Need to get 69,9 MB of archives.&#xA;After this operation, 331 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n]&#xA;...&#xA;...&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;reboot your Elementary OS&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;check your kernel version&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ uname -r&#xA;5.0.0-37-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Here the result with about :&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fCm7l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fCm7l.png&quot; alt=&quot;elementaryos_about&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-07T14:54:51.860" LastActivityDate="2019-12-07T14:54:51.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21383" PostTypeId="2" ParentId="21379" CreationDate="2019-12-06T02:06:12.610" Score="1" Body="&lt;p&gt;After some test in my Elementary OS 5.1 maybe you need have this packages&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the line&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;(pcloud:3274): libappindicator-WARNING **: 19:22:30.549: Unable to get&#xA;  the session bus: Unknown or unsupported transport “disabled” for&#xA;  address “disabled:”&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg -s  libappindicator1&#xA;Package: libappindicator1&#xA;Status: install ok installed&#xA;Priority: optional&#xA;Section: libs&#xA;Installed-Size: 76&#xA;Maintainer: Ubuntu Desktop Team &amp;lt;ubuntu-desktop@lists.ubuntu.com&amp;gt;&#xA;Architecture: amd64&#xA;Source: libappindicator&#xA;Version: 12.10.1+18.04.20180322.1-0ubuntu1&#xA;Depends: libc6 (&amp;gt;= 2.4), libdbusmenu-glib4 (&amp;gt;= 0.4.2), libdbusmenu-gtk4 (&amp;gt;= 0.4.2), libglib2.0-0 (&amp;gt;= 2.37.3), libgtk2.0-0 (&amp;gt;= 2.24.31), libindicator7 (&amp;gt;= 0.4.90)&#xA;Pre-Depends: multiarch-support&#xA;Suggests: indicator-application (&amp;gt;= 0.2.93)&#xA;Description: Application Indicators&#xA; A library and indicator to take menus from applications and place them in&#xA; the panel.&#xA; .&#xA; This package contains shared libraries to be used by applications.&#xA;Homepage: https://launchpad.net/libappindicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;and for the other line&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;(pcloud:3274): LIBDBUSMENU-GLIB-WARNING **: 19:22:30.549: Unable to&#xA;  get session bus: Unknown or unsupported transport “disabled” for&#xA;  address “disabled:”&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg -s   libdbusmenu-glib4:amd64 &#xA;Package: libdbusmenu-glib4&#xA;Status: install ok installed&#xA;Priority: optional&#xA;Section: libs&#xA;Installed-Size: 145&#xA;Maintainer: Ubuntu Developers &amp;lt;ubuntu-devel-discuss@lists.ubuntu.com&amp;gt;&#xA;Architecture: amd64&#xA;Multi-Arch: same&#xA;Source: libdbusmenu&#xA;Version: 16.04.1+18.04.20171206-0ubuntu2&#xA;Description: library for passing menus over DBus&#xA; libdbusmenu passes a menu structure across DBus so that a program can&#xA; create a menu simply without worrying about how it is displayed on the&#xA; other side of the bus.&#xA; .&#xA; This package contains shared libraries to be used by applications.&#xA;Homepage: https://launchpad.net/dbusmenu&#xA;Original-Maintainer: The Ayatana Packagers &amp;lt;pkg-ayatana-devel@lists.alioth.debian.org&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install libdbusmenu-glib4:amd64 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-06T02:06:12.610" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21384" PostTypeId="1" CreationDate="2019-12-06T02:26:23.350" Score="1" ViewCount="70" Body="&lt;p&gt;So it started happening after I installed 5.1 and updated the kernel to 5.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Always when i close the lid it suspended and when i opened back i showed me lock screen now it doesnt show the lock screen, i have to press the power button to show me the lock screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another thing is that if i leave the lid closed for more than 30 minutes it doenst wake up even if i press the power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop has a led that shows if the laptop is powered on and when it suspended the led blinked on and off but now it just stays on always even if the laptop is suspended&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad english&lt;/p&gt;&#xA;" OwnerUserId="17887" LastActivityDate="2019-12-06T04:19:24.527" Title="Not waking up after closing the lid" Tags="|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21385" PostTypeId="2" ParentId="21384" CreationDate="2019-12-06T03:03:36.287" Score="1" Body="&lt;p&gt;I went back to an older kernel and it fixed everything&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4.15.0-72-generic&lt;/p&gt;&#xA;" OwnerUserId="17887" LastActivityDate="2019-12-06T03:03:36.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21386" PostTypeId="1" CreationDate="2019-12-06T03:25:26.987" Score="0" ViewCount="373" Body="&lt;p&gt;I am new to linux. I have been using elementary OS for about 15 days now. Everything was fine until few days ago when suddenly I could not connect to ubuntu repositories. &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Using the &quot;select best server&quot; in softwares &amp;amp; updates does not work&lt;/li&gt;&#xA;&lt;li&gt;Manually adding ubuntu repositories with sudo add-apt-repository does not work.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The following is the result of sudo apt update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: Failed to fetch &lt;a href=&quot;http://archive.ubuntu.com/ubuntu/dists/bionic/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://archive.ubuntu.com/ubuntu/dists/bionic/InRelease&lt;/a&gt;  Connection failed [IP: 91.189.88.149 80]&#xA;W: Some index files failed to download. They have been ignored, or old ones used instead.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;But if I ping 91.189.88.149, I get reply.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="19547" LastEditorUserId="16827" LastEditDate="2020-01-01T05:22:51.593" LastActivityDate="2020-01-01T05:22:51.593" Title="archive.ubuntu.com connection failed.. all other repositories( Elementary and other ppas) working" Tags="|updates|release-hera|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21387" PostTypeId="1" AcceptedAnswerId="26645" CreationDate="2019-12-06T04:07:38.270" Score="1" ViewCount="318" Body="&lt;p&gt;Trying Elementary Hera - ran the email program, was told my mail server certificate was untrusted, got prompted to trust it, when I did so, there was a long delay after which the error&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Couldn't find a place to store the pinned certificate&lt;/p&gt;&#xA;&#xA;&lt;p&gt;was displayed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="18945" LastEditorUserId="16827" LastEditDate="2019-12-07T07:04:46.593" LastActivityDate="2021-04-08T22:02:25.380" Title="How do I fix the error &quot;couldn't find a place to store the pinned certificate&quot;" Tags="|pantheon-mail|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21388" PostTypeId="2" ParentId="21384" CreationDate="2019-12-06T04:19:24.527" Score="1" Body="&lt;p&gt;I had a problem very similar to this so I downgraded the kernel and xorg hwe package and installed the generic 5.4.1 kernel using Ukuu and so far it works flawlessly. It turns out my issue was related to the xorg hwe updates and not the newer kernel.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-06T04:19:24.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21390" PostTypeId="1" CreationDate="2019-12-06T05:55:47.530" Score="1" ViewCount="142" Body="&lt;p&gt;Trying to install on my new laptop and I am getting the following error upon trying add a partition:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &quot;/usr/lib/ubiquity/plugins/ubi-partman.py&quot;, line 1298, in on_partition_list_new_activate&#xA;    self.partman_dialog(devpart, partition)&#xA;  File &quot;/usr/lib/ubiquity/ubiquity/plugin.py&quot;, line 48, in wrapper&#xA;    return target(self, *args, **kwargs)&#xA;  File &quot;/usr/lib/ubiquity/plugins/ubi-partman.py&quot;, line 961, in partman_dialog&#xA;    if create and partition['parted']['type'] == 'pri/log':&#xA;TypeError: 'NoneType' object is not subscriptable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="19673" LastEditorUserId="308" LastEditDate="2019-12-19T01:05:36.480" LastActivityDate="2021-02-20T05:50:30.197" Title="Can't install elementary OS 5.1 on Acer Predator Helios 300" Tags="|system-installation|release-hera|acer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21391" PostTypeId="1" CreationDate="2019-12-06T05:56:44.983" Score="0" ViewCount="360" Body="&lt;p&gt;How do you remove the last and only email account remaining in the Mail app? I tried uninstalling and reinstalling it but, the account is still there. Moreover the account cannot be removed via the Accounts pane &lt;em&gt;(Ctrl + M)&lt;/em&gt; as the &lt;code&gt;-&lt;/code&gt; is grayed out and not clickable.&lt;/p&gt;&#xA;" OwnerUserId="19481" LastActivityDate="2020-05-04T19:04:07.977" Title="How to remove last account from mail app?" Tags="|pantheon-mail|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21392" PostTypeId="2" ParentId="20788" CreationDate="2019-12-06T06:34:01.853" Score="2" Body="&lt;p&gt;The new greeter was designed specifically to address several user-reported issues and complaints with the old design. One major piece of feedback from many users was that the fullscreen wallpaper made other aspects of the greeter less than accessible to them. Another bit of feedback was that it was hard to quickly see multiple users at a glance, especially when many users don't set a custom user avatar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The new design instead shows users' wallpapers on cards, allowing several to be seen at once. The neutral background ensures the clock always remains legible and contrast-compliant.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We are open to further feedback on the design, and I personally have been experimenting with a &lt;a href=&quot;https://github.com/elementary/greeter/pull/374&quot; rel=&quot;nofollow noreferrer&quot;&gt;version of the greeter&lt;/a&gt; that makes the user cards larger on larger displays. But it is unlikely that we will change the design back to the problematic all-screen wallpaper design from before.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-06T06:34:01.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21393" PostTypeId="2" ParentId="21391" CreationDate="2019-12-06T06:42:27.287" Score="1" Body="&lt;p&gt;Delete mail account folder in ~/.local/share/pantheon-mail/&lt;/p&gt;&#xA;" OwnerUserId="19143" LastActivityDate="2019-12-06T06:42:27.287" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21394" PostTypeId="2" ParentId="29" CreationDate="2019-12-06T07:16:42.147" Score="0" Body="&lt;p&gt;elementary OS 5 Juno and later does not have a “system tray” or support app indicators, as this is a decade-deprecated API and has been replaced with more useful, purposeful APIs like CloudProviders. You can read about all of that in this &lt;a href=&quot;https://medium.com/elementaryos/developer-tips-backgrounding-system-integration-31c1f7226606&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary blog post&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Dropbox is a proprietary app, only Dropbox themselves can update their app to support modern APIs that are used by desktops like elementary OS and GNOME. Alternatively, someone could apply for a developer API key and attempt to make an open source Dropbox front-end that integrates with these modern APIs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Until one of those happens, there is no supported way to get better Dropbox integration into elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-06T07:16:42.147" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21395" PostTypeId="1" AcceptedAnswerId="21880" CreationDate="2019-12-06T08:08:33.460" Score="2" ViewCount="261" Body="&lt;p&gt;My issue is identical to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4021/app-icon-is-not-merged-in-the-dock&quot;&gt;this one&lt;/a&gt;, and it did solve my issue when I changed the logo from .png to .ico in .desktop. However, a restart/log-out session would render the solution void. As you can see from my screenshot below, I have the image extension as .ico, my StartupWMClass is also correct, but on the plank, there is still a Pocket Casts icon and a active grey gear icon. The two should merge.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I edit the image in the .desktop file again, it became normal again. But I would have to do it every single time I log-out or restarts. It would be nice to have a permanent solution. The issue has been persistent since 5.0 months ago, I have tried different Pocket Casts linux apps and they all have this issue. I have not encounter this issue in any other app as of yet (I didn't install many).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Pocket Casts pinned, but it's the same if I unpinned and start from the application menu. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sfoN9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sfoN9.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19678" LastActivityDate="2020-01-10T03:48:30.927" Title="Plank does not emerge icons" Tags="|plank|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21396" PostTypeId="1" CreationDate="2019-12-06T09:50:37.933" Score="1" ViewCount="19" Body="&lt;p&gt;Is there any way to disable notifications on suspend so that my MacBook won't constantly wake up and drain the battery while it's sitting closed and idle?&lt;/p&gt;&#xA;" OwnerUserId="16495" LastActivityDate="2019-12-06T09:50:37.933" Title="Notifications wake my MacBook Pro after it's been closed and suspended" Tags="|macbook|notifications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21397" PostTypeId="2" ParentId="21391" CreationDate="2019-12-06T13:24:46.840" Score="0" Body="&lt;p&gt;OK, I managed to get it fixed. I was able to delete the only email account in the mail app by removing the &lt;code&gt;pantheon-mail&lt;/code&gt; package via the terminal using &lt;code&gt;sudo apt-get --remove pantheon-mail&lt;/code&gt;. This change however, was not reflected in the elementary OS AppCenter, as the mail app was still showing up as installed. Upon clicking the &lt;strong&gt;Uninstall&lt;/strong&gt; button I got an error. So I used &lt;code&gt;sudo apt-get -f install pantheon mail&lt;/code&gt; to get the app installed back on the system, and fortunately this resulted in the app being in it's initial state &lt;em&gt;(having no email accounts)&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So weird that they don't let you delete an email account if it's the only one. Does anyone know of a logical reason for that?&lt;/p&gt;&#xA;" OwnerUserId="19481" LastEditorUserId="19481" LastEditDate="2019-12-06T14:00:31.947" LastActivityDate="2019-12-06T14:00:31.947" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21398" PostTypeId="1" CreationDate="2019-12-06T13:52:05.837" Score="0" ViewCount="148" Body="&lt;p&gt;I've found multiple guides (e.g. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13116/super-key-only-for-window-overview-elementaryos&quot;&gt;this&lt;/a&gt;) detailing how to map the &quot;Overview of all windows&quot; onto the Super key. I've used following approach:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter overlay-key &quot;'Super_L'&quot;&#xA;gsettings set org.pantheon.desktop.gala.behavior overlay-action &quot;'xdotool key super+w'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I have the window overview open, then I can't close it again with the Super key. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is unlike the behaviour of the actual keyboard command (super+w) which opens the overview on the first tap and closes on the second.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I achieve this functionality on ONLY the super key?&lt;/p&gt;&#xA;" OwnerUserId="19681" LastActivityDate="2023-12-19T11:02:30.370" Title="Super Key = Overview of all Windows - but its not closing on second press" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21400" PostTypeId="2" ParentId="8187" CreationDate="2019-12-06T16:41:25.233" Score="0" Body="&lt;p&gt;As of (at least) elementary OS 5 Juno and later, artist information is shown on hover in the Desktop settings. More information about each wallpaper can also be found in &lt;a href=&quot;https://github.com/elementary/wallpapers/blob/deb-packaging/debian/copyright&quot; rel=&quot;nofollow noreferrer&quot;&gt;the GitHub repo&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/BEYF0.png&quot; alt=&quot;Screenshot of Wallpapers&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-06T16:41:25.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21401" PostTypeId="1" CreationDate="2019-12-06T17:04:45.510" Score="0" ViewCount="288" Body="&lt;p&gt;Everything looks goods on new elementary OS (v5.1) on my Surface Laptop. But facing issue with laptop's keyboard, It does not work (everything fine on external keyboard). Any one can support this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&#xA;Alessio&lt;/p&gt;&#xA;" OwnerUserId="19687" LastEditorUserId="16827" LastEditDate="2019-12-07T09:31:56.573" LastActivityDate="2024-01-15T14:07:15.887" Title="Keyboard on Surface Laptop does not work" Tags="|surface-tablet|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21403" PostTypeId="1" CreationDate="2019-12-06T20:26:14.083" Score="2" ViewCount="404" Body="&lt;p&gt;I'm running elementary (Hera) on a small 11&quot; widescreen laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd like to have wingpanel either hidden or on the side of the screen so I don't lose any vertical space for working. Is that something that's doable?&lt;/p&gt;&#xA;" OwnerUserId="19689" LastEditorUserId="16827" LastEditDate="2019-12-07T07:00:00.780" LastActivityDate="2023-12-16T13:07:25.890" Title="How to hide wingpanel or move to the side?" Tags="|wingpanel|desktop|release-hera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21404" PostTypeId="1" AcceptedAnswerId="21406" CreationDate="2019-12-06T22:10:32.137" Score="3" ViewCount="11341" Body="&lt;p&gt;I've installed two Flatpak apps with sideload, and they never got icons and I cannot start them. What should I do? It was Spotify and Discord. Is this a general limitation of elementary OS?&lt;/p&gt;&#xA;&lt;p&gt;Edit: The apps worked fine until I closed them&lt;/p&gt;&#xA;" OwnerUserId="19692" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:37.533" LastActivityDate="2023-11-18T18:40:37.533" Title="Flatpak apps not showing up in app menu" Tags="|thirdpartyapps|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21405" PostTypeId="2" ParentId="21403" CreationDate="2019-12-06T22:44:59.043" Score="0" Body="&lt;p&gt;This is not yet incorporated&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try test this : &lt;a href=&quot;https://github.com/mlibre/hide-wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mlibre/hide-wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-06T22:44:59.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21406" PostTypeId="2" ParentId="21404" CreationDate="2019-12-06T23:22:49.677" Score="5" Body="&lt;p&gt;This is probably a bug that will be fixed soon. In the meantime you can launch Flatpak applications from the terminal. First execute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to get the list of you applications. Then run your chosen application (ie. &lt;code&gt;org.example.app&lt;/code&gt;) by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak run org.example.app&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;If you want to add the application to your application menu by hand, you need to find its &lt;code&gt;.desktop&lt;/code&gt; file and copy it to &lt;code&gt;~/.local/share/applications&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/.local/share/flatpak/app&#xA;cd org.example.app&#xA;cd current/active/files/share/applications/&#xA;cp -a . ~/.local/share/applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Icons should appear in the Application Menu immediately.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2019-12-07T10:31:18.750" LastActivityDate="2019-12-07T10:31:18.750" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21407" PostTypeId="1" CreationDate="2019-12-07T01:07:08.693" Score="2" ViewCount="114" Body="&lt;p&gt;The account routes through a local bridge service that decrypts/encrypts protonmail messages. Following protonmail's instructions, I added an account for my primary email &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The account routes through a local bridge service that decrypts/encrypts protonmail messages. Following protonmail's instructions, I added an account for my primary email address account with protonmail, to the bridge. Then I pointed the email client's IMAP and SMTP to the local port 127.0.0.1 to ports 1143 and 1025 respectively, for a given email address (robert.withers@pm.me) and I used the bridge generated password to access those services on the bridge. This is correct setup for the Protonmail Bridge. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, I am able to get a list of existing emails for a selected folder until several minutes pass and I am still unable to see the content of a selected email.&lt;/p&gt;&#xA;" OwnerUserId="19688" LastEditorUserId="19688" LastEditDate="2019-12-07T01:36:40.393" LastActivityDate="2019-12-07T01:36:40.393" Title="I added accounts to my Elementary email client. Client does not show email content" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21408" PostTypeId="1" CreationDate="2019-12-07T02:20:19.073" Score="0" ViewCount="163" Body="&lt;p&gt;I am trying to edit MP3 tag data in Music.  I get into the edit screen, edit the info.  I click &quot;Save&quot; and.... nothing.  The edit isn't saved.  I have tried on multiple files and it doesn't work on any of them.&lt;/p&gt;&#xA;" OwnerUserId="3632" LastActivityDate="2019-12-07T12:42:25.297" Title="Editing MP3 Tag in Music" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21409" PostTypeId="1" CreationDate="2019-12-07T02:42:04.147" Score="0" ViewCount="40" Body="&lt;p&gt;On a Toshiba  Satellite C75D-B7260. I can not figure out how to get the driver for this model.Or if that is the problem. Thanks &lt;/p&gt;&#xA;" OwnerUserId="19693" LastEditorUserId="16827" LastEditDate="2019-12-07T09:33:08.620" LastActivityDate="2023-12-23T07:00:50.093" Title="Can't activate wireless from WingPanel for Toshiba" Tags="|wifi|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21410" PostTypeId="1" CreationDate="2019-12-07T02:58:42.843" Score="1" ViewCount="582" Body="&lt;p&gt;'Try Elementary' works fine from bootable USB. However, after I install and boot I get a black screen after the splash screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read about editing a line at bootup to state nomodeset, but I'm still getting the black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an Nvidia-340, which may be the culprit. Anyone with more experience got a handle on this? I'm on a 2010 MacBook Pro.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried reinstalling Hera three times. &lt;/p&gt;&#xA;" OwnerUserId="19695" LastEditorUserId="19695" LastEditDate="2019-12-07T14:15:54.573" LastActivityDate="2021-01-26T18:42:46.803" Title="Black Screen After Hera Install?" Tags="|display|release-hera|" AnswerCount="3" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21411" PostTypeId="1" AcceptedAnswerId="21439" CreationDate="2019-12-07T04:14:58.460" Score="1" ViewCount="733" Body="&lt;p&gt;Error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Failed to Fetch Updates&#xA;This may have been caused by external, manually added software repositories or a corrupted sources file.&#xA;&#xA;Details &amp;gt;&#xA;Failed to obtain authentication&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I do have additional software sources added, a few PPAs and a repository for weechat from the weechat devs.  I'm not sure which one is the culprit (if any).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;sudo apt update&quot; works flawlessly, and I am able to install software through the terminal.  But I am unable to install anything through AppCenter, either free or paid, it simply starts downloading and then fails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My appcenter.list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://packages.elementary.io/appcenter bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;elementary.list:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I also have a patches.list with the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main&#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The other contents of my /etc/apt/sources.list.d/ are a PPA for updated versions of mpv, a PPA for an updated version of GIMP, the elementary tweaks PPA, vscode's repository, and weechat's bionic repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will try removing them one by one to see if they are the culprit but I would appreciate any input someone could give me.&lt;/p&gt;&#xA;" OwnerUserId="15591" LastActivityDate="2019-12-28T16:05:44.180" Title="AppCenter complains and doesn't work to install anything" Tags="|updates|appcenter|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21412" PostTypeId="1" CreationDate="2019-12-07T05:36:12.450" Score="0" ViewCount="258" Body="&lt;p&gt;I tried to install Elementary OS alongside windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I created a bootable disk with Rufus. I know that the disk works because I could manage to install it to my old thinkpad. But when I tried to install it on my &lt;strong&gt;Surface&lt;/strong&gt;, I made a mistake and tried the option to create a partition and did something wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I tried to restart the pc did not open and gave me &quot;something went seriously wrong, could not find mok&quot; ( I am not sure if I am writing this correct the screen goes too quick). I took it to a repair guy, he installed the Windows 10 back again and windows works now. But my C/ drive shows only 99 something and there is a new D/ drive showing 18 something. I think this is because I tried to create a 20000 mb partition and this was wrong.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now my surface won't boot from USB and gives me the same error. I can start windows. I don't know how to solve this problem and did not see anyone facing a similar problem. I am new to Linux and not really good with computers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I would be glad if someone could help me solve this problem. &lt;/p&gt;&#xA;" OwnerUserId="19697" LastEditorUserId="19360" LastEditDate="2019-12-08T04:00:32.300" LastActivityDate="2019-12-08T04:00:32.300" Title="Installation problem &quot;serious problem couldnt find mok&quot;" Tags="|dual-boot|surface-tablet|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21413" PostTypeId="2" ParentId="21410" CreationDate="2019-12-07T05:53:31.020" Score="1" Body="&lt;p&gt;I set &lt;code&gt;nouveau.modeset=0&lt;/code&gt; before and after install.  If your laptop is still running while black screen, try connect a second monitor and see.&lt;/p&gt;&#xA;" OwnerUserId="19480" LastActivityDate="2019-12-07T05:53:31.020" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21414" PostTypeId="5" CreationDate="2019-12-07T06:54:11.493" Score="0" Body="&lt;p&gt;&lt;strong&gt;Hera&lt;/strong&gt; is the code name for elementary OS 5.1. It is the latest stable version of the operating system, released in December 2019.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-12-07T06:54:11.493" LastActivityDate="2019-12-07T06:54:11.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21415" PostTypeId="4" CreationDate="2019-12-07T06:54:11.493" Score="0" Body="Questions specific to elementary OS 5.1, code name &quot;Hera&quot;." OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2019-12-07T06:54:11.493" LastActivityDate="2019-12-07T06:54:11.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21416" PostTypeId="2" ParentId="21403" CreationDate="2019-12-07T07:32:44.300" Score="0" Body="&lt;p&gt;The &quot;painless&quot; option that comes to my mind is to force application you use to go fullscreen. You can even define keyboard shortcut in order to do that easily. &#xA;System settings - Keyboard - Shortcust - Window - Toggle Fullscreen.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-07T07:32:44.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21417" PostTypeId="1" CreationDate="2019-12-07T08:35:27.190" Score="0" ViewCount="597" Body="&lt;p&gt;Scrolling websites on Epiphany is pretty smooth, same as I used to from Windows. This is not the case for Chrome.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried enabling the &lt;code&gt;smooth-scrolling&lt;/code&gt; Chrome flag (though I think it's enabled by default) but that didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on Dell XPS 13 9530, with 5.1 Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone bumped into it? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="8017" LastEditorUserId="16827" LastEditDate="2019-12-08T04:03:48.857" LastActivityDate="2024-01-16T15:06:15.783" Title="Enable smooth scrolling on Chrome" Tags="|google-chrome|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21418" PostTypeId="1" AcceptedAnswerId="21518" CreationDate="2019-12-07T10:17:48.103" Score="0" ViewCount="114" Body="&lt;p&gt;I use &lt;strong&gt;elementary OS 5.1 Hera&lt;/strong&gt;. In particular, I am using &lt;strong&gt;Asus ROG Strix G Core i5 G531GT-BQ002T&#xA;Gaming Laptop&lt;/strong&gt;   and can't find command for the Keyboard backlight let alone RGB strip. There is no key for it on my device. If anyone is interested then plz work on it&lt;/p&gt;&#xA;" OwnerUserId="19700" LastEditorUserId="19700" LastEditDate="2022-01-01T12:58:27.163" LastActivityDate="2022-01-01T12:58:27.163" Title="Are there open source app/programs to turn backlight on and off in Elementary os?" Tags="|asus|release-hera|backlight|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21420" PostTypeId="1" CreationDate="2019-12-07T10:46:04.910" Score="1" ViewCount="77" Body="&lt;p&gt;A new vulnerability affect all Linux disro - How can I check if my OS (elementary OS) is affected by this so called &quot;VPN-tunneled TCP connections.&quot;&#xA;Further: How can I turn ON Reverse Path Forwarding as one of the possible mitigation solution to avoid being hihjack? &lt;/p&gt;&#xA;" OwnerUserId="19703" LastActivityDate="2023-12-16T23:02:20.307" Title="Vulnerability: hijacking VPN-tunneled TCP connections" Tags="|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21421" PostTypeId="1" CreationDate="2019-12-07T11:01:04.913" Score="1" ViewCount="977" Body="&lt;p&gt;I'm trying to set up Chrome Remote Desktop on Elementary. I downloaded the chrome remote desktop &lt;code&gt;.deb&lt;/code&gt; package from their website, installed it through &lt;code&gt;Eddy&lt;/code&gt;, but I can't launch that app and complete the setup as it doesn't appear anywhere. What am I missing?&lt;/p&gt;&#xA;" OwnerUserId="8017" LastActivityDate="2020-07-25T21:03:20.323" Title="Installing Chrome Remote Desktop" Tags="|google-chrome|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21422" PostTypeId="2" ParentId="21421" CreationDate="2019-12-07T11:31:53.990" Score="1" Body="&lt;p&gt;For me, you need before &lt;strong&gt;install Google Chrome first&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Download&#xA;$ wget https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb&#xA;&#xA;# Install&#xA;$ sudo dpkg -i google-chrome-stable_current_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and after you need install &lt;strong&gt;Chrome Remote Desktop&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Download&#xA;$ wget https://dl.google.com/linux/direct/chrome-remote-desktop_current_amd64.deb&#xA;&#xA;# Install&#xA;$ sudo dpkg -i chrome-remote-desktop_current_amd64.deb&#xA;&#xA;# Install dependencies&#xA;$ sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can also install &lt;strong&gt;Google Chrome Desktop&lt;/strong&gt; in Chrome Web Store&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://chrome.google.com/webstore/detail/chrome-remote-desktop/gbchcmhmhahfdphkhkmpfmihenigjmpp&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://chrome.google.com/webstore/detail/chrome-remote-desktop/gbchcmhmhahfdphkhkmpfmihenigjmpp&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After activate the service &lt;strong&gt;chrome-remote-desktop.service&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ systemctl status chrome-remote-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;you will also need to configure the service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://remotedesktop.google.com/access&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://remotedesktop.google.com/access&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-07T11:37:56.127" LastActivityDate="2019-12-07T11:37:56.127" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21423" PostTypeId="2" ParentId="21420" CreationDate="2019-12-07T11:45:53.453" Score="0" Body="&lt;p&gt;Elementary OS actual : Hera 5.1 is based on Ubutnu 18.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think you talked about the vulnerability &lt;a href=&quot;https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-14899&quot; rel=&quot;nofollow noreferrer&quot;&gt;CVE-2019-14899&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;after some research the vulnerability does not affect the version of Ubuntu released before version 19.10, you have more information here :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://securityaffairs.co/wordpress/94764/hacking/cve-2019-14899-vpn-flaw.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://securityaffairs.co/wordpress/94764/hacking/cve-2019-14899-vpn-flaw.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T11:45:53.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21424" PostTypeId="2" ParentId="21409" CreationDate="2019-12-07T12:01:57.407" Score="0" Body="&lt;p&gt;So that the Wifi card almost always works do not forget to check the option&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Install third-party software for graphics Wi-Fi Hardware and additionalmedia formats&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in the window &lt;strong&gt;Update and other software&lt;/strong&gt; during the installation&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T12:01:57.407" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21425" PostTypeId="2" ParentId="21401" CreationDate="2019-12-07T12:04:56.987" Score="0" Body="&lt;p&gt;I found this and maybe this Github project help you : &lt;a href=&quot;https://github.com/jakeday/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jakeday/linux-surface&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T12:04:56.987" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21426" PostTypeId="2" ParentId="21417" CreationDate="2019-12-07T12:14:36.310" Score="0" Body="&lt;p&gt;I have two different Dell XPS 13 9370 and 9365.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to me that one of the two, after the update to Hera 5.1, had a little trouble with the Touchpad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems to me that after updating the kernel it solved the problem, in any case I had no problem.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T12:14:36.310" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21427" PostTypeId="2" ParentId="21310" CreationDate="2019-12-07T12:24:35.430" Score="0" Body="&lt;p&gt;You can install &lt;code&gt;gnome-color-manager&lt;/code&gt; to do that yourslef&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install gnome-color-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xnQl9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y8G4B.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xnQl9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xnQl9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T12:24:35.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21428" PostTypeId="2" ParentId="21408" CreationDate="2019-12-07T12:42:25.297" Score="2" Body="&lt;p&gt;Apparently the problem has been reported on the application's github and is not resolved yet&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/music/issues/156&quot; rel=&quot;nofollow noreferrer&quot;&gt;Issue 156&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/music/issues/451&quot; rel=&quot;nofollow noreferrer&quot;&gt;Issue 451&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I propose to use another TAG MP3 editor like &lt;code&gt;Easy Tag&lt;/code&gt; for the moment and follow this issue on the Github project &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install easytag&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T12:42:25.297" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21429" PostTypeId="1" AcceptedAnswerId="21430" CreationDate="2019-12-07T13:21:49.433" Score="0" ViewCount="523" Body="&lt;p&gt;I have accidentally set the external, mirrored monitor to a very low resolution.&#xA;As a result I cannot set it back to a higher resolution, because I cannot get to the &quot;apply&quot; button at the bottom of the monitor settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Without having the external monitor connected, the resolution on the laptop is fine, but as soon as I connect the external monitor it defaults back into these low resolution settings in which I cannot change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to change this back to normal settings, maybe using the command line?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on ElementaryOS Hera, on a Lenovo X220. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="13020" LastEditorUserId="16827" LastEditDate="2019-12-08T04:05:24.603" LastActivityDate="2019-12-08T04:05:24.603" Title="Cannot change back low resolution for external monitor" Tags="|settings|resolution|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21430" PostTypeId="2" ParentId="21429" CreationDate="2019-12-07T13:45:22.280" Score="1" Body="&lt;p&gt;Thank you for having this question because it allows me to be able to solve problem in command line now, because it already happens to do that with my Dell XPS 13&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can identify the resolutions of your screens with &lt;code&gt;xrandr&lt;/code&gt; with the flag &lt;code&gt;q&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xrandr -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Exemple with one monitor&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192&#xA;HDMI-1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm&#xA;   1920x1080     60.00*+  50.00    59.94  &#xA;   1920x1080i    60.00    50.00    59.94  &#xA;   1680x1050     59.88  &#xA;   1280x1024     75.02    60.02  &#xA;   1440x900      74.98    59.90  &#xA;   1280x960      60.00  &#xA;   1152x864      75.00  &#xA;   1280x720      60.00    50.00    59.94  &#xA;   1024x768      75.03    70.07    60.00  &#xA;   832x624       74.55  &#xA;   800x600       72.19    75.00    60.32    56.25  &#xA;   720x576       50.00  &#xA;   720x480       60.00    59.94  &#xA;   640x480       75.00    72.81    66.67    60.00    59.94  &#xA;   720x400       70.08  &#xA;HDMI-2 disconnected (normal left inverted right x axis y axis)&#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-3 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My screen is HDMI-1, if you want set my monitor resolution to 1680x1050 I need do that&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ xrandr --output HDMI-1 --mode 1680x1050&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The change will take effect immediately, the screens will become black for a moment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can use Tabulation after &lt;code&gt;--output&lt;/code&gt; for autocomplete the name of the video output on which you want to do your action&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this will help you&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-08T01:03:44.133" LastActivityDate="2019-12-08T01:03:44.133" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21431" PostTypeId="2" ParentId="18430" CreationDate="2019-12-07T13:55:51.233" Score="1" Body="&lt;p&gt;I think for that you can &lt;em&gt;disable Wingpanel Transparency&lt;/em&gt; like that in Commande Line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set io.elementary.desktop.wingpanel use-transparency &quot;false&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T13:55:51.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21432" PostTypeId="1" CreationDate="2019-12-07T14:30:45.543" Score="0" ViewCount="32" Body="&lt;p&gt;I'm trying to contribute to Elementary with spanish translations but I want add a Spanish (Colombia) language but I don't have permissions. Could you please help me adding the Spanish (Colombia)?. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="19704" LastActivityDate="2023-12-15T20:03:00.387" Title="The language - Spanish (Colombia) is not available" Tags="|elementary-website|translation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21433" PostTypeId="1" AcceptedAnswerId="21434" CreationDate="2019-12-07T14:42:17.870" Score="1" ViewCount="810" Body="&lt;p&gt;My trackpad stopped working after updating form Juno to Hera, now I'm forced to use a mouse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/r5I8b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r5I8b.png&quot; alt=&quot;system info&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;from my xinput list the touchpas seems to be recognized:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Virtual core pointer                        id=2    [master pointer  (3)]&#xA;Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]&#xA;USB OPTICAL MOUSE                       id=10   [slave  pointer  (2)]&#xA;Synaptics TM3108-002                        id=12   [slave  pointer  (2)]&#xA;Virtual core keyboard                       id=3    [master keyboard (2)]&#xA;Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]&#xA;Power Button                                id=6    [slave  keyboard (3)]&#xA;Video Bus                                   id=7    [slave  keyboard (3)]&#xA;Power Button                                id=8    [slave  keyboard (3)]&#xA;Sleep Button                                id=9    [slave  keyboard (3)]&#xA;Integrated_Webcam_HD: Integrate             id=11   [slave  keyboard (3)]&#xA;Dell WMI hotkeys                            id=13   [slave  keyboard (3)]&#xA;AT Translated Set 2 keyboard                id=14   [slave  keyboard (3)]&#xA;DELL Wireless hotkeys                       id=15   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried installing synaptic drivers which seemed to be missing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install xserver-xorg-input-synaptics&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but that didn't solve anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="8069" LastEditorUserId="8069" LastEditDate="2019-12-07T14:49:38.327" LastActivityDate="2020-01-23T19:24:30.420" Title="Touchpad stopped working after Hera 5.1 update" Tags="|touchpad|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21434" PostTypeId="2" ParentId="21433" CreationDate="2019-12-07T14:57:11.763" Score="1" Body="&lt;p&gt;I see you do not have the new Kernel tried to update it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I think that will solve your problem, someone else also had this problem &lt;a href=&quot;https://elementaryos.stackexchange.com/q/21337/19360&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fCm7l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fCm7l.png&quot; alt=&quot;elementaryos_about&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T14:57:11.763" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21435" PostTypeId="2" ParentId="21432" CreationDate="2019-12-07T15:04:05.240" Score="0" Body="&lt;p&gt;You can contribute to the translation of Elementary OS &lt;a href=&quot;https://l10n.elementary.io/languages/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the list there is at least &lt;strong&gt;&lt;em&gt;Spanish (American Latin)&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you have the documentation &lt;a href=&quot;https://docs.weblate.org/en/weblate-3.7.1/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T15:04:05.240" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21436" PostTypeId="1" CreationDate="2019-12-07T15:12:25.207" Score="0" ViewCount="452" Body="&lt;p&gt;I tried the settings given at &lt;a href=&quot;https://support.apple.com/en-us/HT202304&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.apple.com/en-us/HT202304&lt;/a&gt; with an app specific password. But nothing seems to work out. &#xA;I keep getting this error saying &lt;code&gt;Unable to validate: SMTP connection error&lt;/code&gt;. What am I supposed to do ? I'm able to connect to my account via other email clients (eg. Outlook)&lt;/p&gt;&#xA;" OwnerUserId="19705" LastActivityDate="2024-01-16T22:03:10.357" Title="Mail App doesn't let me login to my iCloud mail" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21437" PostTypeId="2" ParentId="21436" CreationDate="2019-12-07T15:39:11.817" Score="0" Body="&lt;p&gt;After test I think I can add my iCloud mail with this settings&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pw4k0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pw4k0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But after I have this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PRIr2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PRIr2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I do not want to accept this message&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it's better that you go through another mail tool that natively supports iCloud&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-07T15:39:11.817" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21438" PostTypeId="1" AcceptedAnswerId="21440" CreationDate="2019-12-07T18:05:46.540" Score="0" ViewCount="160" Body="&lt;p&gt;Did a little bit of updating and all of a sudden, the word &quot;normal&quot; is appearing in my apps.  See below.  Anyone have any idea how to get rid of this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UXyO6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UXyO6.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2021-03-11T21:35:12.760" Title="The word &quot;normal&quot; has started appearing on the upper right corner of my apps" Tags="|desktop|graphics|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21439" PostTypeId="2" ParentId="21411" CreationDate="2019-12-07T18:15:57.593" Score="1" Body="&lt;p&gt;So the solution was pretty simple.  Just a matter of removing AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then reinstalling it&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Et viola, no more errors!  I think it had something to do with reusing a /home partition from a previous elementary OS (and a few other distros too) install.&lt;/p&gt;&#xA;" OwnerUserId="15591" LastActivityDate="2019-12-07T18:15:57.593" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21440" PostTypeId="2" ParentId="21438" CreationDate="2019-12-07T18:40:20.027" Score="2" Body="&lt;p&gt;You must be having an nVidia graphics card. If so, open &lt;code&gt;nVidia X Server Settings&lt;/code&gt; from the Applications menu, go to &lt;code&gt;OpenGL Settings&lt;/code&gt; and uncheck &quot;Enable Graphics API Visual Indicator&quot;.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-07T18:40:20.027" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21441" PostTypeId="1" CreationDate="2019-12-07T21:16:33.687" Score="0" ViewCount="97" Body="&lt;p&gt;I would like to add a brightness slider to the top-bar, but am not able to figure out how to do this via System Settings -&gt; Power -&gt; Display Brightness. Unfortunately the SP2 keyboard does not have Fn buttons for this either. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried this &quot;Brightness Indicator&quot; app, and it seemed to install fine, but it will not open:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/m9ZHZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m9ZHZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Never mind, found the brightness slider under the &lt;strong&gt;Battery icon drop-down menu&lt;/strong&gt;. First day on the OS if you can't tell! &lt;/p&gt;&#xA;" OwnerUserId="19710" LastEditorUserId="16827" LastEditDate="2019-12-08T04:05:10.700" LastActivityDate="2020-01-07T19:03:15.533" Title="Add a brightness slider to the top bar? Using 5.1 Hera on a Surface Pro 2" Tags="|brightness|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21442" PostTypeId="1" CreationDate="2019-12-07T22:57:51.133" Score="0" ViewCount="481" Body="&lt;p&gt;The wifi logo doesn't show up in the top right corner and I don't have the option to connect wirelessly to any routers.&#xA;I tried every command I could find to solve this problem but none of them have worked so far. It was suggested that I need a driver from the app center, but I didn't find a &quot;drivers&quot; tab there. What could be a solution to this problem? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed Windows on this laptop before and the wifi worked just fine.&lt;br&gt;&#xA;The output for &lt;code&gt;lshw -C network&lt;/code&gt; is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; *-network UNCLAIMED       &#xA;       description: Network controller&#xA;       product: RTL8821CE 802.11ac PCIe Wireless Network Adapter&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       version: 00&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress cap_list&#xA;       configuration: latency=0&#xA;       resources: ioport:2000(size=256) memory:f0c00000-f0c0ffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL810xE PCI Express Fast Ethernet controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:03:00.0&#xA;       logical name: enp3s0&#xA;       version: 07&#xA;       serial: e8:6a:64:98:ab:bf&#xA;       size: 100Mbit/s&#xA;       capacity: 100Mbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8106e-1_0.0.1 06/29/12 ip=192.168.1.6 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s&#xA;       resources: irq:33 ioport:1000(size=256) memory:f0b00000-f0b00fff memory:f0800000-f0803fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19712" LastEditorUserId="19360" LastEditDate="2019-12-09T10:46:36.523" LastActivityDate="2023-12-19T05:01:35.183" Title="I can't enable the WIFI in any way" Tags="|wifi|appcenter|drivers|internet|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21443" PostTypeId="1" AcceptedAnswerId="21444" CreationDate="2019-12-07T23:19:44.217" Score="0" ViewCount="69" Body="&lt;p&gt;Hello I have this problem, I don't know how to solve it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QCbzc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QCbzc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19713" LastActivityDate="2019-12-08T00:26:31.027" Title="After trying to install Brave Browser I can't update de system anymore" Tags="|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21444" PostTypeId="2" ParentId="21443" CreationDate="2019-12-08T00:26:31.027" Score="1" Body="&lt;p&gt;It looks like the source list file for the brave browser is corrupted. You can remove it with &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/brave-browser-release-.list&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;and try to install it again later. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T00:26:31.027" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21445" PostTypeId="2" ParentId="21372" CreationDate="2019-12-08T01:05:45.867" Score="0" Body="&lt;p&gt;I can recommend you to try another browser - firefox and chromium can be easily isntalled. I had such problems with Epiphany also but did not found the reason - it was more easy for me to change the web browser. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T01:05:45.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21446" PostTypeId="2" ParentId="18430" CreationDate="2019-12-08T01:09:18.720" Score="0" Body="&lt;p&gt;The easiest way to achieve this is by using System settings &gt; Desktop &gt; Appearence &gt;  turn off Pannel translucency.  &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T01:09:18.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21447" PostTypeId="2" ParentId="21398" CreationDate="2019-12-08T01:42:16.720" Score="0" Body="&lt;p&gt;I was fighting with this a lot of time and at the end I have failed...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason elementay OS do not allow using the Super key for this purpose and if you manage to achieve such a functionality it is like a hack and always has some downsides.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example I use the &lt;em&gt;Super key&lt;/em&gt; now to show applications menu and works without any problems because there is such a setting into&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;System settings &gt; Keyboard &gt; Layout&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when I was trying to remap it with &lt;code&gt;xdotool&lt;/code&gt; or another 'solutions' I have found ... some of the native shortcuts has gone or the opening of the multitasking view did not work flowlessly - sometimes it opens, sometimes has to press it twice to open and sometimes is like your case - cannot return from multitasking when I press the Super key for a second time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wish you good luck, if you find a solution, will be happy to try it. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="19360" LastEditDate="2019-12-10T02:14:45.227" LastActivityDate="2019-12-10T02:14:45.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21448" PostTypeId="2" ParentId="21329" CreationDate="2019-12-08T01:59:21.207" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#verify-your-download&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd66c32d53eab6f789b8e69e499305b7af0c9b3083ed54d50b111136d2795ea1&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T01:59:21.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21449" PostTypeId="1" CreationDate="2019-12-08T06:52:55.117" Score="0" ViewCount="95" Body="&lt;p&gt;I am booting to install using from usb and i get stuck on the welcome screen, my mouse or keyboard will not work to continue install. help.&lt;/p&gt;&#xA;" OwnerUserId="19718" LastEditorUserId="16827" LastEditDate="2019-12-17T16:02:36.113" LastActivityDate="2023-12-27T05:02:05.240" Title="i am unable to get past the welcome screen to install" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21450" PostTypeId="1" CreationDate="2019-12-08T06:54:56.800" Score="0" ViewCount="448" Body="&lt;p&gt;After I update to Hera, I can't change lockscreen wallpaper. Is there any a way to change lockscreen wallpaper and not change the dekstop?&lt;/p&gt;&#xA;" OwnerUserId="19719" LastActivityDate="2023-12-18T05:07:31.007" Title="how to change wallpaper on the lockscreen" Tags="|greeter|wallpaper|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21451" PostTypeId="1" CreationDate="2019-12-08T08:39:28.393" Score="0" ViewCount="64" Body="&lt;p&gt;I have a debit card and I cannot purchase elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I made a donation of 10 $ trough PayPal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I now have access to the download? Thanks for the support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards,&lt;br&gt;&#xA;Valter &lt;/p&gt;&#xA;" OwnerUserId="19721" LastEditorUserId="19360" LastEditDate="2019-12-10T02:15:53.287" LastActivityDate="2019-12-10T02:15:53.287" Title="Purchase and Download" Tags="|elementary-website|download|" AnswerCount="1" CommentCount="0" ClosedDate="2019-12-10T02:16:08.193" ContentLicense="CC BY-SA 4.0" />
  <row Id="21452" PostTypeId="2" ParentId="21451" CreationDate="2019-12-08T08:50:59.370" Score="2" Body="&lt;p&gt;If you type 0 in the Custom box, the Purchase button turns into a Download button. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZtRVz.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZtRVz.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-08T09:34:23.877" LastActivityDate="2019-12-08T09:34:23.877" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21453" PostTypeId="1" CreationDate="2019-12-08T09:29:15.207" Score="0" ViewCount="36" Body="&lt;p&gt;I tried installing elementary OS along with Windows 10 in separate disc in &lt;em&gt;Acer Aspire 5s&lt;/em&gt;. But during boot, it asks to install or try. Clicked on install and after choosing language it shows your computer has 7.9 GB (installing on 8 GB pendrive) and requires min 8 GB for installation. It doesn't show disc partition or similar. I tried disabling secure boot too. &lt;/p&gt;&#xA;" OwnerUserId="19722" LastEditorUserId="16827" LastEditDate="2019-12-09T10:51:41.330" LastActivityDate="2019-12-09T11:00:59.083" Title="No recognition of drives while installing OS!" Tags="|system-installation|dual-boot|acer|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21454" PostTypeId="2" ParentId="10338" CreationDate="2019-12-08T10:26:50.613" Score="1" Body="&lt;p&gt;Just had the same issue on elementary OS Hera. I've fixed it by adding this line to my &lt;code&gt;.bashrc&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;export PKG_CONFIG_PATH=&quot;/usr/share/pkgconfig:/usr/lib/pkgconfig:/usr/lib/x86_64-linux-gnu/pkgconfig:$PKG_CONFIG_PATH&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19723" LastActivityDate="2019-12-08T10:26:50.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21455" PostTypeId="1" AcceptedAnswerId="21915" CreationDate="2019-12-08T13:15:43.760" Score="1" ViewCount="2366" Body="&lt;p&gt;I am trying to let my XPS 13 7390 hibernate when closing the lid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed &lt;a href=&quot;https://askubuntu.com/questions/145443/how-do-i-use-pm-suspend-hybrid-by-default-instead-of-pm-suspend/781957#781957&quot;&gt;this guide&lt;/a&gt; to set my system up to do this. But I think it is not working properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I run &lt;code&gt;sudo systemctl suspend-then-hibernate&lt;/code&gt; I can see new &quot;hibernation&quot; logs, when running &lt;code&gt;cat /var/log/syslog | grep hibernate&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Dec  8 14:04:16 jonas-XPS-13-7390 systemd[1]: Starting Suspend; Idle into hibernate...&#xA;Dec  8 14:05:32 jonas-XPS-13-7390 systemd[1]: Started Suspend; Idle into hibernate.&#xA;Dec  8 14:05:32 jonas-XPS-13-7390 systemd[1]: Reached target Suspend; Idle into hibernate.&#xA;Dec  8 14:05:32 jonas-XPS-13-7390 systemd[1]: suspend-then-hibernate.target: Unit not needed anymore. Stopping.&#xA;Dec  8 14:05:32 jonas-XPS-13-7390 systemd[1]: Stopped target Suspend; Idle into hibernate.&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And searching for &quot;sleep&quot; I get the following lines:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Dec  8 14:04:16 jonas-XPS-13-7390 systemd-sleep[11380]: Suspending system...&#xA;Dec  8 14:05:32 jonas-XPS-13-7390 systemd-sleep[11380]: System resumed.&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;But when i close the lid, or press the power button, NO new hibernation is logged.&lt;/strong&gt; But when i search for the term &quot;sleep&quot; it shows the same logs as when i've run the hibernation command manually from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Dec  8 14:10:51 jonas-XPS-13-7390 systemd-sleep[12481]: Suspending system...&#xA;Dec  8 14:11:29 jonas-XPS-13-7390 systemd-sleep[12481]: System resumed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now I want to know:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How can I find out if my system was actually hibernating (using less energy than sleeping is my main focus here)?&lt;/li&gt;&#xA;&lt;li&gt;How can I make my elementary installation sleep when closing the lid?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19681" LastActivityDate="2020-06-20T12:13:15.483" Title="Hibernation on elementaryOS" Tags="|suspend|laptop|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21456" PostTypeId="1" CreationDate="2019-12-08T17:09:38.253" Score="0" ViewCount="117" Body="&lt;p&gt;I have both bubbles and sounds turned off in the notifications control panel.  But mail keep sending notification bubbles, as does chrome and spotify.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd love to shut all that crap off for a while.&lt;/p&gt;&#xA;" OwnerUserId="12434" LastActivityDate="2019-12-08T19:59:47.820" Title="Turning off notifications in Hera 5.1 doesn't seem to actually do anything" Tags="|notifications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21457" PostTypeId="2" ParentId="21441" CreationDate="2019-12-08T18:12:49.747" Score="1" Body="&lt;p&gt;I found the brightness slider under the &lt;strong&gt;Battery icon&lt;/strong&gt; drop-down menu:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/I6Yd5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I6Yd5.png&quot; alt=&quot;brightness_slider&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19710" LastActivityDate="2019-12-08T18:12:49.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21458" PostTypeId="1" CreationDate="2019-12-08T18:45:59.723" Score="0" ViewCount="53" Body="&lt;p&gt;I came back into Elementary OS on my Macbook Pro and suddenly the resolution was really, really high. I tried to go in and change it but it only offers a single option. Everything is super small and text is so small that it's illegible. Any suggestions on how I can correct this?&lt;/p&gt;&#xA;" OwnerUserId="16495" LastActivityDate="2023-12-18T00:02:50.337" Title="Resolution is suddenly really, really high and I can't seem to change it" Tags="|macbook|resolution|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21459" PostTypeId="2" ParentId="21458" CreationDate="2019-12-08T18:54:54.887" Score="0" Body="&lt;p&gt;Do you have an option itno System settings &gt; Displays in the bottom left part of the window called &quot;Scalling factor&quot;? You can try Pixel Doubled from there to see if it helps. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T18:54:54.887" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21460" PostTypeId="2" ParentId="21456" CreationDate="2019-12-08T18:58:20.157" Score="0" Body="&lt;p&gt;Usually the settings that you decribe works to stop notifications, but can you try also from the top panel udner the bell icon to set &lt;strong&gt;Do not disturb&lt;/strong&gt; also to see if there is any change?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T18:58:20.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21461" PostTypeId="2" ParentId="21456" CreationDate="2019-12-08T19:59:47.820" Score="1" Body="&lt;p&gt;Indeed normally you can disable all notifications, it allows to be focused on these tasks. As you can tell @bo-rislav you can do this with the notification bell menu at the &lt;strong&gt;top right&lt;/strong&gt; :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DgwIj.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DgwIj.gif&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;if you want to disable application sounds not listed in the list of &lt;em&gt;&lt;strong&gt;Notifications Settings...&lt;/strong&gt;&lt;/em&gt; you can. At the end of the list you will have &lt;em&gt;&lt;strong&gt;OTHER&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SawsU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SawsU.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you only want to disable &lt;strong&gt;MAIL&lt;/strong&gt; notifications and if for any others reasons let's keep them active you can do it from the &lt;strong&gt;MAIL&lt;/strong&gt; application settings&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gBllS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gBllS.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But normally if you want disable all notifications, enable &lt;strong&gt;Do Not Distrub&lt;/strong&gt; work.&lt;/p&gt;&#xA;&lt;p&gt;I hope this will help you&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-08T19:59:47.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21462" PostTypeId="2" ParentId="21442" CreationDate="2019-12-08T20:15:21.557" Score="0" Body="&lt;p&gt;Now we have the wifi card model I can answer you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would seem that other people have them problem in Ubuntu 18.04 and elementary OS is based on Ubuntu, currently elementary Hera 5.1 is under version 18.04 of Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you can follow this answer on the Ubuntu StackExchange &lt;a href=&quot;https://askubuntu.com/a/1071334/1013655&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;strong&gt;As far as I can tell, at the time of writing this, there is not yet a Wifi Driver for the Realtek RTL8821CE in the official Ubuntu&#xA;  Repositories.&lt;/strong&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;answer by @pHeLiOn in &lt;a href=&quot;https://askubuntu.com/&quot;&gt;https://askubuntu.com/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Hope you can solve your problem.&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-08T20:15:21.557" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21463" PostTypeId="2" ParentId="21449" CreationDate="2019-12-08T20:30:44.847" Score="0" Body="&lt;p&gt;This never happened but you can tried the following solutions&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Try &lt;strong&gt;unplugging your keyboard&lt;/strong&gt; and/or mouse in other USB port&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Enable&lt;/strong&gt; &lt;code&gt;USB Device Legacy Suppor&lt;/code&gt; in your BIOS settings&lt;/li&gt;&#xA;&lt;li&gt;Maybe try plug your Keyboard and/or Mouse &lt;strong&gt;in USB 2.0&lt;/strong&gt; and not 3.0 if you were on 2.0 ports&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If there is only your keyboard that works you can use:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Tab&lt;/kbd&gt; : to change selection&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Space&lt;/kbd&gt; : to valid&#xA;a checkbox&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;kbd&gt;Enter&lt;/kbd&gt; : to press a button&lt;br&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-08T20:30:44.847" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21464" PostTypeId="2" ParentId="21450" CreationDate="2019-12-08T20:33:56.920" Score="0" Body="&lt;p&gt;It is currently not possible to change the Greeter wallpaper of elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can, however, try this branch of Github's Greeter project which would allow to put a wallpaper with an effect blur :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter/tree/blurred-background&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/tree/blurred-background&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I never test this&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-08T20:33:56.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21465" PostTypeId="2" ParentId="21325" CreationDate="2019-12-08T21:48:24.187" Score="0" Body="&lt;p&gt;I am not sure what are you trying to do but some programs prefer the so called symbolic images and if the emogies you use have a symbolic version - then they will use the symbolic one. If there is not - they use the colored one. Both versions correspond to one and the same string and no matter how they look in your screen, every application will use the style that the developpers of the app implemented so there is no correct and not correct - they are the same text information but any app will draws it by the way it is programmed to do that. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-08T21:48:24.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21466" PostTypeId="1" CreationDate="2019-12-08T22:09:22.927" Score="0" ViewCount="146" Body="&lt;p&gt;I am trying to install elementary OS 5.1, but I can never go into live boot on my Razer Blade Pro 17 4k 120hz laptop. The screen just goes black and shows some tearing. I tried doing &lt;code&gt;nomodeset&lt;/code&gt; but still nothing works.&lt;/p&gt;&#xA;" OwnerUserId="19734" LastEditorUserId="308" LastEditDate="2019-12-19T01:10:59.547" LastActivityDate="2023-12-29T14:07:10.883" Title="Can I install elementary OS 5.1 on a Razer Blade Pro 17?" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21467" PostTypeId="1" CreationDate="2019-12-08T23:36:29.217" Score="0" ViewCount="142" Body="&lt;p&gt;The &lt;strong&gt;Killer WiFi hardware&lt;/strong&gt; found in many current Dell laptops is supported from Kernel 5.2 upwards but your newest release has 5.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I installed LinuxMint I got around this by connecting to my iPhone via bluetooth and using the mobile broadband to download the latest Kernal and then everything works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can connect my phone via bluetooth to Hera but the mobile broadband does not appear in Networks as an option. Is it even possible for the user to update the kernel in Hera? and is there a way around the bluetooth wifi connection. I would really like to try out elementary OS properly.&#xA;Paul &lt;/p&gt;&#xA;" OwnerUserId="19736" LastEditorUserId="19360" LastEditDate="2019-12-09T10:47:23.123" LastActivityDate="2021-01-02T19:05:05.420" Title="Unable to install on Dell with Killer WiFi" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21468" PostTypeId="2" ParentId="21319" CreationDate="2019-12-08T23:41:54.263" Score="0" Body="&lt;p&gt;I see that you have updated your Kernel to version 5.4.2. But I think you should install the Kernel version by the official way with this command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the new kernel version was &lt;code&gt;5.0.0-37-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your grapghic card, of what I read on an article you need to update the driver through Nvidia official site &lt;a href=&quot;https://www.nvidia.com/Download/driverResults.aspx/142958/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, for everything to work well with kernel versions 5&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-08T23:41:54.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21469" PostTypeId="2" ParentId="760" CreationDate="2019-12-08T23:58:32.660" Score="0" Body="&lt;p&gt;This is an old question but to add a printer you have to work like that&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Check that your printer is connected to the network&lt;/li&gt;&#xA;&lt;li&gt;search &lt;strong&gt;printer&lt;/strong&gt; in the app launcher&lt;/li&gt;&#xA;&lt;li&gt;on the window click on the &lt;strong&gt;+&lt;/strong&gt; at the bottom left&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Now at the time of writing we are at version 5.1 of elementary OS and personally with a printer Canon MP620 connected in networks by Wifi, I did not need to install driver&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-08T23:58:32.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21471" PostTypeId="2" ParentId="21467" CreationDate="2019-12-09T00:17:45.587" Score="1" Body="&lt;p&gt;I currently have 2 DELL with Killer wifi card and they have always works with the version of elementary OS 5.0 and 5.1 and with kernel 4.X and the new 5.X ( &lt;code&gt;5.0.0-37-generic&lt;/code&gt; for elementary OS Hera)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think you did not check the option &#xA;&lt;strong&gt;install third party software for graphics and wifi hardware and additional media formats&lt;/strong&gt; during the window &lt;strong&gt;Update and other software&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WucSw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WucSw.png&quot; alt=&quot;Update and other software&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want update your Kernel in elementary Hera you can do that with this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-09T00:17:45.587" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21472" PostTypeId="2" ParentId="21301" CreationDate="2019-12-09T00:36:33.063" Score="0" Body="&lt;p&gt;I think this article will help you. Thank you for having this question, I forgot that such a tool can go faster when we know what is on his system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.fossmint.com/best-application-launchers-for-ubuntu-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fossmint.com/best-application-launchers-for-ubuntu-linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-09T00:36:33.063" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21473" PostTypeId="1" CreationDate="2019-12-09T00:50:07.577" Score="3" ViewCount="1600" Body="&lt;p&gt;I'm trying to boot the latest ISO image of Elementary OS from my USB with GRUB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the same GRUB configuration that I use with Ubuntu images, which works fine, and since Elementary is Ubuntu based, I thought it would work as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I get the error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;(initramfs) unable to find a medium containing a live file system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To an extent, I understand this error, which I  sort out adding in the GRUB where to find the ISO image:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA;set root='(hd0,1)'&#xA;set iso_path=/elementaryos-5.1-stable.20191202.iso&#xA;loopback loop $iso_path&#xA;&#xA;menuentry &quot;Try or install elementary OS&quot; {&#xA; linux (loop)/casper/vmlinuz boot=casper &lt;b&gt;iso-scan/filename=$iso_path&lt;/b&gt; maybe-ubiquity quiet splash&#xA; initrd (loop)/casper/initrd.lz&#xA;}&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried with &lt;code&gt;findiso=$iso_path&lt;/code&gt; which works on Debian, but the result is the same. What other GRUB configurations could I try? I prefer not to unpack the ISO to make things work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I check the mdsum of the ISO, it's OK.&lt;/p&gt;&#xA;" OwnerUserId="16837" LastEditorUserId="16837" LastEditDate="2019-12-09T01:02:43.693" LastActivityDate="2020-02-19T22:11:55.737" Title="Elementary OS: boot ISO from USB using GRUB" Tags="|grub|usb-drive|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21474" PostTypeId="1" CreationDate="2019-12-09T00:57:45.847" Score="1" ViewCount="506" Body="&lt;p&gt;I just finished reading and doing according to a prior question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21379/installing-pcloud-drive&quot;&gt;Installing pCloud drive&lt;/a&gt;. It did not work for me. I am getting the same kind of errors the person mentioned but the solution presented did not provide the solution. PCloud client is not working as it used to in previous version. Following PCloud's installation instructions is not an option for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please provide a solution as it is an important piece of software in my daily routine.&lt;/p&gt;&#xA;" OwnerUserId="19737" LastEditorUserId="308" LastEditDate="2019-12-19T01:09:28.493" LastActivityDate="2023-12-28T09:08:10.997" Title="How can I get pCloud to work in elementary OS 5.1?" Tags="|release-hera|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21475" PostTypeId="2" ParentId="18845" CreationDate="2019-12-09T05:44:10.473" Score="1" Body="&lt;p&gt;Some of these come pre-assigned (email, mute, volume- &amp;amp; volume+) The others (HomePage, Search, 1-5, &amp;amp; Calculator) have to be manually assigned. Also, so far I have not been able to assign Search &amp;amp; Calculator.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 1: Creating the custom command.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open System Settings -&gt; Keyboard -&gt; Shortcuts&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If the action you want is not already listed under any of the menu options create a 'Custom' shortcut at the bottom by selecting 'Custom' then pressing the '+' to create a new entry&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;type the command you want (e.g. &quot;io.elementary.calculator %U&quot; to open the calculator)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;after typing the command click on the right hand side of the row (where it says 'Disabled'. This will prompt you with 'New Accelerator...'&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press Shift &amp;amp; the button you want to assign (e.g. media key 1). This will show you &quot;Shift + &quot; then the name of the key (e.g. &quot;Shift + Launcher5&quot; for media key 1)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Continue adding your custom shortcuts this way.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;What's that you say? You don't WANT to have to press Shift each time? Well move on to the janky part...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Step 2: Editing your dconf (yikes)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install dconf editor from the AppCenter. Open it&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You will see a folder structure open up: org &gt; gnome &gt; settings-daemon &gt; plugins &gt; media-keys &gt; custom-keybindings (there is a folder and a key.. you want the folder up top)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Here you should see custome0, custom1, etc. Open the one you want to edit.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the 'binding' key to edit. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Lets say you used Shift + Launcher5 as in our example. Edit the 'Custom value' text (you'll first need to toggle off 'Use default value') and remove the '' from the text.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Press the 'Apply' button at the bottom of the dconf editor.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Test!&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19743" LastActivityDate="2019-12-09T05:44:10.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21476" PostTypeId="2" ParentId="21307" CreationDate="2019-12-09T05:51:32.507" Score="0" Body="&lt;p&gt;Looking at your computer specifications it looks like it is a new model, as long as HP do not support windows 7 and 8 for it. What I recommend you is to update the OS to Hera and especially the kernel to 5.0 because it has a better hardware support for new models as it is written into the elementary.io website. If you decide to do this, the os can be upgraded using the AppCenter, but the kernel to be upgraded you have to execute in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;as it is described at the end of the blog on &lt;a href=&quot;https://blog.elementary.io/introducing-elementary-os-5-1-hera/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.elementary.io/introducing-elementary-os-5-1-hera/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also on the screenshot you provide I see that the problems are with xenial repositories, Juno is based on Bionic version of Ubuntu, that means you are trying to install older, non supported software.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-09T05:51:32.507" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21477" PostTypeId="2" ParentId="21474" CreationDate="2019-12-09T06:12:11.390" Score="0" Body="&lt;p&gt;I do not know how did you install the pCloud but I did this few weeks ago following the instructions on pCloud website without any cusotmizations as it is stated into the other post about pCloud problem. What I recommend you is to try the steps that are on &lt;a href=&quot;https://www.pcloud.com/how-to-install-pcloud-drive-linux.html?download=electron-64&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.pcloud.com/how-to-install-pcloud-drive-linux.html?download=electron-64&lt;/a&gt; but before execution of the appimage file, first put in on the place where you will keep it all the time. If you start the appimage from some temporary location and after you move it on some other place, the application lauchner files (using Slingshot for example) will point to a location where there will be no application file and you cannot execute the pcloud app. If you want to move the storage folder into another drive, do not move the folder (pCloudDrive) itself, it will brake the application - use the settings to move the cache file on this another drive. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-09T06:12:11.390" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21478" PostTypeId="1" AcceptedAnswerId="21490" CreationDate="2019-12-09T07:04:39.730" Score="1" ViewCount="4205" Body="&lt;p&gt;I cant seem to pair my airpods to OS 5.1 Hera, has anybody else managed? it just spins at pairing then says unable to pair.&lt;/p&gt;&#xA;" OwnerUserId="19745" LastEditorUserId="16827" LastEditDate="2019-12-11T11:51:54.080" LastActivityDate="2019-12-11T11:51:54.080" Title="Apple Airpods Bluetooth Paring not working" Tags="|bluetooth|release-hera|apple|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21479" PostTypeId="2" ParentId="15215" CreationDate="2019-12-09T08:58:58.503" Score="2" Body="&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/users/5083247/natoboram&quot;&gt;@NatoBoram&lt;/a&gt; answer is my favorite. A tiny supplement for elementary OS 5.0 (Juno) and 5.1 (Hera) the answer works. &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Windows-like layout (three buttons on top right corner):&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DecorationLayout': &amp;lt;':close,minimize,maximize'&amp;gt;}&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;MacOS-like layout (three buttons on top left corner):&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DecorationLayout': &amp;lt;'minimize,maximize,close:'&amp;gt;}&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;I prefer this layout (close button on the left, minimize and maximize buttons on the right):&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.settings-daemon.plugins.xsettings overrides &quot;{'Gtk/DecorationLayout': &amp;lt;'close:minimize,maximize'&amp;gt;}&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;NOTE&lt;/strong&gt;: do not leave any space in &lt;code&gt;'close:minimize,maximize'&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="19747" LastEditorUserId="19360" LastEditDate="2019-12-10T02:16:49.440" LastActivityDate="2019-12-10T02:16:49.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21481" PostTypeId="1" CreationDate="2019-12-09T11:04:42.870" Score="0" ViewCount="111" Body="&lt;p&gt;I have no idea how to enable the finger print reader in order to login.. Side not how could I get fingerprint reader to then enter sudo password when required in the terminal?&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2023-12-19T09:00:45.093" Title="Finger Print Reader Dell G5 5587 15inch" Tags="|hardware|security|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21483" PostTypeId="1" CreationDate="2019-12-09T11:54:03.187" Score="0" ViewCount="478" Body="&lt;p&gt;I installed elementary OS 5.1 on a &lt;strong&gt;2011 Mac Mini&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;During the installation process, the installer recognized the wifi card and downloaded updates during the install.  After a re-boot, the wifi was no longer recognized.  I installed the b43 drivers to correct the problem:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;My question:&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Why did the wifi work during install, but not after?   If there something I could have done to avoid this issue?&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="19749" LastEditorUserId="19360" LastEditDate="2019-12-10T02:13:55.637" LastActivityDate="2023-12-19T15:00:45.083" Title="Wifi Drivers on older Mac" Tags="|wifi|release-hera|macintosh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21484" PostTypeId="1" CreationDate="2019-12-09T12:14:34.770" Score="0" ViewCount="81" Body="&lt;p&gt;I have a working (yes!) Mac Pro 2006, original release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apple stopped offering updates for it ages ago (I got stuck using OSX 10.7.2) and I purchased the latest copy of elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Burned the image into a USB drive , on another computer&lt;/li&gt;&#xA;&lt;li&gt;Booted&#xA;the machine with the USB (the installer detects it’s as an UEFI&#xA;partition)&lt;/li&gt;&#xA;&lt;li&gt;But I cannot get past the initial screen. It goes&#xA;blank no matter what option&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I pass to it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody had success bringing life to a Mac this old?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="19750" LastEditorUserId="19360" LastEditDate="2019-12-10T01:12:58.107" LastActivityDate="2019-12-10T01:12:58.107" Title="Support for Original Mac Pro 2006" Tags="|macintosh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21485" PostTypeId="2" ParentId="21484" CreationDate="2019-12-09T12:37:22.743" Score="1" Body="&lt;p&gt;To install on a 64-bit Mac that uses a 32-bit EFI you'll have to go &lt;a href=&quot;https://mattgadient.com/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Matt Gadient's website&lt;/a&gt; and download a slightly modified version of elementary OS 5.1. Burn a DVD if you can, the author strongly suggests it. Give the page a thorough read first.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://dedicated.mattgadient.com/linux-mac-iso/elementaryos-5.1-stable.20191202-mac-mattgadient.com.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;Direct download link for the modified iso&lt;/a&gt; md5: 3ded91fadf4a4a450539d1f9332e72a3&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-09T17:38:23.427" LastActivityDate="2019-12-09T17:38:23.427" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21487" PostTypeId="1" CreationDate="2019-12-09T13:57:52.993" Score="4" ViewCount="642" Body="&lt;p&gt;Today I've successful update my Elementary 5.0 system to 5.1.&#xA;After reboot I see brand new login screen, type my password and got login screen again.&#xA;I already tried to set runlevel from 5 to 3 and then launch &quot;startx&quot; command with no success. &#xA;Please help&lt;/p&gt;&#xA;" OwnerUserId="19752" LastActivityDate="2023-12-31T03:03:35.377" Title="Unable to login after 5.1 update" Tags="|greeter|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21488" PostTypeId="2" ParentId="21478" CreationDate="2019-12-09T14:19:44.870" Score="0" Body="&lt;p&gt;I may add to your problem, since it seems like bluetooth in general is crap for me. Airpods never work, but also my ps4 controller, and many other devices that normally should connect seemlessly on any other desktop.&lt;/p&gt;&#xA;" OwnerUserId="19074" LastActivityDate="2019-12-09T14:19:44.870" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21489" PostTypeId="1" CreationDate="2019-12-09T14:21:01.003" Score="0" ViewCount="161" Body="&lt;p&gt;Using Elementary OS as VM with Parallels. So far no severe problems. But the trackpad scrolling direction setting has no effect. I'd like to use &quot;natural scrolling&quot; (My German installation: &quot;Natürliches Scrollen&quot;). No matter of the swtch selection, scrolling is always in the same (not desired) mode (i.e. moving down moves window content upwards). Hardware is MAcbook Pro with integrated trackpad...&#xA;Any idea???&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx in advance,&#xA;- dx05&lt;/p&gt;&#xA;" OwnerUserId="19753" LastActivityDate="2024-03-19T03:02:00.210" Title="Tarckpad scroll direction" Tags="|settings|touchpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21490" PostTypeId="2" ParentId="21478" CreationDate="2019-12-09T17:43:50.887" Score="1" Body="&lt;p&gt;I already had problems with headphones, the easiest way is to go through &lt;code&gt;blueman&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your Airpods I thinks this answer in the Ubuntu StackExchange can Help your &lt;a href=&quot;https://askubuntu.com/a/1063582/1013655&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ol&gt;&#xA;  &lt;li&gt;Set &lt;code&gt;ControllerMode = bredr&lt;/code&gt; or &lt;code&gt;ControllerMode = dual&lt;/code&gt; by editing &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt; file using &lt;code&gt;sudo nano&#xA;  /etc/bluetooth/main.conf&lt;/code&gt; command (or another text editor of your&#xA;  choice)&lt;/li&gt;&#xA;  &lt;li&gt;&lt;code&gt;sudo /etc/init.d/bluetooth restart&lt;/code&gt; &lt;/li&gt;&#xA;  &lt;li&gt;&lt;p&gt;Try to pair again.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;By &lt;a href=&quot;https://askubuntu.com/users/857991/alexander&quot;&gt;Alexander&lt;/a&gt; in &lt;a href=&quot;https://askubuntu.com/&quot;&gt;AskUbuntu&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;  &lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-09T17:43:50.887" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21491" PostTypeId="2" ParentId="21481" CreationDate="2019-12-09T18:01:35.023" Score="0" Body="&lt;p&gt;You can try use &lt;code&gt;fingerprint-gui&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it is little old post in Ubuntu StackExchange but you can follow this discution &lt;a href=&quot;https://askubuntu.com/questions/193528/how-to-enable-fingerprint-device-for-thinkpad-t430s-in-12-04&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-09T18:01:35.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21492" PostTypeId="1" AcceptedAnswerId="21495" CreationDate="2019-12-09T20:11:08.683" Score="1" ViewCount="162" Body="&lt;p&gt;On elementary 5.0 I had perfect tackpad support on my &lt;strong&gt;Razer Blade Stealth 2016&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After updating to 5.1 my trackpad no longer works. I've searched through these forums and others for solutions but nothing so far has come up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried uninstalling and reinstalling the &lt;code&gt;xorg-synaptics&lt;/code&gt; driver a few times. I tried reinstalling the whole OS from a 5.0 live USB and then upgrading from a clean install, and that still breaks trackpad support. Just looking for some tips.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="19742" LastEditorUserId="19360" LastEditDate="2019-12-10T00:18:06.810" LastActivityDate="2019-12-10T00:21:28.970" Title="Trackpad breaks on upgrade to 5.1" Tags="|touchpad|release-hera|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21493" PostTypeId="2" ParentId="21473" CreationDate="2019-12-09T20:55:14.093" Score="0" Body="&lt;h3&gt;Partial solution:&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Using the &lt;code&gt;vmlinuz&lt;/code&gt; and &lt;code&gt;initrd&lt;/code&gt; from an  Ubuntu ISO, I could boot Eos. &lt;/p&gt;&#xA;" OwnerUserId="16837" LastActivityDate="2019-12-09T20:55:14.093" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21495" PostTypeId="2" ParentId="21492" CreationDate="2019-12-09T23:31:13.660" Score="0" Body="&lt;p&gt;Many people have their touchpad that does not work anymore or badly after updating to elementary OS Hera 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21433/touchpad-stopped-working-after-hera-5-1-update&quot;&gt;Question 1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21337/touchpad-issues-after-upgrading-to-new-version-5-1&quot;&gt;Question 2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution has trouble, as you can see in the discussion is to update the Kernel. Can you confirm that this is the same for your computer model?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this will solve your problem&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-10T00:21:28.970" LastActivityDate="2019-12-10T00:21:28.970" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21496" PostTypeId="2" ParentId="21483" CreationDate="2019-12-09T23:51:14.300" Score="0" Body="&lt;p&gt;I am not yet mac use but after little research I foudn this super answer from &lt;a href=&quot;https://askubuntu.com/users/6418/metakermit&quot;&gt;@metakermit&lt;/a&gt; in the Ubuntu StackExchange, I think that can help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/a/353993/1013655&quot;&gt;https://askubuntu.com/a/353993/1013655&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently you will also have to install the firmware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By cons I can not tell you exactly why the wifi works during installation and not after, my skill is not hight but may be that this is the Kernel but it is only a assumption&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-09T23:51:14.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21497" PostTypeId="1" AcceptedAnswerId="24494" CreationDate="2019-12-10T00:50:25.233" Score="0" ViewCount="663" Body="&lt;p&gt;I have faced this problem many times, where &lt;code&gt;/var/log/syslog&lt;/code&gt; grew to a very large size, which made my elementary os black screen because the filesystem was full, I have found a &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/dxpysi/filesystemfull/&quot; rel=&quot;nofollow noreferrer&quot;&gt;solution to this problem&lt;/a&gt;, but I have not found what is the cause.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can anyone help me explain why &lt;code&gt;var/log/syslog&lt;/code&gt; can have a very large size?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is the log.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2020-02-04T10:59:18.320" LastActivityDate="2020-05-10T14:29:26.440" Title="`/var/log/syslog` grew to a very large size" Tags="|filesystem|nvidia-driver|" AnswerCount="1" CommentCount="6" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21498" PostTypeId="1" AcceptedAnswerId="21556" CreationDate="2019-12-10T01:32:01.297" Score="1" ViewCount="45" Body="&lt;p&gt;I just bought a &lt;a href=&quot;https://www.samsung.com/br/pc/notebook-style-s51-np760xbe-xw1br/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Samsung Style S51 Pro notebook&lt;/a&gt;, however, some genius in Samsung decided to not include the backslash and pipeline key. My keyboard layout is Portuguese Brazil (in the English version you will see the keyboard fine).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is: how can I add a shortcut so I can type these characters?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Elementary OS 5.1 Hera.&lt;/p&gt;&#xA;" OwnerUserId="19769" LastEditorUserId="16827" LastEditDate="2019-12-11T11:54:08.027" LastActivityDate="2019-12-12T01:19:46.600" Title="Add shortcut for character" Tags="|keyboard|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21499" PostTypeId="1" CreationDate="2019-12-10T01:40:57.253" Score="1" ViewCount="63" Body="&lt;p&gt;I have a driver issue or something that is causing my Wi-Fi to intermittently fail. This is a Microsoft Surface Pro 3 tablet. Here's the Wi-Fi NIC config:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;crimKid@ElmnlryOS-SP3:/etc/pm/sleep.d$ sudo lshw -C network&#xA;[sudo] password for crimKid:         &#xA;  *-network                 &#xA;       description: Wireless interface&#xA;       product: 88W8897 [AVASTAR] 802.11ac Wireless&#xA;       vendor: Marvell Technology Group Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       logical name: wlp1s0&#xA;       version: 00&#xA;       serial: 4c:0b:be:0d:65:dc&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=mwifiex_pcie ip=192.168.3.32 latency=0 multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:59 memory:c0500000-c05fffff memory:c0400000-c04fffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I checked the output of &lt;code&gt;dmesg&lt;/code&gt; but there was far too much and I didn't know what to grep for. How can I fix this? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I did find this when running grep against &lt;code&gt;dmesg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;crimKid@ElmnlryOS-SP4:~$ dmesg | grep -i firmware&#xA;[    0.186908] Spectre V2 : Enabling Restricted Speculation for firmware calls&#xA;[    0.226436] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored&#xA;[    1.870961] [Firmware Bug]: Invalid critical threshold (98)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I googled the above, but apparently there is some argument as to whether or not this is a bug...? &lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=69921&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.kernel.org/show_bug.cgi?id=69921&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19710" LastEditorUserId="19710" LastEditDate="2019-12-10T02:07:06.380" LastActivityDate="2019-12-10T02:07:06.380" Title="Wi-Fi NIC is failing after about an hour - Surface Pro 3 | running 5.1 Hera" Tags="|wifi|drivers|surface-tablet|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21501" PostTypeId="1" CreationDate="2019-12-10T04:02:04.153" Score="0" ViewCount="153" Body="&lt;p&gt;I just wanted to see if anyone had some solutions to my problems. I'm trying to use Calendar, but when I add an &quot;On the Web&quot; calendar, it just doesn't work. So, I added my calendar through Evolution instead (since it connects to Calendar somehow), which works perfectly. However, when I returned to Calendar, some of my events showed up, and others did not. And, events were out of order and duplicated. I guess I can just use Evolution, but I'd much rather use Calendar, since it just looks so much better. I have updated my elementary OS to version 5.1. I hope this is enough information! If you need clarification, just tell me.&lt;/p&gt;&#xA;" OwnerUserId="19771" LastEditorUserId="16827" LastEditDate="2019-12-11T11:51:40.803" LastActivityDate="2023-12-22T04:03:45.470" Title="Not all CalDAV events are showing up in calendar" Tags="|calendar|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21505" PostTypeId="1" CreationDate="2019-12-10T09:37:35.330" Score="0" ViewCount="241" Body="&lt;p&gt;I want to use the elementaryOS Photos app for my photos but I have multiple Systems and want them to share the same photo organizational structure and ofc all edits.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With digiKam I have a mysql database that i can sync, so that I have the same structure on both system.&#xA;Does elementaryOS Photos have something like that? Or how can I achieve similar functionality?&lt;/p&gt;&#xA;" OwnerUserId="19681" LastActivityDate="2023-12-20T07:08:36.107" Title="Where is the elementaryOS Photos Application library stored?" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21506" PostTypeId="1" CreationDate="2019-12-10T09:52:53.473" Score="1" ViewCount="41" Body="&lt;p&gt;As the title says, when trying to turn off my laptop with eOS 5.1 running, it just freezes and turns off only after the battery is completely worn-out (laptop was very hot when this happened, don't know what it was doing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened when I had it installed but also on a live-usb, or even when trying to install the OS: For example at the end of the installation process, when it asks to reboot the system in order to use the new OS, it just freezes instead of rebooting normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm (trying) to run eOS on an Asus ZenBook Pro UX580GE-BN085R.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas why is this happening?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when trying to install eOS the touchpad worked only 1 out of 10 times, I'd appreciate if you could help with this as well.&lt;/p&gt;&#xA;" OwnerUserId="19099" LastActivityDate="2019-12-10T10:58:24.687" Title="Laptop not turning off" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21507" PostTypeId="2" ParentId="21506" CreationDate="2019-12-10T10:58:24.687" Score="1" Body="&lt;p&gt;This exact behaviour happens to me as well if the nVidia drivers are not installed. In terminal, run &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;. Reboot when it's done (or force shut-down).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After reboot, use the nVidia Settings app from the Application menu to switch between the integrated Intel GPU and the dedicated nVidia one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information look here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7967/how-can-i-switch-between-intel-and-nvidia-graphics-card&quot;&gt;How can i switch between Intel and Nvidia Graphics card?&lt;/a&gt;, &lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-10T10:58:24.687" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21508" PostTypeId="1" CreationDate="2019-12-10T11:25:10.917" Score="0" ViewCount="55" Body="&lt;p&gt;I'm using windows 10 with 2 partitions. if i install eOS instead of windows will that put my other personal data partition on danger. Please answer sooner.&lt;/p&gt;&#xA;" OwnerUserId="19773" LastEditorUserId="16827" LastEditDate="2019-12-11T11:52:56.857" LastActivityDate="2023-12-21T05:03:15.443" Title="I'm going to Installing elementary OS on primary partition. will that effect my other partition?" Tags="|system-installation|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21509" PostTypeId="2" ParentId="21508" CreationDate="2019-12-10T11:40:32.643" Score="0" Body="&lt;p&gt;First, you better try with elementary OS live CD to check out if it will work well on your computer. If you install the elementary os on the partition that you do not have any data to keep - it should not put in danger the other partitions where you have data to keep because elementary os file manager can read windows partitions also. But if it is possible - &lt;strong&gt;make a backup of all your files you want to keep&lt;/strong&gt; - anyone with experince of this will advice you to do that. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-10T11:40:32.643" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21510" PostTypeId="1" AcceptedAnswerId="21514" CreationDate="2019-12-10T12:31:36.467" Score="1" ViewCount="260" Body="&lt;p&gt;After Ubuntu, now I try Elementary OS. Looks smart! However when I install GIMP from the App Center, it seems to be an older version, not 2.10.x like with Ubuntu.&#xA;So now I am a little concerned about the versions of other Apps as well.&#xA;Does Elementary have to add i.e. the new Gimp to their App Center or is this done by the application owner, like gimp.org ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Of course it must be possible tot install Gimp with shell commands, but that is so 1980 ;-)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, Geert&lt;/p&gt;&#xA;" OwnerUserId="19774" LastEditorUserId="19774" LastEditDate="2019-12-10T12:38:30.250" LastActivityDate="2019-12-10T12:59:54.340" Title="Gimp 2.10.x not in App Center" Tags="|updates|appcenter|thirdpartyapps|gimp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21512" PostTypeId="1" AcceptedAnswerId="21515" CreationDate="2019-12-10T12:42:36.697" Score="7" ViewCount="14902" Body="&lt;p&gt;Does it still working on elementary OS Hera? is it safe to install?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks and sorry for the odd question! &lt;/p&gt;&#xA;" OwnerUserId="19775" LastEditorUserId="19360" LastEditDate="2019-12-10T13:02:13.137" LastActivityDate="2020-02-08T12:57:05.500" Title="Is elementary-tweaks still working on Hera?" Tags="|release-hera|tweak-tool|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21513" PostTypeId="2" ParentId="21512" CreationDate="2019-12-10T12:53:32.357" Score="1" Body="&lt;p&gt;Yes, they works. The developper pretend that the way they are built is safe for the sysytem, as long as I know there is no any harm for the system by using elementary tweaks. Of course if you set a broken theme or something the layout will be broken but the os will not be destroyed if this is what you ask.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-10T12:53:32.357" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21514" PostTypeId="2" ParentId="21510" CreationDate="2019-12-10T12:59:54.340" Score="1" Body="&lt;p&gt;I think the easiest way to do that is to find the flatpak version of gimp and install it. &lt;a href=&quot;https://www.flathub.org/apps/details/org.gimp.GIMP&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.flathub.org/apps/details/org.gimp.GIMP&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-10T12:59:54.340" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21515" PostTypeId="2" ParentId="21512" CreationDate="2019-12-10T13:04:11.660" Score="10" Body="&lt;p&gt;Yes &lt;code&gt;elementary-tweak&lt;/code&gt; work very well with Hera's release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have it and I have no problem with. Like say &lt;a href=&quot;https://elementaryos.stackexchange.com/users/12483/bo-rislav&quot;&gt;@Bo_rislav&lt;/a&gt; :&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;em&gt;Of course if you set a broken theme or something the layout will be&lt;/em&gt;&#xA;  &lt;em&gt;broken but the os will not be destroyed if this is what you ask.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Here the link to the Github's project :&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;INSTALLATION&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Make sure you have software-properties-common&#xA;sudo apt search software-properties-common&#xA;&#xA;# Output exemple&#xA;Sorting... Done&#xA;Full Text Search... Done&#xA;software-properties-common/bionic,bionic,now 0.96.24.32.11+elementary7~ubuntu5.0.1 all [installed]&#xA;  manage the repositories that you install software from (common)&#xA;&#xA;# If it is not installed do it&#xA;sudo apt install software-properties-common&#xA;&#xA;# Install elementary-tweaks&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And if you want to remove the PPA as you suggest &lt;a href=&quot;https://elementaryos.stackexchange.com/users/19745/duality&quot;&gt;@duality&lt;/a&gt; you can do&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Remove ppa connection&#xA;sudo add-apt-repository --remove ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-10T17:15:33.103" LastActivityDate="2019-12-10T17:15:33.103" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21516" PostTypeId="2" ParentId="21512" CreationDate="2019-12-10T13:32:59.197" Score="3" Body="&lt;p&gt;Yes it is usable, personally I would install then remove the ppa:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Make sure you have software-properties-common&#xA;sudo apt install software-properties-common&#xA;&#xA;# Install elementary-tweaks&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&#xA;#Remove ppa connection&#xA;sudo add-apt-repository --remove ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-10T13:32:59.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21517" PostTypeId="2" ParentId="3924" CreationDate="2019-12-10T13:35:57.883" Score="0" Body="&lt;p&gt;Take a look at this post, and see if it helps&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[&lt;a href=&quot;https://medium.com/@overcode/fixing-bluetooth-in-ubuntu-pop-os-18-04-d4b8dbf7ddd6][1]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@overcode/fixing-bluetooth-in-ubuntu-pop-os-18-04-d4b8dbf7ddd6][1]&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-10T13:35:57.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21518" PostTypeId="2" ParentId="21418" CreationDate="2019-12-10T13:45:54.973" Score="0" Body="&lt;p&gt;I found a working solution. Here is the &lt;a href=&quot;https://github.com/wroberts/rogauracore&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; to the github repository of the project &lt;strong&gt;rogauracore&lt;/strong&gt; by &lt;strong&gt;wroberts&lt;/strong&gt;.&lt;/p&gt;&#xA;" OwnerUserId="19700" LastActivityDate="2019-12-10T13:45:54.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21521" PostTypeId="2" ParentId="7311" CreationDate="2019-12-10T14:32:15.817" Score="0" Body="&lt;p&gt;I believe you'll need a &lt;a href=&quot;https://valadoc.org/granite/Granite.MessageDialog.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Granite.MessageDialog&lt;/a&gt;. This a sample of how I used it to achieve something similar:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;public class Server.Dialog : Granite.MessageDialog {&#xA;&#xA;    public Dialog (Gee.ArrayList&amp;lt;Server.Model&amp;gt; serversList) {&#xA;        Object (&#xA;            primary_text : &quot;Welcome to Torrential Remote!&quot;,&#xA;            secondary_text : &quot;Start by connecting to a server.&quot;,&#xA;            image_icon : GLib.Icon.new_for_string (&quot;application-default-icon&quot;),&#xA;            buttons : Gtk.ButtonsType.NONE&#xA;        );&#xA;&#xA;        set_modal (true); // forces user interaction&#xA;        set_transient_for (null); // sets no parent window&#xA;        add_buttons (&quot;Cancel&quot;, Gtk.ResponseType.CANCEL, &quot;Save&quot;, Gtk.ResponseType.ACCEPT, null);&#xA;&#xA;        Gtk.Grid grid = new Gtk.Grid ();&#xA;        grid.set_column_spacing (10);&#xA;        grid.set_row_spacing (10);&#xA;&#xA;        Gtk.Entry nameEntry = new Gtk.Entry ();&#xA;        nameEntry.set_hexpand (true);&#xA;        Gtk.Label nameLabel = new Gtk.Label (&quot;Name:&quot;);&#xA;        nameLabel.set_halign(Gtk.Align.END);&#xA;        grid.attach(nameLabel, 0, 1, 1, 1);&#xA;        grid.attach(nameEntry, 1, 1, 3, 1);&#xA;&#xA;        Gtk.Entry hostEntry = new Gtk.Entry ();&#xA;        hostEntry.set_hexpand (true);&#xA;        Gtk.Label hostLabel = new Gtk.Label (&quot;Host:&quot;);&#xA;        hostLabel.set_halign(Gtk.Align.END);;&#xA;        grid.attach(hostLabel, 0, 2, 1, 1);&#xA;        grid.attach(hostEntry, 1, 2, 3, 1);&#xA;&#xA;        custom_bin.add (grid);&#xA;&#xA;        get_widget_for_response (Gtk.ResponseType.ACCEPT).can_default = true;&#xA;        set_default_response (Gtk.ResponseType.ACCEPT);&#xA;        grid.show_all();&#xA;&#xA;&#xA;        int response = run ();&#xA;        if (response == Gtk.ResponseType.ACCEPT) {&#xA;            string name = nameEntry.text;&#xA;            string host = hostEntry.text;&#xA;            // Do your logic here&#xA;        }&#xA;&#xA;        destroy ();&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mqzPD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mqzPD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-10T14:32:15.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21522" PostTypeId="2" ParentId="21505" CreationDate="2019-12-10T15:27:39.567" Score="0" Body="&lt;p&gt;You can take a look in &lt;code&gt;~/.local/share/io.elementary.photos/data/&lt;/code&gt; to see if it contains what you need.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-10T15:27:39.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21523" PostTypeId="1" CreationDate="2019-12-10T15:58:46.403" Score="0" ViewCount="227" Body="&lt;p&gt;I have FHD modified Lenovo x230. (Details about the mod here &lt;a href=&quot;https://forum.thinkpads.com/viewtopic.php?f=43&amp;amp;t=122640&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.thinkpads.com/viewtopic.php?f=43&amp;amp;t=122640&lt;/a&gt;) Mod creates an actual FHD display connected to DP-3 but also a fantom, &lt;strong&gt;&quot;dummy display&quot;&lt;/strong&gt; LVDS-1 used for brightness control, normally LVDS-1 is connected to laptop screen but not anymore in my case. I had this mod working for a few years now and I have been using it with a previous Elementary OS Loki version without much problems however small modification to it's config files was necessary to allow X11 to use the correct display. As far as I remember this have been done similar to the way described here: &lt;a href=&quot;https://forum.thinkpads.com/viewtopic.php?f=43&amp;amp;t=122640&amp;amp;p=805876&amp;amp;hilit=X11#p805876&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.thinkpads.com/viewtopic.php?f=43&amp;amp;t=122640&amp;amp;p=805876&amp;amp;hilit=X11#p805876&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm afraid I'm not 100% sure if this was the exact method I've used to achieve this but it's kind of rings the bell for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i decided to install a new version of elementary OS I've completely forgot that this have to be completed to have a fully working system. Unfortunately I went ahead and done it :)&lt;br&gt;&#xA;I do have a working OS but just a blank desktop without an easy way to interact with the system as I cannot see plank etc.&lt;br&gt;&#xA;I cannot access terminal with &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; for some reason but I was able to open programs using &lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; and typing program name (this doesn't work for terminal though), this way they do open on the screen I can see. I was trying to diagnose the problem by accessing one of terminal windows using &lt;kbd&gt;CTRL&lt;/kbd&gt;+&lt;kbd&gt;ALT&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; but even when I try to run xrandr it comes back with &lt;strong&gt;&quot;Can't open display&quot;&lt;/strong&gt; so I'm not sure what is going on.&#xA;I was trying to check for the files mentioned in the post from thinkpads forum but there is no &lt;code&gt;/etc/X11/xorg.conf.d&lt;/code&gt; catalog or &lt;code&gt;~/.config/monitors.xml&lt;/code&gt; and &lt;code&gt;/var/lib/lightdm/.config/monitors.xml&lt;/code&gt; files in Hera.&#xA;I'm not sure if the current version of Elementary OS is actually still using X11 or maybe it is all Wayland now?&#xA;Can anyone please advise me which files would have to be modified to have all the elements mirrored between LVDS-1 and DP-3 as I think this will be the easiest way to have it working again?&#xA;Which files both lightdm and panthon are using for monitor settings now?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would really appreciate any help with this.&lt;/p&gt;&#xA;" OwnerUserId="11915" LastEditorUserId="16827" LastEditDate="2019-12-11T11:43:35.393" LastActivityDate="2019-12-15T17:39:56.027" Title="Setting up primary monitor on FHD modified Lenovo x230 on elementary OS Hera" Tags="|settings|release-hera|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21524" PostTypeId="2" ParentId="21478" CreationDate="2019-12-10T16:10:22.533" Score="0" Body="&lt;p&gt;&lt;strong&gt;SOLUTION TO QUESTION&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/922860/pairing-apple-airpods-as-headset/1063582#1063582&quot;&gt;To pair airpods&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/Ubuntu/comments/8dmnfk/airpods_with_ubuntu_1704_too_low_volume/&quot; rel=&quot;nofollow noreferrer&quot;&gt;To fix volume issue&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So glad I got this working :) &lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-10T16:10:22.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21526" PostTypeId="2" ParentId="17445" CreationDate="2019-12-10T16:42:51.210" Score="1" Body="&lt;p&gt;Try this one:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then a prompt will appear, you can use the &quot;Tab&quot; key on keyboard to select the option. Select &quot;Yes&quot; and press &quot;Enter&quot; key. If the next time you face this issue, select &quot;No&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The original answer is &lt;a href=&quot;https://askubuntu.com/questions/1094062/libdvd-pkg-apt-get-check-failed-you-may-have-broken-packages-aborting&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19781" LastActivityDate="2019-12-10T16:42:51.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21527" PostTypeId="2" ParentId="21523" CreationDate="2019-12-10T18:00:08.333" Score="1" Body="&lt;p&gt;Yes, elementary OS still uses X. I do not have the device you do, but I believe a good start would be to create the files you need, as instructed in the links you provided.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do have a &lt;code&gt;~/.config/monitors.xml&lt;/code&gt;, so you can safely create it (&lt;code&gt;nano ~/.config/monitors.xml&lt;/code&gt;), with the following contents:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;monitors version=&quot;1&quot;&amp;gt;&#xA;  &amp;lt;configuration&amp;gt;&#xA;    &amp;lt;clone&amp;gt;yes&amp;lt;/clone&amp;gt;&#xA;    &amp;lt;output name=&quot;DP3&quot;&amp;gt;&#xA;      &amp;lt;vendor&amp;gt;SHP&amp;lt;/vendor&amp;gt;&#xA;      &amp;lt;product&amp;gt;0x141f&amp;lt;/product&amp;gt;&#xA;      &amp;lt;serial&amp;gt;0x00000000&amp;lt;/serial&amp;gt;&#xA;      &amp;lt;width&amp;gt;1920&amp;lt;/width&amp;gt;&#xA;      &amp;lt;height&amp;gt;1080&amp;lt;/height&amp;gt;&#xA;      &amp;lt;rate&amp;gt;59.933879852294922&amp;lt;/rate&amp;gt;&#xA;      &amp;lt;x&amp;gt;0&amp;lt;/x&amp;gt;&#xA;      &amp;lt;y&amp;gt;0&amp;lt;/y&amp;gt;&#xA;      &amp;lt;rotation&amp;gt;normal&amp;lt;/rotation&amp;gt;&#xA;      &amp;lt;reflect_x&amp;gt;no&amp;lt;/reflect_x&amp;gt;&#xA;      &amp;lt;reflect_y&amp;gt;no&amp;lt;/reflect_y&amp;gt;&#xA;      &amp;lt;primary&amp;gt;no&amp;lt;/primary&amp;gt;&#xA;      &amp;lt;presentation&amp;gt;no&amp;lt;/presentation&amp;gt;&#xA;      &amp;lt;underscanning&amp;gt;no&amp;lt;/underscanning&amp;gt;&#xA;    &amp;lt;/output&amp;gt;&#xA;    &amp;lt;output name=&quot;LVDS1&quot;&amp;gt;&#xA;      &amp;lt;vendor&amp;gt;ZLX&amp;lt;/vendor&amp;gt;&#xA;      &amp;lt;product&amp;gt;Dummy display&amp;lt;/product&amp;gt;&#xA;      &amp;lt;serial&amp;gt;D2U040082    &amp;lt;/serial&amp;gt;&#xA;      &amp;lt;width&amp;gt;1920&amp;lt;/width&amp;gt;&#xA;      &amp;lt;height&amp;gt;1080&amp;lt;/height&amp;gt;&#xA;      &amp;lt;rate&amp;gt;60.034385681152344&amp;lt;/rate&amp;gt;&#xA;      &amp;lt;x&amp;gt;0&amp;lt;/x&amp;gt;&#xA;      &amp;lt;y&amp;gt;0&amp;lt;/y&amp;gt;&#xA;      &amp;lt;rotation&amp;gt;normal&amp;lt;/rotation&amp;gt;&#xA;      &amp;lt;reflect_x&amp;gt;no&amp;lt;/reflect_x&amp;gt;&#xA;      &amp;lt;reflect_y&amp;gt;no&amp;lt;/reflect_y&amp;gt;&#xA;      &amp;lt;primary&amp;gt;yes&amp;lt;/primary&amp;gt;&#xA;      &amp;lt;presentation&amp;gt;no&amp;lt;/presentation&amp;gt;&#xA;      &amp;lt;underscanning&amp;gt;no&amp;lt;/underscanning&amp;gt;&#xA;    &amp;lt;/output&amp;gt;&#xA;  &amp;lt;/configuration&amp;gt;&#xA;&amp;lt;/monitors&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In nano, press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;O&lt;/kbd&gt; to save, followed by &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt; to close it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running a &lt;code&gt;locate xorg.conf&lt;/code&gt; will reveal this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/X11/xorg.conf.d&#xA;/usr/share/X11/xorg.conf.d/10-amdgpu.conf&#xA;/usr/share/X11/xorg.conf.d/10-nvidia.conf&#xA;/usr/share/X11/xorg.conf.d/10-quirks.conf&#xA;/usr/share/X11/xorg.conf.d/10-radeon.conf&#xA;/usr/share/X11/xorg.conf.d/40-libinput.conf&#xA;/usr/share/X11/xorg.conf.d/70-wacom.conf&#xA;/usr/share/doc/xserver-xorg-video-intel-hwe-18.04/xorg.conf&#xA;/usr/share/man/man5/xorg.conf.5.gz&#xA;/usr/share/man/man5/xorg.conf.d.5.gz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, I suggest placing the &lt;code&gt;20-fhdmod.conf&lt;/code&gt; file in &lt;code&gt;/usr/share/X11/xorg.conf.d&lt;/code&gt; as well (&lt;code&gt;sudo nano /usr/share/X11/xorg.conf.d/20-fhdmod.conf&lt;/code&gt;), containing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;    Identifier  &quot;IntelCard&quot;&#xA;    BusID       &quot;PCI:0:2:0&quot;&#xA;    Driver  &quot;intel&quot;&#xA;    Option  &quot;DRI&quot; &quot;3&quot;&#xA;&#xA;    Option  &quot;ZaphodHeads&quot; &quot;DP-3&quot;&#xA;    Option  &quot;Virtualheads&quot;  &quot;0&quot;&#xA;&#xA;    #Option &quot;kmsdev&quot; &quot;/dev/dri/card0&quot;                    &#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT: Congrats on the modded X230 by the way, I plan to grab one for myself soon and mod it as well!&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-10T18:00:08.333" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21529" PostTypeId="1" AcceptedAnswerId="21551" CreationDate="2019-12-10T20:44:12.590" Score="0" ViewCount="216" Body="&lt;p&gt;I am getting stuck on the screen where you tell Elementary that you want to install updates and third party software. I've tried with none of the options on the screen chosen, and it still gets stuck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gFH7J.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gFH7J.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On a side note, I also had issues installing Elementary 5.1 on Windows 10's Hyper-V. It would never actually get to the point where it booted up the image. I will search the forum for help there.&lt;/p&gt;&#xA;" OwnerUserId="19787" LastActivityDate="2019-12-11T20:02:29.680" Title="How to install version 5.1 on Windows 10 VirtualBox" Tags="|system-installation|microsoft-windows|virtualbox|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21531" PostTypeId="1" CreationDate="2019-12-11T00:10:06.173" Score="1" ViewCount="104" Body="&lt;p&gt;I was running a laser cutting task and wanted to estimate how long it would take to complete by timing the completion of one cutout and multiplying it by the number of cutouts on the sheet. That's when I noticed the desktop clock does not display seconds.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's when I also realised that the clock settings are really sparse. There's no option of adding seconds or spelling out the weekday and month in full as exists in other OSs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way around this?&lt;/p&gt;&#xA;" OwnerUserId="19226" LastActivityDate="2019-12-11T09:28:38.310" Title="Can seconds be added to the clock?" Tags="|settings|time|clock|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21532" PostTypeId="1" CreationDate="2019-12-11T03:20:12.953" Score="2" ViewCount="2918" Body="&lt;p&gt;&lt;code&gt;Details&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;Session returned error code 1&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I was attempting to install VNC Server &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-and-configure-vnc-on-ubuntu-18-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;via this walk-through&lt;/a&gt;, but this is where I went wrong (hindsight being 20/20):&lt;br /&gt;&#xA;&lt;code&gt;sudo apt install xfce4 xfce4-goodies&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have created a new sudoer account, but I really want to get my original one working again. When I try to login to it, I see this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Kl7Qv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kl7Qv.png&quot; alt=&quot;unable_to_login&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here is the last bit of my &lt;code&gt;/var/log/lightdm/lightdm.log&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[+0.60s] DEBUG: Acquired bus name org.freedesktop.DisplayManager&#xA;[+0.60s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0&#xA;[+1.46s] DEBUG: Got signal 10 from process 808&#xA;[+1.46s] DEBUG: XServer 0: Got signal from X server :0&#xA;[+1.46s] DEBUG: XServer 0: Connecting to XServer :0&#xA;[+1.49s] DEBUG: Seat seat0: Display server ready, starting session authentication&#xA;[+1.49s] DEBUG: Session pid=828: Started with service 'lightdm-greeter', username 'lightdm'&#xA;[+1.50s] DEBUG: Session pid=828: Authentication complete with return value 0: Success&#xA;[+1.50s] DEBUG: Seat seat0: Session authenticated, running command&#xA;[+1.50s] DEBUG: Session pid=828: Running command /usr/lib/lightdm/lightdm-greeter-session /usr/sbin/io.elementary.greeter&#xA;[+1.50s] DEBUG: Creating shared data directory /var/lib/lightdm-data/lightdm&#xA;[+1.50s] DEBUG: Session pid=828: Logging to /var/log/lightdm/seat0-greeter.log&#xA;[+1.59s] DEBUG: Activating VT 7&#xA;[+1.59s] DEBUG: Activating login1 session c1&#xA;[+1.59s] DEBUG: Seat seat0 changes active session to c1&#xA;[+1.59s] DEBUG: Session c1 is already active&#xA;[+1.90s] DEBUG: Greeter connected version=1.26.0 api=1 resettable=false&#xA;[+2.36s] DEBUG: Greeter start authentication for drewadmin&#xA;[+2.36s] DEBUG: Session pid=975: Started with service 'lightdm', username 'drewadmin'&#xA;[+2.37s] DEBUG: Session pid=975: Got 1 message(s) from PAM&#xA;[+2.37s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+87.80s] DEBUG: Cancel authentication&#xA;[+87.80s] DEBUG: Session pid=975: Sending SIGTERM&#xA;[+87.80s] DEBUG: Greeter start authentication for andrew&#xA;[+87.80s] DEBUG: Session pid=1122: Started with service 'lightdm', username 'andrew'&#xA;[+87.80s] DEBUG: Session pid=975: Terminated with signal 15&#xA;[+87.80s] DEBUG: Session: Failed during authentication&#xA;[+87.80s] DEBUG: Seat seat0: Session stopped&#xA;[+87.81s] DEBUG: Session pid=1122: Got 1 message(s) from PAM&#xA;[+87.81s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+91.65s] DEBUG: Continue authentication&#xA;[+91.67s] DEBUG: Session pid=1122: Authentication complete with return value 0: Success&#xA;[+91.67s] DEBUG: Authenticate result for user andrew: Success&#xA;[+91.67s] DEBUG: User andrew authorized&#xA;[+91.68s] DEBUG: Greeter requests session xfce&#xA;[+91.68s] DEBUG: Seat seat0: Failed to find session configuration xfce&#xA;[+91.68s] DEBUG: Seat seat0: Can't find session 'xfce'&#xA;[+97.60s] DEBUG: Greeter start authentication for andrew&#xA;[+97.60s] DEBUG: Session pid=1126: Started with service 'lightdm', username 'andrew'&#xA;[+97.61s] DEBUG: Session pid=1126: Got 1 message(s) from PAM&#xA;[+97.61s] DEBUG: Prompt greeter with 1 message(s)&#xA;[+106.43s] DEBUG: Seat seat0 changes active session to &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So, my question is &lt;strong&gt;how can I stop lightdm from trying to use xfce?&lt;/strong&gt; I already tried &lt;code&gt;apt purge&lt;/code&gt; it, but it was apparently not enough.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Final update: I have deleted Elementary OS from this machine and installed Ubuntu instead. As such I will never know what the fix was, or if this was fixable. Sorry&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="19779" LastEditorUserId="19779" LastEditDate="2020-06-24T21:11:06.867" LastActivityDate="2020-07-24T22:00:20.047" Title="Cannot login to my original account: io.elementary.greeter Unable to Log In Starting the session has failed (Can't find session 'xfce')" Tags="|greeter|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21533" PostTypeId="1" CreationDate="2019-12-11T04:32:23.553" Score="0" ViewCount="113" Body="&lt;p&gt;After a recent update and &lt;code&gt;apt autoremove&lt;/code&gt;, the Elementary OS files app was somehow removed.  I tried to reinstall it from the appstore, only for it to complain that tumbler and tumbler extras needed installing (for thumbnail viewing, I presume?) but weren't going to be installed.  I tried to install it from the terminal, but received the warning that &lt;code&gt;libpoppler-glib8 (&amp;gt;= 0.18.0)&lt;/code&gt; was needed but wouldn't be installed with a message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried to &lt;code&gt;apt install libpoppler-glib8&lt;/code&gt; but received a similar error saying that &lt;code&gt;libpoppler85&lt;/code&gt; was a dependency but wouldn't be installed.  Tried the same for libpoppler85, but it simply says that it's already installed and the latest version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed the GUI Synaptic package manager and tried to install tumbler there, but same issues.  I tried&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then updated but with no results.  Something is wrong with my dependencies tree?  Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="19791" LastActivityDate="2023-12-22T14:02:55.437" Title="File manager deleted after update, now can't reinstall it (broken dependencies)" Tags="|pantheon-files|apt|package-management|dependencies|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21537" PostTypeId="2" ParentId="21529" CreationDate="2019-12-11T06:40:01.253" Score="0" Body="&lt;p&gt;try this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://24itworld.wordpress.com/2016/07/12/virtualization-first-steps-with-oracle-virtualbox/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary os on virtual box&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;its usually a straight foward task, have to ask, are you using a 32bit or 64bit? can that be and issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastely I would suggest using vmware player (free for personal and non-comercial use) and performance is better.&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-11T06:40:01.253" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21538" PostTypeId="2" ParentId="21531" CreationDate="2019-12-11T09:28:38.310" Score="2" Body="&lt;p&gt;Yes, you can run this in terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.desktop.wingpanel.datetime clock-show-seconds true&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you want to disable it replace true with false:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.desktop.wingpanel.datetime clock-show-seconds false&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-11T09:28:38.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21540" PostTypeId="1" CreationDate="2019-12-11T10:12:11.193" Score="2" ViewCount="1109" Body="&lt;p&gt;I would like to know if there is any possibility to change the configuration in Code App to set a Dark Theme instead of &quot;Solarized Dark&quot; or if there is any plugin to set a dark theme in Code App.&#xA;Thanks a lot&lt;/p&gt;&#xA;" OwnerUserId="19793" LastEditorUserId="9445" LastEditDate="2020-03-03T12:43:32.760" LastActivityDate="2022-05-31T08:57:41.003" Title="Dark theme on Elementary Code instead of &quot;Solarized Dark&quot;" Tags="|themes|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21541" PostTypeId="2" ParentId="21540" CreationDate="2019-12-11T11:14:03.450" Score="6" Body="&lt;p&gt;So, I managed to hack Code a bit in order to set a different theme. I like to have a consistent theme when using various editors, so I tried to make them look as close as possible. At the same time, I did not yet invest too much time into this.&lt;/p&gt;&#xA;&lt;p&gt;So, this is what I did:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I used &lt;a href=&quot;https://wiki.gnome.org/Projects/GtkSourceView/StyleSchemes&quot; rel=&quot;nofollow noreferrer&quot;&gt;GtkSourceView style schemes&lt;/a&gt; to find a theme close to my needs. I liked VSCode's dark style, so I chose &lt;a href=&quot;https://wiki.gnome.org/Projects/GtkSourceView/StyleSchemes?action=AttachFile&amp;amp;do=view&amp;amp;target=vsdark.xml&quot; rel=&quot;nofollow noreferrer&quot;&gt;VSDark&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a new file in &lt;code&gt;/usr/share/gtksourceview-4/styles&lt;/code&gt; with the contents of the xml file chosen above:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /usr/share/gtksourceview-4/styles/vsdark.xml&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?xml version=&amp;quot;1.0&amp;quot; encoding=&amp;quot;UTF-8&amp;quot;?&amp;gt;&#xA;&#xA;&amp;lt;style-scheme id=&amp;quot;vsdark&amp;quot; _name=&amp;quot;VSDark&amp;quot; version=&amp;quot;1.0&amp;quot;&amp;gt;&#xA;    &amp;lt;author&amp;gt;Daapii&amp;lt;/author&amp;gt;&#xA;    &amp;lt;_description&amp;gt;Inspired by the Visual Studio 2012 dark theme&amp;lt;/_description&amp;gt;&#xA;&#xA;&amp;lt;!-- COLORS --&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;comment_color&amp;quot; value=&amp;quot;#608b4e&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;number_color&amp;quot; value=&amp;quot;#b5cea8&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;string_color&amp;quot; value=&amp;quot;#d69d62&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;boolean_color&amp;quot; value=&amp;quot;#d69d62&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;keyword_color&amp;quot; value=&amp;quot;#4c9cd6&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;error_color&amp;quot; value=&amp;quot;#ff3333&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;text_fg&amp;quot; value=&amp;quot;#ffffff&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;text_bg&amp;quot; value=&amp;quot;#1e1e1e&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;line_highlight&amp;quot; value=&amp;quot;#0f0f0f&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;line_numbers&amp;quot; value=&amp;quot;#2b91af&amp;quot;/&amp;gt;&#xA;    &amp;lt;color name=&amp;quot;selection_color&amp;quot; value=&amp;quot;#264f78&amp;quot;/&amp;gt;&#xA;    &#xA;&#xA;&amp;lt;!-- Global Settings --&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;text&amp;quot; foreground=&amp;quot;text_fg&amp;quot; background=&amp;quot;text_bg&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;cursor&amp;quot; foreground=&amp;quot;text_fg&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;current-line&amp;quot; background=&amp;quot;line_highlight&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;line-numbers&amp;quot; foreground=&amp;quot;line_numbers&amp;quot; background=&amp;quot;text_bg&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;selection&amp;quot; background=&amp;quot;selection_color&amp;quot;/&amp;gt;&#xA;&#xA;&amp;lt;!-- Bracket Matching --&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;bracket-match&amp;quot; foreground=&amp;quot;text_bg&amp;quot; background=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;bracket-mismatch&amp;quot; background=&amp;quot;error_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;search-match&amp;quot; foreground=&amp;quot;comment_color&amp;quot; background=&amp;quot;text_fg&amp;quot;/&amp;gt;&#xA;&#xA;&amp;lt;!-- Base syntax colors&#xA;&#xA;Languages: plain, python, ruby, xml, html, ada, asp, awk, boo, c,&#xA;changelog, chdr, cmake, cpp, csharp, css, d, def, desktop, diff,&#xA;docbook, dosbatch, dot, dpatch, dtd, eiffel, erlang, forth, fortran,&#xA;gap, gtkrc, haddock, haskell, haskell-literate, idl, ini, java,&#xA;javascript, latex, libtool, lua, m4, makefile, msil, nermele, nsis,&#xA;objc, ocaml, ocl, octave, pascal, perl, php, pkgconfig, po, prolog,&#xA;R, rpmspec, scheme, sh, sql, t2t, tcl, texinfo, vala, vbnet, verilog,&#xA;vhdl, xslt, yacc&#xA;&#xA;--&amp;gt;&#xA;&#xA;    &amp;lt;style name=&amp;quot;def:string&amp;quot; foreground=&amp;quot;string_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:character&amp;quot; foreground=&amp;quot;string_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:special-char&amp;quot; foreground=&amp;quot;string_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:number&amp;quot; foreground=&amp;quot;number_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:decimal&amp;quot; foreground=&amp;quot;number_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:floating-point&amp;quot; foreground=&amp;quot;number_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:complex&amp;quot; foreground=&amp;quot;number_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:base-n-integer&amp;quot; foreground=&amp;quot;number_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:boolean&amp;quot; foreground=&amp;quot;boolean_color&amp;quot;/&amp;gt;&#xA;&#xA;    &amp;lt;style name=&amp;quot;def:builtin&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:keyword&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:function&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:type&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:preprocessor&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:identifier&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:operator&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:statement&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;&#xA;    &amp;lt;style name=&amp;quot;def:constant&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:special-constant&amp;quot; foreground=&amp;quot;keyword_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:error&amp;quot; foreground=&amp;quot;text_bg&amp;quot; background=&amp;quot;error_color&amp;quot;/&amp;gt;&#xA;&#xA;&amp;lt;!-- Comments --&amp;gt;&#xA;&#xA;    &amp;lt;style name=&amp;quot;def:comment&amp;quot; foreground=&amp;quot;comment_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:shebang&amp;quot; foreground=&amp;quot;comment_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:doc-comment-element&amp;quot; foreground=&amp;quot;comment_color&amp;quot;/&amp;gt;&#xA;    &amp;lt;style name=&amp;quot;def:note&amp;quot; foreground=&amp;quot;comment_color&amp;quot;/&amp;gt;&#xA;&#xA;&amp;lt;/style-scheme&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If using nano editor, use &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;O&lt;/kbd&gt; to save the file, and &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt; to exit nano.&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Set Code to use the new theme:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.code.settings style-scheme 'vsdark'&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Enjoy your new dark theme!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Code using Solarized Dark:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/56XER.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/56XER.png&quot; alt=&quot;Code using solarized-dark&quot; /&gt;&lt;/a&gt;&#xA;Code using VSDark:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lBVj7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lBVj7.png&quot; alt=&quot;Code using vsdark&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;(Optional) If you want to, you can edit the new theme to customize it even further. In the .xml file you can change the values of the colors.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;IMPORTANT: for this to work, the value in the gsettings command must be the same as the style-scheme id in the .xml file (vsdark in the example above). Code's style picker will NOT reflect the change: it still shows 'Solarized Dark' as selected.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2022-05-31T08:57:41.003" LastActivityDate="2022-05-31T08:57:41.003" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21542" PostTypeId="1" CreationDate="2019-12-11T11:22:55.483" Score="0" ViewCount="192" Body="&lt;p&gt;I am wondering if I can use Elementary OS on my new MacBook 16' (2019).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I have heard there are numerous problems; supporting the Macs Keyboard and it's Touchbar. Are there any options already out there. If not, I would consider creating this driver in my next year of University.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings,&#xA;Niclas&lt;/p&gt;&#xA;" OwnerUserId="19795" LastEditorUserId="19360" LastEditDate="2019-12-11T14:14:06.520" LastActivityDate="2019-12-11T14:14:06.520" Title="Is there an Apple Touchbar support? [MacBook Pro 16 - 2019]" Tags="|drivers|macintosh|software-recommendation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21546" PostTypeId="2" ParentId="21120" CreationDate="2019-12-11T16:31:29.037" Score="1" Body="&lt;p&gt;The recent kernel update from Elementary OS 5.1 resolved this issue. I was able to install eOS much sooner by building my own daily ISO but have since re-installed with the latest ISO and it works with the new HWE stack.&lt;/p&gt;&#xA;" OwnerUserId="16043" LastActivityDate="2019-12-11T16:31:29.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21547" PostTypeId="1" AcceptedAnswerId="21661" CreationDate="2019-12-11T16:32:03.023" Score="3" ViewCount="5100" Body="&lt;p&gt;After installing wingpanel-indicator-ayatana (available via some answer here) and rebooting, I've got two wi-fi indicators (ss below)&#xA;How can I get rid of one of them? Is there any way possible? I don't want to uninstall the indicator app because of dropbox, which I use daily.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1K4Pv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1K4Pv.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Found &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/e8dx1w/duplicate_wifi_indicators_after_enabling_support/&quot; rel=&quot;nofollow noreferrer&quot;&gt;This on reddit&lt;/a&gt;, will try it out just appending .old at the end of the name of the file.&lt;/p&gt;&#xA;" OwnerUserId="19799" LastEditorUserId="19799" LastEditDate="2019-12-11T17:47:13.943" LastActivityDate="2021-10-13T08:26:50.873" Title="Double Wi-Fi icon after installing wingpanel-indicator-ayatana" Tags="|wingpanel|wifi|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21548" PostTypeId="1" CreationDate="2019-12-11T19:10:31.507" Score="0" ViewCount="52" Body="&lt;p&gt;I am trying to install eOS 5.1 on my Dell Inspiron 3782. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I could create the USB drive on the very same laptop with Ubuntu 18.04 pre installed, I could boot with USB but All I see is the desktop screen and nothing happens. The funny thing is that I can use Function keys and they work (I can tune the volume and I can hear the sound, I can tune the keyboard backlight and the screen). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The dock goes back and forth, and I tried some keyboard shortcuts but nothing happens. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you help me or should I restore Ubuntu?!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZgpfA.jpg&quot; alt=&quot;stuck desktop&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[EDIT]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found some additional commands to use in the grub menu but no luck. I had my laptop restored to Ubuntu 18.04 and I find out that I could install elementary OS desktop, but it is not a smooth OS, maybe my (cheap) laptop is not capable to run Elementary OS. Switching back to Ubuntu with Wayland is the better option for me.&lt;/p&gt;&#xA;" OwnerUserId="19800" LastEditorUserId="16827" LastEditDate="2019-12-12T18:49:21.397" LastActivityDate="2019-12-12T18:49:21.397" Title="Can not install hera on Dell Inspiron 3782" Tags="|system-installation|release-hera|dell|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21549" PostTypeId="1" AcceptedAnswerId="21550" CreationDate="2019-12-11T19:17:18.850" Score="0" ViewCount="73" Body="&lt;p&gt;I installed elementary OS 5.1 Hera on my Lenovo X1 Carbon 7th Gen, but the volume rocker doesn't work when playing audio on the speakers. I can put it on maximum or minimum but there is no change in the actual volume. The only thing that works is muting. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Curiously this only happens when playing audio on the speakers. When I use headphones or Bluetooth speakers it works fine. Any idea on what's causing the issue or how to solve it?&lt;/p&gt;&#xA;" OwnerUserId="19801" LastActivityDate="2019-12-11T19:42:38.767" Title="Volume rocker doesn't change volume when using speakers - Lenovo X1 Carbon 7th Gen" Tags="|audio|release-hera|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21550" PostTypeId="2" ParentId="21549" CreationDate="2019-12-11T19:42:38.767" Score="0" Body="&lt;p&gt;Take a look at the instructions here &lt;a href=&quot;https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_7)#Audio&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X1_Carbon_(Gen_7)#Audio&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-11T19:42:38.767" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21551" PostTypeId="2" ParentId="21529" CreationDate="2019-12-11T20:02:29.680" Score="0" Body="&lt;p&gt;I went through and followed the directions that VMWare provides to disable Device Guard. Looks like it's going to work - past where I got with VirtualBox.&lt;/p&gt;&#xA;" OwnerUserId="19787" LastActivityDate="2019-12-11T20:02:29.680" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21552" PostTypeId="1" CreationDate="2019-12-11T22:15:57.043" Score="3" ViewCount="401" Body="&lt;p&gt;When I try to change volume on-fly, i always hear that annoying blop blop sound.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure whose idea it was to make it default, but it's driving me nuts. Can I disable it?! Thanks.&lt;/p&gt;&#xA;" OwnerUserId="19804" LastActivityDate="2019-12-12T18:50:20.547" Title="Can you disable that annoying &quot;blop blop&quot; sound in volume?" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21554" PostTypeId="2" ParentId="21552" CreationDate="2019-12-11T23:03:24.667" Score="3" Body="&lt;p&gt;'...the annoying blop blop sound...' what a wonderful description!&#xA;The following commands did it for me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tell the system to stop emitting the blop:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.sound event-sounds false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart the audio service:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;pulseaudio -k&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PERMANENT SOLUTION:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only solution I could find that accurately works seems to be to rename (or delete) the actual audio file used for the blop blop.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo mv /usr/share/sounds/elementary/stereo/audio-volume-change.wav /usr/share/sounds/elementary/stereo/audio-volume-change.bak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-12T18:50:20.547" LastActivityDate="2019-12-12T18:50:20.547" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21555" PostTypeId="2" ParentId="21532" CreationDate="2019-12-11T23:25:56.807" Score="0" Body="&lt;p&gt;I didn't install any shells. Just did an update 5.0 to 5.1 and after reboot have the same situation and search session 'pantheon'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[+0.95s] DEBUG: Seat seat0: Failed to find session configuration pantheon&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[+0.95s] DEBUG: Seat seat0: Can't find session 'pantheon'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[+0.95s] DEBUG: Seat seat0: Creating greeter session&lt;/p&gt;&#xA;" OwnerUserId="19805" LastActivityDate="2019-12-11T23:25:56.807" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21556" PostTypeId="2" ParentId="21498" CreationDate="2019-12-12T01:19:46.600" Score="0" Body="&lt;p&gt;You could try using AutoKey, it's a software for shortcuts, there is a functionality that allows you to make hotkeys for specifics task, if you know Python then u can try it out&lt;/p&gt;&#xA;" OwnerUserId="19236" LastActivityDate="2019-12-12T01:19:46.600" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21557" PostTypeId="1" CreationDate="2019-12-12T02:53:42.710" Score="0" ViewCount="118" Body="&lt;p&gt;Installed update &lt;code&gt;libpoppler85 Version: 0.74.0-0ubuntu1.2&lt;/code&gt; from the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next thing I realize my stock elementary file manager is no longer installed. Tried reinstalling, but it gave me an error of broken packages. Tried to fix broken packages from synaptic, still doesnt work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem solved&lt;/strong&gt; after downgrading back to &lt;code&gt;libpoppler85_0.74.0-0ubuntu1&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just posting if anyone having the same problem or if there's an fix for this. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I'm new to eOS and linux in general.&lt;/p&gt;&#xA;" OwnerUserId="19807" LastEditorUserId="16827" LastEditDate="2019-12-12T18:31:50.677" LastActivityDate="2019-12-13T14:44:37.327" Title="Latest poppler update broke my file manager" Tags="|pantheon-files|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21558" PostTypeId="2" ParentId="21533" CreationDate="2019-12-12T03:02:41.500" Score="0" Body="&lt;p&gt;Has this same problem. Latest libpoppler85 (0.74.0 ubuntu1.2) caused this for me.&#xA;Reverting back to libpoppler85 (0.74.0 ubuntu1) fixed it for me for the moment. &lt;/p&gt;&#xA;" OwnerUserId="19807" LastActivityDate="2019-12-12T03:02:41.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21559" PostTypeId="1" CreationDate="2019-12-12T04:22:37.323" Score="0" ViewCount="961" Body="&lt;p&gt;Excuse me.&#xA;I am a newer on linux. Because my Mac air is older. And i found elementary OS is a good solution on old mac air. So i installed it. It’s beautiful. But I have a problem to use it. It has something problem on my screen. Please see the picture under it.i just installed the elementary OS directly, did not install anything,it has the screen problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o39my.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o39my.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Mac air is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kGGMc.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kGGMc.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when i opened the AppCenter. It appeared has two apps to install as free.&#xA; Then I installed the Nvidia 340.107 .&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qmRF2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qmRF2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It’s bad. I can’t open my Mac again. When open my mac. The screen is black. and stop, can not enter it, Maybe the nivida driver 304 is not support to my Mac. Then i searched it on nvidia website.  I found nvidia 340.1010 to support GEFORCE 320M.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oiQmG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oiQmG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;a href=&quot;https://i.stack.imgur.com/smdSY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/smdSY.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how can I use it and run it on my Mac. Please help me. I have restored my computer for 3 times.  So amazing. Because I like elementary OS. So i didn’t give up. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this time. I installed pop_s! It has nvidia OS,it is ok, screen does not has any problem. But the system made my mac so slow. At last I back to elementary OS.  Please help me to solve the screen problem. Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your truly!&lt;/p&gt;&#xA;" OwnerUserId="19809" LastEditorUserId="16827" LastEditDate="2019-12-17T16:02:08.357" LastActivityDate="2024-02-29T00:07:15.900" Title="Help me on elementary OS about nvidia driver" Tags="|nvidia|macbook|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21560" PostTypeId="1" CreationDate="2019-12-12T04:48:14.960" Score="1" ViewCount="131" Body="&lt;p&gt;I'm returning to eOs after using Freya for a while and have successfully installed ElementaryOs 5.1 on an iMac (2009 or so, believe it was 11,2) and really like the updates y'all have made!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm having one issue that I cannot resolve, it seems widespread:&#xA;on boot, I have to add &lt;code&gt;nomodeset&lt;/code&gt; to the grub boot options for the display to show anything. The OS boots and I can turn the volume up and down, open a terminal and run commands, just no GUI! Doing day to day things with nomodeset is ok, but even basic web development running Atom, Chromium and a local server in terminal is causing crashes so I'd love to get this sorted and use the GPU!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setup:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~ lspci&#xA;&#xA;01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96-XT [Mobility Radeon HD 4670]&#xA;01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] RV710/730 HDMI Audio [Radeon HD 4000 series]&#xA;&#xA;~ glxinfo | grep OpenGL&#xA;&#xA;OpenGL vendor string: VMware, Inc.&#xA;OpenGL renderer string: llvmpipe (LLVM 8.0, 128 bits)&#xA;OpenGL core profile version string: 3.3 (Core Profile) Mesa 19.0.8&#xA;OpenGL core profile shading language version string: 3.30&#xA;OpenGL core profile context flags: (none)&#xA;OpenGL core profile profile mask: core profile&#xA;OpenGL core profile extensions:&#xA;OpenGL version string: 3.1 Mesa 19.0.8&#xA;OpenGL shading language version string: 1.40&#xA;OpenGL context flags: (none)&#xA;OpenGL extensions:&#xA;OpenGL ES profile version string: OpenGL ES 3.0 Mesa 19.0.8&#xA;OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00&#xA;OpenGL ES profile extensions:&#xA;&#xA;~ uname -r&#xA;&#xA;5.0.0-37-generic&#xA;&#xA;CPU from about: Dual-Core Intel® Core™ i3 CPU         540  @ 3.07GHz&#xA;GPU from about: Advanced Micro Devices, Inc. [AMD/ATI] RV730/M96-XT [Mobility Radeon HD 4670]&#xA;4GB ram, 500gb storage&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What I've tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;installing proprietary AMD drivers from their website, crashed the whole thing had to reinstall&lt;/li&gt;&#xA;&lt;li&gt;some software from Poland? Netext73, can't recommend it, was not even able to purge the thing&lt;/li&gt;&#xA;&lt;li&gt;installing update manager and using the &quot;additional drivers&quot; tab to detect drivers, no drivers are detected here much to my chagrin&lt;/li&gt;&#xA;&lt;li&gt;I did accept the third party drivers &amp;amp; software during installation&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4761/amd-radeon-r5-m335-gpu-not-detected-correctly?rq=1&quot;&gt;This similar question&lt;/a&gt; suggests using &lt;code&gt;fglrx&lt;/code&gt;, could someone explain what that means and how to do that? Getting a little tired of reinstalling the OS and would love to just get it right the next time!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did some digging about it and found &lt;a href=&quot;https://help.ubuntu.com/community/BinaryDriverHowto/AMD&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/BinaryDriverHowto/AMD&lt;/a&gt;, indicating that after &lt;code&gt;ubuntu 16.04&lt;/code&gt;, only open source radeon drivers are available, &lt;code&gt;radeon&lt;/code&gt; and &lt;code&gt;AMDGPU&lt;/code&gt;. The &lt;code&gt;radeon&lt;/code&gt; home page lead me to this package: &lt;code&gt;xf86-video-ati&lt;/code&gt;, which I see is not installed on my system, is that the one need? Running &lt;code&gt;man radeon&lt;/code&gt; did output a list that includes my GPU...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Neither &lt;code&gt;apt install radeon&lt;/code&gt; nor &lt;code&gt;apt install xf86-video-ati&lt;/code&gt; resulted in any packages being found and I'm reading that the necessary driver should have come with ubuntu by default, so why do I only get a screen with nomodeset?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: when I attach a second monitor by hdmi that second monitor works without issue. On the connected monitor I can control the brightness, with nomodeset on the original built in display I cannot... potential clues?&lt;/p&gt;&#xA;" OwnerUserId="5086" LastEditorUserId="5086" LastEditDate="2019-12-13T16:06:30.547" LastActivityDate="2023-03-21T14:58:11.213" Title="Display issues running elementary on an iMac: black screen on boot and does not wake from suspend" Tags="|display|drivers|amd|radeon|apple|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21561" PostTypeId="1" CreationDate="2019-12-12T06:25:53.853" Score="0" ViewCount="30" Body="&lt;p&gt;See below same video comparing image, how to fix Adiuence?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementry video player&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XXyMy.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XXyMy.jpg&quot; alt=&quot;Elementary Video Player&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;VLC video player&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ln1KM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ln1KM.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19745" LastEditorUserId="12483" LastEditDate="2019-12-13T14:58:15.923" LastActivityDate="2019-12-13T14:58:15.923" Title="Is there a way to set the default contrast settings in Aduience?" Tags="|videos|video-player|audience|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21562" PostTypeId="2" ParentId="21559" CreationDate="2019-12-12T08:34:14.287" Score="0" Body="&lt;p&gt;You better not install the driver from the Nvidia website, most of the people who do this complain for problems later. Instead you can try the appCenter first, use the &quot;Installed&quot; tab on top and &lt;strong&gt;wait for a while&lt;/strong&gt;. A list of Nvidia drivers should appear there. I do not know about the macs, but my laptop works well with the latest version of the driver, you can start with it. But it is important to wait until the information is fetched. If this do not work, you can try using terminal, type there &lt;code&gt;sudo ubuntu-drivers autoinsall&lt;/code&gt; the system will ask for your admin password - you have to enter it.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-13T00:31:07.613" LastActivityDate="2019-12-13T00:31:07.613" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21564" PostTypeId="2" ParentId="19102" CreationDate="2019-12-12T08:48:20.267" Score="3" Body="&lt;p&gt;In addition to what &lt;a href=&quot;https://elementaryos.stackexchange.com/users/13310/pieter-de-clercq&quot;&gt;Pieter&lt;/a&gt; shared in his &lt;a href=&quot;https://elementaryos.stackexchange.com/a/19472/15156&quot;&gt;answer&lt;/a&gt;, I had to take the following additional steps before I could receive files from a Windows 10 laptop:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;After installing blueman, restart the computer and open the applet (It might be possible to run the applet without restarting: &lt;code&gt;blueman-applet&lt;/code&gt;).&lt;/li&gt;&#xA;&lt;li&gt;Click on the applet icon and select &quot;Devices...&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Select the Bluetooth device that you want to receive files from.&lt;/li&gt;&#xA;&lt;li&gt;Make it trusted, either from the toolbar button, or from its context menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The crux is probably that blueman differentiates between trusted devices and connected but untrusted devices. It will automatically accept files only from trusted devices. It seems like there is no way to accept a file transfer from the gala notification, nor is there any way to mark a device as trusted except within blueman.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I am on elementary OS 5.1 Hera, blueman 2.0.5-1ubuntu1&lt;/p&gt;&#xA;" OwnerUserId="15156" LastEditorUserId="15156" LastEditDate="2019-12-16T09:38:43.363" LastActivityDate="2019-12-16T09:38:43.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21567" PostTypeId="1" AcceptedAnswerId="21581" CreationDate="2019-12-12T09:51:08.827" Score="1" ViewCount="780" Body="&lt;p&gt;I am able to connect to my webdav server via Pantheon but I would like to be able to access it permanently and directly, even after reboot. Currently, it does not remember the connection and I have to establish the connection every time. Is there a way around it?&#xA;Found this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14447/pantheon-files-network-server-not-showing-after-reboot/15567#15567&quot;&gt;Pantheon-files: network server not showing after reboot&lt;/a&gt; but I could not understand the procedure (and I don't have enough reputation to comment on it yet, sorry about that). &lt;/p&gt;&#xA;" OwnerUserId="19816" LastEditorUserId="9445" LastEditDate="2019-12-13T15:01:51.820" LastActivityDate="2019-12-13T15:01:51.820" Title="Connect automatically to a webdav server via pantheon (even after reboot)" Tags="|pantheon|webdav|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21568" PostTypeId="1" AcceptedAnswerId="21570" CreationDate="2019-12-12T10:54:59.880" Score="0" ViewCount="86" Body="&lt;p&gt;Here's what I get when I try to uninstall/install. I tried with various apt-get purge/clean commands but same happens...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dooM1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dooM1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19817" LastActivityDate="2019-12-12T11:35:44.123" Title="Cannot reinstall Libreoffice in Appcenter (broken uninstall ?)" Tags="|libreoffice|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21569" PostTypeId="2" ParentId="21568" CreationDate="2019-12-12T11:29:25.680" Score="1" Body="&lt;p&gt;Ok, so I didn't know the exact name of the package, but apt-get install libreoffice-writer helped and re-linked everything in app center.&lt;/p&gt;&#xA;" OwnerUserId="19817" LastActivityDate="2019-12-12T11:29:25.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21570" PostTypeId="2" ParentId="21568" CreationDate="2019-12-12T11:35:44.123" Score="1" Body="&lt;p&gt;Do you want to mark as answered please, so people facing similar can try:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install libreoffice-writer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-12T11:35:44.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21572" PostTypeId="2" ParentId="21533" CreationDate="2019-12-12T12:02:50.623" Score="0" Body="&lt;p&gt;Looks like you have the wrong version of one of the dependencies (or dependency of a dependency ...) in the repository stopping Files being re-installed.  Not clear how this happened.  Are you running ElementaryOS? Which version? Did you make any amendments to the repository settings or install new ones?  Did you make a clean install of the OS or is it upgraded from a previous version.   It may be quicker in the long run to save all your data to external media, make clean install of the OS and then reinstall your data.  Elementary does not really support upgrading from the previous version as far as I am aware.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2019-12-12T12:02:50.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21573" PostTypeId="2" ParentId="16564" CreationDate="2019-12-12T12:22:09.143" Score="0" Body="&lt;p&gt;For some reason, in Ubuntu 18.04, the MySQL workbench will also have the same issue, try this and it works for me. &lt;a href=&quot;https://robbinespu.github.io/eng/2018/03/29/Reset_mariadb_root_password.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Reference&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19818" LastActivityDate="2019-12-12T12:22:09.143" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21574" PostTypeId="2" ParentId="21410" CreationDate="2019-12-12T12:27:33.500" Score="0" Body="&lt;p&gt;when booting from usb, select try before installing, then make sure you are online before beginning the installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have had this problem before where it would only work if I was downloading and installing updates.&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2019-12-12T12:27:33.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21576" PostTypeId="2" ParentId="21557" CreationDate="2019-12-12T13:25:44.937" Score="2" Body="&lt;p&gt;Welcome in elementary OS community&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what is &lt;code&gt;libpoppler85&lt;/code&gt; but I think is dependencies package from specific apps but I don't know but which one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For repair broken package you can do that&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update --fix-missing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;personally I often use the second command following the manual installation of a &lt;code&gt;.deb&lt;/code&gt; to install dependencies&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For more information you can follow &lt;a href=&quot;https://elementaryos.stackexchange.com/users/19745/duality&quot;&gt;@Duality&lt;/a&gt;'s link &lt;a href=&quot;https://www.maketecheasier.com/fix-broken-packages-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to Fix Broken Packages in Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;INSTALL PACKAGE LOCALLY&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install ./PACKAGENAME.deb&#xA;$ sudo apt install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;DOWNGRAD PACKAGE&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I saw that you solved your problem by downgrading your package, I think you had to do something like that&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install libpoppler85=0.74.0-0ubuntu1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get -t=0.74.0-0ubuntu1 install libpoppler85&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-13T14:44:37.327" LastActivityDate="2019-12-13T14:44:37.327" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21577" PostTypeId="1" CreationDate="2019-12-12T13:53:21.447" Score="0" ViewCount="102" Body="&lt;p&gt;I have HP 15-db0058nt notebook which has Ryzen 3 2200u with Vega 3 GPU. 12 Gigs of ram installed and has stock 128 GB ssd. Can i use Elementary OS without any issues?&lt;/p&gt;&#xA;" OwnerUserId="19820" LastActivityDate="2019-12-12T14:05:19.817" Title="Is my pc competible with Elementary OS?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ClosedDate="2019-12-12T18:39:48.973" ContentLicense="CC BY-SA 4.0" />
  <row Id="21578" PostTypeId="2" ParentId="21577" CreationDate="2019-12-12T14:05:19.817" Score="0" Body="&lt;p&gt;Here you have all informations for minimum system requirements&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#download-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#download-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Recommended System Specifications : From December 2019&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;AMD  Ryzen 3 2200u is compatible with linux 64Bit&lt;/strong&gt;, you have all informations here :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.amd.com/en/products/apu/amd-ryzen-3-2200u&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.amd.com/en/products/apu/amd-ryzen-3-2200u&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think your &lt;strong&gt;Vega 3 GPU. 12 Gigs&lt;/strong&gt; will not have a problem&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-12T14:05:19.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21579" PostTypeId="2" ParentId="21321" CreationDate="2019-12-12T14:24:46.273" Score="1" Body="&lt;p&gt;Well, I've find out the problem: I've used &lt;code&gt;ppa:elementary-os/stable&lt;/code&gt; repo that has issue with dependencies gala &amp;lt;-&gt; libmutter. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I've removed this ppa using &lt;code&gt;ppa-purge&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ppa-purge ppa:elementary-os/stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and installed instead &lt;code&gt;ppa:elementary-os/daily&lt;/code&gt; + &lt;code&gt;ppa:elementary-os/os-patches&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/daily&#xA;sudo add-apt-repository ppa:elementary-os/os-patches&#xA;sudo apt install elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now everything works fine.&lt;/p&gt;&#xA;" OwnerUserId="19611" LastActivityDate="2019-12-12T14:24:46.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21580" PostTypeId="1" CreationDate="2019-12-12T15:55:55.673" Score="2" ViewCount="164" Body="&lt;p&gt;Things are really messy now with Catalina... the many disks and divisions Apple made in the disk are quite confusing. Anyhow, I want to dual-boot elementary OS but I haven't been able to partition the disk in the terminal - all the info I was able to find was outdated and didn't portray the actual steps needed with Catalina. There is the option to do it in Disk Utility also, but there it shows the options of format: APFS, Mac OS Extended, MS-DOS, and ExFAT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which one should I choose? Or does anyone know how to do it in the terminal directly with &lt;code&gt;$ diskutility&lt;/code&gt; ? My problem in the terminal lies in determining the disk, its name and which one to use. I have tried the huge UUID and also the path, e.g. /dev/disk1 - and neither one has worked. It says:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;does not appear to be a valid Core Storage Logical Volume UUID or disk&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help, it's been almost a week that I'm being knocked out by this lol&lt;/p&gt;&#xA;" OwnerUserId="19823" LastActivityDate="2019-12-12T15:55:55.673" Title="Dual-Boot with Mac OS Catalina - Outdated Info on Installation and Disk Partition" Tags="|dual-boot|macbook|disk-management|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21581" PostTypeId="2" ParentId="21567" CreationDate="2019-12-12T20:41:12.670" Score="0" Body="&lt;p&gt;I used the instructions here to get mine working &lt;a href=&quot;https://blog.sleeplessbeastie.eu/2017/09/25/how-to-mount-webdav-share-using-systemd/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to mount WebDAV share using systemd&lt;/a&gt;. It's important to pay attention to the names of the .mount and .automount services you'll have to create, which MUST correspond to the paths of the mountpoint folders. For example: creating a mount-my-webdav.mount unit will try to mount your WebDAV share to /mount/my/webdav... it will create the folder if it does not exist :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Although it is not obligatory for this to work, you'll also have to create a new fstab entry if you want for the mounted folder to appear in the Devices section of Pantheon Files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will add below the steps I took, and the contents of my files, just as a guide:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a mountpoint folder:&lt;br&gt;&#xA;&lt;code&gt;sudo mkdir /media/vlad/Digi&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the davfs package:&lt;br&gt;&#xA;&lt;code&gt;sudo apt get install davfs2&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add your WebDAV server configuration to the davfs secrets file:&lt;br&gt;&#xA;&lt;code&gt;sudo nano /etc/davfs2/secrets&lt;/code&gt; and paste at the end a line something like this:&lt;br&gt;&#xA;&lt;code&gt;&quot;https://webdav.server/share/path&quot; webdav_user &quot;webdav_password&quot;&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a new .mount service, with the name of the service reflecting the mount folder path from 1:&lt;br&gt;&#xA;&lt;code&gt;sudo nano /etc/systemd/system/media-vlad-Digi.mount&lt;/code&gt; with the following contents:  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&#xA;[Unit]  &#xA;Description=Mount personal WebDAV  &#xA;After=network-online.target  &#xA;Wants=network-online.target  &#xA;&#xA;[Mount]  &#xA;What=&quot;https://webdav.server/share/path&quot;  &#xA;Where=/media/vlad/Digi  &#xA;Options=noauto,user,uid=vlad,gid=vlad  &#xA;Type=davfs  &#xA;TimeoutSec=60  &#xA;&#xA;[Install]  &#xA;WantedBy=remote-fs.target&#xA;&lt;/pre&gt;  &#xA;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Create a new .automount service:&lt;br&gt;&#xA;&lt;code&gt;sudo nano /etc/systemd/system/media-vlad-Digi.automount&lt;/code&gt; containing:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&#xA;[Unit]&#xA;Description=Automount personal WebDAV&#xA;After=network-online.target&#xA;Wants=network-online.target&#xA;&#xA;[Automount]&#xA;Where=/media/vlad/Digi&#xA;TimeoutIdleSec=300&#xA;&#xA;[Install]&#xA;WantedBy=remote-fs.target&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Reload systemd manager configuration:&lt;br&gt;&#xA;&lt;code&gt;sudo systemctl daemon-reload&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enable the services:&lt;br&gt;&#xA;&lt;code&gt;sudo systemctl enable media-vlad-Digi.mount&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo systemctl enable media-vlad-Digi.automount&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create e fstab entry for your new mount folder:&#xA;&lt;code&gt;sudo nano /etc/fstab&lt;/code&gt; and add a new line like this one:&lt;br&gt;&#xA;&lt;code&gt;https://webdav.server:443/share/path /media/vlad/Digi davfs user,noauto 0 0&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Verify it all works well:&lt;br&gt;&#xA;&lt;code&gt;sudo systemctl start media-vlad-Digi.automount&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo systemctl status media-vlad-Digi.mount&lt;/code&gt;  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&#xA;● media-vlad-Digi.mount - Mount personal WebDAV&#xA;   Loaded: loaded (/etc/systemd/system/media-vlad-Digi.mount; enabled; vendor preset: enabled)&#xA;   Active: active (mounted) since Thu 2019-12-12 22:04:08 EET; 18min ago&#xA;    Where: /media/vlad/Digi&#xA;     What: https://webdav.server:443/share/path&#xA;  Process: 3532 ExecUnmount=/bin/umount /media/vlad/Digi -c (code=exited, status=0/SUCCESS)&#xA;  Process: 3865 ExecMount=/bin/mount &quot;https://webdav.server:443/share/path&quot; /media/vlad/Digi -t davfs -o user,uid=vlad,gid=vlad &#xA;    Tasks: 1 (limit: 4915)&#xA;   CGroup: /system.slice/media-vlad-Digi.mount&#xA;           └─3867 /sbin/mount.davfs &quot;https://webdav.server:443/share/path&quot; /media/vlad/Digi -o rw noexec nosuid nodev uid=1000 g&#xA;&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;10&quot;&gt;&#xA;&lt;li&gt;Reboot &amp;amp; Enjoy!&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;IMPORTANT&lt;/strong&gt;:  &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;In the commands above replace &lt;code&gt;vlad&lt;/code&gt; with you user name, obviously, and &lt;code&gt;https://webdav.server:443/share/path&lt;/code&gt; with your WebDAV server's domain and path  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If, after reboot you find yourself staring at a black screen, with some white text, it means the fstab entry contains some errors. Press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;D&lt;/kbd&gt; followed by &lt;code&gt;nano /etc/fstab&lt;/code&gt;. Comment the line you added at step 8 by placing a &lt;code&gt;#&lt;/code&gt; at it's beginning and reboot.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When using the nano editor, use &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;O&lt;/kbd&gt; to save the file, and &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt; to exit nano.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You must run &lt;code&gt;sudo systemctl daemon-reload&lt;/code&gt; after editing the .mount and .automount files.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Depending on the speed of your network adapters, you might sometimes find that your WebDAV share appears twice in Files, under Devices. If it bothers you too much, comment the entry you added in fstab.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-12T20:52:48.780" LastActivityDate="2019-12-12T20:52:48.780" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21583" PostTypeId="2" ParentId="21501" CreationDate="2019-12-12T21:21:24.343" Score="0" Body="&lt;p&gt;I find a solution of my daily usage for Caldav, I hope they work with web calendar... (But if you see in calendar there is not &quot;web calendar&quot; but just &quot;Caldav&quot;...)&#xA;I add Caldav first in calendar, then,I change Caldav properties in evolution to save Caldav identifiers in calendar and evolution (in order to add event in evolution or calendar). I go to evolution and change the calendar update in calendar propreties. Chose the shortest time (1 minute). The cool thing is that can work even when evolution is not launch (at start-up for example). For example when i add an event in calendar, the event is visible quickly in calendar according to the update cycle of one minute. Actually, when the set up is complete, I never use evolution except to manage online contact.&#xA;In addition, I think there is a conflict between evolution and calendar for certain events. Clear problematic events (directly in your online service), restart your computer and re-record events with calendar.&#xA;I hope that calendar can be autonomous in the futur with evolution data-server or something like that.&lt;/p&gt;&#xA;" OwnerUserId="19826" LastActivityDate="2019-12-12T21:21:24.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21584" PostTypeId="2" ParentId="16564" CreationDate="2019-12-12T21:48:43.483" Score="1" Body="&lt;p&gt;When you first install mysql server and the installation does not ask for root password, it takes &lt;code&gt;auth_socket&lt;/code&gt; as default plugin for mysql root user, which does not allow root connections without sudo.&#xA;You can test this if you run &lt;code&gt;mysql -u root&lt;/code&gt;&lt;em&gt;(ERROR 1698: Access denied for user 'root'@'localhost')&lt;/em&gt; and &lt;code&gt;sudo mysql -u root&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are two solutions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Change default plugin for root user&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;It is already explained &lt;a href=&quot;https://stackoverflow.com/questions/39281594/error-1698-28000-access-denied-for-user-rootlocalhost&quot;&gt;here&lt;/a&gt;.&lt;/em&gt; The mentioned error will appear in other programs that can use mysql root user too, therefore this is a all-in-one way to solve it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Create a new user with root privileges&lt;/strong&gt; &lt;em&gt;(It is not recommended that you use mysql root user for common usage, so i recommend this option)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter into mysql with sudo (no password needed)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql -u root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Create a new user (replace &lt;em&gt;phpmyadmin_user&lt;/em&gt; and &lt;em&gt;password&lt;/em&gt; with yours)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mysql&amp;gt; CREATE USER 'phpmyadmin_user'@'localhost' IDENTIFIED BY 'password';&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Grant root privileges to the new user (You can also specify what databases and tables you're granting privileges to with &lt;em&gt;databases.tables&lt;/em&gt;, * is a comodin)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mysql&amp;gt; GRANT ALL PRIVILEGES ON *.* TO 'phpmyadmin_user'@'localhost';&#xA;mysql&amp;gt; FLUSH PRIVILEGES;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now you should be able to login into phpmyadmin with the new user/password.&lt;/p&gt;&#xA;" OwnerUserId="19236" LastEditorUserId="19236" LastEditDate="2019-12-13T13:01:45.637" LastActivityDate="2019-12-13T13:01:45.637" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="21586" PostTypeId="1" CreationDate="2019-12-13T00:52:16.897" Score="1" ViewCount="393" Body="&lt;p&gt;Fairly straight forward question, what open source, non cloud based programs  are recommended to use with Elementary OS?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Youtube in the next several months is going to remove a vast amount of content and I don't see this content being archived by most people. This is a race against time.  &lt;/p&gt;&#xA;" OwnerUserId="19827" LastActivityDate="2022-03-20T21:46:27.693" Title="What program to use to download videos with Elementary OS" Tags="|videos|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21587" PostTypeId="1" CreationDate="2019-12-13T02:46:39.017" Score="0" ViewCount="100" Body="&lt;p&gt;I am completely new to the Linux world, and have built my first computer. I have used Macs and Windows for many years, but decided to try Elementary OS. I don't have a huge technical background in IT.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to connect my computer to my &lt;strong&gt;Xfinity router/modem&lt;/strong&gt; with an ethernet cable. My computer says it is connected, but every website fails to load. I have just upgraded to 5.1 Hera, and my system is a &lt;strong&gt;&lt;em&gt;ASRock X399 Phantom 6 MB with a Risen 2950 threadripper CPU&lt;/em&gt;&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone can give me any guidance or suggestions, it would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Joe&lt;/p&gt;&#xA;" OwnerUserId="19499" LastEditorUserId="19360" LastEditDate="2019-12-13T18:31:45.467" LastActivityDate="2023-12-23T10:01:35.170" Title="Connecting to DSL Modem with Ethernet cable" Tags="|internet|release-hera|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21588" PostTypeId="2" ParentId="21533" CreationDate="2019-12-13T03:35:43.393" Score="0" Body="&lt;p&gt;So I thought about Jeremy's comment on wrong versions of dependencies, so I used the Synaptic software manager to reinstall libpoppler85, and that rectified the versions.  I was able to simply download Files from the appstore after that.&lt;/p&gt;&#xA;" OwnerUserId="19791" LastActivityDate="2019-12-13T03:35:43.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21590" PostTypeId="1" AcceptedAnswerId="21688" CreationDate="2019-12-13T07:35:51.380" Score="1" ViewCount="85" Body="&lt;p&gt;My system has been freezing and I have to restart the PC pressing the power button and turn in it off, I think that is a fatal crash, I'm using mostly Google Chrome when this happen but I have tried some steps that I found here &lt;a href=&quot;https://askubuntu.com/questions/1054738/ubuntu-18-04-freezes-while-im-using-chrome&quot;&gt;https://askubuntu.com/questions/1054738/ubuntu-18-04-freezes-while-im-using-chrome&lt;/a&gt; but it didn't work... Any idea? &lt;/p&gt;&#xA;" OwnerUserId="19775" LastEditorUserId="19775" LastEditDate="2019-12-18T08:16:21.673" LastActivityDate="2019-12-18T10:05:57.710" Title="Is there any way to see what is causing the system to freeze?" Tags="|crash|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21591" PostTypeId="1" CreationDate="2019-12-13T10:39:14.243" Score="0" ViewCount="513" Body="&lt;p&gt;I have two 1 TB hard disk and I am planning to install elementary OS 15.1 on my system. I am planning to keep both hard disks on software RAID1.&#xA;I am planning to keep a separate partition for &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;/&lt;/li&gt;&#xA;  &lt;li&gt;/boot&lt;/li&gt;&#xA;  &lt;li&gt;/home&lt;/li&gt;&#xA;  &lt;li&gt;swap&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;When I tried on my VMWare setup, I can install an elementary OS, when I am not creating separate above partitions.&#xA;When I tried splitting into multiple partitions, the installation gets stuck in grub installation failure and shows multiple options to proceed.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Selection of different partition where grub will be installed. &lt;/li&gt;&#xA;&lt;li&gt;Install bootloader later.     &lt;/li&gt;&#xA;&lt;li&gt;Cancel installation.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I am not able to select any options, the &quot;okay&quot; button is not responding.&#xA;Is there any guide on how this can be resolved?&lt;/p&gt;&#xA;" OwnerUserId="15179" LastEditorUserId="19360" LastEditDate="2019-12-14T16:48:43.670" LastActivityDate="2023-12-24T15:04:55.593" Title="How to install elementary OS 5.1 on RAID disk?" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21594" PostTypeId="2" ParentId="16564" CreationDate="2019-12-13T13:06:02.403" Score="0" Body="&lt;p&gt;The way I use the mysql server on my local computers is by mysql_native_password authentification method. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;0. Preparation.&lt;/strong&gt; If you have any errors and &lt;strong&gt;no databases to keep&lt;/strong&gt; I recommend starting clean. For this reason lets fisrt remove all packages and databases with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge mysql*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you do not have the purge command, you can install it by &lt;code&gt;sudo apt install purge&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1. Install mysql server&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mysql-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2. Remove dangerous defaults and lock-downs of the database&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql_secure_installation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;2.1 VALIDATE PASSWORD PLUGIN. There are two options here, to make my life easier I use the &lt;strong&gt;No&lt;/strong&gt; option and always &lt;strong&gt;chose a strong password&lt;/strong&gt;. There is an option to use it with Yes, and configuration instructions if you follow the link I will provide later, but I never succeed to have phpMyAdmin running if I use Yes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.2 Remove anonymous users: In most cases you do not need them so I recommend &lt;strong&gt;Yes&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.3 Disallow login remotely: I use &lt;strong&gt;Yes&lt;/strong&gt;, because I do not want remote logins to my local database, but &lt;strong&gt;if you plan to do this via SSH&lt;/strong&gt; for example, you better choose &lt;em&gt;No&lt;/em&gt;. Otherwise, Yes is more safe and it always can be changed using the same secure instalation wizard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.4 Remove test database and access to it: &lt;strong&gt;Yes&lt;/strong&gt;. Unless you need it for some reason you better remove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2.5 Reload privilage tables now: &lt;strong&gt;Yes&lt;/strong&gt;, because you want the changes made already to be active.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3. Switch authentification method of root user from &lt;em&gt;auth_socket&lt;/em&gt; to &lt;em&gt;mysql_native_password&lt;/em&gt;&lt;/strong&gt;. This is necessary if you wish to not using the sudo command every time you login into mysql database, also to use native phpAdminLogin with the same root password. First you need to login into mysql using the auth_socket:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Because you will login into mysql command line interface, the shell prompt will be &lt;code&gt;mysql&amp;gt;&lt;/code&gt;. Make sure to replace the string &lt;strong&gt;your_root_password&lt;/strong&gt; below with the password you want to use for the mysql root account, but &lt;strong&gt;put it in inside the ' '&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ALTER USER 'root'@'localhost' IDENTIFIED WITH mysql_native_password BY 'your_root_password';&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use the next command to flush the privileges:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;FLUSH PRIVILEGES;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In order to leave the mysql command interface and go back to bash console execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From now on you will be able to login using &lt;code&gt;mysql -u root -p&lt;/code&gt; but if you try &lt;code&gt;sudo mysql -u root -p&lt;/code&gt; you will have an error because the authentification method is changed from &lt;strong&gt;auth_socket&lt;/strong&gt; to &lt;strong&gt;mysql_native_password&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;On the next link you can see a complete guide how to install LAMP on ubuntu 18.04, with more detailed explanation of the mysql part, including options if you choose VALIDATE PASSWORD PLUGIN to be Yes. I do not say it is wrong to be done this way, but I never succeeded to make it work using the password validation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mysql-php-lamp-stack-ubuntu-18-04#step-2-%E2%80%94-installing-mysql&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mysql-php-lamp-stack-ubuntu-18-04#step-2-%E2%80%94-installing-mysql&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This &lt;strong&gt;complete&lt;/strong&gt; guide above I use every time when I face any problems during installing LAMP on Ubuntu 16.04 and 18.04 based operation systems. The version on the link is for ubuntu 18.04, but it actually is an updated version for the ubuntu 16.04 from the same website I have used with Loki and Ubuntu 16.04. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-13T13:13:30.553" LastActivityDate="2019-12-13T13:13:30.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21595" PostTypeId="2" ParentId="21586" CreationDate="2019-12-13T15:07:59.330" Score="0" Body="&lt;p&gt;The best solution for downloading videos (including YouTube) I have until now is &lt;strong&gt;Copy Paste Grab&lt;/strong&gt;. You can find it into AppCenter in category Internet.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-13T15:07:59.330" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21596" PostTypeId="2" ParentId="21587" CreationDate="2019-12-13T15:08:47.323" Score="0" Body="&lt;p&gt;Welcome in the elementary OS community.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your &lt;strong&gt;Xfinity router/modem&lt;/strong&gt;, I invite you to check if it is DHCP, you can do this in the control panel of your hardware.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you need the user manual, I think this link will help you &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.xfinity.com/support/articles/usermanuals&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.xfinity.com/support/articles/usermanuals&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For your motherboard apparently you have this network card : &lt;strong&gt;Phantom Gaming 2.5G LAN, Intel® Gigabit LAN&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For information, on elementary OS there is no change of the network icon when connected in ETHERNET, as on Windows.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After verifying that your router is in DHCP I invite you to do this on the command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# check if your ethernet has an ip&#xA;$ ip add&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if that's ok, try to see if you ping a website&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ ping elementaryos.stackexchange.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for now I can only give you this as the beginning of answer&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-13T15:08:47.323" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21597" PostTypeId="1" AcceptedAnswerId="21605" CreationDate="2019-12-13T17:08:47.163" Score="1" ViewCount="171" Body="&lt;p&gt;I read what the creators of Elementary OS said about flatpack and PPA.&lt;/p&gt;&#xA;&lt;p&gt;And I agreed - PPA is not so secure.&lt;/p&gt;&#xA;&lt;p&gt;But if I install, say Krita, from flatpak, I will have the latest version, BUT will I receive updates? Or will I have to do it manually?&lt;/p&gt;&#xA;&lt;p&gt;Because installing PPA is maybe less secure but convenient IF flatpak cannot be updated by itself.&lt;/p&gt;&#xA;" OwnerUserId="19817" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:21.560" LastActivityDate="2023-11-18T18:40:21.560" Title="Do flatpak programs provide auto-updates?" Tags="|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21599" PostTypeId="1" CreationDate="2019-12-13T20:23:17.280" Score="1" ViewCount="37" Body="&lt;p&gt;I am a designer i work on graphics, animation, ui/ux designs, web design and video editing, i have to use Adobe family (Photoshop. illustrator, premier pro, after effects and more other adobe software) and some other software, like Sketch, invision etc, which are related to my work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What i need to know is that, kindly tell me that does your operating system is compatible for these software of not ? if yes then let me know how can i get the OS, and how can i get the software for this OS, and what will be the compete process?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking forward for your kind response.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="19837" LastActivityDate="2019-12-14T02:50:57.563" Title="Need Information" Tags="|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21601" PostTypeId="1" CreationDate="2019-12-13T21:27:39.863" Score="0" ViewCount="398" Body="&lt;p&gt;I really tried to like the Mail program that ships with the OS - ran it for ~4 months.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Thunderbird last week.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I disable pantheon-mail from starting on first login? I thought it might be the notifications settings for mail but they are turned off and I still get pantheon-mail appearing in the dock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thunderbird is set to the default mail app in settings -&gt; apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did I miss another setting or do I have to resort to running 'killall pantheon-mail' as a login start script?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[problem migrated from Juno to Hera if it matters]&lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2023-12-23T13:08:11.027" Title="Disabling Pantheon Mail" Tags="|pantheon-mail|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21602" PostTypeId="2" ParentId="21601" CreationDate="2019-12-13T21:32:23.093" Score="0" Body="&lt;p&gt;Did you try to uninstall it completely via app center?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm also on the way to either ditch the mail program and return to Thunderbird or to leave it as is... I've been a Thunderbird user for so many years, so this is kind of refreshing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sadly, I cannot say the same for their music Noise app that is just slow, unstable tra$h at the moment.&lt;/p&gt;&#xA;" OwnerUserId="19817" LastActivityDate="2019-12-13T21:32:23.093" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21603" PostTypeId="1" CreationDate="2019-12-13T23:00:36.883" Score="0" ViewCount="270" Body="&lt;p&gt;I'm a novice Elementary OS user - to the point where this is my first installation...ever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had a spare Windows 10 Acer laptop and decided to do a fresh install of Elementary OS on it, so this is a clean installation where the username and password was created during installation. I have now tried reinstalling the OS multiple times and seem to be stuck in the same loop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens is when the install is completed and the laptop restarts, Im greeted with a login screen. When I enter the password, the screen goes black for a second, and I'm back to the login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can't seem to do anything - stuck in a loop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have any advice?&lt;/p&gt;&#xA;" OwnerUserId="19838" LastActivityDate="2019-12-14T06:12:08.970" Title="Login Loop on fresh install" Tags="|greeter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21604" PostTypeId="2" ParentId="21603" CreationDate="2019-12-13T23:46:18.007" Score="1" Body="&lt;p&gt;Sometimes you can get additional information about various failures if you press [Ctrl] + [Alt] + [F1] (F1 - F6). This takes you to a new &quot;tty&quot; or terminal. You may be asked to log in, so type in your username and password here. If you get to log in successfully then you can run &lt;code&gt;dmesg&lt;/code&gt; to print out a bunch of debug info and see if maybe a driver crashed.&lt;/p&gt;&#xA;" OwnerUserId="19839" LastEditorUserId="19236" LastEditDate="2019-12-14T06:12:08.970" LastActivityDate="2019-12-14T06:12:08.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21605" PostTypeId="2" ParentId="21597" CreationDate="2019-12-13T23:48:20.717" Score="2" Body="&lt;p&gt;Yes! I was prompted and installed a few updates for a few of my flatpak apps. In fact, I updated Visual Studio Code after being prompted this morning.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-13T23:48:20.717" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21606" PostTypeId="2" ParentId="21599" CreationDate="2019-12-14T02:05:54.653" Score="1" Body="&lt;p&gt;Adobe family softwares does not work in linux by itself, but you can try installing it with emulators.&#xA;There are a few emulators for windows softwares such as Wine or CrossOver, that will allow you to install almost any window's software in linux (sometimes this has errors and lower performance, and in my own experience this option is way harder to do in ElementaryOS than in other linux distro).&#xA;Sadly this is the only way i know to make Windows software to work in Linux, otherwise you could try having ElementaryOS and Windows both installed in your computer&lt;/p&gt;&#xA;" OwnerUserId="19236" LastActivityDate="2019-12-14T02:05:54.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21607" PostTypeId="1" AcceptedAnswerId="22572" CreationDate="2019-12-14T02:08:53.347" Score="0" ViewCount="172" Body="&lt;p&gt;Full screen mode works fine in any other app, but in Chrome the tabs are not being displayed in the new Hera update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt; I realized that is also happening in other apps like the AppCenter, where the header bar is missing in full screen mode.&lt;/p&gt;&#xA;" OwnerUserId="19841" LastEditorUserId="19360" LastEditDate="2019-12-15T03:10:54.157" LastActivityDate="2020-02-27T14:18:08.473" Title="tabs not showing in full screen mode in hera when using chrome" Tags="|google-chrome|release-hera|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21608" PostTypeId="2" ParentId="21601" CreationDate="2019-12-14T02:10:13.930" Score="0" Body="&lt;p&gt;System settings &gt; Applications &gt; Startup . Click on the mail icon and then the &quot;-&quot; (minus) below to remove it from the list. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-14T02:10:13.930" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21609" PostTypeId="2" ParentId="21599" CreationDate="2019-12-14T02:50:57.563" Score="0" Body="&lt;p&gt;The only option I found Adobe programs to work good into linux (including elementary os) is by running a virtual mashine with windows/macos which is ok if you have a really powerfull computer. Emulator versions like wine are really good for games, but with Adobe software they do not work well, also there are not so many versions that can run anyhow, but even if they did.. some functionalities are broken or missing. If I need to use Adobe programs, I use them on virtual mashines when the tasks are not so big and I need to provide some psd or ai file for example. But my computer is with Quad-Core Intel® Core™ i7-7700HQ CPU and 24GB of RAM, NVMe SSD and it is ok. If I run them on Windows, even on Hackintosh, the productivity will be much much better compared to the virtual mashine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some linux alternatives. For video cut good linux option is kdenLive - this summer I produced a few hundred 2minutes videos of tandem flights, with template and branding of the paragliding club but I prefer the linux program then Premiere because actually I never did like Premiere. But if I have to compare kdenLive with Final Cut Pro.. mac application wins for sure! For vector graphics usually I use Inkscape, it's kind of difficult to achieve what I can do with Illustrator no matter that there are tools and functions which Illustrator misses and Gimp is my replacement of Photoshop with almost no downsides. But if you have a lot of experience with Adobe products - you will not gonna like the linux alternatives for sure because they work differently to what you have habits already, you will need to watch a lot of tutorial videos (there are soo many for free but it takes time) so if you plan to keep using the Adobe programs, I think that Linux (including elementary OS) is not good for you. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-14T02:50:57.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21610" PostTypeId="2" ParentId="21607" CreationDate="2019-12-14T03:15:22.093" Score="1" Body="&lt;p&gt;There are two options to go into fullscreen mode.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;1) Gnome keyboard shortcut&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;If you use &lt;kbd&gt;F11&lt;/kbd&gt; you go into fullscreen mode without tabs with almost any app.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;2) Custom (elementary OS) shortcut for Toggle Fullscreen&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;The other option has tabs, but in order to achieve it you have to configure a shortcut via&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;System Settings &gt; Keyboard &gt; Shortcuts &gt; Windows &gt; Toggle Fullscreen mode&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C0k4C.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C0k4C.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click with the mouse over Disabled (if you have not configured one already) and choose a keyboard shortcut.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I use &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;f&lt;/kbd&gt; because it is more intuitive for me to be like this but to achieve this you have to loose the Picture in picture mode, something usefull, which I almost never use, but of course you can choose any key combination you want.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-14T18:15:31.433" LastActivityDate="2019-12-14T18:15:31.433" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21611" PostTypeId="2" ParentId="21607" CreationDate="2019-12-14T04:49:35.113" Score="0" Body="&lt;p&gt;It's not supposed to. Fullscreen in Chrome is supposed to mask tabs and top bar until the cursor is moved to the top of the screen, and the fact that it didn't before is a bug in and of itself.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2019-12-14T04:49:35.113" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21613" PostTypeId="2" ParentId="21591" CreationDate="2019-12-14T07:17:11.510" Score="0" Body="&lt;p&gt;Unless you have a hardware RAID controller, &lt;strong&gt;you will need to use a software RAID controller/volume manager&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Typically, &lt;code&gt;mdadm&lt;/code&gt; is used to create &lt;code&gt;mdX&lt;/code&gt; devices which can be overlaid with your filesystem of choice. For UEFI, you will need a &lt;code&gt;/boot/efi&lt;/code&gt; partition as usual, as well as a &lt;code&gt;/boot&lt;/code&gt; partition of type Ext4 to provide the physical partition for which the mdX device containing your RAID volume will be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can currently apply similar methods &lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-create-raid-arrays-with-mdadm-on-ubuntu-16-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;mentioned here&lt;/a&gt; for your installation of elementary OS. Once your &lt;code&gt;mdX&lt;/code&gt; devices are created, start/probe them from the elementary OS live session and then select those as your root point.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastEditorUserId="19360" LastEditDate="2019-12-15T03:11:44.653" LastActivityDate="2019-12-15T03:11:44.653" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21614" PostTypeId="1" CreationDate="2019-12-14T08:04:38.137" Score="1" ViewCount="90" Body="&lt;h1&gt;System Specs&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;System:&#xA;Host: elementary-2950x&#xA;Kernel: 5.0.0-37-generic x86_64 bits: 64&#xA;Desktop: Gnome Distro: elementary OS 5.1 Hera&#xA;Machine:   Device: desktop&#xA;System: PC Specialist&#xA;  product: Amd X399 Overclocked serial: N/A&#xA;Mobo: ASUSTeK&#xA;model: PRIME X399-A v: Rev 1.xx&#xA;serial: N/A&#xA;UEFI: American Megatrends&#xA;  v: 1203&#xA;  date: 10/09/2019 Battery&#xA;  hidpp__0: charge: N/A condition: NA/NA Wh&#xA;CPU: 16 core AMD Ryzen Threadripper 2950X (-MCP-)&#xA;  cache: 4096 KB&#xA;Graphics:  Card: NVIDIA Device 1e04 (RTX2080Ti) Display Server: x11 (X.Org 1.20.4 )&#xA;  driver: nvidia&#xA;  Resolution: 3840x2160@60.00hz, 3840x2160@60.00hz, 3440x1440@59.94hz&#xA;OpenGL:&#xA;  renderer: GeForce RTX 2080 Ti/PCIe/SSE2&#xA;  version: 4.6.0 NVIDIA 435.21&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OfTG1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OfTG1.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is an image of the Display Manager and you can clearly see 1440 chosen and yet the display does not change to 1440.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you need any further config info.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nvidia-settings had been previously set to all three monitors in 1440 and xorg.conf saved on /etc/X11&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the monitors change back to native resolutions on every reboot of the system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind Regards Zeb...&lt;/p&gt;&#xA;" OwnerUserId="15399" LastEditorUserId="19360" LastEditDate="2019-12-14T16:49:01.090" LastActivityDate="2023-12-24T09:08:46.047" Title="Displays failing to set a resolution on a triple monitor setup" Tags="|display|nvidia|resolution|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21615" PostTypeId="1" CreationDate="2019-12-14T12:02:03.257" Score="2" ViewCount="2129" Body="&lt;p&gt;Just got my new Dell XPS 13 (7930) developer edition with Ubuntu 18.04 preinstalled, and want to install Elementary OS 5.1. I flashed the OS onto a USB, booted into the USB and I get the following error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;This Dell REcovery Media can be used to restore the original factory software. &#xA;It is recommended you back up all important data before running this tool.&#xA;&#xA;ERROR: This recovery media only functions on Dell and Alienware &#xA;systems purchased with Ubuntu.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So somehow it launches a Dell recovery program. I made sure the correct USB stick is selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What might cause this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have checked/tried so far:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The SATA mode in BIOS options is set to AHCI&lt;/li&gt;&#xA;&lt;li&gt;Create live USB using mulitple methods/computers/operating systems&lt;/li&gt;&#xA;&lt;li&gt;Confirmed the live USB works fine by trying to install it to my old XPS 13 9343 - no issues there&lt;/li&gt;&#xA;&lt;li&gt;Tried the &lt;code&gt;nomodeset&lt;/code&gt; option from e.g. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10000/elementary-os-wont-boot-past-live-cd-screen&quot;&gt;elementary OS won&amp;#39;t boot past live CD screen&lt;/a&gt; - this resulted in a black screen&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/og1T9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/og1T9.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19846" LastEditorUserId="19846" LastEditDate="2019-12-14T17:21:24.167" LastActivityDate="2024-01-08T08:07:10.847" Title="How to install on Dell XPS 13 (7390) developer edition" Tags="|system-installation|boot|dell|" AnswerCount="3" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="21618" PostTypeId="2" ParentId="21615" CreationDate="2019-12-14T12:42:48.697" Score="0" Body="&lt;p&gt;I think that either your bootable USB key was not well done or you did not activate the AHCI mode of your DELL, but I think that it is already configured low on the Dell Developper edition&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe this links can help you&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://medium.com/@peterpang_84917/personal-experience-of-installing-ubuntu-18-04-lts-on-xps-15-9570-3e53b6cfeefe&quot; rel=&quot;nofollow noreferrer&quot;&gt;Personal experience of installing Ubuntu 18.04 LTS on XPS 15 9570&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dell.com/community/XPS/XPS-13-7390-2-n-1-Cannot-Boot-Fedora-30-Live-USB/td-p/7385971&quot; rel=&quot;nofollow noreferrer&quot;&gt;XPS 13-7390 2 n 1 Cannot Boot Fedora 30 Live USB&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dell.com/support/article/fr/fr/frbsdt1/sln151664/how-to-install-ubuntu-linux-on-your-dell-pc?lang=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to Install Ubuntu Linux on your Dell PC&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On my two XPS 13 I just had to activate the AHCI mode, and on one to deactivate Bitlocker before, but that should not be your case. By quickly reading some of the links above it would seem that for your model you will need to do some additional manipulations.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;Recommended action&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Update your BIOS&lt;/li&gt;&#xA;&lt;li&gt;Backup your Ubuntu if you need it&lt;/li&gt;&#xA;&lt;li&gt;Activate AHCI mode&lt;/li&gt;&#xA;&lt;li&gt;Create your USB live with this tutorial &lt;a href=&quot;https://elementary.io/en/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;If it doesn't work, look at the links above&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;hope it will help you and you can, like me, enjoy a super elementary OS on a DELL XPS&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-14T12:49:19.323" LastActivityDate="2019-12-14T12:49:19.323" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="21619" PostTypeId="2" ParentId="21329" CreationDate="2019-12-14T12:53:50.000" Score="0" Body="&lt;p&gt;This information can be found, for each new version of elementary OS on this link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/en/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/docs/installation#recommended-system-specifications&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;For version elementary OS 5.1&lt;/strong&gt; (subject of this conversation) you can check the ISO with this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sha256sum elementaryos-5.1-stable.20191202.iso&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the checksum for elementary OS 5.1 2019 12 02 should be&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cd66c32d53eab6f789b8e69e499305b7af0c9b3083ed54d50b111136d2795ea1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-14T13:12:52.607" LastActivityDate="2019-12-14T13:12:52.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21620" PostTypeId="1" CreationDate="2019-12-14T12:55:29.067" Score="1" ViewCount="463" Body="&lt;p&gt;I am new to linux and decided to check out elementary OS,I carried out a dual boot by shrinking my hard drive,deleted one of my recovery partition(100mb) and creating an extended partition where I installed elementary OS. while installing I chose the manual created a swap partition an an ext4 partition.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After the installation, I was able to boot elementary OS, but when I try to boot windows 10 from grub, I get a black screen and then it goes back to grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i have tried updating grub, and some other fixes i saw here but none has worked so far. i tired boot repair and got this  &lt;a href=&quot;http://paste.ubuntu.com/p/CsGGzVsPnn/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/p/CsGGzVsPnn/&lt;/a&gt;  . i rally need help with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS  i tried installing a new version of windows but it keeps crashing. before i get to the install page &lt;/p&gt;&#xA;" OwnerUserId="19847" LastEditorUserId="16827" LastEditDate="2019-12-17T15:50:34.330" LastActivityDate="2024-01-26T11:04:45.593" Title="cant boot into windows after dual booting elementary OS hera" Tags="|dual-boot|microsoft-windows|release-hera|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21621" PostTypeId="2" ParentId="16276" CreationDate="2019-12-14T13:46:08.767" Score="0" Body="&lt;p&gt;This is still an old question but that's why there was a different version between the &lt;strong&gt;AppCenter&lt;/strong&gt; and the official repository.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is possible to install an application, without touching the &lt;code&gt;Source.list&lt;/code&gt; via the well-known command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install &amp;lt;package-name&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But elementary OS is based on Ubuntu and therefore also follows the packages for the Ubuntu distribution on which it is based. If a version of Ubuntu does not support or validate a version of a package, then you will not have the latest version of the package via the classic method above&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can install a package in this most recent version generally by following the tutorial from the official website&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the time of this writing, in &lt;strong&gt;December 2019&lt;/strong&gt;, VideoLAN recommends using &lt;code&gt;Snap&lt;/code&gt; to install the latest stable package for Ubuntu OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Informations &lt;a href=&quot;https://www.videolan.org/vlc/download-ubuntu.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if today (2019) we want the very latest version of VLC through the official repository, we must do these commands&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Install snap&#xA;# add the arg -y for auto answer Yes (confirm action)&#xA;$ sudo apt install snap -y&#xA;&#xA;# Install VLC via snap&#xA;$ sudo snap install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-14T13:46:08.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21622" PostTypeId="2" ParentId="16562" CreationDate="2019-12-14T15:42:45.087" Score="0" Body="&lt;h1&gt;First question&lt;/h1&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;When I watch videos on Google chrome eg. Youtube or Twitch the video&#xA;  often pauses while the sound continues before starting again when I&#xA;  change from full-screen&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Sometimes you will have to deactivate &lt;strong&gt;H/W Acceleration&lt;/strong&gt; on your browser.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Google chrome you can check if enable or disable with this link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://chrome://gpu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;chrome://gpu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in the first section you will find a result like this, which may be different&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZOXhz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZOXhz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;got to &lt;a href=&quot;http://chrome://settings/&quot; rel=&quot;nofollow noreferrer&quot;&gt;chrome://settings/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;At the bottom of the page go to advanced&lt;/li&gt;&#xA;&lt;li&gt;In the system section disable the option&lt;/li&gt;&#xA;&lt;li&gt;relaunch the browser&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DbY4X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DbY4X.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In one of my jobs, for our application we had to deactivate this function, because it had problem with the fluidity in our application&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Second question&lt;/h1&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I have found that with any theme that is not the default wingpanel&#xA;  will not turn black when windows are maximized. I tried the&#xA;  instructions at the below link but the problem wasn't resolved.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The themes (if I'm not mistaken) are written in CSS, some elementary OS parameters may not take over the CSS of the theme. For example, currently I have a theme which does not make the bar completely transparent when I do not maximize a window.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I think the theme chooses takes control of the elementary OS setting&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-14T15:42:45.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21623" PostTypeId="1" CreationDate="2019-12-14T16:03:31.040" Score="1" ViewCount="247" Body="&lt;p&gt;When playing media in Firefox, for example on Youtube.com it would be great if we could control this using our build in audio indicator or the audio keyboard shortcuts. But it looks like Firefox isn't detected as a audio playing source. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other applications like Spotify or Auryo are detected and controllable. Chromium is detected and controllable, although the artwork (icon) isn't updated. &lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2019-12-14T16:26:29.323" LastActivityDate="2019-12-15T12:12:59.610" Title="Can't control Firefox media through the sound indicator or keyboard shortcuts" Tags="|keyboard-shortcuts|sound|firefox|indicator-sound|multimedia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21624" PostTypeId="2" ParentId="21623" CreationDate="2019-12-14T16:10:03.473" Score="4" Body="&lt;p&gt;Firefox doesn't seem to be a MPRIS &quot;provider&quot;&#xA;Spec:&lt;br&gt;&#xA;&lt;a href=&quot;https://www.freedesktop.org/wiki/Specifications/mpris-spec/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.freedesktop.org/wiki/Specifications/mpris-spec/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Relevant Firefox bug:&lt;br&gt;&#xA;&lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1353652&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.mozilla.org/show_bug.cgi?id=1353652&lt;/a&gt;&lt;br&gt;&#xA;Seems people are currently implementing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some extra info: websites can share this info using the new Media Session API. Some resources:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://developer.mozilla.org/en-US/docs/Web/API/Media_Session_API&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.mozilla.org/en-US/docs/Web/API/Media_Session_API&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://developers.google.com/web/updates/2017/02/media-session&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developers.google.com/web/updates/2017/02/media-session&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Support: &lt;a href=&quot;https://caniuse.com/#search=Media%20Session%20API&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://caniuse.com/#search=Media%20Session%20API&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Online demo: &lt;a href=&quot;https://googlechrome.github.io/samples/media-session/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://googlechrome.github.io/samples/media-session/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2019-12-14T16:10:03.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21626" PostTypeId="1" CreationDate="2019-12-14T16:54:32.073" Score="1" ViewCount="616" Body="&lt;p&gt;When playing media from sites like youtube.com on Chromium (Chrome) it's shown in the sound indicator, you see thing like the title and you can control the playback. But the icon is always the fallback, general music icon. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/576xz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/576xz.png&quot; alt=&quot;Chromium in sound indicator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other applications like Spotify or Auryo are also detected and they do display the artwork of music that's playing.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/q6MNg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q6MNg.png&quot; alt=&quot;Spotify or Auryo in sound indicator&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Firefox doesn't currently show up at all, see: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21623/cant-control-firefox-media-through-the-sound-indicator-or-keyboard-shortcuts&quot;&gt;Can&amp;#39;t control Firefox media through the sound indicator or keyboard shortcuts&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2023-12-23T22:02:25.303" Title="No artwork shown for media played through Chromium" Tags="|google-chrome|indicator-sound|chromium|multimedia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21627" PostTypeId="2" ParentId="21626" CreationDate="2019-12-14T16:54:32.073" Score="0" Body="&lt;p&gt;This is where we try to extract the artwork:&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/blob/master/src/Widgets/MprisGui.vala#L523&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-sound/blob/master/src/Widgets/MprisGui.vala#L523&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried logging what's in that metadata using the following but I'm not seeing any artwork data.&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;        metadata.foreach ((key, val) =&amp;gt; {&#xA;            print (&quot;%s =&amp;gt; %s (%s)\n&quot;, key, val.print(true), val.get_type().dup_string ());&#xA;        });&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logged from &lt;a href=&quot;https://googlechrome.github.io/samples/media-session/audio.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://googlechrome.github.io/samples/media-session/audio.html&lt;/a&gt; :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Before starting playing&#xA;xesam:artist =&amp;gt; [''] (as)&#xA;xesam:album =&amp;gt; '' (s)&#xA;xesam:title =&amp;gt; '' (s)&#xA;mpris:trackid =&amp;gt; objectpath '/io/github/GnomeMpv/Track/0' (o)&#xA;mpris:length =&amp;gt; int64 0 (x)&#xA;xesam:url =&amp;gt; '' (s)&#xA;&#xA;# First song&#xA;xesam:artist =&amp;gt; ['Jan Morgenstern'] (as)&#xA;xesam:album =&amp;gt; 'Sintel' (s)&#xA;xesam:title =&amp;gt; 'Snow Fight' (s)&#xA;&#xA;# Second song&#xA;xesam:artist =&amp;gt; ['Jan Morgenstern'] (as)&#xA;xesam:album =&amp;gt; 'Big Buck Bunny' (s)&#xA;xesam:title =&amp;gt; 'Prelude' (s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Trying this with Spotify I get:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xesam:discNumber =&amp;gt; 1 (i)&#xA;xesam:url =&amp;gt; 'https://open.spotify.com/track/6f0sKFgjcesnolqU8Fz8kB' (s)&#xA;xesam:title =&amp;gt; 'Vengeance (The Return of the Night Driving Avenger) [Bonus Track]' (s)&#xA;xesam:trackNumber =&amp;gt; 6 (i)&#xA;mpris:artUrl =&amp;gt; 'https://open.spotify.com/image/ab67616d00001e02b8835366e419d606cd6ec015' (s)&#xA;xesam:autoRating =&amp;gt; 0.35999999999999999 (d)&#xA;mpris:trackid =&amp;gt; 'spotify:track:6f0sKFgjcesnolqU8Fz8kB' (s)&#xA;xesam:album =&amp;gt; 'Nocturne City' (s)&#xA;mpris:length =&amp;gt; uint64 300927000 (t)&#xA;xesam:artist =&amp;gt; ['Perturbator'] (as)&#xA;xesam:albumArtist =&amp;gt; ['Perturbator'] (as)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Chrome does seem to be a valid MPRIS provider, but it doesn't communicate the &lt;code&gt;mpris:artUrl&lt;/code&gt; metadata. &lt;a href=&quot;https://www.freedesktop.org/wiki/Specifications/mpris-spec/metadata/#mpris:arturl&quot; rel=&quot;nofollow noreferrer&quot;&gt;mpris:artUrl spec&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Possibly relevant Chromium issue: &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=951584&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.chromium.org/p/chromium/issues/detail?id=951584&lt;/a&gt;&#xA;Relevant diffs: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://chromium.googlesource.com/chromium/src.git/+/544b1dc0e7a755fe5d8d45944f95ed2601d2d05b%5E!/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://chromium.googlesource.com/chromium/src.git/+/544b1dc0e7a755fe5d8d45944f95ed2601d2d05b%5E!/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://chromium.googlesource.com/chromium/src/+/dae5564b63592c361fd3e1de590b7c7bb9ecb0b3%5E!/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://chromium.googlesource.com/chromium/src/+/dae5564b63592c361fd3e1de590b7c7bb9ecb0b3%5E!/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Not seeing &quot;artUrl&quot;. I've &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=951584#c4&quot; rel=&quot;nofollow noreferrer&quot;&gt;asked&lt;/a&gt; why they didn't include it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Interestingly these Chrome/Chromium extensions do set this &lt;code&gt;mpris:artUrl&lt;/code&gt; metadata:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;browser-mpris2: &lt;a href=&quot;https://github.com/otommod/browser-mpris2/blob/master/native/chrome-mpris2#L345&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/otommod/browser-mpris2/blob/master/native/chrome-mpris2#L345&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;browser-playerctl: &lt;a href=&quot;https://github.com/beingmohit/browser-playerctl/blob/master/mpris2#L345&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/beingmohit/browser-playerctl/blob/master/mpris2#L345&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I installed &lt;a href=&quot;https://github.com/beingmohit/browser-playerctl&quot; rel=&quot;nofollow noreferrer&quot;&gt;browser-playerctl&lt;/a&gt; and now I am getting more metadata on for example Youtube. (It didn't work with the &lt;a href=&quot;https://googlechrome.github.io/samples/media-session/audio.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Media Session API demo&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I get: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# Metadata update from extension&#xA;mpris:trackid =&amp;gt; objectpath '/lopwv2ViNMw' (o)&#xA;mpris:artUrl =&amp;gt; 'https://i.ytimg.com/vi/lopwv2ViNMw/hqdefault.jpg' (s)&#xA;mpris:length =&amp;gt; int64 787000000 (x)&#xA;xesam:url =&amp;gt; 'https://www.youtube.com/watch?v=lopwv2ViNMw' (s)&#xA;xesam:title =&amp;gt; '(777) How Corning Created Gorilla Glass And Reinvented Itself' (s)&#xA;&#xA;# Metadata update from Chromium&#xA;xesam:artist =&amp;gt; ['CNBC'] (as)&#xA;xesam:album =&amp;gt; '' (s)&#xA;xesam:title =&amp;gt; 'How Corning Created Gorilla Glass And Reinvented Itself' (s)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And we see the artwork in the indicator:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/KFTVn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KFTVn.png&quot; alt=&quot;Chromium in indicator with artwork&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure what's up with the &quot;(777)&quot; part. The extension also doesn't correctly communicate the artist (while Chrome itself does). So I wouldn't recommend installing these extensions. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess all we can do is keep an eye on the relevant Chromium issue ( &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=951584&quot; rel=&quot;nofollow noreferrer&quot;&gt;951584: MPRIS: Add media metadata&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some extra info: websites can share this info using the new Media Session API. Some resources:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://developer.mozilla.org/en-US/docs/Web/API/Media_Session_API&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developer.mozilla.org/en-US/docs/Web/API/Media_Session_API&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://developers.google.com/web/updates/2017/02/media-session&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developers.google.com/web/updates/2017/02/media-session&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Support: &lt;a href=&quot;https://caniuse.com/#search=Media%20Session%20API&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://caniuse.com/#search=Media%20Session%20API&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Online demo: &lt;a href=&quot;https://googlechrome.github.io/samples/media-session/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://googlechrome.github.io/samples/media-session/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2019-12-14T16:54:32.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21628" PostTypeId="1" CreationDate="2019-12-14T17:03:53.953" Score="0" ViewCount="177" Body="&lt;p&gt;Hera has a lot of bugs from what I can see, so I just wanna go back to Juno.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know how to do this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Reasons to rollback:&lt;/strong&gt; Menu bar is missing in most apps when they are in full screen mode. Also, when some apps are in full screen mode, and you try to open a new one, sometimes the workspace place the new app over the one that is in full screen mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Normal:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qA1gZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qA1gZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full screen:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rSCNs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rSCNs.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The header bar is now missing. This is the behavior in most of the apps in Hera.&lt;/p&gt;&#xA;" OwnerUserId="19841" LastEditorUserId="19841" LastEditDate="2019-12-14T18:09:54.580" LastActivityDate="2019-12-15T00:49:58.147" Title="Does anyone know how to downgrade elementary Hera back to Juno?" Tags="|release-juno|system-installation|updates|release-hera|" AnswerCount="3" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="21629" PostTypeId="2" ParentId="21628" CreationDate="2019-12-14T17:22:48.460" Score="0" Body="&lt;p&gt;It's going to be complicated, and I couldn't give you a simple answer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you really want to come back to JUNO I invite you to make a BackUp of your data and to re-install elementary OS Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't really like this answer because I assume that you want to do something simple but I have no other answer to give you maybe that someone will give you a better solution.&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-14T17:22:48.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21630" PostTypeId="2" ParentId="21628" CreationDate="2019-12-14T18:52:38.493" Score="2" Body="&lt;p&gt;The problem with rolling back to Juno (considering you take LinkPhoenix advice to reinstall Juno from scratch) is that Hera comes as an automatic update, so you wouldn't EVER be able to update anything on your system, or Hera would come along. Not sure this is what you want.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-12-14T18:52:38.493" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21631" PostTypeId="2" ParentId="14410" CreationDate="2019-12-14T20:42:56.987" Score="0" Body="&lt;p&gt;For card &lt;strong&gt;BCM4321&lt;/strong&gt; you need follow this link&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-14T20:42:56.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21633" PostTypeId="2" ParentId="3002" CreationDate="2019-12-14T23:28:41.667" Score="0" Body="&lt;h1&gt;Try samba GUI tool system-config-samba&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;Check samba is installed&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;smbd --version&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;install if required&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install samba samba-common-bin&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Run the following command to install it.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install system-config-samba&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Then we can start it from command line.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo system-config-samba&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;If you get the following error:&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;:~$ could not open configuration file `/etc/libuser.conf': No such file or directory&lt;/code&gt;  &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;You can fix it by creating an empty /etc/libuser.conf file with the following touch command.&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo touch /etc/libuser.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;@pblakez&lt;/h2&gt;&#xA;" OwnerUserId="2901" LastActivityDate="2019-12-14T23:28:41.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21634" PostTypeId="1" CreationDate="2019-12-15T00:43:19.453" Score="0" ViewCount="362" Body="&lt;p&gt;I've been trying to install elementary OS 5.1 for the past couple of hours with no luck. The installer keeps failing 2/3rds of the way with the following error message:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The installer encountered an error copying files to the hard disk:&#xA;[Errno 5] Input/output error&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm trying to install elementary OS from a USB stick onto a fresh hard disk (bought the SSD today).&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;My system&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel i5&lt;/li&gt;&#xA;&lt;li&gt;8GB ram&lt;/li&gt;&#xA;&lt;li&gt;GTX 650 TI&lt;/li&gt;&#xA;&lt;li&gt;the fresh 120GB SSD (previously working components). ISO filename: &lt;code&gt;elementaryos-5.1-stable.20191202.iso&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;What have I tried to do:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I've tried to burn the latest ISO using both Etcher and Rufus, but&#xA;with no luck. I've tried both ISO and DD versions in Rufus - no&#xA;difference.&lt;/li&gt;&#xA;&lt;li&gt;I've checked the hash, which matches up with the hash on the&#xA;installation guide page.&lt;/li&gt;&#xA;&lt;li&gt;I've tried to set up custom partitions when running the installer -&#xA;tried both ext4 and ext3 partition settings.&lt;/li&gt;&#xA;&lt;li&gt;I've tried to select the &quot;Try elementary OS&quot; option, and then running the&#xA;installer from terminal with &lt;code&gt;ubiquity&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I am honestly at a loss of what to try at this point...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="19853" LastEditorUserId="19853" LastEditDate="2019-12-15T01:57:14.720" LastActivityDate="2024-01-08T11:03:10.380" Title="Cannot install OS 5.1 - fails with errno 5 &quot;Input/ouput&quot;" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21635" PostTypeId="2" ParentId="21628" CreationDate="2019-12-15T00:49:58.147" Score="1" Body="&lt;p&gt;It looks like you are using a non-standard (to elementary) GTK theme and or window controls.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Revert to stock theme/controls and see if it behaves properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently bumped up against this as well and had to change my custom css theme to work again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HTH&lt;/p&gt;&#xA;" OwnerUserId="6372" LastActivityDate="2019-12-15T00:49:58.147" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21636" PostTypeId="2" ParentId="21614" CreationDate="2019-12-15T01:09:20.287" Score="0" Body="&lt;p&gt;Not sure it will going to work, but if I am in your place I will do a backup of ~/.config/monitors.xml, open it in some editor (elementary Code for example), change the resolutions there and restart the computer. If this leads you to a problem, you can delete the file into recovery mode or tty and restore it from the backup.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To create a copy of the file:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp ~/.config/monitors.xml ~/.config/monitors.xml.bak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To restore the file from tty:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pres &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt;, login with your username and password and execute:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/.config/monitors.xml &amp;amp;&amp;amp; mv ~/.config/monitors.xml.bak ~/.config/monitors.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;To restore the file using Recovery mode:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &lt;strong&gt;advanced options for elementary OS&lt;/strong&gt; from the grub boot screen, then the first option with (recovery mode) into the name. Wait until the menu appears, choose &lt;strong&gt;Root shell&lt;/strong&gt;. There you have to navigate to your user folder and restore the file, replace YOUR_USER_NAME below with your username folder.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/YOUR_USER_NAME/.config &amp;amp;&amp;amp; rm monitors.xml &amp;amp;&amp;amp; mv monitors.xml.bak monitors.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-15T01:09:20.287" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21637" PostTypeId="1" CreationDate="2019-12-15T03:57:31.320" Score="0" ViewCount="836" Body="&lt;p&gt;I am having problems with internal microphone on elementary OS 5.1 Hera(based on Ubuntu 18.04.3 LTS). Linux is not detecting the internal microphone. If I plugin a headphone with microphone, it will be working fine. Also there is no problem with the internal speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo pavucontrol&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cAkZq.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried all the methods specified &lt;a href=&quot;https://itsfoss.com/fix-sound-ubuntu-1304-quick-tip/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I have tried editing &lt;code&gt;/etc/modprobe.d/alsa-base.conf&lt;/code&gt; with &lt;code&gt;options snd-hda-intel model=dell&lt;/code&gt; which didn't worked as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Following are the output for &lt;code&gt;head -n 1 /proc/asound/card0/codec*&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;==&amp;gt; /proc/asound/card0/codec#0 &amp;lt;==&#xA;    Codec: Realtek ALC3254&#xA;&#xA;==&amp;gt; /proc/asound/card0/codec#2 &amp;lt;==&#xA;    Codec: Intel Kabylake HDMI&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Here is my &lt;a href=&quot;http://alsa-project.org/db/?f=ec23cfc4bddc6d77ea1a51c2c6e7aceb7aec95d1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Alsa logs&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do anyone have any ideas to solve this?&lt;/p&gt;&#xA;" OwnerUserId="19855" LastEditorUserId="19360" LastEditDate="2019-12-16T03:28:49.543" LastActivityDate="2020-06-29T09:04:35.700" Title="Dell inspiron 7591 in-build microphone not working" Tags="|sound|release-hera|dell|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21638" PostTypeId="1" CreationDate="2019-12-15T04:59:53.127" Score="1" ViewCount="812" Body="&lt;p&gt;I just installed elementary OS 5.1. I'd like to know &lt;strong&gt;how to set the laptop to not go into sleep mode and not ask for the password every time&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did go into power control and set everything for never, however it still goes into sleep mode. &lt;/p&gt;&#xA;" OwnerUserId="19858" LastEditorUserId="19360" LastEditDate="2019-12-16T03:28:03.673" LastActivityDate="2023-12-25T21:05:50.663" Title="Elementary OS 5.1 Going Into Sleep Mode Requesting Password" Tags="|suspend|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21639" PostTypeId="1" CreationDate="2019-12-15T07:50:58.173" Score="0" ViewCount="489" Body="&lt;p&gt;I'm new to elementary OS.  Have successfully installed elementary OS onto &#xA;PC and have Internet working. Plus local printing to Canon MX320.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I am wanting to use elementary OS to provide a Network Print Server function, so other PCs on the local network can remotely print to the Canon MX320 connected to the elementary OS PC (via USB).  Of course, the elementary OS PC will be need to be powered on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does elementary OS 5.1 Hera support Network Print Server functionality?&lt;/p&gt;&#xA;" OwnerUserId="19861" LastEditorUserId="19360" LastEditDate="2019-12-15T23:33:37.663" LastActivityDate="2023-12-25T08:02:10.220" Title="How To Configure Network Print Server" Tags="|networking|printer|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21640" PostTypeId="2" ParentId="21639" CreationDate="2019-12-15T08:30:31.773" Score="0" Body="&lt;p&gt;Great you got new to elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS being a Linux like any other bassed under Ubuntu (Hera is bassed on version 18.04 LTS) you can perfectly use &lt;code&gt;CUPS&lt;/code&gt; &lt;strong&gt;(Common UNIX Printing System)&lt;/strong&gt; to make your print server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I invite you to follow &lt;a href=&quot;https://help.ubuntu.com/lts/serverguide/cups.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt; to help you configure your print server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you have problems you may need to install the drivers for CANON printer &lt;code&gt;cups-backend-bjnp&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install cups-backend-bjnp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-15T08:30:31.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21641" PostTypeId="2" ParentId="21638" CreationDate="2019-12-15T09:37:08.287" Score="0" Body="&lt;h1&gt;How do not ask password after suspend with elementary OS?&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;Check the value of the configuration&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings get apps.light-locker lock-on-suspend&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;true&lt;/code&gt; : The screen will be locked when the computer goes to sleep &lt;br&gt;&#xA;If &lt;code&gt;false&lt;/code&gt; : Screen will not be locked when computer goes to sleep&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Enable&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set apps.light-locker lock-on-suspend 'true'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h2&gt;Disbale&lt;/h2&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set apps.light-locker lock-on-suspend 'false'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;How to never suspend my laptop on elementary OS?&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;In command line&lt;/h2&gt;&#xA;&#xA;&lt;h3&gt;Check config&lt;/h3&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# AC Mode&#xA;gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;# Battery Mode&#xA;gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;blank&lt;/li&gt;&#xA;&lt;li&gt;suspend&lt;/li&gt;&#xA;&lt;li&gt;shutdown&lt;/li&gt;&#xA;&lt;li&gt;hibernate&lt;/li&gt;&#xA;&lt;li&gt;interactive&lt;/li&gt;&#xA;&lt;li&gt;nothing&lt;/li&gt;&#xA;&lt;li&gt;logout&lt;br&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# AC mode&#xA;$ gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout&#xA;#Battery Mode&#xA;$ gsettings get org.gnome.settings-daemon.plugins.power sleep-battery-ac-timeout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;0 = NEVER&lt;/li&gt;&#xA;&lt;li&gt;300 = 5 min&lt;/li&gt;&#xA;&lt;li&gt;600 = 10 min&lt;/li&gt;&#xA;&lt;li&gt;900 = 15 min&lt;/li&gt;&#xA;&lt;li&gt;1800 = 30 min&lt;/li&gt;&#xA;&lt;li&gt;2700 = 45 min&lt;/li&gt;&#xA;&lt;li&gt;3600 = 1 hour&lt;/li&gt;&#xA;&lt;li&gt;7200 = 2 hours&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;Disable&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# DO NOTHING&#xA;# AC Mode&#xA;gsettings ste org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;# Battery Mode&#xA;gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type nothing&#xA;# DISABLE TIMEOUT&#xA;# AC mode&#xA;$ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0&#xA;#Battery Mode&#xA;$ gsettings set org.gnome.settings-daemon.plugins.power sleep-battery-ac-timeout 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-15T10:01:40.103" LastActivityDate="2019-12-15T10:01:40.103" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21642" PostTypeId="1" CreationDate="2019-12-15T12:01:20.363" Score="0" ViewCount="49" Body="&lt;p&gt;I have a dual boot with elementary OS and Windows and somehow I wasn't able to enter Windows and Grub rescue appeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I entered &lt;code&gt;set root=(hd0,msdos4)/@&lt;/code&gt; and &lt;code&gt;set prefix=(hd0,msdos4)/@/boot/grub&lt;/code&gt; as I found on q&amp;amp;a board. After I entered &lt;code&gt;insmod normal&lt;/code&gt; but there was an  &lt;code&gt;error: unknown filesystem&lt;/code&gt;. I rebooted and could enter Windows at this point. I then tried to enter elementary OS but it was some error telling &lt;code&gt;&quot;can't read outside hd0&quot; iirc&lt;/code&gt;. I read that I also need to update grub, that's why I was trying to get in on elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I figured I set it too narrow for multiple systems so I went and entered in grub rescue &lt;code&gt;set root=(hd0)&lt;/code&gt;, &lt;code&gt;set prefix=(hd0)/boot/grub&lt;/code&gt;, and then &lt;code&gt;insmod normal&lt;/code&gt;, &lt;code&gt;normal&lt;/code&gt; without any errors this time. After this I did a reboot and now facing 'Read error' not being able to enter grub rescue again. I'm trying to recover it in terminal from USB now but I believe I can only see my USB drive from there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the boot info I got: &lt;a href=&quot;https://paste.ubuntu.com/p/9fY5w3gnXT/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://paste.ubuntu.com/p/9fY5w3gnXT/&lt;/a&gt; with flash drive in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My HDD is 500GB which is not displayed. But it displays in BIOS. Somehow I managed to get into Windows after creating Xindows live USB with Unetbootin (grub menu appeared), everything was slow and after rebooting I was unable to replicate it and load Windows again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I get the system back?&lt;/p&gt;&#xA;" OwnerUserId="19862" LastEditorUserId="19862" LastEditDate="2019-12-15T12:19:11.547" LastActivityDate="2019-12-15T12:19:11.547" Title="Read error after wrong 'set root' in grub rescue" Tags="|dual-boot|grub|hardware|usb-drive|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21643" PostTypeId="2" ParentId="21623" CreationDate="2019-12-15T12:02:53.543" Score="0" Body="&lt;p&gt;I do not have problem controlling the sound volume when a youtube video plays in firefox? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The keyboard volume controls work, also the volume slider. I do not know if it is the reason, but I'm using &lt;strong&gt;PulseAudio Volume Control&lt;/strong&gt; and using it I can even control firefox audio volume individually than the other applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8QUrA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8QUrA.png&quot; alt=&quot;PulseAudio Volume Control&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it is true - using any web browser different that Firefox (tested with Brave, Chromium and Opera) I can see media controls clicking the audio volume icon in wingpannel, but not for &lt;strong&gt;Firefox&lt;/strong&gt;, also &lt;strong&gt;Epiphany&lt;/strong&gt; is missing.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-15T12:12:59.610" LastActivityDate="2019-12-15T12:12:59.610" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21644" PostTypeId="2" ParentId="21620" CreationDate="2019-12-15T12:49:41.543" Score="0" Body="&lt;p&gt;I believe the problem is because you have deleted the windows recovery partition. I have similar experience by deleting windows recovery partition on another computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I do not pretend that this is the best approach&lt;/strong&gt; but if I am in a situation like yours I will proceed like this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;boot into elementary os&lt;/li&gt;&#xA;&lt;li&gt;backup all Windows data I want to save, install Gparted if it is not installed yet and remove all ntfs and *fat partitions. Create a new NTFS one. &lt;/li&gt;&#xA;&lt;li&gt;backup all data I want to save from elementary OS because usually installing windows destroys the Linux installations.&lt;/li&gt;&#xA;&lt;li&gt;Install Windows&lt;/li&gt;&#xA;&lt;li&gt;Install elementary OS. It is possible just to repair the elementary OS installation with some recovery cd, but if you do not have so much things to save (you said that it is not and old installation with a lot of programs and services installed) you better wipe it and reinstall it from sctratch.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;*// the &lt;strong&gt;boot/efi&lt;/strong&gt; is in a vfat partition, probably it is possible to save elementary OS if you keep this partition, but based on my experience windows will overwrite it and usually it will contain a lot of bulk data. There is also an option to save the efi bootloader information from there somewhere and after installing windows to restore it, but I never succeeded doing like this. I don't say it is impossible, but again, &lt;strong&gt;if I am in your situation&lt;/strong&gt; I will make everything from sctratch.  &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-15T12:49:41.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21647" PostTypeId="1" AcceptedAnswerId="21650" CreationDate="2019-12-15T16:52:59.533" Score="1" ViewCount="64" Body="&lt;p&gt;I’ve tried many things on many threads here and still can’t manage to get the wifi working when it randomly drops..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;No it is not my connection because I have the same issue at uni.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reset the network manager it actually tries searching for access points but then quickly fails... it is so frustrating having to reset my laptop ( Microsoft Surface Book ) over and over..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really want to use elementary OS but these WiFi issues are seriously bugging me. I thought by restarting the network manager and having it re-search for access points it would start working but it just says no access points available after 2 seconds. When I restart my laptop it finds the access point and connects IMMEDIATELY! What is the restart doing that the&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;does not do.&lt;/p&gt;&#xA;" OwnerUserId="19856" LastEditorUserId="19360" LastEditDate="2019-12-16T03:29:10.670" LastActivityDate="2019-12-16T03:29:10.670" Title="What is restarting my laptop doing that the “sudo service network-manager restart” isn't?" Tags="|wifi|internet|release-hera|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21648" PostTypeId="2" ParentId="21523" CreationDate="2019-12-15T17:39:56.027" Score="0" Body="&lt;p&gt;OK, for the past few days I've been trying different approaches to have this issue sorted out using various config changes, unfortunately none of the modifications I have done was actually working the way I wanted. At the end what I've decided to do it to use the most complicated way to have my FHD mod working by getting rid of Lenovo Bios and flashing Coreboot. I've done this in the past but I came back to Lenovo bios afterwards because of power management (the lack of) in Coreboot. Looks like things have changed since that time as it now have ACPI compatibility so it behaves a bit better in power management department. I've flashed first successful Coreboot compile today and so far it looks and works fine, the bast part is that OS can see only one display now :)&lt;/p&gt;&#xA;" OwnerUserId="11915" LastActivityDate="2019-12-15T17:39:56.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21649" PostTypeId="1" CreationDate="2019-12-15T18:02:12.203" Score="1" ViewCount="228" Body="&lt;p&gt;I have an HP laptop with Windows and Elementary OS Loki but when trying to install Hera it just keeps hanging in &quot;Detecting filesystem&quot;.&#xA;I had a similar issue installing Juno but only kept crashing while in the installation menu (gave up after several tries).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically I have a few partitions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;/home&lt;/li&gt;&#xA;&lt;li&gt;/ (Loki)&lt;/li&gt;&#xA;&lt;li&gt;/swap&lt;/li&gt;&#xA;&lt;li&gt;between 5 and 8 Windows' partitions (they were created automatically, I guess)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;While installing, I keep the /home and /swap and choose Hera to install in the Loki partition. I proceed and after checking if the changes are ok it says this:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;the installer needs to commit changes to partition tables, but cannot&#xA;  do so because partitions on the following mount points could not be&#xA;  unmounted:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;/cdrom&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Please close any applications using these mount points&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Would you like the installer to try to unmount these partitions again?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I click continue and the &quot;Detecting filesystem&quot; window appears and in the details it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary ubiquity[3990]: Step_before = stepUserInfo&#xA;elementary systemd[1]: Starting Cleanup of Temporary Directories...&#xA;elementary systemd[1]: Started Cleanup of Temporary Directories.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After a few minutes it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;elementary CRON [16065]: (root) CMD (   cd / &amp;amp;&amp;amp; run-parts --report /etc/cron.hourly)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And it repeats the same thing every hour...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried with &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=1645214&amp;amp;page=2&amp;amp;p=10241015#post10241015&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; but didn't work. Could anyone help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="19867" LastActivityDate="2023-12-25T06:04:25.567" Title="Can't Install Elementary 5.1" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21650" PostTypeId="2" ParentId="21647" CreationDate="2019-12-15T18:59:42.880" Score="0" Body="&lt;p&gt;For your Surface Book to work well with Linux you have to watch your Github project, there is a specific Kernel and drivers for Microsoft Surface&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/jakeday/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jakeday/linux-surface&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;h1&gt;From the Github README&lt;/h1&gt;&#xA;&#xA;&lt;h2&gt;Instructions&lt;/h2&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;(Prep) Install Dependencies:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git curl wget sed&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Clone the linux-surface repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone --depth 1 https://github.com/jakeday/linux-surface.git ~/linux-surface&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change directory to linux-surface repo:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd ~/linux-surface&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run setup script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh setup.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot on installed kernel.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The setup script will handle installing the latest kernel for you. You can also choose to download any version you want and install yourself: Install the headers, kernel and libc-dev (make sure you cd to your download location first):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i linux-headers-[VERSION].deb linux-image-[VERSION].deb linux-libc-dev-[VERSION].deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For more informations please read all the README in the Github's project&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-15T19:05:52.193" LastActivityDate="2019-12-15T19:05:52.193" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21651" PostTypeId="2" ParentId="21649" CreationDate="2019-12-15T20:09:55.643" Score="0" Body="&lt;p&gt;I might be wrong, but I am almost sure that before I installed Juno I read somewhere that it was recommended to remove older versions of elementary before installing. I had no previous versions, so I didn't put all too much attention to it and went on with the parts pertinent to my installation.&#xA;So the question would be: did you remove Loki beofre attempting to install Juno? Once you got Juno, Hera will come automatically, but apparently it's not the case with Loki-to-Juno upgrade.&lt;/p&gt;&#xA;" OwnerUserId="19358" LastActivityDate="2019-12-15T20:09:55.643" CommentCount="13" ContentLicense="CC BY-SA 4.0" />
  <row Id="21657" PostTypeId="1" CreationDate="2019-12-16T02:04:21.883" Score="4" ViewCount="423" Body="&lt;p&gt;It would help a lot in keeping track of which workspace I'm in if I could set different wallpapers on each workspace. I would even go so far as to say this should be the default behavior of choosing a wallpaper: It applies only to the workspace you're running Settings from. A quick scan of the Ubuntu forums seems to indicate that such a thing should be possible ...&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="16827" LastEditDate="2019-12-17T15:55:50.673" LastActivityDate="2020-05-18T02:04:05.523" Title="How do I get a different wallpaper for different workspaces" Tags="|wallpaper|workspace|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21658" PostTypeId="1" CreationDate="2019-12-16T02:51:52.873" Score="0" ViewCount="366" Body="&lt;p&gt;Whenever I try to watch a video on YouTube, the video is completely unwatchable as seen in the image below:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/yWoIR.jpg&quot; alt=&quot;YouTube VSync issues&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;How to fix this in elementary 5.1?&lt;/p&gt;&#xA;" OwnerUserId="17939" LastEditorUserId="25612" LastEditDate="2023-05-01T00:44:37.123" LastActivityDate="2024-01-26T03:02:15.273" Title="Epiphany browser youtube error" Tags="|epiphany|web-browser|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21659" PostTypeId="2" ParentId="10995" CreationDate="2019-12-16T08:47:53.053" Score="0" Body="&lt;p&gt;download a free app from the AppCenter called Dimmer&lt;/p&gt;&#xA;" OwnerUserId="19875" LastActivityDate="2019-12-16T08:47:53.053" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21660" PostTypeId="1" CreationDate="2019-12-16T10:48:37.927" Score="1" ViewCount="686" Body="&lt;p&gt;I installed Wine via Appcenter. All good. But when I wanted to start 32bit program it said - wine32 wasn't installed, please install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I try to install Wine32, but then it goes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; ivan@ivan-linux:~/Downloads$ sudo apt-get install wine32&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; wine32:i386 : Depends: libwine:i386 (= 3.0-1ubuntu1) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when I try to pinpoint dep. of libwine:386 it goes way back to pulseaudio 32bit and asks to remove some crucial Elementary packages, like Elementary desktop.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; libwine:i386 : Depends: libpulse0:i386 (&amp;gt;= 0.99.1) but it is not going to be installed&#xA;                Recommends: libasound2-plugins:i386 but it is not going to be installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I stop there. IF not this is what it wants:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ivan@ivan-linux:~/Downloads$ sudo apt-get install libpulse0:i386&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  espeak-ng-data fonts-wine gir1.2-wnck-3.0 io.elementary.cerbere libao-common libao4 libasyncns0 libaudio2 libcapi20-3 libdotconf0 libodbc1 libopenal-data&#xA;  libopenal1 libosmesa6 libsnapd-glib1 libsndfile1 libsndio6.1 libsonic0 libspeechd2 libspeexdsp1 libwebrtc-audio-processing1 nautilus-data&#xA;  ocl-icd-libopencl1 python3-brlapi python3-louis python3-pyatspi python3-speechd rtkit sound-icons xbrlapi&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following additional packages will be installed:&#xA;  libasyncns0:i386 libdbus-1-3:i386 libflac8:i386 libogg0:i386 libsndfile1:i386 libvorbis0a:i386 libvorbisenc2:i386 libwrap0:i386&#xA;Suggested packages:&#xA;  pulseaudio:i386&#xA;The following packages will be REMOVED:&#xA;  elementary-desktop gala gnome-settings-daemon gstreamer1.0-pulseaudio libasound2-plugins libcanberra-pulse libespeak-ng1 libpcaudio0&#xA;  libpulse-mainloop-glib0 libpulse0 libpulsedsp libsdl2-2.0-0 libwine orca pantheon-shell pantheon-xsession-settings pulseaudio pulseaudio-utils&#xA;  speech-dispatcher speech-dispatcher-audio-plugins speech-dispatcher-espeak-ng switchboard-plug-notifications switchboard-plug-pantheon-shell&#xA;  switchboard-plug-sound wine-stable wine-stable-amd64 wine64 wingpanel-indicator-sound&#xA;The following NEW packages will be installed:&#xA;  libasyncns0:i386 libdbus-1-3:i386 libflac8:i386 libogg0:i386 libpulse0:i386 libsndfile1:i386 libvorbis0a:i386 libvorbisenc2:i386 libwrap0:i386&#xA;0 upgraded, 9 newly installed, 28 to remove and 0 not upgraded.&#xA;Need to get 1026 kB of archives.&#xA;After this operation, 431 MB disk space will be freed.&#xA;Do you want to continue? [Y/n] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;... how do I get around that?&lt;/p&gt;&#xA;" OwnerUserId="19817" LastEditorUserId="19817" LastEditDate="2019-12-17T23:44:38.247" LastActivityDate="2024-02-04T22:10:01.240" Title="How to install/use Wine in Elementary (Wine32 that is)?" Tags="|wine|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21661" PostTypeId="2" ParentId="21547" CreationDate="2019-12-16T12:08:58.913" Score="7" Body="&lt;p&gt;Found This on reddit&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;blockquote&gt;&#xA;    &lt;p&gt;Delete nm-applet from here:&lt;/p&gt;&#xA;    &#xA;    &lt;p&gt;/etc/xdg/autostart/nm-applet.desktop&lt;/p&gt;&#xA;  &lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I didn't delete it, just append .old at the end of the filename&lt;/p&gt;&#xA;" OwnerUserId="19799" LastActivityDate="2019-12-16T12:08:58.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21662" PostTypeId="1" CreationDate="2019-12-16T14:26:44.193" Score="1" ViewCount="45" Body="&lt;p&gt;Is there an official channel for developers. I tried to bring up the slack channel they had on the developer documentation but it seems to be offline. I'm stuck with an issue on the app that I'm trying to develop and can't find an answer/solution anywhere. I'm a newbie dev.&lt;/p&gt;&#xA;" OwnerUserId="6898" LastActivityDate="2020-01-19T11:01:30.180" Title="Developer Support?" Tags="|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21664" PostTypeId="1" AcceptedAnswerId="21667" CreationDate="2019-12-16T15:46:33.983" Score="0" ViewCount="56" Body="&lt;p&gt;I just installed version 5.1 and need to type in Spanish. I can't find where to add the international layout to the keyboard. It does not appear on the keyboard layout options on system settings.&lt;/p&gt;&#xA;" OwnerUserId="19882" LastActivityDate="2019-12-31T18:31:46.840" Title="International Keyboard" Tags="|keyboard|release-hera|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21665" PostTypeId="1" CreationDate="2019-12-16T16:02:24.117" Score="0" ViewCount="75" Body="&lt;p&gt;I have a problem, the calendar application icons are not visible after the eos installation. It does not even appear over time. I have reinstalled the system several times and in vain, it doesn't work. And there is no icon only in this menu, in the rest of the menu it is&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ldjol.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ldjol.png&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19883" LastEditorUserId="308" LastEditDate="2019-12-19T19:49:14.847" LastActivityDate="2023-12-29T05:02:15.327" Title="Why does the calendar icon not show up?" Tags="|calendar|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21667" PostTypeId="2" ParentId="21664" CreationDate="2019-12-16T18:32:20.533" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WFPWR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WFPWR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;code&gt;System Settings&lt;/code&gt; &gt; &lt;code&gt;Keyboard&lt;/code&gt; &gt; &lt;code&gt;+&lt;/code&gt; in the lower-right corner &gt; Select &lt;code&gt;Spanish&lt;/code&gt; and click &lt;code&gt;Add Layout&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you'll be able to switch between your current layout and Spanish layout in the menubar of via shortcut.&lt;/p&gt;&#xA;" OwnerUserId="17985" LastEditorUserId="19360" LastEditDate="2019-12-31T18:31:46.840" LastActivityDate="2019-12-31T18:31:46.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21668" PostTypeId="2" ParentId="21657" CreationDate="2019-12-16T21:47:34.607" Score="-1" Body="&lt;p&gt;I think this is a very good question, for users like me who work always in full screen it has no interest, but I think for users who do not necessarily work with windows in Full screen, this can be useful for easily identifying workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However you have here all the keyboard shortcuts to work with Workspaces with elementary OS (2019), you can find this on&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Systeme =&gt; Keyboard =&gt; Shortcuts =&gt; Workspaces&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vHw3D.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vHw3D.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2019-12-19T22:33:41.710" LastActivityDate="2019-12-19T22:33:41.710" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21669" PostTypeId="2" ParentId="18554" CreationDate="2019-12-16T21:54:00.233" Score="0" Body="&lt;p&gt;For the second part of your question&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;...make notification when battery already full in charge?&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;You can follow this answer &lt;a href=&quot;https://askubuntu.com/a/682498/1013655&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-16T21:54:00.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21670" PostTypeId="1" CreationDate="2019-12-16T23:28:53.300" Score="0" ViewCount="187" Body="&lt;p&gt;Somehow my appcenter broken since 1 month or so. Appcenter not showing Trending &amp;amp; always showing same 2 apps on Recently Updated. Is there a way to fix this without reinstalling Elementary OS? Is this bug related with my problem?: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1848387&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/appstream/+bug/1848387&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s30QR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s30QR.png&quot; alt=&quot;appcenter&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~ $ dpkg-query --showformat='${Package}:\t${Version}\n' --show appstream appcenter appstream-data-pantheon&#xA;appcenter:  3.2.1+r2106+pkg83~ubuntu5.0.1&#xA;appstream:  0.12.9-1+elementary11~ubuntu5.1.1&#xA;appstream-data-pantheon:    5.0-0+r82~ubuntu5.1.1&#xA; ~ $ head -2 /etc/os-release&#xA;NAME=&quot;elementary OS&quot;&#xA;VERSION=&quot;5.1 Hera&quot;&#xA; ~ $ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Appcenter terminal output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ io.elementary.appcenter&#xA;&#xA;** (io.elementary.appcenter:4997): CRITICAL **: 00:59:45.701: PackageKitBackend.vala:163: Unable to add data: MDB_BAD_VALSIZE: Unsupported size of key/DB name/data, or wrong DUPFIXED size&#xA;&#xA;** (io.elementary.appcenter:4997): WARNING **: 00:59:46.165: FlatpakBackend.vala:448: Errors found in flatpak appdata, some components may be incomplete/missing: Unable to add data: MDB_BAD_VALSIZE: Unsupported size of key/DB name/data, or wrong DUPFIXED size&#xA;&#xA;** (io.elementary.appcenter:4997): CRITICAL **: 00:59:56.557: PackageKitBackend.vala:163: Unable to add data: MDB_BAD_VALSIZE: Unsupported size of key/DB name/data, or wrong DUPFIXED size&#xA;&#xA;** (io.elementary.appcenter:4997): WARNING **: 01:00:00.644: FlatpakBackend.vala:448: Errors found in flatpak appdata, some components may be incomplete/missing: Unable to add data: MDB_BAD_VALSIZE: Unsupported size of key/DB name/data, or wrong DUPFIXED size&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Trying to re-install appstream-data:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install --reinstall appstream-data-pantheon appstream-data-pantheon-icons appstream-data-pantheon-icons-hidpi&#xA;Paket listeleri okunuyor... Bitti&#xA;Bağımlılık ağacı oluşturuluyor       &#xA;Durum bilgisi okunuyor... Bitti      &#xA;0 paket yükseltilecek, 0 yeni paket kurulacak, 3 paket yeniden kurulacak, 0 paket kaldırılacak ve 0 paket yükseltilmeyecek.&#xA;498 kB arşiv dosyası indirilecek.&#xA;Bu işlem tamamlandıktan sonra 0 B ek disk alanı kullanılacak.&#xA;İndir: 1 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon all 5.0-0+r82~ubuntu5.1.1 [197 kB]&#xA;İndir: 2 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon-icons all 5.0-0+r82~ubuntu5.1.1 [205 kB]&#xA;İndir: 3 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 appstream-data-pantheon-icons-hidpi all 5.0-0+r82~ubuntu5.1.1 [96,4 kB]&#xA;1 sn.'de 498 kB alındı (418 kB/s)                             &#xA;(Veritabanı okunuyor ... 181951 dosya veya dizin kurulu durumda.)&#xA;Paket açılacak: .../appstream-data-pantheon_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Paket açılıyor: appstream-data-pantheon (5.0-0+r82~ubuntu5.1.1) üzerine (5.0-0+r82~ubuntu5.1.1) ...&#xA;Paket açılacak: .../appstream-data-pantheon-icons_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Paket açılıyor: appstream-data-pantheon-icons (5.0-0+r82~ubuntu5.1.1) üzerine (5.0-0+r82~ubuntu5.1.1) ...&#xA;Paket açılacak: .../appstream-data-pantheon-icons-hidpi_5.0-0+r82~ubuntu5.1.1_all.deb ...&#xA;Paket açılıyor: appstream-data-pantheon-icons-hidpi (5.0-0+r82~ubuntu5.1.1) üzerine (5.0-0+r82~ubuntu5.1.1) ...&#xA;Ayarlanıyor: appstream-data-pantheon (5.0-0+r82~ubuntu5.1.1) ...&#xA;Ayarlanıyor: appstream-data-pantheon-icons (5.0-0+r82~ubuntu5.1.1) ...&#xA;Ayarlanıyor: appstream-data-pantheon-icons-hidpi (5.0-0+r82~ubuntu5.1.1) ...&#xA;Tetikleyiciler işleniyor: appstream (0.12.9-1+elementary11~ubuntu5.1.1) ...&#xA;dpkg: hata: '/usr/share/app-info/yaml /usr/share/app-info/icons' sürümünü hatalı söz dizimine sahip: sürüm dizgisinde boşluk karakterleri var&#xA;(null)&#xA; ~ $&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My appstream status:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo appstreamcli status&#xA;AppStream Durumu:&#xA;Sürüm: 0.12.9&#xA;&#xA;Dağıtım üst verisi:&#xA; /usr/share/app-info&#xA;  - YAML: 2&#xA;  - Simge Kümeleri:&#xA;     elementary-bionic-extra&#xA;     elementary-stable-bionic-main&#xA;&#xA; /var/lib/app-info&#xA;  - YAML: 11&#xA;  - Simge Kümeleri:&#xA;     ubuntu-bionic-main&#xA;     ubuntu-bionic-universe&#xA;     ubuntu-bionic-multiverse&#xA;     appcenter-bionic-main&#xA;     ubuntu-bionic-security-main&#xA;     ubuntu-bionic-updates-main&#xA;     ubuntu-bionic-security-universe&#xA;     ubuntu-bionic-security-multiverse&#xA;     ubuntu-bionic-updates-universe&#xA;     ubuntu-bionic-updates-multiverse&#xA;     ubuntu-bionic-backports-universe&#xA;&#xA; /var/cache/app-info&#xA;  - Boş.&#xA;&#xA;Üst veri dosyaları:&#xA;  - 62 bileşen bulundu.&#xA;  - Eski veriyollarında 8 bileşen bulundu.&#xA;&#xA;Özet: Error while loading the metadata pool: Unable to add data: MDB_BAD_VALSIZE: Unsupported size of key/DB name/data, or wrong DUPFIXED size&#xA; ~ $&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18424" LastEditorUserId="19966" LastEditDate="2019-12-23T14:20:32.053" LastActivityDate="2024-01-20T06:06:45.810" Title="My appcenter not showing Trending &amp; always showing same 2 apps on Recently Updated" Tags="|appcenter|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21671" PostTypeId="1" CreationDate="2019-12-17T00:52:54.633" Score="0" ViewCount="144" Body="&lt;p&gt;By default, &quot;Wired&quot; is turned off. However, available wifi is not displayed. I also cannot click &quot;Advanced Settings&quot; button on the bottom right corner. &lt;/p&gt;&#xA;" OwnerUserId="19888" LastActivityDate="2023-12-26T20:09:16.140" Title="Cannot connect to wifi on elementary OS" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21673" PostTypeId="1" CreationDate="2019-12-17T04:26:42.457" Score="0" ViewCount="62" Body="&lt;p&gt;Videos do not play on Facebook when using Epiphany. Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="19858" LastEditorUserId="308" LastEditDate="2019-12-19T01:01:40.360" LastActivityDate="2024-01-03T18:08:46.137" Title="How can I get Facebook videos to play in Epihany?" Tags="|video-playback|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21674" PostTypeId="1" AcceptedAnswerId="21698" CreationDate="2019-12-17T04:39:11.947" Score="0" ViewCount="313" Body="&lt;p&gt;I have a Dell Precision 5510 with 32GB RAM which I set up to dual-boot (Win10, Elementary OS). The PC has 32GB of RAM but when running Elementary OS everything is SLOW! When I ran htop I saw that Mem was about 1 / 1.29GB. Why only 1.29GB when the PC has 32GB of RAM?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tGaDh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tGaDh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ZsLIk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZsLIk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I set the swap size to 0.5 the amount of RAM when I set up Elementary (I thought I saw an instruction that told to do that). Not sure if that was the problem. I tried to see how to change the swap partition size in GParted and it didn't seem that I could change it. Not sure if I have to change the partition size in Windows although I don't understand why that would hurt RAM usage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'free - h' confirms that 1.3GB are available:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;              total        used        free      shared  buff/cache   available&#xA;Mem:           1.3G        944M        108M         58M        267M        121M&#xA;Swap:           14G        1.5G         13G&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But running 'dmidecode --type memory' confirms that 32GB of Physical Memory are available:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# dmidecode 3.1&#xA;Getting SMBIOS data from sysfs.&#xA;SMBIOS 2.8 present.&#xA;&#xA;Handle 0x0038, DMI type 16, 23 bytes&#xA;Physical Memory Array&#xA;    Location: System Board Or Motherboard&#xA;    Use: System Memory&#xA;    Error Correction Type: None&#xA;    Maximum Capacity: 32 GB&#xA;    Error Information Handle: Not Provided&#xA;    Number Of Devices: 2&#xA;&#xA;Handle 0x0039, DMI type 17, 40 bytes&#xA;Memory Device&#xA;    Array Handle: 0x0038&#xA;    Error Information Handle: Not Provided&#xA;    Total Width: 64 bits&#xA;    Data Width: 64 bits&#xA;    Size: 16384 MB&#xA;    Form Factor: SODIMM&#xA;    Set: None&#xA;    Locator: DIMM A&#xA;    Bank Locator: DIMM A&#xA;    Type: DDR4&#xA;    Type Detail: Synchronous&#xA;    Speed: 2133 MT/s&#xA;    Manufacturer: Micron&#xA;    Serial Number: 12161215&#xA;    Asset Tag: 2C0C0000&#xA;    Part Number: 16ATF2G64HZ-2G1A1   &#xA;    Rank: 2&#xA;    Configured Clock Speed: 2133 MT/s&#xA;    Minimum Voltage: Unknown&#xA;    Maximum Voltage: Unknown&#xA;    Configured Voltage: 1.2 V&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running 'cat /etc/*release' gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=5.1&#xA;DISTRIB_CODENAME=hera&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS 5.1 Hera&quot;&#xA;NAME=&quot;elementary OS&quot;&#xA;VERSION=&quot;5.1 Hera&quot;&#xA;ID=elementary&#xA;ID_LIKE=ubuntu&#xA;PRETTY_NAME=&quot;elementary OS 5.1 Hera&quot;&#xA;LOGO=distributor-logo&#xA;VERSION_ID=&quot;5.1&quot;&#xA;HOME_URL=&quot;https://elementary.io/&quot;&#xA;SUPPORT_URL=&quot;https://elementary.io/support&quot;&#xA;BUG_REPORT_URL=&quot;https://github.com/elementary/os/issues/new&quot;&#xA;PRIVACY_POLICY_URL=&quot;https://elementary.io/privacy-policy&quot;&#xA;VERSION_CODENAME=hera&#xA;UBUNTU_CODENAME=bionic&#xA;cat: /etc/upstream-release: Is a directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running 'uname -a' gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Linux lps-elementary 5.0.0-37-generic #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Running 'dmesg | grep -e error -e ERROR -e fail' gives&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    0.240486] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM&#xA;[    1.192665] ACPI Error: Method parse/execution failed \PNOT, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.192669] ACPI Error: Method parse/execution failed \_SB.AC._PSR, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.204329] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.204334] ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.216504] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.216510] ACPI Error: Method parse/execution failed \_TZ.FN00._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.228490] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.228496] ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.240471] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.240477] ACPI Error: Method parse/execution failed \_TZ.FN01._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.252491] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.252497] ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.264486] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.264492] ACPI Error: Method parse/execution failed \_TZ.FN02._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.276481] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.276487] ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.288527] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.288533] ACPI Error: Method parse/execution failed \_TZ.FN03._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.300554] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.300560] ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.312553] ACPI Error: Method parse/execution failed \_TZ.FNCL, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.312559] ACPI Error: Method parse/execution failed \_TZ.FN04._ON, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.315025] ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.315159] ACPI Error: Method parse/execution failed \_TZ.TZ00._TMP, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.315218] ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    1.315271] ACPI Error: Method parse/execution failed \_TZ.TZ01._TMP, AE_NOT_FOUND (20181213/psparse-531)&#xA;[    4.419092] EXT4-fs (nvme0n1p6): re-mounted. Opts: errors=remount-ro&#xA;[    4.649599] nvidia: module verification failed: signature and/or required key missing - tainting kernel&#xA;[    4.931337] thermal thermal_zone10: failed to read out thermal zone (-61)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Also I recently installed some new NVIDIA drivers as recommended by the Elementary App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also not sure if this applies, but UEFI boots Windows and Legacy BIOS boots Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw some posted questions similar to mine but none with an answer. Any help is appreciated! Thanks!&lt;/p&gt;&#xA;" OwnerUserId="19891" LastEditorUserId="19891" LastEditDate="2019-12-17T16:30:25.143" LastActivityDate="2020-11-22T04:22:31.313" Title="htop shows Ubuntu has up to 1.3GB of RAM even though PC has 32GB RAM; dual boot Win10 &amp; Elementary OS" Tags="|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21676" PostTypeId="2" ParentId="21671" CreationDate="2019-12-17T10:21:37.003" Score="0" Body="&lt;p&gt;Wired will be turned off until you connect some network cable, or USB with a phone with thetering mode enabled.  If there is no wired network connected the &quot;Advanced settings&quot; will be disabled also because it is &lt;strong&gt;only&lt;/strong&gt; for wired networks, so unless you have connected a network cable(or usb thetering device) they will remain disabled. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you open the Network Properties box the first cathegory selected (look at the Devices list on left) is the Wired. Below Wired  should be a Wireless option, select it and you will see the available wi-fi networks. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-17T10:21:37.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21677" PostTypeId="2" ParentId="21658" CreationDate="2019-12-17T14:26:58.423" Score="0" Body="&lt;p&gt;This isn't the sort of problem you fix yourself. You need to report this to the WebKit developers to solve.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, make sure that you're using the latest version of WebKitGTK, 2.26.2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, report a bug on WebKit Bugzilla. Select the Media component, prefix the title of the bug with [GStreamer], and CC bugs-noreply@webkitgtk.org. In your bug report, mention the version of WebKitGTK that you're using, and your GStreamer version. Include the screenshot you posted here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally, navigate to webkit://gpu and paste all that information into the bug report. The output you copy/paste will be messy; take the time to add blank lines to make it easier to read.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lastly, see if you have gstreamer1.0-vaapi installed. If so, uninstall it and check if that makes a difference.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2019-12-17T14:26:58.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21678" PostTypeId="2" ParentId="21674" CreationDate="2019-12-17T14:48:25.330" Score="0" Body="&lt;p&gt;As I see your stats from &lt;code&gt;dmidecode --type memory&lt;/code&gt; it shows that the Maximum Capacity is 32G, but only one Memory Device is detected with capacity of 16384 MB. It is still much more than 1.3G, but the execution of the same command on my machine with 24GB of RAM returns also &lt;strong&gt;Maximum Capacity&lt;/strong&gt; of 32GB, but two &lt;strong&gt;Memrory Device&lt;/strong&gt;s - with &lt;strong&gt;Size:&lt;/strong&gt; 16384 MB and 8192 MB. Also I have a clear status for &lt;strong&gt;Error Information Handle: No Error&lt;/strong&gt;. It looks like there is some problem the way Linux detects your RAM. I recommend you to boot into Windows, check the RAM statistics there, and if they are different - you better boot the computer from the elementary Live USB and do a Memory Test. I am not familliar with Dell computers, but if the computer has hardware diagnostics - you better check the RAM from there first. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-17T14:48:25.330" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21679" PostTypeId="1" CreationDate="2019-12-17T18:14:41.150" Score="1" ViewCount="364" Body="&lt;p&gt;Here's my setup:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell precision 5540&lt;/li&gt;&#xA;&lt;li&gt;elementary OS Hera (up to date as of 12/17)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;In order to have a macOS like experience I installed lib gesture to switch workspace using a 3-finger gesture.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, it seems to have some weird 2-finger behavior that switches the workspace on a very slight horizontal 2-finger gesture; 2 fingers are to scroll a window content and not switch workspaces.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I disabled lib gesture to test if it was the culprit but no. It's seems to be managed by the OS. If I disable scrolling in &lt;strong&gt;System Settings&lt;/strong&gt; → &lt;strong&gt;Mouse &amp;amp; Touchpad&lt;/strong&gt; → &lt;strong&gt;Touchpad&lt;/strong&gt;, this gesture is disabled. I only want to scroll window content using 2 fingers, not workspaces.&lt;/p&gt;&#xA;" OwnerUserId="19894" LastEditorUserId="308" LastEditDate="2019-12-19T19:26:34.913" LastActivityDate="2020-05-06T12:11:23.323" Title="How can I disable workspace switching with 2 fingers on touchpad after installing libgesture?" Tags="|touchpad|workspace|gesture|" AnswerCount="2" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="21680" PostTypeId="2" ParentId="21590" CreationDate="2019-12-17T18:29:40.003" Score="0" Body="&lt;p&gt;Try booting into TTY (virtual terminal) and enter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;killall chrome&lt;br&gt;&#xA;Though you might need to use 'chromium' instead (I use firefox and it works for me)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This might keep you from having to reboot each time, just restart Chrome.&lt;/p&gt;&#xA;" OwnerUserId="12" LastEditorUserId="12" LastEditDate="2019-12-18T08:02:22.477" LastActivityDate="2019-12-18T08:02:22.477" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21681" PostTypeId="2" ParentId="21590" CreationDate="2019-12-17T19:28:32.127" Score="0" Body="&lt;p&gt;This is kind of a long shot guess but I used the application from the app center called Monitor and had issues with it locking my system on both my Macbook Pro and Huawei laptops. If you happen to be using it then I would suggest uninstalling it and see if the issue goes away.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-17T19:28:32.127" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21683" PostTypeId="1" CreationDate="2019-12-18T06:33:33.350" Score="0" ViewCount="1921" Body="&lt;p&gt;I just got a new computer (HP Envy) and installed elementary OS.&#xA;As you may know, a lot of HP laptops come with Intel wireless drivers and they do not work on Linux right after the installation. And mine is not an exception. I do not see wireless option in the network setting. Right now, I am connected to internet by USB tethering using my phone. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My wireless driver is &lt;strong&gt;Intel Wireless AC9560&lt;/strong&gt;. I have tried many different methods online but failed. Could anyone help me get my wifi working?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;p.s. I also could not install elementary tweaks on my computer. While adding the PPA, it always returned &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:10 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release&#xA;404  Not Found [IP: 91.189.95.83 80]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19890" LastEditorUserId="308" LastEditDate="2019-12-19T00:58:44.040" LastActivityDate="2020-08-18T09:34:21.750" Title="Wireless driver installation" Tags="|wifi|drivers|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21684" PostTypeId="2" ParentId="19701" CreationDate="2019-12-18T07:39:11.530" Score="1" Body="&lt;p&gt;I have the same issue. The parental control does not do anything.&#xA;My current workaround is to use &lt;a href=&quot;https://help.ubuntu.com/community/UFW&quot; rel=&quot;nofollow noreferrer&quot;&gt;ufw&lt;/a&gt;. For my son, I wanted him to only be able to get and send email on his own, hence I allowed only outgoing connections to the smtp (587) and imap (993) ports of his email account, as well as to dns (port 53):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw default deny outgoing&#xA;sudo ufw default deny incoming &#xA;sudo ufw allow out 53 &#xA;sudo ufw allow out 587 &#xA;sudo ufw allow out 993&#xA;sudo ufw enable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To turn off the restrictions, I disable ufw with &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw disable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Not very convenient, but works for me..&lt;/p&gt;&#xA;" OwnerUserId="19897" LastActivityDate="2019-12-18T07:39:11.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21685" PostTypeId="2" ParentId="21683" CreationDate="2019-12-18T08:20:04.707" Score="2" Body="&lt;p&gt;Found a bunch of issues related to your wifi adapter and Ubuntu 18.04, but these two seem promising:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2432901&amp;amp;p=13915811#post13915811&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu not recognizing wifi device&lt;/a&gt;  describes how to install the latest intel wifi drivers:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&#xA; sudo add-apt-repository ppa:canonical-hwe-team/backport-iwlwifi&#xA; sudo apt-get update&#xA; sudo apt-get install backport-iwlwifi-dkms&#xA;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1196308/wifi-adapter-not-found-ubuntu-18-04&quot;&gt;WiFi Adapter Not Found: Ubuntu 18.04&lt;/a&gt; suggest a kernel upgrade to 5.3:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;sudo apt install linux-generic-hwe-18.04-edge&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-18T08:20:04.707" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21686" PostTypeId="1" CreationDate="2019-12-18T08:21:20.873" Score="3" ViewCount="1317" Body="&lt;p&gt;On macOS the locations of windows, running apps, and current working directory for each tab of Terminal (not to mention the terminal size and colors) is saved and restored across reboots. It looks like GNOME supports some of this behavior. How can I do this with Pantheon in elementary OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is window name and location stored in a file somewhere which could be used to restore later?&lt;/p&gt;&#xA;" OwnerUserId="19832" LastEditorUserId="308" LastEditDate="2019-12-19T01:07:32.273" LastActivityDate="2020-05-03T13:59:48.893" Title="How can I save the state of open windows when I reboot?" Tags="|pantheon|session|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21687" PostTypeId="1" CreationDate="2019-12-18T09:05:46.463" Score="0" ViewCount="177" Body="&lt;p&gt;On a new install of elementary OS on a laptop, at the login screen, the keyboard does not work. After clicking around randomly, eventually I am able to type. If I plug in an external USB keyboard, then it also works (both the external keyboard and the laptop keyboard). Is there any key combination that could help debug why key input doesn't appear in the password field until something is triggered?&lt;/p&gt;&#xA;" OwnerUserId="19832" LastEditorUserId="308" LastEditDate="2019-12-19T19:23:32.733" LastActivityDate="2019-12-19T19:23:32.733" Title="Keyboard doesn't work immediately at login screen" Tags="|greeter|keyboard|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21688" PostTypeId="2" ParentId="21590" CreationDate="2019-12-18T10:05:57.710" Score="1" Body="&lt;p&gt;If you can't get any response and are forced to reboot, then after the system comes back up, you can look at various log files in /var/log such as /var/log/syslog and scroll up to the time before you rebooted and look for any events that could indicate a problem causing the freeze.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Besides syslog in /var/log there's kernlog and Xorg.0.log which may offer up clues.&lt;/p&gt;&#xA;" OwnerUserId="19832" LastActivityDate="2019-12-18T10:05:57.710" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21689" PostTypeId="2" ParentId="21686" CreationDate="2019-12-18T13:33:56.270" Score="1" Body="&lt;p&gt;Pantheon will remember the last size, monitor (for multiple monitor set ups) and location that application windows were closed on/at. So if you close each application in the location you want it prior to rebooting when you reopen the applications they should be in the same location. This does not happen if you reboot without first closing the windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried setting org/gnome/gnome-session/auto-save-session with dconf editor but did not have any luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do enjoy this feature in mac OS however I have found the above behavior to be adequate for my needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am interested to see if anyone else can provide a solution.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-18T13:33:56.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21690" PostTypeId="1" CreationDate="2019-12-18T14:06:59.083" Score="0" ViewCount="238" Body="&lt;p&gt;Afaik, this exact issue is not answered here and I am too much of a noob to really follow this one: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3353/installing-elementary-os-alongside-windows-10&quot;&gt;Installing elementary OS alongside Windows 10&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So to my problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it comes to choose the type of installation it says that I have installed Win 10 and how do I want to proceed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it DOES NOT give me the option to install it alongside Win 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The first option I have is to erase all and to install elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I can enable the two tick boxes below (Encrypt and use LVM)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then there comes the separation line and under that I can choose something different.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In all tutorial videos that i could find there is always a first option that says something like: &quot; Install alongside existing OS&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use an Acer TravelMate 5720 and Win 10 Pro 32 Bit. It´s fully registered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you all very much in advance for your ideas! &lt;/p&gt;&#xA;" OwnerUserId="19900" LastEditorUserId="16827" LastEditDate="2019-12-19T06:49:53.813" LastActivityDate="2024-01-02T09:08:10.990" Title="Installing Hera parallel to Win 10" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21691" PostTypeId="1" CreationDate="2019-12-18T15:39:55.690" Score="0" ViewCount="360" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;'Unable to Log In&lt;br&gt;&#xA;  Starting the sessions has failed.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Erro -&gt; Session returned -&gt; error code 1'&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Using gdm3 I can log in normally, with Lightdm that Elementary uses I can't log in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already reinstalled the elementary desktop and the error persists, has anyone gone through it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gmSz7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gmSz7.jpg&quot; alt=&quot;https://i.stack.imgur.com/gmSz7.jpg&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19901" LastEditorUserId="16827" LastEditDate="2019-12-19T06:51:19.570" LastActivityDate="2024-02-29T09:00:40.113" Title="Error logging in Lightdm - Hera 5.1" Tags="|greeter|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21692" PostTypeId="1" CreationDate="2019-12-18T21:34:12.943" Score="2" ViewCount="283" Body="&lt;p&gt;So I downloaded spotify through snap and the client works fine except it doesn't have any option to scale to my 3000x2000 display on my surface book. I saw a post that fixes the issue &lt;a href=&quot;https://community.spotify.com/t5/Desktop-Linux/Linux-Ubuntu-Scaling-Issue/td-p/4524721&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The thing im worried about is that I get this response from my terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;2019/12/18 16:18:56.427654 cmd_run.go:884: WARNING: cannot create user data directory: failed to verify SELinux context of /home/l3ruce/snap: exec: &quot;matchpathcon&quot;: executable file not found in $PATH&#xA;Gtk-Message: Failed to load module &quot;pantheon-filechooser-module&quot;&#xA;Gtk-Message: Failed to load module &quot;gail&quot;&#xA;Gtk-Message: Failed to load module &quot;atk-bridge&quot;&#xA;Gtk-Message: Failed to load module &quot;canberra-gtk-module&quot;&#xA;[1218/161856.864264:ERROR:buffer_manager.cc(488)] [.DisplayCompositor]GL ERROR :GL_INVALID_OPERATION : glBufferData: &amp;lt;- error from previous GL command&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This does work however I can not use the terminal unless I open a different tab and if I close that tab or the terminal itself then spotify closes. I just want to be sure that it is ok to run this command every time I launch spotify or if there is a better way.&lt;/p&gt;&#xA;" OwnerUserId="19856" LastEditorUserId="308" LastEditDate="2019-12-19T19:03:12.827" LastActivityDate="2019-12-19T19:03:12.827" Title="How can I get Spotify to scale properly on HiDPI?" Tags="|release-hera|hidpi|camera|surface-tablet|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21693" PostTypeId="2" ParentId="21691" CreationDate="2019-12-18T23:29:59.203" Score="0" Body="&lt;p&gt;The error, I suppose, sits in Ubunta and there is no solution or no one knows how to fix it. I sit with the same trouble.&lt;/p&gt;&#xA;" OwnerUserId="19805" LastActivityDate="2019-12-18T23:29:59.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21695" PostTypeId="1" CreationDate="2019-12-19T07:42:34.053" Score="0" ViewCount="507" Body="&lt;p&gt;&lt;strong&gt;My system spec&#xA;output of neofetch command&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OS: elementary OS 5.1 Hera x86_64 &#xA;Host: H310M S2 2.0&#xA;Kernel: 5.0.0-37-generic &#xA;Uptime: 34 mins &#xA;Packages: 1836 &#xA;Shell: bash 4.4.20 &#xA;Resolution: 1024x768 &#xA;DE: Pantheon &#xA;WM: Mutter(Gala) &#xA;Theme: Elementary [GTK3] &#xA;Icons: Elementary [GTK3] &#xA;Terminal: io.elementary.t &#xA;CPU: Intel i5-9400F (6) @ 4.100GHz &#xA;GPU: NVIDIA GeForce GT 1030 &#xA;Memory: 1230MiB / 7921MiB &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;BIOS Settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Fastboot off&#xA;secure boot off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have a running elementary OS 5.1(&lt;a href=&quot;/questions/tagged/hera&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;hera&amp;#39;&quot; rel=&quot;tag&quot;&gt;hera&lt;/a&gt;) system which is fine. Installed using bootable USB using rufus.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to have a test elementary OS wherein I can do trials before doing it in working system.&lt;br&gt;&#xA;I usually do this by booting into ISO live system, do the testing and if comfortable implement it in working system.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My grub entry in 40_custom&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;menuentry &quot;Elementary OS 5.1 Hera ISO&quot; {&#xA;        set root='(hd1,13)'&#xA;        set isofile='/anivaarya-linux-distros/ele5.1/elementaryos-5.1-stable.20191202.iso'&#xA;        search --no-floppy --fs-uuid --set=root f3db7e9a-1e71-4493-b26c-4b092a1e172e&#xA;        loopback loop $isofile&#xA;        linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile quiet splash threadirqs noprompt noeject  pci=nomsi,noaer &#xA;        initrd (loop)/casper/initrd.lz&#xA;}&#xA;&#xA;menuentry &quot;Ubuntu 19.10 ISO&quot; {&#xA;        set root='(hd1,13)'&#xA;        set isofile='/anivaarya-linux-distros/ubuntu1910/ubuntu-19.10-desktop-amd64.iso'&#xA;        search --no-floppy --fs-uuid --set=root f3db7e9a-1e71-4493-b26c-4b092a1e172e&#xA;        loopback loop $isofile&#xA;        linux (loop)/casper/vmlinuz boot=casper file=/cdrom/preseed/ubuntu.seed iso-scan/filename=$isofile quiet splash threadirqs noprompt noeject pci=nomsi noaer &#xA;        initrd (loop)/casper/initrd&#xA;}&#xA;&#xA;menuentry &quot;Zorin 15 Core ISO&quot; {&#xA;        set root='(hd1,13)'&#xA;        set isofile='/anivaarya-linux-distros/zorin15/Zorin-OS-15-Core-64-bit-r1.iso'&#xA;        search --no-floppy --fs-uuid --set=root f3db7e9a-1e71-4493-b26c-4b092a1e172e&#xA;        loopback loop $isofile&#xA;        linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile quiet splash threadirqs noprompt noeject pci=nomsi,noaer nvidia-zorin &#xA;        initrd (loop)/casper/initrd.lz4&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I added ubuntu 1910 and Zorin OS 15 because I am able to boot to them. But elementary OS 5.1 never boots and goes to busybox shell (initramfs) prompt with the message&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Unable to find a medium containing a live file system&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Please note that I have verified the iso for shasum and it is ok.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also please note that I can boot into elementary OS hera using usb (rufus created) with no problems. Thats how I was able to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another important point is I am able to boot into elementary OS juno iso with same kind of grub entry with the iso name changed and able to boot into it.&lt;br&gt;&#xA;So I can come to a conclusion that My bios and grub parameters are ok for elementary OS juno and not for elementary OS hera.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wish to know whether there are any changes to hera w.r.t iso booting using grub or am I doing anything wrong?  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help will be highly appreciated.  &lt;/p&gt;&#xA;" OwnerUserId="19906" LastEditorUserId="19906" LastEditDate="2019-12-20T15:14:13.267" LastActivityDate="2020-01-10T15:08:43.860" Title="Can not boot into hera live iso, grub entry fails" Tags="|boot|release-hera|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21696" PostTypeId="1" CreationDate="2019-12-19T10:19:22.383" Score="1" ViewCount="118" Body="&lt;p&gt;I have an NVIDIA GTX 1050 TI GPU on my elementary OS. I once tried an OS update via AppCenter. Then reboot it. Then my NVIDIA driver isn't working properly. So I have to reinstall the NVIDIA driver again. I use the NVIDIA driver from &lt;a href=&quot;https://www.nvidia.com/Download/driverResults.aspx/156086/en-us&quot; rel=&quot;nofollow noreferrer&quot;&gt;the NVIDIA site&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't use a special driver from AppCenter because there is a problem with my Autodesk Maya application. But with this driver, there are no problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, how so that when I update this OS, my NVIDIA driver is not interrupted?&lt;/p&gt;&#xA;" OwnerUserId="19908" LastEditorUserId="308" LastEditDate="2019-12-19T18:46:56.407" LastActivityDate="2019-12-20T05:07:11.033" Title="How can I update elementary OS without interrupting NVIDIA driver?" Tags="|updates|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21697" PostTypeId="1" CreationDate="2019-12-19T11:00:59.477" Score="0" ViewCount="711" Body="&lt;p&gt;Error details:&lt;a href=&quot;https://i.stack.imgur.com/X6PZi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X6PZi.png&quot; alt=&quot;h &quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;: The repository 'http://ppa.launchpad.net/cybre/elementaryplus/ubuntu bionic Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19909" LastEditorUserId="308" LastEditDate="2019-12-19T18:45:10.617" LastActivityDate="2019-12-19T18:45:10.617" Title="Failed to Fetch Updates on elemetary OS 5.1 Hera" Tags="|release-hera|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21698" PostTypeId="2" ParentId="21674" CreationDate="2019-12-19T11:44:12.173" Score="0" Body="&lt;p&gt;I was able to fix my problem two nights back. I was so swamped trying to catch up with work that I wasn't able to post the answer till now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The biggest problem turned out to be my live-bootable USB was not made to be UEFI-compatible. I recreated it using Rufus using this setup:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ioujc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ioujc.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This next part I remember a bit vaguely so I hope it helps rather than confuses.  I rebooted the latop and held F12 (when the Dell logo showed up) to see boot options and I &lt;em&gt;think&lt;/em&gt; the USB was not there. I then went into the BIOS Setup, went to General &gt;&gt; Boot Sequence and clicked &quot;Add Boot Option&quot;.  Then I clicked the browse button ('...') next to File Name and found my way to a file named &quot;grubx64.efi&quot;. I remembered reading somewhere that &quot;GRUB&quot; was the bootloader to use for Linux instead of &quot;Windows Boot Manager&quot;, so I selected that file. I named the boot option &quot;GRUB&quot;. Now upon restart (with F12 at the Dell logo) I saw &quot;GRUB&quot; as a boot option. I selected that and Elementary ran off the USB as expected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason I even thought to add a Boot option was because of this Dell link, although the link mentions using &quot;SHIMx64.EFI&quot; rather than &quot;grubx64.efi&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.dell.com/support/article/us/en/04/sln297060/xps-13-9343-how-to-install-ubuntu-developer-edition-14-04-on-a-dell-pc-configured-for-the-unified-extensible-firmware-interface-uefi-bios?lang=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dell.com/support/article/us/en/04/sln297060/xps-13-9343-how-to-install-ubuntu-developer-edition-14-04-on-a-dell-pc-configured-for-the-unified-extensible-firmware-interface-uefi-bios?lang=en&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once Elementary was running off the USB the first thing I did was launch a terminal and ran &quot;htop&quot;.  VOILA!!!!  Over 31GB of RAM available!!!!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went ahead and reinstalled Elementary on my preconfigured partitions as per the normal instructions. Now when I reboot with F12 I see a new boot option called &quot;ubuntu&quot; at the top of my Boot Sequence. My &quot;GRUB&quot; boot option is still there below. When I drill into the &quot;ubuntu&quot; boot option (in BIOS setup) I see that it is indeed pointing to &quot;SHIMx64.EFI&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS now runs SCREAMING awesome!!!&lt;/p&gt;&#xA;" OwnerUserId="19891" LastActivityDate="2019-12-19T11:44:12.173" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21699" PostTypeId="2" ParentId="21697" CreationDate="2019-12-19T13:01:47.253" Score="1" Body="&lt;p&gt;That repository was not updated for a very long time. As the error says, there are no packages available for Ubuntu bionic (elementary OS 5.1 is built on it) in that repository:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/v13AH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/v13AH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One valid way to get those icons is to clone the GitHub repository &lt;a href=&quot;https://github.com/mank319/elementaryPlus&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementaryPlus&lt;/a&gt; and use the install.sh script to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use &lt;code&gt;sudo add-apt-repository --remove ppa:cybre/elementaryplus&lt;/code&gt; to remove the obsolete repository.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-19T13:01:47.253" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21700" PostTypeId="1" CreationDate="2019-12-19T17:48:46.270" Score="2" ViewCount="1433" Body="&lt;p&gt;I installed a site as a web application in Epiphany (in the upper right gear icon) as a shortcut that I could then keep in my dock. However, the site is just a rendered static page with no clickable links (iCloud site, so probably a security feature, as other &quot;shortcut&quot; sites are active/working).  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I need to know is how to UNINSTALL this shortcut. I've removed it from dock and right-clicked the app I saved, but there is no uninstall option. There's no &quot;drag to recycle/trash&quot; option either. I've looked in all sub-folders and the shortcut isn't listed. I just want to remove it. I'd like a way to remove it from desktop/apps folder without going into Terminal but happily will. Thank you. &lt;/p&gt;&#xA;" OwnerUserId="19915" LastEditorUserId="308" LastEditDate="2019-12-19T18:43:58.593" LastActivityDate="2020-03-26T10:22:11.787" Title="How can I uninstall a site that was installed as a Web Application?" Tags="|epiphany|apps|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21701" PostTypeId="2" ParentId="21700" CreationDate="2019-12-19T18:38:50.813" Score="3" Body="&lt;p&gt;It’s a bit hidden, but you can remove added web apps in Epiphany itself. In the location entry at the top, type &lt;code&gt;about:applications&lt;/code&gt; and hit &lt;kbd&gt;Enter&lt;/kbd&gt;. You should see a screen like this. Find the installed web app you'd like to remove, and hit its &lt;strong&gt;Delete&lt;/strong&gt; button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qOXO6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qOXO6.png&quot; alt=&quot;Installed web applications in Epiphany&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;We've reported &lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/issues/958&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue upstream in Epiphany itself&lt;/a&gt; to hopefully make this process more discoverable.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T18:38:50.813" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21702" PostTypeId="2" ParentId="21700" CreationDate="2019-12-19T18:41:20.623" Score="0" Body="&lt;p&gt;There's no intuitive way of removing these shortcuts, unfortunately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now the easiest method is to use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt; to remove the shortcut and  manually removing the app by deleting the associated &lt;code&gt;app-epiphany[...]&lt;/code&gt; folder from &lt;code&gt;~/.config/epiphany&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you didn't want to use AppEditor you should be able to delete the &lt;code&gt;.desktop&lt;/code&gt; file from &lt;code&gt;~/.local/share/applications&lt;/code&gt; for the same effect. It just might be nicer to have the visual option (or easily hide it to be restored later if need be).&lt;/p&gt;&#xA;" OwnerUserId="18594" LastActivityDate="2019-12-19T18:41:20.623" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21703" PostTypeId="1" CreationDate="2019-12-19T18:44:55.380" Score="2" ViewCount="6534" Body="&lt;p&gt;I am using elementary OS 5.1 Hera. If I install some AppImage file in my home directory, I don't find its app icon in the Applications Menu.&lt;/p&gt;&#xA;" OwnerUserId="19917" LastEditorUserId="308" LastEditDate="2019-12-19T19:02:13.190" LastActivityDate="2019-12-20T06:40:19.890" Title="How can I get AppImages to show up in the Applications Menu?" Tags="|applications|release-hera|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21704" PostTypeId="2" ParentId="21692" CreationDate="2019-12-19T18:52:26.990" Score="1" Body="&lt;p&gt;I've not used the Snap version of Spotify, but I just installed the &lt;a href=&quot;https://flathub.org/apps/details/com.spotify.Client&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatpak version from Flathub&lt;/a&gt; and it works with scaling out of the box. That should be much easier than trying to manually edit config files!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install Spotify from Flatpak:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Visit the &lt;a href=&quot;https://flathub.org/apps/details/com.spotify.Client&quot; rel=&quot;nofollow noreferrer&quot;&gt;Spotify page on Flathub&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the &lt;strong&gt;Install&lt;/strong&gt; button on the web page&lt;/li&gt;&#xA;&lt;li&gt;Depending on your browser, Sideload may open automatically. If not, choose to open the downloaded file with &lt;strong&gt;Sideload&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Read and agree to the implications of installing an untrusted app from Flatpak.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If this is the first Flatpak app you've installed, it might not show up in the Applications Menu until you log out and back in—future Flatpak apps will show up instantly. You can then uninstall the snap version from the Terminal using &lt;code&gt;snap remove spotify&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's typically recommended to use Flatpak apps on elementary OS instead of snap or .deb, because elementary has &lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;officially backed Flatpak&lt;/a&gt;, elementary OS supports Flatpak out of the box, and elementary developers have put &lt;a href=&quot;https://blog.elementary.io/updates-for-october-2019/&quot; rel=&quot;nofollow noreferrer&quot;&gt;significant work into&lt;/a&gt; making sure it's easy to install and update Flatpak apps without having to use a Terminal.&lt;/p&gt;&#xA;" OwnerUserId="308" LastEditorUserId="308" LastEditDate="2019-12-19T18:57:47.200" LastActivityDate="2019-12-19T18:57:47.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21705" PostTypeId="2" ParentId="21703" CreationDate="2019-12-19T19:06:36.117" Score="4" Body="&lt;p&gt;AppImages don't automatically add .desktop files to the appropriate FreeDesktop standard place needed to show up in the Applications Menu. There is &lt;a href=&quot;https://github.com/AppImage/AppImageKit&quot; rel=&quot;nofollow noreferrer&quot;&gt;a daemon you can install&lt;/a&gt; to automatically manage AppImage .desktop launchers, but I don't have experience with that directly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have the choice, it's typically recommended to use Flatpak apps on elementary OS instead of AppImage because elementary has &lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;officially backed Flatpak&lt;/a&gt;, elementary OS supports Flatpak out of the box, and elementary developers have put &lt;a href=&quot;https://blog.elementary.io/updates-for-october-2019/&quot; rel=&quot;nofollow noreferrer&quot;&gt;significant work into&lt;/a&gt; making sure it's easy to install and update Flatpak apps throughout the OS.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T19:06:36.117" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21706" PostTypeId="2" ParentId="16610" CreationDate="2019-12-19T19:20:28.603" Score="0" Body="&lt;p&gt;There was &lt;a href=&quot;https://github.com/elementary/terminal/issues/400&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue in Terminal&lt;/a&gt; that prevented it from working properly with the system-wide setting. That has since been resolved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you should be able to head to &lt;strong&gt;System Settings&lt;/strong&gt; → &lt;strong&gt;Mouse &amp;amp; Touchpad&lt;/strong&gt; → &lt;strong&gt;Clicking&lt;/strong&gt; and toggle the &lt;strong&gt;Middle-click paste&lt;/strong&gt; option for it to work system-wide.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T19:20:28.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21707" PostTypeId="2" ParentId="21260" CreationDate="2019-12-19T19:22:30.693" Score="0" Body="&lt;p&gt;If I'm understanding this correctly, you'd like to be able to set the timezone? You can set the timezone from &lt;strong&gt;System Settings&lt;/strong&gt; → &lt;strong&gt;Date &amp;amp; Time&lt;/strong&gt; → &lt;strong&gt;Time Zone&lt;/strong&gt;. Choosing a timezone there will set the correct offset from UTC.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T19:22:30.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21708" PostTypeId="2" ParentId="21665" CreationDate="2019-12-19T19:39:53.017" Score="0" Body="&lt;p&gt;Go to the AppCenter and install AppEditor&#xA;&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can configure the App Icons for each app.&#xA;So just select the calendar icon for the Calendar app.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Idk why you face such problems though, maybe it's releated to the language you use.&lt;/p&gt;&#xA;" OwnerUserId="19918" LastActivityDate="2019-12-19T19:39:53.017" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21709" PostTypeId="2" ParentId="21665" CreationDate="2019-12-19T19:48:33.247" Score="0" Body="&lt;p&gt;It looks like this is &lt;a href=&quot;https://github.com/elementary/calendar/issues/477&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue in Calendar&lt;/a&gt;. I've filed an issue on GitHub; you can give that a ️ reaction to show you're affected, and you can use the &lt;strong&gt;Subscribe&lt;/strong&gt; feature on GitHub to get a notification when there's an update.&lt;/p&gt;&#xA;" OwnerUserId="308" LastEditorUserId="308" LastEditDate="2019-12-19T19:57:56.343" LastActivityDate="2019-12-19T19:57:56.343" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21710" PostTypeId="2" ParentId="21657" CreationDate="2019-12-19T20:01:32.457" Score="1" Body="&lt;p&gt;elementary OS does not currently support that as a feature. I've filed &lt;a href=&quot;https://github.com/elementary/gala/issues/668&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue on GitHub&lt;/a&gt; to track the request, though!&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T20:01:32.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21711" PostTypeId="2" ParentId="19202" CreationDate="2019-12-19T20:11:59.890" Score="1" Body="&lt;p&gt;I've heard of similar issues with Snap apps off and on. One easy alternative is to use Flatpak apps from Flathub when apps exist in both places.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To install an app from Flathub:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Visit the app's page on &lt;a href=&quot;https://flathub.org/apps&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the &lt;strong&gt;Install&lt;/strong&gt; button on the web page&lt;/li&gt;&#xA;&lt;li&gt;Depending on your browser, Sideload may open automatically. If not, choose to open the downloaded file with &lt;strong&gt;Sideload&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Read and agree to the implications of installing an untrusted app from Flatpak.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If this is the first Flatpak app you've installed, it might not show up in the Applications Menu until you log out and back in—future Flatpak apps will show up instantly. You can then uninstall the snap version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's typically recommended to use Flatpak apps on elementary OS instead of snap because elementary has &lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;officially backed Flatpak&lt;/a&gt;, elementary OS supports Flatpak out of the box, and elementary developers have put &lt;a href=&quot;https://blog.elementary.io/updates-for-october-2019/&quot; rel=&quot;nofollow noreferrer&quot;&gt;significant work into&lt;/a&gt; making sure it's easy to install and update Flatpak apps without having to use a Terminal.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2019-12-19T20:11:59.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21712" PostTypeId="2" ParentId="21703" CreationDate="2019-12-19T21:44:18.677" Score="7" Body="&lt;p&gt;AppImages are not automatically integrated in elementary. I faced the same problem for an application I needed. (I second the suggestion from &lt;a href=&quot;https://elementaryos.stackexchange.com/users/308/cassidy-james-blaede&quot;&gt;@cassidy-james-blaede&lt;/a&gt;, use Flatpak if possible, in my case it wasn't)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Fortunately the AppImage documentation has some nice information about integrating them with &lt;a href=&quot;https://docs.appimage.org/user-guide/run-appimages.html#integrating-appimages-into-the-desktop&quot; rel=&quot;noreferrer&quot;&gt;Desktop Environment&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are two available solutions:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/AppImage/appimaged&quot; rel=&quot;noreferrer&quot;&gt;appimaged&lt;/a&gt;: is a daemon that monitors the system and integrates AppImages&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher&quot; rel=&quot;noreferrer&quot;&gt;AppImageLauncher&lt;/a&gt;:  is a helper application for Linux distributions serving as a kind of “entry point” for running and integrating AppImages&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;appimaged&lt;/code&gt; can be installed by downloading the AppImage from the GitHub Release page and installing it from command line. I would say this solution is not the preferred one, you can find detailed instructions &lt;a href=&quot;https://github.com/AppImage/appimaged#install&quot; rel=&quot;noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The suggested solution (by me, I think is the easiest) is to install &lt;code&gt;AppImageLauncher&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download the &lt;code&gt;.deb&lt;/code&gt; from the &lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher/releases&quot; rel=&quot;noreferrer&quot;&gt;GitHub Release&lt;/a&gt; page&lt;/li&gt;&#xA;&lt;li&gt;Install it either:&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;from terminal, with &lt;code&gt;$ sudo dpkg -i {name}.deb&lt;/code&gt; from the directory you have downloaded the file into&lt;/li&gt;&#xA;&lt;li&gt;using a GUI tool like &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;noreferrer&quot;&gt;Eddy&lt;/a&gt; (you can install it from AppCenter)&lt;/li&gt;&#xA;&lt;/ol&gt;&lt;/li&gt;&#xA;&lt;li&gt;You can now double click on &lt;code&gt;.AppImage&lt;/code&gt; files and have them integrated in the system&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19056" LastActivityDate="2019-12-19T21:44:18.677" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21714" PostTypeId="2" ParentId="21703" CreationDate="2019-12-20T00:57:50.923" Score="2" Body="&lt;p&gt;Great answers. Another way to create desktop entries is by using the AppEditor ( &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor/&lt;/a&gt; ).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works for appimages and any other type of application.&lt;/p&gt;&#xA;" OwnerUserId="2461" LastActivityDate="2019-12-20T00:57:50.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21715" PostTypeId="1" AcceptedAnswerId="21717" CreationDate="2019-12-20T01:11:53.547" Score="1" ViewCount="78" Body="&lt;p&gt;I just became a linux user for a about a 4 weeks now I started with POP OS but didn't really like it. until I installed elementary OS pretty much like how it looks! and enjoying it atm, but! when I installed steam... well steam works fine but I could not use my HDD to connect to my steam library! it automatically picks the contents of my SSD! I need help integrating my HDD to my system so steam can find the drive and install games from there instead of my SSD. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you guys in advance!&#xA;you new linux user&#xA;Nox The Lazyist&lt;/p&gt;&#xA;" OwnerUserId="19928" LastActivityDate="2019-12-20T04:50:00.470" Title="Using HDD as steam backup" Tags="|system-installation|steam|hdd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21717" PostTypeId="2" ParentId="21715" CreationDate="2019-12-20T04:50:00.470" Score="0" Body="&lt;p&gt;I'm assuming a few things here:&#xA;1) You have a non-EXT4 formatted HDD (FAT, NTFS, etc). Right?&#xA;2) The drive is a SATA-connected one not a USB removable one. Right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if so, then &lt;a href=&quot;https://askubuntu.com/questions/164926/how-to-make-partitions-mount-at-startup&quot;&gt;THIS link&lt;/a&gt; should tell you how to auto-mount a drive on boot, and then you'll have to go to your Steam Options and make that mount point (i.e.: /media/myHDD) the default steam library path (From Steam, click on the Steam Menu, Settings, Downloads, click on the &quot; STEAM Library Folders&quot; button, and set your path and default from there).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&#xA;-Aldo&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: The &quot;GUI&quot; option on the linked article, is super simple and GNOME Disks works perfectly with elementary :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-20T04:50:00.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21718" PostTypeId="2" ParentId="21679" CreationDate="2019-12-20T04:55:18.120" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mHz0z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mHz0z.png&quot; alt=&quot;libinput conf&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please see my screenshot:&#xA;That's how I have my gestures configured in order to swipe workspaces with 4 fingers and do some minimize with three. Also three finger Back/Fwd for the browser navigation :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-20T04:55:18.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21719" PostTypeId="2" ParentId="21696" CreationDate="2019-12-20T05:01:53.403" Score="1" Body="&lt;p&gt;I use a Dell XPS 15 9560 with Integrated intel + GTX 1050. I've learn not to mess with other NVIDIA driver rather than what appears available in AppCenter. My recommendation to you would be the following:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1) Uninstall any NVIDIA thingy you might have in your system.&lt;bR&gt;&#xA;2) Completely update elementaryOS to the latest.&lt;bR&gt;&#xA;3) Check which Kernel version you're running (doing 'uname -r' from a terminal does the trick).&lt;bR&gt;&#xA;-At this point make sure you're running the latest curated kernel for eOS which is 5.xxxx (I run a custom 5.3.13 like a charm but let's do this the simple way).&#xA;&lt;bR&gt;&lt;bR&gt;If you're running the latest elementary+5.x kernel then:&#xA;&lt;bR&gt;4) Install the latest nvidia driver available from AppCenter (Currently I'm running 435.21 with zero issues).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know you mention something about Autodesk and AppCenter's NVidia driver, but I'm betting money on a kernel/driver issue. If done this way, it should give you what you need (hopefully).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;let me know! I'll try to run Maya myself to see if I have any issues or not.&lt;bR&gt;&#xA;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastEditorUserId="17526" LastEditDate="2019-12-20T05:07:11.033" LastActivityDate="2019-12-20T05:07:11.033" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21720" PostTypeId="2" ParentId="21466" CreationDate="2019-12-20T05:09:28.513" Score="0" Body="&lt;p&gt;Normally the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10000/elementary-os-wont-boot-past-live-cd-screen&quot;&gt;&lt;strong&gt;nomodeset trick&lt;/strong&gt;&lt;/a&gt; works 99.999% of the time. Can you confirm you tried this way? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, when booting from the USB media, please try both UEFI and BIOS with and w/o 'nomodeset' to see if there are different behaviors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks!&#xA;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-20T05:09:28.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21721" PostTypeId="2" ParentId="21703" CreationDate="2019-12-20T06:40:19.890" Score="0" Body="&lt;p&gt;I use the &lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppImageLauncher&lt;/a&gt;, it is a really great tool and if the AppImages support it it will even keep them up to date.&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2019-12-20T06:40:19.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21722" PostTypeId="1" AcceptedAnswerId="21723" CreationDate="2019-12-20T09:48:52.210" Score="1" ViewCount="102" Body="&lt;p&gt;I'm new to Linux btw. I accidentally set it so if I open .deb file, it will take me to Terminal, I've installed Gdebi, how do I fix it? &lt;/p&gt;&#xA;" OwnerUserId="19934" LastEditorUserId="16827" LastEditDate="2019-12-20T14:09:59.850" LastActivityDate="2019-12-20T14:09:59.850" Title="Need help to open. deb file" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21723" PostTypeId="2" ParentId="21722" CreationDate="2019-12-20T09:58:00.390" Score="1" Body="&lt;p&gt;Right click on a .deb and choose open with (or similar). Should be a checkbox for setting that option as default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I would suggest &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; instead of Gdebi for eOS.&lt;/p&gt;&#xA;" OwnerUserId="8704" LastActivityDate="2019-12-20T09:58:00.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21724" PostTypeId="1" CreationDate="2019-12-20T10:04:08.110" Score="0" ViewCount="690" Body="&lt;p&gt;could you please help me finding a solution for my VPN? I've setup VPN on my mikrotik router in the office and it is working just fine. So I've done same setup for my clients mikrotik and my elemenentary OS could not connect. Settings are perfectly same. VPN to my office is working but not to my client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem is that is not working only on my laptop with elementary OS, Windows and iOS is working...&lt;/p&gt;&#xA;" OwnerUserId="19935" LastActivityDate="2020-06-11T10:43:36.437" Title="L2TP / IPsec VPN on Mikrotik" Tags="|networking|vpn|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21725" PostTypeId="2" ParentId="21662" CreationDate="2019-12-20T10:43:15.107" Score="1" Body="&lt;p&gt;If you are developing for elementary I assume you are using Vala? There is an &lt;a href=&quot;https://kiwiirc.com/client/irc.gimp.org#vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;IRC&lt;/a&gt; listed over on &lt;a href=&quot;https://planet.vala-project.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;planet Vala&lt;/a&gt;. Perhaps someone on there will be able to provide assistance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise, I think here on the elementary stackexchange is currently the best place if the issue is very elementary specific.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck with your app!&lt;/p&gt;&#xA;" OwnerUserId="8704" LastActivityDate="2019-12-20T10:43:15.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21726" PostTypeId="1" CreationDate="2019-12-20T12:48:02.170" Score="2" ViewCount="410" Body="&lt;p&gt;I've using mac for more than 10 years. And now, suddenly, I'm a Linux user.&#xA;So far I've manage my self to do almost everything I used to do regularly in my mac, in great part thanks to the chrome platform and G Suite.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But there are a few simple things related to pdf management that I have not being able to accomplish, yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get to deal with a lot of documents in my work, most of them pdf files, and every once in a while, I get one of this files that needs to be rotated, splited and annotated. In my mac not that only it was very very easy, but I do it with a single app!: Preview.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you please help me to find a replacement solution to accomplish all this?. It will be great if it is a single app, and I'm willing to pay for it. It can be a Linux (debian or flatpack, Iḿ using Elementary OS) or it can be a web app.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Rotate pdf easily without loosing quality in a single step. The quality part is very important because it needs to be equally readable.&lt;/li&gt;&#xA;&lt;li&gt;Split pdf in parts easily in a single step.&lt;/li&gt;&#xA;&lt;li&gt;Annotate pdfs with geometric shapes, text and arrows...&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;So far i found two different apps for doing steps 2 and 3: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PDF Tricks &lt;a href=&quot;https://github.com/muriloventuroso/pd&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/muriloventuroso/pd&lt;/a&gt;...&#xA;LibreOffice Draw &lt;a href=&quot;https://www.libreoffice.org/discover/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.libreoffice.org/discover/&lt;/a&gt;...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But I don't like very much nether of them, for the 1 part (rotate easily) I'm clueless. Please help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for reading into this point, this community is the best part of being a #linuxuser #elementaryOS&lt;a href=&quot;https://youtu.be/ILNaKoThYPY&quot; rel=&quot;nofollow noreferrer&quot;&gt;enter link description here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19939" LastActivityDate="2021-01-18T14:05:15.613" Title="Managing pdf´s in Linux" Tags="|editor|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21727" PostTypeId="2" ParentId="21726" CreationDate="2019-12-20T13:12:45.537" Score="0" Body="&lt;p&gt;Have you tried &lt;a href=&quot;https://code-industry.net/masterpdfeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Master PDF Editor for Linux&lt;/a&gt;? It seems to encompass everything you required, and more. Here's s short list of capabilities (from their website):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Modify text and objects&#xA;Annotate PDF documents&#xA;Create and fill in PDF forms &#xA;Optical character recognition in PDF&#xA;Operations on PDF pages&#xA;PDF Bookmarks&#xA;Digital signatures &#xA;Create PDF documents&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Use &lt;a href=&quot;https://code-industry.net/get-master-pdf-editor-for-ubuntu/?download&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link to download the .deb file&lt;/a&gt;. Then install &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; and use it to open the .deb file and install Master PDF Editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4L9RW.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4L9RW.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The free version will add watermarks on saved documents, and restricts access to several features. The &lt;a href=&quot;https://code-industry.net/purchase-masterpdfeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;full version&lt;/a&gt; is available from around $70.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: If you want to, you can use &lt;a href=&quot;https://github.com/muriloventuroso/pdftricks/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;PDF Tricks' GitHub page&lt;/a&gt; to get in touch with the developer, and describe the features you'd like to see implemented. Use the &lt;code&gt;New Issue&lt;/code&gt; button to create a new ticket to request a new feature, and give as many details as possible.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2019-12-20T13:32:05.980" LastActivityDate="2019-12-20T13:32:05.980" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21729" PostTypeId="1" CreationDate="2019-12-20T14:16:16.987" Score="1" ViewCount="70" Body="&lt;p&gt;After shutdown eOS Hera starts in console mode, but after reboot it starts normally. After the command &quot;journalctl -xb | grep failed&quot; I see this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dec 20 16:49:30 veil-pc kernel: nvidia: module verification failed: signature and/or required key missing - tainting kernel&#xA;dec 20 16:49:25 veil-pc systemd-udevd[519]: Process '/usr/sbin/alsactl -E HOME=/run/alsa restore 1' failed with exit code 99.&#xA;dec 20 16:49:26 veil-pc systemd[1]: Dependency failed for /boot/efi.&#xA;dec 20 16:49:26 veil-pc systemd[1]: Dependency failed for Local File Systems.&#xA;dec 20 16:49:26 veil-pc systemd[1]: local-fs.target: Job local-fs.target/start failed with result 'dependency'.&#xA;dec 20 16:49:26 veil-pc systemd[1]: boot-efi.mount: Job boot-efi.mount/start failed with result 'dependency'.&#xA;dec 20 16:49:26 veil-pc systemd[1]: dev-disk-by\x2duuid-F571\x2d4F82.device: Job dev-disk-by\x2duuid-F571\x2d4F82.device/start failed with result 'timeout'.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This is my /etc/fstab:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda2 during installation&#xA;UUID=6ff479fb-e132-4a19-8f75-dc1b1ce9c3c4 /               ext4    errors=remount-ro 0       0&#xA;# /boot/efi was on /dev/sda1 during installation&#xA;UUID=F571-4F82  /boot/efi       vfat    umask=0077      0       0&#xA;/swapfile                                 none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Where's the problem?&lt;/p&gt;&#xA;" OwnerUserId="19942" LastActivityDate="2023-12-31T00:01:00.100" Title="eOS Hera doesn't start after shutdown and starts normally after reboot" Tags="|boot|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21730" PostTypeId="1" CreationDate="2019-12-20T14:51:59.880" Score="1" ViewCount="62" Body="&lt;p&gt;I've just installed elementary OS with &lt;strong&gt;QEMU on Windows 10&lt;/strong&gt; with the following command :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;qemu-system-x86_64.exe -accel hax -drive file=cg-box.img,index=0,media=disk,format=raw -cdrom elementaryos-5.1-stable.20191202.iso -m 8G -L Bios -usbdevice mouse -usbdevice keyboard -boot menu=on -rtc base=localtime,clock=host -parallel none -serial none -name cg-box -no-acpi -no-hpet -no-reboot&#xA;&#xA;qemu-system-x86_64.exe: -usbdevice mouse: '-usbdevice' is deprecated, please use '-device usb-...' instead&#xA;qemu-system-x86_64.exe: -usbdevice keyboard: '-usbdevice' is deprecated, please use '-device usb-...' instead&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;into a 200 GB qemu image and the installation went ok,except for one thing : I don't know how to start the desktop manager ! I tried with &lt;strong&gt;&quot;startx&quot;&lt;/strong&gt;,but it gives this error message :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FxHJM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FxHJM.png&quot; alt=&quot;1&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I suspect that I should configure X,but I don't know how. Check below what's inside the &lt;strong&gt;xorg.conf.new&lt;/strong&gt; file :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jPeMZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jPeMZ.png&quot; alt=&quot;2&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19945" LastEditorUserId="16827" LastEditDate="2019-12-21T05:22:13.393" LastActivityDate="2019-12-21T05:22:13.393" Title="Pantheon does not work on elementary OS installed with QEMU on Windows 10" Tags="|pantheon|xorg|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21731" PostTypeId="2" ParentId="19168" CreationDate="2019-12-20T14:56:48.187" Score="1" Body="&lt;p&gt;You can try to run the application directly from the folder with just one command in the terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You must first access the folder that komorebi was installed in (probably in the default folder): &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /System/Applications&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that just run the command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./komorebi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Be aware that when using more than one monitor the application is&#xA;  giving error&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;a href=&quot;https://github.com/cheesecakeufo/komorebi/issues/126&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/cheesecakeufo/komorebi/issues/126&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19944" LastActivityDate="2019-12-20T14:56:48.187" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21732" PostTypeId="2" ParentId="21729" CreationDate="2019-12-21T03:39:54.990" Score="0" Body="&lt;p&gt;Do you happen to have &quot;FAST BOOT&quot; option in your BIOS? I remember having issues when that was enabled and after a reboot all the &quot;fast boot&quot; data was discarded and systems started normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;give it a try and let me know, pls.&#xA;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-21T03:39:54.990" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21733" PostTypeId="1" CreationDate="2019-12-21T04:27:40.580" Score="0" ViewCount="23" Body="&lt;p&gt;i'm using Elementary OS Hera (was Juno before). Every time my laptop wake up from sleep mode and my current opened terminal display become weird.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before sleep mode:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/5g9ws.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5g9ws.png&quot; alt=&quot;A normal terminal display&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After sleep mode:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QsJB6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QsJB6.png&quot; alt=&quot;Werid terminal after wake up from sleep mode&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also notice that sometime it become like that even though i didn't sleep mode my laptop. Do we have any solution for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Laptop MSI GL62M 7RDX Nvidia GTX 1050&lt;/p&gt;&#xA;" OwnerUserId="19480" LastActivityDate="2019-12-21T04:27:40.580" Title="Terminal display become weird sometime" Tags="|release-juno|pantheon-terminal|release-hera|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21736" PostTypeId="2" ParentId="19399" CreationDate="2019-12-21T12:08:42.113" Score="0" Body="&lt;p&gt;Workspaces provide an alternative for some workflows and though I make heavy use of them for different purposes I have not found them to be an efficient alternative to [Alt + ` ] for cycling through windows of the same application in my daily workflow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use &lt;a href=&quot;https://gist.github.com/tysonholub/c737d562614aa0d83add66dbec378723&quot; rel=&quot;nofollow noreferrer&quot;&gt;a python script&lt;/a&gt; invoked by a custom keyboard shortcut as outlined in the code comments to accomplish this. This has worked well on Juno and Hera.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-21T12:08:42.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21737" PostTypeId="2" ParentId="19399" CreationDate="2019-12-21T14:00:09.183" Score="1" Body="&lt;p&gt;If you have a US Keyboard &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;Tab&lt;/kbd&gt; cycles through &lt;em&gt;all&lt;/em&gt; the windows.&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And yes, to cycle within a tabbed application:&lt;br&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Firefox:&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;tab&lt;/kbd&gt; (forwards) &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;tab&lt;/kbd&gt; (backwards)&lt;/li&gt;&#xA;&lt;li&gt;Files: &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;tab&lt;/kbd&gt; (forwards) &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Shift&lt;/kbd&gt;+&lt;kbd&gt;tab&lt;/kbd&gt; (backwards)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;PS: I think shortcuts can also depend upon the application used.&lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2019-12-24T03:02:23.297" LastActivityDate="2019-12-24T03:02:23.297" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21738" PostTypeId="2" ParentId="21729" CreationDate="2019-12-21T14:31:49.637" Score="0" Body="&lt;p&gt;It seems like your Filesystem can't be mounted because of some dependency issues. Do you have SecureBoot enabled in BIOS or LegacyBoot&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2019-12-21T14:31:49.637" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21739" PostTypeId="2" ParentId="21487" CreationDate="2019-12-21T15:07:40.273" Score="0" Body="&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; and login into the shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;ls -lA | grep 'Xauth*'&lt;/code&gt;. you'll see the line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-rw-------  1 root root   53 Nov 29 10:19 .Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to do &lt;code&gt;chown username:username .Xauthority&lt;/code&gt; and try logging in (you may also need to do the same for for &lt;code&gt;.ICEauthority&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Else, do &lt;code&gt;ls -ld /tmp&lt;/code&gt;. Check for the first 10 letters in the left: they should read exactly so: &lt;code&gt;drwxrwxrwt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;drwxrwxrwt 15 root root 4096 Nov 30 04:17 /tmp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Else, you need to do &lt;code&gt;sudo chmod a+wt /tmp&lt;/code&gt; and check again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; to reach the login screen again, and restart. &lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2019-12-21T15:25:17.397" LastActivityDate="2019-12-21T15:25:17.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21740" PostTypeId="2" ParentId="21364" CreationDate="2019-12-21T15:24:25.607" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Look I don't have enough reputation to comment, I'll remove this clarification once it's clear... (please don't downvote)&lt;/p&gt;&#xA;  &#xA;  &lt;ul&gt;&#xA;  &lt;li&gt;Is your login showing &quot;incorrect password&quot; or just loops back to login screen in the (no message)?&lt;/li&gt;&#xA;  &lt;li&gt;What is the details about graphics &amp;amp; corresponding drivers?&lt;/li&gt;&#xA;  &lt;/ul&gt;&#xA;  &#xA;  &lt;p&gt;Tip: Include system info (not personal data) while asking a question. Install &lt;a href=&quot;https://github.com/dylanaraps/neofetch&quot; rel=&quot;nofollow noreferrer&quot;&gt;neofetch&lt;/a&gt; for crisp output: &lt;code&gt;sudo apt install neofetch&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If the login screen just loops back without any message please follow the steps below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; and login into the shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now run &lt;code&gt;ls -lA | grep 'Xauth*'&lt;/code&gt;. you'll see the line&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-rw-------  1 root root   53 Nov 29 10:19 .Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then you need to do &lt;code&gt;chown username:username .Xauthority&lt;/code&gt; and try logging in (you may also need to do the same for for &lt;code&gt;.ICEauthority&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Else, do &lt;code&gt;ls -ld /tmp&lt;/code&gt;. Check for the first 10 letters in the left: they should read exactly so: &lt;code&gt;drwxrwxrwt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;drwxrwxrwt 15 root root 4096 Nov 30 04:17 /tmp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Else, you need to do &lt;code&gt;sudo chmod a+wt /tmp&lt;/code&gt; and check again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; to reach the login screen again, and restart. &lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2019-12-21T15:29:33.453" LastActivityDate="2019-12-21T15:29:33.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21741" PostTypeId="1" CreationDate="2019-12-21T17:33:43.677" Score="0" ViewCount="324" Body="&lt;p&gt;After I changed my user from administrator to standard user to setup Parental Controls on my own account, which was the first account I created on my fresh installation, I could not login with the same password I used before &lt;em&gt;(To setup Parental Controls I created another account called Admin and gave it admin rights, then through that user, I changed my own user to standard, which I reverted and deleted that Admin account after this problem)&lt;/em&gt;.  I'm pretty sure it has nothing to do with the keyboard layout because I can login through the login screen of Ctrl+Alt+F1. And the reaction of the password bar is different than when the password typed is wrong. Because if it is wrong it shakes after a second or two delay, but when I type my correct password, it shakes immediately. So far I tried deleting and checking the ownership of ~/.Xauthority, in separate occasions, but it did not work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I can log in automatically eventhough the toggle of &quot;log in automatically&quot; in user accounts settings is turned off, and when I try to turn it on and reboot, it turns off again, yet I can still log in automatically.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on elementary OS 5.1 Hera. I looked around the web but couldn't find any solutions, hope you can help me.&lt;/p&gt;&#xA;" OwnerUserId="19949" LastEditorUserId="19949" LastEditDate="2019-12-21T18:44:23.523" LastActivityDate="2019-12-23T21:24:34.690" Title="Login Password Not Working After Changing User from Admin to Standard" Tags="|settings|greeter|system|ubuntu|release-hera|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="21743" PostTypeId="1" CreationDate="2019-12-21T17:54:12.957" Score="1" ViewCount="50" Body="&lt;p&gt;I have created an ISO using Rufus for a dual boot system, where there is already a windows partition present on 50% of the drive. However I cannot figure out how to get my older (asus VU43) laptop to boot from the USB stick -- the problem is that this particular model of laptop has a bios that was never properly updated to handle UEFI USB devices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore I need to move the whole thing to a bootable DVD. What tool can I use for that?&lt;/p&gt;&#xA;" OwnerUserId="19950" LastActivityDate="2021-06-08T01:07:40.663" Title="How do I clone the Installation ISO onto a DVD?" Tags="|system-installation|dvd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21744" PostTypeId="1" CreationDate="2019-12-21T19:01:50.680" Score="0" ViewCount="705" Body="&lt;p&gt;&lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;The AppCenter is a flatpak repo&lt;/a&gt;, so it should be possible (in theory) to add the AppCenter Flatpak repo to an OS other than elementary. I've been searching for a while but haven't found anything relevant.&lt;/p&gt;&#xA;&lt;p&gt;So, can I have a &lt;code&gt;.flatpakrepo&lt;/code&gt; for the appcenter?&lt;/p&gt;&#xA;&lt;p&gt;Apologies if this is the wrong place to ask.&lt;/p&gt;&#xA;" OwnerUserId="19952" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2024-01-01T17:02:55.367" Title="What is the Flatpak repo for the AppCenter?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21746" PostTypeId="2" ParentId="21743" CreationDate="2019-12-22T03:18:28.817" Score="1" Body="&lt;p&gt;Try downloading and using &quot;Brasero&quot; from the AppCenter (it's a non-curated app, but works flawlessly from here).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Image Burner&quot; It's a great util but I think it's only for USB drives. &lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-22T03:18:28.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21747" PostTypeId="1" AcceptedAnswerId="21816" CreationDate="2019-12-22T05:16:54.400" Score="0" ViewCount="54" Body="&lt;p&gt;after the I received update from appcenter, when I import pictures to wallpaper they are not shown up as thumbnails. Only blank. Oh it's eos 5.1.&#xA;Anyway to fix it? And where do I report the bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&lt;a href=&quot;https://i.stack.imgur.com/rzdXB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rzdXB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-24T00:04:55.453" Title="(Bug) No thumbnail of wallpaper in Settings" Tags="|settings|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21749" PostTypeId="1" CreationDate="2019-12-22T12:25:46.540" Score="0" ViewCount="93" Body="&lt;p&gt;I have a Lenovo 330 Laptop and in Win10 I run three additional monitors from a USB C hub.  Elementary only sees the laptop screen and one additional monitor.  Is there some way to find all the monitors?&lt;/p&gt;&#xA;" OwnerUserId="19960" LastActivityDate="2024-01-01T06:07:55.947" Title="Lenovo 330 multiple displays" Tags="|display|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21750" PostTypeId="1" CreationDate="2019-12-22T13:13:15.117" Score="1" ViewCount="555" Body="&lt;p&gt;Can not install pcloud ,or can not run the AppImage downloaded from pCloud website ? How to run ?&#xA;App Image working fine in ubuntu,MxLinux etc. I have tested .&#xA;why not in elementary os ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I  am using &#xA;elementary OS 5.1 Hera&#xA;Built on Ubuntu 18.04.3 LTS&#xA;Linux 4.15.0-72-generic&#xA;GTK 3.22.30&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please  help me . thanks in advance .&lt;/p&gt;&#xA;" OwnerUserId="19961" LastActivityDate="2024-01-02T08:08:01.020" Title="pCloud installation problem, Can not install or run Pcloud" Tags="|release-hera|appimage|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21751" PostTypeId="1" CreationDate="2019-12-22T14:20:44.127" Score="0" ViewCount="181" Body="&lt;p&gt;I'm very new to elementary (and to Linux in general; i like especially elementary OS.) In the AppCenter I can't find the current version of Thunderbird or Evolution. Will it come later and is this a usual delay? Thank you. &lt;/p&gt;&#xA;" OwnerUserId="19963" LastActivityDate="2019-12-22T17:28:51.433" Title="AppCenter/current versions of apps" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21752" PostTypeId="2" ParentId="21751" CreationDate="2019-12-22T16:30:02.833" Score="1" Body="&lt;p&gt;Are you looking for the currently installed version or the available to be installed version from AppCenter?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The later will appear to the side of the name once you click in the app:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kX6cq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kX6cq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-22T16:30:02.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21753" PostTypeId="2" ParentId="21749" CreationDate="2019-12-22T16:36:11.237" Score="0" Body="&lt;p&gt;From a command prompt, run &lt;code&gt;xrandr&lt;/code&gt; command. &#xA;That will list you all your displays and supported modes, here's is my personal example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 320 x 200, current 3840 x 2160, maximum 16384 x 16384&#xA;&#xA;eDP-1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 346mm x 194mm&#xA;   3840x2160     60.00*+  59.98    59.97  &#xA;   3200x1800     59.96    59.94  &#xA;   2880x1620     59.96    59.97  &#xA;   2560x1600     59.99    59.97  &#xA;   2560x1440     59.99    59.99    59.96    59.95  &#xA;   2048x1536     60.00  &#xA;   1920x1440     60.00  &#xA;   1856x1392     60.01  &#xA;   1792x1344     60.01  &#xA;   2048x1152     59.99    59.98    59.90    59.91  &#xA;   1920x1200     59.88    59.95  &#xA;   1920x1080     60.01    59.97    59.96    59.93  &#xA;   1600x1200     60.00  &#xA;   1680x1050     59.95    59.88  &#xA;   1600x1024     60.17  &#xA;   1400x1050     59.98  &#xA;   1600x900      59.99    59.94    59.95    59.82  &#xA;   1280x1024     60.02  &#xA;   1440x900      59.89  &#xA;   1400x900      59.96    59.88  &#xA;   1280x960      60.00  &#xA;   1440x810      60.00    59.97  &#xA;   1368x768      59.88    59.85  &#xA;   1360x768      59.80    59.96  &#xA;   1280x800      59.99    59.97    59.81    59.91  &#xA;   1152x864      60.00  &#xA;   1280x720      60.00    59.99    59.86    59.74  &#xA;   1024x768      60.04    60.00  &#xA;   960x720       60.00  &#xA;   928x696       60.05  &#xA;   896x672       60.01  &#xA;   1024x576      59.95    59.96    59.90    59.82  &#xA;   960x600       59.93    60.00  &#xA;   960x540       59.96    59.99    59.63    59.82  &#xA;   800x600       60.00    60.32    56.25  &#xA;   840x525       60.01    59.88  &#xA;   864x486       59.92    59.57  &#xA;   800x512       60.17  &#xA;   700x525       59.98  &#xA;   800x450       59.95    59.82  &#xA;   640x512       60.02  &#xA;   720x450       59.89  &#xA;   700x450       59.96    59.88  &#xA;   640x480       60.00    59.94  &#xA;   720x405       59.51    58.99  &#xA;   684x384       59.88    59.85  &#xA;   680x384       59.80    59.96  &#xA;   640x400       59.88    59.98  &#xA;   576x432       60.06  &#xA;   640x360       59.86    59.83    59.84    59.32  &#xA;   512x384       60.00  &#xA;   512x288       60.00    59.92  &#xA;   480x270       59.63    59.82  &#xA;   400x300       60.32    56.34  &#xA;   432x243       59.92    59.57  &#xA;   320x240       60.05  &#xA;   360x202       59.51    59.13  &#xA;   320x180       59.84    59.32  &#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-1 disconnected (normal left inverted right x axis y axis)&#xA;DP-2 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-2 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Afterwards, you can turn them on an off from the command line as well depending location, resolution, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For instance, I have my 4k main laptop display + a DisplayPort connected (through a Thunderbolt dock) 1080p display &lt;strong&gt;on the right side&lt;/strong&gt; of my desk. In order to accomplish this with one display being HiDPI and a normal one I have the following script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --dpi 200 --fb 7680x2160 --output eDP-1 --mode 3840x2160 --output DP-1-1 --auto --scale 2x2 --pos 3840x0 --panning 3840x2160+3840+0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;eDP-1 is laptop 4k display&#xA;DP-1-1 is FHD monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to the &lt;a href=&quot;https://www.x.org/releases/X11R7.5/doc/man/man1/xrandr.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;official xrandr man page&lt;/a&gt; for more information and some examples :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-22T16:36:11.237" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21754" PostTypeId="2" ParentId="21750" CreationDate="2019-12-22T16:39:08.283" Score="0" Body="&lt;p&gt;Not sure about the issue, but strikes me as a surprise that you're using 4.15.xxx kernel while 5.1 was 'upgraded' to 5.0.xxx.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you try rebooting and check in the &quot;Advanced options for elementary&quot; if you can boot the newer kernel?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if you can, can you re-try the AppImage installation?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks!&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-22T16:39:08.283" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21755" PostTypeId="2" ParentId="21751" CreationDate="2019-12-22T16:44:48.127" Score="2" Body="&lt;p&gt;Elementary OS is an excellent choice and version 5.1 Hera supports Flatpak which gives you an alternative source for applications. It just so happens that the latest version (at the time I wrote this :)) of Thunderbird (68.3.0) and Evolution (3.34.2) are available on Flathub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to get support for Flatpak apps in the AppCenter you will need to sideload your first application as outlined below:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &lt;a href=&quot;https://www.flathub.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;flathub.org&lt;/a&gt; in your browser&lt;/li&gt;&#xA;&lt;li&gt;Search for either Thunderbird or Evolution using the search bar at the top of the page&lt;/li&gt;&#xA;&lt;li&gt;Click on the application in the search results&lt;/li&gt;&#xA;&lt;li&gt;Click on the &quot;Install&quot; button which will download a file ending in .flatpakref (e.g. org.gnome.Evolution.flatpakref)&lt;/li&gt;&#xA;&lt;li&gt;Once the file is downloaded navigate to your Downloads directory using the Files application&lt;/li&gt;&#xA;&lt;li&gt;Click on the newly downloaded file and you will be warned that this is not an Elementary OS curated application but you will be given the option to install it anyway&lt;/li&gt;&#xA;&lt;li&gt;Check the &quot;I understand&quot; box and click on &quot;Install Anyway&quot;&lt;/li&gt;&#xA;&lt;li&gt;Once the application is installed you will find it in your Application s menu and the flathub.org repo will be added to the App Center allowing you to install any other Flatpak applications on Flathub using the App Center&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;NOTE: Applications that exist in both the standard AppCenter repo and the Flathub repo will have a dropdown under the name allowing you to choose which version you want to install. In your case you will want to choose the flathub version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kjS9r.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kjS9r.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2019-12-22T17:28:51.433" LastActivityDate="2019-12-22T17:28:51.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21756" PostTypeId="2" ParentId="21726" CreationDate="2019-12-22T18:01:38.893" Score="1" Body="&lt;p&gt;If it is only about rotation of the pdf, it can be easily done by Evince, the default Document viewer for Elementary Os, I do not know about the default version, but I did upgrade it with the flatpak version and rotation is easy done with not notable quality loss, at least i do not notice any. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-25T11:36:43.530" LastActivityDate="2019-12-25T11:36:43.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21757" PostTypeId="1" AcceptedAnswerId="21759" CreationDate="2019-12-22T19:15:18.493" Score="0" ViewCount="158" Body="&lt;p&gt;Is there any possibility to change default mouse pointers to mirrored ones, suitable for lefties? Tried Google and local search - no results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanx.&lt;/p&gt;&#xA;" OwnerUserId="19967" LastActivityDate="2019-12-22T22:52:39.200" Title="Mouse pointers for lefties" Tags="|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21758" PostTypeId="1" CreationDate="2019-12-22T21:30:57.490" Score="1" ViewCount="41" Body="&lt;p&gt;One thing I would like to make more like MacOS is the way the display pans when you've zoomed in on it, using the &quot;zoom in&quot; shortcut Cmd-plus. On a Mac, the display pans (moves across the screen) only when the cursor hits the edge of the screen, whereas on eOS it pans continuously as you move the cursor, so you also reach the edge of the display once the cursor hits the edge of the screen. The latter has the unfortunate effect that your display is essentially always moving around, which I find quite distracting (wouldn't anyone?). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there isn't an Xserver option to get this behavior, please regard changing this as a feature request.&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="19832" LastEditDate="2019-12-26T15:05:10.143" LastActivityDate="2019-12-26T15:05:10.143" Title="Want a zoomed-in display to pan the way a Mac does" Tags="|display|pantheon|user-interface|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21759" PostTypeId="2" ParentId="21757" CreationDate="2019-12-22T22:52:39.200" Score="2" Body="&lt;p&gt;You can install custom cursor themes in your profile using the following guide. You can find other themes that will work but for this example I am using the Obsidian Left theme.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download the theme archive from &lt;a href=&quot;https://www.gnome-look.org/p/999703/startdownload?file_id=1460734735&amp;amp;file_name=121197-Obsidian_L.tar.gz&amp;amp;file_type=application/x-gzip&amp;amp;file_size=309862&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;If it does not already exist create a directory named .icons in your home folder, from the terminal you can run:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;mkdir ~/.icons&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Unzip the archive into the newly created .icons folder. The result should look like:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;/home/yourusername/.icons/Obsidian_L&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Run the following command in the terminal in order to set the theme&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gsettings set org.gnome.desktop.interface cursor-theme &quot;Obsidian_L&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;If all goes well you should have left-handed cursors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to go back to the default run the following in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;gsettings set org.gnome.desktop.interface cursor-theme &quot;elementary&quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2019-12-22T22:52:39.200" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21760" PostTypeId="1" CreationDate="2019-12-22T23:43:52.180" Score="3" ViewCount="1636" Body="&lt;p&gt;I have just installed elementary Hera. &#xA;But I have one problem every time I shutdown my PC I get the following message: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;~a stop job is running for session c2 of user xxx~&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then the 90 seconds timer counts down and I have to wait.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="19863" LastActivityDate="2020-01-03T17:13:51.840" Title="Every shutdown takes very long. Issue: &quot;A stop job is running for session c2 of user xxx&quot;" Tags="|release-hera|shutdown|" AnswerCount="2" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="21761" PostTypeId="2" ParentId="21760" CreationDate="2019-12-23T02:12:36.860" Score="2" Body="&lt;p&gt;I had the same problem and could not find a solution, you can set the timer to a smaller value in: &lt;code&gt;/etc/systemd/system.conf&lt;/code&gt;. (If it is empty, here is a copy: &lt;a href=&quot;https://p.ip.fi/bZfs&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://p.ip.fi/bZfs&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uncomment line &lt;code&gt;DefaultTimeoutStopSec=90s&lt;/code&gt; then change it to a lower value.&#xA;Then run &lt;code&gt;systemctl daemon-reload&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps...&lt;/p&gt;&#xA;" OwnerUserId="19972" LastEditorUserId="16827" LastEditDate="2020-01-01T05:53:57.940" LastActivityDate="2020-01-01T05:53:57.940" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21763" PostTypeId="2" ParentId="21744" CreationDate="2019-12-23T09:32:51.087" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;We’ll be providing our own hosted and curated Flatpak repo for AppCenter ...&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I don't think this is ready/public yet (-&gt; We &lt;em&gt;will&lt;/em&gt;). I've only installed Flatpaks so far from flathub on elementary.&lt;/p&gt;&#xA;" OwnerUserId="19727" LastActivityDate="2019-12-23T09:32:51.087" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21764" PostTypeId="1" AcceptedAnswerId="24474" CreationDate="2019-12-23T10:15:47.197" Score="0" ViewCount="1876" Body="&lt;p&gt;Io.elementary.greeter&#xA;Starting the session has failed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Details : Session Returned error code 1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone please tell me why this is happening????? I can't login and there are so many projects I have on this that I need to use !! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went into the command line and there was an ACPI error that kept on coming up saying&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ACPI BIOS Error(bug): Could Not Resolve [_SB.IPPF._STA.POS1], AE_NOT_FOUND (psargs-330)&lt;/p&gt;&#xA;" OwnerUserId="19979" LastActivityDate="2020-05-09T08:32:09.750" Title="Starting session has failed. Unable to login" Tags="|elementary-website|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21765" PostTypeId="2" ParentId="18374" CreationDate="2019-12-23T11:58:00.230" Score="0" Body="&lt;p&gt;This is a widely known problem for Nvidia drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The probable way to fix this is using &lt;code&gt;nomodeset&lt;/code&gt; (as reported in lot of other places) then installing the proprietary drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It may be true that Pop!OS does not require this step, is reported that they are able to overcome this issue (but I have no idea why).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix it on Ubuntu or elementary follow these steps.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Install elementary&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;put the live USB in your computer, &lt;/li&gt;&#xA;&lt;li&gt;during the boot process, press and hold SHIFT key. Now you can see the grub menu.&lt;/li&gt;&#xA;&lt;li&gt;press e key on line &quot;try ementary without installing&quot; to edit it.&lt;/li&gt;&#xA;&lt;li&gt;go to line with the &lt;code&gt;quiet splash&lt;/code&gt; sentence. Something like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro quiet splash&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;add the &lt;code&gt;nomodeset&lt;/code&gt; option between &lt;code&gt;ro&lt;/code&gt; and &lt;code&gt;quiet splash&lt;/code&gt;. You must see someting like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro nomedeset quiet splash&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;press &lt;code&gt;Ctrl + X&lt;/code&gt; to boot the kernel&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;After installation&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;during the boot process, press and hold SHIFT key. Now you can see the grub menu.&lt;/li&gt;&#xA;&lt;li&gt;press e key on line &quot;elementary&quot; to edit it.&lt;/li&gt;&#xA;&lt;li&gt;go to line with the &lt;code&gt;quiet splash&lt;/code&gt; sentence. Something like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro quiet splash&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;add the &lt;code&gt;nouveau.modeset=0&lt;/code&gt; option between &lt;code&gt;ro&lt;/code&gt; and &lt;code&gt;quiet splash&lt;/code&gt;. You must see someting like: &lt;code&gt;linux /boot/vmlinuz-4.4.0-57-generic root=UUID=xxxx-xxxx-xxxxx ro nouveau.modeset=0 quiet splash&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;press &lt;code&gt;Ctrl + X&lt;/code&gt; to boot the kernel&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;This will &lt;strong&gt;disable&lt;/strong&gt; nouveau drivers. At this point I would expect the pc to boot properly (using the Intel video chipset).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; if it didn't work, replace &lt;code&gt;nouveau.modeset=0&lt;/code&gt; with &lt;code&gt;nomodeset&lt;/code&gt; and try again. &lt;code&gt;nomodeset&lt;/code&gt; is more invasive and will disable more kernel features, you should still be able to finish the process.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Install Nvidia drivers&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Open a terminal and run:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;ubuntu-drivers devices&lt;/code&gt; you should see your graphic card listed&lt;/li&gt;&#xA;&lt;li&gt;now run &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; which should install appropriate graphic card drivers&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;At this point you should be able to reboot to a properly working system (&lt;code&gt;nomodeset&lt;/code&gt; should not be required anymore).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;All this information was taken from multiple places:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10000/elementary-os-wont-boot-past-live-cd-screen&quot;&gt;elementary OS won&amp;#39;t boot past live CD screen&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/linux4noobs/comments/bi0if0/stuck_at_synchronizing_scsi_cache/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/linux4noobs/comments/bi0if0/stuck_at_synchronizing_scsi_cache/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/1155866/ubuntu-installation-gets-stuck-at-sda-synchronising-scsi-cache&quot;&gt;https://askubuntu.com/questions/1155866/ubuntu-installation-gets-stuck-at-sda-synchronising-scsi-cache&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.reddit.com/r/Ubuntu/comments/apw7kh/nvidia_problems_when_installing_ubuntu_or_running/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/Ubuntu/comments/apw7kh/nvidia_problems_when_installing_ubuntu_or_running/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;In case you want to use driver more up to date than the one &lt;code&gt;ubuntu-drivers&lt;/code&gt; may install, you can refer to this answer: &lt;a href=&quot;https://askubuntu.com/a/747429/22318&quot;&gt;https://askubuntu.com/a/747429/22318&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19056" LastActivityDate="2019-12-23T11:58:00.230" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21766" PostTypeId="1" CreationDate="2019-12-23T12:56:36.027" Score="0" ViewCount="69" Body="&lt;p&gt;I know it's a uncurated app so I don't really expect this question to be answered, but the fact of the matter is I just installed KeePass from the Application Center, created a database with just a Master Password (no KeyFile) containing just one entry, saved it on the system disk, closed it (for some reason it insisted on saving it again even though I hadn't touched it since the first save), and then couldn't open it again (database corrupted or password wrong).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On checking the GitHub repository I found that this &quot;issue&quot; (astonishingly embarrassing blunder I would call it) was fixed in KeePass 2.2.4, and the Application Center had given me 2.0.3. So I deleted it, went to apt-cache search and found no less than 3 versions available: keypass2, keypassx &amp;amp; keypassxc. Comments on AskUbuntu by a more diligent user than me however indicated that only the latter was still being updated regularly, so I installed it and it works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Bottom line: Uncurated is one thing, but totally untested is quite another, and now I'm no longer sure that I can trust any uncurated apps from the Application Center. That is really not acceptable!&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2019-12-24T13:24:54.333" Title="KeePass from Application Center just plain doesn't work" Tags="|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21767" PostTypeId="1" CreationDate="2019-12-23T13:27:14.847" Score="0" ViewCount="117" Body="&lt;p&gt;Having an issue with Mail closing on its own randomly. Using a Gmail account. Typically it happens after performing an action, like deleting an email.&lt;/p&gt;&#xA;" OwnerUserId="19866" LastActivityDate="2024-01-02T15:03:35.383" Title="Pantehon mail closing on its own when performing an action" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21769" PostTypeId="2" ParentId="21766" CreationDate="2019-12-23T16:50:25.410" Score="1" Body="&lt;p&gt;I was unable to replicate this issue following your steps in the first paragraph. Is it KeePass or KeePassX? I found KeePassX and KeePassXC in the AppCenter and neither seemed to have the issue, although maybe there is a particular setup this happens with.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To your more general question, while I can't speak for elementary, this appears to be exactly what they mean by &quot;uncurated&quot; (note the &quot;It may not receive bug fix or feature updates&quot; warning when installing one), and they don't appear to spend time on checking uncurated apps for issues/upgrades between bi-annual releases. I don't believe you are expected to trust the uncurated apps; trust in the curated apps, sideload or install uncurated where you feel you can and want to invest the research necessary.&lt;/p&gt;&#xA;" OwnerUserId="19981" LastActivityDate="2019-12-23T16:50:25.410" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21770" PostTypeId="2" ParentId="21750" CreationDate="2019-12-23T18:09:12.340" Score="0" Body="&lt;p&gt;I have installed pCloud using appImage a few weeks ago and it works fine. There was a few problems - because I was trying to move the pCloudDrive folder into another drive, and also my download location by default is the Desktop folder, but later I moved the appimage into another location and.. the icon was broken and a little minor issues because of that. So, what I recommend you is to follow the pCloud instructions on how to install it, and do not forget to:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;make the appimage executable.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;place the app image before you execute it in a location that you will keep it all the time.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;do not move&lt;/strong&gt; the pCloudDrive location folder, if you wish to use another drive, change the cache file location to be there - pcloud properties &amp;gt; Settings &amp;gt; Cache location.&lt;/p&gt;&#xA;&lt;p&gt;N.B.! &lt;strong&gt;you will not see the pcloud icon into the wingpanel top bar!&lt;/strong&gt; elementary OS team has disabled this functionality by default, if you wish to have icons there - there is a solution that works for me on &lt;a href=&quot;https://translate.google.cl/translate?sl=es&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=es-419&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fentornosgnulinux.com%2F2018%2F08%2F15%2Fcomo-instalar-wingpanel-indicator-ayatana-en-elementary-os-juno%2F&amp;amp;edit-text=&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://translate.google.cl/translate?sl=es&amp;amp;tl=en&amp;amp;js=y&amp;amp;prev=_t&amp;amp;hl=es-419&amp;amp;ie=UTF-8&amp;amp;u=http%3A%2F%2Fentornosgnulinux.com%2F2018%2F08%2F15%2Fcomo-instalar-wingpanel-indicator-ayatana-en-elementary-os-juno%2F&amp;amp;edit-text=&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-23T18:18:47.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21771" PostTypeId="1" CreationDate="2019-12-23T19:08:10.880" Score="0" ViewCount="102" Body="&lt;p&gt;I recently install ElementaryOS and have spent hours trying to get wireless enabled. I have a Toshiba Satellite L55 and went into Bios and enabled wifi power. Any information you need to help me, I will provide. Thank you, I would really like to use ElementaryOS.&lt;/p&gt;&#xA;" OwnerUserId="19984" LastActivityDate="2024-01-02T22:00:30.050" Title="Wifi Disabled with Intel Wireless Adapter 8265" Tags="|wifi|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21772" PostTypeId="1" CreationDate="2019-12-23T20:57:39.850" Score="0" ViewCount="59" Body="&lt;p&gt;recently I have installed elementary OS but my numpad don't work. I have tried installing several applications, but there wasn't much difference. Can someone help me how to turn it on?&lt;/p&gt;&#xA;" OwnerUserId="19986" LastActivityDate="2020-01-23T08:02:30.367" Title="Numpad don't work" Tags="|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21773" PostTypeId="2" ParentId="21767" CreationDate="2019-12-23T21:10:52.867" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://www.addictivetips.com/ubuntu-linux-tips/back-up-geary-mail-profile-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.addictivetips.com/ubuntu-linux-tips/back-up-geary-mail-profile-linux/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Read and think. This is the same app in Elementary OS, they just renamed it. You can remove the profile in the terminal using a command sudo rm - rf&#xA;Read the link I provided. You have a location provided there. This program is really piece of junk, because it is not able to handle large size messages especially with large attachments. Reconsider to get rid of this via sudo apt remove - -purge appnameinelementary Use Mozilla Thunderbird instead. Tested. No issues. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-23T21:10:52.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21774" PostTypeId="2" ParentId="21764" CreationDate="2019-12-23T21:19:35.893" Score="0" Body="&lt;p&gt;Try this :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WORKAROUND &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit /etc/default/grub &#xA;and add in GRUB_CMDLINE_LINUX_DEFAULT line AFTER quiet word these: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;vga=current loglevel=3 rd.systemd.show_status=auto rd.udev.log_priority=3 &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next update grub : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo update-grub&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last thing is creating SYSCTL rule:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo bash -c &quot;echo ‘kernel.printk = 3 3 3 3’ &gt; /etc/sysctl.d/20-quiet-printk.conf’&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo systemctl reboot &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will just HIDE error msgs during boot, still exists in dmesg results. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-23T21:19:35.893" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21777" PostTypeId="2" ParentId="21690" CreationDate="2019-12-23T21:30:22.483" Score="0" Body="&lt;p&gt;Ir you have only one drive with Windows 10, you have to resize it and leave for example 50 GB of unallocated space for Elementary. Then during the Elementary OS installation you will be able to use unallocated space to create partitions there. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-23T21:30:22.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21778" PostTypeId="2" ParentId="21673" CreationDate="2019-12-23T21:33:36.727" Score="0" Body="&lt;p&gt;Videos will not play. Install Firefox &lt;code&gt;sudo apt install firefox&lt;/code&gt;, Chrome or Chromium and get rid of this browser by typing in terminal &lt;code&gt;sudo apt remove --purge epiphany&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="18392" LastEditDate="2019-12-24T07:46:51.707" LastActivityDate="2019-12-24T07:46:51.707" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21779" PostTypeId="2" ParentId="14509" CreationDate="2019-12-23T23:33:55.520" Score="1" Body="&lt;p&gt;Try to disable IPv6 and restart system. Few Ubuntu distro had similar issue in back., Since eOS is based on Ubuntu worth trying if that'll fix issue.&lt;/p&gt;&#xA;" OwnerUserId="19583" LastActivityDate="2019-12-23T23:33:55.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21780" PostTypeId="1" AcceptedAnswerId="21802" CreationDate="2019-12-23T23:37:06.830" Score="1" ViewCount="247" Body="&lt;p&gt;I'd like to extend my app launcher grid and I saw some videos where people do it by installing tweak and changing the grid under launcher.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed this guide &lt;a href=&quot;https://www.addictivetips.com/ubuntu-linux-tips/improve-elementary-oss-quick-launcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.addictivetips.com/ubuntu-linux-tips/improve-elementary-oss-quick-launcher/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tweak appears in settings, even installed an osx theme but the grid option doesnt show up, only show category by default is there&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it's a fresh install of 5.1 and first time using linux. other things I did were just install chrome and osx theme&lt;/p&gt;&#xA;" OwnerUserId="19990" LastActivityDate="2019-12-24T23:17:43.780" Title="cant change app launcher grid in settings/tweak" Tags="|applications|apps|launcher|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21782" PostTypeId="2" ParentId="21780" CreationDate="2019-12-24T02:59:23.037" Score="0" Body="&lt;p&gt;I'm afraid that &lt;code&gt;elementary-tweaks&lt;/code&gt; no longer has this option. I couldn't find it in &lt;code&gt;dconf-editor&lt;/code&gt; either (though this was an excellent idea @Raj).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many Linux desktop environments are more tweakable than elementary's Pantheon system, and if tweaking is important to you, check them out! My advice would be to live with the workflow elementary gives you without tweaking it too much, though. I think you'll like what you'll find when you stop worrying about futzing with it. : )&lt;/p&gt;&#xA;" OwnerUserId="19981" LastActivityDate="2019-12-24T02:59:23.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21783" PostTypeId="2" ParentId="21772" CreationDate="2019-12-24T07:26:00.840" Score="-1" Body="&lt;p&gt;There are answers in the Internet. All you need to do is to look for in Google. You did not even try. I gave you a link above in the comment. I would like to ask you to try to search in Google for such a trivial issues.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-24T07:26:00.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21784" PostTypeId="1" CreationDate="2019-12-24T07:26:16.663" Score="0" ViewCount="344" Body="&lt;p&gt;подскажите что делать использовал команду &#xA;alsamixer&#xA;там ничего на mute не стоит но звука все равно нет, я новичок в Linux помогите пожалуйста.&lt;/p&gt;&#xA;" OwnerUserId="19993" LastActivityDate="2024-01-02T23:01:25.147" Title="Elementary OS нет звука нигде" Tags="|sound|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21785" PostTypeId="2" ParentId="21771" CreationDate="2019-12-24T07:28:47.827" Score="0" Body="&lt;p&gt;First of all check in terminal with command uname -a what kernel version do you have. If newer then ignore the solution below and download drivers from Intel provided in the second link.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solution from here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/9874/intel-8265-doesnt-work-in-loki&quot;&gt;Intel 8265 doesn't work in Loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See if sudo apt-get install linux-generic-hwe-16.04-edge gets the 4.8 kernel installed and then do&lt;/p&gt;&#xA;&#xA;&lt;p&gt;wget &lt;a href=&quot;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.161.1_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.161.1_all.deb&lt;/a&gt;&#xA;sudo dpkg -i linux-firmware_1.161.1_all.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also drivers from Intel can be downloaded here: &lt;a href=&quot;https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-io/wireless-networking.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux* Support for Intel® Wireless Adapters&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-24T07:28:47.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21787" PostTypeId="2" ParentId="21670" CreationDate="2019-12-24T07:39:44.070" Score="-1" Body="&lt;pre&gt;&lt;code&gt;sudo apt remove --purge appcenter appstream&#xA;&#xA;sudo apt install appcenter &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="16827" LastEditDate="2019-12-28T11:03:58.623" LastActivityDate="2019-12-28T11:03:58.623" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21788" PostTypeId="1" AcceptedAnswerId="21853" CreationDate="2019-12-24T09:03:34.423" Score="0" ViewCount="276" Body="&lt;p&gt;since today my Marshall Major 3 can't be connected to my laptop. I never had any issued until today, but now i only can appair to it, and when i try to connect to my hedset i have the error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;impossible connection&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;My headset works fine with my phone, so i really think the problem comes from Elementary...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ps: I have an Huawei matebook D if that can help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit:&lt;br&gt;&#xA;journalctl returns the following response each time I try to connect to my headset:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;bluetoothd[10401]: a2dp-sink profile connect failed for 2C:4D:79:C1:3E:11: Protocol not available&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Also, i can't remember which command I've typed for that, but I saw some segfault reffereing to the bluetooth. I know it's not very useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I searched some fixes for the &quot;Protocol not available&quot; issue, and a possible fix would be to install &quot;pulseaudio-module-bluetooth&quot;, but when I try to install it, i get the following error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Some packages could not be installed. This may mean that you have&#xA;  requested an impossible situation or if you are using the unstable&#xA;  distribution that some required packages have not yet been created&#xA;  or been moved out of Incoming.&#xA;  The following information may help to resolve the situation:&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;The following packages have unmet dependencies:&lt;br&gt;&#xA;   pulseaudio-module-bluetooth :&lt;br&gt;&#xA;  Depends: libpulse0 (= 1:11.1-1ubuntu7.4) but 1:11.1-1ubuntu7.5 is to be installed&lt;br&gt;&#xA;  Depends: pulseaudio (= 1:11.1-1ubuntu7.4)&lt;br&gt;&#xA;  E: Unable to correct problems, you have held broken packages.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19995" LastEditorUserId="19995" LastEditDate="2019-12-29T09:43:08.540" LastActivityDate="2020-02-25T13:48:28.210" Title="Bluetooth headset can no longer be connected" Tags="|bluetooth|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21789" PostTypeId="2" ParentId="21788" CreationDate="2019-12-24T10:04:22.713" Score="0" Body="&lt;p&gt;Open terminal and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install blueman&#xA;&#xA;sudo apt install nano&#xA;&#xA;sudo nano /etc/bluetooth/main.conf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change &lt;code&gt;#AutoEnable=false&lt;/code&gt; to &lt;code&gt;AutoEnable=true&lt;/code&gt; (at the bottom of the file, by default)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save using ctrl+x&#xA;Exit&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo service /etc/init.d/bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl enable bluetooth&#xA;&#xA;sudo systemctl start bluetooth &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="29" LastEditDate="2020-02-25T13:48:28.210" LastActivityDate="2020-02-25T13:48:28.210" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21790" PostTypeId="2" ParentId="21758" CreationDate="2019-12-24T10:07:17.803" Score="1" Body="&lt;p&gt;Contact with the developer on github. &#xA;&lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="12483" LastEditDate="2019-12-25T08:09:57.900" LastActivityDate="2019-12-25T08:09:57.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21792" PostTypeId="1" CreationDate="2019-12-24T12:48:38.760" Score="2" ViewCount="51" Body="&lt;p&gt;I find it annoying when I forget to stop videos before closing my laptop and then having sound played when opening it in public.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to add a script to /lib/systemd/system-sleep:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;amixer -q -D pulse sset Master mute&#xA;&#xA;echo 2 &amp;gt;&amp;gt; /home/user/test&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The script seems to be called when suspending as new lines are being appended to the &quot;test&quot; file (twice - which might indicate that the script also runs on resume - can someone confirm this assumption?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either the sound system re-enables itself automatically or something else is wrong. But the amixer command executed manually works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="16820" LastActivityDate="2019-12-24T12:48:38.760" Title="Mute sound before / after suspeding" Tags="|sound|suspend|script|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21793" PostTypeId="2" ParentId="21766" CreationDate="2019-12-24T13:24:54.333" Score="0" Body="&lt;p&gt;I don't install uncurated stuff from the appcenter, I use apt for that most of the time. I think the uncurated apps are just tons of stuff that works with ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use apt to install any app that is not made for elementary specifically and I also still update via the command line. While I see that Elementary is doing a better job at GUI only then most distros and I think that it is one of the few that can be run GUI everything is just a tat more reliable in the command line.&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2019-12-24T13:24:54.333" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21794" PostTypeId="2" ParentId="21784" CreationDate="2019-12-24T15:14:54.813" Score="0" Body="&lt;p&gt;Also, you might want to try clicking in the &quot;speaker&quot; icon on the top bar of eOS and then click &quot;Sound Settings&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure your preferred and desired sound output is checked as you might have multiple outputs:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/pIbAa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pIbAa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2019-12-24T15:14:54.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21797" PostTypeId="1" CreationDate="2019-12-24T18:48:53.107" Score="0" ViewCount="1734" Body="&lt;p&gt;I just updated my ElementaryOS from Juno to Hera. When I open System Settings and try to open Tweaks. This closes the entire System Settings window and does not open the Tweaks window.&lt;/p&gt;&#xA;" OwnerUserId="19908" LastActivityDate="2022-05-20T08:43:26.280" Title="Elementary Tweaks not working anymore in Hera?" Tags="|updates|release-hera|tweak-tool|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21799" PostTypeId="2" ParentId="21724" CreationDate="2019-12-24T21:23:59.607" Score="1" Body="&lt;p&gt;First Network Manager by default doesn't support L2TP, So first install network-manager-l2tp, Use below steps.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git intltool libtool network-manager-dev libnm-util-dev libnm-glib-dev libnm-glib-vpn-dev libnm-gtk-dev libnm-dev libnma-dev ppp-dev libdbus-glib-1-dev libsecret-1-dev libgtk-3-dev libglib2.0-dev xl2tpd strongswan libnss3-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Issue the following on the command-line (note: the backslash character \ is the shell line continuation character which can safely be copy and pasted):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/nm-l2tp/network-manager-l2tp.git&#xA;cd network-manager-l2tp&#xA;autoreconf -fi&#xA;intltoolize&#xA;&#xA;./configure \&#xA;  --disable-static --prefix=/usr \&#xA;  --sysconfdir=/etc --libdir=/usr/lib/x86_64-linux-gnu \&#xA;  --libexecdir=/usr/lib/NetworkManager \&#xA;  --localstatedir=/var \&#xA;  --with-pppd-plugin-dir=/usr/lib/pppd/2.4.7&#xA;&#xA;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then try to match the encryption info with your windows system where it's working fine, If still doesn't work please post logs here.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2019-12-24T21:23:59.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21800" PostTypeId="1" AcceptedAnswerId="21839" CreationDate="2019-12-24T22:09:59.033" Score="1" ViewCount="369" Body="&lt;p&gt;I have a fresh install of elementary os 5.1 hera. The only thing I am stuck with is trying to get this os to work with my Samsung C480W printer + scanner. The printer works fine but the scanner simply won't connect over a LAN. I have already installed the recommended samsung uld driver and created the required soft links for libsane.so. The same scanner works fine with a laptop running linux mint 19.2 (also based on Ubuntu 18.04 and having the same uld drivers). The only errors I can see are in /var/log/syslog which seem to suggest the scanner details cannot be found in a file called models.dat.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anybody faced and solved a similar problem on elementary? Any help in getting this to work will be quite appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dipak Jha&lt;/p&gt;&#xA;" OwnerUserId="20004" LastActivityDate="2020-01-16T19:05:18.167" Title="Can't connect to scanner" Tags="|release-hera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21801" PostTypeId="2" ParentId="21797" CreationDate="2019-12-24T22:47:21.830" Score="1" Body="&lt;p&gt;You have to update elementary-tweaks package also in order to work with Hera. When the update to Hera was released, elementary tweaks behave like you explain, but after a while it was updated also and now it works as before, only slingshot options for raws and columns are missing, because it was removed from the OS, only 5x3 grid is presented at the moment. Execute &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; into terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another possibillity is that you have set something before the update which is not supported now. I can advice you to &lt;strong&gt;remove all you settings made by elementary-tweaks&lt;/strong&gt; by purging and reinstalling it. In order to do that, execute&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge elemetnary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you do not have purge installed, you can do this by &lt;code&gt;sudo apt install purge&lt;/code&gt;. After purging install it again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-29T15:32:40.463" LastActivityDate="2019-12-29T15:32:40.463" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21802" PostTypeId="2" ParentId="21780" CreationDate="2019-12-24T23:17:43.780" Score="1" Body="&lt;p&gt;The option of custom columns and rows is removed from the slingshot - that's why it is not in dconf editor neighter elementary-tweaks anymore. There are few closed issues on that into github and the new ones appear, but the team is working on another approach wich do not include these keys anymore. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only way I know to achieve this functionality now is to &lt;strong&gt;downgrade the slingshot, which is not recommended&lt;/strong&gt;, but this is what I did because I really miss a bigger apps grid. There is a guide how to achieve this on &lt;a href=&quot;https://hastebin.atvg-studios.com/dobamidivi.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hastebin.atvg-studios.com/dobamidivi.txt&lt;/a&gt; it works flowlessly at the moment, but probably it will brake with the next update of the slingshot. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-24T23:17:43.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21803" PostTypeId="1" CreationDate="2019-12-25T00:58:37.930" Score="0" ViewCount="914" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Failed to open \EFI\BOOT\mmx64.efi - Not Found&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Failed to load image \EFI\BOOT\mmx64.efi: Not Found&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Failed to start MokManager: Not Found&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Somethinghas gone seriously wrong: import_mok_state() failed : Not&#xA;  Found&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;On Acer ES1-512. &#xA;When installed in Legacy mode it boot's and installs with 0 problems. But when I go to shut down or restart - nothing, stays on black screen till I press the power button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Didn't have problems with eOS 5. It was working fine in UEFi mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some other distros are acting the same way - KDE Neon and the latest Mint 19.3 are doing the same for me. But Xubuntu and Lubuntu - both 19.10 for example work perfectly fine in UEFI mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please take a look and find a solution.&lt;/p&gt;&#xA;" OwnerUserId="20006" LastActivityDate="2024-01-05T07:05:35.670" Title="Can't boot eOS 5.1 because of missing mmx64.efi" Tags="|boot|uefi|efi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21804" PostTypeId="1" CreationDate="2019-12-25T02:25:17.943" Score="1" ViewCount="112" Body="&lt;p&gt;I'm running Elementary OS 2.1 Hera. System is AsRock B450M Pro4 with Ryzen 5 2400g CPU, with the Vega graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Booting up, the system only recognises one display. I have two monitors connected, one to the VGA port, the other via HDMI. The system defaults to the VGA monitor. It will use the HDMI if that is the only one connected. However, it will not detect the second monitor when connected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried booting with the monitors plugged in, or plugging them in after boot-up. However, still only detects one monitor. Works fine in Windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help appreciated. Please go easy on me. I have not the most tech savvy.  Thank you!&lt;/p&gt;&#xA;" OwnerUserId="11779" LastEditorUserId="15904" LastEditDate="2020-02-19T16:57:09.433" LastActivityDate="2020-02-19T16:57:09.433" Title="Second Display not Detected" Tags="|display|release-hera|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21805" PostTypeId="2" ParentId="21673" CreationDate="2019-12-25T09:45:41.387" Score="0" Body="&lt;p&gt;Epiphany actually don't support MSE and VP9 codecs which is necessary to play YouTube videos. Probably that is why it does not support videos on Facebook.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-25T09:45:41.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21806" PostTypeId="2" ParentId="13820" CreationDate="2019-12-25T09:59:42.240" Score="1" Body="&lt;p&gt;In my humble opinion, just try to install Firefox from app center or via terminal and use ublock origin and Facebook container plugins in Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get rid of the Epiphany in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge epiphany&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And installed Firefox&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then some clean&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Problem solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way read this thread on reddit,. where is explanation that founders of Elementary OS use chrome. Big LOL.&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/7z0a6b/videos_from_youtube_and_other_sites_not_playing/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Videos from YouTube and other sites not playing properly in Epiphany?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="8517" LastEditDate="2020-05-10T10:29:04.980" LastActivityDate="2020-05-10T10:29:04.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21807" PostTypeId="2" ParentId="21803" CreationDate="2019-12-25T10:11:10.263" Score="0" Body="&lt;p&gt;Boot an Elementary OS Live USB stick, go into your hard disk drive's /boot/efi folder and rename the file grubx64.efi to mmx64.efi. Save. Restart the machine. Check will it boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other possible solutions are here: &lt;a href=&quot;https://askubuntu.com/questions/1085550/cant-install-ubuntu-18-10-on-xps-15-efi-boot-mmx64-efi-not-found&quot;&gt;Can't install Ubuntu 18.10 on XPS 15 - EFI\BOOT\mmx64.efi not found&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-25T10:11:10.263" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21808" PostTypeId="2" ParentId="21800" CreationDate="2019-12-25T10:17:19.023" Score="1" Body="&lt;p&gt;I have found some solutions here: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/hplip/+bug/1744340&quot; rel=&quot;nofollow noreferrer&quot;&gt;&#xA;missing models.dat file &lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One gyu suggested to create a symbolic links with the ls -l command. I do not have this problem with my Canon MG 2550S, however you can use find or locate to find the dat file and make a symbolic link.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2019-12-25T10:17:19.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21809" PostTypeId="2" ParentId="21758" CreationDate="2019-12-25T14:07:23.747" Score="0" Body="&lt;p&gt;I also am looking for a solution but don't see one. It might be possible by modifying Pantheon. But you can try the program 'kmag' (apt install kmag) which creates a window which is zoomed in to your screen. It's not really the same. But you could move it to a second screen which would then be a zoomed in version of your main screen.&lt;/p&gt;&#xA;" OwnerUserId="19832" LastActivityDate="2019-12-25T14:07:23.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21810" PostTypeId="1" CreationDate="2019-12-25T16:48:52.880" Score="1" ViewCount="113" Body="&lt;p&gt;I accidentally changed permissions on /var folder on my os when trying to set up apache. &#xA;Afterwards trying to turn my computer back on it shows the elementary logo then sends me to a black screen with blinking cursor. The screen seems to be stuck can't do anything. CTR ALT DEL sends me back to elementary logo then boots windows&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried changing permissions to default without any luck. Also tried to boot on different  linux generics on recovery mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Been stuck on this for days any help would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Aplology in advance for this not being detailed enough. Don't know much abt os&lt;/p&gt;&#xA;" OwnerUserId="20010" LastActivityDate="2019-12-25T16:48:52.880" Title="Blank screen with blinking cursor when trying to boot" Tags="|black-screen|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21811" PostTypeId="1" AcceptedAnswerId="30105" CreationDate="2019-12-25T17:01:31.023" Score="1" ViewCount="425" Body="&lt;p&gt;I want to set keyboard layout changing on Super (win) button. How can I do this? In system params (I think it called so in English version) there is no Super button in the list of shortcuts.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/jcb0i.jpg&quot; alt=&quot;screenshot&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;os:elementary OS 5.1 Hera&lt;/p&gt;&#xA;" OwnerUserId="20011" LastEditorUserId="84" LastEditDate="2021-07-10T09:41:28.770" LastActivityDate="2023-02-02T10:32:21.520" Title="Change keyboard layout button shortcuts" Tags="|keyboard-shortcuts|release-hera|language|input|keyboard-layout|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21812" PostTypeId="2" ParentId="21455" CreationDate="2019-12-25T20:56:48.720" Score="0" Body="&lt;p&gt;I have managed to achieve hibernation following one guide, but I did some changes noticed into the comments to the post there. Sources are below, but first the steps with the updated (working) for me code:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;1. Edit the hibernation service with&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl edit systemd-hibernate.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;2. Paste the following code&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Service]&#xA;ExecStart=&#xA;ExecStartPre=-/bin/run-parts -v -a pre -a hibernate /lib/systemd/system-sleep&#xA;ExecStart=/usr/sbin/s2disk&#xA;ExecStartPost=-/bin/run-parts -v --reverse -a post -a hibernate /lib/systemd/system-sleep&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save &lt;kbd&gt;Ctr&lt;/kbd&gt;+&lt;kbd&gt;o&lt;/kbd&gt; and exit with &lt;kbd&gt;Ctr&lt;/kbd&gt;+&lt;kbd&gt;x&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;3. Update systemd&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl daemon-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;4. Test if it is working&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl hibernate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the above command the screen should go into terminal view, a counter shows the progress of the disk write into swap partition and computer turns off. When I start it the procedure is like a normal start of the system but there is no login screen (pantheon-greeter) - after the plymouth animation the system is restored to the state with opened windows and settings applied before the hibernation command. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If everything works well for you&lt;/strong&gt; too, you can add this functionality when the lid is closed - edit the logind.conf file, because there is no such an option into System settings - Power anymore:&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;5. Set hibernation on a lid close&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudoedit /etc/systemd/logind.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;find and edit the line at the end of the file with &lt;code&gt;HandleLidSwitch=whatever_you_choosed_from_power_settings&lt;/code&gt;, if there is a comment (a &lt;code&gt;#&lt;/code&gt; sign in front) remove it or just paste below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;HandleLidSwitch=hibernate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;o&lt;/kbd&gt; and &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;x&lt;/kbd&gt; to save and close the file. In order the changes to take effect immediately - &lt;code&gt;sudo service systemd-logind restart&lt;/code&gt; or just reboot the computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried doing the same with suspend-then-hibernate, but if I edit the suspend-then-hibernate.service like this, ofcourse it do not suspend first but immidately hibernates and if I do not edit it but try to execute the &lt;code&gt;systemctl suspend-then-hibernate&lt;/code&gt; command - after the sleep interval it executes the default hibernation process which do not work on my system - it leads to a shutdown with orphaned inodes, which is not nice. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Sources:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;hibernation&lt;/em&gt; - &lt;a href=&quot;https://unix.stackexchange.com/a/386837/355963&quot;&gt;https://unix.stackexchange.com/a/386837/355963&lt;/a&gt; - notice the comments of the post&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;lid close&lt;/em&gt; - &lt;a href=&quot;https://askubuntu.com/a/372616/730454&quot;&gt;https://askubuntu.com/a/372616/730454&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;@zagatta-sonah Thanks for asking this question and sharing your attempt - it inspired me to found at least this functionality I spent days of not successfull tries, because on my system suspend is not nice on a battery power for a long time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If somebody can share how to achieve &lt;strong&gt;suspend-then-hibernate&lt;/strong&gt; the same way it will be really nice, but at least only hibernate is much much better than just suspend. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-26T17:20:20.470" LastActivityDate="2019-12-26T17:20:20.470" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21813" PostTypeId="2" ParentId="17341" CreationDate="2019-12-25T21:06:37.240" Score="0" Body="&lt;p&gt;I do not know how to add it into the menu dropdown, but I have managed to achieve hibernation and set it on the Lid close. Same way if it works for you, you can add it on the powerbutton hit just by edit the appropriate line according to the last title in my answer there - &lt;a href=&quot;https://elementaryos.stackexchange.com/a/21812/12483&quot;&gt;https://elementaryos.stackexchange.com/a/21812/12483&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-25T21:06:37.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21814" PostTypeId="2" ParentId="19569" CreationDate="2019-12-25T21:22:49.733" Score="0" Body="&lt;p&gt;There are a few questions here, the first one - Yes, there is an option for shutdown with the power button press now, you can set it up using System Settings &gt; Power. The hibernate option there is removed because it do not work well on most of the computers by default. I have managed to achieve this with some system tweaks, if you wish to try it first try if your system can hibernate using the default way - execute into terminal console &lt;code&gt;systemctl hibernate&lt;/code&gt; and if it is successfull go into the last titile of my guide in order to make it work on lid close. Otherwise I do not garantee that it will lead you to a success with your system also but if you wish to try - my guide is on &lt;a href=&quot;https://elementaryos.stackexchange.com/a/21812/12483&quot;&gt;https://elementaryos.stackexchange.com/a/21812/12483&lt;/a&gt; . &lt;/p&gt;&#xA;&#xA;&lt;p&gt;About your headphones problem, you better ask another question, because as your title is Hibernate and PowerOff options, only people familiar with the problem there will read your post, but not the people with experience in sound problems and also, StackExchange is a question and answer community and the best way for everyone is different questions to be asked in different posts. It is not a support forum for clients of the elementary OS like you have one for Windows but a community of people who can help each other by sharing their knowledge and experience. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-25T21:32:29.247" LastActivityDate="2019-12-25T21:32:29.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21815" PostTypeId="2" ParentId="21811" CreationDate="2019-12-25T21:45:56.663" Score="0" Body="&lt;p&gt;In elementary OS only the &lt;kbd&gt;Super&lt;/kbd&gt; key can be used eighter to see the System keyboard shortcuts(by default) or to launch the applications menu. There is no easy and troubleless way to set different functionalities then these because the &lt;kbd&gt;Super&lt;/kbd&gt; key is used for core OS functionalities like seeing all applications, multispace view, by default &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; opens the applications menu for example. As you have already found, you can change the keyboard layout shortcut by using System Settings &gt; Keyboard &gt; Layout &gt; Switch Layout and use only the options there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way the elementary OS is built is that you do not have so many options that you can change, if you want to change something because you found it more usefull but it is not implemented into an option - the best way is to post an request issue into &lt;a href=&quot;https://www.github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.github.com/elementary&lt;/a&gt; and if the dev team find a reason to do what you want, they will when they have the time to do it. Sometimes people do some hacks to achieve things, but usually they do not work so well, sometimes they do but it is not for a long, because if the dev team do not give you some option usually the reason is because it will lead to a conflict later because they have some other plans to use it for something else but it is not implemented in the public version of the os yet.   &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-25T22:03:16.973" LastActivityDate="2019-12-25T22:03:16.973" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21816" PostTypeId="2" ParentId="21747" CreationDate="2019-12-25T22:19:25.070" Score="0" Body="&lt;p&gt;Sometimes I have the same problem, but when I switch the system settings to the main tab and return to Background - there is a tumbnail image. Try this, if it do not work, you can post a bug (called an issue there) into &lt;a href=&quot;https://www.github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.github.com/elementary&lt;/a&gt; - just find the appropriate section and follow the rules for posting issues in order the team to take a look on it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I just found out that you are using a different theme then the original. Before you file an issue, check out do you have the same problem with the default theme - sometimes the problems came from using not well written themes.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-25T22:19:25.070" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21817" PostTypeId="1" AcceptedAnswerId="21820" CreationDate="2019-12-26T00:14:38.683" Score="1" ViewCount="433" Body="&lt;p&gt;I am very new to linux. I want to install Private Internet Access VPN app. they have a nice Linux app which works well on Linux Mint. I have now installed Elementary and it's great. But I can't get PIA VPN to install with an APP. Instead I followed the CLI instructions and I now have OpenVPN working, but it's nowhere near as good as the app. I have to enter my password constantly, it doesn't seem to have any kill switch (critical for me), it doesn't replace my default DNS with PIA's DNS, and I can't find an auto connect at startup option. I NEVER want to use my native ISP connection so I want VPN always on. &#xA;I downloaded the PIA run file from here &lt;a href=&quot;https://www.privateinternetaccess.com/installer/x/download_installer_linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.privateinternetaccess.com/installer/x/download_installer_linux&lt;/a&gt; but Elementary can't run the program (.run). Any tips on how to make this install please?&lt;/p&gt;&#xA;" OwnerUserId="20014" LastActivityDate="2019-12-27T14:34:37.867" Title="How to install VPN App" Tags="|vpn|openvpn|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21818" PostTypeId="1" CreationDate="2019-12-26T07:01:14.447" Score="1" ViewCount="30" Body="&lt;p&gt;The nightlight appears to start earlier than the scheduled time. I set it to start at 2AM and end at 5AM but it started about 15 minutes earlier than 2AM. I am using elementaryOS 5.1 Hera. Also experiencing an occasional flicker just like this: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19343/juno-night-light-flickering&quot;&gt;Juno: Night light flickering&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/NtLeG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NtLeG.png&quot; alt=&quot;nightlight manual set time&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on how to fix either of the issues/bugs?&lt;/p&gt;&#xA;" OwnerUserId="20017" LastEditorUserId="20017" LastEditDate="2019-12-26T23:57:06.547" LastActivityDate="2019-12-26T23:57:06.547" Title="Night Light starts earlier than scheduled/set time" Tags="|release-hera|nightlight|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21820" PostTypeId="2" ParentId="21817" CreationDate="2019-12-26T15:27:09.533" Score="2" Body="&lt;p&gt;The file you downloaded is a script. After downloading it, you must mark it as executable and then run it in Terminal.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Right-click on the .run file, and go to &lt;strong&gt;Properties&lt;/strong&gt;. Here, go to the &lt;strong&gt;Permissions&lt;/strong&gt; tab and click on the first &lt;strong&gt;Execute&lt;/strong&gt; button and then &lt;strong&gt;Close&lt;/strong&gt;.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a Terminal window and then drag-and-drop the .run file inside, and press &lt;kbd&gt;Enter&lt;/kbd&gt;. Type your password when prompted.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enjoy PIA VPN!&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RUd0t.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RUd0t.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2019-12-26T15:27:09.533" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21821" PostTypeId="1" AcceptedAnswerId="21823" CreationDate="2019-12-26T16:00:15.777" Score="3" ViewCount="3762" Body="&lt;p&gt;I am a hardware engineer working with Microcontrollers and analog circuits.&lt;/p&gt;&#xA;&lt;p&gt;To understand the software part, I have been reading the materials available online.&lt;/p&gt;&#xA;&lt;p&gt;I came across various terminologies like operating system, kernel and bootloader.&lt;/p&gt;&#xA;&lt;p&gt;I looked up the definition of all those but I want to understand where each is used and in what context it should be understood.&lt;/p&gt;&#xA;&lt;p&gt;Please help me understand the below terms (if possible, their origin also would help) :&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Kernel&lt;/li&gt;&#xA;&lt;li&gt;Bootloader&lt;/li&gt;&#xA;&lt;li&gt;Operating System&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;An analogy or a simple explanation would help a lot. Please keep it simple as I am a hardware person with little software knowledge&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT :&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thank you for the answers. I still don't get some points in your answer. But I forgot to show my work. I think if I show my level of understanding through my work,it would be better to tailor your answers with respect to my level of understanding and also whether my understanding is correct or not.&lt;/p&gt;&#xA;&lt;p&gt;My understanding :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cjrxf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cjrxf.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;From what I learnt through the electronics stackexchange and other online notes, I understood that, some configuration is already stored in the NOR Flash mentioned in the above image. (I don't know what the configuration they are talking about)&lt;/p&gt;&#xA;&lt;p&gt;Upon power-up, the configuration gets loaded from the NOR Flash to the processor (or from any other interface to the processor, depending upon the resistor configuration R1,R2 and like that)&lt;/p&gt;&#xA;&lt;p&gt;Once, the configuration is loaded into the processor, the configuration tells then, to get the codes that are stored in the NAND Flash and then bring them to the RAM Memory (DDR) for random and quick access.&lt;/p&gt;&#xA;&lt;p&gt;Is my above understand is correct? And if its correct, please tell me where is the bootloader stored and where is the kernel located? Since, both together are the parts of the Operating system, where will the code for the operating system be located in the IC ?&lt;/p&gt;&#xA;" OwnerUserId="20022" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2019-12-27T08:14:02.043" Title="Distinction between Operating System, Kernel and Bootloader" Tags="|boot|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21822" PostTypeId="2" ParentId="21821" CreationDate="2019-12-26T17:29:07.223" Score="4" Body="&lt;p&gt;First I'll simplify your question Because Kernel and Bootloader are both parts of the Operating System.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, let's talk about Kernel: To understand work of kernel I'll assume you've basic knowledge about how computer works I mean How it processes 0 and 1. Because CPU of Computer only understands Binary 0 and 1. I'll assume you know the C language and you're familiar with how to compile your human-readable program to Binary. and Memory Management.&#xA;Now a little more how program works: You store a program in Disk but when you run it uses RAM(Temporary Memory), This is where Kernel a heart of OS comes in place which decides which portion of memory(Bits) to allocate to run a certain program, In short Kernal handles Memory allocation, Processor scheduling and Input/Output management in layman's term it works as interpreter which converts all your commands/actions to Binary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now Let's talk about Bootloader, Again as I said when your computer is turned off your program is stored in the specific place of Hard Disk, When you start computers that program(Kernel) have to use RAM memory to execute the program, Boot process just simply tells a computer the location of the program(Kernel). Normally it's a tiny bootstrap program.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is Simple OS architecture which you'll understand which one play their role at where:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/muITn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/muITn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17867" LastEditorUserId="17867" LastEditDate="2019-12-26T17:38:14.687" LastActivityDate="2019-12-26T17:38:14.687" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21823" PostTypeId="2" ParentId="21821" CreationDate="2019-12-26T17:30:08.430" Score="5" Body="&lt;p&gt;In addition to the three you listed a fourth part of the system also plays an important role. The BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Each piece of software transitions a computer from power off to a functional system starting from the lowest level and progressing toward the software interface that you interact with. The order of execution is:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;BIOS (Basic Input Output System) - This software is said to be close to the metal or hardware (GPU, RAM, hard drive, etc...). It runs checks on all these components and prepares them for use by the higher level software. The BIOS is firmware which is to say that it typically resides in a computer chip and not on your hard drive. It is not part of the Operating System. It does not care if you are booting Linux, Windows, or mac OS.&lt;/li&gt;&#xA;&lt;li&gt;Bootloader - When the BIOS finishes it's work it looks for and passes control to the bootloader which resides on your hard drive. The bootloader then looks for bootable Kernels which are also on your hard drive (we'll get to this). It may find more than one and it typically gives you the option to choose which one you want to boot. The bootloader is part of the Operating System. The most commonly used bootloader in the Linux community is GRUB. Even though bootloaders are part of the operating system they often have the capability of booting other operating systems.&lt;/li&gt;&#xA;&lt;li&gt;Kernel - The kernel handles the interface between the software that you use and the hardware resources that the software uses. It manages the use of the CPU to ensure that multiple tasks can be executed in parallel, it also deals with writing and reading data from your RAM and hard drive, the GPU for rendering to your monitor, etc...&lt;/li&gt;&#xA;&lt;li&gt;Operating System - The Bootloader, Kernel, drivers that the kernel uses to talk to your specific hardware, software that is used in the background (automated backup, power management, virus scanners, etc..), and all of the software that you use in your day to day work or pleasure.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;EDIT: On a laptop and desktop computer the BIOS is typically stored on a non-volatile ROM chip which would roughly be the equivalent of the NOR flash in your diagram. It's reasonable to think that the NOR flash in your microcontroller diagram would contain the equivalent of the BIOS (if necessary) and bootloader. The kernel and remaining software would be loaded from the NAND flash into RAM for execution by the processor. The NAND flash in this scenario is roughly the equivalent of a hard disk drive (HDD) or solid state drive (SSD) in a laptop or desktop computer. To answer your question regarding loading the OS desktop, once the kernel finishes the boot process it triggers a startup process that takes care of loading the background processes and ultimately the desktop or other user interface.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2019-12-27T08:14:02.043" LastActivityDate="2019-12-27T08:14:02.043" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21825" PostTypeId="1" AcceptedAnswerId="21830" CreationDate="2019-12-26T21:12:16.487" Score="0" ViewCount="145" Body="&lt;h2&gt;The Issue&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;How do I change the default folder where (whole screen) screenshots are saved when &lt;code&gt;print&lt;/code&gt; key is pressed? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;By default, it is set to &lt;code&gt;~/Pictures/Screenshots/&lt;/code&gt; but I want to specify another path.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;A failed attempt&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;With &lt;code&gt;dconf-editor&lt;/code&gt;, I specified the value of &lt;code&gt;folder-dir&lt;/code&gt; to a different path but it didn't work: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x2onF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x2onF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apparently, &lt;code&gt;folder-dir&lt;/code&gt; sets the default folder path which appears in the following dialog box after a screenshot is taken using &lt;code&gt;screenshot&lt;/code&gt; app:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PWwDm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PWwDm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;An outdated answer&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;This answer (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/5470/20018&quot;&gt;https://elementaryos.stackexchange.com/a/5470/20018&lt;/a&gt;) is outdated since &lt;code&gt;gnome-screenshot&lt;/code&gt; is not being used for current elementary OS 5.1.&lt;/p&gt;&#xA;" OwnerUserId="20018" LastActivityDate="2019-12-27T02:09:06.020" Title="How to change default folder for saving screenshots?" Tags="|screenshot|folder|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21826" PostTypeId="1" CreationDate="2019-12-26T23:16:17.957" Score="1" ViewCount="45" Body="&lt;p&gt;I had been using Elementary 5.1 for the last two weeks on a System76 desktop/workstation. The system is fully updated/patched. For some unknown reason the system is going into sleep/suspend even when I had setup power options to ignore suspend. Defaults are suited for laptops, but for a workstation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to set this up. I had tried changing my settings and the lightdm user settings without any actual effect on this issue.&lt;/p&gt;&#xA;" OwnerUserId="20024" LastEditorUserId="15904" LastEditDate="2020-02-19T16:57:28.013" LastActivityDate="2020-02-19T16:57:28.013" Title="Elementary 5.1 not respecting power options on desktop/workstation" Tags="|system|release-hera|suspend|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21828" PostTypeId="2" ParentId="14335" CreationDate="2019-12-27T00:35:05.710" Score="1" Body="&lt;p&gt;unfortunately there's no way to mount iOS devices on Linux anymore for some time. At least not any that I'm aware of. I just use icloud/apple photos to access my images. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2019-12-27T00:35:05.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21830" PostTypeId="2" ParentId="21825" CreationDate="2019-12-27T02:03:38.400" Score="0" Body="&lt;p&gt;It looks like the screenshot app location and the one of the &lt;kbd&gt;prt sc&lt;/kbd&gt; button command are different. In order to achieve what you need I can recommend you to use the Files application, navigate to the parrent folder of the one you want to store the screenshots automatically, right click on the folder you want the screenshots to be stored and select &lt;strong&gt;Copy as Link&lt;/strong&gt;. Open the Pictures folder, right click inside, choose &lt;strong&gt;Paste Link&lt;/strong&gt; there and &lt;strong&gt;rename&lt;/strong&gt; the link to Screenshots.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-27T02:09:06.020" LastActivityDate="2019-12-27T02:09:06.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21833" PostTypeId="2" ParentId="5384" CreationDate="2019-12-27T12:39:35.797" Score="2" Body="&lt;p&gt;Here's how I managed to get screenshots (taken with the Print key) stored in the Downloads folder. Bit of a cheat but works. elementary OS 5.1 Hera.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cd ~/Pictures&#xA;$ rmdir Screenshots&#xA;$ ln -s ~/Downloads Screenshots&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20033" LastActivityDate="2019-12-27T12:39:35.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21835" PostTypeId="2" ParentId="21817" CreationDate="2019-12-27T14:34:37.867" Score="0" Body="&lt;p&gt;Wow, what a great answer thank you!&#xA;Will this show it in AppCenter afterwards or will I need to run it from Terminal every time?&#xA;I have installed it. It shows on dock but it behaves funny. PIA on Mac/Win/Mint will have an icon in notification/clock/statusbar type areas, showing green or red depending on whether it's connected or not. I can't seem to make that happen in Elementary. I have adjusted all options in PIA (show in system tray is the one usually) but it still doesn't show. I can manage with it as i use the kill switch so I will know if the VPN drops as I won't be able to visit any websites, but I just mention it in case you know of a way to make it show on top right area. Thanks again, great help&lt;/p&gt;&#xA;" OwnerUserId="20014" LastActivityDate="2019-12-27T14:34:37.867" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21837" PostTypeId="1" CreationDate="2019-12-27T20:07:24.693" Score="0" ViewCount="136" Body="&lt;p&gt;I successfully connected my webdav cloud storage in elementary OS files manager. But if I copy for example my passwort database from home directory to the webdav directory, my passwort manager can't save anymore the database. I compared in the properties tab the permissions. In the home directory I'm the owner and have read and write permissions. If I copy the same file to my webdav resource I loose all permissions and I'm not anymore the owner of the file. &#xA;I don't understand how this is possible that I can write the file to the webdav server but can't modifiy it anymore afterwards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I search through the web but don't find any solution until now.&#xA;Any ideas / hints?&lt;/p&gt;&#xA;" OwnerUserId="19863" LastActivityDate="2019-12-27T20:07:24.693" Title="all files on WebDav resource are write protected" Tags="|pantheon-files|files|release-hera|webdav|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21838" PostTypeId="1" CreationDate="2019-12-27T20:15:38.357" Score="0" ViewCount="139" Body="&lt;p&gt;I'm searching for a solution to show thumbnails of photo raw data (~15 MB in size) from samba sever (remote files on a NAS) in pantheon files . I guess the issue is the file size. How can I edit the standard settings? It works fine with JPEG files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed caja to test NEF thumbnails and it workes like a charme only by editing the settings to &quot;show all&quot; and &quot;files smaller than 100 MB only&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to change something in /etc/xdg/tumbler/tumbler.rc?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# RAW image files using libopenraw&#xA;[RawThumbnailer]&#xA;Disabled=false&#xA;Priority=1&#xA;Locations=&#xA;MaxFileSize=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tumbler and tumbler-plugins-extra are installed.&lt;/p&gt;&#xA;" OwnerUserId="19786" LastActivityDate="2019-12-27T20:15:38.357" Title="showing thumbnails of remote raw files" Tags="|pantheon-files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21839" PostTypeId="2" ParentId="21800" CreationDate="2019-12-27T21:47:51.993" Score="0" Body="&lt;p&gt;Thanks for trying to help. I finally found a solution here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://linux.tutorialforbeginners.net/2018/10/08/samsung-printer-driver-ubuntu-18-04-installation-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linux.tutorialforbeginners.net/2018/10/08/samsung-printer-driver-ubuntu-18-04-installation-guide/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed these instructions step by step and now have a system that seamless connects to the C48 series Samsung scanner and correctly scans documents. The error about details not being found in models.dat turns out to be a red herring since I can still see the warnings in syslog despite the system happily scanning away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But must say this has been a rather painful journey with a massive amount of effort having been invested in solving a seemingly simple issue. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Dipak Jha &lt;/p&gt;&#xA;" OwnerUserId="20004" LastActivityDate="2019-12-27T21:47:51.993" CommentCount="0" CommunityOwnedDate="2019-12-27T21:47:51.993" ContentLicense="CC BY-SA 4.0" />
  <row Id="21840" PostTypeId="1" CreationDate="2019-12-27T22:50:36.420" Score="0" ViewCount="95" Body="&lt;p&gt;I have installed the flatpak version of evince, and because it is the former elementary document viewer it looks like the flatpak version takes the responsability of creating thumbnails, but while I browse files with the pantheon files application, the processor overheats if there are a lot of files into the folder, and &lt;code&gt;dmesg&lt;/code&gt; command always returns a lot of lines like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;audit: type=1400 audit(1577484935.935:59): apparmor=&quot;DENIED&quot; operation=&quot;open&quot; profile=&quot;/usr/bin/evince-thumbnailer&quot; name=&quot;/var/lib/flatpak/exports/share/mime/mime.cache&quot; pid=25977 comm=&quot;evince-thumbnai&quot; requested_mask=&quot;r&quot; denied_mask=&quot;r&quot; fsuid=1001 ouid=0&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe I am wrong, but it looks like apparmor denies evince to accept the mimecache file and as a result all thumbnails are recreated every time I open the folder - if there are a lot of images in it I can see them with the default jpg icon for a while following the thumbnail previews. Uninnstalling the flatpak version of the app do not remove the problem - I can see new similar lines when I type dmesg into terminal, always incliding the flatpak mime.cache path while I am browsing with the pantheon files application. It looks like there are two options - &#xA;&lt;strong&gt;1. To change the system thumbnailer program to be the default Document viewer&lt;/strong&gt; or &lt;strong&gt;2. to configure apparmor to grant access to the flatpak version to the mime.cache file&lt;/strong&gt; but I do not know how to achieve neighter one of both. Anybody can help?&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-27T22:50:36.420" Title="Icon cache problem after installing flatpak version of evince" Tags="|pantheon-files|mimetype|flatpak|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21842" PostTypeId="1" CreationDate="2019-12-28T04:56:58.567" Score="0" ViewCount="95" Body="&lt;p&gt;I have been heard that Lenovo devices commonly face the WiFi issue in Ubuntu. Is the same problems are there in Elementry OS? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you. I have tried the way in &lt;strong&gt;GitHub&lt;/strong&gt; but it is not working well. Still, I can't connect WiFi or use it. &lt;strong&gt;This says there are no device for wifi&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you guys can solve this issue that would be a great help for Linux lovers like me.&lt;/p&gt;&#xA;" OwnerUserId="20041" LastActivityDate="2019-12-28T04:56:58.567" Title="WiFi issue on Elementary OS Lenovo" Tags="|wifi|networking|lenovo|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21843" PostTypeId="1" CreationDate="2019-12-28T10:32:02.193" Score="0" ViewCount="218" Body="&lt;p&gt;Normally saving new files goes into the contextually appropriate folder. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, when I use Sublime Text, and I click on one of the folders in my project in the sidebar, choose &lt;code&gt;New file&lt;/code&gt;, then go to save that file with &lt;code&gt;Ctrl+S&lt;/code&gt;, it should by default offer the folder on which i clicked, when asking me to enter the name of the new file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But in Elementary, the default folder in which it offers to save the file in this case, will be the latest viewed folder that i had open the last time the file browser was used. So if i last opened a song from &lt;code&gt;~/Music&lt;/code&gt;, then it'll offer my &lt;code&gt;~/Music&lt;/code&gt; folder for saving the file from Sublime, regardless that that's not even inside my project.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it doesn't seem to be the Pantheon Files' latest used directory... but the save/open dialog component itself. Like, if i were to browse to a file in my documents using Pantheon Files, let's say &lt;code&gt;~/Documents/file.txt&lt;/code&gt;, click on it to edit it in Code, then do &lt;code&gt;Ctrl+Shift+S&lt;/code&gt; to save, it won't offer &lt;code&gt;~/Documents&lt;/code&gt; (where Pantheon Files was last pointed to), but it will open the last location of the open/save dialog (in my example, the &lt;code&gt;~/Music&lt;/code&gt; directory).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I have no idea if this is even connected to Pantheon Files, or the save/open dialog uses something else, and I don't see anyone else complaining about this issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how would i go about fixing this behaviour?&lt;/p&gt;&#xA;" OwnerUserId="3603" LastActivityDate="2022-07-30T21:01:00.057" Title="The File Browser dialog always opens last viewed folder, instead of contextually appropriate location" Tags="|pantheon-files|files|file-management|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21845" PostTypeId="1" AcceptedAnswerId="21846" CreationDate="2019-12-28T15:26:05.943" Score="0" ViewCount="416" Body="&lt;p&gt;I'm a new user, but I don't understand why apps like LibreOffice and Gimp on AppCenter are far away from the current version.&#xA;Every time I want something current I have to go to the developer's own site and it's very inconvenient :/&lt;/p&gt;&#xA;" OwnerUserId="20020" LastActivityDate="2020-01-01T17:24:52.820" Title="Why are apps out of date in the App Center?" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21846" PostTypeId="2" ParentId="21845" CreationDate="2019-12-28T15:48:53.817" Score="0" Body="&lt;p&gt;That might be because those non-curated apps come from the Ubuntu apt repositories. Elementary OS is based on a Ubuntu LTS release which in turn is based on Debian Testing at the time of the release.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the time of writing the Elementary OS 5.x is based on &lt;a href=&quot;https://wiki.ubuntu.com/BionicBeaver/ReleaseNotes/18.04&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu 18.04 LTS&lt;/a&gt;, released in October 2018, which came with the &lt;a href=&quot;https://help.gnome.org/misc/release-notes/3.28/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME 3.28&lt;/a&gt; desktop environment and associated apps like GIMP that you mention. This may explain the outdated, non-curated apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Having said that: I do see the latest versions of many apps in the AppCenter however as well as outdated ones. &lt;a href=&quot;https://www.gimp.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GIMP&lt;/a&gt; has both 2.10.14 (current release) and the 2.8.22 versions at the time of writing. The more up-to-date one must be &lt;a href=&quot;https://flatpak.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;a Flatpak&lt;/a&gt; from &lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary's custom Flatpak-repositories&lt;/a&gt;. The flatpaks are usually up-to-date with the latest version of the developers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The same goes for LibreOffice: the latest version is available in the AppCenter as is an older version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are not seeing those up-to-date apps in the AppStore first check if you are using the &lt;a href=&quot;https://blog.elementary.io/introducing-elementary-os-5-1-hera/&quot; rel=&quot;nofollow noreferrer&quot;&gt;latest version of Elementary OS&lt;/a&gt;. You need to be on Elementary OS 5.1 (Hera) to get the flatpaks in the AppCenter. If so, try updating the repositories. Right-click on the AppCenter icon and &quot;Check for updates&quot; or update the repositories from a terminal (&lt;strong&gt;Super+T&lt;/strong&gt;):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then check the AppCenter again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also get flatpaks from &lt;a href=&quot;https://www.flathub.org/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt; but that is not the &quot;official&quot; way to get apps in Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Correction&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently learned that the flatpaks that I see in the AppCenter are actually from Flathub. They got in there because I once &quot;sideloaded&quot; an app from Flathub.org which then adds that repository to Elementary's store.&lt;/p&gt;&#xA;" OwnerDisplayName="user15979" LastEditorDisplayName="user15979" LastEditDate="2020-01-01T17:24:52.820" LastActivityDate="2020-01-01T17:24:52.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21847" PostTypeId="2" ParentId="21845" CreationDate="2019-12-28T16:03:49.613" Score="0" Body="&lt;p&gt;Flatpak has current versions of the apps you mentioned and a lot more and support in elementary is seamless. See the install instructions &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21751/appcenter-current-versions-of-apps/21755#21755&quot;&gt;here&lt;/a&gt;. Instead of Thunderbird or Evolution as mentioned in the linked guide install Gimp or LibreOffice to enable support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary does not yet have their own Flatpak repo hence the reason why Flatpak apps do not show up in the AppCenter by default. A custom repo was their original intent and may be something introduced in the future (&lt;a href=&quot;https://blog.elementary.io/elementary-appcenter-flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;as documented in April, 2019&lt;/a&gt;). As for now elementary created the sideload application (&lt;a href=&quot;http://Elementary%20does%20not%20yet%20have%20their%20own%20Flatpak%20repo%20hence%20the%20reason%20why%20Flatpak%20apps%20do%20not%20show%20up%20in%20the%20AppCenter%20by%20default.%20A%20custom%20repo%20was%20their%20original%20intent%20and%20may%20be%20something%20introduced%20in%20the%20future%20(as%20outlined%20in%20the%20document%20you%20linked).%20As%20for%20now%20elementary%20created%20the%20sideload%20application%20()%20which%20will%20allow%20you%20to%20install&quot; rel=&quot;nofollow noreferrer&quot;&gt;see the more recent blog post&lt;/a&gt;) which will allow you to install files downloaded from other repositories (flathub is the biggie, &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;see the official flatpak install guide submitted by the elementary OS team&lt;/a&gt;) by downloading and installing one .flatpakref file which will add all applications from that repo to the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2019-12-28T17:47:39.327" LastActivityDate="2019-12-28T17:47:39.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21849" PostTypeId="1" CreationDate="2019-12-28T16:38:51.770" Score="1" ViewCount="578" Body="&lt;p&gt;The problem I'm encountering appeared identical to this one:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21411/appcenter-complains-and-doesnt-work-to-install-anything&quot;&gt;AppCenter complains and doesn&amp;#39;t work to install anything&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, the fix used there, i.e. removing and reinstalling the appcenter, did not work for me. The contents of &lt;code&gt;appcenter.list&lt;/code&gt;, &lt;code&gt;elementary.list&lt;/code&gt; and &lt;code&gt;patches.list&lt;/code&gt; are all identical to those in the above-cited question. Since the &quot;details&quot; says it's an authentication problem, I doubt this is due to a problematic repository, but for the record here are the files in my own &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; directory:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;appcenter.list&#xA;appcenter.list.save&#xA;elementary.list&#xA;elementary.list.save&#xA;eugenesan-ubuntu-ppa-bionic.list&#xA;fingerprint-ubuntu-fingerprint-gui-bionic.list&#xA;fingerprint-ubuntu-fingerprint-gui-bionic.list.save&#xA;patches.list&#xA;patches.list.save&#xA;philip_scott-ubuntu-elementary-tweaks-bionic.list&#xA;philip_scott-ubuntu-elementary-tweaks-bionic.list.save&#xA;phoerious-ubuntu-keepassxc-bionic.list&#xA;phoerious-ubuntu-keepassxc-bionic.list.save&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;All help will be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="19360" LastEditDate="2020-01-01T05:52:21.603" LastActivityDate="2020-01-01T05:52:21.603" Title="AppCenter Fails to Fetch Updates, Failed to obtain authentication" Tags="|updates|appcenter|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21853" PostTypeId="2" ParentId="21788" CreationDate="2019-12-29T10:21:07.820" Score="1" Body="&lt;p&gt;&lt;strong&gt;This fix is surely dirty, but it worked for me&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to resolve my problem;&lt;br&gt;&#xA;The problem was libpulse0 which has been upgraded to the version 7.5 while the required version was the 7.4.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've reinstalled the 7.4 version:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt install libpulse0=1:11.1-1ubuntu7.4&lt;br&gt;&#xA;  sudo apt-mark hold libpulse0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;(apt-mark hold is used to prevent the upgrade of libpulse0 in the future)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, when I restarted my laptop i could no longer login (session returned 1), so I installed &quot;pantheon-xsession-settings&quot; (press ctrl+alt+f1 to enter in the terminal mode), rebooted and everything worked fine. (and so the bluetooth)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the installation of libpulse0 v7.4 removed some important packages, that's why I had to install &quot;pantheon-xsession-settings&quot;&lt;/p&gt;&#xA;" OwnerUserId="19995" LastActivityDate="2019-12-29T10:21:07.820" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21855" PostTypeId="2" ParentId="21843" CreationDate="2019-12-29T11:50:35.833" Score="0" Body="&lt;p&gt;For &lt;strong&gt;Sublime Text&lt;/strong&gt; I can recommend you to install via &lt;strong&gt;Package Control&lt;/strong&gt; the &lt;strong&gt;AdvancedNewFile&lt;/strong&gt; - it gives you the option to create new files into the folder location you are working in. I do not know what experince do you have, but without this package it always prompt me to save the file into the default folder location not only on elementary OS pantheon-files, but also using Nautilus in Ubuntu, it was the same long time ago with the sublime text (2) version I was using on Snow Leopard OSX. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-29T11:56:31.693" LastActivityDate="2019-12-29T11:56:31.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21856" PostTypeId="1" CreationDate="2019-12-29T13:06:26.870" Score="1" ViewCount="496" Body="&lt;p&gt;I would like to keep &lt;code&gt;wingpanel&lt;/code&gt; transparency on maximized windows (in order to display my current wallpaper). Is it possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards&lt;/p&gt;&#xA;" OwnerUserId="20056" LastEditorUserId="16827" LastEditDate="2020-01-01T05:55:15.097" LastActivityDate="2020-06-29T16:02:30.350" Title="Set wingpanel transparency" Tags="|wingpanel|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21858" PostTypeId="2" ParentId="21843" CreationDate="2019-12-29T14:25:12.683" Score="1" Body="&lt;p&gt;The file chooser stores its last used folder when it closes and re-opens in the same place initially.  I do not think the file-chooser can itself determine the context of the calling app - it is up to the app to set the appropriate path by calling the set_uri () function.  I notice that both Code and Photos suffer from the same problem. Looking code in Code, it use Gtk.FileChooserNative portal rather than a native Gtk.FileChooser and does attempt to set the path appropriately. I have a feeling that you cannot set the filechooser folder using the portal.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="3911" LastEditDate="2019-12-29T14:34:55.807" LastActivityDate="2019-12-29T14:34:55.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21863" PostTypeId="1" AcceptedAnswerId="22531" CreationDate="2019-12-29T22:57:48.783" Score="0" ViewCount="544" Body="&lt;p&gt;this is a similar issue to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/20921/404-not-found-error-while-running-apt-and-appstore-eos-juno&quot;&gt;this&lt;/a&gt; question by me.  I just got a fresh install of EOS 5.1, so I am starting from scratch. I am trying to get Elementary Tweaks so I can install a custom theme, but when I try to add the repository I get this issue: &lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$  sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; system settings panel for elementary OS that lets you easily and safely customise your desktop's appearance  https://github.com/elementary-tweaks/elementary-tweaks&#xA; More info: https://launchpad.net/~philip.scott/+archive/ubuntu/elementary-tweaks&#xA;Press [ENTER] to continue or Ctrl-c to cancel adding it.&#xA;&#xA;Hit:1 http://packages.elementary.io/appcenter bionic InRelease&#xA;Hit:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                                                 &#xA;Hit:3 http://us.archive.ubuntu.com/ubuntu bionic InRelease                                                                                              &#xA;Get:4 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]                                                                            &#xA;Get:5 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]                                                           &#xA;Ign:6 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic InRelease                                                           &#xA;Get:7 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]      &#xA;Hit:8 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                                                 &#xA;Get:9 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease [15.9 kB]&#xA;Err:10 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Get:11 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic/main amd64 Packages [820 B]&#xA;Get:12 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic/main i386 Packages [828 B]&#xA;Get:13 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic/main Translation-en [304 B]&#xA;Reading package lists... Done                        &#xA;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It is giving similar error messages to the other question. Is this because there is not yet a tweaks version for EOS 5.1 Hera???&#xA;Any help is appreciated. I don't know if I should mention this on the Elementary Tweaks GitHub page or what. Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the README on the GitHub page, and it says it's for EOS Juno. I thought this would work because Hera is just an update to Juno, not an entirely new copy. Oh, well.&lt;/p&gt;&#xA;" OwnerUserId="19134" LastEditorUserId="15904" LastEditDate="2020-02-19T16:57:18.947" LastActivityDate="2020-02-23T13:43:58.303" Title="404 NOT FOUND adding tweaks" Tags="|release-hera|apt|tweak-tool|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21864" PostTypeId="1" AcceptedAnswerId="21879" CreationDate="2019-12-30T03:22:42.800" Score="0" ViewCount="637" Body="&lt;p&gt;I have seen how to remove the plank icon from the dock, but I don't really know how the syntax of this works and therefore don't know how to replicate it to something else. I recently installed Desktop Folder from the App Store since it adds features of MacOS (which I have come from) but I don't want the icon to always be there. Does anyone know how to help? Thanks in advance!w&lt;/p&gt;&#xA;" OwnerUserId="19134" LastActivityDate="2019-12-31T00:36:14.427" Title="How to remove open icon from plank" Tags="|desktop|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21865" PostTypeId="1" CreationDate="2019-12-30T03:47:37.650" Score="0" ViewCount="232" Body="&lt;p&gt;I have an MSI Modern 14 A10RB that has an Intel® 9560 wireless adapter. While Debian and Ubuntu are able to recognize it without installing any firmware, this does not happen with Elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to install the firmware according to Intel instructions (&lt;a href=&quot;https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded and unzipped it in the / lib / firmware folder. But it still doesn't work. Could it be that I am failing something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks so much for your help!&lt;/p&gt;&#xA;" OwnerUserId="20063" LastActivityDate="2024-01-09T18:02:55.323" Title="Intel® Wireless-AC 9560" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21866" PostTypeId="1" CreationDate="2019-12-30T05:18:41.647" Score="0" ViewCount="20" Body="&lt;p&gt;Grub start to look like that. Just visual, don't have any functional problem.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/r6NTX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r6NTX.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19909" LastActivityDate="2019-12-30T05:18:41.647" Title="Grub Visual Error" Tags="|grub|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="21867" PostTypeId="2" ParentId="18947" CreationDate="2019-12-30T07:28:43.013" Score="2" Body="&lt;p&gt;Try this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo nano /etc/systemd/system.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and edit as the image then run&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/riaxo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/riaxo.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;uncommented (remove the &quot;#&quot;) the fields above to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DefaultTimeoutStopSec=9s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then run this command to reload&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;systemctl daemon-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you find it still not working, set StartSec to 9s&lt;/p&gt;&#xA;" OwnerUserId="19745" LastEditorUserId="8319" LastEditDate="2020-01-24T12:56:22.337" LastActivityDate="2020-01-24T12:56:22.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21868" PostTypeId="2" ParentId="19192" CreationDate="2019-12-30T09:43:01.977" Score="0" Body="&lt;p&gt;I have a Matebook D too, and mine do the same beahaviors than you. I don't think it's important, as far as I remember it has always done that, and it never appears apart of the boot.&lt;/p&gt;&#xA;" OwnerUserId="19995" LastActivityDate="2019-12-30T09:43:01.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21869" PostTypeId="1" AcceptedAnswerId="21883" CreationDate="2019-12-30T09:48:33.237" Score="1" ViewCount="74" Body="&lt;p&gt;My sound works fine (I can control it with the keyboard and hear the music), but there is no longer an icon in the topbar or in the settings.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm pretty sure it's related to the fact that I installed an older version of libpulse0 and it removed a lot of packages, but I don't know which package I should reinstall to have my sound settings back.&lt;/p&gt;&#xA;" OwnerUserId="19995" LastActivityDate="2019-12-31T10:09:44.070" Title="No sound icon in parameters or topbar" Tags="|settings|wingpanel|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21871" PostTypeId="1" AcceptedAnswerId="21872" CreationDate="2019-12-30T17:14:53.777" Score="0" ViewCount="85" Body="&lt;p&gt;&lt;strong&gt;Backstory:&lt;/strong&gt; I installed Eclipse SDK as in Windows 10, I use this software and use it. Eclipse broke and I wanted to reinstall. But uninstalling resulted in an error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Problem:&lt;/strong&gt; I wanted to uninstall the flatpak but it resulted in this error. Can you help fix this error, I want to reinstall it as Eclipse is super broken and I can't use it to make my Minecraft plugin I make on my free time.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Application state not set as installed in AppCenter for package: Eclipse SDK&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19933" LastActivityDate="2019-12-30T18:43:07.020" Title="Error with uninstalling Eclipse SDK when it is bugged" Tags="|release-hera|sideload|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21872" PostTypeId="2" ParentId="21871" CreationDate="2019-12-30T18:43:07.020" Score="0" Body="&lt;p&gt;Open your terminal application, and run first &lt;code&gt;flatpak list&lt;/code&gt;. This command should list all flatpak installed applications. Notice the name of eclipse there and run &#xA;&lt;code&gt;flatpak uninstall name_of_eclipse&lt;/code&gt; or &lt;code&gt;flatpak remove name_of_eclipse&lt;/code&gt;. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-30T18:43:07.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21873" PostTypeId="1" CreationDate="2019-12-30T20:13:12.097" Score="3" ViewCount="1547" Body="&lt;p&gt;For example, &lt;code&gt;LibreOffice&lt;/code&gt; is available from &lt;code&gt;FlatHub.org&lt;/code&gt;. So, I can install it with &lt;code&gt;sideload&lt;/code&gt;. But I can also install it via the &lt;code&gt;appcenter&lt;/code&gt; (&lt;code&gt;flatpak&lt;/code&gt; search, strangely enough, doesn't find it).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which of these options should I prefer in general?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="11882" LastEditDate="2020-01-01T06:03:11.523" LastActivityDate="2020-01-01T06:03:11.523" Title="What's the advantage to using sideload over flatpak over the appcenter?" Tags="|appcenter|sideload|flatpak|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21874" PostTypeId="1" CreationDate="2019-12-30T20:18:47.687" Score="0" ViewCount="58" Body="&lt;p&gt;In AppCenter when I click to download a piece of software, it does this: &quot;starting.. waiting...&quot; then nothing. It doesn't install or anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="20073" LastActivityDate="2019-12-30T20:18:47.687" Title="Unable to install anything from AppCenter" Tags="|appcenter|apps|install|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21875" PostTypeId="2" ParentId="21873" CreationDate="2019-12-30T21:29:54.933" Score="0" Body="&lt;p&gt;I would simply use &lt;code&gt;apt-get install libreoffice&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;KISS - Keep it Simple Stupid!&lt;/p&gt;&#xA;" OwnerUserId="20075" LastEditorUserId="16827" LastEditDate="2019-12-31T05:18:29.827" LastActivityDate="2019-12-31T05:18:29.827" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21876" PostTypeId="2" ParentId="21873" CreationDate="2019-12-30T22:41:16.890" Score="5" Body="&lt;p&gt;After you install a Flatpak app via sideload then all apps from the Flatpak repo you downloaded it from (flathub.org) will show up in AppCenter so you shouldn't need to use sideload for subsequent apps from the same repo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Personally I prefer installing Flatpak apps on elementary OS if you have the room on your HDD/SSD. The advantages are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;When you install a Flatpak app it includes all of it's dependencies in a runtime and when you uninstall it you can remove the app and the runtime easily as well. Contrast this with installing an app and a bunch of dependencies and uninstalling them when you no longer need the app (provided no other app is using them).&lt;/li&gt;&#xA;&lt;li&gt;Since Flatpak apps do not depend on shared libraries there is no risk&#xA;that an update to a shared library will break the app&lt;/li&gt;&#xA;&lt;li&gt;Flatpak apps run in a sandbox and are therefore less likely to affect your system and other apps&lt;/li&gt;&#xA;&lt;li&gt;Since Flatpak apps include their runtime they are able to run on just about any distribution. This makes it easier for developers to release new versions since they do not have to build for each distribution. The potential advantage here is that developers, who are mostly volunteers, can spend more time working on the app and less time distributing it.&lt;/li&gt;&#xA;&lt;li&gt;Some argue that Flatpak apps are more secure but this is debatable. First, if you stick with the Ubuntu repositories then you can be reasonably assured that the apps are safe. If, however, you install additional PPA's you are trusting the sources. If you install Flatpak apps from flathub.org then you are trusting that flathub.org is keeping the bad guys out. Personally I trust Ubuntu, flathub.org, and carefully chosen third party repos when the former two don't have what I am looking for.&lt;/li&gt;&#xA;&lt;li&gt;Since elementary OS is based on Ubuntu 18.04 the apps in flathub.org are typically newer versions. You can often, however, install later versions using apt-get by adding PPA's if you don't mind adding a bunch of them.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The disadvantages:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Since you have to install the runtime with the app Flatpak apps can consume a lot more space. Some apps share the same runtime which helps a little. I installed 12 Flatpak apps that have consumed a total of 5.7GB of space.&lt;/li&gt;&#xA;&lt;li&gt;You have to download and install the first app (*.flatpakref) file via sideload before the rest of them show up in the AppCenter&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;My primary goal was to install as many of my apps as possible using the AppCenter and since eOS 5.1 has support for Flatpak apps I am accepting them as the preferred way to install apps that are not included in the default repositories.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A large part of the Linux community seems to be moving toward Flatpak, Snap, or AppImage. Whether or not it ever replaces traditional package management has yet to be seen. It could be just a fad.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That's the way I see it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FPGth.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FPGth.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2019-12-31T03:51:29.367" LastActivityDate="2019-12-31T03:51:29.367" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21878" PostTypeId="2" ParentId="21856" CreationDate="2019-12-31T00:16:52.500" Score="0" Body="&lt;p&gt;There is an option only to disable transparency at all (System settings &gt; Desktop &gt; Appearance &gt; Pannel translucensy) but not to make it transparent when there is a maximized application.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2019-12-31T00:16:52.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21879" PostTypeId="2" ParentId="21864" CreationDate="2019-12-31T00:29:18.230" Score="1" Body="&lt;p&gt;Most of the applications can be removed from the Dock by just click and drag outside of the Dock, but for some of them this do not work. Usualy when you right click (or tap with two fingers if you use a trackpad) over any icon on the dock - there is an option that says &lt;strong&gt;keep in Dock&lt;/strong&gt;. Uncheck it and this should remove the app or folder from the Dock. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If none of these works, open your files manager, Show hidden files with right click inside the right panel, navigate to you home folder &gt; ~/.config/plank/dock1/launchers and delete the corresponding .dockitem file. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2019-12-31T00:36:14.427" LastActivityDate="2019-12-31T00:36:14.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21880" PostTypeId="2" ParentId="21395" CreationDate="2019-12-31T02:53:29.343" Score="0" Body="&lt;p&gt;I had the similar issue while setting up the AVD...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my &lt;code&gt;AVD.desktop&lt;/code&gt; file's &lt;em&gt;current&lt;/em&gt; contents:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Type=Application&#xA;Name=Android Virtual Device&#xA;Icon=/home/joe/.icons/AVD.png&#xA;Exec=/home/joe/Android/Sdk/emulator/./emulator @Q&#xA;Comment=Q @ Pixel_2&#xA;Categories=Development;&#xA;Terminal=false&#xA;StartupNotify=true;&#xA;#StartupWMClass=eOS&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See the last line &lt;code&gt;#StartupWMClass=eOS&lt;/code&gt;...? Try out the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run &lt;code&gt;xprop WM_CLASS&lt;/code&gt; in the terminal and click on Pocket Casts and cross-check the same.&lt;/li&gt;&#xA;&lt;li&gt;Try Commenting the &lt;code&gt;StartupWMClass=&lt;/code&gt; line.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Tip: you can reduce / truncate the &lt;code&gt;Comment=&lt;/code&gt; section &amp;amp; uncomment the &lt;code&gt;#Icon=pocket-casts&lt;/code&gt; while commenting the other &lt;code&gt;#Icon=...&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: I had to tweak here and there, checking out different combinations till I got it right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Oh and one more thing make a copy of the &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;/home/&amp;lt;user&amp;gt;/.local/share/applications/&lt;/code&gt; and make the edits there. And this is important &lt;em&gt;each&lt;/em&gt; time you make a change to the &lt;code&gt;.desktop&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re-add it to your dock: (*&lt;a href=&quot;https://elementaryos.stackexchange.com/a/1985/18392&quot;&gt;credits&lt;/a&gt; @Cassidy James Blaede)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Remove any existing Chrome launcher from your dock by secondary/right-clicking it and unchecking Keep in Dock, or simply drag the icon off of the dock.&lt;/li&gt;&#xA;&lt;li&gt;Open the app launcher (Applications) and drag the Chrome icon to your dock, or secondary/right-click it and select Add to Dock.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2020-01-10T03:48:30.927" LastActivityDate="2020-01-10T03:48:30.927" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21881" PostTypeId="1" CreationDate="2019-12-31T03:49:11.477" Score="0" ViewCount="980" Body="&lt;p&gt;I went on Flathub to install VSCode and but it doesn't show up on applications menu. I used &lt;code&gt;flatpak list&lt;/code&gt; and it shows that VSCode has been installed. How do I get programs installed through Flatpak to show in the applications menu for quick access?&lt;/p&gt;&#xA;" OwnerUserId="20079" LastActivityDate="2019-12-31T03:49:11.477" Title="How do I get Flatpak programs to show in applications menu?" Tags="|applications|flatpak|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21882" PostTypeId="2" ParentId="21873" CreationDate="2019-12-31T06:55:03.057" Score="0" Body="&lt;p&gt;What you 'should' or 'shouldn't' prefer really depends on your environment and your use case. However there is a set of questions which might help you to choose:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Do you want/need the newest version of an app and make sure it is always up to date vs. a well tested allbeit older version?&lt;/strong&gt;&#xA;If so Flatpaks and snaps are legit choices, but its important to keep in mind that they are not tested with Elementary OS and if you run a Snap or a Flatpak app you're trusting it to run because your system has Flatpak support, rather then that App being specifically developed and tested for eOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Do you custom theme your system?&lt;/strong&gt;&#xA;If you, like me are one to install custom themes and stuff like that on your system you might not want to use Flatpaks as they can only adapt to very few themes right now. Maybe in the future this will be a viable option, but as of today there's just not enough support for Flatpaks and custom themed systems to guarantee that it will not break the design principles around which you built your desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How critical is system safety on your system?&lt;/strong&gt;&#xA;System safety is important to everybody that much is clear, but is it absolutely critical that no application has access to all parts of your file system and if not, which applications do you want to grant access to the latter? I for example, prefer my browsers and other internet related apps in a containerized format like snap or flatpak, but I will happily use debs and App Center Apps for the rest. Ultimately the question boils down to how cautious you are or have to be. I have no problems to install PPAs from devs I trust either, which however is something that I would never recommend over Flatpaks or AppCenter Apps if the second question is irrelevant to you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So: Do you want the newest apps, relative system safety and you don't theme your system? Go for Flatpaks or Snaps. I'd recommend Flatpaks since they are now natively supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you want well tested apps that work and support for system themes and are tested with eOS? AppCenter is the place to be.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you think you can trust a developer enough to give an apllication full Disk Access, theme your system and want the newest version? PPAs are the way to go.&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2019-12-31T06:55:03.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21883" PostTypeId="2" ParentId="21869" CreationDate="2019-12-31T10:09:44.070" Score="0" Body="&lt;p&gt;Ok, I figured out that &lt;code&gt;sudo apt install --reinstall elementary-desktop&lt;/code&gt; resolved my problem&lt;/p&gt;&#xA;" OwnerUserId="19995" LastActivityDate="2019-12-31T10:09:44.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21884" PostTypeId="5" CreationDate="2019-12-31T10:32:37.170" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2019-12-31T10:32:37.170" LastActivityDate="2019-12-31T10:32:37.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21885" PostTypeId="4" CreationDate="2019-12-31T10:32:37.170" Score="0" Body="used tag for default configurations" OwnerUserId="19360" LastEditorUserId="19360" LastEditDate="2020-01-01T05:56:44.097" LastActivityDate="2020-01-01T05:56:44.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21886" PostTypeId="2" ParentId="20772" CreationDate="2019-12-31T10:38:14.660" Score="2" Body="&lt;p&gt;Default content in elementary OS 5.1 HERA&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;/etc/apt/sources.list&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#deb cdrom:[elementary OS 5.0 _Juno_ - Stable amd64 (20181016)]/ bionic contrib main non-free&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic universe&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;# deb-src http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;/etc/apt/sources.list.d/appcenter.list&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://packages.elementary.io/appcenter bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;/etc/apt/sources.list.d/elementary.list&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main &#xA;deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;/etc/apt/sources.list.d/patches.list&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main &#xA;deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic main &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-31T10:38:14.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21887" PostTypeId="2" ParentId="21865" CreationDate="2019-12-31T11:00:36.587" Score="0" Body="&lt;p&gt;You have the wifi card &lt;strong&gt;Intel Wireless AC9560&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I think this question asked here will help you, you have a very good answer from  &lt;a href=&quot;https://elementaryos.stackexchange.com/users/9445/vlad-pop&quot;&gt;Vlad Pop&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/21683/19360&quot;&gt;Qestion&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/21685/19360&quot;&gt;Vlad Pop answer&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2019-12-31T11:00:36.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21889" PostTypeId="1" CreationDate="2019-12-31T11:45:50.527" Score="0" ViewCount="226" Body="&lt;p&gt;After OS and Epiphany updates, Epiphany stopped working. Installed Firefox and it worked fine. OS became unstable also: shutdown hangs; starting the system tools app also hangs; must power off. Is there some log where one can look into what might be going on. Thanks. Best.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Here goes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rui@rui-OMEN-by-HP-Laptop:~$ dmesg | tail&#xA;[   48.851081]  worker_thread+0x32/0x410&#xA;[   48.851084]  kthread+0x121/0x140&#xA;[   48.851085]  ? process_one_work+0x420/0x420&#xA;[   48.851086]  ? kthread_create_worker_on_cpu+0x70/0x70&#xA;[   48.851088]  ret_from_fork+0x35/0x40&#xA;[   48.851089] Code: a0 00 00 00 c1 e8 02 89 c3 4c 89 ff e8 1d ed fa d4 89 da 44 01 f3 81 fb f7 03 00 00 48 8d 04 95 00 00 00 00 76 7a 49 8b 44 24 38 &amp;lt;c7&amp;gt; 04 90 00 00 00 20 49 8b 74 24 18 48 85 f6 74 74 31 ff e8 9b &#xA;[   48.851137] RIP: evo_wait+0x5d/0x130 [nouveau] RSP: ffffa45801b4fbe8&#xA;[   48.851137] CR2: ffff98738a84e100&#xA;[   48.851139] ---[ end trace bb9bc699e1b7a957 ]---&#xA;[   48.851376] nouveau 0000:01:00.0: DRM: channel 0 killed!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;neofetch&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;         eeeeeeeeeeeeeeeee            rui@rui-OMEN-by-HP-Laptop &#xA;      eeeeeeeeeeeeeeeeeeeeeee         ------------------------- &#xA;    eeeee  eeeeeeeeeeee   eeeee       OS: elementary OS 5.1 Hera x86_64 &#xA;  eeee   eeeee       eee     eeee     Host: OMEN by HP Laptop &#xA; eeee   eeee          eee     eeee    Kernel: 4.15.0-72-generic &#xA;eee    eee            eee       eee   Uptime: 6 mins &#xA;eee   eee            eee        eee   Packages: 1843 &#xA;ee    eee           eeee       eeee   Shell: bash 4.4.20 &#xA;ee    eee         eeeee      eeeeee   Resolution: 3200x1800 &#xA;ee    eee       eeeee      eeeee ee   DE: Pantheon &#xA;eee   eeee   eeeeee      eeeee  eee   WM: Mutter(Gala) &#xA;eee    eeeeeeeeee     eeeeee    eee   Theme: Elementary [GTK3] &#xA; eeeeeeeeeeeeeeeeeeeeeeee    eeeee    Icons: Elementary [GTK3] &#xA;  eeeeeeee eeeeeeeeeeee      eeee     Terminal: io.elementary.t &#xA;    eeeee                 eeeee       CPU: Intel i7-7700HQ (8) @ 3.800GHz &#xA;      eeeeeee         eeeeeee &#xA;         eeeeeeeeeeeeeeeee &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;After installing a 'non-curated' NVIDIA driver everything went back to normal. Thanks for formatting my garbled dump.&lt;/p&gt;&#xA;" OwnerUserId="15302" LastEditorUserId="15302" LastEditDate="2020-01-07T17:34:37.673" LastActivityDate="2024-01-17T02:02:30.287" Title="After update Epiphany stopped working" Tags="|release-hera|shutdown|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21890" PostTypeId="2" ParentId="21889" CreationDate="2019-12-31T13:01:27.030" Score="0" Body="&lt;p&gt;Yes, post the output for &lt;code&gt;dmesg | tail&lt;/code&gt;... (not enough reputation to comment).&#xA;Also the output of &lt;code&gt;neofetch&lt;/code&gt; after installing it with &lt;code&gt;sudo apt neofetch&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote class=&quot;spoiler&quot;&gt;&#xA;  &lt;p&gt; Just &lt;code&gt;Select&lt;/code&gt;, &lt;code&gt;Copy&lt;/code&gt; from terminal &amp;amp; &lt;code&gt;Paste&lt;/code&gt; in your question.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2019-12-31T13:06:43.897" LastActivityDate="2019-12-31T13:06:43.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21892" PostTypeId="1" CreationDate="2019-12-31T17:17:44.510" Score="1" ViewCount="21" Body="&lt;p&gt;When I open a certain types of windows they start minimized. Most annoying are the flatpak &quot;open file with&quot; dialog (openning an email attachment in Evolution from Flathub), or Steam in-home streaming.&lt;/p&gt;&#xA;" OwnerUserId="20088" LastActivityDate="2019-12-31T17:17:44.510" Title="Some windows always start minimized. How to prevent it?" Tags="|plank|window-management|gala|minimize|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21893" PostTypeId="1" CreationDate="2019-12-31T18:52:53.350" Score="1" ViewCount="38" Body="&lt;p&gt;I'm facing a weird problem: after a few hours of usage, the 'Tile Right' keyboard shortcut has stopped working. I can still tile a window to the left with the shortcut just fine, but not to the right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have restarted the laptop several times meanwhile and have re-assigned the shortcut to other keys, but to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone faced this before? I'm not sure how to further debug this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running a pretty much stock 5.1. I've only installed VSCode and backport-iwlwifi-dkms (I need kernel 5.4, otherwise I need to add this to have wifi) from other PPAs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="20090" LastActivityDate="2019-12-31T18:52:53.350" Title="'Tile Right' keyboard shortcut stopped working" Tags="|keyboard-shortcuts|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21894" PostTypeId="1" CreationDate="2019-12-31T18:54:36.363" Score="1" ViewCount="41" Body="&lt;p&gt;Using ElementaryOS 5.1 Hera, Kernel 4.15.0-72-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently changed my username on my account and its caused a strange issue - on logout, a segmentation fault in libgio-2.0.so triggers, and the screen defaults to an Ubuntu 18.04 theme. If I log back in, the system freezes for 30 seconds before I'm able to do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A snippet of the kernel logs on logout and login:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[   54.557029] show_signal_msg: 17 callbacks suppressed&#xA;[   54.557030] io.elementary.c[1678]: segfault at f ip 00007f1ccbe092f3 sp 00007ffd1b75a5a0 error 4 in libgio-2.0.so.0.5600.4[7f1ccbd67000+195000]&#xA;[   54.557766] rfkill: input handler enabled&#xA;[   80.074395] rfkill: input handler disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I've done a quick search on the fault, and it seems to be a known but fixed error with Cinnamon (which I'm pretty sure I'm not using). Are there any known fixes for this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;reinstalling elementary-desktop&lt;/li&gt;&#xA;&lt;li&gt;reinstalling lightdm&lt;/li&gt;&#xA;&lt;li&gt;reinstalling gir1.2-gio-2.0&lt;/li&gt;&#xA;&lt;li&gt;(re)installing libid3tag0 libsox-fmt-mp3 vnstat vnstati&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help!&lt;/p&gt;&#xA;" OwnerUserId="20089" LastEditorUserId="16827" LastEditDate="2020-01-01T06:11:09.207" LastActivityDate="2020-01-01T06:11:09.207" Title="Getting segfault on logout" Tags="|kernel|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21898" PostTypeId="1" CreationDate="2020-01-01T15:42:08.370" Score="4" ViewCount="140" Body="&lt;p&gt;Is it possible to change  (and fix) the order that users are listed in on the greeter screen for a single machine? &lt;/p&gt;&#xA;" OwnerUserId="20099" LastActivityDate="2022-07-22T15:01:00.133" Title="Fix order of users in greeter?" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21901" PostTypeId="1" CreationDate="2020-01-02T00:49:34.390" Score="0" ViewCount="32" Body="&lt;p&gt;Anyone had any issues with upgrading from Juno to Hera? &#xA;I tried to update both ways (GUI and command line) but i keep getting the response &quot;all packages are up-to-date&quot; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My system is running the latest kernel 5.0.0-37-generic&#xA;I'm lost at this point, any help would be appreciated. &lt;/p&gt;&#xA;" OwnerUserId="19059" LastActivityDate="2020-01-02T00:49:34.390" Title="Juno 5.0 to Hera 5.1 upgrade not working" Tags="|release-hera|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21902" PostTypeId="1" CreationDate="2020-01-02T09:53:48.213" Score="1" ViewCount="58" Body="&lt;p&gt;I wanna help with various apps that come bundled with elementary os.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can help with UI/UX. &lt;/p&gt;&#xA;" OwnerUserId="20107" LastActivityDate="2020-01-07T22:23:27.037" Title="I want to help with UI/UX design?" Tags="|design|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21903" PostTypeId="2" ParentId="21902" CreationDate="2020-01-02T11:04:06.497" Score="1" Body="&lt;p&gt;If you want to help with Elementary OS in any way it is best to go to their &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub&lt;/a&gt; page and look for open issues in their respective &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;repositories&lt;/a&gt;. There might be something UI/UX related you can contribute to.&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2020-01-02T11:04:06.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21904" PostTypeId="2" ParentId="5531" CreationDate="2020-01-02T13:11:27.193" Score="0" Body="&lt;p&gt;The answer Timothy Gray provides works for me.&#xA;But I wanted to have the Tor-application integrated into my Graphical Desktop environment, and put it in the Dock for easy access. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you open the file &quot;start-tor-browser.desktop&quot; into an editor, you can see one line that is important for this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;You can also add Tor Browser to your desktop's application menu&#xA;by running './start-tor-browser.desktop --register-app'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I tried &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./start-tor-browser.desktop --register-app&#xA;Launching './Browser/start-tor-browser --detach --register-app'...&#xA;Tor Browser has been registered as a desktop app for this user in ~/.local/share/applications/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After that I could look up the Tor-browser in the Applications-menu (or with &lt;code&gt;&amp;lt;Windows-key&amp;gt;&amp;lt;spacebar&amp;gt;&lt;/code&gt;) and choose for 'Keep in dock'.&lt;/p&gt;&#xA;" OwnerUserId="9548" LastActivityDate="2020-01-02T13:11:27.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21905" PostTypeId="1" CreationDate="2020-01-02T13:19:01.763" Score="1" ViewCount="988" Body="&lt;p&gt;Hoping somebody can help&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a dell G5 5587 laptop running Hera, I have connected to external monitor via HDMI cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when the laptops lid is closed I can work on the external.&#xA;when the laptop gets suspended I can wake it up with USB connected keyboard/mouse&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It wont however automatically start the display on the external monitor, i need to open the laptop and login and then it will.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any solution? &lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2020-01-09T06:22:43.267" Title="Laptop external monitor" Tags="|display|suspend|hdmi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21906" PostTypeId="2" ParentId="12386" CreationDate="2020-01-02T18:30:04.493" Score="1" Body="&lt;p&gt;I know this is an older post but I ran across this post while looking into my own issue and figured I would provide the solution I found. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In Chromium: After installing the &quot;pepperflashplugin-nonfree&quot; I was able to enable it in Chromium and access content as usual. I suspect bugs (or what have you) have been corrected since this post. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below commands in terminal: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-restricted-extras&#xA;&#xA;sudo apt-get install pepperflashplugin-nonfree&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;With Firefox: I was able to get the &quot;libflashplayer.so&quot; file from here @ &lt;a href=&quot;https://get.adobe.com/flashplayer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Adobe Flash Player&lt;/a&gt;.  After downloading the tar.gz file, I copied and pasted the file in &quot;/usr/lib/mozilla/plugins&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I restarted the browser in firefox and was golden from there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This info came from here @ &lt;a href=&quot;https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games#w_installing-the-flash-plugin-manually&quot; rel=&quot;nofollow noreferrer&quot;&gt;Mozilla Support&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps someone down the road. &lt;/p&gt;&#xA;" OwnerUserId="20112" LastActivityDate="2020-01-02T18:30:04.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21908" PostTypeId="2" ParentId="21473" CreationDate="2020-01-02T19:21:33.050" Score="0" Body="&lt;p&gt;Utiliza Rufus para bootear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sigue los siguientes pasos:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/installation#creating-an-installation-medium&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#creating-an-installation-medium&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20114" LastActivityDate="2020-01-02T19:21:33.050" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21911" PostTypeId="1" AcceptedAnswerId="25100" CreationDate="2020-01-03T09:59:08.247" Score="1" ViewCount="98" Body="&lt;p&gt;I'm facing some problems with the display. I had this previously but I cannot exactly remember how I solved it then... Okay here is the thing:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YzjCB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YzjCB.jpg&quot; alt=&quot;screen&quot; /&gt;&lt;/a&gt;&#xA;What have I tired, didn't work this time:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/398903/unknown-display-besides-laptop-built-in-display-old-question-but-with-no-answer&quot;&gt;https://askubuntu.com/questions/398903/unknown-display-besides-laptop-built-in-display-old-question-but-with-no-answer&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/362081/two-monitors-when-only-having-one-in-13-10&quot;&gt;https://askubuntu.com/questions/362081/two-monitors-when-only-having-one-in-13-10&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/283018/ubuntu-detects-2-monitors-when-i-only-have-one&quot;&gt;https://askubuntu.com/questions/283018/ubuntu-detects-2-monitors-when-i-only-have-one&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Some important outputs:&lt;/h3&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;$ lspci | grep -i vga&lt;/code&gt;&lt;/strong&gt;&lt;br&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)&#xA;01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev a1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;$ ls /sys/class/drm&lt;/code&gt;&lt;/strong&gt;&lt;br&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;card0  card0-DP-1  card0-HDMI-A-1  card0-LVDS-1  card0-VGA-1  card1  card1-HDMI-A-2  card1-VGA-2  renderD128  renderD129  version&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;$ xrandr | grep &amp;quot; connected &amp;quot; | awk '{ print$1 }'&lt;/code&gt;&lt;/strong&gt;&lt;br&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;VGA-0&#xA;LVDS-1-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;$ xrandr -q&lt;/code&gt;&lt;/strong&gt;&lt;br&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 2390 x 768, maximum 16384 x 16384&#xA;VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm&#xA;   1024x768      60.00*+&#xA;   1600x900      59.82  &#xA;   1400x900      59.88  &#xA;...&#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;LVDS-1-1 connected primary 1366x768+1024+0 (normal left inverted right x axis y axis) 344mm x 194mm&#xA;   1366x768      59.64*+&#xA;   1360x768      59.80    59.96  &#xA;   1280x720      60.00    59.99    59.86    59.74  &#xA;   1024x768      60.04    60.00  &#xA;...&#xA;VGA-1-1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-1-1 disconnected (normal left inverted right x axis y axis)&#xA;DP-1-1 disconnected (normal left inverted right x axis y axis)&#xA;  1360x768 (0x47) 84.750MHz -HSync +VSync&#xA;        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock  47.72KHz&#xA;        v: height  768 start  771 end  781 total  798           clock  59.80H&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;code&gt;$ cat /etc/default/grub&lt;/code&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;...&#xA;GRUB_DEFAULT=&amp;quot;0&amp;quot;&#xA;GRUB_TIMEOUT_STYLE=&amp;quot;hidden&amp;quot;&#xA;GRUB_TIMEOUT=&amp;quot;-1&amp;quot;&#xA;GRUB_DISTRIBUTOR=&amp;quot;`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&amp;quot;&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;video=VGA-1:d&amp;quot;&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Here is my &lt;em&gt;primary&lt;/em&gt; graphic driver info:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/r09J5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r09J5.png&quot; alt=&quot;driver&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The greeter (login screen) is also affected it would hide if I move the cursor to the elongated / extended screen.&lt;/p&gt;&#xA;&lt;p&gt;Can anyone help me with this?&lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2020-07-02T06:40:39.883" LastActivityDate="2020-07-02T06:45:48.780" Title="Unkown display causing elongated screenshot" Tags="|display|graphic-drivers|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21912" PostTypeId="1" CreationDate="2020-01-03T11:30:23.433" Score="0" ViewCount="48" Body="&lt;p&gt;The AppCenter offers at the moment version 5.0.1 of KMyMoney. According to &lt;a href=&quot;https://kmymoney.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://kmymoney.org/&lt;/a&gt; the latest version is 5.0.7. My bank rejected the online access via KMyMoney 5.0.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can I find somewhere a time schedule or something like that when AppCenter will be updated to the latest release of a specific software?&lt;/p&gt;&#xA;" OwnerUserId="19863" LastActivityDate="2020-01-03T12:06:46.217" Title="KMyMoney isn't up to date in elementaryOS AppCenter" Tags="|applications|appcenter|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21913" PostTypeId="2" ParentId="21912" CreationDate="2020-01-03T12:06:46.217" Score="1" Body="&lt;p&gt;latest version thats in tied to ubunthu repo can be found here:&#xA;&lt;a href=&quot;https://pkgs.org/download/kmymoney&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pkgs.org/download/kmymoney&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that is a debian packaged version &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;kmymoney_5.0.6-1_amd64.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;other wise if you want the latest version you can download source files and build it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://kmymoney.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://kmymoney.org/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;there are instruction in the &quot;README.cmake&quot; file&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2020-01-03T12:06:46.217" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21915" PostTypeId="2" ParentId="21455" CreationDate="2020-01-03T16:51:04.693" Score="1" Body="&lt;p&gt;I actually found the solution to the problem in &amp;quot;Linux Magazin&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;My full workflow looks like this:&lt;/p&gt;&#xA;&lt;h1&gt;Lid Hibernate Ubuntu&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make sure you have SWAP &amp;gt; RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h2&gt;SWAP to fstab&lt;/h2&gt;&#xA;&lt;p&gt;find swap UUID:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;blkid | grep swap&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;should output&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/dev/nvme0n1p1: UUID=&amp;quot;90ee7315-b16a-4e2g-bd07-cg83703750b9&amp;quot; TYPE=&amp;quot;swap&amp;quot; PARTUUID=&amp;quot;abadca41-942a-6c83-88d2-db28cf41ce13&amp;quot;`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;copy the UUID, without the &amp;quot; :&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;UUID=90ee7315-b16a-4e2g-bd07-cg83703750b9&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;add swap to fstab&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;add&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;UUID=90ee7315-b16a-4e2g-bd07-cg83703750b9 none            swap    sw              0       0 &lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;reboot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h2&gt;add swap to grub&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;edit&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&lt;/code&gt;&#xA;to&#xA;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;resume=UUID=90ee7215-c16a-4e2f-bd07-cd83703750b6&amp;quot; &lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;if you DONT want kernel messages to be shown and keep the plymouth animation during boot, change to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash resume=UUID=90ee7215-c16a-4e2f-bd07-cd83703750b6&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;update grub with the new settings:&#xA;&lt;code&gt;sudo update-grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;try with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl hibernate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;after reboot it should show all the same windows again&lt;/p&gt;&#xA;&lt;h2&gt;activate automatic hibernation after delay&lt;/h2&gt;&#xA;&lt;p&gt;To start using this function you need to create a file&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/systemd/sleep.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;add&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Sleep]&#xA;HibernateDelaySec=3600&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;try&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl suspend-then-hibernate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Should sleep for the time specified and then the screen turns on shortly and it hibernates. Try rebooting after this happened.&lt;/p&gt;&#xA;&lt;p&gt;If it works make it permanent.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/systemd/logind.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;change&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#HandleSuspendKey=suspend&#xA;#HandleLidSwitch=suspend&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;HandleSuspendKey=suspend-then-hibernate&#xA;HandleLidSwitch=suspend-then-hibernate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save the file. Restart logind service by the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemctl restart systemd-logind.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;sources:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Linux Magazin 01/20, S.72&lt;/li&gt;&#xA;&lt;li&gt;almost similar: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/920/how-to-hibernate-freya&quot;&gt;How to hibernate Freya?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/145443/how-do-i-use-pm-suspend-hybrid-by-default-instead-of-pm-suspend/781957#781957&quot;&gt;https://askubuntu.com/questions/145443/how-do-i-use-pm-suspend-hybrid-by-default-instead-of-pm-suspend/781957#781957&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19681" LastEditorUserId="12483" LastEditDate="2020-06-20T12:13:15.483" LastActivityDate="2020-06-20T12:13:15.483" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="21916" PostTypeId="2" ParentId="21760" CreationDate="2020-01-03T17:13:51.840" Score="0" Body="&lt;p&gt;See comments from &lt;a href=&quot;/questions/tagged/endorama&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;endorama&amp;#39;&quot; rel=&quot;tag&quot;&gt;endorama&lt;/a&gt;: This problem is an open issue on github --&gt;  &lt;a href=&quot;http://%20github.com/elementary/cerbere/issues/35&quot; rel=&quot;nofollow noreferrer&quot;&gt;github.com/elementary/cerbere/issues/35&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19863" LastActivityDate="2020-01-03T17:13:51.840" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21917" PostTypeId="1" CreationDate="2020-01-03T18:17:02.617" Score="1" ViewCount="147" Body="&lt;p&gt;On elementary OS 5.1 Hera,when I configure a reminder in Calendar, it does not register. How can I fix this problem. I have not found any solution so far. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="20123" LastEditorUserId="15904" LastEditDate="2020-01-04T06:27:07.327" LastActivityDate="2021-05-28T09:08:10.813" Title="Calendar reminder does not work" Tags="|release-hera|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21918" PostTypeId="1" AcceptedAnswerId="21930" CreationDate="2020-01-03T18:52:25.433" Score="2" ViewCount="862" Body="&lt;p&gt;For some reason since yesterday the &lt;code&gt;tab&lt;/code&gt; key option for auto fill is not working properly in the terminal. I have also noticed the user name color has changed to grey (not sure if it has something to do but that happened at the same time the auto fill stop working).&lt;/p&gt;&#xA;&lt;h2&gt;Examples:&lt;/h2&gt;&#xA;&lt;p&gt;If I write down &lt;code&gt;sud&lt;/code&gt; and then tap the &lt;code&gt;tab&lt;/code&gt; key, &lt;code&gt;sudo&lt;/code&gt; command is auto filled properly.&lt;/p&gt;&#xA;&lt;p&gt;However in this case &lt;code&gt;sudo apt inst&lt;/code&gt;, the &lt;code&gt;tab&lt;/code&gt; key does not work and you can hear the Terminal bell.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ujWWD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ujWWD.png&quot; alt=&quot;About&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/CZ9Jl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CZ9Jl.png&quot; alt=&quot;Terminal&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please let me know if you need any other information. Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="20124" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-01-07T02:12:29.507" Title="Terminal does not auto fill anymore with tab key" Tags="|pantheon-terminal|release-hera|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21919" PostTypeId="1" AcceptedAnswerId="25465" CreationDate="2020-01-03T19:01:30.027" Score="0" ViewCount="34" Body="&lt;p&gt;I'm trying to create a bug bounty with bountysource but there isn't any specific option that assures me the money is redirected to that bug. What are the correct steps to create a bug bounty?&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-08-11T16:11:05.347" Title="How to create a bug bounty?" Tags="|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21920" PostTypeId="1" AcceptedAnswerId="21954" CreationDate="2020-01-03T22:15:08.710" Score="2" ViewCount="851" Body="&lt;p&gt;Decided to install Linux, because last supported os is Lion 10.7.5, and now in 2020  I’m out of working browsers. So the question is - Is it possible to install elementary on my old Macbook Air? I read a lot of guides, topics, etc. and have problems with boot. I think that the main problem is - 32 Efi boot which isn’t supported. &#xA;“Try elementary” working perfectly, also installation process is okay, but grub is not working. I tried install without grub using efit, no result.&#xA;Is there anyone who installed elementary on 1237? Need help, please(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upd&#xA;Installing via USB&#xA;System: core2duo, 2gb ram, intel graphics gma 3100&lt;/p&gt;&#xA;" OwnerUserId="20126" LastEditorUserId="20126" LastEditDate="2020-01-03T22:29:48.413" LastActivityDate="2020-01-06T20:27:47.457" Title="elementaryOS on Macbook Air 1.1 (a1237)" Tags="|system-installation|boot|grub|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21922" PostTypeId="2" ParentId="21917" CreationDate="2020-01-03T23:53:20.800" Score="1" Body="&lt;p&gt;Unfortunately this is a known issue: (&lt;a href=&quot;https://github.com/elementary/calendar/issues/459&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/issues/459&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/calendar/issues/469&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/issues/469&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/calendar/issues/474&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/issues/474&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: This should fix it: &lt;a href=&quot;https://github.com/elementary/calendar/pull/481&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calendar/pull/481&lt;/a&gt;, hopefully it will be merged and then the fix will be provided in an update.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastEditorUserId="12608" LastEditDate="2020-01-04T00:32:40.657" LastActivityDate="2020-01-04T00:32:40.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21923" PostTypeId="1" AcceptedAnswerId="21929" CreationDate="2020-01-04T02:59:49.267" Score="1" ViewCount="599" Body="&lt;p&gt;I'm thinking of trying elementaryOS on my laptop. (Dell Inspiron with Intel i5 &amp;amp; Nvidia) &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have created a live disk with a USB drive and Rufus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I boot up my laptop, I chose to boot through UEFI and I can see the splash screen just fine, and the window to choose the language as well as two options, &quot;Try Elementary&quot; and &quot;Install Elementary&quot; (or equivalent). The cursor can be moved and the options can be selected.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon clicking on &quot;Try Elementary&quot; (which is what I want to do), the window closes and the cursor disappears, leaving me with a blank, grey screen. I can't do anything at this point and can only restart the device by force (pressing and holding the power button).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it's something with my laptop since the live disk works fine on another desktop running Pentium. I have not seen any other help thread with symptoms similar to mine, thus any help would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="20127" LastEditorUserId="20127" LastEditDate="2020-01-04T03:57:46.897" LastActivityDate="2020-01-29T23:41:49.200" Title="Blank screen after &quot;Try Elementary&quot; button clicked" Tags="|system-installation|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21924" PostTypeId="2" ParentId="21165" CreationDate="2020-01-04T13:24:09.390" Score="1" Body="&lt;p&gt;In some instances, the program you want to define as default does not appear on its category menu drop-down in &lt;code&gt;System Settings &amp;gt; Applications &amp;gt; Default tab&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another way is to right click on a file with an extension (for a web browser, that would be a &lt;code&gt;.html&lt;/code&gt; file), and set the program to be used in Properties.&lt;/p&gt;&#xA;" OwnerUserId="6445" LastEditorUserId="6445" LastEditDate="2020-01-04T13:29:12.907" LastActivityDate="2020-01-04T13:29:12.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21925" PostTypeId="2" ParentId="21918" CreationDate="2020-01-04T14:47:44.073" Score="0" Body="&lt;p&gt;I would check the AppCenter. I just received a notice to update the terminal. This could fix whatever config broke that disabled your tab function. &lt;/p&gt;&#xA;" OwnerUserId="17221" LastActivityDate="2020-01-04T14:47:44.073" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21927" PostTypeId="2" ParentId="20872" CreationDate="2020-01-04T16:09:00.247" Score="0" Body="&lt;p&gt;You can create the folder &lt;code&gt;/usr/share/cloud-providers&lt;/code&gt;, and then put the file &lt;code&gt;com.nextcloudgmbh.Nextcloud.ini&lt;/code&gt; there. You can get the file from the Archlinux package here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.archlinux.org/packages/community/x86_64/nextcloud-client/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.archlinux.org/packages/community/x86_64/nextcloud-client/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will also need the Nextcloud desktop client installed, which you can install from the Nextcloud ppa. Configure and set the Nextcloud client to start at login. Log out and login again, and you should see the Nextcloud option in Files.&lt;/p&gt;&#xA;" OwnerUserId="161" LastActivityDate="2020-01-04T16:09:00.247" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21928" PostTypeId="1" CreationDate="2020-01-04T18:02:41.060" Score="0" ViewCount="59" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1EE75.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1EE75.png&quot; alt=&quot;Double Visual studio code applications&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help i got 2 visual studio code applications icons and i cannot find a fix please help!&lt;/p&gt;&#xA;" OwnerUserId="20134" LastActivityDate="2020-01-05T00:46:07.800" Title="Double visual studio code?" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21929" PostTypeId="2" ParentId="21923" CreationDate="2020-01-04T18:47:40.180" Score="2" Body="&lt;p&gt;Can you please try hitting the 'e' key in the grub boot menu (text mode), and adding 'nomodeset=1' to the end of the line that starts with 'linux'. Then hit F10 to continue booting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You should see something like: &#xA;&lt;a href=&quot;https://i.stack.imgur.com/WguwB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WguwB.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Googled image, not the exact line), Basically that's where I'm asking you to add the 'nomodeset=1' value at the end.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks!&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-04T18:47:40.180" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21930" PostTypeId="2" ParentId="21918" CreationDate="2020-01-04T19:04:39.607" Score="4" Body="&lt;p&gt;Can you tell if the problem is specific to &lt;em&gt;io.elementary.terminal&lt;/em&gt; (the default elementaryOS terminal GUI), or is it the Bash shell in general?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try keyboard combo &lt;strong&gt;Ctrl-Alt-F2&lt;/strong&gt; to switch to another virtual console (TTY), log in as the same user, and try using Tab Completion there. If you haven't switched TTY before, remember that by default pressing &lt;strong&gt;Ctrl-Alt-F7&lt;/strong&gt; will return you to your graphical (GUI) session.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If Tab Completion doesn't work in another virtual console either, then you may have an issue with your Bash configuration. If that's the case, try checking out the following thread from the Ubuntu support forums: &lt;a href=&quot;https://askubuntu.com/questions/33440/tab-completion-doesnt-work-for-commands&quot;&gt;https://askubuntu.com/questions/33440/tab-completion-doesnt-work-for-commands&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20135" LastActivityDate="2020-01-04T19:04:39.607" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="21931" PostTypeId="2" ParentId="17799" CreationDate="2020-01-04T21:15:24.170" Score="2" Body="&lt;p&gt;I know that with at least the elementaryOS 5.0 &quot;Juno&quot; install media you are able to create custom partition tables.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Proceed through the installation wizard, and when you get to the &quot;Installation Type&quot; screen, select &quot;Something else.&quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2ToJt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2ToJt.png&quot; alt=&quot;installationtype_select_something else&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From here you can add/remove/change partitions.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xehq3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xehq3.png&quot; alt=&quot;customize_partitions&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're using a different version or are used to using other tools, you could consider partitioning the disk first, and then install the OS later.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, with the elementaryOS 5.0 install disk:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot from the installation media and select &quot;Try elementaryOS without installing&quot; from the menu.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/B461y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B461y.png&quot; alt=&quot;bootmenu&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run GParted and create the partitions exactly as you'd like. If you'd only like to create the swap partition, then you could do that and point the installer at it later. In this example, I'm creating a 2GB swap partition at the end of the disk.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/92fri.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/92fri.png&quot; alt=&quot;creating_swap_in_gparted&quot;&gt;&lt;/a&gt;&#xA;Note: GParted is included with the live distro by default (at least in 5.0 Juno), but some people prefer to use Gnome-Disk-Utilities. You can install it from the command line with &lt;code&gt;sudo apt install gnome-disk-utility&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Save the partition table changes and reboot the PC&lt;/li&gt;&#xA;&lt;li&gt;Proceed through the installation wizard, and when you get to the &quot;Installation Type&quot; screen, select &quot;Something else.&quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2ToJt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2ToJt.png&quot; alt=&quot;installationtype_select_something else&quot;&gt;&lt;/a&gt;&#xA;From here you can add/remove/change partitions.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xehq3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xehq3.png&quot; alt=&quot;customize_partitions&quot;&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Also as a side note, it may not be necessary to set the swap as double your RAM.&#xA;Abhishek Prakash over at &lt;em&gt;It's Foss&lt;/em&gt; recently wrote an &lt;a href=&quot;https://itsfoss.com/swap-size/&quot; rel=&quot;nofollow noreferrer&quot;&gt;article&lt;/a&gt; about swap file sizing that you might want to check out. The short version is that RedHat, CentOS, and Ubuntu suggest slightly different calculations. Since elementaryOS is Ubuntu-derived, here's what he says Ubuntu recommends:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;If hibernation is used, swap size should be equal to size of RAM plus the square root of the RAM size&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Check the &lt;a href=&quot;https://itsfoss.com/swap-size/&quot; rel=&quot;nofollow noreferrer&quot;&gt;article&lt;/a&gt; for a table containing examples with common RAM sizes if you don't have to worry about performing the calculation yourself.&lt;/p&gt;&#xA;" OwnerUserId="20135" LastActivityDate="2020-01-04T21:15:24.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21932" PostTypeId="2" ParentId="18479" CreationDate="2020-01-04T22:36:02.553" Score="0" Body="&lt;p&gt;This was not an issue for me until the  latest update I installed on 01/04/2020. I verified on three different computers. No issue until this update was installed and this was the only update installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &quot;remember-tabs&quot; and &quot;save-exited-tabs&quot; settings make no difference. An extra tab always opens for me.&lt;/p&gt;&#xA;" OwnerUserId="18377" LastActivityDate="2020-01-04T22:36:02.553" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21933" PostTypeId="2" ParentId="21928" CreationDate="2020-01-05T00:46:07.800" Score="1" Body="&lt;p&gt;I don't know why you would have two icons, but you could hide one using AppEditor (&lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.appeditor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.appeditor&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-05T00:46:07.800" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21934" PostTypeId="1" AcceptedAnswerId="21936" CreationDate="2020-01-05T01:55:11.657" Score="1" ViewCount="88" Body="&lt;p&gt;I need to make a script run at startup to launch an application. How do I do this outside of the GUI (outside of settings&gt;applications&gt;startup)?&lt;/p&gt;&#xA;" OwnerUserId="20077" LastActivityDate="2020-01-05T02:34:53.483" Title="How do I make a script run at startup (not from settings)?" Tags="|release-hera|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21935" PostTypeId="1" AcceptedAnswerId="21937" CreationDate="2020-01-05T02:27:46.447" Score="0" ViewCount="816" Body="&lt;p&gt;Everytime I close my terminal after running &lt;code&gt;plank &amp;amp;&lt;/code&gt; the dock disappears. I also get this warning &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[WARN 20:23:03.825433] [Environment:165] XDG_SESSION_CLASS not set in this environment!&#xA;[WARN 20:23:03.853953] [Preferences:192] '/usr/share/plank/themes/Default/dock.theme' is read-only&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Could someone please help? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="20137" LastActivityDate="2021-08-14T10:22:26.467" Title="Dock Disappears when I close my terminal" Tags="|plank|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21936" PostTypeId="2" ParentId="21934" CreationDate="2020-01-05T02:34:53.483" Score="3" Body="&lt;p&gt;You can manually add a .desktop file to ~/.config/autostart/ and this would be executed by elementary on login. This would be effectively identical to using the GUI though. &lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-05T02:34:53.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21937" PostTypeId="2" ParentId="21935" CreationDate="2020-01-05T02:42:47.380" Score="1" Body="&lt;p&gt;This would be expected behaviour, the &amp;amp; whilst making it a background task does still keep it as a child process of the terminal so when the terminal is closed so does plank. If you wish to keep it alive this question may be helpful: &lt;a href=&quot;https://unix.stackexchange.com/questions/4004/how-can-i-run-a-command-which-will-survive-terminal-close#4006&quot;&gt;https://unix.stackexchange.com/questions/4004/how-can-i-run-a-command-which-will-survive-terminal-close#4006&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-05T02:42:47.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21938" PostTypeId="1" CreationDate="2020-01-05T07:23:02.733" Score="0" ViewCount="972" Body="&lt;p&gt;I need to know If Windows Applications &amp;amp; Third-Part Applications are working functionally om elementary OS or not? Like MS Office 2016, Internet Download Manager, ...etc? Also, Is it functionally like MAC OS? So, It means no antivirus will be available there even as default like Windows OS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="20139" LastEditorUserId="16827" LastEditDate="2020-01-06T19:22:05.927" LastActivityDate="2022-12-27T17:16:07.443" Title="Are all Windows applications working on elementary OS?" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21942" PostTypeId="2" ParentId="21938" CreationDate="2020-01-05T13:54:28.593" Score="1" Body="&lt;p&gt;It is possible to run some Windows applications using wine, you can look up compatibility here: &lt;a href=&quot;https://appdb.winehq.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appdb.winehq.org/&lt;/a&gt; though you would likely have issues. There may be alternatives that you can use for example instead of Office 2016 you could use LibreOffice, OpenOffice, SoftMaker Office, or WPS Office. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In terms of antivirus there is no antivirus by default, however you could install Clam antivirus which is in the repositories for free, there are a few paid antivirus but these are generally targetting business servers. Malware is usually less of a problem for Gnu/Linux based desktops than Windows though.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-05T13:54:28.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21943" PostTypeId="1" CreationDate="2020-01-05T19:40:27.913" Score="1" ViewCount="257" Body="&lt;p&gt;So I have tried everything I know. I have also installed &lt;code&gt;firmware-atheros&lt;/code&gt; as suggested in some other posts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't understand why my AR9721 USB Adapter isn't working because I seem to have everything I need. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For reference, here's my &lt;code&gt;lsusb&lt;/code&gt; output-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 005: ID 0bda:565a Realtek Semiconductor Corp. &#xA;Bus 001 Device 004: ID 27c6:538d  &#xA;Bus 001 Device 007: ID 0cf3:9271 Atheros Communications, Inc. AR9271 802.11n&#xA;Bus 001 Device 006: ID 8087:0aaa Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and here's my &lt;code&gt;lsmod | grep ath&lt;/code&gt; output-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ath9k_htc              77824  0&#xA;ath9k_common           36864  1 ath9k_htc&#xA;ath9k_hw              475136  2 ath9k_htc,ath9k_common&#xA;ath                    32768  3 ath9k_htc,ath9k_common,ath9k_hw&#xA;mac80211              770048  2 ath9k_htc,iwlmvm&#xA;cfg80211              679936  7 ath9k_htc,wl,ath9k_common,iwlmvm,ath,iwlwifi,mac80211&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I seem to have the relevant modules and the device is getting detected as a usb device but it just doesn't work? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't really want to use it with my eOS but with my Kali VM in Virtualbox. That, however cannot be done if the device isn't being recognized as a Wi-Fi adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;ifconfig -a&lt;/code&gt; doesn't show the adapter either-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lo: flags=73&amp;lt;UP,LOOPBACK,RUNNING&amp;gt;  mtu 65536&#xA;        inet 127.0.0.1  netmask 255.0.0.0&#xA;        inet6 ::1  prefixlen 128  scopeid 0x10&amp;lt;host&amp;gt;&#xA;        loop  txqueuelen 1000  (Local Loopback)&#xA;        RX packets 687  bytes 93330 (93.3 KB)&#xA;        RX errors 0  dropped 0  overruns 0  frame 0&#xA;        TX packets 687  bytes 93330 (93.3 KB)&#xA;        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0&#xA;&#xA;wlp0s20f3: flags=4163&amp;lt;UP,BROADCAST,RUNNING,MULTICAST&amp;gt;  mtu 1500&#xA;        inet 192.168.5.78  netmask 255.255.254.0  broadcast 192.168.5.255&#xA;        inet6 fe80::e4df:33c8:597d:a7aa  prefixlen 64  scopeid 0x20&amp;lt;link&amp;gt;&#xA;        ether 90:78:41:07:77:45  txqueuelen 1000  (Ethernet)&#xA;        RX packets 13912  bytes 2799094 (2.7 MB)&#xA;        RX errors 0  dropped 0  overruns 0  frame 0&#xA;        TX packets 3548  bytes 790391 (790.3 KB)&#xA;        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The only adapter being shown here is my integrated Intel Wireless card in my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The Atheros card is nowhere to be found. Not even in &lt;code&gt;lshw -c network&lt;/code&gt;-&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;  *-network                 &#xA;       description: Ethernet interface&#xA;       product: Intel Corporation&#xA;       vendor: Intel Corporation&#xA;       physical id: 14.3&#xA;       bus info: pci@0000:00:14.3&#xA;       logical name: wlp0s20f3&#xA;       version: 00&#xA;       serial: 90:78:41:07:77:45&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical&#xA;       configuration: broadcast=yes driver=iwlwifi driverversion=5.0.0-37-generic firmware=48.13675109.0 ip=192.168.5.78 latency=0 link=yes multicast=yes&#xA;       resources: irq:16 memory:a1218000-a121bfff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;EDIT: I am confident that the adapter is fully functional as it works with my Windows install. I prefer to work in Linux, however and it is extremely inconvinient to drop all my work and boot into Windows to use Kali in VB.&lt;/p&gt;&#xA;" OwnerUserId="20146" LastEditorUserId="20146" LastEditDate="2020-01-05T19:57:04.817" LastActivityDate="2020-01-05T19:57:04.817" Title="Atheros AR9271 just doesn't work!" Tags="|wifi|networking|release-hera|usb|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21945" PostTypeId="1" AcceptedAnswerId="22043" CreationDate="2020-01-05T23:24:19.200" Score="1" ViewCount="29" Body="&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io = {};&#xA;io.wchar = 111111;&#xA;debug((string)io.wchar); // (null)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So the problem here is that &lt;code&gt;io.wchar&lt;/code&gt; is still &lt;code&gt;null&lt;/code&gt;. You can look at the whole class here: &lt;a href=&quot;https://github.com/stsdc/monitor/blob/dev/src/Managers/Process.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/stsdc/monitor/blob/dev/src/Managers/Process.vala&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7394" LastActivityDate="2020-01-12T14:04:46.113" Title="Can't change value in struct property inside class" Tags="|development|vala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21946" PostTypeId="2" ParentId="21945" CreationDate="2020-01-05T23:36:57.600" Score="1" Body="&lt;p&gt;I think the issue is you are using a cast, try using io.wchar.to_string() [&lt;a href=&quot;https://valadoc.org/glib-2.0/uint64.to_string.html]&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://valadoc.org/glib-2.0/uint64.to_string.html]&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit:&#xA;This worked for me based on your code, casting gave me a segfault.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;struct Monitor.IO {&#xA;    public uint64 wchar;&#xA;}&#xA;&#xA;int main (string[] args) {&#xA;    Monitor.IO io = {};&#xA;    io.wchar = 111111;&#xA;    warning (io.wchar.to_string ()); // Struct.vala:9: 111111&#xA;&#xA;    return 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12608" LastEditorUserId="12608" LastEditDate="2020-01-05T23:42:22.653" LastActivityDate="2020-01-05T23:42:22.653" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21952" PostTypeId="1" CreationDate="2020-01-06T16:26:03.687" Score="1" ViewCount="67" Body="&lt;p&gt;When I'm running a task in Elementary that takes a prolonged time, I'd like to switch off the display until an event like the mouse moving or keystroke &quot;wakes&quot; it back up again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On MacOS and Windows I can do this using a system call but Elementary Linux, no luck so far...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried &lt;strong&gt;xset dpms force off&lt;/strong&gt; but the screen &quot;wakes&quot; back up after a short time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestions or solutions would be appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-TechScott.&lt;/p&gt;&#xA;" OwnerUserId="20161" LastActivityDate="2024-01-16T03:05:40.677" Title="I am looking to create a shortcut to put the display to sleep" Tags="|display|keyboard-shortcuts|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21953" PostTypeId="2" ParentId="21952" CreationDate="2020-01-06T18:43:56.320" Score="0" Body="&lt;p&gt;Try it like this:&lt;code&gt;xset -display :0.0 dpms force off&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-06T18:43:56.320" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21954" PostTypeId="2" ParentId="21920" CreationDate="2020-01-06T20:18:36.273" Score="1" Body="&lt;p&gt;Problem solved&#xA;Steps:&#xA;Remove refit(mac hd/efi) if it was installed.&#xA;Install refind.&#xA;Enter live usb with linux on it using refind bootloader, when grub appear press “e” and type “nomodeset” after “splash” then f10.&#xA;Install linux alongside mac os, (or else using only “/“ and swap if you want)&#xA;After installation refind will be replaced by grub2.&#xA;In grub choose os that you want.&#xA;Done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But no wifi)))&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upd: after using eOS at about a half an hour, updated everything, installed some apps. Performance is okay, i can now watch youtube in 720 without lags. Sensors: cpu temperature at 63-65 C’ no apps opened. Sometimes system freezes when 3 and more apps opened (cpu 90-100% use). No issues about RAM, whatever i do only 60% use, swap use only 1% of it’s capacity (2Gb) Will try Lubuntu. &lt;/p&gt;&#xA;" OwnerUserId="20126" LastEditorUserId="20126" LastEditDate="2020-01-06T20:27:47.457" LastActivityDate="2020-01-06T20:27:47.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21957" PostTypeId="2" ParentId="21918" CreationDate="2020-01-07T02:12:29.507" Score="0" Body="&lt;p&gt;This problem was solved by @curioser (comments section above)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem was caused by the &lt;code&gt;/home/myprofile/.bashrc&lt;/code&gt; file. For some reason it was not there. I took it from another profile and just copy/paste it to mine. The Terminal began to work properly immediately. &lt;/p&gt;&#xA;" OwnerUserId="20124" LastActivityDate="2020-01-07T02:12:29.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21959" PostTypeId="2" ParentId="21905" CreationDate="2020-01-07T12:58:38.680" Score="1" Body="&lt;p&gt;Instead of closing the lid of the laptop you can use the &lt;strong&gt;cycle display modes&lt;/strong&gt; shortcut &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;p&lt;/kbd&gt;. On both of the laptops I use there is such a function key also. If I do it like this after the resume of suspend it enables the same monitor as before the suspend. Also, if you want to skip logging in on wakeup, you can set this using System settings &gt; Security &amp;amp; Privacy &gt; Locking &lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-01-07T22:43:58.637" LastActivityDate="2020-01-07T22:43:58.637" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21960" PostTypeId="1" CreationDate="2020-01-07T15:57:31.450" Score="1" ViewCount="1774" Body="&lt;p&gt;let me give an intro to the mess I made, I wanted to uninstall the older version of Wine using synaptic manager and when I marked for removal there was an option for complete removal. I didn’t think about it and clicked okay and didn’t check back. &#xA;So long story short, the elementary desktop, and a few other key packages were removed and now I can’t log back in as it says “unable to login” Starting the session has failed&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded the 5.1 ISO thought I can do the upgrade but there’s no option for that either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit:&#xA;I installed and reinstalled the elementary-desktop from the terminal and I’m still getting the same error, I carried out an apt-update as well&lt;/p&gt;&#xA;" OwnerUserId="20170" LastEditorUserId="20170" LastEditDate="2020-01-07T16:25:25.827" LastActivityDate="2020-11-02T04:39:18.467" Title="Unable to Log In - Starting the session has failed" Tags="|greeter|desktop-environment|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="21962" PostTypeId="1" AcceptedAnswerId="21967" CreationDate="2020-01-07T20:16:20.147" Score="1" ViewCount="672" Body="&lt;p&gt;I'm new on elementary OS and I'm looking for a way to launch the multitask view of desktop through a terminal command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My goal is to use &quot;Gesture&quot; app and to asign a command to a gesture to show the multitask view&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/778Yg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/778Yg.jpg&quot; alt=&quot;elementary multitask view&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BEJ6g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BEJ6g.png&quot; alt=&quot;Gestures app&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20049" LastActivityDate="2020-01-07T22:21:38.847" Title="Elementary OS Desktop multitask view through terminal" Tags="|pantheon-terminal|desktop|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21964" PostTypeId="2" ParentId="21962" CreationDate="2020-01-07T21:28:18.377" Score="0" Body="&lt;p&gt;Probably there is a command from terminal without extra packages, but if you install &lt;strong&gt;xdotool&lt;/strong&gt; you can run terminal commands to emulate keyboard shortcuts. You can install it by &lt;code&gt;sudo apt install xdotool&lt;/code&gt; and if you didn't change the default keyboard shortcut for Multytask View you can launch it from terminal (or a custom script) by &lt;code&gt;xdotool key super+s&lt;/code&gt;. Using xdotool you can assign to a gesture any keyboard shortcut you have or define using System Preferences for example. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sources: &lt;a href=&quot;https://www.semicomplete.com/projects/xdotool/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.semicomplete.com/projects/xdotool/&lt;/a&gt;&#xA;&lt;a href=&quot;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://neal.codes/blog/adding-mac-like-touch-gestures-to-elementary-os&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-07T21:28:18.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21965" PostTypeId="2" ParentId="21960" CreationDate="2020-01-07T21:39:03.410" Score="1" Body="&lt;p&gt;what I suggest you is to install via terminal lightdm and pantheon-greeter also.&#xA;&lt;code&gt;sudo apt install lightdm pantheon-greeter&lt;/code&gt;. Then run &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-11-02T04:39:18.467" LastActivityDate="2020-11-02T04:39:18.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21966" PostTypeId="2" ParentId="21935" CreationDate="2020-01-07T22:05:55.937" Score="0" Body="&lt;p&gt;By default plank is into the cerbere applications list so if you did not removed it from there, it should launch again after you kill it. I do not know why you running plank from terminal, but if you just want to restart it use &lt;code&gt;killall plank&lt;/code&gt; instead if it is still in the cerbere list. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you are doing this in order to change the theme, the location of the warning message is read only so if you want to add a custom plank theme it is better to put it in &lt;code&gt;~/.local/share/plank/themes/&lt;/code&gt; folder. You can go into this location if you enable hidden files for your files application and navigate from home folder.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-07T22:05:55.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21967" PostTypeId="2" ParentId="21962" CreationDate="2020-01-07T22:21:38.847" Score="1" Body="&lt;p&gt;You can trigger this through dbus: &lt;code&gt;dbus-send --session --dest=org.pantheon.gala --print-reply /org/pantheon/gala org.pantheon.gala.PerformAction int32:1&lt;/code&gt;. This is how the .desktop file opens the multitasking view (&lt;a href=&quot;https://github.com/elementary/gala/blob/master/data/gala-multitaskingview.desktop.in&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/blob/master/data/gala-multitaskingview.desktop.in&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-07T22:21:38.847" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21968" PostTypeId="2" ParentId="21902" CreationDate="2020-01-07T22:23:27.037" Score="0" Body="&lt;p&gt;There is a section into their official web page for this. Just follow this link - &lt;a href=&quot;https://elementary.io/get-involved#design&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/get-involved#design&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-07T22:23:27.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21970" PostTypeId="1" CreationDate="2020-01-08T01:06:57.403" Score="0" ViewCount="61" Body="&lt;p&gt;before the update&#xA;I had the theme of Sierra Light Os&#xA;and it worked very well but very well&#xA;actually everything worked fine&#xA;but after the update I have some problems&#xA;with minimize buttons&#xA;and the appearance of the application center doesn't look good too.&lt;/p&gt;&#xA;" OwnerUserId="20175" LastActivityDate="2024-01-18T07:06:45.767" Title="upgrade 01 january 2020" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21972" PostTypeId="1" CreationDate="2020-01-08T03:45:25.207" Score="1" ViewCount="247" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WzAVK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WzAVK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;All my apps in elementary OS have a minimize button, but when it comes to VLC player, it doesn't have minimize button, please help.&lt;/p&gt;&#xA;" OwnerUserId="20178" LastActivityDate="2022-08-21T19:06:50.690" Title="My VLC player doesn't have minimize button" Tags="|release-hera|vlc|" AnswerCount="6" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21973" PostTypeId="1" CreationDate="2020-01-08T04:01:59.250" Score="0" ViewCount="70" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FjCJl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FjCJl.png&quot; alt=&quot;&quot;&gt;&lt;/a&gt;&#xA;Every time i open a new terminal, it open with 2 tabs, its so annoying and i dont know how i resolve this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ask in a eOS group on telegram but nobody its able to help me and some people have this problem too..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone can save me ?&#xA;(i'm using eOS Hera 5.1)&lt;/p&gt;&#xA;" OwnerUserId="20177" LastActivityDate="2020-01-08T04:26:40.550" Title="Double &quot;Home&quot; tab on terminal when i open it" Tags="|pantheon-terminal|release-hera|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21974" PostTypeId="2" ParentId="21973" CreationDate="2020-01-08T04:26:40.550" Score="1" Body="&lt;p&gt;This is a known bug with terminal (&lt;a href=&quot;https://github.com/elementary/terminal/issues/444&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal/issues/444&lt;/a&gt;) there is a pull request that claims to fix this so hopefully if that gets merged the next update can correct the behaviour.&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-08T04:26:40.550" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21975" PostTypeId="2" ParentId="14134" CreationDate="2020-01-08T06:54:05.310" Score="0" Body="&lt;p&gt;I just installed this&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/abraunegg/onedrive&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/abraunegg/onedrive&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And it works fine. You just need to follow every step in order.&lt;/p&gt;&#xA;" OwnerUserId="20179" LastActivityDate="2020-01-08T06:54:05.310" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21977" PostTypeId="1" CreationDate="2020-01-08T12:24:41.350" Score="0" ViewCount="180" Body="&lt;p&gt;I have a Microsoft Surface Laptop 3. I tried to boot up elementary on a USB stick but it just goes blank after grub. Here are the things I tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;disabled secure boot&lt;/li&gt;&#xA;&lt;li&gt;tried nomodeset acpi=off kernel parameters&lt;/li&gt;&#xA;&lt;li&gt;removed the quiet and splash kernel parameters&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Nothing works. After pressing enter in grub the screen goes blank and is stuck. Even with the quiet parameter removed it shows nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="15872" LastEditorUserId="15904" LastEditDate="2020-01-10T10:18:58.297" LastActivityDate="2024-02-18T18:05:35.667" Title="Installing 5.1 hangs in boot" Tags="|system-installation|release-hera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21979" PostTypeId="1" CreationDate="2020-01-08T15:33:40.930" Score="0" ViewCount="53" Body="&lt;p&gt;compare the look of google chrome and vlc, visual studio code&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sure you already saw the minimize buttons in snapcraft applications vlc and vcode do not appear and also appear differently than chrome&lt;/p&gt;&#xA;&#xA;&lt;p&gt;all native and elementary store apps work fine but snapcraft apps like vlc and vcode don't work well&lt;/p&gt;&#xA;&#xA;&lt;p&gt;before the last system update everything worked fine in all applications including snapcraft&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CsNkZ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CsNkZ.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20175" LastActivityDate="2024-01-20T13:05:15.717" Title="simple problem apps snapcraft - minimize buttons" Tags="|minimize|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21980" PostTypeId="1" CreationDate="2020-01-08T15:52:29.233" Score="0" ViewCount="227" Body="&lt;p&gt;The OS does not recognize M2 PCI class 35 solid state drives. (Dell Latitude 3400)&#xA;someone knows how to install it on this type of disks.&lt;/p&gt;&#xA;" OwnerUserId="20187" LastActivityDate="2020-06-07T18:00:20.033" Title="install elementary os on M2 Solid state drive" Tags="|install|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21981" PostTypeId="2" ParentId="21970" CreationDate="2020-01-08T15:56:30.173" Score="0" Body="&lt;p&gt;Can you check out does the default elementary os theme works well? If it is ok, you have to wait for an update of the SieraLightOs theme or choose another one. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-08T15:56:30.173" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21982" PostTypeId="1" CreationDate="2020-01-08T16:50:58.097" Score="0" ViewCount="77" Body="&lt;p&gt;Elementary 5.1 Hera&#xA;NetworkManager v 1.10.6&#xA;Lenovo Yoga 13 inch, Intel i5&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My NetworkManager randomly drops wifi communications.  Wifi signal strength drops to around 50% but a connection is indicated but there nothing loads into a browser, Firefox v 71.0 in this case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried turning off power management but no joy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Wifi adapter is RTL8822BE 802.11a/b/g/n/ac. I installed the latest driver but again no joy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed from the journalctl output that NetworkManager is unable to open /run/network/ifstate because that directory and file does not exist on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a persistent USB version of Zorin which does not have the same or similar issue.  I noted that Zorin does have /run/network/ifstate installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a permanent solution to this problem?&lt;/p&gt;&#xA;" OwnerUserId="20164" LastActivityDate="2024-01-18T02:08:21.023" Title="Wifi service stops randomy" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21983" PostTypeId="2" ParentId="21982" CreationDate="2020-01-08T17:46:21.093" Score="0" Body="&lt;p&gt;I have the same adapter (in a Lenovo Legion Y530) and I had to turn &lt;a href=&quot;https://en.wikipedia.org/wiki/Active_State_Power_Management&quot; rel=&quot;nofollow noreferrer&quot;&gt;aspm&lt;/a&gt; off for the wireless adapter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new &lt;code&gt;r8822be.conf&lt;/code&gt; file in &lt;code&gt;/etc/modprobe.d/&lt;/code&gt;, with the following contents:&lt;br&gt;&#xA;&lt;code&gt;options r8822be aspm=0&lt;/code&gt;&lt;br&gt;&#xA;After this, I also had to turn off the laptop, unplug the charger, wait for a few minutes, and turn it back on. No more wireless issues after this.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-08T17:46:21.093" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21985" PostTypeId="2" ParentId="21977" CreationDate="2020-01-08T17:50:58.980" Score="0" Body="&lt;p&gt;If you press ESC on boot (where the logo appears), you should be able to see the debug messages of boot process.&lt;/p&gt;&#xA;" OwnerUserId="20189" LastActivityDate="2020-01-08T17:50:58.980" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21986" PostTypeId="1" AcceptedAnswerId="21988" CreationDate="2020-01-08T17:57:04.373" Score="1" ViewCount="187" Body="&lt;p&gt;My previous experiences with using transparency (on Windows) have indicated it causes serious battery drain. I'm loving Hera, but the battery usage is very poor and I'm wondering if it has to do (at least partially) with transparency. I have used &quot;tlp&quot; but no noticeable improvement.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the page on turning off transparency on Loki and Freya but it didn't work for me.  I also tried &quot;System Settings &gt;&gt; Desktop &gt;&gt; Appearance&quot; to switch &quot;Panel translucency&quot; to both settings but no luck.  Every time I open a new Terminal it is transparent. Only when I lock it to one side of the screen does it lose transparency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So how do I turn off ALL transparency on Hera?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: The answer helped me turn off transparency on Terminals but that did NOT lead to any noticeable improvement in battery usage.&lt;/p&gt;&#xA;" OwnerUserId="19891" LastEditorUserId="19891" LastEditDate="2020-01-09T03:34:30.980" LastActivityDate="2020-01-09T03:34:30.980" Title="Could terminal transparency be causing battery drain in Hera?" Tags="|release-hera|battery|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21988" PostTypeId="2" ParentId="21986" CreationDate="2020-01-08T18:16:57.520" Score="2" Body="&lt;p&gt;Running this command will remove the transparency effect in Terminal:&lt;br&gt;&#xA;&lt;code&gt;gsettings set io.elementary.terminal.settings background 'rgb(46, 46, 46)'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To return to default, run:&lt;br&gt;&#xA;&lt;code&gt;gsettings set io.elementary.terminal.settings background 'rgba(46, 46, 46, 0.95)'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let us know if this affects battery life or not :)&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-08T18:16:57.520" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21989" PostTypeId="2" ParentId="21980" CreationDate="2020-01-08T18:43:28.930" Score="1" Body="&lt;p&gt;in Bios configure your sata to ahci mode&lt;/p&gt;&#xA;" OwnerUserId="19745" LastActivityDate="2020-01-08T18:43:28.930" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21990" PostTypeId="1" CreationDate="2020-01-08T18:47:08.950" Score="0" ViewCount="1170" Body="&lt;p&gt;I am a relative noob. I have done a fresh install of Elementary OS 5.1 and I can't seem to get my WiFi working.&#xA;Below is the output of lshw and iwconfig.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pshone@Mecer:~$ sudo lshw -c network&#xA;[sudo] password for pshone:         &#xA;  *-network                 &#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       logical name: enp1s0&#xA;       version: 07&#xA;       serial: 00:e0:4c:40:e5:01&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8168 driverversion=8.045.08-NAPI duplex=half latency=0 link=no multicast=yes port=twisted pair speed=100Mbit/s&#xA;       resources: irq:45 ioport:3000(size=256) memory:aa000000-aa000fff memory:c0000000-c0003fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       physical id: 2&#xA;       bus info: usb@2:6&#xA;       logical name: wlxac5d5c4d601a&#xA;       serial: ac:5d:5c:4d:60:1a&#xA;       capabilities: ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rtl8xxxu driverversion=5.0.0-37-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11&#xA;pshone@Mecer:~$ iwconfig&#xA;enp1s0    no wireless extensions.&#xA;&#xA;lo        no wireless extensions.&#xA;&#xA;wlxac5d5c4d601a  IEEE 802.11  ESSID:off/any  &#xA;          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm   &#xA;          Retry short limit:7   RTS thr=2347 B   Fragment thr:off&#xA;          Power Management:off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please can someone help?&lt;/p&gt;&#xA;" OwnerUserId="18037" LastActivityDate="2024-02-18T12:02:45.357" Title="WiFi not working on fresh install of Elementary OS 5.1" Tags="|wifi|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21991" PostTypeId="1" CreationDate="2020-01-08T19:00:10.667" Score="0" ViewCount="219" Body="&lt;p&gt;Problem: First, I see similar questions but everything points to a blinking cursor.  I do not have a blinking cursor but black screen with a (non-blinking) underscore in the upper left OR I am stuck at grub. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Background: Elementary was working fine til yesterday on my iMac (wiped to run only Elementary) until I tried to run a Python script in attempting to install Proton VPN. It didn't work, but I continued to use the computer until I started it this morning and got the black screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Actions &amp;amp; results: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1)Start system with power button: &#xA;Displays &quot;System BootOrder not found&quot; then loads the choices to do: &#xA;a)Elementary OS&gt; black screen; upper left non-blinking underscore&lt;/p&gt;&#xA;&#xA;&lt;p&gt;b)Advanced Options&gt; Recovery Mode&gt; a long output with a plain underscore (non-blinking), can't input anything (pic 1)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;c)I can get to GRUB but after running everything I've seen in the past 3 hours on how to fix Elementary from Grub, I can do nothing. I can't get a Terminal screen either to run commands or even a shred or dd command (which is what I want to do at this point).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, I can't reinstall my Mac OS to wipe it all to reinstall the Elementary USB.  Secondhand mac has DVD/CD drive but came with preloaded OS which I wiped, confident I'd love Elementary. I DO, but I realized I screwed something up trying to install Proton VPN yesterday and running the software update from Applications. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help much appreciated. I've tried all related solutions here but saw none with non-blinking cursor. I'd also appreciate how to wipe or DD or shred this system to start fresh since i already flashed the Elementary install on the disk. But again, it will not load from that (I've been researching for 3 hours and see no way to do that without access to Terminal since I'm stuck in Grub). &lt;/p&gt;&#xA;" OwnerUserId="20191" LastActivityDate="2020-01-08T19:00:10.667" Title="Stuck on grub; with USB Elementary install stuck on black screen with flat underscore (not blinking)--please help?" Tags="|black-screen|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="21992" PostTypeId="2" ParentId="21905" CreationDate="2020-01-08T19:05:53.100" Score="1" Body="&lt;p&gt;The idea would be to tell lightdm to use the same settings that you use for the monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, login into elementary with the external monitor connected, set up your displays the way you want in System Settings -&gt; Displays (mark the external display as primary by clicking its star in the upper left corner). Save you configuration.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, copy the &lt;code&gt;~/.config/monitors.xml&lt;/code&gt; file to &lt;code&gt;/var/lib/lightdm/.config/&lt;/code&gt; (you'll need sudo for this).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot and hope for the best.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another way is detailed here &lt;a href=&quot;https://www.reddit.com/r/SolusProject/comments/8coffz/multimonitor_config_for_greeter/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Multi-monitor config for greeter&#xA;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: if using cp to copy the file, you'll have to use the &lt;code&gt;--remove-destination&lt;/code&gt; flag to avoid the &lt;code&gt;cp: not writing through dangling symlink&lt;/code&gt; warning:&lt;br&gt;&#xA;&lt;code&gt;sudo cp --remove-destination ~/.config/monitors.xml /var/lib/lightdm/.config/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-01-09T06:22:43.267" LastActivityDate="2020-01-09T06:22:43.267" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="21994" PostTypeId="2" ParentId="21972" CreationDate="2020-01-09T01:31:02.547" Score="0" Body="&lt;p&gt;You can install Tweaks and check window controls in Appearance tab. On layout you can choose your style&lt;/p&gt;&#xA;" OwnerUserId="19719" LastActivityDate="2020-01-09T01:31:02.547" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21996" PostTypeId="1" AcceptedAnswerId="22004" CreationDate="2020-01-09T03:05:58.730" Score="2" ViewCount="279" Body="&lt;p&gt;I just really want my EOS good again. Today's update makes my EOS Hera not good / comfortable anymore. Here's the problem:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1.&lt;/strong&gt; Minimize button is dissappear on some apps like &lt;em&gt;Blender, Inkscape, and Chromium&lt;/em&gt;. Even after setting it up on &lt;em&gt;Tweaks&lt;/em&gt; Settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6CLLK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6CLLK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2.&lt;/strong&gt; I can't disable &lt;em&gt;dynamic-workspaces&lt;/em&gt; anymore. Via command line or via &lt;em&gt;dconf&lt;/em&gt; editor. Both didn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Actually i like &lt;em&gt;dynamic-workspaces&lt;/em&gt;, but the fullscreen behaviour is the problem for me. It switching the workspace, also it create an issue to some apps. I hope i can fullscreen several windows in current workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should i wait for another updates? or there are solution? Thanks&lt;/p&gt;&#xA;" OwnerUserId="19908" LastActivityDate="2020-01-11T05:59:19.873" Title="Elementary OS Hera updates create problems" Tags="|updates|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="21997" PostTypeId="1" CreationDate="2020-01-09T03:55:56.430" Score="0" ViewCount="35" Body="&lt;p&gt;I installed elementary os, but I don't know how to go from windows to elementary, and in the list of systems it doesn't appear&lt;/p&gt;&#xA;" OwnerUserId="20197" LastActivityDate="2020-01-09T06:59:10.340" Title="I INSTALLED THE OS BUT I DONT KNOW HOW TO CHANGE FROM WINDOWS TO ELEMENTARY" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="21998" PostTypeId="2" ParentId="21997" CreationDate="2020-01-09T06:59:10.340" Score="1" Body="&lt;p&gt;what do you mean by that exactly? Is elementary invisible in your BIOS? What happens if you select the partition that you installed it on?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it just stays that way check if you have FastBoot enabled and Legacy Boot disabled. However I would require more detailed information for further assistance.&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2020-01-09T06:59:10.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22000" PostTypeId="1" CreationDate="2020-01-09T13:19:40.920" Score="0" ViewCount="426" Body="&lt;p&gt;I install Elementary Os 5.1 in HP pavilion notebook. after installing HP Notebook enter grub rescue mode and does not find &quot;error: file '/grub/i386-pc/normal.mod' not found&quot;&lt;/p&gt;&#xA;" OwnerUserId="19917" LastEditorUserId="15904" LastEditDate="2020-01-10T10:19:02.370" LastActivityDate="2020-05-10T10:37:00.713" Title="Grub Problem after installing Elementary OS 5.1" Tags="|system-installation|boot|grub|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22001" PostTypeId="2" ParentId="21990" CreationDate="2020-01-09T15:15:49.483" Score="0" Body="&lt;p&gt;Many laptops don't have wifi drivers installed by default.&#xA;What you have to do, is find a way to connect to the internet. Once you have internet, going in the &quot;app store&quot; will allow you to see and install the latest nvidia or other drivers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the ways to get internet:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Ethernet&#xA;(if you have an ethernet port, just plug your laptop)&lt;/li&gt;&#xA;&lt;li&gt;Shared Cellular connexion&#xA;(I had to resolve to do that, since my laptop didn't have ethernet ports). I used the shared connexion via USB feature on my Android phone, and connected it to the computer.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Hope that helps !&lt;/p&gt;&#xA;" OwnerUserId="19074" LastActivityDate="2020-01-09T15:15:49.483" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22003" PostTypeId="2" ParentId="22000" CreationDate="2020-01-09T19:43:47.423" Score="0" Body="&lt;p&gt;tray boot-repair-disk &lt;a href=&quot;https://sourceforge.net/projects/boot-repair-cd/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://sourceforge.net/projects/boot-repair-cd/files/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or super-grub-disk&lt;/p&gt;&#xA;" OwnerUserId="10558" LastActivityDate="2020-01-09T19:43:47.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22004" PostTypeId="2" ParentId="21996" CreationDate="2020-01-09T21:01:13.203" Score="3" Body="&lt;p&gt;There is a new update in order to make not only fullscreen but also maximized applications to go to a new space automatically and there is a &lt;strong&gt;call for testing&lt;/strong&gt; on another website. Probably because of this feature the option for switching on and off the dynamic workspaces is removed, I cannot say if it will be changed or not after the next updates, but for the present moment there are some fixes: &lt;/p&gt;&#xA;&#xA;&lt;h1&gt;1. Buttons layout fix&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;If you want the buttons to be on the right side, move the semicolon(:) before their names&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences button-layout 'close,minimize,maximize:'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;2. An option to change the fullscreen behaviour&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;prevents opening a fullscreen app on a new space for me. Replace the false with true on the line above in order to restore the default behaviour.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-01-11T05:59:19.873" LastActivityDate="2020-01-11T05:59:19.873" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22007" PostTypeId="2" ParentId="21972" CreationDate="2020-01-10T02:38:24.607" Score="0" Body="&lt;p&gt;If you are on Hera in the AppCenter app look for &quot;GNOME Tweaks&quot; and install that.  After it downloads click open.  On the Window tab there is &quot;Minimize&quot; switch that you can flip on to show the minimize on the GNOME apps.&lt;/p&gt;&#xA;" OwnerUserId="20206" LastActivityDate="2020-01-10T02:38:24.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22008" PostTypeId="1" AcceptedAnswerId="22022" CreationDate="2020-01-10T10:00:13.233" Score="6" ViewCount="2356" Body="&lt;p&gt;Since yesterday, when I try to update those two recommended items, the process fails and the updates are still showing. Sometimes, but not always, AppCenter crashes and closes.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/j39bi.png&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j39bi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;All other updates are working fine, I am on Hera 5.1, Dell XPS 9550.&lt;/p&gt;&#xA;&lt;p&gt;Anyone else and/or ideas?&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;After having tried the latest answer with no luck, I tried this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;edo@XPS:~$ flatpak install org.gnome.platform&#xA;Looking for matches…&#xA;Found similar ref(s) for ‘org.gnome.platform’ in remote ‘flathub’ (user).&#xA;Use this remote? [Y/n]: Y&#xA;Similar refs found for ‘org.gnome.platform’ in remote ‘flathub’ (user):&#xA;&#xA;   1) runtime/org.gnome.Platform.Compat.i386/x86_64/3.34&#xA;   2) runtime/org.gnome.Platform/x86_64/3.24&#xA;   3) runtime/org.gnome.Platform/x86_64/3.28&#xA;   4) runtime/org.gnome.Platform/x86_64/3.26&#xA;   5) runtime/org.gnome.Platform/x86_64/3.32&#xA;   6) runtime/org.gnome.Platform/x86_64/3.30&#xA;   7) runtime/org.gnome.Platform/x86_64/3.34&#xA;&#xA;Which do you want to use (0 to abort)? [0-7]: 7&#xA;Skipping: org.gnome.Platform/x86_64/3.34 is already installed&#xA;edo@XPS:~$ flatpak install org.kde.platform&#xA;Looking for matches…&#xA;Found similar ref(s) for ‘org.kde.platform’ in remote ‘flathub’ (user).&#xA;Use this remote? [Y/n]: Y&#xA;Similar refs found for ‘org.kde.platform’ in remote ‘flathub’ (user):&#xA;&#xA;   1) runtime/org.kde.PlatformTheme.QGnomePlatform/x86_64/5.9&#xA;   2) runtime/org.kde.Platform/x86_64/5.12&#xA;   3) runtime/org.kde.Platform/x86_64/5.13&#xA;   4) runtime/org.kde.Platform/x86_64/5.10&#xA;   5) runtime/org.kde.Platform/x86_64/5.11&#xA;   6) runtime/org.kde.PlatformTheme.QGnomePlatform/x86_64/5.10&#xA;   7) runtime/org.kde.PlatformTheme.QGnomePlatform/x86_64/5.13&#xA;   8) runtime/org.kde.PlatformTheme.QGnomePlatform/x86_64/5.11&#xA;   9) runtime/org.kde.PlatformTheme.QGnomePlatform/x86_64/5.12&#xA;  10) runtime/org.kde.Platform/x86_64/5.9&#xA;&#xA;Which do you want to use (0 to abort)? [0-10]: 3&#xA;Skipping: org.kde.Platform/x86_64/5.13 is already installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;No luck either though.&lt;/p&gt;&#xA;&lt;p&gt;At this point, if no one else if affected by this and there is no solution, I hope that the next time those packages will be updated, it will automatically work. Hopefully? Maybe? :)&lt;/p&gt;&#xA;" OwnerUserId="16104" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-05-13T07:48:52.290" Title="AppCenter can't update Flatpak packages" Tags="|updates|appcenter|release-hera|crash|flatpak|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22009" PostTypeId="1" CreationDate="2020-01-10T10:02:02.763" Score="0" ViewCount="389" Body="&lt;p&gt;I had a setup with 4 fixed workspaces and it was working fine up until now but the setting is not correct anymore. It seems I have a dynamic workspace again with 1 workspace. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The following commands do not change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior dynamic-workspaces false&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences num-workspaces 4&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there another way of fixing the number of workspace to 4?&lt;/p&gt;&#xA;" OwnerUserId="19816" LastActivityDate="2020-02-16T20:00:43.857" Title="Problem with fix number of workspaces" Tags="|workspace|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22012" PostTypeId="2" ParentId="22009" CreationDate="2020-01-10T15:37:07.767" Score="1" Body="&lt;p&gt;There was an update which removed these gsettings keys and because of that they do not work anymore. I like this feature so I don't need it but I have found out that there is an option to stop going fullscreen on another space and make spaces fixed again by execution of &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter dynamic-workspaces false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I have test it a few times and it works for me, but I have enable it again, because I like the dynamic spaces option when you go fullscreen. In order to restore it, you can do it by exection of &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter dynamic-workspaces true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-10T15:37:07.767" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22013" PostTypeId="2" ParentId="22008" CreationDate="2020-01-10T15:44:49.340" Score="2" Body="&lt;p&gt;what I recommend you is to try to do this using command lines. Open your terminal application and execute &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;! without sudo&lt;/strong&gt;, otherwise you will receive an error message. Another option that works for me in a bit complicated situations is &lt;code&gt;sudo flatpak repair&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-10T15:44:49.340" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22015" PostTypeId="2" ParentId="21670" CreationDate="2020-01-10T20:53:42.260" Score="0" Body="&lt;p&gt;Apparently this is a &lt;a href=&quot;https://github.com/ximion/appstream&quot; rel=&quot;nofollow noreferrer&quot;&gt;appstream&lt;/a&gt; package bug. And resolved. Developer of appstream is &lt;a href=&quot;https://github.com/ximion/appstream/issues/264#issuecomment-570787579&quot; rel=&quot;nofollow noreferrer&quot;&gt;explained&lt;/a&gt; very well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Related issue reports:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/triage/issues/6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/6&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/ximion/appstream/issues/264&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ximion/appstream/issues/264&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="18424" LastActivityDate="2020-01-10T20:53:42.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22018" PostTypeId="1" AcceptedAnswerId="22019" CreationDate="2020-01-11T05:03:32.990" Score="0" ViewCount="103" Body="&lt;p&gt;I want to create another user account for my family to access computer how to do so &lt;/p&gt;&#xA;" OwnerUserId="20218" LastEditorUserId="16827" LastEditDate="2020-01-12T05:40:20.793" LastActivityDate="2020-01-12T05:40:20.793" Title="How to create another standard user account in os?" Tags="|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22019" PostTypeId="2" ParentId="22018" CreationDate="2020-01-11T05:39:36.197" Score="0" Body="&lt;p&gt;Open the System Settings application, navigate to &lt;strong&gt;User Accouns&lt;/strong&gt; (down right icon) . On the User Accouns section there is a smal &lt;strong&gt;+&lt;/strong&gt; sign into the lower left corner, hit it, autrhorize yourself as an Administrator and you will get a window with settings for the new account, Standart type should be the default one. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-11T05:39:36.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22020" PostTypeId="2" ParentId="21979" CreationDate="2020-01-11T05:48:22.610" Score="0" Body="&lt;p&gt;Can you check and accept the answer if this solution works for you - &lt;a href=&quot;https://elementaryos.stackexchange.com/a/22004/12483&quot;&gt;https://elementaryos.stackexchange.com/a/22004/12483&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please make a comment if this do not work.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-01-11T05:56:41.680" LastActivityDate="2020-01-11T05:56:41.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22022" PostTypeId="2" ParentId="22008" CreationDate="2020-01-11T09:03:20.527" Score="7" Body="&lt;p&gt;I have the same situation since yesterday morning. So far I haven't any solution but I found this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;According to &lt;a href=&quot;https://gitlab.com/freedesktop-sdk/freedesktop-sdk/issues/886&quot; rel=&quot;noreferrer&quot;&gt;Hector R on this issue on GitLab&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Step1&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;flatpak install org.freedesktop.Platform/x86_64/19.08&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step2&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;flatpak uninstall --unused&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Step3&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;&lt;code&gt;flatpak update&lt;/code&gt;&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;NOTE: in the latest step maybe the system update some packages and ask&#xA;  for download what you need and YES. After update the new packages run&#xA;  again flatpak update&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Then reboot.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;That's it&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;Hope helps.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;And after this my AppCenter says &quot;No components with updates&quot; so looks like the problem is solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, swnw&lt;/p&gt;&#xA;" OwnerUserId="20220" LastEditorUserId="16827" LastEditDate="2020-01-13T14:08:13.890" LastActivityDate="2020-01-13T14:08:13.890" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22023" PostTypeId="1" CreationDate="2020-01-11T11:30:12.153" Score="0" ViewCount="1139" Body="&lt;p&gt;1.while I was installing os it asks for erasing all the data on HDDs so it also deletes all the partitions on HDDs so now I want to create a 2 new partition on HDDs how to do that????&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Shortcut key for the option of the shutdown like we have in win10 alt+f4 and the option comes to the shutdown, restart, and other options...&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The steam app which I install from the app center is not working working what to do....?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20218" LastActivityDate="2024-02-21T23:08:51.077" Title="how to create new partition using Gparted inside elementary os?" Tags="|keyboard-shortcuts|files|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22025" PostTypeId="2" ParentId="22023" CreationDate="2020-01-11T14:22:47.993" Score="0" Body="&lt;p&gt;The easiest way is to create a USB key with Elementary Os and boot on this key. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Choose &quot;try&quot;, then using Gparted, it is then very simple to shrink the partition which contains Elementary on the hard drive of the PC, then to create a new partition with the amount of available space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have a nice week end !&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Jean-Louis / France.&lt;/p&gt;&#xA;" OwnerUserId="20222" LastActivityDate="2020-01-11T14:22:47.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22026" PostTypeId="1" CreationDate="2020-01-11T16:19:17.613" Score="0" ViewCount="88" Body="&lt;p&gt;This bug appears identical to that described in&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8192/i-am-unable-to-update-or-install-software-in-the-appcenter&quot;&gt;I am unable to update or install software in the AppCenter&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;however none of the fixes suggested there (reinstalling packageit, reinstalling appcenter and all the dependencies needed to build it) worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem started when I accidentally hit &quot;Authenticate&quot; prior to typing my password during a routine upgrade in appcenter, after which it wouldn't let me type in my password any more, so I killed it and tried again, with the above results.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;HELP!&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2024-01-21T06:03:00.353" Title="&quot;No Results. No apps could be found. Try changing search terms.&quot;" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22027" PostTypeId="2" ParentId="22026" CreationDate="2020-01-11T17:02:03.760" Score="0" Body="&lt;p&gt;Problem went away after a reboot. Ggggeeeeerrrrrr!&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2020-01-11T17:02:03.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22029" PostTypeId="1" CreationDate="2020-01-11T18:25:55.987" Score="0" ViewCount="720" Body="&lt;p&gt;I using elementary OS 5.1 Hera.&lt;br&gt;&#xA;My pc wifi adapter is D-link dwa 123.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I didn't have this problem after installing Elementary os, but after rebooting, this problem occurred.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8vr4Y.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8vr4Y.jpg&quot; alt=&quot;Problem&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20223" LastActivityDate="2024-03-29T04:09:31.180" Title="Wireless connection always disabled in elementary OS 5.1 Hera" Tags="|wifi|release-hera|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22031" PostTypeId="1" CreationDate="2020-01-11T20:57:05.170" Score="0" ViewCount="96" Body="&lt;p&gt;I am not sure if this is appropriate, but I just spent a week trying to install either Jupiter or Hera on an old MacBook from 2009 that just got phased out of surfing the web, due to browser incompatibility. It sucks.  I was taken in by the news about the simplicity, ease of use, aesthetics, etc. etc.  I was pumped.  Then I tried to do it.  Error after error.  Oh well, maybe it's time to unplug and live in the physical world again.  It's just tough to communicate with everyone else sucked into the digital world.  No offense intended.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ugh&lt;/p&gt;&#xA;" OwnerUserId="20224" LastActivityDate="2020-01-12T10:45:54.270" Title="excuse me, but; os can't be installed on 2009 MacBook" Tags="|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22035" PostTypeId="1" CreationDate="2020-01-12T08:35:33.183" Score="0" ViewCount="464" Body="&lt;p&gt;I've added a new collection account on Evolution to display all my calendars like I do on KOrganizer but on Evolution, even though they show up on the list on the left as enabled, there is no events in the main schedule.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So far I've tried adding the calendars individually and adding them by selecting &quot;on the Web&quot; in the setup wizard, but none of them showed the events in the end. Only adding them as .ics files by downloading them from Nextcloud and adding them by import worked, though I don't know how I would then sync them back to the cloud if I used that option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm on elementary OS 5.1 and using Evolution 3.34.3 from Flatpak/Flathub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did anyone encountered a problem like this, and if so is there any solution?&lt;/p&gt;&#xA;" OwnerUserId="19949" LastActivityDate="2024-02-23T00:01:55.217" Title="Evolution Calendar doesn't show CalDAV events" Tags="|release-hera|calendar|evolution|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22036" PostTypeId="1" CreationDate="2020-01-12T09:25:01.817" Score="1" ViewCount="1090" Body="&lt;p&gt;I ran into issue while trying to update my OS 0.4.1 to the latest version through the &lt;em&gt;AppCenter&lt;/em&gt; and got the following error message:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;W: The repository 'http://archive.canonical.com loki Release' does not have a Release file.&lt;br /&gt;&#xA;W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&lt;br /&gt;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&lt;br /&gt;&#xA;W: The repository 'http://ppa.launchpad.net/versable/elementary-update/ubuntu xenial Release' does not have a Release file.&lt;br /&gt;&#xA;W: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.&lt;br /&gt;&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;What should I do? I don't want to have to buy a new license in order to download the 5.1 version. :)&lt;/p&gt;&#xA;" OwnerUserId="20228" LastEditorUserId="27023" LastEditDate="2022-09-29T21:35:38.547" LastActivityDate="2022-09-29T21:35:38.547" Title="How to update from 0.4.1 Loki to 5.1 Hera" Tags="|release-loki|updates|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22037" PostTypeId="2" ParentId="22036" CreationDate="2020-01-12T10:26:41.273" Score="2" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;trying to update my OS 0.4.1 to the latest version  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The ability to easily upgrade to the new version has only been introduced in elementary OS 5.0. I believe this was also the reason behind the version numbering shift.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I don't whant to buy new license to download the 5.1 version. :)  &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You do not need to buy a new licence. elementary OS is free and open source, users are just encouraged to donate to the elementary OS team when they they download the iso (after all, developers need to eat). The 'pay what you want' model allows for typing a custom value, including 0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZtRVz.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZtRVz.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, download a new 5.1 .iso, backup your files, and install the new version. Unfortunately, there is no &lt;strong&gt;practical&lt;/strong&gt; way of updating from the AppCenter from the 0.4 to 5.1. From 5.0 upward though, re-installs are no longer necessary.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-12T10:26:41.273" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22038" PostTypeId="2" ParentId="22031" CreationDate="2020-01-12T10:45:54.270" Score="1" Body="&lt;p&gt;Welcome to the elementary OS StackExchange.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Then I tried to do it. Error after error.   &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;It would be useful to include these errors in your question. No relevant help can be provided when no relevant information is supplied. &lt;strong&gt;Please&lt;/strong&gt; read on &lt;a href=&quot;https://stackoverflow.com/help/how-to-ask&quot;&gt;How do I ask a good question&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;old MacBook from 2009&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There is a huge number of tutorials available online for this, including some videos:&lt;br&gt;&#xA;&lt;a href=&quot;https://aroman.github.io/elementary-on-a-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How-to: Install elementaryOS and macOS on a Mac&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/dktg1e/macbook_white_late_2009_running_elementaryos_50/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MacBook White - Late 2009 Running elementaryOS 5.0 Juno&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://github.com/aroman/elementary-on-a-mac&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installing elementary OS alongside macOS&lt;/a&gt;&lt;br&gt;&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=7XDsKxVTw-o&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to easily install Linux (Elementary OS) on a Macbook&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please go over the above links, try the procedures described, and return here (update your question) to include more details about the encountered difficulties.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-12T10:45:54.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22039" PostTypeId="2" ParentId="22029" CreationDate="2020-01-12T12:05:30.533" Score="0" Body="&lt;p&gt;I have this problem sometimes, disabling the wireless network using the button top right and endabling it again usually works for me.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-12T12:05:30.533" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22040" PostTypeId="1" AcceptedAnswerId="22050" CreationDate="2020-01-12T13:29:54.330" Score="3" ViewCount="6012" Body="&lt;p&gt;I'm using Hera and would like to install Docker. I followed the install instructions&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://docs.docker.com/install/linux/docker-ce/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.docker.com/install/linux/docker-ce/ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;starting at &lt;strong&gt;Install using the repository&lt;/strong&gt;. I'm getting stuck at point two of &lt;strong&gt;INSTALL DOCKER ENGINE - COMMUNITY&lt;/strong&gt;. When running&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ sudo apt-get install docker-ce docker-ce-cli containerd.io&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the following error message&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package docker-ce is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;E: Package 'docker-ce' has no installation candidate&#xA;E: Unable to locate package docker-ce-cli&#xA;E: Unable to locate package containerd.io&#xA;E: Couldn't find any package by glob 'containerd.io'&#xA;E: Couldn't find any package by regex 'containerd.io'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Maybe the problem is related to this one here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1030179/package-docker-ce-has-no-installation-candidate-in-18-04&quot;&gt;https://askubuntu.com/questions/1030179/package-docker-ce-has-no-installation-candidate-in-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you would like to see my installation process for reproduction:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://hatebin.com/fmvfvfysqc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hatebin.com/fmvfvfysqc&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;How can I solve the problem and get the docker community edition?&lt;/li&gt;&#xA;&lt;li&gt;I installed some dependencies and maybe I will get problems if I install other dependencies now. It would be awesome if you would provide a cleanup if your solution requires different installations :)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19410" LastActivityDate="2020-01-13T08:09:11.790" Title="installing Docker community edition fails with missing docker-ce package" Tags="|software-installation|release-hera|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22041" PostTypeId="2" ParentId="14884" CreationDate="2020-01-12T13:52:27.090" Score="0" Body="&lt;p&gt;I usually press an Esc key when I am working with large number of folders or files and want to make sure that I only have 1 selected.&#xA;If you press Esc, then all highlights are reset and you can select whichever file you want. You can get used to it very quickly, took me 1 file sorting session to master it :)&lt;/p&gt;&#xA;" OwnerUserId="9888" LastActivityDate="2020-01-12T13:52:27.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22042" PostTypeId="2" ParentId="22040" CreationDate="2020-01-12T13:57:47.330" Score="2" Body="&lt;p&gt;Have you tried installing it with a downloaded .deb installer? It seems that the cli file is sometimes inaccessible due to lack of support for a particular OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or have you tried using:&#xA;sudo apt install docker.io&lt;/p&gt;&#xA;" OwnerUserId="9888" LastEditorUserId="9888" LastEditDate="2020-01-12T14:09:39.497" LastActivityDate="2020-01-12T14:09:39.497" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22043" PostTypeId="2" ParentId="21945" CreationDate="2020-01-12T14:04:46.113" Score="0" Body="&lt;p&gt;Two possible solutions:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boxing: &lt;code&gt;IO? io { get; set; default = IO(); }&lt;/code&gt; Note the question mark. (Solution by David Hewitt)&lt;/li&gt;&#xA;&lt;li&gt;Removing get/set: &lt;code&gt;IO io;&lt;/code&gt; (Solution by thalexander)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="7394" LastActivityDate="2020-01-12T14:04:46.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22044" PostTypeId="1" AcceptedAnswerId="22048" CreationDate="2020-01-12T14:08:48.103" Score="0" ViewCount="180" Body="&lt;p&gt;Can't make &lt;code&gt;Gtk.TextView ()&lt;/code&gt; hexpand. Only expands to like 2/3 of parent and wraps words too early.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/stsdc/monitor/blob/d3685a314712e263987da942724432c3469108e6/src/Widgets/ProcessView/ProcessInfoView.vala#L52-L61&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/stsdc/monitor/blob/d3685a314712e263987da942724432c3469108e6/src/Widgets/ProcessView/ProcessInfoView.vala#L52-L61&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/elIfJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/elIfJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="7394" LastActivityDate="2020-01-12T21:41:49.440" Title="Can't make Gtk.TextView () fill whole parent Gtk.Box" Tags="|gtk|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22045" PostTypeId="2" ParentId="22008" CreationDate="2020-01-12T14:10:04.733" Score="1" Body="&lt;p&gt;@Travis So the conclusion is &quot;No luck either though.&quot;. &#xA;Actually it's my first time when I had update elementary os trouble. I think that elementary os creators should read elementaryos.stackexchange.com from time to time ;). Faltpak in their opinion is &quot;the  future for our AppCenter ecosystem&quot;.So I try to send them this link of troubles. Not so easy I'm trying to find, I thought. simple thing &quot;the contact&quot; :/. I have no Facebook and Twitter accounts - I deleted them, so I have no chance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards, swnw.&lt;/p&gt;&#xA;" OwnerUserId="20220" LastActivityDate="2020-01-12T14:10:04.733" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22048" PostTypeId="2" ParentId="22044" CreationDate="2020-01-12T21:41:49.440" Score="2" Body="&lt;p&gt;A lovely application you built here, I particularly like the native indicator! &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looking into your Application.css:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.command_wrapper {  &#xA;    background-color: #fdf6e3;  &#xA;    border-radius: 3px;  &#xA;    box-shadow: 0 1px 1px rgba(0, 0, 0, 0.12), 0 1px 2px rgba(0, 0, 0, 0.20);  &#xA;    padding: 5px;  &#xA;    padding-right: 190px; &#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In ProcessInfoView.vala (58:59), you are applying the 'command_wrapper' class to the command_wrapper Box widget:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;var command_wrapper = new Gtk.Box(Gtk.Orientation.VERTICAL, 0);&#xA;command_wrapper.get_style_context ().add_class (&quot;command_wrapper&quot;);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Tdi3p.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tdi3p.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Commenting the &lt;code&gt;padding-right: 190px&lt;/code&gt; line will result in the TextBox 'expanding' horizontally:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s4o8U.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s4o8U.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I believe it is worth mentioning that in dark mode, the text in the TextBox is unreadable:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TwwPy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TwwPy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-12T21:41:49.440" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22050" PostTypeId="2" ParentId="22040" CreationDate="2020-01-13T08:09:11.790" Score="4" Body="&lt;p&gt;The instructions point to adding their repository:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository \&#xA;   &quot;deb [arch=amd64] https://download.docker.com/linux/ubuntu \&#xA;   $(lsb_release -cs) \&#xA;   stable&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In elementary OS, &lt;code&gt;lsb_release -cs&lt;/code&gt; will output &lt;code&gt;hera&lt;/code&gt;, for which that repository does not contain anything.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1GNfg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1GNfg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, as elementary OS is based on Ubuntu 18.04 Bionic, you can easily replace &lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt;, like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository \&#xA;   &quot;deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, if you follow the instructions on their site, you'll end up with an incorrect repository in the &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb [arch=amd64] https://download.docker.com/linux/ubuntu hera stable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To fix this, edit the file and replace &lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run a &lt;code&gt;sudo apt update&lt;/code&gt; and make sure it outputs no errors.&lt;br&gt;&#xA;Now, &lt;code&gt;sudo apt install docker-ce docker-ce-cli containerd.io&lt;/code&gt; runs as expected:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following additional packages will be installed:&#xA;  aufs-tools cgroupfs-mount pigz&#xA;The following NEW packages will be installed:&#xA;  aufs-tools cgroupfs-mount containerd.io docker-ce docker-ce-cli pigz&#xA;0 upgraded, 6 newly installed, 0 to remove and 17 not upgraded.&#xA;Need to get 85,5 MB of archives.&#xA;After this operation, 384 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After the installation completes, running &lt;code&gt;docker -v&lt;/code&gt;:&#xA;&lt;code&gt;Docker version 19.03.5, build 633a0ea838&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They do state this in the instructions:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/eaOTV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eaOTV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-13T08:09:11.790" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22051" PostTypeId="1" CreationDate="2020-01-13T10:16:07.497" Score="0" ViewCount="129" Body="&lt;p&gt;I'm using firefox installed with snap. My current version is 72.0.1, I have &lt;code&gt;webgl.force-enable: true&lt;/code&gt; and &lt;code&gt;webgl.disabled: false&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Going to &lt;a href=&quot;https://codesandbox.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://codesandbox.io/&lt;/a&gt; is not working and I get this error in the js console:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;THREE.WebGLRenderer: Error creating WebGL context.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As long as I remember I've never been able to get WebGl working on firefox with elementary. Did someone made it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help appreciated :)&lt;/p&gt;&#xA;" OwnerUserId="16914" LastActivityDate="2020-05-04T20:02:46.517" Title="Webgl not working on firefox" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22052" PostTypeId="1" CreationDate="2020-01-13T13:13:32.987" Score="0" ViewCount="97" Body="&lt;p&gt;First post here so HI THERE!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm really interested in eOS, especially after the liveusb test and want to install it now for long term testing.&#xA;I bother about my other installed distros because I experienced problems with installing further distros on another laptop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My main Distro is Linux mint 19.2 Cinnamon so far and I got Win7 installed as well. First choice in the grub menue is Lmint. Is there a safe way to install eOS as a third distro without harming my actual system? I have to admit that I'm still a very low experienced user so if something goes wrong it would mean bigger trouble to me automatically. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Would you risk it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;br&gt;&#xA;Jo&lt;/p&gt;&#xA;" OwnerUserId="20240" LastEditorUserId="16827" LastEditDate="2020-01-13T14:13:00.780" LastActivityDate="2020-01-13T14:55:03.573" Title="Installing elementary OS as third dist for testing" Tags="|system-installation|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22054" PostTypeId="2" ParentId="22052" CreationDate="2020-01-13T14:55:03.573" Score="1" Body="&lt;p&gt;Of course you can do it easily !&#xA;First of all, you need to create new partitions for eOS Distro (including his own swap if you have one for Mint (if both use the same swap, it's could have effect if you hibernate one and you boot the other one).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you install eOS, or every linux distribution, by default an installation of grub is part of the linux distro installation. And grub can detect you windows, your mint and your eOS.&#xA;If you don't want to risk anything, do not install grub when you install eOS. After that, boot on your mint distribution. Then update your grub list using &lt;code&gt;sudo update-grub&lt;/code&gt; and the new eOS will appear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The best way to install multiple distro without risking anything between them is to use UEFI Bios and GPT partitions. If you do that, you can boot directly from the UEFI bios into your prefered partition which contains OS. But for that, you need to setup your bios as an UEFI bios and all your installation must be in GPT mode (and not MBR). If your current installation is not UEFI, this is a lot of work and risks. But for my PC, I have this installation and I can boot from UEFI bios even I destroy an OS boot, an SSD or whatever.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Advantage : &#xA;Boot faster because your boot a partition, not the GRUB Loader. (I boot directly into windows, I press F8 while my BIOS is booting to get more choices (Hackintosh/Windows 10 for me), I press F2 to setup default configuration into my UEFI bios directly.&#xA;No dependency between your loader (because there is no loader like GRUB) and your multiple OS installation. Your OS depends directly from your UEFI Bios.&#xA;You can add and remove partitions easily with no risks (don't delete the wrong partition, that's all).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have more question, you can ask me (my english is poor, sorry for that).&lt;/p&gt;&#xA;" OwnerUserId="7285" LastActivityDate="2020-01-13T14:55:03.573" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22055" PostTypeId="1" AcceptedAnswerId="22158" CreationDate="2020-01-13T17:32:13.520" Score="0" ViewCount="51" Body="&lt;p&gt;I have a 5.0 install that has upgraded to 5.1. since the initial install, I've never had the password prompt come up for getting back into the machine after locking. I verified that I do have locking turned on, and my account requires a password to login. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When locking, the screen will go to a lockscreen (after a long wait), but when I return and move the mouse or hit the keyboard, I'm immediately returned to my running session...no password needed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While some would call this a feature, I kind need to be able to lock my screen. Any thoughts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Dave&lt;/p&gt;&#xA;" OwnerUserId="20243" LastActivityDate="2020-02-21T14:12:13.580" Title="No password prompt on lock acreen" Tags="|security|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22056" PostTypeId="2" ParentId="22035" CreationDate="2020-01-14T07:26:31.697" Score="0" Body="&lt;p&gt;I share your experience with CalDAV on Elementary, because even Elementary calendar does only show some of my CalDAV entries and not others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will file a bug report in the coming days and I would encourage you to do the same. You can do it &lt;a href=&quot;https://github.com/elementary/os/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19154" LastActivityDate="2020-01-14T07:26:31.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22058" PostTypeId="1" CreationDate="2020-01-14T10:49:32.560" Score="1" ViewCount="940" Body="&lt;p&gt;I'm trying to configure a elementary OS Hera client to connect to an existing VPN using IKEv2 EAP - but I can't get it working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Can anyone tell me what's wrong? (see UPDATE I below for further information on the cert and how I imported it on the client side and UPDATE II for a working Windows setup)&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's what I did:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open AppCenter and &lt;strong&gt;install &quot;strongSwan VPN client&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open &lt;strong&gt;&quot;System Settings &gt; Network &gt; VPN&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Add a new VPN connection&lt;/strong&gt; by tapping on &quot;+&quot;&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;strong&gt;&quot;IPSEC/IKEv2 (Strongswan)&quot;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Hit &quot;Create...&quot;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Enter the following information:&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Address:&lt;/strong&gt; my.domain.tld&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Certificate:&lt;/strong&gt; /path/to/my/certificate.pem&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Authentication: EAP&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Username&lt;/strong&gt;: my-username&lt;/li&gt;&#xA;&lt;li&gt;Hit &quot;Save&quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Open a Terminal and execute &lt;strong&gt;tail -f /var/log/syslog&lt;/strong&gt; - then &lt;strong&gt;Hit &quot;Connect&quot;&lt;/strong&gt; for the newly created VPN connection - enter the user password when prompted (FWIW: I double checked the users password, it's correct). The Terminal prints the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Jan 14 11:34:49 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:49 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:49 MyMachine nm-applet[2383]: Can't set a parent on widget which has a parent&#xA;Jan 14 11:34:51 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998091.8162] audit: op=&quot;connection-activate&quot; uuid=&quot;93ddc7bd-20e3-407e-8161-c1df393d30ab&quot; name=&quot;my.domain.tld&quot; pid=11945 uid=1001 result=&quot;success&quot;&#xA;Jan 14 11:34:51 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998091.8315] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: Saw the service appear; activating connection&#xA;Jan 14 11:34:51 MyMachine wingpanel[2354]: VpnMenuItem.vala:93: An VPN is being connected but not active.&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: Can't set a parent on widget which has a parent&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:51 MyMachine nm-applet[2383]: Can't set a parent on widget which has a parent&#xA;Jan 14 11:34:51 MyMachine nm-strongswan-a[12100]: GtkDialog mapped without a transient parent. This is discouraged.&#xA;Jan 14 11:34:55 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998095.1872] settings-connection[0x55c9a7ef5990,93ddc7bd-20e3-407e-8161-c1df393d30ab]: write: successfully updated (keyfile: update /etc/NetworkManager/system-connections/my.domain.tld (93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;)), connection was modified in the process&#xA;Jan 14 11:34:55 MyMachine wingpanel[2354]: VpnMenuItem.vala:93: An VPN is being connected but not active.&#xA;Jan 14 11:34:55 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998095.1950] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN connection: (ConnectInteractive) reply received&#xA;Jan 14 11:34:55 MyMachine charon-nm: 05[CFG] received initiate for NetworkManager connection my.domain.tld&#xA;Jan 14 11:34:55 MyMachine charon-nm: 05[CFG] using CA certificate, gateway identity 'my.domain.tld'&#xA;Jan 14 11:34:55 MyMachine charon-nm: 05[IKE] initiating IKE_SA my.domain.tld[12] to 123.231.132.123&#xA;Jan 14 11:34:55 MyMachine charon-nm: 05[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) ]&#xA;Jan 14 11:34:55 MyMachine charon-nm: 05[NET] sending packet: from 118.181.10.18[41265] to 123.231.132.123[500] (1116 bytes)&#xA;Jan 14 11:34:55 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998095.1973] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN plugin: state changed: starting (3)&#xA;Jan 14 11:34:55 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:55 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:55 MyMachine nm-applet[2383]: Can't set a parent on widget which has a parent&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[NET] received packet: from 123.231.132.123[500] to 118.181.10.18[41265] (38 bytes)&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[ENC] parsed IKE_SA_INIT response 0 [ N(INVAL_KE) ]&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[IKE] peer didn't accept DH group ECP_256, it requested MODP_2048&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[IKE] initiating IKE_SA my.domain.tld[12] to 123.231.132.123&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[ENC] generating IKE_SA_INIT request 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(FRAG_SUP) N(HASH_ALG) N(REDIR_SUP) ]&#xA;Jan 14 11:34:55 MyMachine charon-nm: 12[NET] sending packet: from 118.181.10.18[41265] to 123.231.132.123[500] (1308 bytes)&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[NET] received packet: from 123.231.132.123[500] to 118.181.10.18[41265] (681 bytes)&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[ENC] parsed IKE_SA_INIT response 0 [ SA KE No N(NATD_S_IP) N(NATD_D_IP) N(HTTP_CERT_LOOK) CERTREQ V V V ]&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[ENC] received unknown vendor ID: f7:58:f2:26:68:75:0f:03:b0:8d:f6:eb:e1:d0:04:03&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[ENC] received unknown vendor ID: f9:19:6d:f8:6b:81:2f:b0:f6:80:26:d8:87:6d:cb:7b:00:04:32:00&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[ENC] received unknown vendor ID: ac:40:f8:c4:38:99:27:c6:e8:ac:24:53:1b:b7:8b:2b:a1:ba:53:43:94:cc:20:8c:04:0d:fe:24:b7:99:7d:2b:73:61:0a:33:bd:6f:7b:4f:6f:1f:9c:06:45:24:83:ae:9b:a5:0b:ad:84:fd:f0:dd:3b:f4:19:c5:6c:54:cb:ba:d3:fa:8a:ad:9f:e8:40:a7:bd:4f:47:41:23:d7:22:e3:9e:16:b1:04:31:f9:ad:24:bf:60:ac:32:40:09:d5:41:58:4a:6b:a5:ce:1c:50:69:be:e8:92:49:56:37:48:d2:0e:f0:ef:89:df:2a:5f:49:1c:29:41:8a:b6:f2:e9:be&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[IKE] local host is behind NAT, sending keep alives&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[IKE] received cert request for &quot;CN=my.domain.tld, C=Country, ST=State, L=City, O=My Organization, OU=IT&quot;&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[IKE] received 2 cert requests for an unknown ca&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[IKE] sending cert request for &quot;CN=my.domain.tld, C=Country, ST=State, L=City, O=My Organization, OU=IT&quot;&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[IKE] establishing CHILD_SA my.domain.tld{12}&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[ENC] generating IKE_AUTH request 1 [ IDi N(INIT_CONTACT) CERTREQ SA TSi TSr N(MOBIKE_SUP) N(ADD_4_ADDR) N(ADD_4_ADDR) N(EAP_ONLY) N(MSG_ID_SYN_SUP) ]&#xA;Jan 14 11:34:56 MyMachine charon-nm: 08[NET] sending packet: from 118.181.10.18[54448] to 123.231.132.123[4500] (304 bytes)&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[NET] received packet: from 123.231.132.123[4500] to 118.181.10.18[54448] (1408 bytes)&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[ENC] parsed IKE_AUTH response 1 [ IDr CERT AUTH EAP/REQ/ID ]&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[IKE] received end entity cert &quot;CN=my.domain.tld, C=Country, ST=State, L=City, O=My Organization, OU=IT&quot;&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[CFG]   using trusted certificate &quot;CN=my.domain.tld, C=Country, ST=State, L=City, O=My Organization, OU=IT&quot;&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[IKE] authentication of 'my.domain.tld' with RSA signature successful&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[IKE] server requested EAP_IDENTITY (id 0x2A), sending 'my-username'&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[ENC] generating IKE_AUTH request 2 [ EAP/RES/ID ]&#xA;Jan 14 11:34:58 MyMachine charon-nm: 09[NET] sending packet: from 118.181.10.18[54448] to 123.231.132.123[4500] (80 bytes)&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[NET] received packet: from 123.231.132.123[4500] to 118.181.10.18[54448] (80 bytes)&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[ENC] parsed IKE_AUTH response 2 [ EAP/REQ/PEAP ]&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[IKE] server requested EAP_PEAP authentication (id 0x2B)&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[TLS] EAP_PEAP version is v0&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[ENC] generating IKE_AUTH request 3 [ EAP/RES/PEAP ]&#xA;Jan 14 11:34:58 MyMachine charon-nm: 15[NET] sending packet: from 118.181.10.18[54448] to 123.231.132.123[4500] (272 bytes)&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[NET] received packet: from 123.231.132.123[4500] to 118.181.10.18[54448] (1104 bytes)&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[ENC] parsed IKE_AUTH response 3 [ EAP/REQ/PEAP ]&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[TLS] negotiated TLS 1.0 using suite TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[TLS] server certificate does not match to 'my.domain.tld'&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[TLS] sending fatal TLS alert 'access denied'&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[ENC] generating IKE_AUTH request 4 [ EAP/RES/PEAP ]&#xA;Jan 14 11:34:59 MyMachine charon-nm: 11[NET] sending packet: from 118.181.10.18[54448] to 123.231.132.123[4500] (96 bytes)&#xA;Jan 14 11:34:59 MyMachine charon-nm: 10[NET] received packet: from 123.231.132.123[4500] to 118.181.10.18[54448] (80 bytes)&#xA;Jan 14 11:34:59 MyMachine charon-nm: 10[ENC] parsed IKE_AUTH response 4 [ EAP/FAIL ]&#xA;Jan 14 11:34:59 MyMachine charon-nm: 10[IKE] received EAP_FAILURE, EAP authentication failed&#xA;Jan 14 11:34:59 MyMachine charon-nm: 10[ENC] generating INFORMATIONAL request 5 [ N(AUTH_FAILED) ]&#xA;Jan 14 11:34:59 MyMachine charon-nm: 10[NET] sending packet: from 118.181.10.18[54448] to 123.231.132.123[4500] (80 bytes)&#xA;Jan 14 11:34:59 MyMachine NetworkManager[959]: &amp;lt;warn&amp;gt;  [1578998099.1459] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN plugin: failed: connect-failed (1)&#xA;Jan 14 11:34:59 MyMachine NetworkManager[959]: &amp;lt;warn&amp;gt;  [1578998099.1460] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN plugin: failed: connect-failed (1)&#xA;Jan 14 11:34:59 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998099.1463] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN plugin: state changed: stopping (5)&#xA;Jan 14 11:34:59 MyMachine NetworkManager[959]: &amp;lt;info&amp;gt;  [1578998099.1465] vpn-connection[0x55c9a8000870,93ddc7bd-20e3-407e-8161-c1df393d30ab,&quot;my.domain.tld&quot;,0]: VPN plugin: state changed: stopped (6)&#xA;Jan 14 11:34:59 MyMachine wingpanel[2354]: VpnMenuItem.vala:93: An VPN is being connected but not active.&#xA;Jan 14 11:34:59 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:59 MyMachine nm-applet[2383]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 14 11:34:59 MyMachine nm-applet[2383]: Can't set a parent on widget which has a parent&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;While in the router I can see the following log output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wqLaq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wqLaq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE I:&lt;/strong&gt; The following screenshot shows how the certifacte on the Zyxel USG is setup. All blackened parts are set to &lt;code&gt;my.domain.tld&lt;/code&gt;. As you can see there, it seems the &lt;code&gt;Subject Alternative Name&lt;/code&gt; of the certificate is set correctly (means: it is equal to the FQDN of the Zyxel device which serves the VPN connection and I'm trying to connect to):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rg2ZO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rg2ZO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I downloaded this cert and imported it on the client side with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp ~/Downloads/VPN_my.domain.tld.crt /usr/local/share/ca-certificates/&#xA;sudo update-ca-certificates&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then in Network Manager I selected the generated &lt;code&gt;/etc/ssl/certs/VPN_my.domain.tld.pem&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE II:&lt;/strong&gt; &lt;strong&gt;In Windows I'm able to connect&lt;/strong&gt; to the VPN with the following VPN-Adapter Settings (same certificate imported in machine-wide &quot;Trusted Root Certificate Authorities&quot;):&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Navigate to Control Center &gt; Network and Internet &gt; Network and Share Center&lt;/li&gt;&#xA;&lt;li&gt;Click Adapter Settings&lt;/li&gt;&#xA;&lt;li&gt;Right click on  &gt; Properties&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Security:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;VPN Type: IKEv2&lt;/li&gt;&#xA;&lt;li&gt;Encryption: Required&lt;/li&gt;&#xA;&lt;li&gt;Authentication: ✓ Use Extensible-Authentication-Protocol (EAP):&#xA;&lt;em&gt;Microsoft: Secured Password (EAP-MSCHAP v2)(Encryption enabled)&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5133" LastEditorUserId="5133" LastEditDate="2020-01-17T10:05:41.423" LastActivityDate="2024-01-26T19:06:55.853" Title="How to connect to IKEv2 VPN?" Tags="|vpn|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22059" PostTypeId="1" AcceptedAnswerId="22061" CreationDate="2020-01-14T11:18:33.367" Score="0" ViewCount="71" Body="&lt;p&gt;I would like to make my interface scaling 125%&#xA;Please let me know how to do this correctly, completely and permenantly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I saw a few posts on using xrandr, but I tried that and it did not work.&#xA;Likewise gconf editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just a little bit too small for me.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2020-01-14T12:34:17.053" Title="Scalling in 5.1 Hera" Tags="|release-hera|scaling|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22060" PostTypeId="1" CreationDate="2020-01-14T11:32:28.563" Score="1" ViewCount="28" Body="&lt;p&gt;One nice thing about Mac OSX is that when you log out and log back in, it will reopen all your windows for you so you can start over where you left off. Chrome will do this for you independently, but I particularly appreciate this capability when it comes to Apple's PDF viewer &quot;Preview.&quot; Is there any way to save and restore a set of open documents in Elementary's &quot;Document Viewer&quot; (aka &quot;Evince&quot;)?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2020-01-14T11:32:28.563" Title="how do I get document viewer to reopen windows" Tags="|pantheon|user-interface|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22061" PostTypeId="2" ParentId="22059" CreationDate="2020-01-14T12:20:02.333" Score="0" Body="&lt;p&gt;In the standard eOS settings panel go to &quot;Desktop&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to &quot;Appearance&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select &quot;Large&quot; for text size.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2020-01-14T12:34:17.053" LastActivityDate="2020-01-14T12:34:17.053" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22062" PostTypeId="1" CreationDate="2020-01-14T12:22:18.533" Score="0" ViewCount="104" Body="&lt;p&gt;I have a Dell laptop that is a few years old and I bought second hand. It was meant as a secondary computer but I am using it more and more these days and it's become my main workstation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, it's running Ubuntu Mate but it's running into some issues lately with unexplained errors popping up etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was thinking of just reinstalling Mate but came across Elementary. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, I have a 500GB SSD that is divided into partitions. The / and /home partitions are separated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I install Elementary on the / partition without touching the /home will Elementary just continue where I left off with Ubuntu Mate? Or are these so fundamentally different that it's better to start over completely?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am mainly worried about some Firefox bookmarks/saved login information and SSH keys for several machines that I want to keep.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Are there other things I need to add to this checklist before considering a migration?&lt;/p&gt;&#xA;" OwnerUserId="20251" LastEditorUserId="11882" LastEditDate="2020-04-30T14:23:44.627" LastActivityDate="2024-01-10T22:03:20.503" Title="Migrating Ubuntu Mate to Elementary" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22063" PostTypeId="2" ParentId="22058" CreationDate="2020-01-14T14:20:05.213" Score="0" Body="&lt;p&gt;According to the log, the server requests EAP-PEAP, however, the certificate it uses for that doesn't contain the hostname configured on the client (which it enforces):&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;Jan 14 11:34:59 MyMachine charon-nm: 11[TLS] server certificate does not match to 'my.domain.tld'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;With strongSwan's NM client you currently can't configure the AAA identity to a value different from the IKE identity, so this only works if the hostname is contained in that certificate as subjectAltName extension.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So either modify the certificate (or use a different one, that for IKE seems to include the hostname), disable EAP-PEAP (you could try to do so only on the client by disabling the plugin, but whether that works depends on the server configuration), or don't use the NM frontend and configure strongSwan via config file where the AAA identity can be set explicitly.&lt;/p&gt;&#xA;" OwnerUserId="20253" LastActivityDate="2020-01-14T14:20:05.213" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22064" PostTypeId="1" AcceptedAnswerId="22069" CreationDate="2020-01-14T18:47:12.330" Score="0" ViewCount="87" Body="&lt;p&gt;I did a fresh install of 5.1 and installed elementary tweaks to get my go-to windows controls layout. All the system apps and apps like Chrome and Firefox have the changed controls, but apps installed from flatpak like Spotify and other gtk? apps have the default eOS format.&#xA;How can I change these to the windows controls layout?&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/tiB6X.png&quot; alt=&quot;Screenshot&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="19372" LastEditorUserId="84" LastEditDate="2021-07-10T09:45:30.963" LastActivityDate="2021-07-10T09:45:30.963" Title="Windows controls layout not changed after configuring through Elementary Tweaks" Tags="|window-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22065" PostTypeId="1" AcceptedAnswerId="22068" CreationDate="2020-01-14T22:05:16.127" Score="1" ViewCount="82" Body="&lt;p&gt;I have uninstalled built-in music player (with orange icon on the pic below), but when playing music through another player it's icon and controls somehow appear back! This makes me feel uncomfortable, it spoils perfectness of OS. How could I remove this non-installed player controls?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ebEkj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ebEkj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20254" LastActivityDate="2020-01-15T09:51:48.707" Title="How to get rid of wrong player notification in sound popup?" Tags="|settings|notifications|audio-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22066" PostTypeId="2" ParentId="21743" CreationDate="2020-01-14T22:59:27.870" Score="1" Body="&lt;p&gt;It turned out that I found a self contained boot disk utility (maybe on the android x86 web site) that would just launch, then give you a menu option to boot the computer using the usb drive. That worked.  here is one such utility:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.howtogeek.com/howto/16822/boot-from-a-usb-drive-even-if-your-bios-wont-let-you/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/howto/16822/boot-from-a-usb-drive-even-if-your-bios-wont-let-you/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19950" LastActivityDate="2020-01-14T22:59:27.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22068" PostTypeId="2" ParentId="22065" CreationDate="2020-01-15T09:51:48.707" Score="0" Body="&lt;p&gt;These controls are not of the default Music player but the default audio controls of the elementary OS. They look like the controls of the already uninstalled player because the design of both is made the same. Every time you start audio from the browser for example these controls will appear. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not know how to remove them without problems for the os, but if the design of the icon is what botters you, you can change it using custom icon pack or just replace the icons with a name &lt;code&gt;multimedia-audio-player.svg&lt;/code&gt; into &lt;code&gt;/usr/share/icons/elementary/apps&lt;/code&gt; subfolders with a one that you choose. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-15T09:51:48.707" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22069" PostTypeId="2" ParentId="22064" CreationDate="2020-01-15T10:11:37.653" Score="0" Body="&lt;p&gt;looking at your screenshots you want the buttons to be on the right side with winboze order. In order to achieve this, execute this into the terminal application:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences button-layout ':minimize,maximize,close'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you want the buttons to be on the left site use &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.preferences button-layout 'close,minimize,maximize:'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-15T10:11:37.653" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22071" PostTypeId="1" CreationDate="2020-01-15T11:16:09.973" Score="0" ViewCount="540" Body="&lt;p&gt;I've just done a fresh install of 5.1 on my machine. I'm trying to setup openssh-server which was not installed on the base package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already done a 'sudo apt-get update' and 'sudo apt-get upgrade'.&#xA;But when i try and install openssh-server i seem to get a circular dependency problem. Does anyone know how to fix? See below for details:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&#xA;    ~$ lsb_release -a&#xA;    No LSB modules are available.&#xA;    Distributor ID: elementary&#xA;    Description:    elementary OS 5.1 Hera&#xA;    Release:    5.1&#xA;    Codename:   hera&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But when i try and install openssh-server I see this:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nherriot:~$ sudo apt-get install openssh-server&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; openssh-server : Depends: openssh-client (= 1:7.6p1-4)&#xA;                  Depends: openssh-sftp-server but it is not going to be installed&#xA;                  Recommends: ssh-import-id but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And if I check for ssh-import-id I see that it is already at the newest version:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nherriot:~$ sudo apt-get install ssh-import-id&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;ssh-import-id is already the newest version (5.7-0ubuntu1).&#xA;0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And if i check for openssh-client I have this already installed:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nherriot:~$ sudo apt-get install openssh-client&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;openssh-client is already the newest version (1:7.6p1-4ubuntu0.3).&#xA;0 to upgrade, 0 to newly install, 0 to remove and 0 not to upgrade.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This seems to be at the correct version number 1:7.6p1-4 as the version requested correct?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And if I check for the state of the package openssh-sftp-server I get this:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nherriot:~$ sudo apt-get install openssh-sftp-server&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; openssh-sftp-server : Depends: openssh-client (= 1:7.6p1-4)&#xA;                       Recommends: openssh-server or&#xA;                                   ssh-server&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Which seems to be circular! i.e. I already have openssh-client at the correct version, and I'm trying to install openssh-server!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you got any advice on how to solve this for elementary OS 5.1 ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Kind regards, Nicholas&lt;/p&gt;&#xA;" OwnerUserId="20257" LastActivityDate="2024-03-11T10:04:18.397" Title="openssh-server does not install using apt-get for Elementary OS 5.1 Hera" Tags="|release-hera|ssh|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22072" PostTypeId="1" AcceptedAnswerId="22073" CreationDate="2020-01-15T13:28:00.853" Score="0" ViewCount="433" Body="&lt;p&gt;scrolling through some themes I saw people have transparency on the top bar while I dont. is there anything I have to enable? tried all the default themes but none seems to have transparency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I’m using an i7 2600 integrated graphics, never installed any driver as it worked out of the box after installation&lt;/p&gt;&#xA;" OwnerUserId="19990" LastActivityDate="2020-01-15T14:55:45.013" Title="I have no transparency on top bar wingpanel" Tags="|wingpanel|graphics|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22073" PostTypeId="2" ParentId="22072" CreationDate="2020-01-15T14:55:45.013" Score="0" Body="&lt;p&gt;There is a setting for this - open System Settings &gt;  Desktop &gt; Appearence &gt; Panel Translucency. It must be enabled in order to have a transparent top bar. There is no information in your question, but if you are using some custom theme, some of them do not support translucency, also if you have a maximized window the top bar defaults to a black background color. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-15T14:55:45.013" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22074" PostTypeId="1" CreationDate="2020-01-15T17:14:46.640" Score="0" ViewCount="247" Body="&lt;p&gt;I've stumbled upon a problem where selecting shutdown or suspend from the power menu (little power icon in the top right corner) doesn't do the desired action.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shutdown, and Restart, simply does nothing. I have to run &quot;shutdown now&quot; from the terminal to power down my PC.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similarly, the Suspend option suspends the PC, but then immediately turns itself back on and shows the login screen. Running &quot;systemctl suspend&quot; returns no result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I first noticed this behaviour last night. Only change that was made was installing TexMaker and a couple of addons for it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best that I can make out from looking at journalctl is that something in the network is blocking the actions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the dump.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Jan 15 19:06:17 kaptein sudo[5650]:  erasmus : TTY=pts/1 ; PWD=/home/erasmus ; USER=root ; COMMAND=/bin/systemctl suspend&#xA;Jan 15 19:06:17 kaptein sudo[5650]: pam_unix(sudo:session): session opened for user root by (uid=0)&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.3845] manager: sleep: sleep requested (sleeping: no  enabled: yes)&#xA;Jan 15 19:06:17 kaptein sudo[5650]: pam_unix(sudo:session): session closed for user root&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.3846] manager: NetworkManager state is now ASLEEP&#xA;Jan 15 19:06:17 kaptein systemd-logind[5495]: Error during inhibitor-delayed operation (already returned success to client): Unit suspend.target i&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.3878] manager: sleep: wake requested (sleeping: yes  enabled: yes)&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.3878] device (enp3s0): state change: activated -&amp;gt; unmanaged (reason 'sleeping', s&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4199] dhcp4 (enp3s0): canceled DHCP transaction, DHCP client pid 5509&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4199] dhcp4 (enp3s0): state changed bound -&amp;gt; done&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Withdrawing address record for 192.168.11.78 on enp3s0.&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4206] manager: NetworkManager state is now CONNECTED_SITE&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Leaving mDNS multicast group on interface enp3s0.IPv4 with address 192.168.11.78.&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Interface enp3s0.IPv4 no longer relevant for mDNS.&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Withdrawing address record for fe80::530b:3a1d:d71a:4f51 on enp3s0.&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Leaving mDNS multicast group on interface enp3s0.IPv6 with address fe80::530b:3a1d:d71a:4f51.&#xA;Jan 15 19:06:17 kaptein avahi-daemon[778]: Interface enp3s0.IPv6 no longer relevant for mDNS.&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4212] manager: NetworkManager state is now CONNECTED_LOCAL&#xA;Jan 15 19:06:17 kaptein dbus-daemon[801]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop&#xA;Jan 15 19:06:17 kaptein kernel: r8169 0000:03:00.0 enp3s0: Link is Down&#xA;Jan 15 19:06:17 kaptein systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Jan 15 19:06:17 kaptein dbus-daemon[801]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Jan 15 19:06:17 kaptein nm-dispatcher[5660]: req:1 'connectivity-change': new request (2 scripts)&#xA;Jan 15 19:06:17 kaptein nm-dispatcher[5660]: req:1 'connectivity-change': start running ordered scripts...&#xA;Jan 15 19:06:17 kaptein systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4376] manager: NetworkManager state is now DISCONNECTED&#xA;Jan 15 19:06:17 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107977.4411] device (enp3s0): state change: unmanaged -&amp;gt; unavailable (reason 'managed', &#xA;Jan 15 19:06:17 kaptein kernel: RTL8211E Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-30&#xA;Jan 15 19:06:17 kaptein nm-dispatcher[5660]: req:2 'down' [enp3s0]: new request (2 scripts)&#xA;Jan 15 19:06:17 kaptein nm-dispatcher[5660]: req:2 'down' [enp3s0]: start running ordered scripts...&#xA;Jan 15 19:06:17 kaptein systemd[1]: systemd-logind.service: Main process exited, code=exited, status=1/FAILURE&#xA;Jan 15 19:06:17 kaptein systemd[1]: systemd-logind.service: Failed with result 'exit-code'.&#xA;Jan 15 19:06:17 kaptein pantheon-parent[808]: SessionManager.vala:92: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message recipient disconnect&#xA;Jan 15 19:06:17 kaptein systemd[1]: systemd-logind.service: Service has no hold-off time, scheduling restart.&#xA;Jan 15 19:06:17 kaptein systemd[1]: systemd-logind.service: Scheduled restart job, restart counter is at 6.&#xA;Jan 15 19:06:17 kaptein systemd[1]: Stopped Login Service.&#xA;Jan 15 19:06:17 kaptein upowerd[997]: Could not acquire inhibitor lock: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message recipient disconne&#xA;Jan 15 19:06:17 kaptein ModemManager[777]: &amp;lt;warn&amp;gt;  [sleep-monitor] inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message recipie&#xA;Jan 15 19:06:17 kaptein systemd[1]: Starting Login Service...&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: New seat seat0.&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event1 (Power Button)&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event0 (Power Button)&#xA;Jan 15 19:06:17 kaptein kernel: r8169 0000:03:00.0 enp3s0: Link is Down&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:17 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.&#xA;Jan 15 19:06:17 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit vino-server.service n&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:17 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event4 (SINO WEALTH USB KEYBOARD)&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event7 (SINO WEALTH USB KEYBOARD Keyboard)&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event5 (SINO WEALTH USB KEYBOARD System Control)&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: Watching system buttons on /dev/input/event6 (SINO WEALTH USB KEYBOARD Consumer Control)&#xA;Jan 15 19:06:17 kaptein systemd[1]: Started Login Service.&#xA;Jan 15 19:06:17 kaptein systemd-logind[5681]: New session c2 of user erasmus.&#xA;Jan 15 19:06:19 kaptein ModemManager[777]: &amp;lt;info&amp;gt;  Couldn't check support for device '/sys/devices/pci0000:00/0000:00:1c.4/0000:03:00.0': not supp&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2612] device (enp3s0): carrier: link connected&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2620] device (enp3s0): state change: unavailable -&amp;gt; disconnected (reason 'carrier&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2626] policy: auto-activating connection 'Wired connection 1'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2632] device (enp3s0): Activation: starting connection 'Wired connection 1' (6676&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2634] device (enp3s0): state change: disconnected -&amp;gt; prepare (reason 'none', sys-&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2635] manager: NetworkManager state is now CONNECTING&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2637] device (enp3s0): state change: prepare -&amp;gt; config (reason 'none', sys-iface-&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2640] device (enp3s0): state change: config -&amp;gt; ip-config (reason 'none', sys-ifac&#xA;Jan 15 19:06:20 kaptein kernel: r8169 0000:03:00.0 enp3s0: Link is Up - 100Mbps/Full - flow control rx/tx&#xA;Jan 15 19:06:20 kaptein kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2642] dhcp4 (enp3s0): activation: beginning transaction (timeout in 45 seconds)&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2688] dhcp4 (enp3s0): dhclient started with pid 5692&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Joining mDNS multicast group on interface enp3s0.IPv6 with address fe80::530b:3a1d:d71a:4f51.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: New relevant interface enp3s0.IPv6 for mDNS.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Registering new address record for fe80::530b:3a1d:d71a:4f51 on enp3s0.*.&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein dhclient[5692]: DHCPREQUEST of 192.168.11.78 on enp3s0 to 255.255.255.255 port 67 (xid=0x3476aaec)&#xA;Jan 15 19:06:20 kaptein dhclient[5692]: DHCPACK of 192.168.11.78 from 192.168.11.1&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2922] dhcp4 (enp3s0):   address 192.168.11.78&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   plen 24 (255.255.255.0)&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   gateway 192.168.11.1&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   lease time 86400&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '192.168.11.1'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '41.79.193.253'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0): state changed unknown -&amp;gt; bound&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Joining mDNS multicast group on interface enp3s0.IPv4 with address 192.168.11.78.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: New relevant interface enp3s0.IPv4 for mDNS.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Registering new address record for 192.168.11.78 on enp3s0.IPv4.&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2940] device (enp3s0): state change: ip-config -&amp;gt; ip-check (reason 'none', sys-if&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2945] device (enp3s0): state change: ip-check -&amp;gt; secondaries (reason 'none', sys-&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2946] device (enp3s0): state change: secondaries -&amp;gt; activated (reason 'none', sys&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2947] manager: NetworkManager state is now CONNECTED_LOCAL&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2976] manager: NetworkManager state is now CONNECTED_SITE&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2978] policy: set 'Wired connection 1' (enp3s0) as default for IPv4 routing and D&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2985] device (enp3s0): Activation: successful, device activated.&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: new request (2 scripts)&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: start running ordered scripts...&#xA;Jan 15 19:06:20 kaptein dhclient[5692]: bound to 192.168.11.78 -- renewal in 35272 seconds.&#xA;Jan 15 19:06:20 kaptein systemd-resolved[762]: Using degraded feature set (UDP) for DNS server 192.168.11.1.&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit vino-server.service n&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein CapNetAssist[5756]: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: &amp;lt;15&amp;gt;Jan 15 19:06:20 CapNetAssist: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:32 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107992.8778] manager: NetworkManager state is now CONNECTED_GLOBAL&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop&#xA;Jan 15 19:06:32 kaptein systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:32 kaptein systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': new request (2 scripts)&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': start running ordered scripts...&#xA;&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   plen 24 (255.255.255.0)&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   gateway 192.168.11.1&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   lease time 86400&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '192.168.11.1'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '41.79.193.253'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0): state changed unknown -&amp;gt; bound&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Joining mDNS multicast group on interface enp3s0.IPv4 with address 192.168.11.78.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: New relevant interface enp3s0.IPv4 for mDNS.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Registering new address record for 192.168.11.78 on enp3s0.IPv4.&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2940] device (enp3s0): state change: ip-config -&amp;gt; ip-check (reason 'none', sys-if&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2945] device (enp3s0): state change: ip-check -&amp;gt; secondaries (reason 'none', sys-&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2946] device (enp3s0): state change: secondaries -&amp;gt; activated (reason 'none', sys&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2947] manager: NetworkManager state is now CONNECTED_LOCAL&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2976] manager: NetworkManager state is now CONNECTED_SITE&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2978] policy: set 'Wired connection 1' (enp3s0) as default for IPv4 routing and D&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2985] device (enp3s0): Activation: successful, device activated.&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: new request (2 scripts)&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: start running ordered scripts...&#xA;Jan 15 19:06:20 kaptein dhclient[5692]: bound to 192.168.11.78 -- renewal in 35272 seconds.&#xA;Jan 15 19:06:20 kaptein systemd-resolved[762]: Using degraded feature set (UDP) for DNS server 192.168.11.1.&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit vino-server.service n&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein CapNetAssist[5756]: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: &amp;lt;15&amp;gt;Jan 15 19:06:20 CapNetAssist: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:32 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107992.8778] manager: NetworkManager state is now CONNECTED_GLOBAL&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop&#xA;Jan 15 19:06:32 kaptein systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:32 kaptein systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': new request (2 scripts)&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': start running ordered scripts...&#xA;&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   gateway 192.168.11.1&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   lease time 86400&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '192.168.11.1'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0):   nameserver '41.79.193.253'&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2923] dhcp4 (enp3s0): state changed unknown -&amp;gt; bound&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Joining mDNS multicast group on interface enp3s0.IPv4 with address 192.168.11.78.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: New relevant interface enp3s0.IPv4 for mDNS.&#xA;Jan 15 19:06:20 kaptein avahi-daemon[778]: Registering new address record for 192.168.11.78 on enp3s0.IPv4.&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2940] device (enp3s0): state change: ip-config -&amp;gt; ip-check (reason 'none', sys-if&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2945] device (enp3s0): state change: ip-check -&amp;gt; secondaries (reason 'none', sys-&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2946] device (enp3s0): state change: secondaries -&amp;gt; activated (reason 'none', sys&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2947] manager: NetworkManager state is now CONNECTED_LOCAL&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2976] manager: NetworkManager state is now CONNECTED_SITE&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2978] policy: set 'Wired connection 1' (enp3s0) as default for IPv4 routing and D&#xA;Jan 15 19:06:20 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107980.2985] device (enp3s0): Activation: successful, device activated.&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: new request (2 scripts)&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: req:3 'up' [enp3s0]: start running ordered scripts...&#xA;Jan 15 19:06:20 kaptein dhclient[5692]: bound to 192.168.11.78 -- renewal in 35272 seconds.&#xA;Jan 15 19:06:20 kaptein systemd-resolved[762]: Using degraded feature set (UDP) for DNS server 192.168.11.1.&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.&#xA;Jan 15 19:06:20 kaptein gsd-sharing[1393]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit vino-server.service n&#xA;Jan 15 19:06:20 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:20 kaptein CapNetAssist[5756]: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:20 kaptein nm-dispatcher[5660]: &amp;lt;15&amp;gt;Jan 15 19:06:20 CapNetAssist: DetectCaptivePortal script triggered&#xA;Jan 15 19:06:32 kaptein NetworkManager[806]: &amp;lt;info&amp;gt;  [1579107992.8778] manager: NetworkManager state is now CONNECTED_GLOBAL&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop&#xA;Jan 15 19:06:32 kaptein systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 15 19:06:32 kaptein dbus-daemon[801]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Jan 15 19:06:32 kaptein nm-applet[1532]: Can't set a parent on widget which has a parent&#xA;Jan 15 19:06:32 kaptein systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': new request (2 scripts)&#xA;Jan 15 19:06:32 kaptein nm-dispatcher[5783]: req:1 'connectivity-change': start running ordered scripts...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sorry for the wall of text.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="20261" LastActivityDate="2020-01-18T15:07:45.763" Title="eOS 5.1 shutdown/suspend not working" Tags="|suspend|release-hera|command-line|shutdown|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22075" PostTypeId="2" ParentId="22064" CreationDate="2020-01-15T20:34:32.193" Score="0" Body="&lt;p&gt;For those who prefer a graphical tool, &quot;gnome-tweak-tool&quot; (&quot;ajustements&quot; in French) works well to act on windows (enable &quot;minimize windows&quot;; choose left or right for the &quot;close&quot; or &quot;minimize&quot; buttons (in French, sorry) :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NrAsj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NrAsj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="20222" LastEditorUserId="20222" LastEditDate="2020-01-15T21:57:29.563" LastActivityDate="2020-01-15T21:57:29.563" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22080" PostTypeId="1" CreationDate="2020-01-16T09:55:53.367" Score="4" ViewCount="1348" Body="&lt;p&gt;I have a problem with elementary and I am wondering if anyone has experienced and solved the following issue.&#xA;My screen seems to freeze after doing some tasks, sometimes the mouse is frozen too and other times it is not and the audio in the background is still running. AS far as I can remember the freezing SOMETIMES happens when I do one of the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Transferring large files across storage devices.&lt;/li&gt;&#xA;&lt;li&gt;Use my computer after it has been sleeping.&lt;/li&gt;&#xA;&lt;li&gt;Deleting a bunch of files at once, say, 50 or more.&lt;/li&gt;&#xA;&lt;li&gt;Leave my computer for a little while then come back and start using it.&lt;/li&gt;&#xA;&lt;li&gt;(New) Changing system font.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I think my system is full up to date and I don't ever have many programs running at once on it.&#xA;Thank you in advance for any help you can offer :)&lt;/p&gt;&#xA;" OwnerUserId="20269" LastEditorUserId="20269" LastEditDate="2020-01-16T10:11:24.267" LastActivityDate="2020-06-10T18:31:30.890" Title="Elementary OS 5.1 Hera freezing" Tags="|release-hera|performance|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22082" PostTypeId="1" CreationDate="2020-01-16T13:56:11.000" Score="0" ViewCount="70" Body="&lt;p&gt;&lt;strong&gt;Folks, &#xA;before I start installing this new OS and stumble upon predictable questions, here is my setup and my previous problems.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My computer is a &lt;a href=&quot;https://support.lenovo.com/hr/en/solutions/pd015362&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lenovo Thinkpad W520&lt;/a&gt;, a powerhouse with an i7-2720, 32 GB RAM, two fairly big SSDs, fingerprint reader, USB3, eSata and a color calibration tool - you name it, this was built for photo and video editing. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The printers are a Samsung M288 printer/scanner and a Brother MFC 6490CW2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently I installed Ubuntu 18 LTS and ran into several problems - the machine did not boot properly, sound did not work and more, printer installation felt like a dentist appointment, Wifi was dead slow, Bluetooth did not work and a few more. I could fix some of that but it was no fun at all. So, I am ready to quit, and as a long-time Mac user without enough money for Apple gear I feel attracted by elementary...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;**As elementary OS is based on Ubuntu, too, do I have to expect the same problems?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did any of you ever successfully install this OS on a similar machine?&#xA;**&lt;/p&gt;&#xA;" OwnerUserId="20271" LastActivityDate="2024-02-27T03:09:46.227" Title="Newbee questions: I better ask all that before I install... will it work on my Notebook and with my printers?" Tags="|release-juno|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22083" PostTypeId="1" AcceptedAnswerId="22085" CreationDate="2020-01-16T15:38:13.487" Score="2" ViewCount="247" Body="&lt;p&gt;I am using elementary OS 5.1 Hera.&#xA;The shortcut &lt;code&gt;Super+T&lt;/code&gt; in previous versions (in elementary 5 and older) opened a &lt;strong&gt;new Terminal Window&lt;/strong&gt; . Now it opens &lt;strong&gt;a new Tab&lt;/strong&gt; in an existing Terminal Window (which in my case is most of the time on another workspace!) How can I change it back to open a new Terminal Window?&lt;/p&gt;&#xA;" OwnerUserId="19216" LastActivityDate="2020-10-20T03:38:39.640" Title="How to open a new Terminal Window instead of a new Tab" Tags="|keyboard-shortcuts|pantheon-terminal|release-hera|app-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22084" PostTypeId="2" ParentId="22083" CreationDate="2020-01-16T18:43:42.103" Score="0" Body="&lt;p&gt;This is a new change in behaviour introduced in a recent version of terminal, the -n flag is now needed to open a new window so the shortcut no longer opens a new window. You can revert to the previous behaviour by re-assigning super-t in settings to 'io.elementary.terminal -n'. &lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-16T18:43:42.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22085" PostTypeId="2" ParentId="22083" CreationDate="2020-01-16T18:44:09.590" Score="4" Body="&lt;p&gt;The solution I found for the same problem is to make a new Custom shortcut - &lt;strong&gt;System settings &gt; Keyboard &gt; Shortcuts &gt; Custom shortcut&lt;/strong&gt; , click on the little &lt;strong&gt;+&lt;/strong&gt; on the bottom left side of the right pannel, then add a custom command &lt;code&gt;io.elementary.terminal -n&lt;/code&gt; and in the right of it click/tap the &lt;strong&gt;Disabled&lt;/strong&gt; and then use &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;t&lt;/kbd&gt;. The system will inform you that you are about to change the default shortcut for the terminal command, you have to accept it and once you do this using the &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;t&lt;/kbd&gt; will open a new window instead of a new tab. If there is no terminal app opened and you have history into privacy &amp;amp; security enabled, the first time it will open all the tabs from your last session, and the next time will be a new window on the current space you are (before doing this it opens a new tab even if you are in another space then the terminal app is opened).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this works for you, please accept the answer (click/tap on the grey thickbox on the left side), if it doesn't - post a comment what is happening or not. It is necessary to have the latest terminal version installed, use &lt;code&gt;sudo apt update&lt;/code&gt; to check if you have updates for the terminal before you post a comment if this solution do not work for you.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-16T18:44:09.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22087" PostTypeId="1" AcceptedAnswerId="22088" CreationDate="2020-01-16T23:34:48.183" Score="1" ViewCount="59" Body="&lt;p&gt;As stated in title. I'd like to use a key combination or a macro key to open/close the sound icon in wingpanel, rather than clicking it each time. It seems like it should be trivial, but I can't find any examples of someone else doing it online.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="19442" LastActivityDate="2020-01-16T23:42:48.937" Title="How can I set a keyboard shortcut to expand a wingpanel icon (ie the sound/music one)?" Tags="|wingpanel|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22088" PostTypeId="2" ParentId="22087" CreationDate="2020-01-16T23:42:48.937" Score="3" Body="&lt;p&gt;You can create a custom shortcut in settings under keyboard. You can use 'wingpanel --open-indicator={indicator}' to open a specific indicator. For sound it would be 'wingpanel --open-indicator=sound'&lt;/p&gt;&#xA;" OwnerUserId="12608" LastActivityDate="2020-01-16T23:42:48.937" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22090" PostTypeId="1" AcceptedAnswerId="22148" CreationDate="2020-01-17T05:11:48.710" Score="2" ViewCount="341" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PMr6K.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PMr6K.jpg&quot; alt=&quot;corrupted panel and dock popover&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe its become like this after an update that i did on 16 jan. Didn't install any application or something that can cause for this. Anyone has the same problem? I restarted or shutdown few times. Didn't change anything. &#xA;If i click any of panel icons its corrects it self. You'll see below. Any thoughts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xohaV.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xohaV.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20181" LastEditorUserId="16827" LastEditDate="2020-01-18T22:02:35.560" LastActivityDate="2020-01-21T06:21:40.353" Title="Something wrong with my panel and dock popover" Tags="|wingpanel|plank|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22091" PostTypeId="2" ParentId="22090" CreationDate="2020-01-17T09:49:09.670" Score="2" Body="&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt; I might have an actual answer / workaround: booting with kernel 5.0 (instead of 5.3) makes these issues disappear.  During boot, select &quot;Advanced options for elementary&quot;, then &quot;elementary, with Linux 5.0.0-37-generic&quot; (instead of the default 5.3.0-26-generic option).  With this older kernel, the screen update issues do not occur for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Original post:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm seeing similar graphics errors across the system -- all sorts of display elements do not update until I mouse over them.  Affected programs include Emacs, Firefox and the desktop background picture right after login.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I am seeing this effect on other distributions as well, and have been using Elementary OS partly because it did not have that problem.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using an hp spectre folio (Intel i5-8200Y with onboard graphics).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I would post this as a comment but do not have enough reputation to do so; sorry)&lt;/p&gt;&#xA;" OwnerUserId="20277" LastEditorUserId="20277" LastEditDate="2020-01-17T10:58:16.653" LastActivityDate="2020-01-17T10:58:16.653" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22092" PostTypeId="1" AcceptedAnswerId="22093" CreationDate="2020-01-17T14:58:30.090" Score="0" ViewCount="139" Body="&lt;p&gt;I am running EOS 5.1&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsb_release -a&#xA;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.1 Hera&#xA;Release:    5.1&#xA;Codename:   hera&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I am currently experiencing a problem signing odt documents in LibreOffice.*&#xA;I have upgraded Libreoffice using a ppa, but this has not fixed my perceived issue. (6.0.7 --&gt; 6.3.4)&#xA;My next step in troubleshooting is to update libnss3.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;current version:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-cache show libnss3&#xA;Package: libnss3&#xA;Architecture: amd64&#xA;Version: 2:3.35-2ubuntu2.7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;according to &lt;a href=&quot;https://bugzilla.mozilla.org/buglist.cgi?resolution=FIXED&amp;amp;classification=Components&amp;amp;query_format=advanced&amp;amp;product=NSS&amp;amp;target_milestone=3.36&quot; rel=&quot;nofollow noreferrer&quot;&gt;bugzilla&lt;/a&gt;&#xA;There were several bug fixes in 3.36 alone.  The current stable version is 3.45(?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a suggestion on how I could update this package?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*I can sign new documents using my p12 cert stored in ~/.pki/nssdb and everything is fine.  the problem occurs when I must sign a document that was previously signed by someone else, my signature shows as &quot;invalid&quot;.&lt;/p&gt;&#xA;" OwnerUserId="19253" LastActivityDate="2020-01-17T16:12:07.450" Title="libnss3 package version update (document signing issue)" Tags="|firefox|libreoffice|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22093" PostTypeId="2" ParentId="22092" CreationDate="2020-01-17T16:12:07.450" Score="0" Body="&lt;p&gt;You can download the .deb package from &lt;a href=&quot;http://archive.ubuntu.com/ubuntu/pool/main/n/nss/libnss3_3.45-1ubuntu2_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;libnss3_3.45-1ubuntu2_amd64.deb&#xA;&lt;/a&gt;. After that, you can use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before installing the package:&lt;br&gt;&#xA;&lt;code&gt;libnss3 is already the newest version (2:3.35-2ubuntu2.7).&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After installing it:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;vlad@lenovo-y530:~$ apt list libnss3 -a&#xA;Listing... Done&#xA;libnss3/now 2:3.45-1ubuntu2 amd64 [installed,local]&#xA;libnss3/bionic-updates,bionic-security 2:3.35-2ubuntu2.7 amd64&#xA;libnss3/bionic 2:3.35-2ubuntu2 amd64&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Please let us know if this solves the signing issue.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-17T16:12:07.450" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22095" PostTypeId="2" ParentId="22062" CreationDate="2020-01-17T16:27:54.667" Score="0" Body="&lt;p&gt;Based on my experience doing the same with Ubuntu16.04 and Loki - If you keep the home partition it will be better to use the same username and password during installation - the password later can be changed safely but the username has to be kept. But doing like this probably some of the problems will be transfered into elementary OS also, because it is possible the reason you have them to be in your home folder. Also for sure some settings of Mate will not work for Elementary. In order to skip this, before you install the OS move all &lt;code&gt;~/.folders&lt;/code&gt; and &lt;code&gt;~/.files&lt;/code&gt; in some temporary location and after install and log in with the new but old user to put back the ones you need. Keep in mind that most of the applications put their settings into &lt;code&gt;~/.config&lt;/code&gt; folder, all ssh keys are into &lt;code&gt;~/.ssh&lt;/code&gt; folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another option is to create different username and copy the &lt;code&gt;~/.firefox&lt;/code&gt;,&lt;code&gt;~/.ssh&lt;/code&gt; and &lt;code&gt;~/.config/firefox&lt;/code&gt; folders to the new account from the old one. Keep in mind that every user has an UserID, by default the first user is 1000, the second 1001 etc and you will have access with the new user only to the folders with the same userID but it can be changed using &lt;code&gt;chown&lt;/code&gt; or &lt;code&gt;chmod&lt;/code&gt; commnads.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-17T16:27:54.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22097" PostTypeId="2" ParentId="22082" CreationDate="2020-01-17T18:45:32.580" Score="0" Body="&lt;p&gt;Since Elementary OS 5.1 is based on Ubuntu 18.04 LTS I would suspect you would have similar issues, if not exactly the same.&lt;br&gt;&#xA;There are other flavors of Ubuntu that you might want to consider trying that are on a newer code-base.&#xA;&lt;a href=&quot;https://ubuntu.com/download/flavours&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntu.com/download/flavours&lt;/a&gt;&#xA;You should be able to use 19.04 or 19.10 if so inclined.&#xA;Maybe check out &lt;a href=&quot;https://ubuntustudio.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&quot;Ubuntu Studio&quot;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="19253" LastActivityDate="2020-01-17T18:45:32.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22101" PostTypeId="1" CreationDate="2020-01-17T20:43:44.483" Score="1" ViewCount="40" Body="&lt;p&gt;I'm new on linux and I don't know too much of linux. &lt;em&gt;noobie&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My source list crash when i was installing the repository of spotify. I dont know how to explain myself. I hope one of you can help me with this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;a href=&quot;https://i.stack.imgur.com/moV3h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/moV3h.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20282" LastEditorUserId="9445" LastEditDate="2020-01-17T21:54:29.147" LastActivityDate="2020-01-17T21:54:29.147" Title="The source list couldn't not be read" Tags="|updates|appcenter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22102" PostTypeId="1" CreationDate="2020-01-17T21:15:29.700" Score="1" ViewCount="63" Body="&lt;p&gt;I have desperately been trying to find away to remove the window decoration of a specific window for a borderless windowed effect. There are lots of answers and systems out there for doing it but I have had no luck getting them to work in ElementaryOS, is this possible?&lt;/p&gt;&#xA;" OwnerUserId="20283" LastActivityDate="2020-01-17T21:15:29.700" Title="Borderless Windowed in Elementary" Tags="|window-management|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22105" PostTypeId="1" CreationDate="2020-01-17T23:34:44.603" Score="1" ViewCount="96" Body="&lt;p&gt;using the latest version Hera 5.1 of eOS, when I shutdown my computer the screen stay at the logo forever.&#xA;I tried &quot;sudo shutdown now&quot; but nothing change.&#xA;Also tried Esc but it show nothing. (Nothing change it stay at the logo)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I always have to shutdown manually by pressing the power button.&#xA;Thanks by advance for the help!&lt;/p&gt;&#xA;" OwnerUserId="20285" LastEditorUserId="-1" LastEditDate="2020-01-18T21:58:11.777" LastActivityDate="2020-01-18T21:58:11.777" Title="Stuck at elementaryOS logo after shutdown" Tags="|shutdown|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22106" PostTypeId="1" CreationDate="2020-01-18T01:24:58.130" Score="1" ViewCount="23" Body="&lt;p&gt;Was trying out the Recipes app by Bart Zaalberg. When I installed it i had one unmet dependency: &lt;code&gt;json-glib-1.0&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way I managed to fix that issue was by installing  &lt;code&gt;elementary-sdk&lt;/code&gt; through &lt;code&gt;sudo apt install elementary-sdk&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is resulted in my laptop  not recognizing sound output devices and the AppCenter being removed from my computer. There may be other issues, but I haven't found them yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: My sound works with a few applications (flash on web, vlc) but not others (youtube, spotify)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I resolve this?&lt;/p&gt;&#xA;" OwnerUserId="20286" LastEditorUserId="20286" LastEditDate="2020-01-18T01:35:28.533" LastActivityDate="2020-01-18T01:35:28.533" Title="Audio stopped working and App center got removed" Tags="|appcenter|sound|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22109" PostTypeId="2" ParentId="11266" CreationDate="2020-01-18T07:34:30.230" Score="0" Body="&lt;p&gt;I have found a better solution for it.&lt;/p&gt;&#xA;&lt;h1&gt;For newer versions&lt;/h1&gt;&#xA;&lt;p&gt;Check if the secure boot is disabled.&lt;/p&gt;&#xA;&lt;p&gt;Then check the kernel version is 5.0.x&lt;/p&gt;&#xA;&lt;p&gt;then do install git.&lt;/p&gt;&#xA;&lt;p&gt;After that&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall git dkms build-essential linux-headers-$(uname -r)&#xA;git clone https://github.com/tomaspinho/rtl8821ce&#xA;cd rtl8821ce&#xA;chmod +x dkms-install.sh&#xA;chmod +x dkms-remove.sh&#xA;sudo ./dkms-install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now the touchpad issue...&#xA;just go to &lt;strong&gt;settings&lt;/strong&gt; &amp;gt; &lt;strong&gt;mouse and touchpad&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;then change the option of &lt;strong&gt;physical clicking&lt;/strong&gt; from &lt;strong&gt;multi-touch&lt;/strong&gt; to &lt;strong&gt;touchpad areas&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;h1&gt;It is for the older versions of elementary os.&lt;/h1&gt;&#xA;&lt;p&gt;I have a Lenovo Ideapad 330 15ARR with Ryzen 3 processor. I tried to install ubuntu using legacy mode and UEFI mode, but both were showing only a blank screen.&lt;/p&gt;&#xA;&lt;p&gt;After 10 days of trying different methods, I found out a way to install it.&lt;/p&gt;&#xA;&lt;p&gt;The actual problem why it was not working is that the ubuntu installation file comes with a kernel that doesn't support the display/video graphics of this laptop.&lt;/p&gt;&#xA;&lt;p&gt;So to overcome this, you have to add a parameter to the ‘install Ubuntu’ option in the grub menu.&lt;/p&gt;&#xA;&lt;p&gt;You can press ‘e’ when the ‘install Ubuntu’ option is highlighted to enter the command section.&lt;/p&gt;&#xA;&lt;p&gt;You can find a line starting with ‘Linux’ and ‘quiet splash’ somewhere at the end.&lt;/p&gt;&#xA;&lt;p&gt;Edit that line and add ‘nomodeset’ before ‘quiet splash’.&lt;/p&gt;&#xA;&lt;p&gt;Then go back and install ubuntu.&lt;/p&gt;&#xA;&lt;p&gt;If the grub menu doesn't show up at booting, go to BIOS (by pressing F12 at boot) and in boot option, select ‘Ubuntu’.&lt;/p&gt;&#xA;&lt;p&gt;When the grub menu appears, you have to add the ‘nomodeset’ parameter again for ubuntu to load. You won't be able to adjust brightness.&lt;/p&gt;&#xA;&lt;p&gt;After booting, update ubuntu - including kernels.&lt;/p&gt;&#xA;&lt;p&gt;U can use ukuu to update the kernel.&lt;/p&gt;&#xA;&lt;p&gt;After that, you won't have to add nomodeset parameter each time at booting.&lt;/p&gt;&#xA;&lt;p&gt;The latest kernel has a problem with wifi and trackpad, so it is better to install a 4.17.xx version of the kernel using ukuu.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="20041" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-01-20T09:16:39.130" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22111" PostTypeId="1" CreationDate="2020-01-18T09:43:45.987" Score="1" ViewCount="35" Body="&lt;p&gt;i installed elementary OS 5.1 on a acer aspire I3 machine with an ATI Readon mobility HD 5450 graphic chip. Now i have screen disturtions while mouse over like show in the append picture. Any ideas? Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1OXTx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1OXTx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20290" LastEditorUserId="9445" LastEditDate="2020-01-18T11:41:21.017" LastActivityDate="2020-01-18T11:41:21.017" Title="How to fix screen disturtion while mouse over actions?" Tags="|display|mouse|graphics|" AnswerCount="0" CommentCount="1" ClosedDate="2020-01-20T16:18:36.043" ContentLicense="CC BY-SA 4.0" />
  <row Id="22114" PostTypeId="1" CreationDate="2020-01-18T12:00:24.890" Score="1" ViewCount="54" Body="&lt;p&gt;Recently the UI on my system started to render a bit weirdly. As can be seen in screenshots below, the title bar has a weird drop shadow on it (although subtle) and window border shadows became very extreme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Furthermore, small transition animations such as when scrolling through the apps in the 'Applications' menu disappeared. The transition is now instant.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any idea on how to fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lnLKT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lnLKT.png&quot; alt=&quot;Drop shadow and title bar&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20292" LastActivityDate="2020-01-18T12:00:24.890" Title="Issues with UI rendering (Weird border/title bar shadows)" Tags="|user-interface|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22116" PostTypeId="1" CreationDate="2020-01-18T13:45:43.380" Score="0" ViewCount="63" Body="&lt;p&gt;i installed gnome games via sideload and it obviously is installed because i could start it once but cannot find it now in my system.&#xA;On the other hand I'd like to know, how to deinstall it, wen i cant' find it in the AppCenter &quot;installed&quot; list. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&#xA;Jo&lt;/p&gt;&#xA;" OwnerUserId="20240" LastActivityDate="2024-01-27T20:05:35.607" Title="Where can i find my flathub installation (5.1 hera)" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22117" PostTypeId="2" ParentId="22116" CreationDate="2020-01-18T13:52:30.360" Score="0" Body="&lt;p&gt;ok, seems that a simple restart solved the issue. Unfortunately Gnome Games doesn't support Amiga emulation, yet so i have to be patient and use something else instead.  &lt;/p&gt;&#xA;" OwnerUserId="20240" LastActivityDate="2020-01-18T13:52:30.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22120" PostTypeId="1" CreationDate="2020-01-18T14:39:27.617" Score="0" ViewCount="76" Body="&lt;p&gt;I got rid of Windows, so I need to install &lt;a href=&quot;https://appdb.winehq.org/objectManager.php?sClass=version&amp;amp;iId=23880&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dragon NaturallySpeaking 11.5&lt;/a&gt; using Wine. On Wine AppDB, it has silver status, but still I wasn't able to install it. The tutorials I found say “choose manual installation” but that button just doesn't exist (or at least isn't shown) in my case. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot of how the installation menu is looking:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xbY9y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xbY9y.png&quot; alt=&quot;installation menu&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried every wine version available in the AppCenter (playonlinux first!) but I couldn't get to the manual installation process. It would be so great to get this working. Can you help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&#xA;Jo&lt;/p&gt;&#xA;" OwnerUserId="20240" LastEditorUserId="19079" LastEditDate="2020-01-19T19:54:53.797" LastActivityDate="2020-01-19T19:54:53.797" Title="Can't install Dragon NaturallySpeaking with Wine on Hera" Tags="|release-hera|wine|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22123" PostTypeId="1" CreationDate="2020-01-18T18:05:50.050" Score="1" ViewCount="89" Body="&lt;p&gt;Every time I open System Settings it won't let me maximize the window and part of it strangely hidden below (!) the screen, so I can't reach some of the settings (like the &quot;Apply&quot; button). Clicking on &quot;Maximize&quot; button or using keyboard shortcuts doesn't work. I can't even change height of the window. Need help!&#xA;&lt;a href=&quot;https://i.stack.imgur.com/CItye.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CItye.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20296" LastEditorUserId="20296" LastEditDate="2020-01-18T18:58:15.410" LastActivityDate="2020-02-10T12:45:57.167" Title="Why can't I maximize Settings window?" Tags="|settings|release-hera|window-management|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22125" PostTypeId="1" CreationDate="2020-01-18T23:06:10.140" Score="0" ViewCount="36" Body="&lt;p&gt;&lt;a href=&quot;https://youtu.be/X5bLgpwpzu8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/X5bLgpwpzu8&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is some kind of divider in the upper window that prevents the window from: &#xA;1) Dragging it up or down between through the middle of the screens.&#xA;2) Dragging it from left to right and back on the upper display&#xA;3) Maximizing the window on the upper display&lt;/p&gt;&#xA;" OwnerUserId="20298" LastActivityDate="2020-01-27T17:08:34.833" Title="Multiple vertical displays problem" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22128" PostTypeId="1" AcceptedAnswerId="22149" CreationDate="2020-01-19T13:08:33.473" Score="0" ViewCount="311" Body="&lt;p&gt;I'm having an issue with elementary OS. Note that I'm totally new to any kind of Linux OS :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The tooltips on my dock look scrambled:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2VShV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2VShV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to correct this? Googling didn't help me, probably because I don't know what to search for..&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: only some tooltips look like this, while others are fine&lt;/p&gt;&#xA;" OwnerUserId="20306" LastEditorUserId="16827" LastEditDate="2020-01-31T09:47:21.400" LastActivityDate="2020-01-31T09:47:21.400" Title="elementary OS 5.1 Hera tooltips messed up" Tags="|plank|release-hera|user-interface|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22131" PostTypeId="2" ParentId="22123" CreationDate="2020-01-19T16:38:13.657" Score="2" Body="&lt;p&gt;Removing &quot;elementary-tweaks&quot; package helped. &lt;/p&gt;&#xA;" OwnerUserId="20296" LastActivityDate="2020-01-19T16:38:13.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22134" PostTypeId="1" CreationDate="2020-01-19T19:01:07.587" Score="0" ViewCount="103" Body="&lt;p&gt;When I connect any camera to my Elementary OS (I've tried two from different vendors), the camera mounts as read-only (can't delete files, create folders, rename, ...) and none of the images has a preview.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;While I can browse the images in Photos, they take ages to load – it's definitely slower than copying them to my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The address in Files is &lt;code&gt;gphoto2://[usb:001,026]&lt;/code&gt;, dragging any file to the terminal shows &lt;code&gt;/run/user/1000/gvfs/gphoto2:host=%5Busb%3A001%2C026%5D/&lt;/code&gt;. That means my camera connects in &lt;a href=&quot;https://en.wikipedia.org/wiki/Picture_Transfer_Protocol&quot; rel=&quot;nofollow noreferrer&quot;&gt;PTP&lt;/a&gt; mode (&lt;a href=&quot;https://en.wikipedia.org/wiki/GVfs#Technical_details&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BtSQa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BtSQa.png&quot; alt=&quot;screenshot of Files showing a readonly picture without preview&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to fix this and make my camera automatically mount as read-write and with image previews?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I tried using &lt;a href=&quot;http://gphoto.org/doc/manual/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;gphoto2&lt;/code&gt;&lt;/a&gt; terminal utility to access the camera. I could list the file structure with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gphoto2 --auto-detect --list-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I could even take a photo with &lt;code&gt;--capture-image&lt;/code&gt;. But trying to create a folder resulted in a segmentation fault:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;➜  ~ gphoto2 --auto-detect --mkdir=/store_001 &#xA;Model                          Port                                            &#xA;----------------------------------------------------------&#xA;Nikon DSC D3100 (PTP mode)     usb:001,027     &#xA;[1]    13953 segmentation fault  gphoto2 --auto-detect --mkdir=/store_001&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I haven't tried setting up USB permissions, &lt;a href=&quot;http://gphoto.org/doc/manual/permissions-usb.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;as the manual says&lt;/a&gt;, yet. The steps are quite complicated and I didn't know which ones apply to me when I'm using &lt;code&gt;gphoto2&lt;/code&gt; as a terminal command.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 2:&lt;/strong&gt; I tried on two computers (both on elementary 5.1) with tree devices each. Nikon D3100 and Xiaomi Redmi Note 3 had the same problems on both computers – the device was readonly and had no thumbnails. With Xiaomi Redmi Note 7 in PTP mode, everything works all right – I could delete/create files and folders, I could turn on thumbnails.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2020-01-24T22:20:08.277" LastActivityDate="2020-01-24T22:20:08.277" Title="Camera mounts as read-only and doesn't show previews in Hera" Tags="|pantheon-files|mount|photos|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="22135" PostTypeId="1" CreationDate="2020-01-19T19:47:27.020" Score="1" ViewCount="117" Body="&lt;p&gt;I have a Epson perfection v370, it isn't detected by xsane but in the terminal it does appear. Searching around I got to open xsane as root and then I got it working but it leaves it as a file that I don't have permission to use normally. &#xA;What bothers me is why I can't use or detect a scanner as administrator and as root I do.&#xA;If someone knows how to solve this? It's really breaking my head.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Yes I use ElementaryOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings&lt;/p&gt;&#xA;" OwnerUserId="20315" LastActivityDate="2024-02-01T15:08:31.060" Title="Can't detect or use Scanner Epson perfection v3790 in Elementary OS" Tags="|drivers|hardware|printer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22136" PostTypeId="2" ParentId="1437" CreationDate="2020-01-19T21:27:29.667" Score="1" Body="&lt;p&gt;There is an unofficial build of Elementary OS for the Raspberry Pi 4 here: &lt;a href=&quot;https://github.com/meisenzahl/elementary-os-unofficial/tree/master/hera/arm64/raspi4&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/meisenzahl/elementary-os-unofficial/tree/master/hera/arm64/raspi4&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20318" LastActivityDate="2020-01-19T21:27:29.667" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22138" PostTypeId="1" CreationDate="2020-01-20T02:32:10.443" Score="0" ViewCount="60" Body="&lt;p&gt;When I want to open an app the file chooser window pops up and as I navigate into a wrong folder and want to go back one step I click on the path-bar but it always takes me back to my home folder no matter where I click. Even if I try to edit the path by pressing ctrl+L and typing the location it still takes me back to my home folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas on what's going on or how to fix it? Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="20321" LastActivityDate="2024-01-30T18:01:30.190" Title="File chooser path-bar bug" Tags="|pantheon-files|navigation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22139" PostTypeId="1" AcceptedAnswerId="22199" CreationDate="2020-01-20T09:55:16.007" Score="0" ViewCount="81" Body="&lt;p&gt;I need to create two .desktop files for launching, from the dock or menu, two application that are currently launched from the terminal with ./app-file  and ./app-file.sh commands. I have already created   with success the two .desktop files in an Ubuntu installation simply inserting the application path in the &quot;Exec&quot; key but this method doesn't work in Elementary OS. I tried to use &quot;AppEditor&quot; utility to create the menu entries but inserting the application path in the Exec field but the utility does not recognize the app-file as an executable. How can i solve these problems?&lt;/p&gt;&#xA;" OwnerUserId="20324" LastEditorUserId="20324" LastEditDate="2020-01-21T17:35:31.990" LastActivityDate="2020-01-24T16:36:30.920" Title="Problem with menu entries .desktop files in Elementary OS 5.1" Tags="|slingshot|launcher|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22140" PostTypeId="1" CreationDate="2020-01-20T14:41:32.623" Score="1" ViewCount="482" Body="&lt;p&gt;I have a laptop with 2 hard drives 1 is an m.2 SSD 250gb and a 1 TB hard drive I would like to know how to configure this system so that my SSD has the os but the 1tb hard drive handles storage thanks for your time&lt;/p&gt;&#xA;" OwnerUserId="20326" LastActivityDate="2020-01-24T03:28:45.157" Title="clean install on system with 2 hard drives" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22141" PostTypeId="1" CreationDate="2020-01-20T14:49:08.043" Score="0" ViewCount="52" Body="&lt;p&gt;I'm new to the OS and to Linux in general and I would like to know why is my laptop running eOS so slow (even slower than it ran Windows)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specs: AMD A10-8700P, 8GB DDR3, 5400RPM 1Tb HHD and Radeon R6 integrated graphics. I know it's not the best setup but I think it deserves better than what I'm getting. I disabled animations with Tweaks. Everything is slow (start, login, opening Chrome, File explorer, Discord, Spotify, etc...) Only Terminal seems to be opening instantaneously. Even closing the laptop and reopening it (waking it up) takes a whole 40 seconds or so...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every comment is much obliged!&lt;/p&gt;&#xA;" OwnerUserId="20327" LastActivityDate="2020-01-20T14:49:08.043" Title="Why is my eOS running slow on my laptop?" Tags="|laptop|amd|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22142" PostTypeId="1" CreationDate="2020-01-20T18:05:10.333" Score="1" ViewCount="113" Body="&lt;p&gt;I'm having troubles with Elementary OS, because it freezes several times a day. The whole system is suspending, cursor and everything doesn't work, but the music still still plays. Re-installing and update kernel doesn't help.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;OS:&lt;/strong&gt; Elementary OS 5.1 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Kernel:&lt;/strong&gt; 5.3.0-26-generic #28~18.04.1-Ubuntu&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Huawei Matebook D14&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ryzen 5 2500U&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Vega 8&lt;/p&gt;&#xA;&#xA;&lt;p&gt;8 GB DDR4&lt;/p&gt;&#xA;&#xA;&lt;p&gt;256 GB SSD&lt;/p&gt;&#xA;" OwnerUserId="20330" LastEditorUserId="15904" LastEditDate="2020-01-29T12:22:43.903" LastActivityDate="2020-01-29T12:22:43.903" Title="Elementary freezes from time to time" Tags="|release-hera|crash|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22143" PostTypeId="1" CreationDate="2020-01-20T19:38:49.553" Score="3" ViewCount="95" Body="&lt;p&gt;&quot;org.gnome.Platform Flatpak runtime&quot; has been showing for the last few days in app centre as an system update but everytime I try to update the app centre crashes.&#xA;Re-opening the app centre and no results can be found for installed apps.&#xA;Installed apps only appear after system shutdown and restart and &quot;org.gnome.Platform Flatpak runtime&quot; is back there as a system update.&#xA;Ignored it expecting &quot;a fix&quot; to appear but none so far and now there are other updates that appear to be not updating I assume due to the failure of &quot;org.gnome.Platform Flatpak runtime&quot; &quot;crashing&quot; app centre.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;anyone got any similar experience /solutions??? &lt;/p&gt;&#xA;" OwnerUserId="20332" LastActivityDate="2020-01-28T06:24:16.180" Title="&quot;org.gnome.Platform Flatpak runtime&quot; update fails to install" Tags="|updates|" AnswerCount="0" CommentCount="2" FavoriteCount="0" ClosedDate="2020-01-31T09:15:57.947" ContentLicense="CC BY-SA 4.0" />
  <row Id="22144" PostTypeId="1" CreationDate="2020-01-20T20:47:17.773" Score="0" ViewCount="246" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/r8ZoR.jpg&quot; alt=&quot;error&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see from the picture, I get this error, I've tried changing boot type to either ufi or legacy and get the same error. I have a desktop with Windows 10 on I can boot from the boot USB no problem on that don't get any errors? &lt;/p&gt;&#xA;" OwnerUserId="20334" LastActivityDate="2020-01-21T06:00:11.243" Title="I'm trying to install elementary os but when trying to boot from the live usb which works on my Windows desktop I get this error, please someone help?" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22145" PostTypeId="1" AcceptedAnswerId="22164" CreationDate="2020-01-20T21:15:06.827" Score="1" ViewCount="68" Body="&lt;p&gt;How do I get the control button to work in the terminal? control-shift-c does not copy, control-q does not kill processes, and without use of the control key I am finding it impossible to use nano or vim. I am used to coding with the MacOS terminal command line. Please help!&lt;/p&gt;&#xA;" OwnerUserId="20335" LastActivityDate="2020-01-22T12:40:21.570" Title="How do I get the control button to work in the terminal?" Tags="|keyboard-shortcuts|pantheon-terminal|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22147" PostTypeId="1" AcceptedAnswerId="22150" CreationDate="2020-01-20T22:04:53.047" Score="0" ViewCount="93" Body="&lt;p&gt;This error I received after opened AppCenter. &#xA;What could this be and how to fix? Or at least, how can I get additional details about the reason?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5.1 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VNdxf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VNdxf.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20254" LastActivityDate="2020-01-21T00:28:33.917" Title="AppCenter - authentication failed?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22148" PostTypeId="2" ParentId="22090" CreationDate="2020-01-20T23:17:39.893" Score="5" Body="&lt;p&gt;There seems to be a problem with the last update of &lt;code&gt;xserver-xorg-core-hwe-18.04&lt;/code&gt; or &lt;code&gt;xserver-xorg-legacy-hwe-18.04&lt;/code&gt; with Radeon graphics cards, which break the rendering of boxes and tooltips.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They just uploaded a fix in &lt;a href=&quot;https://launchpad.net/ubuntu/+source/xserver-xorg-video-ati-hwe-18.04/1:19.0.1-1ubuntu1~18.04.1/+build/18591330&quot; rel=&quot;nofollow noreferrer&quot;&gt;launchpad&lt;/a&gt;. Just update the packages to their newer versions&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xserver-xorg-video-amdgpu-hwe-18.04:amd64 from 19.0.1-1~18.04.1 to &#xA;19.0.1-1ubuntu1~18.04.1&#xA;and&#xA;xserver-xorg-video-ati-hwe-18.04:amd64 from 1:19.0.1-0ubuntu1~18.04.1 to &#xA;1:19.0.1-1ubuntu1~18.04.1&#xA;and&#xA;xserver-xorg-video-radeon-hwe-18.04:amd64 from 1:19.0.1-0ubuntu1~18.04.1 to &#xA;1:19.0.1-1ubuntu1~18.04.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or download the &lt;code&gt;.deb&lt;/code&gt; files and install them with Eddy or &lt;code&gt;dpkg&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Take note, this are proposed packages and are still in testing. It worked for me, but it might not work for everyone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;More about the bug &lt;a href=&quot;https://bugs.launchpad.net/fedora/+source/xserver-xorg-video-ati/+bug/1841718&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20276" LastEditorUserId="20276" LastEditDate="2020-01-21T06:21:40.353" LastActivityDate="2020-01-21T06:21:40.353" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22149" PostTypeId="2" ParentId="22128" CreationDate="2020-01-20T23:24:40.807" Score="2" Body="&lt;p&gt;There's a problem with the &lt;code&gt;xserver-xorg-core-hwe-18.04&lt;/code&gt; update of Jan 16 and radeon graphics cards.&#xA;There are newer versions of the package to download. More explained version of this answer in this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/22090/something-wrong-with-my-panel-and-dock-popover&quot;&gt;post&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or download the newer packages in &lt;a href=&quot;https://launchpad.net/ubuntu/+source/xserver-xorg-video-ati-hwe-18.04/1:19.0.1-1ubuntu1~18.04.1/+build/18591330&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20276" LastActivityDate="2020-01-20T23:24:40.807" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22150" PostTypeId="2" ParentId="22147" CreationDate="2020-01-21T00:28:33.917" Score="1" Body="&lt;p&gt;I had the same issue today; I opened up Terminal and entered &lt;code&gt;sudo apt update&lt;/code&gt; and then &lt;code&gt;sudo apt upgrade&lt;/code&gt;. After that, I rebooted and the issue is gone. &lt;/p&gt;&#xA;" OwnerUserId="20339" LastActivityDate="2020-01-21T00:28:33.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22151" PostTypeId="1" CreationDate="2020-01-21T02:50:33.250" Score="0" ViewCount="112" Body="&lt;p&gt;My os is Ele OS 5.1 Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have disabled screensaver from system settings and it is working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But when OS wakesup from suspend or reboot, It comes to login screen waiting for my password. After few minutes (5 or 15 minutes;I do not know), OS goes to suspend.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is it possible to disable screensaver from the login screen and if yes how?&lt;/p&gt;&#xA;" OwnerUserId="19906" LastActivityDate="2020-01-26T01:13:02.127" Title="disable screensaver from login screen" Tags="|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22152" PostTypeId="1" CreationDate="2020-01-21T04:09:21.850" Score="0" ViewCount="86" Body="&lt;p&gt;i am not a technical user.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this evening, i had to crop a photo to a custom/ specific size, so in the drop down menu (right click while on the photo) i found the custom size option, input my specs and was able to crop my photo.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but now, all my photos are cropped to that specific size and i am unable to create a drop down menu to edit the custom/ spec size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how do i get it to go back to the default settings? so i can individually crop each photo? lesson learnt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thank you&lt;/p&gt;&#xA;" OwnerUserId="20340" LastEditorUserId="15904" LastEditDate="2020-02-04T11:02:28.980" LastActivityDate="2020-07-03T12:03:55.367" Title="How to reset to default the Photo editor that is pre-installed in elemtary os?" Tags="|release-loki|applications|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22154" PostTypeId="2" ParentId="22152" CreationDate="2020-01-21T05:53:54.463" Score="1" Body="&lt;p&gt;Right Click to a picture that you desire to associate, Open With. Then select &quot;Other Application&quot; (even if you see the default photo viewer there!).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now select &quot;Photo Viewer&quot; and check the &quot;Set as default&quot; box below as you can see on this image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xdOxx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xdOxx.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-21T05:53:54.463" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22155" PostTypeId="2" ParentId="22144" CreationDate="2020-01-21T06:00:11.243" Score="1" Body="&lt;p&gt;Even if it works on the desktop, I would check the MD5 checksum from the elementary.io site after downloading the ISO and then re-create the USB (Balena Etcher should do the trick if you're creating from Windows or Linux).&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-21T06:00:11.243" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22156" PostTypeId="2" ParentId="22145" CreationDate="2020-01-21T06:08:36.743" Score="0" Body="&lt;p&gt;Right click on the terminal window, you should see the shortcut and commands. &#xA;Can you re-try after validating that you're using the correct keys?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, can you screenshot what you see in that window when you right-click? &#xA;thanks!&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-21T06:08:36.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22157" PostTypeId="2" ParentId="22138" CreationDate="2020-01-21T09:27:55.203" Score="0" Body="&lt;p&gt;There is already a bug report about this at &lt;a href=&quot;https://github.com/elementary/files/issues/1165&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1165&lt;/a&gt;.  Hopefully it will be fixed by the next release.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-01-21T09:27:55.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22158" PostTypeId="2" ParentId="22055" CreationDate="2020-01-21T14:38:27.320" Score="1" Body="&lt;p&gt;Disable locking, reboot your system and then enable it again and log out. I had a similar problem a long time ago and resolve it like this&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="20457" LastEditDate="2020-02-21T14:12:13.580" LastActivityDate="2020-02-21T14:12:13.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22159" PostTypeId="1" CreationDate="2020-01-21T16:40:07.010" Score="1" ViewCount="221" Body="&lt;p&gt;Some time ago, I used the Gogh to change the color themes of the Terminal. But now I want to reset or restore the default color theme, but don't know how to do that?&lt;/p&gt;&#xA;" OwnerUserId="20346" LastActivityDate="2020-01-22T23:28:03.600" Title="How to restore the color theme of terminal in Elementary OS?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22160" PostTypeId="2" ParentId="22159" CreationDate="2020-01-21T20:03:39.787" Score="1" Body="&lt;p&gt;Are you able to click in the &quot;gear&quot; icon located in the top-right portion of the window and change it from there?&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-21T20:03:39.787" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22164" PostTypeId="2" ParentId="22145" CreationDate="2020-01-22T04:53:22.427" Score="2" Body="&lt;p&gt;I figured it out!&#xA;I think the key mappings were thinking that my keyboard was a full-size iMac keyboard instead of the Macbook Pro keyboard. I followed the first part of this tutorial and it fixed the problem! &lt;a href=&quot;https://medium.com/@petrstepanov/a-macos-like-keyboard-remap-on-ubuntu-linux-cae1d108a97&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@petrstepanov/a-macos-like-keyboard-remap-on-ubuntu-linux-cae1d108a97&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I switched the xkb mapping for command and control. This worked like a charm and I am so relieved. The actual physical control key on my keyboard still isn't working, so I think that particular piece of hardware might be broken, but now that the left command key has been mapped to control's functionality, I can do everything I need to within the terminal.&lt;/p&gt;&#xA;" OwnerUserId="20335" LastActivityDate="2020-01-22T04:53:22.427" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22167" PostTypeId="2" ParentId="22145" CreationDate="2020-01-22T12:40:21.570" Score="0" Body="&lt;p&gt;There's a Preferences pull-down menu in the upper-right corner (shaped like a gear), which has an entry &quot;Natural Copy/Paste&quot;.  Switching this off will switch copy/paste from Ctrl-C to Ctrl-Shift-C etc.&lt;/p&gt;&#xA;" OwnerUserId="20277" LastActivityDate="2020-01-22T12:40:21.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22170" PostTypeId="1" AcceptedAnswerId="22171" CreationDate="2020-01-22T16:10:25.357" Score="1" ViewCount="162" Body="&lt;p&gt;I would like to use spell check extension in Code but have not find any place, how to add/remove languages (dictionaries).&#xA;Can you help me, where is the config for this extension, and/or where to upload dict. files?&lt;/p&gt;&#xA;" OwnerUserId="9263" LastActivityDate="2020-01-22T17:44:19.940" Title="Code - Spell check extension - where to add/remove dictionaries?" Tags="|code|language|extensions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22171" PostTypeId="2" ParentId="22170" CreationDate="2020-01-22T17:44:19.940" Score="3" Body="&lt;p&gt;I'll try to help with this one:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, obviously, enable the extension in Code's Preferences.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MDTRi.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MDTRi.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, right-clicking inside a document will let you choose from one of the pre-existing languages:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mTR01.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mTR01.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If, like me, you might need a language that is not in the list, you can easely add it if you have the available dictonary files. The extension 'looks' for available languages inside &lt;code&gt;/usr/share/hunspell/&lt;/code&gt;. Inside this folder, every language is represented by two files: .dic &amp;amp; .tiff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One way to add new languages is by simply running a &lt;code&gt;sudo apt install language&lt;/code&gt; command. For example, running &lt;code&gt;sudo apt install hunspell-ro&lt;/code&gt; will add a new &lt;code&gt;ro_RO&lt;/code&gt;entry to the 'Languages' menu in Code, and enable spell-checking for the Romanian language. I used &lt;a href=&quot;https://www.archlinux.org/packages/?q=hunspell-&quot; rel=&quot;nofollow noreferrer&quot;&gt;this ArchWiki&lt;/a&gt; for a list of available extra language packs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another way is to simply copy the .dic &amp;amp; .tiff files (if you have them already from other sources) to &lt;code&gt;/usr/share/hunspell/&lt;/code&gt;. There are numerous repositories online where you could get maybe updated? dictionaries. The &lt;a href=&quot;https://github.com/LibreOffice/dictionaries&quot; rel=&quot;nofollow noreferrer&quot;&gt;LibreOffice dictionaries GitHub repo&lt;/a&gt; seems to contain some extra languages...&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-22T17:44:19.940" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22172" PostTypeId="1" CreationDate="2020-01-22T23:02:08.957" Score="1" ViewCount="18" Body="&lt;p&gt;I've been struggling with finding a working wildcard search in the Code application. Is there a character I'm missing? I'd like to be able to highlight multiple numbered items, replacing the number with a wildcard search, but I'm not sure the function exists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I'm being blind, that's fine, if someone gives me the answer first I'll be happy to see this closed.&lt;/p&gt;&#xA;" OwnerUserId="20369" LastActivityDate="2024-01-21T15:06:15.683" Title="Wildcard searches in Code" Tags="|code|search|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22173" PostTypeId="2" ParentId="22159" CreationDate="2020-01-22T23:28:03.600" Score="0" Body="&lt;p&gt;Also, you can check &lt;a href=&quot;https://gist.github.com/davidgomes/5162998&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link&lt;/a&gt;. It has extra info about it but check my other comment as well. :)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-22T23:28:03.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22176" PostTypeId="1" CreationDate="2020-01-23T07:22:33.820" Score="2" ViewCount="160" Body="&lt;p&gt;How can I enable different keyboard layout for different applications (different windows)? &#xA;I'm use elementary OS 5.1 Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Каким образом можно настроить чтобы переключение раскладки клавиатуры действовало не на все открытые (открываемые после) приложения (окна)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Спасибо!&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="20370" LastEditorUserId="16827" LastEditDate="2020-01-31T09:46:50.533" LastActivityDate="2024-02-09T19:05:30.643" Title="Keyboard layout switch in different windows" Tags="|keyboard|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22177" PostTypeId="1" AcceptedAnswerId="22178" CreationDate="2020-01-23T12:51:39.237" Score="0" ViewCount="120" Body="&lt;p&gt;I don't see vlc or inkscape in the app store.  They are installable with synaptic.  Is this a bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that many things are not there.  These apps are standard. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought the USA repository was athe problem so I switched to  Using main Ubuntu repo.  The problem is still there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eos 5.1&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8319" LastEditDate="2020-01-23T12:57:52.423" LastActivityDate="2020-01-23T13:14:04.380" Title="I don't see vlc in app store" Tags="|appcenter|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22178" PostTypeId="2" ParentId="22177" CreationDate="2020-01-23T12:59:02.870" Score="1" Body="&lt;p&gt;the appCenter has a search input on the topper right corner. Type inside &lt;code&gt;vlc&lt;/code&gt; or &lt;code&gt;inkscape&lt;/code&gt; and you will find both of them.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VmFtP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VmFtP.png&quot; alt=&quot;vlc&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/dsFK1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dsFK1.png&quot; alt=&quot;inkscape&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-01-23T13:14:04.380" LastActivityDate="2020-01-23T13:14:04.380" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22179" PostTypeId="1" CreationDate="2020-01-23T16:53:55.453" Score="0" ViewCount="3309" Body="&lt;p&gt;I rebooted and found that not only did I not have a wifi connection, but the System Settings Network panel had lost its Hotspot and WiFi tabs (only VPN &amp;amp; Proxy)! When I checked the AppCenter Installed tab, I found at the very top of the list was a backport-iwlwifi-dkms package that I don't recall ever installing. Upon removing it and rebooting, things were back to normal, although the AppCenter Installed tab continues to show a Drivers section with the backport-iwlwifi-dkms package ready to be installed (which I obviously don't want to do!).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anybody know what is going on? And how can I get this horrible driver out of my Installed list?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2022-11-17T15:08:00.883" Title="backport-iwlwifi-dkms broke my wifi" Tags="|wifi|system|appcenter|drivers|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22180" PostTypeId="2" ParentId="21433" CreationDate="2020-01-23T19:24:30.420" Score="1" Body="&lt;p&gt;had exactly the same problem. The above-mentioned didn't help.&#xA;For me I had to install the synaptic driver from the terminal. Even I didn't need the driver before, I need it now..&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt-get install xserver-xorg-input-synaptics xserver-xorg-input-synaptics-dev-hwe-16.04 xserver-xorg-core&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Before xinput didn't show the device. After installig the driver xinput shows it&#xA;SYNA3602:00 0911:5288 Touchpad&lt;/p&gt;&#xA;" OwnerUserId="20381" LastActivityDate="2020-01-23T19:24:30.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22181" PostTypeId="2" ParentId="15915" CreationDate="2020-01-23T21:00:34.683" Score="0" Body="&lt;p&gt;There is a utility available called Desktop folder which can enable desktop in Elementary OS . You can install it via AppCentre with a click and use it. &#xA;It provides a lot of other features and is really hand. The fact that it's no third party and is available via AppCentre convinced me it's not going to break something. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;You can access files, folders and applications from your desktop.&lt;/li&gt;&#xA;&lt;li&gt;Activates the right click on desktop. &lt;/li&gt;&#xA;&lt;li&gt;Supports drag and drop for files, apps, links inside panel to quickly use next time. &lt;/li&gt;&#xA;&lt;li&gt;You can also resize the panel, reposition it on the screen and change background colours. &lt;/li&gt;&#xA;&lt;li&gt;You can keep notes on the desktop and display photos. &lt;/li&gt;&#xA;&lt;li&gt;It also revives the desktop by enabling Super Key + D to display Desktop at any point of time.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Source : &lt;a href=&quot;https://thelinuxuser.com/enable-desktop-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Enable desktop in Elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20384" LastActivityDate="2020-01-23T21:00:34.683" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22182" PostTypeId="2" ParentId="22176" CreationDate="2020-01-23T23:44:05.207" Score="0" Body="&lt;p&gt;As of 2020/01/24, this is not possible. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an open issue in the &lt;code&gt;elementary/gala&lt;/code&gt; repository you can follow for improvements.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See &lt;a href=&quot;https://github.com/elementary/gala/issues/180&quot; rel=&quot;nofollow noreferrer&quot;&gt;github.com/elementary/gala/issues/180&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19056" LastActivityDate="2020-01-23T23:44:05.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22183" PostTypeId="1" CreationDate="2020-01-24T02:20:03.740" Score="0" ViewCount="217" Body="&lt;p&gt;After installing nvidia 390 drivers I rebooted to find my screen locked to a 1280x1024 resolution, with no option to change it. What should I do?&lt;/p&gt;&#xA;" OwnerUserId="20157" LastActivityDate="2024-02-02T12:05:05.570" Title="Resolution changes after nvidia proprietary drivers installed" Tags="|display|release-hera|nvidia|resolution|proprietary|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22184" PostTypeId="2" ParentId="22140" CreationDate="2020-01-24T03:17:08.370" Score="1" Body="&lt;p&gt;In order to setup your PC in the way you described before, you can do a Manual Partition when you are installing ElementaryOS. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I don't know the level of experience you (or the person reading this question) have, I'm going to do a very detailed tutorial so it is clear enough almost for everyone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend you to firstly check &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;this&lt;/a&gt;, basically there's explained how you can manually partition your disk to install a GNU/Linux distribution, in this case Ubuntu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When you are installing ElemOS, there is a step which is called &quot;Installation Type&quot;. It should look like this: &lt;a href=&quot;https://i.stack.imgur.com/Ngrir.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ngrir.png&quot; alt=&quot;Installation type, ElemOS&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select the &lt;strong&gt;Something else&lt;/strong&gt; option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The installer will take you to a partition table. There you can see all your Storage Devices. There's also a tab below where they are listed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, the trick is on the &lt;code&gt;/home&lt;/code&gt; partition. There is where all your Documents, Photos, etc... are saved. On your HDD create a new partition with the size you prefer, mount it as &lt;code&gt;/home&lt;/code&gt; and use it as &lt;code&gt;ext4&lt;/code&gt;. (Check &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;this&lt;/a&gt; again if you have any questions).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On your SSD you can create the &lt;code&gt;swap area&lt;/code&gt;, &lt;code&gt;/&lt;/code&gt; (root) and &lt;code&gt;/boot&lt;/code&gt;partitions. If you are not sure how large should each partition be, go back &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;here&lt;/a&gt; again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Be careful&lt;/strong&gt;, since the previous post is a little bit old, it does not have info about UEFI. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Further information about UEFI can be found &lt;a href=&quot;https://help.ubuntu.com/community/UEFI&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. The really important thing is knowing if your PC works with UEFI or Legacy. If you are not sure you can google it. (Example: Lenovo Ideapad ### UEFI or Legacy?) Usually you can setup it on the BIOS, but that goes off topic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have Legacy, you can create the &lt;code&gt;/boot&lt;/code&gt; partition as it is shown &lt;a href=&quot;https://askubuntu.com/questions/343268/how-to-use-manual-partitioning-during-installation&quot;&gt;here&lt;/a&gt; and it's done. Now you have your SSD for the OS and the HDD for storage!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have UEFI, don't create the &lt;code&gt;/boot&lt;/code&gt; partition since your PC won't recognize it. Instead create an &lt;code&gt;EFI system partition&lt;/code&gt;. 200MB sould be more than enough. (I recommend 100MB).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EaLOl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EaLOl.png&quot; alt=&quot;EFI Partition System&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And &lt;em&gt;voila&lt;/em&gt;, you have finished!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please let me know if you have any other question or if something wasn't clear enough.&lt;/p&gt;&#xA;" OwnerUserId="20124" LastEditorUserId="20124" LastEditDate="2020-01-24T03:28:45.157" LastActivityDate="2020-01-24T03:28:45.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22185" PostTypeId="2" ParentId="22183" CreationDate="2020-01-24T04:16:54.770" Score="0" Body="&lt;p&gt;Which nvidia card do you have? Don't you have the options to change the resolution in 'Nvidia Settings'? If you choose third party software for graphics and Wi-Fi hardware when you install eOS 5.1 therer's no need to install the driver manually and it will install the correct driver.You may have installed the wrong driver.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How did you install the nvidia driver?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/it7ho.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/it7ho.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-01-24T04:16:54.770" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22186" PostTypeId="1" CreationDate="2020-01-24T05:21:53.190" Score="0" ViewCount="533" Body="&lt;p&gt;Hi apart from sound network etc (standard) wingpanel is refusing to show apps icons like dropbox, shutter, copyq&lt;/p&gt;&#xA;" OwnerUserId="1127" LastActivityDate="2020-03-16T21:51:20.803" Title="Elementary OS 5 wingpanel does not show standard icons" Tags="|release-juno|wingpanel|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22187" PostTypeId="1" CreationDate="2020-01-24T06:11:11.783" Score="2" ViewCount="2057" Body="&lt;p&gt;Hi guys here is Question and answer: how to install latest stable Wine 5 for elementary OS 5.1 Hera?&lt;/p&gt;&#xA;" OwnerUserId="20389" LastEditorUserId="26" LastEditDate="2020-07-25T15:20:31.500" LastActivityDate="2024-04-06T08:04:15.523" Title="How to install Wine 5 on elementary OS 5.1 Hera?" Tags="|release-hera|wine|install|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="22191" PostTypeId="2" ParentId="18947" CreationDate="2020-01-24T09:42:27.303" Score="1" Body="&lt;p&gt;I believe this is a bug related to cerbere. It’s discussed in more depth in &lt;a href=&quot;https://github.com/elementary/cerbere/issues/36&quot; rel=&quot;nofollow noreferrer&quot;&gt;github&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only workarounds that seems to work are:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Set &lt;code&gt;DefaultTimeoutStopSec&lt;/code&gt; to 10 or lower,    or&lt;/li&gt;&#xA;&lt;li&gt;Kill cerbere before shutdown&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="20276" LastEditorUserId="20276" LastEditDate="2020-01-24T09:47:52.257" LastActivityDate="2020-01-24T09:47:52.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22192" PostTypeId="2" ParentId="22186" CreationDate="2020-01-24T10:14:40.943" Score="1" Body="&lt;p&gt;Systemtray as we know it are not supported anymore in eOS (nor in Gnome Shell). But I was reading some months ago, that some made a hack for it with more or less success. You may search Stackexchange to find it.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-01-24T10:14:40.943" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22193" PostTypeId="1" CreationDate="2020-01-24T11:08:58.287" Score="0" ViewCount="160" Body="&lt;p&gt;So I'm running an Asus X5501CA on eOS 5.1 Hera (Built on Ubuntu 18.04.3 LTS | Linux 5.3.0-26-generic | Linux 5.3.0-26-generic).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have Qualcomm bluetooth hardware card. So anyway up until a few days ago my laptop was connecting just fine with my SONY SRS XB10. But as of yesterday, I can't connect to my bluetooth speaker. I tried using blueman bluetooth manager, nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't know what the issue is. The speaker connects well with Windows 10 (same laptop), and my Android phone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help.&lt;/p&gt;&#xA;" OwnerUserId="20393" LastEditorUserId="15904" LastEditDate="2020-01-31T09:12:23.390" LastActivityDate="2020-01-31T09:12:23.390" Title="Can't connect to Bluetooth speakers" Tags="|release-hera|bluetooth|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22195" PostTypeId="2" ParentId="22186" CreationDate="2020-01-24T12:01:07.457" Score="3" Body="&lt;p&gt;You need to manually install &lt;code&gt;wingpanel-indicator-ayatana&lt;/code&gt; in order to show again third part icons. There are some tutorials on internet showing how to do that. Note this is not a recommended action from Elementary developers, so you are on your own&lt;/p&gt;&#xA;" OwnerUserId="20395" LastActivityDate="2020-01-24T12:01:07.457" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22197" PostTypeId="1" CreationDate="2020-01-24T15:50:36.050" Score="0" ViewCount="52" Body="&lt;p&gt;I’m installing latest elementary OS 5.1 from USB on Linux x230 mSata. I pulled windows drive out so it’s the mSata is the only drove in. I loaded up and it’s stuck on “a start job is running for Hold until boot process finishes up (27 min / no limit) &lt;img src=&quot;https://i.stack.imgur.com/eu8Q0.jpg&quot; alt=&quot;installation&quot;&gt;!&lt;/p&gt;&#xA;" OwnerUserId="20400" LastEditorUserId="15904" LastEditDate="2020-01-31T09:29:10.027" LastActivityDate="2020-01-31T09:29:10.027" Title="Elementary is 5.1 installation" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22198" PostTypeId="2" ParentId="22197" CreationDate="2020-01-24T16:18:42.590" Score="1" Body="&lt;p&gt;Fixed issue by using BalenaEtcher to create elementary OS live USB drive instead of Rufus (both windows version) and used a different flash drive&lt;/p&gt;&#xA;" OwnerUserId="20400" LastActivityDate="2020-01-24T16:18:42.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22199" PostTypeId="2" ParentId="22139" CreationDate="2020-01-24T16:36:30.920" Score="0" Body="&lt;p&gt;Running the ls -alh command, as suggested in the &quot;endorama&quot; comment, allowed me to understand that app-file and app-file.sh did not have execute permission.&#xA;So I changed the permissions by adding the &quot;execute&quot; permission on each file:&#xA;right-click-&gt; Properties (context menù)-&gt; &quot;Permissions&quot; (pop-up windows) -&gt; &quot;Execute&quot;.&lt;/p&gt;&#xA;" OwnerUserId="20324" LastActivityDate="2020-01-24T16:36:30.920" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22200" PostTypeId="1" CreationDate="2020-01-24T17:27:04.853" Score="1" ViewCount="54" Body="&lt;p&gt;How to allow &lt;em&gt;AppCenter&lt;/em&gt; to auto-update all the apps as it happens in &lt;em&gt;Android&lt;/em&gt;'s &lt;em&gt;Play Store&lt;/em&gt; or in &lt;em&gt;Microsoft Windows&lt;/em&gt;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is a little annoying to give permission every time to update the apps. And if one does not update the apps, the red dot on the &lt;em&gt;AppCenter&lt;/em&gt;'s icon would not go away.&lt;/p&gt;&#xA;" OwnerUserId="20018" LastActivityDate="2020-01-24T17:27:04.853" Title="How to allow AppCenter to auto-update apps as in Android's Play Store?" Tags="|updates|appcenter|permissions|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22201" PostTypeId="1" CreationDate="2020-01-24T21:45:50.627" Score="1" ViewCount="101" Body="&lt;p&gt;The title is very straight forward, I started using eOS since last 2 years as far as I remember, started with linux with this distro also so, I´m a little noob.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I frequently use eOS and windows, so I decided to make my laptop dual-boot to use the Adobe program library, game a little bit and for some educational purposes and I use linux when I need to program or just use the laptop for my daily basis.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I new that eOS got an update few weeks ago but I didn´t use eOS those weeks, until today that I wanted to update but I can´t. tried via GUI (System Settings by checking updates) and via terminal with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But none of those worked for me, when entering the App Center it shows me a Fetch Update error and cant update anything, also when using the update command and the upgrade throws some errors, upgrade shows this text:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20404" LastActivityDate="2020-02-26T20:00:30.543" Title="Can't update eOS from Juno to Hera" Tags="|updates|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22202" PostTypeId="1" CreationDate="2020-01-24T23:39:33.373" Score="0" ViewCount="145" Body="&lt;p&gt;today I installed elementary OS (Hera) on my physical hard drive after weeks of tinkering around in a virtual machine:)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately I ran into a problem after setting up everything:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Every time I click on the volume button in the top right corner the system freezes. I can see and move the mouse but I can't click on anything.&#xA;Luckily it is possible to &quot;win + T&quot; or &quot;ctrl + alt + F1&quot; into a terminal and killing the &quot;wingpanel&quot; process (googled it) solves the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is no problem with anything else and I usually change the volume via a knob on my keyboard but I wonder if there is a patch around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I googled at least an hour and didn't find this exact scenario. I would provide a report if neccessary but I have no idea how^^. I could't find any log file either.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(Sorry for the double post)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;best regards &lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found out that &quot;killall spotify&quot; (its a snap package) solved the problem. Just to reproduce I started spotify again but clicking the volume button didnt freeze the system again. &#xA;Maybe the system as just overloaded with all those snaps because I installed and ran everything without really &quot;closing&quot; the programs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry that long post :)&lt;/p&gt;&#xA;" OwnerUserId="20405" LastEditorUserId="20405" LastEditDate="2020-01-24T23:50:59.807" LastActivityDate="2024-02-04T02:07:55.957" Title="wingpanel freeze when volume-control button is clicked" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22204" PostTypeId="1" CreationDate="2020-01-25T01:32:05.283" Score="1" ViewCount="333" Body="&lt;p&gt;I have installed the pcloud appimage which runs fine once I click on the pcloud icon in the Applications menu. But unlike dropbox it does not run on startup automatically - even adding it in the list of startup programs via &quot;system settings&quot; menu for elementary OS does not help. How do we make it run in the background just like the dropbox app and also integrate in the &quot;file manager&quot; like dropbox? Is this possible?   &lt;/p&gt;&#xA;" OwnerUserId="14523" LastActivityDate="2024-02-03T23:07:15.893" Title="PCloud on the startup" Tags="|startup|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22205" PostTypeId="1" AcceptedAnswerId="22210" CreationDate="2020-01-25T02:45:12.870" Score="2" ViewCount="285" Body="&lt;p&gt;Ive moved from Ubuntu to ElementaryOS and the only drawback I've had is with my NFS shares. I usually setup my NFS shares via FSTAB however I receive an error after trying to open the share. However in Ubuntu I dont get this error and my shares work perfectly. Any help would be greatly appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q3mkZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q3mkZ.png&quot; alt=&quot;NFS Error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my FSTAB also&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zEvDi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zEvDi.png&quot; alt=&quot;FSTAB&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19731" LastActivityDate="2020-01-25T11:58:36.713" Title="Adding NFS shares to FSTAB" Tags="|system|networking|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22206" PostTypeId="2" ParentId="22202" CreationDate="2020-01-25T05:39:03.850" Score="0" Body="&lt;p&gt;Since the problem happens when Spotify(snap) is running, try installing Spotify with the following instructions:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstall Spotify from snap with &lt;code&gt;sudo snap remove spotify&lt;/code&gt; or in the snap store.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install curl: &lt;code&gt;sudo apt install curl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run: &lt;code&gt;curl -sS https://download.spotify.com/debian/pubkey.gpg | sudo apt-key add -&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then run: &lt;code&gt;echo &quot;deb http://repository.spotify.com stable non-free&quot; | sudo tee /etc/apt/sources.list.d/spotify.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Finally: &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install spotify-client&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot and try using Spotify again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This info was taken from the official &lt;a href=&quot;https://www.spotify.com/co/download/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Spotify Webpage for Linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20124" LastEditorUserId="20124" LastEditDate="2020-01-25T15:41:07.230" LastActivityDate="2020-01-25T15:41:07.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22207" PostTypeId="2" ParentId="22204" CreationDate="2020-01-25T05:47:43.613" Score="0" Body="&lt;p&gt;Which command did you give? Have you tried to give it full path to the bin file?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/bin/psyncgui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-01-25T05:47:43.613" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22208" PostTypeId="2" ParentId="22204" CreationDate="2020-01-25T07:46:28.960" Score="0" Body="&lt;p&gt;Running PCloud for a few years now and never had this issue. Clicking &quot;Start pCloud Drive on system startup&quot; on the Settings tab should create a &lt;code&gt;pcloud.desktop&lt;/code&gt; file in &lt;code&gt;~/.config/autostart/&lt;/code&gt;.&#xA;If for some reason you didn't get this file created this is how mine looks:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Version=1.0&#xA;Name=pcloud&#xA;Comment=pcloudstartup script&#xA;Exec=/home/USER/PCLOUD_FOLDER/pcloud&#xA;StartupNotify=false&#xA;Terminal=false&#xA;X-GNOME-Autostart-enabled=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Replace USER and PCLOUD_FOLDER with your values.&lt;/p&gt;&#xA;" OwnerUserId="19143" LastActivityDate="2020-01-25T07:46:28.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22209" PostTypeId="1" CreationDate="2020-01-25T11:52:04.750" Score="0" ViewCount="34" Body="&lt;p&gt;Does anyone knows how to get my current elementary OS 5.1 Hera configuration  to work in an executable usb pendrive?&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2020-01-25T19:58:54.253" Title="How to get an actual copy of my eOs configuration in an executable penrdive?" Tags="|release-hera|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22210" PostTypeId="2" ParentId="22205" CreationDate="2020-01-25T11:58:36.713" Score="0" Body="&lt;p&gt;Try adding &lt;code&gt;user&lt;/code&gt; to the fstab nfs mount options. For example:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;192.168.1.11:/volume1/applications /home/rob/Darth/Applications nfs user,rsize=8192,wsize=8192,timeo=14,intr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-01-25T11:58:36.713" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22211" PostTypeId="1" AcceptedAnswerId="22213" CreationDate="2020-01-25T12:50:30.837" Score="1" ViewCount="483" Body="&lt;p&gt;I have just installed eOS on my Dell xps 9360 and I'm hoping to get a bit more juice out of the aging battery. I see people on win10 undervolting the CPU/GPU to get more battery life and I bumped into this Bash script;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/Mnkai/6a949aff19c0744e30b0f7c324c1fe9d&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/Mnkai/6a949aff19c0744e30b0f7c324c1fe9d&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Which seems to be specifically for i7-8550U (I have i5-7200U)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my questions are;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Should I undervolt?&#xA;Would this script work?&#xA;If it would,how would I use it?&lt;/p&gt;&#xA;" OwnerUserId="20284" LastActivityDate="2020-01-25T19:54:02.397" Title="Undervolting XPS 13 9360" Tags="|battery|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22213" PostTypeId="2" ParentId="22211" CreationDate="2020-01-25T19:54:02.397" Score="0" Body="&lt;p&gt;I use &lt;a href=&quot;https://github.com/georgewhewell/undervolt&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/georgewhewell/undervolt&lt;/a&gt; on my XPS 9560 and works very nicely.  I've created the services and triggers myself as per the guides on that GitHub site and I'm happy with the results of lowering the overall noise and temps a bit.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-25T19:54:02.397" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22214" PostTypeId="2" ParentId="22209" CreationDate="2020-01-25T19:58:54.253" Score="1" Body="&lt;p&gt;I've used Pinguy Builder (&lt;a href=&quot;https://pinguyos.com/2018/05/pinguy-builder-updated-license-change/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pinguyos.com/2018/05/pinguy-builder-updated-license-change/&lt;/a&gt;) for that exact purpose. While it works nicely, it does has some limitations on the SquashFS size so if your installation is too big, you might not be able to build a working Live Environment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, you might Google around for &quot; install linux ubuntu on USB drive&quot;. Never attempted that myself though.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-25T19:58:54.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22215" PostTypeId="2" ParentId="22179" CreationDate="2020-01-25T20:13:06.233" Score="1" Body="&lt;p&gt;I would just ignore it. I also get old(er) nvidia drivers being offered, but I just don't even pay attention to them:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Mw93I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Mw93I.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-25T20:13:06.233" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22216" PostTypeId="1" CreationDate="2020-01-25T22:32:50.157" Score="1" ViewCount="458" Body="&lt;p&gt;I am new linux user using desktop pc with AMD Ryzen 7 3700X 8-Core Processor and &lt;strong&gt;AMD Radeon RX 5700&lt;/strong&gt;, OS 5.1 Hera, Linux 5.0.0-37-generic, GTK 3.22.30.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The issue is that I cannot update my system with sudo apt update and install about 100 packages without screwing up gpu driver.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am currently running on &quot;fresh&quot; elementary os install with only amd proprietary gpu driver installed from &#xA;&lt;a href=&quot;https://www.amd.com/en/support/graphics/amd-radeon-5700-series/amd-radeon-rx-5700-series/amd-radeon-rx-5700&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. &#xA;The system is running fine in this state. However if I run &lt;em&gt;sudo apt update&lt;/em&gt; and &lt;em&gt;sudo apt upgrade&lt;/em&gt; and reboot, the system becomes unusable. The mouse movement is very laggy. Watching videos on youtube was fine though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found out, that using &lt;em&gt;lshw -c video&lt;/em&gt; displays that driver=amdgpu.Then I ran &lt;em&gt;modinfo amdgpu&lt;/em&gt; and the result (in &lt;strong&gt;flawless lagg-less&lt;/strong&gt; state) is filename:       /lib/modules/5.0.0-37-generic/extra/amdgpu.ko.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However after I ran &lt;em&gt;sudo apt upgrade&lt;/em&gt; the result (in &lt;strong&gt;laggy state&lt;/strong&gt;) is filename: /lib/modules/5.3.0-26-generic/kernel/drivers/gpu/drm/amd/amdgpu/amdgpu.ko.&#xA;I tried uninstalling and running install script on proprietary drivers again. At 99% progress it displays WARNING: amdgpu dkms failed for running kernel. Rebooting the system and running &lt;em&gt;lshw -c video&lt;/em&gt; -&gt; &lt;em&gt;modinfo amdgpu&lt;/em&gt; shows again /lib/modules/5.3.0-26-generic/kernel/drivers/gpu/drm/amd/amdgpu/amdgpu.ko.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went through basically every ubuntu amd rx 5700 article google could find. I tried moving firmware manually like &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2425799&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed Additional Drivers (&lt;em&gt;sudo apt install software-properties-gtk software-properties-common&lt;/em&gt;) to check if I can switch between the drivers located in /kernel/drivers and /extra, but it says &quot;no additional drivers&quot; and displays nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to purge package with name something like libdrmamdgpu, but other packages have dependencies on it. Force purge made me unable to boot even to recovery mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried holding packages with new kernel, so I could update just the rest. It installed the new gpu driver anyway and did not allow me to change back. So I went back with Timeshift and tried to hold a few packages that looked like they could be the one installing the new /kernel/driver. Unfortunately I didn't know how to identify the proper packages and the new display driver was installed anyway. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried holding kernel version, running &lt;em&gt;sudo apt upgrade&lt;/em&gt;, rebooting. Then I tried to install the proprietary driver again and the /kernel/driver/ was still the one being used.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have spent approximately 30 hours trying to solve this issue. Posting this on forum is my last resort. If I wasn't running elementary os on my laptop without any issues I would have given up on this a long time ago and just went back to Windows, where the system was running great (&quot;windows great&quot; though).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1)Can anyone tell me how to update everything (even the kernel) and run the system with smooth gpu driver, where the mouse isn't lagging?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2)If this isn't possible, can anyone tell how to hold proper packages so the sudo apt upgrade does not change the gpu driver to /kernel/drivers/gpu/drm/amd/amdgpu/amdgpu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Thank you for your reply.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="20421" LastActivityDate="2020-01-27T02:08:14.200" Title="AMD Radeon RX 5700 driver problems" Tags="|graphic-drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22218" PostTypeId="1" CreationDate="2020-01-25T23:47:28.710" Score="0" ViewCount="911" Body="&lt;p&gt;I followed a guide to install Tweaks but I'm stucked at repository step, because I'm unable to add It because of a error;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command I pasted in terminal was:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And this is what the terminal gives me in output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;Error: retrieving gpg key timed out.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried searching on Google but none seems to have this problem, none seems using Hera at least...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I installed the &lt;code&gt;software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="20422" LastActivityDate="2024-02-22T18:04:10.467" Title="Unable to install Elementary Tweaks on 5.1 Hera" Tags="|release-hera|repositories|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22220" PostTypeId="1" CreationDate="2020-01-26T05:12:18.230" Score="0" ViewCount="204" Body="&lt;p&gt;I have installed elementary OS previously without issues. I wanted to try the latest issue and get the following issue when i check on terminal and following a couple of google searches:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JghV7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JghV7.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20426" LastEditorUserId="15904" LastEditDate="2020-01-29T12:22:39.327" LastActivityDate="2020-01-29T12:22:39.327" Title="Unable to update / PPA unsigned after fresh install - Hera" Tags="|updates|appcenter|release-hera|ppa|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22222" PostTypeId="2" ParentId="22220" CreationDate="2020-01-26T05:55:58.493" Score="1" Body="&lt;p&gt;Found this link in my searches:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13060/error-while-doing-sudo-apt-update-no-release-file&quot;&gt;Error while doing &amp;#39;sudo apt update&amp;#39;: no Release file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was able to do apt upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;App-center still doesn't work&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Update&lt;/em&gt;&lt;/strong&gt;&#xA;edit appcenter, elementary and patches .list flies - remove any refrence to Hera / Juno to Bionic and save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works.&lt;/p&gt;&#xA;" OwnerUserId="20426" LastActivityDate="2020-01-26T05:55:58.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22223" PostTypeId="1" AcceptedAnswerId="22246" CreationDate="2020-01-26T09:55:07.777" Score="2" ViewCount="74" Body="&lt;p&gt;I've noticed a change to the Files app in the most recent update to elementary OS; it now shows git file status (new, modified, staged, etc.):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9GBHS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9GBHS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will more git integration features be coming to the Files app? For instance, having commands like &lt;code&gt;git add&lt;/code&gt; in the right-click context menu would be quite helpful.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2020-01-27T19:25:49.827" Title="Will more git features to coming to Files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22224" PostTypeId="1" CreationDate="2020-01-26T13:11:59.380" Score="0" ViewCount="71" Body="&lt;p&gt;Latest versions in address bar displays file:///Dir1/Dir2.....&#xA;It is bit tricky to copy/paste in to terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Earlier versions (Freya) had just //Dir1/Dir2/.....&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to get around?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards,&#xA;Ivars&lt;/p&gt;&#xA;" OwnerUserId="20429" LastActivityDate="2024-02-06T06:08:46.093" Title="Pantheon- Files address bar content" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22227" PostTypeId="1" CreationDate="2020-01-26T21:00:01.767" Score="1" ViewCount="68" Body="&lt;p&gt;I have a laptop with just elementary os on it. I have a windows 10 iso on a dvd that I want to boot off of. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It isn't booting from the DVD-ROM when I restart it just starts up the os.&#xA;If I try to enter the bios to adjust boot order it goes into grub which just shows 2 options: elementary os and elementary advanced. I can get a grub command line.&#xA;My question is, can I boot from the DVD-ROM in this command line and if so, how?&lt;/p&gt;&#xA;" OwnerUserId="20436" LastActivityDate="2020-01-26T21:00:01.767" Title="Boot from DVD from grub?" Tags="|grub|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22229" PostTypeId="2" ParentId="18197" CreationDate="2020-01-27T00:19:30.467" Score="2" Body="&lt;p&gt;Look, Elementary OS doesn't support Wacom Devices in the System Settings, but if you download the  Gnome-Control-Center Package you will be able to configure your Wacom Table as you would in any other Gnome distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run this command to install  Gnome-Control-Center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-control-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then you just run Gnome-Control-Center with the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=GNOME gnome-control-center --overview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go to the Devices tab and then Wacom Tablet tab and that's it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope that will be helpful and sorry i didn't see the post before.&lt;/p&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2020-01-27T00:19:30.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22230" PostTypeId="2" ParentId="19604" CreationDate="2020-01-27T00:51:09.967" Score="0" Body="&lt;p&gt;You can also add a blacklist file inside /etc/wingpanel.d/ called ayatana.blacklist and include the Package &quot;nm-applet&quot; inside it (without the quotes).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As reference you can look at &lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1610627&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/elementaryos/+bug/1610627&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2020-01-27T00:51:09.967" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22232" PostTypeId="2" ParentId="22216" CreationDate="2020-01-27T02:08:14.200" Score="1" Body="&lt;p&gt;This is &lt;strong&gt;NOT&lt;/strong&gt; supported, but I do it on my laptop so you might very well give it a shot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Follow instructions &lt;a href=&quot;https://vitux.com/update-linux-kernel-on-ubuntu-through-ukuu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt; to install Ukuu. Then run the utility and install a newer Kernel (I'm currently using &lt;strong&gt;5.4.13-050413-generic&lt;/strong&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When booting, go to the Advanced menu in GRUB and select the kernel that you just installed. Give it a test-drive and report back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-27T02:08:14.200" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22233" PostTypeId="2" ParentId="13969" CreationDate="2020-01-27T08:05:13.190" Score="1" Body="&lt;p&gt;The procedure, as posted by &lt;a href=&quot;https://elementaryos.stackexchange.com/users/14270/carlos&quot;&gt;@Carlos&lt;/a&gt;, is confirmed to be working:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open a &lt;code&gt;terminal&lt;/code&gt; window and execute &lt;code&gt;sudo vmplayer&lt;/code&gt; &lt;strong&gt;OR&lt;/strong&gt; modify the VMware Workstation Player &lt;code&gt;.desktop&lt;/code&gt; file as outlined in the original answer&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Confirmed with the following system and drivers:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementaryOS Hera &lt;strong&gt;5.3.0-26-generic&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;VMware Workstation Player &lt;strong&gt;15.5.1 build-15018445&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Nvidia driver &lt;strong&gt;340.107&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="20440" LastActivityDate="2020-01-27T08:05:13.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22234" PostTypeId="2" ParentId="19335" CreationDate="2020-01-27T10:41:12.607" Score="0" Body="&lt;p&gt;This worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo dpkg --add-architecture i386&lt;br&gt;&#xA;wget -nc &lt;a href=&quot;https://dl.winehq.org/wine-builds/winehq.key&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dl.winehq.org/wine-builds/winehq.key&lt;/a&gt;&lt;br&gt;&#xA;sudo apt-key add winehq.key&lt;br&gt;&#xA;sudo apt install software-properties-common&lt;br&gt;&#xA;sudo add-apt-repository ppa:cybermax-dexter/sdl2-backport&lt;br&gt;&#xA;sudo apt-add-repository 'deb &lt;a href=&quot;https://dl.winehq.org/wine-builds/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dl.winehq.org/wine-builds/ubuntu/&lt;/a&gt; bionic main'&lt;br&gt;&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt install --install-recommends winehq-stable  &lt;/p&gt;&#xA;" OwnerUserId="20389" LastActivityDate="2020-01-27T10:41:12.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22235" PostTypeId="2" ParentId="22220" CreationDate="2020-01-27T10:43:44.700" Score="0" Body="&lt;p&gt;Try reboot , some reason this worked for me. I had issue few times after installing apps via terminal &lt;/p&gt;&#xA;" OwnerUserId="20389" LastActivityDate="2020-01-27T10:43:44.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22237" PostTypeId="1" AcceptedAnswerId="22239" CreationDate="2020-01-27T16:34:01.960" Score="4" ViewCount="199" Body="&lt;p&gt;I am referring to the effect eg. the session indicator has or the keyboard language adder has. I'd prefer it with the responsiveness the session listbox has.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QkgmR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QkgmR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13261" LastActivityDate="2020-01-27T18:08:51.853" Title="I want to add the listbox scroll fade effect in my app - how?" Tags="|gtk|vala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22238" PostTypeId="2" ParentId="22125" CreationDate="2020-01-27T17:08:34.833" Score="1" Body="&lt;p&gt;This is a bug I've seen since first using eOS 0.4. Only solutions I have found to this are a) Configuring the monitors side by side instead of vertical, or b) Setting the external monitor to be primary (press the star icon in settings).&lt;/p&gt;&#xA;" OwnerUserId="17095" LastActivityDate="2020-01-27T17:08:34.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22239" PostTypeId="2" ParentId="22237" CreationDate="2020-01-27T17:21:28.773" Score="3" Body="&lt;p&gt;The most common way a designer can do this is by applying on an upper layer a semitransparent png image or gradient with fading transparency from 1 to 0 and white color. Another option is a gtk box shadow with white color. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit: I believe this is what are you looking for:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;kbd&gt;ctl&lt;/kbd&gt;+&lt;kbd&gt;shft&lt;/kbd&gt;+&lt;kbd&gt;d&lt;/kbd&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Rdu0p.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rdu0p.png&quot; alt=&quot;dev tool&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The style is into gtk-widgets.css, line 3840&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;popover undershoot.top {&#xA;background:&#xA;    linear-gradient(&#xA;        @bg_color 0%,&#xA;        alpha(@bg_color, 0) 50%&#xA;    );}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Sgnyc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sgnyc.png&quot; alt=&quot;gtk-widgets.css&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-01-27T18:08:51.853" LastActivityDate="2020-01-27T18:08:51.853" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22241" PostTypeId="2" ParentId="22237" CreationDate="2020-01-27T17:51:37.600" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://valadoc.org/gtk+-3.0/Gtk.ScrolledWindow.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gtk.ScrolledWindow&lt;/a&gt; is what you're looking for. It comes with everything you see in the screenshot you added: the vertical scroll bar to the right, the blue hue animations when reaching the top or the bottom of the list...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, I suggest creating a &lt;a href=&quot;https://valadoc.org/gtk+-3.0/Gtk.ListBox.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gtk.ListBox&lt;/a&gt;, populate it with whatever widgets you might need, and then add it to a Gtk.ScrolledWindow. Then, add the Gtk.ScrollerWindow to whatever container you need it to appear into. It will most likely inherit the container's width and height, and try to display the ListBox's contents as pretty as possible. Using a ListBox will also allow you to easily implement filtering of it's contents, if needed.  I can supply an example &lt;a href=&quot;https://github.com/popvladaurel/torrential-remote/blob/75d092cc2d7e1883f77115ffd9bc9cd40a14b748/src/Main/Window.vala#L13&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; if you're interested. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This a screenshot of the implementation linked above:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Cu4Gq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Cu4Gq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-01-27T18:03:46.757" LastActivityDate="2020-01-27T18:03:46.757" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22242" PostTypeId="1" CreationDate="2020-01-27T18:09:41.680" Score="1" ViewCount="13" Body="&lt;p&gt;I have installed eOS 5.1 Hera (ubuntu 18.04.3 based) with linux kernel 5.3.0-26 and GTK 3.22.30.&#xA;In the last upgrade I can't see well some desktop items (pay atemption to top and bottom):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/I78rF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/I78rF.jpg&quot; alt=&quot;desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to solve this?&lt;/p&gt;&#xA;" OwnerUserId="20447" LastActivityDate="2020-01-27T18:09:41.680" Title="problems seeing some aspects on the desktop" Tags="|desktop|release-hera|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22243" PostTypeId="2" ParentId="22201" CreationDate="2020-01-27T19:13:28.440" Score="0" Body="&lt;p&gt;When I have seen this type of error ... there was a another apt update process running ... do a ps -ef |grep apt and see if you can find and kill that process and them run the fix&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2020-01-27T19:13:28.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22244" PostTypeId="2" ParentId="22201" CreationDate="2020-01-27T19:20:35.663" Score="1" Body="&lt;p&gt;I see a few errors. The important one is that it looks like you have some broken package lists files. In order to fix it, an option is to clear all files and recreate them again. To remove them you can execute into terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;it will remove all package files and directories, &lt;strong&gt;it is important to have an asterick (*) at the end of the line&lt;/strong&gt; in order to keep the directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After doing this, use &lt;code&gt;sudo apt update&lt;/code&gt; in order to get the files again. Post a comment if you have any errors after doing this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are some other errors - a few of your repositories in your lists are not signed (log file from the other comment), you better remove them from your lists, because they do not work like this and spotify and opera never will be updated. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-01-27T19:20:35.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22245" PostTypeId="2" ParentId="22224" CreationDate="2020-01-27T19:20:49.587" Score="0" Body="&lt;p&gt;There is an open PR about this (&lt;a href=&quot;https://github.com/elementary/files/pull/1149&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/pull/1149&lt;/a&gt;) awaiting review and merging.  Should be fixed in the next release.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-01-27T19:20:49.587" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22246" PostTypeId="2" ParentId="22223" CreationDate="2020-01-27T19:25:49.827" Score="3" Body="&lt;p&gt;Yes, requests for other git features have already been filed at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; such as the ability to change branch.  I do not think &lt;code&gt;git add&lt;/code&gt; has been requested there yet so please do so if you wish&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-01-27T19:25:49.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22248" PostTypeId="1" CreationDate="2020-01-27T21:14:32.643" Score="1" ViewCount="73" Body="&lt;p&gt;At first: Sorry for my bad English!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gladly I want to use the parent control-feature in (a fresh installed) elementary OS 5.1 Hera. But when I create a standard-user and configure all restrictions, all the settings for this account seems to have no effect (even after reboot). So, is there a special step to consider or is it already a known problem?&lt;/p&gt;&#xA;" OwnerUserId="20450" LastActivityDate="2020-01-27T21:14:32.643" Title="parent control doesn't work?" Tags="|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22250" PostTypeId="2" ParentId="7371" CreationDate="2020-01-28T01:20:54.143" Score="0" Body="&lt;p&gt;I currently experience wifi driver issue with eOS 5.1 / Hera on Kernel version 5.0 live-running on Dell XPS 15 (7590) FHD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get no wifi out of the box, it doesn't recognize any wifi card.&#xA;when i do sudo lshw -C network , I only see the Bluetooth card.&#xA;Unfortunately, the laptop doesn't have an Ethernet card, therefore i could  only access internet thru usb tethering ( didn't work) or bluetooth ( didn't work).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After doing some research I found the issue could be the kernel, and said kernel needs to be update to 5.1 or higher version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just tried PopOS ( the latest version as of this writing ) and it comes with kernel 5.3. -&gt; all works fine, wifi card is recognized and works no problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;eOS team needs to update the kernel to +5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT 4.19&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just tried the latest of Elementary OS 5.1 with kernel 5.3 finally. Guess what ? ---&gt; NO MORE WIFI PROBLEMS &amp;amp; BT works great as well from the live-usb. Now I'm considering seriously installing it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks eOS Team&lt;/p&gt;&#xA;" OwnerUserId="20452" LastEditorUserId="20452" LastEditDate="2020-04-19T19:38:29.327" LastActivityDate="2020-04-19T19:38:29.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22252" PostTypeId="1" AcceptedAnswerId="22257" CreationDate="2020-01-28T10:32:56.220" Score="0" ViewCount="517" Body="&lt;p&gt;I installed zoom 64 Deb and it worked but when I tried to make a video meeting, it did nothing..  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;5.1 eOS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many students use this app and Linux is well supported by zoom.&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2021-05-04T19:48:26.903" Title="Zoom meeting app does not work (it installs)" Tags="|applications|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22254" PostTypeId="1" CreationDate="2020-01-28T14:56:25.873" Score="1" ViewCount="121" Body="&lt;p&gt;I have an intel pentium g4400 cpu with a Nvidia GTX 1060 Grapchic Card. I've installed elemetary OS Hera on it and after installing the graphic card driver I can't shutdown. The PC freezes at elementary logo forever. Please help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you !&lt;/p&gt;&#xA;" OwnerUserId="20456" LastEditorUserId="16827" LastEditDate="2020-01-31T09:48:04.117" LastActivityDate="2024-02-09T21:04:30.483" Title="Shutdown Problem on elementary OS Hera" Tags="|graphic-drivers|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22255" PostTypeId="1" CreationDate="2020-01-28T18:21:41.180" Score="0" ViewCount="88" Body="&lt;p&gt;I am trying to install 5.1 on my mid 2017 macbook from a flash drive. I get to the welcome screen, but I can't do anything there, as the trackpad and keyboard are not responding.&#xA;As the macbook has only one usb-c port that is occupied by the flash drive I can't connect any other keyboard or mouse.&#xA;I did not find a solution for similar questions here, they mostly refer to trackpad issues that occur after installation, but I don't even get to the point of finishing the installation.&lt;/p&gt;&#xA;" OwnerUserId="20461" LastActivityDate="2024-02-08T18:02:55.383" Title="Keyboard and trackpad are not responding when booting from flash drive on my 2017 macbook" Tags="|system-installation|keyboard|touchpad|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22256" PostTypeId="2" ParentId="22254" CreationDate="2020-01-28T19:37:49.070" Score="0" Body="&lt;p&gt;Try hit &lt;strong&gt;Esc&lt;/strong&gt; and see what it says/where it stalls, eventually take a picture of it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-01-28T19:37:49.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22257" PostTypeId="2" ParentId="22252" CreationDate="2020-01-28T19:42:07.390" Score="2" Body="&lt;p&gt;I don't know this app, but have you tried to run Zoom through the terminal. It might tell you something more what's going on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-01-28T19:42:07.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22258" PostTypeId="2" ParentId="22252" CreationDate="2020-01-28T19:54:36.560" Score="1" Body="&lt;p&gt;Did you tried downloading it again? I am using amd 64 in 5.1 without problems.&lt;/p&gt;&#xA;" OwnerUserId="20313" LastActivityDate="2020-01-28T19:54:36.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22259" PostTypeId="1" CreationDate="2020-01-28T21:19:19.103" Score="0" ViewCount="163" Body="&lt;p&gt;I have two displays and i'd like to shut off the display on my laptop but it won't turn off.  I must be missing something but I don't know what.  I turn it off in the settings menu but it still stays on.  Any help would be great.  My video card is built in from AMD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tony&lt;/p&gt;&#xA;" OwnerUserId="20462" LastActivityDate="2024-02-08T06:04:25.523" Title="Two displays one wont turn off" Tags="|display|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22260" PostTypeId="2" ParentId="22259" CreationDate="2020-01-28T23:35:44.737" Score="0" Body="&lt;p&gt;You can setup this at System Settings &gt; Displays.&#xA;There should be an option that says &quot;Use this Display&quot;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BQFFR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BQFFR.png&quot; alt=&quot;Display settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also close your laptop lid while there is an external monitor connected. That will turn off the laptop integrated display and set the external monitor as the main display.&lt;/p&gt;&#xA;" OwnerUserId="20124" LastActivityDate="2020-01-28T23:35:44.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22261" PostTypeId="2" ParentId="18383" CreationDate="2020-01-29T04:53:23.870" Score="1" Body="&lt;p&gt;Despite this one being a bit old already (see original question date) I'd like to point out something as someone else might stumble here looking for an answer. I just yesterday installed elementary the first time and fell in love. When you start the installation process, you are asked a couple of questions. One of them is whether you want some third party drivers and such installed as well. I suggest answering &quot;yes&quot; to that. The first reason I even took a look to elementary was simple - I googled for a distro that would support Broadcom wireless devices, and the first hit was something like &quot;elementary OS did the trick for me!&quot; so I picked it. And I'm happy I did.&lt;/p&gt;&#xA;" OwnerUserId="20466" LastActivityDate="2020-01-29T04:53:23.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22262" PostTypeId="1" CreationDate="2020-01-29T10:57:03.523" Score="2" ViewCount="139" Body="&lt;p&gt;I have a Logitech M705 wireless mouse through unifying receiver and a Bluetooth Micorsoft Keyboard. Both work just fine in OS but they won't wake the computer from suspend state. I guess the usb power to the ports is shut off during suspend state.&lt;/p&gt;&#xA;" OwnerUserId="20471" LastActivityDate="2024-02-09T23:08:31.130" Title="Can't wake the computer from suspend state with wireless mouse and keyboard" Tags="|suspend|bluetooth|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22263" PostTypeId="1" CreationDate="2020-01-29T11:09:24.967" Score="0" ViewCount="103" Body="&lt;p&gt;Been trying to install 5.1 on dual boot with windows 10.&#xA;Created a bootable usb and it goes on right onto try or install elementary OS. I press enter and then nothing - screen stays black / blank forever. Help please. Need to run away from windows. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running intel core i3 with 128g ssd 8gb ram and Intel uhd 625 graphics.&lt;/p&gt;&#xA;" OwnerUserId="20472" LastEditorUserId="15904" LastEditDate="2020-01-31T09:08:43.193" LastActivityDate="2020-02-07T08:40:48.237" Title="Unable to install / blank screen" Tags="|system-installation|release-hera|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22264" PostTypeId="2" ParentId="17238" CreationDate="2020-01-29T14:02:38.730" Score="0" Body="&lt;p&gt;Find this:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/702628/ubuntu-hyper-v-guest-display-resolution-win-10-15-04&quot;&gt;Hyper-V with Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The script used in this thread is for GNOME.&#xA;It's still unclear to me on how to modify this for pantheon, the window manager for Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="20464" LastActivityDate="2020-01-29T14:02:38.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22266" PostTypeId="1" CreationDate="2020-01-29T17:04:50.247" Score="0" ViewCount="764" Body="&lt;p&gt;I added the correct repository ok but when I try to install Elementary Tweaks i get this message in terminal&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)&#xA;E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I haven't seen any instructions anywhere saying anything about needing to be root to install it so what's the problem? I'm relatively new to Linux and keen to learn and progress but issues like this are putting me off.&lt;/p&gt;&#xA;" OwnerUserId="20475" LastEditorUserId="16827" LastEditDate="2020-01-31T09:23:00.413" LastActivityDate="2020-01-31T13:03:19.983" Title="Can't install Tweaks on 5.1 Hera" Tags="|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22268" PostTypeId="2" ParentId="22266" CreationDate="2020-01-29T19:29:26.917" Score="2" Body="&lt;p&gt;You always need root when you install any deb file or using &lt;code&gt;apt&lt;/code&gt; to install anything. Make sure to use &lt;code&gt;sudo&lt;/code&gt; on such commands.&lt;/p&gt;&#xA;" OwnerUserId="13261" LastActivityDate="2020-01-29T19:29:26.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22269" PostTypeId="2" ParentId="22266" CreationDate="2020-01-29T19:57:39.377" Score="0" Body="&lt;p&gt;Just run the command elevated using &lt;code&gt;sudo&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20459" LastEditorUserId="20459" LastEditDate="2020-01-31T13:03:19.983" LastActivityDate="2020-01-31T13:03:19.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22270" PostTypeId="2" ParentId="22259" CreationDate="2020-01-29T20:09:14.247" Score="0" Body="&lt;p&gt;Try '&lt;strong&gt;xrandr --listmonitors&lt;/strong&gt;' from a terminal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll see the display names (example eDP-1 or DP-1-1).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For Example DP-1&#xA;Now from the command line '&lt;strong&gt;xrandr --output DP-1 --off&lt;/strong&gt;'&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-29T20:09:14.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22273" PostTypeId="2" ParentId="22255" CreationDate="2020-01-30T09:43:40.543" Score="0" Body="&lt;p&gt;There is a relevant AskUbuntu answer that may help you: &lt;a href=&quot;https://askubuntu.com/a/968740/22318&quot;&gt;https://askubuntu.com/a/968740/22318&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Suggestion is to perform installation using external keyboard and mouse (a USB hub may help you here) and then install some specific drivers, following instructions here: &lt;a href=&quot;https://github.com/Dunedan/mbp-2016-linux#keyboard--touchpad&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Dunedan/mbp-2016-linux#keyboard--touchpad&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions for your laptop should be these (from &lt;a href=&quot;https://github.com/roadrunner2/macbook12-spi-driver#dkms-module-debian--co&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/roadrunner2/macbook12-spi-driver#dkms-module-debian--co&lt;/a&gt;):&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;DKMS module (Debian &amp;amp; co):&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;As root, do the following (all MacBook's and MacBook Pro's except MacBook8,1 (2015)):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;echo -e &quot;\n# applespi\napplespi\nspi_pxa2xx_platform\nintel_lpss_pci&quot; &amp;gt;&amp;gt; /etc/initramfs-tools/modules&#xA;&#xA;apt install dkms&#xA;git clone https://github.com/roadrunner2/macbook12-spi-driver.git /usr/src/applespi-0.1&#xA;dkms install -m applespi -v 0.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19056" LastActivityDate="2020-01-30T09:43:40.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22276" PostTypeId="1" CreationDate="2020-01-30T15:31:51.800" Score="0" ViewCount="80" Body="&lt;p&gt;I would need to add a new entry in the applications menu related to a command to be executed in the terminal and I tried to use this expression in the .desktop file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=pantheon-terminal -e &quot;bash -c 'cd /opt/FlexServer; sudo ./lmgrd -c /opt/FlexServer/safe.lic; $SHELL'&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but it does not work in Elementary while a similar expression using gnome-terminal works in Ubuntu 18.04.&lt;br&gt;&#xA;I tried to use the AppEditor utility too but without success.&lt;br&gt;&#xA;How can I solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="20324" LastActivityDate="2020-01-30T15:31:51.800" Title="How to create a slingshot menu entry for a terminal command in Elementary OS?" Tags="|pantheon-terminal|slingshot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22280" PostTypeId="2" ParentId="22254" CreationDate="2020-01-30T21:59:08.970" Score="0" Body="&lt;p&gt;If this is a laptop, try from a terminal session&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'sudo prime-select intel'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That should disable the nvidia gpu. Try rebooting (it might hang one last time). And then do multiple boot cycles and please report back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hitting &lt;strong&gt;ESC&lt;/strong&gt; (as previously indicated) might give you some more information of what's going on in the backend.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-01-30T21:59:08.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22281" PostTypeId="1" AcceptedAnswerId="22285" CreationDate="2020-01-31T06:43:48.580" Score="2" ViewCount="196" Body="&lt;p&gt;I am trying to automate launching a few programs I use every time I do a particular activity. I generally launch these and then arrange them manually into different workspace.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was wondering how to launch a program in a new workspace from the terminal, so that I could include this in a bash shell script.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have wmctrl installed&lt;/p&gt;&#xA;" OwnerUserId="20491" LastEditorUserId="20491" LastEditDate="2020-01-31T09:27:19.917" LastActivityDate="2020-01-31T09:37:41.227" Title="How do I launch a new application in a new workspace from terminal?" Tags="|ubuntu|workspace|bash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22282" PostTypeId="1" CreationDate="2020-01-31T07:54:17.497" Score="0" ViewCount="738" Body="&lt;p&gt;I was stuck with my first linux MacBook Pro (17&quot; 2007 core2 duo era) with no possibilities to either read an USB other than MacOS and it didn't recognize my CD-RW for installing something else, so I wondered if it was possible after all to update from Loki 0.4.1 to Hera 5.1.&lt;/p&gt;&#xA;" OwnerUserId="12077" LastActivityDate="2024-02-10T17:00:40.150" Title="Update from Loki to Hera stable?" Tags="|release-loki|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22283" PostTypeId="2" ParentId="22282" CreationDate="2020-01-31T07:54:17.497" Score="0" Body="&lt;p&gt;I can assure you that it is possible and that the result is great! Hera uses seemlessly (I didn't check) less ressources, runs smoother, and close lid suspend/resume is now working fine and fully supported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now please backup everything first, and take my word of caution: I did encounter a small error but it could be solved along the way, but you have to be ready to work it out in console-only mode. I really advise to do so to avoid upgrade issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recommend to follow &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16482/update-from-loki-to-juno-stable&quot;&gt;this post's green V'd reply&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Nevertheless, I followed a simpler route than in the above post reply: I only backed up the indicated files in the post, but I didn't remove them, and I only did that and the update worked fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look in advance for the way to log off graphical mode on Loki:&#xA;This worked for me:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;session=`loginctl session-status | head -n 1 | awk '{print $1}'`&#xA;loginctl terminate-session $session&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The error that I encountered is as follows: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libdvd-pkg: 'apt-get check' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to which I did only the following (which was then fixed by simply resuming the update process):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I had to reboot and install from console again, as in recovery mode (push escape on reboot to reach grub), and from the login screen (Fn+Ctrl+Alt+F1) to go to login, login and password then restart the apt instructions again to continue the upgrade. My screen blacked out repetively due to the login mode timeout, but I could see by (Fn+Crtl+Alt+F1) again as many times as needed. It's a little adventurous for the less experienced but it worked!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget to clean everything as the post indicates, by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once the whole upgrade procedure is done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The update goes straight from Loki to Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enjoy! &lt;/p&gt;&#xA;" OwnerUserId="12077" LastEditorUserId="12077" LastEditDate="2020-02-01T10:29:21.497" LastActivityDate="2020-02-01T10:29:21.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22285" PostTypeId="2" ParentId="22281" CreationDate="2020-01-31T09:25:58.883" Score="1" Body="&lt;p&gt;quite simple actually using wmctrl and sleep. This is what I did:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;wmctrl -s 0                ############################################&#xA;                           # Switches to first workspace [workspaces are&#xA;                           # numbered from 0]&#xA;                           ############################################&#xA;&#xA;firefox -private &amp;amp;         ############################################&#xA;                           # launches firefox in private mode in background&#xA;                           #&#xA;libreoffice --calc &amp;amp;       # launches libreoffice calc (alternative to MS&#xA;                           # Office Excel)&#xA;                           ############################################&#xA;&#xA;sleep 10                   ############################################&#xA;                           # Application GUIs take some time to launch.&#xA;                           # Some more than others. We want to wait before&#xA;                           # running the next command) for some time before&#xA;                           # switching workspaces, so that it doesn't &#xA;                           # switch before all applications we want in it&#xA;                           # have had enough time to launch. &#xA;                           # N is in seconds. Try different values until&#xA;                           # you have figured out the right value for your&#xA;                           # system and set of applications&#xA;                           #############################################&#xA;&#xA;wmctrl -s 1                # Switches to second workspace&#xA;evince ~/path/to/file.pdf &amp;amp;&#xA;sleep 1.5                  # evince is lightweight and the pdf file I am&#xA;                           # launching isn't that large either&#xA;&#xA;wmctrl -s 2                # Switches to third workspace&#xA;mindmaster &amp;amp;&#xA;sleep 8&#xA;&#xA;# and so on....&#xA;&#xA;wmctrl -s 0 # Returns back to the first workspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20491" LastEditorUserId="20491" LastEditDate="2020-01-31T09:37:41.227" LastActivityDate="2020-01-31T09:37:41.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22286" PostTypeId="2" ParentId="15401" CreationDate="2020-01-31T11:46:25.530" Score="0" Body="&lt;p&gt;I have a slightly different problem; AppCenter is notifying me that there are updates, and when I click on AppCenter/Installed, it shows me the updates. However, when I click on &quot;Update all&quot; and enter my password, in less than a second I see in this order; &quot;Loading cache&quot;, &quot;Finished&quot;, &quot;Starting&quot; and it stops, not having updated anything, still showing the same updates.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TgzFT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TgzFT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, when I do &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt-get update&#xA;  sudo apt-get upgrade&#xA;  it seems to work, but after that AppCenter still shows the same updates and still behaves the same. I don't know what is going on, perhaps AppCenter cache needs to be cleared, but I don't know how.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I can install other apps (I installed a simple card game successfully)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have elementary OS 5.1 Hera, Built on Ubuntu 18.04.3 LTS, Linux 4.15.0-74- generic, GTK 3.22.30 on an HP EliteBook-840-G3 laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything else seems to work fine.&#xA;What should I do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="20495" LastActivityDate="2020-01-31T11:46:25.530" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22288" PostTypeId="2" ParentId="22262" CreationDate="2020-01-31T18:30:28.327" Score="0" Body="&lt;p&gt;Try setting it up on the BIOS. According to your BIOS you can find some option to tweak that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If there is not option in your BIOS for that, you can also use &lt;code&gt;tlp&lt;/code&gt;. Check &lt;a href=&quot;https://askubuntu.com/questions/185274/how-can-i-disable-usb-autosuspend-for-a-specific-device&quot;&gt;this&lt;/a&gt; question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="20124" LastActivityDate="2020-01-31T18:30:28.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22289" PostTypeId="1" CreationDate="2020-02-01T00:13:44.453" Score="0" ViewCount="41" Body="&lt;p&gt;I have recently installed elementaryOS on to my sisters HP streampad as the dreaded windows killed the system with updates.&#xA;Everything seems to work fine however the keyboard does not work and im at a loss with it. &#xA;It works fine in the bios which is UEFI but not once the OS is loaded?&#xA;I have looked around online but nothing seems to work. Any help would be greatly appreciated. &lt;/p&gt;&#xA;" OwnerUserId="20503" LastActivityDate="2020-03-04T06:02:25.287" Title="keyboard wont work!" Tags="|keyboard|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22290" PostTypeId="2" ParentId="22152" CreationDate="2020-02-01T01:58:11.883" Score="-1" Body="&lt;p&gt;elementary OS 0.4.1 Loki&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Photos 0.2.4&#xA;(the photo viewer that came with the install of elementary os)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;question about &quot;crop&quot;&#xA;last week i had to crop a photo to a specified size, so i set the custom size and cropped the photo. now i am unable to access the custom option, and every time i click the crop button the previous custom size is selected. i have searched google, unable to see how to reset the default settings. have tried uninstalling the app, same results. i am running out of ideas of how or who to ask for help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;please and thank you&lt;/p&gt;&#xA;" OwnerUserId="20340" LastActivityDate="2020-02-01T01:58:11.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22292" PostTypeId="2" ParentId="2146" CreationDate="2020-02-01T10:22:14.667" Score="0" Body="&lt;p&gt;after fiddeling with drivers I lost the system settings object in Elemtary OS 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This command resolved it. Thanks @Marc-Aurel Zent&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20381" LastActivityDate="2020-02-01T10:22:14.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22294" PostTypeId="1" AcceptedAnswerId="22297" CreationDate="2020-02-01T12:38:46.043" Score="0" ViewCount="402" Body="&lt;p&gt;I have followed this &lt;a href=&quot;https://snapcraft.io/install/p7zip-desktop/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;tutorial&lt;/a&gt; from &lt;strong&gt;snapcraft.io&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;everything works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but then I did this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install p7zip-desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and I receive an error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;error: snap &quot;p7zip-desktop&quot; has &quot;install-snap&quot; change in progress&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20508" LastEditorUserId="15904" LastEditDate="2020-02-04T02:29:55.700" LastActivityDate="2020-02-04T02:29:55.700" Title="Cant install 7zip on elementary OS 5.1 Hera" Tags="|software-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22295" PostTypeId="2" ParentId="17452" CreationDate="2020-02-02T02:12:24.173" Score="5" Body="&lt;p&gt;the network icon was duplicated, how to leave only what is native to the system?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/09aAc.jpg&quot; rel=&quot;noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/09aAc.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20513" LastActivityDate="2020-02-02T02:12:24.173" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22296" PostTypeId="2" ParentId="21972" CreationDate="2020-02-02T10:03:02.853" Score="1" Body="&lt;p&gt;Tweaks do not really help, most windows follow the decoration (e.g., &quot;minized on right&quot; or &quot;windows style&quot;) but several apps (VLC, SM PLayer, UM PLayer, Virtualbox, Teamviewer, DoubleCommander, Gigolo) don't.&lt;/p&gt;&#xA;" OwnerUserId="18096" LastActivityDate="2020-02-02T10:03:02.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22297" PostTypeId="2" ParentId="22294" CreationDate="2020-02-02T13:15:02.753" Score="0" Body="&lt;p&gt;This error means that snap is doing something in the background. You can see what is going on by typing the following in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;snap changes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If after some time the situation doesn't resolve itself you can abort any of the processes that are listed by typing:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap abort id&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;NOTE:  &quot;id&quot; should be replaced by the number at the beginning of the row of the process you want to abort (e.g. sudo snap abort 123)&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-02T13:15:02.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22298" PostTypeId="2" ParentId="21972" CreationDate="2020-02-02T19:33:04.957" Score="1" Body="&lt;p&gt;I am using the flatpak version of VLC along with OS X window controls and I have the minimize button.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DKBGW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DKBGW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-02T19:33:04.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22300" PostTypeId="1" AcceptedAnswerId="22301" CreationDate="2020-02-03T02:13:59.273" Score="0" ViewCount="1301" Body="&lt;p&gt;I was on elementaryOS Loki and I clicked the Update button on AppCenter which brought my elementaryOS to 5.1 Hera. After various days I noticed that any applications that are not cured for elementaryOS, for example Firefox, Visual Studio Code, Unity (game engine), etc, don't work properly when you open a gui to save a file. The top navigation for saving files doesn't work on non cured applications. In the case of Unity, the clicks anywhere on the user interface don't match the position of the cursor. The same sometimes happens in Firefox.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wanted to know if there is a way to reinstall the display manager, the desktop environment, and the window manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have access to safe mode so I don't mind booting into it to completely uninstall those, reboot, and then do a clean install of them again if necessary.&lt;/p&gt;&#xA;" OwnerUserId="9326" LastActivityDate="2020-02-03T05:19:57.593" Title="How to reinstall display manager, window manager, and desktop environment?" Tags="|display|pantheon|window-manager|gnome|desktop-environment|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22301" PostTypeId="2" ParentId="22300" CreationDate="2020-02-03T05:19:57.593" Score="0" Body="&lt;p&gt;You might want to give &lt;code&gt;sudo apt install --reinstall elementary-desktop&lt;/code&gt; a try and report if that fixed it for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-03T05:19:57.593" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22302" PostTypeId="2" ParentId="22289" CreationDate="2020-02-03T05:23:54.697" Score="1" Body="&lt;p&gt;You might want to check &lt;a href=&quot;https://h30434.www3.hp.com/t5/Windows/Linux-on-the-HP-Stream-tablet/td-p/6675613&quot; rel=&quot;nofollow noreferrer&quot;&gt;this site&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It says: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;The Secure Boot option needs to be disabled within the UEFI setup menu.&#xA;  A OTG adapter and powered USB hub with an external mouse and keyboard are required to do the installation.  An un-powered hub may work but it will read the USB drive slowly and may fail reading it since the Stream's USB port provides very little power from the internal battery.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This might do the trick for you and maybe trying after the installation ends to see if it detects the KB.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-03T05:23:54.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22303" PostTypeId="1" CreationDate="2020-02-03T09:36:09.170" Score="0" ViewCount="119" Body="&lt;p&gt;I can't use the keyboard shortcut for lock. I tried the key combination  + L but it doesn't work. Hope its a bug. &lt;/p&gt;&#xA;" OwnerUserId="20523" LastActivityDate="2020-02-03T09:36:09.170" Title="elementary OS elementary OS 5.1 Hera shortcut of lock" Tags="|release-hera|lock|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22306" PostTypeId="1" CreationDate="2020-02-03T22:36:45.673" Score="2" ViewCount="3384" Body="&lt;p&gt;I'm planning on entering into the software/web development field and would like to pursue either Computer Science or Computer Engineering as a major when I go to college (within the year). Before that, though, I would like to develop skills in the related fields and sub-fields. So that brings me to my question -- is elementary OS good for programming beginners? And if so, is there any links I can follow that'll tell me the best apps and ways to get started? A bit of a silly question for sure, but just wondering. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="20531" LastActivityDate="2020-02-04T01:58:06.620" Title="Is elementary OS good for programming beginners?" Tags="|programming|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22307" PostTypeId="2" ParentId="22306" CreationDate="2020-02-03T23:03:18.907" Score="1" Body="&lt;p&gt;I'd say elementary OS is as good as any other flavor of Linux for learning programming. You can install many different compilers and interpreters. Python should already be installed. I think gcc for C programming is also pre-installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are many good IDEs to choose from: PyCharm, Atom, Visual Studio Code, Sublime Text, or even Geany.  Microsoft's Visual Studio is an industry standard IDE.  Of course there is also Code, which is elementary OS's own coding environment that comes pre-installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just my opinion. I'm sure others will share theirs.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-02-03T23:03:18.907" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22308" PostTypeId="2" ParentId="22306" CreationDate="2020-02-04T01:58:06.620" Score="3" Body="&lt;p&gt;I made the switch from macOS to elementary OS a few months back because I am bit tired of Apple's ways (a different rant) and if anything improved my development workflow. I thought I would have to give up some of the niceties of my Macbook Pro and macOS but that hasn't been the case. I am a full-stack web developer using JavaScript front-end and back-end frameworks as well as Ruby on Rails. I run both my Node.js and Rails backend API's in Docker containers and everything works perfectly. Some of the applications I user are Git, Visual Studio Code (code editor), Postman (REST API testing), GIMP, Inkscape, &amp;amp; Figma. I didn't find anything to be difficult to install and configure.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I can't do is iOS development which I don't do often so I have an older Mac Mini that I do that on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck and ask questions if you need help!&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-04T01:58:06.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22309" PostTypeId="1" AcceptedAnswerId="22323" CreationDate="2020-02-04T05:59:50.363" Score="0" ViewCount="69" Body="&lt;p&gt;I installed the Russian version of the operating system (the problem may be repeated in operating systems in other languages). An error occurred while trying to search in Epiphany. It is related to the fact that Google is selected by default for search, but in the settings instead of &lt;a href=&quot;https://google.com/search?q=%s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://google.com/search?q=%s&lt;/a&gt; or &lt;a href=&quot;https://google.ru/search?q=%s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://google.ru/search?q=%s&lt;/a&gt; specified &lt;a href=&quot;https://google./search?q=%s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://google./search?q=%s&lt;/a&gt;, respectively, the request does not occur because the google.-erver not exist. Of course, I can fix the error manually on my version of the operating system, but I would like it to be fixed for all users in the update. This will improve the perception of the system.&lt;/p&gt;&#xA;" OwnerUserId="20532" LastActivityDate="2020-02-05T14:16:41.410" Title="Error setting up the address bar for Google search engine" Tags="|epiphany|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22310" PostTypeId="2" ParentId="20783" CreationDate="2020-02-04T10:49:38.847" Score="0" Body="&lt;p&gt;we have the same problem, this problem occurs when a locked system is running VLC (in my problem), here I include the log, to solve it i do truncate &lt;code&gt;sudo truncate -s 0 /var/lib/syslog&lt;/code&gt;, this is &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-435/+bug/1846374&quot; rel=&quot;nofollow noreferrer&quot;&gt;because of Nvidia Driver&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer attributes failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer rendering failure: An invalid handle value was provided.&#xA;[00007fb9d402a790] vdpau_chroma filter error: video mixer features failure: An invalid handle value was provided.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2020-03-20T18:55:02.663" LastActivityDate="2020-03-20T18:55:02.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22315" PostTypeId="1" CreationDate="2020-02-04T16:17:41.873" Score="1" ViewCount="75" Body="&lt;p&gt;For some reasons, the app center is no longer checking if my apps are up to date and it does not give me the automatic update as before. I am now back the old &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; but the automatic update was quite nice. Any idea why this stopped?&lt;/p&gt;&#xA;" OwnerUserId="19816" LastActivityDate="2020-02-04T16:17:41.873" Title="App Center not updating" Tags="|updates|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22318" PostTypeId="2" ParentId="22080" CreationDate="2020-02-04T20:51:48.853" Score="1" Body="&lt;p&gt;The first step in resolving these issues is to see if you can establish whether your system is CPU bound, I/O bound, or memory bound. This is just a fancy way of saying you have a bottleneck at the CPU, disk/network, or memory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install Gnome System Monitor from the AppCenter and when you start to notice the system is slowing down or freezing open it up and look at the Resources tab:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pKUsY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pKUsY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The top section represents the CPU load and if one or more of them are at or near 100% you probably have a CPU bottleneck. If this is the case look at the Processes tab, sort the table by the CPU column by clicking on it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4K6JF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4K6JF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The application(s) at the top of the table will most likely be the culprit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second section on the Resources tab is your memory, if the &quot;Memory&quot; line is maxed out and the &quot;Swap&quot; line is up off the floor then you probably have memory issues. You can go back to the Processes tab and sort the table by Memory:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q8l3V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q8l3V.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once again the apps at the top are typically the offenders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I/O bottlenecks typically are the result of downloading large files or web pages and result in browser tabs spinning and applications that use the internet stalling out but the rest of the UI should be reasonably responsive. This doesn't seem like the issue you are having so I won't go into a lot of detail though if you notice the lines in the last section of the Resources tab (Network History) are at the ceiling consistently when you experience a freeze you may have an I/O issue.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-04T20:51:48.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22320" PostTypeId="1" CreationDate="2020-02-05T08:40:23.863" Score="0" ViewCount="36" Body="&lt;p&gt;No tray icon for skype is visible. I mean on ubuntu it used to show a green icon whenever I'm online, yellow for away and red for busy.&lt;/p&gt;&#xA;" OwnerUserId="5181" LastActivityDate="2020-02-05T08:40:23.863" Title="Skype notification tray icon is not showing on the topbar" Tags="|wingpanel|skype|" AnswerCount="0" CommentCount="3" ClosedDate="2020-02-16T17:12:49.040" ContentLicense="CC BY-SA 4.0" />
  <row Id="22321" PostTypeId="1" CreationDate="2020-02-05T10:14:25.267" Score="0" ViewCount="429" Body="&lt;p&gt;My Elementary OS freezes and crashes on coping large files. I try &lt;a href=&quot;https://blog.realhe.ro/linux/when-copying-a-large-file-on-linux-transfer-hangs-at-the-end-and-you-want-to-fking-kill-someone/&quot; rel=&quot;nofollow noreferrer&quot;&gt;apply a fix&lt;/a&gt; I did find on Ubuntu forums: to change content of two files.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo $((48*1024*1024)) &amp;gt; /proc/sys/vm/dirty_bytes'&#xA;sudo sh -c 'echo $((16*1024*1024)) &amp;gt; /proc/sys/vm/dirty_background_bytes'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sadly after every single reboot, the contents of these two files resets. Which one is the right way to add the above command to the startup?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;create a startup script or&lt;/li&gt;&#xA;&lt;li&gt;add the below lines to an existing startup script? (which one is that?)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="20546" LastActivityDate="2020-03-07T04:08:55.930" Title="How to add to the startup script?" Tags="|crash|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22322" PostTypeId="2" ParentId="22321" CreationDate="2020-02-05T13:46:33.423" Score="1" Body="&lt;p&gt;Add them to the bottom of the .profile file in your home directory. In the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.code ~/.profile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Append the scripts, save, then reboot and you should be in business.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-05T13:46:33.423" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22323" PostTypeId="2" ParentId="22309" CreationDate="2020-02-05T14:16:41.410" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://gitlab.gnome.org/GNOME/epiphany/commit/db1b1c60d3167064c547ba9416a821ba4be641ee&quot; rel=&quot;nofollow noreferrer&quot;&gt;It is fixed in Epiphany 3.32.&lt;/a&gt; I don't know when elementary OS will update to a newer version of Epiphany.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2020-02-05T14:16:41.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22324" PostTypeId="1" AcceptedAnswerId="22330" CreationDate="2020-02-05T17:45:39.727" Score="0" ViewCount="138" Body="&lt;p&gt;When I see the screenshots on &lt;a href=&quot;https://github.com/elementary/code/blob/3.2.0/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github&lt;/a&gt; then I have to conclude that my code editor looks a bit different:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NXGdj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NXGdj.png&quot; alt=&quot;code editor&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Between the &quot;Open file&quot; button and the &quot;Save file&quot;-button in the left top corner of the image should appear the &quot;Project/folder&quot;-button. I can toggle the sidebar, but that is not useful without a project.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This code-editor came with elementary OS and I did not install it myself. Do I have to uninstall and install it again to get this functionality? Or do I need to install a plugin? &lt;/p&gt;&#xA;" OwnerUserId="9548" LastActivityDate="2020-02-06T08:23:50.350" Title="Code editor does not have a &quot;project/folder&quot; button" Tags="|code|editor|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22325" PostTypeId="1" AcceptedAnswerId="22346" CreationDate="2020-02-05T18:49:36.103" Score="0" ViewCount="42" Body="&lt;p&gt;Whenever I'm hovering to the topbar application menu or the notification tray it all shows blurry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3gmDp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3gmDp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5181" LastActivityDate="2020-02-07T09:09:11.643" Title="My top bar hover become blurry after changing theme" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22326" PostTypeId="1" AcceptedAnswerId="22327" CreationDate="2020-02-05T19:01:06.353" Score="0" ViewCount="766" Body="&lt;p&gt;There doesn't seem to be an installer offered on the website and I couldn't find any terminal instructions either.&lt;/p&gt;&#xA;" OwnerUserId="20550" LastActivityDate="2020-02-05T21:29:48.563" Title="Is there a way to install insync on elementary OS?" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22327" PostTypeId="2" ParentId="22326" CreationDate="2020-02-05T21:29:48.563" Score="1" Body="&lt;p&gt;Yes, they do supply a client &lt;a href=&quot;https://www.insynchq.com/downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;Downloads Insync&lt;/a&gt;. Click on the orange Download for Linux button, select Ubuntu 18.04 64bit and click on the Download button. After the download completes, use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; to open the downloaded file and install Insync.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can launch it from the Applications menu.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-02-05T21:29:48.563" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22328" PostTypeId="1" CreationDate="2020-02-06T01:17:35.690" Score="1" ViewCount="338" Body="&lt;p&gt;I’ve left the elementary OS on the install screen for 18&gt; hours now and it’s still stuck on the update-grub phase of the install. Did I do something wrong?&#xA;I just purchased the download and I thought it would be easy to install.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/zgdca.jpg&quot; alt=&quot;image of the lines&quot;&gt;&lt;/p&gt;&#xA;" OwnerUserId="20554" LastActivityDate="2020-02-06T01:17:35.690" Title="On the install screen, it says “Started Run anacron jobs”" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22329" PostTypeId="1" CreationDate="2020-02-06T04:34:05.307" Score="1" ViewCount="36" Body="&lt;p&gt;What should be the shasum for The Mac Hera iso. Mine doesn't match the sum in the instructions. I get: 190bbf738db0f15daa9ee4095bb64c307950082819081a969f8edd51f1faab07&lt;/p&gt;&#xA;" OwnerUserId="20555" LastActivityDate="2020-02-06T04:34:05.307" Title="What should be the shasum for The Mac Hera iso. Mine doesn't match the sum in the instructions" Tags="|release-hera|" AnswerCount="0" CommentCount="1" ClosedDate="2020-02-16T17:38:36.603" ContentLicense="CC BY-SA 4.0" />
  <row Id="22330" PostTypeId="2" ParentId="22324" CreationDate="2020-02-06T08:17:50.577" Score="1" Body="&lt;p&gt;Actually the &lt;code&gt;io.elementary.code&lt;/code&gt; works as expected. You just need to open a folder inside it which is called a &lt;code&gt;workspace/project&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Try the following command for &lt;strong&gt;elementary OS 5.1 Hera&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;io.elementary.code ~&lt;/code&gt;&lt;a href=&quot;https://i.stack.imgur.com/PPc0z.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PPc0z.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;So to answer your question&lt;/strong&gt; Look at the bottom left corner of the screenshot I attached. That's the open &lt;code&gt;Project button&lt;/code&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Note&lt;/h3&gt;&#xA;&lt;p&gt;Also, make sure the sidebar is turned on&lt;/p&gt;&#xA;" OwnerUserId="20459" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-02-06T08:23:50.350" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22331" PostTypeId="1" CreationDate="2020-02-06T08:48:34.957" Score="1" ViewCount="15" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sng4g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sng4g.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i already add the link by paste it but i cant save it&lt;/p&gt;&#xA;" OwnerUserId="20556" LastEditorUserId="15904" LastEditDate="2020-02-18T12:17:27.120" LastActivityDate="2020-02-18T12:17:27.120" Title="I cannot add the command line on my app editor app on elementary hera" Tags="|applications|release-hera|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22332" PostTypeId="1" CreationDate="2020-02-06T13:43:38.047" Score="1" ViewCount="178" Body="&lt;p&gt;The Slack app serves desktop notifications, but the Plank icon has no notification badges. Is there a way to fix it client-side?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running elementary OS 5.1 Hera. &lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2023-12-14T21:00:35.153" Title="Slack entry in dock has no notification badges" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22336" PostTypeId="1" CreationDate="2020-02-06T17:13:59.130" Score="1" ViewCount="14" Body="&lt;p&gt;I just downloaded the eOS iso today, booted it up, installed it, and it looks great at first. I then restart the computer and find that the system settings for primary button and natural scrolling no longer works despite the GUI clearly indicating that they've been changed. &lt;/p&gt;&#xA;" OwnerUserId="20560" LastActivityDate="2020-02-06T17:13:59.130" Title="Primary Buttons issue with fresh install of eOS Hera" Tags="|release-hera|mouse|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22338" PostTypeId="1" CreationDate="2020-02-06T20:29:05.457" Score="1" ViewCount="414" Body="&lt;p&gt;I'm trying to install Elementary OS for the first time, and I'm having trouble. The installation guide says that the hash next to &quot;SHA265&quot; in Rufus should match with the hash shown in the guide, but they don't for me. I've also tried downloading the file through the magnet link, but it keeps doing the same thing. What's going on here? If it matters, the PC I'm trying to install it on is running windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="20563" LastActivityDate="2020-02-11T23:12:46.177" Title="Hash next to &quot;SHA265&quot; doesn't match up" Tags="|system-installation|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22339" PostTypeId="2" ParentId="7987" CreationDate="2020-02-06T21:12:25.773" Score="4" Body="&lt;p&gt;For the new version elementary 5.1 Hera the correct command to launch a termianl is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.terminal -n &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="969" LastActivityDate="2020-02-06T21:12:25.773" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22340" PostTypeId="2" ParentId="22338" CreationDate="2020-02-06T23:13:04.170" Score="2" Body="&lt;p&gt;The sha256sum in the Installation page is for &lt;code&gt;elementaryos-5.1-stable.20191202.iso&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you go ahead and download the new iso file, you'll get &lt;code&gt;elementaryos-5.1-stable.20200204.iso&lt;/code&gt;, an updated one. My guess is the Installation page has not been updated yet with the new checksum. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the new iso file, I get&lt;br&gt;&#xA;&lt;code&gt;190bbf738db0f15daa9ee4095bb64c307950082819081a969f8edd51f1faab07&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-02-06T23:13:04.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22341" PostTypeId="1" CreationDate="2020-02-07T01:19:09.960" Score="0" ViewCount="46" Body="&lt;p&gt;After the update, access to my previous disks was disabled. and now I don't write these partitions. how to fix this error and how to write my disk partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DkzOy.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DkzOy.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nDA4j.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nDA4j.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20444" LastEditorUserId="20444" LastEditDate="2020-02-07T02:03:45.380" LastActivityDate="2024-02-17T04:05:35.757" Title="I don't write my partitions please help me" Tags="|disk-management|full-disk-encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22342" PostTypeId="1" CreationDate="2020-02-07T03:29:38.257" Score="1" ViewCount="451" Body="&lt;p&gt;Whenever I install elementary, the bluetooth is for some reason 'soft blocked' out of the box. This is usually remedied by running &lt;code&gt;sudo rfkill unblock bluetooth&lt;/code&gt;. Unfortunately, after my recent install, I now have to repeat this after every reboot. I am not sure why this is the case, but as you can imagine, it is a real pain. Any guidance would be much appreciated since I frequently use a bluetooth headset and keyboard.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks folks.&lt;/p&gt;&#xA;" OwnerUserId="4899" LastActivityDate="2024-02-16T16:04:55.623" Title="Bluetooth is soft blocked after every restart" Tags="|settings|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22343" PostTypeId="2" ParentId="22338" CreationDate="2020-02-07T04:52:35.433" Score="2" Body="&lt;p&gt;I had the same problem on Linux (xubuntu). However, for me, the checksum matches the one in the website's repo &lt;a href=&quot;https://github.com/elementary/website/blob/master/docs/installation.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20566" LastActivityDate="2020-02-07T04:52:35.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22345" PostTypeId="2" ParentId="22342" CreationDate="2020-02-07T08:56:01.693" Score="0" Body="&lt;p&gt;I had the same problem years ago on Loki, below are the steps I did to resolve the problem explained &lt;a href=&quot;https://elementaryos.stackexchange.com/a/15333/12483&quot;&gt;here in stackExchange&lt;/a&gt;. Before asking a question I highly &lt;strong&gt;recommed to use the search&lt;/strong&gt; to see if there is already somewhere here an answer and if the answers here do not work, then ask the question and notice that this, this or that do not work for you. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First I recommend you to try only point 1 of the list below and if it is not enough to try the others also.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1&lt;/strong&gt; unblocking solution I found &lt;a href=&quot;https://askubuntu.com/questions/688090/cannot-unblock-soft-blocked-bluetooth&quot;&gt;there&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill unblock bluetooth&#xA;systemctl enable bluetooth.service&#xA;systemctl start bluetooth.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;2&lt;/strong&gt; the solution for the bluetooth audio from &lt;a href=&quot;https://askubuntu.com/questions/634382/bluetooth-speaker-pairs-but-wont-connect&quot;&gt;this link&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install pulseaudio-module-bluetooth&#xA;pactl load-module module-bluetooth-discover&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;3&lt;/strong&gt; try deleting/removing the device from bluetooth devices and pair it again.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-02-07T08:56:01.693" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22346" PostTypeId="2" ParentId="22325" CreationDate="2020-02-07T09:09:11.643" Score="0" Body="&lt;p&gt;Not all of the themes you can find online support elementary OS also not all of the  ones that support the eOS are written well - so if there is no problem with the default elementary theme, usualy the reason is that the theme you use is not good for elementary OS. In this case you can address the issue to the theme developper or change the theme with a compatible one. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-02-07T09:09:11.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22347" PostTypeId="1" CreationDate="2020-02-07T09:27:31.567" Score="0" ViewCount="57" Body="&lt;p&gt;After installing grass gis in elementary OS 5.1 the item in the application menu does not work. The application can be started from the terminal but its appearance is anomalous with an annoying duplicate transparent window that should not be present (The application starts correctly in Ubuntu 18.04 Gnome and Linux Mint 13.3 Cinnamon).&lt;br&gt;&#xA;This is the .desktop file present in / usr / share / applications:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=GRASS GIS 7&#xA;GenericName=Geographic Information System&#xA;GenericName[ar]=نظام المعلومات الجغرافي&#xA;GenericName[az]=Coğrafi informasiya sistemi&#xA;GenericName[bg]=Географска информационна система&#xA;GenericName[bs]=Geografski informacioni sistem&#xA;GenericName[ca]=Sistema d'informació geogràfica&#xA;GenericName[cs]=Geografický Informační Systém&#xA;GenericName[de]=Geographisches Informationssystem&#xA;GenericName[el]=Σύστημα Γεωγραφικών Πληροφοριών&#xA;GenericName[es]=Sistema de Información Geográfica&#xA;GenericName[et]=Geoinfosüsteem&#xA;GenericName[eu]=Geografia-informazioko sistemen&#xA;GenericName[fa]=سامانه اطلاعات مکانی&#xA;GenericName[fi]=Maantieteellinen Tietojärjestelmä&#xA;GenericName[fr]=Système d'Information Géographique&#xA;GenericName[gl]=Sistema de información xeográfica&#xA;GenericName[he]=מערכת מידע גאוגרפית&#xA;GenericName[hi]=भूगोलीय_सूचना_प्रणाली&#xA;GenericName[hr]=Geografski informacijski sustav&#xA;GenericName[hu]=Földrajzi információs rendszer&#xA;GenericName[hy]=Աշխարհագրական տեղեկատվական համակարգ&#xA;GenericName[id]=Sistem informasi geografis&#xA;GenericName[is]=Landfræðilegt upplýsingakerfi&#xA;GenericName[it]=Sistema Informativo Geografico&#xA;GenericName[ka]=გეოინფორმაციული სისტემა&#xA;GenericName[lt]=Geografinė informacinė sistema&#xA;GenericName[lv]=Ģeogrāfiskā informācijas sistēma&#xA;GenericName[mk]=Географски информационен систем&#xA;GenericName[ml]=ജി.ഐ.എസ്.&#xA;GenericName[nl]=Geografisch informatiesysteem&#xA;GenericName[nn]=Geografiske informasjonssystem&#xA;GenericName[no]=Geografiske informasjonssystemer&#xA;GenericName[pl]=System Informacji Geograficznej&#xA;GenericName[pt]=Sistema de Informação Geográfica&#xA;GenericName[ro]=Sistem Informatic Geografic&#xA;GenericName[ru]=Геоинформационная система&#xA;GenericName[sh]=Geografski informacijski sistem&#xA;GenericName[sk]=Geografický informačný systém&#xA;GenericName[sl]=Geografski informacijski sistem&#xA;GenericName[sr]=Географски информациони систем&#xA;GenericName[sv]=Geografiskt Informationssystem&#xA;GenericName[th]=ระบบสารสนเทศภูมิศาสตร์&#xA;GenericName[tr]=Coğrafi bilgi sistemi&#xA;GenericName[uk]=Геоінформаційна система&#xA;GenericName[uz]=Geografik axborot tizimi&#xA;Icon=grass&#xA;TryExec=/usr/bin/grass74&#xA;Exec=grass74&#xA;Terminal=true&#xA;Keywords=gis;spatial;geospatial;database;remote sensing;hydrology;vector;raster;visualization;maps;wms;wfs;ogc;osgeo;&#xA;Categories=Education;Science;Geoscience;Geography;  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but I was unable to find anomalies or errors.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EmCFr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EmCFr.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;These are the files in / usr / bin involved in starting the application:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mqx9V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mqx9V.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20324" LastActivityDate="2020-02-12T20:42:13.603" Title="Problem starting GRASS GIS in elementary OS 5.1" Tags="|slingshot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22348" PostTypeId="1" CreationDate="2020-02-07T09:58:44.617" Score="1" ViewCount="132" Body="&lt;p&gt;Just migrated from ubuntu 19.04 to elementary and loving it!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One major problem with keyboard shortcuts on elementary is that to set a shortcut for say MUTE (icon listed on F6 Key) i have to use a keyboard combination in settings: Ex - Super + F6. simply pressing f6 to setup a shortcut for mute doesn't work - says - disabled.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is something that works very well in Ubuntu! (and might force me to move back)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help!&lt;/p&gt;&#xA;" OwnerUserId="20473" LastActivityDate="2024-02-18T16:03:20.413" Title="Keyboard Shortcuts: Set F1-F12 as shortcut without key combination" Tags="|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22349" PostTypeId="2" ParentId="22338" CreationDate="2020-02-07T12:32:04.067" Score="0" Body="&lt;p&gt;I got this see if it matches, dude!&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JCGCF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JCGCF.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20570" LastActivityDate="2020-02-07T12:32:04.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22352" PostTypeId="1" CreationDate="2020-02-07T15:32:23.727" Score="1" ViewCount="189" Body="&lt;p&gt;I was hoping the updated hardware stack was going to increase my odds of success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Aside from some network issues (detects speed and duplex wrong)and some sleep issues, the same thumb drive installed and runs pretty much fine on my Intel box.  Assuming I may need a newer kernel on the install thumb drive? I've seen methods of updating it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thoughts?&lt;/p&gt;&#xA;" OwnerUserId="20574" LastActivityDate="2024-02-18T14:01:55.253" Title="Installer not booting on my Ryzen (3 3200G) system" Tags="|system-installation|amd|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22353" PostTypeId="2" ParentId="22352" CreationDate="2020-02-07T16:02:22.750" Score="0" Body="&lt;p&gt;Did you try with the newest released ISO with the 5.1.1 update? It includes a very recent kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm running eOS (and Manjaro) on my main PC (gaming) with a Ryzen 3600, and being doing that for a few months now, so I know it's not a CPU thing. Also, the 3200G includes Ryzen+ arch (not Ryzen2) which makes it even more compatible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure you re-download the ISO and try again with the latest and greatest.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-07T16:02:22.750" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22354" PostTypeId="2" ParentId="22341" CreationDate="2020-02-07T19:13:27.857" Score="0" Body="&lt;p&gt;Looks like they are mounted as read-only or you (the user) don't have enough privileges to write on those. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try one easy thing first: Hit the 'eject' button next to the partition you are trying to write on. If it allows you to do it (un-mount it) then click on it again to re-mount it and try to write to it again. It might ask for your 'sudo' password to perform that operation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that fails, umount-them manually from a command line:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Go to a terminal&lt;/li&gt;&#xA;&lt;li&gt;Type 'df -h' to see the mounted partitions &lt;/li&gt;&#xA;&lt;li&gt;identify the one you want to un-mount (example /dev/sdb2 with a mount path of /run/media/user/234234234/Part_Label).&lt;/li&gt;&#xA;&lt;li&gt;run 'sudo umount /dev/sdb2'&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;If that works, go to the file manager and click on the partition so it mounts it again with your username. That might do the trick for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;best,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-07T19:13:27.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22355" PostTypeId="2" ParentId="22347" CreationDate="2020-02-07T21:10:23.567" Score="1" Body="&lt;p&gt;Try this:&#xA;From a terminal 'GTK_CSD=0 grass74' when launching the app. Please do it and report back if it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-07T21:10:23.567" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="22356" PostTypeId="1" CreationDate="2020-02-07T23:48:02.603" Score="1" ViewCount="68" Body="&lt;p&gt;After installing Elementary OS, there was no wifi adapter. I followed &lt;a href=&quot;https://elementary-os-solutions.blogspot.com/2019/01/wifi-not-working-in-elementary-os-juno.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;these instructions&lt;/a&gt; and it worked, however, my wifi was extremely slow compared to other devices using the same network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The fix for this problem was:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo modprobe -r rtl8723de &amp;amp;&amp;amp; sleep 5 &amp;amp;&amp;amp; sudo modprobe rtl8723de ant_sel=2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After running that command, my wifi becomes normal again, however, the fix is not permanent. Every time I boot up the PC, I need to run that command to not have slow wifi. I would like to make this solution permanent.&lt;/p&gt;&#xA;" OwnerUserId="20577" LastActivityDate="2020-02-07T23:48:02.603" Title="Slow Wifi, want to make fix permanent" Tags="|release-juno|wifi|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22358" PostTypeId="1" CreationDate="2020-02-08T01:13:34.130" Score="1" ViewCount="60" Body="&lt;p&gt;I'm an elementary OS 5.1 user, and I self-host a few different applications including Jellyfin and Nextcloud on another Linux machine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Because I didn't want to have to use a different endpoint URL for these applications at home than I do in public, in addition to a public DNS record with my domain registrar, I created a duplicate sort of DNS entry at home with my local DNS server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;jellyfin.example.com resolves to 192.168.1.101 when using local DNS server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;jellyfin.example.com resolves to 75.74.73.72 when using public DNS server.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My issue is that when I first connect to my home network, it is resolved locally as I expect. After about 15 minutes or so, it switches to being resolved publicly, which then cuts off my ability to access using the fully-qualified domain name. It continuously switches back and forth every few minutes. As of right now, I have no clue why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I tell elementary OS to use the local DNS server when I'm at home, and the public DNS server otherwise?&lt;/p&gt;&#xA;" OwnerUserId="20578" LastActivityDate="2020-02-08T01:13:34.130" Title="Prioritizing home DNS over public DNS?" Tags="|networking|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22359" PostTypeId="2" ParentId="14901" CreationDate="2020-02-08T02:15:43.517" Score="1" Body="&lt;p&gt;Don't know why eOS doesn't include a screensaver, but personally, I've never used them. They were designed to prevent burn-in on older monitors, so they're now obsolete. More importantly, I always felt that turning off the display was more practical as it prevented burn-in (on older monitors) and saved power.&lt;/p&gt;&#xA;" OwnerUserId="20580" LastActivityDate="2020-02-08T02:15:43.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22361" PostTypeId="1" CreationDate="2020-02-08T06:45:13.987" Score="1" ViewCount="79" Body="&lt;p&gt;Here's the situation at hand. I am dual booting Elementary OS with Windows 10. After some initial troubleshooting I got it to work. Initially I followed a tutorial to help me out with the partitioning, as I did not want to mess up my hard drive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As of right now, it says my File System or / is 1.2GB free of 7.8 GB. And then it lists my 18GB Volume. However when I check in that volume all that is listed is directory with the name of my user profile. What can I do to fix this. I am assuming every time I install a package its going to consume space under my / partition and I will eventually run out of useable storage. &lt;/p&gt;&#xA;" OwnerUserId="20582" LastActivityDate="2024-02-19T19:03:10.327" Title="/ partition is almost full but have 18GB unused volume" Tags="|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22362" PostTypeId="1" CreationDate="2020-02-08T07:08:38.813" Score="1" ViewCount="163" Body="&lt;p&gt;When I try to update elementary OS it gives me this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: GPG error: http://us.archive.ubuntu.com/ubuntu precise-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5&#xA;E: The repository 'http://us.archive.ubuntu.com/ubuntu precise-backports InRelease' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: GPG error: http://us.archive.ubuntu.com/ubuntu precise Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5&#xA;E: The repository 'http://us.archive.ubuntu.com/ubuntu precise Release' is not signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20583" LastEditorUserId="16827" LastEditDate="2020-02-16T18:05:07.030" LastActivityDate="2024-02-26T16:05:30.623" Title="Update Error Elementary Os Hera" Tags="|updates|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22363" PostTypeId="1" CreationDate="2020-02-08T07:47:25.867" Score="1" ViewCount="65" Body="&lt;p&gt;I downloaded the image just for a testing purpose and was wondering, if the mentioned sha256sum cd66c32d53eab6f789b8e69e499305b7af0c9b3083ed54d50b111136d2795ea1 on your installation page is correct?&#xA;I downloaded the image twice and got both times the same sha256sum 190bbf738db0f15daa9ee4095bb64c307950082819081a969f8edd51f1faab07.&#xA;Now I am a little bit in doubt if I can test elementary OS with my same copy or if I got a tampered and therfore untrusted ISO file&#xA;Can you please have a check if the sha256sum on your documentation page is right?&lt;/p&gt;&#xA;" OwnerUserId="20584" LastActivityDate="2020-02-08T07:47:25.867" Title="sha256sum elementaryos-5.1-stable.20200204.iso correct?" Tags="|system-installation|download|" AnswerCount="0" CommentCount="0" ClosedDate="2020-02-16T17:38:53.697" ContentLicense="CC BY-SA 4.0" />
  <row Id="22364" PostTypeId="1" CreationDate="2020-02-08T10:31:51.370" Score="1" ViewCount="20" Body="&lt;p&gt;i am trying to install Elementary OS on a usb stick and i'm having several problems:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - First of all, the installation process takes several hours to complete (around 6-7 hours). I don't think is a matter of the USB stick because i have a 3.0 Kingston Data Traveler stick, which should be good enough for a good writing performance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - Even if the installation ends with success, elementary stucks on the splash screen after the boot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using a Dell Inspiron 5370 with 8GB Ram, Windows OS version is 1903.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am newbie in the Linux world, so i don't know if i gave sufficient informations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for help :)&lt;/p&gt;&#xA;" OwnerUserId="20585" LastActivityDate="2020-02-08T10:31:51.370" Title="Errors installation on USB" Tags="|usb|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22367" PostTypeId="1" CreationDate="2020-02-08T13:08:47.020" Score="1" ViewCount="9" Body="&lt;p&gt;Obvioulsy it's convenient to have so many choices of system languages, but to my surprise, Elementary had &lt;strong&gt;changed its system language by itself&lt;/strong&gt; when I logged in today.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;How is that possible? &lt;/li&gt;&#xA;&lt;li&gt;How do I stop it from happening again? &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="20588" LastActivityDate="2020-02-08T13:08:47.020" Title="System language changed without volition" Tags="|system|language|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22371" PostTypeId="1" CreationDate="2020-02-09T02:54:27.300" Score="0" ViewCount="406" Body="&lt;p&gt;Al intentar instalar el App Center en Elementary OS, tengo un error, el cual es:sudo apt install appcenter&#xA;Leyendo lista de paquetes... Hecho&#xA;Creando árbol de dependencias&lt;br&gt;&#xA;Leyendo la información de estado... Hecho&#xA;No se pudieron instalar algunos paquetes. Esto puede significar que&#xA;usted pidió una situación imposible o, si está usando la distribución&#xA;inestable, que algunos paquetes necesarios aún no se han creado o se&#xA;han sacado de «Incoming».&#xA;La siguiente información puede ayudar a resolver la situación:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Los siguientes paquetes tienen dependencias incumplidas:&#xA; appcenter : Depende: appstream (&gt;= 0.12) pero no es instalable&#xA;             Depende: apt-config-icons pero no es instalable&#xA;             Depende: apt-config-icons-hidpi pero no es instalable&#xA;             Depende: apt-config-icons-large pero no es instalable&#xA;             Depende: apt-config-icons-large-hidpi pero no es instalable&#xA;             Depende: packagekit pero no es instalable&#xA;             Depende: libappstream4 (&gt;= 0.11.0) pero no es instalable&#xA;E: No se pudieron corregir los problemas, usted ha retenido paquetes rotos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Si alguien tiene alguna solucion, porfavor.&#xA;y Muchas Gracias.&lt;/p&gt;&#xA;" OwnerUserId="20530" LastActivityDate="2024-02-16T10:02:05.270" Title="Tengo un problemas al instalar el appcenter en elementary os 5.1 Hera" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22372" PostTypeId="1" CreationDate="2020-02-09T05:25:00.067" Score="1" ViewCount="14" Body="&lt;p&gt;I have a persistent USB running with elemntary OS 5.1 hera, and have been struggling with trying to connect a second monitor to my laptop, Ive got it to the point where it shows the wallpaper on the second monitor and has the mouse moving but I cant get any windows open on it or drag any windows to it.&lt;/p&gt;&#xA;" OwnerUserId="20596" LastActivityDate="2020-02-09T05:25:00.067" Title="Problems with Second monitor with persistent usb of elmentary OS 5.1 hera" Tags="|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22373" PostTypeId="1" AcceptedAnswerId="25627" CreationDate="2020-02-09T05:39:00.853" Score="0" ViewCount="69" Body="&lt;p&gt;I installed caja because &quot;Files&quot; is not working so well and I might file a bug.  But I also like its image reducer plugin.  I installed it, but it does not show up in the app finder.  I can launch it via terminal.  How to fix this?&lt;/p&gt;&#xA;" OwnerUserId="8319" LastEditorUserId="8517" LastEditDate="2020-09-07T14:07:50.087" LastActivityDate="2020-10-06T11:39:39.630" Title="How to run caja without terminal?" Tags="|applications|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22374" PostTypeId="1" CreationDate="2020-02-09T07:49:44.920" Score="1" ViewCount="28" Body="&lt;p&gt;After creating a non-admin user, I could no longer change admin user's password.  Had to login to non-admin user's account and change admin from there, after entering admin password.  Definite bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recreate: Create non-admin account, try to change admin account password.&#xA;Next: Login to non-admin account, authenticate to change admin account, easily change password for admin account.&lt;/p&gt;&#xA;" OwnerUserId="20597" LastActivityDate="2023-12-24T17:04:20.510" Title="Need to fix user accounts" Tags="|release-hera|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22375" PostTypeId="2" ParentId="22348" CreationDate="2020-02-09T09:45:49.557" Score="0" Body="&lt;p&gt;Sorted by installing Dconf-editor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All the custom keyboard shortcuts settings are stored in the dconf database.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can easily access them with dconf-editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get install dconf-editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then go to the following dconf path in the editor:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/org/gnome/settings-daemon/plugins/media-keys/custom-keybindings/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and change manually!&lt;/p&gt;&#xA;" OwnerUserId="20473" LastActivityDate="2020-02-09T09:45:49.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22381" PostTypeId="1" CreationDate="2020-02-09T23:41:08.203" Score="1" ViewCount="64" Body="&lt;p&gt;I recently installed 5.1 and now 5.1.2 has come out, I keep the updates up to date, but in the section about, I still get 5.1, how do I know that I have updated to 5.1.2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you. Greetings.&lt;/p&gt;&#xA;" OwnerUserId="20605" LastActivityDate="2020-02-10T23:18:39.047" Title="How to know what I am using Hera 5.1.2?" Tags="|system|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22382" PostTypeId="1" AcceptedAnswerId="22414" CreationDate="2020-02-10T00:14:13.920" Score="1" ViewCount="413" Body="&lt;p&gt;I am new to eOS and really dig it.  I noticed that my workstation (out of the box eOS) cannot resolve hosts on my lan.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a small DNS Domain (lan.local) which I use to manage local machines like&lt;/p&gt;&#xA;&#xA;&lt;p&gt;icemaker.lan.local&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed that while my host can resolve Internet Domains, when I try to ping icemaker.lan.local the can't be resolved.  Previous to this install, I was using Fedora workstation and DNS worked as expected &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;SystemD failed at DNS configration :(&lt;/p&gt;&#xA;" OwnerUserId="20603" LastEditorUserId="3018" LastEditDate="2020-02-15T14:53:08.103" LastActivityDate="2020-02-15T14:53:08.103" Title="DNS resolution to the local lan" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22383" PostTypeId="2" ParentId="22381" CreationDate="2020-02-10T00:16:40.333" Score="0" Body="&lt;p&gt;I just figured this out recently.  Hope this helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Win+Space&#xA;Type&quot;  About&quot;&#xA;Select the About icon&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The version of eOS you are using will appear on the left under the logo.&lt;/p&gt;&#xA;" OwnerUserId="20603" LastActivityDate="2020-02-10T00:16:40.333" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22385" PostTypeId="1" CreationDate="2020-02-10T02:57:49.220" Score="1" ViewCount="18" Body="&lt;p&gt;I have a dual boot and as you can see in this &lt;a href=&quot;https://i.stack.imgur.com/aB8uc.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;video&lt;/a&gt;,  it flashes between the pc logo(HP) and elementary logo, I have just installed Hera and this wasn't a problem before on juno.&#xA;Does anyone have this problem or knows where I could report it(I couldn't find the corresponding repo on GitHub)?  &lt;/p&gt;&#xA;" OwnerUserId="20607" LastActivityDate="2020-02-10T02:57:49.220" Title="Odd boot logo flash" Tags="|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22386" PostTypeId="1" CreationDate="2020-02-10T09:45:32.077" Score="1" ViewCount="94" Body="&lt;h2&gt;MY SITUATION&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Recently I decided I wanted to change OS my Samsung NP270E5E, as Windows 10 was getting considerably slow and stuttery and I need it to be smooth enough to let me work without hiccups.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As I had a bit of former experience with Linux, and as of right now I don't need big programs like Photoshop and similar, I opted for a ligth distro like Kubuntu, then Lubuntu, then Zorin OS and now Elementary OS. Why did I go through so many? Because on every and each one of the, I had the same exact problem and I couldn't manage to find a fix.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TL;DR&#xA;Laptop: Samsung NP270E5E&#xA;OS: Elementary OS 5.1 Hera&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;THE PROBLEM&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;My wireless (wlan) card is not connecting to the internet. I have a Qualcomm Atheros AR9485 that runs on the ath9k driver.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill list&#xA;0: phy0: Wireless LAN&#xA;    Soft blocked: no&#xA;    Hard blocked: yes&#xA;1: hci0: Bluetooth&#xA;    Soft blocked: no&#xA;    Hard blocked: no&#xA;&#xA;lspci -v&#xA;02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)&#xA;Subsystem: Samsung Electronics Co Ltd AR9485 Wireless Network Adapter&#xA;Flags: bus master, fast devsel, latency 0, IRQ 16&#xA;Memory at f1500000 (64-bit, non-prefetchable) [size=512K]&#xA;Expansion ROM at f1580000 [disabled] [size=64K]&#xA;Capabilities: &amp;lt;access denied&amp;gt;&#xA;Kernel driver in use: ath9k&#xA;Kernel modules: ath9k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The thing is that &lt;strong&gt;wireless WORKS when I use the Live Media on my bootable USB stick&lt;/strong&gt; (which I'm using rn to post this) and it goes flawlessy. Also, if I REBOOT from the live-media into my installed version of eOS (click restart, wait for the usb to being inactive, plug off the usb, the system boots into the hd) WiFi WORKS|&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Same thing if I INSTALL any distro, it reboots and on the first session WIFi works, and if I keep rebooting it keeps working. (I noticed this because I've done it so many times).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;The problem occurs when I shut down the machine to boot it back up. In that case, the card is disabled.&lt;/em&gt; (rfkill shows hard block for phy0, which is not hard blocked on the live media). When it is in this state, I have no way to turn it back up as the Fn-key combination for the hardware switch does not respond. (Which it does on the live-media). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I noticed that a behaviour connected to the WiFi working or not is the fact that congruently with the WiFi I can also turn it ON and OFF with my hardware switch (Fn+F12), which DOES NOT work when WiFi is disabled. (Same thing for brightness up and down)&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;WHAT I'VE ALREADY DONE&lt;/h2&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Tried different distros&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;blacklisted acer_wmi: it did not work but on&#xA;ONE boot-up after this WiFi seemed to work. I shut it down again to&#xA;verify and boot it back up and it wasn't working again. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Updated eOs&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;As I noticed the problem might be related to the fact that I CANNOT&#xA;turn the hardware switch on and off, I tried looking for the module&#xA;on the live media that was handling this task. I found that on the&#xA;live media a certain mxm_wmi was present that wasn't on the hd. Tried&#xA;to modprobe that but didn't work. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Same thing for nouveau because I&#xA;had installed nVidia drivers, I removed them and I tried to use&#xA;nouveau instead but it didn't work. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I reset BIOS in every way&#xA;possible. (Load default settings, CMOS removal)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;h2&gt;NOTES&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;On the live-media, there is a module called &lt;em&gt;sparse_keymap&lt;/em&gt;, or something similar. Is that related to the Fn-key binding process?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WiFi card doesn't seem to have problems, as it works fine when it does. It looks like it's a software problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've had problems with my BIOS. I can't get into it by pressing F2 (which is the key that Samsung states for this model), nor with other keys. Trust me I tried everything I could find on the internet. The only way I can get into it is by changing boot order through efibootmgr. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I accidentally deleted the entry for the Hard Drive so when I boot into BIOS I can only see entries for USB, CD ROM and RECOVERY (and BOOT MENU). That's not an issue because it does boot into the operating system (as I set it up correctly on efibootmgr). But still, it's a bit messed up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I really hope you can help me with this, I'd like to be able to use my pc without having to keep a USB stick in all the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. If you need me to, I can post terminal outputs from both the working version (live-media) and the non-working one (hard-drive) to see the differences.&lt;/p&gt;&#xA;" OwnerUserId="20609" LastActivityDate="2020-02-10T09:45:32.077" Title="Atheros AR9485 works ONLY on live-media" Tags="|settings|wifi|networking|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22387" PostTypeId="2" ParentId="22381" CreationDate="2020-02-10T09:46:14.410" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0LzT2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0LzT2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hi. If that section is where I commented, but there is only 5.1, so I see it strange, I should put 5.1.2, right ?.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings.&lt;/p&gt;&#xA;" OwnerUserId="20605" LastActivityDate="2020-02-10T09:46:14.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22389" PostTypeId="2" ParentId="22123" CreationDate="2020-02-10T12:45:57.167" Score="0" Body="&lt;p&gt;this happens to me too, but I do not understand the solution well, are you saying that you have to uninstall the elementary-tweaks package ?, because removing said package you do not have the option to minimize.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings.&lt;/p&gt;&#xA;" OwnerUserId="20605" LastActivityDate="2020-02-10T12:45:57.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22390" PostTypeId="1" AcceptedAnswerId="22406" CreationDate="2020-02-10T12:52:57.377" Score="1" ViewCount="56" Body="&lt;p&gt;Some time ago a breadcrumbs path bar in all &lt;strong&gt;file dialogs&lt;/strong&gt; in Pantheon (like “Open“ or “Save” dialog) stopped working. It displays a current folder right, but when I try to click on it to move, for example, one folder up, it &lt;em&gt;always&lt;/em&gt; throws me into my home folder, no matter what folder I click. “←” and “→” works fine, but breadcrumbs not, so I can't go to parent folder and I forced to click all my way from home folder every time. Any suggestions how can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="20610" LastActivityDate="2020-02-11T10:06:04.237" Title="Breadcrumbs bar in file dialog not working" Tags="|pantheon-files|gtk|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22391" PostTypeId="2" ParentId="22361" CreationDate="2020-02-10T13:38:38.473" Score="0" Body="&lt;h1&gt;Preface&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Maybe you have separate partition for your “/home” folder? What tutorial have you followed?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that solutions that uses command line are not appreciated here, but the AFAIK fastest way to check all free space on your dirives is to open the Terminal and type this command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;df -H&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;For example, on my machine output looks like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0jdGc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0jdGc.png&quot; alt=&quot;Screenshot of my “df -H” output with marks and labels&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It clearly shows that I have my &lt;code&gt;/home/&lt;/code&gt; folder on a separate disk partition. I have 21 Gb of free space on the root partition, and 40 Gb on the home one.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;Solutions&lt;/h1&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You can manage your partitions with handy tools like “&lt;a href=&quot;https://gparted.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GParted&lt;/a&gt;” (install it from the AppCenter). With it you can resize the partitions: shrink the home one and enlarge the root one. But use it with care, because it can damage your data if misused. Double-check all your actions before clicking “Apply” button.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If you really just want to use one disk partition for all, the easiest way is to backup your home folder and reinstall elementary. In theory it's possible to modify the system to get rid of separate home partition, but it's tricky way.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Personally, I think that using separate partition for your home folder is a good practice, because if you'll someday need to reistall or upgrade your OS you'll need to format a root partition. In that case you'll need backup your home folder, or just store it on a separate partition. My home folder is safe on it's separate partition since elementary 0.2 Luna ️.&lt;/p&gt;&#xA;" OwnerUserId="20610" LastActivityDate="2020-02-10T13:38:38.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22392" PostTypeId="1" CreationDate="2020-02-10T13:43:00.743" Score="0" ViewCount="125" Body="&lt;p&gt;How to change default “sort by” to “type”?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to change in all subfolders.&#xA;I use ubuntu with pantheon theme, default isn't nautilus.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="20613" LastActivityDate="2024-02-20T15:08:56.193" Title="How to change default “sort by” to “type”" Tags="|pantheon-files|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22393" PostTypeId="1" CreationDate="2020-02-10T15:06:57.590" Score="1" ViewCount="377" Body="&lt;p&gt;I have a late 2011 MacBook Pro which has been running Snow Leopard without a hitch for several years.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried previously to boot from USB on this MacBook, with no success, and I had the impression that these older Macs won't boot from USB. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being the case, I decided to try installing elementaryos-5.1-stable.20200204.iso by burning it to a DVD. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Upon booting (holding down option key), the install disk came up (as &quot;windows&quot;) and I selected it, it ran and said (something like) &quot;running elementary OS&quot; for a few seconds, and appeared to be booting up ok. I went to make coffee and came back about 10 minutes later, the screen was black and nothing seemed to be going on. I waited around 40 minutes, no change. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I powered off and restarted the machine, to find that, while the LED on the front illuminates and there is some whirring from the HDD, there is no Apple &quot;DAH&quot; POST sound and the screen is black and inert. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried all the various resetting key combinations, to no avail, the screen is blank. Shining a bright light through the apple logo, there is no prompt or login icon visible. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone have a clue for me? I've looked at the thread &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/8177/black-screen-when-installing-os#new-answer?newreg=fc5310e52c6145bbac8f1d69c91d475b&quot;&gt;here&lt;/a&gt; and, while it sounds superficially similar, the experiences of other participants seem to include getting to the Mac boot screen, whereas I am not getting anything up on screen at all. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;TIA, Steve.&lt;/p&gt;&#xA;" OwnerUserId="20614" LastActivityDate="2024-02-21T21:00:40.070" Title="Black screen of death after trying to run elementary OS on 2011 MacBook Pro" Tags="|system-installation|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22395" PostTypeId="1" CreationDate="2020-02-10T18:38:20.330" Score="0" ViewCount="44" Body="&lt;p&gt;I followed some guidance here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13969/screen-mess-up-vmware-workstation-on-elementary-os&quot;&gt;Screen mess up - VMware Workstation on Elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to change the vmware workstation.desktop file to fix an issue i had&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now the app disappeared from the application list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="20618" LastActivityDate="2024-02-21T01:01:50.273" Title="Applications list and vmware workstation" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22396" PostTypeId="1" CreationDate="2020-02-10T19:13:51.480" Score="0" ViewCount="60" Body="&lt;p&gt;I can launch pdf's in Adobe Acrobat Reader from Nautilus (Files) with a single click having set the default application in Pantheon.  However in Pantheon itself I get an error &quot;Could not open files or URLs with this app&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Acrobat launches normally otherwise including from the Firefox downloads drop down menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to fix this as a symbolic link?  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="10449" LastActivityDate="2020-02-14T20:47:20.503" Title="Launch Adobe reader from Pantheon?" Tags="|app-shortcuts|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22397" PostTypeId="2" ParentId="22381" CreationDate="2020-02-10T21:31:04.613" Score="1" Body="&lt;p&gt;Yes, you found what there is to find. Whether you look in System Settings &gt; About, or through the command line in Terminal with &lt;code&gt;lsb_release -a&lt;/code&gt;, the most you will see is the major and minor release numbers. In this case, 5.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The final number is used by the elementary team, but it doesn't display within the operating system. So long as you install the available updates through AppCenter, you are up-to-date.&lt;/p&gt;&#xA;" OwnerUserId="17455" LastActivityDate="2020-02-10T21:31:04.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22398" PostTypeId="1" CreationDate="2020-02-10T23:04:25.387" Score="1" ViewCount="61" Body="&lt;p&gt;Recently I have tested many many Linux distros, and I must say to me Elementary seems to be the best in all aspects. I would love to use it, but there is an issue that bothers me:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would love to be able to encrypt separate partitions with one passphrase (the way it is done in Anaconda installer/Fedora or MX linux). Now I have an option to encrypt all disk, but I want to have separate root, /home, swap partitions all encrypted, leaving /boot /boot/efi unencrypted, so when I start the PC it would ask me for a passphrase to unlock all those partitions (disk). How do I do that? I could not figure that out, and I’m not experienced enough to try some command line stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe you could implement similar functionality to Elementary OS installer as the Anaconda installer have for encryption? Give more options, more flexibility?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks guys!&lt;/p&gt;&#xA;" OwnerUserId="20623" LastActivityDate="2020-02-10T23:04:25.387" Title="Encryption of multiple disk partitions" Tags="|encryption|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22400" PostTypeId="2" ParentId="22396" CreationDate="2020-02-10T23:50:59.833" Score="1" Body="&lt;p&gt;What it cames to my mind is to navigate with pantheon-files to a pdf file you want to open, right click on it, choose Open With and select &lt;strong&gt;Choose another application&lt;/strong&gt; in the bottom of the list &lt;strong&gt;no matter that your favorite application is above&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This way you will launch a popup window with a list of the recommended for this file type applications. Choose the one you want and set On the checkbox below &lt;strong&gt;Set as default&lt;/strong&gt;.  If your application is not in the recommended applications list, choose &lt;strong&gt;View All Applications&lt;/strong&gt; in order the list to be extended. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the easiest way to set a default application for a file extension.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-02-10T23:50:59.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22401" PostTypeId="2" ParentId="22392" CreationDate="2020-02-11T00:02:26.500" Score="0" Body="&lt;p&gt;Right click on an empty space into pantheon-files application and you will have some sort options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZIBFa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZIBFa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-02-11T00:02:26.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22402" PostTypeId="1" CreationDate="2020-02-11T02:13:00.657" Score="1" ViewCount="94" Body="&lt;p&gt;Is there a way of creating a dynamic swap file on elementary OS? I know Ubuntu has a tool to do so with a fixed file size but it seems a little buggy. Also I have found a tool for Ubuntu which creates dynamically sized swap but seems to be outdated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this just a kernel limitation or can it be done?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The reason for this is that I have an old laptop with a Intel Corei3 Processor, and 4GB of RAM. While running Ubuntu on it, as soon as I have multiple tabs open it starts freezing. So i tried repartitioning the swap partition yet at a certain stage in open applications it starts freezing again which makes it necessary to resize the swap partition again and that is just annoying a ridiculous. Even if I use a large swap partition I'm afraid it's still not stable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I have wiped out Ubuntu and installed Windows 10 and it runs like a breeze. Yet I really want linux on the laptop so I'm looking for alternative distributions that might have the capability of dynamic allocated swap file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only Unix like OS that I see does this very well is Mac OS. So why has this not been ported to Linux? &lt;/p&gt;&#xA;" OwnerUserId="20625" LastActivityDate="2020-02-11T02:13:00.657" Title="Dynamic swap file" Tags="|ubuntu|swap|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22404" PostTypeId="1" CreationDate="2020-02-11T08:58:19.727" Score="1" ViewCount="10" Body="&lt;p&gt;I need to hide my files, but from another Linux partition or linuxLive I can access to the files in the home folder. I don't want this.&#xA;I also tried to set reading right off with chmode but anyone can still access to y files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or why crypting the home folder is not possible in ElementaryOs ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reagrds&lt;/p&gt;&#xA;" OwnerUserId="20628" LastActivityDate="2020-02-11T08:58:19.727" Title="I can access to elementaryOs files from outside and/or how to crypt the home folder" Tags="|encryption|home|accessibility|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22405" PostTypeId="2" ParentId="22392" CreationDate="2020-02-11T09:54:29.497" Score="0" Body="&lt;p&gt;There is no way to change the &lt;em&gt;default&lt;/em&gt; sort order I am afraid.  You can only change the order of individual folders using the method given in the previous order. If you want this feature to be implemented you could raise an issue at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is an argument, perhaps, that when you change the sort order of a folder then the sort order of its subfolders should change as well.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-02-11T09:54:29.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22406" PostTypeId="2" ParentId="22390" CreationDate="2020-02-11T10:06:04.237" Score="0" Body="&lt;p&gt;There are known regressions/issues with the filechooser breadcrumbs.  See &lt;a href=&quot;https://github.com/elementary/files/issues/1226&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1226&lt;/a&gt; which matches your problem I think.  This will not be fixed in the next release - which is imminent but &lt;a href=&quot;https://github.com/elementary/files/pull/1136&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/pull/1136&lt;/a&gt; will be fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully your issue will be fixed in the following release in about a months time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A work around is to use the keyboard shortcut UpArrow to navigate to the parent directory.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-02-11T10:06:04.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22407" PostTypeId="2" ParentId="21843" CreationDate="2020-02-11T10:10:03.543" Score="0" Body="&lt;p&gt;There is a bug in Pantheon Files (which customises the filechooser) that contributes to this problem but it will be fixed in the next release. See &lt;a href=&quot;https://github.com/elementary/files/pull/1136&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/pull/1136&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-02-11T10:10:03.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22408" PostTypeId="1" CreationDate="2020-02-11T13:22:53.063" Score="1" ViewCount="23" Body="&lt;p&gt;I can’t add a photo, as the is no mouse to take a photo of...&#xA;It appears if I boot in safe mode. ONE of the problems is trying to fix it, without a mouse...&#xA;Clean install, on a Dell R420.&#xA;I’ve tried the X11 Xorg.conf attempt but it hanged on trying to install Gedit.&lt;/p&gt;&#xA;" OwnerUserId="20629" LastActivityDate="2020-02-11T13:22:53.063" Title="The mouse is invisible" Tags="|mouse|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22410" PostTypeId="2" ParentId="22395" CreationDate="2020-02-11T17:13:14.640" Score="0" Body="&lt;p&gt;Maybe you used 'sudo' while editing the .desktop file? &#xA;1) Check that the VMWare Workstaion .desktop launcher file it IS still at /usr/share/applications &#xA;2) If the file IS there, check permissions of it ('ls -laigh name_of_.desktop').&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Make sure you have read and execute permissions, you might need to 'sudo chmod +rx name_of_.desktop') &lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-11T17:13:14.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22411" PostTypeId="1" AcceptedAnswerId="22427" CreationDate="2020-02-11T18:32:07.240" Score="0" ViewCount="123" Body="&lt;p&gt;How to remove this? Because, i don't need this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DlZTv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DlZTv.png&quot; alt=&quot;Color tags&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20632" LastEditorUserId="20632" LastEditDate="2020-02-11T18:37:58.863" LastActivityDate="2020-02-12T19:04:07.467" Title="How to remove color tags in pantheon-files?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22412" PostTypeId="1" CreationDate="2020-02-11T20:42:20.930" Score="1" ViewCount="625" Body="&lt;p&gt;I've read through the answers to similar questions here, but I still haven't figured this out. I installed Steam via the AppCenter, and it seemed to go okay - I managed to get to the login screen and get my account connected, but then ... nothing. When I launch via app, the icon appears in the dock for maybe 10 seconds then disappears. When I launch via Terminal, I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Running Steam on elementary 5.1 64-bit&#xA;STEAM_RUNTIME is enabled automatically&#xA;Pins up-to-date!&#xA;/home/gareth/.local/share/Steam/ubuntu12_32/steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;... and then nothing. I'm a Linux noob, but very capable and driven to fix problems, so would really appreciate some help.&lt;/p&gt;&#xA;" OwnerUserId="20634" LastActivityDate="2024-02-24T04:10:41.267" Title="Steam installed, but won't run" Tags="|steam|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22413" PostTypeId="2" ParentId="22338" CreationDate="2020-02-11T23:12:46.177" Score="2" Body="&lt;p&gt;I want to try it out. Both direct DL and Magnet link produce elementaryos-5.1-stable.20200204.iso&#xA;Webpage says (that same updated version) it should produce following SHA256 checksum:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd66c32d53eab6f789b8e69e499305b7af0c9b3083ed54d50b111136d2795ea1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;BUt I got &#xA;&lt;code&gt;190bbf738db0f15daa9ee4095bb64c307950082819081a969f8edd51f1faab07&lt;/code&gt; too,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess updated webpage is not fully updated as that checksum is reported for former 20191202 file&lt;/p&gt;&#xA;" OwnerUserId="20638" LastActivityDate="2020-02-11T23:12:46.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22414" PostTypeId="2" ParentId="22382" CreationDate="2020-02-11T23:33:11.800" Score="1" Body="&lt;p&gt;elementary OS uses a service, systemd-resolved.service, to manage DNS lookups. This service is used by many Linux distributions, such as Ubuntu, the distribution on which elementary is built. Take a look at this similar question in the Unix &amp;amp; Linux Stack Exchange and see if this doesn't answer your question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/442598/how-to-configure-systemd-resolved-and-systemd-networkd-to-use-local-dns-server-f&quot;&gt;https://unix.stackexchange.com/questions/442598/how-to-configure-systemd-resolved-and-systemd-networkd-to-use-local-dns-server-f&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17455" LastActivityDate="2020-02-11T23:33:11.800" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22415" PostTypeId="1" CreationDate="2020-02-12T01:47:40.580" Score="1" ViewCount="5028" Body="&lt;p&gt;I've installed the EPSON driver from their website and can see my EPSON printer connected but when I print to it I almost instantly get a notification that the print job was cancelled. Anyone else have this issue? Any ideas on what I can do to fix it?&lt;/p&gt;&#xA;" OwnerUserId="20639" LastEditorUserId="20639" LastEditDate="2020-02-12T01:55:24.340" LastActivityDate="2022-11-22T21:51:10.773" Title="EPSON Printer instantly cancels Job" Tags="|printer|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22416" PostTypeId="2" ParentId="22371" CreationDate="2020-02-12T01:54:30.537" Score="0" Body="&lt;p&gt;Prueba con &lt;code&gt;sudo apt -f install&lt;/code&gt; de esta forma se instalaran las dependencias faltantes automáticamente espero que te sirva de ayuda &lt;/p&gt;&#xA;" OwnerUserId="20640" LastActivityDate="2020-02-12T01:54:30.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22417" PostTypeId="1" CreationDate="2020-02-12T02:59:24.660" Score="1" ViewCount="380" Body="&lt;p&gt;I am able to get my Powerbeats3 to work as a Bluetooth A2DP sync, however I can not get the mic or even the HFP profile to work. I am running 5.1 Hera.&lt;/p&gt;&#xA;" OwnerUserId="17132" LastActivityDate="2020-02-12T02:59:24.660" Title="Powerbeats3 Bluetooth Mic Not Working" Tags="|release-hera|bluetooth|audio|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22420" PostTypeId="2" ParentId="22393" CreationDate="2020-02-12T12:33:20.983" Score="0" Body="&lt;p&gt;Probably need to use the usb.  I have read that the graphics card on this is not working and needs to be disabled in Grub and then permanently in the grub config.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://orville.thebennettproject.com/articles/installing-ubuntu-14-04-lts-on-a-2011-macbook-pro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://orville.thebennettproject.com/articles/installing-ubuntu-14-04-lts-on-a-2011-macbook-pro/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8319" LastActivityDate="2020-02-12T12:33:20.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22421" PostTypeId="2" ParentId="22412" CreationDate="2020-02-12T13:49:03.243" Score="0" Body="&lt;p&gt;I'm not sure what could cause this, but as a workaround you can try another installing method for Steam, which there are several of.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;There are two different Steam applications listed on the AppCentre.&#xA;From what I've gathered the one called &lt;em&gt;Steam&lt;/em&gt; is the regular&#xA;installer while the one called &lt;em&gt;Steam installer&lt;/em&gt; has some slight&#xA;modifications for Ubuntu (which elementary OS is based on). I have used the latter one.&lt;/li&gt;&#xA;&lt;li&gt;Valve-provided&#xA;Steam DEB installer. You can find it &lt;a href=&quot;https://store.steampowered.com/about/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and use &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy.desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; to&#xA;install it.&lt;/li&gt;&#xA;&lt;li&gt;Flatpak at&#xA;&lt;a href=&quot;https://flathub.org/apps/details/com.valvesoftware.Steam&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/com.valvesoftware.Steam&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;You can also search and ask for help in Valve's Steam for Linux Client GitHub page:&#xA;&lt;a href=&quot;https://github.com/ValveSoftware/steam-for-linux/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ValveSoftware/steam-for-linux/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2020-02-12T13:49:03.243" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22424" PostTypeId="2" ParentId="22023" CreationDate="2020-02-12T16:22:06.277" Score="0" Body="&lt;p&gt;assuming you have free space on your disk&#xA; - boot to a live distro that has graphical gparted tool in it&#xA; - resize your / partition down to whatever you are comfortable with&#xA; - boot back to your running OS on the hard disk to verify disk okay&#xA; - with the free disk space create another partition&#xA; - create a filesystem (maybe ext4) for this partition&#xA; - create a mount point for this new filesystem&#xA; - mount it manually to test it out&#xA; - add new partition to /etc/fstab&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Damn ... why isn't this post formatting correctly&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2020-02-12T16:22:06.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22425" PostTypeId="1" AcceptedAnswerId="22663" CreationDate="2020-02-12T16:43:08.180" Score="2" ViewCount="220" Body="&lt;p&gt;I don't like the *** marks when I type my password in the terminal (they reveal how many characters my password has). Is there a way to turn that off so nothing appears (like every other GNU/Linux distro out there?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="20650" LastActivityDate="2020-03-08T03:10:42.730" Title="How to hide characters in password typing" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22426" PostTypeId="1" CreationDate="2020-02-12T17:25:12.640" Score="1" ViewCount="133" Body="&lt;p&gt;I have some experience setting up Windows Linux Dual boot, but unfortunately yesterday I ran into a problem. The grub menu does not have Windows 7 on it, and I don't know how to get it on there. I installed a new version of Linux onto an old laptop. The laptop does not have UEFI, it has the old BIOS system only, and I think the grub menu installation expected the Windows to have an entry in an ESP partition maybe. I don't know. There was no ESP partition prior to installing Linux ElementaryOS (an ubuntu variant)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is for a client, and his applications on the Windows partition are important for his business, he cannot lose them, so we cannot merely reinstall Windows 7 and clear the system. How do I get Windows 7 on the Grub menu, or just go back to booting directly into Windows 7?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Lenovo laptop, very old, Windows 7 OEM 64-bit&#xA;BIOS Only, no UEFI&#xA;4Gb RAM Intel i3 2gz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already attempted to use:&#xA;Boot-Recovery Live CD (automated repair with the new and old versions)&#xA;Boot Ice (don't know the exact steps to take)&#xA;Windows 10 automated Startup Repair&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have a solution, even if it means only booting to Windows 7, and never again to ElementaryOS, this client would be OK with that. We are desparate and short on time to fix this, so he can get back to his Windows applications. I use mostly linux at home, but he needs a couple Windows applications for his work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for all your help!&lt;/p&gt;&#xA;" OwnerUserId="20652" LastActivityDate="2024-02-26T14:04:05.523" Title="Windows 7 does not boot after installing ElementaryOS 5.1" Tags="|boot|grub|microsoft-windows|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22427" PostTypeId="2" ParentId="22411" CreationDate="2020-02-12T19:04:07.467" Score="0" Body="&lt;p&gt;There isn't a way of removing the color-tag plugin using the UI I am afraid. One way removing it would be to move the file &lt;code&gt;/usr/lib/x86_64-linux-gnu/io.elementary.files/plugins/core/pantheon-files-ctag.plug&lt;/code&gt; into a new subfolder of &lt;code&gt;/usr/lib/x86_64-linux-gnu/io.elementary.files/plugins&lt;/code&gt; called e.g. &lt;code&gt;disabled&lt;/code&gt;.  You would need to open Files as administrator to do this.  You may find the plug reappearing if you update Files and it definitely will if you reinstall. A way of disabling unwanted plugins with a significant overhead might be a feature you want to request at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-02-12T19:04:07.467" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22428" PostTypeId="2" ParentId="22347" CreationDate="2020-02-12T20:42:13.603" Score="0" Body="&lt;p&gt;As a workaround you can create a bash script to run the app. Basically in the EXEC= field you would use your bash script path (i.e.: /home/user/script.sh). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then your .sh script should just be used to launch the app:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash &#xA;GTK_CSD=0 grass74&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save it, 'chmod +x script.sh' and that should work –&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-12T20:42:13.603" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22429" PostTypeId="2" ParentId="22426" CreationDate="2020-02-12T20:48:58.000" Score="0" Body="&lt;p&gt;From the linux system (Not the Live CD), try running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You might need to manually mount the (Windows) partition before running that command, I had mixed results in the past. But 99.99% of the time, it founds the windows partition (if it's there) and add the grub entry.&lt;/p&gt;&#xA;" OwnerUserId="17526" LastEditorUserId="25063" LastEditDate="2021-02-10T23:11:37.913" LastActivityDate="2021-02-10T23:11:37.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22431" PostTypeId="1" CreationDate="2020-02-13T02:07:29.667" Score="0" ViewCount="161" Body="&lt;p&gt;When trying Elementary OS 5.1 on a 2013 MacBook Air 13 (6,2) from a USB stick, everything seems to work, except for WiFi. The WiFi hardware does not show up at all.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There is &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11783/elementary-os-on-macbook-wont-display-wifi-settings-how-do-i-fix&quot;&gt;a very similar question&lt;/a&gt; already, and it has an answer, but for a different version of Elementary OS (5.0). That solution removes the &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; package and installs &lt;code&gt;firmware-b43-installer&lt;/code&gt;, but 5.1 does not include &lt;code&gt;bcmwl-kernel-source&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20654" LastEditorUserId="15904" LastEditDate="2020-02-21T08:15:41.553" LastActivityDate="2020-02-21T08:15:41.553" Title="MacBook Air WiFi antenna not detected on Elementary OS 5.1" Tags="|wifi|release-hera|drivers|macbook|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="22434" PostTypeId="1" CreationDate="2020-02-13T03:05:50.120" Score="1" ViewCount="670" Body="&lt;p&gt;I'm trying to use my wavlink 4k USB docking station: &lt;a href=&quot;https://wavlink.com/en_us/product/WL-UG69PD1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wavlink.com/en_us/product/WL-UG69PD1.html&lt;/a&gt; with Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the following: &lt;a href=&quot;https://github.com/AdnanHodzic/displaylink-debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/AdnanHodzic/displaylink-debian&lt;/a&gt;, DisplaLink option now shows up but says &quot;cable unplugged&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/AdnanHodzic/displaylink-debian&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/AdnanHodzic/displaylink-debian&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/s8VDa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/s8VDa.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20657" LastActivityDate="2020-02-13T03:05:50.120" Title="Install DisplayLink on Linux Elementary OS" Tags="|release-hera|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22436" PostTypeId="1" CreationDate="2020-02-13T11:04:14.090" Score="1" ViewCount="2672" Body="&lt;p&gt;Yesterday there were 9 system upgrades in the AppCenter. I upgraded, but org.gnome.Platform Flatpak runtime was still listed.&#xA;I tried again, and it remains there waiting for upgrade.&#xA;Also might maybe be relevant to mention: since some days after I press the upgrade button it starts immediately to fill the blue bar (downloading, installing etc) WITHOUT ASKING for the authentication, as usually. After that it does NOT crash, as it did some time ago, but it also does NOT update. Flatpak runtime remains there, AppCenter remains open, update button is visible. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Today I tried the solution suggested on the chosen answer of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/22008/appcenter-cant-update-flatpak-packages&quot;&gt;this thread&lt;/a&gt; and here's the terminal output:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ flatpak install org.freedesktop.Platform/x86_64/19.08&#xA;Looking for matches…&#xA;Found similar ref(s) for ‘org.freedesktop.Platform/x86_64/19.08’ in remote ‘flathub’ (user).&#xA;Use this remote? [Y/n]: y&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                  Branch   Op   Remote   Download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;1. [✓] org.freedesktop.Platform.Locale     19.08    i    flathub   16,7 kB / 318,2 MB&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;[✗] org.freedesktop.Platform.openh264   19.08    i    flathub  593,6 kB / 593,4 kB&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[✓] org.freedesktop.Platform            19.08    i    flathub   11,4 MB / 238,1 MB&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Warning: org.freedesktop.Platform.openh264 not installed&#xA;Installation complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ flatpak uninstall --unused&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                              Branch          Op&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;1. [-] org.freedesktop.Platform.VAAPI.Intel            18.08           r&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;[-] org.freedesktop.Platform.html5-codecs           18.08           r&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[-] org.freedesktop.Platform                        19.08           r&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[-] org.freedesktop.Platform.Locale                 19.08           r&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[-] org.gnome.Platform                              3.32            r&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[-] org.gnome.Platform.Locale                       3.32            r&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Uninstall complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ flatpak update&#xA;Looking for updates…&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                  Branch   Op   Remote   Download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;1. [✗] org.freedesktop.Platform.openh264   19.08    i    flathub  593,6 kB / 593,4 kB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Warning: org.freedesktop.Platform.openh264 not installed&#xA;Installation complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ sudo apt install org.freedesktop.Platform.openh264&#xA;[sudo] password for master:&lt;br&gt;&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br&gt;&#xA;Reading state information... Done&#xA;E: Unable to locate package org.freedesktop.Platform.openh264&#xA;E: Couldn't find any package by glob 'org.freedesktop.Platform.openh264'&#xA;E: Couldn't find any package by regex 'org.freedesktop.Platform.openh264'&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ sudo flatpak repair&#xA;Working on the system installation at /var/lib/flatpak&#xA;Segmentation fault&lt;/p&gt;&#xA;&#xA;&lt;p&gt;master@elm:~$ flatpak update&#xA;Looking for updates…&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                  Branch   Op   Remote   Download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;1. [✗] org.freedesktop.Platform.openh264   19.08    i    flathub  593,6 kB / 593,4 kB&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Warning: org.freedesktop.Platform.openh264 not installed&#xA;Installation complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE (March 17, 2020): It's getting worse. Today there were several system components to update, plus the above mentioned gnome Platform, plus two new gnome Platform.Locale. After installing most of them, the AppCenter crashed. &#xA;I started it again, tried to update again, it updated one library (don't recall the name) and crashed again. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/0WlSs.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0WlSs.jpg&quot; alt=&quot;screenshot before the last update&quot;&gt;&lt;/a&gt;&#xA;Tried it yet again, and the two.Locale updated, this time without crashing, but the old one is still there and the update button is gone. After closing the AppCenter and opening it again, the button is back but 1) it doesn't ask for the password  before start 'updating' and 2) doesn't change a thing, file is still listed in there.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/OXP0v.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OXP0v.jpg&quot; alt=&quot;org.gnome.Platform runtime remains&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19358" LastEditorUserId="19358" LastEditDate="2020-03-17T18:20:28.443" LastActivityDate="2024-01-15T02:03:55.523" Title="UPDATED: org.gnome.Platform Flatpak runtime STILL not updating" Tags="|updates|appcenter|flatpak|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22437" PostTypeId="1" AcceptedAnswerId="22829" CreationDate="2020-02-13T13:54:36.767" Score="1" ViewCount="518" Body="&lt;p&gt;When I try running &lt;code&gt;sudo add-apt-repository ppa:openrazer/stable&lt;/code&gt; it hangs. I am on Elementary OS 5.1 Hera. No other repositories work. I have install software-properties-common and its dependencies. If I press &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;C&lt;/kbd&gt; then I get this output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Traceback (most recent call last):&#xA;  File &amp;quot;/usr/bin/add-apt-repository&amp;quot;, line 136, in &amp;lt;module&amp;gt;&#xA;    shortcut = shortcut_handler(line)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&amp;quot;, line 868, in shortcut_handler&#xA;    ret = factory(shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 398, in shortcut_handler&#xA;    return PPAShortcutHandler(shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 355, in __init__&#xA;    info = get_ppa_info(self.shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 326, in get_ppa_info&#xA;    ret = get_ppa_info_from_lp(user, ppa)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 101, in get_ppa_info_from_lp&#xA;    return get_info_from_lp(lp_url)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 95, in get_info_from_lp&#xA;    return get_info_from_https(lp_url, True)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 88, in get_info_from_https&#xA;    data = _get_https_content_py3(url, accept_json)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 120, in _get_https_content_py3&#xA;    lp_page = urllib.request.urlopen(request, cafile=LAUNCHPAD_PPA_CERT)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 223, in urlopen&#xA;    return opener.open(url, data, timeout)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 526, in open&#xA;    response = self._open(req, data)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 544, in _open&#xA;    '_open', req)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 504, in _call_chain&#xA;    result = func(*args)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 1361, in https_open&#xA;    context=self._context, check_hostname=self._check_hostname)&#xA;  File &amp;quot;/usr/lib/python3.6/urllib/request.py&amp;quot;, line 1318, in do_open&#xA;    encode_chunked=req.has_header('Transfer-encoding'))&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 1254, in request&#xA;    self._send_request(method, url, body, headers, encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 1300, in _send_request&#xA;    self.endheaders(body, encode_chunked=encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 1249, in endheaders&#xA;    self._send_output(message_body, encode_chunked=encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 1036, in _send_output&#xA;    self.send(msg)&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 974, in send&#xA;    self.connect()&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 1407, in connect&#xA;    super().connect()&#xA;  File &amp;quot;/usr/lib/python3.6/http/client.py&amp;quot;, line 946, in connect&#xA;    (self.host,self.port), self.timeout, self.source_address)&#xA;  File &amp;quot;/usr/lib/python3.6/socket.py&amp;quot;, line 713, in create_connection&#xA;    sock.connect(sa)&#xA;KeyboardInterrupt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20664" LastEditorUserId="25612" LastEditDate="2021-06-09T20:16:38.377" LastActivityDate="2021-06-09T20:16:38.377" Title="add-apt-repository not working" Tags="|release-hera|apt|python|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22439" PostTypeId="1" CreationDate="2020-02-13T18:18:08.900" Score="1" ViewCount="91" Body="&lt;p&gt;Can't change the admin password from the admin account...maybe in terminal, but not in GUI.  The only way I've found is to create a standard account and change admin password from there.&lt;/p&gt;&#xA;" OwnerUserId="20667" LastActivityDate="2024-02-24T02:07:00.787" Title="Admin Password can't be changed" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22440" PostTypeId="1" CreationDate="2020-02-13T21:47:48.010" Score="1" ViewCount="24" Body="&lt;p&gt;Please check out this short video I just posted regarding the issue I’m experiencing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/2mpzK64W1TM&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/2mpzK64W1TM&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see the audio is terribly distorted and only plays out of the left side. I’m dual booting both OS using rEFInd and the audio in OSX plays normally as it always did before.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas why I may be experiencing this? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="20668" LastActivityDate="2020-02-13T21:47:48.010" Title="Mid 2010 MacBook Dualbooting OSX &amp; Elementary OS Sound Issue" Tags="|macbook|audio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22441" PostTypeId="1" CreationDate="2020-02-14T02:10:45.873" Score="1" ViewCount="79" Body="&lt;p&gt;I downloaded the ISO from the official website, I installed it on the USB with Rufus, in GPT for UEFI, with FAT32. I already checked the ISO SHA256.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to boot it, it does nothing, does not boot. Fast boot disabled and secure boot too.&#xA;I am currently on Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop is a ASUS X411UF with Intel i5-8250U&lt;/p&gt;&#xA;" OwnerUserId="20670" LastEditorUserId="20670" LastEditDate="2020-02-14T03:51:57.790" LastActivityDate="2024-02-24T08:03:30.497" Title="USB doesn't t boot in UEFI mode" Tags="|boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22442" PostTypeId="2" ParentId="14337" CreationDate="2020-02-14T02:44:34.057" Score="1" Body="&lt;p&gt;Kinto swaps the keys the way you want, and I am the author of it. &lt;a href=&quot;https://github.com/rbreaves/kinto&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rbreaves/kinto&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On this example below it is from when I was mapping the Cmd location to Super while under the terminal - and to avoid writing custom xkb files. &lt;strong&gt;&lt;em&gt;Kinto actually does use Ctrl+Shift&lt;/em&gt;&lt;/strong&gt; in the Cmd key location for the terminals now.. but I use some custom symbols and types files for setxkbmap and xkbcomp to accomplish it.. again too much to post here and have it all make sense, because you'd still need the rest of my code to have it run right any ways.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# permanent apple keyboard keyswap&#xA;echo &quot;options hid_apple swap_opt_cmd=1&quot; | sudo tee -a /etc/modprobe.d/hid_apple.conf&#xA;update-initramfs -u -k all&#xA;&#xA;# Temporary &amp;amp; instant apple keyboard keyswap&#xA;echo '1' | sudo tee -a /sys/module/hid_apple/parameters/swap_opt_cmd&#xA;&#xA;# Windows and Mac keyboards - GUI (Physical Alt is Ctrl, Physical Super is Alt, Physical Ctrl is Super)&#xA;setxkbmap -option;setxkbmap -option altwin:ctrl_alt_win&#xA;&#xA;# Windows and Mac keyboards - Terminal Apps (Physical Alt is Super, Physical Super is Alt, Physical Ctrl is Ctrl)&#xA;setxkbmap -option;setxkbmap -option altwin:swap_alt_win&#xA;&#xA;# If the hid_apple driver is not loaded for Apple keyboards, which can be found out&#xA;# by the lsmod command then the above setxkbmap commands will not work&#xA;# Use the following commands for Apple style keyboards without an hid_apple driver&#xA;#&#xA;# Note: this could also apply to hid_apple driver as well &#xA;# if this option is set to 0 inside swap_opt_cmd&#xA;#&#xA;lsmod | grep hid_apple&#xA;&#xA;# Apple keyboard without hid_apple - GUI&#xA;setxkbmap -option;setxkbmap -option ctrl:swap_lwin_lctl,ctrl:swap_rwin_rctl&#xA;&#xA;# Apple keyboard without hid_apple - Terminal&#xA;setxkbmap -option;setxkbmap -option altwin:alt_super_win&#xA;&#xA;#&#xA;# If you want a systemd service and bash script to help toggle between&#xA;# GUI and Terminal applications then look at project Kinto.&#xA;# https://github.com/rbreaves/kinto&#xA;#&#xA;# Note: The above may not work for Chromebooks running Linux, please look&#xA;# at project Kinto for that.&#xA;#&#xA;# If anyone would like to contribute to the project then please do!&#xA;#&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18707" LastEditorUserId="18707" LastEditDate="2020-02-16T06:02:39.650" LastActivityDate="2020-02-16T06:02:39.650" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22443" PostTypeId="1" CreationDate="2020-02-14T06:09:21.583" Score="1" ViewCount="91" Body="&lt;p&gt;I've been having a problem for about 3 months now: after a few hours with the screen locked, when I login I find all apps closed. Even the dock is closed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it is for an hour or less (I have not chronometered this) it does not happen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using Hera, fully updated to the latest package. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Help is much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="17056" LastActivityDate="2024-02-26T07:01:10.123" Title="Elementary OS closing all apps after locked for a long period" Tags="|release-hera|suspend|apps|lock|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22444" PostTypeId="1" CreationDate="2020-02-14T07:13:39.460" Score="1" ViewCount="95" Body="&lt;p&gt;I'm having an issue with getting the keyboard plugin to work in switchboard. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've installed both switchboard and switchboard-plugin-keyboard via the terminal with the commands -&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install switchboard&#xA;sudo apt install switchboard switchboard-plugin-keyboard&#xA;io.elementary.switchboard (to launch switchboard)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also updated and upgraded the apt files and verified both installs and have not been able to figure out whats going wrong. I've pretty new to linux and am not quite sure what to do next.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OaSwb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OaSwb.png&quot; alt=&quot;This is an image of my intended effect.&quot;&gt;&lt;/a&gt;&#xA;The 'Show in Panel' selections are what I'm try to achieve.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QcZeO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QcZeO.png&quot; alt=&quot;not working&quot;&gt;&lt;/a&gt; &#xA;This is what my keyboard options look like while in switchboard with the keyboard plugin installed. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If anyone could help me figure out whats going on here it would be greatly appreciated. &lt;/p&gt;&#xA;" OwnerUserId="20672" LastActivityDate="2020-02-14T07:13:39.460" Title="Issue installing switchboard-plugin-keyboard" Tags="|keyboard|switchboard|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22447" PostTypeId="1" CreationDate="2020-02-14T15:45:59.100" Score="1" ViewCount="143" Body="&lt;p&gt;Been going crazy with this since yesterday. I'm running a Geforce 710 using the nvidia-440 driver which I downloaded from the Ubuntu reps, and suddenly after about 3 hours of gaming yesterday, system froze, rebooted, then driver wouldn't load. Purged, reinstalled, nada. Then tried purging, checking gcc version for building .run file directly from nvidia, won't build. Purged all that work, reinstalled 440 again through ubuntu-drivers autoinstall, worked then rebooted and gone again. Tried various drivers none work. Then suddenly 440 worked again. Then rebooted, didn't work, then rebooted again and now working. I really have no clue what is happening but was inches away from putting Windows 10 on this machine. I've read hundreds of forums at this point and all recommend troubleshooting the way I have, but the problem is I'm not getting any kind of consistent results. Does anyone know what is going on here? &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2020-02-17T21:43:45.450" Title="nvidia-driver-440 very flakey on 5.3.0-28" Tags="|nvidia|nvidia-driver|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22448" PostTypeId="2" ParentId="22447" CreationDate="2020-02-14T16:00:44.647" Score="1" Body="&lt;p&gt;Ooooh! I might have just figured something out. I think this has something to do with LightDM starting before the nvidia driver loads. If I do not login, and first drop to command line using ctrl alt f1, then sudo service lightdm stop, then start it up again, it seems to work correctly. At least it did a couple times in a row for me now. I'll post here again if any new developments. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2020-02-14T16:00:44.647" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22450" PostTypeId="2" ParentId="22441" CreationDate="2020-02-14T17:13:31.793" Score="0" Body="&lt;p&gt;Try using rufus with this parameters to boot in the UEFI USB installation/liveCD&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6QuCd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6QuCd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-14T17:13:31.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22451" PostTypeId="2" ParentId="22439" CreationDate="2020-02-14T17:22:01.373" Score="0" Body="&lt;p&gt;When you say 'admin' you mean root? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If so, one way to do it is by being logged on a terminal with a user who can elevate privileges(sudo) is to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo passwd root&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That should allow you to change root's password. The other option is to 'become' root and then do a passwd:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo su&#xA;# passwd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-02-14T17:22:01.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22452" PostTypeId="2" ParentId="22396" CreationDate="2020-02-14T20:47:20.503" Score="0" Body="&lt;p&gt;Yes, done that.  Doesn't work in Pantheon, works perfectly in Nautilus though.  I'm thinking that Pantheon can't open 32bit apps?&lt;/p&gt;&#xA;" OwnerUserId="10449" LastActivityDate="2020-02-14T20:47:20.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22453" PostTypeId="2" ParentId="22447" CreationDate="2020-02-14T20:48:18.993" Score="1" Body="&lt;p&gt;I had the same issue today, you should just use the appcenter to install 390 or even 430, the performance difference shouldn't be noticable. Were just going to have to wait a little while while the kernel team sorts all the issues around 5.3&#xA;Hope you stay with us!&lt;/p&gt;&#xA;" OwnerUserId="20683" LastActivityDate="2020-02-14T20:48:18.993" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22455" PostTypeId="2" ParentId="12548" CreationDate="2020-02-14T22:28:50.107" Score="1" Body="&lt;p&gt;Is there a way to do this on 5.1 Hera? If I go to &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/&lt;/code&gt;&#xA;and edit &lt;code&gt;apps.css&lt;/code&gt;, there is no line containing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;composited-indicator {&#xA;    padding: 0 6px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15904" LastEditorUserId="15904" LastEditDate="2020-02-15T03:40:06.713" LastActivityDate="2020-02-15T03:40:06.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22458" PostTypeId="1" CreationDate="2020-02-15T10:03:46.220" Score="0" ViewCount="319" Body="&lt;p&gt;I tried to add an application menu item to launch a simple bash script:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash &#xA;GTK_CSD=0 grass74&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;on terminal to start an application, both with the AppEditor utility and manually by entering the path of the script in the .desktop file:  &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=/home/andrea/Applicazioni/grass74.sh  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but either way it doesn't work.&lt;br&gt;&#xA;The use of a bash script to start the program stems from the fact that the original program launcher does not work in Elementary OS while it works fine in Ubuntu 18.04 and Mint 19.3.&lt;br&gt;&#xA;The script works by launching it from the terminal with ./grass74.sh but does not work by clicking on the application menu icon.&lt;br&gt;&#xA;I thought the problem could arise from the elementary OS terminal emulator because the application starts from the terminal, but I was not able to understand how to solve it.&lt;/p&gt;&#xA;" OwnerUserId="20324" LastEditorUserId="20324" LastEditDate="2020-02-15T17:34:45.057" LastActivityDate="2020-02-15T17:34:45.057" Title="How to run a bash script in terminal from the applications menu in elementary OS 5.1" Tags="|slingshot|script|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22459" PostTypeId="1" CreationDate="2020-02-15T10:57:15.937" Score="0" ViewCount="65" Body="&lt;p&gt;I am on elementaryOS Hera and have an interesting phenomenon where some blackish bar occludes part of Firefox's viewport:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/x7dz5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/x7dz5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also you can see that the viewport is cropped somehow (see the beige help box to the right).&#xA;It is not part of the webpage,  and opening Developer Tools leads to another black bar at the bottom:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8op0b.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8op0b.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only things I did recently where enabling webrender in &lt;code&gt;about:config&lt;/code&gt; (reverted, no change) and running &lt;code&gt;sudo apt install mesa-*&lt;/code&gt; (since reverted, no change).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Firefox Version: 73.0.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;What I've tried&lt;/h1&gt;&#xA;&#xA;&lt;p&gt;Starting FF in safe mode, without plugins, removes the problem. However, disabling manually all my addons does not help, so it must be something else about safe mode that does it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Removing &lt;code&gt;prefs.js&lt;/code&gt; preferences also does not solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could be causing this? FWIW, I have an Nvidia RTX 2070 Super.&lt;/p&gt;&#xA;" OwnerUserId="3219" LastEditorUserId="3219" LastEditDate="2020-02-15T11:37:13.680" LastActivityDate="2024-02-24T23:04:25.543" Title="Strange occlusions + cropping in Firefox" Tags="|release-hera|graphic-drivers|graphics|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22460" PostTypeId="2" ParentId="22459" CreationDate="2020-02-15T12:11:49.327" Score="0" Body="&lt;p&gt;It &lt;em&gt;was&lt;/em&gt; webrender after all. Disabling it in &lt;code&gt;prefs.js&lt;/code&gt; and restarting FF helped. Unsure why going through &lt;code&gt;about:config&lt;/code&gt;  didn't.&lt;/p&gt;&#xA;" OwnerUserId="3219" LastActivityDate="2020-02-15T12:11:49.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22463" PostTypeId="1" CreationDate="2020-02-16T00:02:09.980" Score="0" ViewCount="389" Body="&lt;p&gt;Relatively new to Linux. Lenovo T495 - AMD Ryzen™ 7 PRO 3700U - AMD Vega 10 graphics. Can't get video card working properly and can't install AMD pro drivers because of a 'failed for running kernel' warning. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Started shortly after the fresh install I went through the black screen at login and had to add 'nomodeset' in grub to get in. I then, based off &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19018/amdgpu-pro-on-juno-to-improve-performance-and-compability&quot;&gt;another post here&lt;/a&gt;, I installed the mesa and vulkan drivers with this code:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mesa-vulkan-drivers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;That solved the black screen problem, as I was able to remove 'nomodeset' and have a normal boot screen without issue. But I have all sorts of video issues. Playback in 'Library' is slow/glitchy on a 1080p video. And even when I close the video the audio keeps playing and I have to kill the process in Monitor. Playback of videos in VLC is smoother but the screen flashes black when I adjust volume or brightness with the F keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then followed that post's advice for how to install the AMD Pro drivers, but at the end it says:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: amdgpu dkms failed for running kernel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I uninstalled the amd pro drivers (otherwise I can't login cause it just keeps looping back to the login screen), and I followed instructions and installed ukuu and changed the kernel from 5.3.0 to 5.4.13 and then the latest kernel (I think it was 5.5 something), each time trying to install amd pro drivers and each time got the same 'failed for running kernel warning'. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried the suggestion from somewhere to also manually install with this code&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install amdgpu-dkms libdrm-amdgpu-amdgpu1 libdrm-amdgpu1 libdrm2-amdgpu  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Same result.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what to do anymore. When I decided to quit Apple I expected some difficulties, but when I test drove things with an NVIDIA Macbook I could install the proprietary drivers in the AppCenter. With AMD it feels like we're just completely left to our own devices. Am I missing something? I'm 2 days into working on this. There has to be a way, but I'm not finding anything out there...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Really appreciate any help.&lt;/p&gt;&#xA;" OwnerUserId="20692" LastEditorUserId="20692" LastEditDate="2020-02-16T00:11:20.220" LastActivityDate="2024-01-20T05:02:50.323" Title="Can't get AMD video card working" Tags="|amd|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22465" PostTypeId="2" ParentId="22463" CreationDate="2020-02-16T11:22:04.700" Score="0" Body="&lt;p&gt;I recommend to start again with a fresh install of elementary. Just install, update your system and install any driver that may appear on AppCenter. You can also execute &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; to be sure you are not missing any driver!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You may need to use the &lt;code&gt;nomodeset&lt;/code&gt; parameter on the first boot to avoid that black screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After that, reboot your computer and check if it works fine. To solve screen flickering issues I think it will be enough to just tweak the driver settings, there's no need to install development versions for that matter.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-02-16T11:22:04.700" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22467" PostTypeId="1" CreationDate="2020-02-16T13:21:27.903" Score="1" ViewCount="101" Body="&lt;p&gt;I have installed elementary hera 5.1 on my Asus Vivobook and i want to connect to use my Hisense TV as an external monitor via HDMI. However I have been unable to successfully do this. Sometimes it won't displlay anything, sometimes it shows just the homescreen on one screen and opens apps on the other screen, and if i try to mirror, i get a massive zoomed in picture on both the laptop and tv and have to unplug the cable. I have tried researching this but have not found any method to do this.&#xA;If anyone knows how to connect to my TV, please reply.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="20699" LastActivityDate="2020-02-16T13:21:27.903" Title="How to connect to external display via hdmi?" Tags="|release-hera|hdmi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22469" PostTypeId="2" ParentId="22443" CreationDate="2020-02-16T17:14:18.660" Score="0" Body="&lt;p&gt;Most probably when it stays locked for long times it logs out, that is why when you unlock, you actually login again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Play around with the Power settings in System Settings, to configure it properly.&#xA;Look for the time setting in Suspend when inactive section.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4mEtj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4mEtj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20646" LastActivityDate="2020-02-16T17:14:18.660" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22470" PostTypeId="1" AcceptedAnswerId="22471" CreationDate="2020-02-16T18:39:06.943" Score="0" ViewCount="185" Body="&lt;p&gt;I’m an ESL teacher in Russia. To engage my students more I really want to create a HTML5 game similar to Alias (see &lt;a href=&quot;https://apps.apple.com/ru/app/alias-party-game/id1163843973?l=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://apps.apple.com/ru/app/alias-party-game/id1163843973?l=en&lt;/a&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I’m not a coder, so I’m looking for a code-free app creator resource that could be suitable for creating that type of games.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I’ve been looking on the Internet, but can’t find anything that could help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Show me the way, please.&lt;/p&gt;&#xA;" OwnerUserId="20703" LastActivityDate="2020-02-16T19:57:24.580" Title="How can I create a game like Alias?" Tags="|applications|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22471" PostTypeId="2" ParentId="22470" CreationDate="2020-02-16T19:57:24.580" Score="1" Body="&lt;p&gt;This StackExchange is not really the best place for this question. Nevertheless, there seem to already be a bunch of opensource projects already built emulating this game. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example, you can look at &lt;a href=&quot;https://github.com/hudochenkov/alias-game&quot; rel=&quot;nofollow noreferrer&quot;&gt;Aleks Hudochenkov's version&lt;/a&gt;. It lists words in English and Russian, and it looks like a great start. It requires &lt;a href=&quot;https://www.w3schools.com/whatis/whatis_npm.asp&quot; rel=&quot;nofollow noreferrer&quot;&gt;npm&lt;/a&gt; to build and &lt;a href=&quot;https://css-tricks.com/gulp-for-beginners/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gulp&lt;/a&gt; to run it, but this is how it looks like:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NJ485.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NJ485.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another one, with a more polished look can be found in &lt;a href=&quot;https://github.com/xdghcnt/alias-game-web&quot; rel=&quot;nofollow noreferrer&quot;&gt;Renato's GitHub&lt;/a&gt;. It only lists Croatian words, but it should not bee to difficult to modify it to fit your needs. It also displays a 60 seconds counter for every team, and tracks points:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KIvHi.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KIvHi.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/AndrewSergeev/Alias-android-game&quot; rel=&quot;nofollow noreferrer&quot;&gt;AndrewSergeev's Android version&lt;/a&gt; also looks amazing, and seems to 'emulate' the one you listed in your question. But it's written in Java, and would take quite the effort to start working on it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And the ones I listed above are just a tiny fraction of open-source versions available for free, but they all require a bit of technical knowledge to get them working, and moderate levels of various programming languages proficiency (particularly JavaScript). My suggestion would be to look around on github for already built projects, and if you find something that's close to what you want, get in touch with the developer or fork the repository and start modifying it yourself.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-02-16T19:57:24.580" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22472" PostTypeId="1" CreationDate="2020-02-16T23:08:20.907" Score="0" ViewCount="145" Body="&lt;p&gt;I am newbee or one might say a windows user i imagine that i a common joke in linux world,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;anyway i move to elementary OS after deep search and i appreciate the simplicity and UX of it everything works fine but some time when i do something i get error when i start appcenter i manage to fix few with google help, but this once i keeps on coming back&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: http://ppa.launchpad.net/alexlarsson/flatpak/ubuntu bionic InRelease is not (yet) available (Could not connect to ppa.launchpad.net:80 (91.189.95.83), connection timed out)&#xA;E: http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease is not (yet) available (Unable to connect to ppa.launchpad.net:http:)&#xA;E: http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease is not (yet) available (Unable to connect to ppa.launchpad.net:http:)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;i am using latest elementary OS release 5.1 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any support to fic this would be appreciated&lt;/p&gt;&#xA;" OwnerUserId="20689" LastEditorUserId="16827" LastEditDate="2020-02-18T12:22:38.203" LastActivityDate="2024-02-27T22:07:10.797" Title="Error when i open app center" Tags="|appcenter|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22473" PostTypeId="2" ParentId="22472" CreationDate="2020-02-17T00:09:50.937" Score="0" Body="&lt;p&gt;so now when re open appcenter i get same error/aler box saying &lt;/p&gt;&#xA;&#xA;&lt;p&gt;E: &lt;a href=&quot;http://dl.google.com/linux/chrome/deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://dl.google.com/linux/chrome/deb&lt;/a&gt; stable InRelease is not (yet) available (Could not connect to dl.google.com:80 (172.217.19.46), connection timed out)&#xA;E: &lt;a href=&quot;http://ppa.launchpad.net/alexlarsson/flatpak/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/alexlarsson/flatpak/ubuntu&lt;/a&gt; bionic InRelease is not (yet) available (Could not connect to ppa.launchpad.net:80 (91.189.95.83), connection timed out)&#xA;E: &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; bionic InRelease is not (yet) available (Unable to connect to ppa.launchpad.net:http:)&#xA;E: &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; bionic InRelease is not (yet) available (Unable to connect to ppa.launchpad.net:http:)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;guess its more issue, i hear to get off windows and start in the new home of linux which i love and i am here to learn about, thanks again&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note: 2 question same day u guyz will hate me for sure&lt;/p&gt;&#xA;" OwnerUserId="20689" LastActivityDate="2020-02-17T00:09:50.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22474" PostTypeId="2" ParentId="22362" CreationDate="2020-02-17T00:12:08.823" Score="0" Body="&lt;p&gt;Run these commands in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 40976EAF437D05B5&#xA;sudo apt-key adv --recv-keys --keyserver keyserver.ubuntu.com 3B4FE6ACC0B21F32&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20640" LastActivityDate="2020-02-17T00:12:08.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22476" PostTypeId="1" CreationDate="2020-02-17T07:43:23.850" Score="1" ViewCount="420" Body="&lt;p&gt;I have Acer laptop with 2 drives - hdd &amp;amp; nvme. Elementary OS installer can see only hdd (the same situation is while running EOs from flash drive - I can see only hdd). There is no ahci swithchers in bios. I tried to run the command &quot;nvme_load=YES&quot; as Dell website recommended for ubuntu, but this doesn't solve my problem. &lt;/p&gt;&#xA;" OwnerUserId="20707" LastActivityDate="2024-02-28T04:06:35.737" Title="Can't install Elementary OS on NVMe" Tags="|system-installation|release-hera|hardware|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22477" PostTypeId="1" CreationDate="2020-02-17T12:32:25.203" Score="2" ViewCount="188" Body="&lt;p&gt;After i close a video the sound keeps playing in the background. If i play 2, 3 or more videos and then close them they all stack up in the background.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/atv7y.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/atv7y.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20709" LastActivityDate="2020-02-17T12:32:25.203" Title="Video keeps playing in the background after closing it" Tags="|videos|video-player|video-playback|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22480" PostTypeId="2" ParentId="22447" CreationDate="2020-02-17T21:43:45.450" Score="1" Body="&lt;p&gt;Seems like today's update to 5.3.0.4 and xserver updates fixed the issue!&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2020-02-17T21:43:45.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22481" PostTypeId="1" CreationDate="2020-02-18T13:25:01.273" Score="1" ViewCount="2663" Body="&lt;p&gt;I just installed Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm switching from Windows 10, I don't know anything about Linux, I'm not a technical person.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to install Brave browser, I checked Brave guidelines, but I don't know what any of it means.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://brave-browser.readthedocs.io/en/latest/installing-brave.html#linux&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone please help me install Brave? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="20720" LastActivityDate="2020-02-19T00:57:30.820" Title="How to install Brave browser on Elementary OS?" Tags="|software-installation|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="22482" PostTypeId="2" ParentId="22481" CreationDate="2020-02-18T15:00:43.073" Score="1" Body="&lt;p&gt;Just follow the Ubuntu installation. Open the terminal and follow the steps.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install apt-transport-https curl&#xA;&#xA;$ curl -s https://brave-browser-apt-release.s3.brave.com/brave-core.asc | sudo apt-key --keyring /etc/apt/trusted.gpg.d/brave-browser-release.gpg add -&#xA;&#xA;$ echo &quot;deb [arch=amd64] https://brave-browser-apt-release.s3.brave.com/ stable main&quot; | sudo tee /etc/apt/sources.list.d/brave-browser-release.list&#xA;&#xA;$ sudo apt update&#xA;&#xA;$ sudo apt install brave-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13416" LastActivityDate="2020-02-18T15:00:43.073" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22484" PostTypeId="2" ParentId="22476" CreationDate="2020-02-18T16:31:20.633" Score="0" Body="&lt;p&gt;I had to remove the HDD on my computer before I could install Elementary OS onto the NVME drive.  If you can't remove the HDD easily look in the BIOS to see if there is an option to turn of the particular SATA port your HDD is attached to.&lt;/p&gt;&#xA;" OwnerUserId="20712" LastActivityDate="2020-02-18T16:31:20.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22487" PostTypeId="2" ParentId="22481" CreationDate="2020-02-19T00:57:30.820" Score="0" Body="&lt;p&gt;You can also install it via Snap:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install brave&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-02-19T00:57:30.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22488" PostTypeId="2" ParentId="2811" CreationDate="2020-02-19T01:47:11.647" Score="0" Body="&lt;p&gt;I was able to install elementary OS with secure boot. During installation, I was partitioning the drive; it recognized that I was in secure boot mode and noticed that I did not have an EFI partition. I repartitioned it with an EFI parition (mounted at /boot/efi) and then elementary OS installed just fine. &lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-02-19T01:47:11.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22489" PostTypeId="2" ParentId="19284" CreationDate="2020-02-19T03:15:26.060" Score="0" Body="&lt;p&gt;Based on what you're describing, I think you're looking for classroom management software. I used to work for a school district and used LanSchool for this type of thing, but that was a Windows environment. I just did an Internet search and found Veyon is available for Linux.  That might be what you're looking for. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://veyon.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://veyon.io&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-02-19T03:15:26.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22490" PostTypeId="2" ParentId="19570" CreationDate="2020-02-19T04:37:04.143" Score="0" Body="&lt;p&gt;If you just want to try elementary OS, you can always run the live version. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You could also do a dual boot. Just create a separate partition and install elementary OS on it. Then when you boot up, you can choose between macOS and elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-02-19T04:37:04.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22491" PostTypeId="1" CreationDate="2020-02-19T05:46:23.940" Score="0" ViewCount="640" Body="&lt;p&gt;I am using Elementary OS 5.1.2 Hera on my Lenovo Ideapad S145 with AMD Ryzen 3 3200U CPU. Everything was fine until an update yesterday 18/FEB/2020 which upgraded my Linux kernel from 5.3.0-28-generic to 5.3.0-40-generic.&#xA;Since then whenever I boot Elementary OS using the default option, i.e. the latest kernel I am greeted by a black screen instead of the Elementary logo.&#xA;If it's of any relevance, during install the bash reported that OS could not find any display drivers for 'amdgpu' and 'navi20' or something similar. I am presently using the older kernel to use my computer. Kindly resolve this issue or suggest a workaround, as I am new to Linux and do not know any better.&#xA;Thanks,&#xA;Subharthi Kar&lt;/p&gt;&#xA;" OwnerUserId="20728" LastActivityDate="2020-03-07T21:09:11.233" Title="Elementary OS 5.1.2 Hera - Black screen on boot with latest kernel 5.3.0-40-generic" Tags="|boot|release-hera|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22492" PostTypeId="2" ParentId="10048" CreationDate="2020-02-19T10:32:42.587" Score="0" Body="&lt;p&gt;I hope its not to late.&#xA;On top right side, click menu - Add New Calendar, choose type GOOGLE &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HyACY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HyACY.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;put your gmail on user fields, evently will show popup to insert password gmail - if you use two factor auth, dont put your gmail password, but generate App Password from Google here &lt;a href=&quot;https://myaccount.google.com/security&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://myaccount.google.com/security&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Z4qO0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Z4qO0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Click App Password - generate password for your calendar app. Fill this password to popup window from calendar App. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope it works. Thanks&lt;/p&gt;&#xA;" OwnerUserId="20051" LastActivityDate="2020-02-19T10:32:42.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22493" PostTypeId="1" CreationDate="2020-02-19T12:03:51.887" Score="2" ViewCount="126" Body="&lt;p&gt;Is there a possibility to enable opened applications icons to display on wingpanel tray? Now not even one application is being showed. I have elementary OS 5.1.2 Hera. And my system tray with opened few applications looks like that &lt;a href=&quot;https://i.stack.imgur.com/XN44K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XN44K.png&quot; alt=&quot;wingpanel&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20731" LastEditorUserId="4185" LastEditDate="2021-06-09T20:22:32.017" LastActivityDate="2021-06-09T20:22:32.017" Title="Opened applicatons icons on system tray" Tags="|wingpanel|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22495" PostTypeId="2" ParentId="19570" CreationDate="2020-02-19T13:01:52.840" Score="1" Body="&lt;p&gt;TL;DR &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;There is always a risk of corrupting partitions so make sure to back everything up with Time Machine and you can always recover with that backup even if you don't have a recovery partition.&lt;/li&gt;&#xA;&lt;li&gt;If everything goes south and you end up without a Time Machine backup or recovery partition the firmware can recover remotely if you boot while holding Command+Option+R as long as you can get on the internet via wifi or ethernet.&lt;/li&gt;&#xA;&lt;li&gt;As suggested by Paul I would recommend testing everything thoroughly in a live session. I am not sure about support for the 2017 MacBook but I couldn't get the bluetooth to work reliably or the camera to work at all so I ended up buying a USB bluetooth dongle (&lt;a href=&quot;https://amzn.to/2HzhWhh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://amzn.to/2HzhWhh&lt;/a&gt;) and camera (&lt;a href=&quot;https://amzn.to/2V6yFR8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://amzn.to/2V6yFR8&lt;/a&gt;) for my 2015.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I was able to dual boot my 2015 MacBook Pro with macOS/elementary OS but when I decided to resize my partitions to give elementary OS more space I was no longer able to boot macOS. I had backups so it wasn't a big deal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I later committed to elementary OS and wiped out the entire drive including the recovery partition. A few weeks later I decided to sell the MacBook and buy a new laptop and was able to do a remote recovery of macOS before selling.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-19T13:01:52.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22496" PostTypeId="1" CreationDate="2020-02-19T15:10:49.833" Score="1" ViewCount="1134" Body="&lt;p&gt;Okay, so ill cut this short.&#xA;I had switched from Windows 10 to elementaryOS because windows had gotten laggy. After switching, i realized there weren't a lot of games and couldn't use Wine so Ubuntu was my option. I installed Ubuntu on a USB with UNetbootin and tried to boot the USB drive. And the roadblock. When i manually booted via boot menu, the computer jumps right in to elementaryOS. I'm just looking for a solution to this problem.&lt;/p&gt;&#xA;" OwnerUserId="20732" LastEditorUserId="20732" LastEditDate="2020-02-20T17:00:37.877" LastActivityDate="2020-02-22T12:58:29.047" Title="How do i switch from elementaryOS to Ubuntu?" Tags="|boot|ubuntu|usb|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22497" PostTypeId="1" CreationDate="2020-02-19T15:23:29.927" Score="0" ViewCount="153" Body="&lt;p&gt;Not sure what's happening. eOS Hera 5.1 freezes at least once a day, sometimes more. It happens when all I have open is Firefox or Chrome. The cursor stops moving then all keys are unresponsive. All I can do is to force a shut down. Any ideas?&#xA;Thanks&#xA;Fred&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;No worries, I have now returned to Ubuntu 19.10 and it all works like a charm. No need to answer anymore&lt;/p&gt;&#xA;" OwnerUserId="16910" LastEditorUserId="16827" LastEditDate="2020-03-09T12:46:00.503" LastActivityDate="2024-03-18T22:03:20.397" Title="eOS Hera freezes, every day, several times a day" Tags="|system|release-hera|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22498" PostTypeId="1" CreationDate="2020-02-19T16:22:07.870" Score="1" ViewCount="39" Body="&lt;p&gt;I recently installed elementary OS Hera on a laptop that previously had KDE neon. A new issue has cropped up since changing distributions - there is a strange offset on external display for presentations.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I connect the laptop to an external display/projector using HDMI, the screen is correctly added - I can see my desktop's background on it perfectly fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem starts when I start a LibreOffice Impress presentation (slide show) - the display &quot;window&quot; showing the slide on the external display (while my laptop screen correctly shows the current and next slide) is offset slightly downwards from the top (where I can see a small strip of my desktop background). This chops off the bottom of the slide on display to the audience.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since the same hardware worked without problems with LibreOffice Impress in KDE Neon (which is also based on Ubuntu 18.04 LTS), the issue is neither with the hardware, nor with underlying Linux userland, nor with LibreOffice. The only thing that changed was the distribution (and the DE - switched from KDE to Pantheon, which has a lot of GTK stuff).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I make multiple presentations a week, this is getting to being more than a little vexing. elementary OS configuration screens are delightfully minimalistic and functional (reminiscent of Mac OSX that I was forced to migrate from), but have not yielded anything that seems relevant.&lt;/p&gt;&#xA;" OwnerUserId="20733" LastEditorUserId="20733" LastEditDate="2020-02-20T04:11:32.830" LastActivityDate="2020-02-20T04:11:32.830" Title="Offset on external display" Tags="|display|release-hera|libreoffice|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22500" PostTypeId="2" ParentId="22496" CreationDate="2020-02-19T19:36:53.907" Score="0" Body="&lt;p&gt;Seems you're problem is about the boot media, not about elementary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't use UNetbootin, which usually fails. Use &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Etcher&lt;/a&gt; which usually is better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Either way, elementaryOS is based on Ubuntu, so if anything runs on Ubuntu it runs on elementary. I use elementaryOS and play a lot of games in Steam via Proton (a utility developed by Valve to run games via Wine) and I'm very happy.&lt;/p&gt;&#xA;" OwnerUserId="20650" LastActivityDate="2020-02-19T19:36:53.907" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22502" PostTypeId="2" ParentId="21473" CreationDate="2020-02-19T22:06:04.010" Score="1" Body="&lt;p&gt;The easy fix is to create a folder named &lt;strong&gt;/casper&lt;/strong&gt; on the root of your USB drive and copy &lt;strong&gt;filesystem.squashfs&lt;/strong&gt; into that folder. It seems that they changed how the boot process is working between 5.0 and 5.1. &#xA;&lt;em&gt;Caveat, I've only tested this with the default install of glim, but it should work fine.   (github.com/thias/glim)&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shawn&lt;/p&gt;&#xA;&#xA;&lt;p&gt;issue:  Appears to be that &lt;strong&gt;&lt;em&gt;/casper&lt;/em&gt;&lt;/strong&gt; is hard coded and/or not respecting the $root/$loop variable(s). Probably is related to the recent switch towards using a pure Debian Live-build.  Lot's has changed since the prior build&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/wiki/Building-iso-Images&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/wiki/Building-iso-Images&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20737" LastEditorUserId="20737" LastEditDate="2020-02-19T22:11:55.737" LastActivityDate="2020-02-19T22:11:55.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22504" PostTypeId="1" CreationDate="2020-02-20T12:03:19.667" Score="0" ViewCount="419" Body="&lt;p&gt;Just did a fresh install of ElementaryOS Hera (5.1.2) and after updating, upgrading and installing some apps, also installing elementary-tweaks. I get this error (screenshot attached) and after removing all the custom added PPAs, cleaning the sources.list file and all, still can't fix the error, any help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additional information, i can search, find apps and see updates but i can't install any updates or new apps. I can install everything through the terminal but nothing from the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HKsqI.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HKsqI.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12254" LastActivityDate="2020-02-21T18:25:16.280" Title="Appcenter: Failed to obtain authentication" Tags="|appcenter|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22505" PostTypeId="1" CreationDate="2020-02-20T13:55:42.020" Score="1" ViewCount="72" Body="&lt;p&gt;I remember locking the laptop with Super+L and after I return and open it, it shows me the above mentioned black screen. So I forced shutdown and now restarting it always gives me black screen with an underscore(_).&lt;/p&gt;&#xA;" OwnerUserId="20741" LastActivityDate="2020-02-20T17:25:48.340" Title="Black Screen with an underscore at the top left of screen" Tags="|boot|black-screen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22506" PostTypeId="1" CreationDate="2020-02-20T14:33:35.717" Score="2" ViewCount="156" Body="&lt;p&gt;My old computer (also elementary OS Hera) was shared by my wife who has a guest user. I have purchased a new computer (also Hera installed) and would like to know how may I transfer the files/settings to create a new guest user in the new computer. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help!&lt;/p&gt;&#xA;" OwnerUserId="20743" LastActivityDate="2024-03-17T16:02:30.297" Title="Moving user to new computer?" Tags="|user|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22507" PostTypeId="2" ParentId="17368" CreationDate="2020-02-20T16:10:18.080" Score="0" Body="&lt;p&gt;If you're using Bash, then the trigger that fires off this notification comes from the PROMPT_COMMAND variable in your shell. There is a different implementation for each shell. You can easily disable the notifications for one session by running &lt;code&gt;unset PROMPT_COMMAND&lt;/code&gt; in the embedded terminal after it launches. Unfortunately this turns off whatever else you have configured in that variable, it is frequently used for dynamic prompts (like a git prompt). If you can identify those parts of PROMPT_COMMAND that you want to keep, you can edit the variable to remove the elementaryOs additions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make this persistent in vscode, you can use the &lt;code&gt;terminal.integrated.env.linux&lt;/code&gt; preference to set PROMPT_COMMAND how you like it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The elementary OS task finished notification specific part of the PROMPT_COMMAND is &lt;code&gt;dbus-send --type=method_call --session --dest=io.elementary.terminal /io/elementary/terminal io.elementary.terminal.ProcessFinished string:$PANTHEON_TERMINAL_ID string:&quot;$(history 1 | cut -c 8-)&quot; int32:$__bp_last_ret_value &amp;gt;/dev/null 2&amp;gt;&amp;amp;1&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="20742" LastEditorUserId="20742" LastEditDate="2020-02-20T16:23:56.943" LastActivityDate="2020-02-20T16:23:56.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22508" PostTypeId="2" ParentId="22505" CreationDate="2020-02-20T17:25:48.340" Score="1" Body="&lt;p&gt;I get the same thing but mine had to do with adding a 5600 xt and the radeon drivers in 5.3 not working. Installing 5.4 fixed the issue. Too do this boot to 5.1 and install ukuu and use it too install 5.4 I haven't tried 5.5.&lt;/p&gt;&#xA;" OwnerUserId="20746" LastActivityDate="2020-02-20T17:25:48.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22510" PostTypeId="2" ParentId="12548" CreationDate="2020-02-20T20:03:04.097" Score="2" Body="&lt;p&gt;This method taken from &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1#issuecomment-560757367&quot; rel=&quot;nofollow noreferrer&quot;&gt;this comment on Github&lt;/a&gt; worked for me on 5.1 Hera:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a &lt;code&gt;~/.config/gtk-3.0/gtk.css&lt;/code&gt; file&lt;/li&gt;&#xA;&lt;li&gt;Insert the below contents&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/* source: https://github.com/mdh34/elementary-indicators/issues/1 */&#xA;.composited-indicator {&#xA;    padding: 0 2px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Reboot your system&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The other methods above didn't work for me in Hera, as &lt;code&gt;.composited-indicator&lt;/code&gt; no longer exists within &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt;. This is probably a better method anyway, because &lt;code&gt;~/.config&lt;/code&gt; user config, and so is less likely to be reverted when Wingpanel or the theme is updated in the future.&lt;/p&gt;&#xA;" OwnerUserId="4466" LastActivityDate="2020-02-20T20:03:04.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22511" PostTypeId="2" ParentId="21087" CreationDate="2020-02-20T20:27:40.487" Score="2" Body="&lt;p&gt;This method taken from &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1#issuecomment-560757367&quot; rel=&quot;nofollow noreferrer&quot;&gt;this comment on Github&lt;/a&gt; worked for me on 5.1 Hera:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a &lt;code&gt;~/.config/gtk-3.0/gtk.css&lt;/code&gt; file&lt;/li&gt;&#xA;&lt;li&gt;Insert the below contents&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/* source: https://github.com/mdh34/elementary-indicators/issues/1 */&#xA;.composited-indicator {&#xA;    padding: 0 2px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Reboot your system&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;The other methods above didn't work for me in Hera, as &lt;code&gt;.composited-indicator&lt;/code&gt; no longer exists within &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt;. This is probably a better method anyway, because &lt;code&gt;~/.config&lt;/code&gt; user config, and so is less likely to be reverted when Wingpanel or the theme is updated in the future.&lt;/p&gt;&#xA;" OwnerUserId="4466" LastActivityDate="2020-02-20T20:27:40.487" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22512" PostTypeId="2" ParentId="22504" CreationDate="2020-02-21T00:47:51.440" Score="1" Body="&lt;p&gt;What worked for me: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logout&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reload AppCenter&lt;/p&gt;&#xA;" OwnerUserId="20751" LastEditorUserId="16827" LastEditDate="2020-02-21T18:25:16.280" LastActivityDate="2020-02-21T18:25:16.280" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22514" PostTypeId="1" CreationDate="2020-02-21T06:22:15.777" Score="1" ViewCount="70" Body="&lt;p&gt;Help me please? I have no way to set up a wired connection, if this connection doesn't have DHCP. How can I fix it? It doesn't have any settings button.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Wid1f.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Wid1f.png&quot; alt=&quot;check this&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20752" LastActivityDate="2020-02-21T06:22:15.777" Title="wired connection problem" Tags="|settings|networking|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22516" PostTypeId="1" CreationDate="2020-02-21T08:52:15.517" Score="1" ViewCount="14" Body="&lt;p&gt;after I installed MS SQL and Flutter, on my freshly installed Elementary OS, and after the installations, I can't run any commands on my terminal.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cTJVT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cTJVT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It happens with every command I try to execute such as &quot;apt update&quot;, &quot;cd&quot; etc. I added some paths to my .bashrc file for Flutter and MS SQL but now i can't remove them, What can i do to fix it?&lt;/p&gt;&#xA;" OwnerUserId="20753" LastActivityDate="2020-02-21T08:52:15.517" Title="Terminal can't execute commands" Tags="|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22517" PostTypeId="2" ParentId="22496" CreationDate="2020-02-21T13:30:45.243" Score="0" Body="&lt;p&gt;I'll echo babel's comments.  I haven't found anything in a debian or ubuntu package that doesn't install in elementary.  I think wine is even in the App Center.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, I did a lot of distro hopping before settling on elementary OS and I often find that nothing will work.  Just a few days ago I had to wipe a drive that had OpenSUSE on it to install elementary OS.  It SHOULD have worked by booting from the USB, but it didn't despite all the fiddling around with the BIOS.  I've found this on all kinds of distros.  I've had the same USB work on one computer and not another.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In short, and assuming you have exhausted the options in your BIOS, wipe the destination drive and try again.&lt;/p&gt;&#xA;" OwnerUserId="20712" LastActivityDate="2020-02-21T13:30:45.243" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22518" PostTypeId="1" CreationDate="2020-02-21T15:29:40.150" Score="0" ViewCount="165" Body="&lt;p&gt;Tried to install Arduino IDE on Juno, install script gave warnings about icons not being installed on desktop (which is fine since no desktop folder for eOS) but then when try to launch the IDE icon from Applications it doesn't go. I'm guessing it's a java app? I don't want to run java on eOS unless it's already there. Any insight to running this IDE on Juno would be welcome.&lt;/p&gt;&#xA;" OwnerUserId="16082" LastActivityDate="2024-03-09T18:06:45.797" Title="Arduino IDE on eOS? Java?" Tags="|release-juno|ide|java|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22519" PostTypeId="1" CreationDate="2020-02-21T18:57:49.043" Score="1" ViewCount="123" Body="&lt;p&gt;Ill cut this short again.&#xA;Okay, so, I was wondering about trying Ubuntu without installing so i tried. And then the PC boots elementaryOS, no isolinux.bin error which had happened before. I used Startup Disk Creator (installed via Terminal) to burn the iso file to the usb, seems like it worked. My question is, Does anyone know how to boot another OS via USB? elementaryOS is my primary system.&lt;/p&gt;&#xA;" OwnerUserId="20732" LastActivityDate="2024-03-22T03:09:21.030" Title="Unable to boot USB drive" Tags="|boot|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22521" PostTypeId="2" ParentId="22518" CreationDate="2020-02-21T21:07:53.913" Score="0" Body="&lt;p&gt;I am using the Flatpak version of the Arduino IDE and since it comes with it's own runtime you don't have to have Java or any icons installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case you need them:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installing flatpak on elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/apps/details/cc.arduino.arduinoide&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arduino IDE on Flathub&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-02-21T21:07:53.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22523" PostTypeId="1" CreationDate="2020-02-22T01:31:31.627" Score="2" ViewCount="562" Body="&lt;p&gt;Since switching from Windows a few weeks ago, I've been using eOS on this laptop without issue. However, after downloading system updates a couple of days ago, the system wouldn't boot, hanging on a black screen and never making it to the eOS logo. I reinstalled the OS, and it booted fine. However, once I downloaded system updates, the issue reappeared. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I use recovery mode, it boots successfully. If I do a fresh install using the most recent iso and don't install third-party drivers or system updates, it boots successfully. If I install third-party drivers during the installation process, or if I download system updates after booting, the next boot fails.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The laptop has Ryzen 3 3200u with Radeon Vega 3 graphics.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any and all help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="20761" LastActivityDate="2023-12-11T13:08:10.980" Title="eOS won't boot, stuck on perpetual black screen" Tags="|updates|boot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22524" PostTypeId="1" CreationDate="2020-02-22T09:27:42.193" Score="0" ViewCount="525" Body="&lt;p&gt;I have NVIDIA GTX 1050 TI with proprietary driver version 440.59.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I got screen tearing when using 3D apps like Maya and Blender 3D. Same problem when playing videos with vlc or in Youtube.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried follow some articles but no one can fix it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Solution i've tried:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Enabling &lt;strong&gt;Force Full Composition Pipeline&lt;/strong&gt; in &lt;em&gt;Nvidia-Settings&lt;/em&gt;. It seem this work. Screen tearing is disappear. But I'm playing DOTA 2 in this OS. Enabling this thing make the game stutters. It shows 60fps but it feel really like 20-40fps. &#xA;But, if i disabling this &lt;strong&gt;Force Full Composition Pipeline&lt;/strong&gt;, the game play so smoothly on 60fps. And then the screen tearing happen again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;So, is there any solution? new solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I have Fedora 31 too on my PC (Dual booting). With Pantheon DE on it, same nvidia driver version. &lt;strong&gt;Force Composition Pipeline&lt;/strong&gt; Enabled. The game play smoothly and stable on 60 fps. No screen tearing too.&lt;/p&gt;&#xA;" OwnerUserId="19908" LastActivityDate="2024-03-04T21:00:50.087" Title="Elementary OS 5.1 Hera Screen Tearing" Tags="|nvidia|games|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22525" PostTypeId="2" ParentId="22506" CreationDate="2020-02-22T10:03:58.373" Score="0" Body="&lt;p&gt;Have you already activated the standard &quot;guest user&quot; in the settings of your new computer ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;OR has your wife her own account on your old computer ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I asume the best solution for you would be to create a dedicated account for your wife on BOTH computers and use the standard &quot;guest user&quot; only for random guests which you want to allow to use your computers … usually the settings of the standard &quot;guest user&quot; are reset WHENEVER someone uses this &quot;guest user&quot;, so I dont see any sense in transfering settings of &quot;guest user&quot; from one computer to another computer.&lt;/p&gt;&#xA;" OwnerUserId="20760" LastActivityDate="2020-02-22T10:03:58.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22526" PostTypeId="2" ParentId="22496" CreationDate="2020-02-22T12:53:25.080" Score="2" Body="&lt;p&gt;First, don't use unetbootin unless a distro specifically requests it. On Linux, your best bet is to just use DD (google how to do it with an iso), or use gnome disk utility (google it as well), or BalenaEtcher. On Windows, use Rufus, or again, use whatever method the install guide for the Distro recommends. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Secondly, Elementary is based on Ubuntu LTS. Anything that works on Ubuntu, works on eOS (usually except the occasional bugs). I've personally had no issues installing Wine, Lutris, and Steam on eOS. Both Lutris and Wine has install guides how to do it.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-02-22T12:58:29.047" LastActivityDate="2020-02-22T12:58:29.047" CommentCount="14" ContentLicense="CC BY-SA 4.0" />
  <row Id="22528" PostTypeId="2" ParentId="10093" CreationDate="2020-02-22T23:37:27.177" Score="1" Body="&lt;p&gt;Systems with LVM partition enabled experience no timeout changes when setting GRUB_TIMEOUT. The reason is that grub lacks write support for LVM. Further info you can find at &lt;a href=&quot;https://askubuntu.com/questions/1120948/grub-recordfail-broken-regarding-lvm&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Adding a timeout for recordFail at /etc/default/grub in Grub should solve your issue:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c 'echo GRUB_RECORDFAIL_TIMEOUT=0 &amp;gt;&amp;gt; /etc/default/grub'&#xA;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will add GRUB_RECORDFAIL_TIMEOUT=0 to /etc/default/grub file&lt;/p&gt;&#xA;" OwnerUserId="20768" LastActivityDate="2020-02-22T23:37:27.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22529" PostTypeId="1" CreationDate="2020-02-23T10:42:06.733" Score="0" ViewCount="67" Body="&lt;p&gt;Following one of the latest updates (I had a few pending, so not sure which one), my touchpad is acting a bit weird.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On boot and first login, everything works fine. When the screen locks and I log in again, some touchpad features do not work anymore:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Two finger scrolling&lt;/li&gt;&#xA;&lt;li&gt;Right click with 2 fingers&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I updated to a newer kernel following another &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21492/trackpad-breaks-on-upgrade-to-5-1&quot;&gt;post&lt;/a&gt; in the forum, since I had noticed that my kernel was way behind. This is the current situation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sYZwt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sYZwt.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure want to do. Any tips?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="17172" LastEditorUserId="17172" LastEditDate="2020-02-27T22:13:39.310" LastActivityDate="2020-02-27T22:13:39.310" Title="Touchpad not working upon re-login - X1 Carbon" Tags="|updates|touchpad|lenovo|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22531" PostTypeId="2" ParentId="21863" CreationDate="2020-02-23T13:31:20.363" Score="1" Body="&lt;p&gt;This one:&#xA;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu bionic Release' does not have a Release file.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Seems like a fairly old Elementary-tweaks ppa to me. It's erroring because it's not really up and running for Ubuntu Bionic.&#xA;Taking a quick look over the launchpad says it doesn't work for anything over eOS Freya(0.3), you should remove it with &lt;code&gt;sudo add-apt-repository --remove ppa:mpstark/elementary-tweaks-daily&lt;/code&gt; followed by &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The other one you added works fine for me on Hera 5.1&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-02-23T13:43:58.303" LastActivityDate="2020-02-23T13:43:58.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22533" PostTypeId="1" AcceptedAnswerId="22544" CreationDate="2020-02-23T15:03:27.470" Score="2" ViewCount="60" Body="&lt;p&gt;Trying to compile &lt;a href=&quot;https://gitlab.com/gavr123456789/vala-snippets/-/tree/master/Fast-Examples/DazzleChart&quot; rel=&quot;nofollow noreferrer&quot;&gt;this simple example&lt;/a&gt;, but having this error when trying to run &lt;code&gt;exec&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/projects/vala-snippets/Fast-Examples/DazzleChart(master ✔) meson build&#xA;The Meson build system&#xA;Version: 0.49.2&#xA;Source dir: /home/stsdc/projects/vala-snippets/Fast-Examples/DazzleChart&#xA;Build dir: /home/stsdc/projects/vala-snippets/Fast-Examples/DazzleChart/build&#xA;Build type: native build&#xA;Project name: exec&#xA;Project version: undefined&#xA;Native C compiler: ccache cc (gcc 7.4.0 &quot;cc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0&quot;)&#xA;Native Vala compiler: valac (valac 0.40.19)&#xA;Build machine cpu family: x86_64&#xA;Build machine cpu: x86_64&#xA;Found pkg-config: /usr/bin/pkg-config (0.29.1)&#xA;Dependency glib-2.0 found: YES 2.56.4&#xA;Dependency libdazzle-1.0 found: YES 3.35.3&#xA;Build targets in project: 1&#xA;Found ninja-1.8.2 at /usr/bin/ninja&#xA;~/projects/vala-snippets/Fast-Examples/DazzleChart(master ✗) cd build &#xA;~/projects/vala-snippets/Fast-Examples/DazzleChart/build(master ✗) ninja&#xA;[3/3] Linking target exec.&#xA;~/projects/vala-snippets/Fast-Examples/DazzleChart/build(master ✗) ./exec&#xA;./exec: symbol lookup error: ./exec: undefined symbol: dzl_graph_view_model_iter_set_value&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="7394" LastActivityDate="2020-02-26T19:24:05.087" Title="Symbol lookup error" Tags="|vala|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22537" PostTypeId="1" CreationDate="2020-02-24T01:01:49.160" Score="1" ViewCount="209" Body="&lt;p&gt;I have searched through a variety of resources (both here and elsewhere) and cannot find anything constructive or concrete on installing flash player for elementary 5.1. I was wondering if anyone (surely someone must have done it - and it's probably trivially easy) has any advice on this.&lt;/p&gt;&#xA;" OwnerUserId="20775" LastActivityDate="2020-05-31T10:09:51.177" Title="Installing flash player on Elementary 5.1?" Tags="|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22538" PostTypeId="1" CreationDate="2020-02-24T01:10:41.583" Score="1" ViewCount="65" Body="&lt;p&gt;I just installed elementary OS 5.1.2 Hera, and noticed that whenever I boot up, the system time is wrong, and it takes about a minute to automatically correct. This is an issue me because I use the Nigh Light feature and this causes it to be active even when it should not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd gladly appreciate if someone could point me out towards a solution.&lt;/p&gt;&#xA;" OwnerUserId="20776" LastActivityDate="2020-02-24T01:10:41.583" Title="Wrong system time on startup" Tags="|boot|time|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22539" PostTypeId="2" ParentId="22537" CreationDate="2020-02-24T07:55:55.290" Score="2" Body="&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&#xA;sudo add-apt-repository &quot;deb http://archive.canonical.com/ bionic partner&quot;&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install adobe-flashplugin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The &lt;code&gt;adobe-flashplugin&lt;/code&gt; includes support for both CHromium and Firefox.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-05-31T10:09:51.177" LastActivityDate="2020-05-31T10:09:51.177" CommentCount="6" CommunityOwnedDate="2020-02-24T10:30:26.083" ContentLicense="CC BY-SA 4.0" />
  <row Id="22540" PostTypeId="2" ParentId="22524" CreationDate="2020-02-24T09:47:33.877" Score="0" Body="&lt;p&gt;Sorry I can't help with this, but have you checked out if anything on &lt;a href=&quot;https://wiki.archlinux.org/index.php/NVIDIA/Troubleshooting&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/NVIDIA/Troubleshooting&lt;/a&gt; may be of help?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On a side note: How well does Pantheon work on F31, I was under the impression it didn't quite work in F31? I love the DE, but eOS has so many goddamn bugs, and the devs seem way more interested in making stuff they can slap a pricetag on, than actually fixing their shitty OS.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastActivityDate="2020-02-24T09:47:33.877" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22542" PostTypeId="1" AcceptedAnswerId="22632" CreationDate="2020-02-24T13:11:11.517" Score="1" ViewCount="179" Body="&lt;p&gt;How do I select English International as my keyboard layout? It does not appear in &lt;code&gt;System Settings &amp;gt; Keyboard&lt;/code&gt; when I click on &lt;code&gt;+&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/0nWRx.png&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="5133" LastEditorUserId="84" LastEditDate="2021-07-27T21:11:11.400" LastActivityDate="2021-07-27T21:11:11.400" Title="How to select US International as keyboard layout?" Tags="|release-hera|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22543" PostTypeId="1" CreationDate="2020-02-24T15:41:50.650" Score="1" ViewCount="25" Body="&lt;p&gt;I've searched for a fix and it seems like this was last addressed a few years back, and was supposed to have been patched? But every time I join a voice call in Discord, the top bar freezes. Time doesn't change, can't access launcher, the color of the bar doesn't change according to the app, etc. I have to restart it via terminal every time and it only lasts a minute at most before it freezes again. As soon as I hang up though, everything works again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this a known issue and is there a fix for it? I'm really tired of having to kill wingpanel in terminal every few minutes if I need to open another app while calling my friends. This happened when I was on juno and continues to happen in hera.&lt;/p&gt;&#xA;" OwnerUserId="15123" LastActivityDate="2020-02-24T15:41:50.650" Title="Wingpanel freezes during Discord voice calls" Tags="|release-juno|release-hera|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22544" PostTypeId="2" ParentId="22533" CreationDate="2020-02-24T18:37:57.493" Score="0" Body="&lt;p&gt;There was an old &lt;code&gt;libdazzle-1.0.so&lt;/code&gt; in &lt;code&gt;/usr/lib/x86_64-linux-gnu&lt;/code&gt;. pkg-config used it instead of freshly compiled version 3.35.3, which was installed at &lt;code&gt;/usr/local/lib/x86_64-linux-gnu&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Removed one at &lt;code&gt;/usr/local/lib/x86_64-linux-gnu&lt;/code&gt; and now it works.&lt;/p&gt;&#xA;" OwnerUserId="7394" LastEditorUserId="7394" LastEditDate="2020-02-26T19:24:05.087" LastActivityDate="2020-02-26T19:24:05.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22546" PostTypeId="1" CreationDate="2020-02-24T20:31:20.537" Score="0" ViewCount="119" Body="&lt;p&gt;I am no fan of google services, but in the meantime until I mount my own CalDav server I still need some kind of calendar synchronization between my devices. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried then to connect Elementary OS default calendar app to my gmail account, but when I did so start receiving warning messages from Google that the service that was trying to access my data is unsafe and the request was blocked. Anyone know what kind of security flaw the calendar app is presenting? Are there any plans to repair it?&lt;/p&gt;&#xA;" OwnerUserId="20781" LastActivityDate="2024-03-09T21:01:05.137" Title="Calendar security" Tags="|calendar|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22547" PostTypeId="1" CreationDate="2020-02-24T21:51:00.280" Score="1" ViewCount="1312" Body="&lt;p&gt;I have a Lenovo T440p and I previously had the fingerprint scanner installed on Mint 19.3. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to reinstall it using the same sudo commands and it came back with a repository not found message. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Has anyone tried installing fingerprint scanner with elementary os? If so, how did you get it to work. Thanks.&lt;/p&gt;&#xA;" OwnerUserId="20784" LastActivityDate="2020-02-24T21:51:00.280" Title="How to install fingerprint scanner" Tags="|keyboard|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22549" PostTypeId="1" CreationDate="2020-02-25T08:04:55.433" Score="2" ViewCount="446" Body="&lt;p&gt;On my laptop, after waking from suspend, the WiFi does not connect and does not find any. And while trying to fix the problem, I found out that &lt;code&gt;sudo&lt;/code&gt; commands in the terminal would not execute either. (just executing &lt;code&gt;sudo&lt;/code&gt; results in the terminal doing nothing. No password prompts, no output.)&lt;/p&gt;&#xA;&lt;p&gt;I also had this issue with Linux Mint 19.2 and 19.3. I'd really like to know if there is a fix for this?&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 5.1.2 Hera&lt;/p&gt;&#xA;&lt;p&gt;EDIT (more info as per comment):&lt;/p&gt;&#xA;&lt;p&gt;Waiting 5 minutes did not work, when I went into System Settings &amp;gt; Network, Wireless was displaying 'Failed'. When I tried to turn it off, then turn it on, System Settings froze. &lt;code&gt;lshw -c Network&lt;/code&gt; command also did not display anything beyond the following then hung&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: you should run this program as super-user.&#xA;Network Interfaces&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The output of &lt;code&gt;lshw -c Network&lt;/code&gt; after rebooting:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;WARNING: you should run this program as super-user.&#xA;  *-network                 &#xA;       description: Wireless interface&#xA;       product: QCA6174 802.11ac Wireless Network Adapter&#xA;       vendor: Qualcomm Atheros&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       logical name: wlp1s0&#xA;       version: 20&#xA;       serial: 5c:93:a2:9a:76:33&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=ath10k_pci driverversion=5.3.0-40-generic firmware=SW_RM.1.1.1-00157-QCARMSWPZ-1 ip=192.168.123.170 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:50 memory:f7000000-f71fffff&#xA;  *-network&#xA;       description: Ethernet interface&#xA;       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: enp2s0&#xA;       version: 0c&#xA;       serial: 24:f5:aa:d0:9d:12&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 firmware=rtl8168g-2_0.0.1 02/06/13 latency=0 link=no multicast=yes port=MII&#xA;       resources: irq:19 ioport:e000(size=256) memory:f7200000-f7200fff memory:f0000000-f0003fff&#xA;WARNING: output may be incomplete or inaccurate, you should run this program as super-user.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;running it in &lt;code&gt;sudo&lt;/code&gt; mode had two different lines as following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;(Wireless interface)&#xA;capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;(Ethernet interface)&#xA;capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20785" LastEditorUserId="9445" LastEditDate="2021-05-15T21:36:47.527" LastActivityDate="2021-05-15T21:36:47.527" Title="Problem after suspend: sudo command doesn't work, wifi does not connect" Tags="|wifi|suspend|" AnswerCount="3" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22551" PostTypeId="1" CreationDate="2020-02-25T13:30:57.473" Score="1" ViewCount="40" Body="&lt;p&gt;I have tried a lot of distro on my machine, seems Eos only has this problem. why can't it wake up from suspend? tried googling it, didn't find any answer. the machine is a HP pavilion g4 laptop. graphics driver are installed. average linux user here.&lt;/p&gt;&#xA;" OwnerUserId="20787" LastActivityDate="2020-02-25T13:30:57.473" Title="suspend problem" Tags="|suspend|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22552" PostTypeId="2" ParentId="22549" CreationDate="2020-02-25T13:41:41.840" Score="0" Body="&lt;p&gt;This always happen. suspend bug(after a long suspend state, 1hr or more). all ubuntu based distro i've tried have this too. reboot and it all will be ok(atleast in my experience).....&lt;/p&gt;&#xA;" OwnerUserId="20787" LastActivityDate="2020-02-25T13:41:41.840" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22553" PostTypeId="1" AcceptedAnswerId="22554" CreationDate="2020-02-25T14:16:16.303" Score="0" ViewCount="1460" Body="&lt;p&gt;I'm running eOS 5.1.2 and using a MX Master 2s connected via Bluetooth. I like to assign he thumb button to &quot;Show All Windows&quot;. &#xA;Usually it can be done with assign a new button in the keyboard shortcuts. And when I press the button it actually shows up Ctrl+Alt+Tab (which is the normal combination triggered in Linux). However, when this key combination is assigned nothing happens when pressing them, either on the mouse nor on the keyboard itself. &#xA;Is there something else assigned to this combination in eOS, which prevents the function from working?&lt;/p&gt;&#xA;" OwnerUserId="20778" LastActivityDate="2020-02-25T14:24:17.410" Title="Logitech MX Master 2s - How to assign thumb button?" Tags="|keyboard-shortcuts|release-hera|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22554" PostTypeId="2" ParentId="22553" CreationDate="2020-02-25T14:24:17.410" Score="0" Body="&lt;p&gt;Found the solution to the problem. in this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19289/rebind-ctrlalttab&quot;&gt;post&lt;/a&gt;&#xA;Thanks &lt;a href=&quot;https://elementaryos.stackexchange.com/users/18493/erik-abramczyk&quot;&gt;Erik&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here the procedure in short:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;I found the setting using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-recursively | grep -i Tab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;  &#xA;  &lt;p&gt;and replaced it by using&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.wm.keybindings switch-panels &quot;['&amp;lt;Control&amp;gt;&amp;lt;Alt&amp;gt;&amp;lt;Super&amp;gt;Tab']&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="20778" LastActivityDate="2020-02-25T14:24:17.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22555" PostTypeId="2" ParentId="22549" CreationDate="2020-02-25T17:17:41.300" Score="1" Body="&lt;p&gt;Seems like the problem is that the Wireless card isn't capable of waking up after suspend. We are going to create a service that disables the wireless card on suspend and then enables it again when you start the computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First, open a terminal window and execute the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo io.elementary.code /etc/systemd/system/network-suspend.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On the window that opens, paste the following code and then close the window:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#/etc/systemd/system/network-suspend.service&#xA;#sudo systemctl enable network-suspend.service&#xA;#sudo systemctl start network-suspend.service&#xA;#sudo systemctl status network-suspend.service&#xA;#sudo systemctl daemon-reload&#xA;[Unit]&#xA;Description=Network suspend service &#xA;Before=sleep.target&#xA;StopWhenUnneeded=yes&#xA;&#xA;[Service]&#xA;User=root&#xA;Type=oneshot&#xA;RemainAfterExit=yes&#xA;ExecStart=/usr/bin/sudo -u $USER /bin/bash -lc 'nmcli networking off'&#xA;ExecStart=/bin/sleep 1&#xA;ExecStart=/usr/bin/systemctl stop NetworkManager&#xA;ExecStart=/bin/sleep 1&#xA;ExecStart=/usr/bin/ip link set wlp1s0  down&#xA;ExecStart=/bin/sleep 1&#xA;ExecStart=/usr/bin/rmmod  ath10k_pci&#xA;ExecStart=/bin/sleep 1&#xA;ExecStartPost=/usr/bin/rmmod  ath10k_core&#xA;&#xA;[Install]&#xA;WantedBy=sleep.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now type on terminal again:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo io.elementary.code /etc/systemd/system/network-resume.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And paste the following code. Close the window.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#/etc/systemd/system/network-resume.service&#xA;#sudo systemctl enable network-resume.service&#xA;#sudo systemctl start network-resume.service&#xA;#sudo systemctl status network-resume.service&#xA;#sudo systemctl daemon-reload&#xA;[Unit]&#xA;Description=Network resume service&#xA;After=suspend.target&#xA;StopWhenUnneeded=yes&#xA;&#xA;[Service]&#xA;User=root&#xA;Type=oneshot&#xA;RemainAfterExit=yes&#xA;ExecStartPre=/bin/sleep 10&#xA;ExecStart=/sbin/modprobe ath10k_pci&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/sbin/modprobe ath10k_core&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/usr/bin/ip link set wlp1s0 up&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/usr/bin/systemctl start NetworkManager&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/usr/bin/sudo -u $USER /bin/bash -lc 'nmcli networking on'&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/usr/bin/sudo -u $USER /bin/bash -lc 'nmcli r wifi off'&#xA;ExecStart=/bin/sleep 2&#xA;ExecStart=/usr/bin/sudo -u $USER /bin/bash -lc 'nmcli r wifi on'&#xA;&#xA;[Install]&#xA;WantedBy=suspend.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Lastly, execute all of this on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl enable network-resume.service &amp;amp;&amp;amp; sudo systemctl start network-resume.service &amp;amp;&amp;amp; sudo systemctl enable network-suspend.service &amp;amp;&amp;amp; sudo systemctl start network-suspend.service &amp;amp;&amp;amp; sudo systemctl daemon-reload&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And done! It should work now. It shouldn't be necessary to reboot but it won't hurt anyway!.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forum.manjaro.org/t/solved-qca6174-freez-after-suspend/66232/12&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want to remove this service (because it didn't work or any other reason) just execute on terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl disable network-resume.service &amp;amp;&amp;amp; sudo systemctl disable network-suspend.service &amp;amp;&amp;amp; sudo systemctl daemon-reload &amp;amp;&amp;amp; sudo rm /etc/systemd/system/network-suspend.service &amp;amp;&amp;amp; sudo rm /etc/systemd/system/network-resume.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="3018" LastEditDate="2020-02-26T21:30:48.737" LastActivityDate="2020-02-26T21:30:48.737" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22558" PostTypeId="2" ParentId="22523" CreationDate="2020-02-25T22:46:42.897" Score="0" Body="&lt;p&gt;i just experienced the same today after performing a log in, the black screen appeared, I left the black screen for about 5 min while pressing random keys on the KB and after a while the desktop came up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently using it normally haven't tried to reboot yet.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's possible that yesterdays updates may have been finalizing after the power up/ reboot and had taken a while to complete.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Will test again this afternoon and if the problem persists will report back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A complete reinstall is a little over kill there are other methods of troubleshooting that should be tried 1st before resorting to a full reinstall.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;&quot;Cheers&#xA;G&lt;/p&gt;&#xA;" OwnerUserId="18833" LastActivityDate="2020-02-25T22:46:42.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22559" PostTypeId="1" CreationDate="2020-02-26T09:45:54.023" Score="1" ViewCount="107" Body="&lt;p&gt;I have an account with windscribe vpn.&#xA;Using their CLI app works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have setup the same connection through network-manager (for convenience) using keys, certs, credentials etc supplied from their openVPN Config setup page &lt;a href=&quot;https://windscribe.com/getconfig/openvpn&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://windscribe.com/getconfig/openvpn&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All seems well, get successful connection message but no actual internet access, and vpn disconnects after 60 seconds or so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Windscribe support say the problem is with failed API calls from elementary's network-manager.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my question is where do I start to troubleshoot this issue? /var/log/openvpn folder is empty. I have no internal firewall running, and no router, as only mobile data (tethered wifi). If it all works through CLI, then I would think it should also work through network-manager, or am I missing something?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Cheers for any suggestions.&lt;/p&gt;&#xA;" OwnerUserId="20791" LastActivityDate="2024-02-15T03:08:51.097" Title="troubleshoot openvpn connection" Tags="|openvpn|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22560" PostTypeId="1" CreationDate="2020-02-26T11:45:03.733" Score="0" ViewCount="113" Body="&lt;p&gt;Is it possible in elementary OS 5.1 Hera to display a website as wallpaper? I'd love to render &lt;a href=&quot;https://wall.marco.betschart.name/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wall.marco.betschart.name/&lt;/a&gt; as my dynamically changing wallpaper, but I'm not able to figure out how.&lt;/p&gt;&#xA;" OwnerUserId="5133" LastEditorUserId="15904" LastEditDate="2020-06-01T07:59:56.870" LastActivityDate="2024-02-11T17:01:30.173" Title="Display website as wallpaper?" Tags="|release-hera|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22561" PostTypeId="1" CreationDate="2020-02-26T15:30:42.437" Score="0" ViewCount="301" Body="&lt;p&gt;With &lt;a href=&quot;https://forum.manjaro.org/t/missing-geary-contacts-suggestions/126234/3&quot; rel=&quot;nofollow noreferrer&quot;&gt;greetings from Fabby&lt;/a&gt;, I was referred to the elementary forums for this issue I am having with Geary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Geary version 34.3, it &lt;a href=&quot;https://www.omgubuntu.co.uk/2019/09/geary-3-34-release-new-features&quot; rel=&quot;nofollow noreferrer&quot;&gt;should make use of Gnome Contacts&lt;/a&gt; list. However, it doesn't show me any suggestions either from the contact list or from the history of used mail addresses.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am using&#xA;Manjaro Gnome Stable.&#xA;Geary is 3.34.2 (tags/3.34.2-0-g5b5d6d94)&#xA;Gnome Contacts, version 3.34.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="13020" LastActivityDate="2020-11-22T19:06:15.820" Title="Geary doesn't use Gnome Contacts or history for email addresses" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22562" PostTypeId="2" ParentId="22561" CreationDate="2020-02-26T16:20:08.547" Score="1" Body="&lt;p&gt;Ok, I found the answer myself. I swithed on Wayland in the Manjaro settings. Apparently (apart from some applications that stopped working) this functionality stopped functioning. I switched Wayland off and now everything works normal again.&lt;/p&gt;&#xA;" OwnerUserId="13020" LastActivityDate="2020-02-26T16:20:08.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22564" PostTypeId="1" CreationDate="2020-02-26T17:50:04.077" Score="1" ViewCount="13" Body="&lt;p&gt;help me please !&#xA;I don't know how to describe the problem. look at the title of files and tabs&#xA;Thank You .&#xA;Elementary OS 5.0 Juno&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/w3n0c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w3n0c.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20797" LastActivityDate="2020-02-26T17:50:04.077" Title="Bad title displaying of my files" Tags="|display|settings|language|" AnswerCount="0" CommentCount="0" ClosedDate="2020-02-27T16:37:07.390" ContentLicense="CC BY-SA 4.0" />
  <row Id="22567" PostTypeId="2" ParentId="21421" CreationDate="2020-02-26T20:46:39.510" Score="1" Body="&lt;p&gt;I had this same problem and I fixed it by just manually creating a ~/.chrome-remote-desktop-sessions config file with my default gnome session preferences in there (See step 3 of google's support page here: &lt;a href=&quot;https://support.google.com/chromebook/answer/1649523?co=GENIE.Platform%3DDesktop&amp;amp;hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/chromebook/answer/1649523?co=GENIE.Platform%3DDesktop&amp;amp;hl=en&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="20801" LastActivityDate="2020-02-26T20:46:39.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22569" PostTypeId="1" CreationDate="2020-02-27T04:31:22.697" Score="0" ViewCount="37" Body="&lt;p&gt;I after a system update when i restarted my computer cant login in my main account. After i type the password screen goes black and throw me again at login screen. I cant  login with as guest because its the same error&#xA;how can i enter in my account ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GqVGD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GqVGD.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20804" LastActivityDate="2020-02-27T04:31:22.697" Title="Cant Login after update to the last version of greeter" Tags="|greeter|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22570" PostTypeId="2" ParentId="21362" CreationDate="2020-02-27T14:00:38.160" Score="0" Body="&lt;p&gt;What method are you using to change the icons? I recommend using Elementary Tweaks &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2020-02-27T14:00:38.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22571" PostTypeId="2" ParentId="22523" CreationDate="2020-02-27T14:05:59.553" Score="0" Body="&lt;p&gt;First unplug all USB devices and try to boot again. I had a similar thing happen and it turned out to be my USB midi controller keeping it from booting for some reason. If that makes no difference, boot into recovery mode and disable the boot splash screen following the directions at &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2019/06/disable-purple-splash-screen-boot-ubuntu-18-04-higher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2019/06/disable-purple-splash-screen-boot-ubuntu-18-04-higher/&lt;/a&gt;&#xA;This way you will have a clearer picture as to what the system is hanging on while booting. &lt;/p&gt;&#xA;" OwnerUserId="4757" LastActivityDate="2020-02-27T14:05:59.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22572" PostTypeId="2" ParentId="21607" CreationDate="2020-02-27T14:18:08.473" Score="0" Body="&lt;p&gt;They fix it with an update. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks everybody&lt;/p&gt;&#xA;" OwnerUserId="19841" LastActivityDate="2020-02-27T14:18:08.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22573" PostTypeId="1" CreationDate="2020-02-27T16:06:55.123" Score="1" ViewCount="61" Body="&lt;p&gt;I have installed elementary os with a dual boot on my laptop. Nevertheless, I can't connect my computer to the wifi because the wireless icon doesn't appear in settings.&#xA;I've look in the web but I haven't find a working solution.&#xA; Do you have any idea to help me please ?&lt;/p&gt;&#xA;" OwnerUserId="20808" LastActivityDate="2024-04-06T00:08:06.047" Title="Wireless doesn't appear on my device" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22575" PostTypeId="1" CreationDate="2020-02-27T22:34:04.597" Score="1" ViewCount="885" Body="&lt;p&gt;Has anybody got xrdp to work with 5.1 and if so how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried:&#xA;apt install xrdp&#xA;apt install xorgxrdp-hwe-18.04&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ufw allow 3389/tcp&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And all I get is a blank screen. I can get xrdp to work on other flavors of Ubuntu,but no joy with this one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Many thanks&#xA;Chirs&lt;/p&gt;&#xA;" OwnerUserId="20813" LastEditorUserId="15904" LastEditDate="2020-02-28T04:34:40.100" LastActivityDate="2021-02-14T02:41:01.263" Title="XRDP Elementary 5.1" Tags="|release-hera|rdp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22576" PostTypeId="1" CreationDate="2020-02-28T01:20:07.710" Score="0" ViewCount="45" Body="&lt;p&gt;I am running the latest version of Elementary, I am new to Linux, I want to run Wine but every time I install it through the official store it installs normal but it is not listed in the application menu, even though it is listed in the installed list. I always keep the system up to date. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="20016" LastEditorUserId="20016" LastEditDate="2020-02-28T19:42:09.810" LastActivityDate="2020-07-28T13:01:35.223" Title="Problem to run Wine from the store" Tags="|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22577" PostTypeId="1" CreationDate="2020-02-28T01:23:40.577" Score="1" ViewCount="48" Body="&lt;p&gt;so i tried out elementary for the first time on my main PC as i have been really liking what the team has been doing. I elected to install third part drivers upon install, and when it loaded i saw that the nvidia drivers were there, however i could not get a normal screen res. it listed only a 720x 640 or something, not 1080 or 2k to match my screen. im not having any black screen issues or the tearing/flashing reported in other posts. Just stuck at low res&lt;/p&gt;&#xA;&#xA;&lt;p&gt;i tried a few things including adding some other PPAs, but nothing would let me change the resolution. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;system is an i5 8600k with GTX 1080&#xA;Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="20814" LastActivityDate="2020-02-28T01:23:40.577" Title="install issue with nvidia drivers and low resolution" Tags="|nvidia|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22578" PostTypeId="1" CreationDate="2020-02-28T07:48:47.580" Score="0" ViewCount="130" Body="&lt;p&gt;E: The repository 'cdrom://elementary OS 5.1 &lt;em&gt;hera&lt;/em&gt; - stable amd64 (20200204) bionic Release' does not have a Release file.&lt;/p&gt;&#xA;" OwnerUserId="20817" LastActivityDate="2020-02-28T11:03:40.077" Title="i can't update anymore with the App store" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22579" PostTypeId="1" CreationDate="2020-02-28T09:09:27.233" Score="0" ViewCount="159" Body="&lt;p&gt;I'm currently working with an updated Elementary OS 5.1.2 Hera&quot;. After some of the last updates the system started to change the behavior when I copy and paste files/folders from the file browser (I am suing the default  &lt;code&gt;io.elementary.files&lt;/code&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before the change: after selection of a file/folder, I used to to copy with &lt;code&gt;CTRL-C&lt;/code&gt;, then going into a text editor or the terminal with &lt;code&gt;CTRL-V&lt;/code&gt; I just pasted the full (absolute) file path or directory eg: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;/home/user/bla/bla/filename.ext&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently this wonderful behavior changed, in the sense that when I do CTRL-V in editors/terminal it pastes &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;file:///home/user/bla/bla/filename.ext&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now it is so annoying to go back and forth and delete &lt;code&gt;file://&lt;/code&gt; from the filepath.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there any way to get back to the good old behavior?&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2023-12-21T03:01:40.213" Title="files copy and paste absolute file paths" Tags="|files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22580" PostTypeId="2" ParentId="22578" CreationDate="2020-02-28T10:57:28.383" Score="1" Body="&lt;p&gt;In order to prevent this error you have to comment the line in your sources.list which asks for a CD Rom. An option to achieve this is by using command line.&lt;/p&gt;&#xA;&lt;h1&gt;1. Create a backup of the file first&lt;/h1&gt;&#xA;&lt;p&gt;Open your terminal application and paste or type the line&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The system will ask for your administrator password, you have to type it. If there is no error message, continue with the next step:&lt;/p&gt;&#xA;&lt;h1&gt;2. Comment out the line which asks for CD rom&lt;/h1&gt;&#xA;&lt;p&gt;Type or paste into termimnal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudoedit /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and you will be into text edit mode of the system file I mentioned above. Using arrow keys of your keyboard you have to navigate to the line which starts with &lt;code&gt;deb cdrom:[elementary OS ..&lt;/code&gt; and put the &lt;code&gt;#&lt;/code&gt; sign in front of it in order to became &lt;code&gt;#deb cdrom:[elementary OS..&lt;/code&gt; or &lt;code&gt;# deb cdrom:[elementary OS..&lt;/code&gt;. Press &lt;kbd&gt;ctl&lt;/kbd&gt;+&lt;kbd&gt;o&lt;/kbd&gt; to save and then &lt;kbd&gt;ctl&lt;/kbd&gt;+&lt;kbd&gt;x&lt;/kbd&gt; to quit the application.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-02-28T11:03:40.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22584" PostTypeId="1" CreationDate="2020-02-28T19:28:20.240" Score="1" ViewCount="451" Body="&lt;p&gt;After installing the update that enables unattended updates, I am receiving a &quot;Failed to Fetch Updates&quot; message. Also as a result, when I try to use Synaptic Package Manager, I receive the message,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E: Syntax error /etc/apt/apt.conf.d/50unattended-upgrades:14:&#xA;  Malformed tag.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;An additional side effect is that if I uninstall an app from the AppCenter and then try to reinstall it, I no longer receive a prompt for a password and hence I can no longer reinstall the app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do to remedy the situation and get this update for enabling unattended updates to behave properly? I am running Hera with Linux 5.3.0-40 kernel.&lt;/p&gt;&#xA;" OwnerUserId="20825" LastEditorUserId="16827" LastEditDate="2020-03-09T12:49:45.087" LastActivityDate="2020-03-09T12:49:45.087" Title="Update for Unattended Updates Causes Problems" Tags="|updates|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22585" PostTypeId="1" CreationDate="2020-02-28T23:35:40.143" Score="0" ViewCount="56" Body="&lt;p&gt;I may have deleted some needed repositories. I need a list of the current repositories for updating elementary OS Hera.&lt;/p&gt;&#xA;" OwnerUserId="20825" LastActivityDate="2020-02-28T23:35:40.143" Title="Need List of Repositories for Updating Hera" Tags="|repositories|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22586" PostTypeId="1" CreationDate="2020-02-28T23:49:53.857" Score="1" ViewCount="156" Body="&lt;p&gt;Every time I open the appcenter there is a message of &quot;Failed to fetch updates&quot; Everything seems to be working fine, but I would like to solve it &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SLzbi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SLzbi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the full content of the window&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;W: Ignoring file 'brave-hera.list.' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;  E: Release file for &lt;a href=&quot;http://packages.elementary.io/appcenter/dists/bionic/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter/dists/bionic/InRelease&lt;/a&gt; is not valid yet (invalid for another 7h 57min 2s). Updates for this repository will not be applied.&#xA;  E: Release file for &lt;a href=&quot;http://security.ubuntu.com/ubuntu/dists/bionic-security/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/dists/bionic-security/InRelease&lt;/a&gt; is not valid yet (invalid for another 1h 9min 2s). Updates for this repository will not be applied.&#xA;  E: Release file for &lt;a href=&quot;http://it.archive.ubuntu.com/ubuntu/dists/bionic-updates/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://it.archive.ubuntu.com/ubuntu/dists/bionic-updates/InRelease&lt;/a&gt; is not valid yet (invalid for another 3h 17min 26s). Updates for this repository will not be applied.&#xA;  E: Release file for &lt;a href=&quot;http://it.archive.ubuntu.com/ubuntu/dists/bionic-backports/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://it.archive.ubuntu.com/ubuntu/dists/bionic-backports/InRelease&lt;/a&gt; is not valid yet (invalid for another 1h 11min 15s). Updates for this repository will not be applied.&#xA;  E: The repository '&lt;a href=&quot;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/nvbn-rm/ppa/ubuntu&lt;/a&gt; bionic Release' does not have a Release file.&#xA;  W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;  W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;  E: Release file for &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/bionic/InRelease&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu/dists/bionic/InRelease&lt;/a&gt; is not valid yet (invalid for another 7h 26min 49s). Updates for this repository will not be applied&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Thank you very much for your help in advance.&lt;/p&gt;&#xA;" OwnerUserId="20827" LastActivityDate="2024-03-20T08:00:40.077" Title="Message of error each time I open Appcenter" Tags="|updates|appcenter|release-hera|ppa|repositories|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22587" PostTypeId="1" CreationDate="2020-02-29T09:11:06.473" Score="1" ViewCount="1460" Body="&lt;p&gt;i get this error when running an executable on linux and im not really sure how to update GLIBC without breaking my sistem&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~~~[6057] Error loading Python lib '/tmp/_MEILaGheb/libpython3.8.so.1.0': dlopen: /lib/x86_64-linux-gnu/libm.so.6: version `GLIBC_2.29' not found (required by /tmp/_MEILaGheb/libpython3.8.so.1.0)~~~&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20830" LastActivityDate="2020-02-29T09:11:06.473" Title="GLIBC_2.29' not found help" Tags="|python|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22588" PostTypeId="2" ParentId="22586" CreationDate="2020-02-29T10:36:14.357" Score="0" Body="&lt;p&gt;You might have broken packages.&#xA;Try the following it terminal &#xA;you might need to install aptitude with&#xA;sudo apt-get install aptitude&#xA;sudo aptitude update &amp;amp;&amp;amp; sudo aptitude safe-upgrade&#xA;hope this helps&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2020-02-29T10:36:14.357" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22589" PostTypeId="2" ParentId="22518" CreationDate="2020-02-29T10:40:04.137" Score="0" Body="&lt;p&gt;you can also install fritzing. this can be used with Arduino and pi.&#xA;you will need to install the parts file also&#xA;sudo apt install fritzing &amp;amp;&amp;amp; sudo apt install fritzing-parts&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2020-02-29T10:40:04.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22590" PostTypeId="2" ParentId="22546" CreationDate="2020-02-29T10:48:28.457" Score="0" Body="&lt;p&gt;Elementary and Google dont play together, you need to create a 1 off password the get the two together.&#xA;follow this link and ti will get you going.&#xA;&lt;a href=&quot;https://support.google.com/accounts/answer/185833?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/accounts/answer/185833?hl=en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2020-02-29T10:48:28.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22591" PostTypeId="2" ParentId="22576" CreationDate="2020-02-29T12:56:27.317" Score="1" Body="&lt;p&gt;See if Wine is installed by running it from the command line, just type wine and hit tab a few times - all the options matching wine should be listed. You can also run wine --version, which should yield the version that is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, wine doesn't add anything to the app menu because it doesn't create a . desktop file. This thread should help you: &lt;a href=&quot;https://forums.puri.sm/t/wine-installed-not-in-list-of-applications/2563&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.puri.sm/t/wine-installed-not-in-list-of-applications/2563&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9774" LastActivityDate="2020-02-29T12:56:27.317" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22592" PostTypeId="2" ParentId="22584" CreationDate="2020-02-29T23:50:24.187" Score="0" Body="&lt;p&gt;Monsieur,&#xA;j'avait le même problème. Ma solution : Effacez dans le fichier « apt.conf.d » à la ligne 13 seulement un guillemet &quot; et puis le résultat est : &quot;UbuntuESMApps:bionic-apps-security&quot;;&#xA;D'après toutes les actualisations marchent.&#xA;Meilleurs salutations&lt;/p&gt;&#xA;" OwnerUserId="20833" LastEditorUserId="-1" LastEditDate="2020-03-09T12:43:30.487" LastActivityDate="2020-03-09T12:43:30.487" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22595" PostTypeId="1" CreationDate="2020-03-01T17:49:56.850" Score="0" ViewCount="147" Body="&lt;p&gt;I'm quite new to the linux world. I installed elementary OS alongside win10 on the same ssd in different partitions. While installing I created a swap- home and efi partition. &#xA;after a while, I tried booting back to win10 and at first it stated that the system needed repair tools and wouldn't let me progress. I burned a ISO into a usb and tried booting from there but nope.&#xA; After messing a bit with the bios setting now it displays another error: &lt;strong&gt;&quot;reboot and select proper boot device or insert boot media in selected boot device and press a key&quot;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried messing with the bios setting, changing boot order but nothing worked. my laptop is an &lt;strong&gt;Asus a55v&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can boot without errors into elementaryOS but I really need win10 back as well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;here a pic of my partitions in gparted.&#xA;windows is sda2 while sd1 is recovery for windows and sda3 is elementary  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much for your help and time,&#xA;Jean  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/e3jdC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/e3jdC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here are my bios settings &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tsaDN.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;bios setting asus a55v &lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20842" LastActivityDate="2023-12-13T12:01:40.167" Title="Windows 10 no longer boots after dual installing elementary OS" Tags="|boot|microsoft-windows|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22596" PostTypeId="1" CreationDate="2020-03-01T19:24:39.720" Score="0" ViewCount="635" Body="&lt;p&gt;Installed Elementary OS Hera on a HP Elitebook 840 G5. The OS is fast, stable and responsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When plugging in a external monitor to the HDMI port, the monitor itself (an LG 27UD58) recognizes that it has been plugged into a source, but the latptop does not. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I go to Displays and ask it to identify the displays that it is aware of, it sees the laptop's built-in LCD, but not the external LG.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Update: I'm going to leave this open as the HP Elitebook 840 G5 does not recognize the LG27UD58 monitor, but does recognize other external displays, including other UHD displays, using the HDMI port on the right side of the laptop.&lt;/p&gt;&#xA;" OwnerUserId="20843" LastEditorUserId="20843" LastEditDate="2020-03-02T22:45:43.393" LastActivityDate="2020-03-03T09:30:08.197" Title="External Monitor and HP Elitebook 840 G5" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22598" PostTypeId="1" CreationDate="2020-03-02T03:24:22.680" Score="1" ViewCount="215" Body="&lt;p&gt;As mentioned everything was working fine, but then I tried mirror display and the scaling went bad. Now I can't access the setting to undo it because it's at the bottom of the window and won't fit in the screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/c4789.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/c4789.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20846" LastEditorUserId="16827" LastEditDate="2020-03-12T07:15:03.957" LastActivityDate="2021-12-02T16:59:35.397" Title="I just installed elementary OS and everything was working, but now display scaling is messed up" Tags="|display|scaling|" AnswerCount="3" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22599" PostTypeId="2" ParentId="22584" CreationDate="2020-03-02T08:38:10.347" Score="3" Body="&lt;p&gt;To translate that: &#xA;1. sudo open /etc/apt/apt.conf.d/50unattended-upgrades&#xA;2. remove one of the end quotation marks in line 13&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;UbuntuESMApps:bionic-apps-security&quot;&quot;;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;--&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;&quot;UbuntuESMApps:bionic-apps-security&quot;;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;save&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;to test you can run &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo unattended-upgrades --dry-run -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20848" LastActivityDate="2020-03-02T08:38:10.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22600" PostTypeId="1" AcceptedAnswerId="24518" CreationDate="2020-03-02T12:19:24.243" Score="0" ViewCount="225" Body="&lt;p&gt;The stock Killer card is a bit unstable, it randomly disconnects, rarely but still.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was thinking to switch to an Intel 9260 but should I install Intel drivers before switching cards? If so, how?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am expecting the new Intel card to work automatically with elementary OS. I will no go through a fresh install just for this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Much obliged.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-05-11T12:38:28.037" Title="Switching wireless card from Killer 1535 to Intel 9260 on a Dell XPS 9550" Tags="|wifi|intel|dell|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22601" PostTypeId="2" ParentId="22497" CreationDate="2020-03-02T15:05:11.787" Score="0" Body="&lt;p&gt;Well OK this is still happening and no one seems to have an answer. I love eOS but can't work with it like this. I guess I will have to switch OS.&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2020-03-02T15:05:11.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22602" PostTypeId="2" ParentId="22595" CreationDate="2020-03-02T17:21:06.087" Score="0" Body="&lt;p&gt;Can you get directly into the boot menu directly when you reboot?  It might be F8.  If so, you should see windows boot manager as one of the options.  If you don't see it then something is not good.&lt;/p&gt;&#xA;" OwnerUserId="20712" LastActivityDate="2020-03-02T17:21:06.087" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22603" PostTypeId="2" ParentId="22598" CreationDate="2020-03-03T02:05:11.690" Score="0" Body="&lt;p&gt;Just thinking off the top of my head here: Can you click on the title bar and move the window towards the lower right-hand corner just a bit? If you can, you should then be able to get a screen resize arrow. Then try re-sizing the window to where it's small enough and you move the window so you can access the settings.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-03-03T02:05:11.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22605" PostTypeId="1" CreationDate="2020-03-03T07:17:26.910" Score="2" ViewCount="88" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/M3CXj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't find wifi setting in hera. I install it dual boot with windows.. any solution? Please help&lt;/p&gt;&#xA;" OwnerUserId="20856" LastEditorUserId="15904" LastEditDate="2020-03-09T12:42:25.723" LastActivityDate="2020-03-09T12:42:25.723" Title="Can't find wifi settings in hera" Tags="|wifi|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22608" PostTypeId="1" AcceptedAnswerId="22610" CreationDate="2020-03-03T11:26:59.590" Score="0" ViewCount="624" Body="&lt;p&gt;Is there a way to change the code app black background color to be equal to terminal color to get a cool integration? Look at the image for a better understanding. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance.&lt;a href=&quot;https://i.stack.imgur.com/4par4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4par4.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2020-03-03T16:15:00.150" Title="Change Code theme color" Tags="|code|color|" AnswerCount="3" CommentCount="0" ClosedDate="2020-03-09T12:45:04.753" ContentLicense="CC BY-SA 4.0" />
  <row Id="22610" PostTypeId="2" ParentId="22608" CreationDate="2020-03-03T11:52:20.023" Score="1" Body="&lt;p&gt;Short answer: edit &lt;code&gt;/usr/share/gtksourceview-3.0/styles/solarized-dark.xml&lt;/code&gt; and customize it the way you want. For example, line 29, changing the value of 'base3' from #002B36 to #2B2B2B will get you the desired background color.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4oehH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4oehH.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long answer: take a look at &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21540/dark-theme-on-elemntary-code-instead-of-solar-dark&quot;&gt;Dark theme on Elemntary Code instead of “Solar Dark”&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-03-03T12:15:38.270" LastActivityDate="2020-03-03T12:15:38.270" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22611" PostTypeId="2" ParentId="22608" CreationDate="2020-03-03T12:46:43.400" Score="0" Body="&lt;p&gt;@VladPop, here is the transparency I mean.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bwjjt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bwjjt.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2020-03-03T12:46:43.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22612" PostTypeId="2" ParentId="22497" CreationDate="2020-03-03T14:11:22.580" Score="0" Body="&lt;p&gt;Several things:&#xA;1.) Are you on a laptop? Does this occur when the system attempts to suspend or go in to standby? If so, then it could be an issue with your machine's DSDT/ACPI tables. There are ways to get around this by using the &quot;acpi_osi&quot; kernel argument. Reply for more information or Google/duckduckgo &quot;Linux acpi_osi&quot;.&#xA;2.) When it freezes, have you tried Ctrl+Alt+F1 to switch to a terminal? If you can get a textual login prompt, then that's a first step in to troubleshooting.  Log in this way and then run &quot;dmesg&quot; to see if there are any errors at the bottom of the output. You can also safely reboot from here via &quot;sudo reboot&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully this is a start.&#xA;-Reed&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2020-03-03T14:11:22.580" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22613" PostTypeId="1" AcceptedAnswerId="22614" CreationDate="2020-03-03T14:50:03.800" Score="2" ViewCount="475" Body="&lt;p&gt;Is there a way to keep the wingpanel color minimized and maximized as the same? Because when any app is maximized, the wingpanel color changes to black background and doesn't keep as when wasn't maximized.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/thtXC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/thtXC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vcY7A.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vcY7A.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2020-04-11T11:47:27.470" Title="Change wingpanel color" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22614" PostTypeId="2" ParentId="22613" CreationDate="2020-03-03T16:04:20.787" Score="2" Body="&lt;p&gt;Go to &lt;code&gt;~/.config/gtk-3.0/gtk.css&lt;/code&gt;. If it doesn't exist, create one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Write in a gtk.css file:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel {&#xA;    background-color: transparent;&#xA;    transition: all 1s ease-in-out;&#xA;}&#xA;&#xA;.panel.maximized {&#xA;    background-color: transparent;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will make wing panel transparent in maximized mode. Don't forget to reboot your PC after changings! Or use &lt;code&gt;killall wingpanel&lt;/code&gt; on Terminal to kill the wingpanel process. It will automatically restart.&lt;/p&gt;&#xA;" OwnerUserId="20859" LastEditorUserId="20859" LastEditDate="2020-04-11T11:47:27.470" LastActivityDate="2020-04-11T11:47:27.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22615" PostTypeId="1" CreationDate="2020-03-03T16:05:49.607" Score="1" ViewCount="60" Body="&lt;p&gt;I'm new to Elementary OS and Linux in general (other than my ASUS router and some use of a Raspberry pi), and I have a cheap Dell Inspiron 14 3473 laptop with a measly 32GB HDD. I successfully installed Elementary OS and everything is working really well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So, I'm wondering if I can save documents, videos, pictures, and music, as well as install apps to my 64GB USB Drive? Windows gives the option to install Apps to a USB drive rather than C drive, does Elementary OS allow the same thing?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for any help or suggestions. &lt;/p&gt;&#xA;" OwnerUserId="20858" LastActivityDate="2024-03-17T05:03:20.437" Title="Is it possible to extend the HDD with a USB Drive" Tags="|software-installation|usb-drive|dell|hdd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22616" PostTypeId="2" ParentId="22608" CreationDate="2020-03-03T16:15:00.150" Score="1" Body="&lt;p&gt;If you mean the Terminal's background, then you need to install the Elementary Tweaks and go to Terminal menu —&gt; Background Color and change the background color, you can also change the background transparency.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I don't recommend changing the background color from gray to any other color or setting the transparency too high. In my opinion it doesn't look neat, but you can do whatever you want!&lt;/p&gt;&#xA;" OwnerUserId="20859" LastActivityDate="2020-03-03T16:15:00.150" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22617" PostTypeId="1" AcceptedAnswerId="23931" CreationDate="2020-03-03T17:17:06.880" Score="1" ViewCount="1200" Body="&lt;p&gt;Unable to open elementary's built in text-editor: code.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When launching from dock, it never opens while the cursor gets replaced by a circular spinner for 10-15 seconds.&#xA;When launched from terminal, it gives the following error -&#xA;[GLib-GIO] Settings schema 'io.elementary.code.settings' does not contain a key named 'smart-cut-copy' &lt;a href=&quot;https://github.com/elementary/code/issues/766&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt; 31744 trace trap io.elementary.code&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo apt install --reinstall io.elementary.code&lt;/code&gt;, but it didn't fix anything, but it did give a warning on reinstallation&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it didn't resolve, but it did give a warning on reinstallation&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;No such key 'button-layout' in schema 'org.gnome.mutter:Pantheon' as specified in override file '/usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override'; ignoring override for this key. No such key 'enable-animations' in schema 'org.gnome.mutter:Pantheon' as specified in override file '/usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override'; ignoring override for this key.&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also updated to new version of code released today, but it doesn't fix this issue. I tried installation by cloning the repository, but it also gives same errors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/code/issues/766&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github Issue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8574" LastActivityDate="2020-04-23T18:43:22.810" Title="Settings schema 'io.elementary.code.settings' does not contain a key named 'smart-cut-copy'" Tags="|keyboard-shortcuts|code|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22619" PostTypeId="2" ParentId="21972" CreationDate="2020-03-04T04:19:22.547" Score="0" Body="&lt;p&gt;You could also just click on the vlc icon on the dock which will minimize it.&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2020-03-04T04:19:22.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22622" PostTypeId="2" ParentId="22497" CreationDate="2020-03-04T15:21:39.847" Score="0" Body="&lt;p&gt;thanks for your answer. &#xA;I am on a System 76 laptop (Galago Pro 13&quot;) (well, the German version, actually), Dual-Core Intel® Core™ i7-7500U CPU @ 2.70GHz with 16 GB of RAM and a SSD of 256.&#xA;No, the freezes happen very randomly, not when the system tries to suspend. It can be while navigating the web on Chrome, or Firefox or Opera. That is most of what I do so not sure if it would happen when doing something else. &#xA;I can certainly try again the CTRL-ALT-F1 option but I did before and nothing happened, the whole shebang was completely frozen, so I always have to do a hard reboot.&#xA;Any better idea? &#xA;Cheers&#xA;Fred&lt;/p&gt;&#xA;" OwnerUserId="16910" LastActivityDate="2020-03-04T15:21:39.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22623" PostTypeId="1" CreationDate="2020-03-04T15:25:07.950" Score="1" ViewCount="111" Body="&lt;p&gt;I can't change my network configuration. As you can see in the next image it is grey and I can't edit any option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L1371.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L1371.png&quot; alt=&quot;Image of the configuration&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20869" LastActivityDate="2020-03-04T15:25:07.950" Title="Can't modify the network configuration" Tags="|settings|networking|ethernet|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22624" PostTypeId="1" AcceptedAnswerId="22640" CreationDate="2020-03-04T15:28:24.367" Score="2" ViewCount="242" Body="&lt;p&gt;I ran &lt;code&gt;sudo apt-get -y update &amp;amp;&amp;amp; sudo apt-get -y upgrade&lt;/code&gt; around 2020-03-04T15:00:00Z, then rebooted my computer. The dock (plank) didn't show up, and the file manager (pantheon-files) is totally removed from my OS. I tried to fix this by running &lt;code&gt;sudo apt-get -y update &amp;amp;&amp;amp; sudo apt-get -y install pantheon-files&lt;/code&gt;, and it gave me the following log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree      &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;The following packages have unmet dependencies:&#xA; pantheon-files : Depends: libplank1 (&amp;gt;= 0.11.89) but 0.11.4+git20190318.fb624c21-0elementary5.0.1 is to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I checked the versions of libplank1, and at the time of writing this post, the highest version is 0.11.4-2 for Ubuntu Bionic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the output of &lt;code&gt;sudo apt update&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://packages.microsoft.com/repos/vscode stable InRelease&#xA;Get:2 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]                                                &#xA;Hit:3 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                &#xA;Hit:4 http://cn.archive.ubuntu.com/ubuntu bionic InRelease                                                                 &#xA;Hit:5 https://download.docker.com/linux/ubuntu bionic InRelease                                                            &#xA;Get:6 http://packages.elementary.io/appcenter bionic InRelease [5,893 B]                                                   &#xA;Ign:7 http://binaries.erlang-solutions.com/debian bionic InRelease                                                         &#xA;Get:8 https://repo.skype.com/deb stable InRelease [4,486 B]                                                                &#xA;Get:9 http://cn.archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]                                               &#xA;Hit:10 http://binaries.erlang-solutions.com/debian bionic Release                                                          &#xA;Hit:11 http://ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu bionic InRelease                                 &#xA;Hit:12 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                           &#xA;Get:13 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [234 kB]                  &#xA;Get:14 https://repo.skype.com/deb stable/main amd64 Packages [2,255 B]                                                     &#xA;Get:16 http://cn.archive.ubuntu.com/ubuntu bionic-backports InRelease [74.6 kB]                                            &#xA;Get:17 http://security.ubuntu.com/ubuntu bionic-security/main amd64 DEP-11 Metadata [38.5 kB]&#xA;Get:18 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 48x48 Icons [17.6 kB]&#xA;Get:19 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 64x64 Icons [41.5 kB]&#xA;Get:20 http://security.ubuntu.com/ubuntu bionic-security/main DEP-11 128x128 Icons [97.7 kB]     &#xA;Get:21 http://security.ubuntu.com/ubuntu bionic-security/universe amd64 DEP-11 Metadata [42.1 kB]   &#xA;Get:22 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 48x48 Icons [16.4 kB]           &#xA;Get:23 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 64x64 Icons [111 kB]            &#xA;Get:24 http://security.ubuntu.com/ubuntu bionic-security/universe DEP-11 128x128 Icons [181 kB]                   &#xA;Get:25 http://security.ubuntu.com/ubuntu bionic-security/multiverse amd64 DEP-11 Metadata [2,464 B]&#xA;Get:26 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main amd64 Packages [871 kB]&#xA;Get:27 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main i386 Packages [651 kB]&#xA;Get:28 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main amd64 DEP-11 Metadata [307 kB]&#xA;Get:29 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 48x48 Icons [73.8 kB]&#xA;Get:30 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 64x64 Icons [140 kB]&#xA;Get:31 http://cn.archive.ubuntu.com/ubuntu bionic-updates/main DEP-11 128x128 Icons [358 kB]&#xA;Get:32 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 Packages [1,054 kB]&#xA;Get:33 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe i386 Packages [1,010 kB]&#xA;Get:34 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe amd64 DEP-11 Metadata [264 kB]&#xA;Get:35 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 48x48 Icons [194 kB]&#xA;Get:36 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 64x64 Icons [453 kB]&#xA;Get:37 http://cn.archive.ubuntu.com/ubuntu bionic-updates/universe DEP-11 128x128 Icons [988 kB]&#xA;Get:38 http://cn.archive.ubuntu.com/ubuntu bionic-updates/multiverse amd64 DEP-11 Metadata [2,468 B]&#xA;Get:39 http://cn.archive.ubuntu.com/ubuntu bionic-backports/universe amd64 DEP-11 Metadata [7,980 B]&#xA;Fetched 7,422 kB in 6s (1,316 kB/s)                                         &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;apt-cache policy plank&lt;/code&gt; shows&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank:&#xA;  Installed: 0.11.4+git20190318.fb624c21-0elementary5.0.1&#xA;  Candidate: 0.11.4+git20190318.fb624c21-0elementary5.0.1&#xA;  Version table:&#xA; *** 0.11.4+git20190318.fb624c21-0elementary5.0.1 500&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 Packages&#xA;        100 /var/lib/dpkg/status&#xA;     0.11.4-2 500&#xA;        500 http://cn.archive.ubuntu.com/ubuntu bionic/universe amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And &lt;code&gt;apt-cache policy pantheon-files&lt;/code&gt; shows&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-files:&#xA;  Installed: (none)&#xA;  Candidate: 4.4.1+r3712+pkg91~ubuntu5.1.2.1&#xA;  Version table:&#xA;     4.4.1+r3712+pkg91~ubuntu5.1.2.1 500&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic/main amd64 Packages&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8615" LastEditorUserId="8615" LastEditDate="2020-03-04T23:57:56.577" LastActivityDate="2020-03-06T15:27:41.747" Title="Hera - dock and file manager are gone after upgrade" Tags="|updates|pantheon-files|release-hera|plank|" AnswerCount="1" CommentCount="9" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22625" PostTypeId="1" CreationDate="2020-03-04T16:31:59.533" Score="0" ViewCount="192" Body="&lt;p&gt;The keyboard shortcuts doesn't work SOMETIMES when I boot up the PC.&#xA;It's completelly random, sometimes it works and sometimes it doesn't. It's all configured in the Settings -&gt; Keyboard -&gt; Shortcut menu.&#xA;For example: I use the &quot;Print Screen&quot; and &quot;Open Terminal&quot; so much, and if they don't work I have to go to the settings and set the SAME key combination again so they can work.&#xA;Thanks for the help :D&lt;/p&gt;&#xA;" OwnerUserId="20869" LastActivityDate="2024-02-06T04:05:10.610" Title="Keyboard shortcuts don't work sometimes" Tags="|settings|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22627" PostTypeId="1" CreationDate="2020-03-05T00:37:35.667" Score="1" ViewCount="634" Body="&lt;p&gt;Can someone please explain to me how I would enable all updates to install automatically? Is there an option in AppCenter to do this? If not, when is it coming? If it's not coming... how would one do this?&lt;/p&gt;&#xA;" OwnerUserId="20077" LastActivityDate="2024-04-01T05:07:45.960" Title="How do you make all updates install automatically?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22628" PostTypeId="2" ParentId="21489" CreationDate="2020-03-05T02:49:52.700" Score="0" Body="&lt;p&gt;I can't answer for VM, but for bare metal Elementary Tweaks has a natural scrolling setting, I don't know why it wouldn't work with VM, also.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Don't forget &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt; if you need to add the PPA.&lt;/p&gt;&#xA;" OwnerUserId="20877" LastEditorUserId="16827" LastEditDate="2020-03-09T12:46:55.373" LastActivityDate="2020-03-09T12:46:55.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22630" PostTypeId="2" ParentId="22615" CreationDate="2020-03-05T13:25:55.423" Score="0" Body="&lt;p&gt;I do not know about apps, but for sure you can save documents, videos, pictures, and music on any drive connected and recongnized by the OS. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-03-05T13:25:55.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22631" PostTypeId="2" ParentId="22598" CreationDate="2020-03-05T13:33:14.643" Score="1" Body="&lt;p&gt;I had the same problem setting &lt;strong&gt;Scalling factor:&lt;/strong&gt; to &lt;strong&gt;Pixel Doubled&lt;/strong&gt; and the only way I found to resolve this is by 'guessing' pressing &lt;kbd&gt;Tab&lt;/kbd&gt; and &lt;kbd&gt;Enter&lt;/kbd&gt; again and again until i saw the sacalling factor select on the screen and I choose again LoDPI. If you have external monitor connected and you didn't messup with the system shortcuts, you can achieve this by &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;p&lt;/kbd&gt; which is used to circle between known display modes.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-03-05T13:33:14.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22632" PostTypeId="2" ParentId="22542" CreationDate="2020-03-05T13:50:28.187" Score="2" Body="&lt;p&gt;There is a submenu in the keyboard layout selection for &lt;code&gt;English (US)&lt;/code&gt; which I missed. So the steps are as easy as:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;System Settings &amp;gt; Keyboard&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;+&lt;/code&gt; in the lower left corner&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;code&gt;English (US)&lt;/code&gt; from the list of keyboard layouts&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;code&gt;English (US, alt. intl.)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Add Layout&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="5133" LastActivityDate="2020-03-05T13:50:28.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22635" PostTypeId="1" CreationDate="2020-03-05T18:14:07.483" Score="1" ViewCount="1281" Body="&lt;p&gt;I'm loving elementary on my macbook pro (manufactured 2017 I believe). Anyone know how to get the integrated camera working so I can use cheese and other video conferencing functions?&lt;/p&gt;&#xA;" OwnerUserId="20881" LastActivityDate="2024-02-07T03:06:40.773" Title="How to get integrated camera on macbook pro working" Tags="|macbook|camera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22636" PostTypeId="2" ParentId="22615" CreationDate="2020-03-05T18:35:50.630" Score="0" Body="&lt;p&gt;There are several ways you could approach this. As Bo stated you can just keep your personal files on an external drive but in that case applications that look for these files or store files (Downloads for example) in your home directory will not automatically find them and they will not show up by default in the Files sidebar.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I would recommend is copying your existing home directory to your USB drive and mount your home directory to it. This will work seamlessly for your personal files as well as application configuration files and the bulk of Flatpak apps (7.9 GB on my system) but it won't move apps installed in system folders. If this approach is what you want you can follow the steps below.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;WARNING: I was able to verify that this works on my laptop. If you stick to the commands you shouldn't create any irreversible issues. The only irreversible command is &lt;code&gt;rm&lt;/code&gt; so use it with caution. Read through the guide before executing and make sure this is something you are comfortable with.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a new elementary OS administrator user in system settings (you can remove this user when you are done if you choose)&lt;/li&gt;&#xA;&lt;li&gt;Log into the new user account and make sure your USB drive is inserted and mounted&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open a terminal window and open a shell as root with the command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo -i&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Make sure your USB drive is mounted then copy the contents of your primary users home directory over to the USB drive&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: You will need to replace [username] with the primary username, [temp username] with the username of the temporary user you are logged in with and [usb drive name] with the name of the usb drive which you can find it by executing &lt;code&gt;ls /media/[temp username]&lt;/code&gt;. Substitute these values in this and all of the remaining steps. Replace everything between the square brackets AND the brackets themselves.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cp -rp /home/[username]/* /media/[temp username]/[usb drive name]/&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Browse the USB drive and verify that everything was copied&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Move the original home directory to a new location so that you can reverse this if necessary&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mv /home/[username] /home/[username]_bak&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create a directory to mount to, change the owner, and prevent the directory from being written to when not mounted with the three commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;mkdir /home/[username]&lt;br/&gt; chown [username]:[username] /home/[username]&lt;br/&gt; chattr +i /home/[username]&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find the UUID of your USB drive with the command&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;blkid&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: You should see all of your drives and partitions listed if you are unsure which drive it is type &lt;code&gt;df -Th&lt;/code&gt; and look for the drive with the size matching your usb drive. Jot down the &lt;code&gt;/dev/...&lt;/code&gt; identifier for the drive then run &lt;code&gt;blkid&lt;/code&gt; again and find the matching &lt;code&gt;/dev/...&lt;/code&gt; line (e.g. /dev/sdb).&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Copy the UUID value to the clipboard (only the characters between the quotes following UUID=)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create the mount in fstab so it will auto mount on boot. The settings for the mount will allow the mount to fail and still boot for other users if the drive is not inserted or is corrupted, however you will not be able to log into the primary user account if the mount does not succeed (login screen loop). If this happens and you don't have a second administrator account you will have to use a live disk to repair the user profile which is a good argument for keeping the new admin user around.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;# External home drive&quot; &gt;&gt; /etc/fstab&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Followed by (one line, make sure to paste in your UUID and username):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;echo &quot;UUID=[paste your UUID here] /home/[username] auto defaults,nofail,x-systemd.device-timeout=9 0 1&quot; &gt;&gt; /etc/fstab&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount the drive with &lt;code&gt;mount -a&lt;/code&gt; and see if your files are there &lt;code&gt;ls -a /home/[username]&lt;/code&gt;. If not go through and review the steps again.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Log out and log into your primary user, validate that it works and if not log back into the temporary user and back out the change with the three commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo -i&lt;br/&gt; rm /home/[username]&lt;br/&gt; mv /home/[username]_bak /home/[username]&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2020-03-06T23:05:49.493" LastActivityDate="2020-03-06T23:05:49.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22638" PostTypeId="2" ParentId="22605" CreationDate="2020-03-05T23:06:38.347" Score="1" Body="&lt;p&gt;Try to shut down (not restart from window$) when dual booting and see if that helps. I got no sound when I directly restarted from Window$... Shuting down first solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="20882" LastActivityDate="2020-03-05T23:06:38.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22639" PostTypeId="2" ParentId="16544" CreationDate="2020-03-05T23:45:13.993" Score="0" Body="&lt;p&gt;&lt;code&gt;sudo apt-get remove iio-sensor-proxy&lt;/code&gt; solved this annoyance for me, Thank you!&lt;/p&gt;&#xA;" OwnerUserId="20882" LastEditorUserId="16827" LastEditDate="2020-03-09T12:38:47.053" LastActivityDate="2020-03-09T12:38:47.053" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22640" PostTypeId="2" ParentId="22624" CreationDate="2020-03-06T07:42:29.143" Score="1" Body="&lt;p&gt;This was resolved in the comments on the question, posting answer here for posterity. The issue was a corrupt apt cache.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The required version of plank comes from the &lt;code&gt;elementary/os-patches&lt;/code&gt; repository, which we could see was correctly available on the system from the &lt;code&gt;apt update&lt;/code&gt; output.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Despite successful runs of &lt;code&gt;apt update&lt;/code&gt;, running &lt;code&gt;apt-cache policy plank&lt;/code&gt; was still only showing version 0.11.4 as the latest version available when, in fact, 0.11.89 is available in the repository and this is the required version.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Clearing the apt caches by running &lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&lt;/code&gt; and then running &lt;code&gt;sudo apt update&lt;/code&gt; again was enough to get apt to regenerate its repository caches and see the new version of plank. Files and plank could then be reinstalled.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2020-03-06T15:27:41.747" LastActivityDate="2020-03-06T15:27:41.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22641" PostTypeId="1" AcceptedAnswerId="24234" CreationDate="2020-03-06T12:25:57.123" Score="0" ViewCount="38" Body="&lt;p&gt;every time my system wakes up from suspend it shows the wrong time, even though it is set to get the network time.&#xA;What could be the issue?&lt;/p&gt;&#xA;" OwnerUserId="20778" LastActivityDate="2020-04-23T08:10:52.003" Title="Wrong time after wake up from suspend" Tags="|system|suspend|time|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22643" PostTypeId="2" ParentId="13272" CreationDate="2020-03-06T14:04:08.817" Score="2" Body="&lt;p&gt;You could try like this:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Set your &lt;strong&gt;config&lt;/strong&gt; file in ~/.ssh&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Define your host as follows:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Host some.mydomain.com        &#xA;  HostName mydomain.com&#xA;  Port 22&#xA;  User myuser&#xA;  IdentityFile ~/.ssh/my_id_rsa&#xA;&lt;/code&gt;&lt;/pre&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Next, in Pantheon Files just set your SSH host as &lt;strong&gt;some.mydomain.com&lt;/strong&gt; with no username and password.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Connect and have fun.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20884" LastActivityDate="2020-03-06T14:04:08.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22645" PostTypeId="1" CreationDate="2020-03-06T17:02:53.067" Score="2" ViewCount="889" Body="&lt;p&gt;Hello there people of the internet,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm currently running Windows 10 and Elementary OS as dual boot. My root partition is about 12GB large and I'm starting to run into storage issues. Since my home partition is over 100GB big I thought it'd be good a idea to take some amount off of that and enlarge my root.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gsTh2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/gsTh2.png&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Model: ATA Samsung SSD 750 (scsi)&#xA;Disk /dev/sda: 250GB&#xA;Sector size (logical/physical): 512B/512B&#xA;Partition Table: gpt&#xA;Disk Flags: &#xA;&#xA;Number  Start   End     Size    File system     Name                          Flags&#xA; 1      1049kB  17,8MB  16,8MB                  Microsoft reserved partition  msftres&#xA; 2      17,8MB  125GB   125GB   ntfs            Basic data partition          msftdata&#xA; 3      125GB   137GB   12,0GB  ext4&#xA; 4      137GB   141GB   4000MB  linux-swap(v1)&#xA; 5      141GB   250GB   109GB   ext4&#xA; 6      250GB   250GB   1049kB                                                bios_grub&#xA;&#xA;&#xA;Model: ATA ST1000DM003-1SB1 (scsi)&#xA;Disk /dev/sdb: 1000GB&#xA;Sector size (logical/physical): 512B/4096B&#xA;Partition Table: gpt&#xA;Disk Flags: &#xA;&#xA;Number  Start   End     Size    File system  Name                          Flags&#xA; 1      17,4kB  633GB   633GB                LDM data partition&#xA; 2      633GB   634GB   538MB   fat32        EFI System Partition          boot, esp&#xA; 5      634GB   1000GB  366GB   ext4&#xA; 3      1000GB  1000GB  1049kB               LDM metadata partition&#xA; 4      1000GB  1000GB  133MB   fat16        Microsoft reserved partition  msftres&#xA;&#xA;&#xA;Model: General USB Flash Disk (scsi)&#xA;Disk /dev/sdc: 16,0GB&#xA;Sector size (logical/physical): 512B/512B&#xA;Partition Table: msdos&#xA;Disk Flags: &#xA;&#xA;Number  Start   End     Size    Type     File system  Flags&#xA; 1      1049kB  16,0GB  16,0GB  primary  fat32        boot, lba&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The disk in question is the first one, the SSD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything up to and including /dev/sda2 is my Windows stuff. Then comes the root, the swap, home and I think the last one should be boot. I've tried resizing sda5 so there's free space behind it, but as I've found out, I can't use that for my root partition since it's not adjacent to it. Resizing sda5 so that there's free space before it 1) gives me a warning that the partition might be unusable after that and 2) probably wouldn't help either since the swap partition is between root and sda5.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I'd like to ask you for help. How can I make my root partition bigger? I'd prefer to take space away from sda5, since over 100GB is probably way more than I could ever use up on linux, but other solutions are obviously welcome as well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: Since I haven't found a solution yet I'm probably going to reinstall elemetaryOS completely and this time make sure to make the root partition larger. I'd still like to find an alternative but I have about 500MB left on root so right now I'm not seeing another option&lt;/p&gt;&#xA;" OwnerUserId="20887" LastEditorUserId="20887" LastEditDate="2020-03-07T21:29:24.890" LastActivityDate="2023-12-12T13:01:45.363" Title="Resize root partition" Tags="|dual-boot|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22647" PostTypeId="1" CreationDate="2020-03-06T19:42:51.813" Score="0" ViewCount="155" Body="&lt;p&gt;После обновления на ядро ​​5.3.0-40 перестала запускаться система. В режиме восстановления запускается, но не работает регулировка яркости дисплея и процессор загружен на 100%. Пока пользуюсь 5.3.0-28. Ноутбук lenovo s340-API. AMD Ryzen 3, Vega 3.&lt;/p&gt;&#xA;" OwnerUserId="20890" LastActivityDate="2020-03-31T21:10:09.370" Title="Чёрный экран при загрузке после обновления" Tags="|black-screen|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22648" PostTypeId="2" ParentId="22321" CreationDate="2020-03-07T04:08:55.930" Score="1" Body="&lt;p&gt;Try using &lt;code&gt;gnome-session-properties&lt;/code&gt; you can set any command to run after a system startup. Just run it on Terminal and then press &quot;Add&quot;, and after that you need to write the script in the given textbox.&lt;/p&gt;&#xA;" OwnerUserId="20859" LastActivityDate="2020-03-07T04:08:55.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22651" PostTypeId="1" CreationDate="2020-03-07T05:45:46.580" Score="1" ViewCount="459" Body="&lt;p&gt;I am new to elementary OS and want to install Akira UX. But I have no idea how to install the dependencies mentioned there. Can any of you guys have command to install the dependencies?&lt;/p&gt;&#xA;" OwnerUserId="20896" LastActivityDate="2024-03-17T07:01:20.143" Title="How to install dependencies?" Tags="|software-installation|dependencies|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22655" PostTypeId="2" ParentId="22651" CreationDate="2020-03-07T16:53:18.663" Score="0" Body="&lt;p&gt;So, in order to install it from source, you'll first have to download and extract it to a folder: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal and paste the following command:&lt;br&gt;&#xA;&lt;code&gt;git clone https://github.com/akiraux/Akira.git &amp;amp;&amp;amp; cd Akira&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run meson to try and build the app from code:&lt;br&gt;&#xA;&lt;code&gt;meson build --prefix=/usr -Dprofile=default&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look to the output for any missing packages:&lt;br&gt;&#xA;&lt;code&gt;meson.build:25:0: ERROR:  Dependency &quot;libarchive&quot; not found, tried pkgconfig&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the missing package:&lt;br&gt;&#xA;&lt;code&gt;sudo apt install libarchive-dev&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Repeat steps 3 and 4 until no more meson ERROR is present in the output&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run the following command to install the application:&lt;br&gt;&#xA;&lt;code&gt;cd build &amp;amp;&amp;amp; ninja &amp;amp;&amp;amp; sudo ninja install&lt;/code&gt; (type your password when prompted)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You should now have Akira present in the Applications menu&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Note that the name of the package to install is NOT necessarily the name of the missing dependency. For example, to satisfy a 'Dependency &quot;libxml-2.0&quot; not found' meson ERROR, you'll need to install the &lt;code&gt;libxml2-dev&lt;/code&gt; package. Comment to this answer if you have problems finding the correct packages to install.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-03-07T16:53:18.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22656" PostTypeId="2" ParentId="20842" CreationDate="2020-03-07T18:42:36.857" Score="0" Body="&lt;p&gt;It seems that you've upgraded python3 version. As explained here &lt;a href=&quot;https://askubuntu.com/a/1191220/607679&quot;&gt;https://askubuntu.com/a/1191220/607679&lt;/a&gt;; because of the python3 update, usr/bin/python3 points to a python that does not have apt_pkg.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can create symlink like below. This should your problem.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ln -s /usr/lib/python3/dist-packages/apt_pkg.cpython-36m-x86_64-linux-gnu.so /usr/lib/python3/dist-packages/apt_pkg.so&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20908" LastEditorUserId="16827" LastEditDate="2020-03-09T12:48:47.037" LastActivityDate="2020-03-09T12:48:47.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22657" PostTypeId="1" CreationDate="2020-03-07T18:44:39.490" Score="2" ViewCount="174" Body="&lt;p&gt;I am using elementary os Hera on a MacBook Pro 2015. I found that 2 fingers scrolling is way too fast. Is there a way to slow it down? Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="20909" LastEditorUserId="15904" LastEditDate="2020-03-12T07:08:56.810" LastActivityDate="2020-05-01T18:06:58.887" Title="Touchpad two fingers scrolling too fast" Tags="|release-hera|touchpad|" AnswerCount="0" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22658" PostTypeId="1" CreationDate="2020-03-07T20:07:12.967" Score="1" ViewCount="189" Body="&lt;p&gt;i have elementary 5.1.2 Hera installed and i've been dealing with some really annoying screen freeze.&#xA;when i lock the screen (super + L) and then try to log in back the system freezes for like 10-20 seconds, i can move the mouse and if i'm on youtube i can play the video but the screen remains frozen, it's a fresh installation and i don't know why this happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any suggestions?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this is my setup:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6SMsm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6SMsm.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20682" LastActivityDate="2020-04-21T19:03:45.263" Title="slow resume and sometimes black screen after unlocking screen" Tags="|black-screen|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22659" PostTypeId="1" AcceptedAnswerId="22668" CreationDate="2020-03-07T20:55:00.520" Score="0" ViewCount="1558" Body="&lt;p&gt;I have installed elementaryOS on my Huawei Matebook D. This laptop has a Dolby Atmos Audio-Soundsystem with 4 speakers. &#xA;With the Linux installation, the speakers are much quieter and sound much worse.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any way to fix this?&lt;/p&gt;&#xA;" OwnerUserId="20911" LastActivityDate="2021-04-10T06:09:42.700" Title="How to install drivers for speakers" Tags="|drivers|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22660" PostTypeId="2" ParentId="22491" CreationDate="2020-03-07T21:09:11.233" Score="1" Body="&lt;p&gt;This seems to be fairly common. I just had to fix it on a fresh install. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Temp fix: In grub menu, highlight elementary option. Click e to edit. Find the &lt;em&gt;menuentry 'elementary'&lt;/em&gt; line. &#xA;Look for the line that looks like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux   /vmlinuz-5.3.0-40-generic root=/dev/mapper/elementary--vg-root ro  quiet splash $vt_handoff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit it to add nomodeset. Shoudl look like this when done:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;linux   /vmlinuz-5.3.0-40-generic root=/dev/mapper/elementary--vg-root ro  quiet splash nomodeset $vt_handoff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hit F10 to boot into elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once there, make nomodeset permanent.&#xA;In the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look for this line: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add nomodeset. It should look like this: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash nomodeset&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Press ctrl+o, then enter (it prompts for the file to output to, default is generally the file you opened).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press ctrl+x to exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have/prefer gedit:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Make the same edit and save.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once your edit is done, enter this in the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20910" LastActivityDate="2020-03-07T21:09:11.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22662" PostTypeId="2" ParentId="22506" CreationDate="2020-03-08T02:53:04.107" Score="0" Body="&lt;p&gt;answering the question directly...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To move a user from one computer to another, transfer all the files underneath the user's home directory (let's say the user's name is 'Mary' and their username is also 'mary') to the new home directory on the new computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the Terminal of your old computer:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home&#xA;sudo tar cvzf mary.tgz mary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will create a mary.tgz file.  Copy this file to a USB stick.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp mary.tgz /path/to/usbstick&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;While logged into your administrator user on your new computer, if you haven't done this already, go into System Settings -&gt; User Accounts, unlock it, and click the &quot;+&quot; (in the lower righthand corner) to create a user 'Mary' (with username 'mary')&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RApvi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RApvi.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home&#xA;sudo tar xvzf /path/to/usbstick/mary.tgz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;log out of your administrator user and log into 'Mary' and verify all the files &amp;amp; preferences have been transferred before you clean up or get rid of your old computer.&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-03-08T02:53:04.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22663" PostTypeId="2" ParentId="22425" CreationDate="2020-03-08T03:10:42.730" Score="1" Body="&lt;p&gt;Given the severity of a recent Sudo vulnerability (&lt;a href=&quot;https://nvd.nist.gov/vuln/detail/CVE-2019-18634&quot; rel=&quot;nofollow noreferrer&quot;&gt;CVE-2019-18634&lt;/a&gt;), turning this feature off is an &lt;strong&gt;excellent&lt;/strong&gt; idea regardless of whether sudo is patched or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this worked great for me on 5.1 (Hara):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/sudoers.d/pwfeedback /etc/sudoers.d/pwfeedback.disabled&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;in the event you can't wait 15 minutes to test that it works, you can kill any remaining time using:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo -k&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then execute your favorite sudo command without them asterisks :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;references&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=284566&quot; rel=&quot;nofollow noreferrer&quot;&gt;Mint 19.1 -- Terminals show asterisks on password. How to disable&#xA;this feature?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/14948/how-to-cancel-the-currently-applied-remaining-sudo-time-out&quot;&gt;How to cancel the currently-applied remaininsudo time-out?&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-03-08T03:10:42.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22664" PostTypeId="2" ParentId="22645" CreationDate="2020-03-08T07:03:01.173" Score="0" Body="&lt;p&gt;Your intuition is right, reinstalling the OS is probably the easiest way out.  You have already made your /home partition separate so as long as you create the same username on the reinstall and point it to your existing /home partition, it should be super straight forward.   As you mention, just be sure to give the root partition 15GB (if not 20GB or 30GB).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you're feeling adventurous, this is what I would try:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;backup&lt;/strong&gt; your data (and not just in your install, any critical data on this drive)&lt;/li&gt;&#xA;&lt;li&gt;resize/reduce your /home partition by 20-30GB&lt;/li&gt;&#xA;&lt;li&gt;create/format a new ext4 partition to hold a clone of your existing install in the 20-30GB freespace&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;use a tool like &lt;a href=&quot;https://askubuntu.com/questions/1028604/bash-script-to-backkup-clone-ubuntu-to-another-partition&quot;&gt;clone-ubuntu.sh&lt;/a&gt; to perform the clone (UPDATE: there seems to be a bug in &quot;rsync -x&quot; that doesn't make it skip your mounted /home partition. the workaround is to add &quot;home/*&quot; to the list of excludes in the script)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;--exclude={/dev/*,/proc/*,/sys/*,/tmp/*,/run/*,/mnt/*,/media/*,/lost+found,&lt;strong&gt;/home/*&lt;/strong&gt;}&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;verify you can boot to the &lt;strong&gt;clone&lt;/strong&gt; (if your clone gets stuck on boot, &lt;a href=&quot;https://askubuntu.com/a/1121095/1034628&quot;&gt;this fix to update permissions of yr clone's root directory&lt;/a&gt; might work)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;delete your old install&lt;/li&gt;&#xA;&lt;li&gt;reallocate the freespace (perhaps extend your Win10 partition as you seem to be using up the space well)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I admittedly made mistakes using the script along the way (because I was using the script to migrate my install from HDD to SDD and it turns out the script is to clone installs to the &lt;strong&gt;same&lt;/strong&gt; drive and thankfully didn't lose any data in the process - just lots of failed boots which I eventually was able to fix and learned a lot about the low-level pinnings of Linux!)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only other thing I would watch out for is maintaining your dual-boot configuration.  but I feel if you got as far as getting dual-boot to work, you're good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and if cloning doesn't work out for you, toss your old install and/or clone and install a fresh Elementary OS you intended.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;good luck!&lt;/p&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-04-01T05:54:32.403" LastActivityDate="2020-04-01T05:54:32.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22665" PostTypeId="2" ParentId="22635" CreationDate="2020-03-08T07:22:26.950" Score="0" Body="&lt;p&gt;I needed to install AppleUSBVideoSupport to Elementary 5.1 (Hara) to get my camera to work on an older 2007 MacBook (2,1).  Your MacBook is much newer and can only assume it's the same issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This post outlines the steps.  There is a &quot;isight-firmware-tools&quot; package to install but before you do that, you have to grab (or download) the support file outlined in this article:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://turanct.wordpress.com/tag/appleusbvideosupport/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://turanct.wordpress.com/tag/appleusbvideosupport/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;NOTE: as of March 6th, in the event you want to use the iSight in Chrome, I am &lt;a href=&quot;https://bugs.chromium.org/p/chromium/issues/detail?id=1056070#c4&quot; rel=&quot;nofollow noreferrer&quot;&gt;still working with the Chromium team to recognize the built-in iSight&lt;/a&gt;.  In Elementary, the default Camera app works and so does Zoom conference software.&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-03-08T07:22:26.950" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22668" PostTypeId="2" ParentId="22659" CreationDate="2020-03-08T16:33:48.460" Score="1" Body="&lt;p&gt;I have the Matebook Pro X and had the same issue. In my case only two of the four speakers worked (bottom worked top didn't) after installing elementary OS and a few other distros. I was able to find information that allowed me to get get the top two speakers working and now it sounds great. If your top two speakers are not working this may apply to the Matebook D as well.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;In a terminal install some audio packages&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install alsa-tools alsa-tools-gui pavucontrol&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;In the terminal run the hdajackretask utility&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;hdajackretask&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Once the GUI opens choose &amp;quot;Realtek ALC256&amp;quot; in the &amp;quot;Selecta a codec&amp;quot; dropdown&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y0MQp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y0MQp.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Check the &amp;quot;Show unconnected pins&amp;quot; and &amp;quot;Advanced override&amp;quot; boxes under &amp;quot;Options&amp;quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nEBJ1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nEBJ1.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;You should see a list of pins under &amp;quot;Pin configuration&amp;quot; with identifiers like &amp;quot;Pin ID: 0x14&amp;quot;. You will need to override two of them, &amp;quot;0x14&amp;quot; and &amp;quot;0x1b&amp;quot;. Check the &amp;quot;Override&amp;quot; box on both of them and set all of the values as shown below.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/UOjsy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UOjsy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ygFl8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ygFl8.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;Click &amp;quot;Apply now&amp;quot; and test the speakers. If they work click on &amp;quot;Install boot override&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Rebuild your initramfs with the command below then reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo update-initramfs -u&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;8&quot;&gt;&#xA;&lt;li&gt;After rebooting, open the PulseAudio Volume Control application (pavucontrol) and make sure that the window is wide enough to see the &amp;quot;Configuration&amp;quot; tab (or use the &amp;gt; button to scroll right). Click &amp;quot;Configuration&amp;quot; then choose &amp;quot;Analog Surround 4.0 Output&amp;quot; in the &amp;quot;Profile&amp;quot; dropdown. You can hear the difference by playing a good song and switching between &amp;quot;Analog Stereo Duplex&amp;quot; and &amp;quot;Analog Surround 4.0 Output&amp;quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19632" LastEditorUserId="19632" LastEditDate="2021-04-10T06:09:42.700" LastActivityDate="2021-04-10T06:09:42.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22670" PostTypeId="2" ParentId="19162" CreationDate="2020-03-08T22:47:47.920" Score="0" Body="&lt;p&gt;Ctrl+F and type &lt;code&gt;cerbere&lt;/code&gt; location is &lt;code&gt;/io/elementary/desktop/cerbere&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="20915" LastActivityDate="2020-03-08T22:47:47.920" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22671" PostTypeId="1" CreationDate="2020-03-09T09:02:38.240" Score="1" ViewCount="81" Body="&lt;p&gt;I'd lile to know how eOS manages audio devices, does it uses ALSA, PulseAudio or what? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am having problems with an USB mic but the &lt;code&gt;Setting &amp;gt; Audio&lt;/code&gt; doesn't say much. Since in the past I devastated the system trying to fix audio probles, before doing anything I'd like to know &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;can I install some PulseAudio utility to see if I can fix the problem? Any experience about that?  &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;what are the main config files about audio in eOS, where they are located?&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="2982" LastEditorUserId="15904" LastEditDate="2020-03-12T06:32:18.900" LastActivityDate="2020-03-12T06:32:18.900" Title="Which sound server in eOS Hera" Tags="|release-hera|audio|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22676" PostTypeId="2" ParentId="22579" CreationDate="2020-03-10T06:45:24.467" Score="0" Body="&lt;p&gt;I haven't done any setting, but after last update today the issue disappeared. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Therefore, now copying a file into &lt;code&gt;Files&lt;/code&gt; and pasting into terminal/text editor does the right this, e.g. it pastes &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;/home/user/bla/bla/filename.ext&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I wonder where this has been fixed.&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2020-03-10T06:45:24.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22677" PostTypeId="1" CreationDate="2020-03-10T11:53:36.900" Score="0" ViewCount="163" Body="&lt;p&gt;my hard drive is suddenly filled up and that's 80GB ?! and all i have is few doc files and few snaps installed thats's it ? i tried to install a snap earlier this day and that was not successful so i think that did something with the memory. I just need some help please help me with this.&lt;/p&gt;&#xA;" OwnerUserId="19332" LastActivityDate="2020-04-09T18:15:53.737" Title="Can i reset my whole operating system i mean can factory reset the data on my OS ??" Tags="|system-installation|updates|system|files|filesystem|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22679" PostTypeId="1" CreationDate="2020-03-10T16:11:05.500" Score="1" ViewCount="91" Body="&lt;p&gt;Upon entering my password I get this error.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fXebj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fXebj.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20926" LastActivityDate="2020-03-13T12:03:37.663" Title="io.elementary.greeter Unable to log in" Tags="|greeter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22680" PostTypeId="1" CreationDate="2020-03-10T16:38:42.693" Score="2" ViewCount="95" Body="&lt;p&gt;How do I search for an app by starting to type on the desktop while the 'show all open windows' is displayed. e.g similar to gnome-shell top left hot corner in which you can just start typing an app name and it will display matches. I know clicking on the applications shortcut allows that, but it is an unnecessary step. Basically, how to I mimic the gnome shell type functionality. I've been using gnome-shell for years and can't unlearn this and can't live without it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've managed to set the top left corner as a hot corner for 'display all open windows', how do I now make the system start listening for keyboard strokes to search for applications without adding another click or keyboard stroke.&lt;/p&gt;&#xA;" OwnerUserId="20927" LastActivityDate="2024-01-03T01:02:20.260" Title="How to Search for an app by starting to type on the desktop While 'show all open windows' is displayed" Tags="|gnome|launcher|hot-corners|desktop-environment|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22681" PostTypeId="2" ParentId="22677" CreationDate="2020-03-10T16:51:30.867" Score="0" Body="&lt;p&gt;I would suggest using an application called Disk Usage Analyzer available from the AppCenter to determine where the culprit is. With that information you can determine what needs to be removed and figure out the best course of action. The best solution will depend on whether the files are system files or user files in your home directory. The aforementioned application will allow you to drill down to the specific file(s). If you are unsure add a screenshot to your post for further assistance.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-03-10T16:51:30.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22682" PostTypeId="1" CreationDate="2020-03-10T19:47:36.683" Score="1" ViewCount="299" Body="&lt;p&gt;I'm trying to use PHPStorm and set up some keybindings using the super / meta key (&quot;windows&quot; key on my keyboard) but it looks like PHPStorm is not receiving the keyboard input at all (e.g. when I try to define a new keyboard shortcut, it won't pick up any combination when I start with the super key).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A similar problem is outlined in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12247/keybindings-specifically-using-the-super-key-in-intellij-idea&quot;&gt;Keybindings, specifically using the Super key in IntelliJ Idea&lt;/a&gt; however there is not really a satisfactory solution, as I would like to keep all other functionality involving the super key such as &lt;code&gt;⌘ - space&lt;/code&gt; to bring up the Elementary launcher, which would break if I were to remap the key entirely.&lt;/p&gt;&#xA;" OwnerUserId="20929" LastActivityDate="2020-03-19T06:43:35.130" Title="Jetbrains IDE not receiving &quot;Super&quot; / meta key input" Tags="|settings|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22683" PostTypeId="1" AcceptedAnswerId="23914" CreationDate="2020-03-10T20:18:15.567" Score="1" ViewCount="128" Body="&lt;p&gt;I just decided to switch over from Ubuntu 18.04 LTS to Elementary OS 5.1 (Hara) and like to tweak my desktop to hide the date/time in the top panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found an answer to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10319/how-to-hide-date-in-elementary-top-bar&quot;&gt;hiding the date in the top panel&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I went ahead and cloned the &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-datetime&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel-indicator-datetime GitHub repository&lt;/a&gt; to my system&lt;/p&gt;&#xA;&#xA;&lt;p&gt;@lemonslice nudges to ask a follow up question &quot;how to compile a (debian) package?&quot; so here I am :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The answer refers to debuild (which I understand is for package creation) and &lt;a href=&quot;https://elementary.io/docs/code/getting-started#building-and-installing-with-meson&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Elementary developer guide talks about using meson&lt;/a&gt;.  I am a noob when it comes to front-end development.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone explain or outline:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;the difference between using both build tools to make and deploy a change&lt;/li&gt;&#xA;&lt;li&gt;the recommended steps to rebuild wingpanel-indicator-datetime (after making desired changes to the source code)&lt;/li&gt;&#xA;&lt;li&gt;the steps deploy it to my local instance of Elementary OS&lt;/li&gt;&#xA;&lt;li&gt;the steps to rollback the changes (if there is an easier way than reverting the code and rebuilding/redeploying)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-03-31T05:52:11.590" LastActivityDate="2020-03-31T06:26:43.367" Title="How to compile and install changes to Elementary?" Tags="|release-hera|desktop|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22685" PostTypeId="2" ParentId="11507" CreationDate="2020-03-10T22:45:39.093" Score="0" Body="&lt;p&gt;I can verify updating &quot;hera&quot; to &quot;bionic&quot; in the following source list files allowed me to install elementary-sdk just now (for Elementary OS 5.1):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/apt/sources.list&#xA;/etc/apt/sources.list.d/elementary.list&#xA;/etc/apt/sources.list.d/patches.list&#xA;/etc/apt/sources.list.d/appcenter.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This appears to be an ongoing issue the past 4 years so I've filed &lt;a href=&quot;https://github.com/elementary/os/issues/316&quot; rel=&quot;nofollow noreferrer&quot;&gt;a bug in GitHub&lt;/a&gt; so this gets fixed at its root.&lt;/p&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-03-10T22:56:09.713" LastActivityDate="2020-03-10T22:56:09.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22686" PostTypeId="2" ParentId="22586" CreationDate="2020-03-10T22:53:29.543" Score="-1" Body="&lt;p&gt;AppCenter is attempting to check for Operating Software Updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution is to update/correct the source lists included with the distribution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Replace all instances of &quot;hera&quot; with &quot;bionic&quot; (in 5.1 Hera) in the following 4 files:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/apt/sources.list&#xA;/etc/apt/sources.list.d/elementary.list&#xA;/etc/apt/sources.list.d/patches.list&#xA;/etc/apt/sources.list.d/appcenter.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Once I made these changes, AppCenter was able to apply about 30+ updates and the dialog box has not reappeared.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would recommend doing this right away as at least one of the updates is a security update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A bug has been filed in GitHub (&lt;a href=&quot;https://github.com/elementary/os/issues/316&quot; rel=&quot;nofollow noreferrer&quot;&gt;os#316&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-03-10T22:53:29.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22687" PostTypeId="1" CreationDate="2020-03-10T23:09:09.593" Score="0" ViewCount="130" Body="&lt;p&gt;I installed Elementary OS 5.1 (Hera) to share my existing /home partition originally created in Ubuntu 18.04.4 LTS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm super pleased to be able to work out of the same home directory and discovering a few quirks like my desktop background setting getting clobbered.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Ubuntu uses a dynamic wallpaper and it clobbers Elementary's wallpaper setting (and vice versa).  The specific entry from dconf in question:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[org/gnome/desktop/background]&#xA;picture-uri='file:///usr/share/backgrounds/Sunset%20by%20the%20Pier.jpg'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There are settings in dconf that are ElementaryOS specific:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[io/elementary/desktop/wingpanel/applications-menu]&#xA;use-category=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a way to configure Elementary and Ubuntu to use distinct keys for its desktop background for example?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It totally makes sense that some people would want the same background and have a single shared key.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: the current workaround to avoid a null background is to use dconf Editor and set it to &quot;Use default value&quot; (which defaults to different values on boot for Ubuntu and ElementaryOS)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/W2Iej.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/W2Iej.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I really want are two separate desktop settings for each install.&lt;/p&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-04-09T02:48:05.777" LastActivityDate="2023-12-20T09:00:50.167" Title="how to create separate dconf keys for desktop background for Elementary and Ubuntu?" Tags="|release-hera|dual-boot|ubuntu|user|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22688" PostTypeId="1" CreationDate="2020-03-11T00:43:10.880" Score="1" ViewCount="75" Body="&lt;p&gt;I am running a desktop pc with dual monitors. I have a 34&quot; UltraWide as my primary monitor and a 32&quot; monitor (extended to the right). I am also using a GTX1080 and both displays are connected through DisplayPort.&#xA; The problem I have is that when i resume the monitors from sleep (only primary monitor is blank, the secondary still shows the desktop) I have to reconfigure again to have the secondary monitor &quot;extend to the right&quot;. I have it set to &quot;Configure new displays when connected&quot;. Otherwise it is a hassle to get into the display function to configure the displays. I have also saved the settings for the displays from the Nvidia X Server Settings to /etc/X11/xorg.conf file.&#xA; I have the XFCE Power Manager set to Blank after 20 minutes and Switch off after 25 minutes (system is set to never hibernate).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hopefully someone can assist in figuring this out. It is not a show stopper for this distribution... it is just annoying.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank You &#xA;Kevin&lt;/p&gt;&#xA;" OwnerUserId="20931" LastActivityDate="2020-03-11T00:43:10.880" Title="Problem with dual monitor setup after resume" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22690" PostTypeId="1" CreationDate="2020-03-11T15:50:58.013" Score="1" ViewCount="14" Body="&lt;p&gt;The USB keyboard connected to a 2011 iMac running the latest elementary os has stated randomly freezing, sometimes an unplug/replug works. Have tried an alternate keyboard same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15917/keyboard-randomly-freezes-while-typing&quot;&gt;Keyboard randomly freezes while typing&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;No change.&#xA;Has been fine except for the last week? Any ideas? Did boot into the original Mac OS and that had no problems.&lt;/p&gt;&#xA;" OwnerUserId="20936" LastActivityDate="2020-03-11T15:50:58.013" Title="USB Keyboard freezes" Tags="|keyboard|usb|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22691" PostTypeId="1" CreationDate="2020-03-11T16:50:32.583" Score="1" ViewCount="40" Body="&lt;p&gt;How do I turn off the gradient of the windows? Currently I am using the &lt;a href=&quot;https://surajmandalcell.github.io/elementary-x/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-x&lt;/a&gt; (white version) theme and the gradient on the windows makes the close, minimise and maximise buttons to look kind of &quot;unnotable&quot; to me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://postimg.cc/7CRF4kvy&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.postimg.cc/3RrYg8nW/Untitled.png&quot; alt=&quot;Untitled.png&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Notice that Keyboard Shortcuts and some other apps has this thing where there is no upper window space so it looks a lot better than the File Manager, for instance. I would really like to make apps to look like Keyboard Shortcuts - pure white and no gradient.&lt;/p&gt;&#xA;" OwnerUserId="20859" LastEditorUserId="20859" LastEditDate="2020-03-13T15:58:54.953" LastActivityDate="2020-03-13T15:58:54.953" Title="How do I turn off the windows gradient? [SOLVED]" Tags="|themes|window-management|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22692" PostTypeId="1" CreationDate="2020-03-11T18:18:39.367" Score="1" ViewCount="55" Body="&lt;p&gt;I recently installed elementary in a sort of non-traditional way because I didn't have a USB. I just made a 4 GB fat32 partition and booted off of it from refind, and after installation the splash screen worked fine, but since then I've been modifying things here and there and I'm not sure what happened, but now when I boot into elementary I no longer get a splash screen but a verbose boot instead. I've tried lots of different modifications to my /etc/default/grub file with no success. I'm really lost as to what could be causing this, any help would be appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, my laptop can show me which graphics card is being used with an LED (integrated vs discrete) and when I'm in elementary it is constantly using the discrete graphics, which in my online search I found may be connected. Because of that and also because of the power it uses, I'd like to know if there's a way to force elementary to use my integrated graphics, without going to the bios since I'm dual booting with windows. My card is an Nvidia GeForce GTX 1070 Max-Q, if that helps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry it's a loaded question, just wanted to be as specific as I can. Thanks in advance for the help!&lt;/p&gt;&#xA;" OwnerUserId="20938" LastActivityDate="2020-03-11T18:18:39.367" Title="Replacing verbose bootup with default splash screen" Tags="|boot|dual-boot|graphics|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22694" PostTypeId="1" CreationDate="2020-03-11T18:56:44.623" Score="1" ViewCount="38" Body="&lt;p&gt;Im using Office365 with Evolution client Email.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can see all my event in Elementary Calendar but when I create an event from it with recipients no invitation is being sent.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have to manually add recipients directly from Office 365 website.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Similiar issue was posted here&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19599/calendar-invite-is-never-sent-to-recipients/22693#22693&quot;&gt;Calendar invite is never sent to recipients&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20939" LastActivityDate="2020-03-11T18:56:44.623" Title="No Meeting invite is being sent to recipients" Tags="|calendar|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22695" PostTypeId="1" CreationDate="2020-03-11T19:28:46.333" Score="1" ViewCount="310" Body="&lt;p&gt;I'm hoping you can help. I am a noob linux user. I installed elementary OS 5.1 on my laptop, originally I had an issue with updating apps and with turning the laptop off. App updates are now sorted, however when I turn off the laptop, it goes to a black screen with elementary logo. I have to hold the power button down at this point to turn it off. I am using a HP envy x360 laptop if that helps at all.&lt;/p&gt;&#xA;" OwnerUserId="8687" LastActivityDate="2020-03-13T19:30:44.303" Title="Laptop won't turn off and requires holding power button" Tags="|shutdown|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22697" PostTypeId="1" CreationDate="2020-03-12T00:16:49.660" Score="1" ViewCount="114" Body="&lt;p&gt;I installed Elementary OS 5.1 Hera on my Lenovo T480s Laptop and almost everything works smoothly. However, I am experiencing a minor (but annoying) issue with the docking station.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the start-up, the USB External Keyboard connected to the docking station perfectly works, whereas it stops working every time the laptop wakes up from standby, and rebooting is required to restore the keyboard's functioning. Other than that, the two external displays connected to the same docking station through DisplayPort work just fine in all the situations, as well as the USB ports.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you experienced anything similar? Is it a bug?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="20945" LastEditorUserId="20945" LastEditDate="2020-03-14T11:01:32.077" LastActivityDate="2020-03-14T11:01:32.077" Title="Issues with USB External Keyboard connected to Lenovo Thinkpad T480s through Lenovo USB-C Dock 2nd Gen" Tags="|release-hera|keyboard|usb|thinkpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22698" PostTypeId="1" AcceptedAnswerId="22704" CreationDate="2020-03-12T02:16:14.440" Score="3" ViewCount="1405" Body="&lt;p&gt;In the default applications settings, is it possible to set the default email client to an AppImage? I'm using a Tutanota Desktop client for Linux that's an AppImage file but I don't see a way to use it as my default email client &amp;amp; when I search online for solutions I just see articles &amp;amp; forum posts explaining how to integrate AppImages into the DE but I already know how to do that so I was wondering if any one knows of any solutions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT: I was told to &quot;as root, open this with your text editor:&#xA;IE: sudo nano /usr/share/applications/defaults.list &#xA;change it:&#xA;x-scheme-handler/mailto=thunderbird.desktop&#xA;x-scheme-handler/mailto=/path/to/myCoolEmail.appimage&quot; and &quot;protocol says if it is not installed at /usr/local/bin or /opt move it there.&quot; but when I did as instructed it still didn't make it where I could choose the AppImage file from the default applications settings. Is it not possible to do this? Would this suggested solution be a good workaround despite not making a difference in the settings GUI?&lt;/p&gt;&#xA;" OwnerUserId="20946" LastEditorUserId="20946" LastEditDate="2020-03-12T20:35:58.317" LastActivityDate="2020-03-12T20:35:58.317" Title="(SOLVED) Is it possible to use an AppImage as a default application in Elementary OS 5.1.2 Hera?" Tags="|settings|applications|release-hera|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22699" PostTypeId="2" ParentId="560" CreationDate="2020-03-12T04:09:09.917" Score="1" Body="&lt;p&gt;This daemon will watch certain dirs for you and integrate them into your menu. It is all automatic, just drop your appimage file into a watched directory. I have also tested this by dragging from the Applications menu to the Dock and it works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/AppImage/appimaged/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/AppImage/appimaged/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20947" LastActivityDate="2020-03-12T04:09:09.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22700" PostTypeId="2" ParentId="2546" CreationDate="2020-03-12T08:29:51.257" Score="0" Body="&lt;p&gt;this is for raspberry pi where you run your program in a terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;create a desktop file (&lt;code&gt;runthis.desktop&lt;/code&gt;) in &lt;code&gt;/home/pi/.config/autostart&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;copy these lines to the file (&lt;code&gt;runthis.desktop&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry] &#xA;&#xA;Encoding=UTF-8&#xA;&#xA;Type=Application&#xA;&#xA;Name=RootCam&#xA;&#xA;Comment=&#xA;&#xA;Exec=x-terminal-emulator --working-directory=/home/pi/projects/RootCam/main -e /home/pi/projects/RootCam/main &amp;amp;&#xA;&#xA;StartupNotify=true&#xA;&#xA;Terminal=true&#xA;Hidden=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change working directory and executed program to your desire&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;reboot pi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;tell your parents you love them&lt;/p&gt;&#xA;" OwnerUserId="20949" LastEditorUserId="16827" LastEditDate="2020-03-13T14:23:33.580" LastActivityDate="2020-03-13T14:23:33.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22701" PostTypeId="2" ParentId="22695" CreationDate="2020-03-12T13:35:40.213" Score="1" Body="&lt;p&gt;Now seems to be working fine, perhaps one of the updates fixed the problem, as I've seen that other people had a similar issue. &lt;/p&gt;&#xA;" OwnerUserId="8687" LastActivityDate="2020-03-12T13:35:40.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22702" PostTypeId="2" ParentId="22519" CreationDate="2020-03-12T18:50:52.747" Score="0" Body="&lt;p&gt;When booting up your system (be sure to plug in your ISO USB before booting) you should see a BIOS screen indicating what keyboard button to press to get into the Boot Options, in my case it's F12. From there you should be able to choose to boot into the USB Drive to run from the ISO &amp;amp; give Ubuntu a try. You may have to run your system setup from the BIOS screen (in my case it's F2) to change some settings if you don't see USB as a boot option. These keyboard shortcuts can vary based on computer &amp;amp; hardware manufacturer. I have another laptop that uses the ESC key &amp;amp; other keyboard shortcuts to access the BIOS. Let me know if this helps &amp;amp; if you need further guidance. &lt;/p&gt;&#xA;" OwnerUserId="20946" LastActivityDate="2020-03-12T18:50:52.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22703" PostTypeId="1" CreationDate="2020-03-12T20:00:59.983" Score="1" ViewCount="87" Body="&lt;p&gt;I am both a new and novice user when it comes to Linux. I recently installed Elementary alongside Windows 10 (Education), using the default install option. But on the boot menu it only gives me the option to load Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Things I have tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Turning of hibernation&lt;/li&gt;&#xA;&lt;li&gt;Making sure fast boot is turned off (had to check in bios as there is no option in Windows 10)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Things I have not tried:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Editing the registry or anything advanced along those lines&lt;/li&gt;&#xA;&lt;li&gt;Lanching Elementary and installing/updating GRUB&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I have an SSD but Windows 10 is installed on my HDD, as I got my SSD after I have had my PC for a while. The only solution that works is using Windows 10 Advanced Startup, and choosing to launch Elementary (or as it says Unbuntu) via another device/drive/partition option.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Windows 10 Education&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;x64 Based PC&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;16gb RAM&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Nvidia 1060 3GB OC Graphics Card&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Intel I5-7400&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Z270 GAMING M6 AC Motherbaord&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Anything help or advice would be appreciated. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="20952" LastActivityDate="2020-03-12T20:41:34.057" Title="No Elementary (or Unbuntu) Option in Boot menu at startup" Tags="|boot|dual-boot|startup|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22704" PostTypeId="2" ParentId="22698" CreationDate="2020-03-12T20:33:16.273" Score="2" Body="&lt;p&gt;I found this solution to my problem:&#xA;Download the Tutanota Appimage&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install the Main Menu application by running this line of code in the Terminal application:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install alacarte&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find and select the Tutanota application in the Main Menu application. I found it in the left-hand list under Internet&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Select Properties on the right-hand side&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Find the Command line and add this string to the end:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;MimeType=x-scheme-handler/mailto&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run this line of code in the Terminal application:&#xA;update-desktop-database ~/.local/share/applications&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At this point the Tutanota app should display as the default mail app if you check out settings.&lt;/p&gt;&#xA;" OwnerUserId="20946" LastActivityDate="2020-03-12T20:33:16.273" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22706" PostTypeId="1" AcceptedAnswerId="23939" CreationDate="2020-03-13T03:28:38.987" Score="2" ViewCount="43" Body="&lt;p&gt;In System Settings -&gt; Keyboard -&gt; Shortcuts -&gt; Applications, I like to bind 'Home Folder' to:&#xA;&lt;code&gt;super + E&lt;/code&gt;&#xA;and I bind Terminal to:&#xA;&lt;code&gt;super + T&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now both keybindings just open a terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried changing the 'Home Folder' keybind to a couple other combinations. These other combinations just didn't work (did nothing at all). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed it back to:&#xA;&lt;code&gt;super + E&lt;/code&gt;&#xA;afterwards and it's opening a terminal again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the same keybinding settings on my other PC (eOS) and they are still working fine. &lt;/p&gt;&#xA;" OwnerUserId="20541" LastActivityDate="2020-04-02T19:05:44.477" Title="Keyboard Shortcut for Home Folder broken" Tags="|settings|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22708" PostTypeId="2" ParentId="16861" CreationDate="2020-03-13T15:23:36.817" Score="0" Body="&lt;p&gt;1- burn elementary OS in USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2- Reboot your pc, Press F12 OR F9 (BOOT mode) then &lt;/p&gt;&#xA;&#xA;&lt;p&gt;choose FROM  UEFI BOOT: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;UEFI: INT13 (USB,0x80)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3- After installing, You need to BOOT from UEFI BOOT : ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="20962" LastActivityDate="2020-03-13T15:23:36.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22709" PostTypeId="2" ParentId="22691" CreationDate="2020-03-13T15:58:33.583" Score="1" Body="&lt;p&gt;I made it to work. In &lt;code&gt;gtk-widgets.css&lt;/code&gt; and &lt;code&gt;gtk-widgets-dark.css&lt;/code&gt; I added/edited a &lt;code&gt;.tilebar&lt;/code&gt; element with &lt;code&gt;background-image: linear-gradient()&lt;/code&gt; property. As arguments I set white color hex in white-version CSS and gray color hex in dark-version CSS. To set the unfocused window's color I used a &lt;code&gt;.tilebar:backdrop&lt;/code&gt; element with the same property but with darker color.&lt;/p&gt;&#xA;" OwnerUserId="20859" LastActivityDate="2020-03-13T15:58:33.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22710" PostTypeId="1" CreationDate="2020-03-13T16:01:09.493" Score="1" ViewCount="1125" Body="&lt;p&gt;Hi everyone here's my problem ;( &lt;a href=&quot;https://i.stack.imgur.com/0Pov3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0Pov3.png&quot; alt=&quot;My PC&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/fz0m3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fz0m3.png&quot; alt=&quot;CPU&quot;&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/TO8hJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TO8hJ.png&quot; alt=&quot;Activities&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It happens basically every time, as soon as I turn on my PC the CPU goes directly to 100% and the fan speed reaches the max (6200 rpm), I tried to reduce the fan speed but I'm not a super expert so i didn't find any way to lower it. The CPU even without applications open is always at 100%.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you suggest me something to try to solve the issue.&lt;/p&gt;&#xA;" OwnerUserId="20963" LastEditorUserId="20963" LastEditDate="2020-03-14T10:08:17.250" LastActivityDate="2023-04-07T06:07:45.900" Title="CPU and fan speed at 100% [Solved in the comments]" Tags="|settings|release-hera|macbook|cpu|processes|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22713" PostTypeId="1" CreationDate="2020-03-13T20:08:07.490" Score="1" ViewCount="22" Body="&lt;p&gt;For some reason, elementaryOS is the only Linux distro that remembers the location of applications when docking and undocking, when using multiple monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pantheon does this, every other desktop environment that I've tried does not.&lt;/p&gt;&#xA;" OwnerUserId="20966" LastActivityDate="2020-03-13T20:08:07.490" Title="What makes eOS save the layout of workspaces and apps between docking and undocking a laptop? (using multiple monitors)" Tags="|pantheon|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22714" PostTypeId="1" CreationDate="2020-03-14T00:21:09.103" Score="1" ViewCount="260" Body="&lt;p&gt;Elementary OS is hosted on sda5. Win 10 was on sda1(?). I deleted &lt;strong&gt;BOTH&lt;/strong&gt; partitions to resize sda5. I restarted my laptop and was greeted with the GRUB2 interface. I have no clue how to get back into elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="20967" LastActivityDate="2024-03-24T12:08:26.023" Title="How to load kernel from GRUB" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22716" PostTypeId="1" CreationDate="2020-03-14T01:21:16.400" Score="1" ViewCount="46" Body="&lt;p&gt;I recently did a fresh installation of Hera 5.1, and since then my laptop keyboard is unresponsive on the greeter login screen. The touchpad and wireless mouse both work, but I can't type in my password. I found a way to get it to &quot;wake up&quot; by flipping the laptop screen around into tablet mode (convertible laptop, HP), and the keyboard will work after I flip it back around to normal. I have tried installing the drivers by using the command sudo apt-get install xserver-xorg-input-all, but that didn't fix the problem. After I get it working and log in, it works fine until I restart the laptop. Any suggestions would be highly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="18719" LastActivityDate="2020-03-14T01:21:16.400" Title="Keyboard unresponsive on login" Tags="|greeter|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22717" PostTypeId="2" ParentId="21265" CreationDate="2020-03-14T02:16:34.150" Score="0" Body="&lt;p&gt;&lt;code&gt;sudo dpkg --purge linux-generic-hwe-18.04 &amp;amp;&amp;amp; sudo apt autoremove&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;worked for me.&lt;/p&gt;&#xA;" OwnerUserId="20969" LastEditorUserId="16827" LastEditDate="2020-03-14T04:54:32.693" LastActivityDate="2020-03-14T04:54:32.693" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22720" PostTypeId="1" CreationDate="2020-03-14T09:32:52.067" Score="0" ViewCount="308" Body="&lt;p&gt;I am on eOS 5.1 Hera and I can easily transfer files between my iPad 4 (iOS 10.3.3) and it works just like using iTunes. However, I have been recently trying Kubuntu 19.10 and it can't recognize the &quot;Documents&quot; folder on the iPad and can only see &quot;DCIM&quot; folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have compared the versions and packages under &lt;code&gt;libimobiledevice&lt;/code&gt; and both have only &lt;code&gt;libimobiledevice6&lt;/code&gt; installed. So I wonder, what eOS does differently than Kubuntu / Ubuntu that lets it connect to iOS devices?&lt;/p&gt;&#xA;" OwnerUserId="19949" LastActivityDate="2023-12-25T11:04:35.610" Title="How does elementaryOS manage to transfer files to and from an iOS device?" Tags="|pantheon-files|release-hera|iphone|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22722" PostTypeId="1" CreationDate="2020-03-14T12:59:33.783" Score="0" ViewCount="270" Body="&lt;p&gt;When I check for updates on AppCenter, I get an error message &quot;failed to fetch updates&quot; &#xA;W: Conflicting distribution: &lt;a href=&quot;http://ppa.launchpad.net/deadsnakes/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/deadsnakes/ppa/ubuntu&lt;/a&gt; bionic InRelease (expected bionic but got trusty)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had previously had similar problems to: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/22586/message-of-error-each-time-i-open-appcenter&quot;&gt;Message of error each time I open Appcenter&lt;/a&gt;&#xA;but fixed those as per the recommendation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using Terminal - sudo apt-get update, I get various errors from deadsnakes, but also:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;===========================&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reading package lists... Done&lt;br&gt;&#xA;W: Conflicting distribution: &lt;a href=&quot;http://ppa.launchpad.net/deadsnakes/ppa/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/deadsnakes/ppa/ubuntu&lt;/a&gt; bionic InRelease (expected bionic but got trusty)&#xA;W: Conflicting distribution: &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; bionic InRelease (expected bionic but got trusty)&#xA;W: Conflicting distribution: &lt;a href=&quot;http://ppa.launchpad.net/thierry-f/fork-michael-gruz/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/thierry-f/fork-michael-gruz/ubuntu&lt;/a&gt; bionic InRelease (expected bionic but got trusty)&#xA;N: Repository '&lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-security InRelease' changed its 'Version' value from '14.04' to '18.04'&#xA;E: Repository '&lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-security InRelease' changed its 'Suite' value from 'trusty-security' to 'bionic-security'&#xA;E: Repository '&lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-security InRelease' changed its 'Codename' value from 'trusty' to 'bionic'&#xA;N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions gratefully received.&#xA;Andy&lt;/p&gt;&#xA;" OwnerUserId="19472" LastActivityDate="2024-03-26T08:01:10.137" Title="Updating Hera: Expected bionic but got trusty" Tags="|appcenter|release-hera|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22723" PostTypeId="1" CreationDate="2020-03-14T16:11:00.457" Score="0" ViewCount="251" Body="&lt;p&gt;My laptop is Lenovo Ideapad C340 and i have installed elementary OS 5.1 Hera. The Wifi works out of the box. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;However when i updated the suggested updates from the AppCenter two days back wifi card disappeared. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i reinstall the elementary OS 5.1 Hera wifi works and if i update wifi stops. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried several methods described to correct the problem none seems to work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;my wifi card details are &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    description: Wireless interface&#xA;   product: Intel Corporation&#xA;   vendor: Intel Corporation&#xA;   physical id: 14.3&#xA;   bus info: pci@0000:00:14.3&#xA;   logical name: wlp0s20f3&#xA;   version: 00&#xA;   serial: 08:71:90:b9:86:56&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless&#xA;   configuration: broadcast=yes driver=iwlwifi driverversion=5.3.0-28-generic firmware=48.13675109.0 ip=192.168.1.190 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;   resources: irq:16 memory:b4318000-b431bfff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So i would like your help in sorting this problem. I noticed that kernel is 5.3.0-28-generic and  after the update is it 5.4 something .... it is the kernel update that breaks it ? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to fix this much appreciated. &lt;/p&gt;&#xA;" OwnerUserId="20974" LastEditorUserId="15904" LastEditDate="2020-03-17T17:48:57.960" LastActivityDate="2024-01-02T02:04:41.880" Title="New Update of elementary OS 5.1 Hera breaks Wifi Card" Tags="|wifi|release-hera|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22724" PostTypeId="2" ParentId="22720" CreationDate="2020-03-14T16:14:15.227" Score="0" Body="&lt;p&gt;I think I got it. It is not Kubuntu but Dolphin that causes the problem. I've tested Nemo and Nautilus and they both allow you to access the &quot;Documents&quot; folder in iOS but for some reason Dolphin doesn't do the job. So I just use one of the former when I'm transferring files through the wire.&lt;/p&gt;&#xA;" OwnerUserId="19949" LastActivityDate="2020-03-14T16:14:15.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22726" PostTypeId="1" CreationDate="2020-03-14T17:28:40.290" Score="0" ViewCount="538" Body="&lt;p&gt;I work on 1366x768 laptop with elementary OS 5.1.2 Hera and unable to get access to the very last icons on the system settings window. The window is oversized. I tried to resize or maximize the window, but size cannot be decreased, only increased. Does someone faced with the similar issue?&lt;/p&gt;&#xA;" OwnerUserId="20978" LastEditorUserId="15904" LastEditDate="2020-03-17T17:48:48.057" LastActivityDate="2020-06-18T12:54:13.580" Title="System settings window resize" Tags="|settings|release-hera|resolution|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22729" PostTypeId="2" ParentId="22714" CreationDate="2020-03-15T00:44:08.820" Score="0" Body="&lt;p&gt;Wait, you deleted both your Win/eOS partitions? If so, you shouldn't have anything to boot to.... Or do you have any other OS in another partition?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you still have anything in there, you should be able to run a shell from GRUB2 and list running the 'ls' command (shell&gt; ls)  and see what's still there. Then you should be able to edit on of your boot settings to assign the right partition to your boot command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might want to grab some references from &lt;a href=&quot;https://superuser.com/questions/1258525/how-do-i-list-my-devices-in-grub&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-15T00:44:08.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22731" PostTypeId="1" CreationDate="2020-03-15T22:16:18.193" Score="0" ViewCount="5005" Body="&lt;p&gt;I installed a fresh copy of elementary os 5.1.2 Hera and my gpu fan is cranked up to about 50% all the time it sounds like. I have a feeling it has to do with it missing a driver. So how can I install a driver for an HD 7570 graphics card?&lt;/p&gt;&#xA;" OwnerUserId="20989" LastEditorUserId="15904" LastEditDate="2020-03-17T17:48:50.693" LastActivityDate="2024-03-27T03:09:36.120" Title="How do I install AMD drivers?" Tags="|release-hera|graphic-drivers|drivers|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22733" PostTypeId="1" CreationDate="2020-03-16T10:04:48.073" Score="0" ViewCount="35" Body="&lt;p&gt;I have set up a USB with eOS using Rufus and everything goes smoothly up to the point where the OS loads from USB. It hangs after ~7s during system load, with last driver/module load log on screen (last logs are from USB devices and audio)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried different Rufus settings, tried BalenaEtcher as well, same thing. Tried acpi=off as well. Read about the MCE issue with Zen 2 so I used mce=off too, nothing changed. If it helps, Mint also doesn't boot. I suspect it's a hardware issue, as I have a fairly new system:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;AMD Threadripper 3960X, &#xA;G.SKILL 4x 16GB DDR4 3600MHz, &#xA;2x Sabrent PCI-E 4.0 2TB NVMe drive, &#xA;Seagate Barracuda Pro 12TB, &#xA;EVGA GeForce RTX 2080Ti&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Newest eOS downloaded today (5.1.2 20200204).&lt;/p&gt;&#xA;" OwnerUserId="20996" LastEditorUserId="20996" LastEditDate="2020-03-16T16:05:39.170" LastActivityDate="2020-03-16T16:05:39.170" Title="Can't boot from USB, hangs on system load" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22737" PostTypeId="1" CreationDate="2020-03-16T19:51:09.920" Score="1" ViewCount="1061" Body="&lt;p&gt;Since kernel 4.15.0.55 update, I'm getting stuck at boot. No kenel after .55 can't boot. At recovery mode system halts at this message:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;r8169 can't disable ASPM OS doesn't have ASPM control&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've found this is a long lasting bug. &#xA;I've installed r8168-dkms (8.045.08-2ubuntu1) with synaptic package manager, but I've seen r8168 don't replace r8169, and boot halts at same point.&#xA;I've found a forum post pointing to install r8168-dkms_8.047.02-1_all.deb, instead, but I'm not sure about this workaround.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    dmesg | grep r816&#xA;    [    2.909400] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded&#xA;    [    2.909416] r8169 0000:03:00.2: can't disable ASPM; OS doesn't have ASPM control&#xA;    [    2.910627] r8169 0000:03:00.2 eth0: RTL8402 at 0x        (ptrval), 1c:b7:2c:0f:6a:c8, XID 04000800 IRQ 89&#xA;    [    3.050940] r8169 0000:03:00.2 enp3s0f2: renamed from eth0&#xA;    [  214.785516] r8169 0000:03:00.2 enp3s0f2: link down&#xA;    [ 5487.302121] r8169 0000:03:00.2 enp3s0f2: link down&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also I've found a solution at github &quot;&lt;a href=&quot;https://github.com/KastB/r8169&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux driver for Realtek network chips with enabled ASPM&lt;/a&gt;&quot;, but not tried yet&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice?&lt;/p&gt;&#xA;" OwnerUserId="21002" LastEditorUserId="21002" LastEditDate="2020-03-19T23:10:10.133" LastActivityDate="2024-03-29T10:05:00.463" Title="Stuck at boot: R8169 can't disable ASPM [Solved]" Tags="|boot|networking|drivers|kernel|black-screen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22738" PostTypeId="2" ParentId="22647" CreationDate="2020-03-16T20:17:59.743" Score="0" Body="&lt;p&gt;та же проблема, но у меня Убунту 18,04. &#xA;5.3.0-40 - не грузится, а предыдущее норм (5.3.0-40)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ноут такой же.&lt;/p&gt;&#xA;" OwnerUserId="21006" LastActivityDate="2020-03-16T20:17:59.743" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22739" PostTypeId="2" ParentId="22186" CreationDate="2020-03-16T21:51:20.803" Score="1" Body="&lt;p&gt;This worked for me in Elementary 5.1.2 Hera:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cp /etc/xdg/autostart/indicator-application.desktop .config/autostart/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change line 7 from:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then I downloaded &lt;a href=&quot;https://launchpad.net/~yunnxx/+archive/ubuntu/elementary/+files/wingpanel-indicator-ayatana_2.0.3+r30+pkg17+r1~daily~ubuntu18.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;this package&lt;/a&gt; and installed it with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i wingpanel-indicator-ayatana_2.0.3+r30+pkg17+r1~daily~ubuntu18.04.1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After logging out and back in again, the problematic applications (slack, nextcloud, etc) worked fine.&lt;/p&gt;&#xA;" OwnerUserId="280" LastActivityDate="2020-03-16T21:51:20.803" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22740" PostTypeId="2" ParentId="22722" CreationDate="2020-03-16T22:19:18.350" Score="0" Body="&lt;h1&gt;1. backup your sources.list&lt;/h1&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo cp /etc/apt/sources.list /etc/apt/sources.list.bak&lt;/code&gt;&lt;/p&gt;&#xA;&lt;h1&gt;2. change repos to bionic&lt;/h1&gt;&#xA;&lt;p&gt;&lt;code&gt;sudoedit /etc/apt/sources.list&lt;/code&gt; and replace &lt;code&gt;trusty&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt;. Probably some source lines are not the same for trusty and bionic so if you  still have errors for them you better remove these repositories from your sources list, the safest way is by putting a &lt;code&gt;#&lt;/code&gt; in front of each line.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-03-16T22:19:18.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22741" PostTypeId="2" ParentId="22731" CreationDate="2020-03-17T03:49:33.130" Score="0" Body="&lt;p&gt;The eOS distribution already has the Open Source AMD drivers included in the MESA and the Linux Kernel. If you wish, you can download and install the FULL AMD Drivers (&lt;a href=&quot;https://linuxconfig.org/how-to-install-the-latest-amd-radeon-drivers-on-ubuntu-18-04-bionic-beaver-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;follow this tutorial&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-17T03:49:33.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22744" PostTypeId="1" CreationDate="2020-03-17T11:43:52.570" Score="1" ViewCount="22" Body="&lt;p&gt;I have a dual boot dell 5810 with windows and elementery os on different physical drives. everything was fine until i installed vpn on the windows installation. now my wired internet in elementery says it is connected but no data comes through; no pages can load in the browser and app centre cannot find repositories. &#xA;i can still connect to the internet as normal from the windows installation so i don't think it is hardware.&#xA;can anyone give some suggestions on how to get it working again ?, &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i tried uninstalling the vpn in windows, but elementery still won't connect&lt;/p&gt;&#xA;" OwnerUserId="21012" LastEditorUserId="21014" LastEditDate="2020-03-17T17:49:26.567" LastActivityDate="2020-03-17T17:49:26.567" Title="wired internet stops working after install VPN in windows on dual boot pc" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22747" PostTypeId="2" ParentId="22415" CreationDate="2020-03-17T16:06:20.300" Score="1" Body="&lt;p&gt;I had this issue with my printer (Epson WF-4740). I removed the printer, downloaded and installed the latest EPSON driver for my model (&lt;a href=&quot;http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://download.ebz.epson.net/dsc/search/01/search/?OSC=LX&lt;/a&gt;), and re-added the printer again and I was able to print normally.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="21016" LastActivityDate="2020-03-17T16:06:20.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22751" PostTypeId="2" ParentId="15923" CreationDate="2020-03-18T08:58:35.870" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;There's a shell script (/etc/profile.d/gtk-csd.sh) that exports GTK_CSD=1. I would highly recommend not deleting this shell script as it makes all of the dialog boxes look a bit weird and breaks the open file/folder dialog in some cases.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;see this issues: &lt;a href=&quot;https://github.com/elementary/gala/issues/244#issuecomment-438259702&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/244#issuecomment-438259702&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21021" LastActivityDate="2020-03-18T08:58:35.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22756" PostTypeId="1" CreationDate="2020-03-19T01:33:12.823" Score="0" ViewCount="927" Body="&lt;p&gt;I have a question about out-of-the-box font rendering in Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see in the screenshot below, letters don't look very good.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;They don't look very smooth, seem to vary in their thickness.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is this normal? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I watched some reviews of Elementary OS on YouTube, their fonts looked a lot better than this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is the default rendering, what can be done to make this situation better?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dbRS9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dbRS9.png&quot; alt=&quot;image of EOS wiki page on my desktop&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/m8tw5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/m8tw5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21030" LastActivityDate="2020-11-12T22:49:55.747" Title="font rendering in Hera" Tags="|release-hera|fonts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22757" PostTypeId="2" ParentId="22682" CreationDate="2020-03-19T06:43:35.130" Score="1" Body="&lt;p&gt;I use PhpStorm on a Mac (iMac), and on Linux (laptop), day in, day out, and so feel your pain of having to change shortcuts depending on which computer I'm at.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, because the Super key on Linux is very much for handling window/desktop operations rather than app specific operations, and is in a different position on my keyboard compared to the Apple key, I've decided not to use the Super key for app stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A lot of the PhpStorm shortcuts are the same across the default Windows (Linux) and macOS setups. This includes things like Alt-F12 for toggling the built in terminal, or Alt-9 for Version Control panel etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But otherwise, a lot of operations switch to Ctrl instead of Apple key, and I don't find that too hard to remember after a minute or two of switching computers, what with the keyboard being different layout too.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also just the other day installed the &quot;Key Promoter X&quot; plugin in PhpStorm, originally to try and get me to use shortcuts more often, but it really helps in discovering the differences too through it's balloon pop-ups and panel I can check.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry I don't have technical &quot;solution&quot; here, but hopefully it still helps a little, even if it's just moral support from another dealing with the same issue!&lt;/p&gt;&#xA;" OwnerUserId="2753" LastActivityDate="2020-03-19T06:43:35.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22760" PostTypeId="1" CreationDate="2020-03-19T09:26:13.670" Score="0" ViewCount="91" Body="&lt;p&gt;I have been using elementaryOS with dual boot for quite some time. I first installed eOS as dual boot next to my Windows installation in order to test things and not delete my Windows installation.&#xA;But now I am so happy with eOS, that I want to upgrade my dual boot installation into a single boot (only elementary) installation. And is there a way to enable then full drive encryption?&lt;/p&gt;&#xA;" OwnerUserId="20911" LastActivityDate="2024-03-29T02:03:55.433" Title="How can I upgrade my dual boot to a full installation with drive encryption?" Tags="|system-installation|dual-boot|full-disk-encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22761" PostTypeId="1" CreationDate="2020-03-19T14:37:24.330" Score="0" ViewCount="311" Body="&lt;p&gt;I tried to install Bitdefender Antivirus protection on the last Elementary version 5.1.2. but it did not work with the command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I want to use bitdefender, because I use it for my W10 and Mac devices)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Q1 is it possible at all?&#xA;Q2 how do I do this when it is possible?&#xA;Q3 if it is not possible with bitdefender , is there an alternative?&lt;/p&gt;&#xA;" OwnerUserId="21039" LastEditorUserId="15904" LastEditDate="2020-03-22T06:46:43.160" LastActivityDate="2024-04-06T16:01:15.137" Title="Install Antivirus protection Software (bitdefender) on elementary OS 5.1.2 Hera" Tags="|software-installation|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22762" PostTypeId="2" ParentId="22760" CreationDate="2020-03-19T14:41:22.510" Score="0" Body="&lt;p&gt;The easiest way is to backup your data, wipe the disk, and reinstall elementary os.  Full disk encryption is available as an option when you reinstall. &lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-03-19T14:41:22.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22764" PostTypeId="1" CreationDate="2020-03-19T21:09:11.627" Score="0" ViewCount="145" Body="&lt;p&gt;I have tried several times to uninstall this OS by installing another OS onto the HD, but each time it has failed at some point. Some installers do not recognize the partition, while others crash when I try to edit it in any way. This OS is way too watered down and not useful to ask for money yet alone act as a virus on my hd. Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="21045" LastActivityDate="2023-04-06T08:02:25.277" Title="How do I uninstall this OS?" Tags="|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22766" PostTypeId="2" ParentId="22764" CreationDate="2020-03-19T23:02:31.407" Score="0" Body="&lt;p&gt;When you would install a new OS, try Debian instead elementaryOS if you are looking for a very stable OS, you should delete all partitions, or let automatic installer work.&lt;/p&gt;&#xA;" OwnerUserId="21002" LastActivityDate="2020-03-19T23:02:31.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22767" PostTypeId="2" ParentId="22737" CreationDate="2020-03-19T23:08:18.443" Score="0" Body="&lt;p&gt;I have installed Linux-generic-hwe-18.04, and now I can boot without any problem. It has been solved since kernel 4.19&lt;/p&gt;&#xA;" OwnerUserId="21002" LastActivityDate="2020-03-19T23:08:18.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22772" PostTypeId="2" ParentId="22723" CreationDate="2020-03-20T08:52:44.110" Score="0" Body="&lt;p&gt;&quot;I tried several methods described to correct the problem none seems to work. &quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can you explain a bit more?&lt;/p&gt;&#xA;" OwnerUserId="21002" LastActivityDate="2020-03-20T08:52:44.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22774" PostTypeId="1" CreationDate="2020-03-20T11:10:54.253" Score="0" ViewCount="68" Body="&lt;p&gt;I'm having serious trouble installing Elementary OS on my computer. I had multiple attempts and reached a dead end:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - At first I tried using rufus and chose ISO instead of DD. The install kept saying that it couldn't find instalation media&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - I then changed bios SATA option to AHCI and added nvme_load=YES to the options before booting elementary, it recognized but stopped after inputing the user name and password with Error 5 Input/Output &lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 - After this I tried to burn the image with DD option on rufus, now I get io.elementary.initial-setup no such file... regardless of what options I chose for the bootloader&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is becoming really frustrating as I've been at this for days. I created bootable pendrives in multiple computers to no avail, I checked the Sha256 and is ok and I downloaded multiple times the image from the website.&#xA;Furthermore, the drive worked well when windows 10 was installed but I cant go back to windows because the drive was formatted.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help me out, I can't use the computer to work or study.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you so much!&lt;/p&gt;&#xA;" OwnerUserId="21053" LastActivityDate="2024-03-29T23:05:40.687" Title="Unable to install Elementary OS on Samsung m2 970 evo nvm drive on Asus FX505GD" Tags="|asus|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22775" PostTypeId="1" CreationDate="2020-03-20T11:29:37.087" Score="0" ViewCount="188" Body="&lt;p&gt;when i boot with usb, no problem, wifi works, one installed, no wifi adapter is found, it's an intel wifi device.&#xA;I don't understand how come it can work with live usb and no more once installed !!&lt;/p&gt;&#xA;" OwnerUserId="21051" LastActivityDate="2024-02-06T17:04:45.557" Title="no wifi adapter found after install" Tags="|wifi|intel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22776" PostTypeId="1" AcceptedAnswerId="22783" CreationDate="2020-03-20T13:29:59.813" Score="2" ViewCount="274" Body="&lt;p&gt;How can I remove the battery indicator on elementary OS 5.1.2 Hera? I am on a desktop computer, so I don't need that indicator. It is showing up, because I have a Bluetooth mouse, but it is always showing 55% remaining, so it is not useful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your answers!&lt;/p&gt;&#xA;" OwnerUserId="21056" LastActivityDate="2020-03-20T19:24:14.640" Title="Remove battery indicator icon" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22777" PostTypeId="1" AcceptedAnswerId="22884" CreationDate="2020-03-20T14:04:26.757" Score="1" ViewCount="905" Body="&lt;p&gt;This may have been caused by external, manually added software repositories or a corrupted sources file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I see this question has been asked a few times - I mean no disrespect - just wondering what the best answer is and if it is still the same. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My screen is exactly as shown here: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15660/failed-to-fetch-updates-how-to-fix-corrupt-source-file&quot;&gt;Failed to fetch updates : How to fix corrupt source file&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it just seems weird to be adding some personal ppa to solve it. &#xA;But then again maybe philip.scott is the right place?  Just want someone to tell me it is safe and the current solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks so much&#xA;Frank &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS - here is the entire listing of my exact error pop up:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://packages.elementary.io/appcenter hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21055" LastEditorUserId="16827" LastEditDate="2020-03-20T17:39:56.573" LastActivityDate="2020-05-11T05:26:07.950" Title="New install of Elementary OS - Failed to Fetch Updates" Tags="|system-installation|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22778" PostTypeId="2" ParentId="22774" CreationDate="2020-03-20T15:55:23.393" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;Try etcher&lt;/li&gt;&#xA;&lt;li&gt;Make sure the USB drive appears in the boot options in your BIOS. If not, fiddle around with the BIOS settings until it does.  Select that it boots first and is the only boot option.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-03-20T15:55:23.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22783" PostTypeId="2" ParentId="22776" CreationDate="2020-03-20T19:24:14.640" Score="2" Body="&lt;p&gt;Just do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get remove wingpanel-indicator-power&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;killall wingpanel&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="2943" LastActivityDate="2020-03-20T19:24:14.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22784" PostTypeId="2" ParentId="18554" CreationDate="2020-03-20T19:24:14.710" Score="1" Body="&lt;p&gt;I have written a custom script that will do as shown below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/t0egk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t0egk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Script:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/env bash&#xA;while true&#xA;do&#xA;    export DISPLAY=:0.0&#xA;    battery_percent=$(acpi -b | grep -P -o '[0-9]+(?=%)')&#xA;    if on_ac_power; then&#xA;        if [ &quot;$battery_percent&quot; -gt 98 ]; then&#xA;            notify-send --app-name=battery &quot;Battery full.&quot; &quot;Level: ${battery_percent}% &quot;&#xA;        fi&#xA;    else&#xA;        if [ &quot;$battery_percent&quot; -lt 15 ]; then&#xA;            notify-send --app-name=battery &quot;Battery low.&quot; &quot;Level: ${battery_percent}% &quot;&#xA;        elif [ &quot;$battery_percent&quot; -lt 10 ]; then&#xA;            notify-send --app-name=battery &quot;Battery Critical.&quot; &quot;Level: ${battery_percent}% &quot;&#xA;        fi&#xA;    fi&#xA;    sleep 300 # (5 minutes)&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Installation:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install acpi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save above script as &quot;&lt;em&gt;battery_notification.sh&lt;/em&gt;&quot; under &quot;&lt;em&gt;/usr/local/bin&lt;/em&gt;&quot;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /usr/local/bin/battery_notification.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Run Script at start-up:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open &lt;strong&gt;System Setting&lt;/strong&gt; -&gt; &lt;strong&gt;Applications&lt;/strong&gt; -&gt; &lt;strong&gt;Startup&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Click &lt;strong&gt;Add&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Enter full path &lt;code&gt;/usr/local/bin/battery_notification.sh&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q0ci8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q0ci8.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17867" LastEditorUserId="17867" LastEditDate="2020-03-20T19:57:43.557" LastActivityDate="2020-03-20T19:57:43.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22786" PostTypeId="1" CreationDate="2020-03-21T02:14:59.803" Score="0" ViewCount="208" Body="&lt;p&gt;I was attempting to fix a full root drive today and when I restarted my computer, the background was black, all of my settings are missing, my taskbar is back to the original installation options (though my apps seem to still be there), and all my files are missing (home folders all empty). Does anyone know what I might have done and how I might fix it (or if it's possible)? My main concern is retrieving the files, as much as I'd love if I could avoid a clean reinstall. I have been using Elementary OS and Ubuntu for quite a while but am still quite basic when it comes to tinkering under the hood.&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="21064" LastActivityDate="2024-04-06T22:02:00.313" Title="Everything missing in Elementary OS" Tags="|system|filesystem|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22790" PostTypeId="2" ParentId="22764" CreationDate="2020-03-21T21:34:07.607" Score="1" Body="&lt;p&gt;You may try booting from a live cd, you can use elementary or ubuntu or other, and use the disk utility to format or delete the partitions. Then after format or delete the hard disk, try to reboot with another os.&lt;/p&gt;&#xA;" OwnerUserId="21033" LastActivityDate="2020-03-21T21:34:07.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22791" PostTypeId="2" ParentId="22625" CreationDate="2020-03-21T23:09:12.723" Score="0" Body="&lt;p&gt;Same issue for me, did you solve it ? &#xA;Read somewhere restarting Gala will help. Tried it but obviously won't know if it's working till shortcuts don't work again. &lt;/p&gt;&#xA;" OwnerUserId="21071" LastActivityDate="2020-03-21T23:09:12.723" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22795" PostTypeId="1" CreationDate="2020-03-22T11:15:24.633" Score="0" ViewCount="145" Body="&lt;p&gt;What is the best over-all recovery program/procedure&lt;br&gt;&#xA;for elementary ?&lt;br&gt;&#xA;(Is the a way to backup in a way that the instance (system + my files) is fully recovered ? from external disk)&lt;br&gt;&#xA;Ilan  &lt;/p&gt;&#xA;" OwnerUserId="21079" LastActivityDate="2024-04-02T02:00:40.203" Title="Best recovery for elementry os" Tags="|elementary-project|backup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22796" PostTypeId="2" ParentId="22627" CreationDate="2020-03-22T14:03:03.653" Score="0" Body="&lt;p&gt;well i think this gonna work, you can create a archive .sh with root permissions with this comand &lt;strong&gt;sudo touch att_sis.sh&lt;/strong&gt;. run this command on the folder that you know. open with this command &lt;strong&gt;sudo nano att_sis.sh&lt;/strong&gt;, this command will open the archive on terminal and type it this commands &lt;strong&gt;sudo apt-get update &amp;amp;&amp;amp; &#xA;sudo apt-get upgrade -y &amp;amp;&amp;amp; sudo apt autoremove -y&lt;/strong&gt; save and close the archive, after this in the same terminal run this command &lt;strong&gt;sudo chmod +x att_sis.sh&lt;/strong&gt; after this go to config menu -&gt; apps -&gt; boot on the bottom will have a symbol to add program to your boot click there and select command line and type &lt;strong&gt;cd /home/you_user/pathToTheArchive &amp;amp;&amp;amp; ./att_sis.sh&lt;/strong&gt;. Doing this every boot of the system he will search for update, do the upgrade and remove unused packages &lt;/p&gt;&#xA;" OwnerUserId="21081" LastActivityDate="2020-03-22T14:03:03.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22797" PostTypeId="1" CreationDate="2020-03-22T14:42:22.087" Score="0" ViewCount="902" Body="&lt;p&gt;I have posted similar questions about Hidpi scaling in past, and despite the best efforts here; nothing worked, and therefore, elementary OS is kept as a interest.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;when i connect to Epic Citrix Server; it doesn't scale.  Unfortunately, elemantary OS only scales via integer so 200%(which is a separate problem as it can't do 150%).   But when I connect, i can't do the 200% scaling.  on a 5K ultrawide monitor, 100% scaling is not usable.  When I do the same with Windows 10 (desktop), MacOS (laptop) both of which scale perfectly (both integer and fractionally).  This always result in me using elementary OS as a interesting side project than actually a day to day OS.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is part of the reason why I'm not a big fan of fractionated, tiny OSes, where only a few people are working on the project.  Some basic things, or basic software used daily is often not available or has reduced functionality.  Some post from Mr. Fiore or Bleade suggest that they have no plans to A.  include fractional scaling, or B. fix scaling in general.  &lt;/p&gt;&#xA;" OwnerUserId="17902" LastActivityDate="2024-04-01T02:02:25.363" Title="Citrix and hidpi scaling" Tags="|scaling|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22798" PostTypeId="1" CreationDate="2020-03-22T14:50:49.440" Score="0" ViewCount="248" Body="&lt;p&gt;I recently dual-booted my Asus Zenbook UX480 with Elementary OS Hera and I am very happy with it in general. I tried plugging in a second monitor with HDMI and it doesn't quite work as it should. As I understand it, it swaps between mirrored and extended mode automatically and constantly. First, the laptop screen is normal and the second monitor is black. Then, the laptop monitor goes black for a split second and then both screens turn on. Less than a second later, it goes back to only the laptop screen. After much frustration from it flashing back and forward, I have discovered that keeping CTRL held down stops the switch and it stops on either one or two monitors. From there, I can enter the screen settings and enter the one I want. However, when I release CTRL, it starts flashing back and forward again. To my surprise, it doesn't flash and behaves just as it should sometimes, but after a restart of my PC, it is back. I am thinking it could be some kind of graphics drivers, or settings that is wrongly configured. For the record, when I boot into my Win10 instead, it works just fine.&#xA;If I can't fix this soon, it'll probably have to be another kind of linux that'll be my go-to, which is a shame since I love elementary for everything else.&lt;/p&gt;&#xA;" OwnerUserId="21082" LastEditorUserId="15904" LastEditDate="2020-03-26T12:30:16.543" LastActivityDate="2024-04-05T13:05:40.723" Title="Dual monitor mode switch" Tags="|display|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22799" PostTypeId="1" CreationDate="2020-03-22T16:34:56.423" Score="0" ViewCount="114" Body="&lt;p&gt;My elementary os started to work very slowly.&lt;br&gt;&#xA;Is there monitoring tools or any other way I can see why ?&lt;br&gt;&#xA;The problem persisted also after reinstalling the OS.&lt;br&gt;&#xA;The following is what I did:&lt;br&gt;&#xA;1. Install Elementry&lt;br&gt;&#xA;2. Install Libre Office&lt;br&gt;&#xA;3. Install InSync to google drive&lt;br&gt;&#xA;4. Start work on a documents in Libre Office &#xA;In addition all the applications I try to exit say That they cannot exit and ask whether to wait or force quit. &#xA;Ilan&lt;/p&gt;&#xA;" OwnerUserId="21079" LastActivityDate="2024-04-01T06:03:20.387" Title="Elementry OS works slowly" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22800" PostTypeId="2" ParentId="22799" CreationDate="2020-03-22T16:50:10.027" Score="0" Body="&lt;p&gt;Open a terminal window and run &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ htop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Take a look at the process consuming the most amount of CPU time and you might terminate them using the 'kill' command follwoing the proces id, such as:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ kill 1234&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-22T16:50:10.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22801" PostTypeId="2" ParentId="22798" CreationDate="2020-03-22T16:54:55.950" Score="0" Body="&lt;p&gt;Try setting them manually using xrandr. First identify the IDs of your monitors by just running it from a commandline &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ xrandr &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;You should see the names such as eDP-1, DP-1-1 etc. Then run the commands to set them as you wish, for example:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ xrandr --output eDP-1 --auto --output HDMI-1 --mode 1920x1080&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;That will default automatic resolution to eDP (normally laptop display) and fullhd for an external display named HDMI-1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will turn off one display:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;$ xrandr --output HDMI-1 --off --output HDMI-2 --auto&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There's a good wiki about xrandr &lt;a href=&quot;https://wiki.archlinux.org/index.php/Xrandr&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-22T16:54:55.950" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22802" PostTypeId="2" ParentId="22797" CreationDate="2020-03-22T16:59:27.670" Score="0" Body="&lt;p&gt;Sadly, this is something I know very very well :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem lies more in the Citrix Workspace (Former receiver) client rather than in eOS per se. I've tried manually scalling the GTK components out of it but since it was coded with a now-deprecated  library, it won't work as it might with other apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your only choice is to use full resolution (which will require the server-side or destination VDI support) and scale it within the Windows DPI scaling method). But if you use a 5K resolution monitor, chances are that the server policies are defaulting at a maximum graphic memory that won't allow you to go past than 4k Resolution at 32bit color (about 32MBytes of graphic memory per session) and even though some might support 64MB per session, that's normally for dual-4k monitors.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll 100% need Citrix Admin-side support to accomplish this, but as of &lt;strong&gt;today&lt;/strong&gt;, the Citrix Client won't scale on your eOS sadly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo Zampatti&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-22T16:59:27.670" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22805" PostTypeId="1" CreationDate="2020-03-22T18:15:34.037" Score="0" ViewCount="165" Body="&lt;p&gt;New install of eos.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;On every boot it shows a temporary icon that says...Gala Background services&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The icon disappears after about 10 seconds.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I disable this????&lt;/p&gt;&#xA;" OwnerUserId="21084" LastActivityDate="2020-03-28T09:32:10.913" Title="Gala Background services Icon" Tags="|gala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22806" PostTypeId="2" ParentId="22805" CreationDate="2020-03-22T19:51:10.480" Score="2" Body="&lt;p&gt;If you load appeditor from the App center you can go into Gala Background Services and deselect &quot;Show in launcher&quot;.  I had the same problem last week.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-03-22T19:51:10.480" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22807" PostTypeId="2" ParentId="22795" CreationDate="2020-03-23T14:08:14.423" Score="0" Body="&lt;p&gt;I have had success using Timeshift for the elementary os system files and Back in Time for my personal files. I go over my reasoning and the procedure I use in &lt;a href=&quot;https://www.youtube.com/watch?v=nbly4RS_EZc&quot; rel=&quot;nofollow noreferrer&quot;&gt;this video.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-03-23T14:08:14.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22808" PostTypeId="1" AcceptedAnswerId="22882" CreationDate="2020-03-23T16:55:42.660" Score="0" ViewCount="112" Body="&lt;p&gt;My computer (desktop PC) has started showing a battery indicator as if it was a laptop. I have tried restarting and checking for system updates to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/mII6F.png&quot; alt=&quot;Desktop&quot;&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It also seems to be confused about how much &quot;battery&quot; there is left.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="21095" LastActivityDate="2020-03-28T11:09:34.703" Title="Desktop showing a battery indicator, computer does not have a battery" Tags="|pantheon|desktop-environment|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22811" PostTypeId="1" CreationDate="2020-03-24T06:49:19.400" Score="0" ViewCount="123" Body="&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; wine-stable : Depends: wine-stable-i386 (= 5.0.0~eoan)&#xA;               Depends: wine-stable-amd64 (= 5.0.0~eoan) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;snawaz@snawaz-Presario-CQ56-Notebook-PC:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21105" LastEditorUserId="15904" LastEditDate="2020-03-26T12:30:59.583" LastActivityDate="2020-03-26T12:30:59.583" Title="tried very hard to install wine but it always shows this" Tags="|wine|dependencies|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22814" PostTypeId="1" CreationDate="2020-03-24T10:35:25.540" Score="2" ViewCount="555" Body="&lt;p&gt;Hi I have accidentally removed all &lt;code&gt;trusted.pgp&lt;/code&gt; even directory with &lt;code&gt;trusted.pgp.d&lt;/code&gt; in &lt;code&gt;/etc/apt/&lt;/code&gt;. But I have restored with &lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 3B4FE6ACC0B21F32&lt;/code&gt; for example and try to add all key but when i try to upgrade, every thing seems good, but for some reason, some software return error like,&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;No such key 'button-layout' in schema 'org.gnome.mutter:Pantheon' as&#xA;  specified in override file&#xA;  '/usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override';&#xA;  ignoring override for this key.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;There's another error that I don't take note of.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix this??&lt;/p&gt;&#xA;" OwnerUserId="21110" LastEditorUserId="16827" LastEditDate="2020-03-26T12:44:19.850" LastActivityDate="2020-03-26T12:44:19.850" Title="No such key '...' in schema" Tags="|updates|pantheon-terminal|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22816" PostTypeId="1" AcceptedAnswerId="22819" CreationDate="2020-03-24T13:45:17.910" Score="1" ViewCount="1538" Body="&lt;p&gt;I've set up my completely computer-illiterate dad up with Elementary OS after his win7 support expired recently. Weirdest thing: he's suddenly super interested in the OS, and actually feels safe enough to try things out for himself. Whereas before he would just get annoyed/intimidated/confused by the mess of icons in front of him. Awesome stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was planning on setting up a remote desktop for him so I could do tech support from my home. Now due to corona I'll have to do that remotely and talk my parents through it on the phone. Chrome Remote Desktop seems to be the most obvious candidate because it saves having to talk him through forwarding ports by phone. So that's the route I'll be taking for now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once I'm in though, I wonder if there's a better Remote desktop host I can set up. I understand VNC doesn't play nice with pantheon. Is there a remote desktop host or server for Elementary that you can recommend? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I just successfully managed to remote in using chrome remote desktop. The connection was there, although laggy and crappy. My parent's wifi being less than great wasn't helping much. Still very much open to hearing about a better way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will probably be using remmina on the client end, but I'm flexible. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="21069" LastEditorUserId="21069" LastEditDate="2020-03-24T15:16:02.283" LastActivityDate="2022-05-22T15:14:07.873" Title="remote desktop/ screensharing in Elementary OS. Chrome remote only option?" Tags="|pantheon|vnc|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22819" PostTypeId="2" ParentId="22816" CreationDate="2020-03-24T15:22:43.303" Score="0" Body="&lt;p&gt;I'm a bit of a newb in this regard, but NoMachine works very well on my internal network.  I just don't know anything about accessing a machine on another network.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-03-24T15:22:43.303" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22822" PostTypeId="1" CreationDate="2020-03-24T17:56:49.003" Score="1" ViewCount="323" Body="&lt;p&gt;The fonts that come by-default with elementary OS do not support Urdu language text. So I had to &lt;a href=&quot;https://askubuntu.com/a/1117191&quot;&gt;install &lt;/a&gt; supporting font to render Urdu text properly.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I go to Google Chrome settings, &lt;a href=&quot;https://askubuntu.com/a/1117191&quot;&gt;set Standard Font&lt;/a&gt; as &lt;code&gt;Noto Naskh Arabic UI&lt;/code&gt; (supporting font) and Urdu texts are rendered properly in Chrome. Similarly, I &lt;a href=&quot;https://elementaryos.stackexchange.com/a/3445/20018&quot;&gt;set system fonts&lt;/a&gt; (Window Title, Interface, Document, and Monospace) to &lt;code&gt;Noto Naskh Arabic UI&lt;/code&gt; using Gnome Tweaks. This makes Urdu text in the operating system's notification panel appear properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, other apps (e.g. Ephiphany, &lt;a href=&quot;https://getstation.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Station&lt;/a&gt;, &lt;a href=&quot;https://rambox.pro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Rambox&lt;/a&gt;; I use the later two apps to use Whatsapp and Facebook Messenger on the laptop) still do not render Urdu text properly. There is no option to specify the fonts within these apps and they do not seem to import system fonts (set using Tweaks) themselves. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way I can force these apps to use system fonts?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way, &lt;a href=&quot;https://mega.nz/#F!Nd0T0bJD!4wH35bAqYQE5Szfef9zeVQ&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; are two examples of what I mean from proper and improper Urdu text rendering.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Operating system: elementary OS 5.1.2&lt;br&gt;&#xA;Laptop: Thinkpad E585&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; In Windows 10, Rambox renders Urdu text properly. So I think it imports system fonts there and system fonts of Windows 10 by-default support Urdu.&lt;/p&gt;&#xA;" OwnerUserId="20018" LastEditorUserId="20018" LastEditDate="2020-03-24T18:25:59.037" LastActivityDate="2023-05-11T17:08:05.973" Title="How to force all apps to use system fonts (the ones set using Gnome Tweaks)?" Tags="|language|epiphany|fonts|tweak-tool|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22823" PostTypeId="2" ParentId="22761" CreationDate="2020-03-24T18:03:39.160" Score="0" Body="&lt;p&gt;Bitdefender is proprietary software.  It is up to them to provide a version for Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit - I mean a home version.  they have endpoint for business users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit 2 - I should have included some alternatives.  If you are comfortable with the command line, try Sophos.  That is what I use.  Ages ago I used a trial of ESAT NOD32 and it was quite good, but a little intrusive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Consider if you really need an antivirus.  I just use it as I share a lot of files with windows computers and don't want to pass on a virus from a windows file.  there are very few actual Linux viruses.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastEditorUserId="20905" LastEditDate="2020-03-24T18:17:35.443" LastActivityDate="2020-03-24T18:17:35.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22826" PostTypeId="2" ParentId="22816" CreationDate="2020-03-24T19:25:55.703" Score="1" Body="&lt;p&gt;Have you looked at (&lt;a href=&quot;https://www.teamviewer.com/en/download/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;TeamViewer&lt;/a&gt;)? While I haven't used it on Elementary OS I did use it on Ubuntu a while ago and as I recall it seemed to work well. Just download the 64bit .deb file and install it with Eddy, gdebi, or dpkg.&lt;/p&gt;&#xA;" OwnerUserId="19632" LastActivityDate="2020-03-24T19:25:55.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22829" PostTypeId="2" ParentId="22437" CreationDate="2020-03-24T23:39:27.877" Score="1" Body="&lt;p&gt;I found out it was because it was trying to use ipv6.&lt;/p&gt;&#xA;" OwnerUserId="20664" LastActivityDate="2020-03-24T23:39:27.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22830" PostTypeId="1" AcceptedAnswerId="22881" CreationDate="2020-03-25T00:59:43.743" Score="2" ViewCount="283" Body="&lt;p&gt;first Elementary OS user here!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't use Bluetooth, so how can I remove it from the top bar. I know that I can disable it, but I want to remove it.&lt;/p&gt;&#xA;" OwnerUserId="21122" LastEditorUserId="15904" LastEditDate="2020-04-09T23:24:49.520" LastActivityDate="2020-04-09T23:24:49.520" Title="How to remove the Bluetooth icon from the topbar?" Tags="|settings|wingpanel|desktop|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22833" PostTypeId="1" CreationDate="2020-03-25T07:50:34.550" Score="1" ViewCount="18" Body="&lt;p&gt;i am kind of neewbie on linux elementary os, but it worked excellent until two days ago, when i downloaded an upgrade in appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;since then, it shows a ram swap of 6gb/2gb, and my laptop is now constantly freezing, or slowing down, when i watch movies, play music, or games. this never happened before, i'm gessing a bug in swap. i have read about etc/fstab file to be modified to render the ram swap null but it does not work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;i should have 8gb of ram, but instead my free -h command tells me that:&#xA;              total        used        free      shared  buff/cache   available&#xA;Mem:           5,7G        1,1G        3,8G         83M        842M        4,4G&#xA;Swap:            0B          0B          0B&lt;/p&gt;&#xA;&#xA;&lt;p&gt;what can i do to restore my ram to 8gb?&lt;/p&gt;&#xA;" OwnerUserId="20889" LastActivityDate="2020-03-25T07:50:34.550" Title="ram swap is slowing down laptop after 5.3.0-42 upgrade" Tags="|release-hera|swap|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22835" PostTypeId="2" ParentId="22811" CreationDate="2020-03-25T09:53:49.700" Score="1" Body="&lt;p&gt;As far I understand the issue, it is caused because of a missing dependence in Ubuntu 18.04 on which elementary OS Hera is based on. Wine after 4.5 seems to need libfaudio to be working. You can download it from the link below and use Eddy to install the package (just click on the downloaded file), but remember, this is not an official Ubuntu or elementary OS repository! Installing software from not official repositories may be a risk!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/i386/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/i386/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The files that you will need are: libfaudio0_19.07-0~bionic_amd64.deb and libfaudio0_19.07-0~bionic_i386.deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In case after installation of one of the files Eddy will not install the second (it will show that it is already installed) you will need to use the command line. In this case follow this instruction:&#xA;1. Go to the destination folder where you downloaded the file, by using the &quot;cd&quot; command. Example:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;cd /home/username/Downloads&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Then install the deb file. Example:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo dpkg -i libfaudio0_19.07-0~bionic_i386.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I found the solution by visiting the following links:&#xA;&lt;a href=&quot;https://forum.winehq.org/viewtopic.php?t=32061&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.winehq.org/viewtopic.php?t=32061&lt;/a&gt;&#xA;&lt;a href=&quot;https://forum.winehq.org/viewtopic.php?f=8&amp;amp;t=32192&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.winehq.org/viewtopic.php?f=8&amp;amp;t=32192&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21127" LastActivityDate="2020-03-25T09:53:49.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22837" PostTypeId="1" AcceptedAnswerId="22845" CreationDate="2020-03-25T10:27:46.027" Score="0" ViewCount="38" Body="&lt;p&gt;I'm using Webstorm as my IDE. Most of the time I open the IDE from the terminal. After opening the IDE it stays linked to the terminal (as shown in the image). If I close the terminal, the IDE also closes. Is there anyway to fix that. I need to separate these two.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;OS&lt;/strong&gt;: elementary OS 5.1.2 Hera x86_64&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Kernel&lt;/strong&gt;: 5.3.0-42-generic&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Terminal&lt;/strong&gt;: io.elementary.t&#xA;&lt;a href=&quot;https://i.stack.imgur.com/R2aes.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R2aes.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21128" LastEditorUserId="11882" LastEditDate="2020-05-07T12:30:24.083" LastActivityDate="2021-07-21T21:43:13.483" Title="Terminal keep linking with IDE when open the IDE from terminal" Tags="|release-hera|pantheon-terminal|ide|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22840" PostTypeId="1" AcceptedAnswerId="22854" CreationDate="2020-03-25T12:34:43.140" Score="0" ViewCount="143" Body="&lt;p&gt;Since yesterday, one update is always showing, but no update is actually there. I don't have any PPA installed, everything has been installed trough AppCenter. I tried to update everything through Terminal all, is showing as up to date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on an XPS 9550 with Hera 5.1.2.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xxjAL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xxjAL.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-03-26T15:08:13.930" Title="AppCenter is showing non-existing updates badge counter" Tags="|updates|release-hera|appcenter|notifications|notification-badge|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="22841" PostTypeId="2" ParentId="22822" CreationDate="2020-03-25T12:59:12.980" Score="1" Body="&lt;p&gt;You're going to need to edit your Fontconfig settings. Sadly, Fontconfig is very complex, so I normally only recommend this for experts, but seems you really need to. &lt;a href=&quot;https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/desktop_migration_and_administration_guide/configure-fonts&quot; rel=&quot;nofollow noreferrer&quot;&gt;This guide&lt;/a&gt; shows how to do it with a GUI tool, which might be slightly easier than editing XML manually. Good luck.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that WebKit might have other rendering bugs with Urdu fonts; if so, they should be reported on WebKit Bugzilla against the WebKitGTK component.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2020-03-25T12:59:12.980" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="22842" PostTypeId="1" AcceptedAnswerId="22879" CreationDate="2020-03-25T13:57:53.453" Score="0" ViewCount="74" Body="&lt;p&gt;First time Elementary OS user here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm having an issue with my HP Pavilion 15-cs1056. The problem is the audio poor quality, low volume and no bass. Everything works, but the sound is very flat, low and no bass.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here my soundcard info &lt;a href=&quot;http://alsa-project.org/db/?f=d047f887d16337df939323230f29a11be3e61cc9&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://alsa-project.org/db/?f=d047f887d16337df939323230f29a11be3e61cc9&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestion?&lt;/p&gt;&#xA;" OwnerUserId="21122" LastActivityDate="2020-03-28T10:40:02.077" Title="Sound issues with HP Pavilion 15-cs1056" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22843" PostTypeId="1" CreationDate="2020-03-25T22:05:37.693" Score="0" ViewCount="95" Body="&lt;p&gt;I have an interesting problem with my desktop installation of elementary OS (5.1 Hera).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Whenever I wake my system from sleep my entire screen is a mess of digital noise. Otherwise, I do not experience any screen tearing. I have not been able to find this problem posted anywhere else. Any help or advice would be greatly appreciated. Please let me know if I need to share specific system information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="21132" LastEditorUserId="15904" LastEditDate="2020-03-25T23:30:34.167" LastActivityDate="2020-12-14T09:17:28.237" Title="Screen Glitch After Sleep [Desktop]" Tags="|release-hera|suspend|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22845" PostTypeId="2" ParentId="22837" CreationDate="2020-03-25T22:58:39.690" Score="2" Body="&lt;p&gt;When opening any application throw terminal the process will the linked to the terminal that opened it.&#xA;But you can disown the process that was opened in that terminal and then close it without affecting the application by using the following syntax:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;webstorm &amp;amp; disown&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Syntax using with webstorm as example and the general case would be&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;command &amp;amp; disown&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20044" LastEditorUserId="20044" LastEditDate="2021-07-21T21:43:13.483" LastActivityDate="2021-07-21T21:43:13.483" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22846" PostTypeId="2" ParentId="22761" CreationDate="2020-03-25T23:15:59.717" Score="0" Body="&lt;p&gt;You don't need a antivirus in Linux, there are almost no viruses for Linux and when a vulnerability for the Linux kernel the community solves the problem in less than a few hours. I've been using Linux for over a three years and never caught a single virus.&lt;/p&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2020-03-25T23:15:59.717" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22854" PostTypeId="2" ParentId="22840" CreationDate="2020-03-26T15:08:13.930" Score="0" Body="&lt;p&gt;It resolved itself with today's updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think it is tied to Flatpak updates though, AppCenter is behaving weirdly when those are involved: by clicking Update All AppCenter does not asks for the user password, then closes itself. On reopening, the remaining non-Flatpak updates are still to be done, and at this point AppCenter asks for your password and proceeds as normal, staying open after done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This must have messed up the badge counter last time, maybe?&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-03-26T15:08:13.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22857" PostTypeId="2" ParentId="7832" CreationDate="2020-03-26T17:42:15.760" Score="1" Body="&lt;p&gt;You can install Gnome Control Center and Gnome Online Accounts to add your online accounts. The Gnome Control Center will not be displayed in the Applications Menu and will not cause conflicts.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You first have to install Gnome Control Center:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-control-center&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then with the following command install Gnome Online Account:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-online-accounts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then to open Gnome Control Center use the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=GNOME gnome-control-center --overview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Go to the online accounts tab and configure your accounts, hope that i helped.&lt;/p&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2020-03-26T17:42:15.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22861" PostTypeId="1" CreationDate="2020-03-27T00:09:51.690" Score="1" ViewCount="94" Body="&lt;p&gt;I have tried to deactivate the bluetooth as I did in other versions of elementary, but in elementary os hera I did not succeed, which was to edit the file &lt;strong&gt;/etc/rc.local&lt;/strong&gt; and add &lt;strong&gt;rfkill block bluetooth&lt;/strong&gt;, but in hera the file does not exist.&#xA;Could someone tell me how to disable bluetooth in hera?&lt;/p&gt;&#xA;" OwnerUserId="21152" LastEditorUserId="15904" LastEditDate="2020-03-28T12:57:58.233" LastActivityDate="2020-04-14T07:17:40.667" Title="How can I disable bluetooth by default?" Tags="|release-hera|bluetooth|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22863" PostTypeId="1" AcceptedAnswerId="23892" CreationDate="2020-03-27T08:20:48.617" Score="0" ViewCount="36" Body="&lt;p&gt;For one login, the keyboard shortcut &lt;em&gt;Command+E&lt;/em&gt; flashes a &lt;em&gt;LibreOffice&lt;/em&gt; window (I've installed it) instead of opening &lt;em&gt;Files&lt;/em&gt;.&#xA;But for another login, the shortcut opens &lt;em&gt;Files&lt;/em&gt; OK.&#xA;As far as I can tell, the shortcut has been defined the same way for both logins ... but there's obviously a difference ... which I can not pinned down: any help would be appreciated !&lt;/p&gt;&#xA;" OwnerUserId="2329" LastActivityDate="2020-03-29T10:17:22.353" Title="shortcut to Files opens LibreOffice" Tags="|pantheon-files|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22865" PostTypeId="1" AcceptedAnswerId="22868" CreationDate="2020-03-27T12:26:30.180" Score="0" ViewCount="80" Body="&lt;p&gt;I installed elementary on a spare partition to test it. now I'm ready to replace my main linux installation with elementary, doing a clean new install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;how would I go about transferring my system settings to the new installation?&lt;/p&gt;&#xA;" OwnerUserId="21158" LastActivityDate="2020-03-27T14:02:25.040" Title="How to import / transfer system settings?" Tags="|system-installation|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22867" PostTypeId="1" CreationDate="2020-03-27T13:29:42.843" Score="0" ViewCount="338" Body="&lt;p&gt;on elementary os 5.0 juuno how i do set the hotspot function that may allo to surf the web using my laptop and my sansung smartphone?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am supposed to activate the hotspot function in settings, and the one in my smartphone and am i ready to go or have to do something more?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/d5XxW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d5XxW.png&quot; alt=&quot;hotspot function in elementary os&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21159" LastActivityDate="2023-12-10T13:04:35.487" Title="How to set up a wifi hotspot connection in elementary os" Tags="|release-juno|wifi|internet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22868" PostTypeId="2" ParentId="22865" CreationDate="2020-03-27T14:02:25.040" Score="0" Body="&lt;p&gt;There are in the hidden folder (name starts with a .) in your home folder (.cache, .config, .local, etc) to view these - while in files - press CTRL + H.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just copy where the other OS installation is.&lt;/p&gt;&#xA;" OwnerUserId="21160" LastActivityDate="2020-03-27T14:02:25.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22870" PostTypeId="2" ParentId="22867" CreationDate="2020-03-27T17:30:21.390" Score="0" Body="&lt;p&gt;Actually, &lt;a href=&quot;https://www.fosslinux.com/603/how-to-create-wi-fi-hotspot-in-elementary-os.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;there is an article on fosslinux.com about it&lt;/a&gt; but it needs a manual adjustment on the connection profile file, located in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/etc/NetworkManager/system-connections/Personal_Wi-Fi_Hotspot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;replacing mode=infrastructure and change it to mode=ap &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has tryed and works?&lt;/p&gt;&#xA;" OwnerUserId="21162" LastActivityDate="2020-03-27T17:30:21.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22871" PostTypeId="2" ParentId="22867" CreationDate="2020-03-27T18:32:47.623" Score="0" Body="&lt;p&gt;It was even more simplier; just activate the wifi on elementary os, and then the router option on your smartphone, and follow the isctruction on its screen, pick the SSID that you cell tells you and the relative password and then click on the SSID showd by elementary os, supply the password and you're done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I guess it maight be a little different becaus of the smartphone you own, i have a Samsung Galaxy A8 and it worked flawlessy.&lt;/p&gt;&#xA;" OwnerUserId="21163" LastActivityDate="2020-03-27T18:32:47.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22872" PostTypeId="1" CreationDate="2020-03-27T18:39:12.300" Score="0" ViewCount="53" Body="&lt;p&gt;Don't know if there is a way, but might even be possible to have emplems on file and folders, like nautilus, or simply &lt;em&gt;files&lt;/em&gt; does not support that feature?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://diolinux.com.br/2019/07/coloque-emblemas-em-pastas-do-nautilus.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Something similar to what nautilus-emblems provides&lt;/a&gt;; any chance?&lt;/p&gt;&#xA;" OwnerUserId="21163" LastActivityDate="2023-12-10T01:05:10.570" Title="Adding emblems in Files?" Tags="|settings|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22875" PostTypeId="1" CreationDate="2020-03-28T05:53:32.707" Score="0" ViewCount="158" Body="&lt;p&gt;I installed elementary os recently, I am new to Linu&lt;a href=&quot;https://i.stack.imgur.com/lhSGV.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lhSGV.jpg&quot; alt=&quot;this is the error which shown when I tried login&quot;&gt;&lt;/a&gt;x .I don't know what exactly it works, but by the help of YouTube videos I installed and dual booted Linux(elementary os) on my dell laptop.I loved it , good one ,high speed.But recently it shown an operating system update via app store I downloaded, but it was not completed , battery drained completely before completing download.After that when I tried to login it shows error that unable to login: starting session has failed.(session returned error code 1).I found and tries a method available which was editi g some file inside os,but it was not working perfectly as editing file was not worked perfect.I am a beginner , I don't have much technical knowledge.Can anyone please help to finding out what is the actual problem!?help me to fix it!? I am attaching my problem screenshot.&lt;/p&gt;&#xA;" OwnerUserId="21161" LastActivityDate="2023-12-10T10:01:00.107" Title="Elementary os login issue" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22876" PostTypeId="2" ParentId="22805" CreationDate="2020-03-28T09:32:10.913" Score="1" Body="&lt;p&gt;Thanks for the reply.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;'Show in Launcher' was not selected...I toggled it on and then off and saved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;it worked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="3141" LastActivityDate="2020-03-28T09:32:10.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22877" PostTypeId="1" CreationDate="2020-03-28T09:39:02.310" Score="0" ViewCount="156" Body="&lt;p&gt;I have an older Sony PC with the following hardware:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel Core2Duo E7200 CPU&lt;/li&gt;&#xA;&lt;li&gt;2GB RAM&lt;/li&gt;&#xA;&lt;li&gt;320GB HDD&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Which version of elementary OS will work well on this computer?&lt;/p&gt;&#xA;" OwnerUserId="21169" LastEditorUserId="25612" LastEditDate="2023-04-26T02:40:12.073" LastActivityDate="2024-01-21T07:02:20.257" Title="Which version of elementary OS can I install?" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22878" PostTypeId="1" CreationDate="2020-03-28T10:34:58.510" Score="0" ViewCount="99" Body="&lt;p&gt;I installed Libreoffice via PPA (ppa:libreoffice/ppa) and all installed fine. Running &quot;apt upgrade&quot; afterwards, everything was fine. Then after a recent update something seems to have broken and I cannot update any applications due to Libreoffice being broken.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;FYI I have also added the below PPAs to my system since installing:&#xA;ppa:philip.scott/elementary-tweaks&#xA;ppa:papirus/papirus&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone recommend how I can fix my system? And any tips on avoiding this happening again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm getting the below error message when running &quot;apt upgrade&quot;:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;&#xA;The following packages have unmet dependencies:&#xA;&#xA;libreoffice-base : Depends: libreoffice-common (&amp;gt;= 1:6.4.0~beta1-2~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;                    Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                    Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                    Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                    Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                    Depends: uno-libs-private but it is not installed&#xA;                    Breaks: libreoffice-common (&amp;lt; 1:6.4.2~rc1~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;                    Recommends: libreoffice-java-common (&amp;gt;= 1:6.4.2~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;&#xA;libreoffice-base-core : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                         Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                         Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                         Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                         Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-base-drivers : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                            Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                            Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                            Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                            Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-calc : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                    Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                    Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                    Depends: libuno-salhelpergcc3-3 (&amp;gt;= 3.6.0~beta) but it is not installed&#xA;                    Depends: uno-libs-private but it is not installed&#xA;                    Breaks: libreoffice-common (&amp;lt; 1:6.4.2~rc1~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;&#xA;libreoffice-common : Breaks: libreoffice-core (&amp;gt;= 1:6.4~) but 1:6.4.2-0ubuntu0.18.04.2 is installed&#xA;                      Breaks: libreoffice-style-tango (&amp;gt;= 1:6.4~) but 1:6.4.2-0ubuntu0.18.04.2 is installed&#xA;&#xA;libreoffice-core : Depends: libreoffice-common (&amp;gt; 1:6.4.2) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;                    Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                    Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                    Depends: libuno-sal3 (&amp;gt;= 6.4.0~beta) but it is not installed&#xA;                    Depends: libuno-salhelpergcc3-3 (&amp;gt;= 3.6.0~beta) but it is not installed&#xA;                    Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-draw : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                    Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                    Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                    Depends: libuno-salhelpergcc3-3 (&amp;gt;= 3.6.0~beta) but it is not installed&#xA;                    Depends: uno-libs-private but it is not installed&#xA;                    Breaks: libreoffice-common (&amp;lt; 1:6.4.2~rc1~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;&#xA;libreoffice-gnome : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                     Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                     Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                     Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                     Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-gtk3 : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                    Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                    Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                    Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-impress : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                       Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                       Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                       Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                       Depends: uno-libs-private but it is not installed&#xA;                       Breaks: libreoffice-common (&amp;lt; 1:6.4.2~rc1~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;&#xA;libreoffice-math : Depends: libreoffice-core (= 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1) but 1:6.4.2-0ubuntu0.18.04.2 is installed&#xA;&#xA;libreoffice-report-builder-bin : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                                  Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                                  Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                                  Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                                  Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-sdbc-firebird : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                             Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                             Depends: libuno-sal3 (&amp;gt;= 5.1.0~alpha) but it is not installed&#xA;                             Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                             Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-sdbc-mysql : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                          Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                          Depends: libuno-sal3 (&amp;gt;= 4.2.0~rc1) but it is not installed&#xA;                          Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                          Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-sdbc-postgresql : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                               Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;                               Depends: libuno-sal3 (&amp;gt;= 4.1.0~alpha) but it is not installed&#xA;                               Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                               Depends: uno-libs-private but it is not installed&#xA;&#xA;libreoffice-writer : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;                      Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                      Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;                      Depends: libuno-salhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;                      Depends: uno-libs-private but it is not installed&#xA;                      Breaks: libreoffice-common (&amp;lt; 1:6.4.2~rc1~) but 1:6.3.5~rc2-0ubuntu0.18.04.1~lo1 is installed&#xA;&#xA;python3-uno : Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;               Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;               Depends: libuno-sal3 (&amp;gt;= 5.4.0~alpha) but it is not installed&#xA;               Depends: libuno-salhelpergcc3-3 (&amp;gt;= 3.6.0~beta) but it is not installed&#xA;               Depends: uno-libs-private but it is not installed&#xA;&#xA;ure : Depends: uno-libs-private (= 1:6.4.2-0ubuntu0.18.04.2) but it is not installed&#xA;       Depends: libuno-cppu3 (&amp;gt;= 4.4.0~alpha) but it is not installed&#xA;       Depends: libuno-cppuhelpergcc3-3 (&amp;gt;= 4.0.0~alpha) but it is not installed&#xA;       Depends: libuno-purpenvhelpergcc3-3 (&amp;gt;= 1.4.0) but it is not installed&#xA;       Depends: libuno-sal3 (&amp;gt;= 5.3.0~alpha) but it is not installed&#xA;       Depends: libuno-salhelpergcc3-3 (&amp;gt;= 3.6.0~beta) but it is not installed&#xA;       Recommends: libjuh-java but it is not installed&#xA;       Recommends: libjurt-java but it is not installed&#xA;       Recommends: libridl-java but it is not installed&#xA;       Recommends: libunoloader-java but it is not installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mark&lt;/p&gt;&#xA;" OwnerUserId="21170" LastEditorUserId="15904" LastEditDate="2020-04-09T23:25:01.913" LastActivityDate="2020-04-11T02:56:27.243" Title="Installed Libreoffice by adding the Libreoffice PPA - now system is broken" Tags="|updates|system|libreoffice|dependencies|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="22879" PostTypeId="2" ParentId="22842" CreationDate="2020-03-28T10:40:02.077" Score="0" Body="&lt;p&gt;The solution is to update to the latest kernel 5.5.13&lt;/p&gt;&#xA;" OwnerUserId="21122" LastActivityDate="2020-03-28T10:40:02.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22881" PostTypeId="2" ParentId="22830" CreationDate="2020-03-28T11:04:30.227" Score="1" Body="&lt;p&gt;Remove bluetooth indicator (in terminal):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove wingpanel-indicator-bluetooth switchboard-plug-bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you never use bluetooth, you can remove bluetooth related packages completely:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove bluetooth &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-03-28T11:04:30.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22882" PostTypeId="2" ParentId="22808" CreationDate="2020-03-28T11:09:34.703" Score="0" Body="&lt;p&gt;Do you have any device that works with battery (mouse, keyboard, etc.)?&#xA;Look at this: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/eitzaf/battery_icon_incorrect_on_a_batteryless_desktop/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/eitzaf/battery_icon_incorrect_on_a_batteryless_desktop/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-03-28T11:09:34.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="22883" PostTypeId="2" ParentId="22786" CreationDate="2020-03-28T11:14:39.277" Score="0" Body="&lt;p&gt;I think you (or the system) have been created a new user. The following command list all users:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo awk -F':' '{ print $1}' /etc/passwd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-03-28T11:14:39.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="22884" PostTypeId="2" ParentId="22777" CreationDate="2020-03-28T11:21:13.520" Score="2" Body="&lt;p&gt;Replace &lt;code&gt;hera&lt;/code&gt; to &lt;code&gt;bionic&lt;/code&gt; in the next files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/appcenter.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/patches.list &lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/elementary.list &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the following command to automate process:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find /etc/apt -type f -print0 | sudo xargs -0 sed -i 's/hera/bionic/g'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-03-28T11:21:13.520" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="22887" PostTypeId="1" AcceptedAnswerId="23882" CreationDate="2020-03-28T13:47:10.983" Score="0" ViewCount="41" Body="&lt;p&gt;I'd like to have an alternative keyboard shortcut for switching between workspaces. Is there a way to have multiple shortcuts for the same action? I guess that if I knew the system command that triggers the switch I could create a custom shortcut, but I don't. &lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2020-03-28T14:57:50.867" Title="Multiple keyboard shortcuts for switching workspaces" Tags="|keyboard-shortcuts|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23882" PostTypeId="2" ParentId="22887" CreationDate="2020-03-28T14:57:50.867" Score="0" Body="&lt;p&gt;I continued to search around and found that using xdotools you can switch between workspaces with&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;xdotool set_desktop --relative -- -1&lt;/code&gt; and &lt;code&gt;xdotool set_desktop --relative 1&lt;/code&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I added those commands as custom keyboard shortcuts and they work like a charm&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2020-03-28T14:57:50.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23884" PostTypeId="2" ParentId="22861" CreationDate="2020-03-28T16:27:26.740" Score="0" Body="&lt;p&gt;Remove the bluetooth package:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastEditorUserId="16827" LastEditDate="2020-04-13T22:02:31.457" LastActivityDate="2020-04-13T22:02:31.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23888" PostTypeId="2" ParentId="19155" CreationDate="2020-03-29T04:42:54.863" Score="0" Body="&lt;p&gt;You can disable the rotation sensor with the following commands:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo systemctl stop iio-sensor-proxy.service &lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo systemctl disable iio-sensor-proxy.service&lt;/p&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get remove iio-sensor-proxy &lt;/p&gt;&#xA;" OwnerUserId="18919" LastActivityDate="2020-03-29T04:42:54.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23889" PostTypeId="2" ParentId="8924" CreationDate="2020-03-29T04:47:39.983" Score="1" Body="&lt;p&gt;You can disable the rotation sensor with the following commands:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo systemctl stop iio-sensor-proxy.service&lt;/p&gt;&#xA;&lt;p&gt;sudo systemctl disable iio-sensor-proxy.service&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get remove iio-sensor-proxy&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18919" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-03-29T04:47:39.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23891" PostTypeId="2" ParentId="22872" CreationDate="2020-03-29T10:01:23.090" Score="0" Body="&lt;p&gt;Files does not currently support this feature. There is this PR &lt;code&gt;https://github.com/elementary/files/pull/1189&lt;/code&gt; to allow customising file icons but there is no guarantee when or if this will be accepted into master.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-03-29T10:01:23.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23892" PostTypeId="2" ParentId="22863" CreationDate="2020-03-29T10:17:22.353" Score="1" Body="&lt;p&gt;You can see what system keyboard shortcuts are set up on your system by looking in System Settings/Keyboard/Shortcuts. On my system &lt;code&gt;&amp;lt;Super&amp;gt;E&lt;/code&gt; launches a new Files window because I have a custom shortcut set up which runs &lt;code&gt;io.elementary.files -n ~&lt;/code&gt;.  Variable results from the same action suggests a race between two processes both responding to the same shortcut.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-03-29T10:17:22.353" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23893" PostTypeId="2" ParentId="22875" CreationDate="2020-03-29T11:58:34.590" Score="0" Body="&lt;p&gt;Depending on how you've originally installed eOS there's a good chance you can boot into a 'recovery mode' (via the Grub menu) which is normally accessed by holding down the &lt;code&gt;esc&lt;/code&gt; key immediately after turning your system on, or a restart process begins, and then only after any BIOS entry shortcut has timed out. If your system boots into the Grub menu you'll know it - minimal text based menu navigated by arrow keys with menu items labeled with the operating system the selection will boot into. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recovery mode (if it was installed) would then be under the main menu item labeled 'Advanced elementary os options'. Select that and it should give you a list of secondary boot options - one of which should have 'recovery' in its label.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After selecting a recovery boot option - another minimal looking menu eventually comes up. That one will have options centered around recovery specifics all of which are relatively safe to pick from. Can't say those would fix your login issue - but they're worth a try.&lt;/p&gt;&#xA;" OwnerUserId="13836" LastEditorUserId="13836" LastEditDate="2020-03-29T15:57:01.363" LastActivityDate="2020-03-29T15:57:01.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23894" PostTypeId="1" CreationDate="2020-03-29T13:44:42.580" Score="1" ViewCount="385" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ibGPj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ibGPj.png&quot; alt=&quot;AppCenter update&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I keep getting notifications from AppCenter saying there is 1 update available, but when I go into AppCenter there aren't actually any updates I can get. If I close AppCenter, I just get a notification again a few minutes later saying there is an update available.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried &lt;code&gt;sudo apt update&lt;/code&gt;, &lt;code&gt;sudo apt upgrade&lt;/code&gt;, &amp;amp; &lt;code&gt;sudo apt dist-upgrade&lt;/code&gt; from the terminal and none have made it stop or go away.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At one point there actually was an update available, so AppCenter notification said there were 2 updates available. After updating, it went back to saying 1 update available again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please help, this is getting very annoying.&lt;/p&gt;&#xA;" OwnerUserId="22187" LastActivityDate="2024-01-09T03:57:39.047" Title="AppCenter shows notifications for update, but none are available" Tags="|updates|release-hera|" AnswerCount="7" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23895" PostTypeId="2" ParentId="23894" CreationDate="2020-03-29T15:48:09.970" Score="0" Body="&lt;p&gt;Close AppCenter, open a terminal and try:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt --fix-broken install&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Let it work and now run&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;After this, sometimes you need to reboot for Appcenter to stop notifying (haven't tried log off/logon though)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Aldo&lt;/p&gt;&#xA;" OwnerUserId="17526" LastActivityDate="2020-03-29T15:48:09.970" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23900" PostTypeId="1" CreationDate="2020-03-30T04:31:41.143" Score="1" ViewCount="53" Body="&lt;p&gt;I want to disable middle touchpad button paste feature on my laptop. I have read about a change that implements this options now thanks to a fixing (&lt;a href=&quot;https://github.com/elementary/default-settings/issues/5&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/default-settings/issues/5&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, it doesnt work for me, I disabled the feature using the settings panel like the following image (last option):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/157xE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/157xE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it still does the paste. I have installed before gnome-tweaks that has the same option like the next image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FLK5T.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FLK5T.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have disabled options for middle click paste, and disable buttons emulation on touchad at all how you can see but the paste feature is still enabled (I have rebooted the system many times and trying with different options but nothing works)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then, I dont know what could be happen, why I cant disable this option?, what I was making wrong? I think this can be because the option is on pantheon's setting panel and gnome-tweaks too, but I dont know how it cuould be interfering.&lt;/p&gt;&#xA;" OwnerUserId="22194" LastActivityDate="2020-03-30T04:31:41.143" Title="How to disable touchpad middle button paste feature" Tags="|touchpad|pantheon|gnome|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23901" PostTypeId="1" CreationDate="2020-03-30T07:12:36.237" Score="0" ViewCount="45" Body="&lt;p&gt;since eOS 5.1 is fast as hell, I finally use it as my main OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But: when ever I mount my home server, I cannot manipulate files on its external HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Problem: all files on my NTFS-formatted HDD are owned by &quot;www-data&quot;, and have the group &quot;exthdrw&quot;, which I am member of. All files have permissions 460, so I can read/write files via my group membership.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But Pantheon Files ignores tgat. I cannot copy files onto the external server HDD.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It works in Caja (MATE) and Nautilus (GNOME).&lt;/p&gt;&#xA;" OwnerUserId="22196" LastEditorUserId="15904" LastEditDate="2020-04-09T23:24:52.530" LastActivityDate="2023-12-21T09:07:50.930" Title="Pantheon Files ignores higher group-permissions" Tags="|pantheon-files|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23902" PostTypeId="2" ParentId="23894" CreationDate="2020-03-30T10:02:05.983" Score="0" Body="&lt;p&gt;I had the same problem, but just went away by itself, check my thread.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/22840/appcenter-is-showing-non-existing-updates-badge-counter/22854#22854&quot;&gt;AppCenter is showing non-existing updates badge counter&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-03-30T10:02:05.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23904" PostTypeId="1" CreationDate="2020-03-30T12:17:59.040" Score="0" ViewCount="37" Body="&lt;p&gt;How can I turn off automatic dimming of screen when I am inactive? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was looking in settings but I coudn't find anythink.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="19187" LastActivityDate="2020-03-30T13:03:17.393" Title="Screen dimming when user inactive - how to turn off it?" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="23906" PostTypeId="1" AcceptedAnswerId="23908" CreationDate="2020-03-30T14:36:51.280" Score="0" ViewCount="267" Body="&lt;p&gt;New user here. I have seen similar questions here but none of the solutions in those questions fixed these problems.&#xA;When I open the app center, the &quot;Failed to fetch updates&quot; message pops up with the following details:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://packages.elementary.io/appcenter hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AOwMC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AOwMC.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also when I try to install any app the &quot;The package id's '' are not vaild&quot; message pops up&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rrluJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rrluJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22202" LastActivityDate="2020-04-29T17:11:01.140" Title="&quot;Failed to fetch updates&quot; popping up on app center and cannot install apps" Tags="|appcenter|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23908" PostTypeId="2" ParentId="23906" CreationDate="2020-03-30T16:50:05.393" Score="1" Body="&lt;p&gt;Replace &lt;code&gt;hera&lt;/code&gt; to &lt;code&gt;bionic&lt;/code&gt; in the next files:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/appcenter.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/patches.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/etc/apt/sources.list.d/elementary.list&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Use the following command to automate this process:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find /etc/apt -type f -print0 | sudo xargs -0 sed -i 's/hera/bionic/g'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-03-30T16:50:05.393" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="23911" PostTypeId="2" ParentId="23901" CreationDate="2020-03-30T22:21:35.220" Score="0" Body="&lt;p&gt;I'd do a chmod -R 775 on the entire directory. If that'd even work, I'm unsure. Theory suggests so though &lt;/p&gt;&#xA;&#xA;&lt;p&gt;ref: &lt;a href=&quot;https://linuxize.com/post/chmod-recursive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxize.com/post/chmod-recursive/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22206" LastActivityDate="2020-03-30T22:21:35.220" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="23914" PostTypeId="2" ParentId="22683" CreationDate="2020-03-31T06:20:38.490" Score="1" Body="&lt;p&gt;install Elementary SDK (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11507/unable-to-locate-elementary-sdk/22685#22685&quot;&gt;this fix&lt;/a&gt; may work if you run into errors in 5.1 hera):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;install a compiler:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install cmake&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;assuming you have git already set up, clone the repository you want to work on (eg. wingpanel-datetime-panel):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/elementary/wingpanel-indicator-datetime.git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;change into the directory and make whatever changes you want to make (eg. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10319/how-to-hide-date-in-elementary-top-bar&quot;&gt;How to hide date in elementary top bar?&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd wingpanel-indicator-datetime&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;read the README.md and install any dependencies not included with Elementary SDK (eg. libecal1.2-dev)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libecal1.2-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;use meson to create your build environment (use --prefix=/usr if you want your changes to apply to all users on this computer):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;meson build&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;fire off your build:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd build&#xA;ninja&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;deploy your changes:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;for a simple change to wingpanel in what is mocked above, it is sufficient to log out and log back in (no reboot needed)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;presto!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;if any of the above does not make sense, it is recommended you read the &lt;a href=&quot;https://elementary.io/docs/code/getting-started&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary Developer Guide&lt;/a&gt; as it starts from square one (including setting up Git)&lt;/p&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-03-31T06:26:43.367" LastActivityDate="2020-03-31T06:26:43.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23915" PostTypeId="2" ParentId="10319" CreationDate="2020-03-31T06:29:09.093" Score="0" Body="&lt;p&gt;clone the component:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/elementary/wingpanel-indicator-datetime.git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as of 5.1 (Hera), I followed @Egon Stetmann's lead and commented out in src/Widgets/PanelLabel.vala:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//        add (date_revealer);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;per @lemonslice's suggestion, follow these &lt;a href=&quot;https://elementaryos.stackexchange.com/a/23914/20912&quot;&gt;instructions to compile and install changes to Elementary&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;voila!  enjoy not having to stare at a date all day! :)&lt;/p&gt;&#xA;" OwnerUserId="20912" LastEditorUserId="20912" LastEditDate="2020-03-31T06:35:21.457" LastActivityDate="2020-03-31T06:35:21.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23917" PostTypeId="2" ParentId="2329" CreationDate="2020-03-31T10:20:43.727" Score="0" Body="&lt;p&gt;Inside the player along the title of the currently playing song, there are two icon on both sides.&#xA;The button on the left is shuffle and right is repeat.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Dihkp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Dihkp.jpg&quot; alt=&quot;How to shuffle the music in the default music player?&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22212" LastActivityDate="2020-03-31T10:20:43.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23919" PostTypeId="1" CreationDate="2020-03-31T15:26:09.610" Score="1" ViewCount="166" Body="&lt;p&gt;I am new to elementary OS. I am using VcXsrv to open some apps in Windows 10 1909 remotely using X11 Forwarding in Putty with elementary OS 5.1.2 Hera.  Most everything works perfectly.  However, I have a problem exporting gnome-system-monitor.  It opens with an ~ 2cm black border around the application.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried with and without &lt;em&gt;export &quot;LIBGL_ALWAYS_INDIRECT=1&quot;&lt;/em&gt; and it displays the same behavior.  I only have this problem with elementary OS.  I can't replicate it using Ubuntu LTS 18.04.  I have attached an image to show the problem better.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I realize that gnome-system-monitor is not a native application for elementary OS, but I was unable to find another app that was native and provided the visual functionality of gnome-system-monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I stuck with this border?  Is there a native elementary OS app that provides all the features of gnome-system-monitor?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you.&lt;a href=&quot;https://i.stack.imgur.com/pw2KT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pw2KT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22216" LastActivityDate="2020-03-31T15:26:09.610" Title="Black Border Around gnome-system-monitor in X11 on Windows 10" Tags="|xorg|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23920" PostTypeId="2" ParentId="22687" CreationDate="2020-03-31T16:51:28.147" Score="0" Body="&lt;p&gt;I can't really answer as I have no idea, but I wonder if what you want to accomplish can be done another way; For example adding the pantheon desktop to ubuntu or adding whatever desktop you are using in ubuntu to Elementary os.  Then you don't have to dual boot and you can use all the same folder layout.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-03-31T16:51:28.147" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="23922" PostTypeId="2" ParentId="22647" CreationDate="2020-03-31T21:10:09.370" Score="1" Body="&lt;p&gt;после обновления на 5.3.0-45 всё заработало))))) ура!&lt;/p&gt;&#xA;" OwnerUserId="20890" LastActivityDate="2020-03-31T21:10:09.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23923" PostTypeId="2" ParentId="5221" CreationDate="2020-03-31T21:29:30.503" Score="0" Body="&lt;p&gt;if you feel like getting dirty with code, you can remove it yourself as it's actually pretty straightforward (it only took me 25 min because I didn't realize we can &lt;a href=&quot;https://github.com/elementary/wingpanel/pull/93#issuecomment-561520718&quot; rel=&quot;nofollow noreferrer&quot;&gt;ignore a libmutter dependency message&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;assuming you have git setup, clone the greeter component:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/elementary/greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;as of 5.1 (Hera), comment out in src/Widgets/DataTimeWidget.vala:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;//        add (time_label);&#xA;//        add (date_label);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;follow these &lt;a href=&quot;https://elementaryos.stackexchange.com/a/23914/20912&quot;&gt;instructions to compile and install changes to Elementary&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;now your flow is no longer interrupted by time staring you in the face :)&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-03-31T21:29:30.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23925" PostTypeId="2" ParentId="13369" CreationDate="2020-04-01T05:39:18.323" Score="0" Body="&lt;p&gt;Just quick addition, after executing &lt;code&gt;synclient TapButton3=0&lt;/code&gt; and disabling 'Middle Click Paste' I also had to restart all my applications to make them stop pasting on three-finger tap.&lt;/p&gt;&#xA;" OwnerUserId="22222" LastActivityDate="2020-04-01T05:39:18.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23926" PostTypeId="2" ParentId="17113" CreationDate="2020-04-01T11:29:59.623" Score="3" Body="&lt;p&gt;Found solution that works in the terminal app:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings -&gt; Mouse &amp;amp; Touchpad -&gt; Clicking -&gt; Middle click paste&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-mouse-touchpad/issues/47&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-mouse-touchpad/issues/47&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22226" LastActivityDate="2020-04-01T11:29:59.623" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23929" PostTypeId="1" CreationDate="2020-04-01T15:41:25.903" Score="0" ViewCount="73" Body="&lt;p&gt;I'm trying to change my profile photo in Hera, but I don't see my own account under &quot;User Account Settings&quot;:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/90M1W.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/90M1W.png&quot; alt=&quot;User Account window not showing my current account.&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I get my account to show and thus change my personal details?&lt;/p&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2023-12-14T00:05:10.660" Title="How do I choose a photo for my user account in Hera?" Tags="|release-hera|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23930" PostTypeId="1" CreationDate="2020-04-01T15:50:19.663" Score="0" ViewCount="146" Body="&lt;p&gt;After I installed elementary os Bluetooth stopped appering as an option in my laptop.&lt;/p&gt;&#xA;" OwnerUserId="22231" LastActivityDate="2024-01-08T15:05:45.667" Title="Bluetooth not working and not showing up in settings" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23931" PostTypeId="2" ParentId="22617" CreationDate="2020-04-01T16:20:17.990" Score="0" Body="&lt;p&gt;As you'll find in the linked Github issue - likely one of the schema settings is interfering with settings for elementary's code app. Since Code is unable to find it's settings it's crashing; it can be fixed if &lt;code&gt;XDG_DATA_DIR&lt;/code&gt; is set to a value so that Code gets correct settings. In my case I, initially, had to add following in my terminal's shell startup script (e.g. .zshrc for zsh or .bashrc for bash) -&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ export XDG_DATA_DIRS=&quot;/usr/share:$XDG_DATA_DIRS&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but on further reading it I found out that in order to launch it from the dock, I'd need to put it inside &lt;code&gt;~/.xsessionrc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ echo export 'XDG_DATA_DIRS=&quot;/usr/share:$XDG_DATA_DIRS&quot;' &amp;gt;&amp;gt; ~/.xsessionrc&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just make sure if something goes awry, you should be able to revert the changes to &lt;code&gt;xsessionrc&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8574" LastActivityDate="2020-04-01T16:20:17.990" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23933" PostTypeId="2" ParentId="1441" CreationDate="2020-04-02T08:25:06.390" Score="2" Body="&lt;p&gt;Concerning &quot;switch between windows of the same application on the same workspace&quot;.&#xA;All the answers say in effect &quot;There is no such keyboard shortcut&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But maybe something changed. I found this in ubuntu documentation:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C2e9W.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C2e9W.png&quot; alt=&quot;Screenshot from ubuntu documentation&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Link: &lt;a href=&quot;https://help.ubuntu.com/stable/ubuntu-help/shell-keyboard-shortcuts.html.en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/stable/ubuntu-help/shell-keyboard-shortcuts.html.en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22240" LastActivityDate="2020-04-02T08:25:06.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23934" PostTypeId="1" CreationDate="2020-04-02T14:49:29.153" Score="1" ViewCount="56" Body="&lt;p&gt;After a recent update, i am no longer able to connect to a pair of bluetooth headphones. This is both from the GUI applet and CLI using &lt;code&gt;bluetoothctl&lt;/code&gt;. I have removed the device and tried to repair to no avail. after some digging i noticed i also no longer have &lt;code&gt;pavucontrol&lt;/code&gt; installed anymore, and i need to reinstall &lt;code&gt;pulseaudio-module-bluetooth&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I try re-installing &lt;code&gt;pulseaudio-module-bluetooth&lt;/code&gt; and i get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;   Building dependency tree       &#xA;   Reading state information... Done&#xA;   Some packages could not be installed. This may mean that you have&#xA;   requested an impossible situation or if you are using the unstable&#xA;   distribution that some required packages have not yet been created&#xA;   or been moved out of Incoming.&#xA;   The following information may help to resolve the situation:&#xA;&#xA;   The following packages have unmet dependencies:&#xA;    pulseaudio-module-bluetooth : Depends: libpulse0 (= 1:11.1-1ubuntu7.4) but 1:11.1-1ubuntu7.5 is to be installed&#xA;                                  Depends: pulseaudio (= 1:11.1-1ubuntu7.4)&#xA;&#xA;   E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So, i should just try to downgrade &lt;code&gt;libpulse0&lt;/code&gt; right?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Well, when i try to do &lt;code&gt;sudo apt install libpulse0=1:11.1-1ubuntu7.4&lt;/code&gt; i get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages will be REMOVED:&#xA;   blueman elementary-desktop gala gnome-settings-daemon libcanberra-pulse libpulse-mainloop&#xA;glib0 libpulsedsp pantheon-shell&#xA;  pantheon-xsession-settings pulseaudio pulseaudio-utils switchboard-plug-notifications switchboard-plug-pantheon-shell&#xA;  switchboard-plug-sound wingpanel-indicator-sound&#xA;&#xA;The following packages will be DOWNGRADED:&#xA;  libpulse0&#xA;&#xA;0 upgraded, 0 newly installed, 1 downgraded, 15 to remove and 3 not upgraded.&#xA;Need to get 265 kB of archives.&#xA;After this operation, 16.0 MB disk space will be freed.&#xA;Do you want to continue? [Y/n]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I should &lt;strong&gt;NOT&lt;/strong&gt; do this right? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;But how can i get my bluetooth headphones connected again?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How did this happen?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does this have anything to do with pipewire?&lt;/p&gt;&#xA;" OwnerUserId="22238" LastActivityDate="2020-04-02T14:49:29.153" Title="Bluetooth no longer connecting to device after update" Tags="|bluetooth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23935" PostTypeId="2" ParentId="21030" CreationDate="2020-04-02T15:13:47.447" Score="0" Body="&lt;p&gt;Bo rislav is correct.  This computer has a 32 bit architecture, so no go for Elementary OS.  Given that, and slowness of the computer in general, I would look toward a super lightweight distro like LXLE.  It has a 32 bit version and a nice desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As for the wi-fi (Broadcom?)  I am not sure of the current status, but they took a little fiddling in the past, but could be setup.  I would follow Bo rislav's recommendation and boot from a live key.  See if the Wifi works.  If not, I am sure an internet search might provide some solution.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-04-02T15:13:47.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23937" PostTypeId="2" ParentId="23929" CreationDate="2020-04-02T17:37:40.050" Score="0" Body="&lt;p&gt;I think you can't change the profile photo of guest account.&lt;/p&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-04-02T17:37:40.050" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="23939" PostTypeId="2" ParentId="22706" CreationDate="2020-04-02T19:05:44.477" Score="0" Body="&lt;p&gt;I just realized that my default File Browser, under System Settings -&gt; Applications, was set to Terminal. I don't remember changing this setting, but changing it back to Elementary's 'Files' definitely fixed my problem. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I am embarrassed.&lt;/p&gt;&#xA;" OwnerUserId="20541" LastActivityDate="2020-04-02T19:05:44.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23945" PostTypeId="1" CreationDate="2020-04-03T10:57:44.520" Score="0" ViewCount="118" Body="&lt;p&gt;I have a problem with Discord and TeamSpeak 3 clients on elementary OS 5.1.2 Hera. After a few hours of using either, the client just closes, no error message, nothing. On TS3 when I connect back to the server, my previous connection is still visible, but it times out after a minute. At first I thought that Linux port of Discord just does that, because it is pretty buggy and freezes a lot, but I was surprised to see that TS3 does the same, despite being the &quot;stable and reliable one&quot;. So maybe elementary OS has a problem with voice chat apps? Has anyone else experienced the same issue? Any ideas how to fix it? Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Today TeamSpeak3 just froze and I had to kill it.My friends, who are all on Windows, had 0 issues with TS3 so I guess the problem is with elementary...&lt;/p&gt;&#xA;" OwnerUserId="22258" LastEditorUserId="22258" LastEditDate="2020-04-04T23:35:19.720" LastActivityDate="2023-12-24T05:07:46.020" Title="Discord and TeamSpeak 3 clients randomly closing" Tags="|release-hera|games|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23946" PostTypeId="2" ParentId="21972" CreationDate="2020-04-03T12:19:02.807" Score="0" Body="&lt;p&gt;I installed the version from Synaptic (3.08) and it is okay.  I have in my notes to not install the one from Appcenter but I believe that was an issue unrelated to the OP's issue.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-04-03T12:19:02.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23947" PostTypeId="1" CreationDate="2020-04-03T13:09:58.167" Score="1" ViewCount="77" Body="&lt;p&gt;I've seen threads about long startup when booting Elementary OS or that its completely stuck when rebooting, but my problem is that it very often (not always) takes 90 sec. before the logo dissapears and the reboot starts. My question is what causes this erratic behaviour and how to solve it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Made about 10 reboots (rebooting, shut downs) and it seems that in 75% of the cases it takes about 90 sec. before the reboot begins (before the logo dissapears). In 25% of the cases it reboots immediately.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to shut down every open applications (for instance webbrowsers with a lot of tabs) before rebooting/shut down without success&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Using dual boot (Windows 10 and Elementary OS) and Grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cincerely&lt;/p&gt;&#xA;" OwnerUserId="22259" LastActivityDate="2020-04-03T13:40:08.253" Title="long reboot Elementary OS" Tags="|boot|shutdown|" AnswerCount="1" CommentCount="0" ClosedDate="2020-04-09T23:25:56.053" ContentLicense="CC BY-SA 4.0" />
  <row Id="23948" PostTypeId="2" ParentId="23947" CreationDate="2020-04-03T13:40:08.253" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18947/slow-shutdown-and-cannot-troubleshoot&quot;&gt;Slow shutdown and cannot troubleshoot&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically this is a common bug that can be resolved by reducing the default timeout.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hint is that it is exactly 90 seconds.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-04-03T13:40:08.253" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23949" PostTypeId="1" CreationDate="2020-04-03T14:57:48.820" Score="0" ViewCount="30" Body="&lt;p&gt;Wireless has been cut after every few minutes. The interruption affects not only the internet connection but also the wireless connection to the printer. &#xA;I used lspci to discover my wireless info, and after I went ahead and typed:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;~$ lspci -vv -s 02:00.0&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's the output I got:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xGe4t.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xGe4t.jpg&quot; alt=&quot;screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So... What's that part about Interruption routed to IRQ about? And why is access denied in the capabilities? And how can I solve the problem of getting my connection interrupted every few minutes?&#xA;Thanks for any help you can provide.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt; The output I copy and pasted from the terminal earlier wasn't very readable and some parts were missing, so now I pasted a screenshot of the output instead.&lt;/p&gt;&#xA;" OwnerUserId="22262" LastEditorUserId="-1" LastEditDate="2020-04-04T18:04:38.090" LastActivityDate="2024-03-15T11:05:40.750" Title="Need help interpreting the info on my Wireless card to eliminate the interruptions" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23950" PostTypeId="2" ParentId="23949" CreationDate="2020-04-03T15:29:34.633" Score="0" Body="&lt;p&gt;Write this command to terminal:&#xA;sudo systemd-analyze blame&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And you can see the init time of system units.&lt;/p&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-04-03T15:29:34.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23951" PostTypeId="1" AcceptedAnswerId="23956" CreationDate="2020-04-03T17:20:08.907" Score="0" ViewCount="655" Body="&lt;p&gt;I have a GTX-1060 3gb graphics card and installed the nvidia-440 drivers through the terminal. After updating elementary the resolution became smaller and I could not change it back to 1920x1080. I checked the nvidia x server settings but the application was completely blank. The default nouveau video driver gives me 1080p but I need to use the nvidia drivers. I blacklisted the nouveau drivers because they were causing crashes. I have tried uninstalling the nvidia drivers and then reinstalling. I have checked the additional drivers application and it said I was using the 440 drivers. What can I do to set my monitor to 1080p?&lt;/p&gt;&#xA;" OwnerUserId="22265" LastActivityDate="2020-04-03T22:28:37.703" Title="How Can I Fix My Resolution After Installing Nvidia Drivers?" Tags="|nvidia|resolution|nvidia-driver|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23955" PostTypeId="2" ParentId="23945" CreationDate="2020-04-03T20:41:12.763" Score="0" Body="&lt;p&gt;Did you get them from flatpak? I've experienced problems with Discord when getting it from flatpak before. I usually just get the .deb file from Discord site. I've yet to had a problem doing it like that. Not sure about teamspeak though, sorry. &lt;/p&gt;&#xA;" OwnerUserId="22270" LastActivityDate="2020-04-03T20:41:12.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23956" PostTypeId="2" ParentId="23951" CreationDate="2020-04-03T22:28:37.703" Score="0" Body="&lt;p&gt;What I recommend you is to use the proprietary nvidia drivers. The best way to do it is in recovery mode with network enabled or into tty console screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;a. The first option &lt;strong&gt;recovery mode&lt;/strong&gt; can be entered by choosing &lt;strong&gt;advanced options for elementary os&lt;/strong&gt; from grub menu, then on the next screen the top option with [recovery] in its name. When it boots, from the menu there fisrt select &lt;strong&gt;enable network&lt;/strong&gt; and then go to the &lt;strong&gt;root shell&lt;/strong&gt;. Execute first &lt;code&gt;apt update&lt;/code&gt; and if there are no connection errors, you can proceed with the numbered instructions below. You can omit &lt;code&gt;sudo&lt;/code&gt; in the lines in recovery mode, because you are using the root shell. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;b. You can access the &lt;strong&gt;tty screen&lt;/strong&gt; once you are into pantheon greeter, but instead of typing your username/password into the boxes there you have to press &lt;kbd&gt;ctr&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;f1&lt;/kbd&gt; (f1 - f6 will work) and then login into console mode.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Continue with the below commands &lt;strong&gt;only&lt;/strong&gt; if you have working network - the easiest way to check this is by &lt;code&gt;sudo apt update&lt;/code&gt; - if you have no network errors, you can continue.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;1. remove all nvidia drivers previously installed&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;if you do not have the &lt;code&gt;purge&lt;/code&gt; command you can install it by &lt;code&gt;sudo apt install purge&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;2. Add the graphics-drivers team repository&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Confirm adding it and the system should automaticaly execute &lt;code&gt;apt update&lt;/code&gt;, if not - you have to execute it by typing &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h1&gt;3. (optional) view a list of all drivers with the recommended one&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers devices&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;h1&gt;4.install automatically the recommended version&lt;/h1&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can add comments if you have problems with this, and if it works for you, please accept this answer.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-04-03T22:28:37.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23958" PostTypeId="2" ParentId="23945" CreationDate="2020-04-04T04:35:23.187" Score="0" Body="&lt;p&gt;I've had this happen with Discord a few times, using 5.1.2. I haven't found a solution, but wanted to chime in to say you're not alone. &lt;/p&gt;&#xA;" OwnerUserId="15536" LastActivityDate="2020-04-04T04:35:23.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23959" PostTypeId="1" CreationDate="2020-04-04T07:55:20.397" Score="0" ViewCount="825" Body="&lt;p&gt;I've Searched many websites and blogs regarding this issue and none are successful so far so i thought i could post my question in the forums.I've tried installing repositories and stuff many things i saw on the internet and they all ended up nowhere please help me with this.How can I get Dark Mode on Files application on elementary OS ?!&lt;/p&gt;&#xA;" OwnerUserId="19332" LastActivityDate="2020-05-15T21:04:20.430" Title="how to get dark mode in files in elementary OS?" Tags="|settings|pantheon-files|pantheon|files|tweak-tool|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23963" PostTypeId="2" ParentId="601" CreationDate="2020-04-04T14:57:13.867" Score="0" Body="&lt;p&gt;In the last version of ElementaryOS 5.1:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings follow-last-tab true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13306" LastActivityDate="2020-04-04T14:57:13.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23964" PostTypeId="1" CreationDate="2020-04-04T15:38:16.030" Score="1" ViewCount="1061" Body="&lt;p&gt;I don't know if this is the right place to open this discussion, but I have a problem that I can't solve.&lt;/p&gt;&#xA;&lt;p&gt;I installed elementary OS on a MacBook Core 2 Duo (A1181), in dual boot with OS X Lion. I had no problems except the failure of the integrated webcam. I searched the net for guides to solve the problem. Almost all of them lead me to extract the driver from OS X:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://help.ubuntu.com/community/MactelSupportTeam/AppleiSight&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/MactelSupportTeam/AppleiSight&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://turanct.wordpress.com/tag/appleusbvideosupport/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://turanct.wordpress.com/tag/appleusbvideosupport/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=m97YJ-Qfdi8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=m97YJ-Qfdi8&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I was able to find and save the &lt;code&gt;AppleUSBVideoSupport&lt;/code&gt; file of the webcam, but the conversion operation to get the &lt;code&gt;Isight.fw&lt;/code&gt; file for linux is not successful.&lt;/p&gt;&#xA;&lt;p&gt;Does someone have the &lt;code&gt;Isight.fw&lt;/code&gt; file already extracted and/or do you know where it can be found?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="22285" LastEditorUserId="24889" LastEditDate="2021-02-10T23:10:31.120" LastActivityDate="2023-03-03T09:04:20.503" Title="iSight webcam doesn’t work on MacBook Core 2 Duo" Tags="|drivers|webcam|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23965" PostTypeId="1" AcceptedAnswerId="24253" CreationDate="2020-04-04T17:35:30.113" Score="0" ViewCount="323" Body="&lt;p&gt;Sorry to bring &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12399/no-sound-setting-in-system-settings/22855?noredirect=1#comment24381_22855&quot;&gt;this&lt;/a&gt; up after ~3 years, but I'm stuck on the suggested solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a similar issue, but when I'm running this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-gcc-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I get this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA; switchboard-plug-gcc-sound : Depends: unity-control-center but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The above iterates for all the &quot;unmet dependencies&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any clue about what I might be missing here, would be much appreciated!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="21143" LastActivityDate="2020-04-24T21:02:13.137" Title="switchboard-plug-gcc-sound - &quot;unmet dependencies&quot;" Tags="|settings|sound|dependencies|switchboard|package|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="23966" PostTypeId="1" AcceptedAnswerId="25588" CreationDate="2020-04-04T18:22:23.717" Score="2" ViewCount="89" Body="&lt;p&gt;I don't see any options for selecting Dvorak layout in US English (or any other languages).  How do I change to dvorak keyboard layout?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Distributor ID: elementary&#xA;Description:    elementary OS 5.1 Hera&#xA;Release:    5.1&#xA;Codename:   hera&lt;/p&gt;&#xA;" OwnerUserId="22287" LastEditorUserId="15904" LastEditDate="2020-04-05T16:27:47.143" LastActivityDate="2020-09-01T12:15:56.390" Title="How To Select Dvorak Layout" Tags="|release-hera|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23967" PostTypeId="1" CreationDate="2020-04-04T19:12:13.840" Score="0" ViewCount="171" Body="&lt;p&gt;Unfortunately, Tor Browser's installation process is quite convoluted and seems to skip some of the traditional amenities of a browser, (including being recognized by System Settings as a browser). In order to install the browser, I downloaded the latest Linux version of Tor Browser from the Tor Project website, and ran the following commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ tar xvf tor-browser-linux64-9.0.7_en-US.tar.xz&#xA;$ mv tor-browser_en-US/* ~/.local/share/applications/.&#xA;$ /usr/share/applications/start-tor-browser.desktop --register-app&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This worked to register Tor Browser with the elementaryOS application launcher. However, Tor Browser did not show up in the &lt;code&gt;System Settings &amp;gt; Applications &amp;gt; Default &amp;gt; Web Browser&lt;/code&gt; dropdown; only the other browsers I had installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At first I tried &lt;code&gt;update-alternatives&lt;/code&gt;. I tried setting &lt;code&gt;x-www-browser&lt;/code&gt; and &lt;code&gt;gnome-www-browser&lt;/code&gt; with the commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --install /usr/bin/x-www-browser x-www-browser ~/.local/share/applications/start-tor-browser.desktop 1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --install /usr/bin/gnome-www-browser gnome-www-browser ~/.local/share/applications/start-tor-browser.desktop 1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;please note that this &lt;code&gt;.desktop&lt;/code&gt; file is also the executable for the browser.&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Neither of these worked. Next, I tried using &lt;code&gt;gsettings&lt;/code&gt;, but tab completion on &lt;code&gt;org.gnome.desktop.default-applications.&lt;/code&gt; with the command &lt;code&gt;gsettings get&lt;/code&gt; showed only the following options:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;org.gnome.desktop.default-applications.office&#xA;org.gnome.desktop.default-applications.office.calendar&#xA;org.gnome.desktop.default-applications.office.tasks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;which, given that it doesn't have the full list of application types elementaryOS supports in System Settings, I assume is an incomplete list unused by the main OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;How do I set Tor Browser as the default browser for elementaryOS?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user22289" LastActivityDate="2020-06-01T08:04:46.430" Title="How do I set Tor Browser as the default browser for elementaryOS?" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23968" PostTypeId="1" CreationDate="2020-04-04T19:22:34.127" Score="0" ViewCount="167" Body="&lt;p&gt;I can't get wifi to work...I can't even see the wifi icon, I can only log in with cable. I installed windows wireless drivers and wifi radar...I also reinstalled the elementaryke OS... also my keyboard is not responsive when trying to write au comment in YouTube&#xA;I have a HP laptop 15-bw0xx&lt;/p&gt;&#xA;" OwnerUserId="22290" LastEditorUserId="15904" LastEditDate="2020-04-09T23:24:36.857" LastActivityDate="2023-12-27T07:03:25.403" Title="Wifi not recognize in elementary OS 5.1.3 Hera" Tags="|wifi|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23970" PostTypeId="1" CreationDate="2020-04-05T02:44:54.750" Score="0" ViewCount="91" Body="&lt;p&gt;EOS Hera on Mac Pro 1,1, mostly everthing works except it doesn't save monitor settings and is quite slow compare to Mac OS and Puppy/Linux(which I am posting from)&lt;/p&gt;&#xA;" OwnerUserId="22293" LastActivityDate="2023-12-18T11:09:06.083" Title="Elementary Hera is slow on older Mac, Puppy 8.0 is fast as is Mac OS. Is there something I can do (that is not too technical)?" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23971" PostTypeId="2" ParentId="11161" CreationDate="2020-04-05T03:34:24.850" Score="0" Body="&lt;p&gt;I've wireless keyboard (and mouse) both logitech. Keyboard K750 and MX mouse. They work like they should :)&#xA;There's also an indicator that show batteries on them.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/crMV9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/crMV9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-04-05T03:34:24.850" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23972" PostTypeId="1" CreationDate="2020-04-05T05:57:11.040" Score="1" ViewCount="208" Body="&lt;p&gt;I have a legacy gtk.css that was working fine on Ubuntu Xenial, I've just upgraded to Bionic (2018) and the same code now is not working anymore:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ cat .config/gtk-3.0/gtk.css &#xA;.window-frame {&#xA;  box-shadow: none;&#xA;  margin: 0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this code was needed to remove an ugly black border from windows as explained here &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14548/remove-black-margin-from-elementaryos-applications-when-using-awesome-window-man&quot;&gt;Remove black margin from elementaryOS applications when using Awesome Window Manager&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried the selector &lt;code&gt;.frame&amp;gt;border&lt;/code&gt; in the debugger &lt;code&gt;$ GTK_DEBUG=interactive io.elementary.calculator&lt;/code&gt; but to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone that follows GTK devel and knows how to update the CSS code? I tried to look into the official docs but couldn't find anything related to .window-frame having changed.&lt;/p&gt;&#xA;" OwnerUserId="13043" LastActivityDate="2021-05-05T22:07:55.747" Title="GTK 3.22 migration of older gtk.css -&gt; Black Margin on elementaryOS apps" Tags="|gtk|xorg|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23973" PostTypeId="1" CreationDate="2020-04-05T07:11:03.860" Score="1" ViewCount="795" Body="&lt;p&gt;I have just installed elementary OS Hera 5.1 on my 2011 Macbook Pro. I have noticed that my screen now has a yellowish tinge to it. It goes back to normal after a while so at first I thought it might be ageing hardware but after a quick look online I see that a few other people have experienced a similar problem albeit on different distros. This is my first time using linux (also my first time posting) so I apologise if the solution is a simple one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help &lt;/p&gt;&#xA;" OwnerUserId="22297" LastActivityDate="2023-12-18T20:02:35.320" Title="Yellow tinge to screen after installing elementary OS" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23974" PostTypeId="2" ParentId="23959" CreationDate="2020-04-05T09:30:29.183" Score="0" Body="&lt;p&gt;At the moment, Files does not have a &quot;prefer-dark-style&quot; setting unlike Code and Terminal.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can run it in dark mode by launching from the command line with &lt;code&gt;GTK_THEME=elementary:dark io.elementary.files&lt;/code&gt; but this will not work when launching from the dock or Applications menu.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Unfortunately, linking the above command to a custom keyboard shortcut using Settings/Keyboard/Shortcuts/Custom does not work either for some reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that Files is not currently dark-theme aware so some aspects of the appearance may not be ideal.&#xA;`&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="3911" LastEditDate="2020-04-05T09:38:26.363" LastActivityDate="2020-04-05T09:38:26.363" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23981" PostTypeId="2" ParentId="13969" CreationDate="2020-04-06T06:17:41.990" Score="0" Body="&lt;p&gt;This also fixed VMware Horizon viewer 5.03 under Elementary OS Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Exec=env GTK_CSD=0 /usr/bin/vmware-view %u&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22313" LastActivityDate="2020-04-06T06:17:41.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23982" PostTypeId="1" CreationDate="2020-04-06T06:28:30.837" Score="0" ViewCount="130" Body="&lt;p&gt;When I try to connect a monitor to the laptop it either shows a black screen or a poor quality image. By poor quality I mean discoloration and some static  at the outer left and right sides. The black screen appears when I try to drag some window to the monitor.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked the monitor using another laptop. It works just fine. I also checked the laptop, connecting it to a TV, everything also worked fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thought it might be because of the drivers, but intel support tells me my drivers are up to date. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The was also some recommendation to go to intel graphics and change quantization rate to full, which I did. It didn't help.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Amusingly when I connect the TV to the second laptop it shows the same poor quality image(but without the black screen).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use the same hdmi cable for every case.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop laptop is an acer aspire v 13 with intel hd 520.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The monitor is also an acer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both have 1920 by 1080 definition if it matters.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second monitor is an HP with a intel hd 620 and definition of 1366 by 768.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Even when the monitor shows black screen the laptop still sees it.&#xA;Both have windows 10 installed.&lt;/p&gt;&#xA;" OwnerUserId="22312" LastActivityDate="2024-01-27T19:08:26.110" Title="Second monitor shows black screen or poor quality image" Tags="|graphic-drivers|microsoft-windows|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23983" PostTypeId="1" CreationDate="2020-04-06T08:21:27.527" Score="-1" ViewCount="45" Body="&lt;p&gt;This looks like I'm being prompted for a file NAME. Instead I get a window showing file system STRUCTURE.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know it's simple. Should have a simple answer. For instance I need to export a file. I get a window showing subdirectories structure but no input window. And, worst of all, no universal help screen to prompt me. Or at least nothing I easily see.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can someone try this and tell me what I missed ?&lt;/p&gt;&#xA;" OwnerUserId="21116" LastActivityDate="2021-08-29T13:01:05.083" Title="What do I do here?" Tags="|user-interface|app-shortcuts|input|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="23984" PostTypeId="2" ParentId="23983" CreationDate="2020-04-06T10:03:00.073" Score="0" Body="&lt;p&gt;Are there filename field in left bottom corner?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Look at this: &lt;a href=&quot;https://4.bp.blogspot.com/-rCFcnJdcem0/XiVGvEss0WI/AAAAAAAAZxc/mGDt9qNUitUn2AHrs5Zhap_8Mon17D1IQCK4BGAYYCw/s1600/save-open.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://4.bp.blogspot.com/-rCFcnJdcem0/XiVGvEss0WI/AAAAAAAAZxc/mGDt9qNUitUn2AHrs5Zhap_8Mon17D1IQCK4BGAYYCw/s1600/save-open.png&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-04-06T10:03:00.073" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="23989" PostTypeId="1" CreationDate="2020-04-06T15:27:50.000" Score="0" ViewCount="101" Body="&lt;p&gt;I'm trying to setup my display at 2560x1440 @60Hz. I can use xrandr and it all works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've created a script in /usr/local/bin to do this on startup but cannot get it to run prior to login screen prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried creating a lightdm.conf file and added &lt;/p&gt;&#xA;&#xA;&lt;p&gt;display-setup-script=/usr/local/bin/displaysetup.sh&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but no luck. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone able to help with this?&lt;/p&gt;&#xA;" OwnerUserId="22320" LastActivityDate="2020-05-01T10:15:46.317" Title="Display resolution setup" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23992" PostTypeId="2" ParentId="23972" CreationDate="2020-04-06T19:42:06.540" Score="0" Body="&lt;p&gt;It seems that &lt;code&gt;.window-frame&lt;/code&gt; got changed in GTK CSS 3.22 from 3.18. For the sake of Google I coulnd't find into what got changed (someone mentioned &lt;code&gt;frame&lt;/code&gt; but that doesn't work).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So I got a brutal patch that seems to kind of work and have few side effects:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;* {&#xA;   box-shadow: none;&#xA;   margin: 0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gzd2a.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gzd2a.jpg&quot; alt=&quot;GTK3.22 remove black border&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hope this helps others while a proper solution is discovered.&lt;/p&gt;&#xA;" OwnerUserId="13043" LastActivityDate="2020-04-06T19:42:06.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23994" PostTypeId="2" ParentId="23970" CreationDate="2020-04-07T00:03:13.327" Score="0" Body="&lt;p&gt;You can install other desktop environment (e.g. JWM, IceWM, or Fluxbox).&#xA;Doing so allows you to choose your session before you login by pressing gear icon next to the password text field.&lt;a href=&quot;https://i.stack.imgur.com/BBGAH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BBGAH.png&quot; alt=&quot;DE selection at logon&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried with fluxbox and this works great so far with about 250Mb memory consumption when idle.&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2020-04-07T00:03:13.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23995" PostTypeId="1" AcceptedAnswerId="24014" CreationDate="2020-04-07T03:45:36.100" Score="0" ViewCount="25" Body="&lt;p&gt;I think this is a bug, or at least, UI inconsistency. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My privacy mode is on, meaning that history is disabled. If so, why does &quot;Recent&quot; still showing on Files sidebar? There's no purpose for it any more.&lt;/p&gt;&#xA;" OwnerUserId="21122" LastActivityDate="2020-04-08T08:03:57.603" Title="Recent entry still showing on Files sidebar even with History disabled. Bug?" Tags="|pantheon-files|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="23998" PostTypeId="2" ParentId="23973" CreationDate="2020-04-07T08:42:51.243" Score="0" Body="&lt;p&gt;Elementary has a &lt;em&gt;night light&lt;/em&gt; feature which removes a lot of blue light from the display, outside the hours of daylight. This can be customised or disabled completely. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Go to the &lt;strong&gt;Applications&lt;/strong&gt; section, and find the &lt;strong&gt;System Settings&lt;/strong&gt; tool. Within Systems Settings, choose &lt;strong&gt;Displays&lt;/strong&gt;. Click the &lt;strong&gt;Night Light&lt;/strong&gt; section and you are presented with an option to turn off this feature if required.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/W4ZfY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/W4ZfY.png&quot; alt=&quot;night light settings on elementary&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="280" LastActivityDate="2020-04-07T08:42:51.243" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="23999" PostTypeId="1" CreationDate="2020-04-07T09:31:23.910" Score="1" ViewCount="442" Body="&lt;p&gt;For many years, performing a middle click on a dock item (e.g. Terminal, Files), will open a new instance of the application e.g. if you want two terminal windows open to view side by side. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Recently, this is no longer working and a pinwheel spins for a while and then no action occurs. &#xA;The only workaround so far is to right click on the icon and choose &quot;New Window&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I restore this necessary functionality?&lt;/p&gt;&#xA;" OwnerUserId="280" LastActivityDate="2020-06-14T05:47:00.393" Title="Middle clicking an icon on the plank dock no longer opens a new window" Tags="|plank|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24001" PostTypeId="1" CreationDate="2020-04-07T11:11:13.343" Score="0" ViewCount="49" Body="&lt;p&gt;Can we get a few more Updates?&#xA;Not a day goes by that I don't have spend Data downloading Updates.....&#xA;I'm not lucky enough to have an &quot;unlimited&quot; data IPS, mine is capped and this OS keeps eating up large chunks of it.&#xA;How about an option with a checkbox to NOT update something?&lt;/p&gt;&#xA;" OwnerUserId="22336" LastActivityDate="2020-05-09T23:01:50.163" Title="Updates....constant why?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24002" PostTypeId="2" ParentId="2059" CreationDate="2020-04-07T11:35:56.790" Score="2" Body="&lt;p&gt;The 5.5.0 release of Terminal (4th Jan 2020) added the option to toggle Natural Copy/Paste in the Settings menu: &lt;a href=&quot;https://github.com/elementary/terminal/releases/tag/5.5.0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal/releases/tag/5.5.0&lt;/a&gt;&#xA;So now you can change this via the UI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was also mentioned in Elementary's blog: &lt;a href=&quot;https://blog.elementary.io/hera-updates-for-january-2020/#terminal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.elementary.io/hera-updates-for-january-2020/#terminal&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22337" LastActivityDate="2020-04-07T11:35:56.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24007" PostTypeId="1" CreationDate="2020-04-07T16:06:04.777" Score="0" ViewCount="184" Body="&lt;p&gt;I set up my IMAP account and everything looks like it worked. However nothing will appear in the right two columns, even though my message count appears like the app is grabbing the correct number. Is this is known issue with Mail?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XWMiq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XWMiq.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15297" LastActivityDate="2024-01-15T07:00:50.077" Title="Mail app won't show messages" Tags="|release-hera|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24008" PostTypeId="1" AcceptedAnswerId="24009" CreationDate="2020-04-07T17:05:23.877" Score="0" ViewCount="410" Body="&lt;p&gt;the sound of the system is low compared to other operating systems, I checked in settings and the audio is 100%, can someone help me, thanks!&lt;/p&gt;&#xA;" OwnerUserId="19633" LastEditorUserId="15904" LastEditDate="2020-04-09T23:24:40.273" LastActivityDate="2020-04-09T23:24:40.273" Title="Low Audio Volume Elementary OS 5.1.3 Hera" Tags="|release-hera|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24009" PostTypeId="2" ParentId="24008" CreationDate="2020-04-07T17:16:54.650" Score="0" Body="&lt;p&gt;Try set the volume via alsamixer.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alsamixer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you have more than one audiocard in your computer make sure to switch it by hitting F6.&#xA;You could also try &quot;PulseAudio Volume Control&quot;, which are available in appcenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-04-07T17:16:54.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24010" PostTypeId="2" ParentId="18438" CreationDate="2020-04-07T19:28:04.063" Score="0" Body="&lt;p&gt;Run this command line&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install switchboard-plug-networking&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22344" LastActivityDate="2020-04-07T19:28:04.063" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24013" PostTypeId="1" CreationDate="2020-04-08T07:45:36.293" Score="1" ViewCount="352" Body="&lt;p&gt;Recently when I work with my laptop installed with elementary os，there's no indication the desktop crashed and lightdm restarted. This situation happens several times within days and let me worry about my unfinished work without saving.&#xA;I don't know how, where to start checking this problem. I collect some journal logs but too long for this body. How can I provide for you？&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: elementary&#xA;Description:    elementary OS 5.1.3 Hera&#xA;Release:    5.1.3&#xA;Codename:   hera&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit: I paste some key logs, hope it helps&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;-- Logs begin at Wed 2020-02-12 04:16:11 CST, end at Thu 2020-04-09 08:56:23 CST. --&#xA;Apr 08 14:13:50 aart-ThinkPad-X1 StartPreload.sh[994]: /usr/local/gopreload/bin/StartPreload.sh: line 86: 16355 Terminated              $INSTALLDIR/bin/fmlock.gopreload /tmp/preloadlist.txt 2&amp;gt; /dev/null &amp;gt; /dev/null&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-rtkit-daemon.service-aD1h59: Error opening directory '/var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-rtkit-daemon.service-aD1h59': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-chrony.service-M4ZHy9: Error opening directory '/var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-chrony.service-M4ZHy9': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-colord.service-kfXnyL: Error opening directory '/var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-colord.service-kfXnyL': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-chrony.service-MIWxys: Error opening directory '/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-chrony.service-MIWxys': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-rtkit-daemon.service-PBgkop: Error opening directory '/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-rtkit-daemon.service-PBgkop': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-systemd-resolved.service-E8wmSk: Error opening directory '/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-systemd-resolved.service-E8wmSk': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-systemd-resolved.service-iJFAj0: Error opening directory '/var/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-systemd-resolved.service-iJFAj0': Permission denied&#xA;Apr 08 14:14:08 aart-ThinkPad-X1 gsd-housekeepin[31044]: Failed to enumerate children of /tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-colord.service-FurOJ4: Error opening directory '/tmp/systemd-private-aaccc7ce87bc47a9bc9f2baf19320358-colord.service-FurOJ4': Permission denied&#xA;Apr 08 14:17:01 aart-ThinkPad-X1 CRON[16948]: pam_unix(cron:session): session opened for user root by (uid=0)&#xA;Apr 08 14:17:01 aart-ThinkPad-X1 CRON[16949]: (root) CMD (   cd / &amp;amp;&amp;amp; run-parts --report /etc/cron.hourly)&#xA;Apr 08 14:17:01 aart-ThinkPad-X1 CRON[16948]: pam_unix(cron:session): session closed for user root&#xA;Apr 08 14:18:50 aart-ThinkPad-X1 StartPreload.sh[994]: /usr/local/gopreload/bin/StartPreload.sh: line 86: 16663 Terminated              $INSTALLDIR/bin/fmlock.gopreload /tmp/preloadlist.txt 2&amp;gt; /dev/null &amp;gt; /dev/null&#xA;Apr 08 14:19:03 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: MainController::SogouImePinYinShow&#xA;Apr 08 14:19:03 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: No systemtrayicon available&#xA;Apr 08 14:19:11 aart-ThinkPad-X1 nm-dispatcher[15653]: req:2 'connectivity-change', &quot;/etc/NetworkManager/dispatcher.d/90restart-dnsmasq.sh&quot;: complete: timeout (kill script)&#xA;Apr 08 14:19:37 aart-ThinkPad-X1 io.elementary.cerbere.desktop[31178]: [16014:16033:0408/141937.772937:ERROR:socket_stream.cc(218)] Closing stream with result -2&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 kernel: gala[15548]: segfault at 188 ip 00007fd3b1a5fa00 sp 00007ffdadda31d8 error 4 in libmutter-2.so.0.0.0[7fd3b19b6000+159000]&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 kernel: Code: 66 2e 0f 1f 84 00 00 00 00 00 48 8b 47 50 c3 90 66 2e 0f 1f 84 00 00 00 00 00 8b 87 90 00 00 00 c3 66 0f 1f 84 00 00 00 00 00 &amp;lt;f6&amp;gt; 87 88 01 00 00 08 75 07 48 8b 47 38 c3 66 90 48 8b 47 20 48 8b&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gnome-session[30783]: gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala.desktop[17631]: Window manager warning: Trying to re-add keybinding &quot;switch-to-workspace-last&quot;.&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala.desktop[17631]: Window manager warning: Trying to re-add keybinding &quot;move-to-workspace-last&quot;.&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:192: '/usr/share/plank/themes/Transparent/dock.theme' is read-only!&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'OuterStrokeColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'FillStartColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'FillEndColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'InnerStrokeColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'HorizPadding' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'ItemPadding' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'IndicatorSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'IconShadowSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'UrgentBounceHeight' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'LaunchBounceHeight' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'FadeOpacity' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'ClickTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'UrgentBounceTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'LaunchBounceTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'ActiveTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'SlideTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'FadeTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'HideTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'GlowSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'GlowTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'GlowPulseTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'UrgentHueShift' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'ItemMoveTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'CascadeHide' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: Preferences.vala:378: Missing key 'BadgeColor' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:20:45 aart-ThinkPad-X1 gala[17631]: invalid cast from 'CoglTexture2D' to '(null)'&#xA;Apr 08 14:23:50 aart-ThinkPad-X1 StartPreload.sh[994]: /usr/local/gopreload/bin/StartPreload.sh: line 86: 16872 Terminated              $INSTALLDIR/bin/fmlock.gopreload /tmp/preloadlist.txt 2&amp;gt; /dev/null &amp;gt; /dev/null&#xA;Apr 08 14:27:27 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: MainController::SogouImePinYinShow&#xA;Apr 08 14:27:27 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: No systemtrayicon available&#xA;Apr 08 14:28:50 aart-ThinkPad-X1 StartPreload.sh[994]: /usr/local/gopreload/bin/StartPreload.sh: line 86: 16998 Terminated              $INSTALLDIR/bin/fmlock.gopreload /tmp/preloadlist.txt 2&amp;gt; /dev/null &amp;gt; /dev/null&#xA;Apr 08 14:28:56 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: MainController::SogouImePinYinShow&#xA;Apr 08 14:28:56 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: No systemtrayicon available&#xA;Apr 08 14:29:41 aart-ThinkPad-X1 io.elementary.cerbere.desktop[31178]: [16014:16033:0408/142941.961758:ERROR:socket_stream.cc(218)] Closing stream with result -2&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 kernel: gala[17631]: segfault at 188 ip 00007f114fd1ea00 sp 00007ffd5c502e38 error 4 in libmutter-2.so.0.0.0[7f114fc75000+159000]&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 kernel: Code: 66 2e 0f 1f 84 00 00 00 00 00 48 8b 47 50 c3 90 66 2e 0f 1f 84 00 00 00 00 00 8b 87 90 00 00 00 c3 66 0f 1f 84 00 00 00 00 00 &amp;lt;f6&amp;gt; 87 88 01 00 00 08 75 07 48 8b 47 38 c3 66 90 48 8b 47 20 48 8b&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gnome-session[30783]: gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala.desktop[19305]: Window manager warning: Trying to re-add keybinding &quot;switch-to-workspace-last&quot;.&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala.desktop[19305]: Window manager warning: Trying to re-add keybinding &quot;move-to-workspace-last&quot;.&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:192: '/usr/share/plank/themes/Transparent/dock.theme' is read-only!&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'OuterStrokeColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'FillStartColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'FillEndColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'InnerStrokeColor' for group 'PlankTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'HorizPadding' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'ItemPadding' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'IndicatorSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'IconShadowSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'UrgentBounceHeight' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'LaunchBounceHeight' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'FadeOpacity' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'ClickTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'UrgentBounceTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'LaunchBounceTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'ActiveTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'SlideTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'FadeTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'HideTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'GlowSize' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'GlowTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'GlowPulseTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'UrgentHueShift' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'ItemMoveTime' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'CascadeHide' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: Preferences.vala:378: Missing key 'BadgeColor' for group 'PlankDockTheme' in preferences file '/usr/share/plank/themes/Transparent/dock.theme' - using default value&#xA;Apr 08 14:32:54 aart-ThinkPad-X1 gala[19305]: invalid cast from 'CoglTexture2D' to '(null)'&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 kernel: gala[19305]: segfault at 188 ip 00007f834aa9ea00 sp 00007ffcfa269008 error 4 in libmutter-2.so.0.0.0[7f834a9f5000+159000]&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 kernel: Code: 66 2e 0f 1f 84 00 00 00 00 00 48 8b 47 50 c3 90 66 2e 0f 1f 84 00 00 00 00 00 8b 87 90 00 00 00 c3 66 0f 1f 84 00 00 00 00 00 &amp;lt;f6&amp;gt; 87 88 01 00 00 08 75 07 48 8b 47 38 c3 66 90 48 8b 47 20 48 8b&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session[30783]: gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session-binary[30783]: WARNING: Application 'gala.desktop' killed by signal 11&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session[30783]: gnome-session-binary[30783]: WARNING: App 'gala.desktop' respawning too quickly&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session-binary[30783]: WARNING: App 'gala.desktop' respawning too quickly&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session-binary[30783]: Unrecoverable failure in required component gala.desktop&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session[30783]: gnome-session-binary[30783]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 gnome-session-binary[30783]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 fcitx-ui-sogou-qimpanel.desktop[31483]: ICE default IO error handler doing an exit(), pid = 31486, errno = 11&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 lightdm[5041]: pam_unix(lightdm:session): session closed for user aart&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 kernel: rfkill: input handler enabled&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 bluetoothd[1109]: Endpoint unregistered: sender=:1.63 path=/MediaEndpoint/A2DPSource&#xA;Apr 08 14:32:59 aart-ThinkPad-X1 bluetoothd[1109]: Endpoint unregistered: sender=:1.63 path=/MediaEndpoint/A2DPSink&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Edit: Well, I opened this issue (#766) of gala on github above one weeks ago, they have patched source code already. Now you can receive updates for gala fixed this issue.&lt;/p&gt;&#xA;" OwnerUserId="19234" LastEditorUserId="19234" LastEditDate="2020-04-29T03:41:22.693" LastActivityDate="2020-04-29T03:41:22.693" Title="[Solved]Sometimes lightdm crash and restart with no indication" Tags="|greeter|desktop|crash|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24014" PostTypeId="2" ParentId="23995" CreationDate="2020-04-08T08:03:57.603" Score="0" Body="&lt;p&gt;This issue has been raised here: &lt;a href=&quot;https://github.com/elementary/files/issues/1167&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1167&lt;/a&gt;.  Pressing the Recent bookmark with history off displays an informative message with a link to the Privacy settings so it is not entirely useless.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-04-08T08:03:57.603" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24015" PostTypeId="1" AcceptedAnswerId="24018" CreationDate="2020-04-08T08:27:58.220" Score="0" ViewCount="184" Body="&lt;p&gt;for last 2 days i'am trying to download ISO but every time i get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This site can’t be reached&#xA;The connection was reset.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the link is &lt;a href=&quot;https://ams3.dl.elementary.io/download/MTU4NjMzNDE5NQ==/elementaryos-5.1-stable.20200405.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ams3.dl.elementary.io/download/MTU4NjMzNDE5NQ==/elementaryos-5.1-stable.20200405.iso&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;tried on from different brosers, notebook and so on, no add block etc is used.&lt;/p&gt;&#xA;" OwnerUserId="22317" LastActivityDate="2020-04-08T15:28:13.883" Title="cant download from home page" Tags="|download|iso|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24016" PostTypeId="1" CreationDate="2020-04-08T10:53:04.980" Score="0" ViewCount="348" Body="&lt;p&gt;I cannot find any information about disabling screensaver in Elementary OS. It is possible that it is connected to another app installed on my computer?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Best regards,&#xA;Matthew&lt;/p&gt;&#xA;" OwnerUserId="19187" LastActivityDate="2020-05-08T17:03:10.313" Title="Screensaver in Elementary OS - how to disable it?" Tags="|display|battery|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24017" PostTypeId="2" ParentId="24016" CreationDate="2020-04-08T13:37:02.647" Score="0" Body="&lt;p&gt;Have you manually installed a screensaver or do you mean when the screen goes to black? If so you'll go to &lt;strong&gt;&lt;em&gt;System Settings&lt;/em&gt;&lt;/strong&gt; ==&gt; &lt;strong&gt;&lt;em&gt;Power&lt;/em&gt;&lt;/strong&gt;.&#xA;Under &lt;strong&gt;&lt;em&gt;Turn off display when inactive&lt;/em&gt;&lt;/strong&gt; set it to &lt;strong&gt;&lt;em&gt;Never&lt;/em&gt;&lt;/strong&gt;.&#xA;You can also do it with Suspend set it to &lt;strong&gt;&lt;em&gt;Never&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-04-08T13:37:02.647" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24018" PostTypeId="2" ParentId="24015" CreationDate="2020-04-08T15:28:13.883" Score="0" Body="&lt;p&gt;Try &lt;a href=&quot;https://nyc3.dl.elementary.io/download/MTU4NjMzNDE5NQ==/elementaryos-5.1-stable.20200405.iso&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://nyc3.dl.elementary.io/download/MTU4NjMzNDE5NQ==/elementaryos-5.1-stable.20200405.iso&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some CDN addresses used by Elementary are censor-blocked in parts of the world.&lt;/p&gt;&#xA;" OwnerUserId="22352" LastActivityDate="2020-04-08T15:28:13.883" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24019" PostTypeId="2" ParentId="24016" CreationDate="2020-04-08T15:29:15.377" Score="1" Body="&lt;p&gt;Finally I found working solution. Here it is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.desktop.screensaver lock-delay 3600&#xA;gsettings set org.gnome.desktop.screensaver lock-enabled false&#xA;gsettings set org.gnome.desktop.screensaver idle-activation-enabled false&#xA;&#xA;killall gnome-screensaver ; xset dpms force on&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19187" LastActivityDate="2020-04-08T15:29:15.377" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24021" PostTypeId="2" ParentId="11844" CreationDate="2020-04-08T16:22:12.590" Score="0" Body="&lt;p&gt;@Tobias' answer is correct but is slightly outdated. Here's what you need to do:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Find the base Ubuntu version using &lt;code&gt;&amp;gt; lsb_release -a -u&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Copy the &lt;code&gt;Codename&lt;/code&gt; from the output&lt;/li&gt;&#xA;&lt;li&gt;Replace &lt;strong&gt;$(lsb_release -cs)&lt;/strong&gt; with the &lt;strong&gt;Codename&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;Eg&lt;/em&gt;: If codename is &lt;strong&gt;bionic&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository \&#xA;   &quot;deb [arch=amd64] https://download.docker.com/linux/ubuntu bionic stable&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Edit &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and replace the Elementary OS version (loki, hera etc.) with the above &lt;strong&gt;Codename&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19798" LastActivityDate="2020-04-08T16:22:12.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24024" PostTypeId="1" CreationDate="2020-04-08T20:51:27.387" Score="0" ViewCount="53" Body="&lt;p&gt;My keyboard stop working properly since I installed elementary os&lt;/p&gt;&#xA;&#xA;&lt;p&gt;number six is not working in any of the keys. besides that some keys are not working in my brazil, no dead keys keyboard (I also tried in english - the original)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;those are the things I tried:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10491/dead-keys-not-working-on-elementary-os-loki&quot;&gt;Dead keys not working on Elementary OS Loki&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2371/how-can-i-use-ibus-as-the-default-input-method&quot;&gt;How can I use IBus as the default input method?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2006/problems-with-br-keyboard-in-dell-mini?rq=1&quot;&gt;Problems with BR keyboard in dell mini&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;nothing worked&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I read some place that some keyboards don't work with elementary (?), is it true? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also could not install my bank 'security app' (I follow the bank directions for linux and also some websites in portuguese)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I would appreciate if anybody could help with one of those problems.&#xA;Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my keyboard is like this one: &lt;a href=&quot;https://exact-parts.com/collections/hp-15-bs289wm/products/hp-15-bs289wm-palmrest-keyboard-assembly-w-touchpad-925008-001#mz-expanded-view-1506610706696&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://exact-parts.com/collections/hp-15-bs289wm/products/hp-15-bs289wm-palmrest-keyboard-assembly-w-touchpad-925008-001#mz-expanded-view-1506610706696&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22356" LastEditorUserId="22356" LastEditDate="2020-04-09T23:35:04.353" LastActivityDate="2023-12-23T02:03:45.413" Title="keyboard and bank security app" Tags="|keyboard|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24025" PostTypeId="2" ParentId="22877" CreationDate="2020-04-09T03:21:05.493" Score="0" Body="&lt;p&gt;You should be able to run 5.1.3 Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here are the specs you need:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space  &lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-04-09T03:21:05.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24026" PostTypeId="1" CreationDate="2020-04-09T03:58:50.810" Score="0" ViewCount="607" Body="&lt;p&gt;I am having an issue with the app store where I am only able to see non-curated apps. I am not able to see the pay what you want apps. For example, if I search &quot;Planner&quot; this is what I get:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qG7mS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qG7mS.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried reinstalling the app center a few times and rebooting but nothing is helping. How do I fix this?&lt;/p&gt;&#xA;" OwnerUserId="22360" LastActivityDate="2024-02-09T10:03:20.390" Title="App store is only showing non-curated apps" Tags="|appcenter|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24027" PostTypeId="1" AcceptedAnswerId="24085" CreationDate="2020-04-09T06:45:39.810" Score="0" ViewCount="1497" Body="&lt;p&gt;i installed zoom app via Eddy and it's working normally, but if i close it, the process actually stay in running state, so next time i am trying to launch zoom it's said that it's already running and i have to use killall zoom first, and then it's starts normaly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;Update:&lt;/em&gt;&lt;/strong&gt;&#xA;the problem that on closing, it's stays in system tray, but without an icon, here is a workaround to enable system tray icons&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18067/system-tray-icon-for-nextloud&quot;&gt;System tray icon for Nextloud&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22317" LastEditorUserId="22317" LastEditDate="2020-04-13T09:50:31.630" LastActivityDate="2020-04-13T18:23:58.847" Title="Zoom app not closing correctly" Tags="|release-hera|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24029" PostTypeId="2" ParentId="23965" CreationDate="2020-04-09T12:19:09.127" Score="0" Body="&lt;p&gt;After the update, I had exactly the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These packages are removed:&#xA;ibus&#xA;ibus-table&#xA;switchboard-plug-gcc-color&#xA;switchboard-plug-gcc-sound&#xA;switchboard-plug-gcc-wacom&#xA;unity-control-center&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These packages have been updated:&#xA;ibus-gtk (1.5.11-1ubuntu2.3) to 1.5.11-1ubuntu2.4&#xA;ibus-gtk3 (1.5.11-1ubuntu2.3) to 1.5.11-1ubuntu2.4&#xA;libibus-1.0-5 (1.5.11-1ubuntu2.3) to 1.5.11-1ubuntu2.4&lt;/p&gt;&#xA;" OwnerUserId="22363" LastActivityDate="2020-04-09T12:19:09.127" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24030" PostTypeId="1" AcceptedAnswerId="24031" CreationDate="2020-04-09T12:39:15.147" Score="1" ViewCount="194" Body="&lt;p&gt;I've been having issues getting my touchscreen to work after the update to Linux Kernel &lt;code&gt;5.3.0-46-generic&lt;/code&gt;. I am presently running Elementary OS 5.1.3 &quot;Hera&quot;. System is up to date; just checked AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked &quot;dmesg&quot; and I found this output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[    5.487202] hid-generic 0018:04F3:299E.0004: item 0 1 0 8 parsing failed&#xA;[    5.487250] hid-generic: probe of 0018:04F3:299E.0004 failed with error -22&#xA;[    5.487852] i2c_hid i2c-ELAN9004:00: i2c_hid_get_input: IRQ triggered but there's no data&#xA;[    5.494961] hid-multitouch 0018:04F3:299E.0004: report is too long&#xA;[    5.494991] hid-multitouch 0018:04F3:299E.0004: item 0 1 0 8 parsing failed&#xA;[    5.495033] hid-multitouch: probe of 0018:04F3:299E.0004 failed with error -22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I did find a &lt;a href=&quot;https://forum.manjaro.org/t/elan-touch-screen-not-working-after-kernel-update/126146&quot; rel=&quot;nofollow noreferrer&quot;&gt;similar issue reported on Manjaro Forums&lt;/a&gt; and saw it is fixed as of Linux Kernel 5.4. I'd like help either upgrading my kernel to a newer version without using a PPA, or at least resolving this issue while staying on the kernel I am on. I'm afraid to upgrade the kernel as I do not want to cause issues with updates.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="22364" LastEditorUserId="15904" LastEditDate="2020-04-09T23:24:43.850" LastActivityDate="2020-04-09T23:24:43.850" Title="Kernel 5.3 does not support Elan9004 touch screen" Tags="|release-hera|kernel|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24031" PostTypeId="2" ParentId="24030" CreationDate="2020-04-09T12:54:07.003" Score="0" Body="&lt;p&gt;There's no need to add a PPA to update a kernel. I advise you to delete those PPAs to avoid any issue in the future. You can use the command &lt;code&gt;sudo add-apt-repository --remove&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To install a newer kernel go &lt;a href=&quot;https://kernel.ubuntu.com/%7Ekernel-ppa/mainline/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and choose a version that you like. Then download from the amd64 section the corresponding files with the following names:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;linux-headers*_all.deb&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;linux-headers*generic*.deb&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;linux-image*generic*.deb&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;linux-modules*generic*.deb&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Lastly, install the kernel with &lt;code&gt;sudo apt install ./linux*.deb&lt;/code&gt;. Make sure you open the terminal window in the correct folder.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-04-09T12:54:07.003" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24033" PostTypeId="1" AcceptedAnswerId="24054" CreationDate="2020-04-09T17:01:49.360" Score="0" ViewCount="336" Body="&lt;p&gt;ANY software I install on the system cannot access my OpenGL drivers for whatever reason. Most software uses OpenGL 3.3 and I have exactly that -- OpenGL 3.3, and I checked too! Running &lt;code&gt;glxinfo | grep OpenGL&lt;/code&gt; shows that my drivers are compatible with OpenGL 3.3&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OpenGL vendor string: NVIDIA Corporation&#xA;OpenGL renderer string: GeForce G105M/PCIe/SSE2&#xA;OpenGL core profile version string: 3.3.0 NVIDIA 340.107&#xA;OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler&#xA;OpenGL core profile context flags: (none)&#xA;OpenGL core profile profile mask: core profile&#xA;OpenGL core profile extensions:&#xA;OpenGL version string: 3.3.0 NVIDIA 340.107&#xA;OpenGL shading language version string: 3.30 NVIDIA via Cg compiler&#xA;OpenGL context flags: (none)&#xA;OpenGL profile mask: (none)&#xA;OpenGL extensions:&#xA;OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 340.107 340.107&#xA;OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00&#xA;OpenGL ES profile extensions: &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;No matter what I do, I always get this error whilst running software that uses OpenGL 3.3 :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;libGL error: No matching fbConfigs or visuals found&#xA;libGL error: failed to load driver: swrast&#xA;Failed to create the opengl context. Check your drivers support openGL 3.3. Hint: opensource drivers don't&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried searching online to no avail, so I must turn to this forum for help. Any and all help (that doesn't corrupt my system drivers, haha ️) would be appreciated&lt;/p&gt;&#xA;&#xA;&lt;p&gt;glxinfo | grep -i OpenGL as per T0ba's request:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OpenGL vendor string: NVIDIA Corporation&#xA;OpenGL renderer string: GeForce G105M/PCIe/SSE2&#xA;OpenGL core profile version string: 3.3.0 NVIDIA 340.107&#xA;OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler&#xA;OpenGL core profile context flags: (none)&#xA;OpenGL core profile profile mask: core profile&#xA;OpenGL core profile extensions:&#xA;OpenGL version string: 3.3.0 NVIDIA 340.107&#xA;OpenGL shading language version string: 3.30 NVIDIA via Cg compiler&#xA;OpenGL context flags: (none)&#xA;OpenGL profile mask: (none)&#xA;OpenGL extensions:&#xA;OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 340.107 340.107&#xA;OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00&#xA;OpenGL ES profile extensions:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22365" LastEditorUserId="22365" LastEditDate="2020-04-10T08:12:33.193" LastActivityDate="2020-04-10T20:58:38.863" Title="Software not using/finding OpenGL 3.3 drivers" Tags="|system|graphic-drivers|drivers|graphics|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24034" PostTypeId="2" ParentId="22677" CreationDate="2020-04-09T18:15:53.737" Score="1" Body="&lt;p&gt;I &lt;em&gt;really&lt;/em&gt; don't advise doing this if it's &lt;em&gt;just&lt;/em&gt; for the purpose of saving storage, but you can create a live USB of your distro of choice and then overwrite the partition that had your original install. This will not affect your new OS, but your old one will be completely removed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;IMPORTANT NOTICE: FORMAT THE DRIVE BEFORE YOU INSTALL! THIS CAN AND WILL CAUSE PROBLEMS!&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For some reason, some Linux installers do not (by default) format the partition that you will install Linux on. PLEASE make sure that you format the partition BEFORE beginning the install process. If you are dual-booting, select the 'Something else' option to manually figure out how the partition scheme should be done/divided/whatever&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-09T18:15:53.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24035" PostTypeId="2" ParentId="24033" CreationDate="2020-04-09T18:34:44.173" Score="0" Body="&lt;p&gt;Try to install mesa packages:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt install mesa-va-drivers mesa-vdpau-drivers mesa-vulkan-drivers mesa-utils mesa-utils-extra&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21171" LastActivityDate="2020-04-09T18:34:44.173" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24036" PostTypeId="2" ParentId="22877" CreationDate="2020-04-09T19:22:33.033" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;em&gt;Please make your title clearer to address your problem. A better title would’ve been “I’m running on a low-spec PC, should I downgrade my version of Elementary OS?”&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Yes — for the most part.&#xA;You should be able to run Elementary OS with 2 GBs of RAM but —— as per the website —— 4 GB is recommended for comfortable usage of Elementary OS&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, you should add more detail because there is one thing I can’t answer —— graphics card compatibility. You need to be able to run at least 720p display resolution with your graphics card for Elementary OS to function properly/look proper (&lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;also mentioned on the website&lt;/a&gt;) and you need a display that can support that resolution&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-09T19:22:33.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24037" PostTypeId="2" ParentId="22579" CreationDate="2020-04-09T19:40:20.437" Score="0" Body="&lt;p&gt;This behavior has been changed.&#xA;Now it just copies and pastes whatever path you copy directly. I don’t believe it’s a setting that you can change, but make sure your eOS install is on the latest version with all of the updates.&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-09T19:40:20.437" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24038" PostTypeId="2" ParentId="24027" CreationDate="2020-04-09T19:42:35.057" Score="0" Body="&lt;p&gt;Can you provide more detail?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think your problem here is that Zoom continues to run inside of a tray process so you’ve just go to check your taskbar and see if Zoom is still running on there. If so, click on it and the current running Zoom instance will show itself.&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-09T19:42:35.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24039" PostTypeId="2" ParentId="24001" CreationDate="2020-04-09T20:00:50.373" Score="1" Body="&lt;p&gt;AppCenter doesn’t start downloading updates until you launch it. If you can just cancel the update before it actually begins or if you don’t approve the update, you can just not download and install it and save data... though launching the AppCenter itself might take up a bit of data on it’s own...&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-09T20:00:50.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24040" PostTypeId="1" CreationDate="2020-04-09T23:06:27.963" Score="0" ViewCount="112" Body="&lt;p&gt;I just upgraded to Hera 5.1.3.  My Conky Scripts and Cairo-dock Swither worked fine and were visible on all desktops in version 5.1.2 and before.  Now, after reboot, conky scripts and switcher visible on first desktop appearing.  When I switch to another desktop, the conky scripts and switch disappear, even when going back to the original desktop.&lt;/p&gt;&#xA;" OwnerUserId="22370" LastActivityDate="2020-04-09T23:06:27.963" Title="Hera 5.1.3 Conky Scripts and Cairo-dock Switcher disappear when switching desktops" Tags="|release-hera|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24041" PostTypeId="2" ParentId="23989" CreationDate="2020-04-10T00:14:36.597" Score="1" Body="&lt;p&gt;You no need to run the script at startup each time you can permanently set resolution like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo xrandr --output HDMI-1 --mode 2560x1140&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can get list of your display by running:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Just make sure the resolution you're trying to set is supported by your monitor.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-04-10T00:14:36.597" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24042" PostTypeId="2" ParentId="22878" CreationDate="2020-04-10T05:08:02.630" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Okay, this is weird I just ran it again to get the error message and it has actually fixed my system now. Can anyone advise how it would suddenly fix itself. Literally haven't changed anything and the same commands that were throwing an error have now worked??&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;As said in your comments since it is fixed I would recommend installing &lt;a href=&quot;https://flathub.org/apps/details/org.libreoffice.LibreOffice&quot; rel=&quot;nofollow noreferrer&quot;&gt;LibreOffice from Flathub&lt;/a&gt; as AppCenter now integrates with Flatpak very well.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As an alternative I would recommend that you try out &lt;a href=&quot;https://www.libreoffice.org/download/appimage/&quot; rel=&quot;nofollow noreferrer&quot;&gt;LibreOffice AppImage&lt;/a&gt; as it does not mess with your system, so it's least likely that any AppImage can break your system.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;PPA are not recommended. Even Ubuntu is moving towards Snap.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2020-04-11T02:56:27.243" LastActivityDate="2020-04-11T02:56:27.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24043" PostTypeId="1" CreationDate="2020-04-10T08:31:08.357" Score="0" ViewCount="432" Body="&lt;p&gt;occasionally my pc with elementary os 5.1 (based on Ubuntu 18.04) makes automatic logout session. This problem comes up, after minutes, when I change virtual desktop (ex. clicking on telegram notify that it's in 3rd desktop). No system error messages appear, simply operating system goes to login screen, closing all my work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything has been updated, video driver and operating system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't know what I have to see for resolving this problem. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="22375" LastActivityDate="2024-01-02T11:07:30.973" Title="Elementary OS 5.1 Hera (based Ubuntu 18.04) automatic logout session occasionally" Tags="|release-hera|greeter|desktop|shutdown|session|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24045" PostTypeId="1" CreationDate="2020-04-10T12:41:17.587" Score="0" ViewCount="8" Body="&lt;p&gt;Currently doing web dev and I need to see the decrease in window size further than elementary allows horizontally. &lt;/p&gt;&#xA;" OwnerUserId="21071" LastActivityDate="2020-04-14T20:34:14.870" Title="Can't decrease Chrome size further" Tags="|web-development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24047" PostTypeId="2" ParentId="11694" CreationDate="2020-04-10T16:00:35.097" Score="0" Body="&lt;p&gt;Try formatting it with a different filesystem and see the results. Maybe exFAT will work? It was what I used when installing Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-10T16:00:35.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24051" PostTypeId="1" CreationDate="2020-04-10T19:24:38.100" Score="0" ViewCount="279" Body="&lt;p&gt;I know how to add a running application to the dock; but how can I start an Application, which I know must be present, but I don't know the location? For instance, in a Mac, I would search the &lt;code&gt;/Applications&lt;/code&gt; and &lt;code&gt;$HOME/Applications&lt;/code&gt; directory and their sub directories, but Elementary OS doesn't seem to have something similar. The most promising match seems to be a file /usr/share/applications, but there don't seem to be executables in this directory.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a concrete example, I would like to start the &lt;em&gt;Pantheon&lt;/em&gt; file manager, which, according to &lt;a href=&quot;https://linuxhint.com/elementary_os_file_manager/&quot; rel=&quot;nofollow noreferrer&quot;&gt;what I have read&lt;/a&gt;, should already come with Elementary OS. I tried a&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;find / -name 'pantheon-*' 2&amp;gt;/dev/null&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to locate this program, and found a few matches (for instance as a directory &lt;code&gt;/usr/share/doc/pantheon-files&lt;/code&gt;), but nothing which would look like a suitable executable. &lt;/p&gt;&#xA;" OwnerUserId="22382" LastEditorUserId="15904" LastEditDate="2020-04-13T21:54:44.553" LastActivityDate="2020-04-13T21:54:44.553" Title="Can't add application to the dock" Tags="|release-hera|applications|plank|pantheon|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24052" PostTypeId="2" ParentId="24051" CreationDate="2020-04-10T19:53:20.727" Score="0" Body="&lt;p&gt;The solution to this problem turned out to be a double reboot: After the second reboot, my desktop suddenly contained not only the dock at the bottom, but also a small kind of &quot;status line&quot; on the very top, which on the left had an entry saying &lt;em&gt;Applications&lt;/em&gt;. This status line did not exist before. When clicking on it, I get a list of applications installed, including a File Manager (don't know whether this is Pantheon or not). I still don't know, which directory they are in, but at least I can now start an application from there, and then arrange to keep it in the dock.&lt;/p&gt;&#xA;" OwnerUserId="22382" LastActivityDate="2020-04-10T19:53:20.727" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24053" PostTypeId="2" ParentId="23972" CreationDate="2020-04-10T20:40:55.973" Score="1" Body="&lt;p&gt;The &lt;code&gt;.window-frame&lt;/code&gt; tweak does not work anymore on recent versions of GTK3 due to massive CSS overhaul. Here is a patch that seems to effectively disable these black borders on GTK3 (tested on &lt;a href=&quot;https://github.com/GNOME/gtk/releases/tag/3.24.18&quot; rel=&quot;nofollow noreferrer&quot;&gt;version &lt;code&gt;3.24.18-1&lt;/code&gt; of &lt;code&gt;gtk3&lt;/code&gt;&lt;/a&gt;), to be written in &lt;code&gt;~/.config/gtk-3.0/gtk.css&lt;/code&gt;:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;window &amp;gt; decoration {&#xA;  box-shadow: none;&#xA;  margin: 0;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This kind of solution can be derived using the &lt;a href=&quot;https://wiki.gnome.org/action/show/Projects/GTK/Inspector&quot; rel=&quot;nofollow noreferrer&quot;&gt;GTK Inspector&lt;/a&gt; to debug GTK apps displaying issues.&lt;/p&gt;&#xA;" OwnerUserId="22386" LastActivityDate="2020-04-10T20:40:55.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24054" PostTypeId="2" ParentId="24033" CreationDate="2020-04-10T20:58:38.863" Score="0" Body="&lt;p&gt;The solution turned out to be uninstalling the official Nvidia drivers. My PC is perfectly compatible with these drivers, however, it turns out that there is some sort of magical problem with the drivers, and uninstalling them worked perfectly.&lt;/p&gt;&#xA;" OwnerUserId="22365" LastActivityDate="2020-04-10T20:58:38.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24055" PostTypeId="2" ParentId="24051" CreationDate="2020-04-10T21:31:59.130" Score="1" Body="&lt;p&gt;Yes, &quot;files&quot; is &quot;pantheon files&quot;. It seems to be their strategy to fork everything and simplify it to unusability.&lt;/p&gt;&#xA;" OwnerUserId="22384" LastActivityDate="2020-04-10T21:31:59.130" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24056" PostTypeId="2" ParentId="12399" CreationDate="2020-04-10T21:39:28.540" Score="0" Body="&lt;p&gt;As the message says: It needs the package &quot;ibus&quot;. Install it all at once via &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ibus switchboard-plug-gcc-sound&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22384" LastActivityDate="2020-04-10T21:39:28.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24057" PostTypeId="2" ParentId="19446" CreationDate="2020-04-11T08:05:31.460" Score="2" Body="&lt;p&gt;In my case elementary OS was working fine until I install so many things including software update from app center, then I leave my laptop and when I came back the keyboard and mouse does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I was logged in automatically and I can see the desktop with the mouse pointer, but I'm unable to move the mouse nor type anything on my keyboard (not even changing the screen brightness or volume on function keys)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The solution in my case since I cannot type anything:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I boot into elementary OS secure boot (the the one that has Advanced Options)&lt;/li&gt;&#xA;&lt;li&gt;Select Network to enable network&lt;/li&gt;&#xA;&lt;li&gt;Select Root to enable typing through command line&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;sudo apt-get install --reinstall xserver-xorg-input-all&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I got the answer from &lt;a href=&quot;https://unix.stackexchange.com/questions/174091/mouse-and-keyboard-not-working-in-ubuntu-14-04/174095&quot;&gt;this link&lt;/a&gt;, maybe it can help you with other information&lt;/p&gt;&#xA;" OwnerUserId="22389" LastActivityDate="2020-04-11T08:05:31.460" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24058" PostTypeId="1" CreationDate="2020-04-11T10:27:22.400" Score="1" ViewCount="179" Body="&lt;p&gt;I have 4 gigs of ddr3 and have a 60 gig ssd. I am looking to replace windows&lt;/p&gt;&#xA;" OwnerUserId="22390" LastActivityDate="2024-01-24T18:03:50.523" Title="Can I install elementary os on a atom x5Z8350 and will it run well?" Tags="|system-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24059" PostTypeId="1" CreationDate="2020-04-11T10:30:04.727" Score="0" ViewCount="1273" Body="&lt;p&gt;I want to add a magnyfying effect on plank on elementary os. I've looked into a lot of forum and try what they propose (change the settings file, uninstall and reinstall,...) but that doesn't work. Plank do not zoom. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you any idea why it doesnt work ?&#xA;Thank you !&lt;/p&gt;&#xA;" OwnerUserId="22391" LastActivityDate="2020-04-13T08:54:56.060" Title="Plank on Elementary OS doesn't zoom" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24064" PostTypeId="2" ParentId="24024" CreationDate="2020-04-11T19:34:48.340" Score="0" Body="&lt;p&gt;I could not fix the missing keys problem, but I found out an alternative for now. First of all, from what Ive been reading it seems to be a problem with kernel, since the keyboard works perfectly with windows (even though, windows does not works perfectly for me).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The way I fixed it was creating &quot;phrase&quot; shortcuts on my keyboard using autokey, but instead of a whole phrase I pasted number 6 and a few other missing keys from some old document.&#xA;And shortcuts options are pretty easy. eg: shift+/ = 6&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is what helped me: &lt;a href=&quot;https://askubuntu.com/questions/280604/assign-hotkeys-to-paste-predefined-text&quot;&gt;https://askubuntu.com/questions/280604/assign-hotkeys-to-paste-predefined-text&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I still didn't fix the bank thing, but it is less important)&lt;/p&gt;&#xA;" OwnerUserId="22356" LastActivityDate="2020-04-11T19:34:48.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24066" PostTypeId="2" ParentId="24027" CreationDate="2020-04-11T22:16:13.233" Score="0" Body="&lt;p&gt;There is an &quot;Exit&quot; menu item in Zoom that prevents the app from continuing to run in the background when you close the window:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Tk9ZA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tk9ZA.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2020-04-11T22:16:13.233" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24067" PostTypeId="1" CreationDate="2020-04-12T01:32:41.800" Score="1" ViewCount="17" Body="&lt;p&gt;I'm wanting my money back. This Elementary OS refuses any sort of admin controls to copy files for theming. I've used other file managers as well. Can't install gksu/gksudo, can't edit with gedit. The whole system is locked down to basic. Not what interests me.&lt;/p&gt;&#xA;" OwnerUserId="22402" LastActivityDate="2020-04-12T01:32:41.800" Title="No Admin controls for file manager - refuses admin control for others" Tags="|software-installation|root|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24068" PostTypeId="2" ParentId="24058" CreationDate="2020-04-12T02:07:23.657" Score="0" Body="&lt;p&gt;Here are the specs you need:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Your RAM and Hard Drive meet the requirements. Looks like your processor is a Quad-core 64-bit.  I'd say elementary OS will run on your machine. &lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-04-12T02:07:23.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24069" PostTypeId="2" ParentId="2860" CreationDate="2020-04-12T10:15:17.707" Score="2" Body="&lt;p&gt;For those who are looking for the current gsettings command, it's&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.desktop.wingpanel use-transparency true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On my Hera it was already set to true however, so it didn't really solve the original problem.&lt;/p&gt;&#xA;" OwnerUserId="22405" LastActivityDate="2020-04-12T10:15:17.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24073" PostTypeId="1" CreationDate="2020-04-12T16:27:26.797" Score="0" ViewCount="763" Body="&lt;p&gt;I am newbue at Elementary but also have some experience in Ubuntu. &#xA;I recently installed elementary, but wifi did not configure automatically. I have no way to connect my computer to the Internet via wire. How do I configure wifi offline? Or where and which drivers to download to solve this problem?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Broadcom 14e4:4365 rev 01&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22412" LastActivityDate="2023-12-26T01:06:40.963" Title="Can i install Broadcom wifi driver offline?" Tags="|settings|wifi|networking|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24076" PostTypeId="1" AcceptedAnswerId="24078" CreationDate="2020-04-12T22:23:05.437" Score="1" ViewCount="172" Body="&lt;p&gt;Getting this error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;E: The repository 'cdrom://elementary OS 5.1 &lt;em&gt;hera&lt;/em&gt; - stable amd64&#xA;  (20191202) bionic Release' does not have a Release file.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="20077" LastActivityDate="2020-04-14T23:07:55.583" Title="Unable to update" Tags="|updates|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24078" PostTypeId="2" ParentId="24076" CreationDate="2020-04-13T03:24:56.670" Score="5" Body="&lt;p&gt;It looks like you have enable your CD-rom as part of your sourcelist. You need to disable it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the terminal and type (or copy/paste):&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano '/etc/apt/sources.list'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should look like this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BXblI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BXblI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Set a &lt;strong&gt;#&lt;/strong&gt; infront where it says &lt;strong&gt;deb cd-rom&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So it looks like this:&#xA;&lt;strong&gt;# deb cdrom:[elementary OS 5.1 &lt;em&gt;hera&lt;/em&gt; - stable amd64 (20191202)]/ bionic contrib main non-free&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save: &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;o&lt;/kbd&gt;&#xA;exit: &lt;kbd&gt;ctrl&lt;/kbd&gt;+&lt;kbd&gt;x&lt;/kbd&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now try again running the update:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="12483" LastEditDate="2020-04-14T23:07:55.583" LastActivityDate="2020-04-14T23:07:55.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24079" PostTypeId="2" ParentId="24059" CreationDate="2020-04-13T08:54:56.060" Score="1" Body="&lt;p&gt;looks like elementary OS team can't ship plank with this effect due to some kind of conflict with apple's patents.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can try to install plank from Rico's ppa; the version in this ppa should include the magnifying effect, as explained &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1933/plank-magnifying-effect&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-13T08:54:56.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24080" PostTypeId="1" AcceptedAnswerId="24087" CreationDate="2020-04-13T10:07:42.943" Score="3" ViewCount="770" Body="&lt;p&gt;Recently I installed Elementary OS Hera on my Dell XPS 9570 and it seemed to be working perfectly fine until I ran into this problem: my keyboard is not responding in Greeter and I cannot login into the system. &lt;code&gt;CTRL+ALT+F2&lt;/code&gt; does not work too. Mouse and OS seem to be working fine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Being a complete beginner here I suppose I need to reinstall input drivers, but I have no idea how to do that without keyboard. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a way to fix this without reinstalling the system?&lt;/p&gt;&#xA;" OwnerUserId="22420" LastActivityDate="2020-04-13T21:16:34.790" Title="Keyboard not working in login screen" Tags="|release-hera|greeter|keyboard|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24081" PostTypeId="1" CreationDate="2020-04-13T15:04:33.077" Score="1" ViewCount="64" Body="&lt;p&gt;for some performance reasons, I have installed icewm on elementary os hera .&#xA;I want to discover which services start for a pantheon-session by default , and enable them in icewm-session manually .&#xA;what are these services and is this possible to start them manually?&#xA;for example what is the default compositor and how can be enabled by command line?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inxi -Fxz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;output of my system :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;&#xA;System:    Host: Master-PC Kernel: 5.0.0-37-generic x86_64 bits: 64 gcc: 7.4.0&#xA;           Desktop: IceWM 1.4.3.0~pre-20180217 Distro: elementary OS 5.1 Hera&#xA;Machine:   Device: laptop System: LENOVO product: 33668DG v: ThinkPad Edge E530c serial: N/A&#xA;           Mobo: LENOVO model: 33668DG serial: N/A&#xA;           UEFI [Legacy]: LENOVO v: J0ET15WW (1.05 ) date: 08/02/2013&#xA;Battery    BAT0: charge: 28.2 Wh 100.0% condition: 28.2/40.4 Wh (70%) model: LGC 45N1049 status: Full&#xA;CPU:       Dual core Intel Core i5-3320M (-MT-MCP-) arch: Ivy Bridge rev.9 cache: 3072 KB&#xA;           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 10375&#xA;           clock speeds: max: 3300 MHz 1: 1211 MHz 2: 1245 MHz 3: 1260 MHz 4: 1301 MHz&#xA;Graphics:  Card-1: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0&#xA;           Card-2: NVIDIA GF119M [GeForce 610M] bus-ID: 01:00.0&#xA;           Display Server: x11 (X.Org 1.20.4 ) drivers: modesetting,nvidia (unloaded: fbdev,vesa,nouveau)&#xA;           Resolution: 1366x768@60.00hz&#xA;           OpenGL: renderer: GeForce 610M/PCIe/SSE2 version: 4.6.0 NVIDIA 390.116 Direct Render: Yes&#xA;Audio:     Card Intel 7 Series/C216 Family High Def. Audio Controller&#xA;           driver: snd_hda_intel bus-ID: 00:1b.0&#xA;           Sound: Advanced Linux Sound Architecture v: k5.0.0-37-generic&#xA;Network:   Card-1: Broadcom and subsidiaries BCM4313 802.11bgn Wireless Network Adapter&#xA;           driver: bcma-pci-bridge bus-ID: 03:00.0&#xA;           IF: wlp3s0b1 state: down mac: &#xA;           Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller&#xA;           driver: r8169 port: 2000 bus-ID: 0c:00.0&#xA;           IF: enp12s0 state: up speed: 100 Mbps duplex: full mac: &#xA;Drives:    HDD Total Size: 500.1GB (39.6% used)&#xA;           ID-1: /dev/sda model: WDC_WD5000LPVX size: 500.1GB temp: 44C&#xA;Partition: ID-1: / size: 29G used: 7.8G (29%) fs: ext4 dev: /dev/sda8&#xA;           ID-2: swap-1 size: 6.29GB used: 0.00GB (0%) fs: swap dev: /dev/sda4&#xA;RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present&#xA;Sensors:   System Temperatures: cpu: 48.0C mobo: N/A gpu: 0.0:45C&#xA;           Fan Speeds (in rpm): cpu: 0&#xA;Info:      Processes: 225 Uptime: 33 min Memory: 1620.0/3541.3MB Init: systemd runlevel: 5 Gcc sys: 7.5.0&#xA;           Client: Shell (zsh 5.4.2) inxi: 2.3.56 &#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="22422" LastActivityDate="2020-04-13T15:04:33.077" Title="what services start during pantheon-session startup ?" Tags="|startup|window-manager|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24082" PostTypeId="1" CreationDate="2020-04-13T15:10:40.150" Score="1" ViewCount="33" Body="&lt;p&gt;I have a Asus monitor connected to my desktop computer. The screen resolution is 1920 x 1080 and it's connected with a DVI cable.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything works fine. When a power on the computer, I can see the login screen.&#xA;But if I use Win + L to lock the screen, or if I switch between terminal (CTRL + ALT + F1 / F2...), the screen powers off and shows the message: No DVI signal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, it keeps running on the background. If I carefully type my password, I can log in. Or if I swith again to desktop mode (CTRL + ALT + F7) I can see again my screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My video card is &quot;NVIDIA Corporation GT218 [GeForce 210]&quot; on a i5-3470. I'm using Hera (5.1.3)&#xA;No problems so far with it, besides these two weird things.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="22423" LastActivityDate="2020-04-13T15:10:40.150" Title="DVI not working on lock window or terminal" Tags="|display|release-hera|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24083" PostTypeId="1" CreationDate="2020-04-13T16:41:48.893" Score="1" ViewCount="1031" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ofNFb.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ofNFb.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't see the wireless wifi setting after installing. Am i missing any drivers?&lt;a href=&quot;https://i.stack.imgur.com/PvrDl.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PvrDl.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here's my usb list.. what to do now? &lt;/p&gt;&#xA;" OwnerUserId="22406" LastActivityDate="2024-01-02T03:04:25.533" Title="Can't find wireless wifi setting in Hera" Tags="|wifi|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24084" PostTypeId="2" ParentId="17618" CreationDate="2020-04-13T18:13:32.200" Score="1" Body="&lt;p&gt;This solution worked for me so far:&lt;/p&gt;&#xA;&lt;p&gt;Edit &lt;code&gt;/etc/bluetooth/input.conf&lt;/code&gt; and under section [General], uncomment the line IdleTimeout=0&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Set idle timeout (in minutes) before the connection will&#xA;# be disconnect (defaults to 0 for no timeout)&#xA;IdleTimeout=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Interesting that defaults to 0... but in my computer bluetooth was disconnected after roughly 10 minutes.&lt;/p&gt;&#xA;&lt;p&gt;After specifically defining &amp;quot;0&amp;quot;, I tested with more than 1 hour inactivity.&#xA;Also, I switched the USB adaptor from a regular USB port to a USB 2.0 port (it didn't fix the problem before, but since I enabled the IdleTimeout, it's working now).&lt;/p&gt;&#xA;&lt;p&gt;Hope it helps you too...&lt;/p&gt;&#xA;" OwnerUserId="22423" LastEditorUserId="26" LastEditDate="2020-07-07T08:29:11.493" LastActivityDate="2020-07-07T08:29:11.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24085" PostTypeId="2" ParentId="24027" CreationDate="2020-04-13T18:23:58.847" Score="2" Body="&lt;p&gt;Also, you can configure Zoom to quit the application when closed. That's my default mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Zoom configuration (cog icon on the main window) and Under &lt;em&gt;General &gt; Application&lt;/em&gt; check &lt;em&gt;When closed, quit the application directly&quot;&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With this configuration, Zoom will close whenever you want to be closed. Otherwise, just minimize and keep it running (and accesible via Plank panel).&lt;/p&gt;&#xA;" OwnerUserId="22423" LastActivityDate="2020-04-13T18:23:58.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24086" PostTypeId="2" ParentId="24083" CreationDate="2020-04-13T19:34:15.387" Score="0" Body="&lt;p&gt;AFAIK, there is no separate network manager module for wifi, so I can exclude the case you are missing some piece of nm.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next, I assume your wifi card is the Realtek one. If this is the case, it's good because, at least, it's been detected. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this is the case, try to install ubuntu-drivers-common, which is a gui to help you install proprietary drivers (if I remember correctly it's not installed by default).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install ubuntu-drivers-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After having installed this basically if you go into the installed applications in the app store you'll see that it will suggest you to install some proprietary drivers&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lSmQT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lSmQT.png&quot; alt=&quot;see attached screenshot&quot;&gt;&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another check you can do is if this wifi card is enabled; you can perform this check through rfkill&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;rfkill list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and if the wireless card is blocked/turned off just type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rfkill unblock all&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Of course, if the realtek device that appears in your lsusb is not the wireless card, this could means that it was not been even detected&lt;/p&gt;&#xA;" OwnerUserId="22414" LastEditorUserId="22414" LastEditDate="2020-04-13T20:23:20.187" LastActivityDate="2020-04-13T20:23:20.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24087" PostTypeId="2" ParentId="24080" CreationDate="2020-04-13T21:16:34.790" Score="4" Body="&lt;p&gt;After a day of suffering, I finally managed to find a solution. These are the steps that you want to do if you have a similar problem:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot into Elementary OS live USB.&lt;/li&gt;&#xA;&lt;li&gt;Mount root partition and proc, dev, sys subsystems of the installed OS.&lt;/li&gt;&#xA;&lt;li&gt;Start bash with &lt;code&gt;chroot /mnt/hdd /bin/bash&lt;/code&gt; command. &lt;code&gt;/mnt/hdd&lt;/code&gt; is your mount.&lt;/li&gt;&#xA;&lt;li&gt;Copy &lt;code&gt;resolv.conf&lt;/code&gt; from live usb to mount.&lt;/li&gt;&#xA;&lt;li&gt;Install Xserver package &lt;code&gt;sudo apt install xserver-xorg-input-all&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;My keyboard started working normally after that. I was following &lt;a href=&quot;https://serverfault.com/a/857480&quot;&gt;this&lt;/a&gt; answer.&lt;/p&gt;&#xA;" OwnerUserId="22420" LastActivityDate="2020-04-13T21:16:34.790" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24088" PostTypeId="1" CreationDate="2020-04-14T03:03:51.830" Score="0" ViewCount="84" Body="&lt;p&gt;I imported an album into the Music app and when I disconnected the drive (a few hours later) all the songs came up with an error and the songs were never imported.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Under preferences, I selected 'Keep Music folder organised' and 'Copy imported files to Library'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I imported the music by 'Import to Library...' in the gear menu.&lt;/p&gt;&#xA;" OwnerUserId="19452" LastEditorUserId="15904" LastEditDate="2020-04-15T14:47:05.407" LastActivityDate="2020-04-15T14:47:05.407" Title="Music Import does not work" Tags="|applications|music|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24091" PostTypeId="2" ParentId="22861" CreationDate="2020-04-14T07:17:40.667" Score="1" Body="&lt;p&gt;I recall that the rc.local way of working became obsolete a couple of years ago with the switch of ubuntu to upstart and then to systemd&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd avoid to uninstall the bluetooth as the bluetoot packages can make you uninstall other important packages (you know, dependencies)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To disable the bluetooth you can try with rfkill or by installing tlp and configuring it properly; you can install tlp by simply typing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install tlp tlp-rdw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;the user guide on the website is &lt;a href=&quot;https://linrunner.de/en/tlp/docs/tlp-configuration.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;very detailed and exhaustive&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But if you don't want to use tlp (which, btw, if you have a notebook, is highly recommended as it makes you save a lot of battery), I think the rfkill solution should work for your case&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-14T07:17:40.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24093" PostTypeId="2" ParentId="8927" CreationDate="2020-04-14T08:45:58.047" Score="0" Body="&lt;p&gt;Setting up a swapfile, and adding pm-utils and uswsusp worked for me just fine with sudo pm-hibernate, but no way to add it in the power menu without rebuilding wingpanel....ouch.&lt;/p&gt;&#xA;" OwnerUserId="22313" LastActivityDate="2020-04-14T08:45:58.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24096" PostTypeId="2" ParentId="24058" CreationDate="2020-04-14T09:45:41.910" Score="0" Body="&lt;p&gt;Definitely yes. I'm running eOS on a machine with Intel Core M3-7Y30 which is dual core and runs up to 2,6 GHz with turbo boost, otherwise it's 1 GHz max, 4 gb ram and 128 ssd and it runs nice and smoothly&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-14T09:45:41.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24098" PostTypeId="2" ParentId="24073" CreationDate="2020-04-14T10:10:27.773" Score="0" Body="&lt;p&gt;The output of lsusb is not enough to understand the exact model of the wifi card. For more details try&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lsusb -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;lshw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then, take a look at my answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24083/cant-find-wireless-wifi-setting-in-hera/24086#24086&quot;&gt;here&lt;/a&gt;&#xA;Basically if the system detected the wifi card but needs proprietary drivers to work, you should see the suggestion in the appcenter&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Otherwise, when you have the exact model just google for the drivers&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-14T10:10:27.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24100" PostTypeId="1" CreationDate="2020-04-14T13:45:15.110" Score="0" ViewCount="454" Body="&lt;p&gt;I have been struggling with a sound problem for months now so I thought someone could help me here, I'll try to give as much details as I can but I'm pretty new to the whole Linux ecosystem and not sure wich informations are useful or not. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;The problem :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My laptop (DELL-G3-3590) runs a dual-boot windows/ elementary OS Hera, when I first installed elementary OS, everything was fine except that I needed nvidia drivers to run a dual-screen, I installed them ( nvidia-driver-430 ) and the sound stopped working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It seems that ALSA is only detecting the nvidia GPU sound card with the HDMI sound chipset. The internal speakers and microphone are no longer detected in the audio settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS : On windows, everything works fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;My configuration :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My graphic card is a Nvidia Geforce GTX 1660 Ti. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The two audio related cards in my computer are the following (from &lt;code&gt;sudo lspci -vv&lt;/code&gt;) :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;00:1f.3 Multimedia audio controller: Intel Corporation Cannon Lake PCH cAVS (rev 10)&#xA;    Subsystem: Dell Device 0949&#xA;    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-&#xA;    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR- INTx-&#xA;    Latency: 32, Cache Line Size: 64 bytes&#xA;    Interrupt: pin A routed to IRQ 16&#xA;    Region 0: Memory at a52a0000 (64-bit, non-prefetchable) [size=16K]&#xA;    Region 4: Memory at a5000000 (64-bit, non-prefetchable) [size=1M]&#xA;    Capabilities: [50] Power Management version 3&#xA;        Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)&#xA;        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-&#xA;    Capabilities: [80] Vendor Specific Information: Len=14 &amp;lt;?&amp;gt;&#xA;    Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+&#xA;        Address: 0000000000000000  Data: 0000&#xA;    Kernel driver in use: sof-audio-pci&#xA;    Kernel modules: snd_hda_intel, sof_pci_dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;01:00.1 Audio device: NVIDIA Corporation Device 1aeb (rev a1)&#xA;    Subsystem: Dell Device 0949&#xA;    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-&#xA;    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR- INTx-&#xA;    Latency: 0, Cache Line Size: 64 bytes&#xA;    Interrupt: pin B routed to IRQ 17&#xA;    Region 0: Memory at a30d0000 (32-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: [60] Power Management version 3&#xA;        Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)&#xA;        Status: D3 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-&#xA;    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+&#xA;        Address: 0000000000000000  Data: 0000&#xA;    Capabilities: [78] Express (v2) Endpoint, MSI 00&#xA;        DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 &amp;lt;64us&#xA;            ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W&#xA;        DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-&#xA;            RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+&#xA;            MaxPayload 128 bytes, MaxReadReq 512 bytes&#xA;        DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-&#xA;        LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s &amp;lt;512ns, L1 &amp;lt;4us&#xA;            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+&#xA;        LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+&#xA;            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-&#xA;        LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-&#xA;        DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR+, OBFF Via message&#xA;        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled&#xA;        LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1-&#xA;             EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-&#xA;    Capabilities: [100 v2] Advanced Error Reporting&#xA;        UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-&#xA;        UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-&#xA;        UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-&#xA;        CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-&#xA;        CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+&#xA;        AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-&#xA;    Kernel driver in use: snd_hda_intel&#xA;    Kernel modules: snd_hda_intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I've tried :&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried many solutions found on the internet but none of them worked, still, as long as I remember, I tried: &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Changing default sound card with alsamixer : the only sound card detected is the Nvidia HDA with the HDMI chipset&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Changing sound card priorities in my BIOS : it doesn't offer that possibilty, I can only enable or disable the sound card ( it is enabled ) &lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Removing all files in ~/.config/pulse : after a reboot they were all back there, it may be useful to note that the wen &lt;code&gt;pulseaudio&lt;/code&gt; in a terminal, I get the following output : &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: [pulseaudio] pid.c: Daemon already running.&#xA;E: [pulseaudio] main.c: Failure of pa_pid_file_create().&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Blacklisting snd-hda-intel in &lt;code&gt;/etc/modprobe.d/blacklist.conf&lt;/code&gt;, based on &lt;a href=&quot;https://techgage.com/news/disabling_nvidias_hdmi_audio_under_linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt; : both of my soundcards uses snd-hda-intel so I just had no sound card at all. &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;And I think that's it, I tried a few stuff with alsa configuration that I can't remember precisely. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope someone will be able to help. Thank your for your time and if you need any additional informations please ask me. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit : I just booted in usb to check what alsamixer shows when the sound works, the sound card I'm trying to get to work is an &lt;strong&gt;HDA Intel PCH&lt;/strong&gt; with the chip &lt;strong&gt;ALC3254&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22440" LastEditorUserId="15904" LastEditDate="2020-04-15T09:54:57.667" LastActivityDate="2020-05-15T14:00:45.113" Title="Sound card not detected after Nvidia driver installation" Tags="|release-hera|sound|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24101" PostTypeId="2" ParentId="8146" CreationDate="2020-04-14T14:22:10.267" Score="0" Body="&lt;p&gt;Below there is a link which contains a source.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/kossoy/f87acbdc5b14e06bb20a2da645666637&quot; rel=&quot;nofollow noreferrer&quot;&gt;git bashrc source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-14T14:22:10.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24102" PostTypeId="1" CreationDate="2020-04-14T14:55:10.117" Score="1" ViewCount="651" Body="&lt;p&gt;How do I mount an ISO? I tried 'mount' with the 'loop' option and get a 'failed to setup loop device' message. I've read elsewhere of installing gnome-disk-utilities or another software but am not sure how I go about installing them. Any suggestions would be helpful.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Srini&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2020-04-15T12:38:10.033" Title="Mount an ISO in Elementary 5.1.3" Tags="|mount|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24103" PostTypeId="1" CreationDate="2020-04-14T16:10:44.943" Score="0" ViewCount="1783" Body="&lt;p&gt;Once I tried to install Opera browser to Elementary OS. OK it was work for one time as minim. But after this action my repositories list was broken and elementary cannot update itself because some mistakes in access to repositories. Please tell me how I can restore original repositories list?&lt;/p&gt;&#xA;" OwnerUserId="22442" LastActivityDate="2020-04-14T20:10:34.743" Title="How I can restore original repositories list?" Tags="|updates|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24104" PostTypeId="2" ParentId="21432" CreationDate="2020-04-14T17:24:58.160" Score="0" Body="&lt;p&gt;Please do not contribute to further duplication of the volunteer localization efforts. The actual intent is to provide a single, generic translation to Spanish, without localisms. The fact that the Website project at Weblate has multiple Spanish locales enabled is unfortunate, and IMHO those should be deleted.&lt;/p&gt;&#xA;" OwnerUserId="784" LastActivityDate="2020-04-14T17:24:58.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24105" PostTypeId="2" ParentId="24103" CreationDate="2020-04-14T20:03:29.140" Score="1" Body="&lt;p&gt;The main repository file is &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; and the sources you add usually go there as lines or into &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt; folder as &lt;code&gt;*.list&lt;/code&gt; files. I do not know your linux and terminal skills but you can edit the above file using terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you attempt to do this, do a backup of the file first&lt;/strong&gt;, for example into your home folder with &lt;code&gt;sudo cp /etc/apt/sources.list ~/&lt;/code&gt;  . &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to edit the file you have to type into terminal &lt;code&gt;sudoedit /etc/apt/sources.list&lt;/code&gt; and you will open this file for edit after you authorize yourself as an administrator user. If the only problem is the opera repo and it is inside this file you can comment it with the &lt;code&gt;#&lt;/code&gt; sign in the beginning of the lines, save it with &lt;kbd&gt;ctl&lt;/kbd&gt;+&lt;kbd&gt;o&lt;/kbd&gt; and close it with &lt;kbd&gt;ctl&lt;/kbd&gt;+&lt;kbd&gt;x&lt;/kbd&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If the broken repos are not in this file they should be into the &lt;code&gt;sources.list.d&lt;/code&gt; folder and you can move them to a backup folder with &lt;code&gt;sudo mkdir ~/backup&lt;/code&gt; to create the folder and the move command is &lt;code&gt;sudo mv /etc/apt/sources.list.d/file-you-want-to-remove.list ~/backup/&lt;/code&gt;. You can see the folder contents with &lt;code&gt;ls /etc/apt/sources.list.d/&lt;/code&gt; , the files with the &lt;code&gt;.save&lt;/code&gt; extention are backups of the corresponding &lt;code&gt;.list&lt;/code&gt; files. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In this folder should remain the &lt;strong&gt;&lt;code&gt;elementary.list&lt;/code&gt;&lt;/strong&gt; file which contains information for the main elementary os repo on launchpad, &lt;strong&gt;you have to keep it there&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All other files can be safely moved, if you need them back - just reverse the source and detination of the move command - &lt;code&gt;sudo mv ~/backup/file-to-restore.list /etc/apt/sources.list.d/&lt;/code&gt;  .&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-04-14T20:10:34.743" LastActivityDate="2020-04-14T20:10:34.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24106" PostTypeId="2" ParentId="24045" CreationDate="2020-04-14T20:34:14.870" Score="1" Body="&lt;p&gt;Right mouse click into the web page and choose &quot;Inspect element&quot; - it should open the web dev browser inspector with a lot of options for screen sizes including larger than your monitor (with some zoom applied). All browsers should have this option.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-04-14T20:34:14.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24107" PostTypeId="1" CreationDate="2020-04-14T20:42:17.090" Score="3" ViewCount="114" Body="&lt;p&gt;Just looking into elementary OS, and it looks really attractive. I'm a heavy Emacs user; consequently I feel at home on macOS where I can hit &lt;code&gt;Ctrl-a&lt;/code&gt;, &lt;code&gt;Ctrl-e&lt;/code&gt;, &lt;code&gt;Ctrl-k&lt;/code&gt;, etc. to move around, delete lines, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does elementary OS allow you to set those keystroke system-wide? I'd like to be able to, say, use those when I'm entering text on StackExchange as well as within the address bar of a browser or anywhere I have to enter text.&lt;/p&gt;&#xA;" OwnerUserId="22446" LastActivityDate="2021-11-07T20:07:40.773" Title="Can I enable Emacs-like keybindings throughout the operating system?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24108" PostTypeId="2" ParentId="24026" CreationDate="2020-04-14T21:20:23.313" Score="0" Body="&lt;p&gt;It looks like planner is not only a Non curated app but it is free (no payment option)&lt;a href=&quot;https://i.stack.imgur.com/ApWxP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ApWxP.png&quot; alt=&quot;planner&quot;&gt;&lt;/a&gt; if you click on the icon there is an option for an Appcenter app and non curated (flathub) version of the app&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yoxxe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yoxxe.png&quot; alt=&quot;planer options&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recomend you to click on the icon and see do you have an AppCenter option available also&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-04-14T21:20:23.313" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24110" PostTypeId="1" CreationDate="2020-04-14T22:28:43.373" Score="0" ViewCount="29" Body="&lt;p&gt;When I try to lock my PC with the shortcut meta-L or in the power menu nothing happens.&#xA;I can lock my PC with &lt;code&gt;dm-tool lock&lt;/code&gt; but that is not very handy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone knows a fix for this problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Flor&lt;/p&gt;&#xA;" OwnerUserId="22448" LastActivityDate="2023-10-04T21:20:49.373" Title="Does anyone know why I cant lock my pc" Tags="|lock|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24114" PostTypeId="2" ParentId="24100" CreationDate="2020-04-15T12:26:50.830" Score="1" Body="&lt;p&gt;I manage to make the sound work today. &#xA;To anyone having the same issue, adding the following line in &lt;code&gt;/etc/modprobe.d/alsa-base.conf&lt;/code&gt; made my sound work : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;options snd-hda-intel dmic_detect=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My microphone isn't working but it wasn't working before neither. &lt;/p&gt;&#xA;" OwnerUserId="22440" LastActivityDate="2020-04-15T12:26:50.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24116" PostTypeId="2" ParentId="24102" CreationDate="2020-04-15T12:38:10.033" Score="1" Body="&lt;p&gt;I guess &quot;sudo apt install furiusisomount&quot; did the job. &lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2020-04-15T12:38:10.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24118" PostTypeId="1" CreationDate="2020-04-15T16:12:25.080" Score="1" ViewCount="632" Body="&lt;p&gt;Bluetooth keyboard and mouse frequently stops reconnecting. I see them trying to find the computer but they don't reconnect. Pressing connect manually from the bluetooth settings never works.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This only happens with my bluetooth mouse and keyboard. My 2 types of bluetooth headphones reconnect just fine.&lt;/li&gt;&#xA;&lt;li&gt;It happens unpredictably and frequently (like once a day)&lt;/li&gt;&#xA;&lt;li&gt;I can't reproduce it by just turning off, on my mouse or keyboard or just suspending my laptop. But I can reproduce this by doing both.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;To get them connected again I go to the Bluetooth settings and re-pair the devices. Removing the existing devices for them isn't actually necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When this happens I checked &lt;code&gt;hciconfig&lt;/code&gt;, it looks like my laptop's bluetooth device was in a pscan mode. So a fix mentioned in the following comment probably won't work for me.&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/249448#yui_3_10_3_1_1586957376032_691&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/249448#yui_3_10_3_1_1586957376032_691&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;hciconfig&#xA;hci0:   Type: Primary  Bus: USB&#xA;  BD Address: 9C:B6:D0:D4:B2:52  ACL MTU: 1024:8  SCO MTU: 50:8&#xA;  UP RUNNING PSCAN&#xA;  RX bytes:2197035 acl:32474 sco:2270 events:215262 errors:0&#xA;  TX bytes:132474588 acl:214704 sco:1717 commands:365 errors:0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Probably not relevant but it's super weird that the device is both listed under Paired Devices as Nearby devices.&#xA;{image}&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not sure if relevant but while pairing a couple of times, using other tools I notice the mac address of my mouse seems to change:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;D8:2F:80:B9:15:8E&lt;/li&gt;&#xA;&lt;li&gt;D8:2F:80:B9:15:8F&lt;/li&gt;&#xA;&lt;li&gt;D8:2F:80:B9:15:90&lt;/li&gt;&#xA;&lt;li&gt;D8:2F:80:B9:15:91&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I also used bluetoothctl to trust and connect but that doesn't change anything.&#xA;This is the &lt;code&gt;info&lt;/code&gt; after successfully pairing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Device D8:2F:80:B9:15:91 (random)&#xA;    Name: M720 Triathlon&#xA;    Alias: M720 Triathlon&#xA;    Appearance: 0x03c2&#xA;    Icon: input-mouse&#xA;    Paired: yes&#xA;    Trusted: yes&#xA;    Blocked: no&#xA;    Connected: yes&#xA;    LegacyPairing: no&#xA;    UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)&#xA;    UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)&#xA;    UUID: Device Information        (0000180a-0000-1000-8000-00805f9b34fb)&#xA;    UUID: Battery Service           (0000180f-0000-1000-8000-00805f9b34fb)&#xA;    UUID: Human Interface Device    (00001812-0000-1000-8000-00805f9b34fb)&#xA;    UUID: Vendor specific           (00010000-0000-1000-8000-011f2000046d)&#xA;    Modalias: usb:v046DpB015d0007&#xA;    RSSI: -67&#xA;    TxPower: 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I tried reconnecting using bluetoothctl but it also fails. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~ bluetoothctl&#xA;Agent registered&#xA;[bluetooth]# devices&#xA;Device D8:2F:80:B9:15:91 M720 Triathlon&#xA;Device 20:9B:A5:82:E8:EC SoundBuds Slim&#xA;Device 20:9B:A5:91:46:58 SoundBuds Slim&#xA;Device 2C:41:A1:E8:2E:1F Bose QuietControl 30&#xA;[bluetooth]# connect D8:2F:80:B9:15:91&#xA;Attempting to connect to D8:2F:80:B9:15:91&#xA;[bluetooth]# connect D8:2F:80:B9:15:91&#xA;Attempting to connect to D8:2F:80:B9:15:91&#xA;Failed to connect: org.bluez.Error.Failed&#xA;Failed to connect: org.bluez.Error.Failed&#xA;[bluetooth]# connect D8:2F:80:B9:15:91&#xA;Attempting to connect to D8:2F:80:B9:15:91&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I was thinking I would write a workaround script that would automatically remove and re-pair these devices, but the changing address makes that much harder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: &#xA;I have bluez version &lt;code&gt;5.50-0ubuntu0ppa1&lt;/code&gt; from the &lt;code&gt;ppa:bluetooth/bluez&lt;/code&gt; repository.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2020-04-15T16:36:36.223" LastActivityDate="2023-12-30T06:02:25.257" Title="Bluetooth keyboard and mouse frequently stops reconnecting" Tags="|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24119" PostTypeId="1" CreationDate="2020-04-15T16:17:58.970" Score="0" ViewCount="633" Body="&lt;p&gt;So, I've figured that I can set up any shortcut to open my terminal and currently I use cmd+enter to start it, it is very convenient and helps greatly when I need quick access to terminal. &#xA;BUT when I need to open up another terminal with the same shortcut -&gt; I can't do so.&#xA;So, I have to go to the recently opened terminal (which could be located on 2nd or 3rd screen for example), and hit ctrl+shift+n to open up another one. Takes time. Inconvenient. Any setting I can input to override default &quot;One and Only one terminal at one hands&quot; policy? &lt;/p&gt;&#xA;" OwnerUserId="22464" LastActivityDate="2022-07-24T17:08:40.810" Title="How do I open second terminal with the same shortcut? Is there a setting for it?" Tags="|keyboard-shortcuts|pantheon-terminal|" AnswerCount="5" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24120" PostTypeId="2" ParentId="24119" CreationDate="2020-04-15T20:37:34.660" Score="0" Body="&lt;p&gt;I've tried to replicate what you are saying and yes, I can't open another terminal window through the key shortcut if the terminal is already open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, instead of looking for the open terminal window among the screens, both physical or virtual you have, to save some time and make this thing less complex, you could just right click on the terminal icon in plank and select new window.&#xA;Plank appears in every virtual desktop you create&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know if this helps&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-15T20:37:34.660" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24121" PostTypeId="2" ParentId="23968" CreationDate="2020-04-15T20:49:11.090" Score="0" Body="&lt;p&gt;this is because you probably need proprietary drivers for your wifi card.&#xA;But, before proceeding, is your wifi card detected from the system? Could you please report the result of lshw?&#xA;It would be very helpful to solve your issue, because every wifi card is a different story, thus knowing the exact model would slice the problem&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway, if the wifi card was ever detected, in the installed section of the app store, the store itself should be proposing you to install proprietary drivers&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-15T20:49:11.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24122" PostTypeId="2" ParentId="23959" CreationDate="2020-04-15T20:54:28.770" Score="2" Body="&lt;p&gt;actually, at least in my case, selecting &quot;Prefer dark variant&quot; under the &quot;Appearence&quot; tab of Elementary-tweaks works globally for every application&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You just need to install elementary tweaks as explained here - see &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for installation instructions&lt;/p&gt;&#xA;&#xA;&lt;p&gt;See a screenshot taken a while ago&lt;a href=&quot;https://i.stack.imgur.com/WGfW5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WGfW5.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-04-15T20:54:28.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24124" PostTypeId="1" CreationDate="2020-04-16T02:21:50.913" Score="0" ViewCount="14" Body="&lt;p&gt;I'm not sure what I did, but all of the icons in Files are huge now and I can't find a solution on how to make them back to default size. Apologies for the likely stupid question, but I can't find anything online about it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for your help. &lt;/p&gt;&#xA;" OwnerUserId="22470" LastActivityDate="2020-04-16T02:36:42.093" Title="Icons in Files are huge now and I can't figure out how to make them default size again" Tags="|icons|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24125" PostTypeId="2" ParentId="24124" CreationDate="2020-04-16T02:34:03.250" Score="1" Body="&lt;p&gt;One possible solution:&#xA;Hold down the &lt;kbd&gt;Ctrl&lt;/kbd&gt; key and using your mouse wheel.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-04-16T02:34:03.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24130" PostTypeId="1" CreationDate="2020-04-16T08:29:41.770" Score="1" ViewCount="249" Body="&lt;p&gt;Is it possible to install Latest Legacy GPU version (304.xx series): 304.137 nvidia driver on elementary 5.1? On Freya it was possible but no such luck here on Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have the old GPU: &lt;code&gt;NVIDIA Corporation C61 [GeForce 7025 / nForce 630a]&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since Elementary OS 5.1.3 Hera is based on Ubuntu 18.04.3 LTS I heard that there is a patched version for the &lt;code&gt;NVIDIA-Linux-x86_64-304.137.run&lt;/code&gt; driver but I tried the option and still got an error (unable to build kernel module) from nvidia prompt.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2020-04-16T08:29:41.770" Title="Install nvidia-legacy 304.137 driver on Elementary OS Hera" Tags="|drivers|nvidia|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24132" PostTypeId="1" CreationDate="2020-04-16T09:33:27.507" Score="0" ViewCount="57" Body="&lt;p&gt;I'm using EOS on a daily basis (with Win on dualboot) and I spend hours on skype for my job. The problem is my wifi signal is really unstable, even if I'm sitting at 3 meters from my internet box. I generally get around 100Mbps but Several time a day my internet reception go down to less than 1MBP. Btw, my box is sending around 600Mbps... &#xA;When I go behind a wall, I get nothing at all... &#xA;With windows, I don't have thos problems... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;iwconfig : &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;enp1s0    no wireless extensions.&#xA;&#xA;wlp2s0    IEEE 802.11  ESSID:&quot;moimoimoi&quot;  &#xA;          Mode:Managed  Frequency:5.56 GHz  Access Point: C6:B4:22:73:FD:9F   &#xA;          Bit Rate=433.3 Mb/s   Tx-Power=26 dBm   &#xA;          Retry short limit:7   RTS thr=2347 B   Fragment thr:off&#xA;          Power Management:off&#xA;          Link Quality=66/70  Signal level=-44 dBm  &#xA;          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0&#xA;          Tx excessive retries:0  Invalid misc:1754   Missed beacon:0&#xA;&#xA;lo        no wireless extensions.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22474" LastActivityDate="2020-04-16T16:42:25.373" Title="Weak and unstable wifi" Tags="|wifi|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24133" PostTypeId="1" AcceptedAnswerId="24214" CreationDate="2020-04-16T10:37:59.853" Score="0" ViewCount="339" Body="&lt;p&gt;The AppCenter has problems updating. This type of error appears multiple times here, but I think they're all a bit different? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I get the following notice: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://download.opensuse.org/repositories/network:/messaging:/xmpp:/dino/xUbuntu_18.04  InRelease: The following signatures were invalid: EXPKEYSIG 62EB1A0917280DDF network OBS Project &amp;lt;network@build.opensuse.org&amp;gt;&#xA;E: http://download.opensuse.org/repositories/network:/messaging:/xmpp:/dino/xUbuntu_18.04  InRelease is not (yet) available (The following signatures were invalid: EXPKEYSIG 62EB1A0917280DDF network OBS Project&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This seems more specific than the other questions. Can anybody tell me what went wrong (and how to fix it)?&lt;/p&gt;&#xA;" OwnerUserId="16507" LastActivityDate="2020-04-22T12:37:55.990" Title="An error occurred during the signature verification" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24136" PostTypeId="1" AcceptedAnswerId="24269" CreationDate="2020-04-16T14:33:48.230" Score="0" ViewCount="344" Body="&lt;p&gt;I connected my speakers to 3.5mm port in the back of my pc(on the motherboard) and OS doesn't detect them. I went to &quot;Sound&quot; settings and there were only my headphones and HDMI output because my monitor has speakers.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that I just installed Elementary OS today and haven't played around with drivers or anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How do I detect my newly connected speakers?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using Hera 5.1.3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="22471" LastEditorUserId="15904" LastEditDate="2020-04-17T11:48:51.907" LastActivityDate="2020-04-25T11:29:28.323" Title="Elementary OS Hera not detecting my speakers" Tags="|release-hera|audio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24137" PostTypeId="2" ParentId="24136" CreationDate="2020-04-16T14:42:42.557" Score="0" Body="&lt;p&gt;The may be detected, but muted on the system.&#xA;You may check this question and its answer, it may help your problem: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24008/low-audio-volume-elementary-os-5-1-3-hera/24009#24009&quot;&gt;Low Audio Volume Elementary OS 5.1.3 Hera&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-04-16T14:42:42.557" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24138" PostTypeId="1" CreationDate="2020-04-16T16:37:21.863" Score="0" ViewCount="266" Body="&lt;p&gt;so as the title says i have an executable files wich if i run into the terminal typing ./FILENAME it starts but when double-clicking on it in files it prompts me with a windows asking to search an application to open the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now in ubuntu executable files are reprrsented by a pink rhombus, and double cliking on them is usually enough, but how can i run within files  in elementary os? Appending a .bin extension may do the trick or what?&lt;/p&gt;&#xA;" OwnerUserId="22477" LastActivityDate="2024-01-27T23:03:15.333" Title="run executable linux file without extension in elementary os" Tags="|pantheon-files|applications|files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24139" PostTypeId="2" ParentId="24132" CreationDate="2020-04-16T16:42:25.373" Score="2" Body="&lt;p&gt;not sure if this would help but try to boot from a usb using &quot;try elementary&quot; and install skype and check if this issue occured&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2020-04-16T16:42:25.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24141" PostTypeId="2" ParentId="24138" CreationDate="2020-04-16T16:53:56.700" Score="0" Body="&lt;p&gt;Actually it's the &lt;a href=&quot;https://openxcom.org/forum/index.php/topic,5258.0.html?PHPSESSID=5hb49op3k2cl96cpc0t7n0gint&quot; rel=&quot;nofollow noreferrer&quot;&gt;openxcom extended executable&lt;/a&gt;, in plank i strangely got an icon, see the image:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MYI0O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MYI0O.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I just may make a .desktop file, namely a launcher, or there is a more straightforward way?&lt;/p&gt;&#xA;" OwnerUserId="22477" LastActivityDate="2020-04-16T16:53:56.700" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24145" PostTypeId="1" AcceptedAnswerId="24272" CreationDate="2020-04-17T10:48:29.163" Score="0" ViewCount="40" Body="&lt;p&gt;I know how to tell Files what application to open when I double-click a document. But what I need is to tell it what arguments to always use when opening that kind of document. Can I do that?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example. I'm using MPV as my audio player. When I double-click a mp3 in Files, it plays the file with an opened window (that's the default behaviour from MPV). So, if I want to play an audio file with no GUI, I need to use the argument &lt;code&gt;no-video&lt;/code&gt;. My question is how can I pass the argument to Files? And only for audio file types?&lt;/p&gt;&#xA;" OwnerUserId="21122" LastActivityDate="2020-04-25T13:29:14.233" Title="Passing arguments to an “Open With” application in Files" Tags="|release-hera|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24147" PostTypeId="1" CreationDate="2020-04-17T13:41:16.010" Score="1" ViewCount="191" Body="&lt;p&gt;I'm having problems trying to boot to the ISO of Elementary OS from my USB.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before everything, this is the machine i'm trying to install elementary os on&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mother: Gigabyte H310M H 2.0&#xA;Proccesor: Intel Core i3 9100F&#xA;RAM: 8GB Ram 2400mhz&#xA;GPU: Nvidia Geforce GTX 1050 3Gb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem comes when i try to boot the system from the USB to actually install it on the HD. I can see the logo from Elementary saying 'Booting Elementary OS live in ... Seconds' then, the screen goes blue for my monitor with a 'Invalid Format' message moving arround.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;BIOS settings are as follow: Fast Boot OFF, UEFI ON, And the 'Initial Display Input' is set to the PCIe slot which is the one who has plugged the GTX 1050 (No other option aside from the PCIe slot btw, &lt;strong&gt;the processor doesn't have an integrated GPU&lt;/strong&gt;).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It's not the first Linux which i'm having problems to install, it's the second and has the exactly same problem as the first one. Boot &gt; Booting to ... &gt; Invalid Format.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;One thing that i think is interesting mentioning is that, my father has a G4560 Processor which &lt;strong&gt;has&lt;/strong&gt; an integrated GPU and a GTX 1050 2GB. When i was trying to install the other system, i though that maybe my processor doesn't having an integrated gpu may be causing trouble, so i take my HD to my father's PC, plugged it in and tried to install from there and guess what? Same format problem (My father has a different monitor than mine, his only went black screen like flashing so, no monitors problems for now). All of this with the GTX 1050 plugged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So then, i've tried removing the GTX 1050 from my dad's PC and trying to boot from the G4560 integrated gpu. And &lt;strong&gt;it booted fine without problems&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &#xA;&lt;em&gt;Aside from installing the system from my dad's PC which obviously isn't and option&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="22488" LastEditorUserId="15904" LastEditDate="2020-04-30T14:24:06.107" LastActivityDate="2024-01-11T08:05:25.683" Title="I need help booting Elementary OS Hera 5.1.3" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24148" PostTypeId="1" AcceptedAnswerId="24437" CreationDate="2020-04-17T14:42:44.470" Score="1" ViewCount="75" Body="&lt;p&gt;My company uses &lt;a href=&quot;https://aws.amazon.com/workspaces/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Amazon Workspaces&lt;/a&gt; to support remote access to our network.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran the client without a hitch on Ubuntu 19.10/20.04 but I just switched to Elementary and now I can't get the application to recognize the Ctrl key when it's pressed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is rather critical for everything from bringing up the start menu (Ctrl+Esc) to navigating the UNIX command line through ssh / PuTTY.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd initially thought the operating system was swallowing Ctrl, but running 'showkey' inside Terminal shows that's clearly not the case (I hit Ctrl 3 times. It seems Ctrl is keycode 29)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;feoh@yamato:~$ sudo showkey&#xA;kb mode was ?UNKNOWN?&#xA;[ if you are trying this under X, it might not work&#xA;since the X server is also reading /dev/console ]&#xA;&#xA;press any key (program terminates 10s after last keypress)...&#xA;keycode  28 release&#xA;keycode  29 press&#xA;keycode  29 release&#xA;keycode  29 press&#xA;keycode  29 release&#xA;keycode  29 press&#xA;keycode  29 release&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  29 press&#xA;keycode  46 press&#xA;^Ccaught signal 2, cleaning up...&#xA;feoh@yamato:~$ &#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've fallen in love with Elementary :)&lt;/p&gt;&#xA;" OwnerUserId="22486" LastEditorUserId="22486" LastEditDate="2020-04-17T15:31:51.653" LastActivityDate="2020-05-06T03:37:46.047" Title="How do I pass the Ctrl-key through to an application? Elementary seems to be swallowing it" Tags="|applications|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24149" PostTypeId="2" ParentId="11772" CreationDate="2020-04-17T14:56:39.703" Score="0" Body="&lt;p&gt;I'm new here but this doesn't sound like any kind of purposeful feature on the part of the developers to me. I'd report &lt;a href=&quot;https://github.com/elementary/terminal/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue&lt;/a&gt; on the Github repository, including as much scathing detail as you possibly can about what's happening and how you got here.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-17T14:56:39.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24150" PostTypeId="2" ParentId="24147" CreationDate="2020-04-17T15:03:19.567" Score="0" Body="&lt;p&gt;This could be a problem with the format of grub.conf.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What happens when you flip to a virtual console using Ctrl+Alt+F1?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you see a more useful error message when you do that?&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-17T15:03:19.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24151" PostTypeId="1" CreationDate="2020-04-17T16:36:18.443" Score="2" ViewCount="403" Body="&lt;p&gt;My PC - &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Processor: Intel(R) Core(TM) i5-6600K CPU @ 3.50GHz (4 CPUs), ~3.5GHz&#xA;Memory: 16384MB RAM&#xA;Video Card name: Radeon RX 580 Series&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded elementaryos-5.1-stable.20200405.iso and Rufus 3.9&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Followed instructions to the letter, including the checksum hash.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When booting from the USB, all I get is a blank screen. No error messages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="22490" LastActivityDate="2024-01-19T19:05:10.603" Title="Can't boot from USB" Tags="|system-installation|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24154" PostTypeId="1" CreationDate="2020-04-17T22:07:45.293" Score="1" ViewCount="30" Body="&lt;p&gt;system freezes while trying to create ext4 on the / partition.  It says it is preparing the drive and then sits there indefinitely.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;HISTORY OF THE TROUBLE&#xA;on first install attempt, could not mount vfat volume on uefi partition.  My bios is set to legacy boot.  So I erased the partition it had set up as uefi.  Same problem.  When I chose either option of &quot;go back&quot; or &quot;continue&quot; it simply sits there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then I tried simply letting it do the work by choosing the option to install it along side my LinuxMint distro.  It got past the uefi error but would start to format my / partition and hang there.  I gave it an hour and still was sitting there with no progress.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a ROG STRIX B450 motherboard with an AMD Ryzen 5 3600 cpu.  1.5 TB disk space and 16gb ram.&lt;/p&gt;&#xA;" OwnerUserId="22493" LastActivityDate="2020-04-17T22:07:45.293" Title="Will not install" Tags="|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24158" PostTypeId="1" CreationDate="2020-04-18T10:02:22.677" Score="0" ViewCount="43" Body="&lt;p&gt;I want to report a very weird thing I've noted on my laptop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Basically, I set the volume to, let's say, max level because I'm watching a movie. Then I pause the movie, and get away from the pc for the time needed for the lock screen to activate.&#xA;I unlock the session and the volume is at 20% or 30%.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How is that possible that the audio volume level changes during lock screen without touching anything?&lt;/p&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-05-07T21:11:58.783" Title="Audio volume lowered after lock screen" Tags="|release-hera|greeter|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24159" PostTypeId="1" CreationDate="2020-04-18T10:45:38.040" Score="0" ViewCount="616" Body="&lt;p&gt;Is there any driver for Thinkpad T480s fingerprint reader?&#xA;I have already tried Figerprint GUI and fprint-demo but without succes.&lt;/p&gt;&#xA;" OwnerUserId="18059" LastActivityDate="2024-02-17T19:01:50.220" Title="Fingerprint reader driver thinkpad T480s" Tags="|drivers|thinkpad|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24163" PostTypeId="1" CreationDate="2020-04-18T16:42:56.730" Score="1" ViewCount="419" Body="&lt;p&gt;hope you are doing well.&#xA;Elementay os just make to login screen where mouse and keyboard doesn't work but the text area for the password is flashing and after some second it stop, so I'm guessing it freeze and I'm forced to hard reboot (rebooting doesn't fix the issue, it's just the only thing I can do from there).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to make the video driver load after boot time adding &quot;nomodeset&quot; to the grub and disabling csm as founded somewhere on the web but still nothing.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried even a different keyboard but both of them work on windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have you ever encountered a similar issue? if not any advice/log that i can look at to try to understand what's going on?&#xA;Booting to advanced mode I'm able to access a shell but not internet, dunno why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've event tried to reinstall the whole thing but the thumb drive I've used after showing elementary logo go black.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope in the community.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="22509" LastEditorUserId="15904" LastEditDate="2020-04-30T14:23:38.327" LastActivityDate="2024-01-11T09:01:00.153" Title="Freeze on login screen" Tags="|release-hera|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24166" PostTypeId="2" ParentId="24118" CreationDate="2020-04-18T21:39:35.220" Score="0" Body="&lt;p&gt;I think I solved this when I tried fixing another issue: my Bluetooth headphones kept connecting in low fidelity mode. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;First a note, some tips adapt &lt;code&gt;/etc/bluetooth/audio.conf&lt;/code&gt;, but since Ubuntu 16.04+ (elementary 0.4 Loki) you actually need to edit &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I changed &lt;code&gt;/etc/bluetooth/main.conf&lt;/code&gt; to just contain:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[General]&#xA;Enable=Source,Sink,Media,Socket&#xA;AutoConnect=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Following this advice: &lt;a href=&quot;https://jabriffa.wordpress.com/2019/04/29/fixing-bluetooth-headset-playback-profile-on-ubuntu-18-04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://jabriffa.wordpress.com/2019/04/29/fixing-bluetooth-headset-playback-profile-on-ubuntu-18-04-lts/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I then noticed that &lt;code&gt;sudo service bluetooth restart&lt;/code&gt; wasn't enough, I needed to restart. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since I did that both my issues have been fixed.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2020-04-18T21:39:35.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24168" PostTypeId="2" ParentId="18121" CreationDate="2020-04-19T04:36:44.567" Score="0" Body="&lt;p&gt;I use 5.1.3 Hera which pre-installed IBus (IBus preference panel can be found in System Settings &gt; Keyboard &gt; Layout &gt; Input Method Settings). &#xA;dragon2fly's answer solves my problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just select IBus in 'im-config', restart, and it works.&lt;/p&gt;&#xA;" OwnerUserId="22500" LastActivityDate="2020-04-19T04:36:44.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24174" PostTypeId="1" CreationDate="2020-04-20T03:02:48.520" Score="0" ViewCount="171" Body="&lt;p&gt;From the GUI, I can login with admin account. I cannot login with standard user account. The model does a little shake and cursor refocuses in password textbox. I have tried resetting password in case of typo but doesn't help. I can login with standard user from terminal ctrl/alt/f1 and access files etc BUT not using GUI??? So i know im using correct password!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can login with admin account from GUI and terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Have tried reconfiguring lightdm&#xA;Makes no difference&lt;/p&gt;&#xA;" OwnerUserId="22529" LastActivityDate="2024-03-20T09:05:40.687" Title="unable to login using standard user from GUI in elementary 5.1.3 hera" Tags="|release-hera|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24176" PostTypeId="2" ParentId="17067" CreationDate="2020-04-20T07:05:53.043" Score="0" Body="&lt;p&gt;I am using the rad tool &quot;Lazarus&quot; and I experienced the context menu popping up automatically(!) when I compile with gtk3 widget set. Using the default widget set there is no context menu.&lt;br&gt;&#xA;Unfortunately I cannot use gtk3  constantly because some of my widgets/components are then messed up.&lt;/p&gt;&#xA;" OwnerUserId="22531" LastActivityDate="2020-04-20T07:05:53.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24177" PostTypeId="1" AcceptedAnswerId="24181" CreationDate="2020-04-20T07:18:04.863" Score="1" ViewCount="73" Body="&lt;p&gt;Is there any &quot;native&quot; Elementary OS graphical utility to manage system services/daemons? I mean easy and nice tool to start, stop, enable, disable, check status of a webserver, MySQL server, sshd and so on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched, but I have found only some deb packages outside regular EOS repository, which I am not sure should integrate well and shouldn't spoil the system(d) ;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;TYIA,&#xA;Piotr&lt;/p&gt;&#xA;" OwnerUserId="22532" LastActivityDate="2020-04-20T11:01:14.367" Title="GUI for managing system services - is there any?" Tags="|system|gui-toolkits|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24178" PostTypeId="1" CreationDate="2020-04-20T07:19:59.237" Score="1" ViewCount="853" Body="&lt;p&gt;In Elementary OS 5.1 Hera the native terminal has three &amp;quot;profiles&amp;quot; (is it really profiles?): &lt;em&gt;Dark&lt;/em&gt;, &lt;em&gt;High Contrast&lt;/em&gt;, &lt;em&gt;Solarized Light&lt;/em&gt;. Ideally I would like to add a new profile &amp;quot;Nord&amp;quot; which uses the &lt;a href=&quot;https://github.com/arcticicestudio/nord&quot; rel=&quot;nofollow noreferrer&quot;&gt;nord palette&lt;/a&gt; or if it's not possible to change only the &lt;em&gt;Dark&lt;/em&gt; profile accordingly. Is it possible? If so how to achieve it properly?&lt;/p&gt;&#xA;&lt;p&gt;UPDATE: So far I was able to change palette via &lt;em&gt;dconf Editor&lt;/em&gt; by setting it to &lt;code&gt;#3b4252:#bf616a:#a3be8c:#ebcb8b:#81a1c1:#b48ead:#88c0d0:#e5e9f0:#4c566a:#bf616a:#a3be8c:#ebcb8b:#81a1c1:#b48ead:#8fbcbb:#eceff4&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I also changed foreground/background to &lt;code&gt;#d8dee9&lt;/code&gt; and &lt;code&gt;rgba(46,52,64,0.95)&lt;/code&gt; respectively.&#xA;The problem with the approach is as soon as I switch from &lt;em&gt;Dark&lt;/em&gt; to &lt;em&gt;Solirized Light&lt;/em&gt; and go back to &lt;em&gt;Dark&lt;/em&gt; my custom defined foreground/background colors return to defaults. So the question is: Is it possible to preserve my custom defined colors for &lt;em&gt;Dark&lt;/em&gt; mode?&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-05-29T19:30:11.407" Title="How to customize terminal palette" Tags="|settings|pantheon-terminal|themes|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24181" PostTypeId="2" ParentId="24177" CreationDate="2020-04-20T10:19:24.183" Score="1" Body="&lt;p&gt;While not official, this might work for you&#xA;&lt;a href=&quot;https://github.com/Dirli/switchboard-plug-services&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Dirli/switchboard-plug-services&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Integrated into system settings&lt;/p&gt;&#xA;" OwnerUserId="22513" LastActivityDate="2020-04-20T10:19:24.183" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24182" PostTypeId="1" CreationDate="2020-04-20T10:51:59.677" Score="0" ViewCount="180" Body="&lt;p&gt;A couple Days ago my fresh eOS install stopped reacting at all when pressing power-off or reboot.&lt;/p&gt;&#xA;&lt;p&gt;Shutting down works when not logged in or being logged into the guest account.&#xA;I cannot figure out why that is, I suppose it has something to do with the removal of xscreensaver but im not sure.&lt;/p&gt;&#xA;&lt;p&gt;Can someone please assist me in that case?&lt;/p&gt;&#xA;&lt;p&gt;What I already did:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;editing grub to &lt;code&gt;acpi=force&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;changing the poweroff delay force from 90seconds to 6 seconds&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;None of that helped.&lt;/p&gt;&#xA;&lt;p&gt;I have suspected installs:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;timeshift for backups&lt;/li&gt;&#xA;&lt;li&gt;kde-connect&lt;/li&gt;&#xA;&lt;li&gt;additional taskbar that shows minimized programs&lt;/li&gt;&#xA;&lt;li&gt;wingpanel-indicator-ayatana&lt;/li&gt;&#xA;&lt;li&gt;xscreensaver (removed)&lt;/li&gt;&#xA;&lt;li&gt;caffeine (removed)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;How do I log the shutdown sequence? That would help a lot.&lt;/p&gt;&#xA;&lt;p&gt;Ordering &lt;code&gt;shutdown -h&lt;/code&gt; in terminal works but that is no long-time option.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;EDIT:&#xA;&lt;code&gt;sudo wingpanel&lt;/code&gt; after the problem occurred, reenables the shutdown option. Locking results in Error message:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;(wingpanel:4084): wingpanel-WARNING **: 15:20:26.624: SessionManager.vala:60: Error registering client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files&lt;/p&gt;&#xA;&lt;p&gt;(wingpanel:4084): wingpanel-WARNING **: 15:20:26.624: Wingpanel.vala:53: Failed to register with Session manager&lt;/p&gt;&#xA;&lt;p&gt;** (wingpanel:4084): WARNING **: 15:20:56.026: Indicator.vala:163: Unable to lock: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: \n The name org.freedesktop.ScreenSaver was not provided by any .service files&lt;/p&gt;&#xA;&lt;p&gt;** (wingpanel:4084): CRITICAL **: 15:20:40.286: DisplayWidget.vala:159: Unknown network state, cannot show the good icon: NETWORK_STATE_FAILED_WIRED&lt;/p&gt;&#xA;&lt;p&gt;** (wingpanel:4084): CRITICAL **: 15:20:54.846: session_widgets_userbox_update_state: assertion 'self != NULL' failed&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;EDIT2:&lt;/p&gt;&#xA;&lt;p&gt;reinstalling wingpanel from pantheon updated the error messages:&lt;/p&gt;&#xA;&lt;p&gt;When trying to Suspend or Shutdown:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;Unable to shutdown: GDBus.Error:System.Error.ESTALE: Stale file handle&lt;/code&gt;&#xA;&lt;code&gt;Indicator.vala:151: Unable to suspend: GDBus.Error:System.Error.ESTALE: Stale file handle&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;i just opened a bug report at github:&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel/issues/320&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/issues/320&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22512" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-06-01T07:59:37.263" Title="Hera 5.1.3 Doesn't shut down or reboot" Tags="|release-hera|wingpanel|shutdown|" AnswerCount="1" CommentCount="0" ClosedDate="2020-06-01T08:06:47.030" ContentLicense="CC BY-SA 4.0" />
  <row Id="24184" PostTypeId="2" ParentId="24174" CreationDate="2020-04-20T11:04:37.467" Score="0" Body="&lt;p&gt;Try removing the password from terminal and logging in without entering a password from GUI.&lt;/p&gt;&#xA;" OwnerUserId="22512" LastActivityDate="2020-04-20T11:04:37.467" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24186" PostTypeId="2" ParentId="16502" CreationDate="2020-04-20T13:21:50.677" Score="1" Body="&lt;p&gt;Looks like @szx is wondering how to remove space between the icons. I hope it's okay to answer that, here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a file &lt;strong&gt;~/.config/gtk-3.0/gtk.css&lt;/strong&gt; &#xA;Put this text in it:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/* source: https://github.com/mdh34/elementary-indicators/issues/1 */&#xA;.composited-indicator {&#xA;    padding: 0 2px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Logout, then back in.&lt;/p&gt;&#xA;" OwnerUserId="22539" LastActivityDate="2020-04-20T13:21:50.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24189" PostTypeId="2" ParentId="24178" CreationDate="2020-04-20T20:23:02.753" Score="1" Body="&lt;p&gt;I'd commented on this but I'm actually going to answer. It's not possible to preserve your custom palette changes made with dconf editor when switching themes that I'm aware of.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-20T20:23:02.753" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24190" PostTypeId="1" CreationDate="2020-04-20T21:48:13.047" Score="0" ViewCount="61" Body="&lt;p&gt;I've used ElementaryOS for quite a while without a single glitch, but just recently I've noticed that my Focusrite Sapphire PRO 14 doesn't work anymore.&lt;br&gt;&#xA;When the system boot I can see the FW (firewire) led blink for a few instants and then it turns off.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried a little bit of everything but nothing seems to work.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;One very curious fact is that Zoom (Videochat app) seems to be able to wake up the hardware (FW led on) and I'm able to use the audio card (just in zoom).&lt;br&gt;&#xA;The other audio card works well (motherboard's audio card).&lt;br&gt;&#xA;On Windows 10 everything works perfectly, I guess it's a driver or misconfiguration issue.&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lspci -knnvvv&#xA;...&#xA;20:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments XIO2213A/B/XIO2221 IEEE-1394b OHCI Controller [Cheetah Express] [104c:823f] (rev 01) (prog-if 10 [OHCI])&#xA;    Subsystem: Device [3412:7856]&#xA;    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-&#xA;    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium &amp;gt;TAbort- &amp;lt;TAbort- &amp;lt;MAbort- &amp;gt;SERR- &amp;lt;PERR- INTx-&#xA;    Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes&#xA;    Interrupt: pin A routed to IRQ 36&#xA;    Region 0: Memory at f7204000 (32-bit, non-prefetchable) [size=2K]&#xA;    Region 1: Memory at f7200000 (32-bit, non-prefetchable) [size=16K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: firewire_ohci&#xA;    Kernel modules: firewire_ohci&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lsmod | grep firewire                &#xA;snd_firewire_lib       40960  1 snd_dice&#xA;snd_rawmidi            36864  4 snd_seq_midi,snd_firewire_lib,snd_usbmidi_lib,snd_dice&#xA;snd_pcm               102400  7 snd_hda_codec_hdmi,snd_hda_intel,snd_firewire_lib,snd_usb_audio,snd_hda_codec,snd_hda_core,snd_dice&#xA;firewire_ohci          40960  0&#xA;firewire_core          65536  3 snd_firewire_lib,firewire_ohci,snd_dice&#xA;crc_itu_t              16384  1 firewire_core&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ dmesg | grep -i firewire &#xA;[    1.069283] firewire_ohci 0000:20:00.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    1.128106] firewire_ohci 0000:20:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2&#xA;[    1.656201] firewire_core 0000:20:00.0: created device fw0: GUID 7856341278563412, S800&#xA;[    1.656206] firewire_core 0000:20:00.0: phy config: new root=ffc1, gap_count=5&#xA;[    6.894652] firewire_core 0000:20:00.0: created device fw1: GUID 00130e0402402b92, S400&#xA;[ 4589.883946] Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc iptable_filter bpfilter aufs overlay binfmt_misc nls_iso8859_1 nvidia_uvm(OE) nvidia_drm(POE) nvidia_modeset(POE) nvidia(POE) snd_usb_audio snd_usbmidi_lib drm_kms_helper uvcvideo drm videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc ipmi_devintf snd_hda_codec_hdmi ipmi_msghandler snd_hda_codec_realtek fb_sys_fops edac_mce_amd syscopyarea sysfillrect sysimgblt joydev input_leds snd_hda_codec_generic ledtrig_audio kvm_amd snd_hda_intel snd_intel_nhlt snd_hda_codec snd_hda_core snd_dice snd_firewire_lib snd_seq_midi snd_seq_midi_event kvm snd_rawmidi snd_hwdep snd_seq irqbypass snd_pcm snd_seq_device snd_timer crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 k10temp snd ccp soundcore crypto_simd cryptd eeepc_wmi wmi_bmof asus_wmi&#xA;[ 4589.883986]  mac_hid sparse_keymap video glue_helper sch_fq_codel nfsd parport_pc ppdev auth_rpcgss nfs_acl lockd lp grace parport sunrpc ip_tables x_tables autofs4 btrfs xor zstd_compress raid6_pq libcrc32c dm_mirror dm_region_hash dm_log hid_logitech_hidpp hid_logitech_dj hid_generic usbhid hid igb firewire_ohci firewire_core i2c_piix4 dca nvme crc_itu_t i2c_algo_bit ahci libahci nvme_core wmi gpio_amdpt gpio_generic&#xA;[ 4591.279078] firewire_core 0000:20:00.0: rediscovered device fw0&#xA;[ 4591.279081] firewire_core 0000:20:00.0: phy config: new root=ffc1, gap_count=5&#xA;[ 4596.509583] firewire_core 0000:20:00.0: created device fw1: GUID 00130e0402402b92, S400&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;" OwnerUserId="22545" LastActivityDate="2024-01-03T06:06:30.750" Title="Focusrite Sapphire PRO 14 - Firewire card doesn't work after update" Tags="|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24193" PostTypeId="1" AcceptedAnswerId="24204" CreationDate="2020-04-21T03:59:16.577" Score="0" ViewCount="86" Body="&lt;p&gt;There's a feature in elementary that depending on your background being light, switches the font to dark and removes the text-shadow, this seems to reset upon (re-)boot and you have to apply the same wallpaper again to get the proper dark text back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a known solution? note that I freshly installed today: elementary OS 5.1.3 Hera and updated all it offered.&lt;/p&gt;&#xA;" OwnerUserId="22551" LastEditorUserId="15904" LastEditDate="2020-04-22T01:41:05.327" LastActivityDate="2020-04-22T01:41:05.327" Title="Wingpanel adds shadow and defaults to white font after restart on light background" Tags="|release-hera|wingpanel|wallpaper|bugs|text|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24196" PostTypeId="1" CreationDate="2020-04-21T10:19:38.557" Score="0" ViewCount="49" Body="&lt;p&gt;since a little while (perhaps a week or two, three maybe) my notification don't disappear if I go to the app that caused the notification. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: I enter &lt;code&gt;sleep 10 ; echo 'hallo'&lt;/code&gt; in a terminal and go and do something else. After 10s there will be a notification &lt;code&gt;Task finished&lt;/code&gt;. If I now go to the terminal, it used to be that the notification disappeared, but now the notification remains. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Did I accidentially change something in my setup? Or is there some other way this can happen?&lt;/p&gt;&#xA;" OwnerUserId="16507" LastActivityDate="2024-01-15T09:02:30.327" Title="notification does not get feedback from apps" Tags="|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24197" PostTypeId="1" CreationDate="2020-04-21T10:24:10.123" Score="0" ViewCount="25" Body="&lt;p&gt;I'm trying to create a contractor that duplicate a file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[Contractor Entry]&#xA;Name=Duplicate File&#xA;Icon=File&#xA;Description=Duplicate file...&#xA;MimeType=application/octet-stream;application/binary&#xA;Exec=cp %f %f_copy&#xA;Gettext-Domain=file&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But no way to work.&lt;/p&gt;&#xA;" OwnerUserId="21122" LastActivityDate="2020-04-21T10:24:10.123" Title="How to add a duplicate to right-click menu in Files via contractor entry" Tags="|release-hera|pantheon-files|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24198" PostTypeId="1" CreationDate="2020-04-21T10:25:07.580" Score="0" ViewCount="143" Body="&lt;p&gt;I wanted to install elementary OS Hera, but failed numerous times. I get the &quot;errno 5 input/output&quot; error during installation. I searched through forums and what not and tried everything they mentioned:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;1. Flashing ISO &amp;amp; DD both;&lt;/strong&gt;&#xA;&lt;strong&gt;2. Checking for damaged sectors (none);&lt;/strong&gt;&#xA;&lt;strong&gt;3. Using Ext4 &amp;amp; Ext3 both;&lt;/strong&gt;&#xA;&lt;strong&gt;4. Installing directly and through &quot;Try Elementary&quot;;&lt;/strong&gt;&#xA;&lt;strong&gt;5. Checking HASH in rufus (it's the same);&lt;/strong&gt;&#xA;&lt;strong&gt;6. Tried the commands in the terminal&lt;/strong&gt; (ubiquity --no-migration-assistant);&#xA;&lt;strong&gt;7. Testing RAM for problems (none);&lt;/strong&gt;&#xA;&lt;strong&gt;8. Secure boot is off&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe the only thing I haven't tried is installing with a CD. I forgot to mention I am using a 1TB USB flash drive. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a laptop &quot;&lt;em&gt;Toshiba Satellite p50-c-169&lt;/em&gt;&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;PS: NTFS file system + GPT partition&lt;/p&gt;&#xA;" OwnerUserId="22555" LastEditorUserId="15904" LastEditDate="2020-04-30T14:24:12.583" LastActivityDate="2020-05-28T04:10:44.597" Title="Errno 5 input/output error // tried probably everything" Tags="|system-installation|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24199" PostTypeId="1" AcceptedAnswerId="24895" CreationDate="2020-04-21T11:08:53.460" Score="0" ViewCount="466" Body="&lt;p&gt;I have messed with title bar scale set (200) and the screen is not usable anymore. So I have ability to login as recovery mode or from live usb. Can anybody help with terminal code to reset dconf&lt;/p&gt;&#xA;" OwnerUserId="22556" LastActivityDate="2020-06-13T09:41:59.737" Title="dconf reset (recovery mode)" Tags="|dconf|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24201" PostTypeId="2" ParentId="22723" CreationDate="2020-04-21T16:10:32.050" Score="0" Body="&lt;p&gt;I have a new Asus ZenBook (just shipped) with an Intel 9000 series wireless adapter built in, and I had the same problem. I solved it by manually installing the backport of iwlwifi using the advice of &quot;jeremy31&quot; here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1046589/backport-for-iwlwifi&quot;&gt;https://askubuntu.com/questions/1046589/backport-for-iwlwifi&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the first recommended install didn't solve my problem; it was the second step (getting the newer version from Canonical) that actually solved my problem. &lt;/p&gt;&#xA;" OwnerUserId="22559" LastActivityDate="2020-04-21T16:10:32.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24202" PostTypeId="2" ParentId="24083" CreationDate="2020-04-21T16:13:03.493" Score="0" Body="&lt;p&gt;I have a new Asus ZenBook (just shipped) with an Intel 9000 series wireless adapter built in, and I had the same problem. I solved it by manually installing the backport of iwlwifi using the advice of &quot;jeremy31&quot; here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1046589/backport-for-iwlwifi&quot;&gt;https://askubuntu.com/questions/1046589/backport-for-iwlwifi&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Note that the first recommended install didn't solve my problem; it was the second step (getting the newer version from Canonical) that actually solved my problem.&lt;/p&gt;&#xA;" OwnerUserId="22559" LastActivityDate="2020-04-21T16:13:03.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24203" PostTypeId="1" AcceptedAnswerId="24610" CreationDate="2020-04-21T16:17:55.197" Score="0" ViewCount="90" Body="&lt;p&gt;this is an Information Request. If this should be somewhere else, please let me know.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I jsut realised that my MX Master 3 was working out of the box with eOS over the provided dongle. Something that is not working in POP!_OS. Is there something you did or build into eOS for it to work or is this provided from somewhere else? I just wanted to know if there is some knowledge, that could be transfered to other distros.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for taking the time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings, Melf&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-05-18T09:33:33.530" Title="Information: Logitech MX Master 3 working" Tags="|release-juno|drivers|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24204" PostTypeId="2" ParentId="24193" CreationDate="2020-04-21T17:59:02.687" Score="0" Body="&lt;p&gt;For now until that bug is fixed, you can force the light background state in your &lt;code&gt;~/.config/gtk-3.0/gtk.css&lt;/code&gt; - if the file and subfolder does not exist, just create them.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.composited-indicator &amp;gt; revealer label,&#xA;.composited-indicator &amp;gt; revealer image,&#xA;.composited-indicator &amp;gt; revealer spinner,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer label,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer image,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer spinner {&#xA;    color: alpha (#000, 0.65);&#xA;    text-shadow:&#xA;        0 0 2px alpha (#fff, 0.3),&#xA;        0 1px 0 alpha (#fff, 0.25);&#xA;    -gtk-icon-shadow:&#xA;        0 0 2px alpha (#fff, 0.3),&#xA;        0 1px 0 alpha (#fff, 0.25);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you'd want to have light on dark background instead, modify it to be:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.composited-indicator &amp;gt; revealer label,&#xA;.composited-indicator &amp;gt; revealer image,&#xA;.composited-indicator &amp;gt; revealer spinner,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer label,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer image,&#xA;.panel.color-light .composited-indicator &amp;gt; revealer spinner {&#xA;    color: #fff;&#xA;    font-weight: bold;&#xA;    text-shadow:&#xA;        0 0 2px alpha (#000, 0.3),&#xA;        0 1px 2px alpha (#000, 0.6);&#xA;    transition: all 200ms ease-in-out;&#xA;    -gtk-icon-shadow:&#xA;        0 0 2px alpha (#000, 0.3),&#xA;        0 1px 2px alpha (#000, 0.6);&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;The hint at the solution was found on &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/ewrd0r/how_to_make_the_top_panel_transparent_even_in_the/fg6047v/&quot; rel=&quot;nofollow noreferrer&quot;&gt;reddit&lt;/a&gt;, for history sake a quote:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Take a look at this css in wingpanel's source. If you were to copy and&#xA;  paste that into your ~/.config/gtk-3.0/gtk.css, you should be able to&#xA;  override the color of the icons. I've highlighted the part for when&#xA;  the panel is on a light background. If you set the properties to the&#xA;  same values in both sections, the icons should always be those colors&#xA;  (you could copy the values from the first section to the second to&#xA;  always have white icons, or copy the values from the second section to&#xA;  the first to always have black icons). To demonstrate, I made&#xA;  wingpanel have red text and icons.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;The source mentioned is here: &lt;a href=&quot;https://github.com/elementary/wingpanel/blob/master/data/styles/application.css&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel/blob/master/data/styles/application.css&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22551" LastEditorUserId="22551" LastEditDate="2020-04-21T18:04:19.273" LastActivityDate="2020-04-21T18:04:19.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24205" PostTypeId="2" ParentId="22658" CreationDate="2020-04-21T19:03:45.263" Score="1" Body="&lt;p&gt;I'm experiencing the same issue on my laptop. So far, I've found this link on the ubuntu forum (since elementary hera is based on Ubuntu 18.04):&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1038723/slow-recovering-from-lock-screen-ubuntu-18-04&quot;&gt;https://askubuntu.com/questions/1038723/slow-recovering-from-lock-screen-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, found those two bugs registered at Ubuntu's Lauchpad:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1832812&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1832812&lt;/a&gt;&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1774188&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1774188&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &lt;code&gt;joarnalctl -b&lt;/code&gt; right after the unlock screen, I get the following log:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;abr 21 15:57:09 Gnotebook systemd[1]: Stopped Session c3 of user lightdm.&#xA;abr 21 15:57:09 Gnotebook systemd-logind[858]: Removed session c3.&#xA;abr 21 15:57:09 Gnotebook systemd[1]: Stopping User Manager for UID 110...&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopping D-Bus User Message Bus...&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped target Default.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopping Accessibility services bus...&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopping Virtual filesystem service...&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped Accessibility services bus.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped D-Bus User Message Bus.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped Virtual filesystem service.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped target Basic System.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped target Sockets.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed GnuPG cryptographic agent and passphrase cache (access for web browsers).&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed GnuPG cryptographic agent and passphrase cache.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed GnuPG cryptographic agent (ssh-agent emulation).&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed GnuPG network certificate management daemon.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed REST API socket for snapd user session agent.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed GnuPG cryptographic agent and passphrase cache (restricted).&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped target Timers.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Stopped target Paths.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Closed D-Bus User Message Bus Socket.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Reached target Shutdown.&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Starting Exit the Session...&#xA;abr 21 15:57:09 Gnotebook systemd[24408]: Received SIGRTMIN+24 from PID 25227 (kill).&#xA;abr 21 15:57:09 Gnotebook systemd[1]: Stopped User Manager for UID 110.&#xA;**abr 21 15:57:09** Gnotebook systemd[1]: Removed slice User Slice of lightdm.&#xA;abr 21 15:57:15 Gnotebook kernel: amdgpu: [powerplay] VI should always have 2 performance levels&#xA;abr 21 15:57:15 Gnotebook kernel: amdgpu 0000:04:00.0: GPU pci config reset&#xA;abr 21 15:57:23 Gnotebook gsd-color[2202]: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xran&#xA;abr 21 15:57:23 Gnotebook gsd-color[2202]: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xran&#xA;**abr 21 15:57:23** Gnotebook io.elementary.a[7686]: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 16&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Notice the highlighted timestamps: They have 14 seconds of interval, that is roughly the time I spend wating the screen unlock.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now, my hint is that's something about the error messages from the gsd-color bin:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; abr 21 15:57:23 Gnotebook gsd-color[2202]: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xran&#xA;    abr 21 15:57:23 Gnotebook gsd-color[2202]: failed to connect to device: Failed to connect to missing device /org/freedesktop/ColorManager/devices/xran&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But no clue how to fix it. Just giving more info to help others.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Below are my laptop settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4iGA2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4iGA2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22563" LastActivityDate="2020-04-21T19:03:45.263" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24206" PostTypeId="1" CreationDate="2020-04-21T19:14:58.347" Score="0" ViewCount="30" Body="&lt;p&gt;Hello im wanting to get elementary os on a hp stream 11 y0xx the specs are 4gb ram 64 bit processor and a intel celeron n3060 @1.60 ghz and i would like to know how well it will i cant make a demo disc thats why thanks&lt;/p&gt;&#xA;" OwnerUserId="22564" LastActivityDate="2024-01-02T07:01:05.143" Title="help testing hera on hp stream 11 with windows 10" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24207" PostTypeId="2" ParentId="24163" CreationDate="2020-04-21T20:23:15.410" Score="0" Body="&lt;p&gt;Most probably your ISO is corrupted. &#xA;To verify it's integrity run the following command in the terminal, as per the instructions found &lt;a href=&quot;https://elementary.io/en/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sha256sum elementaryos-5.1-stable.20200405.iso&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It should produce the output:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cc46be42a1629069e18ab9a49a62fd36a9402036fb078f085b3151d06c10019b&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If that's not the case, download it again, preferably the torrent version.&lt;/p&gt;&#xA;" OwnerUserId="22565" LastActivityDate="2020-04-21T20:23:15.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24208" PostTypeId="2" ParentId="24206" CreationDate="2020-04-21T20:37:27.837" Score="0" Body="&lt;p&gt;In any case you have to create a bootable USB stick or DVDR(W) to install it, which loads a live session where you can check how everything works and then you get to install it if you wish.&lt;/p&gt;&#xA;" OwnerUserId="22565" LastActivityDate="2020-04-21T20:37:27.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24212" PostTypeId="1" CreationDate="2020-04-22T01:10:06.620" Score="0" ViewCount="1789" Body="&lt;p&gt;Seems to be like my Matebook D15 is having issues when i turn on the bluetooth adapter meanwhile im using the wifi.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Example: Im on youtube (with the bluetooth adapter off) watching a 1080p video with absolutely no problems.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If i turn on the bluetooth adapter and connect my headphones. The youtube video stars to get stucked loading the video like a slow internet connection.&#xA;i adjunt an lshw of my lap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Wo6A0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Wo6A0.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22570" LastActivityDate="2024-02-25T00:04:05.467" Title="huawei matebook d15 issue with wifi and bluetooth" Tags="|wifi|bluetooth|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24213" PostTypeId="2" ParentId="2546" CreationDate="2020-04-22T10:04:45.433" Score="0" Body="&lt;p&gt;There is a convenient way of managing &lt;code&gt;.desktop&lt;/code&gt; files via GUI interface too: &lt;a href=&quot;https://github.com/donadigo/appeditor&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppEditor&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2020-04-22T10:04:45.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24214" PostTypeId="2" ParentId="24133" CreationDate="2020-04-22T10:18:56.860" Score="0" Body="&lt;p&gt;Solved this by following the steps on &lt;a href=&quot;https://software.opensuse.org/download.html?project=network:messaging:xmpp:dino&amp;amp;package=dino&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://software.opensuse.org/download.html?project=network:messaging:xmpp:dino&amp;amp;package=dino&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo sh -c &quot;echo 'deb http://download.opensuse.org/repositories/network:/messaging:/xmpp:/dino/xUbuntu_18.04/ /' &amp;gt; /etc/apt/sources.list.d/network:messaging:xmpp:dino.list&quot;&#xA;wget -nv https://download.opensuse.org/repositories/network:messaging:xmpp:dino/xUbuntu_18.04/Release.key -O Release.key&#xA;sudo apt-key add - &amp;lt; Release.key&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Not sure why this failed though? Was the key renewed? How can I (a user) tell?&lt;/p&gt;&#xA;" OwnerUserId="16507" LastActivityDate="2020-04-22T10:18:56.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24215" PostTypeId="2" ParentId="24133" CreationDate="2020-04-22T12:37:55.990" Score="0" Body="&lt;p&gt;That is the OpenSuse PPA, not elementary os. Looks like you added that one for installing OBS. As flatpack support is added, I would go with that, to remove modifications to the system and keep it stable.&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-04-22T12:37:55.990" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24216" PostTypeId="2" ParentId="24212" CreationDate="2020-04-22T12:44:52.603" Score="0" Body="&lt;p&gt;I have that same problem, but it is not consistent. If I reconnect the headphones it is mostly gone. Do you use a docking station or something else too? I have a Dell D6000, which introduced some problems in that area too.&#xA;PS: cannot add this as a comment, as reputation is missing. :-(&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-04-22T12:44:52.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24217" PostTypeId="2" ParentId="24151" CreationDate="2020-04-22T12:54:06.003" Score="0" Body="&lt;p&gt;This sounds like Secure Boot is active. You should be able to use UEFI with elementary os, but Secure Boot can be a challange. Try turning it off in BIOS and boot again from UEFI USB.&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-04-22T12:54:06.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24218" PostTypeId="2" ParentId="22680" CreationDate="2020-04-22T12:57:25.243" Score="0" Body="&lt;p&gt;This is not supported by now, maybe opening a freature request or searching them for the topic would give more insight, if it comes or not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/387/how-can-i-report-an-issue-or-request-a-feature-for-elementary-os-to-the-develope&quot;&gt;How can I report an issue or request a feature for elementary OS to the developers?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-04-22T12:57:25.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24219" PostTypeId="2" ParentId="24043" CreationDate="2020-04-22T14:39:55.860" Score="0" Body="&lt;p&gt;Same. I am thinking about migration to another linux dist, cause this error is really annoying. I work on ElementaryOS and during my workday (8 hours) system can logout something around 2-3 times. I am preety sure this problem has appeared after last update - 5.1.&lt;/p&gt;&#xA;" OwnerUserId="22575" LastActivityDate="2020-04-22T14:39:55.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24221" PostTypeId="2" ParentId="24190" CreationDate="2020-04-22T15:33:46.623" Score="0" Body="&lt;p&gt;I understand you don't use ffado. Instead, you are using the driver snd_dice that is included by default in the linux kernel (DICE is the chipset used in some Focusrite and Presonus Firewire audio interfaces).&#xA;i don't know all the details, but I understand that snd_dice has some severe limitations. If you have made some changes in your interface settings (say under Windows 10), the driver might be struggling to communicate.&#xA;Is the interface not visible as a possible output in the sound system preferences?&#xA;If not, I would try two things:&#xA;1/ reset your interface settings and re-try in elementary&#xA;2/ (can be tricky and mess up your system a bit) install ffado and jack sound server. ffado should become the driver for your interface, but you need to blacklist snd_dice as there is a risk of driver conflict...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks, Marc&lt;/p&gt;&#xA;" OwnerUserId="12141" LastActivityDate="2020-04-22T15:33:46.623" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24222" PostTypeId="1" CreationDate="2020-04-22T17:20:13.090" Score="0" ViewCount="44" Body="&lt;p&gt;After switching to default russian, I'm stuck with ru language as start language, and no way to change it. None of regular language switching keys working( No alt+enter, shift+alt, or caps lock (which I had previously as a default for layout switching). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Since, obviously my password is in English, I'm stuck at the loading screen. &#xA;Switching to the recovery doesn't help ether since there is no way to enter commands in russian. &#xA;What should I do now? I'm already considering wiping clean whole disk, but that is not something I want to do, since I have some work done which I prefer to have saved. &lt;/p&gt;&#xA;" OwnerUserId="22464" LastActivityDate="2020-04-29T17:02:45.097" Title="No way to switch from RU language at enter screen" Tags="|language|keyboard-layout|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24223" PostTypeId="1" AcceptedAnswerId="24245" CreationDate="2020-04-22T17:57:39.757" Score="0" ViewCount="2557" Body="&lt;p&gt;I am still in my customization process within this great distro and I am wondering if there is a way to get an better control of the indicators.&#xA;I reactivated the indicators, now I am getting two network indicator icons what I want to fix.&#xA;Also can someone tell me where I can find the icons for the indicators in order to get them changes?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you very much&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2020-04-30T14:24:56.327" Title="indicators on wingpanel" Tags="|wingpanel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24224" PostTypeId="1" AcceptedAnswerId="24226" CreationDate="2020-04-22T19:53:50.913" Score="0" ViewCount="156" Body="&lt;p&gt;Running Elementary OS Hera, Ubuntu 18.04.3 LTS, Linux 5.3.0-46 generic, GTK 3.22.30.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Long story short: evaluated syncEvolution 1.5.3 - it didn't work for what I needed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Uninstalled it, as well as removed the key as I was getting an error related to the key; I now get the following message when opening the AppCenter in Elementary OS to run software updates:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Failed to Fetch Updates&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may have been caused by external, manually added software repositories or a corrupted sources file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;W: GPG error: &lt;a href=&quot;http://downloads.syncevolution.org/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://downloads.syncevolution.org/apt&lt;/a&gt; stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 728C11EAB3526360&#xA;E: The repository '&lt;a href=&quot;http://downloads.syncevolution.org/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://downloads.syncevolution.org/apt&lt;/a&gt; stable InRelease' is not signed.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: &lt;a href=&quot;http://downloads.syncevolution.org/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://downloads.syncevolution.org/apt&lt;/a&gt; stable InRelease is not (yet) available (The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 728C11EAB3526360)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I add in the key:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;:~$ sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 728C11EAB3526360&#xA;[sudo] password for mainadmin: XXXXXXXXXXXXXXXXXXX&#xA;Executing: /tmp/apt-key-gpghome.yWVXSbLaIt/gpg.1.sh --keyserver keyserver.ubuntu.com --recv-keys 728C11EAB3526360&#xA;gpg: key A36DBD1343D03AD9: public key &quot;SyncEvolution &quot; imported&#xA;gpg: Total number processed: 1&#xA;gpg:               imported: 1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will then get the following from AppCenter:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Failed to Fetch Updates&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This may have been caused by external, manually added software repositories or a corrupted sources file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;invalid: EXPKEYSIG 728C11EAB3526360 SyncEvolution &#xA;E: The repository '&lt;a href=&quot;http://downloads.syncevolution.org/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://downloads.syncevolution.org/apt&lt;/a&gt; stable InRelease' is not signed.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: &lt;a href=&quot;http://downloads.syncevolution.org/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://downloads.syncevolution.org/apt&lt;/a&gt; stable InRelease is not (yet) available (The following signatures were invalid: EXPKEYSIG 728C11EAB3526360 SyncEvolution )&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I remove the key, I'm back to the beginning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am also unable to run updates using apt-get.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Assistance is appreciated; thanks.&lt;/p&gt;&#xA;" OwnerUserId="19259" LastEditorUserId="19259" LastEditDate="2020-04-22T20:31:40.350" LastActivityDate="2020-05-27T10:04:10.450" Title="AppCenter Fails to Fetch Updates" Tags="|appcenter|ppa|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24225" PostTypeId="1" CreationDate="2020-04-22T20:23:41.980" Score="0" ViewCount="55" Body="&lt;p&gt;Under System Settings &gt; Applications I have Photo Viewer set as the default image viewer. However, when I click on an image using Files, it opens with Image Resizer. I need to right click to open an image with Photo Viewer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XLWyY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XLWyY.png&quot; alt=&quot;screenshot of application default settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18611" LastActivityDate="2024-01-04T06:01:10.117" Title="Image Resizer is the default image preview application, but it should be Photo Viewer" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24226" PostTypeId="2" ParentId="24224" CreationDate="2020-04-22T20:52:45.650" Score="0" Body="&lt;p&gt;Removed the relevant lines out of /etc/apt/sources.list; issue resolved.&lt;/p&gt;&#xA;" OwnerUserId="19259" LastActivityDate="2020-04-22T20:52:45.650" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24228" PostTypeId="1" CreationDate="2020-04-22T23:56:16.390" Score="0" ViewCount="13" Body="&lt;p&gt;Running Elementary on an HP ProBoob x360 e11 - has been great.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Went to apply updates this morning (around 3.4GB).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The updater app crashed/closed. I tried to reboot the machine. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I can't log back in when the login pages show up after reboot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can log in when going to alt+ctrl+F1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks&#xA;Sam&lt;/p&gt;&#xA;" OwnerUserId="22577" LastActivityDate="2020-04-23T00:45:45.250" Title="Can no longer long in after trying to apply updates" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24229" PostTypeId="1" CreationDate="2020-04-23T00:30:19.430" Score="0" ViewCount="107" Body="&lt;p&gt;I don't know why, but my ElementaryOS logout, when I open same applications. I just installed the operating system on my computer, update the system normally and then it started to fail. It's my first time with Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone know why it happens?&lt;/p&gt;&#xA;" OwnerUserId="22578" LastActivityDate="2024-01-07T08:06:25.760" Title="Elementary OS logout bug" Tags="|session|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24230" PostTypeId="2" ParentId="24228" CreationDate="2020-04-23T00:45:45.250" Score="1" Body="&lt;p&gt;ok I fixed this by going into the CLI and fixing apt as when I tried to run the update it said the previous update attempt had been interrupted so needed a manual command to resolve.&lt;/p&gt;&#xA;" OwnerUserId="22577" LastActivityDate="2020-04-23T00:45:45.250" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24232" PostTypeId="1" CreationDate="2020-04-23T04:40:07.270" Score="0" ViewCount="21" Body="&lt;p&gt;Is there a way to use m17n dhivehi language on elementary ?&lt;/p&gt;&#xA;" OwnerUserId="22582" LastEditorUserId="15904" LastEditDate="2020-04-28T19:48:34.453" LastActivityDate="2024-01-09T05:03:55.497" Title="Is there a way to use m17n dhivehi language on elementary?" Tags="|language|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24233" PostTypeId="2" ParentId="24223" CreationDate="2020-04-23T08:10:28.983" Score="1" Body="&lt;p&gt;Ayatana indicators for apps , tlp, tlp UI , slimbook battery - works on DELL not only Slimbooks. It should work on all laptops. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy all bolded text below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.config/autostart &amp;amp;&amp;amp; cp /etc/xdg/autostart/indicator-application.desktop ~/.config/autostart/ &amp;amp;&amp;amp; sed -i 's/^OnlyShowIn.*/OnlyShowIn=Unity;GNOME;Pantheon;/' ~/.config/autostart/indicator-application.desktop &amp;amp;&amp;amp; wget http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/w/wingpanel-indicator-ayatana/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb &amp;amp;&amp;amp; sudo dpkg -i wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb &amp;amp;&amp;amp; systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then type in terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/yourusername&#xA;&#xA;&#xA;sudo vi indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;press ins button to go into insert mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;press ctrl+shift+v to paste&lt;/p&gt;&#xA;&#xA;&lt;p&gt;press esc button to escape insert mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:wq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will write and quit the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;script will run, install ayatana and restart the machine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works in hera 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For double wi-fi icon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv /etc/xdg/autostart/nm-applet.desktop /etc/xdg/autostart/nm-applet.desktop.old&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additional gift for battery saver. Requires tlp to work&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;&#xA;&#xA;sudo apt install tlp&#xA;&#xA;&#xA;&#xA;sudo add-apt-repository ppa:slimbook/slimbook&#xA;&#xA;&#xA;&#xA;sudo apt update&#xA;&#xA;&#xA;&#xA;sudo apt install slimbookbattery&#xA;&#xA;&#xA;&#xA;sudo apt install gnome-shell-extension-appindicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need also tlp UI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linuxuprising/apps&#xA;&#xA;&#xA;&#xA;sudo apt install tlpui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;to remove slimbook battery and app indicator&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove slimbookbattery gnome-shell-extension-appindicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove tlp&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove tlp UI:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove tlpui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="8902" LastEditDate="2020-04-30T14:24:56.327" LastActivityDate="2020-04-30T14:24:56.327" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24234" PostTypeId="2" ParentId="22641" CreationDate="2020-04-23T08:10:52.003" Score="0" Body="&lt;p&gt;I &lt;a href=&quot;https://github.com/search?q=is%3Aopen+is%3Aissue+user%3Aelementary+suspend+time&quot; rel=&quot;nofollow noreferrer&quot;&gt;searched Github for related issues&lt;/a&gt; and it appears to be a known bug:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter/issues/306&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/issues/306&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20186" LastActivityDate="2020-04-23T08:10:52.003" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24235" PostTypeId="2" ParentId="9513" CreationDate="2020-04-23T15:26:19.503" Score="0" Body="&lt;p&gt;In Elementary Loki systems settings I no longer have Sound. Not sure what I installed to loose it. Anyway &lt;strong&gt;Jorge R. Marin's&lt;/strong&gt; solution above to install &lt;strong&gt;pavucontrol&lt;/strong&gt; via Terminal got sound back on my Toshiba Satellite laptop running on Elementary Loki. Thank you Jorge. &lt;/p&gt;&#xA;" OwnerUserId="14741" LastActivityDate="2020-04-23T15:26:19.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24237" PostTypeId="1" CreationDate="2020-04-23T16:00:02.337" Score="0" ViewCount="381" Body="&lt;p&gt;Help me please fix the problem with sound.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;alsactl init&#xA;alsactl: init:1757: No soundcards found...&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;lspci -v | grep -A7 -i &quot;audio&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:1f.3 Multimedia audio controller: Intel Corporation Device 34c8 (rev 30)&#xA;    Subsystem: Acer Incorporated [ALI] Device 136f&#xA;    Flags: bus master, fast devsel, latency 32, IRQ 16&#xA;    Memory at 601d160000 (64-bit, non-prefetchable) [size=16K]&#xA;    Memory at 601d000000 (64-bit, non-prefetchable) [size=1M]&#xA;    Capabilities: &#xA;    Kernel driver in use: sof-audio-pci&#xA;    Kernel modules: snd_hda_intel, sof_pci_dev&lt;/p&gt;&#xA;&#xA;&lt;p&gt;00:1f.4 SMBus: Intel Corporation Ice Lake-LP SMBus Controller (rev 30)&#xA;    Subsystem: Acer Incorporated [ALI] Device 136f&#xA;    Flags: medium devsel, IRQ 255&#xA;    Memory at 601d16a000 (64-bit, non-prefetchable) [size=256]&#xA;    I/O ports at 3040 [size=32]&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;dmesg | grep &quot;audio&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[ 4.119981] sof-audio-pci 0000:00:1f.3: warning: No matching ASoC machine driver found&lt;br&gt;&#xA;[ 4.119988] sof-audio-pci 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100&lt;br&gt;&#xA;[ 4.120132] sof-audio-pci 0000:00:1f.3: use msi interrupt mode&lt;br&gt;&#xA;[ 4.124535] sof-audio-pci 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])&lt;br&gt;&#xA;[ 5.606185] sof-audio-pci 0000:00:1f.3: hda codecs found, mask 5&lt;br&gt;&#xA;[ 5.606186] sof-audio-pci 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now&lt;br&gt;&#xA;[ 5.608036] sof-audio-pci 0000:00:1f.3: error: codec #0 probe error, ret: -2&lt;br&gt;&#xA;[ 5.612971] sof-audio-pci 0000:00:1f.3: Direct firmware load for intel/sof/sof-icl.ri failed with error -2&lt;br&gt;&#xA;[ 5.612973] sof-audio-pci 0000:00:1f.3: error: request firmware intel/sof/sof-icl.ri failed err: -2&lt;br&gt;&#xA;[ 5.612974] sof-audio-pci 0000:00:1f.3: error: failed to load DSP firmware -2   &lt;/p&gt;&#xA;" OwnerUserId="22586" LastEditorUserId="3018" LastEditDate="2020-05-07T16:03:05.360" LastActivityDate="2024-01-17T23:00:35.110" Title="No Sound in Elementary 5.1 on Acer Swift 5 sf514" Tags="|release-hera|sound|acer|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="24238" PostTypeId="2" ParentId="22537" CreationDate="2020-04-23T17:00:54.233" Score="0" Body="&lt;p&gt;This has instructions for setting up add-apt-repository:&#xA;&lt;a href=&quot;https://linuxize.com/post/how-to-add-apt-repository-in-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxize.com/post/how-to-add-apt-repository-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22587" LastActivityDate="2020-04-23T17:00:54.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24239" PostTypeId="2" ParentId="24225" CreationDate="2020-04-23T18:31:51.443" Score="0" Body="&lt;p&gt;In order to fix this, &lt;strong&gt;right mouse click&lt;/strong&gt; on an image file, select &lt;strong&gt;Open with&lt;/strong&gt; and choose from the menu there &lt;strong&gt;Other application&lt;/strong&gt;, &lt;strong&gt;no matter that your favorite application is on the list above&lt;/strong&gt;. On the next popup screen choose your fav application and set the checkbox &lt;strong&gt;Set as default&lt;/strong&gt; if it isn't set already and confirm with &lt;strong&gt;Select&lt;/strong&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;note: If your favorite application is not in the list, probably you can find it using the &quot;View All Applications button&quot; there. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;From now on, all files with this file extension will be open with the application you just choosed for. Image files can be a lot of different file extension formats and the settings you describe using the screenshot on your question cannot fit for all of them (installing a new program can steal the right for automatic open of some, for example), so this is the way you can change the default program for any file extension(not only images), following the steps above. Again, the steps I have described will not work for all image files automatically, but for all files with the  current extension you've set up. If you want to change it for another ones also, you have to repeat the steps above. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-04-23T18:31:51.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24240" PostTypeId="2" ParentId="22617" CreationDate="2020-04-23T18:43:22.810" Score="0" Body="&lt;p&gt;You can edit the &lt;strong&gt;20_elementary.pantheon.wm.gschema.override&lt;/strong&gt; file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then comment out&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#button-layout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Run the installer again&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall io.elementary.code&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then edit the &lt;strong&gt;20_elementary.pantheon.wm.gschema.override&lt;/strong&gt; file again and uncomment the &lt;strong&gt;button-layout&lt;/strong&gt; line&lt;/p&gt;&#xA;" OwnerUserId="22589" LastActivityDate="2020-04-23T18:43:22.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24243" PostTypeId="1" AcceptedAnswerId="24247" CreationDate="2020-04-24T08:16:56.300" Score="0" ViewCount="165" Body="&lt;p&gt;Stupid me, I've deleted my /boot folder with a little sudo rm * command. (I was doing two things at the same time, wrong terminal and... it's gone). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Without rebooting, I used boot-repair. When I rebooted the grub was here but I could boot into Elementary OS. I just have a black screen for 2 mins and then this message :&#xA;- Failed to boot both default and fallback entries or &#xA;- out of memory -&gt; Minimal bash like&#xA;Finally it goes back to grub with it's 4 entries :&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;EFI/BOOT/bkpbootx64.efi&lt;/li&gt;&#xA;&lt;li&gt;EFI/BOOT/fbx64.efi&lt;/li&gt;&#xA;&lt;li&gt;EFI/Ubuntu/mmx64.efi&lt;/li&gt;&#xA;&lt;li&gt;System setup &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;I've tried to reinstall grub with the eOS LiveCD, the boot-repair iso, and various thread like &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2894/grub-not-showing-after-installing-elementary-os-alongside-windows-10&quot;&gt;this one&lt;/a&gt; , but I still have a black screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is my boot-repair report (no internet on this computer) : &#xA;&lt;a href=&quot;https://i.stack.imgur.com/Zfnti.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Zfnti.jpg&quot; alt=&quot;Boot repair&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank a lot !&lt;/p&gt;&#xA;" OwnerUserId="22592" LastActivityDate="2020-04-24T12:57:56.697" Title="I deleted my /boot folder and it's strange but now elementary OS doesn't boot anymore" Tags="|boot|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24244" PostTypeId="2" ParentId="24243" CreationDate="2020-04-24T10:37:52.107" Score="0" Body="&lt;p&gt;See this link. It contains the solution. &lt;a href=&quot;https://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/114884/how-to-repair-grub2-when-ubuntu-wont-boot/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-24T10:37:52.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24245" PostTypeId="2" ParentId="24223" CreationDate="2020-04-24T10:45:17.557" Score="1" Body="&lt;p&gt;how to remove gaps between icons in wing panel a tutorial&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - Install the wingpanel indicator mentioned in previous post&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - Download libayatana_compatibility.so.zip from here &lt;a href=&quot;https://github-production-repository-file-5c1aeb.s3.amazonaws.com/144302344/3776351?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;amp;X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20200424%2Fus-east-1%2Fs3%2Faws4_request&amp;amp;X-Amz-Date=20200424T103942Z&amp;amp;X-Amz-Expires=300&amp;amp;X-Amz-Signature=6e7af642fc8bc0c37808998150422a2466f0e4dd1dfb20d26358dccb1a07243a&amp;amp;X-Amz-SignedHeaders=host&amp;amp;actor_id=0&amp;amp;repo_id=144302344&amp;amp;response-content-disposition=attachment%3Bfilename%3Dlibayatana_compatibility.so.zip&amp;amp;response-content-type=application%2Fzip&quot; rel=&quot;nofollow noreferrer&quot;&gt;libayatana_compatibility.so.zip&lt;/a&gt; and unzip it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and go to Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /home/username/Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;unzip libayatana_compatibility.so.zip&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 - Go To (with sudo) /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo -i&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type your sudo user password &lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 - Backup your libayatana_compatibility.so&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mv libayatana_compatibility.so libayatana_compatibility.backup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5 - Replace the libayatana_compatibility.so with the zipped one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cp /home/username/Downloads/libayatana-compatibility.so /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6 - reboot &lt;/p&gt;&#xA;&#xA;&lt;p&gt;systemctl reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators/issues/1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this works to me with no problem.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-04-26T20:28:12.687" LastActivityDate="2020-04-26T20:28:12.687" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="24246" PostTypeId="1" CreationDate="2020-04-24T12:54:05.877" Score="1" ViewCount="72" Body="&lt;p&gt;I wanted to raise another question since I am configuring my new laptop at the moment.&#xA;So I am using a lot of VMs and also do a lot of managing on ESXis. Therefore I have installed VMware workstation to load the VMs. &#xA;I played around with different workspaces which is really working great. &#xA;What I want to have right now if a custom &quot;application/starter&quot; to run a specific VM in fullscreen but I want to have it started on a second workspace. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already checked the VMware Workstation options and I am able to start the VM with the vmwarerun command and from my understanding I should be able to use devilspie or other tools to start on the 2nd workspace in fullscreen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So my overall achievement will be to have the mail workspace in the middle. on the left/first workspace run spotify and mailspring and on the right workspace which will be the third one I want to run a Win10 VM where I have several windows applications running. and this should be running on startup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;in addition to that a kind of a starter in plank will be great but nice to have :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks a lot for your inputs.&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2020-04-24T12:54:05.877" Title="autostart applications on diferent workspaces" Tags="|workspace|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24247" PostTypeId="2" ParentId="24243" CreationDate="2020-04-24T12:57:56.697" Score="0" Body="&lt;p&gt;I've manager to get it work again. I'm pretty new to linux so don't hesitate to correct my answer in the comments with the rights terms. &#xA;Here is the procedure : &#xA;Boot with  a&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Retrieve the mount point of the EFI partition and the System Partition: &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo fdisk -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;In my case it was : &#xA;    [1]=system partition = /dev/sda2&#xA;    [2]=efi partition = /dev/sda1&#xA;    [3]=disk = /dev/sda&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mount the partitions so when we can edit them with chroot :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount [1] /mnt&#xA;sudo mount [2] /mnt/boot/efi&#xA;for i in /dev /dev/pts /proc /sys /run; do sudo mount -B $i /mnt$i; done&#xA;sudo chroot /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Find the kernel version installed on the system in /lib/modules or :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | grep linux-image-.*-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reinstall the kernel :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall linux-image-W.X.Y-ZZ-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Install grub :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grub-install [3]&#xA;update-grub &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And it should be ok. &#xA;The only problem I have now is my splashscreen doesn't show up anymore.&lt;/p&gt;&#xA;" OwnerUserId="22592" LastActivityDate="2020-04-24T12:57:56.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24248" PostTypeId="2" ParentId="24232" CreationDate="2020-04-24T14:54:53.113" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://wikis.swarthmore.edu/ling073/Dhivehi/Keyboard&quot; rel=&quot;nofollow noreferrer&quot;&gt;This&lt;/a&gt; looks like what you want.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-24T14:54:53.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24249" PostTypeId="2" ParentId="19444" CreationDate="2020-04-24T15:39:08.580" Score="1" Body="&lt;p&gt;Well this works for me in Hera 5.1.3 in codeblocks. Copy paste this to &lt;em&gt;Settings&gt;Environment settings&gt;Terminal to launch console program&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.terminal -t $TITLE -x&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22594" LastActivityDate="2020-04-24T15:39:08.580" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24250" PostTypeId="2" ParentId="5089" CreationDate="2020-04-24T18:52:33.063" Score="0" Body="&lt;p&gt;I guess the process is simiar to debian, see: &lt;a href=&quot;https://www.youtube.com/watch?v=Kg8CSdc0YAA&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=Kg8CSdc0YAA&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;just have to edit the entries in the files contained in &#xA;/etc/apt/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;replacing with the ones related to the newer Ubuntu LTS&lt;/p&gt;&#xA;" OwnerUserId="22596" LastActivityDate="2020-04-24T18:52:33.063" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24253" PostTypeId="2" ParentId="23965" CreationDate="2020-04-24T21:02:13.137" Score="0" Body="&lt;p&gt;I have also faced the same issue. I managed to get the packages installed by using &lt;code&gt;aptitude&lt;/code&gt; instead of &lt;code&gt;apt-get&lt;/code&gt; or &lt;code&gt;apt&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;aptitude&lt;/code&gt; also detects the dependency issues, but offers a few more automated solutions. The second solution it offered was to remove libglib2.0-bin, install libglib2.0-bin:i386, and upgrade libglib2.0-0, libglib2.0-0:i386, and libglib2.0-dev. This worked and I got my sound settings back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However there may be consequences I'm not aware of, so please exercise caution.&lt;/p&gt;&#xA;" OwnerUserId="22601" LastActivityDate="2020-04-24T21:02:13.137" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24254" PostTypeId="1" CreationDate="2020-04-24T21:16:19.500" Score="0" ViewCount="99" Body="&lt;p&gt;I just installed elementary OS 5.1.3 Hera right and I notice that wingpanel font color isn't changing to black when I define a white wallpaper. As I remember, it this doesn't happened in other versions. Does someone know if it is due to new version or something weird happened with my installation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nJBRJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nJBRJ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14071" LastEditorUserId="15904" LastEditDate="2020-04-30T14:23:55.583" LastActivityDate="2024-01-11T00:03:30.383" Title="Wingpanel doesn't changing color when change it wallpaper" Tags="|release-hera|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24255" PostTypeId="2" ParentId="14956" CreationDate="2020-04-24T21:19:35.220" Score="0" Body="&lt;p&gt;Sorry for this, but I had to. A lot of people are looking for the solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://sysadmin.info.pl/en/how-to-change-the-grey-background-on-lock-screen-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to change the grey background on lock screen in Elementary OS - two videos which explain the below method&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Full solution below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tested on Hera 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Downloaded this: &lt;a href=&quot;https://github.com/elementary/greeter/archive/master.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/archive/master.zip&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;from &lt;a href=&quot;https://github.com/elementary/greeter/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Extracted the zip to /tmp&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I opened terminal, sudo -i, typed root password. Then run gimp as root (just type gimp in terminal), saved jpg file as png in greeter-master/data folder (replaced previous texture.png file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edited the SystemBackground.vala file located in /tmp/greeter-master/compositor/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo vi /tmp/greeter-master/compositor/SystemBackground.vala&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changed path from:&#xA;var texture_file = GLib.File.new_for_uri (&quot;resource:///io/elementary/desktop/gala/texture.png&quot;);&lt;/p&gt;&#xA;&#xA;&lt;p&gt;to:&#xA;var texture_file = GLib.File.new_for_uri (&quot;resource:///io/elementary/greeter/texture.png&quot;);&#xA;Installed all dependencies listed here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/greeter/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/blob/master/README.md&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gnome-settings-daemon &gt;= 3.27&#xA;how to check version in terminal:&#xA;sudo gnome-control-center --version&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Very important:&lt;/p&gt;&#xA;&#xA;#&#xA;&#xA;&lt;p&gt;Installed dependencies:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install -y libaccountsservice-dev libgdk-pixbuf2.0-dev libgranite-dev libgtk-3-dev liblightdm-gobject-1-dev libwingpanel-2.0-dev libx11-dev meson valac libmutter-2-0 libmutter-2-dev&lt;/p&gt;&#xA;&#xA;#&#xA;&#xA;&lt;p&gt;Compiled as root&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /tmp/greeter-master&lt;/p&gt;&#xA;&#xA;&lt;p&gt;meson build --prefix=/usr&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd build&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ninja&lt;/p&gt;&#xA;&#xA;&lt;p&gt;ninja install&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-24T21:19:35.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24256" PostTypeId="2" ParentId="24254" CreationDate="2020-04-24T21:37:25.177" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h5fSS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h5fSS.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It looks like something weird happened with your installation.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-24T21:37:25.177" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24259" PostTypeId="1" CreationDate="2020-04-25T05:39:09.477" Score="0" ViewCount="266" Body="&lt;p&gt;I wanted to download and install Elementary Os, so I read the instructions carefully and watched additional tutorials. So far everything has worked out great. However, when I boot the installer from my USB stick, I first come to the start menu where it says that the installer starts in 10 seconds. Then I get a black picture and then this: &lt;a href=&quot;https://i.stack.imgur.com/DTuxz.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/DTuxz.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do you know how I can fix the problem?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System:&#xA;Ryzen 5 2600&#xA;RTX 2060&#xA;16GB DDR4&#xA;Windows 10&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm looking forward to your reply :)&lt;/p&gt;&#xA;" OwnerUserId="22613" LastActivityDate="2024-01-05T19:04:50.530" Title="Why cant I install elementary os?" Tags="|system-installation|boot|system|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24261" PostTypeId="2" ParentId="21960" CreationDate="2020-04-25T08:14:23.973" Score="0" Body="&lt;p&gt;Unable to login after 5.1 update&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21487/unable-to-login-after-5-1-update&quot;&gt;Unable to login after 5.1 update&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;terminal : ctrl+alt+F1&#xA;login&#xA;sudo -i&#xA;cd /home/username&#xA;chown username:username .Xauthority&lt;/p&gt;&#xA;&#xA;&lt;p&gt;because it is owned by root after the upgrade&#xA;ctr+alt+F7&#xA;login&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T08:14:23.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24262" PostTypeId="2" ParentId="24259" CreationDate="2020-04-25T08:17:19.383" Score="0" Body="&lt;p&gt;The quality of the image is a nightmare. Prepare bootable usb stick using newest elementary OS iso and balena etcher program instead of Rufus or any other software.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T08:17:19.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24263" PostTypeId="2" ParentId="16068" CreationDate="2020-04-25T08:30:22.987" Score="0" Body="&lt;p&gt;Elementary partitions should be done manually. &#xA;1024 MB mounted as /boot/efi formatted as fat32&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Swap 8 GB formatted as swap and mounted as swap&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Main partition for system mounted as / &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Home partition mounted as /home&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Size of main and home depends on you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can additionally create var partition but not necessary.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The boot partition do the job.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T08:30:22.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24266" PostTypeId="1" CreationDate="2020-04-25T09:30:22.630" Score="0" ViewCount="45" Body="&lt;p&gt;i've got a thinkpad X1 carbon gen 2 with thinkpad onelink pro dock. the usb and HDMI port work well but the ethernet port does not.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found a driver here : &lt;a href=&quot;https://www.asix.com.tw/download.php?sub=searchresult&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.asix.com.tw/download.php?sub=searchresult&lt;/a&gt; (third line)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;but i'm stuck for the install : when i tried to &quot;make&quot; the files, it's says &quot;error 2&quot; (see picture)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;can you help me to install it or find an other solution...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thx&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bmIkZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bmIkZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22618" LastActivityDate="2024-01-06T07:05:10.580" Title="Ethernet connection USB 3.0" Tags="|ethernet|thinkpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24267" PostTypeId="2" ParentId="19444" CreationDate="2020-04-25T09:58:18.180" Score="1" Body="&lt;p&gt;This has been fixed by the developers in the newest release of elementaryOS.&lt;/p&gt;&#xA;" OwnerUserId="18040" LastActivityDate="2020-04-25T09:58:18.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24268" PostTypeId="1" CreationDate="2020-04-25T10:23:31.867" Score="0" ViewCount="93" Body="&lt;p&gt;How I must give a higher permission to flatpaks? for example I can't send files with Telegram flatpak.&lt;/p&gt;&#xA;" OwnerUserId="22619" LastActivityDate="2024-01-06T00:06:00.783" Title="Giving higher permission to flatpaks" Tags="|permissions|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24269" PostTypeId="2" ParentId="24136" CreationDate="2020-04-25T11:29:28.323" Score="0" Body="&lt;p&gt;In the end, I just plug out my headphones when I want to use speakers and it automatically switches to speakers, and when I want to use headphones, I just plug them back in.&lt;/p&gt;&#xA;" OwnerUserId="22471" LastActivityDate="2020-04-25T11:29:28.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24270" PostTypeId="1" CreationDate="2020-04-25T11:35:59.347" Score="1" ViewCount="412" Body="&lt;p&gt;I would say that I have a pretty good computer, so that shouldn't be a problem:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;16GB RAM&lt;/li&gt;&#xA;&lt;li&gt;i5-6600&lt;/li&gt;&#xA;&lt;li&gt;RX480 8GB(i did install the drivers)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Some examples of it running poorly are Discord crashing all the time, sometimes windows take more than 10 seconds to open, the &quot;right-click menu&quot; when let's say I right-click a file is awful, it is so slow that I can't even select the option I want properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is overall really slow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I tried to do is install Wingpanel System Monitor to check my CPU and RAM usage but it was fine, like CPU is at 35% most of the time and RAM as well is on low usage.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I freshly installed Elementary OS a week ago and I don't have that many Apps. Major ones are Discord, VS Code, RubyMine and WebStorm and that's pretty much it of big apps.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is even running slow when I'm only running Discord.&lt;/p&gt;&#xA;" OwnerUserId="22471" LastActivityDate="2020-04-26T03:58:22.023" Title="Elementary OS is running extremely slow and it's almost unusable" Tags="|release-hera|system|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24271" PostTypeId="2" ParentId="24268" CreationDate="2020-04-25T12:08:02.283" Score="0" Body="&lt;p&gt;You can do this via the command line. The specific command you need is (it may need to be run as sudo):&lt;/p&gt;&#xA;&#xA;&lt;p&gt;flatpak override package_name_here --filesystem=path_here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you have an odd path &amp;amp; it complains about an &quot;unexpected filesystem suffix&quot;, just put the path part in quotes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A more complete list of permissions commands is found here - &lt;a href=&quot;http://docs.flatpak.org/en/latest/sandbox-permissions.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://docs.flatpak.org/en/latest/sandbox-permissions.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T12:08:02.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24272" PostTypeId="2" ParentId="24145" CreationDate="2020-04-25T13:29:14.233" Score="0" Body="&lt;p&gt;There is no way to do that through the UI.  One way it could be done would be to set up a custom contract as described in the README here: &lt;a href=&quot;https://github.com/elementary/contractor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/contractor&lt;/a&gt;.  You can then insert the required flags in the Exec line.  Unfortunately it means you have to use the context menu to launch the app though.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another way would be to create a &lt;code&gt;.desktop&lt;/code&gt; file with the appropriate Exec line, MimeType(s) and Name  (using the existing .desktop as a template) and put it in &lt;code&gt;~/.local/share/applications&lt;/code&gt;.  You can then set this as the default app (although you may have to look in &quot;Other Application/View all Applications&quot;).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-04-25T13:29:14.233" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24274" PostTypeId="1" CreationDate="2020-04-25T18:07:03.437" Score="1" ViewCount="285" Body="&lt;p&gt;I'm on Eos HERA 5.1.3&#xA;My bluetooth auto start when i wake up my laptop.&#xA;I would like the bluetooth to stay off on wake up, reboot, boot....&#xA;But i d'ont want to ban it or kill it everytime...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to reproduce :&#xA;Disable Bluetooth, close the laptop, open the laptop, login, bluetooth is on.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for you help&lt;/p&gt;&#xA;" OwnerUserId="22622" LastEditorUserId="15904" LastEditDate="2020-04-30T14:24:41.597" LastActivityDate="2020-04-30T14:24:41.597" Title="Bluetooth start automatically on wake up" Tags="|release-hera|bluetooth|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24275" PostTypeId="2" ParentId="24266" CreationDate="2020-04-25T20:46:58.803" Score="0" Body="&lt;p&gt;It seems that one shouldn't have spaces in the folder names (containing the driver of course) when building the driver. Replacing the spaces with underscores should fix the issue. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T20:46:58.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24276" PostTypeId="2" ParentId="24274" CreationDate="2020-04-25T20:52:46.050" Score="2" Body="&lt;p&gt;You can disable the Bluetooth service.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop bluetooth &#xA;&#xA;sudo systemctl disable bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-25T20:52:46.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24277" PostTypeId="2" ParentId="16899" CreationDate="2020-04-25T23:31:50.197" Score="0" Body="&lt;p&gt;I can confirm that Arc theme is working perfectly in eOS 5.1.3 if you're looking for good themes and you can easily install it by the terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install arc-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cBOX1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cBOX1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-04-25T23:31:50.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24282" PostTypeId="1" AcceptedAnswerId="24290" CreationDate="2020-04-26T12:10:02.220" Score="0" ViewCount="4367" Body="&lt;p&gt;I am trying to install AMD drivers for my RX 480 8GB GPU and I'm following &lt;a href=&quot;https://www.amd.com/en/support/kb/faq/gpu-635&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article from AMD&lt;/a&gt; to install it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I get to the point of running this command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./amdgpu-pro-install -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It throws an error saying: &lt;code&gt;Unsupported DEB-based OS: /etc/os-release ID 'elementary'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I looked it up on the internet and I found one article about it. It was &lt;a href=&quot;https://community.amd.com/thread/220723&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;. In the answer, it says to find &quot;ubuntu&quot; string inside the code of the &lt;code&gt;amdgpu-pro-install&lt;/code&gt; and replace it with &lt;code&gt;debian&lt;/code&gt;. But I can't find the &lt;code&gt;ubuntu&lt;/code&gt; string inside of that file, maybe the code changed since the question was asked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I see in that file is&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;function os_release() {&#xA;        if [[ -r  /etc/os-release ]]; then&#xA;                . /etc/os-release&#xA;&#xA;                case &quot;$ID&quot; in&#xA;                ubuntu|linuxmint|debian)&#xA;                        :&#xA;                        ;;&#xA;                *)&#xA;                        echo &quot;Unsupported DEB-based OS: `&#xA;                                `/etc/os-release ID '$ID'&quot; | stderr&#xA;                        exit 1&#xA;                        ;;&#xA;                esac&#xA;        else&#xA;                echo &quot;Unsupported OS&quot; | stderr&#xA;                exit 1&#xA;        fi&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There is &lt;code&gt;ubuntu&lt;/code&gt; in the &lt;code&gt;case&lt;/code&gt; but I don't think that's it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;" OwnerUserId="22471" LastActivityDate="2022-01-05T12:39:25.813" Title="Can't install AMD drivers on ElementaryOS Hera - Unsupported DEB-based OS" Tags="|release-hera|drivers|amd|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24283" PostTypeId="2" ParentId="17102" CreationDate="2020-04-26T12:45:32.117" Score="1" Body="&lt;p&gt;I had the same issue several times both on Juno and Hera. And usually it worked fine after a fresh install. But I just came to see that &lt;em&gt;sometimes&lt;/em&gt; even after a fresh install, it doesn't open. So here is the solution:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open Terminal&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo su&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cd /home/user/.local/share/io.elementary.code/&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(here the &quot;user&quot; is your username on eOS).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;chmod 777 unsaved/&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="22628" LastEditorUserId="22628" LastEditDate="2020-04-27T23:07:31.697" LastActivityDate="2020-04-27T23:07:31.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24284" PostTypeId="1" CreationDate="2020-04-26T12:53:56.883" Score="0" ViewCount="156" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/muzsf.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/muzsf.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;Im trying to boot form usb but keep getting a failed message! Can anyone help . &#xA;I had almost finished installation previously but my laptop died in the later stages, is this the cause? &lt;/p&gt;&#xA;" OwnerUserId="22629" LastActivityDate="2024-02-06T03:07:05.823" Title="Elementary not booting from usb" Tags="|boot|usb-drive|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24285" PostTypeId="2" ParentId="24284" CreationDate="2020-04-26T13:39:45.597" Score="0" Body="&lt;p&gt;First, verify your ISO image (check the hash of the image as described &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;)&#xA;Flash the elementaryOS iso again on another USB (if possible). &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't help, next step is to boot into live session, go to the &lt;code&gt;/boot/efi&lt;/code&gt; and rename &lt;code&gt;grubx64.efi&lt;/code&gt; to &lt;code&gt;mmx64.efi&lt;/code&gt; as answered &lt;a href=&quot;https://askubuntu.com/questions/1085550/cant-install-ubuntu-18-10-on-xps-15-efi-boot-mmx64-efi-not-found&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another solution I found on &lt;a href=&quot;https://www.linuxquestions.org/questions/linux-newbie-8/something-has-gone-seriously-wrong-import_mok_state-failed-4175665926/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this forum&lt;/a&gt;, where he used 2 USB keys to boot from one and install from another.&lt;/p&gt;&#xA;" OwnerUserId="4417" LastActivityDate="2020-04-26T13:39:45.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24286" PostTypeId="2" ParentId="24282" CreationDate="2020-04-26T13:46:56.727" Score="0" Body="&lt;p&gt;If I understand the code correctly, it checks the name of the release (in your case &lt;code&gt;elementary&lt;/code&gt;) and tries to match it to &lt;code&gt;ubuntu|linuxmint|debian&lt;/code&gt; (&lt;code&gt;|&lt;/code&gt; means or). If release is different from any of this options, it prints &lt;code&gt;Unsupported DEB-based OS:&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Based on this, I would try to replace &lt;code&gt;debian&lt;/code&gt; with &lt;code&gt;elementary&lt;/code&gt; and see what happens. &lt;/p&gt;&#xA;" OwnerUserId="4417" LastActivityDate="2020-04-26T13:46:56.727" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24287" PostTypeId="1" CreationDate="2020-04-26T16:16:07.373" Score="0" ViewCount="106" Body="&lt;p&gt;I like to see my folders etc. which are in Desktop. On eOS, I had to install the &lt;code&gt;Desktop Folder&lt;/code&gt; app to do this. I have added that in the start up application list. However when I start my laptop, it initially shows the folders on the Desktop. However once I switch between workspace it is completely gone, even from the primary workspace. If I go to Applications and try to click &lt;code&gt;Desktop Folder&lt;/code&gt; to run, it does nothing. I am using eOS-5.1.3 HERA on Lenovo X1 Carbon 7th Gen. &#xA;Is there any way around to overcome this problem?&lt;/p&gt;&#xA;" OwnerUserId="22244" LastEditorUserId="15904" LastEditDate="2020-04-28T09:16:51.737" LastActivityDate="2024-01-09T02:04:45.513" Title="Desktop is not showing with Desktop Folder" Tags="|release-hera|desktop|desktop-environment|show-desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24290" PostTypeId="2" ParentId="24282" CreationDate="2020-04-26T17:50:38.447" Score="1" Body="&lt;p&gt;you will must make some modifications in the system, look this link:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19018/amdgpu-pro-on-juno-to-improve-performance-and-compability/19023#19023&quot;&gt;AMDGPU-Pro on Juno to improve performance and compability&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2020-04-26T17:50:38.447" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24291" PostTypeId="1" CreationDate="2020-04-26T22:36:35.973" Score="0" ViewCount="160" Body="&lt;p&gt;if I want to connect to a WIFI its not prompting for the password and remains on encrypted?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;any hint?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;its not even possible if I set the SSID and PSK for a new network&#xA;So I am only able to connect to the network which I set on the initial setup &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gppqE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gppqE.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19451" LastEditorUserId="19451" LastEditDate="2020-04-27T17:30:56.733" LastActivityDate="2024-01-08T23:08:20.997" Title="not able to connect to WIFI which has no PSK" Tags="|networking|" AnswerCount="1" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="24292" PostTypeId="2" ParentId="24229" CreationDate="2020-04-27T00:39:16.903" Score="0" Body="&lt;p&gt;Not my first time with eOS, However just came back to it. Same issue with 5.1 seems like any of the system apps when opened just crash me back to the login screen. &lt;/p&gt;&#xA;" OwnerUserId="22635" LastActivityDate="2020-04-27T00:39:16.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24294" PostTypeId="2" ParentId="22775" CreationDate="2020-04-27T08:30:18.223" Score="0" Body="&lt;p&gt;i found a workaround but updates could remove it, it's not very practical but it works.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install git build-essential&#xA;git clone https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/backport-iwlwifi.git&#xA;cd backport-iwlwifi/&#xA;make defconfig-iwlwifi-public&#xA;sed -i 's/CPTCFG_IWLMVM_VENDOR_CMDS=y/# CPTCFG_IWLMVM_VENDOR_CMDS is not set/' .config&#xA;make -j4&#xA;sudo make install&#xA;sudo modprobe iwlwifi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21051" LastActivityDate="2020-04-27T08:30:18.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24295" PostTypeId="2" ParentId="24237" CreationDate="2020-04-27T09:09:04.643" Score="0" Body="&lt;p&gt;Install &quot;PulseAudio Volume Control&quot; from AppCenter.&#xA;and reboot.&lt;/p&gt;&#xA;" OwnerUserId="22639" LastActivityDate="2020-04-27T09:09:04.643" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24297" PostTypeId="1" CreationDate="2020-04-27T10:36:56.153" Score="0" ViewCount="60" Body="&lt;p&gt;I just installed eOS and tried to rearrange the screens. Once I rearrange the displays in the menu, so that my main display is to the right and not to the left, the mouse buttons stop working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have two matching LG displays and also tried the LXRandR app, but the effect was the same. &#xA;Once you rearrange the displays, you can only move the mouse cusor but the buttons don't work. The keyboard still works and I was able to return to the previous settings this way.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mouse: Logitech M215, Keyboard Logitech K330&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It doesn't happen if you log out/ restart so I guess it's a problem with the desktop enviroment.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope you can suggest a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="22640" LastActivityDate="2024-01-31T16:04:05.490" Title="After rearraning displays, the mouse buttons stop working" Tags="|display|settings|mouse|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24299" PostTypeId="2" ParentId="11497" CreationDate="2020-04-27T15:09:28.753" Score="0" Body="&lt;p&gt;I had the same problem. No solutions worked for me except Run as Administrator. Simple solution, but at last this solved the error.&lt;/p&gt;&#xA;" OwnerUserId="22646" LastActivityDate="2020-04-27T15:09:28.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24300" PostTypeId="1" CreationDate="2020-04-27T15:31:16.827" Score="0" ViewCount="73" Body="&lt;p&gt;So love Elementary OS but confused by DNS. Read another answer to a similar question but didn't understand it. Hoping someone can explain a little more clearly. My issue is resolving local hostnames. This is the testing I have done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have a little Raspberry Pi set up on the same network. The hostname is &quot;raspberrypi&quot;. It is registered in DNS and I have confirmed that its hostname can be resolved using local DNS from other machines.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I open a terminal window in Elementary and ping www.bbc.co.uk, www.amazon.co.uk or other external sites DNS resolves correctly. However if I ping the Pi - eg &quot;raspberrypi&quot; I simply get &quot;Name or Service not known&quot;. Same if I try to SSH to raspberrypi - I get the same message with the added note - name cannot be resolved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i run &quot;nslookup raspberrypi&quot; it fails and returns 127.0.0.53 as the name server its using?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run &quot;nslookup raspberrypi 192.168.1.1&quot; - specifying my default internal DNS server it works fine and can resolve it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If I run &quot;systemd-resolve --status&quot; I can see that 192.168.1.1 is set as the DNS server for my wireless interface.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So why isn't Elementary using the DNS server set to resolve localhost names?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Can anyone explain? Thanks&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="22641" LastActivityDate="2024-01-09T03:07:40.963" Title="DNS Queries fail to resolve local hostnames and yet NSlookup Works" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24302" PostTypeId="2" ParentId="24287" CreationDate="2020-04-27T17:26:29.747" Score="0" Body="&lt;p&gt;try rightclick on the desktop and then &quot;Show Desktop&quot;&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2020-04-27T17:26:29.747" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24303" PostTypeId="1" CreationDate="2020-04-27T17:31:26.187" Score="0" ViewCount="692" Body="&lt;p&gt;After setting a new theme in elementary-tweaks I'm now looking for a .css or configuration file to change the style of the text in the top panel and app menu to fit the style of the theme.&#xA;More precisely I would like it not to be bold, and even change the font, matching the title bar of the windows.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GNxJL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GNxJL.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22649" LastEditorUserId="22649" LastEditDate="2020-04-28T06:47:50.843" LastActivityDate="2024-01-09T14:05:30.843" Title="How to change text style of the top panel and app menu" Tags="|wingpanel|pantheon|gala|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24304" PostTypeId="1" CreationDate="2020-04-28T06:10:59.083" Score="0" ViewCount="54" Body="&lt;p&gt;So here's the thing. This component can't be updated from the app center. When I try to click the update button there's no response. It's a bug? or a missing component? This update always appear every time. The os is elementary OS 5.1.3 Hera.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6uPlg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6uPlg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's after I check with &lt;code&gt;sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hYoJR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hYoJR.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22655" LastEditorUserId="15904" LastEditDate="2020-05-07T12:30:38.887" LastActivityDate="2020-05-07T12:30:38.887" Title="Updates to system components BUG" Tags="|updates|release-hera|appcenter|bugs|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24305" PostTypeId="2" ParentId="24303" CreationDate="2020-04-28T06:17:32.843" Score="0" Body="&lt;p&gt;I think you should install elementary tweaks. And you can visit the previous question similar like these in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21512/is-elementary-tweaks-still-working-on-hera&quot;&gt;Here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22655" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-04-28T06:17:32.843" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24306" PostTypeId="2" ParentId="23930" CreationDate="2020-04-28T06:42:05.147" Score="0" Body="&lt;p&gt;You should check the Bluetooth first is it disabled or not installed.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl status bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and look the status, on my laptop, it was disabled because I don't use it.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; disabled; vendor preset: e&#xA;   Active: inactive (dead)&#xA;     Docs: man:bluetoothd(8)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To activate the bluetooth service do the command bellow.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl start bluetooth&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or if it doesn't help you. You can visit previous thread similar like these&lt;br&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/15329/reinstall-bluetooth-elementary-os&quot;&gt;Visit.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22655" LastActivityDate="2020-04-28T06:42:05.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24307" PostTypeId="1" AcceptedAnswerId="24328" CreationDate="2020-04-28T10:32:41.927" Score="0" ViewCount="40" Body="&lt;p&gt;Dose any body knows how to speed it up?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;OS:&#xA;   elementary OS 5.1.3 Hera&#xA;   uilt on Ubuntu 18.04.3 LTS&#xA;   Linux 5.3.0-28-generic&#xA;   GTK 3.22.30&#xA;hardware:&#xA;   Quad-Core Intel Core i7-8565U @ 1.80GHz&#xA;   16.2GB memory&#xA;   686GB storage (NVMe SSD)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22658" LastEditorUserId="22658" LastEditDate="2020-04-29T05:41:17.840" LastActivityDate="2020-04-29T14:22:18.350" Title="elementary os rouse with slow speed" Tags="|suspend|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24308" PostTypeId="1" CreationDate="2020-04-28T10:42:36.717" Score="0" ViewCount="305" Body="&lt;p&gt;Hello (: hope somebody can help me.&#xA;I made a boot USB with rufus on a windows PC, like it is described on the elementary OS homepage.&#xA;After booting on my xps 13 (ubuntu 18.04. LTS preinstalled), there appears the &quot;e&quot; icon. But immediately after that it shows me the ubuntu desktop with following information:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6OJ6F.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6OJ6F.jpg&quot; alt=&quot;Dell recovery Media&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="22652" LastActivityDate="2020-11-22T14:15:21.100" Title="not able to install elementary os (xps 13, 9300, developer edition)" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24310" PostTypeId="2" ParentId="24308" CreationDate="2020-04-28T13:06:56.057" Score="1" Body="&lt;p&gt;Select Legacy option in Boot List Option&#xA;Under Boot Sequence uncheck Diskette Drive option. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Disable Secure Boot&#xA;    To disable it, Go to Secure Boot &gt; Secure Boot Enable &gt; Select Disabled radio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now reboot the computer, and boot from your bootable device with Try Ubuntu without installation option&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install GParted application and delete first partition from it&#xA;Now you can able to install Ubuntu without any error&#xA;&lt;strong&gt;not sure whats on the first partition but I asume thats the recovery partition. Not sure if you need this. Please check before deleting&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;check: &lt;a href=&quot;https://askubuntu.com/questions/769634/error-this-recovery-media-only-functions-on-dell-and-alienware-systems&quot;&gt;https://askubuntu.com/questions/769634/error-this-recovery-media-only-functions-on-dell-and-alienware-systems&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2020-04-28T13:06:56.057" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24311" PostTypeId="2" ParentId="18745" CreationDate="2020-04-28T13:19:51.347" Score="0" Body="&lt;p&gt;I had the same issue, having two displays, one of them clockwise rotated / vertical. I noted a heavy annoying tearing on the rotated display while almost no tearing on the other.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I usually use chrome, chrome beta or chromium. &#xA;If you are using one of them go to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chrome://flags/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or directly to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;chrome://flags/#enable-resampling-scroll-events&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;set &lt;strong&gt;Enable resampling scroll events&lt;/strong&gt; to any enabled option. The performance and behavior of each option will be different for each hardware and screen rotation. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;For example what it performs best for me is &lt;strong&gt;Enabled linear_first&lt;/strong&gt; on my vertical display and &lt;strong&gt;Enabled linear_resampling&lt;/strong&gt; on my other one. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use chrome beta on the first one and chrome stable on the second one, so i set this options based on where i'm using it. If you are using a single instance of Chrome, set it to what fits best on your vertical screen (if one) as 90 and 270 grades rotated displays (vertical) performs worst on refresh rate than same display at 0 or 180º due to different refresh rate for X and Y axis.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Disclaimer:&lt;/strong&gt; The performance of this actions depends at the end on your hardware and its capabilities. I'm still having little issues using an intel hd integrated GPU on a laptop with two external displays attached even with this flags (not as many as i had without it but.. still annoying notable tearing).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;&#xA;I solved this issue on the latop by doing what i found on &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14341/eos-loki-video-tearing-with-intel-graphic-card&quot;&gt;this issue&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'll copy-paste it to keep all doc in the same place:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All credits to Sirajus Salekin and thanks for this:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a new file&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/X11/xorg.conf.d/20-intel_tearfree.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And paste this content inside,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Section &quot;Device&quot;&#xA;  Identifier  &quot;Intel Graphics&quot;&#xA;  Driver      &quot;intel&quot;&#xA;  Option      &quot;TripleBuffer&quot; &quot;true&quot;&#xA;  Option      &quot;TearFree&quot;     &quot;true&quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Reboot, should fix your problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If it doesn't solve it / you don't want to keep the changes, just remove the file by running&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /usr/share/X11/xorg.conf.d/20-intel_tearfree.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope it helps, even a little.&lt;/p&gt;&#xA;" OwnerUserId="22660" LastEditorUserId="22660" LastEditDate="2020-04-28T13:32:14.730" LastActivityDate="2020-04-28T13:32:14.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24312" PostTypeId="2" ParentId="24291" CreationDate="2020-04-28T13:52:42.843" Score="0" Body="&lt;p&gt;I had to set the WIFI password in the network settings on Security to be able to connect to it. &lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2020-04-28T13:52:42.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24313" PostTypeId="2" ParentId="24300" CreationDate="2020-04-28T15:21:36.713" Score="0" Body="&lt;p&gt;Machines on your local network don't automatically get DNS resolvable names assigned to them. You'd need to run a local DNS server or use something like &lt;a href=&quot;https://pi-hole.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;pihole&lt;/a&gt; for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An easier, more immediate fix however might be to simple add an entry into your /etc/hosts file like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;10.0.0.233      raspberrypi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;that will make your pi addressable by name on this particular machine. You'd need to add a similar entry to any other machine you want to access your pi by name with.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-28T15:21:36.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24314" PostTypeId="1" CreationDate="2020-04-28T15:35:21.183" Score="0" ViewCount="17" Body="&lt;p&gt;is there a way to enable full read/write for a journaled hfs+ hdd? (x noob, laptop, can't backup/convert fs/reformat)&lt;/p&gt;&#xA;" OwnerUserId="22663" LastActivityDate="2020-04-28T15:35:21.183" Title="Is there a way to enable full read/write for a hfs+ hdd? (x noob)" Tags="|filesystem|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24315" PostTypeId="1" CreationDate="2020-04-28T16:17:40.057" Score="0" ViewCount="117" Body="&lt;p&gt;When trying to install elementary ( first time) it boots, i go through the entire installation process, and then, when i restart the computer, it tells me to &quot;remove installation media and press enter&quot;. When i do so, the computer restarts and then tells me &quot; No bootable device found &quot;. I don't know why it does that, it seems like it hasn't installed it. I tried doing that without removing the usb drive but it just goes through the installation process again. I'm on a acer inspire btw&lt;/p&gt;&#xA;" OwnerUserId="22664" LastActivityDate="2024-01-10T05:01:00.170" Title="I can't install elementary and i'm stuck in an endless loop" Tags="|boot|acer|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24316" PostTypeId="1" CreationDate="2020-04-28T17:09:44.373" Score="1" ViewCount="87" Body="&lt;p&gt;I am using Zoom video chat and it works well except that every time I start a video call or join an existing one, Zoom and all other applications freeze and become unresponsive for a period of about 2 minutes. After this time, everything comes back and behaves well throughout the duration of the Zoom call.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am on 5.1.3 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed the .deb (&lt;a href=&quot;https://zoom.us/download?os=linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;) using&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo apt install ./zoom_amd64.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Anyone run into this issue? Or more generally does anyone have experience getting Zoom to behave well on Elementary? Perhaps with a different installation method or configuration.&lt;/p&gt;&#xA;" OwnerUserId="22666" LastActivityDate="2024-01-10T10:04:15.513" Title="Freezing &amp; nonresponsive after starting Zoom video chat" Tags="|release-hera|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24318" PostTypeId="1" CreationDate="2020-04-28T20:32:38.007" Score="0" ViewCount="151" Body="&lt;p&gt;is there a way to decrease the wingpanel's height? &#xA;I have tried looking into &lt;code&gt;/usr/share/themes/elementary/gtk-3.0/gtk-widgets.css&lt;/code&gt; and&#xA;&lt;code&gt;/usr/share/themes/elementary/gtk-3.0/apps.css&lt;/code&gt; but i cant really find anything in there.&lt;/p&gt;&#xA;" OwnerUserId="22671" LastActivityDate="2020-04-29T16:40:01.647" Title="How to adjust wingpanel's height" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24321" PostTypeId="1" CreationDate="2020-04-28T21:22:55.397" Score="0" ViewCount="49" Body="&lt;p&gt;New user to Linux and Elementary OS. I recently installed updates via the app store. The system will no longer restart. On a shut down the shut down sequence and start sequence are much slower. On a restart it shuts down but the system hangs during the boot sequence. I've tried running Boot Repair and gotten the following report&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://paste.ubuntu.com/p/rbcCvNNdwH/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://paste.ubuntu.com/p/rbcCvNNdwH/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be greatly appreciated. Definitely learned my lesson about not having a system backup!&lt;/p&gt;&#xA;" OwnerUserId="22674" LastActivityDate="2024-01-09T04:02:55.293" Title="System will boot but not restart after update" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24322" PostTypeId="2" ParentId="24321" CreationDate="2020-04-28T21:56:28.270" Score="0" Body="&lt;p&gt;Hi Grant, have you tried holding down the left shift key from a cold boot - it should show a list of previous builds so you can select the older build. I've have this before and recall it was a video driver issue. Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="22673" LastActivityDate="2020-04-28T21:56:28.270" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24323" PostTypeId="1" CreationDate="2020-04-28T23:56:43.977" Score="0" ViewCount="51" Body="&lt;p&gt;I just bought a cheapo Chuwi Herobook Pro that has Win10 pre-installed. set up eOS 5.1 on dual boot, all works but for wifi. My machines wifi is a Realtek rtl8723be which has known issues with Linux. Apparently it has two antenna slots but only one antenna connected, so sitting right next to the router I could see the router with one bar, but could not connect.&#xA;After trying all the fixes I could find I still had no wifi, so I closed the lid and left it be. Coming back later and logging in after suspend I had full wifi. So to test I shut down and restarted, and once again no wifi. Instead of closing the lid I just used the suspend option and the logged back in.&#xA;Sure enough, wifi is working. So now I have to boot up, log in, suspend out, log back in and I have wifi.&#xA;Any thoughts on how to fix this issue?&lt;/p&gt;&#xA;" OwnerUserId="22675" LastEditorUserId="15904" LastEditDate="2020-05-07T12:30:34.293" LastActivityDate="2024-01-17T21:06:50.833" Title="eOS 5.1 on new machine WIFI only works after suspend" Tags="|release-hera|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24324" PostTypeId="1" AcceptedAnswerId="24852" CreationDate="2020-04-29T08:12:08.203" Score="0" ViewCount="373" Body="&lt;p&gt;I want to type japanese characters but I can't setup japanese keyboard. I added new japanese language in settings but it seems that I only can type latin characters with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to use IBus, but it sounds like IBus doesn't override system-specified keyboard and I can't find any setting to set IBus as system-default keyboard manager.&lt;/p&gt;&#xA;" OwnerUserId="22676" LastActivityDate="2020-06-09T16:02:51.427" Title="Japanese keyboard" Tags="|keyboard|language|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24325" PostTypeId="1" CreationDate="2020-04-29T10:16:25.910" Score="0" ViewCount="36" Body="&lt;p&gt;When I click on the Sound setting it begins to open the panel but then immediately shuts down the System Settings panel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think this behaviour started after I installed Pulse Audio dlna and Pulse Audio Volume Control.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have tried reinstalling the Sound system setting, but this makes no difference to the behaviour.&lt;/p&gt;&#xA;" OwnerUserId="20899" LastActivityDate="2020-04-29T17:24:55.880" Title="Sound setting opens and then shuts immediately" Tags="|system|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24326" PostTypeId="1" AcceptedAnswerId="24332" CreationDate="2020-04-29T10:29:39.510" Score="1" ViewCount="286" Body="&lt;p&gt;When using Elementary (5.1.3) to stream music or video it goes to sleep after a while. I don't really want to change the power settings but would like Elementary to recognise when a stream is active and allow it to continue.&#xA;Other posts suggest solutions such as caffiene no longer work. Is there a way to get the behaviour I would like please?&#xA;With thanks in advance!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Steve&lt;/p&gt;&#xA;" OwnerUserId="20166" LastEditorUserId="15904" LastEditDate="2020-05-04T07:43:59.227" LastActivityDate="2020-05-04T07:43:59.227" Title="How to prevent sleep/suspend while streaming music and videos" Tags="|release-hera|suspend|audio|video-playback|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24328" PostTypeId="2" ParentId="24307" CreationDate="2020-04-29T14:22:18.350" Score="0" Body="&lt;p&gt;For what it's worth I think this behavior may be related to Ubuntu 18.04.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Looks like the same problem was reported &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7852/slow-resume-from-sleep?rq=1&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For what it's worth, your system isn't actually sleeping, it's suspending. I'd love to be told otherwise but it seems to me like Elementary doesn't actually properly support sleep but instead suspends your laptop.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-29T14:22:18.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24329" PostTypeId="2" ParentId="24326" CreationDate="2020-04-29T14:30:13.493" Score="0" Body="&lt;p&gt;What about something like &lt;a href=&quot;https://launchpad.net/keep.awake&quot; rel=&quot;nofollow noreferrer&quot;&gt;keep awake&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-04-29T14:30:13.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24330" PostTypeId="2" ParentId="24318" CreationDate="2020-04-29T16:40:01.647" Score="1" Body="&lt;p&gt;I used to modify the shadow of wingpanel in the older version never needed in newer version, you can look that one in apps.css.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you want some serious modification just install below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install wingpanel-slim elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;once install go to &lt;code&gt;System settings&lt;/code&gt; and look for &lt;code&gt;Tweaks&lt;/code&gt;. That should help you.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-04-29T16:40:01.647" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24331" PostTypeId="2" ParentId="24222" CreationDate="2020-04-29T17:02:45.097" Score="1" Body="&lt;p&gt;There are two ways you can change the language setting: &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;change &lt;code&gt;Keyboard&lt;/code&gt; Which you can change by &lt;code&gt;Alt+Shift&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;change &lt;code&gt;input method&lt;/code&gt; Which you can change by &lt;code&gt;Alt+Space&lt;/code&gt;(By default disabled)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Option one is easy even you can change at login-screen, But if you changed &lt;code&gt;input-method&lt;/code&gt; this you can't change at login-screen using &lt;code&gt;Alt+Space&lt;/code&gt; because ibus is not running by default, to fix that issue just press &lt;code&gt;Ctrl+Alt+F1&lt;/code&gt; or F2 login using your credentials and install below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ibus-m17n&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot and you should be able to change input-method at login screen using &lt;code&gt;Alt+Space&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-04-29T17:02:45.097" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24332" PostTypeId="2" ParentId="24326" CreationDate="2020-04-29T17:12:57.033" Score="3" Body="&lt;p&gt;This issue is more on lightdm, I've already explained this before so I won't explain further and rather I'll just put steps here, This problem is because the power settings are used from the gconf configuration of the user lightdm, and not the current user. Just test:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;su - -s /bin/bash lightdm&#xA;gsettings get org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If these returns &lt;code&gt;suspend&lt;/code&gt; then you can pass &lt;code&gt;nothing&lt;/code&gt; like below to change it and you should be good.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-launch gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type nothing&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;just ignore any output you get, &lt;code&gt;reboot&lt;/code&gt; to take in effect, In my experience OS update 3 weeks ago reverted this setting which was in place since last year, but same worked again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also just verify &lt;code&gt;power settings&lt;/code&gt; after reboot. incase you still having issues.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-04-29T17:12:57.033" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="24333" PostTypeId="2" ParentId="24325" CreationDate="2020-04-29T17:24:55.880" Score="1" Body="&lt;p&gt;This is known issue since long time, even sometimes you just load-module reacts same way, Simple way to fix it make sure your dlna module is disabled in &lt;code&gt;/etc/pulse/default.pa&lt;/code&gt; just comment it if not commented. Let me know if that doesn't work I'll provide &lt;code&gt;default.pa&lt;/code&gt; file&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-04-29T17:24:55.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24335" PostTypeId="1" CreationDate="2020-04-29T18:01:39.397" Score="0" ViewCount="126" Body="&lt;p&gt;I used various guides to change the date and time format on the top system bar and I found nothing working. How can I edit the date and time format in elementary os 5? I would like something like that (% d.% M.% Y -% H:% M:% S)&lt;/p&gt;&#xA;" OwnerUserId="22681" LastEditorUserId="15904" LastEditDate="2020-05-07T12:30:27.400" LastActivityDate="2020-05-07T12:30:27.400" Title="Custom date and time format - Elementary OS 5" Tags="|release-hera|settings|time|clock|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24336" PostTypeId="2" ParentId="342" CreationDate="2020-04-29T20:13:44.163" Score="5" Body="&lt;p&gt;Detailed step by step guide of how I accomplished the desired behavior:&lt;/p&gt;&#xA;&lt;p&gt;Download/clone &lt;strong&gt;the fork&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;git clone https://github.com/jibbo/gala-elementary-alt-tab-switcher&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install dependencies:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install cmake build-essential valac libgala-dev libwnck-3-dev libgranite-dev&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Execute the commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd gala-elementary-alt-tab-switcher&#xA;mkdir build&#xA;cd build&#xA;cmake -DCMAKE_INSTALL_PREFIX=/usr ..&#xA;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;Reboot&lt;/em&gt; because just executing &lt;code&gt;gala --restart&lt;/code&gt; most likely will not suffice&lt;/p&gt;&#xA;&lt;p&gt;Optional but strongly suggested customization:&#xA;&lt;code&gt;sudo apt install dconf-editor&lt;/code&gt;. Open the dconf-editor and search for &lt;em&gt;elementary-alt-tab&lt;/em&gt;. Setup the config as following (if you like my settings):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;active-element-scale 1&#xA;all-workspaces off&#xA;always-on-primary-monitor off&#xA;animate off&#xA;caption-visible off (the text is looking rather ugly)&#xA;dektop-icon-in-switcher off&#xA;desktop-in-switcher off&#xA;icon-opacity 255&#xA;icon-size 48 (64 is pretty good too)&#xA;inactive-element-scale 1&#xA;indicator-background-color '#ECEFF4'&#xA;indicator-border 4&#xA;indicator-round-radius 4&#xA;indicator-stroke-width 0&#xA;preview-in-switcher off&#xA;wrapper-background-color rgba(46, 52, 64, 1)&#xA;wrapper-padding 16&#xA;wrapper-round-radius 8&#xA;wrapper-spacing 8&#xA;wrapper-stroke-width 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Tested on &lt;em&gt;elementary os 5.1.3 Hera&lt;/em&gt; - pleasant performance and no crashes: &lt;a href=&quot;https://postimg.cc/47QvYcSM&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.postimg.cc/tTLBmttX/switcher.png&quot; alt=&quot;switcher.png&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;UPDATE:&#xA;Since elementary 6.1 a similar alt-tab switcher is provided by default. Note: in some cases it can cause lagging upon pressing &lt;code&gt;Alt + Shift + Tab&lt;/code&gt;, personally I've solved the issue via setting &lt;em&gt;Keyboard -&amp;gt; Switch Layout -&amp;gt; Both Shift keys together&lt;/em&gt; option.&lt;/p&gt;&#xA;" OwnerUserId="643" LastEditorUserId="643" LastEditDate="2022-01-12T10:34:09.253" LastActivityDate="2022-01-12T10:34:09.253" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24337" PostTypeId="2" ParentId="24315" CreationDate="2020-04-29T20:46:59.207" Score="0" Body="&lt;p&gt;If it is it a dual boot probably /boot/efi partition is not created. I recommend to manually create partitions &#xA;/ - 50 - 100 GB&#xA;/boot/efi - 1024 - 2048 MB&#xA;/home - 50 - 100 GB&#xA;/var - 25 - 50 GB&#xA;/swap - 8192 MB&#xA;Other partitions can be created but it is not necessary.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-29T20:46:59.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24338" PostTypeId="2" ParentId="9706" CreationDate="2020-04-29T21:01:43.137" Score="0" Body="&lt;p&gt;You can eventually try to use some Linux live from usb stick, install on this usb live Linux boot repair - look for in Google how to and run this tool. Eventually it may need additional small partition mounted as /boot for Elementary OS. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-04-29T21:01:43.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24339" PostTypeId="1" CreationDate="2020-04-30T00:07:33.480" Score="0" ViewCount="54" Body="&lt;p&gt;I have downloaded and installed R and R Commander from App Center (can't find Rstudio in App Center so wasn't able to install this). The apps installed without error messages and is listed in the installed apps in AppCenter. But when clicked, nothing happens, apps doesnt open. Using Hera 5.1.3 and an older HP Laptop Probook 4445s. I have no issues with installed productivity apps from appcenter, snap and flatpak.  &lt;/p&gt;&#xA;" OwnerUserId="22682" LastActivityDate="2024-01-29T05:00:45.110" Title="R and R Commander in App Center installs but doesnt load or open" Tags="|release-hera|applications|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24341" PostTypeId="2" ParentId="24339" CreationDate="2020-04-30T05:36:29.283" Score="0" Body="&lt;p&gt;A couple of months ago, I also have a problem like that, when I download and install the game from the app center, the game appears on apps list but when I play that game nothing happens it's like automatically exit. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe you can run those apps from the terminal and see the error output or anything like that. And then post the SS here. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;or you can try to install the app from PPA repository.&lt;/p&gt;&#xA;" OwnerUserId="22655" LastActivityDate="2020-04-30T05:36:29.283" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24342" PostTypeId="2" ParentId="24316" CreationDate="2020-04-30T06:11:19.053" Score="0" Body="&lt;p&gt;I've use zoom almost every day, and it's working pretty well. You should try to purge that zoom first and install it with Eddy.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can download Eddy from the app center just search Eddy. These apps will install all your .deb files automatically. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or maybe you can see the task processes on command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;htop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and see how much zoom eats your resources. Freezing apps probably happen when your memory doesn't have enough resources to run the program.&lt;/p&gt;&#xA;" OwnerUserId="22655" LastActivityDate="2020-04-30T06:11:19.053" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24348" PostTypeId="1" CreationDate="2020-05-01T02:06:40.500" Score="0" ViewCount="406" Body="&lt;p&gt;I have the Power settings &quot;for plugged in&quot; with external monitor connected for it to &quot;do nothing&quot; when the lid is closed.  See the attached screenshot.  However, my laptop still goes to sleep and I can not wake it up without opening the lid.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/t4ET8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t4ET8.png&quot; alt=&quot;Screenshot of Power Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22685" LastEditorUserId="15904" LastEditDate="2020-05-02T01:06:01.883" LastActivityDate="2024-01-14T08:04:00.493" Title="Laptop will not wake from sleep with the lid closed with elementary OS 5.1.3 Hera" Tags="|release-hera|suspend|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24349" PostTypeId="1" CreationDate="2020-05-01T03:08:17.847" Score="0" ViewCount="113" Body="&lt;p&gt;The numeric keypad on the right side of my keyboard does not appear to work under elementary OS 5.1.3.  I checked the keyboard settings and there does not appear to be any settings related to this.  I searched this site and it appears that in an earlier version of elementary, there was a keyboard setting (described here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/373/how-do-i-enable-numlock-at-login/375#375&quot;&gt;How do I enable NumLock at login?&lt;/a&gt;) but that setting no longer appears in the keyboard setting.&lt;/p&gt;&#xA;" OwnerUserId="22685" LastActivityDate="2020-05-04T18:11:12.637" Title="How do i enable the numeric keys (on the right side of my keyboard) under elementary OS 5.1.3" Tags="|release-hera|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24354" PostTypeId="1" CreationDate="2020-05-01T16:31:46.293" Score="2" ViewCount="173" Body="&lt;p&gt;I am new to Elementary OS, I have just installed it two days ago, Some reason my wifi disconnects after few minutes. I am using dell inspiron 7000. I never has this issue in Ubuntu before.&lt;/p&gt;&#xA;" OwnerUserId="22703" LastActivityDate="2024-01-01T12:07:10.863" Title="Wifi keep disconnecting" Tags="|wifi|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24355" PostTypeId="1" CreationDate="2020-05-01T17:36:47.970" Score="1" ViewCount="107" Body="&lt;p&gt;This happens often that keyboard shortcuts stop working like volume control, screenshot, etc., and it start working again when I reboot system. this issue started from last month only, never had this issue before. When I press &quot;Window&quot; button it pop-up with list of shortcuts as usual but shortcuts doesn't work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Again as I said all starts working after reboot. only pain is that you're working on something and you want to take screenshot and doesn't work and you've to reboot.&lt;/p&gt;&#xA;" OwnerUserId="19583" LastActivityDate="2024-03-21T13:06:05.693" Title="Keyboard shortcut stop working" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24362" PostTypeId="1" CreationDate="2020-05-01T23:28:32.683" Score="0" ViewCount="125" Body="&lt;p&gt;I have an HP EliteBook 8540w (2010 model with i5 and 8GB of RAM, nVidia) with multiboot (Ubuntu 19.10, Elementary Hera, Mint 19.2, Manjaro 18 and Windows 10).&#xA;For the last month or so, I have severe problems with Suspend with most of the Linuxes that I use. Surprisingly, right now only Win10 supends and resumes fine...&#xA;The behaviour in Elementary: When I suspend (either from the Power button or withh systemctl suspend or sudo pm-suspend) it sems to suspend allright but, when try to resume, all the leds open, fan runs, display backlight lits up but it does not give me an interface to use. ALt Ctrl F1 (or F*) does nothing.&#xA;It does not seem to be a graphics issue since I tried to suspend and resume from console (ALt Ctrl F1, login and then systemctl suspend or pm-suspend) but it does the same: at best, it gives me an unresponsive console screen at the point I suspended and the only thing I can do is long press the Power button for a hard shutdown.&#xA;I tried both X.org and proprietory nVidia drivers with same results, with slight variations, but basically the same result.&#xA;Journalctl stops at the suspend stage: there are no lines after that to help me debug the resume issue.&#xA;Any suggestion on how to debug this very annoying behaviour? For my type of use (mostly on battery with frequent pauses where I need to put it to sleep and resume my work few minutes or hours later), it makes it very inconvenient and frustrating.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you in advance for your help,&#xA;Stavros&lt;/p&gt;&#xA;" OwnerUserId="13999" LastActivityDate="2024-01-12T18:08:21.003" Title="Suspend resume problem" Tags="|release-hera|suspend|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24363" PostTypeId="1" CreationDate="2020-05-02T00:21:56.343" Score="1" ViewCount="168" Body="&lt;p&gt;Dell Precision 3541 machine came with Ubuntu preloaded.  Can not get Elementary OS to boot in UEFI mode.  Looks like it loading from USB. Elementary OS logo pops up and says &quot;Try or install elementary OS&quot; at bottom it says &quot;enter: boot &lt;code&gt;e' options&lt;/code&gt;c' command line&quot;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enter and Elementary OS logo reappears for a moment.  The looks like Ubuntu takes over shows a window with Dell logo that says &quot;This Dell Recovery Media can be use to restore the original factory software.  It is recommended you back up all important data before running this too.  ERROR: This recovery media only functions on Dell and alientware systems purchased with Ubuntu&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;C takes me to grub command line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E takes me to a terminal looking screen titled &quot;GNU GRUB VERSION 2.02&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Boot Sequence: From USB&#xA;UEFI Boot Path Security: None&#xA;USB Configuration: Enable USB Boot Support and Enable External USB Port both checked.&#xA;Secure Boot: Secure Boot Enable not checked.&#xA;Secure Boot Mode: Audit Mode&#xA;SATA Operation: AHCI&#xA;No options for legacy boot found anywhere.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="20206" LastActivityDate="2020-11-09T19:42:22.060" Title="Can't Install Elementary OS Hera on Dell Precision 3541" Tags="|system-installation|uefi|dell|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24364" PostTypeId="1" CreationDate="2020-05-02T05:36:29.953" Score="1" ViewCount="297" Body="&lt;p&gt;I want to dual boot Windows 10 and Elementary OS 5.1.3 on my Dell Inspiron 13 7391 2 in 1. I was able to run and seemingly complete the installation process from USB, however, when I attempt to run the installation entry &lt;code&gt;ubuntu&lt;/code&gt; from my system's boot menu, I get a loud beep and my system begins running hardware memory diagnostics. This does not happen when booting Windows 10. I was unable to find any &lt;code&gt;ubuntu&lt;/code&gt; folder created in my EFI partition when I browsed it using my BIOS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have heard that this may possibly be a problem with compatibility with Intel RAID hard drive technology (instead of AHCI). (Note: BitLocker came enabled by default on my hard drive.) However, when I attempted to switch my system to AHCI mode, it triggered an automatic repair when booting Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advice in terms of getting Windows 10 and Elementary OS to boot successfully together? Or is Elementary OS simply not compatible with my hardware? Thanks in advance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: A reinstall with 5.1.4 allowed me to boot into a Grub menu that could not read any partitions on my hard drive other than EFI. Booting the Elementary OS live CD and running &lt;code&gt;boot-repair&lt;/code&gt; returned my system to the state where it beeps and starts running diagnostics when attempting to boot the &lt;code&gt;ubuntu&lt;/code&gt; boot entry. While in the Elementary OS live CD, I noticed that gparted correctly recognized the install partition, but Windows still sees it as allocated space. When attempting to mount the EFI partition in Windows, Powershell reports that the files in the ubuntu directory are unreadable.&lt;/p&gt;&#xA;" OwnerUserId="22714" LastEditorUserId="22714" LastEditDate="2020-05-03T04:58:07.017" LastActivityDate="2024-02-09T04:06:15.740" Title="Installing Elementary OS on Dell Inspiron 13 7391 2 in 1" Tags="|system-installation|boot|dual-boot|uefi|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24365" PostTypeId="1" AcceptedAnswerId="24776" CreationDate="2020-05-02T07:41:45.140" Score="0" ViewCount="226" Body="&lt;p&gt;I would like to delete the account because I'm not using it anymore.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In user's account setting...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;the only option I see is &lt;strong&gt;Disable User Account&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YosFk.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YosFk.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I permanently &lt;strong&gt;Delete&lt;/strong&gt; the user?&lt;/p&gt;&#xA;" OwnerUserId="20508" LastActivityDate="2020-06-02T12:46:22.787" Title="How can I Delete a users(not just disable)" Tags="|settings|user|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24367" PostTypeId="1" CreationDate="2020-05-02T09:51:25.880" Score="0" ViewCount="351" Body="&lt;p&gt;I know my hardware doesn't work with Ubuntu 18.04, but it does work with 20.04. I know Elementary 5.1 'updated' the kernel, but it's not stated what version it updated to.&lt;/p&gt;&#xA;" OwnerUserId="22717" LastActivityDate="2020-05-02T14:36:18.983" Title="What kernel version does Elementary 5.1 use?" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24368" PostTypeId="2" ParentId="24348" CreationDate="2020-05-02T11:30:38.927" Score="0" Body="&lt;p&gt;Perhaps this could be related to this bug: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22662" LastActivityDate="2020-05-02T11:30:38.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24369" PostTypeId="2" ParentId="24362" CreationDate="2020-05-02T11:43:36.733" Score="0" Body="&lt;p&gt;Perhaps related to these:&#xA;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&lt;/a&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you also add to the issue on github maybe it will get more attention! :)&lt;/p&gt;&#xA;" OwnerUserId="22662" LastActivityDate="2020-05-02T11:43:36.733" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24373" PostTypeId="2" ParentId="24367" CreationDate="2020-05-02T14:36:18.983" Score="1" Body="&lt;p&gt;It uses version 5.3.0-51 when eos is up to date.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-02T14:36:18.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24375" PostTypeId="1" CreationDate="2020-05-02T15:59:55.377" Score="0" ViewCount="187" Body="&lt;p&gt;I've recently installed the elementary OS 5.1 Hera, Amazon Prime Videos will not work, they just&lt;/p&gt;&#xA;" OwnerUserId="22721" LastEditorUserId="3373" LastEditDate="2020-06-18T13:40:57.827" LastActivityDate="2020-06-18T13:40:57.827" Title="Amazon prime video not working" Tags="|release-hera|firefox|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24377" PostTypeId="2" ParentId="24365" CreationDate="2020-05-02T18:41:16.247" Score="1" Body="&lt;p&gt;You could try old school, text terminal approach: &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;deluser [options] &amp;lt;user&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Try &lt;code&gt;man deluser&lt;/code&gt; first to get more information.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Certainly one should remove users while having administrator privileges, so either &lt;code&gt;su -&lt;/code&gt; or &lt;code&gt;sudo&lt;/code&gt; would be handy, too.&lt;/p&gt;&#xA;" OwnerUserId="22532" LastActivityDate="2020-05-02T18:41:16.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24381" PostTypeId="1" CreationDate="2020-05-03T11:01:37.590" Score="0" ViewCount="549" Body="&lt;p&gt;There may any one help me with a laptop choice because am new to elemental os &lt;/p&gt;&#xA;" OwnerUserId="22734" LastActivityDate="2020-05-04T08:04:16.803" Title="Best laptop for elemental os" Tags="|hardware|" AnswerCount="3" CommentCount="0" ClosedDate="2020-07-03T04:37:40.480" ContentLicense="CC BY-SA 4.0" />
  <row Id="24383" PostTypeId="2" ParentId="24381" CreationDate="2020-05-03T13:09:12.307" Score="2" Body="&lt;p&gt;There aren't many laptops that have any sort of official support for elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are brands of laptops that come with a Linux distribution pre-installed. Those likely also work fine with elementary OS. For example:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://entroware.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://entroware.com/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://slimbook.es/en/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://slimbook.es/en/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://system76.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://system76.com/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The majority of laptops that come with Windows preinstalled can run Linux distributions like elementary OS with little to no problems. Some may require additional fixes to get Wi-Fi and such working. Very new laptop models that come with cutting-edge hardware might not fully function on Linux (yet) or require you to install a newer Linux kernel.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To find information about the compatibility of a specific laptop model you'll have to do some research yourself, and/or ask the manufacturer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;elementary OS is based on Ubuntu, so if a laptop works well with Ubuntu, it likely works well with elementary OS as well.&lt;/p&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2020-05-03T13:09:12.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24385" PostTypeId="2" ParentId="21686" CreationDate="2020-05-03T13:59:48.893" Score="0" Body="&lt;p&gt;You can try with &lt;a href=&quot;https://www.npmjs.com/package/linux-window-session-manager&quot; rel=&quot;nofollow noreferrer&quot;&gt;lwsm&lt;/a&gt;. It will save the current window session state after issuing &lt;code&gt;lwsm save&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You will have to install node for that:&#xA;&lt;code&gt;sudo apt-get install nodejs&lt;/code&gt;&lt;br&gt;&#xA;...next install it with &lt;code&gt;npm install linux-window-session-manager&lt;/code&gt;.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open up your windows and save them with &lt;code&gt;lwsm save&lt;/code&gt;.&lt;br&gt;&#xA;Then you just need to make sure you load it on startup.&#xA;Go to: System settings -&gt; Applications -&gt; Startup tab&#xA;and choose Add -&gt; Custom command and type &lt;code&gt;lwsm restore&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot and voila :)&lt;/p&gt;&#xA;" OwnerUserId="22668" LastActivityDate="2020-05-03T13:59:48.893" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24387" PostTypeId="2" ParentId="20783" CreationDate="2020-05-03T17:45:32.777" Score="0" Body="&lt;p&gt;I think i have got a solution to the problem. When I started VLC from the commandline (terminal), all the erros went there instead of filling up my disk.&lt;/p&gt;&#xA;" OwnerUserId="22743" LastActivityDate="2020-05-03T17:45:32.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24388" PostTypeId="2" ParentId="24381" CreationDate="2020-05-03T18:36:23.587" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://puri.sm/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://puri.sm/&lt;/a&gt; will prob work fine since it comes with PureOS pre-installed, which is also a fork of Ubuntu afaik.&lt;/p&gt;&#xA;" OwnerUserId="22662" LastActivityDate="2020-05-03T18:36:23.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24389" PostTypeId="1" CreationDate="2020-05-03T19:19:22.007" Score="0" ViewCount="166" Body="&lt;p&gt;I am noob about ubuntu. Yesterday I installed the latest version of elementary os. my laptop is dell inspiron 5591-2n1. Wifi is intel wireless ac 9560. There is no wifi option. I can't turn it on/off. no available wifi's. It seems like there are no drivers installed but I'm pretty sure all drivers are installed. What can I do?&lt;/p&gt;&#xA;" OwnerUserId="22745" LastActivityDate="2020-05-03T22:38:06.977" Title="No wireless toggle. All drivers are installed, but there is no wifi" Tags="|settings|wifi|drivers|internet|" AnswerCount="0" CommentCount="39" ContentLicense="CC BY-SA 4.0" />
  <row Id="24390" PostTypeId="2" ParentId="21323" CreationDate="2020-05-03T20:19:34.307" Score="0" Body="&lt;p&gt;I find it goes away after I reboot and &quot;check updates&quot; again.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-05-03T20:19:34.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24391" PostTypeId="1" CreationDate="2020-05-03T21:34:09.583" Score="0" ViewCount="79" Body="&lt;p&gt;I'm still learning about linux, so I don't know how to fix it, but I'll explain what happened&#xA;I just did dual boot, put / on ssd and /home on hdd ...&#xA;I used ISO 5.1.4 Hera&#xA;When I first opened the store:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/d5jkk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d5jkk.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20020" LastActivityDate="2024-01-15T21:03:35.410" Title="I can't update after installing 5.1.4" Tags="|updates|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24396" PostTypeId="2" ParentId="24348" CreationDate="2020-05-04T00:15:09.927" Score="0" Body="&lt;p&gt;I came up with a solution.  If I go to the &quot;Security &amp;amp; Privacy&quot; settings and go to the Locking tab and set &quot;Lock on suspend&quot; and &quot;Lock after screen turns off&quot; both to OFF, I can wake my laptop back up without having to open the laptop lid.&lt;/p&gt;&#xA;" OwnerUserId="22685" LastActivityDate="2020-05-04T00:15:09.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24398" PostTypeId="2" ParentId="24375" CreationDate="2020-05-04T03:24:11.683" Score="1" Body="&lt;p&gt;I managed to solve the problem, the issue was installing the package using snap, it almost seemed like websites thought I was logging on from a mobile device. When I deleted it and reinstalled using apt it worked fine, this was also  problem with a fps game I installed with snap as well &lt;/p&gt;&#xA;" OwnerUserId="22721" LastActivityDate="2020-05-04T03:24:11.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24399" PostTypeId="2" ParentId="24381" CreationDate="2020-05-04T08:04:16.803" Score="1" Body="&lt;p&gt;For what is worth, I have a Dell XPS 9550 and elementary OS works perfectly out of the box on it. Everything like WiFi, F keys, touchpad, Bluetooth, external ports... not a single problem or additional drivers needed.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-05-04T08:04:16.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24400" PostTypeId="1" CreationDate="2020-05-04T09:26:16.957" Score="0" ViewCount="2122" Body="&lt;p&gt;i'm trying out flatpak.&#xA;The only app I have trouble with is firefox.&#xA;After starting it, it creates 2 icons in dock. They both show the firefox logo but one is more blurry than the other. &#xA;The blurry one is the one with the blue point on it, indicating I have one instance running.&#xA;The sharp icon disappears a few seconds after starting firefox.&#xA;But when I right-click the blurry icon all I can do is close the window whereas I expect to see multiple options like &quot;new window&quot; and such. Likewise clicking this icon with the middle-mouse doesn't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This does not happen when installing firefox via apt. &#xA;I get one sharp icon that contains all the expected options upon right clicking.&#xA;This does also not happen with any different apps I installed via flatpak. &#xA;They all only create one sharp icon upon starting with the expected options upon rightlicking the icon.&lt;/p&gt;&#xA;" OwnerUserId="22752" LastActivityDate="2022-03-17T11:30:50.933" Title="Starting firefox installed via flatpak creates two icons in task bar" Tags="|plank|firefox|flatpak|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24401" PostTypeId="1" CreationDate="2020-05-04T09:33:56.477" Score="0" ViewCount="405" Body="&lt;pre&gt;&lt;code&gt;**apt update**&#xA;&#xA;E: http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease is not (yet) available (Could not connect to ppa.launchpad.net:80 (2001:67c:1560:8008::15). - connect (101: Network is unreachable) Could not connect to ppa.launchpad.net:80 (91.189.95.83), connection timed out)&#xA;E: http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease is not (yet) available (Unable to connect to ppa.launchpad.net:http:)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I checked the sources.list but couldn't find it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All of these started when i tried to install&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install software-properties-common&#xA;[sudo] password for abhar:         &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  fwupd fwupd-signed fwupdate-signed libfwupd2 libido3-0.1-0 libqt5positioning5 libqt5printsupport5 libqt5qml5&#xA;  libqt5quick5 libqt5sensors5 libqt5webchannel5 libqt5webkit5 libsmbios-c2 libxmlb1 phantomjs python3-pyxattr&#xA;  rtmpdump&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following additional packages will be installed:&#xA;  python3-software-properties&#xA;The following NEW packages will be installed:&#xA;  python3-software-properties software-properties-common&#xA;0 upgraded, 2 newly installed, 0 to remove and 1 not upgraded.&#xA;Need to get 143 kB of archives.&#xA;After this operation, 614 kB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] &#xA;Ign:1 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic/main amd64 python3-software-properties all 0.96.24.32.12+elementary17~ubuntu5.1.1&#xA;Ign:2 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic/main amd64 software-properties-common all 0.96.24.32.12+elementary17~ubuntu5.1.1&#xA;Err:1 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic/main amd64 python3-software-properties all 0.96.24.32.12+elementary17~ubuntu5.1.1&#xA;  Could not connect to ppa.launchpad.net:80 **(2001:67c:1560:8008::15)**. - connect (101: Network is unreachable) Could not connect to ppa.launchpad.net:80 (91.189.95.83), connection timed out&#xA;Err:2 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic/main amd64 software-properties-common all 0.96.24.32.12+elementary17~ubuntu5.1.1&#xA;  Unable to connect to ppa.launchpad.net:http:&#xA;E: Failed to fetch http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/pool/main/s/software-properties/python3-software-properties_0.96.24.32.12+elementary17~ubuntu5.1.1_all.deb  Could not connect to ppa.launchpad.net:80 (2001:67c:1560:8008::15). - connect (101: Network is unreachable) Could not connect to ppa.launchpad.net:80 (91.189.95.83), connection timed out&#xA;E: Failed to fetch http://ppa.launchpad.net/elementary-os/os-patches/ubuntu/pool/main/s/software-properties/software-properties-common_0.96.24.32.12+elementary17~ubuntu5.1.1_all.deb  Unable to connect to ppa.launchpad.net:http:&#xA;E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22754" LastEditorUserId="22754" LastEditDate="2020-05-04T09:40:59.420" LastActivityDate="2020-07-03T20:21:45.477" Title="failed fetching updates failed" Tags="|updates|appcenter|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24402" PostTypeId="1" CreationDate="2020-05-04T10:11:53.943" Score="2" ViewCount="78" Body="&lt;p&gt;I run slack as a snap application.&#xA;To recognize and adjust slack notifications I changed .desktop properties. According &lt;a href=&quot;https://forum.snapcraft.io/t/overriding-desktop-files-on-ubuntu-snaps/6599&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link&lt;/a&gt;, I added X-GNOME-UsesNotifications=true in /var/lib/snapd/desktop/applications/slack_slack.desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, in notifications settings I see the slack application and I can change the bevaviour for slack. But the slack-notifications are still received with &quot;others&quot; instead &quot;slack&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I change? Is there a possibility?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;--- Installed elementary OS: 5.1.4 Hera&lt;/p&gt;&#xA;" OwnerUserId="21156" LastEditorUserId="21156" LastEditDate="2020-05-04T11:39:46.210" LastActivityDate="2020-05-04T11:39:46.210" Title="Notifications as &quot;others&quot; instead of App itselfs (snap application)" Tags="|release-hera|notifications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24403" PostTypeId="1" AcceptedAnswerId="24423" CreationDate="2020-05-04T11:01:51.567" Score="0" ViewCount="113" Body="&lt;p&gt;How could I add &quot;compact&quot; view for file manager? &#xA;I mean small icons and a file names, or even  file names alone (no icon).&lt;/p&gt;&#xA;" OwnerUserId="22532" LastActivityDate="2020-05-05T09:35:41.767" Title="How to add compact-view for file manager?" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24404" PostTypeId="1" CreationDate="2020-05-04T12:05:09.273" Score="0" ViewCount="25" Body="&lt;p&gt;when I unplug my netbook, I can use my keyboard.&#xA;I can write my password on login screen, but nothing on the softwares (firefox, mail etc...)&#xA;I must close and open the session for my keyboard is OK&#xA;I'm on eos 5.1 (Atom N450, 2gb of ram, model ACER D255)&lt;/p&gt;&#xA;" OwnerUserId="22742" LastEditorUserId="15904" LastEditDate="2020-05-07T12:30:31.053" LastActivityDate="2024-01-18T08:04:45.617" Title="No keyboard if I unplug the charger on my netbook" Tags="|release-hera|keyboard|battery|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24405" PostTypeId="1" AcceptedAnswerId="24410" CreationDate="2020-05-04T14:54:58.033" Score="4" ViewCount="994" Body="&lt;p&gt;Today when I launched system settings app I found out that dark mode doesn't work in it&lt;a href=&quot;https://i.stack.imgur.com/Yx8Xu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Yx8Xu.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But in other applications it works. For example - file explorer&lt;a href=&quot;https://i.stack.imgur.com/ABy8y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ABy8y.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22755" LastActivityDate="2020-08-27T11:09:46.400" Title="Dark mode doesn't work in system settings" Tags="|settings|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24406" PostTypeId="2" ParentId="24404" CreationDate="2020-05-04T15:33:19.250" Score="0" Body="&lt;p&gt;This could be a USB power issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Depending on what kind of keyboard you have, it's possible that it's drawing more voltage than your Netbook can handle when not plugged in.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You might consider using a powered USB hub. I like the ones &lt;a href=&quot;https://plugable.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Plugable&lt;/a&gt; provides since they were recommended to me a while back as being unusual in that they provide really solid power (not always a given among hubs apparently.)&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-05-04T15:33:19.250" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24407" PostTypeId="2" ParentId="24401" CreationDate="2020-05-04T15:36:03.513" Score="1" Body="&lt;p&gt;There's also the /etc/apt/sources.list.d as well. Each file in that directory can contain other repositories your system will search.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check there to see if you're referencing an outdated repo.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-05-04T15:36:03.513" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24409" PostTypeId="2" ParentId="24349" CreationDate="2020-05-04T18:11:12.637" Score="1" Body="&lt;p&gt;Stupid me.  The num lock key wasn't set.&lt;/p&gt;&#xA;" OwnerUserId="22685" LastActivityDate="2020-05-04T18:11:12.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24410" PostTypeId="2" ParentId="24405" CreationDate="2020-05-04T18:38:27.593" Score="2" Body="&lt;p&gt;Similar issue here, Has to do something with the new update, I know they've been working on dark mode override(per app dark mode preference). But still, have to wait for official statement.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-05-04T18:38:27.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24411" PostTypeId="2" ParentId="24007" CreationDate="2020-05-04T18:55:46.637" Score="0" Body="&lt;p&gt;Reboot... Nothing I tried worked until I rebooted. After a reboot, Mail displays properly. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;--original post--&#xA;No idea, but the same thing is happening to me. I'll update if I find a fix... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently I'm stuck trying to reset pantheon-mail completely. I can't remove the last account. I've deleted the following folder: &lt;strong&gt;~/.local/share/pantheon-mail&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've also deleted &lt;strong&gt;~/.local/share/geary&lt;/strong&gt; and &lt;strong&gt;~/.local/share/evolution&lt;/strong&gt; for good measure. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've removed and reinstalled using apt and -f, etc. &lt;/p&gt;&#xA;" OwnerUserId="22539" LastEditorUserId="22539" LastEditDate="2020-05-04T19:27:47.090" LastActivityDate="2020-05-04T19:27:47.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24413" PostTypeId="2" ParentId="21391" CreationDate="2020-05-04T19:04:07.977" Score="0" Body="&lt;p&gt;Tried this and didn't have any luck. That stubborn account was still there. I ended up adding another account and removing the problem account. Then, I found that Mail is still not displaying any messages, just the folders and unread counts. &lt;/p&gt;&#xA;" OwnerUserId="22539" LastActivityDate="2020-05-04T19:04:07.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24414" PostTypeId="2" ParentId="22051" CreationDate="2020-05-04T20:02:46.517" Score="1" Body="&lt;p&gt;That is because of snap version ...I don't have it also but I use Ubuntu 20.04 LTS...with normal version of firefox no problems at all...&lt;/p&gt;&#xA;" OwnerUserId="22763" LastActivityDate="2020-05-04T20:02:46.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24415" PostTypeId="2" ParentId="19104" CreationDate="2020-05-04T20:33:13.233" Score="0" Body="&lt;p&gt;I can address the copy/paste situation, but the Latin issue may require a more in-depth resolution that involves learning xkb and will be outside the scope of my answer as I have not worked that much with providing compose key or multi-language support.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For copy and paste to work with Juno or most any distro you can use &lt;a href=&quot;https://github.com/mooz/xkeysnail&quot; rel=&quot;nofollow noreferrer&quot;&gt;xkeysnail&lt;/a&gt; or use my &lt;a href=&quot;https://github.com/rbreaves/kinto&quot; rel=&quot;nofollow noreferrer&quot;&gt;kinto&lt;/a&gt; app which will use either xkeysnail or xkb to setup keymap switching like you are wanting.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;A short example of some remapping I do with it, but you will need the entirety of kinto if you want it to fully configure things for you as it will also setup xkeysnail as a systemd service, something xkeysnail will not do and the complete kinto.py config file will manage several different keymaps for the proper apps by default.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;# -*- coding: utf-8 -*-&#xA;&#xA;import re&#xA;from xkeysnail.transform import *&#xA;&#xA;terminals = [&quot;gnome-terminal&quot;,&quot;konsole&quot;,&quot;io.elementary.terminal&quot;,&quot;terminator&quot;,&quot;sakura&quot;,&quot;guake&quot;,&quot;tilda&quot;,&quot;xterm&quot;,&quot;eterm&quot;,&quot;kitty&quot;]&#xA;terminals = [term.casefold() for term in terminals]&#xA;termStr = &quot;|&quot;.join(str(x) for x in terminals)&#xA;&#xA;define_conditional_modmap(lambda wm_class: wm_class.casefold() not in terminals,{&#xA;    # Default Mac/Win&#xA;    Key.LEFT_ALT: Key.RIGHT_CTRL,   # WinMac&#xA;    Key.LEFT_META: Key.LEFT_ALT,    # WinMac&#xA;    Key.LEFT_CTRL: Key.LEFT_META,   # WinMac&#xA;    Key.RIGHT_ALT: Key.RIGHT_CTRL,  # WinMac&#xA;    Key.RIGHT_META: Key.RIGHT_ALT,  # WinMac&#xA;    Key.RIGHT_CTRL: Key.RIGHT_META, # WinMac&#xA;})&#xA;&#xA;# [Conditional modmap] Change modifier keys in certain applications&#xA;define_conditional_modmap(re.compile(termStr, re.IGNORECASE), {&#xA;    # Default Mac/Win&#xA;    Key.LEFT_ALT: Key.RIGHT_CTRL,   # WinMac&#xA;    Key.LEFT_META: Key.LEFT_ALT,    # WinMac&#xA;    Key.LEFT_CTRL: Key.LEFT_CTRL,   # WinMac&#xA;    Key.RIGHT_ALT: Key.RIGHT_CTRL,  # WinMac&#xA;    Key.RIGHT_META: Key.RIGHT_ALT,  # WinMac&#xA;    Key.RIGHT_CTRL: Key.LEFT_CTRL,  # WinMac&#xA;})&#xA;&#xA;define_keymap(None,{&#xA;    # Cmd Tab - App Switching Default&#xA;    # App switching is mapped to use Ctrl+F13 in place of Tab&#xA;    # this avoids Alt+Tab from still activating App Switching&#xA;    # Ctrl+Tab is also used for In-App tab switching often times&#xA;    # RCtrl is also mapped in Cmd key position only&#xA;    K(&quot;RC-Tab&quot;): K(&quot;RC-F13&quot;),&#xA;    K(&quot;RC-Shift-Tab&quot;): K(&quot;RC-Shift-F13&quot;),&#xA;    K(&quot;RC-Grave&quot;): K(&quot;RC-Shift-F13&quot;),&#xA;    # In-App Tab switching&#xA;    # K(&quot;M-Tab&quot;): K(&quot;C-Tab&quot;),                   # Chromebook - In-App Tab switching&#xA;    # K(&quot;M-Shift-Tab&quot;): K(&quot;C-Shift-Tab&quot;),       # Chromebook - In-App Tab switching&#xA;    K(&quot;Super-Tab&quot;): K(&quot;LC-Tab&quot;),                # Default&#xA;    K(&quot;Super-Shift-Tab&quot;): K(&quot;LC-Shift-Tab&quot;),    # Default&#xA;    K(&quot;LC-Grave&quot;) : K(&quot;LC-Shift-Tab&quot;),&#xA;})&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18707" LastActivityDate="2020-05-04T20:33:13.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24416" PostTypeId="2" ParentId="24119" CreationDate="2020-05-04T20:36:04.327" Score="0" Body="&lt;p&gt;Why not create a bash script or use xbindkeys to execute a command that will always open a new terminal window for you on the hotkey you are wanting to use? Seems like it'd be simple to do.&lt;/p&gt;&#xA;" OwnerUserId="18707" LastActivityDate="2020-05-04T20:36:04.327" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24417" PostTypeId="2" ParentId="24196" CreationDate="2020-05-04T20:46:12.397" Score="0" Body="&lt;p&gt;I've noticed that too.&#xA;It would be nice, if notification will disappear again after open the app. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Or on other hand, if I click on the notification it should open the app. &lt;/p&gt;&#xA;" OwnerUserId="21156" LastActivityDate="2020-05-04T20:46:12.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24418" PostTypeId="2" ParentId="24158" CreationDate="2020-05-04T20:54:30.207" Score="1" Body="&lt;p&gt;similar issue here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Before lockscreen the sound output is set to headset. After lockscreen it is changed to speakers. &#xA;After each login I have to restore alsasound-settings:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alsactl --file xyz restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found some posts how to write a shell script to restore settings after login. But I couldn't test at the moment.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe this bash script could help:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gdbus monitor -y -d org.freedesktop.login1 | while read -r line; do&#xA;    if grep -q org.freedesktop.login1.Session.Unlock; then&#xA;        sleep 0.1&#xA;        sudo alsactl --file /Path/To/File/asound.state restore&#xA;    fi&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On my system it needs the sleep time. Otherwise the script runs to early and &quot;alsactl ... restore&quot; does not work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can run it as a deamon, so you don't have to start manuelly.&lt;/p&gt;&#xA;" OwnerUserId="21156" LastEditorUserId="21156" LastEditDate="2020-05-07T21:11:58.783" LastActivityDate="2020-05-07T21:11:58.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24419" PostTypeId="1" CreationDate="2020-05-04T21:29:55.457" Score="0" ViewCount="44" Body="&lt;p&gt;I am using eos hera 5.1&#xA;When I try to install &lt;strong&gt;Files&lt;/strong&gt; from &lt;strong&gt;appcenter&lt;/strong&gt; it fails with a response&#xA;I tried installing some other apps and they work fine&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The package id's '' are not valid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uKDXm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uKDXm.png&quot; alt=&quot;Screenshot of the error&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22754" LastActivityDate="2020-05-04T21:29:55.457" Title="Failure in installing elementary Files from appcenter" Tags="|release-hera|pantheon-files|applications|appcenter|files|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24420" PostTypeId="1" CreationDate="2020-05-04T22:08:08.810" Score="0" ViewCount="108" Body="&lt;p&gt;I cant get any geolocation on my elementary notebook. At first, I was trying to get the location when testing a mapping website using the Browser Geolocation API. Firefox and Chromium cant get any result from the Systems Geolocation Service. Then I tested with Gnome Maps, and it did not work either. As far as I know, Ubuntu based distros use geoclue and its providers for that, but it does not seem to work. How can I configure and debug it in elementary? I dont have a GPS on the notebook, but there should be at least a City-level result from the network/IP based location provider. I did not test with other OSes, but on different fixed WiFi networks. I am aware there is a settings page in elementary where I can allow/disallow apps to use the location provider, but Firefox and other browsers are not registered and I also can't add any new program manually.&lt;/p&gt;&#xA;" OwnerUserId="635" LastActivityDate="2024-01-16T01:04:15.487" Title="How to debug geolocation provider issues?" Tags="|settings|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24422" PostTypeId="1" AcceptedAnswerId="24572" CreationDate="2020-05-05T04:56:35.597" Score="0" ViewCount="173" Body="&lt;p&gt;I try to auto mount NFS shares over my local network. I add to /etc/fstab:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;192.168.0.24:/mnt/Toshiba/dietpi_userdata /mnt/nas nfs defaults 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I see service on start:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mnt-nfs.mount&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;but Elementary don't mount that shares after reboot.I have to do it manually:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -t nfs 192.168.0.24:/mnt/Toshiba/dietpi_userdata/ /mnt/nas &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I disabled my firewall. I have the same config in second laptop with Ubuntu 19.10 and it works fine.&#xA;Regards Przemek&lt;/p&gt;&#xA;" OwnerUserId="22767" LastEditorUserId="22767" LastEditDate="2020-05-14T06:07:14.687" LastActivityDate="2020-05-14T18:35:55.743" Title="Elementery Hera auto mount nfs don't work" Tags="|release-hera|mount|shared-libraries|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24423" PostTypeId="2" ParentId="24403" CreationDate="2020-05-05T09:35:41.767" Score="1" Body="&lt;p&gt;It is not currently possible for a 3rd party to provide a new view mode in Files - you would have to become an elementary developer and get a PR merged (new developers are welcomed).  I did push an experimental branch providing a compact view some years ago but at that time the design team were not too keen on adding a fourth mode especialy given the steady increase in screen size and resolution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The column view only shows small icons and filenames of course but only one column per folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can edit the setting &quot;io/elementary/files/icon-view/minimum-zoom-level&quot; using dconf-editor or the command line and change it to &quot;smallest&quot;.  This allows you to decrease the icon size to the smallest available and get 3x the items compared to List view.  However, the names then become rather cramped and hard to read.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-05-05T09:35:41.767" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24424" PostTypeId="1" CreationDate="2020-05-05T10:09:47.367" Score="0" ViewCount="78" Body="&lt;p&gt;Since the last kernel update (5.3.0-51) zoom takes almost 5 minutes to open. Until that time the whole operating system hangs and I can't do anything else. All I can do is wait for it to kick off.... This is quite crippling especially when I have appointments back to back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've erased the entire drive and done a clean install of the OS hoping to resolve the problem but it persists....any idea, any help please?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="22769" LastEditorUserId="22769" LastEditDate="2020-05-05T12:26:47.500" LastActivityDate="2024-01-15T23:08:21.060" Title="Zoom (seminar software) keeps hanging (Elementary Hera)" Tags="|release-hera|applications|kernel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24425" PostTypeId="2" ParentId="24424" CreationDate="2020-05-05T15:03:30.203" Score="0" Body="&lt;p&gt;The issue is indeed related to the kernel updates, and affects the Intel HD graphics card driver. There's a fix in the next kernel release (5.30-52): &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1872001&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1872001&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The alternative is to roll back to 5.30-45 (&lt;a href=&quot;https://www.reddit.com/r/linuxmint/comments/g9vxce/zoom_freezing_in_linux_kernel_greater_than_53045/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/linuxmint/comments/g9vxce/zoom_freezing_in_linux_kernel_greater_than_53045/&lt;/a&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To verify if you're affected by this, run &lt;code&gt;journalctl -b | grep i915&lt;/code&gt;, and look for lines that say &lt;code&gt;Resetting rcs0 for hang on rcs0&lt;/code&gt; around the same time that you're attempting to use Zoom.&lt;/p&gt;&#xA;" OwnerUserId="20186" LastActivityDate="2020-05-05T15:03:30.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24427" PostTypeId="2" ParentId="17400" CreationDate="2020-05-05T16:01:31.867" Score="1" Body="&lt;p&gt;First of all, I would check to see if the drivers are correct for your computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For this in the terminal enter the following command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ubuntu-drivers devices&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then with the information of which graphic card you have, enter the repository, update and finally install the driver for your graphic card.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:graphics-drivers/ppa   &#xA;sudo apt update&#xA;sudo apt install nvidia-XXX (You replace the XXX with your card number.)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Sorry for how I write, my native language is not English.&lt;/p&gt;&#xA;" OwnerUserId="22774" LastEditorUserId="16827" LastEditDate="2020-05-10T10:40:10.023" LastActivityDate="2020-05-10T10:40:10.023" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24428" PostTypeId="2" ParentId="24420" CreationDate="2020-05-05T16:47:19.877" Score="0" Body="&lt;p&gt;That worked for me.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add to /etc/geoclue/geoclue.conf:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[redshift]&#xA;allowed=true&#xA;system=false&#xA;users=&lt;/p&gt;&#xA;" OwnerUserId="22772" LastActivityDate="2020-05-05T16:47:19.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24430" PostTypeId="1" AcceptedAnswerId="24737" CreationDate="2020-05-05T18:38:59.543" Score="0" ViewCount="99" Body="&lt;p&gt;If I use shutdown options from Panel menu (indicators: session) it shows the shutdown options:&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;&lt;a href=&quot;https://i.stack.imgur.com/ziJZ6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ziJZ6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;no matter if I click shutdown or reboot, the system doesn't do anything. It doesn't care.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Shutdown in terminal works (with sudo): e.g. &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -h now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Is there a property to set? I did already search, but I didn't found... &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your inputs.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;syslog:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;wingpanel[1855]: session_widgets_userbox_update_state: assertion 'self&#xA;  != NULL' failed &#xA;  wingpanel[1855]: EndSessionDialog.vala:177: Unable to&#xA;  shutdown:&#xA;  GDBus.Error:org.freedesktop.DBus.Error.InteractiveAuthorizationRequired:&#xA;  Interactive authentication required.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update:&#xA;Would it help if I add shutdown in sudoers.d/File? So no authentification would be needed?&lt;/p&gt;&#xA;" OwnerUserId="21156" LastEditorUserId="21156" LastEditDate="2020-05-11T18:32:05.713" LastActivityDate="2020-05-29T15:49:46.233" Title="Power off from Panel menu doesn't work" Tags="|release-hera|shutdown|menu|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24431" PostTypeId="1" CreationDate="2020-05-05T20:01:55.127" Score="0" ViewCount="199" Body="&lt;p&gt;The activities button, time, icons, everything is gone on my wingpanel. I have tried restarting my computer and killing the wingpanel, but neither of those have helped. I would really appreciate some support, thanks.&lt;/p&gt;&#xA;" OwnerUserId="22778" LastActivityDate="2021-06-03T11:07:20.703" Title="Literally everything is gone from the wingpanel (top panel)" Tags="|wingpanel|desktop|icons|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24433" PostTypeId="2" ParentId="24430" CreationDate="2020-05-05T20:43:24.397" Score="0" Body="&lt;p&gt;if you could give some more information I could help you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By this I mean, if you modified something or installed an app before it happened.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Regards.&lt;/p&gt;&#xA;" OwnerUserId="22775" LastActivityDate="2020-05-05T20:43:24.397" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24435" PostTypeId="1" CreationDate="2020-05-05T23:35:34.627" Score="0" ViewCount="424" Body="&lt;p&gt;I removed &quot;System Settings&quot; app from elementary, and I tried to reinstall with the appcenter but it didn't download :( &#xA;Please help me. &lt;/p&gt;&#xA;" OwnerUserId="22781" LastEditorUserId="15904" LastEditDate="2020-05-10T10:29:01.663" LastActivityDate="2021-06-04T14:08:50.807" Title="How to reinstall &quot;System Settings&quot; app on Elementary OS - 5.1?" Tags="|release-hera|settings|software-installation|appcenter|pantheon|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24436" PostTypeId="2" ParentId="22371" CreationDate="2020-05-06T00:03:00.463" Score="0" Body="&lt;p&gt;tengo el mismo problema para descargar desde la tienda de elementaryOS. Este es el error:&#xA;The following packages have unmet dependencies:&#xA;  com.github.philip-scott.notes-up: Depende: libmarkdown2 (&gt;= 2.0.6) but it is not installable&#xA;ya intenté todo:&#xA;sudo apt-get autoremove&#xA;sudo apt-get autoclean&#xA;sudo apt-get update&#xA;sudo apt-get -f install&#xA;reinicié el pc y aun nada. Agradezco mucho si alguien puede ayudarme.&lt;/p&gt;&#xA;" OwnerUserId="22782" LastActivityDate="2020-05-06T00:03:00.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24437" PostTypeId="2" ParentId="24148" CreationDate="2020-05-06T03:02:49.290" Score="0" Body="&lt;p&gt;The culprit here is the &quot;Reveal pointer location&quot; checkbox in the Settings Pointer dialog. If you enable it, the Ctrl key will be swallowed in some un-curated applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, in the latest Amazon workspaces version, Ctrl works in fullscreen mode.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastEditorUserId="22486" LastEditDate="2020-05-06T03:37:46.047" LastActivityDate="2020-05-06T03:37:46.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24440" PostTypeId="1" CreationDate="2020-05-06T07:09:10.757" Score="2" ViewCount="151" Body="&lt;p&gt;As it is for now there's no easy way to change a folder's icon with a custom one. Exampel I want to change my Steam folder which indicate it's Steam in that directory.&#xA;I have tried with &lt;strong&gt;gio&lt;/strong&gt; command also with &lt;strong&gt;gvfs-set-attribute&lt;/strong&gt; command but it is deprecated.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;gio set -t string metadata::custom-icon file:///home/orion/.icons/ePapirus/48x48/places/folder-black-steam.svg &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;But it didn't work.&#xA;Is there a way to use custom icons in &quot;Files&quot;?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards,&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-06T07:09:10.757" Title="The use of a custom icon" Tags="|icons|files|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24443" PostTypeId="2" ParentId="18669" CreationDate="2020-05-06T11:07:25.087" Score="1" Body="&lt;p&gt;Is is also necessary to change a line in&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/etc/geoclue/geoclue.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;change this line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;url=https://location.services.mozilla.com/v1/geolocate?key=99054b086f8a4b9fa033e4a75801ab52&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;url=https://location.services.mozilla.com/v1/geolocate?key=geoclue&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22789" LastEditorUserId="17846" LastEditDate="2020-12-20T22:13:55.173" LastActivityDate="2020-12-20T22:13:55.173" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24444" PostTypeId="2" ParentId="21679" CreationDate="2020-05-06T12:11:23.323" Score="1" Body="&lt;p&gt;You need to change the physical clicking from multitouch to hardware default and you will have right click with options inside mouse and touchpad options&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Stefan&lt;/p&gt;&#xA;" OwnerUserId="22790" LastActivityDate="2020-05-06T12:11:23.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24446" PostTypeId="2" ParentId="16445" CreationDate="2020-05-06T13:43:47.920" Score="0" Body="&lt;pre&gt;&lt;code&gt;xrandr --output LVDS-1 -off&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;solved for me, but it's sad that it doesn't work for the Elementary OS system itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;edit:when I restarted the computer the problem came back&lt;/p&gt;&#xA;" OwnerUserId="18654" LastActivityDate="2020-05-06T13:43:47.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24447" PostTypeId="2" ParentId="16445" CreationDate="2020-05-06T15:30:04.310" Score="0" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;xrandr --output LVDS-1 -off&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;While this isn't ideal, it can be made semi-permanent by going to&lt;/p&gt;&#xA;&#xA;&lt;p&gt;System Settings&gt;Applications&gt;Startup and adding the appropriate string to activate on system start.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5Bywn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5Bywn.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I use this solution to prevent my second monitor from starting until I need it. I feel like the underlying problem has something to do with xorg, gtk, or something else upstream that the eOS team is somewhat at the mercy of.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="15297" LastActivityDate="2020-05-06T15:30:04.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24449" PostTypeId="2" ParentId="24431" CreationDate="2020-05-06T19:39:54.590" Score="1" Body="&lt;p&gt;I recomend you to try to reinstall it, using &lt;code&gt;sudo apt install --reinstall wingpanel&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-06T19:39:54.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24450" PostTypeId="1" CreationDate="2020-05-06T21:16:21.157" Score="0" ViewCount="274" Body="&lt;p&gt;I was running Elementary OS Loki or Juno (don't remember) on my Asus T100TA laptop. I figured I'd do a clean install of Hera, and since I had nothing of value on my computer I just removed all partitions before proceeding (last resort after hours). I booted into the ISO and started installing (used the first option in the installer, no manual tinkering), but at the end I got the message: &quot;Executing 'grub-install [...]' failed. This is a fatal error.&quot; I have tried both running the installer from within the OS, as well as installing it just after the dialog loads at the beginning. I've also connected my computer to the network and chosen to download updates, etc while installing. What do I do now?&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;No one who can help? I have no idea what to do.&lt;/p&gt;&#xA;" OwnerUserId="18985" LastEditorUserId="16827" LastEditDate="2020-05-10T10:28:14.353" LastActivityDate="2024-01-22T06:00:40.093" Title="Unable to install GRUB message (Hera)" Tags="|release-hera|grub|install|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24451" PostTypeId="2" ParentId="24435" CreationDate="2020-05-06T21:32:35.900" Score="1" Body="&lt;p&gt;You can try to recompile the app, it doesn't call &quot;System Setting&quot;, the app name is Switchboard, so just go to the Elementary OS github and check the repo of this app (&lt;a href=&quot;https://github.com/elementary/switchboard&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard&lt;/a&gt; ),&#xA;1) Download the repo&#xA;2) Install all the libraries and dependencies&#xA;3) Compile the project with vala and ninja&#xA;4) DONE ! :D&lt;/p&gt;&#xA;" OwnerUserId="22781" LastActivityDate="2020-05-06T21:32:35.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24452" PostTypeId="1" CreationDate="2020-05-07T08:49:22.460" Score="0" ViewCount="40" Body="&lt;p&gt;Im just installing this linux for the first time and i dont kno why my wifi cannot be activate&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;       *-network DISABLED&#xA;            description: Wireless interface&#xA;            product: BCM43227 802.11b/g/n&#xA;            vendor: Broadcom Inc. and subsidiaries&#xA;            physical id: 0&#xA;            bus info: pci@0000:02:00.0&#xA;            logical name: wlp2s0&#xA;            version: 00&#xA;            serial: c0:18:85:6b:87:1b&#xA;            width: 64 bits&#xA;            clock: 33MHz&#xA;            capabilities: bus_master cap_list ethernet physical wireless&#xA;            configuration: broadcast=yes driver=wl0 driverversion=6.30.223.271 (r587334) latency=0 multicast=yes wireless=IEEE 802.11&#xA;            resources: irq:17 memory:f0500000-f0503fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22795" LastActivityDate="2020-05-07T08:49:22.460" Title="My wifi has been disabled and i dont know why" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24453" PostTypeId="2" ParentId="22000" CreationDate="2020-05-07T13:06:44.140" Score="1" Body="&lt;p&gt;After fresh Hera install and reboot, I can't boot and get same error:&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;error: file '/boot/grub/i386-pc/normal.mod' not found.&lt;br&gt;&#xA;  Entering rescue mode...&lt;br&gt;&#xA;  grub rescue&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;What I did to solve it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Boot again with USB install stick (&quot;Try Elementary&quot; option).&lt;/li&gt;&#xA;&lt;li&gt;From a terminal console, create the missing folder ( /boot/grub/i386-pc ) on the target disk.&lt;/li&gt;&#xA;&lt;li&gt;Install grub.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Something like this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mount /dev/sda3  /mnt    ( in my case, /dev/sda3 is my root / partition ) &#xA;$ sudo mkdir  /mnt/boot/grub/i386-pc  &#xA;$ sudo grub-install  --root-directory=/mnt    /dev/sda &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;reboot. That's all. Working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some info:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When installing, the wizard asked me to create an EFI partition. So, I tried WITHOUT and then WITH EFI partition. Either case, I get same error (I just keep a small partition in the first sectors of the disk, about 200MB, which I toggle from FAT32 to EFI type).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Credits to &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=207827&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=207827&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="22799" LastEditorUserId="16827" LastEditDate="2020-05-10T10:37:00.713" LastActivityDate="2020-05-10T10:37:00.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24454" PostTypeId="2" ParentId="24323" CreationDate="2020-05-07T13:54:45.863" Score="0" Body="&lt;p&gt;it looks like there is a way to force antenna selection for that driver. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check out &lt;a href=&quot;https://askubuntu.com/questions/1058379/wifi-signal-is-weak-in-ubuntu-18-04-with-rtl8723be&quot;&gt;this&lt;/a&gt; post: &lt;/p&gt;&#xA;" OwnerUserId="22800" LastActivityDate="2020-05-07T13:54:45.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24455" PostTypeId="2" ParentId="24363" CreationDate="2020-05-07T13:59:04.950" Score="0" Body="&lt;p&gt;I had the same problem with precision 5530 with Ubuntu1604 preinstalled.&#xA;My workaround was to create backup of OS recovery partition and format it. After that Elementary OS installation started correctly.&lt;/p&gt;&#xA;" OwnerUserId="22801" LastActivityDate="2020-05-07T13:59:04.950" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24458" PostTypeId="1" AcceptedAnswerId="24493" CreationDate="2020-05-08T00:46:50.777" Score="0" ViewCount="59" Body="&lt;p&gt;I see no colored dots under the dates with events in the Calendar indicator. Is this a feature yet to come or am I missing a setting?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is a screenshot with the colored dots, which I don't have on my eOS Hera install:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q48Ip.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q48Ip.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22806" LastActivityDate="2020-05-10T12:39:04.533" Title="No colored dots under event dates in the Calendar indicator" Tags="|wingpanel|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24459" PostTypeId="1" CreationDate="2020-05-08T03:58:38.210" Score="0" ViewCount="170" Body="&lt;p&gt;I'm trying to use Elementary OS with NVIDIA drivers, and I have a two monitor layout. However, I disabled my secondary monitor to allow high refresh rates to work properly on my primary monitor. But whenever I restart Elementary, the settings don't save. I don't want to unplug the second monitor since I am dual booting Windows with it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone have any idea how to work around this?&lt;/p&gt;&#xA;" OwnerUserId="22807" LastActivityDate="2024-01-24T10:01:40.180" Title="My screen settings aren't saving on reboot" Tags="|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24460" PostTypeId="1" CreationDate="2020-05-08T07:20:54.190" Score="0" ViewCount="890" Body="&lt;p&gt;I am running eOS 5.1.3 Hera and have an Intel UHD Graphics 620 (rev 07) card in my machine.&#xA;I am looking to make sure that I am updated to the latest drivers before messing with any Wine applications. I was searching for the best way to go about installing these drivers but only found very old articles and pages, which I imagine are outdated by now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This was the latest link that I attempted to follow: &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2019/01/install-mesa-18-2-8-ppa-ubuntu-18-04-18-10/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2019/01/install-mesa-18-2-8-ppa-ubuntu-18-04-18-10/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, the first command listed for the terminal does not execute: &lt;code&gt;add-apt-repository&lt;/code&gt; as it is not recognized, and looking at intel's website I don't think Mesa is the newest driver anyhow.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone more knowledgeable than I know how to properly see if I am updated / how to update these drivers in 2020?&lt;/p&gt;&#xA;" OwnerUserId="22808" LastEditorUserId="15904" LastEditDate="2020-05-10T10:28:53.723" LastActivityDate="2024-01-20T17:09:16.063" Title="Updating to Latest Intel Graphics Drivers ElementaryOS 5.1.3" Tags="|release-hera|graphic-drivers|drivers|graphics|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24461" PostTypeId="2" ParentId="24460" CreationDate="2020-05-08T07:31:15.910" Score="0" Body="&lt;p&gt;First thing first. Backup your important files before venturing further.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To add a PPA to eOS you need to install:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next thing is to add a PPA which contains driver for intel:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:oibaf/graphics-drivers&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now getting the latest intel driver:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-video-intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-08T07:31:15.910" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24462" PostTypeId="1" CreationDate="2020-05-08T10:39:10.883" Score="0" ViewCount="822" Body="&lt;p&gt;Can I add hover effects to the plank? If so, how?&lt;/p&gt;&#xA;" OwnerUserId="22783" LastActivityDate="2020-06-10T18:41:00.057" Title="Is there a way to add hover effects to the plank?" Tags="|plank|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24464" PostTypeId="1" CreationDate="2020-05-08T12:05:21.667" Score="0" ViewCount="28" Body="&lt;p&gt;I was on 5.1 for a while; and recently did a fresh install to 5.1.3. Since then, when I go to Files application's location bar and do ~/somedir, it says &quot;Unable to mount folder - could not connect to the server for this folder.&quot; Problem seems to be that it is actually prefixing a &quot;/&quot; effectively making the location &quot;/~/somedir&quot;.  Hadn't experienced this before at all. I also did all updates and upgrades using apt. Issue persists.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyone has seen this, or has a solution? I am pretty sure this wasn't the case before since ~/ is a integral part of my workflow.&lt;/p&gt;&#xA;" OwnerUserId="18495" LastActivityDate="2020-05-08T12:05:21.667" Title="Files -&gt; tilde (~) doesn't resolve to Home?" Tags="|pantheon-files|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24465" PostTypeId="2" ParentId="24363" CreationDate="2020-05-08T14:18:14.457" Score="1" Body="&lt;p&gt;I ended up returning the device to Dell and ordering an Oryx Pro from System76 which is rated online as a Elementary OS friendly device.&lt;/p&gt;&#xA;" OwnerUserId="20206" LastActivityDate="2020-05-08T14:18:14.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24466" PostTypeId="2" ParentId="24431" CreationDate="2020-05-08T14:39:32.777" Score="0" Body="&lt;p&gt;I have been having the same issues for the past 1 month, never faced it before in my roughly 2 years of using eOS as my primary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running &quot;wingpanel&quot; in terminal seems to bring it back, but it's an active process in the terminal, so if I close terminal, I lose the wingpanel again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also the wingpanel only disappears when I click on the sound icon, the wifi, bluetooth,date, applications button all work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Tried uninstalling and reinstalling it, didn't work. Let me know if something works for you.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit 1: Now I am unable to login to eOS. Get the following error code &quot;elementary os session returned error code 1&quot;. Welp... :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit 2: I solved the wingpanel issue by reinstalling the default music player. :)&lt;/p&gt;&#xA;" OwnerUserId="20393" LastEditorUserId="20393" LastEditDate="2020-05-09T08:29:19.090" LastActivityDate="2020-05-09T08:29:19.090" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24469" PostTypeId="1" CreationDate="2020-05-08T20:04:34.050" Score="0" ViewCount="88" Body="&lt;p&gt;Fellas&#xA;I've been using Linux Mint for quite some time &amp;amp; recently have replaced my Windows partition with Elementary OS. But the Boot sequence hasn't changed. I want to make Elementary my default OS instead of Linux Mint.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked all the options listed but without success. I googled it, the problem is everyone is either suggesting to bypass or install some utility. As far as I understand, it shouldn't be. The question is how to? What's the procedure?&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Have wi-fi adapter which isn't being recognized by Elementary (RTL8188FTV).&#xA;Is there any run around or some utility needs to be installed? &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanking you in advance&lt;/p&gt;&#xA;" OwnerUserId="22818" LastActivityDate="2024-01-20T08:01:10.147" Title="How to switch boot sequence in dual boot PC?" Tags="|wifi|dual-boot|grub|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24470" PostTypeId="1" AcceptedAnswerId="24478" CreationDate="2020-05-08T23:53:38.197" Score="0" ViewCount="105" Body="&lt;p&gt;I used eOS quite a long time now and I'm very satisfied with it. I installed eOS alongside with W10 but want to get rid of W10 now. Both OS are installed on separate hdds.&#xA;Am I doing it right to use gparted and just delete the drive which holds the W10 installation? How can I update the GRUB loader in order to directly boot into eOS?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope you guys can help on this as I only found links on the internet how to remove eOS from dual boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you,&#xA;Martin&lt;/p&gt;&#xA;" OwnerDisplayName="user22819" LastActivityDate="2020-05-09T09:54:33.923" Title="How can I remove Windows 10 from dual boot with elementary os" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24471" PostTypeId="1" AcceptedAnswerId="24473" CreationDate="2020-05-09T00:57:06.513" Score="1" ViewCount="68" Body="&lt;p&gt;So when I create a new partition, I have 2 questions:&#xA;1. What file system do I use?&#xA;2. What mount point should I select?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have already created a partition on my mac, but it doesn't show up on the list where you choose a partition.&lt;/p&gt;&#xA;" OwnerUserId="22820" LastEditorUserId="22820" LastEditDate="2020-05-09T01:04:10.833" LastActivityDate="2020-05-09T06:08:19.897" Title="Help to create partition" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24473" PostTypeId="2" ParentId="24471" CreationDate="2020-05-09T06:08:19.897" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You should go with ext4&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Depends. The best way is to split root (/) directory and /home directory. But if you have a small HDD I'll go plain /&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;I'm not familiar with MAC, there may be some extra step.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;regards&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-09T06:08:19.897" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24474" PostTypeId="2" ParentId="21764" CreationDate="2020-05-09T07:35:45.817" Score="1" Body="&lt;p&gt;I too am facing the same issue. I do all of my coding work on eOS and it's all stuck there now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This happened after the recent update to eOS 5.1.2&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can still boot into my Windows 10 (dual boot setup).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do I have to reinstall it or is there some workaround?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Solved it by following the directions someone had posted somewhere else. Here's the solution: After being returned the error&#xA;Ctrl+Alt+F1&#xA;login with your username and password&#xA;&quot;rm .Xauthority&quot;&#xA;&quot;sudo apt-get install pantheon-xsession-settings&quot;&#xA;Ctrl+Alt+F7&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Restart. Hope it helps&lt;/p&gt;&#xA;" OwnerUserId="20393" LastEditorUserId="20393" LastEditDate="2020-05-09T08:32:09.750" LastActivityDate="2020-05-09T08:32:09.750" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24477" PostTypeId="1" CreationDate="2020-05-09T09:08:13.200" Score="0" ViewCount="71" Body="&lt;p&gt;Generally most things work well for me on 5.1, but I have one annoying issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have an external monitor connected to my laptop via HDMI, and have it set as my primary screen (to the right of my laptop). When I open almost anything (File Manager, Code, etc) it opens first on the laptop screen, but so high that the top of the window is off-screen and no matter what I do I can't move it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open another instance of said application and it opens on the external screen as I'd expect. Closing the laptop is an option, but a waste of a screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Both screens are 1920 x 1080 resolution, and graphics are Intel or a GTX785M card.&lt;/p&gt;&#xA;" OwnerUserId="22822" LastActivityDate="2020-05-09T09:08:13.200" Title="Annoying dual-screen window placement issues" Tags="|display|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24478" PostTypeId="2" ParentId="24470" CreationDate="2020-05-09T09:54:33.923" Score="0" Body="&lt;p&gt;Type in terminal: sudo update-grub &#xA;It should find only the Elementary. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-09T09:54:33.923" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24479" PostTypeId="1" CreationDate="2020-05-09T14:28:08.030" Score="1" ViewCount="134" Body="&lt;p&gt;&lt;strong&gt;The problem:&lt;/strong&gt; Audio output works great, the microphone is recognized by the system but the recorded sound is full of static noise. I have the same problem on Ubuntu (both 19.10 and 20.4), Elementary OS Hera and Linux Mint 19.3, but not on Windows 10.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I'm using:&lt;/strong&gt; I'm using a packard bell easynote Tj75 notebook, with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Audio device:&lt;/strong&gt; Intel Corporation 5 Series/3400 Series Chipset High Definition Audio Alsamixer Card: HDA Intel MID&#xA;Alsamixer Chip: Realtek ALC272X&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I've tried so far:&lt;/strong&gt; I tried almost everything I could, including:&#xA;-all of the suggestions reported here &lt;a href=&quot;https://wiki.archlinux.org/index.php/PulseAudio/Troubleshooting&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/PulseAudio/Troubleshooting&lt;/a&gt;&#xA;_uninstall and reinstall pulse audio&lt;/p&gt;&#xA;&#xA;&lt;p&gt;An interesting thing is what happens if I enable Echo/Noise-Cancellation: &#xA;_it works only on Linux Mint, even if the problem is just resized, not erased&#xA;_on Ubuntu and Elementary I cannot access audio settings (from the settings menu): when I click to open the window, it crashes :S&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Any idea?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22824" LastActivityDate="2020-05-09T14:28:08.030" Title="Microphone sound quality is horrible" Tags="|audio|input|alsa|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24480" PostTypeId="2" ParentId="24469" CreationDate="2020-05-09T15:22:14.773" Score="0" Body="&lt;p&gt;Find out how to install grub customizer via ppa and there are also tutorials on YouTube which explain how to use it. Much easier than editing the grub.cfg. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-09T18:29:55.413" LastActivityDate="2020-05-09T18:29:55.413" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24483" PostTypeId="2" ParentId="24450" CreationDate="2020-05-09T18:56:50.377" Score="0" Body="&lt;p&gt;You need to install from the UEFI partition on your eOS USB stick. Just choose UEFI USB in the boot options menu when you start your computer.&lt;/p&gt;&#xA;" OwnerUserId="22806" LastEditorUserId="22806" LastEditDate="2020-05-11T21:01:37.573" LastActivityDate="2020-05-11T21:01:37.573" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24484" PostTypeId="1" CreationDate="2020-05-09T20:40:41.517" Score="1" ViewCount="51" Body="&lt;p&gt;I'm using Elementary OS Hera, I got a new computer that I'm trying to transfer the data to. I enabled SAMBA, but whenever I connect to my computer from my new one it only shows /home/chris it doesn't show files like .mozilla or .steam which are in my home directory. This is what I have in smb.conf&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[sharingtime]&#xA;  comment = My Folders&#xA;  read only = no&#xA;  path = /home&#xA;  browsable = yes&#xA;  guest ok = yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14814" LastEditorUserId="14814" LastEditDate="2020-05-09T20:53:03.103" LastActivityDate="2020-05-10T04:11:50.957" Title="How to get dot files to show in networking sharing?" Tags="|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24486" PostTypeId="2" ParentId="24484" CreationDate="2020-05-10T02:39:10.467" Score="1" Body="&lt;p&gt;You don't have samba user assigned to your shared directory, Make sure you create samba user first like below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;smbpasswd -a chris&#xA;smbpasswd -e chris&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You've to add your samba user to a shared folder like below&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;[sharingtime]&#xA;comment = My Folders&#xA;path = /home&#xA;valid users = chris&#xA;browseable = yes&#xA;guest ok = no&#xA;writeable = yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-05-10T02:39:10.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24487" PostTypeId="2" ParentId="24450" CreationDate="2020-05-10T04:01:35.297" Score="0" Body="&lt;p&gt;The solution is to boot to USB and NOT UEFI from boot option menu. Leave the internal hard disks as first bootable options in BIOS, use F-Key (usually F12) at bootup to enter boot option menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then do manual partitioning.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Remove all partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create primary partition 512 - 1024 MB , format as fat32 and mount as /boot/EFI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then create swap 8-16GB and format as swap and mount it as a swap.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create a main partition as primary and here you can choose to format is as LVM, or ext4 and mount as / and give it 50% of your hard drive’s size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;LVM gives you later option to dynamically change the size of each LVM partitions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Create extended or primary partition , format as LVM or ext4 and mount as /home and give it the second  50% of the hard drive’s size.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The grub boot loader fails during installation because the installation USB is still plugged in and the system is attempting to load the grub to the USB drive. Unplug the USB drive at the point in the installation when asked to install the grub boot loader.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-10T04:07:21.213" LastActivityDate="2020-05-10T04:07:21.213" CommentCount="16" ContentLicense="CC BY-SA 4.0" />
  <row Id="24488" PostTypeId="2" ParentId="24484" CreationDate="2020-05-10T04:11:50.957" Score="0" Body="&lt;p&gt;Eventually press ctrl+h each time to show hidden files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eventually add to each samba share entry in samba.cfg something like that:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;inherit acls = Yes&#xA;create mask = 660&#xA;directory mask = 770&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-10T04:11:50.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24490" PostTypeId="1" CreationDate="2020-05-10T07:11:24.923" Score="0" ViewCount="95" Body="&lt;p&gt;There are 2 VLC apps appeared when I searched &quot;vlc&quot; in appcenter. The first one i think i installed months ago. The second one is more updated and is not installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WHOsp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WHOsp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;And why is the uninstalled one over 700 MB?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WHOsp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WHOsp.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22833" LastEditorUserId="3018" LastEditDate="2020-05-15T20:32:28.033" LastActivityDate="2020-05-15T20:32:28.033" Title="Two VLC Apps in AppCenter" Tags="|applications|appcenter|vlc|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24492" PostTypeId="2" ParentId="24490" CreationDate="2020-05-10T10:05:59.083" Score="2" Body="&lt;p&gt;One is from &lt;strong&gt;eos&lt;/strong&gt; and the other is from &lt;strong&gt;Flatpak&lt;/strong&gt; repository&lt;/p&gt;&#xA;" OwnerUserId="18318" LastActivityDate="2020-05-10T10:05:59.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24493" PostTypeId="2" ParentId="24458" CreationDate="2020-05-10T12:39:04.533" Score="0" Body="&lt;p&gt;The answer is &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-datetime/issues/206&quot; rel=&quot;nofollow noreferrer&quot;&gt;here on Github&lt;/a&gt;. A solution is not there yet.&lt;/p&gt;&#xA;" OwnerUserId="22806" LastActivityDate="2020-05-10T12:39:04.533" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24494" PostTypeId="2" ParentId="21497" CreationDate="2020-05-10T14:29:26.440" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/561565/i-dont-know-what-is-producing-the-gigabytes-of-error-in-syslog/585714#585714&quot;&gt;i dont know what is producing the gigabytes of error in syslog&lt;/a&gt;&#xA;is a similar question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have posted details on a bug &lt;a href=&quot;https://unix.stackexchange.com/a/585714/137608&quot;&gt;here&lt;/a&gt;. It is related to VLC (and perhaps other video players).&#xA;The bug was not solved. But as a way to stop the output, closing VLC apparently works. As per messages in the bug thread, and my own experience, avoiding having a playing video while switching users, and perhaps workspaces, should prevent the issue from appearing. Starting VLC at the command line is an alternative workaround, since all output would go to stdout.&lt;/p&gt;&#xA;" OwnerUserId="22838" LastActivityDate="2020-05-10T14:29:26.440" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24499" PostTypeId="1" CreationDate="2020-05-10T17:58:33.713" Score="1" ViewCount="443" Body="&lt;p&gt;Apps installed via flatpak seems to have blurry icons on dock. Right after starting the app, the app icon on dock seems fine but as soon as its loaded it is blurred. I have tested it in vlc and transmission. I have included the images &lt;a href=&quot;https://i.stack.imgur.com/E7Fzz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E7Fzz.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;(before and after loading) for vlc : &lt;/p&gt;&#xA;" OwnerUserId="22811" LastActivityDate="2024-01-12T23:08:20.980" Title="Blurry Flatpak apps icon on dock (installed from flathub)" Tags="|plank|icons|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24508" PostTypeId="1" AcceptedAnswerId="24554" CreationDate="2020-05-11T06:07:19.633" Score="0" ViewCount="139" Body="&lt;p&gt;Folks; unsure how to dive into this, but I learnt that on one of my devices (HP EliteBook Folio), after upgrading to 5.1.4 Bluetooth seems &quot;broken&quot;. State:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;No error messages in system log or dmesg.&lt;/li&gt;&#xA;&lt;li&gt;Bluetooth icon in panel is constantly greyed out and &quot;disabled&quot;, enabling doesn't change that.&lt;/li&gt;&#xA;&lt;li&gt;Devices that have been paired don't connect anymore, new devices can't be added because the laptop can't find anything nearby.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Weird. Anyone else noticing that? Any idea how to debug or even fix this?&#xA;Thanks,&#xA;Kristian&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2020-05-13T09:41:28.487" Title="5.1.4: bluetooth broken?" Tags="|release-hera|bluetooth|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24509" PostTypeId="1" CreationDate="2020-05-11T07:04:58.693" Score="1" ViewCount="363" Body="&lt;p&gt;So out of the blue my elementaryOS 5.1 has stopped responding on the login screen. Whereas yesterday everything worked perfectly fine, today I get stuck because both mouse and keyboard stop working entirely. Pressing ctrl-alt-f2 to switch to a different tty also yields no response.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The problem does not lie with the peripherals. They work perfectly fine in the BIOS, and I can navigate the grub boot menu just fine. It looks more like the entire system just crashes as soon as the login screen shows up? The cursor for entering the password to login is initially blinking, but stops and freezes after a few seconds. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have not updated anything, nor installed any new software. I have ample space, my harddrive is half empty. I've found no solutions to this problem, and no person experiencing the exact same issue.&lt;/p&gt;&#xA;" OwnerUserId="22850" LastActivityDate="2020-07-24T10:54:23.277" Title="Mouse and keyboard unresponsive on login screen; cannot switch to tty" Tags="|release-hera|greeter|keyboard|mouse|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24510" PostTypeId="2" ParentId="24462" CreationDate="2020-05-11T08:55:29.190" Score="0" Body="&lt;p&gt;Not sure what you mean by hover effects, but I recently found out Plank has a “secret“ menu, just &lt;strong&gt;Crtl right click&lt;/strong&gt; on it and pick Preferences, you can change its theme, position, add docklets etc.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-05-11T08:55:29.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24511" PostTypeId="1" AcceptedAnswerId="24513" CreationDate="2020-05-11T10:00:51.663" Score="0" ViewCount="7695" Body="&lt;p&gt;I am totally new to elementary OS and I want to install new themes and icon packs. Please help me out by providing me with step by step guide on how to install themes and icon packs in elementary OS 5.1.&#xA;Thanks in advance ️&lt;/p&gt;&#xA;" OwnerUserId="22852" LastEditorUserId="15904" LastEditDate="2020-05-13T05:48:55.070" LastActivityDate="2021-02-09T10:56:36.990" Title="How do I install themes and icon packs in elementary OS 5.1?" Tags="|release-hera|themes|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24512" PostTypeId="1" CreationDate="2020-05-11T10:15:18.437" Score="0" ViewCount="142" Body="&lt;p&gt;When viewing PDFs in Epiphany's internal viewer the PDF is basically unreadable due to heavy flickering. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Is there a workaround to open PDFs externally until fixed?&lt;/p&gt;&#xA;" OwnerUserId="22853" LastActivityDate="2024-01-22T19:08:51.130" Title="Epiphany internal PDF viewer just flickers" Tags="|release-hera|applications|epiphany|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24513" PostTypeId="2" ParentId="24511" CreationDate="2020-05-11T10:26:34.700" Score="3" Body="&lt;p&gt;To change theme, icons and fonts in elementary OS you need a third party app called elementary tweaks. Open the terminal and copy/paste these commands;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You can now find elementary tweaks in System Settings. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HoDIe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HoDIe.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get more themes to use in elementary OS you need to do following that will make two folders in your home directory. One for your themes and one for your icons:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;mkdir -p .themes&#xA;mkdir -p .icons&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The two folders are hidden, so you need to right click in your file-browser and select &lt;strong&gt;Show Hidden Files&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next thing is to head over to www.gnome-look.org and download a theme and some icons. The icons section is &lt;a href=&quot;https://www.gnome-look.org/browse/cat/132/order/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and the theme section is &lt;a href=&quot;https://www.gnome-look.org/browse/cat/135/order/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Unpack the icons to the .icons folder and unpack the theme to the .themes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When it’s done go to System Settings and click Tweak.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Enjoy ^_^&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-11T10:26:34.700" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24515" PostTypeId="1" CreationDate="2020-05-11T11:09:17.967" Score="4" ViewCount="193" Body="&lt;p&gt;Calendar with dark mode it's almost impossible to use. Colors for event's make unreadable information without access the event itself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lKkDw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lKkDw.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0joq2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0joq2.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22856" LastActivityDate="2020-06-24T11:40:23.303" Title="Unreadable calendar event's in Dark Mode" Tags="|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24516" PostTypeId="1" AcceptedAnswerId="24517" CreationDate="2020-05-11T11:23:39.653" Score="1" ViewCount="92" Body="&lt;p&gt;I enabled dark theme in elementary OS 5.1 using this command: &quot;&lt;strong&gt;&lt;em&gt;wget &lt;a href=&quot;https://raw.githubusercontent.com/veyselerden/elementaryos-dark-theme-enabler-script/master/enable-dark-theme.sh&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://raw.githubusercontent.com/veyselerden/elementaryos-dark-theme-enabler-script/master/enable-dark-theme.sh&lt;/a&gt; &amp;amp;&amp;amp; chmod +x enable-dark-theme.sh &amp;amp;&amp;amp; ./enable-dark-theme.sh&lt;/em&gt;&lt;/strong&gt;&quot;&#xA;How do I revert back to the normal theme?&lt;/p&gt;&#xA;" OwnerUserId="22852" LastActivityDate="2020-05-11T22:40:23.380" Title="How to revert back to normal theme?" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24517" PostTypeId="2" ParentId="24516" CreationDate="2020-05-11T11:29:20.943" Score="4" Body="&lt;p&gt;The script copied some setting changes into gtk config. So you just need to delete that file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf ~/.config/gtk-3.0/settings.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The dock theme however is overridden by the script, so you need to find a suitable theme at gnome-look.org&lt;/p&gt;&#xA;&#xA;&lt;p&gt;[Plank themes here&lt;a href=&quot;https://www.gnome-look.org/browse/cat/273/order/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Extract the package to &lt;code&gt;.local/share/plank/themes&lt;/code&gt; (hidden in your home directory)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open the terminal type;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You’ll now be greeted by this menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XDF2L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XDF2L.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can now pick the theme you downloaded.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="784" LastEditDate="2020-05-11T22:40:23.380" LastActivityDate="2020-05-11T22:40:23.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24518" PostTypeId="2" ParentId="22600" CreationDate="2020-05-11T12:38:28.037" Score="0" Body="&lt;p&gt;Well, I went ahead and bought an Intel AX200NGW, the latest and greatest AFAIK, supporting Wi-Fi 6 ax and Bluetooth 5.1.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just placed it in my XPS, worked out of the box right away, no drivers needed, so upgrade with no worries.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-05-11T12:38:28.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24519" PostTypeId="1" CreationDate="2020-05-11T12:49:34.047" Score="1" ViewCount="67" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Tpq62.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Tpq62.png&quot; alt=&quot;upper tray icons&quot;&gt;&lt;/a&gt;&#xA;I was wondering if there was any way to bring the upper tray icons more closer so that they look appealing. Please help me out.&lt;/p&gt;&#xA;" OwnerUserId="22852" LastActivityDate="2024-01-22T07:05:00.557" Title="Is there a way to bring the icons in upper tray closer?" Tags="|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24520" PostTypeId="2" ParentId="21586" CreationDate="2020-05-11T16:57:48.530" Score="0" Body="&lt;p&gt;I don't know about any particular software but you can use this extension in firefox to download videos from any website including youtube.&#xA;&lt;strong&gt;&lt;em&gt;&lt;a href=&quot;https://www.downloadhelper.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.downloadhelper.net/&lt;/a&gt;&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22852" LastActivityDate="2020-05-11T16:57:48.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24521" PostTypeId="1" CreationDate="2020-05-11T17:21:10.440" Score="1" ViewCount="33" Body="&lt;p&gt;I'm on elementary OS &lt;code&gt;5.1.4&lt;/code&gt; Hera and use the &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Tab&lt;/kbd&gt; shortcut to cycle through open applications. This cycles through applications by bringing each window into focus (foreground).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I want to be able to cycle through applications without focusing on them, a la Mac style cycling. Is there a shortcut, setting or app that can help me achieve this?&lt;/p&gt;&#xA;" OwnerUserId="19798" LastEditorUserId="19798" LastEditDate="2020-05-19T19:00:41.973" LastActivityDate="2020-05-19T19:00:41.973" Title="Cycle through windows without focusing on them" Tags="|keyboard-shortcuts|window-management|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24522" PostTypeId="1" CreationDate="2020-05-11T18:19:30.013" Score="0" ViewCount="741" Body="&lt;p&gt;I am a new user in elementary os. I tried installing a deb file in the terminal, however it doesn't work. I had tried &lt;code&gt;sudo apt install&lt;/code&gt; but it doesn't work.&lt;/p&gt;&#xA;" OwnerUserId="22860" LastEditorUserId="12483" LastEditDate="2020-05-20T23:14:57.557" LastActivityDate="2020-11-19T20:14:41.650" Title="terminal dosnt install discord?" Tags="|elementary-project|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24523" PostTypeId="2" ParentId="24401" CreationDate="2020-05-11T20:17:36.603" Score="1" Body="&lt;p&gt;Now I know what was going on&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The ISP company that provide my internet has as poor DNS, so I changed the DNS to 1.1.1.1 and 1.0.0.1 to modem's configuration and now everything is updating.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All my sources.list.d/ files was poiting to bionic which it's the right thing to do. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if anyone has this problem, please try to check your DNS first&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks Elementary Team for this Awesome operation system that I use for my everyday work :)&lt;/p&gt;&#xA;" OwnerUserId="22777" LastActivityDate="2020-05-11T20:17:36.603" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24524" PostTypeId="2" ParentId="24519" CreationDate="2020-05-11T21:24:59.163" Score="0" Body="&lt;p&gt;Ayatana indicators for apps , tlp, tlp UI , slimbook battery - works on DELL not only Slimbooks. It should work on all laptops. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Copy all bolded text below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.config/autostart &amp;amp;&amp;amp; cp /etc/xdg/autostart/indicator-application.desktop ~/.config/autostart/ &amp;amp;&amp;amp; sed -i 's/^OnlyShowIn.*/OnlyShowIn=Unity;GNOME;Pantheon;/' ~/.config/autostart/indicator-application.desktop &amp;amp;&amp;amp; wget http://ppa.launchpad.net/elementary-os/stable/ubuntu/pool/main/w/wingpanel-indicator-ayatana/wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb &amp;amp;&amp;amp; sudo dpkg -i wingpanel-indicator-ayatana_2.0.3+r27+pkg17~ubuntu0.4.1.1_amd64.deb &amp;amp;&amp;amp; systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then type in terminal &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/yourusername&#xA;&#xA;&#xA;sudo vi indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;press ins button to go into insert mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;press ctrl+shift+v to paste&lt;/p&gt;&#xA;&#xA;&lt;p&gt;press esc button to escape insert mode&lt;/p&gt;&#xA;&#xA;&lt;p&gt;type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:wq&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;this will write and quit the file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;then type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;./indicators.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;script will run, install ayatana and restart the machine&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Works in hera 5.1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For double wi-fi icon&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mv /etc/xdg/autostart/nm-applet.desktop /etc/xdg/autostart/nm-applet.desktop.old&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additional gift for battery saver. Requires tlp to work&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&#xA;&#xA;&#xA;sudo apt install tlp&#xA;&#xA;&#xA;&#xA;sudo add-apt-repository ppa:slimbook/slimbook&#xA;&#xA;&#xA;&#xA;sudo apt update&#xA;&#xA;&#xA;&#xA;sudo apt install slimbookbattery&#xA;&#xA;&#xA;&#xA;sudo apt install gnome-shell-extension-appindicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you need also tlp UI&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:linuxuprising/apps&#xA;&#xA;&#xA;&#xA;sudo apt install tlpui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;to remove slimbook battery and app indicator&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove slimbookbattery gnome-shell-extension-appindicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove tlp&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;to remove tlp UI:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --autoremove tlpui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;How to remove gaps between icons in wing panel a tutorial&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1 - Install the wingpanel indicator mentioned in previous post&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2 - Download libayatana_compatibility.so.zip from here: &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/files/3776351/libayatana_compatibility.so.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;libayatana_compatibility.so.zip&lt;/a&gt; and unzip it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Open terminal and go to Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /home/username/Downloads&lt;/p&gt;&#xA;&#xA;&lt;p&gt;unzip libayatana_compatibility.so.zip&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3 - Go To (with sudo) /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo -i&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type your sudo user password&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cd /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4 - Backup your libayatana_compatibility.so&lt;/p&gt;&#xA;&#xA;&lt;p&gt;mv libayatana_compatibility.so libayatana_compatibility.backup&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5 - Replace the libayatana_compatibility.so with the zipped one&lt;/p&gt;&#xA;&#xA;&lt;p&gt;cp /home/username/Downloads/libayatana-compatibility.so /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6 - reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;systemctl reboot&lt;/p&gt;&#xA;&#xA;&lt;p&gt;source&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators/issues/1&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this works to me with no problem.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-11T21:30:14.147" LastActivityDate="2020-05-11T21:30:14.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24526" PostTypeId="2" ParentId="24522" CreationDate="2020-05-11T22:55:07.770" Score="4" Body="&lt;p&gt;To install a downloaded .deb file, you have to use the command &lt;strong&gt;dpkg&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i &amp;lt;distination&amp;gt;/&amp;lt;package&amp;gt;.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or install &lt;strong&gt;Eddy&lt;/strong&gt;, it's point and click for .deb files.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By the way Discord is available at Flathub: &lt;a href=&quot;https://flathub.org/apps/search/discord&quot; rel=&quot;nofollow noreferrer&quot;&gt;enter link description here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="8902" LastEditDate="2020-05-12T03:11:07.010" LastActivityDate="2020-05-12T03:11:07.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24527" PostTypeId="1" CreationDate="2020-05-11T23:37:46.623" Score="1" ViewCount="26" Body="&lt;p&gt;Previously, using Windows, I developed a large file structure.  Now that I've changed to Linux (Elementary OS), I'm experiencing a discrepancy in sorting capability.  To wit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I look at my file structure in LibreOffice (or Windows), exclamation points sort ahead of alphanumeric characters.  But when I look at the file structure using the Files application, the exclamation points are ignored by the system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want to go through all my files and delete the exclamation points, because there are thousands of them and it would be a huge nuisance.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I make my files sort the same way, with exclamation points coming before letters and numbers?&lt;/p&gt;&#xA;" OwnerUserId="22862" LastActivityDate="2024-01-24T08:03:45.387" Title="Mismatched file sort capability" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24529" PostTypeId="1" AcceptedAnswerId="24564" CreationDate="2020-05-12T08:11:34.073" Score="1" ViewCount="42" Body="&lt;p&gt;One of the new thing in slingshot is how every app is listed on top of eachother. My question is; can I set slingshot to list the apps the old way (next to eachother and bigger)?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Qr8hK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Qr8hK.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-13T23:32:28.887" Title="Revert slingshot to old set up" Tags="|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24530" PostTypeId="1" AcceptedAnswerId="24592" CreationDate="2020-05-12T08:15:58.220" Score="2" ViewCount="1481" Body="&lt;p&gt;I was wondering how I go about replacing the text at the top left of the &#xA;&lt;code&gt;wingpanel&lt;/code&gt;  from &lt;strong&gt;Applications&lt;/strong&gt; to the official Elementary OS logo. Can anyone please help me there is a similar question posted on this site but doesn't work for the current version of OS.&#xA;The link to the similar questoin is '''&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/6840/how-to-replace-wingpanels-applications-text-with-a-icon-in-freya&quot;&gt;How to replace wingpanel&amp;#39;s &amp;quot;Applications&amp;quot; text with a icon in Freya&lt;/a&gt;'''&lt;/p&gt;&#xA;" OwnerUserId="22867" LastActivityDate="2021-02-10T23:13:07.200" Title="How to replace wingpanel's “Applications” text with a icon in Elementary OS 5.1 Hera" Tags="|release-hera|wingpanel|themes|" AnswerCount="4" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24531" PostTypeId="1" CreationDate="2020-05-12T10:57:23.150" Score="0" ViewCount="117" Body="&lt;p&gt;NOOB alert &#xA;I have been using elementary os for a couple of months without issue. I noticed a couple of days ago a low file space alert. So I increased my root partition from 12 GB to 26 GB which seemed to work fine.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had a freeze this afternoon so I rebooted and since then all I get is thrown back to the password prompt after a couple of black to grey screen flashes.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I booted off a USB and I can see that the root partition is full but I have no idea why or how to investigate it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So please help with detailled instructions of how get the diagnostic info you need .. Latest elementary os with updates in the last 24hrs 1TB SSD, 64GB RAM Alienware PC&lt;/p&gt;&#xA;" OwnerUserId="22835" LastActivityDate="2024-01-24T22:05:50.670" Title="Can't login, recurring password prompt possibly due to filesystem full" Tags="|greeter|security|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24532" PostTypeId="1" AcceptedAnswerId="24537" CreationDate="2020-05-12T11:02:42.690" Score="0" ViewCount="1639" Body="&lt;p&gt;I heard about this app today known as &lt;strong&gt;Albert&lt;/strong&gt; which is an alternative to Spotlight for Linux. I watched a video on YouTube to see how to install the app but when I tried installing the app it said &quot;&lt;em&gt;can't find that package&lt;/em&gt;&quot;.&#xA;I used the following command lines to install the app:-&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:nilarimogard/webupd8&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, I was wondering if it's any better to install such an app on my system and if yes, is there any better alternative for Albert?&lt;/p&gt;&#xA;" OwnerUserId="22852" LastEditorUserId="22852" LastEditDate="2020-05-12T11:08:19.293" LastActivityDate="2020-05-13T18:12:54.607" Title="How to install an app named Albert?" Tags="|software-installation|applications|software-recommendation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24533" PostTypeId="2" ParentId="24532" CreationDate="2020-05-12T11:35:03.113" Score="1" Body="&lt;p&gt;I have checked the source you're referring to. There's no package for ubuntu 18.04 and up. It havn't been updated in 3 years. So you have to find other means to try Albert. &lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-12T11:35:03.113" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24534" PostTypeId="1" CreationDate="2020-05-12T12:01:28.493" Score="0" ViewCount="76" Body="&lt;p&gt;I share my PC with my brother. So, I was wondering if there was any way to lock certain apps. Making another account or a guest account is out of the question. Is there any app to do so?&lt;/p&gt;&#xA;" OwnerUserId="22852" LastActivityDate="2024-01-24T03:04:05.447" Title="Is there a way to lock certain apps?" Tags="|security|software-recommendation|lock|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24535" PostTypeId="2" ParentId="22726" CreationDate="2020-05-12T12:40:23.487" Score="0" Body="&lt;p&gt;I tried to resize it via gsettings but is not working, although the gsettings modification seems to work:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Get actual dimensions:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;$ gsettings  get  io.elementary.switchboard.saved-state window-size&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(1315, 1015)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Change vertical size to a number smaller than screen vertical resolution ( 740 &amp;lt; 768 ) :&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;$ gsettings  set  io.elementary.switchboard.saved-state window-size &quot;(1315,740)&quot;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Check settings are set:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;$ gsettings get io.elementary.switchboard.saved-state window-size&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(1315, 740)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I run switchboard and vertical size is again set as 1015 !!! &#xA;Horizontal size is still with value set by me (1315) but vertical is resizing to this minimum 1015.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Maybe there's a minimum setting established anywhere ??&lt;/p&gt;&#xA;" OwnerUserId="22799" LastActivityDate="2020-05-12T12:40:23.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24536" PostTypeId="2" ParentId="24512" CreationDate="2020-05-12T12:55:03.293" Score="0" Body="&lt;p&gt;There is a button you can use to download it, but the button is part of the internal PDF viewer, so I assume you're unable to use it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can guarantee this won't be fixed because nobody has reported a bug. First step would be a bug report on gitlab.gnome.org.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2020-05-12T12:55:03.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24537" PostTypeId="2" ParentId="24532" CreationDate="2020-05-12T13:17:48.253" Score="1" Body="&lt;p&gt;&lt;s&gt;I also couldn't make Albert work and also learned that it doesn't have nearly as much features as on macOS. &lt;/s&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I finally figured out how to make Albert work.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Remove Albert - only if you already tried installing Albert (First startup of Albert crashed on my system and broke the install)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;killall albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get remove albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf /usr/bin/albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf /usr/share/albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf /home/YOUR_USERNAME/.cache/albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm -rf /home/YOUR_USERNAME/.config/albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/home:manuelschneid3r.list&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-key del E192A257&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get autoremove &amp;amp;&amp;amp; sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Download key and add repository&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;curl https://build.opensuse.org/projects/home:manuelschneid3r/public_key | sudo apt-key add -&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo sh -c &quot;echo 'deb http://download.opensuse.org/repositories/home:/manuelschneid3r/xUbuntu_18.04/ /' &amp;gt; /etc/apt/sources.list.d/home:manuelschneid3r.list&quot;&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Install Albert&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install albert&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You manually have to activate Alberts features in the settings (like file search)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For troubeshooting I recommend starting albert first time from terminal by just typing &quot;albert&quot;. Then you can see potential error messages. &lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Resources:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://albertlauncher.github.io/docs/installing/#importing-the-keyfile&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://albertlauncher.github.io/docs/installing/#importing-the-keyfile&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gi8edf/how_to_install_a_spotlight_like_search_launcher/fqd81te/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/gi8edf/how_to_install_a_spotlight_like_search_launcher/fqd81te/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Best alternative from my point of view is &lt;strong&gt;uLauncher&lt;/strong&gt; combined with the extension &quot;File Search&quot; using fd. &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Installation Steps for uLauncher&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:agornostal/ulauncher&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt install ulauncher&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Installations Steps for File Search&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Download &amp;amp; Installation of fd&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &lt;a href=&quot;https://github.com/sharkdp/fd/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/sharkdp/fd/releases&lt;/a&gt; and download the appropriate package for your system. If you're unsure which package to choose, paste the following in the terminal: &lt;code&gt;uname -a&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It should give you something like e.g.: &lt;code&gt;x86_64&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then download the matching .deb package, e.g.: &lt;code&gt;fd_8.0.0_amd64.deb&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change to &quot;Downloads&quot; dir with: &lt;code&gt;cd &amp;amp;&amp;amp; cd Downloads&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install .deb package with: &lt;code&gt;sudo dpkg -i fd_8.0.0_amd64.deb&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Configuration of fd&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Configure alias for fd to make it work properly: &lt;code&gt;sudo nano ~/.bashrc&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Move to the bottom of the file with the arrow key and paste:&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;# fd search alias used by ulauncher&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;alias fd=fdfind&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Save and exit file with Keys &quot;CTRL+X&quot; then &quot;Y&quot; then &quot;Enter&quot;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Download &amp;amp; Installation of &quot;File Search&quot; uLauncher Extension&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Then execute uLauncher from installed apps. &lt;/li&gt;&#xA;&lt;li&gt;Click the settings button on the right of the small search window. &lt;/li&gt;&#xA;&lt;li&gt;Navigate to extensions tab and click &quot;Add extension&quot;.&lt;/li&gt;&#xA;&lt;li&gt;Paste following link: &lt;a href=&quot;https://github.com/brpaz/ulauncher-file-search&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/brpaz/ulauncher-file-search&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Usage of File Search with uLauncher&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now you can type in uLauncher &quot;fd SEARCHPHRASE&quot; to find dirs/files or &quot;ff SEARCHPHRASE&quot; for files only. For apps you can directly start typing the name without any keyword. &lt;/p&gt;&#xA;" OwnerUserId="22870" LastEditorUserId="22870" LastEditDate="2020-05-13T18:12:54.607" LastActivityDate="2020-05-13T18:12:54.607" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24539" PostTypeId="1" CreationDate="2020-05-12T22:51:26.713" Score="0" ViewCount="81" Body="&lt;p&gt;I have installed elementary OS alongside Win 10 and when I try to open elementary OS I get error message &quot;usci_acpi UBSC0000:00: PPM init failed (-110)&quot; I don't know how I could fix it and I can't really find any help on the internet.&lt;/p&gt;&#xA;" OwnerUserId="22802" LastActivityDate="2024-01-23T06:09:21.160" Title="Problem with starting elementary OS" Tags="|system-installation|settings|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24540" PostTypeId="2" ParentId="24522" CreationDate="2020-05-12T23:02:05.427" Score="1" Body="&lt;ul&gt;&#xA;&lt;li&gt;Download &lt;a href=&quot;https://discordapp.com/api/download?platform=linux&amp;amp;format=deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;discord&lt;/a&gt;, then install &lt;code&gt;sudo dpkg -i discord-*.deb&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Easy way just install discord from flatpak &lt;code&gt;flatpak install flathub com.discordapp.Discord&lt;/code&gt; or you can browse/ search in Appcenter&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2020-11-19T20:14:41.650" LastActivityDate="2020-11-19T20:14:41.650" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24541" PostTypeId="2" ParentId="24539" CreationDate="2020-05-12T23:16:27.240" Score="0" Body="&lt;p&gt;It looks like your problem is the same as &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1850238&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;. hope it helps.&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2020-05-12T23:16:27.240" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24543" PostTypeId="1" CreationDate="2020-05-13T00:51:22.463" Score="0" ViewCount="74" Body="&lt;p&gt;I need help. I bought a signed certificate and got zip file with 4 crt file. now I do not know how to install.... I have no idea where I should copy these file or how to install the certificate to my debian 10 server&lt;/p&gt;&#xA;&#xA;&lt;p&gt;thanks in advance and sorry for my bad english... my german is much better&lt;/p&gt;&#xA;" OwnerUserId="22873" LastActivityDate="2020-05-17T18:52:20.073" Title="need help installing signed certificate on my linux serv" Tags="|settings|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24544" PostTypeId="1" CreationDate="2020-05-13T01:50:39.903" Score="0" ViewCount="48" Body="&lt;p&gt;1 component with updates:&#xA; • teamviewer Remote control and meeting solution. Version: 15.5.3&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is the update my OS is attempting. When I attempt to update it just finishes right away and the OS says I still have an update to complete. any idea on how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="22874" LastActivityDate="2020-05-13T02:16:19.223" Title="OS update not working" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24545" PostTypeId="2" ParentId="24544" CreationDate="2020-05-13T02:16:19.223" Score="1" Body="&lt;p&gt;This fixed it&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get upgrade&lt;/p&gt;&#xA;&#xA;&lt;p&gt;silly me, should have done this first.&lt;/p&gt;&#xA;" OwnerUserId="22874" LastActivityDate="2020-05-13T02:16:19.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24546" PostTypeId="1" CreationDate="2020-05-13T02:23:52.913" Score="0" ViewCount="38" Body="&lt;p&gt;I decided to switch my desktop computer to Ubuntu, but every desktop I have tried has had completely messed up backgrounds. On Budgie, I could temporarily fix it by changing the background, but not on Elementary OS. I have had issues similar to this on another computer, and removing the graphics card fixed it. Unfortunately, that is not an option here. I am using a Nvidia GeForce 7300 LE, if that helps.&#xA;Here are &lt;a href=&quot;https://i.stack.imgur.com/w1gsL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;some various examples.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22875" LastEditorUserId="22875" LastEditDate="2020-05-14T18:13:51.400" LastActivityDate="2020-05-14T18:13:51.400" Title="Desktop Background completely messed up" Tags="|system|nvidia|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24547" PostTypeId="2" ParentId="22008" CreationDate="2020-05-13T07:48:52.290" Score="1" Body="&lt;p&gt;Here's how I solved the flatpak update issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update faltpak in Terminal.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;One package &lt;code&gt;org.freedesktop.Platform.GL.default&lt;/code&gt; found but got error when update.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;List the installed package.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I found the same package is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Uninstall that package.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak uninstall [Application ID]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Update flatpak and it success.&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;flatpak update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Problem solved.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;** Please confirm if it's a correct way. I'm only a normal user and not familiar which what I said above. &lt;/p&gt;&#xA;" OwnerUserId="18318" LastActivityDate="2020-05-13T07:48:52.290" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24548" PostTypeId="1" CreationDate="2020-05-13T08:01:59.057" Score="0" ViewCount="62" Body="&lt;p&gt;I can't find the option to change audio device.&#xA;Only see &lt;a href=&quot;https://i.stack.imgur.com/w3hDZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/w3hDZ.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my goal is to use the audio jack on my motherboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pacmd list-cards&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1 card(s) available.&#xA;    index: 0&#xA;        name: &amp;lt;alsa_card.pci-0000_29_00.1&amp;gt;&#xA;        driver: &amp;lt;module-alsa-card.c&amp;gt;&#xA;        owner module: 7&#xA;        properties:&#xA;                alsa.card = &quot;0&quot;&#xA;                alsa.card_name = &quot;HDA ATI HDMI&quot;&#xA;                alsa.long_card_name = &quot;HDA ATI HDMI at 0xfcf60000 irq 68&quot;&#xA;                alsa.driver_name = &quot;snd_hda_intel&quot;&#xA;                device.bus_path = &quot;pci-0000:29:00.1&quot;&#xA;                sysfs.path = &quot;/devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0&quot;&#xA;                device.bus = &quot;pci&quot;&#xA;                device.vendor.id = &quot;1002&quot;&#xA;                device.vendor.name = &quot;Advanced Micro Devices, Inc. [AMD/ATI]&quot;&#xA;                device.product.id = &quot;aaf0&quot;&#xA;                device.product.name = &quot;Ellesmere [Radeon RX 580]&quot;&#xA;                device.string = &quot;0&quot;&#xA;                device.description = &quot;Ellesmere [Radeon RX 580]&quot;&#xA;                module-udev-detect.discovered = &quot;1&quot;&#xA;                device.icon_name = &quot;audio-card-pci&quot;&#xA;        profiles:&#xA;                output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: no)&#xA;                output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: no)&#xA;                output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: no)&#xA;                output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: no)&#xA;                output:hdmi-surround-extra1: Digital Surround 5.1 (HDMI 2) Output (priority 100, available: no)&#xA;                output:hdmi-surround71-extra1: Digital Surround 7.1 (HDMI 2) Output (priority 100, available: no)&#xA;                output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: no)&#xA;                output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: no)&#xA;                output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: no)&#xA;                output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: unknown)&#xA;                output:hdmi-stereo-extra4: Digital Stereo (HDMI 5) Output (priority 5200, available: no)&#xA;                output:hdmi-surround-extra4: Digital Surround 5.1 (HDMI 5) Output (priority 100, available: no)&#xA;                output:hdmi-surround71-extra4: Digital Surround 7.1 (HDMI 5) Output (priority 100, available: no)&#xA;                output:hdmi-stereo-extra5: Digital Stereo (HDMI 6) Output (priority 5200, available: no)&#xA;                output:hdmi-surround-extra5: Digital Surround 5.1 (HDMI 6) Output (priority 100, available: no)&#xA;                output:hdmi-surround71-extra5: Digital Surround 7.1 (HDMI 6) Output (priority 100, available: no)&#xA;                off: Off (priority 0, available: unknown)&#xA;        active profile: &amp;lt;output:hdmi-stereo-extra3&amp;gt;&#xA;        sinks:&#xA;                alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3/#50: Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)&#xA;        sources:&#xA;                alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3.monitor/#50: Monitor of Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)&#xA;        ports:&#xA;                hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: no)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                                device.product.name = &quot;TV Monitor&quot;&#xA;                hdmi-output-4: HDMI / DisplayPort 5 (priority 5500, latency offset 0 usec, available: no)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                hdmi-output-5: HDMI / DisplayPort 6 (priority 5400, latency offset 0 usec, available: no)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and I run&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pacmd list-sinks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;result:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;1 sink(s) available.&#xA;  * index: 50&#xA;        name: &amp;lt;alsa_output.pci-0000_29_00.1.hdmi-stereo-extra3&amp;gt;&#xA;        driver: &amp;lt;module-alsa-card.c&amp;gt;&#xA;        flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY&#xA;        state: SUSPENDED&#xA;        suspend cause: IDLE &#xA;        priority: 9030&#xA;        volume: front-left: 32889 /  50% / -17,97 dB,   front-right: 32889 /  50% / -17,97 dB&#xA;                balance 0,00&#xA;        base volume: 65536 / 100% / 0,00 dB&#xA;        volume steps: 65537&#xA;        muted: no&#xA;        current latency: 0,00 ms&#xA;        max request: 0 KiB&#xA;        max rewind: 0 KiB&#xA;        monitor source: 50&#xA;        sample spec: s16le 2ch 48000Hz&#xA;        channel map: front-left,front-right&#xA;                     Stereo&#xA;        used by: 0&#xA;        linked by: 2&#xA;        configured latency: 0,00 ms; range is 0,50 .. 341,33 ms&#xA;        card: 0 &amp;lt;alsa_card.pci-0000_29_00.1&amp;gt;&#xA;        module: 7&#xA;        properties:&#xA;                alsa.resolution_bits = &quot;16&quot;&#xA;                device.api = &quot;alsa&quot;&#xA;                device.class = &quot;sound&quot;&#xA;                alsa.class = &quot;generic&quot;&#xA;                alsa.subclass = &quot;generic-mix&quot;&#xA;                alsa.name = &quot;HDMI 3&quot;&#xA;                alsa.id = &quot;HDMI 3&quot;&#xA;                alsa.subdevice = &quot;0&quot;&#xA;                alsa.subdevice_name = &quot;subdevice #0&quot;&#xA;                alsa.device = &quot;9&quot;&#xA;                alsa.card = &quot;0&quot;&#xA;                alsa.card_name = &quot;HDA ATI HDMI&quot;&#xA;                alsa.long_card_name = &quot;HDA ATI HDMI at 0xfcf60000 irq 68&quot;&#xA;                alsa.driver_name = &quot;snd_hda_intel&quot;&#xA;                device.bus_path = &quot;pci-0000:29:00.1&quot;&#xA;                sysfs.path = &quot;/devices/pci0000:00/0000:00:03.1/0000:29:00.1/sound/card0&quot;&#xA;                device.bus = &quot;pci&quot;&#xA;                device.vendor.id = &quot;1002&quot;&#xA;                device.vendor.name = &quot;Advanced Micro Devices, Inc. [AMD/ATI]&quot;&#xA;                device.product.id = &quot;aaf0&quot;&#xA;                device.product.name = &quot;Ellesmere [Radeon RX 580]&quot;&#xA;                device.string = &quot;hdmi:0,3&quot;&#xA;                device.buffering.buffer_size = &quot;65536&quot;&#xA;                device.buffering.fragment_size = &quot;32768&quot;&#xA;                device.access_mode = &quot;mmap+timer&quot;&#xA;                device.profile.name = &quot;hdmi-stereo-extra3&quot;&#xA;                device.profile.description = &quot;Digital Stereo (HDMI 4)&quot;&#xA;                device.description = &quot;Ellesmere [Radeon RX 580] Digital Stereo (HDMI 4)&quot;&#xA;                alsa.mixer_name = &quot;ATI R6xx HDMI&quot;&#xA;                alsa.components = &quot;HDA:1002aa01,00aa0100,00100700&quot;&#xA;                module-udev-detect.discovered = &quot;1&quot;&#xA;                device.icon_name = &quot;audio-card-pci&quot;&#xA;        ports:&#xA;                hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: yes)&#xA;                        properties:&#xA;                                device.icon_name = &quot;video-display&quot;&#xA;                                device.product.name = &quot;TV Monitor&quot;&#xA;        active port: &amp;lt;hdmi-output-3&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I cant's set wit&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;pactl set-card-profile 0 output:analog-stereo&#xA;pactl set-card-profile 0 output:hdmi-stereo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Neither&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It sounds perfect from the monitor but I need it to recognize the audio and microphone jacks to be able to use headphones&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="22879" LastActivityDate="2024-01-24T11:02:55.297" Title="I can't switch hdmi-stereo to analog-stereo" Tags="|graphic-drivers|drivers|audio|ubuntu|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24550" PostTypeId="2" ParentId="18288" CreationDate="2020-05-13T08:15:25.567" Score="0" Body="&lt;p&gt;I know this is an old post, but I'd like those of you owning a Surface Pro 4 (it may work on other models/versions as well) that if you have installed the Hera release and then following &lt;a href=&quot;https://github.com/jakeday/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;Jakeday's&lt;/a&gt; setup, touchscreen and pen will work fine! You probably need to manually add a new grub entry to boot the new modified kernelm but that's a small thing. You can just copy/paste the original &quot;elementary&quot; entry and change initrd and vmlinuz to the ones build by Jakday's script.&lt;/p&gt;&#xA;" OwnerUserId="11969" LastActivityDate="2020-05-13T08:15:25.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24551" PostTypeId="1" CreationDate="2020-05-13T08:59:38.733" Score="0" ViewCount="1480" Body="&lt;p&gt;I'm running Elementary OS on my Macbook from an external USB drive but I thought about installing it on a thumbdrive. Is there a way to install Elementary OS from my current install so that I can just run it (while booted into EOS) rather than creating a boot drive from the .ISO etc?&lt;/p&gt;&#xA;" OwnerUserId="22877" LastEditorUserId="22880" LastEditDate="2020-05-13T09:50:03.420" LastActivityDate="2024-01-23T22:01:50.227" Title="Installing Elementary OS without USB drive or DVD" Tags="|usb|install|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24552" PostTypeId="1" CreationDate="2020-05-13T09:06:41.860" Score="0" ViewCount="77" Body="&lt;p&gt;This happens most often than not. Whenever I create a new folder or file in the File Manager, the whole file manager goes blank. I mean all the existing listing disappears including the one that I just created. Right clicking again brings back everything along with the untitled folder I had just created. Is this a theme thing? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; I use pop-lite theme and ePapirus icon theme.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can see here, I created a new file. But No file icon. Instead, an already existing folder by the name of reg changed to rename node&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bIREn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bIREn.png&quot; alt=&quot;Note Here I created a new file. But No file icon. Instead, an already existing folder by the name of reg changed to rename node&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then after right clicking&#xA;&lt;a href=&quot;https://i.stack.imgur.com/gcE2n.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gcE2n.png&quot; alt=&quot;Then after right clicking&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Elementary OS 5.1.4 Hera.&#xA;Everything updated.&lt;/p&gt;&#xA;" OwnerUserId="22880" LastEditorUserId="22880" LastEditDate="2020-05-21T02:50:32.267" LastActivityDate="2024-02-04T08:01:20.167" Title="File Manager Blank Screen On Create New Folder or File" Tags="|release-hera|pantheon-files|themes|icons|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="24553" PostTypeId="2" ParentId="24531" CreationDate="2020-05-13T09:27:39.313" Score="0" Body="&lt;p&gt;Try the Ctrl + Alt + F1/F2/F3 combo at the login screen and see if it drops down to terminal. You can then login by typing your username and then your password. This will give you a terminal shell.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If, according to you, the problem is storage space then you can execute commands from this terminal (&lt;code&gt;ls&lt;/code&gt;, &lt;code&gt;rm&lt;/code&gt;, &lt;code&gt;cp&lt;/code&gt;, &lt;code&gt;mv&lt;/code&gt;) to list, view, remove, move and copy stuff to other locations in order to free up the space.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Once you think enough space is available you can &lt;code&gt;sudo reboot&lt;/code&gt; to restart and try logging in again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can also use a &lt;strong&gt;live disk or USB&lt;/strong&gt; and boot it to manage the partition size of your current installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I Once Had A Similar Problem&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had this issue once but it was because I messed up my path variables. Ended up fixing it this way. If your path is messed up, you will see that the system won't recognise any command.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can acquire shell access by typing &lt;code&gt;/bin/bash&lt;/code&gt;.&#xA;And then exporting path variables.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;$ export PATH=/bin:/usr/bin:/usr/local/bin&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="22880" LastEditorUserId="22880" LastEditDate="2020-05-14T15:45:13.100" LastActivityDate="2020-05-14T15:45:13.100" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24554" PostTypeId="2" ParentId="24508" CreationDate="2020-05-13T09:41:28.487" Score="0" Body="&lt;p&gt;Thanks for your feedback... :) Well, I &lt;em&gt;think&lt;/em&gt; I sort of fixed it at least temporarily in the meantime; seems the Bluetooth component in some way was (per software?) disabled via rfkill which I &quot;fixed&quot; - but I have no idea how that happened. It's working again, now, and I hope it will stay that way. :)&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2020-05-13T09:41:28.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24555" PostTypeId="2" ParentId="24551" CreationDate="2020-05-13T10:14:56.703" Score="0" Body="&lt;p&gt;The only option that comes to my mind is using the UNetbootin &lt;code&gt;Hard Disk Install Mode&lt;/code&gt;. You can find the details here on &lt;a href=&quot;https://sourceforge.net/p/unetbootin/wiki/installmodes/&quot; rel=&quot;nofollow noreferrer&quot;&gt;UNetbootin Sourceforge page&lt;/a&gt;. I would also refer you to &lt;a href=&quot;https://askubuntu.com/questions/484434/install-ubuntu-without-cd-and-usb-how&quot;&gt;this AskUbuntu question&lt;/a&gt; for step by step process.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I think the hard disk here can be an empty partition on hard disk on the mac book or a new partition on your external usb installation, if you don't want to mess with your mac book hard disk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Latest UNetbootin can be installed via following commands,&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gezakovacs/ppa&#xA;sudo apt-get update&#xA;sudo apt-get install unetbootin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22880" LastActivityDate="2020-05-13T10:14:56.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24557" PostTypeId="1" CreationDate="2020-05-13T14:44:53.280" Score="1" ViewCount="362" Body="&lt;p&gt;I am using elementary OS 5.1.4 Hera, when I connect my my laptop to an external screen and turn &lt;code&gt;Mirror Display&lt;/code&gt; (&lt;strong&gt;ON&lt;/strong&gt;) my laptop screen is so zoomed that I cant see most of the screen no matter what. As you can see in the pic I don't have that much of a space to work with but I can still use the terminal. &#xA;&lt;a href=&quot;https://i.stack.imgur.com/lyfcy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lyfcy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22882" LastEditorUserId="15904" LastEditDate="2020-05-17T18:42:00.367" LastActivityDate="2024-01-28T01:04:15.593" Title="Zoomed in when Mirrored" Tags="|release-hera|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24558" PostTypeId="2" ParentId="24532" CreationDate="2020-05-13T16:14:46.743" Score="1" Body="&lt;p&gt;This should be the official page.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://albertlauncher.github.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://albertlauncher.github.io/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;I found packages support up to xUbuntu 20.04, also can be gotten from repository.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;&lt;a href=&quot;https://software.opensuse.org/download.html?project=home:manuelschneid3r&amp;amp;package=albert&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://software.opensuse.org/download.html?project=home:manuelschneid3r&amp;amp;package=albert&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/frTS1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/frTS1.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It is found in the following page with introduction and setup guide.&lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;Albert is a good Spotlight alternative for Linux April 26, 2019 - by&#xA;  John Been&#xA;  &lt;a href=&quot;https://www.reallinuxuser.com/albert-is-a-good-spotlight-alternative-for-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reallinuxuser.com/albert-is-a-good-spotlight-alternative-for-linux/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;I miss Spotlight from Mac, too.&lt;/p&gt;&#xA;" OwnerUserId="18318" LastEditorUserId="18318" LastEditDate="2020-05-13T16:45:05.223" LastActivityDate="2020-05-13T16:45:05.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24560" PostTypeId="2" ParentId="24534" CreationDate="2020-05-13T18:10:51.397" Score="0" Body="&lt;p&gt;In the system settings you can go to &quot;Screen Time &amp;amp; Limits&quot; (on the bottom, yellow box with parent with kid symbol) and then add the applications the current user shall not be able to open. It might not be comfortable to use if you regularly switch using the PC with your brother. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Honestly I still would recommend giving your brother his own profile and restrict the apps there. You could clone your profile if you want to save the hassle to manually copy stuff the other profile also needs. &lt;/p&gt;&#xA;" OwnerUserId="22870" LastActivityDate="2020-05-13T18:10:51.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24561" PostTypeId="2" ParentId="24557" CreationDate="2020-05-13T18:14:33.530" Score="0" Body="&lt;p&gt;I noticed that there is a glitch that sometimes happens when setting up mirror displays. The pixel doubling option gets enabled when it shouldn't.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;I cannot guarantee the following solutions work! If you get stuck you might need to look up some way to configure display options in the Terminal or TTY.&lt;/strong&gt; Maybe someone can add instructions as another solution or comment to this question.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After applying the display settings and clicking &quot;Keep This Configuration&quot; do one of the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use the tab, arrow and enter keys to get to the pixel doubling setting and disable it &quot;blindly&quot;.&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This is what I did. If you're unfamiliar with this, practice it before applying new display settings.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;li&gt;You might be able to move the window by holding down the Command (also known as Super or Windows) key and the left mouse button to get the pixel doubling option on the screen this way.&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This key and mouse button combination allows you to grab and move a window from any spot, not just the title bar.&lt;/li&gt;&#xA;&lt;/ul&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="12115" LastActivityDate="2020-05-13T18:14:33.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24562" PostTypeId="1" AcceptedAnswerId="24563" CreationDate="2020-05-13T18:39:41.617" Score="2" ViewCount="86" Body="&lt;p&gt;I am trying to take a screenshot of an application with the context menu open.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, pressing &lt;kbd&gt;PrtScn&lt;/kbd&gt; on my keyboard doesn't seem to work with the context menu open. It works fine when it's closed - the result appears in &lt;code&gt;~/Pictures/Screenshots&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other screenshot applications usually require to click a button to capture, which causes the context menu to close.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'd be most grateful for your suggestions.&lt;/p&gt;&#xA;" OwnerUserId="22886" LastActivityDate="2020-05-13T23:22:44.013" Title="Take screenshot with context menu open" Tags="|screenshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24563" PostTypeId="2" ParentId="24562" CreationDate="2020-05-13T23:08:56.133" Score="4" Body="&lt;p&gt;You can use the Screenshot tool application, set a Delay of a few seconds so you will have the time to click with the mouse and the context menu to open for the moment the app grabs the screenshot. &lt;a href=&quot;https://i.stack.imgur.com/khPuT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/khPuT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QQqvu.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QQqvu.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastEditorUserId="12483" LastEditDate="2020-05-13T23:22:44.013" LastActivityDate="2020-05-13T23:22:44.013" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24564" PostTypeId="2" ParentId="24529" CreationDate="2020-05-13T23:32:28.887" Score="2" Body="&lt;p&gt;What I did since the option to use more than 5x3 grid was removed was to downgrade it to a specific version, following this guide &lt;a href=&quot;https://hastebin.atvg-studios.com/dobamidivi.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://hastebin.atvg-studios.com/dobamidivi.txt&lt;/a&gt; After a few updates in order to prevent doing the same again and agian I have locked it for updates with apt-mark, and now I'm crossing my fingers after every update will it work, but it pays the price to have a more comfortable applications list.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As far as I know the devs really like the new view with icons like on your screenshot and I believe there is no option to turn it back without downgrade.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-13T23:32:28.887" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24565" PostTypeId="2" ParentId="24548" CreationDate="2020-05-14T00:14:51.813" Score="0" Body="&lt;p&gt;Not sure if it will help you but more advanced audio control you can have by installing and using &lt;strong&gt;PulseAudio Volume Control&lt;/strong&gt;. Check the AppStore.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-14T00:14:51.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24566" PostTypeId="2" ParentId="24459" CreationDate="2020-05-14T00:37:14.420" Score="0" Body="&lt;p&gt;There is an easier option to use &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;p&lt;/kbd&gt; to cycle display modes, this way with a few pressings on the &lt;kbd&gt;p&lt;/kbd&gt; key while you hold the &lt;kbd&gt;Super&lt;/kbd&gt; key you will go through all setups until you have the one with the diabled secondary monitor. I believe your settings are saved into &lt;code&gt;~/.config/monitors.xml&lt;/code&gt; file, but for some reason after restart the OS searches for a dual monitor setup and starts with it first. What I did before for a simular problem was to edit this file and remove all the settings excluding the monitor setup I want to use, but it was not permanent for a long time.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;note&lt;/strong&gt;: &lt;code&gt;~&lt;/code&gt; above means your home folder.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-14T00:37:14.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24567" PostTypeId="2" ParentId="24527" CreationDate="2020-05-14T00:45:24.997" Score="0" Body="&lt;p&gt;I do not know about the exclamation points, but files which start with a dot &lt;code&gt;.&lt;/code&gt; are considered as Hidden Files, and if you want to see them into the files application, you have to enable &lt;strong&gt;Show hidden files&lt;/strong&gt; by a right click into an empty space in the Files application window and setting on the corresponding checkbox in the context menu.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-14T00:45:24.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24569" PostTypeId="1" CreationDate="2020-05-14T08:07:08.520" Score="0" ViewCount="51" Body="&lt;p&gt;When I open Android Studio (installed through appcenter), an extra cog icon appear at the end of the dock. Why is that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jdEmL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jdEmL.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22833" LastActivityDate="2020-05-14T08:07:08.520" Title="Extra Icon at the Dock" Tags="|appcenter|plank|launcher|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24571" PostTypeId="1" CreationDate="2020-05-14T16:59:30.340" Score="0" ViewCount="63" Body="&lt;p&gt;I recently installed Elementary on my 2009 MacBook Pro. Every time I start up and log in the system becomes unresponsive within minutes (maybe even within seconds.) The mouse continues to work and I can move the cursor, but not click anything. After several minutes one of the actions I have tried happens then it hangs again. For example, a new tab opens in Epiphany, but it is otherwise unresponsive. Eventually I have to shut it down (hard reboot, or get to a Terminal and shutdown more gracefully - I think that was CTRL+ALT+F1 that worked, although I tried lots of shortcut combinations and one of them seemed to work but only after several minutes.) It happens even if only Epiphany is running. One time I noticed blue dots underneath a couple of the applications in the dock, but a red dot under the appcenter one. That wasn't true every time it happened. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The system is not usable as it is, I would like to know any troubleshooting tips anyone can give me as I need to figure out whether this is fixable, or a hardware problem with the mbp (I had a suspicion of something not right with the hardware before install because it didn't work with later versions of MAC OS, but it ran OS X Snow Leopard fine.) &lt;/p&gt;&#xA;" OwnerUserId="22897" LastActivityDate="2024-02-26T21:05:25.647" Title="System always hangs shortly after login on 2009 macbook pro" Tags="|macbook|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24572" PostTypeId="2" ParentId="24422" CreationDate="2020-05-14T18:35:55.743" Score="0" Body="&lt;p&gt;Did you type sudo mount -a&#xA;and then sudo mount after you changed in /etc/fstab ?&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-14T18:35:55.743" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24574" PostTypeId="1" AcceptedAnswerId="24576" CreationDate="2020-05-15T12:08:58.617" Score="1" ViewCount="187" Body="&lt;p&gt;I'm using Elementary Juno, as a first entry in the world of linux. So far I dont know much, especially when it comes to use the terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I managed to install Wine, but I still have an error left : &quot;'dl.winehq.org/wine-builds/ubuntu hera Release' does not have a Release file&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried one workaround posted here in reply of the same problem, but it didnt work : &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;To solve the error open terminal and run:&#xA;sudo add-apt-repository --remove ppa:versable/elementary-update&#xA;For hash sum mismatch run:&#xA;sudo rm -rf /var/lib/apt/lists/*&#xA;Now run:&#xA;sudo apt-get update&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In the end I still get the same error about 'dl.winehq.org/wine-builds/ubuntu hera Release' not having a Release file, and something about the updates that cant be done because its not secured. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be much appreciated :)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;// &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit : @Vlad Pop, here's the content of my sources.list file.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;###### Ubuntu Main Repos&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic main restricted universe multiverse&#xA;&#xA;###### Ubuntu Update Repos&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-updates main restricted universe multiverse&#xA;deb http://fr.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;###### Ubuntu Partner Repo&#xA;deb http://archive.canonical.com/ubuntu bionic partner&#xA;deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;# deb-src https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;# deb-src https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;# deb-src https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;deb https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/ ./&#xA;# deb-src https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/ ./&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22902" LastEditorUserId="22902" LastEditDate="2020-05-19T13:27:29.070" LastActivityDate="2020-05-19T13:27:29.070" Title="help fixing winehq error : hera Release does not have a Release file" Tags="|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24576" PostTypeId="2" ParentId="24574" CreationDate="2020-05-15T18:55:14.283" Score="0" Body="&lt;p&gt;The problem is that you have an incorrect repository defined in your sorces list. There is no 'hera' distribution at &lt;a href=&quot;https://dl.winehq.org/wine-builds/ubuntu/dists/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dl.winehq.org/wine-builds/ubuntu/dists/&lt;/a&gt;; but there is a bionic one (elementary OS hera is based on Ubuntu 18.04 bionic)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What you'll have to do is to edit the &lt;code&gt;/etc/apt/sources.list&lt;/code&gt; file and replace &lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt; in the line that reads:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb https://dl.winehq.org/wine-builds/ubuntu/ hera main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;so that it becomes&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You'll need sudo privileges for this: right-click the Files app -&gt; New Window as Administrator -&gt; navigate to /etc/apt -&gt; open sources.list in Code -&gt; carefully edit and save -&gt; run &lt;code&gt;sudo apt update&lt;/code&gt; to verify the changes.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-05-15T18:55:14.283" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24577" PostTypeId="1" CreationDate="2020-05-15T19:04:19.577" Score="0" ViewCount="303" Body="&lt;p&gt;Description:    elementary OS 5.1.4 Hera middle mouse button copy and paste not working as expected&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Being a *nix user since the 80s, I'm kind of attached to middle mouse button copy and paste working in the terminal. Is this something I can enable in io.elementary.terminal?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;xterm middle mouse button copy and paste works as expected, for example.&lt;/p&gt;&#xA;" OwnerUserId="22906" LastEditorUserId="15904" LastEditDate="2020-06-01T07:59:40.560" LastActivityDate="2024-01-12T22:03:25.373" Title="middle mouse button copy and paste in io.elementary.terminal" Tags="|release-hera|pantheon-terminal|elementary-project|xorg|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24578" PostTypeId="2" ParentId="24324" CreationDate="2020-05-15T20:00:23.313" Score="1" Body="&lt;p&gt;Go to system settings, then &quot;language &amp;amp; region&quot; and use the &quot;plus symbol&quot; in the lower left of the window to add Japanese as an language. Set region and format as you like. These steps might be optional, I didn't try. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then click to keyboard settings (lower most left big button). Again click the &quot;plus symbol&quot; on the lower left and search for japanese. When you single click to it, choose a layout to your liking. You can inspect the layout with the small button on the lower left depicting a small latin &quot;a&quot;. For some reason the Standard layout is not with any japanese symbols. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also note that in the same main window you got additional &quot;input method settings&quot; as a button on the lower right. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reboot or logout to make the new keyboard settings work. You should now have a symbol in the top menu bar where you can switch and inspect your configured keyboard languages &amp;amp; layouts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you have issues with IBus&lt;/strong&gt; not being the &quot;default input method&quot; you can follow the instructions from here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2371/how-can-i-use-ibus-as-the-default-input-method&quot;&gt;How can I use IBus as the default input method?&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you need other layouts like Hiragana&lt;/strong&gt; you can check out the instructions here: &lt;a href=&quot;https://askubuntu.com/questions/28669/how-do-i-get-keyboard-to-write-hiragana-instead-of-katakana&quot;&gt;https://askubuntu.com/questions/28669/how-do-i-get-keyboard-to-write-hiragana-instead-of-katakana&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;If you like the terminal&lt;/strong&gt; you can always use &lt;code&gt;sudo dpkg-reconfigure keyboard-configuration&lt;/code&gt; for the same stuff.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As a sitenote: I just messed up my own keyboard settings with trying this and for some reason I always need two configured languages for the keyboard so it's working properly. &lt;/p&gt;&#xA;" OwnerUserId="22870" LastEditorUserId="22870" LastEditDate="2020-05-17T14:09:30.747" LastActivityDate="2020-05-17T14:09:30.747" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24579" PostTypeId="2" ParentId="2644" CreationDate="2020-05-16T02:14:12.250" Score="0" Body="&lt;p&gt;Its elementary-tweaks.&#xA;I faced a similar problem while trying to maximise the settings app but when I uninstalled tweaks, it worked fine!&lt;/p&gt;&#xA;" OwnerUserId="22910" LastActivityDate="2020-05-16T02:14:12.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24582" PostTypeId="1" CreationDate="2020-05-16T08:49:16.630" Score="2" ViewCount="321" Body="&lt;p&gt;As WireGuard is now becoming more used, and implemented, and available trough the main kernel, it would be nice to provide support for WireGuard in the network-settings (VPN), by upgrading the NetworkManager to one of the latest versions that do support WireGuard. Is this possible on short-term?&lt;/p&gt;&#xA;" OwnerUserId="22911" LastActivityDate="2020-05-16T08:49:16.630" Title="Support for WireGuard in NetworkManager" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24583" PostTypeId="2" ParentId="24324" CreationDate="2020-05-16T13:51:52.567" Score="1" Body="&lt;p&gt;Please note &lt;em&gt;Keyobard layout&lt;/em&gt; and &lt;em&gt;Input Method&lt;/em&gt; are seperated. &lt;em&gt;Keyboard layout&lt;/em&gt; should follow your physical keyboard. Then add the required &lt;em&gt;Input Method&lt;/em&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also, for the Japanese keyboard layout found in eOS. I found no way to do transform and only Katakana can be inputted.&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;For adding &lt;em&gt;Input Method&lt;/em&gt;, please follow these steps.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;System Settings &gt; Keyboard&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hwANA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hwANA.png&quot; alt=&quot;System Settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Keyboard &gt; Input Method Settings...&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/j86gG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j86gG.png&quot; alt=&quot;Keyboard&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;IBus Preferences &gt; Input Method &gt; Add&lt;/strong&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mdTqA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mdTqA.png&quot; alt=&quot;IBus Preferences&quot;&gt;&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;strong&gt;Pick the required language&lt;/strong&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CG2md.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CG2md.png&quot; alt=&quot;IBus Preferences&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Pick the input method.&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9UHr9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9UHr9.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Under &lt;strong&gt;General&lt;/strong&gt; tag, set the &lt;strong&gt;Keyboard Shortcuts&lt;/strong&gt; for changing input method. Tweak other settings to fit your needs.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;*Please note &lt;strong&gt;Show icon on system tray&lt;/strong&gt; don't work by default as eOS removed support.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/u6WYg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/u6WYg.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here is the pop-up menu for changing input method.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eVKaO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eVKaO.png&quot; alt=&quot;IBus input select&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Choosing character type by clcking that &lt;code&gt;A&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jsH0R.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jsH0R.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18318" LastEditorUserId="18318" LastEditDate="2020-05-18T05:17:01.387" LastActivityDate="2020-05-18T05:17:01.387" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="24586" PostTypeId="2" ParentId="24530" CreationDate="2020-05-16T21:04:36.177" Score="3" Body="&lt;p&gt;&lt;strong&gt;Solution which removes Applications name from the panel&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you do not have vim, then install it with below command in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install vim&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then type in terminal for example like below: (bear in mind that Nordic is a name of my theme which I am using currently, the default one is /usr/share/themes/elementary/gtk-3.0/gtk.css)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo vim /usr/share/themes/Nordic/gtk-3.0/gtk.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hit button with symbol / on a keyboard type .panel.maximized to find this section and hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hit insert to edit file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;comment it out like that for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/** .panel.maximized {&#xA;    background-color: #000; }&#xA; **/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then put this into this file below the commented our fragment:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel.maximized &amp;gt; .horizontal:first-child &amp;gt; :first-child, &#xA;.panel.color-dark &amp;gt; .horizontal:first-child &amp;gt; :first-child {&#xA;    font-size:0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hit esc on a keyboard and then type :x and hit enter to save and exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and log in again. Applications text will disappear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gj6l0n/thinner_titlebars_how_to_make_elementaryos_look/?utm_source=share&amp;amp;utm_medium=web2x&quot; rel=&quot;nofollow noreferrer&quot;&gt;Remove the Applications text on the top panel in Elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-17T10:54:03.400" LastActivityDate="2020-05-17T10:54:03.400" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24588" PostTypeId="2" ParentId="21691" CreationDate="2020-05-17T07:49:57.703" Score="0" Body="&lt;p&gt;Check who is the owner of .Xauthority file. It should be a user instead of root.&lt;/p&gt;&#xA;&lt;p&gt;Press ctrl alt and F1 for example. Login. Then type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Username of course is the name of the user you are using to login to system.&#xA;Then type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ls -al&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You will see who is the owner of the .Xauthority.&#xA;If root root&#xA;then type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown username:username .Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After that you should be able to login.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-18T18:23:37.507" LastActivityDate="2020-06-18T18:23:37.507" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24589" PostTypeId="2" ParentId="24530" CreationDate="2020-05-17T08:29:58.553" Score="2" Body="&lt;p&gt;&lt;strong&gt;For elementary-x theme you need to edit it here:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/home/yourusername/.themes/elementary-x/gtk-3.0/apps.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or if you have it in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/themes/elementary-x/gtk-3.0/apps.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Depends on where did you install the theme for user or for all users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/surajmandalcell/elementary-x/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/surajmandalcell/elementary-x/blob/master/README.md&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;As you can read here:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; git clone https://github.com/surajmandalcell/elementary-x.git ~/.themes/elementary-x&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This copies the git to user location.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo mv /home/yourusername/.themes/elementary-x /usr/share/themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;will move it to the location where the theme will be accessible for all users - just an explanation for those who have only one machine and many users.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Check this: &lt;a href=&quot;https://github.com/surajmandalcell/elementary-x/blob/master/gtk-3.0/apps.css&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/surajmandalcell/elementary-x/blob/master/gtk-3.0/apps.css&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the tutorial will look like this below:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Type in terminal for example like below: (bear in mind that elementary-x is a name of my theme which I am using currently, the default one is /usr/share/themes/elementary/gtk-3.0/gtk.css)&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /usr/share/themes/elementary-x/gtk-3.0/apps.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hit button with symbol / on a keyboard type .panel.maximized to find this section and hit enter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;hit insert to edit file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;comment it out like that for example:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/** .panel.maximized {&#xA;     background-color: #000; }&#xA; **/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then put this into this file below the commented our fragment:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel.maximized &amp;gt; .horizontal:first-child &amp;gt; :first-child, &#xA;.panel.color-dark &amp;gt; .horizontal:first-child &amp;gt; :first-child {&#xA;    font-size:0px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;hit esc on a keyboard and then type :x and hit enter to save and exit.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Log out and log in again. Applications text will disappear.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-17T10:52:10.717" LastActivityDate="2020-05-17T10:52:10.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24591" PostTypeId="2" ParentId="24530" CreationDate="2020-05-17T08:43:37.773" Score="0" Body="&lt;p&gt;&lt;strong&gt;This solution is wrong, below is correct solution. Treat this as a way of investigation, please.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Above &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; /** .panel.maximized {&#xA;    background-color: #000; }&#xA; **/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You will find:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*********&#xA; * Panel *&#xA; ********/&#xA;.panel {&#xA;  background-color: transparent;&#xA;  transition: all 100ms ease-in-out;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Change it to:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;/*********&#xA; * Panel *&#xA; ********/&#xA;.panel {&#xA;  background-color: transparent;&#xA;  transition: all 100ms ease-in-out;&#xA;  background-image: url(&quot;elementaryicon.png&quot;);&#xA;  background-repeat: no-repeat;&#xA;  font-size:0px !important; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And put the elementary os icon 15x15 px or 20x20 px in directory where gtk.css or apps.css file is located. See guide above.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only one thing left to solve it - how to get rid the magnifier icon.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Small edit:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The text is hard-coded here: &lt;a href=&quot;https://github.com/elementary/applications-menu/blob/master/src/Indicator.vala#L75&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/blob/master/src/Indicator.vala#L75&lt;/a&gt;, and the icon three lines below that: &lt;a href=&quot;https://github.com/elementary/applications-menu/blob/master/src/Indicator.vala#L78&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/blob/master/src/Indicator.vala#L78&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also wish they were customizable, but I doubt upstream is interested in supporting this kind of minor tweak (The elementary OS design is intended to be good enough that small tweaks like this are not important).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway I will try to download it and recompile it the way I want. Just need to figure it out, where or how this search icon is rendered. Then the simple replacement and recompilation should just replace the search icon with the Elementary OS logo.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-17T10:50:30.860" LastActivityDate="2020-05-17T10:50:30.860" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24592" PostTypeId="2" ParentId="24530" CreationDate="2020-05-17T10:42:37.763" Score="2" Body="&lt;p&gt;&lt;strong&gt;The final solution: How to replace the magnifier/search icon using Inkscape&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;See like this as an example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; /usr/share/icons/McMojave-circle-dark/actions/symbolic/system-search-symbolic.svg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So replace the icon using&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo inkscape (to run as root) &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with the elementary OS logo. I suppose you know how to open the mentioned svg file in Inkscape and do it. Save it. Then hide the Applications name using my method described above and the issue is solved.&lt;/p&gt;&#xA;&lt;p&gt;Examples of paths where the icon can be stored:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/icons/Adwaita/16x16/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/24x24/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/32x32/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/48x48/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/64x64/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/96x96/actions/system-search-symbolic.symbolic.png&#xA;/usr/share/icons/Adwaita/scalable/actions/system-search-symbolic.svg&#xA;/usr/share/icons/McMojave-circle/actions/symbolic/system-search-symbolic.svg&#xA;/usr/share/icons/McMojave-circle-dark/actions/symbolic/system-search-symbolic.svg&#xA;/usr/share/icons/Paper/scalable/actions/system-search-symbolic.svg&#xA;/usr/share/icons/elementary/actions/24/system-search-symbolic.svg&#xA;/usr/share/icons/elementary/actions/symbolic/system-search-symbolic.svg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Or just replace the file. Zipped logos for you.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://we.tl/t-9aVAY0kqF8&quot; rel=&quot;nofollow noreferrer&quot;&gt;Zipped logos in new format&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://we.tl/t-OWUMs9NDQW&quot; rel=&quot;nofollow noreferrer&quot;&gt;Zipped logo in old format&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Explanation: &lt;a href=&quot;https://commons.wikimedia.org/wiki/File:Elementary_logo.svg&quot; rel=&quot;nofollow noreferrer&quot;&gt;Types of Elementary OS logo&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;OR //update Feb2021&#xA;go to usr/share/icons/Themename/actions/symbolic/ and rename the system-search-symbolic.svg file to something else ,say system-search-symbolic1.svg and save the icon you intend to use as system-search-symbolic.svg.&#xA;This is a low skill ,reversible workaround for the guys who are not to confident with command promt or editing .css files.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="-1" LastEditDate="2021-02-10T23:13:07.200" LastActivityDate="2021-02-10T23:13:07.200" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24593" PostTypeId="2" ParentId="23982" CreationDate="2020-05-17T11:51:56.317" Score="0" Body="&lt;p&gt;Windows 10 has an issue with it's driver enumerators, not just for some display combinations, but Realtek audio and some Bluetooth as well. The've been slowly...very slowly..working it out. Until they handle it, or someone else figures it out, the easiest solution is to change drivers whenever you change devices, manually. Don't listen to what you're told, find your own drivers.&lt;/p&gt;&#xA;" OwnerUserId="22926" LastActivityDate="2020-05-17T11:51:56.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24594" PostTypeId="2" ParentId="24571" CreationDate="2020-05-17T12:08:19.497" Score="0" Body="&lt;p&gt;OK thank you to all who read this, I have now found the problem. It seems that starting Epiphany causes the system to hang. I had though that as that was the browser that came with the installation it should be OK but on my 2009 MacBook Pro it causes instability. I'm now using Firefox and that's working fine. &lt;/p&gt;&#xA;" OwnerUserId="22897" LastActivityDate="2020-05-17T12:08:19.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24595" PostTypeId="1" CreationDate="2020-05-17T13:54:59.370" Score="0" ViewCount="253" Body="&lt;p&gt;Absolutely no idea what I'm doing wrong. This is a fresh install of Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I installed the OS&lt;/li&gt;&#xA;&lt;li&gt;Made sure to install drivers during the OS installation&lt;/li&gt;&#xA;&lt;li&gt;Once the os was loaded I checked out the &quot;Nvidia X Server Settings&quot;, unfortunately it was completely blank.&lt;/li&gt;&#xA;&lt;li&gt;Purged Nvidia&lt;/li&gt;&#xA;&lt;li&gt;Reinstalled (followed &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/19219/gpu-not-detected&quot;&gt;this guide&lt;/a&gt;, but installed &lt;code&gt;nvidia-driver-440&lt;/code&gt; instead)&lt;/li&gt;&#xA;&lt;li&gt;On reboot the Nvidia X Server Settings show that I'm using discrete graphics, however there are no other options aside from switching back to integrated&lt;/li&gt;&#xA;&lt;li&gt;If I switch to integrated, reboot, then switch to discrete once more my system doesn't boot and shows me a black screen after the Elementary OS logo. This can only be fixed by running &lt;code&gt;sudo prime-select intel&lt;/code&gt; in the recovery shell.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;What's happening? Is there any way to fix it? I know &lt;code&gt;nvidia-driver-440&lt;/code&gt; works as I was using it on Pop_os just the other day on the same laptop. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Running nvidia-smi outputs this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-smi&#xA;NVIDIA-SMI has failed because it couldn't communicate with the NVIDIA driver. Make sure that the latest NVIDIA driver is installed and running.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;My discrete card is a &lt;code&gt;NVIDIA Corporation GP108M [GeForce MX150] (rev a1)&lt;/code&gt;, and it does appear under &lt;code&gt;Settings &amp;gt; About&lt;/code&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any suggestions would be very appreciated.&lt;/p&gt;&#xA;" OwnerUserId="22929" LastActivityDate="2024-01-27T22:04:45.543" Title="Nvidia drivers boot to black screen, purging doesn't help" Tags="|release-hera|graphic-drivers|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24596" PostTypeId="2" ParentId="24595" CreationDate="2020-05-17T15:51:43.347" Score="0" Body="&lt;p&gt;The issue seems to have been related to secure boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hadn't set an admin password in my BIOS, which I suppose was required? So while I had disabled secure boot at some point in the past, this specific setting had been reset or was being ignored by the lack of an admin pass.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Setting the password solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="22929" LastActivityDate="2020-05-17T15:51:43.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24597" PostTypeId="1" AcceptedAnswerId="24599" CreationDate="2020-05-17T16:34:09.480" Score="1" ViewCount="92" Body="&lt;p&gt;I know that many people asked this question. But I can't simply install WINE on my laptop&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here is one of many guides I followed: &lt;a href=&quot;https://wiki.winehq.org/Ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;LINK&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;basically I'm getting errors after typing the following command: &lt;code&gt;sudo add-apt-repository 'deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main'&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04 ./ InRelease&#xA;Hit:2 http://am.archive.ubuntu.com/ubuntu bionic InRelease                                                                                                  &#xA;Hit:3 http://am.archive.ubuntu.com/ubuntu bionic-updates InRelease                                                                                          &#xA;Hit:4 http://am.archive.ubuntu.com/ubuntu bionic-backports InRelease                                                                                        &#xA;Get:5 http://packages.elementary.io/appcenter bionic InRelease [5,909 B]                                                                                    &#xA;Hit:6 http://security.ubuntu.com/ubuntu bionic-security InRelease                                                                                           &#xA;Hit:7 http://ppa.launchpad.net/cybermax-dexter/sdl2-backport/ubuntu bionic InRelease                                                                        &#xA;Hit:8 https://dl.winehq.org/wine-builds/ubuntu focal InRelease                                                                                              &#xA;Hit:9 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                                                 &#xA;Hit:10 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                                                            &#xA;Hit:11 https://packages.microsoft.com/ubuntu/18.04/mssql-server-2019 bionic InRelease                                                                       &#xA;Hit:12 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease                                                     &#xA;Hit:13 http://deb.playonlinux.com bionic InRelease                                                                                         &#xA;Hit:14 https://packages.lunarg.com/vulkan/1.2.131 bionic InRelease                                                                              &#xA;Ign:15 http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu bionic InRelease                                                                         &#xA;Hit:16 https://packages.microsoft.com/ubuntu/19.10/prod eoan InRelease                                                    &#xA;Err:17 http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu bionic Release                                                                           &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Hit:18 https://dl.winehq.org/wine-builds/ubuntu eoan InRelease                                                                                  &#xA;Hit:19 https://packages.microsoft.com/ubuntu/18.04/prod bionic InRelease                       &#xA;Get:20 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [240 kB]&#xA;Hit:21 https://dl.winehq.org/wine-builds/ubuntu bionic InRelease                            &#xA;Reading package lists... Done &#xA;N: Ignoring file 'winehq.key' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'ubuntu-wine-ubuntu-ppa-bionic.list.backup' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;E: The repository 'http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I thought maybe ignoring the error will fix my problem :) &#xA;but it didn't (who would have thought)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;output of &lt;code&gt;sudo apt install --install-recommends winehq-stable&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; winehq-stable : Depends: wine-stable (= 5.0.0~eoan)&#xA;N: Ignoring file 'winehq.key' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;N: Ignoring file 'ubuntu-wine-ubuntu-ppa-bionic.list.backup' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22931" LastActivityDate="2020-05-17T19:06:43.973" Title="Installing WINE on Hera" Tags="|software-installation|wine|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24598" PostTypeId="2" ParentId="24543" CreationDate="2020-05-17T18:47:01.857" Score="1" Body="&lt;p&gt;If you are using Apache on Debian then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /etc/apache2/sites-available/example.com-ssl.conf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Press insert (inc) button on a keyboard to edit a file&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Add like this at the end before closing . See example below:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;            SecRuleEngine On&#xA;            SSLCertificateFile /etc/ssl/certs/example.com/cert.pem&#xA;            SSLCertificateKeyFile /etc/ssl/certs/example.com/privkey.pem&#xA;            SSLCertificateChainFile /etc/ssl/certs/example.com/chain.pem&#xA;    &amp;lt;/VirtualHost&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Press Esc button on a keyboard, then type :x and hit Enter. It will save the file.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo a2ensite example.com.conf&#xA;sudo apache2ctl configtest&#xA;sudo systemctl restart apache2 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Hope this explains how it should be done.&#xA;If you need the whole virtual host let me know, anyway you should read how to create virtual host in Apache for SSL.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good example how to do it step by step is described here:&#xA;&lt;a href=&quot;https://www.digitalocean.com/community/tutorials/how-to-install-the-apache-web-server-on-debian-9&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.digitalocean.com/community/tutorials/how-to-install-the-apache-web-server-on-debian-9&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-17T18:52:20.073" LastActivityDate="2020-05-17T18:52:20.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24599" PostTypeId="2" ParentId="24597" CreationDate="2020-05-17T18:55:40.040" Score="1" Body="&lt;p&gt;First, the files &lt;code&gt;winehq.key&lt;/code&gt; and &lt;code&gt;ubuntu-wine-ubuntu-ppa-bionic.list.backup&lt;/code&gt; have no place in &lt;code&gt;/etc/apt/sources.list.d/&lt;/code&gt;. The &lt;code&gt;.key&lt;/code&gt; files can be safely deleted after adding them. Read more about the apt folders &lt;a href=&quot;https://manpages.debian.org/stretch/apt/sources.list.5.en.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Second, the instructions on the winehq site are incomplete as they themselves admit it:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ugyVy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ugyVy.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;br&gt;&#xA;So, use the instructions from &lt;a href=&quot;https://linuxize.com/post/how-to-install-wine-on-ubuntu-18-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; to add a new repository containing the required packages, and hope for the best :D.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;EDIT:  &lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;please remove the &lt;code&gt;http://ppa.launchpad.net/ubuntu-wine/ppa/ubuntu&lt;/code&gt; repository, it contains nothing useful since xenial and I think it is no longer maintained (Err:17 in your post)&lt;/li&gt;&#xA;&lt;li&gt;there should be no &lt;code&gt;eoan&lt;/code&gt; anywhere in your sources list, so comment or remove the &lt;code&gt;https://dl.winehq.org/wine-builds/ubuntu eoan&lt;/code&gt; from your &lt;code&gt;sources.list&lt;/code&gt; file (should also solve the &lt;code&gt;Depends: wine-stable (= 5.0.0~eoan)&lt;/code&gt; error)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-05-17T19:06:43.973" LastActivityDate="2020-05-17T19:06:43.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24600" PostTypeId="1" AcceptedAnswerId="24622" CreationDate="2020-05-17T22:52:17.890" Score="0" ViewCount="462" Body="&lt;p&gt;&lt;strong&gt;Here are the key details:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell Latitude E6530&lt;/li&gt;&#xA;&lt;li&gt;NVIDIA NVS 5200m with Optimus&lt;/li&gt;&#xA;&lt;li&gt;Hera 5.1.4&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What is happening:&lt;/strong&gt;&#xA;My keyboard and mouse stop working when the desktop loads. I can use the input devices in the BIOS and in the recovery terminal. Prior to this issue, the laptop worked perfectly. I could play Steam games, browse the web, use the terminal, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;When it started:&lt;/strong&gt;&#xA;I updated my driver to nvidia’s 435 driver, and in the next reboot my keyboard, trackpad, USB mouse and USB keyboard are entirely unresponsive.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;What I’ve tried:&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Purging and reinstalling the old driver&lt;/li&gt;&#xA;&lt;li&gt;Switching the selected graphics card in &lt;code&gt;nvidia-settings&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Quietly sneaking up on my laptop while wearing a wig and fake mustache and quickly booting it before it&#xA;recognizes me&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Any suggestions as to what is going on, and how I can fix it?&lt;/p&gt;&#xA;" OwnerUserId="22933" LastActivityDate="2020-05-18T22:35:06.420" Title="Why did my keyboard and mouse stop working in X after updating Nvidia driver?" Tags="|desktop|nvidia|xorg|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24601" PostTypeId="2" ParentId="20849" CreationDate="2020-05-17T23:38:03.130" Score="0" Body="&lt;p&gt;On version 5.1.....&#xA;Open Terminal,&#xA;Paste &quot; sudo apt-get install bcmwl-kernel-source &quot; and press 'Entere'.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;that's it!&#xA;and MY thank to whoever posted it originally.&lt;/p&gt;&#xA;" OwnerUserId="22934" LastActivityDate="2020-05-17T23:38:03.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24602" PostTypeId="1" CreationDate="2020-05-18T00:56:23.523" Score="0" ViewCount="33" Body="&lt;p&gt;I installed and removed the epic store through lutris. Unfortunately the icon remained. How do I remove it?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MldkG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MldkG.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22936" LastActivityDate="2020-05-20T23:55:30.733" Title="Icon remains after removal" Tags="|icons|menu|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24603" PostTypeId="2" ParentId="24602" CreationDate="2020-05-18T01:47:06.383" Score="1" Body="&lt;p&gt;By using AppEditor can you delete/modify/add entries of slingshot. Open the terminal and type;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install com.github.donadigo.appeditor&#xA;com.github.donadigo.appeditor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or search the App Center for &lt;strong&gt;appeditor&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-18T01:47:06.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24604" PostTypeId="2" ParentId="7825" CreationDate="2020-05-18T03:53:28.923" Score="0" Body="&lt;p&gt;I just had to go through this myself.. and with the info provided by wolf I was able to piece together the rest of it with a little bit of digging and I will answer your question to him in the comments.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also to note - this is on the latest Hera version, so mileage may vary with Loki given the age of the post.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to activate that prompt.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;# run wingpanel if it isn't running already&#xA;&#xA;dbus-send --print-reply --dest=&quot;org.gnome.Shell&quot; /org/gnome/SessionManager/EndSessionDialog org.gnome.SessionManager.EndSessionDialog.Open uint32:2 uint32:0 uint32:60 array:objpath:/org/gnome/SessionManager/EndSessionDialog&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Note: I am using a different DE - mate. Ideally I should kill wingpanel in like 10 seconds or so if there is no activity&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to logoff directly?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This took a lot of different tries, but finally I came up with this. It is important that both run or you will not log back in well.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;loginctl kill-session $XDG_SESSION_ID; loginctl terminate-session $XDG_SESSION_ID&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;As a scripted solution though the above logoff code does not work, you will need to use the wingpanel still and the following for the dialog prompt first&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dbus-send --session --type=method_call --print-reply --dest=org.gnome.SessionManager /org/gnome/SessionManager org.gnome.SessionManager.Logout uint32:1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18707" LastEditorUserId="18707" LastEditDate="2020-05-18T05:01:30.493" LastActivityDate="2020-05-18T05:01:30.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24605" PostTypeId="2" ParentId="17527" CreationDate="2020-05-18T05:25:04.013" Score="0" Body="&lt;p&gt;How to solve the issue when your system freezes for few seconds from time to time or at all and you have similar information in /var/log/syslog after typing the command?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;grep 'Resetting' /var/log/syslog&#xA;&#xA;May 18 06:30:35 DELL kernel: [  499.929699] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:34:48 DELL kernel: [  753.880818] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:40:02 DELL kernel: [ 1067.896600] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:42:10 DELL kernel: [ 1195.896294] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:45:50 DELL kernel: [ 1415.895996] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:47:45 DELL kernel: [ 1530.903906] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:54:21 DELL kernel: [ 1926.903712] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 06:57:51 DELL kernel: [ 2136.887378] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;May 18 07:01:29 DELL kernel: [ 2354.870458] i915 0000:00:02.0: Resetting rcs0 for hang on rcs0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/224240/why-is-the-intel-hd-graphics-driver-called-i915&quot;&gt;Explanation for i915 chipset&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you randomly encounter total system freezes, or it freezes from time to time for few seconds and you have i915 Intel GPU (Intel HD Graphics), the following kernel option is a workaround:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;intel_idle.max_cstate=1 i915.enable_dc=0 i915.enable_fbc=0 i915.enable_psr=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;On new Intel GPUs Elementary OS and also Ubuntu freezes sometimes for few seconds, like it was in my case. So the solution is to do this:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;press insert (ins) button&lt;/p&gt;&#xA;&#xA;&lt;p&gt;and add this line intel_idle.max_cstate=1 i915.enable_dc=0 i915.enable_fbc=0 i915.enable_psr=0 to the list of options inside &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot; &quot;. &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then save that file and execute sudo update-grub from terminal. Reboot and it should be fixed.&#xA;it should look like this after the change:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&quot;quiet splash intel_idle.max_cstate=1 i915.enable_dc=0 i915.enable_fbc=0 i915.enable_psr=0&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I additionally installed rng-tools and haveged as advised above:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install rng-tools&#xA;sudo apt install haveged&#xA;sudo systemctl enable haveged&#xA;sudo systemctl start haveged&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Seems this solved issue totally.&#xA;I am monitoring this with command:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo tail -f /var/log/syslog | grep 'Resetting'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There were errors like mentioned above, that is why I decided to compile the newest kernel. Solution provided in new post below or above.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-18T14:31:52.940" LastActivityDate="2020-05-18T14:31:52.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24606" PostTypeId="1" CreationDate="2020-05-18T06:45:01.510" Score="2" ViewCount="725" Body="&lt;p&gt;So, two or three days ago, i installed &lt;strong&gt;Elementary OS&lt;/strong&gt; and everything was going good, but when today i turned it on and i found there was no audio coming out, and found the message saying &quot;&lt;strong&gt;No Output Device Detected&lt;/strong&gt;&quot; in my Audio Settings and exactly the similar case for the input device.&lt;a href=&quot;https://i.stack.imgur.com/7zOz8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7zOz8.png&quot; alt=&quot;Screenshot&quot;&gt;&lt;/a&gt; &#xA;So,i was wondering what could possibly goes wrong all of sudden. Please Help Me!&#xA;Thanks in Advance!&lt;/p&gt;&#xA;" OwnerUserId="22937" LastEditorUserId="22937" LastEditDate="2020-05-18T06:52:40.587" LastActivityDate="2023-12-13T09:00:40.093" Title="No Output or Input Device Detected in Elementary OS" Tags="|audio|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24607" PostTypeId="2" ParentId="16296" CreationDate="2020-05-18T07:33:24.103" Score="0" Body="&lt;p&gt;You need to plug in an external USB WiFi adaptor in order to use WiFi in virtual box BTW is your computer is already connected to internet then you don't need to connect to WiFi in virtual box in order to use internet it will be connected by default.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyways if you need to use the inbuilt WiFi adaptor then you should either dual boot or run live USB&lt;/p&gt;&#xA;" OwnerUserId="22867" LastActivityDate="2020-05-18T07:33:24.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24608" PostTypeId="2" ParentId="24600" CreationDate="2020-05-18T08:05:24.933" Score="0" Body="&lt;p&gt;Could you check in your BIOS, if you have the option to set the graphics card mode?&#xA;There should be something like discrete and hybrid mode, if available. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;This should be set to hybrid mode. &lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-05-18T08:05:24.933" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24609" PostTypeId="1" CreationDate="2020-05-18T08:48:35.343" Score="0" ViewCount="413" Body="&lt;p&gt;I am quite new to elementary os and just wanted to know if there is a full screen app launcher available for elementary os(for Pantheon desktop environment) like just like the full screen start menu in windows or like app launcher in ubuntu and Kali Linux etc....&lt;/p&gt;&#xA;" OwnerUserId="22867" LastEditorUserId="22867" LastEditDate="2020-05-18T08:58:54.400" LastActivityDate="2020-05-18T09:38:17.987" Title="How to get full screen applications menu/app launcher for elemetary os 5.1 Hera?" Tags="|release-hera|themes|slingshot|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24610" PostTypeId="2" ParentId="24203" CreationDate="2020-05-18T09:33:33.530" Score="0" Body="&lt;p&gt;I do not know what happend on the first run, but for now the mouse started working, is showing battery state, all keys working. &lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-05-18T09:33:33.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24611" PostTypeId="2" ParentId="24609" CreationDate="2020-05-18T09:38:17.987" Score="1" Body="&lt;p&gt;this is not available. elementary simply handles this in another way and only with the Apps Launcher. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Greetings&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-05-18T09:38:17.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24612" PostTypeId="2" ParentId="24602" CreationDate="2020-05-18T10:06:53.293" Score="0" Body="&lt;p&gt;This happens also, when the application does not get removed completly. So you could check on the installed location and remove the rest of the data. This should end up where lutris / wine is installing applications. For me a test install ended up at /home//Games/&lt;/p&gt;&#xA;" OwnerUserId="22560" LastActivityDate="2020-05-18T10:06:53.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24615" PostTypeId="2" ParentId="16746" CreationDate="2020-05-18T12:17:11.327" Score="2" Body="&lt;p&gt;you can launch playonlinux into a terminal with :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exex=env GTK_CSD=0 /usr/share/playonlinux/playonlinux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;p&gt;you can change PlayOnLinux.desktop file : &lt;em&gt;/usr/share/applications/PlayOnLinux.desktop&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=playonlinux %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;by&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env GTK_CSD=0 playonlinux %F&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;If you don't know where is *.desktop file, use Menu Editor to find it and change it.&lt;/p&gt;&#xA;" OwnerUserId="22942" LastEditorUserId="16827" LastEditDate="2020-06-01T08:08:33.860" LastActivityDate="2020-06-01T08:08:33.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24616" PostTypeId="2" ParentId="17527" CreationDate="2020-05-18T14:21:21.970" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/GquQ7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GquQ7.jpg&quot; alt=&quot;No more error: Resetting rcs0 for hang on rcs0&quot;&gt;&lt;/a&gt;How to upgrade Elementary OS to the newest kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Only for braves. It may be unstable. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I installed it, because my i915 GPU Intel HD Graphics was freezing the way it drove me mad.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir /home/username/Downloads/kernel&#xA;mkdir /home/username/Downloads/amdgpu&#xA;mkdir /home/username/Downloads/i915&#xA;mkdir /home/username/Downloads/rtl&#xA;&#xA;#### to get rid of missing firmware errors for amdgpu ####&#xA;cd /home/username/Downloads/amdgpu&#xA;wget https://github.com/M-Bab/linux-kernel-amdgpu-binaries/files/4124959/firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;unzip firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;sudo dpkg -i firmware-radeon-ucode-rock_2.110_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or use eddy to install this deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My comment: I was brave enough.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#### to get rid of missing firmware errors for i915 ####&#xA;cd /home/username/Downloads/i915&#xA;git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git&#xA;sudo cp -R /linux-firmware/i915/* /lib/firmware/i915/&#xA;&#xA;#### to get rid of missing firmware errors for rtl (Realtek LAN and Wi-Fi adapters in my DELL) ####&#xA;cd /home/username/Downloads/rtl&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8168fp-3.fw&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8125a-3.fw&#xA;sudo cp rtl8168fp-3.fw /lib/firmware/rtl_nic &#xA;sudo cp rtl8125a-3.fw /lib/firmware/rtl_nic&#xA;&#xA;#### Download kernel 5.6.13 ####&#xA;cd /home/username/Downloads/kernel&#xA;wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.6.13.tar.xz&#xA;tar -xf linux-5.6.13.tar.xz&#xA;cd linux-5.6.13&#xA;&#xA;#### use 4 core/thread - if your processor have 4 cores ####&#xA;make -j 4&#xA;&#xA;#### use 8 core/thread - if your processor have 8 cores ####&#xA;make -j 8&#xA;&#xA;sudo make modules_install &#xA;sudo make install &#xA;sudo update-initramfs -c -k 5.6.13&#xA;&#xA;#### ignore these errors below, just because those two bin files are not made yet ####&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_ta.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu&#xA;&#xA;sudo update-grub&#xA;sudo reboot&#xA;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-05-18T14:58:25.007" LastActivityDate="2020-05-18T14:58:25.007" CommentCount="0" CommunityOwnedDate="2020-05-18T14:21:21.970" ContentLicense="CC BY-SA 4.0" />
  <row Id="24618" PostTypeId="2" ParentId="24339" CreationDate="2020-05-18T16:25:42.793" Score="0" Body="&lt;p&gt;Thats exactly what I experienced, too. I &lt;em&gt;can&lt;/em&gt; launch and use R via the Terminal (which feels a bit weird), but the icons/launchers for R and RStudio &lt;em&gt;exist&lt;/em&gt;, but simply won't do anything. Haven't tried R Commander yet.&#xA;Also tried downloading R itself via the AppCenter, but that doesn't change anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, as you may have already seen from the description above, I've also just a few weeks ago changed to elementary OS on my old Macbook Air from macOS High Sierra 10.13 - so I'm just a newbie getting used to how all that stuff works...&lt;/p&gt;&#xA;" OwnerUserId="22943" LastActivityDate="2020-05-18T16:25:42.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24622" PostTypeId="2" ParentId="24600" CreationDate="2020-05-18T22:35:06.420" Score="1" Body="&lt;p&gt;Ok, so I get to answer my own question. This is not an elementary OS issue, but rather a general Linux thing. Apparently, X likes to break inputs on upgrade.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To fix this, I just rebooted into recovery mode, enabled networking and dropped into &lt;code&gt;root&lt;/code&gt; and ran &lt;code&gt;apt-get install xserver-xorg-input-all&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Just like that, I'm back in business.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1033767/keyboard-not-working-after-update-to-18-04&quot;&gt;Original solution&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22933" LastActivityDate="2020-05-18T22:35:06.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24623" PostTypeId="1" CreationDate="2020-05-19T00:01:19.223" Score="0" ViewCount="89" Body="&lt;p&gt;Need to make an install disc, to install Elementary OS From DVD disc. Bios doesn't see usb stick as a bootable drive. Rufus only seems to make USB boot sticks.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Installing Elementary OS From DVD disc&lt;/p&gt;&#xA;" OwnerUserId="22948" LastActivityDate="2021-02-13T04:07:30.753" Title="Installing Elementary OS From DVD disc. Bios doesn't see usb stick as a bootable drive. Need to make an install disc, not an install stick" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24624" PostTypeId="1" CreationDate="2020-05-19T00:12:53.343" Score="0" ViewCount="94" Body="&lt;p&gt;Wingpanel on guest session disappears when clicked. It seems that the issue has something to do with apps installed through snap even though the target file has chmod 755 permission. Any clue on how to solve it?&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;** (wingpanel:26863): WARNING **: 20:41:27.288: AsyncImage.vala:384: Error opening file /snap/postman/108/usr/share/Postman/resources/app/assets/icon.png: Permission denied&#xA;&#xA;** Message: 20:41:27.299: DBusService.vala:64: Service registration suceeded&#xA;&#xA;** (wingpanel:26863): WARNING **: 20:41:27.445: desktop-file-service.vala:117: ubuntu is not understood&#xA;&#xA;** (wingpanel:26863): ERROR **: 20:41:27.566: worker-link.vala:83: Failed to create D-Bus server: Error binding to address: Permission denied&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="22896" LastActivityDate="2020-07-07T05:39:10.110" Title="Wingpanel guest session disappears" Tags="|wingpanel|camera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24625" PostTypeId="2" ParentId="24623" CreationDate="2020-05-19T03:13:03.843" Score="1" Body="&lt;p&gt;For a Windows 10 system, you can use the built-in image burner. Put a writable DVD into the DVD burner. Right-click the elementary OS image and select &lt;strong&gt;Burn disc image&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Side note: I also had a PC with a BIOS that did not allow booting from a USB. I downloaded PLOP boot manager, burned it to disc, booted from it, and was then able to access the the USB drive to boot from it.&#xA;&lt;a href=&quot;https://www.plop.at/en/bootmanager/download.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.plop.at/en/bootmanager/download.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-05-19T03:13:03.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24626" PostTypeId="1" CreationDate="2020-05-19T06:21:38.390" Score="0" ViewCount="94" Body="&lt;p&gt;It seems that similar questions are being buried for what ever reason.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to change the date format across the entire system (Files, Wingpanel, etc...) to a format of my own choice (YYYY.MM.DD hh:mm:ss). How do i do that?&lt;/p&gt;&#xA;" OwnerDisplayName="user22773" LastActivityDate="2020-05-19T16:15:38.560" Title="How to change the date format across the entire system" Tags="|wingpanel|pantheon-files|time|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24628" PostTypeId="2" ParentId="17527" CreationDate="2020-05-19T08:10:47.493" Score="0" Body="&lt;p&gt;Update May 19th 2020.&#xA;I did the sudo update-initramfs -c -k 5.3.0-51-generic&#xA;However tail -f /var/log/syslog | grep 'Resetting' still shows errors.&lt;a href=&quot;https://i.stack.imgur.com/cB3nh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cB3nh.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So the upgrade of the kernel is the only solution.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-19T08:10:47.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24630" PostTypeId="2" ParentId="16296" CreationDate="2020-05-19T15:02:23.490" Score="0" Body="&lt;p&gt;I did an install on my Lenovo 110 ideapad without any problems, though I had added an M.2 SSD drive and installed to that. I had previously installed to the internal HD without problem too.&lt;/p&gt;&#xA;" OwnerUserId="22557" LastActivityDate="2020-05-19T15:02:23.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24631" PostTypeId="2" ParentId="24626" CreationDate="2020-05-19T16:15:38.560" Score="1" Body="&lt;p&gt;I do not think it is possible to enforce one custom date-time format on every thing unfortunately.  If you search for &quot;format&quot; with dconf-editor you will find 8 or 9 different settings for different apps that control date and/or time format they use and most of those do not provide for an arbitrary custom format. For example for the wingpanel the time can be '12h', '24h' or 'ISO'.  In the 'Language and Region' plug in Switchboard you can use the &quot;Format&quot; selector to choose a set of pre-set formats suitable for different locales but no customization.  It is not part of elementary philosophy to cater for much customization, which may not please some users.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-05-19T16:15:38.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24632" PostTypeId="1" CreationDate="2020-05-19T21:36:22.237" Score="1" ViewCount="30" Body="&lt;p&gt;I mean, I know is Linux but as a user-friendly desktop it would be awesome&lt;/p&gt;&#xA;" OwnerUserId="22958" LastActivityDate="2020-05-19T21:36:22.237" Title="Could we see an system-wide autocorrect feature?" Tags="|keyboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24635" PostTypeId="2" ParentId="24297" CreationDate="2020-05-20T08:47:23.657" Score="0" Body="&lt;p&gt;I have more clues, this issue is happening when extended screen mode is in use, if you press Win+P or Cmd+P it changes to use external monitor only and everything starts to work fine, also in duplicated screen mode or only integrated screen mode. Only when extended screen mode is activated buttons of mouse are not responding. &lt;/p&gt;&#xA;" OwnerUserId="22966" LastActivityDate="2020-05-20T08:47:23.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24636" PostTypeId="1" CreationDate="2020-05-20T09:09:52.243" Score="1" ViewCount="229" Body="&lt;p&gt;I'm using Elementary OS on a mini-laptop where maximum resolution supported is 1024x600. There are some windows, like settings where some buttons are not visible because they are in the lower part of the window. Is there any way to zoom out the screen to see everything even loosing quality? &#xA;&lt;a href=&quot;https://i.stack.imgur.com/Kaq5J.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kaq5J.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22966" LastActivityDate="2024-03-02T22:07:21.020" Title="Windows are too big to see all buttons or toolbar when using low resolution screen" Tags="|settings|resolution|" AnswerCount="1" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24637" PostTypeId="1" CreationDate="2020-05-20T11:23:27.700" Score="0" ViewCount="69" Body="&lt;p&gt;I came across this the other day: &lt;a href=&quot;https://medium.com/@s0rata/gesture-setup-on-elementary-os-fce53997a50&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@s0rata/gesture-setup-on-elementary-os-fce53997a50&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have installed '&lt;em&gt;gestures&lt;/em&gt;' on my PC. But I cannot get the hang of adding new gesture commands to the app. How can I add mac like gestures?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0UvWP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0UvWP.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22852" LastActivityDate="2020-05-20T12:47:51.230" Title="mac like gestures in elementary OS" Tags="|release-hera|gesture|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24641" PostTypeId="2" ParentId="24182" CreationDate="2020-05-20T19:26:00.357" Score="1" Body="&lt;p&gt;I have the same problem. sudo wingpanel fixes this for the moment.&#xA;I always put the pc into standby and most of the time, there are two user sessions. &#xA;I just did some tests and could reproduce and &quot;fix&quot; it:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;start E OS&lt;/li&gt;&#xA;&lt;li&gt;login with user A&lt;/li&gt;&#xA;&lt;li&gt;at the power Menu choose user B&lt;/li&gt;&#xA;&lt;li&gt;login with user B&lt;/li&gt;&#xA;&lt;li&gt;at the power Menu choose user A&lt;/li&gt;&#xA;&lt;li&gt;login with User A&lt;/li&gt;&#xA;&lt;li&gt;at the power Menu try to choose User B (you can't choose it anymore)&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;at the power Menu, choose standby&#xA;Nothing happens an in the journal, there comes the stale file handle message&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;logout user A&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;at the login screen, standby or reboot also will not work&lt;/li&gt;&#xA;&lt;li&gt;enter Password for logged in User B&lt;/li&gt;&#xA;&lt;li&gt;at the power menu, choose standby&#xA;PC will go into standby&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;this is a very strange behaviour and i also don't have an idea, whats happening.   &lt;/p&gt;&#xA;" OwnerUserId="22970" LastEditorUserId="22970" LastEditDate="2020-05-20T19:36:07.883" LastActivityDate="2020-05-20T19:36:07.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24642" PostTypeId="1" CreationDate="2020-05-20T21:17:57.547" Score="0" ViewCount="218" Body="&lt;p&gt;(tldr: I want to reinstall elementaryOS fresh on the same partition, without damaging my Windows partition or messing up the ability to dual-boot. What do I do?)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've damaged my elementaryOS 5.1 Hera installation, by trying to solve a problem. (It still boots, but it's unusable; among other things, the mouse is frozen.) The details aren't important, since what I did didn't solve my original problem anyway. So rather than debugging,  it's simpler to wipe the elementaryOS partitions and reinstall from USB. (I have no data at risk in elementaryOS.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is an ASUS Zenbook and I have Windows 10 on another partition. When I turn on the machine, I get a Grub window with (elementary, elementary options, Windows Boot Manager) as my choices.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What is the process for reinstalling fresh? Do I simply (from within Windows) erase and reformat the three (as I recall) partitions used by elementary, then boot up from the install USB and install as usual (via the &quot;Something else&quot; option)? Or is there something else I have to do?&lt;/p&gt;&#xA;" OwnerUserId="22559" LastActivityDate="2024-01-31T05:08:56.103" Title="How to safely wipe and reinstall elementaryOS on dual-boot machine" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24645" PostTypeId="2" ParentId="24602" CreationDate="2020-05-20T23:55:30.733" Score="0" Body="&lt;p&gt;If it is a wine application, you can find the &quot;icon&quot; (*.desktop) file into your home folder in the location &lt;code&gt;~/.local/share/applications/wine/Programs&lt;/code&gt;. &lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open your files application&lt;/li&gt;&#xA;&lt;li&gt;Click on the home folder icon on the left&lt;/li&gt;&#xA;&lt;li&gt;click once inside the address bar on the right in order to see the text address selected, then click to the right of the selected text to deselect it&lt;/li&gt;&#xA;&lt;li&gt;Paste &lt;code&gt;/.local/share/applications/wine/Programs&lt;/code&gt; next to the home folder adress and hit enter.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;If it is not a wine application, the location should be &lt;code&gt;~/.local/share/applications/&lt;/code&gt; or &lt;code&gt;/usr/share/applications/&lt;/code&gt;, keep in mind that in order to manipulate the files into the second one you have to use &lt;strong&gt;New Window As Administrator&lt;/strong&gt; right click option to start the Files app.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-20T23:55:30.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24646" PostTypeId="2" ParentId="24642" CreationDate="2020-05-21T00:13:02.287" Score="0" Body="&lt;p&gt;You do not need to wipe out anything using Windows, in order to minimize the risk to destroy your partition tables I recommend you to not do it from there - Just use the install via Live USB using &lt;strong&gt;Something else&lt;/strong&gt; option and format the Elementary OS drive you do not want to keep before installing the os. &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-21T00:13:02.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24647" PostTypeId="1" CreationDate="2020-05-21T00:54:48.833" Score="2" ViewCount="194" Body="&lt;p&gt;I thought the idea of the &lt;strong&gt;AppCenter&lt;/strong&gt; was a great idea, until the first time I had to pay for something.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm not complaining about how much, or that you want a payment, but that I can't use my &lt;strong&gt;PayPal&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Like it or not... this is how the poor consumers of the world buy stuff.&#xA;I'm more than a little bent out of shape that you'll only take credit cards.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Please add more transaction options than just a credit card.&lt;/p&gt;&#xA;" OwnerUserId="22965" LastActivityDate="2021-09-27T15:02:30.227" Title="AppCenter needs to accept PayPal" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24649" PostTypeId="1" CreationDate="2020-05-21T07:57:56.643" Score="0" ViewCount="88" Body="&lt;p&gt;Newby to Linux and Elementary. Have tried Ubuntu. I find it very frustrating trying to install apps. Two in particular; Opera and Libre. They seem to do the install thing, but never appear in the installed apps. Great interface, but I suspect it's time to punt Elementary and move on.&lt;/p&gt;&#xA;" OwnerUserId="22974" LastActivityDate="2020-05-23T22:08:31.777" Title="Elementary seems restrictive" Tags="|apps|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24650" PostTypeId="2" ParentId="24297" CreationDate="2020-05-21T08:56:12.927" Score="0" Body="&lt;p&gt;It got even worse. I now cannot login anymore. If you try to click on the login button it jumps from the right to the left screen. If I use the keyboard to type the password and press enter it doesn’t login but show the same login screen again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I will probably delete the installation today and switch to Ubuntu. Quite unfortunate since for the time it worked I quite liked eOS&lt;/p&gt;&#xA;" OwnerUserId="22640" LastActivityDate="2020-05-21T08:56:12.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24651" PostTypeId="1" CreationDate="2020-05-21T13:44:13.393" Score="0" ViewCount="83" Body="&lt;p&gt;I can't shutdown my laptop running elementaryOS Hera 5.1.4. Whenever I try to shut it down the screen goes off,there is no sound but the power-indicator stays on until I switch it off using the power button.&#xA;I tried using 'sudo shutdown -h now' but the problem persists.&#xA;Also when I shut down from windows(dual-boot), it shuts down normally.&#xA; I am using Acer A315-42 with AMD Ryzen 3200U. &lt;/p&gt;&#xA;" OwnerUserId="22910" LastActivityDate="2020-05-24T16:27:02.753" Title="Problem in shutting down elementaryos" Tags="|dual-boot|laptop|shutdown|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24653" PostTypeId="2" ParentId="21615" CreationDate="2020-05-21T15:12:31.570" Score="0" Body="&lt;p&gt;removing hidden ubuntu partition allowed to install elementary. hopes it help. greetings&lt;/p&gt;&#xA;" OwnerUserId="22976" LastActivityDate="2020-05-21T15:12:31.570" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24656" PostTypeId="2" ParentId="22560" CreationDate="2020-05-22T08:18:52.687" Score="0" Body="&lt;p&gt;You can get it done by Komorebi, it allows you to set a webpage or a video as your wallpaper.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download the .deb file from :&#xA;&lt;a href=&quot;https://github.com/cheesecakeufo/komorebi/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/cheesecakeufo/komorebi/releases&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;install it using gdebi or the dpkg command from terminal&lt;/li&gt;&#xA;&lt;li&gt;search for wallpaper creator &#xA;there you can easily set the webpage as your wallpaper.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2018/07/animated-wallpaper-background-ubuntu-18-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2018/07/animated-wallpaper-background-ubuntu-18-04/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22910" LastEditorUserId="22910" LastEditDate="2020-05-22T08:26:11.920" LastActivityDate="2020-05-22T08:26:11.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24658" PostTypeId="1" CreationDate="2020-05-22T13:01:38.583" Score="0" ViewCount="293" Body="&lt;p&gt;I have an Asus Zenbook Flip S. I have been using it with Zorin OS for a while, until I discovered a bug which made the laptop unusable. Namely, the internal mic does not work, at all.&lt;br&gt;&#xA;I installed Windows, and after changing some setting the mic worked flawlessly, so I know it is not a hardware issue. I then tried booting live usbs of a bunch of distros, but none of the live sessions could use the mic, until elemantary OS 5.1. In the live session the mic just worked, with no needing to muck about with any settings at all, so I installed eOS. Imagine my frustration when after installation, the mic was again not working at all.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Symptoms:&lt;/strong&gt;&lt;br&gt;&#xA;When I go into sound settings and click input, sometimes the input level shows input for an instant but immediately drops to nothing. Other times it just shows nothing with shwoing for that instant.&lt;br&gt;&#xA;The mic naturally does not work. (tested by recording in whatsapp web and using an online mic checker, as well as seeing no bars in the settings screen.)&lt;br&gt;&#xA;There are 2 input devices, even when the computer is not connected to anything at all. One is listed as &quot;Internal Microphone - Built in audio&quot; and the other is listed as &quot;Headset Microphone - Built in audio&quot;. When I connect a bluetooth headset, a third option appears, &quot;Bluetooth headset&quot;, and this works perfectly.&lt;br&gt;&#xA;Regardless of which setting I pick, what volume it is at, and ensuring it is not muted, nothing gives me mic.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;STEPS I HAVE TAKEN:&lt;/strong&gt;&lt;br&gt;&#xA;I have tried installing pavucontrol, but no setting I tried there has any effect. Same with gnome-alsamixer.&lt;br&gt;&#xA;I don't really know what I'm doing in alsamixer, gnome-alsamixer, or pavucontrol, but I followed multiple suggestions from multiple questions on the web, but nothing has helped.    &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;SCREENSHOTS:&lt;/strong&gt;&lt;br&gt;&#xA;What I see when I enter settings:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cgDn2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cgDn2.png&quot; alt=&quot;What I see when I enter settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;pavucontrol:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oT2Ao.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oT2Ao.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Gmxs6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gmxs6.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;gnome-alsamixer (Default:)&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GxGOV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GxGOV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Settings aftter unmuting and raising volume in gnome-alsamixer:&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mz6xT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mz6xT.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;lasts for an instant and then drops to this:&lt;br&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/J3mDW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J3mDW.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;While the state is as shown in the last screenshot, the mic does not work.&lt;br&gt;&#xA;After switching between the two built in audio options, the &quot;headphone&quot; slider in gnome-alsamixer mutes itself again. This is the exact same behavior as I had in Zorin.&lt;br&gt;&#xA;I am truly at my wits' end here, I will not use Windows but I can't keep using a laptop with no mic.&#xA;Thanks.   &lt;/p&gt;&#xA;" OwnerUserId="22922" LastActivityDate="2024-02-03T22:07:51.033" Title="Can't get internal mic to work at all" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24659" PostTypeId="1" CreationDate="2020-05-22T15:30:26.787" Score="0" ViewCount="67" Body="&lt;p&gt;After Install OS , Mine Screen Resolution was struck on DEFAULT resolution &lt;/p&gt;&#xA;" OwnerUserId="22988" LastEditorUserId="8902" LastEditDate="2020-06-01T08:00:04.457" LastActivityDate="2020-06-01T08:00:04.457" Title="How Can I Change Screen Resolution ( Tried xrandr method )" Tags="|resolution|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24660" PostTypeId="2" ParentId="24649" CreationDate="2020-05-22T16:47:14.840" Score="1" Body="&lt;p&gt;I can confirm that both Opera and Libre install just fine. I can also confirm that some apps do not show their proper icon when first installed and the install was not made via the appcenter, however after you do a reboot you will see the proper icon in the application menu for your apps.&#xA;To install Opera I downloaded the .deb file from their website and used eddy to install it. Checked the application menu and the app was there without an icon but worked just fine.&#xA;Libre is an easier install as you just have to install from the appcenter and it will automatically appear in the application menu.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope that helps. Best of luck.&lt;/p&gt;&#xA;" OwnerUserId="20115" LastActivityDate="2020-05-22T16:47:14.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24661" PostTypeId="1" CreationDate="2020-05-22T16:53:06.643" Score="0" ViewCount="28" Body="&lt;p&gt;thank you for the chance to post my problem.&#xA;I am trying to update and receive the following&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://ppa.launchpad.net/bumblebee/stable/ubuntu bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22990" LastEditorUserId="16827" LastEditDate="2020-06-01T08:10:35.667" LastActivityDate="2020-06-01T08:10:35.667" Title="update problem due to the repository" Tags="|updates|" AnswerCount="0" CommentCount="3" ClosedDate="2020-06-01T08:12:09.890" ContentLicense="CC BY-SA 4.0" />
  <row Id="24662" PostTypeId="1" CreationDate="2020-05-22T19:13:12.703" Score="0" ViewCount="147" Body="&lt;p&gt;I've been using and enjoying eOS on a 2007 MacBook for about a month now, but as the fans often run at full speed for simply having a single HTML5 YouTube tab open in Firefox, I found myself scouring the web last night in search of potential optimisation solutions. I installed what I thought to be a missing proprietary graphics driver from Intel (as well as the colour profile from another Mac, but that's definitely unrelated), but upon an eventual restart my trackpad and keyboard suddenly stopped working. Everything loads as normal and the system is responsive - I'm even able to enter my encryption password with the keyboard -, but no amount of interaction with the keyboard or mouse gets me anywhere once eOS is fully active.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;In such a situation, my first instinct is to boot into some sort of recovery or safe mode to troubleshoot, but all that gets me is GRUB, which as a novice is completely bewildering, with nothing more than &quot;grub&gt;&quot; being displayed. I've no prior experience with this, so I enter &quot;help&quot; and get a bunch of commands I don't understand, and even my computer-engineer dad is stumped. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know I want to boot to a recovery mode, but I've found no easy guide online and have no idea how to get there from here, so... Where do I go from here?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="22992" LastActivityDate="2024-03-16T20:05:25.630" Title="Trackpad and keyboard suddenly not working on MacBook 3,1" Tags="|keyboard|touchpad|macbook|graphics|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24663" PostTypeId="2" ParentId="24647" CreationDate="2020-05-22T20:27:42.597" Score="1" Body="&lt;p&gt;I am afraid this is not the place for such a proposal - stackexchange is a question and answer comunity where people can share experience how the things work or not. If you want to ask for such a payment option, the official way to do it is to add an issue into &lt;a href=&quot;https://github.com/elementary/appcenter/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-05-22T20:27:42.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24669" PostTypeId="1" CreationDate="2020-05-23T03:09:09.467" Score="2" ViewCount="376" Body="&lt;p&gt;I recently installed virt-manager. It created a user – Libvirt Qemu (libvirt-qemu) – and that user shows on the Welcome Screen. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't want that user to show up on the Welcome Screen. How can I hide it? &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've already tried the following:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Added &quot;libvirt-qemu&quot; to the &quot;hidden-users=&quot; line in /etc/lightdm/users.conf&lt;/li&gt;&#xA;&lt;li&gt;Created /var/lib/AccountsService/users/libvirt-qemu with&lt;br&gt;&#xA;&lt;code&gt;[User]&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;SystemAccount=true&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lZopy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lZopy.png&quot; alt=&quot;User Accounts Screenshot&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas? &lt;/p&gt;&#xA;" OwnerUserId="22539" LastActivityDate="2024-03-05T03:07:20.840" Title="How can I hide a user from the Welcome Screen?" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24671" PostTypeId="1" CreationDate="2020-05-23T12:27:17.487" Score="0" ViewCount="213" Body="&lt;p&gt;elementary OS 5.1.4 Hera&#xA;Dual-Core Intel® Core™ i7-3537U CPU @ 2.00GHz&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is what happened:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;1-After using Inkscape for a while, the image thumbnails disapeared from my system folders.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2-Following an advise, I cleared the cache in $HOME/.cache/thumbnails and $HOME/.thumbnails, using sudo rm -rf *, as per thread: &#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2390636&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2390636&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;3-Reeboted and the Files app shortcuts to Images, Documents, etc were gone.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;4-Navigating to my Home folder and my user with the Files app, there were no thumbnails for any file, the folders all look empty. But hovering shows they have the normal size. On an external drive all is fine, and I got thumbnails back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;5-I restored the settings and reebooted, but the problem remains the same. And my keyboard now also is the wrong one, even though I chose the correct language and region PT, and reebooted yet again.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;6-Also, I reinstalled Pantheon using the App Store, and reeboted and the issue remains. Finally, I launched Pantheon with sudo, and it-s exactely the same problem.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So please, I would really apreciate if someone coul help me:&#xA;- Get back to normal navigation, in my File System&#xA;- If possible, also choose the correct keyboard&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance for your time.&lt;/p&gt;&#xA;" OwnerUserId="3103" LastEditorUserId="3103" LastEditDate="2020-05-23T12:32:22.513" LastActivityDate="2024-02-02T21:08:56.173" Title="How can I restore the Files app to original settings?" Tags="|settings|pantheon-files|files|default|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24672" PostTypeId="2" ParentId="12072" CreationDate="2020-05-23T16:53:24.950" Score="-1" Body="&lt;p&gt;I'm new to Linux so when I finally got EOS installed I was pumped. I love the look and feel of MacOSx b/c I use but dislike Windows. And I was hoping this would work b/c I am trying to move whole house to Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ended up installing another Linux distro over EOS unfortunately because of the lack of intuitiveness and ease of installing not just the printer but a couple other apps. &lt;/p&gt;&#xA;" OwnerUserId="22998" LastActivityDate="2020-05-23T16:53:24.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24673" PostTypeId="2" ParentId="24671" CreationDate="2020-05-23T17:20:00.870" Score="0" Body="&lt;p&gt;To restore Files original settings you can run &lt;code&gt;sudo apt purge pantheon-files&lt;/code&gt; to remove most of the Files configuration files. It will not remove those in your home directory that were created by running the program such as your bookmarks or color tag database but you probably want to keep those. Then reinstall it with &lt;code&gt;sudo apt install pantheon-files&lt;/code&gt; (after doing &lt;code&gt;sudo apt update&lt;/code&gt; to make sure you get the latest released version).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I fear from your description that you have deleted a lot of unrelated files as well which cannot simply be restored unless you have a backup of your home folder.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To restore the whole system default settings open Switchboard and navigate to the &quot;About&quot; plug.  There is a button &quot;Restore Default Settings&quot;. Again, this may not work if important files have been deleted.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastEditorUserId="3911" LastEditDate="2020-05-23T17:50:59.323" LastActivityDate="2020-05-23T17:50:59.323" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24678" PostTypeId="2" ParentId="24658" CreationDate="2020-05-24T09:00:26.277" Score="0" Body="&lt;p&gt;After isolating the issue of it working under live usb, I finally realized that it must be the kernel. I installed an old 4.19 kernel and booted into that, and it works perfectly now.&lt;/p&gt;&#xA;" OwnerUserId="22922" LastActivityDate="2020-05-24T09:00:26.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24679" PostTypeId="1" CreationDate="2020-05-24T09:19:29.823" Score="0" ViewCount="58" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WWlgN.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WWlgN.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am trying to install elementary OS in my windows 10 laptop but all I am seeing is that screen for about an hour.&lt;/p&gt;&#xA;" OwnerUserId="23004" LastActivityDate="2020-06-24T07:00:30.103" Title="Elementary OS installation" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24684" PostTypeId="1" CreationDate="2020-05-24T18:46:01.003" Score="0" ViewCount="169" Body="&lt;p&gt;Intente instalar Spotify en mi laptop, sin exito, ahora resivo un anuncio muy molesto cada vez que abro mi centro de aplicaciones (adjunto imag&lt;a href=&quot;https://i.stack.imgur.com/QLydV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QLydV.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;en)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Doy clic en detalles y obtengo lo siguiente:&#xA;W: Error de GPG: &lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4773BD5E130D1D45&#xA;E: El repositorio «&lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease» no está firmado.&#xA;W: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;W: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: &lt;a href=&quot;http://repository.spotify.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://repository.spotify.com&lt;/a&gt; stable InRelease is not (yet) available (The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4773BD5E130D1D45)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Por favor su apoyo para que no me salga este mensaje de error cada vez que entro al centro de apliaciones.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Apoyo para instalar spotify. mi sistema es elementary OS 5.1.4 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Gracias&lt;/p&gt;&#xA;" OwnerUserId="23008" LastActivityDate="2023-12-11T21:02:30.320" Title="Problemas al Instalar Spotify" Tags="|system-installation|appcenter|resolution|install|spotify|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24687" PostTypeId="2" ParentId="24552" CreationDate="2020-05-25T02:13:15.310" Score="0" Body="&lt;p&gt;I found the problem arising from incomplete icon theme ePapirus. I would advise against using it as of May 2020. &lt;/p&gt;&#xA;" OwnerUserId="22880" LastActivityDate="2020-05-25T02:13:15.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24688" PostTypeId="2" ParentId="24679" CreationDate="2020-05-25T06:14:06.803" Score="1" Body="&lt;p&gt;Which tutorial did you use to install Elementary OS in dual boot with Windows? Very important information is to describe step by step all actions you performed. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-25T06:14:06.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24690" PostTypeId="2" ParentId="24662" CreationDate="2020-05-25T09:57:00.087" Score="0" Body="&lt;p&gt;I have a 2007 MacBook3,1 myself. I’m afraid you’re probably expecting too much from a machine that Apple decided was obsolete way back in 2012 when macOS 10.8 Mountain Lion came out. It was stuck on 10.7 Lion and getting pretty useless as far as current web browser support. It’s kind of a miracle that it still works as well as it does. It only has the basic Intel integrated graphics so it’s unlikely we can get more performance by looking for different drivers. Try watching YouTube at a lower bitrate instead, like 480p or even 360p. It doesn’t really make that much noticeable difference with most video content but it will drastically decrease the work the GPU has to do. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;That being said, are you aware that you can upgrade the MacBook3,1 all the way to 10.11 El Capitan? It actually works surprisingly well. But I don’t think it works any better with heavy video content than eOS does. Probably even worse actually, because full graphics acceleration isn’t working yet in the patched El Cap. The installer patcher is at &lt;a href=&quot;https://github.com/rmc-team/osx-patcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rmc-team/osx-patcher&lt;/a&gt; in case you want to check it out. It’s at least a lot more useful with El Cap than with Lion, and its fun to dual boot El Cap with eOS to compare them on the same hardware. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Also if you are missing the Mac-style keyboard shortcuts in eOS try to look up a new project called Kinto. You’ll find it by googling rbreaves-kinto. It’s not perfect but it’s progressing well. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;With my still limited knowledge of Linux here is what I would try to fix your problem. Let the desktop start up, then try to access another tty “console” using the function keys. How you do this seems to vary a bit between distros, but usually it’s either Ctrl+Alt+F1 (or F2, F4, F4, up to F7) or just Alt+F1. Since you’re on a MacBook, you will probably need to use the “Fn” function key to actually activate the function keys. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If this works you get a black screen with a text login prompt, where you can log in and try to troubleshoot. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you can’t get to another console because the keyboard is truly unresponsive, you’ll have to boot from some kind of live Linux media like the USB stick you may have used to install eOS in the first place. Of course then you’d have to figure out how to mount your encrypted drive partition. It shouldn’t be too difficult but I’ve never done it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you did get to another text console you can do a couple of different things. One is you can try to uninstall the package that installed the Intel driver you thought you needed. If you can’t recall the exact package name you can try “sudo apt search packagename” (use some relevant word like “intel” instead of “packagename” obviously) and then when you find it you can try “sudo apt remove packagename”. Then if it’s successfully removed, do “sudo reboot”. See if the desktop comes back after the reboot and the keyboard and mouse work again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that didn’t get the keyboard back, the next thing I would try is removing the configuration file that tells the graphical interface what driver to use. Using the same procedure from above to get to a text console, type this: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.broken &lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;This just renames the xorg.conf file to xorg.conf.broken. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If for some reason you ever want to put it back, just reverse the file names or make a copy like this: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo cp /etc/X11/xorg.conf.broken /etc/X11/xorg.conf&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;But don’t do that right now. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;The current Xorg server can supposedly auto-configure itself in the event that there is no xorg.conf file found. To see if removing the xorg.conf file will let it fix itself, do “sudo reboot” again. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that still didn’t work, you will need more expert help than I can provide, or you may need to try reinstalling eOS. That should be possible without destroying your data, as long as you can manage to mount your encrypted drive. But again, I’ve never really done that. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Another possible solution, after uninstalling the extra Intel package and removing xorg.conf, is running “X -configure”. I’ve tried that on other machines and Linux distros without much luck, but maybe it will build a new working xorg.conf for you. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Good luck. &lt;/p&gt;&#xA;" OwnerUserId="22951" LastEditorUserId="22951" LastEditDate="2020-05-26T10:46:53.110" LastActivityDate="2020-05-26T10:46:53.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24693" PostTypeId="1" CreationDate="2020-05-25T16:25:32.647" Score="0" ViewCount="132" Body="&lt;p&gt;I have now started using ElementaryOS daily.  Everything is going very well.  I do have two things I need to figure out.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;1st. This one is a must have.  I need to have thumbnails when I browse a networked drive.  I deal with image files a lot during my work day.  These are usually named something like WO65280.jpg.  I use thumbnail view so that it is easy for me to find what I am looking for.  I know it's possible.  I have seen it in other distros. I just don't know how to turn it on in Elementary OS.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;2nd. A would like to have.  Folder views in Elementary OS are a one size fits all.  Setup your pictures folder the way you like and all other folders Music, Videos all will get the same settings.  It would be nice for each folder to be able to have it's own view settings.  Again I know it's possible.  Other distros do this.  Is this not possible in ElementaryOS?  Is it something coming soon?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Everything else I have needed to do in Elementary has worked.  Has been easy to discover and setup.  Overall I am really able to get my daily work done using Elementary.  Overall much better than other distros I have tired.  The thumbnail view on network drives is a must have though.  The one file view fits all is rather annoying and somewhat a mystery to me as to why Elementary OS would do that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks for the help.&lt;/p&gt;&#xA;" OwnerUserId="3632" LastActivityDate="2024-02-06T00:08:31.190" Title="Networks Drive - Thumbnails" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24699" PostTypeId="1" CreationDate="2020-05-26T10:26:35.433" Score="0" ViewCount="62" Body="&lt;p&gt;Please bear with me because I do not know what is causing this issue or how to reproduce it. I wrote randomly in the title because I am not sure if there is something I am doing (e.g. some unfortunate combination of key strokes) that causes this behavior.&lt;/p&gt;&#xA;&lt;p&gt;Sometimes while using my computer, the desktop will start behaving strangely. That is, the left mouse button will stop working. It will still work to select different windows that are open, but I will not be able to click on anything within those windows, I won't be able to close those windows, and I cannot select from the menu to shutdown the computer.&lt;/p&gt;&#xA;&lt;p&gt;The keys will somehow also become re-mapped. For example, pressing &amp;quot;o&amp;quot; will toggle screen rotation lock, pressing &amp;quot;w&amp;quot; or the down arrow key will toggle Multitasking View, and pressing &amp;quot;1&amp;quot; and &amp;quot;2&amp;quot; will switch between work spaces. If I am in a terminal window and press &amp;quot;t&amp;quot;, it will open a new terminal window. While in a terminal, I will not be able to type anything.&lt;/p&gt;&#xA;&lt;p&gt;As I said, I have no idea how to reproduce this behavior, it seems to happen randomly and when it does happen I have no other option but to do a hard shut down. I do not know what kind of information people may need to diagnose and solve the problem, so I will be happy to try and respond to any questions. I am definitely not an expert Linux user, or someone who is very computer savvy. Further information:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;OS:  elementary OS 5.1.4 Hera x86_64&lt;/p&gt;&#xA;&lt;p&gt;Host: 80V4 Lenovo YOGA 710-14IKB&lt;/p&gt;&#xA;&lt;p&gt;Kernel: 4.15.0-101-generic&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Thank you in advance for any guidance or help.&lt;/p&gt;&#xA;" OwnerUserId="20930" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2024-01-09T21:08:15.973" Title="Strange desktop behavior seems to &quot;randomly&quot; occur" Tags="|release-hera|keyboard-shortcuts|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24701" PostTypeId="2" ParentId="24693" CreationDate="2020-05-26T16:17:47.747" Score="0" Body="&lt;p&gt;You should be able to show remote thumbnails by right-clicking on the background of the view and choosing &quot;Show Remote Thumbnails&quot;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;By &quot;one size fits all&quot; I assume you mean the zoom level, i.e. the icon size? It is true that there is only one zoom level setting for each of the three view modes. This is true also of other Gtk based file managers (in Bionic) such as the archetypal Nautilus.  It is possible that Windows, MacOS or KDE might implement zoom per tab? This is in the process of being implemented for Terminal so could be implemented for Files also.  It would be more difficult (but possible) to implement zoom setting per folder.  Please raise an issue on &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; so the extent of support can be gauged.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-05-26T16:17:47.747" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24703" PostTypeId="1" CreationDate="2020-05-26T20:02:44.120" Score="0" ViewCount="323" Body="&lt;p&gt;I am trying to revive an older MBP (mid 2009) with elementaryOS. One of the things that I noticed is that the trackpad by default is pretty limited after the installation. I figured that I need to inst&lt;/p&gt;&#xA;" OwnerUserId="189" LastEditorUserId="189" LastEditDate="2020-05-26T20:15:13.023" LastActivityDate="2024-02-07T04:09:36.143" Title="How to get trackpad gestures (three finger drag, four finger expose, etc.) functionality in elementaryOS installed on macbook pro 2009" Tags="|touchpad|macbook|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24706" PostTypeId="2" ParentId="22775" CreationDate="2020-05-27T09:33:39.620" Score="0" Body="&lt;p&gt;I solved it by doing&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt-get software-properties-common&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo add-apt-repository ppa:canonical-hwe-team/backport-iwlwifi&#xA;sudo apt-get update&#xA;sudo apt-get install backport-iwlwifi-dkms&lt;/p&gt;&#xA;&#xA;&lt;p&gt;sudo apt install linux-generic-hwe-18.04-edge&lt;/p&gt;&#xA;&#xA;&lt;p&gt;my wifi card is Intel Wireless AC-9560 - I came across this on another &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21683/wireless-driver-installation/21685#21685&quot;&gt;post&lt;/a&gt; &lt;/p&gt;&#xA;" OwnerUserId="19666" LastActivityDate="2020-05-27T09:33:39.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24708" PostTypeId="1" CreationDate="2020-05-27T14:47:21.390" Score="1" ViewCount="102" Body="&lt;p&gt;I am using elementary OS 5.1.4 Hera&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I want to use two audio output devices simultaneously. They are different physical cards. one is a usb dac and one is the built in line-out&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i select simultaneous output devices in paprefs (&lt;a href=&quot;https://askubuntu.com/questions/78174/play-sound-through-two-or-more-outputs-devices&quot;&gt;https://askubuntu.com/questions/78174/play-sound-through-two-or-more-outputs-devices&lt;/a&gt;) sound settings crashes every time i open it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound settings pops up for a second then vanishes. Sound still works but through the previously selected output. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To test, i loaded Ubuntu 20.x onto a small partition and followed the same paprefs process and it worked fine - i was able to select the simultaneous virtual device in Ubuntu sound settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Do i have to manually configure an audio sink and point the os at it via pulseaudio terminal commands? Is this possible?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your help here&lt;/p&gt;&#xA;" OwnerUserId="23038" LastActivityDate="2020-05-27T14:47:21.390" Title="Sound Settings Crashes after setting up Simultaneous Output with paprefs" Tags="|settings|sound|audio|crash|bugs|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24710" PostTypeId="2" ParentId="11687" CreationDate="2020-05-27T16:29:56.597" Score="0" Body="&lt;p&gt;The same thing has happened to me, after using the screenshot tool.&#xA;Even though I could solve using the command line, for an average user that could be a terrifying idea. &lt;/p&gt;&#xA;" OwnerUserId="23040" LastActivityDate="2020-05-27T16:29:56.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24711" PostTypeId="1" AcceptedAnswerId="24712" CreationDate="2020-05-27T18:05:15.367" Score="1" ViewCount="448" Body="&lt;p&gt;I don't know how I messed this up, probably with a bad aptitude configuration (my bad), but the &quot;Keyboard&quot; configuration item is missing from System Settings:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0pmqO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0pmqO.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What package should I reinstall to have the keyboard settings back in system settings?&lt;/p&gt;&#xA;" OwnerUserId="9692" LastActivityDate="2020-05-27T18:10:10.637" Title="Keyboard configuration missing from System settings" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24712" PostTypeId="2" ParentId="24711" CreationDate="2020-05-27T18:10:10.637" Score="2" Body="&lt;p&gt;Reinstalling the packages &lt;code&gt;switchboard-plug-keyboard&lt;/code&gt; and &lt;code&gt;wingpanel-indicator-keyboard&lt;/code&gt; fixed the issue. Thanks for the person that helped me on IRC.&lt;/p&gt;&#xA;" OwnerUserId="9692" LastActivityDate="2020-05-27T18:10:10.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24713" PostTypeId="2" ParentId="24703" CreationDate="2020-05-27T22:47:32.983" Score="0" Body="&lt;p&gt;Gestures doesn't function without proper program and configuration. &#xA;You can Install Fusuma. My Macbookpro2008 got it working.&#xA;&lt;a href=&quot;https://github.com/iberianpig/fusuma&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/iberianpig/fusuma&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2020-05-27T22:47:32.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24717" PostTypeId="2" ParentId="24198" CreationDate="2020-05-28T04:10:44.597" Score="1" Body="&lt;p&gt;Solution&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same issue and i tried the following things.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Downloading the iso again&lt;/li&gt;&#xA;&lt;li&gt;Did hash check and found it's ok&lt;/li&gt;&#xA;&lt;li&gt;Recreate the USB using Unetbootin, then Startup disk creator&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But none of the above worked. &#xA;Finaly what worked was, &lt;strong&gt;i wrote the image to a DVD using Brasero and tried. It worked like charm.&lt;/strong&gt; &lt;/p&gt;&#xA;" OwnerUserId="22999" LastActivityDate="2020-05-28T04:10:44.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24718" PostTypeId="2" ParentId="17292" CreationDate="2020-05-28T04:13:49.887" Score="0" Body="&lt;p&gt;&lt;strong&gt;Solution&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had the same issue with Elementary 5.1(Hera) and tried the following things.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Downloading the iso again&lt;/li&gt;&#xA;&lt;li&gt;Did hash check and found it's ok&lt;/li&gt;&#xA;&lt;li&gt;Recreate the USB using Unetbootin, then Startup disk creator&lt;/li&gt;&#xA;&lt;li&gt;ubiquity --no-migration-assistant&lt;/li&gt;&#xA;&lt;li&gt;Restructuring partitions&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;But none of the above worked. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Finaly what worked was, i wrote the image to a DVD using Brasero and tried. It worked like charm.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22999" LastActivityDate="2020-05-28T04:13:49.887" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24719" PostTypeId="2" ParentId="21634" CreationDate="2020-05-28T04:19:19.757" Score="0" Body="&lt;p&gt;&lt;strong&gt;Solution&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I had the same issue with Elementary 5.1(Hera) and tried the following things.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Downloading the iso again&lt;/li&gt;&#xA;&lt;li&gt;Did hash check and found it's ok&lt;/li&gt;&#xA;&lt;li&gt;Recreate the USB using Unetbootin, then Startup disk creator&lt;/li&gt;&#xA;&lt;li&gt;ubiquity --no-migration-assistant&lt;/li&gt;&#xA;&lt;li&gt;Restructuring partitions&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;But none of the above worked.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Finaly what worked was, i wrote the image to a DVD using Brasero and tried. It worked like charm.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I know it's wierd, but that simply worked. I have read this solution in other forums too.&lt;/p&gt;&#xA;" OwnerUserId="22999" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-05-28T04:19:19.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24721" PostTypeId="1" CreationDate="2020-05-28T05:52:42.990" Score="0" ViewCount="89" Body="&lt;p&gt;I am concerned and really disappointed because battery consumption is much more higher than Windows 10 and heat from processor area is worrying and disturbing, same usage, web browsing.&#xA;Elementary OS &quot;Hera&quot; @celeron N4000&lt;/p&gt;&#xA;" OwnerUserId="23047" LastEditorUserId="15904" LastEditDate="2020-05-29T05:13:45.207" LastActivityDate="2020-12-20T22:13:57.917" Title="Is it possible to improve Battery life &amp; Overheat?" Tags="|release-hera|battery|overheat|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24722" PostTypeId="2" ParentId="24684" CreationDate="2020-05-28T09:49:46.510" Score="0" Body="&lt;p&gt;Remove Spotify sudo apt remove --purge spotify&#xA;Then install Spotify using a flatpak. There are plenty tutorials in the Google how to do this via flatpak. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-28T09:49:46.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24724" PostTypeId="1" CreationDate="2020-05-28T14:17:50.453" Score="1" ViewCount="188" Body="&lt;p&gt;I'm 05 days trying to decrease and increase the brightness of my keyboard through the Fn + F9 -&gt; Decrease and Fn + F10 -&gt; Increase keys and I can't. I've tried everything but it doesn't work. As I have already adjusted the whole system and I am afraid of giving a problem, I am avoiding moving too much.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My Notebook model is the Samsung series 9 np900x3c. The version of my Elementary OS is the current version on the site right now.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The help answers I found on the site refer to adjusting the brightness of the screen, but that is not my case. I need to correct the keyboard brightness using the Fn - F9 / F10 keys.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I press them, the animation of increasing and decreasing brightness appears on the screen, but this does not happen in practice. When I press Fn - F2 / F3 to adjust the brightness of the screen, it works normal.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I thank the attention.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="23051" LastEditorUserId="23051" LastEditDate="2020-05-29T01:37:59.930" LastActivityDate="2024-02-19T02:06:25.843" Title="Problem when triggering the Keyboard brightness with (Fn + F9) and (Fn + F10)" Tags="|settings|keyboard-shortcuts|keyboard|drivers|brightness|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24725" PostTypeId="1" CreationDate="2020-05-28T16:40:06.720" Score="1" ViewCount="1113" Body="&lt;p&gt;I am using elementary os 5.1.4 Hera version, In that, I am not getting the wireless network to forget option. In the previous version of elementary os wireless network forget option is there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is a bug... Please resolve this on high priority...&lt;/p&gt;&#xA;" OwnerUserId="23053" LastActivityDate="2020-05-29T08:04:09.387" Title="How can I remove wireless network, Which is already stored in the system" Tags="|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24727" PostTypeId="2" ParentId="24699" CreationDate="2020-05-28T19:10:02.340" Score="0" Body="&lt;p&gt;I would start by trying to update the kernel with a more recent one, if you don't have any specific reason to stay on 4.15.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Latest is 5.3.0-53-generic.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To get there:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;From now on, you will receive in AppCenter the new kernel updates.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-05-28T19:10:02.340" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24728" PostTypeId="1" CreationDate="2020-05-28T22:59:22.627" Score="0" ViewCount="69" Body="&lt;p&gt;When I press the shutdown button, it is as if it turned off, no lights or anything come on, but when I press a key even if it is off, the PC turns on again.&lt;/p&gt;&#xA;" OwnerUserId="23056" LastActivityDate="2024-02-08T15:03:20.450" Title="Elementary OS does not shutdown completely" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24729" PostTypeId="2" ParentId="19162" CreationDate="2020-05-29T03:55:01.337" Score="0" Body="&lt;p&gt;&quot;Desktop Folder&quot; is in the AppCentre and it allows access to the desktop as I wanted, and is usual l with other distros.&lt;/p&gt;&#xA;" OwnerUserId="23058" LastActivityDate="2020-05-29T03:55:01.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24730" PostTypeId="2" ParentId="24721" CreationDate="2020-05-29T07:57:12.670" Score="-1" Body="&lt;p&gt;You can install TLP to improve it. You will find an answer in Google how to install it in Ubuntu. Because Elementary OS is based on Ubuntu repo, you can install the software identical way in Elementary OS like in Ubuntu.&lt;/p&gt;&#xA;&lt;p&gt;Do not minus answer, just because I wrote the truth above. Anyway solution which I have provided earlier is here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24223/indicators-on-wingpanel/24233?noredirect=1#comment25535_24233&quot;&gt;how to install TLP and TLPUI&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So all what was necessary -&amp;gt; to use search here in Stack Exchange.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="8517" LastEditDate="2020-12-20T22:13:57.917" LastActivityDate="2020-12-20T22:13:57.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24731" PostTypeId="2" ParentId="24724" CreationDate="2020-05-29T08:00:59.813" Score="0" Body="&lt;p&gt;Press Fn and Esc once and try to use it. Fn+Esc is a switcher which allows to use functionality. However it may be related to the hardware rather. I have no idea how to remap it, just because I am not a developer. It seems that part of the code responsible for proper working of these buttons is not properly recognizing your keyboard layout. Hard to say anything more about this. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-29T08:00:59.813" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24732" PostTypeId="2" ParentId="24728" CreationDate="2020-05-29T08:02:21.453" Score="0" Body="&lt;p&gt;You have wrongly set the power button in power management. And instead of poweroff it hibernates the machine. Change it please. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-29T08:02:21.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24733" PostTypeId="2" ParentId="24725" CreationDate="2020-05-29T08:04:09.387" Score="8" Body="&lt;p&gt;Use terminal and type sudo nmtui. There you will ne able to delete it.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-29T08:04:09.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24734" PostTypeId="2" ParentId="24303" CreationDate="2020-05-29T08:05:21.997" Score="0" Body="&lt;p&gt;Themes are responsible for this in Elementary OS. So you must edit a theme in /usr/share/themes.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-05-29T08:05:21.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24735" PostTypeId="1" CreationDate="2020-05-29T11:30:46.467" Score="0" ViewCount="27" Body="&lt;p&gt;Recently I ran into a black screen issue while setting up &lt;a href=&quot;https://polychromatic.app/&quot; rel=&quot;nofollow noreferrer&quot;&gt;polychromatic&lt;/a&gt;. There was a small note on the page that said: &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;  &lt;p&gt;*Desktop environment needs to support AppIndicator. Some distributions&#xA;  (such as elementaryOS) require additional steps.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;Once I installed the program by following the guide &lt;a href=&quot;https://polychromatic.app/download/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, I was met with a black screen.&lt;/p&gt;&#xA;" OwnerUserId="20612" LastActivityDate="2024-02-08T20:07:25.857" Title="How to solve black screen issue on polychromatic" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24736" PostTypeId="2" ParentId="24735" CreationDate="2020-05-29T11:30:46.467" Score="0" Body="&lt;p&gt;You need to install GNOME AppIndicator by following the guide &lt;a href=&quot;https://www.addictivetips.com/ubuntu-linux-tips/re-enable-app-indicators-on-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20612" LastActivityDate="2020-05-29T11:30:46.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24737" PostTypeId="2" ParentId="24430" CreationDate="2020-05-29T15:49:46.233" Score="0" Body="&lt;p&gt;I tried to avoid this, but after installing new nvidia-340 driver the &quot;shutdown&quot;-button in the menu works.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;driver version: nvidia-340 340.108&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now, I have a little problem the screen resolution in the login screen is not correct (or sometimes the wallpaper). But I think this is to fix soon. ;)&lt;/p&gt;&#xA;" OwnerUserId="21156" LastActivityDate="2020-05-29T15:49:46.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24738" PostTypeId="2" ParentId="24178" CreationDate="2020-05-29T19:30:11.407" Score="1" Body="&lt;p&gt;You Can change two ways:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;System-wide by editing &lt;code&gt;gtk-dark.css&lt;/code&gt; only.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Or only changing color palette for &lt;code&gt;terminal&lt;/code&gt; only by editing below file:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;/usr/share/glib-2.0/schemas/io.elementary.terminal.gschema.xml&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Here is the results either way&#xA; &lt;a href=&quot;https://i.stack.imgur.com/12751.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/12751.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-05-29T19:30:11.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24739" PostTypeId="1" AcceptedAnswerId="24916" CreationDate="2020-05-29T20:47:32.397" Score="0" ViewCount="246" Body="&lt;p&gt;Edit : For clarification, the issue is EOS not shutting down (both restart and shut down stay hanging with a black screen and no possible interaction). Following is the original question with the hardware details :&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have EOS installed on a huawei matebook D (Ryzen 2500U CPU, no graphics card), the OS is up to date. I have noticed the battery drains to zero in a day or so when the laptop is not in use. This doesn't happen with Windows or Solus.&#xA;This is probably damaging the battery and I hope somebody has a solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The battery life is actually ok when in use since I installed tlp with the default configuration (the displayed battery life is 9 hours when in light usage, same as Windows 10).&#xA;Has anyone encountered something similar and come up with a solution?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit : I suspect this is because elementary doesn't shut down properly on my computer most of the time, the screen is black but still lit and the computer is unresponsive and must be shut down with the power button.&#xA;Edit2 : I added the &quot;nomodeset&quot; to the grub options and shutdown/reboot works fine now. However I can't resume from hibernation anymore : I get a black screen and I can't even open a tty session.&lt;/p&gt;&#xA;" OwnerUserId="23063" LastEditorUserId="23063" LastEditDate="2020-06-14T12:41:09.160" LastActivityDate="2020-06-14T12:41:09.160" Title="EOS won't shut down [SOLVED]" Tags="|battery|shutdown|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="24740" PostTypeId="1" CreationDate="2020-05-30T02:34:45.283" Score="2" ViewCount="1941" Body="&lt;p&gt;Today I bought a cheap usb bluetooth adapter to use it with my bluetooth headphones, and I've tried to connect them and use them. When I try to connect them it either says &lt;code&gt;Unable to connect&lt;/code&gt; or asks me for a pin (Which it shouldn't do) and no matter what I put on the input, it says connected just to get disconnected after 5 minutes, and in these 5 minutes the headphones don't appear in the sound settings. So it's either not connecting or I'm missing something :(&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm using &lt;code&gt;elementary OS 5.1.4 Hera&lt;/code&gt; with &lt;code&gt;Linux 4.15.0-101-generic&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried several fixes and I'm truly using this as my last resort&#xA;Thanks in advance for any help :)&lt;/p&gt;&#xA;" OwnerUserId="23065" LastActivityDate="2024-02-12T23:02:15.263" Title="Bluetooth headphones don't work at all :(" Tags="|release-hera|sound|bluetooth|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24741" PostTypeId="1" CreationDate="2020-05-30T06:56:59.433" Score="1" ViewCount="667" Body="&lt;p&gt;I have a late 2006 MacBook (MacBook2,1).&#xA;I downloaded Elementary OS (5.1, Hera) and plunked it on a USB stick.&#xA;I tried in in &quot;live mode&quot; and all was good.&#xA;I committed to installing eOS and it was nearly done but died with this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to install GRUB in /dev/sda&#xA;Executing 'grub-install /dev/sda' failed.&#xA;This is a fatal error.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I clicked &quot;OK&quot; and got this:&#xA;    Installer crashed&#xA;    (stuff about auto-filing a bug report)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I clicked &quot;CLOSE&quot;&#xA;I then got a dialog saying that the installer encountered an &quot;... unrecoverable error&quot; and a desktop session will start so that I may investigate the problem.&#xA;I clicked &quot;OK&quot; and got a desktop.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I reboot the machine, I am now presented a grub prompt.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I web searched and web searched and found &lt;a href=&quot;https://bit.ly/2XcO2Ii&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bit.ly/2XcO2Ii&lt;/a&gt; and &lt;a href=&quot;https://bit.ly/3dhpJ1t&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bit.ly/3dhpJ1t&lt;/a&gt;  Both these sites are ostensibly the same.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I followed the magic spell given: I proceed with a &quot;manual boot,&quot; i.e.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I located (hd0,gpt2)/boot/grub&lt;/li&gt;&#xA;&lt;li&gt;set root=(hd0,gpt2)&lt;/li&gt;&#xA;&lt;li&gt;Got the UUID of the partition&lt;/li&gt;&#xA;&lt;li&gt;Ran linux /boot/vmlinuz...&lt;/li&gt;&#xA;&lt;li&gt;Ran initrd /boot/initrd...&lt;/li&gt;&#xA;&lt;li&gt;Ran boot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;The system came up.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Moving on to fixing the EFI partition ...&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I ran sudo add-apt-repository ppa:detly/mactel-utils&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It failed; turns out I needed to first install &quot;software-properties-common&quot; first ... I did so.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Re-ran sudo add-apt-repository ppa:detly/mactel-utils and got this error:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Err:9 http://ppa.launchpad.net/detly/mactel-utils/ubuntu bionic Release&#xA;    404 Not Found [IP: 91.189.95.83 80]&#xA;E: The repository 'http://ppa.launchpad.net/detly/mactel-utils/bionic Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I'm now dead in the water. Since I can't install mactel-boot et al. (as per the web page), this whole endeavor is a failure at this point. I'm at a loss as to what to do next.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've searched SE for solutions but may are outdated, reference Windows/dual booting, or are straight-up contradictory, e.g. same thread: &quot;The solution is to boot to USB and NOT UEFI&quot; v. &quot;You need to install from the UEFI partition on your eOS USB stick&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For the record, I am &lt;em&gt;NOT&lt;/em&gt; interested in dual booting.&#xA;I do &lt;em&gt;NOT&lt;/em&gt; care about preserving the HD's previous content or structure.&#xA;All I want is a fresh, clean eOS install.&lt;/p&gt;&#xA;" OwnerUserId="23062" LastActivityDate="2024-02-10T03:06:45.790" Title="Hera (5.1) - MacBook; Installation failed at grub install" Tags="|release-hera|grub|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24743" PostTypeId="1" AcceptedAnswerId="24753" CreationDate="2020-05-30T13:42:13.827" Score="0" ViewCount="250" Body="&lt;p&gt;I just installed elementary OS 5.1.3 and when I click check for updates, it opens the appcenter which reports errors with the apt repositories:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;E: The repository 'http://packages.elementary.io/appcenter hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://security.ubuntu.com/ubuntu hera-security Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ca.archive.ubuntu.com/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ca.archive.ubuntu.com/ubuntu hera-updates Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ca.archive.ubuntu.com/ubuntu hera-backports Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4275" LastEditorUserId="4275" LastEditDate="2020-05-30T17:12:36.377" LastActivityDate="2020-05-31T09:56:04.863" Title="Need to fix apt repositories in 5.1.3" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24744" PostTypeId="2" ParentId="21856" CreationDate="2020-05-30T15:16:51.430" Score="1" Body="&lt;p&gt;It's possible. Open the terminal and copy/paste;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;nano ~/.config/gtk-3.0/gtk.css&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;.panel.maximized {&#xA;&#xA;background-color: rgba(255,255,255,0.0);&#xA;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save: [ctrl]+[o]&#xA;Exit: [ctrl]+[x]&#xA;Logout and login.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-30T15:16:51.430" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24746" PostTypeId="2" ParentId="24741" CreationDate="2020-05-30T22:02:32.827" Score="0" Body="&lt;p&gt;Macbook2,1 has 32bit EFI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Normal grub tries to install 64bit efi loader, so &lt;/p&gt;&#xA;&#xA;&lt;p&gt;You need to Install grub-efi-ia32 and run grub-install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here I have a bookmark which describes the whole installation process on Macbook2,1.&#xA;&lt;a href=&quot;https://cloud-infra.engineer/installing-elementary-os-on-my-late-2006-macbook/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://cloud-infra.engineer/installing-elementary-os-on-my-late-2006-macbook/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9770" LastActivityDate="2020-05-30T22:02:32.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24748" PostTypeId="1" CreationDate="2020-05-31T04:35:03.790" Score="0" ViewCount="36" Body="&lt;p&gt;What is the password for OS 4.1 Loki operating system, terminal application ? While attempting to update or upgrade to a newer OS terminal requires a password. How do I locate it ?&lt;/p&gt;&#xA;" OwnerUserId="16280" LastActivityDate="2020-06-30T06:01:00.153" Title="Terminal password" Tags="|system-installation|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24749" PostTypeId="2" ParentId="24748" CreationDate="2020-05-31T05:46:21.273" Score="1" Body="&lt;p&gt;It's the same you used to login to your account on eOS. That in mind that your are the administrator of that system.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-05-31T05:46:21.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24750" PostTypeId="2" ParentId="23967" CreationDate="2020-05-31T06:56:30.020" Score="1" Body="&lt;p&gt;Worked it out by doing the following:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;~/.local/share/applications&#xA;./start-tor-browser.desktop --register-app&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now Tor is sitting in my Applications launch area. I had no idea hwo to do this until I saw your instructions above. Many thanks.&lt;/p&gt;&#xA;" OwnerUserId="23073" LastActivityDate="2020-05-31T06:56:30.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24752" PostTypeId="1" CreationDate="2020-05-31T09:23:27.113" Score="0" ViewCount="291" Body="&lt;p&gt;I'm trying solve drivers issues with WiFi card in object. I tried various unsuccessfull threads.&#xA;Anyone solved this problem before?&lt;/p&gt;&#xA;" OwnerUserId="23075" LastActivityDate="2024-02-20T18:07:46.017" Title="Problems with Realtek 8822CE WLAN Card" Tags="|drivers|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24753" PostTypeId="2" ParentId="24743" CreationDate="2020-05-31T09:51:02.230" Score="0" Body="&lt;p&gt;And you haven't changed anything? Because I really don't get what's happened here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The issue is that it's pointing to &quot;hera&quot; in the repository, which doesn't exist. It has to be &quot;bionic&quot;. I know there's a way to reset apt, but I'm not sure how it'll handle the PPAs of elementary, meaning, you'll have to edit them yourself.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You'll have to edit /etc/apt/sources.list and every file in /etc/apt/sources.list.d/ and change every occurrence of &quot;hera&quot; to &quot;bionic&quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's a little guide to using sed. &lt;a href=&quot;https://www.cyberciti.biz/faq/how-to-use-sed-to-find-and-replace-text-in-files-in-linux-unix-shell/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cyberciti.biz/faq/how-to-use-sed-to-find-and-replace-text-in-files-in-linux-unix-shell/&lt;/a&gt;&#xA;It might be a good idea to make copies of the files you're editing beforehand, just in case. :)&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-05-31T09:56:04.863" LastActivityDate="2020-05-31T09:56:04.863" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24754" PostTypeId="1" AcceptedAnswerId="24755" CreationDate="2020-05-31T15:20:47.057" Score="1" ViewCount="1216" Body="&lt;p&gt;I just installed Elementary OS and some applications aren't available in the &lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS#Development&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppCenter&lt;/a&gt; such as Chrome, so I downloaded the &lt;em&gt;.deb&lt;/em&gt; file, but I cannot double-click to install it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/7542/how-can-i-install-deb-files-in-loki/7664#7664&quot;&gt;An answer suggested&lt;/a&gt; to install &lt;em&gt;gnome-software&lt;/em&gt; which I did, but now I have two app centers... Is there a way to incorporate that double-click feature in the native AppCenter?&lt;/p&gt;&#xA;" OwnerUserId="23076" LastEditorUserId="482" LastEditDate="2022-01-03T18:59:28.017" LastActivityDate="2022-01-03T18:59:28.017" Title="Installing .deb file with a double-click" Tags="|appcenter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24755" PostTypeId="2" ParentId="24754" CreationDate="2020-05-31T18:43:29.807" Score="1" Body="&lt;p&gt;Wow, that was an awful suggestion.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;First&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Always, always, ALWAYS! make sure you can trust the deb you've downloaded.&lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Before you install a .deb&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;Before telling you how to install it, I would ask you to check if they have the software in:&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Flathub&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;flathub&lt;/a&gt; because then you can click install there, download the .ref, click it in files, and appcenter will offer to install it for you (which will add flathub as a source in appcenter, allowing you to search their apps through it). flatpaks run in confinement, and this adds a layer of security as they can't access all parts of your system (well, in theory)&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Snap store&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Now, elementary OS does not have direct snap support, in that, &lt;code&gt;snapd&lt;/code&gt; is not installed by default. But this is another 'containerized' format, snapd keeps these apps up to date, which can either be annoying or practical depending on how you look at it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If you decide to use snaps, I would suggest doing the following:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;you can read instructions to &lt;a href=&quot;https://snapcraft.io/docs/installing-snap-on-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;get started with snapd here&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;install the third party snap frontend for elementary OS developed by Bart Zaalberg available &lt;a href=&quot;https://appcenter.elementary.io/com.github.bartzaalberg.snaptastic&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to the &lt;a href=&quot;https://snapcraft.io/store&quot; rel=&quot;nofollow noreferrer&quot;&gt;snap store&lt;/a&gt; and install apps by clicking the install button in the right upper corner, and then clicking 'desktop store' then your URL handler should ask you how you want to open the URL for which you choose snaptastic.&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;h2&gt;Your options for installing a .deb the GUI way&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;So far as i am aware, you have two options for installing .debs through the GUI&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;Eddy&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;Well, to install a .deb, i recommend installing &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt; it's a curated app, so it looks native, and lives in the AppCenter. The only thing I would note here, is that I have had a situation where it did not install a dependency.&lt;/p&gt;&#xA;&#xA;&lt;h3&gt;gDebi&lt;/h3&gt;&#xA;&#xA;&lt;p&gt;If you want to have more details available whilst installing, you might go for gdebi instead, which you can also find in AppCenter. it is not a native app though and can look a bit weird. &lt;/p&gt;&#xA;&#xA;&lt;h2&gt;Lastly the CLI option&lt;/h2&gt;&#xA;&#xA;&lt;p&gt;If you decide to go the CLI route instead you can right click in your folder where the package (lets call it: blah.deb) is reciding, and click &quot;open in terminal&quot; and then type the following command:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg -i blah.deb&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this may result in a partial install, say, if there are uninstalled dependencies, so you might want to follow it up with:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --configure -a&lt;/code&gt; &lt;/p&gt;&#xA;" OwnerUserId="9615" LastEditorUserId="9615" LastEditDate="2020-05-31T18:55:39.507" LastActivityDate="2020-05-31T18:55:39.507" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24757" PostTypeId="2" ParentId="24754" CreationDate="2020-05-31T19:57:30.280" Score="1" Body="&lt;p&gt;I would recommend using Eddy, which is a free .deb installer on the AppCenter.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to use:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install Eddy (A restart might be necessary)&lt;/li&gt;&#xA;&lt;li&gt;Open Eddy&lt;/li&gt;&#xA;&lt;li&gt;Press the &quot;Open&quot; button. This will open the &quot;Files&quot; app.&lt;/li&gt;&#xA;&lt;li&gt;Choose the Debian package you want to install.&lt;/li&gt;&#xA;&lt;li&gt;This will automatically load into Eddy.&lt;/li&gt;&#xA;&lt;li&gt;Now just press install. You might be prompted to type your password.&lt;/li&gt;&#xA;&lt;li&gt;The App should now be installed. You might have to restart when the App is not shown on the menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="23078" LastActivityDate="2020-05-31T19:57:30.280" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24758" PostTypeId="1" CreationDate="2020-05-31T20:13:39.053" Score="0" ViewCount="34" Body="&lt;p&gt;I have been trying to install the keyboard layout I use to type my regional language but the language is not shown in keyboard layou&lt;/p&gt;&#xA;" OwnerUserId="23079" LastActivityDate="2024-03-28T14:03:40.450" Title="Indian language Malayalam not available on Keyboard Layouts" Tags="|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24759" PostTypeId="1" CreationDate="2020-05-31T20:42:11.847" Score="0" ViewCount="199" Body="&lt;p&gt;So I got lucky to hit the only card that doesn't get sound, card is recognized but there's simply no sound and I read that it's related to &lt;a href=&quot;https://bugzilla.kernel.org/show_bug.cgi?id=55541&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.kernel.org/show_bug.cgi?id=55541&lt;/a&gt;&#xA;what are the steps, if possible, to compile my custom kernel to include that fix ?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I'm also using a Y splitter so speakers + headphones redirect to the same hole.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BVM8v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BVM8v.png&quot; alt=&quot;alsamixer output&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23076" LastEditorUserId="23076" LastEditDate="2020-06-03T16:43:38.693" LastActivityDate="2024-03-15T02:03:20.570" Title="Compiling new kernel for sound issue (Sound Blaster Z)" Tags="|sound|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24763" PostTypeId="2" ParentId="24759" CreationDate="2020-06-01T12:14:32.557" Score="0" Body="&lt;p&gt;Edit: It goes without saying (right?) that you should check systemsettings &gt; sound and make sure you're not muted, and have the proper output picked.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There's no reason to compile anything. As of kernel 4.18 or 4.20 (I don't recall which) the Soundblaster Z has been included. It's possible you just need the &quot;linux-firmware&quot; package.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Not knowing what kernel you're currently on, run the following in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04 linux-firmware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;And then reboot once done.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If that doesn't work, open up a terminal and type &quot;alsamixer&quot;. If you have other sound cards in your pc, hit F6 and pick the one that says &quot;HDA Creative&quot;, and make sure the different outputs aren't muted. Once you're done fiddling around, exit by pressing Esc, and then type &quot;sudo alsactl store&quot;, fill in your password.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-06-01T13:06:41.600" LastActivityDate="2020-06-01T13:06:41.600" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24764" PostTypeId="1" CreationDate="2020-06-01T12:27:48.313" Score="0" ViewCount="102" Body="&lt;p&gt;Currently, I'm using elementary OS, which is a fine distro with a great UI, but previous to this I have been using i3 (on Arch and Ubuntu) and I really miss the window management aspect using simple keybindings. I have been looking around for a while on how to manipulate the location and size of active (and maybe in extension inactive windows). I know that I can create custom keyboard shortcuts and all in the system settings, but the problem is that I don't know the exact command to make the windows behave the way I want after pressing the desired keybinding.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Specifically, there are two scenarios I want to adress: The first is that I want to have a vertical split between two windows, the left one (width=4/7) and the right one (width=3/7), kind of similar to the dwm layout.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;----------------&#xA;|1      |2     |&#xA;|       |      |  &#xA;|       |      |&#xA;|       |      |&#xA;----------------&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The second is that I want a 3 window slip. So the first window is on the left-hand side and has a width equal to half the monitor size and the second and third windows are on the right-hand side and are split horizontally, similar to any tiling window manager.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;---------------&#xA;|1     |2     |&#xA;|      |      |&#xA;|      |------|&#xA;|      |3     |&#xA;|      |      |&#xA;---------------&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Another (possible) binding I want to have, is the option to switch the position of the active window with the master window (window 1).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I know that I could just go back to i3 or dwm to have these binding, but I really want to make this work in my current UI.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I hope somebody can help me.&lt;/p&gt;&#xA;" OwnerUserId="23090" LastActivityDate="2020-06-14T13:15:45.757" Title="Commands for window management on elementaryOS (or ubuntu-based systems in general)" Tags="|keyboard-shortcuts|window-management|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24766" PostTypeId="2" ParentId="24577" CreationDate="2020-06-01T15:29:10.200" Score="0" Body="&lt;p&gt;System Settings &gt; Mouse &amp;amp; Touchpad &gt; Click has the option you're searching for.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aDQ8Z.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aDQ8Z.gif&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastActivityDate="2020-06-01T15:29:10.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24770" PostTypeId="1" CreationDate="2020-06-01T20:25:17.080" Score="0" ViewCount="985" Body="&lt;p&gt;When elementary loads the NIC does not have an IP and i need to manuuly configure it every boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When trying to edit network connection through settings I get &quot;did not find with UUID &quot;&quot; &quot;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I fix it?&lt;/p&gt;&#xA;" OwnerUserId="23093" LastActivityDate="2020-07-14T09:06:00.647" Title="Error editing connection Unable to find a connection with UUID ('null')" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24771" PostTypeId="1" CreationDate="2020-06-01T22:27:57.470" Score="0" ViewCount="36" Body="&lt;p&gt;Usually the Wingpanel goes transparent when there is no window maximized. But when I have a windows maximized and then click on the Desktop icon (placed from the Docklets by &lt;code&gt;Ctrl + right click&lt;/code&gt; on the dock), it shows the desktop but the wingpanel remains black. Not important but just thought I'd report. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="22628" LastActivityDate="2020-06-01T22:27:57.470" Title="Wingpanel remains black after clicking on the Desktop icon" Tags="|wingpanel|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24773" PostTypeId="2" ParentId="8382" CreationDate="2020-06-02T03:46:32.760" Score="0" Body="&lt;p&gt;In my case with Hp laptop the solution was disable secure boot and enable legacy &#xA;tutorial here &lt;a href=&quot;https://support.hp.com/us-en/document/c04784866&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.hp.com/us-en/document/c04784866&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20804" LastActivityDate="2020-06-02T03:46:32.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24774" PostTypeId="1" CreationDate="2020-06-02T05:24:53.123" Score="0" ViewCount="249" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sfg16.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sfg16.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I can't use vscode intergrated terminal in my elementary OS. I use zsh shell with powerlevel10k theme.&lt;/p&gt;&#xA;" OwnerUserId="23099" LastActivityDate="2024-03-17T01:08:36.023" Title="VSCode Integrated Terminal does not work in elementary OS Juno" Tags="|vscode|zsh|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24775" PostTypeId="1" CreationDate="2020-06-02T06:40:53.320" Score="0" ViewCount="158" Body="&lt;p&gt;Yesterday I start work and take my laptop to office. In home I have automount NFS drive. Now in my office I cannot start Pantheon-files - &quot;Window is not Responding...&quot; It works when I run from terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Regards Przemek&lt;/p&gt;&#xA;" OwnerUserId="22767" LastEditorUserId="22767" LastEditDate="2020-06-02T06:50:27.067" LastActivityDate="2020-06-02T06:50:27.067" Title="Pantheon-files crash" Tags="|pantheon-files|" AnswerCount="0" CommentCount="12" ContentLicense="CC BY-SA 4.0" />
  <row Id="24776" PostTypeId="2" ParentId="24365" CreationDate="2020-06-02T12:46:22.787" Score="1" Body="&lt;p&gt;There is a plus (+) and a minus (-) button at the bottom left corner of the User Accounts window to add or delete accounts. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To delete an account, select the account and click on the minus button. You need to be an Administrator to delete an account. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Yqmxj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Yqmxj.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="5809" LastActivityDate="2020-06-02T12:46:22.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24780" PostTypeId="1" CreationDate="2020-06-02T23:03:35.773" Score="0" ViewCount="110" Body="&lt;p&gt;I am attempting to remote access my machine, and only have SSH available to me right now. I have the VNC Viewer installed on my workstation, and installed a VNC Server on my ElementaryOS computer using &lt;code&gt;apt install tightvncserver&lt;/code&gt;. I started it (as a regular user), but I only see a grey screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My ~/.vnc/xstartup file looks like this now:&lt;/p&gt;&#xA;&#xA;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;xrdb $HOME/.Xresources&#xA;xsetroot -solid grey&#xA;#x-terminal-emulator -geometry 80x24+10+10 -ls -title &quot;$VNCDESKTOP Desktop&quot; &amp;amp;&#xA;#x-window-manager &amp;amp;&#xA;# Fix to make GNOME work&#xA;&#xA;&#xA;export XKL_XMODMAP_DISABLE=1&#xA;/etc/X11/Xsession&#xA;exec /usr/sbin/lightdm-session 'gnome-session --session=pantheon'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;When I run &lt;code&gt;vncserver&lt;/code&gt;, and connect to the display it creates, I only see a grey screen. What am I doing wrong?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RMm91.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RMm91.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3373" LastEditorUserId="3373" LastEditDate="2020-06-09T01:14:24.727" LastActivityDate="2020-06-09T01:14:24.727" Title="VNC Server installed from SSH only shows grey screen" Tags="|xorg|vnc|" AnswerCount="0" CommentCount="2" ClosedDate="2020-06-11T16:38:53.650" ContentLicense="CC BY-SA 4.0" />
  <row Id="24782" PostTypeId="1" CreationDate="2020-06-03T04:48:26.157" Score="1" ViewCount="51" Body="&lt;p&gt;Just recently ... within the past few weeks ... i have noticed that application update is no longer prompting me for a password.&#xA;I have not noticed anything about this on updates. Is this working properly?&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2024-01-14T15:06:10.657" Title="application update no longer needs a password? (elementary OS 5.1.5 Hera" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24784" PostTypeId="2" ParentId="24782" CreationDate="2020-06-03T09:46:35.597" Score="0" Body="&lt;p&gt;This is intended, and you clearly could've checked more thoroughly before posting about it on a support forum.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/appcenter/releases/tag/3.4.0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/releases/tag/3.4.0&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastActivityDate="2020-06-03T09:46:35.597" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24786" PostTypeId="2" ParentId="24740" CreationDate="2020-06-03T13:16:36.977" Score="0" Body="&lt;p&gt;It is a possibility the bluetooth adapter just isn't supported in your current kernel. I'd recommend upgrading with the ubuntu HWE, and then making sure the &quot;linux-firmware&quot; package is installed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Run the following in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt-get install --install-recommends linux-generic-hwe-18.04 xserver-xorg-hwe-18.04 linux-firmware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then reboot and test if it works.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-06-03T13:54:10.643" LastActivityDate="2020-06-03T13:54:10.643" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24789" PostTypeId="2" ParentId="16102" CreationDate="2020-06-03T15:56:30.833" Score="1" Body="&lt;p&gt;There are so many conflicting posts on getting WiFi working on MacBooks, so after spending hours of trial and error, featuring completely reinstalling Elementary OS and starting over several times,  I’m posting what worked for me. I hope it’s useful to someone!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My MacBook Pro is  mid-2010 (7,1).  Make sure your WiFi module is the same Broadcom as mine by first issuing this command in Terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt; lspci -nnk | grep 14e4:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Check to make sure the output shows the Wireless LAN Controller is [14e4:432b], like mine. If yours is different it may need a different procedure to get the WiFi working.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I found the answer that worked here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1188364/wifi-not-discovering-networks-ubuntu-18-04-macbook-pro-mid-2010&quot;&gt;https://askubuntu.com/questions/1188364/wifi-not-discovering-networks-ubuntu-18-04-macbook-pro-mid-2010&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;These are the instructions from that post that worked for me, edited to show what I had to do that was different for Elementary OS:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;open APPCenter, lick on Installed, then uninstall the 'bcm-kernel-source' package&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;make sure that the 'firmware-b43-installer' and the 'b43-fwcutter' packages are installed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;(terminal: &lt;code&gt;sudo apt-get install firmware-b43-installer&lt;/code&gt; followed by &lt;code&gt;sudo apt-get install b43-fwcutter&lt;/code&gt;)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;type into terminal:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;cat /etc/modprobe.d/* | grep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl| lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3 |rt6|rt7|witch|wl&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(you may want to copy this) and see if the term 'blacklist bcm43xx' is there. (it was for me)&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;if it is, &lt;code&gt;cd /etc/modprobe.d/&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;code&gt;sudo gedit blacklist.conf&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;(I had to install gedit first: &lt;code&gt;sudo apt-get install gedit&lt;/code&gt;)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;put a &lt;code&gt;#&lt;/code&gt; in front of the line: &lt;code&gt;blacklist bcm43xx&lt;/code&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly)&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;reboot&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo iw reg set &quot;REGION&quot;&lt;/code&gt;&lt;/p&gt;&lt;/li&gt;&#xA;&lt;li&gt;reboot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;IMPORTANT:&lt;/strong&gt; &quot;REGION&quot; should be replaced by the ISO alpha-2 2-character country code where you're using the computer, which can be found at this Wikipedia entry (scroll down):  &lt;a href=&quot;https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is important because the Broadcom WiFi in the computer can operate on a wide range of frequencies, and each country regulates what can be used for WiFi by devices in their country. If you don't set this correctly, and reset it if you travel to a different country, it is possible (not all that likely, but possible) that your computer could cause interference to completely different wireless services. (As a former frequency coordinator for the Society of Broadcast Engineers this is all the more important to me.)&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And thanks for fixing the formatting!&lt;/p&gt;&#xA;" OwnerUserId="23092" LastEditorUserId="23092" LastEditDate="2020-06-10T13:11:19.570" LastActivityDate="2020-06-10T13:11:19.570" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24792" PostTypeId="1" CreationDate="2020-06-03T19:31:44.193" Score="0" ViewCount="66" Body="&lt;p&gt;I have a Dell e6420. The keyboard light is not working with elementary OS. How is it possible to fix it?&lt;/p&gt;&#xA;" OwnerUserId="23118" LastEditorUserId="84" LastEditDate="2021-08-10T16:06:44.120" LastActivityDate="2023-12-29T00:05:35.693" Title="How to switch the keyboard light on?" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24794" PostTypeId="2" ParentId="24119" CreationDate="2020-06-04T00:12:41.920" Score="0" Body="&lt;p&gt;I was having the same problem a couple of days ago. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Couldn't figure out anything so in the end I replaced the default terminal with the gnome terminal. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I did was:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install gnome terminal&lt;/li&gt;&#xA;&lt;li&gt;open dconf &lt;/li&gt;&#xA;&lt;li&gt;change /org/gnome/desktop/applications/terminal/exec from io.elementary.terminal to gnome-terminal&lt;/li&gt;&#xA;&lt;li&gt;change exec-arg to ''&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="23091" LastActivityDate="2020-06-04T00:12:41.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24795" PostTypeId="1" CreationDate="2020-06-04T04:03:01.543" Score="1" ViewCount="43" Body="&lt;p&gt;I installed Gnome Shell and the i uninstalled... All is fine but when Start the computer it shows an image that says &quot;Debian 8&quot;, then Show a animation of Elementary, before the Login Screen. I want to quit that image of Debian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I try this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21067/how-to-restore-elementary-boot-logo-in-grub-file&quot;&gt;How to restore elementary boot logo in grub file&lt;/a&gt; and did not work... What can i do?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sorry for my bad English, i am for El Salvador, CA.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: I understand that Plymouth Themes change the animation during eos is charging right? Well... That it's fine. But before that, show the image. I don't have other so installed, so don't show me the grub menu, only that image... Maybe with make menuconfig? But I'm afraid to touch the kernel and break my system.&lt;/p&gt;&#xA;" OwnerUserId="23119" LastEditorUserId="23119" LastEditDate="2020-06-04T06:26:47.247" LastActivityDate="2020-06-04T06:26:47.247" Title="How to quit Debian Logo on Startup, after install Gnome-Shell" Tags="|boot|logo|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24796" PostTypeId="1" CreationDate="2020-06-04T05:07:16.660" Score="0" ViewCount="58" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;Err:12 &lt;a href=&quot;http://apt.postgresql.org/pub/repos/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://apt.postgresql.org/pub/repos/apt&lt;/a&gt;&#xA;  YOUR_UBUNTU_VERSION_HERE-pgdg Release              404  Not Found [IP:&#xA;  &quot;myip&quot;]&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;E: The repository '&lt;a href=&quot;http://apt.postgresql.org/pub/repos/apt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://apt.postgresql.org/pub/repos/apt&lt;/a&gt;&#xA;  YOUR_UBUNTU_VERSION_HERE-pgdg Release' does not have a Release file.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;N: Updating from such a repository can't be done securely, and is&#xA;  therefore disabled by default.&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;N: See apt-secure(8) manpage for&lt;/p&gt;&#xA;  &#xA;  &lt;p&gt;repository creation and user configuration details.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23120" LastActivityDate="2024-02-16T01:07:25.920" Title="Error in update time elementry os" Tags="|release-hera|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24797" PostTypeId="2" ParentId="21289" CreationDate="2020-06-04T05:28:05.100" Score="0" Body="&lt;p&gt;Same problem here&#xA;I've got 2 monitors (Samsung, 2048x1152, primary; LG, 1680x1050). &#xA;After (re)boot: the resolution on the primary screen is correct.&#xA;After login: on lock screen, the resolution changes to 1280x1024.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;here my xrandr-infos from lock screen:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 1280 x 1024, current 1280 x 1024, maximum 1280 x 1024&#xA;default connected 1280x1024+0+0 0mm x 0mm&#xA;   1280x1024     77.00* &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;After unlock screen the resolution changes back to the correct values. But sometimes my desktop is pixelated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already tried to create a script like here: &#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2181/pantheon-greeter-login-screen-has-incorrect-resolution-on-external-monitor&quot;&gt;Pantheon-greeter login screen has incorrect resolution on external monitor&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But it does'nt work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any other ideas? &lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;Update: &#xA;I've got this issue after install nvidia driver 340.108&lt;/p&gt;&#xA;" OwnerUserId="21156" LastEditorUserId="21156" LastEditDate="2020-06-04T06:26:14.387" LastActivityDate="2020-06-04T06:26:14.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24798" PostTypeId="2" ParentId="24796" CreationDate="2020-06-04T07:44:59.750" Score="0" Body="&lt;p&gt;You have somehow added PPA's without changing the text &lt;strong&gt;YOUR_UBUNTU_VERSION_HERE-pgdg&lt;/strong&gt;. remove that lines and add &lt;strong&gt;bionic&lt;/strong&gt; instead. Or complete remove them from the sourcelist.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can find the file on postgresql in /etc/apt/sources.list.d and delete/edit it.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-04T07:44:59.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24800" PostTypeId="2" ParentId="24391" CreationDate="2020-06-04T15:36:47.967" Score="0" Body="&lt;p&gt;Try this in a terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -r /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;and then:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get clean &amp;amp;&amp;amp; sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Update will take some time because it's re-downloading all the files.&lt;/p&gt;&#xA;" OwnerDisplayName="user20763" LastEditorDisplayName="user20763" LastEditDate="2020-06-04T15:45:11.817" LastActivityDate="2020-06-04T15:45:11.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24801" PostTypeId="1" CreationDate="2020-06-04T15:44:13.143" Score="0" ViewCount="104" Body="&lt;p&gt;Tried everything listed for freya and other older distros.&#xA;Also tried editing the &lt;code&gt;/usr/etc/ligthdm/io.elementary.greeter.conf&lt;/code&gt; file but nothing changed. Don't know if it's a bug or something. Isn't there any way of changing the lock screen wallpaper through GUI?&lt;/p&gt;&#xA;" OwnerUserId="23121" LastActivityDate="2020-06-04T20:32:36.877" Title="How do i replace the grey background in 5.1.5 Hera with a specific wallpaper?" Tags="|greeter|wallpaper|bugs|" AnswerCount="1" CommentCount="0" ClosedDate="2020-06-12T04:45:29.053" ContentLicense="CC BY-SA 4.0" />
  <row Id="24802" PostTypeId="2" ParentId="12570" CreationDate="2020-06-04T17:07:53.813" Score="0" Body="&lt;p&gt;Maybe its a little bit too late, but maybe somebody else will need it:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can change the settings in&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$HOME/.local/share/pantheon-mail/&amp;lt;your mail-account&amp;gt;/geary.ini&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;with a normal editor. The settings in patheon mail are not changed so I don't know if it is something which will work in the future.&lt;/p&gt;&#xA;" OwnerUserId="9495" LastActivityDate="2020-06-04T17:07:53.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24803" PostTypeId="2" ParentId="24801" CreationDate="2020-06-04T20:32:36.877" Score="0" Body="&lt;p&gt;There an unofficial blur effect wallpaper lock screen. NOTE: It's unstable/experimental so use it at your own risk. You need to compile a specific greeter for eOS: &lt;a href=&quot;https://eos-techs.com/2020/05/20/howto-change-the-login-screen-with-blur-effect-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://eos-techs.com/2020/05/20/howto-change-the-login-screen-with-blur-effect-in-elementary-os/&lt;/a&gt;&#xA;It won't give you a specific wallpaper background, but it will drawn from the users wallpaper.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-04T20:32:36.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24806" PostTypeId="2" ParentId="24043" CreationDate="2020-06-05T03:38:56.583" Score="0" Body="&lt;p&gt;I'm having this same issue as well.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Reading through &lt;a href=&quot;https://github.com/elementary/gala/pull/780&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/pull/780&lt;/a&gt;, I see a fix listed here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/gala/commit/3f7cb0e251e842a3abc603be8cb0d26f8a478953&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/commit/3f7cb0e251e842a3abc603be8cb0d26f8a478953&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However, I'm unable to locate src/WindowManager.vala to perform the recommended edits.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For now, I'll just disable System Settings&gt;Tweaks&gt;Animations to see if that ameliorates it, and wait for an official fix.  If none comes about, Elementary OS gets replaced as this issue makes it too unstable to production use.&lt;/p&gt;&#xA;" OwnerUserId="19259" LastActivityDate="2020-06-05T03:38:56.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24807" PostTypeId="1" CreationDate="2020-06-05T05:26:08.113" Score="0" ViewCount="43" Body="&lt;p&gt;I just bought a new Metabox laptop with no pre-installed OS. I downloaded eOS v5.1.5 and installed it on the laptop with no issues. However, when I booted the laptop for the first time after installation (and each time thereafter), it gets to the login screen (I see my username, background, etc.), I enter my password, then after a few seconds of a blank screen with just the cursor, it displays the 'e' logo then shuts down.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Interestingly, I've noticed that it also happens when using the 'try' feature of the live USB (computer shuts down before booting to the desktop). However, doing the same thing with Linux Mint (running it off the live USB) doesn't have any issues (I can boot to the desktop fine).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The only thing I can think of is drivers. But the issue is I'm on a public wifi that requires a login via a webpage to connect (so I can't download drivers during the installation).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;UPDATE: I've since tried installing Linux Mint 19 on the laptop, and while it installed and booted ok (though without wifi), it did eventually freeze up and then try to shut down (similar to what happens with eOS).&lt;/p&gt;&#xA;" OwnerUserId="22337" LastEditorUserId="22337" LastEditDate="2020-06-05T06:25:26.183" LastActivityDate="2020-06-06T10:45:11.273" Title="Computer shuts down when trying to boot into eOS" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24808" PostTypeId="1" CreationDate="2020-06-05T06:30:50.500" Score="1" ViewCount="597" Body="&lt;p&gt;I am using the latest version of Elementary OS. I am trying to connect to my Yahoo Mail box, using Elementary's default mail client.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;From the welcome window I selected &quot;Yahoo Mail&quot; and added my correct credentials. The error is:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Unable to validate:&#xA;    - Connection error.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;I don't use &lt;code&gt;Two-step verification&lt;/code&gt; in my account. I also tried to use the Yahoo Mail &lt;code&gt;smtp&lt;/code&gt; and &lt;code&gt;imap&lt;/code&gt; details to connect to a &quot;custom server&quot; with no success.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I also tried this: &lt;a href=&quot;https://help.yahoo.com/kb/generate-third-party-passwords-sln15241.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.yahoo.com/kb/generate-third-party-passwords-sln15241.html&lt;/a&gt; (I don't know what should I write at &quot;Enter custom name&quot;, when generating password for an &quot;Other app&quot; - I tried with &quot;Elementary&quot;) and used the generated password. Same error happens.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Some advices?&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="23131" LastActivityDate="2024-02-21T08:02:05.260" Title="Email client does not working for Yahoo Mail" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24809" PostTypeId="1" CreationDate="2020-06-05T07:10:01.950" Score="0" ViewCount="128" Body="&lt;p&gt;Black screen after wake from suspend after 5.1.4 update with kernel on 5.3.0-53&lt;/p&gt;&#xA;" OwnerUserId="20611" LastActivityDate="2024-03-01T21:01:25.167" Title="Cannot wake from suspend after 5.1.4 update" Tags="|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24810" PostTypeId="1" AcceptedAnswerId="24821" CreationDate="2020-06-05T08:34:09.680" Score="1" ViewCount="509" Body="&lt;p&gt;This evening, I installed the latest stable release (version 10) of LLVM, Clang, etc.. I used these commands:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libllvm-10-ocaml-dev libllvm10 llvm-10 llvm-10-dev llvm-10-doc llvm-10-examples llvm-10-runtime&#xA;&#xA;sudo apt-get install clang-10 clang-tools-10 clang-10-doc libclang-common-10-dev libclang-10-dev libclang1-10 libclang-cpp10 libclang-cpp10-dev clang-tidy-10 clang-format-10 python3-clang-10 clangd-10&#xA;&#xA;sudo apt-get install libfuzzer-10-dev&#xA;&#xA;sudo apt-get install lldb-10 liblldb-10 liblldb-10-dev&#xA;&#xA;sudo apt-get install lld-10 liblld-10 liblld-10-dev&#xA;&#xA;sudo apt-get install libc++1-10 libc++-10-dev libc++abi1-10 libc++abi-10-dev&#xA;&#xA;sudo apt-get install libomp-10-dev libomp-10-doc &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It gave me a notice about some unneeded packages so I let autoremove take care of them. And then I discovered it uninstalled Steam! I'm not sure whether it was the apt-get install commands, or the autoremove that did it. I tried reinstalling Steam, but it gave errors about packages that WON'T be installed:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;  steam: Depends: libgl1-mesa-dri (&amp;gt;= 17.3) but it is not going to be installed or&#xA;                  libtxc-dxtn0 but it is not installable&#xA;         Depends: libgl1-mesa-dri but it is not going to be installed&#xA;         Depends: libgl1-mesa-glx but it is not going to be installed&#xA;         Recommends: nvidia-driver-libs-i386 but it is not installable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;So I tried uninstalling the latest LLVM et al, and going back to the previous state (by using the same commands but using &quot;remove&quot; instead of &quot;install&quot;), but it said it was going to remove everything I've ever installed!!!&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;The following packages were automatically installed and are no longer required:&#xA;  abiword-common ant ant-optional antlr audacity-data brasero-common browser-plugin-evince bwidget calculix-ccx camlp4 cdrdao chemical-mime-data comgr dvd+rw-tools epiphany-browser-data&#xA;  exuberant-ctags folks-common fonts-freefont-ttf freecad-runtime gconf-service gconf-service-backend gconf2-common gdal-data gir1.2-harfbuzz-0.0 gir1.2-nautilus-3.0 gnome-session-common&#xA;  gnome-settings-daemon growisofs gsignond-plugin-mail gthumb-data gvfs-libs hsa-ext-rocr-dev hsa-rocr-dev hsakmt-roct ibverbs-providers icu-devtools io.elementary.cerbere junit&#xA;  kicad-doc-en ledit lib3ds-1-3 libactivation-java libaec0 libantlr-java libaopalliance-java libappindicator3-0.1-cil libargs4j-java libaribb24-0 libarmadillo8 libarpack2 libasm-java&#xA;  libatinject-jsr330-api-java libatk-bridge2.0-dev libatk1.0-dev libatk3.0-cil libatspi2.0-dev libbasicusageenvironment1 libboost-regex1.65.1 libbrasero-media3-1 libbrotli1&#xA;  libcairo-script-interpreter2 libcairo1.10-cil libcairo2-dev libcamlp4-ocaml-dev libcddb2 libcdi-api-java libcdio-cdda2 libcdio-paranoia2 libcglib-java libclc-dev libcloudproviders0&#xA;  libclutter-1.0-common libcodecore0 libcodemodel-java libcogl-common libcommons-cli-java libcommons-codec-java libcommons-compress-java libcommons-lang3-java libctypes-ocaml&#xA;  libctypes-ocaml-dev libdap25 libdapclient6v5 libdbus-1-dev libdbus-glib2.0-cil libdbus2.0-cil libdc1394-22 libdca0 libdisasm0 libdouble-conversion1 libdrm-amdgpu1 libdrm-dev&#xA;  libdrm-nouveau2 libdrm-radeon1 libdtd-parser-java libdvbpsi10 libebml4v5 libecj-java libeditorconfig0 libegl-mesa0 libegl1 libegl1-mesa libelf-dev libepoxy-dev libepsilon1 libfaad2&#xA;  libfabric1 libfastinfoset-java libfindlib-ocaml libfindlib-ocaml-dev libflac++6v5 libflexdock-java libfolks-eds25 libfolks25 libfontconfig1-dev libfreehep-export-java&#xA;  libfreehep-graphics2d-java libfreehep-graphicsio-emf-java libfreehep-graphicsio-java libfreehep-graphicsio-tests-java libfreehep-io-java libfreehep-swing-java libfreehep-util-java&#xA;  libfreeimage3 libfreetype6-dev libfreexl1 libfyba0 libgbm1 libgconf-2-4 libgdal20 libgdk3.0-cil libgeos-3.6.2 libgeos-c1v5 libgeotiff2 libgeronimo-annotation-1.3-spec-java&#xA;  libgeronimo-interceptor-3.0-spec-java libgexiv2-2 libgio3.0-cil libgit2-26 libgit2-glib-1.0-0 libglapi-mesa libgles1 libgles2 libglib3.0-cil libgluegen2-jni libgluegen2-rt-java libglvnd0&#xA;  libgmime-2.6-0 libgmime-3.0-0 libgoffice-0.10-10 libgoffice-0.10-10-common libgraphene-1.0-0 libgraphite2-dev libgroupsock8 libgstreamer-plugins-bad1.0-0 libgtk3.0-cil libgtkspell3-3-0&#xA;  libguava-java libguice-java libharfbuzz-dev libharfbuzz-gobject0 libharfbuzz-icu0 libhawtjni-runtime-java libhdf4-0-alt libhdf5-100 libhdf5-openmpi-100 libhttp-parser2.7.1&#xA;  libhttpclient-java libhttpcore-java libhwloc-plugins libhwloc5 libibverbs1 libice-dev libicu-dev libicu-le-hb-dev libicu-le-hb0 libiculx60 libid3tag0 libinput-bin libinput10&#xA;  libistack-commons-java libjansi-java libjansi-native-java libjas-plotter-java libjavascriptcoregtk-3.0-0 libjavascriptcoregtk-4.0-18 libjaxb-api-java libjaxb-java libjeuclid-core-java&#xA;  libjgoodies-common-java libjgoodies-looks-java libjgraphx-java libjlatexmath-fop-java libjlatexmath-java libjogl2-java libjogl2-jni libjrosetta-java libjs-jquery-ui libjsoup-java&#xA;  libjsr305-java libjxr0 libkate1 libkmlbase1 libkmldom1 libkmlengine1 liblaf-plugin-java libldb1 liblightdm-gobject-1-0 liblilv-0-0 liblink-grammar5 liblirc-client0 liblivemedia62&#xA;  libloudmouth1-0 liblucene4.10-java libmad0 libmarkdown2 libmatio4 libmatroska6v5 libmaven-file-management-java libmaven-parent-java libmaven-resolver-java libmaven-shared-io-java&#xA;  libmaven-shared-utils-java libmaven3-core-java libmedc1v5 libmhash2 libmicrodns0 libminizip1 libmono-system-core4.0-cil libmpcdec6 libmtdev1 libmtp-common libmtp-runtime libmtp9&#xA;  libmuparser2v5 libnb-org-openide-util-java libnb-org-openide-util-lookup-java libncurses5-dev libnetcdf-c++4 libnetcdf13 libnfs11 libngspice-kicad libnl-route-3-200 libnotify3.0-cil&#xA;  libobs0 libocct-foundation-7.3 libocct-modeling-algorithms-7.3 libocct-modeling-data-7.3 liboce-foundation11 liboce-modeling11 liboce-ocaf-lite11 libodbc1 libogdi3.2 libopenal-data&#xA;  libopenal1 libopenctm1 libopenmpi2 libopenmpt-modplug1 libots0 libpango1.0-dev libpango3.0-cil libpantheon-files-core0 libpantheon-files-widgets0 libperl4-corelibs-perl libpfm4&#xA;  libpixman-1-dev libplacebo4 libplexus-archiver-java libplexus-cipher-java libplexus-classworlds-java libplexus-component-annotations-java libplexus-interpolation-java libplexus-io-java&#xA;  libplexus-sec-dispatcher-java libplexus-utils-java libplexus-utils2-java libportaudio2 libportsmf0v5 libproj12 libprotobuf-lite10 libproxy-tools libpsm-infinipath1 libpyside2-py3-5.11&#xA;  libqhull7 libqscintilla2-qt5-l10n libqt5concurrent5 libqt5core5a libqt5dbus5 libqt5network5 libqt5positioning5 libqt5qml5 libqt5sensors5 libqt5webchannel5 libqt5xml5 libqt5xmlpatterns5&#xA;  libraptor2-0 librasqal3 librdf0 librdmacm1 libregexp-java librelaxng-datatype-java libresid-builder0c2a librngom-java libsdl-image1.2 libsdl-ttf2.0-0 libsdl2-2.0-0 libserd-0-0&#xA;  libshiboken2-py3-5.11 libsidplay2 libsisu-guice-java libsisu-inject-java libsisu-ioc-java libsisu-plexus-java libskinlf-java libslf4j-java libsm-dev libsmbclient libsnappy-java&#xA;  libsnappy-jni libsnl0 libsord-0-0 libsoundtouch1 libspatialite7 libspnav0 libspooles2.2 libsratom-0-0 libssh2-1 libstax-ex-java libstreambuffer-java libsuperlu5 libsz2&#xA;  libtablelayout-java libtalloc2 libtbb2 libtelepathy-glib0 libtevent0 libtidy5 libtotem-plparser-common libtotem-plparser18 libtxw2-java libupnp6 liburiparser1 libusageenvironment3&#xA;  libva-wayland2 libvala-0.40-0 libvamp-hostsdk3v5 libvlc-bin libvlc5 libvlccore9 libvulkan1 libwacom-bin libwacom-common libwacom2 libwagon-http-java libwagon-provider-api-java&#xA;  libwayland-bin libwayland-dev libwayland-server0 libwbclient0 libwebkit2gtk-4.0-37-gtk2 libwoff1 libwv-1.2-4 libwxbase3.0-0v5 libxcb-dri2-0 libxcb-dri3-0 libxcb-glx0 libxcb-icccm4&#xA;  libxcb-image0 libxcb-keysyms1 libxcb-present0 libxcb-randr0 libxcb-render-util0 libxcb-render0-dev libxcb-res0 libxcb-shape0 libxcb-shm0-dev libxcb-sync1 libxcb-xinerama0 libxcb-xkb1&#xA;  libxcb-xv0 libxcomposite-dev libxcursor-dev libxdamage-dev libxerces-c3.2 libxext-dev libxfixes-dev libxfont2 libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxkbcommon-x11-0&#xA;  libxrandr-dev libxrender-dev libxshmfence1 libxsom-java libxtst-dev libxvmc1 libxxf86dga1 libxz-java libyajl2 libz3-4 libz3-dev libzinnia0v5 libzipios++0v5 link-grammar-dictionaries-en&#xA;  llvm-10-tools minisat mpi-default-bin mutter-common nautilus-data numlockx ocaml-base-nox ocaml-compiler-libs ocaml-findlib ocaml-interp ocaml-nox odbcinst odbcinst1debian2 openmpi-bin&#xA;  openmpi-common pgadmin3-data pgagent proj-bin proj-data python-matplotlib-data python-nautilus python-talloc python3-apport python3-certifi python3-cycler python3-dateutil&#xA;  python3-httplib2 python3-matplotlib python3-numpy python3-problem-report python3-pygments python3-pyparsing python3-pyside2.qtcore python3-pyside2.qtxml python3-pyside2uic&#xA;  python3-requests python3-requests-unixsocket python3-sip python3-tz python3-urllib3 qttranslations5-l10n rocm-opencl rocminfo samba-libs scilab-cli scilab-data scilab-doc scilab-include&#xA;  scilab-minimal-bin shiboken2 shotwell-common vlc-bin vlc-data vlc-l10n vlc-plugin-base vlc-plugin-notify vlc-plugin-samba vlc-plugin-video-splitter wayland-protocols x11-apps&#xA;  x11-session-utils x11proto-composite-dev x11proto-damage-dev x11proto-fixes-dev x11proto-randr-dev x11proto-record-dev x11proto-xext-dev x11proto-xinerama-dev xfonts-base xinit xinput&#xA;  xserver-common xserver-xorg-legacy-hwe-18.04 xsltproc yelp-xsl zenity-common&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following packages will be REMOVED:&#xA;  abiword abiword-plugin-grammar adwaita-qt audacity audience calculix-cgx capnet-assist clang-10 clang-format-10 clang-tidy-10 clang-tools-10 clangd-10 com.github.bharatkalluri.gifup&#xA;  com.github.mohelm97.screenrecorder com.github.philip-scott.notes-up com.github.robertsanseries.ciano default-jre elementary-default-settings elementary-desktop elementary-tweaks&#xA;  epiphany-browser ffmpeg freecad freecad-python3 freeglut3 gala glogg gnome-session-bin gnome-startup-applications gstreamer1.0-gl gstreamer1.0-vaapi gthumb gvfs gvfs-backends&#xA;  gvfs-daemons gvfs-fuse io.elementary.camera io.elementary.code javahelp2 kicad libabiword-3.0 libatk-wrapper-java libatk-wrapper-java-jni libavdevice57 libchamplain-0.12-0&#xA;  libchamplain-gtk-0.12-0 libclang-10-dev libclang-common-10-dev libclang-cpp10 libclang-cpp10-dev libclang1-10 libclc-amdgcn libclutter-1.0-0 libclutter-gst-3.0-0 libclutter-gtk-1.0-0&#xA;  libcogl-pango20 libcogl-path20 libcogl20 libcoin80c libedataserverui-1.2-2 libegl-dev libegl1-mesa-dev libfreecad-python3-0.18 libfuzzer-10-dev libgala0 libgl-dev libgl1 libgl1-mesa-dev&#xA;  libgl1-mesa-dri libgl1-mesa-glx libgl2ps1.4 libgles-dev libglew2.0 libglu1-mesa libglvnd-dev libglx-dev libglx-mesa0 libglx0 libgstreamer-gl1.0-0 libgtk-3-dev liblld-10 liblld-10-dev&#xA;  liblldb-10 liblldb-10-dev libllvm-10-ocaml-dev libllvm10 libmaya-calendar0 libmutter-2-0 libnglib-6.2 libocct-data-exchange-7.3 libocct-ocaf-7.3 libocct-visualization-7.3 liboce-ocaf11&#xA;  liboce-visualization11 libqscintilla2-qt5-13 libqt4-opengl libqt5gui5 libqt5opengl5 libqt5printsupport5 libqt5quick5 libqt5svg5 libqt5webkit5 libqt5widgets5 libqt5x11extras5 libsoqt520&#xA;  libsuil-0-0 libvtk7.1 libwebkit2-sharp-4.0-cil libwebkit2gtk-4.0-37 libwebkitgtk-3.0-0 libwxgtk3.0-0v5 libwxgtk3.0-gtk3-0v5 libxatracker2 libyelp0 lld-10 lldb-10 llvm-10 llvm-10-dev&#xA;  llvm-10-doc llvm-10-examples llvm-10-runtime maya-calendar maya-calendar-daemon maya-calendar-plugin-caldav maya-calendar-plugin-google mesa-common-dev mesa-va-drivers mesa-vdpau-drivers&#xA;  mesa-vulkan-drivers meshlab minecraft-launcher mozc-utils-gui netgen obs-plugins obs-studio openjdk-11-jre pantheon-files pantheon-greeter pantheon-mail&#xA;  pantheon-online-accounts-plugin-fastmail pantheon-online-accounts-plugin-lastfm pantheon-online-accounts-plugin-mail pantheon-photos pantheon-shell pantheon-xsession-settings pgadmin3&#xA;  python3-clang-10 python3-lldb-10 python3-pivy python3-pyside2.qtgui python3-pyside2.qtopengl python3-pyside2.qtsvg python3-pyside2.qtuitools python3-pyside2.qtwidgets python3-wxgtk4.0&#xA;  qt5-gtk-platformtheme qt5-image-formats-plugins rocm-clang-ocl rocm-opencl-dev rocm-utils scilab scilab-full-bin shotwell sparkleshare sqlitebrowser switchboard&#xA;  switchboard-plug-notifications switchboard-plug-online-accounts switchboard-plug-pantheon-shell va-driver-all vdpau-driver-all virtualbox-6.1 vlc vlc-plugin-qt vlc-plugin-skins2&#xA;  vlc-plugin-video-output vlc-plugin-visualization wingpanel wxhexeditor x11-utils xorg xserver-xorg-core-hwe-18.04 xserver-xorg-hwe-18.04 xserver-xorg-input-all-hwe-18.04&#xA;  xserver-xorg-input-libinput-hwe-18.04 xserver-xorg-input-wacom-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04 xserver-xorg-video-ati-hwe-18.04&#xA;  xserver-xorg-video-fbdev-hwe-18.04 xserver-xorg-video-intel-hwe-18.04 xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04 xserver-xorg-video-radeon-hwe-18.04&#xA;  xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04 yelp zenity&#xA;0 upgraded, 0 newly installed, 198 to remove and 1 not upgraded.&#xA;After this operation, 2,161 MB disk space will be freed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Why did installing a compiler bork my system? And how do I fix this?&lt;/p&gt;&#xA;" OwnerUserId="22433" LastEditorUserId="22433" LastEditDate="2020-06-06T11:24:11.820" LastActivityDate="2020-06-06T11:25:43.080" Title="(SOLVED) apt-get is trying to uninstall everything I've ever installed!" Tags="|apt|install|steam|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24811" PostTypeId="1" CreationDate="2020-06-05T13:17:20.180" Score="1" ViewCount="72" Body="&lt;p&gt;How can I can (can I?) filter only unread mails (or any other kind of filtering) in pantheon mail? Similar to how I would &quot;is:unread&quot; in gmail?&lt;/p&gt;&#xA;" OwnerUserId="18435" LastActivityDate="2020-06-05T13:17:20.180" Title="Search/filter only unread mail" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24813" PostTypeId="2" ParentId="24796" CreationDate="2020-06-05T15:26:14.883" Score="0" Body="&lt;p&gt;try &lt;a href=&quot;http://elementaryosguides.com/2020/06/05/failed-to-fetch-updates/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide, probably it's what your looking for.                                              &lt;/p&gt;&#xA;" OwnerUserId="23134" LastActivityDate="2020-06-05T15:26:14.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24816" PostTypeId="1" AcceptedAnswerId="24892" CreationDate="2020-06-06T04:14:02.117" Score="-1" ViewCount="1498" Body="&lt;p&gt;&lt;strong&gt;De antemano Saludos a quien pueda leer esto.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Estoy presentando un problema grave con mi elementary,&#xA;mi laptop es una toshiba satellite p-50-a-12z i7-4700 con una grafica nvidia GK107m Geforce GT 745M.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;la cosa va asi:&#xA;instalé los drivers nvidia desde la tienda, pero me salian varias opciones y las instale todas... :'( &lt;/p&gt;&#xA;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;nvidia-340&#xA;nvidia-driver-390&#xA;nvidia-driver-440&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;p&gt;según tengo entendido, la que me corresponde es la 440,pero tengo todas instaladas y no las puedo borrar, ni instalar una sola.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;trato de instalar con la orden&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install nvidia-driver-440&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;pero el sistema me devuelve:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;    nvidia-driver-440 ya esta en su version mas reciente (440.59-0ubuntu0.18.04.1).&#xA;    tal vez quiera ejecutar &amp;lt;&amp;lt;apt --fixbroken install&amp;gt;&amp;gt; para corregirlo.&#xA;&#xA;los siguientes paquetes tienen dependencias incumplidas:&#xA;libnvidia-ifr1-440 : depende: libnvidia-gl-440 pero no va a instalarse&#xA;libnvidia-ifr1-440:i386 : depende: libnvidia-gl-440:i386 pero no va a instalarse&#xA;nvidia-driver-440 : depende: libnvidia-gl-440 (= 440.59-0ubuntu0.18.04.1) pero no va a instalarse&#xA;recomienda : libnvidia-gl-440:i386(=440.59-0ubuntu0.18.04.1)&#xA;E: Dependencias incumplidas. Intente &amp;lt;&amp;lt;apt --fix-broken install&amp;gt;&amp;gt; sin paquetes (o espesidique una solución).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;intenté con:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ apt --fix-broken install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;tambien intenté resolverlo con este contenido:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://geekland.eu/reparar-paquetes-rotos-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://geekland.eu/reparar-paquetes-rotos-linux/&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;pero nada parece tener efecto, ya no se que hacer, esa es la laptop del trabajo por favor ayudenme.. :(&lt;/p&gt;&#xA;" OwnerUserId="23140" LastActivityDate="2020-06-13T06:15:46.857" Title="Problemas con mis Graficos nvidia" Tags="|graphic-drivers|nvidia|graphics|dependencies|black-screen|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24818" PostTypeId="2" ParentId="24816" CreationDate="2020-06-06T04:37:31.537" Score="0" Body="&lt;p&gt;I have used google translate to understand the question, so I hope I get it right.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;First remove all things related to the nvidia driver&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then install the 440 driver;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-driver-440&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-06T04:37:31.537" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24820" PostTypeId="2" ParentId="24807" CreationDate="2020-06-06T10:45:11.273" Score="1" Body="&lt;p&gt;I got it working. I believe the issue was not having internet during installation in order to download necessary drivers, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make sure it wasn't a hardware/warranty issue, I installed a copy of Win 10 on the laptop. During installation it asked for internet access, so I tried that and it actually popped up with the browser login thing. So I was able to connect to the wifi and Windows installed and worked properly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I then tried eOS again, I enabled wifi and it didn't ask for the login (I believe because the system had already authenticated my MAC address and so didn't need to again). So with internet enabled it installed fine and then worked properly after that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;All in all, the issue seemed to be specific to having a wifi connection that required a browser login (and eOS needing to download certain things for my specific hardware to work properly). If I was at home instead of a hotel, I believe I wouldn't have had any issues at all.&lt;/p&gt;&#xA;" OwnerUserId="22337" LastActivityDate="2020-06-06T10:45:11.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24821" PostTypeId="2" ParentId="24810" CreationDate="2020-06-06T11:25:43.080" Score="1" Body="&lt;p&gt;I finally got it fixed.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I had to remove the apt.llvm.org repository from the sources.list. Then I could use the Force Version command in Synaptic to switch over to using LLVM builds from the kisak PPA (which still provides i386 builds of LLVM). That enabled me to reinstall steam, because it could finally get those 32-bit i386 library builds again.&lt;/p&gt;&#xA;" OwnerUserId="22433" LastActivityDate="2020-06-06T11:25:43.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24822" PostTypeId="2" ParentId="2644" CreationDate="2020-06-06T16:52:21.143" Score="0" Body="&lt;p&gt;I solved the issue with&#xA;&lt;code&gt;sudo apt remove elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23143" LastEditorUserId="16827" LastEditDate="2020-06-18T13:43:49.827" LastActivityDate="2020-06-18T13:43:49.827" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24823" PostTypeId="2" ParentId="22726" CreationDate="2020-06-06T16:59:25.687" Score="1" Body="&lt;p&gt;I solved the issue with &lt;code&gt;sudo apt remove elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23143" LastEditorUserId="16827" LastEditDate="2020-06-18T12:54:13.580" LastActivityDate="2020-06-18T12:54:13.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24824" PostTypeId="1" CreationDate="2020-06-07T00:22:16.557" Score="0" ViewCount="88" Body="&lt;p&gt;updated to Hera and consistently get this error code for every attempted install via app center.  What is the solution for this issue?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;E: The repository '&lt;a href=&quot;http://packages.elementary.io/appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter&lt;/a&gt; hera Release' does not have a Release file.&#xA;W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;W: See apt-secure(8) manpage for repository creation and user configuration details.&lt;/p&gt;&#xA;" OwnerUserId="23147" LastActivityDate="2020-06-07T03:19:10.667" Title="Can't install apps via app center" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ClosedDate="2020-07-03T04:37:14.367" ContentLicense="CC BY-SA 4.0" />
  <row Id="24825" PostTypeId="2" ParentId="24824" CreationDate="2020-06-07T03:19:10.667" Score="0" Body="&lt;p&gt;You need to change the sourcelist. Open the terminal and type;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano '/etc/apt/sources.list.d/appcenter.list'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;replace all the &lt;strong&gt;hera&lt;/strong&gt; with &lt;strong&gt;bionic&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save: [ctrl]+[o]&#xA;Exit: [ctrl]+[x]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You might as well check rest of your sourcelists;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano '/etc/apt/sources.list'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-07T03:19:10.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24826" PostTypeId="1" AcceptedAnswerId="24838" CreationDate="2020-06-07T16:54:47.707" Score="0" ViewCount="1769" Body="&lt;p&gt;Last 3 months i continuously using the elementary OS (elementary OS 5.1.5 Hera - with dual boot) for personal use. This is my first linux OS of my PC, and I am not using a linux version like before. I am facing alot of OS stability issues in this time. One the main issue on detecting the network adapeters.&#xA;I have two network interfaces, one wired LAN and another is wireless adapter. I have a strange issue when i try to enable the wired lan i got a message like below message.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6CsYe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6CsYe.jpg&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I already googled many hours and find out some instructions for editing the network configuration and restart the network manager service many times. but no use. I am really disappointed about the stability of elementary os. Any advice much appreciated.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="17743" LastActivityDate="2020-06-08T19:17:29.010" Title="Error editing connection - Did not find a connection with UUID" Tags="|settings|system|networking|elementary-project|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24829" PostTypeId="2" ParentId="21990" CreationDate="2020-06-08T00:31:14.007" Score="0" Body="&lt;p&gt;I had a similar problem with my installation. &#xA;What worked was to disable the 'Secure Boot' option in bootloader settings.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I don't remember now how I did that but that's what helped for sure.&lt;/p&gt;&#xA;" OwnerUserId="23153" LastActivityDate="2020-06-08T00:31:14.007" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24833" PostTypeId="1" AcceptedAnswerId="24850" CreationDate="2020-06-08T11:21:08.253" Score="1" ViewCount="103" Body="&lt;p&gt;Recently the New... menu has overflown with useless options for new files, such as .bashrc, .Xauthority, or .steampath&lt;br&gt;&#xA;Any suggestions for how to clear it out?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rbOjv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rbOjv.png&quot; alt=&quot;right-click&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Here's my ~/Templates directory, there's no hidden files &#xA;&lt;a href=&quot;https://i.stack.imgur.com/i4j14.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/i4j14.png&quot; alt=&quot;~/templates&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="120" LastEditorUserId="120" LastEditDate="2020-06-08T12:04:21.463" LastActivityDate="2020-11-24T22:22:32.880" Title="Right-click &gt; New menu is overflowing with unnecessary options" Tags="|pantheon-files|" AnswerCount="2" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="24834" PostTypeId="2" ParentId="24724" CreationDate="2020-06-08T16:06:51.460" Score="0" Body="&lt;p&gt;&lt;a href=&quot;http://forum.notebookreview.com/threads/np900x3c-a02us-brightness-function-keys-not-working-w10.806219/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://forum.notebookreview.com/threads/np900x3c-a02us-brightness-function-keys-not-working-w10.806219/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have found this and it looks like this is the Samsung fault. I am not sure, however it seems there is no firmware nor software which could set properly functional keys binding. Unfortunately I am not an expert. Mostly people are complaining about this in Microsoft environment. So I think in Linux case it will be even worse. Probably you can try solutions from this thread: &lt;a href=&quot;https://askubuntu.com/questions/172613/samsung-new-series-9-not-all-function-keys-working&quot;&gt;https://askubuntu.com/questions/172613/samsung-new-series-9-not-all-function-keys-working&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-08T16:06:51.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24836" PostTypeId="1" CreationDate="2020-06-08T16:37:41.813" Score="0" ViewCount="469" Body="&lt;p&gt;Processor: Intel Atom x5-Z8350 CPU @ 1.44GHz&#xA;Memory: 2GB of DDR3&#xA;Graphics: CPU Integrated &#xA;Tablet Model Number: RCA W101SA23T1&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I need the driver for the Intel SST Audio Device (WDM) and the Realtek I2S Audio Codec But I don't know where to get them, I found a guide made for Ubuntu but to no avail (which doesn't make sense because Elementary OS is based off Ubuntu.) Does anyone know where to get the drivers?&lt;/p&gt;&#xA;" OwnerUserId="23154" LastActivityDate="2024-02-19T03:09:26.220" Title="I need a driver but i dont know where to get the one i need" Tags="|release-hera|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24837" PostTypeId="2" ParentId="24836" CreationDate="2020-06-08T18:44:28.817" Score="0" Body="&lt;p&gt;Actually Elementary is based on Ubuntu and Debian, so you are wrong. Install dkms in terminal&#xA;sudo apt install dkms&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Install deb from 18.04 or 19. 04 using Eddy. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+packages&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://code.launchpad.net/~ubuntu-audio-dev/+archive/ubuntu/alsa-daily/+packages&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally I am not sure is it a driver for your Realtek, but it works with really old kernel. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.realtek.com/en/component/zoo/category/pc-audio-codecs-high-definition-audio-codecs-software&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.realtek.com/en/component/zoo/category/pc-audio-codecs-high-definition-audio-codecs-software&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally you can check the solution from Mint forum which should also work.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://community.linuxmint.com/tutorial/view/1236&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://community.linuxmint.com/tutorial/view/1236&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-08T19:09:42.570" LastActivityDate="2020-06-08T19:09:42.570" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24838" PostTypeId="2" ParentId="24826" CreationDate="2020-06-08T19:17:29.010" Score="1" Body="&lt;p&gt;Open terminal and type&#xA;sudo nmtui. You should be able to manage networks there. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-08T19:17:29.010" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24840" PostTypeId="1" CreationDate="2020-06-09T06:04:19.823" Score="1" ViewCount="1777" Body="&lt;p&gt;I bought &lt;strong&gt;Lenovo IdeaPad-5-15IIL05&lt;/strong&gt;, installed &lt;strong&gt;elementary OS 5.1.5 Hera&lt;/strong&gt;:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;No sound (no sound output device).&lt;/li&gt;&#xA;&lt;li&gt;The touchpad does not work.&lt;/li&gt;&#xA;&lt;li&gt;The brightness adjustment through FN does not work.&lt;/li&gt;&#xA;&lt;li&gt;alsamixer does not open, writes no directory&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;Please help with the solution of this issue.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Changed the core of i8042.reset quiet splash (sudo nano / etc / default / grub) - &lt;strong&gt;the result does not work.&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Sound card:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Multimedia audio controller: Intel Corporation Device 34c8 (rev 30)&#xA;Subsystem: Lenovo Device 3841&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Touchpad not showing&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ lspci&#xA;00: 00.0 Host bridge: Intel Corporation Device 8a12 (rev 03)&#xA;00: 02.0 VGA compatible controller: Intel Corporation Device 8a56 (rev 07)&#xA;00: 04.0 Signal processing controller: Intel Corporation Device 8a03 (rev 03)&#xA;00: 0d.0 USB controller: Intel Corporation Device 8a13 (rev 03)&#xA;00: 14.0 USB controller: Intel Corporation Ice Lake-LP USB 3.1 xHCI Host Controller (rev 30)&#xA;00: 14.2 RAM memory: Intel Corporation Device 34ef (rev 30)&#xA;00: 14.3 Network controller: Intel Corporation Device 34f0 (rev 30)&#xA;00: 15.0 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP Serial IO I2C Controller # 0 (rev 30)&#xA;00: 15.1 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP Serial IO I2C Controller # 1 (rev 30)&#xA;00: 16.0 Communication controller: Intel Corporation Device 34e0 (rev 30)&#xA;00: 17.0 SATA controller: Intel Corporation Ice Lake-LP SATA Controller [AHCI mode] (rev 30)&#xA;00: 1d.0 PCI bridge: Intel Corporation Device 34b4 (rev 30)&#xA;00: 1f.0 ISA bridge: Intel Corporation Ice Lake-LP LPC Controller (rev 30)&#xA;00: 1f. 3 Multimedia audio controller: Intel Corporation Device 34c8 (rev 30)&#xA;00: 1f. 4 SMBus: Intel Corporation Ice Lake-LP SMBus Controller (rev 30)&#xA;00: 1f.5 Serial bus controller [0c80]: Intel Corporation Ice Lake-LP SPI Controller (rev 30)&#xA;01: 00.0 Non-Volatile memory controller: Device 1e0f: 0001&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23168" LastEditorUserId="15904" LastEditDate="2020-06-13T17:43:49.953" LastActivityDate="2020-08-11T01:04:54.050" Title="Lenovo IdeaPad-5-15IIL05 there is no sound, the touchpad does not work, the brightness adjustment does not work through FN" Tags="|release-hera|sound|touchpad|lenovo|" AnswerCount="6" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24842" PostTypeId="1" CreationDate="2020-06-09T06:53:23.217" Score="0" ViewCount="222" Body="&lt;p&gt;I have an Ubuntu VM and I want to set it up with elementary OS daily, but the packages inside are throwing dependency errors for packages inside the ppa (!) and I also can't find the package &lt;code&gt;libhandy-1-0&lt;/code&gt; that is requested by pantheon terminal and switchboard. How can I install it all?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yECKI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yECKI.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13261" LastActivityDate="2024-02-19T22:01:45.233" Title="How to set up elementary os daily?" Tags="|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24843" PostTypeId="1" CreationDate="2020-06-09T09:01:00.277" Score="1" ViewCount="253" Body="&lt;p&gt;pantheon mail is not working with only my yahoo account although it was working before but for some reason after i made &lt;code&gt;apt update&lt;/code&gt; this mail only stopped working.  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried to make SMTP &amp;amp; IMAP settings manually as described &lt;a href=&quot;https://help.yahoo.com/kb/sln4075.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;from yahoo site themselves&lt;/a&gt; but to no avail.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;this issue is more described in this &lt;a href=&quot;https://github.com/elementary/mail/issues/466&quot; rel=&quot;nofollow noreferrer&quot;&gt;github opened issue&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have Thunderbird email and it did not face any issues that pantheon was facing.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2024-02-21T04:04:35.563" Title="pantheon email &quot;connection error unable to validate&quot;" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24844" PostTypeId="2" ParentId="24842" CreationDate="2020-06-09T11:14:27.483" Score="0" Body="&lt;p&gt;There is also the &lt;a href=&quot;https://launchpad.net/~elementary-os/+archive/ubuntu/os-patches&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary os-patches PPA&lt;/a&gt; that likely contains some of the required packages. However, a lot of elementary packages in daily have now dropped support for elementary OS 5.x (bionic/hera) as we're working towards the release of elementary OS 6.0.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So you may find that this still won't work due to dependencies that simply aren't available in elementary OS 5.x.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-09T11:14:27.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24845" PostTypeId="2" ParentId="19596" CreationDate="2020-06-09T11:45:28.490" Score="1" Body="&lt;p&gt;When you compile a Vala application using meson/ninja, it automatically adds the correct flags to make it build using debug information, so you can skip straight to debugging the application.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-09T11:45:28.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24846" PostTypeId="2" ParentId="16145" CreationDate="2020-06-09T11:52:44.233" Score="0" Body="&lt;p&gt;&lt;code&gt;Granite.Services.Paths&lt;/code&gt; is now deprecated and uses &lt;code&gt;GLib.Environment.get_home_dir ()&lt;/code&gt; internally anyway.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If &lt;code&gt;GLib.Environment.get_home_dir ()&lt;/code&gt; is returning &lt;code&gt;null&lt;/code&gt;, I believe there is probably something wrong with your setup/install as this method works on my system.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I believe it uses the &lt;code&gt;HOME&lt;/code&gt; environment variable, so check this is set and isn't being overwritten by something else.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-09T11:52:44.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24849" PostTypeId="2" ParentId="18445" CreationDate="2020-06-09T12:58:01.030" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo cp /home/user/Downloads/iwlwifi-7265-14.ucode /lib/firmware/ &amp;amp;&amp;amp; sudo cp /home/user/Downloads/iwlwifi-7265D-14.ucode /lib/firmware/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-10T18:55:22.460" LastActivityDate="2020-06-10T18:55:22.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24850" PostTypeId="2" ParentId="24833" CreationDate="2020-06-09T13:11:59.977" Score="3" Body="&lt;p&gt;The &quot;New&quot; list in the right-click menu draws from &lt;code&gt;XDG_TEMPLATES_DIR&lt;/code&gt; in &lt;code&gt;.config/user-dirs.dirs&lt;/code&gt;.&lt;br&gt;&#xA;Running the command &lt;code&gt;tail ~/.config/user-dirs.dirs&lt;/code&gt; showed that XDG_TEMPLATES_DIR was set as &lt;code&gt;$HOME&lt;/code&gt; and hence was trying to use all the various dotfiles in the home directory as templates. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Amending the file so it says &lt;code&gt;XDG_TEMPLATES_DIR=&quot;$HOME/Templates&quot;&lt;/code&gt; followed by a restart fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="120" LastActivityDate="2020-06-09T13:11:59.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24851" PostTypeId="1" CreationDate="2020-06-09T16:02:20.883" Score="0" ViewCount="125" Body="&lt;p&gt;I've used other Linux distros on my Thinkpad but non had this overheating problem when I using it. I've W10 on my machine too, but it's always cool. I've just installed &lt;strong&gt;tlp&lt;/strong&gt;, and even &lt;strong&gt;tp_smapi&lt;/strong&gt; (even it doesn't include L-series). Has anyone encountered the same problem with a Thinkpad? Any help is greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23172" LastActivityDate="2024-02-24T18:05:55.777" Title="Thinkpad L590 overheating problem!" Tags="|lenovo|thinkpad|overheat|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24852" PostTypeId="2" ParentId="24324" CreationDate="2020-06-09T16:02:51.427" Score="0" Body="&lt;p&gt;Problems solved with installation of &lt;code&gt;im-config&lt;/code&gt; and setting &lt;code&gt;ibus&lt;/code&gt; method. ありがとう！&lt;/p&gt;&#xA;" OwnerUserId="22676" LastActivityDate="2020-06-09T16:02:51.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24853" PostTypeId="1" CreationDate="2020-06-09T17:06:12.810" Score="1" ViewCount="18" Body="&lt;p&gt;Running Elementary OS on HP Compaq Pro 4300.  Intel chips, 4gig memory, etc.. . It took some time to find the best version on VMware for Ubuntu 18.04 which is VMware version 4.10. Our client has updated the host environment and now we need to update the client.  Every version I try from 5.0 onward will connect, but does not provide video, and usually then disconnects and crashes the app.  We are using this for productions so any suggestions for a fix to allow upgrading VMware would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23173" LastActivityDate="2021-07-05T08:03:45.347" Title="Why cant I update VMware past version 4.10 without losing the video from the remote system?" Tags="|updates|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24854" PostTypeId="1" CreationDate="2020-06-10T05:05:43.493" Score="0" ViewCount="527" Body="&lt;p&gt;I'm trying to install and use ulauncher, and I had set Super + Space as the shortcut. But when I press the shortcut, ulauncher doesn't gain focus as in I'm not able to enter anything into the input box unless and until I click on it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;And when I set &lt;code&gt;gsettings set org.gnome.desktop.wm.preferences focus-mode 'sloppy'&lt;/code&gt;, it still requires me to hover on the input box to start searching for applications.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;It would be of great help if someone can help me with this. I basically want to search for apps as soon as I press &lt;code&gt;Super + Space&lt;/code&gt; after it opens up ulauncher.&lt;/p&gt;&#xA;" OwnerUserId="19705" LastActivityDate="2024-01-22T02:02:55.440" Title="ulauncher not gaining focus" Tags="|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24857" PostTypeId="1" CreationDate="2020-06-10T13:46:58.763" Score="1" ViewCount="119" Body="&lt;p&gt;So I cant reach the login screen. When i boot in the system the elementary os icon shows up, it glows for a while than it completely freezes. When i pressed escape before it froze it was going through the services list then login shows up in the terminal for about 2 seconds then the screen completely clears theres just an underscore blinking in the top left of the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When i looked at the boot.log there was no errors like i saw after pressing escape.BTW i can boot up with from the advanced settings with the other ones except the top one.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23175" LastEditorUserId="15904" LastEditDate="2020-06-11T18:08:21.030" LastActivityDate="2024-02-22T04:07:41.067" Title="Elementary os 5.1 hera stuck at boot" Tags="|release-hera|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24858" PostTypeId="2" ParentId="22080" CreationDate="2020-06-10T14:25:41.093" Score="0" Body="&lt;p&gt;It can be a firmware issue. I have had similar issue. I have i915 socket for my GPU. All I did was to download firmware for this socket and compile with the kernel above 5.5 where the issue has been solved. Command lscpi can show the hardware. When you want to perform sudo update-initramfs for current kernel it shows what firmware is missing. Both methods are good to check do you need a firmware. If you need a tutorial check here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18501/unbelievably-slow&quot;&gt;Unbelievably slow?&lt;/a&gt;. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-10T18:31:30.890" LastActivityDate="2020-06-10T18:31:30.890" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24859" PostTypeId="2" ParentId="21586" CreationDate="2020-06-10T17:14:19.663" Score="0" Body="&lt;p&gt;I have used youtube-dl cli and jdownloader and both works great&lt;/p&gt;&#xA;" OwnerUserId="22754" LastActivityDate="2020-06-10T17:14:19.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24860" PostTypeId="2" ParentId="18501" CreationDate="2020-06-10T17:26:53.647" Score="1" Body="&lt;p&gt;Open terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lscpi.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;You probably did not install the firmware for the GPU socket and did not compiled it with the kernel above 5.5 where the issue has been solved. If you need a tutorial, let me know. I already did it and it does not freeze. By the way Elementary OS does not use prefetch directory like Windows. It does not have the fast boot solution like Windows, so do not even compare totally different systems with totally different file system and without knowledge about systemd. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anyway the example solution which solved issue in my case:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How to upgrade Elementary OS to the newest kernel. Only for braves. &lt;/p&gt;&#xA;&#xA;Install necessary packages&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential libncurses-dev bison flex libssl-dev libelf-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;To check hardware ####&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;to check missing firmware&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Make directories for firmware&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir /home/username/Downloads/kernel&#xA;mkdir /home/username/Downloads/amdgpu&#xA;mkdir /home/username/Downloads/i915&#xA;mkdir /home/username/Downloads/rtl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;to get rid of missing firmware errors for amdgpu&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/amdgpu&#xA;wget https://github.com/M-Bab/linux-kernel-amdgpu-binaries/files/4124959/firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;unzip firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;sudo dpkg -i firmware-radeon-ucode-rock_2.110_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or use eddy to install this deb&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My comment: I was brave enough.&lt;/p&gt;&#xA;&#xA;to get rid of missing firmware errors for i915&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/i915&#xA;git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git&#xA;sudo cp -R /linux-firmware/i915/* /lib/firmware/i915/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;to get rid of missing firmware errors for rtl (Realtek LAN and Wi-Fi adapters in my DELL)&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/rtl&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8168fp-3.fw&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8125a-3.fw&#xA;sudo cp rtl8168fp-3.fw /lib/firmware/rtl_nic &#xA;sudo cp rtl8125a-3.fw /lib/firmware/rtl_nic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Download kernel 5.7.0&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/kernel&#xA;wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.7.tar.xz&#xA;tar -xf linux-5.7.tar.xz&#xA;cd linux-5.7&#xA;cp -v /boot/config-$(uname -r) .config&#xA;make menuconfig &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;save config and then exit.&lt;/p&gt;&#xA;&#xA;use 4 core/thread - if your processor have 4 cores&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make -j 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;or use 8 core/thread - if your processor have 8 cores&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make -j 8&#xA;&#xA;sudo make modules_install &#xA;sudo make install &#xA;sudo update-initramfs -c -k 5.7.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;ignore these errors below, just because those three bin files are not made yet&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Possible missing firmware /lib/firmware/amdgpu/navi12_ta.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_dmcu.bin for module amdgpu&#xA;&#xA;sudo update-grub&#xA;sudo reboot&#xA;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;to check errors after reboot:&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -b&#xA;sudo dmesg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;source: &lt;a href=&quot;https://www.cyberciti.biz/tips/compiling-linux-kernel-26.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cyberciti.biz/tips/compiling-linux-kernel-26.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-10T18:29:36.313" LastActivityDate="2020-06-10T18:29:36.313" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24861" PostTypeId="2" ParentId="24857" CreationDate="2020-06-10T18:36:44.747" Score="0" Body="&lt;p&gt;You can log into the other kernel and then try to remove quiet splash from /etc/default/grub file this way:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Press ins (insert) button on your keyboard to edit, remove quiet splash.&#xA;Then press Esc button and type&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;:x&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;It will save the change and exit the editor.&#xA;Then type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To restart the machine and you will see what is going on during the boot.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Let me know what you will see on the screen. Then we can proceed with the further troubleshooting like chroot or checking logs via journalctl -b or dmesg.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-10T18:36:44.747" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="24862" PostTypeId="2" ParentId="24462" CreationDate="2020-06-10T18:41:00.057" Score="1" Body="&lt;p&gt;Yes, there is. Here is the tutorial:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://eos-techs.com/2020/06/05/howto-add-zoom-effect-on-plank/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://eos-techs.com/2020/06/05/howto-add-zoom-effect-on-plank/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-10T18:41:00.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24863" PostTypeId="2" ParentId="24854" CreationDate="2020-06-10T18:49:10.597" Score="0" Body="&lt;p&gt;Answers from here: &lt;a href=&quot;https://github.com/Ulauncher/Ulauncher/issues/222&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Ulauncher/Ulauncher/issues/222&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;molguin92 commented on Jul 5, 2018 •&lt;/p&gt;&#xA;&lt;p&gt;Hi! Sorry for necroing this thread, but I found a workaround to this issue.&lt;/p&gt;&#xA;&lt;p&gt;The problem lies with the /org/gnome/mutter/overlay-key dconf key, which determines the key bound to launch the overview in Gnome Shell and is set to Super_L by default. This is in addition to the default binding of Super+S set in the Keyboard Shortcut settings.&#xA;Changing this key to something else (I set it to the right Super key, Super_R) allows the use of the left Super key for launching ULauncher. I've done this for some time now without any adverse effects, and I can still access Gnome Shell's overview through the use of Super + S.&lt;/p&gt;&#xA;&lt;p&gt;@gabrieldrs&#xA;gabrieldrs commented on Oct 3, 2019&lt;/p&gt;&#xA;&lt;p&gt;Hey, sorry again for bringing this up, but this is one of the first results on google about this issue and @molguin92 solution is not applicable to Ubuntu 19.04.&lt;/p&gt;&#xA;&lt;p&gt;In order to change the shortcut now you have to install gnome-tweak-tool. Inside it, go to Keyboard &amp;amp; Mouse and there's an option to change the Overview Shortcut to the Right Super.&lt;/p&gt;&#xA;&lt;p&gt;This indeed fixes the Super + space shortcut problem with ulauncher in gnome.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="-1" LastEditDate="2020-06-17T09:52:44.807" LastActivityDate="2020-06-10T18:49:10.597" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24864" PostTypeId="2" ParentId="24851" CreationDate="2020-06-10T18:54:30.877" Score="0" Body="&lt;p&gt;You can try the solution I provided here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24223/indicators-on-wingpanel/24245?noredirect=1#comment25568_24245&quot;&gt;indicators on wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;However I cannot guarantee it will solve your issue. But we can try to figure it out, what causes the issue. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-10T18:54:30.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24865" PostTypeId="1" CreationDate="2020-06-10T19:05:48.297" Score="0" ViewCount="52" Body="&lt;p&gt;Whatever shortcut I choose in system settings to switch between keyboard languages, it won't work. Tried all available combination - Alt+Shift, Ctrl+Alt, Alt+Space, etc.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What could cause this? I've already reinstalled elementaryOS - didn't help. I suspect something is wrong with my user configuration, but I don't know what. I don't want to reset all settings.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=5.1.5&#xA;DISTRIB_CODENAME=hera&#xA;DISTRIB_DESCRIPTION=&quot;elementary OS 5.1.5 Hera&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;What can cause this issue? Is there a way to debug this maybe?&lt;/p&gt;&#xA;" OwnerUserId="18224" LastActivityDate="2024-02-21T05:01:20.107" Title="Can't switch between keyboard layouts via shortcuts - none of them work" Tags="|keyboard-shortcuts|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24866" PostTypeId="2" ParentId="24843" CreationDate="2020-06-10T19:08:52.607" Score="0" Body="&lt;p&gt;You can try this solution: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14622/pantheon-mail-wont-archive-gmail&quot;&gt;Pantheon-mail won&amp;#39;t archive Gmail&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I did not test it. Just try to change the service name to Yahoo. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;I do not use this mail app and removed it completely. I can recommend Thunderbird or Evolution.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-10T19:08:52.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24867" PostTypeId="2" ParentId="24865" CreationDate="2020-06-10T19:18:59.613" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ySGLW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ySGLW.png&quot; alt=&quot;Keyboard settings&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;For me it is working. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Next time, don't reinstall anything, just delete the ~/.Xauthority file, it will be recreated automatically next time you log in:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm ~/.Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Then log in normally. Let me know did it solve the issue.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Other solutions are here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1128/how-can-i-switch-between-keyboard-layouts-with-a-keyboard-shortcut-in-freya&quot;&gt;How can I switch between keyboard layouts with a keyboard shortcut in Freya?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-10T19:33:45.627" LastActivityDate="2020-06-10T19:33:45.627" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24868" PostTypeId="2" ParentId="24808" CreationDate="2020-06-10T20:05:41.350" Score="0" Body="&lt;p&gt;I have the same problem, and it appears also into Ubuntu 18.04 Geary. Yesterday I did upgrade of Ubuntu into 20.04 and Yahoo started to work again with Geary withous any modifications. It looks like Yahoo! ignores the older versions of the mail app, which is the present one of Geary(so called Pantheon Mail) into elementary OS Hera.... &lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-06-10T20:05:41.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24869" PostTypeId="1" CreationDate="2020-06-11T02:46:15.757" Score="0" ViewCount="246" Body="&lt;p&gt;When I boot up everything is fine until I get to userware, then screen looks funny/not smooth and keyboard and mouse stop working, only a hard reset gets me out.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;When I checked on next bootup, I saw something about ... not a bionic kernel ... so back at grub menu I found that it was booting up with a kernel from another OS in my system. AntiX OS'es kernel. How the hell did that happen. My current kernel is 5.3.0-53-generic and 51, but somehow it was booting up with 4.9.212-antix.1-amd64-smp and 4.9.221-antix.1-amd64-smp and two others of that variety. I am really buffled. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is how can I force kernel update or reinstall using chroot in a live session so that it can update itself in grub? And once im in how to remove the above mentioned references from its config?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have several OSes in my system but this is just nuts.&lt;/p&gt;&#xA;" OwnerUserId="23177" LastActivityDate="2024-02-24T15:07:25.893" Title="How to change kernel for a non booting OS" Tags="|boot|grub|kernel|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24870" PostTypeId="1" CreationDate="2020-06-11T06:52:01.913" Score="0" ViewCount="320" Body="&lt;p&gt;Folks;&#xA;using current elementary, I stumbled across some rather weird behaviour related to the default music player. As &quot;Music&quot; doesn't work for some of my use cases, I tried other players (such as byte from the App Store or lollypop from flatpak).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Generally, this seems to work. However, in the system tray in the &quot;Volume&quot; menu, I will keep seeing &quot;Music&quot; icon and navigation buttons on top of the menu &lt;em&gt;most of the time&lt;/em&gt;. I remember having seen lollypop in there once after starting the laptop in the morning but I have no idea how to make lollypop / whatever-default-music-player permanently appear in there... Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Kristian&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2024-02-25T18:07:40.947" Title="Default music player in system tray icon?" Tags="|release-hera|settings|desktop|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24871" PostTypeId="1" CreationDate="2020-06-11T07:36:03.020" Score="0" ViewCount="272" Body="&lt;p&gt;Folks; I'm using NextCloud client in elementary, all along with the NextCloud desktop sync app. I am &lt;em&gt;sure&lt;/em&gt; I have seen a NextCloud icon in elementary file manager on the left side (just below Network) once or twice, but at the moment it's gone and I have no idea how to make it come back there... Any ideas?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks,&#xA;Kristian&lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2024-03-26T02:04:30.633" Title="nextcloud in elementary file manager?" Tags="|release-hera|pantheon-files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24873" PostTypeId="1" AcceptedAnswerId="24876" CreationDate="2020-06-11T10:58:06.590" Score="0" ViewCount="308" Body="&lt;p&gt;My super key swapped randomly with the alt key.&#xA;For example, when I click super key nothing happens, but when I click alt, the shortcuts help pops up.To close a window I need to click super+f4. In keyboard settings, everything is configured correctly.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I've tried to add &lt;code&gt;setxbkmap -option altwin:swap_alt_win&lt;/code&gt; to startup, and it works until i change windows with alt+tab. Can anyone help? It is very annoying.&lt;/p&gt;&#xA;" OwnerUserId="23180" LastActivityDate="2021-12-19T14:53:42.633" Title="Super key swapped with alt key" Tags="|keyboard-shortcuts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24874" PostTypeId="1" AcceptedAnswerId="24877" CreationDate="2020-06-11T11:16:45.697" Score="2" ViewCount="4616" Body="&lt;p&gt;I installed elementary tweaks and enabled the dark mode toggle but the dark theme isn't applied to system settings app, although it works on other apps like files&#xA;Using 5.1.5 Hera&lt;/p&gt;&#xA;" OwnerUserId="23181" LastActivityDate="2020-08-31T15:23:03.087" Title="Dark theme not working in system settings" Tags="|release-hera|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24876" PostTypeId="2" ParentId="24873" CreationDate="2020-06-11T13:08:54.413" Score="2" Body="&lt;p&gt;You can try this&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -option altwin:swap_lalt_lwin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;See the difference? lalt = left alt, ralt = right alt. The same with lwin and rwin. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To restore default&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -option&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-11T13:08:54.413" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24877" PostTypeId="2" ParentId="24874" CreationDate="2020-06-11T17:53:41.153" Score="0" Body="&lt;p&gt;From eOS Reddit:&#xA;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;replace the file at /usr/share/dbus-1/interfaces/io.elementary.pantheon.AccountsService.xml with the contents of&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18318" LastEditorUserId="18318" LastEditDate="2020-06-28T14:35:12.133" LastActivityDate="2020-06-28T14:35:12.133" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24878" PostTypeId="1" CreationDate="2020-06-11T18:01:48.833" Score="0" ViewCount="84" Body="&lt;p&gt;I installed elementary a couple of weeks ago, and I noticed that when I clicked on shutdown in the menu, the screen would turn black, the system wouldn't respond and I would have to press the power button for the machine to be turned off.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;After some digging I got into &lt;a href=&quot;https://freedesktop.org/wiki/Software/systemd/Debugging/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this site&lt;/a&gt; for systemd debugging, tried everything and nothing really happend so it may be a Kernel bug.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;How can I troubleshoot this? Some more digging got me thinking it could be my hardware drivers on the kernel, is there anyway to solve this? I'll post my hardware if it's any help.&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Ryzen 3 3200g&lt;/li&gt;&#xA;&lt;li&gt;Msi b450m pro-m2 max&lt;/li&gt;&#xA;&lt;li&gt;2x8gb T-Force 3200mhz ram&lt;/li&gt;&#xA;&lt;li&gt;480gb WD SSD&lt;/li&gt;&#xA;&lt;li&gt;Evga 500w&lt;/li&gt;&#xA;&lt;li&gt;Grub dualboot Windows10&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="23183" LastActivityDate="2024-02-24T17:07:11.023" Title="Hera won't shutdown" Tags="|release-hera|kernel|shutdown|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24879" PostTypeId="2" ParentId="24871" CreationDate="2020-06-11T18:31:38.400" Score="0" Body="&lt;p&gt;Hmm ok. Thanks. It seems after re-installing the NextCloud client and linking it to my configuration again, now it's there in Files. Strange. But at least it's working. Thanks! :) &lt;/p&gt;&#xA;" OwnerUserId="15422" LastActivityDate="2020-06-11T18:31:38.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24880" PostTypeId="1" CreationDate="2020-06-11T20:20:22.913" Score="0" ViewCount="308" Body="&lt;p&gt;I have a new install of Elem OS . Now want to add my HP laser jet pro M102w wireless printer .  &lt;/p&gt;&#xA;&#xA;&lt;p&gt;When asked to select the printer from the list my printer did not appear. which driver will be compatible?  Is there some setting with the wireless connection that I should check?&lt;/p&gt;&#xA;" OwnerUserId="23184" LastActivityDate="2024-02-24T13:09:16.163" Title="install wireless HP laserjet Pro M102w" Tags="|printer|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24881" PostTypeId="2" ParentId="9283" CreationDate="2020-06-11T22:47:35.833" Score="0" Body="&lt;p&gt;Not free, but based on Ardour is Mixbus by Harrison (standard or 32c). Not sure about Ardour, but Mixbus does a system check and configuration for you automatically on install. All you need to do is install the -lowlatency kernel if you require additional low latency performance/reliability. Not needed for printing VIs but IMO necessary for audio recording. Jackd is not required, as Ardour/Mixbus can grab hold of the sound card directly via ALSA. You only really need Jack if you plan on multiplexing audio from various sound sources. If you are OK with the DAW monopolizing the sound card temporarily and don't need to connect and route audio between various software, then don't worry about it too much. Monolithic DAWs such as Ardour and Mixbus and Reaper can handle everything internally, which makes jackd somewhat superfluous.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Mixbus provides a bunch of great plugins that are pretty cost-effective, and you can also check out the EQ10Q and Calf Studio Plugins packs, for example, for some really nice free options.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Biggest issues with configuration:&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Set CPU governor to &quot;performance&quot; or otherwise disable frequency&#xA;scaling&lt;/li&gt;&#xA;&lt;li&gt;Disable or pause background processes that may hog precious CPU cycles (indexers, performance monitors, fancy graphics, system&#xA;updates, email/IM feeds, networking, etc)&lt;/li&gt;&#xA;&lt;li&gt;Use a lowlatency kernel with RTIRQ (the RTIRQ version in the repositories may be very outdated, I think .debian repos still have a version from 2015!)&lt;/li&gt;&#xA;&lt;li&gt;Add your user to the @audio group&lt;/li&gt;&#xA;&lt;li&gt;Configure your /etc/limits.conf file for realtime audio&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;You can google these things to find more detailed discussion about them.&lt;/p&gt;&#xA;" OwnerUserId="23095" LastEditorUserId="23095" LastEditDate="2020-06-12T02:04:24.750" LastActivityDate="2020-06-12T02:04:24.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24882" PostTypeId="1" AcceptedAnswerId="24888" CreationDate="2020-06-11T22:54:59.867" Score="1" ViewCount="367" Body="&lt;p&gt;I love Elementary OS and Pantheon, I am just wondering if I can &quot;prune the fat&quot; during the install so I can just focus on adding the packages I actually require and use, rather than having to remove packages after the install.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This is specifically to test Elementary as a platform for digital audio production, to see if the OS is sufficiently &quot;idle&quot; to allow greater low latency performance over Gnome. Gnome is horrible, a very busy DE with lots of deeply-embedded and moving parts and intractable bloat.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I like the basic beauty and UI of Pantheon but am looking to carefully vet background processes.&lt;/p&gt;&#xA;" OwnerUserId="23095" LastActivityDate="2020-06-12T12:27:42.417" Title="Does ElementaryOS have a 'minimal install' option like Ubuntu?" Tags="|pantheon|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24888" PostTypeId="2" ParentId="24882" CreationDate="2020-06-12T12:27:42.417" Score="0" Body="&lt;p&gt;elementary does not have a minimal install option due to the fact it is pretty light in the first place.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The minimal option in Ubuntu removes things like LibreOffice, Transmission, etc... that can get pretty large and not all users want. As far as I know, it's mainly for saving disk space, and probably doesn't offer much if anything in terms of performance gains.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;There are only a couple of pre-installed applications in elementary that run in the background (and hence possibly have an impact on performance). These are namely AppCenter and Calendar. Keep in mind that if you remove the autostarts for those or remove them completely, you won't get software update notifcations or calendar notifications respectively.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Pretty much everything else starts and closes on demand so they'll only have an impact on system resources if you explicitly launch them and leave them running.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Anything else that's left running after that is pretty much a required component of the session. You could experiment with stripping things out a bit more, but it would be likely to cause issues.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Edit: Also worth adding that latency for audio production is more likely to be affected by kernel things like the scheduler and various drivers etc... than it is the applications that are running. I know Ubuntu provides low latency kernels in the repository but I have never experimented with them or know whether they work with elementary. Just bear in mind that unless you're using the exact same kernel in two different distros, it's probably not a fair comparison.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-12T12:27:42.417" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24889" PostTypeId="1" CreationDate="2020-06-12T13:42:50.687" Score="1" ViewCount="79" Body="&lt;p&gt;AppCenter were indicating for months that there was an update for &lt;strong&gt;ibus&lt;/strong&gt; and &lt;strong&gt;gir&lt;/strong&gt;. I never use the AppCenter so I continued to use my bash alias to update the system:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;alias upd8=&quot;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade -y &amp;amp;&amp;amp; sudo apt autoremove &amp;amp;&amp;amp; sudo apt autoclean&quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The command above NEVER installed the aforementioned updates, because there was some unmet depencencies or something like that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;But, one day I clicked in the system updates button in AppCenter and &lt;strong&gt;boom&lt;/strong&gt;.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Now I can't see sound settings (screenshot below).&#xA;&lt;a href=&quot;https://i.stack.imgur.com/L0IeP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L0IeP.png&quot; alt=&quot;system&amp;#39;s settings panel screenshot, but without showing sound settings icon &quot;&gt;&lt;/a&gt;&#xA;The sound card works, but I can only control its volume.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I checked &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12399/no-sound-setting-in-system-settings&quot;&gt;here&lt;/a&gt; and &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12399/no-sound-setting-in-system-settings&quot;&gt;here&lt;/a&gt; but no luck as you can see below.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;vinicius@vinicius-Aspire-E1-571:~$ sudo apt policy switchboard-plug-gcc-sound&#xA;switchboard-plug-gcc-sound:&#xA;  Instalado: (nenhum)&#xA;  Candidato: 0.2.0-0~77~ubuntu0.4.1&#xA;  Tabela de versão:&#xA;     0.2.0-0~77~ubuntu0.4.1 500&#xA;        500 http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial/main amd64 Packages&#xA;&#xA;vinicius@vinicius-Aspire-E1-571:~$ sudo apt install switchboard-plug-gcc-sound&#xA;Lendo listas de pacotes... Pronto&#xA;Construindo árvore de dependências       &#xA;Lendo informação de estado... Pronto&#xA;Alguns pacotes não puderam ser instalados. Isto pode significar que&#xA;você solicitou uma situação impossível ou, se você está usando a&#xA;distribuição instável, que alguns pacotes requeridos não foram&#xA;criados ainda ou foram retirados da &quot;Incoming&quot;.&#xA;A informação a seguir pode ajudar a resolver a situação:&#xA;Os pacotes a seguir têm dependências desencontradas:&#xA; switchboard-plug-gcc-sound : Depende: unity-control-center mas não será instalado&#xA;E: Impossível corrigir problemas, você manteve (hold) pacotes quebrados.&#xA;&#xA;vinicius@vinicius-Aspire-E1-571:~$ sudo apt install unity-control-center&#xA;Lendo listas de pacotes... Pronto&#xA;Construindo árvore de dependências       &#xA;Lendo informação de estado... Pronto&#xA;Alguns pacotes não puderam ser instalados. Isto pode significar que&#xA;você solicitou uma situação impossível ou, se você está usando a&#xA;distribuição instável, que alguns pacotes requeridos não foram&#xA;criados ainda ou foram retirados da &quot;Incoming&quot;.&#xA;A informação a seguir pode ajudar a resolver a situação:&#xA;&#xA;Os pacotes a seguir têm dependências desencontradas:&#xA; unity-control-center : Depende: ibus&#xA;                        Recomenda: ibus (&amp;gt;= 1.5.0)&#xA;E: Impossível corrigir problemas, você manteve (hold) pacotes quebrados.&#xA;&#xA;vinicius@vinicius-Aspire-E1-571:~$ sudo apt policy ibus&#xA;ibus:&#xA;  Instalado: (nenhum)&#xA;  Candidato: 1.5.11-1ubuntu2.4&#xA;  Tabela de versão:&#xA;     1.5.11-1ubuntu2.4 500&#xA;        500 http://br.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages&#xA;        500 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages&#xA;     1.5.11-1ubuntu2.3 0&#xA;        100 /var/lib/dpkg/status&#xA;     1.5.11-1ubuntu2 500&#xA;        500 http://br.archive.ubuntu.com/ubuntu xenial/main amd64 Packages&#xA;&#xA;vinicius@vinicius-Aspire-E1-571:~$ sudo apt install ibus&#xA;Lendo listas de pacotes... Pronto&#xA;Construindo árvore de dependências       &#xA;Lendo informação de estado... Pronto&#xA;Alguns pacotes não puderam ser instalados. Isto pode significar que&#xA;você solicitou uma situação impossível ou, se você está usando a&#xA;distribuição instável, que alguns pacotes requeridos não foram&#xA;criados ainda ou foram retirados da &quot;Incoming&quot;.&#xA;A informação a seguir pode ajudar a resolver a situação:&#xA;&#xA;Os pacotes a seguir têm dependências desencontradas:&#xA; ibus : Depende: dconf-cli mas não será instalado&#xA;        Depende: gir1.2-gtk-3.0 (&amp;gt;= 3.8.5) mas não será instalado&#xA;        Depende: gir1.2-ibus-1.0 (= 1.5.11-1ubuntu2.4) mas não será instalado&#xA;        Depende: adwaita-icon-theme mas não será instalado&#xA;        Depende: librsvg2-common mas não será instalado&#xA;        Depende: python3-gi mas não será instalado&#xA;        Depende: dconf-gsettings-backend mas não será instalado ou&#xA;                 gsettings-backend&#xA;        Depende: libatk1.0-0 (&amp;gt;= 1.12.4) mas não será instalado&#xA;        Depende: libdconf1 (&amp;gt;= 0.14.0) mas não será instalado&#xA;        Depende: libgdk-pixbuf2.0-0 (&amp;gt;= 2.22.0) mas não será instalado&#xA;        Depende: libgtk-3-0 (&amp;gt;= 3.9.10) mas não será instalado&#xA;        Depende: libibus-1.0-5 (&amp;gt;= 1.5.11-1ubuntu2.4) mas não será instalado&#xA;        Depende: libnotify4 (&amp;gt;= 0.7.0) mas não será instalado&#xA;        Depende: libpangocairo-1.0-0 (&amp;gt;= 1.14.0) mas não será instalado&#xA;        Quebra: libglib2.0-0 (&amp;lt; 2.48.2-0ubuntu4.5~) mas 2.48.2-0ubuntu4.1+elementary0.4.1 está para ser instalado&#xA;        Recomenda: ibus-gtk mas não será instalado ou&#xA;                   ibus-qt4 mas não será instalado ou&#xA;                   libqt5gui5 mas não será instalado&#xA;        Recomenda: ibus-gtk3 mas não será instalado ou&#xA;                   ibus-qt4 mas não será instalado ou&#xA;                   libqt5gui5 mas não será instalado&#xA;E: Impossível corrigir problemas, você manteve (hold) pacotes quebrados.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Tried &lt;a href=&quot;https://www.techbrown.com/fix-broken-packages-ubuntu-16-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this step-by-step&lt;/a&gt; to fix broken packages, but console doesn't show any broken packages.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;At the end of the day I'm without sound settings, ibus, gir and probably more stuff I didn't miss (yet). And I can't see a way to fix this besides a full backup and OS upgrade :-(&lt;/p&gt;&#xA;" OwnerUserId="23187" LastActivityDate="2020-12-17T05:27:24.220" Title="Can't see sound settings on Loki after upgrading from AppCenter" Tags="|sound|package-management|ibus|switchboard|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24891" PostTypeId="2" ParentId="21387" CreationDate="2020-06-12T18:24:24.423" Score="0" Body="&lt;p&gt;This is a known issue with the older version of Geary that Mail is based on.&#xA;The newer Geary has fixed this.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;References:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://gitlab.gnome.org/GNOME/geary/-/issues/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.gnome.org/GNOME/geary/-/issues/20&lt;/a&gt;&#xA;&lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=736640#c27&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/show_bug.cgi?id=736640#c27&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second link provides a temporary workaround.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;-Reed&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2020-06-12T18:24:24.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24892" PostTypeId="2" ParentId="24816" CreationDate="2020-06-13T06:15:46.857" Score="0" Body="&lt;p&gt;&lt;strong&gt;&lt;em&gt;ok i resolve this be my self, i read this document:&lt;/em&gt;&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://forums.developer.nvidia.com/t/cannot-purge-and-install-nvidia-driver/59422/4&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.developer.nvidia.com/t/cannot-purge-and-install-nvidia-driver/59422/4&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;i use this comand to remove all programns whith dependencies brokens (sorry for my english)&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --force-all -P [name of package with unmet dependency]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;then i use:&lt;/em&gt;&lt;/strong&gt; &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$sudo apt autoclean &amp;amp;&amp;amp; apt clean&#xA;&#xA;sudo apt update &amp;amp;&amp;amp; apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;the terminal throw this:&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get upgrade&#xA;Leyendo lista de paquetes... Hecho&#xA;Creando árbol de dependencias       &#xA;Leyendo la información de estado... Hecho&#xA;Tal vez quiera ejecutar «apt --fix-broken install» para corregirlo.&#xA;Los siguientes paquetes tienen dependencias incumplidas:&#xA; **libnvidia-ifr1-440** : Depende: libnvidia-gl-440 pero no está instalado&#xA;E: Dependencias incumplidas. Intente «apt --fix-broken install» sin paquetes (o especifique una solución).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;strong&gt;&lt;em&gt;i use this:&lt;/em&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$sudo dpkg --force-all -P libnvidia-ifr1-440&#xA;&#xA;sudo apt update &amp;amp;&amp;amp; apt upgrade&#xA;&#xA;Leyendo lista de paquetes... Hecho&#xA;Creando árbol de dependencias       &#xA;Leyendo la información de estado... Hecho&#xA;Calculando la actualización... Hecho&#xA;Los paquetes indicados a continuación se instalaron de forma automática y ya no son necesarios.&#xA;  gedit-common gedit-plugins-common gir1.2-ggit-1.0 gir1.2-gtksource-3.0 gir1.2-peas-1.0 lib32gcc1 libatomic1:i386&#xA;  libbsd0:i386 libc6-i386 libdrm-amdgpu1:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386 libdrm2:i386&#xA;  libedit2:i386 libelf1:i386 libexpat1:i386 libffi6:i386 libgl1:i386 libgl1-mesa-dri:i386 libglapi-mesa:i386&#xA;  libglvnd0:i386 libglx-mesa0:i386 libglx0:i386 libido3-0.1-0 libllvm8 libllvm9:i386 libnvidia-cfg1-440&#xA;  libnvidia-common-440 libnvidia-compute-440 libnvidia-compute-440:i386 libnvidia-decode-440 libnvidia-decode-440:i386&#xA;  libnvidia-encode-440 libnvidia-encode-440:i386 libnvidia-fbc1-440 libnvidia-fbc1-440:i386 libpciaccess0:i386&#xA;  libsensors4:i386 libstdc++6:i386 libx11-6:i386 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386 libxcb-dri3-0:i386&#xA;  libxcb-glx0:i386 libxcb-present0:i386 libxcb-sync1:i386 libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6:i386&#xA;  libxfixes3:i386 libxnvctrl0 libxshmfence1:i386 libxxf86vm1:i386 linux-headers-5.0.0-37&#xA;  linux-headers-5.0.0-37-generic linux-headers-5.3.0-51 linux-headers-5.3.0-51-generic linux-image-5.0.0-37-generic&#xA;  linux-image-5.3.0-51-generic linux-modules-5.0.0-37-generic linux-modules-5.3.0-51-generic&#xA;  linux-modules-extra-5.0.0-37-generic linux-modules-extra-5.3.0-51-generic nvidia-dkms-440 nvidia-kernel-common-440&#xA;  nvidia-kernel-source-440 nvidia-prime nvidia-settings ocl-icd-libopencl1 pkg-config screen-resolution-extra&#xA;  xserver-xorg-video-nvidia-440&#xA;Utilice **«sudo apt autoremove»** para eliminarlos.&#xA;0 actualizados, 0 nuevos se instalarán, 0 para eliminar y 0 no actualizados.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;&lt;em&gt;then i use this:&lt;/em&gt;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;$sudo apt autoremove&#xA;&#xA;Leyendo lista de paquetes... Hecho&#xA;Creando árbol de dependencias       &#xA;Leyendo la información de estado... Hecho&#xA;Los siguientes paquetes se ELIMINARÁN:&#xA;  gedit-common gedit-plugins-common gir1.2-ggit-1.0 gir1.2-gtksource-3.0 gir1.2-peas-1.0 lib32gcc1 libatomic1:i386&#xA;  libbsd0:i386 libc6-i386 libdrm-amdgpu1:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386 libdrm2:i386&#xA;  libedit2:i386 libelf1:i386 libexpat1:i386 libffi6:i386 libgl1:i386 libgl1-mesa-dri:i386 libglapi-mesa:i386&#xA;  libglvnd0:i386 libglx-mesa0:i386 libglx0:i386 libido3-0.1-0 libllvm8 libllvm9:i386 libnvidia-cfg1-440&#xA;  libnvidia-common-440 libnvidia-compute-440 libnvidia-compute-440:i386 libnvidia-decode-440 libnvidia-decode-440:i386&#xA;  libnvidia-encode-440 libnvidia-encode-440:i386 libnvidia-fbc1-440 libnvidia-fbc1-440:i386 libpciaccess0:i386&#xA;  libsensors4:i386 libstdc++6:i386 libx11-6:i386 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386 libxcb-dri3-0:i386&#xA;  libxcb-glx0:i386 libxcb-present0:i386 libxcb-sync1:i386 libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6:i386&#xA;  libxfixes3:i386 libxnvctrl0 libxshmfence1:i386 libxxf86vm1:i386 linux-headers-5.0.0-37&#xA;  linux-headers-5.0.0-37-generic linux-headers-5.3.0-51 linux-headers-5.3.0-51-generic linux-image-5.0.0-37-generic&#xA;  linux-image-5.3.0-51-generic linux-modules-5.0.0-37-generic linux-modules-5.3.0-51-generic&#xA;  linux-modules-extra-5.0.0-37-generic linux-modules-extra-5.3.0-51-generic nvidia-dkms-440 nvidia-kernel-common-440&#xA;  nvidia-kernel-source-440 nvidia-prime nvidia-settings ocl-icd-libopencl1 pkg-config screen-resolution-extra&#xA;  xserver-xorg-video-nvidia-440&#xA;0 actualizados, 0 nuevos se instalarán, 75 para eliminar y 0 no actualizados.&#xA;Se liberarán 1.350 MB después de esta operación.&#xA;¿Desea continuar? [S/n] s&#xA;(Leyendo la base de datos ... 268024 ficheros o directorios instalados actualmente.)&#xA;Desinstalando gedit-common (3.28.1-1ubuntu1.2) ...&#xA;Desinstalando gedit-plugins-common (3.28.1-1) ...&#xA;Desinstalando gir1.2-ggit-1.0:amd64 (0.26.2-1) ...&#xA;Desinstalando gir1.2-gtksource-3.0:amd64 (3.24.7-1+elementary6~ubuntu5.0.1) ...&#xA;Desinstalando gir1.2-peas-1.0:amd64 (1.22.0-2) ...&#xA;Desinstalando lib32gcc1 (1:8.4.0-1ubuntu1~18.04) ...&#xA;Desinstalando libnvidia-fbc1-440:i386 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libgl1:i386 (1.0.0-2ubuntu2.3) ...&#xA;Desinstalando libglx0:i386 (1.0.0-2ubuntu2.3) ...&#xA;Desinstalando libglx-mesa0:i386 (19.2.8-0ubuntu0~18.04.3) ...&#xA;Desinstalando libgl1-mesa-dri:i386 (19.2.8-0ubuntu0~18.04.3) ...&#xA;Desinstalando libllvm9:i386 (1:9-2~ubuntu18.04.2) ...&#xA;Desinstalando libatomic1:i386 (8.4.0-1ubuntu1~18.04) ...&#xA;Desinstalando libnvidia-encode-440:i386 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-decode-440:i386 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libxxf86vm1:i386 (1:1.1.4-1) ...&#xA;Desinstalando libxcb-sync1:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libc6-i386 (2.27-3ubuntu1) ...&#xA;Desinstalando libdrm-amdgpu1:i386 (2.4.99-1ubuntu1~18.04.2) ...&#xA;Desinstalando libdrm-intel1:i386 (2.4.99-1ubuntu1~18.04.2) ...&#xA;Desinstalando libdrm-nouveau2:i386 (2.4.99-1ubuntu1~18.04.2) ...&#xA;Desinstalando libdrm-radeon1:i386 (2.4.99-1ubuntu1~18.04.2) ...&#xA;Desinstalando libdrm2:i386 (2.4.99-1ubuntu1~18.04.2) ...&#xA;Desinstalando libedit2:i386 (3.1-20170329-1) ...&#xA;Desinstalando libelf1:i386 (0.170-0.4ubuntu0.1) ...&#xA;Desinstalando libexpat1:i386 (2.2.5-3ubuntu0.2) ...&#xA;Desinstalando libffi6:i386 (3.2.1-8) ...&#xA;Desinstalando libglapi-mesa:i386 (19.2.8-0ubuntu0~18.04.3) ...&#xA;Desinstalando libglvnd0:i386 (1.0.0-2ubuntu2.3) ...&#xA;Desinstalando libido3-0.1-0:amd64 (13.10.0+17.04.20161028-0ubuntu1) ...&#xA;Desinstalando libllvm8:amd64 (1:8-3~ubuntu18.04.2) ...&#xA;Desinstalando xserver-xorg-video-nvidia-440 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-cfg1-440:amd64 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-common-440 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-encode-440:amd64 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-decode-440:amd64 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-compute-440:amd64 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-compute-440:i386 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libnvidia-fbc1-440:amd64 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando libpciaccess0:i386 (0.14-1) ...&#xA;Desinstalando libsensors4:i386 (1:3.4.0-4) ...&#xA;Desinstalando libstdc++6:i386 (8.4.0-1ubuntu1~18.04) ...&#xA;Desinstalando libx11-xcb1:i386 (2:1.6.4-3ubuntu0.2) ...&#xA;Desinstalando libxcb-dri2-0:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libxcb-dri3-0:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libxcb-glx0:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libxcb-present0:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libxdamage1:i386 (1:1.1.4-3) ...&#xA;Desinstalando libxext6:i386 (2:1.3.3-1) ...&#xA;Desinstalando libxfixes3:i386 (1:5.0.3-1) ...&#xA;Desinstalando nvidia-settings (440.44-0ubuntu0.18.04.1) ...&#xA;Desinstalando libxnvctrl0:amd64 (440.44-0ubuntu0.18.04.1) ...&#xA;Desinstalando libxshmfence1:i386 (1.3-1) ...&#xA;Desinstalando linux-headers-5.0.0-37-generic (5.0.0-37.40~18.04.1) ...&#xA;Desinstalando linux-headers-5.0.0-37 (5.0.0-37.40~18.04.1) ...&#xA;Desinstalando linux-headers-5.3.0-51-generic (5.3.0-51.44~18.04.2) ...&#xA;Desinstalando linux-headers-5.3.0-51 (5.3.0-51.44~18.04.2) ...&#xA;Desinstalando linux-modules-extra-5.0.0-37-generic (5.0.0-37.40~18.04.1) ...&#xA;Desinstalando linux-image-5.0.0-37-generic (5.0.0-37.40~18.04.1) ...&#xA;/etc/kernel/postrm.d/initramfs-tools:&#xA;update-initramfs: Deleting /boot/initrd.img-5.0.0-37-generic&#xA;/etc/kernel/postrm.d/zz-update-grub:&#xA;Sourcing file `/etc/default/grub'&#xA;Generando un fichero de configuración de grub...&#xA;Encontrada imagen de linux: /boot/vmlinuz-5.3.0-59-generic&#xA;Encontrada imagen de memoria inicial: /boot/initrd.img-5.3.0-59-generic&#xA;Encontrada imagen de linux: /boot/vmlinuz-5.3.0-53-generic&#xA;Encontrada imagen de memoria inicial: /boot/initrd.img-5.3.0-53-generic&#xA;Encontrada imagen de linux: /boot/vmlinuz-5.3.0-51-generic&#xA;Encontrada imagen de memoria inicial: /boot/initrd.img-5.3.0-51-generic&#xA;Encontrado Windows 10 en /dev/sda1&#xA;hecho&#xA;Desinstalando linux-modules-extra-5.3.0-51-generic (5.3.0-51.44~18.04.2) ...&#xA;Desinstalando linux-image-5.3.0-51-generic (5.3.0-51.44~18.04.2) ...&#xA;/etc/kernel/postrm.d/initramfs-tools:&#xA;update-initramfs: Deleting /boot/initrd.img-5.3.0-51-generic&#xA;/etc/kernel/postrm.d/zz-update-grub:&#xA;Sourcing file `/etc/default/grub'&#xA;Generando un fichero de configuración de grub...&#xA;Encontrada imagen de linux: /boot/vmlinuz-5.3.0-59-generic&#xA;Encontrada imagen de memoria inicial: /boot/initrd.img-5.3.0-59-generic&#xA;Encontrada imagen de linux: /boot/vmlinuz-5.3.0-53-generic&#xA;Encontrada imagen de memoria inicial: /boot/initrd.img-5.3.0-53-generic&#xA;File descriptor 10 (/var/lib/dpkg/triggers/linux-update-5.0.0-37-generic (deleted)) leaked on lvs invocation. Parent PID 8112: /bin/sh&#xA;Encontrado Windows 10 en /dev/sda1&#xA;hecho&#xA;Desinstalando linux-modules-5.0.0-37-generic (5.0.0-37.40~18.04.1) ...&#xA;Desinstalando linux-modules-5.3.0-51-generic (5.3.0-51.44~18.04.2) ...&#xA;Desinstalando nvidia-dkms-440 (440.59-0ubuntu0.18.04.1) ...&#xA;Removing all DKMS Modules&#xA;Done.&#xA;INFO:Disable nvidia&#xA;DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/lenovo_thinkpad&#xA;DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/dell_latitude&#xA;DEBUG:Parsing /usr/share/ubuntu-drivers-common/quirks/put_your_quirks_here&#xA;update-initramfs: deferring update (trigger activated)&#xA;Desinstalando nvidia-kernel-common-440 (440.59-0ubuntu0.18.04.1) ...&#xA;update-initramfs: deferring update (trigger activated)&#xA;Desinstalando nvidia-kernel-source-440 (440.59-0ubuntu0.18.04.1) ...&#xA;Desinstalando nvidia-prime (0.8.8.2) ...&#xA;Desinstalando ocl-icd-libopencl1:amd64 (2.2.11-1ubuntu1) ...&#xA;Desinstalando pkg-config (0.29.1-0ubuntu2) ...&#xA;Desinstalando screen-resolution-extra (0.17.3) ...&#xA;Desinstalando libx11-6:i386 (2:1.6.4-3ubuntu0.2) ...&#xA;Desinstalando libxcb1:i386 (1.13-2~ubuntu18.04) ...&#xA;Desinstalando libxdmcp6:i386 (1:1.1.2-3) ...&#xA;Desinstalando libbsd0:i386 (0.8.7-1ubuntu0.1) ...&#xA;Desinstalando libxau6:i386 (1:1.0.8-1) ...&#xA;Procesando disparadores para desktop-file-utils (0.23-1ubuntu3.18.04.2+elementary2~ubuntu5.0.1) ...&#xA;Procesando disparadores para libglib2.0-0:amd64 (2.56.4-0ubuntu0.18.04.6) ...&#xA;No existe la clave «button-layout» en el esquema «org.gnome.mutter:Pantheon» como se especificó en el archivo de sobrescritura «/usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override»; ignorando la sobrescritura para esta clave.&#xA;No existe la clave «enable-animations» en el esquema «org.gnome.mutter:Pantheon» como se especificó en el archivo de sobrescritura «/usr/share/glib-2.0/schemas/20_elementary.pantheon.wm.gschema.override»; ignorando la sobrescritura para esta clave.&#xA;Procesando disparadores para initramfs-tools (0.130ubuntu3.9) ...&#xA;update-initramfs: Generating /boot/initrd.img-5.3.0-59-generic&#xA;I: The initramfs will attempt to resume from /dev/sda6&#xA;I: (UUID=06c6f90c-835b-4330-8aeb-44ebeaf7bed3)&#xA;I: Set the RESUME variable to override this.&#xA;Procesando disparadores para bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu1) ...&#xA;Rebuilding /usr/share/applications/bamf-2.index...&#xA;Procesando disparadores para libc-bin (2.27-3ubuntu1) ...&#xA;Procesando disparadores para doc-base (0.10.8) ...&#xA;Procesando 1 archivo doc-base eliminado...&#xA;Procesando disparadores para man-db (2.8.3-2ubuntu0.1) ...&#xA;Procesando disparadores para gnome-menus (3.13.3-11ubuntu1.1) ...&#xA;Procesando disparadores para dbus (1.12.2-1ubuntu1.1) ...&#xA;Procesando disparadores para hicolor-icon-theme (0.17-2) ...&#xA;Procesando disparadores para mime-support (3.60ubuntu1) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;hr&gt;&#xA;&#xA;&lt;p&gt;AND FINISH, APT IS WORKING AGAIN AND I DON'T WANT TO INSTALL NVIDIA NEVER! XD THANKS MY FRIENDS&lt;/p&gt;&#xA;&#xA;&lt;hr&gt;&#xA;" OwnerUserId="23140" LastActivityDate="2020-06-13T06:15:46.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24893" PostTypeId="1" CreationDate="2020-06-13T08:20:34.623" Score="0" ViewCount="112" Body="&lt;p&gt;Does anyone know a fix for &lt;a href=&quot;https://github.com/elementary/switchboard-plug-sound/issues/149&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; issue ?&lt;/p&gt;&#xA;" OwnerUserId="19705" LastActivityDate="2020-06-13T08:57:37.490" Title="How to change default sound input?" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24894" PostTypeId="2" ParentId="24893" CreationDate="2020-06-13T08:57:37.490" Score="2" Body="&lt;p&gt;You might want to check out pavucontrol.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-13T08:57:37.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24895" PostTypeId="2" ParentId="24199" CreationDate="2020-06-13T09:41:59.737" Score="0" Body="&lt;p&gt;I have found solution:&#xA;just use recovery mode and use terminal (ls -a to list all folder and then cd /.config) here you can find dconf configuration folder just delete it and everything will come back normal&lt;/p&gt;&#xA;" OwnerUserId="22556" LastActivityDate="2020-06-13T09:41:59.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24896" PostTypeId="1" CreationDate="2020-06-13T09:47:04.040" Score="0" ViewCount="1172" Body="&lt;p&gt;^^ I installed xanmod and cant seem to get rid of it (it doesnt work with official nvidia drivers), i tried everything I knew to switch back to the default but it didn't work.&lt;/p&gt;&#xA;" OwnerUserId="23190" LastActivityDate="2024-02-23T19:08:21.020" Title="How do i reinstall and use the default kernel?" Tags="|settings|kernel|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24897" PostTypeId="2" ParentId="24896" CreationDate="2020-06-13T11:27:46.870" Score="0" Body="&lt;p&gt;Type in terminal :&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo - i&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Provide your password to become a root. &#xA;Then type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;dpkg -l | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This will list all installed kernels. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;To remove unwanted kernel type in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove linux-image-number of the kernel you want to remove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or eventually something like &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove 5.7.2-xanmod1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Or &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;apt remove linux-xanmod&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;This I think should work. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;To update grub.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Additionally install grub customizer. Link: &lt;a href=&quot;https://tipsonubuntu.com/2018/03/11/install-grub-customizer-ubuntu-18-04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;how to install grub customizer&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;And select which kernel should be loaded as first. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-13T11:34:02.390" LastActivityDate="2020-06-13T11:34:02.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24898" PostTypeId="2" ParentId="19515" CreationDate="2020-06-13T14:41:57.790" Score="0" Body="&lt;p&gt;One hacky way to do it would be to run &lt;code&gt;killall wingpanel&lt;/code&gt;&#xA;and then &lt;code&gt;wingpanel &amp;amp;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23193" LastActivityDate="2020-06-13T14:41:57.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24902" PostTypeId="1" CreationDate="2020-06-13T20:49:10.600" Score="2" ViewCount="736" Body="&lt;p&gt;I am currently on Pop!_OS with Gnome. My preferred DE is Pantheon/Elementary OS. I need to toggle back and forth between CPU performance states based on my workload. Basically, whether I am doing audio work (recording or mixing) or writing/data entry.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Currently, I use &lt;a href=&quot;https://github.com/martin31821/cpupower&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/martin31821/cpupower&lt;/a&gt; + indicator-cpufreq to gain access to most parameters I need to control&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does a tool exist for Elementary OS that can do any of&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Save/recall profiles that contain different values for&lt;/li&gt;&#xA;&lt;li&gt;Min/max target frequency&lt;/li&gt;&#xA;&lt;li&gt;Enable/disable turbo boost&lt;/li&gt;&#xA;&lt;li&gt;Change pstate governor between powersave and performance&lt;/li&gt;&#xA;&lt;li&gt;enable/disable symmetric multithreading (many people ask why; each physical core only has one FPU, and thus disabling multithreading optimizes performance and more accurately reports CPU utilization in operations that rely heavily on FPU utilization)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Larger discussion on power control interfaces: &lt;a href=&quot;https://pop-planet.info/forums/threads/power-management-design-interface.739&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pop-planet.info/forums/threads/power-management-design-interface.739&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23095" LastEditorUserId="23095" LastEditDate="2020-06-15T02:42:03.250" LastActivityDate="2020-07-15T03:08:45.890" Title="CPU frequency control tool?" Tags="|settings|power|cpu|performance|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24903" PostTypeId="1" CreationDate="2020-06-13T23:01:08.667" Score="0" ViewCount="69" Body="&lt;p&gt;I bought the app Eddy, but needed to re-install eOS, however when I go back to Eddy it is only allowing another purchase as an option. Can anyone advise how (to a noob with linux) I can restore this purchase?&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerDisplayName="user23200" LastActivityDate="2020-06-14T04:53:49.720" Title="re-install purchased apps?" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24904" PostTypeId="2" ParentId="24878" CreationDate="2020-06-14T04:50:20.927" Score="0" Body="&lt;p&gt;How to upgrade Elementary OS to the newest kernel. &lt;/p&gt;&#xA;&#xA;Install necessary packages&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential libncurses-dev bison flex libssl-dev libelf-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;To check hardware&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;To check missing firmware&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Make directories for firmware and kernel&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mkdir /home/username/Downloads/amdgpu&#xA;mkdir /home/username/Downloads/kernel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;To get rid of missing firmware errors for amdgpu&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Possible missing firmware /lib/firmware/amdgpu/vega20_ta.bin for module amdgpu ####&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Download amdgpu&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/amdgpu&#xA;wget https://github.com/M-Bab/linux-kernel-amdgpu-binaries/files/4124959/firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;unzip firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;sudo dpkg -i firmware-radeon-ucode-rock_2.110_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;Download kernel 5.7.0&#xA;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/kernel&#xA;wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.7.tar.xz&#xA;tar -xf linux-5.7.tar.xz&#xA;cd linux-5.7&#xA;cp -v /boot/config-$(uname -r) .config&#xA;make menuconfig &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;save config and then exit -&gt; See source: &lt;a href=&quot;https://www.cyberciti.biz/tips/compiling-linux-kernel-26.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cyberciti.biz/tips/compiling-linux-kernel-26.html&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you have to chosee between make -j 4 or make -j - explanation below&lt;/p&gt;&#xA;&#xA;use 4 core/thread - if your processor have 4 cores&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make -j 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;use 8 core/thread - if your processor have 8 cores&#xA;&#xA;&lt;pre&gt;&lt;code&gt;make -j 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Install modules&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo make modules_install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;compile the kernel&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo make install &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Update init ram and filesystem&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -c -k 5.7.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;ignore these errors below, just because those three bin files are not made yet&#xA;&#xA;&lt;pre&gt;&lt;code&gt;W: Possible missing firmware /lib/firmware/amdgpu/navi12_ta.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_dmcu.bin for module amdgpu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Update grub&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Restart computer&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;Check the kernel version&#xA;&#xA;&lt;pre&gt;&lt;code&gt;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;To check missing firmware after compilation of new kernel&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;to check errors after reboot:&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -b&#xA;sudo dmesg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T04:50:20.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24906" PostTypeId="2" ParentId="24903" CreationDate="2020-06-14T04:53:49.720" Score="1" Body="&lt;p&gt;You do not have to. Just choose 0 to pay 0 for the app and then you will be able to install it. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;Eventually if you are familiar with the terminal, open the terminal and type:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install eddy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T04:53:49.720" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24907" PostTypeId="2" ParentId="24902" CreationDate="2020-06-14T05:06:46.483" Score="1" Body="&lt;p&gt;Check this: &lt;a href=&quot;https://snapcraft.io/auto-cpufreq&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/auto-cpufreq&lt;/a&gt; Hope, this will suit your needs.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:06:46.483" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24908" PostTypeId="2" ParentId="24770" CreationDate="2020-06-14T05:25:29.833" Score="1" Body="&lt;p&gt;Edit the file /etc/networking/interfaces and put a # in front of EVERY line. This will comment them out. NOTE you will need to use sudo and suggest command&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/network/interfaces&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Next, stop and restart the NetworkManager.service with:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop NetworkManager.service&#xA;sudo systemctl start NetworkManager.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;The start and stop of the network mnager should be two separate command - most easily done on two lines. First enter sudo systemctl stop NetworkManager.service on one line. Then enter sudo systemctl start NetworkManager.service on a new line.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second way you can edit network connections is to use the network manager tool in terminal:&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nmtui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;There you will be able to edit connections and save your changes. After the restart it should remember your settings. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:25:29.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24909" PostTypeId="2" ParentId="24880" CreationDate="2020-06-14T05:32:47.557" Score="0" Body="&lt;p&gt;Go to &lt;a href=&quot;https://developers.hp.com/hp-linux-imaging-and-printing/gethplip&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://developers.hp.com/hp-linux-imaging-and-printing/gethplip&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;choose Ubuntu from the drop-down list and download recommended drivers (HPLIP).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Instructions are on the website I provided, however I cannot guarantee it will work.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:32:47.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24910" PostTypeId="2" ParentId="24869" CreationDate="2020-06-14T05:40:41.550" Score="0" Body="&lt;p&gt;You can always run some lie distribution form usb stick and then use sudo update-grub command, or grub customizer &lt;a href=&quot;https://tipsonubuntu.com/2018/03/11/install-grub-customizer-ubuntu-18-04-lts/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://tipsonubuntu.com/2018/03/11/install-grub-customizer-ubuntu-18-04-lts/&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Chroot system is easy, press e on the keyboard when you selected the proper linux entry in grub and then type &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;rd.break&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;press ctrl+x&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;mount -o remount, rw /sysroot/&#xA;chroot /sysroot/&#xA;update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:40:41.550" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24911" PostTypeId="2" ParentId="23999" CreationDate="2020-06-14T05:47:00.393" Score="-1" Body="&lt;pre&gt;&lt;code&gt;cd &amp;amp;&amp;amp; cd Downloads&#xA;wget https://launchpad.net/ubuntu/+archive/primary/+sourcefiles/plank/0.11.89-1/plank_0.11.89.orig.tar.xz&#xA;tar xf plank_0.11.89.orig.tar.xz&#xA;cd plank-0.11.89&#xA; ./configure&#xA;make&#xA;sudo make install&#xA;sudo apt install --reinstall plank libplank*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Additionally to enable zoom in Plank:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Two files need to be edited before you can get the zoom effect, copy/paste.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/local/share/plank/themes/Default/dock.theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Add the following in the end of the file;&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;ZoomEnabled=true&#xA;ZoomPercent=150&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Save: [ctrl]+[o] and Exit: [ctrl]+[x]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The last file to edit is the schema file of Plank.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/glib-2.0/schemas/net.launchpad.plank.gschema.xml&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Look for (near the end of the file).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&#xA;                        false&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Change false to true&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Save: [ctrl]+[o] and Exit: [ctrl]+[x]&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Last thing.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;killall plank&amp;amp;&amp;amp; plank&amp;amp;&#xA;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Now enable Zoom effect in preferences.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:47:00.393" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24912" PostTypeId="2" ParentId="24870" CreationDate="2020-06-14T05:57:15.970" Score="0" Body="&lt;p&gt;I'd suggest you follow my advice and pick another application than Music. Lollypop is a good example.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Usually it's very easy to choose another music player.&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;Open System Settings&#xA;Click at Applications&#xA;Change default Music Player&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Anyway the app volume settings shows in tray when you click the volume icon, when you run the music app (Spotify, Lollypop, Audacity etc.). If you will run the Spotify it will be there, the same for Lollypop. It disappears, when you turn off the music app. Hope my explanation is pretty clear.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-14T05:57:15.970" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24916" PostTypeId="2" ParentId="24739" CreationDate="2020-06-14T12:39:43.707" Score="0" Body="&lt;p&gt;Solved : I have a dual boot installation with Windows 10 and somehow several updates waiting for installation were causing this issue. After installing them and removing the grub files modifications everything works fine.&lt;/p&gt;&#xA;" OwnerUserId="23063" LastActivityDate="2020-06-14T12:39:43.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24919" PostTypeId="1" CreationDate="2020-06-15T02:55:41.073" Score="0" ViewCount="127" Body="&lt;p&gt;I saw one over at Git Hub for MSI keyboards, but not sure if it would work for HP ones...I can turn the backlighting on an off ok using the Fn key, but the factory (W10 based setup) has an app that allows one to set a static colour. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;So question is does anyone know of anything for ubuntu that could do the same?&lt;/p&gt;&#xA;" OwnerDisplayName="user23200" LastActivityDate="2020-06-15T02:55:41.073" Title="multi coloured backlit keyboard - any apps to control this in Linux/" Tags="|keyboard|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24920" PostTypeId="2" ParentId="24840" CreationDate="2020-06-15T06:03:43.870" Score="1" Body="&lt;blockquote&gt;&#xA;  &lt;p&gt;sudo update-initramfs -u&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;update-initramfs: Generating /boot/initrd.img-5.7.1-050701-generic&#xA;W: Possible missing firmware /lib/firmware/i915/skl_huc_2.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/skl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_huc_2.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_huc_4.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/glk_huc_4.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/glk_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_huc_4.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/cml_huc_4.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/cml_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_huc_9.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_huc_9.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_guc_33.0.4.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.0.12.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_guc_35.2.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_dmc_ver1_09.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_dmc_ver2_06.bin for module i915&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23168" LastActivityDate="2020-06-15T06:03:43.870" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24922" PostTypeId="1" AcceptedAnswerId="24927" CreationDate="2020-06-15T08:06:52.507" Score="0" ViewCount="49" Body="&lt;p&gt;I am new to elementary, having installed it today (without clicking the update or install drivers in installation) and I noticed the abysmal internet speeds on my computer. Tested it using fast.com and got 3 Mbps on my phone and 0.3 Mbps on my computer.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am guessing its some kind of driver error since I did not install any WiFi drivers yet but I also found no guides on this matter (running a built in Intel ® Dual Band Wireless-AC 9260).&lt;/p&gt;&#xA;&#xA;&lt;p&gt;So if it is a missing driver, how do I install it? and if not what is the issue?&lt;/p&gt;&#xA;" OwnerUserId="23207" LastActivityDate="2020-06-15T14:10:28.637" Title="WiFi speed is 10 times slower on my PC then on my phone" Tags="|wifi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24923" PostTypeId="2" ParentId="24840" CreationDate="2020-06-15T09:32:03.810" Score="0" Body="&lt;p&gt;Try this solution:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;1. cd /home/yourusername/Downloads/&#xA;&#xA;2. mkdir i915&#xA;&#xA;3. cd /i915/&#xA;&#xA;4. git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git&#xA;&#xA;5. sudo cp -R ./linux-firmware/i915/* /lib/firmware/i915/&#xA;&#xA;6. sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It was made a corection in line 5.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="12891" LastEditDate="2020-08-08T23:15:09.420" LastActivityDate="2020-08-08T23:15:09.420" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="24924" PostTypeId="2" ParentId="24870" CreationDate="2020-06-15T11:34:13.453" Score="0" Body="&lt;p&gt;Search in AppCenter the Music App and remove it.&lt;a href=&quot;https://i.stack.imgur.com/4iYqv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4iYqv.png&quot; alt=&quot;Music app&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-15T11:34:13.453" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24925" PostTypeId="1" AcceptedAnswerId="24934" CreationDate="2020-06-15T12:15:40.170" Score="0" ViewCount="199" Body="&lt;p&gt;I can't add pop3 mail.. I don't have IMAP feature in my mail account.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KrDFd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KrDFd.png&quot; alt=&quot;enter image description here&quot;&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23219" LastActivityDate="2020-07-15T22:00:35.067" Title="I can't add pop3 to mail in Elementary OS?" Tags="|settings|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24927" PostTypeId="2" ParentId="24922" CreationDate="2020-06-15T14:10:28.637" Score="0" Body="&lt;p&gt;It was a hardware issue:&lt;/p&gt;&#xA;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;USB antenna was next to the WiFi antennas&lt;/li&gt;&#xA;&lt;li&gt;WiFi antennas themselves were folded in too much&lt;/li&gt;&#xA;&lt;li&gt;Bluetooth was on &lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="23207" LastActivityDate="2020-06-15T14:10:28.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24928" PostTypeId="1" CreationDate="2020-06-15T17:13:05.370" Score="0" ViewCount="181" Body="&lt;p&gt;big noob here&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I recently installed Telegram via Flathub to have the updates because the version of the app center is old. However, when i close the app, it can't have the notifications when I recive new messages like before. Is it possible to put Telegram in background process in order to have the notifications ?&lt;/p&gt;&#xA;" OwnerUserId="23217" LastActivityDate="2024-02-26T13:03:10.410" Title="Putting Telegram in background" Tags="|wingpanel|system|thirdpartyapps|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24932" PostTypeId="1" CreationDate="2020-06-15T20:11:10.013" Score="0" ViewCount="1026" Body="&lt;p&gt;How do i set a static IP address? &#xA;unable to find documentation on using the gui or terminal. It would probably be easier if i knew what fork of Linux this was developed from.&lt;/p&gt;&#xA;" OwnerUserId="23222" LastActivityDate="2020-06-15T21:09:31.093" Title="Unable to set a Static IP Address in elementary os" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24933" PostTypeId="2" ParentId="24932" CreationDate="2020-06-15T21:09:31.093" Score="1" Body="&lt;p&gt;Elementary was originally based on Ubuntu, which was originally based on Debian.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;You can set a static IP via the Network settings GUI.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click Applications menu.&lt;/li&gt;&#xA;&lt;li&gt;Click System Settings from the menu.&lt;/li&gt;&#xA;&lt;li&gt;Click Network from the settings app.&lt;/li&gt;&#xA;&lt;li&gt;Select your network connection in left-hand sidebar.&lt;/li&gt;&#xA;&lt;li&gt;Click Advanced Settings in the lower-right corner.&lt;/li&gt;&#xA;&lt;li&gt;Click the IPv4 settings tab.&lt;/li&gt;&#xA;&lt;li&gt;Select Manual as the configuration method.&lt;/li&gt;&#xA;&lt;li&gt;Set your IP.&lt;/li&gt;&#xA;&lt;li&gt;Repeat on the IPv6 tab if needed.&lt;/li&gt;&#xA;&lt;li&gt;Click Save.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="4262" LastActivityDate="2020-06-15T21:09:31.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24934" PostTypeId="2" ParentId="24925" CreationDate="2020-06-15T21:22:53.610" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/mail/issues/44&quot; rel=&quot;nofollow noreferrer&quot;&gt;According to this issue discussed in 2017-2018&lt;/a&gt; POP3 is not supported but may possibly be supported in a future rewrite of the Elementary Mail app.&lt;/p&gt;&#xA;" OwnerUserId="4262" LastActivityDate="2020-06-15T21:22:53.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24935" PostTypeId="1" AcceptedAnswerId="24955" CreationDate="2020-06-16T03:21:23.737" Score="1" ViewCount="3096" Body="&lt;p&gt;I have tried to implement a solution to accomplish at least 4 windows tiling, Elementary seems to do only vertical 2 sides windows tiling as detailed here.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried and failed with the instructions here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/UbuntuBudgie/window-shuffler&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/UbuntuBudgie/window-shuffler&lt;/a&gt;&#xA;&lt;a href=&quot;https://github.com/UbuntuBudgie/budgie-extras&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/UbuntuBudgie/budgie-extras&lt;/a&gt;&#xA;&lt;a href=&quot;https://discourse.ubuntubudgie.org/t/window-shuffler/39/6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://discourse.ubuntubudgie.org/t/window-shuffler/39/6&lt;/a&gt;&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I tried adding the ubuntu-budgie-welcome as stated here:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&quot;Ubuntu - use the ubuntu-budgie-welcome snap - and install via Menu - Budgie Applets&quot;&#xA;got a bunch of staff installed but the new apps would not run and the budgie-welcome did not start anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;With one of the instructions I got to the point where it would show the App but it wouldn't do anything.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Any advise on getting this or any other solution that will help me get a big screen better and more easily organized very much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23205" LastEditorUserId="15904" LastEditDate="2020-06-19T13:20:17.463" LastActivityDate="2020-06-19T21:32:55.857" Title="Windows Tiling in Elementary OS 5.1" Tags="|release-hera|display|desktop|gala|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24936" PostTypeId="1" CreationDate="2020-06-16T05:59:22.720" Score="0" ViewCount="228" Body="&lt;p&gt;Recently I installed elementaryos Hera to my dell inspiron 5378 which is a 2 in 1 laptop. Whenever I unlock my pc, my pc is in tablet mode in most of the time which disables the keyboard and sometimes auto-rotates the screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;My question is how can I disable the screen rotation and enable the keyboard for typing my password in login screen.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;P.S. I had this problem in gnome (Popos, Ubuntu) but not in KDE (Kubuntu). I think problem will solved if I use sddm but I would like to keep the default login screen if its possible.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;What I tried that didn't work: disabling screen rotation from dconf editor&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thank you for your support.&lt;/p&gt;&#xA;" OwnerUserId="23158" LastActivityDate="2020-06-16T05:59:22.720" Title="Elementaryos Hera (5,1) how to disable tablet mode in login screen" Tags="|greeter|keyboard|tablet|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="24937" PostTypeId="2" ParentId="24928" CreationDate="2020-06-16T06:11:16.283" Score="0" Body="&lt;p&gt;Did you enable the wingpanel notifications? By default elementaryos doesn't allow notifications to third party apps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;In order to enable it for third party apps I recommend you to use these steps. &lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=8S_Z82DDFbo&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=8S_Z82DDFbo&lt;/a&gt; &lt;/p&gt;&#xA;&#xA;&lt;p&gt;It worked for me.&lt;/p&gt;&#xA;" OwnerUserId="23158" LastActivityDate="2020-06-16T06:11:16.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24939" PostTypeId="1" CreationDate="2020-06-16T08:20:18.740" Score="0" ViewCount="294" Body="&lt;p&gt;This is a major annoyance.&lt;/p&gt;&#xA;&lt;p&gt;I've just installed Elementary on an external SSD (used Gparted to configure the partitions on the drive etc.) and when the installation is finished I find the install process has added a Grub partition to my internal boot drive, even though I never asked the installer to do this (MacBook Pro, Catalina).&lt;/p&gt;&#xA;&lt;p&gt;So now when I boot my MacBook, unattended, it always boots into the Grub CLI. Why would the installer do this - I have no desire to boot Elemntary from the internal drive so it should leave it alone. I have Pop OS installed on another drive and the Pop installer didn't add Grub.&lt;/p&gt;&#xA;&lt;p&gt;Two questions then: why? And how do I get rid of the Grub boot option from my internal drive (without having to reinstall everything) as it's 100% not necessary?&lt;/p&gt;&#xA;&lt;p&gt;To follow up the response from Sysadmin here: I did only create partitions on the external drive: /boot, /swap, / and /home. No partitions were created on the internal drive by me in Gparted. I also set the installer to install on the external drive.&lt;/p&gt;&#xA;&lt;p&gt;Fdisk is not used on Catalina (zsh) but the equivalent command using 'diskutil' is 'diskutil list'. The output is below. From what I can tell the EFI:EFI partition (200mb ish) (dev/disk1) is the one that was created by the Elementary installer. I also have part of that drive partitioned for Pop OS hence the number of partitions.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aTH1A.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aTH1A.png&quot; alt=&quot;Diskutil output&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Update edit:&lt;/p&gt;&#xA;&lt;p&gt;I ran fdisk -l and efibootmgr -v as requested (but from within Pop!_OS (this should give the same results right? If not I'll try it again from Elementary)&lt;/p&gt;&#xA;&lt;p&gt;(The output from efibootmgr did show up a couple of odd things: those two entries in Chinese characters with 'refind' in the path. Has something installed refind? Is this normal?)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LBHCW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LBHCW.png&quot; alt=&quot;fdisk -l&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8viZb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8viZb.png&quot; alt=&quot;efibootmgr -v&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22877" LastEditorUserId="22877" LastEditDate="2020-06-19T08:08:54.080" LastActivityDate="2024-02-29T19:02:00.227" Title="Why does the Elementary installer insist on installing Grub on a drive that I haven't installed Elementary on?" Tags="|grub|macbook|install|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="24940" PostTypeId="2" ParentId="22082" CreationDate="2020-06-16T13:22:22.317" Score="0" Body="&lt;p&gt;Works great my T420, if that is any help.&lt;/p&gt;&#xA;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Samsung and Brother.  Go to their site and see if they have drivers for Linux.  My Brother MFC-J6720DW has drivers so I am good.  You must look at the messages in the terminal to see if there are any unmet dependencies.  These can usually be found using Synaptic.  While you're at it add system-config-printer as well.  This is a far superior printer configuration utility and has a GUI but must be launched from the command line.  &lt;/li&gt;&#xA;&lt;li&gt;Fingerprint reader.  I don't have one but this could be problematic.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&#xA;&lt;p&gt;Regardless.  First time you experiment just do the standard installation on a spare drive and don't try anything fancy like dual boot.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-06-16T13:22:22.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24941" PostTypeId="1" CreationDate="2020-06-16T15:22:58.257" Score="0" ViewCount="29" Body="&lt;p&gt;Just recently when applying updates via AppCentre the option to enter the root password (or any passsword) no longer appears. I have no idea why but obviously I would like this protective feature back.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="23228" LastActivityDate="2020-06-16T15:39:09.680" Title="Root password option no longer appears on App Centre installs" Tags="|release-hera|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24942" PostTypeId="2" ParentId="24941" CreationDate="2020-06-16T15:34:41.480" Score="1" Body="&lt;p&gt;Then you must ask for this developers at git or Twitter. They are not using this forum. They have official channel on Facebook. Last time, about week ago they mentioned they are going to remove the password from the App Center. So eventually you can use terminal to install apps with&lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nameoftheapp &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-16T15:34:41.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24944" PostTypeId="2" ParentId="24939" CreationDate="2020-06-16T15:50:11.683" Score="0" Body="&lt;p&gt;First of all I am not familiar with Apple file system, so sorry for that.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The command &lt;/p&gt;&#xA;&#xA;&lt;pre&gt;&lt;code&gt;sudo fdisk -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&#xA;&lt;p&gt;Will show in Linux all partitions.&#xA;Eventually if you prefer graphical representation you can use gparted or any other software for partitioning in Linux.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Then you can provide screenshots or results from fdisk.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;This will help to understand what happened and why.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I am not sure but by default grub is installed on internal hard drive. But have no option to proove it.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;To make it work you need a /boot partition on external hard drive. That is why I always recommend manual partitioning during the Linux installation.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The proper way is to create separate partition for /boot, separate for / and separate for /home and separate for /var at least.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;If /boot is not created on external disk it is created on internal or if /boot exists on internal grub is copying files there.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Hope my explanation is enough clear.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Excuse for my English, I am not native speaker. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-16T15:50:11.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24945" PostTypeId="1" CreationDate="2020-06-16T16:03:27.490" Score="0" ViewCount="193" Body="&lt;p&gt;I'm using a ProtonMail account with Mail. The 'loading' indicator never stops spinning. Eventually, messages load in the left pane, but never seem to load in the right pane.&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2024-02-27T04:09:21.077" Title="Protonmail account never properly loads" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24946" PostTypeId="2" ParentId="24945" CreationDate="2020-06-16T18:13:11.270" Score="0" Body="&lt;p&gt;I'm also using the proton-bridge.&#xA;You might want to check this out:&lt;/p&gt;&#xA;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21387/how-do-i-fix-the-error-couldnt-find-a-place-to-store-the-pinned-certificate&quot;&gt;How do I fix the error &amp;quot;couldn&amp;#39;t find a place to store the pinned certificate&amp;quot;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="10064" LastActivityDate="2020-06-16T18:13:11.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24947" PostTypeId="1" CreationDate="2020-06-16T20:22:14.827" Score="0" ViewCount="625" Body="&lt;p&gt;I am still deciding which Linux distro to download on my new laptop. One of the things I do on the laptop is writing. Is there a good but free word processor to use with this OS?&#xA;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="23232" LastActivityDate="2020-06-19T18:31:56.900" Title="What is the best word processor to use with Elementary OS?" Tags="|applications|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24948" PostTypeId="2" ParentId="24947" CreationDate="2020-06-16T21:51:35.740" Score="1" Body="&lt;p&gt;That's an opinion based question so you're so to get a lot of different responses. I personally us LibreOffice Writer.&lt;/p&gt;&#xA;" OwnerUserId="15904" LastActivityDate="2020-06-16T21:51:35.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24949" PostTypeId="1" CreationDate="2020-06-17T00:28:23.883" Score="0" ViewCount="59" Body="&lt;p&gt;Ok, so I do not want to have the drive bootable, I do not want any existing data destroyed on the target device, all I want to do is clone the hard drive to an external source, much like I could do with Acronis on the PC. Preferably with a GUI. Although command line is okay with clear instructions.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;That way if anything really bad happens, instead of going through the entire process of re-installing OS, updates, installing programs etc etc, it's all there in one image!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;I have searched google and although I have found many apps that propose they can do this, they actually cannot without meeting all the criteria above!&lt;/p&gt;&#xA;&#xA;&lt;p&gt;Does anyone here have any suggestions?&lt;/p&gt;&#xA;" OwnerDisplayName="user23200" LastActivityDate="2020-06-17T00:28:23.883" Title="cloning the Linux hard drive to an exteranl USB Drive?" Tags="|backup|" AnswerCount="0" CommentCount="12" ContentLicense="CC BY-SA 4.0" />
  <row Id="24950" PostTypeId="1" CreationDate="2020-06-17T01:05:44.677" Score="0" ViewCount="123" Body="&lt;p&gt;When I boot into the flash drive and try to install it, the screen says &quot;unsupported&quot; and there's nothing I can do except turning off the PC.&#xA;Is there a way to fix that?&lt;/p&gt;&#xA;" OwnerUserId="23234" LastActivityDate="2024-02-27T23:01:30.330" Title="Can't install elementary OS because my monitor doesn't support the default resolution" Tags="|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24951" PostTypeId="1" CreationDate="2020-06-17T01:14:38.563" Score="0" ViewCount="119" Body="&lt;p&gt;I tried a few methods to disable the laptop camera, but none work. Can anyone advise how I can do this in elementary OS?&lt;/p&gt;&#xA;" OwnerDisplayName="user23200" LastActivityDate="2021-07-13T06:31:24.847" Title="How do I disable a laptop camera" Tags="|webcam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24952" PostTypeId="2" ParentId="24951" CreationDate="2020-06-17T08:25:13.843" Score="0" Body="&lt;p&gt;You can disable camera in BIOS. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-17T08:25:13.843" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24953" PostTypeId="2" ParentId="24950" CreationDate="2020-06-17T08:33:51.487" Score="0" Body="&lt;p&gt;Put the usb stick to a working operating system, open it go to /boot directory find the configuration file and open it and uncomment disable_overscan=1 (if this parameter is 0 then set it to 1).&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-17T08:33:51.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24954" PostTypeId="2" ParentId="24947" CreationDate="2020-06-17T08:40:37.647" Score="0" Body="&lt;p&gt;I myself am a writer and I prefer WPS Office: &lt;a href=&quot;https://www.wps.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;Homepage&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-06-17T08:40:37.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24955" PostTypeId="2" ParentId="24935" CreationDate="2020-06-17T08:42:28.800" Score="0" Body="&lt;p&gt;You can try this : &lt;a href=&quot;https://github.com/ssokolow/quicktile&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ssokolow/quicktile&lt;/a&gt; However I would recommend to read more about this, because I am not familiar with this solution.&lt;/p&gt;&#xA;&#xA;&lt;p&gt;The second option is to use xmonad &lt;a href=&quot;https://xmonad.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://xmonad.org/&lt;/a&gt;, just because i3 does not work properly on Elementary OS Juno and Hera. It works on Loki (because of GTK versions which are different in mentioned Elementary OS versions), but I do not see any sense in using older version of Elementary OS. Anyway it is your choice. &lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-17T08:42:28.800" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24956" PostTypeId="2" ParentId="24840" CreationDate="2020-06-17T09:14:53.750" Score="0" Body="&lt;p&gt;I have the same issue. I have installed Hera on an Ideapad 100S-11IBY and there is no sound. The sound settings screen frist shows there is no audio device but in a few moments it switches to Atom Processor Z36xxx/Z37xxx Series Graphics &amp;amp; Display (???)&lt;/p&gt;&#xA;&lt;p&gt;I have tried your solution, but I am getting the same error.&#xA;additional note, even though I run command with sudo it does not ask for the password.&lt;/p&gt;&#xA;&lt;p&gt;the issue of cp is the way you typed the source directory /firmware-linux... it is looking for it in the root directory instead of current folder.&#xA;when I changed the line to this:&lt;/p&gt;&#xA;&lt;p&gt;sudo cp -R firmware-linux/i915/* /lib/firmawere/i915&lt;/p&gt;&#xA;&lt;p&gt;it ran correctly.&lt;/p&gt;&#xA;&lt;p&gt;after the full process I have rebooted but I am still getting the No output device screen&lt;/p&gt;&#xA;" OwnerUserId="23235" LastActivityDate="2020-06-17T09:14:53.750" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24957" PostTypeId="1" CreationDate="2020-06-17T12:34:15.100" Score="1" ViewCount="328" Body="&lt;p&gt;I have a Bluetooth earphone with microphone. I have successfully connected it to my elementary OS. But it shows it only as an output device under the sound setting. It doesn't list under the input devices.&#xA;I installed the pavucontrol and tried to see the input devices. It is coming under the Monitor. Where I am listening to something on youtube or something, I can see the movement of the level bar.&#xA;I installed the Bluetooth manager from the app store. The audio profile coming by default for my headset is A2DP sink and if I am trying to change it to HSP/HFP. It shows me 'Failed to change profile to headset_head_unit' error.&#xA;Can you please help me setting up my audio/Bluetooth drives correctly so that I can use it as a mic also.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xvF87.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xvF87.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23238" LastActivityDate="2020-06-17T12:34:15.100" Title="Bluetooth headset with microphone not recognising as an input device" Tags="|release-hera|sound|bluetooth|audio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24965" PostTypeId="1" CreationDate="2020-06-18T10:04:16.277" Score="0" ViewCount="208" Body="&lt;p&gt;How do I add icons on the desktop, such as the Trash, Documents, and Home icons?&lt;/p&gt;&#xA;&lt;p&gt;I am using Elementary Hera  5.1.5.&lt;/p&gt;&#xA;" OwnerUserId="23249" LastEditorUserId="15074" LastEditDate="2020-07-03T04:44:42.010" LastActivityDate="2024-03-17T08:02:35.300" Title="How do I add icons on the desktop?" Tags="|release-hera|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24967" PostTypeId="1" CreationDate="2020-06-18T18:49:28.327" Score="0" ViewCount="215" Body="&lt;p&gt;How does one rename a drive using the files app in eOS? On windows it was a simple thing to do, but in Linux I cannot see how I do it. I named the disk when creating and mounting it, but under Files, it just reads 500GB Volume.&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerDisplayName="user23200" LastActivityDate="2024-03-02T07:06:10.790" Title="renaming a drive in the files app" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24971" PostTypeId="2" ParentId="24509" CreationDate="2020-06-19T00:06:59.933" Score="1" Body="&lt;p&gt;I had the exact issue. After rebooting my computer, my mouse and keyboard were completely unresponsive and I noticed that a blinking cursor on one of my start-up programs became and stayed solid, suggesting that my entire system had crashed.&lt;/p&gt;&#xA;&lt;p&gt;I'm not sure if you're still having the issue, but I was able to solve my issue by reinstalling input devices:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --reinstall xserver-xorg-input-all&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23254" LastActivityDate="2020-06-19T00:06:59.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24972" PostTypeId="1" CreationDate="2020-06-19T06:00:32.433" Score="1" ViewCount="52" Body="&lt;p&gt;Just like on Windows, when you visit some websites, they check if you have dark theme enabled in the OS and switch their website to dark theme. Is it possible on Elementary OS? (For eg, the chrome://settings page gets darkened if dark mode is enabled in Windows)&lt;/p&gt;&#xA;" OwnerUserId="23181" LastActivityDate="2021-10-21T20:04:30.463" Title="Dark theme on supported websites?" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24977" PostTypeId="2" ParentId="24965" CreationDate="2020-06-19T14:08:43.967" Score="0" Body="&lt;p&gt;elementary OS è progettato proprio per non avere icone sul desktop, è una filosofia loro. Ti consiglio di cambiare distribuzione onde evitare di perdere tempo per far funzionare una cosa che magari ne rompe altre tre. ;)&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-06-19T14:08:43.967" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24978" PostTypeId="2" ParentId="24947" CreationDate="2020-06-19T14:14:22.537" Score="1" Body="&lt;p&gt;I used Softmaker FreeOffice for quite some time, but it was quite laggy when backspacing a lot of text, typing and doing very basic tasks, really. And I have a powerful hardware, so it was not my fault.&lt;/p&gt;&#xA;&lt;p&gt;I then moved to OnlyOffice, quite good even if not perfect: it does not integrate well with the rest of the OS and had a bare bone selection of fonts.&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-06-19T14:14:22.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24979" PostTypeId="2" ParentId="24947" CreationDate="2020-06-19T15:27:12.337" Score="0" Body="&lt;p&gt;I personally use microsoft office 2007 on crossover linux or wps office 2016&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2020-06-19T15:27:12.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24980" PostTypeId="2" ParentId="24636" CreationDate="2020-06-19T18:23:30.513" Score="0" Body="&lt;p&gt;I changed font size to minimal in settings.&#xA;My display support resolution 1024x720 only.&lt;/p&gt;&#xA;&lt;p&gt;Update:&#xA;Settings -&amp;gt; Desktop -&amp;gt; View (maybe) -&amp;gt; Text size.&lt;/p&gt;&#xA;&lt;p&gt;Sorry, my system language is russian. I am so lazy for change.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tkFxx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tkFxx.png&quot; alt=&quot;Settings - Desktop&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/UVniI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UVniI.png&quot; alt=&quot;View - Text Size&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23261" LastEditorUserId="23261" LastEditDate="2020-06-21T15:11:02.530" LastActivityDate="2020-06-21T15:11:02.530" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="24981" PostTypeId="2" ParentId="24947" CreationDate="2020-06-19T18:31:56.900" Score="1" Body="&lt;p&gt;I can use any office application like MS Office, LibreOffice, Google Suite and other.&#xA;But favourite is LibreOffice  Writer, Google Doc and Sheet.&lt;/p&gt;&#xA;" OwnerUserId="23261" LastActivityDate="2020-06-19T18:31:56.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24983" PostTypeId="2" ParentId="24935" CreationDate="2020-06-19T21:32:55.857" Score="0" Body="&lt;p&gt;Quick tile worked for me too, several installation options available, with more detail at &lt;a href=&quot;https://ssokolow.com/quicktile/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ssokolow.com/quicktile/&lt;/a&gt; in addition to the git hub site mentioned above.&lt;/p&gt;&#xA;" OwnerUserId="22699" LastActivityDate="2020-06-19T21:32:55.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24984" PostTypeId="2" ParentId="24515" CreationDate="2020-06-20T02:16:42.777" Score="3" Body="&lt;h1&gt;&lt;strong&gt;Hello!&lt;/strong&gt;&lt;/h1&gt;&#xA;&lt;p&gt;I was able to resolve this issue by downloading the application source code from the official repository on GitHub &lt;em&gt;(you can find it &lt;a href=&quot;https://github.com/elementary/calendar&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;)&lt;/em&gt;, altering a line from the css file responsible for the style of events and reinstalling the application from this source.&lt;/p&gt;&#xA;&lt;p&gt;This is how it looks now&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8YAWi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8YAWi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Step by step&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;When you download the source, extract to any location&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open the file &lt;code&gt;/calendar-master/data/style/AgendaEventRow.css&lt;/code&gt; in any text editor&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The first block of code should be:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;.event {&#xA;    background: alpha(@accent_color, 0.15);&#xA;    border-radius: 3px;&#xA;    color: shade(@accent_color, 0.65);&#xA;    padding: 6px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You'll have to alter both the &lt;code&gt;background&lt;/code&gt; and the &lt;code&gt;color&lt;/code&gt; attribute&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;In my case I altered to this:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;.event {&#xA;    background: alpha(@accent_color, 0.75);&#xA;    border-radius: 3px;&#xA;    color: shade(@accent_color, 0.35);&#xA;    padding: 6px;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;But you can alter to whatever you like&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now all you need to do is install it.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Following the README.md file from the source package:&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Make sure you have all the dependencies installed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install libchamplain-0.12-dev libchamplain-gtk-0.12-dev libclutter-1.0-dev libecal1.2-dev libedataserverui1.2-dev libfolks-dev libgee-0.8-dev libgeocode-glib-dev libgeoclue-2-dev libglib2.0-dev libgranite-dev libgtk-3-dev libical-dev meson valac&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;You can run this to install all the dependencies&lt;/p&gt;&#xA;&lt;p&gt;With the dependencies met, you now have to compile it using meson&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;In the &lt;code&gt;calendar-master&lt;/code&gt; folder run&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;meson build --prefix=/usr&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;cd build&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;ninja&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;This will compile the source code&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;And finally inside the &lt;code&gt;build&lt;/code&gt; folder run:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;sudo ninja install&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;*Take note that, you don't have to uninstall the current calendar in other to install it from source, however the new installation will override the current one.&lt;/p&gt;&#xA;&lt;p&gt;*If you want to remove the colors from the background entirely, you can follow this solution from user &amp;quot;thomsch98&amp;quot; on a GitHub thread about the same issue.&lt;/p&gt;&#xA;&lt;p&gt;You can find this solution &lt;em&gt;&lt;a href=&quot;https://github.com/elementary/calendar/issues/267&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="23262" LastActivityDate="2020-06-20T02:16:42.777" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24985" PostTypeId="1" AcceptedAnswerId="24987" CreationDate="2020-06-20T04:11:37.927" Score="0" ViewCount="407" Body="&lt;p&gt;So in Linux, the Discord's accent color is actually violet (or purple) but on Windows its &amp;quot;blurple&amp;quot;, is there anyway to get that accent color back?&lt;/p&gt;&#xA;" OwnerUserId="23181" LastActivityDate="2020-06-20T12:52:05.397" Title="Changing Discord's (and maybe other app's) accent color" Tags="|color|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24986" PostTypeId="2" ParentId="23894" CreationDate="2020-06-20T12:44:25.077" Score="0" Body="&lt;p&gt;I just run&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;without su permission&lt;/p&gt;&#xA;&lt;p&gt;and the annoying red dot is no more.&lt;/p&gt;&#xA;" OwnerUserId="23264" LastActivityDate="2020-06-20T12:44:25.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24987" PostTypeId="2" ParentId="24985" CreationDate="2020-06-20T12:52:05.397" Score="0" Body="&lt;p&gt;Linux is customizable, so &lt;a href=&quot;https://plusinsta.github.io/discord-plus/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://plusinsta.github.io/discord-plus/&lt;/a&gt; download any theme and edit it. There is a lot of themes for discord. It is time to learn how to customize.&lt;/p&gt;&#xA;&lt;p&gt;One more search in Google: &lt;a href=&quot;https://github.com/xCuri0/discordcolor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/xCuri0/discordcolor&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;By the way this is Elementary OS forum. Discord is not a part of any Linux distro.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-20T12:52:05.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24988" PostTypeId="2" ParentId="23894" CreationDate="2020-06-20T13:15:37.977" Score="0" Body="&lt;p&gt;I tried command line with no luck then I ran Gnome software updater and it found openh264 from flathub to update, so I assume Med Fadil's solution is another way of doing this.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-06-20T13:15:37.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24989" PostTypeId="2" ParentId="23894" CreationDate="2020-06-20T14:34:19.577" Score="3" Body="&lt;pre&gt;&lt;code&gt;flatpak update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;fixed it for me as well&lt;/p&gt;&#xA;" OwnerUserId="22662" LastActivityDate="2020-06-20T14:34:19.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24990" PostTypeId="2" ParentId="24809" CreationDate="2020-06-20T14:39:05.377" Score="0" Body="&lt;p&gt;Same here, allthough it was like this before 5.1.4 for me I think.&lt;/p&gt;&#xA;&lt;p&gt;Other people have the same problem: &lt;a href=&quot;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-pantheon-shell/issues/219&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm trying to figure out how to troubleshoot this.&lt;/p&gt;&#xA;" OwnerUserId="22662" LastActivityDate="2020-06-20T14:39:05.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24992" PostTypeId="1" CreationDate="2020-06-20T16:50:37.570" Score="0" ViewCount="41" Body="&lt;p&gt;I have a &lt;strong&gt;DELL Inspiron 15 3000&lt;/strong&gt; and, when i am in the Installation Type windows, I just see my USB stick and not my SSD in the devices.&lt;/p&gt;&#xA;&lt;p&gt;How can i install elementary on my SSD ?&lt;/p&gt;&#xA;&lt;p&gt;Thx for answering.&lt;/p&gt;&#xA;" OwnerUserId="23265" LastActivityDate="2024-03-06T11:02:45.257" Title="Solid State Drive not in the drive disk" Tags="|dell|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24993" PostTypeId="2" ParentId="24967" CreationDate="2020-06-20T17:10:02.570" Score="0" Body="&lt;p&gt;&lt;strong&gt;GNOME Disks&lt;/strong&gt; or &lt;strong&gt;Gparted&lt;/strong&gt; should help. For details, read the following page.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;How to rename partitions?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/276911/how-to-rename-partitions&quot;&gt;https://askubuntu.com/questions/276911/how-to-rename-partitions&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18318" LastActivityDate="2020-06-20T17:10:02.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24995" PostTypeId="1" CreationDate="2020-06-21T00:18:20.137" Score="0" ViewCount="39" Body="&lt;p&gt;Works fine with the latest Ubuntu. I found this on another search:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The Broadcom wifi chipset requires a proprietary driver to work.&lt;/p&gt;&#xA;&lt;p&gt;Run these commands to install and enable it.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install bcmwl-kernel-source&#xA;sudo modprobe -r ideapad_laptop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;But no joy- no wifi.&lt;/p&gt;&#xA;&lt;p&gt;lsusb says broadcom BCM2045B (BCD-2.1)&lt;/p&gt;&#xA;&lt;p&gt;Where can I find driver?&lt;/p&gt;&#xA;" OwnerUserId="23271" LastEditorUserId="26" LastEditDate="2020-07-03T04:39:23.887" LastActivityDate="2020-07-03T04:39:23.887" Title="Lenovo T420S WiFi where to find driver?" Tags="|wifi|lenovo|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="24996" PostTypeId="1" CreationDate="2020-06-21T01:06:54.577" Score="0" ViewCount="57" Body="&lt;p&gt;So I logged in and this is what I have. I don't have any clue why this happening.&#xA;The GTK theme are like Adwaita, the icons are Adwaita too, the shortucts don't work...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7EazX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7EazX.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;...even that Debian logo is weird&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZfTzg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZfTzg.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT: ok i actually ran io.elementary.onboarding before i restarted it, how can i fix it?&lt;/p&gt;&#xA;" OwnerUserId="23272" LastActivityDate="2024-03-02T17:02:55.293" Title="Broken theme, icons and shortcuts" Tags="|desktop|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24997" PostTypeId="2" ParentId="16812" CreationDate="2020-06-21T03:22:12.503" Score="0" Body="&lt;p&gt;Basically, it appears the first launch of a new install got confused by existing logins.&lt;/p&gt;&#xA;&lt;p&gt;Ensure you are not logged into zoom elsewhere. Perhaps, still logged into a previous version but not tested; the zoom installer on Mac asked me to quit zoom to continue installing on Mac. This logging out was also essential for first launch of my Elementary OS install.&lt;/p&gt;&#xA;&lt;p&gt;After much trial and error attempting to upgrade a previously-working zoom, using apt, gdebi, and eddy, the best I achieved was the zoom icon under Applications/Internet; launching put the zoom icon in the dock for about 30s, then gone without an interface.&lt;/p&gt;&#xA;&lt;p&gt;I was searching for advice on computer #2 while still logged into zoom client. When I logged out on #2, #1 launch coughed up a dialogue warning me I was logged into another client. I quit #2, relaunched #1, and now #1 appears to work as expected. I found this odd enough to mention but I don't have chutzpah points to comment. The following dialogue appears the same for Elementary and Mac.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gApim.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gApim.png&quot; alt=&quot;logout warning&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2020-06-21T03:22:12.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24998" PostTypeId="2" ParentId="19610" CreationDate="2020-06-21T06:23:54.353" Score="0" Body="&lt;p&gt;Turn off fast boot inside power management in Windows.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-21T06:23:54.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="24999" PostTypeId="2" ParentId="24996" CreationDate="2020-06-21T06:31:49.207" Score="0" Body="&lt;p&gt;I explained this on Facebook group. &lt;a href=&quot;https://www.facebook.com/groups/elementary.talk/permalink/1901761249958898/?app=fbl&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.facebook.com/groups/elementary.talk/permalink/1901761249958898/?app=fbl&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So, as you can see it depends on what set you are using. You can change the logo in set by replace file.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-21T06:31:49.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25000" PostTypeId="2" ParentId="24840" CreationDate="2020-06-21T12:15:25.093" Score="0" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash snd_hda_intel.dmic_detect=0 psmouse.elantech_smbus=0&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And save the change. Exit gedit.&lt;/p&gt;&#xA;&lt;p&gt;Then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and Reboot.&lt;/p&gt;&#xA;&lt;p&gt;You can check if soundcards are detected with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;aplay -l&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you do not have gedit, you can use nano instead gedit.&lt;/p&gt;&#xA;&lt;p&gt;If&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;psmouse.elantech_smbus=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;will not work, remove it and instead add this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;i8042.nomux=1 i8042.reset&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Solution with i8042 taken from here: &lt;a href=&quot;https://unix.stackexchange.com/questions/28736/what-does-the-i8042-nomux-1-kernel-option-do-during-booting-of-ubuntu&quot;&gt;click&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-21T17:49:55.493" LastActivityDate="2020-06-21T17:49:55.493" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="25002" PostTypeId="1" CreationDate="2020-06-21T20:11:06.810" Score="0" ViewCount="143" Body="&lt;p&gt;&lt;strong&gt;Unknown Encoder &amp;quot;llibmp3lame&amp;quot;&lt;/strong&gt;&#xA;I get this error when i try to do anything audio related, like stripping audio for a video in youtube dl, or using a spotdl (A spotify downloader) to download music.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;Draig@ibk:~/Documents$ spotdl -s &amp;quot;No good Nina&amp;quot;&#xA;INFO: Downloading &amp;quot;No good Nina&amp;quot;&#xA;INFO: Downloading to &amp;quot;The Butlers - No Good Nina.mp3&amp;quot;&#xA;  0%|                                | 0/4464KiB [00:00&amp;lt;?, ?KiB/s]Unknown encoder 'libmp3lame'&#xA;  0%|                     | 16/4464KiB [00:00&amp;lt;00:01, 3356.11KiB/s]&#xA;Traceback (most recent call last):&#xA;  File &amp;quot;/home/Draig/.local/bin/spotdl&amp;quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    sys.exit(main())&#xA;  File &amp;quot;/home/Draig/.local/lib/python3.6/site-packages/spotdl/command_line/__main__.py&amp;quot;, line 25, in main&#xA;    exitcode = spotdl_handler.match_arguments()&#xA;  File &amp;quot;/home/Draig/.local/lib/python3.6/site-packages/spotdl/command_line/core.py&amp;quot;, line 69, in match_arguments&#xA;    self.download_track(track)&#xA;  File &amp;quot;/home/Draig/.local/lib/python3.6/site-packages/spotdl/command_line/core.py&amp;quot;, line 233, in download_track&#xA;    return self.download_track_from_metadata(metadata)&#xA;  File &amp;quot;/home/Draig/.local/lib/python3.6/site-packages/spotdl/command_line/core.py&amp;quot;, line 334, in download_track_from_metadata&#xA;    encoder=encoder,&#xA;  File &amp;quot;/home/Draig/.local/lib/python3.6/site-packages/spotdl/track.py&amp;quot;, line 59, in download_while_re_encoding&#xA;    process.stdin.write(chunk)&#xA;BrokenPipeError: [Errno 32] Broken pipe&#xA;&#xA;Draig@ibk:~/Documents$ youtube-dl -x --audio-format mp3 https://www.youtube.com/watch?v=svahuHajzY4&#xA;[youtube] svahuHajzY4: Downloading webpage&#xA;[download] Destination: Dennis Lloyd - Alien (Lyrics)-svahuHajzY4.webm&#xA;[download] 100% of 2.30MiB in 00:00&#xA;[ffmpeg] Destination: Dennis Lloyd - Alien (Lyrics)-svahuHajzY4.mp3&#xA;ERROR: audio conversion failed: Unknown encoder 'libmp3lame'&#xA;Draig@ibk:~/Documents$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Its driving me nuts, please help out&#xA;Also new to stackexchange, let me know if something is off.&#xA;Thankyou&lt;/p&gt;&#xA;" OwnerUserId="20083" LastActivityDate="2024-03-07T01:05:35.640" Title="How do i re-install or fix &quot;libmp3lame&quot;?" Tags="|audio|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25004" PostTypeId="1" CreationDate="2020-06-22T14:57:38.537" Score="0" ViewCount="51" Body="&lt;p&gt;WiFi card is no go with Elementary OS. Works fine with Ubuntu so know card is ok.&lt;/p&gt;&#xA;" OwnerUserId="23271" LastActivityDate="2024-03-05T02:01:55.247" Title="Wifi driver Lenovo T420s - Where to find find driver?" Tags="|wifi|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25005" PostTypeId="1" CreationDate="2020-06-22T18:07:52.083" Score="2" ViewCount="229" Body="&lt;p&gt;I had installed AWS Workspaces, a .msi file through wine. It was installed successfully but didn't run the way I had expected so I uninstalled it through wine uninstaller but the icon still appears on the application menu. How can I remove it from there? I have AppEditor but I don't want to just hide it, I want to know why it is there even after uninstalling and how I can remove it permanently. From my end I have gone into .wine folder in home directory and removed all folders related to this app. Am I missing something?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QDK6h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QDK6h.png&quot; alt=&quot;Here is the image&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23290" LastActivityDate="2021-08-23T12:12:01.173" Title="Need help to delete icons from Applications Menu" Tags="|release-hera|applications|wine|menu|folder|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25006" PostTypeId="1" CreationDate="2020-06-22T21:27:51.347" Score="0" ViewCount="109" Body="&lt;p&gt;The problem is: PCIe Board with RTL8812AE don't work properly, maybe missing some firmware rtl8812aefw.bin and rtl8812aefw_wowlan.bin ...&#xA;How to copy both files to /lib/firmware/rtlwifi ??&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="23291" LastActivityDate="2020-06-23T19:52:05.890" Title="Wi-Fi With some problems" Tags="|settings|wifi|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25008" PostTypeId="1" AcceptedAnswerId="25062" CreationDate="2020-06-23T02:30:27.980" Score="0" ViewCount="179" Body="&lt;p&gt;What did i wrong?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mohn@brake-old:~/Dropbox$ io.elementary.files&#xA;** Message: 09:11:14.490: Application.vala:50: Report any issues/bugs you might find to https://github.com/elementary/files/issues&#xA;&#xA;** (io.elementary.files:3739): WARNING **: 09:11:14.528: PluginManager.vala:134: Failed to load module from path '/usr/lib/x86_64-linux-gnu/io.elementary.files/plugins/libpantheon-files-dropbox.so': libpantheon-files-core.so.0: невозможно открыть разделяемый объектный файл: Нет такого файла или каталога&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;File not found? Realy?&#xA;How fix it?&lt;/p&gt;&#xA;" OwnerUserId="23261" LastActivityDate="2020-07-31T12:20:54.567" Title="Dropbox plug-in dont work. 5.1.5 Hera" Tags="|release-hera|pantheon-files|dropbox|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25010" PostTypeId="2" ParentId="25005" CreationDate="2020-06-23T03:30:53.770" Score="3" Body="&lt;p&gt;These are stored under &lt;code&gt;~/.local/share/applications/wine/Programs&lt;/code&gt;. Go and delete 'em.&lt;/p&gt;&#xA;" OwnerUserId="3412" LastActivityDate="2020-06-23T03:30:53.770" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25011" PostTypeId="1" CreationDate="2020-06-23T10:57:28.563" Score="0" ViewCount="35" Body="&lt;p&gt;Since I installed Gimp 2.10.20 via Flatpack a few days ago, my AppCenter is constantly telling me I have updates, but when I open up the AppCenter and go to Installed, there are no updates showing (see attached image), I've even done sudo apt update followed by sudo apt full-upgrade and it says All packages are up-to-date. My question is, are there updates or is this a quirk of AppCenter and Flatpacks? &lt;a href=&quot;https://i.stack.imgur.com/MHoXB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MHoXB.png&quot; alt=&quot;AppCenter&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23295" LastActivityDate="2020-06-23T10:57:28.563" Title="AppCentre Updates Issue Hera" Tags="|release-hera|appcenter|flatpak|" AnswerCount="0" CommentCount="2" ClosedDate="2020-06-26T08:47:22.147" ContentLicense="CC BY-SA 4.0" />
  <row Id="25012" PostTypeId="1" AcceptedAnswerId="25013" CreationDate="2020-06-23T15:11:13.743" Score="0" ViewCount="136" Body="&lt;p&gt;I've read most of the answers and nothing really seems to be related to case except force shut down and cleaning up &lt;code&gt;kern.log&lt;/code&gt; and &lt;code&gt;syslog&lt;/code&gt; files manually on next boot. Happened a few times already. I've tried to take a sample of 20000 lines from &lt;code&gt;kern.log&lt;/code&gt;(which is almost 40GB) and uploaded &lt;a href=&quot;https://drive.google.com/file/d/1mGIrtAJCrV_Ru94QLK-5x58F1mBoaxQo/view?usp=sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. While running below script:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;for log in test;  &#xA;  echo &amp;quot;${log} :&amp;quot;&#xA;  sed -e 's/\[[^]]\+\]//' -e 's/.*[0-9]\{2\}:[0-9]\{2\}:[0-9]\{2\}//' ${log} \&#xA;  | sort | uniq -c | sort -hr | head -10&#xA;done&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I get the following lines:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; 559  npc kernel:   worker_thread+0x34/0x410&#xA;    559  npc kernel:  wlp5s0:  Failed check-sdata-in-driver check, flags: 0x4&#xA;    559  npc kernel:  WARNING: CPU: 3 PID: 19976 at /build/linux-hwe-pGQy9q/linux-hwe-5.3.0/net/mac80211/driver-ops.h:19 drv_sta_state+0x165/0x400 [mac80211]&#xA;    559  npc kernel:   sta_info_move_state+0x284/0x360 [mac80211]&#xA;    559  npc kernel:   __sta_info_flush+0x139/0x1b0 [mac80211]&#xA;    559  npc kernel:   __sta_info_destroy_part2+0x36/0x1a0 [mac80211]&#xA;    559  npc kernel:   ret_from_fork+0x35/0x40&#xA;    559  npc kernel:   ? _raw_spin_unlock_bh+0x1e/0x20&#xA;    559  npc kernel:   ? process_one_work+0x3f0/0x3f0&#xA;    559  npc kernel:   process_one_work+0x1fd/0x3f0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;My system details:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OS: elementary OS Hera 5.1.5&#xA;CPU: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz&#xA;DISK: 150GB SSD (partition-dual boot w/ windows10)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Additional WLAN related hwinfo, which could be relevant:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;*-network&#xA;                description: Wireless interface&#xA;                product: Wireless 8265 / 8275&#xA;                vendor: Intel Corporation&#xA;                physical id: 0&#xA;                bus info: pci@0000:05:00.0&#xA;                logical name: wlp5s0&#xA;                version: 78&#xA;                serial: 48:a4:72:xx:xx:xx&#xA;                width: 64 bits&#xA;                clock: 33MHz&#xA;                capabilities: bus_master cap_list ethernet physical wireless&#xA;                configuration: broadcast=yes driver=iwlwifi driverversion=5.3.0-59-generic firmware=36.77d01142.0 ip=192.168.43.85 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;                resources: irq:132 memory:f1000000-f1001fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When it happens, suddenly the CPU is at 30-40%, and the next thing I know that no space on deceive left.&lt;/p&gt;&#xA;" OwnerUserId="17852" LastActivityDate="2020-07-23T20:00:45.117" Title="kern.log and syslog grow 40+ GB in few minutes" Tags="|release-hera|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25013" PostTypeId="2" ParentId="25012" CreationDate="2020-06-23T15:38:31.973" Score="0" Body="&lt;p&gt;It looks like you are using hwe kernel. Can you remove it together with headers and then update the grub and also initramfs?&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T15:38:31.973" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="25014" PostTypeId="2" ParentId="25012" CreationDate="2020-06-23T19:19:43.550" Score="0" Body="&lt;p&gt;&lt;strong&gt;How to upgrade Elementary OS to the 5.7.0 kernel.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install necessary packages&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential libncurses-dev bison flex libssl-dev libelf-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;To check hardware&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;To check missing firmware&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This step is important, because it shows missing firmware.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Make directories for firmware&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mkdir /home/username/Downloads/kernel&#xA;mkdir /home/username/Downloads/amdgpu&#xA;mkdir /home/username/Downloads/i915&#xA;mkdir /home/username/Downloads/rtl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;To get rid of missing firmware errors for amdgpu&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/amdgpu&#xA;wget https://github.com/M-Bab/linux-kernel-amdgpu-binaries/files/4124959/firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;unzip firmware-radeon-ucode-rock_2.110_all.deb.zip&#xA;sudo dpkg -i firmware-radeon-ucode-rock_2.110_all.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Or use eddy to install this deb&lt;/p&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/M-Bab/linux-kernel-amdgpu-binaries/issues/82&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;To get rid of missing firmware errors for i915&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/i915&#xA;git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git&#xA;sudo cp -R /linux-firmware/i915/* /lib/firmware/i915/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;To get rid of missing firmware errors for rtl (Realtek LAN and Wi-Fi adapters in my DELL)&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/rtl&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8168fp-3.fw&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8125a-3.fw&#xA;sudo cp rtl8168fp-3.fw /lib/firmware/rtl_nic &#xA;sudo cp rtl8125a-3.fw /lib/firmware/rtl_nic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Download kernel 5.7.0&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/kernel&#xA;wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.7.tar.xz&#xA;tar -xf linux-5.7.tar.xz&#xA;cd linux-5.7&#xA;cp -v /boot/config-$(uname -r) .config&#xA;make menuconfig &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;save config and then exit.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Use 4 core/thread - if your processor have 4 cores&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;make -j 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Use 8 core/thread - if your processor have 8 cores&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;make -j 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type below commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo make modules_install &#xA;sudo make install &#xA;sudo update-initramfs -c -k 5.7.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;ignore these errors below, just because those three bin files are not made yet&lt;/strong&gt;&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_ta.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_dmcu.bin for module amdgpu&lt;/p&gt;&#xA;&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo reboot&#xA;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;To check errors after reboot:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -b&#xA;sudo dmesg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T19:19:43.550" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25015" PostTypeId="2" ParentId="25012" CreationDate="2020-06-23T19:26:38.777" Score="0" Body="&lt;p&gt;List below file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/logrotate.d/rsyslog&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;should contain this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/var/log/syslog&#xA;{&#xA;    rotate 7&#xA;    daily&#xA;    missingok&#xA;    notifempty&#xA;    delaycompress&#xA;    compress&#xA;    postrotate&#xA;            /usr/lib/rsyslog/rsyslog-rotate&#xA;    endscript&#xA;}&#xA;&#xA;/var/log/mail.info&#xA;/var/log/mail.warn&#xA;/var/log/mail.err&#xA;/var/log/mail.log&#xA;/var/log/daemon.log&#xA;/var/log/kern.log&#xA;/var/log/auth.log&#xA;/var/log/user.log&#xA;/var/log/lpr.log&#xA;/var/log/cron.log&#xA;/var/log/debug&#xA;/var/log/messages&#xA;{&#xA;    rotate 4&#xA;    weekly&#xA;    missingok&#xA;    notifempty&#xA;    compress&#xA;    delaycompress&#xA;    sharedscripts&#xA;    postrotate&#xA;            /usr/lib/rsyslog/rsyslog-rotate&#xA;    endscript&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If it does not contain the above , edit it and replace&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/logrotate.d/rsyslog&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then force the logrotate manually:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo logrotate --force  /etc/logrotate.d/rsyslog&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If it will show similar error:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;error: skipping &amp;quot;/var/log/syslog&amp;quot; because parent directory has insecure permissions (It's world writable or writable by group which is not &amp;quot;root&amp;quot;) Set &amp;quot;su&amp;quot; directive in config file to tell logrotate which user/group should be used for rotation.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Then type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 755 /var/log/ &amp;amp;&amp;amp; sudo chown root:root /var/log/&#xA;sudo chmod 755 /var &amp;amp;&amp;amp; sudo chown root:root /var&#xA;sudo logrotate --force  /etc/logrotate.d/rsyslog&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-23T19:34:30.230" LastActivityDate="2020-06-23T19:34:30.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25016" PostTypeId="2" ParentId="25012" CreationDate="2020-06-23T19:44:36.557" Score="0" Body="&lt;p&gt;By the way the bash script is wrong. Should be:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;for log in test; do&#xA;  echo &amp;quot;${log} :&amp;quot;&#xA;  sed -e 's/\[[^]]\+\]//' -e 's/.*[0-9]\{2\}:[0-9]\{2\}:[0-9]\{2\}//' ${log} \&#xA;  | sort | uniq -c | sort -hr | head -10&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tested it, but have no idea what test in your case is.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T19:44:36.557" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25017" PostTypeId="2" ParentId="25006" CreationDate="2020-06-23T19:52:05.890" Score="1" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Provide the result of this command and I can help.&lt;/p&gt;&#xA;&lt;p&gt;The dafault way is to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /home/username/Downloads/rtl&#xA;cd /home/username/Downloads/rtl/&#xA;wget http://anduin.linuxfromscratch.org/sources/linux-firmware/rtlwifi/rtl8812aefw.bin&#xA;wget http://anduin.linuxfromscratch.org/sources/linux-firmware/rtlwifi/rtl8812aefw_wowlan.bin&#xA;sudo cp rtl8812aefw.bin /lib/firmware/rtlwifi&#xA;sudo cp rtl8812aefw_wowlan.bin /lib/firmware/rtlwifi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T19:52:05.890" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25018" PostTypeId="2" ParentId="25004" CreationDate="2020-06-23T19:57:27.657" Score="0" Body="&lt;p&gt;What commands typed in terminal show?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;sudo lsusb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can install iwlwifi driver from the App Center.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T19:57:27.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25019" PostTypeId="2" ParentId="18246" CreationDate="2020-06-23T20:11:36.930" Score="0" Body="&lt;p&gt;Actually,it is not even necessary to remove older kernel. Just select during boot in grub the older kernel, run it, log to system, open terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Additionally, what I recommend, is to check kernels this way:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --list | grep linux-image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u -k 5.0.4-generic &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(use the version of the kernel which is damaged and shows kernel panic)&lt;/p&gt;&#xA;&lt;p&gt;Then update grub&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If sudo update-grub will not work, then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo grub-mkconfig -o /boot/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-23T20:11:36.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25021" PostTypeId="1" CreationDate="2020-06-24T00:02:06.560" Score="0" ViewCount="137" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tEXN3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tEXN3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;wingpanel icons problem.&lt;strong&gt;strong text&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;im having a problem when i try to apply flattery icons to my elementary os my wingpanel icons become so large i want to know if there is a tutorial how to make it small or i want to use elementary wingpanel icons.&lt;/p&gt;&#xA;" OwnerUserId="23298" LastActivityDate="2024-03-05T13:02:00.180" Title="wingpanel in elementary os [hera] become large after i apply icons" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25022" PostTypeId="2" ParentId="21532" CreationDate="2020-06-24T05:05:59.293" Score="1" Body="&lt;p&gt;Developers who make Elementary OS rather do not use this forum, so complaining has totally no sense, because noone is able to solve the issue permanently. You can remove lightdm. If you will ask Google how to remove lightdm in Elementary OS Hera or Juno, you will find the answer. Besides the Elementary OS is Ubuntu/Debian based so solutions from these distros should work, but not always.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge lightdm&#xA;sudo apt install pantheon-xsession-settings&#xA;cd&#xA;sudo rm -rf .Xauthority&#xA;sudo nano /etc/gdm3/custom.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;WaylandEnable=true &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;WaylandEnable=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;save changes and exit nano. Then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-24T05:17:06.650" LastActivityDate="2020-06-24T05:17:06.650" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25023" PostTypeId="2" ParentId="25021" CreationDate="2020-06-24T05:22:48.873" Score="0" Body="&lt;p&gt;Actually there is no solution for this, because the icon set has larger icons. So eventually you can resize them one by one in Inkscape. Or ask the developer of this icon set to make smaller version for Elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/cbrnix/Flatery&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/cbrnix/Flatery&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T05:22:48.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25024" PostTypeId="2" ParentId="22179" CreationDate="2020-06-24T05:29:47.007" Score="0" Body="&lt;p&gt;Remove iwlwifi driver from App Center.&#xA;Then open terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Provide the result of this command.&#xA;I will be able to guide you which firmware for Wi-Fi adapter is needed.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T05:29:47.007" CommentCount="19" ContentLicense="CC BY-SA 4.0" />
  <row Id="25027" PostTypeId="2" ParentId="24740" CreationDate="2020-06-24T07:49:19.077" Score="0" Body="&lt;p&gt;Hi I had a similar problem. (The Device showing connected but not appearing in the sound settings and &lt;em&gt;then disconnecting&lt;/em&gt;(additional problem))&lt;/p&gt;&#xA;&lt;p&gt;I referred to &lt;a href=&quot;https://superuser.com/questions/1151329/elementary-os-bluetooth-not-working&quot;&gt;this answer&lt;/a&gt; and the solution &lt;code&gt;sudo apt-get install blueman&lt;/code&gt; worked for me. Figured out that it might help you out.&lt;/p&gt;&#xA;&lt;p&gt;Note to Mods: This is &lt;strong&gt;not an answer&lt;/strong&gt; but I don't have enough reps to comment, hence you may add it as comment and remove it.&lt;/p&gt;&#xA;" OwnerUserId="23299" LastActivityDate="2020-06-24T07:49:19.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25029" PostTypeId="1" CreationDate="2020-06-24T11:50:38.410" Score="0" ViewCount="77" Body="&lt;p&gt;I still have a problem with the native eOS calendar app.&#xA;By now, I have figured out that eOS will give me notifications of my events, bubt they appear approx. 2 hours after the start of the event. I even tell the app to specifically give me a notification when the event starts.&lt;/p&gt;&#xA;&lt;p&gt;I think, that somehow my local time or somewhat related must be off, since that's the only possible reason I can come up with to produce such a weird error.&lt;/p&gt;&#xA;&lt;p&gt;Now, I have tried to reset the time of my machine (ThinkPad X220) with&#xA;&lt;a href=&quot;https://i.stack.imgur.com/sA7la.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sA7la.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;br /&gt;&#xA;and set it to automatic, but nothing has changed.&lt;/p&gt;&#xA;&lt;p&gt;It might be noteworthy thatI disabled all other notifications, except for &amp;quot;calendar&amp;quot; and &amp;quot;other&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;I made another post regarding this topic, but I have now found out that the problem lies somewhere else. I ask politely for someone to delete my older post (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24887/no-notifications-from-calendar-application&quot;&gt;no notifications from calendar application&lt;/a&gt;), since it's not of any use anymore.&lt;/p&gt;&#xA;&lt;p&gt;EDIT: I have noticed that the events are saved differently in and out of the calendar app, see test and test2 event in notification center and inside the app itself.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PwlSd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PwlSd.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23090" LastEditorUserId="23090" LastEditDate="2020-06-25T19:53:05.907" LastActivityDate="2024-03-07T05:04:00.467" Title="Delayed event notifications in native calendar app" Tags="|calendar|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25030" PostTypeId="1" CreationDate="2020-06-24T13:21:15.503" Score="0" ViewCount="199" Body="&lt;p&gt;I'm newbie with Elementary OS, and I really enjoying the speed and stability of the OS.&#xA;The only thing that it's really annoying for me is the webcam and videoconferencing software with my Surface device, so I planned to install &amp;quot;Iriun Webcam&amp;quot; in order to use my cellphone camera as webcam and workaround the current limitations.&lt;/p&gt;&#xA;&lt;p&gt;v4l2loopback is required to create a virtual video device in order to map to cellphone cam.&lt;/p&gt;&#xA;&lt;p&gt;First problem: v4l2loopback version (0.10) in Elementary repository is outdated and incompatible with kernel 5.x.&#xA;To solve, I downloaded, compiled, and loaded the module to kernel but it seems to be not working.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;My video devices BEFORE modprobe&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;**$ ls -ltrh /dev/video**&#xA;crw-rw----+ 1 root video 81, 1 Jun 23 07:22 /dev/video1&#xA;crw-rw----+ 1 root video 81, 2 Jun 23 07:22 /dev/video2&#xA;crw-rw----+ 1 root video 81, 0 Jun 23 07:22 /dev/video0 &#xA;crw-rw----+ 1 root video 81, 3 Jun 23 07:22 /dev/video3 &#xA;crw-rw----+ 1 root video 81, 8 Jun 23 07:22 /dev/video4 &#xA;crw-rw----+ 1 root video 81, 12 Jun 23 07:22 /dev/video8 &#xA;crw-rw----+ 1 root video 81, 10 Jun 23 07:22 /dev/video6 &#xA;crw-rw----+ 1 root video 81, 13 Jun 23 07:22 /dev/video9 &#xA;crw-rw----+ 1 root video 81, 14 Jun 23 07:22 /dev/video10 &#xA;crw-rw----+ 1 root video 81, 11 Jun 23 07:22 /dev/video7 &#xA;crw-rw----+ 1 root video 81, 9 Jun 23 07:22 /dev/video5 &#xA;crw-rw----+ 1 root video 81, 15 Jun 23 07:22 /dev/video11 &#xA;crw-rw----+ 1 root video 81, 17 Jun 23 07:22 /dev/video13 &#xA;crw-rw----+ 1 root video 81, 16 Jun 23 07:22 /dev/video12&#xA;&#xA;**$ sudo modprobe v4l2loopback devices=2**&#xA;$ ls -ltrh /dev/video*&#xA;crw-rw----+ 1 root video 81, 1 Jun 23 07:22 /dev/video1&#xA;crw-rw----+ 1 root video 81, 2 Jun 23 07:22 /dev/video2&#xA;crw-rw----+ 1 root video 81, 0 Jun 23 07:22 /dev/video0&#xA;crw-rw----+ 1 root video 81, 3 Jun 23 07:22 /dev/video3&#xA;crw-rw----+ 1 root video 81, 8 Jun 23 07:22 /dev/video4&#xA;crw-rw----+ 1 root video 81, 12 Jun 23 07:22 /dev/video8&#xA;crw-rw----+ 1 root video 81, 10 Jun 23 07:22 /dev/video6&#xA;crw-rw----+ 1 root video 81, 13 Jun 23 07:22 /dev/video9&#xA;crw-rw----+ 1 root video 81, 14 Jun 23 07:22 /dev/video10&#xA;crw-rw----+ 1 root video 81, 11 Jun 23 07:22 /dev/video7&#xA;crw-rw----+ 1 root video 81, 9 Jun 23 07:22 /dev/video5&#xA;crw-rw----+ 1 root video 81, 15 Jun 23 07:22 /dev/video11&#xA;crw-rw----+ 1 root video 81, 17 Jun 23 07:22 /dev/video13&#xA;crw-rw----+ 1 root video 81, 16 Jun 23 07:22 /dev/video12&#xA;**crw-rw----+ 1 root video 81, 21 Jun 23 09:59 /dev/video15**&#xA;**crw-rw----+ 1 root video 81, 20 Jun 23 09:59 /dev/video14** &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;As you see above, the video devices has been created, but any application &amp;quot;see&amp;quot; the devices.&#xA;Iriunweb app says: &amp;quot;initialization failed. You may want to run sudo modprobe v4l2loopback exclusive_caps=1&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;&lt;p&gt;Is there anybody using 5.1 with surface book device?&lt;/p&gt;&#xA;&lt;p&gt;My Environment&lt;/p&gt;&#xA;&lt;p&gt;Hardware model: Surface Book 1&lt;/p&gt;&#xA;&lt;p&gt;Kernel version: 5.7.4-surface (github/linux-surface)&lt;/p&gt;&#xA;&lt;p&gt;Distribution: 5.1 Elementary OS&lt;/p&gt;&#xA;" OwnerUserId="23304" LastActivityDate="2024-03-07T21:09:01.110" Title="v4l2loopback on surface devices" Tags="|release-hera|webcam|surface-tablet|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25031" PostTypeId="2" ParentId="19605" CreationDate="2020-06-24T16:10:28.443" Score="0" Body="&lt;p&gt;Why the duck you want to install flash which you will have to remove with the end of the 2020 year? Flash will be banned and abandoned by Adobe. It will be no support, no patch and finally this format will die definitelly and will be erased from the Internet. Besides remove Epiphany.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge epiphany&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install Firefox which all Elementary OS developers are using, or Chromium at least. I recommend Vivaldi browser.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T16:10:28.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25032" PostTypeId="2" ParentId="25029" CreationDate="2020-06-24T16:13:28.957" Score="0" Body="&lt;p&gt;Type in terminal :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;timedatectl list-timezones&#xA;sudo timedatectl set-timezone &amp;lt;your_time_zone&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To verify type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo timedatectl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T16:13:28.957" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25033" PostTypeId="2" ParentId="25002" CreationDate="2020-06-24T16:33:35.727" Score="0" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge libmp3lame-dev&#xA;sudo apt autoremove&#xA;sudo apt autoclean&#xA;sudo apt install libmp3lame-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;eventually without -dev, I mean libmp3lame only. I do not remember the correct name.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T16:33:35.727" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25034" PostTypeId="2" ParentId="24840" CreationDate="2020-06-24T17:05:27.637" Score="0" Body="&lt;p&gt;&lt;code&gt;psmouse.elantech_smbus=0&lt;/code&gt; - this option does not work&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;i8042.nomux=1 i8042.reset&lt;/code&gt; - this option does not work&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo dmesg | grep -i elantech&lt;/code&gt; - does not execute a command&lt;/p&gt;&#xA;" OwnerUserId="23168" LastActivityDate="2020-06-24T17:05:27.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25038" PostTypeId="2" ParentId="25029" CreationDate="2020-06-24T20:18:46.890" Score="0" Body="&lt;p&gt;Type all commands in terminal to compile the calendar from source:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libchamplain-0.12-dev libchamplain-gtk-0.12-dev libclutter-1.0-dev libecal1.2-dev libedataserverui1.2-dev libfolks-dev libgee-0.8-dev libgeocode-glib-dev libgeoclue-2-dev libglib2.0-dev libgranite-dev libgtk-3-dev libical-dev meson valac&#xA;cd&#xA;cd /Downloads&#xA;wget https://github.com/elementary/calendar/archive/master.zip&#xA;unzip master.zip&#xA;cd calendar-master/&#xA;meson build --prefix=/usr&#xA;cd build&#xA;ninja&#xA;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-24T20:18:46.890" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25039" PostTypeId="1" CreationDate="2020-06-25T00:43:00.750" Score="1" ViewCount="127" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rnibK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rnibK.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;i was trying all solution in youtube, but no one solve my problem.. It's my first time using ementary os, so can someone help me please&lt;/p&gt;&#xA;" OwnerUserId="23308" LastActivityDate="2024-03-18T17:07:20.877" Title="dpkg: error processing package teamviewer (--install):" Tags="|code|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25040" PostTypeId="2" ParentId="24992" CreationDate="2020-06-25T02:23:57.623" Score="0" Body="&lt;p&gt;I have a Dell Precision 7530 that had the same issue. I had to go into the UEFI/BIOS and change the SATA settings from RAID to AHCI, even though I'm using an M.2 NVMe drive. Once I made that change and rebooted into the installation USB I was able to see the SSD and install the OS. Changing from RAID to AHCI may not allow you to boot into your Windows installation.&lt;/p&gt;&#xA;" OwnerUserId="23309" LastActivityDate="2020-06-25T02:23:57.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25042" PostTypeId="2" ParentId="25002" CreationDate="2020-06-25T17:16:47.443" Score="0" Body="&lt;p&gt;I ended up fixing it myself&#xA;The root of the problem was, even after uninstallation of ffmpeg, the ffmpeg which came with elementary os, was not purged. Some godsend guy somewhere on the internet suggested i locate ffmpeg and rename it to .old, after that i ended reinstalling a bunch of packages &amp;quot;individually&amp;quot;.&#xA;Eventually worked.&lt;/p&gt;&#xA;" OwnerUserId="20083" LastActivityDate="2020-06-25T17:16:47.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25045" PostTypeId="1" AcceptedAnswerId="25054" CreationDate="2020-06-25T21:37:10.957" Score="0" ViewCount="59" Body="&lt;p&gt;I am currently in the middle of a move and as part of that move I removed all devices from my laptop.&#xA;Previously connected devices were a monitor over HDMI, the charging cable, as well as a USB hub that was connected to a Keyboard, Mouse, External Hard drive, and a USB powered lamp.&#xA;While the device was shut down I disconnected all components and packed them away. The next time I started Elementary, several functions were not working anymore:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The Trackpad doesn't react. The USB mouse works.&lt;/li&gt;&#xA;&lt;li&gt;The HDMI monitor doesn't work anymore when I connected one the next time.&lt;/li&gt;&#xA;&lt;li&gt;There is absolutely no internet connection. Neither WIFI nor ethernet work. The options in the connectivity part of the settings only shows VPN and Proxy.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Notably, everything works perfectly as before on the dualbooted Windows 10.&lt;/p&gt;&#xA;&lt;p&gt;Some changes I made in the days leading up to the move:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Installed Wireguard (might impact internet functionality, but I uninstalled it already, with no change&lt;/li&gt;&#xA;&lt;li&gt;Installed several versions of DisplayLink drivers (might impact HDMI, but that's weeks ago, with no problem.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Any help is greatly appreciated. I have some uncommitted changes on the drive, so I hope we can find a solution that doesn't involve reinstalling the OS.&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&lt;p&gt;Kodos&lt;/p&gt;&#xA;" OwnerUserId="23314" LastActivityDate="2020-06-26T17:01:14.507" Title="Several Vital functions not working after some setup changes" Tags="|wifi|touchpad|internet|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25049" PostTypeId="1" AcceptedAnswerId="25058" CreationDate="2020-06-26T06:42:04.647" Score="0" ViewCount="109" Body="&lt;p&gt;I am new to Linux and I have doubts when installing programs in the Elementary operating system.&#xA;When I install a program (for example, using &amp;quot;snap&amp;quot;) it doesn't appear until after I restart the system. This is normal?. Is there a way to make it appear without having to reboot the system? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="23315" LastActivityDate="2021-03-24T17:04:50.550" Title="When installing apps, they don't appear" Tags="|user-interface|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25050" PostTypeId="2" ParentId="24405" CreationDate="2020-06-26T06:54:33.307" Score="0" Body="&lt;p&gt;Unless Dark Mode it's not officially supported in EOS, a workaround in this thread: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22857" LastActivityDate="2020-06-26T06:54:33.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25051" PostTypeId="2" ParentId="25030" CreationDate="2020-06-26T13:47:22.010" Score="0" Body="&lt;p&gt;Thank you guys. Finally solved my problem using Droidcam software. I've found better optimized for Linux systems than Iriunwebcam.&#xA;&lt;strong&gt;Now, I can make Gogole Meet videocalls using my phone as webcam in a Surface book device.&lt;/strong&gt;&#xA;The recipe:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Elementary OS 5.1 Hera&lt;/li&gt;&#xA;&lt;li&gt;Surface-linux Kernel (&lt;a href=&quot;https://github.com/linux-surface/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/linux-surface/linux-surface&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;v4l2loopback 0.12.5 (&lt;a href=&quot;https://github.com/umlaeute/v4l2loopback&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/umlaeute/v4l2loopback&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Droidcam (&lt;a href=&quot;https://www.dev47apps.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.dev47apps.com/&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I hope this helps.&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="23304" LastActivityDate="2020-06-26T13:47:22.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25054" PostTypeId="2" ParentId="25045" CreationDate="2020-06-26T17:01:14.507" Score="1" Body="&lt;p&gt;Update:&lt;/p&gt;&#xA;&lt;p&gt;I found a fix. Starting with the previous kernel version fixed the problem.&lt;/p&gt;&#xA;&lt;p&gt;Select &lt;code&gt;Advanced Options for Elementary &lt;/code&gt; from the Grub Menu, and then an older Version. That fixed it for me.&lt;/p&gt;&#xA;&lt;p&gt;Kodos&lt;/p&gt;&#xA;" OwnerUserId="23314" LastActivityDate="2020-06-26T17:01:14.507" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25055" PostTypeId="2" ParentId="22179" CreationDate="2020-06-26T19:00:55.537" Score="0" Body="&lt;p&gt;Type commands in terminal one by one:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;cd /Downloads&#xA;wget https://wireless.wiki.kernel.org/_media/en/users/drivers/iwlwifi-9000-pu-b0-jf-b0-34.618819.0.tgz&#xA;tar -xzvf iwlwifi-9000-pu-b0-jf-b0-34.618819.0.tgz &#xA;cd iwlwifi-9000-pu-b0-jf-b0-34.618819.0&#xA;sudo cp iwlwifi-9000-pu-b0-jf-b0-34.ucode /lib/firmware&#xA;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt install --reinstall linux-image-generic&#xA;sudo apt install -y linux-firmware &#xA;sudo apt install -y linux-image-extra-*&#xA;sudo apt install -y linux-modules-extra-$(uname -r)&#xA;sudo update-initramfs -u&#xA;sudo apt autoremove &#xA;sudo apt autoclean&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Explanation from the README.iwlwifi-9000.ucode&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;OVERVIEW&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The files iwlwifi-9000-pu-b0-jf-b0-34.ucode provided in this package&#xA;must be present on your system in order for the Intel Wireless WiFi Link&#xA;AGN driver for Linux (iwlwifi) to operate on your system.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The &amp;quot;-34&amp;quot; in the filename reflects an interface/architecture version number.&#xA;It will change only when changes in new uCode releases make the new uCode&#xA;incompatible with earlier drivers.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;On adapter initialization, and at varying times during the uptime of&#xA;the adapter, the microcode is loaded into the memory on the network&#xA;adapter.  The microcode provides the low level MAC features including&#xA;radio control and high precision timing events (backoff, transmit,&#xA;etc.) while also providing varying levels of packet filtering which can&#xA;be used to keep the host from having to handle packets that are not of&#xA;interest given the current operating mode of the device.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;INSTALLATION&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The iwlwifi driver will look for the file iwlwifi-9000-pu-b0-jf-b0-34.ucode&#xA;using the kernel's firmware_class infrastructure.&#xA;More information can be found under Documentation/firmware_class in kernel&#xA;source. In order to function correctly, you need to have this support enabled&#xA;in your kernel.  When you configure the kernel, you can find this option in&#xA;the following location:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;    Device Drivers -&amp;gt;&#xA;            Generic Driver Options -&amp;gt;&#xA;                    Userspace firmware loading support&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;You can determine if your kernel currently has firmware loader support&#xA;by looking for the CONFIG_FW_LOADER definition on your kernel's&#xA;.config.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;In addition to having the firmware_class support in your kernel, you&#xA;must also have a working udev and uevent infrastructure configured.&#xA;The steps for installing and configuring udev are very&#xA;distribution specific.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Once you have the firmware loader in place (or if you aren't sure and&#xA;you just want to try things to see if it works), you need to install&#xA;the microcode file into the appropriate location.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Where that appropriate location is depends (again) on your system&#xA;distribution.  You can typically find this location by looking in the&#xA;udev scripts of your distro, the default is /lib/firmware.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Installation of the firmware is simply:&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;    % cp iwlwifi-9000-pu-b0-jf-b0-34.ucode /lib/firmware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;You can now load the driver (see the INSTALL and README.iwlwifi provided with the iwlwifi package for information on building and using that driver.)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Additional Intel Wi-Fi Linux Drivers for other people: &lt;a href=&quot;https://www.intel.com/content/www/us/en/support/articles/000005511/network-and-i-o/wireless-networking.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Intel Wi-Fi drivers for Linux:&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-27T05:30:03.143" LastActivityDate="2020-06-27T05:30:03.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25058" PostTypeId="2" ParentId="25049" CreationDate="2020-06-27T15:58:33.870" Score="0" Body="&lt;p&gt;Yeah this is normal.&#xA;Instead of restarting, you should just log out. It gonna be faster.&lt;/p&gt;&#xA;&lt;p&gt;Btw, try to find app in AppCenter before finding it in Snapd.&lt;/p&gt;&#xA;" OwnerUserId="23326" LastActivityDate="2020-06-27T15:58:33.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25060" PostTypeId="1" CreationDate="2020-06-28T13:35:10.383" Score="0" ViewCount="141" Body="&lt;p&gt;I got my system to be in darkmode, except for the meta menu, calendar, system tray and power options from the top panel. Also, every app is now dark mode, except for system-settings its child windows.&lt;/p&gt;&#xA;&lt;p&gt;I've used 'prefer dark mode' in system settings and this &lt;a href=&quot;https://github.com/veyselerden/elementaryos-dark-theme-enabler-script&quot; rel=&quot;nofollow noreferrer&quot;&gt;this repo&lt;/a&gt;. to get to where what's it at now. Anyone know how I can fix this?&lt;/p&gt;&#xA;&lt;p&gt;thanks!&lt;/p&gt;&#xA;" OwnerUserId="23335" LastActivityDate="2020-06-28T14:45:54.827" Title="How to get top panel drop downs to become dark mode?" Tags="|themes|" AnswerCount="1" CommentCount="0" ClosedDate="2020-07-03T04:42:10.453" ContentLicense="CC BY-SA 4.0" />
  <row Id="25061" PostTypeId="2" ParentId="25060" CreationDate="2020-06-28T14:40:47.027" Score="0" Body="&lt;p&gt;I'm using &lt;strong&gt;elementary tweaks&lt;/strong&gt; to archieve dark mode, which don't have problem for dropdown menu of wingpanel.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;elementary tweaks&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;For System Settings, dark mode doesn't apply after recent upate. Fix can be found below.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Replace the file at&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;/usr/share/dbus-1/interfaces/io.elementary.pantheon.AccountsService.xml&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;with the contents of&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and change the value of &lt;code&gt;PrefersColorScheme&lt;/code&gt; property to &lt;code&gt;1&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18318" LastEditorUserId="18318" LastEditDate="2020-06-28T14:45:54.827" LastActivityDate="2020-06-28T14:45:54.827" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25062" PostTypeId="2" ParentId="25008" CreationDate="2020-06-28T15:24:59.527" Score="0" Body="&lt;p&gt;Thanks &lt;a href=&quot;https://elementaryos.stackexchange.com/users/3911/jeremy-wootten&quot;&gt;Jeremy Wootten&lt;/a&gt; .&#xA;I downloaded and installed the souce of dropbox-plugin from &lt;a href=&quot;https://github.com/elementary/files/tree/dropbox-plugin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/tree/dropbox-plugin&lt;/a&gt;&#xA;It's working.&lt;/p&gt;&#xA;" OwnerUserId="23261" LastActivityDate="2020-06-28T15:24:59.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25064" PostTypeId="1" CreationDate="2020-06-28T16:14:38.027" Score="1" ViewCount="70" Body="&lt;p&gt;I'm installing elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;It asked me for a product key and said there must be some Certificate of Authenticity on it, like this: &lt;a href=&quot;https://i.stack.imgur.com/lPRcI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lPRcI.png&quot; alt=&quot;Arch Linux Certificate of Authenticity example&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have tried visiting URL on this image, but it is replaced with some nonsense. Where is it located?&lt;/p&gt;&#xA;" OwnerDisplayName="user23337" LastEditorDisplayName="user23337" LastEditDate="2020-06-28T16:34:58.513" LastActivityDate="2020-06-29T10:04:09.727" Title="Genuine elementary OS installation" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25065" PostTypeId="1" CreationDate="2020-06-28T17:13:41.707" Score="1" ViewCount="822" Body="&lt;p&gt;Only user-wide installation is done when installing Flatpak apps in AppCenter, with normal or admin user. System-wide installation can be done in Terminal. But then it won't be reflected in AppCenter. Which means no update notification for those system-wide installed apps.&lt;/p&gt;&#xA;&lt;p&gt;Is it possible to do system-wide installation in AppCenter?&lt;/p&gt;&#xA;" OwnerUserId="18318" LastActivityDate="2021-02-02T13:39:34.407" Title="Flatpak apps with System-wide installation in AppCenter" Tags="|appcenter|flatpak|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25066" PostTypeId="2" ParentId="22179" CreationDate="2020-06-28T19:21:10.133" Score="0" Body="&lt;p&gt;How to install i915 firmware.&lt;/p&gt;&#xA;&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/&#xA;sudo mkdir i915&#xA;cd i915 &#xA;git clone https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git &#xA;sudo cp -R linux-firmware/i915/* /lib/firmware/i915/&#xA;sudo update-initramfs -u&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-30T05:45:02.173" LastActivityDate="2020-06-30T05:45:02.173" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25067" PostTypeId="1" CreationDate="2020-06-28T22:10:45.413" Score="0" ViewCount="66" Body="&lt;p&gt;Good night people,&#xA;I have a macbook pro 2011, I5 and 4 GB of memory, in the future I intend to put an SSD and 8 GB of memory.&#xA;Currently, he is with High Sierra, and I feel that he has some problems. I know that doing the upgrade greatly improves performance, the system receives security updates, but some software does not work anymore.&#xA;Can I run Elementary smoothly? In terms of the battery, it shows that the total charge is 83%, no more than that, and discharges very fast. is there anything that helps to hold the battery more? My use is for HTML, CSS and JavaScript.&#xA;Thank you&lt;/p&gt;&#xA;" OwnerDisplayName="user19919" LastActivityDate="2020-06-28T22:10:45.413" Title="Install Elementary in mb pro 2011" Tags="|release-hera|macbook|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25068" PostTypeId="2" ParentId="17991" CreationDate="2020-06-29T06:00:07.697" Score="0" Body="&lt;p&gt;Report this as a bug on the git for Elementary OS. &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt; It is probably because of Gtk-3.0 or Vala language which they use to write the code for the wingpanel or something else, maybe even of the firmware for touch screen. Hard to say.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-29T06:00:07.697" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25069" PostTypeId="2" ParentId="20819" CreationDate="2020-06-29T06:10:49.350" Score="1" Body="&lt;p&gt;Download the iso directly from Elementary OS website. Get rid of the rufus. Download balena etcher, install it and run it to make bootable stick using the usb drive and downloaded iso file. Turn off fast boot in power management in Windows. Make in Windows disk manager empty space for Elementary OS, but do not format it. During the installation just select this empty space to tell Elementary OS to install there. So as far as I remember it is not the first automated installation, not the third option with the manual partitioning but the second which allows to install Elementary OS alongside with Windows.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-29T06:10:49.350" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25070" PostTypeId="2" ParentId="25065" CreationDate="2020-06-29T07:41:40.850" Score="-2" Body="&lt;p&gt;Developers of the Elementary OS are not answering questions on forum. Report it on Elementary OS github. Maybe they will answer. But I doubt.  Besides I recommend to read the guide: &lt;a href=&quot;https://itsfoss.com/flatpak-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;flatpak guide&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-06-29T07:47:41.247" LastActivityDate="2020-06-29T07:47:41.247" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25072" PostTypeId="2" ParentId="25065" CreationDate="2020-06-29T09:50:40.830" Score="1" Body="&lt;p&gt;It is not currently possible.&lt;/p&gt;&#xA;&lt;p&gt;However, there is &lt;a href=&quot;https://github.com/elementary/appcenter/pull/1308&quot; rel=&quot;nofollow noreferrer&quot;&gt;ongoing work&lt;/a&gt; to support this. I can't give a specific date as to when that feature would be ready, but I would hope it would be complete by the release of elementary OS 6.0&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-29T09:50:40.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25073" PostTypeId="2" ParentId="25064" CreationDate="2020-06-29T10:04:09.727" Score="2" Body="&lt;p&gt;elementary OS does not use product keys or prompt for product keys.&lt;/p&gt;&#xA;&lt;p&gt;Please ensure that what you have downloaded and are trying to install originates from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;the elementary website&lt;/a&gt; and that the checksum matches as per &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;the installation guide&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-06-29T10:04:09.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25074" PostTypeId="1" CreationDate="2020-06-29T18:53:31.730" Score="1" ViewCount="70" Body="&lt;p&gt;I am on elementary os 5.1 on MB Pro mid 2012. I believe that is 11,1. Everything worked great last night but turn on from normal shutdown and now missing keyboard, touchpad, wifi and Bluetooth and screen resolution is wrong.&lt;/p&gt;&#xA;&lt;p&gt;I can connect USB mouse and keyboard. uname -r shows 5.3.0-1026-gke&lt;/p&gt;&#xA;&lt;p&gt;Tried looking at log files in /VAR/ but print is small and nothing stands out just yet.&lt;/p&gt;&#xA;&lt;p&gt;I am going to try to download another image to see if this is hardware or driver. I do not dual boot, so no grub to my knowledge.&lt;/p&gt;&#xA;&lt;p&gt;I did some work with snaps yesterday to install wireguard. Any help would be appreciated&lt;/p&gt;&#xA;" OwnerUserId="23348" LastActivityDate="2024-03-11T19:03:30.433" Title="Booted up to no keyboard, touchpad, wifi, Bluetooth, and bad display" Tags="|boot|drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25076" PostTypeId="2" ParentId="2730" CreationDate="2020-06-30T06:23:07.647" Score="1" Body="&lt;p&gt;Ctrl+Alt+F1 to F6 switches to terminal on logon screen. Ctrl+Alt+F7 goes back to logon screen. This solution is from the beginning of Linux history.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-30T06:23:07.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25077" PostTypeId="2" ParentId="25074" CreationDate="2020-06-30T06:27:49.090" Score="0" Body="&lt;p&gt;Wireguard is available in kernel 5.6 or newer, so the question is did you compile kernel 5.6 or newer from the source code and additionally performed update-initramfs after that? And yes this command can show missing firmware which need to be installed. It seems you messed up your system because of wireguard. I am wondering which tutorial did you use to make wireguard work.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-30T06:27:49.090" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25078" PostTypeId="1" CreationDate="2020-06-30T06:30:37.890" Score="1" ViewCount="29" Body="&lt;p&gt;I am thinking to switch from OSX to Elementary but I'll do the installation on my workstation I would like to lose as less time as possible.&lt;/p&gt;&#xA;&lt;p&gt;I am on an hackintosh and I know I could create a VM and try the installation there and when I am ready switch to a full installation but as far as I understand I'll lose all the customizations I've done in my VM and need to start fresh.&lt;/p&gt;&#xA;&lt;p&gt;I have an SSD that I am not using and I would like to install in there the new Elementary OS, the base idea is to save as much time as possible. This would be the best scenario:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install Elementary OS on the free SSD while running my main OS&lt;/li&gt;&#xA;&lt;li&gt;Configure Elementary OS (still) while running my main OS, install apps etc&lt;/li&gt;&#xA;&lt;li&gt;Once ready shut down the computer&lt;/li&gt;&#xA;&lt;li&gt;Unplug the SSD where is OSX&lt;/li&gt;&#xA;&lt;li&gt;Run Elementary OS, hopefully for good :D&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Does any of you knows a way to do this or ever tried something like it? I would like to install and configure Elementary with as mush downtime as possible and I started to think about this approach but I am not sure if it is possible.&lt;/p&gt;&#xA;&lt;p&gt;Probably the live installation is the option to go?&lt;/p&gt;&#xA;&lt;p&gt;Thank you all for the future answers.&lt;/p&gt;&#xA;" OwnerUserId="23353" LastActivityDate="2022-03-25T12:05:40.670" Title="How to install while using my operating system" Tags="|install|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25079" PostTypeId="2" ParentId="19108" CreationDate="2020-06-30T06:34:11.910" Score="0" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update --fix-missing&#xA;sudo dpkg –configure -a&#xA;sudo apt-get install -f&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-30T06:34:11.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25080" PostTypeId="1" CreationDate="2020-06-30T07:09:57.413" Score="0" ViewCount="170" Body="&lt;p&gt;Since yesterday emails from gmail account are not being downloaded at all - I have elementary OS installed on another laptop and I have experienced no problems. Any ideas how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="23354" LastActivityDate="2024-03-14T17:04:20.673" Title="emails from gmail account not syncing" Tags="|settings|display|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25081" PostTypeId="1" CreationDate="2020-06-30T08:02:15.677" Score="0" ViewCount="211" Body="&lt;p&gt;When the computer turns on, the menu comes too late. It crashes when I click on notifications when it arrives. Can you help me?&lt;/p&gt;&#xA;&lt;p&gt;The kernel and elementary version I use:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OS: elementary OS 5.1.5 Hera x86_64 &#xA;Host: HP EliteBook 840 G4 &#xA;Kernel: 4.15.0-108-generic &#xA;Uptime: 2 mins &#xA;Packages: 2381 &#xA;Shell: zsh 5.4.2 &#xA;Resolution: 1366x768 &#xA;DE: Pantheon &#xA;WM: Mutter(Gala) &#xA;Terminal: io.elementary.t &#xA;CPU: Intel i5-7200U (4) @ 3.100GHz &#xA;GPU: Intel HD Graphics 620 &#xA;Memory: 1498MiB / 7856MiB &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LZScD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LZScD.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18552" LastEditorUserId="18552" LastEditDate="2020-06-30T09:21:00.687" LastActivityDate="2024-03-13T13:01:50.213" Title="Wingpanel use high CPU but late show" Tags="|wingpanel|" AnswerCount="3" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="25082" PostTypeId="2" ParentId="25081" CreationDate="2020-06-30T10:05:24.513" Score="0" Body="&lt;p&gt;Check current kernel with uname -a in terminal and then proceed the kernel upgrade.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;uname -a&#xA;wget -c https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.3/linux-headers-5.3.0-050300_5.3.0-050300.201909152230_all.deb https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.3/linux-headers-5.3.0-050300-generic_5.3.0-050300.201909152230_amd64.deb https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.3/linux-image-unsigned-5.3.0-050300-generic_5.3.0-050300.201909152230_amd64.deb https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.3/linux-modules-5.3.0-050300-generic_5.3.0-050300.201909152230_amd64.deb&#xA;sudo dpkg -i linux-headers-5.3.0-050300*.deb linux-image-unsigned-5.3.0*.deb linux-modules-5.3.0-050300*.deb&#xA;sudo reboot&#xA;uname -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Additional knowledge for advanced users which allow to install up to 5.6 version which is stable. 5.7 is in testing (I am using it).&lt;/p&gt;&#xA;&lt;p&gt;Mainlines:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.3/&#xA;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.4/&#xA;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.5/&#xA;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.6/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Use always amd64 architecture for 64 bit. The exception is when you are using 32 bit architecture, because you have to.&lt;/p&gt;&#xA;&lt;p&gt;Do not use lowlatency headers and images, because it is for special purpose, when you really need it.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-30T10:05:24.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25083" PostTypeId="2" ParentId="25081" CreationDate="2020-06-30T10:16:20.407" Score="0" Body="&lt;p&gt;Reinstall wingpanel&lt;/p&gt;&#xA;&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libchamplain-0.12-dev libchamplain-gtk-0.12-dev libclutter-1.0-dev libecal1.2-dev libedataserverui1.2-dev libfolks-dev libgee-0.8-dev libgeocode-glib-dev libgeoclue-2-dev libglib2.0-dev libgranite-dev libgtk-3-dev libical-dev meson valac&#xA;cd&#xA;cd Downloads&#xA;wget https://github.com/elementary/wingpanel/archive/master.zip&#xA;unzip master.zip&#xA;cd wingpanel-master&#xA;meson build --prefix=/usr&#xA;cd build&#xA;ninja&#xA;sudo ninja install&#xA;wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-06-30T10:16:20.407" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25084" PostTypeId="1" CreationDate="2020-06-30T11:51:12.967" Score="1" ViewCount="75" Body="&lt;p&gt;I have HP Elitebook g3 connected to external monitor HP 24&amp;quot; monitor via USB-C and I can't get colours on external monitor even close to what is on Laptop - laptop screen is fine, dragging and dropping Chrome browser window from laptop screen to external display removes all shadows of grey.&#xA;I tried following all sorts of advice on &lt;a href=&quot;https://askubuntu.com/questions/199661/how-do-you-set-system-display-color-profiles-in-xubuntu-and-lubuntu&quot;&gt;web&lt;/a&gt;, &lt;a href=&quot;https://www.reallinuxuser.com/how-to-color-calibrate-your-monitor-in-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;another&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10458/how-do-i-fix-calibrate-my-screen-colors&quot;&gt;another&lt;/a&gt;, but to know avail.&#xA;I can now change resolution and gamma correction per monitor, but I still can't find a way where external monitor displays colours reasonably, currently it looks like no shadows/no greys.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;colormgr get-devices-by-kind display&#xA;Object Path:   /org/freedesktop/ColorManager/devices/xrandr_Chimei_Innolux_Corporation_alex_1000&#xA;Owner:         alex&#xA;Created:       June 30 2020, 09:13:18 AM&#xA;Modified:      June 30 2020, 10:19:34 AM&#xA;Type:          display&#xA;Enabled:       Yes&#xA;Embedded:      Yes&#xA;Model:         HP EliteBook x360 1030 G3&#xA;Vendor:        Hewlett Packard&#xA;Serial:        unknown&#xA;Seat:          seat0&#xA;Scope:         temp&#xA;Colourspace:   rgb&#xA;Device ID:     xrandr-Chimei Innolux Corporation&#xA;Profile 1:     icc-4cbae5a38a7c0fa9e4de8532e1bf6acb&#xA;               /home/alex/.local/share/icc/edid-4a7c449feabad383ba36acbdb55c6200.icc&#xA;Metadata:      XRANDR_name=eDP-1&#xA;Metadata:      OutputPriority=secondary&#xA;Metadata:      OwnerCmdline=/usr/lib/gnome-settings-daemon/gsd-color &#xA;Metadata:      OutputEdidMd5=4a7c449feabad383ba36acbdb55c6200&#xA;&#xA;Object Path:   /org/freedesktop/ColorManager/devices/xrandr_HP_Inc__HP_E243d_CNC90330QF_alex_1000&#xA;Owner:         alex&#xA;Created:       June 30 2020, 11:37:49 AM&#xA;Modified:      June 30 2020, 11:37:49 AM&#xA;Type:          display&#xA;Enabled:       Yes&#xA;Embedded:      No&#xA;Model:         HP E243d&#xA;Vendor:        Hewlett Packard&#xA;Serial:        CNC90330QF&#xA;Seat:          seat0&#xA;Scope:         temp&#xA;Colourspace:   rgb&#xA;Device ID:     xrandr-HP Inc.-HP E243d-CNC90330QF&#xA;Profile 1:     icc-5a42c8f4d8898737affa4fa253629350&#xA;               /home/alex/.local/share/icc/HP.icc&#xA;Profile 2:     icc-f11d711589cb96e44261fb95baa0c088&#xA;               /home/alex/.local/share/icc/edid-75ad81bba70229fde551433ac6ce2b21.icc&#xA;Profile 3:     icc-e6b0b05b63a857001a353db9ac540145&#xA;               /home/alex/.local/share/icc/edid-1cc561693c489fb94edc90bc7049dfd0.icc&#xA;Metadata:      XRANDR_name=DP-1&#xA;Metadata:      OutputPriority=primary&#xA;Metadata:      OwnerCmdline=/usr/lib/gnome-settings-daemon/gsd-color &#xA;Metadata:      OutputEdidMd5=1cc561693c489fb94edc90bc7049dfd0&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23356" LastActivityDate="2020-06-30T11:51:12.967" Title="Setting right profile for external monitor HP E243d" Tags="|display|color|monitors|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25085" PostTypeId="1" CreationDate="2020-06-30T14:09:07.613" Score="0" ViewCount="192" Body="&lt;p&gt;When I set the brightness to the minimum it stays at zero visibility, which seems to me as a calibration error.&lt;/p&gt;&#xA;&lt;p&gt;It's very frustrating if you don't have keyboard shortcuts to increase it again.&lt;/p&gt;&#xA;" OwnerUserId="23358" LastEditorUserId="18392" LastEditDate="2020-07-03T04:43:34.423" LastActivityDate="2024-03-14T12:01:50.297" Title="Brightness calibration via keyboard shortcut" Tags="|display|brightness|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25086" PostTypeId="1" AcceptedAnswerId="25152" CreationDate="2020-06-30T15:23:08.647" Score="0" ViewCount="152" Body="&lt;p&gt;The Zoom meeting app appears to be a larger resolution than the desktop. I've apt remove --purge, deleting any configuration files I could find using the find command, removing and reinstalling, installing from the deb file from Zoom, and installing from flathub. I had larger fonts set in the Settings of eOS and switched to the Default setting. The problems seems to have occurred after this, but I'm not 100% on that. I've attached a screenshot. Thanks.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l1LRh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l1LRh.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2020-07-07T11:21:17.277" Title="Resolution in Zoom meeting app larger than desktop resolution" Tags="|pantheon|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25087" PostTypeId="1" CreationDate="2020-06-30T20:36:19.397" Score="1" ViewCount="106" Body="&lt;p&gt;I have recently installed Steam and downloaded A Plague Tale:Innocence, and Red Dead Redemption 2.&lt;/p&gt;&#xA;&lt;p&gt;A Plague Tale:Innocence in particular because A) It is rated Platinum on protondb.com and B) It worked fine on this machine when I had it as dual boot. In other words I know it should work fine.&lt;/p&gt;&#xA;&lt;p&gt;At the moment what is happening is this:&lt;/p&gt;&#xA;&lt;p&gt;I click the icon for A Plague Tale:Innocence&lt;/p&gt;&#xA;&lt;p&gt;The Steam window comes up telling me it is about to launch the game.&lt;/p&gt;&#xA;&lt;p&gt;The screen goes blank&lt;/p&gt;&#xA;&lt;p&gt;We go back to where we were&lt;/p&gt;&#xA;&lt;p&gt;I have installed proton 5.0.9 and checked all the user question boards I can but I can find no-one else with the same problem.&lt;/p&gt;&#xA;&lt;p&gt;Any help gratefully received, I have the feeling I missing something simple.&lt;/p&gt;&#xA;&lt;p&gt;I would rate myself a noob in the world in Linux.&lt;/p&gt;&#xA;&lt;p&gt;Many thanks.&lt;/p&gt;&#xA;&lt;p&gt;My technical details are below:&lt;/p&gt;&#xA;&lt;p&gt;=============================&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 5.1.5 Hera&lt;/p&gt;&#xA;&lt;p&gt;Built on Ubuntu 18.04.4 LTS&lt;/p&gt;&#xA;&lt;p&gt;Linux 5.3.0-61-generic&lt;/p&gt;&#xA;&lt;p&gt;GTK 3.22.30&lt;/p&gt;&#xA;&lt;p&gt;=============================&lt;/p&gt;&#xA;&lt;p&gt;Quad-Core Intel® Core™ i7-8550U CPU @ 1.80GHz&lt;/p&gt;&#xA;&lt;p&gt;Intel Corporation UHD Graphics 620 (rev 07)&lt;/p&gt;&#xA;&lt;p&gt;19,6 GB memory&lt;/p&gt;&#xA;&lt;p&gt;491,2 GB storage (NVMe SSD)&lt;/p&gt;&#xA;" OwnerUserId="23359" LastEditorUserId="15904" LastEditDate="2020-07-03T04:44:36.123" LastActivityDate="2020-07-03T04:44:36.123" Title="Elementary OS and Steam, Games not working" Tags="|release-hera|steam|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25089" PostTypeId="1" CreationDate="2020-07-01T07:58:08.893" Score="0" ViewCount="99" Body="&lt;p&gt;I tried to install spotify with a repo but I think I did something wrong. Ever since I did this I can't fetch updates in the App enter- Failed to fetch updates : How to fix corrupt source file &lt;em&gt;Details :E: Type ‘sudo’ is not known on line 1 in source list /etc/apt/sources.list.d/spotify.list&#xA;E: The list of sources could not be read&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thank you for your guidance&lt;a href=&quot;https://i.stack.imgur.com/NZYJi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NZYJi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23363" LastActivityDate="2024-03-12T21:05:35.763" Title="Manually added software repo error" Tags="|updates|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25090" PostTypeId="2" ParentId="25089" CreationDate="2020-07-01T12:42:49.187" Score="0" Body="&lt;p&gt;Simply removing the file should solve your issue.&lt;/p&gt;&#xA;&lt;p&gt;In Terminal run:&#xA;&lt;code&gt;sudo rm /etc/apt/sources.list.d/spotify.list&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I suggest installing it from &lt;a href=&quot;https://flathub.org/apps/details/com.spotify.Client&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub&lt;/a&gt;. Click on the blue 'Install' button and the click the downloaded file.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-07-01T12:42:49.187" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25091" PostTypeId="1" CreationDate="2020-07-01T14:36:04.167" Score="0" ViewCount="132" Body="&lt;p&gt;I'm trying to try out elementary os from a bootable usb, but every time I hit the 'try elementary os' button, the pc shuts down and when I boot it again, I  receive the exact same screen and the same outcome when trying to try out.&#xA;I have more than once used the try out function before on multiple devices and it always worked like a charm, I really have no clue what's different this time.&lt;/p&gt;&#xA;" OwnerUserId="23365" LastActivityDate="2024-03-14T06:06:00.667" Title="Bootloop when trying to try out elementary os from bootable usb" Tags="|boot|dual-boot|usb-drive|startup|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25092" PostTypeId="1" CreationDate="2020-07-01T15:54:19.420" Score="0" ViewCount="525" Body="&lt;p&gt;Just installed Elementary OS on my late 2011 Macbook Pro but the keyboard backlight is no longer on and I cannot find a way to turn it on. I have gone to keyboard settings and there is no option for illumination. Any help will be greatly appreciated! I am new to linux so sorry if the solution is obvious. Thanks in advance for any guidance.&lt;/p&gt;&#xA;" OwnerUserId="22297" LastActivityDate="2020-11-30T15:01:50.133" Title="No keyboard backlight after Elementary OS install" Tags="|keyboard|macbook|backlight|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25093" PostTypeId="1" CreationDate="2020-07-01T16:48:29.553" Score="0" ViewCount="197" Body="&lt;p&gt;How can I calibrate a USB touch screen device? I have tried the app in the app store but it does not run. The touchscreen is 3m usb touchscreen - ex II and I am using the latest version of ElementaryOS&lt;/p&gt;&#xA;" OwnerUserId="23367" LastEditorUserId="15904" LastEditDate="2020-07-03T04:43:38.337" LastActivityDate="2024-03-14T20:06:45.803" Title="How to Calibrate Touch Screen" Tags="|release-hera|touchscreen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25094" PostTypeId="2" ParentId="25093" CreationDate="2020-07-01T17:03:39.280" Score="0" Body="&lt;p&gt;Xinput and (maybe) xinput-gui may help you. I used xinput_calibrator and it worked fine.&#xA;In ubuntuforum you'll find this:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/51445/how-do-i-calibrate-a-touchscreen-on-a-dual-monitor-system&quot;&gt;https://askubuntu.com/questions/51445/how-do-i-calibrate-a-touchscreen-on-a-dual-monitor-system&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22533" LastEditorUserId="22533" LastEditDate="2020-07-01T17:14:45.360" LastActivityDate="2020-07-01T17:14:45.360" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25095" PostTypeId="2" ParentId="25085" CreationDate="2020-07-02T06:04:27.840" Score="0" Body="&lt;p&gt;If you can adjust brightness it probably means you are using a laptop (correct me if I'm wrong). If you are on a laptop you can adjust brightness using the function key combinations (e.g. &lt;kbd&gt;Fn&lt;/kbd&gt;+&lt;kbd&gt;F4&lt;/kbd&gt;).&lt;/p&gt;&#xA;&lt;p&gt;On desktop it probably not directly possible - usually depends upon the monitor you're using. Check for on physical buttons for options like auto-calibration etc.&lt;/p&gt;&#xA;&lt;p&gt;Using GUI:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yHsm2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yHsm2.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pK4P1.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pK4P1.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Using CLI: Reference: &lt;a href=&quot;https://www.how2shout.com/how-to/how-to-change-screen-brightness-in-ubuntu-using-command-terminal.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.how2shout.com/how-to/how-to-change-screen-brightness-in-ubuntu-using-command-terminal.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Get the connected monitor:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;xrandr | grep &amp;quot; connected&amp;quot; | cut -f1 -d &amp;quot; &amp;quot;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Adjust the brightness (for output = &lt;code&gt;VGA-1&lt;/code&gt;):&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;xrandr --output VGA-1 --brightness 0.5&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;As for keyboard shortcut you've mentioned you can create custom shortcut using the above command here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VBQ3E.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VBQ3E.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18392" LastActivityDate="2020-07-02T06:04:27.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25096" PostTypeId="2" ParentId="25091" CreationDate="2020-07-02T06:06:41.100" Score="0" Body="&lt;p&gt;You can try to run Linux in single mode and get into the system to remove the splash screen from the /etc/default/grub and then you will be able to see what is going on. The splash screen is nice but nonsense, because when there is an issue during the start of the system users are unable to see what is wrong. If you want to do that, let me know and I will provide a tutorial. This is rather not for the beginner. One more time Elementary OS developers made me sure they have no idea what Linux was invented for. It should work, not look nice.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-02T06:15:10.760" LastActivityDate="2020-07-02T06:15:10.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25097" PostTypeId="2" ParentId="25091" CreationDate="2020-07-02T06:10:40.567" Score="0" Body="&lt;p&gt;Single user mode in Ubuntu/Elementary OS&lt;/p&gt;&#xA;&lt;p&gt;Ubuntu/Elementary OS will drop you into single user mode automatically if it cannot boot normally. To manually enter single user mode, use the following instructions:&lt;/p&gt;&#xA;&lt;p&gt;From GRUB, press 'e' to edit your boot entry (the Ubuntu entry).&lt;/p&gt;&#xA;&lt;p&gt;Look for the line that starts with linux, then look for ro&lt;/p&gt;&#xA;&lt;p&gt;Add single after ro, ensuring there is a space before and after single&lt;/p&gt;&#xA;&lt;p&gt;Press Ctrl + X to reboot with these settings and enter single user mode&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-02T19:03:22.777" LastActivityDate="2020-07-02T19:03:22.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25098" PostTypeId="2" ParentId="25091" CreationDate="2020-07-02T06:12:17.233" Score="0" Body="&lt;p&gt;Open /etc/default/grub in a text editor of your choice and remove quiet splash.&lt;/p&gt;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press insert button on your keyboard.&lt;/p&gt;&#xA;&lt;p&gt;Remove mentioned words quiet splash&lt;/p&gt;&#xA;&lt;p&gt;Press Esc button on your keyboard.&lt;/p&gt;&#xA;&lt;p&gt;Type :x&lt;/p&gt;&#xA;&lt;p&gt;Type one by one commands below:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub &#xA;&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then remove single using above tutorial and then one more time sudo reboot.&lt;/p&gt;&#xA;&lt;p&gt;Check errors showing on screen.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-02T06:23:55.547" LastActivityDate="2020-07-02T06:23:55.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25099" PostTypeId="2" ParentId="25081" CreationDate="2020-07-02T06:35:41.437" Score="0" Body="&lt;p&gt;For Elementary OS the solution is here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Eelementary-os/+archive/ubuntu/stable&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~elementary-os/+archive/ubuntu/stable &lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:elementary-os/stable&#xA;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-02T06:35:41.437" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25100" PostTypeId="2" ParentId="21911" CreationDate="2020-07-02T06:39:23.503" Score="1" Body="&lt;p&gt;It has been a long time since I posted the question.&lt;/p&gt;&#xA;&lt;h3&gt;Workaround&lt;/h3&gt;&#xA;&lt;p&gt;As a workaround up until now I &lt;strong&gt;purged&lt;/strong&gt; all the NVIDIA drivers and installed and added &lt;code&gt;video=VGA-1:d&lt;/code&gt; this the grub file, which seemed to work fine.&lt;/p&gt;&#xA;&lt;h3&gt;Possible Solution&lt;/h3&gt;&#xA;&lt;p&gt;Yesterday I had to clean up my system completely. So after a fresh install of elementary OS (from: &lt;code&gt;elementaryos-5.1-stable.20200603.iso&lt;/code&gt;) not surprisingly I got this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/09IQb.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/09IQb.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dO2pi.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dO2pi.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Remember this time my grub file is new and has no modifications. So I upgraded the system &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;. Then I installed the Ubuntu drivers with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It automatically installed all the necessary drivers (including NVIDIA GeForce driver v390.18)&lt;/p&gt;&#xA;&lt;p&gt;Rebooted and bingo! It worked like charm.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AFvFV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AFvFV.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qCW0M.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qCW0M.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Info Outputs&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ lspci | grep -i vga&#xA;00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)&#xA;01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 525M] (rev a1)&#xA;&#xA;$ ls /sys/class/drm&#xA;card0  card0-DP-1  card0-HDMI-A-1  card0-LVDS-1  card0-VGA-1  card1  renderD128  renderD129  version&#xA;&#xA;$ xrandr | grep &amp;quot; connected &amp;quot; | awk '{ print$1 }'&#xA;LVDS-1-1&#xA;&#xA;$ xrandr -q&#xA;Screen 0: minimum 8 x 8, current 1366 x 768, maximum 16384 x 16384&#xA;HDMI-0 disconnected (normal left inverted right x axis y axis)&#xA;LVDS-1-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm&#xA;   1366x768      59.64*+&#xA;   1360x768      59.80    59.96  &#xA;   1280x720      60.00    59.99    59.86    59.74  &#xA;   1024x768      60.04    60.00  &#xA;...&#xA;VGA-1-1 disconnected (normal left inverted right x axis y axis)&#xA;HDMI-1-1 disconnected (normal left inverted right x axis y axis)&#xA;DP-1-1 disconnected (normal left inverted right x axis y axis)&#xA;&#xA;$ cat /etc/default/grub&#xA;...&#xA;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLE=menu&#xA;GRUB_TIMEOUT=-1&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Some observations&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Parallelly I had installed Linux Lite 5.0 (Ubuntu base 20.04 &amp;amp; kernel 5.4.x). It did not show any such problems.&lt;/li&gt;&#xA;&lt;li&gt;Neither was it seen on Parrot OS (well... it's not Ubuntu based, so probably of less relevance in this context).&lt;/li&gt;&#xA;&lt;li&gt;I installed elementary OS on other systems with newer NVIDIA integrated as well as dedicated cards and non of them had this problem.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote class=&quot;spoiler&quot;&gt;&#xA;&lt;p&gt; So probably Bionic Beaver has some grudge with NVIDIA GeForce 525M. Haha.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2020-07-02T06:45:48.780" LastActivityDate="2020-07-02T06:45:48.780" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25101" PostTypeId="1" CreationDate="2020-07-02T16:45:39.433" Score="1" ViewCount="533" Body="&lt;p&gt;Does elementary OS have a flatpak repository of the curated apps from its AppCenter? I'd like to be able to use some applications from the elementary OS AppCenter without having to overhaul my operating system.&lt;/p&gt;&#xA;" OwnerUserId="23372" LastActivityDate="2020-07-03T13:27:59.847" Title="elementary OS flatpak repository" Tags="|repositories|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25102" PostTypeId="1" CreationDate="2020-07-02T19:38:02.583" Score="1" ViewCount="126" Body="&lt;p&gt;The Z, X, V, M, N, right alt and left arrow keys do not work every time they are pressed and with time they stop working completely. I was having no issues with Linux Mint but now while using Mint, the problem occurs at boot but pressing any of the above keys 2 or 3 times solves the issue and the keyboard becomes responsive again. The keyboard works in BIOS. Have tried different keyboard layouts but nothing works. Please help, I really wanna use elementary.&#xA;Btw, reinstalling also does not work.&lt;/p&gt;&#xA;" OwnerUserId="23373" LastEditorUserId="84" LastEditDate="2021-07-27T21:09:47.617" LastActivityDate="2021-07-27T21:09:47.617" Title="Some keyboard keys not working after install" Tags="|keyboard|ibus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25104" PostTypeId="2" ParentId="7886" CreationDate="2020-07-03T02:07:35.143" Score="1" Body="&lt;p&gt;On Ubuntu 18.04, I do this executing next command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl restart lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23375" LastActivityDate="2020-07-03T02:07:35.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25105" PostTypeId="2" ParentId="7886" CreationDate="2020-07-03T03:45:21.347" Score="2" Body="&lt;p&gt;The worst is that noone mentioned that you must use alt+ctrl+F1 to F6 to switch to terminal. Login there as standard user. Restart x with sudo command and then press alt+ctrl+F7 to go back to GUI.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-03T03:45:21.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25106" PostTypeId="2" ParentId="25080" CreationDate="2020-07-03T03:50:04.923" Score="0" Body="&lt;p&gt;You can try in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If it will not solve the issue remove account from pantheon mail. Remove it via App Center. Then install Thunderbird in App Center.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-03T03:50:04.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25107" PostTypeId="2" ParentId="25078" CreationDate="2020-07-03T08:17:18.933" Score="1" Body="&lt;p&gt;As a general rule, it is not possible to have two operating systems running natively on the same physical piece of computer hardware simultaneously. You can &lt;strong&gt;install&lt;/strong&gt; two operating systems, but you have to shut one down before you can boot up (or install) the other (AKA dual-booting).&lt;/p&gt;&#xA;&lt;p&gt;So you have two options:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run elementary OS in a VM and you can continue using your host OS while elementary is running inside the VM. This is possible because the VM is essentially virtual hardware and elementary OS isn't interacting directly with your real hardware. But, as you've described, there are limitations to running in a VM.&lt;/li&gt;&#xA;&lt;li&gt;Shut down your current OS and install elementary instead/as-well. You could remove your existing SSD and install elementary as the only OS, or you could attempt dual-booting. Though I don't know how well that would work with &amp;quot;hackintosh&amp;quot;, so do so at your own risk.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-07-03T08:17:18.933" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25108" PostTypeId="1" CreationDate="2020-07-03T12:09:23.247" Score="0" ViewCount="13" Body="&lt;p&gt;I experience a delay in apps I autostart in elementary OS. The problem occurs with the newer kernel releases I've noticed.&lt;/p&gt;&#xA;&lt;p&gt;Any advise is appreciated.&lt;/p&gt;&#xA;&lt;p&gt;My specs:&#xA;| AMD Ryzen 1700x 3.4 GHz | ASUS PRIME X370-A | 32 GB 2400 Mhz DDR4 |&#xA;| ASUS Nvidia 1070 8 GB | SSD 250 GB | HDD 1 TB |&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Linux universe 5.3.0-62-generic #56~18.04.1-Ubuntu SMP Wed Jun 24 16:17:03 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-07-03T12:09:23.247" Title="Delayed in commando/apps in autostart" Tags="|kernel|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25109" PostTypeId="2" ParentId="25101" CreationDate="2020-07-03T13:27:59.847" Score="1" Body="&lt;p&gt;Not yet.&lt;/p&gt;&#xA;&lt;p&gt;All curated apps for AppCenter are currently built as .deb packages. There is a plan to work on moving them all to Flatpak. But this work hasn't been completed yet, mostly due to the fact that there was a team due to go and work on this in person, &lt;a href=&quot;https://blog.elementary.io/appcenter-for-everyone-remote-sprint/&quot; rel=&quot;nofollow noreferrer&quot;&gt;but it got delayed due to Covid-19.&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So there's no definitive date yet of when this will be available.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-07-03T13:27:59.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25110" PostTypeId="2" ParentId="25092" CreationDate="2020-07-03T14:03:20.763" Score="2" Body="&lt;p&gt;What worked for me was to actually press the key (F6) and hold it down. I was surprised to see the lights come up.&lt;/p&gt;&#xA;" OwnerUserId="20751" LastActivityDate="2020-07-03T14:03:20.763" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25111" PostTypeId="1" CreationDate="2020-07-03T14:49:36.157" Score="0" ViewCount="1170" Body="&lt;p&gt;After the 7/2/20 updates, I ran sudo apt autoremove. Since then, the first reboot never went to a login screen. The e splash logo hung there all night.&lt;/p&gt;&#xA;&lt;p&gt;In the morning, I hard rebooted (Power switch on 2011 Mac), then got a grub menu. I went to Advanced, recovery 5.3.0-6.2 generic recovery.&lt;/p&gt;&#xA;&lt;p&gt;Then sent me to a Recovery Menu. But no navigation options worked. Not arrow keys, not tab. When I tried them, I got all kinds of glitches on the screen, showing root terminal prompts in inverse video, etc., but still leaving me somewhere in that list of options. (Are there some tricks to this kind of navigation on a Mac keyboard?) Eventually I seemed to hit &amp;quot;resume&amp;quot; and the machine did come up. But clearly something is wrong with the boot setup, and this pops up fairly often after upgrade.&lt;/p&gt;&#xA;&lt;p&gt;I'd appreciate any suggestions.&lt;/p&gt;&#xA;" OwnerUserId="20751" LastActivityDate="2024-03-16T15:03:30.393" Title="Recovery menu and boot problems" Tags="|boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25112" PostTypeId="1" CreationDate="2020-07-03T16:07:32.383" Score="0" ViewCount="36" Body="&lt;p&gt;Problem: The desktop will fail to launch sometimes after login. It'll just present me with a completely black screen. When this happens, I'm forced to hold the power button and shut down the machine and restart it.&lt;/p&gt;&#xA;" OwnerUserId="20077" LastActivityDate="2020-07-04T18:36:38.450" Title="Bug: Desktop Fails To Launch Sometimes After Login" Tags="|release-hera|desktop|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25113" PostTypeId="2" ParentId="24759" CreationDate="2020-07-03T18:05:05.693" Score="0" Body="&lt;p&gt;I have no idea are you using the 32 -bit architecture and Elementary OS as far as I know is 64 bit, so reading this comment from the website you mentioned is crucial:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;mmstick 2014-01-10 05:20:49 UTC&#xA;The problem has been known since 2011 pretty much. There's no fix that I have found other than using 32-bit or buying something else, like an external USB DAC or a supported ASUS card. When you do get it to work in 32-bit, you can't use the equalizer unless you manually patch the patch_ca0132.c file yourself. I have no idea why the issue with 64-bit hasn't been fixed yet, nor why the equalizer is not enabled by default.mmstick 2014-01-10 05:20:49 UTC&#xA;The problem has been known since 2011 pretty much. There's no fix that I have found other than using 32-bit or buying something else, like an external USB DAC or a supported ASUS card. When you do get it to work in 32-bit, you can't use the equalizer unless you manually patch the patch_ca0132.c file yourself. I have no idea why the issue with 64-bit hasn't been fixed yet, nor why the equalizer is not enabled by default.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-03T18:05:05.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25114" PostTypeId="1" CreationDate="2020-07-03T18:55:35.527" Score="0" ViewCount="1196" Body="&lt;p&gt;I have elementary OS 5.1.5 Hera installed in VirtualBox 6.1.10. The display size 1920x1080 is not offered in the display settings. I have done the following to temporarily add the option.&lt;/p&gt;&#xA;&lt;p&gt;In terminal I input:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo xrandr --newmode &amp;quot;1920x1080_60.00&amp;quot; 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync&#xA;&#xA;sudo xrandr --addmode Virtual1 1920x1080_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I used the display panel to select the new 1920x1080 option and everything looked just as expected. However, even after adding the code to .profile using:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gedit ~/.profile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/F13LE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F13LE.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The changes to the display settings did not survive a restart. How can I accomplish this? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="23378" LastEditorUserId="23378" LastEditDate="2020-07-03T19:52:19.130" LastActivityDate="2024-03-16T13:06:40.830" Title="How to add 1920x1080 Display option and make it survive restart" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25116" PostTypeId="2" ParentId="24119" CreationDate="2020-07-04T06:20:18.427" Score="1" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ke4lV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ke4lV.png&quot; alt=&quot;tmux&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uSnTt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uSnTt.png&quot; alt=&quot;tmux-servers&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4Wvtp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4Wvtp.png&quot; alt=&quot;tmux-bashtop&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Images show how tmux works.&lt;/p&gt;&#xA;&lt;p&gt;When you have opened the terminal with the combination:&lt;/p&gt;&#xA;&lt;p&gt;Ctrl+Alt+t which works by default just press:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Ctrl+Shift+n&lt;/strong&gt; combination and it will open new terminal window each time when you will press it.&lt;/p&gt;&#xA;&lt;p&gt;Ctrl+Shift+t combination opens new tab.&lt;/p&gt;&#xA;&lt;p&gt;Alt+1/2/3/4/5/6/7/8/9 (Page Up) switches between tabs.&lt;/p&gt;&#xA;&lt;p&gt;Ctrl+Shift+w combination closes the current/active tab.&lt;/p&gt;&#xA;&lt;p&gt;Ctrl+d combination = exit or logout. It closes the tab.&lt;/p&gt;&#xA;&lt;p&gt;Ctrl+l combination = clear (current window).&lt;/p&gt;&#xA;&lt;p&gt;Alt+F4 combination closes the terminal.&lt;/p&gt;&#xA;&lt;p&gt;There is no need to create another shortcut. Then just click on the + symbol on the window bar, top left corner and it will open one more tab. Simple as that. If you want to divide one window terminal instead of opening one by one install tmux and learn how to use it. Much more convenient than tabs. I prefer it than multitabs.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install tmux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press Ctrl+b and then type % and it will divide window vertically&lt;/p&gt;&#xA;&lt;p&gt;Press Ctrl+b and then type &amp;quot; and it will divide window horizontally&lt;/p&gt;&#xA;&lt;p&gt;Press Ctrl+b and then type o to switch between panels in tmux.&lt;/p&gt;&#xA;&lt;p&gt;Press ctrl+d or type exit, to close the panel in tmux.&lt;/p&gt;&#xA;&lt;p&gt;I am using htop, glances, bashtop, cmatrix and cava on the screenshots and standard Elementary OS terminal.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-04T13:39:01.397" LastActivityDate="2020-07-04T13:39:01.397" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25117" PostTypeId="1" CreationDate="2020-07-04T06:28:29.470" Score="0" ViewCount="590" Body="&lt;p&gt;In elementaryos 5.1 (Hera) appcenter doesnt show the downloaded flatpak apps or option to download the flatpak app. (even though I downloaded firefox and libreoffice from flathub.org)&lt;/p&gt;&#xA;&lt;p&gt;How can I enable flatpak apps in appcenter without sideloading?&lt;/p&gt;&#xA;" OwnerUserId="23158" LastActivityDate="2024-02-17T23:06:40.837" Title="Flatpak installation from flathub.org doesnt add flatpak apps to elementaryos appcenter" Tags="|appcenter|flatpak|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25118" PostTypeId="2" ParentId="24119" CreationDate="2020-07-04T08:32:21.920" Score="0" Body="&lt;p&gt;well ... if you add the terminal app to the tray at the bottom ... if you right click it ... it will give you an option to open a new terminal window&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2020-07-04T08:32:21.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25119" PostTypeId="1" AcceptedAnswerId="25120" CreationDate="2020-07-04T11:37:19.800" Score="0" ViewCount="106" Body="&lt;p&gt;I have a Dell wd19TB thunderbolt dock and it seems to work fine with ElementaryOS until I try to disable the Laptop display and only use my external displays. I am trying to disable the laptop display however it wont disable. I tried this same functionality on Ubuntu and it worked with no issues. I also made sure the &amp;quot;bolt&amp;quot; application was installed in ElementaryOS. My laptop is a Lenovo yoga 720. Any help would be very appreciated.&lt;/p&gt;&#xA;" OwnerUserId="19731" LastActivityDate="2020-08-03T15:01:35.133" Title="Dell WD19TB and ElementaryOS" Tags="|display|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25120" PostTypeId="2" ParentId="25119" CreationDate="2020-07-04T13:20:10.713" Score="1" Body="&lt;p&gt;Type in terminal command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to shows the exact names of displays&lt;/p&gt;&#xA;&lt;p&gt;This one shows VGA (15-pin blue connector), HDMI, Display Port and LVDS (laptop screen):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr -q | grep 'VGA\|HDMI\|DP\|LVDS'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This is a sample command to turn off LVDS-1 and enable VGA-1:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output LVDS-1 --off --output VGA-1 --auto&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To switch back:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output VGA-1 --off --output LVDS-1 --auto&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You must combine and replace VGA-1 with the output name for your external screen. I hope I explained it enough clear.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-04T13:20:10.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25121" PostTypeId="2" ParentId="25117" CreationDate="2020-07-04T13:26:36.443" Score="0" Body="&lt;p&gt;There is ongoing work to support this. See the developers git resource: &lt;a href=&quot;https://github.com/elementary/appcenter/pull/1308&quot; rel=&quot;nofollow noreferrer&quot;&gt;Support systemwide flatpaks&lt;/a&gt; I can't give a specific date as to when that feature would be ready, but I would hope it would be complete by the release of elementary OS 6.0.&lt;/p&gt;&#xA;&lt;p&gt;Old post from omgubuntu: &lt;a href=&quot;https://www.omgubuntu.co.uk/2019/11/elementary-os-flatpak-support&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS Now Has Support for Flatpak Apps&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-04T13:26:36.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25122" PostTypeId="2" ParentId="25114" CreationDate="2020-07-04T15:17:57.200" Score="0" Body="&lt;p&gt;I now have an answer to my own question. Being new to Linux I am still in the initial learning phase so I made a silly error. The first two code for &amp;quot;xranr newmode&amp;quot; &amp;amp; &amp;quot;xrandr addmode&amp;quot; are correct but I needed to create a new.sh file in  /etc/profile.d/&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/profile.d/external_monitor_resol.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;into which the above newmode &amp;amp; addmode code is entered and the resulting file saved. In the end I now have 1920x1080 as an option in Displays and it survives restarts and shut downs.&lt;/p&gt;&#xA;" OwnerUserId="23378" LastActivityDate="2020-07-04T15:17:57.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25125" PostTypeId="2" ParentId="24662" CreationDate="2020-07-04T18:28:04.917" Score="0" Body="&lt;p&gt;My answer to a somewhat related eOS &lt;a href=&quot;https://elementaryos.stackexchange.com/a/23893/13836&quot;&gt;login/bootup question&lt;/a&gt; may be of help.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Depending on how you've originally installed eOS there's a good chance you can boot into a 'recovery mode' (via the Grub menu) which is normally....&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="13836" LastActivityDate="2020-07-04T18:28:04.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25126" PostTypeId="2" ParentId="25112" CreationDate="2020-07-04T18:36:38.450" Score="1" Body="&lt;p&gt;When you will start Elementary OS, before you will login, I mean before you will type login / username and password, press combination of ctrl+alt+F1 to F6, usually I press F4. It will show you the terminal. Login there, I mean type your login and password, then type this in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/at-spi-dbus-bus.desktop /etc/xdg/autostart/at-spi-dbus-bus.disabled.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It will ask for the password, which is actually the password you are using to login.&lt;/p&gt;&#xA;&lt;p&gt;Then press ctr+alt+F7 to go back to GUI. Login and let me know did it solve the issue permanently.&lt;/p&gt;&#xA;&lt;p&gt;You can reboot few times to check it.&lt;/p&gt;&#xA;&lt;p&gt;What is funny, is the fact that this is really old bug.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/elementaryos/+bug/1596377&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported bug&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-04T18:36:38.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25127" PostTypeId="2" ParentId="25111" CreationDate="2020-07-04T20:38:26.033" Score="0" Body="&lt;p&gt;To boot into single user mode you edit the boot instructions for the GRUB menu entry you wish to boot and add the kernel parameter/option single. Brief instructions for how to do this are below.&lt;/p&gt;&#xA;&lt;p&gt;Turn on laptop and wait when GRUB menu will appear. Select (highlight) the GRUB boot menu entry you wish to use. Use the first one entry in this case.&lt;/p&gt;&#xA;&lt;p&gt;Press e to edit the GRUB boot commands for the selected boot menu entry.&lt;/p&gt;&#xA;&lt;p&gt;Look near the bottom of the list of commands for lines similar to&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;linux /boot/vmlinuz-5.7.0 root=UUID=bc6f8146-1523-46a6-8b&lt;br /&gt;&#xA;6a-64b819ccf2b7 ro quiet splash initrd /boot/initrd.img-5.7.0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Change the line by removing quiet splash and by adding the kernel boot parameter single to the end of the line (it should look exactly like this: ro single).&lt;/p&gt;&#xA;&lt;p&gt;For this example you would change:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;6a-64b819ccf2b7 ro quiet splash&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;6a-64b819ccf2b7 ro single&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Press either Ctrl+X or F10 to boot using these kernel options.&lt;/p&gt;&#xA;&lt;p&gt;Note: These changes are not persistent. Any change to the kernel boot options made this way will only affect the next boot and only if you start that boot by pressing either Ctrl+X or F10 while still in GRUB edit mode.&lt;/p&gt;&#xA;&lt;p&gt;Then run the system and see errors on the screen and provide a photo of the screen with errors or information the system shows.&lt;/p&gt;&#xA;&lt;p&gt;Then you should hit Enter to go into maintenance mode and type in terminal.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;journalctl -xb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and hit Enter.&lt;/p&gt;&#xA;&lt;p&gt;It will show you all information from the boot start process to the end, I mean to the moment you hit Enter to go into maintenance mode. To quit viewing hit q.&lt;/p&gt;&#xA;&lt;p&gt;Provide screenshots. Use arrows or PgUp PgDown to scroll text in the screen.&lt;/p&gt;&#xA;&lt;p&gt;To restart type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And hit Enter.&lt;/p&gt;&#xA;&lt;p&gt;Then you can repeat all steps but instead of hitting Enter, hit Ctrl+d to run the system.&lt;/p&gt;&#xA;&lt;p&gt;See will it load with default options.&lt;/p&gt;&#xA;&lt;p&gt;The same effect you will achieve when you will hit Enter instead Ctrl+d and then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemctl default &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and hit Enter.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-04T21:23:50.197" LastActivityDate="2020-07-04T21:23:50.197" CommentCount="17" ContentLicense="CC BY-SA 4.0" />
  <row Id="25128" PostTypeId="1" CreationDate="2020-07-04T20:40:09.337" Score="0" ViewCount="64" Body="&lt;p&gt;I have tried all the examples on this forum but still no avail.&lt;/p&gt;&#xA;&lt;p&gt;I have nfs-common install and edited my /etc/fstab file with these lines to mount my two shares.&lt;/p&gt;&#xA;&lt;p&gt;192.168.1.5:/data/Music /mnt/LIBATNETNAS/Music nfs user,noauto,rsize=8192,wsize=8192,timeo=14,intr&#xA;192.168.1.5:/data/Videos /mnt/LIBATNETNAS/Videos nfs user,noauto,rsize=8192,wsize=8192,timeo=14,intr&#xA;192.168.1.5:/data/Documents /mnt/LIBATNETNAS/Documents nfs user,noauto,rsize=8192,wsize=8192,timeo=14,intr&lt;/p&gt;&#xA;&lt;p&gt;It just doesn't mount at startup, while mounting them individually works.&lt;/p&gt;&#xA;&lt;p&gt;I can even use this command manually and it works.&lt;/p&gt;&#xA;&lt;p&gt;sudo mount -t nfs 192.168.1.5:/data/Music /mnt/LIBATNETNAS/Music &amp;amp;&amp;amp; sudo mount -t nfs 192.168.1.5:/data/Videos /mnt/LIBATNETNAS/Videos &amp;amp;&amp;amp; sudo mount -t nfs 192.168.1.5:/data/Documents /mnt/LIBATNETNAS/Documents&lt;/p&gt;&#xA;&lt;p&gt;It just doesn't work at startup on Elementary OS, all other distros work which is a bit frustrating.&lt;/p&gt;&#xA;&lt;p&gt;I hope anyone can help.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!!!&lt;/p&gt;&#xA;" OwnerUserId="23387" LastActivityDate="2024-03-16T11:09:16.253" Title="NFS Shares from my NAS doesn't appear at startup" Tags="|networking|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25129" PostTypeId="2" ParentId="25128" CreationDate="2020-07-04T21:19:43.427" Score="0" Body="&lt;p&gt;Try this way. Delete those three entries from nfsdb file and add instead of them these three:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Music       -fstype=nfs4,rw,soft,intr   192.168.1.5:/data/Music &#xA;Videos      -fstype=nfs4,rw,soft,intr   192.168.1.5:/data/Videos &#xA;Documents   -fstype=nfs4,rw,soft,intr   192.168.1.5:/data/Documents&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;One below other, probably the first one is working and other two not, because they are not below. If nfs4 will not work, change it to nfs.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-04T21:19:43.427" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25131" PostTypeId="2" ParentId="25086" CreationDate="2020-07-04T22:07:12.813" Score="-1" Body="&lt;p&gt;Open terminal to remove zoom. Type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge zoom&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Download the package for Ubuntu (64 bit, version 14.04+) from here: &lt;a href=&quot;https://zoom.us/download?os=linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://zoom.us/download?os=linux&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Open terminal&lt;/p&gt;&#xA;&lt;p&gt;type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;&#xA;cd Downloads&#xA;&#xA;sudo apt install -y libglib2.0-0  libxcb-shape0 libxcb-shm0 libxcb-xfixes0 libxcb-randr0 libxcb-image0 libfontconfig1 libgl1-mesa-glx libxi6 libsm6 libxrender1 libpulse0 libxcomposite1 libxslt1.1 libsqlite3-0 libxcb-keysyms1 libxcb-xtest0 libegl1-mesa libxcb-xtest0&#xA;&#xA;sudo dpkg -i zoom_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Wait when it will finish installation without errors. It takes even up to 5 minutes.&lt;/p&gt;&#xA;&lt;p&gt;I have a normal resolution after I installed it correctly.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/K8N8b.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K8N8b.jpg&quot; alt=&quot;Zoom normal resolution&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-04T22:07:12.813" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25132" PostTypeId="1" CreationDate="2020-07-05T06:16:52.503" Score="0" ViewCount="884" Body="&lt;p&gt;I couldn't be able to remove the default files app of elementary. whenever I from terminal it says&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;E: Unable to locate package io.elementary.files&lt;br /&gt;&#xA;E: Couldn't find any package by glob 'io.elementary.files'&lt;br /&gt;&#xA;E: Couldn't find any package by regex 'io.elementary.files'&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and in appcenter it says&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Application state not set as installed in AppCenter for package: Files&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23158" LastActivityDate="2024-03-16T16:04:45.587" Title="Elementaryos Hera couldn't remove default elementaryos apps" Tags="|files|default|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25133" PostTypeId="2" ParentId="25132" CreationDate="2020-07-05T06:35:23.577" Score="0" Body="&lt;p&gt;&lt;strong&gt;How to remove any package from the system using terminal.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Proper way is to type in terminal :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge nameoftheapp &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-05T07:22:49.927" LastActivityDate="2020-07-05T07:22:49.927" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25134" PostTypeId="2" ParentId="25132" CreationDate="2020-07-05T06:45:00.090" Score="0" Body="&lt;p&gt;&lt;strong&gt;How to install the Elementary OS App Center&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install dependcies:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y libaccountsservice-dev libgdk-pixbuf2.0-dev libgranite-dev libgtk-3-dev liblightdm-gobject-1-dev libwingpanel-2.0-dev libx11-dev meson valac libmutter-2-0 libmutter-2-dev libcanberra-dev libcloudproviders-dev libdbus-glib-1-dev libgail-3-dev libgee-0.8-dev libglib2.0-dev libnotify-dev libpango1.0-dev libplank-dev libsqlite3-dev libunity-dev libzeitgeist-2.0-dev libappstream-dev gettext libflatpak-dev libhandy-0.0-dev libjson-glib-dev libpackagekit-glib2-dev libpolkit-gobject-1-dev libsoup2.4-dev libxml2-dev libxml2-utils libhandy-0.0 libpackagekit-glib2-dev appstream-util&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Update the system:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type following commands in terminal one by one:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd &#xA;cd Downloads&#xA;wget https://github.com/elementary/appcenter/archive/master.zip&#xA;unzip master.zip&#xA;cd appcenter-master&#xA;meson build --prefix=/usr &#xA;cd build &#xA;ninja&#xA;sudo ninja install io.elementary.appcenter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-05T07:40:42.370" LastActivityDate="2020-07-05T07:40:42.370" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="25135" PostTypeId="2" ParentId="25132" CreationDate="2020-07-05T06:53:28.827" Score="0" Body="&lt;p&gt;&lt;strong&gt;How to install Elementary OS Files App.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install dependcies:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y libaccountsservice-dev libgdk-pixbuf2.0-dev libgranite-dev libgtk-3-dev liblightdm-gobject-1-dev libwingpanel-2.0-dev libx11-dev meson valac libmutter-2-0 libmutter-2-dev libcanberra-dev libcloudproviders-dev libdbus-glib-1-dev libgail-3-dev libgee-0.8-dev libglib2.0-dev libnotify-dev libpango1.0-dev libplank-dev libsqlite3-dev libunity-dev libzeitgeist-2.0-dev libhandy-0.0 libpackagekit-glib2-dev appstream-util&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Update the system:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt upgrade&#xA;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then in terminal type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd &#xA;cd Downloads&#xA;wget https://github.com/elementary/files/archive/master.zip&#xA;unzip master.zip&#xA;cd files-master&#xA;meson build --prefix=/usr &#xA;cd build &#xA;ninja&#xA;sudo ninja install io.elementary.files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-05T07:40:56.417" LastActivityDate="2020-07-05T07:40:56.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25136" PostTypeId="2" ParentId="21055" CreationDate="2020-07-05T10:41:22.877" Score="1" Body="&lt;p&gt;I can't comment yet, because I just created an account to reply to this. I also have the same issue in eOS Hera. It's very frustrating.&lt;/p&gt;&#xA;&lt;p&gt;Edit: Actually, I seem to have found a temporary workaround, courtesy of the &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1603430&quot; rel=&quot;nofollow noreferrer&quot;&gt;launchpad bug tracker&lt;/a&gt;. Try going to the Hamburger menu -&amp;gt; Customise, then down the bottom untick &amp;quot;Title Bar&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;This has so far worked for me, but obviously losing the title bar may not be to your liking.&lt;/p&gt;&#xA;" OwnerUserId="23390" LastEditorUserId="23390" LastEditDate="2020-07-05T10:50:10.180" LastActivityDate="2020-07-05T10:50:10.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25138" PostTypeId="2" ParentId="24965" CreationDate="2020-07-05T16:52:37.820" Score="0" Body="&lt;p&gt;You could install desktop folder from the AppCenter&lt;/p&gt;&#xA;" OwnerUserId="23393" LastActivityDate="2020-07-05T16:52:37.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25139" PostTypeId="2" ParentId="24965" CreationDate="2020-07-05T17:09:38.540" Score="0" Body="&lt;p&gt;You could install desktop folder from the AppCenter or from a .deb file which wil be available onine.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastActivityDate="2020-07-05T17:09:38.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25140" PostTypeId="1" CreationDate="2020-07-06T00:26:15.147" Score="0" ViewCount="25" Body="&lt;p&gt;How do I add nice values to an app in the docker so it can launch every time with having to run terminal  i.e. nice firefox -20  I am looking specifically at elementary os docker and how to add the execution command within the docker.&lt;/p&gt;&#xA;" OwnerUserId="23396" LastEditorUserId="23396" LastEditDate="2020-07-06T12:56:45.143" LastActivityDate="2020-07-06T12:56:45.143" Title="How do I add nice values to a plank docker app so they execute on launch without having to enter the command in terminal every time" Tags="|plank|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25141" PostTypeId="1" CreationDate="2020-07-06T02:38:45.073" Score="1" ViewCount="2096" Body="&lt;p&gt;In my display settings, it states, &amp;quot;Unknown Display&amp;quot;. How do I fix this?&#xA;My monitor is 2560x1440 and the given resolutions are only 16:10 or 4:3 aspect ratios, none of which match my screen aspect ratio.&#xA;I was hoping if I can get Linux to detect my display, it will adjust the resolution accordingly.&lt;/p&gt;&#xA;&lt;p&gt;P.S. I'm brand new to Linux.&lt;/p&gt;&#xA;" OwnerUserId="23397" LastActivityDate="2020-07-15T00:16:29.003" Title="How do I get Elementary OS to detect my display?" Tags="|display|resolution|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25142" PostTypeId="2" ParentId="25141" CreationDate="2020-07-06T03:36:23.023" Score="2" Body="&lt;p&gt;I’m also new to Linux and just posted a very similar question recently. I answered my own post with what worked for me. The research was challenging but once discovered the solution was easy. Here is my post link...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/25114/how-to-add-1920x1080-display-option-and-make-it-survive-restart&quot;&gt;How to add 1920x1080 Display option and make it survive restart&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also a link to where I found the answer...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://ubuntuhandbook.org/index.php/2017/04/custom-screen-resolution-ubuntu-desktop/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ubuntuhandbook.org/index.php/2017/04/custom-screen-resolution-ubuntu-desktop/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you read the second link first it may give my post some context. If this doesn’t provide enough assistance let me know and I will offer more precise guidance. Sleep is upon me!&lt;/p&gt;&#xA;&lt;p&gt;Edit:&#xA;Here is an additional link with the info you need...&#xA;&lt;a href=&quot;https://www.tecmint.com/set-display-screen-resolution-in-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.tecmint.com/set-display-screen-resolution-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please note that in my case, the code used to create the new .sh file in profile.d (namely this code):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vim /etc/profile.d/external_monitor_resol.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;is to use vim text editor. I think Elementary comes with gedit text editor so I used this code in place of the example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gedit /etc/profile.d/external_monitor_resol.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That opens a new file that you will add the newmode &amp;amp; addmode codes and you simply press save and the file called external_monitor__resol.sh will be created and saved in the profile.d folder within etc.&lt;/p&gt;&#xA;&lt;p&gt;I hope that is helpful.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kjEFU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kjEFU.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23378" LastEditorUserId="23378" LastEditDate="2020-07-06T16:25:06.593" LastActivityDate="2020-07-06T16:25:06.593" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25143" PostTypeId="1" CreationDate="2020-07-06T04:11:00.233" Score="0" ViewCount="17" Body="&lt;p&gt;I'm pretty new to this, so please bear with me.&lt;/p&gt;&#xA;&lt;p&gt;Here's the error message from AppCentre: :&lt;/p&gt;&#xA;&lt;p&gt;Type 'Reading' is not known on line 2 in source list /etc/apt/sources.list.d/signal-xenial.list&#xA;E: The list of sources could not be read&lt;/p&gt;&#xA;&lt;p&gt;Also, when I click on the 'Installed' list, nothing comes up, except the icon for 'Operating System Updates'&lt;/p&gt;&#xA;&lt;p&gt;Steam was the last app I installed, but that was a few days ago. Any help is much appreciated!&lt;/p&gt;&#xA;" OwnerUserId="23398" LastActivityDate="2020-07-06T04:11:00.233" Title="Failed to fetch updates. E: the list of sources could not be read and all the apps are missing from the installed list. Any help for a newbie?" Tags="|appcenter|sources|error|" AnswerCount="0" CommentCount="2" ClosedDate="2020-07-07T05:40:13.713" ContentLicense="CC BY-SA 4.0" />
  <row Id="25144" PostTypeId="2" ParentId="24624" CreationDate="2020-07-06T09:15:07.540" Score="1" Body="&lt;p&gt;I had the same issue.&lt;/p&gt;&#xA;&lt;p&gt;Apparmor is blocking the bind of a unix-socket at /tmp/&lt;/p&gt;&#xA;&lt;p&gt;You can whitelist that by adding the following line to &lt;code&gt;/etc/apparmor.d/lightdm-guest-session&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;unix (bind, listen) type=stream addr=&amp;quot;@/tmp/applications-menu-*&amp;quot;,&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23401" LastEditorUserId="26" LastEditDate="2020-07-07T05:39:10.110" LastActivityDate="2020-07-07T05:39:10.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25146" PostTypeId="2" ParentId="21055" CreationDate="2020-07-06T13:22:14.210" Score="0" Body="&lt;p&gt;This indeed worked for me, thanks so much @skrallex. I also discovered a solution which was install a custom theme for firefrox that makes it look like the default browser.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Zonnev/elementaryos-firefox-theme&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Zonnev/elementaryos-firefox-theme&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2020-07-06T13:22:14.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25149" PostTypeId="1" CreationDate="2020-07-07T07:20:10.947" Score="1" ViewCount="95" Body="&lt;p&gt;I'm experiencing an unusual CPU usage on pantheon-mail idle - (40% - 50% of CPU or higher). However, when the process is killed, everything goes smoothly (as usual). This high CPU usage reduces significantly my laptop's battery life (instead of having screen 7-8 hours I'm getting about 3-4h). Any ideas about how to get rid of it without constantly killing the process? (once killed, no notifications pop up...etc, so I'd like to keep the default settings...).&lt;/p&gt;&#xA;" OwnerUserId="23407" LastActivityDate="2024-03-22T19:04:40.570" Title="high CPU usage on pantheon-mail idle" Tags="|release-hera|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25150" PostTypeId="2" ParentId="25039" CreationDate="2020-07-07T08:25:20.387" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://download.teamviewer.com/download/linux/teamviewer_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open the AppCenter and install &lt;strong&gt;Eddy&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;Open the download with Eddy&lt;/li&gt;&#xA;&lt;li&gt;Hit install&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26" LastActivityDate="2020-07-07T08:25:20.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25151" PostTypeId="1" CreationDate="2020-07-07T10:20:27.917" Score="0" ViewCount="142" Body="&lt;p&gt;I installed elementary Os again a fresh install but after installation when i headed to app centre for updates it says failed to fetch updates. This happens to me everytime when i install elementary but everytime the cause is different now its an icon is not yet available. Also this is my second fresh install of the day the 1st time i did i updates using terminal but this same error popped up so i started started again and so hear i am. This is the 13th time thsi has happened to me this year.Is is something to do with me ,is it my fault for not doing something right?&lt;a href=&quot;https://i.stack.imgur.com/wCCVB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wCCVB.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uzb1e.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uzb1e.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23408" LastActivityDate="2024-03-19T04:09:21.107" Title="Failed to fetch updates Again!" Tags="|updates|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25152" PostTypeId="2" ParentId="25086" CreationDate="2020-07-07T11:21:17.277" Score="3" Body="&lt;p&gt;For anyone else that might experience this, here's the answer I learned:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I ended up creating a file at ~/.config/zoomus.conf:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[General]&#xA;autoScale=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2020-07-07T11:21:17.277" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25153" PostTypeId="2" ParentId="25151" CreationDate="2020-07-07T16:53:03.780" Score="0" Body="&lt;p&gt;As explained &lt;a href=&quot;https://askubuntu.com/questions/41605/trouble-downloading-packages-list-due-to-a-hash-sum-mismatch-error/&quot;&gt;here&lt;/a&gt;, hash sum mismatch errors are usually more typical for clients behind proxy caches. To solve the issue, remove all the content of &lt;code&gt;/var/lib/apt/lists directory&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Type in the terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -rf /var/lib/apt/lists/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It should solve the issue. Ask your Internet Service Provider do they use some proxy. If yes. Then ask can they disable proxy for you.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-07T16:53:03.780" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25155" PostTypeId="1" CreationDate="2020-07-07T21:04:50.430" Score="0" ViewCount="49" Body="&lt;p&gt;I had a problem installing &lt;a href=&quot;https://flavio.tordini.org/musique&quot; rel=&quot;nofollow noreferrer&quot;&gt;Musique&lt;/a&gt; in Elmentary OS 5.1. Finally the only way I could execute the app is typing the following commands on a terminal &lt;code&gt;source /opt/qt512/bin/qt512-env.sh &amp;amp;&amp;amp; musique&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;The musique app on the slingshot do not start. My question is how to create a desktop shorcut for the custom terminal command &lt;code&gt;source /opt/qt512/bin/qt512-env.sh &amp;amp;&amp;amp; musique&lt;/code&gt; and add this shorcut to the Elementary slingshot?&lt;/p&gt;&#xA;&lt;p&gt;I have tried so many things with Appeditor and editing the .desktop file of Musique but nothing worked. Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="23410" LastActivityDate="2024-03-19T17:01:15.200" Title="How to create a desktop or plank shortcut for Musique (Flavio Tordini app)?" Tags="|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25157" PostTypeId="2" ParentId="25155" CreationDate="2020-07-08T09:05:56.390" Score="0" Body="&lt;p&gt;Open AppEditor and make a new entry.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sh -c &amp;quot;source /opt/qt512/bin/qt512-env.sh &amp;amp;&amp;amp; musique&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-07-08T09:05:56.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25158" PostTypeId="1" CreationDate="2020-07-08T17:07:56.077" Score="0" ViewCount="305" Body="&lt;p&gt;I'm tring to change the theme for default Terminal app, the commands seem to run without throwing errors, yet nothing happens.&#xA;I tried running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings foreground 'rgb(46, 46, 46)'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;also this bash script, but nothing takes effect:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;palette=&amp;quot;#121C21:#E44754:#89BD82:#F7BD51:#5486C0:#B77EB8:#50A5A4:#FFFFFF:#52606B:#E44754:#89BD82:#F7BD51:#5486C0:#B77EB8:#50A5A4:#FFFFFF&amp;quot;&#xA;foreground=&amp;quot;#B3B8C3&amp;quot;&#xA;background=&amp;quot;#121B21&amp;quot;&#xA;cursor=&amp;quot;#E95420&amp;quot;&#xA;darkstyle=&amp;quot;true&amp;quot; # true or false&#xA;&#xA;gsettings set io.elementary.terminal.settings palette &amp;quot;$palette&amp;quot;&#xA;gsettings set io.elementary.terminal.settings foreground &amp;quot;$foreground&amp;quot;&#xA;gsettings set io.elementary.terminal.settings background &amp;quot;$background&amp;quot;&#xA;gsettings set io.elementary.terminal.settings cursor-color &amp;quot;$cursor&amp;quot;&#xA;gsettings set io.elementary.terminal.settings prefer-dark-style &amp;quot;$darkstyle&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;installing &lt;code&gt;dconf-tools&lt;/code&gt; and setting the values from there works, but I'm confused as to why &lt;code&gt;gsetting set&lt;/code&gt; commands aren't doing anything.&lt;/p&gt;&#xA;" OwnerUserId="22175" LastEditorUserId="22175" LastEditDate="2020-07-09T00:37:05.833" LastActivityDate="2024-03-25T11:02:45.360" Title="Customizing Elementary OS 5.1 Terminal Not Working" Tags="|release-hera|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25159" PostTypeId="1" CreationDate="2020-07-09T06:37:12.003" Score="0" ViewCount="68" Body="&lt;p&gt;Anybody got luck in ElementaryOS running Da Vinci Resolve 16? I can't get it to start even.&lt;/p&gt;&#xA;" OwnerUserId="23416" LastActivityDate="2021-12-12T09:12:42.160" Title="Da Vinci resolve would not even start" Tags="|video-editor|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25160" PostTypeId="1" CreationDate="2020-07-09T07:03:16.370" Score="0" ViewCount="30" Body="&lt;p&gt;I have been using eOS as my everyday OS for a couple of weeks now and noticed multiple possible small additions, of which I think would make a great improvement while not being too hard to implement(?).&lt;/p&gt;&#xA;&lt;p&gt;So my question is where would be the place to make these kind of suggestions?&lt;/p&gt;&#xA;" OwnerUserId="20143" LastActivityDate="2020-07-10T10:24:28.230" Title="Where is the best place to suggest features / ask for little quality of life improvments?" Tags="|system|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25161" PostTypeId="2" ParentId="25160" CreationDate="2020-07-09T08:00:39.733" Score="1" Body="&lt;p&gt;This is the place for request/wish and bug reporting: &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-07-09T08:00:39.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25162" PostTypeId="2" ParentId="25159" CreationDate="2020-07-09T08:16:26.060" Score="1" Body="&lt;p&gt;Try start the application up via the terminal. It might tell you what's going on.&lt;/p&gt;&#xA;&lt;p&gt;to list applications: &lt;code&gt;$ ls /usr/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;to run one, use just the name:  &lt;code&gt;$ gtk-launch davinci-resolve&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="13227" LastEditDate="2021-12-12T09:12:42.160" LastActivityDate="2021-12-12T09:12:42.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25163" PostTypeId="1" CreationDate="2020-07-09T08:54:02.113" Score="0" ViewCount="1403" Body="&lt;p&gt;I wanted to add Inkscape repository to download Inkscape 1.0 which is not available in the default elementary repository. Before I've ever done sudo add-apt-repository and it just worked fine. Only recently when I tried to add Krita's repo it didn't work and have some &lt;code&gt;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for elementary/hera&lt;/code&gt; so I did a workaround by manually adding the link to synaptic. But the problem is, ppa for Inkscape is not a http but ppa: and when I tried to manually do the same it couldn't find the repository.&lt;/p&gt;&#xA;&lt;p&gt;Here's the full result of &lt;code&gt;sudo add-apt-repository&lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:inkscape.dev/stable&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Traceback (most recent call last):&#xA;File &amp;quot;/usr/bin/add-apt-repository&amp;quot;, line 107, in &#xA;sp = SoftwareProperties(options=options)&#xA;File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&amp;quot;, line 117, in &lt;strong&gt;init&lt;/strong&gt;&#xA;self.reload_sourceslist()&#xA;File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&amp;quot;, line 612, in reload_sourceslist&#xA;self.distro.get_sources(self.sourceslist)&lt;br /&gt;&#xA;File &amp;quot;/usr/lib/python3/dist-packages/aptsources/distro.py&amp;quot;, line 93, in get_sources&#xA;(self.id, self.codename))&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;aptsources.distro.NoDistroTemplateException: Error: could not find a distribution template for elementary/hera&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;There's a similar question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2914/could-not-find-a-distribution-template-for-ubuntu-n-a-error-in-elementary-os&quot;&gt;here&lt;/a&gt; but I guess it only works for Freya.&lt;/p&gt;&#xA;&lt;p&gt;edit:&lt;/p&gt;&#xA;&lt;p&gt;Here's the output of &lt;code&gt;tail /etc/lsb-release&lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;DISTRIB_ID=elementary&lt;br /&gt;&#xA;DISTRIB_RELEASE=5.1.3&lt;br /&gt;&#xA;DISTRIB_CODENAME=hera&lt;br /&gt;&#xA;DISTRIB_DESCRIPTION=&amp;quot;elementary OS 5.1.3 Hera&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="22638" LastEditorUserId="22638" LastEditDate="2020-07-09T14:49:22.083" LastActivityDate="2024-03-24T14:08:05.990" Title="Can't Add Repository &quot;Could not find a distribution template for elementary/hera&quot;" Tags="|release-hera|ppa|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25164" PostTypeId="2" ParentId="25163" CreationDate="2020-07-09T13:25:31.090" Score="0" Body="&lt;p&gt;Inkscape are availble from Flathub, ready to be installed. ;)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://flathub.org/apps/search/inkscape&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/search/inkscape&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-07-09T13:25:31.090" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25165" PostTypeId="2" ParentId="25141" CreationDate="2020-07-09T15:14:10.520" Score="-1" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;This is truly embarrassing. My monitor is 2560x1440_60.00 so I made&#xA;sure to input my needed resolution in place of your 1920x1080 as well&#xA;as in place of the 1600x900 referenced in the second link. In both&#xA;cases the resolution didn't fill my screen. Furthermore, when I go to&#xA;my display settings in the ElementaryOS Settings page, it doesn't&#xA;display my new 2560x1440 in the list of aspect ratios like you and the&#xA;other article mention. I have no idea what I'm doing wrong here but I&#xA;am beside myself and trying to keep myself from getting frustrated&#xA;despite spending days trying to figure this out. – Natomobile&#xA;yesterday Also, is there a way I can send screenshots? Maybe that will&#xA;help? There doesn't seem to be a clear way for me to reply here in&#xA;StackExchange aside from this &amp;quot;Comments&amp;quot; section.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;It can be exasperating trying to solve these kinds of issues. I should say again I am no expert but I did solve this particular issue on my system. To be clear I am using Elementary OS in virtualbox running OSX on a hackintosh.&lt;/p&gt;&#xA;&lt;p&gt;Let's try and take this a step at a time. First regarding how to properly post here and how to include a screen shot. I think the &amp;quot;add comment&amp;quot; are used to ask for clarification or to point out problems in the post. First press the “Add Another Answer” button then use the 'typing area' between &amp;quot;Your Answer&amp;quot; and &amp;quot;Post Your Answer&amp;quot; to proceed with the conversation. See Pic:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/AxLQb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AxLQb.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt; Note that there are a couple areas when posting. The first is what you are actually typing, the second is a 'preview' of the post appearance once posted. That second area shows up below where you actually type.&lt;/p&gt;&#xA;&lt;p&gt;In order to post a screenshot take a look at the following image:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RnwzW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RnwzW.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;Follow the steps on the image to upload a screenshot. (One quick edit...in step 2 pointing to the image on the toolbar, I should have indicated to click on it to bring up the upload options.)&lt;/p&gt;&#xA;&lt;p&gt;Finally, since this may be getting a bit confusing I'll give you two codes to enter in the terminal in Elementary OS and see if you can upload screenshots of the outputs. It will help me direct you on the next steps. Here is code 1:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Here is code 2:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cvt 2560 1440 60&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Code 1 will tell us all of the current Display aspect ratios. The second will give us info required for the next steps. I await your reply post. Good Luck!&lt;/p&gt;&#xA;" OwnerUserId="23378" LastEditorUserId="23378" LastEditDate="2020-07-09T20:56:34.140" LastActivityDate="2020-07-09T20:56:34.140" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25167" PostTypeId="1" CreationDate="2020-07-10T00:43:20.950" Score="1" ViewCount="47" Body="&lt;p&gt;Would elementary os be a good choice of Linux distros for a corporate setting? I'm just curious.&lt;/p&gt;&#xA;" OwnerUserId="23422" LastActivityDate="2020-07-10T00:43:20.950" Title="Is elementary a Good Choice for a Corporate Setting?" Tags="|settings|system|networking|security|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25168" PostTypeId="1" CreationDate="2020-07-10T04:43:02.090" Score="0" ViewCount="147" Body="&lt;p&gt;wifi not working after sleep/ suspend. the only solution that works for me is to reboot the system. please provide a permanent solution. I am using HP laptop and recently switched to elementary hera from windows 10. any solution please ?&lt;/p&gt;&#xA;" OwnerUserId="23425" LastActivityDate="2024-03-21T11:06:36.387" Title="wifi not working after sleep/ suspend" Tags="|release-hera|wifi|suspend|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25169" PostTypeId="2" ParentId="25168" CreationDate="2020-07-10T05:04:16.163" Score="0" Body="&lt;p&gt;First solution is to type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i /bin/systemctl enable wifi-resume.service exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If this will not work, then below you have solution.&lt;/p&gt;&#xA;&lt;p&gt;Second solution is to create a file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/pm/sleep.d/10_resume_wifi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Paste below this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;case &amp;quot;${1}&amp;quot; in&#xA;   resume|thaw) &#xA;    nmcli radio wifi off &amp;amp;&amp;amp; nmcli radio wifi on;; &#xA;esac &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Ctrl+o to save, Ctrl+x to exit.&lt;/p&gt;&#xA;&lt;p&gt;Then type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x /etc/pm/sleep.d/10_resume_wifi &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to make the file executable&lt;/p&gt;&#xA;&lt;p&gt;If this will not work put this into the file mentioned above:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash &#xA;case $1 in&#xA;    resume|thaw)&#xA;        nmcli radio wifi off &amp;amp;&amp;amp; nmcli radio wifi on;; &#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If it will not work, put this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash &#xA;case $1 in&#xA;    post|resume|thaw) &#xA;        nmcli radio wifi off &amp;amp;&amp;amp; nmcli radio wifi on;; &#xA;esac &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-10T05:16:17.477" LastActivityDate="2020-07-10T05:16:17.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25171" PostTypeId="2" ParentId="25160" CreationDate="2020-07-10T10:24:28.230" Score="1" Body="&lt;p&gt;As stated in the other answer, GitHub is the correct place to raise feature requests. Additionally, there is a utility built into the OS that takes you to the right GitHub repository (page).&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Open System Settings → About → Report a Problem&#xA;Choose the appropriate category and component&#xA;Follow the prompts to report a problem&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-07-10T10:24:28.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25172" PostTypeId="1" CreationDate="2020-07-10T12:47:48.033" Score="1" ViewCount="85" Body="&lt;p&gt;Is there a way to delay applications on the startup? I have a Nimbus installed (Weather widget) and set-up to start on the startup, but it looks like Nimbus actually starts before my Wi-Fi is done connecting to the network. So I only get 0 temperature on my widget.&lt;/p&gt;&#xA;&lt;p&gt;It isn't a big deal, but i would be nice to have accurate temperature after every boot. This problem can be solved by reopening application, but it isn't aesthetic enough. We all know that eOS is all about aesthetics.&lt;/p&gt;&#xA;" OwnerUserId="23405" LastActivityDate="2024-03-22T01:03:25.540" Title="Delaying startup applications" Tags="|startup|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25173" PostTypeId="2" ParentId="25172" CreationDate="2020-07-10T14:40:07.467" Score="0" Body="&lt;pre&gt;&lt;code&gt;cd&#xA;nano autostart.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Put this into the file&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;name_of_the_app &amp;amp; sleep 10s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save with ctrl+o&#xA;Exit with ctrl+x&lt;/p&gt;&#xA;&lt;p&gt;Make the file executable:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod +x autostart.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Add autostart.sh to autostart.&lt;/p&gt;&#xA;&lt;p&gt;Go to system settings -&amp;gt; Applications -&amp;gt; Startup tab&lt;/p&gt;&#xA;&lt;p&gt;Click directory plus icon (bottom left corner)&lt;/p&gt;&#xA;&lt;p&gt;Type in custom command instead of Search applications. See image. &lt;a href=&quot;https://i.stack.imgur.com/2Fmq0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2Fmq0.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Type there:&lt;/p&gt;&#xA;&lt;p&gt;/home/yourusername/autostart.sh&lt;/p&gt;&#xA;&lt;p&gt;Delete the previously added nimbus app from the autostart and leave only autostart.sh script for this nimbus app.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-10T14:40:07.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25174" PostTypeId="2" ParentId="25158" CreationDate="2020-07-10T14:48:39.810" Score="0" Body="&lt;p&gt;Probably the only one correct way is to do this way:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gsettings set io.elementary.terminal.settings background 'rgb(46, 46, 46,0.95)' &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The last position 0.95 is about transparency. Less value means more transparent background.&lt;/p&gt;&#xA;&lt;p&gt;Settings work only after the restart of the system, so each time you need to restart if you are changing values.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-10T14:48:39.810" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25175" PostTypeId="1" CreationDate="2020-07-10T15:19:33.190" Score="0" ViewCount="97" Body="&lt;p&gt;When I use Firefox in fullscreen-mode (by pressing f11) and I hover my mouse on the top of the screen to display the navigation/bookmarks bar, the app shows minimise/maximise/quit buttons that clearly belong to Windows (see image below). Even more interestingly, they work like you expect them to work. This isn't bothering me in any way, but I'd like to know why this is possible and how Windows-style buttons have ended up in Linux/eOS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NeRam.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NeRam.png&quot; alt=&quot;windows-style buttons in linux firefox&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22405" LastActivityDate="2024-03-22T02:07:45.843" Title="Windows-like buttons in Firefox when on fullscreen mode" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25176" PostTypeId="2" ParentId="25175" CreationDate="2020-07-10T16:08:29.090" Score="0" Body="&lt;p&gt;Explanation comes from your theme. I suppose you are not using the default Elementary OS themes, but the different one.&lt;/p&gt;&#xA;&lt;p&gt;There is also explanation about the firefox title bar below.&lt;/p&gt;&#xA;&lt;p&gt;How to get rid of huge firefox title bar.&lt;/p&gt;&#xA;&lt;p&gt;Just click the top-right menu (the hamburger(☰) menu) &amp;gt; Customize, you’ll be at the Customize Firefox page, on the bottom-left most, unchecked the Title Bar.&#xA;That’s it &lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jAlq8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jAlq8.jpg&quot; alt=&quot;Firefox Title Bar&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://askubuntu.com/questions/979968/how-to-hide-title-bar-in-firefox-57-quantum&quot;&gt;https://askubuntu.com/questions/979968/how-to-hide-title-bar-in-firefox-57-quantum&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Additionally if you will install Elementary OS Tweaks and open it, go to Appearance, you will have a layout which can be changed. You can choose from the dropdown menu which layout you want to use.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/seDaI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/seDaI.png&quot; alt=&quot;Elementary OS Tweaks layout&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Eventually Firefox has these buttons built-in. Will check this later and update thread.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-10T16:24:27.233" LastActivityDate="2020-07-10T16:24:27.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25177" PostTypeId="1" CreationDate="2020-07-10T16:20:11.260" Score="0" ViewCount="20" Body="&lt;p&gt;after searching the net I decided to post my problem here.&lt;/p&gt;&#xA;&lt;p&gt;I'm trying to install Elementary OS with a CD , dual boot with windows 10.&lt;br /&gt;&#xA;Created a 2nd partition, on which I'm trying to install it.&lt;br /&gt;&#xA;I burnt the ISO via Windows Explorer.&lt;br /&gt;&#xA;I can start the Installation,&lt;br /&gt;&#xA;during loading, before the installer menu this signal appears:&#xA;&lt;a href=&quot;https://elementaryforums.com/index.php?attachments/upload_2020-7-10_18-0-14-png.351/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementaryforums.com/index.php?attachments/upload_2020-7-10_18-0-14-png.351/&lt;/a&gt;&#xA;and then disappears. NOTE: an USB stick is not connected.&lt;br /&gt;&#xA;when it gets to the part of installing on which partition and choosing next,&#xA;the installer crashes,&lt;/p&gt;&#xA;&lt;p&gt;It happens while using the option of installing it next to the windows or on a second partition.&#xA;no error signal, the monitor shuts down but the computer itself doesn't but it seems that the processor and DVD drive become very silent and stop.&lt;/p&gt;&#xA;&lt;p&gt;When I use the trial mode over the DVD the systems crashes after some time, randomly. The computer doesn't completely shut down, like previously it seems only the processor and DVD drive.&#xA;I met problems also with UBUNTU, which I tried to install afterwards. But Ubuntu doesn't even let me into the menu, the loading screen appears, then the monitor shuts off, the DVD drive begins to work very loudly for a couple of minutes and then everything shutsdown except the computer itself (the light that it's on). It's pretty frustrating.&lt;/p&gt;&#xA;&lt;p&gt;I don't have EFI or UEFI on my system. I use IDE , legacy mode supported, did a RAM check with windows and everything is fine. I would be very glad if you can help me.&lt;/p&gt;&#xA;" OwnerUserId="23432" LastActivityDate="2020-07-10T16:20:11.260" Title="Installer crashes when selecting partition, and using trial mode" Tags="|crash|" AnswerCount="0" CommentCount="14" ContentLicense="CC BY-SA 4.0" />
  <row Id="25178" PostTypeId="1" CreationDate="2020-07-10T18:23:40.060" Score="1" ViewCount="45" Body="&lt;p&gt;When booting up my laptop from power off or hibernated state I am booted into a black screen with a small white under-score in the top left.&#xA;Nothing proceeds to happen.&lt;/p&gt;&#xA;&lt;p&gt;To work around this I power down and boot to grub, then load the previous kernel.&#xA;Does anyone know how to remove the latest kernel, or to block it from booting? How to disable kernel updates until a stable one is released?&lt;/p&gt;&#xA;&lt;p&gt;I have also tried to install Nvidia drivers, which I've seen mentioned as problem software. Is this the case?&#xA;The last possible cause of my boot woes is battery management software. Does anyone know of anything that works and is stable?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&lt;p&gt;Laptop specs:&#xA;Quad-Core Intel® Core™ i7-8550U CPU @ 1.80GHz&#xA;Intel Corporation UHD Graphics 620 (rev 07)&#xA;NVIDIA Corporation GP108M [GeForce MX150] (rev a1)&#xA;16GB memory&lt;/p&gt;&#xA;" OwnerUserId="23435" LastActivityDate="2020-07-10T18:23:40.060" Title="Booting to blank screen eOS 5.1" Tags="|boot|nvidia|kernel|battery|nvidia-driver|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25182" PostTypeId="1" CreationDate="2020-07-11T05:21:59.317" Score="1" ViewCount="1244" Body="&lt;p&gt;I've installed Elementary OS for web development and android development. I usually work with Vscode, terminal and multiple chrome tabs opened. I'm pretty sure that my laptop can handle it. I face lags in vscode and in chrome. Android Studio is also pretty lagging.&lt;/p&gt;&#xA;&lt;p&gt;Spec:&#xA;8gb Ram,&#xA;AMD A10 processor,&#xA;Dedicated Graphics. AMD 530 Graphics 2gb,&#xA;Installed OS on SSD.&#xA;Dual boot with Windows 10&lt;/p&gt;&#xA;" OwnerUserId="23438" LastActivityDate="2022-08-01T16:02:35.273" Title="Elementary OS is slow and unstable" Tags="|laptop|" AnswerCount="4" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="25183" PostTypeId="2" ParentId="25149" CreationDate="2020-07-11T06:05:12.557" Score="0" Body="&lt;p&gt;Switch to Mozilla Thunderbird. Really. Trust me. You can even remove pantheon mail based on Geary Mail from Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-11T06:05:12.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25184" PostTypeId="1" AcceptedAnswerId="25185" CreationDate="2020-07-11T07:54:21.270" Score="0" ViewCount="42" Body="&lt;p&gt;I am using Elementary OS Hera 5.1 and I have a particular problem.When I turn on my PC today I started to hear a voice that read the content of every software that I use.For example,if I go to the File Explorer a voice suddenly start and read the name of my files,and when I change a directory the same thing happens again.Thank you in advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="23439" LastActivityDate="2020-07-11T15:14:23.823" Title="I hear a voice each time I am in application" Tags="|system|sound|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25185" PostTypeId="2" ParentId="25184" CreationDate="2020-07-11T15:14:23.823" Score="1" Body="&lt;p&gt;Looks to me you have enabled the screen reader. To disable it, go to &lt;code&gt;System Settings&lt;/code&gt; -&amp;gt; &lt;code&gt;Universal Access&lt;/code&gt; -&amp;gt; &lt;code&gt;Audio&lt;/code&gt; and turn it off by clicking the slider.&lt;/p&gt;&#xA;&lt;p&gt;Or use the keyboard shortcut &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;S&lt;/kbd&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-07-11T15:14:23.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25187" PostTypeId="2" ParentId="25182" CreationDate="2020-07-11T17:09:09.070" Score="1" Body="&lt;p&gt;&lt;strong&gt;How to upgrade Elementary OS to the newest kernel.&lt;/strong&gt;&lt;/p&gt;&#xA;Install necessary packages&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install build-essential libncurses-dev bison flex libssl-dev libelf-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Make directory for kernel&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /home/yourusername/Downloads/kernel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Download kernel 5.7.8&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/kernel&#xA;wget https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.7.8.tar.xz&#xA;tar -xf linux-5.7.8.tar.xz&#xA;cd linux-5.7.8&#xA;cp -v /boot/config-$(uname -r) .config&#xA;make menuconfig&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save config and then exit. Use tab button to select first the save button, then, OK, then Exit, and once again exit.&lt;/p&gt;&#xA;use 4 core/thread - if your processor have 4 cores&#xA;&lt;pre&gt;&lt;code&gt;make -j 4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;use 8 core/thread - if your processor have 8 cores&#xA;&lt;pre&gt;&lt;code&gt;make -j 8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Type in terminal&#xA;&lt;pre&gt;&lt;code&gt;sudo make modules_install &#xA;sudo make install &#xA;sudo update-initramfs -c -k 5.7.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;ignore these errors below, just because those three bin files are not made yet&#xA;&lt;pre&gt;&lt;code&gt;W: Possible missing firmware /lib/firmware/amdgpu/navi12_ta.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu&#xA;W: Possible missing firmware /lib/firmware/amdgpu/navi12_dmcu.bin for module amdgpu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Update grub entries and restart the computer&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After restart open terminal and type, to check the kernel version:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;to check errors after reboot:&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -xb&#xA;sudo dmesg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T12:45:52.050" LastActivityDate="2020-07-12T12:45:52.050" CommentCount="17" ContentLicense="CC BY-SA 4.0" />
  <row Id="25189" PostTypeId="1" CreationDate="2020-07-11T21:48:18.367" Score="0" ViewCount="46" Body="&lt;p&gt;I just installed EOS Hera 5 on the Thinkpad T460 and EOS runs fine so far but for one issue:&#xA;The wifi gets dropped and picks up in irregular intervals - which is more than annoying.&#xA;I tried the Broadcom proprietary driver install, the battery save settings in BIOS and EOS but nothing works.&#xA;Only when I use my cell as a hotspot will it work fine. Does the distance to the wifi router make it a problem since I don#t get full network bars?&#xA;Any help is greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23445" LastActivityDate="2020-07-11T21:48:18.367" Title="Wifi turns on and off in irregular intervalson Lenovo Thinkpad T460" Tags="|release-hera|wifi|networking|hardware|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25190" PostTypeId="1" AcceptedAnswerId="25215" CreationDate="2020-07-12T03:05:56.240" Score="1" ViewCount="286" Body="&lt;p&gt;I'm running eOS 5.1.6 Hera on Dell XPS 13 (9300) as daily driver and am really enjoying it. That said, after a reboot today the system-wide fonts got completely broken and show as rectangles everywhere in system menus.&lt;/p&gt;&#xA;&lt;p&gt;I tried a bunch of solutions previously suggested, including:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Reinstalling elementary-tweaks/elementary-desktop&lt;/li&gt;&#xA;&lt;li&gt;Resetting the fonts&lt;/li&gt;&#xA;&lt;li&gt;Changing settings of screenshot tool (since there used to be a bug related to it)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I also rebooted system multiple times after each of those attempts. I did not install any specific apps since prior to the issue, but might have updated &lt;code&gt;apt&lt;/code&gt;. Just in case, I was using Inter fonts as system fonts and dark UI theme installed using elementary tweaks and the hack proposed &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/gxhsi9/slowly_losing_dark_theme_with_each_update/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;In addition, when I go to the elementary tweaks interface and try to change the fonts there, the tweaks fail and close immediately. I also noticed that the pre-installed Fonts app does not show any fonts, but the font-manager I installed myself shows the fonts (though the interface and menus fonts are still broken). Also, interestingly, when I login as guest the fonts show up properly, but the Pantheon desktop stops working when I try to use any system interface.&lt;/p&gt;&#xA;&lt;p&gt;I would really appreciate any help with this issue, since I'm new to eOS and wanted to use it as a daily driver, but this issue makes it completely unusable.&lt;/p&gt;&#xA;&lt;h2&gt;UPDATE: Issue solved&lt;/h2&gt;&#xA;&lt;p&gt;&lt;strong&gt;I actually managed to resolve the issue myself by rebuilding the font cache by running &lt;code&gt;sudo fc-cache -f -v&lt;/code&gt; in the terminal session. Still not sure exactly what caused the issue, but this restored all the fonts and now everything works properly.&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22935" LastEditorUserId="22935" LastEditDate="2020-07-12T19:16:54.230" LastActivityDate="2020-07-12T19:32:56.197" Title="System fonts broken on Hera" Tags="|release-hera|plank|pantheon|fonts|" AnswerCount="7" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25191" PostTypeId="1" AcceptedAnswerId="25231" CreationDate="2020-07-12T04:00:20.297" Score="0" ViewCount="79" Body="&lt;p&gt;After I login to my elementary Hera install, I'm able to do most tasks normally, including using indicator panels on wingpanel.  &lt;strong&gt;However, as soon as I try to click on the session indicator to logout/reboot, wingpanel freezes.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Everything else works fine, but I can't use wingpanel at all (searching for applications, using other applets - nothing works).&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;After several minutes, wingpanel is responsive again, and this time, the session indicator is also usable.  This is good till the next time I login.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is what I see in &lt;strong&gt;/var/log/syslog&lt;/strong&gt; around the time I try to use the session indicator for the first time:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Jul 11 23:43:23 elemental PackageKit: daemon start&#xA;Jul 11 23:43:23 elemental dbus-daemon[902]: [system] Successfully activated service 'org.freedesktop.PackageKit'&#xA;Jul 11 23:43:23 elemental systemd[1]: Started PackageKit Daemon.&#xA;Jul 11 23:43:25 elemental io.elementary.a[3271]: ComponentValidator.vala:37: Using .blacklist files is deprecated and will be removed in next version, please use .hiddenapps instead&#xA;Jul 11 23:43:26 elemental PackageKit: get-packages transaction /258_eccabcba from uid 1000 finished with success after 962ms&#xA;Jul 11 23:43:27 elemental PackageKit: search-name transaction /259_dcecabcb from uid 1000 finished with success after 536ms&#xA;Jul 11 23:43:27 elemental PackageKit: get-details transaction /260_ebacebeb from uid 1000 finished with success after 479ms&#xA;Jul 11 23:43:28 elemental PackageKit: get-updates transaction /261_acbbaaaa from uid 1000 finished with success after 660ms&#xA;Jul 11 23:43:29 elemental systemd-resolved[746]: Using degraded feature set (UDP) for DNS server 192.168.86.1.&#xA;Jul 11 23:44:30 elemental plank.desktop[2176]: QApplication: invalid style override passed, ignoring it.&#xA;Jul 11 23:44:30 elemental plank.desktop[2176]:     Available styles: Windows, Fusion&#xA;Jul 11 23:44:30 elemental plank.desktop[2176]: Attribute Qt::AA_ShareOpenGLContexts must be set before QCoreApplication is created.&#xA;Jul 11 23:44:31 elemental plank.desktop[2176]: qrc:/QML/DebugMenu.qml:262: TypeError: Cannot call method 'isWasabiEnabled' of undefined&#xA;Jul 11 23:44:31 elemental plank.desktop[2176]: qrc:/QML/DebugMenu.qml:289: TypeError: Cannot call method 'isSearchInCommunitiesForceEnabled' of undefined&#xA;Jul 11 23:44:31 elemental plank.desktop[2176]: qrc:/QML/DebugMenu.qml:296: TypeError: Cannot call method 'isOOABURISpamCheckerForceEnabled' of undefined&#xA;Jul 11 23:44:31 elemental plank.desktop[2176]: qrc:/QML/DebugMenu.qml:304: TypeError: Cannot call method 'isRateCallQualityForceEnabled' of undefined&#xA;Jul 11 23:44:42 elemental wingpanel[2174]: session_widgets_userbox_update_state: assertion 'self != NULL' failed&#xA;Jul 11 23:44:51 elemental wingpanel[2174]: message repeated 2 times: [ session_widgets_userbox_update_state: assertion 'self != NULL' failed]&#xA;Jul 11 23:45:22 elemental rtkit-daemon[1337]: Supervising 4 threads of 2 processes of 1 users.&#xA;Jul 11 23:45:59 elemental rtkit-daemon[1337]: message repeated 5 times: [ Supervising 4 threads of 2 processes of 1 users.]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'll be happy to provide any more information - I tried uninstalling/re-installing various wingpanel indicators while investigating this, to no avail, before I finally narrowed it down to the session indicator.  Killing wingpanel and manually launching it again didn't help much either.  Thanks!&lt;/p&gt;&#xA;" OwnerUserId="23446" LastActivityDate="2020-07-14T03:03:18.570" Title="Hera: wingpanel-indicator-session freezes for a long time the first time I click on it" Tags="|release-hera|wingpanel|session|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25192" PostTypeId="1" CreationDate="2020-07-12T06:36:58.483" Score="0" ViewCount="56" Body="&lt;p&gt;I have a fresh install of Hera and noticed when I was running a single threaded application that the clock speed of my Intel 1065G7 processor doesn't go above 1300 MHz ever.&lt;/p&gt;&#xA;&lt;p&gt;My temps are 55 C  Maximum after the about an hour of testing.&lt;/p&gt;&#xA;&lt;p&gt;The OS runs my processor @ 500 - 1300 MHz normally during web browsing and and coding.&lt;/p&gt;&#xA;&lt;p&gt;I have tried installing TLP and overriding clock speed manually and setting custom profiles but still doesn't solve the issue.&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated as my productivity has been greatly impacted due to the slow speeds.&lt;/p&gt;&#xA;" OwnerUserId="23447" LastActivityDate="2024-03-23T17:02:00.193" Title="Hera: Intel 1065G7 Stuck Low Clock Speed @ Low Temps" Tags="|intel|temperature|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25193" PostTypeId="1" CreationDate="2020-07-12T06:39:12.340" Score="1" ViewCount="404" Body="&lt;p&gt;I'm somebody who personally likes switching up the UI of my devices every few months, so I recently decided to ditch plank and wingpanel in favor of xfce4-panel. Ditching plank turned out to remove elementary os tweaks as well, but at least I found a hacky method of hiding it so it didn't get in the way, so I didn't even need to uninstall it. Wingpanel proves to be more challenging, as it removes pantheon-xsession-settings and pantheon-shell along with it, therefore preventing me from being able to log in. Unlike Plank, Wingpanel doesn't even have customization in the slightest, so I see no way of removing it or disabling it, and there seems to be no results on Google about it. This is the point where I would switch to Debian but I don't want to go through the work of distro hopping and I don't want to give up Elementary OS's user friendliness. How can I remove wingpanel, or disable it, or at the very least make it completely invisible like I did with Plank?&lt;/p&gt;&#xA;" OwnerUserId="23448" LastEditorUserId="15904" LastEditDate="2020-07-15T06:50:38.480" LastActivityDate="2020-07-15T06:50:38.480" Title="Removing or disabling the wingpanel in 5.1 Hera without breaking the system" Tags="|release-hera|wingpanel|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25194" PostTypeId="2" ParentId="25182" CreationDate="2020-07-12T09:28:58.313" Score="1" Body="&lt;p&gt;&lt;strong&gt;How to install Realtek firmware&lt;/strong&gt;&lt;/p&gt;&#xA;Make directory for Realtek firmware&#xA;&lt;pre&gt;&lt;code&gt;mkdir /home/username/Downloads/rtl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Enter directory for Realtek firmware&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/rtl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Download  Realtek firmware&#xA;&lt;pre&gt;&lt;code&gt;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8168fp-3.fw&#xA;wget https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/plain/rtl_nic/rtl8125a-3.fw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Copy Realtek firmware to proper firmware directory in system&#xA;&lt;pre&gt;&lt;code&gt;sudo cp rtl8168fp-3.fw /lib/firmware/rtl_nic &#xA;sudo cp rtl8125a-3.fw /lib/firmware/rtl_nic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Update initramfs:&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -c -k 5.7.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;update GRUB:&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;check kernel version after reboot:&#xA;&lt;pre&gt;&lt;code&gt;uname -mrs&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;check errors after reboot:&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -xb&#xA;sudo dmesg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T12:46:16.067" LastActivityDate="2020-07-12T12:46:16.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25195" PostTypeId="2" ParentId="25192" CreationDate="2020-07-12T09:35:16.080" Score="0" Body="&lt;p&gt;It won't run at full speed with the power cable unplugged.&#xA;Also, update the BIOS. Check can you force the clock speed in BIOS. Check do you have in Advanced tab something called Intel SpeedStep. If yes, then enable it (if it is disabled).&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T09:35:16.080" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25196" PostTypeId="1" CreationDate="2020-07-12T11:26:10.680" Score="0" ViewCount="64" Body="&lt;p&gt;I'm having issues with Firefox:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;It is a 'non curated' app, so when i try to select automatically update in the firefox setting, the toggle is greyed out and I'm told the app is managed by the system.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;This seems very un-linux like. Surely there's a method to override this non-curated stuff and allow users to take the risk and allow updates for any app? I'm going to be downloading a LOT of un-curated software.&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;The toggle to set as my preferred browser is also greyed out because of the same reason. I have tried setting it as default in the system settings, but still when I open links it opens epiphany instead.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Any advice?&lt;/p&gt;&#xA;" OwnerUserId="7281" LastActivityDate="2024-03-24T03:08:45.963" Title="Firefox issue - can't get updates (non curated apps)" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25197" PostTypeId="2" ParentId="25182" CreationDate="2020-07-12T11:54:48.310" Score="1" Body="&lt;p&gt;&lt;strong&gt;How to install Realtek Wi-Fi drivers manually&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd&#xA;mkdir /home/username/Downloads/realtek&#xA;cd /home/username/Downloads/realtek&#xA;sudo apt-get install --reinstall git dkms build-essential linux-headers-5.3.0-62&#xA;git clone https://github.com/tomaspinho/rtl8821ce&#xA;cd rtl8821ce&#xA;sudo chmod +x dkms-install.sh&#xA;sudo chmod +x dkms-remove.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type to install:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/realtek/rtl8821ce&#xA;sudo ./dkms-install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type to remove if you will have to remove it after the reboot.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /home/username/Downloads/realtek/rtl8821ce&#xA;sudo ./dkms-remove.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T12:46:39.987" LastActivityDate="2020-07-12T12:46:39.987" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25199" PostTypeId="2" ParentId="25182" CreationDate="2020-07-12T12:35:54.073" Score="1" Body="&lt;p&gt;&lt;strong&gt;How to safely remove 5.7.8 kernel&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /var/lib/initramfs-tools/&#xA;sudo rm -rf 5.7.8&#xA;cd /boot&#xA;sudo apt --purge remove linux-image-5.7.8&#xA;sudo rm -f config-5.7.8&#xA;sudo rm -f initrd.img-5.7.8&#xA;sudo rm -f System.map-5.7.8&#xA;sudo rm -f vmlinuz-5.7.8&#xA;sudo update-initramfs -u -k all&#xA;sudo update-grub&#xA;sudo systemctl reboot&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade &amp;amp;&amp;amp; sudo apt dist-upgrade &amp;amp;&amp;amp; sudo apt autoremove &amp;amp;&amp;amp; sudo apt autoclean&#xA;sudo purge-old-kernels&#xA;sudo apt --purge autoremove&#xA;sudo update-initramfs -u -k all&#xA;sudo update-grub&#xA;sudo systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T12:47:10.703" LastActivityDate="2020-07-12T12:47:10.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25200" PostTypeId="1" AcceptedAnswerId="25205" CreationDate="2020-07-12T13:02:11.667" Score="0" ViewCount="65" Body="&lt;p&gt;Sorry in advance for my poor screenshots since I can't boot up!&lt;/p&gt;&#xA;&lt;p&gt;For some reason my 2nd internal NVMe drive was inaccessible, so I messed around with it in a partition app by formatting it which didn't work, then I changed the mounting point which allowed me to access it as an admin. Still awkward, but it worked. I did the same deal with my Kindle.. had to change mounting point and needed sudo to access it.&lt;/p&gt;&#xA;&lt;p&gt;However, I seem to have broken my boot configurations in this process. I am using an encrypted drive, and after unlocking the drive it goes into Emergency Mode. The console output during this process is below.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/eouuZ.jpg&quot; alt=&quot;Console Output&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;After researching similar Ubuntu issues, I am still unable to get it working but I do know from reading that stuff that my /etc/fstab and blkid may help deduce what is wrong:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/B7Gau.jpg&quot; alt=&quot;/etc/fstab and blkid&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;I did also eventually make two changes to my etc/fstab. If you see the comments added when the partition app changed it to use the UUIDs instead of the filepaths. I thought maybe this was the issue, and changed them back to the filepaths as they were when I installed Elementary, but the boot process is still broken.&lt;/p&gt;&#xA;&lt;p&gt;One other thing that may help... it is booting to the grub bootloader now, but it used to boot straight into Elementary...&lt;/p&gt;&#xA;&lt;p&gt;Any help or direction to get me booted up without losing files on my HD would be much appreciated. Thanks!!&lt;/p&gt;&#xA;" OwnerUserId="23450" LastActivityDate="2020-07-12T16:06:02.520" Title="Boot Issue After Formatting and Changing Mounting Points" Tags="|boot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25201" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T13:42:14.377" Score="0" Body="&lt;p&gt;Access the terminal with Ctrl+Alt+F1 and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall elementary-desktop&#xA;sudo systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T13:42:14.377" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25202" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T13:46:54.500" Score="0" Body="&lt;p&gt;After reinstalling Elementary OS desktop open terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset org.gnome.desktop.interface font-name            &#xA;&#xA;gsettings reset org.gnome.desktop.interface document-font-name &#xA;&#xA;gsettings reset org.gnome.desktop.interface monospace-font-name&#xA;&#xA;gsettings reset org.gnome.desktop.wm.preferences titlebar-font &#xA;&#xA;gsettings reset org.gnome.nautilus.desktop font &#xA;&#xA;gsettings reset org.gnome.desktop.interface text-scaling-factor &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T13:46:54.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25204" PostTypeId="1" CreationDate="2020-07-12T15:25:35.607" Score="1" ViewCount="580" Body="&lt;p&gt;1 am using Acer Swift 3 - SF314-55G. It has&#xA;Intel i5 8th Gen&#xA;2GB of NVIDIA Geforce MX250 dedicated graphics.&#xA;8 Gb RAM&#xA;512 GB SSD&lt;/p&gt;&#xA;&lt;p&gt;These are the problems I am facing with the fresh installation.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Headset microphone and laptop inbuilt microphone input is not recognized.&lt;/li&gt;&#xA;&lt;li&gt;After Installation and update following drivers installation is suggested in the app center. Do I need to install them?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/a636i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a636i.png&quot; alt=&quot;Available Drivers&quot; /&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update #2&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;These are the results&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;00:00.0 Host bridge: Intel Corporation Device 3e34 (rev 0b)&#xA;00:02.0 VGA compatible controller: Intel Corporation Device 3ea0&#xA;00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0b)&#xA;00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model&#xA;00:12.0 Signal processing controller: Intel Corporation Device 9df9 (rev 30)&#xA;00:14.0 USB controller: Intel Corporation Device 9ded (rev 30)&#xA;00:14.2 RAM memory: Intel Corporation Device 9def (rev 30)&#xA;00:14.3 Network controller: Intel Corporation Device 9df0 (rev 30)&#xA;00:15.0 Serial bus controller [0c80]: Intel Corporation Device 9de8 (rev 30)&#xA;00:15.1 Serial bus controller [0c80]: Intel Corporation Device 9de9 (rev 30)&#xA;00:16.0 Communication controller: Intel Corporation Device 9de0 (rev 30)&#xA;00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 30)&#xA;00:1c.0 PCI bridge: Intel Corporation Device 9db8 (rev f0)&#xA;00:1c.4 PCI bridge: Intel Corporation Device 9dbc (rev f0)&#xA;00:1d.0 PCI bridge: Intel Corporation Device 9db0 (rev f0)&#xA;00:1f.0 ISA bridge: Intel Corporation Device 9d84 (rev 30)&#xA;00:1f.3 Multimedia audio controller: Intel Corporation Device 9dc8 (rev 30)&#xA;00:1f.4 SMBus: Intel Corporation Device 9da3 (rev 30)&#xA;00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 9da4 (rev 30)&#xA;02:00.0 3D controller: NVIDIA Corporation Device 1d52 (rev a1)&#xA;03:00.0 Non-Volatile memory controller: Sandisk Corp Device 5003 (rev 01)&#xA;&#xA;sudo update-initramfs -u&#xA;update-initramfs: Generating /boot/initrd.img-5.3.0-62-generic&#xA;&#xA;sudo journalctl -xb&#xA;-- Logs begin at Sun 2020-07-12 18:29:30 IST, end at Sun 2020-07-12 22:20:15 IST. --&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: microcode: microcode updated early to revision 0xd6, date = 2020-04-27&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: Linux version 5.3.0-62-generic (buildd@lcy01-amd64-004) (gcc version 7.5.0 (Ubun&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-62-generic root=UUID=907427fa-236a-&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: KERNEL supported cpus:&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel:   Intel GenuineIntel&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel:   AMD AuthenticAMD&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel:   Hygon HygonGenuine&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel:   Centaur CentaurHauls&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel:   zhaoxin   Shanghai  &#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compact&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-provided physical RAM map:&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x0000000000100000-0x0000000078b46fff] usable&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x0000000078b47000-0x000000007a390fff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007a391000-0x000000007a40dfff] ACPI data&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007a40e000-0x000000007a530fff] ACPI NVS&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007a531000-0x000000007ab5efff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007ab5f000-0x000000007ac0dfff] type 20&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007ac0e000-0x000000007ac0efff] usable&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x000000007ac0f000-0x000000007fffffff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved&#xA;Jul 12 18:57:07 vishal-Swift-SF314-55G kernel: BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23403" LastEditorUserId="23403" LastEditDate="2020-07-19T12:17:45.003" LastActivityDate="2024-03-30T21:07:10.893" Title="Headset microphone and laptop inbuilt microphone input is not recognized and wierd noise with video recording in native camera app" Tags="|graphic-drivers|audio|videos|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25205" PostTypeId="2" ParentId="25200" CreationDate="2020-07-12T15:40:54.720" Score="0" Body="&lt;p&gt;To boot into single user mode you edit the boot instructions for the GRUB menu entry you wish to boot and add the kernel parameter/option single. Brief instructions for how to do this are below.&lt;/p&gt;&#xA;&lt;p&gt;Turn on laptop and wait when GRUB menu will appear. Select (highlight) the GRUB boot menu entry you wish to use. Use the first one entry in this case.&lt;/p&gt;&#xA;&lt;p&gt;Press e to edit the GRUB boot commands for the selected boot menu entry.&lt;/p&gt;&#xA;&lt;p&gt;Look near the bottom of the list of commands for lines similar to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;linux /boot/vmlinuz-5.7.0 root=UUID=bc6f8146-1523-46a6-8b&#xA;6a-64b819ccf2b7 ro quiet splash initrd /boot/initrd.img-5.7.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change the line by removing quiet splash and by adding the kernel boot parameter single to the end of the line (it should look exactly like this: ro single).&lt;/p&gt;&#xA;&lt;p&gt;For this example you would change:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;6a-64b819ccf2b7 ro quiet splash&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;6a-64b819ccf2b7 ro single&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press either Ctrl+X or F10 to boot using these kernel options.&lt;/p&gt;&#xA;&lt;p&gt;Note: These changes are not persistent. Any change to the kernel boot options made this way will only affect the next boot and only if you start that boot by pressing either Ctrl+X or F10 while still in GRUB edit mode.&lt;/p&gt;&#xA;&lt;p&gt;Then run the system and see errors on the screen and provide a photo of the screen with errors or information the system shows.&lt;/p&gt;&#xA;&lt;p&gt;Then you should hit Enter to go into maintenance mode and type in terminal.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;journalctl -xb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and hit Enter.&lt;/p&gt;&#xA;&lt;p&gt;It will show you all information from the boot start process to the end, I mean to the moment you hit Enter to go into maintenance mode. To quit viewing hit q.&lt;/p&gt;&#xA;&lt;p&gt;Provide screenshots. Use arrows or PgUp PgDown to scroll text in the screen.&lt;/p&gt;&#xA;&lt;p&gt;Then very important step is to show the fstab.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cat /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Example: how fstab should look like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;UUID=89ef95ac-3c86-4b94-a37c-da8c72a148fa /               ext4    errors=remount-ro 0       1&#xA;# /boot was on /dev/sda6 during installation&#xA;UUID=8b4947b6-c0c9-4b1f-87ed-ef698609be22 /boot           ext4    defaults        0       2&#xA;# /boot/efi was on /dev/sda2 during installation&#xA;UUID=C8CA-DC0F  /boot/efi       vfat    umask=0077      0       1&#xA;# /home was on /dev/sda7 during installation&#xA;UUID=21f30bb7-2c7a-405f-bb16-b37901eeda09 /home           ext4    defaults        0       2&#xA;# swap was on /dev/sda5 during installation&#xA;UUID=c98dd990-02e1-4872-9de0-d00601e5aa7a none            swap    sw              0       0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Edit the /etc/default/grub&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and change:&lt;/p&gt;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;to this:&lt;/p&gt;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX=&amp;quot;mount.timeout=300s&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;ctrl+o saves, ctrl+x exits&lt;/p&gt;&#xA;&lt;p&gt;Type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo grub2-mkconfig -o /boot/grub2/grub.cfg and restart.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To restart type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And hit Enter.&lt;/p&gt;&#xA;&lt;p&gt;Then you can repeat all steps but instead of hitting Enter, hit Ctrl+d to run the system.&lt;/p&gt;&#xA;&lt;p&gt;See will it load with default options.&lt;/p&gt;&#xA;&lt;p&gt;The same effect you will achieve when you will hit Enter instead Ctrl+d and then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemctl default &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and hit Enter.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T15:40:54.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25206" PostTypeId="2" ParentId="25200" CreationDate="2020-07-12T15:59:32.653" Score="0" Body="&lt;p&gt;There is a mount trick with fstab.&lt;/p&gt;&#xA;&lt;p&gt;You can try to use command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mount -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mount &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to see  what is mounted.&lt;/p&gt;&#xA;&lt;p&gt;And if you will display what is in mtab with this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cat /etc/mtab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You will see mounted disks.&#xA;You can copy those which should be mounted during the boot process and paste them into /etc/fstab.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T16:06:02.520" LastActivityDate="2020-07-12T16:06:02.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25209" PostTypeId="1" CreationDate="2020-07-12T18:01:23.080" Score="0" ViewCount="73" Body="&lt;p&gt;&lt;strong&gt;Problem 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;When closing Spotify, the music stops, but the windows doesn't quit. Clicking repeatedly gives me a &amp;quot;Force Quit&amp;quot; option, as Spotify has stopped responding.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Problem 2:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;When listening to music via Spotify, (installed via snapstore; Premium Account) I can see and control the current song via the media control on the wingpanel.&lt;/p&gt;&#xA;&lt;p&gt;However, I'm missing any kind of album art. I only ever get the default &amp;quot;music&amp;quot; icon.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gTEmq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gTEmq.png&quot; alt=&quot;Music Control&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I've seen in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21626/no-artwork-shown-for-media-played-through-chromium&quot;&gt;this post&lt;/a&gt; that the OP could see their album art from Spotify,&#xA;so I assume it must be something about my configuration.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Info&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Spotify is installed via the snap store, I have a Premium Account, I'm on Elementary OS 5.1.6 Hera.&lt;/p&gt;&#xA;&lt;p&gt;I can't recall ever not having the aforementioned problems, but just to be sure, all I remember to have changed regarding Spotify:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I disabled the notification that occurs after every song in Spotify's settings&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;: With a little patience, it seems, Spotify does close normally, although very slowly in my opinion. However, &lt;strong&gt;Problem 2&lt;/strong&gt; persists&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update 2&lt;/strong&gt;: While Spotify's still usable, I've taken the problem as a motivation to install mopidy with a spotify backend and iris frontend instead, which was admittedly a totally overblown solution.&#xA;I'd still prefer Spotify to work completely, as I'm stubborn like that, but oh well.&lt;/p&gt;&#xA;" OwnerUserId="23452" LastEditorUserId="23452" LastEditDate="2020-07-17T14:03:26.933" LastActivityDate="2024-03-28T21:07:00.767" Title="Spotify does not quit properly and Album Art for Spotify Songs in Media Control missing" Tags="|release-hera|spotify|multimedia|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25210" PostTypeId="2" ParentId="25196" CreationDate="2020-07-12T18:16:32.583" Score="0" Body="&lt;p&gt;Usually stuff only get security updates and sometimes bugsfixing from the repositories, depending if it's system, libs or apps. Apps don't get new versions, then you are looking for a rolling release distro.&lt;/p&gt;&#xA;&lt;p&gt;However elementary OS can use Flathub to get new version of apss/software, check it out: &lt;a href=&quot;https://flathub.org/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/home&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-07-12T18:16:32.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25211" PostTypeId="2" ParentId="25204" CreationDate="2020-07-12T18:17:08.940" Score="0" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install pavucontrol&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To restart machine type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If after restart there will be no sound, type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/modprobe.d/alsa-base.conf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;add&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;snd-hda-intel model=clevo-p950&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to the end of this file, save with Ctrl+o and exit with Ctrl+x.&lt;/p&gt;&#xA;&lt;p&gt;Restart machine.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T20:56:35.810" LastActivityDate="2020-07-12T20:56:35.810" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25212" PostTypeId="2" ParentId="25193" CreationDate="2020-07-12T18:49:30.420" Score="2" Body="&lt;p&gt;So I ended up devising my own hacky solution to get rid of it. I made a bash file titled &lt;code&gt;/usr/bin/nowingpanel&lt;/code&gt; and in it, I put this...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;while true; do&#xA;    sleep 1&#xA;    killall wingpanel&#xA;done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I made it an executable and put it in the startup applications and now wingpanel is no more.&lt;/p&gt;&#xA;" OwnerUserId="23448" LastActivityDate="2020-07-12T18:49:30.420" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25213" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T18:55:29.697" Score="0" Body="&lt;p&gt;You can check this by type the command in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo tail /var/log/dpkg.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and provide the results here.&lt;/p&gt;&#xA;&lt;p&gt;Also command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo journalctl -xb &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Will contain information.&lt;/p&gt;&#xA;&lt;p&gt;Additionally you can check what you have installed by typing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo tail -n 50 /var/log/apt/history.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also worth to check this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo tail /var/log/fontconfig.log&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T18:55:29.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25214" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T19:06:49.020" Score="0" Body="&lt;p&gt;Check this thread: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/13499/elementary-os-system-fonts-haywire&quot;&gt;ttps://elementaryos.stackexchange.com/questions/13499/elementary-os-system-fonts-haywire&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Click the Application on the wingpanel (top left), type screenshot , run it, and switch the switcher Conceal text to disable it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/F4b8k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F4b8k.png&quot; alt=&quot;Screenshot app&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T19:06:49.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25215" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T19:15:11.830" Score="0" Body="&lt;p&gt;You can try also to rebuild font cache by typing in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo fc-cache -f -v&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T19:15:11.830" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25216" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T19:17:58.697" Score="0" Body="&lt;p&gt;You can also create additionally a new user in the system and check do fonts displaying correctly or not by logging to the new user account.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-12T19:17:58.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25217" PostTypeId="2" ParentId="25190" CreationDate="2020-07-12T19:22:34.560" Score="0" Body="&lt;p&gt;One more solution is to install BleachBit and run it as standard user not as a root.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1144/how-can-i-clean-the-system-from-unnecessary-files&quot;&gt;How can I clean the system from unnecessary files?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Select options I highlighted on the screenshot.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hu2gh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hu2gh.png&quot; alt=&quot;BleachBit user settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After that run BleachBit as root from Applications. If it will not run, open terminal and type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo bleachbit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And select as below on the image.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aSYWM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aSYWM.png&quot; alt=&quot;BleachBit as root&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-12T19:32:56.197" LastActivityDate="2020-07-12T19:32:56.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25219" PostTypeId="2" ParentId="25163" CreationDate="2020-07-12T21:41:01.350" Score="0" Body="&lt;p&gt;i solved this (workaround i guess) by following &lt;a href=&quot;https://comandandodebian.wordpress.com/2018/03/29/arreflar-problema-add-apt-repository-ppa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;It worked for me on elementaryOs Hera&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;wget &lt;a href=&quot;http://blog.anantshri.info/content/uploads/2010/09/add-apt-repository.sh.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://blog.anantshri.info/content/uploads/2010/09/add-apt-repository.sh.txt&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Edit script: change lucid to bionic (line 14)&lt;/li&gt;&#xA;&lt;li&gt;sudo cp add-apt-repository.sh.txt /usr/sbin/add-apt-repository&lt;/li&gt;&#xA;&lt;li&gt;sudo chmod o+x /usr/sbin/add-apt-repository&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;done!&lt;/p&gt;&#xA;" OwnerUserId="23454" LastEditorUserId="23454" LastEditDate="2020-07-12T22:17:59.420" LastActivityDate="2020-07-12T22:17:59.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25220" PostTypeId="1" AcceptedAnswerId="25278" CreationDate="2020-07-13T03:16:29.943" Score="1" ViewCount="789" Body="&lt;h2&gt;&lt;a href=&quot;https://i.stack.imgur.com/HAsHV.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HAsHV.jpg&quot; alt=&quot; &quot; /&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0nLHD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0nLHD.png&quot; alt=&quot;nerty&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I just installed Hera.&lt;/strong&gt;&#xA;As you can see, there is no wifi in settings.&#xA;as you can also see, the wifi icon seems to have been replaced by the &amp;quot;wired&amp;quot; symbol on the top bar. I cant turn on any of the options on that symbol&lt;/p&gt;&#xA;&lt;p&gt;Please note that &lt;strong&gt;i have no access to the internet at all&lt;/strong&gt; on the laptop.&#xA;&lt;em&gt;i do, however, have a pc that is connected to wifi.&lt;/em&gt; (the one im posting on)&#xA;&lt;em&gt;i also have a usb flash drive.&lt;/em&gt; (the one i used to transfer the screenshot files.)&lt;/p&gt;&#xA;&lt;p&gt;OK, ive found the specs:&lt;/p&gt;&#xA;&lt;p&gt;HP 14-DK0002DX&lt;/p&gt;&#xA;&lt;p&gt;14″ Laptop (AMD A9 with Radeon R5, 4GB RAM, 128GB SSD)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FYafi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FYafi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have wifi now via usb tethering on my phone!&lt;/p&gt;&#xA;" OwnerUserId="23457" LastEditorUserId="23457" LastEditDate="2020-07-13T19:59:23.177" LastActivityDate="2020-07-31T11:28:09.997" Title="Wireless internet missing. No icon or settings" Tags="|release-hera|settings|wifi|wingpanel|internet|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25222" PostTypeId="2" ParentId="25204" CreationDate="2020-07-13T05:21:29.927" Score="0" Body="&lt;p&gt;I found some links dealing with similar issue&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1082994/acer-swift-3-microphone-not-working-with-ubuntu-18-04&quot;&gt;https://askubuntu.com/questions/1082994/acer-swift-3-microphone-not-working-with-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/ManjaroLinux/comments/fv85p5/inbuilt_mic_and_headphone_jack_mic_not_working_on/?utm_medium=android_app&amp;amp;utm_source=share&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/ManjaroLinux/comments/fv85p5/inbuilt_mic_and_headphone_jack_mic_not_working_on/?utm_medium=android_app&amp;amp;utm_source=share&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Internal microphone not working on Acer swift3 alc256 - Technical Issues and Assistance / Drivers - Manjaro Linux Forum&#xA;&lt;a href=&quot;https://forum.manjaro.org/t/internal-microphone-not-working-on-acer-swift3-alc256/137484&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.manjaro.org/t/internal-microphone-not-working-on-acer-swift3-alc256/137484&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23403" LastActivityDate="2020-07-13T05:21:29.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25223" PostTypeId="1" AcceptedAnswerId="25252" CreationDate="2020-07-13T10:10:50.937" Score="0" ViewCount="93" Body="&lt;p&gt;Does anyone know how to make the following command permanent in Elementary OS?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;route add -host 192.168.1.1 dev wlp0s20f3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This route does exactly what I need, but its not permanent. A reboot of the machine or the network connection will result in it being removed from the IP tables.&lt;/p&gt;&#xA;&lt;p&gt;I can't seem to find the files that define the routes for this device (wifi adapter - wlp0s20f3).&lt;/p&gt;&#xA;" OwnerUserId="20363" LastEditorUserId="20363" LastEditDate="2020-07-17T07:34:45.630" LastActivityDate="2020-07-17T07:34:45.630" Title="Permanent Static Route to Device" Tags="|networking|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25225" PostTypeId="2" ParentId="25158" CreationDate="2020-07-13T14:25:59.673" Score="0" Body="&lt;p&gt;I finally got it working. I'll put it here in case someone faces the same issue.&lt;/p&gt;&#xA;&lt;p&gt;First, I followed  @Sysadmin  &lt;a href=&quot;https://unix.stackexchange.com/a/141180/334880&quot;&gt;suggestion&lt;/a&gt; mentioned in the comments above.&lt;/p&gt;&#xA;&lt;p&gt;Then,&lt;/p&gt;&#xA;&lt;p&gt;Run the following two commands in the terminal before trying to change colors or theme. (you can add this to your .bashrc or profile so that you don't have to do it everytime your system reboots).&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;export TERMINAL='io.elementary.terminal'&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;export GIO_EXTRA_MODULES=/usr/lib/x86_64-linux-gnu/gio/modules/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;After this, you can run gsettings commands with no problem.&lt;/p&gt;&#xA;&lt;p&gt;Also, this doesn't require a reboot and changes are reflected immediatly (pretty neat).&lt;/p&gt;&#xA;&lt;p&gt;Check this awsome &lt;a href=&quot;https://mayccoll.github.io/Gogh/&quot; rel=&quot;nofollow noreferrer&quot;&gt;tool&lt;/a&gt; for switching themes easily.&lt;/p&gt;&#xA;&lt;p&gt;source: &lt;a href=&quot;https://github.com/Mayccoll/Gogh/issues/175#issuecomment-534018420&quot; rel=&quot;nofollow noreferrer&quot;&gt;credits to drjmcauliffe&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22175" LastActivityDate="2020-07-13T14:25:59.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25226" PostTypeId="1" CreationDate="2020-07-13T15:34:18.117" Score="0" ViewCount="253" Body="&lt;p&gt;I am using the Hera 5.1 I tried to restart network manager and there was a pop up but when I open Network Settings there was only vpn and proxy???&lt;/p&gt;&#xA;" OwnerUserId="23460" LastEditorUserId="15904" LastEditDate="2020-07-15T06:50:35.110" LastActivityDate="2023-12-09T09:01:35.167" Title="No Wireless Connection On Elementary OS On Hera 5.1" Tags="|release-hera|wifi|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25228" PostTypeId="2" ParentId="18700" CreationDate="2020-07-13T19:53:49.563" Score="0" Body="&lt;p&gt;no need for OpenSSH-server - ssh-import-id pulls it as a dependency.&lt;/p&gt;&#xA;" OwnerUserId="23356" LastActivityDate="2020-07-13T19:53:49.563" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25229" PostTypeId="2" ParentId="25220" CreationDate="2020-07-13T19:55:43.950" Score="-1" Body="&lt;p&gt;Checking the issue with these two commands to find out what Wi-Fi adapter you are using and do you have any information about missing firmware.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Getting Internet&lt;/p&gt;&#xA;&lt;p&gt;We need a temporary internet connection to fix WiFi. Ways to connect :&lt;/p&gt;&#xA;&lt;p&gt;Connect USB cable and use USB Tethering in your phone to connect your computer to the internet (through phone's cellular data/WiFi)Use wired ethernet cable for connecting to internet.&lt;/p&gt;&#xA;&lt;p&gt;Prerequisite&lt;/p&gt;&#xA;&lt;p&gt;You should install the corresponding header of your kernel. Open terminal and type:&lt;/p&gt;&#xA;&lt;p&gt;This as first:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-`uname -r` &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, install the packages necessary for building :&lt;/p&gt;&#xA;&lt;p&gt;This as second:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git build-essential dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type in terminal as third:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then type this as fourth command in order, everything in one line.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;git clone -b extended --single-branch https://github.com/lwfinger/rtlwifi_new.git &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type this as fifth command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dkms add rtlwifi_new &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Type this as sixth command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dkms install rtlwifi-new/0.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Restart laptop.&lt;/p&gt;&#xA;&lt;p&gt;If you will have issue with typing commands one by one, use this one-liner:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-`uname -r` &amp;amp;&amp;amp; sudo apt-get install git build-essential dkms &amp;amp;&amp;amp; cd  &amp;amp;&amp;amp; git clone -b extended --single-branch https://github.com/lwfinger/rtlwifi_new.git &amp;amp;&amp;amp; sudo dkms add rtlwifi_new  &amp;amp;&amp;amp; sudo dkms install rtlwifi-new/0.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then restart laptop.&lt;/p&gt;&#xA;&lt;p&gt;Other methods described here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://subinsb.com/install-realtek-d723-wifi-driver-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://subinsb.com/install-realtek-d723-wifi-driver-linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-07-15T15:45:05.640" LastActivityDate="2020-07-15T15:45:05.640" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25230" PostTypeId="2" ParentId="14622" CreationDate="2020-07-13T21:21:16.410" Score="0" Body="&lt;p&gt;This might also be a language issue: I could not delete mails until I changed the configuration in geary.ini fom&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;trash_folder=Trash;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;trash_folder=Papierkorb;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;as I'm using a German Gmail account. After that a delete was possible...&lt;/p&gt;&#xA;" OwnerUserId="23462" LastActivityDate="2020-07-13T21:21:16.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25231" PostTypeId="2" ParentId="25191" CreationDate="2020-07-14T03:03:18.570" Score="0" Body="&lt;p&gt;I had asked this question as I was exploring making a switch from Windows 10 to elementary OS as my primary desktop (dual boot).  I have been installing lots of ppas, and just to make sure it wasn't related to one of these,&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I did a clean install,  with all the software I previously installed except for the firejail ppa + firejail, and things have been working without any issue so far&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Here's why I'm very suspicious that a botched firejail install (blame me for being a newbie) caused the problem:&lt;/p&gt;&#xA;&lt;p&gt;I had noticed that running &lt;code&gt;groups&lt;/code&gt; from a terminal after login would show me only my primary group.  Running groups from the console (ctrl-alt-f1) would show me all the groups I belonged to (including docker.. guess how I realized I wasn't in the docker group :) ).  I could also su as my own user from within the terminal, and groups would behave normally.&lt;/p&gt;&#xA;&lt;p&gt;I suspected firejail at this point, though I had run firecfg --clean prior to removing it (I had problems with dropbox that I wasn't able to solve quickly, and I read some risks about firejail running suid).  However, that was the only explanation I could think of for the weird groups behavior.&lt;/p&gt;&#xA;&lt;p&gt;As uninstalling/cleaning didn't seem to help, I re-installed the relatively new install and just skipped firejail, and things are working great!&lt;/p&gt;&#xA;" OwnerUserId="23446" LastActivityDate="2020-07-14T03:03:18.570" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25232" PostTypeId="1" CreationDate="2020-07-14T08:58:59.913" Score="0" ViewCount="72" Body="&lt;p&gt;I'm a noob and apologies if this a v basic question. I'm trying to install this on my new Thinkpad X1 C7, but when trying latest version on live, everything seems to be working okay except wifi is not detected. Anyone else tried installing this on a similar machine and it worked out of the box? Or have advice on how to resolve wifi issue? Also, wondering if you did install this on a Thinkpad X1C7, did you do any tweaks to make the audio sound as awesome, and also on heating and battery optimisation?&lt;/p&gt;&#xA;&lt;p&gt;Thanks much!&lt;/p&gt;&#xA;" OwnerUserId="23464" LastActivityDate="2020-07-15T09:32:34.683" Title="Installing elementary OS on Thinkpad X1C7 - has anyone done this? &amp; did you have wifi problems?" Tags="|system-installation|wifi|networking|thinkpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25233" PostTypeId="2" ParentId="24874" CreationDate="2020-07-14T11:56:14.503" Score="2" Body="&lt;ol&gt;&#xA;&lt;li&gt;Open terminal&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo vi  /usr/share/dbus-1/interfaces/io.elementary.pantheon.AccountsService.xml&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Replace the whole code with &lt;a href=&quot;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/default-settings/blob/master/accountsservice/io.elementary.pantheon.AccountsService.xml&lt;/a&gt;, &lt;code&gt;:put+&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Change the &lt;em&gt;PrefersColorScheme&lt;/em&gt; value from 0 to &lt;strong&gt;1&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Save the changes, &lt;code&gt;:wq&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Restart the system, don't just &lt;code&gt;sudo service lightdm restart&lt;/code&gt; because it won't work.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Tested on eOS 5.1.6.&lt;/p&gt;&#xA;" OwnerUserId="3479" LastActivityDate="2020-07-14T11:56:14.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25234" PostTypeId="1" CreationDate="2020-07-14T14:51:31.797" Score="1" ViewCount="86" Body="&lt;p&gt;I'm a begineer user of a Elementary OS; can anybody help me to indicate how can I have a good resolution of display?  After instalation of Elementary OS is diponible only 4:3. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="23465" LastActivityDate="2020-07-14T17:36:31.370" Title="Display resolution" Tags="|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25235" PostTypeId="1" CreationDate="2020-07-14T16:25:05.930" Score="1" ViewCount="221" Body="&lt;p&gt;Tried to give some new life to my old Macbook White Mid 2010 with Elementary:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1st First install&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;rEFInd is installed&lt;/li&gt;&#xA;&lt;li&gt;Elementary Live version runs fine&lt;/li&gt;&#xA;&lt;li&gt;Once installed and system updated (apart from video driver), Elementary will eventually, (after around 10-15 mins, freezes the UI, but still move the cursor. Some time it unfreezes itself, throwing me to the login screen again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I researched and found that it could be related to video drivers. Ended up installing something related to &lt;code&gt;ppa&lt;/code&gt; on the Terminal. Not sure. I am not this kind of user. It didn't work and I ended with a black screen after the Elementary &amp;quot;E&amp;quot; symbol is gone after boot.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;2nd Install&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;So I did a fresh install. Updated everything, got a freeze again. Later with the laptop on, it unfroze, and the the updater shown a nvidia-340 driver. I installed on it. As well as another kernel-something driver.&lt;/p&gt;&#xA;&lt;p&gt;Now I got a black screen again and I have no idea on what to do. Can't boot press &lt;code&gt;CTRL+Alt+F1&lt;/code&gt; to access the command line.&lt;/p&gt;&#xA;&lt;p&gt;I read about something of &lt;code&gt;nomodeset&lt;/code&gt; on GRUB, but I don't know how to access it. Pressing repeatedly the &lt;code&gt;E&lt;/code&gt; key on keyboard before Elemtary logo shows up won't do nothing.&lt;/p&gt;&#xA;&lt;p&gt;Stack Exchange suggested &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16402/macbook-2010-not-booting-after-update-black-screen&quot;&gt;this&lt;/a&gt; as I wrote the title, but I can't access the tty, as nothing is displayed after the &amp;quot;E&amp;quot; logo disappears.&lt;/p&gt;&#xA;" OwnerUserId="23467" LastActivityDate="2024-01-20T01:03:55.430" Title="Black Screen After Boot – On a Macbook White 2010 / GeForce 320M After Updated to Nvidia 340 Drivers — Running Hera" Tags="|macbook|black-screen|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25236" PostTypeId="2" ParentId="15193" CreationDate="2020-07-14T17:33:08.130" Score="0" Body="&lt;p&gt;if you run &lt;code&gt;light-locker&lt;/code&gt; at one terminal lock will work ...&lt;br /&gt;&#xA;but running &lt;code&gt;light-locker-settings&lt;/code&gt; give me this error , still investigating&#xA;light-locker-settings&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;(light-locker-settings.py:10794): Gtk-WARNING **: 18:06:34.602: Locale not supported by C library.&#xA;        Using the fallback 'C' locale.&#xA;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py:29: PyGIWarning: Gtk was imported without specifying a version first. Use gi.require_version('Gtk', '3.0') before import to ensure that the right version gets loaded.&#xA;  from gi.repository import Gtk, GLib, Gio&#xA;Traceback (most recent call last):&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 702, in &amp;lt;module&amp;gt;&#xA;    main = LightLockerSettings()&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 98, in __init__&#xA;    self.init_settings()&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 440, in init_settings&#xA;    settings = self.gsettings_get_settings()&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 276, in gsettings_get_settings&#xA;    settings['light-locker-enabled'] = self.get_light_locker_enabled()&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 499, in get_light_locker_enabled&#xA;    keyfile = self.get_light_locker_autostart()&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 384, in get_light_locker_autostart&#xA;    self.get_autostart('light-locker.desktop', defaults)&#xA;  File &amp;quot;/usr/share/light-locker-settings/light-locker-settings/light-locker-settings.py&amp;quot;, line 358, in get_autostart&#xA;    GLib.KeyFileFlags.KEEP_TRANSLATIONS)&#xA;GLib.Error: g-key-file-error-quark: Valid key file could not be found in search dirs (2)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23468" LastActivityDate="2020-07-14T17:33:08.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25237" PostTypeId="2" ParentId="25234" CreationDate="2020-07-14T17:36:31.370" Score="1" Body="&lt;p&gt;1 - Open System Settings &amp;gt; Displays and change the resolution manually. If you see a &amp;quot;fake&amp;quot; secondary screen disable it as well.&lt;/p&gt;&#xA;&lt;p&gt;2 - Open AppCenter and go to the Updates tab. Wait for it to load, and install the  graphics drivers for your system.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-07-14T17:36:31.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25238" PostTypeId="2" ParentId="24874" CreationDate="2020-07-14T19:44:26.340" Score="0" Body="&lt;p&gt;I would like to add to MA Jacob's solution that, if you follow his solution but still don't see a dark mode in things like:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The system settings&lt;/li&gt;&#xA;&lt;li&gt;The Applications Menu and other wingpanel indicators&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;It &lt;em&gt;might&lt;/em&gt; be because you changed your Plank Theme.&lt;/p&gt;&#xA;&lt;p&gt;I did this, since I wanted a transparent dock (Ctrl + Click on Dock, Preferences, Theme) and the aforementioned stayed in light mode.&lt;/p&gt;&#xA;&lt;p&gt;Changing it back to &amp;quot;Default&amp;quot; solved it for me.&#xA;I still got my transparent dock by copying /usr/share/plank/themes/Transparent/dock.theme to /usr/share/plank/themes/Default/dock.theme (backup the Default/dock.theme first)&#xA;and leaving the setting on Default to keep dark mode.&lt;/p&gt;&#xA;" OwnerUserId="23452" LastActivityDate="2020-07-14T19:44:26.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25239" PostTypeId="2" ParentId="25141" CreationDate="2020-07-14T20:12:41.733" Score="-1" Body="&lt;p&gt;Thanks for the walkthrough! Here's code 1 and 2 as follows:&lt;/p&gt;&#xA;&lt;p&gt;Code 1&#xA;&lt;a href=&quot;https://i.stack.imgur.com/tf0mi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tf0mi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Code 2&#xA;&lt;a href=&quot;https://i.stack.imgur.com/APqOb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/APqOb.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23397" LastActivityDate="2020-07-14T20:12:41.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25241" PostTypeId="2" ParentId="25141" CreationDate="2020-07-15T00:10:42.577" Score="1" Body="&lt;p&gt;Nice job with the screen shots. After the next bits of info you should be able to go back into System Settings/Displays and select your monitors aspect ratio. It will not survive a restart however and we will try and fix that after this part succeeds. So here we go. First you will apply 2 codes in the terminal.&#xA;Code 1:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo xrandr --newmode &amp;quot;2560x1440_60.00&amp;quot;  173.00  1920 2048 2248 2576  1080 1088 1120 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Code 2:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo xrandr --addmode Virtual1 &amp;quot;2560x1440_60.00&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now you are ready to leave the terminal and go back to the elementaryOS desktop and select in applications, System Settings and then Displays. Click on the gear icon in Displays and scroll to the newly added aspect ratio for your monitor (2560x1440). It may be someplace other than where you expect in the drop down menu so make sure you scroll all the way up and down through the menu. Select the monitor you want and then hit apply (may take two attempts to click the apply button) then you will be asked if you want to keep the neww or return to the previous. Keep the new and you should now have the aspect ratio you wanted.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Epxn1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Epxn1.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You may need to go into the Virtualbox 'View&amp;quot; menu and select &amp;quot;Full Screen Mode&amp;quot; or &amp;quot;Scaled Mode&amp;quot; to view the entire screen in proper aspect. Let me know how this goes. If it works we will attempt to make it permanent so it survives a restart. Good Luck!&lt;/p&gt;&#xA;" OwnerUserId="23378" LastEditorUserId="23378" LastEditDate="2020-07-15T00:16:29.003" LastActivityDate="2020-07-15T00:16:29.003" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25242" PostTypeId="1" AcceptedAnswerId="25266" CreationDate="2020-07-15T04:55:04.960" Score="2" ViewCount="165" Body="&lt;p&gt;Can I add multiple docks?&lt;/p&gt;&#xA;&lt;p&gt;I managed to once, by pressing the &lt;code&gt;fn&lt;/code&gt; key and something else (sadly, I cannot remember.)&#xA;One dock was purple and the other was white. the purple was on the right and the white was on the left.&lt;/p&gt;&#xA;&lt;p&gt;(it may have been &lt;code&gt;fn&lt;/code&gt; + &lt;code&gt;right click&lt;/code&gt; on the dock.)(also, it may not have been the &lt;code&gt;fn&lt;/code&gt; key, but &lt;code&gt;command&lt;/code&gt; or &lt;code&gt;alt&lt;/code&gt;)&lt;/p&gt;&#xA;&lt;p&gt;I'm not looking to mimic that, but any method that allows me to have multiple docks with separate apps on them.&lt;/p&gt;&#xA;" OwnerUserId="23472" LastEditorUserId="23472" LastEditDate="2020-07-15T05:12:30.167" LastActivityDate="2020-07-18T21:48:59.637" Title="Can i add multiple docks?" Tags="|settings|plank|apps|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25243" PostTypeId="1" CreationDate="2020-07-15T07:30:32.513" Score="1" ViewCount="54" Body="&lt;p&gt;Having used Loki for several years I have just updated to Hera. All my hardware is the same. Just a complete software upgrade. Works well except Hera recognises my Samsung 40” tv as a Samsung 7”. The resolution seems fine but it’s rather odd considering Loki detected the TV first time. The detect display button does not work nor can I mirror the display. Any suggestions please.&#xA;As to specifications the TV is full HD (not smart) and the resolution shown on the display panel in Hera is acceptable. The connection to the Linux mini itx box is HDMI. The cpu is an intel quad core processor J3160 itx. 8gb of system memory. The graphics card is another intel HD graphics 400 12 EU,s inside up to 700MHz. It supports HDMI with 4K x 2k or 2560 x 1600 at 60Hz.&lt;/p&gt;&#xA;" OwnerUserId="23473" LastEditorUserId="23473" LastEditDate="2020-07-15T11:43:57.377" LastActivityDate="2020-07-15T11:43:57.377" Title="Monitor type wrongly detected in Hera" Tags="|release-hera|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25244" PostTypeId="2" ParentId="25232" CreationDate="2020-07-15T09:32:34.683" Score="1" Body="&lt;p&gt;Try to share internet connection from phone via usb and still wait notification from AppCenter. I have some problem on my PC and when i connected in internet i got notification about driver for wi-fi device.&lt;br /&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/RxXGN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RxXGN.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23475" LastActivityDate="2020-07-15T09:32:34.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25246" PostTypeId="2" ParentId="25226" CreationDate="2020-07-15T09:53:29.940" Score="0" Body="&lt;p&gt;Please open terminal and enter command &amp;quot;lspci&amp;quot; and show result. If you need quality help you add information about your PC&lt;/p&gt;&#xA;" OwnerUserId="23475" LastActivityDate="2020-07-15T09:53:29.940" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25247" PostTypeId="1" CreationDate="2020-07-16T10:16:30.720" Score="0" ViewCount="48" Body="&lt;p&gt;After the some updates were installed, the top and bottom bar didn't appear. I decided to shutdown the computer to see if it was solved and then I get that error. I could manage to access the terminal but there's no internet connection and the visual interfaces don't load.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vkmpG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vkmpG.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23482" LastActivityDate="2024-03-27T21:07:30.840" Title="Error loading the system" Tags="|dual-boot|plymouth|error|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25249" PostTypeId="2" ParentId="25247" CreationDate="2020-07-16T14:23:57.370" Score="0" Body="&lt;p&gt;Type in terminal to remove qemu-kvm:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge qemu-system-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type to restart:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you do not want to remove qemu-kvm then type :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl stop qemu-kvm &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl disable qemu-kvm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then type :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl mask qemu-kvm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Check status of qemu-kvm:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl status qemu-kvm &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To restart:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl reboot &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-16T14:23:57.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25250" PostTypeId="2" ParentId="25209" CreationDate="2020-07-16T14:33:07.653" Score="0" Body="&lt;p&gt;Remove Spotify installed from flathub.&lt;/p&gt;&#xA;&lt;p&gt;Link: &lt;a href=&quot;https://neverware.zendesk.com/hc/en-us/community/posts/360001125187-How-do-you-uninstall-Flatpacks-&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://neverware.zendesk.com/hc/en-us/community/posts/360001125187-How-do-you-uninstall-Flatpacks-&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Remove Spotify installed old way via terminal.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge spotify&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install Spotify via terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install spotify&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-16T14:33:07.653" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25252" PostTypeId="2" ParentId="25223" CreationDate="2020-07-16T18:24:24.413" Score="1" Body="&lt;p&gt;Type in terminal :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/network/interfaces&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Add at the bottom this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;up route add -net 192.168.1.10/24 gw 192.168.1.1 dev wlp0s20f3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Where 192.168.1.10 is the IP of your machine which you can check with command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ip a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Restart the networking service by typing in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo /etc/init.d/networking restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-16T18:24:24.413" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25253" PostTypeId="2" ParentId="19300" CreationDate="2020-07-16T22:47:27.590" Score="-2" Body="&lt;p&gt;Better yet, just delete Code (io.elementary.code) and install gedit; much better text editor for general use. Having to always type crtl + backslash is a waste of time and a waste of screen real estate...&lt;/p&gt;&#xA;" OwnerUserId="23485" LastActivityDate="2020-07-16T22:47:27.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25254" PostTypeId="2" ParentId="24758" CreationDate="2020-07-17T07:33:24.750" Score="0" Body="&lt;p&gt;Go to system settings -&amp;gt; Keyboards -&amp;gt; click the + icon at the lower-left corner and select Indian. Then you can see all the Indian language keyboard layouts listed. I think this what you are looking for.&lt;/p&gt;&#xA;" OwnerUserId="23486" LastActivityDate="2020-07-17T07:33:24.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25255" PostTypeId="2" ParentId="246" CreationDate="2020-07-17T12:47:59.027" Score="0" Body="&lt;p&gt;yes this is possible&#xA;and for a full discription check this video:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=xNIWq4hgw78&amp;amp;t=14s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=xNIWq4hgw78&amp;amp;t=14s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23487" LastActivityDate="2020-07-17T12:47:59.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25256" PostTypeId="2" ParentId="876" CreationDate="2020-07-17T12:59:09.220" Score="0" Body="&lt;p&gt;for an easy way and for a full discription to how create multiple docks in plank check this video:&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=xNIWq4hgw78&amp;amp;t=14s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=xNIWq4hgw78&amp;amp;t=14s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23487" LastActivityDate="2020-07-17T12:59:09.220" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25257" PostTypeId="2" ParentId="18901" CreationDate="2020-07-17T15:07:41.237" Score="0" Body="&lt;p&gt;As far as I know, UEFI installation needs a partition that contains some configuration files for your BIOS. It should warn you when installing the OS. I don't know what the flag is but it has something saying uefi_boot. Something like that.&lt;/p&gt;&#xA;" OwnerUserId="23489" LastActivityDate="2020-07-17T15:07:41.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25258" PostTypeId="2" ParentId="25226" CreationDate="2020-07-17T17:08:11.350" Score="0" Body="&lt;p&gt;i'v same problem. Wifi: Intel(R) Wireless-AC 9560 160MHz.&#xA;Now connected via TP-Link TL-WN722N&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;dmesg | grep iwl&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    5.304699] iwlwifi 0000:00:14.3: TLV_FW_FSEQ_VERSION: FSEQ Version: 43.2.23.17&#xA;[    5.304954] iwlwifi 0000:00:14.3: loaded firmware version 48.4fa0041f.0 op_mode iwlmvm&#xA;[    5.525204] iwlwifi 0000:00:14.3: Detected Intel(R) Wireless-AC 9560 160MHz, REV=0x354&#xA;[    6.542555] iwlwifi 0000:00:14.3: Collecting data: trigger 15 fired.&#xA;[    6.542650] iwlwifi 0000:00:14.3: Start IWL Error Log Dump:&#xA;[    6.542657] iwlwifi 0000:00:14.3: Status: 0x00000000, count: -1634907666&#xA;[    6.542661] iwlwifi 0000:00:14.3: Loaded firmware version: 48.4fa0041f.0&#xA;[    6.542666] iwlwifi 0000:00:14.3: 0x5A54FDBE | ADVANCED_SYSASSERT          &#xA;[    6.542669] iwlwifi 0000:00:14.3: 0x4241D017 | trm_hw_status0&#xA;[    6.542672] iwlwifi 0000:00:14.3: 0xB5C509ED | trm_hw_status1&#xA;[    6.542675] iwlwifi 0000:00:14.3: 0x2C9D909C | branchlink2&#xA;[    6.542679] iwlwifi 0000:00:14.3: 0xF567E43D | interruptlink1&#xA;[    6.542682] iwlwifi 0000:00:14.3: 0xA1885322 | interruptlink2&#xA;[    6.542685] iwlwifi 0000:00:14.3: 0xA002F521 | data1&#xA;[    6.542688] iwlwifi 0000:00:14.3: 0xEDB18492 | data2&#xA;[    6.542691] iwlwifi 0000:00:14.3: 0x9C9FFFC5 | data3&#xA;[    6.542694] iwlwifi 0000:00:14.3: 0x1F001658 | beacon time&#xA;[    6.542697] iwlwifi 0000:00:14.3: 0x4BEB0398 | tsf low&#xA;[    6.542700] iwlwifi 0000:00:14.3: 0x06BAEC53 | tsf hi&#xA;[    6.542703] iwlwifi 0000:00:14.3: 0x3AC98CD8 | time gp1&#xA;[    6.542706] iwlwifi 0000:00:14.3: 0x2F82CD4A | time gp2&#xA;[    6.542710] iwlwifi 0000:00:14.3: 0x0885690C | uCode revision type&#xA;[    6.542713] iwlwifi 0000:00:14.3: 0x5D16B806 | uCode version major&#xA;[    6.542716] iwlwifi 0000:00:14.3: 0x5D0A9B7A | uCode version minor&#xA;[    6.542719] iwlwifi 0000:00:14.3: 0x8C95003E | hw version&#xA;[    6.542722] iwlwifi 0000:00:14.3: 0x787D3896 | board version&#xA;[    6.542725] iwlwifi 0000:00:14.3: 0xE390CFF0 | hcmd&#xA;[    6.542728] iwlwifi 0000:00:14.3: 0x54598986 | isr0&#xA;[    6.542731] iwlwifi 0000:00:14.3: 0x2FAC8FDE | isr1&#xA;[    6.542734] iwlwifi 0000:00:14.3: 0x5AAB7205 | isr2&#xA;[    6.542737] iwlwifi 0000:00:14.3: 0x8961E389 | isr3&#xA;[    6.542740] iwlwifi 0000:00:14.3: 0xD3E37B0A | isr4&#xA;[    6.542743] iwlwifi 0000:00:14.3: 0xB6D5D8B7 | last cmd Id&#xA;[    6.542746] iwlwifi 0000:00:14.3: 0x77A6BA5A | wait_event&#xA;[    6.542749] iwlwifi 0000:00:14.3: 0x93A044E8 | l2p_control&#xA;[    6.542752] iwlwifi 0000:00:14.3: 0xA2AD7B94 | l2p_duration&#xA;[    6.542755] iwlwifi 0000:00:14.3: 0x2EEC3E93 | l2p_mhvalid&#xA;[    6.542758] iwlwifi 0000:00:14.3: 0x144DF80B | l2p_addr_match&#xA;[    6.542761] iwlwifi 0000:00:14.3: 0xBC5583AD | lmpm_pmg_sel&#xA;[    6.542764] iwlwifi 0000:00:14.3: 0xC07CF1F0 | timestamp&#xA;[    6.542767] iwlwifi 0000:00:14.3: 0xC9FDD67D | flow_handler&#xA;[    6.542806] iwlwifi 0000:00:14.3: Start IWL Error Log Dump:&#xA;[    6.542810] iwlwifi 0000:00:14.3: Status: 0x00000000, count: 7&#xA;[    6.542813] iwlwifi 0000:00:14.3: 0x201013F1 | ADVANCED_SYSASSERT&#xA;[    6.542817] iwlwifi 0000:00:14.3: 0x00000000 | umac branchlink1&#xA;[    6.542820] iwlwifi 0000:00:14.3: 0xC008CF5C | umac branchlink2&#xA;[    6.542823] iwlwifi 0000:00:14.3: 0x00000000 | umac interruptlink1&#xA;[    6.542826] iwlwifi 0000:00:14.3: 0x00000000 | umac interruptlink2&#xA;[    6.542829] iwlwifi 0000:00:14.3: 0x00000003 | umac data1&#xA;[    6.542832] iwlwifi 0000:00:14.3: 0x20000302 | umac data2&#xA;[    6.542835] iwlwifi 0000:00:14.3: 0x01300202 | umac data3&#xA;[    6.542838] iwlwifi 0000:00:14.3: 0x00000030 | umac major&#xA;[    6.542841] iwlwifi 0000:00:14.3: 0x4FA0041F | umac minor&#xA;[    6.542844] iwlwifi 0000:00:14.3: 0x00005CA7 | frame pointer&#xA;[    6.542847] iwlwifi 0000:00:14.3: 0xC0887F58 | stack pointer&#xA;[    6.542850] iwlwifi 0000:00:14.3: 0x00000000 | last host cmd&#xA;[    6.542853] iwlwifi 0000:00:14.3: 0x00000000 | isr status reg&#xA;[    6.542872] iwlwifi 0000:00:14.3: Fseq Registers:&#xA;[    6.542892] iwlwifi 0000:00:14.3: 0x00000003 | FSEQ_ERROR_CODE&#xA;[    6.542897] iwlwifi 0000:00:14.3: 0x80260000 | FSEQ_TOP_INIT_VERSION&#xA;[    6.542917] iwlwifi 0000:00:14.3: 0x00020006 | FSEQ_CNVIO_INIT_VERSION&#xA;[    6.542939] iwlwifi 0000:00:14.3: 0x0000A384 | FSEQ_OTP_VERSION&#xA;[    6.542960] iwlwifi 0000:00:14.3: 0xCC164E51 | FSEQ_TOP_CONTENT_VERSION&#xA;[    6.542981] iwlwifi 0000:00:14.3: 0x4552414E | FSEQ_ALIVE_TOKEN&#xA;[    6.542985] iwlwifi 0000:00:14.3: 0x20000302 | FSEQ_CNVI_ID&#xA;[    6.543005] iwlwifi 0000:00:14.3: 0x01300202 | FSEQ_CNVR_ID&#xA;[    6.543010] iwlwifi 0000:00:14.3: 0x20000302 | CNVI_AUX_MISC_CHIP&#xA;[    6.543032] iwlwifi 0000:00:14.3: 0x01300202 | CNVR_AUX_MISC_CHIP&#xA;[    6.543054] iwlwifi 0000:00:14.3: 0x0000485B | CNVR_SCU_SD_REGS_SD_REG_DIG_DCDC_VTRIM&#xA;[    6.543105] iwlwifi 0000:00:14.3: 0xA5A5A5A2 | CNVR_SCU_SD_REGS_SD_REG_ACTIVE_VDIG_MIRROR&#xA;[    6.543141] iwlwifi 0000:00:14.3: SecBoot CPU1 Status: 0x5c17, CPU2 Status: 0x3&#xA;[    6.543145] iwlwifi 0000:00:14.3: Failed to start RT ucode: -110&#xA;[    6.543152] iwlwifi 0000:00:14.3: Firmware not running - cannot dump error&#xA;[    6.554600] iwlwifi 0000:00:14.3: Failed to run INIT ucode: -110&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;lspci&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Device 9b61 (rev 0c)&#xA;00:02.0 VGA compatible controller: Intel Corporation Device 9b41 (rev 02)&#xA;00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 0c)&#xA;00:08.0 System peripheral: Intel Corporation Xeon E3-1200 v5/v6 / E3-1500 v5 / 6th/7th Gen Core Processor Gaussian Mixture Model&#xA;00:12.0 Signal processing controller: Intel Corporation Device 02f9&#xA;00:14.0 USB controller: Intel Corporation Device 02ed&#xA;00:14.2 RAM memory: Intel Corporation Device 02ef&#xA;00:14.3 Network controller: Intel Corporation Device 02f0&#xA;00:15.0 Serial bus controller [0c80]: Intel Corporation Device 02e8&#xA;00:15.1 Serial bus controller [0c80]: Intel Corporation Device 02e9&#xA;00:16.0 Communication controller: Intel Corporation Device 02e0&#xA;00:17.0 SATA controller: Intel Corporation Device 02d3&#xA;00:19.0 Serial bus controller [0c80]: Intel Corporation Device 02c5&#xA;00:1c.0 PCI bridge: Intel Corporation Device 02bc (rev f0)&#xA;00:1d.0 PCI bridge: Intel Corporation Device 02b0 (rev f0)&#xA;00:1e.0 Communication controller: Intel Corporation Device 02a8&#xA;00:1e.3 Serial bus controller [0c80]: Intel Corporation Device 02ab&#xA;00:1f.0 ISA bridge: Intel Corporation Device 0284&#xA;00:1f.3 Audio device: Intel Corporation Device 02c8&#xA;00:1f.4 SMBus: Intel Corporation Device 02a3&#xA;00:1f.5 Serial bus controller [0c80]: Intel Corporation Device 02a4&#xA;01:00.0 3D controller: NVIDIA Corporation Device 1d13 (rev a1)&#xA;02:00.0 Non-Volatile memory controller: Sandisk Corp Device 5006&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23492" LastActivityDate="2020-07-17T17:08:11.350" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25260" PostTypeId="1" AcceptedAnswerId="25262" CreationDate="2020-07-17T22:07:11.917" Score="0" ViewCount="686" Body="&lt;p&gt;Whenever I try &lt;code&gt;sudo apt-get install wine-stable&lt;/code&gt;&#xA;I get&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;wine-stable : Depends: wine-stable-i386 (= 5.0.1~focal)&#xA;Depends: wine-stable-amd64 (= 5.0.1~focal) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am new to linux and cannot at all figure this out. I tired&#xA;&lt;code&gt;sudo apt-get install wine-stable-amd64&lt;/code&gt;&#xA;and&#xA;&lt;code&gt;sudo apt-get install wine-stable-i386&lt;/code&gt;&#xA;but both lead to more errors.&lt;/p&gt;&#xA;" OwnerUserId="23493" LastEditorUserId="9445" LastEditDate="2020-07-18T09:53:10.747" LastActivityDate="2020-07-30T11:53:25.490" Title="I cannot install WINE" Tags="|wine|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25262" PostTypeId="2" ParentId="25260" CreationDate="2020-07-18T10:03:55.840" Score="0" Body="&lt;p&gt;So I asume you followed the instructions on &lt;a href=&quot;https://wiki.winehq.org/Ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.winehq.org/Ubuntu&lt;/a&gt;. But since elementary OS is based on Ubuntu 18.04, you should have used the ppa for Ubuntu bionic, not focal.&lt;/p&gt;&#xA;&lt;p&gt;To try and fix the issue:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;please remove the focal ppa:&lt;br /&gt;&#xA;&lt;code&gt;sudo add-apt-repository --remove 'deb https://dl.winehq.org/wine-builds/ubuntu/ focal main'&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;follow the istructions from &lt;a href=&quot;https://linuxize.com/post/how-to-install-wine-on-ubuntu-18-04/#installing-wine-50-on-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxize.com/post/how-to-install-wine-on-ubuntu-18-04/#installing-wine-50-on-ubuntu&lt;/a&gt; to install wine.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&lt;p&gt;Since the instructions in the link at step 2 might be unavailable in the future, I'll paste them below (&lt;strong&gt;only of distributions based on Ubuntu 18.04&lt;/strong&gt;):&lt;/p&gt;&#xA;&lt;p&gt;Enable the 32-bit architecture and update the packages list:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386  &#xA;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Import the WineHQ repository’s GPG key using the following wget command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO- https://dl.winehq.org/wine-builds/winehq.key | sudo apt-key add -  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Add the WineHQ repository to your system:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common  &#xA;sudo apt-add-repository 'deb http://dl.winehq.org/wine-builds/ubuntu/ bionic main'  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install FAudio from the OBS repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO- https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/Release.key | sudo apt-key add -  &#xA;sudo sh -c 'echo &amp;quot;deb https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/ ./&amp;quot; &amp;gt; /etc/apt/sources.list.d/obs.list'  &#xA;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install Wine 5.0 package by typing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --install-recommends winehq-stable  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Verify the Wine installation:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wine --version  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The output should look something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wine-5.0  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-07-30T11:53:25.490" LastActivityDate="2020-07-30T11:53:25.490" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25263" PostTypeId="1" CreationDate="2020-07-18T13:49:17.440" Score="0" ViewCount="77" Body="&lt;p&gt;I've several partitions on my HDD, the main ones being my elementary OS one which shows up as &amp;quot;File System&amp;quot; in the sidebar, an NTFS data one called &amp;quot;Data&amp;quot;, which I've set to auto-mount to /media/data, and &amp;quot;Acer&amp;quot;, which holds my Windows stuff. Today I was trying to make ncmpcpp work with a Music folder I had in the Data partition, and the simplest solution seemed to be to mount it to my /home/user/Music, which seemed to work perfectly.&lt;/p&gt;&#xA;&lt;p&gt;Now, however, when I open the Files application, in the sidebar there's a bit of a mess.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NdwGg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NdwGg.png&quot; alt=&quot;Screenshot of the sidebar&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now there seem to be two Data drives (is that the correct term to use here? drives?), the top one, with the &amp;quot;this and this full&amp;quot; bar leading to the Music folder, and the bottom one leading to the actual Data partition. I would like for them to either switch places in the list, so that the &amp;quot;full&amp;quot; bar actually corresponds to the drive it is showing the info about (and, label the music one accordingly so it's less confusing), or, preferably, hide the Music folder one from the list entirely while still mounting it to /home/username/Music, such that ncmpcpp still can find my tracks and the sidebar is not cluttered.&lt;/p&gt;&#xA;&lt;p&gt;EDIT: changed nothing in any settings, but upon opening Files both Data entries now have the bar and are therefore indistinguishable if one does not know the position of each one.&lt;/p&gt;&#xA;&lt;p&gt;EDIT 2: I mounted the Music folder with adding &lt;code&gt;/media/data/Music    /home/username/Music    none    bind&lt;/code&gt; to fstab, as was suggested by some ncmpcpp user, then did &lt;code&gt;sudo mount -a&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23498" LastEditorUserId="23498" LastEditDate="2020-07-20T09:37:40.403" LastActivityDate="2023-12-09T07:04:35.560" Title="Show/hide &quot;used&quot; bar and/or entry in Files sidebar for specific drives?" Tags="|pantheon-files|mount|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25264" PostTypeId="1" CreationDate="2020-07-18T16:34:51.440" Score="0" ViewCount="363" Body="&lt;p&gt;Hi everyone having a look at this question.&#xA;As you might have read in the title I have really old computer with an intel pentium e2160 at 1.8ghz and 2gb ram.&#xA;Can I run elementary OS on it without lag.&#xA;Or if can't can you suggest any other OS which should run fine and has good user interface.&lt;/p&gt;&#xA;" OwnerUserId="23501" LastActivityDate="2024-01-02T18:08:41.203" Title="I have a really old desktop with an intel pentium e2160 and 2 gb ram. Can I run elementary os on it?" Tags="|system-installation|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25266" PostTypeId="2" ParentId="25242" CreationDate="2020-07-18T21:48:59.637" Score="0" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;i̶ ̶f̶o̶u̶n̶d̶ ̶t̶h̶i̶s̶ ̶p̶a̶g̶e̶ ̶b̶u̶t̶ ̶i̶ ̶h̶a̶v̶e̶n̶'̶t̶ ̶g̶o̶t̶t̶e̶n̶ ̶t̶o̶ ̶t̶r̶y̶ ̶i̶t̶ ̶y̶e̶t̶:̶ ̶h̶e̶a̶t̶h̶p̶a̶d̶d̶o̶c̶k̶.̶c̶o̶m̶/̶2̶0̶1̶4̶/̶0̶8̶/̶2̶5̶/̶d̶u̶a̶l̶-̶d̶o̶c̶k̶s̶-̶i̶n̶-̶e̶l̶e̶m̶e̶n̶t̶a̶r̶y̶-̶o̶s̶&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;A more simple way: &lt;a href=&quot;https://eos-techs.com/2020/05/14/howto-run-multiply-planks-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://eos-techs.com/2020/05/14/howto-run-multiply-planks-in-elementary-os/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The method mentioned by @Storm appears to work well.&#xA;it does add a few seconds to startup time though.&lt;/p&gt;&#xA;" OwnerUserId="23472" LastActivityDate="2020-07-18T21:48:59.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25271" PostTypeId="1" CreationDate="2020-07-19T06:28:42.463" Score="0" ViewCount="836" Body="&lt;p&gt;wondering if anyone has got the Validity Fingerprint reader 138a:0090 working with elementary OS? I'm running 5.1.6 and a noob. Have fumbled through the instructions found here: &lt;a href=&quot;https://launchpad.net/%7E3v1n0/+archive/ubuntu/libfprint-vfs0090&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~3v1n0/+archive/ubuntu/libfprint-vfs0090&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Seems like I may be missing something, or have done things out of sequence. (first tried installing fprint demo, via the Appcenter). Have been able to initialise the reader with validity-sensors-tools but that is as far as I can get. When running Fingerprint GUI, the message: no devices found! appears.&lt;/p&gt;&#xA;&lt;p&gt;Any pointers would be very welcome, especially from anyone who has got this working.&lt;/p&gt;&#xA;&lt;p&gt;My machine is the ThinkPad X1.&lt;/p&gt;&#xA;" OwnerUserId="23504" LastActivityDate="2020-08-07T23:37:41.440" Title="Validity Fingerprint 138a:0090 reader" Tags="|elementary-project|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25272" PostTypeId="1" CreationDate="2020-07-19T09:10:42.377" Score="0" ViewCount="104" Body="&lt;p&gt;I was using elementaryos after quite sometime and everything was working fine until today when I loged i after the suspend the sound was not working it was saying &amp;quot;No Output Device Detected&amp;quot; in my Audio Settings and exactly the similar case for the input device.&lt;a href=&quot;https://i.stack.imgur.com/C5xy8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C5xy8.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I appreciate your help&lt;/p&gt;&#xA;" OwnerUserId="23158" LastActivityDate="2024-03-29T01:06:21.167" Title="Sound is not working after the suspend. ElementaryOs 5.1" Tags="|sound|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25274" PostTypeId="1" CreationDate="2020-07-19T14:00:45.620" Score="0" ViewCount="20" Body="&lt;p&gt;I recently downloaded and installed elementary OS 5.1.6 Hera and am very happy with it except for some issues I am having with the shift+ select multiple files in various areas when it comes to downloading certain things like fonts. It highlights but does not connect in Font Manager I just installed. Only one font gets installed.&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="23510" LastActivityDate="2024-04-05T22:07:10.833" Title="Select muliple files does not function" Tags="|software-installation|system|fonts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25276" PostTypeId="1" CreationDate="2020-07-19T16:34:05.860" Score="1" ViewCount="81" Body="&lt;p&gt;I would like to login as root, but I cannot find a way to enable manual login on Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="23472" LastActivityDate="2024-04-02T17:06:25.790" Title="How to enable manual login?" Tags="|release-hera|greeter|system|user|root|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25278" PostTypeId="2" ParentId="25220" CreationDate="2020-07-19T23:43:13.293" Score="2" Body="&lt;p&gt;OK, I've figured it out myself following these instructions:&#xA;&lt;a href=&quot;https://github.com/smlinux/rtl8723de/blob/current/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/smlinux/rtl8723de/blob/current/README.md&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23457" LastActivityDate="2020-07-19T23:43:13.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25279" PostTypeId="1" CreationDate="2020-07-20T09:16:39.553" Score="1" ViewCount="202" Body="&lt;p&gt;When I was running Juno, I could go into Elementary Tweaks and set the number of columns &amp;amp; rows used in the Applications menu.&lt;/p&gt;&#xA;&lt;p&gt;I couldn't change spacing or icon size, but that was OK. Extra columns &amp;amp; rows made for less pages on the Applications Menu.&lt;/p&gt;&#xA;&lt;p&gt;For some reason now (with Hera) I can't do this anymore. I've been searching all over the web trying to find out why Elementary Tweaks doesn't do this anymore.&lt;/p&gt;&#xA;&lt;p&gt;Maybe it moved to somewhere else? So I've also been searching on the interwebs to find anything about changing the Applications Menu. Nada! Nothing! Zilch!&lt;/p&gt;&#xA;&lt;p&gt;I am currently using 5.1.6 and wonder why such a useful feature would have been removed.&lt;/p&gt;&#xA;&lt;p&gt;Anybody got any ideas about how to do this simple task in Hera??&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your help everyone!&lt;/p&gt;&#xA;&lt;p&gt;Christopher&lt;/p&gt;&#xA;" OwnerUserId="23513" LastActivityDate="2024-01-28T15:05:45.660" Title="What happened to the Applications Menu?" Tags="|release-hera|applications|icons|slingshot|menu|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25280" PostTypeId="2" ParentId="19256" CreationDate="2020-07-20T16:13:12.080" Score="0" Body="&lt;p&gt;In the elementary os AppCenter, there are two apps (i have installed) that can do that. They are: &lt;strong&gt;AppEditor&lt;/strong&gt; and &lt;strong&gt;Menu editor&lt;/strong&gt;. I recommend AppEditor over Menu Editor, because it lets you change app icons and the like. To give it the icon in the menu, turn on the &lt;code&gt;show hidden entries&lt;/code&gt; button. then, in the &lt;code&gt;search bar&lt;/code&gt;, &lt;code&gt;search&lt;/code&gt; for the app.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jpCsk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jpCsk.png&quot; alt=&quot;https://i.stack.imgur.com/SqkLv.png&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zHZ97.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zHZ97.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Don't forget to make sure it has the proper category though (music player) or you will have to edit the desktop file.&lt;/p&gt;&#xA;" OwnerUserId="23457" LastEditorUserId="23457" LastEditDate="2020-07-20T16:28:51.390" LastActivityDate="2020-07-20T16:28:51.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25281" PostTypeId="2" ParentId="25279" CreationDate="2020-07-20T16:40:05.727" Score="0" Body="&lt;p&gt;Maybe because of this?:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;What's New?&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Fully updated and working to reflect the changes of elementary OS&#xA;Juno&lt;/li&gt;&#xA;&lt;li&gt;elementary-tweaks now looks more &amp;quot;elementary&amp;quot;! We've rebuilt elementary tweaks &amp;gt; from the ground up to make it look like a native plug for your system's settings.&lt;/li&gt;&#xA;&lt;li&gt;Fixed: Removed theme-patcher and &lt;em&gt;&lt;strong&gt;other more dangerous settings that were causing problems&lt;/strong&gt;&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23457" LastActivityDate="2020-07-20T16:40:05.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25282" PostTypeId="1" CreationDate="2020-07-20T20:25:00.190" Score="0" ViewCount="520" Body="&lt;p&gt;The Jellyfin media app has instructions to &lt;a href=&quot;https://jellyfin.org/docs/general/administration/installing.html#ubuntu-repository&quot; rel=&quot;nofollow noreferrer&quot;&gt;install it via repository&lt;/a&gt; for Ubuntu releases (supported releases are xenial, bionic, cosmic, disco, eoan, and focal).&lt;/p&gt;&#xA;&lt;p&gt;The issue is with step 4. (shown below) because the command &lt;code&gt;lsb_release -c -s&lt;/code&gt; returns &lt;code&gt;hera&lt;/code&gt;, and this is not a Ubuntu release.&lt;/p&gt;&#xA;&lt;p&gt;Will it work if I manually set &lt;code&gt;bionic&lt;/code&gt;, which is the Ubuntu release that elementary OS is based on? Or will I bork my system?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Installation instructions:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install HTTPS transport for APT if you haven't already:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install apt-transport-https&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enable the Universe repository to obtain all the FFMpeg dependencies:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository universe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Import the GPG signing key (signed by the Jellyfin Team):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -O - https://repo.jellyfin.org/ubuntu/jellyfin_team.gpg.key |&#xA;sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add a repository configuration at &lt;code&gt;/etc/apt/sources.list.d/jellyfin.list&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;deb [arch=$( dpkg --print-architecture )]&#xA;https://repo.jellyfin.org/ubuntu $( lsb_release -c -s ) main&amp;quot; | sudo&#xA;tee /etc/apt/sources.list.d/jellyfin.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update APT repositories:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install Jellyfin:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install jellyfin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Manage the Jellyfin system service with your tool of choice:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo service jellyfin status&#xA;sudo systemctl restart jellyfin&#xA;sudo /etc/init.d/jellyfin stop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="9" LastActivityDate="2024-01-12T13:01:35.190" Title="Installing Jellyfin via Ubuntu's bionic repository" Tags="|applications|repositories|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25283" PostTypeId="1" CreationDate="2020-07-20T20:37:56.257" Score="0" ViewCount="64" Body="&lt;p&gt;I am new to elementary os.I was trying to dual boot elementary os and windows 10. So, my problem is that I installed elementary os by following the article from foss website. After I finished installing at the last step where I had to remove the pendrive I messed up. I removed pendrive before restarting the laptop. Now I can't even boot in to Windows or Linux.&lt;/p&gt;&#xA;" OwnerUserId="23516" LastActivityDate="2021-12-14T20:04:25.390" Title="How to fix media test error after installing elementary os?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25284" PostTypeId="2" ParentId="25264" CreationDate="2020-07-20T22:26:01.360" Score="0" Body="&lt;p&gt;You should be able to run elementary os on 2gb ram and 1.8ghz cpu. But in you might face lag when you open a lot of tabs in browser or trying to multitask in 3 or 4 apps. In any case, if it doesn't work out the way you want the. You can try other lightweight os like: lubuntu, unbuntu mate etc like those or if you want arch-linux then manjaro xfce.&lt;/p&gt;&#xA;" OwnerUserId="23516" LastActivityDate="2020-07-20T22:26:01.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25287" PostTypeId="1" CreationDate="2020-07-21T09:25:43.493" Score="0" ViewCount="168" Body="&lt;p&gt;Does anyone know if possible and if so how to change the theming/styling of Epiphany so that the active tab is standing out more. I find it hard to easily see which tab is active.&lt;/p&gt;&#xA;&lt;p&gt;thx&lt;/p&gt;&#xA;" OwnerUserId="19666" LastActivityDate="2024-01-14T20:03:15.520" Title="Is it possible to change theme/style for Epiphany so that the active tab is standing out more?" Tags="|release-hera|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25288" PostTypeId="1" CreationDate="2020-07-21T14:53:00.087" Score="1" ViewCount="66" Body="&lt;p&gt;running &lt;code&gt;elementary OS 5.1.6 Hera&lt;/code&gt; the logout doesn't work anymore after replacing the local account login by LDAP account login.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;journalctl&lt;/code&gt; reports&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Jul 17 15:35:01 eos wingpanel[4311]: EndSessionDialog.vala:184: Unable to logout:&#xA;GDBus.Error:org.freedesktop.login1.NoUserForPID: Caller does not belong to any logged in user or lingering user&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/NixOS/nixpkgs/issues/60496&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/NixOS/nixpkgs/issues/60496&lt;/a&gt; mentioned a problem with &lt;code&gt;light-locker&lt;/code&gt; but I didn't notice a problem with &lt;code&gt;light-locker&lt;/code&gt; on the system.&lt;/p&gt;&#xA;&lt;p&gt;Logout with local accounts work fine.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&lt;p&gt;For some reason the problem is solved after installing Debug-Symbols:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt install libnss-ldapd-dbgsym&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23520" LastEditorUserId="23520" LastEditDate="2020-10-22T11:10:27.797" LastActivityDate="2024-03-05T21:05:15.627" Title="Unable to logout with network account (LDAP)" Tags="|release-hera|wingpanel|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25289" PostTypeId="1" CreationDate="2020-07-21T16:42:22.530" Score="0" ViewCount="379" Body="&lt;p&gt;New to the forum and to elementary OS, trying it out and enjoying it very much for the moment, thanks to the devs!&lt;br /&gt;&#xA;I'm transferring a big folder from an external hard disk to the pc and I find it quite strange not to have a files transfer window popping up and showing me the transfer speed, the amount of time elapsed and so on.&lt;br /&gt;&#xA;Is it a deliberate decision not to have this window or is it just my fresh installation who's somehow missing it? Or is it an optional feature maybe?&lt;br /&gt;&#xA;Cheers,&lt;br /&gt;&#xA;Edoardo&lt;/p&gt;&#xA;" OwnerUserId="23521" LastActivityDate="2024-04-03T04:03:00.323" Title="No file transfer window?" Tags="|pantheon-files|files|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25290" PostTypeId="1" CreationDate="2020-07-21T20:52:07.580" Score="0" ViewCount="34" Body="&lt;p&gt;I just downloaded nautilus files and cinnamon files to try them out. I wanted to test the desktop on nautilus, and i didn't really have a reason to download cinnamon but i did. But now, I can't delete them.&lt;/p&gt;&#xA;" OwnerUserId="23457" LastActivityDate="2024-04-02T15:01:40.207" Title="installed nautilus and cinnamon files on the appcenter, now i can't delete them" Tags="|release-hera|applications|appcenter|files|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25291" PostTypeId="2" ParentId="25290" CreationDate="2020-07-22T06:07:33.017" Score="0" Body="&lt;p&gt;Use terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge nameoftheapp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge nautilus&#xA;sudo apt remove --purge cinnamon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-22T06:07:33.017" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25292" PostTypeId="2" ParentId="25288" CreationDate="2020-07-22T06:25:00.937" Score="0" Body="&lt;p&gt;Report the issue on Elementary OS github here: &lt;a href=&quot;https://github.com/elementary/os/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-22T06:25:00.937" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25293" PostTypeId="2" ParentId="25283" CreationDate="2020-07-22T06:27:51.953" Score="1" Body="&lt;p&gt;Put the usb stick once again, power on machine hold F12, choose the usb stick to boot and try to install the Elementary OS again. You can select the existing partition with Elementary OS as a target partition.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-22T06:27:51.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25294" PostTypeId="2" ParentId="25276" CreationDate="2020-07-22T06:54:12.413" Score="0" Body="&lt;p&gt;First read this article just to learn the basis. &lt;a href=&quot;https://www.redhat.com/sysadmin/sysadmins-dont-sudo&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.redhat.com/sysadmin/sysadmins-dont-sudo&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then the best idea is to type sudo visudo and add yourself to the root group or wheel (Red Hat, CentOS, Fedora).&lt;/p&gt;&#xA;&lt;p&gt;You must read about the visudo command and how to make a user as an additional root admin in the system.&lt;/p&gt;&#xA;&lt;p&gt;I do not want to write an elaborate.&lt;/p&gt;&#xA;&lt;p&gt;Just for your information that it is not secure. Probably, I did not check it, there is a need to edit a .profile file or .bashrc file to make it work. But I need to check it.&lt;/p&gt;&#xA;&lt;p&gt;Anyway it this is really bad idea, because you may just screw your system. Root is God and God can create and destroy.&lt;/p&gt;&#xA;&lt;p&gt;There is no need to run as root every day with elevated permissions. This way you will run every app as root and simple java script during browsing the Internet with any browser will be able to harm your system because of elevated level.&lt;/p&gt;&#xA;&lt;p&gt;We use su or sudo. I usually use:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo su - &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo -i&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To work as root in terminal.&lt;/p&gt;&#xA;&lt;p&gt;But this is for experienced users. I do not recommended to work as root for inexperienced user.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-22T06:54:12.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25295" PostTypeId="2" ParentId="25271" CreationDate="2020-07-22T07:04:15.993" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:3v1n0/libfprint-vfs0090 &#xA;sudo apt-get update&#xA;sudo apt install fprint_demo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I guess the last command, because I do not know the name of the package.&lt;/p&gt;&#xA;&lt;p&gt;The second solution is here: &lt;a href=&quot;https://askubuntu.com/questions/1120849/installing-libfprint-0-99-0-using-meson-and-ninja&quot;&gt;https://askubuntu.com/questions/1120849/installing-libfprint-0-99-0-using-meson-and-ninja&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;However I would like to ask you to open terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And check does it show missing firmware.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-07-22T07:04:15.993" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="25296" PostTypeId="1" AcceptedAnswerId="25298" CreationDate="2020-07-22T09:49:26.237" Score="0" ViewCount="28" Body="&lt;p&gt;I added to docker &amp;quot;Show Desktop&amp;quot;, &amp;quot;Power&amp;quot; etc.&lt;/p&gt;&#xA;&lt;p&gt;I cant remove it from the docker now.&lt;/p&gt;&#xA;&lt;p&gt;If I press the right mouse button, it doesn't respond(only for &amp;quot;show desktop&amp;quot;, &amp;quot;power&amp;quot;).&lt;/p&gt;&#xA;&lt;p&gt;Can you help me?&lt;/p&gt;&#xA;" OwnerUserId="23525" LastActivityDate="2020-07-22T13:01:19.247" Title="Delete on the docker 'show desktop'" Tags="|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25297" PostTypeId="2" ParentId="2769" CreationDate="2020-07-22T11:39:06.120" Score="1" Body="&lt;p&gt;Press Ctrl + Shift + Esc to start Task Manager.&#xA;When Task Manager opens, locate Desktop Windows Manager, right click it and choose End Task.&lt;/p&gt;&#xA;" OwnerUserId="23527" LastActivityDate="2020-07-22T11:39:06.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25298" PostTypeId="2" ParentId="25296" CreationDate="2020-07-22T12:01:08.937" Score="1" Body="&lt;p&gt;Drag them away from the Plank with left mouse button.&lt;/p&gt;&#xA;" OwnerUserId="19143" LastActivityDate="2020-07-22T12:01:08.937" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25300" PostTypeId="2" ParentId="25289" CreationDate="2020-07-22T14:28:53.643" Score="0" Body="&lt;p&gt;You should see a progress bar in the icon in the dock? There are some known bugs in the progress window at the moment e.g. see &lt;a href=&quot;https://github.com/elementary/files/issues/1275&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1275&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/files/issues/1050&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1050&lt;/a&gt;.&#xA;I find that after some file transfers, the operation is  not properly cleaned up (e.g. the progress bar in the plank icon may continue to show) which may affect subsequent operations.  Hopefully it will be fixed in the not too distant future.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-07-22T14:28:53.643" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25301" PostTypeId="1" AcceptedAnswerId="25308" CreationDate="2020-07-22T23:53:21.823" Score="0" ViewCount="134" Body="&lt;p&gt;I'd love to use &lt;a href=&quot;https://www.systutorials.com/docs/linux/man/1-xsetwacom/&quot; rel=&quot;nofollow noreferrer&quot;&gt;xsetwacom&lt;/a&gt; to look into some wacom issues &amp;amp; features. For example improving the usability with multiple monitors. But I can't find or install it.&lt;/p&gt;&#xA;&lt;p&gt;Following:&#xA;&lt;a href=&quot;https://medium.com/@microaeris/setting-up-wacom-tablets-with-ubuntu-16-04-d7277e4a595d&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@microaeris/setting-up-wacom-tablets-with-ubuntu-16-04-d7277e4a595d&lt;/a&gt;&#xA;I have &lt;code&gt;libwacom2&lt;/code&gt; and &lt;code&gt;libwacom-common&lt;/code&gt; already installed, but I can't install &lt;code&gt;xserver-xorg-input-wacom&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-input-wacom                              &#xA;[sudo] password for peteruithoven:       &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; xserver-xorg-input-wacom : Depends: xserver-xorg-core (&amp;gt;= 2:1.18.99.901)&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The suggested changes when trying to install &lt;code&gt;xserver-xorg-core&lt;/code&gt; seemed like a bad idea:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-core                        &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  libxatracker2 libxvmc1 x11-apps x11-session-utils xinit xinput xserver-xorg-legacy-hwe-18.04&#xA;Use 'sudo apt autoremove' to remove them.&#xA;Suggested packages:&#xA;  xfonts-100dpi | xfonts-75dpi&#xA;The following packages will be REMOVED:&#xA;  elementary-desktop xorg xserver-xorg-core-hwe-18.04 xserver-xorg-hwe-18.04 xserver-xorg-input-all-hwe-18.04&#xA;  xserver-xorg-input-libinput-hwe-18.04 xserver-xorg-video-all-hwe-18.04 xserver-xorg-video-amdgpu-hwe-18.04&#xA;  xserver-xorg-video-ati-hwe-18.04 xserver-xorg-video-fbdev-hwe-18.04 xserver-xorg-video-intel-hwe-18.04&#xA;  xserver-xorg-video-nouveau-hwe-18.04 xserver-xorg-video-qxl-hwe-18.04 xserver-xorg-video-radeon-hwe-18.04&#xA;  xserver-xorg-video-vesa-hwe-18.04 xserver-xorg-video-vmware-hwe-18.04&#xA;The following NEW packages will be installed:&#xA;  xserver-xorg-core&#xA;0 upgraded, 1 newly installed, 16 to remove and 62 not upgraded.&#xA;Need to get 1351 kB of archives.&#xA;After this operation, 5291 kB disk space will be freed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;What is the way to install xsetwacom on elementary OS Hera? Is there an alternative?&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="15904" LastEditDate="2020-07-23T00:20:34.927" LastActivityDate="2020-07-23T18:57:19.643" Title="xsetwacom on elementary OS Hera?" Tags="|release-hera|package-management|wacom|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25304" PostTypeId="1" CreationDate="2020-07-23T13:21:39.570" Score="1" ViewCount="59" Body="&lt;p&gt;I am new to Elementary OS and I understand there is no integration of google account like there is in Gnome but there is an option to add google calendar. I am looking to add my Gsuite account's calendar. may I know how to do it? is it possible?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2023-12-24T23:06:10.790" Title="How to add and sync Gsuite calender in calender?" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25305" PostTypeId="2" ParentId="12452" CreationDate="2020-07-23T13:37:21.497" Score="0" Body="&lt;p&gt;Adding/editing &lt;code&gt;greeter-setup-script=/usr/bin/numlockx on&lt;/code&gt; in &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt; works for me on &lt;code&gt;elementary OS 5.1.6 Hera&lt;/code&gt; very well. &lt;a href=&quot;https://wiki.archlinux.org/index.php/LightDM#NumLock_on_by_default&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/LightDM#NumLock_on_by_default&lt;/a&gt; confirms this solution. Just for the case someone else is looking for a way to enable NumLock in login screen on default.&lt;/p&gt;&#xA;" OwnerUserId="23520" LastActivityDate="2020-07-23T13:37:21.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25308" PostTypeId="2" ParentId="25301" CreationDate="2020-07-23T18:57:19.643" Score="0" Body="&lt;p&gt;here i have &lt;code&gt;libwacom-bin/dev/common&lt;/code&gt;, &lt;code&gt;libwacom2&lt;/code&gt; and &lt;code&gt;xserver-xorg-input-wacom-hwe-18.04&lt;/code&gt; installed, and the xsetwacom is on the system.&lt;/p&gt;&#xA;" OwnerUserId="6525" LastActivityDate="2020-07-23T18:57:19.643" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25309" PostTypeId="1" CreationDate="2020-07-24T09:27:08.003" Score="0" ViewCount="691" Body="&lt;p&gt;I've been trying to install l2tp on my Elementary OS Hera machine. I haven't found any guide for this that is specific to Elementary, and while the related packages appear in my apt search, the option to use l2tp is not appearing in my network manager.&lt;/p&gt;&#xA;&lt;p&gt;This is the command I entered after adding the ppa:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install network-manager-l2tp network-manager-l2tp-gnome &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; network-manager-l2tp : Depends: xl2tpd but it is not installable&#xA;                        Depends: strongswan but it is not installable or&#xA;                                 libreswan but it is not installable&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure if these dependency issues can be resolved - is l2tp simply not compatible with Elementary? Help would be appreciated!&lt;/p&gt;&#xA;" OwnerUserId="23538" LastActivityDate="2021-08-13T23:43:41.497" Title="Trouble installing L2TP vpn protocol on Elementary" Tags="|networking|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25311" PostTypeId="1" CreationDate="2020-07-24T11:39:41.193" Score="1" ViewCount="88" Body="&lt;p&gt;I've installed ElementaryOS, and it won't boot.&lt;/p&gt;&#xA;&lt;p&gt;It shows me the ElementaryOS Logo, but then it changes to a terminal with the cursor blinking.&lt;/p&gt;&#xA;&lt;p&gt;There is no text in the terminal whatsoever.&lt;/p&gt;&#xA;&lt;p&gt;Please help quickly, as I would like to use ElementaryOS.&lt;/p&gt;&#xA;&lt;p&gt;I tried using boot-repair, didn't help either :(&lt;/p&gt;&#xA;&lt;p&gt;If it's helpful, I had Ubuntu 20.04 on it before, and I deleted the boot partition in the installation process of ElementaryOS.(I wiped the entire Drive in the Installation menu)&lt;/p&gt;&#xA;&lt;p&gt;Secureboot is disabled, it is set to UEFI mode.&lt;/p&gt;&#xA;" OwnerUserId="23540" LastActivityDate="2024-04-06T14:03:30.403" Title="ElementaryOS Won't boot after normal installation from live USB" Tags="|system-installation|boot|grub|uefi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25312" PostTypeId="2" ParentId="25311" CreationDate="2020-07-24T14:20:13.573" Score="0" Body="&lt;p&gt;May I know if you are using this in a PC or laptop? If laptop, are you plugged in or not. I can't remember which distro but once I had this issue if I am not plugged in.&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-24T14:20:13.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25314" PostTypeId="2" ParentId="25263" CreationDate="2020-07-24T16:06:37.637" Score="0" Body="&lt;p&gt;The only answer to this is to get it fixed in the source code so an issue needs to be raised at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; - I will do that for you.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-07-24T16:06:37.637" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25316" PostTypeId="1" CreationDate="2020-07-24T18:13:49.683" Score="1" ViewCount="174" Body="&lt;p&gt;I am running Elementary OS &lt;em&gt;(5.1.6 Hera)&lt;/em&gt; on my laptop and everything was running fine. And then one day, I just couldn't log in. Entering the password just refreshed the screen and showed the interface for logging in again.&lt;/p&gt;&#xA;&lt;p&gt;After doing a quick search online, I found out how to switch to &lt;em&gt;Terminal&lt;/em&gt; &lt;code&gt;Ctrl + Alt + F1&lt;/code&gt; and log in through there. I tried to run a &lt;code&gt;sudo apt-get update&lt;/code&gt; command to see if there were some updates that would fix the issue and got prompted with the error that my hard disk was full.&lt;/p&gt;&#xA;&lt;p&gt;I ran some remove commands &lt;code&gt;rm -rf directory&lt;/code&gt; on some folders within the &lt;em&gt;Downloads&lt;/em&gt; directory and that freed up some space. I rebooted, which took me back to the interface for the login screen and I could log in fine.&lt;/p&gt;&#xA;&lt;p&gt;I have a 250 GB hard drive. The total size of contents in my home folder amounts to 4.6 GB. I had no idea what is / has filled the other 245 GB. I tried running a &lt;code&gt;sudo apt-get autoremove&lt;/code&gt; command and a &lt;code&gt;sudo apt-get clean&lt;/code&gt; command to see if that would help - but it barely removed anything.&lt;/p&gt;&#xA;&lt;p&gt;After doing some digging, it appears that in the &lt;code&gt;/var/log&lt;/code&gt; directory there is over 200 GB of &amp;quot;stuff&amp;quot;. Split between the file &lt;code&gt;kern.log.1&lt;/code&gt; and &lt;code&gt;syslog.1&lt;/code&gt; - both weighing in at 100 GB each.&lt;/p&gt;&#xA;&lt;p&gt;The Code app doesn't really want to open a 100 GB log file, so I've not really looked inside the log files to see what's happening. But why would Elementary OS do this? What would make it generate a set of such a massive log files that it fills my hard disk and disables the ability to log in?&lt;/p&gt;&#xA;" OwnerUserId="23547" LastActivityDate="2024-04-06T23:09:21.127" Title="Can't login - hard disk is full due to massive log files" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25318" PostTypeId="1" CreationDate="2020-07-24T20:20:24.550" Score="1" ViewCount="56" Body="&lt;p&gt;What is the terminal command elementary os uses to maximize minimized windows?&lt;/p&gt;&#xA;&lt;p&gt;I know the parameters are to only maximize the active window if it is minimized and if it is maximized minimize it.&lt;/p&gt;&#xA;&lt;p&gt;so far i've figured out how to maximize the active windows by using the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -r :ACTIVE: -b add,maximized_vert,maximized_horz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;however, this does not minimize the window if it is maximized.&lt;/p&gt;&#xA;&lt;p&gt;Im looking to replicate it elsewhere.&lt;/p&gt;&#xA;&lt;p&gt;Thanks. &lt;/p&gt;&#xA;" OwnerUserId="23548" LastActivityDate="2020-07-24T20:20:24.550" Title="what command does elementary os use to maximize windows in hot corners?" Tags="|settings|pantheon-terminal|command-line|hot-corners|gnome-terminal|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25319" PostTypeId="2" ParentId="25226" CreationDate="2020-07-25T03:48:24.370" Score="0" Body="&lt;p&gt;I believe this can help you&lt;/p&gt;&#xA;&lt;p&gt;Try restarting the wingpanel by &lt;code&gt;killall wingpanel&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;If that doesn't work, try checking if you have &lt;code&gt;indicator-applet&lt;/code&gt; &amp;amp; &lt;code&gt;indicator-application&lt;/code&gt; installed or not.&lt;/p&gt;&#xA;&lt;p&gt;If you already have them installed, try reinstalling &lt;code&gt;libappindicator&lt;/code&gt; and then logout and log back in.&lt;/p&gt;&#xA;&lt;p&gt;Use the following command to reinstall &lt;code&gt;libappindicator&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libappindicator3-1 libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If the above solutions doesn't work. Try reinstalling the network manager&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall network-manager network-manager-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23532" LastEditorUserId="23532" LastEditDate="2020-07-25T03:56:59.257" LastActivityDate="2020-07-25T03:56:59.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25320" PostTypeId="2" ParentId="13134" CreationDate="2020-07-25T04:00:50.723" Score="0" Body="&lt;p&gt;I understand I am answering this late but this may be helpful for others at some point of time.&lt;/p&gt;&#xA;&lt;p&gt;try reinstalling &lt;code&gt;libappindicator&lt;/code&gt; and then logout and log back in.&lt;/p&gt;&#xA;&lt;p&gt;Use the following command to reinstall &lt;code&gt;libappindicator&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libappindicator3-1 libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-25T04:00:50.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25321" PostTypeId="2" ParentId="22573" CreationDate="2020-07-25T04:07:41.213" Score="0" Body="&lt;p&gt;Try this&#xA;reinstall &lt;code&gt;libappindicator&lt;/code&gt; and then logout and log back in.&lt;/p&gt;&#xA;&lt;p&gt;Use the following command to reinstall &lt;code&gt;libappindicator&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libappindicator3-1 libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If the above solutions doesn't work. Try reinstalling the network manager&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall network-manager network-manager-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-25T04:07:41.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25322" PostTypeId="2" ParentId="19589" CreationDate="2020-07-25T04:11:03.583" Score="0" Body="&lt;p&gt;I believe this can help you&lt;/p&gt;&#xA;&lt;p&gt;Check if you have &lt;code&gt;indicator-applet&lt;/code&gt; &amp;amp; &lt;code&gt;indicator-application&lt;/code&gt; installed or not.&lt;/p&gt;&#xA;&lt;p&gt;If you already have them installed, try reinstalling &lt;code&gt;libappindicator&lt;/code&gt; and then logout and log back in.&lt;/p&gt;&#xA;&lt;p&gt;Use the following command to reinstall &lt;code&gt;libappindicator&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall libappindicator3-1 libappindicator1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If the above solutions doesn't work. Try reinstalling the network manager&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall network-manager network-manager-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-25T04:11:03.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25323" PostTypeId="2" ParentId="25274" CreationDate="2020-07-25T06:15:35.093" Score="0" Body="&lt;p&gt;The solution is mentioned by @Sysadmin. I adding further detail for ease understanding.&#xA;The fonts are stored in &lt;code&gt;/usr/share/fonts&lt;/code&gt; folder. Just open this folder as administrator and copy-paste all eh fonts you downloaded in respective folders such as &lt;code&gt;OpenType&lt;/code&gt;, &lt;code&gt;TrueType&lt;/code&gt; and extract the files if it is in zip.&lt;/p&gt;&#xA;&lt;p&gt;After this, the fonts will be available in all Softwares across your system. In case if your software is open while doing this process. You have to close and reopen for the font to be available.&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-25T06:15:35.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25324" PostTypeId="2" ParentId="25271" CreationDate="2020-07-25T07:49:24.630" Score="0" Body="&lt;p&gt;I think I've got closer to finding the issue with this. I've tried this:&lt;/p&gt;&#xA;&lt;p&gt;purged everything fprint related, rebooted and started from scratch.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Initialised with validity tools&#xA;sudo add-apt-repository ppa:3v1n0/libfprint-vfs0090&#xA;sudo apt-get update&#xA;Reboot&#xA;sudo apt install fprint_demo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Rebooted and ran dpkg -l '&lt;em&gt;fprint&lt;/em&gt;'&lt;/p&gt;&#xA;&lt;p&gt;The output is without errors:&lt;/p&gt;&#xA;&lt;p&gt;Desired=Unknown/Install/Remove/Purge/Hold&#xA;| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend&#xA;|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)&#xA;||/ Name                  Version         Architecture    Description&#xA;+++-=====================-===============-===============-================================================&#xA;ii  fprint-demo           20080303git-6   amd64           simple GTK+ testing libfprint's functions&#xA;ii  libfprint0            1:0.7.0-git2018 amd64           fingerprint library of fprint project, shared li&lt;/p&gt;&#xA;&lt;p&gt;Ran lsusb and the output includes the fingerprint sensor:&#xA;Bus 001 Device 004: ID 138a:0090 Validity Sensors, Inc.&lt;/p&gt;&#xA;&lt;p&gt;I think this tells me the sensor is recognised by the system, however fprint-demo (and fingerprint gui) do not recognise the device.&lt;/p&gt;&#xA;&lt;p&gt;Running fprint-demo and still get 'no devices found'.&lt;/p&gt;&#xA;&lt;p&gt;I then found these instructions:&lt;/p&gt;&#xA;&lt;p&gt;You need to add a new udev 110 rule to allow access to the device.&#xA;My rule was ATTRS{idVendor}==&amp;quot;138a&amp;quot;, ATTRS{idProduct}==&amp;quot;0011&amp;quot;, MODE=&amp;quot;0664&amp;quot;, GROUP=&amp;quot;plugdev&amp;quot; but you need to change some parameters.&#xA;GROUP must be a group your user is in.&#xA;ATTRS{idVendor}:ATTRS{idProduct} describe your device and can be found with lsusb&lt;/p&gt;&#xA;&lt;p&gt;However, this is the extent of my knowledge and unsure how to follow these instructions. Will keep chipping away at it.&lt;/p&gt;&#xA;" OwnerUserId="23504" LastActivityDate="2020-07-25T07:49:24.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25325" PostTypeId="1" CreationDate="2020-07-25T10:38:03.607" Score="1" ViewCount="21" Body="&lt;p&gt;I've been attempting to dual-boot Windows 10 and ElementaryOS, but have 0 success so far.&lt;/p&gt;&#xA;&lt;p&gt;Whenever I try to boot from USB after selecting it in the boot menu, I really shortly see the logo of my laptop manufacturer then shows a pure black screen, and starts over. It keeps doing this until I stop it and boot via Windows again.&lt;/p&gt;&#xA;&lt;p&gt;Here are my specs in case you need them:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Manufacturer: Lenovo&lt;/li&gt;&#xA;&lt;li&gt;Model: Ideapad 110&lt;/li&gt;&#xA;&lt;li&gt;CPU: AMD A6&lt;/li&gt;&#xA;&lt;li&gt;Memory: 8GB RAM&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Feel free to let me know if you need to know anything else! Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="23553" LastActivityDate="2020-07-25T10:38:03.607" Title="Not getting any response while trying to install from USB" Tags="|boot|dual-boot|usb-drive|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25326" PostTypeId="1" CreationDate="2020-07-25T11:32:18.380" Score="1" ViewCount="11" Body="&lt;p&gt;I'd like to be able to run the Pantheon DE and vanilla GNOME Shell side-by-side, with my DE of choice being simply a log-in option.&lt;/p&gt;&#xA;&lt;p&gt;Is that possible?&lt;/p&gt;&#xA;" OwnerUserId="8725" LastActivityDate="2020-07-25T11:32:18.380" Title="Is it possible to have a separate vanilla GNOME session?" Tags="|gnome|desktop-environment|session|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25327" PostTypeId="1" AcceptedAnswerId="25330" CreationDate="2020-07-25T12:53:08.737" Score="1" ViewCount="84" Body="&lt;p&gt;I'm hoping someone can help me. I'm trying out elementary os as a desktop os and have so far been impressed by how much of my home computing use is covered straightaway. installing a few extra apps from the store was nice and easy, also for an app not in store (spotify).&lt;/p&gt;&#xA;&lt;p&gt;One thing I am missing from mac/pc though is adobe lightroom. I understand I can run LR6 in wine, but I would prefer a native app over an emulator.&lt;/p&gt;&#xA;&lt;p&gt;I have found Lightzone (&lt;a href=&quot;https://lightzoneproject.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://lightzoneproject.org&lt;/a&gt;) which seems great, but I don't know how to install it.&lt;/p&gt;&#xA;&lt;p&gt;I've used terminal to do&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:lightzone-team/lightzone&#xA;&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But I seem to be missing a last instruction to actually install - can someone fill in the blank?&lt;/p&gt;&#xA;&lt;p&gt;cheers,&#xA;John&lt;/p&gt;&#xA;" OwnerUserId="23555" LastActivityDate="2020-07-25T23:39:15.770" Title="Installing 'Lightzone' as a linux n00b" Tags="|software-installation|apt|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25328" PostTypeId="2" ParentId="22187" CreationDate="2020-07-25T15:20:09.993" Score="0" Body="&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386  &#xA;&#xA;wget -nc https://dl.winehq.org/wine-builds/winehq.key &#xA;&#xA;sudo apt-key add winehq.key  &#xA;&#xA;sudo apt install software-properties-common  &#xA;&#xA;sudo add-apt-repository ppa:cybermax-dexter/sdl2-backport  &#xA;&#xA;sudo apt-add-repository 'deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main'  &#xA;&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt install --install-recommends winehq-stable &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2020-07-25T15:20:09.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25329" PostTypeId="2" ParentId="25316" CreationDate="2020-07-25T23:36:28.110" Score="0" Body="&lt;p&gt;I'm not sure what would cause those files to become so large, but you can safely delete rotated log files within that directory. This keeps the current log so you can still investigate any issues you might not be aware of.&lt;/p&gt;&#xA;&lt;h3&gt;List files to be deleted&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo find /var/log -type f -regex &amp;quot;.*\.[0-9]$&amp;quot;&#xA;sudo find /var/log -type f -regex &amp;quot;.*\.gz$&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Delete files&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo find /var/log -type f -regex &amp;quot;.*\.[0-9]$&amp;quot; -delete&#xA;sudo find /var/log -type f -regex &amp;quot;.*\.gz$&amp;quot; -delete&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Stop logs becoming so large&lt;/h2&gt;&#xA;&lt;p&gt;This setting will allow 7 days of logs, each no larger than 1 GB. A similar system could be added for &lt;code&gt;kern.log&lt;/code&gt; as well.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo nano /etc/logrotate.d/rsyslog&lt;/code&gt; and add &lt;code&gt;maxsize&lt;/code&gt; option:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/var/log/syslog&#xA;{&#xA;    rotate 7&#xA;    daily&#xA;    maxsize 1G # add this line&#xA;    missingok&#xA;    notifempty&#xA;    delaycompress&#xA;    compress&#xA;    postrotate&#xA;        /usr/lib/rsyslog/rsyslog-rotate&#xA;    endscript&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2020-07-25T23:36:28.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25330" PostTypeId="2" ParentId="25327" CreationDate="2020-07-25T23:39:15.770" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://launchpad.net/%7Elightzone-team/+archive/ubuntu/lightzone&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa:lightzone-team/lightzone&lt;/a&gt; only appears to contain the package &lt;code&gt;lightzone&lt;/code&gt;, and AFAIK the new &lt;code&gt;add-apt-repository&lt;/code&gt; command updates source automatically, so these are the full commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:lightzone-team/lightzone&#xA;sudo apt install lightzone&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26" LastActivityDate="2020-07-25T23:39:15.770" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25331" PostTypeId="1" CreationDate="2020-07-26T00:13:39.980" Score="0" ViewCount="87" Body="&lt;p&gt;Is there a way to enable some kind of autoupdate in the appcenter updates?&#xA;I'm using Elementary OS Hera 5.1.6&lt;/p&gt;&#xA;" OwnerUserId="19046" LastActivityDate="2024-04-06T21:00:45.130" Title="Is there a way to enable some kind of autoupdate in the appcenter updates?" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25332" PostTypeId="2" ParentId="25331" CreationDate="2020-07-26T06:17:58.310" Score="0" Body="&lt;p&gt;AppCenter does not upgrade any packages without you asking it to.&#xA;When you boot, appcenter perform an &amp;quot;update&amp;quot; of the package cache in the background. This is the equivalent of &lt;code&gt;sudo apt update&lt;/code&gt;. This doesn't modify any packages, it simply contacts the software repositories to see if any newer packages are available and you will get a notification if any updates are available. After this, you can choose whether to update or not.&lt;/p&gt;&#xA;&lt;p&gt;Read more: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/9unxae/appcenter_auto_update/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Appcenter Auto update&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-07-26T06:17:58.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25333" PostTypeId="1" CreationDate="2020-07-26T08:02:09.837" Score="0" ViewCount="267" Body="&lt;p&gt;I have a USB dongle for Wifi, a TP-Link one, which is basically a realtek card (I believe). In the beginning it worked, now though Switchboard shows the oxymoron &amp;quot;Cable unplugged&amp;quot; on my wireless connection.&lt;/p&gt;&#xA;&lt;p&gt;I've tried &lt;code&gt;sudo ifconfig wlxe8de27078274 up&lt;/code&gt; and it works,  but switchboard does not change its state, even after I restart the &lt;code&gt;network-manager&lt;/code&gt;. I can also successfully search for Wifi connections using &lt;code&gt;sudo iwlist wlxe8de27078274 scan | grep ESSID&lt;/code&gt;, of course only after I enable the card using ifconfig. To my surprise though, &lt;code&gt;nmtui&lt;/code&gt; does not show my card.&lt;/p&gt;&#xA;&lt;p&gt;I believe the problem must be somewhere in the initialization of the card's driver when the system boots.&lt;/p&gt;&#xA;&lt;p&gt;I've tried installing the realtek dkms drivers, and &lt;code&gt;bcmwl-kernel-source&lt;/code&gt;, but to no avail.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2764u.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2764u.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13261" LastActivityDate="2023-12-10T06:04:25.673" Title="&quot;Cable unplugged&quot; For wireless connection" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25335" PostTypeId="1" CreationDate="2020-07-26T10:06:16.877" Score="0" ViewCount="228" Body="&lt;p&gt;Two finger scroll doesn't work on elementaryOS 5.1.6 Hera:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Built on Ubuntu 18.04.4 LTS&lt;/li&gt;&#xA;&lt;li&gt;Linux 5.4.0-42-generic&lt;/li&gt;&#xA;&lt;li&gt;VMware SVGA II Adapter&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Things I have already tried:&lt;/h3&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/942/23558&quot;&gt;Touchpad not working on ASUS x550&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:hanipouspilot/focaltech-dkms&#xA;sudo apt-get update&#xA;sudo apt-get install focaltech-dkms&#xA;sudo modprobe -r psmouse &#xA;sudo modprobe psmouse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/q/4270/23558&quot;&gt;Two-finger Scroll is not working for my touchpad of ASUS X200MA&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Installing &lt;code&gt;xserver-xorg-input-synaptics&lt;/code&gt; left my distro inaccessible after a reboot, keyboard and mouse stopped working.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Because of 3. i couldn't try &lt;code&gt;synclient VertTwoFingerScroll=1&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;Touchpad Setting&lt;/h2&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8mMY2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8mMY2.png&quot; alt=&quot;Touchpad Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;xinput list logs&lt;/h2&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kccLG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kccLG.png&quot; alt=&quot;xinput list logs&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;lspci logs&lt;a href=&quot;https://i.stack.imgur.com/nrHUI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nrHUI.png&quot; alt=&quot;lspci logs&quot; /&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;p&gt;Thanks for the help!&lt;/p&gt;&#xA;" OwnerUserId="23558" LastActivityDate="2020-08-22T10:46:18.650" Title="Two Finger Scrolling doesn't work on elementaryOS Hera on VMWare Player" Tags="|release-hera|touchpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25336" PostTypeId="1" CreationDate="2020-07-26T14:04:21.940" Score="1" ViewCount="172" Body="&lt;p&gt;(Left) Clicking on the trash can in Plank, or right clicking on it and selecting &amp;quot;Open Trash&amp;quot; opens Code--&lt;em&gt;the text editor&lt;/em&gt;--instead of Files.&lt;/p&gt;&#xA;&lt;p&gt;My first thought was to check if any nonsense associations had been made in &lt;code&gt;~/.local/share/applications/mimeinfo.cache&lt;/code&gt; or &lt;code&gt;~/.config/mimeapps.list&lt;/code&gt;, but all I found was &lt;code&gt;application/octet-stream=io.elementary.code.desktop;&lt;/code&gt; in the latter--which I removed.&lt;/p&gt;&#xA;&lt;p&gt;As expected, this changed nothing (&lt;code&gt;application/octet-stream&lt;/code&gt; is the mimetype for binary data; the trash icon in plank opens a folder, which has the mimetype &lt;code&gt;inode/directory&lt;/code&gt;).*&lt;/p&gt;&#xA;&lt;p&gt;Maybe Code is overriding Files' association to open folders (&lt;code&gt;inode/directory&lt;/code&gt;)?&lt;/p&gt;&#xA;&lt;p&gt;Installed software versions:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;pantheon-code 3.4.1-1&#xA;pantheon-files 4.4.3-1&#xA;plank 0.11.89-2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;*Off topic: It is very common to find that some application has been nonsensically associated with &lt;code&gt;application/octet-stream&lt;/code&gt;. Basically, this happens &lt;em&gt;every&lt;/em&gt; time you open the wrong type of file in some application (although, technically, it should only happen when you open a &lt;em&gt;binary&lt;/em&gt; file in an application). Despite that you may even have &lt;em&gt;unchecked&lt;/em&gt; the option to &amp;quot;Set this as default&amp;quot; when you made this mistake--perhaps knowing it was probably the wrong application for that file--this is &lt;em&gt;always&lt;/em&gt; set as default. The only way to &lt;em&gt;unset&lt;/em&gt; this is to edit either &lt;code&gt;mimeinfo.cache&lt;/code&gt; or &lt;code&gt;mimeapps.list&lt;/code&gt; and remove the nonsense association. I have done this countless times and I am wondering when, if ever, linux desktops will cease to inflict this suffering on their users.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastActivityDate="2020-10-04T14:31:44.597" Title="Why does the trash can in Plank open Code instead of Files?" Tags="|plank|files|code|mimetype|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25337" PostTypeId="2" ParentId="25336" CreationDate="2020-07-26T14:04:21.940" Score="1" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;Maybe Code is overriding Files' association to open folders (&lt;code&gt;inode/directory&lt;/code&gt;)?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Yes, that is the case. Both have an association with &lt;code&gt;inode/directory&lt;/code&gt; in their .desktop file. Somehow Code's association gets priority (my &lt;em&gt;guess&lt;/em&gt; is either it goes to the most recently updated application or the one with the name in the earliest alphanumerical order).&lt;/p&gt;&#xA;&lt;p&gt;This can be demonstrated by uninstalling Code, and observing that the trash can in Plank resumes opening Files to view the Trash folder; then reinstalling Code and observing that the trash can in Plank again opens Code.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;To work around the problem, remove the &lt;code&gt;inode/directory;&lt;/code&gt; association from Code's .desktop file, and update the mimetype cache:&lt;/p&gt;&#xA;&lt;p&gt;Find this line in &lt;code&gt;/usr/share/applications/io.elementary.code.desktop&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;MimeType=text/plain;inode/directory;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change it to:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;MimeType=text/plain;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then run (SUID):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# update-desktop-database&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Note that subsequent upgrades of Code will undo this fix (&lt;a href=&quot;https://github.com/elementary/code/issues/856&quot; rel=&quot;nofollow noreferrer&quot;&gt;unless I can convince upstream to remove the association&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;To keep it, copy the edited .desktop file for Code to &lt;code&gt;~/.local/share/applications/io.elementary.code.desktop&lt;/code&gt;, creating an override:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cp {/usr,~/.local}/share/applications/io.elementary.code.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;To select Code from Files' &amp;quot;Open in..&amp;quot; context menu, you need a secondary--masked--.desktop file:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/quequotion/code/blob/patch-1/data/open-pantheon-code-here.desktop.in.in&quot; rel=&quot;nofollow noreferrer&quot;&gt;.local/share/applications/open-pantheon-code-here.desktop&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;See it in action &lt;a href=&quot;https://youtu.be/lR6OHPWly6Y&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="6206" LastEditorUserId="6206" LastEditDate="2020-10-04T14:31:44.597" LastActivityDate="2020-10-04T14:31:44.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25339" PostTypeId="1" CreationDate="2020-07-26T18:32:57.913" Score="0" ViewCount="197" Body="&lt;p&gt;Is there a way to create a custom keyboard shortcut that &lt;strong&gt;centers&lt;/strong&gt; the current / selected window on the screen?&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to create a custom keyboard shortcut that &lt;strong&gt;resizes&lt;/strong&gt; the current / selected window to a previously defined specific size?&lt;/p&gt;&#xA;&lt;p&gt;In Windows 10, I use a small utility named &amp;quot;Sizer&amp;quot; by BrianApps (&lt;a href=&quot;http://www.brianapps.net/sizer4/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.brianapps.net/sizer4/&lt;/a&gt;), which allows to accurately resize and reposition windows and I have grown very accustomed to it. Now, I am looking for a way to achieve this in elementary OS. Is there any &lt;strong&gt;additional software&lt;/strong&gt; I could use for this same purpose?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zSU5h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zSU5h.png&quot; alt=&quot;Sizer Configuration Menu&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iYGto.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iYGto.png&quot; alt=&quot;Sizer Entry Custom Size and Position&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23561" LastActivityDate="2023-12-10T21:03:15.413" Title="How to create a custom keyboard shortcut to center window in screen and resize to specific size" Tags="|window-management|window-manager|window-decoration|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25342" PostTypeId="2" ParentId="12692" CreationDate="2020-07-27T05:10:21.297" Score="1" Body="&lt;p&gt;So, I ran into this issue recently and found a decent workaround that fixes this. It is caused due to the GTK client side decorations. Hence, we can disable it temporarily for DrRacket.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;After installing DrRacket, open the startup script&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In my case, I installed at &lt;code&gt;/usr/bin/drracket&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In &lt;strong&gt;your case&lt;/strong&gt;, you would need to edit &lt;code&gt;~/racket/bin/drracket&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;vi /usr/bin/drracket&lt;/code&gt; (or) &lt;code&gt;vi ~/racket/bin/drracket&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add this line at the head of the script&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Workaround to remove client side decoration&#xA;GTK_CSD=&amp;quot;&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Save and exit. Now, open DrRacket and it should work fine.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="19705" LastEditorUserId="19705" LastEditDate="2020-07-27T05:20:25.923" LastActivityDate="2020-07-27T05:20:25.923" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25343" PostTypeId="1" CreationDate="2020-07-27T11:25:20.900" Score="0" ViewCount="50" Body="&lt;p&gt;When connected to a mobile hotspot, after 15 minutes or so, I need to restart the Network Manager to access the internet. Wifi shows connected to the network but Firefox shows no internet. This happens frequently if I don't use the internet.&lt;/p&gt;&#xA;&lt;p&gt;System configuration&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;Kernel&lt;/strong&gt; - Linux 5.4.0-42-generic&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;OS&lt;/strong&gt; - elementary OS 5.1.6 Hera&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Laptop&lt;/strong&gt; - Dell Inspiron 7075&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;CPU&lt;/strong&gt; - Intel 8th gen i7 -  8550U&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="3412" LastActivityDate="2023-12-25T03:07:25.847" Title="Network Manager requires frequent restarting to access the internet when connected via a mobile hotspot" Tags="|release-hera|wifi|networking|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25345" PostTypeId="2" ParentId="11462" CreationDate="2020-07-27T14:50:35.440" Score="0" Body="&lt;p&gt;I also encountered this problem right after switching from windows.&#xA;Turns out that my laptop didn't have enough ram to run my stuff and Elementary OS only had ~1GB of swap allocated. This caused freezing problems.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;So the solution was to increase swap size.&lt;/strong&gt; Here are the commands I used:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;create a size 16G file called swapfile in /  &lt;br&gt;&#xA;&lt;code&gt;sudo fallocate -l 16G /swapfile&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;set the file as swap space &lt;br&gt;&#xA;&lt;code&gt;sudo mkswap /swapfile&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;set the swap file as permanent (or it will disappear after reboot) &lt;br&gt;&#xA;&lt;code&gt;echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;After this we can use commands like &lt;code&gt;htop&lt;/code&gt; to see if swap is increased.&lt;/p&gt;&#xA;" OwnerUserId="23567" LastActivityDate="2020-07-27T14:50:35.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25346" PostTypeId="2" ParentId="25333" CreationDate="2020-07-27T15:52:14.423" Score="0" Body="&lt;p&gt;Apparently sometimes the wifi is getting softblocked by network manager. The solution was unblocking it using &lt;code&gt;nmcli r wifi on&lt;/code&gt;. I don't really know how this happened, but it's certainly a bug. I will probably report it to the network switchboard plugin github issues later.&lt;/p&gt;&#xA;" OwnerUserId="13261" LastActivityDate="2020-07-27T15:52:14.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25348" PostTypeId="2" ParentId="22523" CreationDate="2020-07-28T01:47:52.520" Score="0" Body="&lt;p&gt;I'm experiencing exactly the same problem on an Alienware 17 R5.&lt;/p&gt;&#xA;&lt;p&gt;For what it's worth, the deadly update contained the following packages:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;2020-07-25 16:14:21 install linux-modules-5.4.0-42-generic:amd64 &amp;lt;none&amp;gt; 5.4.0-42.46~18.04.1&#xA;2020-07-25 16:14:22 install linux-image-5.4.0-42-generic:amd64 &amp;lt;none&amp;gt; 5.4.0-42.46~18.04.1&#xA;2020-07-25 16:14:22 install linux-modules-extra-5.4.0-42-generic:amd64 &amp;lt;none&amp;gt; 5.4.0-42.46~18.04.1&#xA;2020-07-25 16:14:25 install linux-hwe-5.4-headers-5.4.0-42:all &amp;lt;none&amp;gt; 5.4.0-42.46~18.04.1&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;A kind fellow Linux user on Twitter gave me the idea for the fix.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Boot into recovery mode (Should be the entry right after the current one in Grub with the word 'recovery' at the end).&lt;/li&gt;&#xA;&lt;li&gt;Enable networking (Should be on the recovery boot menu you see)&lt;/li&gt;&#xA;&lt;li&gt;Run ubuntu-drivers install&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;In my case, I'd been running the 435 nvidia driver and this command properly installed the 440 driver, fixing my problem.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="22486" LastEditorUserId="22486" LastEditDate="2020-07-28T16:04:32.067" LastActivityDate="2020-07-28T16:04:32.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25350" PostTypeId="2" ParentId="25339" CreationDate="2020-07-28T10:48:47.933" Score="0" Body="&lt;p&gt;You can get the requested functionality using &lt;code&gt;wmctrl&lt;/code&gt;. For example, the following command moves the active window to position X:400, Y:300, and resizes it to 800x500 px.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wmctrl -r :ACTIVE: -e 0,400,300,800,500&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To bind it to a key, just go to Settings &amp;gt; Keyboard &amp;gt; Shortcuts and create a custom shortcut with the command.&lt;/p&gt;&#xA;&lt;p&gt;Check the &lt;a href=&quot;https://linux.die.net/man/1/wmctrl&quot; rel=&quot;nofollow noreferrer&quot;&gt;man pages&lt;/a&gt; for more info about &lt;code&gt;wmctrl&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="23572" LastActivityDate="2020-07-28T10:48:47.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25353" PostTypeId="1" AcceptedAnswerId="25354" CreationDate="2020-07-29T00:18:16.997" Score="0" ViewCount="1076" Body="&lt;p&gt;I definitely used to be able to select a set of files in File Manager and right-click &amp;gt;&amp;gt; &amp;quot;Compress&amp;quot; and pick the format (e.g. .tar.gz). I &lt;em&gt;think&lt;/em&gt; I used to be able to right-click a compressed file and choose &amp;quot;Extract Here&amp;quot; or something like that but I'm not sure. Anyway, those options are now missing.&lt;/p&gt;&#xA;&lt;p&gt;I think they disappeared when I uninstalled zip and unzip as per the suggestions here:&#xA;&lt;a href=&quot;https://wiki.debian.org/ReduceDebian&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.debian.org/ReduceDebian&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Since then I have reinstalled zip and unzip, but the menu options in File Manager have not returned. Any idea what I can do to be able to Compress, Extract from File Manager?&lt;/p&gt;&#xA;" OwnerUserId="19891" LastActivityDate="2022-06-11T19:05:48.803" Title="Compress and Extract options missing" Tags="|desktop|filesystem|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25354" PostTypeId="2" ParentId="25353" CreationDate="2020-07-29T06:34:15.363" Score="0" Body="&lt;p&gt;Those options are created when installing &lt;a href=&quot;https://wiki.gnome.org/Apps/FileRoller&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome Archive Manager&lt;/a&gt;. It comes preisntalled with elementary OS. We can asume it's missing in your installation.&lt;/p&gt;&#xA;&lt;p&gt;Try reinstalling it with &lt;code&gt;sudo apt install --reinstall file-roller&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-07-29T06:34:15.363" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25357" PostTypeId="1" AcceptedAnswerId="25360" CreationDate="2020-07-29T13:11:06.243" Score="1" ViewCount="69" Body="&lt;p&gt;I notice they have Vala shown front and center, but I'd much rather use electron with React so I don't have to learn a whole new language. Would they accept a submission in React?&lt;/p&gt;&#xA;&lt;p&gt;Found this:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Your app may be written in any language, but the front-end must be a&#xA;native Gtk3 app. Web, Electron, Qt, Java, and other non-native app&#xA;front-ends will be rejected during the review process. A game may be&#xA;excepted from this requirement so long as it uses native window&#xA;decorations and is generally usable on both loDPI and HiDPI displays.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23579" LastEditorUserId="15904" LastEditDate="2020-08-05T14:04:53.237" LastActivityDate="2020-08-05T14:04:53.237" Title="Do I have to use Vala to build my app to get it on the App Store?" Tags="|development|vala|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25358" PostTypeId="1" CreationDate="2020-07-29T13:33:52.420" Score="1" ViewCount="27" Body="&lt;p&gt;After installing an application in java on the first run it worked normally, on the second run the application opens, but it is not possible to click on any option in the application menu.&lt;/p&gt;&#xA;&lt;p&gt;This is the link that the application&#xA;&lt;a href=&quot;https://downloads.prosysopc.com/opc-ua-simulation-server-downloads.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://downloads.prosysopc.com/opc-ua-simulation-server-downloads.php&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23581" LastActivityDate="2023-12-12T07:04:15.440" Title="Unable to access Java application menu" Tags="|applications|user-interface|java|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25359" PostTypeId="1" CreationDate="2020-07-29T13:37:08.887" Score="0" ViewCount="127" Body="&lt;p&gt;I installed the &lt;a href=&quot;https://element.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Element&lt;/a&gt; messaging app on Elementary OS and there is no visual notifications when somebody writes a message, only the audio notifications work i.e. a sound is played when I receive a message.&lt;/p&gt;&#xA;&lt;p&gt;On Ubuntu, it looks like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Uccpk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Uccpk.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;On Elementary OS there is no visual hint on whether you received a message or not in the dock or anywhere else:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Kulme.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kulme.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm using &lt;code&gt;plank&lt;/code&gt; as dock:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LkUQx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LkUQx.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;On other messaging apps such as Skype, there is a small red glowing dot underneath the icon when you have an unread message(the dot changes to blue when there are no unread messages).&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have any idea whether it is possible to have the same behavior for Element? Or if not, is it possible to have some kind of a visual hint when one has an unread message?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="23580" LastActivityDate="2023-12-25T02:00:40.103" Title="Visual notifications not working with Element app" Tags="|plank|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25360" PostTypeId="2" ParentId="25357" CreationDate="2020-07-29T14:29:55.133" Score="0" Body="&lt;p&gt;I think the critical thing is that your app follow Elementary's &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines#human-interface-guidelines&quot; rel=&quot;nofollow noreferrer&quot;&gt;Human Interface Guideline&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'd be super curious to learn whether or not Electron could create an app that conforms to these.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-29T14:29:55.133" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25362" PostTypeId="1" CreationDate="2020-07-29T14:56:16.373" Score="0" ViewCount="460" Body="&lt;p&gt;My PROBLEM today (numbered below) and SOLUTIONS (lettered A, B and C).&#xA;Scroll to Solutions below (but may be helpful to see if you have same problem).&lt;/p&gt;&#xA;&lt;p&gt;PROBLEM:&#xA;1)Powered off computer yesterday which I never do since I moved desk.&#xA;When powered on, system automatically booted to&#xA;e splash (normal), but no green NVIDIA logo (knew something was wrong...)&#xA;then went straight to recovery and grub.&#xA;Tried to just normally boot from there (my first error). Nothing.&lt;/p&gt;&#xA;&lt;p&gt;2)Powered off and tried to boot into recovery (No keystrokes worked).&#xA;Tried about 10 times. Zero response.&lt;/p&gt;&#xA;&lt;p&gt;3)System would boot past e logo, no green NVIDIA logn then into Elementary black login screen and ask for my password. Noticed screen would flicker time at top super quick then update with a time 5 minutes into future (ooh. This little glitch continued at login screen for these 10 attempts. Weird). Would put in password. No error but loop back into same again and again--not accepting password. (*Other user reported this issue in terminal here)&lt;/p&gt;&#xA;&lt;p&gt;4)Finally, entered password. Hit enter. Hurry for next part before it loops you back into the same password box!&lt;/p&gt;&#xA;&lt;p&gt;5)For the few seconds of black screen before looping back, decided to enter terminal and it worked (yea)-- I think I did Alt-F2, but Ctrl-Alt-T may also work. You'll be in terminal.&lt;/p&gt;&#xA;&lt;p&gt;6)I did the following. I'm not sure if first 2 commands (A, B) worked or if it was the last command that worked (C), so I'm putting them all in order. It's possible just C would do it. Others? Thanks. I THINK the problem is with the NVIDIA drivers and is with Linux perhaps and NOT Elementary per one user:&lt;/p&gt;&#xA;&lt;p&gt;(Copied instructions to myself in case this occurs again. I spent about 2 hours looking  up solutions on my phone so perhaps this will help someone else. Thanks. Please note I'm a newbie to Linux so sorry for length and improper terms.)&lt;/p&gt;&#xA;&lt;p&gt;Please note: *I apologize as I took screenshots of solutions both on this site and on searches for over 2 hours, so I can't attribute solutions to correct thread or author. If it's your solution, please chime in below with my BIGGEST THANKS!&lt;/p&gt;&#xA;&lt;p&gt;SOLUTION:&#xA;(see above to enter terminal from black screen and stuck-in-password loop)&lt;/p&gt;&#xA;&lt;p&gt;From terminal: (also may be to access from recovery or grub)&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;login with username &amp;amp; password. This time, my password worked fine.&#xA;Login as root. Elementary is good at telling us commands to use.&#xA;I learned &amp;quot;sudo&amp;quot; before prompts does this (not sure why it doesn't do this natively)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;SOLUTIONS:&#xA;*please note A and B may not be necessary; maybe you can skip to C, but this is order that worked for me after 2 hours of research/trying to get to GUI:&lt;/p&gt;&#xA;&lt;p&gt;A)&#xA;sudo apt-get purge nvidia-*&lt;/p&gt;&#xA;&lt;p&gt;sudo add-apt repository ppa:graphics-drivers/ppa&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get install nvidia-440&lt;/p&gt;&#xA;&lt;p&gt;(or try sudo apt-get install nvidia-driver440)&lt;/p&gt;&#xA;&lt;p&gt;B)sudo ubuntu-drivers install&lt;/p&gt;&#xA;&lt;p&gt;then follow the Elementary prompts (this step may not be necessary)&lt;/p&gt;&#xA;&lt;p&gt;C)sudo apt-get install xserver-xorg-input-all&lt;/p&gt;&#xA;&lt;p&gt;reboot&lt;/p&gt;&#xA;&lt;p&gt;After doing step C, my issue was fixed, I was able to login correctly, and ran software updates (1 available).  I cannot say for sure if it was all three steps above in terminal that fixed it or just the final step C, which a user proposed here (can't find--but thank you!).&lt;/p&gt;&#xA;&lt;p&gt;Maybe this will save someone 2 hours :-).&lt;/p&gt;&#xA;&lt;p&gt;THANK YOU!&lt;/p&gt;&#xA;&lt;p&gt;*2009 iMac desktop (wiped, running Elementary only, no dual-boot)&lt;/p&gt;&#xA;" OwnerUserId="23582" LastActivityDate="2023-12-11T22:08:10.957" Title="My solution: stuck at black screen/password screen after running software updates this week:" Tags="|boot|pantheon-terminal|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25363" PostTypeId="1" CreationDate="2020-07-29T15:07:38.290" Score="1" ViewCount="118" Body="&lt;p&gt;Really want to install Elementary but ..&lt;/p&gt;&#xA;&lt;p&gt;I have a Dell all-in-one which has been running Linux Mint Tricia dual booted with Windows 7 without problem for a few months.&lt;/p&gt;&#xA;&lt;p&gt;I would love to replace Linux Mint with Elementary OS,  I need to keep W7 for Adobe CC use.&lt;/p&gt;&#xA;&lt;p&gt;I wiped Linux Mint, re-extended the partition and set about installing Elementary next to W7.&lt;/p&gt;&#xA;&lt;p&gt;I made boot media and was pleased to find it ran beautifully in “live”mode.&lt;/p&gt;&#xA;&lt;p&gt;Every attempt to install it though has ended in the same way; the install seems to proceed as expected and I am finally asked to remove the USB install media and press enter. I am met with a black screen with a cursor.&lt;/p&gt;&#xA;&lt;p&gt;Forcing a reboot gives me an option menu Windows / Elementary / Elementary other. I can access Windows from here but choosing Elementary leads me to the same black screen and curser.&lt;/p&gt;&#xA;&lt;p&gt;I did try one of the “Elementary other” options but that was no better.&lt;/p&gt;&#xA;&lt;p&gt;I have tried installing from USB and DVD; same result&lt;/p&gt;&#xA;&lt;p&gt;I have tried installing with/without updates and drivers.&lt;/p&gt;&#xA;&lt;p&gt;Googling the problem indicates that this is a problem that others have experienced and nVidia graphics is mentioned as one area of difficulty… fast boot was also mentioned..&lt;/p&gt;&#xA;&lt;p&gt;I poked around my non-eufi bios and didn’t find any means of switching off my graphics card or any reference to fast boot … I considered taking the back off the pc and disconnecting the connection to the nVidia graphics card but google tells me that the card is welded to the board ..&lt;/p&gt;&#xA;&lt;p&gt;So having spent 2 days trying, I eventually gave up and went back to Linux Mint (another Ubuntu derivative of course) which installed first time without problem.&lt;/p&gt;&#xA;&lt;p&gt;I am not here to moan but to ask for help. Any idea where I can go from here ? Surely the fact that I can boot to a “live” session suggests that an installation should be possible ….&lt;/p&gt;&#xA;&lt;p&gt;With thanks for your time&lt;/p&gt;&#xA;&lt;p&gt;K&lt;/p&gt;&#xA;" OwnerUserId="23583" LastActivityDate="2023-12-12T00:01:45.223" Title="Why can't I install this ? Linux Mint installs fine" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25364" PostTypeId="2" ParentId="25363" CreationDate="2020-07-29T15:34:30.133" Score="0" Body="&lt;p&gt;This sounds exactly like the problem I had with a recent elementary update.&lt;/p&gt;&#xA;&lt;p&gt;If your Dell all in one uses Nvidia graphics, get to the Grub menu (If you're booting Elementary automatically with no menu, hold down the Shift key).&lt;/p&gt;&#xA;&lt;p&gt;Then you should see several entries, one with the latest kernel (Mine's 5.4.0-48). Pick the one after that that'll look something like 5.4.0-48 (Recovery).&lt;/p&gt;&#xA;&lt;p&gt;Once you get to the recovery menu, choose &amp;quot;Enable networking&amp;quot;. Then choose the &amp;quot;root' option to get a root shell.&lt;/p&gt;&#xA;&lt;p&gt;Once there, run the following command: ubuntu-drivers install&lt;/p&gt;&#xA;&lt;p&gt;This will install the latest Nvidia drivers and may well fix your problem as it did for me.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-29T15:34:30.133" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25365" PostTypeId="2" ParentId="25362" CreationDate="2020-07-29T15:37:50.267" Score="0" Body="&lt;p&gt;You might consider using 'ubuntu-drivers install' instead, it will handle the purging and installing safely.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-29T15:37:50.267" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25366" PostTypeId="2" ParentId="25358" CreationDate="2020-07-29T15:40:13.227" Score="0" Body="&lt;p&gt;Try running the Java application from the console if you can, because often errors like that are displayed on stdout or stderror.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-29T15:40:13.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25367" PostTypeId="1" CreationDate="2020-07-29T17:58:49.477" Score="1" ViewCount="198" Body="&lt;p&gt;I can't detect my brother DCP-195C printer. When I do a &lt;code&gt;sudo brsaneconfig3 -d&lt;/code&gt; the printer appears in the list. But &lt;code&gt;scanimage -L&lt;/code&gt; doesn't detect it. Please help. I'm very tired.&lt;/p&gt;&#xA;&lt;p&gt;It's connected via USB most guides are for network printers&#xA;Tried guides from the following links, nothing worked:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/791556/brother-scanner-not-working-in-ubuntu-16-04-though-driver-installed&quot;&gt;Brother scanner not working in Ubuntu 16.04 though driver installed&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1048816/how-to-detect-a-brother-scanner-connected-via-usb&quot;&gt;How to detect a Brother scanner connected via USB&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Doing a&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg -l | grep -i Brother&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Results to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ii  brother-udev-rule-type1                    1.0.0-1                                          all          Brother udev rule type 1&#xA;ii  brscan-skey                                0.3.1-1                                          amd64        Brother Linux scanner S-KEY tool&#xA;ii  brscan3                                    0.2.13-1                                         amd64        Brother Scanner Driver&#xA;ii  dcp195ccupswrapper:i386                    1.1.3-1                                          i386         Brother CUPS Inkjet Printer Definitions&#xA;ii  dcp195clpr:i386                            1.1.3-1                                          i386         Brother lpr Inkjet Printer Definitions&#xA;ii  printer-driver-brlaser                     4-1                                              amd64        printer driver for (some) Brother laser printers&#xA;ii  printer-driver-ptouch                      1.4.2-3                                          amd64        printer driver Brother P-touch label printers&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then doing a&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo brsaneconfig3 -d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Results to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;-----------------------------&#xA;cat /etc/fstab&#xA;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt; &amp;lt;mount point&amp;gt;   &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;       &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;# / was on /dev/sda5 during installation&#xA;UUID=fc8eb79b-06b7-483b-9acb-6a41dd6dbb75 /               ext4    errors=remount-ro 0       1&#xA;# /boot/efi was on /dev/sda2 during installation&#xA;UUID=B417-4B70  /boot/efi       vfat    umask=0077      0       1&#xA;/swapfile                                 none            swap    sw              0       0&#xA;-----------------------------&#xA;sane-find-scanner&#xA;&#xA;  # sane-find-scanner will now attempt to detect your scanner. If the&#xA;  # result is different from what you expected, first make sure your&#xA;  # scanner is powered up and properly connected to your computer.&#xA;&#xA;  # No SCSI scanners found. If you expected something different, make sure that&#xA;  # you have loaded a kernel SCSI driver for your SCSI adapter.&#xA;&#xA;found USB scanner (vendor=0x138a, product=0x0017) at libusb:001:006&#xA;found USB scanner (vendor=0x04f9 [Brother], product=0x0222 [DCP-195C]) at libusb:001:008&#xA;  # Your USB scanner was (probably) detected. It may or may not be supported by&#xA;  # SANE. Try scanimage -L and read the backend's manpage.&#xA;&#xA;  # Not checking for parallel port scanners.&#xA;&#xA;  # Most Scanners connected to the parallel port or other proprietary ports&#xA;  # can't be detected by this program.&#xA;-----------------------------&#xA;ls -R -all /proc/bus/usb&#xA;ls: cannot access '/proc/bus/usb': No such file or directory&#xA;-----------------------------&#xA;cat /proc/bus/usb/devices&#xA;cat: /proc/bus/usb/devices: No such file or directory&#xA;-----------------------------&#xA;scanimage -L&#xA;&#xA;No scanners were identified. If you were expecting something different,&#xA;check that the scanner is plugged in, turned on and detected by the&#xA;sane-find-scanner tool (if appropriate). Please read the documentation&#xA;which came with this software (README, FAQ, manpages).&#xA;-----------------------------&#xA;-----------------------------&#xA;/usr/local/Brother/sane/brsanenetdevice3.cfg:&#xA;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/Brsane3.ini:&#xA;[Support Model]&#xA;&#xA;&#xA;0x0206,14,2,&amp;quot;DCP-145C&amp;quot;&#xA;0x0204,14,2,&amp;quot;DCP-165C&amp;quot;&#xA;0x0205,13,2,&amp;quot;DCP-185C&amp;quot;&#xA;0x0201,14,2,&amp;quot;DCP-385C&amp;quot;&#xA;0x0200,14,2,&amp;quot;DCP-585CW&amp;quot;&#xA;0x01ff,13,2,&amp;quot;DCP-535CN&amp;quot;&#xA;0x01fe,14,1,&amp;quot;MFC-250C&amp;quot;&#xA;0x01fd,13,1,&amp;quot;MFC-290C&amp;quot;&#xA;0x01fb,13,1,&amp;quot;MFC-490CW&amp;quot;&#xA;0x01fa,13,1,&amp;quot;MFC-490CN&amp;quot;&#xA;0x01f9,13,1,&amp;quot;MFC-790CW&amp;quot;&#xA;0x01f8,13,1,&amp;quot;MFC-990CW&amp;quot;&#xA;0x01f7,14,1,&amp;quot;MFC-670CD&amp;quot;&#xA;0x01f6,13,1,&amp;quot;MFC-930CDN&amp;quot;&#xA;0x01f5,13,1,&amp;quot;MFC-5490CN&amp;quot;&#xA;0x01f4,13,1,&amp;quot;MFC-5890CN&amp;quot;&#xA;0x01f1,13,2,&amp;quot;DCP-6690CW&amp;quot;&#xA;0x01f3,13,1,&amp;quot;MFC-6490CW&amp;quot;&#xA;0x01f2,13,1,&amp;quot;MFC-6490CN&amp;quot;&#xA;&#xA;0x01f0,13,1,&amp;quot;MFC-6890CDW&amp;quot;&#xA;0x01ef,13,1,&amp;quot;MFC-6890CN&amp;quot;&#xA;&#xA;0x0207,14,2,&amp;quot;DCP-163C&amp;quot;&#xA;0x0208,14,2,&amp;quot;DCP-167C&amp;quot;&#xA;0x0203,14,2,&amp;quot;DCP-383C&amp;quot;&#xA;0x0202,14,2,&amp;quot;DCP-387C&amp;quot;&#xA;0x01fc,13,1,&amp;quot;MFC-297C&amp;quot;&#xA;&#xA;0x01ee,1,1,&amp;quot;MFC-7450&amp;quot;,131,4&#xA;0x01ed,1,1,&amp;quot;MFC-7840N&amp;quot;,131,4&#xA;0x01eb,1,1,&amp;quot;MFC-7320&amp;quot;,131,4&#xA;0x01ea,2,2,&amp;quot;DCP-7030&amp;quot;,131,4&#xA;0x01e9,1,2,&amp;quot;DCP-7040&amp;quot;,131,4&#xA;0x01e8,1,2,&amp;quot;DCP-7045N&amp;quot;,131,4&#xA;0x01e7,1,1,&amp;quot;MFC-7340&amp;quot;,131,4&#xA;0x01e6,1,1,&amp;quot;MFC-7440N&amp;quot;,131,4&#xA;0x01e5,1,1,&amp;quot;MFC-7840W&amp;quot;,131,4&#xA;    &#xA;&#xA;&#xA;0x0218,17,1,&amp;quot;DCP-8080DN&amp;quot;,133,4&#xA;0x021f,117,1,&amp;quot;DCP-8085DN&amp;quot;,133,4&#xA;&#xA;&#xA;0x0217,17,1,&amp;quot;MFC-8480DN&amp;quot;,133,4&#xA;&#xA;0x0215,117,1,&amp;quot;MFC-8890DW&amp;quot;,133,4&#xA;&#xA;&#xA;&#xA;&#xA;&#xA;[ModelTypeName]&#xA;1=MFC Scanner&#xA;2=DCP Scanner&#xA;&#xA;[Driver]&#xA;scanfast24=0&#xA;NoUseCM=0&#xA;compression=1&#xA;Inqueue=32000&#xA;LogFile=0&#xA;xshift_c=0&#xA;&#xA;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/models3/ext2.ini:&#xA;[Support Model]&#xA;&#xA;0x23e,14,2,&amp;quot;DCP-197C&amp;quot;&#xA;0x235,14,2,&amp;quot;DCP-377CW&amp;quot;&#xA;0x23a,14,1,&amp;quot;MFC-257CW&amp;quot;&#xA;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/models3/ext1.ini:&#xA;[Support Model]&#xA;&#xA;0x0222,14,2,&amp;quot;DCP-195C&amp;quot;&#xA;&#xA;0x0223,14,2,&amp;quot;DCP-365CN&amp;quot;&#xA;0x0224,14,2,&amp;quot;DCP-375CW&amp;quot;&#xA;0x0225,14,2,&amp;quot;DCP-395CN&amp;quot;&#xA;&#xA;0x0229,13,1,&amp;quot;MFC-295CN&amp;quot;&#xA;0x022a,13,1,&amp;quot;MFC-495CW&amp;quot;&#xA;0x022c,13,1,&amp;quot;MFC-795CW&amp;quot;&#xA;0x0228,14,1,&amp;quot;MFC-255CW&amp;quot;&#xA;0x0236,14,2,&amp;quot;DCP-390CN&amp;quot;&#xA;0x0227,13,2,&amp;quot;DCP-595CN&amp;quot;&#xA;0x022b,13,1,&amp;quot;MFC-495CN&amp;quot;&#xA;0x022d,14,1,&amp;quot;MFC-675CD&amp;quot;&#xA;0x022e,14,1,&amp;quot;MFC-695CDN&amp;quot;&#xA;0x022f,14,1,&amp;quot;MFC-735CD&amp;quot;&#xA;0x0230,13,1,&amp;quot;MFC-935CDN&amp;quot;&#xA;&#xA;0x021b,17,2,&amp;quot;DCP-8070D&amp;quot;,133,4&#xA;0x021a,17,1,&amp;quot;MFC-8370DN&amp;quot;,133,4&#xA;0x0219,117,1,&amp;quot;MFC-8380DN&amp;quot;,133,4&#xA;0x023f,117,1,&amp;quot;MFC-8680DN&amp;quot;,133,4&#xA;&#xA;0x0216,117,1,&amp;quot;MFC-8880DN&amp;quot;,133,4&#xA;&#xA;&#xA;0x021d,17,1,&amp;quot;MFC-9120CN&amp;quot;&#xA;0x021c,17,1,&amp;quot;MFC-9320CW&amp;quot;&#xA;0x0220,17,1,&amp;quot;MFC-9010CN&amp;quot;&#xA;0x021e,17,2,&amp;quot;DCP-9010CN&amp;quot;&#xA;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/models3/ext5.ini:&#xA;[Support Model]&#xA;&#xA;0x0258,13,2,&amp;quot;DCP-J715N&amp;quot;&#xA;0x025e,13,1,&amp;quot;MFC-J615N&amp;quot;&#xA;0x0256,14,2,&amp;quot;DCP-J515N&amp;quot;&#xA;&#xA;&#xA;0x240,13,1,&amp;quot;MFC-J950DN&amp;quot;&#xA;0x25f,14,1,&amp;quot;MFC-J700D&amp;quot;&#xA;0x260,14,1,&amp;quot;MFC-J800D&amp;quot;&#xA;0x261,14,1,&amp;quot;MFC-J850DN&amp;quot;&#xA;&#xA;0x0278,13,1,&amp;quot;MFC-J410W&amp;quot;&#xA;0x026f,14,1,&amp;quot;MFC-J270W&amp;quot;&#xA;0x026e,14,1,&amp;quot;MFC-J855DN&amp;quot;&#xA;0x026d,14,1,&amp;quot;MFC-J805D&amp;quot;&#xA;&#xA;0x234,14,2,&amp;quot;DCP-373CW&amp;quot;&#xA;0x239,14,1,&amp;quot;MFC-253CW&amp;quot;&#xA;0x253,14,2,&amp;quot;DCP-J125&amp;quot;&#xA;0x255,14,2,&amp;quot;DCP-J515W&amp;quot;&#xA;0x259,14,1,&amp;quot;MFC-J220&amp;quot;&#xA;0x25a,13,1,&amp;quot;MFC-J410&amp;quot;&#xA;0x25c,13,1,&amp;quot;MFC-J415W&amp;quot;&#xA;&#xA;&#xA;0x0276,13,1,&amp;quot;MFC-5895CW&amp;quot;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/models3/ext3.ini:&#xA;[Support Model]&#xA;0x01c9,  17,2,&amp;quot;DCP-9040CN&amp;quot;,133,4&#xA;0x01ca,  17,1,&amp;quot;MFC-9440CN&amp;quot;,133,4&#xA;0x01cb, 117,2,&amp;quot;DCP-9045CDN&amp;quot;,133,4&#xA;0x01cc, 117,1,&amp;quot;MFC-9840CDW&amp;quot;,133,4&#xA;0x01ec, 117,1,&amp;quot;MFC-9640CW&amp;quot;,133,4&#xA;&#xA;0x020d ,17,1,&amp;quot;MFC-9450CDN&amp;quot;,133,4&#xA;0x020c ,17,2,&amp;quot;DCP-9042CDN&amp;quot;,133,4&#xA;&#xA;-----------------------------&#xA;/usr/local/Brother/sane/models3/ext4.ini:&#xA;[Support Model]&#xA;&#xA;0x0257,13,2,&amp;quot;DCP-J715W&amp;quot;&#xA;0x025d,13,1,&amp;quot;MFC-J615W&amp;quot;&#xA;&#xA;0x0254,14,2,&amp;quot;DCP-J315W&amp;quot;&#xA;0x025B,14,1,&amp;quot;MFC-J265W&amp;quot;&#xA;0x026B,13,1,&amp;quot;MFC-J630W&amp;quot;&#xA;-----------------------------&#xA;MODEL:&amp;quot;DCP-197C&amp;quot;,ID:0x4f9:0x23e,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-377CW&amp;quot;,ID:0x4f9:0x235,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-257CW&amp;quot;,ID:0x4f9:0x23a,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-195C&amp;quot;,ID:0x4f9:0x222,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-365CN&amp;quot;,ID:0x4f9:0x223,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-375CW&amp;quot;,ID:0x4f9:0x224,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-395CN&amp;quot;,ID:0x4f9:0x225,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-295CN&amp;quot;,ID:0x4f9:0x229,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-495CW&amp;quot;,ID:0x4f9:0x22a,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-795CW&amp;quot;,ID:0x4f9:0x22c,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-255CW&amp;quot;,ID:0x4f9:0x228,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-390CN&amp;quot;,ID:0x4f9:0x236,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-595CN&amp;quot;,ID:0x4f9:0x227,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-495CN&amp;quot;,ID:0x4f9:0x22b,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-675CD&amp;quot;,ID:0x4f9:0x22d,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-695CDN&amp;quot;,ID:0x4f9:0x22e,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-735CD&amp;quot;,ID:0x4f9:0x22f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-935CDN&amp;quot;,ID:0x4f9:0x230,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-8070D&amp;quot;,ID:0x4f9:0x21b,TYPE:17,2,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8370DN&amp;quot;,ID:0x4f9:0x21a,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8380DN&amp;quot;,ID:0x4f9:0x219,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8680DN&amp;quot;,ID:0x4f9:0x23f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8880DN&amp;quot;,ID:0x4f9:0x216,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-9120CN&amp;quot;,ID:0x4f9:0x21d,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-9320CW&amp;quot;,ID:0x4f9:0x21c,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-9010CN&amp;quot;,ID:0x4f9:0x220,TYPE:17,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-9010CN&amp;quot;,ID:0x4f9:0x21e,TYPE:17,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-J715N&amp;quot;,ID:0x4f9:0x258,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J615N&amp;quot;,ID:0x4f9:0x25e,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-J515N&amp;quot;,ID:0x4f9:0x256,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J950DN&amp;quot;,ID:0x4f9:0x240,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J700D&amp;quot;,ID:0x4f9:0x25f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J800D&amp;quot;,ID:0x4f9:0x260,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J850DN&amp;quot;,ID:0x4f9:0x261,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J410W&amp;quot;,ID:0x4f9:0x278,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J270W&amp;quot;,ID:0x4f9:0x26f,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J855DN&amp;quot;,ID:0x4f9:0x26e,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J805D&amp;quot;,ID:0x4f9:0x26d,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-373CW&amp;quot;,ID:0x4f9:0x234,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-253CW&amp;quot;,ID:0x4f9:0x239,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-J125&amp;quot;,ID:0x4f9:0x253,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-J515W&amp;quot;,ID:0x4f9:0x255,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J220&amp;quot;,ID:0x4f9:0x259,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J410&amp;quot;,ID:0x4f9:0x25a,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J415W&amp;quot;,ID:0x4f9:0x25c,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-5895CW&amp;quot;,ID:0x4f9:0x276,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-9040CN&amp;quot;,ID:0x4f9:0x1c9,TYPE:17,2,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-9440CN&amp;quot;,ID:0x4f9:0x1ca,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-9045CDN&amp;quot;,ID:0x4f9:0x1cb,TYPE:17,2,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-9840CDW&amp;quot;,ID:0x4f9:0x1cc,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-9640CW&amp;quot;,ID:0x4f9:0x1ec,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-9450CDN&amp;quot;,ID:0x4f9:0x20d,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-9042CDN&amp;quot;,ID:0x4f9:0x20c,TYPE:17,2,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-J715W&amp;quot;,ID:0x4f9:0x257,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J615W&amp;quot;,ID:0x4f9:0x25d,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-J315W&amp;quot;,ID:0x4f9:0x254,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J265W&amp;quot;,ID:0x4f9:0x25b,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-J630W&amp;quot;,ID:0x4f9:0x26b,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-145C&amp;quot;,ID:0x4f9:0x206,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-165C&amp;quot;,ID:0x4f9:0x204,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-185C&amp;quot;,ID:0x4f9:0x205,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-385C&amp;quot;,ID:0x4f9:0x201,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-585CW&amp;quot;,ID:0x4f9:0x200,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-535CN&amp;quot;,ID:0x4f9:0x1ff,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-250C&amp;quot;,ID:0x4f9:0x1fe,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-290C&amp;quot;,ID:0x4f9:0x1fd,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-490CW&amp;quot;,ID:0x4f9:0x1fb,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-490CN&amp;quot;,ID:0x4f9:0x1fa,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-790CW&amp;quot;,ID:0x4f9:0x1f9,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-990CW&amp;quot;,ID:0x4f9:0x1f8,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-670CD&amp;quot;,ID:0x4f9:0x1f7,TYPE:14,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-930CDN&amp;quot;,ID:0x4f9:0x1f6,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-5490CN&amp;quot;,ID:0x4f9:0x1f5,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-5890CN&amp;quot;,ID:0x4f9:0x1f4,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-6690CW&amp;quot;,ID:0x4f9:0x1f1,TYPE:13,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-6490CW&amp;quot;,ID:0x4f9:0x1f3,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-6490CN&amp;quot;,ID:0x4f9:0x1f2,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-6890CDW&amp;quot;,ID:0x4f9:0x1f0,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-6890CN&amp;quot;,ID:0x4f9:0x1ef,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-163C&amp;quot;,ID:0x4f9:0x207,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-167C&amp;quot;,ID:0x4f9:0x208,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-383C&amp;quot;,ID:0x4f9:0x203,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-387C&amp;quot;,ID:0x4f9:0x202,TYPE:14,2,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-297C&amp;quot;,ID:0x4f9:0x1fc,TYPE:13,1,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;MFC-7450&amp;quot;,ID:0x4f9:0x1ee,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-7840N&amp;quot;,ID:0x4f9:0x1ed,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-7320&amp;quot;,ID:0x4f9:0x1eb,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-7030&amp;quot;,ID:0x4f9:0x1ea,TYPE:2,2,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-7040&amp;quot;,ID:0x4f9:0x1e9,TYPE:1,2,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-7045N&amp;quot;,ID:0x4f9:0x1e8,TYPE:1,2,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-7340&amp;quot;,ID:0x4f9:0x1e7,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-7440N&amp;quot;,ID:0x4f9:0x1e6,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-7840W&amp;quot;,ID:0x4f9:0x1e5,TYPE:1,1,RE:0x83,WE:0x4 CM:,,&#xA;MODEL:,ID:0x4f9:0xffff,TYPE:35,65535,RE:0xffff,WE:0xffff CM:,,&#xA;MODEL:&amp;quot;DCP-8080DN&amp;quot;,ID:0x4f9:0x218,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;DCP-8085DN&amp;quot;,ID:0x4f9:0x21f,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8480DN&amp;quot;,ID:0x4f9:0x217,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;MODEL:&amp;quot;MFC-8890DW&amp;quot;,ID:0x4f9:0x215,TYPE:17,1,RE:0x85,WE:0x4 CM:,,&#xA;-----------------------------&#xA;  0 &amp;quot;DCP-197C&amp;quot;&#xA;  1 &amp;quot;DCP-377CW&amp;quot;&#xA;  2 &amp;quot;MFC-257CW&amp;quot;&#xA;  3 &amp;quot;DCP-195C&amp;quot;&#xA;  4 &amp;quot;DCP-365CN&amp;quot;&#xA;  5 &amp;quot;DCP-375CW&amp;quot;&#xA;  6 &amp;quot;DCP-395CN&amp;quot;&#xA;  7 &amp;quot;MFC-295CN&amp;quot;&#xA;  8 &amp;quot;MFC-495CW&amp;quot;&#xA;  9 &amp;quot;MFC-795CW&amp;quot;&#xA; 10 &amp;quot;MFC-255CW&amp;quot;&#xA; 11 &amp;quot;DCP-390CN&amp;quot;&#xA; 12 &amp;quot;DCP-595CN&amp;quot;&#xA; 13 &amp;quot;MFC-495CN&amp;quot;&#xA; 14 &amp;quot;MFC-675CD&amp;quot;&#xA; 15 &amp;quot;MFC-695CDN&amp;quot;&#xA; 16 &amp;quot;MFC-735CD&amp;quot;&#xA; 17 &amp;quot;MFC-935CDN&amp;quot;&#xA; 18 &amp;quot;DCP-8070D&amp;quot;&#xA; 19 &amp;quot;MFC-8370DN&amp;quot;&#xA; 20 &amp;quot;MFC-8380DN&amp;quot;&#xA; 21 &amp;quot;MFC-8680DN&amp;quot;&#xA; 22 &amp;quot;MFC-8880DN&amp;quot;&#xA; 23 &amp;quot;MFC-9120CN&amp;quot;&#xA; 24 &amp;quot;MFC-9320CW&amp;quot;&#xA; 25 &amp;quot;MFC-9010CN&amp;quot;&#xA; 26 &amp;quot;DCP-9010CN&amp;quot;&#xA; 27 &amp;quot;DCP-J715N&amp;quot;&#xA; 28 &amp;quot;MFC-J615N&amp;quot;&#xA; 29 &amp;quot;DCP-J515N&amp;quot;&#xA; 30 &amp;quot;MFC-J950DN&amp;quot;&#xA; 31 &amp;quot;MFC-J700D&amp;quot;&#xA; 32 &amp;quot;MFC-J800D&amp;quot;&#xA; 33 &amp;quot;MFC-J850DN&amp;quot;&#xA; 34 &amp;quot;MFC-J410W&amp;quot;&#xA; 35 &amp;quot;MFC-J270W&amp;quot;&#xA; 36 &amp;quot;MFC-J855DN&amp;quot;&#xA; 37 &amp;quot;MFC-J805D&amp;quot;&#xA; 38 &amp;quot;DCP-373CW&amp;quot;&#xA; 39 &amp;quot;MFC-253CW&amp;quot;&#xA; 40 &amp;quot;DCP-J125&amp;quot;&#xA; 41 &amp;quot;DCP-J515W&amp;quot;&#xA; 42 &amp;quot;MFC-J220&amp;quot;&#xA; 43 &amp;quot;MFC-J410&amp;quot;&#xA; 44 &amp;quot;MFC-J415W&amp;quot;&#xA; 45 &amp;quot;MFC-5895CW&amp;quot;&#xA; 46 &amp;quot;DCP-9040CN&amp;quot;&#xA; 47 &amp;quot;MFC-9440CN&amp;quot;&#xA; 48 &amp;quot;DCP-9045CDN&amp;quot;&#xA; 49 &amp;quot;MFC-9840CDW&amp;quot;&#xA; 50 &amp;quot;MFC-9640CW&amp;quot;&#xA; 51 &amp;quot;MFC-9450CDN&amp;quot;&#xA; 52 &amp;quot;DCP-9042CDN&amp;quot;&#xA; 53 &amp;quot;DCP-J715W&amp;quot;&#xA; 54 &amp;quot;MFC-J615W&amp;quot;&#xA; 55 &amp;quot;DCP-J315W&amp;quot;&#xA; 56 &amp;quot;MFC-J265W&amp;quot;&#xA; 57 &amp;quot;MFC-J630W&amp;quot;&#xA; 58 &amp;quot;DCP-145C&amp;quot;&#xA; 59 &amp;quot;DCP-165C&amp;quot;&#xA; 60 &amp;quot;DCP-185C&amp;quot;&#xA; 61 &amp;quot;DCP-385C&amp;quot;&#xA; 62 &amp;quot;DCP-585CW&amp;quot;&#xA; 63 &amp;quot;DCP-535CN&amp;quot;&#xA; 64 &amp;quot;MFC-250C&amp;quot;&#xA; 65 &amp;quot;MFC-290C&amp;quot;&#xA; 66 &amp;quot;MFC-490CW&amp;quot;&#xA; 67 &amp;quot;MFC-490CN&amp;quot;&#xA; 68 &amp;quot;MFC-790CW&amp;quot;&#xA; 69 &amp;quot;MFC-990CW&amp;quot;&#xA; 70 &amp;quot;MFC-670CD&amp;quot;&#xA; 71 &amp;quot;MFC-930CDN&amp;quot;&#xA; 72 &amp;quot;MFC-5490CN&amp;quot;&#xA; 73 &amp;quot;MFC-5890CN&amp;quot;&#xA; 74 &amp;quot;DCP-6690CW&amp;quot;&#xA; 75 &amp;quot;MFC-6490CW&amp;quot;&#xA; 76 &amp;quot;MFC-6490CN&amp;quot;&#xA; 77 &amp;quot;MFC-6890CDW&amp;quot;&#xA; 78 &amp;quot;MFC-6890CN&amp;quot;&#xA; 79 &amp;quot;DCP-163C&amp;quot;&#xA; 80 &amp;quot;DCP-167C&amp;quot;&#xA; 81 &amp;quot;DCP-383C&amp;quot;&#xA; 82 &amp;quot;DCP-387C&amp;quot;&#xA; 83 &amp;quot;MFC-297C&amp;quot;&#xA; 84 &amp;quot;MFC-7450&amp;quot;&#xA; 85 &amp;quot;MFC-7840N&amp;quot;&#xA; 86 &amp;quot;MFC-7320&amp;quot;&#xA; 87 &amp;quot;DCP-7030&amp;quot;&#xA; 88 &amp;quot;DCP-7040&amp;quot;&#xA; 89 &amp;quot;DCP-7045N&amp;quot;&#xA; 90 &amp;quot;MFC-7340&amp;quot;&#xA; 91 &amp;quot;MFC-7440N&amp;quot;&#xA; 92 &amp;quot;MFC-7840W&amp;quot;&#xA; 93 &#xA; 94 &amp;quot;DCP-8080DN&amp;quot;&#xA; 95 &amp;quot;DCP-8085DN&amp;quot;&#xA; 96 &amp;quot;MFC-8480DN&amp;quot;&#xA; 97 &amp;quot;MFC-8890DW&amp;quot;&#xA;&#xA;Devices on network&#xA;ping&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Lastly, doing a&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ scanimage -L&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Results to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;No scanners were identified. If you were expecting something different,&#xA;check that the scanner is plugged in, turned on and detected by the&#xA;sane-find-scanner tool (if appropriate). Please read the documentation&#xA;which came with this software (README, FAQ, manpages).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23586" LastActivityDate="2023-12-12T03:10:16.273" Title="Can't detect scanner Brother DCP-195C" Tags="|release-hera|software-installation|hardware|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25368" PostTypeId="2" ParentId="25367" CreationDate="2020-07-29T18:37:40.097" Score="0" Body="&lt;p&gt;Might not be helpful but have you seen &lt;a href=&quot;https://support.brother.com/g/b/downloadlist.aspx?c=eu_ot&amp;amp;lang=en&amp;amp;prod=dcp195c_all&amp;amp;os=128&quot; rel=&quot;nofollow noreferrer&quot;&gt;this support page&lt;/a&gt; from Brother? It purports to have Linux drivers.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-29T18:37:40.097" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25371" PostTypeId="1" CreationDate="2020-07-30T02:58:24.723" Score="0" ViewCount="303" Body="&lt;p&gt;I'm coming to Elementary from Zorin. In Zorin, I was able to put all my fonts in a .fonts folder in the home directory. However, that doesn't seem to work in Elementary. Any advice here?&lt;/p&gt;&#xA;" OwnerUserId="23588" LastActivityDate="2020-07-30T20:40:58.090" Title="Installing fonts in Elementary" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25372" PostTypeId="1" AcceptedAnswerId="25374" CreationDate="2020-07-30T03:23:52.387" Score="0" ViewCount="109" Body="&lt;p&gt;I have been trying numerous Linux Distros over the past few weeks. Unfortunately they all have had trouble with Bluetooth connectivity between my Dell laptop and mouse and audio devices. The devices connect but some time later they disconnect. Reconntion becomes a huge ordeal with reboots and manual reconnects. I would like to try Elementary OS but I don't want to buy it if it has the same Bluetooth issues. Is there a way to get it on a trial basis?&lt;/p&gt;&#xA;" OwnerUserId="23589" LastActivityDate="2020-07-30T14:02:23.963" Title="Try Before Buy?" Tags="|bluetooth|" AnswerCount="1" CommentCount="1" ClosedDate="2020-08-08T23:06:09.213" ContentLicense="CC BY-SA 4.0" />
  <row Id="25374" PostTypeId="2" ParentId="25372" CreationDate="2020-07-30T14:02:23.963" Score="0" Body="&lt;p&gt;This may be impolitic but I'm going to give you a straight answer because honesty is what we should be striving for IMO.&lt;/p&gt;&#xA;&lt;p&gt;Bluetooth support in Linux is twitchy no matter which distribution you run.&lt;/p&gt;&#xA;&lt;p&gt;I've found that on Ubuntu and elementary installing &amp;quot;Bluetooth Manager&amp;quot; can be helpful, but honestly I find every distro I've tried to be fairly inconsistent when connecting and disconnecting multiple BT devices.&lt;/p&gt;&#xA;&lt;p&gt;It DOES work though. I regularly use a pair of BT Bose headphones as well as a nice Harman Kardon speaker set to Elementary via BT and it works great. You just have to be willing to fiddle with it a bit, sometimes things like removing/forgetting the device and re-pairing before re-connecting.&lt;/p&gt;&#xA;&lt;p&gt;Also in the realm of honesty, it's not all sunshine and roses in Bluetooth land on Windows either, and I've seen the same kind of twitchiness there.&lt;/p&gt;&#xA;&lt;p&gt;Apple seems to have the most solid BT support, probably because their BT stack is more mature as they shipped BT devices before anybody else.&lt;/p&gt;&#xA;&lt;p&gt;Good luck and I hope you find an operating system you enjoy working with.&lt;/p&gt;&#xA;" OwnerUserId="22486" LastActivityDate="2020-07-30T14:02:23.963" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25375" PostTypeId="1" AcceptedAnswerId="25376" CreationDate="2020-07-30T16:38:41.143" Score="0" ViewCount="199" Body="&lt;p&gt;I cannot for the life of me figure out how to append the headers to my get request.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    var session = new Soup.Session ();&#xA;    &#xA;    var msg = new Soup.Message (&#xA;      &amp;quot;GET&amp;quot;, &#xA;      &amp;quot;some-api-key&amp;quot;&#xA;    );&#xA;&#xA;    session.send_message (msg);&#xA;&#xA;    print (&amp;quot;Message: %s&amp;quot;, (string) msg.response_body.data);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I can't find any examples for how to do this. It's a miracle I made it this far.&lt;/p&gt;&#xA;" OwnerUserId="23579" LastActivityDate="2020-07-30T17:46:48.753" Title="How to send message headers with libsoup in Vala?" Tags="|networking|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25376" PostTypeId="2" ParentId="25375" CreationDate="2020-07-30T17:46:48.753" Score="0" Body="&lt;p&gt;msg.request_headers.append (&amp;quot;Content-Type&amp;quot;, &amp;quot;application/json&amp;quot;);&lt;/p&gt;&#xA;" OwnerUserId="23579" LastActivityDate="2020-07-30T17:46:48.753" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25378" PostTypeId="2" ParentId="25371" CreationDate="2020-07-30T20:40:58.090" Score="2" Body="&lt;p&gt;You have to install them. Check if Gnome Fonts are installed (normally is), then just click on font file and it will install.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-07-30T20:40:58.090" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25380" PostTypeId="1" CreationDate="2020-07-31T07:45:26.183" Score="0" ViewCount="201" Body="&lt;p&gt;i have been using it for 3 days after a fresh install and now the colors of my display is oversaturated blue is more purple and orange is more red.&#xA;It was quite good and similar to what i use to see in windows when i first installed it.&#xA;i use a external monitor with my laptop both the display is lodpi 1600x900 monitor ,1366x768 laptop display&lt;/p&gt;&#xA;" OwnerUserId="23599" LastActivityDate="2024-01-11T18:08:01.030" Title="Display colors gets bad after some time of using it" Tags="|display|color|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25381" PostTypeId="2" ParentId="25380" CreationDate="2020-07-31T07:53:13.487" Score="0" Body="&lt;p&gt;Is the issue on both the laptop screen as well as the external monitor?&lt;/p&gt;&#xA;&lt;p&gt;Have you tried removing the external monitor from the laptop and reboot? is the issue still there?&lt;/p&gt;&#xA;&lt;p&gt;If you boot up from a live USB does the issue persist?&lt;/p&gt;&#xA;&lt;p&gt;I ask because i want to see if we can work out if its a hardware issue or something with the OS installation.&lt;/p&gt;&#xA;" OwnerUserId="19666" LastActivityDate="2020-07-31T07:53:13.487" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25387" PostTypeId="2" ParentId="16069" CreationDate="2020-07-31T14:27:13.883" Score="0" Body="&lt;p&gt;I have tried to use Epiphany as my default browser but it is impossible with many pages. I always go back to Firefox or Chrome. I would like Epiphany to perform better as it feels more in line with the design parameters of ElementaryOS.&lt;/p&gt;&#xA;" OwnerUserId="23409" LastActivityDate="2020-07-31T14:27:13.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25390" PostTypeId="1" CreationDate="2020-07-31T20:10:07.087" Score="0" ViewCount="119" Body="&lt;p&gt;In the last few days, I've been having major problems with a system that had been running fine for quite a while (got it on July 1st). The system keeps rebooting every time it is idle, I believe it is when trying to go into sleep mode (which I have tried to disable but I have not succeeded).&lt;/p&gt;&#xA;&lt;p&gt;One important info is that if I log from the command line (Ctlr-Alt-F2), it will not reboot. I believe this is linked to the GUI. I could no see anything sending a reboot signal in the logs or using systemctl.&lt;/p&gt;&#xA;&lt;p&gt;You will see below that the behaviour started following the update of the kernel from 5.4.0-42-generic to 5.3.0-62-generic (July 29th, see report below).&lt;/p&gt;&#xA;&lt;p&gt;Here's some info on the system :&lt;/p&gt;&#xA;&lt;p&gt;&lt;b&gt;Computer&lt;/b&gt;&lt;br/&gt;&#xA;Lenovo ThinkCentre M630e Mini PC, Intel Core i5-8265U Upto 3.9GHz, 16GB RAM, 1TB NVMe SSD,Intel UHD Graphics 630.&lt;/p&gt;&#xA;&lt;p&gt;&lt;b&gt;Version&lt;/b&gt;&lt;br/&gt;&#xA;Kernel      : Linux 5.4.0-42-generic (x86_64)&lt;br/&gt;&#xA;Version     : #46~18.04.1-Ubuntu SMP Fri Jul 10 07:21:24 UTC 2020&lt;br/&gt;&#xA;C Library       : GNU C Library / (Ubuntu GLIBC 2.27-3ubuntu1.2) 2.27&lt;br/&gt;&#xA;Distribution        : elementary OS 5.1.6 Hera&lt;/p&gt;&#xA;&lt;p&gt;&lt;b&gt;Kernel change and reboots&lt;/b&gt;&lt;br/&gt;&#xA;Fri Jul 31 11:06    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 10:53    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 10:41    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 10:28    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 10:16    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 10:04    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 08:35    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 08:22    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 08:10    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 07:57    5.4.0-42-generic&lt;br/&gt;&#xA;Fri Jul 31 05:15    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 17:27    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 17:06    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 16:53    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 16:40    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 16:22    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 15:45    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 15:02    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 14:31    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 13:56    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 13:34    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 12:06    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 11:56    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 11:41    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 08:39    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 08:34    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 08:13    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 08:00    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 04:03    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 30 03:35    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 17:51    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 17:39    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 17:09    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 16:55    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 16:43    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 16:30    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 16:18    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 16:06    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 15:53    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 15:41    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 15:28    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 15:16    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 15:04    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 14:51    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 14:39    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 14:26    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 14:14    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 14:02    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 13:49    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 13:37    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 13:24    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 12:40    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 12:27    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 12:15    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 09:25    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 09:23    5.4.0-42-generic&lt;br/&gt;&#xA;Wed Jul 29 09:21    5.4.0-42-generic&lt;br/&gt;&#xA;Thu Jul 23 10:37    5.3.0-62-generic&lt;br/&gt;&#xA;Thu Jul 16 08:52    5.3.0-62-generic&lt;br/&gt;&#xA;Mon Jul 6 15:43 5.3.0-62-generic&lt;br/&gt;&#xA;Thu Jul 2 18:27 5.3.0-62-generic&lt;br/&gt;&#xA;Thu Jul 2 06:17 5.3.0-62-generic&lt;br/&gt;&#xA;Wed Jul 1 07:28 5.3.0-61-generic&lt;br/&gt;&#xA;Wed Jul 1 07:24 5.3.0-61-generic&lt;br/&gt;&#xA;Wed Jul 1 05:00 5.3.0-61-generic&lt;br/&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions will be more than appreciated, this is driving me nuts.&#xA;In the meantime, is there a way to roll back the update?&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&#xA;Patrick&lt;/p&gt;&#xA;" OwnerUserId="23608" LastEditorUserId="23608" LastEditDate="2020-08-01T16:48:42.380" LastActivityDate="2020-08-01T16:48:42.380" Title="System keeps rebooting since last kernel update" Tags="|release-hera|updates|pantheon|kernel|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25391" PostTypeId="1" AcceptedAnswerId="25396" CreationDate="2020-08-01T06:59:11.480" Score="0" ViewCount="170" Body="&lt;p&gt;I was trying to get install the Inter Font in Elementary OS. In the process, in order to get access to the fonts folder in usr/share, I used this command in the terminal,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 700 -R /usr/share/fonts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now the fonts folder is broken and as a result, all the system fonts are displayed as rectangles. Luckily, I recognized Firefox from its icon, and now I'm using it to ask this question. I used that command to unlock the usr/share/backgrounds folder by following this tutorial &lt;a href=&quot;https://askubuntu.com/a/263566&quot;&gt;https://askubuntu.com/a/263566&lt;/a&gt;, it worked for the backgrounds folder.&#xA;The problem is that, I don't remember if I used 777 instead of 700 for the backgrounds folder.&lt;/p&gt;&#xA;&lt;p&gt;Please help me to fix the fonts folder as it has made my only PC practically unusable.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-08-01T15:44:04.943" Title="I messed up with usr/share/fonts, please help" Tags="|pantheon-files|system|files|fonts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25393" PostTypeId="1" CreationDate="2020-08-01T11:12:05.333" Score="0" ViewCount="182" Body="&lt;p&gt;Files has no way to search with in a directory while Nautilus does.&#xA;How to I replace Files with Nautilus?&lt;/p&gt;&#xA;" OwnerUserId="22965" LastActivityDate="2020-09-25T06:23:10.293" Title="Hera: Replace files with Nautilus" Tags="|pantheon-files|nautilus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25394" PostTypeId="1" CreationDate="2020-08-01T11:49:37.443" Score="2" ViewCount="1399" Body="&lt;p&gt;So I have WSL-2 configured fully. Is there any way I can run elementary OS the same way Ubuntu runs on WSL? I don't want to use a VM nor the dual boot option so this looks like the only viable alternative.&#xA;Thanks for the help in advance!&lt;/p&gt;&#xA;" OwnerUserId="23614" LastActivityDate="2024-02-25T12:05:15.660" Title="Looking to install elementary os on WSL-2" Tags="|release-hera|software-installation|dual-boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25395" PostTypeId="2" ParentId="25393" CreationDate="2020-08-01T14:42:36.860" Score="2" Body="&lt;p&gt;Files does have a search facility - you just start typing or press &lt;code&gt;&amp;lt;Ctrl&amp;gt;F&lt;/code&gt; and type into the pathbar (which doubles as search entry).  The first results returned are those found in the current directory.  It also returns (grouped separately) results found in subfolders of the current folder, in bookmarks and in recently used.&lt;/p&gt;&#xA;&lt;p&gt;However, if you wish you can install Nautilus from the AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-08-01T14:42:36.860" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25396" PostTypeId="2" ParentId="25391" CreationDate="2020-08-01T15:44:04.943" Score="0" Body="&lt;p&gt;Run these commands in a terminal will reverse the permission changes:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;cd /usr/share/fonts&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo find -type d -name '*' -exec chmod 755 {} \;&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo find -type f -name '*' -exec chmod 644 {} \;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;The first command makes sure you are in the right folder.&lt;br /&gt;&#xA;The second command changes the permissions of all the folders.&lt;br /&gt;&#xA;The third command changes the permissions of all the files.&lt;/p&gt;&#xA;&lt;p&gt;I strongly suggest you backup the &lt;code&gt;usr/share/fonts&lt;/code&gt; folder to safe place before attempting to changes it. I also strongly suggest you first run the second two commands without the &lt;code&gt;-exec .....&lt;/code&gt; part.  It will then just list the regular files that will be changed to the terminal and you can double check it is going to change the right ones.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-08-01T15:44:04.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25397" PostTypeId="1" CreationDate="2020-08-01T21:39:01.970" Score="0" ViewCount="41" Body="&lt;p&gt;does vanilla EOS 5.1 support internet using a USB Ethernet Dongle?&lt;/p&gt;&#xA;&lt;p&gt;Background: Chuwi Herobook 14.1 laptop. Need to install RealTek 8821CE driver for wifi to work. Need internet to install. No ethernet port!!&lt;/p&gt;&#xA;&lt;p&gt;Hence the question.&lt;/p&gt;&#xA;&lt;p&gt;(If the answer is you have to first apt install  before it will work, then I need more instructions because I have no wifi, no net to start with)&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&lt;p&gt;(Is there a better way to solve my problem?)&lt;/p&gt;&#xA;" OwnerUserId="23617" LastActivityDate="2021-01-02T22:03:50.387" Title="Does Vanilla EOS 5.1 Support USB Ethernet Dongle" Tags="|ethernet|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25398" PostTypeId="1" CreationDate="2020-08-03T11:08:52.603" Score="1" ViewCount="34" Body="&lt;p&gt;I'm using:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a 2013 27&amp;quot; iMac + secondary monitor&lt;/li&gt;&#xA;&lt;li&gt;elementary OS 5.1.6 Hera&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;When resuming from suspend, the brightness of the main screen is at maximum rather than my custom setting. The brightness control widget indicates the custom setting (not maximum), and any adjustment using that or the keyboard controls will restore it to the correct custom setting.&lt;/p&gt;&#xA;&lt;p&gt;Any suggests as to the cause?&lt;/p&gt;&#xA;" OwnerUserId="23623" LastEditorUserId="15904" LastEditDate="2020-08-05T15:32:38.993" LastActivityDate="2020-08-05T15:32:38.993" Title="Retain screen brightness settings after resuming from suspend" Tags="|release-hera|suspend|brightness|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25403" PostTypeId="1" CreationDate="2020-08-03T23:29:33.737" Score="0" ViewCount="32" Body="&lt;p&gt;How can I get Elementary OS to open first when turning on the computer using a dual boot with Windoz 10?&lt;/p&gt;&#xA;&lt;p&gt;Yesterday I used a USB Live version of Elementary and loaded it into the computer.&#xA;The computer is an Acer Aspire One laptop. It is about two years old. I used Rufus to create the USB drive. It selected the Elementary OS from a different external hard drive. Not the internal HDD. The sha256 was verified to be correct.&lt;/p&gt;&#xA;&lt;p&gt;To boot the USB drive with Elementary the laptop was started and F2 was pressed. That didn't work. The USB wasn't listed. Only two Windoz names were in the list. I used the BIOS to switch the order of those two Windoz items. When the machine was restarted all that was displayed were large white letters on a black screen. I didn't know what that was so I restarted and switched them back to the way they were.&lt;/p&gt;&#xA;&lt;p&gt;I restarted and pressed F12. That gave me the choice of the thumb drive with Elementary. Elementary was selected and Enter was pressed. Elementary opened and the try Elementary was seen with a countdown. The trackpad didn't work during this time. No cursor was seen. The OS opened and it was tried.&lt;/p&gt;&#xA;&lt;p&gt;Then the install Elementary button was selected and the process was begun.&lt;/p&gt;&#xA;&lt;p&gt;The choice to dual boot was selected. When the time to resize the partitions for Windoz and Elementary came, the bar was slid to have 68 GB for Windoz and 930 GB for Elementary. The process was continued until it finished.&lt;/p&gt;&#xA;&lt;p&gt;When the computer was restarted Windoz opened. I don't want that. I want Elementary to open.&lt;/p&gt;&#xA;&lt;p&gt;The machine was restarted and F2 was pressed. When I got to the BIOS Elementary wasn't listed. Just those two Windoz lines were there. I let Windoz open during one of my many restarts and decided to look at the drive space. I allocated 68 GB for Windoz and the partition was only 13 GB. That is waaaay different than 68 GB. That is a problem that needs to be fixed.&lt;/p&gt;&#xA;&lt;p&gt;So here are the problems that I want to fix. I want Elementary to open when I press the power button. I don't want to need to press F12 every time the computer is turned on to get to Elementary. How do I do that? Let me say this, when pressing F12 the computer password is required. After it is entered the choices of Windoz and Elementary are seen; but there is no way to swap them on this screen. The only thing that is allowed is to select the drive. Pressing F6 in this window will not switch their order.&lt;/p&gt;&#xA;&lt;p&gt;Secondarily how do I fix the drive allocation to be what I want it to be? I want Windoz to have 68 GB storage. Not 13 GB. I understood that Windoz might need some other space for swap or backup, but taking up 55 GB seems crazy. How do I enlarge that Windoz partition to be as big as I want it to be?&lt;/p&gt;&#xA;&lt;p&gt;Here is what I will be doing. I will be reformatting the entire drive and putting Windoz 10 back on the drive and starting from the beginning. I need instructions to tell me how to load Elementary from the USB drive so that when I turn on the computer by pressing the power button Elementary will open first. I can press F12 to get to Windoz 10 when needed. Maybe I made a mistake using Rufus and that is the source of the problem. I don't know.&lt;/p&gt;&#xA;&lt;p&gt;Secondly how should I move that slider to allow Windoz some space so that it actually has at least 60 GB usable drive space and not end up with just 13 GB or such a ridiculous number?&lt;/p&gt;&#xA;&lt;p&gt;If you feel that I can accomplish this without having to start over please instruct me how to do it.&lt;/p&gt;&#xA;&lt;p&gt;I used Elementary from 2012-2014 and liked it. It opened and closed much faster than Vista and Ubuntu. I tried it again in 2018 but it was very slow to open and close. It wasn't as fast as before. So I didn't keep it. I chose Ubuntu Budgie. Budgie got buggy in the last few months. Now I'm trying Elementary again. I hope it works out this time. It is a little faster than before but not as snappy as in 2014.&lt;/p&gt;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;" OwnerUserId="23630" LastActivityDate="2020-08-03T23:29:33.737" Title="How Can I Get Elementary To Open First Using A Dual Boot With Windoz 10?" Tags="|boot|dual-boot|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25404" PostTypeId="2" ParentId="12548" CreationDate="2020-08-04T05:38:35.767" Score="0" Body="&lt;p&gt;marcussacana solution from &lt;a href=&quot;https://github.com/mdh34/elementary-indicators/issues/1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mdh34/elementary-indicators/issues/1&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Okay, I tried the community fork, and builded by myself, here is the &lt;a href=&quot;https://github.com/eth-p/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;git&lt;/a&gt;, and if you don't want build:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the wingpanel indicator .deb &lt;a href=&quot;https://launchpad.net/%7Eelementary-os/+archive/ubuntu/stable/+files/wingpanel-indicator-ayatana_2.0.3+r27+pkg17%7Eubuntu0.4.1.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; (the same deb in&#xA;the link of this git)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Download&#xA;&lt;a href=&quot;https://github.com/mdh34/elementary-indicators/files/3776351/libayatana_compatibility.so.zip&quot; rel=&quot;nofollow noreferrer&quot;&gt;libayatana_compatibility.so.zip&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go To (with sudo)&#xA;/usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&lt;p&gt;cd /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Backup your&#xA;libayatana_compatibility.so&lt;/p&gt;&#xA;&lt;p&gt;sudo cp libayatana_compatibility.so libayatana_compatibility.so.copy&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Replace the&#xA;libayatana_compatibility.so with the zipped one&lt;/p&gt;&#xA;&lt;p&gt;cd ~&#xA;cd Downloads&#xA;sudo apt install unzip&#xA;unzip libayatana_compatibility.so.zip&#xA;sudo cp libayatana_compatibility.so /usr/lib/x86_64-linux-gnu/wingpanel/&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-08-04T05:38:35.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25406" PostTypeId="1" CreationDate="2020-08-04T17:44:00.797" Score="0" ViewCount="63" Body="&lt;p&gt;I downloaded it to a USB and used Rufus to make it an ISO. I put it in another computer and when I choose install, there are no options to download the OS, then it crashes and opens the tryal version.&lt;/p&gt;&#xA;" OwnerUserId="23633" LastActivityDate="2023-12-19T20:01:31.123" Title="I can't install it" Tags="|crash|install|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25408" PostTypeId="1" CreationDate="2020-08-05T07:49:34.897" Score="0" ViewCount="51" Body="&lt;p&gt;On my Date &amp;amp; Time settings I have it set to Network Time which usually works fine, but every time I change the network (when I move between work and home) the time gets shifted 2 hours forward. It gets fixed by just flipping the switch for Network Time on and off.&#xA;I've tried leaving Network Time off and the same thing happens.&lt;/p&gt;&#xA;&lt;p&gt;I'm not switching countries or timezone when I move, I'm always within Central European Time.&lt;/p&gt;&#xA;" OwnerUserId="23636" LastActivityDate="2023-12-20T06:09:31.147" Title="System time is shifted forward 2 hours everytime I change network" Tags="|release-hera|time|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25410" PostTypeId="1" CreationDate="2020-08-05T08:12:49.287" Score="1" ViewCount="547" Body="&lt;p&gt;I have a little web book that doesn't have great speakers. I came from Ubuntu where there was a nice setting to enable over amplification. I've tried Gnome Tweaks, but couldn't find anything. Is there a way to do this on elementary?&lt;/p&gt;&#xA;" OwnerUserId="23638" LastActivityDate="2024-01-24T07:01:30.227" Title="Enable Over-Amplification" Tags="|sound|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25412" PostTypeId="2" ParentId="25397" CreationDate="2020-08-05T19:49:25.500" Score="1" Body="&lt;p&gt;OK. I found a better way!  I don't need wifi dongle to get this to work.&lt;/p&gt;&#xA;&lt;p&gt;Recap of the real background issue:&lt;/p&gt;&#xA;&lt;p&gt;Chuwi Herobook 14.1 laptop. Need to install RealTek 8821CE driver for wifi to work. Need internet to install. No ethernet port!!&lt;/p&gt;&#xA;&lt;p&gt;Since I have dual boot Windows 10 and EOS, I can download the required driver and dependent packages in the Windows 10 OS.  Write them to a USB stick.  Then boot EOS and download the files from USB.  (I presume a shared partition will definite work... but I chose the easier route, easier for me)&lt;/p&gt;&#xA;&lt;p&gt;For others having the same problem... I saved the files in github:&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://github.com/bryanso/chuwi_eos_5.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bryanso/chuwi_eos_5.1&lt;/a&gt; if interested.&lt;/p&gt;&#xA;" OwnerUserId="23617" LastActivityDate="2020-08-05T19:49:25.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25413" PostTypeId="1" AcceptedAnswerId="25414" CreationDate="2020-08-05T20:22:35.970" Score="0" ViewCount="99" Body="&lt;p&gt;What package do I need to add to my project in order to use granite? All I get is &amp;quot;The name `Granite' does not exist in the context of...&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I tried libgranite-dev but it isn't found.&lt;/p&gt;&#xA;&lt;p&gt;Also, why is this information not clearly laid out somewhere? I've been struggling with the same thing on the math library as well.&lt;/p&gt;&#xA;" OwnerUserId="23579" LastActivityDate="2020-08-05T20:29:09.690" Title="How to add granite package" Tags="|development|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25414" PostTypeId="2" ParentId="25413" CreationDate="2020-08-05T20:29:09.690" Score="0" Body="&lt;p&gt;Alright so turns out it is just granite and that package names are listed in parenthesis on valadoc.org when you search for Granite(granite). I do wish it was more clear on the github page how to do this though. I only found it by looking at another project that was using it.&lt;/p&gt;&#xA;" OwnerUserId="23579" LastActivityDate="2020-08-05T20:29:09.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25416" PostTypeId="1" AcceptedAnswerId="25429" CreationDate="2020-08-06T02:11:46.753" Score="0" ViewCount="46" Body="&lt;p&gt;I was testing different apps/programs that could work with my printer/scanner. One of them was VueScan. It was the only app that worked but it isn't free so I uninstalled it. Why does it still appear on my updates? (photo below)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BThER.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BThER.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23586" LastActivityDate="2020-08-07T02:47:25.883" Title="I downloaded VueScan app and then uninstalled it, why is it appearing in my operating system update?" Tags="|updates|applications|appcenter|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25417" PostTypeId="1" CreationDate="2020-08-06T13:09:04.233" Score="0" ViewCount="681" Body="&lt;p&gt;I get that you made it small, clean, and simple. But why would you not include a disk utility already incorporated? Or am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="23643" LastActivityDate="2023-12-20T22:07:30.897" Title="No Disk Utility" Tags="|settings|disk-management|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25418" PostTypeId="1" CreationDate="2020-08-06T13:28:10.080" Score="0" ViewCount="185" Body="&lt;p&gt;the solution mentioned in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/38/configure-files-to-use-double-click&quot;&gt;Configure Files to use double click&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;GSettings (recommended)&#xA;Run the following command in terminal&#xA;gsettings set io.elementary.files.preferences single-click false&#xA;(To enable single-click again use true instead of false.)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;seems to be valid only for the current user. Is there a way to set double click behaviour as a system wide default (for all users)?&lt;/p&gt;&#xA;" OwnerUserId="23520" LastActivityDate="2023-12-20T10:07:05.950" Title="Double click default behaviour for all users?" Tags="|pantheon|mouse|click|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25419" PostTypeId="2" ParentId="25417" CreationDate="2020-08-06T14:05:56.683" Score="0" Body="&lt;p&gt;You are right. It is missing by default, you aren't missing anything. But why its is not added has to be answered by the team. I am just a user.&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-08-06T14:05:56.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25420" PostTypeId="2" ParentId="25417" CreationDate="2020-08-06T14:07:41.257" Score="0" Body="&lt;p&gt;I think you answered question yourself. It's simple, it's elementary, not everyone needs it out of the box.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-08-06T14:07:41.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25421" PostTypeId="2" ParentId="25418" CreationDate="2020-08-06T14:09:49.623" Score="0" Body="&lt;p&gt;You can install &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary Tweaks&lt;/a&gt; where you can change it and set permanent.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-08-06T14:09:49.623" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25422" PostTypeId="2" ParentId="25406" CreationDate="2020-08-06T14:14:56.353" Score="0" Body="&lt;p&gt;The question is not clear but I assume that you downloaded elementary OS and wrote a bootable USB using Rufus.&lt;/p&gt;&#xA;&lt;p&gt;In the process Rufus might have asked you two option to write in &lt;code&gt;iso&lt;/code&gt; or &lt;code&gt;dd&lt;/code&gt;.Use both and. Finally check the USB by ticking the check option in Rufus.&lt;/p&gt;&#xA;&lt;p&gt;I think the iso image might be corrupted due to incomplete download.&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-08-06T14:14:56.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25423" PostTypeId="2" ParentId="25408" CreationDate="2020-08-06T14:18:02.567" Score="0" Body="&lt;p&gt;In case if you are using dual boot. try this solution: &lt;a href=&quot;https://www.howtogeek.com/323390/how-to-fix-windows-and-linux-showing-different-times-when-dual-booting/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to Fix Windows and Linux Showing Different Times When Dual Bootin&lt;/a&gt;g&lt;/p&gt;&#xA;" OwnerUserId="23532" LastActivityDate="2020-08-06T14:18:02.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25424" PostTypeId="1" CreationDate="2020-08-06T15:38:36.917" Score="1" ViewCount="224" Body="&lt;p&gt;I have several applications, for example &amp;quot;Joe&amp;quot;, that litters entries in the Applications menu.  I cannot see how to customize this menu.  How does one remove entries without actually deleting shared resources in /usr/share/applications?  What is the OS method for customizing this menu?  I can see how to add applictions, but how does one move, or re-categorize existing ones?&lt;/p&gt;&#xA;" OwnerUserId="23634" LastActivityDate="2022-08-31T16:03:10.360" Title="Is there any way to organize or edit entries in the Applications menu?" Tags="|settings|applications|menu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25426" PostTypeId="1" CreationDate="2020-08-06T18:25:49.900" Score="0" ViewCount="123" Body="&lt;p&gt;I have installed Elementary OS 5.1.6 Hera, yesterday. I see all the wifi hosts but can't seems to connect with them. Passwords are alright. Ethernet connection seems to work fine.. need help.&lt;/p&gt;&#xA;" OwnerUserId="23644" LastEditorUserId="15904" LastEditDate="2020-09-05T12:01:00.907" LastActivityDate="2024-02-18T05:09:36.217" Title="Can't seem to connect with Wifi" Tags="|release-hera|wifi|drivers|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25428" PostTypeId="1" CreationDate="2020-08-07T01:32:40.883" Score="0" ViewCount="2054" Body="&lt;p&gt;I am fairly technical and use PopOS as my daily driver, but my kid's school system is going full time remote, and I'm gonna be that dad who makes him use a linux laptop if he's gonna be stuck looking at it all day for 6 months or more.  So I thought I'd buy a decent student notebook which seemed to be linux-compatible, and put eOS on it.  Might be a perfect fit!&lt;/p&gt;&#xA;&lt;p&gt;Computer is a Lenovo IdeaPad 5 15are05.  Ryzen 5 4500U, with integrated AMD graphics.&lt;/p&gt;&#xA;&lt;p&gt;However, I am having difficulty getting the OS installed.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I downloaded the USB ISO, flashed it to a drive, and verified everything with md5sum.&lt;/li&gt;&#xA;&lt;li&gt;I made sure the machine BIOS was fully up to date&lt;/li&gt;&#xA;&lt;li&gt;I disabled Secure Boot&lt;/li&gt;&#xA;&lt;li&gt;I booted the machine, used F12 to get to the boot menu, and chose the USB drive.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I get the &amp;quot;Try or Install elementary OS&amp;quot; screen.  Looks fine.  I hit &amp;quot;enter&amp;quot; to boot, but it just goes to a black screen and sits.&lt;/p&gt;&#xA;&lt;p&gt;I have tried a bunch of stuff.  Not too familiar with GRUB (as PopOS doesn't use it) but I thought that I could get debug kernel boot output by hitting &amp;quot;e&amp;quot; at that screen and switching &amp;quot;quiet splash&amp;quot; to &amp;quot;debug nosplash&amp;quot;, but no luck there.  Still just a black screen.&lt;/p&gt;&#xA;&lt;p&gt;Anything else to try?  Is it possible that the kernel in the boot image is too old to wrangle this processor?  Am I out of luck here?&lt;/p&gt;&#xA;&lt;p&gt;Things I've tried (will expand list as I try more things):&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Tried booting Arch Linux 2020.08.01 USB ISO without issue, which is based on the 5.7.11 kernel.  Perhaps it's indeed the eOS kernel.&lt;/li&gt;&#xA;&lt;li&gt;Tried &amp;quot;nomodeset&amp;quot; as a kernel arg, but still got a black screen.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Thanks for any pointers!&lt;/p&gt;&#xA;" OwnerUserId="23646" LastEditorUserId="23646" LastEditDate="2020-08-07T16:22:36.117" LastActivityDate="2024-01-05T22:07:50.923" Title="Install issue (black screen after grub splash) with elementaryos-5.1-stable.20200706 ISO" Tags="|system-installation|release-hera|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25429" PostTypeId="2" ParentId="25416" CreationDate="2020-08-07T02:47:25.883" Score="0" Body="&lt;p&gt;I ran a &lt;code&gt;$ flatpak uninstall --unused&lt;/code&gt; and got this response&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;        ID                                 Branch        Op&#xA; 1. [-] com.hamrick.VueScan.Locale         stable        r&#xA; 2. [-] org.gnome.Cheese.Locale            stable        r&#xA; 3. [-] org.gnome.Platform.Locale          3.34          r&#xA; 4. [-] org.kde.Platform                   5.14          r&#xA; 5. [-] org.kde.Platform.Locale            5.14          r&#xA; 6. [-] org.kde.kolourpaint.Locale         stable        r&#xA; 7. [-] org.mypaint.MyPaint.Locale         stable        r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;pressed &lt;code&gt;y&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;then &lt;code&gt;Uninstall complete.&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;AppCenter&lt;/code&gt; is no longer asking for updates with VueScan.&lt;/p&gt;&#xA;&lt;p&gt;Elementary OS dev team, please incorporate this in the AppCenter when uninstalling apps.&lt;/p&gt;&#xA;&lt;p&gt;Reference: &lt;a href=&quot;https://www.linuxuprising.com/2019/02/how-to-remove-unused-flatpak-runtimes.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxuprising.com/2019/02/how-to-remove-unused-flatpak-runtimes.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23586" LastActivityDate="2020-08-07T02:47:25.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25431" PostTypeId="2" ParentId="25271" CreationDate="2020-08-07T09:13:45.663" Score="1" Body="&lt;p&gt;Ok, have got fingerprint authentication working now in Hera 5.1, with the Thinkpad X1. Maybe others will be luckier than me, but following the instructions on &lt;a href=&quot;https://github.com/3v1n0/libfprint&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/3v1n0/libfprint&lt;/a&gt; did not work for me. I tried many variations, but always the same error with fingerprint-gui and fprint-demo: No Device Found.&lt;/p&gt;&#xA;&lt;p&gt;While this method works, it will not work with either of those GUI applications.&lt;/p&gt;&#xA;&lt;p&gt;Huge thanks to sysadmin here, @himekifee over on Gitter, and Marco Trevisan for his work on all this.&lt;/p&gt;&#xA;&lt;p&gt;Here are the steps to get things working.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install snap:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install snapd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install Validity tools and initialise the device:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo snap install validity-sensors-tools&#xA;sudo snap connect validity-sensors-tools:raw-usb&#xA;sudo snap connect validity-sensors-tools:hardware-observe&#xA;sudo validity-sensors-tools.initializer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Compile libfprint:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/3v1n0/libfprint&#xA;meson libfprint libfprint/_build &amp;amp;&amp;amp; sudo ninja -C libfprint/_build install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install libfprint&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install fprintd&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install fprintd from focal release 20.04: (the bionic version would not work)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo 'deb http://archive.ubuntu.com/ubuntu focal main restricted universe deb-src http://archive.ubuntu.com/ubuntu focal main restricted universe' | sudo tee /etc/apt/sources.list.d/ubuntu-focal.list&#xA;&#xA;echo 'APT::Default-Release &amp;quot;bionic&amp;quot;' | sudo tee /etc/apt/apt.conf.d/01ubuntu-bionic&#xA;&#xA;sudo apt-get install -y -t focal fprintd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Install PAM:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libpam0g-dev libpam-fprintd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Configure PAM:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo pam-auth-update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Include fingerprint reader as authentication option. Click ok.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Update symbolic link /usr/lib/libfprint.so.0 -&amp;gt; /usr/local/lib/libfprint.so.0.0.0 (to libfprint)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Allow fingerprint enrolling to user:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Create /lib/udev/rules.d/40-libfprint0-custom.rules as follows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ATTRS{idVendor}==&amp;quot;138a&amp;quot;, ATTRS{idProduct}==&amp;quot;0090&amp;quot;, MODE=&amp;quot;0664&amp;quot;, GROUP=&amp;quot;plugdev&amp;quot;&#xA;&#xA;**Add your $USER to plugdev group:**&#xA;&#xA;usermod -a -G plugdev $USER&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Enroll fingerprints:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;fprintd-enroll &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Verify fingerprint matching:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;fprintd-verify&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Add fingerprint authentication configuration for login:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Edit /etc/pam.d/common-auth for editing (sudo nano /etc/pam.d/common-auth).&lt;/p&gt;&#xA;&lt;p&gt;Add: first line&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;auth    [success=2 default=ignore]  pam_fprintd.so max_tries=1 timeout=10&#xA;auth    [success=1 default=ignore]  pam_unix.so nullok_secure&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Can also edit /etc/pam.d/sudo (include at the top):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;auth    sufficient  pam_unix.so try_first_pass likeauth nullok&#xA;auth    sufficient  pam_fprintd.so&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Good resources:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://wiki.archlinux.org/index.php/Fprint#Login_configuration&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Fprint#Login_configuration&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://launchpad.net/%7E3v1n0/+archive/ubuntu/libfprint-vfs0090&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/%7E3v1n0/+archive/ubuntu/libfprint-vfs0090&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/1049526/fingerprint-activation-on-ubuntu-18-04&quot;&gt;https://askubuntu.com/questions/1049526/fingerprint-activation-on-ubuntu-18-04&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://gitter.im/Validity90/Lobby&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitter.im/Validity90/Lobby&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="23504" LastEditorUserId="23504" LastEditDate="2020-08-07T23:37:41.440" LastActivityDate="2020-08-07T23:37:41.440" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25432" PostTypeId="1" CreationDate="2020-08-07T12:09:54.700" Score="0" ViewCount="493" Body="&lt;p&gt;where can I find my Ipv4 ip address, I tired all sorts of different commands I need help.(I am new)&lt;/p&gt;&#xA;" OwnerUserId="23650" LastActivityDate="2024-01-20T21:03:50.397" Title="How to find my ipv4 ip address" Tags="|release-juno|networking|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25433" PostTypeId="2" ParentId="25432" CreationDate="2020-08-07T15:00:50.903" Score="0" Body="&lt;p&gt;For Public IP address run this &lt;code&gt;curl bot.whatismyipaddress.com&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;For Private IP address run this &lt;code&gt;ifconfig -a&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23653" LastActivityDate="2020-08-07T15:00:50.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25434" PostTypeId="2" ParentId="25426" CreationDate="2020-08-07T15:05:10.157" Score="0" Body="&lt;p&gt;can you share some information about your router,is it dual band? Create a mobile hotspot and try connecting to it.&lt;/p&gt;&#xA;" OwnerUserId="23653" LastActivityDate="2020-08-07T15:05:10.157" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25435" PostTypeId="2" ParentId="25417" CreationDate="2020-08-07T15:24:03.860" Score="0" Body="&lt;p&gt;Just add Gnome Disks from the app center.  Done.&lt;/p&gt;&#xA;&lt;p&gt;It is an interesting question though.  Isn't GParted on the live disk?&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-08-07T15:24:03.860" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25438" PostTypeId="2" ParentId="25428" CreationDate="2020-08-07T22:21:51.973" Score="0" Body="&lt;p&gt;You can try this:&#xA;-On the GRUB screen press the &amp;quot;E&amp;quot; key on your keyboard, this will launch an editor.&lt;/p&gt;&#xA;&lt;p&gt;-In the editor, use the arrow keys to locate the end of the line that starts with &amp;quot;linux /boot/vmlinuz***&amp;quot; (each bootloader may say something slightly different).&lt;/p&gt;&#xA;&lt;p&gt;-Type &amp;quot;nomodeset&amp;quot; at the end of the line. You might end up with something like &amp;quot;quiet splash nomodeset&amp;quot; for that line. You can make sure is the end of the line by pressing the END key in the &amp;quot;linux /boot/vmlinuz***&amp;quot; line.&lt;/p&gt;&#xA;&lt;p&gt;And that's it, if it works update or install your video card drivers which is more likely causing this issue.&lt;/p&gt;&#xA;" OwnerUserId="23660" LastActivityDate="2020-08-07T22:21:51.973" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25439" PostTypeId="1" CreationDate="2020-08-08T01:14:11.000" Score="0" ViewCount="104" Body="&lt;p&gt;The installation was done from command line &lt;code&gt;sudo apt get-install anki&lt;/code&gt; and when tried to run through command line by just typing &lt;code&gt;anki&lt;/code&gt;, it showed the following&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Qt warning: QApplication: invalid style override 'adwaita' passed, ignoring it.&#xA;Available styles: Windows, Fusion &#xA;mpv too old for key rebinding&#xA;LaunchProcess: failed to execvp:&#xA;/usr/local/share/anki/bin/PyQt5/Qt/libexec/QtWebEngineProcess&#xA;Trace/breakpoint trap&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;PS. Running Elementary OS 5.1.6 Hera btw.&lt;/p&gt;&#xA;" OwnerUserId="23662" LastActivityDate="2024-02-22T05:02:15.243" Title="Anki won't start. When clicked on the icon it starts to show up on the dock but after a while it disappears and nothing happens" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25443" PostTypeId="1" CreationDate="2020-08-08T22:26:47.697" Score="1" ViewCount="382" Body="&lt;p&gt;I couldn't find R or Rstudio on the built-in Elementary app store thingie, so I'm following &lt;a href=&quot;https://cran.rstudio.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructions&lt;/a&gt; from the R project to install R in my new Elementary OS sandbox. &lt;code&gt;sudo apt-get install r-base-core&lt;/code&gt; gives a common type of error.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; r-base-core : Depends: libc6 (&amp;gt;= 2.29) but 2.27-3ubuntu1.2 is to be installed&#xA;               Depends: libicu63 (&amp;gt;= 63.1-1~) but it is not installable&#xA;               Depends: libreadline8 (&amp;gt;= 6.0) but it is not installable&#xA;               Recommends: r-recommended but it is not going to be installed&#xA;               Recommends: r-base-dev but it is not going to be installed&#xA;               Recommends: r-doc-html but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The error persists after trying the following solutions.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/716915/dpkg-error-processing-packages-cannot-complete-install-desktop-gui-from-termina&quot;&gt;https://askubuntu.com/questions/716915/dpkg-error-processing-packages-cannot-complete-install-desktop-gui-from-termina&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/140246/how-do-i-resolve-unmet-dependencies-after-adding-a-ppa&quot;&gt;https://askubuntu.com/questions/140246/how-do-i-resolve-unmet-dependencies-after-adding-a-ppa&lt;/a&gt; (this lists many options. I tried bullets 2, 3, 4.)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I'm using version &lt;code&gt;5.1.7 Hera&lt;/code&gt;. I've tried the R project instructions for Debian and Ubuntu, and I've seen people post about a similar error on Ubuntu (&lt;a href=&quot;https://serverfault.com/questions/767684/issues-installing-r-package-r-base-ubuntu-14&quot;&gt;https://serverfault.com/questions/767684/issues-installing-r-package-r-base-ubuntu-14&lt;/a&gt;). Here's my &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb mirror://mirrors.ubuntu.com/mirrors.txt bionic main restricted universe multiverse&#xA;deb-src mirror://mirrors.ubuntu.com/mirrors.txt bionic main restricted universe multiverse&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt bionic-updates main restricted universe multiverse&#xA;deb-src mirror://mirrors.ubuntu.com/mirrors.txt bionic-updates main restricted universe multiverse&#xA;deb http://cloud.r-project.org/bin/linux/ubuntu eoan-cran35/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And here's &lt;code&gt;cat /etc/apt/sources.list.d/*&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb mirror://mirrors.ubuntu.com/mirrors.txt bionic main restricted universe multiverse&#xA;deb-src mirror://mirrors.ubuntu.com/mirrors.txt bionic main restricted universe multiverse&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt bionic-updates main restricted universe multiverse&#xA;deb-src mirror://mirrors.ubuntu.com/mirrors.txt bionic-updates main restricted universe multiverse&#xA;deb http://cloud.r-project.org/bin/linux/ubuntu eoan-cran35/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I want to know:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is this problem due to following instructions for Debian/Ubuntu whilst using Elementary?&lt;/li&gt;&#xA;&lt;li&gt;Whether or not it is due to that, how do I fix it? Surely it must be possible to install R on Linux.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="23658" LastActivityDate="2020-08-08T22:26:47.697" Title="Install R 3.6.3 on elementary OS: unmet dependencies" Tags="|apt|package-management|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25444" PostTypeId="1" CreationDate="2020-08-09T08:36:56.757" Score="0" ViewCount="73" Body="&lt;p&gt;Installation of latest version goes without problem but Ethernet is not showing up as available networking option.&lt;/p&gt;&#xA;&lt;p&gt;Does Elementary support RTL8125 2.5GbE Controller at all?&lt;/p&gt;&#xA;" OwnerUserId="23668" LastActivityDate="2023-12-25T10:06:05.757" Title="Elementary does not work with my RTL8125 2.5GbE Controller" Tags="|networking|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25446" PostTypeId="1" CreationDate="2020-08-09T17:13:36.667" Score="2" ViewCount="367" Body="&lt;p&gt;will the devs introduce a way to directly upgrade Elementary OS from one version to another when Elementary OS 6 releases?&lt;/p&gt;&#xA;" OwnerUserId="23670" LastActivityDate="2024-01-09T19:05:30.720" Title="Direct upgrade to elementary OS 6" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25447" PostTypeId="1" CreationDate="2020-08-09T22:39:29.223" Score="0" ViewCount="41" Body="&lt;p&gt;So doing a bit of playing around with Elementary.  I got it installed on a big USB SSD drive I have and it's working well.&lt;/p&gt;&#xA;&lt;p&gt;Except, installing non-curated software from the Applications tools results in very old versions of the software being installed.&lt;/p&gt;&#xA;&lt;p&gt;Installing GIMP via the App tool installed v2.8 whereas the latest is 2.10.20&#xA;Installing Digikam installed v 5.6 where the lastest is v7.0&lt;/p&gt;&#xA;&lt;p&gt;Getting the latest of these two installed was a bit of a flail with a goodly amount of digging and command line activity beyond a simple apt-get install. GMP was not too bad, Digikam was a struggle.&lt;/p&gt;&#xA;&lt;p&gt;Why?&lt;/p&gt;&#xA;" OwnerUserId="13300" LastActivityDate="2023-12-23T21:06:05.703" Title="Why doesn't the Application dohicky install the latest software version?" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25448" PostTypeId="2" ParentId="25447" CreationDate="2020-08-10T03:22:20.717" Score="0" Body="&lt;p&gt;If you go to flathub you can install the Gimp flatpack from there.  From there forward flatpacks will show up in the App Center.DigiKam is there as well.&lt;/p&gt;&#xA;&lt;p&gt;By default, App Center seems to have the version in the ubuntu repositories.  I don't now if any repository carries the latest Gimp.&lt;/p&gt;&#xA;&lt;p&gt;edit:  Clarity&lt;/p&gt;&#xA;" OwnerUserId="20905" LastEditorUserId="20905" LastEditDate="2020-08-10T13:36:13.837" LastActivityDate="2020-08-10T13:36:13.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25449" PostTypeId="1" CreationDate="2020-08-10T04:42:11.127" Score="0" ViewCount="54" Body="&lt;p&gt;I am using elementary os for more than 6 months now and i faced no problem, but now whenever i am trying to switch on my laptop the logo shows for few minutes and then it takes me to (initramfs) screen i tries several methods available online, none worked for me, it takes me to the new lvmetad error. Now every time i have to go to advanced booting option and select the older version to get my system started. Please help me with this issue.&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="23671" LastActivityDate="2022-01-03T21:04:55.433" Title="Problem with Booting" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25450" PostTypeId="1" CreationDate="2020-08-10T06:27:04.777" Score="0" ViewCount="61" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vE6Es.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vE6Es.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Why are both &lt;strong&gt;close&lt;/strong&gt; and &lt;strong&gt;minimize&lt;/strong&gt; icons both on the left? Is it possible to make minimize icon appear on the right?&lt;/p&gt;&#xA;" OwnerUserId="23673" LastActivityDate="2023-12-25T01:02:55.393" Title="Hiding titlebar in Firefox?" Tags="|icons|firefox|minimize|title-bar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25451" PostTypeId="1" CreationDate="2020-08-10T15:16:04.230" Score="0" ViewCount="83" Body="&lt;p&gt;I bought this Seagate Expansion Drive with 2TB of space so I could backup files from both machines I have, one with Elementary OS and another with Win 10. It worked at first but weirdly it seems not to behave the same way in both machines.&lt;/p&gt;&#xA;&lt;p&gt;Timeline is:&lt;/p&gt;&#xA;&lt;p&gt;1 - Connected the External HDD to the Win 10 PC. It seemed all right, with Seagate's icon and everything else there.&lt;/p&gt;&#xA;&lt;p&gt;2 - Transferred some files to it from the Win PC.&lt;/p&gt;&#xA;&lt;p&gt;3 - Disconnected it from the Win PC.&lt;/p&gt;&#xA;&lt;p&gt;4 - Connected to the eOS machine and it seemed everything was ok. The HDD is formated in NTFS and I've been reading about native support from Ubuntu-like OSes and Elementary didn't failed me there. I could reach everything I had transferred at first, from Win machine.&lt;/p&gt;&#xA;&lt;p&gt;5 - Started transferring from eOS machine to it using &lt;code&gt;$ cp -r /origin/ /media/username/Seagate\ Extension\ Drive/destination/&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;6 - This is where I think everything went wrong&lt;/strong&gt;. The transfer was long (up to 15 hours) and I had a power source issue that made the Notebook shutdown.&lt;/p&gt;&#xA;&lt;p&gt;7 - Turned it back on and suddenly the Seagate External HDD wouldn't be recognized as it was before (meaning it didn't mounted or showed as it in nautilus left nav bar).&lt;/p&gt;&#xA;&lt;p&gt;8 - Found out I had no permission to access the Seagate thru terminal with &lt;code&gt;$ cd /media/username/Seagate\ Extension\ Drive/&lt;/code&gt;. So I figured it out that I should give my user the permission with &lt;code&gt;$ sudo chown username:username&lt;/code&gt; and it worked in the sense that I finally could reach it, but it seemed all empty (no Win backups there).&lt;/p&gt;&#xA;&lt;p&gt;9 - Transferred some folders to check if the opposite would be true and I wouldn't see eOS files on Win and it is. The HDD mounts and opens normally, with no sign of my files transferred to the External HDD.&lt;/p&gt;&#xA;&lt;p&gt;10 - I've deleted these files I used to test and ran some commands to check if it's in fact mounted and it's not.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo df&#xA;Sist. Arq.     Blocos de 1K     Usado Disponível Uso% Montado em&#xA;udev                8098356         0    8098356   0% /dev&#xA;tmpfs               1627212      1876    1625336   1% /run&#xA;/dev/nvme0n1p3     95596964  17345588   73352204  20% /&#xA;tmpfs               8136048     79944    8056104   1% /dev/shm&#xA;tmpfs                  5120         4       5116   1% /run/lock&#xA;tmpfs               8136048         0    8136048   0% /sys/fs/cgroup&#xA;/dev/loop0            30592     30592          0 100% /snap/snapd/8140&#xA;/dev/loop1           165376    165376          0 100% /snap/gnome-3-28-1804/128&#xA;/dev/loop3           145152    145152          0 100% /snap/code/39&#xA;/dev/loop2            99328     99328          0 100% /snap/core/9665&#xA;/dev/loop4            30720     30720          0 100% /snap/snapd/8542&#xA;/dev/loop5            56320     56320          0 100% /snap/core18/1880&#xA;/dev/loop6           109056    109056          0 100% /snap/yakyak/74&#xA;/dev/loop7           147840    147840          0 100% /snap/code/38&#xA;/dev/loop8            97792     97792          0 100% /snap/yakyak/66&#xA;/dev/loop9            98944     98944          0 100% /snap/core/9436&#xA;/dev/loop10           56704     56704          0 100% /snap/core18/1885&#xA;/dev/loop11           49536     49536          0 100% /snap/gtk-common-themes/1474&#xA;/dev/loop12           63616     63616          0 100% /snap/gtk-common-themes/1506&#xA;/dev/nvme0n1p1      1934672    739664    1078684  41% /boot&#xA;/dev/nvme0n1p5    349097856 172430824  158864180  53% /home&#xA;/dev/nvme0n1p2       998480      6232     992248   1% /boot/efi&#xA;/dev/sda3         508502928  43456608  439146188  10% /home/eduardo/HDD&#xA;/dev/loop13          164096    164096          0 100% /snap/gnome-3-28-1804/116&#xA;/dev/sda2         459070460 386188352   72882108  85% /home/eduardo/windows&#xA;tmpfs               1627208        72    1627136   1% /run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Meanwhile, fdisk tells me this: the drive format type is HPFS/NTFS/exFAT. Not sure what this means.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;eduardo@Colossus:/$ sudo fdisk -l&#xA;Disco /dev/loop0: 29,8 MiB, 31272960 bytes, 61080 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop1: 161,4 MiB, 169254912 bytes, 330576 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop2: 97 MiB, 101695488 bytes, 198624 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop3: 141,6 MiB, 148512768 bytes, 290064 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop4: 29,9 MiB, 31334400 bytes, 61200 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop5: 55 MiB, 57626624 bytes, 112552 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop6: 106,4 MiB, 111546368 bytes, 217864 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop7: 144,4 MiB, 151375872 bytes, 295656 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/nvme0n1: 465,8 GiB, 500107862016 bytes, 976773168 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;Tipo de rótulo do disco: gpt&#xA;Identificador do disco: 0A86548C-E1A7-422E-85AA-32984E84CC56&#xA;&#xA;Dispositivo       Início       Fim   Setores Tamanho Tipo&#xA;/dev/nvme0n1p1      2048   3999743   3997696    1,9G Linux sistema de arquivos&#xA;/dev/nvme0n1p2   3999744   6000639   2000896    977M Sistema EFI&#xA;/dev/nvme0n1p3   6000640 201312255 195311616   93,1G Linux sistema de arquivos&#xA;/dev/nvme0n1p4 201312256 265312255  64000000   30,5G Linux swap&#xA;/dev/nvme0n1p5 265312256 976771071 711458816  339,3G Linux sistema de arquivos&#xA;&#xA;&#xA;Disco /dev/sda: 931,5 GiB, 1000204886016 bytes, 1953525168 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 4096 bytes&#xA;Tamanho E/S (mínimo/ótimo): 4096 bytes / 4096 bytes&#xA;Tipo de rótulo do disco: gpt&#xA;Identificador do disco: DB83DB04-807A-4F8B-B0CF-18BBC9B4EEB3&#xA;&#xA;Dispositivo    Início        Fim    Setores Tamanho Tipo&#xA;/dev/sda1          34      32767      32734     16M Microsoft reservado&#xA;/dev/sda2       32768  918173695  918140928  437,8G Microsoft dados básico&#xA;/dev/sda3   918173696 1953523711 1035350016  493,7G Linux sistema de arquivos&#xA;&#xA;A partição 1 não inicia em um limite de setor físico.&#xA;&#xA;&#xA;Disco /dev/loop8: 95,5 MiB, 100118528 bytes, 195544 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop9: 96,5 MiB, 101191680 bytes, 197640 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop10: 55,3 MiB, 58007552 bytes, 113296 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop11: 48,3 MiB, 50642944 bytes, 98912 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop12: 62,1 MiB, 65105920 bytes, 127160 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/loop13: 160,2 MiB, 167931904 bytes, 327992 setores&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 512 bytes&#xA;Tamanho E/S (mínimo/ótimo): 512 bytes / 512 bytes&#xA;&#xA;&#xA;Disco /dev/sdb: 1,8 TiB, 2000398933504 bytes, 3907029167 setores &amp;lt;--&#xA;Unidades: setor de 1 * 512 = 512 bytes&#xA;Tamanho de setor (lógico/físico): 512 bytes / 4096 bytes&#xA;Tamanho E/S (mínimo/ótimo): 4096 bytes / 4096 bytes&#xA;Tipo de rótulo do disco: dos&#xA;Identificador do disco: 0xa32770f6&#xA;&#xA;Dispositivo Inicializar Início        Fim    Setores Tamanho Id Tipo&#xA;/dev/sdb1                 2048 3907026943 3907024896    1,8T  7 HPFS/NTFS/exFAT &amp;lt;--&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm guessing that the power crash ruined the permissions and now I can't reach files in this external HDD properly but I'm not sure at all if that is right.&lt;/p&gt;&#xA;&lt;p&gt;Is there anything I could do in order to solve this?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance for any insights and ideas that could lead me to a solution.&lt;/p&gt;&#xA;" OwnerUserId="4231" LastActivityDate="2024-01-23T21:05:15.590" Title="eOS and Win 10 can't see eachother files in an External HDD formatted NTFS" Tags="|mount|permissions|hdd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25452" PostTypeId="2" ParentId="25451" CreationDate="2020-08-10T16:50:51.733" Score="0" Body="&lt;p&gt;After some more try, I managed to solve this.&lt;/p&gt;&#xA;&lt;p&gt;I tried to mount it manually and it showed me some error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo mount -t ntfs-3g -o defaults,rw,uid=1000,users /dev/sdb1 /media/eduardo&#xA;$MFTMirr does not match $MFT (record 0).&#xA;Failed to mount '/dev/sdb1': Erro de entrada/saída&#xA;NTFS is either inconsistent, or there is a hardware fault, or it's a&#xA;SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows&#xA;then reboot into Windows twice. The usage of the /f parameter is very&#xA;important! If the device is a SoftRAID/FakeRAID then first activate&#xA;it and mount a different device under the /dev/mapper/ directory, (e.g.&#xA;/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation&#xA;for more details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So I went with the external HDD to windows machine to run the chkdsk /f which happened to solve the problem itself by correcting the errors caused by the power drop.&lt;/p&gt;&#xA;" OwnerUserId="4231" LastActivityDate="2020-08-10T16:50:51.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25453" PostTypeId="1" CreationDate="2020-08-10T21:20:58.993" Score="0" ViewCount="51" Body="&lt;p&gt;eOS community.&#xA;I was very excited to try Elementary OS on a Dell Inspiron 3452 laptop; however, when I try to boot into the new OS, the computer can't find it.&#xA;The machine has a 32GB emmc that I had previously succeeded in installing and running Lubuntu on. I have tried installing eOS with both UEFI on and UEFI off (legacy mode). In either configuration, after the initial installation (which seems to go well) the machine will not boot and reports an error of no operating system found. Since eOS and Lubuntu are both based on the same Linux architecture, I feel like I should be able to run eOS.&#xA;Any help would be greatly appreciated.&#xA;TIA.&lt;/p&gt;&#xA;" OwnerUserId="23678" LastActivityDate="2023-12-25T12:05:10.570" Title="Can't Get Fresh Install to Boot on Dell Inspiron 3452" Tags="|boot|uefi|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25454" PostTypeId="2" ParentId="24840" CreationDate="2020-08-11T01:04:54.050" Score="0" Body="&lt;p&gt;I got the answer from this post.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1227972/touchpad-of-lenovo-ideapad-s145-15iil-not-detected-in-18-04-and-19-10-ubuntu-an&quot;&gt;https://askubuntu.com/questions/1227972/touchpad-of-lenovo-ideapad-s145-15iil-not-detected-in-18-04-and-19-10-ubuntu-an&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The workaround is to pass these parameters to the kernel.&lt;/p&gt;&#xA;&lt;p&gt;i8042.nopnp=1 pci=nocrs&lt;/p&gt;&#xA;&lt;p&gt;It's recommended to test before change definitily like this.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/KernelBootParameters&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/KernelBootParameters&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This worked for me.&lt;/p&gt;&#xA;" OwnerUserId="12891" LastActivityDate="2020-08-11T01:04:54.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25455" PostTypeId="2" ParentId="12092" CreationDate="2020-08-11T08:19:34.337" Score="0" Body="&lt;p&gt;I install elementary-sdk on Linux-lite 5&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;sudo add-apt-repository ppa:elementary-os/daily&lt;/li&gt;&#xA;&lt;li&gt;sudo apt update&lt;/li&gt;&#xA;&lt;li&gt;sudo apt install libgala-dev&lt;/li&gt;&#xA;&lt;li&gt;sudo apt install elementary-sdk&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="23681" LastActivityDate="2020-08-11T08:19:34.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25456" PostTypeId="2" ParentId="25453" CreationDate="2020-08-11T10:37:15.493" Score="0" Body="&lt;p&gt;I have had a few Inspiron machines in the past, and my primary machine is an Inspiron as well, so I'll provide some details that have matched my experiences in getting these things set up. Typically, there are three major things to consider...&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Ensure that the eMMC is &lt;em&gt;unmounted&lt;/em&gt; when you boot into the live USB. To do this, you can use the &amp;quot;Try elementary&amp;quot; option in the initial GUI prompt and then open GParted, and unmount any partitions on the eMMC that are mounted. eMMC disks are seen as SD cards in many cases, especially with consumer hardware like Inspirons, and thus get automounted as removable media.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You may need to manually add the boot option from within the Dell UEFI menu. You can likely do this by entering the UEFI/BIOS settings, navigating to the boot tab/menu, and then manually adding or reordering options. This may mean navigating the filesystem from within the UEFI, but usually it doesn't go that far.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;There are certain toggles in the UEFI that can cause some struggles. In some cases, the &amp;quot;TPM&amp;quot; option, which is short for &amp;quot;Trusted Platform Module&amp;quot;, can cause images to be unbootable. If the first and second options don't result in a fix, try toggling this function. Two of my inspirons in the past have required me to do this.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T10:37:15.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25457" PostTypeId="2" ParentId="25450" CreationDate="2020-08-11T10:41:31.473" Score="0" Body="&lt;p&gt;Indeed! To do this you need to open the customization options in Firefox (via the Firefox menu), and enable the &amp;quot;Title Bar&amp;quot; option in the bottom left of the window. This will enable the system-style titlebars and borders, including proper positioning of window controls.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jWeLL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jWeLL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T10:41:31.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25458" PostTypeId="2" ParentId="25444" CreationDate="2020-08-11T10:45:17.547" Score="0" Body="&lt;p&gt;If possible, could you try connecting the machine to the internet via Ethernet over USB? This could be via adapter, directly from the router/modem, or tethering from a phone. Assuming this step works, fully update your system. The 5.4 kernel should include fixes for many RT devices. Once updated, make sure to restart, and if necessary, reconnect to Ethernet over USB and search for available drivers in AppCenter in the &amp;quot;Installed&amp;quot; tab or by using the &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; command.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T10:45:17.547" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25459" PostTypeId="2" ParentId="25424" CreationDate="2020-08-11T10:53:46.980" Score="1" Body="&lt;p&gt;Yes! There are multiple methods to do this.&lt;/p&gt;&#xA;&lt;p&gt;You could try the AppEditor application from the AppCenter, and this will allow you to edit local .desktop entries that show up in your menu. By hiding these in AppEditor, they should become invisible in your Applications menu.&#xA;&lt;a href=&quot;http://appcenter.elementary.io/com.github.donadigo.appeditor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://appcenter.elementary.io/com.github.donadigo.appeditor/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There is also the option of manually copying the .desktop files, or creating new ones, of the applications you don't want to see, and adding the &lt;code&gt;NoDisplay=true&lt;/code&gt; criteria to it.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T10:53:46.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25460" PostTypeId="2" ParentId="25410" CreationDate="2020-08-11T10:58:47.343" Score="0" Body="&lt;p&gt;Overamplification might not be presented in the Sound Switchboard plugin, but there is an application called PulseAudio Volume Control that will provide you will these options and leveling tools. You can find it in the AppCenter as a non-curated app, or you can install it via CLI using &lt;code&gt;sudo apt install pavucontrol&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T10:58:47.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25461" PostTypeId="2" ParentId="25359" CreationDate="2020-08-11T11:10:29.290" Score="0" Body="&lt;p&gt;If I'm not mistaken, this sometimes has to do with how the application presents notifications to the OS. Things like Telegram or Skype for instance, can display badge icons in the Dock or Applications menu similar to the way things like AppCenter can. The glowing dot you're seeing in Ubuntu is part of the AppIndicator/System Tray icon in the panel, but this is not reflective of what you might see in the Dock. Take a look at the Ubuntu Dock, for instance. Does the same app provide you with a matching badge for the app there as well? If not, then it's likely that the application is currently hardcoded with support only for typical system tray implementations.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T11:10:29.290" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25462" PostTypeId="2" ParentId="25343" CreationDate="2020-08-11T11:15:17.273" Score="0" Body="&lt;p&gt;Typically this issue manifests itself when connection details to the internet differ from what was provided during the connection to the network itself. Essentially, mobile hotspots are subject to constant changes. While your connection to the network (the phone/hotspot) will remain active and constant, the connection to your carrier is always in flux. Your device will go through many shifts including IP and other routing changes that will at some point cause reliant devices like your laptop to be unable to access data beyond the local network itself without re-establishing a connection with proper details.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T11:15:17.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25463" PostTypeId="2" ParentId="25304" CreationDate="2020-08-11T11:29:35.917" Score="0" Body="&lt;p&gt;-When you open Calendar, there's a cog on the top right of the window which will open up an options dropdown.&lt;/p&gt;&#xA;&lt;p&gt;-From there you can add a new calendar by clicking the &amp;quot;Add New Calendar...&amp;quot; option.&lt;/p&gt;&#xA;&lt;p&gt;-Then, you would open the &amp;quot;Type&amp;quot; dropdown and select &amp;quot;Google&amp;quot;. You would then name your calendar, and enter the Gmail address associated with the specific GSuite calendar you're attempting to sync and then choose &amp;quot;Create Calendar&amp;quot;. Separate addresses might appear in your GSuite dashboard. You might also have GSuite calendars nested under the main Gmail address.&lt;/p&gt;&#xA;&lt;p&gt;-Afterwards, you will be prompted for the password to authenticate the calendar add.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Please note that if you use 2FA (Two Factor Authentication), you will need to create an app password specifically for this at &lt;a href=&quot;https://myaccount.google.com/apppasswords&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://myaccount.google.com/apppasswords&lt;/a&gt; and enter that instead of your normal password.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hza05.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hza05.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2aTwU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2aTwU.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vcE8g.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vcE8g.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-11T11:29:35.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25465" PostTypeId="2" ParentId="21919" CreationDate="2020-08-11T16:11:05.347" Score="0" Body="&lt;p&gt;Elementary OS has &lt;a href=&quot;https://blog.elementary.io/goodbye-bountysource-hello-github-sponsors/&quot; rel=&quot;nofollow noreferrer&quot;&gt;ended their relationship&lt;/a&gt; with Bountysource&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2020-08-11T16:11:05.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25467" PostTypeId="2" ParentId="25449" CreationDate="2020-08-11T16:36:01.497" Score="1" Body="&lt;p&gt;If you set the following it will always boot the version that currently works. However you may want to change it every time the kernel gets updated so as to always use the more recent version possible.&lt;/p&gt;&#xA;&lt;p&gt;From terminal (Ctrl+T) execute:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo io.elementary.code /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Set the line &lt;code&gt;GRUB_DEFAULT=&amp;quot;0&amp;quot;&lt;/code&gt; to &lt;code&gt;GRUB_DEFAULT=&amp;quot;saved&amp;quot;&lt;/code&gt;. Now close and execute on terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And done! On the next reboot it should work.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-08-11T16:36:01.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25470" PostTypeId="2" ParentId="16112" CreationDate="2020-08-12T04:10:38.010" Score="0" Body="&lt;p&gt;Change Exec=LIBGL_ALWAYS_SOFTWARE=1 obs&lt;/p&gt;&#xA;&lt;p&gt;to &lt;strong&gt;Exec=sh -c &amp;quot;LIBGL_ALWAYS_SOFTWARE=1 obs&amp;quot;&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="8902" LastEditDate="2020-08-12T04:55:08.377" LastActivityDate="2020-08-12T04:55:08.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25471" PostTypeId="1" AcceptedAnswerId="25480" CreationDate="2020-08-12T14:57:44.197" Score="0" ViewCount="219" Body="&lt;p&gt;I lost a lot of changes recently and I'm trying to figure out what went wrong, how to avoid this issue in the future, and how to recover my work if possible.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Does Elementary OS's Code app save files when you press CTRL+q?&lt;/li&gt;&#xA;&lt;li&gt;Does it save files when you press CTRL+s?&lt;/li&gt;&#xA;&lt;li&gt;Is there any visual indicator of whether the file has unsaved changes, such as an asterisk next to the filename?&lt;/li&gt;&#xA;&lt;li&gt;Are there any common actions that might disable saving, such as switching to dark mode or attaching the document to an email (outside Code)?&lt;/li&gt;&#xA;&lt;li&gt;Does it save backups or anything like emacs's &lt;code&gt;#foo.txt#&lt;/code&gt; and &lt;code&gt;~foo.txt&lt;/code&gt;?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="23658" LastEditorUserId="23658" LastEditDate="2020-08-12T15:07:12.763" LastActivityDate="2020-08-14T00:27:46.700" Title="Elementary OS Code save behavior" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25474" PostTypeId="1" CreationDate="2020-08-12T19:05:52.550" Score="0" ViewCount="241" Body="&lt;p&gt;I was having an issue where my wingpanel had disappeared, and in trying to solve it I did the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;killall wingpanel&#xA;sudo apt-get purge wingpanel&#xA;sudo apt-get install wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge indicator-synapse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then rebooted my computer. &lt;br /&gt;&#xA;&lt;br /&gt;&#xA;Now my wingpanel is back, but rather than having the eOS theme and layout it has the GNOME theme (pictured below). When I try &lt;code&gt;wingpanel&lt;/code&gt; or &lt;code&gt;killall wingpanel&lt;/code&gt;, the commands execute but nothing happens. &lt;br /&gt;&#xA;&lt;br /&gt;&#xA;Another issue that arose is that plank does not open on startup, but it is able to startup from the terminal.&lt;br /&gt;&#xA;&lt;br /&gt;&#xA;Any input on how to change my wingpanel back to the default eOS theme, and how to have plank open on startup is greatly appreciated.&#xA;&lt;br /&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/RlA6l.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RlA6l.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23695" LastEditorUserId="23695" LastEditDate="2020-08-12T19:19:50.533" LastActivityDate="2023-05-01T02:01:55.210" Title="Wingpanel changed from eOS to Ubuntu" Tags="|wingpanel|plank|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25476" PostTypeId="1" CreationDate="2020-08-12T21:13:28.273" Score="0" ViewCount="154" Body="&lt;p&gt;Okay, there's few things I need to clear first:&lt;/p&gt;&#xA;&lt;p&gt;I was using eOS for about a month when I ran into some issues and decided to restore Timeshift image. To my surprise it did not work as expected and done more harm. After like a week of back and forth between new installs and restores from various Timeshift images I finally settled for a workable system.&lt;/p&gt;&#xA;&lt;p&gt;The thing is, however, now, after few more reinstall there are few issues with my eOS:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I cannot update (terminal result follows)&lt;/li&gt;&#xA;&lt;li&gt;I cannot install repositories&lt;/li&gt;&#xA;&lt;li&gt;My Settings-About says I have Ubuntu 18.04.5 LTS. I should have Hera 5.1.4 or .6&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I did try following commands but none have helped:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg-reconfigure -a&#xA;sudo apt-get -f install&#xA;sudo apt-get --purge remove &amp;amp;&amp;amp; sudo apt-get autoclean&#xA;sudo apt --fix-broken install&#xA;sudo apt-get dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Anyone knows what's wrong and how to fix it (without another reinstall)?&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get update&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Ign:1 http://security.ubuntu.com/ubuntu hera-security InRelease&#xA;Ign:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu hera InRelease&#xA;Ign:3 http://archive.ubuntu.com/ubuntu hera InRelease               &#xA;Get:4 http://security.ubuntu.com/ubuntu bionic-security InRelease [88,7 kB]                &#xA;Ign:5 http://download.opensuse.org/repositories/home:/strycore/xUbuntu_16.04  InRelease    &#xA;Ign:6 http://archive.ubuntu.com/ubuntu hera-updates InRelease                              &#xA;Ign:7 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera InRelease   &#xA;Err:8 http://download.opensuse.org/repositories/home:/strycore/xUbuntu_16.04  Release      &#xA;  404  Not Found [IP: 195.135.221.134 80]&#xA;Ign:9 http://archive.ubuntu.com/ubuntu hera-backports InRelease                            &#xA;Hit:10 http://archive.ubuntu.com/ubuntu bionic InRelease                                   &#xA;Hit:11 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease               &#xA;Get:12 http://archive.ubuntu.com/ubuntu bionic-updates InRelease [88,7 kB]                 &#xA;Err:13 http://security.ubuntu.com/ubuntu hera-security Release                             &#xA;  404  Not Found [IP: 91.189.88.142 80]&#xA;Err:14 http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release                   &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Get:15 http://archive.ubuntu.com/ubuntu bionic-backports InRelease [74,6 kB]               &#xA;Err:16 http://archive.ubuntu.com/ubuntu hera Release                          &#xA;  404  Not Found [IP: 91.189.88.142 80]&#xA;Err:17 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release  &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:18 http://archive.ubuntu.com/ubuntu hera-updates Release                  &#xA;  404  Not Found [IP: 91.189.88.142 80]&#xA;Err:19 http://archive.ubuntu.com/ubuntu hera-backports Release&#xA;  404  Not Found [IP: 91.189.88.142 80]&#xA;Ign:20 http://packages.elementary.io/appcenter hera InRelease&#xA;Err:21 http://packages.elementary.io/appcenter hera Release&#xA;  404  Not Found [IP: 104.28.4.44 80]&#xA;Hit:22 http://deb.playonlinux.com trusty InRelease                                         &#xA;Reading package lists... Done                                                              &#xA;E: The repository 'http://download.opensuse.org/repositories/home:/strycore/xUbuntu_16.04  Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://security.ubuntu.com/ubuntu hera-security Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://archive.ubuntu.com/ubuntu hera Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://archive.ubuntu.com/ubuntu hera-updates Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://archive.ubuntu.com/ubuntu hera-backports Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'http://packages.elementary.io/appcenter hera Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Following is the /etc/apt/sources.list&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# deb cdrom:[elementary OS 5.1 _hera_ - stable amd64 (20200706)]/ bionic contrib main non-free&#xA;# deb cdrom:[elementary OS 5.1 _hera_ - stable amd64 (20200706)]/ bionic contrib main non-free&#xA;# deb mirror://mirrors.ubuntu.com/mirrors.txt hera main restricted universe multiverse&#xA;# deb-src mirror://mirrors.ubuntu.com/mirrors.txt hera main restricted universe multiverse&#xA;# deb mirror://mirrors.ubuntu.com/mirrors.txt hera-updates main restricted universe multiverse&#xA;# deb-src mirror://mirrors.ubuntu.com/mirrors.txt hera-updates main restricted universe multiverse&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://archive.ubuntu.com/ubuntu/ hera main restricted&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://archive.ubuntu.com/ubuntu/ hera-updates main restricted&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;# deb http://archive.ubuntu.com/ubuntu/ hera universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://archive.ubuntu.com/ubuntu/ hera-updates universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ hera multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ hera-updates multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ hera-backports main restricted universe multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu hera-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu hera-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu hera-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ hera universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic universe&#xA;# deb http://archive.ubuntu.com/ubuntu/ hera-updates universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;# deb http://archive.ubuntu.com/ubuntu/ hera multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;# deb http://archive.ubuntu.com/ubuntu/ hera-updates multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;# deb http://archive.ubuntu.com/ubuntu/ hera-backports main restricted universe multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;# deb http://security.ubuntu.com/ubuntu hera-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;# deb http://security.ubuntu.com/ubuntu hera-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;# deb http://security.ubuntu.com/ubuntu hera-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;# deb-src http://archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23696" LastEditorUserId="23696" LastEditDate="2020-08-13T08:19:37.313" LastActivityDate="2020-08-13T08:19:37.313" Title="eOS cannot update" Tags="|release-hera|updates|repositories|sources|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="25478" PostTypeId="2" ParentId="13047" CreationDate="2020-08-13T17:50:02.157" Score="0" Body="&lt;p&gt;It is better to run updates from Terminal time to time.&#xA;&lt;em&gt;'sudo apt-get update' and 'sudo apt-get upgrade'&lt;/em&gt; from the error I ran&#xA;&lt;strong&gt;sudo dpkg --configure -a&lt;/strong&gt; to fix the problem&lt;/p&gt;&#xA;" OwnerUserId="23705" LastActivityDate="2020-08-13T17:50:02.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25479" PostTypeId="2" ParentId="25474" CreationDate="2020-08-13T22:34:54.117" Score="1" Body="&lt;p&gt;When you run commands in &lt;code&gt;apt&lt;/code&gt; to add or remove software, it's critical that you pay attention to &lt;em&gt;what&lt;/em&gt; is getting changed when it runs. I just checked &lt;code&gt;apt purge wingpanel&lt;/code&gt; and it removes Pantheon among other things. Pantheon is the desktop environment of elementary OS. So, that's definitely a red flag.&lt;/p&gt;&#xA;&lt;p&gt;You're going to need to (at the very least) reinstall Pantheon and the other removed software.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install pantheon-shell* pantheon-xsession-settings* wingpanel*&lt;/code&gt; and then reboot.&lt;/p&gt;&#xA;&lt;p&gt;You will likely need to select &amp;quot;Pantheon&amp;quot; at the login screen with the cog/gear icon as well.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;For future reference, do not &lt;code&gt;apt purge&lt;/code&gt; and &lt;code&gt;apt install&lt;/code&gt; packages to reinstall them. You can use &lt;code&gt;apt install --reinstall wingpanel&lt;/code&gt; to achieve the proper results without stripping the package and its dependencies out.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-13T22:34:54.117" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25480" PostTypeId="2" ParentId="25471" CreationDate="2020-08-14T00:27:46.700" Score="0" Body="&lt;p&gt;As far as I know, Code saves changes constantly. Changes made are saved without needing to manually &lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;S&lt;/code&gt;, and this means changes are saved even when you &lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;Q&lt;/code&gt;. &lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;S&lt;/code&gt; will allow you to save the file to a specific location if you haven't already.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;Ctrl&lt;/code&gt;+&lt;code&gt;S&lt;/code&gt; is still functioning as a save button, yes. If you disable autosave in Code's preferences, you will see an asterisk before the file name in the tab representing the file you have open.&lt;/p&gt;&#xA;&lt;p&gt;Changing the style or sending the file via a third party app will not inhibit autosaving. Files can be accessed by multiple applications at once, and a copy/send doesn't impact the data on the file itself.&lt;/p&gt;&#xA;&lt;p&gt;As for emacs, I'm unaware of the process there so I don't know how to draw a comparison.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-08-14T00:27:46.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25484" PostTypeId="1" AcceptedAnswerId="25488" CreationDate="2020-08-15T03:50:16.147" Score="0" ViewCount="70" Body="&lt;p&gt;I tried to add the Japanese input method and so I installed fcitx to do so as I read it was the best. It didn't work so I tried on ibus and also uninstalled the fcitx software after that and I don't know how but I ended up with every layout remapped to some weird layout as shown in the pictures. The first picture is from an English keyboard layout and the second one is from a Portuguese keyboard layout.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bN58r.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bN58r.png&quot; alt=&quot;English layout remapped?&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Y6m14.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y6m14.png&quot; alt=&quot;Portuguese layout remapped?&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;My &lt;code&gt;setxkbmap -print -verbose 10&lt;/code&gt; can be seen below, showing that the configuration is locked to some weird options.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Setting verbose level to 10&#xA;locale is C&#xA;Trying to load rules file ./rules/evdev...&#xA;Trying to load rules file /usr/share/X11/xkb/rules/evdev...&#xA;Success.&#xA;Applied rules from evdev:&#xA;rules:      evdev&#xA;model:      pc105&#xA;layout:     br,us&#xA;variant:    ,&#xA;options:    grp:alt_shift_toggle,japan:hztg_escape,japan:nicola_f_bs,japan:kana_lock&#xA;Trying to build keymap using the following components:&#xA;keycodes:   evdev+aliases(qwerty)&#xA;types:      complete&#xA;compat:     complete+japan(kana_lock)&#xA;symbols:    pc+br+us:2+inet(evdev)+group(alt_shift_toggle)+jp(nicola_f_bs)+jp(hztg_escape)&#xA;geometry:   pc(pc105)&#xA;xkb_keymap {&#xA;    xkb_keycodes  { include &amp;quot;evdev+aliases(qwerty)&amp;quot; };&#xA;    xkb_types     { include &amp;quot;complete&amp;quot;  };&#xA;    xkb_compat    { include &amp;quot;complete+japan(kana_lock)&amp;quot; };&#xA;    xkb_symbols   { include &amp;quot;pc+br+us:2+inet(evdev)+group(alt_shift_toggle)+jp(nicola_f_bs)+jp(hztg_escape)&amp;quot;    };&#xA;    xkb_geometry  { include &amp;quot;pc(pc105)&amp;quot; };&#xA;};&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I go back to the default?&lt;/p&gt;&#xA;" OwnerUserId="9688" LastEditorUserId="9688" LastEditDate="2020-08-15T04:54:17.623" LastActivityDate="2020-08-15T12:51:46.870" Title="Tried to add a Japanese keyboard layout but ended up with messed layout" Tags="|keyboard|input|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25485" PostTypeId="1" AcceptedAnswerId="27854" CreationDate="2020-08-15T05:58:31.977" Score="0" ViewCount="685" Body="&lt;p&gt;I'm trying to install elementary on a brand new HP Envy laptop, with a 10th gen Intel processor and a 1650 Ti GPU.&lt;/p&gt;&#xA;&lt;p&gt;When booting to the live USB, only half of the display renders properly. The desktop gets squished into half the screen, with the bottom half failing to display. The installation then fails on grub-install.&lt;/p&gt;&#xA;&lt;p&gt;I've updated the BIOS, re-downloaded the ISO, and re-flashed my USB drive. I've also disabled secure boot. These have not fixed the issue. Any suggestions would be greatly appreciated.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pfcDJ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pfcDJ.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23713" LastActivityDate="2021-04-30T20:16:19.773" Title="Live USB only displays on half the screen - installation fails" Tags="|system-installation|display|grub|graphics|" AnswerCount="2" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="25486" PostTypeId="2" ParentId="4168" CreationDate="2020-08-15T11:29:25.230" Score="0" Body="&lt;p&gt;add this to ~/.zshrc&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;prompt_dir() {&#xA;  prompt_segment yellow $CURRENT_FG '%2~'&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23717" LastActivityDate="2020-08-15T11:29:25.230" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25488" PostTypeId="2" ParentId="25484" CreationDate="2020-08-15T12:51:46.870" Score="0" Body="&lt;p&gt;To simply reset the keyboard layout configurations you can use dconf. From the &lt;a href=&quot;https://en.wikipedia.org/wiki/Dconf&quot; rel=&quot;nofollow noreferrer&quot;&gt;wiki&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dconf is a low-level configuration system and settings management tool. Its main purpose is to provide a back end to GSettings on platforms that don't already have configuration storage systems.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;To reset the keyboard configuration you just reset the org/gnome/input-sources using the command &lt;code&gt;dconf -reset /org/gnome/desktop/input-sources&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2020-08-15T12:51:46.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25489" PostTypeId="1" CreationDate="2020-08-15T17:02:49.083" Score="0" ViewCount="76" Body="&lt;p&gt;I seem to have fixed this issue and posting my answer below.&lt;/p&gt;&#xA;&lt;p&gt;TLDR: this seems to be common problem with AMD machines.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I am stuck with a boot problem I struggle to narrow down:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I installed elementary OS on a new laptop*, after running on my old laptop no problem&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Only difference is that I added drive encryption this time&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Current behavior&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;When booting, the system &lt;em&gt;sometimes&lt;/em&gt; gets stuck after I enter the password for disk decryption.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In these cases, it takes me to a black screen with the white cursor, but stays there until I press the power button to restart - there is no error message I see, but some updates flash by very quickly (do not know how to slow them down)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;This does not happen every time, and eventually the computer boots &amp;amp; works fine&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Questions&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;--&amp;gt; I am really confused here regarding where to debug: does this potentially have to do the decryption part? Or the OS? And why is it not consistent?&lt;/p&gt;&#xA;&lt;p&gt;--&amp;gt; Sometimes it will take me to the screen where I can pick between different Linux kernels / recovery mode: is this something I should adjust?&lt;/p&gt;&#xA;&lt;p&gt;Any pointers are much appreciated, as I don't even know where to start on this one... Thanks!&lt;/p&gt;&#xA;&lt;p&gt;*Lenovo T495, AMD® Ryzen™ 5 Pro 3500U, 24GB of RAM, 1TB Samsung SSD&lt;/p&gt;&#xA;" OwnerUserId="10348" LastEditorUserId="10348" LastEditDate="2020-09-06T17:54:26.973" LastActivityDate="2024-01-20T03:02:40.283" Title="AMD Laptop: Boot sometimes fails" Tags="|boot|amd|encryption|thinkpad|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25490" PostTypeId="1" AcceptedAnswerId="25539" CreationDate="2020-08-15T21:36:07.177" Score="0" ViewCount="211" Body="&lt;p&gt;Last week, i was updating Elementary OS, suddenly my internet connection disconnected. After connecting the internet, i saw was left 511kb of updating. After click update button, was not updated. When restart my pc always views on the app center. I tried update from command line using &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; but did not work.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wzy4c.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wzy4c.png&quot; alt=&quot;App Center&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How do i update my os?&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VwWWz.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VwWWz.jpg&quot; alt=&quot;terminal output&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Kt1Pu.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Kt1Pu.jpg&quot; alt=&quot;eterminal output 2&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;I am sorry for my Turkish outputs. Please use  translate.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;samet@samet-X540LA:~$ ls /etc/apt/sources.list.d/&#xA;baitsart-ubuntu-voice-commands-bionic.list       microsoft-prod.list       vscode.list&#xA;baitsart-ubuntu-voice-commands-bionic.list.save  microsoft-prod.list.save  vscode.list.save&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23719" LastEditorUserId="23719" LastEditDate="2020-08-16T21:37:19.387" LastActivityDate="2020-08-29T20:37:28.367" Title="Does not update Elementary" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25498" PostTypeId="2" ParentId="3679" CreationDate="2020-08-17T10:46:57.363" Score="0" Body="&lt;p&gt;Try DisplayCal &lt;a href=&quot;https://displaycal.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://displaycal.net/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can both calibrate, and assign profiles to a display. Download the package, install with a package manager (e.g. Eddy) and then run DisplayCal app. To assign a profile, go to &lt;strong&gt;File &amp;gt;&amp;gt; Install display device profile&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can also calibrate using that tool too if you have a compatible colorimeter (it supports many third party ones).&lt;/p&gt;&#xA;" OwnerUserId="7281" LastActivityDate="2020-08-17T10:46:57.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25500" PostTypeId="2" ParentId="16069" CreationDate="2020-08-17T11:19:10.250" Score="1" Body="&lt;p&gt;Epiphany feels very slow compared to Firefox, even YouTube videos don't run smoothly on Epiphany(at least in my pc). The only downside to using Firefox was the UI design. By default, Firefox doesn't look like a native Elementary OS app because it isn't. But I found a page on GitHub about an Elementary OS style theme which makes Firefox almost look like an Elementary OS native app. So there's not much left for me to use Epiphany anymore now.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-08-17T11:19:10.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25503" PostTypeId="1" CreationDate="2020-08-17T15:20:22.967" Score="0" ViewCount="77" Body="&lt;p&gt;I wanted to swap workspaces on second screen with this command:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.mutter workspaces-only-on-primary true&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;After some tests, I decided to reset the setting:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.mutter workspaces-only-on-primary false&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;And now when I switch workspaces, the background becomes gray for a second (&lt;a href=&quot;https://i.stack.imgur.com/hkXRW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;see video&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="23729" LastEditorUserId="26865" LastEditDate="2023-01-05T17:26:16.473" LastActivityDate="2024-01-30T23:05:00.537" Title="Gray background when switching workspaces" Tags="|workspace|dconf|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25508" PostTypeId="2" ParentId="25503" CreationDate="2020-08-18T06:54:52.303" Score="0" Body="&lt;p&gt;This bug appears when the main screen is on the right side. Switching main window to the left side is now working properly. To achive this we have 2 options:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Settings -&amp;gt; Display -&amp;gt; Star icon on left screen&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4qmKr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4qmKr.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;or use terminal and add &lt;code&gt;--primary&lt;/code&gt; tag to specific monitor &lt;code&gt;$ xrandr --output HDMI-A-0 --scale 1.33x1.33 --primary  --output DisplayPort-1 --pos 2554x0&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="23729" LastActivityDate="2020-08-18T06:54:52.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25510" PostTypeId="1" CreationDate="2020-08-18T14:07:53.933" Score="0" ViewCount="93" Body="&lt;p&gt;I downloaded the Hera 5.1 ISO and used Rufus 3.11 to burn the ISO to a USB Drive (16GB). When burning, I used MBR for the boot and selected about 12GB for the persistence volume.&lt;/p&gt;&#xA;&lt;p&gt;The install went fine. The USB boots to the Install/Try elementary OS prompt. I select Try and the elementary OS loads. However, there is no persistence. For example, I need to reset the background and re-enter the WiFI information with each boot.&lt;/p&gt;&#xA;&lt;p&gt;I checked and there is a casper-rw partition available and it mounts under elementary OS. It uses about 128MB of the 12GB. But I see no files in that mount from within elemntary OS.&lt;/p&gt;&#xA;&lt;p&gt;Has anyone else gotten elementary OS 5.1 Hera to run off a Live USB with persistence and if so, how? I tried re-burning it with another  USB creator (LinuxLive USB) and same result--no persistence.&lt;/p&gt;&#xA;" OwnerUserId="12058" LastActivityDate="2020-08-18T14:07:53.933" Title="How to install elementary OS 5.1 Hera on USB Live With Working Persistence" Tags="|live-cd|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25511" PostTypeId="1" CreationDate="2020-08-18T17:17:12.090" Score="0" ViewCount="96" Body="&lt;p&gt;I have a Canon MP282 multifunction printer and although printing worked out of the box, scanning does not. How can I make scanning possible? Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="23742" LastActivityDate="2024-01-01T14:00:55.183" Title="Want to install scanner function (Canon MP282 [Pixma])" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25513" PostTypeId="2" ParentId="24354" CreationDate="2020-08-19T00:38:17.457" Score="0" Body="&lt;p&gt;Some techs have pointed fingers at Dell's wifi card choice. I have had flaky wifi work when I switched to a Broadcom card from the Intel card.&lt;/p&gt;&#xA;" OwnerUserId="23737" LastActivityDate="2020-08-19T00:38:17.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25514" PostTypeId="2" ParentId="25511" CreationDate="2020-08-19T00:46:32.123" Score="0" Body="&lt;p&gt;Canon provides a Linux driver here:  &lt;a href=&quot;https://www.canon-europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mp_series/pixma_mp282.html?type=drivers&amp;amp;driverdetailid=tcm:13-822918&amp;amp;os=linux%20%2864-bit%29&amp;amp;language=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.canon-europe.com/support/consumer_products/products/fax__multifunctionals/inkjet/pixma_mp_series/pixma_mp282.html?type=drivers&amp;amp;driverdetailid=tcm:13-822918&amp;amp;os=linux%20%2864-bit%29&amp;amp;language=en&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23737" LastActivityDate="2020-08-19T00:46:32.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25518" PostTypeId="2" ParentId="25264" CreationDate="2020-08-20T03:50:45.493" Score="0" Body="&lt;p&gt;To tell you the truth, your CPU and RAM are not enough. I also have a computer like you. The CPU performance of this model is so weak that it will run full load for a long time when decompressing a slightly larger compressed file; however, your RAM can only barely run lubuntu. It is inevitable that computers with this configuration will get stuck when running. Therefore, it is recommended that you upgrade the ram to at least 4GB and upgrade the CPU, so that you can run lubuntu, xubuntu and windows 10 x86 more smoothly. You can also choose Windows 8 / 8.1 or LTSC, which is smoother than windows 10. Of course, you can run these systems without upgrading the hardware, but it will be very slow.&lt;/p&gt;&#xA;" OwnerUserId="23752" LastActivityDate="2020-08-20T03:50:45.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25520" PostTypeId="2" ParentId="25279" CreationDate="2020-08-20T16:48:51.337" Score="0" Body="&lt;p&gt;You could try with &lt;a href=&quot;https://eos-techs.com/2020/05/14/howto-change-slingshot-to-the-old-style-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://eos-techs.com/2020/05/14/howto-change-slingshot-to-the-old-style-in-elementary-os/&lt;/a&gt; to get the old look back.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-08-20T16:48:51.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25522" PostTypeId="1" CreationDate="2020-08-21T10:53:38.333" Score="0" ViewCount="895" Body="&lt;p&gt;Lately I installed eOS 5.1 Hera on my good old Asus X52JC (BIOS,no UEFI) next to Win10. Almost completely successfully, except an issue with GRUB I cannot get solved myself so far.&lt;/p&gt;&#xA;&lt;p&gt;What works:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Boots into GRUB&lt;/li&gt;&#xA;&lt;li&gt;When selecting eOS, eOS boots perfectly&lt;/li&gt;&#xA;&lt;li&gt;When getting into BIOS and selecting &amp;quot;Boot Ubuntu&amp;quot; eOS boots perfectly&lt;/li&gt;&#xA;&lt;li&gt;When getting into BIOS and selecting &amp;quot;Boot Windows Boot Manager&amp;quot; Win10 boots perfectly&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;However what does not work:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;When selecting Windows in GRUB (yes it IS correctly mentioned in GRUB list), it just gets a black screen and gets back into GRUB menu.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Tried GRUB Repair app in eOS, to no avail (error message). It does seem a GRUB issue to me, as Win10 does boot when I select it in the BIOS.&lt;/p&gt;&#xA;&lt;p&gt;What am I overlooking?&lt;/p&gt;&#xA;" OwnerUserId="23641" LastActivityDate="2024-01-07T17:05:40.657" Title="Windows Boot Manager loops back to GRUB" Tags="|boot|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25524" PostTypeId="1" CreationDate="2020-08-21T20:10:18.220" Score="0" ViewCount="53" Body="&lt;p&gt;I had to migrate from Windows to Linux for a number of reasons.&#xA;Now my sound card driver for Linux does not exist.&#xA;I use the Dynacord 600-3 mixer as a sound card.&#xA;And drivers are only available for Windows and Mac.&#xA;My job depends on your guidance.&#xA;Please help me as soon as possible.&lt;/p&gt;&#xA;&lt;p&gt;Thanks .mooseeyoo.&lt;/p&gt;&#xA;" OwnerUserId="23764" LastActivityDate="2024-02-26T01:08:40.980" Title="studio sound card" Tags="|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25525" PostTypeId="2" ParentId="25335" CreationDate="2020-08-22T10:46:18.650" Score="1" Body="&lt;p&gt;I faced the same issue, and solved it by following this guide for Ubuntu 18.04 LTS which is what Elementary OS Hera is based upon.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://vitux.com/how-to-activate-two-finger-scrolling-in-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://vitux.com/how-to-activate-two-finger-scrolling-in-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I didn't have to edit the configuration file, but after removing the libinput, and adding the synaptics package and rebooted then two finger scrolling started working. I ran the synclient command, and found that VertTwoFingerScrolling was already set to &amp;quot;1&amp;quot;.&lt;/p&gt;&#xA;" OwnerUserId="23766" LastActivityDate="2020-08-22T10:46:18.650" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25527" PostTypeId="1" CreationDate="2020-08-23T04:01:58.110" Score="1" ViewCount="481" Body="&lt;p&gt;I'm newbie in Linux, I installed elementary os recently on &lt;strong&gt;Sony cr115e&lt;/strong&gt; and webcam didn't work.&lt;br/&gt;&#xA;&lt;code&gt;lsusb       &lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&lt;br/&gt;&#xA;Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&lt;br/&gt;&#xA;Bus 006 Device 002: ID 054c:02c1 Sony Corp. &lt;br/&gt;&#xA;Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&lt;br/&gt;&#xA;Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&lt;br/&gt;&#xA;Bus 001 Device 002: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870]&lt;br/&gt;&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&lt;br/&gt;&#xA;Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&lt;br/&gt;&#xA;Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub&lt;br/&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;then I tried &lt;br/&gt;&#xA;&lt;code&gt;sudo modprobe uvcvideo    &lt;/code&gt; &lt;br/&gt;&#xA;and nothing.&lt;/p&gt;&#xA;" OwnerUserId="23770" LastEditorUserId="23770" LastEditDate="2020-08-27T11:55:58.903" LastActivityDate="2021-04-11T22:44:54.283" Title="webcam does not work (solved)" Tags="|webcam|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25528" PostTypeId="1" CreationDate="2020-08-23T10:41:39.193" Score="0" ViewCount="216" Body="&lt;p&gt;Has anyone had this issue trying to install lutris/graphics drivers on Elementory OS 5.1?&lt;/p&gt;&#xA;&lt;p&gt;Im following &lt;a href=&quot;https://github.com/lutris/docs/blob/master/InstallingDrivers.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;these&lt;/a&gt; instructions and i get the following error after running this command&lt;/p&gt;&#xA;&lt;p&gt;sudo apt install mesa-vulkan-drivers mesa-vulkan-drivers:i386&lt;/p&gt;&#xA;&lt;p&gt;The following packages have unmet dependencies:&#xA;mesa-vulkan-drivers:i386 : Depends: libzstd1:i386 (&amp;gt;= 1.3.2) but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages.&lt;/p&gt;&#xA;&lt;p&gt;I have googled and cannot find any solution for this&lt;/p&gt;&#xA;" OwnerUserId="23772" LastActivityDate="2020-08-23T10:41:39.193" Title="Cant install Mesa/Vulkan drivers.. help!" Tags="|release-hera|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25531" PostTypeId="1" CreationDate="2020-08-24T02:25:14.727" Score="0" ViewCount="411" Body="&lt;p&gt;I tried to execute pantheon-file as root for a programm that I intalled it. I wrote in terminal &amp;quot;sudo pantheon-files&amp;quot; and nothing. Later I searched references before to asked here, but only I found blogs, notes wrote in 2008, 2016 and finally I created and added the files scratch-openasroot.contract and folder-openasroot.contract in /usr/share/contractor without success.&#xA;How Can I open my files and directories as root?&#xA;Help me please D:&#xA;Thanks so much!&lt;/p&gt;&#xA;" OwnerUserId="23777" LastActivityDate="2024-01-07T21:00:35.070" Title="Execute pantheon-files as root in elementary OS Hera" Tags="|pantheon-files|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25533" PostTypeId="2" ParentId="25531" CreationDate="2020-08-24T05:44:18.487" Score="0" Body="&lt;p&gt;You can right-click it and select &amp;quot;Open new window as Administrator&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="23780" LastActivityDate="2020-08-24T05:44:18.487" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25535" PostTypeId="2" ParentId="25531" CreationDate="2020-08-24T18:37:39.363" Score="0" Body="&lt;p&gt;It was the first thing that I tried but doesn't show me that option unfortunately. One alternative I remembered and installed was nautilus :P.&lt;/p&gt;&#xA;&lt;p&gt;For who will need, In terminal: &amp;quot;sudo apt-get install nautilus&amp;quot; and when finish the install &amp;quot;sudo nautilus&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="23777" LastActivityDate="2020-08-24T18:37:39.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25538" PostTypeId="2" ParentId="16948" CreationDate="2020-08-24T21:25:07.753" Score="0" Body="&lt;p&gt;Sorry I just read this article today, I think its not relevant anymore, but if you or someone else still has the same problem try the following steps.&#xA;Ensure that you have put &amp;quot;dm-crypt&amp;quot; in your /etc/modules file of your elementary OS installation.&#xA;You should also put GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;kopt=root=/dev/mapper/vgubuntu-root&amp;quot; into the /etc/default/grub configuration file of your elementary installation if you are using grub as a boot loader and do an update-grub with chroot.&lt;/p&gt;&#xA;" OwnerUserId="23791" LastActivityDate="2020-08-24T21:25:07.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25539" PostTypeId="2" ParentId="25490" CreationDate="2020-08-25T08:59:55.927" Score="1" Body="&lt;p&gt;Oh god, finally, i solved the issue.&#xA;When i execute &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; on terminal, gets following output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;samet@samet-X540LA:~$ sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;Aynı:  1 http://tr.archive.ubuntu.com/ubuntu bionic InRelease&#xA;Aynı:  2 http://tr.archive.ubuntu.com/ubuntu bionic-updates InRelease                                              &#xA;Aynı:  3 http://tr.archive.ubuntu.com/ubuntu bionic-backports InRelease                                            &#xA;Aynı:  4 http://packages.microsoft.com/repos/vscode stable InRelease                                               &#xA;Aynı:  5 http://security.ubuntu.com/ubuntu bionic-security InRelease                                               &#xA;Aynı:  6 https://packages.microsoft.com/ubuntu/18.04/prod bionic InRelease     &#xA;Paket listeleri okunuyor... Bitti                     &#xA;Bağımlılık ağacı oluşturuluyor       &#xA;Durum bilgisi okunuyor... Bitti      &#xA;1 paket yükseltilebilir. Bu paketi görmek için 'apt list --upgradable' komutunu çalıştırın.&#xA;N: '/etc/apt/sources.list.d/' dizinindeki 'baitsart-ubuntu-voice-commands-bionic.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor&#xA;N: '/etc/apt/sources.list.d/' dizinindeki 'vscode.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor&#xA;N: '/etc/apt/sources.list.d/' dizinindeki 'microsoft-prod.list.save' dosyası geçersiz bir dosya uzantısı olduğu için yok sayılıyor&#xA;Paket listeleri okunuyor... Bitti&#xA;Bağımlılık ağacı oluşturuluyor       &#xA;Durum bilgisi okunuyor... Bitti      &#xA;Yükseltme hesaplanıyor... Bitti&#xA;Aşağıdaki paketlerin mevcut durumları korunacak:&#xA;  libodbc1&#xA;0 paket yükseltilecek, 0 yeni paket kurulacak, 0 paket kaldırılacak ve 1 paket yükseltilmeyecek.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;libodbc1&lt;/code&gt;?? I thinked a secret was in &lt;code&gt;libodbc1&lt;/code&gt; and i executed &lt;code&gt;sudo apt install libodbc1&lt;/code&gt;. Finally issue is solved.&lt;/p&gt;&#xA;" OwnerUserId="23719" LastActivityDate="2020-08-25T08:59:55.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25540" PostTypeId="2" ParentId="25522" CreationDate="2020-08-25T10:10:41.257" Score="0" Body="&lt;p&gt;Found something on Ubuntuforum that helped me. Apparently my Grub2 boot did indeed contain an issue. Though it could be repaired without additional tools, just by two simple terminal commands as found at:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1149189/gnu-grub-2-02-boot-loop&quot;&gt;https://askubuntu.com/questions/1149189/gnu-grub-2-02-boot-loop&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1. Check the disk code&lt;/strong&gt;&lt;br /&gt;&#xA;sudo fdisk -lu&lt;br /&gt;&#xA;In my case it resulted (predictably) in sda being the only physical disk.&lt;/p&gt;&#xA;&lt;p&gt;Apparaat       Begin     Einde  Sectoren Grootte Type&lt;br /&gt;&#xA;/dev/sda1       2048    206847    204800    100M EFI-systeem&lt;br /&gt;&#xA;/dev/sda2     206848    239615     32768     16M Microsoft gereserveerd&lt;br /&gt;&#xA;/dev/sda3     239616 778965559 778725944  371,3G Microsoft basisgegevens&lt;br /&gt;&#xA;/dev/sda4  778967040 780003327   1036288    506M Windows recovery-omgeving&lt;br /&gt;&#xA;/dev/sda5  780003328 937701375 157698048   75,2G Linux bestandssysteem&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;2. Apply a recheck (??) on grub:&lt;/strong&gt;&lt;br /&gt;&#xA;sudo grub-install --recheck /dev/[hard disk]&lt;/p&gt;&#xA;&lt;p&gt;For me it resulted in (translated from Dutch terminal, so exact wording may differ in UK/US terminal):&lt;/p&gt;&#xA;&lt;p&gt;Installing for x86_64-efi-platform.&lt;br /&gt;&#xA;Installation finished. No errors were reported.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3. Update Grub&lt;/strong&gt;&lt;br /&gt;&#xA;sudo update-grub&lt;/p&gt;&#xA;&lt;p&gt;Sourcing file `/etc/default/grub'&lt;br /&gt;&#xA;Aanmaken van GRUB-configuratiebestand...&lt;br /&gt;&#xA;Linux-image gevonden: /boot/vmlinuz-5.4.0-42-generic&lt;br /&gt;&#xA;Initiële RAM-schijf-image gevonden: /boot/initrd.img-5.4.0-42-generic&lt;br /&gt;&#xA;Linux-image gevonden: /boot/vmlinuz-5.3.0-62-generic&lt;br /&gt;&#xA;Initiële RAM-schijf-image gevonden: /boot/initrd.img-5.3.0-62-generic&lt;br /&gt;&#xA;Windows Boot Manager gevonden op  /dev/sda1@/EFI/Microsoft/Boot/bootmgfw.efi&lt;br /&gt;&#xA;voltooid&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Now, I can boot both eOS and Win10 nicely from the GRUB menu. Lots easier for other family members too, as I do not want them to enter BIOS ;-)&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="23641" LastActivityDate="2020-08-25T10:10:41.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25543" PostTypeId="2" ParentId="25531" CreationDate="2020-08-25T13:08:00.233" Score="0" Body="&lt;p&gt;I am not sure why you are not getting the &amp;quot;Open New Window as Administrator&amp;quot; option when you right click the dock icon - works fine for me. I assume you have administrator rights?  You can try opening a terminal and typing &lt;code&gt;io.elementary.files-pkexec&lt;/code&gt;.  This will open an authentication dialog where you can enter your admin password.  If it fails you should at least get some more information from the dialog or from the terminal.  Files intentionally prohibits using &lt;code&gt;sudo&lt;/code&gt; as it is less secure.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-08-25T13:08:00.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25544" PostTypeId="1" CreationDate="2020-08-25T13:16:17.550" Score="0" ViewCount="74" Body="&lt;p&gt;In elementary OS 5&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Distributor ID: elementary&#xA;Description:    elementary OS 5.1.7 Hera&#xA;Release:    5.1.7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;when nvidia-340 driver is enabled, after an user has logged in to the graphical environment, it is impossible to log in as a different user: after a blank screen, lightdm is proposed again (only the first user can successfully login). Remarkably, after the attempt, the resolution of lightdm is lower than the usual one. If nouveau driver is in use, the process is flawless.&#xA;Below is the (IMO) relevant part of /var/log/syslog after trying to login as 2nd user.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    Aug 25 15:00:08 cassisa-PC at-spi-bus-launcher[3777]: dbus-daemon[3782]: Successfully activated service 'org.a11y.atspi.Registry'&#xA;Aug 25 15:00:08 cassisa-PC at-spi-bus-launcher[3777]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]: X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]:   Major opcode of failed request:  151 (GLX)&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]:   Minor opcode of failed request:  3 (X_GLXCreateContext)&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]:   Value in failed request:  0x0&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]:   Serial number of failed request:  19&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]:   Current serial number in output stream:  20&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]: gnome-session-check-accelerated: GL Helper exited with code 256&#xA;Aug 25 15:00:08 cassisa-PC gnome-session-c[3788]: eglInitialize() failed&#xA;Aug 25 15:00:08 cassisa-PC gnome-session[3660]: gnome-session-check-accelerated: GLES Helper exited with code 256&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]: X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]:   Major opcode of failed request:  151 (GLX)&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]:   Minor opcode of failed request:  3 (X_GLXCreateContext)&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]:   Value in failed request:  0x0&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]:   Serial number of failed request:  19&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]:   Current serial number in output stream:  20&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]: gnome-session-check-accelerated: GL Helper exited with code 256&#xA;Aug 25 15:00:13 cassisa-PC gnome-session-c[3794]: eglInitialize() failed&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]: gnome-session-check-accelerated: GLES Helper exited with code 256&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]: gnome-session-binary[3660]: WARNING: software acceleration check failed: Processo figlio uscito con codice 1&#xA;Aug 25 15:00:13 cassisa-PC gnome-session-binary[3660]: WARNING: software acceleration check failed: Processo figlio uscito con codice 1&#xA;Aug 25 15:00:13 cassisa-PC gnome-session[3660]: gnome-session-binary[3660]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;Aug 25 15:00:13 cassisa-PC gnome-session-binary[3660]: CRITICAL: We failed, but the fail whale is dead. Sorry....&#xA;Aug 25 15:00:13 cassisa-PC at-spi-bus-launcher[3777]: XIO:  fatal IO error 11 (Resource temporarily unavailable) on X server &amp;quot;:1&amp;quot;&#xA;Aug 25 15:00:13 cassisa-PC at-spi-bus-launcher[3777]:       after 21 requests (21 known processed) with 0 events remaining.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23794" LastEditorUserId="15904" LastEditDate="2020-08-27T12:51:28.723" LastActivityDate="2021-01-29T15:01:40.247" Title="Can't login as a second user when nvidia-drivers are enabled in elementaryOS 5 using lightdm" Tags="|release-hera|greeter|nvidia|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25545" PostTypeId="2" ParentId="21615" CreationDate="2020-08-25T22:51:33.703" Score="0" Body="&lt;p&gt;I used this how to&#xA;&lt;a href=&quot;https://www.easeus.com/partition-manager-software/find-hidden-partition-or-hide-partition.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.easeus.com/partition-manager-software/find-hidden-partition-or-hide-partition.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Step 1. Right-click on This PC/My Computer and click on &amp;quot;Manage&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Step 2. Select the volume without a drive letter, the partition which you've hidden previously. Right-click it, select &amp;quot;Change Drive Letter and Paths...&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Step 3. Click &amp;quot;Add&amp;quot; to assign the drive letter for the partition to unhide it.&lt;/p&gt;&#xA;&lt;p&gt;Unhide partition.&lt;/p&gt;&#xA;&lt;p&gt;Step 4. Assign the drive letter for the hidden partition, such as F, and hit &amp;quot;OK&amp;quot;. Then your hidden partition will show up in PC and work as a normal partition to store data for you again.&lt;/p&gt;&#xA;&lt;p&gt;Once i can saw it (that ubuntu named hidden partition) i format it. Then i booted elementary from usb.&#xA;This worked for me. Hopes it helps.sorry for my English&lt;/p&gt;&#xA;" OwnerUserId="22976" LastActivityDate="2020-08-25T22:51:33.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25546" PostTypeId="1" CreationDate="2020-08-26T01:23:18.113" Score="2" ViewCount="103" Body="&lt;p&gt;&lt;strong&gt;My Problem&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;When I start up Elementary, the audio through the computer speakers work as expected.&lt;/p&gt;&#xA;&lt;p&gt;When I plug headphones into the audio jack, the audio doesn't come through the headphones.&lt;/p&gt;&#xA;&lt;p&gt;Sometimes after disconnecting the headphones, the regular speaker audio will then stop working too until I restart the machine.&lt;/p&gt;&#xA;&lt;p&gt;Having trouble connecting Bluetooth headset, my guess is Bluetooth is a separate issue for another thread (unless someone thinks it's all connected).&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;My Setup&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Dual boot - Elementary OS Hera and MacOS Catalina (27-inch 2015 iMac)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What I've Done&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;This is the link for my ALSA information script &lt;a href=&quot;http://alsa-project.org/db/?f=69fa3ea87565183bd98482333768713e81f66f17&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://alsa-project.org/db/?f=69fa3ea87565183bd98482333768713e81f66f17&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've run sudo apt update and sudo apt upgrade.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've checked the audio settings and they seem to be fine. When I plug the headphones in they show up as the Sound Output device.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In opening alsamixer, I've made sure the headphone option is unmuted and volumes are raised. Same for gnome-alsamixer.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Forced AlsaMixer to reload&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When I open pavucontrol, I can see the volume levels moving and receive no sound. I've tried multiple headphones.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Also in pavucontrol with the headphones plugged in, I've tried changing the output devices to Speakers (unavailable) and Headphones (plugged in).&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Removed and reinstalled AlsaMixer and PulseAudio&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Fast dispatcher is set to Run = no&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I'm by no means a developer and have gotten this far in the installation through trial and error and lots of searching, so if more detail or information is needed, please let me know.&lt;/p&gt;&#xA;&lt;p&gt;Any thoughts to resolve would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23799" LastActivityDate="2020-10-02T17:27:02.127" Title="Headphones not working" Tags="|dual-boot|sound|audio|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25547" PostTypeId="1" CreationDate="2020-08-27T01:02:27.043" Score="0" ViewCount="103" Body="&lt;p&gt;I am running EOS 5.1 in VirtualBox (also has it on a Laptop but I usually use VirtualBox to test upgrades before applying to Laptop).&lt;/p&gt;&#xA;&lt;p&gt;See Keyboard -&amp;gt; Shortcuts have valid values before update:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9mE9N.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9mE9N.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I checked App Center there was a Keyboard 2.3.6 update.  I clicked Update.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qN0sE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qN0sE.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Immediately afterwards, Keyboard -&amp;gt; Shortcuts are completely Disabled.  No way to re-enable them!&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AyhPU.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AyhPU.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Is this happening only to VirtualBox VM?&lt;/p&gt;&#xA;&lt;p&gt;If this happens to bare metal it would be a very serious problem.&lt;/p&gt;&#xA;" OwnerUserId="23617" LastActivityDate="2024-03-11T02:03:30.407" Title="Very Serious Keyboard App Bug - Shortcuts Disabled" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25548" PostTypeId="1" CreationDate="2020-08-27T01:12:12.803" Score="0" ViewCount="79" Body="&lt;p&gt;I paid for, and downloaded, a copy of the elementary image file, but during the process of creating a bootable USB, I discovered that I needed to be root user and that the .iso had to be in the root directory.&lt;/p&gt;&#xA;&lt;p&gt;I am using Ubuntu 20.04, which creates me as a non-privileged user. Inadvertantly, I deleted the elementary .iso using the Command Line Interface (CLI), thinking I could find it in the the Trash bin and move it to the root user account (foolish, I know); I cannot and the .iso file is now irretrievable.&lt;/p&gt;&#xA;&lt;p&gt;As deserving as elementaryos is, I would rather not pay again (I didn't check the 'remember me' box); so, is there a way I can re-download a copy, having already paid for one?&lt;/p&gt;&#xA;&lt;p&gt;Also, the installation of Unebootin requires the user (me) to be root in order to install and run the program. When I did run the program and tried to select the .iso file, I could not navigate from '/' (root) in order to make selection. It is proving difficult to install the operating system, particularly as, Unebootin has not updated its procedure for download and installation. Here, I would also appreciate some help.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="23803" LastActivityDate="2021-09-21T19:07:45.813" Title="How do I get another copy of elementaryos.iso?" Tags="|software-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25549" PostTypeId="2" ParentId="25547" CreationDate="2020-08-27T01:18:17.560" Score="0" Body="&lt;p&gt;Found issue reported at:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-keyboard/issues/317&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-keyboard/issues/317&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I will follow the issue at github.&lt;/p&gt;&#xA;&lt;p&gt;This post can be treated as Answered.&lt;/p&gt;&#xA;" OwnerUserId="23617" LastActivityDate="2020-08-27T01:18:17.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25550" PostTypeId="1" AcceptedAnswerId="25552" CreationDate="2020-08-27T07:44:47.130" Score="0" ViewCount="47" Body="&lt;p&gt;I've read a lot of articles and watched videos, it is still not clear to me. Kindly provide some simple instructions and steps that I can directly follow.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-08-27T08:19:33.920" Title="How do I install Elementary OS in my SSD and use my HDD ase the home folder to store all other files like documents, media and games?" Tags="|system-installation|system|ssd|hdd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25551" PostTypeId="1" CreationDate="2020-08-27T07:53:19.803" Score="0" ViewCount="31" Body="&lt;p&gt;My laptop keeps freezing after a few minutes of use, when selecting the dedicated Nvidia GPU, I am&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -c video                                                                                                                                               &#xA;*-display UNCLAIMED       &#xA;   description: VGA compatible controller&#xA;   product: GM206M [GeForce GTX 965M]&#xA;   vendor: NVIDIA Corporation&#xA;   physical id: 0&#xA;   bus info: pci@0000:01:00.0&#xA;   version: a1&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pm msi pciexpress vga_controller bus_master cap_list&#xA;   configuration: latency=0&#xA;   resources: memory:dc000000-dcffffff memory:b0000000-bfffffff memory:c0000000-c1ffffff ioport:e000(size=128) memory:dd000000-dd07ffff&#xA;*-display&#xA;   description: VGA compatible controller&#xA;   product: HD Graphics 530&#xA;   vendor: Intel Corporation&#xA;   physical id: 2&#xA;   bus info: pci@0000:00:02.0&#xA;   version: 06&#xA;   width: 64 bits&#xA;   clock: 33MHz&#xA;   capabilities: pciexpress msi pm vga_controller bus_master cap_list rom&#xA;   configuration: driver=i915 latency=0&#xA;   resources: irq:131 memory:db000000-dbffffff memory:60000000-7fffffff ioport:f000(size=64) memory:c0000-dffff&#xA;sudo ubuntu-drivers devices                                                                                                                                      &#xA;== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==&#xA;modalias : pci:v000010DEd00001427sv00001558sd00006400bc03sc00i00&#xA;vendor   : NVIDIA Corporation&#xA;model    : GM206M [GeForce GTX 965M]&#xA;driver   : nvidia-driver-390 - distro non-free&#xA;driver   : nvidia-driver-435 - distro non-free&#xA;driver   : nvidia-driver-440 - distro non-free&#xA;driver   : nvidia-driver-440-server - distro non-free recommended&#xA;driver   : nvidia-driver-418-server - distro non-free&#xA;driver   : xserver-xorg-video-nouveau - distro free builtin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I installed the recommended nvidia-driver-440-server.&lt;/p&gt;&#xA;&lt;p&gt;Is this issue known/solved? Let me know which other info I should provide.&lt;/p&gt;&#xA;" OwnerUserId="23285" LastActivityDate="2020-08-27T07:53:19.803" Title="GeForce GTX 965M - eOS 5.1.7 Hera - Freeze" Tags="|release-hera|graphics|nvidia-driver|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25552" PostTypeId="2" ParentId="25550" CreationDate="2020-08-27T08:13:39.773" Score="0" Body="&lt;p&gt;There is a couple of ways you can do this!&lt;/p&gt;&#xA;&lt;p&gt;The easiest way, if you don't want to manually partition your drives at install, is to remove the folders Downloads, Pictures, Videos etc. from /home and make new ones on your HDD and copy them as links to your /home directory (copy as links shows up when you right click on the folders), after that you have to manually drag the folders to the sidebar in files app if you want them to be shown there, if you do it like this your system files (hidden files) will still be on the SSD and everything you save will be on the HDD.&lt;/p&gt;&#xA;&lt;p&gt;The caveat with this method is that you will lose your configs and so on if your system fatally crashes for some reason!&lt;/p&gt;&#xA;" OwnerUserId="23807" LastEditorUserId="23807" LastEditDate="2020-08-27T08:19:33.920" LastActivityDate="2020-08-27T08:19:33.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25557" PostTypeId="1" CreationDate="2020-08-27T11:40:18.520" Score="0" ViewCount="193" Body="&lt;p&gt;I'm new to linux, I have just installed it few days ago next to Win10. Everything seems perfect, but I'm always losing wifi connection after a few minutes. In windows it works good.&lt;/p&gt;&#xA;&lt;p&gt;uname -r &lt;br/&gt;5.4.0-42-generic&lt;/p&gt;&#xA;&lt;p&gt;lspci | grep 'Network'&lt;br/&gt;&#xA;07:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)&lt;/p&gt;&#xA;&lt;p&gt;rfkill list&lt;br/&gt;&#xA;0: ideapad_wlan: Wireless LAN&lt;br/&gt;&#xA;Soft blocked: no&lt;br/&gt;&#xA;Hard blocked: no&lt;br/&gt;&#xA;1: ideapad_bluetooth: Bluetooth&lt;br/&gt;&#xA;Soft blocked: yes&lt;br/&gt;&#xA;Hard blocked: no&lt;br/&gt;&#xA;2: hci0: Bluetooth&lt;br/&gt;&#xA;Soft blocked: yes&lt;br/&gt;&#xA;Hard blocked: no&lt;br/&gt;&#xA;3: phy0: Wireless LAN&lt;br/&gt;&#xA;Soft blocked: no&lt;br/&gt;&#xA;Hard blocked: no&lt;br/&gt;&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have any solution to this?&lt;br /&gt;&#xA;Thx&lt;/p&gt;&#xA;" OwnerUserId="23811" LastActivityDate="2020-08-27T11:40:18.520" Title="Losing wifi connections after few minutes (qualcomm atheros qca9377 driver)" Tags="|wifi|" AnswerCount="0" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="25558" PostTypeId="2" ParentId="25527" CreationDate="2020-08-27T11:54:27.783" Score="1" Body="&lt;p&gt;after 2 day trying I fixed  it by:&lt;br/&gt;&#xA;my laptop webcam is &lt;em&gt;05ca:1839&lt;/em&gt; and the driver is &lt;strong&gt;r5u87x&lt;/strong&gt;.&lt;br/&gt;&#xA;so I did these steps:&lt;br/&gt;&#xA;&lt;code&gt;wget https://download1.rpmfusion.org/nonfree/fedora/development/rawhide/Everything/aarch64/os/Packages/r/r5u87x-firmware-0.2.0-15.a9b2171d762b.fc33.aarch64.rpm&lt;/code&gt;&lt;br/&gt;&#xA;for converting from rpm to deb &lt;br/&gt;&#xA;&lt;code&gt;sudo add-apt-repository universe&lt;/code&gt; &lt;br/&gt;&#xA;&lt;code&gt;sudo apt-get install alien&lt;/code&gt; &lt;br/&gt;&#xA;&lt;code&gt;sudo alien r5u87x-firmware-0.2.0-15.a9b2171d762b.fc33.aarch64.rpm&lt;/code&gt; &lt;br/&gt;&#xA;for installing deb file:&lt;br/&gt;&#xA;&lt;code&gt;sudo dpkg -i r5u87x-firmware_0.2.0-16_amd64.deb&lt;/code&gt;&lt;br/&gt;&#xA;adn &lt;code&gt;sudo apt-get install libglib*-dev libusb-dev build-essential gcc automake mercurial&lt;/code&gt;&lt;br/&gt;&#xA;for enabling&lt;br/&gt;&#xA;&lt;code&gt;xinput --list&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;xinput enable 7&lt;/code&gt;&lt;br/&gt;&#xA;and &lt;br/&gt;&#xA;&lt;code&gt;sudo modprobe -v uvcvideo&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;sudo modprobe uvcvideo&lt;/code&gt;&lt;br/&gt;&#xA;restart and enjoy.&lt;/p&gt;&#xA;" OwnerUserId="23770" LastEditorUserId="26" LastEditDate="2021-04-11T22:43:49.967" LastActivityDate="2021-04-11T22:43:49.967" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25561" PostTypeId="2" ParentId="25548" CreationDate="2020-08-27T16:56:14.593" Score="1" Body="&lt;p&gt;I have seen this question a few times, not necessarily on SE. I don't think the site is intentionally deceptive, I just think people don't realize they can pay nothing and download the operating system for free.&lt;/p&gt;&#xA;&lt;p&gt;Where it has custom amount, where you can pay where you want, enter 0.00 there. See the picture:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/URkTV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/URkTV.png&quot; alt=&quot;pay what you want&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And then click to download it. You'll get this screen:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QbiKl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QbiKl.png&quot; alt=&quot;start the download&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Just click to download. If you click on the 'magnet' then you'll download it with a torrent client and it will automatically verify the download for you.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-08-27T16:56:14.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25563" PostTypeId="2" ParentId="14367" CreationDate="2020-08-28T15:44:53.483" Score="0" Body="&lt;p&gt;I do most of mine in the file manager GUI, but basically the same:&lt;/p&gt;&#xA;&lt;p&gt;Create a directory Sophos in the Downloads folder&lt;/p&gt;&#xA;&lt;p&gt;Download the .tgz file into the folder&lt;/p&gt;&#xA;&lt;p&gt;Right click on the downloaded .tgz file and extract it.&lt;/p&gt;&#xA;&lt;p&gt;Go into the terminal and navigate to the extracted folder:&lt;/p&gt;&#xA;&lt;p&gt;cd Downloads/Sophos/sophos-av&lt;/p&gt;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&lt;p&gt;sudo sh ./install.sh&lt;/p&gt;&#xA;&lt;p&gt;Follow the prompts and answer where required.  I think picking the free version is not a default so watch out for that.&lt;/p&gt;&#xA;&lt;p&gt;When you are finished run:&lt;/p&gt;&#xA;&lt;p&gt;sudo /opt/sophos-av/bin/savupdate&lt;/p&gt;&#xA;&lt;p&gt;Wait for it to finish.&lt;/p&gt;&#xA;&lt;p&gt;It's a good anti-virus but I found it created a little lag in my system so I turn off the service when I am not scanning.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2020-08-28T15:44:53.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25564" PostTypeId="1" AcceptedAnswerId="25653" CreationDate="2020-08-28T17:11:42.223" Score="0" ViewCount="32" Body="&lt;p&gt;I want to install Elementary Hera on a new build using a 3700x, 1660ti, and a gigabyte b550i motherboard. On my first attempt, the install went completely fine. But I had no wireless or wired internet connection. Any thoughts on how to correct this? Do I need to manually install Realtek ethernet drivers?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="23821" LastActivityDate="2020-09-11T23:52:22.800" Title="no lan port detected" Tags="|release-hera|wifi|networking|" AnswerCount="1" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25566" PostTypeId="1" CreationDate="2020-08-28T18:10:33.677" Score="1" ViewCount="133" Body="&lt;p&gt;Anyone having Graphics glitch after unlocking from lock screen? This issue started just since last two days only, If I restart PC everything works perfectly until I lock the screen. I know this is probably related to Nvidia but anyone having a similar issue? I'm using GTX 1050ti&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2yvhd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2yvhd.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;At first I thought this may be related to chrome but this happens across all applications.&lt;/p&gt;&#xA;&lt;p&gt;Thank you,&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-08-28T18:10:33.677" Title="Graphics glitch after unlock from lock screen" Tags="|nvidia|graphics|nvidia-driver|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25567" PostTypeId="1" AcceptedAnswerId="25602" CreationDate="2020-08-28T19:42:31.350" Score="0" ViewCount="45" Body="&lt;p&gt;Is there a way to set or enable auto update for apps and system packages? While I'm personally fine with clicking on update notification each time when update is available, problem is that my mom will never click on anything outside a web browser and I dont want to maintain continuously one more PC in my household :P&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-02T08:38:01.707" Title="Possibility of packages autoupdate" Tags="|updates|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25568" PostTypeId="1" CreationDate="2020-08-29T09:22:04.380" Score="0" ViewCount="39" Body="&lt;p&gt;I'm new to the subject an installed elementaryOS on a pretty old (1,8 GHz single processor) WinXP computer. So far everything worked fine for a few days.&lt;/p&gt;&#xA;&lt;p&gt;Now when I try to boot Windows, I chose Windows in the grub list but it just flips back to elementary, which I can boot.&lt;/p&gt;&#xA;&lt;p&gt;Tried supergrub2, it finds the Windows partiton, but also doesn't boot it.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&lt;p&gt;sven&lt;/p&gt;&#xA;&lt;p&gt;PS: and suddenly I can't answer here any more, only editing works.&#xA;Well the problem is solved, I somehow destroyed the windows boot sector. Testdisk was able to fix the problem. Made a CD with gparted which included testdisk. And changed from elementary to linuxlite ...&lt;/p&gt;&#xA;" OwnerUserId="23824" LastEditorUserId="23824" LastEditDate="2020-09-02T13:57:16.003" LastActivityDate="2024-01-15T19:02:50.320" Title="solved, suddenly no more dual boot" Tags="|release-hera|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25571" PostTypeId="1" CreationDate="2020-08-30T01:11:38.813" Score="0" ViewCount="79" Body="&lt;p&gt;Can you read this?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hC2jT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hC2jT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I can't. It hurts my eyeballs. I have a default system with default settings in an otherwise gorgeous oasis of visual goodness.&lt;/p&gt;&#xA;&lt;p&gt;I just want to type the subdirectory name and run whatever &amp;quot;dir /s&amp;quot; is in linux.  But I can't read the folder names.&lt;/p&gt;&#xA;&lt;p&gt;I asked the internet.  They had me mucking around with I don't even know what I probably sparked a small war in Uganda but it changed exactly zero when I launched terminal.&lt;/p&gt;&#xA;&lt;p&gt;All the threads in here are like &amp;quot;jump over a 12 ft fence with green underware on and don't forget your purple hat and heart-printed socks&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;I'm like &amp;quot;dude, there is no reason this should be anyone's default under any blue sky, starry night, or torrential rain on this lovely planet of ours&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;please please please&lt;/p&gt;&#xA;&lt;p&gt;there are daily updates to this system&lt;/p&gt;&#xA;&lt;p&gt;please fix this nightmare default in one of them&lt;/p&gt;&#xA;&lt;p&gt;I'm begging you, please&lt;/p&gt;&#xA;" OwnerUserId="23724" LastActivityDate="2024-02-13T05:06:50.943" Title="Enhancement Request: Readable Terminal Color Schema" Tags="|pantheon-terminal|color-format|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25572" PostTypeId="1" CreationDate="2020-08-30T02:05:27.527" Score="0" ViewCount="232" Body="&lt;p&gt;ElementaryOS 5.1.7 Hera plus whatever daily updates since the Fri Aug 28th drop. //&#xA;default file manager (I think it's just called Files)&lt;/p&gt;&#xA;&lt;p&gt;The first time it happened I had opened &amp;quot;New Window As Administrator&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Bug1:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;The reason I had done that was because I was copying a folder structure from one external drive to another and I figured out that only in the Administrator variation was I able to see a progress window.&lt;/p&gt;&#xA;&lt;p&gt;The non-admin universe provides no progress window, no error reporting, and no way to know if it's done.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Bug2:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Copying a folder structure only works if it's not &amp;quot;too big&amp;quot;.  (admin or non-admin mode)&lt;/p&gt;&#xA;&lt;p&gt;I can drag/drop the folders one by one, and if I'm lucky, they are all small enough that they won't just stop in the middle with no error reporting. (admin or non-admin mode)&lt;/p&gt;&#xA;&lt;p&gt;Which really messes up any &amp;quot;drag/drop, say &amp;quot;yes to all&amp;quot; a few times, go to bed, everything happily copied by morn'.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;It's &amp;quot;spend inordinate amts of time tracking down what copied and what didn't and trying again hoping maybe this time life would be happy and wonderful.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;(Have yet to run across any sort of error logging system.)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Bug3:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Notifications from the Files app aren't helpful if you're needing to drag/drop multiple file structures at a time.&lt;/p&gt;&#xA;&lt;p&gt;steps&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;open 2 windows - to and from&lt;/li&gt;&#xA;&lt;li&gt;drag toFld\folder1, drop it to &amp;quot;to&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;drag toFld\folder2, drop it to &amp;quot;to&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;do this for a bunch of folders&lt;/li&gt;&#xA;&lt;li&gt;walk away and eat some delicious food&lt;/li&gt;&#xA;&lt;li&gt;return&lt;/li&gt;&#xA;&lt;li&gt;get all excited at the red notification indicator&lt;/li&gt;&#xA;&lt;li&gt;get all sad that they all say &amp;quot;copy completed&amp;quot; and you can't tell which ones works, if any of them failed&lt;/li&gt;&#xA;&lt;li&gt;spend the next bit of your life laboriously checking each folder one by one to see if the &amp;quot;Properties&amp;quot; #files/totalSize match&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Bug4:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Search sends Files into lala land.&lt;/p&gt;&#xA;&lt;p&gt;I am usually searching an external drive.  It's a 2terabye drive, but only has maybe .5 terabytes used.&lt;/p&gt;&#xA;&lt;p&gt;Some times it's happier than others.  Sometime's its just taking a while.  Other times it's gone into a coma.&lt;/p&gt;&#xA;&lt;p&gt;4a: there is no visual indicator to help me understand &amp;quot;I'm still thinking&amp;quot; vs &amp;quot;nothing was found&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;4b: but in recent iterations of ElementaryOS it more often than not locks up that window, and other open Files windows, and any new Files windows&lt;/p&gt;&#xA;&lt;p&gt;The first time I encountered this I had opened it in Administrator mode.  Non-admin mode continued to work, but by the end of the day, I had to give up and reboot to close the Admin-Mode Files window.&lt;/p&gt;&#xA;&lt;p&gt;Now it's happening in non-admin mode as well.&lt;/p&gt;&#xA;&lt;p&gt;Granted, I have never found a stable File Manager in linux.  And some of the ones in the AppCenter don't even launch (non-curated, so not entirely unexpected).  I know everyone just hops on over to the terminal and runs their fancy commands.&lt;/p&gt;&#xA;&lt;p&gt;I am open to learning the fancy commands, I do look them up.  But as reported in a separate question, the current state of the terminal colors makes it impossible to do that.&lt;/p&gt;&#xA;&lt;p&gt;I love so many things about ElementaryOS.  I don't want boot to DOS and run &amp;quot;dir /s&amp;quot;.  No no no!&lt;/p&gt;&#xA;&lt;p&gt;My Questions Are This:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Is there a known stable version of ElementaryOS?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;It's entirely possible I have myself accidentally mixed up in a dev / fast iteration version of a linux universe.&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Is there a known stable File Manager that will handle bulkier file operations and play happily in the Elementary OS universe?  (so far the AppCenter isn't bringing what I'm looking for // entirely possible I'm using DOS terms in a linux universe and don't know what to call things)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&amp;quot;bulkier&amp;quot; = I frequently have several &amp;quot;Files&amp;quot; windows and tabs open, across multiple &amp;quot;multitasking views&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;&amp;quot;bulkier&amp;quot; = I frequently search a larger drive for stuff&lt;/li&gt;&#xA;&lt;li&gt;&amp;quot;bulkier&amp;quot; = I frequently move large files and extensive folder structures around&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I know bugs don't always make it to the &amp;quot;verified to exist, deemed important enough to spend time on, tested and ready to ship&amp;quot; phase.&lt;/p&gt;&#xA;&lt;p&gt;I know it's entirely possible I am the only person on the planet ADHD'ing their way through life,  not &amp;quot;living in the cloud&amp;quot; and/or all of this sounds like a cavewoman rolling rocks up a hill.  I do multiple things at once and have lots of old gear trying to talk to lots of other old gear.  It's just my world right now.&lt;/p&gt;&#xA;" OwnerUserId="23724" LastActivityDate="2024-01-13T05:00:30.050" Title="Bugs: File Manager (4 problems that may be actual bugs in the Files application)" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25573" PostTypeId="1" CreationDate="2020-08-30T04:17:18.140" Score="0" ViewCount="146" Body="&lt;p&gt;New to Linux. Short story is I didn't bother verifying my ISO due to it being downloaded directly off of Elementary's site and now I'm wondering if this was a mistake. Post installation is there any way to verify the integrity of this install? Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="23829" LastActivityDate="2021-07-23T00:38:38.810" Title="I have not verified my ISO...is there anything I can do other than reinstall?" Tags="|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25574" PostTypeId="1" CreationDate="2020-08-30T06:32:15.540" Score="0" ViewCount="49" Body="&lt;p&gt;I want hide some applications from menu, but leave it searchable from search field in app menu.&#xA;This beheavior is similar to Onboard application. Which icon not visible on menu, but may be find with search field.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cQnvi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cQnvi.png&quot; alt=&quot;screenshot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23830" LastActivityDate="2020-10-02T02:03:15.357" Title="Can I hide some applications from menu, but leave it searchable?" Tags="|release-hera|slingshot|menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25576" PostTypeId="2" ParentId="25572" CreationDate="2020-08-30T13:40:39.777" Score="0" Body="&lt;p&gt;I am no expert, but in the multiverse of Linux distros, being able to manage files via the SHELL is probably your best option. Graphical User Interfaces (GUIs) come only so-close to peforming at the level of the Command Line Interface (CLI); a GUI would be unwieldy were it to contain all the possible commands available on the CLI.&lt;/p&gt;&#xA;&lt;p&gt;Very simplistically, the Shell is a layer above the kernel; the kernel executes commands that runs the various aspects of the operating system; the CLI is the means by which communication with the kernel is facilitated externally. You are communicating directly with the brain.&lt;/p&gt;&#xA;&lt;p&gt;There is a bit of a learning curve where SHELL scripting is concerned, but it is, by far, the most efficient way of managing files, directories, devices - a computer - if you have some knowledge, know what you are doing and are careful. There are no warnings; the shell assumes you know what you are doing.&lt;/p&gt;&#xA;&lt;p&gt;In the meantime, you might try moving smaller sizes of data until all data is where you want them located; it might increase the overall time of file transfer, but it may also be more successful.&lt;/p&gt;&#xA;" OwnerUserId="23804" LastActivityDate="2020-08-30T13:40:39.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25577" PostTypeId="2" ParentId="25571" CreationDate="2020-08-30T14:54:28.337" Score="0" Body="&lt;p&gt;I have yet to try this, but if one installs 'elementary tweaks' from the CLI, then navigate to 'settings -&amp;gt; Tweaks -&amp;gt; Terminal', one should be able to select a colour theme.&lt;/p&gt;&#xA;&lt;p&gt;EDIT:&#xA;I tried out 'elementary tweaks'. Firstly, one is required to install a repository in order to access a Personal Package Archive (PPA), from which, to install 'elementary-tweaks'. Taking these first steps is at one's own discretion; the software is not part of Ubuntu's official distribution. Taking those steps, one will find the installation in 'System Settings -&amp;gt; Personal -&amp;gt; tweaks'. Clicking on 'Terminal' in the sidebar reveals options available to modify the Terminal, one of which is to change the background colour.&lt;/p&gt;&#xA;&lt;p&gt;An alternative is Gogh, found at &lt;a href=&quot;http://mayccoll.github.io/Gogh/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://mayccoll.github.io/Gogh/&lt;/a&gt; (note the hypertext protocol is not current, i.e., secure). However, it provides many colour themes to choose from and is simple to implement.&lt;/p&gt;&#xA;&lt;p&gt;The issue you are experiencing, where there is a block of Green and text within it being difficult to read, cannot be changed to any great extent; through careful choice of theme, you should find one that has good contrast and readability.&lt;/p&gt;&#xA;" OwnerUserId="23804" LastEditorUserId="23804" LastEditDate="2020-08-30T17:30:49.557" LastActivityDate="2020-08-30T17:30:49.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25578" PostTypeId="2" ParentId="25572" CreationDate="2020-08-30T18:18:08.407" Score="0" Body="&lt;p&gt;It is known that Files has never been really suitable for handling large file transfers (I think most of your issues all relate to those) at least partly due to it maintaining an undo stack which gets increasingly inefficient with large numbers of files processed.  There also some outstanding regressions in particular to do with progress handling which hopefully will be fixed. I would strongly recommend using specialist gui apps like grsync for moving/backing up large numbers of files.&lt;/p&gt;&#xA;&lt;p&gt;The search facility also struggles with large volumes especially as it does not display results until the search is finished. Specialist gui apps like catfish (Gnome) or kfind (KDE) may help.&lt;/p&gt;&#xA;&lt;p&gt;Do report issues at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; (after checking that they have not already been reported - many have).  Contributions of fixes from any developers are encouraged.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-08-30T18:18:08.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25580" PostTypeId="1" CreationDate="2020-08-30T22:49:40.940" Score="0" ViewCount="247" Body="&lt;p&gt;I have installed elementaryOS Hera on a MacBook. The issue is that it is not possible to take a screenshot using the shortcut 'print' key, because MacBooks do not have a 'print' key. Instead, I have to use 'Shift+cmd+3, or Shift+cmd+4. They do not work.&lt;/p&gt;&#xA;&lt;p&gt;I tried using shell commands to take a screenshot &lt;code&gt;~$ sudo screenshot-tools -r&lt;/code&gt; and &lt;code&gt;~$ screenshot-tools -rc&lt;/code&gt;, but they did not work either, because &lt;em&gt;screenshot-tools&lt;/em&gt; cannot be located in the repository and I'm not entirely sure of the app's name to install it.&lt;/p&gt;&#xA;&lt;p&gt;Essentially, I need to find a way to map the three-keys function of the MacBook to the screenshot Keyboard shortcut of Hera, to enable the facility. I can find no information on how I might map the MacBook screenshot keys to the Hera screenshot because there is no translation or comparison to Windows-compatible laptops, or else, I would use the ASCII (or Unicode) character codes to complete the task.&lt;/p&gt;&#xA;&lt;p&gt;I would greatly appreciate some help here. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="23804" LastActivityDate="2024-03-08T16:27:14.240" Title="How can I take a screenshot with eOS installed on a MacBook?" Tags="|keyboard-shortcuts|screenshot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25581" PostTypeId="1" CreationDate="2020-08-30T23:10:14.407" Score="0" ViewCount="155" Body="&lt;p&gt;E: 'http://ppa.launchpad.net/cybre/elementaryplus/ubuntu bionic Release' deposunda Release dosyası yok.&#xA;W: Böyle bir depodan güvenli bir şekilde güncelleme yapılamaz, bu nedenle depo devre dışı bırakılmıştır.&#xA;W: Depo oluşturma ve kullanıcı yapılandırması hakkında ayrıntılı bilgi için apt-secure(8) rehber sayfasında bulunabilir&lt;/p&gt;&#xA;" OwnerUserId="23834" LastActivityDate="2024-02-05T14:05:30.627" Title="sudo apt-get update problem" Tags="|ppa|sudo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25583" PostTypeId="1" CreationDate="2020-08-31T09:38:35.283" Score="0" ViewCount="118" Body="&lt;p&gt;I installed Elementary OS and the wifi was working initially. Then i started using my bluetooth earphones and the internet started cutting off. After restart, the wifi has completely disappeared with just the Wired Connection available. Any ideas on how to get Wifi back?&lt;/p&gt;&#xA;&lt;p&gt;Result of rfkill list all:&lt;/p&gt;&#xA;&lt;p&gt;0: hci0: Bluetooth&#xA;Soft blocked: no&#xA;Hard blocked: no&lt;/p&gt;&#xA;&lt;p&gt;Result of: sudo lshw -c network&#xA;*-network&lt;br /&gt;&#xA;description: Ethernet interface&#xA;product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;vendor: Realtek Semiconductor Co., Ltd.&#xA;physical id: 0&#xA;bus info: pci@0000:02:00.0&#xA;logical name: enp2s0&#xA;version: 10&#xA;serial: 68:f7:28:10:b0:a5&#xA;size: 100Mbit/s&#xA;capacity: 1Gbit/s&#xA;width: 64 bits&#xA;clock: 33MHz&#xA;capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;configuration: autonegotiation=on broadcast=yes driver=r8169 duplex=full firmware=rtl8168g-3_0.0.1 04/23/13 ip=192.168.1.7 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s&#xA;resources: irq:32 ioport:2000(size=256) memory:90a04000-90a04fff memory:90a00000-90a03fff&lt;/p&gt;&#xA;" OwnerUserId="23837" LastActivityDate="2024-02-06T05:06:25.777" Title="My Wifi is not woking" Tags="|wifi|" AnswerCount="2" CommentCount="0" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25584" PostTypeId="1" CreationDate="2020-08-31T10:48:44.580" Score="2" ViewCount="463" Body="&lt;p&gt;What is the difference between server and non-server?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DGQBG.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DGQBG.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16104" LastActivityDate="2020-08-31T10:48:44.580" Title="Difference between Nvidia normal drivers and server drivers?" Tags="|release-hera|appcenter|graphic-drivers|nvidia|nvidia-driver|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25586" PostTypeId="2" ParentId="25485" CreationDate="2020-08-31T13:35:49.363" Score="0" Body="&lt;p&gt;TRY ubuntu 20.04 and turn on internet while installing ubuntu, it will install all the drivers and best kernel suited to your need&lt;/p&gt;&#xA;" OwnerUserId="23840" LastActivityDate="2020-08-31T13:35:49.363" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25587" PostTypeId="2" ParentId="24874" CreationDate="2020-08-31T15:23:03.087" Score="0" Body="&lt;p&gt;the PrefersColorScheme solution worked to me. Thanks!&#xA;the dark theme turned to light after several system updates.&#xA;I remember I turned the dark theme on under the system settings panel, now the option it's not there anymore. Anyone knows why? I am running 5.1.7 Hera&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2020-08-31T15:23:03.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25588" PostTypeId="2" ParentId="23966" CreationDate="2020-08-31T16:30:11.650" Score="3" Body="&lt;p&gt;Under System-Settings -&amp;gt; Language &amp;amp; Region -&amp;gt; Keyboard Settings -&amp;gt; Input Method -&amp;gt; (Plus Sign)&lt;/p&gt;&#xA;&lt;p&gt;Then you can use whichever shortcut you prefer to switch between layouts/engines. Default is Ctrl+Space.&lt;/p&gt;&#xA;&lt;p&gt;Hit it twice and you'll see the two keyboard layouts. It will auto-hide if selected as option.&lt;/p&gt;&#xA;&lt;p&gt;You will also need the Layout changed. Under Keyboard Settings, use the Plus sign (bottom left) to add the English US, it will then bring you to a sub-list of the English US keyboards. There's multiple options for dvorak, left, right, balanced, etc.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="23627" LastEditorUserId="23627" LastEditDate="2020-09-01T12:15:56.390" LastActivityDate="2020-09-01T12:15:56.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25589" PostTypeId="2" ParentId="25571" CreationDate="2020-08-31T18:55:47.363" Score="0" Body="&lt;p&gt;You might want to look into Darcula:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://draculatheme.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://draculatheme.com/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here is an example of how it looks in Gnome Terminal:&#xA;&lt;a href=&quot;https://draculatheme.com/gnome-terminal/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://draculatheme.com/gnome-terminal/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23831" LastActivityDate="2020-08-31T18:55:47.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25590" PostTypeId="2" ParentId="25583" CreationDate="2020-08-31T20:16:31.610" Score="0" Body="&lt;p&gt;When you run &lt;code&gt;~$ sudo dmesg&lt;/code&gt;, you will get a log of all processes. If there are any problems with particular processes, they should show up in RED. Less critical processes that may be problematic are shown in bold-type.&lt;/p&gt;&#xA;&lt;p&gt;It may be that the network card has stopped working.  If so, it may be highlighted in RED. Note what it says, as it also provides information on how to resolve the problem. Your exact network card (ethernet interface) model should be in the detail provided.&lt;/p&gt;&#xA;&lt;p&gt;The log may suggest you go to &lt;a href=&quot;https://wireless.wiki.kernel.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wireless.wiki.kernel.org/&lt;/a&gt; to search for, and download, the exact driver you require. Finding it is relatively easy; finding the download page is a little more difficult, but possible.&lt;/p&gt;&#xA;&lt;p&gt;An alternative would be to execute &lt;code&gt;~$ sudo apt install linux-firmware-nonfree&lt;/code&gt;. No harm should come to your system. Reboot and check that the you can connect to WI-FI.&lt;/p&gt;&#xA;" OwnerUserId="23804" LastActivityDate="2020-08-31T20:16:31.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25591" PostTypeId="1" CreationDate="2020-08-31T23:40:45.167" Score="1" ViewCount="63" Body="&lt;p&gt;It's a simple question: Elementary 6 would upgrade easily from 5 (hera)? This is the biggest problem to use Elementary.&lt;/p&gt;&#xA;" OwnerUserId="23841" LastActivityDate="2020-08-31T23:40:45.167" Title="Elementary 6 would upgrade easily from 5 (hera)?" Tags="|release-hera|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25593" PostTypeId="1" CreationDate="2020-09-01T11:33:33.660" Score="2" ViewCount="50" Body="&lt;p&gt;I am trying to write a shell script that automates the setup of my Elementary distro so I can quickly reinstall everything on a new machine. As such I am looking to see how I can set the default browser from within a shell script, preferable without user input. Thanks!&#xA;Luke&lt;/p&gt;&#xA;" OwnerUserId="23844" LastActivityDate="2020-10-01T18:00:30.083" Title="How to set the default browser from within a shell script" Tags="|applications|pantheon-terminal|shell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25594" PostTypeId="2" ParentId="25287" CreationDate="2020-09-01T12:12:55.910" Score="0" Body="&lt;p&gt;Please expose all usability issues you find to the &lt;a href=&quot;https://github.com/elementary/stylesheet/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary theme’s bug tracker&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="784" LastActivityDate="2020-09-01T12:12:55.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25595" PostTypeId="2" ParentId="25568" CreationDate="2020-09-01T12:21:11.040" Score="0" Body="&lt;p&gt;In your etc grub config, where is the default boot device pointing? What number selection is your default boot device? There is usually a number that tells grub to default if there is more than one boot device.&lt;/p&gt;&#xA;&lt;p&gt;Did you also do sudo grub update after editing the configs? Happened to me where I updated mint, eOS and pointed to wrong name :P&lt;/p&gt;&#xA;" OwnerUserId="23627" LastActivityDate="2020-09-01T12:21:11.040" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25596" PostTypeId="1" CreationDate="2020-09-01T17:24:54.127" Score="0" ViewCount="50" Body="&lt;p&gt;I am looking to create a script that automatically sets up Elementary exactly how I want it. I have not yet figured out how to set the keyboard shortcuts via the command line, specifically the short cuts to open the browser and open email.&#xA;Thanks!&#xA;Luke&lt;/p&gt;&#xA;" OwnerUserId="23844" LastActivityDate="2024-01-16T00:06:50.813" Title="How to change keyboard shortcut settings from the terminal" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25597" PostTypeId="2" ParentId="25593" CreationDate="2020-09-01T17:26:47.753" Score="2" Body="&lt;p&gt;I found this could be done with&#xA;xdg-settings set default-web-browser brave-browser.desktop&lt;/p&gt;&#xA;&lt;p&gt;where brave-browser.desktop is the desktop file of the desired browser&lt;/p&gt;&#xA;" OwnerUserId="23844" LastActivityDate="2020-09-01T17:26:47.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25598" PostTypeId="2" ParentId="17301" CreationDate="2020-09-01T20:06:02.223" Score="0" Body="&lt;p&gt;I have an IdeaPad S145 and I think it's possible that the touchpad be the same.&#xA;This post worked for me.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1227972/touchpad-of-lenovo-ideapad-s145-15iil-not-detected-in-18-04-and-19-10-ubuntu-an&quot;&gt;https://askubuntu.com/questions/1227972/touchpad-of-lenovo-ideapad-s145-15iil-not-detected-in-18-04-and-19-10-ubuntu-an&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The workaround is to pass these parameters to the kernel.&#xA;&#xA;i8042.nopnp=1 pci=nocrs&#xA;&#xA;It's recommended to test before change definitely like this.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.ubuntu.com/Kernel/KernelBootParameters&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.ubuntu.com/Kernel/KernelBootParameters&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Good luck.&lt;/p&gt;&#xA;" OwnerUserId="12891" LastActivityDate="2020-09-01T20:06:02.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25599" PostTypeId="1" CreationDate="2020-09-01T20:41:02.830" Score="0" ViewCount="42" Body="&lt;p&gt;I am beginner and last time I didn't make any configuration or change&#xA;When I got stuck I just force shutdown my laptop and I could've never start anything&#xA;&lt;a href=&quot;https://i.stack.imgur.com/IrWec.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IrWec.jpg&quot; alt=&quot;start logo&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23847" LastActivityDate="2020-09-01T20:41:02.830" Title="Stuck at welcome logo whenever I try to start" Tags="|boot|dual-boot|startup|black-screen|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25600" PostTypeId="2" ParentId="25574" CreationDate="2020-09-02T01:47:48.507" Score="1" Body="&lt;p&gt;You can achieve this by editing the corresponding *.desktop files, or the easiest way is to use an app called AppEditor, you can find it in appCenter. Just uncheck 'show in launcher' and save.&lt;/p&gt;&#xA;" OwnerUserId="12483" LastActivityDate="2020-09-02T01:47:48.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25602" PostTypeId="2" ParentId="25567" CreationDate="2020-09-02T08:38:01.707" Score="0" Body="&lt;p&gt;Have a look at &lt;a href=&quot;https://help.ubuntu.com/community/AutoWeeklyUpdateHowTo&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;. Couple of options how do automatic package updates.&lt;/p&gt;&#xA;" OwnerUserId="9748" LastActivityDate="2020-09-02T08:38:01.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25603" PostTypeId="2" ParentId="25596" CreationDate="2020-09-02T12:47:33.300" Score="0" Body="&lt;p&gt;gsettings set org.gnome.settings-daemon.plugins.media-keys home &amp;quot;'f'&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Was the correct command&lt;/p&gt;&#xA;" OwnerUserId="23844" LastActivityDate="2020-09-02T12:47:33.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25605" PostTypeId="2" ParentId="25581" CreationDate="2020-09-02T19:45:37.330" Score="0" Body="&lt;p&gt;Appcenterdan bir ekran görüntüsü yükleyebilir misiniz? Daha önceleri Elementary os'u Türkçe dili ile kurmak Appcenter'da bazı kaynaklara erişimde soruna yol açmaktaydı.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21341/elementary-os-5-1-appcenter-few-application&quot;&gt;Elementary OS 5.1 Appcenter Few Application&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19639" LastActivityDate="2020-09-02T19:45:37.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25606" PostTypeId="2" ParentId="17026" CreationDate="2020-09-03T06:46:18.293" Score="1" Body="&lt;p&gt;One important thing is to make sure your Icon are not locked.&#xA;From the Behavior tab check if they are locked, then unlock them and then  drag  icons from dock to somewhere else.&lt;/p&gt;&#xA;" OwnerUserId="23855" LastEditorUserId="16827" LastEditDate="2020-09-05T12:43:31.033" LastActivityDate="2020-09-05T12:43:31.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25609" PostTypeId="1" CreationDate="2020-09-04T17:08:14.017" Score="0" ViewCount="212" Body="&lt;p&gt;I'm just finishing installing Elementary OS but I got a problem. Really, the problem was not on this installation, but it was on Linux Mint 20 update. I was running Linux Mint 20 and I got some system updates. When restarting, my laptop's keyboard is no working any longer. I tried with an external keyboard and it works ok. I assumed that it is a Linux Mint problem and I tried with Zorin OS and finally with Elementary OS. The result is the same: Laptop's keyboard is not working. Any idea about what's going on? I don't want to use an external keyboard. Hope somebody can help on this. Thank you very much. You all have a nice day.&lt;/p&gt;&#xA;" OwnerUserId="23863" LastActivityDate="2024-03-05T18:00:25.100" Title="Laptop's keyboard is not working" Tags="|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25615" PostTypeId="1" CreationDate="2020-09-05T20:12:03.300" Score="0" ViewCount="52" Body="&lt;p&gt;Hey I'm super new to Linux and I do not know how to turn the Wireless on, the Wifi has this wierd symbol kind of like a sideways Bluetooth icon with a cross over it, any ideas how to fix it? Even in my System Settings &amp;gt; Network there is Wired, but no WireLESS to be seen!!&lt;/p&gt;&#xA;&lt;p&gt;Please help!!&#xA;I am using a HP Laptop running the current latest version of EOS.&lt;/p&gt;&#xA;" OwnerUserId="23872" LastActivityDate="2021-10-04T11:06:00.517" Title="No Wireless, anywhere" Tags="|networking|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25617" PostTypeId="1" CreationDate="2020-09-05T22:26:32.890" Score="0" ViewCount="125" Body="&lt;p&gt;I am using an AMD rx570. I was using Ellesmere driver, but I tried updating it. Now when I reboot my computer all I see is a black screen (don't even see elementary startup logo).&lt;/p&gt;&#xA;&lt;p&gt;I am able to access tty so I ran some commands:&lt;/p&gt;&#xA;&lt;p&gt;I ran the command &lt;code&gt;lspci&lt;/code&gt; and see that I'm using Ellesmere with kernel driver amdgpu.&lt;/p&gt;&#xA;&lt;p&gt;I have also tried using init 5 but I get an error: &lt;code&gt;v412loopback: failed video_register_device&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Is there a way I can reset my driver?&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated&lt;/p&gt;&#xA;&lt;p&gt;Edit: Doesn't appear to be a gpu driver issue, I swapped out the gpu and still got the same issue. What other issue could prevent me from displaying the gui?&lt;/p&gt;&#xA;" OwnerUserId="23874" LastEditorUserId="23874" LastEditDate="2020-09-07T23:17:41.433" LastActivityDate="2024-01-21T04:08:20.977" Title="black screen on startup" Tags="|graphic-drivers|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25618" PostTypeId="2" ParentId="21147" CreationDate="2020-09-05T23:45:41.397" Score="0" Body="&lt;p&gt;imo (you need elementery tweaks for this, install that, come back here) pretty easy you'll find all you need at gnome-looks, if you specifically want Mac, here's a &lt;a href=&quot;https://www.gnome-look.org/p/1405530/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Big Sur GTK theme&lt;/a&gt; theme which I personally use&#xA;to install that you'll have to go into the home folder, right click and view hidden folders, put the contents of the file you downloaded into .themes, if it doesn't exist, create it,&#xA;Second, you're gonna get the &lt;a href=&quot;https://www.gnome-look.org/p/1400021/&quot; rel=&quot;nofollow noreferrer&quot;&gt;icons&lt;/a&gt;, go to home, .icons, if isnt there create it, and then go to settings, tweaks and apply, you can also find the wallpaper &lt;a href=&quot;https://www.pling.com/p/1413279/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, if you want to change cursors which I personally don't think is necessarily required, good luck guys.&lt;/p&gt;&#xA;" OwnerUserId="23876" LastActivityDate="2020-09-05T23:45:41.397" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25619" PostTypeId="2" ParentId="25617" CreationDate="2020-09-06T02:55:02.153" Score="0" Body="&lt;p&gt;Try running on nomodeset, then if it successfully boots, revert your changes.&lt;/p&gt;&#xA;&lt;p&gt;refer &lt;a href=&quot;https://www.dell.com/support/article/en-ph/sln306327/manual-nomodeset-kernel-boot-line-option-for-linux-booting?lang=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for adding nomodeset manually when booting. Good luck!&lt;/p&gt;&#xA;&lt;p&gt;(eOS is based on Ubuntu, so there will be no problems using that solution for eOS. Just make sure you follow correctly. And ignore it saying it's for Intel.)&lt;/p&gt;&#xA;" OwnerUserId="23868" LastEditorUserId="23868" LastEditDate="2020-09-06T04:27:53.040" LastActivityDate="2020-09-06T04:27:53.040" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25621" PostTypeId="2" ParentId="9251" CreationDate="2020-09-06T13:23:05.127" Score="0" Body="&lt;p&gt;I had the same issue - wingpanel suddenly disappeared.&lt;/p&gt;&#xA;&lt;p&gt;Did a &amp;quot;ps -ef | grep wingpanel&amp;quot; in terminal and realized wingpanel wasn't running.&lt;/p&gt;&#xA;&lt;p&gt;Restarted wingpanel process by typing &amp;quot;wingpanel&amp;quot; in terminal and wingpanel reappeared. That's it!&lt;/p&gt;&#xA;" OwnerUserId="23879" LastActivityDate="2020-09-06T13:23:05.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25622" PostTypeId="2" ParentId="10288" CreationDate="2020-09-06T13:32:21.190" Score="0" Body="&lt;p&gt;Had the same problem and nothing helped. Then stumbled on a very simple solution that works for me everytime - just suspend the system. Once suspended, simply log back in again. The wifi should now be enabled.&lt;/p&gt;&#xA;&lt;p&gt;Can't explain why this works - but it does.&lt;/p&gt;&#xA;" OwnerUserId="23880" LastActivityDate="2020-09-06T13:32:21.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25624" PostTypeId="2" ParentId="25489" CreationDate="2020-09-06T17:53:59.050" Score="0" Body="&lt;p&gt;It appears that this is an Ubuntu / kernel issue with some newer AMD CPUs/GPUs, see e.g. &lt;a href=&quot;https://blog.vx.sk/archives/287&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Users describe intermittent boot fails, also  behavior differing between running on battery vs plugged in .&lt;/p&gt;&#xA;&lt;p&gt;This was fixed for me and other users by &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2020/06/install-kernel-5-7-ubuntu-linux-mint/&quot; rel=&quot;nofollow noreferrer&quot;&gt;updating the kernel&lt;/a&gt; to 5.7.&lt;/p&gt;&#xA;&lt;p&gt;Thought I would post this here in case useful.&lt;/p&gt;&#xA;" OwnerUserId="10348" LastActivityDate="2020-09-06T17:53:59.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25627" PostTypeId="2" ParentId="22373" CreationDate="2020-09-07T18:06:02.603" Score="1" Body="&lt;p&gt;You need to create a .desktop file and put it inside &lt;code&gt;~/.local/share/applications&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To do that open any text editor and modify the following code to make it work with your app. Please modify the &lt;code&gt;Exec=&lt;/code&gt; line with the correct command to launch the app. You can add an icon as well, for that you need to save the file somewhere and add the full path.&lt;/p&gt;&#xA;&lt;p&gt;Save the following as caja.desktop&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name='Caja File Manager'&#xA;Comment='Open the file explorer'&#xA;Exec='caja'  &#xA;Icon=''&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastEditorUserId="8319" LastEditDate="2020-10-06T11:39:39.630" LastActivityDate="2020-10-06T11:39:39.630" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25630" PostTypeId="2" ParentId="25428" CreationDate="2020-09-07T21:57:36.957" Score="0" Body="&lt;p&gt;burn a dvd. After several weeks of trying to boot with a USB and installing, I gave up. Then I was given a bunch of blank dvd's. I burned elementary to a dvd and it installed with no problem. I erased the computer and tried several times and it worked every time!&lt;/p&gt;&#xA;" OwnerUserId="23893" LastActivityDate="2020-09-07T21:57:36.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25631" PostTypeId="1" CreationDate="2020-09-08T08:57:09.017" Score="1" ViewCount="1098" Body="&lt;p&gt;I am brand new to eOS. I downloaded and installed then updated eOS Hera 5.1.6. After my final update this morning I get this message:&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;Possible missing firmware /lib/firmware/rtl_nic/rtl8125a-3.fw for module r8169&#xA;W: Possible missing firmware /lib/firmware/rtl_nic/rtl8168fp-3.fw for module r8169&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_dmc_ver2_04.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/skl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/glk_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_33.0.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_guc_33.0.0.bin for module i915&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I ran sudo update-initramfs -u but the problem still exists - I get the same message. As a new user, is there anything else I can try?&lt;/p&gt;&#xA;&lt;p&gt;Is there a PPA I should add to resolve this? Is the solution on synaptic?&lt;/p&gt;&#xA;&lt;p&gt;Thank you in advance from a newb&lt;/p&gt;&#xA;" OwnerUserId="23896" LastActivityDate="2020-09-10T21:43:55.683" Title="Missing Firmware" Tags="|release-hera|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25632" PostTypeId="1" CreationDate="2020-09-08T09:45:15.103" Score="0" ViewCount="39" Body="&lt;p&gt;in the photo as you see &lt;strong&gt;ralink&lt;/strong&gt; (wifi dongle ) is disable and how I can enable.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WBe4U.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WBe4U.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;rfkill list all&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;0: phy0: Wireless LAN&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Soft blocked: no&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Hard blocked: yes&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;3: phy3: Wireless LAN&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Soft blocked: no&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Hard blocked: no&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23770" LastEditorUserId="23770" LastEditDate="2020-09-08T10:30:36.473" LastActivityDate="2020-09-08T10:30:36.473" Title="wifi dongle (ralink 802.11n) is disable" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25633" PostTypeId="1" CreationDate="2020-09-08T10:22:38.233" Score="0" ViewCount="32" Body="&lt;p&gt;I've been trying to switch to Ubuntu for a while now. I'm able to boot into an Ubuntu Live session with UNetBootin and everything detects my hard drive except for the installer. My hard drive has elementaryOS 5.0 Hera installed on it, and I don't know how to run it as superuser so I could delete the partition. Can anyone help? It'd be appreciated. Also my PC uses Legacy.&lt;/p&gt;&#xA;" OwnerUserId="20732" LastActivityDate="2020-09-08T10:22:38.233" Title="How do I fix the Ubuntu Installer not detecting my hard drive?" Tags="|ubuntu|" AnswerCount="0" CommentCount="4" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25638" PostTypeId="1" CreationDate="2020-09-09T17:02:05.683" Score="0" ViewCount="191" Body="&lt;p&gt;As you can see in the picture below, only the image shows up its thumbnail, not the video.&lt;/p&gt;&#xA;&lt;p&gt;How do I see their thumbnails?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/REmOG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/REmOG.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wkISU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wkISU.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23637" LastActivityDate="2020-09-09T17:02:05.683" Title="How can I see the thumbnails videos?" Tags="|pantheon-files|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25640" PostTypeId="1" CreationDate="2020-09-10T08:36:24.170" Score="0" ViewCount="38" Body="&lt;p&gt;May you please help me find out how I can &amp;quot;web search&amp;quot; or &amp;quot;search online&amp;quot; when I open the application menu?&lt;/p&gt;&#xA;&lt;p&gt;Perhaps this habit created from Windows I can bring over to Elementary OS?&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press &lt;code&gt;meta&lt;/code&gt; key&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;how fast is a turkey?&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Default browser is opened and search query is redirected to duckduckgo or google or w/e.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Right now, the only &amp;quot;Action&amp;quot; is to search AppCenter. How do I &amp;quot;search duckduckgo&amp;quot;?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/P793Q.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/P793Q.png&quot; alt=&quot;under action or above action web search??&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17987" LastActivityDate="2020-09-10T20:30:18.313" Title="web search (or search online) from application menu?" Tags="|menu|search|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25642" PostTypeId="2" ParentId="25573" CreationDate="2020-09-10T12:38:31.130" Score="1" Body="&lt;p&gt;If your installation is working, then there is probably little point in verification. The point of verifying the file is usually to check the iso file hasn't been corrupted during download. Corrupted downloads usually result in installation failures, so if you've managed to install elementary successfully, the iso file was probably valid.&lt;/p&gt;&#xA;&lt;p&gt;Realistically, you'll only be able to verify post-installation if you kept the original iso file you downloaded, and follow the steps as documented.&lt;/p&gt;&#xA;&lt;p&gt;If you didn't keep the iso file; in theory, depending on how you wrote the iso to your installation media, it &lt;em&gt;may&lt;/em&gt; be possible to turn that back into an iso and then verify it. But there are a lot of potential ways that could go wrong and give you a false negative result, so I won't document that here.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-09-10T12:38:31.130" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25644" PostTypeId="2" ParentId="25410" CreationDate="2020-09-10T20:05:55.617" Score="0" Body="&lt;h2&gt;Install Elementary OS tweak tools&lt;/h2&gt;&#xA;&lt;p&gt;This is similar to Gnome tweak tools, but for Elementary OS&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary-tweaks/elementary-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Open Tweaks and go to Miscellaneous, &lt;strong&gt;select Max volume over 100.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;h2&gt;&lt;/h2&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-10T20:05:55.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25645" PostTypeId="2" ParentId="25640" CreationDate="2020-09-10T20:30:18.313" Score="1" Body="&lt;p&gt;Elementary app launcher does not have such option.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-10T20:30:18.313" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25646" PostTypeId="2" ParentId="25631" CreationDate="2020-09-10T21:43:55.683" Score="3" Body="&lt;h2&gt;Resolve Missing Firmware Warnings&lt;/h2&gt;&#xA;&lt;p&gt;&lt;em&gt;If everything is working fine, then those warnings are of no importance so technically you can ignore them. Anyway, to have a peace of mind you can get rid of those by manually downloading and installing firmwares.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;First download all missing firmwares from Intel repository of firmware blobs:&lt;/p&gt;&#xA;&lt;p&gt;For &lt;strong&gt;i915&lt;/strong&gt;: &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;For &lt;strong&gt;rtl_nic&lt;/strong&gt;: &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtl_nic/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/rtl_nic/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then copy all to corresponding lib firmware folders&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp ~/Downloads/*.bin /lib/firmware/i915/&#xA;sudo cp ~/Downloads/*.fw /lib/firmware/rtl_nic/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Lastly update initramfs&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And now you can sleep well at night&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-10T21:43:55.683" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25648" PostTypeId="1" CreationDate="2020-09-11T08:22:47.110" Score="0" ViewCount="43" Body="&lt;p&gt;Presently, my fixed phone line is out of order, so I use my smartphone to keep accessing internet with my PC through a USB connection to the smartphone (my PC is fixed and has neither bluetooth nor wi-fi device).&lt;/p&gt;&#xA;&lt;p&gt;That fixed PC works under Windows 10 and has 2 LAN cards: one goes to the internet box, and the other one to an ethernet switch to integrate the local home network. When I connect my smartphone to the PC, I can see a 3rd LAN card in the list of LAN devices.&lt;/p&gt;&#xA;&lt;p&gt;But here is the problem: the Internet access doesn't work though the smartphone is shared, until I de-activate both my LAN cards (I'm in this case right now as I'm writing these lines).&lt;/p&gt;&#xA;&lt;p&gt;So here's my question: How can I keep access to Internet through my smartphone without having to de-activate my LAN cards?&lt;/p&gt;&#xA;&lt;p&gt;Thank you by advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="23916" LastEditorUserId="23916" LastEditDate="2020-09-11T08:29:22.123" LastActivityDate="2024-01-24T17:02:40.297" Title="Using a telephone for internet access on a local PC with other ethernet devices" Tags="|networking|internet|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25650" PostTypeId="2" ParentId="25648" CreationDate="2020-09-11T10:01:55.700" Score="0" Body="&lt;p&gt;The best way seems to be to edit your adapters' priority.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;code&gt;ifmetric&lt;/code&gt;:&lt;br /&gt;&#xA;&lt;code&gt;sudo apt-get install ifmetric&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Connect your USB adapter and run &lt;code&gt;route -n&lt;/code&gt; to see the current priority (in my case: wlp7s0 - wifi, enp0s20f0u3 - usb):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; Kernel IP routing table&#xA; Destination     Gateway         Genmask         Flags Metric Ref    Use Iface&#xA; 0.0.0.0         192.168.100.254 0.0.0.0         UG    100    0        0 wlp7s0&#xA; 0.0.0.0         192.168.42.129  0.0.0.0         UG    600    0        0 enp0s20f0u3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Looking at the Metric values, the highest priority is now set to &lt;code&gt;wlp7s0&lt;/code&gt; (the lowest number is the highest priority). So in order to set for example &lt;code&gt;enp0s20f0u3&lt;/code&gt; as prioritary, run something like&#xA;&lt;code&gt;sudo ifmetric wlp7s0 100000&lt;/code&gt;. Running &lt;code&gt;route -n&lt;/code&gt; again outputs:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  Kernel IP routing table&#xA;  Destination     Gateway         Genmask         Flags Metric   Ref    Use Iface&#xA;  0.0.0.0         192.168.42.129  0.0.0.0         UG    600       0        0 enp0s20f0u3&#xA;  0.0.0.0         192.168.100.254 0.0.0.0         UG    100000    0        0 wlp7s0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Now, the USB connection will be used, whenever it is available. The point is to set the permanent LAN connections to really big numbers, so that when you plug in the USB cable, the new adapter gets alocated a low metric. Since the USB's adapter metric is reset when you unplug it, it doesn't really make sense to set it to a low value. Succesive plugs and unplugs of the USB connection in my case resulted in its metric values shifting between 100 and 20100, but they always seem to be lower than 100000.&lt;/p&gt;&#xA;&lt;p&gt;No reboot needed to see the changes take effect.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-09-11T10:01:55.700" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25651" PostTypeId="2" ParentId="24058" CreationDate="2020-09-11T11:20:16.557" Score="0" Body="&lt;p&gt;I would say to increase RAM to 8GB - better performance with double of what you have now. Unless your&lt;/p&gt;&#xA;" OwnerUserId="23917" LastActivityDate="2020-09-11T11:20:16.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25652" PostTypeId="1" CreationDate="2020-09-11T15:04:37.147" Score="0" ViewCount="45" Body="&lt;p&gt;If I leave the computed idle for a long amount of time when I try to shutdown using the options from the top bar nothing happens. As a work-around, I can log out first and then use the shutdown in the greeter top right-hand corner. Otherwise, shutdown from the terminal also works.&lt;/p&gt;&#xA;&lt;p&gt;Grub options are as follows:&lt;/p&gt;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet acpi=force reboot=acpi&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;In /var/log/syslog I see this error:&lt;/p&gt;&#xA;&lt;p&gt;wingpanel[4143]: EndSessionDialog.vala:112: Unable to reboot: GDBus.Error:org.freedesktop.DBus.Error.InteractiveAuthorizationRequired: Interactive authentication required.&lt;/p&gt;&#xA;" OwnerUserId="23919" LastActivityDate="2024-03-13T03:09:06.097" Title="Shutdown from panel does not work" Tags="|release-hera|wingpanel|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25653" PostTypeId="2" ParentId="25564" CreationDate="2020-09-11T23:52:22.800" Score="0" Body="&lt;p&gt;Realtek 2.5GbE LAN chip. Turns out all that I needed to do was install the latest Elementry iso. Originally, I used an older iso that I had on a thumbdrive.&lt;/p&gt;&#xA;" OwnerUserId="23821" LastActivityDate="2020-09-11T23:52:22.800" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25655" PostTypeId="1" CreationDate="2020-09-12T20:37:02.267" Score="0" ViewCount="140" Body="&lt;p&gt;I installed Elementary OS alongside Windows 10 on MSI GF-63, had no difficulty getting things done but was stuck at the error screen shown below after I restarted the pc and I couldn't boot to elementary os. I went through all the forums related to this, none of them helped. I had ubuntu installed before and had the same issue but adding some parameters to the grub solved it, but didn't work now. I'd appreciate some help&#xA;&lt;img src=&quot;https://i.stack.imgur.com/PDWK7.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;[EDIT] I tried booting with pci=noaer, pci=nomsi, &amp;amp; pcie_aspm=off but they all got me stuck at a screen with no errors showing&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/1lFBX.jpg&quot; alt=&quot;Fails to boot after adding the parameters&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="23927" LastEditorUserId="23927" LastEditDate="2020-09-13T12:12:22.610" LastActivityDate="2020-09-13T12:12:22.610" Title="Stuck at this error after a fresh installation: PCIe bus error: severity=corrected, type=data link layer" Tags="|boot|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25661" PostTypeId="1" CreationDate="2020-09-14T01:30:13.767" Score="0" ViewCount="17" Body="&lt;p&gt;I sighed up to be a sponsor today.  10.00 tier.  I have been a user for sometime and finally bit the bullet and became a sponsor.  I did the 10.00 tier to get early access.  But it's been hours and I still get get access to the sponsor release.  Could not find an easy way to contact someone about it.  So, here I am.  Can someone please assist?&lt;/p&gt;&#xA;&lt;p&gt;Donald&lt;/p&gt;&#xA;" OwnerUserId="3632" LastActivityDate="2020-09-14T01:30:13.767" Title="Git Sponsor access" Tags="|github|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25662" PostTypeId="1" CreationDate="2020-09-14T11:25:25.640" Score="0" ViewCount="39" Body="&lt;p&gt;I have a printer Brother MFC-J5730 that has already worked on Elementary OS but suddenly it stops working, I can still control it via windows but not via OS.&#xA;In cups i have the mention (idle, accepting jobs, not shared, serverdefault) and it is indeed on-line (green indication), ip address is correct and I have already restarted the installation but without result.(The message is &amp;quot;the printer is unreachable at this time&amp;quot;)&#xA;When I send out a print, the box that is being printed appears but nothing happens&lt;/p&gt;&#xA;&lt;p&gt;Can somebody help me&lt;/p&gt;&#xA;&lt;p&gt;Bruno&lt;/p&gt;&#xA;" OwnerUserId="20660" LastActivityDate="2020-09-24T11:18:37.787" Title="Printer Brother MFC-J5730 no longer works" Tags="|settings|networking|printer|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25663" PostTypeId="2" ParentId="10684" CreationDate="2020-09-14T17:31:35.897" Score="2" Body="&lt;p&gt;There is now a list of Files shortcuts at &lt;a href=&quot;https://github.com/elementary/files/wiki/shortcuts&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/wiki/shortcuts&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-09-14T17:31:35.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25665" PostTypeId="1" CreationDate="2020-09-15T13:29:33.300" Score="0" ViewCount="29" Body="&lt;p&gt;Hello everyone Pls i request u guys to help me out eith this problem.&#xA;I am running a 2007 built desktop with the intel duo core processor @2ghz(64 bit cpu).&#xA;I recently made a live usb for elementary os.The ysb booted on my new laptop but it didnt boot on my desktop. I have installed ubuntu earlier on the same desktop and tge usb booted fine but in cade of elementary i am unable to boot from the usb even after using multiple tools and even after changing boot priority order but it always looks as if the computer didnt recognise the usb as bootable. Pls help me with this problem.&lt;/p&gt;&#xA;" OwnerUserId="23951" LastEditorUserId="23951" LastEditDate="2020-09-15T15:08:45.167" LastActivityDate="2020-09-15T15:08:45.167" Title="Live USB wont boot on BIOS system(PLS HELP!)" Tags="|release-hera|boot|usb|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25669" PostTypeId="1" CreationDate="2020-09-16T16:11:14.623" Score="0" ViewCount="243" Body="&lt;p&gt;I tried install Elementary Os 5.1.6 Hera but after enroll the mok key and reboot... The system says Verification Failure and only disabling secure boot i can boot... Is there any way to install it keeping secure boot working?&lt;/p&gt;&#xA;" OwnerUserId="23960" LastActivityDate="2020-09-16T16:11:14.623" Title="Elementary Os Secure Boot Failure after install" Tags="|system-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25671" PostTypeId="1" CreationDate="2020-09-16T21:23:44.373" Score="0" ViewCount="111" Body="&lt;p&gt;This is my first attempt to experiment with some form of Linux.&lt;/p&gt;&#xA;&lt;p&gt;I created a boot USB for Elementary OS 5.1.6 Hera using Rufus. The USB stick is a 256 gb Corsair Voyager. I booted from it, saw a bunch of errors related IRQ settings stream by, and then the screen went to black and stayed there.&lt;/p&gt;&#xA;&lt;p&gt;My PC is a recent build that functions fine with Windows 10. Ryzen 3700X, Gigabyte B550 Vision D, 64 gb RAM, older GTX 630 GPU (it was laying around), Corsair Force MP600 NVME 1 tb SSD.&lt;/p&gt;&#xA;&lt;p&gt;*****  09/18/2020&lt;/p&gt;&#xA;&lt;p&gt;So it seems the problem has &amp;quot;gone away&amp;quot;...&lt;/p&gt;&#xA;&lt;p&gt;@KGIII Have to admit that I don't know how/where to use &amp;quot;noacpi&amp;quot;... but maybe I don't need to.&lt;/p&gt;&#xA;&lt;p&gt;I decided to create another USB stick; used a different stick and used Etcher for Windows, but the same ISO file. Rebooted the PC, hit F12 to get the boot menu, and selected the USB stick. Still got the IRQ errors:&lt;/p&gt;&#xA;&lt;p&gt;0.320289] do_IRQ: 1.55 No irq for vector&lt;/p&gt;&#xA;&lt;p&gt;This repeats for 2.55, 3.55, 4.55, 5.55, 6.55, 7.55, 8.55, 9.55, and 10.55.&lt;/p&gt;&#xA;&lt;p&gt;Then the Elementary logo appeared, pulsed a few times, and then I got the try/install screen. I selected &amp;quot;try&amp;quot; and started checking things out.&lt;/p&gt;&#xA;&lt;p&gt;The new USB stick is a 32 gb USB 2 model. The first one was a 256 gb USB 3 model. Would that make a difference? I tried both in the same front-panel USB 3 port.&lt;/p&gt;&#xA;" OwnerUserId="23961" LastEditorUserId="23961" LastEditDate="2020-09-18T01:13:38.233" LastActivityDate="2024-01-31T21:06:15.693" Title="blank screen on boot" Tags="|release-hera|boot|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25672" PostTypeId="2" ParentId="2265" CreationDate="2020-09-16T23:36:27.707" Score="1" Body="&lt;p&gt;I can't leave a comment reply in the above thread but I was having the same issue.&lt;/p&gt;&#xA;&lt;p&gt;I am using 3 monitors with one rotated, some apps were opening off-screen, the comment by Rafael (using super + up) worked great for me.&lt;/p&gt;&#xA;" OwnerUserId="23963" LastActivityDate="2020-09-16T23:36:27.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25674" PostTypeId="2" ParentId="3073" CreationDate="2020-09-18T02:24:24.367" Score="0" Body="&lt;p&gt;I've created a bash alias to use the &lt;code&gt;xdg-open .&lt;/code&gt; command like the MacOs &lt;code&gt;open .&lt;/code&gt; ignoring the command output. You can place the alias at your &lt;code&gt;.bash_profile&lt;/code&gt; to make it persistent.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;alias open='xdg-open &amp;amp;&amp;gt; /dev/null'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23971" LastActivityDate="2020-09-18T02:24:24.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25677" PostTypeId="2" ParentId="25671" CreationDate="2020-09-18T14:43:04.363" Score="0" Body="&lt;p&gt;noacpi must be added in /etc/default/grub then grub must be rebuilt.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-09-18T14:43:04.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25679" PostTypeId="1" CreationDate="2020-09-19T04:40:24.103" Score="0" ViewCount="98" Body="&lt;p&gt;I have an iMac with an AFP and an SMB file share enabled and Elementary on a laptop. Elementary OS will connect using AFP but I receive a message saying “This Folder is Empty”. Trying to connect via SMB prompts me for a user name, domain, and password. I enter the user name and password correctly but I do not know what to use for the domain.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions on how to connect? I am able to connect to the iMac SMB shares from other devices.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="23979" LastActivityDate="2020-09-19T04:40:24.103" Title="Connecting to MacOS file share" Tags="|pantheon-files|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25680" PostTypeId="1" AcceptedAnswerId="25682" CreationDate="2020-09-19T09:30:48.860" Score="0" ViewCount="45" Body="&lt;p&gt;I would like to execute a command which requires sudo privileges. Specifically, I want to set my CPU frequency to a performance governor using the following script.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cpufreq-set -g performance&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;What I have done so far is I have added this custom command from &lt;code&gt;System Settings -&amp;gt; Applications -&amp;gt; Startup&lt;/code&gt;. I also changed the permission of the newly created file from &lt;code&gt;~/.config/autostart&lt;/code&gt;. However, the sudo command is still not executing. Are there any other ways to do this?&lt;/p&gt;&#xA;" OwnerUserId="23980" LastActivityDate="2020-09-19T10:02:59.410" Title="How to execute sudo commands after login?" Tags="|greeter|startup|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25682" PostTypeId="2" ParentId="25680" CreationDate="2020-09-19T10:02:59.410" Score="1" Body="&lt;p&gt;If you have a laptop, you can use TLP to automatically set it.&lt;/p&gt;&#xA;&lt;p&gt;If you prefer a more simple method, you can create a systemd service that will execute at startup.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo io.elementary.code /etc/systemd/system/cpuperformance.service&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Set CPU performance governor&#xA;&#xA;[Service]&#xA;Type=oneshot&#xA;ExecStart=/usr/bin/cpufreq-set -g performance&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Close that file and then execute &lt;code&gt;sudo systemctl daemon-reload &amp;amp;&amp;amp; sudo systemctl enable cpuperformance.service&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If you want to disable this in the future you can use &lt;code&gt;sudo systemctl disable cpuperformance.service&lt;/code&gt; and &lt;code&gt;sudo rm /etc/systemd/system/cpuperformance.service&lt;/code&gt; to remove the file.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-09-19T10:02:59.410" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25684" PostTypeId="1" CreationDate="2020-09-19T14:28:50.543" Score="0" ViewCount="85" Body="&lt;p&gt;I'm having some problems to control the music app (but also other, like spotify), from the dock bar. In fact, more than once I wasn't able to stop the music by closing the app, because it was simply not marked as &amp;quot;open&amp;quot; in the dockbar.&lt;/p&gt;&#xA;&lt;p&gt;Let me try to explain some situations linked to this problem:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;If I open an audio from &amp;quot;files&amp;quot;, then it's played into the music app, but I can access the instance that is playing, only by clicking in the top bar speaker (wingpanel), and finally clicking on the music app in the list.&lt;/li&gt;&#xA;&lt;li&gt;Opening an audio file when some music is playing, can start a new instance instead of adding the new file into the play que.&lt;/li&gt;&#xA;&lt;li&gt;If I'm listening some music, again opened from files, then if I try to open the music app from the dock bar, instead of the wingpanel instance, a new instance of the app is started, which is indipendent from the other one(accessible from wingpanel)..hence, I've got no control on what is playing.&lt;/li&gt;&#xA;&lt;li&gt;When I wasn't aware of this behavior, the only way to stop the music was to kill the app process.&lt;/li&gt;&#xA;&lt;li&gt;I've found a method to link the music app instance in the wingpanel to the music app dock icon.  Basically you must open the app from wingpanel, then reduce it from this icon  &lt;a href=&quot;https://i.stack.imgur.com/1V12L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1V12L.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;, and finally the app can be closed - as now is marked as running. It's the only way to close the app without killing the process.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I don't know if it's expressed very well, the major issue is about having no connection between the music apps in the wingpanel menu, and the icons in the dockbar.&lt;/p&gt;&#xA;&lt;p&gt;It's all this known by the creators of elementaryOS? There's any improvement planned to fix the detached instance issue?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16879/how-do-i-fully-close-apps&quot;&gt;another question&lt;/a&gt; about this from 2018!&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="20839" LastActivityDate="2024-02-02T16:08:46.053" Title="Cannot control music apps from dockbar" Tags="|wingpanel|plank|audio|music|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25687" PostTypeId="1" CreationDate="2020-09-20T04:59:05.343" Score="1" ViewCount="1005" Body="&lt;p&gt;Can anyone help me uninstalling the default apps in Hera?&lt;/p&gt;&#xA;&lt;p&gt;Music, Videos, Calculator, Mail... all simply have no use for me and I'd like to keep my os clean.&lt;/p&gt;&#xA;&lt;p&gt;However, I simply cannot find out what is the correct name of the default apps so I can remove them.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;edit&lt;/strong&gt;: correct name of the apps are:&lt;/p&gt;&#xA;&lt;p&gt;· Calculator: pantheon-calculator&lt;/p&gt;&#xA;&lt;p&gt;· Mail: pantheon-mail&lt;/p&gt;&#xA;&lt;p&gt;. Music: noise&lt;/p&gt;&#xA;&lt;p&gt;· Photos: pantheon-photos&lt;/p&gt;&#xA;&lt;p&gt;· Videos: audience&lt;/p&gt;&#xA;" OwnerUserId="23985" LastEditorUserId="-1" LastEditDate="2020-11-22T23:29:29.377" LastActivityDate="2021-02-01T22:18:20.447" Title="(Solved) How to uninstall default apps in Hera?" Tags="|applications|default|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25688" PostTypeId="2" ParentId="25684" CreationDate="2020-09-20T09:53:55.883" Score="0" Body="&lt;p&gt;Installing another version of plank (from the &amp;quot;unofficial&amp;quot; repo) seems to fix the problem.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:ricotz/docky&#xA;sudo apt update&#xA;sudo apt install --reinstall plank&#xA;killall plank&#xA;plank --preferences&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Original post here:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1933/plank-magnifying-effect/1934#1934&quot;&gt;Plank magnifying effect&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20839" LastActivityDate="2020-09-20T09:53:55.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25693" PostTypeId="2" ParentId="25687" CreationDate="2020-09-22T00:09:44.130" Score="3" Body="&lt;p&gt;Go to the Appcenter, open the Installed tab, and scroll down to the app you want to uninstall, click on it, then hit uninstall.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6anbg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6anbg.png&quot; alt=&quot;Install a default app&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23996" LastEditorUserId="3018" LastEditDate="2020-09-22T17:45:05.910" LastActivityDate="2020-09-22T17:45:05.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25694" PostTypeId="1" CreationDate="2020-09-22T06:10:19.313" Score="0" ViewCount="77" Body="&lt;p&gt;During installation of elementary os it worked perfectly.&#xA;On reboot it stopped working.&#xA;I tried to do all software updates but the wifi card still doesn't work!&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 5.1.7 Hera&#xA;linux 5.4.0-47-generic&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/avjeL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/avjeL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QIL1A.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QIL1A.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23998" LastActivityDate="2020-11-06T19:58:55.443" Title="Wifi doesn't work after installation" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25697" PostTypeId="1" CreationDate="2020-09-22T16:45:10.153" Score="0" ViewCount="67" Body="&lt;p&gt;after making all the updates after the first installation and restarting the system, I can no longer activate the wifi or rather I can activate / deactivate it but in the settings screen it always tells me that it is deactivated.&#xA;I have a Matebook d14 2020 with Ryzen 7, how can I fix?&#xA;I attach a image of the error/bug&lt;a href=&quot;https://i.stack.imgur.com/AXg4e.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AXg4e.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24004" LastActivityDate="2020-09-23T22:15:45.553" Title="WiFi problem after upgrade" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25701" PostTypeId="2" ParentId="25697" CreationDate="2020-09-23T22:15:45.553" Score="1" Body="&lt;p&gt;I have the same problem and I found the solution myself.&lt;/p&gt;&#xA;&lt;p&gt;Apparently the problem is due to the Realtek 8822c video card driver (which is missing the rtw8822c_wow_fw.bin file needed to correctly load the rtw8822c_wow_fw.bin driver)&lt;/p&gt;&#xA;&lt;p&gt;The solution is to download the latest version of linux-firmware from:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/snapshot/linux-firmware-20200918.tar.gz&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/snapshot/linux-firmware-20200918.tar.gz&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Extract and copy the contents of the rtw88 folder to /lib/firmware/rtw88&lt;/p&gt;&#xA;&lt;p&gt;Restart the operating system.&lt;/p&gt;&#xA;&lt;p&gt;When restarting the wifi card will be fully functional!&lt;/p&gt;&#xA;" OwnerUserId="23998" LastActivityDate="2020-09-23T22:15:45.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25702" PostTypeId="2" ParentId="25583" CreationDate="2020-09-23T22:18:09.237" Score="0" Body="&lt;p&gt;I have the same problem and I found the solution myself.&lt;/p&gt;&#xA;&lt;p&gt;Apparently the problem is due to the Realtek 8822c video card driver (which is missing the rtw8822c_wow_fw.bin file needed to correctly load the rtw8822c_wow_fw.bin driver)&lt;/p&gt;&#xA;&lt;p&gt;The solution is to download the latest version of linux-firmware from:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/snapshot/linux-firmware-20200918.tar.gz&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/snapshot/linux-firmware-20200918.tar.gz&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Extract and copy the contents of the rtw88 folder to /lib/firmware/rtw88&lt;/p&gt;&#xA;&lt;p&gt;Restart the operating system.&lt;/p&gt;&#xA;&lt;p&gt;When restarting the wifi card will be fully functional!&lt;/p&gt;&#xA;" OwnerUserId="23998" LastActivityDate="2020-09-23T22:18:09.237" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25703" PostTypeId="1" CreationDate="2020-09-24T03:21:05.217" Score="0" ViewCount="45" Body="&lt;p&gt;Trying to set up existing Gmail IMAP accounts (with 2 factor on) in Thunderbird version 68.10.0 (64-bit) running on Hera 5.1.. Inputting account name and password, then the numbers from the authenticator app. I have ten Gmail accounts. Each time, they all repeat, asking for user name, password and numbers, over and over. I tried turning off 2 factor and using the setting for &amp;quot;less secure apps&amp;quot; in one of my accounts, but the problem persisted. Then I changed OAUTH to plain password in Thunderbird, but it still asks for password each time I try to fetch email from that account. I've tried the recommended setting in about:config also with no success. It seems that Thunderbird, at least this version, cannot work with Gmail. I was hoping to import my Thunderbird profile from Windows, which has a lot of offline folders that I want to keep. Is there a solution for this? Or is there another email client of the capability level of Thunderbird (multiple accounts and a unified inbox at the least) that is Gmail friendly? I also liked the automatic backup addon that Thunderbird has. BTW I hate Google. Big time!&lt;/p&gt;&#xA;" OwnerUserId="24015" LastEditorUserId="24015" LastEditDate="2020-09-24T04:17:54.810" LastActivityDate="2020-11-17T11:37:10.473" Title="Thunderbird Mail continually repeats authentication with Gmail" Tags="|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25704" PostTypeId="2" ParentId="25662" CreationDate="2020-09-24T11:18:37.787" Score="1" Body="&lt;p&gt;I have noticed that the problem is due to the installation of the latest updates, if I boot with a previous version of elementary (second choice at startup) the printer works perfectly, with the latest version it stops working.&#xA;I just wanted to let you know, not that it will yield anything because when one sees the questions circulating and the solutions that were given it is a sad thing, 0,0 support, Elementary looks good but nothing is being done to to help people out of need.&lt;/p&gt;&#xA;" OwnerUserId="20660" LastActivityDate="2020-09-24T11:18:37.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25706" PostTypeId="1" CreationDate="2020-09-24T20:36:23.877" Score="0" ViewCount="69" Body="&lt;p&gt;I read the answers to questions about pantheon files and tags. However, there is not such a helpful solution as in macOS.&lt;/p&gt;&#xA;&lt;p&gt;My question: Is there a chance to give a monetarian contribution for development of such a solution?&lt;/p&gt;&#xA;&lt;p&gt;Defining tags which are displayed in tge file manager's sidebar, assign them to files or directories, and search by them just clicking on them.&lt;/p&gt;&#xA;&lt;p&gt;This would be an excellent function to pantheon.&lt;/p&gt;&#xA;" OwnerUserId="24024" LastActivityDate="2024-02-08T00:07:00.827" Title="file manager with tag function as in macOS" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25707" PostTypeId="1" CreationDate="2020-09-24T21:47:23.587" Score="0" ViewCount="120" Body="&lt;p&gt;I enjoy the minimalism of Epiphany, though, as a suggestion, it would be useful to allow some implementation/configuration of security features beyond reliance upon Certificates.&lt;/p&gt;&#xA;&lt;p&gt;My main issue is that I find it difficult to distinguish between the currently active tab and other tabs that are open; the box shadow is, in my opinion, not enough of a differentiator between the current active tab and inactive tabs. Owing to this small issue, I am constantly closing tabs unintentionally. Perhaps, to make another suggestion, a darker shade of Grey would help.&lt;/p&gt;&#xA;&lt;p&gt;I would post this to the dev. area, but I don't know where it is.&lt;/p&gt;&#xA;" OwnerUserId="23804" LastActivityDate="2020-09-27T16:19:22.300" Title="Can Epiphany browser tabs be made more conspicuous?" Tags="|epiphany|web-browser|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25710" PostTypeId="2" ParentId="25393" CreationDate="2020-09-25T06:23:10.293" Score="0" Body="&lt;p&gt;I'm not sure that setting Nautilus as the default file manager works correctly.&#xA;For example, I'm using chrome as a browser, and after choosing &lt;strong&gt;Downloads&lt;/strong&gt; from the menu, and open the folder for a particular downloaded file, ElementaryOS open &lt;strong&gt;Pantheon Files&lt;/strong&gt; instead of Nautilus&lt;/p&gt;&#xA;" OwnerUserId="7859" LastActivityDate="2020-09-25T06:23:10.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25711" PostTypeId="1" CreationDate="2020-09-25T07:53:54.050" Score="0" ViewCount="222" Body="&lt;p&gt;I disabled any kind of notifications for AppCenter and removed it from the dock, but nevertheless once there is software update available it appears again. Why? How can I disable that behavior?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Background&lt;/strong&gt;. I have set up &lt;a href=&quot;https://wiki.debian.org/UnattendedUpgrades&quot; rel=&quot;nofollow noreferrer&quot;&gt;automatic updates&lt;/a&gt; without my intervention, because I don't want to go through update process every time I start my PC. While I understand that security is in the first place and system has to be updated regularly I find that behavior very annoying and distracting.&lt;/p&gt;&#xA;&lt;p&gt;Maybe there is possibility to stop AppCenter background task?&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-25T07:53:54.050" Title="AppCenter keeps poping up in dock" Tags="|release-hera|updates|appcenter|plank|notifications|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25713" PostTypeId="2" ParentId="25706" CreationDate="2020-09-25T18:51:08.380" Score="0" Body="&lt;p&gt;You can post a bounty for a desired feature at &lt;a href=&quot;https://www.bountysource.com/teams/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bountysource.com/teams/elementary&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;First raise a feature request at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; (after first checking there is not already a similar one). The report should give clear design goals for which the bounty would be awarded.&lt;/p&gt;&#xA;&lt;p&gt;Probably worth checking that the feature is desired and acceptable to the elementary design team as placing a bounty does not guarantee it will be developed or, if developed, will be accepted, and I am not sure a bounty can be withdrawn once placed.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2020-09-25T18:51:08.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25717" PostTypeId="1" CreationDate="2020-09-26T13:47:31.853" Score="0" ViewCount="955" Body="&lt;p&gt;I've a single OS pc, with latest version of elementary installed on. Everytime I start up the system, Grub asks me to select what to boot or it will select automatically in 30 second the first row (and that's the right one btw)... is there a way to remove this step?&#xA;thank you so much&lt;/p&gt;&#xA;&lt;p&gt;btw this is my grub file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLE=hidden&#xA;GRUB_TIMEOUT=0&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24037" LastEditorUserId="3018" LastEditDate="2020-09-26T17:31:48.023" LastActivityDate="2024-02-20T19:02:40.300" Title="How to remove grub on startup" Tags="|boot|grub|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25719" PostTypeId="2" ParentId="25717" CreationDate="2020-09-26T17:36:17.450" Score="0" Body="&lt;p&gt;Keep &lt;code&gt;GRUB_TIMEOUT_STYLE=hidden&lt;/code&gt; and set the line &lt;code&gt;GRUB_TIMEOUT=0.0&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;You need to set 0.0 instead of 0 because the grub developers wanted to avoid any problem caused by people disabling grub that way.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2020-09-26T17:36:17.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25720" PostTypeId="1" AcceptedAnswerId="25721" CreationDate="2020-09-26T20:10:55.707" Score="0" ViewCount="80" Body="&lt;p&gt;I have stereo speakers and am looking for a way to swap audio output of the left and right speakers. Is there any programmatic way of it?&lt;/p&gt;&#xA;" OwnerUserId="16746" LastActivityDate="2020-10-26T21:01:20.143" Title="How to switch left and right audio devices on elementary OS 5.1.7 Hera" Tags="|settings|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25721" PostTypeId="2" ParentId="25720" CreationDate="2020-09-26T20:10:55.707" Score="1" Body="&lt;p&gt;I have found the solution on &lt;a href=&quot;https://www.reddit.com/r/Ubuntu/comments/uzzjd/how_to_swap_audio_channels_in_pulseaudio/c502cyr?utm_source=share&amp;amp;utm_medium=web2x&amp;amp;context=3&quot; rel=&quot;nofollow noreferrer&quot;&gt;reddit&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aLeb4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aLeb4.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16746" LastActivityDate="2020-09-26T20:10:55.707" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25722" PostTypeId="2" ParentId="25707" CreationDate="2020-09-26T21:40:08.883" Score="1" Body="&lt;p&gt;elementary OS themes Epiphany to match elementary's theme, so there's nothing the Epiphany developers can do about this. Upstream Epiphany looks different and there is more contrast.&lt;/p&gt;&#xA;&lt;p&gt;You could ask the elementary developers to make theme changes to their GtkNotebook widget.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2020-09-26T21:40:08.883" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25726" PostTypeId="1" CreationDate="2020-09-27T18:55:05.237" Score="0" ViewCount="89" Body="&lt;p&gt;I need urgent help.&lt;/p&gt;&#xA;&lt;p&gt;There was a bug (I think) on my elementary os. When i tried to restar it didn't recognize any operating system. I tried to reinstall elementary from my flash drive (as i did before) and it opens on the “try” mode but cannot install it. The message is: “No root file system is defined. Please correct this from the partition menu”. I added a new partition table, but the message was the same.&lt;/p&gt;&#xA;&lt;p&gt;Background story: I installed elementary os on my notebook about 6 months ago. I save all my documents and works in an external drive. This past week I used my external drive on my friend’s computer (windows). When I came back home and tried to use my notebook (I use linux only) this happened (i don't know if it is related).&lt;/p&gt;&#xA;&lt;p&gt;I only know the basics of linux. I need help “for dummies”.&#xA;And im fucked because i have to finish an article for tomorrow!&#xA;So please!!! Does anybody can help me?&lt;/p&gt;&#xA;&lt;p&gt;The error was something like: [5828.052079] EXT4-fs error (device sda2) ext4-find:entry....&lt;/p&gt;&#xA;&lt;p&gt;And some other things I could not capture&lt;/p&gt;&#xA;" OwnerUserId="24044" LastActivityDate="2024-02-12T03:03:40.387" Title="Bug - can’t reinstall elemetary" Tags="|system-installation|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25728" PostTypeId="2" ParentId="8807" CreationDate="2020-09-28T00:43:14.033" Score="0" Body="&lt;p&gt;I remove modded source.list and use backup.source.list (source.list.save).&#xA;Then i do&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update &#xA;sudo apt-get upgrade &#xA;steam&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and all problem was be fix, maybe its help you.&lt;/p&gt;&#xA;&lt;p&gt;my source.list&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#deb cdrom:[elementary OS 5.1 _hera_ - stable amd64 (20200706)]/ bionic contrib main non-free&#xA;&#xA;# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to&#xA;# newer versions of the distribution.&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic main restricted&#xA;&#xA;## Major bug fix updates produced after the final release of the&#xA;## distribution.&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic-updates main restricted&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu&#xA;## team. Also, please note that software in universe WILL NOT receive any&#xA;## review or updates from the Ubuntu security team.&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic universe&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic universe&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic-updates universe&#xA;&#xA;## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu &#xA;## team, and may not be under a free licence. Please satisfy yourself as to &#xA;## your rights to use the software. Also, please note that software in &#xA;## multiverse WILL NOT receive any review or updates from the Ubuntu&#xA;## security team.&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic multiverse&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic-updates multiverse&#xA;&#xA;## N.B. software from this repository may not have been tested as&#xA;## extensively as that contained in the main release, although it includes&#xA;## newer versions of some applications which may provide useful features.&#xA;## Also, please note that software in backports WILL NOT receive any review&#xA;## or updates from the Ubuntu security team.&#xA;deb http://ua.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;# deb-src http://ua.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse&#xA;&#xA;## Uncomment the following two lines to add software from Canonical's&#xA;## 'partner' repository.&#xA;## This software is not part of Ubuntu, but is offered by Canonical and the&#xA;## respective vendors as a service to Ubuntu users.&#xA;# deb http://archive.canonical.com/ubuntu bionic partner&#xA;# deb-src http://archive.canonical.com/ubuntu bionic partner&#xA;&#xA;deb http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted&#xA;deb http://security.ubuntu.com/ubuntu bionic-security universe&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security universe&#xA;deb http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24047" LastActivityDate="2020-09-28T00:43:14.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25730" PostTypeId="1" AcceptedAnswerId="25750" CreationDate="2020-09-28T03:12:40.727" Score="0" ViewCount="69" Body="&lt;p&gt;I accidentally set my screen resolution to 800x600 in a 720p laptop screen, and when I tried to revert it, I can't reach the buttons because my laptop screen was too small. The answers that I tried were for Loki. Is there a version of this for Hera?&lt;/p&gt;&#xA;" OwnerUserId="24049" LastActivityDate="2020-10-01T10:30:07.443" Title="How do I set my screen resolution back to 1366x768?" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25731" PostTypeId="1" AcceptedAnswerId="25736" CreationDate="2020-09-28T06:47:41.033" Score="0" ViewCount="820" Body="&lt;p&gt;I'm having trouble with elementary OS' default email client where I can't even log in even after I carefully typed my email and password there. Am I missing something here? I already tried adding my email through the Online Accounts section in settings, which it did but still didn't even log me in the default email client. Maybe I need to change some settings? If that's the case then, you guys know what to do.&lt;/p&gt;&#xA;&lt;p&gt;Another weird problem is that I can't remove my account in the Online Accounts section. Even if I click that little minus sign below and exit settings, when I go back it's still there.&lt;/p&gt;&#xA;" OwnerUserId="23868" LastEditorUserId="3018" LastEditDate="2020-09-30T16:49:51.477" LastActivityDate="2020-09-30T16:49:51.477" Title="Can't Use Default Mail Client. Am I Missing Something?" Tags="|settings|pantheon-mail|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25732" PostTypeId="1" CreationDate="2020-09-28T11:53:17.230" Score="0" ViewCount="61" Body="&lt;p&gt;Whenever I submit the correct password, my PC does a strange mini-boot (it shows the Dell logo) and then I get straight back to the same login screen, I cannot progress further.&#xA;I have never had this issue before and have been using EOS daily for months.&lt;/p&gt;&#xA;&lt;p&gt;I was using it normally before, but noticed my hard drive was full, so I began deleting some files from my downloads and from the cache for apps I'm no longer using. I'm fairly sure I didn't delete anything vital. I then cleared the recycling bin.&#xA;After this it still said there were 0 bytes free, so I restarted my PC where I then encountered this issue.&lt;/p&gt;&#xA;" OwnerUserId="24050" LastActivityDate="2024-02-11T01:07:01.107" Title="Can't get past login screen" Tags="|release-juno|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25733" PostTypeId="2" ParentId="25732" CreationDate="2020-09-28T13:40:01.753" Score="0" Body="&lt;p&gt;I fixed the issue by removing old files and folders. After that I was able to login normally.&lt;/p&gt;&#xA;" OwnerUserId="24050" LastActivityDate="2020-09-28T13:40:01.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25734" PostTypeId="1" CreationDate="2020-09-28T15:48:40.533" Score="0" ViewCount="31" Body="&lt;p&gt;i have installed Elementary on my NUC-8-i7 about 6 months ago. Everything was working perfectly for me and i had no issues. Recently I upgraded my monitor to a QHD monitor and suddenly it won't boot... Seems that this is something to do with the monitor as if i bring back my old monitor, it boots.&#xA;I also tried a fresh install on a different HD, but event the installer won't boot.&lt;/p&gt;&#xA;" OwnerUserId="24054" LastActivityDate="2020-09-28T15:48:40.533" Title="Elementary won't boot with a QHD monitor" Tags="|boot|system|graphic-drivers|grub|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25736" PostTypeId="2" ParentId="25731" CreationDate="2020-09-28T20:01:35.210" Score="0" Body="&lt;p&gt;Does your gmail account have &lt;em&gt;2 step verification&lt;/em&gt; enabled?&lt;/p&gt;&#xA;&lt;p&gt;Have you enabled &lt;em&gt;Less secure app access&lt;/em&gt;?&lt;/p&gt;&#xA;&lt;p&gt;Have you checked that you are using correct keyboard and not using CAPS?&lt;/p&gt;&#xA;&lt;p&gt;Alternatively you can try gnome online accounts with gnome settings:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&#xA;# Install Gnome Control Center by typing the following command:&#xA;&#xA;sudo apt-get install gnome-control-center&#xA;&#xA;# Install Gnome Online Account by typing the following command (optional):&#xA;&#xA;sudo apt-get install gnome-online-accounts&#xA;&#xA;# Open Gnome Control Center by typing the following command:&#xA;&#xA;Exec=env XDG_CURRENT_DESKTOP=GNOME gnome-control-center –overview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;em&gt;accept as answer if it worked for you&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2020-09-28T20:01:35.210" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25737" PostTypeId="1" CreationDate="2020-09-28T20:29:36.403" Score="1" ViewCount="192" Body="&lt;p&gt;Hello i made a usb stick for install elementary os but i got an error in installation.&#xA;Error is :&lt;/p&gt;&#xA;&lt;p&gt;mount: mounting dev/loop0 on //filesystem.squashfs failed such as no file or directory&lt;/p&gt;&#xA;" OwnerUserId="24058" LastActivityDate="2020-10-14T11:04:53.167" Title="Cannot install Elementary OS" Tags="|system-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25738" PostTypeId="1" CreationDate="2020-09-29T09:14:13.677" Score="0" ViewCount="142" Body="&lt;p&gt;For some reason the Files app started failing (does not start as non root user)&lt;/p&gt;&#xA;&lt;p&gt;It returns &amp;quot;Failed to register: Timeout was reached&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I am not exactly sure what triggered this. The only thing I can think of is that I have been trying to setup a vpn connection using f5fpc and openconnect-vpn.openconnect but I don't know whether it is related.&lt;/p&gt;&#xA;&lt;p&gt;Any tips how to fix or debug this?&lt;/p&gt;&#xA;&lt;p&gt;Many thanks!&lt;/p&gt;&#xA;&lt;p&gt;Peter&lt;/p&gt;&#xA;" OwnerUserId="24062" LastActivityDate="2024-02-12T00:03:45.447" Title="io.elementary.files fails to start and returns &quot;Failed to register: Timeout was reached&quot;" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25740" PostTypeId="2" ParentId="25738" CreationDate="2020-09-29T13:18:12.583" Score="0" Body="&lt;p&gt;Never mind. It's ok again. My guess is because of a very slow usb drive.&lt;/p&gt;&#xA;&lt;p&gt;Peter&lt;/p&gt;&#xA;" OwnerUserId="24066" LastActivityDate="2020-09-29T13:18:12.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25741" PostTypeId="2" ParentId="25726" CreationDate="2020-09-29T21:46:27.950" Score="0" Body="&lt;p&gt;I fixed it!&lt;/p&gt;&#xA;&lt;p&gt;First, I tried to reinstall elementary os from my USB stick - didn't work. The USB stick stopped working too.&lt;/p&gt;&#xA;&lt;p&gt;Then I download OpenSuse in another USB stick. It worked on trial mode but it didn't find any directory on my computer. Therefore, it did not install anything on my computer.&lt;/p&gt;&#xA;&lt;p&gt;Then I tried to install Manjaro. It didn't work, but a new message started to show on my screen about a bug in BIOS and initramfs. (before there was a message about no directory found). &lt;strong&gt;This was the turning point for me to fix it.&lt;/strong&gt; Unfortunately, I don't know how it happened.&lt;/p&gt;&#xA;&lt;p&gt;After, I followed this: &lt;a href=&quot;https://www.youtube.com/watch?v=xf&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=xf&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Basically, you need to type: fsck /dev/sda1&lt;/p&gt;&#xA;&lt;p&gt;It didn't work with sda1, so it tried with sda2. It worked!!&lt;/p&gt;&#xA;&lt;p&gt;I followed the rest of the video (just type yes for everything). Then, type reboot. Then select the option *elementary, and that was it. My Notebook started to work again as it was before. Elementary was working as if anything has happened. I did not lose any of my packages.&lt;/p&gt;&#xA;&lt;p&gt;I don't know what or how it happened but it worked. Above is exactly what I did. Probably most of it has nothing to do with the solution.&lt;/p&gt;&#xA;&lt;p&gt;One more thing. The problem started after I tried to updated my elementary os. I did not try to update again.&lt;/p&gt;&#xA;" OwnerUserId="24070" LastEditorUserId="24070" LastEditDate="2020-09-29T21:59:52.573" LastActivityDate="2020-09-29T21:59:52.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25745" PostTypeId="1" AcceptedAnswerId="26162" CreationDate="2020-09-30T06:16:20.030" Score="0" ViewCount="109" Body="&lt;p&gt;The latest Firefox update gives a really weird double window.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oe101.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oe101.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Anyone else facing this? Can somebody please clarify?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&lt;p&gt;Oy! it's gone when title-bar was hid.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/K8FzT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/K8FzT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18392" LastEditorUserId="18392" LastEditDate="2020-09-30T07:41:32.517" LastActivityDate="2020-12-16T19:22:01.033" Title="Firefox or pantheon window render bug?" Tags="|pantheon|firefox|xorg|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25747" PostTypeId="1" CreationDate="2020-09-30T19:07:14.387" Score="0" ViewCount="2878" Body="&lt;p&gt;I really want to try out elementary os. I made a bootable USB on both Rufus and etcher. Both give me the same results. I get a blue screen saying Verification failed: (0x1A) Security Violation. I have turned off secure boot. If I press ok I see on the lower left side flash quickly:&lt;/p&gt;&#xA;&lt;p&gt;Failed to load image: Security Policy Violation&#xA;Failed to open \EFI\BOOT\mmx64.efi - Not Found&#xA;Failed to load image \EFI\BOOT\mmx64.efi: Not Found&#xA;start_image() returned Not Found&lt;/p&gt;&#xA;&lt;p&gt;Anyone know how I can get around this?&lt;/p&gt;&#xA;" OwnerUserId="24075" LastActivityDate="2020-11-01T11:04:20.363" Title="Cant install elementary, Security Violation" Tags="|install|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25750" PostTypeId="2" ParentId="25730" CreationDate="2020-10-01T10:30:07.443" Score="0" Body="&lt;p&gt;You can use xrandr cli-tool for that.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal by &lt;code&gt;⌘ + T&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;xrandr&lt;/code&gt; to see available screen modes&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary@elementary:~$ xrandr&#xA;Screen 0: minimum 320 x 200, current 800 x 600, maximum 16384 x 16384&#xA;VGA-1 connected primary 800x600+0+0 (normal left inverted right x axis y axis) 0mm x 0mm&#xA;   1920x962      60.00 +&#xA;   2560x1600     59.99    59.97  &#xA;   1920x1440     60.00  &#xA;   1856x1392     60.00  &#xA;   1792x1344     60.00  &#xA;   2048x1152     60.00  &#xA;   1920x1200     59.88    59.95  &#xA;   1920x1080     60.00  &#xA;   1600x1200     60.00  &#xA;   1680x1050     59.95    59.88  &#xA;   1400x1050     59.98    59.95  &#xA;   1600x900      60.00  &#xA;   1280x1024     60.02  &#xA;   1440x900      59.89    59.90  &#xA;   1280x960      60.00  &#xA;   1366x768      59.79    60.00  &#xA;   1360x768      60.02  &#xA;   1280x800      59.81    59.91  &#xA;   1280x768      59.87    59.99  &#xA;   1280x720      60.00  &#xA;   1024x768      60.00  &#xA;   800x600       60.32*   56.25  &#xA;   848x480       60.00  &#xA;   640x480       59.94  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Apply mode you want&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary@elementary:~$ xrandr --output VGA-1 --mode 1280x800&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Done&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;p.s.&#xA;it should work for most of the Linux distribution&lt;/p&gt;&#xA;" OwnerUserId="24081" LastActivityDate="2020-10-01T10:30:07.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25752" PostTypeId="1" CreationDate="2020-10-01T16:28:44.920" Score="0" ViewCount="45" Body="&lt;p&gt;I can surf the web just fine, but as soon as there are videos on a site, the mouse freezes and I have to shut down to move forward.  Do I need to install nvidia 340, 390, and/or nvidia Driver 418-server?  Could it be a weak wireless connection?  I am new here and just learning my way around.  I am also very reluctant to put codes in in the terminal because I see other options for downloading. I'm not understanding the terms such as: Executable file for Linux, Flatpack Package Format, and Personal Package Archive for Unbuntu in relation to downloading software like Inkscape, for example. I'm using elementary os on 27 inch iMac late 2012.  Thank you for helping me get over a couple of these basic but necessary, hurdles to better understanding.&lt;/p&gt;&#xA;" OwnerUserId="24084" LastActivityDate="2020-10-01T16:28:44.920" Title="Internet freezes" Tags="|wifi|software-installation|drivers|nvidia|gnome-terminal|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25755" PostTypeId="1" CreationDate="2020-10-01T23:49:42.210" Score="1" ViewCount="139" Body="&lt;p&gt;I installed elementary OS couple of days ago and am really liking it. Thanks to the developer team for the great work.&lt;/p&gt;&#xA;&lt;p&gt;I want to listen online radio. I have downloaded .pls and .asx files from the website of the raido station. But i am not able to open both of these files using Music app. I have also tried Video app, same thing.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way that Music app could play these files? Or should I look for another application on AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;Here is the files;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://listen.trancebase.fm/dsl.pls&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://listen.trancebase.fm/dsl.pls&lt;/a&gt;&#xA;&lt;a href=&quot;http://listen.trancebase.fm/dsl.asx&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://listen.trancebase.fm/dsl.asx&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="24090" LastActivityDate="2024-03-16T10:07:45.870" Title="Music - PLaying online radios" Tags="|music|multimedia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25756" PostTypeId="2" ParentId="25755" CreationDate="2020-10-02T00:28:40.427" Score="0" Body="&lt;p&gt;You absolutely can. If your existent media player isn't up to the task, one fairly universal application (&lt;a href=&quot;https://www.videolan.org/vlc/&quot; rel=&quot;nofollow noreferrer&quot;&gt;VLC&lt;/a&gt;) almost certainly is.&lt;/p&gt;&#xA;&lt;p&gt;You can install it from the AppCenter or from the terminal. To install it via the AppCenter, just search for it and click install. To do so via the terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install vlc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, just copy the URL to the stream you want to play and open it as a 'network stream' in VLC. I just tested it  with the exact URL you posted and it plays just fine.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-10-02T00:28:40.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25757" PostTypeId="1" CreationDate="2020-10-02T03:11:50.460" Score="0" ViewCount="42" Body="&lt;p&gt;I get this error when trying to run Eclipse. This is after installing Eclipse from the App Center on a fresh install of Elementary 5.1:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;!SESSION Thu Oct 01 22:09:06 CDT 2020 ------------------------------------------&#xA;!ENTRY org.eclipse.equinox.launcher 4 0 2020-10-01 22:09:06.608&#xA;!MESSAGE Exception launching the Eclipse Platform:&#xA;!STACK&#xA;java.lang.ClassNotFoundException: org.eclipse.core.runtime.adaptor.EclipseStarter&#xA;    at java.base/java.net.URLClassLoader.findClass(URLClassLoader.java:471)&#xA;    at java.base/java.lang.ClassLoader.loadClass(ClassLoader.java:589)&#xA;    at java.base/java.lang.ClassLoader.loadClass(ClassLoader.java:522)&#xA;    at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:626)&#xA;    at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584)&#xA;    at org.eclipse.equinox.launcher.Main.run(Main.java:1438)&#xA;    at org.eclipse.equinox.launcher.Main.main(Main.java:1414)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24091" LastEditorUserId="24091" LastEditDate="2020-10-15T00:06:27.187" LastActivityDate="2020-10-15T00:06:27.187" Title="Eclipse won't start" Tags="|release-juno|release-hera|applications|eclipse|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25758" PostTypeId="2" ParentId="25747" CreationDate="2020-10-02T10:46:43.637" Score="2" Body="&lt;p&gt;You will need to disable 'Secure Boot' in your machine's BIOS settings.&lt;/p&gt;&#xA;" OwnerUserId="24093" LastActivityDate="2020-10-02T10:46:43.637" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25759" PostTypeId="1" CreationDate="2020-10-02T13:40:08.313" Score="0" ViewCount="70" Body="&lt;p&gt;I have been using elementary OS for a while and it's working really well until this started. While it was working the Bluetooth dialog would show 2 devices which were both named LE_WF1000XM3 and connecting to both of them would connect the earbuds. However for some reason this recently stopped working. When I attempt to do the same thing it rapidly connects and disconnects 2 times before finally stays disconnected.I have tried restarting the computer, restarting the Bluetooth service with systemctl, and connecting through the bluetoothctl command. I also tried connecting with the device in pairing mode. None of these steps change the behavior of the device. I can provide additional information on request.&lt;/p&gt;&#xA;" OwnerUserId="24095" LastActivityDate="2024-02-16T04:08:41.197" Title="WF-1000XM3 refusing connection (Hera 5.1)" Tags="|bluetooth|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25762" PostTypeId="1" CreationDate="2020-10-03T11:35:19.133" Score="0" ViewCount="26" Body="&lt;p&gt;The installer does not honor disk install target ... it sort of installed where I asked but then during Grub creation decided to muck around the primary disk boot sector.&lt;/p&gt;&#xA;&lt;p&gt;really not sure why that would even need to be touched?&lt;/p&gt;&#xA;&lt;p&gt;Can I get someone to verify if this&#xA;is the case and fix that?  LinuxMint installs and runs fine on my iMac ... I am just glad the main disk was encryted.&lt;/p&gt;&#xA;&lt;p&gt;Thx/Sx&lt;/p&gt;&#xA;" OwnerUserId="24101" LastActivityDate="2024-02-22T21:02:20.287" Title="Touched Boot Sector 0" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25763" PostTypeId="2" ParentId="25759" CreationDate="2020-10-03T21:11:55.663" Score="0" Body="&lt;p&gt;Fixed this by removing the headset from bluetoothctl and re pairing it&lt;/p&gt;&#xA;" OwnerUserId="24095" LastActivityDate="2020-10-03T21:11:55.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25764" PostTypeId="1" CreationDate="2020-10-04T10:28:41.377" Score="0" ViewCount="14" Body="&lt;p&gt;I run a Schenker VIA 14 laptop with eOS 517 Hera (recent fresh install) and for several apps (Clementine, qps, my-weather-indicator and others) which I usually have on the built-in (primary) laptop screen (FullHD) rather than on my 4k secondary screen I do not see any pull-downs. Once I move them to the large secondary screen, I first have a vertically maximized pull-down and if I active the pull-down a second time it reacts normal. Once I move the app back to the smaller primary screen the pull-downs are gone again (modal locking in effect). Other apps like Firefox and Thunderbird behave as expected on both screen.&lt;/p&gt;&#xA;" OwnerUserId="18096" LastEditorUserId="18096" LastEditDate="2021-04-08T07:39:34.530" LastActivityDate="2021-04-08T07:39:34.530" Title="No more pulldown menus and popup windows in many apps on (smaller) primary screen" Tags="|display|applications|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25765" PostTypeId="1" CreationDate="2020-10-04T14:26:57.063" Score="1" ViewCount="193" Body="&lt;p&gt;i have Dell G7 with geforce 2060 and latest drivers with latest Elementary&#xA;i have black shadow on letf and top when web aplication opens new firefox window.&#xA;on java mouse is not sinhronized with java-fx window&#xA;cursor marks clickable top left edge of window.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9hIpH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9hIpH.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hpgzh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hpgzh.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24106" LastEditorUserId="24106" LastEditDate="2020-10-06T06:16:07.387" LastActivityDate="2020-12-31T09:12:37.067" Title="window shadow on firefox" Tags="|firefox|java|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25767" PostTypeId="2" ParentId="2443" CreationDate="2020-10-05T08:08:06.200" Score="0" Body="&lt;p&gt;Hello I'm a new user for Elementary OS. About the error that make you can't login into it. I had some advice maybe can be useful. The first I Installed this,&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I activate automatically login when I'm installing the Elementary OS.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The second thing that I did,I had removed the apps that I didn't need,Idk it has a relationship with the data login that can cause and error or not. The only app that I removed is calculator and I don't anything expect that. Well beacuse I was too afraid about the error that hard to find out about it&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I test with sudo apt-get update,even I try sudo apt-get upgrade,I do it twice&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Even I install wifi driver that do update and upgrade&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I have seen the error like firmware ,but now i didn't see it anymore,idk why&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Oh right,don't remove the feedback&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;And now even after I suspend or in lock mode,I can unlock it. I felt depressed aboout this,I hope my advice can help you. I curious about why the developer doesn't tell us how to fix it. Or why he didn't have an old version before 5.1.&lt;/p&gt;&#xA;&lt;p&gt;Github : Nura21&lt;/p&gt;&#xA;" OwnerUserId="24109" LastActivityDate="2020-10-05T08:08:06.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25772" PostTypeId="2" ParentId="21547" CreationDate="2020-10-06T04:35:34.507" Score="2" Body="&lt;p&gt;It's actually quite simple. Run the following commands.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/autostart/nm-applet.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Find the following line.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;NotShowIn=KDE;GNOME;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change it to the following instead.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;NotShowIn=KDE;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then save, and restart. That's it!&lt;/p&gt;&#xA;" OwnerUserId="24116" LastActivityDate="2020-10-06T04:35:34.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25773" PostTypeId="1" AcceptedAnswerId="28466" CreationDate="2020-10-06T12:24:19.390" Score="1" ViewCount="329" Body="&lt;p&gt;This is merely a question, and I'm not really sure where to place it. If there is a more appropriate place, please let me know.&lt;/p&gt;&#xA;&lt;p&gt;Elementary has been slowly moving to integrate Flatpak. I personally do not agree with sandboxing solutions and make my best efforts to avoid them.&lt;/p&gt;&#xA;&lt;p&gt;Elementary moving to distribute os basic apps such as terminal, files, settings, and the likes via Flatpak (or similar solutions for that matter) will mean I will leave Elementary os.&lt;/p&gt;&#xA;&lt;p&gt;Does a timeline of this move exists? Or what apps exactly will end up in Flatpak?&lt;/p&gt;&#xA;&lt;p&gt;Does this move mean they will not be available via apt? Can one possibly replace the Flatpak ones in the future?&lt;/p&gt;&#xA;&lt;p&gt;I understand there are benefits to Flatpak. But there are also drawbacks. None of the benefits are problems to me today, and the drawbacks will definitely be.&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="19334" LastActivityDate="2021-08-15T15:20:39.647" Title="Flatpak vs apt plans" Tags="|flatpak|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25774" PostTypeId="1" CreationDate="2020-10-06T16:18:03.387" Score="1" ViewCount="252" Body="&lt;p&gt;Audio quality is suddenly absolutely terrible when I use my bluetooth headphones, and I absolutely have no idea why it happened.&lt;/p&gt;&#xA;&lt;p&gt;I read in some forums that I (might) just have to make the hardware use High Fidelity Playback (A2DP), but the new Sound Settings for Hera doesn't let me change that anymore. What do I do?&lt;/p&gt;&#xA;" OwnerUserId="24117" LastActivityDate="2022-01-21T15:05:05.530" Title="How can I set my bluetooth headphones to use A2DP?" Tags="|bluetooth|audio|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25777" PostTypeId="1" CreationDate="2020-10-07T17:42:12.880" Score="0" ViewCount="751" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9E2Pe.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9E2Pe.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How do I remove that manuelscheider repository??&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-11-07T08:03:20.420" Title="Remove corrupted repository" Tags="|updates|software-installation|system|ppa|thirdpartyapps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25778" PostTypeId="1" CreationDate="2020-10-07T21:11:09.433" Score="0" ViewCount="97" Body="&lt;p&gt;Everything is fine except the desktop!&#xA;no shortcuts, no folders. Why is it needed at all? make it normal and functional!&#xA;only takes up space on the screen.&lt;/p&gt;&#xA;" OwnerUserId="24126" LastActivityDate="2024-02-26T06:06:25.853" Title="Functionaly DESKTOP!" Tags="|desktop|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25780" PostTypeId="1" CreationDate="2020-10-08T04:28:02.157" Score="0" ViewCount="71" Body="&lt;p&gt;I want to install mint service desk on my elementary os and for that I have to install a docker first, not happening. Can anyone please tell be which linux version package will support elementary os [ubuntu/centOS/debian etc}&lt;/p&gt;&#xA;" OwnerUserId="24127" LastEditorUserId="9445" LastEditDate="2020-10-08T10:52:31.660" LastActivityDate="2020-10-13T19:03:01.927" Title="How can i mannualy install packages in elementary os?" Tags="|release-hera|software-installation|applications|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25781" PostTypeId="2" ParentId="25778" CreationDate="2020-10-08T07:43:52.990" Score="0" Body="&lt;p&gt;Hi Polikarp you can set the desktop icon envioriment with this app&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cmgWV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cmgWV.png&quot; alt=&quot;Download Desktop Folder by DesktopFolder Developers in Accesories ~ Elementary OS Store&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24130" LastActivityDate="2020-10-08T07:43:52.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25782" PostTypeId="2" ParentId="25777" CreationDate="2020-10-08T08:00:48.117" Score="1" Body="&lt;p&gt;to delete a uncompatile or bad repository try this command in the termnial&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;when nano is openned, remove that bad repository (manuelscheider) and press&lt;/p&gt;&#xA;&lt;p&gt;Ctrl + O to save and Ctrl + X to exit.&lt;/p&gt;&#xA;&lt;p&gt;After this operation run this command in the terminal&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get update &amp;amp;&amp;amp; sudo apt-get upgrade -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And that is all. I hope help you&lt;/p&gt;&#xA;" OwnerUserId="24130" LastActivityDate="2020-10-08T08:00:48.117" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25784" PostTypeId="1" AcceptedAnswerId="25796" CreationDate="2020-10-09T09:57:25.443" Score="0" ViewCount="351" Body="&lt;p&gt;Could I install the Deepin Desktop Environment on Elementary OS?I was caught away by it's beauty.I've already seen how to install it on Ubuntu,Debian,etc., wondering if I will have a non-usable OS after installing the DE.I would also like to switch between DDE and Pantheon.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastActivityDate="2020-10-11T03:12:11.333" Title="Install Deepin DE" Tags="|release-hera|desktop|desktop-environment|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25791" PostTypeId="2" ParentId="25762" CreationDate="2020-10-10T13:36:21.470" Score="0" Body="&lt;p&gt;been 7 days ... must not be an important question.&lt;/p&gt;&#xA;&lt;p&gt;therefore I have decided not to utilize elementary os -- going forward I evaluate other candidates for use on live MacOS targets.&lt;/p&gt;&#xA;&lt;p&gt;bye&lt;/p&gt;&#xA;" OwnerUserId="24101" LastActivityDate="2020-10-10T13:36:21.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25793" PostTypeId="1" CreationDate="2020-10-10T16:33:37.570" Score="0" ViewCount="115" Body="&lt;p&gt;How do you get libreoffice writer to look good, I got the elementary OS style sheet and icons but it looks pretty ordinary, the galaxy icon set is an improvement but still looks ugly.&lt;/p&gt;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;&lt;p&gt;Thx&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FJNie.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FJNie.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24141" LastActivityDate="2024-02-26T12:02:40.413" Title="libreoffice themes in elementary os problem?" Tags="|release-hera|settings|themes|icons|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25796" PostTypeId="2" ParentId="25784" CreationDate="2020-10-11T03:12:11.333" Score="0" Body="&lt;p&gt;Theoretically yes you could, but doing so would completely defeat the point of elementary OS, and it could potentially break things.&#xA;If you want the Deepin DE you're better off just using the &lt;a href=&quot;https://www.deepin.org/en/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Deepin OS&lt;/a&gt; or something like &lt;a href=&quot;https://ubuntudde.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu DDE Remix&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user24150" LastActivityDate="2020-10-11T03:12:11.333" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25797" PostTypeId="1" CreationDate="2020-10-11T03:19:07.377" Score="0" ViewCount="2857" Body="&lt;p&gt;Does the most recent version of Elementary OS support Wayland?&#xA;If so, does the most recent version of Elementary OS support 125% fractional scaling for a fully high-definition monitor?&lt;/p&gt;&#xA;" OwnerUserId="24151" LastEditorUserId="129" LastEditDate="2022-08-06T07:51:32.990" LastActivityDate="2022-08-06T07:51:32.990" Title="Does the most recent version of Elementary OS support Wayland?" Tags="|desktop|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25798" PostTypeId="2" ParentId="25797" CreationDate="2020-10-11T03:24:37.457" Score="3" Body="&lt;p&gt;Currently elementary OS does not support Wayland, and neither will the next release.&#xA;However, the developers are making efforts to prepare elementary OS for a transition to Wayland in the future. They talk about this some in the recent &lt;a href=&quot;https://blog.elementary.io/platform-changes-in-elementary-os-6/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Platform Changes in elementary OS 6&lt;/a&gt; blog post.&lt;/p&gt;&#xA;&lt;p&gt;I don't have a source for this, but I remember reading about how they don't plan on adding support for fractional scaling for various reasons.&lt;/p&gt;&#xA;" OwnerDisplayName="user24150" LastActivityDate="2020-10-11T03:24:37.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25800" PostTypeId="2" ParentId="25780" CreationDate="2020-10-11T14:40:43.430" Score="1" Body="&lt;p&gt;Currently elementary OS is based on Ubuntu 18.04, so Ubuntu packages should work.&lt;/p&gt;&#xA;" OwnerDisplayName="user24150" LastActivityDate="2020-10-11T14:40:43.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25801" PostTypeId="1" CreationDate="2020-10-11T19:39:10.180" Score="1" ViewCount="31" Body="&lt;p&gt;I recently stuck a second hard drive with Windows 10 installed in my system. Ever since, suspend is not working correctly in Elementary OS. The computer appears to suspend normally, but when I wake it up (for example by hitting any key on the keyboard) it just reboots - I get the BIOS splash screen, GRUB menu, disk encryption prompt (seems slower than usually at this step) etc up to login.&lt;/p&gt;&#xA;&lt;p&gt;Very annoying and I don't really know where to start, seems like there are lots of Linux suspend issues out there including on 18.04, possible Kernel bugs, etc. but all the troubleshooting ideas I see involve laptops and power management issues. I had no problems until I installed another drive (with Windows 10 preinstalled) and ran update-grub in Elementary. Dual booting seems to work as expected and suspend works fine in Windows. But ever since I've had this rather inconvenient issue.&lt;/p&gt;&#xA;&lt;p&gt;Obviously this may not be an Elementary problem per se but I figured I'd start here. Not even sure where I'd find the relevant logs. The only thing that shows up in /var/log/syslog after suspend and right before it starts rebooting is &lt;code&gt;systemd-modules-load[552]: Inserted module 'lp'&lt;/code&gt; Apparently this is something to do with parallel ports...doesn't really give me any clues, I'm too young to really know what a parallel port is and I'm not all that young. If this is causing the crash, that really would be too funny. (The lp module seems to load fine on reboot after the crash.)&lt;/p&gt;&#xA;&lt;p&gt;I'm on 5.1.7 Hera, kernel 5.4.0, NVIDIA GPU with proprietary drivers.&lt;/p&gt;&#xA;" OwnerUserId="24157" LastActivityDate="2020-10-11T19:39:10.180" Title="Resume from suspend causes reboot" Tags="|release-hera|suspend|grub|microsoft-windows|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25802" PostTypeId="1" CreationDate="2020-10-11T21:56:03.380" Score="0" ViewCount="40" Body="&lt;p&gt;I was installing &lt;code&gt;wine&lt;/code&gt; (hardest install of my life) and I didn't read the packages that would be deleted/installed/uninstalled thoroughly enough (I was stuck in dependency hell). It destroyed my elementary install. I had to reinstall most of my programs (though configuration still seemed to be there); including &lt;code&gt;elementary-desktop&lt;/code&gt; and the login client.&lt;/p&gt;&#xA;&lt;p&gt;There remain many changes to fix (but hey, at least I have wine not working very well now?). One of these is that when I used to plug my Android in it would show up on the Files browser. Now I cannot see it, even though I can see it when I &lt;code&gt;lsusb&lt;/code&gt;. Does anyone know which file I've broken here?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="24158" LastActivityDate="2020-10-11T21:56:03.380" Title="Android device no longer shows in FIles browser" Tags="|pantheon-files|files|wine|android|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25804" PostTypeId="1" CreationDate="2020-10-12T20:26:27.247" Score="1" ViewCount="38" Body="&lt;p&gt;I installed Elementary OS on an old PC for a disabled adult. First I really love the ability to disable all the apps except the one you need. This person will push every button and try every feature. They also love to print pictures with no regard to ink usage. If left unchecked they would print through an entire ream of paper in no time. I went in to the terminal and disabled CUPS completely. The print button is ghosted out. But if you double click on the printer it will print the job. Is there a way to completely disable all print services?&lt;/p&gt;&#xA;" OwnerUserId="24164" LastActivityDate="2020-10-12T20:26:27.247" Title="Disable printing" Tags="|printer|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25805" PostTypeId="1" CreationDate="2020-10-13T04:54:40.563" Score="0" ViewCount="37" Body="&lt;p&gt;I have created an additional user via the GUI and subsequently changed their GUI and UID so they match other servers I have on the network (and I can use shared filesystems properly). Once I do that the user is not available on the login window, user admin window, or as an available user in the Power menu on the GUI top right.&lt;/p&gt;&#xA;&lt;p&gt;Question: Can anyone suggest how to change GUI and UID for users in Elementary after they are created?&lt;/p&gt;&#xA;&lt;p&gt;Note: I did find a workaround - and that is to create the user via the command line from an admin account using useradd below. But if you change it after creating via the GUI then it breaks things.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo useradd -u 502 -g 20 &lt;em&gt;username&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Ubuntu and Fedora let you specify the UID/GID in the GUI when creating the user - so that could be a nice feature request for ElementaryOS&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="24167" LastEditorUserId="24167" LastEditDate="2020-10-13T05:18:36.227" LastActivityDate="2024-02-25T14:06:00.773" Title="Unable to log in via GUI if you change GID and UID" Tags="|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25807" PostTypeId="2" ParentId="25805" CreationDate="2020-10-13T06:38:33.747" Score="0" Body="&lt;p&gt;My workaround above stopped working after a reboot. I think I found the issue...&lt;/p&gt;&#xA;&lt;p&gt;/etc/adduser.conf defines the ranges:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;FIRST_SYSTEM_UID=100&#xA;LAST_SYSTEM_UID=999&#xA;&#xA;FIRST_SYSTEM_GID=100&#xA;LAST_SYSTEM_GID=999&#xA;&#xA;# FIRST_[GU]ID to LAST_[GU]ID inclusive is the range of UIDs of dynamically&#xA;# allocated user accounts/groups.&#xA;FIRST_UID=1000&#xA;LAST_UID=59999&#xA;&#xA;FIRST_GID=1000&#xA;LAST_GID=59999&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It looks like the UI ignores UIDs/GUIs that are outside the non-system range.&lt;/p&gt;&#xA;&lt;p&gt;It is only a problem for me because I am trying to match UID and GID with macOS (which uses the 500 range for users and 20 for &amp;quot;staff&amp;quot; group.&lt;/p&gt;&#xA;" OwnerUserId="24167" LastActivityDate="2020-10-13T06:38:33.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25809" PostTypeId="1" CreationDate="2020-10-13T07:20:55.383" Score="0" ViewCount="36" Body="&lt;p&gt;Cant update core and apps. Please help.&#xA;More information in attach&lt;/p&gt;&#xA;&lt;p&gt;This could be caused by external (manually added) repositories or a corrupted source file.&#xA;E: Repository &amp;quot;http://packages.elementary.io/appcenter bionic InRelease&amp;quot; changed the value of the &amp;quot;Origin&amp;quot; field from &amp;quot;&amp;quot; to &amp;quot;appcenter bionic&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rSpwd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rSpwd.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24170" LastActivityDate="2020-11-13T11:03:25.350" Title="Failed to get updates" Tags="|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25810" PostTypeId="1" CreationDate="2020-10-13T07:21:49.587" Score="0" ViewCount="126" Body="&lt;p&gt;anand@anand2:/lib/modules/5.4.0-48-generic/kernel/sound/drivers$ ls&#xA;pcsp&lt;/p&gt;&#xA;&lt;p&gt;-&amp;gt; I can't find any package for snd.aloop inside this directory,&lt;/p&gt;&#xA;&lt;p&gt;anand@anand2:~$ uname -r&#xA;5.4.0-48-generic&lt;/p&gt;&#xA;&lt;p&gt;-&amp;gt; Please Anyone Help me to solve this ?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in Advance!&lt;/p&gt;&#xA;" OwnerUserId="24169" LastActivityDate="2023-03-03T15:01:20.163" Title="Can't find snd.aloop" Tags="|updates|sound|drivers|package|alsa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25811" PostTypeId="1" CreationDate="2020-10-13T08:23:24.690" Score="0" ViewCount="63" Body="&lt;p&gt;If i want to export vpn connection from networkmanager (ubuntu) what should i do?&#xA;I already copied /etc/NetworkManager/system-connections/.nmconnection file into my new elementary installation. But i cant find this connection in settings. What i'm doing/thinking wrong?&lt;/p&gt;&#xA;" OwnerUserId="24171" LastActivityDate="2024-02-25T21:03:50.467" Title="How to move vpn connection from ubuntu to elementary os" Tags="|settings|networking|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25812" PostTypeId="2" ParentId="25811" CreationDate="2020-10-13T08:31:42.383" Score="0" Body="&lt;p&gt;What i did is moved all my settings by hand. If you moving openvpn connection, dont forget to also check &amp;quot;advanced settings&amp;quot; and check all tabs there.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3TmzU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3TmzU.png&quot; alt=&quot;Network openvpn advanced settings tls auth tab&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24171" LastEditorUserId="24171" LastEditDate="2020-10-13T09:15:24.720" LastActivityDate="2020-10-13T09:15:24.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25813" PostTypeId="2" ParentId="25780" CreationDate="2020-10-13T19:03:01.927" Score="0" Body="&lt;p&gt;I just found this with a little google search it explains:&lt;/p&gt;&#xA;&lt;p&gt;How to install docker adding a repositiory.&lt;/p&gt;&#xA;&lt;p&gt;How to install the verion that ubuntu/elementary has&lt;/p&gt;&#xA;&lt;p&gt;How to run docker.&lt;/p&gt;&#xA;&lt;p&gt;Hope it helps:&#xA;&lt;a href=&quot;https://phoenixnap.com/kb/install-docker-on-ubuntu-20-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://phoenixnap.com/kb/install-docker-on-ubuntu-20-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19608" LastActivityDate="2020-10-13T19:03:01.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25814" PostTypeId="2" ParentId="25793" CreationDate="2020-10-13T19:10:34.957" Score="0" Body="&lt;p&gt;You can select any other UI from the menus:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;view -&amp;gt; user interface&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;If you're more of a ribborn UI style, the select the tabbed UI, on the other hand I just selected the white background under tools -&amp;gt; options -&amp;gt; customization to have a more &amp;quot;cleaner&amp;quot; buttons layout.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jlwYF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jlwYF.png&quot; alt=&quot;My libreoffice&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19608" LastActivityDate="2020-10-13T19:10:34.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25815" PostTypeId="2" ParentId="25778" CreationDate="2020-10-13T19:13:51.767" Score="0" Body="&lt;p&gt;This has been explained many times before, this is a design choice, to keep the desktop uncluttered and to make users to really use the different folders that exist on your home folder.&lt;/p&gt;&#xA;&lt;p&gt;If you desire to use it to put files you can use the &amp;quot;Desktop folder&amp;quot; app on the app center.&lt;/p&gt;&#xA;" OwnerUserId="19608" LastActivityDate="2020-10-13T19:13:51.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25819" PostTypeId="2" ParentId="25810" CreationDate="2020-10-14T07:32:04.850" Score="1" Body="&lt;p&gt;Type in the terminal&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install linux-modules-extra-$(uname -r)&#xA;$ sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After the restart check does it work with this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;modprobe snd-aloop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-10-14T07:32:04.850" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25820" PostTypeId="2" ParentId="25809" CreationDate="2020-10-14T10:08:50.003" Score="1" Body="&lt;p&gt;Uninstall a corrupt repository by hand and it works fine. Download and update.&lt;/p&gt;&#xA;" OwnerUserId="24085" LastActivityDate="2020-10-14T10:08:50.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25823" PostTypeId="1" CreationDate="2020-10-14T18:57:45.863" Score="0" ViewCount="187" Body="&lt;p&gt;I'm new to Linux, and I just installed elementaryOS. The first thing I do is change the resolution to 1680 x 1050 so that I can see things properly, but when I reboot, the resolution is set back to 2256 x 1338. How can I change it permanently so that it doesn't change? I've heard of using a tool called &lt;code&gt;xrandr&lt;/code&gt; but I'm still new to Linux and can't figure out how to use it. Please help!&lt;/p&gt;&#xA;" OwnerUserId="24186" LastEditorUserId="24186" LastEditDate="2020-10-14T20:36:43.023" LastActivityDate="2024-02-27T13:05:55.707" Title="Resolution settings not saved" Tags="|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25824" PostTypeId="1" CreationDate="2020-10-14T19:48:15.267" Score="0" ViewCount="63" Body="&lt;p&gt;I have a problem with booting from pendrive for installation. Photo screens attached&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8SM5E.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8SM5E.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24125" LastActivityDate="2024-03-26T20:01:15.187" Title="Problem with installation from usb" Tags="|usb-drive|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25825" PostTypeId="1" CreationDate="2020-10-14T22:21:11.783" Score="0" ViewCount="26" Body="&lt;p&gt;I've downloaded elementary OS ISO file some time ago and created a bootable USB drive.&#xA;Now I cannot longer locate the original ISO file but would like to install elementary OS on a VM on a windows host. all the docs I found show the step by step using the iso file (which I no longer have)&lt;/p&gt;&#xA;&lt;p&gt;can I use the bootable USB drive instead of the ISO file to install elementary OS on a VM ?&#xA;how?&lt;/p&gt;&#xA;" OwnerUserId="20840" LastActivityDate="2020-10-14T22:21:11.783" Title="installing elementary os on VM (windows host) with a bootable USB drive" Tags="|microsoft-windows|install|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25826" PostTypeId="1" CreationDate="2020-10-15T05:53:49.387" Score="0" ViewCount="84" Body="&lt;p&gt;After restoring a snapshot from TimeShift my laptop reboots and boots onto a blue screen that reads &amp;quot;ERROR: Verification failed:(0x1A)Security Violation&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;I have to go into my BIOS setup and disable secure boot for eOS to run. How can I restore snapshots from timeshift without having to disable secure boot?&lt;/p&gt;&#xA;" OwnerUserId="24187" LastActivityDate="2024-03-16T07:01:40.257" Title="Unable to enter eOS after restoring snapshot in TimeShift" Tags="|boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25829" PostTypeId="2" ParentId="25823" CreationDate="2020-10-15T07:19:43.377" Score="0" Body="&lt;p&gt;Open the terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /usr/sbin/lightdm-session&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Here is how the first part of that file looks now:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;#&#xA;# LightDM wrapper to run around X sessions.&#xA;&#xA;echo &amp;quot;Running X session wrapper&amp;quot;&#xA;&#xA;# Load profile&#xA;for file in &amp;quot;/etc/profile&amp;quot; &amp;quot;$HOME/.profile&amp;quot; &amp;quot;/etc/xprofile&amp;quot; &amp;quot;$HOME/.xprofile&amp;quot;; do&#xA;  if [ -f  &amp;quot;$file&amp;quot; ]; then&#xA;     echo &amp;quot;Loading profile from $file&amp;quot;;&#xA;     . &amp;quot;$file&amp;quot;&#xA;  fi&#xA;done&#xA;&#xA;-- Here add the xrandr settings&#xA;&#xA;# Load resources&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press INS (insert) button or i on your keyboard. This will go into the insert mode and you can use go to the end of the line , press enter and put the content I described below.&lt;/p&gt;&#xA;&lt;p&gt;Copy below:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --newmode &amp;quot;1680x1050_60.00&amp;quot; 85.25 1680 1368 1440 1576 1784 1050 768 771 781 798 -hsync +vsync&#xA;xrandr --addmode CRT1 1680x1050_60.00&#xA;xrandr --output CRT1 --mode 1680x1050_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Paste into the file with the right button of the mouse, where I marked it with this section:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;-- Here add the xrandr settings &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Press Esc button on your keyboard. Then type :x to save and exit. Restart the Elementary OS. Check does it work.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-10-15T07:19:43.377" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25831" PostTypeId="1" CreationDate="2020-10-16T13:20:34.437" Score="0" ViewCount="353" Body="&lt;p&gt;I tried installing Zorin OS 15 on a 2009 MacMini running El Capitan so that it would dual boot. It crashed out at the last moment :(&#xA;The good news was that it didn't brick my MacMini&#xA;So does anyone have any experience of installing Elementary OS on this vintage of Macs?&lt;/p&gt;&#xA;" OwnerUserId="24195" LastActivityDate="2024-03-06T01:04:20.593" Title="Installing Elementary OS on an 2009 MacMini running El Capitan" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25832" PostTypeId="1" AcceptedAnswerId="25835" CreationDate="2020-10-17T03:07:50.600" Score="0" ViewCount="220" Body="&lt;p&gt;I'm using elementary OS 5.1.7 Hera. I checked on Network Settings &amp;gt; Devices &amp;gt; Wireless. The triple vertical dots and Settings button didn't have the feature to forget these networks. I have like 50 public networks saved and would like to remove them using the GUI. Maybe I'm missing something because I can do this easily on Ubuntu?&lt;/p&gt;&#xA;" OwnerUserId="24198" LastEditorUserId="15904" LastEditDate="2020-11-19T08:37:28.323" LastActivityDate="2020-11-19T08:37:28.323" Title="How to forget Wi-Fi network that has already been saved previously?" Tags="|release-hera|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25833" PostTypeId="1" AcceptedAnswerId="25834" CreationDate="2020-10-17T04:01:51.393" Score="0" ViewCount="1776" Body="&lt;p&gt;I'm running elementary os 5.1.7 Hera.I would like to install a tiling window manager,because I would be needing it frequently.I just want to know if the installation of a window manager would cause my os to break and whether i could switch between the window manager and Pantheon.Thanks in advance :-)&lt;/p&gt;&#xA;" OwnerUserId="23394" LastEditorUserId="23394" LastEditDate="2020-10-17T10:25:32.497" LastActivityDate="2020-10-17T13:11:43.153" Title="Installing a tiling window manager" Tags="|release-hera|desktop|window-manager|desktop-environment|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25834" PostTypeId="2" ParentId="25833" CreationDate="2020-10-17T09:41:16.913" Score="0" Body="&lt;p&gt;Simple as that. Switch to terminal and learn how to use it. It is a must have in Linux.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nameofthewm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change name of the app to the name of the Windows Manager you want to install.&lt;/p&gt;&#xA;&lt;p&gt;If you want to remove WM. Switch to Pantheon and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge nameofthewm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19988" LastEditorUserId="19988" LastEditDate="2020-10-17T13:11:43.153" LastActivityDate="2020-10-17T13:11:43.153" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25835" PostTypeId="2" ParentId="25832" CreationDate="2020-10-17T09:42:38.713" Score="1" Body="&lt;p&gt;Open terminal and type:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nmtui&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Use arrows to delete unwanted network. Be careful and do it slowly to remove only unwanted network.&lt;/p&gt;&#xA;" OwnerUserId="19988" LastActivityDate="2020-10-17T09:42:38.713" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25837" PostTypeId="2" ParentId="21123" CreationDate="2020-10-17T19:57:07.470" Score="0" Body="&lt;p&gt;You can't take away the black screen entirely, but increasing the graphics memory will reduce the time the black screen stays on your monitor.&lt;/p&gt;&#xA;" OwnerUserId="24186" LastActivityDate="2020-10-17T19:57:07.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25838" PostTypeId="1" CreationDate="2020-10-18T03:59:45.473" Score="0" ViewCount="107" Body="&lt;p&gt;I installed google chrome a week ago and while using it when I go for a search it redirects me to Yahoo search or the app closes when search icon or enter button is pressed so I uninstalled Google chrome stable and also used autoremove to remove all file but in my ssd I still see old Google Chrome files and I reinstalled Google Chrome I see all errors are still there in the fresh install too, I think sudo apt-get autoremove is not working or there is some error I cant understand&lt;/p&gt;&#xA;" OwnerUserId="24205" LastActivityDate="2020-10-18T03:59:45.473" Title="Unable to remove to Google chrome files" Tags="|ubuntu|google-chrome|sudo|" AnswerCount="0" CommentCount="23" ContentLicense="CC BY-SA 4.0" />
  <row Id="25840" PostTypeId="1" CreationDate="2020-10-18T12:14:47.753" Score="0" ViewCount="122" Body="&lt;p&gt;in Files, I am unable to install .deb apps with gdebi, i just quits after it loads all the file and the install button is clicked.&#xA;But it fully works when opened the .deb file from Files with root privileges.&#xA;How can I make I make it also work in the user Files.&#xA;thnks!&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2020-10-18T12:14:47.753" Title="unable to install .deb apps with gdebi" Tags="|applications|apps|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25841" PostTypeId="1" CreationDate="2020-10-18T13:21:06.273" Score="1" ViewCount="31" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SzIqS.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SzIqS.jpg&quot; alt=&quot;Black Borders&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Someone please help me with this problem.Faast.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastActivityDate="2020-10-18T13:21:06.273" Title="Black Borders On Some Windows" Tags="|release-hera|window-management|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25842" PostTypeId="1" CreationDate="2020-10-18T15:52:36.703" Score="0" ViewCount="20" Body="&lt;p&gt;Recently I was playing with some CRTs hooked up to my computer via a simple VGA-to-DVI-D adapter. Some monitors worked, but there were a few with weird refresh issues that would cause slowdown on eOS as the CRT kept restarting, attempting to correct itself.&lt;/p&gt;&#xA;&lt;p&gt;On Windows, there was no slowdown persisting after I plugged my computer back into my normal ViewSonic 60hz LCD monitor via DisplayPort. eOS is having a bad time, however.&lt;/p&gt;&#xA;&lt;p&gt;Pantheon is scaling correctly, but only seems to be refreshing about once every three seconds. I tried restarting the x-server and disconnecting and reconnecting my monitor but the issue is still persisting.&lt;/p&gt;&#xA;&lt;p&gt;My specs are&#xA;i7-6700K&#xA;RX 580&#xA;16GB RAM&lt;/p&gt;&#xA;&lt;p&gt;Any help troubleshooting would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="15297" LastActivityDate="2024-03-02T00:09:06.003" Title="Hera 5.1.7 - Display Slowdown After Connecting CRT via Adapter. (Persisting After CRT Disconnect and Restart)" Tags="|display|pantheon|xorg|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25843" PostTypeId="2" ParentId="25842" CreationDate="2020-10-18T16:05:09.757" Score="0" Body="&lt;p&gt;While I was playing with the CRTs I enabled the iGPU on my CPU to see if the display would work that way.&lt;/p&gt;&#xA;&lt;p&gt;I plugged an HDMI cable into the Motherboard's port and my main monitor started working immediately.&lt;/p&gt;&#xA;&lt;p&gt;I rebooted into the bios and disabled the iGPU and now everything is running correctly.&lt;/p&gt;&#xA;" OwnerUserId="15297" LastActivityDate="2020-10-18T16:05:09.757" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25844" PostTypeId="2" ParentId="3695" CreationDate="2020-10-18T20:03:31.140" Score="-1" Body="&lt;p&gt;Commenting on Ravans post from 2015, that worked perfectly. i noticed on the login screen before installing mesa-utils that the login screen was 1080p.&lt;/p&gt;&#xA;&lt;p&gt;(im adding this because i just signed up)&lt;/p&gt;&#xA;" OwnerUserId="24208" LastActivityDate="2020-10-18T20:03:31.140" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25848" PostTypeId="1" CreationDate="2020-10-20T05:12:26.433" Score="0" ViewCount="366" Body="&lt;p&gt;&lt;strong&gt;realtek 8822CE&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Hi everyone. I want to install elementary OS to my laptop. After installation, I do not have a network, I can get it only by connecting a USB modem.&#xA;And so, I tried to install drivers from &lt;a href=&quot;https://github.com/bserem/Realtek-RTL8822x-Linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bserem/Realtek-RTL8822x-Linux&lt;/a&gt;, but with no success.&#xA;Previously, I saw the inscription &amp;quot;no cable inserted&amp;quot;, but now I just see &amp;quot;no network&amp;quot;. I searched for the driver via additional drivers, but it didn't find anything. Help me please! I really want to work on elementary OS in my laptop!&lt;/p&gt;&#xA;" OwnerUserId="24218" LastActivityDate="2024-02-09T14:07:41.037" Title="How to install Realtek 8822CE WiFi driver?" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25849" PostTypeId="1" CreationDate="2020-10-20T07:58:41.550" Score="0" ViewCount="89" Body="&lt;p&gt;I recently switched to elementary OS 5.1, in some applications like spotify and VS Code i am experiencing flickering of screen. Is there anybody who has experienced the same problems and how to solve this.&#xA;System setup: Dual boot along with windows 10&#xA;Graphic Card: Nvidia 1050 Ti&lt;/p&gt;&#xA;" OwnerUserId="24219" LastEditorUserId="15904" LastEditDate="2020-11-19T08:37:16.097" LastActivityDate="2020-11-19T08:37:16.097" Title="Elementary OS 5.1 flickering" Tags="|release-hera|nvidia|spotify|vscode|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25850" PostTypeId="1" CreationDate="2020-10-20T12:02:25.900" Score="0" ViewCount="270" Body="&lt;p&gt;First of all, I love elementary OS. It's super easy to use, looks great and is fast. Some of my friends and family are using it after my recommendation as well and are quite pleased with it.&#xA;The only thing, I really miss, is an &lt;strong&gt;AUTOMATIC UPDATE FUNCTION&lt;/strong&gt;, not only for security updates, but for all installed applications and the system as well. I would really love to install elementary OS 6 on my mothers computer, but unfortunately she is 75 and not able to do manually updates on her own, like a lot of others who are older. We can't expect technical understanding from the elderly generation.&lt;/p&gt;&#xA;&lt;p&gt;Linux Mint has it implemented already and it is working great and stable according to a friend of mine. Of course he is using Timeshift to make system snapshots regularly.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;My question is, can we expect to have a system wide Auto Update function in elementary OS 6 in the near future?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Best regards and thank you for your great work!&#xA;Shaka&lt;/p&gt;&#xA;" OwnerUserId="24222" LastEditorUserId="24222" LastEditDate="2020-10-20T12:17:10.277" LastActivityDate="2024-02-05T22:08:10.963" Title="Will there be an automatic update function integrated in the final version of elementary OS 6?" Tags="|updates|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25852" PostTypeId="1" CreationDate="2020-10-20T20:17:30.040" Score="0" ViewCount="62" Body="&lt;p&gt;I installed linssid from appcenter and it wont launch. It only launchs from the terminal using sudo. how can I fix this?&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2024-03-04T05:02:25.273" Title="Why I can only launch linssid from terminal using sudo" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25853" PostTypeId="2" ParentId="25831" CreationDate="2020-10-20T20:32:58.537" Score="0" Body="&lt;p&gt;Hi I have a macmini 2009 and the os is broken tried to repair it and fsck-ed it under single user mode but nothing worked. Bought a new mac air this could read the old hard drive in an external enclosure and could move the data from the old 500gb hard drive. Now I want to install elementary OS on the old mac mini. But how to do this when the mac OS is broke. I don't want to mess up the new mac. So i use a windows computer. Anyway I wil try to install elementary os and let you know.&lt;/p&gt;&#xA;" OwnerUserId="24227" LastActivityDate="2020-10-20T20:32:58.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25854" PostTypeId="2" ParentId="25852" CreationDate="2020-10-20T21:14:33.213" Score="0" Body="&lt;p&gt;I think this is because an outaged version of linssid in appcenter (2.9 I guess). The way how to get Super User privileges in GUI has meanwhile probably changed (you will need administrative privileges to sniff network traffic).&lt;/p&gt;&#xA;&lt;p&gt;You can download an updated version from &lt;a href=&quot;https://sourceforge.net/projects/linssid/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; and install the deb manually or add a ppa to your system and install via terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:wseverin/ppa&#xA;sudo apt update&#xA;sudo apt install linssid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Please consider &lt;a href=&quot;https://askubuntu.com/questions/35629/are-ppas-safe-to-add-to-my-system-and-what-are-some-red-flags-to-watch-out-for&quot;&gt;this&lt;/a&gt; (old but still relevant) question and answer when adding external repos to your system.&lt;/p&gt;&#xA;" OwnerUserId="107" LastActivityDate="2020-10-20T21:14:33.213" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25855" PostTypeId="2" ParentId="9865" CreationDate="2020-10-20T21:46:19.490" Score="0" Body="&lt;p&gt;Noise is designed to use the system volume settings (just like Audience/Videos app). I guess having two different controls for volume (system versus in-app) is considered confusing. I have met people confused about volume on their own (Windows) machine, so I get that it can be seen as a problem.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2020-10-20T21:46:19.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25856" PostTypeId="1" CreationDate="2020-10-22T03:52:09.327" Score="0" ViewCount="68" Body="&lt;p&gt;This morning I update My Elementary OS, but after update has finished, I can not log in to my Elementary OS, it says, &amp;quot;session returned error code 1&amp;quot;&#xA;I've try to install the newest graphic driver but the problem is still unsolved. Please help me, I'm so noob in linux. Thanks&lt;/p&gt;&#xA;" OwnerUserId="24230" LastActivityDate="2024-03-11T18:00:30.117" Title="Unable to log in after update Elementary OS" Tags="|release-hera|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25858" PostTypeId="2" ParentId="25609" CreationDate="2020-10-22T09:48:19.920" Score="0" Body="&lt;p&gt;I've managed to solve my issue with this by going back to an old kernel version. Have you tried that at all?&lt;/p&gt;&#xA;" OwnerUserId="24228" LastActivityDate="2020-10-22T09:48:19.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25860" PostTypeId="1" CreationDate="2020-10-22T14:39:35.667" Score="1" ViewCount="17" Body="&lt;p&gt;the network manager menu in the upper right corner of ElementaryOS provides a switch to deactive the network connection. In environments with network login this can cause freezing the current session.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to remove/deactivate the switch for switching on/off the network?&lt;/p&gt;&#xA;" OwnerUserId="23520" LastActivityDate="2020-10-22T14:39:35.667" Title="Prevent users from deactivating network connection?" Tags="|networking|pantheon|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25861" PostTypeId="2" ParentId="25831" CreationDate="2020-10-22T19:34:59.077" Score="0" Body="&lt;p&gt;I just recently installed eOS 5.1 on 2009 iMac elCapitan and the install went fine.  Beautiful looking UI and I hope that I can get my bugs worked out so that I can stick with it.  I'm very new to Linux and first installed Linux Mint about a month ago so I'm just learning how to move around in Linux. I found eOS a week or so ago and have been using it since.  Here is the bugs I have so far so if you know how to fix it I'd love the help:&lt;/p&gt;&#xA;&lt;p&gt;--Once the computer goes to suspend and turns the display off, coming back (mouse,spacebar, etc..) doesn't turn it back on.  The computer is awake since anticipating this if I instead enter the user password (with the screen black) and enter, I login and the display turns back on.  Mint didn't have this issue. This annoys my wife fiercely.&lt;/p&gt;&#xA;&lt;p&gt;--The bluetooth &amp;quot;Magic Mouse&amp;quot; loses connection so often that it's better to use the usb mouse.  Mint didn't have this issue. This annoys my wife fiercely.&lt;/p&gt;&#xA;&lt;p&gt;--I can't get the superdrive to play a dvd-- Tried different programs (VLC, etc..) I have Linux Mint installed on a similarly old macbook and plays dvd's fine.  I don't play many dvd's so it's not a real issue, but annoys me not-fiercely.&lt;/p&gt;&#xA;" OwnerUserId="24235" LastActivityDate="2020-10-22T19:34:59.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25863" PostTypeId="1" AcceptedAnswerId="25865" CreationDate="2020-10-23T14:23:57.540" Score="0" ViewCount="92" Body="&lt;p&gt;Cannot get past the first step, which requires changing permissions on the Eset installer. Has anyone else installed Eset Nod32 for Linux home successfully on Elementary OS? If so, how?&lt;/p&gt;&#xA;" OwnerUserId="24239" LastEditorUserId="15904" LastEditDate="2020-11-19T08:37:24.950" LastActivityDate="2020-11-19T08:37:24.950" Title="Unable to install Eset Nod32" Tags="|applications|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25864" PostTypeId="1" CreationDate="2020-10-23T17:37:07.910" Score="1" ViewCount="551" Body="&lt;p&gt;As I understand elementary is compatible with secure boot. However, I wasn't able to boot from usb without disabling secure boot, and now that the os is installed, it will only boot with secure boot disabled (it does not recognize elementary as authorized). It does seem that boot/efi was created on install. I used &amp;quot;erase disk and install elementary&amp;quot; option. What might I be missing here?&lt;/p&gt;&#xA;" OwnerUserId="24244" LastActivityDate="2024-03-09T23:06:45.777" Title="secure boot problems" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25865" PostTypeId="2" ParentId="25863" CreationDate="2020-10-23T22:14:51.623" Score="0" Body="&lt;p&gt;Right click on the file and click Properties. Under Permissions set &lt;strong&gt;Owner&lt;/strong&gt; to Execute.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/z67t5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/z67t5.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8902" LastEditorUserId="8902" LastEditDate="2020-10-23T22:21:24.687" LastActivityDate="2020-10-23T22:21:24.687" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25871" PostTypeId="1" CreationDate="2020-10-25T11:26:32.000" Score="0" ViewCount="119" Body="&lt;p&gt;To avoid Emacs installed through AppCenter crashing on opening, solution was actually explained &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/797/how-to-get-gnu-emacs-work-on-elementary-os&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;But AppCenter only offers Emacs25 so I installed Emacs27 through Flathub (built in AppCenter)... except now the solution offered in the post mentioned above doesn't work anymore (different file paths etc.).&lt;/p&gt;&#xA;&lt;p&gt;Any help? I think this could be as simple as copying &lt;code&gt;XLIB_SKIP_ARGB_VISUALS=1&lt;/code&gt; somewhere else, but I wasn't able to understand where :(&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="23521" LastActivityDate="2024-02-16T06:00:35.050" Title="How to get GNU Emacs from Flathub work on elementary OS?" Tags="|appcenter|gtk|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25872" PostTypeId="2" ParentId="24684" CreationDate="2020-10-26T12:23:30.363" Score="0" Body="&lt;p&gt;I had the same problem.&#xA;The correct way to do it is to follow the official instructions for Debian/Ubuntu at...:&#xA;&lt;a href=&quot;https://www.spotify.com/nl/download/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.spotify.com/nl/download/linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2020-10-26T12:23:30.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25873" PostTypeId="2" ParentId="25864" CreationDate="2020-10-26T13:14:08.450" Score="0" Body="&lt;p&gt;To my knowledge, Secure Boot will not allow you to boot a Live USB. And to boot Elementary in Secure Boot after install, you need to set your BIOS Secure Boot option to SETUP MODE. This way, Elementary will be added as Authorized automatically and it will boot. Just worked for me. Check it out and let me know.&lt;/p&gt;&#xA;" OwnerUserId="15844" LastActivityDate="2020-10-26T13:14:08.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25874" PostTypeId="1" CreationDate="2020-10-26T21:10:41.647" Score="0" ViewCount="308" Body="&lt;p&gt;Just can't make ElementaryOS 5.1.7 Hera detect my DisplayPort connected display.&#xA;I'm using a GeForce GTX 1050 with Nvidia's 450 driver and notebook display and HDMI connection works perfectly.&lt;/p&gt;&#xA;&lt;p&gt;Since I'm completely new to linux, I may be missing something obvious.&lt;/p&gt;&#xA;&lt;p&gt;Here is the Display Settings:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JdKST.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JdKST.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The Display works fine in other sources via displayPort, and even works from ElementaryOS when connected through HDMI.&lt;/p&gt;&#xA;&lt;p&gt;Also, here's the driver info:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/g5o3n.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g5o3n.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RYYMI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RYYMI.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24259" LastEditorUserId="15904" LastEditDate="2020-11-19T08:37:12.043" LastActivityDate="2024-04-02T16:04:45.563" Title="Cannot detect monitor connected to DisplayPort on Elementary 5.1.7 Hera" Tags="|release-hera|display|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25875" PostTypeId="1" AcceptedAnswerId="25943" CreationDate="2020-10-26T22:48:59.690" Score="1" ViewCount="90" Body="&lt;p&gt;I'm toying with using kickstart config files to do automated installations for both Fedora &amp;amp; Ubuntu, and using post-installation commands to run Ansible configs to produce fully provisioned machines with no or little user input.&lt;/p&gt;&#xA;&lt;p&gt;I'd love to be able to do this for Elementary, as I am keen to get some friends/family on this ideal distro, and I'd like to be able to spin up tailored installations quickly and effortlessly.&lt;/p&gt;&#xA;&lt;p&gt;Even just being able to set all of the usual options in the installer without any input would be great.&lt;/p&gt;&#xA;&lt;p&gt;Is anything like this possible?&lt;/p&gt;&#xA;" OwnerUserId="24260" LastEditorUserId="24260" LastEditDate="2020-10-27T01:04:55.853" LastActivityDate="2020-11-10T11:38:43.170" Title="'Kickstart'-style automated installation for Elementary" Tags="|system-installation|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25877" PostTypeId="2" ParentId="19147" CreationDate="2020-10-27T11:01:12.003" Score="0" Body="&lt;p&gt;In my case I'm using &lt;a href=&quot;https://www.lenovo.com/us/en/laptops/thinkpad/thinkpad-t-series/ThinkPad-T14-AMD-G1/p/20UD0007US&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.lenovo.com/us/en/laptops/thinkpad/thinkpad-t-series/ThinkPad-T14-AMD-G1/p/20UD0007US&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and external monitors are not working. Tried POP OS - works ok&lt;/p&gt;&#xA;" OwnerUserId="17884" LastActivityDate="2020-10-27T11:01:12.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25878" PostTypeId="2" ParentId="9801" CreationDate="2020-10-27T12:58:22.310" Score="0" Body="&lt;p&gt;People have suggested you make a .desktop file. However you could also just drag and drop an image file (transparent or a vertical line based on the kind of separator you want) in the dock which is much easier.&lt;/p&gt;&#xA;" OwnerUserId="24263" LastActivityDate="2020-10-27T12:58:22.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25884" PostTypeId="2" ParentId="25874" CreationDate="2020-10-28T09:14:11.973" Score="0" Body="&lt;p&gt;open app center and search for nvidia-drivers or type in terminal &lt;code&gt;apt search nvidia-drivers&lt;/code&gt; and find the appropriate drivers for you. i think 440 and 450 (nvidia-drivers-440 or 450) would be the best match.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2020-10-28T09:14:11.973" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="25885" PostTypeId="2" ParentId="25856" CreationDate="2020-10-28T09:18:08.480" Score="0" Body="&lt;p&gt;try &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; and try to log in. and please provide screenshots as i think your update was related to a nvidia driver update.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2020-10-28T09:18:08.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25886" PostTypeId="1" CreationDate="2020-10-28T19:16:21.353" Score="0" ViewCount="180" Body="&lt;p&gt;when opening any site that require &lt;strong&gt;mic&lt;/strong&gt; or &lt;strong&gt;webcam&lt;/strong&gt; permission on &lt;em&gt;epiphany&lt;/em&gt; theres no way i can give permission so i am unable to use any of these&lt;/p&gt;&#xA;&lt;p&gt;unfortunately mic and webcam works fine in chrome (on elementary)&#xA;any suggestions??? or its bug...&lt;/p&gt;&#xA;" OwnerUserId="24273" LastEditorUserId="24273" LastEditDate="2020-10-28T19:21:32.323" LastActivityDate="2024-03-12T08:10:01.143" Title="mic and webcam permission error on epiphany" Tags="|epiphany|webcam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25887" PostTypeId="2" ParentId="25886" CreationDate="2020-10-28T19:29:08.347" Score="0" Body="&lt;p&gt;Unfortunately WebKitGTK does not support WebRTC, and will not for the foreseeable future, so there is no way to use these websites. Sorry.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2020-10-28T19:29:08.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25888" PostTypeId="2" ParentId="18863" CreationDate="2020-10-29T07:50:23.693" Score="1" Body="&lt;p&gt;I followed these &lt;a href=&quot;https://support.nordvpn.com/Connectivity/Linux/1325531132/Installing-and-using-NordVPN-on-Debian-Ubuntu-Elementary-OS-and-Linux-Mint.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;instructions&lt;/a&gt; but do not follow the video it was misleading for me:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# installation&#xA;cd ~/Downloads&#xA;&#xA;wget -qnc https://repo.nordvpn.com/deb/nordvpn/debian/pool/main/nordvpn-release_1.0.0_all.deb&#xA;&#xA;sudo dpkg -i ./nordvpn-release_1.0.0_all.deb # make sure there is no other program being installed before running this command&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install nordvpn&#xA;&#xA;# then you can login&#xA;nordvpn login&#xA;nordvpn connect Australia&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24268" LastActivityDate="2020-10-29T07:50:23.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25890" PostTypeId="2" ParentId="25652" CreationDate="2020-10-29T20:14:20.903" Score="0" Body="&lt;p&gt;In the case of normal updates, this problem appears to be solved.&lt;/p&gt;&#xA;" OwnerUserId="23919" LastActivityDate="2020-10-29T20:14:20.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25896" PostTypeId="1" AcceptedAnswerId="26610" CreationDate="2020-10-30T19:26:27.443" Score="1" ViewCount="143" Body="&lt;p&gt;Does normal GRUB behaviour match my description below?&lt;/p&gt;&#xA;&lt;p&gt;My original description follows; I edited my question to enable a yes/no answer. If others feel my GRUB is behaving as expected, I will focus on hardware issues and assume Elementary OS has nothing to do with my boot problem, and consider this answered.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I want my laptop to boot reliably. Boot fails if I leave it powered&#xA;down for about 3 days, otherwise well-behaved. I hope advice here can&#xA;help me understand what to investigate.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Dell Latitude D830&lt;/li&gt;&#xA;&lt;li&gt;4GB RAM&lt;/li&gt;&#xA;&lt;li&gt;boot 500GB SATA SSD&lt;/li&gt;&#xA;&lt;li&gt;Elementary OS 5.1.7 Hera&lt;/li&gt;&#xA;&lt;li&gt;original Win7 HDD no problems&lt;/li&gt;&#xA;&lt;li&gt;swapped HDD with SSD and Elementary Juno after coffee tragedy&lt;/li&gt;&#xA;&lt;li&gt;no change fresh PRAM battery&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;After lengthy power-down periods, boot goes to GRUB. Workaround by&#xA;selecting &amp;lt;Advanced options for elementary/elementary, with linux&#xA;4.15.0-122-generic (recovery mode)&amp;gt;. This option fails automatic checks and requests to run fsck manually. I run fsck manually on the&#xA;only drive I know, &amp;lt;fsck /dev/sda1&amp;gt;—&amp;quot;all&amp;quot; switch doesn't find it—then&#xA;reboot behaves properly and waits for input at the Elementary OS&#xA;graphical login prompt. I never experience odd behaviour while in use.&#xA;I've tried &amp;quot;Boot Repair&amp;quot; application, but after reporting repairs it&#xA;lacks long-term effect.&lt;/p&gt;&#xA;&lt;p&gt;2 anomalies:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;sometimes I reboot and need to repeat fsck again, but I always win in the end&lt;/li&gt;&#xA;&lt;li&gt;sometimes I'll make it as far as using the Elementary graphic interface, then AppCentre updates choke, black screen reboot, then&#xA;GRUB reboot. Never happens elsewhere, only occasionally during&#xA;AppCentre updates on boot.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Is the Elementary/Linux side of things behaving as expected?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="19205" LastEditorUserId="19205" LastEditDate="2020-11-06T18:23:41.307" LastActivityDate="2021-03-03T07:01:39.960" Title="GRUB and file system recovery behaviour, after lengthy shutdown" Tags="|boot|grub|ssd|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="25897" PostTypeId="1" CreationDate="2020-10-31T06:23:22.463" Score="0" ViewCount="65" Body="&lt;p&gt;I have a fresh install of &lt;em&gt;elementaryos 5.1.7&lt;/em&gt; on &lt;em&gt;ubuntu 18.04.4&lt;/em&gt; on an otherwise os-less 2008 macbook, and in classic fashion I'm trying to install &lt;em&gt;bcmwl-kernel-source&lt;/em&gt; to turn on my wifi. I think I've installed all the necessary packages and dependencies with some flash drive hopping, but when I try to dpkg the folder the installation fails and tells me&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i *.deb&#xA;[sudo] password for funandoatmeal:          &#xA;(Reading database ... 144607 files and directories currently installed.)&#xA;Preparing to unpack bcmwl-kernel-source_6.30.223.271+bdcom-0ubuntu4_amd64.deb ...&#xA;Removing all DKMS Modules&#xA;Done.&#xA;Unpacking bcmwl-kernel-source (6.30.223.271+bdcom-0ubuntu4) over (6.30.223.271+bdcom-0ubuntu4) ...&#xA;Preparing to unpack dkms_2.3-3ubuntu9_all.deb ...&#xA;Unpacking dkms (2.3-3ubuntu9) over (2.3-3ubuntu9) ...&#xA;Preparing to unpack dpkg-dev_1.19.0.5ubuntu2_all.deb ...&#xA;Unpacking dpkg-dev (1.19.0.5ubuntu2) over (1.19.0.5ubuntu2) ...&#xA;Preparing to unpack gcc_7.4.0-1ubuntu2.3_amd64.deb ...&#xA;Unpacking gcc (4:7.4.0-1ubuntu2.3) over (4:7.4.0-1ubuntu2.3) ...&#xA;Preparing to unpack gcc-7_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking gcc-7 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack gcc-7-base_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking gcc-7-base:amd64 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack gcc-8-base_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking gcc-8-base:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libasan4_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libasan4:amd64 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack libatomic1_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libatomic1:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libc6_2.27-3ubuntu1.2_amd64.deb ...&#xA;Unpacking libc6:amd64 (2.27-3ubuntu1.2) over (2.27-3ubuntu1.2) ...&#xA;Preparing to unpack libc6-dev_2.27-3ubuntu1.2_amd64.deb ...&#xA;Unpacking libc6-dev:amd64 (2.27-3ubuntu1.2) over (2.27-3ubuntu1.2) ...&#xA;Preparing to unpack libcc1-0_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libcc1-0:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libc-dev-bin_2.27-3ubuntu1.2_amd64.deb ...&#xA;Unpacking libc-dev-bin (2.27-3ubuntu1.2) over (2.27-3ubuntu1.2) ...&#xA;Preparing to unpack libcilkrts5_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libcilkrts5:amd64 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack libdpkg-perl_1.19.0.5ubuntu2_all.deb ...&#xA;Unpacking libdpkg-perl (1.19.0.5ubuntu2) over (1.19.0.5ubuntu2) ...&#xA;Preparing to unpack libgcc1_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libgcc1:amd64 (1:8.4.0-1ubuntu1~18.04) over (1:8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libgcc-7-dev_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libgcc-7-dev:amd64 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack libitm1_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libitm1:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack liblsan0_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking liblsan0:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libmpx2_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libmpx2:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libquadmath0_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libquadmath0:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libtsan0_8.4.0-1ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libtsan0:amd64 (8.4.0-1ubuntu1~18.04) over (8.4.0-1ubuntu1~18.04) ...&#xA;Preparing to unpack libubsan0_7.5.0-3ubuntu1~18.04_amd64.deb ...&#xA;Unpacking libubsan0:amd64 (7.5.0-3ubuntu1~18.04) over (7.5.0-3ubuntu1~18.04) ...&#xA;Preparing to unpack linux-libc-dev_4.15.0-122.124_amd64.deb ...&#xA;Unpacking linux-libc-dev:amd64 (4.15.0-122.124) over (4.15.0-122.124) ...&#xA;Preparing to unpack make_4.1-9.1ubuntu1_amd64.deb ...&#xA;Unpacking make (4.1-9.1ubuntu1) over (4.1-9.1ubuntu1) ...&#xA;Setting up gcc-7-base:amd64 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up gcc-8-base:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libdpkg-perl (1.19.0.5ubuntu2) ...&#xA;Setting up linux-libc-dev:amd64 (4.15.0-122.124) ...&#xA;Setting up libc6:amd64 (2.27-3ubuntu1.2) ...&#xA;Setting up libc-dev-bin (2.27-3ubuntu1.2) ...&#xA;Setting up libgcc1:amd64 (1:8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libitm1:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up liblsan0:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libmpx2:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libquadmath0:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libtsan0:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libubsan0:amd64 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up make (4.1-9.1ubuntu1) ...&#xA;Setting up dpkg-dev (1.19.0.5ubuntu2) ...&#xA;Setting up libasan4:amd64 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up libatomic1:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libc6-dev:amd64 (2.27-3ubuntu1.2) ...&#xA;Setting up libcc1-0:amd64 (8.4.0-1ubuntu1~18.04) ...&#xA;Setting up libcilkrts5:amd64 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up libgcc-7-dev:amd64 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up gcc-7 (7.5.0-3ubuntu1~18.04) ...&#xA;Setting up gcc (4:7.4.0-1ubuntu2.3) ...&#xA;Setting up dkms (2.3-3ubuntu9) ...&#xA;Setting up bcmwl-kernel-source (6.30.223.271+bdcom-0ubuntu4) ...&#xA;Loading new bcmwl-6.30.223.271+bdcom DKMS files...&#xA;Building for 5.4.0-42-generic&#xA;Building for architecture x86_64&#xA;Building initial module for 5.4.0-42-generic&#xA;Error! Bad return status for module build on kernel: 5.4.0-42-generic (x86_64)&#xA;Consult /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/make.log for more information.&#xA;modprobe: FATAL: Module wl not found in directory /lib/modules/5.4.0-42-generic&#xA;update-initramfs: deferring update (trigger activated)&#xA;Processing triggers for man-db (2.8.3-2ubuntu0.1) ...&#xA;Processing triggers for libc-bin (2.27-3ubuntu1.2) ...&#xA;Processing triggers for initramfs-tools (0.130ubuntu3.9) ...&#xA;update-initramfs: Generating /boot/initrd.img-5.4.0-42-generic&#xA;I: The initramfs will attempt to resume from /dev/dm-2&#xA;I: (/dev/mapper/elementary--vg-swap_1)&#xA;I: Set the RESUME variable to override this.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;s&lt;/p&gt;&#xA;&lt;p&gt;And make.log tells me this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;DKMS make.log for bcmwl-6.30.223.271+bdcom for kernel 5.4.0-42-generic (x86_64)&#xA;Fri Oct 30 12:13:42 PDT 2020&#xA;make: Entering directory '/usr/src/linux-headers-5.4.0-42-generic'&#xA;CFG80211 API is prefered for this kernel version&#xA;Using CFG80211 API&#xA;  AR      /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/built-in.a&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/shared/linux_osl.o&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.o&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c: In function ‘wl_pci_probe’:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:780:2: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]&#xA;  if ((val &amp;amp; 0x0000ff00) != 0)&#xA;  ^~&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_linux.c:782:3: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’&#xA;   bar1_size = pci_resource_len(pdev, 2);&#xA;   ^~~~~~~~~&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_iw.o&#xA;  CC [M]  /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.o&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_dev_ioctl’:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:462:9: error: implicit declaration of function ‘get_ds’; did you mean ‘get_fs’? [-Werror=implicit-function-declaration]&#xA;  set_fs(get_ds());&#xA;         ^~~~~~&#xA;         get_fs&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:462:9: error: incompatible type for argument 1 of ‘set_fs’&#xA;In file included from ./include/linux/uaccess.h:11:0,&#xA;                 from ./arch/x86/include/asm/fpu/xstate.h:5,&#xA;                 from ./arch/x86/include/asm/pgtable.h:26,&#xA;                 from ./include/linux/mm.h:99,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/include/linuxver.h:65,&#xA;                 from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:26:&#xA;./arch/x86/include/asm/uaccess.h:29:20: note: expected ‘mm_segment_t {aka struct &amp;lt;anonymous&amp;gt;}’ but argument is of type ‘int’&#xA; static inline void set_fs(mm_segment_t fs)&#xA;                    ^~~~~~&#xA;In file included from /var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:40:0:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c: In function ‘wl_set_auth_type’:&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.h:52:5: warning: this statement may fall through [-Wimplicit-fallthrough=]&#xA;  if (wl_dbg_level &amp;amp; WL_DBG_DBG) {   \&#xA;     ^&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:816:3: note: in expansion of macro ‘WL_DBG’&#xA;   WL_DBG((&amp;quot;network eap\n&amp;quot;));&#xA;   ^~~~~~&#xA;/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.c:817:2: note: here&#xA;  default:&#xA;  ^~~~~~~&#xA;cc1: some warnings being treated as errors&#xA;scripts/Makefile.build:273: recipe for target '/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.o' failed&#xA;make[1]: *** [/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build/src/wl/sys/wl_cfg80211_hybrid.o] Error 1&#xA;Makefile:1731: recipe for target '/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build' failed&#xA;make: *** [/var/lib/dkms/bcmwl/6.30.223.271+bdcom/build] Error 2&#xA;make: Leaving directory '/usr/src/linux-headers-5.4.0-42-generic'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I don't have much advanced or even intermediate linux knowledge, so I'd appreciate being walked through this some.&#xA;Big thanks and apologies&lt;/p&gt;&#xA;" OwnerUserId="24286" LastEditorUserId="15904" LastEditDate="2020-11-10T00:07:53.317" LastActivityDate="2020-11-10T00:07:53.317" Title="Bad return status for 5.4.0-42-generic (x86_64)" Tags="|release-hera|kernel|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25898" PostTypeId="2" ParentId="20887" CreationDate="2020-10-31T16:10:14.850" Score="0" Body="&lt;p&gt;It might be because of how Elementary OS is released. Juno currently ships with Ubuntu 18.* LTS as it's base. It might be that the trackpad issue was solved in Ubuntu 20.* which is the latest version.&lt;/p&gt;&#xA;" OwnerUserId="14519" LastActivityDate="2020-10-31T16:10:14.850" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25900" PostTypeId="2" ParentId="25755" CreationDate="2020-11-01T10:56:29.673" Score="0" Body="&lt;p&gt;I use Radiotray-NG: An Internet radio player for Linux&#xA;more info: &lt;a href=&quot;https://github.com/ebruck/radiotray-ng&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ebruck/radiotray-ng&lt;/a&gt;&#xA;and if anyone ask how you see the icon in the systemtray:&#xA;&lt;a href=&quot;https://www.reallinuxuser.com/how-to-show-app-indicators-on-the-system-tray-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reallinuxuser.com/how-to-show-app-indicators-on-the-system-tray-in-elementary-os/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22772" LastEditorUserId="22772" LastEditDate="2020-11-01T22:47:50.370" LastActivityDate="2020-11-01T22:47:50.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25903" PostTypeId="2" ParentId="25826" CreationDate="2020-11-01T18:35:04.447" Score="0" Body="&lt;p&gt;Depends on the SECURE BOOT BIOS which you are using ... you need to set a new value for the  restored partitions which currently dont pass the verifiction of your secure boot.&lt;/p&gt;&#xA;" OwnerUserId="24281" LastActivityDate="2020-11-01T18:35:04.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25905" PostTypeId="2" ParentId="18970" CreationDate="2020-11-02T01:58:20.610" Score="0" Body="&lt;p&gt;Since this is the first result when searching for &amp;quot;korean keyboard elemntary os&amp;quot;, I would like to add this answer, as Hasan commented, as well as for my own future reference.&lt;/p&gt;&#xA;&lt;p&gt;My use case is: I have a US QWERTY keyboard using elementary OS 5.1.7 Hera and I want to type in 한굴.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to Keyboard Settings (CMD + SPACE + keyboard)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/d4aK4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/d4aK4.png&quot; alt=&quot;Search Keyboard Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Go to &amp;quot;Input Method&amp;quot; tab (enable it if not yet enabled) and click the bottom  left plus (+) sign and type &amp;quot;hangul&amp;quot; then click &amp;quot;Add Engine&amp;quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/hxoq9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hxoq9.png&quot; alt=&quot;Add hangul as input method&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Configure input method to use ibus by default (see also &lt;a href=&quot;https://elementaryos.stackexchange.com/a/18660&quot;&gt;https://elementaryos.stackexchange.com/a/18660&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;# open terminal (CMD + t)&#xA;im-config&#xA;&#xA;# in GUI&#xA;# click Ok&#xA;# click Yes&#xA;# select ibus&#xA;# click Ok&#xA;# click Ok&#xA;&#xA;reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Try typing in 한굴 by toggling via the Right Alt key. If that doesn't work try Shift + Space.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;(I found out about the right alt key in the Layout tab of the keyboard settings, there is no need to set Korean keyboard in Layout, just in Input Method).&lt;/p&gt;&#xA;" OwnerUserId="17988" LastActivityDate="2020-11-02T01:58:20.610" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25907" PostTypeId="1" CreationDate="2020-11-03T04:40:35.960" Score="0" ViewCount="385" Body="&lt;p&gt;Occasionally, when opening an app, a duplicate (blurrier) icon will appear in the Plank dock, and the app's normal icon already kept in the dock will not display an indicator.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JwB5d.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JwB5d.png&quot; alt=&quot;Blurry duplicate of AppCenter icon&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When this happens, said app's window will show a gear icon in multi-tasking view, as shown below, as well as window spread view and the alt-tab switcher as well.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/o7Lq6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/o7Lq6.jpg&quot; alt=&quot;Gear icons over application in Window Spread view&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24265" LastActivityDate="2024-03-16T23:03:25.380" Title="Duplicate icons in dock, and gear icons in multitasking / window spread views" Tags="|applications|plank|icons|multitasking-view|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25908" PostTypeId="1" AcceptedAnswerId="25910" CreationDate="2020-11-03T17:14:59.677" Score="0" ViewCount="33" Body="&lt;p&gt;I cant find the keyboard language from the list suggested or the detection mechanism (assign english).&lt;/p&gt;&#xA;&lt;p&gt;apparently it is english yet no english version from the list is compatible.&lt;/p&gt;&#xA;&lt;p&gt;this is how it is:&lt;/p&gt;&#xA;&lt;p&gt;a z e r t y u i o p [{ ]} |\&lt;/p&gt;&#xA;&lt;p&gt;q s d f g h j k l m '&amp;quot; enter&lt;/p&gt;&#xA;&lt;p&gt;w x c v b n ;: ,&amp;lt; .&amp;gt; ?/ shift&lt;/p&gt;&#xA;&lt;p&gt;if i cant find it, can i somehow customize it.&lt;/p&gt;&#xA;" OwnerUserId="24306" LastEditorUserId="24306" LastEditDate="2020-11-03T20:01:14.917" LastActivityDate="2020-11-03T20:01:14.917" Title="keyboard layout language is not detectable" Tags="|keyboard|language|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25910" PostTypeId="2" ParentId="25908" CreationDate="2020-11-03T20:00:39.177" Score="0" Body="&lt;p&gt;while i had 3 keys swapped, so i changed the file &lt;code&gt;/usr/share/X11/xkb/symbols/us&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24306" LastActivityDate="2020-11-03T20:00:39.177" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25911" PostTypeId="1" CreationDate="2020-11-03T20:29:40.553" Score="1" ViewCount="115" Body="&lt;pre&gt;&lt;code&gt;git clone https://github.com/lwfinger/rtw88.git&#xA;cd rtw88&#xA;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;its worked finally&lt;/p&gt;&#xA;" OwnerUserId="24308" LastEditorUserId="9699" LastEditDate="2020-11-18T09:34:27.683" LastActivityDate="2020-11-18T09:34:27.683" Title="Magicbook 14 (amd version) wifi drivers not working realtek 8821ce (SOVLED)" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25913" PostTypeId="1" AcceptedAnswerId="25936" CreationDate="2020-11-04T17:08:54.330" Score="0" ViewCount="491" Body="&lt;p&gt;When I start AppCenter, it runs for a few seconds and then crashes. I tried reinstalling AppCenter as suggested &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11649/appcenter-doesnt-start-metadata-files-have-errors&quot;&gt;in this answer&lt;/a&gt;, but that didn't fix the problem.&lt;/p&gt;&#xA;&lt;p&gt;Initially, AppCenter started without crashing, but it would fail to install some updates. I updated by doing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt-get update&#xA;apt-get upgrade&#xA;apt-get --with-new-pkgs upgrade&#xA;apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now my packages are up to date, but AppCenter crashes at startup.&lt;/p&gt;&#xA;&lt;p&gt;When I run &lt;code&gt;io.elementary.appcenter&lt;/code&gt; from the Terminal, I see these logs:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;(process:7122): dconf-WARNING **: 11:30:43.965: Unable to open /home/ryan/.local/share/flatpak/exports/share/dconf/profile/user: Permission denied&#xA;&#xA;** (io.elementary.appcenter:7122): CRITICAL **: 11:30:44.060: ComponentValidator.vala:37: Using .blacklist files is deprecated and will be removed in next version, please use .hiddenapps instead&#xA;&#xA;(process:7130): dconf-WARNING **: 11:30:44.346: Unable to open /home/ryan/.local/share/flatpak/exports/share/dconf/profile/user: Permission denied&#xA;&#xA;** (io.elementary.appcenter:7122): CRITICAL **: 11:30:44.353: FlatpakBackend.vala:186: Unable to get flatpak user installation : While opening repository /home/ryan/.local/share/flatpak/repo: /home/ryan/.local/share/flatpak/repo: opendir(/home/ryan/.local/share/flatpak/repo): Permission denied&#xA;&#xA;** (io.elementary.appcenter:7122): WARNING **: 11:30:44.354: FlatpakBackend.vala:123: Couldn't create user Installation File Monitor due to no installation&#xA;Segmentation fault&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any thoughts on what might be happening or how I could fix the problem? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2020-11-09T11:57:07.883" Title="AppCenter crashes after a few seconds" Tags="|updates|appcenter|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25914" PostTypeId="2" ParentId="25850" CreationDate="2020-11-04T23:04:47.997" Score="0" Body="&lt;p&gt;Automatic updates would be cool! This feature doesn't appear to be planned for elementary OS 6, but it could be added in the future.&lt;/p&gt;&#xA;&lt;p&gt;There is a &lt;a href=&quot;https://github.com/elementary/appcenter/issues/288&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub issue for automatic updates&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/appcenter/issues/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;another issue for automatic security updates&lt;/a&gt;. That said, this feature doesn't appear to be in development, and there's no mention of such a feature in &lt;a href=&quot;https://blog.elementary.io/updates-for-july-2020/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this elementary OS 6 update&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The good news is that there are bounties on both of those issues, and the elementary OS team does seem to be in favor of implementing automatic updates.&lt;/p&gt;&#xA;" OwnerUserId="792" LastActivityDate="2020-11-04T23:04:47.997" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25915" PostTypeId="1" CreationDate="2020-11-05T11:40:01.083" Score="3" ViewCount="684" Body="&lt;p&gt;Good morning to all.&#xA;I use two languages in my laptop. English US and Greek languages. In my first installation of Elementary the indicator was at the top right corner without to do something special for this. After a problem I reinstall Elementary and it's not possible anymore to see the indicator. It's difficult to work because I don't know every time what language I'm using. The OS is Elementary 5.1.7 Hera. Any idea? Any suggestion?&lt;/p&gt;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="24317" LastActivityDate="2020-11-26T21:09:19.023" Title="Problem with keyboard language indicator" Tags="|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25916" PostTypeId="2" ParentId="24400" CreationDate="2020-11-05T17:48:30.343" Score="2" Body="&lt;p&gt;I had the same problem, but &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/hbc84k/flatpak_icons_on_dock/fv81km3/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this Reddit thread&lt;/a&gt; explained the problem, pointing toward &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/one-of-my-apps-has-a-second-fuzzy-icon-in-plank-how-can-i-workaround-this&quot;&gt;this answer&lt;/a&gt; to solve it. This is a generic problem with Flatpak apps.&lt;/p&gt;&#xA;&lt;p&gt;Follow the second link to solve the problem. The only difference is that the .desktop file is in &lt;code&gt;~/.local/share/flatpak/exports/share/applications&lt;/code&gt; and the line to be added is &lt;code&gt;StartupWMClass=Firefox&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="24318" LastActivityDate="2020-11-05T17:48:30.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25918" PostTypeId="2" ParentId="24174" CreationDate="2020-11-06T04:26:13.210" Score="0" Body="&lt;p&gt;I like this thread.  I have same issue on fresh install of Hera 5.1.7 on HP Pavilion g Series, Core I3 (2.53GHz 2x), 8GB RAM, factory graphics.  Setup Admin User account during installation.  Once installed, I updated all packages.  Then activated first user account ('Standard'), restarted the system and attempted to login under Standard account and I get the jiggle and shake login box, cursor resets in test frame on login box.  The first 'Standard' user account was added under &amp;quot;My Account&amp;quot; as the Administrator.  I deleted that user account and added the same Standard user info. under &amp;quot;Other Accounts&amp;quot;; still unable to login with that first user name and password verified.  Every other subsequent user account activated yields a successful login attempt via GUI.  Interested to learn more.  Thank you.&lt;/p&gt;&#xA;" OwnerUserId="24323" LastEditorUserId="24323" LastEditDate="2020-11-06T04:57:25.987" LastActivityDate="2020-11-06T04:57:25.987" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25919" PostTypeId="2" ParentId="25915" CreationDate="2020-11-06T10:39:49.077" Score="5" Body="&lt;p&gt;The following steps helped me, if I'm not mistaken: removing all languages, adding English (US) and a second language.&lt;/p&gt;&#xA;" OwnerUserId="24325" LastActivityDate="2020-11-06T10:39:49.077" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25920" PostTypeId="1" AcceptedAnswerId="25922" CreationDate="2020-11-06T13:08:14.927" Score="2" ViewCount="100" Body="&lt;p&gt;I'm installing Elementary OS on  my laptop, I' used a USB with de iOS (I made it with RUFUS on Windows), however it is taking a lot of time. It began last night and it doesn't finish, it takes about 8 h.&lt;/p&gt;&#xA;&lt;p&gt;It appears this on the screen:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CSdXz.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CSdXz.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't know if that is normal, I previus installed Oracle Linux, and the last last time it had Ubuntu Budgie and It didn't take too much time.&lt;/p&gt;&#xA;&lt;p&gt;I appreciate any help.&lt;/p&gt;&#xA;&lt;p&gt;Ty&lt;/p&gt;&#xA;" OwnerUserId="24327" LastActivityDate="2020-11-06T20:32:43.033" Title="Installing Elementary OS" Tags="|system-installation|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25922" PostTypeId="2" ParentId="25920" CreationDate="2020-11-06T20:32:43.033" Score="1" Body="&lt;p&gt;In this particular case, the download was corrupted. Errors can happen during the download process and the larger the file is the more chances it has to be corrupted. This can happen during the download itself or as the file is being written to the drive.&lt;/p&gt;&#xA;&lt;p&gt;To resolve this, you need to verify your download. The directions to do so are located on the &lt;a href=&quot;https://elementary.io/pl/docs/installation#choose-operating-system&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary OS Installation&lt;/a&gt; page. This will vary depending on your operating system - and the checksum will change as the distro changes. So, be sure to check there and ensure your downloaded ISO is in fact bit-for-bit correct.&lt;/p&gt;&#xA;&lt;p&gt;If you want to have your download automatically verified, you can actually use a &lt;a href=&quot;https://en.wikipedia.org/wiki/Comparison_of_BitTorrent_clients&quot; rel=&quot;nofollow noreferrer&quot;&gt;Torrent client&lt;/a&gt; to download the ISO. You do this by clicking on the &lt;a href=&quot;https://en.wikipedia.org/wiki/Magnet_URI_scheme&quot; rel=&quot;nofollow noreferrer&quot;&gt;magnet&lt;/a&gt; link in the download window.&lt;/p&gt;&#xA;&lt;p&gt;For visual reference, this is what it currently looks like:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iRQWO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iRQWO.png&quot; alt=&quot;use magnet download to automatically verify the file's correctness&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Files downloaded with a torrent client (using the magnet link) will automatically verify the integrity. The added bonus is that you can keep your torrent client open and help the project by saving the download site(s) some bandwidth.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-11-06T20:32:43.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25923" PostTypeId="1" CreationDate="2020-11-06T21:03:14.817" Score="1" ViewCount="29" Body="&lt;p&gt;I'm testing one of the early access/preview eOS 6 downloads for the first time -- wondering if there is a specific venue to provide feedback from a general user perspective and to ask specific questions?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="24320" LastActivityDate="2020-11-06T21:18:36.887" Title="Location for User Feedback on eOS 6" Tags="|kernel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25924" PostTypeId="2" ParentId="25923" CreationDate="2020-11-06T21:18:36.887" Score="1" Body="&lt;p&gt;I felt that this needed a canonical answer, so I decided to go get the information and share it.&lt;/p&gt;&#xA;&lt;p&gt;First, let me share an image:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vy5Jx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vy5Jx.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;As you can see, the GitHub link is &lt;a href=&quot;http://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. You can report or comment there, though you'll need an account to do so.&lt;/p&gt;&#xA;&lt;p&gt;If it's a problem, like a bug, then you can file it this way:&lt;/p&gt;&#xA;&lt;p&gt;Click on Settings → About → Report a Problem and fill in the information.&lt;/p&gt;&#xA;&lt;p&gt;Further, if you'd like, you can also visit their Slack chat &lt;a href=&quot;https://community-slack.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-11-06T21:18:36.887" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25926" PostTypeId="2" ParentId="21843" CreationDate="2020-11-07T15:54:10.160" Score="0" Body="&lt;p&gt;This can be changed using Elementary Tweaks.In &amp;quot;Tweaks&amp;quot;,click &amp;quot;Files&amp;quot; and turn off the option &amp;quot;Restore Tabs&amp;quot;.&#xA;Hope It Helps ;)&lt;/p&gt;&#xA;&lt;p&gt;For Visual Reference:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/aFBly.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aFBly.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23394" LastEditorUserId="23394" LastEditDate="2020-11-07T15:59:36.730" LastActivityDate="2020-11-07T15:59:36.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25928" PostTypeId="1" CreationDate="2020-11-08T18:28:12.257" Score="0" ViewCount="1013" Body="&lt;p&gt;I have come to the realization that linux is not good for gaming, and i'd like a double boot. How can I access the UEFI/BIOS to download windows then make a dual boot?&lt;/p&gt;&#xA;" OwnerUserId="24337" LastEditorUserId="24337" LastEditDate="2020-11-08T18:41:38.800" LastActivityDate="2021-12-04T09:02:25.257" Title="how do i open UEFI/BIOS through elementary OS?" Tags="|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25929" PostTypeId="1" AcceptedAnswerId="26170" CreationDate="2020-11-08T19:41:34.727" Score="2" ViewCount="1075" Body="&lt;p&gt;Wifi was working fine since I installed it, the LAN ethenret had a problem, but I solved that by installing a realtek 8125 driver, that worked fine too after that.&lt;/p&gt;&#xA;&lt;p&gt;But for some reason, after so many days, the wifi stopped working today. Bluetooth works fine. Wifi doesn't. I booted windows to check if it was my motherboard or router's fault. It works in windows seamlessly. But in elementary I don't see wireless option anymore, only wired option in network settings and the top bar.&lt;/p&gt;&#xA;&lt;p&gt;I tried following a few things on stack exchage sites, for example &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17771/no-wireless-network-after-installation-of-elementary-os-juno&quot;&gt;No wireless network after installation of elementary OS Juno&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But no luck, I went to the BIOS and changed it from CMS or something, to UEFI and Boot Unsecured. And I reinstalled &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; multiple times without luck. Even installed a package called &lt;code&gt;backport-iwlwifi-dkms&lt;/code&gt; because it said so some where on the internet, still no luck. I have no idea how to debug this either.&lt;/p&gt;&#xA;&lt;p&gt;When I run &lt;code&gt;lshw -C network&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  *-network                 &#xA;       description: Ethernet interface&#xA;       product: Realtek Semiconductor Co., Ltd.&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:26:00.0&#xA;       logical name: enp38s0&#xA;       version: 04&#xA;       serial: 2c:f0:5d:70:34:1e&#xA;       size: 100Mbit/s&#xA;       capacity: 1Gbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8125 driverversion=9.003.05-NAPI duplex=full ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s&#xA;       resources: irq:64 ioport:f000(size=256) memory:f7700000-f770ffff memory:f7710000-f7713fff&#xA;  *-network&#xA;       description: Network controller&#xA;       product: Intel Corporation&#xA;       vendor: Intel Corporation&#xA;       physical id: 0&#xA;       bus info: pci@0000:28:00.0&#xA;       version: 1a&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: bus_master cap_list&#xA;       configuration: driver=iwlwifi latency=0&#xA;       resources: irq:40 memory:f7600000-f7603fff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;dmesg&lt;/code&gt; has as list of these errors:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    4.324474] iwlwifi-stack-public:master:8794:f51dd362&#xA;[    4.635086] iwlwifi 0000:28:00.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    4.636043] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-60.ucode failed with error -2&#xA;[    4.636052] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-59.ucode failed with error -2&#xA;[    4.636061] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-58.ucode failed with error -2&#xA;[    4.636069] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-57.ucode failed with error -2&#xA;[    4.636076] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-56.ucode failed with error -2&#xA;[    4.636083] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-55.ucode failed with error -2&#xA;[    4.636090] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-54.ucode failed with error -2&#xA;[    4.636098] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-53.ucode failed with error -2&#xA;[    4.636105] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-52.ucode failed with error -2&#xA;[    4.636111] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-51.ucode failed with error -2&#xA;[    4.636118] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2&#xA;[    4.636125] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;lspci -nnk | grep 0280 -A3&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;28:00.0 Network controller [0280]: Intel Corporation Device [8086:2723] (rev 1a)&#xA;    Subsystem: Intel Corporation Device [8086:0084]&#xA;    Kernel driver in use: iwlwifi&#xA;    Kernel modules: wl, iwlwifi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&lt;p&gt;Upon one answer's suggestion, I ran &lt;code&gt;sudo apt install linux-oem-osp1&lt;/code&gt;, but still no luck. The &lt;code&gt;dmesg | grep iwl&lt;/code&gt; output is as follows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    4.276430] Loading modules backported from iwlwifi&#xA;[    4.276432] iwlwifi-stack-public:master:8794:f51dd362&#xA;[    4.302977] iwlwifi 0000:28:00.0: enabling device (0000 -&amp;gt; 0002)&#xA;[    4.303834] iwlwifi 0000:28:00.0: Direct firmware load for iwlwifi-cc-a0-60.ucode failed with error -2&#xA;[    4.306339] iwlwifi 0000:28:00.0: api flags index 2 larger than supported by driver&#xA;[    4.306347] iwlwifi 0000:28:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 89.3.35.22&#xA;[    4.306578] iwlwifi 0000:28:00.0: loaded firmware version 59.601f3a66.0 cc-a0-59.ucode op_mode iwlmvm&#xA;[    4.519949] iwlwifi 0000:28:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz, REV=0x340&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;18/12/20202 EDIT: After a few days wifi automatically started debugging, I don't know what changed, or what update did it. I stopped installing all updates after this. Auto updates are off too. After a week or so, boom, gone again, no update installed from my side, even then.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iqd6X.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iqd6X.png&quot; alt=&quot;Plus I checked additional software section, it says device is not working, not sure what it means&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Plus I checked additional software section, it says device is not working, not sure what it means&lt;/p&gt;&#xA;" OwnerUserId="24120" LastEditorUserId="24120" LastEditDate="2020-12-18T06:04:09.930" LastActivityDate="2020-12-18T06:30:07.157" Title="Wifi not working in elementary os elementary OS 5.1.7 Hera" Tags="|release-hera|wifi|networking|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25930" PostTypeId="1" CreationDate="2020-11-08T20:12:46.733" Score="0" ViewCount="448" Body="&lt;p&gt;I cannot update 5 packages because I get:&lt;/p&gt;&#xA;&lt;p&gt;E: Failed to fetch &lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&lt;/a&gt;  404  Not Found [IP: 91.189.91.38 80]&lt;/p&gt;&#xA;&lt;p&gt;Any clue?&lt;/p&gt;&#xA;&lt;p&gt;The whole sequence:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1) When I enter sudo apt-get update:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Hit:1 &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/stable/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu&lt;/a&gt; bionic&#xA;InRelease Hit:2 &lt;a href=&quot;http://es.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://es.archive.ubuntu.com/ubuntu&lt;/a&gt; bionic InRelease&lt;br /&gt;&#xA;Hit:3 &lt;a href=&quot;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/elementary-os/os-patches/ubuntu&lt;/a&gt; bionic&#xA;InRelease&lt;br /&gt;&#xA;Hit:4 &lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-security InRelease&lt;br /&gt;&#xA;Hit:5 &lt;a href=&quot;http://packages.elementary.io/appcenter&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://packages.elementary.io/appcenter&lt;/a&gt; bionic InRelease&lt;br /&gt;&#xA;Hit:6 &lt;a href=&quot;http://es.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://es.archive.ubuntu.com/ubuntu&lt;/a&gt; bionic-updates InRelease&#xA;Hit:7 &lt;a href=&quot;http://dl.google.com/linux/chrome/deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://dl.google.com/linux/chrome/deb&lt;/a&gt; stable InRelease&lt;br /&gt;&#xA;Hit:8 &lt;a href=&quot;http://es.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://es.archive.ubuntu.com/ubuntu&lt;/a&gt; bionic-backports InRelease&#xA;Reading package lists... Done&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Then I enter sudo apt-get upgrade:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Reading package lists... Done Building dependency tree        Reading&#xA;state information... Done Calculating upgrade... Done The following&#xA;packages have been kept back:   initramfs-tools initramfs-tools-bin&#xA;initramfs-tools-core linux-generic-hwe-18.04&#xA;linux-headers-generic-hwe-18.04 linux-image-generic-hwe-18.04 The&#xA;following packages will be upgraded:   chromium-codecs-ffmpeg-extra 1&#xA;upgraded, 0 newly installed, 0 to remove and 6 not upgraded. Need to&#xA;get 1.117 kB of archives. After this operation, 5.120 B of additional&#xA;disk space will be used. Do you want to continue? [Y/n]  Ign:1&#xA;&lt;a href=&quot;http://es.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://es.archive.ubuntu.com/ubuntu&lt;/a&gt; bionic-updates/universe amd64&#xA;chromium-codecs-ffmpeg-extra amd64 85.0.4183.121-0ubuntu0.18.04.1&#xA;Err:1 &lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-updates/universe amd64&#xA;chromium-codecs-ffmpeg-extra amd64 85.0.4183.121-0ubuntu0.18.04.1&lt;br /&gt;&#xA;404  Not Found [IP: 91.189.91.38 80] E: Failed to fetch&#xA;&lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&lt;/a&gt;&#xA;404  Not Found [IP: 91.189.91.38 80] E: Unable to fetch some archives,&#xA;maybe run apt-get update or try with --fix-missing?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;So I try sudo apt-get upgrade --fix-missing&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Reading package lists... Done Building dependency tree        Reading&#xA;state information... Done Calculating upgrade... Done The following&#xA;packages have been kept back:   initramfs-tools initramfs-tools-bin&#xA;initramfs-tools-core linux-generic-hwe-18.04&#xA;linux-headers-generic-hwe-18.04 linux-image-generic-hwe-18.04 The&#xA;following packages will be upgraded:   chromium-codecs-ffmpeg-extra 1&#xA;upgraded, 0 newly installed, 0 to remove and 6 not upgraded. Need to&#xA;get 1.117 kB of archives. After this operation, 5.120 B of additional&#xA;disk space will be used. Do you want to continue? [Y/n]  Ign:1&#xA;&lt;a href=&quot;http://es.archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://es.archive.ubuntu.com/ubuntu&lt;/a&gt; bionic-updates/universe amd64&#xA;chromium-codecs-ffmpeg-extra amd64 85.0.4183.121-0ubuntu0.18.04.1&#xA;Err:1 &lt;a href=&quot;http://security.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu&lt;/a&gt; bionic-updates/universe amd64&#xA;chromium-codecs-ffmpeg-extra amd64 85.0.4183.121-0ubuntu0.18.04.1&lt;br /&gt;&#xA;404  Not Found [IP: 91.189.91.38 80] E: Failed to fetch&#xA;&lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_85.0.4183.121-0ubuntu0.18.04.1_amd64.deb&lt;/a&gt;&#xA;404  Not Found [IP: 91.189.91.38 80]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Since the deb is not there, I manually downloaded and installed the newest version:&#xA;&lt;a href=&quot;http://archive.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_86.0.4240.75-0ubuntu0.18.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://archive.ubuntu.com/ubuntu/pool/universe/c/chromium-browser/chromium-codecs-ffmpeg-extra_86.0.4240.75-0ubuntu0.18.04.1_amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I had a warning telling me that a prvious version in the respository was a better idea because supported blah blah&lt;/p&gt;&#xA;&lt;p&gt;I let Appcenter upgrade, and some were upgraded (GIMP fors instance) and other don't.&lt;/p&gt;&#xA;&lt;p&gt;Now when I run sudo update &amp;amp; upgrade in terminal I get:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Reading package lists... Done Building dependency tree        Reading&#xA;state information... Done Calculating upgrade... Done The following&#xA;packages have been kept back:   initramfs-tools initramfs-tools-bin&#xA;initramfs-tools-core linux-generic-hwe-18.04&#xA;linux-headers-generic-hwe-18.04 linux-image-generic-hwe-18.04 0&#xA;upgraded, 0 newly installed, 0 to remove and 6 not upgraded.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So Appcenter tells me to upgrade this packages but then it won't.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Do not try this at home because I don't know exactly what I am doing, but following some ideas I read in other threads, I run sudo apt-get dist-upgrade -y and all pending packages were installed but one. I run it again but no luck:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The following packages have been kept back:   initramfs-tools-bin 0&#xA;upgraded, 0 newly installed, 0 to remove and 1 not upgraded.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;My Wifi stopped working so I booted with the previous kernel version and remove the version I unintentionally upgraded.&lt;/p&gt;&#xA;" OwnerUserId="8010" LastEditorUserId="8010" LastEditDate="2020-11-09T12:52:37.420" LastActivityDate="2024-03-24T00:04:00.497" Title="Cannot update because E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/universe/c/chromium" Tags="|updates|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25934" PostTypeId="2" ParentId="25928" CreationDate="2020-11-09T03:57:32.603" Score="1" Body="&lt;p&gt;There are many ways to get into the systems bios, the simplest way is to reboot the computer then keep pressing the Esc button&lt;/p&gt;&#xA;&lt;p&gt;If that does not work try this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Click the Start button and navigate to settings. &#xA;Select Update &amp;amp; security.&#xA;Select Recovery from the left menu.&#xA;Click Restart Now under Advanced startup. The computer will reboot to a special menu.&#xA;Click Troubleshoot.&#xA;Click Advanced options.&#xA;Select UEFI Firmware Settings&#xA;Click Restart.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Your system will restart and take you to the BIOS.&lt;/p&gt;&#xA;" OwnerUserId="22772" LastActivityDate="2020-11-09T03:57:32.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25936" PostTypeId="2" ParentId="25913" CreationDate="2020-11-09T11:57:07.883" Score="1" Body="&lt;p&gt;It looks like the file permissions on the flatpak folder in your home directory (or possibly your home directory as a whole) are broken. Have you possibly ran a GUI program with &lt;code&gt;sudo&lt;/code&gt; or ran some script that could have caused this?&lt;/p&gt;&#xA;&lt;p&gt;I'd start by resetting the ownership of the flatpak directory. To do this:&lt;/p&gt;&#xA;&lt;p&gt;Run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown -R ryan:ryan /home/ryan/.local/share/flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(Obviously if anyone else is reading this in the future, you'll need to substitute &lt;code&gt;ryan&lt;/code&gt; for your username)&lt;/p&gt;&#xA;&lt;p&gt;This will ensure that the flatpak folder and all of the files/folders within it are &amp;quot;owned&amp;quot; by your user. It's possible that the &lt;code&gt;root&lt;/code&gt; account has taken ownership of them.&lt;/p&gt;&#xA;&lt;p&gt;Then try running AppCenter from the terminal again and see if any of the messages are different.&lt;/p&gt;&#xA;&lt;p&gt;If it still doesn't work you can try running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak repair --user&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(Again trying to restart AppCenter from the terminal afterwards)&lt;/p&gt;&#xA;&lt;p&gt;If it still doesn't work and you don't care about any flatpak applications you have installed (and potentially their settings), then you can remove the flatpak folder with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -r /home/ryan/.local/share/flatpak&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It should get re-created with the correct permissions the next time you install a flatpak application.&lt;/p&gt;&#xA;&lt;p&gt;However, if none of this fixes the issue, you potentially have bigger issues with permissions on files and folders as a whole in your home directory.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-11-09T11:57:07.883" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25937" PostTypeId="2" ParentId="25930" CreationDate="2020-11-09T17:46:07.167" Score="0" Body="&lt;p&gt;Happy ending!&#xA;Two updates later, the Appcenter updated to the newest version of  initramfs-tools-bin. Now Everything is updated.&lt;/p&gt;&#xA;&lt;p&gt;Problem (apparently) solved.&lt;/p&gt;&#xA;" OwnerUserId="8010" LastActivityDate="2020-11-09T17:46:07.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25938" PostTypeId="1" CreationDate="2020-11-09T18:07:56.690" Score="1" ViewCount="43" Body="&lt;p&gt;My Elementary came with JRE 11 by default. After installing IntelliJ I write a code in Java 14 (I like those fancy new Switch statements...) but running my .jar files will end with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Error: LinkageError occurred while loading main class senestudio.Main&#xA;  java.lang.UnsupportedClassVersionError: senestudio/Main has been compiled by a more recent version of the Java Runtime (class file version 58.0), this version of the Java Runtime only recognizes class file versions up to 55.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;message.&lt;/p&gt;&#xA;&lt;p&gt;So, my question is: how do I upgrade my Elementary JRE to version 14 (or higher, if applicable) without breaking anything, as I'm still relatively new to the Linux world.&lt;/p&gt;&#xA;" OwnerUserId="24129" LastActivityDate="2020-11-09T18:07:56.690" Title="Upgrading &quot;default&quot; Java JRE 11" Tags="|java|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25940" PostTypeId="2" ParentId="24363" CreationDate="2020-11-09T19:42:22.060" Score="0" Body="&lt;p&gt;I have a OptiPlex 7050, and I have the same problem.&#xA;I just opened another question about it (I searched a lot and didn't find yours), but I don't want to erase the recovery partition.&lt;/p&gt;&#xA;&lt;p&gt;I created a Ubuntu Install USB and it boots perfectly. ElementaryOS does not.&lt;/p&gt;&#xA;&lt;p&gt;Has anybody found out a solution for this problem ?&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="24343" LastActivityDate="2020-11-09T19:42:22.060" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25941" PostTypeId="1" CreationDate="2020-11-10T05:56:14.723" Score="0" ViewCount="271" Body="&lt;p&gt;First time question here, so Please forgive/guide me if I'm not doing it right, Thanks !&lt;/p&gt;&#xA;&lt;p&gt;I'm testing elementary OS 5.1.7 Hera (fresh install from elementaryos-5.1-stable.20200706.iso, I did NOT tweak the OS/install using stuff in terminal or anything).&#xA;I already had some app updates, including &amp;quot;OS Updates&amp;quot; using AppCenter. All those worked fine and didn't bother me with password stuff and all went smoothly afterwards.&lt;/p&gt;&#xA;&lt;p&gt;I also installed some other apps using AppCenter : Firefox, Fondo, Norka for example and all went nicely and requesting NO password ...&lt;/p&gt;&#xA;&lt;p&gt;Now I'm trying to install a .deb (the DownloadVideoHelper.net &amp;quot;companion app&amp;quot;) and I found out that to install it I could :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;install it from AppCenter : in Files (app), right-click on the .deb file and select &amp;quot;open in AppCenter&amp;quot; : that option wasn't present, so I added it (by selecting what app to use for that extension), and when I then used it, it didn't do anything ... (well, AppCenter starts and then stays there on the &amp;quot;Home&amp;quot; tab [it is not frozen/hung, it just doesn't do anything more than that]) ;&lt;/li&gt;&#xA;&lt;li&gt;install using &amp;quot;sudo apt install ./somefile.deb&amp;quot; : apt requires password, so I'm stuck again.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I searched how to install packages in this os and I found that Synaptic Package Manager would be a great alternative choice, so I tried to install that.&lt;/p&gt;&#xA;&lt;p&gt;Again in AppCenter, searched for synaptic, found it and when I try to install it (by clicking the &amp;quot;Free&amp;quot; button), it wants a password.&#xA;To check anything else, I tried installing &amp;quot;FreetuxTV&amp;quot; (just because that one fell under my gaze). Same thing : stuck for a password.&#xA;But this is non-curated, so I thought this could be the issue here.&#xA;So I tried installing Badger, also Free, but curated. Same problem : I'm stuck again for a password !&lt;/p&gt;&#xA;&lt;p&gt;BTW, I tried hitting [Return] at the password prompt, just in case it would accept that as some default, since I read that elementary OS has in-built the &amp;quot;no-password required&amp;quot; concept to install stuff in order to avoid &amp;quot;authentication-fatigue&amp;quot; as they say ...&lt;/p&gt;&#xA;&lt;p&gt;I believe asking &amp;quot;What is the password / How do I reset the password ?&amp;quot; are thus the wrong questions to ask, since the os developers went for the no-password concept cited above.&lt;/p&gt;&#xA;&lt;p&gt;So you probably already guessed my question :&#xA;How do I install any further apps from the catalog (or not), if I'm going to be blocked by this password issue ?&lt;/p&gt;&#xA;&lt;p&gt;I found and read :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;[https://elementaryos.stackexchange.com/questions/7542/how-can-i-install-deb-files-in-loki] : Eddy might be recommended GUI way, but is NOT Free, so I went for apt &amp;quot;the proper cli way&amp;quot;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;(read all this one but this is the point of interest) [https://elementaryos.stackexchange.com/a/6973]&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;[https://elementaryos.stackexchange.com/questions/22504/appcenter-failed-to-obtain-authentication], and sudo apt update / upgrade both block me with a password request. And yes I did reboot ...&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;not relevant to my situation but read it anyways (BTW, shouldn't this be in elementaryos.stackexchange ? ) [https://stackoverflow.com/questions/61640553/elementary-os-hera-5-1-cant-login-session-returned-error-code-1-accid]&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;just saw this on the sidebar after I posted : [https://elementaryos.stackexchange.com/questions/24754/installing-deb-file-with-a-double-click] : interesting but not relevant to my question, and AppCenter -&amp;gt; Eddy shows $5, so not Free, contrary to one answer reports, and &amp;quot;dpkg (the way that doesn't resolve dependencies)&amp;quot; seems to be the wrong way to doing things as found in [https://elementaryos.stackexchange.com/questions/7542/how-can-i-install-deb-files-in-loki]&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;None of the 25 &amp;quot;Similar questions&amp;quot; (if I counted correctly) proposed when I posted this question were relevant to my question.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance for your help !&lt;/p&gt;&#xA;" OwnerUserId="24344" LastEditorUserId="24344" LastEditDate="2020-11-10T06:23:15.420" LastActivityDate="2020-11-12T15:25:20.420" Title="elementaryOS 5.1.7 Hera AppCenter and apt require password to install anything" Tags="|release-hera|applications|appcenter|security|install|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25942" PostTypeId="2" ParentId="25941" CreationDate="2020-11-10T11:21:20.453" Score="1" Body="&lt;p&gt;There's a lot of content in this &amp;quot;question&amp;quot; so it's hard to fully understand what you're asking. It's often better to ask a succinct question if you want a succint answer, but I'll try and answer some of your points.&lt;/p&gt;&#xA;&lt;p&gt;In summary, if you have forgotten your password, it's not just installing software you're going to struggle with. Changing certain settings will require a password. Unless you've enabled autologon, you'll need your password to log onto the system and unlock it. And if you have enabled autologon, you will be prompted for your password more frequently as a security measure.&lt;/p&gt;&#xA;&lt;p&gt;In case it wasn't clear, the password you are being prompted for is the password you set when you installed elementary OS. This is the same password you log into the system with (unless you have enabled autologon).&lt;/p&gt;&#xA;&lt;p&gt;Now, onto some of your other points:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;in Files (app), right-click on the .deb file and select &amp;quot;open in AppCenter&amp;quot; : that option wasn't present, so I added it&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;This option intentionally doesn't exist since AppCenter does not support installing .deb files. So it's expected that it would do nothing.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;AppCenter : Firefox, Fondo, Norka for example and all went nicely and requesting NO password&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;AppCenter generally prompts for a password for installing new applications. Installing new software onto a computer always carries some small amount of risk, so this acts as a confirmation that you have permission to do this on the computer and have thought about the implications. There are some specific circumstances where AppCenter won't prompt for a password for new installations, these are:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You have already recently given a correct password to AppCenter, it won't prompt again for a period of time.&lt;/li&gt;&#xA;&lt;li&gt;You are installing a Flatpak application (e.g. from &lt;a href=&quot;https://flathub.org/home&quot; rel=&quot;nofollow noreferrer&quot;&gt;flathub.org&lt;/a&gt;). If you have installed an application from there in the past, other applications from Flathub will be available in AppCenter. These applications are considered slightly more secure, and are often only installed for your user account rather than all users on the system, so we don't prompt for a password here.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I read that elementary OS has in-built the &amp;quot;no-password required&amp;quot; concept to install stuff in order to avoid &amp;quot;authentication-fatigue&amp;quot; as they say&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;If you have read that there is no password required to &lt;em&gt;install&lt;/em&gt; software somewhere, please inform the author of that source that this is incorrect. This is correct for &lt;em&gt;updating&lt;/em&gt; software as updating software is usually better than not updating software from a security perspective, but installing new software will always require a password except in the cases mentioned above.&lt;/p&gt;&#xA;&lt;p&gt;So to answer your question of how to install a .deb file, you are correct that you either need an application like Eddy (preferred) or Synaptic, or you can use the command line &lt;code&gt;sudo apt install ./debfile.deb&lt;/code&gt;. However, &lt;strong&gt;all&lt;/strong&gt; of these methods &lt;strong&gt;will&lt;/strong&gt; require a password as installing a .deb file requires administrator permissions.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Eddy shows $5, so not Free, contrary to one answer&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Any applications showing a price in AppCenter follow the elementary &amp;quot;pay what you want&amp;quot; model. The $5 is the price the developer has suggested they feel their application is worth. You can choose to pay any amount for it (including $0) if you wish.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-11-10T11:21:20.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25943" PostTypeId="2" ParentId="25875" CreationDate="2020-11-10T11:38:43.170" Score="0" Body="&lt;p&gt;elementary OS &lt;em&gt;currently&lt;/em&gt; (5.1) uses the Ubuntu Ubiquity installer. So if you have a method of producing automated installs for Ubuntu images, then this should in theory work for elementary OS images too. Though this isn't a use case the development team tests or verifies, so it's possible you may hit snags along the way.&lt;/p&gt;&#xA;&lt;p&gt;However, the currently unreleased elementary OS 6.0 version will use a different installer, so your method probably won't work in future versions.&lt;/p&gt;&#xA;&lt;p&gt;The usual way to do this kind of thing is to install the OS once with the desired settings and then produce a disk image from this that you can deploy to other locations.&lt;/p&gt;&#xA;&lt;p&gt;In theory, if you delete the user you created during installation (so there are no users left), the login screen should guide you through creating a user and doing initial settings. Though I wouldn't recommend testing this on your production system! So it would be possible to create an image of elementary OS in this state to give a fresh &amp;quot;first run&amp;quot; experience.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-11-10T11:38:43.170" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25944" PostTypeId="2" ParentId="2732" CreationDate="2020-11-10T18:55:26.187" Score="0" Body="&lt;p&gt;I'm trying ElementaryOS and this was one of things that called my attention. I'm still have problem finding some configs and have to &amp;quot;hardcode&amp;quot; some.&lt;/p&gt;&#xA;&lt;p&gt;I think that the world is very big and each one has it's own needs. The Elementary OS makers should understand that if an option (like this) is present, there should let the user to choose which behavior is best for him.&lt;/p&gt;&#xA;&lt;p&gt;Please, put more options to the user, and choose your defaults.&lt;/p&gt;&#xA;" OwnerUserId="24343" LastActivityDate="2020-11-10T18:55:26.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25946" PostTypeId="2" ParentId="16830" CreationDate="2020-11-12T03:00:18.863" Score="1" Body="&lt;p&gt;This Reddit thread may help provide some context to the problem:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/archlinux/comments/5pcjsr/what_happened_to_infinality/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://reddit.com/r/archlinux/comments/5pcjsr/what_happened_to_infinality/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24191" LastActivityDate="2020-11-12T03:00:18.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25947" PostTypeId="2" ParentId="25929" CreationDate="2020-11-12T10:00:18.253" Score="1" Body="&lt;p&gt;Based on your &lt;code&gt;lspci&lt;/code&gt; output, I can see that it looks like you have an Intel AX200 WiFi card. Hopefully this will help as an extra search term in your own research. elementary OS 6.0 Juno/Hera is based on Ubuntu 18.04, so search terms like &amp;quot;Ubuntu 18.04 Intel AX200&amp;quot; are likely to turn up relevant results.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;bcmwl-kernel-source&lt;/code&gt; is a driver for Broadcom WiFi cards, not Intel ones, so this isn't relevant to your situation and can be removed/ignored.&lt;/p&gt;&#xA;&lt;p&gt;From my research, it seems like &lt;code&gt;backport-iwlwifi-dkms&lt;/code&gt; should work for your card. But there are a lot of reports about it being flaky for a lot of people. Given your &lt;code&gt;dmesg&lt;/code&gt; messages about firmware issues, it might be worth trying to install the extra Linux firmware bundle first in case that helps.&lt;/p&gt;&#xA;&lt;p&gt;You can do this with the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-firmware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After a reboot, check &lt;code&gt;dmesg&lt;/code&gt; again and see if any of the messages about firmware are different. If after this reboot, WiFi still isn't working, try removing the &lt;code&gt;backport-iwlwifi-dkms&lt;/code&gt; package and rebooting and checking &lt;code&gt;dmesg&lt;/code&gt; again for any differences.&lt;/p&gt;&#xA;&lt;p&gt;Another thing, suggested in &lt;a href=&quot;https://askubuntu.com/a/1169395&quot;&gt;this post&lt;/a&gt; is to try the Ubuntu OEM kernel. Check the currently running kernel version with &lt;code&gt;uname -r&lt;/code&gt;, this should probably be 5.4. You can then install the OEM kernel with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-oem-osp1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After a reboot, running the &lt;code&gt;uname -r&lt;/code&gt; command again should show you're running a different kernel version.&lt;/p&gt;&#xA;&lt;p&gt;If you're still having issues after trying these steps, please update the original post with your &lt;code&gt;dmesg&lt;/code&gt; observations after trying each stage and comment on this post.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2020-11-12T11:14:54.380" LastActivityDate="2020-11-12T11:14:54.380" CommentCount="12" ContentLicense="CC BY-SA 4.0" />
  <row Id="25948" PostTypeId="2" ParentId="25824" CreationDate="2020-11-12T10:04:46.680" Score="0" Body="&lt;p&gt;The problem described may occur when old models of drives are connected to the computer. In my case, after disconnecting, the problem does not occur.&lt;/p&gt;&#xA;" OwnerUserId="24125" LastActivityDate="2020-11-12T10:04:46.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25949" PostTypeId="1" CreationDate="2020-11-12T10:36:54.527" Score="0" ViewCount="310" Body="&lt;p&gt;git clone &lt;a href=&quot;https://github.com/lwfinger/rtw88.git&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtw88.git&lt;/a&gt;&#xA;cd rtw88&#xA;make&#xA;sudo make install&lt;/p&gt;&#xA;&lt;p&gt;its worked finally&lt;/p&gt;&#xA;" OwnerUserId="24308" LastEditorUserId="24308" LastEditDate="2020-11-14T13:51:01.570" LastActivityDate="2020-11-14T13:51:01.570" Title="(Solved) i have problem with Realtek 8822CE Wireless LAN Drivers on Elementary OS (Wifi is disabled all the tiem no drivers working)" Tags="|wifi|drivers|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25950" PostTypeId="1" AcceptedAnswerId="25981" CreationDate="2020-11-12T13:30:24.197" Score="0" ViewCount="103" Body="&lt;p&gt;I have an issue with Files app being duplicated in the Applications menu:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QXCdm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QXCdm.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I also noticed that the app is actually listed 4 times (!) when I try to open some file and I choose &amp;quot;Open with&amp;quot; -&amp;gt; &amp;quot;Other application&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aRSPd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aRSPd.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Why is it happening and how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="24367" LastActivityDate="2020-11-16T08:08:14.590" Title="Files app is duplicated" Tags="|pantheon-files|applications|files|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="25951" PostTypeId="2" ParentId="25950" CreationDate="2020-11-12T15:23:11.187" Score="1" Body="&lt;p&gt;did you install another File manager? (like Nautilus). If it is the case, the others &amp;quot;File&amp;quot; icons are the different file managers installed&lt;/p&gt;&#xA;" OwnerUserId="24369" LastActivityDate="2020-11-12T15:23:11.187" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="25953" PostTypeId="2" ParentId="22756" CreationDate="2020-11-12T22:49:55.747" Score="-1" Body="&lt;p&gt;I couldn't agree more that Elementary/Hera's default font rendering is very much sub-par, especially when compared with Apple devices (most notably iOS), and although it may not seem it, I believe this is actually a major issue for so many users interested in migrating, epecially from OSX. As per the comments above, I believe this is more involved than simply adjusting subpixel rendering settings, and something like fontconfig-infinality may indeed be needed, although it seems that may present significant problems, as it is no longer supported (&lt;a href=&quot;https://reddit.com/r/archlinux/comments/5pcjsr/what_happened_to_infinality/&quot; rel=&quot;nofollow noreferrer&quot;&gt;see the following reddit thread on the topic for more info&lt;/a&gt;). Can this not be integrated into the default distribution of elementary, so as to avoid the need for going to these unbelievaly arduous lengths simply to get some decent font rendering in what is otherwise perhaps the most attractive viable open-source OSX-alternative?&lt;/p&gt;&#xA;" OwnerUserId="24191" LastActivityDate="2020-11-12T22:49:55.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25954" PostTypeId="1" CreationDate="2020-11-12T23:13:30.863" Score="0" ViewCount="152" Body="&lt;p&gt;Estoy usando eoS Hera 5.1.7&lt;/p&gt;&#xA;&lt;p&gt;Tengo instalado el simplescreenrecorder de la store de eos pero el problema es que cuando reproduzco la grabación que realice no se escucha el audio interno del sistema,he probado otras apps que también ofrece eos como screen cast, screen recorder o screenrec y en el caso de estas tres no tengo problema el audio interno se escucha perfecto.&#xA;También intenté instalar el simplescreenrecorder de la tienda de snap-store y tampoco funcionó&#xA;Alguien me podría ayudar por favor  ya que no se porque en el caso de simplescreenrecorder no funciona y en los otros si me gustaría que alguien me pudiera ayudar con este problema.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ij0KM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ij0KM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;a href=&quot;https://i.stack.imgur.com/YvnPa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YvnPa.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24374" LastEditorUserId="24374" LastEditDate="2020-11-12T23:50:34.713" LastActivityDate="2024-02-26T05:06:05.800" Title="Simple screen recorder(ssr) no funciona audio interno" Tags="|appcenter|system|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25955" PostTypeId="1" CreationDate="2020-11-13T07:55:19.417" Score="1" ViewCount="555" Body="&lt;p&gt;I just installed Elementary OS to program mainly because of its editor simplicity. However I don't know how to transform it into an IDE for C++.&lt;/p&gt;&#xA;" OwnerUserId="24378" LastActivityDate="2024-03-01T15:06:00.703" Title="How to compile C++ on Elementary OS code editor?" Tags="|ide|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25956" PostTypeId="1" AcceptedAnswerId="25979" CreationDate="2020-11-13T12:15:23.007" Score="0" ViewCount="339" Body="&lt;p&gt;New Elementary OS Hera (latest stable release as of yesterday) user here but not new to Linux.&lt;/p&gt;&#xA;&lt;p&gt;Every time I attempt to install Elementary OS from having the ISO written to a Live boot USB, I get the grub-efi-amd64-signed package failed to install into /target/ error on my mid-2012 MacBook Pro.&lt;/p&gt;&#xA;&lt;p&gt;I built the Live boot USB using unetbooti I think is the name of it.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I've tried installing by deleting all partitions and letting the installer do that work.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've tried manually partitioning by creating an EFI partition of 500MB, a 4GB swap partition and a remaining / partition.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I've tried installING without an internet connection.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Installing with an internet connection isn't possible. The Mac boot screen allows me to select a wireless connection but it doesn't stay connected once the Elementary OS installer begins. And I don't have the possibility of a wired connection.&lt;/p&gt;&#xA;&lt;p&gt;I can't install from the Live View because of some other error. Can't remember it at this time. But the Live View doesn't allow me to set up a wireless connection anyway.&lt;/p&gt;&#xA;&lt;p&gt;I've spent countless hours on this and have read many solutions that worked for others but not for me. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="24381" LastEditorUserId="15904" LastEditDate="2020-11-22T23:45:29.303" LastActivityDate="2021-01-12T04:20:14.487" Title="grub-efi-amd64-signed package failed to install into /target/ During Installation" Tags="|release-hera|system-installation|grub|uefi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25957" PostTypeId="2" ParentId="25955" CreationDate="2020-11-13T12:58:01.250" Score="0" Body="&lt;p&gt;You can try this: &lt;a href=&quot;https://quickfever.com/how-to-setup-c-plus-plus-development-environment-in-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://quickfever.com/how-to-setup-c-plus-plus-development-environment-in-linux/&lt;/a&gt;. Elementary OS is a derivative of Ubuntu so you may have success with this method.&lt;/p&gt;&#xA;" OwnerUserId="24381" LastActivityDate="2020-11-13T12:58:01.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25958" PostTypeId="1" CreationDate="2020-11-13T13:34:33.223" Score="2" ViewCount="78" Body="&lt;p&gt;I liked the Gnome terminal in Ubuntu but now on Elementary OS I don't find the pantheon terminal as good. I know how to change default terminal. But I want to is it safe ? Will I be able to do all things with the newly installed terminal that I could do with default pantheon terminal ??&lt;/p&gt;&#xA;" OwnerUserId="24383" LastActivityDate="2020-11-13T13:34:33.223" Title="Is changing the default terminal in elementary OS safe?" Tags="|pantheon-terminal|gnome-terminal|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25959" PostTypeId="1" CreationDate="2020-11-13T15:01:54.513" Score="0" ViewCount="70" Body="&lt;p&gt;I would love to switch to elementary OS/ubuntu full time but there are just a few issues holding me back right now.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;My laptop does not go to sleep when I close the lid. The fan just keeps on spinning, and battery drains too, and when I open the lid again it seems that everything just crashes , the  backlight turns on but the screen is black.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Amazon prime/netflix won't load Full HD videos, they're stuck in 480p&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the audio quality from speakers is much, much worse than when in windows. also by default only 2 speakers work but I was able to solve that with the solution provided here.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;My laptop is a HP envy x360 with Ryzen 3500u and I've tried updating to the latest kernel(5.9) with UKUU.&lt;/p&gt;&#xA;&lt;p&gt;Is there any way to solve these issues?&lt;/p&gt;&#xA;" OwnerUserId="24384" LastActivityDate="2024-03-28T07:06:10.787" Title="Laptop does not suspend/sleep" Tags="|suspend|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25960" PostTypeId="1" CreationDate="2020-11-13T20:07:12.900" Score="1" ViewCount="48" Body="&lt;p&gt;I have a Dell Inspiration 15 5555 with Elementary OS Hera which has a base 1Tb HDD, but I wanted upgrade it and recently install a 120Gb SSD using a caddy replacing my DVD/optical drive. Now I want to move my only the OS from the HDD to the SSD but keeping my Documents on the HDD. How can I do it? All the information I can find on the web migrates all the data and my documents are much bigger than 120Gb plus those doesn't need so much read/write speed as the one the SSD offers.&#xA;Already format the SSD using ext4 but I can't find how to move &lt;strong&gt;only&lt;/strong&gt; the OS. If it's need I still have the OS bootable with Hera.&#xA;Been using Elementary OS for 2 years so theoretically I should understand it but to be honest most of the time I have no idea what is going on so please help me.&lt;/p&gt;&#xA;" OwnerUserId="24385" LastEditorUserId="15904" LastEditDate="2020-11-22T23:30:04.630" LastActivityDate="2024-04-06T15:05:20.623" Title="Moving only Elementary Hera OS from a 1Tb HDD to a 120Gb SSD" Tags="|release-hera|ssd|hdd|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25961" PostTypeId="2" ParentId="25960" CreationDate="2020-11-13T21:07:42.100" Score="0" Body="&lt;p&gt;Is it possible to move your documents off to another storage medium temporarily (backup drive or thumb drive), wipe them off your HDD then copy the contents of your now much-smaller HDD  to your new SSD then copy your documents back over to your HDD?&lt;/p&gt;&#xA;" OwnerUserId="24381" LastActivityDate="2020-11-13T21:07:42.100" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25962" PostTypeId="2" ParentId="25959" CreationDate="2020-11-13T21:26:16.450" Score="0" Body="&lt;p&gt;If you set the power button function in the OS to sleep when pressed, does it sleep?&lt;/p&gt;&#xA;&lt;p&gt;Trying to determine if this is an OS or laptop problem.&lt;/p&gt;&#xA;" OwnerUserId="24381" LastActivityDate="2020-11-13T21:26:16.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25963" PostTypeId="1" CreationDate="2020-11-13T21:46:10.877" Score="1" ViewCount="15" Body="&lt;p&gt;Issue: USB and CDROM both fail with validation error for EOS5.1 Stable&lt;/p&gt;&#xA;&lt;p&gt;Have downloaded iso file and tried as per your instructions.&#xA;SHA value is correct&#xA;Used UNetbootin &amp;amp; UUBytesISOEditor to create boot USB. Both show same issue on boot. Security Violation Error and ends with a blue sceen. Not BSOD&#xA;I formatted the USB before each attempt. Space is not an issue. Formatted both ExFAT and FAT32&#xA;Also burnt Ubuntu iso file same way on same USB (clean each time) - That works.&#xA;Did notice that the USB burn seems to hang for quite a while on filesystem.squashfs write to the USB&lt;/p&gt;&#xA;&lt;p&gt;Appreciate any help. install Ubuntu but when try to install clean ElementaryOS - it fails on USB iinstall boot&lt;/p&gt;&#xA;&lt;p&gt;PS Cannot include Violation in the Tags below. So including it here&lt;/p&gt;&#xA;" OwnerUserId="24388" LastActivityDate="2020-11-13T21:46:10.877" Title="Issue installing ElementaryOS 5.1 Stable on Satellite Pro R40-c" Tags="|ubuntu|install|error|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25964" PostTypeId="1" CreationDate="2020-11-14T06:58:42.573" Score="0" ViewCount="122" Body="&lt;p&gt;In which folder does Code store the unsaved text files?&#xA;I have not clicked the save button and the file name is New Document.&#xA;Where is it stored?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wKcJb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wKcJb.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24389" LastActivityDate="2020-11-15T11:11:05.163" Title="In which folder does Code store the unsaved text files?" Tags="|code|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25966" PostTypeId="2" ParentId="25309" CreationDate="2020-11-14T11:12:08.187" Score="2" Body="&lt;p&gt;You need to install &lt;code&gt;xl2tpd&lt;/code&gt; package. Here are the commands I use on Elementary OS Hera:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository ppa:nm-l2tp/network-manager-l2tp&#xA;sudo apt update&#xA;sudo apt install xl2tpd network-manager-l2tp network-manager-l2tp-gnome&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After that you can add new VPN from Network settings. And now you can see new L2TP on dropdown menu.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/peCy5.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/peCy5.jpg&quot; alt=&quot;Elementary OS Network Settings - Add L2TP VPN&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24391" LastEditorUserId="24391" LastEditDate="2020-11-14T12:10:40.157" LastActivityDate="2020-11-14T12:10:40.157" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25968" PostTypeId="2" ParentId="25765" CreationDate="2020-11-14T17:40:18.970" Score="1" Body="&lt;p&gt;This is still happening as of November 14 with Firefox 82.0.3. There's a &lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1666839&quot; rel=&quot;nofollow noreferrer&quot;&gt;mozilla thread&lt;/a&gt; about it that indicates that it's an elementary-OS-specific issue and that it's a regression. They've been kicking the can down the road by marking the problem as &amp;quot;wontfix&amp;quot; for each successive Firefox version rather than addressing it. If this is specifically an elementary OS problem, can the underlying cause be fixed in the OS?&lt;/p&gt;&#xA;" OwnerUserId="22720" LastActivityDate="2020-11-14T17:40:18.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25969" PostTypeId="1" CreationDate="2020-11-14T18:36:48.403" Score="0" ViewCount="32" Body="&lt;p&gt;the other day, my keyboard and mouse stopped working after an update at restart&#xA;So I ran this command &lt;code&gt;sudo apt-get install xserver-xorg-input-all&lt;/code&gt;&#xA;And now, I wanted to add a keyboard shortcut and realised that I don't have the keyboard section in my system settings anymore.&lt;/p&gt;&#xA;&lt;p&gt;I don't know what I should do so I'm asking for your help =)&lt;/p&gt;&#xA;&lt;p&gt;Thanks for reading.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QKDTr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QKDTr.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24394" LastActivityDate="2020-11-14T18:51:44.223" Title="Don't have keyboard section in system settings anymore" Tags="|settings|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25970" PostTypeId="2" ParentId="25969" CreationDate="2020-11-14T18:51:44.223" Score="1" Body="&lt;p&gt;Found a solution.&#xA;I went to the AppCenter and I could download the Keyboard extension system Settings &lt;a href=&quot;https://i.stack.imgur.com/qx8ka.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qx8ka.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24394" LastActivityDate="2020-11-14T18:51:44.223" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25971" PostTypeId="1" CreationDate="2020-11-14T21:03:27.973" Score="1" ViewCount="166" Body="&lt;p&gt;I try to install Elementary OS on my iMac Pro but i cannot get it to work. I have disabled secure boot and enabled external boot in the Startup Security Utility of the iMac. I put the stick in, boot from it from the boot menu and i get the splash screen of Elementary. I push Enter, i see the iMac tries to read the usb stick and then it stops. I get a black screen and the led of the stick has been off.&lt;/p&gt;&#xA;&lt;p&gt;So i thought maybe the usb stick if faulty, so i tried another one, but same issue. So i tried Ubuntu 20 on a stick, i get the splash screen also, but after pushing Enter i get the same problem. The led flickers for a few seconds and then everything stops and i get a black screen.&lt;/p&gt;&#xA;&lt;p&gt;i tried the -nomodeset but nothing works.&lt;/p&gt;&#xA;&lt;p&gt;So it seems there is no way to install Linux on the iMac Pro. Maybe i can add something to grub, but at this point i don't know what to add.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone has an idea how i can fix this?&lt;/p&gt;&#xA;" OwnerUserId="24395" LastEditorUserId="15904" LastEditDate="2020-11-22T23:29:41.563" LastActivityDate="2020-11-26T06:36:34.203" Title="Installing Elementary on an iMac Pro" Tags="|macintosh|secure-boot|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="25973" PostTypeId="2" ParentId="25964" CreationDate="2020-11-15T08:07:26.460" Score="0" Body="&lt;p&gt;As far as I know in the same directory you made text in as a hidden file.&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2020-11-15T08:07:26.460" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25975" PostTypeId="2" ParentId="25964" CreationDate="2020-11-15T11:11:05.163" Score="1" Body="&lt;p&gt;Documents that have &lt;strong&gt;never&lt;/strong&gt; been saved are stored in:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~/.local/share/io.elementary.code/unsaved/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-11-15T11:11:05.163" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25979" PostTypeId="2" ParentId="25956" CreationDate="2020-11-15T15:24:04.427" Score="0" Body="&lt;p&gt;I never did find a way to install successfully without internet. But I enjoy Elementary OS so much that I found a workaround. Hint: you're going to need internet.&lt;/p&gt;&#xA;&lt;p&gt;I had another PC with both wireless and ethernet capabilities. I shared its wireless connection via its ethernet port to the laptop I wanted to install Elementary OS on. Ran the installer and it completed successfully.&lt;/p&gt;&#xA;" OwnerUserId="24381" LastActivityDate="2020-11-15T15:24:04.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25980" PostTypeId="1" AcceptedAnswerId="25986" CreationDate="2020-11-15T21:49:07.923" Score="0" ViewCount="302" Body="&lt;p&gt;I've been using Epiphany for a couple of days, but have encountered a problem with Google Voice that I think Firefox would &amp;quot;solve.&amp;quot; Instead of downloading on my own, I dutifully used the AppCenter, so that elementary would &amp;quot;know&amp;quot; that I have installed the app.&#xA;Now Mozilla Firefox is on my list of installed applications but I cannot open it via AppCenter, and cannot locate it via Files. (Searched for &amp;quot;Mozilla&amp;quot; &amp;quot;Firefox&amp;quot; and &amp;quot;.tar&amp;quot;)&lt;/p&gt;&#xA;&lt;p&gt;I feel like I've &amp;quot;played by the rules,&amp;quot; and that didn't work. I'd love suggestions for elementary actions that could move me forward (and perhaps teach me something about elementary). Should I uninstall, and then reinstall Firefox through AppCenter, and why would that work when it didn't initially?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I'm embarrassed to write that I solved my problem, and didn't document it. My guess, though, is that I went back to the Applications drop down, and saw Firefox &amp;quot;all of a sudden.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Thank you - I appreciate both answers I received, and (as I explained) didn't want to immediately go to Terminal and start using the power of the command line, so as to give elementaryOS a chance to stay well-integrated.&lt;/p&gt;&#xA;" OwnerUserId="24404" LastEditorUserId="26" LastEditDate="2020-11-22T23:37:57.640" LastActivityDate="2020-11-22T23:37:57.640" Title="Used AppCenter to download Mozilla Firefox, but Files shows no .tar or download" Tags="|pantheon-files|appcenter|firefox|" AnswerCount="2" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25981" PostTypeId="2" ParentId="25950" CreationDate="2020-11-16T08:08:14.590" Score="0" Body="&lt;p&gt;There were 2 things that I did to solve this issue.&#xA;First, thanks to @KGIII I removed Applications menu entries using App Editor. I found out that the &amp;quot;duplicats&amp;quot; were actually Nautilus file manager, and not the Pantheon Files.&#xA;Then I just removed Nautilus from my system using &lt;code&gt;apt purge nautilus&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now, I do not have any &amp;quot;duplicates&amp;quot; in both the Applications menu and the &amp;quot;Open with&amp;quot; menu.&lt;/p&gt;&#xA;&lt;p&gt;The only thing that I would like to learn is how Nautilus was installed on my system. I did not install it explicitly by myself, I think it had to come in as a dependency of some other package. However, am I able to know for sure how it got installed?&lt;/p&gt;&#xA;" OwnerUserId="24367" LastActivityDate="2020-11-16T08:08:14.590" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25982" PostTypeId="1" CreationDate="2020-11-16T11:11:22.630" Score="0" ViewCount="196" Body="&lt;p&gt;Elementary contains the defualt app &amp;quot;Screenshot&amp;quot;, which allows to take screenshots of apps' windows.&#xA;When I take a screenshot of say Files app, it looks like that:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BUoWp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BUoWp.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;However, a screenshot of Postman app looks like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/NFTxX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/NFTxX.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;In reality, the app looks as below:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SbSJD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SbSJD.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Why there is no window frame nor shadow around?&#xA;Unfortunatly, I do not recall how I installed this app. I think I did it via Flathub store.&lt;/p&gt;&#xA;" OwnerUserId="24367" LastActivityDate="2020-11-16T11:11:22.630" Title="Screenshot of Postman does not contain a window frame nor shadow" Tags="|applications|apps|screenshot|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="25983" PostTypeId="1" CreationDate="2020-11-16T11:54:47.257" Score="1" ViewCount="279" Body="&lt;p&gt;I'm running Elementary OS for some years now (since Freya) as my main OS and currently I'm on Hera (with the latest updates).&#xA;Recently I decided to switch some applications that I was installing from custom or 3rd party PPAs to their Flatpak counterpart since they are more up to date and in many cases they are official releases from the developer teams which I trust more.&lt;/p&gt;&#xA;&lt;p&gt;I'm using the &amp;quot;Tweaks&amp;quot; add-on and I have set there the &amp;quot;Prefer dark variant&amp;quot; setting to true. It works great so far as any application that supports a dark theme or mode will use that by default (ie: Firefox, Files, Mail, Remmina, etc).&lt;/p&gt;&#xA;&lt;p&gt;Now the issue is that for Flatpak applications it doesn't work. For example Remmina will use the light theme.&#xA;I tried the same apps installed through Snap instead of Flatpak and they do honor the &amp;quot;Prefer dark variant&amp;quot; setting.&lt;/p&gt;&#xA;&lt;p&gt;I checked within Flatpak (flatpak list) and I found that elementary stylesheet is installed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Name                                             Application ID                                Version            Branch          Installation&#xA;elementary stylesheet                            org.gtk.Gtk3theme.elementary                                     3.22            system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I also try to modify ~/.config/gtk-3.0/settings.ini by adding:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Settings]&#xA;gtk-application-prefer-dark-theme=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But it didn't help either.&lt;/p&gt;&#xA;&lt;p&gt;Now my questions are:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Is this a known limitation of flatpak apps in Hera?&lt;/li&gt;&#xA;&lt;li&gt;Is this caused by &amp;quot;dark theme&amp;quot; information missing from elementary stylesheet in the flatpak package?&lt;/li&gt;&#xA;&lt;li&gt;I'm missing something? Some additional configuration?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="24405" LastActivityDate="2024-01-16T02:02:05.273" Title="Prefer dark variant support for Flatpak sideloaded apps in Hera" Tags="|release-hera|themes|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25984" PostTypeId="1" CreationDate="2020-11-16T12:53:56.920" Score="1" ViewCount="48" Body="&lt;p&gt;I am new to Linux and still learning how to do very simple things. I wanted to make the text on the screen larger, so I went to System Settings/ Display and I clicked on some option I had at the bottom of the window, I do not remember the names of the two options given. The display is bigger now but I cant's see the whole windows, just the top part  and I can't go back to how it was because the option is at the bottom part of the window and I can't see it on the screen. What can I do?&lt;/p&gt;&#xA;" OwnerUserId="24406" LastActivityDate="2020-11-16T12:53:56.920" Title="Elementary OS Display" Tags="|display|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25985" PostTypeId="2" ParentId="25980" CreationDate="2020-11-16T13:03:37.113" Score="1" Body="&lt;p&gt;You can install via command line with &lt;code&gt;sudo apt install firefox&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24407" LastActivityDate="2020-11-16T13:03:37.113" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25986" PostTypeId="2" ParentId="25980" CreationDate="2020-11-16T14:01:12.170" Score="2" Body="&lt;p&gt;Alternatively you can also simply install it via Flatpak just by clicking on the &amp;quot;Install&amp;quot; button in the Flathub page for Firefox: &lt;a href=&quot;https://flathub.org/apps/details/org.mozilla.firefox&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/org.mozilla.firefox&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This flatpak package is directly maintained by Mozilla.&lt;/p&gt;&#xA;" OwnerUserId="24405" LastActivityDate="2020-11-16T14:01:12.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="25990" PostTypeId="1" CreationDate="2020-11-17T08:18:27.567" Score="3" ViewCount="392" Body="&lt;p&gt;Is there any program available that shows the weather in the systemtray?&#xA;I mean something like Weather (weather@mockturtl) that you have in linux mint?&lt;/p&gt;&#xA;" OwnerUserId="22772" LastActivityDate="2020-11-20T09:38:10.127" Title="Weather in systemtray" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25991" PostTypeId="2" ParentId="25703" CreationDate="2020-11-17T11:37:10.473" Score="1" Body="&lt;p&gt;I was having similar problems and tried installing Thunderbird 68.?.? on a Zorin distribution. This worked with a Gmail account. So, the problem would appear to be an Elementary OS one.&lt;/p&gt;&#xA;" OwnerUserId="24413" LastActivityDate="2020-11-17T11:37:10.473" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25995" PostTypeId="1" CreationDate="2020-11-18T01:25:04.523" Score="0" ViewCount="4047" Body="&lt;p&gt;I finally had Netflix play at higher resolutions with a native elementary OS browser (specifically Firefox). I am using an updated version of the Netflix 1080p add-on in Firefox and it works flawlessly in my computer (&lt;a href=&quot;https://addons.mozilla.org/en-US/firefox/addon/netflix-1080p-firefox/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Netflix 1080p&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;However, I want to see further details of the streaming quality during playback. With Windows (either through their UWP app or browsers), I can easily do this by pressing (Ctrl + Alt + Shift + D) during playback. However, this does not work with any browsers I have in elementary OS. Is there an equivalent combination for Elementary OS for the said shortcut using the Super key?&lt;/p&gt;&#xA;" OwnerUserId="23980" LastActivityDate="2020-11-23T21:10:13.660" Title="How to show the debug window of Netflix in Firefox (Ctrl + Alt + Shift + D)" Tags="|keyboard-shortcuts|firefox|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="25996" PostTypeId="1" CreationDate="2020-11-18T08:01:05.390" Score="1" ViewCount="194" Body="&lt;p&gt;I lost the keyboard layout indicator from the wing panel. I reinstalled the system language settings and keyboard settings, but it didn't help. Any ideas how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="20928" LastActivityDate="2020-11-25T18:27:04.377" Title="Configuring the wing panel" Tags="|wingpanel|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="1" ClosedDate="2020-12-13T03:15:27.630" ContentLicense="CC BY-SA 4.0" />
  <row Id="25997" PostTypeId="1" CreationDate="2020-11-18T08:16:44.043" Score="1" ViewCount="62" Body="&lt;p&gt;i'm running elementary 5.1 on a huawei matebook 13 with Amd drivers. my WiFi cannot find any devices it's only working with wired connection  &lt;a href=&quot;https://i.stack.imgur.com/edt20.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/edt20.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/edt20.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/edt20.png&quot; alt=&quot;those are the drivers&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24420" LastEditorUserId="15904" LastEditDate="2020-11-22T23:29:37.133" LastActivityDate="2023-12-09T18:05:35.727" Title="wifi cannot find any devices" Tags="|release-hera|wifi|networking|amd|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25998" PostTypeId="2" ParentId="25990" CreationDate="2020-11-18T11:06:23.583" Score="2" Body="&lt;p&gt;You can find it here :&#xA;&lt;a href=&quot;https://github.com/atareao/my-weather-indicator&quot; rel=&quot;nofollow noreferrer&quot;&gt;my weather indicator&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23787" LastActivityDate="2020-11-18T11:06:23.583" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="25999" PostTypeId="1" CreationDate="2020-11-18T12:54:26.607" Score="2" ViewCount="307" Body="&lt;p&gt;Unable to update (from AppCenter) &amp;quot;xdg-desktop-portal desktop integration portal for Flatpak and Snap Version: 1.7.2-flatpak1~bionic&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;The words contained within quotes above comprise the description listed under Operating System Updates.&lt;/p&gt;&#xA;&lt;p&gt;As a workaround that prevents the update from appearing in AppCenter, I disabled these deb and deb-src repositories: ppa.launchpad.net/alexlarsson/flatpak/ubuntu/&lt;/p&gt;&#xA;" OwnerUserId="20825" LastEditorUserId="20825" LastEditDate="2020-11-18T19:19:59.870" LastActivityDate="2020-11-24T18:04:32.340" Title="Update Fails in AppCenter" Tags="|updates|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26001" PostTypeId="1" AcceptedAnswerId="26003" CreationDate="2020-11-18T19:40:40.277" Score="0" ViewCount="116" Body="&lt;p&gt;I have an ancient 2008 MacBook Air laptop. I installed Elementary OS on it. Everything works fine, except Wi-Fi. It doesn't work out of the box. I attempted the advice &lt;a href=&quot;https://itsfoss.com/fix-no-wireless-network-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, namely:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove broadcom-sta-dkms bcmwl-kernel-source&#xA;sudo apt install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;but that didn't work.&lt;/p&gt;&#xA;&lt;p&gt;The default &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; driver also doesn't function.&lt;/p&gt;&#xA;&lt;p&gt;Virtually every other distro worked for me by trying either of the two aforementioned solutions. I'm currently connecting with a Wi-Fi USB card.&lt;/p&gt;&#xA;" OwnerDisplayName="user24423" LastActivityDate="2020-11-20T01:14:56.397" Title="Wi-Fi networks available but cannot connect to on 2008 MacBook Air" Tags="|wifi|drivers|macbook|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26002" PostTypeId="1" CreationDate="2020-11-18T20:13:53.160" Score="1" ViewCount="1416" Body="&lt;p&gt;Recently decided to finally take the jump to Linux. Not being tech savvy I’ve tried my best but run into problems. I’ve searched the net high and low, nothing seems exactly like my problem and those which are similar I’m worried about losing data by giving commands I’ve no idea what they are doing.&lt;/p&gt;&#xA;&lt;p&gt;So anyways problem is as follows. I’m using a Windows 7 Dell Inspiron N5110 laptop, I had an old 80GB partition on my HD for Flight Simulator which I wiped, renamed and allocated for Linux.&lt;/p&gt;&#xA;&lt;p&gt;Put Elementary on to a USB drive, installed alongside windows to the 80GB partition. Install worked great, no problems; successfully installed. Said I needed to reboot to complete the install which I did but on restart the laptop started windows as normal.&lt;/p&gt;&#xA;&lt;p&gt;I’ve looked in BIOS and Elementary/Ubuntu/Linux or anything else are not there to chose as a boot option. Just the standard diskette, USB, Network etc.&lt;/p&gt;&#xA;&lt;p&gt;I ran the virtual version of elementary and used a program that was recommended, something partition. It clearly shows the 80GB partition, the files have installed to the destination, nothing looks broken or corrupted amongst the files.&lt;/p&gt;&#xA;&lt;p&gt;It’s win 7 not 8 or beyond so I don’t even think it has a safe boot option but after searching the web it recommended this may be the problem but it isn’t because the option isn’t even there.&lt;/p&gt;&#xA;&lt;p&gt;When I used the partition app in Elementary it did even tell me where the partition was mounted to so I’m convinced it has installed correctly.&lt;/p&gt;&#xA;&lt;p&gt;At a total guess, from someone non tech-savvy; it’s almost as if Elementary has installed but the bootloader app hasn’t or the laptop doesn’t know I want it to boot Elementary OS from that specific partition.&lt;/p&gt;&#xA;&lt;p&gt;Given the fact I can’t afford another HD to back everything up I am terrified of losing my data by doing the wrong thing or giving the wrong command. For example using a Linux code to mount the partition but not mounting the correct partition and wiping a partition I want to keep with a format. Or writing a wrong value and wiping everything.&lt;/p&gt;&#xA;&lt;p&gt;Any help or direction would be greatly appreciated. Many Thanks.&lt;/p&gt;&#xA;" OwnerUserId="24424" LastActivityDate="2023-12-09T11:07:15.847" Title="Elementary won’t boot after successful install" Tags="|install|dell|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26003" PostTypeId="2" ParentId="26001" CreationDate="2020-11-18T21:27:11.790" Score="0" Body="&lt;p&gt;Try adding pio=1 qos=0 on modprobe file by&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo touch /etc/modprobe.d/b43.conf&#xA; echo &amp;quot;options b43 pio=1 qos=0&amp;quot; | sudo tee -a /etc/modprobe.d/b43.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;reboot or reload b43 driver&lt;/p&gt;&#xA;" OwnerUserId="9770" LastEditorUserId="9770" LastEditDate="2020-11-20T01:14:56.397" LastActivityDate="2020-11-20T01:14:56.397" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26006" PostTypeId="1" AcceptedAnswerId="26026" CreationDate="2020-11-19T14:36:40.103" Score="0" ViewCount="244" Body="&lt;p&gt;I recently installed Elementary OS (5.1.7 Hera) on a Dell Latitude 5590 laptop. I have noticed that after inactivity, the machine enters sleep mode and cannot be switched on. In the syslog I see this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    Nov 19 11:45:41 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782741.3126] dhcp4 (wlp2s0): state changed bound -&amp;gt; bound&#xA;Nov 19 11:45:41 Latitude-5590 dbus-daemon[810]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.18' (uid=0 pi&#xA;d=828 comm=&amp;quot;/usr/sbin/NetworkManager --no-daemon &amp;quot; label=&amp;quot;unconfined&amp;quot;)&#xA;Nov 19 11:45:41 Latitude-5590 systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Nov 19 11:45:41 Latitude-5590 dhclient[1493]: bound to 192.168.10.179 -- renewal in 228 seconds.&#xA;Nov 19 11:45:41 Latitude-5590 dbus-daemon[810]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Nov 19 11:45:41 Latitude-5590 systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Nov 19 11:45:41 Latitude-5590 nm-dispatcher: req:1 'dhcp4-change' [wlp2s0]: new request (2 scripts)&#xA;Nov 19 11:45:41 Latitude-5590 nm-dispatcher: req:1 'dhcp4-change' [wlp2s0]: start running ordered scripts...&#xA;Nov 19 11:46:45 Latitude-5590 wpa_supplicant[839]: wlp2s0: WPA: Group rekeying completed with cc:2d:e0:fb:19:ef [GTK=CCMP]&#xA;Nov 19 11:49:29 Latitude-5590 dhclient[1493]: DHCPREQUEST of 192.168.10.179 on wlp2s0 to 192.168.10.1 port 67 (xid=0x3a7c497c)&#xA;Nov 19 11:49:29 Latitude-5590 dhclient[1493]: DHCPACK of 192.168.10.179 from 192.168.10.1&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3638] dhcp4 (wlp2s0):   address 192.168.10.179&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3638] dhcp4 (wlp2s0):   plen 24 (255.255.255.0)&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3638] dhcp4 (wlp2s0):   gateway 192.168.10.1&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3638] dhcp4 (wlp2s0):   lease time 600&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3639] dhcp4 (wlp2s0):   nameserver '8.8.8.8'&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3639] dhcp4 (wlp2s0):   nameserver '9.9.9.9'&#xA;Nov 19 11:49:29 Latitude-5590 NetworkManager[828]: &amp;lt;info&amp;gt;  [1605782969.3639] dhcp4 (wlp2s0): state changed bound -&amp;gt; bound&#xA;Nov 19 11:49:29 Latitude-5590 dbus-daemon[810]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.18' (uid=0 pi&#xA;d=828 comm=&amp;quot;/usr/sbin/NetworkManager --no-daemon &amp;quot; label=&amp;quot;unconfined&amp;quot;)&#xA;Nov 19 11:49:29 Latitude-5590 systemd[1]: Starting Network Manager Script Dispatcher Service...&#xA;Nov 19 11:49:29 Latitude-5590 dhclient[1493]: bound to 192.168.10.179 -- renewal in 281 seconds.&#xA;Nov 19 11:49:29 Latitude-5590 dbus-daemon[810]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'&#xA;Nov 19 11:49:29 Latitude-5590 systemd[1]: Started Network Manager Script Dispatcher Service.&#xA;Nov 19 11:49:29 Latitude-5590 nm-dispatcher: req:1 'dhcp4-change' [wlp2s0]: new request (2 scripts)&#xA;Nov 19 11:49:29 Latitude-5590 nm-dispatcher: req:1 'dhcp4-change' [wlp2s0]: start running ordered scripts...&#xA;Nov 19 11:50:39 Latitude-5590 gsd-power[1749]: Failed to acquire idle monitor proxy: Az időkorlát elérve&#xA;Nov 19 11:50:39 Latitude-5590 gnome-session-binary[1590]: GnomeDesktop-WARNING: Failed to acquire idle monitor proxy: Az időkorlát elérve&#xA;Nov 19 11:50:39 Latitude-5590 gnome-session[1590]: gnome-session-binary[1590]: GnomeDesktop-WARNING: Failed to acquire idle monitor proxy: Az időkorlát elérve&#xA;Nov 19 11:51:45 Latitude-5590 wpa_supplicant[839]: wlp2s0: WPA: Group rekeying completed with cc:2d:e0:fb:19:ef [GTK=CCMP]&#xA;....................................................................................................................................................................................................................&#xA;....................................................................................................................................................................................................................&#xA;....................................................................................................................................................................................................................&#xA;............................................................................................................................................Nov 19 13:12:53 Latitude-5590 systemd-modules-load[491]: Inserted&#xA;module 'lp'&#xA;Nov 19 13:12:53 Latitude-5590 systemd-modules-load[491]: Inserted module 'ppdev'&#xA;Nov 19 13:12:53 Latitude-5590 systemd-modules-load[491]: Inserted module 'parport_pc'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Do you have any idea why this could happen?&lt;/p&gt;&#xA;" OwnerUserId="24430" LastEditorUserId="15904" LastEditDate="2020-11-22T08:41:25.487" LastActivityDate="2020-11-22T16:47:13.267" Title="Does not wake up from suspend mode" Tags="|release-hera|suspend|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26007" PostTypeId="2" ParentId="26002" CreationDate="2020-11-19T16:57:47.213" Score="0" Body="&lt;p&gt;For whatever reason, GRUB isn't working properly. I don't know why. I wasn't there when it was installed. So, we're going to fix it.&lt;/p&gt;&#xA;&lt;p&gt;First, adding PPAs to eOS is a pain. It's possible, but let's just skip that step for the sake of simplicity. So we'll go ahead and download &lt;a href=&quot;https://ubuntu.com/download/desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Once you've done that, you need to &lt;em&gt;write&lt;/em&gt; the ISO to disk. You can write it to USB or DVD. If you're going to use USB, I recommend &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Balena Etcher&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Now, you'll need to boot the live instance of Ubuntu. As you've already installed eOS, you should know how to do this.&lt;/p&gt;&#xA;&lt;p&gt;Once you're into the live instance, it's time to install the boot-repair PPA. Open your terminal with CTRL + ALT + T and:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yannubuntu/boot-repair&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You probably don't need to update, it should do that automatically. If it doesn't, then do so and then run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Let that install and then start it from that same terminal window:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;boot-repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Just go ahead and click the recommended repair and it's almost certainly going to fix this problem. If you have a more complicated problem, or if it doesn't work, then create a summary and share the link when you're asking a &lt;em&gt;new&lt;/em&gt; question on this site or on other sites.&lt;/p&gt;&#xA;&lt;p&gt;As always, backup any important data. And, you don't have to use Ubuntu. You can use any distro that enables you to install boot-repair. We're only using Ubuntu for the sake of expediency.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-11-19T16:57:47.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26008" PostTypeId="2" ParentId="25960" CreationDate="2020-11-19T20:32:06.593" Score="0" Body="&lt;p&gt;So do you mean that you want upgrading to an SSD, but you insist on keeping your current OS? I think you can try to clone your HDD to SSD. maybe this &lt;a href=&quot;https://itsfoss.com/upgrading-solid-state-drive-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;article&lt;/a&gt; is quite helpful&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2020-11-19T20:32:06.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26009" PostTypeId="2" ParentId="25955" CreationDate="2020-11-19T20:39:39.463" Score="0" Body="&lt;p&gt;I think you need to compile via CLI (Terminal), or use an IDE that's integrated with C++. &lt;a href=&quot;https://stackoverflow.com/questions/24109/c-ide-for-linux&quot;&gt;https://stackoverflow.com/questions/24109/c-ide-for-linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2020-11-19T20:39:39.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26012" PostTypeId="1" CreationDate="2020-11-20T04:52:24.323" Score="0" ViewCount="250" Body="&lt;p&gt;Is there any way to add &amp;quot;Hibernate&amp;quot; to the power menu in Hera as in Freya?&#xA;&amp;quot;sudo systemctl hibernate&amp;quot; works perfectly.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastActivityDate="2024-03-19T14:05:30.677" Title="Hibernate Option In Power Menu" Tags="|release-hera|settings|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26013" PostTypeId="1" AcceptedAnswerId="26029" CreationDate="2020-11-20T07:08:22.873" Score="0" ViewCount="213" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ee8ht.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ee8ht.png&quot; alt=&quot;This the error that is displayed&quot; /&gt;&lt;/a&gt;I am learning to make apps for Elementary OS. I wrote my app it compiles well without any errors. But when I try to open the application, it displays a message stating gsettings schema isnt installed.&lt;/p&gt;&#xA;&lt;p&gt;I looked up some other forums and tried out some of the steps. None seems to work.&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastEditorUserId="9445" LastEditDate="2020-11-22T21:04:58.940" LastActivityDate="2020-11-22T21:12:05.677" Title="gsettings schema isnt installed" Tags="|settings|applications|development|gtk|vala|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="26017" PostTypeId="1" AcceptedAnswerId="26021" CreationDate="2020-11-21T10:37:14.423" Score="2" ViewCount="557" Body="&lt;p&gt;So I just got a fresh install of Elementary OS and wanted to get myself Virtual Studio Code which is the editor I used back when I had Windows.&#xA;Googled a how to and did the following (in terminal):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install snapd&#xA;sudo snap install code --classic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;All went well and the terminal said that vscode has been installed, but I cannot find the actual applicattion anywhere in the applications section.&#xA;What can I do?&#xA;Thank you!&lt;/p&gt;&#xA;&lt;p&gt;UPDATE :&#xA;Restarted the pc and the app appeared :/&#xA;Does this always happen with Elementary ?&lt;/p&gt;&#xA;" OwnerUserId="24440" LastEditorUserId="24440" LastEditDate="2020-11-21T10:45:14.860" LastActivityDate="2020-11-21T17:08:30.507" Title="Cannot find VS Code application on Elementary OS" Tags="|software-installation|vscode|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26018" PostTypeId="1" CreationDate="2020-11-21T11:33:32.713" Score="0" ViewCount="43" Body="&lt;p&gt;For some specific reasons I need to run evince from command line as root, this is because certain files on my system as so protected that I can only access them via root.&lt;/p&gt;&#xA;&lt;p&gt;Since by default is not possible to get the file by running the following command logged as root&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;evince filename.pdf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;sometime ago I found the following workround, logged into terminal as root I can open the file with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xhost local:root&#xA;DISPLAY=$DISPLAY  evince  filename.pdf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;what happens now is that the above command still work, but it takes like 1minute to open the file, whereas if do&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo evince filename.pdf &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;it does it immediately.&lt;/p&gt;&#xA;&lt;p&gt;Any explanation?&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2020-11-24T18:29:09.627" Title="running evince from root is so slow" Tags="|sudo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26021" PostTypeId="2" ParentId="26017" CreationDate="2020-11-21T17:08:30.507" Score="1" Body="&lt;p&gt;This is more a snap thing than an eOS thing. In other words, I've seen the same behavior on other operating systems where I'd installed snaps.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/910821/programs-installed-via-snap-not-showing-up-in-launcher&quot;&gt;Here&lt;/a&gt; is a thread with a bunch of people who had issues getting snaps to show. In my experience, it generally appears in the menus after a reboot (or logging off and back in again) - so long as it was shipped with a proper .desktop file.&lt;/p&gt;&#xA;&lt;p&gt;Always? No, probably not always. Frequently? Surely it is, if you plan on installing many snaps. For example, see &lt;a href=&quot;https://askubuntu.com/a/1201081/453950&quot;&gt;this particular comment&lt;/a&gt; from the above linked thread, where they only see their snaps after they logoff and then login again.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-11-21T17:08:30.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26022" PostTypeId="1" CreationDate="2020-11-21T23:04:58.063" Score="1" ViewCount="42" Body="&lt;p&gt;There are some websites I want to play on and I cant play on them because of the add blocker so how do i disable it for a while?&lt;/p&gt;&#xA;" OwnerUserId="24445" LastActivityDate="2020-11-23T00:14:09.410" Title="How to disable the add blocker?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26023" PostTypeId="1" AcceptedAnswerId="26033" CreationDate="2020-11-22T00:16:47.297" Score="0" ViewCount="413" Body="&lt;p&gt;Anyone able to install eOS on Huawei Matebook 14 2020 Ryzen model, I am having a display and wireless issues.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-02-13T19:54:31.167" Title="Installing eOS on Huawei Matebook 14 2020 Ryzen" Tags="|ryzen|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26026" PostTypeId="2" ParentId="26006" CreationDate="2020-11-22T16:47:13.267" Score="0" Body="&lt;p&gt;SOLVED&lt;/p&gt;&#xA;&lt;p&gt;The below solution has worked:&#xA;In /etc/default/grub file change this line:&#xA;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;To this:&lt;/p&gt;&#xA;&lt;p&gt;GRUB_CMDLINE_LINUX=&amp;quot;intel_idle.max_cstate=1 i915.enable_dc=0&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Then apply the settings and reboot the system:&lt;/p&gt;&#xA;&lt;p&gt;sudo update-grub &amp;amp;&amp;amp; reboot&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1241771/dell-latitude-7390-ubuntu-20-04-sometimes-hangs-and-reboot-after-pressing-s&quot;&gt;See the original site below.&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24430" LastActivityDate="2020-11-22T16:47:13.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26027" PostTypeId="2" ParentId="26022" CreationDate="2020-11-22T17:04:11.667" Score="2" Body="&lt;p&gt;To disable ad-blocking in eOS, you need to open the browser, click on the gear icon, and set the preferences to allow ads.&lt;/p&gt;&#xA;&lt;p&gt;However, this isn't the kind of fidelity that you're looking for. In Epiphany, the eOS default browser, ad-blocking is binary, meaning that it is either on or it is off. You can't disable it for individual sites while keeping it enabled for other sites.&lt;/p&gt;&#xA;&lt;p&gt;Your most realistic solution is to install another mainstream browser, such as &lt;a href=&quot;https://www.mozilla.org/en-US/firefox/new/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Firefox&lt;/a&gt; or &lt;a href=&quot;https://www.google.com/chrome/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Chrome&lt;/a&gt;. Then, install an ad-blocking extension - such as uBlock Origin. With that extension, you can visit the site, click on the extension in the browser's notification area, and disable ad-blocking for individual sites.&lt;/p&gt;&#xA;&lt;p&gt;There are other browsers (such as &lt;a href=&quot;https://vivaldi.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vivaldi&lt;/a&gt;, &lt;a href=&quot;https://brave.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Brave&lt;/a&gt;, or &lt;a href=&quot;https://www.opera.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Opera&lt;/a&gt;) that have built-in ad-blocking. In each of those cases, you also have the fidelity to disable blocking on a per-site basis.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastEditorUserId="23800" LastEditDate="2020-11-23T00:14:09.410" LastActivityDate="2020-11-23T00:14:09.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26028" PostTypeId="1" CreationDate="2020-11-22T17:29:10.343" Score="1" ViewCount="351" Body="&lt;p&gt;I have this problem, it started without context once when i was trying to start the OS. I use a ssd external disk and its new, so i dont think that the disk is the problem.Secure boot mode disable. When i try to iniciate the OS the above message appears and entry in the emergency mode, where using the commands that provides is useless, but if before typing exit I write &amp;quot;mount -a&amp;quot; and then &amp;quot;exit&amp;quot;, it works.&#xA;I literally dont understand nothing, I dont know what happened, so pls any answer would be appreciated.&#xA;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="24454" LastActivityDate="2020-11-22T17:29:10.343" Title="integrity problem loading x.509 certificate -65" Tags="|system|secure-boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26029" PostTypeId="2" ParentId="26013" CreationDate="2020-11-22T21:04:21.823" Score="0" Body="&lt;p&gt;Thank you for sharing your code, looks good!&#xA;Took me while to look over it (needed to set up a new elementary OS virtual machine), downloaded your code, built it, and indeed got the same error when trying to install it.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Hn0T7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Hn0T7.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;That error led me to look into your &lt;code&gt;post_install.py&lt;/code&gt; file, and noticed a typo on the first line (read more about &lt;a href=&quot;http://stanford.edu/%7Ejainr/basics.py&quot; rel=&quot;nofollow noreferrer&quot;&gt;shebang&lt;/a&gt;), a space had made its way where no space should be present:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/eDooL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eDooL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After changing it to &lt;code&gt;#!/usr/bin/env python3&lt;/code&gt;, deleting the build folder, and running the build &amp;amp; install commands again, the schema was parsed successfully:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/UMkEI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/UMkEI.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And the app runs as expected:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2CYwL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2CYwL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Vala is a nice programming language, and I wish you great success in your learning process. Never hesitate to ask for help when needed, and help others when you can.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-11-22T21:12:05.677" LastActivityDate="2020-11-22T21:12:05.677" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26032" PostTypeId="1" CreationDate="2020-11-22T23:52:13.927" Score="1" ViewCount="73" Body="&lt;p&gt;I am not sure if this happens with other applications, but I have seen it happen in Zoom. Whenever I am in a call and go into a full screen view, the application goes into full screen mode, but only takes up like 1/4 of the top left of the screen and becomes unresponsive until I move it to a different workspace, where it is no longer in full screen mode.&lt;/p&gt;&#xA;" OwnerUserId="24457" LastActivityDate="2023-12-11T01:07:20.930" Title="Issue with Full Screen in Zoom Call" Tags="|display|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26033" PostTypeId="2" ParentId="26023" CreationDate="2020-11-23T01:01:01.240" Score="1" Body="&lt;p&gt;I was able to fix the problem by upgrading the kernel to 5.7.1-050701, Graphics issue fixed by just upgrading the kernel but had to install the Realtek driver manually for wireless to work. But right now all working fine.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2020-11-23T01:01:01.240" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26035" PostTypeId="2" ParentId="25997" CreationDate="2020-11-23T05:12:54.477" Score="0" Body="&lt;p&gt;What brand name of Wifi card are you using? try to upgrade the kernel with &lt;a href=&quot;http://ubuntuhandbook.org/index.php/2020/08/mainline-install-latest-kernel-ubuntu-linux-mint/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24460" LastActivityDate="2020-11-23T05:12:54.477" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26039" PostTypeId="2" ParentId="26032" CreationDate="2020-11-23T16:39:05.003" Score="0" Body="&lt;p&gt;I believe it is a zoom bug not elementary issue, it happens to all my devices using linux in general and teams or skype does not make the same issue, just enter full screen from elementary itself not from zoom (search shortcuts for full screen).&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2020-11-23T16:39:05.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26041" PostTypeId="2" ParentId="25995" CreationDate="2020-11-23T21:10:13.660" Score="1" Body="&lt;p&gt;Ctrl + Alt + Shift + Q is working fine to me. Firefox 83 and Netflix 1080p extension.&lt;/p&gt;&#xA;" OwnerUserId="24472" LastActivityDate="2020-11-23T21:10:13.660" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26043" PostTypeId="1" CreationDate="2020-11-24T05:10:34.067" Score="0" ViewCount="293" Body="&lt;p&gt;I installed Google Chrome long ago. It works. Today Google won't let me log in using the Linux machine running Elementary but it will let me log on with my Chromebook. I've changed passwords all over the place. Still it won't let me log in because it claims there is malicious software on the machine. Yet it will let me log in with a different Google account. If anybody knows what is going on let me know.&lt;/p&gt;&#xA;&lt;p&gt;Google Chrome is not visible in the Installed Programs page. I want to delete it and reinstall it to see if this fixes the problem. I don't know where to go to uninstall it. Please help.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="23630" LastActivityDate="2020-11-24T18:23:05.623" Title="How Do I Uninstall Google Chrome?" Tags="|google-chrome|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26044" PostTypeId="1" CreationDate="2020-11-24T10:57:59.927" Score="0" ViewCount="143" Body="&lt;p&gt;Friends&#xA;How to upgrade OpenGL from version 2 to version 3.3 or higher.&#xA;thank you for your attention&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xxx~$ glxinfo | grep -i opengl&#xA;OpenGL vendor string: Intel Open Source Technology Center&#xA;OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset (CTG)&#xA;OpenGL version string: 2.1 Mesa 20.3.0-devel (git-2b977ad 2020-10-06 bionic-oibaf-ppa)&#xA;OpenGL shading language version string: 1.20&#xA;OpenGL extensions:&#xA;OpenGL ES profile version string: OpenGL ES 2.0 Mesa 20.3.0-devel (git-2b977ad 2020-10-06 bionic-oibaf-ppa)&#xA;OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16&#xA;OpenGL ES profile extensions:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24478" LastEditorUserId="9445" LastEditDate="2020-11-24T11:39:01.667" LastActivityDate="2020-11-24T11:39:01.667" Title="how to update openGl in elementary os" Tags="|release-hera|updates|settings|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26045" PostTypeId="2" ParentId="25999" CreationDate="2020-11-24T18:04:32.340" Score="3" Body="&lt;p&gt;Remove the &lt;code&gt;http://ppa.launchpad.net/alexlarsson/flatpak/ubuntu&lt;/code&gt; ppa.&lt;/p&gt;&#xA;&lt;p&gt;You might've added it from various guides around the internet when flatpak was released, that's how I got it. It's no longer needed as, since 5.1, elementary supports flatpak out of the box.&lt;/p&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/elementary/os-patches/issues/145&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os-patches/issues/145&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16191" LastActivityDate="2020-11-24T18:04:32.340" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26046" PostTypeId="2" ParentId="26043" CreationDate="2020-11-24T18:23:05.623" Score="1" Body="&lt;p&gt;&lt;code&gt;sudo apt purge google-chrome-stable -y&lt;/code&gt; in the terminal&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-11-24T18:23:05.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26047" PostTypeId="2" ParentId="26018" CreationDate="2020-11-24T18:29:09.627" Score="2" Body="&lt;p&gt;First and foremost, it should not be necessary to elevate the Evince GUI to root, and doing so could be a serious security risk. You should ensure that the files you need to manage have the proper permissions and ownership attributes attached to them. You can look into &lt;code&gt;chmod&lt;/code&gt; to adjust the permissions for the file and &lt;code&gt;chown&lt;/code&gt; to adjust ownership. Setting this properly should ensure you don't need to use &lt;code&gt;sudo evince&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Here's an example, for a file on my system.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;To set the file to the proper permissions, I'd use this:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo chmod 664 /home/schykle/myfile.pdf&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;To change my user to the owner of the file, I'd use this:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo chown schykle /home/schykle/myfile.pdf&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-11-24T18:29:09.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26048" PostTypeId="2" ParentId="24833" CreationDate="2020-11-24T22:22:32.880" Score="0" Body="&lt;p&gt;Just adding a comment here, as this has been an issue that I encountered recently.&lt;/p&gt;&#xA;&lt;p&gt;If the Templates folder is Deleted, and the system is restarted, the config line changes to XDG_TEMPLATES_DIR=&amp;quot;$HOME&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;By setting it to &amp;quot;$HOME/Templates&amp;quot;, then creating a folder called Templates in the Home Directory, then restarting, fixed my issue.&lt;/p&gt;&#xA;" OwnerUserId="24481" LastActivityDate="2020-11-24T22:22:32.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26049" PostTypeId="2" ParentId="1860" CreationDate="2020-11-25T07:04:49.803" Score="-1" Body="&lt;p&gt;Same bug in Elementary OS 5.1 too.&#xA;&lt;code&gt;sudo chmod 744 /usr/lib/gvfs/gvfsd-smb-browse&lt;/code&gt; is a temporary fix. Looks like elementary OS team needs a decade to fix this bug since this issue was reported 5-6 years ago (..)&lt;/p&gt;&#xA;" OwnerUserId="24484" LastEditorUserId="26" LastEditDate="2020-12-13T03:29:25.440" LastActivityDate="2020-12-13T03:29:25.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26051" PostTypeId="2" ParentId="18833" CreationDate="2020-11-25T15:31:19.753" Score="0" Body="&lt;p&gt;I've encountered the same problem and fixed it by specifying a direct calendar endpoint. This does not require the installation of any additional software or settings.&lt;/p&gt;&#xA;&lt;p&gt;The two endpoints automatically generated through the online Nextcloud &lt;code&gt;Settings&lt;/code&gt; function within the Calendar app are in the following format:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;https://example.nextcloud.com/remote.php/dav&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;https://example.nextcloud.com/remote.php/dav/principals/users/USERNAME&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Currently, these do not work with the &lt;code&gt;elementary OS &lt;/code&gt; calendar app.&lt;/p&gt;&#xA;&lt;p&gt;To correctly load your calendars, you must copy the individual &lt;em&gt;private link&lt;/em&gt; generated by opening the drop down menu beside &lt;em&gt;each&lt;/em&gt; calendar and clicking &lt;code&gt;Copy private link&lt;/code&gt;. This will give you the following endpoint format:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;https://example.nextcloud.com/remote.php/dav/calendars/users/USERNAME/CALENDAR/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Tested to be working on&lt;/strong&gt;: &lt;code&gt;elementary OS 5.1.7 Hera&lt;/code&gt; with &lt;code&gt;Nextcloud 19.0.5&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Caveat&lt;/strong&gt;: each calendar has to be added manually&lt;/p&gt;&#xA;" OwnerUserId="20440" LastEditorUserId="20440" LastEditDate="2020-12-30T11:55:36.347" LastActivityDate="2020-12-30T11:55:36.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26052" PostTypeId="2" ParentId="25996" CreationDate="2020-11-25T18:27:04.377" Score="1" Body="&lt;p&gt;I had the same issue and solved it by deleting all languages in keyboard settings, and re-adding them again, as stated in this post:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/25915/problem-with-keyboard-language-indicator&quot;&gt;Problem with keyboard language indicator&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24489" LastActivityDate="2020-11-25T18:27:04.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26053" PostTypeId="1" CreationDate="2020-11-25T20:49:29.233" Score="0" ViewCount="542" Body="&lt;p&gt;I have a old 32bit-UEFI miniPC with ATOM CPU.&lt;/p&gt;&#xA;&lt;p&gt;It has 2GB RAM, 30GB eMMC and 4x1440MHz CPU.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/oizxGhz1DXU&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/oizxGhz1DXU&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/uICWW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uICWW.jpg&quot; alt=&quot;CSL Narrow Box&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.amazon.de/Mini-PC-lautlose-Silent-PC-Bluetooth/dp/B01EYN55JO&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.amazon.de/Mini-PC-lautlose-Silent-PC-Bluetooth/dp/B01EYN55JO&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The white one has a X5-Z8300 Atom that should support 64bit code : &lt;a href=&quot;https://ark.intel.com/content/www/us/en/ark/products/87383/intel-atom-x5-z8300-processor-2m-cache-up-to-1-84-ghz.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ark.intel.com/content/www/us/en/ark/products/87383/intel-atom-x5-z8300-processor-2m-cache-up-to-1-84-ghz.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How can I install elementary OS 6.x Odin with a 32bit-UEFI, and what PERFORMENCE can I expect with 2 GB RAM ?&lt;/p&gt;&#xA;" OwnerUserId="24281" LastEditorUserId="24281" LastEditDate="2020-11-26T13:20:56.763" LastActivityDate="2020-11-26T13:20:56.763" Title="Minimum HARDWARE requirements for ODIN?" Tags="|system-installation|hardware|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26054" PostTypeId="2" ParentId="26053" CreationDate="2020-11-25T21:15:21.277" Score="1" Body="&lt;p&gt;With the first system, you can't install it at all. eOS is a 64 bit OS. Those are limited to the 32 bit architecture. You'll need a 32 bit OS.&lt;/p&gt;&#xA;&lt;p&gt;With the second system, you can install it - but your performance will be pretty poor.&lt;/p&gt;&#xA;&lt;p&gt;These are the &lt;em&gt;minimum&lt;/em&gt; requirements for the &lt;em&gt;current&lt;/em&gt; version of eOS:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;You meet most of the requirements, but you do not meet the minimum RAM requirements. The device you linked only has 2 GB of RAM, or half of the minimum recommended amount. The next version will have &lt;em&gt;at least&lt;/em&gt; the same minimum requirements.&lt;/p&gt;&#xA;&lt;p&gt;It'll probably run, but it won't be very fast. You will be very disappointed with the performance.&lt;/p&gt;&#xA;&lt;p&gt;So, what can you do?&lt;/p&gt;&#xA;&lt;p&gt;For the first systems, you can search &lt;a href=&quot;https://distrowatch.com/search.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;DistroWatch&lt;/a&gt; for 32 bit systems.&lt;/p&gt;&#xA;&lt;p&gt;For the second system, and for the first, you can use &lt;a href=&quot;https://en.wikipedia.org/wiki/Light-weight_Linux_distribution&quot; rel=&quot;nofollow noreferrer&quot;&gt;this handy list&lt;/a&gt; of lightweight Linux distros.&lt;/p&gt;&#xA;&lt;p&gt;Don't fret, however. If you follow those two links, there are many choices for you to pick from. It isn't too hard to find a distro that works well and suits your needs, nor is it all that challenging to make them aesthetically pleasing.&lt;/p&gt;&#xA;&lt;p&gt;They (the Linux community, not eOS) haven't stopped developing for 32 bit, but it has slowed because there are fewer people to test on 32 bit hardware. eOS has made the decision to not support 32 bit computers at all.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-11-25T21:15:21.277" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="26055" PostTypeId="1" CreationDate="2020-11-25T21:21:44.463" Score="0" ViewCount="48" Body="&lt;p&gt;I reinstalled elementary after an episode of black screens. It worked for a couple of days. Then one day it asks me to insert boot device... I ended up reinstalling elementary again. Now after reinstalling I restarted like x2. Third time restart it doesn't let me log in... Session returned error code 1. Help!!!&lt;/p&gt;&#xA;" OwnerUserId="8059" LastActivityDate="2020-11-25T21:21:44.463" Title="Can't log in to elementary" Tags="|greeter|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26057" PostTypeId="2" ParentId="25971" CreationDate="2020-11-26T06:36:34.203" Score="1" Body="&lt;p&gt;As the Mac is quite new I believe it has a T2 security chip (even though it doesn’t have a fingerprint reader which is generally the give away that a T1 or T2 chip is present on MacBooks).&lt;/p&gt;&#xA;&lt;p&gt;The way the T1/2 security chips work is they are basically their own little computers and are the gatekeepers for much of the ancillary (I guess? They aren’t necessarily key ‘core’ components, but you need them to work the machine) go through the chip. Just off the top of my head I know the keyboard/mouse go through them, I believe they can do some hardware decode/encode so would make sense the graphics hardware is intertwined, and I think the SSD may go through it as well.... well, I guess that answers my previous comment: not just ancillary, but key core components interact via it as well.&lt;/p&gt;&#xA;&lt;p&gt;The point is to provide increased security for the system &amp;amp; being an Apple product essential no documentation about how they work/how to interact with them is available. So basically a black box.&#xA;Given that FileVault is unlocked using it it makes sense that to boot a new Mac the security chip needs to be initialized and commands need to be issued to it in order to activate the devices that are connected via it. And as Apple is the only party with explicitly knowledge of how to do these things, thus only company issuing software that can do these things, getting an OS they don’t official support to boot is difficult.&lt;/p&gt;&#xA;&lt;p&gt;However, it isn’t totally impossible either.&lt;/p&gt;&#xA;&lt;p&gt;Quite a bit of effort has been spent trying to hack/reverse engineer the security chips and in fact a vulnerability (at least 1 major one) was discovered some time ago (the people that did so &amp;amp; those that wrote about it even tried contacting apple well before publishing anything about it, but seems as though Apple wasn’t/interesting in making a comment (let alone doing anything to plug the hole in people’s machines (if I recall correctly new hardware would be necessary, so replacing the chip with the very latest ones for apple silicone. If I recall correctly).&lt;/p&gt;&#xA;&lt;p&gt;So this vulnerability has been using to boot foreign OS’, specifically Linux obvi, and there is some info out there on how to implement the ‘exploit’.&#xA;I don’t have the links off the top of my head, but armed with that info I’m sure it wouldn’t take long to come up with a search query that would get you what you’re looking for (bonus: I believe part of the name of the exploit was ‘rain’. Read about this a while back so...).&lt;/p&gt;&#xA;&lt;p&gt;But be forewarned, at the time I read about it they were far from having full feature parity with the oldest models being the furthest along for obvious reasons. And there may be some cases, at least with MacBooks, where some of the hardware was unique enough that drivers would be needed from the manufacturer(s) who obvi don’t have any interest in making any.&lt;/p&gt;&#xA;&lt;p&gt;As you’re Mac is a 2018 model &amp;amp; an iMac hopefully it will be doable, but definitely look into what they have working before hand (cause  you could end up throwing a bunch of man hours down the drain).&lt;/p&gt;&#xA;&lt;p&gt;How this is helpful&lt;/p&gt;&#xA;" OwnerUserId="24493" LastActivityDate="2020-11-26T06:36:34.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26058" PostTypeId="2" ParentId="20872" CreationDate="2020-11-26T11:45:54.497" Score="0" Body="&lt;p&gt;in addition to &lt;strong&gt;rasmus91&lt;/strong&gt; solution&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;works fine on &lt;strong&gt;eOS 5.1.7 Hera&lt;/strong&gt; and &lt;strong&gt;Nextcloud 20.0.1&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;if NC is installed on a path like: &lt;code&gt;yourdomain.com/nextcloud&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;add the path before remote.php &lt;code&gt;nextcloud/remote.php/webdav/&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I needed to figure that out for 10min..&lt;/p&gt;&#xA;" OwnerUserId="23380" LastActivityDate="2020-11-26T11:45:54.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26059" PostTypeId="1" CreationDate="2020-11-26T19:38:22.963" Score="0" ViewCount="18" Body="&lt;p&gt;I create with Rufus iso in a pendrive.&#xA;I restart and boot from pendrive, appears the logo, and freeze there 30 minutes..&lt;/p&gt;&#xA;&lt;p&gt;whats the problem?&lt;/p&gt;&#xA;" OwnerUserId="24499" LastActivityDate="2020-11-26T19:38:22.963" Title="Cant install, stuck in logo . How can I instal elementary?" Tags="|system-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26067" PostTypeId="1" CreationDate="2020-11-28T21:22:28.683" Score="0" ViewCount="81" Body="&lt;p&gt;when i try to play minecraft java, it shows me this:&lt;/p&gt;&#xA;&lt;p&gt;Unable to locate the Java runtime.&lt;/p&gt;&#xA;&lt;p&gt;Error details: Success&#xA;Filename on disk: java&#xA;Path: /usr/bin/java&#xA;Exists: Directory&lt;/p&gt;&#xA;&lt;p&gt;So minecraft does not want to work...&lt;/p&gt;&#xA;" OwnerUserId="24519" LastActivityDate="2020-11-30T02:41:50.520" Title="minecraft java edition does not want to work" Tags="|java|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26069" PostTypeId="1" CreationDate="2020-11-29T02:22:56.383" Score="0" ViewCount="125" Body="&lt;p&gt;I have a desktop that has Elementary installed. I often use the desktop remotely, over SSH through local LAN or with &lt;a href=&quot;https://tailscale.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tailscale&lt;/a&gt;, but I am often disconnected from my session when using SSH. I found this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16817/how-to-prevent-computer-from-sleeping-or-suspending&quot;&gt;SE answer&lt;/a&gt; about it disables suspending and sleeping completely.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to disable suspend/sleep when using SSH?&lt;/p&gt;&#xA;" OwnerUserId="24521" LastActivityDate="2020-12-30T03:05:20.533" Title="Prevent desktop from sleeping or suspending while using SSH" Tags="|suspend|power|ssh|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26072" PostTypeId="2" ParentId="12875" CreationDate="2020-11-29T12:57:50.100" Score="1" Body="&lt;p&gt;Also encountered this quirk in &lt;code&gt;elementary OS 5.1.7 Hera&lt;/code&gt;. There is no &lt;code&gt;Forget this network&lt;/code&gt; style option for quick removal. It has to be removed manually.&lt;/p&gt;&#xA;&lt;p&gt;The &lt;code&gt;terminal&lt;/code&gt;-based method, as per the follow-up comment by rdanter and the &lt;a href=&quot;https://askubuntu.com/questions/284018/is-there-a-way-to-make-ubuntu-forget-a-network-connection&quot;&gt;manual removal procedure&lt;/a&gt; in Debian is:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;cd /etc/NetworkManager/system-connections/&lt;/code&gt;&lt;br&gt;&#xA;&lt;code&gt;sudo rm WIFINEWTORK&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;This solves the issue in my situation as well.&lt;/p&gt;&#xA;" OwnerUserId="20440" LastActivityDate="2020-11-29T12:57:50.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26073" PostTypeId="1" AcceptedAnswerId="26075" CreationDate="2020-11-29T15:27:57.960" Score="1" ViewCount="50" Body="&lt;p&gt;I made this simple application and made it so that the window position and size is saved on closing the app, so that the next time the user opens the app, he can resume his work directly.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://drive.google.com/drive/folders/1YJFU2u0LNC7YO3Hwk3ts32EDh-Q965Gi?usp=sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://drive.google.com/drive/folders/1YJFU2u0LNC7YO3Hwk3ts32EDh-Q965Gi?usp=sharing&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is the link to the source code of my app.&lt;/p&gt;&#xA;&lt;p&gt;Can anyone review the code and point out my mistake?&lt;/p&gt;&#xA;" OwnerUserId="23610" LastEditorUserId="9445" LastEditDate="2020-11-29T17:09:12.500" LastActivityDate="2020-11-29T17:09:12.500" Title="Window position and size not saved when app is closed" Tags="|development|vala|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26074" PostTypeId="1" CreationDate="2020-11-29T16:24:40.270" Score="0" ViewCount="100" Body="&lt;p&gt;Hey guys having a problem getting a second screen working on Elementary. I’ve searched high and low, tried every sudo update drivers help that can be found but nothing works.&lt;/p&gt;&#xA;&lt;p&gt;I’m using a Dell Inspiron N5110, Intel Corporation 2nd Gen Core Processor Family Integrated Graphics card. I’m trying to connect it to a Samsung TV via HDMI.&lt;/p&gt;&#xA;&lt;p&gt;Problem is as the laptop starts and begins to load elementary it works fine. It also works fine in Windows. Problem only occurs after the login screen begins to load, at which point the screen goes back to the laptop screen as the main screen and Elementary doesn’t recognise there is a TV/Screen connected.&lt;/p&gt;&#xA;&lt;p&gt;Ideally I wanted 3 screens connected. The main laptop screen, a side monitor I have connected via the blue VGA I think it’s called, connector to the back and the TV connected via HDMI side port to the TV on the wall. Couldn’t get it to work even on windows which makes me think it must be the Inter Family card being so basic it only allows 2 screens at a time and not 3?&lt;/p&gt;&#xA;&lt;p&gt;It became such a hassle, at this stage I would be happy just getting the main screen and TV to work via HDMI.&lt;/p&gt;&#xA;&lt;p&gt;But it’s driving me crazy why it has all the drivers needed on startup but once started up stops using them or forgets their location or something?&lt;/p&gt;&#xA;&lt;p&gt;Any help greatly appreciated, thanks.&lt;/p&gt;&#xA;" OwnerUserId="24424" LastActivityDate="2023-12-16T00:09:51.307" Title="Elementary OS Driver Issue" Tags="|graphic-drivers|drivers|dell|monitors|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26075" PostTypeId="2" ParentId="26073" CreationDate="2020-11-29T17:01:33.343" Score="1" Body="&lt;p&gt;You seem to be missing one last step, actually calling the function that is supposed to save the new values in the gsettings schema. To do this, you need to connect the &lt;a href=&quot;https://valadoc.org/gtk+-3.0/Gtk.Widget.delete_event.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;delete_event&lt;/a&gt; signal to your &lt;code&gt;before_destroy ()&lt;/code&gt; function. I like to place that right before calling &lt;code&gt;show_all ()&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nTrgt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nTrgt.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also, the &lt;code&gt;before_destroy ()&lt;/code&gt; function must return &lt;code&gt;false&lt;/code&gt; for the window to actually close.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4kIqJ.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4kIqJ.gif&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT: Please look into using a github repository, sharing google drive links is not recommended.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-11-29T17:01:33.343" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26076" PostTypeId="2" ParentId="26069" CreationDate="2020-11-30T02:35:43.510" Score="1" Body="&lt;p&gt;You can use something like &lt;code&gt;systemd-inhibit&lt;/code&gt; to block sleep/suspend while you're running the command. This has the express benefit of being a dynamic solution, rather than masking the calls entirely.&lt;/p&gt;&#xA;&lt;p&gt;Eg:&#xA;&lt;code&gt;systemd-inhibit --what=sleep --mode=block ssh&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I use this to stop my machines from shutting down while my backups are running. Once the command completes, it stops blocking sleep.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-11-30T02:35:43.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26077" PostTypeId="2" ParentId="26067" CreationDate="2020-11-30T02:41:50.520" Score="1" Body="&lt;p&gt;Which launcher are you using?&lt;/p&gt;&#xA;&lt;p&gt;Mojang has an official Minecraft launcher available that is packaged as a .deb file. This is the traditionally recommended method, but not the only one.&lt;/p&gt;&#xA;&lt;p&gt;You can find this at &lt;a href=&quot;https://minecraft.net/download/alternative&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://minecraft.net/download/alternative&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You can install the .deb via the CLI using &lt;code&gt;sudo apt install /path/to/Minecraft.deb&lt;/code&gt;, or use a tool like Eddy from AppCenter to do it with the GUI.&lt;/p&gt;&#xA;&lt;p&gt;Beyond this, there is a Flatpak available on Flathub. You can download the .flatpakref file from &lt;a href=&quot;https://flathub.org/apps/details/com.mojang.Minecraft&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/com.mojang.Minecraft&lt;/a&gt; by hitting the &amp;quot;Install&amp;quot; button on the page.&lt;/p&gt;&#xA;&lt;p&gt;To install, you just need to open the downloaded Flatpak and Sideload (elementary OS's Flatpak helper) should walk you through it.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-11-30T02:41:50.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26078" PostTypeId="2" ParentId="1953" CreationDate="2020-11-30T05:35:13.827" Score="0" Body="&lt;p&gt;Like so many of you I could not get Geary to accept my SMTP details, even though they work in other email clients.&lt;/p&gt;&#xA;&lt;p&gt;My answer is similar to the OP's comment under r3bl's answer...&lt;/p&gt;&#xA;&lt;p&gt;Go into the &lt;code&gt;AppCenter&lt;/code&gt;, go to the &lt;code&gt;Communications&lt;/code&gt; category and then downoad and install &lt;code&gt;Evolution Mail&lt;/code&gt;. Put in your email details and youare up and going.&lt;/p&gt;&#xA;" OwnerUserId="24426" LastActivityDate="2020-11-30T05:35:13.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26083" PostTypeId="2" ParentId="26074" CreationDate="2020-11-30T16:13:52.287" Score="0" Body="&lt;p&gt;So after trying everything I could think of and not being able to find help from anywhere I decided to install Linux Mint on a separate partition.&lt;/p&gt;&#xA;&lt;p&gt;To my surprise Mint recognised all the screens no problem but encountered an error when trying to activate the third screen from the display settings. Again, I think the Dell Family Card just doesn’t have enough juice but I’m a tech noob so don’t quote me.&lt;/p&gt;&#xA;&lt;p&gt;I configured it the way I wanted it, TV as the main screen and laptop monitor as the second and it worked great.&lt;/p&gt;&#xA;&lt;p&gt;Swapped over to Elementary and surprisingly whatever the issue was, installing Linux Mint fixed it. There’s a bug somewhere it would seem within Elementary but Mint doesn’t have the bug.&lt;/p&gt;&#xA;&lt;p&gt;If others are stuck with the same issue and another install is an option I would do it, get your setup working as you wish then delete the OS you don’t want.&lt;/p&gt;&#xA;" OwnerUserId="24424" LastActivityDate="2020-11-30T16:13:52.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26084" PostTypeId="1" CreationDate="2020-11-30T17:34:26.273" Score="1" ViewCount="39" Body="&lt;p&gt;I have a small computer running &lt;strong&gt;ElementaryOS 5.1 Hera&lt;/strong&gt; with an issue I am not yet able to explain. The IPv4 network connection stops working after a certain amount of operation, about an hour or so.&#xA;When the system starts up, the settings panel for my wired ethernet connection looks fine and connection works well. Shown on screenshot#1.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uWnhs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uWnhs.png&quot; alt=&quot;Wired connection settings - All OK&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then, after some time of operation, what I notice is that all downloads/seeds in Transmission are stalled, or opening an SSH or SFTP connection to another computer on my home network fails, etc. At that point the settings panel of the wired ethernet connection no longer shows the values of the &lt;strong&gt;IPv4 address&lt;/strong&gt;, &lt;strong&gt;subnet mask&lt;/strong&gt;, and &lt;strong&gt;router&lt;/strong&gt; fields. IPv6 address is still there though. This is shown on screenshot#2.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/nowbf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nowbf.png&quot; alt=&quot;Wired connection settings - No IPv4&quot; /&gt;&lt;/a&gt;&#xA;In the top-right corner of this settings panel, there is a little slider button. All I need to do is slide it to the OFF position, and immediately slide it back to the ON position, and the wired ethernet interface once again has IPv4 address, subnet mask, router, and my connection works fine. Looks like a &lt;strong&gt;DHCP renew&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I was wondering if this is related to the Lease Time of my DHCP server &lt;em&gt;(the connection box provided by my ISP - has a web management interface)&lt;/em&gt;. But other computers on the same network never behave this way. There is a Mac laptop running macOS, another laptop running Windows, and a desktop PC running FreeBSD. Only the mini computer with ElementaryOS drops its IPv4 settings, and only after an hour or so, the others always work fine for as long as we keep them on. Also, the mini computer does not drop its IPv4 settings when a different operating system is used on it &lt;em&gt;(tried with FreeBSD and Windows)&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I am not very familiar with ElementaryOS, particularly about its internal workings and most of the Linux-specific things in it. I have way more experience with the BSDs. So this may just be something very trivial for an average Linux guy.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Question:&lt;/strong&gt; What can I do to stop the IPv4 configuration vanishing from the Hera machine? Or what can I do to automatically get this refreshed when it expired?&lt;/p&gt;&#xA;&lt;p&gt;Any suggestion or pointer is much appreciated. And I do not mind to RTFM once I am pointed to the appropriate pages.&lt;/p&gt;&#xA;" OwnerUserId="24531" LastActivityDate="2020-11-30T17:34:26.273" Title="Losing IPv4 network connection after an hour" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26087" PostTypeId="2" ParentId="18840" CreationDate="2020-12-01T06:45:52.403" Score="1" Body="&lt;p&gt;Hey there I wondered the same thing! and I hope that this starts to be something that makes it into the system settings some day. The reason being: that once you have set it up, it is out of the way and you don't think about it ever again.&lt;/p&gt;&#xA;&lt;p&gt;I have used a different option that is a more straight forward slider that you can drag and set the speed.&lt;/p&gt;&#xA;&lt;p&gt;I used &lt;a href=&quot;http://imwheel.sourceforge.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;imwheel&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and followed these instructions&lt;br /&gt;&#xA;&lt;a href=&quot;https://dev.to/bbavouzet/ubuntu-20-04-mouse-scroll-wheel-speed-536o&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dev.to/bbavouzet/ubuntu-20-04-mouse-scroll-wheel-speed-536o&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;How To&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;install&lt;/em&gt; -&amp;gt; &lt;code&gt;sudo apt install imwheel&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;create the script file&lt;/em&gt;. I use a folder for scripts &lt;code&gt;mkdir ~/Utils&lt;/code&gt; where I created the file &lt;code&gt;touch mousewheel.sh&lt;/code&gt; and pasted the &lt;a href=&quot;https://dev.to/bbavouzet/ubuntu-20-04-mouse-scroll-wheel-speed-536o&quot; rel=&quot;nofollow noreferrer&quot;&gt;template&lt;/a&gt; (section 2) in &lt;code&gt;vim ~/Utils/mousewheel.sh&lt;/code&gt; then move to the script &lt;code&gt;cd ~/Utils/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;make it executable&lt;/em&gt; &lt;code&gt;chmod +x mousewheel.sh&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;run it&lt;/em&gt; &lt;code&gt;./mousewheel.sh&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;The scale is way too long, I use 5-7 depending on what I am doing.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;add it to the startup apps&lt;/em&gt; there head to the&lt;br /&gt;&#xA;System Settings -&amp;gt; Applications -&amp;gt; Startup -&amp;gt; Add Startup App... (bottom left corner) and add it as a script, just &lt;code&gt;imwheel&lt;/code&gt; or in my case &lt;code&gt;imwheel -b &amp;quot;4 5&amp;quot;&lt;/code&gt; because the side buttons didn't work anymore and this fixes it&lt;/p&gt;&#xA;&lt;p&gt;I hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="24476" LastActivityDate="2020-12-01T06:45:52.403" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26089" PostTypeId="1" CreationDate="2020-12-01T10:50:04.057" Score="0" ViewCount="235" Body="&lt;p&gt;I decided to install ElementaryOs alongside with Windows 10 (dual boot), and I have spend all day looking for an answer to my problem and nothing works.&lt;/p&gt;&#xA;&lt;p&gt;If I open the settings on ElementaryOs it only shows on the side &amp;quot;Wired&amp;quot;/&amp;quot;VPN&amp;quot;/&amp;quot;Proxy&amp;quot; and nothing about Wi-Fi.&lt;/p&gt;&#xA;&lt;p&gt;In the Windows 10 it works just fine.&lt;/p&gt;&#xA;&lt;p&gt;I have tried this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uP5p0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uP5p0.png&quot; alt=&quot;dkms status&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aC0Lz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aC0Lz.png&quot; alt=&quot;iwconfig&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Sdq3Y.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sdq3Y.png&quot; alt=&quot;ifconfig -a&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/D783D.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D783D.png&quot; alt=&quot;rfkill list&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;My network card is Realtek. If you need any more info just ask.&lt;/p&gt;&#xA;" OwnerUserId="24539" LastActivityDate="2024-03-17T21:07:10.907" Title="Wifi doesn't show up" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26090" PostTypeId="1" AcceptedAnswerId="26091" CreationDate="2020-12-01T15:39:46.767" Score="1" ViewCount="104" Body="&lt;p&gt;I'm running eOS 5.1.7 (Hera). I see that Apache2 is installed (&lt;code&gt;/usr/sbin/apache2&lt;/code&gt;). However, &lt;code&gt;/etc/apache2&lt;/code&gt; is weird; it only has two directories: &lt;code&gt;conf-available/&lt;/code&gt;(javascript stuff) and &lt;code&gt;mods-available/&lt;/code&gt; (dns stuff)&lt;/p&gt;&#xA;&lt;p&gt;There is no &lt;code&gt;apachectl&lt;/code&gt; nor does there appear to be a service unit for &lt;code&gt;systemctl&lt;/code&gt;. I'm guessing that out-of-the-box, eOS/Hera does not have a full and proper Apache2 install in place. I don't know why eOS would only go half way when installing Apache.&lt;/p&gt;&#xA;&lt;p&gt;To get a fully functional Apache installation, can I just (re)install Apache over this?&lt;/p&gt;&#xA;" OwnerUserId="23062" LastEditorUserId="23062" LastEditDate="2020-12-01T17:58:01.717" LastActivityDate="2020-12-01T19:44:45.203" Title="Starting Apache2 in Hera" Tags="|release-hera|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26091" PostTypeId="2" ParentId="26090" CreationDate="2020-12-01T16:12:10.290" Score="2" Body="&lt;p&gt;It is not clear to me what the question is, but you can easily install apache2 following any online tutorial for ubuntu 18.04&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install apache2&lt;/code&gt; should do the trick&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;systemctl start apache2&lt;/code&gt; to start it&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;systemctl enable apache2&lt;/code&gt; to set it autostart.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://phoenixnap.com/kb/how-to-install-apache-web-server-on-ubuntu-18-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://phoenixnap.com/kb/how-to-install-apache-web-server-on-ubuntu-18-04&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;apache2-bin&lt;/code&gt; is a dependency of &lt;code&gt;apache2&lt;/code&gt;, and, as stated &lt;a href=&quot;https://packages.debian.org/jessie/apache2-bin&quot; rel=&quot;nofollow noreferrer&quot;&gt; here&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;contains the binaries only and does not set up a working web-server&#xA;instance. Install the &amp;quot;apache2&amp;quot; package to get a fully working&#xA;instance.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2020-12-01T19:44:45.203" LastActivityDate="2020-12-01T19:44:45.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26092" PostTypeId="1" CreationDate="2020-12-02T06:06:30.590" Score="0" ViewCount="57" Body="&lt;p&gt;Using for several months. Now wingpanel got stuck after a min from loading and during that a notification will appear network not connected.&#xA;After that most of the system app will not respond and sudo command will not execute.&lt;/p&gt;&#xA;" OwnerUserId="24542" LastActivityDate="2023-12-17T15:04:15.473" Title="Wingpanel and system app not repsondong" Tags="|wingpanel|system|plank|startup|sudo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26093" PostTypeId="2" ParentId="26092" CreationDate="2020-12-02T08:53:40.307" Score="0" Body="&lt;p&gt;Access the terminal and reset the desktop settings&#xA;Access the terminal with Ctrl+Alt+F1 and type:&lt;/p&gt;&#xA;&lt;p&gt;$ sudo apt-get install --reinstall elementary-desktop&lt;/p&gt;&#xA;" OwnerUserId="24542" LastActivityDate="2020-12-02T08:53:40.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26095" PostTypeId="2" ParentId="26089" CreationDate="2020-12-02T23:15:56.700" Score="0" Body="&lt;p&gt;I had the same issue with my HP all in one, installed dual boot and low and behold wifi didn't work; furthermore, I didn't have wired connection available. This is how I solved my problem:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Inserted a generic dlink wifi usb dongle I had lying around and it was instantly recognized, this allowed me to access the internet.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I went into applications and opened AppCenter, this allowed me to search for and install &amp;quot;Software and Updates&amp;quot;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;After running and installing all updates, I then ran a search for and installed &amp;quot;rtl8821ce-dkms&amp;quot;. This was the missing driver I needed to recognize my wifi adapter.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Was then able to remove the dlink device and continue on my merry way. I believe I might have rebooted after one or two updates.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerDisplayName="user24547" LastEditorDisplayName="user24547" LastEditDate="2020-12-03T15:07:34.227" LastActivityDate="2020-12-03T15:07:34.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26097" PostTypeId="2" ParentId="25580" CreationDate="2020-12-03T16:24:23.400" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1pYL5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1pYL5.png&quot; alt=&quot;You can assign keys at keyboard settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can set you own Shortcuts in System Settings -&amp;gt; Keyboard -&amp;gt; Screenshots. As for me I just replaced Print key with W key.&lt;/p&gt;&#xA;" OwnerUserId="24553" LastActivityDate="2020-12-03T16:24:23.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26099" PostTypeId="1" AcceptedAnswerId="26103" CreationDate="2020-12-04T02:47:17.810" Score="1" ViewCount="405" Body="&lt;p&gt;I have the Hera OS 5.1. Now when I want to run sudo apt-get update I got the following errors. What can I do? Thanks in advance.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Err:16 http://ppa.launchpad.net/djart/minidlna/ubuntu bionic Release                                  &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:17 http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release          &#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:18 http://co.archive.ubuntu.com/ubuntu hera Release                                               &#xA;  404  Not Found [IP: 91.189.88.152 80]&#xA;Err:19 http://co.archive.ubuntu.com/ubuntu hera-updates Release                                       &#xA;  404  Not Found [IP: 91.189.88.152 80]&#xA;Err:20 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release&#xA;  404  Not Found [IP: 91.189.95.83 80]&#xA;Err:21 http://co.archive.ubuntu.com/ubuntu hera-backports Release&#xA;  404  Not Found [IP: 91.189.88.152 80]&#xA;Traceback (most recent call last):&#xA;  File &amp;quot;/usr/lib/cnf-update-db&amp;quot;, line 8, in &amp;lt;module&amp;gt;&#xA;    from CommandNotFound.db.creator import DbCreator&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/CommandNotFound/db/creator.py&amp;quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;Leyendo lista de paquetes... Hecho&#xA;E: El repositorio «http://packages.elementary.io/appcenter hera Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://security.ubuntu.com/ubuntu hera-security Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://ppa.launchpad.net/djart/minidlna/ubuntu bionic Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://co.archive.ubuntu.com/ubuntu hera Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://co.archive.ubuntu.com/ubuntu hera-updates Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://ppa.launchpad.net/elementary-os/os-patches/ubuntu hera Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: El repositorio «http://co.archive.ubuntu.com/ubuntu hera-backports Release» no tiene un fichero de Publicación.&#xA;N: No se puede actualizar de un repositorio como este de forma segura y por tanto está deshabilitado por omisión.&#xA;N: Vea la página de manual apt-secure(8) para los detalles sobre la creación de repositorios y la configuración de usuarios.&#xA;E: Problem executing scripts APT::Update::Post-Invoke-Success 'if /usr/bin/test -w /var/lib/command-not-found/ -a -e /usr/lib/cnf-update-db; then /usr/lib/cnf-update-db &amp;gt; /dev/null; fi'&#xA;E: Sub-process returned an error code&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Still persist this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Obj:8 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease  &#xA;Traceback (most recent call last):                     &#xA;  File &amp;quot;/usr/lib/cnf-update-db&amp;quot;, line 8, in &amp;lt;module&amp;gt;&#xA;    from CommandNotFound.db.creator import DbCreator&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/CommandNotFound/db/creator.py&amp;quot;, line 11, in &amp;lt;module&amp;gt;&#xA;    import apt_pkg&#xA;ModuleNotFoundError: No module named 'apt_pkg'&#xA;Leyendo lista de paquetes... Hecho&#xA;E: Problem executing scripts APT::Update::Post-Invoke-Success 'if /usr/bin/test -w /var/lib/command-not-found/ -a -e /usr/lib/cnf-update-db; then /usr/lib/cnf-update-db &amp;gt; /dev/null; fi'&#xA;E: Sub-process returned an error code&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24558" LastEditorUserId="9445" LastEditDate="2020-12-10T10:51:57.343" LastActivityDate="2020-12-10T10:51:57.343" Title="Error when trying sudo apt-get update" Tags="|updates|apt|repositories|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26100" PostTypeId="2" ParentId="26099" CreationDate="2020-12-04T03:10:16.207" Score="0" Body="&lt;p&gt;You've added PPAs to your system which have caused breakages. Remove the PPAs you've added by adding &lt;code&gt;--remove&lt;/code&gt; to the command you used to add it.&lt;/p&gt;&#xA;" OwnerUserId="19843" LastActivityDate="2020-12-04T03:10:16.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26101" PostTypeId="2" ParentId="13781" CreationDate="2020-12-04T04:04:12.233" Score="0" Body="&lt;p&gt;To modify a system or locked folder in Elementary OS or linux, open Terminal (Window + T or Command + T) and simply use this two commands below: (run one command each times)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo su &#xA;chmod -R go+rw /path/folder name &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Example: &lt;code&gt;chmod -R go+rw /opt/lampp&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24559" LastEditorUserId="26" LastEditDate="2020-12-06T04:28:16.517" LastActivityDate="2020-12-06T04:28:16.517" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26103" PostTypeId="2" ParentId="26099" CreationDate="2020-12-04T09:28:37.807" Score="1" Body="&lt;p&gt;Your issue seems to be caused by some obsolete / wrong repositories.&lt;/p&gt;&#xA;&lt;p&gt;First one (&lt;a href=&quot;http://ppa.launchpad.net/djart/minidlna/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/djart/minidlna/ubuntu&lt;/a&gt;) was not updated since 2014, and using it is a really bad idea. You can remove it safely with:&lt;br /&gt;&#xA;&lt;code&gt;sudo add-apt-repository --remove ppa:djart/minidlna&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;For the next ones, you'll have to do some source.list editing, because they contain the name &lt;code&gt;hera&lt;/code&gt; instead of &lt;code&gt;bionic&lt;/code&gt;. To do this, open Files as Administrator (right-click the Files icon), go to &lt;code&gt;/etc/apt&lt;/code&gt; and open the &lt;code&gt;sources.list&lt;/code&gt; file in Code. Look for the repositories listed in the errors and replace &lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt;. For example:&lt;br /&gt;&#xA;&lt;code&gt;[...]ubuntu hera Release&lt;/code&gt; should become &lt;code&gt;[...]ubuntu bionic Release&lt;/code&gt; and &lt;code&gt;[...]ubuntu hera-backports Release&lt;/code&gt; should become &lt;code&gt;[...]ubuntu bionic-backports Release&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You might have to look into the &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; folder, for example the &lt;code&gt;elementary.list&lt;/code&gt; file might contain the &lt;code&gt;http://ppa.launchpad.net/elementary-os/stable/ubuntu hera Release&lt;/code&gt; ppa. If so, just like in the above case, replace h&lt;code&gt;hera&lt;/code&gt; with &lt;code&gt;bionic&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Save your changes and run a &lt;code&gt;sudo apt update&lt;/code&gt; again, to see the changes. If error still persist, add them to your question.&lt;/p&gt;&#xA;&lt;p&gt;SImilar issue described here: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/24574/help-fixing-winehq-error-hera-release-does-not-have-a-release-file/24576#24576&quot;&gt;help fixing winehq error : hera Release does not have a Release file&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-12-04T09:28:37.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26106" PostTypeId="1" CreationDate="2020-12-04T18:48:27.447" Score="0" ViewCount="234" Body="&lt;p&gt;I'm following &lt;a href=&quot;https://fullstackopen.com/en/part3/saving_data_to_mongo_db#fetching-objects-from-the-database&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; fullstack course but I'm not able to connect to my mongoDB Atlas database.&lt;/p&gt;&#xA;&lt;p&gt;To go directly to the issue, after trying many things to identify the root of the problem, I tried the (troubleshooting) Ensure network connectivity &lt;a href=&quot;https://docs.mlab.com/troubleshooting-atlas-connection-issues/#4-ensure-network-connectivity&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; with the cluster shard links and none of them worked. Particularly access it in the browser just kept &amp;quot;loading&amp;quot;. When I ran the &lt;code&gt; host my-atlas-cluster-shard-00-00-mdyjt.mongodb.net&lt;/code&gt; (but with the good link) it returned not found. Would there be a way to fix this that would not require going to my &amp;quot;network administrator&amp;quot; or whatever that is?&lt;/p&gt;&#xA;&lt;p&gt;Other things that I have tried/to know:&lt;/p&gt;&#xA;&lt;p&gt;I have had a whitelist entry that allows access from anywhere as per the tutorial since the beginning and I'm certain my username is ok in the url (it is Database Acces one, etc.) so I don't think that's the issue.&lt;/p&gt;&#xA;&lt;p&gt;I tried the code below (node, using mongoose) and it didn't work. And I suspected the issue isn't the code because it is copy pasted from the tutorial. I tried the official mongoDB node.js library and it also didn't work (also connection timeOut). I even installed MongoCompass and got a connection timeout (which is what confirms it isn't a coding error).&lt;/p&gt;&#xA;&lt;p&gt;I did some research and it seems like the issue is my firewall blocks access to 27017, as suggested &lt;a href=&quot;https://docs.atlas.mongodb.com/troubleshoot-connection/#attempting-to-connect-to-a-cluster-from-behind-a-firewall&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, and I tried the &lt;a href=&quot;http://portquiz.net:27017/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://portquiz.net:27017/&lt;/a&gt; and at first it didn't work at all (the page never loaded). I temporarily disabled my ufw to try and now it sort of works: the page loads at the beginning, but it keeps &amp;quot;loading&amp;quot; (even if I can see the content) and after a while it disappears.&lt;/p&gt;&#xA;&lt;p&gt;Then I temporarily allowed access for everything in iptables and the portquiz page worked (and didn't keep loading forever), but I still couldn't access my cluster. So I have no idea what's the issue here.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;const mongoose = require('mongoose')&#xA;&#xA;&#xA;const url =  &amp;quot;/* here i put my url with the appropiate username, password, database name, etc.*/&amp;quot;&#xA;&#xA;mongoose.connect(url, { useNewUrlParser: true, useUnifiedTopology: true, useFindAndModify: false, useCreateIndex: true })&#xA;&#xA;const noteSchema = new mongoose.Schema({   content: String,   date: Date,   important: Boolean })&#xA;&#xA;const Note = mongoose.model('Note', noteSchema)&#xA;&#xA;const note = new Note({   content: 'HTML is Easy',   date: new Date(), important: true })&#xA;&#xA;note.save().then(result =&amp;gt; {   console.log('note saved!')   mongoose.connection.close() })&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This is the error I get when I run that file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/home/julia/test-rep/node_modules/mongoose/lib/drivers/node-mongodb-native/collection.js:184&#xA;          callback(new MongooseError(message));&#xA;                   ^&#xA;&#xA;MongooseError: Operation `notes.insertOne()` buffering timed out after 10000ms&#xA;    at Timeout.&amp;lt;anonymous&amp;gt; (/home/julia/test-rep/node_modules/mongoose/lib/drivers/node-mongodb-native/collection.js:184:20)&#xA;    at listOnTimeout (node:internal/timers:556:17)&#xA;    at processTimers (node:internal/timers:499:7)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've gotten this error with MongoClient:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;MongoServerSelectionError: connection timed out&#xA;    at Timeout._onTimeout (/home/julia/node_modules/mongodb/lib/core/sdam/topology.js:438:30)&#xA;    at listOnTimeout (node:internal/timers:556:17)&#xA;    at processTimers (node:internal/timers:499:7)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;as well as this error when going into more detail:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;MongoServerSelectionError: connection timed out&#xA;    at Timeout._onTimeout (/home/julia/node_modules/mongodb/lib/core/sdam/topology.js:438:30)&#xA;    at listOnTimeout (node:internal/timers:556:17)&#xA;    at processTimers (node:internal/timers:499:7) {&#xA;  reason: TopologyDescription {&#xA;    type: 'ReplicaSetNoPrimary',&#xA;    setName: 'atlas-z3fex8-shard-0',&#xA;    maxSetVersion: null,&#xA;    maxElectionId: null,&#xA;    servers: Map(3) {&#xA;      '/*name of my*/cluster-shard-00-00.9a0bz.mongodb.net:27017' =&amp;gt; [ServerDescription],&#xA;      '/*name of my*/cluster-shard-00-02.9a0bz.mongodb.net:27017' =&amp;gt; [ServerDescription],&#xA;      '/*name of my*/cluster-shard-00-01.9a0bz.mongodb.net:27017' =&amp;gt; [ServerDescription]&#xA;    },&#xA;    stale: false,&#xA;    compatible: true,&#xA;    compatibilityError: null,&#xA;    logicalSessionTimeoutMinutes: 30,&#xA;    heartbeatFrequencyMS: 10000,&#xA;    localThresholdMS: 15,&#xA;    commonWireVersion: 8&#xA;  }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I think maybe there's some issue with my computer or who knows what.&#xA;I would really appreciate any help!&lt;/p&gt;&#xA;" OwnerUserId="14933" LastActivityDate="2020-12-04T18:48:27.447" Title="Impossible to connect to mongoDB Atlas: firewall issue? DNS issue? Have no idea" Tags="|firewall|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26108" PostTypeId="1" CreationDate="2020-12-05T10:54:45.900" Score="0" ViewCount="79" Body="&lt;p&gt;all quick question about the login screen. I get a short freeze after boot (about 5 seconds). After boot login-screen background is gray, then it turns black and everything freeze, after that it turn again gray and is usable. After typing the password i get a complete black screen, mouse is moved to right bottom corner an i get a freeze again for a few seconds, after that my desktop appears and everything works fine.&#xA;Is that normal, i guess i have problems with drivers?&lt;/p&gt;&#xA;&lt;p&gt;Thanks you! :)&lt;/p&gt;&#xA;" OwnerUserId="24565" LastActivityDate="2024-01-20T16:05:25.747" Title="Freeze on Login-Screen" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26109" PostTypeId="2" ParentId="26108" CreationDate="2020-12-05T11:14:53.617" Score="0" Body="&lt;p&gt;I also get sometime graphical issues, like the drop down-menue edges are not disappearing.&lt;/p&gt;&#xA;&lt;p&gt;I tried to install mint driver manager, i have it now in my menu, but i cant start.&lt;/p&gt;&#xA;&lt;p&gt;I run elementaryOS on a Notebook with an Ryzen 5 3500 and a integrated Readeon Vega.&lt;/p&gt;&#xA;" OwnerUserId="24565" LastActivityDate="2020-12-05T11:14:53.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26110" PostTypeId="1" CreationDate="2020-12-05T13:44:40.623" Score="0" ViewCount="146" Body="&lt;p&gt;I downloaded Spotify app via snaps and it doesn't show up in app list. Notifications also fall under &amp;quot;other&amp;quot; category.&lt;/p&gt;&#xA;&lt;p&gt;I searched that to add an application icon, I should add &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;/usr/share/applications&lt;/code&gt; Apps from snap have those files under &lt;code&gt;/var/lib/snapd/desktop/applications&lt;/code&gt;. Should I simply copy that file?&lt;/p&gt;&#xA;&lt;p&gt;Will adding &lt;code&gt;X-GNOME-UsesNotifications=true&lt;/code&gt; allow me to control the notifications from Spotify separately from other apps?&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2023-12-24T13:08:51.137" Title="How to provide icons and notification control for snap apps?" Tags="|notifications|thirdpartyapps|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26111" PostTypeId="1" AcceptedAnswerId="26151" CreationDate="2020-12-05T16:28:28.947" Score="1" ViewCount="59" Body="&lt;p&gt;I used Gtk.StackSidebar to create a sidebar for an app that I am making.&#xA;&lt;a href=&quot;https://github.com/Suzie97/Project_X97&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Suzie97/Project_X97&lt;/a&gt;, this is the link to my github repo.&lt;/p&gt;&#xA;&lt;p&gt;The sidebar is not correctly visible on the window. The entire window is captured by one button and the other button is not visible.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CySvV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CySvV.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Can anyone review the code please.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-12-16T10:27:20.457" Title="StackSIdebar is not visible" Tags="|development|vala|gtk|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26112" PostTypeId="1" CreationDate="2020-12-05T21:53:24.023" Score="0" ViewCount="142" Body="&lt;p&gt;I'm running my usual sudo apt upgrade and I'm getting the following and not sure what it means or what I need to do:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease&#xA;Hit:2 http://gb.archive.ubuntu.com/ubuntu bionic InRelease                                                                                                    &#xA;Hit:3 http://gb.archive.ubuntu.com/ubuntu bionic-updates InRelease                                                                                            &#xA;Hit:4 http://gb.archive.ubuntu.com/ubuntu bionic-backports InRelease                                                                                          &#xA;Hit:5 http://ppa.launchpad.net/flexiondotorg/audio/ubuntu bionic InRelease                                                                                    &#xA;Hit:6 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                                                               &#xA;Hit:7 https://dl.winehq.org/wine-builds/ubuntu bionic InRelease                                                                                               &#xA;Hit:8 http://packages.elementary.io/appcenter bionic InRelease                                                                                                &#xA;Hit:9 https://brave-browser-apt-release.s3.brave.com bionic InRelease                                                                                         &#xA;Hit:10 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease                                                                        &#xA;Hit:11 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease                                               &#xA;Hit:12 https://repo.nordvpn.com/deb/nordvpn/debian stable InRelease                            &#xA;Hit:13 http://security.ubuntu.com/ubuntu bionic-security InRelease                                                        &#xA;Err:14 http://ppa.launchpad.net/wireguard/wireguard/ubuntu bionic InRelease                                               &#xA;  403  Forbidden [IP: 91.189.95.83 80]&#xA;Hit:15 http://dl.google.com/linux/chrome/deb stable InRelease                                       &#xA;Reading package lists... Done                      &#xA;E: Failed to fetch http://ppa.launchpad.net/wireguard/wireguard/ubuntu/dists/bionic/InRelease  403  Forbidden [IP: 91.189.95.83 80]&#xA;E: The repository 'http://ppa.launchpad.net/wireguard/wireguard/ubuntu bionic InRelease' is no longer signed.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;W: Skipping acquire of configured file 'restricted/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?```&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&lt;p&gt;How do I get rid of the long list of 'Skipping acquire of configured file'? I don't know what it means&lt;/p&gt;&#xA;" OwnerUserId="16805" LastEditorUserId="16805" LastEditDate="2020-12-06T19:14:40.997" LastActivityDate="2023-12-22T10:04:15.597" Title="Trouble with running updates" Tags="|release-hera|updates|" AnswerCount="1" CommentCount="20" ContentLicense="CC BY-SA 4.0" />
  <row Id="26114" PostTypeId="1" CreationDate="2020-12-06T12:53:31.363" Score="0" ViewCount="67" Body="&lt;p&gt;Is it necessary for a developer to upload an app written in vala only? Can't it be something c++ or python to be uploaded on Elementary's app store?&lt;/p&gt;&#xA;&lt;p&gt;I really want to contribute for them but don't want to make a language shift.&lt;/p&gt;&#xA;" OwnerUserId="24572" LastActivityDate="2023-12-29T16:02:10.270" Title="Can I upload an app which is not built using vala?" Tags="|appcenter|vala|elementary-website|thirdpartyapps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26115" PostTypeId="2" ParentId="26112" CreationDate="2020-12-06T14:20:14.897" Score="0" Body="&lt;p&gt;Now when I run sudo apt update I get:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://gb.archive.ubuntu.com/ubuntu bionic InRelease&#xA;Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease                                                                                             &#xA;Hit:3 http://dl.google.com/linux/chrome/deb stable InRelease                                                                                                  &#xA;Hit:4 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                                                   &#xA;Hit:5 http://gb.archive.ubuntu.com/ubuntu bionic-updates InRelease                                                                                            &#xA;Hit:6 https://brave-browser-apt-release.s3.brave.com bionic InRelease                                                                                         &#xA;Hit:7 http://gb.archive.ubuntu.com/ubuntu bionic-backports InRelease                                                                                          &#xA;Hit:8 http://ppa.launchpad.net/flexiondotorg/audio/ubuntu bionic InRelease                                                                 &#xA;Hit:9 https://dl.winehq.org/wine-builds/ubuntu bionic InRelease                                                      &#xA;Hit:10 http://packages.elementary.io/appcenter bionic InRelease                                                           &#xA;Hit:11 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                                          &#xA;Hit:12 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Hit:13 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease&#xA;Hit:14 https://repo.nordvpn.com/deb/nordvpn/debian stable InRelease&#xA;Reading package lists... Done                      &#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;3 packages can be upgraded. Run 'apt list --upgradable' to see them.&#xA;W: Skipping acquire of configured file 'restricted/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'restricted/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'restricted' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'universe/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'universe' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/binary-amd64/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/binary-i386/Packages' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/i18n/Translation-en' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/i18n/Translation-en_GB' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/Components-amd64.yml' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-48x48.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-64x64.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-64x64@2.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/dep11/icons-128x128.tar' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;W: Skipping acquire of configured file 'multiverse/cnf/Commands-amd64' as repository 'http://gb.archive.ubuntu.com/ubuntu bionic InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16805" LastActivityDate="2020-12-06T14:20:14.897" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26117" PostTypeId="2" ParentId="26012" CreationDate="2020-12-06T23:09:45.323" Score="0" Body="&lt;p&gt;The hibernate button &lt;a href=&quot;https://github.com/elementary/switchboard-plug-power/pull/112&quot; rel=&quot;nofollow noreferrer&quot;&gt;was recently removed&lt;/a&gt; because it had stopped working&#xA;due to some changes in Ubuntu (upon which Elementary is based). Like many others,&#xA;suspend doesn't work very well on my PC, so it's very important to me that hibernate&#xA;work properly.&lt;/p&gt;&#xA;&lt;h1&gt;Fix Resume-From-Disk&lt;/h1&gt;&#xA;&lt;p&gt;At least in my experience, if you try to run &lt;code&gt;systemctl hibernate&lt;/code&gt; after a fresh&#xA;install of Hera, the system will happily suspend itself to disk. But it will not&#xA;actually &lt;em&gt;resume&lt;/em&gt; after pressing the power button; instead, it performs a fresh&#xA;boot as if you had simply cut the power instead of hibernating.&lt;/p&gt;&#xA;&lt;p&gt;The issue is that the kernel does not know how to find the swapfile during early&#xA;boot, so it is unable to detect that the system was previously suspended. To fix&#xA;this, we need to provide details about the system's swapfile using the &lt;code&gt;resume&lt;/code&gt;&#xA;and &lt;code&gt;resume_offset&lt;/code&gt; kernel parameters.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;These instructions were taken from &lt;a href=&quot;https://wiki.archlinux.org/index.php/Power_management/Suspend_and_hibernate#Hibernation_into_swap_file&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Arch Wiki page on hibernation&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;First, determine the partition UUID and disk offset of your swapfile:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ findmnt -no UUID -T /swapfile&#xA;&amp;lt;uuid&amp;gt;&#xA;$ sudo filefrag -v /swapfile | awk '{ if($1==&amp;quot;0:&amp;quot;){print $4} }'&#xA;&amp;lt;offset&amp;gt;..&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, open &lt;em&gt;/etc/default/grub&lt;/em&gt; in a text editor and add the &lt;code&gt;resume&lt;/code&gt; and &lt;code&gt;resume_offset&lt;/code&gt;&#xA;kernel parameters to the value of &lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT&lt;/code&gt; as follows, replacing&#xA;&lt;em&gt;&amp;lt;uuid&amp;gt;&lt;/em&gt; and &lt;em&gt;&amp;lt;offset&amp;gt;&lt;/em&gt; with the values from the previous step.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;... resume=UUID=&amp;lt;uuid&amp;gt; resume_offset=&amp;lt;offset&amp;gt;&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, you must run &lt;code&gt;sudo update-grub&lt;/code&gt; in order for changes to &lt;em&gt;/etc/default/grub&lt;/em&gt;&#xA;to take effect.&lt;/p&gt;&#xA;&lt;h1&gt;ACPI Events&lt;/h1&gt;&#xA;&lt;p&gt;When on battery power, I like for my laptop to hibernate when the lid is shut. I&#xA;also like for the power button to trigger hibernation regardless of whether on AC&#xA;or battery power. This is easy enough to achieve by creating a custom ACPI event&#xA;handler.&lt;/p&gt;&#xA;&lt;p&gt;Before you set this up, be sure to disable any power button or lid close events&#xA;in the System Settings app, as these could interfere with the new event handler&#xA;and cause unwanted behavior.&lt;/p&gt;&#xA;&lt;p&gt;First, create the file &lt;em&gt;/etc/acpi/events/hibernate&lt;/em&gt; with the following contents:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;event=.*&#xA;action=/etc/acpi/hibernate.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, create the file &lt;em&gt;/etc/acpi/hibernate.sh&lt;/em&gt;. This script will be executed any&#xA;time an ACPI event occurs. Add the following lines to trigger hibernation as outlined&#xA;above, or feel free to do something different if you wish!&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;case $1 in&#xA;&#xA;        # Hibernate when power button is pressed&#xA;        button/power)&#xA;                /bin/systemctl hibernate&#xA;                ;;&#xA;&#xA;        # Hibernate when lid is shut while on battery&#xA;        button/lid)&#xA;                if [ $3 = close ]&#xA;                then&#xA;                        AC=$(cat /sys/class/power_supply/AC0/online)&#xA;                        if [ $AC = 0 ] # AC adapter not connected&#xA;                        then&#xA;                                /bin/systemctl hibernate&#xA;                        fi&#xA;                fi&#xA;                ;;&#xA;&#xA;        # Hibernate when AC adapter is unplugged while lid is shut&#xA;        ac_adapter)&#xA;                if [ $4 = 00000000 ] # unplugged&#xA;                then&#xA;                        LID=$(cat /proc/acpi/button/lid/LID0/state | awk '{print $2}')&#xA;                        if [ $LID = closed ]&#xA;                        then&#xA;                                /bin/systemctl hibernate&#xA;                        fi&#xA;                fi&#xA;                ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, mark the new script as executable, then send a signal to &lt;em&gt;acpid&lt;/em&gt; to load&#xA;the new event handler:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# chmod +x /etc/acpi/power.sh&#xA;# systemctl kill -s HUP acpid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;Expand Swap File&lt;/h1&gt;&#xA;&lt;p&gt;Hibernation works by storing the state of all open programs to the swapfile, which&#xA;can fail if the file is not large enough.&lt;/p&gt;&#xA;&lt;p&gt;Hera appears to create a 2GB swapfile by default, which may not be large enough&#xA;to support hibernation if you do a lot of multitasking. A good rule of thumb is&#xA;for your swapfile to be at least as large as RAM.&lt;/p&gt;&#xA;&lt;p&gt;Here's how to expand your swapfile to 8GB. For different sizes, just tweak the &lt;code&gt;dd&lt;/code&gt;&#xA;command options.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# swapoff /swapfile&#xA;# dd if=/dev/zero of=/swapfile blocksize=1M count=8192&#xA;# mkswap /swapfile&#xA;# swapon -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Note resizing the swapfile may change its disk offset, requiring you to use a different&#xA;value for the &lt;code&gt;resume_offset&lt;/code&gt; kernel parameter.&lt;/p&gt;&#xA;&lt;h1&gt;Official Support&lt;/h1&gt;&#xA;&lt;p&gt;Searching GitHub is a great way to understand the status of certain features from&#xA;the developers' perspective. Here's a query that shows all the activity related&#xA;to the keyword &amp;quot;hibernate&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/search?q=org%3Aelementary+hibernate&amp;amp;type=issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/search?q=org%3Aelementary+hibernate&amp;amp;type=issues&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Looks like there are some open PRs to get the hibernate button working again in&#xA;the UI. For the latest updates, I'd recommend subscribing to notifications&#xA;for this PR:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-session/pull/102&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-session/pull/102&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24573" LastActivityDate="2020-12-06T23:09:45.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26118" PostTypeId="1" CreationDate="2020-12-07T04:15:52.900" Score="0" ViewCount="153" Body="&lt;p&gt;I want to do some things like disable system sounds and change some animations. I'm new to linux though, and this OS. Is it possible on elementary or is there an application i can install for more settings? Thanks&lt;/p&gt;&#xA;" OwnerUserId="24579" LastActivityDate="2023-12-23T20:05:25.683" Title="Is there a way to add more settings?" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26120" PostTypeId="1" CreationDate="2020-12-07T16:14:07.677" Score="0" ViewCount="57" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MaB9E.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MaB9E.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;As may be seen above, I suddenly have a red circle with a white &amp;quot;x&amp;quot; in it superimposed on my Fonts and Launcher icons in the sidebar of my tweaks setting panel. Looks like it's trying to warn me about something, but everything seems to work ok. Anyone know what this means?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-12-29T23:04:10.510" Title="what does the red circle with a white x in it on an icon in the tweaks sidebar" Tags="|settings|tweak-tool|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26121" PostTypeId="1" CreationDate="2020-12-07T19:59:24.793" Score="0" ViewCount="60" Body="&lt;p&gt;I'm installing on a 2010 Mac Mini, off of USB.  Ubuntu 20.04 installs fine.  I disabled &amp;quot;splash&amp;quot; and &amp;quot;quiet&amp;quot; in grub.  I don't see any error messages.  The kernel boots and then hangs with a gray rectangle across a black screen.  It takes up about 1/3 of the screen down the middle.&lt;/p&gt;&#xA;&lt;p&gt;I've tried adding &amp;quot;vga=ask&amp;quot; &amp;quot;vga=1280×720&amp;quot; and &amp;quot;GRUB_GFXMODE=1280×720.&amp;quot;  None of those worked.  I still get the hanging grey bar.  My monitor is 4K.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have some help with this one?&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&lt;p&gt;Kent&lt;/p&gt;&#xA;" OwnerUserId="24587" LastActivityDate="2023-12-23T11:06:40.740" Title="Install hangs with gray rectangle accross screen" Tags="|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26122" PostTypeId="2" ParentId="26121" CreationDate="2020-12-08T03:18:06.510" Score="0" Body="&lt;p&gt;Using nomodeset at boot worked.&lt;/p&gt;&#xA;" OwnerUserId="24587" LastActivityDate="2020-12-08T03:18:06.510" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26123" PostTypeId="2" ParentId="26118" CreationDate="2020-12-08T11:56:34.847" Score="0" Body="&lt;p&gt;you can disable system sound from the sound menu in the settings&#xA;You can also install elementary tweaks to add more settings, if it's what you mean&lt;/p&gt;&#xA;&lt;p&gt;These are the commands to be typed or copied/pasted in your terminal&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22414" LastActivityDate="2020-12-08T11:56:34.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26124" PostTypeId="2" ParentId="4398" CreationDate="2020-12-08T20:13:26.013" Score="0" Body="&lt;p&gt;unfortunately Nov '17 was 3 years ago and these instructions may not work because the packages that are referred to no longer exist in the usual package repositories.&lt;/p&gt;&#xA;" OwnerUserId="24591" LastEditorUserId="24591" LastEditDate="2020-12-08T23:03:06.743" LastActivityDate="2020-12-08T23:03:06.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26125" PostTypeId="2" ParentId="26110" CreationDate="2020-12-09T07:44:30.253" Score="0" Body="&lt;p&gt;With help of @KGIII I've found the answer.&#xA;I needed to login and logout to see the apps in AppCenter. Adding &lt;code&gt;X-GNOME-UsesNotifications=true&lt;/code&gt; in &lt;code&gt;/var/lib/snapd/desktop/applications&lt;/code&gt; allows controlling notifications for snaps separately. The only persisting issue is that they still appear combined in the notification centre.&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2020-12-09T07:44:30.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26127" PostTypeId="1" CreationDate="2020-12-09T19:41:52.587" Score="1" ViewCount="226" Body="&lt;p&gt;Another black screen issue here. I thought I successfully installed Elementary on a mid-2010 iMac (after editing in grub to set nomodeset). It went through the install wizard and asked for my time zone and WiFi details. Then, it asked to reboot.&lt;/p&gt;&#xA;&lt;p&gt;On reboot, I got &lt;strike&gt;two ding&lt;/strike&gt; three ring sounds (not the Mac chime, nor beeps) and a completely black screen. I can’t seem to hold down opt/alt to boot from another drive anymore.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas on how to progress? My guess is that the graphics card driver doesn’t work.&lt;/p&gt;&#xA;&lt;p&gt;If nothing else, I’d like to at least be able to boot from USB and put OS X back on.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;2020-12-11 Update:&lt;/strong&gt; After rebooting by unplugging, then plugging the iMac back in, I was able to get into GRUB by hitting Esc during the Mac chime. I guess I wasn’t properly rebooting.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://vimeo.com/489452378&quot; rel=&quot;nofollow noreferrer&quot;&gt;Those ringing sounds from the video&lt;/a&gt; were actually ElementaryOS sounds! They’re the sound it makes when it picks up a wifi printer.&lt;/p&gt;&#xA;&lt;p&gt;Now I have a problem with not being able to boot without recovery mode. Normal booting still takes me to a blank screen. However, if I go to GRUB during boot, pick recovery mode, then select Resume from there, it reboots in such a way that I actually get into a working instance of ElementaryOS! But if I reboot again from there, I go back to a black screen.&lt;/p&gt;&#xA;&lt;p&gt;What’s the difference from a normal startup or reboot and a recovery mode reboot? How can I get normal startup to behave like the recovery mode reboot?&lt;/p&gt;&#xA;" OwnerUserId="24601" LastEditorUserId="24601" LastEditDate="2020-12-12T02:20:43.667" LastActivityDate="2023-08-16T11:46:44.673" Title="Black screen after successful (?) install" Tags="|boot|install|black-screen|apple|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="26128" PostTypeId="1" CreationDate="2020-12-10T01:53:57.457" Score="1" ViewCount="213" Body="&lt;p&gt;Novice here.&lt;/p&gt;&#xA;&lt;p&gt;Trying to install Elementary OS 5.1 Hera from usb on Macbook Pro 2010.&lt;/p&gt;&#xA;&lt;p&gt;I get the normal screen showing the bootable drive after powering on and holding the option key. I get the Elementary OS splash screen. After that the screen goes black. The screen begins to brighten with a weird splotchy white with horizontal black lines. This happens until the screen is bright white and then goes black. I can't get it to do anything else.&lt;/p&gt;&#xA;&lt;p&gt;Like I said, I'm a novice, but I have successfully installed Elementary OS on a 2009 Mac Min and a very old Dell laptop. Just not sure what to do here.&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="24602" LastActivityDate="2023-12-29T06:00:50.073" Title="2010 Macbook Pro installation issues" Tags="|release-hera|system-installation|macbook|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26129" PostTypeId="2" ParentId="22720" CreationDate="2020-12-10T01:57:24.910" Score="0" Body="&lt;p&gt;On KDE, you would need a package called kio-afc which should add the functionality to dolphin. But I prefer to have it working out of the box like here on elementary os.&lt;/p&gt;&#xA;" OwnerUserId="24603" LastActivityDate="2020-12-10T01:57:24.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26130" PostTypeId="1" CreationDate="2020-12-10T08:44:46.617" Score="0" ViewCount="129" Body="&lt;p&gt;I am using Slack from snaps and Firefox from AppCenter (non-curated).&#xA;I made Firefox my default browser.&#xA;When I click a link in Slack it opens in Firefox but there are three problems.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;It doesn't open in an active window but creates a new one&lt;/li&gt;&#xA;&lt;li&gt;The new window has a strange thick black shadow [1]&lt;/li&gt;&#xA;&lt;li&gt;The new window doesn't share cookies so I am logged out of everything and I have zero extensions so I can't even use my password manager.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;[1] Shadow screenshot &lt;a href=&quot;https://i.stack.imgur.com/T1kEM.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/T1kEM.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I actually don't mind the shadow or separate window that much. But I'd love to open the links in an instance of Firefox where I am already logged into various services.&lt;/p&gt;&#xA;&lt;p&gt;How can I open the links in an instance that has all my cookies and is logged into everything?&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2023-12-26T05:00:20.043" Title="How to open links from Slack in existing Firefox window" Tags="|software-installation|web-browser|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26131" PostTypeId="2" ParentId="26130" CreationDate="2020-12-10T11:03:14.307" Score="0" Body="&lt;p&gt;I've found that the problem was Slack from Snap. When I installed both Slack and Firefox via AppCenter as non curated apps, it works normally. Something is not working between different stores.&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2020-12-10T11:03:14.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26132" PostTypeId="2" ParentId="2648" CreationDate="2020-12-10T12:19:28.353" Score="0" Body="&lt;p&gt;If you have problems with disconnection, I would solve it by changing the DNS and placing the google ones by editing the resolv.conf file with the following command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/resolv.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;once inside, they change the &amp;quot;nameserver&amp;quot; and place 8.8.8.8 below another line that says the same but with 8.8.4.4&lt;/p&gt;&#xA;&lt;p&gt;It would look like this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Nameserver 8.8.8.8&#xA;Nameserver 8.8.4.4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Si tienen problemas con desconeccion yo lo solucione cambiando la DNS y colocando las de google editando el archivo resolv.conf con el siguiente comando&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano/etc/resolv.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;una vez dentro, cambian el &amp;quot;nameserver&amp;quot; y colocan 8.8.8.8&#xA;abajo otra linea que diga lo mismo pero con 8.8.4.4&lt;/p&gt;&#xA;&lt;p&gt;Quedaria asi&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Nameserver 8.8.8.8&#xA;Nameserver 8.8.4.4&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;No se si les sirva, tengo pereza de escribirlo en ingles haha (Use Google Transator) Saludos :)&lt;/p&gt;&#xA;" OwnerUserId="24606" LastEditorUserId="26" LastEditDate="2020-12-13T03:13:10.137" LastActivityDate="2020-12-13T03:13:10.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26133" PostTypeId="1" AcceptedAnswerId="26136" CreationDate="2020-12-10T13:04:54.470" Score="2" ViewCount="82" Body="&lt;p&gt;I am trying to install version 5.1 of JabRef (ElementaryOS brings 3.8.2) in my system. Up to now I have tried two methods:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install the deb from jabref webpage. In this case, I can open jabref but it is unresponsive (menu options do not work).&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;snap install jabref&lt;/code&gt;. In this case I get an exception an the program closes when I click in a menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Any idea on how to do it?&lt;/p&gt;&#xA;" OwnerUserId="24605" LastActivityDate="2021-02-05T09:08:07.577" Title="Installing JabRef 5 in ElementaryOS" Tags="|thirdpartyapps|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26135" PostTypeId="2" ParentId="26133" CreationDate="2020-12-10T14:45:47.583" Score="0" Body="&lt;p&gt;The best/easy way to install deb files is to use the Eddy app from the AppCenter &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://appcenter.elementary.io/com.github.donadigo.eddy/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can also use the Terminal:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg -i package_name.deb&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2020-12-10T14:45:47.583" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26136" PostTypeId="2" ParentId="26133" CreationDate="2020-12-10T16:57:39.923" Score="2" Body="&lt;p&gt;I finally got it working. In my case the solution was forcing JabRef to use GTK2 instead of GTK3. Here are the steps:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download and install the .deb with &lt;code&gt;sudo dpkg -i jabref_5.1-1_amd64.deb&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Fix dependencies if neccesary &lt;code&gt;sudo apt-get install -f&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Locate the file &lt;code&gt;JabRef.cfg&lt;/code&gt;. In my case it was in &lt;code&gt;/opt/jabref/lib/app&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Modify this file and add in the [Java Options] section &lt;code&gt;-Djdk.gtk.version=2&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;After that JabRef started working flawlessly.&lt;/p&gt;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&lt;p&gt;After I updated to JabRef 5.2, the problem came back. After consulting with JabRef developers in  &lt;a href=&quot;https://github.com/JabRef/jabref/issues/7394#issuecomment-770053469&quot; rel=&quot;nofollow noreferrer&quot;&gt;github&lt;/a&gt;, I had to use this other workaround:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Modify the file &lt;code&gt;/opt/jabref/lib/runtime/bin/JabRef&lt;/code&gt; and add the &lt;code&gt;-Djdk.gtk.version=2&lt;/code&gt; modifier. Something like this: &lt;code&gt;&amp;quot;$DIR/java&amp;quot;  -p &amp;quot;$DIR/../app&amp;quot; -Djdk.gtk.version=2  -m org.jabref/org.jabref.gui.JabRefLauncher  &amp;quot;$@&amp;quot;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Modify the launcher so it points to this file. For that I installed &lt;code&gt;menulibre&lt;/code&gt; (&lt;code&gt;sudo apt-get install menulibre&lt;/code&gt;) and I modified JabRef entry to point to &lt;code&gt;/opt/jabref/lib/runtime/bin/JabRef&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="24605" LastEditorUserId="24605" LastEditDate="2021-02-05T09:08:07.577" LastActivityDate="2021-02-05T09:08:07.577" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26139" PostTypeId="2" ParentId="683" CreationDate="2020-12-10T19:40:57.720" Score="0" Body="&lt;p&gt;You can open a terminal and type (be aware of update user with your username before executing the command):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo adduser user audio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot your system and done!&lt;/p&gt;&#xA;" OwnerUserId="24612" LastActivityDate="2020-12-10T19:40:57.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26140" PostTypeId="2" ParentId="4095" CreationDate="2020-12-10T19:46:59.370" Score="0" Body="&lt;p&gt;You can open a terminal and type (be aware of update user with your username before executing the command):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo adduser user audio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot your system and done!&lt;/p&gt;&#xA;" OwnerUserId="24612" LastActivityDate="2020-12-10T19:46:59.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26142" PostTypeId="1" CreationDate="2020-12-12T07:59:51.237" Score="0" ViewCount="119" Body="&lt;p&gt;When i change nvidia-settings(with sudo) resolution from 1920x1080 to 2560x1440 on the advanced tab and click apply, it all works good, when i press save configurations it saves them into /etc/X11/xorg.conf when i open this file from the terminal it seems all updated correctly.&lt;/p&gt;&#xA;&lt;p&gt;After rebooting everything resets, all the solutions found on internet about mint or other distros doesn't work for me&lt;/p&gt;&#xA;" OwnerUserId="24622" LastActivityDate="2020-12-12T07:59:51.237" Title="Problem nvidia-settings not saving resolution change after restarting" Tags="|nvidia|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26143" PostTypeId="1" CreationDate="2020-12-12T14:17:52.653" Score="0" ViewCount="47" Body="&lt;p&gt;elementaryos 5.1.4 Hera is based on ubuntu bionic (18.04) which contains zfsutils-linux at version 0.7.5.&lt;/p&gt;&#xA;&lt;p&gt;However I need version 0.8.0+ which introduces encryption. What is the proper way, to install install a single package which is not in the default repository?&lt;/p&gt;&#xA;&lt;p&gt;E.g. which is the proper repository url to add for Ubuntu 20.04? And how do I install only this specific package from the newer repository?&lt;/p&gt;&#xA;&lt;p&gt;Or would you recommend simply installing from source/binary directly from ZFS?&lt;/p&gt;&#xA;" OwnerUserId="24625" LastEditorUserId="24625" LastEditDate="2020-12-14T16:03:58.230" LastActivityDate="2020-12-14T16:03:58.230" Title="How do I install a newer version of a package on elementary-os?" Tags="|package-management|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26146" PostTypeId="2" ParentId="26128" CreationDate="2020-12-13T22:46:30.490" Score="0" Body="&lt;p&gt;The solution is to add &lt;code&gt;nomodeset&lt;/code&gt; to GRUB's boot parameters. You can do this by the advanced options during the initial boot process easily enough. Just add it after, or replace it with, &amp;quot;quiet splash&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;If you have to add it to your system permanently then:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano sudo /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Scroll down to where you see &amp;quot;quiet splash&amp;quot; and add &amp;quot;nomodeset&amp;quot; next to it, while still between the quotes. If you want, you can remove quiet splash and see the boot process, but you can just add nomodeset and leave quiet splash there.&lt;/p&gt;&#xA;&lt;p&gt;When you're done, you need to save it and then you need to tell the OS that it has changed. To do that, it's:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That should do it.&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-12-13T22:46:30.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26149" PostTypeId="2" ParentId="26114" CreationDate="2020-12-14T11:16:40.483" Score="0" Body="&lt;p&gt;This is answered in the &lt;a href=&quot;https://docs.elementary.io/develop/appcenter/publishing-requirements&quot; rel=&quot;nofollow noreferrer&quot;&gt;Developer Documentation&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Your app may be written in any language, but the front-end must be a native Gtk3 app. Web, Electron, Qt, Java, and other non-native app front-ends will be rejected during the review process. A game may be excepted from this requirement so long as it uses native window decorations and is generally usable on both loDPI and HiDPI displays.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-12-14T11:16:40.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26150" PostTypeId="2" ParentId="26120" CreationDate="2020-12-14T15:52:43.233" Score="0" Body="&lt;p&gt;This is your icon themes representation of a &amp;quot;missing icon&amp;quot;. The theme does not provide the icons required for those items in the sidebar, so it displays that instead.&lt;/p&gt;&#xA;&lt;p&gt;As you have found from the comments under your question, changing to an icon theme that provides those icons fixes the issue.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-12-14T15:52:43.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26151" PostTypeId="2" ParentId="26111" CreationDate="2020-12-14T15:57:11.043" Score="1" Body="&lt;p&gt;You are adding the &lt;code&gt;stack&lt;/code&gt; to the window:&#xA;&lt;a href=&quot;https://github.com/Suzie97/Project_X97/blob/4506489bbe5d79343728e6259d614dacc4b2036d/Project_X97/src/Window.vala#L64&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Suzie97/Project_X97/blob/4506489bbe5d79343728e6259d614dacc4b2036d/Project_X97/src/Window.vala#L64&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You are then constructing an object called &lt;code&gt;grid&lt;/code&gt; that you're packing the StackSidebar into, but then the grid doesn't get added to the window.&lt;/p&gt;&#xA;&lt;p&gt;So you probably need &lt;code&gt;add (grid)&lt;/code&gt; instead.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastEditorUserId="9699" LastEditDate="2020-12-16T10:27:20.457" LastActivityDate="2020-12-16T10:27:20.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26153" PostTypeId="1" AcceptedAnswerId="26154" CreationDate="2020-12-15T03:19:16.033" Score="3" ViewCount="635" Body="&lt;p&gt;I have Elementary OS 5.1 Hera, and I would like to use &lt;a href=&quot;https://help.ubuntu.com/community/PPA&quot; rel=&quot;nofollow noreferrer&quot;&gt;PPAs&lt;/a&gt;. That way, I can install some more software not in the default repositories. How can I do this?&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-12-15T13:07:19.277" Title="How do I use PPAs with Elementary OS?" Tags="|ppa|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26154" PostTypeId="2" ParentId="26153" CreationDate="2020-12-15T03:19:16.033" Score="2" Body="&lt;p&gt;Elementary, like Debian and some other Debian derivatives, doesn't support PPAs out of the box. In order to use them, you'll have to install &lt;code&gt;software-properties-common&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Open your terminal with CTRL + ALT + T and simply enter the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once you've done that, you can add PPAs in the normal way. For example, this is a LibreOffice PPA:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:libreoffice/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-12-15T03:19:16.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26155" PostTypeId="2" ParentId="26153" CreationDate="2020-12-15T13:07:19.277" Score="2" Body="&lt;p&gt;Where possible, it's recommended to not use PPAs at all. Adding a PPA is essentially giving the owner of the PPA root (administrator) level access to your system. It is possible for them to maliciously or accidentially replace system packages with broken/unpatched/malicious versions.&lt;/p&gt;&#xA;&lt;p&gt;PPAs by trusted vendors are probably fine (Ubuntu, Libreoffice, etc), however, always be aware they run the risk of breaking your system if they are misconfigured.&lt;/p&gt;&#xA;&lt;p&gt;If the software you want is available from &lt;a href=&quot;https://flathub.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;flathub.org&lt;/a&gt;, then I would recommend getting it from there instead as Flatpak is a much more safe and secure packaging format.&lt;/p&gt;&#xA;" OwnerUserId="9699" LastActivityDate="2020-12-15T13:07:19.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26156" PostTypeId="1" AcceptedAnswerId="26178" CreationDate="2020-12-16T07:06:34.520" Score="0" ViewCount="140" Body="&lt;p&gt;I did &lt;code&gt;sudo apt autoremove&lt;/code&gt; on the terminal, and it has removed by elementary desktop.&lt;/p&gt;&#xA;&lt;p&gt;I tried doing &lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt;, and the terminal says some unable to find some packages, use &lt;code&gt;sudo apt update&lt;/code&gt; or try &lt;code&gt;--fix-missing&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo apt-get update --fix-missing&lt;/code&gt;, but it did not work, I also tried &lt;code&gt;sudo dpkg --configure -a&lt;/code&gt;, but it didn't fix the problem.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-12-19T13:28:08.887" Title="Elementary OS GUI is deleted" Tags="|updates|desktop|gala|repositories|desktop-environment|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26158" PostTypeId="1" CreationDate="2020-12-16T08:49:26.180" Score="0" ViewCount="79" Body="&lt;p&gt;I noticed that I am not able to move apps' windows to the next workspace if there is just 1 app running in my current workspace.&#xA;It's not a big issue, since, normally I'd want to move apps to another workspace only if it is cluttered with too many apps.&#xA;However, sometimes I just know that I want to launch 3 apps, and each one will be in its own space. I launch the first app, I try to move it to far right workspace, because that's where I want this app to reside. I can't, because it's the only app I have currently, and OS will not allow me to move it yet. I need to open another app first. That slows me down a bit.&lt;/p&gt;&#xA;" OwnerUserId="24367" LastActivityDate="2020-12-16T08:49:26.180" Title="Moving a window to another workspace works only when at least 2 apps are open - why?" Tags="|applications|keyboard-shortcuts|workspace|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26160" PostTypeId="2" ParentId="15401" CreationDate="2020-12-16T09:27:48.267" Score="0" Body="&lt;p&gt;Für 3 Komponenten sind Updates verfügbar:&#xA;• libowncloudsync0 the ownCloud sync library Version: 2.7.3+oc-2877&#xA;• owncloud-client-doc development files for the ownCloud sync lib Version: 2.7.3+oc-2877&#xA;• owncloud-client-l10n Internationalization files for ownCloud Version: 2.7.3+oc-2877&lt;/p&gt;&#xA;" OwnerUserId="24040" LastActivityDate="2020-12-16T09:27:48.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26161" PostTypeId="2" ParentId="2992" CreationDate="2020-12-16T16:09:47.787" Score="0" Body="&lt;p&gt;To install &lt;code&gt;system-config-printers&lt;/code&gt; on elementary OS 5.1.7 Hera&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt install print-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23468" LastActivityDate="2020-12-16T16:09:47.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26162" PostTypeId="2" ParentId="25745" CreationDate="2020-12-16T19:22:01.033" Score="0" Body="&lt;p&gt;Yes, it was a Firefox &lt;a href=&quot;https://bugzilla.mozilla.org/show_bug.cgi?id=1666839&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue&lt;/a&gt;. Fixed in Firefox &lt;code&gt;85.0&lt;/code&gt;, current stable release &lt;code&gt;84.0&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Hehng.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Hehng.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18392" LastActivityDate="2020-12-16T19:22:01.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26163" PostTypeId="1" CreationDate="2020-12-16T20:00:27.863" Score="0" ViewCount="14" Body="&lt;p&gt;Normally, I close the tabs using CTRL+W. In Terminal, that does not work. Instead, I have to use CTRL+SHIFT+W. Why is that? Can I change it to CTRL+W?&lt;/p&gt;&#xA;" OwnerUserId="24367" LastActivityDate="2020-12-18T12:20:11.537" Title="Terminal - closing a tab has a different shortcut than the rest of apps" Tags="|keyboard-shortcuts|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26164" PostTypeId="1" CreationDate="2020-12-16T20:25:26.677" Score="1" ViewCount="55" Body="&lt;p&gt;I'm asking this in hopes someone here has gotten their RPi4 working with eOS. I was able to get it going with 18.04 server, USB boot and WiFi. eOS installed and runs great!&lt;/p&gt;&#xA;&lt;p&gt;I only have (now) one issue.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;AppCenter will not show non-free apps.&lt;/strong&gt; Monitor and AppEditor are the two that come to mind. I was able to build the latter from github, but its an overall issue.&lt;/p&gt;&#xA;&lt;p&gt;I feel like this is something simple I overlooked. Not looking for a hand out and I realize it's not &amp;quot;stock&amp;quot;, but any advice would be appreciated.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&lt;p&gt;edit - sound fixed with &lt;code&gt;dtparam=audio=on&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;edit - wifi fixed by commenting out the info added to &lt;code&gt;50-cloud-init.yaml&lt;/code&gt; so ubuntu server could get online.&lt;/p&gt;&#xA;" OwnerUserId="24644" LastEditorUserId="26" LastEditDate="2020-12-30T19:34:20.247" LastActivityDate="2020-12-30T19:34:20.247" Title="AppCenter will not show non-free apps on Raspberry Pi 4" Tags="|release-hera|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26165" PostTypeId="1" CreationDate="2020-12-16T20:46:53.890" Score="0" ViewCount="51" Body="&lt;p&gt;I have 2 VMs, one I can change the font using elementary-tweaks and works great. The font is instantly available in terminal.  The other, I change the font in the same way and nothing happens. I close the terminal and reopen and also rebooted the VM and the font is not changed. Both are same elementary os latest version with all updates. No error message.  Where could I look to see where the problem could be.  Both VMs have the same packages installed. Hera V5.1.7.&lt;/p&gt;&#xA;" OwnerUserId="24645" LastActivityDate="2024-01-02T19:05:40.670" Title="change font for io.elementary.terminal to cascadia code fails" Tags="|release-hera|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26168" PostTypeId="2" ParentId="22436" CreationDate="2020-12-17T06:02:34.267" Score="0" Body="&lt;p&gt;Step 1.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install org.freedesktop.Platform/x86_64/19.08&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Step 2.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak uninstall --unused&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Step 3.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;NOTE: in the latest step maybe the system update some packages and ask for download what you need and YES. After update the new packages run again flatpak update&lt;/p&gt;&#xA;&lt;p&gt;Then reboot.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;OR&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak repair&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24650" LastEditorUserId="26" LastEditDate="2020-12-30T19:04:43.707" LastActivityDate="2020-12-30T19:04:43.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26169" PostTypeId="1" CreationDate="2020-12-17T18:45:26.307" Score="1" ViewCount="101" Body="&lt;p&gt;I have downloaded the .iso file several times and followed the directions for verifying the download, but when I enter the command: &amp;quot;sha256sum elementaryos-5.1-stable.202002814.iso&amp;quot; Then I get: &amp;quot;sha256sum elementaryos-5.1-stable.20200814: No such file or directory&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="24657" LastActivityDate="2020-12-17T18:45:26.307" Title="Why can't I verify the download of elementary OS?" Tags="|download|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26170" PostTypeId="2" ParentId="25929" CreationDate="2020-12-18T06:30:07.157" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1284878/intel-wifi-ax200-msi-x570-unclaimed-driver&quot;&gt;https://askubuntu.com/questions/1284878/intel-wifi-ax200-msi-x570-unclaimed-driver&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Disable Fast Startup on Windows 10. Works like a charm now.&lt;/p&gt;&#xA;&lt;p&gt;This was so annoying! -_-&lt;/p&gt;&#xA;" OwnerUserId="24120" LastActivityDate="2020-12-18T06:30:07.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26172" PostTypeId="1" CreationDate="2020-12-18T10:41:40.303" Score="0" ViewCount="141" Body="&lt;p&gt;Hello respected community and developers. First, I want to express my gratitude for your work.&#xA;I am interested in the program for text and code editing - Code.&#xA;I would like to ask about its differences from others, what are its advantages and disadvantages?&#xA;Where can I read documentation about the program?&#xA;Is there telemetry in the program?&#xA;Would be a good choice if I want to completely switch to writing code and scripts in it?&#xA;Will there be any problems when installing this program in other distributions?&#xA;Thank you very much!&lt;/p&gt;&#xA;" OwnerUserId="24342" LastActivityDate="2020-12-18T10:41:40.303" Title="Advantages and disadvantages of the program Code. Documentation on features and differences from others" Tags="|code|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26173" PostTypeId="1" CreationDate="2020-12-18T11:41:52.427" Score="0" ViewCount="23" Body="&lt;p&gt;I am writing an application that depends on &lt;a href=&quot;https://valadoc.org/gcrypt/GCrypt.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;GCrypt&lt;/a&gt;, which is a C library. Its development headers can be found in Ubuntu repos in the &lt;code&gt;libgcrypt20-dev&lt;/code&gt; package (or the older &lt;code&gt;libgcrypt11-dev&lt;/code&gt;).&lt;/p&gt;&#xA;&lt;p&gt;Running a meson build locally works correctly, but on Houston, it fails with the following error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson.build:36:0: ERROR:  C library 'libgcrypt' not found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried specifying both these packages in the .travis.yml file so that it builds (and it does indeed install those packages) but the same error occurs in all scenarios.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://travis-ci.com/github/elfenware/obliviate/builds/209559518&quot; rel=&quot;nofollow noreferrer&quot;&gt;Complete log&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elfenware/obliviate/blob/main/.travis.yml&quot; rel=&quot;nofollow noreferrer&quot;&gt;.travis.yml&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elfenware/obliviate/blob/main/meson.build&quot; rel=&quot;nofollow noreferrer&quot;&gt;meson.build&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;How can I fix this error?&lt;/p&gt;&#xA;" OwnerUserId="6617" LastEditorUserId="6617" LastEditDate="2020-12-18T11:49:13.703" LastActivityDate="2024-01-04T13:00:30.050" Title="How to specify a C library dependency for Houston?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26174" PostTypeId="2" ParentId="26165" CreationDate="2020-12-18T12:11:03.280" Score="0" Body="&lt;p&gt;Try setting it by directly editing the GSettings key:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set io.elementary.terminal.settings font 'Cascadia Code 14'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(Or &lt;code&gt;CascadiaCode&lt;/code&gt; or &lt;code&gt;cascadia code&lt;/code&gt;: see the installed font name.)&lt;/p&gt;&#xA;&lt;p&gt;Also check in the built-in Font Viewer that the font is installed correctly.&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2020-12-18T12:11:03.280" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26175" PostTypeId="2" ParentId="26163" CreationDate="2020-12-18T12:20:11.537" Score="1" Body="&lt;p&gt;This is because in the shell itself, Ctrl+W deletes the previous word. Tying this to an application action will cause a conflict.&lt;/p&gt;&#xA;&lt;p&gt;I understand that the elementary Team has enabled Ctrl+C for copy, despite it conflicting with a shell action. But that is because it's easy to tell whether some text is selected (so copy it) or not (so cancel the current running command).&lt;/p&gt;&#xA;&lt;p&gt;However, the same cannot work for Ctrl+W. There's no way to tell whether you mean to close the tab or delete the word.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Murky waters:&lt;/strong&gt; That said, you should be able to compile a version of Terminal with your preferred shortcut, if you're sure you will never use Ctrl+W to delete words. (Haven't tested; take it with a pinch of salt.)&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2020-12-18T12:20:11.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26178" PostTypeId="2" ParentId="26156" CreationDate="2020-12-19T13:28:08.887" Score="0" Body="&lt;p&gt;I had timeshit installed on my PC, so I restored my system to a previous snapshot from the command line.&lt;/p&gt;&#xA;&lt;p&gt;The desktop environment is reinstalled now.&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2020-12-19T13:28:08.887" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26179" PostTypeId="1" CreationDate="2020-12-19T17:40:56.743" Score="0" ViewCount="180" Body="&lt;p&gt;I'm using Elementary OS 5.1.7 Hera on a Toshiba laptop.&#xA;Since the couple of days,I've been using Eos for very long periods(~10-12 hours) straight. So,when I'm not using the laptop,I'll simply put it on suspend. After doing this(putting the OS on suspend and turning it back on again) for about 4-5 times,the OS seems very slow. The animations and other operations won't work smoothly, and I'll have to restart the PC. Any Ideas?&lt;/p&gt;&#xA;&lt;p&gt;P.S:I'm always suspending my PC because I've got some files and web pages open which I don't want to start again from the beginning.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastActivityDate="2020-12-19T17:40:56.743" Title="Elementary OS becoming very slow on long usage" Tags="|release-hera|suspend|power|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="26180" PostTypeId="1" CreationDate="2020-12-19T18:10:19.447" Score="2" ViewCount="43" Body="&lt;p&gt;When I installed elementary OS I also created a SWAP partition. &lt;br&gt;&#xA;I'm a front end developer so at any moment I have a lot of chrome tabs open, I have just 6 gigs of memory in my laptop(Its soldered so can't really upgrade).&#xA;It seems that elementary OS is just removing tabs from memory instead of moving them to the swap.&#xA;I assume this because whenever I run &lt;code&gt;grep Swap /proc/meminfo&lt;/code&gt;  it just gives output something like this . &lt;br&gt;&#xA;&lt;code&gt;sarthak@envy:~$ grep Swap /proc/meminfo SwapCached:            8 kB  SwapTotal:       8056828 kB SwapFree:        8031228 kB &lt;/code&gt;&lt;/p&gt;&#xA;&lt;br&gt;&#xA;Is there anything I can do about this?&#xA;" OwnerUserId="24384" LastActivityDate="2020-12-19T18:10:19.447" Title="Elementary OS clearing RAM instead of saving it to SWAP Partition" Tags="|google-chrome|swap|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26181" PostTypeId="1" CreationDate="2020-12-19T19:27:23.920" Score="0" ViewCount="211" Body="&lt;p&gt;I'm trying to try the Odin demo mode but when I connect to the internet, the system asks me for the password. Could someone please pass it to me? Thank you&lt;/p&gt;&#xA;" OwnerUserId="24676" LastActivityDate="2020-12-20T04:41:04.493" Title="root password demo mode Odin" Tags="|security|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26183" PostTypeId="2" ParentId="26173" CreationDate="2020-12-20T06:51:16.657" Score="0" Body="&lt;p&gt;Solved by specifying the dependency in debian/control file instead of .travis.yml:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Build-Depends: debhelper (&amp;gt;= 10.5.1),&#xA;               gettext,&#xA;               libgtk-3-dev (&amp;gt;= 3.10),&#xA;               libgranite-dev,&#xA;               libgcrypt20-dev,&#xA;               meson,&#xA;               valac (&amp;gt;= 0.28.0)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(Thanks, David)&lt;/p&gt;&#xA;" OwnerUserId="6617" LastActivityDate="2020-12-20T06:51:16.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26185" PostTypeId="1" CreationDate="2020-12-20T12:03:29.017" Score="2" ViewCount="128" Body="&lt;p&gt;Bluetooth is dead.&lt;/p&gt;&#xA;&lt;p&gt;Yesterday it worked, today it's not.&lt;/p&gt;&#xA;&lt;p&gt;I checked common points like:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;systemctl restart bluetooth&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;cat /etc/bluetooth/main.con ....&lt;strong&gt;AutoEnable=true&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;rfkill&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;ID TYPE      DEVICE      SOFT      HARD&lt;/p&gt;&#xA;&lt;p&gt;0 bluetooth hci0   unblocked unblocked&lt;/p&gt;&#xA;&lt;p&gt;MX-Master Mouse works on my other PC's/Distros.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions?&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="22859" LastActivityDate="2024-01-10T01:01:45.193" Title="Bluetooth stopped working - HERA" Tags="|bluetooth|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26187" PostTypeId="1" CreationDate="2020-12-21T07:11:17.287" Score="0" ViewCount="277" Body="&lt;p&gt;I often incur the issue that the Wifi connections are not shown. Neither is the WIfi functionality displayed in settings (see photos attached to this post).&lt;/p&gt;&#xA;&lt;p&gt;This occurs every 3-5 boots, and rebooting always fixes the problem. However, how can I avoid this problem in the first place?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mYvJa.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mYvJa.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qsHx6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qsHx6.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24685" LastActivityDate="2020-12-23T01:14:29.197" Title="Elementary OS Wifi not available" Tags="|settings|boot|wifi|networking|error|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26189" PostTypeId="1" CreationDate="2020-12-22T08:36:15.820" Score="0" ViewCount="61" Body="&lt;p&gt;since my last restart of my laptop I'm missing all Elementary icons. I'm using eOS 6.&lt;/p&gt;&#xA;&lt;p&gt;I haven't changed anything, the only thing I'm doing regulary is installing updates from AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;Is there anyway to reset the icons?&lt;/p&gt;&#xA;" OwnerUserId="17315" LastActivityDate="2020-12-22T08:36:15.820" Title="Icons Missing after update" Tags="|icons|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26190" PostTypeId="1" CreationDate="2020-12-22T16:04:37.677" Score="0" ViewCount="26" Body="&lt;p&gt;I am searching for an app that allows easily annotating pictures (mainly screenshots).&#xA;I've tried shutter but editing feature requires adding a package that is not in apt and I gave up.&#xA;Then I tried Flameshot and it looked like it has all the things I need but it can't save files. (they should appear under ~/Pictures/Screenshots but they don't).&lt;/p&gt;&#xA;&lt;p&gt;I am wondering if maybe there is a curated app that allows drawing circles and adding text to images?&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2020-12-22T16:04:37.677" Title="App that allows adding lines boxes and text on top of images" Tags="|applications|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26192" PostTypeId="1" CreationDate="2020-12-23T08:56:29.037" Score="0" ViewCount="30" Body="&lt;p&gt;App Center shows me that 3 components can be updated:&lt;/p&gt;&#xA;&lt;p&gt;• libowncloudsync0 the ownCloud sync library Version: 2.7.4+oc-2934&#xA;• owncloud-client-doc development files for the ownCloud sync lib Version: 2.7.4+oc-2934&#xA;• owncloud-client-l10n Internationalization files for ownCloud Version: 2.7.4+oc-2934&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately this doesn't work through the App Center.&lt;/p&gt;&#xA;&lt;p&gt;When I call up&lt;/p&gt;&#xA;&lt;p&gt;apt list --upgradable&lt;/p&gt;&#xA;&lt;p&gt;in the terminal, I see&lt;/p&gt;&#xA;&lt;p&gt;libowncloudsync0/unbekannt 2.7.4+oc-2934 amd64 [aktualisierbar von: 2.4.1+dfsg-1]&#xA;owncloud-client-doc/unbekannt 2.7.4+oc-2934 all [aktualisierbar von: 2.4.1+dfsg-1]&#xA;owncloud-client-l10n/unbekannt 2.7.4+oc-2934 all [aktualisierbar von: 2.4.1+dfsg-1]&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately, since I tried to update, the ownCloud program has also disappeared from the list of my installed programs.&lt;/p&gt;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="24040" LastActivityDate="2024-01-22T13:04:10.450" Title="Own Cloud Client update" Tags="|updates|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26193" PostTypeId="2" ParentId="26192" CreationDate="2020-12-23T09:48:14.020" Score="0" Body="&lt;p&gt;I'm on the trail.&lt;/p&gt;&#xA;&lt;p&gt;I think I had ownCloud installed as a snapt.&lt;/p&gt;&#xA;&lt;p&gt;Now that I have installed the Snapt Store as a Snapt app, ownCloud is displayed as installed there.&lt;/p&gt;&#xA;&lt;p&gt;Since I don't need the program (rather NextCloud) I uninstalled it there.&lt;/p&gt;&#xA;&lt;p&gt;However, the three components that need to be updated are still displayed in the AppCenter. :-(&lt;/p&gt;&#xA;" OwnerUserId="24040" LastActivityDate="2020-12-23T09:48:14.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26197" PostTypeId="1" AcceptedAnswerId="26198" CreationDate="2020-12-23T16:56:01.760" Score="0" ViewCount="708" Body="&lt;p&gt;For a project, I need a better graphics card. The iGPU of my Dell XPS 13, which is an Intel UHD 620, is not sufficiently strong. I don't want to sell my laptop, because aside from the GPU, it's more than powerful enough (4 x i7, 16 GB RAM, 512 GB SSD). It also has two Thunderbolt 3 ports, so an eGPU is the most obvious solution. But there is not a lot of information to find about how to set it up.&lt;/p&gt;&#xA;&lt;p&gt;So, how hard is it, if at all possible, to use an eGPU with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="12375" LastActivityDate="2021-01-24T15:03:38.307" Title="Can I use an eGPU with elementary OS and if so, how do I set it up?" Tags="|nvidia|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26198" PostTypeId="2" ParentId="26197" CreationDate="2020-12-23T16:56:01.760" Score="2" Body="&lt;h3&gt;TLDR;&lt;/h3&gt;&#xA;&lt;p&gt;YES, it is possible. And NO it's not hard at all.&lt;/p&gt;&#xA;&lt;h3&gt;My setup&lt;/h3&gt;&#xA;&lt;p&gt;I'm using a DELL XPS 13 (9370), which has two Thunderbolt 3 ports. For the eGPU enclosure, I went with a Razer Core X, which is &lt;a href=&quot;https://egpu.io/best-egpu-buyers-guide/&quot; rel=&quot;nofollow noreferrer&quot;&gt;ranked as the best option on egpu.io&lt;/a&gt;. Finally, the card I'm using is the modest AMD RX 580. I chose AMD because it works out of the box, no additional drivers required.&lt;/p&gt;&#xA;&lt;h3&gt;A word about cables&lt;/h3&gt;&#xA;&lt;p&gt;Do yourself a favour and don't try to save on cables. You won't regret spending the extra buck. For the Thunderbolt cable, make sure you buy an active, 40 Gbps TB 3 cable. To connect the eGPU to the display, a 4K@60Hz Display Port cable is preferable if your monitor supports DP of course. My cables are 2 metres long, plenty to be able to keep the enclosure out of sight (it's huge).&lt;/p&gt;&#xA;&lt;h3&gt;Required software&lt;/h3&gt;&#xA;&lt;p&gt;First, you'll need bolt to authorize the Thunderbolt connection. It's is shipped by default with Ubuntu, but not with elementary OS:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install bolt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, you'll also need some script to manage GPU switching. You can do this by hand, but it's easy to make mistakes. I found &lt;a href=&quot;https://github.com/hertg/egpu-switcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;egpu-switcher&lt;/a&gt; easy to use. It's actively maintained and well supported.&lt;/p&gt;&#xA;&lt;p&gt;To install it, you'll need to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/26153/how-do-i-use-ppas-with-elementary-os&quot;&gt;be able to add PPAs first&lt;/a&gt;, which is not enabled on elementary OS by default (thanks to @KGIII for pointing that out). Enabling PPAs can be done by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then you can go ahead and run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo add-apt-repository ppa:hertg/egpu-switcher&#xA;$ sudo apt update&#xA;$ sudo apt install egpu-switcher&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Setting up Thunderbolt&lt;/h3&gt;&#xA;&lt;p&gt;In your laptop's BIOS settings, enable pre-Boot ACL in the Thunderbolt settings. Also, make sure security is set to User. More details about why and how can be found in the &lt;a href=&quot;https://github.com/hertg/egpu-switcher/blob/master/TROUBLESHOOT.md#tips&quot; rel=&quot;nofollow noreferrer&quot;&gt;troubleshooting section&lt;/a&gt; of the egpu-switcher library.&lt;/p&gt;&#xA;&lt;p&gt;Next, connect your eGPU and boot up your laptop. Run &lt;code&gt;boltctl list&lt;/code&gt; to get the UUID of the TB device and then authorize it by running &lt;code&gt;sudo boltctl authorize [UUID]&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;h3&gt;Switching GPU's&lt;/h3&gt;&#xA;&lt;p&gt;Let the script generate the necessary files:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo egpu-switcher setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then to configure your available GPU's, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo egpu-switcher config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When prompted with &lt;code&gt;Would you like to define a specific INTERNAL GPU? (not recommended)&lt;/code&gt;, confirm with &lt;code&gt;Y&lt;/code&gt;. I didn't do this initially and things didn't work. Only after explicitly configuring the internal and external GPU, it started working. This may be different for you though.&lt;/p&gt;&#xA;&lt;p&gt;Now you should be good to go. Connect the monitor to the eGPU and make the switch:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo egpu-switcher switch egpu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot your machine.&lt;/p&gt;&#xA;&lt;p&gt;If you don't see anything on the external monitor, hit &lt;code&gt;super + p&lt;/code&gt; a few times until your monitor lights up.&lt;/p&gt;&#xA;&lt;h3&gt;Things that don't work&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;hot plugging is not possible, you'll always need to connect your eGPU and do a reboot&lt;/li&gt;&#xA;&lt;li&gt;&lt;strike&gt;I'm using Blender and even with the latest Mesa drivers (20.3.1), OpenCL rendering with Cycles is not an option (I may try Nvidia with CUDA in the future)&lt;/strike&gt; (look below to see how to make it work)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Overall experience&lt;/h3&gt;&#xA;&lt;p&gt;Setting it up was fairly simple. I have no experience whatsoever with eGPU's, and I was up and running in under an hour.&lt;/p&gt;&#xA;&lt;p&gt;For me, this is a massive leap forward. I'm coming from the iGPU (Intel UHD 620) and it feels like I have a new computer. The speed is amazing.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ibGdV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ibGdV.png&quot; alt=&quot;elementary OS 5.1 with eGPU installed&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h2&gt;UPDATE 24 Jan 2021&lt;/h2&gt;&#xA;&lt;p&gt;I managed to make Cycles GPU rendering work in Blender by installing the proprietary drivers from AMD. It takes some courage to install them, but it works flawlessly. Here is how I did it.&lt;/p&gt;&#xA;&lt;p&gt;AMD only supports a few distros, and only specific versions at that. Luckily, &lt;a href=&quot;https://www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-580&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu 18.04 LTS is one of them&lt;/a&gt;, but it won't install on elementary OS Hera. A simple trick is to change the contents of the release file, but be careful here.&lt;/p&gt;&#xA;&lt;p&gt;First, make a backup of the original file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /usr/lib/os-release /usr/lib/os-release-original&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Replace the contents of &lt;code&gt;/usr/lib/os-release&lt;/code&gt; with the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;NAME=&amp;quot;Ubuntu&amp;quot;&#xA;VERSION=&amp;quot;18.04 LTS (Bionic Beaver)&amp;quot;&#xA;ID=ubuntu&#xA;ID_LIKE=debian&#xA;PRETTY_NAME=&amp;quot;Ubuntu 18.04 LTS&amp;quot;&#xA;VERSION_ID=&amp;quot;18.04&amp;quot;&#xA;HOME_URL=&amp;quot;https://www.ubuntu.com/&amp;quot;&#xA;SUPPORT_URL=&amp;quot;https://help.ubuntu.com/&amp;quot;&#xA;BUG_REPORT_URL=&amp;quot;https://bugs.launchpad.net/ubuntu/&amp;quot;&#xA;PRIVACY_POLICY_URL=&amp;quot;https://www.ubuntu.com/legal/terms-and-policies/privacy-policy&amp;quot;&#xA;VERSION_CODENAME=bionic&#xA;UBUNTU_CODENAME=bionic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And run the AMD installation script:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;./amdgpu-install --opencl=legacy,pal --headless --no-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When it's done, revert the contents of &lt;code&gt;/usr/lib/os-release&lt;/code&gt; and do a reboot.&lt;/p&gt;&#xA;&lt;p&gt;Now you can use GPU rendering in Blender:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/r3vBf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/r3vBf.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;To give you an idea about the speed boost of CPU vs GPU rendering, I rendered the default cube in a new document with default settings (128 samples) and these are the results:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;CPU: 26s (64 x 64 px tile size, 8 threads)&lt;/li&gt;&#xA;&lt;li&gt;GPU: 11s (1920 x 1080 px tile size)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="12375" LastEditorUserId="12375" LastEditDate="2021-01-24T15:03:38.307" LastActivityDate="2021-01-24T15:03:38.307" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26199" PostTypeId="1" CreationDate="2020-12-23T20:32:22.673" Score="0" ViewCount="150" Body="&lt;p&gt;&lt;strong&gt;Issue&lt;/strong&gt;&lt;br /&gt;&#xA;Lately, my elementary OS has started hanging a lot. Like a few times a week. At times, these hangs make the icons or buttons, etc. on the screen change into white rectangles. Then, I have to forcefully restart my PC and I lose important unsaved stuff.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Specifications&lt;/strong&gt;&lt;br /&gt;&#xA;eOS Version: 5.1.7 Hera (Built on Ubuntu 18.04.4 LTS)&lt;br /&gt;&#xA;Kernel: 5.4.0-58-generic&lt;br /&gt;&#xA;Laptop: Lenovo Thinkpad E585 (with AMD processor &amp;amp; graphics card)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Fix not working&lt;/strong&gt;&lt;br /&gt;&#xA;I reinstalled elementary OS last night and by now it has already hanged thrice. The last time I noticed the screen turns black after a few seconds of the hanging.&lt;/p&gt;&#xA;&lt;p&gt;I am wondering if anyone else is suffering from a similar issue and have found the solution? I was thinking of moving to some other Linux distribution but I sort of like eOS and find it hard to leave it.&lt;/p&gt;&#xA;" OwnerUserId="20018" LastEditorUserId="20018" LastEditDate="2020-12-24T08:11:01.317" LastActivityDate="2020-12-24T08:11:01.317" Title="elementary OS hangs a lot" Tags="|release-hera|amd|lenovo|black-screen|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26200" PostTypeId="2" ParentId="5231" CreationDate="2020-12-24T08:23:09.263" Score="1" Body="&lt;p&gt;Got my XPS 15(9500) with 1920x1080(GTX1650Ti/i7-10750H) yesterday. Disabled secureBoot and intelRaid from bootMenu and overwrote windows completely. Elementary(Hera) has been flawlessly installed and is working like charm, autodetecting anything (fingerPrint - i don't care ). Latest nvidiaDrivers provided by appCenter and also working including graphicCardSwitch (req. reboot).&#xA;Whole process took about 20-30 min. Perfect. Thx.&lt;/p&gt;&#xA;" OwnerUserId="24699" LastEditorUserId="24699" LastEditDate="2020-12-24T08:29:19.583" LastActivityDate="2020-12-24T08:29:19.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26201" PostTypeId="1" AcceptedAnswerId="26202" CreationDate="2020-12-24T15:48:53.560" Score="3" ViewCount="49" Body="&lt;p&gt;in the standard email client I do not see attachments, how do I see them?&lt;/p&gt;&#xA;" OwnerUserId="24697" LastActivityDate="2020-12-24T16:16:18.020" Title="How do I view attachments in the default email client?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26202" PostTypeId="2" ParentId="26201" CreationDate="2020-12-24T16:16:18.020" Score="0" Body="&lt;p&gt;Double click on the email so that the preview/viewing pane opens up and then they're just below that.&lt;/p&gt;&#xA;&lt;p&gt;I made you a helpful graphic:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BK3f2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BK3f2.png&quot; alt=&quot;open attachments&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can double-click on the attachment and open it in the default client. If you right click on it, your choices are 'open' and 'save'.&lt;/p&gt;&#xA;&lt;p&gt;After a few tests, they all showed up. If you're unable to see an expected attachment, I'd suspect that it's a malformed email. I was able to send and receive several emails with attachments in short order.&lt;/p&gt;&#xA;&lt;p&gt;Tested with eOS Here 5.1.7&lt;/p&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2020-12-24T16:16:18.020" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26203" PostTypeId="2" ParentId="26185" CreationDate="2020-12-25T17:27:04.937" Score="0" Body="&lt;p&gt;Confirmed with the latest OS round of updates from the past couple of days. Booting into the OS with Bluetooth-USB dongle keyboard and mouse leaves them inoperative and the keyboard refuses to work even when plugged in via the USB cable directly. After the login screen is shown, the keyboard's led for connection flashes a couple of times and then all the leds power off (Logitech G915 TKL). Both the GRUB menu and the other OS's on the same PC work fine. The problems also disappear when booting into the recovery (5.4.0-54 or 5.4.0-58) and then choosing the resume booting option.&lt;/p&gt;&#xA;&lt;p&gt;This is what recovery booting process shows:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XFUr6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XFUr6.jpg&quot; alt=&quot;Recovery boot with 5.4.0-54&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Possibly USB related?&lt;/p&gt;&#xA;" OwnerUserId="24705" LastEditorUserId="24705" LastEditDate="2020-12-25T19:34:18.230" LastActivityDate="2020-12-25T19:34:18.230" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26205" PostTypeId="1" CreationDate="2020-12-26T01:03:05.207" Score="1" ViewCount="36" Body="&lt;p&gt;I'm using elementary OS since the 0.2, on different machines, and I really enjoy see this project grow bigger and bigger every year. My current machine is a ryzen laptop, and elementary runs really great, except some little bugs when installed a year ago but seems to be gone.&lt;/p&gt;&#xA;&lt;p&gt;What instead is &lt;strong&gt;VERY ANNOYING&lt;/strong&gt; is a lack of &lt;em&gt;&lt;strong&gt;battery management and energy in general&lt;/strong&gt;&lt;/em&gt;. I'd like to have some simple options to decide what the system should do on 20% battery left (for example), and what to do on 10% battery left (example). I'd like to easily manage the &lt;em&gt;&lt;strong&gt;CPU frequencie range&lt;/strong&gt;&lt;/em&gt;, like a cpufreq GUI integrated in Settings. Right now I'm using some terminal tweaks to set the range because by default turbo boost is enabled and the CPU in idle has a 65-70C &lt;strong&gt;INSANE&lt;/strong&gt; temperature.&lt;/p&gt;&#xA;" OwnerUserId="24708" LastActivityDate="2020-12-26T01:03:05.207" Title="Better energy management" Tags="|battery|cpu|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26206" PostTypeId="1" CreationDate="2020-12-26T08:37:52.903" Score="0" ViewCount="40" Body="&lt;p&gt;For some reason, it doesn't see all the RAM. My laptop has 8gb installed&lt;a href=&quot;https://i.stack.imgur.com/QJYXY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QJYXY.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24697" LastActivityDate="2020-12-26T08:37:52.903" Title="Does not see all RAM" Tags="|release-hera|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26208" PostTypeId="1" CreationDate="2020-12-26T13:46:55.883" Score="0" ViewCount="293" Body="&lt;p&gt;today when I booted Linux it gave me this error:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qUt8z.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qUt8z.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;What can I do? I'm Linux noob, so can u help me step by step? Thank you in advance!&lt;/p&gt;&#xA;" OwnerUserId="24710" LastActivityDate="2020-12-26T13:46:55.883" Title="/dev/nvme1n1p1 requires a manual fsck" Tags="|boot|system|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26209" PostTypeId="2" ParentId="2704" CreationDate="2020-12-26T14:06:48.410" Score="1" Body="&lt;p&gt;Apparently it works if you set English(US) at first (I don't know why, but English Intl. didn't work for me) and then some other language, the icon magically appears. I had the same issue with EN/PT.&lt;/p&gt;&#xA;" OwnerUserId="9158" LastActivityDate="2020-12-26T14:06:48.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26212" PostTypeId="2" ParentId="25380" CreationDate="2020-12-27T11:38:44.923" Score="0" Body="&lt;p&gt;Hello there I also have this issue. In KDE there is a quick and easy way to set color profiles so on one of the distros I set the color profile to Color space:AppleRGB and it helped with my problem. I am not sure how to set that in Elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="23686" LastActivityDate="2020-12-27T11:38:44.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26214" PostTypeId="1" CreationDate="2020-12-27T15:43:13.090" Score="0" ViewCount="35" Body="&lt;p&gt;Used Rufus for creating bootable file of hera 5. But it always shows error.It shows 'Unable to download file'. Please fix this as early as possible.&lt;/p&gt;&#xA;" OwnerUserId="24717" LastActivityDate="2021-01-27T11:03:15.257" Title="Unable to create bootable" Tags="|release-hera|boot|usb|error|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26215" PostTypeId="1" AcceptedAnswerId="26219" CreationDate="2020-12-28T02:49:54.983" Score="0" ViewCount="232" Body="&lt;p&gt;My OS version is 5.1.7 Hera. I got the following error when I try to update in app center:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; - W: GPG error: https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04 ./ InRelease: The following signatures were invalid: EXPKEYSIG DFA175A75104960E Emulators OBS Project &amp;lt;Emulators@build.opensuse.org&amp;gt;&#xA; - E: The repository 'https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04 ./ InRelease' is not signed.&#xA; - W: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA; - W: See apt-secure(8) manpage for repository creation and user configuration details.&#xA; - E: https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04 ./ InRelease is not (yet) available (The following signatures were invalid: EXPKEYSIG DFA175A75104960E Emulators OBS Project &amp;lt;Emulators@build.opensuse.org&amp;gt;)&#xA; - W: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target Packages (main/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11 (main/dep11/Components-amd64.yml) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11 (main/dep11/Components-all.yml) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11-icons-small (main/dep11/icons-48x48.tar) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11-icons (main/dep11/icons-64x64.tar) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target DEP-11-icons-large (main/dep11/icons-128x128.tar) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target CNF (main/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA; - W: Target CNF (main/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:52 and /etc/apt/sources.list.d/vivaldi.list:3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried &lt;code&gt;sudo-apt-update&lt;/code&gt;, &lt;code&gt;sudo-apt-upgrade&lt;/code&gt;, &lt;code&gt;sudo-apt-autoremove&lt;/code&gt;, but still error.&#xA;I also tried &lt;code&gt;apt-get clean&lt;/code&gt;, &lt;code&gt;rm -rf /var/lib/apt/lists/*&lt;/code&gt;, &lt;code&gt;apt-get clean&lt;/code&gt;, &lt;code&gt;apt-get update&lt;/code&gt;, &lt;code&gt;apt-get upgrade&lt;/code&gt;, but still got error.&lt;/p&gt;&#xA;&lt;p&gt;I don't understand how to fix it. Any help will be appreciated. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="24722" LastEditorUserId="26" LastEditDate="2020-12-30T19:32:25.750" LastActivityDate="2020-12-30T19:37:05.167" Title="Failed to Fetch Updates when I try to update in app center" Tags="|updates|error|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26217" PostTypeId="2" ParentId="26214" CreationDate="2020-12-28T10:46:07.453" Score="1" Body="&lt;p&gt;It's possible a problem with Rufus, not with elementary OS. You could download the elementary ISO yourself here: &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After that you can point to the downloaded image from Rufus. You could also use another tool like YUMI, UnetBootin or Balena Etcher.&lt;/p&gt;&#xA;" OwnerUserId="24724" LastActivityDate="2020-12-28T10:46:07.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26218" PostTypeId="1" CreationDate="2020-12-28T11:23:47.230" Score="1" ViewCount="125" Body="&lt;p&gt;I am new to linux and I have just installed elementary OS 5.1.7 hera (built on Ubintu 18.04.4 LTS).&#xA;I can't change the keyboard to hiragana layout. When I go to system settings&amp;gt;keyboard&amp;gt;layout and add japanese(kana), I can only type in katakana.&#xA;How can I fix this? Please be aware I am new to linux and will need a lot of hand holding.&#xA;Thanks,&#xA;Pablo&lt;/p&gt;&#xA;" OwnerUserId="24725" LastActivityDate="2024-01-18T05:01:45.290" Title="How to switch to Hiragana keyboard" Tags="|keyboard|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26219" PostTypeId="2" ParentId="26215" CreationDate="2020-12-28T13:41:37.223" Score="3" Body="&lt;p&gt;This will resolve your issue:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO - https://download.opensuse.org/repositories/Emulators:/Wine:/Debian/xUbuntu_18.04/Release.key | sudo apt-key add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24727" LastActivityDate="2020-12-28T13:41:37.223" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26220" PostTypeId="2" ParentId="26215" CreationDate="2020-12-28T19:27:43.930" Score="0" Body="&lt;p&gt;&lt;em&gt;[Solved]  Thanks to D.Foerster&#xA;&lt;a href=&quot;https://github.com/davidfoerster/aptsources-cleanup/releases/tag/v0.1.7.5.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/davidfoerster/aptsources-cleanup/releases/tag/v0.1.7.5.1&lt;/a&gt;&#xA;Can easily follow this:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/760896/how-can-i-fix-apt-error-w-target-packages-is-configured-multiple-times&quot;&gt;https://askubuntu.com/questions/760896/how-can-i-fix-apt-error-w-target-packages-is-configured-multiple-times&lt;/a&gt;&#xA;It works fine for me, but still not understanding why it happens&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;It seems to be almost the same problem. It start when i tried to install autopsy from repo.&#xA;Tried to fix but still having problems. Anyone can help?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;W: L'obiettivo Packages (restricted/binary-amd64/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (restricted/binary-i386/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (restricted/binary-all/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-it_IT) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-it) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-en) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (restricted/dep11/Components-amd64.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (restricted/dep11/Components-all.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-small (restricted/dep11/icons-48x48.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons (restricted/dep11/icons-64x64.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-hidpi (restricted/dep11/icons-64x64@2.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-large (restricted/dep11/icons-128x128.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (restricted/cnf/Commands-amd64) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (restricted/cnf/Commands-all) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-amd64/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-i386/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-all/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-it_IT) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-it) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-en) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (main/dep11/Components-amd64.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (main/dep11/Components-all.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-small (main/dep11/icons-48x48.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons (main/dep11/icons-64x64.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-large (main/dep11/icons-128x128.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (main/cnf/Commands-amd64) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (main/cnf/Commands-all) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (restricted/binary-amd64/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (restricted/binary-i386/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (restricted/binary-all/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-it_IT) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-it) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (restricted/i18n/Translation-en) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (restricted/dep11/Components-amd64.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (restricted/dep11/Components-all.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-small (restricted/dep11/icons-48x48.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons (restricted/dep11/icons-64x64.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-hidpi (restricted/dep11/icons-64x64@2.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-large (restricted/dep11/icons-128x128.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (restricted/cnf/Commands-amd64) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (restricted/cnf/Commands-all) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-amd64/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-i386/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Packages (main/binary-all/Packages) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-it_IT) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-it) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo Translations (main/i18n/Translation-en) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (main/dep11/Components-amd64.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11 (main/dep11/Components-all.yml) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-small (main/dep11/icons-48x48.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons (main/dep11/icons-64x64.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-hidpi (main/dep11/icons-64x64@2.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo DEP-11-icons-large (main/dep11/icons-128x128.tar) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (main/cnf/Commands-amd64) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;W: L'obiettivo CNF (main/cnf/Commands-all) è configurato molteplici volte in /etc/apt/sources.list:42 e /etc/apt/sources.list:46&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24729" LastEditorUserId="26" LastEditDate="2020-12-30T19:37:05.167" LastActivityDate="2020-12-30T19:37:05.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26223" PostTypeId="1" CreationDate="2020-12-29T00:58:29.537" Score="1" ViewCount="53" Body="&lt;p&gt;I was just browsing on Chrome when I decided to change my volume through the wingpanel. It wasn't responding and it disappeared. I decided to restart my laptop to see if that would fix my problem but alas no luck.&lt;/p&gt;&#xA;&lt;p&gt;I have tried wingpanel &amp;amp; command it returns with the following &lt;a href=&quot;https://i.imgur.com/oQPlT4V.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;message&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please help.&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="24733" LastActivityDate="2020-12-29T00:58:29.537" Title="Elemenntary OS Wingpanel not loading" Tags="|wingpanel|elementary-project|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26224" PostTypeId="1" CreationDate="2020-12-29T01:22:18.543" Score="1" ViewCount="24" Body="&lt;p&gt;I have noticed over time that some of the folders in the Home folder have started having the icon disapear and at the bottom right of the files window when I leave the mouse over the missing folder it says &amp;quot;Link to symbolic Link&amp;quot;. When I do ls -l it shows that they are now links and not directory's. I dident do this how did this happen and how do i make them directory's again and not links?&lt;a href=&quot;https://i.stack.imgur.com/fjpd7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fjpd7.jpg&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24689" LastActivityDate="2020-12-29T01:22:18.543" Title="Home Directory Folders Problems" Tags="|home|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26225" PostTypeId="1" CreationDate="2020-12-29T16:17:44.473" Score="0" ViewCount="76" Body="&lt;p&gt;I have some Wine packages held back when updating&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Listing... Done&#xA;wine-stable/bionic 5.0.3~bionic amd64 [upgradable from: 4.0.3~bionic]&#xA;wine-stable-amd64/bionic 5.0.3~bionic amd64 [upgradable from: 4.0.3~bionic]&#xA;wine-stable-i386/bionic 5.0.3~bionic i386 [upgradable from: 4.0.3~bionic]&#xA;michael@BamBam2:/$ sudo apt-get --with-new-pkgs upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages have been kept back:&#xA;  wine-stable&#xA;0 to upgrade, 0 to newly install, 0 to remove and 1 not to upgrade.&#xA;michael@BamBam2:/$ sudo apt-get install wine-stable&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; wine-stable : Depends: wine-stable-i386 (= 5.0.3~bionic)&#xA;               Depends: wine-stable-amd64 (= 5.0.3~bionic) but 4.0.3~bionic is to be installed&#xA;E: Unable to correct problems, you have held broken packages.&#xA;michael@BamBam2:/$ sudo apt-get install wine-stable-amd64&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; wine-stable-amd64 : Depends: libfaudio0 but it is not installable&#xA;E: Unable to correct problems, you have held broken packages.&#xA;michael@BamBam2:/$ sudo apt-get install wine-stable-i386&#xA;[sudo] password for michael:          &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; wine-stable-i386:i386 : Depends: libfaudio0:i386 but it is not installable&#xA;E: Unable to correct problems, you have held broken packages.&#xA;michael@BamBam2:/$ sudo apt-get install --install-recommends winehq-stable&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies.&#xA; winehq-stable : Depends: wine-stable (= 5.0.3~bionic)&#xA;E: Unable to correct problems, you have held broken packages. ```&#xA;&#xA;So it looks like I have a problem with libfaudio0?&#xA;&#xA;Also, why doesn't my second ``` end the code format?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16805" LastActivityDate="2020-12-29T16:17:44.473" Title="Wine packages are held back" Tags="|wine|dependencies|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="26226" PostTypeId="1" CreationDate="2020-12-29T21:52:42.673" Score="0" ViewCount="44" Body="&lt;p&gt;how can I reinstall eOS 5.1.7? Now I have this OS, but due to some reasons I can't install any application.  Therefore I want to reinstall eOS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --reinstall elementary-desktop&lt;/code&gt; DOES NOT HELP.&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="24738" LastEditorUserId="26" LastEditDate="2020-12-30T19:05:54.010" LastActivityDate="2020-12-30T19:05:54.010" Title="How can I reinstall eOS 5.1.7?" Tags="|software-installation|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26228" PostTypeId="1" CreationDate="2020-12-30T11:25:54.710" Score="0" ViewCount="243" Body="&lt;p&gt;Been trying out the 6.0 early release, but cant seem to update the kernel which is needed for my laptop. The early release has 5.4 and I need 5.8 (AMD 4500U).&lt;/p&gt;&#xA;&lt;p&gt;I &lt;em&gt;think&lt;/em&gt; I am doing the same as I did with the PopOS install I have it dual booted with, but nothing seems to happen. When I reboot &lt;code&gt;uname -r&lt;/code&gt; gives the same 5.4 kernel, and I cant see anything in grub either.&lt;/p&gt;&#xA;&lt;p&gt;I have tried with various kernels from the ubuntu kernel download page, and installed with &lt;code&gt;sudo dpkg -i *.deb&lt;/code&gt; from the folder I stored the files in.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="18042" LastActivityDate="2024-01-24T02:03:30.590" Title="Odin 6.0 Beta: Cant update kernel" Tags="|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26231" PostTypeId="1" CreationDate="2020-12-30T20:13:46.903" Score="0" ViewCount="396" Body="&lt;p&gt;&lt;strong&gt;Disclaimer: Newbie to Linux!&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Recently installed Elementary OS as my main driver (not dual) booting for my Dell Inspiron laptop.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Issue:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;System freezes randomly. Sometimes the freeze is just the display with sound and mouse/ keyboard working and sometimes it's a whole system freeze (display still on but frozen) and sometimes it starts with a display freeze then turns into a whole system freeze.&lt;/p&gt;&#xA;&lt;p&gt;No clue where this is coming from. Happy to share more system info/ dumps info if needed.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Why I am posting this:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I do not want to revert back to Windows to be frank and most of the fixes I have seen have been for Nvidia GPU issues. Also the one thread I found not (Nvidia GPU) was never resolved and is three years old.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;System Info:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;description: Notebook&#xA;    product: Inspiron 7375 (0884)&#xA;    vendor: Dell Inc.&#xA;    version: 1.5.0&#xA;    serial: 39GD8L2&#xA;    width: 64 bits&#xA;    capabilities: smbios-3.1 dmi-3.1 smp vsyscall32&#xA;    configuration: boot=normal chassis=notebook family=Inspiron sku=0884 uuid=44454C4C-3900-1047-8044-B3C04F384C32&#xA;  *-core&#xA;       description: Motherboard&#xA;       product: 0GTNWX&#xA;       vendor: Dell Inc.&#xA;       physical id: 0&#xA;       version: A00&#xA;       serial: .39GD8L2.CNWSC0084900ZK.&#xA;       slot: Type2 - Board Chassis Location&#xA;     *-firmware&#xA;          description: BIOS&#xA;          vendor: Dell Inc.&#xA;          physical id: 0&#xA;          version: 1.5.0&#xA;          date: 07/09/2018&#xA;          size: 128KiB&#xA;          capacity: 8128KiB&#xA;          capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb smartbattery biosbootspecification netboot uefi&#xA;     *-cpu&#xA;          description: CPU&#xA;          product: AMD Ryzen 7 2700U with Radeon Vega Mobile Gfx&#xA;          vendor: Advanced Micro Devices [AMD]&#xA;          physical id: 4&#xA;          bus info: cpu@0&#xA;          version: AMD Ryzen 7 2700U with Radeon Vega Mobile Gfx&#xA;          serial: Unknown&#xA;          slot: FP5&#xA;          size: 1381MHz&#xA;          capacity: 3800MHz&#xA;          width: 64 bits&#xA;          clock: 100MHz&#xA;          capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb hw_pstate sme ssbd sev ibpb vmmcall fsgsbase bmi1 avx2 smep bmi2 rdseed adx smap clflushopt sha_ni xsaveopt xsavec xgetbv1 xsaves clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov succor smca cpufreq&#xA;          configuration: cores=4 enabledcores=4 threads=8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://etherpad.osuosl.org/Dmesg_Dump&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dmesg dump:&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Update: after using the GUI instead (And going through yet another crash). I have recovered a critical Kernel failure that popped up a couple times and then once before the crash:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[  962.010430] [UFW BLOCK] IN=wlp1s0 OUT= MAC=01:00:5e:00:00:01:48:5d:36:12:ea:21:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=8221 DF PROTO=2 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24748" LastEditorUserId="24748" LastEditDate="2020-12-31T00:24:37.707" LastActivityDate="2024-02-17T11:02:40.300" Title="Elementary OS Freezes Randomly after booting [AMD Ryzen 7]" Tags="|graphics|amd|crash|dell|ryzen|" AnswerCount="2" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="26232" PostTypeId="1" CreationDate="2020-12-30T23:02:19.927" Score="0" ViewCount="181" Body="&lt;p&gt;When I want to download anything in the application center, the following phrase appears:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Error while installing package: installed amavisd-new package post-installation script subprocess returned error exit status 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Can you help me ?&lt;/p&gt;&#xA;" OwnerUserId="24750" LastEditorUserId="26" LastEditDate="2020-12-31T18:19:38.553" LastActivityDate="2024-02-15T07:02:15.270" Title="Why can't I install anything in the application center?" Tags="|appcenter|package|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26234" PostTypeId="2" ParentId="26232" CreationDate="2020-12-31T07:30:58.377" Score="0" Body="&lt;p&gt;When I used these two commands, these commands appeared to me in both of them :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6XjrP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6XjrP.png&quot; alt=&quot;The commands that appeared to me&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24754" LastActivityDate="2020-12-31T07:30:58.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26235" PostTypeId="2" ParentId="25765" CreationDate="2020-12-31T09:12:37.067" Score="0" Body="&lt;p&gt;There is a workaround: in the file &lt;code&gt;/usr/share/applications/firefox.desktop&lt;/code&gt; change the line &lt;code&gt;Exec=firefox %u&lt;/code&gt; to &lt;code&gt;Exec=env GTK_CSD=0 firefox %u&lt;/code&gt;. Found this solution at &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/j3h3fp/firefox_users_anyone_seeing_an_issue_where/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/j3h3fp/firefox_users_anyone_seeing_an_issue_where/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24755" LastActivityDate="2020-12-31T09:12:37.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26236" PostTypeId="1" CreationDate="2020-12-31T13:32:12.667" Score="0" ViewCount="269" Body="&lt;p&gt;TLDR: I want to run Midnight Commander as default File manager, I need to know how to change default terminal for &lt;code&gt;Terminal=true&lt;/code&gt; from xterm to anything else. pantheon-terminal seems to be not suitable.&lt;/p&gt;&#xA;&lt;p&gt;So now I've set midnight commander as my default File manager but it keeps opening in xterm. I cannot find a way to change it to elementary terminal emulator anywhere.&lt;/p&gt;&#xA;&lt;p&gt;I've loosely rgrep'd &lt;code&gt;/usr/share&lt;/code&gt; directory but could not find anything relevant, same for &lt;code&gt;/etc&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;update-alternatives&lt;/code&gt; lists default terminal emulator as &lt;code&gt;io.elementary.terminal&lt;/code&gt; so the problem shouldn't be there.&lt;/p&gt;&#xA;&lt;p&gt;Also when I run &lt;code&gt;io.elementary.terminal --new-window --execute=mc&lt;/code&gt; it opens new window AND new tab (two tabs total: one with shell, other with &lt;code&gt;mc&lt;/code&gt;). Besides that I cannot be sure how it handles spaces in path names to add the command directly to the &lt;code&gt;Exec=&lt;/code&gt; line. Should I write elementary terminal off completely?&lt;/p&gt;&#xA;&lt;p&gt;When the elementary terminal starts like that it reports its height as 1 row, because of that mc quits and reports that it does not support that height. It seems that whatever I do it always starts a shell.&lt;/p&gt;&#xA;&lt;p&gt;versions:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mc/bionic,now 3:4.8.19-1 amd64 [installed]&#xA;pantheon-terminal/bionic,now 5.5.1+r1640+pkg72~ubuntu5.1.2.1 amd64 [installed,automatic]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24756" LastEditorUserId="24756" LastEditDate="2020-12-31T13:38:10.167" LastActivityDate="2024-01-26T00:01:51.300" Title="How do I change xdg applications with Terminal=true in .desktop to open in something else than xterm?" Tags="|release-hera|settings|pantheon-terminal|app-shortcuts|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26237" PostTypeId="1" CreationDate="2020-12-31T14:02:41.570" Score="1" ViewCount="179" Body="&lt;p&gt;I just installed Elementary OS 5.1.7 Hera. I've been using Ubuntu before this and I had my Nvidia profile set as &amp;quot;On-Demand&amp;quot; to reduce power usage and save battery life. I prefer using the GPU only when I want it.&lt;/p&gt;&#xA;&lt;p&gt;In Elementary OS I noticed that there is no &amp;quot;On-Demand&amp;quot; profile available.&lt;/p&gt;&#xA;&lt;p&gt;So why is that? I'm probably missing some information about how Elementary OS installs Nvidia Drivers by default compared to Ubuntu when installing the distro.&lt;/p&gt;&#xA;&lt;p&gt;Also, is it possible to get the &amp;quot;On-Demand&amp;quot; profile?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: Just to make it clear. I did not manually install the nvidia-drivers. It was installed automatically when I installed the OS.&lt;/p&gt;&#xA;" OwnerUserId="24757" LastActivityDate="2020-12-31T14:02:41.570" Title="No Nvidia &quot;On-Demand&quot; option in Elementary OS?" Tags="|nvidia|nvidia-driver|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26240" PostTypeId="1" CreationDate="2021-01-02T03:22:34.823" Score="1" ViewCount="58" Body="&lt;p&gt;Issues since install:&#xA;My new Lenovo yoga 7i is working harder with the new linux OS. But it comes in spurts.&#xA;Track pad does not work. Sound output unable to figure out. Sound input (mic) unable to figure out. I also have a touch screen and fingerprint scanner. Both I can live without, but if I can get direction on the initial issues, and also some guidance on installing .deb files using the command prompt. I am very new at this, just trying to see if I can make Linux work.&lt;/p&gt;&#xA;&lt;p&gt;Also if someone could provide a link to instructions on how to safely remove the additional OS from my computer that would be great. I am not at that point yet, and Can still do a dual boot, but I wouldn't mind cleaning up the entire boot process to make it look cleaner if someone has advice on that for this version of linux with windows 10&lt;/p&gt;&#xA;" OwnerUserId="24772" LastActivityDate="2021-01-02T22:24:42.167" Title="Installed elementary OS need help with multiple issues (first time Linux user)" Tags="|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26241" PostTypeId="1" CreationDate="2021-01-02T10:27:13.027" Score="1" ViewCount="293" Body="&lt;p&gt;I'm new to linux, i'm trying to install Elementary OS on my Mac Pro, I get the 'elementary os' boot screen and the count down from 10 seconds but when I allow the operation to boot - it just goes to a black screen resulting in me restarting or shutting down the system.&lt;/p&gt;&#xA;&lt;p&gt;I've also tried booting using 'f10' which yielded the same result.&lt;/p&gt;&#xA;&lt;p&gt;Can I boot elementary using the command line?&lt;/p&gt;&#xA;&lt;p&gt;Any thoughts or suggestions would be greatly appreciated! Apologies if this has been asked before.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT: so I tried the following thank you for the suggestions but again im not sure if i've done something wrong&lt;a href=&quot;https://i.stack.imgur.com/jLaM7.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jLaM7.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Steve&lt;/p&gt;&#xA;" OwnerUserId="24775" LastEditorUserId="24775" LastEditDate="2021-01-03T15:23:52.810" LastActivityDate="2021-02-09T22:13:14.670" Title="Installing Elementary OS on Mac Pro 1,1 (black screen on after boot screen)" Tags="|boot|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26244" PostTypeId="1" AcceptedAnswerId="26367" CreationDate="2021-01-02T18:28:45.113" Score="0" ViewCount="56" Body="&lt;p&gt;I've been using elementary OS for a year now and haven't had problems previously. One day, however, I rebooted and found the system was dysfunctional in many parts but some parts still working, and being a noob I can't figure out where to start debugging.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Symptoms:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;wifi finds networks and tries to connect, but stuck in &amp;quot;wi-fi connecting&amp;quot;.&lt;/li&gt;&#xA;&lt;li&gt;trying to open some applications fail(e.g. Firefox, Spotify, VSCode) in the sense that the application doesn't open but checking with htop (which I'm able to do) the processes seem to be there.&lt;/li&gt;&#xA;&lt;li&gt;opening some other applications work (e.g. the system's graphical file explorer, calculator, Epiphany, and interestingly, Thunderbird [which is not installed with the system iirc])&lt;/li&gt;&#xA;&lt;li&gt;With terminal, I'm able to navigate the filesystem, use top/htop (as mentioned), use neofetch (image below), but e.g. issuing a command &lt;code&gt;sudo reboot&lt;/code&gt; will leave the process running, and ctrl+C doesn't have an effect.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WxiK2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WxiK2.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried to use Gnome instead of Pantheon (as seen in the neofetch output) but I saw no difference. My question is, what are some possible approaches for debugging this problem?&lt;/p&gt;&#xA;" OwnerUserId="22405" LastActivityDate="2021-01-23T11:16:27.400" Title="eOS booting fine but apps don't respond and terminal freezes" Tags="|release-hera|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26245" PostTypeId="2" ParentId="26240" CreationDate="2021-01-02T22:24:42.167" Score="1" Body="&lt;p&gt;Just use the dual boot to start with, Just google how to use the elementary OS on a dual boot with windows 10, I had Yoga until November never had an issue you described:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://thelinuxuser.com/dual-boot-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://thelinuxuser.com/dual-boot-elementary-os/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;eOS - Touch screen never worked and Fingerprint doesn't work also so don't bother about it much.&lt;/p&gt;&#xA;&lt;p&gt;Installing deb file just install like this using terminal:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dpkg -i file.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;When install new eOS just download the latest ISO Yoga 7i is a little old device so you should not have an issue with any drivers.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-01-02T22:24:42.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26246" PostTypeId="2" ParentId="26231" CreationDate="2021-01-02T22:40:17.400" Score="0" Body="&lt;p&gt;Looks like Nvidia driver issues happened a lot with me in past, I would start with GPU logs, Also can you please provide GPU info?, When you google just use ubuntu instead eOS that way you'll get more info.&lt;/p&gt;&#xA;&lt;p&gt;Nvidia is tricky some times they say they don't have a solution for a certain model I had an issue with &lt;strong&gt;gtx 1080 ti&lt;/strong&gt; GPU where Nvidia said they don't have a proper fix for ubuntu, I used an open-source driver instead of proprietary and that fixed my issue with &lt;strong&gt;gtx 1080 ti&lt;/strong&gt;. you can give it a try.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-01-02T22:40:17.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26248" PostTypeId="2" ParentId="26244" CreationDate="2021-01-02T22:46:32.797" Score="0" Body="&lt;p&gt;Try to disable onboard gpu(intel) from bios looks like you're using GPU card, then try to update the Nvidia driver if there any update. And always you can start looking at logs.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-01-02T22:46:32.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26249" PostTypeId="2" ParentId="26218" CreationDate="2021-01-02T22:52:41.997" Score="0" Body="&lt;p&gt;You've to add Input method also, And make sure &lt;strong&gt;ibus daemon&lt;/strong&gt; is running on start, then you can alwasy change layout by &lt;strong&gt;alt+shitf&lt;/strong&gt; and change input method by &lt;strong&gt;ctl+space&lt;/strong&gt;(Won't work if ibus daemon not running)&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-01-02T22:52:41.997" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26251" PostTypeId="1" CreationDate="2021-01-03T09:07:55.797" Score="0" ViewCount="327" Body="&lt;p&gt;Is it possible to install elementary applications on the command line instead of AppCenter? I have not found anything about this in the documentation.&lt;/p&gt;&#xA;" OwnerUserId="24672" LastActivityDate="2021-01-04T16:55:54.043" Title="Installation on the command line" Tags="|software-installation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26252" PostTypeId="2" ParentId="26251" CreationDate="2021-01-03T10:11:45.050" Score="1" Body="&lt;p&gt;I would suggest that you look at the apt command&#xA;this should probably be used as &amp;quot;sudo apt install {the application}&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="3581" LastActivityDate="2021-01-03T10:11:45.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26253" PostTypeId="2" ParentId="9464" CreationDate="2021-01-03T12:46:51.913" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Guys, in my opinion elementary OS should support paypal on &lt;strong&gt;main page&lt;/strong&gt; also (not only on &lt;a href=&quot;https://elementary.io/en/get-involved&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/en/get-involved&lt;/a&gt; page).&#xA;There are some users who do not have credit cards or do not want to pay with credit cards.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Another suggestion is to put &lt;strong&gt;$0 button&lt;/strong&gt; in 'Pay What You Want' row. As you can see - there are some concerns if users can download elementary OS for free.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Btw. I am delighted to use elementary OS - fantastic job!&#xA;I am working on my own Gtk3 app for elementary.&lt;/p&gt;&#xA;" OwnerUserId="24784" LastEditorUserId="24784" LastEditDate="2021-01-03T18:14:10.160" LastActivityDate="2021-01-03T18:14:10.160" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26254" PostTypeId="2" ParentId="26251" CreationDate="2021-01-03T16:02:00.397" Score="0" Body="&lt;p&gt;@George Yes, of course, this works wonderfully for programs from the Ubuntu sources. But not for those from the elementary AppCenter (maintained applications like &amp;quot;Develop&amp;quot;). Here the package is not found and you can (must) install it with the graphical tool.&lt;/p&gt;&#xA;" OwnerUserId="24672" LastActivityDate="2021-01-03T16:02:00.397" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26256" PostTypeId="1" CreationDate="2021-01-04T15:49:22.203" Score="0" ViewCount="101" Body="&lt;p&gt;hi i am very new to elementary os and interested how secure the os for using with my everyday purchasing. also how often are security updates and software updates are applied to the os.&lt;/p&gt;&#xA;&lt;p&gt;many thanks&#xA;Dave&lt;/p&gt;&#xA;" OwnerUserId="24807" LastActivityDate="2024-02-03T17:07:50.953" Title="security updates and software updates" Tags="|updates|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26257" PostTypeId="2" ParentId="26251" CreationDate="2021-01-04T16:55:54.043" Score="0" Body="&lt;p&gt;I have found my mistake. For example, if I want to install &amp;quot;Develop&amp;quot;, a simple &amp;quot;sudo apt install develop&amp;quot; is not enough, I have to give the full name, which I find out with &amp;quot;sudo apt search &amp;quot; for example.&lt;/p&gt;&#xA;&lt;p&gt;In my example &amp;quot;sudo apt install com.github.alcadica.develop&amp;quot;.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mc9c3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mc9c3.png&quot; alt=&quot;AppCenter Example&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24672" LastActivityDate="2021-01-04T16:55:54.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26258" PostTypeId="1" AcceptedAnswerId="26614" CreationDate="2021-01-05T03:35:57.373" Score="0" ViewCount="346" Body="&lt;p&gt;I'm trying to get my fingerprint reader for my T460S but when i try fprintd-enroll it says no readers found.&lt;/p&gt;&#xA;&lt;p&gt;I did install the validity-sensors-tools snap and my LED on my fingerprint reader does seem to flash but i just cannot enroll.&lt;/p&gt;&#xA;&lt;p&gt;I did also install the fingerprint-gui and ran it as sudo but no readers found.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="24811" LastActivityDate="2021-04-03T14:01:55.197" Title="T460S Fingerprint enroll" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26260" PostTypeId="2" ParentId="18701" CreationDate="2021-01-05T18:31:45.840" Score="0" Body="&lt;p&gt;Have you reviewed SVG icons directory to see if they've been removed?&#xA;Location:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;/usr/share/icons/elementary/actions/symbolic/*&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The five icons which you have highlighted are:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Next Icon:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;go-next-symbolic-rtl.svg&lt;/li&gt;&#xA;&lt;li&gt;go-next-symbolic.svg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Previous Icon:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;go-previous-symbolic-rtl.svg&lt;/li&gt;&#xA;&lt;li&gt;go-previous-symbolic.svg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;View Column:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;view-column-symbolic.svg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;View Grid:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;view-grid-symbolic.svg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;View List:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;view-list-symbolic.svg&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Try creating the View Column SVG file with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;svg height='16' width='16' xmlns='http://www.w3.org/2000/svg'&amp;gt;&#xA;  &amp;lt;g color='#bebebe' transform='translate(-853 -57)'&amp;gt;&#xA;    &amp;lt;path d='M854 60.5v9s0 .5.5.5h12s.5 0 .5-.5v-9c0-.5-.5-.5-.5-.5h-12s-.5 0-.5.5zm1 .5h3v8h-3zm4 0h3v8h-3zm4 0h3v8h-3z' fill='#666' overflow='visible' style='marker:none'/&amp;gt;&#xA;  &amp;lt;/g&amp;gt;&#xA;&amp;lt;/svg&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Then reload file explorer.&lt;/h2&gt;&#xA;&lt;p&gt;If that still does not work, try reinstalling the theme through:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://itsfoss.com/install-themes-icons-elementary-os-freya/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/install-themes-icons-elementary-os-freya/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;http://www.linuxandubuntu.com/home/how-to-install-themes-or-icons-in-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.linuxandubuntu.com/home/how-to-install-themes-or-icons-in-elementary-os&lt;/a&gt; (This link also has manual update option)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="23627" LastActivityDate="2021-01-05T18:31:45.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26262" PostTypeId="2" ParentId="25717" CreationDate="2021-01-06T12:28:28.607" Score="0" Body="&lt;p&gt;I have the same issue. changing GRUB_TIMEOUT to decimal and&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;didn't make a change.&lt;/p&gt;&#xA;&lt;p&gt;Does anybody face the same problem.&#xA;I'd like to have the elementary splash at startup and boot directly into login mode.&lt;/p&gt;&#xA;&lt;p&gt;my /etc/default/grub contains these active lines:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLE=hidden&#xA;GRUB_TIMEOUT=0.0&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24821" LastActivityDate="2021-01-06T12:28:28.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26264" PostTypeId="1" CreationDate="2021-01-06T19:19:34.933" Score="0" ViewCount="183" Body="&lt;p&gt;I get the following error when updating Python to the latest version:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;E: Unable to locate package python3.9.1&#xA;E: Couldn't find any package by glob 'python3.9.1'&#xA;E: Couldn't find any package by regex 'python3.9.1'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24839" LastEditorUserId="26072" LastEditDate="2021-06-26T11:27:29.990" LastActivityDate="2024-03-12T18:05:05.583" Title="Error updating Python to the Latest Version" Tags="|python|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26266" PostTypeId="1" CreationDate="2021-01-07T07:30:31.623" Score="1" ViewCount="190" Body="&lt;p&gt;On a fresh 5.1 installation I don't see input method indicator on a wingpanel. Aside of it everything is working – &lt;code&gt;ibus-daemon&lt;/code&gt; is added to the startup applications, I can change the layout with the hotkeys, but anyway, I'd have a place to see what's the current layout.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;wingpanel-indicator-keyboard&lt;/code&gt; is installed, &lt;code&gt;ibus-daemon&lt;/code&gt; is operating. So any suggestions on how to get the layout icon on wingpanel?&lt;/p&gt;&#xA;" OwnerUserId="24844" LastEditorUserId="84" LastEditDate="2021-07-27T21:04:39.447" LastActivityDate="2021-07-27T21:05:18.047" Title="Keyboard layout wingpanel icon is missing" Tags="|release-hera|wingpanel|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26267" PostTypeId="2" ParentId="26192" CreationDate="2021-01-07T08:39:30.853" Score="0" Body="&lt;p&gt;Problem solved!&lt;/p&gt;&#xA;&lt;p&gt;During the last system update, I removed the packages that were no longer needed via the terminal - the command for this was offered by the terminal. That's it&lt;/p&gt;&#xA;" OwnerUserId="24040" LastActivityDate="2021-01-07T08:39:30.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26268" PostTypeId="2" ParentId="26266" CreationDate="2021-01-07T09:19:27.317" Score="1" Body="&lt;p&gt;Some guy on elementary subreddit helped me. There is a bug discussed on github: &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-keyboard/issues/80&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-keyboard/issues/80&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;As suggested, I've changed &lt;code&gt;org.gnome.desktop.input-sources&lt;/code&gt; from &lt;code&gt;[('ibus', 'us'), ('xkb', 'ru')]&lt;/code&gt; to &lt;code&gt;[('xkb', 'us'), ('xkb', 'ru')]&lt;/code&gt; with the &lt;code&gt;dconf-editor&lt;/code&gt; GUI tool, and the indicator is visible now.&lt;/p&gt;&#xA;" OwnerUserId="24844" LastEditorUserId="84" LastEditDate="2021-07-27T21:05:18.047" LastActivityDate="2021-07-27T21:05:18.047" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26271" PostTypeId="2" ParentId="22218" CreationDate="2021-01-08T05:24:13.877" Score="0" Body="&lt;p&gt;&amp;quot;Elementary Tweaks&amp;quot; is for eos Juno and below.&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;Pantheon Tweaks&amp;quot; (which is a fork of &amp;quot;Elementary Tweaks&amp;quot;) is for Odin but it works fine on my Hera.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;(here you will find the commands to install it from PPA or from source code)&lt;/p&gt;&#xA;" OwnerUserId="24851" LastActivityDate="2021-01-08T05:24:13.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26273" PostTypeId="1" CreationDate="2021-01-08T16:50:49.060" Score="0" ViewCount="109" Body="&lt;p&gt;Topbar disappeared in elementary os 5.1.7.&#xA;When I type &amp;quot;wingpanel&amp;quot; in terminal, it gives me the following error:&lt;/p&gt;&#xA;&lt;p&gt;**(wingpanel:4691): GLib-GIO-ERROR &lt;strong&gt;: 22:15:40.645: Settings schema 'io.elementary.wingpanel.keyboard' is not installed&#xA;Trace/breakpoint trap&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please help me out.&lt;/p&gt;&#xA;" OwnerUserId="24854" LastEditorUserId="15904" LastEditDate="2021-02-10T23:11:34.950" LastActivityDate="2021-02-10T23:11:34.950" Title="Topbar disappeared in elementary os 5.1.7" Tags="|release-hera|wingpanel|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26274" PostTypeId="2" ParentId="26228" CreationDate="2021-01-08T19:09:43.513" Score="0" Body="&lt;p&gt;You can use &lt;a href=&quot;https://github.com/rshetye/kmp-downloader&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rshetye/kmp-downloader&lt;/a&gt; to download rs-kmpd-python3.py for python3-based download and install of mainline kernels.&lt;/p&gt;&#xA;" OwnerUserId="24855" LastActivityDate="2021-01-08T19:09:43.513" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26275" PostTypeId="1" AcceptedAnswerId="26279" CreationDate="2021-01-09T03:38:33.597" Score="0" ViewCount="423" Body="&lt;p&gt;OS version is 5.1.7 Hera. I got the following error when I try to update in app center:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;- W: GPG error: http://repo.vivaldi.com/stable/deb stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 793FEB8BB69735B2&#xA;- E: The repository 'http://repo.vivaldi.com/stable/deb stable Release' is not signed.&#xA;- N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;- N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Since the problem seem to be vivaldi, I tried to remove it (I don't use it anyway) using &lt;code&gt;sudo apt purge vivaldi&lt;/code&gt;, &lt;code&gt;sudo apt-get purge-vivaldi-stable&lt;/code&gt;, and &lt;code&gt;dpkg -l | grep vivaldi&lt;/code&gt;. After that I tried to update again, but the error persist.&lt;/p&gt;&#xA;&lt;p&gt;I also tried to try to import all missing GPG keys using &lt;code&gt;y-ppa-manager&lt;/code&gt;, but the error still persist.&lt;/p&gt;&#xA;&lt;p&gt;I don't understand how to fix it, so any help will be appreciated. Sorry for the trouble and thank you.&lt;/p&gt;&#xA;" OwnerUserId="24722" LastActivityDate="2021-01-14T13:08:05.323" Title="Got 'GPG error' when try to fetch update" Tags="|updates|error|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26277" PostTypeId="1" CreationDate="2021-01-10T01:56:29.910" Score="0" ViewCount="107" Body="&lt;p&gt;Appcenter can't update even though I've tried to update multiple times. It still shows that there is 1 component to update. Also tried to update in command line, it says everything is up to date. How can I fix this?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/p34Sy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/p34Sy.png&quot; alt=&quot;Appcenter screenshot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24861" LastActivityDate="2024-02-25T08:04:25.550" Title="Appcenter can't update system component" Tags="|appcenter|system|update-manager|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26278" PostTypeId="1" CreationDate="2021-01-10T09:54:37.663" Score="0" ViewCount="143" Body="&lt;p&gt;I wnated to know Why elementary os does not have a decent IDE for vala language?&#xA;vala is their programming language but unfortunately there is not a good IDE for it&#xA;I think they should have a IDE for vala&lt;/p&gt;&#xA;" OwnerUserId="24863" LastActivityDate="2021-01-10T09:54:37.663" Title="write an IDE for vala" Tags="|vala|ide|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26279" PostTypeId="2" ParentId="26275" CreationDate="2021-01-10T15:47:48.103" Score="2" Body="&lt;p&gt;Just remove the repo for your system:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo rm /etc/apt/sources.list.d/vivaldi.list&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I hope this help you&lt;/p&gt;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&lt;p&gt;Could you please try:&#xA;&lt;code&gt;&#xA;cd ~&#xA;wget &lt;a href=&quot;https://repo.vivaldi.com/stable/linux_signing_key.pub&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://repo.vivaldi.com/stable/linux_signing_key.pub&lt;/a&gt;&#xA;sudo apt-key add linux_signing_key.pub&#xA;&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24867" LastEditorUserId="24867" LastEditDate="2021-01-12T02:31:34.503" LastActivityDate="2021-01-12T02:31:34.503" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26280" PostTypeId="2" ParentId="26264" CreationDate="2021-01-10T16:00:15.653" Score="0" Body="&lt;p&gt;Update the packages list and install the prerequisites:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Add the deadsnakes PPA to your system’s sources list:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo add-apt-repository ppa:deadsnakes/ppa&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once the repository is enabled, you can install Python 3.9 by executing:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install python3.9&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;try to get the output: Python 3.9.0+&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;python3.9 --version &lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://linuxize.com/post/how-to-install-python-3-9-on-ubuntu-20-04/&quot; rel=&quot;nofollow noreferrer&quot;&gt;via&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24867" LastActivityDate="2021-01-10T16:00:15.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26281" PostTypeId="2" ParentId="26236" CreationDate="2021-01-10T16:26:27.810" Score="0" Body="&lt;p&gt;Install deepin-terminal&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install -y deepin-terminal&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Change default deepin-terminal theme to &lt;code&gt;tango&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Create the file &lt;code&gt;~/.local/share/applications/mc.desktop&lt;/code&gt; with contents&lt;/p&gt;&#xA;&lt;code&gt;&#xA;[Desktop Entry]&#xA;Name=Midnight Commander&#xA;MimeType=inode/directory&#xA;Exec=deepin-terminal -e mc %F&#xA;Terminal=true&#xA;Type=Application&#xA;Categories=FileManager&lt;/code&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/492897/how-to-set-midnight-commander-as-the-default-file-manager&quot;&gt;Answer based on&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24867" LastActivityDate="2021-01-10T16:26:27.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26285" PostTypeId="2" ParentId="18175" CreationDate="2021-01-11T05:13:57.253" Score="0" Body="&lt;p&gt;I think I might have worked it out.&lt;/p&gt;&#xA;&lt;p&gt;Elementary OS supplies its own GUI to manage ufw. The GUI has to be unlocked before it can be used.&lt;/p&gt;&#xA;&lt;p&gt;Am I correct in thinking that the GUI relocks itself after a timeout period, and then demands re-authentication?&lt;/p&gt;&#xA;" OwnerUserId="24853" LastActivityDate="2021-01-11T05:13:57.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26289" PostTypeId="1" CreationDate="2021-01-12T12:26:40.783" Score="0" ViewCount="57" Body="&lt;p&gt;I have an 24' iMac 2007 that I successfully installed the latest version of Elementary OS (Hera 5.1).&lt;/p&gt;&#xA;&lt;p&gt;Everything works out of the box fine except for the videocard driver which the system identified as Radeon 2600 XT, and it's understandable because it's device ID does match that of a 2600XT (0x9583), but I am certain that those iMacs have a 2600HD inside, hence this creates all sorts of problems(freezes, artifacts) in the eOS, especially when there is any hardware acceleration.&lt;/p&gt;&#xA;&lt;p&gt;I am certain this isn't a unique problem, because in this blog post the author covers the same issue when installing Windows 10 (&lt;a href=&quot;https://josephlo.wordpress.com/2015/08/09/tutorial-installing-windows-10-64-bit-on-2007-imac-7-1/&quot; rel=&quot;nofollow noreferrer&quot;&gt;link to blog&lt;/a&gt;) where he had to manually alter the drivers and device ID to force the system to install the correct ones.&lt;/p&gt;&#xA;&lt;p&gt;Is there any way I could do the same procedure on Elementary OS and it's pre-installed drivers?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: Here are the system specs inside Mac OS, while the GPU isn't specified as PRO (device id matches that of a XT), in the case of Windows install, a driver for 2600 PRO is suggested instead of XT version. &lt;a href=&quot;https://i.stack.imgur.com/digfr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/digfr.jpg&quot; alt=&quot;System spcs&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24876" LastEditorUserId="24876" LastEditDate="2021-01-14T15:30:48.260" LastActivityDate="2021-01-14T15:30:48.260" Title="Wrong driver for Radeon 2600 HD" Tags="|release-hera|graphic-drivers|macintosh|radeon|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26291" PostTypeId="1" CreationDate="2021-01-13T11:06:01.390" Score="0" ViewCount="192" Body="&lt;p&gt;So to first give you a bit of information: This is the first time im trying to use Linux. Im using a Razer Blade Stealth 2020 with an i7-10th Gen processor and an Nvidia GTX 1650ti Super-Max-Q.&lt;/p&gt;&#xA;&lt;p&gt;I downloaded EOS (5.1.7 Hera) and made a bootable usb-drive via Rufus. Now on startup, when choosing to boot from the usb-stick I get the following lines of code on a black screen (right after I see that EOS will boot in 10 sec.)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[   0.155052] DMAR: DRHD: handling fault status reg 2&#xA;[   0.155061] DMAR: [DMA Write] Request device [57:00.0] PASID ffffffff fault a &#xA;ddr 0 [fault reason 05] PTE Write access is not set&#xA;[   0.3397271] ACPI Error: No handler for Region [VRTC] (0000000052591dcd) [Syst&#xA;emCMOS] (20190816/evregion-132)&#xA;[   0.339735] ACPI Error: Region SystemCMOS (ID=5) has no handler (20190816/exf&#xA;ldio-265)&#xA;[   0.339745] ACPI Error: Aborting method \_SB.PC10.LPCB.ECO.RTEC due to previo&#xA;us error (AE_NOT_EXIST) (20190816/psparse-531)&#xA;[   0.339752] ACPI Error: Aborting method \_SB.PC10.LPCB.ECO._REC due to previo&#xA;us error (AE_NOT_EXIST) (20190816/psparse-531)&#xA;[   2.357090] ima: Error Communicating to TPM chip&#xA;[   2.357529] ima: Error Communicating to TPM chip&#xA;[   2.357967] ima: Error Communicating to TPM chip&#xA;[   2.358399] ima: Error Communicating to TPM chip&#xA;[   2.357832] ima: Error Communicating to TPM chip&#xA;[   2.359265] ima: Error Communicating to TPM chip&#xA;[   2.359697] ima: Error Communicating to TPM chip&#xA;[   2.360130] ima: Error Communicating to TPM chip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I figured that the last lines regarding the tpm chip can be resolved by deactivating secure boot and some tpm-specific settings in BIOS. However even then the first lines will still appear, just without the error codelines for the tpm chip. EOS will still not boot.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have any idea how I can resolve this and get EOS to boot?&lt;/p&gt;&#xA;&lt;p&gt;Thank you very much in advance!&lt;/p&gt;&#xA;" OwnerUserId="24885" LastEditorUserId="24885" LastEditDate="2021-01-13T19:03:08.933" LastActivityDate="2024-02-01T21:01:30.210" Title="USB Boot Issue on Razer Blade Stealth 2020" Tags="|system-installation|laptop|intel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26293" PostTypeId="1" CreationDate="2021-01-13T14:40:27.630" Score="0" ViewCount="70" Body="&lt;p&gt;I've installed Elementary OS 5.1 on my MacBook Air 7,2.&#xA;The problem is that the &amp;quot;Suspend&amp;quot; function does not work whether selected from the menu or by closing the lid. In both cases, the computer does not go into suspend.&#xA;When the lid is closed, the Apple sign remains lit and the computer beeps every now and then, after reopening then login is shown.&#xA;When selected via Menu the the screen becomes black but immediately shows the login again.&lt;/p&gt;&#xA;" OwnerUserId="24887" LastEditorUserId="15904" LastEditDate="2021-01-15T05:59:49.207" LastActivityDate="2024-01-30T13:07:25.983" Title="MacBook Air 7,2 suspend does not work" Tags="|release-hera|suspend|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26298" PostTypeId="1" CreationDate="2021-01-14T10:58:50.123" Score="0" ViewCount="66" Body="&lt;p&gt;I wake up the computer (desktop PC, not laptop) by pressing a key, the login screen appears. The moment I want to enter the password, the computer shuts down. What is wrong here?&lt;/p&gt;&#xA;" OwnerUserId="24672" LastActivityDate="2024-01-29T22:03:50.413" Title="Computer shuts down after waking from sleep mode" Tags="|suspend|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26300" PostTypeId="1" CreationDate="2021-01-14T12:45:58.937" Score="0" ViewCount="528" Body="&lt;p&gt;elementaryos-6.0-daily.20210113.iso&lt;/p&gt;&#xA;&lt;p&gt;A hardware error occurs during installation and the installation does not complete.&lt;/p&gt;&#xA;&lt;p&gt;Redmibook-13R&#xA;R7 4700U&#xA;Vega 7&#xA;16 gb&#xA;1TB Nvme Intel Optain 660p &lt;img src=&quot;https://i.stack.imgur.com/vjjg6.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Update: Rufus and elementaryos-6.0-daily.20210114.iso helped me&lt;/p&gt;&#xA;" OwnerUserId="24894" LastEditorUserId="24894" LastEditDate="2021-01-14T20:15:03.140" LastActivityDate="2021-05-08T17:23:01.147" Title="Cannot install Elementary OS 6" Tags="|elementary-project|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="26301" PostTypeId="2" ParentId="26298" CreationDate="2021-01-14T12:49:10.250" Score="0" Body="&lt;p&gt;More info needed. After reboot finished, check:&#xA;dmesg -T  --level=err,warn&#xA;Post output here.&lt;/p&gt;&#xA;&lt;p&gt;Also post output of:&#xA;cat /proc/swaps&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-14T12:49:10.250" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26302" PostTypeId="2" ParentId="26293" CreationDate="2021-01-14T13:02:55.003" Score="0" Body="&lt;p&gt;You can set laptop lid action in:&#xA;/etc/systemd/logind.conf&lt;/p&gt;&#xA;&lt;p&gt;Try to set&#xA;#HandleLidSwitch=suspend&#xA;to&#xA;HandleLidSwitch=suspend&lt;/p&gt;&#xA;&lt;p&gt;then:&#xA;systemctl restart systemd-logind&lt;/p&gt;&#xA;&lt;p&gt;Also, do you have swap:&#xA;cat /proc/swaps&lt;/p&gt;&#xA;&lt;p&gt;Sometimes suspend options are available in bios/efi. Might have a look there.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-14T13:02:55.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26305" PostTypeId="2" ParentId="19346" CreationDate="2021-01-14T13:30:56.210" Score="0" Body="&lt;p&gt;Is the laptop on battery when suspending? or is it also happening when on power?&lt;/p&gt;&#xA;&lt;p&gt;Try to disable suspend in:&#xA;/etc/systemd/sleep.conf&lt;/p&gt;&#xA;&lt;p&gt;Set&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#AllowSuspend=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;AllowSuspend=yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-14T13:30:56.210" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26306" PostTypeId="2" ParentId="17895" CreationDate="2021-01-14T13:41:56.737" Score="0" Body="&lt;p&gt;You could try:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cat &amp;gt; /etc/modprobe.d/nvidia.conf &amp;lt;&amp;lt; EOF&#xA;options nvidia_drm modeset=1&#xA;EOF&#xA;&#xA;sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;See also:&#xA;&lt;a href=&quot;https://www.cmscritic.com/stop-screen-tearing-with-optimus-laptops-using-nvidia-drivers-in-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.cmscritic.com/stop-screen-tearing-with-optimus-laptops-using-nvidia-drivers-in-linux/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.debian.org/NVIDIA%20Optimus&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.debian.org/NVIDIA%20Optimus&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-14T13:41:56.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26308" PostTypeId="2" ParentId="26298" CreationDate="2021-01-14T15:19:34.270" Score="0" Body="&lt;p&gt;Hello @odin thank you for the answer. Here are the outputs:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;cat /proc/swaps&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Filename&lt;/strong&gt; /dev/dm-1 &lt;strong&gt;Type&lt;/strong&gt; partition &lt;strong&gt;Size&lt;/strong&gt; 999420 &lt;strong&gt;Used&lt;/strong&gt; 0 &lt;strong&gt;Priority&lt;/strong&gt; -2&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;dmesg -T --level=err,warn&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://share.anoxinon.de/f.php?h=3Uur4TS_beLbGnBfhyosii&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24672" LastActivityDate="2021-01-14T15:19:34.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26309" PostTypeId="2" ParentId="26291" CreationDate="2021-01-14T18:31:42.803" Score="0" Body="&lt;p&gt;quote:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;As I've learned, the error is because dmar tables or my BIOS are&#xA;broken..&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=176398&quot; rel=&quot;nofollow noreferrer&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Maybe try Firmware Test Suite &amp;gt; &lt;a href=&quot;https://wiki.ubuntu.com/FirmwareTestSuite/Reference/dmar&quot; rel=&quot;nofollow noreferrer&quot;&gt;dmar test&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;More &lt;a href=&quot;https://github.com/linuxkit/linux/blob/master/Documentation/Intel-IOMMU.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;info&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-14T18:31:42.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26311" PostTypeId="1" CreationDate="2021-01-14T21:56:50.017" Score="0" ViewCount="484" Body="&lt;p&gt;I added a newer version of kernels but when running advanced options with start system it shows only 5.4.0, with which elementary was installed&lt;/p&gt;&#xA;&lt;p&gt;(&lt;a href=&quot;https://i.stack.imgur.com/fvdD3.png!&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/fvdD3.png!&lt;/a&gt;)&#xA;(&lt;a href=&quot;https://i.stack.imgur.com/qQTIP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/qQTIP.jpg&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;p&gt;Update: Add boot list screenshot&lt;a href=&quot;https://i.stack.imgur.com/hh8ai.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hh8ai.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Update: amdgpu hardware error.&#xA;There are no problems in the official last version of Ubuntu.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Omlkj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Omlkj.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24894" LastEditorUserId="24894" LastEditDate="2021-01-15T14:52:31.183" LastActivityDate="2024-01-30T21:04:35.560" Title="Grub 2.04 (Elementary OS 6)" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26312" PostTypeId="1" CreationDate="2021-01-15T00:46:42.783" Score="1" ViewCount="855" Body="&lt;p&gt;I have an old, white MacBook. Not sure if that is a 2009 or 2010 model, but I think it is the 2010 model. It has no macOS installed anymore (the partition was deleted) and as it cannot run any current macOS version to begin with (I think 10.11 is the last one it could run), I tried to install elementary OS on it instead.&lt;/p&gt;&#xA;&lt;p&gt;I downloaded 5.1.7 Hera, made a bootable USB stick and was able to boot from the USB stick without issues. I ran the installer and everything seem to be working fine. Except when I try to boot the installed system, I only get a very dark gray screen, then after a short while a black screen, and nothing else happens. No boot logo, no boot menu, and the system does not react to any keyboard input (e.g. &lt;code&gt;CTRL+ALT+FN+F1&lt;/code&gt; does nothing).&lt;/p&gt;&#xA;&lt;p&gt;I can only open the GRUB prompt by pressing &lt;code&gt;ESC&lt;/code&gt; during boot but I don't know what to do there. I tried to boot in recovery mode but that only shows more boot messages and finally also ends up in a black screen.&lt;/p&gt;&#xA;&lt;p&gt;In an attempt to work around, I downloaded rEFInd and made a bootable USB stick from it. I can boot into the rEFInd boot menu without problems. There I can choose to boot either&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;EFI\ubuntu\grubx64.efi&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;which shortly displays some text on screen, so that's more than when booting without rEFInd, but no GRUB boot menu and it's displayed way too short to be readable. After that the same behavior as before.&lt;/p&gt;&#xA;&lt;p&gt;Or I can choose to boot&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;boot/vmlinuz-5.4.0-60-generic&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;which shows the normal text messages of a booting Linux kernel, so it seems the kernel is loading and initializing just fine, followed by text output of system services starting (looks familiar if you know other Linux systems - I guess these are from systemd) but at the end, the screen goes black again and that's it.&lt;/p&gt;&#xA;&lt;p&gt;rEFInd allows me to pass boot options to either GRUB or the Linux kernel.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I tried to pass &lt;code&gt;nomodeset&lt;/code&gt; to either one, no effect.&lt;/li&gt;&#xA;&lt;li&gt;I tried to pass &lt;code&gt;nouveau.modeset=0&lt;/code&gt; to either one, no effect.&lt;/li&gt;&#xA;&lt;li&gt;I tried to pass the following to either one, without any effect: &lt;code&gt;i8042.nomux=1 i8042.reset i915.lvds_channel_mode=2 i915.modeset=1 i915.lvds_use_ssc=0&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;These are all the solutions I found here when searching for similar problems yet none of these worked. I'm somehow lost.&lt;/p&gt;&#xA;&lt;p&gt;Note that I can run the live system without any problems, so if you want me to boot into that system and perform some commands to get further debug info or to change the installed system, this is no problem. As you may have noticed, I'm very tech-savvy but not an expert for debugging Linux boot issues.&lt;/p&gt;&#xA;&lt;h2&gt;Update&lt;/h2&gt;&#xA;&lt;p&gt;Without &lt;code&gt;quiet splash&lt;/code&gt; in GRUB I get the same behavior as when using rEFInd and directly boot &lt;code&gt;boot/vmlinuz-5.4.0-60-generic&lt;/code&gt;: I see the kernel boot messages, I see systemd starting up services (no indication of any start up failure) and then the screen goes black and that's it. Everything is displayed way too short to be captured or even read.&lt;/p&gt;&#xA;&lt;p&gt;I suspect the problem is the graphics driver. It seem that the system freezes the moment it tries to bring up a graphical UI. Not only it will fail to bring up this mode, it also kills the keyboard somehow and thus no shortcuts work (like switching to a text console again).&lt;/p&gt;&#xA;&lt;p&gt;Is there a way not to boot into graphical UI to debug, read logs or try different configs? I read somewhere that you can add a legacy run level at the end of the config string in Ubuntu and when you add &lt;code&gt;3&lt;/code&gt; after all options, you are not booting into UI mode but this doesn't seem to work for me, I still get a black screen that way.&lt;/p&gt;&#xA;" OwnerUserId="12143" LastEditorUserId="12143" LastEditDate="2021-01-17T14:16:36.567" LastActivityDate="2021-02-09T11:43:37.173" Title="Can install on white MacBook (2010) but boot only shows black screen" Tags="|release-hera|boot|macbook|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26314" PostTypeId="2" ParentId="26311" CreationDate="2021-01-15T08:01:08.543" Score="0" Body="&lt;p&gt;Updated your grub with update-grub?&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;edit&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;So in /boot/grub/grub.cfg the kernels are stated in the menu list?&lt;/p&gt;&#xA;&lt;p&gt;Also, when running update-grub, output shows kernel's like so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Generating grub configuration file ...  &#xA;Found linux image: /boot/vmlinuz-5.0.0-37-generic  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Are the installed kernels shown?&lt;/p&gt;&#xA;&lt;p&gt;The following should be sufficient:&lt;br /&gt;&#xA;&lt;code&gt;update-initramfs -c -k all&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;update-grub or grub-mkconfig -o /boot/grub/grub.cfg&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;When no succes, you could try:&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/Boot-Repair&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastEditorUserId="24893" LastEditDate="2021-01-15T14:03:25.247" LastActivityDate="2021-01-15T14:03:25.247" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26315" PostTypeId="1" CreationDate="2021-01-15T10:15:20.050" Score="0" ViewCount="147" Body="&lt;p&gt;After updating system today my top menu disapeared. The update acted wierd and had issues loading when i tried to run it from app center. I restarted the machine and it resulted in the top menu vanished.&lt;/p&gt;&#xA;&lt;p&gt;After attempting to fix the problem (by my limited computer skills) here is what came out of my terminal.&lt;/p&gt;&#xA;&lt;p&gt;sigbjorn@Office:~$ wingpanel &amp;amp;&#xA;[1] 3553&#xA;sigbjorn@Office:~$&#xA;(wingpanel:3553): GLib-GIO-ERROR **: 10:58:16.596: Settings schema 'io.elementary.wingpanel.keyboard' is not installed&lt;/p&gt;&#xA;&lt;p&gt;[1]+  Trace/breakpoint trap   wingpanel&#xA;sigbjorn@Office:~$ sudo apt-get --reinstall install wingpanel&#xA;[sudo] password for sigbjorn:&lt;br /&gt;&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br /&gt;&#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA;linux-modules-extra-5.4.0-52-generic : Depends: linux-image-5.4.0-52-generic but it is not going to be installed or&#xA;linux-image-unsigned-5.4.0-52-generic but it is not going to be installed&#xA;linux-modules-extra-5.4.0-53-generic : Depends: linux-image-5.4.0-53-generic but it is not going to be installed or&#xA;linux-image-unsigned-5.4.0-53-generic but it is not going to be installed&#xA;linux-modules-extra-5.4.0-54-generic : Depends: linux-image-5.4.0-54-generic but it is not going to be installed or&#xA;linux-image-unsigned-5.4.0-54-generic but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;sigbjorn@Office:~$ apt --fix-broken install&#xA;E: Could not open lock file /var/lib/dpkg/lock-frontend - open (13: Permission denied)&#xA;E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), are you root?&lt;/p&gt;&#xA;" OwnerUserId="24898" LastActivityDate="2024-01-31T01:00:20.033" Title="wingpanel disapeared after updating" Tags="|updates|wingpanel|appcenter|slingshot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26316" PostTypeId="2" ParentId="26315" CreationDate="2021-01-15T14:09:59.430" Score="0" Body="&lt;p&gt;Seems u got some broken Packages.&#xA;Open a terminal and try fixes mentioned &lt;a href=&quot;https://www.maketecheasier.com/fix-broken-packages-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When app store is without error and wingpanel is still missing, try:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install wingpanel-indicator-keyboard&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-15T14:09:59.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26317" PostTypeId="2" ParentId="26312" CreationDate="2021-01-15T14:16:03.343" Score="0" Body="&lt;p&gt;Since boot does not halt at grub, your os is booting. Since its mac and all, i expect (gpu) driver faults.&lt;/p&gt;&#xA;&lt;p&gt;You might try esc or f2 when booting to switch from the splash screen to boot output text. This might show where it fails.&lt;/p&gt;&#xA;&lt;p&gt;Otherwise try in the grub prompt to remove the &lt;code&gt;quiet splash&lt;/code&gt; entries.&lt;/p&gt;&#xA;&lt;p&gt;Post any output you might find back here.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-15T14:16:03.343" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26318" PostTypeId="1" CreationDate="2021-01-15T17:15:35.313" Score="0" ViewCount="53" Body="&lt;p&gt;I'm using elementary OS 5.1.7 Hera and Thunderbird 68.10.0.&lt;/p&gt;&#xA;&lt;p&gt;Since there's a &lt;a href=&quot;https://www.mozilla.org/en-US/security/advisories/mfsa2021-02/&quot; rel=&quot;nofollow noreferrer&quot;&gt;security warning on versions prior 78.6.1&lt;/a&gt; I tried to update, with no success.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;AppCenter has no updates for Thunderbird.&lt;/li&gt;&#xA;&lt;li&gt;After &lt;code&gt;apt update&lt;/code&gt; and &lt;code&gt;apt upgrade&lt;/code&gt; I tried &lt;code&gt;apt install --only-upgrade thunderbird&lt;/code&gt;, which resulted in a message saying Thunderbird was already the latest version (1:68.10.0+build1-0ubuntu0.18.04.1).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;What now? Any ideas?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance - Stefan&lt;/p&gt;&#xA;" OwnerUserId="24902" LastEditorUserId="15904" LastEditDate="2021-02-10T23:11:45.933" LastActivityDate="2021-02-10T23:11:45.933" Title="Thunderbird update not available" Tags="|release-hera|updates|security|thunderbird|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26320" PostTypeId="2" ParentId="373" CreationDate="2021-01-15T20:40:55.950" Score="0" Body="&lt;p&gt;Tested on elementary OS 5.1.7 Hera :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Open terminal&lt;/p&gt;&#xA;&lt;p&gt;sudo nano /usr/share/lightdm/lightdm.conf.d/40-io.elementary.greeter.conf&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;add this line at the end of the file :&lt;/p&gt;&#xA;&lt;p&gt;greeter-setup-script=/usr/bin/numlockx on&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;save (ctrl+o)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;quit nano (ctrl+x) and close the terminal&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;restart your computer and it supposed to work&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="24906" LastActivityDate="2021-01-15T20:40:55.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26323" PostTypeId="1" AcceptedAnswerId="26325" CreationDate="2021-01-16T15:17:26.683" Score="0" ViewCount="120" Body="&lt;p&gt;I'm a Full stack web &amp;amp; React developer. I want to use Linux as it is favored by many professionals but it lacks good design. I've heard Elementary OS has a good design. Should I use it?&lt;/p&gt;&#xA;" OwnerDisplayName="user24910" LastActivityDate="2021-01-31T17:40:21.403" Title="Should i use Elementary OS for developing applications?" Tags="|user|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26324" PostTypeId="1" CreationDate="2021-01-16T16:59:30.207" Score="0" ViewCount="425" Body="&lt;p&gt;For background, I'm new to Elementary OS, but have been using Linux (mostly Ubuntu) for over a decade as a casual user (not a power user). This is the first distro that I've installed on my desktop machine. Windows is incredibly stable on this machine, but I hate dev work in Windows.&lt;/p&gt;&#xA;&lt;p&gt;My issue is that I have encountered much more crashing and freezing than I have with other Linux experiences in the past. This primarily occurs daily, often when using Firefox. That said, I'm not sure if I can blame FF since I'm on it 95% of the time anyway.&lt;/p&gt;&#xA;&lt;p&gt;I don't want to abandon Firefox since I prefer how I have it customized. I'm open trying other Debian-based Distros (Mint or Ubuntu), but wonder if you can switch non-destructively since the underlying Debian kernal is the same. Although it seems unlikely that this issue is Elementary OS specific right?&lt;/p&gt;&#xA;&lt;p&gt;Any advice on what steps I should take to diagnose or fix this?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Hardware&lt;/strong&gt;&#xA;Quad-Core AMD Ryzen 3 2200G with Radeon Vega Graphics,&#xA;8GB Ram (too low, but broke my ram2 slot and with an M1 SSD things aren't that bad)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;OS&lt;/strong&gt;&#xA;elementary OS 5.1.7 Hera,&#xA;Built on Ubuntu 18.04.4 LTS,&#xA;Linux 5.4.0-58-generic,&#xA;GTK 3.22.30&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Browser&lt;/strong&gt;&#xA;Firefox 84.0, direct install&lt;/p&gt;&#xA;" OwnerUserId="24912" LastActivityDate="2024-01-19T21:08:15.967" Title="Resolving System Freezing / Crashes" Tags="|firefox|amd|crash|ryzen|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26325" PostTypeId="2" ParentId="26323" CreationDate="2021-01-16T21:11:16.543" Score="0" Body="&lt;p&gt;If you don't like other distros' UX/ergonomics then you won't like Elementary OS. If your issue is more aesthetic then you might like Elementary OS. The polish is largely surface level, but the core applications and feel are going to be reminiscent of other Debian based distros.&lt;/p&gt;&#xA;&lt;p&gt;I, for one, can't stand development in Windows and don't choose to pay the Apple tax. I like Ubuntu, Mint, and Elementary for user-friendly distros.&lt;/p&gt;&#xA;" OwnerUserId="24912" LastActivityDate="2021-01-16T21:11:16.543" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26326" PostTypeId="1" CreationDate="2021-01-16T21:19:08.240" Score="0" ViewCount="52" Body="&lt;p&gt;I'm on Eos 5.1.7 Hera, and when I click a notification in the list it doesn't open. It's the same problem with every app. I've noticed there's no matter openning it by clicking on the bubble when showing.&lt;/p&gt;&#xA;" OwnerUserId="24914" LastActivityDate="2024-02-01T19:05:45.680" Title="Notifications don't open" Tags="|release-hera|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26327" PostTypeId="2" ParentId="26326" CreationDate="2021-01-17T09:43:11.950" Score="0" Body="&lt;p&gt;Afaik it is expected behavior:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;..soon we will be able to support notifications with buttons so you&#xA;can take action quickly without having to navigate away from the&#xA;things you’re focused on.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;From:  &lt;a href=&quot;https://blog.elementary.io/platform-changes-in-elementary-os-6/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Platform Changes in elementary OS 6&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-17T09:43:11.950" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26328" PostTypeId="1" CreationDate="2021-01-17T13:01:35.267" Score="0" ViewCount="250" Body="&lt;p&gt;eOS Hera, I have the following problem:&#xA;The graphics tablet (256c:006d) works in principle, but since I use two monitors, drawings are heavily distorted.&lt;/p&gt;&#xA;&lt;p&gt;I can not configure the tablet because the output of xsetwacom is empty.&lt;/p&gt;&#xA;&lt;p&gt;I've installed libwacom, therefore.&lt;/p&gt;&#xA;&lt;p&gt;libwacom-list-local-devices&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Device node: /dev/input/event258&#xA;[Device]&#xA;Name=GAOMON S620&#xA;ModelName=&#xA;DeviceMatch=usb:256c:006d:GAOMON Gaomon Tablet Pen;usb:256c:006d:GAOMON Gaomon Tablet Pad;&#xA;Class=Bamboo&#xA;Width=6&#xA;Height=4&#xA;IntegratedIn=&#xA;Layout=gaomon-s620.svg&#xA;Styli=0xffffd;&#xA;&#xA;[Features]&#xA;Reversible=true&#xA;Stylus=true&#xA;Ring=false&#xA;Ring2=false&#xA;Touch=false&#xA;TouchSwitch=false&#xA;# StatusLEDs=&#xA;NumStrips=0&#xA;Buttons=4&#xA;&#xA;[Buttons]&#xA;Left=A;B;C;D;&#xA;# Right=&#xA;# Top=&#xA;# Bottom=&#xA;# Touchstrip=&#xA;# Touchstrip2=&#xA;# OLEDs=&#xA;# Ring=&#xA;# Ring2=&#xA;EvdevCodes=0x100;0x101;0x102;0x103;&#xA;RingNumModes=0&#xA;Ring2NumModes=0&#xA;StripsNumModes=0&#xA;&#xA;---------------------------------------------------------------&#xA;# Device node: /dev/input/event257&#xA;[Device]&#xA;Name=GAOMON S620&#xA;ModelName=&#xA;DeviceMatch=usb:256c:006d:GAOMON Gaomon Tablet Pen;usb:256c:006d:GAOMON Gaomon Tablet Pad;&#xA;Class=Bamboo&#xA;Width=6&#xA;Height=4&#xA;IntegratedIn=&#xA;Layout=gaomon-s620.svg&#xA;Styli=0xffffd;&#xA;&#xA;[Features]&#xA;Reversible=true&#xA;Stylus=true&#xA;Ring=false&#xA;Ring2=false&#xA;Touch=false&#xA;TouchSwitch=false&#xA;# StatusLEDs=&#xA;NumStrips=0&#xA;Buttons=4&#xA;&#xA;[Buttons]&#xA;Left=A;B;C;D;&#xA;# Right=&#xA;# Top=&#xA;# Bottom=&#xA;# Touchstrip=&#xA;# Touchstrip2=&#xA;# OLEDs=&#xA;# Ring=&#xA;# Ring2=&#xA;EvdevCodes=0x100;0x101;0x102;0x103;&#xA;RingNumModes=0&#xA;Ring2NumModes=0&#xA;StripsNumModes=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It's also listed as a pointing device:&lt;/p&gt;&#xA;&lt;p&gt;xinput --list&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer id=2 [master pointer (3)]&#xA;⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]&#xA;⎜ ↳ Paten USB Gaming Mouse id=11 [slave pointer (2)]&#xA;⎜ ↳ Contour Design ShuttleXpress id=12 [slave pointer (2)]&#xA;⎜ ↳ HID 0566:3013 Consumer Control id=15 [slave pointer (2)]&#xA;⎜ ↳ GAOMON Gaomon Tablet Pen Pen (0) id=22 [slave pointer (2)]&#xA;⎣ Virtual core keyboard id=3 [master keyboard (2)]&#xA;↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]&#xA;↳ Power Button id=6 [slave keyboard (3)]&#xA;↳ Video Bus id=7 [slave keyboard (3)]&#xA;↳ Power Button id=8 [slave keyboard (3)]&#xA;↳ Sleep Button id=9 [slave keyboard (3)]&#xA;↳ GAOMON Gaomon Tablet Pen id=10 [slave keyboard (3)]&#xA;↳ Contour Design ShuttleXpress id=20 [slave keyboard (3)]&#xA;↳ HID 0566:3013 System Control id=16 [slave keyboard (3)]&#xA;↳ HID 0566:3013 id=13 [slave keyboard (3)]&#xA;↳ HID 0566:3013 Consumer Control id=21 [slave keyboard (3)]&#xA;↳ HID 0566:3013 id=14 [slave keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have installed &lt;a href=&quot;https://github.com/elementary/switchboard-plug-wacom&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-wacom&lt;/a&gt;&#xA;But I still cannot configure the tablet. :-(&lt;/p&gt;&#xA;&lt;p&gt;What is my thinking error?&lt;/p&gt;&#xA;&lt;p&gt;TIA&#xA;Cheers&#xA;Mierscheid&lt;/p&gt;&#xA;" OwnerUserId="24918" LastEditorUserId="15904" LastEditDate="2021-01-22T10:39:32.700" LastActivityDate="2024-02-23T12:05:00.580" Title="Gaomon S620 configuration?" Tags="|release-hera|settings|tablet|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26330" PostTypeId="2" ParentId="26291" CreationDate="2021-01-17T15:36:16.003" Score="0" Body="&lt;p&gt;I dont know how or why but I was now able to boot from usb and install. Only issue now is that none of my audio input or output devices are regocnized&lt;/p&gt;&#xA;" OwnerUserId="24885" LastActivityDate="2021-01-17T15:36:16.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26333" PostTypeId="2" ParentId="3042" CreationDate="2021-01-18T07:45:58.607" Score="0" Body="&lt;p&gt;I'm stuck on the login form too. I just installed Elementary and this is my very first login attempt. I already checked my &lt;code&gt;.Xauthority&lt;/code&gt; file: it is property of my personal user (not root). I also reinstalled &lt;code&gt;lightdm&lt;/code&gt; but nothing changed. Someone has an hint for a linux noob like me? :D Thanks a lot&lt;/p&gt;&#xA;" OwnerUserId="24924" LastActivityDate="2021-01-18T07:45:58.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26334" PostTypeId="1" CreationDate="2021-01-18T19:22:13.640" Score="2" ViewCount="136" Body="&lt;p&gt;I have a question about how notifications work in Elementary OS 5.1.7 Hera.&lt;/p&gt;&#xA;&lt;p&gt;I have multiple apps installed like Slack and Spotify and I really need to see the ones from Slack but want to hide those from Spotify.&lt;/p&gt;&#xA;&lt;p&gt;By default when I install Spotify from flathub, there is Spotify icon in notification centre so I can suppress Spotify notifs. The strange thing is, that they also appear duplicated under &amp;quot;other&amp;quot; so I need to also disable notifications from all other apps.&lt;/p&gt;&#xA;&lt;p&gt;Slack from flathub does not show in notifications until I edit &lt;code&gt;/home/tomasz/.local/share/flatpak/exports/share/applications/com.slack.Slack.desktop&lt;/code&gt; and add &lt;code&gt;X-GNOME-UsesNotifications=true&lt;/code&gt;. That shows controls for Slack in notification center but even if I enable everything there, the notifications are still under &amp;quot;other&amp;quot; and I need to silence those to not get ones from Spotify.&lt;/p&gt;&#xA;&lt;p&gt;What can I do to tell Elementary that this app produces those notifications so I can configure them properly? Are there any other magic lines &lt;code&gt;.desktop&lt;/code&gt; files?&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2021-01-18T19:22:13.640" Title="How notification system works in Elementary OS 5?" Tags="|notifications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26335" PostTypeId="2" ParentId="1282" CreationDate="2021-01-19T04:37:17.420" Score="0" Body="&lt;p&gt;I know this is an old thread, however, it might still pop up.  If you connect using &amp;quot;X2Go/X11 Desktop Sharing&amp;quot; it will render the 'Console&amp;quot; view or the same view that is seen when you log into the computer physically.&lt;/p&gt;&#xA;&lt;p&gt;Session Type Settings:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QHotl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QHotl.png&quot; alt=&quot;Session Type Settings screen shot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;For your viewing pleasure:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/db8BO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/db8BO.png&quot; alt=&quot;Screenshot of the Running Desktop&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24927" LastActivityDate="2021-01-19T04:37:17.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26336" PostTypeId="2" ParentId="26256" CreationDate="2021-01-19T10:04:50.013" Score="0" Body="&lt;p&gt;Dave, Elementary os is very secure, all the security updates are passed on as soon as they are released, Linux in general is more secure than windows.&#xA;But please remember to still be safe on the net, don't go to risky sites.&lt;/p&gt;&#xA;&lt;p&gt;Jeff&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2021-01-19T10:04:50.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26337" PostTypeId="2" ParentId="26323" CreationDate="2021-01-19T10:10:05.427" Score="0" Body="&lt;p&gt;If I was you I would download a heap of different distros to live USB sticks and just boot each one at a time and find the one you like best. Most of them work in a very simular way.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2021-01-19T10:10:05.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26338" PostTypeId="2" ParentId="2536" CreationDate="2021-01-20T10:00:03.910" Score="0" Body="&lt;p&gt;Might be a problem with Parallels being so old, I have Parallels 16 and I think it is now up to 17.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastActivityDate="2021-01-20T10:00:03.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26339" PostTypeId="1" CreationDate="2021-01-20T10:30:53.353" Score="0" ViewCount="60" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RQIkt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RQIkt.jpg&quot; alt=&quot;this is what it looks like when i run an mp4 file&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;im not sure how to get logs or code and stuff as im new to linux but i really need help. this isn't the file because i have tried it will multiple files and i've tried those files on other devices.&#xA;any help is much appreciated :)&lt;/p&gt;&#xA;" OwnerUserId="24931" LastActivityDate="2024-02-07T01:01:15.173" Title="video won't play in correct colours" Tags="|videos|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26340" PostTypeId="1" AcceptedAnswerId="26566" CreationDate="2021-01-20T13:50:31.717" Score="0" ViewCount="85" Body="&lt;p&gt;I have an idea for an application that should help with backups. I came up with the idea after talking with my dad. He is very fond of his data and likes to create backups. But, being a silver surfer with only limited english knowledge many backup programs are too difficult for him to use.&lt;/p&gt;&#xA;&lt;p&gt;His workflow now is mainly:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Plugging a USB hard drive&lt;/li&gt;&#xA;&lt;li&gt;remembering what to back up&lt;/li&gt;&#xA;&lt;li&gt;copy &amp;amp; paste the data onto the hard drive&lt;/li&gt;&#xA;&lt;li&gt;clicking away any notifications about existing files&lt;/li&gt;&#xA;&lt;li&gt;hoping the copy process runs sucessfully&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I thought that there must be an easier way to this. And there is: UDEV rules allow to target specific (usb) devices and run scripts on add or remove events. However, there is one caveat: You must be proficient with UDEV rules &amp;amp; scripting. This is when and why I came up with an idea for an app.&lt;/p&gt;&#xA;&lt;p&gt;So, the app would essentially be a frontend that matches hardware devices to a backup action. The user selects a device and attaches one (or more) actions to it. The udev rules should be written automatically to the correct folder when saved.&lt;/p&gt;&#xA;&lt;p&gt;Other software I have considered:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Déjà Dup&lt;/li&gt;&#xA;&lt;li&gt;fwbackups&lt;/li&gt;&#xA;&lt;li&gt;Grsync&lt;/li&gt;&#xA;&lt;li&gt;Timeshift&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;None of them allows for my dads use case: Plug in the hard drive and wait for a success notification.&lt;/p&gt;&#xA;&lt;p&gt;Do you think this is a good idea for an application that many people would use?&lt;/p&gt;&#xA;" OwnerUserId="16007" LastActivityDate="2021-02-22T13:18:08.920" Title="Idea for a backup application" Tags="|applications|backup|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26342" PostTypeId="2" ParentId="13988" CreationDate="2021-01-20T15:39:50.427" Score="4" Body="&lt;p&gt;I encountered the same problem today. After a number of searches on the Stack Overflow site, no desired solution was found. However, I found a solution after searching on a Chinese website, and below are the solution:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /var/lib/dpkg&#xA;sudo mv info info.bak&#xA;sudo mkdir info&#xA;sudo apt-get upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Ref &lt;a href=&quot;http://cd%20/var/lib/dpkg%20sudo%20mv%20info%20info.bak%20sudo%20mkdir%20info%20sudo%20apt-get%20upgrade&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24934" LastActivityDate="2021-01-20T15:39:50.427" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26346" PostTypeId="1" CreationDate="2021-01-20T17:41:06.587" Score="0" ViewCount="162" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TKEpq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TKEpq.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When I am turning on the laptop, my screen shows the only attachment image.&lt;/p&gt;&#xA;&lt;p&gt;And Ctrl+Alt+F1 also not working.&lt;/p&gt;&#xA;&lt;p&gt;it that any way to rest my ELEMENTARY OS&lt;/p&gt;&#xA;" OwnerUserId="24936" LastActivityDate="2024-03-08T11:07:45.853" Title="elementary os not booting or login Screen not Display" Tags="|boot|display|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26347" PostTypeId="2" ParentId="26346" CreationDate="2021-01-20T21:20:07.893" Score="0" Body="&lt;p&gt;Try to remove the &amp;quot;splash guiet&amp;quot; flags in the grub entry on boot to see boot logging output to see possible errors.&lt;/p&gt;&#xA;&lt;p&gt;Get to edit grub entry by pressing one of those&#xA;&lt;a href=&quot;https://www.omgubuntu.co.uk/2016/07/key-to-show-grub-menu-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.omgubuntu.co.uk/2016/07/key-to-show-grub-menu-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastEditorUserId="25864" LastEditDate="2021-06-22T06:32:10.877" LastActivityDate="2021-06-22T06:32:10.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26348" PostTypeId="2" ParentId="3042" CreationDate="2021-01-20T22:54:55.837" Score="0" Body="&lt;p&gt;Like PierPaolo Zus, I have the same problem right now. It happened a few days ago after installing updates. I guess something in the update broke lightdm.&lt;/p&gt;&#xA;&lt;p&gt;I have tried all the things proposed here.&lt;/p&gt;&#xA;&lt;p&gt;What I did as a workaround is that I installed kde-full and sddm and then I use sddm as login manager and KDE as desktop environment. This is NOT a real solution. But it is a workaround that allows me to use my computer again.&lt;/p&gt;&#xA;&lt;p&gt;I hope someone knows how to actually fix this.&lt;/p&gt;&#xA;" OwnerUserId="24939" LastActivityDate="2021-01-20T22:54:55.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26349" PostTypeId="2" ParentId="25581" CreationDate="2021-01-21T08:14:19.513" Score="0" Body="&lt;p&gt;Do this following command. It will resolve the problem&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-add-repository -r ppa:cybre/elementaryplus&lt;/p&gt;&#xA;" OwnerUserId="24940" LastActivityDate="2021-01-21T08:14:19.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26350" PostTypeId="2" ParentId="26339" CreationDate="2021-01-21T12:04:24.440" Score="0" Body="&lt;p&gt;Mayeb install some media codecs:&lt;br /&gt;&#xA;&lt;code&gt;apt install ubuntu-restricted-extras libavcodec-extra&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-21T12:04:24.440" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26352" PostTypeId="1" CreationDate="2021-01-21T16:30:20.513" Score="0" ViewCount="130" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fXdnC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fXdnC.png&quot; alt=&quot;How to clean up multiple Nvidia drivers in Hera.&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I saw that these were &amp;quot;free&amp;quot; in the AppCenter, so I clicked on them all. The next boot resulted in the black screen several people experience. I managed to (finally) get back to a working system, but don't ask me how. So, (1) is it possible to get rid of them from the list shown in the figure and (2) how do I know if I am using the best driver for my video card (Nvidia GEForce GTX 570)  Thanks&lt;/p&gt;&#xA;" OwnerUserId="24946" LastActivityDate="2024-02-10T21:07:55.990" Title="Hera: Multiple Nvidia drivers installed (?) How to clean up" Tags="|nvidia|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26355" PostTypeId="2" ParentId="26346" CreationDate="2021-01-21T18:07:28.983" Score="0" Body="&lt;p&gt;Just after the BIOS splash screen comes up, where you are told to hit Del, F2, F3 whatever to get to the BIOS) press ESC several times. That will allow you to a SAFE or RESTORE mode.&lt;/p&gt;&#xA;" OwnerUserId="24946" LastActivityDate="2021-01-21T18:07:28.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26357" PostTypeId="2" ParentId="26352" CreationDate="2021-01-21T20:33:59.463" Score="0" Body="&lt;p&gt;The following command will remove the proprietary Nvidia driver:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -P $(dpkg -l | grep nvidia-driver | awk '{print $2}')&#xA;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will install most recent nvidia driver&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24893" LastEditorUserId="24893" LastEditDate="2021-01-22T08:13:01.377" LastActivityDate="2021-01-22T08:13:01.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26359" PostTypeId="1" CreationDate="2021-01-22T17:34:43.653" Score="0" ViewCount="375" Body="&lt;p&gt;So on pop!_OS I was pulling 275 Mbs yesterday. I switched to elementary and now can’t load the webpage that I did my initial speed test on yesterday because my browser is that bad. I’ll probably have to go back to pop! because this is going to be impossible to get through school with, but are there any simple fixes for this?&lt;/p&gt;&#xA;&lt;p&gt;My rig: 2019 Razer blade stealth 13&#xA;Processor: intel core i7-8565u 1.8ghz&#xA;Graphics: NVIDIA MX150&lt;/p&gt;&#xA;&lt;p&gt;Edit- did a speed test on google, 256 mbs, went to leave google, 34 seconds to load Reddit.&#xA;Also don’t know how much it matters but before switching OS’s I downloaded the most recent NVIDIA Graphics driver&lt;/p&gt;&#xA;" OwnerUserId="24950" LastActivityDate="2024-02-09T12:06:55.833" Title="Switched to Elementary OS last night, now my internet is insanely slow" Tags="|internet|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26360" PostTypeId="2" ParentId="26339" CreationDate="2021-01-22T19:43:18.750" Score="0" Body="&lt;p&gt;You can try typing this command in a terminal.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sudo apt-get remove gstreamer1.0-vaapi&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1030257/video-player-in-18-04-shows-a-psychedelic-mixture-instead-of-a-clear-video&quot;&gt;This&lt;/a&gt; is the solution that has worked for me.&lt;/p&gt;&#xA;" OwnerUserId="24433" LastActivityDate="2021-01-22T19:43:18.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26361" PostTypeId="2" ParentId="22635" CreationDate="2021-01-22T22:34:50.793" Score="0" Body="&lt;p&gt;Following these instructions I got my integrated cam to work. EOS Hera on MacBook Air 2013. Hope it helps.&#xA;&lt;a href=&quot;https://www.bountysource.com/issues/91429169-add-the-drivers-for-a-mac-book-facetimehd-camera&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.bountysource.com/issues/91429169-add-the-drivers-for-a-mac-book-facetimehd-camera&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24952" LastActivityDate="2021-01-22T22:34:50.793" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26362" PostTypeId="1" CreationDate="2021-01-23T04:57:04.483" Score="0" ViewCount="115" Body="&lt;p&gt;I am very, very new to Linux. I am taken aback at how upon installing elementaryOS I was immediately hit with a series of &amp;quot;updates&amp;quot; to various functionalities.&lt;/p&gt;&#xA;&lt;p&gt;How do I know these updates are safe? Or even what they did to my machine? How do I know there wasn't a MIM attack, or if my machine has been compromised with a keylogger or something? Is there a way to check whatever's going on my machine against some kind of &amp;quot;official&amp;quot; version?&lt;/p&gt;&#xA;&lt;p&gt;Sorry if this is an idiot question, I am new to all of this but I hear you can do that with opensource stuff?&lt;/p&gt;&#xA;" OwnerUserId="24954" LastActivityDate="2021-06-07T03:56:25.070" Title="Elementary OS Updates And Security" Tags="|security|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26363" PostTypeId="2" ParentId="26362" CreationDate="2021-01-23T10:10:23.430" Score="1" Body="&lt;p&gt;It's not a dumb question. If the updates were done through the App Store, it would be fine. You could also update using the command line console&lt;/p&gt;&#xA;&lt;p&gt;(this is the command)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Hope this helps you.&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="14940" LastEditDate="2021-06-07T03:56:25.070" LastActivityDate="2021-06-07T03:56:25.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26365" PostTypeId="1" CreationDate="2021-01-23T10:48:04.480" Score="0" ViewCount="28" Body="&lt;p&gt;I am learning to code following the instructions on the elementary website.&#xA;It said Create your root folder called &amp;quot;gtk-hello&amp;quot;&#xA;My question is how do I Create this?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for taking the time to read this.&lt;/p&gt;&#xA;&lt;p&gt;Jeff&lt;/p&gt;&#xA;" OwnerUserId="16508" LastEditorUserId="20782" LastEditDate="2021-06-07T03:48:08.337" LastActivityDate="2021-06-07T03:48:08.337" Title="Create your root folder called &quot;gtk-hello&quot;" Tags="|development|folder|root|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26366" PostTypeId="2" ParentId="17675" CreationDate="2021-01-23T11:08:24.297" Score="0" Body="&lt;p&gt;I have the same problem with my HP Officejet 5605z. This model is not featured by the above mentioned Hannah software. In another forum I read, that a user was able to solve the problem by uninstalling and reinstalling hplip. I did so. This did not initially solve my problem. However, in the installation log in the terminal it also says:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Vorgeschlagene Pakete:&#xA;hplip-doc hplip-gui python3-notify2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(German for recommended packages). I installed these, in particular to try the gui.&lt;/p&gt;&#xA;&lt;p&gt;Subsequently in the Elementary OS Apps searchbox it shows &amp;quot;HPLIP Toolbox&amp;quot;. This I opened.&lt;/p&gt;&#xA;&lt;p&gt;Here there is a guide showing on how to setup new devices, which I did. I was able to add my printer (was automatically recommended) and print a test page.&lt;/p&gt;&#xA;&lt;p&gt;Now I tried to go to my desired documents and print one of them. In the print wizzard there are now two additional entries, the middle one successfully prints my documents now.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mMPM7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mMPM7.png&quot; alt=&quot;print_wizzard&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24955" LastActivityDate="2021-01-23T11:08:24.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26367" PostTypeId="2" ParentId="26244" CreationDate="2021-01-23T11:16:27.400" Score="0" Body="&lt;p&gt;All the problems were after all caused by the wifi chipset (Mediatek MT7630e), whose driver wasn't updated for &amp;gt;5.4.0-54 kernel releases. I noticed this when I booted to an older kernel and everything worked fine. Found a one-to-one fix from &lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=337398&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="22405" LastActivityDate="2021-01-23T11:16:27.400" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26368" PostTypeId="2" ParentId="26365" CreationDate="2021-01-23T11:54:42.107" Score="1" Body="&lt;p&gt;Its just a regular folder. From the coding tutorial perspective, it will become the root folder. All following components and code will be filled in that folder.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-23T11:54:42.107" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26369" PostTypeId="2" ParentId="26362" CreationDate="2021-01-23T19:16:22.123" Score="1" Body="&lt;p&gt;Updates are provided by the repositories available on your system. The safety depends on multiple factors, a proper summary can be found here:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/35629/are-ppas-safe-to-add-to-my-system-and-what-are-some-red-flags-to-watch-out-for&quot;&gt;https://askubuntu.com/questions/35629/are-ppas-safe-to-add-to-my-system-and-what-are-some-red-flags-to-watch-out-for&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-23T19:16:22.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26370" PostTypeId="2" ParentId="15561" CreationDate="2021-01-24T19:58:47.380" Score="0" Body="&lt;p&gt;I was having the same problem. Here is the solution that I used.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Step 1&lt;/strong&gt;: Copy the python code and make it into an executable file and place it on your home folder&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/python3&#xA;import os,signal&#xA;import time&#xA;a=1&#xA;while (a==1):&#xA;    try:   &#xA;        #iterating through each instance of the proess &#xA;        process=os.popen('ps aux | grep &amp;quot;brave.com/brave/brave --type=gpu-process&amp;quot; | &#xA;        grep -v grep')&#xA;        str=(process.read())&#xA;        length=0&#xA;        length=len(str)&#xA;        if (length==0):&#xA;            print(&amp;quot;Process Teminated..&amp;quot;)&#xA;            a=2&#xA;        else:&#xA;            for line in os.popen('ps aux | grep &amp;quot;brave.com/brave/brave --type=gpu-process&amp;quot; | grep -v grep'):  &#xA;                fields = line.split() &#xA;                #extracting Process ID from the output &#xA;                pid = int(fields[1])  &#xA;                res=fields[3]&#xA;                res=float(res)/100*7.69*1024 #7.69 is the amount of ram i have.... yours might vary.&#xA;                # terminating process  &#xA;                if(res&amp;gt;100):&#xA;                    print(f&amp;quot;pid={pid} res={res}&amp;quot;)&#xA;                    os.kill(int(pid), signal.SIGKILL)  &#xA;                    print(&amp;quot;Process Successfully terminated&amp;quot;) &#xA;                time.sleep(6)&#xA;                length=0&#xA;      &#xA;    except: &#xA;        print(&amp;quot;Error Encountered while running script&amp;quot;) &#xA;        time.sleep(10)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Step 2&lt;/strong&gt;: Create a shell script to launch both the applications at the same time&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /usr/bin/;brave-browser-stable &amp;amp; brave=$!&#xA;sleep 2&#xA;cd /home/&amp;lt;your-username-here&amp;gt;/;./kill-gpu-brave &amp;amp; kill=$! #I named my  python execulable file kill-gpu-brave&#xA;wait $brave&#xA;wait $kill&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Step 3&lt;/strong&gt;: Make this an executable file with &lt;code&gt;chmod +x &amp;lt;filename&amp;gt;&lt;/code&gt; and launch brave through this file.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; For chrome the command will change. Please check your task manager. It will come under &lt;code&gt;--type=gpu-process&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="24969" LastActivityDate="2021-01-24T19:58:47.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26371" PostTypeId="1" CreationDate="2021-01-24T20:03:59.103" Score="0" ViewCount="85" Body="&lt;p&gt;I don't like the behaviour of the Alt + Tab shortcut when changing between windows. How can I change to something like macOS where you see a line of icons rather than changing windows?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/JNkLo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JNkLo.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I found a project in github but im not sure if it is safe to use&#xA;&lt;a href=&quot;https://github.com/jibbo/gala-elementary-alt-tab-switcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/jibbo/gala-elementary-alt-tab-switcher&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22671" LastEditorUserId="24889" LastEditDate="2021-02-10T23:13:09.743" LastActivityDate="2024-02-26T10:03:00.433" Title="Has anyone found a way to change ALT+Tab behaviour?" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26372" PostTypeId="2" ParentId="24364" CreationDate="2021-01-24T21:45:39.693" Score="0" Body="&lt;p&gt;Update: I ultimately ended up installing Ubuntu, but I believe the steps I used to fix the problem would also work for elementary OS. Be sure to back up your data for the unlikely event that something goes wrong while doing these steps.&lt;/p&gt;&#xA;&lt;p&gt;It's been a while since I've completed the steps, so follow these instructions at your own risk.&lt;/p&gt;&#xA;&lt;p&gt;First, I used the &amp;quot;Intel Optane Memory and Storage Management&amp;quot; application to disable Intel Optane Memory system acceleration and reboot. (Forgetting this step will cause Windows to enter &amp;quot;automatic repair&amp;quot; mode on boot in AHCI mode.)&lt;/p&gt;&#xA;&lt;p&gt;Then, launch &lt;code&gt;msconfig&lt;/code&gt; and enable minimal Safe Mode on the boot tab.&lt;/p&gt;&#xA;&lt;p&gt;Then boot into the BIOS configuration and set the SATA hard disk operation mode to AHCI mode.&lt;/p&gt;&#xA;&lt;p&gt;Reboot (into safe mode), and then launch &lt;code&gt;msconfig&lt;/code&gt; again, and disable Safe Mode on the boot tab.&lt;/p&gt;&#xA;&lt;p&gt;Reboot one last time. Your Windows system should function as normal. At this point you can resume the normal process of installing elementary OS/Ubuntu, including resizing partitions, etc.&lt;/p&gt;&#xA;&lt;p&gt;Note 1: I personally have not noticed a reduction in Windows speed from disabling the memory acceleration and switching the SATA operation mode from RAID to AHCI.&lt;/p&gt;&#xA;&lt;p&gt;Note 2: If Windows has a problem booting, try temporarily switching the SATA operation mode back to RAID.&lt;/p&gt;&#xA;&lt;p&gt;(Reference for switching Windows to AHCI mode: &lt;a href=&quot;https://superuser.com/a/1359471&quot;&gt;https://superuser.com/a/1359471&lt;/a&gt;).&lt;/p&gt;&#xA;" OwnerUserId="22714" LastEditorUserId="22714" LastEditDate="2021-01-24T21:56:20.763" LastActivityDate="2021-01-24T21:56:20.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26374" PostTypeId="1" AcceptedAnswerId="26393" CreationDate="2021-01-25T06:26:57.147" Score="1" ViewCount="173" Body="&lt;p&gt;Is Night Light expected to work on Raspberry Pi with recent elementary OS 6.0 (Odin) builds? Mine has never worked. Just wondering if this is expected to be fixed by the final release or if there’s a hardware limitation on RPi that makes it non-functional. Thanks!&lt;/p&gt;&#xA;" OwnerUserId="24889" LastActivityDate="2021-01-26T15:57:55.157" Title="Night Light on Raspberry Pi" Tags="|nightlight|raspberry-pi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26375" PostTypeId="2" ParentId="24026" CreationDate="2021-01-25T06:55:34.150" Score="0" Body="&lt;p&gt;Is this on elementary OS 6 (Odin)? According to &lt;a href=&quot;https://builds.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://builds.elementary.io/&lt;/a&gt; it looks like this is still a known issue.&lt;/p&gt;&#xA;" OwnerUserId="24889" LastActivityDate="2021-01-25T06:55:34.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26376" PostTypeId="2" ParentId="26359" CreationDate="2021-01-25T07:16:35.623" Score="0" Body="&lt;p&gt;Based on your good results with Google but slow page loading times for other sites, it sounds like you might have a bad DNS resolver configuration. I would first examine your resolver settings with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ resolvectl status&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and see if your network interface(s) might perhaps be pointing to an invalid or very slow DNS server. Note that DNS servers are searched in sequential order. As an experiment, you could try using Google’s or Cloudflare’s public DNS servers and see if that improves your page load times:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo resolvectl dns INTERFACE 1.1.1.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo resolvectl dns INTERFACE 8.8.8.8 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;where &lt;code&gt;INTERFACE&lt;/code&gt; is the short name of your desired network interface (e.g., &lt;code&gt;wlan0&lt;/code&gt; or &lt;code&gt;eth0&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="24889" LastActivityDate="2021-01-25T07:16:35.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26377" PostTypeId="2" ParentId="25848" CreationDate="2021-01-25T08:11:15.503" Score="0" Body="&lt;p&gt;I've used this advice for 8822ce driver: &lt;a href=&quot;https://easylinuxtipsproject.blogspot.com/p/realtek.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://easylinuxtipsproject.blogspot.com/p/realtek.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24971" LastActivityDate="2021-01-25T08:11:15.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26378" PostTypeId="1" CreationDate="2021-01-25T10:44:13.117" Score="0" ViewCount="34" Body="&lt;p&gt;I imported pictures from my phone, and my pictures are now in a file called &amp;quot;missing files&amp;quot;. How can I restore these pictures?&lt;/p&gt;&#xA;" OwnerUserId="24972" LastActivityDate="2021-09-07T00:17:55.993" Title="Missing Files after Photos Import" Tags="|photos|import|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26380" PostTypeId="1" CreationDate="2021-01-25T18:14:50.210" Score="0" ViewCount="67" Body="&lt;p&gt;I am wondering if winapps is also running on eOS&lt;/p&gt;&#xA;&lt;p&gt;Please find the link below:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Fmstrat/winapps&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Fmstrat/winapps&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I am waiting for eOS6 and running still popOS for now.&lt;/p&gt;&#xA;" OwnerUserId="19451" LastActivityDate="2021-01-25T20:12:09.423" Title="running winapps on elementaryOS" Tags="|applications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26383" PostTypeId="2" ParentId="26380" CreationDate="2021-01-25T20:12:09.423" Score="1" Body="&lt;p&gt;winapps is a script which uses kvm to run windows in a vm. You can use kvm on eOS, so winapps should also be working.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-25T20:12:09.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26384" PostTypeId="1" AcceptedAnswerId="26395" CreationDate="2021-01-25T20:44:47.917" Score="0" ViewCount="62" Body="&lt;p&gt;Good day all&lt;/p&gt;&#xA;&lt;p&gt;I am stumped... So I was running an older system on PopOS(From an HDD), I upgraded and decided to install ElementaryOS on my SSD, the HDD was still plugged in, when it came to choosing where to install, I chose the SSD and just let the installer decide how to partition.&lt;/p&gt;&#xA;&lt;p&gt;Now I did find it odd that the SSD was not showing up in the Boot section of the BIOS, even after successfully installing an OS... So it boots to the HDD, grub loads and I select ElementaryOS and it boots fine from the ssd from there... Now my problem is this.&lt;/p&gt;&#xA;&lt;p&gt;I would love to just format the entire 4TB drive to use it for storage(it's currently still encrypted from previous install and I have to unlock it everytime I need to access it).&lt;br /&gt;&#xA;I already have all the data I needed from it backed up, but I am not sure how to format it and not mess up the weird boot situation, or how to get the mobo to boot directly off of the SSD (Again, the ssd is not listed as a boot device, even override, BIOS version is most recent non-beta). I have tried a few settings in BIOS but none have helped. Secure boot is set to OtherOS(If that matters).&lt;/p&gt;&#xA;&lt;p&gt;I spent a bit of time setting up things on the OS now and would prefer a fix rather than a reinstall. It's also my first m.2 install ever, I just assumed it would function as a normal SATA device but apparently not. I have only been a full-time Linux user for around 9 months now(Loving it).&lt;/p&gt;&#xA;&lt;p&gt;Should the SSD be set as a primary? If so how can I do that?&#xA;Here is some fdisk -l output:&lt;/p&gt;&#xA;&lt;p&gt;Disk /dev/sdb: 477 GiB, 512110190592 bytes, 1000215216 sectors&lt;br /&gt;&#xA;Units: sectors of 1 * 512 = 512 bytes&lt;br /&gt;&#xA;Sector size (logical/physical): 512 bytes / 4096 bytes&lt;br /&gt;&#xA;I/O size (minimum/optimal): 4096 bytes / 4096 bytes&lt;br /&gt;&#xA;Disklabel type: gpt&lt;br /&gt;&#xA;Disk identifier: 47942DB9-2DCD-4EF8-AD14-691553C783F4&lt;br /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Device       Start        End   Sectors   Size Type&lt;br /&gt;&#xA;/dev/sdb1     2048    1050623   1048576   512M EFI System&lt;br /&gt;&#xA;/dev/sdb2  1050624 1000214527 999163904 476.4G Linux LVM&lt;br /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Disk /dev/sda: 3.7 TiB, 4000787030016 bytes, 7814037168 sectors&lt;br /&gt;&#xA;Units: sectors of 1 * 512 = 512 bytes&lt;br /&gt;&#xA;Sector size (logical/physical): 512 bytes / 4096 bytes&lt;br /&gt;&#xA;I/O size (minimum/optimal): 4096 bytes / 4096 bytes&lt;br /&gt;&#xA;Disklabel type: gpt&lt;br /&gt;&#xA;Disk identifier: 70C4DE00-B732-4335-BEB7-E0300D91CFB5&lt;br /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Device          Start        End    Sectors  Size Type&lt;br /&gt;&#xA;/dev/sda1        4096    1023998    1019903  498M EFI System&lt;br /&gt;&#xA;/dev/sda2     1024000    9412606    8388607    4G Microsoft basic data&lt;br /&gt;&#xA;/dev/sda3     9412608 7805644462 7796231855  3.6T Linux filesystem&lt;br /&gt;&#xA;/dev/sda4  7805644464 7814033070    8388607    4G Linux swap&lt;br /&gt;&lt;/p&gt;&#xA;" OwnerUserId="24980" LastActivityDate="2021-01-26T17:04:50.933" Title="Help to boot directly off m.2 drive instead of my hdd where the bootloader is. ASUS A520M-K" Tags="|boot|ssd|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26385" PostTypeId="1" CreationDate="2021-01-26T03:30:59.410" Score="0" ViewCount="108" Body="&lt;p&gt;There is a cracking sound when I play music via headphones on my laptop. The built in speakers play back just fine. Also cracking noise when recording audio via Loom. What's going on?&#xA;I think this started after I paired the laptop with a bluetooth speaker.&lt;/p&gt;&#xA;" OwnerUserId="8059" LastActivityDate="2024-02-10T23:09:11.143" Title="Cracking sound on headphones" Tags="|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26386" PostTypeId="1" AcceptedAnswerId="26387" CreationDate="2021-01-26T08:07:55.323" Score="0" ViewCount="104" Body="&lt;p&gt;In Hera, sometimes I press the super key to activate a shortcut and then I change my mind.&#xA;However an annoying keyboard shortcuts preview pane appears. Pressing the super key again gets rid of it. But is there a way to make it not appear in the first place?&lt;/p&gt;&#xA;" OwnerUserId="24987" LastEditorUserId="15904" LastEditDate="2021-01-27T01:33:25.753" LastActivityDate="2021-01-27T01:33:25.753" Title="Remove shortcut preview" Tags="|release-hera|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26387" PostTypeId="2" ParentId="26386" CreationDate="2021-01-26T08:47:23.070" Score="2" Body="&lt;p&gt;Go to Settings &amp;gt; Keyboard and change the default behavior for the ⌘-key to disabled.&lt;/p&gt;&#xA;&lt;p&gt;⌘-key is the super-key or the 'windows'-key. See wikipedia for the origin of the symbol.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17168/how-to-disable-keyboard-shortcuts-pop-up-in-juno&quot;&gt;source&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T08:47:23.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26388" PostTypeId="2" ParentId="26384" CreationDate="2021-01-26T08:54:55.703" Score="0" Body="&lt;p&gt;So we you need to narrow down some possible unwanted settings and behavior first.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I assume the ssd drive is shown in the bios, when showing drives?&lt;/li&gt;&#xA;&lt;li&gt;I assume u already set the ssd as boot device&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If that is done and no change, you could install grub-customizer on the popos install and see if an eOS entry is set. If not, create an eOS entry with it.&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://itsfoss.com/grub-customizer-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for more detail on how to do so.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T08:54:55.703" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26389" PostTypeId="2" ParentId="26385" CreationDate="2021-01-26T13:06:08.997" Score="0" Body="&lt;p&gt;What happens when you enter the following in the terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;pulseaudio -k &#xA;# or&#xA;killall pulseaudio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T13:06:08.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26390" PostTypeId="2" ParentId="26371" CreationDate="2021-01-26T13:10:08.613" Score="0" Body="&lt;p&gt;The repo you mentioned is updated quite recently, so it is worth to try.&#xA;Seems you need dconf-editor to enable this.&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://github.com/p0pye/gala-elementary-alt-tab-switcher/issues/2#issuecomment-453174785&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for more details.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T13:10:08.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26391" PostTypeId="2" ParentId="21165" CreationDate="2021-01-26T13:17:47.383" Score="0" Body="&lt;p&gt;This can also be set directly from a terminal with the &lt;code&gt;xdg-settings&lt;/code&gt; command.&#xA;Just provide file name of the &lt;code&gt;.desktop&lt;/code&gt; file for the browser, often available in &lt;code&gt;/usr/share/applications&lt;/code&gt; or in &lt;code&gt;~/.local/share/flatpak/exports/share/applications/&lt;/code&gt; if the browser was installed as a Flatpak.&#xA;For instance, to set the default web browser to Firefox, assuming it's installed of course, just use the following command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ xdg-settings set default-web-browser firefox.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-01-26T13:17:47.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26392" PostTypeId="2" ParentId="26352" CreationDate="2021-01-26T13:57:36.960" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Currently, it doesn't appear possible to hide the drivers.&#xA;Checkout the related &lt;a href=&quot;https://github.com/elementary/appcenter/issues/247&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue #247&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/appcenter/issues/1068&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue #1068&lt;/a&gt; on the AppCenter's issue tracker which have to do with this.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I recommend installing the latest Nvidia drivers that support your graphics card.&#xA;I have similar drivers available on my laptop and use the &lt;code&gt;nvidia-driver-390&lt;/code&gt; package which works very well.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-01-26T13:57:36.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26393" PostTypeId="2" ParentId="26374" CreationDate="2021-01-26T15:57:55.157" Score="0" Body="&lt;p&gt;This is a hardware limitation according to &lt;a href=&quot;https://github.com/raspberrypi/firmware/issues/1274&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue #1274&lt;/a&gt; in the Rasberry Pi firmware.&#xA;If support is added, I wouldn't be surprised if it starts working in elementaryOS 6 or previous versions as the updated firmware becomes available.&lt;/p&gt;&#xA;&lt;p&gt;There is also &lt;a href=&quot;https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/issues/580&quot; rel=&quot;nofollow noreferrer&quot;&gt;an issue&lt;/a&gt; in the GNOME Settings daemon - which elementary OS uses for this feature - to expose whether or not the hardware supports Night Light.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-01-26T15:57:55.157" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26394" PostTypeId="1" AcceptedAnswerId="26399" CreationDate="2021-01-26T16:53:05.640" Score="0" ViewCount="104" Body="&lt;p&gt;My boot is too slow - 1min 1.778s. Im beginner in linux and i have old PC but enough for elementary i think... I noticed that after install snapd boot is slower. Can i delete this service and how ??&lt;/p&gt;&#xA;&lt;p&gt;systemd-analyze blame&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;     41.149s dev-sda1.device&#xA;     26.252s snapd.service&#xA;     22.230s pantheon-parental-controls.service&#xA;     20.470s networkd-dispatcher.service&#xA;     20.368s dev-loop1.device&#xA;     20.366s dev-loop0.device&#xA;     20.159s dev-loop2.device&#xA;     19.976s udisks2.service&#xA;     19.954s dev-loop3.device&#xA;     19.857s dev-loop4.device&#xA;     14.568s ModemManager.service&#xA;     11.599s NetworkManager.service&#xA;     10.908s thermald.service&#xA;     10.859s pppd-dns.service&#xA;     10.716s kerneloops.service&#xA;      8.856s systemd-logind.service&#xA;      8.309s accounts-daemon.service&#xA;      8.280s apparmor.service&#xA;      7.276s lightdm.service&#xA;      7.275s plymouth-quit-wait.service&#xA;      6.856s systemd-journal-flush.service&#xA;      6.453s systemd-udevd.service&#xA;      5.508s wpa_supplicant.service&#xA;      4.831s rsyslog.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user24989" LastActivityDate="2021-01-26T19:53:34.063" Title="Slow boot ElementaryOS 5.1.7 after install Snapd" Tags="|system-installation|boot|system|user|secure-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26395" PostTypeId="2" ParentId="26384" CreationDate="2021-01-26T17:04:50.933" Score="0" Body="&lt;p&gt;Okay so...&lt;/p&gt;&#xA;&lt;p&gt;I managed to solve the problem. UEFI and m.2 drives apparently need an ESP partition with correct files in it to recognize it as bootable, otherwise, it will only list it as a connected device in your BIOS, not as a boot option.&lt;/p&gt;&#xA;&lt;p&gt;I installed boot-repair:&#xA;&lt;a href=&quot;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then I used it to give me a report, the SSD did have an ESP partition but was empty(thus not selectable as a Boot device in my bios)&lt;/p&gt;&#xA;&lt;p&gt;I then ran boot-repair again selecting advanced options, and GRUB Location, I set it from sda to sdb(the latter being the SSD), but that messed something up...(NVRAM LOCKED)&lt;/p&gt;&#xA;&lt;p&gt;So I booted into the Elementary Live USB and followed again the installation as described here:&#xA;&lt;a href=&quot;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fosslinux.com/1521/boot-repair-for-ubuntu-linux-mint-and-elementary-os-can-fix-bootloader-issues.htm&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I followed the same procedure as before with the advanced settings, making sure to copy the commands into the terminal and being patient as boot-repair gave them to me.&lt;/p&gt;&#xA;&lt;p&gt;I restarted the machine and went into the BIOS and viola! My SSD is there, booted right off it with Grub 2, and no problems... Now I can finally reformat my 4TB.&lt;/p&gt;&#xA;&lt;p&gt;I still would not be able to do something like this without a tool such as boot-repair though.&lt;/p&gt;&#xA;&lt;p&gt;From what I can gather, having another drive with an esp partition present during install will prompt the automated installer to just use that current one for the boot loader, even though it created one on the target drive... I might be wrong, but this is what I understand from all I have read/done.&lt;/p&gt;&#xA;&lt;p&gt;So when installing an OS to an m.2 drive, make sure all other drives are disconnected.&lt;/p&gt;&#xA;" OwnerUserId="24980" LastActivityDate="2021-01-26T17:04:50.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26396" PostTypeId="1" CreationDate="2021-01-26T18:06:47.957" Score="0" ViewCount="69" Body="&lt;p&gt;OK.&lt;/p&gt;&#xA;&lt;p&gt;Setup.&#xA;Asus H87I-Plus Micro ITX motherboard&#xA;16 GB RAM&#xA;1 TB SSD hard drive (standard...not the little one)&#xA;Dual boot with Windows 10 home&lt;/p&gt;&#xA;&lt;p&gt;Problem.&lt;/p&gt;&#xA;&lt;p&gt;If I do a complete hard boot (pushing the power button on my computer to turn it on from completely being off) and I choose either the Elementary OS or Windows 10 in GRUB...no problem.   Can boot into either OS, no problem...can get onto the internet with a wired internet connection in both environments.&lt;/p&gt;&#xA;&lt;p&gt;Everything is peachy.&lt;/p&gt;&#xA;&lt;p&gt;But.&lt;/p&gt;&#xA;&lt;p&gt;If I'm in Elementary OS and I select RESTART, or even SHUT DOWN...or if I'm in the Windows 10 environment and I select restart and I try to enter Elementary OS using GRUB from any restart option...&lt;/p&gt;&#xA;&lt;p&gt;The Elementary OS environment isn't allowing me to go onto the internet.    It's saying connected...but using Chrome, Firefox and Opera...none of the browsers are showing me connected to the internet.&lt;/p&gt;&#xA;&lt;p&gt;This is a problem specific to Elementary OS.    A restart doesn't fix the problem.&lt;/p&gt;&#xA;&lt;p&gt;What fixes the problem is I hold down my power button on my computer...the system does a hard shut down...I push the power button again...choose Elementary OS in GRUB...and my wired connection once again allows my browsers to go online.   It's not just the browsers either.   My email client (Blue Mail) also won't receive emails unless I hard boot my elementary OS environment.&lt;/p&gt;&#xA;&lt;p&gt;Is there a setting in the BIOS that has an impact on Elementary OS but doesn't have the same impact on Windows 10?   I've never been able to connect to the internet on my Windows environment since I built my PC 8 years ago.   Elementary OS has been the first cog.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="24990" LastEditorUserId="24990" LastEditDate="2021-01-26T18:13:34.097" LastActivityDate="2024-02-11T04:07:20.840" Title="When booting into Elementary OS...NOT from a hard restart...no wired internet connection" Tags="|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26397" PostTypeId="2" ParentId="26312" CreationDate="2021-01-26T18:08:03.383" Score="2" Body="&lt;p&gt;I just figured out how to do this on Friday for my wife's 2010 Macbook7,1.&#xA;You are correct that this is an issue with the graphics drivers.&#xA;A bug in Apple's EFI leads to the graphics card not being initialized correctly and subsequent loading of the proprietary Nvidia drivers fails.&#xA;The blank screen of death doesn't occur when using the Nouveau drivers.&#xA;This presents a couple different ways to solve your problem which I enumerate below.&lt;/p&gt;&#xA;&lt;h2&gt;Option #1: Legacy BIOS&lt;/h2&gt;&#xA;&lt;p&gt;You can install elementary OS in legacy BIOS mode in which case the graphics drivers are initialized correctly and brightness controls will work sometimes but not reliably right now.&#xA;The instructions to do this are as follows.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot the installation media as usual.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Proceed through the installation as normal.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;On the &lt;em&gt;Updates and other software&lt;/em&gt; dialog, check the box next to &lt;em&gt;Install third-party software for graphics...&lt;/em&gt; to install the Nvidia drivers.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qr1f6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qr1f6.png&quot; alt=&quot;Install third-party software&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;On the &lt;em&gt;Installation type&lt;/em&gt; dialog, select &lt;em&gt;Something else&lt;/em&gt; and click &lt;em&gt;Continue&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VBegt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VBegt.png&quot; alt=&quot;Installation Type Something Else&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Next you will be presented with the partitions of the attached disks.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gg6ox.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gg6ox.png&quot; alt=&quot;Initial Partitions&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;In my case, &lt;em&gt;/dev/sda&lt;/em&gt; is the disk in my machine and already contains several partitions for an existing operating system.&#xA;I'm just going to irreversibly destroy all of that and install elementaryOS on the disk.&#xA;Select your device, &lt;em&gt;/dev/sda&lt;/em&gt; in my case here, and then press &lt;em&gt;New Partition Table&lt;/em&gt; button and confirm the next prompt.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jGuDP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jGuDP.png&quot; alt=&quot;Empty Partition Table&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;7&quot;&gt;&#xA;&lt;li&gt;This step is the important one to ensure that the system boots in legacy BIOS compatibility mode.&#xA;Select the free space row under your disk and click the plus symbol in the bottom left.&#xA;Now create a 1 MiB partition with the type &lt;em&gt;Reserved BIOS boot area&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/16jpk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/16jpk.png&quot; alt=&quot;Create Reserved BIOS Boot Area&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;8&quot;&gt;&#xA;&lt;li&gt;Click Okay and your partition table should now look similar to what is shown here.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WguQO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WguQO.png&quot; alt=&quot;Created Reserved BIOS Boot Area&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;9&quot;&gt;&#xA;&lt;li&gt;At this point, you can partition the rest of your disk however you like.&#xA;Below is an example of what your final partition table might look like.&#xA;I chose to encrypt my installation and use &lt;em&gt;btrfs&lt;/em&gt; instead of the default &lt;em&gt;ext4&lt;/em&gt; filesystem.&#xA;Make sure &lt;em&gt;not&lt;/em&gt; to create an EFI partition.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VQt56.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VQt56.png&quot; alt=&quot;Final Partition Table&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;10&quot;&gt;&#xA;&lt;li&gt;Select &lt;em&gt;Install Now&lt;/em&gt; when you are satisfied.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eLRiV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eLRiV.png&quot; alt=&quot;Write the Changes to Disks&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;11&quot;&gt;&#xA;&lt;li&gt;A dialog will warn you that &lt;em&gt;No EFI System Partition was Found&lt;/em&gt; but go ahead and click &lt;em&gt;Continue&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jjmZN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jjmZN.png&quot; alt=&quot;No EFI System Partition was Found&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;12&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Now complete the installation as normal and reboot.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The system should boot without a problem.&#xA;Of course, there are a couple of finicky things to fix still.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Edit &lt;em&gt;/etc/default/grub&lt;/em&gt; and uncomment and set &lt;code&gt;GRUB_GFXMODE&lt;/code&gt; to &lt;code&gt;1280x800&lt;/code&gt; to fix the resolution of the boot splash screen.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_GFXMODE=1280x800&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;15&quot;&gt;&#xA;&lt;li&gt;Update grub for these changes to be applied at the next boot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo update grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;16&quot;&gt;&#xA;&lt;li&gt;Now, create a new file &lt;em&gt;/etc/X11/xorg.conf.d/20-nvidia.conf&lt;/em&gt; to apply some X settings for the Nvidia drivers.&#xA;The file should look like what is shown here.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;Section &amp;quot;Device&amp;quot;&#xA;        Identifier &amp;quot;Nvidia Card&amp;quot;&#xA;        Driver &amp;quot;nvidia&amp;quot;&#xA;        VendorName &amp;quot;NVIDIA Corporation&amp;quot;&#xA;        BoardName &amp;quot;GeForce 320M&amp;quot;&#xA;        Option &amp;quot;NoLogo&amp;quot; &amp;quot;1&amp;quot;&#xA;        Option &amp;quot;RegistryDwords&amp;quot; &amp;quot;EnableBrightnessControl=1&amp;quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This disables the &lt;em&gt;tacky&lt;/em&gt; Nvidia splash screen and also enables brightness controls.&lt;/p&gt;&#xA;&lt;ol start=&quot;17&quot;&gt;&#xA;&lt;li&gt;Restart for these changes to take effect.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Since you've installed in BIOS mode, you can easily switch between the proprietary and free drivers safely.&#xA;In AppCenter, just open the &lt;em&gt;Installed&lt;/em&gt; tab and near the top will be an option for the Nvidia drivers which can be uninstalled and reinstalled at will.&lt;/p&gt;&#xA;&lt;h2&gt;Option #2: Patch the Bootloader&lt;/h2&gt;&#xA;&lt;p&gt;It's possible to get the drivers working in EFI mode by having the bootloader initialize the graphics card instead.&#xA;This solution is described in the Debian Wiki &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple/MacBookPro/7-1#GPU_.2F_Nvidia_Geforce_320M&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; under the section &lt;em&gt;Black screen fix (EFI mode)&lt;/em&gt;.&#xA;I was unable to get Linux to recognize the appropriate backlight driver when using this method so controlling the screen's brightness isn't possible.&#xA;The brightness does work with a kernel parameter when booting in legacy BIOS compatibility mode.&#xA;If you are unable to boot into your system at all like I was, you will need to boot the installation media, select &lt;em&gt;Try elementary OS&lt;/em&gt;, mount your installed partitions, and chroot into the installation before following these instructions.&#xA;The chroot process is described in the Debian Wiki &lt;a href=&quot;https://wiki.debian.org/RescueLive&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;h3&gt;Patching Grub&lt;/h3&gt;&#xA;&lt;p&gt;The Grub bootloader can be patched using the following instructions.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Create a Grub script which initializes the graphics card.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ echo &amp;quot;setpci -s \&amp;quot;$(sudo lshw -businfo -class bridge -class display | awk '/MCP89 PCI Express Bridge/ {gsub(&amp;quot;pci@0000:&amp;quot;, &amp;quot;&amp;quot;, $1); print $1}')\&amp;quot; 3e.b=8&amp;quot; | sudo tee /etc/grub.d/01_enable_vga.conf&#xA;setpci -s &amp;quot;00:17.0&amp;quot; 3e.b=8&#xA;$ echo &amp;quot;setpci -s \&amp;quot;$(sudo lshw -businfo -class bridge -class display | awk '/MCP89 GeForce 320M/ {gsub(&amp;quot;pci@0000:&amp;quot;, &amp;quot;&amp;quot;, $1); print $1}')\&amp;quot; 04.b=7&amp;quot; | sudo tee -a /etc/grub.d/01_enable_vga.conf&#xA;setpci -s &amp;quot;02:00.0&amp;quot; 04.b=7&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Set the appropriate permissions for the Grub script.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo chmod 755 /etc/grub.d/01_enable_vga.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Update Grub.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;If you're chrooted in to your installation, leave the chroot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ exit&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;If you are using rEFInd, make sure to choose the option for &lt;code&gt;EFI\ubuntu\grubx64.efi&lt;/code&gt; to boot Grub via EFI.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;Option #3: Nouveau&lt;/h2&gt;&#xA;&lt;p&gt;Removing the proprietary Nvidia drivers and using the Nouveau drivers will boot and function in either EFI or legacy BIOS mode but this is not ideal.&#xA;My wife's Macbook experiences frequent hangs and complete crashes when using this particular Macbook with the Nouveau drivers when booting in EFI mode, particularly under X11.&#xA;I suspect that the Nouveau drivers function much better under legacy BIOS, but I haven't tested this yet.&#xA;My experience with the Nouveau drivers and the Epiphany browser aren't the greatest either.&#xA;I can deterministically crash the entire operating system by opening GitHub's homepage in Epiphany when using the Nouveau drivers due to the 3D acceleration.&#xA;The laptop also runs much hotter than it does when using the proprietary drivers.&#xA;That said, Nouveau drivers tend to integrate much better with desktop environments.&lt;/p&gt;&#xA;&lt;h2&gt;See also&lt;/h2&gt;&#xA;&lt;p&gt;I also recommend looking into &lt;a href=&quot;https://ineed.coffee/project/mbpfan.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;mbpfan&lt;/a&gt; and &lt;a href=&quot;https://linrunner.de/tlp/&quot; rel=&quot;nofollow noreferrer&quot;&gt;TLP&lt;/a&gt; to get the most out of your Macbook.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-08T13:48:49.673" LastActivityDate="2021-02-08T13:48:49.673" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26398" PostTypeId="2" ParentId="21410" CreationDate="2021-01-26T18:42:46.803" Score="0" Body="&lt;p&gt;I think this is the same problem described in &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/26312/can-install-on-white-macbook-2010-but-boot-only-shows-black-screen&quot;&gt;Can install on white MacBook (2010) but boot only shows black screen&lt;/a&gt;.&#xA;This is due to a bug in Apple's EFI and using the proprietary Nvidia graphics.&#xA;Please refer to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/26397/20782&quot;&gt;my answer there&lt;/a&gt; for instructions on how to remedy this situation.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-01-26T18:42:46.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26399" PostTypeId="2" ParentId="26394" CreationDate="2021-01-26T19:53:34.063" Score="0" Body="&lt;p&gt;To remove:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt remove --purge -y snapd &#xA;rm -rf /root/snap /snap /var/lib/snapd /var/snap&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T19:53:34.063" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26400" PostTypeId="2" ParentId="26396" CreationDate="2021-01-26T20:10:09.590" Score="0" Body="&lt;p&gt;The descripted issue might be caused by a lot of things.&lt;br /&gt;&#xA;I would like to suggest to start with setting the nic as managed by NM.&lt;/p&gt;&#xA;&lt;p&gt;See &lt;a href=&quot;https://www.cyberciti.biz/faq/change-netplan-renderer-from-networkd-to-networkmanager/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for some instructions.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-26T20:10:09.590" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26404" PostTypeId="1" CreationDate="2021-01-27T10:51:46.820" Score="0" ViewCount="41" Body="&lt;p&gt;USB-stick made with Etcher but after boorin shows up only some cryptic text ...&lt;/p&gt;&#xA;&lt;p&gt;Should DVD help or getting rid of Rock Ridge dual folders in iso ?&lt;/p&gt;&#xA;&lt;p&gt;JK&lt;/p&gt;&#xA;" OwnerUserId="24997" LastActivityDate="2024-02-12T02:06:45.797" Title="Mac Pro 3,1 installation from USB freezes" Tags="|boot|grub|macintosh|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26405" PostTypeId="2" ParentId="26404" CreationDate="2021-01-27T18:44:38.123" Score="0" Body="&lt;p&gt;Try rufus. See also:&#xA;&lt;a href=&quot;https://ubuntu.com/tutorials/create-a-usb-stick-on-windows#1-overview&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntu.com/tutorials/create-a-usb-stick-on-windows#1-overview&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When this also fails, please provide more info.&lt;/p&gt;&#xA;" OwnerUserId="24893" LastActivityDate="2021-01-27T18:44:38.123" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26406" PostTypeId="2" ParentId="7437" CreationDate="2021-01-27T21:34:41.973" Score="0" Body="&lt;p&gt;WPS is an excellent alternative to MS but its PowerPoint does not support audio/ video insertion or voice recording.&#xA;Libreoffice is also great but their PowerPoint templates are the most useless ones. secondly, you cannot import your own templates&#xA;so you are stuck in both cases 1. in WPS, you cannot have a ppt with narration 2. in LibreOffice, you cannot have your choice of a template by importing the saved one&lt;/p&gt;&#xA;" OwnerUserId="25005" LastActivityDate="2021-01-27T21:34:41.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26407" PostTypeId="1" CreationDate="2021-01-27T21:42:18.903" Score="0" ViewCount="251" Body="&lt;p&gt;hope everyone is fine.&lt;/p&gt;&#xA;&lt;p&gt;Before I start, I have to say that I have searched a lot for the solution and I have found &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/18/one-of-my-apps-has-a-second-fuzzy-icon-in-plank-how-can-i-workaround-this&quot;&gt;this&lt;/a&gt;, but it doesn't solve the problem, nor does it happen with Google Chrome.&lt;/p&gt;&#xA;&lt;p&gt;What happens is that some applications, some installed from flathub and others as .appimage, are shown double in the Plank for a few seconds, until the blurred version remains and the good one disappears.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yOZk3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yOZk3.png&quot; alt=&quot;Chromium&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/PK45s.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PK45s.png&quot; alt=&quot;Calibre&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There are some more apps, but this are good examples. How can I fix this, is there a universal solution or do I have to go one by one?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="25004" LastActivityDate="2024-02-15T18:06:00.663" Title="Fuzzy double icon for some applications on plank" Tags="|release-hera|plank|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26408" PostTypeId="2" ParentId="5342" CreationDate="2021-01-28T01:55:59.907" Score="0" Body="&lt;p&gt;i already set up linux to boot first yet, many times my boot will stuck at dell logo.&#xA;i need to force shutdown few times until manage to go grub boot manager.&lt;/p&gt;&#xA;" OwnerUserId="25007" LastActivityDate="2021-01-28T01:55:59.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26409" PostTypeId="1" CreationDate="2021-01-28T13:52:34.363" Score="0" ViewCount="253" Body="&lt;p&gt;I need to do this remotely on someone's computer using SSH, so would like to know if its possible via the terminal.&lt;/p&gt;&#xA;&lt;p&gt;I did try to use X11 over SSH, but I think it would crash because the setting is in the video section.&lt;/p&gt;&#xA;" OwnerUserId="18042" LastActivityDate="2021-02-27T15:06:00.603" Title="Turn off night light via the terminal" Tags="|nightlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26411" PostTypeId="2" ParentId="26409" CreationDate="2021-01-28T14:56:59.287" Score="1" Body="&lt;p&gt;You can do this easily with &lt;code&gt;gsettings&lt;/code&gt;.&#xA;The key you are looking for is &lt;code&gt;night-light-enabled&lt;/code&gt; which is in the &lt;code&gt;org.gnome.settings-daemon.plugins.color&lt;/code&gt; schema.&#xA;The value can be either &lt;code&gt;true&lt;/code&gt; or &lt;code&gt;false&lt;/code&gt;.&#xA;To disable Night Light, set the value to false with the &lt;code&gt;set&lt;/code&gt; sub-command as in the following.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set org.gnome.settings-daemon.plugins.color night-light-enabled false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can confirm this change by then checking the key's value with the &lt;code&gt;get&lt;/code&gt; command as follows.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings get org.gnome.settings-daemon.plugins.color night-light-enabled&#xA;false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-01-28T14:56:59.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26412" PostTypeId="2" ParentId="24740" CreationDate="2021-01-28T15:10:54.503" Score="0" Body="&lt;p&gt;On Elementary OS Hera 5.1.7 (based on 18.04.4) using kernel 5.8.0-39 (necessary for hardware compatibility reasons), I was able to resolve this issue by&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;installing pavucontrol and blueman&#xA;and&lt;/li&gt;&#xA;&lt;li&gt;editing /etc/bluetooth/main.conf&#xA;&amp;quot;MultiProfile=multiple&amp;quot; under &amp;quot;general&amp;quot;&#xA;(see &lt;a href=&quot;https://wiki.archlinux.org/index.php/Bluetooth_headset#A2DP_not_working_with_PulseAudio&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.archlinux.org/index.php/Bluetooth_headset#A2DP_not_working_with_PulseAudio&lt;/a&gt;)&#xA;change &amp;quot;AutoEnable=false&amp;quot; (not sure if that did anything)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Before this, I couldn't connect to bluetooth audio sinks, period, unless I used bluetoothctl. At that point, it would only connect to the duplex low quality sink (HSP/HFP) and not A2DP (high audio quality).&lt;/p&gt;&#xA;&lt;p&gt;Now it appears to be able to work well enough in either mode, with mode-switching on the fly, however, with consistent errors:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[  994.225669] Bluetooth: hci0: urb 0000000085e83e50 submission failed (90)&#xA;[  994.225675] Bluetooth: hci0: sending frame failed (-90)&#xA;[  994.238145] Bluetooth: hci0: SCO packet for unknown connection handle 0&#xA;[  994.238153] Bluetooth: hci0: SCO packet for unknown connection handle 0&#xA;[  994.238155] Bluetooth: hci0: SCO packet for unknown connection handle 0&#xA;[  994.238157] Bluetooth: hci0: SCO packet for unknown connection handle 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23095" LastActivityDate="2021-01-28T15:10:54.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26413" PostTypeId="2" ParentId="25571" CreationDate="2021-01-28T22:00:10.450" Score="0" Body="&lt;p&gt;It looks like you're not the only one according to &lt;a href=&quot;https://github.com/elementary/terminal/issues/39&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue #39&lt;/a&gt; on Terminal's GitHub repository.&lt;/p&gt;&#xA;&lt;p&gt;You can set the color palette for the terminal directly through &lt;code&gt;gsettings&lt;/code&gt; on the command-line or the dconf Editor application.&#xA;Your looking for the &lt;code&gt;palette&lt;/code&gt; key found under the schema &lt;code&gt;io.elementary.terminal.settings&lt;/code&gt; in particular.&lt;/p&gt;&#xA;&lt;p&gt;The default setting is &lt;code&gt;'#073642:#dc322f:#859900:#b58900:#268bd2:#ec0048:#2aa198:#94a3a5:#586e75:#cb4b16:#859900:#b58900:#268bd2:#d33682:#2aa198:#6c71c4'&lt;/code&gt;.&#xA;To fix your particular issue, you might want to change the first occurrence of the &lt;code&gt;#859900&lt;/code&gt; in the list of colors to something like say a light gray, &lt;code&gt;#a7a79f&lt;/code&gt;, as shown here:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ gsettings set io.elementary.terminal.settings palette \&#xA;  '#073642:#dc322f:#a7a79f:#b58900:#268bd2:#ec0048:#2aa198:#94a3a5:#586e75:#cb4b16:#859900:#b58900:#268bd2:#d33682:#2aa198:#6c71c4'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To have this issue fixed in the future, please provide feedback to the elementary team through &lt;em&gt;About -&amp;gt; Report Problems&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-01-28T22:07:15.767" LastActivityDate="2021-01-28T22:07:15.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26414" PostTypeId="1" CreationDate="2021-01-29T09:03:29.933" Score="1" ViewCount="92" Body="&lt;p&gt;I know there's a lot of people who think that active apps are really hard to notice in the Dock. Even with the dark theme installed that blue circle beneath the app is really tough to spot.&#xA;&lt;br&gt;&#xA;So can someone suggest a good, possibly dark, theme that makes active apps easier to spot.&lt;/p&gt;&#xA;" OwnerUserId="25014" LastActivityDate="2021-06-29T13:05:05.453" Title="Theme for elementary OS which makes active apps in the Dock easier to spot" Tags="|release-hera|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26415" PostTypeId="1" CreationDate="2021-01-29T09:08:57.663" Score="0" ViewCount="197" Body="&lt;p&gt;I am using Elementary os 5.1.7. Both my shift keys are not working. Previously I was using Ubuntu 20.04 and the keys were working absolutely fine.&lt;/p&gt;&#xA;" OwnerUserId="23403" LastActivityDate="2024-02-16T00:07:15.887" Title="Shift key stopped working" Tags="|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26417" PostTypeId="2" ParentId="20849" CreationDate="2021-01-29T16:52:48.467" Score="0" Body="&lt;p&gt;You could try running the command &lt;code&gt;nmcli radio wifi on&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;This helped me with this issue.&lt;/p&gt;&#xA;" OwnerUserId="25017" LastEditorUserId="2629" LastEditDate="2021-02-03T19:29:11.543" LastActivityDate="2021-02-03T19:29:11.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26419" PostTypeId="1" CreationDate="2021-01-29T20:04:57.327" Score="1" ViewCount="234" Body="&lt;p&gt;Trying to figure out how to have my secondary monitor include both wingpanel/plank.&lt;/p&gt;&#xA;&lt;p&gt;I tried this solution but no go: &lt;a href=&quot;https://heathpaddock.com/2015/11/12/multi-planking-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://heathpaddock.com/2015/11/12/multi-planking-in-elementary-os/&lt;/a&gt; - this is what happens:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Hit:16 http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic InRelease&#xA;&#xA;Err:17 http://ppa.launchpad.net/heathbar/multiplank/ubuntu bionic Release&#xA;&#xA;404 Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;&#xA;Reading package lists... Done&#xA;&#xA;E: The repository 'http://ppa.launchpad.net/heathbar/multiplank/ubuntu bionic Release' does not have a Release file.&#xA;&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&#xA;usr@usr:~$ sudo apt-get install multiplank&#xA;&#xA;Reading package lists... Done&#xA;&#xA;Building dependency tree&#xA;&#xA;Reading state information... Done&#xA;&#xA;E: Unable to locate package multiplank&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have also tried: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/876/how-can-i-get-plank-and-wingpanel-on-both-monitors-without-mirroring-screens&quot;&gt;How can I get Plank and Wingpanel on both monitors without Mirroring Screens&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So far, I have only been able to use a tool called AutoPlank which isnt perfect and laggy - but it at least moves the dock over to the current monitor im working in when needed.&lt;/p&gt;&#xA;&lt;p&gt;Anyone find a way to do this? Running: elementary OS 5.1.7 Hera x86_64&lt;/p&gt;&#xA;" OwnerUserId="25018" LastActivityDate="2021-01-29T20:04:57.327" Title="How to get Wingpanel/Plank onto second monitor?" Tags="|release-hera|wingpanel|plank|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26421" PostTypeId="1" CreationDate="2021-01-30T11:02:48.370" Score="0" ViewCount="654" Body="&lt;p&gt;I would like to know whether HP Envy 15 2020 model is compatible with linux distros or not?&#xA;I am going to buy one of these new products, to be more specific the HP Envy 15 ep0123tx.&#xA;I have read many reviews regard this issue and it looks that there are some screen issues, only half of the screen is displayed.&#xA;Anyone has any experience of installing linux on these new laptops please share your ideas.&#xA;thank you.&lt;/p&gt;&#xA;" OwnerUserId="25021" LastActivityDate="2024-01-11T19:05:40.983" Title="is hp envy 15 2020 model compatible with linux distros?" Tags="|release-loki|release-freya|release-hera|system-installation|system|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26422" PostTypeId="1" CreationDate="2021-01-30T11:37:18.903" Score="0" ViewCount="48" Body="&lt;p&gt;i bought a cheap Touchpad (Speedlink Sway), but only the pointer works.&#xA;I can't use the tap, nor the hardware keys.&lt;/p&gt;&#xA;&lt;p&gt;Device:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Bus 003 Device 008: ID 062a:2901 Creative Labs &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Xinput:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;⎡ Virtual core pointer                      id=2    [master pointer  (3)]&#xA;⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]&#xA;⎜   ↳ Paten    USB Gaming Mouse                     id=17   [slave  pointer  (2)]&#xA;⎜   ↳ HID 0566:3013 Consumer Control            id=14   [slave  pointer  (2)]&#xA;⎜   ↳ iTouch Pad iTouch Pad Mouse               id=18   [slave  pointer  (2)]&#xA;⎜   ↳ iTouch Pad iTouch Pad Consumer Control    id=11   [slave  pointer  (2)]&#xA;⎣ Virtual core keyboard                     id=3    [master keyboard (2)]&#xA;    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=6    [slave  keyboard (3)]&#xA;    ↳ Video Bus                                 id=7    [slave  keyboard (3)]&#xA;    ↳ Power Button                              id=8    [slave  keyboard (3)]&#xA;    ↳ Sleep Button                              id=9    [slave  keyboard (3)]&#xA;    ↳ HID 0566:3013 System Control              id=15   [slave  keyboard (3)]&#xA;    ↳ HID 0566:3013 Consumer Control            id=19   [slave  keyboard (3)]&#xA;    ↳ HID 0566:3013                             id=13   [slave  keyboard (3)]&#xA;    ↳ HID 0566:3013                             id=16   [slave  keyboard (3)]&#xA;    ↳ iTouch Pad iTouch Pad Consumer Control    id=12   [slave  keyboard (3)]&#xA;    ↳ iTouch Pad iTouch Pad                     id=10   [slave  keyboard (3)]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Props:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xinput watch-props 18&#xA;Device 'iTouch Pad iTouch Pad Mouse':&#xA;    Device Enabled (177):   1&#xA;    Coordinate Transformation Matrix (179): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000&#xA;    libinput Natural Scrolling Enabled (316):   1&#xA;    libinput Natural Scrolling Enabled Default (317):   0&#xA;    libinput Scroll Methods Available (320):    0, 0, 1&#xA;    libinput Scroll Method Enabled (321):   0, 0, 1&#xA;    libinput Scroll Method Enabled Default (322):   0, 0, 0&#xA;    libinput Button Scrolling Button (323): 1&#xA;    libinput Button Scrolling Button Default (324): 2&#xA;    libinput Middle Emulation Enabled (325):    1&#xA;    libinput Middle Emulation Enabled Default (326):    0&#xA;    libinput Accel Speed (327): 0.000000&#xA;    libinput Accel Speed Default (328): 0.000000&#xA;    libinput Accel Profiles Available (329):    1, 1&#xA;    libinput Accel Profile Enabled (330):   0, 0&#xA;    libinput Accel Profile Enabled Default (331):   1, 0&#xA;    libinput Left Handed Enabled (332): 0&#xA;    libinput Left Handed Enabled Default (333): 0&#xA;    libinput Send Events Modes Available (301): 1, 0&#xA;    libinput Send Events Mode Enabled (302):    0, 0&#xA;    libinput Send Events Mode Enabled Default (303):    0, 0&#xA;    Device Node (304):  &amp;quot;/dev/input/event9&amp;quot;&#xA;    Device Product ID (305):    1578, 10497&#xA;    libinput Drag Lock Buttons (318):   &amp;lt;no items&amp;gt;&#xA;    libinput Horizontal Scroll Enabled (319):   1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Keys:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xinput get-button-map 18&#xA;1 2 3 4 5 6 7 8 9 &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But xev (nor KeyMon) does not show any reaction if I use the hardware keys or the tap function.&#xA;Strange thing: I can use tap-hold to use the scrolling-function, but xev also does not show any reaction.&#xA;Anyway: I can't use the touchpad, because I can't use a left, nor a right click.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions?&#xA;TIA&#xA;Mierscheid&lt;/p&gt;&#xA;" OwnerUserId="24918" LastActivityDate="2024-03-24T16:01:55.193" Title="Can not click on a touchpad" Tags="|touchpad|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26423" PostTypeId="2" ParentId="26414" CreationDate="2021-01-30T11:47:42.273" Score="1" Body="&lt;p&gt;I know exactly this problem. :-)&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Dock, right click: Settings.&lt;/li&gt;&#xA;&lt;li&gt;Set the Theme to &amp;quot;Matte&amp;quot;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Now you can see the blue indicator.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U6Xw2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U6Xw2.png&quot; alt=&quot;Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1VCpn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1VCpn.png&quot; alt=&quot;Dock&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24918" LastActivityDate="2021-01-30T11:47:42.273" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26424" PostTypeId="1" CreationDate="2021-01-30T13:20:27.627" Score="0" ViewCount="756" Body="&lt;p&gt;Is it possible at all to login to elementary os as root.  I enabled root account by setting a password. To make root appear as one of the login accounts on the GUI login screen, what are the next steps?&lt;br /&gt;&#xA;Is there a file that I need to edit to let root appear in the login screen?  E.g., Ubuntu has it in /etc/gdm3 directory.  something similar in elementary ?&#xA;Thanks for your time.&#xA;Jung&lt;/p&gt;&#xA;" OwnerUserId="25022" LastActivityDate="2024-02-16T21:05:35.660" Title="root login from GUI" Tags="|greeter|root|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26425" PostTypeId="1" CreationDate="2021-01-30T13:23:47.220" Score="0" ViewCount="410" Body="&lt;p&gt;Hello every one I recently intalled Elementary OS and now I get some issues when trying to add new repositorys.&lt;/p&gt;&#xA;&lt;p&gt;I wanted to install Elementary OS tweaks and I'm getting the following error&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Executing: /tmp/apt-key-gpghome.tbWHnlELWh/gpg.1.sh --keyserver keyserver.ubuntu.com --recv &#xA;c42d52715a84c7d0d02fc740c1d89326b1c71ab9&#xA;gpg: Schlüssel C1D89326B1C71AB9: Öffentlicher Schlüssel &amp;quot;Launchpad PPA for Philip Scott&amp;quot; &#xA;importiert&#xA;gpg: Anzahl insgesamt bearbeiteter Schlüssel: 1&#xA;gpg:               importiert: 1&#xA;gpg: invalid key resource URL '/tmp/apt-key-gpghome.tbWHnlELWh/home:manuelschneid3r.asc.gpg'&#xA;gpg: Schlüsselblockhilfsmittel`(null)': Allgemeiner Fehler&#xA;gpg: key 7721F63BD38B4796: 2 Beglaubigungen wegen fehlender Schlüssel nicht geprüft&#xA;gpg: key 1488EB46E192A257: 1 Beglaubigung wegen fehlendem Schlüssel nicht geprüft&#xA;gpg: key 1488EB46E192A257: 1 Beglaubigung wegen fehlendem Schlüssel nicht geprüft&#xA;gpg: key 3B4FE6ACC0B21F32: 3 Beglaubigungen wegen fehlender Schlüssel nicht geprüft&#xA;gpg: key D94AA3F0EFE21092: 3 Beglaubigungen wegen fehlender Schlüssel nicht geprüft&#xA;gpg: key 871920D1991BC93C: 1 Beglaubigung wegen fehlendem Schlüssel nicht geprüft&#xA;gpg: Anzahl insgesamt bearbeiteter Schlüssel: 13&#xA;gpg:       ignorierte neue Schlüssel: 13&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When using the following command: &lt;code&gt;sudo apt-key adv --keyserver keyserver.ubuntu.com --recv c42d52715a84c7d0d02fc740c1d89326b1c71ab9&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried to follow the instruction on the tweaks github page: &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I am also new to linux and don't know if the error is maybe on my side here.&lt;/p&gt;&#xA;&lt;p&gt;Furtheremore I got a similar issue with nodejs: &lt;a href=&quot;https://github.com/nodesource/distributions/blob/master/README.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/nodesource/distributions/blob/master/README.md&lt;/a&gt;&lt;br /&gt;&#xA;Therefore it could be a configuration issue in the os.&lt;/p&gt;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="25023" LastEditorUserId="15904" LastEditDate="2021-02-13T21:37:06.970" LastActivityDate="2024-02-29T05:02:00.293" Title="&quot;Invalid key resource URL&quot; When adding key for Elementary tweaks" Tags="|apt|ppa|tweak-tool|gpg|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26427" PostTypeId="2" ParentId="22559" CreationDate="2021-01-30T20:49:50.613" Score="0" Body="&lt;p&gt;I could resolve the issue by just restarting the network-manager after installing.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo service network-manager restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24993" LastActivityDate="2021-01-30T20:49:50.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26428" PostTypeId="2" ParentId="26232" CreationDate="2021-01-31T01:59:01.747" Score="0" Body="&lt;p&gt;The &lt;code&gt;amavisd&lt;/code&gt; log suggests that your system hostname is not a fully-qualified domain name (FQDN). What does&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ hostnamectl status&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and/or&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ cat /etc/hostname&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;tell you? You may need to change it (via &lt;code&gt;hostnamectl&lt;/code&gt; or by editing &lt;code&gt;/etc/hostname&lt;/code&gt;, respectively) to a resolvable domain name, i.e., &lt;code&gt;yourdomain.tld&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="24889" LastActivityDate="2021-01-31T01:59:01.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26429" PostTypeId="1" AcceptedAnswerId="26440" CreationDate="2021-01-31T09:12:10.190" Score="0" ViewCount="65" Body="&lt;p&gt;I have a desktop computer, my first in about 15 years. I'm used to laptops where you control display brightness with hotkeys.&lt;/p&gt;&#xA;&lt;p&gt;I notice that Elementary OS Hera (5.1.7) has a display brightness control slider in its wingpanel and also in its power settings. But it does nothing. Is this expected behavior for a desktop computer or an external display? Or should the control be working?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/5465/how-to-reduce-the-brightness-of-a-desktop-pc&quot;&gt;How to reduce the brightness of a desktop pc?&lt;/a&gt; is somewhat-related, but not the same question. They are asking how to reduce brightness. I'm asking whether the existing controls eOS provides should work and thus whether I have some troubleshooting to do...&lt;/p&gt;&#xA;" OwnerUserId="23095" LastActivityDate="2021-02-02T12:35:19.577" Title="Is brightness control supposed to work on desktop systems / external displays?" Tags="|settings|display|brightness|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26430" PostTypeId="2" ParentId="26407" CreationDate="2021-01-31T09:53:59.640" Score="0" Body="&lt;p&gt;I have exactly the same problem.&#xA;I've also noticed that apps installed as flatpaks from the get-go are more likely not to have such behavior, but if you first installed the app from a repo than deleted it and installed the same, but from flathub this time, the issue with duplicated, blurry icons takes place. I remember back in the day of elementary OS 0.2 Luna there was the same kind of problem with regular Google Chrome installed from Google website.&lt;/p&gt;&#xA;" OwnerUserId="25026" LastActivityDate="2021-01-31T09:53:59.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26431" PostTypeId="2" ParentId="25907" CreationDate="2021-01-31T10:10:16.350" Score="0" Body="&lt;p&gt;I've seen exactly the same couple of issues. I can also add that sometimes applications installed from flathub (LibreOffice) can have normal plank icons with no duplicates, but at the same time they have a gear-icon in the multitasking view.&lt;/p&gt;&#xA;" OwnerUserId="25026" LastActivityDate="2021-01-31T10:10:16.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26432" PostTypeId="1" CreationDate="2021-01-31T13:59:40.090" Score="0" ViewCount="777" Body="&lt;p&gt;terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;result:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Hit:1 http://packages.microsoft.com/repos/vscode stable InRelease                                   &#xA;Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease                                   &#xA;Get:3 http://packages.elementary.io/appcenter bionic InRelease [5,909 B]                            &#xA;Get:4 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [292 kB]            &#xA;Hit:5 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                         &#xA;Hit:6 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease                     &#xA;Hit:7 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease               &#xA;Get:8 https://mega.nz/linux/MEGAsync/xUbuntu_18.04 ./ InRelease [2,473 B]                           &#xA;Hit:9 http://dz.archive.ubuntu.com/ubuntu bionic InRelease                                          &#xA;Hit:10 http://dz.archive.ubuntu.com/ubuntu bionic-updates InRelease                                 &#xA;Hit:11 http://dz.archive.ubuntu.com/ubuntu bionic-backports InRelease                               &#xA;Fetched 300 kB in 22s (13.5 kB/s)                                                                   &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;All packages are up to date.&#xA;N: Skipping acquire of configured file 'main/binary-arm64/Packages' as repository 'http://packages.microsoft.com/repos/vscode stable InRelease' doesn't support architecture 'arm64'&#xA;N: Skipping acquire of configured file 'main/binary-armhf/Packages' as repository 'http://packages.microsoft.com/repos/vscode stable InRelease' doesn't support architecture 'armhf'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25029" LastActivityDate="2024-02-18T13:00:30.110" Title="How to fix N: Skipping acquire of configured file" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26433" PostTypeId="2" ParentId="26422" CreationDate="2021-01-31T14:38:24.507" Score="0" Body="&lt;p&gt;I seem to recall encountering this too. Have you had a look at &lt;em&gt;system settings &amp;gt; mouse &amp;amp; touchpad &amp;gt; devices &amp;gt; touchpad&lt;/em&gt; and then enable &amp;quot;Tap to click&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kgtmY.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kgtmY.png&quot; alt=&quot;settings window&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25030" LastActivityDate="2021-01-31T14:38:24.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26434" PostTypeId="2" ParentId="26429" CreationDate="2021-01-31T14:46:54.393" Score="1" Body="&lt;p&gt;(Above answer is more helpful :D)&lt;/p&gt;&#xA;&lt;p&gt;It is quite common for attached external monitors to not have bound brightness controls in the same way laptops do. To adjust brightness of the external monitors I would suggest using the brightness controls on the monitor itself (As it's the least hack-ey and will reduce power consumption if you are planning to turn the brightness down). The monitor controls will be accessible from a menu button often located close to the power button of the monitor.&lt;/p&gt;&#xA;&lt;p&gt;If you do have your heart set on changing brightness from within elementary (or any OS really) you'll need to start by having a hunt around for the correct drivers - if they exist in any usable form.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps&lt;/p&gt;&#xA;" OwnerUserId="25030" LastEditorUserId="25030" LastEditDate="2021-02-02T12:35:19.577" LastActivityDate="2021-02-02T12:35:19.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26435" PostTypeId="2" ParentId="26424" CreationDate="2021-01-31T14:57:02.203" Score="0" Body="&lt;p&gt;When you say &amp;quot;root&amp;quot; do you mean a user named &amp;quot;root&amp;quot; (the default sudo username) or do you just mean logging in with root privileges?&lt;/p&gt;&#xA;&lt;p&gt;What do you need to do with a root login?&lt;/p&gt;&#xA;&lt;p&gt;Thanks, Col&lt;/p&gt;&#xA;" OwnerUserId="25030" LastActivityDate="2021-01-31T14:57:02.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26436" PostTypeId="2" ParentId="26415" CreationDate="2021-01-31T15:05:01.377" Score="0" Body="&lt;p&gt;I don't know what you've already tried but if it's not your keyboard hardware that's the problem:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Check that your keyboard layout matches your keyboard &lt;em&gt;(Keyboard &amp;gt; Layout)&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Check to see that something happens when you use &lt;code&gt;xev | awk /keysym/'{sub(/\)\,/,&amp;quot;&amp;quot;, $7); print $7}' &lt;/code&gt; in a console window and press Shift a bunch.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If you do get a result with &lt;code&gt;xev&lt;/code&gt; Then your key is definitely working, and you likely just need to change your keyboard layout/mapping. If not, you may need to look at getting a new keyboard.&lt;/p&gt;&#xA;&lt;p&gt;Good luck, Col&lt;/p&gt;&#xA;" OwnerUserId="25030" LastActivityDate="2021-01-31T15:05:01.377" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26437" PostTypeId="2" ParentId="21104" CreationDate="2021-01-31T16:07:26.717" Score="0" Body="&lt;p&gt;Same happening with me too :(&lt;/p&gt;&#xA;&lt;p&gt;My Logs:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Jan 31 20:51:37 x gala.desktop[1486]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x1c00003 (wingpanel)&#xA;Jan 31 20:51:37 x wingpanel[1505]: DBusService.vala:64: Service registration suceeded&#xA;Jan 31 20:51:38 x dbus-daemon[840]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service' requested by ':1.73' (uid=1000 pid=1955 comm=&amp;quot;/usr/lib/x86_64-linux-gnu/io.elementary.wingpanel.&amp;quot; label=&amp;quot;unconfined&amp;quot;)&#xA;Jan 31 20:51:45 x gala.desktop[1486]: Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2e00015 (io.element)&#xA;Jan 31 20:51:46 x PackageKit: get-packages transaction /366_cdadccee from uid 1000 finished with success after 783ms&#xA;Jan 31 20:51:50 x PackageKit: search-name transaction /367_aaadcbea from uid 1000 finished with success after 765ms&#xA;Jan 31 20:51:50 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:51:50 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:51:50 x nm-applet[1573]: Can't set a parent on widget which has a parent&#xA;Jan 31 20:51:50 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:51:50 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:51:50 x nm-applet[1573]: Can't set a parent on widget which has a parent&#xA;Jan 31 20:52:14 x PackageKit: refresh-cache transaction /368_baaaaabd from uid 1000 finished with cancelled after 24620ms&#xA;Jan 31 20:52:17 x PackageKit: search-name transaction /369_ebaaddcb from uid 1000 finished with success after 1987ms&#xA;Jan 31 20:52:17 x PackageKit: get-details transaction /370_bedcecda from uid 1000 finished with success after 416ms&#xA;Jan 31 20:52:18 x PackageKit: depends-on transaction /371_bcbacecd from uid 1000 finished with success after 416ms&#xA;Jan 31 20:52:18 x PackageKit: get-details transaction /372_aeaaaead from uid 1000 finished with success after 419ms&#xA;Jan 31 20:52:19 x PackageKit: search-name transaction /373_ccddeebc from uid 1000 finished with success after 457ms&#xA;Jan 31 20:52:19 x PackageKit: get-details transaction /374_eacbccea from uid 1000 finished with success after 420ms&#xA;Jan 31 20:52:20 x PackageKit: depends-on transaction /375_ebddeedd from uid 1000 finished with success after 419ms&#xA;Jan 31 20:52:20 x PackageKit: get-details transaction /376_dcdcccea from uid 1000 finished with success after 419ms&#xA;Jan 31 20:52:21 x PackageKit: search-name transaction /377_beacbdbd from uid 1000 finished with success after 452ms&#xA;Jan 31 20:52:21 x PackageKit: get-details transaction /378_dcbeaeaa from uid 1000 finished with success after 425ms&#xA;Jan 31 20:52:22 x PackageKit: get-packages transaction /379_cedadaeb from uid 1000 finished with success after 645ms&#xA;Jan 31 20:52:22 x PackageKit: get-updates transaction /380_acbcbbee from uid 1000 finished with success after 572ms&#xA;Jan 31 20:52:53 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:52:53 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:52:53 x nm-applet[1573]: Can't set a parent on widget which has a parent&#xA;Jan 31 20:52:53 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:52:53 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:52:53 x nm-applet[1573]: Can't set a parent on widget which has a parent&#xA;Jan 31 20:53:56 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jan 31 20:53:56 x nm-applet[1573]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25033" LastActivityDate="2021-01-31T16:07:26.717" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26439" PostTypeId="2" ParentId="26323" CreationDate="2021-01-31T17:40:21.403" Score="0" Body="&lt;p&gt;yes, you can switch to elementary os (linux) and you will find all your tools and ides&lt;/p&gt;&#xA;&lt;p&gt;but if you are a new user to linux i recommend start with ubuntu Because you will find a lot of guides and tutorials online and you can switch to elementary os later on&lt;/p&gt;&#xA;&lt;p&gt;And I'll give you advice the descriptions don't mater they are all the same&lt;/p&gt;&#xA;&lt;p&gt;you can change the look for your description by search for how to change desktop environment for your description (ubuntu)&lt;/p&gt;&#xA;&lt;p&gt;if you any Questions hesitate&lt;/p&gt;&#xA;" OwnerUserId="25029" LastActivityDate="2021-01-31T17:40:21.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26440" PostTypeId="2" ParentId="26429" CreationDate="2021-01-31T21:00:23.983" Score="3" Body="&lt;p&gt;This is not specific to a elementary. External monitors configurations are managed by themselves. You can control your laptops brightness because the monitor is directly managed by your laptops drivers. This applies to Windows and macOS as well.&#xA;There are many tools to workaround this but no OS provides this as native functionality.&lt;/p&gt;&#xA;" OwnerUserId="25037" LastActivityDate="2021-01-31T21:00:23.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26441" PostTypeId="2" ParentId="25871" CreationDate="2021-01-31T21:15:31.043" Score="0" Body="&lt;p&gt;You can run it with &lt;code&gt;env XLIB_SKIP_ARGB_VISUALS=1 flatpak run org.gnu.emacs&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I used AppEditor to make a new menu entry.&lt;/p&gt;&#xA;" OwnerUserId="25038" LastActivityDate="2021-01-31T21:15:31.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26442" PostTypeId="1" AcceptedAnswerId="26446" CreationDate="2021-02-01T00:42:32.887" Score="0" ViewCount="115" Body="&lt;p&gt;I see you can find this curated apps directory in the web, but where are they or how can I locate them by properly using AppCenter? I can't find them.&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="25039" LastActivityDate="2021-02-01T14:07:16.767" Title="Made for elementary apps in AppCenter" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26443" PostTypeId="1" AcceptedAnswerId="26448" CreationDate="2021-02-01T10:27:43.150" Score="0" ViewCount="35" Body="&lt;p&gt;I would like an extra machine to do basic webbrowsing on. I have for example an old PowerBook Pro 3,1 with a 15&amp;quot; screen available. Mostly for ecological reasons I would like to use old hardware while it is still working. Firefox is not supported anymore and webbrowsing is practically impossible.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Could I install elementary OS on it to use supported version of a webbrowser?&lt;/li&gt;&#xA;&lt;li&gt;Preferably on dual boot. There is a specific old Mac application on it that needs to run occasionally.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Specs:&lt;/p&gt;&#xA;&lt;p&gt;Intel Core 2 Duo&#xA;2,2Ghz&#xA;4Mb level 2 cache&#xA;800Mhz bus speed&#xA;BootROM version MBP31.0070.B07&#xA;SMC Version 1.16f11&lt;/p&gt;&#xA;&lt;p&gt;Samsung SSD 250Gb 840 EVO (suprise to me too, I was wondering where this SSD was)&lt;/p&gt;&#xA;&lt;p&gt;Currently with MacOS 10.5.8&lt;/p&gt;&#xA;&lt;p&gt;The DVD drive didn't work the past decade.&#xA;I must have some USB-sticks lying around I could use and I have a Timemachine backup of this Mac on an external USB-drive.&#xA;It doesn't work on a battery anymore, has died years ago.&lt;/p&gt;&#xA;" OwnerUserId="25044" LastActivityDate="2021-02-01T21:20:42.880" Title="Install on old Apple PowerBook Pro 3,1 without dvd" Tags="|dual-boot|intel|ssd|apple|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26445" PostTypeId="2" ParentId="26424" CreationDate="2021-02-01T14:00:31.230" Score="0" Body="&lt;p&gt;Logging in through a graphical user interface as &lt;em&gt;root&lt;/em&gt; is considered a security risk, so most display managers aren't going to cater to this.&#xA;You should almost always use &lt;code&gt;sudo&lt;/code&gt; to execute commands as &lt;em&gt;root&lt;/em&gt;.&#xA;If you would like a &lt;em&gt;root&lt;/em&gt; shell, then on Debian-based systems such as elementaryOS, log in as your normal user and run &lt;code&gt;sudo su&lt;/code&gt; from the terminal.&#xA;If you need to avoid logging in as a normal user, either boot in to emergency / single-user mode by selecting the option from the Grub menu or switch to a different, non-graphical &lt;em&gt;TTY&lt;/em&gt; with &lt;em&gt;Ctrl-Alt-F2&lt;/em&gt;, for example, and login that way as root.&#xA;You can switch back to the display manager with &lt;em&gt;Ctrl-Alt-F7&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-01T14:00:31.230" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26446" PostTypeId="2" ParentId="26442" CreationDate="2021-02-01T14:07:16.767" Score="0" Body="&lt;p&gt;Curated apps are advertised in AppCenter's home page when you open the app and they are listed first in any category listing before non-curated apps, as you seem to have discovered by your comment.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-01T14:07:16.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26447" PostTypeId="2" ParentId="26422" CreationDate="2021-02-01T16:20:10.260" Score="0" Body="&lt;p&gt;Of course I had. :-)&#xA;I can choose whatever I want: Nothing happens.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4kSHC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4kSHC.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24918" LastActivityDate="2021-02-01T16:20:10.260" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26448" PostTypeId="2" ParentId="26443" CreationDate="2021-02-01T21:04:42.557" Score="0" Body="&lt;p&gt;First, you should take into account whether you have enough RAM to meet the &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;minimum system requirements&lt;/a&gt; of 4 GB.&#xA;Trying to run on less than that, particularly with a web browser, may be a bit much for your machine.&#xA;Assuming the RAM is sufficient, elementaryOS should be a good fit for your use case, albeit installing Linux on older Mac hardware with Nvidia GPU's can be quite involved.&#xA;&lt;a href=&quot;https://linux-hardware.org/?view=computers&amp;amp;type=Notebook&amp;amp;vendor=Apple&amp;amp;model=MacBookPro3%2C1&quot; rel=&quot;nofollow noreferrer&quot;&gt;A query of the MacbookPro3,1 on linux-hardware.org&lt;/a&gt; shows that people have been able to get Linux running on your specific model which bodes well. There is also a &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple/MacBook/3-1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Macbook3,1 Debian Wiki page&lt;/a&gt; which may come in handy.&lt;/p&gt;&#xA;&lt;p&gt;There's an important consideration for older Macbooks, which is indicated in &lt;a href=&quot;http://simberman.com/posts/macbookpro/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this blog post for installing Linux on a MacbookPro3,1&lt;/a&gt;.&#xA;For the graphics drivers to work properly, you may need to install so that Linux boots in legacy BIOS mode as opposed to EFI, which most modern Linux installers will use by default.&#xA;It looks like someone was able to install Ubuntu in Legacy BIOS mode alongside a macOS installation according to &lt;a href=&quot;https://askubuntu.com/a/401934/1117671&quot;&gt;this AskUbuntu answer&lt;/a&gt;.&#xA;Another alternative is to use a hybrid MBR / EFI partition to keep macOS installed while booting Linux in legacy BIOS mode but this appears to be very difficult to maintain and fragile.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, I've had success installing elementaryOS on a 2010 Macbook such that it boots in legacy BIOS mode but at the cost of removing macOS entirely.&#xA;To do this you'll need to manually partition the disk during installation and make the first partition a Legacy BIOS partition 1 MiB in size.&#xA;Make sure &lt;em&gt;not&lt;/em&gt; to create an EFI partition even if the installer warns you that the machine may not boot.&#xA;You'll need to create a root partition and if you like, a swap partition, at the minimum.&#xA;To still have access to macOS if you choose this route, you might just use your existing hard disk for macOS and a separate hard disk for Linux.&#xA;You'd have to physically swap your disks whenever you want to switch of course.&lt;/p&gt;&#xA;&lt;p&gt;Before doing any kind of partitioning or installation, I recommend creating a backup installer of macOS on a spare USB drive in case you need to reinstall macOS from scratch.&#xA;Instructions for doing this are provided by Apple &lt;a href=&quot;https://support.apple.com/en-us/HT201372&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;You'll also want to double-check your Time Machine backups are valid and that you'll be able to access them from another functional Mac if necessary.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-01T21:20:42.880" LastActivityDate="2021-02-01T21:20:42.880" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26449" PostTypeId="2" ParentId="26421" CreationDate="2021-02-01T21:45:21.877" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://linux-hardware.org/?view=computers&amp;amp;year=2020&amp;amp;type=Notebook&amp;amp;vendor=Hewlett-Packard&amp;amp;model=ENVY+Laptop+15-ep0xxx&quot; rel=&quot;nofollow noreferrer&quot;&gt;This query&lt;/a&gt; on &lt;a href=&quot;https://linux-hardware.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linux-hardware.org&lt;/a&gt; shows that some people have been able to get Linux working on that specific model.&#xA;You might check the individual hardware probes for any particular hardware issues.&#xA;Since at least one probe is Ubuntu 20.04, it's likely the device will work with elementaryOS even if this requires the newer kernel in 20.04 since Ubuntu backports Linux kernels through its hardware-enablement stack to older LTS releases, i.e. Ubuntu 18.04 which elementaryOS 5 is based-on.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-01T21:45:21.877" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26450" PostTypeId="2" ParentId="25687" CreationDate="2021-02-01T22:18:20.447" Score="0" Body="&lt;p&gt;On terminal, use: sudo apt remove name-of-the-app.&lt;/p&gt;&#xA;&lt;p&gt;For example: &lt;code&gt;sudo apt remove pantheon-mail&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="25046" LastActivityDate="2021-02-01T22:18:20.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26451" PostTypeId="1" AcceptedAnswerId="26452" CreationDate="2021-02-02T06:38:57.857" Score="1" ViewCount="1940" Body="&lt;p&gt;I know that --user is enabled by default in Hera 5.1.7. But is it possible at all to install flatpaks system-wide for all users by command-line?&lt;/p&gt;&#xA;&lt;p&gt;I have tried&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo flatpak install --system com.github.wwmm.pulseeffects&#xA;Looking for matches…&#xA;error: No remote refs found similar to ‘com.github.wwmm.pulseeffects’&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;whereas&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak install com.github.wwmm.pulseeffects&#xA;Looking for matches…&#xA;Found similar ref(s) for ‘com.github.wwmm.pulseeffects’ in remote ‘flathub’ (user).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Is system-wide installation disabled completely? Is there a way to enable it for command-line installs?&lt;/p&gt;&#xA;" OwnerUserId="23095" LastActivityDate="2021-02-02T13:28:59.047" Title="How do I install flatpak apps systemwide via command-line?" Tags="|command-line|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26452" PostTypeId="2" ParentId="26451" CreationDate="2021-02-02T13:19:30.447" Score="2" Body="&lt;p&gt;You have to add remotes separately for user and system installations.&#xA;This same thing caused me a bit of confusion.&#xA;The error message you received indicates that you probably just need to set up a system remote. To add Flathub as a system remote you would use the following command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo flatpak remote-add --if-not-exists --system flathub \&#xA;  https://flathub.org/repo/flathub.flatpakrepo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then just use &lt;code&gt;sudo&lt;/code&gt; and the &lt;code&gt;--system&lt;/code&gt; flag when running system-wide Flatpak commands.&#xA;For example, the following command installs PulseEffects system-wide.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo flatpak install --system flathub com.github.wwmm.pulseeffects&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once a system remote has been configured, Flatpaks can be installed system-wide directly from AppCenter.&#xA;Just note that it might require a restart for the option to appear.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-02T13:28:59.047" LastActivityDate="2021-02-02T13:28:59.047" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26453" PostTypeId="2" ParentId="25117" CreationDate="2021-02-02T13:36:13.587" Score="0" Body="&lt;p&gt;You just need to add the Flatpak remote manually or side-load a single app manually from a remote to make applications from that remote available in AppCenter.&#xA;This is described in the &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub setup documentation for elementaryOS&lt;/a&gt;.&#xA;To add Flathub as a remote without side-loading, just type the following command on the command-line.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak remote-add --if-not-exists flathub \&#xA;  https://flathub.org/repo/flathub.flatpakrepo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once this completes, restart and AppCenter will show applications from Flathub.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-02T13:36:13.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26454" PostTypeId="2" ParentId="25065" CreationDate="2021-02-02T13:39:34.407" Score="1" Body="&lt;p&gt;It is possible to manage system-wide Flatpaks from within AppCenter.&#xA;You have to add a system remote to make this functionality available.&#xA;To add Flathub as a system remote you would use the following command in Terminal.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo flatpak remote-add --if-not-exists --system flathub \&#xA;  https://flathub.org/repo/flathub.flatpakrepo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once a system remote has been configured, Flatpaks can be installed system-wide directly from AppCenter.&#xA;Just note that it might require a restart for the option to appear.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-02T13:39:34.407" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26455" PostTypeId="2" ParentId="26432" CreationDate="2021-02-02T14:40:55.527" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/microsoft/vscode/issues/114137&quot; rel=&quot;nofollow noreferrer&quot;&gt;VSCode issue #114137&lt;/a&gt; appears to be the problem.&#xA;It looks like only the new repository location has the &lt;code&gt;arm64&lt;/code&gt; and &lt;code&gt;armhf&lt;/code&gt; packages, so updating the URL should fix the warnings.&#xA;The repository's URL has changed from &lt;code&gt;http://packages.microsoft.com/repos/vscode&lt;/code&gt; to &lt;code&gt;http://packages.microsoft.com/repos/code&lt;/code&gt; as described in &lt;a href=&quot;https://github.com/microsoft/vscode/issues/112223&quot; rel=&quot;nofollow noreferrer&quot;&gt;issue #112223&lt;/a&gt;.&#xA;To fix this, update the file &lt;code&gt;/etc/apt/sources.list.d/vscode.list&lt;/code&gt; to point to the new location as shown below.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb [arch=amd64,arm64,armhf] http://packages.microsoft.com/repos/code stable main&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-02T14:40:55.527" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26459" PostTypeId="2" ParentId="19317" CreationDate="2021-02-02T23:28:27.913" Score="1" Body="&lt;p&gt;In Terminal's settings, toggle off &lt;em&gt;Natural Copy/Paste&lt;/em&gt; as shown in the image below.&#xA;Now &lt;em&gt;Ctrl+C&lt;/em&gt; should work as you expect.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/csSND.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/csSND.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-02T23:28:27.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26460" PostTypeId="1" CreationDate="2021-02-03T06:42:23.440" Score="0" ViewCount="105" Body="&lt;p&gt;After installing elementary OS, I went through the installation procedure for mongodb community server on &lt;a href=&quot;https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.mongodb.com/manual/tutorial/install-mongodb-on-ubuntu/&lt;/a&gt;, but when I am trying to install the package mongodb-org using &lt;code&gt;sudo apt-get install -y mongodb-org&lt;/code&gt; (or even the unofficial package, &lt;code&gt;mongodb&lt;/code&gt;), then it's throwing the following error :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; mongodb-org : Depends: mongodb-org-shell but it is not going to be installed&#xA;               Depends: mongodb-org-server but it is not going to be installed&#xA;               Depends: mongodb-org-mongos but it is not going to be installed&#xA;E: Unable to correct problems, you have held broken packages`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I even tried to installing it using a .DEB file, but it's throwing the same error. I have also tried &lt;code&gt;apt --fix-broken install&lt;/code&gt; &amp;amp; &lt;code&gt;sudo apt -f install&lt;/code&gt;. If this issue is not resolved then I might as well change change the OS.&lt;/p&gt;&#xA;" OwnerUserId="11841" LastActivityDate="2024-02-18T22:08:15.973" Title="Unable to install mongodb community server on elementary OS 5.1 Hera" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26461" PostTypeId="2" ParentId="21977" CreationDate="2021-02-03T12:29:16.447" Score="0" Body="&lt;p&gt;It looks like support for the Microsoft Surface Laptop 3 has yet to be mainlined.&#xA;However, there appears to be support for it from the &lt;a href=&quot;https://github.com/linux-surface/linux-surface&quot; rel=&quot;nofollow noreferrer&quot;&gt;linux-surface project&lt;/a&gt;.&#xA;You can find a dedicated page on your device &lt;a href=&quot;https://github.com/linux-surface/linux-surface/wiki/Surface-Laptop-3&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;I'm thinking you might be able to get your current installation working by using a &lt;code&gt;chroot&lt;/code&gt; from the installer and installing the linux-surface kernel according to &lt;a href=&quot;https://github.com/linux-surface/linux-surface/wiki/Installation-and-Setup#Debian--Ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;their instructions&lt;/a&gt;.&#xA;&lt;a href=&quot;https://wiki.debian.org/RescueLive&quot; rel=&quot;nofollow noreferrer&quot;&gt;Debian's RescueLive Wiki page&lt;/a&gt; has a great guide on how to &lt;code&gt;chroot&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-03T12:29:16.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26462" PostTypeId="2" ParentId="26460" CreationDate="2021-02-03T15:44:36.433" Score="0" Body="&lt;p&gt;You may have to remove the existing &lt;code&gt;mongodb&lt;/code&gt; package from Ubuntu entirely.&#xA;According to &lt;a href=&quot;https://stackoverflow.com/a/51418044/9835303&quot;&gt;this AskUbuntu answer&lt;/a&gt;, completely remove the existing installation from Ubuntu's repository.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get purge mongodb mongodb-server mongodb-server-core mongodb-clients&#xA;$ sudo apt-get purge mongodb-org&#xA;$ sudo apt-get autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then install the community edition.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get update&#xA;$ sudo apt-get install mongodb-org&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-03T15:44:36.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26464" PostTypeId="1" CreationDate="2021-02-03T17:24:29.370" Score="1" ViewCount="201" Body="&lt;p&gt;When booting my lenovo laptop, all I see is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Loading Linux 5.4.0-65-generic ...&#xA;Loading initial ramdisk ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then in hangs there forever.&lt;/p&gt;&#xA;&lt;p&gt;I used to be able to go into the GRUB menu and select &lt;code&gt;elementary, with Linux 5.4.0-40-generic&lt;/code&gt; and that would boot elementaryOS 5.1 successfully. But that option has now gone away in the GRUB menu. I believe what happened is at some point I ran &lt;code&gt;apt autoremove&lt;/code&gt;, which uninstalled that older linux kernel.&lt;/p&gt;&#xA;&lt;p&gt;My question is how do I reinstall the older linux kernel (&lt;code&gt;5.4.0-40-generic&lt;/code&gt;) or how do I figure out why the newer linux kernel (&lt;code&gt;5.4.0-65-generic&lt;/code&gt;) isn't working.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Edit&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;p&gt;Since I originally posted this, I have new information. I reinstalled elementary OS from a live USB and I found that will update the kernel to 5.4.0-65-generic and that boots just fine. I thought I had solved my problem, but then I ran &lt;code&gt;apt update&lt;/code&gt; and &lt;code&gt;apt upgrade&lt;/code&gt; and now my computer doesn't boot again. So I believe that sometime in the past month, one or multiple of those packages being upgraded is messing up the boot process on my laptop.&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled again, but this time only ran &lt;code&gt;apt update&lt;/code&gt; and here is what I get when I run &lt;code&gt;apt list --upgradeable&lt;/code&gt;: &lt;a href=&quot;https://paste.ubuntu.com/p/WwXHdkYkBx/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://paste.ubuntu.com/p/WwXHdkYkBx/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25066" LastEditorUserId="25066" LastEditDate="2021-02-04T15:46:54.513" LastActivityDate="2021-02-04T15:46:54.513" Title="Boot fails for linux 5.4.0-65-generic kernel" Tags="|boot|kernel|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26467" PostTypeId="2" ParentId="26425" CreationDate="2021-02-05T01:14:16.633" Score="0" Body="&lt;p&gt;It looks like this &lt;a href=&quot;https://askubuntu.com/a/1247655/1117671&quot;&gt;answer&lt;/a&gt; on AskUbuntu should fix the issue.&#xA;Apparently this is caused by a GPG signing key, perhaps for Albert Launcher?&#xA;Just delete the mentioned &lt;code&gt;manuelschneid3r&lt;/code&gt; key from your list of trusted keys.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /etc/apt/trusted.gpg.d/home:manuelschneid3r.*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If the key is indeed for the Albert Launcher, you should be able to safely re-add it by following the directions &lt;a href=&quot;https://software.opensuse.org/download.html?project=home:manuelschneid3r&amp;amp;package=albert&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; for the appropriate version of Ubuntu, i.e. on elementaryOS 5.1 use the following command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl -fsSL https://download.opensuse.org/repositories/home:manuelschneid3r/xUbuntu_18.04/Release.key \&#xA;  | gpg --dearmor \&#xA;  | sudo tee /etc/apt/trusted.gpg.d/home_manuelschneid3r.gpg &amp;gt; /dev/null&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you are on elementaryOS 5.1 Hera, the following commands should add the &lt;a href=&quot;https://launchpad.net/%7Ephilip.scott/+archive/ubuntu/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary-tweaks PPA&lt;/a&gt; to your system and install the tweaks package.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install software-properties-common&#xA;sudo add-apt-repository -uy ppa:philip.scott/elementary-tweaks&#xA;sudo apt -y install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In elementaryOS 6 Odin it looks like elementary-tweaks has become &lt;a href=&quot;https://launchpad.net/%7Ephilip.scott/+archive/ubuntu/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;pantheon-tweaks&lt;/a&gt;.&#xA;For elementaryOS 6 you should use the following commands to install the tweaks utility.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install software-properties-common&#xA;sudo add-apt-repository -uy ppa:philip.scott/pantheon-tweaks&#xA;sudo apt -y install pantheon-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-05T01:43:24.923" LastActivityDate="2021-02-05T01:43:24.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26468" PostTypeId="1" CreationDate="2021-02-05T09:58:25.893" Score="1" ViewCount="1291" Body="&lt;p&gt;Why is there no such command in elementary to clear the DNS cache?&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo /etc/init.d/dns-clean start&lt;/code&gt; command not found&lt;/p&gt;&#xA;" OwnerUserId="24697" LastEditorUserId="26" LastEditDate="2021-02-14T21:51:55.673" LastActivityDate="2021-02-14T21:51:55.673" Title="DNS Clean command not found" Tags="|release-hera|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26469" PostTypeId="2" ParentId="26468" CreationDate="2021-02-05T12:31:47.453" Score="2" Body="&lt;p&gt;Since elementaryOS 5 and newer, &lt;code&gt;systemd-resolve&lt;/code&gt; handles flushing the DNS cache.&#xA;This was an upstream change made in Ubuntu 17.04 according to &lt;a href=&quot;https://askubuntu.com/a/929478/1117671&quot;&gt;this AskUbuntu answer&lt;/a&gt;.&#xA;Use the following command to flush your DNS cache.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemd-resolve --flush-caches&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-05T12:31:47.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26470" PostTypeId="2" ParentId="25717" CreationDate="2021-02-05T13:40:11.270" Score="0" Body="&lt;p&gt;When Grub detects a &lt;em&gt;failure&lt;/em&gt; it will automatically use a 30 second timeout, ignoring the value of &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt;.&#xA;There is a variable to override this, &lt;code&gt;GRUB_RECORDFAIL_TIMEOUT&lt;/code&gt;, &lt;a href=&quot;https://askubuntu.com/a/244752/1117671&quot;&gt;described here&lt;/a&gt;.&#xA;You can set this variable to the value of &lt;code&gt;GRUB_TIMEOUT&lt;/code&gt; in &lt;code&gt;/etc/default/grub&lt;/code&gt; as shown below.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_TIMEOUT=0&#xA;GRUB_RECORDFAIL_TIMEOUT=$GRUB_TIMEOUT&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then just update Grub.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-05T13:40:11.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26472" PostTypeId="2" ParentId="18786" CreationDate="2021-02-06T03:40:46.147" Score="0" Body="&lt;p&gt;Unfortunately I'm getting the same problem, but recently discovered Emote, which seems a more functional alternative: &lt;a href=&quot;https://snapcraft.io/install/emote/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/install/emote/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24191" LastActivityDate="2021-02-06T03:40:46.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26473" PostTypeId="1" CreationDate="2021-02-06T08:08:09.747" Score="1" ViewCount="68" Body="&lt;p&gt;I'm a longtime macOS user and I discovered recently eOS. I like it for its minimalism and resemblance to macOS, and also because the eOS team seems dedicated to usability a lot. But when I look at the present situation of app menus in eOS I'm perplexed:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Native eOS apps have no app menu at all.&lt;/li&gt;&#xA;&lt;li&gt;Traditional apps have app menus.&lt;/li&gt;&#xA;&lt;li&gt;macOS has a global menubar on the top panel.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;My question is: &lt;strong&gt;What is the eOS team’s view on this topic?&lt;/strong&gt; What's the best usable approach on app menus? We need consistency on the whole system. Maybe eOS should adopt global app menus like macOS?&lt;/p&gt;&#xA;" OwnerUserId="25085" LastEditorUserId="24889" LastEditDate="2021-02-06T11:39:26.110" LastActivityDate="2024-02-25T20:06:25.803" Title="Application menu consistency" Tags="|wingpanel|user-interface|menu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26474" PostTypeId="1" CreationDate="2021-02-06T11:34:30.833" Score="0" ViewCount="72" Body="&lt;p&gt;I am currently running elementary OS Freya 0.3.1 and am looking for an upgrade.Which would be most suitable to upgrade too and how would I do this.I have seen some talking about clean installs,which version should I use and how would I do this.&#xA;Thanks&lt;/p&gt;&#xA;" OwnerUserId="25086" LastActivityDate="2024-02-21T18:05:25.790" Title="How to upgrade from elementary OS Freya 0.3.1?" Tags="|release-freya|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26476" PostTypeId="2" ParentId="26474" CreationDate="2021-02-06T12:56:46.823" Score="0" Body="&lt;p&gt;Currently, development is working towards elementaryOS 6 which should come out sometime this year, 2021.&#xA;At this time, elementaryOS 5.1 Hera, the latest release, is recommended.&#xA;You can grab the ISO from &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary's website&lt;/a&gt; and follow their &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation instructions&lt;/a&gt; to perform a &lt;em&gt;clean&lt;/em&gt; install.&#xA;This will overwrite all the data on your disk so first backup all your necessary data to the cloud, another computer, and/or an external drive.&#xA;Make sure to &lt;em&gt;test&lt;/em&gt; your backup so you're certain all of your important data is accessible and valid.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-06T12:56:46.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26477" PostTypeId="1" AcceptedAnswerId="26478" CreationDate="2021-02-06T14:58:33.060" Score="0" ViewCount="58" Body="&lt;p&gt;i installed elementaryOS on my iMac 2011 using this tutorial:&#xA;&lt;a href=&quot;https://aroman.github.io/elementary-on-a-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://aroman.github.io/elementary-on-a-mac/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;unfortunately i messed point 5. i ran &lt;code&gt;$ ubiquity&lt;/code&gt; without the -b flag.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5QxpE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5QxpE.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;now i cant boot to macOS using long press Option key on boot. iMac just boots straight to elementaryOS. below is what Gparted shows:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/omoXa.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/omoXa.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;how do i fix this? i would like to keep an old macOS like Snow Leopard around, while dedicating most storage to elementaryOS and other OSes i might want to try.&lt;/p&gt;&#xA;" OwnerUserId="12409" LastActivityDate="2021-02-06T20:56:37.047" Title="installed grub on imac, how to undo?" Tags="|boot|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26478" PostTypeId="2" ParentId="26477" CreationDate="2021-02-06T20:23:59.403" Score="1" Body="&lt;p&gt;The Grub bootloader will have been installed to the EFI partition and registered as the default bootloader with your Mac's firmware as documented in the Debian Wiki &lt;a href=&quot;https://wiki.debian.org/UEFI#debian-installer_support&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;That's why your Mac is booting directly to elementaryOS.&lt;/p&gt;&#xA;&lt;p&gt;To remedy this, you can do the next section of the tutorial, &lt;em&gt;Install rEFInd Boot Manager&lt;/em&gt;, directly from elementaryOS.&#xA;Installing rEFInd should allow you to boot into macOS again.&#xA;Installing rEFInd on Linux is documented on rEFInd's website &lt;a href=&quot;https://www.rodsbooks.com/refind/installing.html#packagefile&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;Below I outline the steps you need to follow to install rEFInd on elementaryOS and boot back into macOS.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Boot into elementaryOS.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Log in and open Terminal.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the &lt;code&gt;software-properties-common&lt;/code&gt; package so that you can easily add rEFInd's PPA repository.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Add the rEFInd PPA to your system.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -uy ppa:rodsmith/refind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Install rEFInd.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install refind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Confirm when asked if you want to install rEFInd to your ESP.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;That's all that is required to install rEFInd, so reboot.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;When the computer is booting, it should show the rEFInd menu.&#xA;Select the macOS option and press enter.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-06T20:56:37.047" LastActivityDate="2021-02-06T20:56:37.047" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26479" PostTypeId="1" CreationDate="2021-02-06T22:02:13.297" Score="1" ViewCount="295" Body="&lt;p&gt;I want to remove Elementary OS and want to get back to Windows but to install Windows i need to identity if 32-bit architecture or 64-bit architecture&#xA;and whet I open details about my current system - there is no details about it.&#xA;How to find it out?&lt;/p&gt;&#xA;" OwnerUserId="25088" LastActivityDate="2021-02-06T22:33:41.647" Title="How to Check if Your elementary System Is 32-bit or 64-bit" Tags="|64-bit|32-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26480" PostTypeId="2" ParentId="26479" CreationDate="2021-02-06T22:33:41.647" Score="2" Body="&lt;p&gt;Elementary is 64 bit only and has been for a while. However, you can check your CPU's abilities with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -class processor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That will give you a bunch of information about your CPU. You can look specifically for:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;width: 64 bits&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23800" LastActivityDate="2021-02-06T22:33:41.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26481" PostTypeId="1" CreationDate="2021-02-06T23:59:50.483" Score="1" ViewCount="144" Body="&lt;p&gt;When I try to download an attachment using the Protonmail webui, I am met with the following:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/so03j.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/so03j.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks for any help.&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2021-02-15T23:21:49.757" Title="Problem downloading from Protonmail webui" Tags="|epiphany|download|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26482" PostTypeId="1" CreationDate="2021-02-07T01:04:28.317" Score="0" ViewCount="67" Body="&lt;p&gt;Only had E.OS 5.1 Hera a few days and have encountered 2 issues which I cannot resolve and can be best explained by the two uploaded screenshots. The 1st - this dialog appears whenever I open the app repository and only started to appear after I downloaded via terminal the repositories required for flatpak and sideloading. At the same time I installed FreeFileSync from the online flathub repository.The dialog mentions the possibility of manually downloaded repos as being a possible cause but would like to check with other users.&lt;a href=&quot;https://i.stack.imgur.com/GeD6K.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GeD6K.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt; The 2nd - I am endeavouring to install the repos necessary for the installation of Timeshift and have been following a procedure shown in an online tutorial. Despite having used the precise same syntax as the tutorial shows the response is as shown. I would truly appreciate any assistance that any one can offer. Many thanks - Bob Deb&lt;/p&gt;&#xA;" OwnerDisplayName="user25089" LastEditorUserId="15904" LastEditDate="2021-02-13T21:37:11.897" LastActivityDate="2024-02-29T07:06:25.827" Title="1.Error Message &quot;Failed to Fetch Updates&quot; 2. Negative Terminal Response to sudo apt-add-repository" Tags="|release-hera|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26483" PostTypeId="2" ParentId="22218" CreationDate="2021-02-07T12:11:37.640" Score="0" Body="&lt;p&gt;I've faced this issue before.&#xA;In my case, it was IPv6 that caused the problem.&#xA;Fixing this is described in &lt;a href=&quot;https://askubuntu.com/a/787491/1117671&quot;&gt;this AskUbuntu answer&lt;/a&gt;.&#xA;You can set your system to prefer IPv4 over IPv6 by uncommenting the following line in &lt;code&gt;/etc/gai.conf&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# precedence ::ffff:0:0/96 100&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-07T12:11:37.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26484" PostTypeId="2" ParentId="26482" CreationDate="2021-02-07T12:34:36.607" Score="0" Body="&lt;p&gt;Your first issue appears to be an issue connecting to the Ubuntu archives at &lt;code&gt;au.archive.ubuntu.com&lt;/code&gt;.&#xA;If that's the issue perhaps its temporary.&#xA;I can connect to the server just fine.&#xA;In case it is related to other repositories configured, can you run the following command from a terminal and show the output.&#xA;This will show your system's configured repositories.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;grep -r --include '*.list' '^deb ' /etc/apt/sources.list /etc/apt/sources.list.d/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For your second problem, the command &lt;code&gt;add-apt-repository&lt;/code&gt; is provided by the &lt;code&gt;software-properties-common&lt;/code&gt; package so you just need to install that.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-07T12:34:36.607" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26485" PostTypeId="2" ParentId="22035" CreationDate="2021-02-07T18:43:02.170" Score="0" Body="&lt;p&gt;I use GNOME Online Accounts to provide applications access to my Nextcloud instance.&#xA;I tested this with the Evolution Flatpak and it works great for automatically connecting to my Nextcloud calendars and shows events like it should.&#xA;If you want to set this up, just follow these steps.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install GNOME Online Accounts.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install gnome-online-accounts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Open the Online Accounts settings in GNOME Control Center using the following command.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;env XDG_CURRENT_DESKTOP=GNOME gnome-control-center online-accounts &amp;amp;&amp;gt;/dev/null &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Now just add your Nextcloud account using the panel that appears.&#xA;This should make your Nextcloud calendars available in Evolution.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I should note that it is likely that in elementary OS 6 this workaround won't be necessary due to better integration with the Evolution Data Server and support for Nextcloud accounts directly in elementary's Online Accounts settings.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-07T18:43:02.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26486" PostTypeId="1" CreationDate="2021-02-07T20:35:26.593" Score="1" ViewCount="84" Body="&lt;p&gt;I have 4 drives in my current system. Elementary defaults to files being placed on the 1st drive in the system and sets up default folders for users. I however, want to store my files on a large (1 TByte) spinning drive and temporary files on an SSD for rapid read and write. My system drive is an NVME.&lt;/p&gt;&#xA;&lt;p&gt;Now my issue. I've tried various times to RENAME the drives, but they still show up as a long alpha-numeric name that makes sense to Elementary, but I'm not sure how to get the name to show up correctly in the File Manager.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/OFEeX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OFEeX.png&quot; alt=&quot;File_Manager&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Note that in the File Paths section the name is listed correctly, but not on the Left Sidebar.&lt;/p&gt;&#xA;" OwnerUserId="25095" LastActivityDate="2021-02-09T15:47:20.993" Title="Drive Names in the Files Manager" Tags="|pantheon-files|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26487" PostTypeId="1" CreationDate="2021-02-07T21:48:19.157" Score="2" ViewCount="203" Body="&lt;p&gt;After I have installed Geary mail client from the Flathub repository, the icons are bad rendered, with vertical separators bethween. Any solution ? The version is 3.38 I think.&lt;/p&gt;&#xA;&lt;p&gt;Best regards.&lt;/p&gt;&#xA;" OwnerUserId="25096" LastEditorUserId="20782" LastEditDate="2021-03-07T19:59:08.323" LastActivityDate="2021-03-07T19:59:08.323" Title="Geary: mail - Broken Theme and icons" Tags="|themes|pantheon-mail|icons|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26488" PostTypeId="2" ParentId="26486" CreationDate="2021-02-07T21:56:47.260" Score="2" Body="&lt;p&gt;It appears Files is showing the partition unique GUID.&#xA;If you label the volume you're mounting, Files should show that instead.&#xA;The method to do this varies depending on the filesystem of the volume.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://gparted.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;GParted&lt;/a&gt; and &lt;a href=&quot;https://wiki.gnome.org/Apps/Disks&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME Disks&lt;/a&gt; offer great graphical interfaces for changing labels.&#xA;Both applications are available in AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;Labels can also be changed via the command-line as outlined below.&lt;/p&gt;&#xA;&lt;p&gt;For ext2/ext3/ext4 filesystems use the &lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man8/e2label.8.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;e2label&lt;/code&gt;&lt;/a&gt; command to label the partition.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;e2label /dev/XXX &amp;quot;new label&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For btrfs use the &lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/en/man8/btrfs-filesystem.8.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;btrfs filesystem&lt;/code&gt;&lt;/a&gt; subcommand.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;btrfs filesystem label /dev/XXX &amp;quot;new label&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The Arch Wiki details the specific command for many more filesystems &lt;a href=&quot;https://wiki.archlinux.org/index.php/persistent_block_device_naming#by-label&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-09T15:47:20.993" LastActivityDate="2021-02-09T15:47:20.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26489" PostTypeId="2" ParentId="26487" CreationDate="2021-02-08T14:43:38.537" Score="2" Body="&lt;p&gt;You're right, it does look pretty bad.&#xA;This appears to be some quirk when using the elementary icon theme with Geary.&#xA;It's possible to set the &lt;code&gt;GTK_THEME&lt;/code&gt; to the &lt;em&gt;Adwaita&lt;/em&gt; icon theme which looks much better.&#xA;You can set the theme when running Geary with the following Flatpak command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak run --env=GTK_THEME=Adwaita org.gnome.Geary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To avoid the hassle of opening Geary from the command-line you can make this setting the default behavior by &lt;em&gt;overriding&lt;/em&gt; it.&lt;/p&gt;&#xA;&lt;p&gt;Use the following command to override this behavior for the Geary Flatpak installed in &lt;em&gt;per-user&lt;/em&gt; mode.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak override --user --env=GTK_THEME=Adwaita org.gnome.Geary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To override this setting for a &lt;em&gt;system-wide&lt;/em&gt; installation of the Geary Flatpak, use this command.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak override --system --env=GTK_THEME=Adwaita org.gnome.Geary&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-08T14:53:01.123" LastActivityDate="2021-02-08T14:53:01.123" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26491" PostTypeId="2" ParentId="26486" CreationDate="2021-02-08T21:38:15.997" Score="0" Body="&lt;p&gt;Thanks for the heads up on the e2label command. I'm fairly new to Linux and the terminal (which is why I chose Elementary over other distributions).&#xA;I ran the e2label command on the drives discovered with a df command and got the following:&lt;/p&gt;&#xA;&lt;p&gt;kurt@kurt-Z490-VISION-D:/$ sudo e2label /dev/sda1&#xA;Cache&lt;/p&gt;&#xA;&lt;p&gt;kurt@kurt-Z490-VISION-D:/$ sudo e2label /dev/sdb1&#xA;Storage&lt;/p&gt;&#xA;&lt;p&gt;kurt@kurt-Z490-VISION-D:/$ sudo e2label /dev/nvme0n1p2&lt;/p&gt;&#xA;&lt;p&gt;So they are apparently named correctly. I used the GParted Partion Editor from the AppCenter to rename them. I will repost this issue as a bug.&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="25095" LastActivityDate="2021-02-08T21:38:15.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26493" PostTypeId="1" CreationDate="2021-02-08T22:48:56.737" Score="1" ViewCount="213" Body="&lt;p&gt;Installed 5.1.7 Hera on my laptop (Lenovo Yoga 6 13ARE05); everything &lt;em&gt;except&lt;/em&gt; brightness control seems to be working great. Brightness keyboard controls and System Settings -&amp;gt; Power -&amp;gt; Display Brightness slider are syncing/working, but do not affect the screen brightness. Any help greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="25107" LastEditorUserId="15904" LastEditDate="2021-02-21T23:04:23.890" LastActivityDate="2024-03-08T08:03:30.293" Title="Brightness adjustment broken - Lenovo Yoga 6 13ARE05" Tags="|release-hera|keyboard|power|lenovo|brightness|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26494" PostTypeId="1" CreationDate="2021-02-09T10:14:55.090" Score="0" ViewCount="259" Body="&lt;p&gt;I’m new to elementary OS. I downloaded &lt;em&gt;Kdenlive&lt;/em&gt; and some other AppImage program like &lt;em&gt;Balena Etcher&lt;/em&gt;, but elementary OS says that it does not support this type of file. Is there any way to run it?&lt;/p&gt;&#xA;" OwnerUserId="25111" LastEditorUserId="20782" LastEditDate="2021-06-09T20:22:50.643" LastActivityDate="2021-06-09T20:22:50.643" Title="Trouble running Applmage" Tags="|software-installation|appimage|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26495" PostTypeId="2" ParentId="24511" CreationDate="2021-02-09T10:56:36.990" Score="0" Body="&lt;p&gt;According to Storm Elemntary-tweaks did not work for me but &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pantheon&lt;/a&gt; did.&lt;/p&gt;&#xA;" OwnerUserId="25112" LastActivityDate="2021-02-09T10:56:36.990" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26496" PostTypeId="2" ParentId="26312" CreationDate="2021-02-09T11:43:37.173" Score="0" Body="&lt;p&gt;I have installed with no problems ElementaryOS on a MacBook Pro 15&amp;quot; Retina from 2012. I have also a white MacBook from 2009 ? (not sure). My problem whit this machine is that is NOT ABLE to boot Legacy OSes from USB :-( I&lt;/p&gt;&#xA;&lt;p&gt;I am blocked in this point. Have you maked anything to start from usb on yours ?&lt;/p&gt;&#xA;&lt;p&gt;Best regards,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Joan&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25096" LastActivityDate="2021-02-09T11:43:37.173" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26497" PostTypeId="2" ParentId="26494" CreationDate="2021-02-09T13:44:23.813" Score="2" Body="&lt;h2&gt;A Note on Flatpaks&lt;/h2&gt;&#xA;&lt;p&gt;elementary OS doesn't have out-of-the-box support for AppImages but prefers Flatpaks.&#xA;There is a &lt;a href=&quot;https://flathub.org/apps/details/org.kde.kdenlive&quot; rel=&quot;nofollow noreferrer&quot;&gt;Kdenlive Flatpak&lt;/a&gt; available if you're interested.&#xA;Unfortunately, not all apps are available as Flatpaks, such as Balena Etcher which you mention.&lt;/p&gt;&#xA;&lt;h2&gt;Running an AppImage&lt;/h2&gt;&#xA;&lt;p&gt;To run AppImages, you just need to set the file as executable.&#xA;Then you will be able to run the AppImage by double clicking it in Files.&#xA;I've outlined how to do this here.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Right click the AppImage file in Files.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Select &lt;em&gt;Properties&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the &lt;em&gt;Permissions&lt;/em&gt; tab.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;For the &lt;em&gt;Owner:&lt;/em&gt; row, click the &lt;em&gt;Execute&lt;/em&gt; button to give the file execute permissions.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kz2Hm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kz2Hm.png&quot; alt=&quot;Set Execute Permissions&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Hit the &lt;em&gt;Close&lt;/em&gt; button.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now double click the AppImage to run it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;Desktop Integration&lt;/h2&gt;&#xA;&lt;p&gt;I've found it much more helpful to use &lt;a href=&quot;https://assassinate-you.net/tags/appimagelauncher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppImageLauncher&lt;/a&gt; as this makes the application available through the application launcher.&#xA;It stores AppImages in the &lt;code&gt;~/Applications&lt;/code&gt; directory by default.&#xA;To use AppImageLauncher, follow these instructions.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal to run the following commands.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Download the latest release of AppImageLauncher for Ubuntu 18.04.&#xA;I'm assuming you are on elementary OS 5 / 5.1.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -q -nv -O - https://api.github.com/repos/TheAssassin/AppImageLauncher/releases/latest \&#xA;  | awk -F': ' '/browser_download_url/ &amp;amp;&amp;amp; /bionic_amd64\.deb/ \&#xA;  {gsub(/&amp;quot;/, &amp;quot;&amp;quot;, $(NF)); system(&amp;quot;wget -qLP ~/Downloads/ &amp;quot; $(NF))}'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Install the AppImageLauncher deb package.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install ~/Downloads/appimagelauncher_*.bionic_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Remove the AppImageLauncher deb file since it's no longer needed.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;rm ~/Downloads/appimagelauncher_*.bionic_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Double click your AppImage file.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In the prompt that appears click &lt;em&gt;Integrate and run&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dDTKl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dDTKl.png&quot; alt=&quot;Integrate AppImage&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;7&quot;&gt;&#xA;&lt;li&gt;Now you can launch the application directly from the applications menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-09T13:49:47.943" LastActivityDate="2021-02-09T13:49:47.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26498" PostTypeId="2" ParentId="26493" CreationDate="2021-02-09T14:12:06.697" Score="0" Body="&lt;p&gt;I recommend experimenting with some of the kernel command-line options mentioned in &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/Debugging/Backlight&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu's Backlight Debugging Wiki&lt;/a&gt; and the ones listed in the Arch Linux Wiki's &lt;a href=&quot;https://wiki.archlinux.org/index.php/Backlight#Kernel_command-line_options&quot; rel=&quot;nofollow noreferrer&quot;&gt;Backlight page&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If you still can't get the backlight to work, I recommend sending a bug report to Ubuntu's kernel team as outlined in &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/Debugging/Backlight&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu's Backlight Debugging Wiki&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;You can also try &lt;a href=&quot;https://wiki.archlinux.org/index.php/Backlight#Xorg:_adjust_perceived_brightness_with_xrandr&quot; rel=&quot;nofollow noreferrer&quot;&gt;color correction with xrandr&lt;/a&gt;, but this is more of a hack that simulates brightness adjustment without actually controlling the backlight.&#xA;This won't save power or accurately preserve colors.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-09T14:12:06.697" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26500" PostTypeId="2" ParentId="17636" CreationDate="2021-02-09T16:00:10.740" Score="0" Body="&lt;p&gt;Try installing gstreamer1.0-plugins-bad as this worked for me.&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2021-02-09T16:00:10.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26501" PostTypeId="2" ParentId="22493" CreationDate="2021-02-09T18:27:04.980" Score="1" Body="&lt;p&gt;I solved this problem by installing &lt;a href=&quot;https://github.com/donadigo/wingpanel-indicator-namarupa&quot; rel=&quot;nofollow noreferrer&quot;&gt;Namarupa&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0UdHP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0UdHP.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Hat tip to Anderson Laverde from the ElementaryOS Slack Channel&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2021-02-09T18:27:04.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26502" PostTypeId="2" ParentId="26241" CreationDate="2021-02-09T20:42:43.127" Score="1" Body="&lt;p&gt;Try to add &amp;quot;noefi&amp;quot; after &amp;quot;splash&amp;quot; at the end of the line. And you need to use a pc keyboard to press f10 otherwise it wont work. God luck.&lt;/p&gt;&#xA;" OwnerUserId="25117" LastActivityDate="2021-02-09T20:42:43.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26503" PostTypeId="1" CreationDate="2021-02-09T21:02:29.750" Score="2" ViewCount="119" Body="&lt;p&gt;Is it possible to get a VM with elementaryOS 6.0 running on a ARM based machine? There is a Early Access build for ARM based computers, like the pinebook pro, but it is delivered as an .img. I was not able to create a VM out of it. Any ideas? Or does anyone know if there will be a .iso for the ARM version?&lt;/p&gt;&#xA;" OwnerUserId="25118" LastEditorUserId="20782" LastEditDate="2021-06-09T20:16:32.637" LastActivityDate="2021-06-09T20:16:32.637" Title="How to install the Early Access Build ARM img in a VM on ARM based machine?" Tags="|macbook|virtualization|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26504" PostTypeId="2" ParentId="26241" CreationDate="2021-02-09T22:13:14.670" Score="0" Body="&lt;p&gt;The MacPro1,1 uses a 32-bit EFI which appears to be where the problems come in.&#xA;A great resource is &lt;a href=&quot;https://mattgadient.com/linux-dvd-images-and-how-to-for-32-bit-efi-macs-late-2006-models/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this post&lt;/a&gt; on mattgradient.com.&#xA;If you're able to burn a DVD there is a prebuilt elementary OS 5.1 Hera image available.&#xA;I can't attest to whether you should trust the ISO images from the site or not, but instructions for modding existing ISO's yourself are provided.&lt;/p&gt;&#xA;&lt;p&gt;You might also find &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple/MacPro/1-1&quot; rel=&quot;nofollow noreferrer&quot;&gt;this Debian Wiki page&lt;/a&gt; for installing on the MacPro1,1 useful though it is a bit sparse.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-09T22:13:14.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26506" PostTypeId="1" CreationDate="2021-02-10T10:30:06.650" Score="0" ViewCount="622" Body="&lt;p&gt;I dual booted my laptop to have windows 10 and elementaryos 5.1 hera. I was updating some apps from appcenter and cancelled 2 updates (i assume this is what caused the problem). I now cant login no matter what I do and i've checked all the posts here about it and it doesn't fix anything. I have a lot of files on it so I would like to keep them is there any solution to this problem? I really like this OS and i would try anything to get it working again.&lt;/p&gt;&#xA;" OwnerUserId="25121" LastEditorUserId="20782" LastEditDate="2021-02-10T23:11:48.900" LastActivityDate="2024-02-26T18:04:00.600" Title="unable to login starting session failed returned error code 1" Tags="|release-hera|greeter|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26507" PostTypeId="2" ParentId="26506" CreationDate="2021-02-10T12:17:51.147" Score="0" Body="&lt;p&gt;This looks like greeter is having trouble but that means your computer is booting properly.&#xA;Can you login using a different TTY?&#xA;Press &lt;em&gt;Ctrl+Alt+F1&lt;/em&gt; or possibly &lt;em&gt;Ctrl+FN+F1&lt;/em&gt; on a Macbook to access a different TTY.&#xA;You can finish your update from the command-line with &lt;code&gt;sudo apt upgrade&lt;/code&gt;.&#xA;To reboot after finishing the updates you can run &lt;code&gt;systemctl reboot&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If you still have issues it appears that many people have solved this by changing the ownership of the &lt;code&gt;~/.Xauthority&lt;/code&gt; file to the appropriate user.&#xA;You might have already tried this but I'll include in just in case.&#xA;You can reference the solution &lt;a href=&quot;https://elementaryos.stackexchange.com/a/2462/20782&quot;&gt;here&lt;/a&gt; and I've included it below.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Login to your user account through a different TTY by pressing &lt;em&gt;Ctrl+Alt+F1&lt;/em&gt; or possibly &lt;em&gt;Ctrl+FN+F1&lt;/em&gt; on a Macbook.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set the permissions on the &lt;code&gt;~/.Xauthority&lt;/code&gt; file so that you own the file.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown $USER:$USER ~/.Xauthority&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Reboot.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemctl reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-10T12:17:51.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26508" PostTypeId="1" CreationDate="2021-02-10T13:59:21.923" Score="0" ViewCount="40" Body="&lt;p&gt;I encountered recently &lt;code&gt;\dev\mapper\elementary--vg--root&lt;/code&gt; error because I encountered BSOD in my host machine. I fixed the issue through &lt;code&gt;fsck /f&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;When I boot up again my VM, the startup wizard where this displays after the installation, popups again. I tried to turn off some settings through the wizard and also through system settings but the setting always reverted.&lt;/p&gt;&#xA;&lt;p&gt;I added a gif image showing the issue.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/z5rg1.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/z5rg1.gif&quot; alt=&quot;switch-settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25122" LastActivityDate="2024-02-27T00:06:15.733" Title="Cannot toggle checkboxes and switch control in system settings" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26509" PostTypeId="2" ParentId="26473" CreationDate="2021-02-10T14:05:02.783" Score="0" Body="&lt;p&gt;If elementary OS supported app menus, they would document it in their &lt;a href=&quot;https://elementary.io/docs/human-interface-guidelines&quot; rel=&quot;nofollow noreferrer&quot;&gt;Human Interface Guidelines&lt;/a&gt;.&#xA;App menus are not mentioned specifically but there is documentation on creating toolbars in individual applications.&#xA;I infer from the guidelines that elementary OS is focused on other ways of providing consistency which are more intuitive for users than App Menus.&#xA;In GNOME there was inconsistency in how apps handled App Menus, which lead to their removal as mentioned in Allan Day's blog post &lt;a href=&quot;https://blogs.gnome.org/aday/2018/10/09/farewell-application-menus/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Farewell, application menus!&lt;/a&gt;&#xA;Given that, I doubt that App Menus will ever happen but keep an eye on the Human Interface Guidelines in case I'm wrong.&#xA;If you would like App Menus in elementary OS, the best way to give such feedback directly to the developers is through &lt;em&gt;About -&amp;gt; Report Problems&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-10T14:05:02.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26510" PostTypeId="1" CreationDate="2021-02-10T15:48:06.547" Score="0" ViewCount="32" Body="&lt;p&gt;I have a late 2009 Mac Book Pro that cannot perform a macOS re-install.&lt;/p&gt;&#xA;&lt;p&gt;Can I create a USB install image on a Windows 10 PC that will then boot and install elementary OS on the MacBook Pro?&lt;/p&gt;&#xA;" OwnerUserId="25126" LastEditorUserId="20782" LastEditDate="2021-06-09T20:17:51.563" LastActivityDate="2021-06-09T20:17:51.563" Title="Can I create a MacBook install image on a Windows 10 PC?" Tags="|system-installation|macbook|microsoft-windows|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26512" PostTypeId="2" ParentId="26508" CreationDate="2021-02-10T17:48:49.123" Score="0" Body="&lt;p&gt;Did you boot in recovery mode?&#xA;It looks like your root volume was likely mounted &lt;em&gt;read-only&lt;/em&gt;.&#xA;Can you remount it read/write with the following command?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -o remount,rw /&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For the error &lt;code&gt;IO charset iso8859-1 not found&lt;/code&gt;, try booting into recovery mode and running &lt;code&gt;depmod&lt;/code&gt; as &lt;a href=&quot;https://askubuntu.com/a/1186125/1117671&quot;&gt;this AskUbuntu answer&lt;/a&gt; mentions.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-11T14:37:23.963" LastActivityDate="2021-02-11T14:37:23.963" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26513" PostTypeId="2" ParentId="26510" CreationDate="2021-02-10T18:23:56.283" Score="2" Body="&lt;p&gt;Yes.&#xA;The elementary OS installation instructions are available &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;I recommend using &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Balena Etcher&lt;/a&gt; to flash the ISO on to the USB.&lt;/p&gt;&#xA;&lt;p&gt;When you go to boot from the USB, you'll need to press and hold the left &lt;em&gt;Option&lt;/em&gt; key after the startup chime.&#xA;A menu will appear with attached disks to boot from.&#xA;Select the USB drive to boot the elementary OS installer.&lt;/p&gt;&#xA;&lt;p&gt;The Debian Wiki has helpful information for installing on Apple devices &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, including several models of 2009 Macbook Pros.&#xA;Macbook Pro models from 2009 have model numbers under &lt;em&gt;MacbookPro5,x&lt;/em&gt;.&#xA;You can also refer to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16247/no-wifi-macbook-pro-after-elementaryos-install&quot;&gt;this question&lt;/a&gt; about fixing WiFi after installing on a MacbookPro5,5.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-11T12:31:01.703" LastActivityDate="2021-02-11T12:31:01.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26514" PostTypeId="2" ParentId="25954" CreationDate="2021-02-10T18:38:28.273" Score="0" Body="&lt;p&gt;Claro que lo graba, sólo hay que escoger la fuente de sonido adecuada. Busca un tutorial en youtube de simplescreenrecorder de yoyo fernandez. Ahí lo tienes todo explicado.&lt;/p&gt;&#xA;" OwnerUserId="25096" LastActivityDate="2021-02-10T18:38:28.273" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26515" PostTypeId="1" AcceptedAnswerId="26516" CreationDate="2021-02-10T20:30:17.177" Score="0" ViewCount="108" Body="&lt;p&gt;I have a system76 Lemur pro and really hoping to move to elementary os, especially as Odin comes out on the stable branch. There is one hiccup. Sound behaves as expected through Bluetooth headphones, HDMI, and computer speakers. As soon as I plug in headphones sound is tinny and distorted. It is unusable for me.&lt;/p&gt;&#xA;&lt;p&gt;Some things I've tried:&lt;/p&gt;&#xA;&lt;p&gt;-I've installed pulse effects and pulseaudio switched back and forth on the audio streams&lt;/p&gt;&#xA;&lt;p&gt;-I checked Alsamixer to see if something changes when headphones are plugged in. Played around with various sound levels&lt;/p&gt;&#xA;&lt;p&gt;-Messed around with overamplification&lt;/p&gt;&#xA;&lt;p&gt;-Unplugged / replugged&lt;/p&gt;&#xA;&lt;p&gt;I can confirm this is repeatable. I've reinstalled elementary, getting the same result. I've tried the Odin daily build getting the same result. No other os I have tried behaves this way.&lt;/p&gt;&#xA;&lt;p&gt;Let me know if you have any thoughts!&lt;/p&gt;&#xA;" OwnerUserId="25131" LastEditorUserId="20782" LastEditDate="2021-04-29T12:14:33.673" LastActivityDate="2021-04-29T12:14:33.673" Title="Sound through headphone jack is tinny and distorted" Tags="|sound|audio|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26516" PostTypeId="2" ParentId="26515" CreationDate="2021-02-10T22:17:44.327" Score="0" Body="&lt;p&gt;The Arch Linux Wiki mentions this issue on the &lt;a href=&quot;https://wiki.archlinux.org/index.php/System76_Lemur_Pro&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lemur Pro page&lt;/a&gt;.&#xA;Try creating the file &lt;code&gt;/etc/modprobe.d/headset.conf&lt;/code&gt; with the line &lt;code&gt;options snd_hda_intel model=headset-mode-no-hp-mic&lt;/code&gt;.&#xA;Then reboot the system.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-10T22:17:44.327" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26517" PostTypeId="1" CreationDate="2021-02-11T00:52:08.050" Score="0" ViewCount="138" Body="&lt;p&gt;Is it possible to apply for access to the Public Beta of V6 when it becomes available?&#xA;I run elementary OS on a VM Ware virtual machine on my iMac with great joy.&lt;/p&gt;&#xA;" OwnerUserId="14348" LastActivityDate="2021-02-11T12:43:52.680" Title="Public Beta Availability" Tags="|release-juno|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26518" PostTypeId="2" ParentId="26517" CreationDate="2021-02-11T02:02:01.773" Score="1" Body="&lt;p&gt;You can run elementary OS 6 by &lt;a href=&quot;https://builds.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;joining the Early Access program&lt;/a&gt; and downloading a daily snapshot. One way to join is by becoming a &lt;a href=&quot;https://github.com/sponsors/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub sponsor&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="24889" LastActivityDate="2021-02-11T02:02:01.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26520" PostTypeId="1" AcceptedAnswerId="26523" CreationDate="2021-02-11T12:29:23.370" Score="0" ViewCount="62" Body="&lt;p&gt;Yesterday I was trying elementaryOS with a liveusb and I noticed monitor 1's space was taking a thin string of space of monitor 2, I tried fiddling with the display settings and resolutions but didn't found a fix&lt;/p&gt;&#xA;" OwnerUserId="25135" LastEditorUserId="20782" LastEditDate="2021-02-15T18:35:14.583" LastActivityDate="2021-02-15T18:35:14.583" Title="Monitor 1 leaking into Monitor 2? Dual Monitor Setup" Tags="|display|xorg|monitors|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26521" PostTypeId="2" ParentId="26517" CreationDate="2021-02-11T12:43:52.680" Score="1" Body="&lt;p&gt;I don't believe there is an application process.&#xA;Anyone who wants to should be able to access the beta when it is released, if my understanding is correct.&lt;/p&gt;&#xA;&lt;p&gt;As &lt;em&gt;pion&lt;/em&gt; answered, you can easily get access to elementary OS 6 right now through the Early Access Program by becoming a GitHub sponsor of the project.&#xA;You are also welcome to otherwise build your own elementary OS 6 images or configure an Ubuntu 20.04 system with elementary's PPA's and the necessary packages.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-11T12:43:52.680" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26522" PostTypeId="1" CreationDate="2021-02-11T13:23:22.743" Score="0" ViewCount="1231" Body="&lt;p&gt;When elementaryOS 6 is released, in order to update, do I need to do a full &amp;quot;fresh install&amp;quot; or will I be able to update from Appcenter (or from somewhere else)?&lt;/p&gt;&#xA;" OwnerUserId="25137" LastEditorUserId="14940" LastEditDate="2021-06-07T04:02:38.837" LastActivityDate="2024-02-26T08:05:35.687" Title="When elementaryOS 6 is launched, how to update from 5.1 to 6?" Tags="|updates|system|release-odin|" AnswerCount="5" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26523" PostTypeId="2" ParentId="26520" CreationDate="2021-02-11T14:05:21.377" Score="1" Body="&lt;p&gt;You totally ruined my dual monitor setup for me because I immediately noticed the same issue after reading your question.&#xA;In my setup, this might be related to the proprietary NVidia drivers and the different resolutions of the monitors.&#xA;I found the easiest way to fix this is by using &lt;a href=&quot;https://christian.amsuess.com/tools/arandr/&quot; rel=&quot;nofollow noreferrer&quot;&gt;ARandR&lt;/a&gt;.&#xA;The best tool to apply this configuration whenever connected to the external monitor is &lt;a href=&quot;https://github.com/phillipberndt/autorandr&quot; rel=&quot;nofollow noreferrer&quot;&gt;autorandr&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install ARandR and autorandr with the following command in Terminal.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install arandr autorandr&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Open ARandR from the Applications Menu.&#xA;ARandR will show your current monitor configuration.&#xA;My default, dual-monitor configuration is shown below.&#xA;My primary monitor is the external one, &lt;em&gt;HDMI-0&lt;/em&gt;, which is positioned to the left of my secondary monitor, &lt;em&gt;LVDS-0&lt;/em&gt;.&#xA;The slight overlap appears on the left edge of my secondary monitor, &lt;em&gt;LVDS-0&lt;/em&gt;, though this overlap is not reflected in ARandR.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pL6ks.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pL6ks.png&quot; alt=&quot;Default Dual Monitor Configuration in ARandR&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Tip: You can increase or decrease the layout's size from the &lt;em&gt;View&lt;/em&gt; menu.&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Click and drag your secondary monitor a smidge away from your primary monitor. In my case, I clicked and dragged my secondary monitor, &lt;em&gt;LVDS-0&lt;/em&gt;, and moved it slightly to the right like so.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZGeD0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZGeD0.png&quot; alt=&quot;Corrected Dual Monitor Configuration in ARandR&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Click the green check mark to apply your settings.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KHnAV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KHnAV.png&quot; alt=&quot;Clicking the Green Checkmark in arandr&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This removed the overlap in my dual monitor setup.&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Now, you'll probably want to have this overlap fixed whenever you connect to this external monitor.&#xA;This is where autorandr comes in.&#xA;From the Terminal, save the current autorandr configuration with a descriptive name.&#xA;Here I save my current configuration with the generic name &lt;em&gt;external&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;autorandr --save external&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now the overlap should be fixed whenever my laptop is plugged in to my external monitor, at least for my user account.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-11T14:05:21.377" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26524" PostTypeId="2" ParentId="24571" CreationDate="2021-02-11T14:14:31.733" Score="0" Body="&lt;p&gt;I've experienced a lot of system-wide crashes using Epiphany with the Nouveau drivers.&#xA;The proprietary Nvidia drivers work much better, but on older Macbooks such as yours you will likely need to be booting in legacy BIOS compatibility mode for the graphics drivers to work correctly.&#xA;See my answer regarding a 2010 Macbook &lt;a href=&quot;https://elementaryos.stackexchange.com/a/26397/20782&quot;&gt;here&lt;/a&gt; for more details.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-11T14:14:31.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26525" PostTypeId="1" CreationDate="2021-02-11T18:11:37.823" Score="0" ViewCount="199" Body="&lt;p&gt;I have come to Elementary OS after a lot of tests and finally, I have it! 'cause it's Fast &amp;amp; Simple.&lt;/p&gt;&#xA;&lt;p&gt;But the main problem for me is the touchpad I do not know what the problem is, just my touchpad does not work even I turn it On/Off with &lt;kbd&gt;F6&lt;/kbd&gt; button that is especially for this purpose in &lt;code&gt;Lenovo b50-80&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Consider that after suspend, &lt;strong&gt;it will be active automatically&lt;/strong&gt; now I can turn it off with &lt;kbd&gt;F6&lt;/kbd&gt; and after that, I cannot turn it on again.&lt;/p&gt;&#xA;&lt;p&gt;So I searched for this and did something however has no effect and the touchpad still does not work, does anybody have the same situation as me? What is the key to this problem?&lt;/p&gt;&#xA;" OwnerUserId="25112" LastActivityDate="2021-03-13T21:01:25.157" Title="Lenovo touchpad does not work" Tags="|touchpad|hardware|lenovo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26526" PostTypeId="1" CreationDate="2021-02-11T19:58:55.730" Score="0" ViewCount="429" Body="&lt;p&gt;I would like to know how to get the complete source code of ElementaryOS and how to compile it (on windows, if possible).&lt;/p&gt;&#xA;&lt;p&gt;I wanted to make it clear that I am new to stackexchange and that I am not familiar with the forum.&lt;/p&gt;&#xA;&lt;p&gt;Thank you for reading and answering!&lt;/p&gt;&#xA;" OwnerUserId="25141" LastActivityDate="2024-02-28T03:01:10.140" Title="How to get ElementaryOS's Source Code and how to compile it?" Tags="|code|sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26527" PostTypeId="2" ParentId="26525" CreationDate="2021-02-11T20:38:22.800" Score="1" Body="&lt;p&gt;The ArchWiki page for Lenovo Laptops has &lt;a href=&quot;https://wiki.archlinux.org/index.php/Laptop/Lenovo#Lenovo_B50-70&quot; rel=&quot;nofollow noreferrer&quot;&gt;a section on the B50-70&lt;/a&gt; which mentions that the touchpad works after installing the Synaptics drivers.&#xA;This might work for your model.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Assuming your on elementary OS 5.1 Hera, install the Synaptics drivers with the following command.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install xserver-xorg-input-synaptics-hwe-18.04&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Create the directory &lt;code&gt;/etc/X11/xorg.conf.d&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /etc/X11/xorg.conf.d/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Then, prefer the Synaptics drivers over the default libinput drivers by copying the X configuration file to the directory &lt;code&gt;/etc/X11/xorg.conf.d/&lt;/code&gt; where it has higher precedence.&#xA;This is mentioned in the Debian Wiki &lt;a href=&quot;https://wiki.debian.org/SynapticsTouchpad#Change_to_libinput_Xorg_driver_in_Debian_9_.22Stretch.22&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /usr/share/X11/xorg.conf.d/50-synaptics.conf /etc/X11/xorg.conf.d/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-11T20:52:27.303" LastActivityDate="2021-02-11T20:52:27.303" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26532" PostTypeId="1" CreationDate="2021-02-12T12:42:35.447" Score="0" ViewCount="104" Body="&lt;p&gt;I want to try out elementaryOS on my new laptop. But it is very new, and I don't think the kernel included in Ubuntu 18.04 (v5.3) supports its processor (Intel Core i3-1005G1). Is it true? Does elementaryOS v5.1 support the Ice Lake Processors of Intel?&lt;/p&gt;&#xA;" OwnerUserId="25145" LastEditorUserId="20782" LastEditDate="2021-02-16T13:50:24.687" LastActivityDate="2021-07-16T15:02:05.213" Title="Is elementaryOS 5.1 &quot;Hera&quot; supported on Intel 10th Gen Mobile Processors?" Tags="|release-hera|kernel|laptop|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26533" PostTypeId="2" ParentId="26532" CreationDate="2021-02-12T12:59:29.393" Score="1" Body="&lt;p&gt;Ubuntu backports newer Linux kernels through its &lt;a href=&quot;https://wiki.ubuntu.com/Kernel/LTSEnablementStack&quot; rel=&quot;nofollow noreferrer&quot;&gt;hardware-enablement stack&lt;/a&gt;.&#xA;This means that older releases of Ubuntu, and elementary OS by extension, can run on newer hardware.&lt;/p&gt;&#xA;&lt;p&gt;That said, a &lt;a href=&quot;https://linux-hardware.org/?id=cpu:intel-6-126-5-core-i3-1005g1&quot; rel=&quot;nofollow noreferrer&quot;&gt;query&lt;/a&gt; for your CPU on &lt;a href=&quot;https://linux-hardware.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;linux-hardware.com&lt;/a&gt; shows that plenty of Linux distributions have been running on it successfully and there is even an Ubuntu 18.04 in the list, on which the latest release of elementary OS is based.&#xA;In other words, it should definitely work.&lt;/p&gt;&#xA;&lt;p&gt;Booting the elementary OS installer on the system via USB is also a good test.&#xA;If it can boot and appears to work well, that typically means things will work barring the troubles stemming from third-party drivers and buggy firmware and all that.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-12T12:59:29.393" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26535" PostTypeId="1" AcceptedAnswerId="26537" CreationDate="2021-02-12T13:02:16.317" Score="1" ViewCount="53" Body="&lt;p&gt;A while ago I was working with a remote environment and I decided to bookmark it in &lt;strong&gt;Pantheon-Files app.&lt;/strong&gt; &lt;strong&gt;I inserted my username and password and I marked the &amp;quot;Keep it forever&amp;quot; box&lt;/strong&gt; so I don't have to introduce it again.&lt;/p&gt;&#xA;&lt;p&gt;The problem: &lt;strong&gt;I have forgotten the password&lt;/strong&gt; and I need it so badly now.&lt;/p&gt;&#xA;&lt;p&gt;Is there anyway to discover what was my password? Since the sftp connection works &lt;strong&gt;I guess it must be stored somewhere.&lt;/strong&gt; But where?&lt;/p&gt;&#xA;" OwnerUserId="25146" LastEditorUserId="20782" LastEditDate="2021-02-13T15:25:40.060" LastActivityDate="2021-02-13T15:25:40.060" Title="How can I recover a password from a sftp bookmark in pantheon-files?" Tags="|pantheon-files|security|ssh|keyring|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26537" PostTypeId="2" ParentId="26535" CreationDate="2021-02-12T13:58:02.150" Score="1" Body="&lt;p&gt;The password is stored in your login keyring.&#xA;The easiest way to find it is with &lt;a href=&quot;https://wiki.gnome.org/Apps/Seahorse&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME Seahorse&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install Seahorse from AppCenter.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7GhHq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7GhHq.png&quot; alt=&quot;Seahorse in AppCenter&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Open the application from AppCenter or open the &lt;em&gt;Passwords and Keys&lt;/em&gt; application from the &lt;em&gt;Applications Menu&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lu9Cf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lu9Cf.png&quot; alt=&quot;Seahorse Application Window&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the &lt;em&gt;Login&lt;/em&gt; bookmark on the left under &lt;em&gt;Passwords&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Find your login which should be marked as a &lt;em&gt;Network password&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BMwIG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BMwIG.png&quot; alt=&quot;Seahorse Login Keys List&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;Right click the entry and select properties.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/eavg6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/eavg6.png&quot; alt=&quot;Seahorse SSH Key Properties Dialog&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;6&quot;&gt;&#xA;&lt;li&gt;From the properties dialog, expand the password field.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PQm4h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PQm4h.png&quot; alt=&quot;Seahorse SSH Key Properties Dialog Expanded Password&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;7&quot;&gt;&#xA;&lt;li&gt;Check the box &lt;em&gt;Show password&lt;/em&gt; to reveal your password.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/R8oUH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R8oUH.png&quot; alt=&quot;Seahorse SSH Key Properties Dialog Show Password&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-12T14:35:30.300" LastActivityDate="2021-02-12T14:35:30.300" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26538" PostTypeId="2" ParentId="26526" CreationDate="2021-02-12T18:30:24.550" Score="0" Body="&lt;p&gt;The source code for elementary OS is available from &lt;a href=&quot;https://github.com/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;their GitHub organization&lt;/a&gt;.&#xA;The easiest way to get the code is using Git.&lt;/p&gt;&#xA;&lt;p&gt;To build the code you'd have to walk the dependencies and then build and install each one by following the build instructions in each project's README.&lt;/p&gt;&#xA;&lt;p&gt;The instructions, as would be expected, assume you are using an Ubuntu base for the operating system, where getting all the dependencies for elementary OS is done through Debian and Ubuntu packages.&#xA;Otherwise, you'd have to build each dependency from source if your system doesn't provide packages.&lt;/p&gt;&#xA;&lt;p&gt;On Windows, you're probably going to want to build this all on authentic Ubuntu to avoid hassles.&#xA;Use VirtualBox, VMWare, Multipass, Docker, WSL, or some other virtualization application to run an Ubuntu system on Windows.&#xA;MSYS2 and Cygwin are also available options.&#xA;You are probably going to have to compile a lot of dependencies from source and do lots of patching if you want to use MSVC, Microsoft's C compiler for Windows.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-12T18:30:24.550" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26539" PostTypeId="1" CreationDate="2021-02-13T10:13:23.247" Score="0" ViewCount="310" Body="&lt;p&gt;I got a new laptop . ThinkPad e14 gen 2 with AMD Ryzen 4500u.&#xA;I installed elementary os from latest iso 5.x available in the website.it updated the system and it got kernel update till 5.4 with hwe. But the graphics drivers are not there&#xA;I'm not able to reduce or increase brightness and there are graphical glitches .I tried installing a new kernel using the ubuntu mainline kernel install utility . But after update when I restart , the system is not booting up . I even tried downloading and installing kernel manually. But still it didn't work .&#xA;I would really love to use elementary os .my laptop graphics work out of the box with ubuntu 20.04.2 with 5.8 kernel . Is there any way to get the 5.8 kernel through hwe ? Or can I not run elementary os 5.x in my laptop . Do I have to wait for eos 6?&lt;/p&gt;&#xA;" OwnerUserId="25149" LastEditorUserId="14940" LastEditDate="2021-06-07T04:04:30.387" LastActivityDate="2024-02-22T14:04:05.630" Title="Elementary os in ryzen 4500u graphics issues Renoir" Tags="|release-hera|graphic-drivers|kernel|amd|thinkpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26540" PostTypeId="2" ParentId="26539" CreationDate="2021-02-13T14:59:29.370" Score="0" Body="&lt;p&gt;According to &lt;a href=&quot;https://ubuntu.com/about/release-cycle#ubuntu-kernel-release-cycle&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; it doesn't appear that the 5.8 Linux kernel will be back-ported to Ubuntu 18.04 through hwe.&#xA;That means your best bet is waiting for elementary OS 6 or virtualizing elementary OS 5.1 on something with a newer kernel, such as Ubuntu 20.04.&#xA;If you're willing to take the risk, you could also try the elementary OS 6 &lt;a href=&quot;https://builds.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Early Access Program&lt;/a&gt; or adding the elementary 6 PPA's to an Ubuntu 20.04 system yourself and installing Pantheon.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-13T14:59:29.370" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26541" PostTypeId="1" AcceptedAnswerId="26542" CreationDate="2021-02-13T15:06:15.160" Score="0" ViewCount="25" Body="&lt;p&gt;I just joined the elementaryOS forum as I am strongly considering replacing my server OS with elementary.  I have a Dell r710 (2xXeon CPU, 64GB, 4TB HDD) currently running LXLE but I need to rebuild it to add more HDD storage, and will have to install a fresh OS.  So...  I use a Mac mostly for my personal use and thus I like the UI of elementary.  I note that it is based on the same Ubuntu base (bionic beaver, 18.04 LTS), so I would think I could replace my OS without any difficulty.&lt;/p&gt;&#xA;&lt;p&gt;I run VMware Workstation Pro for work, and I recently installed Plex Media Server for personal use, and neither are listed in elementary's App Center.  Will I be able to integrate them easily or will I need to use the CLI (I'm an old CLI guy, so that isn't a deal-killer)?  Are there any known issues I should consider?  I know that I ran into a hardware compatibility issue with CentOS when I tried to install it, so I don't want to spend an entire week building up this refurbished server.&lt;/p&gt;&#xA;&lt;p&gt;Thanks, everyone.  I look forward to being a part of the community.&lt;/p&gt;&#xA;" OwnerUserId="25151" LastActivityDate="2021-02-13T18:05:46.793" Title="First Post Intro &amp; Migration Question" Tags="|software-installation|install|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26542" PostTypeId="2" ParentId="26541" CreationDate="2021-02-13T18:05:46.793" Score="0" Body="&lt;p&gt;Since LXLE and elementary OS are both based on the Ubuntu 18.04 LTS release you shouldn't have much in the way issues when it comes to compatibility.&#xA;Keep in mind that incompatibilities may arise for anything coupled to LXDE since Pantheon is the desktop environment used on elementary OS, though this may not be an issue for you given your server-oriented use case.&lt;/p&gt;&#xA;&lt;p&gt;Since elementary OS is intended for desktop use, it doesn't come with as much out-of-box support for running server-side applications such as Plex Media Server.&#xA;AppCenter is meant for discovering and installing desktop applications, third-party drivers, and managing system updates.&#xA;That said, its based on Ubuntu so you can easily add support for snaps and the &lt;a href=&quot;https://snapcraft.io/install/snap-store/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snap Store&lt;/a&gt; just like you'd find on a stock instance of Ubuntu Desktop.&#xA;In fact, installing the Plex Media Server snap is as easy as three commands according to the &lt;a href=&quot;https://snapcraft.io/install/plexmediaserver/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;Snapcraft Website's instructions&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I can't think of any known issues you'd need to be concerned with given what you've said.&#xA;If you're current system is based on Ubuntu 18.04 and is working fine then you can reasonably expect the same.&#xA;You can always test elementary OS from the installation media as a way to check.&#xA;You shouldn't need to worry about hardware compatibility issues like you had with CentOS as that would have had a different and almost certainly older kernel.&lt;/p&gt;&#xA;&lt;p&gt;Welcome to the community, by the way.&#xA;Glad to have you hear and best of luck!&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-13T18:05:46.793" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26543" PostTypeId="2" ParentId="26023" CreationDate="2021-02-13T19:54:31.167" Score="0" Body="&lt;p&gt;Please install the latest version of linux-firmware which contains it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget http://security.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.178.3_all.deb &#xA;sudo dpkg -i linux*.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;reboot&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-02-13T19:54:31.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26544" PostTypeId="2" ParentId="22575" CreationDate="2021-02-14T02:41:01.263" Score="-1" Body="&lt;p&gt;I am experiencing the same thing.  Given that this hasn't been answered in nearly a year doesn't bode well for me.  I am considering installing elementaryOS 5.1 (hera) on a Dell server-class machine, to which I will want to RDP to so I can use the desktop environment.  I installed the latest version of XRDP (v0.9.15), set the firewall to allow port 3389, added the xrdp user to the ssl-cert group, enabled xrdp, checked that it was running, and all I've gotten is the black screen.&lt;/p&gt;&#xA;&lt;p&gt;Actually, if I let the screen sit for a few minutes, I receive an error message, which when I click on it, shows me an xorg logon screen, but none of the options there does any better than the black screen.  Hmmm.&lt;/p&gt;&#xA;" OwnerUserId="25151" LastActivityDate="2021-02-14T02:41:01.263" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26545" PostTypeId="1" CreationDate="2021-02-14T16:46:22.677" Score="0" ViewCount="185" Body="&lt;p&gt;I'm considering installing eOS 5.1 (hera) on a Dell server.  I don't want to go down the path of wiping everything on my disks and then discovering that there are incompatibilities.  I already did that with CentOS and Ubuntu 20.04.  I'm currently running LXLE, which is an Ubuntu 18.04 LTS base with an xfce desktop.  So, doing my &amp;quot;due diligence&amp;quot; I have tried the following&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Running the live USB on a Macbook Air&lt;/li&gt;&#xA;&lt;li&gt;Running the live USB on my Dell server&lt;/li&gt;&#xA;&lt;li&gt;Building and running a VMware VM from the eOS .iso&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Of critical importance to me is the ability the remote in using RDP.  To that end, I have installed xrdp (v.0.9.15) on each and every one, and have yet to be able to arrive at the desktop (I am currently using xrdp for my LXLE).  So far...&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The live USB on Mac won't see my wireless card, and I can't connect to my LAN&lt;/li&gt;&#xA;&lt;li&gt;The live USB on the server sees my Enet connection, but then balks at xrdp&lt;/li&gt;&#xA;&lt;li&gt;The VM locks up on the login screen. The click updates correctly, but no mouse or keyboard input is detected.  Further, I can't send CTRL-ALT-F1 (Option key is ALT on a Mac) with any results.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;So, for all intents and purposes, I have now tried three different approaches and have missed the pitch all three times.  That's a strike out in baseball.  Am I wasting my time, and should I look for another distro to use?&lt;/p&gt;&#xA;" OwnerUserId="25151" LastActivityDate="2022-02-07T21:03:35.303" Title="Is elementary OS &quot;ready for prime time?&quot;" Tags="|release-hera|system-installation|rdp|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26546" PostTypeId="1" AcceptedAnswerId="26641" CreationDate="2021-02-14T21:29:39.000" Score="1" ViewCount="682" Body="&lt;p&gt;I configured the samba service correctly and I can see the share folder from a windows computer but when I want to share the folder downloads, documents or any other from my personal folder I can not, I deploy context menu and normally you would see in ubuntu sharing options but in elementary I do not find such an option, what package would be missing to add the function to this file manager?&#xA;Also I would like to know which is the web page of the file manager developer as it doesn't give much information in the app store, the name of the file manager is very generic.&lt;/p&gt;&#xA;" OwnerUserId="25160" LastActivityDate="2021-03-09T14:07:21.003" Title="How to add folder sharing or sharing options to the File manager context menu?" Tags="|release-hera|settings|pantheon-files|applications|networking|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26547" PostTypeId="2" ParentId="26546" CreationDate="2021-02-15T13:02:49.853" Score="0" Body="&lt;h3&gt;Sharing Options in Files&lt;/h3&gt;&#xA;&lt;p&gt;I don't believe this is possible directly from Files.&lt;/p&gt;&#xA;&lt;h3&gt;Alternatives&lt;/h3&gt;&#xA;&lt;p&gt;The configuration files for your samba server can be modified with a text editor or graphically with the &lt;a href=&quot;https://packages.ubuntu.com/bionic/system-config-samba&quot; rel=&quot;nofollow noreferrer&quot;&gt;system-config-samba&lt;/a&gt; utility or &lt;a href=&quot;https://wiki.gnome.org/Apps/Files&quot; rel=&quot;nofollow noreferrer&quot;&gt;GNOME Files&lt;/a&gt;, packaged as &lt;code&gt;nautilus&lt;/code&gt;, with the &lt;a href=&quot;https://packages.ubuntu.com/bionic/nautilus-share&quot; rel=&quot;nofollow noreferrer&quot;&gt;nautilus-share&lt;/a&gt; plugin as you mentioned.&#xA;The &lt;a href=&quot;https://help.ubuntu.com/community/Samba/SambaServerGuide&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Wiki's Samba Server Guide&lt;/a&gt; serves as a good reference for the various methods of configuring a samba server.&lt;/p&gt;&#xA;&lt;p&gt;It sounds like you're used to using GNOME Files, so I've included the command to install it with the share plugin here.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install nautilus nautilus-share&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Files Plugins&lt;/h3&gt;&#xA;&lt;p&gt;Plugins for Files can be found with the following command via apt, but this only shows a Dropbox plugin at the moment.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt search pantheon-files-plugin-&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Files Website&lt;/h3&gt;&#xA;&lt;p&gt;The File's GitHub repository can be found &lt;a href=&quot;https://github.com/elementary/files&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-15T13:45:59.440" LastActivityDate="2021-02-15T13:45:59.440" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26548" PostTypeId="1" CreationDate="2021-02-15T22:13:01.623" Score="0" ViewCount="70" Body="&lt;p&gt;I installed eOS 5.1.7 Hera a couple days ago on my 2012 Macbook Pro and I'm having a hard time with using specific apps. The one in particular is Code, a default text editing app that comes with Hera. Whenever I try to save my work, the Save Options window does not appear. Interacting with the Code window does nothing. (This is also happening in other apps like VS Code and Files, but I think the solution would fix those as well.)&lt;/p&gt;&#xA;&lt;p&gt;However, I did discover that if I press &amp;lt;Return&amp;gt; it will save the file to the default location. And if I press &amp;lt;Esc&amp;gt; it will respond again in the main window.&lt;/p&gt;&#xA;&lt;p&gt;I'm concluding that the Save options window is not appearing for some reason, but present. I only have the built-in display on my laptop, and I keep to just one desktop view.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have a solution or have encountered such a problem?&lt;/p&gt;&#xA;" OwnerDisplayName="user25162" LastActivityDate="2021-03-12T13:54:42.960" Title="Save window for Code app not displaying" Tags="|display|window-management|code|window-manager|vscode|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26549" PostTypeId="2" ParentId="26548" CreationDate="2021-02-15T23:14:11.810" Score="1" Body="&lt;p&gt;I think it saves automatically with every change:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/25471/elementary-os-code-save-behavior&quot;&gt;Elementary OS Code save behavior&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This answer says &amp;quot;Ctrl+S will allow you to save the file to a specific location if you haven't already.&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-02-15T23:14:11.810" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26550" PostTypeId="2" ParentId="26522" CreationDate="2021-02-15T23:17:14.193" Score="0" Body="&lt;p&gt;My understanding is that they devs have not indicated an auto-update feature.  A fresh install is most likely going to be the best and only method.&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-02-15T23:17:14.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26552" PostTypeId="1" CreationDate="2021-02-16T11:43:49.407" Score="0" ViewCount="29" Body="&lt;p&gt;My system settings doesnt show full to Adminstration section ; which contains of About, Time &amp;amp; Date, Parental Control and Universal Access. How to fix or revert this? Im so new to linux. help me please. &lt;a href=&quot;https://i.stack.imgur.com/KQSLQ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KQSLQ.jpg&quot; alt=&quot;As you see from the photo is attached . The Administration is barely seen under the screen. &quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25159" LastEditorUserId="20782" LastEditDate="2021-06-09T20:17:30.780" LastActivityDate="2024-02-25T03:04:25.550" Title="My system settings doesnt show full to Adminstration section" Tags="|display|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26553" PostTypeId="2" ParentId="26552" CreationDate="2021-02-16T13:12:58.430" Score="0" Body="&lt;h3&gt;Maximize the Window&lt;/h3&gt;&#xA;&lt;p&gt;In elementary OS, you can double click the title bar to toggle an application as full-screen.&#xA;Double click the title bar and it should auto-fit to your screen.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XWmnu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XWmnu.png&quot; alt=&quot;Mouse Shown in Title Bar of System Settings Page&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Increase the Display's Resolution&lt;/h3&gt;&#xA;&lt;p&gt;If this has no effect, then your screen resolution is smaller than the minimum height of the &lt;em&gt;System Settings&lt;/em&gt; window.&#xA;You might be able to fix this by increasing your screen's resolution from the &lt;em&gt;Displays&lt;/em&gt; panel in &lt;em&gt;System Settings&lt;/em&gt;, which fortunately is not cut off on your screen.&lt;/p&gt;&#xA;&lt;p&gt;The &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;Recommended System Specifications&lt;/a&gt; recommend a &lt;em&gt;1024×768&lt;/em&gt; display.&#xA;I've tested with this resolution and the &lt;em&gt;System Settings&lt;/em&gt; window fits correctly, but will be cut off on the next lower resolution for my screen, &lt;em&gt;800x600&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click &lt;em&gt;Displays&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gF9Lf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gF9Lf.png&quot; alt=&quot;Select Displays From System Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This will display a preview of the displays connected to your system.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/8U2gG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8U2gG.png&quot; alt=&quot;Displays Panel Showing Two Displays Side-by-Side&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Click the settings wheel for your display.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kkKAv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kkKAv.png&quot; alt=&quot;Display Settings Showing Current Resolution&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Select a higher resolution from the &lt;em&gt;Resolution&lt;/em&gt; drop down menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KFCYU.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KFCYU.png&quot; alt=&quot;Display Settings Showing a Higher Resolution&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Click &lt;em&gt;Apply&lt;/em&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7bqh5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7bqh5.png&quot; alt=&quot;Dialog Asking if the Display Looks OK&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;5&quot;&gt;&#xA;&lt;li&gt;In the dialog that appears, click &lt;em&gt;Keep This Configuration&lt;/em&gt; to confirm the display's updated resolution.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-16T15:24:34.427" LastActivityDate="2021-02-16T15:24:34.427" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26554" PostTypeId="1" CreationDate="2021-02-18T04:56:21.220" Score="0" ViewCount="146" Body="&lt;p&gt;I installed anaconda navigator and it installed successfully too. But when I write anaconda-navigator in terminal and press enter, the following screen comes but the anaconda-navigator does not start:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uAlDp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uAlDp.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I do not know that it is an anconda related problem or OS related.&lt;/p&gt;&#xA;&lt;p&gt;It is neither running in root or as normal user. If someone can guide me through this, I will be very grateful to them. Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="25164" LastEditorUserId="20782" LastEditDate="2021-02-18T13:20:39.843" LastActivityDate="2021-02-19T22:26:31.013" Title="Anaconda Navigator installed successfully but not opening in Elementary OS Hera. How can we resolve this?" Tags="|command-line|thirdpartyapps|python|shell|qt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26555" PostTypeId="2" ParentId="26554" CreationDate="2021-02-18T11:36:42.660" Score="1" Body="&lt;p&gt;I don't think you're supposed to run &lt;code&gt;anaconda-navigator&lt;/code&gt; as root.&lt;/p&gt;&#xA;&lt;p&gt;You'll want to make sure that you have installed the application as a normal user and &lt;em&gt;not as root&lt;/em&gt;.&#xA;So don't prefix the command to run the installer with &lt;em&gt;sudo&lt;/em&gt; but just run it with your current user's permissions.&lt;/p&gt;&#xA;&lt;p&gt;Once you're installed, try activating the Anaconda virtual environment before and then running the application.&#xA;This should add the program to your &lt;code&gt;PATH&lt;/code&gt;.&#xA;The steps below activate Anaconda's virtual environment and start &lt;code&gt;anaconda-navigator&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you installed Anaconda in your home directory in a folder called &lt;code&gt;anaconda3&lt;/code&gt;, the default location, then use the following command.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;source ~/anaconda3/bin/activate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Now run &lt;code&gt;anaconda-navigator&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;anaconda-navigator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This worked for me.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-02-19T22:26:31.013" LastActivityDate="2021-02-19T22:26:31.013" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26556" PostTypeId="1" CreationDate="2021-02-18T15:57:31.177" Score="0" ViewCount="90" Body="&lt;p&gt;I am unable to reboot successfully after recent updates that first took me from 5.4.0-48 to 5.40-54, then after ran a repair from the Grub menu, I was upgraded to 5.4.0-65. Neither of the last two boots successfully. I am currently able to fully boot if I choose 5.4.0-48. I checked repositories but am not seeing anything unique except a few &amp;quot;ENTIRELY UNSUPPORTED&amp;quot; bionic repos. Although I have an AMD graphics controller, I do not recall installing any specific drivers.&lt;/p&gt;&#xA;&lt;p&gt;I do recall that the last set of updates did not install and the OS kept getting stuck. I had also tried to install two free word processing apps from App Center which kept hanging as well.&lt;/p&gt;&#xA;&lt;p&gt;Can someone help me figure out what could be going on? Thanks in advance for any suggestons!&lt;/p&gt;&#xA;&lt;p&gt;Srini&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2023-12-11T03:10:51.423" Title="OS hanging on reboot after update" Tags="|boot|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26557" PostTypeId="1" CreationDate="2021-02-18T20:14:03.163" Score="0" ViewCount="785" Body="&lt;p&gt;Hi there I followed the instructions to make am install drive on a USB stick using Etcher. Had no problems creating however when I attempt to boot (I'm on OS X 11.2.1 Big Sur) and Elementary doesn't boot up. I see two EFI disks, neither of which boot. Is there anything else I can try, the instructions mention burning a disk which seems quite outdated, who actually uses a DVD burner anymore?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for the kind help and suggestions!&lt;/p&gt;&#xA;" OwnerUserId="25173" LastEditorUserId="15904" LastEditDate="2021-02-21T13:08:16.213" LastActivityDate="2024-03-08T01:07:10.980" Title="Install on MacBook Pro 16&quot; (2019)" Tags="|system-installation|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26560" PostTypeId="2" ParentId="21390" CreationDate="2021-02-20T05:50:30.197" Score="1" Body="&lt;p&gt;you cannot install this on this model, it will cause the gpu to stop working&lt;/p&gt;&#xA;" OwnerUserId="25184" LastActivityDate="2021-02-20T05:50:30.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26562" PostTypeId="2" ParentId="26557" CreationDate="2021-02-21T13:37:00.500" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/Dunedan/mbp-2016-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;Here&lt;/a&gt; you can find the most recent state of Macbook support under linux.&lt;/p&gt;&#xA;&lt;p&gt;Your model, according to &lt;a href=&quot;https://support.apple.com/en-us/HT201300&quot; rel=&quot;nofollow noreferrer&quot;&gt;Apple website&lt;/a&gt; is MacBookPro16,1 or MacBookPro16,4.&lt;/p&gt;&#xA;&lt;p&gt;Supossing your model is MacBookPro16,1. On the github site it specifies:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;The MacBookPro16,1 currently requires a 5.6-RC kernel and the latest amdgpu drivers.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So I think the issue is that you don't get screen output. Possible solutions involve installing this amdgpu driver manually and updating to a mainline kernel.&lt;/p&gt;&#xA;&lt;p&gt;Try to boot into any elementary option and press Ctrl+Alt+F1 to open a tty ( console view). Login with your user credentials ( login = your username) and execute &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;. The root password is the same as your password usually.&lt;/p&gt;&#xA;&lt;p&gt;To install the required kernel, the easiest way is to reboot and do it manually.&lt;/p&gt;&#xA;&lt;p&gt;Go to the &lt;a href=&quot;https://kernel.ubuntu.com/%7Ekernel-ppa/mainline/v5.6-rc7/&quot; rel=&quot;nofollow noreferrer&quot;&gt;mainline 5.6-RC website&lt;/a&gt; and download from the AMD64 version the debs in the 1st, 2nd, 4th,and 6th line (the generic versions basically). Then install all of them with &lt;code&gt;sudo apt install ./li*.deb&lt;/code&gt;. Make sure you open a terminal in the same folder as your files.&lt;/p&gt;&#xA;&lt;p&gt;For any other issue please refer to the linked github site.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-02-21T13:37:00.500" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26563" PostTypeId="2" ParentId="7726" CreationDate="2021-02-21T15:22:21.843" Score="1" Body="&lt;p&gt;I am on &lt;code&gt;Hera &lt;/code&gt; - Elementary 5.1.&lt;/p&gt;&#xA;&lt;p&gt;Tried many ways. This is the only way working for me.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[seats:*]&#xA;autologin-guest=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;/etc/lightdm/lightdm.conf.d/01-xx.conf&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;greeter-session=false&#xA;autologin-user=xx&#xA;autologin-user-timeout=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;lightdm --show-config&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;   [Seat:*]&#xA;G  greeter-session=false&#xA;A  user-session=pantheon&#xA;B  allow-guest=false&#xA;D  greeter-wrapper=/usr/lib/lightdm/lightdm-greeter-session&#xA;E  guest-wrapper=/usr/lib/lightdm/lightdm-guest-session&#xA;F  xserver-command=X -core&#xA;G  autologin-user=xx&#xA;G  autologin-user-timeout=0&#xA;H  autologin-guest=false&#xA;&#xA;   [LightDM]&#xA;C  backup-logs=false&#xA;&#xA;Sources:&#xA;A  /usr/share/lightdm/lightdm.conf.d/40-io.elementary.greeter.conf&#xA;B  /usr/share/lightdm/lightdm.conf.d/50-disable-guest.conf&#xA;C  /usr/share/lightdm/lightdm.conf.d/50-disable-log-backup.conf&#xA;D  /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf&#xA;E  /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf&#xA;F  /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf&#xA;G  /etc/lightdm/lightdm.conf.d/01-xx.conf&#xA;H  /etc/lightdm/lightdm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25188" LastActivityDate="2021-02-21T15:22:21.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26564" PostTypeId="2" ParentId="2801" CreationDate="2021-02-22T01:28:41.233" Score="1" Body="&lt;p&gt;Hi all i have upgraded my kernel using linux kernel updater from here &lt;a href=&quot;https://github.com/bkw777/mainline&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bkw777/mainline&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;kernel version in my elementary os is now 5.11, and everything works including my touchpad and display drivers&lt;/p&gt;&#xA;" OwnerUserId="25190" LastActivityDate="2021-02-22T01:28:41.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26565" PostTypeId="1" CreationDate="2021-02-22T12:16:39.387" Score="0" ViewCount="18" Body="&lt;p&gt;I have a programme installed and now I need to update to the most recent version which I have downloaded from their website as zip file. How can I update it?&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="24406" LastActivityDate="2021-02-22T12:16:39.387" Title="Updating software from a downloaded file" Tags="|updates|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26566" PostTypeId="2" ParentId="26340" CreationDate="2021-02-22T13:18:08.920" Score="0" Body="&lt;p&gt;Have you checked out &lt;a href=&quot;https://github.com/chasinglogic/tardis&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tardis&lt;/a&gt;, a backup application for elementary OS?&#xA;Deja Dup has worked great for me and remembers my hard drive when I plug it in and automatically runs backups on a schedule when I plug the drive in.&#xA;Can you hook into it to send a success notification?&#xA;You might also checkout &lt;a href=&quot;https://wiki.gnome.org/Apps/PikaBackup&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pika Backup&lt;/a&gt; though it's not automated yet.&#xA;You might try to extend existing solutions to better fit your use case before spinning out something new, but that's ultimately up to you.&#xA;My hunch is that a lot of people find the existing applications adequate, but perhaps you could garner feedback through issues with the projects as well and use feedback to gauge interest.&#xA;I'd personally love a backup solution that integrates with Btrfs and uses incremental sends / receives, but I'm certainly in the minority there.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-22T13:18:08.920" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26567" PostTypeId="1" CreationDate="2021-02-22T17:04:42.147" Score="0" ViewCount="9" Body="&lt;p&gt;experimenting with this distro, i stumbled across something odd. If you press the windows key on the logon screen, the screen rotate clockwise.&#xA;I can t find a key setting in the os that make this happen. When logged on it just show the key combinations.&#xA;Is the behavior that is &amp;quot;normal&amp;quot; to switch to tablet mode or something?.&lt;/p&gt;&#xA;&lt;p&gt;Kind regards from the Dutch ;-)&lt;/p&gt;&#xA;" OwnerUserId="25197" LastActivityDate="2021-02-22T17:04:42.147" Title="windows key, in logon screen" Tags="|greeter|keyboard-shortcuts|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26568" PostTypeId="1" CreationDate="2021-02-22T18:22:47.743" Score="0" ViewCount="163" Body="&lt;p&gt;I installed Slimbook battery so I could manage my laptop's battery better than with the tools provided in the system settings, but I am unable to add the icon to the tray for better access (rather than going to Applications &amp;gt; Accessories &amp;gt; Slimbook battery preferences and then having to type my password).&lt;/p&gt;&#xA;&lt;p&gt;Has anyone encountered some similar issue and found a solution? I'm running elementary OS 5.1.7 Hera, everything up-to-date. I tried installing &lt;code&gt;gnome-shell-extension-appindicator&lt;/code&gt; and rebooting. Typing in the command to start slimbookbattery writes that it is already started/executed.&lt;/p&gt;&#xA;" OwnerUserId="25198" LastEditorUserId="15904" LastEditDate="2021-06-09T20:17:24.237" LastActivityDate="2024-02-25T04:01:50.197" Title="Slimbookbattery status icon" Tags="|release-hera|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26570" PostTypeId="1" AcceptedAnswerId="27963" CreationDate="2021-02-22T23:40:39.863" Score="0" ViewCount="473" Body="&lt;p&gt;i have built a new pc recently, however the 2.5G isn't being picked up by elementary or any ubuntu based distro, any help?&lt;/p&gt;&#xA;" OwnerUserId="25201" LastActivityDate="2021-06-20T01:03:15.410" Title="New B550 asrock steel legend ethernet 2.5G not working or being detected" Tags="|networking|ethernet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26572" PostTypeId="2" ParentId="26568" CreationDate="2021-02-23T13:46:01.657" Score="0" Body="&lt;p&gt;elementary OS doesn't support app indicators out of the box and since it doesn't use GNOME Shell, the extension you mentioned won't work.&#xA;Have a look at &lt;a href=&quot;https://github.com/lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ayatana&lt;/a&gt; which is an extension providing indicators in elementary's wingpanel.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-23T13:46:01.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26573" PostTypeId="2" ParentId="13333" CreationDate="2021-02-23T18:46:59.763" Score="0" Body="&lt;p&gt;I guess it does not work for snap apps (?)&lt;/p&gt;&#xA;" OwnerUserId="25209" LastActivityDate="2021-02-23T18:46:59.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26574" PostTypeId="1" AcceptedAnswerId="26582" CreationDate="2021-02-23T23:15:53.503" Score="0" ViewCount="108" Body="&lt;p&gt;I decided to try Calendar as home base for mail.com calDAV, but I'm having trouble at the lowest level, even creating events manually. I am so not getting it. I've used generations of Outlook, iCal, and deprecated competitors, not a rookie, but whatever is happening with Calendar design is so foreign to me I'm just spinning my wheels and getting frustrated. If I need to ask one specific detail at a time here, I can.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-02-25T06:03:44.407" Title="Is there a primer/help/reference for Elementary OS Calendar?" Tags="|release-hera|calendar|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26575" PostTypeId="1" CreationDate="2021-02-23T23:47:42.547" Score="0" ViewCount="453" Body="&lt;p&gt;I'm trying to build the sound indicator, but I'm running into dependencies issues.&lt;/p&gt;&#xA;&lt;p&gt;I'm on elementary OS 5.1.7 Hera.&lt;br /&gt;&#xA;I've cloned the &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel-indicator-sound&lt;/a&gt; repo.&lt;br /&gt;&#xA;When building I'm getting this error:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;meson.build:28:0: ERROR:  Dependency &amp;quot;wingpanel&amp;quot; not found, tried pkgconfig and cmake&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Looks like I've got the relevant libs installed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt search libwingpanel &#xA;Sorting... Done&#xA;Full Text Search... Done&#xA;libwingpanel-2.0-0/bionic,now 2.3.2+r454+pkg48~ubuntu5.1.5.1 amd64 [installed,automatic]&#xA;  A super sexy space-saving top panel&#xA;&#xA;libwingpanel-2.0-dev/bionic,now 2.3.2+r454+pkg48~ubuntu5.1.5.1 amd64 [installed]&#xA;  Library to build plugins for WingPanel (development files)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've got the following version of the wingpanel:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt show wingpanel                &#xA;Package: wingpanel&#xA;Version: 2.3.2+r454+pkg48~ubuntu5.1.5.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;There is a change the indicator is already counting on the next version of elementary OS, but I'm not seeing that many updates.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/compare/2.1.8...master&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-sound/compare/2.1.8...master&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/releases&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-sound/releases&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I've build this indicator in the past.&lt;br /&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/pulls?q=author%3Apeteruithoven+is%3Apr&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-sound/pulls?q=author%3Apeteruithoven+is%3Apr&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I was hoping to do some reseach for this issue:&lt;br /&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/issues/185&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/wingpanel-indicator-sound/issues/185&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2024-03-11T03:09:56.210" Title="ERROR: Dependency &quot;wingpanel&quot; not found" Tags="|wingpanel|indicator-sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26578" PostTypeId="2" ParentId="26575" CreationDate="2021-02-24T18:06:59.910" Score="0" Body="&lt;p&gt;This is a recent change for how &lt;a href=&quot;https://github.com/elementary/wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;libwingpanel&lt;/a&gt; is packaged.&#xA;See the commit &lt;a href=&quot;https://github.com/elementary/wingpanel/commit/5cda994e40ee4101ae2f370ec40d7fe5d48bca46&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&#xA;Checkout the related change in wingpanel-indicator-sound in &lt;a href=&quot;https://github.com/elementary/wingpanel-indicator-sound/commit/845e631c420cca84a4807ec08f201be439a9ae88&quot; rel=&quot;nofollow noreferrer&quot;&gt;this commit&lt;/a&gt;.&#xA;Perhaps you need to build and install the latest wingpanel from source before building wingpanel-indicator-sound.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-24T18:06:59.910" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26581" PostTypeId="1" CreationDate="2021-02-25T04:16:03.697" Score="0" ViewCount="614" Body="&lt;p&gt;I'm having some trouble with the sound. In the System Settings, it says both &amp;quot;No Output Device&amp;quot; and &amp;quot;No Input Device,&amp;quot; and I can't seem to hear anything.&lt;/p&gt;&#xA;&lt;p&gt;My sound card (I think) is an Intel multimedia audio controller. I'm running eOS Hera 5.1.7 on an Asus Chromebook C434 Flip, and my kernel version is 5.4.&lt;/p&gt;&#xA;&lt;p&gt;I just installed eOS last night and completely removed Chrome OS, so eOS is all that's on it right now. So far, everything else seems to be working, including the camera and video--I can SEE videos on YouTube, just not hear them. (And I'm guessing that the lack of input device means the microphone doesn't work either...)&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance for any help! I'm relatively new to Linux and have not spent much time with eOS before.&lt;/p&gt;&#xA;" OwnerUserId="25216" LastEditorUserId="15904" LastEditDate="2021-06-09T20:23:09.253" LastActivityDate="2024-02-25T07:04:40.523" Title="Sound Issues--No Output or Input Device" Tags="|release-hera|sound|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26582" PostTypeId="2" ParentId="26574" CreationDate="2021-02-25T06:03:44.407" Score="0" Body="&lt;p&gt;I'll shut this down:&lt;/p&gt;&#xA;&lt;p&gt;There is no primer/help/reference for Elementary OS Calendar.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-02-25T06:03:44.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26584" PostTypeId="1" CreationDate="2021-02-25T11:02:51.223" Score="0" ViewCount="238" Body="&lt;p&gt;Quick question. I burnt the eOS into my usb flash drive and upon booting from it, I had the option of trying or installing eOS. I went for “try” because i thought installing would erase my entire ssd and replace Windows OS with elementary.&lt;/p&gt;&#xA;&lt;p&gt;I then switched back to windows and after some time booted eOS once again. Upon doing that, I was again sent to “try or install elementary”, I chose again chose 'try', and all of the changes I have previously made (e.g. downloaded a different browser) were discarded.&lt;/p&gt;&#xA;&lt;p&gt;What do I do? What will the “Install elementary” option do? Do I have to dual boot in order to save the changes?&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="25218" LastActivityDate="2024-03-17T12:02:10.330" Title="“Try vs Install elementary” with live USB" Tags="|live-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26589" PostTypeId="1" CreationDate="2021-02-27T01:49:11.977" Score="-1" ViewCount="126" Body="&lt;p&gt;My intel NUC not waking up after automatic suspend.&#xA;i use wireless mouse and keyboard. Pc not wake up after pressing keyboard or mouse.&#xA;also not wake up after pressing the power button.&lt;/p&gt;&#xA;" OwnerUserId="25234" LastActivityDate="2021-03-05T19:36:34.553" Title="PC not wake up after suspend" Tags="|release-hera|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26590" PostTypeId="1" CreationDate="2021-02-27T10:35:06.650" Score="0" ViewCount="92" Body="&lt;p&gt;I want to dual-boot with Windows 10 and thats why I'm going to install the os to a secondary drive. What partition should I create besides / and /home? I currently use legacy mode in the bios.&lt;/p&gt;&#xA;" OwnerUserId="25235" LastEditorUserId="20782" LastEditDate="2021-06-07T03:56:48.847" LastActivityDate="2024-02-22T11:03:25.490" Title="What partitions should I create during installation with legacy bios specification?" Tags="|system-installation|dual-boot|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26591" PostTypeId="2" ParentId="26590" CreationDate="2021-02-27T12:49:49.210" Score="0" Body="&lt;p&gt;For legacy BIOS mode, the very first partition should be a 1 MiB &lt;em&gt;Reserved BIOS boot area&lt;/em&gt;.&#xA;You have a couple of considerations regarding other partitions.&#xA;If you want to encrypt your root filesystem, you need a separate, unencrypted &lt;em&gt;/boot&lt;/em&gt; partition.&#xA;If you want hibernation, also known as suspend-to-disk, then I recommend a swap partition with at least as much disk space as RAM.&#xA;I also recommend that this be encrypted, but that gets a bit more complicated.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-02-27T12:49:49.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26592" PostTypeId="1" CreationDate="2021-02-27T13:33:25.600" Score="0" ViewCount="229" Body="&lt;p&gt;I am having problems with installing EOS on a 2018 MacBook air, it gives the error messages:&#xA;ACPI Error: Aborting Method.&#xA;ACPI BIOS error&#xA;Thunderbolt:ICM firmware is in wrong mode&#xA;xHCI Host controller not responding, assume dead.&lt;/p&gt;&#xA;" OwnerUserId="25237" LastActivityDate="2021-02-27T13:33:25.600" Title="How can I fix ElementaryOS not installing on a MacBook Air(2018) Intel" Tags="|macbook|install|error|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="26594" PostTypeId="1" CreationDate="2021-02-27T19:27:56.700" Score="0" ViewCount="26" Body="&lt;p&gt;Boa tarde. Instalei o Elementary 5 criando uma senha para o setup, que é chato, logo no in[icio do simbolo do elemntary, e criei a senha do login antes de entrar na página inicial do sistema, na área de trabalho mesmo. &lt;strong&gt;Resultado: quero trazer de volta a senha da página inicial do sistema, aquela do login, caso contrário o sistema inicia com a senha do setup mas pede a senha logo em seguida quando entro no chrome, por exemplo. É chato. prefiro trazer a senha novamente antes do login.&lt;/strong&gt; Como faço?&lt;/p&gt;&#xA;&lt;p&gt;Agradeço quem puder ajudar.Abraços&lt;/p&gt;&#xA;" OwnerUserId="25229" LastActivityDate="2024-03-16T17:05:50.683" Title="Tirei a senha da Janela de Login do Elementary 5, como recolocar" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26595" PostTypeId="1" CreationDate="2021-02-27T22:07:31.160" Score="0" ViewCount="108" Body="&lt;p&gt;I'm trying my hand at ElementaryOS, but not only am I not able to get wifi to work, I'm not even seeing it as an option.  I've looked through the knowledge base and tried all of the solutions that I've found there, but none of them have worked.  Upon logging in I do not see a wifi icon in the upper right hand corner.  In addition, if I click on Network Settings, I'm not seeing a wifi option there either.  I'm using a Dell Optiplex with a Netgear a6100 Wifi dongle and the latest version of Elementary updated via a wired connection.  Being limited to a wired network connection makes this all but useless so it's quite frustrating, to say the least.&lt;/p&gt;&#xA;" OwnerUserId="25239" LastEditorUserId="25239" LastEditDate="2021-02-28T20:44:50.490" LastActivityDate="2024-03-22T05:04:50.633" Title="No wifi option available at all" Tags="|wifi|networking|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26596" PostTypeId="1" CreationDate="2021-02-28T01:16:31.363" Score="0" ViewCount="42" Body="&lt;p&gt;So i'm on elementary OS 5.1.7 Hera, and i had some trouble with installing it, so in the end i have to go through recovery boot every time for it to boot - i'm mentioning that because maybe that's the cause of the problem. But basically i can't get night light, flux, redshift to work, and i can't control the brightness. I can't even control the brightness through teriminal, through various solutions i found online. anyone know what might be the problem?&lt;/p&gt;&#xA;" OwnerUserId="25240" LastActivityDate="2024-03-16T14:04:15.630" Title="why can't i change anything related to brightness on my system?" Tags="|release-hera|brightness|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26598" PostTypeId="1" CreationDate="2021-02-28T10:22:40.660" Score="1" ViewCount="171" Body="&lt;p&gt;I’m on Elementary 5.1.&#xA;Unable to copy .mpg files back to my USB. The file is around 5.5GB. My USB drive has more than 15GB of space free. I’m new to Linux, so I use the GUI default copy + paste for my needs.&lt;/p&gt;&#xA;&lt;p&gt;For some odd reason, the copy progress bar stops at the 4.4GB mark and just conks out. I get the “file is too large....” similar error. Please assist.&lt;/p&gt;&#xA;" OwnerUserId="25243" LastActivityDate="2021-02-28T12:49:54.413" Title="Why can’t I copy “large” files to USB?" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26600" PostTypeId="2" ParentId="26598" CreationDate="2021-02-28T12:49:54.413" Score="2" Body="&lt;p&gt;I think it is due to the FAT32 max file size limitation. You can read more about file systems here: &lt;a href=&quot;https://kb.sandisk.com/app/answers/detail/a_id/289/%7E/transferring-a-4gb-or-larger-file-to-a-usb-flash-drive-or-memory-card#:%7E:text=This%20is%20due%20to%20FAT32,NTFS%20will%20resolve%20this%20issue.&quot; rel=&quot;nofollow noreferrer&quot;&gt;Transferring a 4GB or larger file to a USB flash drive or memory card&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;In short, you most likely need to format your USB drive to a different file system. There are many ways to do that, but the most intuitive way to me is using the GNOME Disks application from the AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;WARNING&lt;/strong&gt;: this will delete everything from your drive, so make ure it does not contain anything you might need later!&lt;/p&gt;&#xA;&lt;p&gt;After installing it, plug in your drive, launch the application, &lt;strong&gt;select your drive in the left column&lt;/strong&gt; and then click the gear wheels and select &lt;code&gt;Format Partition...&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KeNkN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KeNkN.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Next, give your drive a new name and select NTFS (or you can use the &lt;code&gt;Other&lt;/code&gt; option to select exFAT) and click the &lt;code&gt;Next&lt;/code&gt; button and then the big red &lt;code&gt;Format&lt;/code&gt; button.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/sbb8B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sbb8B.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;After it completes, replug your drive and try copying files again.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2021-02-28T12:49:54.413" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26601" PostTypeId="1" CreationDate="2021-03-01T18:56:46.020" Score="-1" ViewCount="1327" Body="&lt;p&gt;I have tried every way I can to install Python 3.8 or 3.9. I have both tried the deadsnakes library and the compile method. Both them report success, but when I do a “python3 -V” it always returns “Python 3.6.9”.&lt;/p&gt;&#xA;&lt;p&gt;It is either not installing (weird because it says it is successful) or not reporting correctly. Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="25250" LastActivityDate="2021-03-03T11:27:40.950" Title="Installing Python 3.8 or 3.9" Tags="|python|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26602" PostTypeId="1" CreationDate="2021-03-01T19:52:29.400" Score="0" ViewCount="68" Body="&lt;p&gt;I have tried multiple times to install Elementary os 5.1 on a win 10 machine either in &amp;quot;try&amp;quot; or &amp;quot;install&amp;quot; mode. However it boots into UBUNTU!! Do not know why this is happening&lt;/p&gt;&#xA;" OwnerUserId="25251" LastActivityDate="2024-03-20T02:02:50.310" Title="When I install Elementary OS it boots to UBUNTU!" Tags="|boot|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26603" PostTypeId="2" ParentId="26596" CreationDate="2021-03-02T06:23:09.220" Score="0" Body="&lt;p&gt;For&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;go through recovery boot every time for it to boot&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Just make sure you set the correct boot sequence in bios.&lt;/p&gt;&#xA;&lt;p&gt;And for&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;night light, flux, redshift&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Are you using desktop or laptop? Is it support brightness control or night light in Windows 10? If windows doesn't work that mean your hardware doesn't have the ability to control brightness.&lt;/p&gt;&#xA;&lt;p&gt;If it works in Windows 10, check your kernel version using &lt;code&gt;uname -r&lt;/code&gt; in terminal. Are you using 4.15?&lt;/p&gt;&#xA;&lt;p&gt;I'm using kernel version 5.4 and so far so good here.&lt;/p&gt;&#xA;" OwnerUserId="23941" LastActivityDate="2021-03-02T06:23:09.220" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26604" PostTypeId="2" ParentId="26601" CreationDate="2021-03-02T10:09:30.880" Score="0" Body="&lt;p&gt;What could be happening is that you have multiple versions of python on your machine. It also happens with Java, PHP and others. If this is the case you can try to set an alias (on &lt;code&gt;~/.bashrc&lt;/code&gt;) for the version that you want, for example:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;alias python='/usr/bin/python3.9'&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Or using a tool like &lt;code&gt;update-alternatives&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;update-alternatives --list python&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;update-alternatives --config python&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;A nice tutorial can be found on this &lt;a href=&quot;https://linuxconfig.org/how-to-change-from-default-to-alternative-python-version-on-debian-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;post&lt;/a&gt;. It is for debian distributions but it does not change too much on Elementary.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2021-03-02T10:09:30.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26605" PostTypeId="2" ParentId="26594" CreationDate="2021-03-02T10:15:01.847" Score="0" Body="&lt;p&gt;Teoricamente você consegue definir as senhas e quando elas devem ser requisitadas nas contas de usuários &lt;code&gt;Ferramentas do sistema -&amp;gt; Configuracoes -&amp;gt; Contas de usuario&lt;/code&gt;. Lá você clica no seu usuário e define se quer pedir a senha no login ou logar automaticamente.&lt;/p&gt;&#xA;&lt;p&gt;Sobre pedir a senha para cada aplicativo que abre, isso pode estar relacionado se você está fazendo login automático com o perfil de convidado. Se esse for o caso, você pode marcar para desabilitar o usuário convidado e logar automaticamente com um perfil de administrador.&lt;/p&gt;&#xA;&lt;p&gt;Espero ter ajudado.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2021-03-02T10:15:01.847" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26606" PostTypeId="2" ParentId="26601" CreationDate="2021-03-02T11:35:38.603" Score="1" Body="&lt;p&gt;Only the Ubuntu / Debian packages name the executable for Python 3 &lt;code&gt;python3&lt;/code&gt;.&#xA;If you're compiling and installing from source, then the Python 3 executable should just be &lt;code&gt;python&lt;/code&gt;.&#xA;What is the output of &lt;code&gt;python -V&lt;/code&gt; and &lt;code&gt;which python&lt;/code&gt;?&lt;/p&gt;&#xA;&lt;p&gt;I've had great success with &lt;a href=&quot;https://github.com/asdf-vm/asdf&quot; rel=&quot;nofollow noreferrer&quot;&gt;asdf&lt;/a&gt; to run newer versions of Python and Ruby.&#xA;I've added the instructions here to install Python 3.9.2 with asdf for the Bash shell.&lt;/p&gt;&#xA;&lt;p&gt;Install dependencies for asdf.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install curl git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Download the v0.8.0 branch with Git.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/asdf-vm/asdf.git ~/.asdf --branch v0.8.0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you use Bash, then integrate asdf with your shell using the following.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;. $HOME/.asdf/asdf.sh&amp;quot; &amp;gt;&amp;gt; ~/.bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reload your shell configuration.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;source ~/.bashrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Add the Python plugin.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;asdf plugin add python&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install the dependencies required to build Python.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install make build-essential libssl-dev zlib1g-dev libbz2-dev \&#xA;  libreadline-dev libsqlite3-dev wget curl llvm libncurses5-dev xz-utils \&#xA;  tk-dev libxml2-dev libxmlsec1-dev libffi-dev liblzma-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install the desired version of Python.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;asdf install python 3.9.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Set the global Python version for your user.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;asdf global python 3.9.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastEditorUserId="20782" LastEditDate="2021-03-03T11:27:40.950" LastActivityDate="2021-03-03T11:27:40.950" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26607" PostTypeId="2" ParentId="24774" CreationDate="2021-03-02T12:35:37.343" Score="0" Body="&lt;p&gt;I was having problems using zsh on VSCode too. Following these steps here &lt;a href=&quot;https://dev.to/webdevfarhan/comment/fdd5&quot; rel=&quot;nofollow noreferrer&quot;&gt;from  Farhan Madani&lt;/a&gt; kinda solve my problem, as you can see...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/g677l.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g677l.png&quot; alt=&quot;VSCode terminal with zsh and PowerLevel10K&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;These fonts are not entirely perfect (don't know why yet), but do the work.&lt;/p&gt;&#xA;&lt;p&gt;In addition, I've just been reading the powerlevel10K instructions again with more attention, and found their &lt;a href=&quot;https://github.com/romkatv/powerlevel10k#manual-font-installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;font recomendation&lt;/a&gt;. After install all fonts they recommend it seems more ok now. Some icons seem to be less cut, but I think it is better now.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Iy41e.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Iy41e.png&quot; alt=&quot;VSCode terminal with zsh and powerlevel10K font recommendations&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="17238" LastEditorUserId="17238" LastEditDate="2021-03-02T13:25:42.320" LastActivityDate="2021-03-02T13:25:42.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26609" PostTypeId="2" ParentId="26584" CreationDate="2021-03-02T23:17:00.177" Score="0" Body="&lt;p&gt;most live distros only last one session. there are some images called persistent lives that allow saving your changes, but they are growingly uncommon. try option is meant to try the system before committing to install so you don't have to write your disk. if you plan on using the system on a daily basis then is time to install it. A dual boot setup us quite common and very easy to make. just make sure to pay attention to every step so you don't lose any data during install.&lt;/p&gt;&#xA;" OwnerUserId="25037" LastActivityDate="2021-03-02T23:17:00.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26610" PostTypeId="2" ParentId="25896" CreationDate="2021-03-03T07:01:39.960" Score="0" Body="&lt;p&gt;Thanks for any advice, but I will close this as it appears the process is too complex for online conversations, too much detail required. I continue to use the laptop in question, letting automatic things happen automatically.&lt;/p&gt;&#xA;&lt;p&gt;Anything further would probably require a deep understanding and dissection of every error message and log. My particular boot problem remains unchanged, but if I use this device daily it boots and logs in normally on first try. The workarounds continue without error as long as I reboot when it gets stuck, as if every dependent step is happy with the previous boot's automatic glitch repair. The most I've had are three reboots after not touching it for about two weeks, but now that I know it eventually works, I don't reach for the command line and just let it autopilot. I'm afraid that hardware is failing, in the long run, but diagnostic tools report all is fine.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-03-03T07:01:39.960" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26611" PostTypeId="1" CreationDate="2021-03-03T13:46:20.233" Score="0" ViewCount="33" Body="&lt;p&gt;I just installed Kubuntu by installing sdmm and tasksel. Now I'm getting the kubuntu environment but getting a lot of junkware in application menu. I want to uninstall kubuntu so that I can enjoy my old one. I can see Kubuntu only on my lockscreen but not on desktop homescreen.&lt;/p&gt;&#xA;" OwnerUserId="25264" LastActivityDate="2021-03-03T13:46:20.233" Title="How do I uninstall Kubuntu in elementary os?" Tags="|updates|system|desktop|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26613" PostTypeId="1" CreationDate="2021-03-03T15:12:08.440" Score="0" ViewCount="1148" Body="&lt;p&gt;I dual-booted my Windows laptop to elementary OS a while ago and made a mess of things with settings and software. I want to start over with a clean install. I do not have any files or data I need to save. I just want to restart elementary OS as if I were launching it for the first time. Is there a simple way to do this?&lt;/p&gt;&#xA;&lt;p&gt;I currently have elementary OS 5.1.7 Hera.&lt;/p&gt;&#xA;" OwnerUserId="23346" LastActivityDate="2021-04-04T21:06:30.703" Title="How do I execute a clean reinstall or factory reset of elementary OS?" Tags="|release-hera|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26614" PostTypeId="2" ParentId="26258" CreationDate="2021-03-04T12:19:41.093" Score="1" Body="&lt;p&gt;I had the same issue on my T480s with the fingerprint 06cb:009a which has no support on the libfprint. I believe the following solution could work for you as the T460s also uses a fingerprint reader from the &lt;em&gt;Validity Sensors Inc&lt;/em&gt;. I made it work going through a series of tutorials that lead me to this:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Setup &lt;a href=&quot;https://github.com/uunicorn/python-validity&quot; rel=&quot;nofollow noreferrer&quot;&gt;python-validity&lt;/a&gt;&lt;/strong&gt; (which is an alternative project that implemented this fingerprint reader)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt remove fprintd&#xA;$ sudo add-apt-repository ppa:uunicorn/open-fprintd&#xA;$ sudo apt-get update&#xA;$ sudo apt install open-fprintd fprintd-clients python3-validity&#xA;...wait a bit...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Register your fingers&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ fprintd-enroll&#xA;$ fprintd-verify&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;strong&gt;Login configuration for Elementary OS&lt;/strong&gt; (following some instructions from &lt;a href=&quot;https://wiki.archlinux.org/index.php/Fprint#Configuration&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arch Linux documentation&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Add &lt;code&gt;pam_fprintd.so&lt;/code&gt; as &lt;em&gt;sufficient&lt;/em&gt; to the top of the auth section of teh following files:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/etc/pam.d/common-session&#xA;/etc/pam.d/common-auth&#xA;/etc/pam.d/common-session&#xA;/etc/pam.d/common-password&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;Example:&lt;/em&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;auth      sufficient pam_fprintd.so&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For me, these are the files the covered most of the authentication places like, sudo, login, admin requests. Anyway, you can try to change other files in the pam.d folder to match your needs.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2021-03-04T12:19:41.093" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26616" PostTypeId="1" CreationDate="2021-03-05T14:06:09.083" Score="1" ViewCount="53" Body="&lt;p&gt;I tried to use both alacarte and menulibre to change my dock icons (for new PNG icons) but the changes don't work (only) on the dock even after I reboot.&lt;/p&gt;&#xA;&lt;p&gt;I tested with Chrome, the files folder icon and Ephiphany.&lt;/p&gt;&#xA;&lt;p&gt;I tried to restart plank only in the terminal. It didn't help.&lt;/p&gt;&#xA;" OwnerUserId="25275" LastEditorUserId="8517" LastEditDate="2021-06-09T20:22:46.817" LastActivityDate="2021-06-09T20:22:46.817" Title="Why don't Alacarte and Menulibre work for me when I try to change icons?" Tags="|plank|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26617" PostTypeId="2" ParentId="26613" CreationDate="2021-03-05T19:33:14.387" Score="1" Body="&lt;p&gt;Like say &lt;a href=&quot;https://elementaryos.stackexchange.com/users/23800/kgiii&quot;&gt;@KGII&lt;/a&gt; your have the option ERASE DISK when you have in the installation guide&lt;/p&gt;&#xA;&lt;p&gt;after little search with google&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/phePL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/phePL.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2021-03-05T19:33:14.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26618" PostTypeId="2" ParentId="26589" CreationDate="2021-03-05T19:36:34.553" Score="0" Body="&lt;p&gt;You are in the Help Center for Elemtary OS and not Intel for NUCs, so you are in the wrong place.&lt;/p&gt;&#xA;&lt;p&gt;But having a lot of experience in NUC you have to look at your settings in the BIOS of the NUC for USB and Wake Up by USB.&lt;/p&gt;&#xA;&lt;p&gt;This &lt;a href=&quot;https://www.intel.com/content/www/us/en/support/articles/000005522/intel-nuc.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;link&lt;/a&gt; can help you&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2021-03-05T19:36:34.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26619" PostTypeId="2" ParentId="26602" CreationDate="2021-03-05T19:40:46.743" Score="0" Body="&lt;p&gt;&lt;strong&gt;Make sure that you have downloaded the ISO from the official site&lt;/strong&gt; and that you have created a Bootable usb key from this ISO image and not another. There should be no problem testing or installing Elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.elementaryos-fr.org/telecharger-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;HERE&lt;/a&gt; the official place for download the ISO&lt;/p&gt;&#xA;" OwnerUserId="19360" LastActivityDate="2021-03-05T19:40:46.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26620" PostTypeId="2" ParentId="11345" CreationDate="2021-03-06T15:24:44.823" Score="-1" Body="&lt;pre&gt;&lt;code&gt;sudo ln -s /usr/share/ca-certificates/mozilla/* /opt/Citrix/ICAClient/keystore/cacerts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25281" LastEditorUserId="26" LastEditDate="2021-03-06T17:24:38.527" LastActivityDate="2021-03-06T17:24:38.527" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26621" PostTypeId="1" CreationDate="2021-03-06T17:27:02.193" Score="0" ViewCount="35" Body="&lt;p&gt;Ubuntu published on its twitter &lt;a href=&quot;https://twitter.com/FlutterDev/status/1367173897456480258&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flutter is the default choice for future @ubuntu apps.&lt;/a&gt; about standardizing its future applications with the flutter. It seems to me a good choice, since microsoft also intends to optimize windows for development with flutter &lt;a href=&quot;https://developers.googleblog.com/2021/03/announcing-flutter-2.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Microsoft is continuing to expand its support for Flutter.&lt;/a&gt;. I want to know if there will be any action or case study regarding the use of flutter by default in elementary os.&lt;/p&gt;&#xA;" OwnerUserId="18654" LastActivityDate="2021-04-07T13:02:20.377" Title="Does elementary intend to take any action regarding the use of flutter, as well as ubuntu?" Tags="|microsoft-windows|ubuntu|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26624" PostTypeId="1" CreationDate="2021-03-07T18:44:46.983" Score="0" ViewCount="138" Body="&lt;p&gt;I am using elementary 5.1.7&#xA;When I run &lt;code&gt;msgcat --color=test&lt;/code&gt; it shows&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rHWCX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rHWCX.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;Yellow, green and cyan are off. I believe that the elementary terminal colour scheme is a problem because when I ssh from my MacBook to the Elementary desktop, I get normal output.&lt;/p&gt;&#xA;&lt;p&gt;I can set the palette using dconf. However, I don't know where to get the defaults.&lt;/p&gt;&#xA;&lt;p&gt;Where can I get those colours?&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2021-12-03T16:00:50.077" Title="How to fix elementary terminal color pallette?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26625" PostTypeId="2" ParentId="26546" CreationDate="2021-03-07T19:54:15.790" Score="0" Body="&lt;p&gt;Searching on Synaptic package Manager, I have found 'elementary-shared-folder'. No need to install nautilus IMHO.&lt;/p&gt;&#xA;&lt;p&gt;Best regards.&lt;/p&gt;&#xA;" OwnerUserId="25292" LastActivityDate="2021-03-07T19:54:15.790" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26627" PostTypeId="1" CreationDate="2021-03-08T01:49:12.637" Score="0" ViewCount="37" Body="&lt;p&gt;boa noite. Sou novo aqui e novo no Linux e estou maravilhado com o Elementary OS 5.1 (Hera). Já deveria ter migrado anos antes. Nunca mais Windows.&lt;/p&gt;&#xA;&lt;p&gt;Como estou estudando sozinho, instalei o Stacer para aumentar a velocidade da inicialização, fiz alguns testes retirando algumas coisas e não adiantou, quase tenho que formatar, como muito sacrifício e pesquisa consegui reativar. &lt;strong&gt;Retirei inicialmente o NetworkManager-wait-online.service e não prestou&lt;/strong&gt;, não consegui acessar a rede de forma alguma depois e parece que outros apps dependem dele. Ficou horrível, mas corrigi. &lt;strong&gt;Depois retirei o avahi-daemon e trouxe de volta.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Gente, por favor, para evitar que eu faça maiores pepinos, fiz 08 prints com o que o Stacer mostra no startup, e do terminal. Se possível, &lt;strong&gt;me ajudem por favor com o que retirar no STARTUP do STACER ou pelo TERMINAL para melhorar a inicialização&lt;/strong&gt;. Me parece que não dá para anexar tudo. Então segue abaixo o do terminal e em anexo os prints do Stacer com o link, mas não sei se saiu certo o link das imagens, são 8:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Com o systemd-analyze:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Startup finished in 3.454s (firmware) + 5.619s (loader) + 5.303s (kernel) + 1min 27.852s (userspace) = 1min 42.228s&#xA;graphical.target reached after 37.333s in userspace&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Com o systemd-analyze blame, os primeiros 50:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;     53.487s apt-daily.service&#xA;     18.240s dev-sda2.device&#xA;      8.495s dev-loop5.device&#xA;      7.702s dev-loop14.device&#xA;      7.626s snapd.service&#xA;      7.518s dev-loop13.device&#xA;      7.136s dev-loop12.device&#xA;      6.731s dev-loop11.device&#xA;      6.439s dev-loop9.device&#xA;      6.217s dev-loop7.device&#xA;      6.106s dev-loop10.device&#xA;      6.106s dev-loop8.device&#xA;      6.106s dev-loop4.device&#xA;      6.106s dev-loop0.device&#xA;      6.105s dev-loop6.device&#xA;      6.105s dev-loop3.device&#xA;      5.332s ufw.service&#xA;      4.229s dev-loop2.device&#xA;      4.195s dev-loop1.device&#xA;      3.985s systemd-udevd.service&#xA;      3.167s systemd-fsck@dev-disk-by\x2duuid-FEBE\x2dEA7F.service&#xA;      2.908s udisks2.service&#xA;      2.693s networkd-dispatcher.service&#xA;      2.676s ModemManager.service&#xA;      2.643s grub-common.service&#xA;      2.629s lvm2-monitor.service&#xA;      2.463s accounts-daemon.service&#xA;      2.356s gpu-manager.service&#xA;      1.825s alsa-restore.service&#xA;      1.825s systemd-logind.service&#xA;      1.823s speech-dispatcher.service&#xA;      1.818s lm-sensors.service&#xA;      1.817s avahi-daemon.service&#xA;      1.813s thermald.service&#xA;      1.812s rsyslog.service&#xA;      1.804s pppd-dns.service&#xA;      1.801s nvidia-persistenced.service&#xA;      1.790s systemd-tmpfiles-setup-dev.service&#xA;      1.785s NetworkManager.service&#xA;      1.283s systemd-modules-load.service&#xA;      1.134s systemd-rfkill.service&#xA;      1.118s apt-daily-upgrade.service&#xA;      1.079s snap-nmap-2254.mount&#xA;      1.078s snap-libreoffice-204.mount&#xA;      1.077s snap-wine\x2dplatform\x2d5\x2dstable-16.mount&#xA;      1.002s snap-gnome\x2d3\x2d28\x2d1804-145.mount&#xA;       938ms systemd-sysctl.service&#xA;       935ms snap-wine\x2dplatform\x2druntime-216.mount&#xA;       848ms snap-whatsdesk-20.mount&#xA;       847ms snap-snapd-11036.mount&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Com o systemd-analyze critical-chain:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;The time after the unit is active or started is printed after the &amp;quot;@&amp;quot; character.&#xA;The time the unit takes to start is printed after the &amp;quot;+&amp;quot; character.&lt;/p&gt;&#xA;&lt;p&gt;graphical.target @37.333s&lt;a href=&quot;https://i.stack.imgur.com/DnK9r.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DnK9r.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;└─multi-user.target @37.333s&#xA;└─snapd.seeded.service @37.288s +44ms&#xA;└─snapd.service @29.658s +7.626s&#xA;└─basic.target @29.643s&#xA;└─sockets.target @29.643s&#xA;└─snapd.socket @29.641s +1ms&#xA;└─sysinit.target @29.579s&#xA;└─systemd-timesyncd.service @29.467s +110ms&#xA;└─systemd-tmpfiles-setup.service @28.688s +756ms&#xA;└─local-fs.target @28.684s&#xA;└─run-user-1000-gvfs.mount @1min 2.417s&#xA;└─run-user-1000.mount @1min 1.647s&#xA;└─local-fs-pre.target @7.114s&#xA;└─lvm2-monitor.service @4.485s +2.629s&#xA;└─lvm2-lvmetad.service @6.468s&#xA;└─lvm2-lvmetad.socket @4.484s&#xA;└─system.slice @4.372s&#xA;└─-.slice @4.294s&lt;/p&gt;&#xA;&lt;p&gt;Agradeço imensamente e peço desculpas antecipadas pelo texto grande e pelo abuso. Grande Abraço.&lt;/p&gt;&#xA;" OwnerUserId="25229" LastActivityDate="2021-03-08T01:49:12.637" Title="Como otimizar a inicialização no Elementary OS com o Stacer ou terminal: o que posso tirar?" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26628" PostTypeId="1" CreationDate="2021-03-08T09:24:10.567" Score="0" ViewCount="612" Body="&lt;p&gt;Is it possible to watch Netflix or play Spotify on Epiphany browser?&lt;/p&gt;&#xA;" OwnerUserId="25296" LastActivityDate="2021-04-08T16:00:08.417" Title="Epiphany browser, DRM capabilities" Tags="|epiphany|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26629" PostTypeId="2" ParentId="26624" CreationDate="2021-03-08T12:55:39.917" Score="0" Body="&lt;p&gt;You can reset the default palette with &lt;code&gt;gsettings reset&lt;/code&gt; as follows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings reset io.elementary.terminal.settings palette&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-03-08T12:55:39.917" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26630" PostTypeId="2" ParentId="26621" CreationDate="2021-03-08T13:01:31.587" Score="1" Body="&lt;p&gt;It's unlikely to happen anytime soon.&#xA;Flutter is still a very young framework and elementary focuses on stability.&#xA;Since elementary already has a blessed toolchain, Vala, I'm not sure why they would do this.&#xA;Changing this would force developers who have already invested in Vala to learn Flutter and Dart and that seems like a lot to ask.&#xA;It seems that apps built for elementary are supposed to be built specifically for elementary and &lt;em&gt;not&lt;/em&gt; cross-platform.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-03-08T13:01:31.587" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26631" PostTypeId="2" ParentId="26624" CreationDate="2021-03-08T14:00:24.237" Score="1" Body="&lt;p&gt;I've found that this color palette is default in elementary.&#xA;I decided to copy palette from iterm2:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings palette '#000000:#c91b00:#00c200:#c7c400:#0225c7:#c930c7:#00c5c7:#feffff:#676767:#ff6d67:#5ff967:#fefb67:#6871ff:#ff76ff:#5ffdff:#c7c7c7'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It gives colors that in the end resemble rainbow much better&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZXsIp.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZXsIp.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24567" LastActivityDate="2021-03-08T14:00:24.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26633" PostTypeId="1" CreationDate="2021-03-08T16:13:03.697" Score="0" ViewCount="124" Body="&lt;p&gt;I need to set a hot corner to minimize current window. But the only default option is to maximise current window or set a custom command. I can't figure out the command line command to minimise a window.&lt;/p&gt;&#xA;" OwnerUserId="25298" LastActivityDate="2023-12-24T21:02:30.353" Title="Custom command to minimize current window" Tags="|user-interface|elementary-project|hot-corners|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26634" PostTypeId="1" CreationDate="2021-03-08T16:36:48.203" Score="1" ViewCount="116" Body="&lt;p&gt;Does anyone know if it's possible to print only the selected part of a web page to a PDF in Epiphany? I've tried searching for a solution, but couldn't find anything, though I could be searching for the wrong thing.&lt;/p&gt;&#xA;" OwnerUserId="14107" LastActivityDate="2021-03-09T13:27:10.810" Title="Epiphany: Print selection" Tags="|epiphany|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26636" PostTypeId="2" ParentId="26633" CreationDate="2021-03-08T18:08:41.453" Score="0" Body="&lt;p&gt;Go to Desktop &amp;gt; Hot Corners, select the corner you want and choose &lt;code&gt;Execute custom command&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vGe0I.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vGe0I.png&quot; alt=&quot;custom command&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then add the following code:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.pantheon.desktop.gala.behavior hotcorner-bottomright 'minimize-current'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-03-08T18:08:41.453" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26637" PostTypeId="1" AcceptedAnswerId="26638" CreationDate="2021-03-08T19:32:40.953" Score="0" ViewCount="118" Body="&lt;p&gt;Hi I just installed elementary OS 5.1.7 Hera, and my battery lasts 10min.&lt;/p&gt;&#xA;&lt;p&gt;My laptop:&#xA;Dual-Core Intel® Core™ i5-7200U CPU @ 2.50GHz&#xA;Intel Corporation HD Graphics 620 (rev 02)&#xA;NVIDIA Corporation GP108M [GeForce MX150] (rev a1)&#xA;8,1 GB memory&lt;/p&gt;&#xA;&lt;p&gt;I was using loki before that, and I could watch a movie (720p - 2 hours), now it's 10min with screen on.&lt;/p&gt;&#xA;&lt;p&gt;Previous installation I had nothing special installed for the battery.&lt;/p&gt;&#xA;&lt;p&gt;Do you have any idea what I might do to fix that?&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="25301" LastActivityDate="2021-04-08T13:00:20.200" Title="5.1.7 Hera - awful battery performance" Tags="|release-hera|nvidia|battery|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26638" PostTypeId="2" ParentId="26637" CreationDate="2021-03-09T12:20:52.050" Score="1" Body="&lt;p&gt;You can install the latest version of &lt;a href=&quot;https://linrunner.de/tlp/#&quot; rel=&quot;nofollow noreferrer&quot;&gt;TLP&lt;/a&gt; using it's PPA following the steps below from &lt;a href=&quot;https://www.jwillikers.com/power-management-on-linux-with-tlp&quot; rel=&quot;nofollow noreferrer&quot;&gt;this blog post&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install the necessary package for easily adding PPA’s.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Add the TLP PPA to your system to get the latest version of TLP.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -uy ppa:linrunner/tlp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Install TLP.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt -y install tlp tlp-rdw&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;TLP will start automatically at boot, but to start it now without rebooting, do so manually.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo tlp start&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-03-09T12:20:52.050" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26639" PostTypeId="2" ParentId="26628" CreationDate="2021-03-09T13:26:09.780" Score="1" Body="&lt;p&gt;It's not currently possible, sorry. Stay tuned, though....&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2021-03-09T13:26:09.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26640" PostTypeId="2" ParentId="26634" CreationDate="2021-03-09T13:27:10.810" Score="1" Body="&lt;p&gt;It is not possible, I'm afraid.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2021-03-09T13:27:10.810" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26641" PostTypeId="2" ParentId="26546" CreationDate="2021-03-09T14:07:21.003" Score="0" Body="&lt;p&gt;Sorry,&lt;/p&gt;&#xA;&lt;p&gt;You have to add this ppa on your repositories : &lt;a href=&quot;http://ppa.launchpad.net/yunnxx/elementary/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://ppa.launchpad.net/yunnxx/elementary/ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The elementary-shared-folder is in this repository :&lt;/p&gt;&#xA;&lt;p&gt;$ sudo add-apt-repository ppa:yunnxx/elementary&#xA;$ sudo apt update&#xA;$ sudo apt install elementary-shared-folder&lt;/p&gt;&#xA;&lt;p&gt;Best regards&lt;/p&gt;&#xA;" OwnerUserId="25096" LastActivityDate="2021-03-09T14:07:21.003" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26642" PostTypeId="1" CreationDate="2021-03-09T16:17:55.110" Score="0" ViewCount="120" Body="&lt;p&gt;when I try to click Purchase elementary OS nothing happens. I tried in different computers, incognito mode, deactivating adblock and extensions and nothing.&lt;/p&gt;&#xA;" OwnerUserId="25303" LastActivityDate="2021-04-08T19:01:10.093" Title="unable to download elementary OS" Tags="|download|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="26645" PostTypeId="2" ParentId="21387" CreationDate="2021-03-09T20:35:19.480" Score="0" Body="&lt;p&gt;This code in Terminal should fix it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ mkdir -p ~/.config/pkcs11/modules&#xA;$ curl https://gitlab.gnome.org/GNOME/gnome-keyring/raw/ff229abca62db366c84dfe58035324f6d8ca6059/pkcs11/rpc-layer/gnome-keyring.module.in &amp;gt; ~/.config/pkcs11/modules/gnome-keyring.module&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugzilla.gnome.org/show_bug.cgi?id=736640#c27&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugzilla.gnome.org/show_bug.cgi?id=736640#c27&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-03-09T20:35:19.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26648" PostTypeId="1" CreationDate="2021-03-10T17:00:24.353" Score="0" ViewCount="29" Body="&lt;p&gt;Boa tarde pessoal. Quero melhorar a inicialização do desktop no Elementary OS 5 Hera.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;PS. DESCULPEM A TAG, MAS ISSO É UMA MERDA&lt;/strong&gt;!&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Fiz a seguinte mudança que achei num post:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;cd /etc/xdg/autostart&lt;/p&gt;&#xA;&lt;h1&gt;mv at-spi-dbus-bus.desktop at-spi-dbus-bus.disabled&lt;/h1&gt;&#xA;&lt;p&gt;&lt;strong&gt;Por favor, nesses arquivos listados tem algo que possa fazer para melhorar na inicialização do desktop?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;at-spi-dbus-bus.disabled org.gnome.SettingsDaemon.Housekeeping.desktop&#xA;com.github.spheras.desktopfolder-autostart.desktop org.gnome.SettingsDaemon.Housekeeping-pantheon.desktop&#xA;gala-daemon.desktop org.gnome.SettingsDaemon.Keyboard.desktop&#xA;gnome-keyring-gpg-pantheon.desktop org.gnome.SettingsDaemon.Keyboard-pantheon.desktop&#xA;gnome-keyring-pkcs11.desktop org.gnome.SettingsDaemon.MediaKeys.desktop&#xA;gnome-keyring-pkcs11-pantheon.desktop org.gnome.SettingsDaemon.MediaKeys-pantheon.desktop&#xA;gnome-keyring-secrets.desktop org.gnome.SettingsDaemon.Mouse.desktop&#xA;gnome-keyring-secrets-pantheon.desktop org.gnome.SettingsDaemon.Mouse-pantheon.desktop&#xA;gnome-keyring-ssh.desktop org.gnome.SettingsDaemon.Power.desktop&#xA;gnome-keyring-ssh-pantheon.desktop org.gnome.SettingsDaemon.Power-pantheon.desktop&#xA;indicator-application.desktop org.gnome.SettingsDaemon.PrintNotifications.desktop&#xA;io.elementary.appcenter-daemon.desktop org.gnome.SettingsDaemon.PrintNotifications-pantheon.desktop&#xA;io.elementary.calendar-daemon.desktop org.gnome.SettingsDaemon.Rfkill.desktop&#xA;io.elementary.cerbere.desktop org.gnome.SettingsDaemon.Rfkill-pantheon.desktop&#xA;io.elementary.desktop.agent-geoclue2-daemon.desktop org.gnome.SettingsDaemon.ScreensaverProxy.desktop&#xA;io.elementary.desktop.agent-polkit.desktop org.gnome.SettingsDaemon.Sharing.desktop&#xA;io.elementary.dpms-helper.desktop org.gnome.SettingsDaemon.Sharing-pantheon.desktop&#xA;io.elementary.onboarding.desktop org.gnome.SettingsDaemon.Smartcard.desktop&#xA;io.elementary.wingpanel.desktop org.gnome.SettingsDaemon.Smartcard-pantheon.desktop&#xA;light-locker.desktop org.gnome.SettingsDaemon.Sound.desktop&#xA;nm-applet.desktop org.gnome.SettingsDaemon.Sound-pantheon.desktop&#xA;nvidia-settings-autostart.desktop org.gnome.SettingsDaemon.Wacom.desktop&#xA;onboard-autostart.desktop org.gnome.SettingsDaemon.Wacom-pantheon.desktop&#xA;onboard-autostart-pantheon.desktop org.gnome.SettingsDaemon.XSettings.desktop&#xA;orca-autostart.desktop org.gnome.SettingsDaemon.XSettings-pantheon.desktop&#xA;orca-autostart-pantheon.desktop pantheon-parental-controls-client.desktop&#xA;org.gnome.SettingsDaemon.A11ySettings.desktop plank.desktop&#xA;org.gnome.SettingsDaemon.A11ySettings-pantheon.desktop polkit-gnome-authentication-agent-1.desktop&#xA;org.gnome.SettingsDaemon.Clipboard.desktop pulseaudio.desktop&#xA;org.gnome.SettingsDaemon.Clipboard-pantheon.desktop spice-vdagent.desktop&#xA;org.gnome.SettingsDaemon.Color.desktop user-dirs-update-gtk.desktop&#xA;org.gnome.SettingsDaemon.Color-pantheon.desktop user-dirs-update-gtk-pantheon.desktop&#xA;org.gnome.SettingsDaemon.Datetime.desktop xdg-user-dirs.desktop&#xA;org.gnome.SettingsDaemon.Datetime-pantheon.desktop&lt;/p&gt;&#xA;" OwnerUserId="25229" LastActivityDate="2021-03-10T17:00:24.353" Title="Como melhorar a inicialização do Desktop no cd /etc/xdg/autostart do Elementary OS 5 Hera?" Tags="|capnet-assist|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26651" PostTypeId="1" AcceptedAnswerId="26655" CreationDate="2021-03-11T13:32:39.920" Score="0" ViewCount="85" Body="&lt;p&gt;i'm on Elementary OS and want to install Dark Theme , Somebody Can Help Me ? Thanks&lt;/p&gt;&#xA;" OwnerUserId="25280" LastEditorUserId="20782" LastEditDate="2021-04-11T22:47:48.203" LastActivityDate="2021-04-27T23:13:18.140" Title="ElementaryOS Whan't too install dark theme" Tags="|themes|elementary-project|elementary-website|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26652" PostTypeId="2" ParentId="24871" CreationDate="2021-03-11T15:55:13.043" Score="0" Body="&lt;h3&gt;Autostart Nextcloud desktop client in background&lt;/h3&gt;&#xA;&lt;p&gt;Should add &lt;code&gt;--background&lt;/code&gt; switch to bin, example &lt;code&gt;/usr/bin/nextcloud --background&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Autostart folder location is &lt;code&gt;~/.config/autostart&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2021-03-11T15:55:13.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26653" PostTypeId="2" ParentId="15653" CreationDate="2021-03-11T17:20:32.923" Score="0" Body="&lt;p&gt;I had the same problem. For quite some time, I used another application called &lt;code&gt;Eddy&lt;/code&gt; available on the AppCenter. However, I had some issues with dependencies.&lt;/p&gt;&#xA;&lt;p&gt;If one doesn't have enough knowledge of &lt;code&gt;dpkg&lt;/code&gt; and &lt;code&gt;apt&lt;/code&gt;, I'd still suggest using 'GDebi.' I don't know why the GUI front-end gives problems in Elementary OS. I guess this is because if you open &lt;code&gt;GDebi&lt;/code&gt; from a regular user account, it freezes since it is somehow prevented from asking &lt;code&gt;sudo&lt;/code&gt; permissions.&lt;/p&gt;&#xA;&lt;p&gt;My solution is to run &lt;code&gt;GDebi&lt;/code&gt; from command line under &lt;code&gt;sudo&lt;/code&gt;, that is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo  gdebi  path_to/file.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I never had issues with this approach.&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2021-03-11T17:20:32.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26655" PostTypeId="2" ParentId="26651" CreationDate="2021-03-11T22:11:27.200" Score="0" Body="&lt;p&gt;Parts of Dark theme could be enabled via elementary-tweaks. Search the web, install it and enable it. It's not full Dark on Hera.&lt;/p&gt;&#xA;" OwnerUserId="25096" LastActivityDate="2021-03-11T22:11:27.200" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26656" PostTypeId="2" ParentId="1859" CreationDate="2021-03-12T00:01:49.797" Score="0" Body="&lt;p&gt;Try to remove space in 'Screenshot Monitor.exe', for example&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cp /usr/share/ssm/Screenshot\ Monitor.exe /usr/share/ssm/sm.exe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then change &lt;code&gt;/usr/share/applications/Screenshot\ Monitor.desktop&lt;/code&gt; to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Exec=mono '/usr/share/ssm/sm.exe'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25326" LastActivityDate="2021-03-12T00:01:49.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26658" PostTypeId="2" ParentId="26548" CreationDate="2021-03-12T13:54:42.960" Score="0" Body="&lt;p&gt;I reinstalled Hera and now my windows are appearing. Gave it a few weeks of testing here and there to verify the repair. I did notice something my computer did with the displays:&lt;/p&gt;&#xA;&lt;p&gt;Apparently, it sees two different displays instead of one (under Applications &amp;gt; System Settings &amp;gt; Displays). I couldn't remove the duplicate display, but I turned on Mirror Display and it displays just one. I'm going to keep this setting, but I would like to find a solution to the dual display bug on my laptop.&lt;/p&gt;&#xA;&lt;p&gt;Has anyone see this kind of bug?&lt;/p&gt;&#xA;" OwnerDisplayName="user25162" LastActivityDate="2021-03-12T13:54:42.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26659" PostTypeId="1" AcceptedAnswerId="26669" CreationDate="2021-03-12T16:07:48.630" Score="0" ViewCount="35" Body="&lt;pre&gt;&lt;code&gt;using Cairo ;&#xA;using Gtk ;&#xA;using GLib ;&#xA;&#xA;public class ClockWidget : DrawingArea {&#xA;&#xA;    private Time time ;&#xA;    private int minute_offset ;&#xA;    private bool dragging ;&#xA;    &#xA;    public signal void time_changed (int hour, int minute) ;&#xA;    &#xA;     public ClockWidget () {&#xA;        add_events (Gdk.EventMask.BUTTON_PRESS_MASK&#xA;                  | Gdk.EventMask.BUTTON_RELEASE_MASK&#xA;                  | Gdk.EventMask.POINTER_MOTION_MASK); &#xA;        update () ;&#xA;        &#xA;        Timeout.add (1000, update) ;&#xA;    &#xA;        set_size_request (100, 100) ;&#xA;    }&#xA;    &#xA;    public override bool draw (Cairo.Context cr) {&#xA;        int y = get_allocated_height () / 2 ;&#xA;        int x = get_allocated_width ()  / 2 ;&#xA;        var radius = double.min (get_allocated_width () / 2,&#xA;                                 get_allocated_height () / 2) - 5 ;&#xA;                                 &#xA;        // clock back&#xA;        cr.arc (x, y, radius, 0, 2 * 3.14) ;&#xA;        cr.set_source_rgb (1, 1, 1) ;&#xA;        cr.fill_preserve () ;&#xA;        cr.set_source_rgb (0, 0, 0) ;&#xA;        cr.stroke () ;&#xA;        &#xA;        // clock ticks&#xA;        for (int i = 0; i &amp;lt; 12; i++) {&#xA;            int inset ;&#xA;            &#xA;            cr.save () ;&#xA;            &#xA;            if (i % 3 == 0) {&#xA;                inset = (int) (0.2 * radius) ;&#xA;            } else {&#xA;                inset = (int) (0.1 * radius) ;&#xA;                cr.set_line_width (0.5 * cr.get_line_width ()) ;&#xA;            }&#xA;            &#xA;            cr.move_to (x + (radius - inset) * Math.cos (i * Math.PI / 6),&#xA;                            y + (radius - inset) * Math.sin (i * Math.PI / 6));&#xA;            cr.line_to (x + radius * Math.cos (i * Math.PI / 6),&#xA;                        y + radius * Math.sin (i * Math.PI / 6));&#xA;            cr.stroke ();&#xA;            cr.restore ();&#xA;        }&#xA;        &#xA;        // clock hands&#xA;        var hours = this.time.hour ;&#xA;        var minutes = this.time.minute + this.minute_offset ;&#xA;        var seconds = this.time.second ;&#xA;        &#xA;        /* hour hand: the hour hand is rotated 30 degrees (pi/6r) per hour + 1/2 a degree (pi/360r) per minute */&#xA;        cr.save () ;&#xA;        cr.set_line_width (2.5 * cr.get_line_width ()) ;&#xA;        cr.move_to (x, y) ;&#xA;        cr.line_to (x + radius / 2 * Math.sin (Math.PI / 6 * hours&#xA;                                             + Math.PI / 360 * minutes),&#xA;                    y + radius / 2 * -Math.cos (Math.PI / 6 * hours&#xA;                                              + Math.PI / 360 * minutes));&#xA;        cr.stroke ();&#xA;        cr.restore ();&#xA;&#xA;        // minute hand:&#xA;        // the minute hand is rotated 6 degrees (pi/30 r) per minute&#xA;        cr.move_to (x, y);&#xA;        cr.line_to (x + radius * 0.75 * Math.sin (Math.PI / 30 * minutes),&#xA;                    y + radius * 0.75 * -Math.cos (Math.PI / 30 * minutes));&#xA;        cr.stroke ();&#xA;                        &#xA;        // seconds hand:&#xA;        // operates identically to the minute hand&#xA;        cr.save ();&#xA;        cr.set_source_rgb (1, 0, 0); // red&#xA;        cr.move_to (x, y);&#xA;        cr.line_to (x + radius * 0.7 * Math.sin (Math.PI / 30 * seconds),&#xA;                    y + radius * 0.7 * -Math.cos (Math.PI / 30 * seconds));&#xA;        cr.stroke ();&#xA;        cr.restore ();&#xA;        &#xA;        return false ;&#xA;    }&#xA;    &#xA;    public override bool button_press_event (Gdk.EventButton event) {&#xA;        var minutes = this.time.minute + this.minute_offset;&#xA;&#xA;        // From&#xA;        // http://mathworld.wolfram.com/Point-LineDistance2-Dimensional.html&#xA;        var px = event.x - get_allocated_width () / 2;&#xA;        var py = get_allocated_height () / 2 - event.y;&#xA;        var lx = Math.sin (Math.PI / 30 * minutes);&#xA;        var ly = Math.cos (Math.PI / 30 * minutes);&#xA;        var u = lx * px + ly * py;&#xA;&#xA;        // on opposite side of origin&#xA;        if (u &amp;lt; 0) {&#xA;            return false;&#xA;        }&#xA;&#xA;        var d2 = Math.pow (px - u * lx, 2) + Math.pow (py - u * ly, 2);&#xA;        &#xA;        if (d2 &amp;lt; 25) {      // 5 pixels away from the line&#xA;            this.dragging = true;&#xA;            print (&amp;quot;got minute hand\n&amp;quot;);&#xA;        }&#xA;&#xA;        return false;&#xA;    }&#xA;&#xA;    public override bool button_release_event (Gdk.EventButton event) {&#xA;        if (this.dragging) {&#xA;            this.dragging = false;&#xA;            emit_time_changed_signal ((int) event.x, (int) event.y);&#xA;        }&#xA;        return false;&#xA;    }&#xA;&#xA;    public override bool motion_notify_event (Gdk.EventMotion event) {&#xA;        if (this.dragging) {&#xA;            emit_time_changed_signal ((int) event.x, (int) event.y);&#xA;        }&#xA;        return false;&#xA;    }&#xA;&#xA;    private void emit_time_changed_signal (int x, int y) {&#xA;        // decode the minute hand&#xA;        // normalise the coordinates around the origin&#xA;        x -= get_allocated_width () / 2;&#xA;        y -= get_allocated_height () / 2;&#xA;&#xA;        // phi is a bearing from north clockwise, use the same geometry as&#xA;        // we did to position the minute hand originally&#xA;        var phi = Math.atan2 (x, -y);&#xA;        if (phi &amp;lt; 0) {&#xA;            phi += Math.PI * 2;&#xA;        }&#xA;&#xA;        var hour = this.time.hour;&#xA;        var minute = (int) (phi * 30 / Math.PI);&#xA;        &#xA;        // update the offset&#xA;        this.minute_offset = minute - this.time.minute;&#xA;        redraw_canvas ();&#xA;&#xA;        time_changed (hour, minute);&#xA;    }&#xA;&#xA;    private bool update () {&#xA;        // update the time&#xA;        this.time = Time.local (time_t ());&#xA;        redraw_canvas ();&#xA;        return true;        // keep running this event&#xA;    }&#xA;    &#xA;    private void redraw_canvas () {&#xA;        var window = get_window ();&#xA;        if (null == window) {&#xA;            return;&#xA;        }&#xA;&#xA;        var region = window.get_clip_region ();&#xA;        // redraw the cairo canvas completely by exposing it&#xA;        window.invalidate_region (region, true);&#xA;        window.process_updates (true);&#xA;    }&#xA;&#xA;    static int main (string[] args) {&#xA;    &#xA;    Gtk.init (ref args);&#xA;    var window = new Window ();&#xA;    var clock = new ClockWidget ();&#xA;&#xA;    window.add (clock);&#xA;    window.destroy.connect (Gtk.main_quit);&#xA;    window.show_all ();&#xA;&#xA;    Gtk.main ();&#xA;&#xA;    return 0;&#xA;    }&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Lj58F.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Lj58F.png&quot; alt=&quot;This is the error&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How do I solve it??&lt;/p&gt;&#xA;" OwnerUserId="23610" LastEditorUserId="23610" LastEditDate="2021-03-13T03:51:32.750" LastActivityDate="2021-03-14T11:27:45.210" Title="Technical error while using Cairo" Tags="|vala|gtk|programming|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26661" PostTypeId="2" ParentId="25524" CreationDate="2021-03-12T19:12:15.723" Score="0" Body="&lt;p&gt;you tried 'ALSA' and 'jackaudio connection kit'?&lt;/p&gt;&#xA;&lt;p&gt;which DAW do you use?&lt;/p&gt;&#xA;&lt;p&gt;the versions of jack audio are out of date, hoping they integrate the 'up to date' once.&#xA;you can take a look at 'rncbc' site, he is the maker of these content. he have also .deb packages on githaub, you can install via 'Eddy' but run not perfectly.&lt;/p&gt;&#xA;&lt;p&gt;the 600-3 is an USB interface, that has 'class compliant mode'?&lt;/p&gt;&#xA;&lt;p&gt;Greets&#xA;Muuhman&lt;/p&gt;&#xA;" OwnerDisplayName="user25332" LastActivityDate="2021-03-12T19:12:15.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26662" PostTypeId="2" ParentId="24107" CreationDate="2021-03-12T19:32:27.340" Score="-1" Body="&lt;p&gt;is not a good way to integrate this in the system. the system should stay with small and clean footprint. sorry - i think - in present and future there are/will too many Crap in a OS&lt;/p&gt;&#xA;&lt;p&gt;a keyboard, that can store key-kombinations is for me a perfect deal.&#xA;please think about 'ergodox ez' without lightshow.&lt;/p&gt;&#xA;" OwnerDisplayName="user25332" LastActivityDate="2021-03-12T19:32:27.340" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26664" PostTypeId="1" CreationDate="2021-03-13T10:11:57.040" Score="0" ViewCount="143" Body="&lt;p&gt;Just a quick question, if you can help here.&lt;/p&gt;&#xA;&lt;p&gt;I am trying to install elementary OS 6.0 (daily build &lt;code&gt;20210312&lt;/code&gt;) in a VirtualBox (ver. 6.1) running on a Xubuntu 20.10 (if that matters).&lt;/p&gt;&#xA;&lt;p&gt;Playing with the &amp;quot;live&amp;quot; version is fine, but when I want to install it, it seems that the disk is not selectable.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/FQzfy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FQzfy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any ideas / hints, please?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="25334" LastActivityDate="2024-03-27T20:07:05.870" Title="elementary 6.0 (Odin) daily (20210312) cannot be installed on VirtualBox (disk disabled)" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26665" PostTypeId="2" ParentId="26664" CreationDate="2021-03-13T11:29:50.783" Score="0" Body="&lt;p&gt;The issue was related to the fact that the disk was too small.&#xA;Probably something like 15 GB would work. I made it 20 GB and so the disk could be selected and installation continue.&lt;/p&gt;&#xA;&lt;p&gt;Filled in &lt;a href=&quot;https://github.com/elementary/installer/issues/501&quot; rel=&quot;nofollow noreferrer&quot;&gt;this issue&lt;/a&gt; for tracking and solving it.&lt;/p&gt;&#xA;" OwnerUserId="25334" LastActivityDate="2021-03-13T11:29:50.783" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26666" PostTypeId="2" ParentId="25272" CreationDate="2021-03-13T17:43:02.003" Score="0" Body="&lt;p&gt;I'm almost a year late, but I was having this exact issue until now.&#xA;What fixed it for me was to run this command after resuming from suspend mode:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;$ pulseaudio -k&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="25336" LastEditorUserId="25336" LastEditDate="2021-03-14T14:16:11.143" LastActivityDate="2021-03-14T14:16:11.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26667" PostTypeId="2" ParentId="1775" CreationDate="2021-03-13T20:19:44.323" Score="0" Body="&lt;p&gt;I'm going to try Timeshift (which backs up only system data) and Baqpaq (for user data). I've kept my system and data drive separate for a decade so this fits with my approach.&lt;/p&gt;&#xA;&lt;p&gt;Tony states his product is similar to applications like rsnapshot (via Terminal [apt-get] or Synaptic), BackInTime [AppCenter (non-curated)] and TimeVault (unmaintained) so you may want to give one of those a try.&lt;/p&gt;&#xA;&lt;p&gt;I've used Tony's Aptik data migration tool to move a media-center install to another machine and it worked splendidly so I believe he builds good products at a good price. Aptik is $25 and Baqpaq $19. Timeshift is gratis.&lt;/p&gt;&#xA;" OwnerUserId="14743" LastActivityDate="2021-03-13T20:19:44.323" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26668" PostTypeId="1" AcceptedAnswerId="26682" CreationDate="2021-03-14T09:51:02.287" Score="0" ViewCount="72" Body="&lt;p&gt;I tried to update drivers through the appstore and after rebooting my computer I could not get past login. I have tried these things:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Remove the .Xauthority file, and chown it.&lt;/li&gt;&#xA;&lt;li&gt;Reinstall elementary-desktop and pantehon (also the greeter)&lt;/li&gt;&#xA;&lt;li&gt;Install new ubuntu-drivers&lt;/li&gt;&#xA;&lt;li&gt;Create a new account&lt;/li&gt;&#xA;&lt;li&gt;Move, rename and remove the at-spi-dbus.desktop file&lt;/li&gt;&#xA;&lt;li&gt;Reinstall lightdm&lt;/li&gt;&#xA;&lt;li&gt;Install os from usb stick (Elementary os and ubuntu, these did not work because I got this error: &amp;quot;(initramfs) unable to find a live medium containing a live file system&amp;quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;For a while it was even worse because I could not get to login because my screen was constanlty flickering, but I got this fixed by changing some config file X11Authority to yes.&lt;/p&gt;&#xA;&lt;p&gt;Is there any way to fix my computer or is it bricked? :D&lt;/p&gt;&#xA;" OwnerUserId="25338" LastEditorUserId="25338" LastEditDate="2021-03-14T19:20:09.317" LastActivityDate="2021-03-16T12:46:54.367" Title="Stuck on login after installing driverupdates" Tags="|greeter|desktop|pantheon|" AnswerCount="1" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="26669" PostTypeId="2" ParentId="26659" CreationDate="2021-03-14T11:27:45.210" Score="0" Body="&lt;p&gt;You've got a linking error there where the linker can't find the &lt;code&gt;pow&lt;/code&gt; function in any linked &lt;code&gt;DSO&lt;/code&gt;, &lt;em&gt;dynamic shared library&lt;/em&gt;.&#xA;&lt;code&gt;pow&lt;/code&gt; is almost certainly the math function for power and if we check the Valac documentation for &lt;a href=&quot;https://valadoc.org/glib-2.0/GLib.Math.pow.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Math.pow&lt;/a&gt;, the math C library needs to be linked in explicitly with &lt;code&gt;valac -X -lm ...&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20782" LastActivityDate="2021-03-14T11:27:45.210" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26673" PostTypeId="1" CreationDate="2021-03-14T21:56:16.917" Score="0" ViewCount="771" Body="&lt;p&gt;According to WinHQ :&lt;a href=&quot;https://wiki.winehq.org/Ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;Installing WineHQ packages&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo dpkg --add-architecture i386&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;wget -nc https://dl.winehq.org/wine-builds/winehq.key&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-key add winehq.key&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Until here: everything is fine.&lt;/p&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo add-apt-repository 'deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main'&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --install-recommends winehq-stable&#xA;[sudo] password for XXXX:         &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;**The following packages have unmet dependencies:&#xA; winehq-stable : Depends: wine-stable (= 6.0.0~focal-1)&#xA;E: Unable to correct problems, you have held broken packages**&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Suggested by other users:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Run Synaptic -&amp;gt; fix broken packages -&amp;gt; did not work&lt;/li&gt;&#xA;&lt;li&gt;Run Synaptic -&amp;gt; find all wine dependencies -&amp;gt; delete all -&amp;gt; repeat installation process -&amp;gt; did not work&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Help?&lt;/p&gt;&#xA;" OwnerUserId="25341" LastEditorUserId="4427" LastEditDate="2021-06-09T20:23:05.373" LastActivityDate="2022-03-18T19:06:55.053" Title="unmet dependencies: winehq-stable" Tags="|wine|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26674" PostTypeId="1" CreationDate="2021-03-15T03:19:27.163" Score="0" ViewCount="13" Body="&lt;p&gt;The &amp;quot;Purchase elementary OS&amp;quot; button in elementary.io page doesn't work. I tried with safari, brave and Firefox on multiple Mac's. It doesn't matter whether I select a preset amount or enter a custom amount, the button never changed to &amp;quot;Download ...&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Is there a workaround you could suggest?&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&#xA;David&lt;/p&gt;&#xA;" OwnerUserId="25342" LastActivityDate="2021-03-15T03:19:27.163" Title="Purchase elementary OS button unresponsive" Tags="|download|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26675" PostTypeId="1" CreationDate="2021-03-15T03:41:47.103" Score="0" ViewCount="99" Body="&lt;p&gt;Does anyone else has their elementary os being kinda slow: to login it takes a while, to change the brightness or the volume it takes a few seconds to do so, when i click on the keyboard-settings in the settings app???&#xA;My laptop is definitely not that slow:&#xA;&lt;strong&gt;Dual-Core Intel® Core™ i5-7200U CPU @ 2.50GHz&#xA;Intel Corporation HD Graphics 620 (rev 02)&#xA;8,0 GB memory&#xA;116,1 GB storage&#xA;Linux gabriel-Aspire-A515-51 5.4.0-66-generic #74~18.04.2-Ubuntu SMP Fri Feb 5 11:17:31 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux GTK 3.22.30&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="25343" LastActivityDate="2021-03-15T03:41:47.103" Title="OS is slow, giving a quite bad user experience" Tags="|system|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26676" PostTypeId="1" AcceptedAnswerId="26681" CreationDate="2021-03-15T05:32:06.907" Score="0" ViewCount="52" Body="&lt;p&gt;Context; saving Mac backups using another PC with eOS boot SSD to store duplicates. Repeatable failure using Files to copy music archive, about 15K item count and 125GB total. The source is iTunes storage in the style of Music/Artist/Album/Song:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;external 2TB cap HDD over USB, fast enough, feels like a five&#xA;minute copy if it could finish&lt;/li&gt;&#xA;&lt;li&gt;scroll dialogue opens with correct count/size&lt;/li&gt;&#xA;&lt;li&gt;scroll stops reporting around the 1st GB, probably hung&lt;/li&gt;&#xA;&lt;li&gt;system monitor reports about 50% CPU then squats there, probably&#xA;hung&lt;/li&gt;&#xA;&lt;li&gt;file destination quickly reaches about 30GB, but best attempt was 64GB&lt;/li&gt;&#xA;&lt;li&gt;directory check shows some jumping around, but somewhat alphabetical&#xA;with gaps&lt;/li&gt;&#xA;&lt;li&gt;new attempts repeatably copy or skip the same subdirectories, although stopping at varied points&lt;/li&gt;&#xA;&lt;li&gt;some system files without read permission skipped, as expected&lt;/li&gt;&#xA;&lt;li&gt;not asking me to skip unreadable after first attempt, maybe cached&#xA;response?&lt;/li&gt;&#xA;&lt;li&gt;similar results whether drag-drop or context menu copy-paste&lt;/li&gt;&#xA;&lt;li&gt;no problems with copied heirarchy structure&lt;/li&gt;&#xA;&lt;li&gt;can successfully copy missing, nested directories individually&lt;/li&gt;&#xA;&lt;li&gt;can successfully copy smaller samples, up to 6GB so far&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I'm proceeding with my manual workaround, a few GB at a time so I can check results before moving on; for example, the &amp;quot;As&amp;quot; were about 3GB and I could count subdirectories on my fingers and toes. Smaller bites won't take long but I'm asking about Files behaviour because the unexpected failure is disturbing. The silver lining is that it's obvious something is wrong by checking top level count/size if the dialogue appears frozen.&lt;/p&gt;&#xA;&lt;p&gt;Does Files have known hard limits or throughput problems? Please don't worry about my expectations; I still recall swapping 5MB pie platters and 10MB tapes, so copying 15K file systems is magic. I didn't find other complaints or recommended Files replacements online, which suggests my issue might be local.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-03-16T10:27:42.477" Title="What might cause Files to abort or fail a big copy?" Tags="|release-hera|pantheon-files|macintosh|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26681" PostTypeId="2" ParentId="26676" CreationDate="2021-03-16T10:27:42.477" Score="1" Body="&lt;p&gt;There are a number of outstanding issues reported against Files in relation to file operations involving very large number of files. Files is currently best used for small to modest amounts or data (&amp;lt;10K items?). A crash might be caused by a memory leak for example. One of the proposals for this year's GSOC is the improvement of the aspect of Files.&lt;/p&gt;&#xA;&lt;p&gt;Note also that because the system might cache file operations, Files may think that the operation is complete but it is still continuing in the background.&lt;/p&gt;&#xA;&lt;p&gt;I would recommend using a specialist program like Grsync for backing up large volumes of data rather than a general purpose file manager. Or you could install another filemanager from the AppCenter. If you otherwise like elementaryos then there are certainly solutions other than switching to another distro.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-03-16T10:27:42.477" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26682" PostTypeId="2" ParentId="26668" CreationDate="2021-03-16T12:46:54.367" Score="0" Body="&lt;p&gt;I used another USB-stick to install the OS and it was successful.&lt;/p&gt;&#xA;" OwnerUserId="25338" LastActivityDate="2021-03-16T12:46:54.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26683" PostTypeId="1" CreationDate="2021-03-16T15:48:47.947" Score="0" ViewCount="36" Body="&lt;p&gt;&lt;strong&gt;UPDATED 2021-03-21 Added New Diagnostic Information and Updated Title&lt;/strong&gt;&#xA;The problem still occurs and appears to be a serious issue with the elementary OS custom file dialogue component.&lt;/p&gt;&#xA;&lt;p&gt;UPDATE I thought this group was for bug reports. I was wrong. Now I moved the bug report to the bugreporting lists on GITHUB. See &lt;a href=&quot;https://github.com/elementary/applications-menu/issues/468&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/applications-menu/issues/468&lt;/a&gt;  For other users, elementary OS maintains a separate Bug Reporting system via GitHub (not this stackexchange group). See &lt;a href=&quot;https://elementary.io/docs/code/reference#avoid-subjective-or-ambiguous-adjectives&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/code/reference#avoid-subjective-or-ambiguous-adjectives&lt;/a&gt; for a detailed list to report bugs to the bug system, not support system (as is stackexchange). Bug reporting tool via System Settings...Info...Report a Problem.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;The crashing appears intermittently but frequently. I ammnd the original report below to indicate that the issue applies to more than just web-based PDFs. for example, the crashes occur when saving a document created in LibreOffice Writer.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Summary&lt;/strong&gt;&#xA;Attempt to save a web-based PDF results in an immediate crash of the web browser/PDf viewer. Cannot SAVE web PDFs. Occurring for at least a month.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;System Info&lt;/strong&gt;&#xA;elementary OS 5.1.7 Hera (updated to 2021-03-16)&#xA;any web browser (Firefox 86.0 x64 or Chromium Version 89.0.4389.82)&#xA;System Memory 32GB&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Description&lt;/strong&gt;&#xA;Open a website using any web browser.&#xA;Identify a PDF.&#xA;Select the PDF.&#xA;The browser (example Firefox) opens a dialogue window: What should Firefox do with this file?.&#xA;Any attempt to SAVE or SAVE AS the file results in an abrupt and immediate crash of the web browser.&lt;/p&gt;&#xA;&lt;p&gt;Similar situation in Chromium.&#xA;PDF opens in Chromium but any attempt to SAVE results in a sudden and immediate crash.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Effect&lt;/strong&gt;&#xA;Cannot use elementary OS to save web-sourced PDFs.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note&lt;/strong&gt;&#xA;I thought that this might be a flatpak issue. I did &lt;code&gt;flatpak list&lt;/code&gt; and NONE OF THE BROWSERS are installed via flatpak (they do not appear in the list). The browsers are default apt package manager/appcenter installations.&lt;/p&gt;&#xA;" OwnerUserId="12058" LastEditorUserId="12058" LastEditDate="2021-03-21T17:46:07.990" LastActivityDate="2021-03-27T21:03:50.493" Title="Moved to BugReport/SAVE Operations Result in Immediate Application Crashes Hera 5.1.7 (March 2021)" Tags="|web-browser|bugs|internet-browser|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26684" PostTypeId="1" CreationDate="2021-03-17T09:10:35.340" Score="0" ViewCount="57" Body="&lt;p&gt;i downloaded Minevtaft to play it on my Elementry os system.&#xA;When i installed the game and open it this happened:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QsAUo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QsAUo.jpg&quot; alt=&quot;The issue&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And when i close and re-open the game. window is becoming smaller and smaller. The resson why i post here is i tryed playing minecraft on ubuntu that works here but idk why but the game is not  working correctly here.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Edit:&lt;/strong&gt; İ Solved the problem by downloading an other launcher that supports original minecraft accounts. No Help Needed&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="25356" LastEditorUserId="25356" LastEditDate="2021-03-17T10:09:12.917" LastActivityDate="2023-12-09T22:03:50.487" Title="Minecraft is havinng size problems in elemenry os" Tags="|graphics|window-management|apps|window-manager|games|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26686" PostTypeId="1" CreationDate="2021-03-18T09:29:55.540" Score="0" ViewCount="33" Body="&lt;p&gt;Using Brave, Firefox and Safari on macOS 11.2, clicking the &amp;quot;Purchase&amp;quot; button does nothing.&#xA;Is there an alternate way to get eOS?&lt;/p&gt;&#xA;" OwnerUserId="25358" LastActivityDate="2021-03-18T09:29:55.540" Title="Purchase button won't work on https://elementary.io/ website" Tags="|download|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26688" PostTypeId="1" CreationDate="2021-03-18T14:27:48.217" Score="0" ViewCount="93" Body="&lt;p&gt;I use a program called OpenSCAD to do 3D modelling. It saves its files as filename.scad&lt;/p&gt;&#xA;&lt;p&gt;So now I want and .scad file to open with OpenSCAD, so: Right-Click, select Open With, select Other Application, and make sure the &amp;quot;Set as Default&amp;quot; box is checked.&lt;/p&gt;&#xA;&lt;p&gt;Great. That works.&lt;/p&gt;&#xA;&lt;p&gt;Later, I find that opening any .txt file opens it in OpenSCAD.&lt;/p&gt;&#xA;&lt;p&gt;Weird. So I re-associate .txt files with notepad and check &amp;quot;Set as Default&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Now all my OpenSCAD files are opening in notepad.&lt;/p&gt;&#xA;&lt;p&gt;It should be pointed out that OpenSCAD files are just text files.&lt;/p&gt;&#xA;&lt;p&gt;So, how do I go about associating an application with a particular file extension instead of a file type, as it appears to be doing?&lt;/p&gt;&#xA;" OwnerUserId="19226" LastActivityDate="2024-04-05T10:03:45.477" Title="How do I associate file extensions with a specific application?" Tags="|applications|default|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26689" PostTypeId="2" ParentId="15115" CreationDate="2021-03-19T06:13:43.913" Score="0" Body="&lt;p&gt;Well, by now, you may have found a solution or have given up (considering this was asked 3 years ago as of posting this) But if you're still looking for an answer, or you're a user reading this having the same issue, I would say using Mailspring instead of Pantheon would be the way to go for now. Maybe this'll be fixed in the future, but for now, this'll suffice. &lt;a href=&quot;https://getmailspring.com/setup/access-icloud-via-imap-smtp&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://getmailspring.com/setup/access-icloud-via-imap-smtp&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25364" LastActivityDate="2021-03-19T06:13:43.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26690" PostTypeId="2" ParentId="26522" CreationDate="2021-03-19T09:51:32.410" Score="0" Body="&lt;p&gt;It would be fantastic if someone could lay down a best-practice for doing this that would include how to save your files, programs, and settings, install 6, then import your files, programs, and settings from 5.1.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-03-19T09:51:32.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26693" PostTypeId="1" CreationDate="2021-03-19T18:32:36.253" Score="1" ViewCount="126" Body="&lt;p&gt;I just purchased elementary os so I can try it out and I see that it is getting ready for a major upgrade this year. Do you pay for each major upgrade or do you receive the upgrade automatically when it is released? I'm new to the linux world and trying to figure out how upgrades work once I commit to an operating system.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="25367" LastActivityDate="2021-05-10T20:02:25.207" Title="Elementary OS major upgrade purchases" Tags="|updates|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26695" PostTypeId="1" CreationDate="2021-03-19T20:11:23.213" Score="0" ViewCount="15" Body="&lt;p&gt;I guess this is the discussion forum, so I'm raising the issue here. I saw an article stating that Inter has been selected as the system font, but its capital &amp;quot;i&amp;quot; looks like a lower-case L. A font without crossbars on the capital &amp;quot;i&amp;quot; is pretty much a bad choice for anything, but certainly a system font.&lt;/p&gt;&#xA;&lt;p&gt;Thoughts?&lt;/p&gt;&#xA;" OwnerUserId="25370" LastActivityDate="2021-03-19T20:11:23.213" Title="The selected system font, Inter, does not have crossbars on the capital I. This is a bad choice" Tags="|system|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="26697" PostTypeId="2" ParentId="26688" CreationDate="2021-03-20T18:11:20.577" Score="0" Body="&lt;p&gt;Thanks for the explanation. It sounds like something any Linux OS could add as a feature; Autmatic Extension Override wherein the OS opens a user-specified application for user-specified file types in order to avoid these conflicts.&lt;/p&gt;&#xA;&lt;p&gt;And, yes, OpenSCAD files are just generic text files.&lt;/p&gt;&#xA;" OwnerUserId="25373" LastActivityDate="2021-03-20T18:11:20.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26698" PostTypeId="2" ParentId="26522" CreationDate="2021-03-21T14:09:12.520" Score="0" Body="&lt;p&gt;When you're using a common Linux distribution make sure to keep everything important in your personal &amp;quot;home&amp;quot; folder: every kind of personal documents, personal configuration files, applications and scripts you downloaded or wrote yourself, and so on.&lt;/p&gt;&#xA;&lt;p&gt;This approach makes a sufficient separation between your system and your files, which enables you to backup your personal files just copying your &amp;quot;home&amp;quot; folder somewhere else and then restoring it. Keep in mind that this is a very basic approach though, because there are others backup methods where automations and file system logics are involved.&lt;/p&gt;&#xA;" OwnerUserId="24708" LastActivityDate="2021-03-21T14:09:12.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26701" PostTypeId="2" ParentId="903" CreationDate="2021-03-22T07:09:43.770" Score="0" Body="&lt;p&gt;If you like me couldn't mount the cd through the file manager, this is the way I solved it.&lt;/p&gt;&#xA;&lt;p&gt;I simply made the &lt;code&gt;VBoxGuestAdditions.iso&lt;/code&gt; available on the local lan at the host (Mac OS Big Sur) by running &lt;code&gt;python -m SimpleHTTPServer&lt;/code&gt; in the folder where the iso-file is at: &lt;code&gt;/Applications/VirtualBox.app/Contents/MacOS/&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ cd /Applications/VirtualBox.app/Contents/MacOS/&#xA;$ python -m SimpleHTTPServer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I then used the web browser &lt;strong&gt;on the guest os&lt;/strong&gt; to fetch the iso-file to the guest-os (elementary os hera) &lt;code&gt;http://10.0.2.2:8000&lt;/code&gt; on my machine. Find the file and click to download.&lt;/p&gt;&#xA;&lt;p&gt;I used &lt;code&gt;netstat -rn&lt;/code&gt; on the guest to find the gateway ip to the host:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ netstat -rn&#xA;&#xA;Kernel IP routing table&#xA;Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface&#xA;0.0.0.0         10.0.2.2        0.0.0.0         UG        0 0          0 enp0s3&#xA;10.0.2.0        0.0.0.0         255.255.255.0   U         0 0          0 enp0s3&#xA;169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 enp0s3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally I mounted the iso-file in the guest os:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount VBoxGuestAdditions.iso /mnt/host_download_mountpoint -o loop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And ran the script:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/mnt/host_download_mountpoint/VBoxLinuxAdditions.run&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Success!&lt;/p&gt;&#xA;" OwnerUserId="4025" LastActivityDate="2021-03-22T07:09:43.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26702" PostTypeId="1" CreationDate="2021-03-22T11:53:34.627" Score="0" ViewCount="31" Body="&lt;p&gt;I'm having a little issue with the greeter. It's supposed that the greeter shows user name and user background (wallpaper) but in my case the wallpaper is not being updated, never mind how many times I change it, greeter always show Hera defaults background.&#xA;Any idea?&#xA;Thanks for your time and help.&lt;/p&gt;&#xA;" OwnerUserId="25204" LastActivityDate="2021-03-22T11:53:34.627" Title="Greeter doesn't update user background" Tags="|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="26703" PostTypeId="2" ParentId="24606" CreationDate="2021-03-22T13:26:43.650" Score="0" Body="&lt;p&gt;I had this problem too after a system update.  Relogging fixed it.&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-03-22T13:26:43.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26704" PostTypeId="2" ParentId="26693" CreationDate="2021-03-22T13:30:24.947" Score="1" Body="&lt;p&gt;The software is free and open-source, donations are optional.&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-03-22T13:30:24.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26705" PostTypeId="1" CreationDate="2021-03-22T16:36:34.270" Score="0" ViewCount="29" Body="&lt;p&gt;I got VNC to fire up (using X11VNCServer) and I can connect ok.&lt;/p&gt;&#xA;&lt;p&gt;HOWEVER&lt;/p&gt;&#xA;&lt;p&gt;If there isn't a monitor connected to the remote machine I get a white screen, that is very small.  With a monitor I get the full background, desktop, etc.  If the monitor is turned off, I get the white screen as well (I still can get to Applications, but the screen is fairly small and not all that usable)&lt;/p&gt;&#xA;&lt;p&gt;Am I missing something?  Or is this the expected behavior?  I have read that it's tricky to get VNC to work at all, so just trying to understand limitations.&lt;/p&gt;&#xA;" OwnerUserId="25381" LastActivityDate="2021-03-22T16:36:34.270" Title="Using VNC with Herra seems to require a monitor to be connected to machine?" Tags="|vnc|" AnswerCount="0" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="26706" PostTypeId="2" ParentId="26693" CreationDate="2021-03-22T22:19:19.733" Score="0" Body="&lt;p&gt;Got it, thank you. I was just wondering if you need to re-install the major software update similar to how you originally install the os vs through their built in software interface from within the os. I should have been more clear about that. Appreciate your response!&lt;/p&gt;&#xA;" OwnerUserId="25369" LastActivityDate="2021-03-22T22:19:19.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26708" PostTypeId="2" ParentId="26684" CreationDate="2021-03-23T10:45:09.430" Score="0" Body="&lt;p&gt;I solved the problem.&lt;/p&gt;&#xA;&lt;p&gt;If you do play Minecraft, the launcher for the game has an issue with it's window shadow. This can be fixed easily. Type in this command in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /usr/share/applications/minecraft-launcher.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;find line &amp;quot;Exec&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RK8Cj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RK8Cj.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and add: env GTK_CSD=0&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/frpGk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/frpGk.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;save file and lunch minecraft&lt;/p&gt;&#xA;" OwnerUserId="25385" LastActivityDate="2021-03-23T10:45:09.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26709" PostTypeId="2" ParentId="24669" CreationDate="2021-03-23T17:29:56.553" Score="0" Body="&lt;p&gt;I've had exactly the same question and I don't really understand the purpose why that user appears. But I just simply deleted it from the user accounts (hit the &amp;quot;-&amp;quot; button in left bottom corner).&#xA;The user is totally deleted - however I checked if that doesn't impact my virtualization after that : everything is OK (I'm using VMware workstation and GNS3).&#xA;Stupidly I didn't check some other possibilities (such as checking login shell, cf. &lt;a href=&quot;https://askubuntu.com/a/906997/1148936&quot;&gt;https://askubuntu.com/a/906997/1148936&lt;/a&gt; or &lt;a href=&quot;https://askubuntu.com/a/940069/1148936&quot;&gt;https://askubuntu.com/a/940069/1148936&lt;/a&gt;) - which seems to be the preferred way to get rid of that.&lt;/p&gt;&#xA;" OwnerUserId="24326" LastEditorUserId="24326" LastEditDate="2021-03-23T17:36:05.630" LastActivityDate="2021-03-23T17:36:05.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26711" PostTypeId="2" ParentId="490" CreationDate="2021-03-23T21:16:01.907" Score="0" Body="&lt;p&gt;Open your terminal on &lt;strong&gt;Elementary OS&lt;/strong&gt; and execute the following command:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.terminal.settings cursor-shape 'I-Beam'&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="25388" LastActivityDate="2021-03-23T21:16:01.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26713" PostTypeId="2" ParentId="26556" CreationDate="2021-03-24T12:28:32.720" Score="0" Body="&lt;p&gt;The comment by @KGIII helped me move along in the right direction. I am thankful for the help. It seems that the hanging problem was due to the &amp;quot;cryptsetup&amp;quot; package failing on dependencies. Very strange that AppCenter and its associated processes did not have permissions to overwrite files. I was required to use the &amp;quot;--force-overwrite&amp;quot; option and used &amp;quot;dpkg&amp;quot; to manually fix the issue. Of course, all of this was done by dropping to the command prompt to be able to view the messages. Perhaps they were also written to a log but I did not check.&lt;/p&gt;&#xA;" OwnerUserId="5199" LastActivityDate="2021-03-24T12:28:32.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26717" PostTypeId="1" CreationDate="2021-03-26T10:10:29.153" Score="1" ViewCount="34" Body="&lt;p&gt;Hello guys before diving into uknown space, is anybody got dome experience with elementary on Ryzen 5600x CPU ?&lt;/p&gt;&#xA;&lt;p&gt;Thanks:-)&lt;/p&gt;&#xA;" OwnerUserId="25411" LastActivityDate="2021-03-26T10:10:29.153" Title="Is it possible to install elementaryOS on ryzen 5600x (+nvdia gpu)" Tags="|elementary-project|ryzen|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="26718" PostTypeId="1" CreationDate="2021-03-26T11:41:54.507" Score="0" ViewCount="205" Body="&lt;p&gt;i have switched from Ubuntu to ElementaryOS, which means Shotwell has been replaced by Photos (ie: pantheon-photos).&lt;/p&gt;&#xA;&lt;p&gt;I don't want to install Shotwell on ElementaryOS, as that would go agains the idea of simplifying and using ElementaryOS's native apps, and, simply, Photos is the continuation of Shotwell.&lt;/p&gt;&#xA;&lt;p&gt;In order to migrate my Shotwell-managed photos to Photos, what do I need to do?&#xA;Are there any other steps beyond copying the Shotwell database located at &lt;code&gt;~/.local/share/shotwell/data/photo.db&lt;/code&gt; in my old Ubuntu home directory to &lt;code&gt;~/.local/share/io.elementary.photos/data/photo.db&lt;/code&gt; in my new ElementaryOS home directory and then starting up Photos?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="25412" LastActivityDate="2023-12-25T23:09:56.260" Title="Proper way of migrating from Shotwell to Photos?" Tags="|photos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="26719" PostTypeId="1" CreationDate="2021-03-26T14:42:34.343" Score="0" ViewCount="172" Body="&lt;p&gt;I just got a new Intel Tiger Lake laptop with the 1135G7 cpu and the latest Odin ISO does not boot - it appears to go to black screen with non responsive keyboard - cannot switch to TTY etc.&lt;/p&gt;&#xA;&lt;p&gt;Tried some kernel boot parameters like nomodeset, i915.modeset=0 which dont seem to help.&lt;/p&gt;&#xA;&lt;p&gt;Now, the latest current ISO has kernel 5.8 which is supposed to work - indeed Ubuntu 20.04 with kernel 5.4 and ubuntu 20.10 with kernel 5.8 work well - heck even Hera boots.&lt;/p&gt;&#xA;&lt;p&gt;Any pointers to get it to work?&lt;/p&gt;&#xA;" OwnerUserId="4977" LastActivityDate="2021-03-26T14:42:34.343" Title="Odin 6.0 not booting on Intel Tiger Lake laptop" Tags="|laptop|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="26722" PostTypeId="1" CreationDate="2021-03-27T00:25:08.393" Score="0" ViewCount="19" Body="&lt;p&gt;when using set-wallpaper (/usr/lib/x86_64-linux-gnu/io.elementary.contract.set-wallpaper) as sudo, it tries to recursively delete everything starting from the directory where the file is located, and only stops (thankfully) because i have a non-empty dir in the same dir as the wallpaper. Running as current user works fine.&lt;/p&gt;&#xA;" OwnerUserId="25414" LastActivityDate="2021-03-27T00:25:08.393" Title="set-wallpaper contract" Tags="|wallpaper|contract|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27726" PostTypeId="1" CreationDate="2021-03-28T14:42:25.883" Score="0" ViewCount="141" Body="&lt;p&gt;The short, technical version: upon initial installation of Elementary 5.1.7 onto a Lenovo Flex 5 AMD Ryzen 4700U I am unable to connect to wifi. The Network settings read “Wireless Is Disabled” despite wifi being switched “on.” I was not able to connect to Wifi while installing from USB (as some users I’ve found via googling have mentioned). The wifi card in this machine is a Realtek 8822CE Wireless LAN 802.11ac PCI-E NIC.&#xA;Looking around I’ve found something that has worked for someone else with the card here -&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1180714/realtek-rtl8822ce-is-unable-to-detect-wifi-networks&quot;&gt;https://askubuntu.com/questions/1180714/realtek-rtl8822ce-is-unable-to-detect-wifi-networks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I’ve opened terminal and typed in “dmesg” and the diagnostic stuff that comes up pulls the error that that user was getting. However, the command that fixes things for them -&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;wget &lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.178.3_all.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.178.3_all.deb&lt;/a&gt;&#xA;sudo dpkg -i linux*.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I don’t think I can use because I’m not connected to the internet. Moving over to the windows partition I’ve gone to download that firmware pack but it doesn’t look like it’s hosted there anymore. Is rtw8822c_fw.bin something I will be able to get from a later Linux firmware package from the same source? If I download another package, bring it over to my Elemetary side, navigate in terminal to the folder it’s in and enter the&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo dpkg -i linux*.deb&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;command, will that... fix.... the wifi?&lt;/p&gt;&#xA;&lt;p&gt;As you might have guessed, I’m basically completely new to Linux (tried to use Red Hat for a month back in high school uhhh 19 years ago) and wanted to give Elementary a try. Thank you in advance for your patience!&lt;/p&gt;&#xA;" OwnerUserId="25427" LastEditorUserId="25427" LastEditDate="2021-03-28T15:06:03.027" LastActivityDate="2023-12-19T08:02:50.327" Title="No WIFI on Initial Installation - VERY Novice User" Tags="|wifi|lenovo|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27728" PostTypeId="2" ParentId="27726" CreationDate="2021-03-28T15:45:22.207" Score="0" Body="&lt;p&gt;I was sitting around refreshing this page waiting for an answer and then I was just like well why don’t I just go ahead and try the possible solution I mapped out? So I downloaded a newer firmware from that location, fired up Elementary, opened terminal, navigated to a folder where I had placed the .deb file* and then entered the sudo command. Something... happened, which looked promising. I rebooted and wifi worked!&#xA;Just answering this in case another novice user has this problem, or so that someone who knows that they’re doing can come on and scold me for doing something silly!&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This is probably not necessary context for most users of this forum but as a terminal newbie I’m always confused when people are just like “enter &lt;em&gt;whatever&lt;/em&gt;”&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="25427" LastActivityDate="2021-03-28T15:45:22.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27731" PostTypeId="1" CreationDate="2021-03-29T16:38:16.520" Score="0" ViewCount="72" Body="&lt;p&gt;I am experiencing the dreaded &amp;quot;wake from suspend&amp;quot; issues that seem endemic to Linux and laptops, and am basically going through a long list of different solutions googling has gotten me to see if they work. One such solution is to downgrade my kernel to a previous version in GRUB and see if that works. I'm currently running 5.4.0-70-generic and Grub gives me the option of booting into 5.4.0-42-generic, which doesn't change the issue; I'd like to download the last several supported kernels and basically just boot into them one after another and see if any of them fix it.&#xA;Is there a list somewhere/source of the previous ubuntu kernels that are still supported by elementary?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="25427" LastActivityDate="2023-12-16T22:04:50.590" Title="Is there a list/source of stable kernels?" Tags="|suspend|kernel|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27733" PostTypeId="1" CreationDate="2021-03-30T15:34:26.930" Score="0" ViewCount="112" Body="&lt;p&gt;i have a audio problem on elementary os. when im listening music (music app, youtube etc.) it &amp;quot;lags&amp;quot; everytime in random situations for a half second. maybe every 2 minutes. Itś a fresh installation of elementary. hope you can understand, my english is not that good. thank you!&lt;/p&gt;&#xA;" OwnerUserId="25442" LastActivityDate="2023-12-17T00:08:15.990" Title="Audio and Video lags on Elementary OS (Music App, YouTube etc.)" Tags="|audio|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27736" PostTypeId="2" ParentId="27731" CreationDate="2021-03-31T13:54:25.883" Score="0" Body="&lt;p&gt;Mark,&lt;/p&gt;&#xA;&lt;p&gt;I was experiencing the same issue on my PC (not on laptop). I fixed it but I did not downgrade kernel. What I did I changed some settings on my motherboard (MSI X570)&lt;/p&gt;&#xA;&lt;p&gt;MSI motherboard has two nice settings:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;strong&gt;UEFI HDD BBS Prioretise&lt;/strong&gt;: I set default to Ubuntu (previously was Windows 10) (I have both systems on my PC)&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Advanced / Wake Up event setup&lt;/strong&gt;: I set to BIOS and enabled: &lt;strong&gt;Resume by UBS&lt;/strong&gt;, &lt;strong&gt;Resume by Keyboard&lt;/strong&gt;, &lt;strong&gt;Resume by Mouse&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;But before that - when I tried to wake up my system after suspending I was pressing &lt;code&gt;CTRL+ALT+F1&lt;/code&gt; and then &lt;code&gt;CTRL+ALT+F7&lt;/code&gt; few times and it mostly gave me positive results. I was able to start working and I was not forced to restart system.&lt;/p&gt;&#xA;&lt;p&gt;Now, when I want to suspend Elementary OS I press a &lt;code&gt;FN+F12&lt;/code&gt; (FN = function key) and to wake up I press just a &lt;code&gt;PrintScreen&lt;/code&gt; key&lt;/p&gt;&#xA;" OwnerUserId="24784" LastEditorUserId="24784" LastEditDate="2021-03-31T13:59:47.317" LastActivityDate="2021-03-31T13:59:47.317" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27737" PostTypeId="2" ParentId="27733" CreationDate="2021-03-31T14:09:52.217" Score="0" Body="&lt;p&gt;Do you use Epiphany web browser to watch youtube videos? If yes, try to install Chromium or Opera (from Snap Store) and check once again. On Epiphany I have the same issues.&lt;/p&gt;&#xA;" OwnerUserId="24784" LastActivityDate="2021-03-31T14:09:52.217" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27738" PostTypeId="2" ParentId="2538" CreationDate="2021-04-01T11:06:46.167" Score="0" Body="&lt;p&gt;This video clearly shows how to do this on Mac OS&#xA;&lt;a href=&quot;https://youtu.be/uT5F_OxrMy8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/uT5F_OxrMy8&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25471" LastActivityDate="2021-04-01T11:06:46.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27741" PostTypeId="2" ParentId="27726" CreationDate="2021-04-02T20:05:57.423" Score="0" Body="&lt;p&gt;Welcome. I think your issue will resolve follow these site:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;CODE LINES YOU HAVE TO EXECUTE IN TERMINAL: &lt;a href=&quot;https://medium.com/@kimiyukiyukawa/installing-rtl8821ce-network-controller-on-ubuntu-335d8ccb8a92&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://medium.com/@kimiyukiyukawa/installing-rtl8821ce-network-controller-on-ubuntu-335d8ccb8a92&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;BR&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;REPOSITORY (IF YOU WANT TO TAKE A LOOK BECAUSE YOU HAVE A LENOVO LAPTOP): &lt;a href=&quot;https://github.com/tomaspinho/rtl8821ce&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/tomaspinho/rtl8821ce&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;In my case, to execute the code in terminal, I connected my cellphone with USB cable and shared internet connection.&lt;/p&gt;&#xA;&lt;p&gt;regards and happy Elementary experience&lt;/p&gt;&#xA;" OwnerUserId="25476" LastActivityDate="2021-04-02T20:05:57.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27743" PostTypeId="1" CreationDate="2021-04-02T21:18:12.680" Score="0" ViewCount="251" Body="&lt;p&gt;I prepared my Live USB-Stick with different software. I created a bootable device with rufus on windows, dd on linux and unetbootin on linux. I also used different USB sticks, but the following problem remains the same. I used the latest officially available iso image of elementary OS and downloaded it a few times, so a damaged image might not be the problem.&lt;/p&gt;&#xA;&lt;p&gt;If I boot the USB stick, the first image appears. I can choose boot elementary and press Enter. After that there doesn't appear anything readable. Just lines of pixels. (I took a picture of that)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/zPFji.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zPFji.jpg&quot; alt=&quot;Thats the problem&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The OS does not seem to boot. Furthermore nothing happens if I press any keys or so. The image is not totaly static. Firstly just one line appears and then a few more appear. Like in the bootsequence you are used to. But it's not readable and the boot operation seems to freeze. If I pull the stick out nothing changes. I have to hard reset my machine with the power button.&lt;/p&gt;&#xA;&lt;p&gt;It's definitly not a problem of my hardware, because I already have windows and linux installed and it works perfectly.&#xA;My specs are the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;                                          OS: Pop!_OS 20.10 x86_64 &#xA;    //////7676767676*//////////////       Host: private&#xA;   /////76767//7676767//////////////      Kernel: 5.11.0-7612-generic &#xA;  /////767676///*76767///////////////     Uptime: 12 mins &#xA; ///////767676///76767.///7676*///////    Packages: 3428 (dpkg), 47 (flatpak),  &#xA;/////////767676//76767///767676////////   Shell: zsh 5.8 &#xA;//////////76767676767////76767/////////   Resolution: 1920x1080, 2560x1440 &#xA;///////////76767676//////7676//////////   DE: GNOME 3.38.3 &#xA;////////////,7676,///////767///////////   WM: Mutter &#xA;/////////////*7676///////76////////////   WM Theme: Pop &#xA;///////////////7676////////////////////   Theme: Adwaita-dark [GTK2/3] &#xA; ///////////////7676///767////////////    Icons: Pop [GTK2/3] &#xA;  //////////////////////'////////////     Terminal: tilix &#xA;   //////.7676767676767676767,//////      CPU: AMD Ryzen 5 2600X (12) @ 3.600GH &#xA;    /////767676767676767676767/////       GPU: NVIDIA GeForce RTX 2060 SUPER &#xA;      ///////////////////////////         Memory: 2297MiB / 16016MiB &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25478" LastActivityDate="2024-03-08T03:06:55.823" Title="Problem booting elementary OS from live USB stick" Tags="|release-hera|system-installation|boot|usb|live-installation|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27748" PostTypeId="1" CreationDate="2021-04-04T18:44:52.310" Score="1" ViewCount="139" Body="&lt;p&gt;I wanted to dual boot elementary and macOS Big Sur but kept running into issues with out dated tutorials. After a bit of poking around, I was able to figure it out and have it posted on medium if anyone else needs it&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://taurealis.medium.com/how-to-dual-boot-elementary-os-and-macos-big-sur-and-make-uninstalling-easy-a7b9d3b0e59c&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://taurealis.medium.com/how-to-dual-boot-elementary-os-and-macos-big-sur-and-make-uninstalling-easy-a7b9d3b0e59c&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25486" LastActivityDate="2021-04-04T18:44:52.310" Title="eOS and macOS Big Sur dual boot" Tags="|macbook|macintosh|apple|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27749" PostTypeId="1" CreationDate="2021-04-04T19:28:57.077" Score="0" ViewCount="42" Body="&lt;p&gt;My Dell Inspiron laptop goes to sleep too soon for me - how do I alter that in Elementary Hera? I am unable to find any clues in this library.&lt;/p&gt;&#xA;" OwnerUserId="14362" LastActivityDate="2023-12-21T01:06:35.777" Title="Alter sleep settings" Tags="|settings|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27750" PostTypeId="2" ParentId="27749" CreationDate="2021-04-04T19:36:12.760" Score="0" Body="&lt;p&gt;Go to Applications/System Tools/System Settings/Power. Suspend settings are in there - authenticate to change these as required.&lt;/p&gt;&#xA;" OwnerUserId="14362" LastActivityDate="2021-04-04T19:36:12.760" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27752" PostTypeId="1" CreationDate="2021-04-05T17:11:21.973" Score="0" ViewCount="156" Body="&lt;p&gt;After installing the OS, removing the USB, and pressing Enter to reboot, it shows a black screen with the text:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;quot;Failed to set MoKListRT: Invalid Parameter&#xA;Could not create MoKListRT: -Invalid Parameter&#xA;Importing MOK states has failed: import_mok_state()C: Invalid Parameter&#xA;Continuing boot since secure mode is disable&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I solve this issue?&lt;/p&gt;&#xA;" OwnerUserId="25492" LastEditorUserId="3018" LastEditDate="2021-05-29T13:58:10.503" LastActivityDate="2024-02-18T15:05:25.707" Title="Elementary OS 5.1.7 Hera &quot;Failed to set MoKListRT:" Tags="|release-hera|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27753" PostTypeId="1" CreationDate="2021-04-05T18:04:34.473" Score="0" ViewCount="108" Body="&lt;p&gt;My Bluetooth used to work fine, and now it doesn't...&#xA;Trouble is the following :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Turning on BT from icon located on top of the screen --&amp;gt; ICON stays &amp;quot;off&amp;quot; after hiding the menu BT isn't working of course.&lt;/li&gt;&#xA;&lt;li&gt;Turning on BT from settings --&amp;gt; just stays on &amp;quot;discovering...&amp;quot; forever, Bluetooth isn't working of course.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qZhCg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qZhCg.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt; &lt;a href=&quot;https://i.stack.imgur.com/haRBC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/haRBC.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I updated the system via app center and it worked for a day or two but then again it failed (and kept on failing to this day).&lt;/p&gt;&#xA;&lt;p&gt;This is really bothering as I can't have sound on my laptop (I work in an open space)...&lt;/p&gt;&#xA;&lt;p&gt;Any help will be appreciated !&lt;/p&gt;&#xA;&lt;p&gt;Simon from France&lt;/p&gt;&#xA;" OwnerUserId="25494" LastActivityDate="2023-12-22T15:01:15.167" Title="elementary OS 5.1.7 HERA Bluetooth not working (Software trouble)" Tags="|release-hera|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27754" PostTypeId="2" ParentId="27753" CreationDate="2021-04-06T09:40:38.807" Score="0" Body="&lt;p&gt;I have a kind of similar issue with Bluetooth, When I connect my wireless buds to via Bluetooth and after 5-10 min it automatically gets disconnected.To connect it back I have to again disconnect and reconnect it and It's so annoying.&lt;/p&gt;&#xA;" OwnerUserId="25498" LastActivityDate="2021-04-06T09:40:38.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27761" PostTypeId="1" AcceptedAnswerId="27783" CreationDate="2021-04-07T12:56:05.020" Score="2" ViewCount="966" Body="&lt;p&gt;How can I remove this repo(&lt;code&gt;https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/hera&lt;/code&gt;) from the system?&lt;/p&gt;&#xA;&lt;p&gt;I get this error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done                                &#xA;The repository 'https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/hera pgadmin4 Release' does not have a Release file.&#xA;Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have tried doing like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r ppa:https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/hera/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;its not working at all&lt;/p&gt;&#xA;" OwnerUserId="20508" LastActivityDate="2021-05-12T16:03:20.297" Title="The repository 'https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/hera pgadmin4 Release' does not have a Release file" Tags="|ppa|repositories|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27762" PostTypeId="1" CreationDate="2021-04-07T17:31:29.180" Score="0" ViewCount="356" Body="&lt;p&gt;Is Flatpak manifest file still needed for new apps?&lt;/p&gt;&#xA;&lt;p&gt;I read about it here: &lt;a href=&quot;https://docs.elementary.io/develop/writing-apps/our-first-app/packaging&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.elementary.io/develop/writing-apps/our-first-app/packaging&lt;/a&gt; but I also checked some Elementry OS apps sources on github and I found .travis.yml file only.&lt;/p&gt;&#xA;" OwnerUserId="24784" LastActivityDate="2023-12-25T22:08:46.160" Title="Flatpak manifest for new apps?" Tags="|release-hera|development|elementary-website|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27764" PostTypeId="2" ParentId="27762" CreationDate="2021-04-08T06:24:07.503" Score="0" Body="&lt;p&gt;I found that Flatpak manifest for Elementary OS apps is a new thing.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.youtube.com/watch?v=UDDG0BSAdPo&amp;amp;ab_channel=elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=UDDG0BSAdPo&amp;amp;ab_channel=elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24784" LastEditorUserId="24784" LastEditDate="2021-04-09T08:18:27.823" LastActivityDate="2021-04-09T08:18:27.823" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27765" PostTypeId="2" ParentId="27762" CreationDate="2021-04-08T15:36:47.277" Score="0" Body="&lt;p&gt;Are you really sure to use Flatpak in Elementary OS? Flatpak is full of issues.&lt;/p&gt;&#xA;&lt;p&gt;From my com.github.slawtul.hamster.yml file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;runtime: org.gnome.Platform&#xA;runtime-version: '3.38'&#xA;sdk: org.gnome.Sdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I run command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak-builder build  com.github.slawtul.hamster.yml --user --install --force-clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Result:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;error: org.gnome.Sdk/x86_64/3.38 not installed&#xA;Failed to init: Unable to find sdk org.gnome.Sdk version 3.38&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I run manually command and press &lt;code&gt;9&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install org.gnome.Sdk 3.38&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Result:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Looking for matches…&#xA;Found similar ref(s) for ‘org.gnome.Sdk’ in remote ‘flathub’ (system).&#xA;Use this remote? [Y/n]: Y&#xA;Similar refs found for ‘org.gnome.Sdk’ in remote ‘flathub’ (system):&#xA;&#xA;   1) runtime/org.gnome.Sdk/x86_64/40&#xA;   2) runtime/org.gnome.Sdk/x86_64/3.24&#xA;   3) runtime/org.gnome.Sdk/x86_64/3.26&#xA;   4) runtime/org.gnome.Sdk/x86_64/3.28&#xA;   5) runtime/org.gnome.Sdk/x86_64/3.30&#xA;   6) runtime/org.gnome.Sdk/x86_64/3.32&#xA;   7) runtime/org.gnome.Sdk/x86_64/3.34&#xA;   8) runtime/org.gnome.Sdk/x86_64/3.36&#xA;   9) runtime/org.gnome.Sdk/x86_64/3.38&#xA;&#xA;Which do you want to use (0 to abort)? [0-9]: 9&#xA;error: Nothing matches 3.38 in remote flathub&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So even if flatpak informs me it found ref when I press number I get an error &amp;quot;Nothing matches&amp;quot; :)&lt;/p&gt;&#xA;&lt;p&gt;Only this works (two slashes):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install org.gnome.Sdk//3.38&#xA;&#xA;Looking for matches…&#xA;Found similar ref(s) for ‘org.gnome.Sdk//3.38’ in remote ‘flathub’ (system).&#xA;Use this remote? [Y/n]: Y&#xA;&#xA;&#xA;        ID                                             Branch            Op           Remote            Download&#xA; 1. [✓] org.freedesktop.Platform.GL.default            20.08             i            flathub            95,3 MB / 96,0 MB&#xA; 2. [✓] org.freedesktop.Platform.openh264              2.0               i            flathub             1,5 MB / 1,5 MB&#xA; 3. [✓] org.gnome.Sdk.Locale                           3.38              i            flathub             4,6 MB / 330,7 MB&#xA; 4. [✓] org.gtk.Gtk3theme.elementary                   3.22              i            flathub            75,8 kB / 1,3 MB&#xA; 5. [✓] org.gnome.Sdk                                  3.38              i            flathub           569,2 MB / 641,9 MB&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Of course running below command still gives an error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak-builder build  com.github.slawtul.hamster.yml --user --install --force-clean&#xA;&#xA;error: org.gnome.Platform/x86_64/3.38 not installed&#xA;Failed to init: Unable to find runtime org.gnome.Platform version 3.38&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So this is not a good start.&lt;/p&gt;&#xA;&lt;p&gt;Any help?&lt;/p&gt;&#xA;&lt;p&gt;Flatpak 1.8.3 version&lt;/p&gt;&#xA;" OwnerUserId="24784" LastActivityDate="2021-04-08T15:36:47.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27767" PostTypeId="2" ParentId="26718" CreationDate="2021-04-09T15:59:29.243" Score="0" Body="&lt;p&gt;In light of the lack of answer, i eventually went ahead and tried the solution described in my question.&#xA;It appears to work fine: copying the Shotwell database located at &lt;code&gt;~/.local/share/shotwell/data/photo.db&lt;/code&gt; in the old home directory to &lt;code&gt;~/.local/share/io.elementary.photos/data/photo.db&lt;/code&gt; in the new ElementaryOS home directory and then starting up Elementary Photos results in Elementary Photos finding the pictures, events, tags, etc..&lt;/p&gt;&#xA;&lt;p&gt;You just want to make sure you start Elementary Photos a first time before doing the database copy step described above and change the settings to adjust where Elementary Photos should import pictures and whether it should automatically import pictures, in case you want to avoid adding pictures to your library that shouldn't be there. By default, Elementary Photos will scan and add everything located in your user's Pictures directory (&lt;code&gt;~/Pictures&lt;/code&gt;).&lt;/p&gt;&#xA;" OwnerUserId="25412" LastActivityDate="2021-04-09T15:59:29.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27770" PostTypeId="2" ParentId="27761" CreationDate="2021-04-10T05:44:55.617" Score="0" Body="&lt;p&gt;Have you tried going to the files app and entering this directory '/etc/apt/sources.list.d' to find your repo? From what I've seen in other distros yours should be there.&lt;/p&gt;&#xA;" OwnerUserId="25544" LastActivityDate="2021-04-10T05:44:55.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27771" PostTypeId="2" ParentId="25527" CreationDate="2021-04-10T12:53:51.250" Score="-1" Body="&lt;p&gt;@msallehi&#xA;I tried to follow the instructions and there seems to be some error with the links above (space between /Everything/ and aarch64).&lt;/p&gt;&#xA;&lt;p&gt;In any case I got to the point where you convert from rpm to deb and it failed. See steps I took.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo wget https://download1.rpmfusion.org/nonfree/fedora/development/rawhide/Everything/aarch64/os/Packages/r/r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm&#xA;&#xA;sudo add-apt-repository universe&#xA;&#xA;sudo apt-get install alien&#xA;&#xA;sudo alien r5u87x-firmware-0.2.0-15.a9b2171d762b.fc33.aarch64.rpm&#xA;&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;warning: r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm: Header V3 RSA/SHA1 Signature, key ID 94843c65: NOKEY&#xA;r5u87x-firmware-0.2.0-16.a9b2171d762b.fc34.aarch64.rpm is for architecture aarch64 ; the package cannot be built on this system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now I am stuck. Seems that the Kubuntu version I am using doesn't like it...&lt;/p&gt;&#xA;&lt;p&gt;any help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="25546" LastEditorUserId="26" LastEditDate="2021-04-11T22:44:54.283" LastActivityDate="2021-04-11T22:44:54.283" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27774" PostTypeId="2" ParentId="26693" CreationDate="2021-04-10T19:06:49.900" Score="1" Body="&lt;p&gt;At this point, it is unknown whether installation of version 6 will require a full re-install when it is released. Keep an eye on the &lt;a href=&quot;https://blog.elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary Blog&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20825" LastActivityDate="2021-04-10T19:06:49.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27779" PostTypeId="1" CreationDate="2021-04-12T04:23:46.327" Score="1" ViewCount="15" Body="&lt;p&gt;Today i started using Linux for the first time in my life and im struggling a lot honestly... so after a while i discovered that running this command:&lt;/p&gt;&#xA;&lt;p&gt;'sudo /opt/lampp/manager-linux-x64.run'&lt;/p&gt;&#xA;&lt;p&gt;I can run the xampp control panel&lt;/p&gt;&#xA;&lt;p&gt;Now I want to make an &amp;quot;app&amp;quot; that runs this exact command but it is not working for some reason.&lt;/p&gt;&#xA;&lt;p&gt;Someone knows what could be wrong?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E8U9G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E8U9G.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25580" LastActivityDate="2021-04-12T04:23:46.327" Title="Make an APP that runs a code" Tags="|applications|" AnswerCount="0" CommentCount="1" ClosedDate="2021-04-15T18:05:13.090" ContentLicense="CC BY-SA 4.0" />
  <row Id="27781" PostTypeId="2" ParentId="26673" CreationDate="2021-04-12T13:19:12.180" Score="0" Body="&lt;p&gt;Just search for Wine on the App Manager that comes default with Elementary OS&lt;/p&gt;&#xA;" OwnerUserId="25584" LastActivityDate="2021-04-12T13:19:12.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27782" PostTypeId="2" ParentId="26673" CreationDate="2021-04-12T15:23:15.790" Score="1" Body="&lt;p&gt;Replace &lt;code&gt;bionic&lt;/code&gt; codename with &lt;code&gt;focal&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository -r 'deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main'&#xA;sudo add-apt-repository 'deb https://dl.winehq.org/wine-builds/ubuntu/ focal main'&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2021-04-12T15:23:15.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27783" PostTypeId="2" ParentId="27761" CreationDate="2021-04-12T15:34:12.333" Score="1" Body="&lt;p&gt;To list the supported codenames for postgresql repository, use the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl -SsL https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/ |awk -F'&amp;quot;' 'FNR &amp;gt;2 {print $2}'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;sample output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bionic/&#xA;bullseye/&#xA;buster/&#xA;disco/&#xA;eoan/&#xA;focal/&#xA;groovy/&#xA;stretch/&#xA;xenial/&#xA;README&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;As you can see &lt;code&gt;hera&lt;/code&gt; isn't listed, it is not a valid codename. Use &lt;code&gt;bionic&lt;/code&gt; codename instead:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo curl https://www.pgadmin.org/static/packages_pgadmin_org.pub | sudo apt-key add&#xA;sudo sh -c 'echo &amp;quot;deb https://ftp.postgresql.org/pub/pgadmin/pgadmin4/apt/bionic pgadmin4 main&amp;quot; &amp;gt; /etc/apt/sources.list.d/pgadmin4.list'&#xA;sudo  apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2021-04-12T15:34:12.333" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27784" PostTypeId="1" CreationDate="2021-04-12T17:25:00.990" Score="0" ViewCount="825" Body="&lt;p&gt;I'm a new user of elementary and don't know anything about linux (I wanted to use an other system than windows bcause it wiped a partition and corrupted my hard drive during an update). So I just follow little tutorials from the ubuntu community without asking too many questions, but i ran into an issue (and it's completly my fault, sorry).&lt;/p&gt;&#xA;&lt;p&gt;I wanted to change the theme to a dark theme and discovered tweaks. Then I installed it (&lt;a href=&quot;https://techsphinx.com/linux/install-elementary-tweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://techsphinx.com/linux/install-elementary-tweaks/&lt;/a&gt;)&#xA;And on the gnome looks website I downloaded a macOS theme to match the OS.&#xA;Everything worked fine, so I thought &amp;quot;let's install an icon pack&amp;quot; (very bad idea for a non experimented guy like me).&lt;/p&gt;&#xA;&lt;p&gt;I googled how to install an icon pack and it says to extract the pack in to /usr/share/icons/&#xA;and to select it in the settings, but when I had done that every icon disapeared and the settings won't open, I can't delete the pack: I tried &amp;quot;sudo rmdir /usr/share/icons/McMojave-circle-black-dark&amp;quot; and the terminal says rmdir: impossible de supprimer 'McMojave-circle-black-dark/': Le dossier n'est pas vide, it's obviously in frensh because my system is in frensh and says something like &amp;quot;rmdir: impossible to remove 'McMojave-circle-black-dark/': The folder is not empty&amp;quot; I know that it's not empty, that is the reason why i want to remove it !!!&lt;/p&gt;&#xA;&lt;p&gt;Thank you for any help.&lt;/p&gt;&#xA;" OwnerUserId="25585" LastActivityDate="2021-07-16T06:44:39.983" Title="Icons not showing up properly and settings not opening (using tweaks)" Tags="|settings|tweak-tool|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27785" PostTypeId="1" CreationDate="2021-04-12T19:49:38.240" Score="0" ViewCount="57" Body="&lt;p&gt;elementary OS 5.1 Hera&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Issue in a Nutshell:&lt;/strong&gt;&#xA;The disk space for elementary OS seems to have recently ballooned significantly. I have elementary OS on a ~105GB partition. Recently, I saw the Files app reported that the File System was using a staggering 86.1GB.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What I Tried&lt;/strong&gt;&#xA;Manually going through the folders from root to try to identify where the sudden disk usage was.&#xA;Then I tried:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /&#xA;sudo du -h --max-depth=1 --exclude=media --exclude=run --exclude=proc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The dh report shows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;16M ./bin&#xA;1.5G    ./var&#xA;4.7G    ./usr&#xA;4.0K    ./srv&#xA;16K ./lost+found&#xA;24M ./onedrive&#xA;709M    ./snap&#xA;11G ./home&#xA;272K    ./opt&#xA;4.0K    ./lib64&#xA;170M    ./boot&#xA;0   ./dev&#xA;4.0K    ./cdrom&#xA;0   ./sys&#xA;977M    ./lib&#xA;5.8M    ./lib32&#xA;17M ./sbin&#xA;604K    ./root&#xA;4.0K    ./mnt&#xA;20M ./etc&#xA;132K    ./tmp&#xA;21G .&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am puzzled by the reported 21GB in root. I see no files in root (&lt;code&gt;ls -la&lt;/code&gt;) anywhere near that size (there is a unused 2GB swapfile).&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Questions&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;What does the 21GB mean in the dh report?&lt;/li&gt;&#xA;&lt;li&gt;Why would there be a mysterious 21GB chunk?&lt;/li&gt;&#xA;&lt;li&gt;Is there a standard reason why elementary OS would be ballooning like this? I am almost out of space.&lt;/li&gt;&#xA;&lt;li&gt;The home directory at 11GB seems to be primarily in the &lt;code&gt;/home/me/.local&lt;/code&gt; directory. I use very very very little actual space in /home for documents etc. (Most of the data is stored on a separate server partition.)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I installed elementary OS 5.1 Hera about three months ago and use it normally (plain vanilla install). I minimize apps installed to core apps.&lt;/p&gt;&#xA;" OwnerUserId="12058" LastActivityDate="2021-04-13T14:58:55.640" Title="Freeing Space elementary OS 5.1 Ballooning Install" Tags="|disk-management|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27786" PostTypeId="2" ParentId="26581" CreationDate="2021-04-13T10:48:27.250" Score="0" Body="&lt;p&gt;Try to launch OS with &lt;code&gt;snd_hda_intel.dmic_detect=0&lt;/code&gt; option as described &lt;a href=&quot;https://askubuntu.com/questions/1225463/18-04-no-sound-intel-sound-card-snd-hda-intel-not-working&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-04-13T10:48:27.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27787" PostTypeId="1" AcceptedAnswerId="27799" CreationDate="2021-04-13T10:57:13.230" Score="0" ViewCount="53" Body="&lt;p&gt;&lt;code&gt;find /boot/v*&lt;/code&gt; gives me&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/boot/vmlinuz-4.15.0-141-generic&#xA;/boot/vmlinuz-5.4.0-70-generic&#xA;/boot/vmlinuz-5.4.0-71-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and the kernel in use is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;5.4.0-71-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am wondering, why I'm still getting updates for 4.15 branch too? Is it ok?&#xA;Also it's impossible to delete the kernel via &lt;code&gt;sudo dpkg --purge linux-image-4.15.0-141-generic&lt;/code&gt; due to dependencies.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-04-16T19:53:12.210" Title="both 4.15 and 5.4 kernels at the same time" Tags="|release-hera|kernel|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27788" PostTypeId="1" AcceptedAnswerId="27976" CreationDate="2021-04-13T14:39:15.977" Score="0" ViewCount="54" Body="&lt;p&gt;I made an install drive for Elementary OS (elementaryos-5.1-stable.20200814.iso), but when I restarted my pc, I couldn't select it as an option.  I was unable to get it to show using F1 and F12 keys either.&lt;/p&gt;&#xA;&lt;p&gt;I got a suggestion to wipe the usb drive and put Elementary OS back on it, but I'm unable to delete the files on the USB, which is a brand new san disk 32 gb w/nothing else on it.&lt;/p&gt;&#xA;&lt;p&gt;Other context&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;using the latest version of KDE Neon User Edition&lt;/li&gt;&#xA;&lt;li&gt;on a Lenovo Ideapad 3&lt;/li&gt;&#xA;&lt;li&gt;am trying to switch to Elementary OS&lt;/li&gt;&#xA;&lt;li&gt;I'm very new to linux and any help is greatly appreciate!&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-05-25T01:39:23.640" Title="Elementary OS install doesn't show up as an option on startup" Tags="|system-installation|boot|grub|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27789" PostTypeId="2" ParentId="27785" CreationDate="2021-04-13T14:58:55.640" Score="1" Body="&lt;p&gt;Thank you @Vlad and @KGill.&#xA;I used both techniques. The Disk Usage Analyzer is a handy visual means to find large directories. I did not know that elementary OS allows running File Manger as Administrator. I keep File Manger in the DOCK and a right-click on the icon offers the Run as Administrator option (never noticed that before, thanks).&lt;/p&gt;&#xA;&lt;p&gt;Using your suggestions, I was better able to identify the issue.&lt;/p&gt;&#xA;&lt;p&gt;Oddly, there was a ghost mount under &lt;code&gt;/media/{me}/{partition ID}&lt;/code&gt; to an external thumb USB drive. For some reason, a rsync a week or so ago somehow seems to have copied to that mount point but on the SSD partition because it appeared as if the files were physically copied to the / root drive. I know this sounds strange but that is why the install suddenly ballooned. The ghost mount point had about 52GB which made my install suddenly shoot from about 20GB to 80+GB.&lt;/p&gt;&#xA;&lt;p&gt;I analyzed this ghost mount point using &lt;code&gt;sudo blkid&lt;/code&gt; (no mount evident), checked &lt;code&gt;sudo nano /etc/mtab&lt;/code&gt; and &lt;code&gt;sudo nano /etc/fstab&lt;/code&gt; (no mount) and &lt;code&gt;fidisk -l&lt;/code&gt; (no mount). Also tried &lt;code&gt;umount (the ghost mount)&lt;/code&gt; and no mount.&lt;/p&gt;&#xA;&lt;p&gt;I copied the ghost mount to another external drive just in case and then forced a removal of the ghost mount point using &lt;code&gt;sudo -r /media/{me}/{the mount point partition ID}&lt;/code&gt; . This did indicate activity on the main SSD drive where the Linux partition lives so maybe there were files somehow on the SSD drive (not the original external USB now showing as a ghost) .&#xA;Using Disk Usage Analyzer and Files, both now show the install returned to about 20GB.&lt;/p&gt;&#xA;&lt;p&gt;Whew! Thanks to both of you for advice. I am still not sure why this occurred but I did run a &lt;code&gt;rsync&lt;/code&gt; to an external thumb drive last week. Maybe I messed that up somehow and it copied instead to the main SSD drive.&lt;/p&gt;&#xA;" OwnerUserId="12058" LastActivityDate="2021-04-13T14:58:55.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27793" PostTypeId="2" ParentId="16295" CreationDate="2021-04-14T20:58:43.530" Score="1" Body="&lt;p&gt;Worked for me like this&#xA;cd into&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;/etc/modprobe.d&#xA;edit the alsa.conf&#xA;&lt;code&gt;sudo nano alsa.conf&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;add the following line to the options section&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;options snd-hda-intel dmic_detect=0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;cd onto&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;/usr/share/alsa-base&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt;using sudo &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;./alsa-info.sh&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;the ** out of that file. and it updates. im sure you have already been installing all the software already. try it in reverse otherwise. and &lt;code&gt;LOGOUT&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="25597" LastActivityDate="2021-04-14T20:58:43.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27795" PostTypeId="2" ParentId="27787" CreationDate="2021-04-16T15:27:46.307" Score="0" Body="&lt;p&gt;Warning be very careful , these instructions may break your boot sequence&lt;/p&gt;&#xA;&lt;p&gt;maybe you have two boot partitions /dev/sda1 and /dev/sda2 if you want boot the new kernels run again  grub-install and update-grub .&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;grub-install /dev/sda&#xA;update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23468" LastActivityDate="2021-04-16T15:27:46.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27797" PostTypeId="1" CreationDate="2021-04-16T17:34:48.953" Score="0" ViewCount="23" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/66vSg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/66vSg.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This launcher had been working yesterday, but now it only shows a static clip of the background from where the window opened.&lt;/p&gt;&#xA;&lt;p&gt;For some reason, the background is painting on top of the content inside the window.&lt;/p&gt;&#xA;&lt;p&gt;I feel like this is part of opacity features??&lt;/p&gt;&#xA;&lt;p&gt;How can I get the background to stop painting inside the minecraft launcher window?&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2024-01-03T23:02:20.237" Title="Minecraft launcher started showing desktop paint buffers" Tags="|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27799" PostTypeId="2" ParentId="27787" CreationDate="2021-04-16T19:53:12.210" Score="0" Body="&lt;p&gt;The current state of things is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;arti@hp: find /boot/v*&#xA;/boot/vmlinuz-5.4.0-71-generic&#xA;/boot/vmlinuz-5.4.0-72-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This is what I did in order to achieve the desired result:&#xA;uninstalled 4.15 kernel, however upon uninstall I've got 4.15 &lt;code&gt;unsigned&lt;/code&gt; kernel, so I removed it too. In order to keep only 5+ version I removed the &lt;em&gt;linux-libc-dev&lt;/em&gt; repository via&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove linux-libc-dev&#xA;sudo apt-get purge linux-libc-dev&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-04-16T19:53:12.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27800" PostTypeId="2" ParentId="27788" CreationDate="2021-04-16T22:00:20.797" Score="0" Body="&lt;p&gt;The Internet is full of guides and tools for creating bootable USB drives. You could give Ventoy a try and see how it goes :) &lt;a href=&quot;https://www.ventoy.net/en/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.ventoy.net/en/index.html&lt;/a&gt;&#xA;Good luck!&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-04-16T22:00:20.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27801" PostTypeId="2" ParentId="27797" CreationDate="2021-04-17T00:09:36.633" Score="0" Body="&lt;p&gt;The first solution I found was to make sure the window started off in the top left corner of the screen.  But this quickly failed.  Then someone on reddit offered this solution:&lt;/p&gt;&#xA;&lt;p&gt;Go to:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;$ nano /usr/share/applications/minecraft-launcher.desktop&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;then edit:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;Exec=env GTK_CSD=0 minecraft-launcher&lt;/code&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Alternatively, running &lt;code&gt;$ env GTK_CSD=0 minecraft-launcher&lt;/code&gt; will also work&lt;/p&gt;&#xA;" OwnerUserId="13227" LastEditorUserId="13227" LastEditDate="2021-04-18T15:32:09.633" LastActivityDate="2021-04-18T15:32:09.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27804" PostTypeId="1" CreationDate="2021-04-18T13:48:49.477" Score="1" ViewCount="20" Body="&lt;p&gt;I'm fairly new to Linux and decided to try elementary as the first distro to main, however when trying to install it from an USB drive, I see the elementary logo for a few seconds during which there's options to press e for options and c for command line or enter to continue with the boot, and after that my monitor says unsupported resolution. My monitor is 1920x1080 and uses a VGA connection.&lt;/p&gt;&#xA;" OwnerUserId="25613" LastEditorUserId="25613" LastEditDate="2021-04-18T14:06:51.697" LastActivityDate="2021-04-18T14:06:51.697" Title="Monitor shows resolution unsupported when trying to install" Tags="|resolution|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27805" PostTypeId="1" CreationDate="2021-04-18T18:33:34.860" Score="0" ViewCount="1295" Body="&lt;p&gt;i've just installed elementary os on my laptop as my only os and i get no sond from the built-in speakers. But the sound works perfectly in my wireless earbuds. I think it's a problem of drivers because I've tried several linux distros on this laptop and all have the same issue. I am very new to linux so any help would be massively appreciated.&lt;/p&gt;&#xA;" OwnerUserId="25614" LastActivityDate="2021-04-18T18:33:34.860" Title="No sound from build-in speakers" Tags="|drivers|sound|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="27809" PostTypeId="1" CreationDate="2021-04-19T22:33:04.710" Score="0" ViewCount="222" Body="&lt;p&gt;Is there a way to correctly integrate synology drive client in Eos?&#xA;I can install .deb package from synology website, but unfortunately without folder/files status overlays and app indicator on system tray, working with the client it’s really difficult. Is there any plug-in availbale for the integration?&lt;/p&gt;&#xA;" OwnerUserId="25622" LastActivityDate="2024-01-08T17:02:35.310" Title="Synology Drive Client integration" Tags="|wingpanel|pantheon-files|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27822" PostTypeId="2" ParentId="27809" CreationDate="2021-04-23T11:44:08.953" Score="0" Body="&lt;p&gt;If the client were to support &lt;code&gt;libcloudproviders&lt;/code&gt; then Files in elementary 6.0 should support it.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-04-23T11:44:08.953" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27823" PostTypeId="1" CreationDate="2021-04-23T14:49:02.470" Score="1" ViewCount="73" Body="&lt;p&gt;I'm new to EOS.&#xA;Installed Hera on Huawei Matebook 14 AMD Ryzen 4800h and everything is ok (wifi included).&#xA;Second HP 27 inches display, connected to laptop via HDMI, is not detected.&#xA;I' ve searched far and wide on forum and Google, without success.&#xA;Please, can anyone help me?&#xA;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="25650" LastActivityDate="2021-04-24T04:19:59.567" Title="Hera dual monitor HDMI" Tags="|release-hera|hdmi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27824" PostTypeId="2" ParentId="27823" CreationDate="2021-04-24T04:19:59.567" Score="1" Body="&lt;p&gt;The Huawei MateBooks will sometimes not auto-extend a display. That said, you pay be able to trigger the function by pressing &lt;kbd&gt;F8&lt;/kbd&gt; (or &lt;kbd&gt;Fn&lt;/kbd&gt;+&lt;kbd&gt;F8&lt;/kbd&gt;) to trigger the BIOS toggle. Some models may also use &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;P&lt;/kbd&gt;.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-04-24T04:19:59.567" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27826" PostTypeId="1" AcceptedAnswerId="27855" CreationDate="2021-04-25T02:00:05.413" Score="0" ViewCount="78" Body="&lt;p&gt;I would like to resurrect Pantheon Files. It has crapped out in some manner I can't easily understand of deal with, and I don't know how to proceed.&lt;/p&gt;&#xA;&lt;p&gt;Was dragging files between Files tabs when it hung. Got one bonus relaunch and most files reappeared with green dots. Further attempts to launch showed only a hung interface, frozen at the same mid-draw point with spinners in both tabs, and I had to kill it to quit it. I have no idea what the green dots represent and found nothing online explaining colour codes.&lt;/p&gt;&#xA;&lt;p&gt;Command line full purge and AppCentre reinstall achieved, but now Files is &lt;em&gt;extremely&lt;/em&gt; slow to launch and items are still green dotted. Today I noticed some blank and one orange dot; icon associations seem fine. It really feels like it's still trying to figure something out, then presents a failed best guess.&lt;/p&gt;&#xA;&lt;p&gt;I have continued to use an alternative file manager without issue and the file system seems okay.&lt;/p&gt;&#xA;&lt;p&gt;I thought apt purge got rid of everything related to an application but it appears something is mangled and cached. I tried apt remove first but had the same outcome. Also, I didn't find any other pantheon processes to kill, except the daemon I assume I just reinstalled.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-05-01T07:01:07.707" Title="How to revive pantheon files? Hung, reinstalled, unresponsive" Tags="|release-hera|pantheon-files|" AnswerCount="1" CommentCount="14" ContentLicense="CC BY-SA 4.0" />
  <row Id="27827" PostTypeId="1" CreationDate="2021-04-25T10:19:18.397" Score="0" ViewCount="25" Body="&lt;p&gt;I am new with the os and I really like it. But I got a problem when working in the terminal when my VPN is active. For instance when I run the command sudo apt-get update on the terminal while my VPN is active it always produces connection failed status. But when I turn off my VPN the command runs and fineshes smoothly. Though it is not a big problem, it is just troublesome to switch off my VPN application every time I use my terminal.&lt;/p&gt;&#xA;" OwnerUserId="25656" LastActivityDate="2021-04-25T10:19:18.397" Title="Why I cannot work on my terminal when my VPN application is connected?" Tags="|pantheon-terminal|vpn|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27828" PostTypeId="1" CreationDate="2021-04-25T19:29:20.910" Score="0" ViewCount="350" Body="&lt;p&gt;iCloud Mail can no longer be accessed via GNOME Evolution:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://gitlab.gnome.org/GNOME/evolution/-/issues/1468&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.gnome.org/GNOME/evolution/-/issues/1468&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This has been patched for Fedora:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://copr.fedorainfracloud.org/coprs/mcrha/eds-icloud-mail/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://copr.fedorainfracloud.org/coprs/mcrha/eds-icloud-mail/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This has been reported for Ubuntu:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1925742&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/evolution-data-server/+bug/1925742&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Per the above:&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&amp;quot;We will include the fix in the next updates though&amp;quot;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;As it is unknown how long it may take for the next updates to roll out, a patch would be appreciated.&lt;/p&gt;&#xA;&lt;p&gt;This was discussed here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://mail.gnome.org/archives/evolution-list/2021-April/date.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/evolution-list/2021-April/date.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://mail.gnome.org/archives/evolution-list/2021-April/msg00088.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mail.gnome.org/archives/evolution-list/2021-April/msg00088.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Per the above:&lt;/p&gt;&#xA;&lt;p&gt;*On Sat, 2021-04-24 at 20:59 +0000, Steve via evolution-list wrote:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;I see you have pushed a Redhat patch through for Evolution.&#xA;How would one go about getting similar for Debian &amp;gt;&amp;gt; Linux Mint?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You'd contact the packagers of your distribution as they provide the&#xA;packages for the distribution that you are using.&lt;/p&gt;&#xA;&lt;p&gt;Cheers,&#xA;andre*&lt;/p&gt;&#xA;&lt;p&gt;So, I am submitting this request as a way of initiating contact to the packagers of the distribution I use - Elementary OS - to request this patch.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 5.1.7 Hera&#xA;Built on Ubuntu 18.04.4 LTS&#xA;Linux 5.4.0-72-generic&#xA;GTK 3.22.30&lt;/p&gt;&#xA;&lt;p&gt;Evolution&#xA;3.40.0 (by Flathub.org)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uxKRM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uxKRM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19259" LastActivityDate="2024-01-04T00:01:25.167" Title="Requesting a patch for Evolution to access iCloud Mail" Tags="|release-hera|gnome|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27835" PostTypeId="1" CreationDate="2021-04-27T14:30:04.793" Score="1" ViewCount="250" Body="&lt;p&gt;In previous versions of elementray OS you could make &amp;quot;numeric pad keys always enter digits&amp;quot;. See &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/373/how-do-i-enable-numlock-at-login&quot;&gt;this answer&lt;/a&gt; and screenshot below:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/F6i0W.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F6i0W.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This setting is also available on Ubuntu (see &lt;a href=&quot;https://superuser.com/questions/71630/numlock-is-completely-useless-and-i-want-to-disable-it-completely-on-linux&quot;&gt;this answer&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;However, in elementary OS 5, this setting is not available:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wCvOc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wCvOc.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't know if I accidentally press the numlock key or it's some random bug, but I'm constantly trying to enter a number with the numeric pad and end up moving to the top of the document, enabling &amp;quot;insert&amp;quot; or deleting something. Is there any way of making sure that the numeric keyboard lives to its name and only enters numbers in elementary OS 5 (and hopefully the upcoming 6)?&lt;/p&gt;&#xA;&lt;p&gt;Quoting &lt;a href=&quot;https://superuser.com/questions/71630/numlock-is-completely-useless-and-i-want-to-disable-it-completely-on-linux&quot;&gt;this question&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Please note that I do not want to know how to turn Num Lock on at startup, I do not want to know how to tear the key off, I want to disable it so that it stays on all the time and can't be turned off by mistake. Any idea how to do that?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;EDIT: Found &lt;a href=&quot;https://askubuntu.com/questions/509784/numeric-pad-always-enter-digits&quot;&gt;this answer&lt;/a&gt;, that proposes this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;setxkbmap -option numpad:mac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It works perfectly but it turns off seemingly randomly or after some time. To make it permanent, I need to edit 10-keyboard.conf (see &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?pid=1222529#p1222529&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;), but I don't know where to find it. For now I added that command to the startup commands and seems to work.&lt;/p&gt;&#xA;" OwnerUserId="6225" LastEditorUserId="6225" LastEditDate="2021-04-27T22:55:51.967" LastActivityDate="2021-04-27T22:55:51.967" Title="How to force lock num to be always on" Tags="|keyboard|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="27836" PostTypeId="1" CreationDate="2021-04-27T18:09:05.763" Score="0" ViewCount="1264" Body="&lt;p&gt;I am running the latest version of Elementary &lt;em&gt;5.1.7 Hera&lt;/em&gt; on my Dell XPS 15 but I get the message &lt;code&gt;ping: sendmsg: No buffer space available&lt;/code&gt;, after about a minute when running a ping.&lt;/p&gt;&#xA;&lt;p&gt;Internet access gets disabled even while I'm connected to WiFi.&lt;/p&gt;&#xA;&lt;p&gt;Kindly advise what can be done to remediate this. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="25678" LastActivityDate="2024-01-13T07:09:31.197" Title="ping: sendmsg: No buffer space available" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27837" PostTypeId="2" ParentId="24499" CreationDate="2021-04-27T19:03:06.850" Score="0" Body="&lt;p&gt;I would love to know this too. elementary aims to ship with flatpak as default, but all my current flatpak apps are blurry in plank (thunderbird,zoom)&lt;/p&gt;&#xA;" OwnerUserId="25679" LastActivityDate="2021-04-27T19:03:06.850" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27839" PostTypeId="2" ParentId="27836" CreationDate="2021-04-28T00:54:23.200" Score="0" Body="&lt;p&gt;The error message means that you have hit a maximum value for a system parameter, most likely the &lt;code&gt;/proc/sys/net/core/wmem_max&lt;/code&gt; value. This setting is the maximum amount &amp;quot;receive socket memory&amp;quot;, but further investigation will be needed.&lt;/p&gt;&#xA;&lt;p&gt;This generally happens when one of three things is taking place:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;the network adapter is broken&lt;/li&gt;&#xA;&lt;li&gt;the network adapter is using a driver that is not 100% supported&lt;/li&gt;&#xA;&lt;li&gt;the entire system is stressed out because it is mining BitCoin or something like that&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;You &lt;em&gt;can&lt;/em&gt; look at increasing the &lt;code&gt;wmem_max&lt;/code&gt; value, but it is very rarely the correct solution to a problem.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-04-28T00:54:23.200" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27840" PostTypeId="1" CreationDate="2021-04-28T06:38:15.317" Score="1" ViewCount="1211" Body="&lt;p&gt;I can't find a driver for this adapter model&lt;/p&gt;&#xA;" OwnerUserId="25680" LastActivityDate="2024-03-22T20:01:35.217" Title="TP-Link Archer T4U Plus driver" Tags="|wifi|drivers|usb-drive|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27841" PostTypeId="2" ParentId="27840" CreationDate="2021-04-28T06:52:59.553" Score="0" Body="&lt;p&gt;TP-Link does not provide any official drivers for Linux-based operating systems. They do have &lt;a href=&quot;https://www.tp-link.com/support/download/archer-t4u/#Driver&quot; rel=&quot;nofollow noreferrer&quot;&gt;a download page for the T4U&lt;/a&gt;, but the kernel support is limited to 2.6.18 to 4.11. Newer kernels are not at all supported.&lt;/p&gt;&#xA;&lt;p&gt;That said, you &lt;em&gt;may&lt;/em&gt; be able to get by with one of the open drivers. This will be 100% dependent on the chipset in your T4u, though.&lt;/p&gt;&#xA;&lt;p&gt;If your network adapter is using the &lt;code&gt;RTL8812AU&lt;/code&gt; chipset, then &lt;a href=&quot;https://aur.archlinux.org/packages/rtl8812au-dkms-git/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this driver from thelinuxguy&lt;/a&gt; should work for you.&lt;/p&gt;&#xA;&lt;p&gt;If you have a European model, which &lt;em&gt;may&lt;/em&gt; use the &lt;code&gt;RTL8822A&lt;/code&gt; chipset, then you'll need to find something that works. Unfortunately I do not have any experience with that specific chipset, so do not know where you can find a driver.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-04-28T06:52:59.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27846" PostTypeId="1" CreationDate="2021-04-28T23:02:49.263" Score="0" ViewCount="312" Body="&lt;p&gt;I have a very old Acer Aspire 3000 laptop. is elementary OS available in 32 bit? This is a very simple question. Why can not I post it?&lt;/p&gt;&#xA;" OwnerUserId="25691" LastActivityDate="2024-01-14T09:08:36.063" Title="Availability of elementry OS 32 bit?" Tags="|system|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27848" PostTypeId="2" ParentId="27846" CreationDate="2021-04-29T01:22:12.567" Score="0" Body="&lt;p&gt;No, elementary is not available in 32 bit.&lt;/p&gt;&#xA;&lt;p&gt;You may find this useful: &lt;a href=&quot;https://itsfoss.com/32-bit-linux-distributions/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/32-bit-linux-distributions/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="20157" LastActivityDate="2021-04-29T01:22:12.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27849" PostTypeId="1" CreationDate="2021-04-29T12:06:37.953" Score="0" ViewCount="38" Body="&lt;p&gt;I recently upgraded my EOS computer by installing &lt;strong&gt;EOS Hera 5.1&lt;/strong&gt;. I did a normal install on the root directory &amp;quot;/&amp;quot; but kept everything else (other partitions like /home, /opt etc).&lt;/p&gt;&#xA;&lt;p&gt;I have a printer/scanner combination here (&lt;em&gt;Canon PIXMA MG5750&lt;/em&gt;) that I already used before with my previous EOS Loki.&lt;/p&gt;&#xA;&lt;p&gt;After upgrading the computer, scanning works (connected via USB cable and with package &lt;em&gt;simple-scan&lt;/em&gt;), but printing DOES NOT. It did work with Loki on the same computer. I have not moved any cable or reconfigured the printer or changed anything else but the EOS installation.&lt;/p&gt;&#xA;&lt;p&gt;What's the concrete problem? When I switch on the printer and enter the settings screen printer, I see that my printer is correctly recognized (as &lt;em&gt;Canon MG5700 series&lt;/em&gt;), but marked as disabled. I also cannot use it to print from a program (it does not show the printer in the printing submenus).&lt;/p&gt;&#xA;&lt;p&gt;I checked the &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17989/wifi-printers-all-disabled&quot;&gt;only other similar question here on eos stackexchange&lt;/a&gt;, but it did not help me. Maybe it's just something I don't understand about the answers.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastActivityDate="2024-01-17T01:01:30.167" Title="Canon WIFI printer disabled" Tags="|release-hera|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27850" PostTypeId="2" ParentId="9681" CreationDate="2021-04-29T18:03:43.497" Score="0" Body="&lt;p&gt;You can get rid of it completely by issuig:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove appcenter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-04-29T18:03:43.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27852" PostTypeId="2" ParentId="21401" CreationDate="2021-04-30T08:38:41.097" Score="0" Body="&lt;p&gt;As per the feature matrix in the linux-surface repo, the keyboard should work if you install the linux-surface kernel.&lt;/p&gt;&#xA;&lt;p&gt;Follow these steps:&#xA;&lt;a href=&quot;https://github.com/linux-surface/linux-surface/wiki/Installation-and-Setup#surface-kernel-installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/linux-surface/linux-surface/wiki/Installation-and-Setup#surface-kernel-installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2021-04-30T08:38:41.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27854" PostTypeId="2" ParentId="25485" CreationDate="2021-04-30T20:16:19.773" Score="0" Body="&lt;p&gt;The live USB still displays with the same &amp;quot;squished screen&amp;quot; problem. However after installing the OS and running all the updates, it displays properly (only using the nouveau driver).&lt;/p&gt;&#xA;&lt;p&gt;I then installed the latest proprietary NVIDIA driver (nvidia-video-460) which also displays properly, without the &amp;quot;squished&amp;quot; screen.&lt;/p&gt;&#xA;&lt;p&gt;I also installed Linux Mint MATE 20.1 which displays correctly before updating any software. I'm not sure whether an update to kernel or the nouveau driver was responsible for fixing this mess.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Note that there's still some driver issues with this laptop. The screen &amp;quot;flickers&amp;quot; or &amp;quot;glitches&amp;quot; about every minute, or more often. While this can be annoying, it's at least now useable.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="23713" LastActivityDate="2021-04-30T20:16:19.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27855" PostTypeId="2" ParentId="27826" CreationDate="2021-05-01T07:01:07.707" Score="0" Body="&lt;p&gt;Files is known to struggle with showing very large folders (with &amp;gt;10,000 items) in IconView.  Large, deep, git repositories are even worse since Files tries to determine the status of each subfolder based on all its children. If the folder is remote or on a slow device then it is even worse. Showing large folders in List View is much faster but the git problem remains.&lt;/p&gt;&#xA;&lt;p&gt;If Files is closed with a tab showing such a folder then startup will be delayed as it tries to restore it.  You can turn off restoring by turning of &amp;quot;History&amp;quot; in System Settings/Security &amp;amp; Privacy (but that affects several apps) or with the commandline &lt;code&gt; gsettings set io.elementary.files.preferences restore-tabs false&lt;/code&gt; or using dconf-editor.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-05-01T07:01:07.707" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27858" PostTypeId="1" CreationDate="2021-05-01T10:27:57.900" Score="0" ViewCount="104" Body="&lt;p&gt;I'm trying to build a fresh clone of Granite's master branch, on elementary OS 5.1.7 Hera, but I'm getting these errors:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;../lib/Widgets/SwitchModelButton.vala:65.9-65.19: error: The type name `var' could not be found&#xA;        unowned var description_style_context = description_label.get_style_context ();&#xA;        ^^^^^^^^^^^&#xA;../lib/Widgets/Utils.vala:298.5-298.15: error: The type name `var' could not be found&#xA;    unowned var gtk_settings = Gtk.Settings.get_default ();&#xA;    ^^^^^^^^^^^&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Dependency wise I did not get warning from meson:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson build --prefix=/usr&#xA;The Meson build system&#xA;Version: 0.49.2&#xA;Source dir: /home/peteruithoven/Projects/elementary/granite&#xA;Build dir: /home/peteruithoven/Projects/elementary/granite/build&#xA;Build type: native build&#xA;Project name: granite&#xA;Project version: 6.1.0&#xA;Native C compiler: cc (gcc 7.5.0 &amp;quot;cc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0&amp;quot;)&#xA;Native Vala compiler: valac (valac 0.40.25)&#xA;Build machine cpu family: x86_64&#xA;Build machine cpu: x86_64&#xA;Found pkg-config: /usr/bin/pkg-config (0.29.1)&#xA;Dependency gio-unix-2.0 found: YES 2.56.4&#xA;Dependency gee-0.8 found: YES 0.20.2&#xA;Dependency gio-2.0 found: YES 2.56.4&#xA;Dependency glib-2.0 found: YES 2.56.4&#xA;Dependency gobject-2.0 found: YES 2.56.4&#xA;Dependency gtk+-3.0 found: YES 3.22.30&#xA;Configuring Config.vala using configuration&#xA;Library m found: YES&#xA;Library posix found: YES&#xA;Program g-ir-compiler found: YES (/usr/bin/g-ir-compiler)&#xA;Program /home/peteruithoven/Projects/elementary/granite/meson/post_install.py found: YES (/home/peteruithoven/Projects/elementary/granite/meson/post_install.py)&#xA;Build targets in project: 10&#xA;Found ninja-1.8.2 at /usr/bin/ninja&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Is a newer vala compiler required or something like that? Can I even build the latest granite on v5?&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2024-01-17T05:07:05.850" Title="error: The type name `var' could not be found" Tags="|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27859" PostTypeId="1" AcceptedAnswerId="27867" CreationDate="2021-05-01T17:11:34.153" Score="0" ViewCount="500" Body="&lt;p&gt;I'm trying to contribute to Granite, but I'm still on elementary OS v5, which doesn't include the required vala computed version.&lt;/p&gt;&#xA;&lt;p&gt;Thanks to jeremypw I found the relevant ppa:&lt;br /&gt;&#xA;&lt;a href=&quot;https://launchpad.net/%7Evala-team/+archive/ubuntu/next&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~vala-team/+archive/ubuntu/next&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I installed the ppa:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:vala-team/next &#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But then I struggled knowing what to install. &lt;code&gt;valac&lt;/code&gt; itself was still at 0.40:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;valac/bionic,now 0.40.25-0ubuntu1~18.04~valateam0 amd64 [installed]&#xA;  C# like language for the GObject system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I did find valac-bin:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;valac-bin/bionic,now 0.52.2-0ubuntu1~18.04~valateam0 amd64 [installed]&#xA;  internal package for C# like language for the GObject system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After installing things look good:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;valac --version&#xA;Vala 0.52.2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But when running meson I'm now getting this error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson build --prefix=/usr &#xA;The Meson build system&#xA;Version: 0.49.2&#xA;Source dir: /home/peteruithoven/Projects/elementary/granite&#xA;Build dir: /home/peteruithoven/Projects/elementary/granite/build&#xA;Build type: native build&#xA;Project name: granite&#xA;Project version: 6.1.0&#xA;Native C compiler: cc (gcc 7.5.0 &amp;quot;cc (Ubuntu 7.5.0-3ubuntu1~18.04) 7.5.0&amp;quot;)&#xA;&#xA;meson.build:1:0: ERROR:  Vala compiler 'valac' can not compile programs&#xA;&#xA;A full log can be found at /home/peteruithoven/Projects/elementary/granite/build/meson-logs/meson-log.txt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2021-05-03T07:25:52.343" Title="How to install newer vala compiler?" Tags="|vala|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27860" PostTypeId="2" ParentId="21436" CreationDate="2021-05-01T17:30:51.460" Score="0" Body="&lt;p&gt;I did it by installing Evolution and setting it with &lt;a href=&quot;https://webhostinghero.org/ubuntu-icloud-sync/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Let it sets, then open Elementary Mail app and you'll find your iCloud mail account.&#xA;You'll just have to remove evolution and that's all.&lt;/p&gt;&#xA;" OwnerUserId="23787" LastActivityDate="2021-05-01T17:30:51.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27861" PostTypeId="2" ParentId="27858" CreationDate="2021-05-01T17:46:42.370" Score="0" Body="&lt;p&gt;Looks like a newer vala computer was indeed needed, probably 0.48:&lt;br /&gt;&#xA;&lt;a href=&quot;https://github.com/elementary/granite/issues/492#issuecomment-830612898&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/granite/issues/492#issuecomment-830612898&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2021-05-01T17:46:42.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27862" PostTypeId="1" AcceptedAnswerId="27926" CreationDate="2021-05-01T18:41:32.337" Score="0" ViewCount="88" Body="&lt;p&gt;I tried installing Odin Beta today and it went smoothly. With the default nouveau drivers it works fine, albeit a tad slow during animations.&lt;/p&gt;&#xA;&lt;p&gt;Then I proceeded to install &lt;code&gt;nvidia-drivers-460&lt;/code&gt;. The installation completed alright but after a restart, on the logon screen, it freezes. The thing is, it still running, it's just the image that froze. If I type in my password nothing changes on screen but the login happens. I can switch tty with CTRL+ALT+F1, for instance, and reboot but all the while the image on display stays the same.&lt;/p&gt;&#xA;&lt;p&gt;I'm using a 3060 Ti. I was using the Juno with the NVIDIA drivers just fine, including the 460 one.&lt;/p&gt;&#xA;" OwnerUserId="15272" LastEditorUserId="15272" LastEditDate="2021-05-03T17:01:51.123" LastActivityDate="2021-05-10T14:14:10.370" Title="Odin beta screen freezes on boot but computer still working after installing NVIDIA drivers" Tags="|nvidia|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27867" PostTypeId="2" ParentId="27859" CreationDate="2021-05-03T07:25:52.343" Score="1" Body="&lt;p&gt;You need to install the matching vapi package (valac-0.52-vapi) as well the compiler binary (valac-bin).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-05-03T07:25:52.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27868" PostTypeId="1" CreationDate="2021-05-03T13:31:19.553" Score="1" ViewCount="65" Body="&lt;p&gt;Trying new Odin beta ask for an EFI partition, how should I set up it? I want to keep my Manjaro &amp;amp; Windows boot options alive, too.&lt;/p&gt;&#xA;" OwnerUserId="5056" LastActivityDate="2021-05-03T13:31:19.553" Title="Installing v6 Odin beta together with existing Manjaro and Windows partitions . Setup of EFI boot partition" Tags="|system-installation|dual-boot|uefi|release-odin|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27869" PostTypeId="1" CreationDate="2021-05-03T19:45:39.127" Score="0" ViewCount="152" Body="&lt;p&gt;On my elementary OS 5.1.7 laptop, somehow the Powerline fonts are broken, whereas on my desktop, they are not. Here are pictures from my laptop of &lt;code&gt;tmux&lt;/code&gt; and &lt;code&gt;nvim&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rkbvk.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rkbvk.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/VEQlI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/VEQlI.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have reinstalled the &lt;code&gt;fonts-powerline&lt;/code&gt; package and have made sure I have no overrides in &lt;code&gt;~/&lt;/code&gt; or in &lt;code&gt;/etc/fonts&lt;/code&gt;, but the symbols are broken as you can see. My elementary OS desktop, running the same version, does not have the same problem. I have also run &lt;code&gt;sudo fc-cache --verbose --really-force&lt;/code&gt;, and no dice.&lt;/p&gt;&#xA;&lt;p&gt;What can I try to resolve this issue?&lt;/p&gt;&#xA;" OwnerUserId="7" LastActivityDate="2024-01-19T08:04:35.467" Title="Fixing Broken Powerline Symbols?" Tags="|release-hera|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27871" PostTypeId="2" ParentId="27869" CreationDate="2021-05-04T00:47:51.583" Score="0" Body="&lt;p&gt;I'm not sure why I had to do this but I manually edited dconf to set the font. You can use the &lt;code&gt;dconf-editor&lt;/code&gt; utility from that same package, or:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;dconf write /io/elementary/terminal/settings/font '&amp;quot;Roboto Mono for Powerline 10&amp;quot;'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And yes, you need the strange double quoting, it uses GVariant format so it needs strings formatted like this.&lt;/p&gt;&#xA;&lt;p&gt;My understanding was that &lt;code&gt;fonts-powerline&lt;/code&gt; patched the fonts, but this works so I'm going to stop pursuing ghosts.&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2021-05-04T01:01:38.833" LastActivityDate="2021-05-04T01:01:38.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27873" PostTypeId="1" AcceptedAnswerId="27874" CreationDate="2021-05-04T10:18:26.113" Score="0" ViewCount="58" Body="&lt;p&gt;I'm just wondering if I can run &lt;code&gt;sudo apt autoremove&lt;/code&gt; with the following packages installed. I have run it a number of times before on ubuntu and I am on a laptop and sometimes the GUI fails, sound card does not work or some packages just break. So I just wanted to double check this time.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~ $ sudo apt-get install ppa-purge&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages were automatically installed and are no longer required:&#xA;  liblept5 libnvidia-cfg1-435 libnvidia-cfg1-455 libnvidia-common-435 libnvidia-common-455 libnvidia-compute-435 libnvidia-compute-435:i386&#xA;  libnvidia-compute-455 libnvidia-compute-455:i386 libnvidia-decode-435 libnvidia-decode-435:i386 libnvidia-decode-455 libnvidia-decode-455:i386&#xA;  libnvidia-encode-435 libnvidia-encode-435:i386 libnvidia-encode-455 libnvidia-encode-455:i386 libnvidia-fbc1-435 libnvidia-fbc1-435:i386 libnvidia-fbc1-455&#xA;  libnvidia-fbc1-455:i386 libnvidia-gl-435 libnvidia-gl-435:i386 libnvidia-gl-455 libnvidia-gl-455:i386 libnvidia-ifr1-435 libnvidia-ifr1-435:i386&#xA;  libnvidia-ifr1-455 libnvidia-ifr1-455:i386 libpython3.8-minimal libpython3.8-stdlib libqt5multimedia5 libqt5positioning5 libqt5qml5 libqt5quick5&#xA;  libqt5quickwidgets5 libqt5sensors5 libqt5webchannel5 libqt5webkit5 libtesseract4 linux-headers-5.4.0-42-generic linux-headers-5.4.0-47-generic&#xA;  linux-hwe-5.4-headers-5.4.0-42 linux-hwe-5.4-headers-5.4.0-47 linux-image-5.4.0-42-generic linux-image-5.4.0-47-generic linux-modules-5.4.0-42-generic&#xA;  linux-modules-5.4.0-47-generic linux-modules-extra-5.4.0-42-generic linux-modules-extra-5.4.0-47-generic nvidia-compute-utils-435 nvidia-compute-utils-455&#xA;  nvidia-dkms-435 nvidia-dkms-455 nvidia-kernel-common-435 nvidia-kernel-common-455 nvidia-kernel-source-435 nvidia-kernel-source-455 nvidia-utils-435&#xA;  nvidia-utils-455 python3.8-minimal qml-module-qtgraphicaleffects qml-module-qtquick-controls qml-module-qtquick-dialogs qml-module-qtquick-layouts&#xA;  qml-module-qtquick-privatewidgets qml-module-qtquick-window2 qml-module-qtquick2 tesseract-ocr-eng tesseract-ocr-osd xserver-xorg-video-nvidia-435&#xA;  xserver-xorg-video-nvidia-455&#xA;Use 'sudo apt autoremove' to remove them.&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14200" LastActivityDate="2021-05-05T14:45:07.703" Title="Can I run 'sudo apt autoremove' safley?" Tags="|apt|package-management|aptitude|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27874" PostTypeId="2" ParentId="27873" CreationDate="2021-05-04T11:54:00.733" Score="1" Body="&lt;p&gt;&lt;em&gt;Generally&lt;/em&gt; &lt;code&gt;apt&lt;/code&gt; is quite good at knowing which packages are no longer required, but it’s good to see I’m not the only one who reads through the list to see what’s being removed before pulling the trigger &lt;/p&gt;&#xA;&lt;p&gt;To answer the question, it will probably be better to look through the packages as groups:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The nvidia 435 and 455 packages can be removed if you have the 460 (or newer) package installed&lt;/li&gt;&#xA;&lt;li&gt;The &lt;code&gt;Linux&lt;/code&gt;-prefixed packages have all been replaced with newer software&lt;/li&gt;&#xA;&lt;li&gt;The Qt-based packages I’m not 100% certain of, as a lot of software uses those libraries. You may want to use &lt;code&gt;apt list --installed&lt;/code&gt; to see if you have a newer version installed&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;As always, it’s a good idea to keep reliable backups handy in the event of a hiccup &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-04T11:54:00.733" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="27875" PostTypeId="1" CreationDate="2021-05-04T12:43:15.777" Score="0" ViewCount="30" Body="&lt;p&gt;Im looking for an easy and quick way to switch between my audio devices, since i swap them daily. Headphones are conected to laptop, and speakers to monitor/hdmi.&lt;/p&gt;&#xA;&lt;p&gt;Every time i need to open sound settings and switch manualy which can be a bit annoying and waste of time.&lt;/p&gt;&#xA;&lt;p&gt;Is there some hotkeys combination that can be used? Or proper indicator switch for wingpanel? (i tried installing few but did not have sucess)&lt;/p&gt;&#xA;&lt;p&gt;My level of technical knowledge on linux is begginer i believe, so keep that in mind :)&lt;/p&gt;&#xA;&lt;p&gt;Thank you :pray:&lt;/p&gt;&#xA;" OwnerUserId="25730" LastEditorUserId="25730" LastEditDate="2021-05-04T16:17:37.407" LastActivityDate="2021-05-04T16:17:37.407" Title="Switching between audio devices on EOS.. Hotkeys? Wingpanel?" Tags="|wingpanel|audio|indicator-sound|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27878" PostTypeId="2" ParentId="22252" CreationDate="2021-05-04T19:48:26.903" Score="0" Body="&lt;p&gt;I just updated my system with the app center application and now Zoom crashes when I try to start a meeting. I tried removing, reinstalling, and installing also the snap version. They install OK, but the application is not responsive.&lt;/p&gt;&#xA;" OwnerUserId="25735" LastActivityDate="2021-05-04T19:48:26.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27879" PostTypeId="1" CreationDate="2021-05-04T19:55:47.810" Score="1" ViewCount="15" Body="&lt;p&gt;I'm using KMidimon to debug why my midi drums randomly stopped working.&lt;/p&gt;&#xA;&lt;p&gt;It appears that every other midi note isn't being transferred.&lt;/p&gt;&#xA;&lt;p&gt;I highly, highly doubt this is an issue with the drums because they're still triggering samples not on the computer.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have any ideas on how I could solve this?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: I've seen come to learn that these drums transmit the midi-on and midi-off notes one right after the other.  There is no sustain.  I still don't know why the result is what it is though.  And am interested in any debugging advice.&lt;/p&gt;&#xA;" OwnerUserId="13227" LastEditorUserId="8517" LastEditDate="2022-07-08T03:53:56.807" LastActivityDate="2022-07-08T03:53:56.807" Title="Every other MIDI note doesn't transmit?" Tags="|midi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27881" PostTypeId="2" ParentId="22463" CreationDate="2021-05-04T22:09:53.663" Score="0" Body="&lt;p&gt;Similar issues, reinstalled it on AMD Ryzen 7 4700U APU. Still no second monitor, still apparently no driver that works already installed. Guess I will tinker and go break it entirely once again because nobody can simply say &amp;quot;no, AMD APUs are not supported&amp;quot; so that it is clear that I won't get it working until the drivers I try out, support it.&lt;/p&gt;&#xA;&lt;p&gt;If there is an open source driver coming with eOS, it certainly does not work for AMD APUs.&lt;/p&gt;&#xA;" OwnerUserId="25737" LastActivityDate="2021-05-04T22:09:53.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27882" PostTypeId="1" AcceptedAnswerId="27888" CreationDate="2021-05-05T02:10:08.427" Score="0" ViewCount="85" Body="&lt;p&gt;Unfortunately (and quite stupidly), I had .txt files set to open with Libreoffice Writer by default, and when I clicked on my sources.list file to add something, it opened up there.  I suspect this is likely the cause of my problem, as now I can't get my repos to update, or install any packages.&lt;/p&gt;&#xA;&lt;p&gt;When I try to update the repos, I get the following error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;E: Type '﻿deb' is not known on line 1 in source list /etc/apt/sources.list&#xA;E: The list of sources could not be read.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Line 1 in sources.list reads:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb cdrom:[elementary OS 5.1 hera - stable amd64 (20200814)]/ bionic contrib main non-free&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Commenting out the first line doesn't help either.  If I put a &amp;quot;#&amp;quot; before &amp;quot;deb&amp;quot; I get the following error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;E: Malformed line 1 in source list /etc/apt/sources.list (type)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Given that I can't install any packages or update my repo until I fix this, what do I do?&lt;/p&gt;&#xA;" OwnerUserId="25740" LastActivityDate="2021-05-05T14:40:26.403" Title="Can't update repos due to a malformed sources.list file. How can I fix it?" Tags="|updates|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27883" PostTypeId="1" CreationDate="2021-05-05T04:25:00.713" Score="2" ViewCount="70" Body="&lt;p&gt;Suspend does not go suspend/sleep, it wakes immediately, around 2 secs after the suspend.&lt;/p&gt;&#xA;&lt;p&gt;system:&#xA;elementary OS 5.1.7 Hera&#xA;Macbook Air 13&amp;quot; Mid 2013&lt;/p&gt;&#xA;" OwnerUserId="25741" LastActivityDate="2021-05-05T04:25:00.713" Title="Suspend not working" Tags="|suspend|macbook|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27886" PostTypeId="1" CreationDate="2021-05-05T12:35:53.160" Score="0" ViewCount="18" Body="&lt;p&gt;I would like to get permissions to save translations but this url &lt;a href=&quot;https://translators-slack.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://translators-slack.elementary.io/&lt;/a&gt; not reached.&lt;/p&gt;&#xA;" OwnerDisplayName="user25749" LastActivityDate="2024-01-31T11:09:06.050" Title="Translation Url not reached" Tags="|elementary-website|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27887" PostTypeId="1" CreationDate="2021-05-05T14:12:43.163" Score="0" ViewCount="59" Body="&lt;p&gt;I have been using elementary OS for some time now(months). I have it dual-booted with Windows 10. What I did to open elementary OS was to press &amp;quot;esc&amp;quot; while booting, then choose boot options, then ubunty and after that grub would open. Thats how I have been using elementary OS. If I don't this windows 10 will be booted automatically. Someone please help me I want grub to open at automatically when I start my system(laptop) and I can choose windows or Elementary OS then.&#xA;I have a HP laptop with specifications:&#xA;i-3 6006U&#xA;8GB DDR4 ram&#xA;1TB Rom&lt;/p&gt;&#xA;" OwnerUserId="25751" LastActivityDate="2024-01-21T00:03:25.363" Title="Grub does not open automatically" Tags="|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27888" PostTypeId="2" ParentId="27882" CreationDate="2021-05-05T14:40:26.403" Score="0" Body="&lt;p&gt;Use the following command to fix your &lt;code&gt;sources.list&lt;/code&gt; (copy and past):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cat &amp;lt;&amp;lt;EOF |sudo tee  /etc/apt/sources.list&#xA;&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic main restricted universe multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-security main restricted universe multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted universe multiverse&#xA;deb http://us.archive.ubuntu.com/ubuntu/ bionic-proposed main restricted universe multiverse&#xA;deb http://archive.canonical.com/ubuntu/ bionic partner&#xA;EOF&#xA;&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2021-05-05T14:40:26.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27889" PostTypeId="2" ParentId="27873" CreationDate="2021-05-05T14:45:07.703" Score="1" Body="&lt;p&gt;&lt;code&gt;apt autoremove&lt;/code&gt; will remove files that are still on your system but are no longer needed because the application that required them is no longer installed, that's why you receive:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages were automatically installed and are no longer required&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It is safe and recommended executing &lt;code&gt;sudo apt autoremove&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="4427" LastActivityDate="2021-05-05T14:45:07.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27890" PostTypeId="2" ParentId="27887" CreationDate="2021-05-05T16:10:37.700" Score="0" Body="&lt;p&gt;This needs to be changed in Windows, as that OS loves to take control of the boot partition. Fortunately, it’s not too hard to fix.&lt;/p&gt;&#xA;&lt;p&gt;In Windows:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open “Command Prompt” as administrator&lt;/li&gt;&#xA;&lt;li&gt;Run the following command:&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Restart the machine to test&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-05T16:10:37.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27894" PostTypeId="1" CreationDate="2021-05-05T19:10:57.503" Score="0" ViewCount="38" Body="&lt;p&gt;Complete n00b at linux. (and to be honest most things command line) trying desperately to figure out why I cannot change the displays backlight brightness. When I adjust it via the keyboard shortcuts the brigtness bar reacts but the actual display brightness does not.&lt;/p&gt;&#xA;&lt;p&gt;I have tried adjusting it in settings and power settings. I have duckduckgo'ed my a** off and found all kinda suggestions, and all to no avail. I ran &lt;code&gt;lshw -c video&lt;/code&gt; and confirmed that the driver looks like an AMD driver. so That doesn't seem to be it.&lt;/p&gt;&#xA;&lt;p&gt;Anyone willing to help a fellow nerd trying to escape the watchful eye of microsoft? :)&lt;/p&gt;&#xA;&lt;p&gt;model number is : SF314-42-R7RK&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;*-display UNCLAIMED&#xA;description: VGA compatible controller&#xA;product: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;vendor: Advanced Micro Devices, Inc. [AMD/ATI]&#xA;physical id: 0&#xA;bus info: pci@0000:03:00.0&#xA;version: c3&#xA;width: 64 bits&#xA;clock: 33MHz&#xA;capabilities: pm pciexpress msi msix vga_controller bus_master cap_list&#xA;configuration: latency=0&#xA;resources: memory:b0000000-bfffffff memory:c0000000-c01fffff ioport:1000(size=256) memory:c0600000-c067ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25756" LastEditorUserId="25756" LastEditDate="2021-05-08T12:41:57.957" LastActivityDate="2021-05-08T12:41:57.957" Title="Screen brightness not working Acer Swift AMD Ryzen5 (elementaryos)" Tags="|ubuntu|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27895" PostTypeId="1" AcceptedAnswerId="27904" CreationDate="2021-05-05T19:17:58.657" Score="0" ViewCount="189" Body="&lt;p&gt;The folders in 'Home' (e.g. Documents, Downloads, etc.) all have nice icons on their folders. I have a 'Google Drive' folder in my home area where I sync my files with Google Drive. I would like to change this folder icon.&#xA;I already tried to include icons in the elementary icon folder (/usr/share/elementary/places) and set the 'standard::icon' attribute of the folder via gio command. Unfortunately I get an error that says &amp;quot;gio: Setting attribute standard::icon not supported&amp;quot;. I furthermore tried to set the attribute 'metadata::custom-icon' as explained &lt;a href=&quot;https://wiki.ubuntuusers.de/gio/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;. Yet this also did not change my folder icon.&#xA;I also found an &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/169/is-there-a-way-to-install-custom-folder-icons&quot;&gt;old post&lt;/a&gt; where the icon was changed with some workaround. I would prefer a clean solution. Can someone explain me how I can achieve changing a folder icon?&lt;/p&gt;&#xA;" OwnerUserId="25641" LastActivityDate="2022-01-02T15:30:19.093" Title="Can I add a folder icon to a custom folder?" Tags="|release-hera|pantheon-files|icons|folder|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27896" PostTypeId="1" CreationDate="2021-05-05T19:27:18.083" Score="0" ViewCount="396" Body="&lt;p&gt;This problem has plagued me for the past couple days. I noticed that one day I updated everything from the AppCenter, and it still had 2 Operating System Updates left, so I tried to update them again, it would just go from Starting to Installing, then stop and act like I had never pressed the update button.&lt;/p&gt;&#xA;&lt;p&gt;I've tried updating from command line, running flatpak repair (and --reinstall-all), flatpak update, none of these helped.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0X9F8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0X9F8.png&quot; alt=&quot;AppCenter Update&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25757" LastActivityDate="2024-03-04T19:09:26.253" Title="AppCenter won't update io.elementary.Platform(and SDK) Flatpak runtime" Tags="|appcenter|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27900" PostTypeId="1" CreationDate="2021-05-06T02:19:05.940" Score="1" ViewCount="46" Body="&lt;p&gt;I have been attempting to open port on my laptop running eOS, I made sure the UFW was turned off.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;$ sudo ufw status Status: inactive &lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Before when I was using different kind of Linux distributions, ports were working absolutely fine.&lt;/p&gt;&#xA;&lt;p&gt;Does eOS have limitations when it comes to remote access? are there settings other than UFW to consider?&lt;/p&gt;&#xA;" OwnerUserId="25761" LastActivityDate="2021-05-06T02:19:05.940" Title="ElementaryOS doesn't accept any kind of port forwarding" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27904" PostTypeId="2" ParentId="27895" CreationDate="2021-05-06T08:16:25.367" Score="0" Body="&lt;p&gt;There is an outstanding issue about this on Github here - &lt;a href=&quot;https://github.com/elementary/files/issues/171&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/171&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;An attempt was made to implement custom overlays to folder icons but it was unsuccessful.  It would probably be easier to enable Files to honour a &amp;quot;custom-icon&amp;quot; metadata attribute but whether the UX team would want the user to completely change icons arbitrarily is another question.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-05-06T08:16:25.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27905" PostTypeId="1" CreationDate="2021-05-06T08:19:26.927" Score="0" ViewCount="127" Body="&lt;p&gt;Today I installed Elementary OS 5.1.7 and tried to run the update. Unfortunately, updates cannot be performed. Each time, it hangs on the Waiting for package manager lock message and puts the update at the end of the list.&lt;/p&gt;&#xA;&lt;p&gt;Can this problem be fixed?&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;" OwnerUserId="25770" LastActivityDate="2024-02-05T09:08:06.103" Title="Waiting for package manager lock" Tags="|update-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27907" PostTypeId="2" ParentId="27905" CreationDate="2021-05-06T11:19:19.917" Score="0" Body="&lt;p&gt;This can sometimes happen but, fortunately, it’s not a common occurrence? It can generally be resolved like this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Run this command:&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Once this completes, you should be able to update normally.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-06T11:19:19.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27912" PostTypeId="1" CreationDate="2021-05-08T07:21:04.710" Score="0" ViewCount="35" Body="&lt;p&gt;When I try to connect to an encrypted wifi via the gui I get an error message that says &amp;quot;This wireless network could not be connected to.&amp;quot; (see screenshot below).&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/JnDrM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/JnDrM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm not being asked for the wifi password when I click to connect to the encrypted network. If I open up the network settings to connect to a network I don't get the error message but I'm also not being asked for a password and can't connect to the encrypted network. With open (unencrypted) wifis I don't have these problems and everything works fine.&lt;/p&gt;&#xA;&lt;p&gt;If I use network manager cli I'm able to connect to encrypted networks just fine. Any idea what the gui related problem might be?&lt;/p&gt;&#xA;" OwnerUserId="25641" LastActivityDate="2021-05-08T07:21:04.710" Title="Can't connect to encrypted wireless networks via gui" Tags="|release-hera|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27915" PostTypeId="2" ParentId="14337" CreationDate="2021-05-08T17:38:37.163" Score="2" Body="&lt;p&gt;You will need to install the Gnome tweaks tool, not the Elementary tweaks.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install gnome-tweak-tool&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Run the tweaks tool from the apps menu&lt;/p&gt;&#xA;&lt;p&gt;Keyboard and mouse &amp;gt; Additional Layout options &amp;gt; Alt/win key behaviour.&lt;/p&gt;&#xA;&lt;p&gt;Usually i use the option &lt;strong&gt;Ctrl is mapped to Alt/Alt is mapped to win&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="22999" LastActivityDate="2021-05-08T17:38:37.163" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27917" PostTypeId="2" ParentId="1951" CreationDate="2021-05-08T19:55:19.737" Score="0" Body="&lt;p&gt;Plank &amp;gt; preferences &amp;gt; chose position=top + auto hide options. You'll never see the plank again.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-05-08T19:55:19.737" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27920" PostTypeId="1" AcceptedAnswerId="27927" CreationDate="2021-05-09T15:21:10.537" Score="0" ViewCount="73" Body="&lt;p&gt;I am currently using elementary OS 5.1.7 Hera and I had an idea to improve &lt;a href=&quot;https://github.com/elementary/files/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/files&lt;/a&gt;. So I cloned the repo and I was trying to build it using the provided instructions in the README.md&lt;/p&gt;&#xA;&lt;p&gt;However,the compilation fails because I have an outdated version of valac:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson.build:35:4: ERROR: Problem encountered: Valac &amp;gt;= 0.48.2 required!&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When I try to install/upgrade vala with aptitude I get:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;valac is already the newest version (0.40.25-0ubuntu1~18.04~valateam0)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I found &lt;a href=&quot;https://wiki.gnome.org/Projects/Vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; and I know that I can find the source code for newer versions in gnome's gitlab, but I was trying to avoid to have to compile the valac myself.&lt;/p&gt;&#xA;&lt;p&gt;Can someone tell me how to upgrade valac so that I can start developing?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="25795" LastActivityDate="2021-05-10T15:24:39.420" Title="How to upgrade Valac?" Tags="|release-hera|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27921" PostTypeId="2" ParentId="22549" CreationDate="2021-05-09T21:19:52.573" Score="0" Body="&lt;p&gt;I had same issue (on Ubuntu) and somehow suspected to the router. After changing the router, with the same machine and the same OS, it worked without the issue.&lt;/p&gt;&#xA;" OwnerUserId="25797" LastActivityDate="2021-05-09T21:19:52.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27922" PostTypeId="1" CreationDate="2021-05-10T07:34:04.357" Score="0" ViewCount="35" Body="&lt;p&gt;I want to contribute to some elementaryOS apps, like Mail and Files. If I'm on 5.1, the versions of meson and valac are too old for those applications, as specified in their meson.build files.&lt;/p&gt;&#xA;&lt;p&gt;If I'm on the Public Beta of 6.0, I cannot install elementary-sdk because of '&lt;a href=&quot;https://github.com/elementary/os/issues/481&quot; rel=&quot;nofollow noreferrer&quot;&gt;unmet dependencies&lt;/a&gt;'.&lt;/p&gt;&#xA;&lt;p&gt;I'm wondering: how do others work on elementaryOS apps at the moment?&lt;/p&gt;&#xA;" OwnerUserId="25809" LastEditorUserId="25809" LastEditDate="2021-05-10T09:06:35.050" LastActivityDate="2021-05-10T09:29:16.177" Title="What is the currently recommended development setup?" Tags="|pantheon-mail|files|development|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27924" PostTypeId="2" ParentId="27922" CreationDate="2021-05-10T09:29:16.177" Score="1" Body="&lt;p&gt;The problem of the 'unmet dependencies' on elementaryOS 6.0 appears to be solved when installing the elementaryOS 6.0 public beta from their April 30 build (I was still on an apt-updated install of the April 28 build before).&lt;/p&gt;&#xA;&lt;p&gt;So it appears that we can use the 6.0 public beta to work on elementaryOS apps at the moment.&lt;/p&gt;&#xA;" OwnerUserId="25809" LastActivityDate="2021-05-10T09:29:16.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27925" PostTypeId="2" ParentId="9251" CreationDate="2021-05-10T13:11:24.417" Score="1" Body="&lt;p&gt;OPTION 1: open a terminal window from the dock (plank) and start wingpanel with &lt;code&gt;wingpanel &amp;amp;&lt;/code&gt;. The &amp;amp; at the end allows the process to keep running when the terminal is closed.&lt;/p&gt;&#xA;&lt;p&gt;OPTION 2: if you cannot open a terminal window go to tty6 (or 1-5) by typing &lt;code&gt;Ctrl+Alt+F6&lt;/code&gt; and loging with your username and password, then type &lt;code&gt;DISPLAY=:0 wingpanel &amp;amp;&lt;/code&gt; and go back to your GUI (tty7: &lt;code&gt;Ctrl+Alt+F7&lt;/code&gt;).&lt;/p&gt;&#xA;&lt;p&gt;If &lt;code&gt;ps -ef | grep wingpanel&lt;/code&gt; is showing multiple wingpanel processes running, you may want to stop them all before restarting wingpanel with the beforementioned options: &lt;code&gt;killall wingpanel&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="25818" LastActivityDate="2021-05-10T13:11:24.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27926" PostTypeId="2" ParentId="27862" CreationDate="2021-05-10T14:14:10.370" Score="0" Body="&lt;p&gt;I did it! I now have NVIDIA 460 drivers working perfectly on Odin beta 1.&lt;/p&gt;&#xA;&lt;p&gt;What I did was:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Installed kernel headers with:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-headers-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Installed nvidia drivers with:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install nvidia-drivers-460&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Recreated grub config (thanks for the tip u/Ashtefere)&#xA;&lt;pre&gt;&lt;code&gt;sudo grub-mkconfig -o /boot/efi/EFI/ubuntu/grub/grub.cfg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15272" LastActivityDate="2021-05-10T14:14:10.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27927" PostTypeId="2" ParentId="27920" CreationDate="2021-05-10T15:24:39.420" Score="0" Body="&lt;p&gt;Files code is no longer compatible with Hera unfortunately, it is not just that the valac compiler required is newer, it also depends on libhandy which is not provided by Hera. There are probably other requirements not met.  The best way to develop File is to do it on elementary 6 (beta version now available). You probably want to install it on a separate partition or in a VM as it is not suitable for production use yet.  You can also compile Files on the latest LTS of Ubuntu, I think, but you will need to install the elementary themes otherwise it will not look right.  It would be a good idea the raise the issue as a feature request on &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; to check that what you intend is in line with the UX team opinion.&lt;/p&gt;&#xA;&lt;p&gt;To answer your exact question, you can get all versions of valac from the the vala team ppa page: &lt;a href=&quot;https://launchpad.net/%7Evala-team/+archive/ubuntu/ppa&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://launchpad.net/~vala-team/+archive/ubuntu/ppa&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-05-10T15:24:39.420" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27928" PostTypeId="1" CreationDate="2021-05-10T17:17:41.593" Score="0" ViewCount="28" Body="&lt;p&gt;I am using pCloud and Dropbox for uploading my files. Both services are installed in my computer running elementary OS 5.1.7 Hera. Whenever I add files in any of the service provider folder, there are no signs or tick marks showing the file is uploaded or not. Also, no icons for pCloud or Dropbox are shown in the menu bar of the desktop.&lt;/p&gt;&#xA;" OwnerUserId="23403" LastActivityDate="2021-05-10T17:17:41.593" Title="difficult to know whether files got synchronized or not in a cloud service" Tags="|release-hera|icons|dropbox|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="27931" PostTypeId="2" ParentId="21559" CreationDate="2021-05-11T22:07:38.003" Score="0" Body="&lt;p&gt;To me this looks like a physical defect on the screen panel, not software related, but I could be wrong.&lt;/p&gt;&#xA;&lt;p&gt;Try to choose an all black wallpaper color, not an image but the plain color option,&#xA;see if the spots are showing up or just stays half-lit grey.&#xA;Then do the same with a all-white color background as wallpaper.&lt;/p&gt;&#xA;&lt;p&gt;As for the driver... Indeed it should have been possible to expect that Nvidia 320M  IS Nvidia 320M on both a PC and a Mac. Sadly this is not always the case.&#xA;Just try to search for &amp;quot;Nvidia drivers for Apple MacBook&amp;quot; or similar and you'll get the full story.&lt;/p&gt;&#xA;&lt;p&gt;I've used Linux and Nvidia cards on Apple hardware many times, and if you don't need all the juice from the chip, try installing the latest supported Nouveau driver.&lt;/p&gt;&#xA;&lt;p&gt;Check out &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple/MacBookPro/7-1#GPU_.2F_Nvidia_Geforce_320M&quot; rel=&quot;nofollow noreferrer&quot;&gt;this link from Debian&lt;/a&gt; (of which elementary OS is a descendant).&lt;/p&gt;&#xA;&lt;p&gt;If this gets TLDR; it basically it says that Mesa's &lt;code&gt;nouveau_dri&lt;/code&gt; driver module is your best bet.&lt;/p&gt;&#xA;" OwnerUserId="5621" LastActivityDate="2021-05-11T22:07:38.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27934" PostTypeId="2" ParentId="3566" CreationDate="2021-05-13T08:35:39.510" Score="0" Body="&lt;p&gt;That is zero help. I have a laptop with intel graphics and it needs the intel drivers.Ubuntu 20.04 will not let me download the essential drivers.&lt;/p&gt;&#xA;" OwnerUserId="25844" LastActivityDate="2021-05-13T08:35:39.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27935" PostTypeId="2" ParentId="25279" CreationDate="2021-05-13T09:58:55.020" Score="0" Body="&lt;p&gt;The option to change the number of columns and rows was removed from the launcher. So we can no longer change the launcher size anymore, unfortunately.&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-05-13T09:58:55.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27936" PostTypeId="1" CreationDate="2021-05-13T18:02:40.450" Score="0" ViewCount="78" Body="&lt;p&gt;I have no idea what changed to cause this, but just the day Videos started playing any file I gave it on mute. Other apps are totally unaffected (e.g. Epiphany works as an ugly work around, I can still listen to my music). Restarts did not help.&lt;/p&gt;&#xA;" OwnerUserId="25848" LastEditorUserId="25848" LastEditDate="2021-05-14T07:08:30.387" LastActivityDate="2024-01-31T13:00:20.057" Title="Videos Stopped Playing Audio From Movie Files" Tags="|sound|videos|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27937" PostTypeId="1" CreationDate="2021-05-13T18:04:50.157" Score="0" ViewCount="132" Body="&lt;p&gt;I connect the monitor to my laptop via an hdmi cable.&lt;/p&gt;&#xA;&lt;p&gt;The screen is completely black, but I can see and move the mouse freely, but only the mouse pointer that appears on the external monitor.&lt;/p&gt;&#xA;&lt;p&gt;Laptop screen works great.&lt;/p&gt;&#xA;&lt;p&gt;I tried to change the order of the monitor in the menu, by doing this it &amp;quot;copies&amp;quot; the image from my laptop screen to that of the external monitor, however the external monitor screen is frozen.&lt;/p&gt;&#xA;&lt;p&gt;I already delete the file&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~/.config/monitors.xml&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and reboot the laptop, but that's don't work.&lt;/p&gt;&#xA;&lt;p&gt;How can I solve it?&lt;/p&gt;&#xA;&lt;p&gt;I use a laptop with &lt;strong&gt;nvidia GEFORCE GTX 1650&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tested an Elementary OS iso on a USB drive and the same problem happens.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tested an Ubuntu iso on a USB driver and the system and external monitor work perfectly.&#xA;This can be proof that this is a problem with elementary OS. However I need help on how to report (some kind of log) and how I can get around this problem.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 3&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tested an elementary OS 6 BETA iso on a USB driver and the system and external monitor work perfectly.&#xA;this makes me think it is a problem with the kernel or xorg version.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/h34MX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/h34MX.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;how can i solve this in my current version?&lt;/p&gt;&#xA;" OwnerUserId="18654" LastEditorUserId="18654" LastEditDate="2021-05-19T14:03:55.813" LastActivityDate="2021-05-19T14:03:55.813" Title="external monitor shows only the mouse pointer" Tags="|drivers|nvidia|nvidia-driver|monitors|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="27941" PostTypeId="1" CreationDate="2021-05-14T23:23:00.133" Score="0" ViewCount="36" Body="&lt;p&gt;My computer is glitching and freezing after I use it for a bit. Have checked swap and computer maxes out at 4gb of ram which I have installed already. Any help?&lt;/p&gt;&#xA;" OwnerUserId="25853" LastActivityDate="2024-01-31T00:05:45.777" Title="Computer starts glitching and freezes" Tags="|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27942" PostTypeId="2" ParentId="2351" CreationDate="2021-05-15T10:48:51.653" Score="0" Body="&lt;p&gt;I've just performed a fresh installation of elementaryOS 5.1 (Hera) and had the same problem.  The same as the original poster I copied across my old home area.  Example below:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y2s3M.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y2s3M.png&quot; alt=&quot;Screenshot showing broken icons&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Noting that &lt;code&gt;elementary-tweaks&lt;/code&gt; was discouraged (and seemingly discontinued) I managed to get the elementary icons and theme back by:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;code&gt;gnome-tweaks&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;On the &lt;code&gt;Appearance&lt;/code&gt; tab set the application and icon theme to &lt;code&gt;elementary&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Remove &lt;code&gt;gnome-tweaks&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I hope this helps someone else.&lt;/p&gt;&#xA;" OwnerUserId="25856" LastActivityDate="2021-05-15T10:48:51.653" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27943" PostTypeId="2" ParentId="27941" CreationDate="2021-05-15T10:51:48.837" Score="0" Body="&lt;p&gt;Four gigabytes of RAM seems low these days if you're using a desktop environment, even on Linux, so a RAM upgrade may be a good value, cost effective, improvement.  Did you mean that all 4GB of RAM gets used, as does your swap?&lt;/p&gt;&#xA;&lt;p&gt;Are you able to see &lt;em&gt;what&lt;/em&gt; is using all of your RAM?  Google Chrome is known to use gigs of RAM, particularly if you have many tabs open.  Could you share a few more details about the applications you're running when you have the problem?&lt;/p&gt;&#xA;" OwnerUserId="25856" LastActivityDate="2021-05-15T10:51:48.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27945" PostTypeId="1" CreationDate="2021-05-15T13:01:24.947" Score="0" ViewCount="168" Body="&lt;p&gt;I find myself having to allow updates in the AppCenter two times a day. Is there a way to set AppCenter to automatically update in  the background without asking me?&lt;/p&gt;&#xA;" OwnerUserId="9" LastActivityDate="2021-05-30T06:19:18.170" Title="Auto update everything without asking" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27946" PostTypeId="1" AcceptedAnswerId="27947" CreationDate="2021-05-15T15:06:18.410" Score="1" ViewCount="156" Body="&lt;p&gt;I cannot connect my printer correctly. It is Epson Workforce M100, bought several years ago. It can connect to the modem with a data cable and can be discovered by my system(5.1.7), and it is seen in the printers list. I can pick it but in the next page, where the list of printers are shown, M100 is not listed so I cannot choose a printer.&lt;a href=&quot;https://i.stack.imgur.com/fbK6P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fbK6P.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried to pick a random one but then it just prints out nonsense characters. Also on the Epson site, driver links for M100 are going nowhere and I get a 404. I searched for the missing files but I couldn't find them elsewhere.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;&lt;p&gt;Zey&lt;/p&gt;&#xA;" OwnerUserId="25864" LastActivityDate="2021-07-06T08:54:17.330" Title="How can I add my printer( Epson M100) that is not on the printers list on the system dialog? Its linux drivers in Epson site is also gone (404)" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27947" PostTypeId="2" ParentId="27946" CreationDate="2021-05-15T19:36:49.643" Score="1" Body="&lt;p&gt;I think the driver download site is now up and running (or maybe you were on some other site?). &lt;a href=&quot;https://download.ebz.epson.net/dsc/search/01/search/searchModuleFromResult&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://download.ebz.epson.net/dsc/search/01/search/searchModuleFromResult&lt;/a&gt; shows quite a few downloads available for your model:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Eo8ub.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Eo8ub.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Clicking the download button for the first one, and after accepting Epson's Software License Agreement, I can see a list of available packages:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TaY3P.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TaY3P.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Download &lt;a href=&quot;http://download.ebz.epson.net/dsc/f/01/00/02/09/08/f14ac48ce7e19d8c077153dfe9f496cf0b2a1486/epson-inkjet-printer-201215w_1.0.0-1lsb3.2_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;epson-inkjet-printer-201215w_1.0.0-1lsb3.2_amd64.deb&lt;/a&gt; and install it using dpkg or &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget http://download.ebz.epson.net/dsc/f/01/00/02/09/08/f14ac48ce7e19d8c077153dfe9f496cf0b2a1486/epson-inkjet-printer-201215w_1.0.0-1lsb3.2_amd64.deb &#xA;sudo dpkg -i epson-inkjet-printer-201215w_1.0.0-1lsb3.2_amd64.deb  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Your printer's model should be now present in the add new printer dialog:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ufEav.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ufEav.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Let us know how this works out for you.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2021-07-06T08:54:17.330" LastActivityDate="2021-07-06T08:54:17.330" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="27948" PostTypeId="2" ParentId="27936" CreationDate="2021-05-16T02:36:54.747" Score="0" Body="&lt;p&gt;Solved by clearing Video's state in DConf. Also tried clearing the PulseAudio configuration by deleting the ~/.config/pulse directory, but that didn't appear to have any effect.&lt;/p&gt;&#xA;&lt;p&gt;Not a very precise answer, but it solved my issue!&lt;/p&gt;&#xA;" OwnerUserId="25848" LastActivityDate="2021-05-16T02:36:54.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27949" PostTypeId="2" ParentId="27886" CreationDate="2021-05-16T03:00:46.703" Score="0" Body="&lt;p&gt;You will likely have more success using the link &lt;a href=&quot;https://elementary.io/get-involved#translations&quot; rel=&quot;nofollow noreferrer&quot;&gt;on the “Getting Involved” page&lt;/a&gt; of the Elementary site. Thanks in advance for any contributions you offer &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-16T03:00:46.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27950" PostTypeId="2" ParentId="27896" CreationDate="2021-05-16T12:10:35.190" Score="0" Body="&lt;p&gt;This has happened to me before, since the os is in beta, you can expect these things.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Firstly you can try updating AppCenter trough apt via&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;And try updating again.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;If it still refuses to update, you can also upgrade flatpak in terminal!&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo flatpak update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;These should resolve your issue.&lt;/p&gt;&#xA;&lt;p&gt;Hope I clould help&lt;/p&gt;&#xA;" OwnerUserId="25872" LastActivityDate="2021-05-16T12:10:35.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27952" PostTypeId="2" ParentId="27896" CreationDate="2021-05-16T18:38:59.403" Score="0" Body="&lt;p&gt;I see this is for Elementary OS 6 I am testing the exact system as well, and this has already been fixed.&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2021-05-16T18:38:59.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27955" PostTypeId="1" CreationDate="2021-05-18T16:24:58.560" Score="0" ViewCount="1766" Body="&lt;p&gt;I was searching for a solution on how to use a bluetooh headset on elementary OS without reverting to bad audio quality and stumbled upon this answer: &lt;a href=&quot;https://askubuntu.com/a/1338934/676709&quot;&gt;https://askubuntu.com/a/1338934/676709&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried to follow the instructions to install and setup &lt;code&gt;pipewire&lt;/code&gt; which were mentioned in the answer (&lt;a href=&quot;https://wiki.debian.org/PipeWire&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://wiki.debian.org/PipeWire&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately, I could not run&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# cp /usr/share/doc/pipewire/examples/systemd/user/pipewire-pulse.* /etc/systemd/user/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;because the directory &lt;code&gt;/usr/share/doc/pipewire/examples/systemd&lt;/code&gt; does not exist.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;So I wonder if there is there another possibility to activate &lt;code&gt;pipewire&lt;/code&gt; on elementary OS in order to ultimately use my bluetooth headset properly?&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="9462" LastActivityDate="2021-05-18T16:24:58.560" Title="Activate `pipewire` to use bluetooth headset properly" Tags="|bluetooth|audio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27958" PostTypeId="2" ParentId="2650" CreationDate="2021-05-19T12:42:05.693" Score="1" Body="&lt;p&gt;The problem is once you connect the device, it reverts back to the original name so my headset is called &amp;quot;BH-M91&amp;quot;. I changed it to &amp;quot;BT Headset&amp;quot; restarted the bluetooth service and it was fine. After I connected to &amp;quot;BT Headseet&amp;quot; it reverted back and stayed that way???&lt;/p&gt;&#xA;" OwnerUserId="25887" LastActivityDate="2021-05-19T12:42:05.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27963" PostTypeId="2" ParentId="26570" CreationDate="2021-05-21T00:05:32.143" Score="0" Body="&lt;p&gt;Same problem here. I built a new computer a few days ago using another B550 chipset motherboard. My Gigabyte B550 Aorus Pro V2 also has the Realtek 2.5GbE LAN. I tried Hera 5.1.7 (20200814 build) and did not recognise the network adapter on boot.&lt;/p&gt;&#xA;&lt;p&gt;I did the steps below and I managed to make it recognise the 2.5GbE controller.&lt;/p&gt;&#xA;&lt;p&gt;From &lt;a href=&quot;https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-pci-express-software&quot; rel=&quot;nofollow noreferrer&quot;&gt;Realtek official page&lt;/a&gt; download the &lt;a href=&quot;https://www.realtek.com/en/directly-download?downloadid=95f1076134d28cfcebcb49fc65a6811e&quot; rel=&quot;nofollow noreferrer&quot;&gt;r8125 linux driver&lt;/a&gt;.&#xA;Extract and copy the r8125 driver to your computer with the B550 motherboard.&lt;/p&gt;&#xA;&lt;p&gt;Install &lt;code&gt;make&lt;/code&gt; and &lt;code&gt;gcc&lt;/code&gt; packages from the bootable Elementary USB by issuing the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get install make gcc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After the packages are installed, open a terminal to the directory that contains the extracted drivers and give the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo ./autorun.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If everything went well, the drivers should be installed successfully. You can check if the driver is loaded by using the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ lsmod | grep r8125&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In my case the output was:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;r8125        151552    0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If everything went well, at this point you should have access to the Internet. If not, try to check the &lt;code&gt;README&lt;/code&gt; file in the driver's directory for extra guidance.&lt;/p&gt;&#xA;" OwnerUserId="25898" LastActivityDate="2021-05-21T00:05:32.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27964" PostTypeId="1" CreationDate="2021-05-21T08:26:54.727" Score="0" ViewCount="16" Body="&lt;p&gt;&lt;sub&gt;Translated from original&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;p&gt;Hello, I would like to install Book Crossing Core on Elementary OS running as a VirtualBox VM, but I'm not sure how to install it.&lt;/p&gt;&#xA;&lt;p&gt;The instructions can be found here: &lt;a href=&quot;https://github.com/bookcrossing/bkxng-core&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bookcrossing/bkxng-core&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Can anybody help me?&lt;/p&gt;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;sub&gt;Original&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;p&gt;Bonjour, je souhaite installer Book crossing core sur Elementary installé avec virtual box.&lt;/p&gt;&#xA;&lt;p&gt;Je ne parviens pas à identifier comment l'installer pouvez vous m'aider.&lt;/p&gt;&#xA;&lt;p&gt;Le lien: &lt;a href=&quot;https://github.com/bookcrossing/bkxng-core&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bookcrossing/bkxng-core&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Cordialement,&lt;/p&gt;&#xA;&lt;p&gt;Emmanuel&lt;/p&gt;&#xA;" OwnerUserId="25904" LastEditorUserId="25612" LastEditDate="2021-06-09T20:16:48.493" LastActivityDate="2021-06-09T20:16:48.493" Title="Installation Book Crossing core depuis git" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27965" PostTypeId="1" CreationDate="2021-05-21T08:33:09.243" Score="4" ViewCount="2764" Body="&lt;p&gt;Upon trying to install elementary OS 6 Beta, the installer informs me that the partition I used for boot with Hera is too small.&lt;/p&gt;&#xA;&lt;p&gt;This is on a 2012 Apple MacBook Air (MacBookAir5,2) set up for dual boot. When I installed that, it seems the hidden FAT32 recovery partition (209.7 MB) was used. (For now, Mac OS X remains my daily driver, with elementary as a secondary…for now.)&lt;/p&gt;&#xA;&lt;p&gt;Now, however, the 6 Beta installer says that's too small. What size boot partition does 6 need?&lt;/p&gt;&#xA;&lt;p&gt;(As an aside, was it a terrible idea to let the Hera installer use this hidden recovery partition for boot? Should I instead create a dedicated boot partition for Linux alone?)&lt;/p&gt;&#xA;" OwnerUserId="25905" LastActivityDate="2022-07-23T18:07:30.720" Title="What size boot partition does elementary OS 6 Beta need?" Tags="|macbook|install|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27966" PostTypeId="2" ParentId="17841" CreationDate="2021-05-21T11:48:06.220" Score="0" Body="&lt;p&gt;You can use Linux Live Usb Creator( &lt;a href=&quot;http://www.linuxliveusb.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.linuxliveusb.com&lt;/a&gt; ) but it only supports elementaryos-stable-i386.20130810 with persitence&lt;/p&gt;&#xA;&lt;p&gt;See here :- &lt;a href=&quot;http://www.linuxliveusb.com/en/supported-linuxes&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.linuxliveusb.com/en/supported-linuxes&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25907" LastActivityDate="2021-05-21T11:48:06.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27967" PostTypeId="2" ParentId="27965" CreationDate="2021-05-21T14:02:14.317" Score="1" Body="&lt;p&gt;209MB for a &lt;code&gt;/boot&lt;/code&gt; partition is a little tight. This could make it rather difficult to install kernel updates. Some people are able to get by with a small &lt;code&gt;/boot&lt;/code&gt;, though I tend to keep mine at 1GB in size. This allows for a good deal of breathing room so long as you can afford to forfeit the storage space.&lt;/p&gt;&#xA;&lt;p&gt;As for your second question, it's not a terrible idea to use the recovery partition on a Mac if you are not using macOS very often or do not plan on upgrading the OS. Worst case scenario is that, if you need to re-install macOS from scratch for whatever reason, you make use of the Internet Recovery feature by pressing &lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;Option&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;R&lt;/kbd&gt; at boot time. Restoring macOS will blow away all partitions on the storage device, though, so be sure to have good backups &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-21T14:02:14.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27968" PostTypeId="2" ParentId="27964" CreationDate="2021-05-21T15:53:14.937" Score="1" Body="&lt;p&gt;The GitHub repository that you linked to has not been updated in over five years, so there is a good chance that the software will not work for you. However, it looks like a standard Drupal installation with some custom plugins, so you might be able to install it with a normal LAMP stack.&lt;/p&gt;&#xA;&lt;p&gt;Here's how:&lt;/p&gt;&#xA;&lt;h3&gt;Install the Apache Web Server&lt;/h3&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Update your sources:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Install Apache:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install apache2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;If you are running UFW, allow Apache through:&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw app list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;You will see something like this:&#xA;&lt;pre&gt;&lt;code&gt;Available applications:&#xA;   Apache&#xA;   Apache Full&#xA;   Apache Secure&#xA;   OpenSSH&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Allow Apache to have access:&#xA;&lt;pre&gt;&lt;code&gt;sudo ufw allow in &amp;quot;Apache&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Test Apache is working by visiting &lt;a href=&quot;http://127.0.0.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://127.0.0.1&lt;/a&gt; or &lt;a href=&quot;http://localhost&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost&lt;/a&gt; in your browser. You should see a standard Apache page.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h3&gt;Install the MySQL Database Server&lt;/h3&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install MySQL:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mysql-server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Configure the database server:&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql_secure_installation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;You will be asked for a password, and if you want to remove example accounts and databases. Feel free to answer these questions any way you'd like.&lt;/li&gt;&#xA;&lt;li&gt;Test MySQL by connecting and creating a database and account for Book Crossing:&#xA;&lt;pre&gt;&lt;code&gt;sudo mysql&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;If everything is good, you should now be connected to MySQL:&#xA;&lt;pre&gt;&lt;code&gt;mysql&amp;gt; CREATE DATABASE `drupal` DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_unicode_ci;&#xA;mysql&amp;gt; CREATE USER 'books'@'localhost' IDENTIFIED WITH mysql_native_password BY 'superSecretPassword!123';&#xA;mysql&amp;gt; GRANT ALL ON `drupal`.* TO 'books'@'localhost';&#xA;mysql&amp;gt; FLUSH PRIVILEGES;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sub&gt;&lt;strong&gt;Note:&lt;/strong&gt; Do not copy the &lt;code&gt;mysql&amp;gt;&lt;/code&gt; part. That's just to let you know it's a command for MySQL.&lt;/sub&gt;&lt;/li&gt;&#xA;&lt;li&gt;Exit from MySQL:&#xA;&lt;pre&gt;&lt;code&gt;mysql&amp;gt; exit;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h3&gt;Install PHP&lt;/h3&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install PHP and some common packages:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install php libapache2-mod-php php-mysql php-xml php-json php-mbstring php-gd php-devel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Restart Apache:&#xA;&lt;pre&gt;&lt;code&gt;sudo service apache2 restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Test PHP is working by creating a simple file in the &lt;code&gt;/var/www/html&lt;/code&gt; directory:&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /var/www/html/test.php&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sub&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use any text editor you prefer.&lt;/sub&gt;&lt;br&gt;&#xA;Paste the following code into the new file:&#xA;&lt;pre&gt;&lt;code&gt;&amp;lt;?php phpinfo(); ?&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Save the file.&lt;/li&gt;&#xA;&lt;li&gt;Check that PHP works by visiting &lt;a href=&quot;http://127.0.0.1/test.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://127.0.0.1/test.php&lt;/a&gt; or &lt;a href=&quot;http://localhost/test.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost/test.php&lt;/a&gt; in your browser. You should see a long page describing PHP with all the settings and packages.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h3&gt;Install Book Crossing&lt;/h3&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Make sure you're in &lt;code&gt;/var/www/html&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;cd /var/www/html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Download the &lt;code&gt;.zip&lt;/code&gt; file from GitHub to your &lt;code&gt;/var/www/html&lt;/code&gt; directory:&#xA;&lt;pre&gt;&lt;code&gt;sudo wget https://github.com/bookcrossing/bkxng-core/archive/refs/heads/master.zip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Unzip the file:&#xA;&lt;pre&gt;&lt;code&gt;sudo unzip master.zip&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Change permissions for all files and folders in the &lt;code&gt;html&lt;/code&gt; directory to ensure Apache can access them all:&#xA;&lt;pre&gt;&lt;code&gt;sudo chown -R www-data:www-data /var/www/html&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Start the installation process by visiting &lt;a href=&quot;http://127.0.0.1/install.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://127.0.0.1/install.php&lt;/a&gt; or &lt;a href=&quot;http://localhost/install.php&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://localhost/install.php&lt;/a&gt; in your browser.&lt;/li&gt;&#xA;&lt;li&gt;Follow the steps on the screen, remembering to enter the same MySQL account credentials as you created when testing MySQL earlier.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;There are a lot of steps, but this is not &lt;em&gt;too&lt;/em&gt; difficult so long as you go slow and pay attention the first few times you do this.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-05-21T15:53:14.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27970" PostTypeId="1" CreationDate="2021-05-21T22:04:19.467" Score="0" ViewCount="442" Body="&lt;p&gt;I'm new to Elementary OS, I'm having an issue with the folders. The folders have lock icons and I can't edit or delete or modify any of the files. These are from the Disk partitions, however, I'm able to access files and folders from the user folders like Videos, Documents, Photos, Downloads, etc.&lt;/p&gt;&#xA;&lt;p&gt;When I right click and see the folder permissions, it shows as 777 for the user 'sudeep', which is me.&lt;/p&gt;&#xA;&lt;p&gt;This has started happening from yesterday after installing a system update. I'm not sure what to do now. I've tried several methods such as chmod x+wr, chwon, sudo su, etc. but nothing has worked.&lt;/p&gt;&#xA;&lt;p&gt;Please help.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/58cKd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/58cKd.png&quot; alt=&quot;Screenshot of the folders and their permissions&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25911" LastActivityDate="2024-02-12T20:08:11.103" Title="How to unlock folders?" Tags="|folder|permissions|lock|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27971" PostTypeId="2" ParentId="8660" CreationDate="2021-05-22T09:34:22.977" Score="0" Body="&lt;p&gt;On ElementaryOS 5.1 (Hera) all I needed to do (as with many other newer Ubuntu-based distros) to play DVD-s was:&lt;/p&gt;&#xA;&lt;h3&gt;Pre-requisites (which are probably already done):&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository multiverse&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Required setup:&lt;/h3&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y gstreamer1.0-plugins-ugly gstreamer1.0-plugins-bad&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Usage:&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Insert the DVD.&lt;/li&gt;&#xA;&lt;li&gt;Open the &lt;strong&gt;Files&lt;/strong&gt; app.&lt;/li&gt;&#xA;&lt;li&gt;Click your DVD to load it on the left-hand list of &lt;strong&gt;Devices&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Open the &lt;strong&gt;Videos&lt;/strong&gt; app.&lt;/li&gt;&#xA;&lt;li&gt;Click the &lt;kbd&gt;Play from Disc&lt;/kbd&gt; button in the middle.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="11700" LastActivityDate="2021-05-22T09:34:22.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27972" PostTypeId="1" CreationDate="2021-05-22T09:47:56.750" Score="1" ViewCount="43" Body="&lt;p&gt;Just did a dual boot with Win10 + Elementary. I see the grub2 menu. When i select &lt;em&gt;elementary os&lt;/em&gt; it takes me further and I'm greeted with a  black screen.&lt;/p&gt;&#xA;&lt;p&gt;I figure the gui failed. I can switch to terminal (alt+f1,f2).&lt;/p&gt;&#xA;&lt;p&gt;I see errors like this, i have an nvidia graphics driver.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/9V7Ii.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;installing elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2022-10-20T20:01:25.177" Title="After dual boot with Win10, Elementary shows no gui" Tags="|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27973" PostTypeId="1" CreationDate="2021-05-22T15:35:20.123" Score="0" ViewCount="158" Body="&lt;p&gt;I have installed the application Cisco Packet Tracer 8.0.0 in my elementary OS but when I run it, it only shows the following: &lt;code&gt;Starting Packet Tracer 8.0.0&lt;/code&gt;, and it won't start.&lt;/p&gt;&#xA;&lt;p&gt;It's important to notice that I'm running the version 5.1.7 Hera of elementary OS and all the dependencies for Cisco Packet Tracer are installed.&lt;/p&gt;&#xA;&lt;p&gt;Any thoughts? Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="25915" LastActivityDate="2021-07-08T16:53:46.483" Title="Cisco Packet Tracer 8.0 won't start" Tags="|applications|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27974" PostTypeId="1" AcceptedAnswerId="27975" CreationDate="2021-05-24T07:56:14.070" Score="1" ViewCount="231" Body="&lt;p&gt;I am using elementary OS on acer Swift 3 SF314-55g. It has a Realtek card reader in it, but when I insert an SD card into it nothing happens.&lt;/p&gt;&#xA;&lt;p&gt;Here is the output of lsusb:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 004: ID 04f2:b5c5 Chicony Electronics Co., Ltd HD WebCam&#xA;Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller&#xA;Bus 001 Device 002: ID 1c7a:0570 LighTuning Technology Inc. EgisTec Touch Fingerprint Sensor&#xA;Bus 001 Device 005: ID 8087:0aaa Intel Corp. &#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So the system does recognize it but it does not work for some reason.&lt;/p&gt;&#xA;&lt;p&gt;Can someone please tell me how to fix this?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-05-24T10:01:46.953" Title="Realtek RTS5129 Card Reader not working" Tags="|release-hera|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27975" PostTypeId="2" ParentId="27974" CreationDate="2021-05-24T10:01:46.953" Score="2" Body="&lt;p&gt;I followed the steps in the link below and my card reader started working.&#xA;&lt;a href=&quot;https://github.com/asymingt/rts5139&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/asymingt/rts5139&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-05-24T10:01:46.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27976" PostTypeId="2" ParentId="27788" CreationDate="2021-05-25T01:39:23.640" Score="1" Body="&lt;p&gt;SOLVED&lt;/p&gt;&#xA;&lt;p&gt;All I had to do was restart.  And then hit F12 BEFORE the GRUB menu showed up, in order to get my bootable drive to show up.&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-05-25T01:39:23.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27978" PostTypeId="1" CreationDate="2021-05-25T19:49:34.070" Score="0" ViewCount="89" Body="&lt;p&gt;I just switched to Elementary OS and love it!&lt;/p&gt;&#xA;&lt;p&gt;I've gotten rid of apps that it comes with, either through the App Center or using terminal commands, and also following various article suggestions.&lt;/p&gt;&#xA;&lt;p&gt;I have the latest version of Elementary OS and have been using Linux for ~6 months (pic below of the Multitasking View and Stopwatch &amp;amp; Timer apps).  Any help is greatly appreciated!!!&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/suOsy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/suOsy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2024-02-16T13:01:50.220" Title="Can't uninstall Multitasking View and Stopwatch and Timer Apps" Tags="|appcenter|multitasking-view|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27979" PostTypeId="1" CreationDate="2021-05-27T14:10:17.460" Score="0" ViewCount="19" Body="&lt;p&gt;Olá, Utilizo o Elementary e preciso de ajuda para instalar o Forticlient VPN para acesso remoto na minha empresa.&lt;/p&gt;&#xA;" OwnerUserId="25962" LastActivityDate="2024-02-12T11:02:50.283" Title="Suporte para instalação de software" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27981" PostTypeId="2" ParentId="27979" CreationDate="2021-05-28T06:05:07.207" Score="0" Body="&lt;p&gt;Olá, you can follow the documentation for Ubuntu 18.04 on this page &lt;a href=&quot;https://www.fortinet.com/support/product-downloads/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fortinet.com/support/product-downloads/linux&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Olá, pode seguir a documentação para o Ubuntu 18.04 nesta página &lt;a href=&quot;https://www.fortinet.com/support/product-downloads/linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.fortinet.com/support/product-downloads/linux&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25966" LastActivityDate="2021-05-28T06:05:07.207" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27983" PostTypeId="2" ParentId="27972" CreationDate="2021-05-28T15:09:11.907" Score="1" Body="&lt;p&gt;Try disabling fast boot in bios and windows.&#xA;Try reinstalling elementary OS with a freshly flashed USB stick.&lt;/p&gt;&#xA;&lt;p&gt;Make sure the SHA256 matched with the ISO file you downloaded. This makes sure the ISO is not corrupted.&lt;/p&gt;&#xA;&lt;p&gt;Steps on how to do that are here: &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25744" LastEditorUserId="25744" LastEditDate="2021-05-28T18:00:07.837" LastActivityDate="2021-05-28T18:00:07.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27984" PostTypeId="2" ParentId="27970" CreationDate="2021-05-28T15:40:05.233" Score="0" Body="&lt;p&gt;As @matigo said, Disabling fastboot in Windows is a possible fix.&lt;/p&gt;&#xA;&lt;p&gt;Windows:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Control Panel&lt;/li&gt;&#xA;&lt;li&gt;Power Options&lt;/li&gt;&#xA;&lt;li&gt;Choose what the power buttons do.&lt;/li&gt;&#xA;&lt;li&gt;Change settings that are currently unavailable.&lt;/li&gt;&#xA;&lt;li&gt;Click Turn on fast startup (recommended) so that the checkmark disappears.&lt;/li&gt;&#xA;&lt;li&gt;Save changes.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Shutdown and then boot into elementary OS. The files should be unlocked now. If not, boot into Windows and restart into elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-05-28T15:40:05.233" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27985" PostTypeId="2" ParentId="27978" CreationDate="2021-05-28T16:32:23.663" Score="0" Body="&lt;p&gt;Multitasking view is not an app but just a button to switch to multitasking view. As far as I know, it can't be removed.&lt;/p&gt;&#xA;&lt;p&gt;You can use the following command to find the relevant package for the stopwatch &amp;amp; timer app as I don't seem to have the app on my system.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt list --installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can also try this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Files with administrator privileges. (Right Click on icon.)&lt;/li&gt;&#xA;&lt;li&gt;Type &lt;code&gt;/opt&lt;/code&gt; in the address bar.&lt;/li&gt;&#xA;&lt;li&gt;Delete the application you want.&lt;/li&gt;&#xA;&lt;li&gt;Go to &lt;code&gt;/home/abrattic/.local/share/applications&lt;/code&gt; or &lt;code&gt;/usr/share/applications&lt;/code&gt; and delete the *.desktop file of relevant program.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="25744" LastEditorUserId="25744" LastEditDate="2021-06-01T08:55:27.793" LastActivityDate="2021-06-01T08:55:27.793" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="27986" PostTypeId="1" AcceptedAnswerId="28039" CreationDate="2021-05-28T21:39:26.497" Score="0" ViewCount="182" Body="&lt;p&gt;I installed elementary os just a few days ago primarily to use the Screen Time and Limits function, to improve my own sleep hygiene.  I got Screen Time and Limits to auto log-off/shutdown at bedtime the 1st night.&lt;/p&gt;&#xA;&lt;p&gt;On the 2nd night when it didn't work I tried toggling my account, weekdays, and weekend sections on and off, as well as adjusting the times, but to no avail.&lt;/p&gt;&#xA;&lt;p&gt;Googling the issue led me to a few very old articles that were no longer relevant and I couldn't find it listed either, I was hoping I could uninstall and reinstall it (using the command:  apt list --installed).  I feel like the issue is having to do with something very basic, an oversight on my end perhaps.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;using the latest version of elementary os&lt;/li&gt;&#xA;&lt;li&gt;am only using the &amp;quot;screen time&amp;quot; section of Screen Time &amp;amp; Limits&lt;/li&gt;&#xA;&lt;li&gt;I'm the only one using the pc&lt;/li&gt;&#xA;&lt;li&gt;have been using linux for ca. 6 months, know just the basics&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/b6CeG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/b6CeG.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25591" LastEditorUserId="25591" LastEditDate="2021-09-15T18:11:50.373" LastActivityDate="2021-09-15T18:11:50.373" Title="Screen Time and Limits stopped working" Tags="|settings|pantheon|time|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27987" PostTypeId="2" ParentId="16646" CreationDate="2021-05-29T00:58:09.483" Score="0" Body="&lt;p&gt;Addendum to the &lt;a href=&quot;https://elementaryos.stackexchange.com/a/16734/25930&quot;&gt;post&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Solution in Ansible:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;- name: Disable suspend and hibernate&#xA;  when:&#xA;    - ansible_system == 'Linux'&#xA;  become: yes&#xA;  block:&#xA;    - systemd:&#xA;        name: &amp;quot;{{ item }}&amp;quot;&#xA;        enabled: no&#xA;        masked: yes&#xA;      with_items:&#xA;        - sleep.target&#xA;        - suspend.target&#xA;        - hibernate.target&#xA;        - hybrid-sleep.target&#xA;    - replace:&#xA;        path: /etc/default/acpi-support&#xA;        regexp: '^(SUSPEND_METHODS=)[^\n]+$'&#xA;        replace: '\g&amp;lt;1&amp;gt;&amp;quot;none&amp;quot;'&#xA;        backup: yes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25930" LastActivityDate="2021-05-29T00:58:09.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27988" PostTypeId="1" CreationDate="2021-05-29T09:32:37.760" Score="0" ViewCount="114" Body="&lt;p&gt;I use a Macbook pro 16 I tried to install Elementary OS and I haven’t been able to 1 my keyboard did not work 2 my toucpad or mouse did either work. Is there a fix for that soon. I do not have a secondary computer so I hope there will come a fix for all that.&lt;/p&gt;&#xA;" OwnerUserId="25970" LastActivityDate="2024-02-17T17:05:35.677" Title="Keyboard &amp; touchpad and mouse" Tags="|keyboard|touchpad|mouse|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="27989" PostTypeId="1" CreationDate="2021-05-29T15:29:12.643" Score="0" ViewCount="74" Body="&lt;p&gt;After installing NVidia graphics, I am facing a strange issue. I had my external display connected when the drivers installed. And now my Primary display is gone.&#xA;When I disconnect the external display, nothing comes up on the primary display of my laptop.&lt;/p&gt;&#xA;&lt;p&gt;However, when I have display2 connected, I can see the login screen and everything works.&lt;/p&gt;&#xA;&lt;p&gt;What might I be doing wrong? I'm seeing something like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Ak8o4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/Ak8o4.jpg&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2024-02-18T07:05:55.710" Title="Primary display fails" Tags="|release-hera|dual-boot|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27990" PostTypeId="1" CreationDate="2021-05-29T20:04:40.960" Score="0" ViewCount="282" Body="&lt;p&gt;I am new to elementary os but have used ubuntu for a long time.&lt;/p&gt;&#xA;&lt;p&gt;I have use gnome-sessions as my vnc server option through the settings - Sharing, especially because this option works without requiring sudo.&lt;/p&gt;&#xA;&lt;p&gt;Does elementary os come with any native VNC server?&lt;/p&gt;&#xA;" OwnerUserId="25971" LastActivityDate="2022-05-22T15:11:53.247" Title="option like gnome-sessions on elementary os" Tags="|vnc|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27991" PostTypeId="2" ParentId="27945" CreationDate="2021-05-30T06:19:18.170" Score="1" Body="&lt;p&gt;As of elementary OS 5.1, packages in AppCenter are just APT packages (unless you've also &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;set up&lt;/a&gt; your AppCenter to work with Flatpak packages).&lt;/p&gt;&#xA;&lt;h3&gt;Auto-update APT packages using a CRON job&lt;/h3&gt;&#xA;&lt;p&gt;You can auto-update all your APT packages on a schedule using a CRON job:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open root's crontab file (we use root because the APT commands require root access):&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo crontab -e&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Append this line to the end of the crontab file:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;0 7,19 * * * (apt update &amp;amp;&amp;amp; apt -y upgrade) &amp;gt; /dev/null&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Note the following:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;This command is set to run daily at 7am and 7pm. If you need guidance with writing CRON expressions, search online for a CRON expression generator such as &lt;a href=&quot;https://crontab.cronhub.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;The command will run APT as root to update and upgrade your packages. Any output (e.g. information, warnings, or errors) from these commands are discarded.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;With this solution, you will still see update notifications from App Center throughout the day -- but they will be installed automatically on the schedule you set.&lt;/p&gt;&#xA;" OwnerDisplayName="user25972" LastActivityDate="2021-05-30T06:19:18.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27992" PostTypeId="1" AcceptedAnswerId="27993" CreationDate="2021-05-31T07:15:48.150" Score="1" ViewCount="111" Body="&lt;p&gt;Im using a Dell G3 3590 laptop, and I want to use it to work, but I would like to use my 2 monitors and have the laptop closed, do you know if this is possible?&lt;/p&gt;&#xA;" OwnerUserId="25976" LastActivityDate="2021-05-31T08:08:37.637" Title="Can i use Elementary with the laptop close?" Tags="|settings|laptop|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27993" PostTypeId="2" ParentId="27992" CreationDate="2021-05-31T08:08:37.637" Score="0" Body="&lt;p&gt;Yes you can.&#xA;You'll just have to edit &lt;code&gt;/etc/systemd/logind.conf&lt;/code&gt; and change the default behaviour for the lid sensor.&#xA;Open Terminal and type&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/systemd/logind.conf  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;input your password, and look for the line containing &lt;strong&gt;HandleLidSwitch&lt;/strong&gt;. Uncomment it and replace &lt;code&gt;suspend&lt;/code&gt; with &lt;code&gt;ignore&lt;/code&gt;, so that is looks like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ESc7n.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ESc7n.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Use &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;O&lt;/kbd&gt; to save the file, and &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;X&lt;/kbd&gt; to close the editor. Now all that's left is to apply the new configuration with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl restart systemd-logind.service  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now, when you close the lid, the laptop will no longer enter suspend.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2021-05-31T08:08:37.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27994" PostTypeId="1" CreationDate="2021-05-31T12:55:35.843" Score="0" ViewCount="47" Body="&lt;p&gt;Is there a way to configure the AppCenter to check for updates at an interval of my choosing? Also, is there a way to configure it to notify me that updates are available without first downloading them?&lt;/p&gt;&#xA;" OwnerUserId="25981" LastActivityDate="2024-02-18T11:06:55.767" Title="AppCenter Updates" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27995" PostTypeId="1" CreationDate="2021-05-31T16:49:37.003" Score="1" ViewCount="125" Body="&lt;p&gt;The OS is perfect, today I installed Elementary OS to test it, the system is very practical and beautiful, but it would be better with the minimize button.&lt;/p&gt;&#xA;" OwnerUserId="25983" LastActivityDate="2024-03-20T18:02:35.293" Title="Minimize button" Tags="|updates|applications|user-interface|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27997" PostTypeId="1" CreationDate="2021-06-01T11:41:43.430" Score="0" ViewCount="28" Body="&lt;p&gt;I've got my laptop installed with Windows 10 and Elementary OS. First I installed Windows and second Elementary OS so I get a boot menu from Elementary OS. I have got an external mouse connected on a USB drive and when I start the laptop with the mouse connected, the bootmenu does not respond to keyboard input. When I disconnect the mouse and restart the laptop, the problem is solved.&lt;/p&gt;&#xA;&lt;p&gt;It is not only the mouse, it is with every external USB device.&lt;/p&gt;&#xA;&lt;p&gt;The laptop is a 2019 HP Spectre X360.&lt;/p&gt;&#xA;&lt;p&gt;I hope somebody can help me solve this problem.&lt;/p&gt;&#xA;&lt;p&gt;Andy&lt;/p&gt;&#xA;" OwnerUserId="25987" LastEditorUserId="25987" LastEditDate="2021-06-01T12:20:30.543" LastActivityDate="2022-02-14T16:05:25.553" Title="Bootmenu hangs on laptop when exteral USB device is connected" Tags="|dual-boot|laptop|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27998" PostTypeId="2" ParentId="18630" CreationDate="2021-06-01T15:13:07.030" Score="0" Body="&lt;p&gt;Go to sound settings and choose the appropriate output device.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-01T15:13:07.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="27999" PostTypeId="2" ParentId="27995" CreationDate="2021-06-01T15:19:48.583" Score="0" Body="&lt;p&gt;You can use elementary tweaks or pantheon tweaks (Odin 6.0) to bring minimize buttons back.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-01T15:19:48.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28000" PostTypeId="2" ParentId="26231" CreationDate="2021-06-02T04:40:27.540" Score="0" Body="&lt;p&gt;Look, my answer i'snt probably gonna take your question in consideration just your problem. Sorry about that, but I think will help you.&lt;br&gt;&lt;br&gt;I also have a Ryzen 7 (4800h) laptop (Lenovo Legion 5 15ARH05H) (I'm currently writing in it) and had the same issues (I even tried a few distros and a lot of them worked well but had a newer kernel).&lt;br&gt;&lt;br&gt;The HWE kernel was loaded and running so no more solution from the system, then I thought that I needed a newer version and I use to use the mainline app to install newer versions. Here's a few steps of what I did&#xA;&lt;br /&gt;&lt;br /&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;First, boot and press &lt;kbd&gt;ESC&lt;/kbd&gt; or &lt;kbd&gt;SHIFT&lt;/kbd&gt; to get &lt;a href=&quot;/questions/tagged/grub&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;grub&amp;#39;&quot; rel=&quot;tag&quot;&gt;grub&lt;/a&gt; menu&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the &lt;code&gt;elementary&lt;/code&gt; entry and press &lt;kbd&gt;E&lt;/kbd&gt;, look for the linux line and at the end add a space and the number 3&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;then press &lt;kbd&gt;F10&lt;/kbd&gt; to boot into elementary but into text mode&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;login into the system&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;execute: &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;install &lt;a href=&quot;/questions/tagged/git&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;git&amp;#39;&quot; rel=&quot;tag&quot;&gt;git&lt;/a&gt;: &lt;code&gt;sudo apt install git&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;create a working directory named git in your home and enter into it: &lt;code&gt;cd &amp;amp;&amp;amp; mkdir git &amp;amp;&amp;amp; cd git&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;execute: &lt;code&gt;git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;enter into the directory: &lt;code&gt;cd linux-firmware/amdgpu/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;copy missing raven (renoir in my case, raven I believe is yours) libs: &lt;code&gt;sudo cp raven* /lib/firmware/amdgpu/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;you probably have some others missing like rtl_nic, copy them if you want but at the moment are not necessary and you can do it later&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;install software-properties-common: &lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;install this &lt;a href=&quot;https://github.com/bkw777/mainline&quot; rel=&quot;nofollow noreferrer&quot;&gt;ppa&lt;/a&gt; and the &lt;code&gt;mainline&lt;/code&gt; package:&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:cappelikan/ppa&#xA;sudo apt update&#xA;sudo apt install mainline&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Now install the &lt;a href=&quot;/questions/tagged/kernel&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;kernel&amp;#39;&quot; rel=&quot;tag&quot;&gt;kernel&lt;/a&gt; I'm using, I haven't tried another one (at that moment I just picked the newest 5.9 because I remembered I read something in another distro's forum about that branch that was solved) and with the latest I got a lot of warnings and I didn't want to try it yet&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mainline --install 5.9.16&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Install the &lt;a href=&quot;/questions/tagged/touchpad&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;touchpad&amp;#39;&quot; rel=&quot;tag&quot;&gt;touchpad&lt;/a&gt; drivers: &lt;code&gt;sudo apt install xserver-xorg-input-synaptics-hwe-18.04&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h2&gt;If you have an Nvidia GPU continue with the next steps, if not then just use the system normally&lt;/h2&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Again, boot and press &lt;kbd&gt;ESC&lt;/kbd&gt; or &lt;kbd&gt;SHIFT&lt;/kbd&gt; to get grub menu&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Select the &lt;code&gt;elementary&lt;/code&gt; entry and press &lt;kbd&gt;E&lt;/kbd&gt;, look for the linux line and at the end add a space and the number 3&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;then press &lt;kbd&gt;F10&lt;/kbd&gt; to boot into elementary but into text mode&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;login into the system&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install &lt;a href=&quot;/questions/tagged/nvidia&quot; class=&quot;post-tag&quot; title=&quot;show questions tagged &amp;#39;nvidia&amp;#39;&quot; rel=&quot;tag&quot;&gt;nvidia&lt;/a&gt; drivers: &lt;code&gt;sudo apt install nvidia-driver-460&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;just in case run: &lt;code&gt;sudo update-initramfs -u&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot and boot normally&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Hope it helps&lt;/p&gt;&#xA;" OwnerUserId="14940" LastEditorUserId="14940" LastEditDate="2021-06-02T05:37:51.557" LastActivityDate="2021-06-02T05:37:51.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28001" PostTypeId="2" ParentId="27994" CreationDate="2021-06-02T11:40:34.283" Score="0" Body="&lt;p&gt;At least on Odin 6 beta, updates not installed without permission. I don't think you can schedule updates too.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T11:40:34.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28002" PostTypeId="2" ParentId="27990" CreationDate="2021-06-02T11:46:20.360" Score="1" Body="&lt;p&gt;Elementary OS comes with the least amount of software needed for someone not familiar with Linux so it is easy for them. So, no. You can try using TightVNCServer. It is quite popular and you can easily find guides on how to use it on the internet.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T11:46:20.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28003" PostTypeId="2" ParentId="27752" CreationDate="2021-06-02T11:49:30.320" Score="0" Body="&lt;p&gt;This may be able to help you: &lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=337744&quot; rel=&quot;nofollow noreferrer&quot;&gt;Linux Mint Forums: Failed to set MokListRT: Invalid Parameter&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T11:49:30.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28004" PostTypeId="2" ParentId="27988" CreationDate="2021-06-02T11:55:06.713" Score="0" Body="&lt;p&gt;This may be able to help you: &lt;a href=&quot;https://apple.stackexchange.com/a/310324&quot;&gt;Keyboard and touchpad are not working.&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You will have to manually install some drivers and patches.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T11:55:06.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28005" PostTypeId="2" ParentId="27986" CreationDate="2021-06-02T12:24:23.863" Score="2" Body="&lt;p&gt;Try creating a different account as an administrator and change your current account to a standard account. This feature is basically supposed to be for kids with standard(non-administrator) accounts so this may fix it.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T12:24:23.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28006" PostTypeId="2" ParentId="27989" CreationDate="2021-06-02T12:29:04.957" Score="0" Body="&lt;p&gt;Go to settings&amp;gt;display and try fixing your displays there. This may just be a nvidia driver issue or an issue with elementary OS. If the above does not work, open a bug in the elementary Github repository.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-02T12:29:04.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28007" PostTypeId="2" ParentId="24792" CreationDate="2021-06-02T23:38:49.737" Score="0" Body="&lt;p&gt;You can turn keyboard lights on in the terminal by typing &lt;code&gt;xset led 3&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Turn them off with: &lt;code&gt;xset led off&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="25994" LastEditorUserId="84" LastEditDate="2021-08-10T16:10:00.353" LastActivityDate="2021-08-10T16:10:00.353" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28008" PostTypeId="1" CreationDate="2021-06-03T05:22:38.977" Score="0" ViewCount="164" Body="&lt;p&gt;There is black screen with login prompt. After typing my credentials I enter terminal and see my files.&lt;/p&gt;&#xA;&lt;p&gt;How to fix that problem and go back to usual desktop&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/23NFw.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/23NFw.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xdqQq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xdqQq.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13306" LastActivityDate="2024-01-22T17:08:30.967" Title="After boot black screen appears" Tags="|boot|pantheon-terminal|desktop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28009" PostTypeId="1" CreationDate="2021-06-03T13:15:33.670" Score="1" ViewCount="61" Body="&lt;p&gt;I can't boot from usb cuz this error:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/cpguW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cpguW.jpg&quot; alt=&quot;that error&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And I am don't know why this error appears. Thank you&lt;/p&gt;&#xA;" OwnerUserId="25997" LastEditorUserId="25997" LastEditDate="2021-06-03T13:47:17.617" LastActivityDate="2024-02-19T01:04:15.460" Title="I can't boot elementary OS from usb" Tags="|usb|filesystem|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28010" PostTypeId="2" ParentId="28009" CreationDate="2021-06-03T16:23:53.893" Score="0" Body="&lt;p&gt;Try downloading the file again and verify the checksum. Instructions are in the &lt;a href=&quot;https://elementary.io/docs/installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;installation guide&lt;/a&gt;.&#xA;You can also try flashing a different USB flash drive.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-03T16:23:53.893" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28011" PostTypeId="1" CreationDate="2021-06-03T20:32:56.030" Score="0" ViewCount="580" Body="&lt;p&gt;all! I've got the elementaryos 6 Beta running on my Lenovo Flex and got an error message while trying to update, starting a few days ago:&lt;/p&gt;&#xA;&lt;p&gt;Failed to update “Operating System Updates”&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    The following packages have unmet dependencies:&#xA;  pantheon-online-accounts-plugin-lastfm: Depends: switchboard-plug-online-accounts (= 2.0.1+r925+pkg63~daily~ubuntu6.1) but 3.0.0+r46+pkg65~daily~ubuntu6.1 is to be installed&#xA;  pantheon-online-accounts-plugin-fastmail: Depends: switchboard-plug-online-accounts (= 2.0.1+r925+pkg63~daily~ubuntu6.1) but 3.0.0+r46+pkg65~daily~ubuntu6.1 is to be installed&#xA;  pantheon-online-accounts-plugin-mail: Depends: switchboard-plug-online-accounts (= 2.0.1+r925+pkg63~daily~ubuntu6.1) but 3.0.0+r46+pkg65~daily~ubuntu6.1 is to be installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Not certain if this is a problem with something I've done or what - any help would be appreciated! Should I just apt get install the 3.0.0+r46+pkg65~daily~ubuntu6.1 package and see if that fixes it?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&lt;p&gt;Mark&lt;/p&gt;&#xA;" OwnerUserId="25427" LastActivityDate="2024-02-19T13:09:16.167" Title="Failed to update “Operating System Updates”" Tags="|ubuntu|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28012" PostTypeId="2" ParentId="28011" CreationDate="2021-06-04T09:52:26.597" Score="0" Body="&lt;p&gt;Try &lt;code&gt;sudo apt full-upgrade&lt;/code&gt;.&#xA;Full-upgrade performs the function of upgrade but may also remove installed packages if that is required in order to resolve a package conflict. Check and accept this answer if this works for you. Make a comment if this does not work.&lt;/p&gt;&#xA;" OwnerUserId="25744" LastActivityDate="2021-06-04T09:52:26.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28013" PostTypeId="1" CreationDate="2021-06-05T00:47:40.727" Score="2" ViewCount="1395" Body="&lt;p&gt;I'm having some troubles with installing a new kernel on my Elementary OS installation. I've installed the 5.11 kernel, and it's installed successfully, but the option to boot into the new kernel isn't showing up in grub. I've tried looking elsewhere and tried grub-update and other commands to try and update the boot options, but they still don't show up. Now, I am running the Elementary OS 6 Beta, so there may be some problems there, but I figured I'd ask in case anyone has a solution or has seen this happen in other versions of Elementary OS or other distros. Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="26000" LastActivityDate="2021-06-29T10:57:03.507" Title="New kernel boot option not showing up in grub" Tags="|updates|boot|grub|kernel|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28014" PostTypeId="1" CreationDate="2021-06-05T11:42:05.020" Score="0" ViewCount="89" Body="&lt;p&gt;Trying to use &lt;code&gt;libhandy&lt;/code&gt; and &lt;code&gt;Hdy.ApplicationWindow&lt;/code&gt; instead of &lt;code&gt;Gtk.ApplicationWindow&lt;/code&gt; in my &lt;strong&gt;vala&lt;/strong&gt; based application made for &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary OS&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;My Problem&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;While using &lt;code&gt;Hdy.ApplicationWindow&lt;/code&gt; and &lt;code&gt;Hdy.HeaderBar&lt;/code&gt; instead of &lt;code&gt;Gtk.ApplicationWindow&lt;/code&gt; and &lt;code&gt;Gtk.HeaderBar&lt;/code&gt;, I am unable to make the application window move by dragging the &lt;code&gt;HeaderBar&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;I can move the window in my workspace by dragging the &lt;code&gt;Gtk.HeaderBar&lt;/code&gt; but not in case of &lt;code&gt;Hdy.HeaderBar&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In &lt;code&gt;Hdy.HeaderBar&lt;/code&gt; I am forced to press the &lt;code&gt;super&lt;/code&gt; key and drag to make the window move.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;Source Code of the Application&lt;/h1&gt;&#xA;&lt;pre&gt;&lt;code&gt;public class Application : Gtk.Application {&#xA;    protected override void activate () {   &#xA;        //Gtk.ApplicationWindow app_window = new Gtk.ApplicationWindow (this);&#xA;             &#xA;        var gtk_settings = Gtk.Settings.get_default ();&#xA;        var hdy_window = new Hdy.ApplicationWindow ();&#xA;        var header_bar = new Hdy.HeaderBar ();&#xA;        var overlaybar = new Granite.Widgets.OverlayBar ();&#xA;        &#xA;        hdy_window.application = this;&#xA;&#xA;        var dark_mode_switch = new Granite.ModeSwitch.from_icon_name (&#xA;            &amp;quot;display-brightness-symbolic&amp;quot;,&#xA;            &amp;quot;weather-clear-night-symbolic&amp;quot;&#xA;        );&#xA;        &#xA;        //New Document&#xA;        var welcome_page = new Granite.Widgets.Welcome (&amp;quot;Ordne&amp;quot;, &amp;quot;A simple Pomodoro Timer.&amp;quot;);&#xA;        welcome_page.append (&amp;quot;document-open-recent&amp;quot;, &amp;quot;Start Working&amp;quot;, &amp;quot;Begin the Working Countdown.&amp;quot;);&#xA;        welcome_page.append (&amp;quot;preferences-system&amp;quot;, &amp;quot;Pomodoro Preferences&amp;quot;, &amp;quot;Change Break and Working Duration&amp;quot;);&#xA;        &#xA;        var grid_welcome = new Gtk.Grid () {&#xA;            orientation = Gtk.Orientation.VERTICAL&#xA;        };  &#xA;&#xA;        dark_mode_switch.primary_icon_tooltip_text = (&amp;quot;Light background&amp;quot;);&#xA;        dark_mode_switch.secondary_icon_tooltip_text = (&amp;quot;Dark background&amp;quot;);&#xA;        dark_mode_switch.valign = Gtk.Align.CENTER;&#xA;        dark_mode_switch.bind_property (&amp;quot;active&amp;quot;, gtk_settings, &amp;quot;gtk-application-prefer-dark-theme&amp;quot;, GLib.BindingFlags.BIDIRECTIONAL);&#xA;&#xA;        header_bar.show_close_button = true;&#xA;        header_bar.title = &amp;quot;Ordne&amp;quot;;&#xA;        header_bar.pack_end(dark_mode_switch);  &#xA;        &#xA;        grid_welcome.add(header_bar);&#xA;        grid_welcome.add(welcome_page);       &#xA;        &#xA;        hdy_window.window_position = Gtk.WindowPosition.CENTER;&#xA;        hdy_window.set_default_size(1200, 700);&#xA;        hdy_window.add(grid_welcome);&#xA;        //main_window.set_titlebar(header_bar);&#xA;        //main_window.add(grid_welcome); //Adds the welcome grid to the window&#xA;        &#xA;        //hdy_window.add (main_window);&#xA;        hdy_window.show_all();&#xA;        //main_window.show_all();&#xA;    }&#xA;&#xA;    public static int main (string[] args) {&#xA;        return new Application ().run (args);&#xA;    }    &#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;How does it look?&lt;/h1&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B1DA0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B1DA0.png&quot; alt=&quot;How does my App Look?&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h1&gt;What did I try?&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Referring to &lt;a href=&quot;https://valadoc.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala Documentation&lt;/a&gt;, more focused at Docs related to &lt;a href=&quot;https://valadoc.org/libhandy-1/Hdy.HeaderBar.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;Hdy.HeaderBar&lt;/code&gt;&lt;/a&gt; and &lt;a href=&quot;https://valadoc.org/libhandy-1/Hdy.ApplicationWindow.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;Hdy.ApplicationWindow&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Understanding the way &lt;code&gt;libhandy&lt;/code&gt; has been used to implement rounded corners in Elementary OS by referring to -&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/orgs/elementary/projects/75&quot; rel=&quot;nofollow noreferrer&quot;&gt;Round all Corners in Elementary OS Project&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Understanding code changes in pull requests related to Rounding corners (implementing LibHandy) in Elementary OS &lt;a href=&quot;https://github.com/elementary/appcenter/pull/1434/files/f101001ff7eb77d8ec3251caa723aa9b4c1bcafe&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppCenter&lt;/a&gt;, &lt;a href=&quot;https://github.com/elementary/camera/pull/131/files/7db5bee8673d07806e9442fb5052a5a91a0c7003&quot; rel=&quot;nofollow noreferrer&quot;&gt;Camera&lt;/a&gt; and &lt;a href=&quot;https://github.com/elementary/calendar/pull/604/files/b17d98f41364a05ff457c2a61ac3bf050ab8f4c8&quot; rel=&quot;nofollow noreferrer&quot;&gt;Calendar&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Looking forward to publish this application with an MIT License to the Elementary AppCenter. This Application's GitHub Repo is at &lt;a href=&quot;https://github.com/candiedoperation/ordne&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/candiedoperation/ordne&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have made an Electron Based Launcher For Linux (Like macOS Spotlight). Despite being electron it integrates really well and follows the Elementary OS Human Interface Guidelines. You can know more at &lt;a href=&quot;https://gitlab.com/candiedoperation/fliger&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.com/candiedoperation/fliger&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TJFF8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TJFF8.png&quot; alt=&quot;Fliger at GitLab&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;P.S. AppCenter publishes only native apps, unable to share it with the Elementary OS Community.&lt;/p&gt;&#xA;" OwnerUserId="26005" LastActivityDate="2024-01-12T04:09:51.133" Title="Unable to move Hdy.ApplicationWindow by dragging Hdy.HeaderBar in Vala" Tags="|vala|gtk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28017" PostTypeId="2" ParentId="28008" CreationDate="2021-06-06T14:33:25.570" Score="0" Body="&lt;h2&gt;Step 1&lt;/h2&gt;&#xA;&lt;p&gt;Manually start Xorg:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;startx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This might successfully start the display server but, more likely, it will fail and give you an error that might help identify the problem.&lt;/p&gt;&#xA;&lt;p&gt;If an error is thrown which references a particular package that rings a bell (e.g. a recently-installed graphics driver), do an &lt;code&gt;apt purge&lt;/code&gt; on it and reboot before proceeding to the next step (if still needed).&lt;/p&gt;&#xA;&lt;h2&gt;Step 2&lt;/h2&gt;&#xA;&lt;p&gt;Remove these configuration files and clear the user cache (Optionally, rename them instead to serve as backup):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rm .ICEauthority&#xA;rm .Xauthority&#xA;rm -rf .cache&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then reboot.&lt;/p&gt;&#xA;&lt;h2&gt;References&lt;/h2&gt;&#xA;&lt;p&gt;Information on what these config files do:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/300682/what-is-the-xauthority-file&quot;&gt;https://askubuntu.com/questions/300682/what-is-the-xauthority-file&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://askubuntu.com/questions/439455/what-is-the-role-of-the-iceauthority-file&quot;&gt;https://askubuntu.com/questions/439455/what-is-the-role-of-the-iceauthority-file&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user25972" LastActivityDate="2021-06-06T14:33:25.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28018" PostTypeId="2" ParentId="25439" CreationDate="2021-06-07T00:31:00.580" Score="0" Body="&lt;p&gt;I get trought of snap. Follow this link:&#xA;&lt;a href=&quot;https://snapcraft.io/install/anki-woodrow/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/install/anki-woodrow/elementary&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26011" LastActivityDate="2021-06-07T00:31:00.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28020" PostTypeId="2" ParentId="26539" CreationDate="2021-06-07T04:15:16.463" Score="0" Body="&lt;p&gt;To have the brightness control back, you need to install as minimum the kernel version 5.11.7&lt;/p&gt;&#xA;&lt;p&gt;The easier way is through a software named mainline-gtk (or just mainline if you want to use the console)&lt;/p&gt;&#xA;&lt;p&gt;Follow their instructions to install it, here's the link&#xA;&lt;br&gt;&lt;br&gt;&lt;a href=&quot;https://github.com/bkw777/mainline&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/bkw777/mainline&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Also you will probably have some warnings about missing kernel libraries in &lt;code&gt;/lib/firmware&lt;/code&gt;&#xA;To &amp;quot;fix&amp;quot; this, just clone the kernel repo (link below) and then copy the files you need (get them from the warnings)&#xA;&lt;br&gt;&lt;br&gt;&lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;And finally (here's the actual fix) you need to add a line in grub, that's only available from that kernel version onwards&lt;/p&gt;&#xA;&lt;p&gt;add in &lt;code&gt;/etc/defaults/grub&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX=&amp;quot;amdgpu.backlight=0&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then reboot&lt;/p&gt;&#xA;" OwnerUserId="14940" LastActivityDate="2021-06-07T04:15:16.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28022" PostTypeId="1" CreationDate="2021-06-07T12:58:00.897" Score="0" ViewCount="31" Body="&lt;p&gt;newbie here who's been trying to install jekyll on elementary os (5.1.7 Hera) according to &lt;a href=&quot;https://jekyllrb.com/docs/installation/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; documentation. It all looks good up until I try &lt;code&gt;gem install jekyll bundler&lt;/code&gt; at which point I get the following error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ERROR:  While executing gem ... (NoMethodError)&#xA;    undefined method `each' for &amp;quot;A YAML array of remote gem repositories to install gems from&amp;quot;:String&#xA;    /usr/lib/ruby/2.5.0/rubygems/source_list.rb:73:in `replace'&#xA;    /usr/lib/ruby/2.5.0/rubygems/source_list.rb:39:in `from'&#xA;    /usr/lib/ruby/2.5.0/rubygems.rb:1001:in `sources'&#xA;    /usr/lib/ruby/2.5.0/rubygems/spec_fetcher.rb:58:in `initialize'&#xA;    /usr/lib/ruby/2.5.0/rubygems/spec_fetcher.rb:43:in `new'&#xA;    /usr/lib/ruby/2.5.0/rubygems/spec_fetcher.rb:43:in `fetcher'&#xA;    /usr/lib/ruby/2.5.0/rubygems/resolver/installer_set.rb:38:in `initialize'&#xA;    /usr/lib/ruby/2.5.0/rubygems/dependency_installer.rb:445:in `new'&#xA;    /usr/lib/ruby/2.5.0/rubygems/dependency_installer.rb:445:in `resolve_dependencies'&#xA;    /usr/lib/ruby/2.5.0/rubygems/commands/install_command.rb:194:in `install_gem'&#xA;    /usr/lib/ruby/2.5.0/rubygems/commands/install_command.rb:255:in `block in install_gems'&#xA;    /usr/lib/ruby/2.5.0/rubygems/commands/install_command.rb:251:in `each'&#xA;    /usr/lib/ruby/2.5.0/rubygems/commands/install_command.rb:251:in `install_gems'&#xA;    /usr/lib/ruby/2.5.0/rubygems/commands/install_command.rb:158:in `execute'&#xA;    /usr/lib/ruby/2.5.0/rubygems/command.rb:313:in `invoke_with_build_args'&#xA;    /usr/lib/ruby/2.5.0/rubygems/command_manager.rb:173:in `process_args'&#xA;    /usr/lib/ruby/2.5.0/rubygems/command_manager.rb:143:in `run'&#xA;    /usr/lib/ruby/2.5.0/rubygems/gem_runner.rb:59:in `run'&#xA;    /usr/bin/gem:21:in `&amp;lt;main&amp;gt;'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Anyone know what might be going on here? Anyone had success installing jekyll on elementary os? Please pardon what I guess is a very basic question...&lt;/p&gt;&#xA;" OwnerUserId="26017" LastActivityDate="2021-06-07T15:21:02.320" Title="Installing Jekyll on Elementary OS" Tags="|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28023" PostTypeId="2" ParentId="28022" CreationDate="2021-06-07T15:21:02.320" Score="1" Body="&lt;p&gt;I tried to replicate your issue by doing a fresh install of Ruby and Jekyll using the installation instructions you linked. I didn't have the problem you encountered.&lt;/p&gt;&#xA;&lt;p&gt;That said, I would try the following:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Try &lt;code&gt;gem install jekyll&lt;/code&gt; and &lt;code&gt;gem install bundler&lt;/code&gt; separately. Does the problem come up in both or just one?&lt;/li&gt;&#xA;&lt;li&gt;Try uninstalling jekyll and bundler (if installed), clearing your gem paths (as described in the accepted answer &lt;a href=&quot;https://stackoverflow.com/questions/8304552/error-while-executing-gem-nomethoderror-undefined-method-spec-for-niln&quot;&gt;here&lt;/a&gt;), then reinstalling jekyll and bundler.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;h2&gt;Additional Note&lt;/h2&gt;&#xA;&lt;p&gt;Your question appears to be related primarily to Ruby. If your issue persists, I think you might get help more easily by searching or asking on the Stack Overflow site (or a Ruby-specific alternative).&lt;/p&gt;&#xA;" OwnerDisplayName="user25972" LastActivityDate="2021-06-07T15:21:02.320" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28026" PostTypeId="2" ParentId="8192" CreationDate="2021-06-08T14:34:57.547" Score="0" Body="&lt;p&gt;I have a problem like you&lt;/p&gt;&#xA;&lt;p&gt;you need open terminal and do this command :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install packagekit&#xA;sudo dpkg --configure -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When you run &amp;quot;sudo dpkg --configure -a&amp;quot; the system need your new enroll key machine type and retype&lt;/p&gt;&#xA;&lt;p&gt;after that viola!! your appcenter running well again!!&lt;/p&gt;&#xA;" OwnerUserId="26031" LastEditorUserId="26" LastEditDate="2021-06-09T20:15:52.220" LastActivityDate="2021-06-09T20:15:52.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28027" PostTypeId="2" ParentId="26277" CreationDate="2021-06-08T17:31:26.983" Score="0" Body="&lt;p&gt;OK DUDES &amp;amp; DUDESS'S! I got you..&#xA;I had the exact same issue, and I finally found this on a reddit post.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;sudo apt-get dist-upgrade&#xA;sudo apt-get autoremove&#xA;sudo apt-get clean&#xA;sudo apt-get build-dep build-essential&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;last one is the trick!! enter all in terminal, with your password, and awesome..&lt;/p&gt;&#xA;" OwnerUserId="26036" LastEditorUserId="26" LastEditDate="2021-06-09T20:16:22.127" LastActivityDate="2021-06-09T20:16:22.127" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28028" PostTypeId="2" ParentId="22412" CreationDate="2021-06-08T17:35:29.820" Score="0" Body="&lt;p&gt;type -&amp;gt; steam on your terminal&lt;/p&gt;&#xA;&lt;p&gt;if your problem is like this -&amp;gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;tar: This does not look like a tar archive&#xA;xz: (stdin): File format not recognized&#xA;tar: Child returned status 1&#xA;tar: Error is not recoverable: exiting now&#xA;find: ‘/home/jacob/.steam/ubuntu12_32/steam-runtime’: No such file or directory&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then you can simply try this command -&amp;gt;&lt;/p&gt;&#xA;&lt;p&gt;mkdir /home/jacob/.steam/ubuntu12_32/steam-runtime&lt;/p&gt;&#xA;" OwnerUserId="26034" LastActivityDate="2021-06-08T17:35:29.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28029" PostTypeId="1" CreationDate="2021-06-09T09:45:47.407" Score="1" ViewCount="22" Body="&lt;p&gt;R studio was working perfectly, but I had to format the computer. I reinstalled Elementary OS and Rstudio again, the icon appears, but the program does not run. what to do?&lt;/p&gt;&#xA;" OwnerUserId="26048" LastActivityDate="2021-07-30T07:00:07.077" Title="installed program that did not run" Tags="|applications|software-installation|appcenter|install|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28030" PostTypeId="2" ParentId="24212" CreationDate="2021-06-09T19:17:32.480" Score="0" Body="&lt;p&gt;Did a little research on this one because of having some stuttering issues when I'm connected with any speaker/headset on the Huawei Matebook d15. After troubleshooting, updating, and re-installing the Bluetooth hardware none worked.&lt;/p&gt;&#xA;&lt;p&gt;What I found out was an online article that &lt;strong&gt;some laptops are using the same frequency for wifi and Bluetooth connection which causes interference&lt;/strong&gt;, I did some experimenting on my own, and when the laptop doesn't use the wifi the stuttering is gone..&lt;/p&gt;&#xA;&lt;p&gt;Some solution that I stumbled upon was changing the wifi bandwidth connection of my router. So I connected my laptop to the 5ghz and tried listening to some music, it helped a little when the wifi traffic is not heavy, but it did not totally eliminate the stuttering. My last hope is to buy a Bluetooth adapter online, hoping it will have a smooth connection. Will comment back again if none worked and if the Bluetooth adapter works smoothly.&lt;/p&gt;&#xA;&lt;p&gt;*Not an expert in computer hardware, but I hope it gave you some idea, just assuming the research that I did is correct hahah. This issue is a hassle!&lt;/p&gt;&#xA;" OwnerUserId="26057" LastActivityDate="2021-06-09T19:17:32.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28031" PostTypeId="1" CreationDate="2021-06-09T23:56:32.940" Score="0" ViewCount="61" Body="&lt;p&gt;So basically I have noticed that the keyboard layout was not set up correctly, and this possibly happened before I have set up the encryptor. I don't want to turn off the computer until I find a way to make it sure that the password was written correctly, I don't want to get locked out (even though I could eventually guess the password, because max two characters were swapped, but idk how many guesses the encryptor gives me).&lt;/p&gt;&#xA;&lt;p&gt;Or is there a way to like disable this completely? That would be the best because I though this is the same as a user account, and thats the onl reason I have set it up&lt;/p&gt;&#xA;" OwnerUserId="26059" LastEditorUserId="26059" LastEditDate="2021-06-10T00:02:47.597" LastActivityDate="2021-06-10T06:52:04.003" Title="How to reset the encryptor password?" Tags="|full-disk-encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28032" PostTypeId="2" ParentId="28031" CreationDate="2021-06-10T06:47:02.363" Score="1" Body="&lt;p&gt;There is a CLI Way of doing it but, I recommend the GUI Way as it is easier and prevents human error.&lt;/p&gt;&#xA;&lt;p&gt;Steps to reproduce:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Install GNOME Disks (Preinstalled in ubuntu but not on elmentary) by executing &lt;code&gt;sudo apt install gnome-disk-utility&lt;/code&gt; in the terminal&#xA;&lt;a href=&quot;https://i.stack.imgur.com/XeFcM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XeFcM.png&quot; alt=&quot;GNOME Disks Install&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &lt;code&gt;Disks&lt;/code&gt; from the Applications Menu and selected the LVM2 Partition (Highlighted Below)&#xA;&lt;a href=&quot;https://i.stack.imgur.com/GXcuG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/GXcuG.png&quot; alt=&quot;GNOME D1&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the small settings-gear icon and click &lt;code&gt;change passphrase&lt;/code&gt; to change your encryption password&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0opEo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0opEo.png&quot; alt=&quot;GNOME D2&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Completed&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;P.S. &lt;code&gt;Change Passphrase&lt;/code&gt; is disabled in the below screenshot as my drive is unencrypted.&lt;/p&gt;&#xA;" OwnerUserId="26005" LastEditorUserId="26005" LastEditDate="2021-06-10T06:52:04.003" LastActivityDate="2021-06-10T06:52:04.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28034" PostTypeId="2" ParentId="19446" CreationDate="2021-06-10T08:09:36.957" Score="0" Body="&lt;p&gt;I do have a laptop with dual graphics: discrete gtx 1050 nvidia and integrated intel. After update I've got 460 over 450 nvidia driver version the strange thing happened: while I'm using nvidia card everything works just fine, however after choosing the intel one by issuing &lt;code&gt;sudo prime-select intel&lt;/code&gt; and restarting the system I'm able to type my password to log in, however as soon as I get logged in mouse/touchpad and keyboard stop working completely. The only solution to hard reset and upon login session press &lt;code&gt;CTRL + ALT + F1&lt;/code&gt; to get into tty and from there type &lt;code&gt;sudo prime-select nvidia&lt;/code&gt; then type &lt;code&gt;reboot&lt;/code&gt;. It's not a perfect solution though! It limits the possibility to use integrated intel graphics which is much less consumable on battery. How to solve the problem properly? ps. elementary os hera 5.1&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-06-10T08:09:36.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28035" PostTypeId="2" ParentId="26522" CreationDate="2021-06-10T19:19:14.287" Score="0" Body="&lt;p&gt;For a system snapshot you can use the TimeShift program and for a simple data backup, the DejaDup program. In these videos you can learn more about this topic.&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=nbly4RS_EZc&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=nbly4RS_EZc&lt;/a&gt;&#xA;&lt;a href=&quot;https://www.youtube.com/watch?v=xX0sqBYfIh0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=xX0sqBYfIh0&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26079" LastActivityDate="2021-06-10T19:19:14.287" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28036" PostTypeId="2" ParentId="26522" CreationDate="2021-06-11T02:38:31.230" Score="0" Body="&lt;p&gt;Most if not all of your UI settings should be saved in &lt;code&gt;/home/&amp;lt;username&amp;gt;/.config&lt;/code&gt;. As the other answers have noted, maintaining a version of your home directory should be sufficient, either by a separate partition, or a backup of the whole folder.&lt;/p&gt;&#xA;&lt;p&gt;If it is a separate partition, you'll need to inform the installer that there is already an existing &lt;code&gt;/home&lt;/code&gt; partition during the installation process. This way it will simply use the existing files and all.&lt;/p&gt;&#xA;&lt;p&gt;However, I suggest against migrating your UI settings to the 6.0 install as there are definitely some differences introduced in 6.0.&lt;/p&gt;&#xA;&lt;p&gt;For me personally, I just backup my working files regularly using a cloud service like pCloud. My settings are not part of the things I backup -- I do this to prevent incompatibilities between current version vs newer version (which was what I did when migrating from Loki to Juno and subsequently Hera).&lt;/p&gt;&#xA;&lt;p&gt;If I have to work with a separate &lt;code&gt;/home&lt;/code&gt; partition or migrated &lt;code&gt;/home&lt;/code&gt; directory I would remove everything in &lt;code&gt;/home/&amp;lt;username&amp;gt;/.config&lt;/code&gt; and &lt;code&gt;/home/&amp;lt;username&amp;gt;/.cache&lt;/code&gt; before I install the new OS.&lt;/p&gt;&#xA;&lt;p&gt;For UI settings, just take 30 minutes after a fresh install to configure it manually. It's a chore but it saves you from having to deal with errors/quirks from incompatible settings, or if the settings behave differently in the newer version.&lt;/p&gt;&#xA;" OwnerUserId="9152" LastActivityDate="2021-06-11T02:38:31.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28038" PostTypeId="1" CreationDate="2021-06-11T14:45:05.657" Score="0" ViewCount="23" Body="&lt;p&gt;I have integrated intel and discrete nvidia graphics. After an update my input stopped working while I'm using intel as soon as I log into desktop environment. Looks like updating nvidia drivers from 450 to 460 version broke something. When nvidia card in use there are no issues.I've tried to reinstall xorg input but it didn't help. Is it possible to bring it back to life without reinstalling the os?&lt;/p&gt;&#xA;" OwnerUserId="643" LastActivityDate="2024-04-01T07:06:35.773" Title="Input (keyboard/mouse/touch pad) doesn't work while on integrated graphics" Tags="|release-hera|keyboard|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28039" PostTypeId="2" ParentId="27986" CreationDate="2021-06-12T23:46:28.877" Score="0" Body="&lt;p&gt;I went ahead and used your suggestion abrattic and it worked. Thank you for your help.&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-06-12T23:46:28.877" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28040" PostTypeId="1" CreationDate="2021-06-13T03:40:24.700" Score="0" ViewCount="72" Body="&lt;p&gt;I've been using the AppCenter versions of applications when they're available, figuring your devs made sure they worked  with the idiosyncrasies of elementary OS. However, the recent upgrade resulted in an unusable browser (image attached)&lt;a href=&quot;https://i.stack.imgur.com/j1cDo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/j1cDo.png&quot; alt=&quot;Elementary OS AppCenter version of Firefox 89 fails on rendering all web pages&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I uninstalled the version from AppCenter and installed the real one in the Ubuntu repository via Synaptic and, Bob's your uncle, I'm in business.&lt;/p&gt;&#xA;&lt;p&gt;If you have the same problem, save a backup of your profile (bookmarks, history, etc.) or make sure Sync is working--I lost mine.&lt;/p&gt;&#xA;" OwnerUserId="26107" LastActivityDate="2024-04-06T02:06:20.760" Title="Firefox 89.0 blanks the top of the viewport--but only installed from the AppCenter" Tags="|appcenter|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28041" PostTypeId="2" ParentId="28038" CreationDate="2021-06-13T14:03:52.000" Score="0" Body="&lt;p&gt;This is what solved the input troubles for me:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;choose &lt;code&gt;on-demand&lt;/code&gt; option in nvidia prime-profile and reboot&lt;/li&gt;&#xA;&lt;li&gt;choose &lt;code&gt;intel&lt;/code&gt; option from the prime-profile and reboot&lt;/li&gt;&#xA;&lt;li&gt;that's it: strangely enough keyboard/touch pad are working while in on integrated intel graphics.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="643" LastActivityDate="2021-06-13T14:03:52.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28044" PostTypeId="1" CreationDate="2021-06-13T20:33:39.603" Score="0" ViewCount="545" Body="&lt;p&gt;I am currently running the early access OS 6 on a Raspberry Pi 4 with the Argon One M.2 case, and booting from the M.2 SSD.  When I have the SSD connected to either USB 3 port of the Pi, then I cannot connect to any wifi network, though it does still list the network. It simply times out and fails to connect.  However if I switch it over to either of the USB 2 ports then all works perfectly.&lt;/p&gt;&#xA;&lt;p&gt;I also tried booting into Raspberry OS with the same setup (from the M.2 SSD).  That works fine.&lt;/p&gt;&#xA;&lt;p&gt;I have seen discussions on other websites about known issues with the USB 3 standard and wifi, but I do not think this is the problem here, because Raspberry OS works.&lt;/p&gt;&#xA;&lt;p&gt;Could this be that Elementary OS is drawing more power, so maybe I need a larger power adapter?  I have no other clues as to what is causing this issue.&lt;/p&gt;&#xA;" OwnerUserId="26112" LastActivityDate="2024-02-29T20:07:25.967" Title="Raspberry Pi 4 Wifi not connecting with USB 3 SSD" Tags="|wifi|usb|ssd|raspberry-pi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28045" PostTypeId="1" CreationDate="2021-06-14T01:14:13.140" Score="0" ViewCount="316" Body="&lt;p&gt;I'm trying to install elementary OS on raid0.  My ESP, of course, is not part of the raid, but rather a separate partition near the beginning of one of the disks.  I boot into the live ISO, download mdadm, then assemble my raid (raid0 striped across four nvmes).  The install goes great and system files get downloaded and copied onto the raid just fine.  However, things take a bad turn when grub tries to install the bootloader on ESP.  Here is output from the install journal.  As you might guess, boot partition is on /dev/nvme1n1p1 and root is on /dev/md125.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Jun 14 00:14:29 elementary grub-installer: info: grub-install does not support --no-floppy&#xA;Jun 14 00:14:29 elementary grub-installer: info: Running chroot /target grub-install  --force &amp;quot;/dev/nvme1n1p1&amp;quot;&#xA;Jun 14 00:14:29 elementary grub-installer: Installing for x86_64-efi platform.&#xA;Jun 14 00:14:30 elementary grub-installer: grub-install: error: disk `md125' not found.&#xA;Jun 14 00:14:30 elementary grub-installer: error: Running 'grub-install  --force &amp;quot;/dev/nvme1n1p1&amp;quot;' failed.&#xA;Jun 14 00:14:32 elementary nm-applet[27236]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jun 14 00:14:32 elementary nm-applet[27236]: gtk_widget_destroy: assertion 'GTK_IS_WIDGET (widget)' failed&#xA;Jun 14 00:14:32 elementary nm-applet[27236]: Can't set a parent on widget which has a parent&#xA;Jun 14 00:14:43 elementary ubiquity[29013]: Reverting lockdown of the desktop environment.&#xA;Jun 14 00:14:43 elementary activate-dmraid: No Serial ATA RAID disks detected```&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26113" LastEditorUserId="26129" LastEditDate="2021-06-26T11:26:52.940" LastActivityDate="2021-06-26T11:27:15.293" Title="SOLVED GRUB fatal error during install on RAID" Tags="|grub|install|error|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28046" PostTypeId="2" ParentId="28044" CreationDate="2021-06-14T14:48:50.310" Score="0" Body="&lt;p&gt;For clarification: if you boot from the USB2 using your SSD, do both of the other USB3 drives continue to work as expected for other purposes (e.g., will other flash drives or devices work at high speeds in the USB3 ports)?.  Will wifi work as expected when the USB3 ports are being used?&lt;/p&gt;&#xA;&lt;p&gt;P.S. I have heard that wifi 2.4 won't work when anything is plugged into USB3, but wifi 5.0 still works.  According to the following link, this is a known issue: &lt;a href=&quot;https://github.com/raspberrypi/firmware/issues/1430&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/raspberrypi/firmware/issues/1430&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26119" LastEditorUserId="26119" LastEditDate="2021-06-14T15:16:16.497" LastActivityDate="2021-06-14T15:16:16.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28048" PostTypeId="2" ParentId="12452" CreationDate="2021-06-14T17:24:33.727" Score="0" Body="&lt;p&gt;On Elementary OS 5.1.7 Hera, there is a file &lt;code&gt;/etc/lightdm/io.elementary.greeter.conf&lt;/code&gt; that has the line &lt;code&gt;#activate-numlock=true&lt;/code&gt;. Simply uncomment the line (remove the hash symbol from the start of the line) and the numlock should now be enabled on the login screen. It stays enabled after login as well.&lt;/p&gt;&#xA;" OwnerUserId="26121" LastActivityDate="2021-06-14T17:24:33.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28049" PostTypeId="1" CreationDate="2021-06-14T21:42:47.730" Score="0" ViewCount="1738" Body="&lt;p&gt;Will fractional scaling like 1.5 and 1.25 come with base 6 updates? Because Elementary cannot be used on devices with a resolution of 2160 x 1440 (3:2). Changing dconf-editor and font sizes does nothing work. I can't use my favorite distro.&lt;/p&gt;&#xA;" OwnerUserId="26122" LastActivityDate="2024-01-29T04:03:45.387" Title="Will fractional scaling happen in Elementary 6?" Tags="|display|scaling|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28051" PostTypeId="2" ParentId="28040" CreationDate="2021-06-15T15:09:57.007" Score="0" Body="&lt;p&gt;I also have the same problem. I have tried installing various ways, however, the problem doesn't go away. On firefox windows support, they suggested to start the browser in troubleshoot mode. If the problem goes away, they think it is caused due to some add-on active. I have disabled all the add-ons and the problem still persist. You may try if it works. (Help ==&amp;gt; Restart in troubleshoot mode)&lt;/p&gt;&#xA;" OwnerUserId="26127" LastActivityDate="2021-06-15T15:09:57.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28052" PostTypeId="2" ParentId="28045" CreationDate="2021-06-15T15:12:58.817" Score="0" Body="&lt;p&gt;A quick update: I've reinstalled Elementary OS, and made it a bit farther.  This time I did the following:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;booted into the live ISO,&lt;/li&gt;&#xA;&lt;li&gt;installed mdadm and assembled the raid where root will reside,&lt;/li&gt;&#xA;&lt;li&gt;successfully ran the installer from commandline: ubiquity -b (using the -b switch runs the installer, but will not install the bootloader, which is where I was encountering errors before)&lt;/li&gt;&#xA;&lt;li&gt;copied resolv.conf from live ISO to the corresponding location on the new install so I can download additional packages from the internet once in chroot environment&lt;/li&gt;&#xA;&lt;li&gt;chroot into the new install&lt;/li&gt;&#xA;&lt;li&gt;installed mdadm and grub-efi-amd64 packages in the new chroot environment&lt;/li&gt;&#xA;&lt;li&gt;ran grub-update and grub-install&lt;/li&gt;&#xA;&lt;li&gt;rebooted&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Now I at least get the grub prompt.  I haven't had time to work through grub prompt to set root and boot directories yet.  Also, I am much more familiar with systemd-boot than grub, but would like to work through this issue with grub.  So I'm looking for guidance on what I might have done wrong and why I'm booting to the grub prompt, and how I might adjust the grub install so that I can boot directly into the grub menu.&lt;/p&gt;&#xA;" OwnerUserId="26119" LastActivityDate="2021-06-15T15:12:58.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28053" PostTypeId="2" ParentId="28049" CreationDate="2021-06-15T16:26:16.197" Score="0" Body="&lt;p&gt;No, but:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;In elementary OS 6, we now scale default widgets spacing, corner radii, etc. with text size, eliminating a lot of that awkwardness. It’s not quite perfect, but it will make elementary OS much more legible for more people without incurring the performance penalty associated with traditional fractional scaling. And we’re happy to have a more first-class experience for those who need larger text.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.elementary.io/look-and-feel-changes-elementary-os-6/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.elementary.io/look-and-feel-changes-elementary-os-6/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26128" LastActivityDate="2021-06-15T16:26:16.197" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28054" PostTypeId="2" ParentId="28045" CreationDate="2021-06-15T21:46:10.437" Score="1" Body="&lt;p&gt;I got it to work... I must have done something incorrect when I installed grub the first time.  After much internet searching, I found someone who had done something similar and I partially followed their instructions &lt;a href=&quot;https://gist.github.com/umpirsky/6ee1f870e759815333c8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/umpirsky/6ee1f870e759815333c8&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26129" LastEditorUserId="26" LastEditDate="2021-06-26T11:27:15.293" LastActivityDate="2021-06-26T11:27:15.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28056" PostTypeId="1" CreationDate="2021-06-16T02:14:16.107" Score="0" ViewCount="344" Body="&lt;p&gt;Hoping to get help with two quick questions. I'm moving from MacOS to Elementary so fairly new to the Linux world&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I flashed ElementaryOS based on installation instructions and then booted my Macbook. I see EFI Boot for 2 out of 3 options. Is doing EFI boot okay and safe to do? I was able to start the installation guide from EFI, but wanted to know if any risks came with this&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;I played around in live mode before going ahead and doing full install of Elementary and I couldn't get wifi to work. I only saw three options: 1) Wired 2)VPN 3)Proxy.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I saw another post where the OP outlined that these instructions worked: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/16102/no-wifi-on-macbook-pro-mid-2010/24789#24789&quot;&gt;No wifi on Macbook Pro mid 2010&lt;/a&gt;. Will be trying this out, but curious to know if this could be something else.&lt;/p&gt;&#xA;&lt;p&gt;Thanks everyone.&lt;/p&gt;&#xA;" OwnerUserId="26131" LastActivityDate="2023-12-30T16:02:30.427" Title="Wifi Option not showing up + Boot Method" Tags="|wifi|macbook|elementary-website|efi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28059" PostTypeId="2" ParentId="28056" CreationDate="2021-06-17T04:45:28.170" Score="0" Body="&lt;p&gt;I just today installed eOS 6 (beta 2) on a mid-2010 MacBook Pro, specifically model MacBookPro 7,1. To get the wifi options to show up, I followed these steps:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Remove the bcmwl-kernel-source package (if you installed it), then reboot:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;    sudo apt-get remove --purge bcmwl-kernel-source&#xA;    reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Install the b43 broadcom firmware:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;    sudo apt-get install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;3&quot;&gt;&#xA;&lt;li&gt;Reload the package&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;    sudo modprobe -r b43&#xA;    sudo modprobe b43&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should now see the wifi options appear. Source: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11783/elementary-os-on-macbook-wont-display-wifi-settings-how-do-i-fix&quot;&gt;Elementary OS on Macbook won&amp;#39;t display wifi settings. How do i fix?&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And I also selected the EFI boot, that should be a fine way to go.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-06-17T04:45:28.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28064" PostTypeId="1" CreationDate="2021-06-18T13:10:18.177" Score="0" ViewCount="233" Body="&lt;p&gt;I just installed prospect mail using snap and I cannot figure out how to launch it. I searched for information on how to launch Prospect Mail and all I found was to use Activities Overview. I don't believe this was an eOS specific answer since I cannot find any such window. Prospect does not show up in the Applications pane either.&lt;/p&gt;&#xA;" OwnerUserId="26149" LastActivityDate="2023-12-16T20:02:25.313" Title="I just installed prospect mail using snap and I cannot figure out how to launch it" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28066" PostTypeId="2" ParentId="855" CreationDate="2021-06-18T16:21:53.173" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;code&gt;dconf-editor&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;navigate to &lt;code&gt;/org/gnome/desktop/sound/allow-volume-above-100-percent&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;set it &lt;code&gt;true&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;You can't set it from UI but from keyboard shortcut or volume function key&lt;/p&gt;&#xA;" OwnerUserId="632" LastActivityDate="2021-06-18T16:21:53.173" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28067" PostTypeId="1" AcceptedAnswerId="28070" CreationDate="2021-06-18T22:12:05.690" Score="0" ViewCount="57" Body="&lt;p&gt;I have no problem accessing and using my NAS data/files in &amp;quot;Files&amp;quot;, but when I try to use them with apps I can't see them?&#xA;How can I mount/map network drive (preferably auto-mount at boot), so that it is visible and usable, please?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-06-18T22:32:45.213" LastActivityDate="2021-06-19T11:35:09.130" Title="mounting NAS share to be accesible from apps?" Tags="|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28069" PostTypeId="2" ParentId="27743" CreationDate="2021-06-19T00:11:26.093" Score="0" Body="&lt;p&gt;Same issue; it's now June 18, 2021. Would be nice to get some support on this. I'd love to demo this OS. I have same graphics card: NVIDIA. So this issue may be related to that card.&lt;/p&gt;&#xA;" OwnerUserId="26157" LastActivityDate="2021-06-19T00:11:26.093" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28070" PostTypeId="2" ParentId="28067" CreationDate="2021-06-19T11:35:09.130" Score="0" Body="&lt;p&gt;sorted...&#xA;by adding following line to fstab:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;//192.168.1.101/My_data     /media/synologymount    cifs    credentials=/home/username/pswd,iocharset=utf8,vers=1.0      0      0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;following advice here:&#xA;&lt;a href=&quot;https://youtu.be/v2WMnZoiGog&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/v2WMnZoiGog&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Having said so - is there perhaps an easier way of doing it in elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-06-19T11:35:09.130" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28073" PostTypeId="1" CreationDate="2021-06-20T09:48:32.603" Score="0" ViewCount="157" Body="&lt;p&gt;I would like to install Elementary IO on an old (2015) MacBook Pro, but at this time, I would also like to keep MacOS installed, along with all associated files.&lt;br /&gt;&#xA;I believe I can create a separate boot partition to run Elementary, but as I am a newbie to this, I want to make sure I don't lose any data or otherwise corrupt my disk.&#xA;Is there a resource which can guide me through this process as well as give me a good background on how I should think about configurations?&lt;/p&gt;&#xA;" OwnerUserId="26166" LastActivityDate="2024-03-14T09:00:14.477" Title="Using Elementary IO on an old MacBook Pro in dual boot mode" Tags="|dual-boot|macbook|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28075" PostTypeId="2" ParentId="28040" CreationDate="2021-06-20T10:57:06.977" Score="0" Body="&lt;p&gt;Seems to be the problem only with that specific version. I have Firefox installed through snap and changing the channel to latest/beta solved the issue.&lt;/p&gt;&#xA;" OwnerUserId="26168" LastActivityDate="2021-06-20T10:57:06.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28077" PostTypeId="1" CreationDate="2021-06-21T01:23:03.247" Score="1" ViewCount="170" Body="&lt;p&gt;I switched recently to elementaryOS. It just works fine but it crashes while watching YouTube videos. Sound starts repeating and machine become unresponsive. Or sound goes on but machine is unresponsive. In either case I have to restart. This happens almost everyday. Any recommendations?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I'm trying to read the crash dump. So far no luck! Based on this &lt;a href=&quot;https://stackoverflow.com/a/40912668/593308&quot;&gt;answer&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I found offset with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo od -t x1 -A d /boot/vmlinuz-5.4.0-77-generic | grep &amp;quot;1f 8b 08&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;which seems to be like &lt;code&gt;0018864 8f 1f 8b 08 00 00 00 00 00 02 03 ec dd 79 7c 15&lt;/code&gt;, therefore offset is &lt;em&gt;0018864+1&lt;/em&gt;. So creating the vmlinux like so;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dd if=/boot/vmlinuz-5.4.0-77-generic bs=1 skip=18865 | zcat &amp;gt; /tmp/vmlinux-5.4.0-77&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and extract dump into a folder&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apport-unpack /var/crash/_usr_lib_x86_64-linux-gnu_io.elementary.cerbere.1000.crash /tmp/crash/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;produces below.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; $ ls -la /tmp/crash/&#xA; total 26016&#xA; drwxr-xr-x  2 root root     4096 Jul  4 16:01 .&#xA; drwxrwxrwt 16 root root     4096 Jul  4 16:08 ..&#xA; -rw-r--r--  1 root root        5 Jul  4 16:01 Architecture&#xA; -rw-r--r--  1 root root 26558464 Jul  4 16:01 CoreDump&#xA; -rw-r--r--  1 root root        8 Jul  4 16:01 CurrentDesktop&#xA; -rw-r--r--  1 root root       24 Jul  4 16:01 Date&#xA; -rw-r--r--  1 root root       19 Jul  4 16:01 DistroRelease&#xA; -rw-r--r--  1 root root       47 Jul  4 16:01 ExecutablePath&#xA; -rw-r--r--  1 root root       10 Jul  4 16:01 ExecutableTimestamp&#xA; -rw-r--r--  1 root root        2 Jul  4 16:01 _LogindSession&#xA; -rw-r--r--  1 root root        5 Jul  4 16:01 ProblemType&#xA; -rw-r--r--  1 root root       47 Jul  4 16:01 ProcCmdline&#xA; -rw-r--r--  1 root root       11 Jul  4 16:01 ProcCwd&#xA; -rw-r--r--  1 root root       89 Jul  4 16:01 ProcEnviron&#xA; -rw-r--r--  1 root root    10978 Jul  4 16:01 ProcMaps&#xA; -rw-r--r--  1 root root     1370 Jul  4 16:01 ProcStatus&#xA; -rw-r--r--  1 root root        1 Jul  4 16:01 Signal&#xA; -rw-r--r--  1 root root       29 Jul  4 16:01 Uname&#xA; -rw-r--r--  1 root root       45 Jul  4 16:01 UserGroups&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Still, I can't see the crash.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo crash /tmp/vmlinux-5.4.0-77 /boot/System.map-5.4.0-77-generic /tmp/crash/CoreDump&#xA;&#xA;crash: /tmp/vmlinux-5.4.0-77: no debugging data available&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="26159" LastEditorUserId="26159" LastEditDate="2021-07-04T21:32:47.220" LastActivityDate="2024-03-29T07:06:10.773" Title="ElementaryOS crashes while watching YouTube videos" Tags="|crash|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28079" PostTypeId="1" AcceptedAnswerId="28080" CreationDate="2021-06-21T04:45:51.267" Score="3" ViewCount="668" Body="&lt;p&gt;Running the Odin beta 2 release. I referred to some past answers but could not find the right setting to configure double-click to open a folder in Files.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; gsettings set io.elementary.files.preferences single-click false&#xA;No such key “single-click”&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried the dconf-editor too, the &lt;em&gt;single-click&lt;/em&gt; setting couldn't be found inside the files menu:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/FxZy0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/FxZy0.png&quot; alt=&quot;dconf screenshot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2021-07-21T10:04:30.363" Title="Cannot configure double-click (to open a folder) in files" Tags="|pantheon-files|mouse|files|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28080" PostTypeId="2" ParentId="28079" CreationDate="2021-06-21T09:41:01.987" Score="2" Body="&lt;p&gt;Odin no longer supports a choice of single-click/double-click modes I am afraid. There is just one &amp;quot;mixed&amp;quot; mode where single clicking on a folder icon navigates and clicking on a file icon selects. There are still several ways to select a folder:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Click on the helper emblem&lt;/li&gt;&#xA;&lt;li&gt;Hold down Shift or Control key and click&lt;/li&gt;&#xA;&lt;li&gt;Click on white space and drag to rubberband select&lt;/li&gt;&#xA;&lt;li&gt;(In List View) click on the Size, Type or Modified column&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-06-21T09:41:01.987" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28081" PostTypeId="1" AcceptedAnswerId="28117" CreationDate="2021-06-21T10:14:15.487" Score="1" ViewCount="22" Body="&lt;p&gt;When I grab &lt;code&gt;gala&lt;/code&gt; source either from GitHub or from &lt;code&gt;apt source gala&lt;/code&gt; I get version 3.3.2 and when I run &lt;code&gt;ninja&lt;/code&gt; to build it I get this error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;../src/Background/BackgroundSource.vala:123.17-123.34: error: The name `changed' does not exist in the context of `Gee.Map.Entry&amp;lt;int,Gala.Background&amp;gt;'&#xA;                background.changed.disconnect (background_changed);&#xA;                ^^^^^^^^^^^^^^^^^^&#xA;../src/Background/BackgroundSource.vala:124.17-124.34: error: The name `destroy' does not exist in the context of `Gee.Map.Entry&amp;lt;int,Gala.Background&amp;gt;'&#xA;                background.destroy ();&#xA;                ^^^^^^^^^^^^^^^^^^&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Looking closer, I change this line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;foreach (var background in backgrounds) {&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To this line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;foreach (var background in backgrounds.values) {&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And it compiles and works fine. But, I do not understand why this package fails to compile for me but obviously works for others and presumably the build system as well?&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-29T10:32:41.330" Title="Why does compiling gala from source not work unless I change how HashMap is used?" Tags="|development|gala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28082" PostTypeId="1" AcceptedAnswerId="28086" CreationDate="2021-06-21T13:59:14.600" Score="0" ViewCount="1164" Body="&lt;p&gt;I would like to integrate an appimage into elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;I have created .desktop file (in /usr/share/applications) as per many instructions on the interweb,&lt;/p&gt;&#xA;&lt;p&gt;all looks fine but the application doesn't show in &amp;quot;Applications&amp;quot;(app drawer)&lt;/p&gt;&#xA;&lt;p&gt;Any idea what am I doing wrong, please?&lt;/p&gt;&#xA;&lt;p&gt;(BTW, application runs and works OK, when executed manually)&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;PS(later edit):&lt;/em&gt;&#xA;just found that my .desktop works fine :-)&lt;/p&gt;&#xA;&lt;p&gt;I can find the appimage application on &amp;quot;Applications&amp;quot; drawer by searching for it,&lt;/p&gt;&#xA;&lt;p&gt;(although it is not normally visible)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Encoding=UTF-8&#xA;Version=1.0&#xA;Type=Application&#xA;Name=FreeCAD&#xA;Icon=/home/bambuko/Applications/Link_branch/1200px-FreeCAD-logo.svg.png&#xA;Exec=/home/bambuko/Applications/Link_branch/FreeCAD-asm3-Daily-Conda-Py3-Qt5-20210615-glibc2.12-x86_64.AppImage&#xA;Terminal=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-06-21T14:14:41.890" LastActivityDate="2022-03-28T22:02:03.410" Title="How to integrate appimage?" Tags="|applications|appimage|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28084" PostTypeId="2" ParentId="27743" CreationDate="2021-06-21T16:33:51.447" Score="0" Body="&lt;p&gt;It sounds like you may have a newer AMD processor or NVIDIA card than is supported by the open source drivers included in elementary OS 5.1.&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately it's not possible for our small team to test all hardware with elementary OS, especially when many hardware manufacturers don't support Linux and don't include their drivers in the open source Linux kernel on which elementary OS is built. The situation may improve for your specific hardware once elementary OS 6 is released; it will include an updated Linux base including an expanded set of hardware drivers.&lt;/p&gt;&#xA;&lt;p&gt;For future hardware purchases, we always recommend looking at &lt;a href=&quot;https://elementary.io/store/#devices&quot; rel=&quot;nofollow noreferrer&quot;&gt;retailers who explicitly support elementary OS&lt;/a&gt;. As a bonus, purchasing from these retailers helps support future development of elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;We hope you are able to give elementary OS another try in the future, particularly after the release of elementary OS 6.&lt;/p&gt;&#xA;" OwnerUserId="308" LastActivityDate="2021-06-21T16:33:51.447" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28086" PostTypeId="2" ParentId="28082" CreationDate="2021-06-23T09:39:14.547" Score="0" Body="&lt;p&gt;Well...&#xA;I think I understand what is going on?&#xA;Side loaded apps whether flatpak or appimage, do not list in app drawer, but are listed and shown in search.&#xA;I had similar experience (to my original question re appimage FreeCAD app) with Okular installed using flatpak.&lt;/p&gt;&#xA;&lt;p&gt;It is confusing and (in my humble opinion) it would be better if they were listed but with some indication that they are not official, but I guess it is what it is and as long as I know what is going on, it is OK.&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-06-23T09:39:14.547" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28091" PostTypeId="2" ParentId="1437" CreationDate="2021-06-24T16:29:06.627" Score="0" Body="&lt;p&gt;Since December 2020, early access builds have been available to financial supporters of Elementary:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://blog.elementary.io/elementary-os-on-raspberry-pi/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://blog.elementary.io/elementary-os-on-raspberry-pi/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;When support does land, it will require Elementary 6:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/wiki/Raspberry-Pi&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/wiki/Raspberry-Pi&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;It is unclear if support will land alongside the soon to be released Elementary 6, or will come later as a specific edition.&lt;/p&gt;&#xA;&lt;p&gt;These issues will be the ones to keep your eyes on:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/issues/472&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/472&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="15772" LastEditorUserId="15772" LastEditDate="2021-06-24T16:46:55.347" LastActivityDate="2021-06-24T16:46:55.347" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28093" PostTypeId="1" CreationDate="2021-06-24T23:52:23.623" Score="1" ViewCount="117" Body="&lt;p&gt;I have breathed new live into my 2011 mac by installing elementary os. How do I transfer photos and music files from mac os to elementary os?&#xA;I have saved all my photos and music files to an external hard drive, but when I plug the external drive in and try to open the files on elementary os - I get a message saying that I don't have permission.&#xA;Thank you in advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="24725" LastActivityDate="2024-01-25T06:07:20.847" Title="How to transfer photos from mac os to elementary os" Tags="|software-installation|photos|macintosh|permissions|apple|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28097" PostTypeId="1" CreationDate="2021-06-26T00:54:43.083" Score="1" ViewCount="135" Body="&lt;p&gt;Dark mode is toggled on with the GUI (see picture) and I've also tried system-wide commands that should of also made everything switched to dark mode, but no luck so far.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qmVAg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qmVAg.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-06-26T00:54:43.083" Title="Why is Dark Mode via Elementary Tweaks not working?" Tags="|release-hera|settings|themes|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28098" PostTypeId="1" CreationDate="2021-06-26T12:20:35.370" Score="1" ViewCount="27" Body="&lt;p&gt;If I install elementary OS on my pc alongside with Windows 10 by creating partitions manually, will I be able to choose what OS I wanna boot at computer startup?&lt;/p&gt;&#xA;" OwnerUserId="26210" LastActivityDate="2021-06-26T16:47:28.193" Title="Choosing os at startup" Tags="|boot|dual-boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28100" PostTypeId="1" CreationDate="2021-06-26T15:30:20.210" Score="1" ViewCount="47" Body="&lt;p&gt;Have an old Acer Extensa 4620 with a bad internal display. I can access BIOS with the external VGA attached but for some reason the external monitor goes away when I boot up from USB and start the install of Elementary OS. How to I get the external monitor to always stay on during intall/setup of this OS or any for that matter? There is no setting in BIOS for display or external display.&lt;/p&gt;&#xA;" OwnerUserId="26213" LastActivityDate="2024-03-14T07:01:10.303" Title="Install on Acer laptop with bad display" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28101" PostTypeId="2" ParentId="28098" CreationDate="2021-06-26T16:47:28.193" Score="1" Body="&lt;p&gt;Yes, when installing you'll be given the option to install alongside Windows. This will install GRUB, which will let you choose between windows and elementary each time you start.&lt;/p&gt;&#xA;" OwnerUserId="26123" LastActivityDate="2021-06-26T16:47:28.193" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28102" PostTypeId="1" CreationDate="2021-06-26T18:53:00.930" Score="1" ViewCount="81" Body="&lt;p&gt;I'm a linux newbie and I've just installed elementary OS 5.1.7 Hera on dual boot with Win10. After the install everything was running good, I installed the protonvpn-cli v1.0.0.1 with no problem. After a reboot, the only way I can access the internet is by connecting the VPN, otherwise it just wouldn't connect. I've tried Wifi, ethernet, nothing works. Any ideas on what the issue might be? My computer is a Latitude E7250&lt;/p&gt;&#xA;" OwnerUserId="26215" LastActivityDate="2024-03-13T12:05:00.627" Title="No internet when NOT on VPN" Tags="|release-hera|wifi|ethernet|openvpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28105" PostTypeId="2" ParentId="28100" CreationDate="2021-06-27T06:09:43.513" Score="0" Body="&lt;p&gt;The first thing you should try doing is simply unplugging and re-plugging the VGA connector in after the laptop has booted. This may send the signals of a new monitor being plugged in to Linux which may in turn enable the mirroring of the screen to VGA output.&lt;/p&gt;&#xA;&lt;p&gt;The next thing you can try is pressing the button that would enable such an output. By default in Elementary this is the &lt;kbd&gt;Super&lt;/kbd&gt; + &lt;kbd&gt;P&lt;/kbd&gt; combination of keys to cycle display modes.&lt;/p&gt;&#xA;&lt;p&gt;If none of this works you now have two basic options:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Try to type the commands needed manually into the system to enable output to the monitor without seeing them. You also won't be able to see any of the output which will make these even more difficult.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Type just the command &lt;code&gt;sudo apt install openssh-server&lt;/code&gt; which will install the SSH server, which then you can use another system on your network to remote into with.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Modify the &lt;code&gt;.iso&lt;/code&gt; to include the additional commands needed to work out of the box. See &lt;a href=&quot;https://askubuntu.com/questions/1344336/cubic-custom-iso-which-executes-shell-script-at-startup&quot;&gt;this answer&lt;/a&gt; on AskUbuntu about how to do that.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;The specific command you're likely looking to run is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output VGA-0 --mode 1920x1080_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;However, it may be called something else and you can really only easily get the correct listing by running &lt;code&gt;xrandr -q&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Also note that if you try to do this over SSH you'll need to run the commands with the &lt;code&gt;DISPLAY&lt;/code&gt; environment variable set, eg:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;DISPLAY=:0 xrandr -q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Since by default the SSH session will have no X11 display.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-27T06:09:43.513" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28106" PostTypeId="2" ParentId="28102" CreationDate="2021-06-27T06:20:31.803" Score="0" Body="&lt;p&gt;You can remove and disable the package by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove --purge protonvpn-cli&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-27T06:20:31.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28107" PostTypeId="2" ParentId="28100" CreationDate="2021-06-27T19:15:45.993" Score="0" Body="&lt;p&gt;So after some more digging I found  a post from 2014 here:&#xA;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2209845&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2209845&lt;/a&gt;&#xA;Turns out if you add this line: video=LVDS-1:d at the end of the line that shows up when you press the tab button when you are in the unetbootin bootup screen it will send the install to the external monitor.&lt;/p&gt;&#xA;&lt;p&gt;Thanks to you reply it got me thinking and googled the right question to find that post.&lt;/p&gt;&#xA;" OwnerUserId="26213" LastActivityDate="2021-06-27T19:15:45.993" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28108" PostTypeId="1" AcceptedAnswerId="28111" CreationDate="2021-06-27T19:42:31.367" Score="0" ViewCount="72" Body="&lt;p&gt;The custom keyboard shortcut is Ctrl+Alt+k.  After using this shortcut, it takes 30-60 seconds for everything to shutdown.&lt;/p&gt;&#xA;&lt;p&gt;Lately when I do this, the screen will just show the elementary logo on a black background, at which point I have to use the laptop power button to shut it down (can't open terminal, etc.)&lt;/p&gt;&#xA;&lt;p&gt;FYI I use a Lenovo Ideapad 3, run elementary OS 5.1.7 Hera only, and there are no other distros on my pc.&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-06-28T02:15:38.300" Title="Elementary won't shut down with custom keyboard shortcut" Tags="|release-hera|keyboard-shortcuts|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28109" PostTypeId="2" ParentId="28082" CreationDate="2021-06-27T19:44:26.910" Score="1" Body="&lt;p&gt;One thing that might make this sort of thing easier in the future - AppImageLauncher :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/TheAssassin/AppImageLauncher&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you install Eddy first, you can sideload this by downloading the deb from the git repo directly, instead of cluttering your system with PPA (because unfortunately, very few distros actually have this in their native repository) -&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/TheAssassin/AppImageLauncher/releases/download/v2.2.0/appimagelauncher_2.2.0-travis995.0f91801.bionic_arm64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/TheAssassin/AppImageLauncher/releases/download/v2.2.0/appimagelauncher_2.2.0-travis995.0f91801.bionic_arm64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once installed, this does two things :&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Adds an integration service to the OS that scans for AppImages in the background, and&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Extracts all the needed desktop entries from the AppImage when you double click on it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;It can also, by default, put all of the AppImages into an Application folder (or any other location you want)&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Eddy is in the AppCenter, and lets you sideload deb packages without dropping down to the command line. Otherwise, use dpkg -i to install the deb&lt;/p&gt;&#xA;" OwnerUserId="26221" LastActivityDate="2021-06-27T19:44:26.910" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28110" PostTypeId="2" ParentId="28073" CreationDate="2021-06-27T21:56:07.197" Score="0" Body="&lt;p&gt;Installing eOS on a 2015 MacBook Pro is great, as nearly everything works out of the box. I recently installed eOS 6 beta on a 13-inch 2015 MacBook Pro, and it works great. Dual-booting is also a great choice, as it makes updating firmware easy if/when necessary.&lt;/p&gt;&#xA;&lt;p&gt;Since elementaryOS is based on Ubuntu, guides for dual booting Ubuntu should be directly applicable. Two guides I have found useful for dual booting Ubuntu on Mac are &lt;a href=&quot;https://linuxnewbieguide.org/how-to-install-linux-on-a-macintosh-computer/&quot; rel=&quot;nofollow noreferrer&quot;&gt;LinuxNewbieGuide's installation guide&lt;/a&gt; and a &lt;a href=&quot;https://www.youtube.com/watch?v=1bONsydLV3A&quot; rel=&quot;nofollow noreferrer&quot;&gt;YouTube video by Reed&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I wrote up and posted &lt;a href=&quot;https://blog.senderolinux.com/2021/06/27/installing-eos-6-on-2015-macbook-pro-121/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; the steps I used to install eOS 6 beta on a 2015 MacBook Pro. Everything worked well except the camera, which took some extra troubleshooting to get fixed.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastEditorUserId="26142" LastEditDate="2021-06-28T00:35:03.993" LastActivityDate="2021-06-28T00:35:03.993" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28111" PostTypeId="2" ParentId="28108" CreationDate="2021-06-28T02:15:38.300" Score="1" Body="&lt;p&gt;If you simply bound the shortcut to &lt;code&gt;shutdown&lt;/code&gt; the default behavior for that is to schedule a shutdown in 60 seconds. You probably want to bind to the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;shutdown now&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-28T02:15:38.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28113" PostTypeId="2" ParentId="27965" CreationDate="2021-06-28T14:33:25.370" Score="2" Body="&lt;p&gt;I needed to create three partitions to install eOS 6 beta on a 2015 MacBook Pro with dual booting: boot, swap, and the main partition. Based on a discussion on an &lt;a href=&quot;https://askubuntu.com/questions/1313154/how-to-know-the-proper-amount-of-needed-disk-space-for-efi-partition&quot;&gt;AskUbuntu forum&lt;/a&gt;, I decided that 550MB would be a good recommended size for the boot partition when setting up dual boot.&lt;/p&gt;&#xA;&lt;p&gt;If you have plenty of space available, you can go up to 1GB to be completely in the clear.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-06-28T14:33:25.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28114" PostTypeId="2" ParentId="27965" CreationDate="2021-06-28T16:36:35.970" Score="0" Body="&lt;p&gt;Answer:&lt;/p&gt;&#xA;&lt;p&gt;There are three sizes, which can be specified by kernel command-line arguments.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;32 MB minimum size required for boot loader configuration files, so the partition must at least be this large.&lt;/li&gt;&#xA;&lt;li&gt;200 MB preferred because it gives a little extra space to work with.&lt;/li&gt;&#xA;&lt;li&gt;400MB maximum allowed if the installer insists on using GPT partitioning scheme with that particular size of device (or smaller).&#xA;You may change the value of LC_ALL before beginning installing Elementary OS 6 Beta that will set any locale and regional settings you wish. Furthermore, clear your browser cache after changing regional setting to use what you want (Ex: en-US for United States &amp;amp; English)&#xA;for &lt;a href=&quot;https://i.stack.imgur.com/ErwVJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ErwVJ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26228" LastActivityDate="2021-06-28T16:36:35.970" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28116" PostTypeId="1" CreationDate="2021-06-28T17:12:46.013" Score="2" ViewCount="1502" Body="&lt;p&gt;When i try to install ElementaryOs 6b2 in a VirtualBox VM, i only see a part of the installation screen.&#xA;So it's not possible for me to see the buttons to go to the next configuration screens.&lt;/p&gt;&#xA;&lt;p&gt;Do you know how it's possible to modify the default screen size (during installation)?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your help,&lt;/p&gt;&#xA;&lt;p&gt;Ange.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aE9TH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aE9TH.png&quot; alt=&quot;installation screen capture&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26231" LastEditorUserId="25608" LastEditDate="2021-07-16T18:33:36.743" LastActivityDate="2021-07-16T18:33:36.743" Title="Virtualbox installation window is too small to see the buttons" Tags="|virtualbox|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28117" PostTypeId="2" ParentId="28081" CreationDate="2021-06-29T10:32:41.330" Score="1" Body="&lt;p&gt;I solved this mystery. It's related to #869 which is a fix that happened shortly after &lt;code&gt;3.3.2&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;At the time the 3.3.2 build was made the vala version itself was different, so this code compiled at the time because vala was doing some additional checks on the &lt;code&gt;foreach&lt;/code&gt; iterable and doing some form of type inference. This explains why there is no version of &lt;code&gt;libgee&lt;/code&gt; itself that has ever exposed the default iterable of &lt;code&gt;HashMap&lt;/code&gt; to be anything but &lt;code&gt;Map.Entry&lt;/code&gt;, but why the code &lt;em&gt;did&lt;/em&gt; compile without this hack in the past.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-29T10:32:41.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28118" PostTypeId="2" ParentId="28013" CreationDate="2021-06-29T10:57:03.507" Score="1" Body="&lt;p&gt;I experienced the same issue, which seems to be caused by the grub.cfg file not being written to &lt;code&gt;/boot/efi/EFI/ubuntu/grub/grub.cfg&lt;/code&gt;, just to &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt;.&#xA;What I did was:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Created a backup of &lt;code&gt;/boot/efi/EFI/ubuntu/grub/grub.cfg&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Copied &lt;code&gt;/boot/grub/grub.cfg&lt;/code&gt; to &lt;code&gt;/boot/efi/EFI/ubuntu/grub/grub.cfg&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;After rebooting I was able to select newer kernels from the Grub menu&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I did this to test the 5.13 kernel with the eOS6 beta as sleep does not seem to work for me with a Ryzen 5500U CPU. With the new kernel the notebook goes to sleep just fine - but resume does not work :) One step at a time I guess, hehe.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-06-29T10:57:03.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28119" PostTypeId="1" CreationDate="2021-06-30T01:36:11.053" Score="0" ViewCount="116" Body="&lt;p&gt;My wingpanel has just disappeared and despite searching the internet for answers, I cannot get it back.&lt;/p&gt;&#xA;&lt;p&gt;It disappeared while I was working on configuring the networking to run a specific DNS setting.&lt;/p&gt;&#xA;&lt;p&gt;I can confirm a few items: it is installed in the software center.  Whey I use the command line to &amp;quot;start&amp;quot; it, I get the error &amp;quot;Segmentation fault&amp;quot; - I've tried repairing it as well as uninstalling and reinstalling.&lt;/p&gt;&#xA;&lt;p&gt;I am fairly new to ElementaryOS, so I apologize in advance for any lack of understanding.&lt;/p&gt;&#xA;" OwnerUserId="26240" LastActivityDate="2021-08-05T21:19:29.083" Title="Wingpanel Disappeared" Tags="|wingpanel|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28121" PostTypeId="2" ParentId="28116" CreationDate="2021-06-30T08:48:02.467" Score="5" Body="&lt;p&gt;Please open the configuration of the VM, go to Settings - System - Motherboard - Extended Features, and make sure &amp;quot;Enable EFI&amp;quot; is selected. Apply the setting and start the VM, the resolution should increase and you should be able to install eOS6 beta.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-06-30T08:48:02.467" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28123" PostTypeId="1" CreationDate="2021-06-30T12:07:26.997" Score="2" ViewCount="53" Body="&lt;p&gt;it seems like my network device is not supported on kernels below 5.11 is there a way to update the kernel from a disk on key or something since my internet works on the windows 11 I dual boot. Thanks&lt;/p&gt;&#xA;" OwnerUserId="26244" LastActivityDate="2023-03-23T05:04:25.493" Title="Network device not supported on default elementaryOS 6 beta" Tags="|kernel|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28124" PostTypeId="2" ParentId="28123" CreationDate="2021-06-30T13:38:55.597" Score="1" Body="&lt;p&gt;Probably the &amp;quot;easiest&amp;quot; way to do this is to use the Ubuntu mainline kernel PPA, but download the &lt;code&gt;.deb&lt;/code&gt; files individually. If you want to download kernels for 5.11.20 go here:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Kernel 5.11.20 from Ubuntu mainline PPA: &lt;a href=&quot;https://kernel.ubuntu.com/%7Ekernel-ppa/mainline/v5.11.22/amd64/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.11.22/amd64/&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;You'll find a bunch of &lt;code&gt;.deb&lt;/code&gt; files there, the ones you need are these files:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;-rw-r--r-- 1 root root 2.6M Jun 15 09:31 linux-headers-5.11.0-20-generic_5.11.0-20.21+21.10.1_amd64.deb&#xA;-rw-r--r-- 1 root root  12M Jun 15 09:30 linux-image-unsigned-5.11.0-20-generic_5.11.0-20.21+21.10.1_amd64.deb&#xA;-rw-r--r-- 1 root root  18M Jun 15 09:30 linux-modules-5.11.0-20-generic_5.11.0-20.21+21.10.1_amd64.deb&#xA;-rw-r--r-- 1 root root  48M Jun 15 09:31 linux-modules-extra-5.11.0-20-generic_5.11.0-20.21+21.10.1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Take note that these are the &lt;code&gt;-generic&lt;/code&gt; versions and not the &lt;code&gt;-lowlatency&lt;/code&gt; versions. Open a terminal and &lt;code&gt;cd&lt;/code&gt; into the directory where you downloaded the &lt;code&gt;.deb&lt;/code&gt; files and execute these commands in this order:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i linux-image-*&#xA;sudo dpkg -i linux-modules-*&#xA;sudo dpkg -i linux-headers-*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(Note if you try to install things in a different order they will fail)&lt;/p&gt;&#xA;&lt;p&gt;Once this is done you can now issue a &lt;code&gt;sudo reboot&lt;/code&gt; and once the reboot is complete verify that your kernel is updated by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;uname -ra&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Which should yield the result:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Linux vm 5.11.0-20-generic #21+21.10.1 SMP Tue Jun 15 09:14:45 UTC 2021 x86_64 x86_64 x86_64 GNU/Linux&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now that a newer kernel is installed it will stay installed until a newer one lands into the repositories used by Elementary. Once the newer kernel lands into a supported Elementary repository your system will automatically update to it like any other kernel and everything should continue to work.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-06-30T13:38:55.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28126" PostTypeId="2" ParentId="25394" CreationDate="2021-07-01T04:42:15.107" Score="0" Body="&lt;p&gt;I came across the following Gist on GitHub that may be of help:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/artman41/858450e2c29b239d8692213b684ada25#wsl-install-another-distro&quot; rel=&quot;nofollow noreferrer&quot;&gt;Instructions on how to install a custom distro in WSL2 (Windows SubSystem for Linux 2)&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26247" LastActivityDate="2021-07-01T04:42:15.107" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28127" PostTypeId="1" CreationDate="2021-07-01T06:23:29.993" Score="0" ViewCount="21" Body="&lt;p&gt;&lt;em&gt;&lt;strong&gt;Hola ¿Qué versión de python trae Hera?&#xA;¿Cómo puedo hacer que la ultima versión (en el caso de instalarle la ultima) sea&#xA;la predeterminada?&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="26249" LastActivityDate="2024-03-18T01:01:20.220" Title="Versión de python 3" Tags="|elementary-website|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28128" PostTypeId="1" CreationDate="2021-07-01T17:42:07.853" Score="0" ViewCount="84" Body="&lt;p&gt;The reason I am asking is I want to switch from Windows to elementaryOs on my laptop before I go on a trip and I want to know if I will be able to update elementary from 5.x to 6.0 when the full release comes out or should I wait with my install till the 6.0 is finished?&lt;/p&gt;&#xA;" OwnerUserId="26250" LastActivityDate="2024-03-18T03:02:35.320" Title="Should I wait for version 6.0 or can I install elementaryOs right now?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28129" PostTypeId="2" ParentId="28127" CreationDate="2021-07-01T19:38:29.777" Score="0" Body="&lt;p&gt;&lt;code&gt;sudo update-alternatives --config python&lt;/code&gt; o &lt;code&gt;sudo update-alternatives --config python3&lt;/code&gt; depende en que usas más. En Hera, la predeterminada es la misma alrededor de Linux: Python 3.6.&lt;/p&gt;&#xA;&lt;p&gt;(Subiendo como una respuesta oficial para que puedes marcar este pregunta como respondida)&lt;/p&gt;&#xA;" OwnerUserId="26022" LastActivityDate="2021-07-01T19:38:29.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28130" PostTypeId="2" ParentId="28128" CreationDate="2021-07-01T22:02:24.580" Score="0" Body="&lt;p&gt;It is currently not supported to update Elementary OS between versions.&lt;/p&gt;&#xA;&lt;p&gt;However, since it's Linux running under the hood there may be someone who releases an &amp;quot;update script&amp;quot; that accomplishes this in the future.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-07-01T22:02:24.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28132" PostTypeId="1" CreationDate="2021-07-02T11:07:22.537" Score="1" ViewCount="18" Body="&lt;p&gt;I hope i'm not repeating a old question, or something already covered, but here goes!&#xA;For critical passwords like this, i very much like multi word passwords. So when doing long passswords like word.secondword.etc. I like having the option of checking if i'm putting in my password (that i then manage with a password manager) correctly.&lt;/p&gt;&#xA;&lt;p&gt;Perhaps i was only being blind and didn't see a logo or something, but in that case i hope the logo or toggle becomes bigger in the release.&lt;/p&gt;&#xA;&lt;p&gt;Really, really loving the beta so far though, cleanest OS experience ive ever had i think.&lt;/p&gt;&#xA;" OwnerUserId="26255" LastActivityDate="2021-07-02T11:07:22.537" Title="Toggle &quot;show password&quot; when choosinig password for disk encryption" Tags="|system-installation|" AnswerCount="0" CommentCount="4" ClosedDate="2021-07-16T18:35:44.613" ContentLicense="CC BY-SA 4.0" />
  <row Id="28134" PostTypeId="2" ParentId="3272" CreationDate="2021-07-02T17:54:03.860" Score="0" Body="&lt;p&gt;Both the question and answers are old. But, if I understand them to today's version....on the install screen that lists the partitions on my hard drive there is a drop down selector under the list that lists the partitions again with the prompt: Device for boot loader installation:&#xA;is this where I can select the partition with the unwanted OS and that is where elementary will be installed?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for any help&lt;/p&gt;&#xA;" OwnerUserId="26259" LastActivityDate="2021-07-02T17:54:03.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28137" PostTypeId="1" CreationDate="2021-07-03T05:22:11.467" Score="0" ViewCount="187" Body="&lt;p&gt;I was wondering if there is a hotkey for terminating a program in Elm. OS. I want to recommend this OS to people who have 0 knowledge on computers. I have had several apps freeze and no force quit diag. If there is NOT I would recommend adding some kind of key combo. If there is, can someone let me know what it is? There is also nothing in the help documentation.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="26260" LastActivityDate="2024-02-04T15:04:35.610" Title="Force Quit (Ctl + Alt + Del)" Tags="|system|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28138" PostTypeId="2" ParentId="28137" CreationDate="2021-07-03T07:19:22.620" Score="0" Body="&lt;p&gt;There is not a default app or keybinding for killing a process. Out of the box the easiest thing you can do is press &lt;kbd&gt;Super&lt;/kbd&gt;+&lt;kbd&gt;Space&lt;/kbd&gt; and execute the &lt;code&gt;xkill&lt;/code&gt; command and then click whatever window you wish to kill.&lt;/p&gt;&#xA;&lt;p&gt;Seperate from that there is a really nice &lt;a href=&quot;https://github.com/stsdc/monitor&quot; rel=&quot;nofollow noreferrer&quot;&gt;Monitor&lt;/a&gt; app by Stanisław Dac in the AppCenter:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mG03r.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mG03r.png&quot; alt=&quot;Screenshot of the Monitor app&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also see &lt;a href=&quot;https://askubuntu.com/a/95202/672975&quot;&gt;https://askubuntu.com/a/95202/672975&lt;/a&gt; for more severe options that still allow for a graceful shutdown/reboot of GUI or entire system.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastEditorUserId="23095" LastEditDate="2022-05-15T12:52:34.957" LastActivityDate="2022-05-15T12:52:34.957" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28143" PostTypeId="2" ParentId="24355" CreationDate="2021-07-05T09:33:25.067" Score="0" Body="&lt;p&gt;In Elementary 5 (Hera) this can happen when &lt;code&gt;gala&lt;/code&gt; (the window manager) crashes. You can recover from a situation like this without rebooting by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;setsid ibus-daemon &amp;amp;&#xA;ibus restart&#xA;setsid gala --replace &amp;amp;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The first command, &lt;code&gt;ibus-daemon&lt;/code&gt; starts the ibus daemon, which likely is needed because it's no longer running - you can verify that before running the command by runnning &lt;code&gt;ps -e | grep ibus-daemon&lt;/code&gt; to see if it exists.&lt;/p&gt;&#xA;&lt;p&gt;The second command &lt;code&gt;ibus restart&lt;/code&gt; hooks into the now running daemon.&lt;/p&gt;&#xA;&lt;p&gt;The third command restarts the &lt;code&gt;gala&lt;/code&gt; window manager because it seems when &lt;code&gt;ibus&lt;/code&gt; is started before it most keyboard shortcuts don't work, so we &amp;quot;reload&amp;quot; it.&lt;/p&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-07-05T09:33:25.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28146" PostTypeId="1" CreationDate="2021-07-05T14:58:14.110" Score="0" ViewCount="1982" Body="&lt;p&gt;OS: Elementary OS 5.1.7 Hera (Ubuntu 18.04.04 LTS)&lt;/p&gt;&#xA;&lt;p&gt;I Downloaded the VPN Package for Ubuntu 18.04 and received an Error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;CyberGhost Installer ...&#xA;&#xA;No LSB modules are available.&#xA;No LSB modules are available.&#xA;Checking if glibc version is compatible&#xA;Couldn't detect a valid version of your distribution.&#xA;Make sure you have downloaded the correct install package for your distribution&#xA;Note: We support only the following distributions for Debian based OS:&#xA;&#xA;-Ubuntu 16.04 &#xA;-Ubuntu 18.04 &#xA;-Ubuntu 19.04 &#xA;-Ubuntu 19.10 &#xA;-Ubuntu 20.04 &#xA;-Linux Mint 19.2 &#xA;-Linux Mint 20&#xA;-PopOS 19.10 &#xA;-Kali 2019/2020 (glibc version should be 2.29/2.30/2.31 in order to work)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The script of the install.bh:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/bash&#xA;&#xA;    # if user is not running the command as root&#xA;    if [ &amp;quot;$UID&amp;quot; -ne 0 ]; then&#xA;&#xA;        # output message&#xA;        echo &amp;quot;Please run the installer with SUDO!&amp;quot;&#xA;&#xA;        # stop script&#xA;        exit&#xA;    fi&#xA;&#xA;    # check update&#xA;    apt update &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;&#xA;    # output message&#xA;    echo -e &amp;quot;\nCyberGhost Installer ...\n&amp;quot;&#xA;&#xA;    # get GLIBC version&#xA;    glibcVersion=$(ldd --version | grep -i ldd | awk -F' ' {'print $5'})&#xA;    &#xA;    # get distribution version&#xA;    ubuntuDistroVersion=$(lsb_release -sr)&#xA;    distroName=$(lsb_release -a | grep -i &amp;quot;Distributor ID:&amp;quot; | awk -F' ' {'print $3'})&#xA;    distroVersion=$(lsb_release -a | grep -i &amp;quot;Release:&amp;quot; | awk -F' ' {'print $2'})   &#xA;&#xA;    echo &amp;quot;Checking if glibc version is compatible&amp;quot;&#xA;    &#xA;&#xA;    # check if GLIBC version is compatible&#xA;    if [ &amp;quot;$ubuntuDistroVersion&amp;quot; == &amp;quot;16.04&amp;quot; ]; then&#xA;            &#xA;        if [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.23&amp;quot; ] ; then&#xA;&#xA;            echo &amp;quot;The glibc version is compatible, continue...&amp;quot;&#xA;&#xA;        else&#xA;&#xA;            echo &amp;quot;THe glibc version is incompatible, exiting setup...&amp;quot;&#xA;            exit&#xA;&#xA;        fi&#xA;&#xA;    elif [ &amp;quot;$ubuntuDistroVersion&amp;quot; == &amp;quot;18.04&amp;quot; ] || [ &amp;quot;$distroName&amp;quot; == &amp;quot;LinuxMint&amp;quot; ]; then&#xA;        &#xA;        if [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.27&amp;quot; ]; then&#xA;        &#xA;            echo &amp;quot;The glibc version is compatible, continue...&amp;quot;&#xA;        &#xA;        else&#xA;        &#xA;            echo &amp;quot;The glibc version is incompatible, exiting setup...&amp;quot;&#xA;            exit&#xA;&#xA;        fi&#xA;&#xA;    elif [ &amp;quot;$ubuntuDistroVersion&amp;quot; == &amp;quot;19.10&amp;quot; ]; then&#xA;&#xA;        if [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.30&amp;quot; ]; then&#xA;&#xA;            echo &amp;quot;The glibc version is compatible, continue...&amp;quot;&#xA;&#xA;        else&#xA;&#xA;            echo &amp;quot;The glibc version is incompatible, exiting setup...&amp;quot;&#xA;            exit&#xA;        fi&#xA;&#xA;    elif [ &amp;quot;$distroName&amp;quot; == &amp;quot;Kali&amp;quot; ] || [ &amp;quot;$ubuntuDistroVersion&amp;quot; == &amp;quot;19.04&amp;quot; ] || [ &amp;quot;$ubuntuDistroVersion&amp;quot; == &amp;quot;20.04&amp;quot; ]; then&#xA;&#xA;        if [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.29&amp;quot; ] || [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.31&amp;quot; ] || [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.30&amp;quot; ]; then&#xA;&#xA;            echo &amp;quot;The glibc version is compatible, continue...&amp;quot;&#xA;        &#xA;        else&#xA;&#xA;            echo &amp;quot;The glibc version is incompatible, exiting setup...&amp;quot;&#xA;            exit&#xA;        &#xA;        fi&#xA;&#xA;    elif [ &amp;quot;$distroName&amp;quot; == &amp;quot;Linuxmint&amp;quot; ] &amp;amp;&amp;amp; [ &amp;quot;$distroVersion&amp;quot; == &amp;quot;20&amp;quot; ]; then&#xA;        &#xA;        if [ &amp;quot;$glibcVersion&amp;quot; == &amp;quot;2.31&amp;quot; ]; then&#xA;            echo &amp;quot;The glibc version is compatible, continue...&amp;quot;&#xA;        else&#xA;            echo &amp;quot;The glibc version is incompatible, exiting setup...&amp;quot;&#xA;            exit&#xA;        fi&#xA;&#xA;    else&#xA;&#xA;        echo &amp;quot;Couldn't detect a valid version of your distribution.&amp;quot;&#xA;        echo &amp;quot;Make sure you have downloaded the correct install package for your distribution&amp;quot;&#xA;        echo &amp;quot;Note: We support only the following distributions for Debian based OS:&amp;quot;&#xA;        echo &amp;quot;&amp;quot;&#xA;        echo &amp;quot;-Ubuntu 16.04 &amp;quot;&#xA;        echo &amp;quot;-Ubuntu 18.04 &amp;quot;&#xA;        echo &amp;quot;-Ubuntu 19.04 &amp;quot;&#xA;        echo &amp;quot;-Ubuntu 19.10 &amp;quot;&#xA;        echo &amp;quot;-Ubuntu 20.04 &amp;quot;&#xA;        echo &amp;quot;-Linux Mint 19.2 &amp;quot;&#xA;        echo &amp;quot;-Linux Mint 20&amp;quot;&#xA;        echo &amp;quot;-PopOS 19.10 &amp;quot;&#xA;        echo &amp;quot;-Kali 2019/2020 (glibc version should be 2.29/2.30/2.31 in order to work) &amp;quot;&#xA;        exit&#xA;&#xA;    fi          &#xA;&#xA;&#xA;    # define required packages&#xA;    requiredPackages=(curl openvpn resolvconf wireguard)&#xA;&#xA;    # loop through packages&#xA;    for package in &amp;quot;${requiredPackages[@]}&amp;quot;; do&#xA;&#xA;        # set package&#xA;        p=&amp;quot;$package&amp;quot;&#xA;&#xA;        # if package is opwireguardenvpn&#xA;        if [ &amp;quot;$package&amp;quot; == &amp;quot;wireguard&amp;quot; ]; then&#xA;&#xA;            # check if wireguard ppa exist&#xA;            responseCode=$(grep ^ /etc/apt/sources.list /etc/apt/sources.list.d/* | grep -c wireguard)&#xA;&#xA;            # if ppa does not exist&#xA;            if [ &amp;quot;$responseCode&amp;quot; == &amp;quot;0&amp;quot; ]; then&#xA;&#xA;                # install wireguard ppa&#xA;                add-apt-repository -y ppa:wireguard/wireguard &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;                apt update &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;            fi&#xA;&#xA;            # change package name&#xA;            p=&amp;quot;wg&amp;quot;&#xA;        fi&#xA;&#xA;        # check if package is installed and get exit code&#xA;        responseCode=$(which &amp;quot;$p&amp;quot; &amp;gt; /dev/null 2&amp;gt;&amp;amp;1; echo &amp;quot;$?&amp;quot;)&#xA;&#xA;        # output message&#xA;        echo -n &amp;quot;Check if \&amp;quot;$package\&amp;quot; package is already installed ... &amp;quot;&#xA;&#xA;        # if package is installed&#xA;        if [ &amp;quot;$responseCode&amp;quot; == &amp;quot;0&amp;quot; ]; then&#xA;&#xA;            # output message&#xA;            echo &amp;quot;Yes&amp;quot;&#xA;&#xA;            # if package is openvpn&#xA;            if [ &amp;quot;$package&amp;quot; == &amp;quot;openvpn&amp;quot; ]; then&#xA;&#xA;                # get openvpn version&#xA;                openvpnVersion=$(openvpn --version | head -n 1 | awk '{print $2}')&#xA;&#xA;                # get major version&#xA;                majorVersion=$(echo &amp;quot;$openvpnVersion&amp;quot; | awk -F. '{print $1}')&#xA;&#xA;                # get minor version&#xA;                minorVersion=$(echo &amp;quot;$openvpnVersion&amp;quot; | awk -F. '{print $2}')&#xA;&#xA;                # output message&#xA;                echo -n &amp;quot;Checking OpenVPN version ... &amp;quot;&#xA;&#xA;                if [ $majorVersion -ge 2 ] &amp;amp;&amp;amp; [ $minorVersion -gt 3 ]; then&#xA;&#xA;                    # output message&#xA;                    echo &amp;quot;Latest ...&amp;quot;&#xA;                else&#xA;&#xA;                    # output message&#xA;                    echo &amp;quot;The OpenVPN version is too old ... &amp;quot;&#xA;                    echo &amp;quot;Removing old package ... &amp;quot;&#xA;&#xA;                    # uninstall package&#xA;                    apt remove &amp;quot;$package&amp;quot; -y &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;&#xA;                    # output message&#xA;                    echo -n &amp;quot;Installing new package ... &amp;quot;&#xA;                    curl -s https://swupdate.openvpn.net/repos/repo-public.gpg | apt-key add -&#xA;                    echo &amp;quot;deb http://build.openvpn.net/debian/openvpn/stable xenial main&amp;quot; &amp;gt; /etc/apt/sources.list.d/openvpn-aptrepo.list&#xA;                    apt update &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;                    apt install &amp;quot;$package&amp;quot; -y &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;&#xA;                    # output message&#xA;                    echo &amp;quot;Done.&amp;quot;&#xA;                fi&#xA;            fi&#xA;        else&#xA;&#xA;            # output message&#xA;            echo -n &amp;quot;No, installing ... &amp;quot;&#xA;&#xA;            if [ &amp;quot;$package&amp;quot; == &amp;quot;openvpn&amp;quot; ]; then&#xA;&#xA;                # get openvpn version from apt&#xA;                openvpnVersion=$(apt show openvpn|grep &amp;quot;Version:&amp;quot; | awk '{ print $2 }')&#xA;                version=$(echo &amp;quot;$openvpnVersion&amp;quot;| awk -F'-' '{print $1}')&#xA;                &#xA;                # get major version&#xA;                majorVersion=$(echo &amp;quot;$version&amp;quot; | awk -F. '{print $1}')&#xA;&#xA;                # get minor version&#xA;                minorVersion=$(echo &amp;quot;$version&amp;quot; | awk -F. '{print $2}')&#xA;&#xA;                # if version is lower then 2.4&#xA;                if [ $majorVersion -ge 2 ] &amp;amp;&amp;amp; [ $minorVersion -lt 4 ]; then&#xA;                    curl -s https://swupdate.openvpn.net/repos/repo-public.gpg | apt-key add -&#xA;                    echo &amp;quot;deb http://build.openvpn.net/debian/openvpn/stable xenial main&amp;quot; &amp;gt; /etc/apt/sources.list.d/openvpn-aptrepo.list&#xA;                    apt update &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;                fi&#xA;            fi&#xA;&#xA;&#xA;            # install package&#xA;            apt install &amp;quot;$package&amp;quot; -y &amp;gt; /dev/null 2&amp;gt;&amp;amp;1&#xA;&#xA;            # output message&#xA;            echo &amp;quot;Done.&amp;quot;&#xA;        fi&#xA;    done&#xA;&#xA;    # output message&#xA;    echo &amp;quot;Continue ...&amp;quot;&#xA;&#xA;    # if directory exist&#xA;    if [ -d /usr/local/cyberghost ]; then&#xA;&#xA;        # remove directory&#xA;        rm -rf /usr/local/cyberghost&#xA;    fi&#xA;&#xA;    echo &amp;quot;Installing application ...&amp;quot;&#xA;&#xA;    # if logs directory does not exist&#xA;    if [ ! -d /usr/local/cyberghost ]; then&#xA;&#xA;        # create logs directory if not exist&#xA;        mkdir /usr/local/cyberghost&#xA;    fi&#xA;&#xA;    # copy certificates to local directory&#xA;    cp -r cyberghost/* /usr/local/cyberghost&#xA;&#xA;    # change directory permissions&#xA;    chmod -R 755 /usr/local/cyberghost&#xA;&#xA;    # output message&#xA;    echo &amp;quot;Create symlinks ...&amp;quot;&#xA;&#xA;    # if symlink exist&#xA;    if [ -L /usr/bin/cyberghostvpn ]; then&#xA;&#xA;        # remove old symlink&#xA;        rm /usr/bin/cyberghostvpn&#xA;    fi&#xA;&#xA;    # create symlink&#xA;    ln -sf /usr/local/cyberghost/cyberghostvpn /usr/bin/cyberghostvpn&#xA;&#xA;    # setup application&#xA;    cyberghostvpn --setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm new to Linux so I would really appreciate some help.&lt;/p&gt;&#xA;" OwnerUserId="26273" LastActivityDate="2022-09-07T09:23:15.727" Title="Can't Install Cyberghost VPN" Tags="|software-installation|ubuntu|vpn|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28147" PostTypeId="2" ParentId="28146" CreationDate="2021-07-05T19:58:00.343" Score="0" Body="&lt;p&gt;Looking over the installer checks and seeing it uses &lt;code&gt;lsb_release&lt;/code&gt;, i can suggest a 'dirty' way of bypassing it and making it return what it needs to in order for the installation to continue.&lt;/p&gt;&#xA;&lt;p&gt;You can try editing the &lt;code&gt;/etc/lsb-release&lt;/code&gt; file and make it look like the one from Ubuntu 18.04, something like this:&lt;br /&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ny563.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ny563.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Remember to revert the changes after the installation completes. Also, if everything works fine, consider reaching out to the Cyberghost and ask them to support elementary OS too.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2021-07-05T19:58:00.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28149" PostTypeId="2" ParentId="27840" CreationDate="2021-07-06T05:40:58.250" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://gist.github.com/primaryobjects/f723b966d5f42094619f9c1048c7838b&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/primaryobjects/f723b966d5f42094619f9c1048c7838b&lt;/a&gt;&#xA;For tp-link archer t4u plus v1.0 (European edition I suppose) this solution worked for me on Ubuntu.&lt;/p&gt;&#xA;" OwnerUserId="26280" LastActivityDate="2021-07-06T05:40:58.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28150" PostTypeId="2" ParentId="28119" CreationDate="2021-07-06T16:20:17.983" Score="1" Body="&lt;p&gt;Sorry the late response.  I eneded up restoring an image from a few days prior.  I tried several things, but I am pretty good about backing up, so decided to go with that option.  I used Clonezilla, so just reimaged the drive and went forward from there.&lt;/p&gt;&#xA;" OwnerUserId="26240" LastActivityDate="2021-07-06T16:20:17.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28151" PostTypeId="1" CreationDate="2021-07-06T19:45:51.103" Score="0" ViewCount="21" Body="&lt;p&gt;Anyone tried installing 5.1.Hera on Dell Inspiron 5301&#xA;Installation works ok.&lt;/p&gt;&#xA;&lt;p&gt;However from the Grub menu, when eOS is selected, it goes to a blank screen with a blinking cursor. It seem to never recover from there.&lt;/p&gt;&#xA;&lt;p&gt;Ubuntu 20.10 works fine on the same setup though.&lt;/p&gt;&#xA;" OwnerUserId="26286" LastActivityDate="2024-03-24T06:04:30.523" Title="eOS 5.1 on Dell Inspiron 5301" Tags="|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28152" PostTypeId="1" CreationDate="2021-07-07T08:38:34.573" Score="0" ViewCount="39" Body="&lt;p&gt;I just ordered Dell Inspirion 15 (AMD Ryzen™ 5 5500U processor and AMD Radeon GPU). I plan to use the elementary as the only OS, as I used it from 0.4 to 5.1.7 on my old i3 laptop and it worked flawlessly and I love it :)&#xA;I wonder if anybody experienced any problem with installing/running the elementary OS on Dell Inspirion 15?&lt;/p&gt;&#xA;" OwnerUserId="26291" LastActivityDate="2024-03-24T09:03:05.917" Title="Dell Inspirion 15" Tags="|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28153" PostTypeId="2" ParentId="28152" CreationDate="2021-07-07T20:36:06.383" Score="0" Body="&lt;p&gt;While not on a Dell machine, my Lenovo IdeaPad 5 14ALC05 uses the same CPU as yours. Right off the bat, with eOS5 I had multiple issues, mainly I was unable to change the screen brightness, and in general the system seemed to perform sub-optimally.&lt;/p&gt;&#xA;&lt;p&gt;Instead of further investigation, I decided to install the second beta of eOS6. Thanks to the newer kernel the system was much more usable, however, Suspend/Sleep, and resume from sleep did not work.&lt;/p&gt;&#xA;&lt;p&gt;I updated to the latest kernel (version 5.13). The laptop now manages to suspend/sleep correctly, but resuming from sleep still fails. The issue is most probably with the AMD GPU driver, there is a fairly lengthy discussion at &lt;a href=&quot;https://gitlab.freedesktop.org/drm/amd/-/issues/1230&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitLab&lt;/a&gt;. And there is also a post on &lt;a href=&quot;https://askubuntu.com/questions/1345609/wakeup-after-suspend-reboots-ideapad-5-14alc05-under-ubuntu-21-04&quot;&gt;AskUbuntu&lt;/a&gt; that leads to a &lt;a href=&quot;https://www.reddit.com/r/linuxhardware/comments/i28nm5/ideapad_14are05_s3_sleep_fix/&quot; rel=&quot;nofollow noreferrer&quot;&gt;reddit thread&lt;/a&gt; with some more advice.&lt;/p&gt;&#xA;&lt;p&gt;Some report success after manually applying certain patches, others have switched to different distros in the meantime. The bottom line seems to be - the fixes will be part of Kernel 5.14. So, in about 2-3 months it should be possible to have a hassle free experience, with working suspend/sleep.&lt;/p&gt;&#xA;&lt;p&gt;Please do report back on your experience with running eOS5/6, as I am curious if it's any better on a Dell machine. For now I am on eOS6 beta 2 - sleep does not work, neither does the fingerprint scanner (but I have to confess that I did not investigate the fingerprint scanner at all). The webcam and the microphone work fine, wifi does too.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-07-07T20:36:06.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28154" PostTypeId="1" CreationDate="2021-07-07T20:40:36.337" Score="0" ViewCount="98" Body="&lt;p&gt;elementary OS 5.1.7 Hera&lt;/p&gt;&#xA;&lt;p&gt;Terminal is not accepting my user password in Elementary os.&lt;/p&gt;&#xA;&lt;p&gt;Very strange because I have not changed my user password and it also works when I log in.&lt;/p&gt;&#xA;&lt;p&gt;Have had many installs of Elementary and its the first time this has happened.&lt;/p&gt;&#xA;&lt;p&gt;I am administrator.&lt;/p&gt;&#xA;&lt;p&gt;Could this be malicious? and if so what might have happened?&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;code&lt;/code&gt; x@Intel:~$ sudo chkrootkit&#xA;[sudo] password for x:&lt;br /&gt;&#xA;Sorry, try again.&#xA;[sudo] password for x:&#xA;&lt;code&gt;code&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26307" LastActivityDate="2024-03-24T02:03:35.443" Title="Terminal is not accepting my user password in Elementary os" Tags="|release-hera|applications|system|pantheon-terminal|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28155" PostTypeId="2" ParentId="28151" CreationDate="2021-07-07T20:45:21.000" Score="0" Body="&lt;p&gt;In the Grub menu, select Advanced options for elementary, and try booting into recovery mode (if there are multiple choices with different kernel versions then keep trying until hopefully one of them boots). If that works and you get to a command line then look at the log files for anything suspicious that might tell you why the OS is not starting properly.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-07-07T20:45:21.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28157" PostTypeId="2" ParentId="28154" CreationDate="2021-07-07T20:59:33.013" Score="0" Body="&lt;p&gt;Your sudoers file might have gotten incorrectly modified. If that is the case, following &lt;a href=&quot;https://www.psychocats.net/ubuntu/fixsudo&quot; rel=&quot;nofollow noreferrer&quot;&gt;this guide&lt;/a&gt; should help fix the problem.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-07-07T20:59:33.013" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28160" PostTypeId="1" CreationDate="2021-07-08T19:56:17.743" Score="1" ViewCount="76" Body="&lt;p&gt;Is there a way to completely remove &lt;em&gt;&lt;strong&gt;ALL&lt;/strong&gt;&lt;/em&gt; traces of a program in Linux?&lt;/p&gt;&#xA;&lt;p&gt;I've researched a lot on this, and I've seen people talk about &lt;code&gt;apt-get remove packagename&lt;/code&gt;, &lt;code&gt;apt-get purge packagename&lt;/code&gt;, &lt;code&gt;apt-get remove --purge packagename&lt;/code&gt;, and &lt;code&gt;apt-get autoremove&lt;/code&gt;, but it sounds like all of these leave configuration files or other traces of some sort.&lt;/p&gt;&#xA;&lt;p&gt;I want to remove &lt;em&gt;&lt;strong&gt;EVERYTHING&lt;/strong&gt;&lt;/em&gt;, though. I'm talking uninstall and completely remove the program, the package, all dependencies, all configuration files, and all data files. Remove everything associated with the program, leaving the system like the program was never installed and never existed.&lt;/p&gt;&#xA;&lt;p&gt;I'm looking to switch to Linux as my main OS (from Windows), but for me to sleep soundly at night, I &lt;em&gt;need&lt;/em&gt; to know that when I uninstall something, everything associated with that thing is gone. I know it's weird. But you know, we all have our needs.&lt;/p&gt;&#xA;&lt;p&gt;Please help me out here; I could even pick a distro based on this, if I had to.&lt;/p&gt;&#xA;&lt;p&gt;Thanks, and have a wonderful day!&lt;/p&gt;&#xA;" OwnerDisplayName="user26308" LastActivityDate="2021-07-12T22:27:32.830" Title="Linux: How to Completely Remove ALL Traces of a Program?" Tags="|applications|software-installation|package-management|programming|package|" AnswerCount="2" CommentCount="1" ClosedDate="2021-08-09T19:29:44.663" ContentLicense="CC BY-SA 4.0" />
  <row Id="28166" PostTypeId="5" CreationDate="2021-07-10T09:48:33.490" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2021-07-10T09:48:33.490" LastActivityDate="2021-07-10T09:48:33.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28167" PostTypeId="4" CreationDate="2021-07-10T09:48:33.490" Score="0" Body="Questions about keyboard layouts, layout switching, input issues in specific languages, etc." OwnerUserId="84" LastEditorUserId="84" LastEditDate="2021-07-16T18:33:42.003" LastActivityDate="2021-07-16T18:33:42.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28168" PostTypeId="2" ParentId="28160" CreationDate="2021-07-10T19:58:43.137" Score="-1" Body="&lt;p&gt;I read your question with interest, it is quite logical that I do not let you sleep, I think I can offer you a solution.&#xA;After doing everything you describe, you could manually search your system for all traces of the program, you know.&#xA;For that, install &amp;quot;tree&amp;quot; and do the following&#xA;tree | grep &amp;quot;program&amp;quot;&#xA;with that you will ask for a complete list of all files, folders, etc. (It is important to do it from the root of the system) and with grep you will filter whatever you are looking for from that list.&#xA;Greetings and follow the white rabbit. ;)&lt;/p&gt;&#xA;" OwnerUserId="26327" LastActivityDate="2021-07-10T19:58:43.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28169" PostTypeId="1" CreationDate="2021-07-10T20:05:29.863" Score="1" ViewCount="43" Body="&lt;p&gt;While attempting to boot the &lt;code&gt;elementaryos-5.1-stable.20200814.iso&lt;/code&gt; installer with an AMD Radeon 550RX with 4GB RAM I'm seeing corrupted graphics and not sure how to proceed:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/0JzJY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0JzJY.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;For what it's worth, I ran through the installation with another older significantly slower GPU and then updated the system following the install. I then put the 550RX back in and was met with very similar graphical corruption.&lt;/p&gt;&#xA;&lt;h2&gt;Update 1 - still no joy:&lt;/h2&gt;&#xA;&lt;p&gt;Attempted to follow &lt;a href=&quot;https://elementaryos.stackexchange.com/a/19023&quot;&gt;these instructions&lt;/a&gt; wherein I then installed &lt;a href=&quot;https://www.amd.com/en/support/graphics/radeon-500-series/radeon-rx-500-series/radeon-rx-550&quot; rel=&quot;nofollow noreferrer&quot;&gt;the drivers from AMD for 18.04.5 HWE&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;lsmod&lt;/code&gt; shows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ lsmod | grep amd&#xA;amdgpu               4530176  0&#xA;amd_iommu_v2           20480  1 amdgpu&#xA;gpu_sched              32768  1 amdgpu&#xA;i2c_algo_bit           16384  1 amdgpu&#xA;ttm                   102400  1 amdgpu&#xA;drm_kms_helper        188416  1 amdgpu&#xA;drm                   491520  4 gpu_sched,drm_kms_helper,amdgpu,ttm&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Details of the system via &lt;code&gt;inxi&lt;/code&gt; are:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ ./inxi --admin --verbosity=7 --filter --no-host --width -G --display&#xA;&#xA;System:&#xA;  Kernel: 5.4.0-77-generic x86_64 bits: 64 compiler: gcc v: 7.5.0 &#xA;  parameters: BOOT_IMAGE=/boot/vmlinuz-5.4.0-77-generic &#xA;  root=UUID=a816ea97-c8b4-4021-8956-87e8b030ad78 ro text splash amdgpu.dc=0 &#xA;  vt.handoff=1 &#xA;  Desktop: Pantheon info: wingpanel, plank vt: 7 dm: LightDM 1.26.0 &#xA;  Distro: elementary OS 5.1.7 Hera base: Ubuntu 18.04 bionic &#xA;Machine:&#xA;  Type: Desktop System: Dell product: Inspiron 530s v: N/A serial: &amp;lt;filter&amp;gt; &#xA;  Chassis: type: 3 serial: &amp;lt;filter&amp;gt; &#xA;  Mobo: Dell model: 0RY007 v: ��� serial: &amp;lt;filter&amp;gt; BIOS: Dell v: 1.0.7 &#xA;  date: 11/03/2007 &#xA;Battery:&#xA;  Message: No system battery data found. Is one present? &#xA;Memory:&#xA;  RAM: total: 2.68 GiB used: 1.15 GiB (43.0%) &#xA;  RAM Report: permissions: Unable to run dmidecode. Root privileges required. &#xA;CPU:&#xA;  Info: Dual Core model: Intel Pentium Dual E2140 bits: 64 type: MCP &#xA;  arch: Core Merom family: 6 model-id: F (15) stepping: D (13) microcode: A4 &#xA;  cache: L2: 1024 KiB bogomips: 6383 &#xA;  Speed: 1596 MHz min/max: 1200/1600 MHz Core speeds (MHz): 1: 1596 2: 1596 &#xA;  Flags: acpi aperfmperf apic arch_perfmon bts clflush cmov constant_tsc cpuid &#xA;  cx16 cx8 de ds_cpl dtes64 dtherm dts est fpu fxsr ht lahf_lm lm mca mce mmx &#xA;  monitor msr mtrr nopl nx pae pat pbe pdcm pebs pge pni pse pse36 pti &#xA;  rep_good sep sse sse2 ssse3 syscall tm tm2 tsc vme xtpr &#xA;  Vulnerabilities: Type: itlb_multihit status: KVM: Vulnerable &#xA;  Type: l1tf mitigation: PTE Inversion &#xA;  Type: mds &#xA;  status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled &#xA;  Type: meltdown mitigation: PTI &#xA;  Type: spec_store_bypass status: Vulnerable &#xA;  Type: spectre_v1 &#xA;  mitigation: usercopy/swapgs barriers and __user pointer sanitization &#xA;  Type: spectre_v2 &#xA;  mitigation: Full generic retpoline, STIBP: disabled, RSB filling &#xA;  Type: srbds status: Not affected &#xA;  Type: tsx_async_abort status: Not affected &#xA;Graphics:&#xA;  Device-1: AMD Lexa PRO [Radeon RX 550/550X] driver: N/A alternate: amdgpu &#xA;  bus-ID: 01:00.0 chip-ID: 1002:699f class-ID: 0300 &#xA;  Display: x11 server: X.Org 1.20.8 driver: loaded: ati,vesa &#xA;  unloaded: fbdev,modesetting,radeon display-ID: :0 screens: 1 &#xA;  Screen-1: 0 s-res: 1280x1024 s-dpi: 95 s-size: 342x271mm (13.5x10.7&amp;quot;) &#xA;  s-diag: 436mm (17.2&amp;quot;) &#xA;  Monitor-1: default res: 1280x1024 &#xA;  OpenGL: renderer: llvmpipe (LLVM 12.0.0 128 bits) v: 4.5 Mesa 21.1.0-devel &#xA;  compat-v: 3.1 direct render: Yes &#xA;Audio:&#xA;  Device-1: Intel 82801I HD Audio vendor: Dell Inspiron 530 &#xA;  driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:293e &#xA;  class-ID: 0403 &#xA;  Device-2: AMD driver: snd_hda_intel v: kernel bus-ID: 01:00.1 &#xA;  chip-ID: 1002:aae0 class-ID: 0403 &#xA;  Sound Server-1: ALSA v: k5.4.0-77-generic running: yes &#xA;  Sound Server-2: PulseAudio v: 11.1 running: yes &#xA;Network:&#xA;  Device-1: Intel 82562V-2 10/100 Network vendor: Dell Inspiron 530 &#xA;  driver: e1000e v: 3.2.6-k port: ff00 bus-ID: 00:19.0 chip-ID: 8086:10c0 &#xA;  class-ID: 0200 &#xA;  IF: enp0s25 state: up speed: 100 Mbps duplex: full mac: &amp;lt;filter&amp;gt; &#xA;  IP v4: &amp;lt;filter&amp;gt; type: dynamic noprefixroute scope: global &#xA;  broadcast: &amp;lt;filter&amp;gt; &#xA;  IP v6: &amp;lt;filter&amp;gt; type: noprefixroute scope: link &#xA;  WAN IP: &amp;lt;filter&amp;gt; &#xA;Bluetooth:&#xA;  Message: No bluetooth data found. &#xA;Logical:&#xA;  Message: No logical block device data found. &#xA;RAID:&#xA;  Hardware-1: Intel SATA Controller [RAID mode] driver: ahci v: 3.0 port: f400 &#xA;  bus-ID: 00:1f.2 chip-ID: 8086.2822 rev: 02 class-ID: 0104 &#xA;Drives:&#xA;  Local Storage: total: 1.14 TiB used: 10.51 GiB (0.9%) &#xA;  SMART Message: Required tool smartctl not installed. Check --recommends &#xA;  ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT250MX500SSD1 &#xA;  size: 232.89 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s &#xA;  rotation: SSD serial: &amp;lt;filter&amp;gt; rev: 023 temp: 44 C scheme: MBR &#xA;  ID-2: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST1000LM014-1EJ164 &#xA;  size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s &#xA;  rotation: 5400 rpm serial: &amp;lt;filter&amp;gt; rev: SM11 temp: 41 C scheme: MBR &#xA;  Optical-1: /dev/sr0 vendor: TSSTcorp model: DVD+-RW TS-H653B rev: D300 &#xA;  dev-links: cdrom,cdrw,dvd,dvdrw &#xA;  Features: speed: 48 multisession: yes audio: yes dvd: yes &#xA;  rw: cd-r,cd-rw,dvd-r state: running &#xA;Partition:&#xA;  ID-1: / raw-size: 232.88 GiB size: 228.23 GiB (98.00%) &#xA;  used: 10.51 GiB (4.6%) fs: ext4 dev: /dev/sda1 maj-min: 8:1 label: N/A &#xA;  uuid: a816ea97-c8b4-4021-8956-87e8b030ad78 &#xA;Swap:&#xA;  Kernel: swappiness: 60 (default) cache-pressure: 100 (default) &#xA;  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 &#xA;  file: /swapfile &#xA;Unmounted:&#xA;  ID-1: /dev/sdb1 maj-min: 8:17 size: 118.85 GiB fs: ext4 label: N/A &#xA;  uuid: 22605079-ad0a-4a0a-9138-a6b9a1bb3c06 &#xA;  ID-2: /dev/sdb2 maj-min: 8:18 size: 1 KiB fs: &amp;lt;superuser required&amp;gt; &#xA;  label: N/A uuid: N/A &#xA;  ID-3: /dev/sdb5 maj-min: 8:21 size: 2 GiB fs: swap label: N/A &#xA;  uuid: ea8bf147-e28c-4131-9401-f45d7846dfb6 &#xA;  ID-4: /dev/sdb6 maj-min: 8:22 size: 810.67 GiB fs: ext4 label: N/A &#xA;  uuid: 63004dab-0841-4dd1-ac21-03f036f7d761 &#xA;USB:&#xA;  Hub-1: 1-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 &#xA;  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 &#xA;  Hub-2: 2-0:1 info: Full speed (or root) Hub ports: 6 rev: 2.0 &#xA;  speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900 &#xA;  Hub-3: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;  Hub-4: 4-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;  Hub-5: 5-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;  Hub-6: 5-1:2 info: Microsoft Internet Keyboard Pro ports: 3 rev: 1.1 &#xA;  speed: 12 Mb/s power: 64mA chip-ID: 045e:001c class-ID: 0900 &#xA;  Device-1: 5-1.1:3 info: Microsoft Natural Keyboard Pro type: Keyboard,HID &#xA;  driver: hid-generic,usbhid interfaces: 2 rev: 1.1 speed: 1.5 Mb/s &#xA;  power: 100mA chip-ID: 045e:001d class-ID: 0300 &#xA;  Device-2: 5-1.2:4 info: Microsoft Basic Optical Mouse v2.0 type: Mouse &#xA;  driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 1.5 Mb/s &#xA;  power: 100mA chip-ID: 045e:00cb class-ID: 0301 &#xA;  Hub-7: 6-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;  Hub-8: 7-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;  Hub-9: 8-0:1 info: Full speed (or root) Hub ports: 2 rev: 1.1 speed: 12 Mb/s &#xA;  chip-ID: 1d6b:0001 class-ID: 0900 &#xA;Sensors:&#xA;  System Temperatures: cpu: 52.0 C mobo: N/A &#xA;  Fan Speeds (RPM): N/A &#xA;Info:&#xA;  Processes: 164 Uptime: 37m wakeups: 0 Init: systemd v: 237 runlevel: 5 &#xA;  tool: systemctl Compilers: gcc: 7.5.0 alt: 7 Packages: apt: 1788 lib: 890 &#xA;  flatpak: 0 Shell: Bash v: 4.4.20 running-in: tty pts/0 (vt 7) inxi: 3.3.04 &#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3600" LastEditorUserId="3600" LastEditDate="2021-07-11T02:46:30.637" LastActivityDate="2021-07-11T03:08:14.467" Title="Hera 5.1 Stable installer boots to corrupted graphics on AMD 550RX 4GB" Tags="|system-installation|release-hera|graphic-drivers|graphics|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28170" PostTypeId="2" ParentId="28169" CreationDate="2021-07-11T03:08:14.467" Score="1" Body="&lt;h2&gt;SOLVED:&lt;/h2&gt;&#xA;&lt;p&gt;One thing I noticed while going through this old system was that it only had 2GB of RAM. I happened to have some memory laying around that worked for this system and after upgrading it to only 4GB of RAM and booting it up the 550RX fired right up.&lt;/p&gt;&#xA;&lt;p&gt;It appears that this GPU needs more than 2GB of system memory to function.&lt;/p&gt;&#xA;" OwnerUserId="3600" LastActivityDate="2021-07-11T03:08:14.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28173" PostTypeId="1" CreationDate="2021-07-12T20:40:51.000" Score="0" ViewCount="118" Body="&lt;p&gt;I tried everything I know to add a printer, but I get authentication error when I use CUPS. The other way, system-setting/printers does not work either. I edited the cupsd.conf file, but no luck. I added my user ID to the lpadmin group, still no luck. It is a bit frustrating, because I had no problem adding a printer to Raspberry PI 4. Any help would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="26338" LastActivityDate="2024-03-30T00:13:16.623" Title="Adding Printer Using CUPS" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28174" PostTypeId="2" ParentId="28160" CreationDate="2021-07-12T22:27:32.830" Score="0" Body="&lt;p&gt;insurance!  (There may be alternatives, that you do not need to install)&#xA;sudo apt install tree&#xA;for more information, info tree&lt;/p&gt;&#xA;&lt;p&gt;and then you launch the aforementioned command.&#xA;lucky.&lt;/p&gt;&#xA;" OwnerUserId="26342" LastActivityDate="2021-07-12T22:27:32.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28175" PostTypeId="2" ParentId="28077" CreationDate="2021-07-13T04:04:20.053" Score="0" Body="&lt;p&gt;I found the solution in this answer &lt;a href=&quot;https://askubuntu.com/a/796808/1198552&quot;&gt;https://askubuntu.com/a/796808/1198552&lt;/a&gt;&#xA;Created an &lt;code&gt;intel.conf&lt;/code&gt; file as explained in that answer which solved my problem.&lt;/p&gt;&#xA;" OwnerUserId="26159" LastActivityDate="2021-07-13T04:04:20.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28176" PostTypeId="2" ParentId="24951" CreationDate="2021-07-13T06:31:24.847" Score="1" Body="&lt;pre&gt;&lt;code&gt;gedit admin:///etc/modprobe.d/blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then add this line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;blacklist uvcvideo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26343" LastActivityDate="2021-07-13T06:31:24.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28177" PostTypeId="1" CreationDate="2021-07-13T18:10:33.180" Score="0" ViewCount="406" Body="&lt;p&gt;I really like Elementary OS 6 but I cannot get the KDEconnect indicator to work with the pantheon desktop.&#xA;If I open terminal, I can manually run up KDEconnect-settings and pair my android phone.&#xA;So the actual transfer of files works along with notifications from the phone all works.&#xA;But I can't reply to text messages (unless I use terminal and manually open KDEconnect-messaging).&#xA;It's like Pantheon desktop doesn't respond to standard applet calls from an app.&#xA;Is there an add in to Pantheon that will enable standard app notifications along with a working applet ?&#xA;Elementary OS 5.1 had this working (although the user had to jump through some hoops to get it to work)&lt;/p&gt;&#xA;&lt;p&gt;thanks in advance.&#xA;Rich&lt;/p&gt;&#xA;" OwnerUserId="26347" LastActivityDate="2021-07-17T09:41:08.313" Title="KDEConnect indicator not working with Pantheon desktop" Tags="|desktop|pantheon|notifications|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28178" PostTypeId="2" ParentId="28173" CreationDate="2021-07-13T18:26:57.303" Score="0" Body="&lt;p&gt;I figured it out, needed a bit of research, but on the printer manufacturer's web site I found an installation program that worked.&lt;/p&gt;&#xA;" OwnerUserId="26338" LastActivityDate="2021-07-13T18:26:57.303" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28179" PostTypeId="1" CreationDate="2021-07-14T09:19:24.347" Score="0" ViewCount="65" Body="&lt;p&gt;I wanted a way to lock applications so thought that using Screen Time and Limits, previously called Parental Controls, would be a smart way of doing this by locking applications like Code and Files behind a password.&lt;/p&gt;&#xA;&lt;p&gt;It hasn't worked.&lt;/p&gt;&#xA;&lt;p&gt;The problem I have now is those applications have gone from the applications menu and I cant find em. I have reinstalled Code from the App Center which worked but now it has no icon in the applications menu.&lt;/p&gt;&#xA;&lt;p&gt;How can I get these applications back?&lt;/p&gt;&#xA;&lt;p&gt;Would it be better to just create a new user and delete this one?&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know a good way to lock applications?&lt;/p&gt;&#xA;" OwnerUserId="26349" LastActivityDate="2024-03-30T18:07:15.887" Title="Funny bug with missing applications after using Screen Time &amp; Limits" Tags="|settings|pantheon-files|applications|code|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28180" PostTypeId="2" ParentId="28179" CreationDate="2021-07-14T13:27:44.537" Score="0" Body="&lt;p&gt;There are a number of reported issues relating to blocking apps but they do not exactly match yours. You can report your issue at &lt;a href=&quot;https://github.com/elementary/switchboard-plug-parental-controls/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-parental-controls/issues&lt;/a&gt;. Please make sure you give full details regarding which version of elementary you are using and any other relevant info.  Hopefully we can get this working properly by the time Odin is released and you will not need an alternative method.  There is an issue blocking default apps so you could try changing the default to something you do not use.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-07-14T13:27:44.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28181" PostTypeId="2" ParentId="28177" CreationDate="2021-07-14T22:05:37.127" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6qovD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6qovD.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please follow the next steps:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and enable on Pantheon with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;# change OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&#xA;sudo cp /usr/lib/systemd/user/indicator-application.service /etc/systemd/user&#xA;&#xA;systemctl --user start indicator-application.service &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then reboot your computer, after that disable the second wifi icon with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/wingpanel.d/ayatana.blacklist&#xA;# add &amp;quot;nm-applet&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;My Weather Indicator:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:atareao/atareao&#xA;sudo apt-get install my-weather-indicator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24867" LastEditorUserId="24867" LastEditDate="2021-07-14T22:23:49.723" LastActivityDate="2021-07-14T22:23:49.723" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28185" PostTypeId="2" ParentId="28177" CreationDate="2021-07-15T17:33:54.733" Score="1" Body="&lt;p&gt;I can confirm the instructions do work fine with Elementary OS 5.1 but not 6.&#xA;thanks for the tips though&lt;/p&gt;&#xA;" OwnerUserId="26347" LastActivityDate="2021-07-15T17:33:54.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28186" PostTypeId="1" AcceptedAnswerId="28310" CreationDate="2021-07-15T18:30:55.287" Score="1" ViewCount="136" Body="&lt;p&gt;I tried Beta 2 of elementary OS 6 and I admit to being very impressed.  If contact syncing is going to be added prior to release, you can count on me as a convert.  I'd love to move away from Thunderbird but so far, I have not seen an adequate replacement.&lt;/p&gt;&#xA;" OwnerUserId="26356" LastActivityDate="2021-08-10T20:58:21.430" Title="Will the mail client elementary OS 6 include contact syncing?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28187" PostTypeId="2" ParentId="27784" CreationDate="2021-07-16T06:44:39.983" Score="1" Body="&lt;p&gt;all stuff for icons/themes has to be put into a local folder of your session /home/name/.icons (create a hidden folder .icons)&#xA;why to put icons theme in systeme disk. On my own elementary i have all systeme folders untouchable, why to play the guy who want to do all stuff in the systeme folders. Don't touch them, you are not experienced,proof : you don't know what's going on now, just with icons folder...&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-07-16T06:44:39.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28188" PostTypeId="1" AcceptedAnswerId="28194" CreationDate="2021-07-16T06:52:46.190" Score="0" ViewCount="60" Body="&lt;p&gt;im actually living in tokyo and my system is setted to my native language (fr). But the format of day in the greeter are still in japanese like this 7月16.&#xA;Settings are only working for the session in the wingpanel (fr) but nothing change in the greeter.&#xA;How can i change it to fr?&lt;/p&gt;&#xA;&lt;p&gt;Thank you in advance.&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-07-17T12:08:45.680" Title="Change lang/region in Greeter" Tags="|greeter|time|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28189" PostTypeId="1" CreationDate="2021-07-16T07:09:47.580" Score="0" ViewCount="50" Body="&lt;p&gt;Installing the new version 6 beta 2  in virtualbox does not show all the options in sceen.&#xA;You have to &amp;quot;guess&amp;quot; and use TAB and ENTER to move trough the next screen and hope you hit it right&lt;/p&gt;&#xA;&lt;p&gt;Below an example during the installation&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wREQt.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wREQt.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26362" LastActivityDate="2023-12-29T01:08:25.983" Title="6.0 beta 2 - installation gui not completely visible in virtualbox" Tags="|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28191" PostTypeId="1" CreationDate="2021-07-17T07:58:34.583" Score="1" ViewCount="42" Body="&lt;p&gt;Elementary OS 5.1.7&lt;br /&gt;&#xA;Laptop: dell inspiron 7559&lt;/p&gt;&#xA;&lt;p&gt;Nvidia graphics is disable&lt;br /&gt;&#xA;&lt;code&gt;Kernel driver in use: i915&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;After my laptop wake up Pantheon refuse to respond on left click (touchpad doesn't work too). I can't use GUI, so I need to write&#xA;&lt;code&gt;sudo service lightdm restart&lt;/code&gt; to restart my session.&lt;/p&gt;&#xA;&lt;p&gt;I already tried to change mouse, but nothing changed.&lt;/p&gt;&#xA;&lt;p&gt;YT link: &lt;a href=&quot;https://youtu.be/z90Wd-DZQvI&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/z90Wd-DZQvI&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26367" LastActivityDate="2021-07-17T07:58:34.583" Title="Can't use mouse and touchpad after wake up" Tags="|suspend|pantheon|touchpad|mouse|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28193" PostTypeId="2" ParentId="28177" CreationDate="2021-07-17T09:41:08.313" Score="0" Body="&lt;p&gt;using the following instructions on a fresh install of OS 6 :-&lt;/p&gt;&#xA;&lt;p&gt;sudo apt install software-properties-common&#xA;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt-get update&#xA;sudo apt install indicator-application wingpanel-indicator-ayatana&lt;/p&gt;&#xA;&lt;p&gt;When I use the last command I get the error :-&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br /&gt;&#xA;Reading state information... Done&#xA;E: Unable to locate package wingpanel-indicator-ayatana&lt;/p&gt;&#xA;&lt;p&gt;If I try just :-&#xA;sudo apt install wingpanel-indicator-ayatana&lt;/p&gt;&#xA;&lt;p&gt;I still get :-&#xA;E: Unable to locate package wingpanel-indicator-ayatana&lt;/p&gt;&#xA;&lt;p&gt;I know the wingpanel-indicator-ayatana exists as under OS 5.1 it does install&#xA;I am wondering if the app only works on 5.1 and not 6&lt;/p&gt;&#xA;&lt;p&gt;Thanks for the reply&lt;/p&gt;&#xA;&lt;p&gt;Rich&lt;/p&gt;&#xA;" OwnerUserId="26347" LastActivityDate="2021-07-17T09:41:08.313" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28194" PostTypeId="2" ParentId="28188" CreationDate="2021-07-17T12:08:45.680" Score="0" Body="&lt;p&gt;Type in terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;localectl set-locale &amp;quot;LANG=fr_FR.UTF-8&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2021-07-17T12:08:45.680" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28195" PostTypeId="1" CreationDate="2021-07-17T12:14:55.710" Score="1" ViewCount="21" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E3MCy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E3MCy.png&quot; alt=&quot;Disabled wireless&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have both LAN and wireless network devices. The problem is, when I am trying to connect to a network it doesn't shows anything, Only giving a message that wifi disabled. But in settings, the wireless option is already enabled. How can I solve this problem?&lt;/p&gt;&#xA;" OwnerUserId="26369" LastActivityDate="2021-07-17T12:14:55.710" Title="Wireless Network Is not Working" Tags="|elementary-website|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28196" PostTypeId="1" CreationDate="2021-07-17T19:08:51.807" Score="0" ViewCount="17" Body="&lt;p&gt;I've installed elementary OS on a laptop and it's suspending automatically every 20 seconds. Someone have an idea of how can i resolve this? I can't even start the os, during boot, it suspends.&lt;/p&gt;&#xA;" OwnerUserId="26374" LastActivityDate="2023-12-18T22:01:15.177" Title="Laptop suspends automatically" Tags="|boot|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28197" PostTypeId="1" CreationDate="2021-07-19T15:56:56.840" Score="0" ViewCount="112" Body="&lt;p&gt;I installed Elementary OS on my HP Pavillon 15 with i7-1165G7 and Nvidia MX450 and it won't boot up after installation. I get an error on the black screen saying something like &lt;code&gt;rtw_pci: failed to wait firmware completion.&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If I try to boot in recovery mode it works (pretty bad though, with no Wi-Fi, no touchpad). So in recovery mode I tried do install all the software updates from the App Center. Nothing changed.&lt;/p&gt;&#xA;&lt;p&gt;Then I tried to install the nvidia driver from the App Center and after that it won't boot even in recovery mode showing black screen and ticking cursor.&lt;/p&gt;&#xA;&lt;p&gt;I tried to install several times, with and without internet connection.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestion? Thank you.&lt;/p&gt;&#xA;" OwnerUserId="26383" LastActivityDate="2023-12-09T06:02:45.293" Title="Elementary OS won't boot up after installing" Tags="|dual-boot|laptop|error|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28199" PostTypeId="1" AcceptedAnswerId="28202" CreationDate="2021-07-20T07:53:34.443" Score="1" ViewCount="234" Body="&lt;p&gt;I have a Huawei Matebook D15 laptop. Precise model is BOD-WWX9-PCB. It has latest 11th gen Intel Core i5-1135G7 CPU which comes with Intel Iris Xe graphics.&lt;/p&gt;&#xA;&lt;p&gt;Main problem is - when I tried live-usb to check if necessary software (VMware Horizon client) for my job is working correctly, I connected to Host server and instead of seeing working environment I saw black screen.&lt;/p&gt;&#xA;&lt;p&gt;I am not sure what can be the exact reason, but I am sure for the most part it's not VMware problem, because both Pop_OS! 21.04 and Fedora 34 live-usb worked with VMWare Horizon out of the box.&lt;/p&gt;&#xA;&lt;p&gt;So what should I do? Should I try installing 5.1.7 and manually updating the kernel to latest or hope that 5.8 (or whatever it is) is elementary OS 6 will support latest intel graphics?&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions are greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="26363" LastActivityDate="2021-07-20T16:35:03.110" Title="Is elementary OS 5.1.7 “Hera” supported on Intel 11th Gen Mobile Processors?" Tags="|graphic-drivers|graphics|intel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28200" PostTypeId="1" CreationDate="2021-07-20T12:54:29.017" Score="0" ViewCount="173" Body="&lt;p&gt;How can I add buttons in elementary OS so that I can minimize windows, for example, to the lower dock?&lt;/p&gt;&#xA;&lt;p&gt;The lack of such a button is not convenient for me... if I go into a game and I don't need the Steam window to be on the screen, on Ubuntu I always minimize the Steam screen. I'd like to do the same in elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="26386" LastEditorUserId="84" LastEditDate="2021-07-27T20:25:50.143" LastActivityDate="2021-09-08T14:24:03.393" Title="How to add a button for minimizing the window?" Tags="|window-manager|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28202" PostTypeId="2" ParentId="28199" CreationDate="2021-07-20T16:35:03.110" Score="0" Body="&lt;p&gt;pop os uses the 5.11 kernel, fedora 34 kernel 5.12.&#xA;Try a manual update.&#xA;i did it for my dell to 5.14 and updated manually all missing firmware i915.&#xA;firmware package &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-07-20T16:35:03.110" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28203" PostTypeId="1" CreationDate="2021-07-21T01:02:59.590" Score="0" ViewCount="136" Body="&lt;p&gt;I searched and found similar issues from years ago but the fixes do not work. I have a new Dell XPS 15 running elementary OS 5.1.7 and the brightness controls do not work. Here's what nvidia-smi is reporting:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;+-----------------------------------------------------------------------------+&#xA;| NVIDIA-SMI 450.142.00   Driver Version: 450.142.00   CUDA Version: 11.0     |&#xA;|-------------------------------+----------------------+----------------------+&#xA;| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |&#xA;| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |&#xA;|                               |                      |               MIG M. |&#xA;|===============================+======================+======================|&#xA;|   0  GeForce GTX 1650    Off  | 00000000:01:00.0 Off |                  N/A |&#xA;| N/A   46C    P0     5W /  N/A |      5MiB /  3914MiB |      0%      Default |&#xA;|                               |                      |                  N/A |&#xA;+-------------------------------+----------------------+----------------------+&#xA;                                                                               &#xA;+-----------------------------------------------------------------------------+&#xA;| Processes:                                                                  |&#xA;|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |&#xA;|        ID   ID                                                   Usage      |&#xA;|=============================================================================|&#xA;|    0   N/A  N/A      1161      G   /usr/lib/xorg/Xorg                  4MiB |&#xA;+-----------------------------------------------------------------------------+&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;...and neofetch:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OS: elementary OS 5.1.7 Hera x86\_64&#xA;&#xA;Host: XPS 15 7590 &#xA;&#xA;Kernel: 5.4.0-80-generic &#xA;GPU: NVIDIA NVIDIA Corporation Device 1f91 &#xA;&#xA;GPU: Intel Device 39b Memory: 2276MiB / 15647MiB&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any ideas on how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="23829" LastEditorUserId="26" LastEditDate="2021-08-05T20:29:25.213" LastActivityDate="2021-08-05T20:29:25.213" Title="Brightness controls not working on Dell XPS 15 with Nvidia GPU" Tags="|nvidia|brightness|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28204" PostTypeId="1" CreationDate="2021-07-21T03:00:03.160" Score="2" ViewCount="637" Body="&lt;p&gt;I'm thinking about making a switch from Windows to elementary OS. Could you tell me whether my laptop's processor, an Intel(R) Core(TM)2 Duo CPU U9300 @ 1.20GHz would be appropriate and suitable?&lt;/p&gt;&#xA;" OwnerUserId="26389" LastEditorUserId="26" LastEditDate="2021-08-03T22:49:36.190" LastActivityDate="2021-08-03T22:49:36.190" Title="Will elementary OS run on an Intel Core 2 Duo U9300?" Tags="|system-installation|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28206" PostTypeId="2" ParentId="28203" CreationDate="2021-07-21T21:56:22.743" Score="1" Body="&lt;p&gt;Maybe this is a kernel compatibility problem, maybe because your laptop is very new the screen brightness module is not yet built in 5.4.0-80-generic, try installing a more recent kernel.&lt;/p&gt;&#xA;&lt;p&gt;If you'd like to try i suggest the &lt;a href=&quot;https://liquorix.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Liquorix kernel&lt;/a&gt; or the &lt;a href=&quot;https://xanmod.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Xanmod kernel&lt;/a&gt;, our maybe just install a mainline kernel with &lt;a href=&quot;https://github.com/bkw777/mainline&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu Mainline Kernel Installer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2021-07-21T21:56:22.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28208" PostTypeId="2" ParentId="28200" CreationDate="2021-07-21T22:07:13.370" Score="0" Body="&lt;p&gt;You can add the minimize button with the &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary Tweaks&lt;/a&gt; application, you can install it by adding PPA support in Elementary OS running the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then running the following commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks&#xA;sudo apt install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2021-07-21T22:07:13.370" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28209" PostTypeId="2" ParentId="28197" CreationDate="2021-07-21T22:15:40.203" Score="0" Body="&lt;p&gt;Maybe this is a graphics card problem, when installing Elementary OS did you select to install proprietary drivers?&lt;/p&gt;&#xA;&lt;p&gt;When you use Nvidia graphics it is advised to do so, to install such drivers during the installation just select the box that says&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Install third-party software for graphics and WI-FI hardware and additional media formats&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="20044" LastActivityDate="2021-07-21T22:15:40.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28210" PostTypeId="2" ParentId="28204" CreationDate="2021-07-21T23:04:59.130" Score="2" Body="&lt;p&gt;Elementary OS recommended system specifications for the best experience:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;1024×768 display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;You could try, but in my opinion you should pick a lightweight GNU/Linux distributions(Xubuntu, Lubuntu etc.) can be better experience.&lt;/p&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2021-07-21T23:04:59.130" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28211" PostTypeId="1" CreationDate="2021-07-21T23:35:11.027" Score="0" ViewCount="90" Body="&lt;p&gt;Does the following report indicate I &lt;em&gt;should&lt;/em&gt; have functioning Bluetooth, or does it only &lt;em&gt;indicate&lt;/em&gt; the software bits are in play? I haven't found a mechanism that tells me how to confirm my Bluetooth address or device name:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo service bluetooth status&#xA;● bluetooth.service - Bluetooth service&#xA;   Loaded: loaded (/lib/systemd/system/bluetooth.service; enabled; vendor preset: enabled)&#xA;   Active: active (running) since Wed 2021-07-21 15:46:10 MDT; 23min ago&#xA;     Docs: man:bluetoothd(8)&#xA; Main PID: 2432 (bluetoothd)&#xA;   Status: &amp;quot;Running&amp;quot;&#xA;    Tasks: 1 (limit: 4653)&#xA;   CGroup: /system.slice/bluetooth.service&#xA;           └─2432 /usr/lib/bluetooth/bluetoothd&#xA;&#xA;Jul 21 15:46:10 backhoe systemd[1]: Starting Bluetooth service...&#xA;Jul 21 15:46:10 backhoe bluetoothd[2432]: Bluetooth daemon 5.48&#xA;Jul 21 15:46:10 backhoe systemd[1]: Started Bluetooth service.&#xA;Jul 21 15:46:10 backhoe bluetoothd[2432]: Starting SDP server&#xA;Jul 21 15:46:10 backhoe bluetoothd[2432]: Bluetooth management interface 1.14 initialized&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm confused by my evidence:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;other CLI commands report nothing, similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/10617/how-to-debug-bluetooth&quot;&gt;How to debug bluetooth&lt;/a&gt; question&lt;/li&gt;&#xA;&lt;li&gt;cell and laptop don't recognize each other--cell confirmed&#xA;elsewhere&lt;/li&gt;&#xA;&lt;li&gt;Applications/System Tools/System Settings/Bluetooth has yet to discover and list any device; my phone does although that could be anecdotal with nothing to compare to&lt;/li&gt;&#xA;&lt;li&gt;System Settings calls my device &amp;quot;unknown&amp;quot; while discovering&lt;/li&gt;&#xA;&lt;li&gt;Wingpanel Bluetooth status icon is absent and apt tells me wingpanel-indicator-bluetooth is already installed&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;One doable thing I'm avoiding is opening the hood to see if there's actually a standard OEM antenna inside. Finding a physical antenna and daugherboard would only tell me it might work, and Murphy's law states I'll break something--although this Dell was designed for easy repair.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2021-07-29T13:51:07.197" Title="How to confirm Bluetooth is actually available?" Tags="|release-hera|bluetooth|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28212" PostTypeId="2" ParentId="28204" CreationDate="2021-07-22T18:38:20.867" Score="0" Body="&lt;p&gt;Well given that I've now become better acquainted with them, I'll soon seek to make those processor upgrades for elementary OS to be installed upon my laptop in accordance with these prerequisites. Again thank you a great deal, much more and so on.&lt;/p&gt;&#xA;" OwnerUserId="26393" LastEditorUserId="26393" LastEditDate="2021-07-25T18:51:34.197" LastActivityDate="2021-07-25T18:51:34.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28214" PostTypeId="2" ParentId="28203" CreationDate="2021-07-23T00:46:27.270" Score="1" Body="&lt;p&gt;Actually it turns out to be an OLED issue with all Linux distros. Returning the laptop and purchasing one that doesn’t have an OLED display.&lt;/p&gt;&#xA;" OwnerUserId="23829" LastActivityDate="2021-07-23T00:46:27.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28215" PostTypeId="2" ParentId="25446" CreationDate="2021-07-23T13:07:00.833" Score="0" Body="&lt;p&gt;Can we have an official answer here please ?&lt;/p&gt;&#xA;&lt;p&gt;I was also looking for this and I couldn't find anything related to it.&lt;/p&gt;&#xA;&lt;p&gt;So, would it be possible to upgrade from 5.1 to 6 once it is out ?&lt;/p&gt;&#xA;" OwnerUserId="596" LastActivityDate="2021-07-23T13:07:00.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28217" PostTypeId="1" CreationDate="2021-07-25T03:09:42.000" Score="1" ViewCount="82" Body="&lt;p&gt;While I'm using a multiple monitor setup, I tend to check the bottom of the screen I'm looking at for the dock. Is it possible to get the dock on all the screens I have?&lt;/p&gt;&#xA;&lt;p&gt;If it's a mini-dock - which keeps icons only for the windows that are available on the screen in question - would be better than the full dock.&lt;/p&gt;&#xA;&lt;p&gt;If it's not possible, is there a way to suggest this as a feature to Elementary Team?&lt;/p&gt;&#xA;&lt;p&gt;I feel most of the people with multiple monitor setup, face this annoyance.&lt;/p&gt;&#xA;" OwnerUserId="22786" LastActivityDate="2021-07-25T03:09:42.000" Title="Is it possible to have separate docks for each monitor in a multy monitor setup?" Tags="|plank|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28218" PostTypeId="2" ParentId="1283" CreationDate="2021-07-25T20:23:57.003" Score="0" Body="&lt;p&gt;Check this GitHub issue in the official Elementary OS repo &lt;a href=&quot;https://github.com/elementary/switchboard-plug-keyboard/issues/69&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-keyboard/issues/69&lt;/a&gt;. It's a long story but it helps...&lt;/p&gt;&#xA;" OwnerUserId="22709" LastActivityDate="2021-07-25T20:23:57.003" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28219" PostTypeId="1" CreationDate="2021-07-25T23:57:47.983" Score="0" ViewCount="88" Body="&lt;ul&gt;&#xA;&lt;li&gt;PC: Lenovo Laptop G510&lt;/li&gt;&#xA;&lt;li&gt;CPU: Intel Core i5 HD 4600 graphics&lt;/li&gt;&#xA;&lt;li&gt;Res: 1366x768&#xA;So, I have an RCA small TV connected via VGA port that I use as a monitor since my laptop's built-in screen is messed up. For a few days, it was working perfectly fine, it detected the TV as RCA; and when I mirrored the display the res was fine.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Recently out of nowhere the RCA TV says &amp;quot;Unknown Display&amp;quot; and the res is set to 1024x768, I cannot change it to 1366x768, how it usually was.&lt;/p&gt;&#xA;&lt;p&gt;Any help is appreciated, I don't know what to do.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Q1dzf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q1dzf.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/BOUBT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BOUBT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26401" LastActivityDate="2023-12-25T05:05:55.657" Title="Unknown Display 1024x768 External Monitor (Mirror Display)" Tags="|settings|display|intel|resolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28220" PostTypeId="1" CreationDate="2021-07-26T01:48:18.213" Score="1" ViewCount="38" Body="&lt;p&gt;So I recently downloaded ubuntu with a specific tutorial because I use legacy mode to boot up windows and linux, but I haven't found any tutorials to download ElementaryOS with legacy/bios mode, so since ElementaryOS is based off Ubuntu, would I be able to download it the same way?&lt;/p&gt;&#xA;&lt;p&gt;I've already created the install drive with rufus, and I plan to download ElementaryOS on a seperate partition, but I also plan on using EasyBCD to correctly duel boot.&lt;/p&gt;&#xA;&lt;p&gt;tutorial link: &lt;a href=&quot;https://www.youtube.com/watch?v=-iSAyiicyQY&amp;amp;ab_channel=KskRoyal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.youtube.com/watch?v=-iSAyiicyQY&amp;amp;ab_channel=KskRoyal&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If anyone knows any tutorials for ElementaryOS in legacy/bios mode, please share, any advice would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="26402" LastActivityDate="2021-07-26T01:48:18.213" Title="Can I install ElementaryOS the same way as ubuntu?" Tags="|software-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28221" PostTypeId="1" AcceptedAnswerId="28222" CreationDate="2021-07-27T08:19:20.480" Score="2" ViewCount="26" Body="&lt;p&gt;Whenever I power up my system, I am automatically logged in. I never get prompted to type in my password. However, if I suspend the system (either from the power menu or by closing my laptop) I &lt;em&gt;do&lt;/em&gt; get the password prompt.&lt;/p&gt;&#xA;&lt;p&gt;In &lt;code&gt;System Settings -&amp;gt; Security &amp;amp; Privacy -&amp;gt; Locking&lt;/code&gt; I have both options turned on.&lt;/p&gt;&#xA;&lt;p&gt;How do I fix this? I expect a password prompt on power up.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;System info&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS 5.1.7 Hera&#xA;Built on Ubuntu 18.04.4 LTS&#xA;Linux 4.15.0-151-generic&#xA;GTK 3.22.30&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26414" LastActivityDate="2021-07-27T10:19:14.913" Title="System is unlocked on power up" Tags="|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28222" PostTypeId="2" ParentId="28221" CreationDate="2021-07-27T10:19:14.913" Score="3" Body="&lt;p&gt;If you go to &lt;code&gt;System Settings&lt;/code&gt; -&amp;gt; &lt;code&gt;User Accounts&lt;/code&gt;, and click your account, you'll see the option &lt;code&gt;Log In automatically&lt;/code&gt;. Make sure it is disabled.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/IT3ze.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IT3ze.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;NOTE: You'll need to click the &lt;a href=&quot;https://i.stack.imgur.com/a2xUo.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a2xUo.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt; button in order to make changes to your account.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2021-07-27T10:19:14.913" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28223" PostTypeId="1" CreationDate="2021-07-27T14:46:33.290" Score="0" ViewCount="203" Body="&lt;p&gt;I am on elementary OS 5.1.7 and trying to install elementary OS 6 beta 2. I used Etcher to create my live USB. However, when booting up from the live USB, I am only getting a blank screen.I am on AMD A8-7680 Radeon R7. This is what running lspci inside the eOS beta gives me:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] (rev e2) (prog-if 00 [VGA controller])&#xA;    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Radeon R7 Graphics&#xA;    Flags: bus master, fast devsel, latency 0, IRQ 11&#xA;    Memory at d0000000 (64-bit, prefetchable) [size=256M]&#xA;    Memory at e0000000 (64-bit, prefetchable) [size=8M]&#xA;    I/O ports at f000 [size=256]&#xA;    Memory at feb00000 (32-bit, non-prefetchable) [size=256K]&#xA;    Expansion ROM at 000c0000 [disabled] [size=128K]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel modules: amdgpu&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried putting nomodeset to the grub config before booting up, and it does start. However, the graphics is big and low quality. It also shows this error before showing the display:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;*ERROR* VGACON disables amdgpu kernel modesetting.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I searched for this error and tried setting these boot options:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;amdgpu.dc=0 amdgpu.si_support=1 amdgpu.cik_support=1 radeon.cik_support=0 radeon.si_support=0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But it does nothing. The screen just shows my motherboard's splash screen (not the eOS splash screen).&lt;/p&gt;&#xA;" OwnerUserId="24294" LastActivityDate="2024-01-03T16:03:20.407" Title="AMDGPU problems installing elementary OS 6 beta 2" Tags="|grub|graphics|amd|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28224" PostTypeId="2" ParentId="81" CreationDate="2021-07-27T16:16:22.403" Score="1" Body="&lt;p&gt;None of the above solutions work at the moment. Following method works fine (tested in elementary OS 6 ODIN and OS 5).&lt;/p&gt;&#xA;&lt;p&gt;Full guide: &lt;a href=&quot;https://www.debugpoint.com/2021/07/change-lock-login-screen-background-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.debugpoint.com/2021/07/change-lock-login-screen-background-elementary-os/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/l0LjL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/l0LjL.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Open a terminal in your elementary OS.&#xA;Install git and following dependencies for greeter package.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install git&#xA;&#xA;sudo apt install -y gnome-settings-daemon libaccountsservice-dev libgdk-pixbuf2.0-dev libgranite-dev libgtk-3-dev libhandy-1-dev liblightdm-gobject-1-dev libmutter-6-dev libwingpanel-dev libx11-dev meson valac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Go to temporary /tmp directory and clone the latest greeter master branch from GitHub.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp&#xA;git clone https://github.com/elementary/greeter.git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After cloning is complete, open the path /tmp/greeter/data in a file manager.&lt;/p&gt;&#xA;&lt;p&gt;Rename your desired wallpaper image with texture.png and overwrite the following file in the path /tmp/greeter/data/texture.png&lt;/p&gt;&#xA;&lt;p&gt;Open the file /tmp/greeter/compositor/SystemBackground.vala in a text editor and replace the following line -&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;resource:///io/elementary/desktop/gala/texture.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;resource:///io/elementary/greeter/texture.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save the file.&lt;/p&gt;&#xA;&lt;p&gt;Open the terminal again and build greeter using the following commands.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /tmp/greeter&#xA;meson _build --prefix=/usr&#xA;sudo ninja install -C _build&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;All done. Test using -&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;lightdm --test-mode --debug&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26426" LastActivityDate="2021-07-27T16:16:22.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28225" PostTypeId="2" ParentId="22332" CreationDate="2021-07-27T16:39:46.593" Score="0" Body="&lt;p&gt;I'm having the same issue. I installed Slack via the AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;I've also tried Slack installed via snap and the .deb package using Eddy. I get the same results with each approach.&lt;/p&gt;&#xA;" OwnerUserId="18611" LastEditorUserId="18611" LastEditDate="2021-07-27T16:48:16.197" LastActivityDate="2021-07-27T16:48:16.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28226" PostTypeId="6" CreationDate="2021-07-27T22:15:48.817" Score="0" Body="&lt;h1 id=&quot;waldyrious-gq3e&quot;&gt;waldyrious&lt;/h1&gt;&#xA;&lt;p&gt;I discovered elementary OS user back in 2014 (in 0.2 Luna) and it's been my main distro ever since. I was one of the first users of the StackExchange site, and as I accumulated reputation, I've always strived to put the privileges I progressively gained into good use: by commenting and voting in questions and answers, proposing edits, and later helping with the moderation queues.&lt;/p&gt;&#xA;&lt;p&gt;I've been less active in the community for a while as I was assigned macbooks in my past two jobs, but I recently joined a new company where they allowed me to have a Linux laptop, so I'm getting back to more active use of elementary OS. I saw the banner about the moderator elections, and thought I'd step up to help.&lt;/p&gt;&#xA;&lt;p&gt;As a moderator, I expect to work in a mostly hands-off fashion, helping out in the background to clean up queues, review moderation requests, that sort of thing. I personally love organizing content (I do a lot of categorization work in Wikimedia wikis), so I will probably be active in tag management, helping with adding, improving and normalizing tag wikis and excerpts.&lt;/p&gt;&#xA;&lt;p&gt;Happy to submit myself to the community's consideration!&lt;/p&gt;&#xA;" OwnerUserId="84" LastEditorUserId="84" LastEditDate="2021-07-27T22:15:48.817" LastActivityDate="2021-07-27T22:15:48.817" CommentCount="0" CommunityOwnedDate="2021-07-27T22:15:48.817" ContentLicense="CC BY-SA 4.0" />
  <row Id="28227" PostTypeId="1" CreationDate="2021-07-28T02:42:22.697" Score="1" ViewCount="22" Body="&lt;p&gt;Can Elementary OS 5 and Elementary OS 6 in Alienware Area 51M?&lt;/p&gt;&#xA;&lt;p&gt;My laptop is Alienware Area 51M, which is my main workstation. Currently it runs with Ubuntu 20.04 desktop 64bit LTS. But I plan to install Elementary OS 5 (or OS 6).&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="26433" LastActivityDate="2021-07-28T09:01:08.110" Title="Can Elementary OS 5 and 6 run in Alienware Area 51M laptop?" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28228" PostTypeId="2" ParentId="28227" CreationDate="2021-07-28T09:01:08.110" Score="1" Body="&lt;p&gt;Yes, Elementary OS 5 and OS 6 should be able to run on the recent Alienware notebooks. That said, given that your hardware is pretty new, you will want to use OS 6 as it ships with the newer kernel that supports your processor (10th Gen Intel), Nvidia graphics card, network devices, and other hardware. OS 5 is based on Ubuntu 18.04 LTS so, while it may install, the hardware will not operate at its potential.&lt;/p&gt;&#xA;&lt;p&gt;As you have already installed Ubuntu 20.04 on the notebook, be sure to note which devices worked out of the box and which ones needed a little attention after installation. You will likely need to repeat those same steps on OS 6.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-07-28T09:01:08.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28229" PostTypeId="1" AcceptedAnswerId="28230" CreationDate="2021-07-28T13:59:20.093" Score="0" ViewCount="21" Body="&lt;p&gt;Yup, so my concern is those two&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;What if I need to download ISO again? Will I have to repurchase it?&lt;/li&gt;&#xA;&lt;li&gt;Will they take money or I've got it for free?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26445" LastActivityDate="2021-07-28T14:13:35.913" Title="Hey so I've &quot;bought&quot; elementaryOS but no money got pulled from my card nor get a confrimation" Tags="|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28230" PostTypeId="2" ParentId="28229" CreationDate="2021-07-28T14:13:35.913" Score="0" Body="&lt;p&gt;To answer your questions:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Q1 — What if I need to download ISO again? Will I have to repurchase it?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;You will not need to repurchase the ISO if you need to download it again (though I'm sure the Elementary developers would be thankful for some additional funding). Instead, what you can do is:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Click on the &amp;quot;$ Custom&amp;quot; box sandwiched between $30 and the &amp;quot;Purchase&amp;quot; button:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/JaHME.png&quot; alt=&quot;Pay What You Want&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Enter &amp;quot;0&amp;quot;:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/j5rfh.png&quot; alt=&quot;Goose Egg&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Press &amp;quot;Download elementary OS&amp;quot; to begin your download&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;strong&gt;Q2 — Will they take money or I've got it for free?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Payments are handled by Stripe and can sometimes have a slight delay, though this is rare. If you have not seen any payment come out of your credit card by this time tomorrow and you would &lt;em&gt;really like to&lt;/em&gt; contribute to the project, consider returning to &lt;a href=&quot;https://elementary.io&quot; rel=&quot;nofollow noreferrer&quot;&gt;the elementary OS site&lt;/a&gt; and try again.&lt;/p&gt;&#xA;&lt;p&gt;Thank you for supporting the eOS project &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-07-28T14:13:35.913" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28231" PostTypeId="1" CreationDate="2021-07-28T14:41:56.323" Score="0" ViewCount="43" Body="&lt;p&gt;I have a Lenovo Yoga c940 with eOS dual boot. I cleared the eOS partition using Windows disk management tool and reinstalled eOS on the empty space. I want to do it one more time (for reasons that are not important). However, during boot now, I have multiple instances of Linux boot hard drive (with the same ID). Is there a way to clear the Linux partition, delete all options except windows, so that I can reinstall eOS and have only 2 options, Win and eOS?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aKih1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aKih1.jpg&quot; alt=&quot;Laptop Boot menu during boot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Fvnwj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Fvnwj.jpg&quot; alt=&quot;Gparted partitions&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14971" LastEditorUserId="14971" LastEditDate="2021-07-28T15:01:35.957" LastActivityDate="2024-01-18T10:08:31.040" Title="After reinstalling Linux on dual Boot, I have multiple boot options" Tags="|dual-boot|microsoft-windows|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28234" PostTypeId="2" ParentId="28211" CreationDate="2021-07-29T13:51:07.197" Score="1" Body="&lt;p&gt;Elementary is based on Ubuntu 18.04 and use an old Kernel (5.4). The only way for me to use my Bluetooth devices was upgrade to newest kernel (5.13.4)&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo 'deb http://deb.xanmod.org releases main' | sudo tee /etc/apt/sources.list.d/xanmod-kernel.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;GPG key:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -qO - https://dl.xanmod.org/gpg.key | sudo apt-key --keyring /etc/apt/trusted.gpg.d/xanmod-kernel.gpg add -&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Then update and install:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt install linux-xanmod&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;more info: &lt;a href=&quot;https://xanmod.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://xanmod.org/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U4Vup.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U4Vup.png&quot; alt=&quot;Elementary Kernel 5.13&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26453" LastActivityDate="2021-07-29T13:51:07.197" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28235" PostTypeId="2" ParentId="28064" CreationDate="2021-07-29T14:11:12.077" Score="0" Body="&lt;p&gt;You can find the snap apps executables with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ls /snap/bin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and then&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/snap/bin/./&amp;lt;name of the app you want to run here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26453" LastActivityDate="2021-07-29T14:11:12.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28236" PostTypeId="1" CreationDate="2021-07-29T15:39:56.100" Score="1" ViewCount="98" Body="&lt;p&gt;After installing Elementary (latest version, July 2021) from a USB stick, computer get's UEFI errors when rebooted. The only way to get the installation correct is to disable UEFI and use legacy support, Elementary then works OK. It seems that GRUB is not properly installed/configured, the 1st time installation actually showed a GRUB error. In this same computer I just installed Ubuntu 20 LTS on UEFI and it works w/o issues (Ubuntu and most Linux distros use GRUB, Elementary seems to use GRUB2). My laptop is a Lenovo Idea Pad 5 Flex (end of 2020 model).&lt;/p&gt;&#xA;" OwnerUserId="26454" LastActivityDate="2023-12-18T23:06:50.813" Title="Installation on UEFI fails" Tags="|uefi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28237" PostTypeId="2" ParentId="11064" CreationDate="2021-07-29T17:16:52.090" Score="0" Body="&lt;p&gt;I have a simple and effective solution, and I recommend using this. There is a program which uses a trusted Apple key to access iPhone files. It's called &lt;a href=&quot;https://github.com/libimobiledevice/ifuse&quot; rel=&quot;nofollow noreferrer&quot;&gt;ifuse&lt;/a&gt;, and it's on the Ubuntu repository. Just enter on the terminal:&#xA;&lt;code&gt;sudo apt install ifuse&lt;/code&gt;.&#xA;After installing, reboot and try to mount the iPhone again.&lt;/p&gt;&#xA;" OwnerUserId="25686" LastEditorUserId="84" LastEditDate="2021-07-30T21:43:35.630" LastActivityDate="2021-07-30T21:43:35.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28238" PostTypeId="1" CreationDate="2021-07-29T17:34:42.367" Score="0" ViewCount="63" Body="&lt;p&gt;just wondered if anyone would be able to help me install elementary os?&lt;/p&gt;&#xA;&lt;p&gt;I installed it years ago and it was great but I'm having a headache trying to install it on a newer laptop, and haven't used linux or windows for years.&lt;/p&gt;&#xA;&lt;p&gt;I have a lenovo ideapad 1 (11ADA05) with windows 10 amd 3020e. I used etcher to burn the iso to a USB it didn't boot, so reset the boot order and I had a verification fail. I turned off secure boot and I could boot in to elementary.&lt;/p&gt;&#xA;&lt;p&gt;When I tried elementary, I had no wifi (windows says the adapter is a realtek 8822ce.)&lt;/p&gt;&#xA;&lt;p&gt;But biggest issue is when I look at gparted I can only see the usb drive. So when I try to install elementary it won't see the ssd, which is a ramaxel 64gb emmc drive.&lt;/p&gt;&#xA;&lt;p&gt;I'm not sure if their are any more bios settings I can monkey around with? And when exiting elementary I'm sure I see an error but it doesn't stay up long enough for me to see what it says.&lt;/p&gt;&#xA;&lt;p&gt;Any help, would be greatly appreciated.&lt;/p&gt;&#xA;&lt;p&gt;Rob&lt;/p&gt;&#xA;" OwnerUserId="26455" LastEditorUserId="26455" LastEditDate="2021-07-29T20:12:46.497" LastActivityDate="2021-07-29T20:12:46.497" Title="How do I install linux?" Tags="|install|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28239" PostTypeId="1" CreationDate="2021-07-29T21:27:28.273" Score="0" ViewCount="458" Body="&lt;p&gt;good afternoon to you, so I have installed Elementary OS and find it very beautiful however it seems like the OS does not recognize my WI-FI adapter.&lt;/p&gt;&#xA;&lt;p&gt;I am using a Lenovo Ideapad 3 and I do not have an ethernet port on this laptop. I was going to use the following commands to install the drivers for the adapter but no internet I'm not sure how I would even get the drivers unless I put them on a USB?&lt;/p&gt;&#xA;&lt;p&gt;this is the website I'm going off, does someone have any idea what I could do in this situation?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary-os-solutions.blogspot.com/2019/01/wifi-not-working-in-elementary-os-juno.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary-os-solutions.blogspot.com/2019/01/wifi-not-working-in-elementary-os-juno.html&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26457" LastActivityDate="2023-12-23T04:03:35.413" Title="WIFI not showing up in OS" Tags="|wifi|drivers|internet|amd|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28242" PostTypeId="1" AcceptedAnswerId="28244" CreationDate="2021-07-30T17:47:49.460" Score="0" ViewCount="3249" Body="&lt;p&gt;I'm trying to install elementary OS 6 Odin, beta 2, next to Windows 10. I selected &lt;em&gt;Custom installation&lt;/em&gt; in Czech, chose the EFI partition for &lt;code&gt;/boot/efi&lt;/code&gt;, an empty ext4 partition for &lt;code&gt;/&lt;/code&gt; and a swap partition for swap. The installation starts, but it &lt;strong&gt;gets stuck at 70 %&lt;/strong&gt;. The last output in the terminal is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;INFO: The following packages will be removed:&#xA;INFO:   btrfs-progs* casper* cifs-utils* discover* discover-data* distinst* dmraid*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;(the list of packages continues on)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;INFO: 0 updated, 0 installed, 42 to remove and 0 updated&#xA;INFO: After this operation, 42 MB will be freed on the disk.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've tried to install the system many times, I even tried waiting for almost an hour, but to no avail. All of the partitions were freshly formatted with gparted.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: Also tested with the latest Release Candidate (&lt;code&gt;elementaryos-6.0-stable.20210805-rc.iso&lt;/code&gt;), the problem remains.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: Also tested with the stable elementary 6&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2021-08-11T11:35:51.797" LastActivityDate="2021-10-13T08:27:02.200" Title="Odin installation stuck at 70%" Tags="|system-installation|release-odin|" AnswerCount="3" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28243" PostTypeId="1" CreationDate="2021-07-30T18:18:25.507" Score="1" ViewCount="47" Body="&lt;p&gt;Elementary has stopped updating anything, giving the error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;E: Encountered a section with no Package: header&#xA;E: Problem with MergeList /var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_xenial-security_main_binary-all_Packages&#xA;E: The package lists or status file could not be parsed or opened&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Please can anyone suggest what I might do about it.&lt;/p&gt;&#xA;" OwnerUserId="26464" LastEditorUserId="26" LastEditDate="2021-08-03T22:47:17.140" LastActivityDate="2021-08-03T22:47:17.140" Title="OS not updating anything" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28244" PostTypeId="2" ParentId="28242" CreationDate="2021-07-30T18:19:50.160" Score="3" Body="&lt;p&gt;I tried doing the installation in English (US) and &lt;s&gt;not adding swap&lt;/s&gt;. It fixed the issue.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;: The problem is the language, not the swap. I tried installing again in US English but &lt;em&gt;with&lt;/em&gt; a swap partition and it worked fine. Instalation in Czech failed.&lt;/p&gt;&#xA;&lt;p&gt;I've &lt;a href=&quot;https://github.com/elementary/installer/issues/591&quot; rel=&quot;nofollow noreferrer&quot;&gt;reported this&lt;/a&gt; as a bug in the elementary installer.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2021-08-11T19:42:47.073" LastActivityDate="2021-08-11T19:42:47.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28246" PostTypeId="2" ParentId="28243" CreationDate="2021-07-31T10:59:55.887" Score="1" Body="&lt;p&gt;Open a Terminal and run the following commands one at a time:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm /var/lib/apt/lists/* -vf&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2021-07-31T10:59:55.887" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28247" PostTypeId="1" CreationDate="2021-07-31T12:24:10.493" Score="0" ViewCount="83" Body="&lt;p&gt;To start, I am an absolute beginner in Linux. I'll try to be as detailed as possible. Any help would be greatly appreciated!&lt;/p&gt;&#xA;&lt;p&gt;I have a MacBook Pro 2010 13&amp;quot; with an SSD and an HDD. I have installed Elementary OS Hera 5.1. on a seperate partition on the HDD (not wanting to risk my boot-SSD of merely trying out Linux) from an installation USB. The installation works fine, I think, seeing that the first boot out of the installation is no problem. The first thing I did was install updates and drivers to get regular things working, like Wifi for example. I also noticed that it didn't recognise my external monitor at all, which it did during the installation.&lt;/p&gt;&#xA;&lt;p&gt;After that, I closed the lid of the MacBook, and when I opened it again, the screen stayed black. I did a force-reboot with the power button on the MacBook and from then it never booted again. During boot I see the ElementaryOS logo for a bit before the screen turns off completely, with a flash. I'd like to point out that it isn't just an empty screen that I'm seeing, the screen is actually off. The hard drive is spinning, as if it is doing something, but even after hours of waiting, nothing is happening.&lt;/p&gt;&#xA;&lt;p&gt;I tried researching and tried several solutions, like going into Grub and trying the various advanced boot options, I tried 'nomodeset', I tried formatting and reinstalling, all to no avail.&lt;/p&gt;&#xA;&lt;p&gt;I would love to try out Elementary to see if I would want to take the step to Linux to give my MacBook a new life, so if anyone has any idea what is happening or what I can try, I would love to hear it!&lt;/p&gt;&#xA;" OwnerUserId="26466" LastActivityDate="2023-12-25T16:04:10.483" Title="Screen turns off during boot" Tags="|boot|dual-boot|black-screen|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28249" PostTypeId="2" ParentId="28247" CreationDate="2021-07-31T13:39:39.800" Score="0" Body="&lt;p&gt;I am not sure that the bootloader is pointing to Elemntary OS because you have installed both OS on different hard drivers. You said that you have booted once and now it does not boot at all which is kind of odd to me and i do not know why. but i advice you to install any OS in general on the SSD and keep them on the same drive, this will make things much faster and reliable.&lt;/p&gt;&#xA;&lt;p&gt;to better debug the issue, can you try pressing &lt;kbd&gt;&#xA;ctrl&lt;/kbd&gt;+&lt;kbd&gt;alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt;, it will give you a black screen (terminal), if it does give you that window, then your issue will be the display only.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-07-31T13:39:39.800" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28251" PostTypeId="2" ParentId="28236" CreationDate="2021-07-31T13:45:16.853" Score="0" Body="&lt;p&gt;If you do not have a dual OS installed, then just go with the Legacy, but if that is not the case, you are advised to partition your driver as GPT before installing any OS then install burn your OS as GPT &amp;amp; UEFI. try this and let me know.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-07-31T13:45:16.853" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28252" PostTypeId="2" ParentId="28231" CreationDate="2021-07-31T13:47:44.833" Score="0" Body="&lt;p&gt;Did you try &lt;code&gt;$ update-grub2&lt;/code&gt; or &lt;code&gt;$ update-initramfs -u&lt;/code&gt;?&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-07-31T13:47:44.833" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28253" PostTypeId="2" ParentId="28196" CreationDate="2021-07-31T13:49:47.053" Score="0" Body="&lt;p&gt;Are you on AC? if you are on DC, is your battery having some issues?&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-07-31T13:49:47.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28254" PostTypeId="1" CreationDate="2021-07-31T18:06:22.280" Score="0" ViewCount="58" Body="&lt;p&gt;If this isn't the appropriate forum for this question, I apologize. Please remove it if that's the case. I know that Elementary OS developers use Vala for their development and I'm unaware of a more appropriate forum where such a question can be asked of them... So, in Vala/Gtk3, I need to gain access to the serialized contents of a Gtk.TextBuffer (linked to a Gtk.TextView widget) including all of the Gtk.TextTags which have been applied to the text. This is so that I can translate each of the formatted (&lt;strong&gt;bolded&lt;/strong&gt;, &lt;em&gt;italicized&lt;/em&gt;, etc.) parts of the text to Pango markup which can then be inserted into another Widget. Can someone provide insight into how this is done? As you can see from the following linked post, I've attempted this using the Gtk.TextBuffer's register_serialize_tagset() and serialize() methods but unfortunately, this only results in obtaining an XML header that contains just one line of text: &amp;quot;GTKTEXTBUFFERCONTENTS-0001&amp;quot;. Is there some other means that Elementary OS Vala developers typically employ to gain access to a Gtk.TextBuffer's serialized text? How exactly does one go about saving the &amp;quot;rich text&amp;quot; contents of Gtk.TextView widget to a database (or even to an ordinary file) if this doesn't work?&lt;/p&gt;&#xA;&lt;p&gt;[https://stackoverflow.com/questions/68580733/how-do-i-obtain-the-complete-serialized-text-from-a-gtk-textview-in-vala]&lt;/p&gt;&#xA;" OwnerUserId="26468" LastActivityDate="2024-01-04T02:05:50.717" Title="How to gain access to the serialized contents of a Gtk.TextBuffer including all Gtk.TextTags?" Tags="|vala|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28255" PostTypeId="2" ParentId="28254" CreationDate="2021-08-02T02:19:35.250" Score="0" Body="&lt;p&gt;I found the solution. It looks like in order to use the array returned by serialize, you have to treat it as though it begins at character 31. That gets you beyond the first line and into the sought-after data. Thus, the corrected version of my original code is this...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Gtk.TextIter start_iter;&#xA;Gtk.TextIter end_iter;&#xA;textview.buffer.get_start_iter(out start_iter);&#xA;textview.buffer.get_end_iter(out end_iter);&#xA;var format = textview.buffer.register_serialize_tagset(&amp;quot;my-tagset&amp;quot;);&#xA;var data = textview.buffer.serialize(textview.buffer, format, start_iter, end_iter);&#xA;var sub_arr = data[31:];&#xA;print((string) sub_arr + &amp;quot;\n&amp;quot;);&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And yes, I'm treating the XML header as being of constant width here. Though I suspect this is workable, time may prove otherwise.&lt;/p&gt;&#xA;" OwnerUserId="26468" LastActivityDate="2021-08-02T02:19:35.250" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28256" PostTypeId="1" AcceptedAnswerId="28259" CreationDate="2021-08-02T14:32:17.973" Score="0" ViewCount="65" Body="&lt;p&gt;As per title, please.&lt;/p&gt;&#xA;&lt;p&gt;I have installed thunderbird as my email client.&lt;/p&gt;&#xA;&lt;p&gt;I keep my local email files on NAS&lt;/p&gt;&#xA;&lt;p&gt;All works fine apart from address book.&lt;/p&gt;&#xA;&lt;p&gt;Normally it is a case of replacing local abook.mab file with a link to the one kept on NAS...&lt;/p&gt;&#xA;&lt;p&gt;but struggling to do it on my elementary OS 5.1.7 Hera machine.&lt;/p&gt;&#xA;&lt;p&gt;For a starters, I would expect to see my tunderbird profile in .thunderbird in my /home/user folder, but can't see it there...?&lt;/p&gt;&#xA;&lt;p&gt;any help gratefully received, please&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;later edit:&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;just realised it is installed as flatpak (something new to me)&lt;/p&gt;&#xA;&lt;p&gt;so it is actually located at:&lt;/p&gt;&#xA;&lt;p&gt;/home/user/.local/share/flatpak/app/org.mozilla.Thunderbird&lt;/p&gt;&#xA;&lt;p&gt;so... where is the profile?&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;later edit #2&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;found the profiles here:&lt;/p&gt;&#xA;&lt;p&gt;/home/user/.var/app/org.mozilla.Thunderbird&lt;/p&gt;&#xA;&lt;p&gt;so now just need to create a link...&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;later edit #3&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;it should be easy, but for some reason it doesn't work with Thunderbird :-(&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;later edit #4&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have removed symlink I have created and replaced it with a copy of abook.mab and now the address book appears fine in Thunderbird,&lt;/p&gt;&#xA;&lt;p&gt;so it confirms to me that the problem is with symlink I have created...&lt;/p&gt;&#xA;&lt;p&gt;I have used the usual command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ln -s &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have no clue what is the problem...?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-08-02T19:19:22.513" LastActivityDate="2021-08-03T17:22:32.907" Title="thunderbird address book - link to abook.mab kept on NAS" Tags="|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28257" PostTypeId="1" CreationDate="2021-08-03T05:01:58.500" Score="0" ViewCount="135" Body="&lt;p&gt;6.0-rc1 was just released. I couldn't find the iso there, only 2 assets (2 files in archive formats). How to create an ISO (if that's the assets are for)?&lt;/p&gt;&#xA;" OwnerUserId="26484" LastActivityDate="2022-01-04T02:03:05.253" Title="How to get the new ISO (from source code?)?" Tags="|system-installation|updates|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28258" PostTypeId="2" ParentId="28200" CreationDate="2021-08-03T11:26:14.230" Score="0" Body="&lt;p&gt;You can minimize windows with the keyboard shortcut &lt;code&gt;Super+H&lt;/code&gt; (Super is typically your Windows key).&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, you can click the dock icon to minimize a focused window.&lt;/p&gt;&#xA;" OwnerUserId="29" LastEditorUserId="29" LastEditDate="2021-08-09T09:15:16.690" LastActivityDate="2021-08-09T09:15:16.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28259" PostTypeId="2" ParentId="28256" CreationDate="2021-08-03T17:22:32.907" Score="0" Body="&lt;p&gt;Sounds like it is Thunderbird problem :-(&lt;/p&gt;&#xA;&lt;p&gt;It worked in the past using symlinks, but apparently since V78 of Thunderbird things have changed...&lt;/p&gt;&#xA;&lt;p&gt;Whilst not solved, it can be closed, since it is not elementary or linux problem.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-08-03T17:22:32.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28260" PostTypeId="1" CreationDate="2021-08-04T17:08:00.363" Score="0" ViewCount="128" Body="&lt;p&gt;Just installed Elementary OS on my &lt;strong&gt;Macbook pro (2010)&lt;/strong&gt; with the battery on full charge. I boot up elementary and suddenly I'm told it's on &lt;strong&gt;7%&lt;/strong&gt;. Granted, my battery is horrendously weak &lt;strong&gt;(1hr to reach 0% on macOS)&lt;/strong&gt;, but the charger is always connected and indicating that the battery is at &lt;strong&gt;100%&lt;/strong&gt;. When I remove the charger though it legitimately seems like the battery is &lt;strong&gt;7%&lt;/strong&gt; since it decreases every &lt;strong&gt;3 mins (as seen on MacOS)&lt;/strong&gt;, and once it reached zero it requested that I &lt;strong&gt;remove the installation device and press enter&lt;/strong&gt; &lt;strong&gt;(consequently shutting off the mac)&lt;/strong&gt;. Without plugging in the charger I boot the device &lt;strong&gt;(this time to macOS)&lt;/strong&gt; and it tells me the battery is at &lt;strong&gt;33%&lt;/strong&gt;??? Multiple google searches got me nowhere. Anyone has any idea what's wrong?&lt;/p&gt;&#xA;" OwnerUserId="26494" LastActivityDate="2023-12-23T12:09:16.117" Title="Elementary OS claiming my battery is seven percent yet mag-safe charger says it's full" Tags="|macbook|battery|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28261" PostTypeId="2" ParentId="28239" CreationDate="2021-08-04T22:05:29.967" Score="0" Body="&lt;p&gt;I liked the look of Elementary but had the same problem - no wifi. I'm also on an ideapad. There is a further difficulty in that Elementary does not recognize my phone for tethering to the net for downloading drivers so I doubt that it will accept a Wi-Fi dongle/adapter, and don't want to waste even 10$. I may be wrong of course, but what it does mean is I won't be installing until this is addressed. Of note; Ideapads will accept most Linux distros but they have obstacles around loading some, and frequently wifi drivers are a problem. I'm currently using Zorin, and it does accept tethering as a way to download the Wifi driver.&lt;/p&gt;&#xA;" OwnerUserId="26501" LastActivityDate="2021-08-04T22:05:29.967" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28262" PostTypeId="2" ParentId="28260" CreationDate="2021-08-05T04:32:56.187" Score="0" Body="&lt;p&gt;There isn't anything &amp;quot;wrong&amp;quot;, per se. This is just a matter of elementary OS using different math from Apple. Let's look at how these two OSes can show different numbers for the same hardware.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;sub&gt;&lt;strong&gt;Note:&lt;/strong&gt; As I'm not sure whether you're using a 13&amp;quot; or 15&amp;quot; MacBook Pro, I'll use the battery specifications for the 15&amp;quot; model from 2010.&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;First, let's take a look at what sort of statistics your battery has to offer with &lt;code&gt;upower&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;upower -i `upower -e | grep 'BAT'`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will give you something like the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;native-path:          BAT0&#xA;  vendor:               SMP&#xA;  model:                45N1149&#xA;  serial:               3126&#xA;  power supply:         yes&#xA;  updated:              Thu Aug  5 04:14:40 2021 (106 seconds ago)&#xA;  has history:          yes&#xA;  has statistics:       yes&#xA;  battery&#xA;    present:             yes&#xA;    rechargeable:        yes&#xA;    state:               fully-charged&#xA;    warning-level:       none&#xA;    energy:              43.93 Wh&#xA;    energy-empty:        0 Wh&#xA;    energy-full:         43.96 Wh&#xA;    energy-full-design:  56.16 Wh&#xA;    energy-rate:         38.691 W&#xA;    voltage:             12.197 V&#xA;    percentage:          99%&#xA;    capacity:            78.2764%&#xA;    technology:          lithium-ion&#xA;    icon-name:          'battery-full-charged-symbolic'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sub&gt;&lt;strong&gt;Note:&lt;/strong&gt; This battery output is from a Lenovo Thinkpad W541. Yours may look different.&lt;/sub&gt;&lt;/p&gt;&#xA;&lt;p&gt;When macOS is determining your battery life, it looks at the &lt;code&gt;energy&lt;/code&gt; and &lt;code&gt;energy-full&lt;/code&gt; values to determine how much life remains, while elementary OS (and many other Linux derivatives) look at &lt;code&gt;energy&lt;/code&gt; and &lt;code&gt;energy-full-design&lt;/code&gt;. With this in mind, let's do some math.&lt;/p&gt;&#xA;&lt;p&gt;A 2010-era 15&amp;quot; MacBook Pro notebook usually ships from the factory with a 63.5Wh battery. 7% of that would be about 4.45Wh.&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt;OS&lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt;Calculation&lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt; &lt;/th&gt;&#xA;&lt;th&gt;Value&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;MacOS&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;&lt;code&gt;energy&lt;/code&gt; / &lt;code&gt;energy-full&lt;/code&gt;&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;4.45 / 4.45&lt;/td&gt;&#xA;&lt;td&gt;100%&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;elementary OS&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;&lt;code&gt;energy&lt;/code&gt; / &lt;code&gt;energy-full-design&lt;/code&gt;&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;4.45 / 63.5&lt;/td&gt;&#xA;&lt;td&gt;7%&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;For many Debian-based Linux distributions, the &amp;quot;critical battery shutdown&amp;quot; takes place at 2%. That works out to about 1.27Wh.&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt;OS&lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt;Calculation&lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt; &lt;/th&gt;&#xA;&lt;th&gt;Value&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;MacOS&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;&lt;code&gt;energy&lt;/code&gt; / &lt;code&gt;energy-full&lt;/code&gt;&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;1.27 / 4.45&lt;/td&gt;&#xA;&lt;td&gt;28.539%&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;elementary OS&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;&lt;code&gt;energy&lt;/code&gt; / &lt;code&gt;energy-full-design&lt;/code&gt;&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;1.27 / 63.5&lt;/td&gt;&#xA;&lt;td&gt;2%&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;If we take into account the energy rebound that takes place after a battery stops discharging momentarily (as well as Apple's propensity to use round, &amp;quot;people friendly&amp;quot; numbers whenever possible), we can consider the 33% value that macOS reports as a rounding error.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-05T04:32:56.187" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28263" PostTypeId="1" CreationDate="2021-08-05T07:12:40.017" Score="1" ViewCount="31" Body="&lt;p&gt;a few updates back the welcome screen was updated but after this the welcome screen no longer appears (which is great as I found it annoying).&#xA;So I also performed a fresh install on another pc and the welcome screen was working but the most recent update broke it on that pc too.&#xA;Just raising as an issue for the devs, I am sure other people have had this too&lt;/p&gt;&#xA;" OwnerUserId="26347" LastActivityDate="2021-08-05T07:12:40.017" Title="Welcome screen no longer appears after a recent update" Tags="|greeter|desktop|" AnswerCount="0" CommentCount="3" ClosedDate="2021-08-06T19:53:55.810" ContentLicense="CC BY-SA 4.0" />
  <row Id="28264" PostTypeId="2" ParentId="28119" CreationDate="2021-08-05T21:19:29.083" Score="1" Body="&lt;p&gt;Try pressing Super+Space (Or Win+Space) to force it back, worked for me.&lt;/p&gt;&#xA;&lt;p&gt;Keep pressing it if it doesn't stick, because it will eventually.&lt;/p&gt;&#xA;" OwnerUserId="26504" LastActivityDate="2021-08-05T21:19:29.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28266" PostTypeId="1" CreationDate="2021-08-06T08:55:47.693" Score="1" ViewCount="28" Body="&lt;p&gt;Thanks for this support forum...&lt;/p&gt;&#xA;&lt;p&gt;Recently I install Elementary OS for my laptop, and I make dual boot with Windows 10 but strange happen... Every time I turn it on before the login screen elementary OS always suspend so I have to press power again to make the login screen appear. It's annoying for me because of that. Can anyone help me about this problem.&lt;/p&gt;&#xA;" OwnerUserId="26506" LastActivityDate="2021-08-06T08:55:47.693" Title="Suspend after Boot" Tags="|elementary-website|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28268" PostTypeId="2" ParentId="28257" CreationDate="2021-08-06T19:53:34.443" Score="1" Body="&lt;p&gt;ISO's are available pre-built by sponsoring elementary on GitHub and can be downloaded at &lt;a href=&quot;https://builds.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://builds.elementary.io/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;If you wish to build you own ISO, the instructions are avilable in the repository wiki at &lt;a href=&quot;https://github.com/elementary/os/wiki/Building-ISO-Images&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/wiki/Building-ISO-Images&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2021-08-06T19:53:34.443" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28269" PostTypeId="2" ParentId="6702" CreationDate="2021-08-06T19:55:56.467" Score="0" Body="&lt;p&gt;I encountered the same issue with the error being logged as:&lt;br /&gt;&#xA;&lt;code&gt;RPC greeting failed: Host software version may not be compatible with the upgrader&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I found that VMware now only makes updates to &lt;code&gt;open-vm-tools open-vm-tools-desktop&lt;/code&gt; and that the tools bundled with VMware Fusion or VMware Workstation are legacy products.&lt;/p&gt;&#xA;&lt;p&gt;That said, this is how to install them.&lt;/p&gt;&#xA;&lt;p&gt;This will be similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/6711/26&quot;&gt;pdunker's answer&lt;/a&gt; but more command oriented.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Mount the drive: Open &lt;strong&gt;Files&lt;/strong&gt; and click the CD icon with the label &lt;strong&gt;VMware Tools&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Right click in any empty space and select &lt;strong&gt;Open In &amp;gt; Terminal&lt;/strong&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Run the following code:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;cp VMwareTools-*.tar.gz ~/&#xA;cd&#xA;tar -xzf VMwareTools-*.tar.gz&#xA;# this will uncompress to vmware-tools-distrib&#xA;cd vmware-tools-distrib&#xA;sudo ./vmware-install.pl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;4&quot;&gt;&#xA;&lt;li&gt;Follow the interacetive shell to make choices and your install should complete normally.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26" LastEditorUserId="26" LastEditDate="2021-08-06T20:07:58.050" LastActivityDate="2021-08-06T20:07:58.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28270" PostTypeId="1" CreationDate="2021-08-06T21:46:56.787" Score="0" ViewCount="39" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZOZuE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZOZuE.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;I wanted to install spotify and it's not in the application center so I found i can do it via snapcraft and I tried to install it by following this steps ( &lt;a href=&quot;https://snapcraft.io/docs/installing-snap-on-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/docs/installing-snap-on-elementary-os&lt;/a&gt;) but then i got this error. And i don't know what to do. I want to have spotify&lt;/p&gt;&#xA;" OwnerUserId="26511" LastActivityDate="2023-12-26T22:04:30.523" Title="Downloading snapcraft error" Tags="|camera|spotify|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28271" PostTypeId="2" ParentId="28219" CreationDate="2021-08-06T22:20:49.007" Score="0" Body="&lt;p&gt;Same exact problem but with main external screen. I have a ZOTAC GeForce GTX 1060 3GB, intel i3-8100, 16GB RAM. Worked like a charm in live mode, but with nvidia drivers installed now is in this crooked resolution on a full 1080p screen.&lt;/p&gt;&#xA;" OwnerUserId="26512" LastActivityDate="2021-08-06T22:20:49.007" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28272" PostTypeId="1" AcceptedAnswerId="28280" CreationDate="2021-08-07T01:44:14.873" Score="0" ViewCount="125" Body="&lt;p&gt;I'm the only admin/user on my laptop, so I don't know why this is an issue.&lt;/p&gt;&#xA;&lt;p&gt;I right-clicked on the files, and under &amp;quot;permissions&amp;quot; it shows that I'm the owner and there are options that can be toggled.  I gave myself (cytosage) the ability to Read, Write, and Execute, but it didn't help.&lt;/p&gt;&#xA;&lt;p&gt;[&lt;img src=&quot;https://i.stack.imgur.com/Z4dir.png&quot; alt=&quot;enter image description here&quot; /&gt;][1&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/aLUQr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/aLUQr.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25591" LastActivityDate="2021-09-06T19:02:30.230" Title="Why don't I have &quot;permission&quot; to delete files off my USB bootable drive?" Tags="|release-hera|pantheon-files|files|usb|permissions|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28273" PostTypeId="1" CreationDate="2021-08-07T08:23:31.357" Score="0" ViewCount="279" Body="&lt;p&gt;I use ubuntu repository for installing docker in elementory OS 6.&#xA;I think what it's would be use &lt;strong&gt;focal&lt;/strong&gt;/ registry, but it return error - &lt;code&gt;E: The repository 'https://download.docker.com/linux/ubuntu odin Release' does not have a Release file.&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;How can I change it to &lt;strong&gt;focal&lt;/strong&gt;?&lt;/p&gt;&#xA;" OwnerUserId="26516" LastActivityDate="2022-01-04T09:03:45.333" Title="Install docker and docker compose" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28274" PostTypeId="2" ParentId="28273" CreationDate="2021-08-07T08:46:52.463" Score="1" Body="&lt;p&gt;Go to &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; and change docker.list from &lt;code&gt;deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu   odin stable&lt;/code&gt; to &lt;code&gt;deb [arch=amd64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu   focal stable&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26516" LastActivityDate="2021-08-07T08:46:52.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28275" PostTypeId="2" ParentId="28247" CreationDate="2021-08-07T09:54:57.423" Score="0" Body="&lt;p&gt;@Omar Shawky&lt;/p&gt;&#xA;&lt;p&gt;So, here's my update:&lt;/p&gt;&#xA;&lt;p&gt;By now, I've installed eOS on my SSD, which makes everything faster, but now more functional in the black screen problem.&#xA;I have by now figured out that it has to do with the Nvidia-340 driver. Everything works until I install that. I have no clue if I need it, or can simply use eOS without this driver. I have the 'nouveau' driver active now, which seems ok?&lt;/p&gt;&#xA;&lt;p&gt;Every time I do a new install, which I have done a lot of times now, there seems to be a new problem. Updates won't install, or it hangs, or it is very sluggish... Particularly the last thing bugs me, because I was hoping that using Linux would breathe some new life in my old MacBook.&#xA;Is it always this problematic, or is this just me..?&lt;/p&gt;&#xA;" OwnerUserId="26517" LastActivityDate="2021-08-07T09:54:57.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28276" PostTypeId="1" CreationDate="2021-08-07T13:22:29.120" Score="1" ViewCount="38" Body="&lt;p&gt;Is stable release candidate (early access) just stable ?&#xA;If not then after official release will I be able to update ?&lt;/p&gt;&#xA;&lt;p&gt;I really want to start using it as my daily but idk if it's the full version&lt;/p&gt;&#xA;" OwnerUserId="26519" LastActivityDate="2021-08-07T16:47:26.437" Title="is stable rc same as stable?" Tags="|release-odin|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28277" PostTypeId="1" CreationDate="2021-08-07T16:05:44.123" Score="1" ViewCount="114" Body="&lt;p&gt;After installing elementary OS, I have noticed that whenever the laptop goes into sleep it freezes. Also while trying to click the suspend button, the system just freezes. Please help on the issue as every time I will have to force turn off the system.&lt;/p&gt;&#xA;&lt;p&gt;Update: 08/11:&#xA;Laptop Lenovo Z51- 70&#xA;i7 5th Gen, 16gn RAM, 1TB HDD, 128 GB SSD, Graphics Radeon R9 M375.&lt;/p&gt;&#xA;" OwnerUserId="26520" LastEditorUserId="26520" LastEditDate="2021-08-11T16:30:04.477" LastActivityDate="2021-08-11T16:30:04.477" Title="Suspend &amp; sleep freeze issue" Tags="|suspend|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28280" PostTypeId="2" ParentId="28272" CreationDate="2021-08-07T17:42:58.983" Score="1" Body="&lt;p&gt;It may be that you do not have the permission to delete some files within that folder.  The permission applied to the folder itself does not automatically get replicated to all its children. You need to open a terminal and use the command line for that (use the command &lt;code&gt;man chmod&lt;/code&gt; to see further information if you need to).  Alternatively you can try opening Files in administrator mode.  Right click on the dock Files icon (or in the Applications menu if it is not pinned in the dock) and choose &amp;quot;Open New Window as Administrator&amp;quot;. You will need to enter your administrator password. You can then delete any file but will not be able to recover it if you make a mistake. In either case be careful to change/delete only files that can be safely removed. It is easy to break things in this mode.&lt;/p&gt;&#xA;&lt;p&gt;Note that if you mess with a bootable drive you will not be able to boot from it again. If you want to turn it into an &amp;quot;ordinary&amp;quot; USB drive then it may be easier to reformat it using e.g. gparted.  Be sure you reformat the correct drive!&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-08-07T17:42:58.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28284" PostTypeId="2" ParentId="28200" CreationDate="2021-08-08T15:13:25.520" Score="0" Body="&lt;p&gt;As Vitor mentioned, you can install Elementary Tweaks (by  his method.)  When viewed under system settings there is an option to have either Windows or Mac style Window Controls, as well as various Linux flavors. (System Settings:Tweaks:Appearance:Window Controls:Layout)&lt;/p&gt;&#xA;&lt;p&gt;This is system wide, however some programs will override it.  For instance I use Brave for a web browser, and it uses its own theme including Window Controls.&lt;/p&gt;&#xA;" OwnerUserId="10384" LastActivityDate="2021-08-08T15:13:25.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28285" PostTypeId="2" ParentId="28270" CreationDate="2021-08-08T15:59:30.670" Score="0" Body="&lt;p&gt;The solution is to read the error message: Are you root?. Use sudo to run a command with root privileges.&lt;/p&gt;&#xA;&lt;p&gt;like so: &lt;code&gt;sudo apt --fix-broken install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2021-08-08T15:59:30.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28286" PostTypeId="1" AcceptedAnswerId="28288" CreationDate="2021-08-08T16:30:44.503" Score="1" ViewCount="388" Body="&lt;p&gt;Any advice/recommendations, please&lt;/p&gt;&#xA;&lt;p&gt;as to the best way of running DOS/Windows executable files in elementary OS?&lt;/p&gt;&#xA;&lt;p&gt;I could switch to Windows just for this simulation program:&lt;/p&gt;&#xA;&lt;p&gt;(&lt;a href=&quot;http://www.jf2.com/bcwrr/Dockstader-Valve-Gear.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://www.jf2.com/bcwrr/Dockstader-Valve-Gear.html&lt;/a&gt;),&lt;/p&gt;&#xA;&lt;p&gt;but it would be PITA doing it just for that&lt;/p&gt;&#xA;&lt;p&gt;(since I already migrated almost everything else to Linux...)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Compiled from comments / discussion:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Have tried it today (Aug 11 2021 at 8:48) and:&lt;/p&gt;&#xA;&lt;p&gt;it seems that input window hiding behind main one is probably just coincidence?, but... there was another/additional window hiding quietly behind main one when things froze&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vs5hq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vs5hq.jpg&quot; alt=&quot;error message&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Deleting this window allowed me to close the program and start again.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;had another go at editing dimensions, making sure that the input windows was away from main one.&lt;/p&gt;&#xA;&lt;p&gt;All was going well, until :-)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0vu9M.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0vu9M.jpg&quot; alt=&quot;error messages&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The only way out of this one was to shutdown elementary and start again...&lt;/p&gt;&#xA;&lt;p&gt;After repeated attempts it all seems to be coming back to &lt;strong&gt;user32.dll&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;one more EDIT:&lt;/strong&gt;&#xA;if I execute any of these simulation programs from terminal, I get the following error message (although it deosn't stop things running?):&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;wine SlipEccen.exe&lt;/p&gt;&#xA;&lt;p&gt;006c:err:vulkan:wine_vk_init Failed to load libvulkan.so.1.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;And finally (Aug 11 2021 at 9:43)...&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;It seems the answer is as simple as disabling error message in the simulation program&#xA;(go: SetUp &amp;gt; SetErrorBeep Off).&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This allows me to enter new dimensions without things going weird.&lt;/p&gt;&#xA;&lt;p&gt;I have positively confirmed it by switching it on (things go wrong) and switching it off (works OK).&lt;/p&gt;&#xA;&lt;p&gt;I don't need to be warned about dimension's error (I know it will be wrong until I complete entering the data) so disabling error message is not a big deal.&lt;/p&gt;&#xA;&lt;p&gt;Whether it could be made to work by doing something about user32.dll is another story...&lt;/p&gt;&#xA;&lt;p&gt;but I am happy with the compromise solution.&lt;/p&gt;&#xA;&lt;p&gt;@Vlad - big thank you for your help!!&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="9445" LastEditDate="2022-02-09T05:48:47.190" LastActivityDate="2022-02-26T08:19:03.573" Title="running DOS/Windows executable in elementary OS?" Tags="|wine|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28288" PostTypeId="2" ParentId="28286" CreationDate="2021-08-08T19:39:52.590" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://www.winehq.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;WINE&lt;/strong&gt;&lt;/a&gt; is always the thing i go to when I really need to run some Windows apps on elementary. In your specific case, Dockstader executables seem to run just fine with WINE.&lt;/p&gt;&#xA;&lt;h2&gt;&lt;a href=&quot;https://i.stack.imgur.com/Flqfd.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Flqfd.gif&quot; alt=&quot;Heading&quot; /&gt;&lt;/a&gt;&lt;/h2&gt;&#xA;&lt;p&gt;I have a detailed answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/25260/i-cannot-install-wine/25262#25262&quot;&gt;here &lt;/a&gt; about how to install WINE on elementary OS Hera 5.1&amp;gt; See if that gets you what you need, and let us know if you get into any issues.&lt;/p&gt;&#xA;&lt;p&gt;EDIT: &lt;a href=&quot;https://www.dosbox.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;DosBox&lt;/strong&gt;&lt;/a&gt; works well for non-win32 applications, you can try it. Easy to install with a simple &lt;code&gt;sudo apt install dropbox&lt;/code&gt;. Use &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Enter&lt;/kbd&gt; to make the DosBox window go Full screen.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/womvB.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/womvB.gif&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2021-08-08T20:26:20.313" LastActivityDate="2021-08-08T20:26:20.313" CommentCount="12" ContentLicense="CC BY-SA 4.0" />
  <row Id="28289" PostTypeId="1" CreationDate="2021-08-08T20:35:46.200" Score="1" ViewCount="272" Body="&lt;p&gt;So in the early access rc for eOS6, in the app center there are two drop-down choices to download apps, app center vs. app center system-wise. Can someone explain to me what do these mean?&lt;/p&gt;&#xA;" OwnerUserId="26526" LastActivityDate="2021-08-09T05:15:41.350" Title="App center vs. App center system-wise" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28290" PostTypeId="2" ParentId="28289" CreationDate="2021-08-09T05:15:41.350" Score="1" Body="&lt;p&gt;&lt;code&gt;System-wide&lt;/code&gt; means that the installed app will be available for all users as opposed to &lt;code&gt;user&lt;/code&gt; which would make an application available only to the current user.&lt;/p&gt;&#xA;" OwnerUserId="26337" LastActivityDate="2021-08-09T05:15:41.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28291" PostTypeId="2" ParentId="19375" CreationDate="2021-08-09T09:56:17.617" Score="1" Body="&lt;p&gt;For Gmail, you might have to get an &amp;quot;App Password&amp;quot;. You can get this by going to&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;Manage your Google account&amp;quot; &amp;gt; &amp;quot;Security&amp;quot; &amp;gt; &amp;quot;Signing in to Google&amp;quot; &amp;gt; &amp;quot;App Password&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Finally, use the password they provide to login to your account instead of you regular password.&lt;/p&gt;&#xA;" OwnerUserId="26526" LastActivityDate="2021-08-09T09:56:17.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28292" PostTypeId="1" CreationDate="2021-08-10T08:31:29.000" Score="0" ViewCount="49" Body="&lt;p&gt;i worked on elementary os hera for a year on old asus laptop- and now i`ve got a new laptop zenbook ux425e.&#xA;i downloaded a latest version, installed and updated elementary os  (from app panel and from apt-get)- and there is no video and sound drivers, no sound device and low screen resolution.&#xA;googled something about kernel outdate and intel oem inside ubuntu kernel and etc.&lt;/p&gt;&#xA;&lt;p&gt;so what should i do?&lt;/p&gt;&#xA;" OwnerUserId="26534" LastActivityDate="2021-08-10T08:31:29.000" Title="zenbook ux425e problem with drivers" Tags="|release-hera|sound|kernel|resolution|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28293" PostTypeId="2" ParentId="26545" CreationDate="2021-08-10T16:04:47.820" Score="0" Body="&lt;p&gt;Genuinely, avoid ElementaryOS if you need RDP - it's not compatible &amp;quot;out of the box&amp;quot; with anything that I have found except x11vnc (that's what I'm using and I'm connecting to a dell 1950)&lt;/p&gt;&#xA;&lt;p&gt;The issue seems to be Pantheon itself.&lt;/p&gt;&#xA;&lt;p&gt;If you do want to go down the x11vnc route, this is what I did on 5.1&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://tecadmin.net/setup-x11vnc-server-on-ubuntu-linuxmint/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://tecadmin.net/setup-x11vnc-server-on-ubuntu-linuxmint/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26461" LastActivityDate="2021-08-10T16:04:47.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28295" PostTypeId="1" AcceptedAnswerId="28301" CreationDate="2021-08-10T17:34:09.590" Score="2" ViewCount="1703" Body="&lt;p&gt;i'm trying to install Elementary OS 6, and the Live USB refuses to boot. Everything is normal, i downloaded the image and flashed it with Balena Etcher, and then, after trying to boot it, it gives this error : &lt;a href=&quot;https://i.stack.imgur.com/kacZC.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kacZC.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is kinda unusual since Eos 5.1 booted normally without problems&#xA;( Oh, and also, Here are my specs : )&#xA;CPU: Intel i3-6006U (4) @ 2.000GHz&#xA;GPU: Intel HD Graphics 520&#xA;Memory: 4GB&#xA;Host: Inspiron 15-3567&lt;/p&gt;&#xA;" OwnerUserId="25686" LastActivityDate="2021-08-11T11:41:21.077" Title="Elementary OS 6 Live USB don't boot" Tags="|boot|error|" AnswerCount="4" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28297" PostTypeId="1" AcceptedAnswerId="28304" CreationDate="2021-08-10T17:58:50.473" Score="10" ViewCount="12393" Body="&lt;p&gt;I want to use elementary OS 6 but I am using elementary OS 5 in my VM on Windows.&#xA;What terminal commands do I need to type?&lt;/p&gt;&#xA;" OwnerUserId="26409" LastEditorUserId="8517" LastEditDate="2021-08-11T12:19:31.887" LastActivityDate="2022-02-05T12:20:31.723" Title="How to upgrade from elementary OS 5 to 6?" Tags="|updates|" AnswerCount="3" CommentCount="3" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28298" PostTypeId="2" ParentId="28295" CreationDate="2021-08-10T18:11:15.797" Score="0" Body="&lt;p&gt;I am experiencing the same problem on a Dell Optiplex 2090 desktop. I think the provided disk image doesn't have proper support for UEFI and/or secure boot.&lt;/p&gt;&#xA;&lt;p&gt;To make it boot, I pressed F2 while the system was starting to enter BIOS settings. From there I enabled &amp;quot;Legacy boot&amp;quot; instead of UEFI.&lt;/p&gt;&#xA;&lt;p&gt;After that, I am able to boot into the installer. Please be aware that if you're dual-booting, changing this setting could prevent you from booting another OS.&lt;/p&gt;&#xA;" OwnerUserId="14000" LastActivityDate="2021-08-10T18:11:15.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28299" PostTypeId="1" CreationDate="2021-08-10T18:13:32.600" Score="0" ViewCount="737" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q6Wr3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q6Wr3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Elementary OS6 Stable Fresh install cannot install deb file and no Eddy on AppCenter, please help?&lt;/p&gt;&#xA;" OwnerUserId="26540" LastActivityDate="2021-08-10T18:44:15.887" Title="Elementary OS6 Stable Fresh install cannot install deb file and no Eddy on AppCenter" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28300" PostTypeId="2" ParentId="28299" CreationDate="2021-08-10T18:38:32.827" Score="-1" Body="&lt;p&gt;If you decide to stick to this latest eOS crap you can do this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Install &lt;code&gt;gdebi&lt;/code&gt; with &lt;code&gt;sudo apt install gdebi&lt;/code&gt; and it won't work out-of-the-box.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo nano /usr/share/applications/gdebi.desktop&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Change &lt;code&gt;Exec=gdebi-gtk %f&lt;/code&gt; to &lt;code&gt;Exec=sh -c &amp;quot;gdebi-gtk %f&amp;quot;&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Gdebi is far better than AppCenter or Eddy because it will tell you what dependencies are needed for the installation (like the all KDE environment just to get a simple app) and, more importantly, are there gonna be any packages removed as a result of installation which is something that eOS users have experienced.&lt;/p&gt;&#xA;" OwnerUserId="19143" LastEditorUserId="19143" LastEditDate="2021-08-10T18:44:15.887" LastActivityDate="2021-08-10T18:44:15.887" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28301" PostTypeId="2" ParentId="28295" CreationDate="2021-08-10T18:40:19.753" Score="3" Body="&lt;p&gt;I had the same error while being in legacy mode. My fix was to change the BIOS to read a different file than its default in the folder /efi/boot on the usb-stick. To do that I had to create a new boot option as depicted on the photo.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pQZz1.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pQZz1.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;My laptop a is a Dell Inspiron 3583.&lt;/p&gt;&#xA;" OwnerUserId="26541" LastActivityDate="2021-08-10T18:40:19.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28303" PostTypeId="1" CreationDate="2021-08-10T19:12:34.420" Score="0" ViewCount="34" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HngOe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HngOe.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;I get this error when booting from my Etcher formatted USB. The ISO checksum was correct.&lt;/p&gt;&#xA;" OwnerUserId="26544" LastActivityDate="2021-08-10T19:12:34.420" Title="Error booting into Odin: Intel Core i9 10900K, XFX Radeon RX6900XT, 64GB G.SKILL ram, Sabrent 1TB SSD, MSI MEG Z490 Godlike" Tags="|boot|error|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28304" PostTypeId="2" ParentId="28297" CreationDate="2021-08-10T19:40:31.987" Score="12" Body="&lt;p&gt;To my huge surprise, I learnt that the only way to move to a new version is to completely re-install the OS. This does not go well with the line &lt;strong&gt;&amp;quot;replacement for Windows and macOS&amp;quot;&lt;/strong&gt;, because on those two I don't have to completely wipe my environment on every major update.&lt;/p&gt;&#xA;" OwnerUserId="26266" LastActivityDate="2021-08-10T19:40:31.987" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28305" PostTypeId="2" ParentId="28189" CreationDate="2021-08-10T19:55:53.590" Score="0" Body="&lt;p&gt;I had the same issue, and enabling EFI on the system motherboard of the VM fixed it (as described here &lt;a href=&quot;https://elementaryos.stackexchange.com/a/28121/26547&quot;&gt;https://elementaryos.stackexchange.com/a/28121/26547&lt;/a&gt;)&lt;/p&gt;&#xA;" OwnerUserId="26547" LastActivityDate="2021-08-10T19:55:53.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28306" PostTypeId="2" ParentId="19300" CreationDate="2021-08-10T20:11:44.150" Score="1" Body="&lt;p&gt;For anyone stumbling across this (like me):&lt;/p&gt;&#xA;&lt;p&gt;In the coming Elementary OS 6.0 Odin this is fixed and the sidebar will stay as it is set. So if you want to have this feature for Elementary Code, you can just update Elementary OS as soon as Odin is available :)&lt;/p&gt;&#xA;&lt;p&gt;See here: &lt;a href=&quot;https://github.com/elementary/code/pull/842&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/code/pull/842&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26548" LastActivityDate="2021-08-10T20:11:44.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28307" PostTypeId="1" CreationDate="2021-08-10T20:41:22.237" Score="0" ViewCount="116" Body="&lt;p&gt;After doing a fresh install of Odin, whole disk, on a 2015 13” MacBook Pro the grub menu is showing 1 row of pixels of output.&lt;/p&gt;&#xA;&lt;p&gt;Seemingly, this error also prevented me from being able to use the Encrypted Disk functionality available during OS install, as I am now realizing the reason the system seemed to hang after reboot was that the prompt for the password was invisible due to this same error.&lt;/p&gt;&#xA;&lt;p&gt;However, I then reinstalled without encryption and am now facing this grub issue. Of course, if I wait the 10 seconds it will just boot normally but I cannot choose any grub settings.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/n8i5U.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/n8i5U.jpg&quot; alt=&quot;grub output showing 1 row of pixel&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried modifying the grub file like so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLEU=menu&#xA;GRB_TIMEOUT=10&#xA;GRUB_DISTRIBUTOR=`lsb_release -i -s 2&amp;gt; /dev/null || echo Debian`&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;earlyprintk=vga&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This didn't work so I tried:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_GFXMODE=640x480   &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And that didn't work so I tried:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_TERMINAL=console&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2023-12-29T02:08:06.017" Title="grub unusable output after fresh elementaryOS 6 install" Tags="|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28308" PostTypeId="1" CreationDate="2021-08-10T20:50:51.400" Score="2" ViewCount="629" Body="&lt;p&gt;So I grabbed Odin today, checked the checksum post download and used etcher to flash it on a usb drive. I booted from the flashdrive and eOS started in live mode, so far so good. I was able to click through the whole installation process without any issues. At the end it tells me to either shutdown or reboot and if I do nothing he counts down for a reboot. After that reboot I am being flashed 2 or 3 times for about 1 sec the following.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Failed to open \EFI\BOOT\{white rectangular char with a black questionmark in it} - Invalid Parameter&#xA;Failed to load image \EFI\BOOT\{white rectangular char with a black questionmark in it} - Invalid Parameter&#xA;start_image() returned Invalid Parameter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am using a Dell XPS 13 9380 from 2019. Any ideas on how to fix this or what the issue might be?&lt;/p&gt;&#xA;" OwnerUserId="26549" LastActivityDate="2021-09-01T13:35:53.067" Title="EOS6 Odin stable does not boot after installation" Tags="|system-installation|boot|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28309" PostTypeId="1" CreationDate="2021-08-10T20:54:32.767" Score="1" ViewCount="240" Body="&lt;p&gt;I just installed Odin on an older Windows 8 vintage Dell laptop.  I have totally forgotten how to troubleshoot the chipset and get the kernel sources installed correctly.   I’ve gotten as far as installing the BCMWL Kernel source package from AppCenter, but I am totally lost.&lt;/p&gt;&#xA;" OwnerUserId="6173" LastActivityDate="2021-08-12T04:31:09.980" Title="BCMWL WiFi not working for me. Can I get a reminder on how to get it working in Odin?" Tags="|wifi|elementary-project|release-odin|" AnswerCount="2" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28310" PostTypeId="2" ParentId="28186" CreationDate="2021-08-10T20:58:21.430" Score="2" Body="&lt;p&gt;It appears that contact syncing has &lt;em&gt;not&lt;/em&gt; been written into the current, stable version of &lt;code&gt;pantheon-mail&lt;/code&gt; for elementaryOS 6.0. I guess I'll be waiting for 7.0...&lt;/p&gt;&#xA;" OwnerUserId="26356" LastActivityDate="2021-08-10T20:58:21.430" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28312" PostTypeId="2" ParentId="28307" CreationDate="2021-08-10T21:13:46.923" Score="0" Body="&lt;p&gt;I resolved this by installing boot-repair and using it to disable Secure Boot, which also went ahead and reinstalled grub in the course of disabling that option. Now regular grub things/settings are working. Leaving this unanswered in case someone knows why this happened, as I still believe this is related to not being prompted for disk encryption password after installing elementaryOS with disk encryption.&lt;/p&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2021-08-10T21:13:46.923" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28313" PostTypeId="2" ParentId="14276" CreationDate="2021-08-10T21:14:10.520" Score="0" Body="&lt;p&gt;TL;DR&lt;/p&gt;&#xA;&lt;p&gt;Place icons in:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~/.local/share/icons/image.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/icons/image.png&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and use them with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;-i image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;--icon=image&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Do not add extension to image name in the command flag, just image name.&lt;/p&gt;&#xA;&lt;p&gt;example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;notify-send --icon=razer -a 'Razer Raiju TE (xboxdrv)' --urgency=normal --expire-time=2000 'Microsoft X-Box 360 pad' &amp;quot;Removed&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;notify-send -icon razer -a 'Razer Raiju TE (xboxdrv)' --urgency=normal --expire-time=2000 'Microsoft X-Box 360 pad' &amp;quot;Removed&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26551" LastActivityDate="2021-08-10T21:14:10.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28315" PostTypeId="2" ParentId="28309" CreationDate="2021-08-10T22:22:20.360" Score="2" Body="&lt;p&gt;Have been struggling with this, too. You need to install Kernel Headers first. See this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/issues/526#issue-965454894&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/526#issue-965454894&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;you might need to&#xA;sudo apt-get install --reinstall bcmwl-kernel-source&lt;/p&gt;&#xA;" OwnerUserId="26554" LastActivityDate="2021-08-10T22:22:20.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28316" PostTypeId="2" ParentId="28308" CreationDate="2021-08-11T00:18:59.607" Score="2" Body="&lt;p&gt;This is being tracked upstream here: &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/shim/+bug/1937115&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/shim/+bug/1937115&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It's affecting Dell users trying to install Linux from live images using a specific version of the shim/shim-signed packages (see the proposed bug fix at &lt;a href=&quot;https://github.com/rhboot/shim/pull/393&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/rhboot/shim/pull/393&lt;/a&gt;), and that includes elementary 6. We can only wait.&lt;/p&gt;&#xA;" OwnerUserId="26556" LastEditorUserId="26556" LastEditDate="2021-08-11T02:17:48.317" LastActivityDate="2021-08-11T02:17:48.317" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28318" PostTypeId="1" AcceptedAnswerId="28319" CreationDate="2021-08-11T01:13:54.210" Score="4" ViewCount="4379" Body="&lt;p&gt;I have a fingerprint sensor supported by libfprint. How can I use it to log in to Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="26557" LastActivityDate="2022-10-21T15:43:02.867" Title="How can I sign in with my fingerprint on Elementary OS 6 Odin?" Tags="|greeter|pantheon|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28319" PostTypeId="2" ParentId="28318" CreationDate="2021-08-11T01:13:54.210" Score="5" Body="&lt;p&gt;The Elementary OS greeter has support for fprintd via &lt;a href=&quot;https://en.wikipedia.org/wiki/Linux_PAM&quot; rel=&quot;noreferrer&quot;&gt;PAM&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;First, install the required packages:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libpam-fprintd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, start &lt;code&gt;fprintd&lt;/code&gt; if it's not yet started:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl start fprintd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, enroll a fingerprint:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;fprintd-enroll&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, enable the &lt;code&gt;fprintd&lt;/code&gt; PAM module:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo pam-auth-update --enable fprintd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;A fingerprint icon will now show up on the login screen, indicating that the sensor is active.&lt;/p&gt;&#xA;" OwnerUserId="26557" LastActivityDate="2021-08-11T01:13:54.210" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28322" PostTypeId="1" CreationDate="2021-08-11T02:51:37.363" Score="0" ViewCount="201" Body="&lt;p&gt;congratulations for launching the new version! Yesterday I tried to install on 2 notebooks and in both the installation presented problems, I attached photos of some errors. In both I have used elementary 5.1 and 5.8 and the test mode of 6.0 worked but still could not install&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1ww9I.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1ww9I.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XzQpe.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XzQpe.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26561" LastActivityDate="2024-01-03T03:11:11.390" Title="errors with elementary 6.0 installation" Tags="|release-odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28323" PostTypeId="2" ParentId="28308" CreationDate="2021-08-11T03:20:41.133" Score="0" Body="&lt;p&gt;You can go into the Dell BIOS (F2 in my case) and then under boot options you can manually add a UEFI entry to boot off BOOTx64.EFI which is in EFI/boot folder of the USB stick. That worked for me.&lt;/p&gt;&#xA;&lt;p&gt;Note: Beta 2 didn't have this issues, so it must have been that shim change as per the previous commentary.&lt;/p&gt;&#xA;" OwnerUserId="12559" LastActivityDate="2021-08-11T03:20:41.133" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28324" PostTypeId="2" ParentId="28308" CreationDate="2021-08-11T03:33:35.150" Score="2" Body="&lt;p&gt;elementary is tracking this here: &lt;a href=&quot;https://github.com/elementary/triage/issues/74&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And there's a workaround:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Downloading an Ubuntu 20.04.2 iso and copying the EFI folder from it to the elementary media (overwriting the original EFI files) seems to work as a workaround.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I will try this workaround myself, as I am also affected by this problem.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE&lt;/strong&gt;: A new image has been released with a correction for this problem. Get it at &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary.io&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26562" LastEditorUserId="26562" LastEditDate="2021-09-01T13:35:53.067" LastActivityDate="2021-09-01T13:35:53.067" CommentCount="10" ContentLicense="CC BY-SA 4.0" />
  <row Id="28325" PostTypeId="2" ParentId="28295" CreationDate="2021-08-11T03:46:00.863" Score="0" Body="&lt;p&gt;This is a known problem and is being tracked here: &lt;a href=&quot;https://github.com/elementary/triage/issues/74&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There's a workaround:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Downloading an Ubuntu 20.04.2 iso and copying the EFI folder from it to the elementary media (overwriting the original EFI files) seems to work as a workaround.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I have a Dell Inspiron 15 3583 and I am also affected by this.&lt;/p&gt;&#xA;" OwnerUserId="26562" LastActivityDate="2021-08-11T03:46:00.863" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28326" PostTypeId="1" AcceptedAnswerId="28371" CreationDate="2021-08-11T03:50:25.990" Score="1" ViewCount="429" Body="&lt;p&gt;In Beta 2 there was a ton of software available from AppCenter. For example Inkscape or Gimp. However in stable only those few curated apps are showing. How can I enable AppCenter to show the rest?&lt;/p&gt;&#xA;" OwnerUserId="26554" LastActivityDate="2021-08-11T16:30:03.623" Title="How to enable uncurated apps in AppCenter 6.0 Odin stable" Tags="|software-installation|appcenter|release-odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28327" PostTypeId="2" ParentId="28322" CreationDate="2021-08-11T05:42:30.167" Score="0" Body="&lt;p&gt;It cannot write to the volume because of some error with LVM. Go into the demo mode of the installer, open the terminal, and wipe the volume using the 'wipefs' command (sudo wipefs /dev/mapper/data_BLIn8 or whatever the original name/location of the volume is). For good measure, you might want to write a new filesystem (sudo mkfs -t ext4 -f /dev/mapper/data_BLIn8).&lt;/p&gt;&#xA;" OwnerUserId="26563" LastActivityDate="2021-08-11T05:42:30.167" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28328" PostTypeId="1" CreationDate="2021-08-11T06:04:07.283" Score="0" ViewCount="51" Body="&lt;p&gt;First I has problem with busybox,&lt;/p&gt;&#xA;&lt;p&gt;Today my Asus laptop (ultrabook ux21A asus) keep ask to log in at terminal. And I can not use my Hera as this far.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/D9Nbm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/D9Nbm.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;thanks advance for your help.&lt;/p&gt;&#xA;" OwnerUserId="26529" LastActivityDate="2021-08-11T06:04:07.283" Title="Busybox than black screen only. No" Tags="|settings|boot|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="28329" PostTypeId="1" AcceptedAnswerId="28365" CreationDate="2021-08-11T06:29:34.127" Score="1" ViewCount="2560" Body="&lt;p&gt;On my Thinkpad X230 using Intel integrated graphics with i915, I get a black screen on boot of elementaryOS 6 instead of plymouth. I can still enter my encryption password into the black screen and then I‘m greeted with the login manager shortly after.&lt;/p&gt;&#xA;&lt;p&gt;First, i realized that kernel modesetting was seemingly disabled:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# cat /sys/module/i915/parameters/modeset&#xA;-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I  managed to enable it with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;options i915 modeset=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;in &lt;code&gt;/etc/modprobe.d/i915.conf&lt;/code&gt; and a subsequent &lt;code&gt;update-initramfs -u&lt;/code&gt;. But plymouth still shows a black screen. I also added&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;i915 modeset=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to &lt;code&gt;/etc/initramfs-tools/modules&lt;/code&gt; and added &lt;code&gt;i915.modeset=1&lt;/code&gt; to my grub commandline parameteres. None of these help.&lt;/p&gt;&#xA;&lt;p&gt;I have the following error message in my journal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# journalctl -b 0 | grep plymouth&#xA;[...] plymouth: unexpectedly disconnected from boot status daemon&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I also tried adding &lt;code&gt;GRUB_GFXMODE&lt;/code&gt; with the native screen resolution in &lt;code&gt;/etc/default/grub&lt;/code&gt;, but it didn’t help. Plymouth works fine on the same machine using Arch Linux. I’m out of ideas. Does anybody here have one?&lt;/p&gt;&#xA;" OwnerUserId="26565" LastEditorUserId="26565" LastEditDate="2021-08-12T22:30:57.120" LastActivityDate="2021-10-23T08:32:03.763" Title="Black screen instead of plymouth" Tags="|boot|plymouth|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28330" PostTypeId="1" CreationDate="2021-08-11T06:29:52.507" Score="0" ViewCount="278" Body="&lt;p&gt;I installed the new elementary OS on my Lenovo laptop. Network settings only shows wired network.&lt;/p&gt;&#xA;" OwnerUserId="26566" LastActivityDate="2021-09-10T09:06:15.500" Title="Unable to turn on Wifi adaptor after updating to Odin" Tags="|wifi|drivers|lenovo|release-odin|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28332" PostTypeId="1" CreationDate="2021-08-11T07:01:13.130" Score="1" ViewCount="4452" Body="&lt;p&gt;I have a Dell Inspiron 1370 2in1 w Pentium 1Tb SSD and 4GB RAM running elementary OS 5.1 for the last 2 years.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Downloaded elementary OS 6, did checksum. Passed&lt;/li&gt;&#xA;&lt;li&gt;Reformatted a fresh 8Gb USB flash Drive and verified OK.&lt;/li&gt;&#xA;&lt;li&gt;Checked the internal SSD in the Dell Inspiron (currently had elementary 5.1). OK.&lt;/li&gt;&#xA;&lt;li&gt;Created installer USB with Etcher, verified OK&lt;/li&gt;&#xA;&lt;li&gt;Ran as Demo worked OK&lt;/li&gt;&#xA;&lt;li&gt;Ran installation. Reformat SSD failed:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Details&#xA;&lt;em&gt;commit logical partitions: unable to create volume group 'data_mepHe' on &amp;quot;dev/mapper/data_mepHe&amp;quot;:&#xA;vgcreate failed with status: 5 (input/output error (os error 5)&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Tried reboot twice. Same result.&#xA;Removed USB and rebooted. Can't find internal drive.&lt;/p&gt;&#xA;&lt;p&gt;What do I try next?&lt;/p&gt;&#xA;" OwnerUserId="26567" LastActivityDate="2021-08-27T17:52:03.667" Title="Failed Installation of elementary oS 6" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28333" PostTypeId="2" ParentId="28332" CreationDate="2021-08-11T07:08:11.750" Score="2" Body="&lt;p&gt;Use Gparted with a live USB to reformat the SSD and then try again?&#xA;You will need to check which distros come with Gparted on the live USB.&lt;/p&gt;&#xA;" OwnerUserId="26164" LastActivityDate="2021-08-11T07:08:11.750" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="28334" PostTypeId="2" ParentId="28330" CreationDate="2021-08-11T07:10:34.080" Score="1" Body="&lt;p&gt;You have to find out what your wireless adapter is and then get those drivers installed. There are some good guides around for Broadcom e.g., &lt;a href=&quot;https://www.thetestspecimen.com/posts/broadcom-bluetooth-fedora/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.thetestspecimen.com/posts/broadcom-bluetooth-fedora/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26164" LastActivityDate="2021-08-11T07:10:34.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28336" PostTypeId="2" ParentId="28286" CreationDate="2021-08-11T07:55:16.277" Score="0" Body="&lt;p&gt;Have tried it today and:&lt;/p&gt;&#xA;&lt;p&gt;it seems that input window hiding behind main one is probably just coincidence?, but... there was another/additional window hiding quietly behind main one when things froze&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vs5hq.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vs5hq.jpg&quot; alt=&quot;error message&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Deleting this window allowed me to close the program and start again.&lt;/p&gt;&#xA;&lt;p&gt;PS posting it as an answer (even though it is question not an answer) because:&lt;/p&gt;&#xA;&lt;p&gt;a)Please avoid extended discussions in comments.&#xA;Would you like to automatically move this discussion to chat?&lt;/p&gt;&#xA;&lt;p&gt;b)wanted to include the picture and (I believe) it is not possible in chat&lt;/p&gt;&#xA;&lt;p&gt;PS I must admit that I am not impressed with stackexchange's funcionality :-(&lt;/p&gt;&#xA;&lt;p&gt;but hey, it is what it is...&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;had another go at editing dimensions, making sure that the input windows was away from main one.&lt;/p&gt;&#xA;&lt;p&gt;All was going well, until :-)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/0vu9M.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/0vu9M.jpg&quot; alt=&quot;error messages&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The only way out of this one was to shutdown elementary and start again...&lt;/p&gt;&#xA;&lt;p&gt;After repeated attempts it all seems to be coming back to &lt;strong&gt;user32.dll&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;one more EDIT:&lt;/strong&gt;&#xA;if I execute any of these simulation programs from terminal, I get the following error message (although it deosn't stop things running?):&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;wine SlipEccen.exe&lt;/p&gt;&#xA;&lt;p&gt;006c:err:vulkan:wine_vk_init Failed to load libvulkan.so.1.&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-08-11T08:48:50.940" LastActivityDate="2021-08-11T08:48:50.940" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28337" PostTypeId="2" ParentId="28330" CreationDate="2021-08-11T07:58:48.973" Score="1" Body="&lt;p&gt;Maybe this helps as well, at least for me standard procedure without installing  Kernel headers first did not work: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/28315/26554&quot;&gt;https://elementaryos.stackexchange.com/a/28315/26554&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26554" LastActivityDate="2021-08-11T07:58:48.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28338" PostTypeId="1" AcceptedAnswerId="28351" CreationDate="2021-08-11T07:59:46.750" Score="2" ViewCount="1963" Body="&lt;p&gt;Downloaded the ISO file for eOS 6 and tried to test-run in VirtuaBox.&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately, the Elementary installer window is out of bounds and the usual &amp;quot;press ALT and drag the window with the mouse&amp;quot; doesn't seem to work in Elementary.&#xA;This makes it unable to move forward in the install process.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hqOK9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hqOK9.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26569" LastActivityDate="2021-09-27T09:50:58.350" Title="Elementary OS 6 doesn't play well with VirtualBox" Tags="|display|resolution|install|virtualbox|" AnswerCount="5" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28339" PostTypeId="1" CreationDate="2021-08-11T09:06:34.887" Score="1" ViewCount="65" Body="&lt;p&gt;Is there a reason for not including some items in the old installer to the new one?&lt;/p&gt;&#xA;&lt;p&gt;For example, in the old installer you can set the hostname, clock, user, etc... This can be set in the command line, but it took me quite some time of googling.&lt;/p&gt;&#xA;&lt;p&gt;Just genuinely curius...&lt;/p&gt;&#xA;" OwnerUserId="26570" LastActivityDate="2023-12-29T20:05:30.660" Title="New Installer vs Old Installer" Tags="|release-odin|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28342" PostTypeId="2" ParentId="28286" CreationDate="2021-08-11T09:43:19.177" Score="0" Body="&lt;p&gt;And finally...&lt;/p&gt;&#xA;&lt;p&gt;It seems the answer is as simple as disabling error message in the simulation program&lt;/p&gt;&#xA;&lt;p&gt;(go: SetUp &amp;gt; SetErrorBeep Off).&lt;/p&gt;&#xA;&lt;p&gt;This allows me to enter new dimensions without things going weird.&lt;/p&gt;&#xA;&lt;p&gt;I have positively confirmed it by switching it on (things go wrong) and switching it off (works OK).&lt;/p&gt;&#xA;&lt;p&gt;I don't need to be warned about dimension's error (I know it will be wrong until I complete entering the data) so disabling error message is not a big deal.&lt;/p&gt;&#xA;&lt;p&gt;Whether it could be made to work by doing something about user32.dll is another story...&lt;/p&gt;&#xA;&lt;p&gt;but I am happy with the compromise solution.&lt;/p&gt;&#xA;&lt;p&gt;@Vlad - big thank you for your help!!&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-08-11T09:43:19.177" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28344" PostTypeId="1" AcceptedAnswerId="28350" CreationDate="2021-08-11T09:46:34.713" Score="1" ViewCount="606" Body="&lt;p&gt;Almost all searches return no results. e.g. searches for Firefox, Discord, Wire, Signal. Is something wrong with the servers or with my installation, or is this normal?&lt;/p&gt;&#xA;" OwnerUserId="26575" LastEditorUserId="26575" LastEditDate="2021-08-11T10:19:50.183" LastActivityDate="2021-08-11T12:00:30.867" Title="eOS 6 - Does the new AppCenter have almost no apps or is something wrong?" Tags="|appcenter|release-odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28345" PostTypeId="2" ParentId="28338" CreationDate="2021-08-11T10:16:17.250" Score="0" Body="&lt;p&gt;This is something that happens on all Distros based on my experience. Virtualbox seems to have a default width and height that cannot be changed except when you install the virtualbox Guest additions, at least when opting for VMSVGA with 3d acceleration on.&lt;/p&gt;&#xA;&lt;p&gt;This is also visible after installing the Guest additions, when you have the windows maximized, and you reach the login screen. that one is also in a very low resolution but the quantity of information is much less.&lt;/p&gt;&#xA;&lt;p&gt;Screen resizing only happens when Pantheon (or any other DE) is fully loaded.&lt;/p&gt;&#xA;" OwnerUserId="26573" LastActivityDate="2021-08-11T10:16:17.250" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28347" PostTypeId="1" CreationDate="2021-08-11T11:17:11.757" Score="1" ViewCount="260" Body="&lt;p&gt;I have tried a live OS and the 4 fingers have partial issues with them, they do not toggle maximizing for example and bunch of other features, but the 3 fingers (vertical, horizontal &amp;amp; pinching) is working fine, I thought that maybe the touchpad is not triggered when I touch using 4 fingers but it works in some cases (like switching between workspaces).&lt;/p&gt;&#xA;&lt;p&gt;The bottom line, is this only happening because i am on a live OS and it will get resolved when i install the system?&lt;/p&gt;&#xA;&lt;p&gt;What if I want to utilize more options that the built-in gestures does not provide, such as:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;4 fingers pinch-in to close the window.&lt;/li&gt;&#xA;&lt;li&gt;4 fingers swipe down to minimize the window.&lt;/li&gt;&#xA;&lt;li&gt;3 fingers swipe down to minimize all windows at once.&lt;/li&gt;&#xA;&lt;li&gt;3 fingers swipe right to go to next tab.&lt;/li&gt;&#xA;&lt;li&gt;3 fingers swipe left to go back (&lt;kbd&gt;alt&lt;/kbd&gt; + &lt;kbd&gt;←&lt;/kbd&gt;)).&lt;/li&gt;&#xA;&lt;li&gt;3 fingers rotation for tiling to right or left.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Can I map custom keyboard shortcuts without breaking the built-in gestures (like disabling some features)?&lt;/p&gt;&#xA;&lt;p&gt;Update 1: My Laptop is Lenovo Legion Y530&lt;/p&gt;&#xA;" OwnerUserId="22395" LastEditorUserId="22395" LastEditDate="2021-08-11T16:56:44.007" LastActivityDate="2021-08-11T16:56:44.007" Title="multi touch gestures on elementary OS 6 Odin partially not working" Tags="|touchpad|gesture|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28348" PostTypeId="2" ParentId="28295" CreationDate="2021-08-11T11:41:21.077" Score="1" Body="&lt;p&gt;I was able to fix this by inserting the USB drive (with the elementary iso) into another Linux machine running on it and typing the following :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;efibootmgr --create --label Elementary --disk /dev/sda1 --loader &amp;quot;\EFI\boot\grubx64.efi&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This is assuming the USB is showing up as sda1.&lt;/p&gt;&#xA;" OwnerUserId="26579" LastActivityDate="2021-08-11T11:41:21.077" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28349" PostTypeId="2" ParentId="28344" CreationDate="2021-08-11T11:43:10.433" Score="2" Body="&lt;p&gt;you have to go to &lt;a href=&quot;https://flathub.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/&lt;/a&gt; to get those apps. Then install them with the Sideload feature of eOS. Look around for info on Flathub and Sideload. You will find that it is very easy to do. Good luck!&lt;/p&gt;&#xA;" OwnerUserId="26580" LastActivityDate="2021-08-11T11:43:10.433" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28350" PostTypeId="2" ParentId="28344" CreationDate="2021-08-11T12:00:30.867" Score="0" Body="&lt;p&gt;Try sideloading at least one app from &lt;a href=&quot;https://flathub.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;FlatHub&lt;/a&gt;, then restart your PC. (Also, be sure to install all updates that show up in the AppCenter.) This will add FlatHub to the list of remotes and AppCenter should start showing all FlatHub apps too.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-08-11T12:00:30.867" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28351" PostTypeId="2" ParentId="28338" CreationDate="2021-08-11T12:07:44.170" Score="0" Body="&lt;p&gt;I had the same problem and was able to solve it by switching the Virtualbox Graphics Controller from VMSVGA to VBoxSVGA in the display settings of Virtualbox (my Virtualbox version is 6.0.4. - host is MacOS Mojave).&#xA;Elementary OS 6 looks great in my test run!&lt;/p&gt;&#xA;" OwnerUserId="26581" LastEditorUserId="26581" LastEditDate="2021-08-11T12:13:32.047" LastActivityDate="2021-08-11T12:13:32.047" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28352" PostTypeId="1" CreationDate="2021-08-11T12:22:40.960" Score="0" ViewCount="75" Body="&lt;p&gt;I often work on a dock and would still like to use the multi touch gestures but can't find an external touchpad except the one from Apple.&lt;/p&gt;&#xA;&lt;p&gt;Can you suggest me good devices?&lt;/p&gt;&#xA;" OwnerUserId="26583" LastActivityDate="2023-12-30T00:10:26.260" Title="(buying advice) external touchpad" Tags="|touchpad|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28353" PostTypeId="1" CreationDate="2021-08-11T12:26:44.463" Score="0" ViewCount="24" Body="&lt;p&gt;I planned to create an app using elementary guideline and to publish it. My plan revolved around an app like KDE connect which is really awesome. I planned to use may be FTP or bluetooth or nextcloud like any service for syncing some files of other developer app. I planned to create android app so that the data can be modified from phone which can be synced to the directories where that database is saved. But my plan about that is stuck at some point because of ONE of the rule given in documentation.&#xA;Rule Says :&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot; Your app must not attempt to modify, replace, or append software sources on the target system.&#xA;Your app must not attempt to modify other apps or system programs.&amp;quot;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/T5BdO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/T5BdO.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But my idea exactly does opposite of these statements.&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Don't you think the documentation statement is a barrier for developer even if its open source app ?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;What does software sources means , which should not be modified ? (contextual sense I dont know)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Does the first line refer to software sources in  locations like /* , /var , /boot , / etc not like /var/log or /home/$USER/.config etc ?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;What exactly modify means on second sentence ? ( Why i am asking because ..... is it about modifying user data or app setting data,,,,, both are different as one is in .config one might be in .local)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Is it okey if I can add Privacy policy or concent that my app can access some of your personal data u want to sync ?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Is it possible to ask other developers ... if i can use their app database and sync ,modify it ?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;pre&gt;&lt;code&gt; if (they say yes || no):&#xA;          above rule still stopping me&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Any clarification around it would be really helpful.&#xA;** My Experience includes android app development (strong rules though for accessing data), bit of web development and Byte of UX development sense.*&lt;/p&gt;&#xA;" OwnerUserId="26582" LastActivityDate="2021-08-11T12:26:44.463" Title="Doubt on Documentation rule for creating app" Tags="|apps|release-odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28354" PostTypeId="2" ParentId="28338" CreationDate="2021-08-11T12:54:56.217" Score="2" Body="&lt;p&gt;This worked for me for the installation issue:&lt;/p&gt;&#xA;&lt;p&gt;Boot the installer in EFI mode not legacy-BIOS mode.&lt;/p&gt;&#xA;&lt;p&gt;It's Settings-&amp;gt;System-&amp;gt;Enable EFI (special OSes only).&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://stackoverflow.com/questions/57115746/virtualbox-screen-resolution-too-small-during-installation&quot;&gt;https://stackoverflow.com/questions/57115746/virtualbox-screen-resolution-too-small-during-installation&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="4821" LastActivityDate="2021-08-11T12:54:56.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28356" PostTypeId="2" ParentId="28352" CreationDate="2021-08-11T13:34:37.627" Score="0" Body="&lt;p&gt;Two things that Apple have nailed and other companies seem to simply &lt;em&gt;do not&lt;/em&gt; get -- trackpads and HiDPI displays. Apple trackpads are by far the best of anything commercially available. I've bought one myself and I'm enjoying the experience -- simply top-notch&lt;/p&gt;&#xA;" OwnerUserId="26587" LastActivityDate="2021-08-11T13:34:37.627" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28360" PostTypeId="1" CreationDate="2021-08-11T14:29:52.883" Score="1" ViewCount="30" Body="&lt;p&gt;I am trying out ElementaryOS (Odin) for the first time on my Asus Vivobook, but for some reason I can't right click on the touchpad, and also I see no option to log in using my touchpad's built in fingerprint reader. I am enjoying ElementaryOS so far, but these are &amp;quot;killer features&amp;quot; that I need if I am to use this operating system. Is there any way to get this working?&lt;/p&gt;&#xA;&lt;p&gt;I've been around the block with Debian and Ubuntu earlier, but consider me a greenhorn.&lt;/p&gt;&#xA;" OwnerUserId="26592" LastActivityDate="2021-08-11T14:29:52.883" Title="Right click and fingerprint reader not working" Tags="|touchpad|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28362" PostTypeId="2" ParentId="28352" CreationDate="2021-08-11T14:45:34.530" Score="0" Body="&lt;p&gt;I asked elementary guys the same question on Twitter and the answer looks the same: in the demo where they show the new gestures, &lt;strong&gt;they use an Apple Magic Trackpad 2&lt;/strong&gt;. I will probably buy one soon. I just wait a confirmation that it works easily with elementary.&#xA;The discussion is here: &lt;a href=&quot;https://twitter.com/nathanaelh/status/1425397957772423171&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://twitter.com/nathanaelh/status/1425397957772423171&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25966" LastActivityDate="2021-08-11T14:45:34.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28363" PostTypeId="2" ParentId="28339" CreationDate="2021-08-11T14:49:59.503" Score="0" Body="&lt;p&gt;It was probably to simplify the installation process. And by the way, you can configure all of those settings in the settings menu after the first login, although that might be cumbersome for some.&lt;/p&gt;&#xA;" OwnerUserId="9688" LastActivityDate="2021-08-11T14:49:59.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28364" PostTypeId="2" ParentId="11010" CreationDate="2021-08-11T14:52:47.480" Score="3" Body="&lt;p&gt;I just encountered an issue related to this in elementaryOS 6 (Odin). The &lt;code&gt;Alt+Shift&lt;/code&gt; shortcut for switching keyboard layouts was interfering with the default &lt;code&gt;Alt+Shift+Tab&lt;/code&gt; shortcut for cycling backwards in the window switcher.&lt;/p&gt;&#xA;&lt;p&gt;Disabling or changing the &lt;code&gt;Switch layout&lt;/code&gt; shortcut did the trick for me.&lt;a href=&quot;https://i.stack.imgur.com/iHNVK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iHNVK.png&quot; alt=&quot;Settings -&amp;gt; Keyboard&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26588" LastActivityDate="2021-08-11T14:52:47.480" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28365" PostTypeId="2" ParentId="28329" CreationDate="2021-08-11T15:25:10.983" Score="3" Body="&lt;p&gt;This bug has to do with changes in the theme between the current and the last version of elementary. They changed the theme so that hardware manufacturers could display their logo during bootup. Apparently, my hardware doesn’t support this feature. I think it’s basically this bug: &lt;a href=&quot;https://github.com/elementary/plymouth-theme/issues/14&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/plymouth-theme/issues/14&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So, my solution was to first clone this git repository.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ git clone https://github.com/elementary/plymouth-theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then I checked out the version of the theme that was used in elementaryOS 5.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ cd plymouth-theme&#xA;$ git checkout 5695a75d1ab37b65a5de23a5ededb0561ef53efd&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then I uninstalled the current version and replaced it with the new one.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt purge plymouth-theme-elementary&#xA;$ sudo cp -r elementary /usr/share/plymouth/themes&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, I had to install the theme.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo rm /etc/alternatives/default.plymouth&#xA;$ sudo ln -s /usr/share/plymouth/themes/elementary/elementary.plymouth /etc/alternatives/default.plymouth&#xA;$ sudo update-initramfs -u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After reboot, I have a working bootsplash.&lt;/p&gt;&#xA;" OwnerUserId="26565" LastActivityDate="2021-08-11T15:25:10.983" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28367" PostTypeId="1" CreationDate="2021-08-11T15:34:09.620" Score="2" ViewCount="61" Body="&lt;p&gt;On EOS6, suspend is broken on my laptop. After suspending (either by closing the laptop lid or remaining idle), the login screen appears as expected, but then the desktop disappears on login. I can activate multitasking view with the touchpad gestures or keyboard shortcut and the wallpaper and various desktops appear, but disappear again to a gray screen if I leave multitasking view. The only way to get back to a regular desktop is to force the laptop to power off by holding down the power button and then reboot.&lt;/p&gt;&#xA;" OwnerUserId="26595" LastActivityDate="2021-08-11T16:01:11.917" Title="Desktop disappears after logging in from suspend" Tags="|suspend|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28369" PostTypeId="2" ParentId="28367" CreationDate="2021-08-11T16:01:11.917" Score="1" Body="&lt;p&gt;I can not help, but confirm I have the same issue on an old ThinkPad T420.&lt;/p&gt;&#xA;&lt;p&gt;I deactivated automatic suspension for now and always shut down the Laptop fully.&lt;/p&gt;&#xA;" OwnerUserId="26597" LastActivityDate="2021-08-11T16:01:11.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28371" PostTypeId="2" ParentId="28326" CreationDate="2021-08-11T16:30:03.623" Score="1" Body="&lt;p&gt;.deb packages can be installed in the console with dpkg -i&lt;/p&gt;&#xA;&lt;p&gt;Flatpaks can be downloaded from the Flathub. After installing one flatpak from there, all other available flatpaks will show up in the App Center.&lt;/p&gt;&#xA;" OwnerUserId="26597" LastActivityDate="2021-08-11T16:30:03.623" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28372" PostTypeId="1" CreationDate="2021-08-11T16:34:04.693" Score="0" ViewCount="16" Body="&lt;p&gt;on Core2Duo Imac, after standby/sleep, the display remains dim and faded.&lt;/p&gt;&#xA;&lt;p&gt;I tried all of the suggestions I could find unsuccessfully, they mostly related to battery/power setting or modifying gnome display settings.&lt;/p&gt;&#xA;&lt;p&gt;This was present in the V5 build and was enough of an annoyance that I discontinued using Elementary OS.  I've just tested it in the V6 release and it remains unchanged.&lt;/p&gt;&#xA;" OwnerUserId="26598" LastActivityDate="2024-01-11T02:03:50.467" Title="on C2D Imac, after standby/sleep the display remains dim and faded" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28373" PostTypeId="1" CreationDate="2021-08-11T16:46:16.400" Score="0" ViewCount="174" Body="&lt;p&gt;I just installed eOS 6. I was running Pop OS and backed up two Firefox profiles. I am trying to restore them.&lt;/p&gt;&#xA;&lt;p&gt;I installed Firefox from flathub and pressing profile directory does not open a new window. When I try to manually navigate there, the window explorer says &amp;quot;This folder does not exist.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I tried rebooting and the problem remain. Any responses would be greatly appreciated.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="26599" LastActivityDate="2021-08-12T21:04:13.787" Title="Firefox Cannot Open Profile Directory" Tags="|firefox|profile|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28374" PostTypeId="1" AcceptedAnswerId="28377" CreationDate="2021-08-11T17:03:07.663" Score="1" ViewCount="398" Body="&lt;p&gt;When shutting down Elementary 6 Odin, the splashscreen is not presented but instead it is showing the shutdown command text. This is following a fresh install from flash. On startup it is set to quiet launch with no logo splash or commands.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Keno's answer worked, Thank you.&#xA;I also updated my graphics drivers with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xserver-xorg-video-intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In fact it may be worth updating your intel drivers first.&lt;/p&gt;&#xA;" OwnerUserId="20598" LastEditorUserId="3018" LastEditDate="2021-08-12T10:22:01.813" LastActivityDate="2021-08-12T10:22:01.813" Title="Shutdown splash not working" Tags="|greeter|shutdown|logo|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28375" PostTypeId="2" ParentId="28297" CreationDate="2021-08-11T18:14:53.953" Score="3" Body="&lt;p&gt;If you don't have &lt;code&gt;/home&lt;/code&gt; partition I would simply say forget about it. Take backup of data and format it. but just avoid repeating same mistake because eOS 6.0 is not forever by creating &lt;code&gt;/home&lt;/code&gt; partition will save you in future.&lt;/p&gt;&#xA;" OwnerUserId="17867" LastActivityDate="2021-08-11T18:14:53.953" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28376" PostTypeId="1" CreationDate="2021-08-11T18:24:31.100" Score="0" ViewCount="692" Body="&lt;p&gt;Attempting to boot the installation media for Elementary OS 6 release on a Dell Precision 7540.  I've attempted to boot off USB media and then attempted to burn DVD media; same outcome.&lt;/p&gt;&#xA;&lt;p&gt;I select the multi-boot menu from Dell, select either the USB or DVD and after a few seconds I get the following message on the screen:&#xA;Failed to open \EFI\BOOT? - Invalid Parameter&#xA;Failed to load image \EFI\BOOT?: Invalid Parameter&#xA;start_image() returned Invalid Parameter&lt;/p&gt;&#xA;&lt;p&gt;I have secure boot turned off.&lt;/p&gt;&#xA;" OwnerUserId="26602" LastActivityDate="2021-08-12T13:44:05.277" Title="Elementary OS 6 fails to boot UEFI" Tags="|release-odin|" AnswerCount="3" CommentCount="2" ClosedDate="2021-08-13T22:05:05.453" ContentLicense="CC BY-SA 4.0" />
  <row Id="28377" PostTypeId="2" ParentId="28374" CreationDate="2021-08-11T18:36:39.220" Score="1" Body="&lt;p&gt;I believe this is the same issue I had, but you don't use disk encryption so you just see a black screen shortly on boot and then are greeted by the login manager.&lt;/p&gt;&#xA;&lt;p&gt;See here for my solution: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28329/black-screen-instead-of-plymouth&quot;&gt;Black screen instead of plymouth&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;(Sorry, I can't post this as a comment because I don't have enough reputation)&lt;/p&gt;&#xA;" OwnerUserId="26565" LastActivityDate="2021-08-11T18:36:39.220" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28378" PostTypeId="1" CreationDate="2021-08-11T18:36:44.157" Score="1" ViewCount="984" Body="&lt;p&gt;There are only few apps on appcenter.&#xA;I can't install eddy to install .deb packages.&#xA;I tried installing a flatpak app and it didn't work.&#xA;I saw a few users asking about the same.&lt;/p&gt;&#xA;" OwnerUserId="26603" LastActivityDate="2021-08-22T07:49:21.470" Title="Almost no apps on appcenter" Tags="|appcenter|" AnswerCount="3" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28380" PostTypeId="2" ParentId="28373" CreationDate="2021-08-11T18:39:06.087" Score="1" Body="&lt;p&gt;If it is flatpak install then Firefox profile should be located here:&lt;/p&gt;&#xA;&lt;p&gt;/home/user/.var/app/&lt;/p&gt;&#xA;&lt;p&gt;whereas &amp;quot;normally&amp;quot; it resides here:&lt;/p&gt;&#xA;&lt;p&gt;/home/user/.mozilla/firefox&lt;/p&gt;&#xA;&lt;p&gt;at least this is the case on my 5.7.1 elementary OS&lt;/p&gt;&#xA;&lt;p&gt;In Firefox, if I select&lt;/p&gt;&#xA;&lt;p&gt;Help&amp;gt;More Troubleshooting Information&amp;gt;about:profiles&lt;/p&gt;&#xA;&lt;p&gt;I can open profile directory (but in my case it is not flatpak install, in case it makes difference?)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-08-11T18:39:06.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28382" PostTypeId="2" ParentId="28378" CreationDate="2021-08-11T18:41:08.113" Score="0" Body="&lt;p&gt;.deb packages can be installed with sudo dpkg -i name.of.package.deb&lt;/p&gt;&#xA;&lt;p&gt;Yes, empty AppCenter - most odd. Presumably the content's not been migrated over yet.&lt;/p&gt;&#xA;" OwnerUserId="26606" LastActivityDate="2021-08-11T18:41:08.113" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28383" PostTypeId="1" CreationDate="2021-08-11T18:44:10.987" Score="0" ViewCount="1139" Body="&lt;p&gt;I tried installation using Vbox/Ubuntu 20.04. Screen is too small, but using Tab-Tab-Enter I reached partitioning screen, which ended with failure.&lt;/p&gt;&#xA;&lt;p&gt;What is procedure to instal Odin to VBox?&lt;/p&gt;&#xA;" OwnerUserId="26607" LastActivityDate="2024-01-31T19:03:20.470" Title="Installation to VirtualBox" Tags="|virtualbox|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28385" PostTypeId="1" CreationDate="2021-08-11T19:02:44.010" Score="0" ViewCount="313" Body="&lt;p&gt;Running VMware Workstation Pro 16.1.x on Windows. Cannot install Elementary OS 6 from VM because display area is too small.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/fwZHy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fwZHy.png&quot; alt=&quot;Screenshot of issue&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26229" LastActivityDate="2021-08-20T15:47:35.350" Title="Running latest version of VMware Workstation Pro 16.x but cannot install Elementary OS 6 due to UI dialog being too big" Tags="|install|virtualization|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28386" PostTypeId="2" ParentId="28378" CreationDate="2021-08-11T19:10:55.640" Score="2" Body="&lt;p&gt;If you sideload a flatpak from flathub.org you'll automatically add their repo, and populate Appcenter a bit more.&lt;/p&gt;&#xA;&lt;p&gt;Other than that it seems AppCenter won't support deb packages anymore. So yes, you can still install deb programs via the terminal, but I'm afraid you'll then need to manually update them, because appcenter won't do it for you.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/p21ruc/what_the_hell_happened_to_eddy/h8jldha?utm_source=share&amp;amp;utm_medium=web2x&amp;amp;context=3&quot; rel=&quot;nofollow noreferrer&quot;&gt;The reasoning&lt;/a&gt; for this apparently is that some users found non curated apps &amp;quot;ugly&amp;quot; so now they castrated the whole os for it.&lt;/p&gt;&#xA;" OwnerUserId="26609" LastActivityDate="2021-08-11T19:10:55.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28387" PostTypeId="1" CreationDate="2021-08-11T19:20:50.980" Score="1" ViewCount="498" Body="&lt;p&gt;Cannot install .deb packages, even google chrome. used Gdebi and ubuntu software center, no results. Eddy also not present in the appcente&lt;/p&gt;&#xA;" OwnerUserId="26610" LastActivityDate="2022-09-08T19:07:10.733" Title="Cannot install .deb packages, even google chrome. used Gdebi and ubuntu software center, no results. Eddy also not present in the appcenter" Tags="|applications|appcenter|" AnswerCount="4" CommentCount="1" FavoriteCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28389" PostTypeId="1" CreationDate="2021-08-11T20:09:23.887" Score="1" ViewCount="97" Body="&lt;p&gt;Elementary OS 5 would give you the full shutdown dialogue box when you press the power button after enabling it in the settings. This functioned identically as pressing &amp;quot;Shut down&amp;quot; under the power option in the top panel. Now on eOS 6 when you press the power button it pops up with an identical dialogue box but without the restart option: you can only Shut Down or Cancel. Is there a way to get this back or are you just stuck using the terminal or the power dialogue?&lt;/p&gt;&#xA;" OwnerUserId="26613" LastActivityDate="2023-12-30T07:03:30.373" Title="Why is there no &quot;Restart&quot; option in the power button shut down dialogue?" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28390" PostTypeId="2" ParentId="17238" CreationDate="2021-08-11T20:39:54.153" Score="1" Body="&lt;p&gt;Try install grub-customizer&lt;/p&gt;&#xA;&lt;p&gt;and change&lt;/p&gt;&#xA;&lt;p&gt;linux /boot/vmlinuz-5.11.0-25-generic root=/dev/mapper/data-root ro quiet splash &lt;strong&gt;video=hiperv_fb:1920x1080 $vt_handoff&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;linux /boot/vmlinuz-5.11.0-25-generic root=/dev/mapper/data-root ro quiet splash &lt;strong&gt;$vt_handoff video=hiperv_fb:1920x1080&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;the problem is &lt;strong&gt;$vt_handoff&lt;/strong&gt; you need &lt;strong&gt;video=hiperv_fb:1920x1080&lt;/strong&gt; in last part of sentence&lt;/p&gt;&#xA;" OwnerUserId="26614" LastActivityDate="2021-08-11T20:39:54.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28391" PostTypeId="1" CreationDate="2021-08-11T21:08:55.500" Score="0" ViewCount="32" Body="&lt;p&gt;I cannot find a debian package installer or eddy-like software to install chrome and other .deb setup. I have tried Gdebi but it does not work. Help please&lt;/p&gt;&#xA;" OwnerUserId="26616" LastActivityDate="2021-08-11T23:22:34.547" Title="Problems with downloading .deb packages" Tags="|applications|appcenter|" AnswerCount="0" CommentCount="0" FavoriteCount="0" ClosedDate="2021-08-12T10:21:09.457" ContentLicense="CC BY-SA 4.0" />
  <row Id="28392" PostTypeId="1" CreationDate="2021-08-11T22:03:16.927" Score="0" ViewCount="125" Body="&lt;p&gt;Nice day I'm testing the new version of elementary and I have a hard time in the application center. Applications available do not appear in repositories. I attach a screenshot&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/F8JI4.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F8JI4.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26618" LastActivityDate="2023-12-31T01:03:10.360" Title="appcenter error" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28394" PostTypeId="1" CreationDate="2021-08-11T22:18:41.637" Score="1" ViewCount="640" Body="&lt;p&gt;I installed elementary OS 6, done a few things on it including installing Firefox from FlatHub. Then I restarted the PC and tried to launch the AppCenter again. However, this didn't do anything. Trying to run it from the Terminal, I get:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ io.elementary.appcenter&#xA;Failed to register: Timeout was reached&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Nonetheless, running &lt;code&gt;--help&lt;/code&gt; does finish:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ io.elementary.appcenter --help&#xA;&#xA;Usage:&#xA;  io.elementary.appcenter [OPTION?]&#xA;&#xA;Help Options:&#xA;  -h, --help                              Show help options&#xA;  --help-all                              Show all help options&#xA;  --help-gapplication                     Show GApplication options&#xA;  --help-gtk                              Show GTK+ Options&#xA;&#xA;Application Options:&#xA;  -u, --show-updates                      Display the Installed Panel&#xA;  -s, --silent                            Run the Application in background&#xA;  -l, --load-local=FILENAME               Add a local AppStream XML file to the package list&#xA;  -f, --fake-package-update=PACKAGES?     Add the package name to update results so that it is shown as an update&#xA;  --display=DISPLAY                       X display to use&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2021-08-11T22:24:29.450" LastActivityDate="2022-03-20T21:59:49.587" Title="AppCenter does not start" Tags="|appcenter|release-odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28395" PostTypeId="2" ParentId="28387" CreationDate="2021-08-11T23:19:20.943" Score="1" Body="&lt;p&gt;Install Gdebi via terminal by typing&#xA;&amp;quot;sudo apt install gdebi&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Then restart your pc and open &amp;quot;Gdebi Package Installer&amp;quot; under Applications and select &amp;quot;File&amp;quot; &amp;gt; &amp;quot;Open&amp;quot; and open the .deb package you'd like to open. Alternatively open the package in terminal too.&lt;/p&gt;&#xA;&lt;p&gt;open terminal and type&#xA;&amp;quot;Sudo gdebi /location/package.deb&amp;quot;&#xA;replacing the location for the file location and package for the file name. You have to type the full location name, it doesn't matter if you're already in the directory.&lt;/p&gt;&#xA;" OwnerUserId="20598" LastActivityDate="2021-08-11T23:19:20.943" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28396" PostTypeId="2" ParentId="28387" CreationDate="2021-08-11T23:22:34.547" Score="1" Body="&lt;p&gt;Install Gdebi via terminal by typing &amp;quot;sudo apt install gdebi&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Then restart your pc and open &amp;quot;Gdebi Package Installer&amp;quot; under Applications and select &amp;quot;File&amp;quot; &amp;gt; &amp;quot;Open&amp;quot; and open the .deb package you'd like to open. Alternatively open the package in terminal too.&lt;/p&gt;&#xA;&lt;p&gt;open terminal and type &amp;quot;Sudo gdebi /location/package.deb&amp;quot; replacing the location for the file location and package for the file name. You have to type the full location name, it doesn't matter if you're already in the directory.&lt;/p&gt;&#xA;" OwnerUserId="20598" LastActivityDate="2021-08-11T23:22:34.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28398" PostTypeId="2" ParentId="28389" CreationDate="2021-08-12T00:11:04.943" Score="0" Body="&lt;p&gt;This seems to have been addressed already - I have an option to restart when I left click the power icon and select Shut down... as well as when I middle click the power icon.&lt;/p&gt;&#xA;" OwnerUserId="26595" LastActivityDate="2021-08-12T00:11:04.943" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28399" PostTypeId="1" CreationDate="2021-08-12T02:07:56.230" Score="0" ViewCount="271" Body="&lt;p&gt;Sorry if I don't provide enough information, it's just that I'm not very savvy with these things. I tried to install elementary OS 6 Odin on a separate HDD while having a Windows 10 installation on my main SSD hoping to be able to dual-boot between them. Now, however, I am unable to boot up Windows 10. GRUB only shows Elementary, Advanced Settings and Advanced UEFI Settings or something like that. And if I try to boot up Windows by booting directly from the SSD, I get an error message stating that the device is unaccessible.&lt;/p&gt;&#xA;&lt;p&gt;I think it's an error with the boot partitions but I've no idea how to solve it. I'm very worried about this as my Windows 10 installation is very important. How can I get it back?&lt;/p&gt;&#xA;&lt;p&gt;Thanks a lot in advance!&lt;/p&gt;&#xA;" OwnerUserId="26622" LastEditorUserId="26622" LastEditDate="2021-08-12T02:13:16.167" LastActivityDate="2022-01-09T06:03:45.397" Title="I tried to install Odin on a separate drive to dual-boot with Windows 10 but now I cant use Windows" Tags="|dual-boot|grub|microsoft-windows|release-odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28400" PostTypeId="2" ParentId="28378" CreationDate="2021-08-12T02:45:00.403" Score="0" Body="&lt;p&gt;&lt;strong&gt;Eddy now are in AppCenter DON'T INSTALL FROM GITHUB&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I was able to install Eddy from the terminal like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git&#xA;sudo apt install valac libgranite-dev libpackagekit-glib2-dev libunity-dev&#xA;sudo apt install meson&#xA;git clone https://github.com/donadigo/eddy.git  &#xA;sudo apt install libzeitgeist-2.0-dev&#xA;meson build &amp;amp;&amp;amp; cd build&#xA;meson configure -Dprefix=/usr&#xA;ninja&#xA;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and to run the application:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;com.github.donadigo.eddy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2021-08-14T17:14:28.570" LastActivityDate="2021-08-14T17:14:28.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28402" PostTypeId="2" ParentId="28309" CreationDate="2021-08-12T04:31:09.980" Score="0" Body="&lt;p&gt;Unfortunately I cannot comment: use the checkmark left to my answer, below the down/upvote arrows to mark it as solved&lt;/p&gt;&#xA;" OwnerUserId="26554" LastActivityDate="2021-08-12T04:31:09.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28403" PostTypeId="2" ParentId="28383" CreationDate="2021-08-12T04:51:20.767" Score="0" Body="&lt;p&gt;In the settings for the VM, open the System section and go to the Motherboard tab. Under Extended Features, check the &lt;strong&gt;Enable EFI (special OSes only)&lt;/strong&gt; box. This &lt;em&gt;should&lt;/em&gt; enable it to boot. It worked for me.&lt;/p&gt;&#xA;" OwnerUserId="26625" LastActivityDate="2021-08-12T04:51:20.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28404" PostTypeId="2" ParentId="28385" CreationDate="2021-08-12T04:53:23.670" Score="0" Body="&lt;p&gt;On &lt;em&gt;VirtualBox&lt;/em&gt;, you have to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/28403/26625&quot;&gt;enable EFI mode&lt;/a&gt;. Perhaps there is a similar setting for VMWare.&lt;/p&gt;&#xA;" OwnerUserId="26625" LastActivityDate="2021-08-12T04:53:23.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28406" PostTypeId="1" CreationDate="2021-08-12T06:40:38.520" Score="0" ViewCount="1114" Body="&lt;p&gt;I tried to login to my Gmail account using the default Mail app. But getting error like &lt;em&gt;Invalid credentials&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/sJWk8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/sJWk8.png&quot; alt=&quot;error msg while logging in&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23403" LastActivityDate="2023-12-30T20:00:55.103" Title="Could not login to my Gmail account via the inbuilt Mail app in EOS6" Tags="|pantheon-mail|release-odin|evolution|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28408" PostTypeId="2" ParentId="28376" CreationDate="2021-08-12T07:53:13.657" Score="0" Body="&lt;p&gt;I had a similar problem with my Dell. Although I didn't get the error msg that you did, it would not boot from my USB. In addition to turning off secure boot, I also disabled PTT Security, and, &lt;em&gt;enabled&lt;/em&gt; Legacy Option ROMS. This solved the problem for me.&lt;/p&gt;&#xA;" OwnerUserId="26580" LastActivityDate="2021-08-12T07:53:13.657" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28409" PostTypeId="2" ParentId="28376" CreationDate="2021-08-12T08:12:34.120" Score="0" Body="&lt;p&gt;I have the same problem on my desktop core i7 4790 on CM asus MAXIMUS VII RANGER Z97 chipset bios v3503. I downloaded and checked Elementary OS 6 image several times, I tried to burn it with etcher as recommended or rufus, in MBR or GPT format.&#xA;The key created refuses to start in UEFI mode no matter if the secure boot is activated or not I always have the following error message :&#xA;&amp;quot;Invalid image&#xA;Failed to read header : Unsupported&#xA;Failed to load image : Unsupported&#xA;start_image() returned Unsupported&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I must specify that I never had this kind of problem before on this PC and that I installed several distributions in UEFI without encountering this error including ubuntu 20.04 LTS.&lt;/p&gt;&#xA;&lt;p&gt;The only solution I found to boot on the installation key is to activate CSM (compatibility support module) in legacy mode in the bios boot options. But in this case impossible to install elementary os in UEFI mode ...&lt;/p&gt;&#xA;&lt;p&gt;Weird the same install key works perfectly on my other more recent desktop.&lt;/p&gt;&#xA;" OwnerUserId="26630" LastActivityDate="2021-08-12T08:12:34.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28410" PostTypeId="1" CreationDate="2021-08-12T08:27:48.373" Score="0" ViewCount="1793" Body="&lt;p&gt;Installation media refuses to boot in UEFI on my desktop core i7 4790 with asus MAXIMUS VII RANGER Z97 chipset motherboard bios v3503. I downloaded and checked Elementary OS 6 image several times, I tried to burn it with Etcher as recommended or Rufus, in MBR or GPT format. The created key refuses to start in UEFI mode. No matter if the secure boot is activated or not I always get the following error message :&#xA;&amp;quot;Invalid image&#xA;Failed to read header : Unsupported&#xA;Failed to load image : Unsupported&#xA;start_image() returned Unsupported&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I must specify that I never had this kind of problem before on this PC and that I installed several distributions in UEFI without encountering this error including ubuntu 20.04 LTS.&lt;/p&gt;&#xA;&lt;p&gt;The only solution I found to boot on the installation key is to activate CSM (compatibility support module) in legacy mode in the bios boot options. But in this case impossible to install Elementary os in UEFI mode ...&lt;/p&gt;&#xA;&lt;p&gt;Weird the same install key works perfectly on my other more recent desktop.&lt;/p&gt;&#xA;" OwnerUserId="26630" LastActivityDate="2021-08-12T13:09:24.870" Title="Elementary OS 6 installation media fails to boot UEFI" Tags="|system-installation|usb-drive|release-odin|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28411" PostTypeId="1" CreationDate="2021-08-12T08:33:14.620" Score="2" ViewCount="195" Body="&lt;p&gt;I have a problem with installing a fingerprint, I did everything that was in the solution of this article: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28318/how-can-i-sign-in-with-my-fingerprint-on-elementary-os-6-odin&quot;&gt;How can I sign in with my fingerprint on Elementary OS 6 Odin?&lt;/a&gt;&#xA;But &lt;code&gt;fprintd-enroll&lt;/code&gt; an error &lt;code&gt;Impossible to enroll: GDBus.Error:net.reactivated.Fprint.Error.NoSuchDevice: No devices available&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;There is a driver for ubuntu 18.04 .rar on the manufacturer's website, how can I install them if they fit or how can I install other compatible drivers?&lt;/p&gt;&#xA;&lt;p&gt;I tried to do everything that was indicated in the readme, but there was an error with the ppa connection, apparently the drivers for ubuntu 18 and 20 are incompatible&lt;/p&gt;&#xA;" OwnerUserId="26572" LastActivityDate="2022-01-09T07:00:55.227" Title="Fingerprint driver" Tags="|drivers|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28414" PostTypeId="2" ParentId="28383" CreationDate="2021-08-12T11:05:36.967" Score="0" Body="&lt;p&gt;Or you could first enter the Live &amp;quot;Testing&amp;quot; mode (by &amp;quot;Tab-Tab-Enter&amp;quot;), then change to a higher screen resolution in the Live-Session, and then start the OS-Installer from within the Live-Session.&lt;/p&gt;&#xA;&lt;p&gt;This worked for me. *cheers#&lt;/p&gt;&#xA;" OwnerUserId="26638" LastActivityDate="2021-08-12T11:05:36.967" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28415" PostTypeId="2" ParentId="28410" CreationDate="2021-08-12T11:18:06.337" Score="0" Body="&lt;p&gt;It happens immediately after the initialization when the installation key tries to boot up in UEFI mode (both CSM &amp;amp; SECURE BOOT disabled in boot bios settings).&#xA;No need to wait long it opens the bios setup screen after a few seconds.&lt;/p&gt;&#xA;&lt;p&gt;I don't have any other OS installed. The only drive plugged is an empty SSD without any partition on it waiting to receive the system.&lt;/p&gt;&#xA;" OwnerUserId="26630" LastActivityDate="2021-08-12T11:18:06.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28416" PostTypeId="2" ParentId="28410" CreationDate="2021-08-12T11:43:07.557" Score="1" Body="&lt;p&gt;I hope the folks at Elementary get a new ISO out soon!&#xA;Why they are so slow to respond on both Facebook and other forums is not good. They need to get a new ISO out ASAP.&lt;/p&gt;&#xA;&lt;p&gt;Imagine your band just released a new album with all kinds of promo and press releases only to find out that all the tracks are garbled when downloaded from iTunes or Amazon.&lt;/p&gt;&#xA;&lt;p&gt;See:&#xA;&lt;a href=&quot;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/shim/+bug/1937115&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/shim/+bug/1937115&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26639" LastActivityDate="2021-08-12T11:43:07.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28417" PostTypeId="1" CreationDate="2021-08-12T11:46:09.197" Score="1" ViewCount="3558" Body="&lt;p&gt;Installing in VMWare Workstation Player, the display is so small that it makes it impossible to reply to the multiple installation screens.  There should the option to start as a live session, then enlarge the display resolution and then start the installation.&lt;/p&gt;&#xA;&lt;p&gt;In VirtualBox, when poiting to the ISO (checksum verified), and trying to start this ISO file, I got the error:&#xA;&amp;quot;FATAL: No bootable media found! System halted&amp;quot;.&#xA;It is the same media that started installation in VMWare, without errors, just the small screen.&lt;/p&gt;&#xA;&lt;p&gt;I have many linux distros installed in both VMWare and VirtualBox all running without problems.&lt;/p&gt;&#xA;" OwnerUserId="26640" LastActivityDate="2022-01-25T19:08:04.833" Title="Elementary OS 6 ISO unable to install in VMWare and VirtualBox" Tags="|virtualbox|virtualization|" AnswerCount="4" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28418" PostTypeId="1" CreationDate="2021-08-12T12:25:11.197" Score="0" ViewCount="395" Body="&lt;p&gt;Tried &amp;quot;sudo su&amp;quot; then &amp;quot;nano /etc/hostname&amp;quot; I dont seem to find a way to save that. Ctrl+O change options at the bottom. Now, I have other options but not sure how to exit after actually saving it. It's not saved as hostname is the same after reboot as before.&lt;/p&gt;&#xA;" OwnerUserId="26484" LastActivityDate="2021-08-12T23:02:41.143" Title="How to change hostname in Odin?" Tags="|settings|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28419" PostTypeId="2" ParentId="28417" CreationDate="2021-08-12T12:34:19.847" Score="0" Body="&lt;p&gt;In VMWare using &amp;quot;Tab-tab-enter&amp;quot; I could manage to install Elementary OS without having all the installation screens fully displayed.  This should not happen.&lt;/p&gt;&#xA;&lt;p&gt;It remains the error reported in Virtualbox to solve.&lt;/p&gt;&#xA;" OwnerUserId="26640" LastActivityDate="2021-08-12T12:34:19.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28420" PostTypeId="2" ParentId="28410" CreationDate="2021-08-12T12:52:53.703" Score="0" Body="&lt;p&gt;I gave a try to Workaround 2 from &lt;a href=&quot;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&lt;/a&gt; and it worked nice for me THX !&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;If you are unable to disable secure boot, or the previous workaround doesn't work, the next best option is to download an Ubuntu 20.04.2 iso and copy the EFI folder from it to the elementary media (overwriting the original EFI files).&lt;/p&gt;&#xA;&lt;p&gt;Whether this is possible depends on how the iso has been written to the USB media as sometimes it is left in a read-only state. If you are able, you can manually format the USB stick as FAT32 with a GPT partition table, then copy the files to it from within the elementary iso. Then you should be able to replace the EFI folder with an Ubuntu one afterwards.&lt;/p&gt;&#xA;&lt;p&gt;Using this workaround should allow secure boot to function correctly.&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="26630" LastEditorUserId="26630" LastEditDate="2021-08-12T13:09:24.870" LastActivityDate="2021-08-12T13:09:24.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28421" PostTypeId="2" ParentId="28406" CreationDate="2021-08-12T13:09:09.500" Score="0" Body="&lt;p&gt;You need to create an app password and use that to log in in elementary.&lt;/p&gt;&#xA;&lt;p&gt;Follow these instructions to create a new app password:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to your Google Account.&lt;/li&gt;&#xA;&lt;li&gt;Select Security.&lt;/li&gt;&#xA;&lt;li&gt;Under &amp;quot;Signing in to Google,&amp;quot; select App Passwords. You may need to sign in. If you don’t have this option, it might be because:&#xA;2-Step Verification is not set up for your account.&#xA;2-Step Verification is only set up for security keys.&#xA;Your account is through work, school, or other organization.&#xA;You turned on Advanced Protection.&lt;/li&gt;&#xA;&lt;li&gt;At the bottom, choose Select app and choose the app you using and then Select device and choose the device you’re using and then Generate.&lt;/li&gt;&#xA;&lt;li&gt;Follow the instructions to enter the App Password. The App Password is the 16-character code in the yellow bar on your device.&lt;/li&gt;&#xA;&lt;li&gt;Tap Done.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;(from: &lt;a href=&quot;https://support.google.com/accounts/answer/185833?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/accounts/answer/185833?hl=en&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;p&gt;Now simply go to online accounts and use that newly-created password to authenticate.&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2021-08-12T13:09:09.500" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28423" PostTypeId="1" CreationDate="2021-08-12T13:34:06.013" Score="3" ViewCount="930" Body="&lt;p&gt;I'm trying to understand the whole online accounts thing. I got how to add gmail and other SMTP emails to online accounts, but I'm not having any luck with calendars. I've found &lt;a href=&quot;https://blog.mozilla.org/calendar/2013/09/google-is-changing-the-location-url-of-their-caldav-calendars/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; about the CalDAV URL, but using&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;https://apidata.googleusercontent.com/caldav/v2/your-email-address/events&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;as the CalDAV server gives me an error:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ba9wT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ba9wT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is regardless if I use my gmail password or a unique app password.&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2021-08-15T10:08:05.277" Title="How do I add google calendars to online accounts on Odin?" Tags="|calendar|release-odin|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28424" PostTypeId="2" ParentId="28376" CreationDate="2021-08-12T13:44:05.277" Score="0" Body="&lt;p&gt;Give a try to this :  &lt;a href=&quot;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74?fbclid=IwAR2YEuN2U9vgW3LNDk5WwENE-UD_887EaVwJZAcy1SzOjuj9OSWMJnVr3ow&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried Workaround 2 and it worked nice for me.&lt;/p&gt;&#xA;" OwnerUserId="26630" LastActivityDate="2021-08-12T13:44:05.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28425" PostTypeId="2" ParentId="28417" CreationDate="2021-08-12T14:21:56.437" Score="1" Body="&lt;p&gt;I am newbie with elementary. Want to try it out on VMWare and stuck with the small screen. Looking at the &amp;quot;Select a Language&amp;quot; page helplessly...&lt;/p&gt;&#xA;&lt;p&gt;It seems slow too...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J7x2h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J7x2h.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT: Found a solution on reddit: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/p2zsss/cannot_install_odin_on_virtualbox_because_of/h8nrthu?utm_source=share&amp;amp;utm_medium=web2x&amp;amp;context=3&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/p2zsss/cannot_install_odin_on_virtualbox_because_of/h8nrthu?utm_source=share&amp;amp;utm_medium=web2x&amp;amp;context=3&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;//&#xA;added a line to the VM file (.vmx), so the first three lines look like this:&lt;/p&gt;&#xA;&lt;p&gt;.encoding = &amp;quot;windows-1252&amp;quot;&#xA;config.version = &amp;quot;8&amp;quot;&#xA;firmware=&amp;quot;efi&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="26643" LastEditorUserId="26643" LastEditDate="2021-08-12T15:01:33.593" LastActivityDate="2021-08-12T15:01:33.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28426" PostTypeId="1" CreationDate="2021-08-12T14:22:18.070" Score="1" ViewCount="50" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/doXhC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/doXhC.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But in my teams application I am able see my video footage&lt;/p&gt;&#xA;" OwnerUserId="26641" LastActivityDate="2021-08-12T14:22:18.070" Title="Camera app showing a blank scree in odin" Tags="|release-odin|camera|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28428" PostTypeId="2" ParentId="28387" CreationDate="2021-08-12T18:50:18.793" Score="1" Body="&lt;p&gt;This question was answered in this post:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28378/almost-no-apps-on-appcenter&quot;&gt;Almost no apps on appcenter&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Eddy now are in AppCenter DON'T INSTALL FROM GITHUB&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I was able to install Eddy from the terminal like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install git&#xA;sudo apt install valac libgranite-dev libpackagekit-glib2-dev libunity-dev&#xA;sudo apt install meson&#xA;git clone https://github.com/donadigo/eddy.git  &#xA;sudo apt install libzeitgeist-2.0-dev&#xA;meson build &amp;amp;&amp;amp; cd build&#xA;meson configure -Dprefix=/usr&#xA;ninja&#xA;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and to run the application:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;com.github.donadigo.eddy&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2021-08-14T17:13:50.120" LastActivityDate="2021-08-14T17:13:50.120" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28429" PostTypeId="2" ParentId="28392" CreationDate="2021-08-12T19:06:53.723" Score="0" Body="&lt;p&gt;This question was answered in this post:&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28378/almost-no-apps-on-appcenter&quot;&gt;Almost no apps on appcenter&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;If you sideload a flatpak from flathub.org you'll automatically add&#xA;their repo, and populate Appcenter a bit more.&lt;/p&gt;&#xA;&lt;p&gt;Other than that it seems AppCenter won't support deb packages anymore.&#xA;So yes, you can still install deb programs via the terminal, but I'm&#xA;afraid you'll then need to manually update them, because appcenter&#xA;won't do it for you.&lt;/p&gt;&#xA;&lt;p&gt;The reasoning for this apparently is that some users found non curated&#xA;apps &amp;quot;ugly&amp;quot; so now they castrated the whole os for it.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Note: You will not immediately see the applications in AppCenter. In my case after installing an app from &lt;a href=&quot;https://flathub.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/&lt;/a&gt; it took a few reboots for  finally show up all apps available. Unfortunately, you will only see Flatpak apps in AppCenter. to install apps from repositories, you will have to use terminal or download Eddy or other application to install .deb&lt;/p&gt;&#xA;&lt;p&gt;If this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2021-08-12T19:27:03.787" LastActivityDate="2021-08-12T19:27:03.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28431" PostTypeId="1" CreationDate="2021-08-12T20:38:08.107" Score="0" ViewCount="266" Body="&lt;p&gt;I downloaded and tried Odin but could not set resolution for my laptop + external monitor correctly.&#xA;Here's the deal:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Laptop display is 4K&lt;/li&gt;&#xA;&lt;li&gt;External monitor is FHD&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;No matter what I tried, I got either:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;external monitor would show grotesquely huge widgets and fonts&lt;/li&gt;&#xA;&lt;li&gt;laptop monitor would show miniscule widgets and fonts&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I was unable to individually set (or scale) the displays to make them look similar.&lt;/p&gt;&#xA;&lt;p&gt;Extremely sorry for saying this but I use other desktop environments for as long as I an remember and this has not been an issue, even with 2 or 3 external monitors, each with different screen resolutions.&lt;/p&gt;&#xA;&lt;p&gt;Why is this so hard?&lt;/p&gt;&#xA;&lt;p&gt;Yes, I can use xrandr (and even arandr) but should I need to for a desktop that is otherwise so awesome? Is the issue in some upstream library?&lt;/p&gt;&#xA;&lt;p&gt;FWIW, KDE/Plasma has never had issues scaling displays individually (Wayland) or setting resolutions individually on X11/Xorg.&lt;/p&gt;&#xA;" OwnerUserId="26655" LastActivityDate="2023-12-31T16:07:41.023" Title="Multiple displays and resolution" Tags="|display|monitors|scaling|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28432" PostTypeId="1" CreationDate="2021-08-12T21:03:33.487" Score="1" ViewCount="106" Body="&lt;p&gt;I really like the OS, but there are a couple things I am missing from other distros.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;How can I get icons in the top tray? I like having my VPN and Syncthing visible and accessible at a glance at the top right.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;How can I enable window preview for apps in the bottom launcher? Especially when I have multiple windows open in Firefox, it is annoying to have to cycle through them.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerDisplayName="user26657" LastActivityDate="2024-01-01T10:01:45.213" Title="New to eOS, couple cutomization questions" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28433" PostTypeId="2" ParentId="28373" CreationDate="2021-08-12T21:04:13.787" Score="1" Body="&lt;p&gt;I solved it.&lt;/p&gt;&#xA;&lt;p&gt;For flatpaks, you need to enable the Home permission in system settings for Firefox.&lt;/p&gt;&#xA;" OwnerDisplayName="user26657" LastActivityDate="2021-08-12T21:04:13.787" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28434" PostTypeId="1" AcceptedAnswerId="28463" CreationDate="2021-08-12T21:14:55.963" Score="0" ViewCount="262" Body="&lt;p&gt;On Hera I had no issues extract either .rar files or .cbr files using Files/Archive Manager.&lt;/p&gt;&#xA;&lt;p&gt;Now on Odin when I try to extact either I get an error saying &amp;quot;An error occured while extracting files. Parsing Filters is unsupported&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I have downloaded Ark from the AppCenter and the same files that fail with Archive Manager will extract fine with Ark...&lt;/p&gt;&#xA;" OwnerUserId="26658" LastActivityDate="2021-08-13T17:47:23.403" Title="Files/Archive Manager application unable to extract .rar files" Tags="|pantheon-files|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28435" PostTypeId="2" ParentId="28418" CreationDate="2021-08-12T23:02:41.143" Score="1" Body="&lt;p&gt;To change your hostname, run the command below.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;hostnamectl set-hostname &amp;quot;hostname&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25833" LastActivityDate="2021-08-12T23:02:41.143" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28436" PostTypeId="1" CreationDate="2021-08-13T01:15:06.247" Score="1" ViewCount="183" Body="&lt;p&gt;I've installed Elementary Odin wanting to give the Elementary OS dark mode a try. I really liked the dark theme but was upset that when I installed a GTK application from APT not Flatpak it gives you a default Elementary light theme. I understand about Flatpak not following the system theme but why not GTK why only for Elementary applications only.&lt;/p&gt;&#xA;&lt;p&gt;I'm not sure if it's a bug and since you'll think if you installed a GTK application from APT will use the system theme. I've found a workaround and installed Pantheon Tweaks (the new Elementary Tweaks they changed the name to not get it confused with the devs at Elementary) and turn on &amp;quot;Force to use dark stylesheet&amp;quot; and it fixed the GTK theme and so far it's using the Elementary Dark theme or close to it. I'm using XFCE's Thunar for example on the theme issue here are the screenshots since I can't upload more than 1 screenshots: &lt;a href=&quot;https://i.stack.imgur.com/gRdme.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/gRdme.jpg&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;So I hope someone in the Elementary Dev will see this and make an update fixing the GTK issue and possiblity fix the Flatpak theme to match with Elementary theme dark and light.&lt;/p&gt;&#xA;&lt;p&gt;Thank you all and I hope this helps :)&lt;/p&gt;&#xA;" OwnerUserId="23169" LastActivityDate="2021-08-13T01:15:06.247" Title="Workaround: How to fix GTK theme issue installed from APT" Tags="|settings|applications|system|apt|gtk|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28438" PostTypeId="2" ParentId="28432" CreationDate="2021-08-13T02:01:07.750" Score="0" Body="&lt;p&gt;The &amp;quot;problem&amp;quot; is that in order for them to appear on the top panel, the application must be made especially for eOS. Dev want everyone to program apps exclusively for eOS...&lt;/p&gt;&#xA;&lt;p&gt;Well...&lt;/p&gt;&#xA;&lt;p&gt;The solution to this is install a third party application.&lt;/p&gt;&#xA;&lt;p&gt;You'll need the following dependencies :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libglib2.0-dev libgranite-dev libindicator3-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libwingpanel-dev indicator-application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;now install this:&#xA;&lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana/blob/master/com.github.lafydev.wingpanel-indicator-ayatana_2.0.7_odin.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Lafydev/wingpanel-indicator-ayatana/blob/master/com.github.lafydev.wingpanel-indicator-ayatana_2.0.7_odin.deb&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;then:&lt;/p&gt;&#xA;&lt;p&gt;Edit the file&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Search the parameter:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;OnlyShowIn= and add &amp;quot;Pantheon&amp;quot; at the end of the line :&#xA;OnlyShowIn=Unity;GNOME;Pantheon;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Save your changes with Ctrl+O then Ctrl+x to exit&lt;/p&gt;&#xA;&lt;p&gt;After do all this, just reboot and enjoy eOS&lt;/p&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Lafydev/wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastEditorUserId="15431" LastEditDate="2021-08-13T23:34:16.903" LastActivityDate="2021-08-13T23:34:16.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28439" PostTypeId="1" CreationDate="2021-08-13T03:34:31.483" Score="1" ViewCount="390" Body="&lt;p&gt;I'm trying to install Elementary OS Odin into a virtual machine with LUKS + LVM partitions set up and the installer doesn't allow me to config the partitions&lt;/p&gt;&#xA;&lt;p&gt;drive setup:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo parted /dev/sda mktable GPT&#xA;sudo parted /dev/sda mkpart fat32 2048s 512MiB # 2048s is the best alignment for my drive&#xA;sudo parted /dev/sda set 1 esp on # flaggin partition for EFI boot&#xA;sudo mkfs.vfat -F32 /dev/sda1&#xA;sudo parted /dev/sda mkpart unformatted 512MiB 100%&#xA;sudo cryptsetup luksFormat --type=luks1 /dev/sda2 # grub doesn't boot luks2 drives&#xA;sudo cryptsetup luksOpen /dev/sda2 mydrive&#xA;sudo dd if=/dev/zero of=/dev/mapper/mydrive bs=8M # Wait till no space left error&#xA;sudo pvcreate /dev/mapper/sda2&#xA;sudo vgcreate elementaryOS /dev/mapper/sda2&#xA;sudo lvcreate --name swap -L2G elementaryOS&#xA;sudo mkswap /dev/mapper/elementaryOS-swap&#xA;sudo lvcreate --name boot -L1G elementaryOS&#xA;sudo mkfs.btrfs /dev/mapper/elementaryOS-boot&#xA;sudo lvcreate --name system -l100%FREE elementaryOS&#xA;sudo mkfs.btrfs /dev/mapper/elementaryOS-system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then I started the installer, which asks me for the password to unencrypt (luksOpen) my drive and nothing happens after it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uXm9a.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uXm9a.png&quot; alt=&quot;installer asking for encrypted disk password&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/lqJHm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lqJHm.png&quot; alt=&quot;installer confirming that the volume was successful unencrypted but no actions at all&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26661" LastActivityDate="2024-03-14T03:08:21.073" Title="Missing LUKS + LVM support for Odin (v6) installer" Tags="|system-installation|release-odin|full-disk-encryption|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28442" PostTypeId="1" CreationDate="2021-08-13T06:47:04.890" Score="0" ViewCount="44" Body="&lt;p&gt;I use an MSI R9 390, the card is famously unoptimized and needs GRUB edits for injection of kernel arguments &lt;code&gt;radeon.cik_support=0 radeon.si_support=0 amdgpu.cik_support=1 amdgpu.si_support=1 amdgpu.dpm=1 amdgpu.dc=1&lt;/code&gt; to work correctly with AMDGPU open source drivers, this worked fine in Beta 1-2, but when clean installing to the newest full release it seems to not change anything after &lt;code&gt;sudo update-grub&lt;/code&gt; since the usual behaviour of the patch being missing takes place (black screen and monitor disconnection after or during password greeting screen)&lt;/p&gt;&#xA;&lt;p&gt;It's been installed on a baremetal GPT layout 256gb SSD, CPU is an FX-8350&lt;/p&gt;&#xA;" OwnerUserId="20690" LastActivityDate="2024-01-03T08:02:45.650" Title="GRUB Editing not working, leaving R9 390 on a dark screen" Tags="|boot|grub|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28443" PostTypeId="1" CreationDate="2021-08-13T07:18:19.897" Score="2" ViewCount="220" Body="&lt;p&gt;When I suspend it wakes up immediately and shows the lock screen. When I log back in the desktop is black and I only see the mouse cursor so I can't do anything. I have to hold down the power button to shutdown and reboot.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;EOS 6 Odin - Linux 5.11.0-25-generic&#xA;Laptop: MSI Creator-17M-A10SD&#xA;CPU: Intel i7-10750H CPU &#xA;GC: NVIDIA® GeForce® GTX® 1660 Ti Mobile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26667" LastEditorUserId="14940" LastEditDate="2021-08-19T17:55:10.810" LastActivityDate="2024-01-07T01:06:00.710" Title="Cannot suspend and desktop disappears after logging back" Tags="|greeter|suspend|release-odin|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28444" PostTypeId="1" AcceptedAnswerId="28471" CreationDate="2021-08-13T09:28:32.847" Score="1" ViewCount="406" Body="&lt;p&gt;Using the Uninstall option in the app list context menu gives errors such as&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Application state not set as installed in AppCenter for package:&#xA;Calculator&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I've also tried &lt;code&gt;apt purge&lt;/code&gt; for &lt;code&gt;pantheon-calculator&lt;/code&gt;, &lt;code&gt;calculus&lt;/code&gt;, and &lt;code&gt;epiphany-browser&lt;/code&gt; none of which worked. Have the package names changed? How is the intended way to delete these apps if there's any?&lt;/p&gt;&#xA;" OwnerUserId="26575" LastEditorUserId="26575" LastEditDate="2021-08-13T10:30:00.477" LastActivityDate="2021-08-13T22:08:34.447" Title="eOS 6 - How to delete Calculator, Tasks, and Web?" Tags="|release-odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28445" PostTypeId="1" CreationDate="2021-08-13T09:28:48.320" Score="1" ViewCount="115" Body="&lt;p&gt;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot; should do the trick but won't work anymore&lt;/p&gt;&#xA;" OwnerUserId="26670" LastActivityDate="2021-08-16T14:01:56.563" Title="GRUB - I want my Odin to boot with text" Tags="|grub|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28446" PostTypeId="1" CreationDate="2021-08-13T11:01:51.787" Score="1" ViewCount="170" Body="&lt;p&gt;I installed elementary OS 6 Odin last night but I have observed that pressing Super + W brings up a very choppy overview of the Windows. Using the Multitasking View (Super + X) also shows the windows in a very choppy way.&lt;/p&gt;&#xA;&lt;p&gt;My laptop specs are&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;CPU: Intel i3-4005U (2 cores with hyperthreading enabled) @ 1.600Ghz&lt;/li&gt;&#xA;&lt;li&gt;GPU: Intel HD 4400 (Haswell-ULT)&lt;/li&gt;&#xA;&lt;li&gt;Resolution: 1366x768&lt;/li&gt;&#xA;&lt;li&gt;Kernel: 5.11.0.25-generic&lt;/li&gt;&#xA;&lt;li&gt;Memory: 8GB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I haven't modified anything system-level and Pantheon isn't exactly a heavy DE. It couldn't be my laptop either as I can run the prior Juno release without lag like this at all. Could be an incompatible kernel? Please help&lt;/p&gt;&#xA;" OwnerUserId="18975" LastActivityDate="2021-08-13T11:01:51.787" Title="Laggy Multitasking View / Window Overview" Tags="|pantheon|graphics|release-odin|multitasking-view|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28447" PostTypeId="2" ParentId="28444" CreationDate="2021-08-13T11:09:27.390" Score="1" Body="&lt;p&gt;Have you tried to remove through AppCenter?&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2021-08-13T11:09:27.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28448" PostTypeId="2" ParentId="28431" CreationDate="2021-08-13T11:20:55.167" Score="0" Body="&lt;p&gt;I have FHD laptop and 2k external monitor, all works fine. Both monitors work in loDPI mode. In your case laptop monitor must be set hiDPI and external to loDPI. It is possible to do in Default settings -&amp;gt;Display settings.&lt;/p&gt;&#xA;&lt;p&gt;So you didn't specify OS version, I'm referring to Hera and up.&lt;/p&gt;&#xA;&lt;p&gt;Lastly eOS does not support fractional scaling. Devs themselves recommended to use xrandr for this.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2021-08-13T11:20:55.167" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28451" PostTypeId="2" ParentId="28417" CreationDate="2021-08-13T12:40:57.687" Score="0" Body="&lt;p&gt;Of course, it should be fixed by developers, but in the meantime, also &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28383/installation-to-virtualbox&quot;&gt;see this tread&lt;/a&gt;. It works.&lt;/p&gt;&#xA;" OwnerUserId="26675" LastActivityDate="2021-08-13T12:40:57.687" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28452" PostTypeId="2" ParentId="12867" CreationDate="2021-08-13T13:50:25.137" Score="1" Body="&lt;p&gt;I use an app called KeyMapper to modify my keys.  In my case, I'm using it to make Mac's COMMAND -&amp;gt; CONTROL and the native PC keyboard ALT -&amp;gt; CONTROL.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/sezanzeb/key-mapper&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/sezanzeb/key-mapper&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25120" LastActivityDate="2021-08-13T13:50:25.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28453" PostTypeId="1" AcceptedAnswerId="28488" CreationDate="2021-08-13T14:35:11.303" Score="0" ViewCount="476" Body="&lt;p&gt;Cannot install Odin because the &lt;kbd&gt;Erase and install&lt;/kbd&gt; is locked even though I selected boot partition, root, swap &amp;amp; home.&lt;/p&gt;&#xA;&lt;p&gt;PS:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I have hera already installed but I marked &lt;kbd&gt;Format&lt;/kbd&gt; for root, boot &amp;amp; home partitions but to no avail.&lt;/li&gt;&#xA;&lt;li&gt;Tried to format the old root partition and it succesed but &lt;kbd&gt;Erase and install&lt;/kbd&gt; is still locked.&lt;/li&gt;&#xA;&lt;li&gt;When I selected Windows OS Recovery partition as my boot partition, the button got enabled. the difference between the EFI partition &amp;amp; the Windows OS Recovery Partition is that EFI is &lt;code&gt;fat32&lt;/code&gt; &amp;amp; only 100MB while the Windows OS Recovery Partition is &lt;code&gt;NTFS&lt;/code&gt; is 500 MB.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="22395" LastEditorUserId="22395" LastEditDate="2021-08-13T15:21:14.417" LastActivityDate="2021-08-14T11:19:48.283" Title="Cannot install Odin because erase button is locked" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28455" PostTypeId="2" ParentId="478" CreationDate="2021-08-13T15:03:49.637" Score="1" Body="&lt;p&gt;&lt;strong&gt;Use a bash script!&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;My script based on kagronick's one is super easy to use, just set a number from 0 to 100:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Usage:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;chmod +x light&#xA;./light 50&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;This sets brightness to 50%&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Find it here:&#xA;&lt;a href=&quot;https://github.com/appvoid/elementary-os-for-newbies/blob/main/light&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/appvoid/elementary-os-for-newbies/blob/main/light&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26680" LastActivityDate="2021-08-13T15:03:49.637" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28456" PostTypeId="1" CreationDate="2021-08-13T15:09:18.343" Score="1" ViewCount="3711" Body="&lt;p&gt;I was installing ElementoryOs on my HP Laptop. One of the most important things of a laptop is carring it arround and the wifi driver isnt working I have tried a LOT of things linux kernel, bcmwl-kernel-source etc and its still not working.&lt;/p&gt;&#xA;&lt;p&gt;When I go to Settings then i go to System then to Firmware I see BCM43142A0&#xA;When I run lspci -vnn | grep Network&#xA;I get 03:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n [14e4:4365] (rev 01)&lt;/p&gt;&#xA;&lt;p&gt;When I use iwconfig&#xA;I get&#xA;lo        no wireless extensions.&lt;/p&gt;&#xA;&lt;p&gt;enp2s0    no wireless extensions.&lt;/p&gt;&#xA;" OwnerUserId="26681" LastActivityDate="2024-01-01T05:04:20.530" Title="elementary OS 6 Odin BCM43142A0 (WIFI) NOT WORKING" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28458" PostTypeId="1" CreationDate="2021-08-13T16:00:15.087" Score="1" ViewCount="62" Body="&lt;p&gt;I made a fresh install of EOS from 5.1 to 6 keeping my home partition. Now I have the problem, that I see an outdated printer in the printers settings that I can't remove.&lt;/p&gt;&#xA;&lt;p&gt;Any idea where this entry might be stored?&lt;/p&gt;&#xA;&lt;p&gt;Thanks, Michael&lt;/p&gt;&#xA;" OwnerUserId="23269" LastActivityDate="2021-08-13T16:00:15.087" Title="EOS 6 old printer cannot be removed" Tags="|settings|printer|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28460" PostTypeId="1" AcceptedAnswerId="28462" CreationDate="2021-08-13T17:24:18.597" Score="1" ViewCount="149" Body="&lt;p&gt;In the newer version of Elementary OS can you do:&#xA;do-release upgrade from the terminal like in Ubuntu or some similiar command&#xA;to upgrade to a newer version of Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="26683" LastActivityDate="2021-08-13T17:30:44.453" Title="In Elementary OS 6.0 upgrade" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28461" PostTypeId="2" ParentId="28445" CreationDate="2021-08-13T17:28:47.350" Score="1" Body="&lt;p&gt;I suspect something is weird about the GRUB that ships with elementary OS. It ignored some of the configuration I tried on it as well, albeit I'm inexperienced with GRUB in general.&lt;/p&gt;&#xA;&lt;p&gt;What worked for me was using &lt;code&gt;boot-repair&lt;/code&gt; to reinstall GRUB. I disabled Secure Boot in the GRUB options, which reinstalled GRUB, and enabled my selections in the GRUB config file.&lt;/p&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2021-08-13T17:28:47.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28462" PostTypeId="2" ParentId="28460" CreationDate="2021-08-13T17:30:44.453" Score="1" Body="&lt;p&gt;Elementary OS 6 has to be installed as a fresh install. No upgrade option from eOS 5 that I am aware of.&lt;/p&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2021-08-13T17:30:44.453" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28463" PostTypeId="2" ParentId="28434" CreationDate="2021-08-13T17:47:23.403" Score="0" Body="&lt;p&gt;This page: &lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=2322776&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=2322776&lt;/a&gt; suggests that this problem may be due to &amp;quot;Unrar&amp;quot; not being installed.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-08-13T17:47:23.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28464" PostTypeId="1" CreationDate="2021-08-13T18:09:12.427" Score="0" ViewCount="75" Body="&lt;p&gt;Does anyone know if or how I can install a VMware client app on my Elementary OS?&lt;/p&gt;&#xA;&lt;p&gt;Many thanks,&lt;/p&gt;&#xA;&lt;p&gt;Shimon.&lt;/p&gt;&#xA;" OwnerUserId="26685" LastActivityDate="2024-01-01T03:07:15.940" Title="Is there an app for the VMware client?" Tags="|install|apps|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28465" PostTypeId="1" AcceptedAnswerId="28467" CreationDate="2021-08-13T18:33:21.297" Score="0" ViewCount="196" Body="&lt;p&gt;I have mandatory needs with onedrive, so it is important that it is compatible, so the question is, if I can download office or even one drive as app and not only on the web?&#xA;I'm tired of windows and the only thing that prevents me from using linux is this question, so I appreciate your attention.&lt;/p&gt;&#xA;" OwnerUserId="26686" LastActivityDate="2021-08-15T03:43:57.013" Title="The Microsoft Suite is supported? or onedrive?" Tags="|applications|software-installation|software-recommendation|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28466" PostTypeId="2" ParentId="25773" CreationDate="2021-08-13T19:09:39.967" Score="0" Body="&lt;p&gt;Thanks for the reminder @Jeff. Just installed eOS 6 in a VM, here is what is packed with flatpak out off box.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Calculator&lt;/li&gt;&#xA;&lt;li&gt;Camera&lt;/li&gt;&#xA;&lt;li&gt;Screenshot&lt;/li&gt;&#xA;&lt;li&gt;Tasks (A new app, I believe it is already in App Center for eOS 5.&lt;/li&gt;&#xA;&lt;li&gt;Mesa&lt;/li&gt;&#xA;&lt;li&gt;GNOME Web&lt;/li&gt;&#xA;&lt;li&gt;Evince&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I would prefer none to be, but none of them are really critical, to me anyway.&lt;/p&gt;&#xA;" OwnerUserId="19334" LastEditorUserId="19334" LastEditDate="2021-08-15T15:20:39.647" LastActivityDate="2021-08-15T15:20:39.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28467" PostTypeId="2" ParentId="28465" CreationDate="2021-08-13T19:34:29.033" Score="1" Body="&lt;p&gt;The question should be more like, &amp;quot;Does Microsoft OneDrive support Linux?&amp;quot;. The answer to that is no, Microsoft OneDrive does not officially provide Linux clients. You may access OneDrive from your internet browser to view and upload files.&lt;/p&gt;&#xA;&lt;p&gt;Beyond that there are some open source projects you may have already seen from  a Google search to give you a similar experience to Windows version of OneDrive on Linux. This thread suggestions some options: &lt;a href=&quot;https://techcommunity.microsoft.com/t5/office-365/onedrive-on-linux/m-p/1318644&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://techcommunity.microsoft.com/t5/office-365/onedrive-on-linux/m-p/1318644&lt;/a&gt; mentions this project: &lt;a href=&quot;https://github.com/abraunegg/onedrive/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/abraunegg/onedrive/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2021-08-13T19:34:29.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28468" PostTypeId="2" ParentId="28464" CreationDate="2021-08-13T19:43:51.797" Score="0" Body="&lt;p&gt;Depending on what you mean, you can install &lt;a href=&quot;https://my.vmware.com/en/web/vmware/downloads/info/slug/desktop_end_user_computing/vmware_horizon_clients/horizon_8&quot; rel=&quot;nofollow noreferrer&quot;&gt;VMWare Horizon Client&lt;/a&gt; which lets you connect to an existing virtual machine that's already remotely hosted.&lt;/p&gt;&#xA;&lt;p&gt;If you want to set up a new virtual machine to run on your computer, VMWare offers a variety of products for this, including a free one for non-commerial use &lt;a href=&quot;https://www.vmware.com/products/workstation-player/workstation-player-evaluation.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;VMWare Workstation Player&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;As far as I know, the vast majority of VMWare's applications are designed to run on Linux natively.&lt;/p&gt;&#xA;" OwnerUserId="14064" LastActivityDate="2021-08-13T19:43:51.797" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28469" PostTypeId="1" CreationDate="2021-08-13T20:05:27.773" Score="0" ViewCount="1330" Body="&lt;p&gt;I'm using Elementary OS 5 as main OS is there any way I can upgrade it to Elementary OS 6 without losing all of my data and configurations etc etc&lt;/p&gt;&#xA;" OwnerUserId="26688" LastActivityDate="2024-01-01T08:08:35.997" Title="How to Upgrade From Elementary OS 5 to Elementary OS 6" Tags="|system-installation|release-juno|updates|kernel|laptop|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28470" PostTypeId="2" ParentId="28456" CreationDate="2021-08-13T20:35:29.623" Score="0" Body="&lt;p&gt;Have you tried following the relevant part of this guide for the relevant version?&#xA;&lt;a href=&quot;https://itsfoss.com/fix-no-wireless-network-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/fix-no-wireless-network-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26164" LastActivityDate="2021-08-13T20:35:29.623" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28471" PostTypeId="2" ParentId="28444" CreationDate="2021-08-13T22:08:34.447" Score="2" Body="&lt;p&gt;You can remove them with&lt;/p&gt;&#xA;&lt;p&gt;flatpak remove io.elementary.camera io.elementary.calculator org.gnome.Epiphany&lt;/p&gt;&#xA;&lt;p&gt;I don't know why these applications do not show as installed in the appcenter. This might be a bug.&lt;/p&gt;&#xA;" OwnerUserId="26526" LastActivityDate="2021-08-13T22:08:34.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28472" PostTypeId="2" ParentId="28469" CreationDate="2021-08-13T22:28:51.730" Score="0" Body="&lt;p&gt;There is no way to upgrade. If you have a separate partition for /home filesystem then you could do it. if not it is not possible.&lt;/p&gt;&#xA;&lt;p&gt;Even i am in same scenario and took backup of my data installed &amp;quot; POP OS &amp;quot; afresh. it is feature rich than Elementary OS 6 (Odin) and gives upgrade option every time there is a new OS Release.&lt;/p&gt;&#xA;&lt;p&gt;Abandon it for the people who developed it. I hope most people shift away from this distribution. This is huge limitation for users.&lt;/p&gt;&#xA;" OwnerUserId="7678" LastActivityDate="2021-08-13T22:28:51.730" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28474" PostTypeId="1" CreationDate="2021-08-14T00:17:56.760" Score="0" ViewCount="729" Body="&lt;p&gt;Can elementary OS 6 be installed under Parallels on macOS 11 for a iMac M1 system.&lt;/p&gt;&#xA;&lt;p&gt;There is a ARM Ubuntu, so I hope eOS has ARM version also.&lt;/p&gt;&#xA;&lt;p&gt;I've successfully run Win10/11 ARM on my M1 under Parallels.&lt;/p&gt;&#xA;" OwnerUserId="26693" LastActivityDate="2024-01-10T03:01:20.160" Title="Can elementary OS 6 be installed under Parallels on macOS 11 for a iMac M1 system?" Tags="|release-odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28475" PostTypeId="1" CreationDate="2021-08-14T00:20:35.453" Score="3" ViewCount="2608" Body="&lt;p&gt;I installed elementary OS 6.0 Odin (final release 2021-08-10).&lt;/p&gt;&#xA;&lt;p&gt;I was finally able to get FlatPak apps to install. However, none use the elementary OS Dark Theme. I checked FlatPak and the elementary theme is installed. How do you get Odin to use the Dark Theme system wide for all FlatPak apps?&lt;/p&gt;&#xA;" OwnerUserId="12058" LastActivityDate="2021-10-13T08:27:19.203" Title="How to get elementaryOS Odin 6.0 FlatPak Apps to Use the system Dark Theme?" Tags="|themes|release-odin|flatpak|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28476" PostTypeId="2" ParentId="28338" CreationDate="2021-08-14T03:34:47.943" Score="0" Body="&lt;p&gt;I have the same issue with the cutoff window as the OP, except I am installing to Windows 10 host. I had an issue with the installation of Elementary OS 6 for the same reason. The right side and bottom portion of the installer screens were cutoff. That area of the screen has buttons for back, submit, cancel.&lt;/p&gt;&#xA;&lt;p&gt;I resolved this by making to selection to erase/complete install, then using the tab key twice followed by the enter key. Apparently this sequence of keystrokes allowed me to initiate the full installation script successfully.&lt;/p&gt;&#xA;" OwnerUserId="26690" LastEditorUserId="26690" LastEditDate="2021-08-14T18:13:46.943" LastActivityDate="2021-08-14T18:13:46.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28477" PostTypeId="1" CreationDate="2021-08-14T04:15:23.890" Score="0" ViewCount="286" Body="&lt;p&gt;I tried login my email accounts in the Mail app in EOS Odin. But was unable to sign in to any of the accounts I use. I tried Zoho Mail and Gmail.&lt;/p&gt;&#xA;" OwnerUserId="23403" LastActivityDate="2022-01-13T10:07:40.873" Title="Mail app is not working in Odin" Tags="|pantheon-mail|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28478" PostTypeId="1" CreationDate="2021-08-14T06:18:03.843" Score="0" ViewCount="125" Body="&lt;p&gt;Is there a way to customize the date time format in the top task bar? Cannot locate the settings with dconf-editor.&lt;/p&gt;&#xA;" OwnerUserId="26697" LastActivityDate="2024-01-01T13:03:45.483" Title="Change date and time format" Tags="|settings|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28479" PostTypeId="2" ParentId="28478" CreationDate="2021-08-14T06:28:11.393" Score="0" Body="&lt;p&gt;The Date &amp;amp; Time panel in the System Settings app will let you change between 12 hour and 24 hour time format and show or hide the date, day of the week and seconds. If that is all you need.&lt;/p&gt;&#xA;" OwnerUserId="26699" LastActivityDate="2021-08-14T06:28:11.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28480" PostTypeId="2" ParentId="28465" CreationDate="2021-08-14T06:31:56.617" Score="0" Body="&lt;p&gt;There are some recent videos on YouTube that talk about OneDrive on Linux. &lt;a href=&quot;https://youtu.be/4mA3_ZX3SIw&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/4mA3_ZX3SIw&lt;/a&gt;&#xA;Just search Linux OneDrive. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="26698" LastEditorUserId="26698" LastEditDate="2021-08-14T06:38:25.043" LastActivityDate="2021-08-14T06:38:25.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28482" PostTypeId="1" CreationDate="2021-08-14T06:46:38.027" Score="0" ViewCount="82" Body="&lt;p&gt;i have a medion akoya e3223, i am running elementary os 5.1 on it&#xA;just bought elementary os 6.0 but i can not install it, because  i can not enter boot menu&lt;/p&gt;&#xA;&lt;p&gt;if i press f2 as per manufactures manual, then  nothing happens.&lt;/p&gt;&#xA;&lt;p&gt;when i press fn+f2 i enter elementary os settings, but arrow buttons fail to work here&lt;/p&gt;&#xA;&lt;p&gt;this happens with and without bootable usb-stick inserted&lt;/p&gt;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;&lt;p&gt;Jan&lt;/p&gt;&#xA;&lt;p&gt;remark: the quality checks applied on the post, did not make it more read able&lt;/p&gt;&#xA;" OwnerUserId="23512" LastActivityDate="2024-01-01T23:03:55.457" Title="can not update from 5.1 to 6.0" Tags="|updates|uefi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28483" PostTypeId="2" ParentId="28482" CreationDate="2021-08-14T07:41:16.660" Score="0" Body="&lt;p&gt;If I remember correctly, the f8 takes you to the boot menu and f11 is the recovery mode which wipes the hard drive. Have you googled your system. Most of the information is in German.&lt;/p&gt;&#xA;" OwnerUserId="26698" LastEditorUserId="26698" LastEditDate="2021-08-14T07:47:21.467" LastActivityDate="2021-08-14T07:47:21.467" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28484" PostTypeId="1" CreationDate="2021-08-14T08:07:36.243" Score="1" ViewCount="668" Body="&lt;p&gt;I wish somebody smarter than me would publish a guide on how to upgrade to elementary OS 6.  I know it's save data and install.  Here's what I'd like to accomplish:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I have multiple user accounts per computer.  I'd like to seamlessly transfer to the new install.&lt;/li&gt;&#xA;&lt;li&gt;I have account settings for email clients, chat clients, and calendar clients that I want to seamlessly transfer.&lt;/li&gt;&#xA;&lt;li&gt;I've installed Steam.  I'd like to seamlessly transfer games and game settings w/o having to reinstall.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Tell me what folders to save, and how to insert them in the new install.&lt;/p&gt;&#xA;&lt;p&gt;I really like elementaryOS.  I've bought it and I've encouraged others to adopt it.  But this, now that I'm fully invested in the OS, this inability to upgrade like other Ubuntu-based distros, or Windows, or Mac, just might be a deal breaker.  I don't want it to be, so any good gauge would be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2024-01-09T23:02:35.273" Title="Need an upgrade guide to go from 5.1 to 6.0" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28486" PostTypeId="2" ParentId="28423" CreationDate="2021-08-14T08:14:19.100" Score="1" Body="&lt;p&gt;According to Google's &lt;a href=&quot;https://developers.google.com/calendar/caldav/v2/guide&quot; rel=&quot;nofollow noreferrer&quot;&gt;developer documentation&lt;/a&gt; page, that url you're using is the correct one. Although they also mention this one:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;https://apidata.googleusercontent.com/caldav/v2/calid/user&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;And as far as I can tell, the &lt;code&gt;calid&lt;/code&gt; is your email address with the &amp;quot;@&amp;quot; replaced with a &amp;quot;%40&amp;quot;, like &lt;code&gt;john%40gmail.com&lt;/code&gt;. But I haven't been able to get it to work with these settings either.&lt;/p&gt;&#xA;" OwnerUserId="100" LastActivityDate="2021-08-14T08:14:19.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28488" PostTypeId="2" ParentId="28453" CreationDate="2021-08-14T09:16:10.450" Score="0" Body="&lt;p&gt;It turns out that the EFI partition was 100MB and this was the reason that the button was locked. the solution becomes simply to increasing the partition size to 512MiB or 550MB and it should work. notice that you will need to shift all your partitions using gparted (if you do not have a nearby empty space).&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-08-14T09:16:10.450" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28490" PostTypeId="2" ParentId="21935" CreationDate="2021-08-14T10:22:26.467" Score="1" Body="&lt;p&gt;If you are starting Plank from a terminal with &lt;code&gt;plank &amp;amp;&lt;/code&gt; and you use the X to close the terminal, it kills the process you backgrounded in the terminal.  Type &lt;code&gt;exit&lt;/code&gt; at the shell or use CTRL-D instead and it &lt;em&gt;should&lt;/em&gt; leave your bg jobs running. Most DE's these days support ATL+F2 to open a run dialog. You can run plank from there with &lt;code&gt;plank&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26700" LastActivityDate="2021-08-14T10:22:26.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28492" PostTypeId="2" ParentId="28453" CreationDate="2021-08-14T11:19:48.283" Score="0" Body="&lt;p&gt;you have to select an uefi partition,&#xA;or disable first uefi on BIOS.&lt;/p&gt;&#xA;" OwnerUserId="26701" LastActivityDate="2021-08-14T11:19:48.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28493" PostTypeId="1" CreationDate="2021-08-14T11:25:13.090" Score="0" ViewCount="41" Body="&lt;p&gt;I have win-11&#xA;and I have installed 10s of different Linux versions (debian, ubuntu, xubuntu, zorinOs, ......)&#xA;all without any problems, But the new Version of &amp;quot;elementary os 6 odin&amp;quot; today failed twice.&#xA;(after I had my partition ready for installing)&#xA;it was something: installation not possible, try it again, or restart....&lt;/p&gt;&#xA;&lt;p&gt;before on Bios I have disabled UEFI&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://ibb.co/jGhF063&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ibb.co/jGhF063&lt;/a&gt;   (german installation)&lt;/p&gt;&#xA;" OwnerUserId="26701" LastActivityDate="2024-01-03T09:07:00.913" Title="Installation aborted twice" Tags="|settings|boot|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28494" PostTypeId="2" ParentId="28387" CreationDate="2021-08-14T13:33:53.590" Score="1" Body="&lt;p&gt;Somebody posted this in a different thread already, and it worked for me:&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;.deb packages can be installed with this command in terminal:&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;$ sudo dpkg -i *name.of.package.deb*&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26702" LastActivityDate="2021-08-14T13:33:53.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28497" PostTypeId="2" ParentId="4799" CreationDate="2021-08-14T15:38:21.850" Score="0" Body="&lt;p&gt;now 5 years later, any update ?&#xA;just installed elementary 6.0 on my laptop.&#xA;the rotation bug is fixed ! great.&#xA;when i convert laptop to tablet, the keyboard still remains active.&#xA;a shortcut to disable keyboard would be sufficient.&lt;/p&gt;&#xA;" OwnerUserId="23512" LastActivityDate="2021-08-14T15:38:21.850" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28498" PostTypeId="1" AcceptedAnswerId="28499" CreationDate="2021-08-14T16:31:28.553" Score="0" ViewCount="592" Body="&lt;p&gt;I just got elementary OS 6 yesterday and wanted to install Mailspring and Atom. I did so via snap.&lt;/p&gt;&#xA;&lt;p&gt;In the applications menu both do not show and I have to open them via &lt;code&gt;snap run program_name&lt;/code&gt;. When they are open, the icons show in the dock on the bottom but I have no option of keeping them in there. Also, the icons of these programs look kind of blurry.&lt;/p&gt;&#xA;&lt;p&gt;With Firefox that I got via apt-get the issue does not occur.&lt;/p&gt;&#xA;&lt;p&gt;Can anyone help? I would like to have them in there as it is more convenient and both are programs that I use regularly.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;&lt;p&gt;Antonella&lt;/p&gt;&#xA;" OwnerUserId="26705" LastActivityDate="2021-08-14T17:25:50.213" Title="Cannot add programs installed via snap to Plank dock menu" Tags="|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28499" PostTypeId="2" ParentId="28498" CreationDate="2021-08-14T17:25:50.213" Score="0" Body="&lt;p&gt;in the AppCenter there is an application called AppEditor, with it you can create and modify shortcuts in the application menu, there is also another called alacarte that also allows you to do the same.&lt;/p&gt;&#xA;&lt;p&gt;To install alacarte you can do it with the terminal using this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install alacarte&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If this solves your question don't forget to mark as solved&lt;/p&gt;&#xA;" OwnerUserId="15431" LastActivityDate="2021-08-14T17:25:50.213" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28500" PostTypeId="1" AcceptedAnswerId="28525" CreationDate="2021-08-14T17:45:50.460" Score="2" ViewCount="3211" Body="&lt;p&gt;I will ask 2 questions this time.&lt;br /&gt;&#xA;&lt;strong&gt;First&lt;/strong&gt;&lt;br /&gt;&#xA;There are tons of questions here about tray icons in elementary but none of them work in my fresh Elementary 6.&lt;br /&gt;&#xA;One of them was like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt update&#xA;sudo apt install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But it didn't work. I had error like this:&lt;br /&gt;&#xA;&lt;code&gt;The following packages have unmet dependencies: wingpanel-indicator-ayatana : Depends: libwingpanel-2.0-0 but it is not installable E: Unable to correct problems, you have held broken packages. &lt;/code&gt;&lt;br /&gt;&#xA;Then tried &lt;a href=&quot;https://github.com/donadigo/wingpanel-indicator-namarupa&quot; rel=&quot;nofollow noreferrer&quot;&gt;Namarupa&lt;/a&gt; but it didn't work too.&lt;/p&gt;&#xA;&lt;p&gt;How can I fix it on Elementary 6?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Second&lt;/strong&gt;&lt;br /&gt;&#xA;I don't like double-click in file manager of pantheon. In Elementary 5(Settings&amp;gt;Tweaks),there was a option for it but in Elementary 6 I couldn't find it.&lt;br /&gt;&#xA;How can I enable single-click?&lt;/p&gt;&#xA;" OwnerUserId="26707" LastActivityDate="2023-02-14T15:44:52.373" Title="Tray icon support in Elementary 6 Odin &amp; Single click in file manager" Tags="|release-odin|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28501" PostTypeId="1" CreationDate="2021-08-14T20:12:35.757" Score="0" ViewCount="267" Body="&lt;p&gt;Completely clean install of Odin. Wifi worked, but figured if there is an update, should get it. Updated bcmwl-kernel-source. Wifi no longer visible&#xA;I tried un-installing bcmwl, no change.&lt;/p&gt;&#xA;" OwnerUserId="26255" LastActivityDate="2024-01-04T17:04:30.540" Title="updated bcmwl-kernel-source : wifi no longer exists (wired network doesnt even show up)" Tags="|wifi|laptop|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28502" PostTypeId="1" CreationDate="2021-08-14T20:48:41.297" Score="0" ViewCount="46" Body="&lt;ul&gt;&#xA;&lt;li&gt;Hello, just visiting.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Based on this: '&lt;a href=&quot;https://www.howtogeek.com/748310/whats-new-in-elementary-os-6-odin&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.howtogeek.com/748310/whats-new-in-elementary-os-6-odin&lt;/a&gt;', I'm considering EOS. The type of menu system is a large factor in my decision.&lt;/p&gt;&#xA;&lt;p&gt;I've taken a tour of sorts and read about EOS and Pantheon and Vala, etc., but I've not seen menu(s). I'm currently running a Mint Guest (Win10 Host) and find Cinnamon Menu lacking.&lt;/p&gt;&#xA;" OwnerUserId="26708" LastEditorUserId="26708" LastEditDate="2021-08-15T00:32:53.830" LastActivityDate="2021-08-15T00:32:53.830" Title="What system menus are available?" Tags="|menu|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28503" PostTypeId="1" CreationDate="2021-08-14T20:56:02.780" Score="0" ViewCount="187" Body="&lt;p&gt;Am I able to update to the latest version of elementaryOS without having to reinstall and lose all of my data? If so, what do I need to do?&lt;/p&gt;&#xA;" OwnerUserId="26709" LastActivityDate="2021-08-14T20:56:02.780" Title="Can I update without losing anything?" Tags="|elementary-project|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28504" PostTypeId="1" CreationDate="2021-08-14T21:48:37.050" Score="1" ViewCount="315" Body="&lt;p&gt;I've confirmed this behavior installing from both the final Odin .iso, and upgrading via meisenzahl's upgrade script:&lt;/p&gt;&#xA;&lt;p&gt;With nvidia-340 installed on my MBP5,3 (with an Nvidia GeForce 9400M &amp;amp; a GeForce 9600M GT), the graphical login screen gets a black (not grey) background and lacks any of the network/shutdown/restart icons in the upper right. When one logs in with user/pass, the screen goes blank, sometimes switching to a text-only display with one to three lines that are generally to quick to catch, and then cycles back to the black-backgrounded graphical login screen. It does not go to a desktop.&lt;/p&gt;&#xA;&lt;p&gt;Ctrl-alt-F3'ing to log into a CLI shows that permissions on .Xauthority are fine, and reconfiguring or reinstalling lightdm has no effect on the above behavior. Removing nvidia-340 &amp;amp; its associated files (whether or not one sudo apt autoremoves at the same time) does allow one to log in to the GUI, but apps such as Firefox get hung trying to render any new pages, for example (I guess they need that graphics acceleration they're not getting). Epiphany seems to work fine (I'm composing this on it). Nvidia-340 and its OpenCL component both list in fact to be 340, and correctly for Ubuntu 20.04. Nvidia-settings, interestingly, seems to be 470 (for Ubuntu 20.04).&lt;/p&gt;&#xA;&lt;p&gt;Also, when trying to reinstall Nvidia-340 from either the AppCenter or from Terminal, the install script exits with an error 10, and tells me that nvidia is broken or incompletely installed. Neither dpkg-reconfigure or reinstalling fix this, though remove and remove --purge (along with sudo apt autoremove) work fine to continue to use the GUI un-accelerated.&lt;/p&gt;&#xA;&lt;p&gt;Is this something a new/tweaked version of lightdm might address, to play nice with Nvidia-340, or are we stuck waiting (possibly forever) for Nvidia to update/tweak Nvidia-340?&lt;/p&gt;&#xA;&lt;p&gt;Lastly, before you tell me to upgrade firmware, I'm running the latest that the fruit company bothered to make for their MBP5,3 way back in 2009. I've got elementary installed under OpenCore with &amp;quot;Custom&amp;quot; instead of &amp;quot;Create&amp;quot; in UpdateSMBIOSMode &amp;amp; &amp;quot;true&amp;quot; rather than &amp;quot;false&amp;quot; in CustomSMBIOSGuid, so elementary has direct access to the firmware of the system it's running on, not the firmware of a newer model that OpenCore emulates for macOS. That means elementary's running on the bare metal of the system it would be, if it booted up on its own under grub.&#xA;This means that while nvidia-340 under Hera (for Ubuntu 18.04) worked fine, nvidia-340 or how it interfaces with lightdm in Odin (for Ubuntu 20.04) is currently broken, at least on my MBP5,3 with abysmally old &amp;amp; non-upgradable firmware.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions or plan on a roadmap to address this? If I go back to Hera, how long with my system enjoy support?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="26710" LastEditorUserId="26710" LastEditDate="2021-08-14T21:53:55.220" LastActivityDate="2022-01-29T04:50:53.837" Title="Nvidia-340 causes login loop on Odin final on MBP5,3" Tags="|greeter|release-odin|macintosh|nvidia-driver|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28505" PostTypeId="2" ParentId="28423" CreationDate="2021-08-14T23:07:17.837" Score="2" Body="&lt;p&gt;Using the old URL format (&lt;code&gt;https://www.google.com/calendar/dav/your-email-address/user/&lt;/code&gt;, from &lt;a href=&quot;https://help.ubuntu.com/community/GoogleCalendarWithEvolution&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;), I was able to connect and Online Accounts could retrieve the list of calendars.&lt;/p&gt;&#xA;&lt;p&gt;Calendar was open and it crahed with this message,&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rwr26.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rwr26.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But then I opened it again and it worked properly.&lt;/p&gt;&#xA;&lt;p&gt;After reboot, Wingpanel always crahes after clicking the date unless I open Calendar before and wait for all calendars to load.&lt;/p&gt;&#xA;&lt;p&gt;Tasks don't seem to be working, though. Trying to add task to the newly-added account results in a &lt;code&gt;Password not found&lt;/code&gt; error.&lt;/p&gt;&#xA;&lt;p&gt;Honestly, I'm a bit disappointed in all this. It is a PITA to set up and even after setup it doesn't seem to really work as expected.&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2021-08-14T23:07:17.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28509" PostTypeId="2" ParentId="28465" CreationDate="2021-08-15T03:43:57.013" Score="0" Body="&lt;p&gt;I use a program called ExpanDrive, which maps to my google drives, my DropBox, and my OneDrives.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-08-15T03:43:57.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28510" PostTypeId="2" ParentId="28385" CreationDate="2021-08-15T08:01:07.677" Score="1" Body="&lt;p&gt;I was facing the same issue with VMWare Workstation 16.1.x till I reach this post and took the advice posted previously of Colin Dean regarding EFI Mode&#xA;The issue that I wasn't able to reach this option through the VMWare GUI, so after a quick google search, all the needed to solve the issue is the below :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Create your Elementary OS&lt;/li&gt;&#xA;&lt;li&gt;No need to start it yet&lt;/li&gt;&#xA;&lt;li&gt;Go to the machine .VMX file&lt;/li&gt;&#xA;&lt;li&gt;add the below in the second line of the VMX file&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;firmware=&amp;quot;efi&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Save the .VMX file&lt;/li&gt;&#xA;&lt;li&gt;Boot your machine&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;This solved the issue for me, please try it and let me know :)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lH3lN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lH3lN.png&quot; alt=&quot;VMXFileFirmwareEFI&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26716" LastActivityDate="2021-08-15T08:01:07.677" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28511" PostTypeId="1" CreationDate="2021-08-15T10:01:01.813" Score="1" ViewCount="406" Body="&lt;p&gt;Virtualbox installation doesn't show a proper sized screen, so no controls are available to continue&lt;/p&gt;&#xA;" OwnerUserId="26718" LastActivityDate="2021-09-16T06:01:40.250" Title="Virtualbox installation screen size too small" Tags="|system-installation|virtualbox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28512" PostTypeId="2" ParentId="28423" CreationDate="2021-08-15T10:02:12.177" Score="0" Body="&lt;p&gt;Maybe you are just concerned with understand more about the Online Accounts tools, but in case your concern is to make the calendar work, my answer would go as below:&lt;/p&gt;&#xA;&lt;p&gt;I was having problems synchronizing with my Google Calendar, but a guy on Reddit helped me solve it. When we are at the Odin Elementary Calendar we tend to click on the configuration button and then click on online accounts configuration to synchronize things, but in that way, I couldn't do the synchronization.&lt;/p&gt;&#xA;&lt;p&gt;So, a guy on Reddit showed me how we actually can go into &amp;quot;add new calendar&amp;quot; and there will be a &amp;quot;Google&amp;quot; option, which should work. Here is the screenshot link he sent to me showing it:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Kqk7A.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/Kqk7A.jpg&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I hope this addresses your concerns. I wasn't able to make Google Calendar work with CalDav too, only with Vivaldi Calendar, but as I was having time configuration problems with it (Vivaldi Calendar), I just did what I did with Google configuration.&lt;/p&gt;&#xA;&lt;p&gt;Source:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/p3ltml/how_to_add_google_calendar_to_the_calendar_app/h8rxz9w/?context=3&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/p3ltml/how_to_add_google_calendar_to_the_calendar_app/h8rxz9w/?context=3&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26713" LastEditorUserId="26713" LastEditDate="2021-08-15T10:08:05.277" LastActivityDate="2021-08-15T10:08:05.277" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28514" PostTypeId="1" CreationDate="2021-08-15T12:10:44.497" Score="1" ViewCount="1342" Body="&lt;p&gt;The problem is as follows: I have Elementary OS 5.1.7. Hera and consider upgrading to OS6. However, so far I have only found information that a direct in-place upgrade is not possible, only a complete reinstallation is planned. Is that true or is there a possibility to upgrade to OS6 in-place? Thank you ronny&lt;/p&gt;&#xA;" OwnerUserId="26528" LastActivityDate="2022-01-13T08:00:50.120" Title="Upgrade latest Hera to Odin" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28515" PostTypeId="1" AcceptedAnswerId="28517" CreationDate="2021-08-15T13:05:31.940" Score="0" ViewCount="1517" Body="&lt;p&gt;have a device of configuration: i3, 4GB RAM, 1TB HDD, Dual Booted to Windows 10 and Elementary 5.1.7 with 125 GB for Elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;The sole reason to have Dual Boot on such weak and old device was that it was becoming difficult for the device to handle Windows 10 with a web-browser and a video conferencing app together and work without hanging for hours. So to ease my day to day work, I switched to Elementary OS, with no knowledge of Linux at all. I just knew how to make an ISO file to boot able media and install it.&lt;/p&gt;&#xA;&lt;p&gt;So I have been using it for months, and now I wish to update to Elementary OS 6, so my basic question is how to update to V6 from V5.1.7 without opting for a fresh/clean start, losing all apps and data. I checked the official website it says nothing for those who already are on the OS, and in the System Settings app, it shows no components is available to update.&lt;/p&gt;&#xA;&lt;p&gt;Please note I am a 15 year old student with least knowledge of Linux, so please explain all steps, all commands you may refer to. I know it may be a lot extra effort to explain in such manner, and it would really nice of all of you guys to help me out.&lt;/p&gt;&#xA;&lt;p&gt;Thanks &amp;amp; Regards,&#xA;Animish Yadav&lt;/p&gt;&#xA;" OwnerUserId="26717" LastActivityDate="2021-08-17T16:32:51.120" Title="How to update from Elementary OS 5.1.7 to Elementary 6" Tags="|updates|release-odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28516" PostTypeId="1" CreationDate="2021-08-15T15:26:20.633" Score="0" ViewCount="118" Body="&lt;p&gt;I have elementary os 6 installed on my laptop and when I open the display section in the settings to change it to &lt;code&gt;1920x1080&lt;/code&gt; the option is not there&lt;/p&gt;&#xA;" OwnerUserId="26719" LastActivityDate="2024-01-05T20:03:25.380" Title="No option set display to 1920x1080 in the settings" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28517" PostTypeId="2" ParentId="28515" CreationDate="2021-08-15T15:32:01.963" Score="0" Body="&lt;p&gt;Did you try this &lt;a href=&quot;https://github.com/meisenzahl/upgrade&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/meisenzahl/upgrade&lt;/a&gt;&#xA;you will need to build it from source instructions in the repo's readme&lt;/p&gt;&#xA;" OwnerUserId="26719" LastEditorUserId="26719" LastEditDate="2021-08-17T16:32:51.120" LastActivityDate="2021-08-17T16:32:51.120" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28518" PostTypeId="1" CreationDate="2021-08-15T16:08:06.013" Score="0" ViewCount="171" Body="&lt;p&gt;how it's going on?&lt;/p&gt;&#xA;&lt;p&gt;I installed LibreOffice via synaptic and apt since I had problems with saving documents in the Flathub version. That being said, AppCenter doesn't show my new Libre Office install, so, will App Center handle its updates?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="26713" LastActivityDate="2024-01-15T00:03:35.437" Title="Installed LibreOffice via apt, will AppCenter update it?" Tags="|appcenter|release-odin|libreoffice|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28519" PostTypeId="1" AcceptedAnswerId="28536" CreationDate="2021-08-15T16:18:05.607" Score="0" ViewCount="132" Body="&lt;p&gt;I have added a few input methods in System Settings -&amp;gt; Keyboard -&amp;gt; Input Methods. After that, I would expect the iBus daemon to be auto-started upon boot or login, however I still need to manually start it. I've been doing so via the button in System Settings -&amp;gt; Keyboard -&amp;gt; Input Methods, but there should be a better way?&lt;/p&gt;&#xA;&lt;p&gt;I found another answer (&lt;a href=&quot;https://elementaryos.stackexchange.com/a/5313/15156&quot;&gt;https://elementaryos.stackexchange.com/a/5313/15156&lt;/a&gt;) which mentioned adding &lt;code&gt;ibus-daemon -drx&lt;/code&gt; as a custom command in Settings &amp;gt; Applications &amp;gt; Startup. Is this still the best solution in Odin?&lt;/p&gt;&#xA;" OwnerUserId="15156" LastActivityDate="2021-08-16T08:50:05.613" Title="How to start ibus daemon on login in elementaryOS Odin?" Tags="|ibus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28520" PostTypeId="2" ParentId="28493" CreationDate="2021-08-15T20:03:33.197" Score="0" Body="&lt;p&gt;can you show us the output of the terminal content when click on the &amp;quot;Details&amp;quot; button once you reached that state?&lt;/p&gt;&#xA;&lt;p&gt;I had the same issue and at the end it turned out, that I had to format my whole disk from a DOS partition table to a GPT partition table.&#xA;In my case this was no problem as I was OK with deleting all data on that HD.&lt;/p&gt;&#xA;&lt;p&gt;Cheers, Michael&lt;/p&gt;&#xA;" OwnerUserId="23269" LastActivityDate="2021-08-15T20:03:33.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28521" PostTypeId="1" CreationDate="2021-08-15T20:20:16.743" Score="1" ViewCount="367" Body="&lt;p&gt;I've just downloaded the new Elementary Os software version, and the app center is requesting to upgrade libgranite5, but it keeps going through this error:&lt;/p&gt;&#xA;&lt;p&gt;Error while installing package: trying to overwrite '/usr/share/metainfo/granite.appdata.xml', which is also in the package libgranite-common 6.1.0+r2071+pkg119~ubuntu6.1&lt;/p&gt;&#xA;&lt;p&gt;Is it possible to fix this? I'm a new user of Elementary Os and Linux, so I don't know much about those kind of stuff...&lt;/p&gt;&#xA;" OwnerUserId="26720" LastActivityDate="2023-01-12T21:00:10.070" Title="Why can't I upgrade libgranite5 in the AppCenter?" Tags="|appcenter|release-odin|error|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28523" PostTypeId="2" ParentId="28515" CreationDate="2021-08-15T22:31:02.017" Score="-1" Body="&lt;p&gt;That is, Abdallah Mohammad the creators of elementary.io are deceiving us, because in at least 3 publications I have read that it is possible to upgrade from 5.1.7 Hera to 6.0 Odin from the application center. So, the question is how to allow us to update because it doesn't give me the option to do so yet. Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="26724" LastActivityDate="2021-08-15T22:31:02.017" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28524" PostTypeId="2" ParentId="28442" CreationDate="2021-08-15T22:47:04.780" Score="0" Body="&lt;p&gt;Managed to fix it by updating grub via the usual GRUB 2 method  &lt;code&gt;grub-mkconfig -o /boot/grub/grub.cfg&lt;/code&gt;, caught me off-guard because even during the beta the normal &amp;quot;&lt;code&gt;sudo update-grub&lt;/code&gt;&amp;quot; worked.&lt;/p&gt;&#xA;" OwnerUserId="20690" LastActivityDate="2021-08-15T22:47:04.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28525" PostTypeId="2" ParentId="28500" CreationDate="2021-08-16T00:09:48.077" Score="3" Body="&lt;p&gt;I fixed it this way...&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1º Install dependencies:&lt;/strong&gt;&#xA;$ sudo apt-get install libglib2.0-dev libgranite-dev libindicator3-dev libwingpanel-dev indicator-application&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;2º Download:&lt;/strong&gt;&#xA;$ wget -c &lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana/raw/master/com.github.lafydev.wingpanel-indicator-ayatana_2.0.8_odin.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Lafydev/wingpanel-indicator-ayatana/raw/master/com.github.lafydev.wingpanel-indicator-ayatana_2.0.8_odin.deb&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3º Install:&lt;/strong&gt;&#xA;$ sudo dpkg -i ./com.github.lafydev.wingpanel*.deb&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;4º Edit file:&lt;/strong&gt;&#xA;edit file 'indicator-application.desktop' and then add &amp;quot;Pantheon;&amp;quot; in &amp;quot;OnlyShowIn=Unity;GNOME;&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;$ sudo nano /etc/xdg/autostart/indicator-application.desktop&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;5º Reboot.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Source:&lt;/strong&gt;&#xA;&lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Lafydev/wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;About the &lt;strong&gt;single-click&lt;/strong&gt; i don't know how to fix this :/ the pantheon-tweaks don't show this option...&lt;/p&gt;&#xA;" OwnerUserId="26510" LastEditorUserId="27334" LastEditDate="2022-03-27T11:58:00.157" LastActivityDate="2022-03-27T11:58:00.157" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28526" PostTypeId="1" CreationDate="2021-08-16T00:38:41.037" Score="0" ViewCount="440" Body="&lt;p&gt;I currently duel boot another LInux Distro with Windows 10. I want to replace the existing Linux distro with elementary OS 6.  Elementary OS doesn't appear to see the duel boot setup.  What's the best way to install elementary OS over the existing Linux distro and maintain my Windows 10 duel boot.  Below is a screenshot of my current partitions.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3sz6d.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3sz6d.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24683" LastActivityDate="2024-01-03T10:08:46.080" Title="Install Elementary OS on existing duel boot system" Tags="|dual-boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28527" PostTypeId="2" ParentId="28475" CreationDate="2021-08-16T02:41:44.640" Score="1" Body="&lt;p&gt;You can force to use dark stylesheet using Pantheon Tweaks which will create new local settings under &lt;code&gt;~/.config/gtk-3.0/settings.ini&lt;/code&gt; with content below.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Settings]&#xA;gtk-application-prefer-dark-theme=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26725" LastActivityDate="2021-08-16T02:41:44.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28528" PostTypeId="2" ParentId="28443" CreationDate="2021-08-16T03:19:35.640" Score="0" Body="&lt;p&gt;I had the same issue with Odin on my Macbook Pro 2010 6,2 with screen locking. I read Elementary OS uses the Xorg modesetting driver by default out of the box.  I had to generate a xorg.conf, modify it to use the nouveau driver only, not i915 (removed entries).  After this I was able to lock and unlock without the black screen and cursor problem. This worked with the standard Odin wallpaper and no wallpaper specified.&lt;/p&gt;&#xA;&lt;p&gt;I haven't gotten suspend working yet though, that has resulted in a video memory corrupted background image so far, that requires a lightdm restart or reboot.  So suspend is currently deactivated for me. I may end up trying to make just the i915 driver work, although that hasn't been easy so far.&lt;/p&gt;&#xA;" OwnerUserId="26726" LastActivityDate="2021-08-16T03:19:35.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28529" PostTypeId="2" ParentId="28475" CreationDate="2021-08-16T03:53:59.000" Score="2" Body="&lt;p&gt;I also needed to install a dark theme to flatpak with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install flathub org.gtk.Gtk3theme.Adwaita-dark&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then using&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to get the application ID...  Then the following command to apply the theme to the application ID... For example with LibreOffice&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak override --user --env=GTK_THEME=Adwaita-dark org.libreoffice.LibreOffice&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That command worked great in Hera, but it seems to be hit or miss in Odin.  It will hold for a while... even occasionally after a reboot, but ultimately it seems to lose the setting and default back to the flatpaks &amp;quot;light&amp;quot; setting.&lt;/p&gt;&#xA;&lt;p&gt;Adding &lt;code&gt;GTK_THEME=Adwaita-dark&lt;/code&gt; as an Environment Variable in Flatseal seems to yeild the same results.  Works for a while but in Odin, it seems to disappear.  In Hera it appears permanent.&lt;/p&gt;&#xA;" OwnerUserId="26727" LastEditorUserId="19079" LastEditDate="2021-10-13T08:27:19.203" LastActivityDate="2021-10-13T08:27:19.203" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28530" PostTypeId="2" ParentId="28526" CreationDate="2021-08-16T04:44:01.043" Score="0" Body="&lt;p&gt;TL;DR Backup your important files, then install the OS to your custom partitions. If the elementary OS install wizard cannot configure the boot loader correctly, try installing and  running &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-Repair&lt;/a&gt; from a live boot session.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;From your screenshot, it looks like the former Linux install was likely on /dev/sda6, and your PC was previously prepared with a UEFI partition, but it might not be in use right now (it doesn't have the 'boot' flag toggled.)&lt;/p&gt;&#xA;&lt;p&gt;Before proceeding, make sure that you back up anything important on your hard drive, and confirm whether or not your device supports UEFI and has it enabled. Also, please note that since you're using MBR with an extended partition, I'm not sure whether any of the following I have to say applies or not. As of late, I always use GPT where I can instead of MBR.&lt;/p&gt;&#xA;&lt;p&gt;When booting from the elementary OS 6 disc, I think you'll want to perform a custom disk install and target /dev/sda6 at the / mount point. If you don't target a specific partition for /boot /swap or /home, then I believe it'll just install everything into one simple partition just fine.&lt;/p&gt;&#xA;&lt;p&gt;/dev/sda5 can remain mounted to /boot/efi, but you may need to toggle the 'boot' flag on it before starting through the elementary OS installer.&lt;/p&gt;&#xA;&lt;p&gt;For my own Dell laptop reinstall from elementary OS 5 to 6—also a dual-boot system with Windows 10—I custom configured /boot, /, /home, and /swap partitions and ensure that I linked them appropriately during the installation wizard.&lt;/p&gt;&#xA;&lt;p&gt;The installer appeared to finish copying over all of the OS contents to the okay, but it failed to write the boot loader correctly. I had UEFI enabled and Safe Boot disabled. Post OS install and a reboot confirming that the boot loader didn't write correctly, I ran &lt;a href=&quot;https://help.ubuntu.com/community/Boot-Repair&quot; rel=&quot;nofollow noreferrer&quot;&gt;Boot-Repair&lt;/a&gt; from another live-boot disk, fixed it up automatically, and rebooted, and now everything works fine.&lt;/p&gt;&#xA;" OwnerUserId="20135" LastActivityDate="2021-08-16T04:44:01.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28532" PostTypeId="2" ParentId="28514" CreationDate="2021-08-16T05:42:47.740" Score="1" Body="&lt;p&gt;I had the exact same question, and my question received a few answers, so you may want to read it once, I think.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28515/how-to-update-from-elementary-os-5-1-7-to-elementary-6&quot;&gt;How to update from Elementary OS 5.1.7 to Elementary 6&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have also created a discussion on GitHub: &lt;a href=&quot;https://github.com/elementary/os/discussions/535&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/discussions/535&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;TL;DR&lt;/p&gt;&#xA;&lt;p&gt;Till now, I have seen no options for in-place update like Windows and MacOS.&lt;/p&gt;&#xA;&lt;p&gt;Sorry for disappointing, but I am also disappointed by this news that there are no in-place updates till now.&lt;/p&gt;&#xA;" OwnerUserId="26717" LastActivityDate="2021-08-16T05:42:47.740" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28533" PostTypeId="1" CreationDate="2021-08-16T08:08:40.710" Score="0" ViewCount="223" Body="&lt;p&gt;i tried installing odin on my Dell XPS13 9343 (2015 model), but could not manage to get wifi working. After installation, I installed bcmw-kernel-source from USB stick, but still no wifi available. When I try this command:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;lspci -knn | grep Net -A3; rfkill list&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I get this output:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;02:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries&#xA;BCM4352 802.11ac Wireless Network Adapter [14e4:43b1] (rev 03)&#xA;Subsystem: Dell BCM4352 802.11ac Wireless Network Adapter [1028:0019]&#xA;Kernel modules: bcma&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;any suggestions?&lt;/p&gt;&#xA;" OwnerUserId="30" LastActivityDate="2024-01-06T23:02:15.380" Title="Wifi not working on Odin - Dell 9343 XPS13" Tags="|wifi|drivers|release-odin|dell|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28534" PostTypeId="2" ParentId="28533" CreationDate="2021-08-16T08:17:24.500" Score="0" Body="&lt;p&gt;solved! found the solution over here:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/1603#issue-965454894&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/1603#issue-965454894&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="30" LastActivityDate="2021-08-16T08:17:24.500" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28535" PostTypeId="2" ParentId="19102" CreationDate="2021-08-16T08:42:21.030" Score="0" Body="&lt;p&gt;Im on Odin and tried to transfer files from my phone but unsuccessfully, just installed blueman and it work perfectly now ty&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-08-16T08:42:21.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28536" PostTypeId="2" ParentId="28519" CreationDate="2021-08-16T08:50:05.613" Score="1" Body="&lt;p&gt;in Applications/start (my os isn't in english but this is the middle button),click add and write in personalised command ibus-daemon (im on odin)&lt;a href=&quot;https://i.stack.imgur.com/n3nfG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/n3nfG.png&quot; alt=&quot;ibus-daemon&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-08-16T08:50:05.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28537" PostTypeId="2" ParentId="28477" CreationDate="2021-08-16T09:12:13.547" Score="1" Body="&lt;p&gt;gmail works, i have 2 accounts on with odin.&#xA;what password are you typing for the login info? your gmail acc or the one google give to access mail client?&lt;/p&gt;&#xA;" OwnerUserId="26361" LastActivityDate="2021-08-16T09:12:13.547" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28538" PostTypeId="2" ParentId="28223" CreationDate="2021-08-16T10:42:00.523" Score="0" Body="&lt;p&gt;Also had big issues using hybrid graphics mode on a HP Zbook with Intel Integrated graphics as well as and AMD Radeon Pro WX 3200 graphics card.&lt;/p&gt;&#xA;&lt;p&gt;blank screen when booting up live iso as well as after installing Elementary OS 6 Odin.&#xA;Has to use nomodeset as you to get it working.&lt;/p&gt;&#xA;&lt;p&gt;Tried going to AMD to get the latest graphics drivers but they do not support the kernel version that Elementary is shipped with (5.11.x).&#xA;Downgraded to kernel 5.4.0 and all issues I was experiencing has gone away.&lt;/p&gt;&#xA;" OwnerUserId="26634" LastActivityDate="2021-08-16T10:42:00.523" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28539" PostTypeId="1" CreationDate="2021-08-16T10:52:14.193" Score="0" ViewCount="117" Body="&lt;p&gt;I have a Samsung Book S with a NVMe SSD, during installation the drive isn't recognized by Elementary OS Odin, I've already disabled Secure Boot Control e Fast BIOS Mode but nothing change,&#xA;any ideas?&lt;/p&gt;&#xA;&lt;p&gt;Edit: keyboard and touchpad also not working during installation and during the live tryout&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&lt;p&gt;M.&lt;/p&gt;&#xA;" OwnerUserId="26733" LastActivityDate="2021-08-16T10:52:14.193" Title="Can't install Elementary OS Odin on a Samsung Book S with NVMe SSD" Tags="|install|ssd|secure-boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28541" PostTypeId="2" ParentId="28511" CreationDate="2021-08-16T11:07:58.537" Score="0" Body="&lt;p&gt;Absolutely the same with VMWare. Seems that installer sets 800x600 resolution in virtual environment.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/QkMlS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QkMlS.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26737" LastActivityDate="2021-08-16T11:07:58.537" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28542" PostTypeId="1" CreationDate="2021-08-16T11:08:11.353" Score="0" ViewCount="55" Body="&lt;p&gt;Sorry maybe I am stupid but I don´t know how to select several files in File Manager or several mails in Pantheon Mail&lt;/p&gt;&#xA;" OwnerUserId="23047" LastActivityDate="2024-01-03T20:05:15.560" Title="Select several items" Tags="|pantheon-files|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28544" PostTypeId="1" CreationDate="2021-08-16T16:34:15.527" Score="1" ViewCount="14" Body="&lt;p&gt;I want to set an alias so that I can swiftly log in to one of my workstations. For example, I must enter&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ssh root@c1232-node1.example.com&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;to log in to one of my machines. Sometimes, the hostname could be &lt;code&gt;c1232-node2&lt;/code&gt; or &lt;code&gt;c1232-node3&lt;/code&gt;, but the domain name would always be &lt;em&gt;example.com&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I want to add the alias permanently in my &lt;code&gt;.zshrc&lt;/code&gt; file so that I need not set it every time I open the terminal.&lt;/p&gt;&#xA;&lt;p&gt;I did my research, and I was successful using a function such as below:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ssh_node() { ssh root@&amp;quot;$1&amp;quot;.example.com; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But when I add this function into my &lt;code&gt;.zshrc&lt;/code&gt; and run the &lt;code&gt;source&lt;/code&gt; command on it, it complains and doesn't accept the function.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance for the help!&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2023-05-08T23:03:50.417" Title="How to write an alias to accept variables" Tags="|bash|script|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28545" PostTypeId="2" ParentId="28544" CreationDate="2021-08-16T16:48:35.830" Score="1" Body="&lt;p&gt;So dumb of me. I achieved my goal by adding this line to the &lt;code&gt;.zshrc&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cluster() { ssh root@&amp;quot;$1&amp;quot;.example.com; }&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then did a&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;source .zshrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Running &lt;code&gt;cluster c1232-node3&lt;/code&gt; executes &lt;code&gt;ssh root@c1232-node3.example.com&lt;/code&gt;. Mission complete!&lt;/p&gt;&#xA;" OwnerUserId="4973" LastActivityDate="2021-08-16T16:48:35.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28546" PostTypeId="2" ParentId="28542" CreationDate="2021-08-16T16:55:04.577" Score="0" Body="&lt;p&gt;In Files, there are several ways to do this.  Assuming you are using the default grid view you can:&lt;/p&gt;&#xA;&lt;p&gt;With the mouse&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Select each item by clicking on the tick emblem that appears when you hover over it or&lt;/li&gt;&#xA;&lt;li&gt;Hold down the &lt;code&gt;&amp;lt;Ctrl&amp;gt;&lt;/code&gt; key and click anywhere on each item you want to select or&lt;/li&gt;&#xA;&lt;li&gt;Hold down the &lt;code&gt;&amp;lt;Shift&amp;gt;&lt;/code&gt; key and click anywhere on the first and last item you want to select.  All items in a linear sequence between these two items will also be selected or&lt;/li&gt;&#xA;&lt;li&gt;Press and hold down the primary button over whitespace and drag the pointer to create a selection rectangle (rubberband). Any item this includes will be selected.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;With the keyboard alone you can&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;With the arrow keys. move the cursor to the first item to select. Hold down the &lt;code&gt;&amp;lt;Shift&amp;gt;&lt;/code&gt; key and move the cursor to the last item to select - all items in between in a linear sequence will be selected or&lt;/li&gt;&#xA;&lt;li&gt;Move the cursor to the first item to selected. Hold down the &lt;code&gt;&amp;lt;Ctrl&amp;gt;&lt;/code&gt; and &lt;code&gt;&amp;lt;Alt&amp;gt;&lt;/code&gt; keys. Move the cursor to the next item to select. Press &lt;code&gt;+&lt;/code&gt; or &lt;code&gt;=&lt;/code&gt; to select that item.  You can also deselect items in the same way by pressing the &lt;code&gt;-&lt;/code&gt; key. Or&lt;/li&gt;&#xA;&lt;li&gt;You can select all items with the shortcut &lt;code&gt;&amp;lt;Ctrl&amp;gt;A&lt;/code&gt; or&lt;/li&gt;&#xA;&lt;li&gt;You can invert any existing selection with the shortcut &lt;code&gt;&amp;lt;Ctrl&amp;gt;&amp;lt;Shift&amp;gt;A&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;These methods work pretty much the same in the other views except for rubberbanding you click on the filename or any other column (not the icon) to commence.&lt;/p&gt;&#xA;&lt;p&gt;I do not know about Mail - I do not use it but some of these methods might work.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-08-16T16:55:04.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28547" PostTypeId="1" CreationDate="2021-08-16T18:21:27.173" Score="2" ViewCount="1532" Body="&lt;br&gt;&#xA;Hope you are doing well.&#xA;I recently shift from ubuntu to ele.os[odin].&#xA;I can't found the option to  activate  double click.&#xA;&lt;p&gt;What I tried till now :&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;NO option in Pantheon tweaks&lt;/li&gt;&#xA;&lt;li&gt;tried gsetting commands also like:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set io.elementary.files.preferences single-click true&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any suggestion will be really helpful&lt;a href=&quot;https://i.stack.imgur.com/jwarO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jwarO.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26742" LastActivityDate="2022-12-27T12:57:26.617" Title="Double click option can't find in elementary-os odin" Tags="|release-odin|" AnswerCount="6" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28548" PostTypeId="2" ParentId="27828" CreationDate="2021-08-16T18:21:40.043" Score="0" Body="&lt;p&gt;Same issue here, really frustrating that there are no work around or solutions for Icloud users with gnome/evolution mail servers.&lt;/p&gt;&#xA;&lt;p&gt;no problem with the caldev or other twofactor systems of other mail providers but @icloud.com&lt;/p&gt;&#xA;" OwnerUserId="26743" LastActivityDate="2021-08-16T18:21:40.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28550" PostTypeId="2" ParentId="28501" CreationDate="2021-08-17T01:52:18.593" Score="0" Body="&lt;p&gt;Try the Linux Kernel Headers install process outlined on Github / elementary&#xA;/ appcenter: &lt;a href=&quot;https://github.com/elementary/appcenter/issues/1603#issue-965454894&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/1603#issue-965454894&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Edit: this process worked for me until restarting the computer. On restart wi-fi is no longer visible in network settings.&lt;/p&gt;&#xA;" OwnerUserId="26745" LastEditorUserId="26745" LastEditDate="2021-08-17T09:13:05.437" LastActivityDate="2021-08-17T09:13:05.437" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28551" PostTypeId="2" ParentId="28547" CreationDate="2021-08-17T05:17:01.870" Score="1" Body="&lt;p&gt;Double clicking to open folders has been disabled. There is now only the so-called „hybrid way:“ single click to open folders, double click to open files. There is no setting to change it.&lt;/p&gt;&#xA;" OwnerUserId="26747" LastActivityDate="2021-08-17T05:17:01.870" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28552" PostTypeId="2" ParentId="28511" CreationDate="2021-08-17T05:30:14.930" Score="2" Body="&lt;p&gt;Checking the &amp;quot;Enable EFI&amp;quot; under System / Motherboard resolved it for me.&lt;/p&gt;&#xA;&lt;p&gt;From the better boot experience I am going to be checking this box on all future Linux builds.&lt;/p&gt;&#xA;" OwnerUserId="26731" LastActivityDate="2021-08-17T05:30:14.930" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28553" PostTypeId="1" CreationDate="2021-08-17T06:23:14.650" Score="0" ViewCount="32" Body="&lt;p&gt;I have a desktop PC currently running Windows 11 Beta, but previously was running Windows 10 Pro. It is not my primary PC (I have several other laptops for that), it is more my tinkering PC. I need to better understand multiple flavours of Linux for employment and personal reasons. I have a couple of Raspberry Pi's running a couple of different Linux distros (Ubuntu Server and Desktop), but I would also like to learn a Linux version such as Elementary on x86/x64 chipset. However, I don't want to lose the Windows installation, in case I ever need it, which is why I don't really want to dual boot it.&lt;/p&gt;&#xA;&lt;p&gt;So I am wanted to convert the existing Windows installation into a VM running under Elementary OS. Any suggestions? Or I being too ambitious?&lt;/p&gt;&#xA;" OwnerUserId="26748" LastActivityDate="2021-09-16T09:07:35.700" Title="Can you move an existing Windows install to run as a VM under Elementary OS (i.e. Elementary becomes new Host OS)" Tags="|system-installation|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28554" PostTypeId="2" ParentId="28553" CreationDate="2021-08-17T08:15:23.803" Score="1" Body="&lt;p&gt;Yes, you can take a currently-functional Windows installation and convert it to a VirtualBox VM (and probably other VMs) relatively painlessly ... but it'll be done initially via Windows then later on elementary OS (or any other OS, really).&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The tool you'll need is &lt;a href=&quot;https://docs.microsoft.com/en-us/sysinternals/downloads/disk2vhd&quot; rel=&quot;nofollow noreferrer&quot;&gt;disk2vhd&lt;/a&gt;. Be sure to get it &lt;em&gt;only&lt;/em&gt; from Microsoft as there are bad actors around who have their own version of this utility. When making the disk image, be sure to include &lt;em&gt;all&lt;/em&gt; partitions, otherwise the resulting file will not boot.&lt;/li&gt;&#xA;&lt;li&gt;Once you've created the VHD, copy the (large) file to a computer that has VirtualBox installed, and run this command in the terminal:&#xA;&lt;pre&gt;&lt;code&gt;VBoxManage clonehd &amp;lt;filename&amp;gt;.vhdx &amp;lt;filename&amp;gt;.vdi --format VDI&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Now that the file is in a format that VirtualBox can use, create a new Windows VM. When the wizard asks you about the storage device, choose the &lt;code&gt;.vdi&lt;/code&gt; file you just created.&lt;/li&gt;&#xA;&lt;li&gt;Configure the rest of the VM as you would like, with the appropriate amount of CPU and memory resources. Be sure to check &amp;quot;Enable EFI&amp;quot;.&lt;/li&gt;&#xA;&lt;li&gt;Boot the VM and install the VirtualBox extensions&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;This will give you a bit-for-bit copy of the Windows machine, including any licenses that may be active.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-17T08:15:23.803" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28555" PostTypeId="1" CreationDate="2021-08-17T08:45:34.610" Score="0" ViewCount="312" Body="&lt;p&gt;Good day mates,&#xA;I'm a new user to Linux and recently installed Elementary OS on 2014 machine Asus eeebook x205ta.&#xA;After instalation everything worked well except for no sound.&#xA;I tried all this commands listed on forums and also youtube, but no avail.&#xA;I tried fiddling around with Alsamixer and pulse audio too.&#xA;I'm getting two audio outputs analog / multimedia but still I don't have any sound.&#xA;I'm ready to provide more information, kindly assist me.&lt;/p&gt;&#xA;" OwnerUserId="26749" LastActivityDate="2021-09-12T11:39:31.503" Title="Elementary OS, No sound. Tried all possible troubleshooting" Tags="|sound|audio|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28556" PostTypeId="1" CreationDate="2021-08-17T08:55:50.383" Score="0" ViewCount="124" Body="&lt;p&gt;the newest Version of Elementary is running on my Pavilion dv6 (HP) Notebook).Connected with an USB3 Port is the USB3 Docking Station from HP, which is not recognized. Unter Win10 Prof it is recognized and work as it should. What can I do to work the docking station under Elementary? On HP-sites there's no driver for any linux system.&#xA;Thanks a lot.&lt;/p&gt;&#xA;" OwnerUserId="26750" LastActivityDate="2024-01-04T16:05:55.680" Title="HP USB 3 Docking Station" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28559" PostTypeId="2" ParentId="28556" CreationDate="2021-08-17T11:45:04.567" Score="0" Body="&lt;p&gt;I tested different docks from HP and Lenovo in my previous job, but only on Windows. Nevertheless, I know that many dock's drivers embed DisplayLink drivers. As there are drivers for Ubuntu, maybe you could try ; here is a link to download these drivers : &lt;a href=&quot;https://www.synaptics.com/products/displaylink-graphics/downloads/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.synaptics.com/products/displaylink-graphics/downloads/ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25966" LastActivityDate="2021-08-17T11:45:04.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28562" PostTypeId="1" CreationDate="2021-08-17T17:50:18.157" Score="0" ViewCount="1469" Body="&lt;p&gt;Trying to remote from windows to the linux box.&#xA;After entering username and password the rdp session disconnects and throws me out back to windows&lt;/p&gt;&#xA;" OwnerUserId="26758" LastActivityDate="2024-01-05T01:04:30.497" Title="how to remote desktop from windows using rdp" Tags="|system|greeter|rdp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28564" PostTypeId="2" ParentId="28562" CreationDate="2021-08-17T20:48:48.390" Score="0" Body="&lt;p&gt;Are you using the out-of-the-box configuration, or did you install and configure a RDP-compatible service, like xRDP?&lt;/p&gt;&#xA;&lt;p&gt;RDP is a Microsoft protocol and isn't enabled on most (any?) Linux distributions that I'm aware of by default. If you would like to enable your Linux GUI desktop with access through RDP, I suggest following &lt;a href=&quot;https://www.ubuntupit.com/how-to-install-and-use-xrdp-server-remote-desktop-on-linux-system/&quot; rel=&quot;nofollow noreferrer&quot;&gt;a guide like this one&lt;/a&gt; starting at Step 2. Or, you could try a separate remote desktop program like &lt;a href=&quot;https://knowledgebase.nomachine.com/DT11R00174#2.2&quot; rel=&quot;nofollow noreferrer&quot;&gt;NoMachine&lt;/a&gt;. It's proprietary, but I think it works great if you really need it... fast performance, reliable, and easy to use!&lt;/p&gt;&#xA;&lt;p&gt;I can't in good consciousness mention remote access to a Linux box without also asking, do you really need to interact with the GUI desktop? If simply having access to the command line is enough, then Windows 10, macOS, and Linux OS are already pre-loaded with a SSH client that you can use to connect.&lt;/p&gt;&#xA;&lt;p&gt;And, if you want to get fancier and really leverage the 'nix experience, you could use a MS Windows implementation of an x11 client to connect. Check out &lt;a href=&quot;http://xpra.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;xpra&lt;/a&gt; for a project that's been around for a long time, or &lt;a href=&quot;https://mobaxterm.mobatek.net/&quot; rel=&quot;nofollow noreferrer&quot;&gt;MobaXterm&lt;/a&gt; for a complete suite of remote access tools for Windows that can even run as a portable application without any installation.&lt;/p&gt;&#xA;" OwnerUserId="20135" LastActivityDate="2021-08-17T20:48:48.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28565" PostTypeId="2" ParentId="21276" CreationDate="2021-08-18T04:22:40.643" Score="1" Body="&lt;p&gt;If the browser was installed via the AppCenter then by default you got a Flatpak version of Firefox. For most purposes Flatpak apps are fine, but for extremely large applications like Firefox it maybe useful to install it as a system-level program instead:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Go to the AppCenter and uninstall Firefox&lt;/li&gt;&#xA;&lt;li&gt;Open Terminal and run this command:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install firefox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25192" LastActivityDate="2021-08-18T04:22:40.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28566" PostTypeId="2" ParentId="15464" CreationDate="2021-08-18T14:04:00.827" Score="0" Body="&lt;p&gt;Go to System Settings, Select the power options under the Hardware Category.&lt;/p&gt;&#xA;&lt;p&gt;There you can choose the screen time-out duration and the duration when your laptops suspends in Elementary OS terms when plugged in or on battery.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/tH0LN.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/tH0LN.png&quot; alt=&quot;Screenshot of Power options in System Settings on Elementary OS&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&#xA;Animish&lt;/p&gt;&#xA;" OwnerUserId="26717" LastActivityDate="2021-08-18T14:04:00.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28567" PostTypeId="2" ParentId="28516" CreationDate="2021-08-18T14:16:29.747" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/WsDhr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WsDhr.png&quot; alt=&quot;Screenshot of Elementary OS 6&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Hello Abdallah,&lt;/p&gt;&#xA;&lt;p&gt;Please visit Display option in Hardware Category in System Settings. There you will see a &amp;quot;Gear&amp;quot; symbol in top right, on opening which you can see options related to Resolution and Screen Rotation.&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&#xA;Animish Yadav&lt;/p&gt;&#xA;" OwnerUserId="26717" LastActivityDate="2021-08-18T14:16:29.747" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28569" PostTypeId="2" ParentId="25428" CreationDate="2021-08-18T17:06:23.023" Score="0" Body="&lt;p&gt;same issue on a HP Mini-210-1010 trying to use Elementary OS-6 live booted from USB thumb drive. gets all the way through and they hangs at &amp;quot;try Demo Mode&amp;quot; after  to edit. not a black screen, just hangs. MX Linux, XUbuntu and Linux Mint all boot up for a live demo.&lt;/p&gt;&#xA;" OwnerUserId="26590" LastActivityDate="2021-08-18T17:06:23.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28570" PostTypeId="1" CreationDate="2021-08-18T21:14:17.527" Score="0" ViewCount="115" Body="&lt;p&gt;I downloaded elementaryos-6.0-stable.20210810.iso and wrote it out to an USB stick using Etcher. The resulting installer boots fine on a HP EliteDesk 8300 in UEFI mode, but fails to boot on 2 different Dell Optiplex 7020 machines. Tried both UEFI mode and Legacy mode, they both fail to boot. This is what is shown on the screen after selecting the UEFI USB disk to boot from:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Failed to open \EFI\BOOT\? - Not Found&#xA;Failed to load image \EFI\BOOT\?: Not Found&#xA;start_image() returned Not Found&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;The question marks are actually shown in inverse.&lt;/strong&gt;&#xA;This is shown for about 1.5 seconds, then the firmware boot menu comes back again.&lt;/p&gt;&#xA;&lt;p&gt;If I try to boot the USB in Legacy mode, then a one liner says no bootable device, and press a key to reboot.&lt;/p&gt;&#xA;&lt;p&gt;So it seems that whatever format this installer is using, cannot be digested by the Dell Optiples 7020 firmware (latest BIOS version, A18). As such, it is very likely to behave the same way on its sister models, the Optiplex 9020 and 3020 too. Would be nice if somebody having access to those models could confirm that.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions on what to try?&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, how do I build a different installer that is likely to work with this fussy firmware? The Hera installer USB boots fine on these machines.&lt;/p&gt;&#xA;" OwnerUserId="24531" LastActivityDate="2024-01-06T14:01:10.143" Title="elementaryos-6.0-stable.20210810.iso USB fails to boot on Dell Optiplex 7020" Tags="|system-installation|boot|usb-drive|uefi|dell|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28571" PostTypeId="2" ParentId="28570" CreationDate="2021-08-18T21:42:36.553" Score="0" Body="&lt;p&gt;Workaround #1 advised on &lt;a href=&quot;https://github.com/elementary/triage/issues/74&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74&lt;/a&gt; allowed me to boot the installer on the Optiplex 7020 machines.&lt;/p&gt;&#xA;" OwnerUserId="24531" LastActivityDate="2021-08-18T21:42:36.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28572" PostTypeId="2" ParentId="21123" CreationDate="2021-08-18T23:56:45.777" Score="0" Body="&lt;p&gt;It just happened to me on Odin yesterday. (it used to happen from time to time on Hera).&#xA;So that bug is still around.&lt;/p&gt;&#xA;" OwnerUserId="26770" LastActivityDate="2021-08-18T23:56:45.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28574" PostTypeId="2" ParentId="28474" CreationDate="2021-08-19T05:29:53.817" Score="0" Body="&lt;p&gt;I don't see why it wouldn't, since Parallels is virtualizing the x686 chip. Why not try it out and let us know? Especially since Parallels 17 just said it would.  Bless your heart, Maccer.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-08-19T05:29:53.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28575" PostTypeId="1" AcceptedAnswerId="28772" CreationDate="2021-08-19T06:10:25.863" Score="1" ViewCount="142" Body="&lt;p&gt;Last weekend I happily upgraded (reinstalled) to Elementary 6. I have two issues (one is often discussed... can't get the system tray icons for owncloud etc working... will get that working in the end as I did with previous versions of Elementary).&lt;/p&gt;&#xA;&lt;p&gt;The other one is that I'm a happy user of mc (for years and year) within the terminal. Mc uses F5 to copy files. The terminal in 6 wants to do a refresh of the terminal. Can I disable the refresh function? Now I have to use an extra button the let mc copy a file and my muscle memory doesn't understand that... I couldn't find any settings for the terminal window that allow me to disable the F5-refresh. Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="26773" LastActivityDate="2021-10-27T05:35:29.467" Title="Can I disable the F5 refresh for terminal windows?" Tags="|pantheon-terminal|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28576" PostTypeId="2" ParentId="22822" CreationDate="2021-08-19T12:07:37.350" Score="1" Body="&lt;p&gt;Here's another approach:&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;&lt;a href=&quot;https://discovery.endeavouros.com/applications/uniform-theme-and-fonts-for-qt-apps-in-gtk-environments/2021/05/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Uniform theme and fonts for Qt apps in GTK environments&lt;/a&gt;&amp;quot; provided by the EndeavourOS-guys (recommended for fonts only in this case):&#xA;Instead of the the given arch-linux install cmd ('pacman -S &lt;em&gt;pkg-name&lt;/em&gt;') you have to replace it with your normal install cmd ('apt install &lt;em&gt;pkg-name&lt;/em&gt;'), and then follow the given instructions for user-space-setup (quickest).&lt;/p&gt;&#xA;" OwnerUserId="26775" LastEditorUserId="26775" LastEditDate="2021-08-19T12:16:00.073" LastActivityDate="2021-08-19T12:16:00.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28577" PostTypeId="2" ParentId="28475" CreationDate="2021-08-19T12:32:07.333" Score="-1" Body="&lt;p&gt;Here's another approach:&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;&lt;a href=&quot;https://discovery.endeavouros.com/applications/uniform-theme-and-fonts-for-qt-apps-in-gtk-environments/2021/05/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Uniform theme and fonts for Qt apps in GTK environments&lt;/a&gt;&amp;quot; provided by the EndeavourOS-guys:&#xA;Instead of the the given arch-linux install cmd ('pacman -S &lt;em&gt;pkg-name&lt;/em&gt;') you have to replace it with your normal install cmd ('apt install &lt;em&gt;pkg-name&lt;/em&gt;'), and then follow the given instructions for user-space-setup (quickest).&lt;/p&gt;&#xA;" OwnerUserId="26775" LastActivityDate="2021-08-19T12:32:07.333" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28579" PostTypeId="1" CreationDate="2021-08-19T14:48:13.960" Score="0" ViewCount="66" Body="&lt;p&gt;I've been using elementary os 6. Whenever I try to change the desktop wallpaper, the system hangs indefinitely.&lt;/p&gt;&#xA;&lt;p&gt;Sometimes the wallpaper changes abruptly, other times it hangs for so long that I have to force restart the system.&lt;/p&gt;&#xA;&lt;p&gt;Today I encountered the same issue while changing the wallpaper that I had to restart my system. After logging in, the system hung again. From now on the system hangs every time I log in. I'm also unable to access tty1. Hence I am forced to perform a clean install.&lt;/p&gt;&#xA;&lt;p&gt;It would be realty helpful if anyone can suggest a fix for this issue.&lt;/p&gt;&#xA;" OwnerUserId="26776" LastEditorUserId="26776" LastEditDate="2021-08-20T11:23:27.330" LastActivityDate="2021-09-14T20:26:25.430" Title="System hangs while changing wallpaper" Tags="|desktop|pantheon|release-odin|wallpaper|bugs|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28580" PostTypeId="2" ParentId="25955" CreationDate="2021-08-19T16:12:09.743" Score="0" Body="&lt;p&gt;In the Code app's settings, enable the terminal view. After that, you can freely use can compile your C++ code in the terminal using the CLI. The &lt;code&gt;gcc&lt;/code&gt; command for the GCC compiler should be available for you to use, out of the box.&lt;/p&gt;&#xA;&lt;p&gt;If you wanted something that wanted a more extensible solution with plugins that you download to enable more functionality, I think that &lt;a href=&quot;https://www.sublimetext.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Sublime Text&lt;/a&gt; or &lt;a href=&quot;https://code.visualstudio.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Visual Studio Code&lt;/a&gt; are better options.&lt;/p&gt;&#xA;" OwnerUserId="16528" LastActivityDate="2021-08-19T16:12:09.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28581" PostTypeId="1" CreationDate="2021-08-19T16:27:28.180" Score="0" ViewCount="47" Body="&lt;p&gt;Just successfully printed a bunch of documents but I don't see how to clear these completed jobs. Tried highlighting a job and then &amp;quot;delete&amp;quot; key, right-click, double-click. No response.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="26778" LastActivityDate="2021-08-19T16:27:28.180" Title="How do I clear the printer queue in Completed Jobs section?" Tags="|printer|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28582" PostTypeId="1" CreationDate="2021-08-19T17:52:37.030" Score="1" ViewCount="40" Body="&lt;p&gt;how it's going on?&lt;/p&gt;&#xA;&lt;p&gt;I was upset with the fact that the icons of one of my most used applications, like Vivaldi and Spotify, didn't have the Elementary OS style. So I tried to use AppEditor from Flathub and it didn't work. Then I tried to use Menu Libre installed from Apt and it worked like a charm! I took icons from Elementary OS applications and used them on these Apps. But at the same time, I couldn't see Vivaldi and Spotify on the notification center anymore.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;&lt;p&gt;EDIT: there was an &amp;quot;Other&amp;quot; option in the notification center. Disabling the sound there worked for now.&lt;/p&gt;&#xA;" OwnerUserId="26713" LastEditorUserId="26713" LastEditDate="2021-08-19T18:44:53.010" LastActivityDate="2021-08-19T18:44:53.010" Title="Notification center problems" Tags="|icons|notifications|release-odin|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28583" PostTypeId="1" AcceptedAnswerId="28588" CreationDate="2021-08-19T21:37:54.240" Score="1" ViewCount="436" Body="&lt;p&gt;Previously in Epiphany/Web, you could launch different profiles in new instances using &lt;a href=&quot;http://manpages.ubuntu.com/manpages/focal/man1/epiphany.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;the --profile flag&lt;/a&gt;, similar to Firefox. This was handy if, for example, you wanted a separate instance using a different Google/Firefox Sync account. But everything changed when &lt;strike&gt;the Fire Nation attacked&lt;/strike&gt; elementary switched to Flatpaks, and this doesn't work any more.&lt;/p&gt;&#xA;&lt;p&gt;Installing &lt;code&gt;epiphany-browser&lt;/code&gt; via &lt;code&gt;apt&lt;/code&gt; and doing &lt;code&gt;epiphany-browser --profile=&amp;quot;/home/USER/.local/share/epiphany/PROFILE&amp;quot;&lt;/code&gt; works. However, using the preinstalled version with &lt;code&gt;flatpak run org.gnome.Epiphany --profile=&amp;quot;/home/USER/.local/share/epiphany/PROFILE&amp;quot;&lt;/code&gt; (or the longer version I found in the .desktop file, &lt;code&gt;/usr/bin/flatpak run --branch=daily --arch=x86_64 --command=epiphany org.gnome.Epiphany&lt;/code&gt;) doesn't work; it just launches an incognito window.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to get profiles to work in the Flatpak version of Epiphany/Web? Do they need to be stored in any particular place?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;edit:&lt;/strong&gt; &lt;strike&gt;Figured it out myself, the solution is to go into System Settings→Applications→Permissions and give Gnome Web access to Home &amp;amp; System folders! Leaving this here in case anyone else has this problem.&lt;/strike&gt; As per &lt;a href=&quot;https://elementaryos.stackexchange.com/a/28588/26780&quot;&gt;Michael C.'s answer&lt;/a&gt;, it only needs access to Home, and profiles are stored in &lt;code&gt;~/.var/app/org.gnome.Epiphany&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26780" LastEditorUserId="26780" LastEditDate="2021-08-22T19:58:18.033" LastActivityDate="2021-08-22T19:58:18.033" Title="Does Epiphany/Web support profiles, and if so, where should they be stored?" Tags="|release-odin|epiphany|flatpak|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28584" PostTypeId="1" CreationDate="2021-08-19T23:39:39.063" Score="0" ViewCount="124" Body="&lt;p&gt;Odin Install (integrity verified) halts on a 2011 MacBook Pro 8,2 (A1286) at showing screen &amp;quot;Could Not Install&amp;quot; page showing &amp;quot;Details&amp;quot; &amp;quot;committ logical partitions: unable to create volume group 'data_PQTkP' on &amp;quot;dev/mapper/data_PQTkP&amp;quot;; vgcreate failed with status: 5 (Input/output error (oserror 5))&#xA;INFO: Install error: failed to commit logical partitions: unable to create volume group 'data_PQTkP' on &amp;quot;dev/mapper/data PQTkP&amp;quot;; vgcreate failed with status 5 (Input/output error (oserror5))&lt;/p&gt;&#xA;&lt;p&gt;When I continue to demo mode and try again to install the OS, I get the same message of a hardware error.&lt;/p&gt;&#xA;&lt;p&gt;When I try the installation from the verified Etcher created USB drive, I get to the same error.&lt;/p&gt;&#xA;&lt;p&gt;Please advise, Richard Hood, Napa, CA.  Thank You for your assistance in advance.&lt;/p&gt;&#xA;" OwnerUserId="26781" LastActivityDate="2024-02-14T08:02:30.303" Title="Odin Install (integrity verified) halts on a 2011 MacBook Pro 8,2 (A1286) at showing screen &quot;Could Not Install&quot; page showing &quot;Details&quot;" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28586" PostTypeId="1" CreationDate="2021-08-20T11:46:25.247" Score="0" ViewCount="77" Body="&lt;p&gt;The installation process crashes after selecting installation USB from the boot menu and getting past the elementary OS logo screen by waiting the 10 seconds or pressing enter.&lt;/p&gt;&#xA;&lt;p&gt;Motherboard manufacturer logo quickly flashes and then I get the following error every time:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    1.024924] gpio gpiochip2: (gpio_aaeon): tried to insert a GPIO chop with zero lines&#xA;[    1.024933] gpiochip_add_data_with_key: GPIOs 0..-1 (gpio_aaeon) failed to register, -22&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And a frozen prompt, only option from there is a forced restart.&lt;/p&gt;&#xA;&lt;p&gt;I've tried replacing EFI with the one from Ubuntu image, in case this had something to do with the &lt;a href=&quot;https://github.com/elementary/triage/issues/74&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/74&lt;/a&gt; issue, but with little success. I've also tried different USB drives and image flashing methods. Secure boot is disabled as far as I am aware (ASUS calls it &amp;quot;other os&amp;quot; mode in BIOS, I believe). Also tried to boot with all TPM / Trusted Computing features off, in case it had any effect.&lt;/p&gt;&#xA;&lt;p&gt;I have successfully installed eOS on multiple PCs before, so I do know the process somewhat and have not had such issues previously.&lt;/p&gt;&#xA;&lt;p&gt;System Specs:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;ASUS PRIME B550-PLUS&lt;/li&gt;&#xA;&lt;li&gt;Ryzen 3600&lt;/li&gt;&#xA;&lt;li&gt;32GB RAM&lt;/li&gt;&#xA;&lt;li&gt;6700 XT&lt;/li&gt;&#xA;&lt;li&gt;Intel 660p 2TB Nvme SSD&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;2 Kingston installation flash drives, tried both MBR and GPT.&#xA;Worth noting that this is the PC I am currently writing this on, and that eOS would be installed to an empty partition for dual boot along Windows.&lt;/p&gt;&#xA;" OwnerUserId="26784" LastEditorUserId="26784" LastEditDate="2021-08-20T12:52:36.703" LastActivityDate="2021-08-20T12:52:36.703" Title="Elementary OS 6.0 Stable (20210810) fails to boot, crash after logo screen" Tags="|system-installation|boot|crash|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28588" PostTypeId="2" ParentId="28583" CreationDate="2021-08-20T12:50:01.673" Score="2" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;edit: Figured it out myself, the solution is to go into System Settings→Applications→Permissions and give Gnome Web access to Home &amp;amp; System folders! Leaving this here in case anyone else has this problem.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Well that will work, but it's not safe. This is a web browser, you don't want it to have unlimited system access. The equivalent of ~/.local/share/epiphany under flatpak is ~/.var/app/org.gnome.Epiphany/data/epiphany, so you can just move your profiles there and not worry about giving it extra permissions. Have fun.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2021-08-20T12:50:01.673" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28589" PostTypeId="1" CreationDate="2021-08-20T14:19:31.320" Score="0" ViewCount="791" Body="&lt;p&gt;When I try to open a video in the native app I doesn't work all I see is a black screen, when I open the video using VLC it runs Ok.&lt;/p&gt;&#xA;&lt;p&gt;What can I do?&lt;/p&gt;&#xA;" OwnerUserId="26785" LastActivityDate="2024-01-13T22:05:00.573" Title="My video app dont run in Elementary OS - Odyn" Tags="|applications|apps|videos|video-player|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28593" PostTypeId="1" AcceptedAnswerId="28716" CreationDate="2021-08-20T18:45:26.017" Score="0" ViewCount="112" Body="&lt;p&gt;Running into a weird issue. I recently installled eos 6 on my workstation. Installed latest nvidia drivers (from app center) just fine.&lt;/p&gt;&#xA;&lt;p&gt;Now sometimes when I boot into eos the nvidia drivers don't load and the display goes into low resolution. The display setting also fails to recognize the display when this happens with unknown display error.&lt;/p&gt;&#xA;&lt;p&gt;For now I'm able to solve this problem by rebooting my system (sometimes need to reboot a few times) to resolve this. However this is quite annoying. Any help appreciated.&lt;/p&gt;&#xA;&lt;p&gt;System details:&lt;/p&gt;&#xA;&lt;p&gt;GPU - nvidia rtx 2080S&#xA;Display - asus predator with gsync (1440p, 144hz)&lt;/p&gt;&#xA;" OwnerUserId="26794" LastEditorUserId="26794" LastEditDate="2021-08-22T08:23:00.017" LastActivityDate="2021-09-04T13:55:30.543" Title="Sometimes nvidia drivers don't load - unknown display - low resolution" Tags="|display|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28595" PostTypeId="1" CreationDate="2021-08-21T06:27:07.560" Score="0" ViewCount="162" Body="&lt;p&gt;like I ask, I recently installed elementary 6 odin but when I open the app store, it immediately closes and I can't use it.&lt;/p&gt;&#xA;&lt;p&gt;I already tried to uninstall and reinstall it, but it didn't work&lt;/p&gt;&#xA;&lt;p&gt;For the moment I installed gnome-software and works fine to install apps but I want to use the original appstore in elementary.&lt;/p&gt;&#xA;&lt;p&gt;Some idea of what to do to solve the problem?&lt;/p&gt;&#xA;&lt;p&gt;Many thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="26724" LastActivityDate="2024-01-08T19:01:05.113" Title="Elementary 6 Odin, I open the appstore but it close immedialy, and can't be used, how to fix it?" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28596" PostTypeId="1" CreationDate="2021-08-21T12:25:09.873" Score="1" ViewCount="657" Body="&lt;p&gt;I'm trying to install elementaryOS 6 in a virtual box but I can't get passed the 'install' options on booting the ISO because the bottom/right side of the screen is cut off as it's defaulting to a Guest screen resolution of 800x600.&lt;/p&gt;&#xA;&lt;p&gt;I can't install the Virtualbox Guest Additions, because the elementaryOS ISO is attached to the virtualCD and can't be ejected.&lt;/p&gt;&#xA;&lt;p&gt;I tried adding a secondary virtual CD but that just didn't work.&lt;/p&gt;&#xA;&lt;p&gt;How am I meant to install elementaryOS if the 800x600 screen resolution prevents me progressing through the installer? I can't install the Virtualbox Guest Additions because elementaryOS is in the virtual CD device?&lt;/p&gt;&#xA;" OwnerUserId="26803" LastActivityDate="2022-03-04T18:05:35.537" Title="Can't install elementaryOS in virtualbox as guest screen 800x600" Tags="|resolution|install|virtualbox|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28597" PostTypeId="2" ParentId="28596" CreationDate="2021-08-21T13:51:51.243" Score="0" Body="&lt;p&gt;I was able to resolve my issue by changing the Virtualbox Display Graphics Controller for my elementaryOS virtual machine to the non-default &amp;quot;VBoxVGA&amp;quot;  (the default being &amp;quot;VMSVGA&amp;quot;) and ignoring the warning about changing from the default.&lt;/p&gt;&#xA;" OwnerUserId="26803" LastActivityDate="2021-08-21T13:51:51.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28598" PostTypeId="2" ParentId="28595" CreationDate="2021-08-21T14:45:09.140" Score="0" Body="&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;Have you been able to open the AppStore at least once?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;In the case you were able to open the AppStore before, have you noticed something, or some app you installed inside it, that may have changed its behavior after you installed it?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Have you found a way to update your system without the AppStore?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="26713" LastActivityDate="2021-08-21T14:45:09.140" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28601" PostTypeId="2" ParentId="28589" CreationDate="2021-08-21T18:34:54.063" Score="0" Body="&lt;p&gt;I am also having this problem.  I am totally new to Elementary OS and Linux. I can play music but not video's.  I am currently looking to see if there is a codec pack that needs to be installed but am yet to find one.&lt;/p&gt;&#xA;" OwnerUserId="26799" LastActivityDate="2021-08-21T18:34:54.063" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28603" PostTypeId="1" CreationDate="2021-08-22T09:13:25.007" Score="1" ViewCount="263" Body="&lt;p&gt;I can't install Elementary os 6 in four different ways:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;USB: I'm booting to installation, but then I select custom install it loads and then shows white window.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Grml rescue boot(I'm using Zorin os 16): Can't boot just shows many &lt;code&gt;/init line 49 can't open /dev/sr0 no medium found&lt;/code&gt; lines.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;UNetbootin: Same as in option option 1.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;DVD: It's not even booting.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Please help!&lt;/p&gt;&#xA;" OwnerUserId="26810" LastActivityDate="2021-09-30T15:07:00.740" Title="Can't install Elementary os 6" Tags="|system-installation|boot|dual-boot|usb|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28604" PostTypeId="1" CreationDate="2021-08-22T09:46:46.473" Score="1" ViewCount="264" Body="&lt;p&gt;With Notes-Up when I click on the new note icon is missing and Blue recorder I found that icon is missing too in plank.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rPaOs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rPaOs.png&quot; alt=&quot;Notes-Up&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/a2wEE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/a2wEE.jpg&quot; alt=&quot;Blue recorder&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23403" LastEditorUserId="23403" LastEditDate="2021-08-22T10:40:38.990" LastActivityDate="2021-08-22T10:40:38.990" Title="App icons are missing for certain flatpak apps in the plank" Tags="|plank|icons|release-odin|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28605" PostTypeId="1" CreationDate="2021-08-22T12:07:33.713" Score="0" ViewCount="26" Body="&lt;p&gt;Does anyone know what to do about this Persian keyboard windows layout? It does not show on elementary os 6. The Persian keyboard I have is another time. Help kindly!&lt;/p&gt;&#xA;" OwnerUserId="26812" LastActivityDate="2023-12-27T23:03:25.393" Title="Persian Keyboard Windows layout missing" Tags="|keyboard|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28606" PostTypeId="2" ParentId="25446" CreationDate="2021-08-22T14:29:02.270" Score="0" Body="&lt;p&gt;I also had the same question you are asking, and to solve it, I made a discussion here on StackExchange and on Elementary OS' GitHub Page and also created a issue of it.&lt;/p&gt;&#xA;&lt;p&gt;Please visit the following links&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28515/how-to-update-from-elementary-os-5-1-7-to-elementary-6&quot;&gt;How to update from Elementary OS 5.1.7 to Elementary 6&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Many people told me it is not officially possible till now.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/discussions/535&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/discussions/535&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;GitHub Discussion: There also all I got was disappointment.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/issues/538&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/issues/538&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;GitHub Issue: Status: Closed (Duplicate)&lt;/p&gt;&#xA;&lt;p&gt;It was linked to this older accepted issue: &lt;a href=&quot;https://github.com/elementary/triage/issues/46&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/issues/46&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks &amp;amp; Regards&#xA;Animish Yadav&lt;/p&gt;&#xA;&lt;p&gt;P.S. Sorry for disappointment.&lt;/p&gt;&#xA;" OwnerUserId="26717" LastActivityDate="2021-08-22T14:29:02.270" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28607" PostTypeId="2" ParentId="28484" CreationDate="2021-08-22T17:40:09.240" Score="0" Body="&lt;p&gt;This is what I found out in answer to my 3 questions:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I think you'll have to do it for each individual account.&lt;/li&gt;&#xA;&lt;li&gt;Some account settings transferred and some did not.&lt;/li&gt;&#xA;&lt;li&gt;Steam was problematic.  I had to do a new install from Flatpak, and none of my downloaded games transferred.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Steps to upgrade from elementary OS 5.1 to elementary OS 6.0&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Make a note of all the apps you want/need to retain/re-install&lt;/li&gt;&#xA;&lt;li&gt;Back up your home folder to an external drive (I used deja-dup) and exclude your on-line storage in the backup&lt;/li&gt;&#xA;&lt;li&gt;Create elementary OS install media (I used balena etcher)&lt;/li&gt;&#xA;&lt;li&gt;Install elementary OS (make sure you keep the same user name, it’s important for restoring the home folder backup).  Interestingly, I could only install from the try before install as opposed to direct install.  I’m installing on an HP ZBook 15 G2.&lt;/li&gt;&#xA;&lt;li&gt;Restore your home folder from the external drive (if you used a backup utility, you will have to install it first).&lt;/li&gt;&#xA;&lt;li&gt;Reinstall your apps, using flatpaks or snaps where applicable (that’s how I reinstalled Steam, which was originally installed from a .deb; I couldn’t get it to function properly, so I deleted the .deb install and installed from flatpak instead)&lt;/li&gt;&#xA;&lt;li&gt;Reconnect your accounts where required (for instance, I had to do with BlueMail, but I didn’t have to do it w/ RamBox)&lt;/li&gt;&#xA;&lt;li&gt;I recommend following the Top 14 Things to Do after Installing elementary OS 6 (&lt;a href=&quot;https://www.linuxtechi.com/things-after-installing-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.linuxtechi.com/things-after-installing-elementary-os/&lt;/a&gt;).&lt;/li&gt;&#xA;&lt;li&gt;I was pleasantly surprised that my fragments torrent tool transferred, along with accounts, bookmarks, and settings for Todoist, ExpanDrive, Opera, and FreeOffice file formats.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;After having done all this, I feel okay about it, but I like noodling.  For your average user, this is probably a deal breaker.  elementary OS has gone to the time and trouble to develop an excellent distro that doesn't have a clear/easy upgrade path, unlike ZorinOS, Ubuntu Budgie, or PopOS!  This does not a fabulous UX make.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-08-22T17:40:09.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28608" PostTypeId="2" ParentId="28474" CreationDate="2021-08-22T21:26:08.000" Score="0" Body="&lt;p&gt;I don’t see any version info for your version of Parallels, but as long as you have version 16 (with updates) or newer, this should work just fine.&#xA;The first Parallels edition with M1 support was version 16.5, as an updated feature release.&lt;/p&gt;&#xA;" OwnerUserId="5621" LastActivityDate="2021-08-22T21:26:08.000" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28610" PostTypeId="1" AcceptedAnswerId="28686" CreationDate="2021-08-23T03:17:08.490" Score="1" ViewCount="147" Body="&lt;p&gt;When the calculator is launched, it indicates that the command for the program is &lt;code&gt;io.elementary.calculator&lt;/code&gt;. When one opens the terminal and runs &lt;code&gt;io.elementary.calculator&lt;/code&gt; it gives&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;io.elementary.calculator: command not found&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;What would be the path of the calculator executable to be able to run it from a terminal and also attach a key shortcut to it?&lt;/p&gt;&#xA;" OwnerUserId="26818" LastActivityDate="2021-08-31T15:47:49.380" Title="Where is the calculator executable in elementary OS 6 Odin?" Tags="|calculator|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28613" PostTypeId="1" CreationDate="2021-08-23T12:48:44.763" Score="0" ViewCount="116" Body="&lt;p&gt;After boot live media, i selected custom installation to select partitions but after one or two minutes, installation setup could not find or display or detect my partitions.&#xA;i ran Gparted during partition selection step and it could detect and show my HDD and partitions.&lt;/p&gt;&#xA;&lt;p&gt;why elementary os 6 not display my drive/partitions to continue installation?&lt;/p&gt;&#xA;&lt;p&gt;I have not any issue with ubuntu or mint or even elementary os 5.1.&lt;/p&gt;&#xA;" OwnerUserId="19865" LastActivityDate="2021-08-23T12:48:44.763" Title="hard drive partisions not displayed during installation" Tags="|release-odin|install|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28616" PostTypeId="1" CreationDate="2021-08-23T19:26:46.590" Score="0" ViewCount="22" Body="&lt;p&gt;I did a fresh new installation of Elementary OS Odin, so I created an account for me (administrator) an another for my daughter (default). I logged many times in my account and also in my daughter's account. Now, I cannot login in graphical environment, but I can login by terminal. I changed my password, but it did not work. I also did chown in .Xauthority, but nothing. Change my password, and nothing. apt-get update, upgrade, and again nothing. It's a brand new installation in a brand new laptop.&lt;/p&gt;&#xA;" OwnerUserId="26827" LastActivityDate="2021-08-23T19:26:46.590" Title="can't login in graphical environment" Tags="|greeter|pantheon-terminal|user-interface|release-odin|user|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28617" PostTypeId="2" ParentId="28372" CreationDate="2021-08-23T20:36:32.087" Score="0" Body="&lt;p&gt;I had the same problem on my iMac with v5.1, and also now with v6.0. However, I saw the same bright but colour faded screen with Mint upon resume. I don't know if it is a power issue because the suspend it goes into seems deeper than on the native macOS or Chromium OS which I have also tried. With the Linux versions, the sleeping mac does not respond and wake when the keyboard is pressed whereas with macOS or Chromium OS it does wake instantly. Instead, I have to press the power button once to wake it. I wonder if it is waking from a different state, and the graphics is not properly coming back.&lt;/p&gt;&#xA;" OwnerUserId="12225" LastActivityDate="2021-08-23T20:36:32.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28619" PostTypeId="1" CreationDate="2021-08-24T05:56:04.053" Score="0" ViewCount="105" Body="&lt;p&gt;I'm using ElementaryOS 6 on my main desktop computer and looking for text cursor navigation like MacOS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Example:&lt;/strong&gt; When you hold &lt;code&gt;cmd&lt;/code&gt; and left or right arrow keys, it navigates to the beginning/end of the line vs holding &lt;code&gt;option&lt;/code&gt; with arrow keys navigates to next/previous word/section/.&lt;/p&gt;&#xA;&lt;p&gt;I've looked into packages that completely overhaul the keyboard shortcuts (like Kinto) but I like most of the other defaults ElementaryOS offers. Is there a way to do this without completely changing the keyboard mapping.&lt;/p&gt;&#xA;" OwnerUserId="26831" LastActivityDate="2024-01-17T06:09:16.107" Title="How to get cursor text navigation like MacOS - cmd(ctrl) for end/start of line, option(alt) for next/prev word" Tags="|keyboard-shortcuts|keyboard|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28621" PostTypeId="2" ParentId="26421" CreationDate="2021-08-24T12:14:29.143" Score="0" Body="&lt;p&gt;Successfully tried Pop OS 20.04 LTS (With Nvidia driver) on HP Envy 15 ep0123tx. Also Fedora 34 Workstation with compiling Nvidia graphics driver after installation. Instruction available on internet. Works, but not without some glitches.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Finger print sensor is not recognized rest everything works.&lt;/li&gt;&#xA;&lt;li&gt;Do not save the X config generated by the Nvidia settings utility. The built-in display goes blank after boot. The Nvidia card takes over the primary display port. 3.There are issues in remembering the external monitor setup profile. Things like orientation will be lost across reboots.&lt;/li&gt;&#xA;&lt;li&gt;Generally, I found that video playback is disturbingly choppy.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Maybe there are workarounds for these problems. But I went back to my previous setup. Windows 10 host and Linux as guest on Virtualbox.&lt;/p&gt;&#xA;" OwnerUserId="26832" LastActivityDate="2021-08-24T12:14:29.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28623" PostTypeId="1" CreationDate="2021-08-24T20:29:11.330" Score="2" ViewCount="36" Body="&lt;p&gt;When i use external monitor during unlocking phase, I have black screen without possibility to go over.&#xA;Only Power off with power button can help.&#xA;OS: E6&#xA;Patch: all until now&#xA;It happens with USBC - HDMI connection&lt;/p&gt;&#xA;" OwnerUserId="26833" LastActivityDate="2021-08-24T20:29:11.330" Title="Black screen after unlock screen os 6" Tags="|black-screen|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28624" PostTypeId="1" CreationDate="2021-08-24T20:51:34.397" Score="0" ViewCount="113" Body="&lt;p&gt;I purchased Elementary and I have a problem:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The system does not allow me to install the CHIRP application (&lt;a href=&quot;https://chirp.danplanet.com/projects/chirp/wiki/Download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://chirp.danplanet.com/projects/chirp/wiki/Download&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Can you help please?&lt;/p&gt;&#xA;&lt;p&gt;Thanks**&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;" OwnerUserId="26834" LastEditorUserId="26834" LastEditDate="2021-08-25T12:06:25.383" LastActivityDate="2024-01-14T17:04:20.487" Title="How to install CHIRP? Can you help? - (Elementary OS 6 Odin)" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28625" PostTypeId="1" CreationDate="2021-08-24T21:10:35.790" Score="1" ViewCount="120" Body="&lt;p&gt;How it's going on?&lt;/p&gt;&#xA;&lt;p&gt;I was having troubles with Libre Office from Flathub, so installed the one available on the Ubuntu repository. That being said, Libre Office is not absorbing elementaryOS dark mode. Do some of you guys know which package should I install from the Ubuntu repository so that Libre Office can absorb the dark mode?&lt;/p&gt;&#xA;&lt;p&gt;Ty!&lt;/p&gt;&#xA;" OwnerUserId="26713" LastActivityDate="2024-02-17T01:04:15.520" Title="Dark Mode on Libre Office from Ubuntu repo" Tags="|release-odin|libreoffice|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28627" PostTypeId="1" CreationDate="2021-08-24T23:24:03.583" Score="0" ViewCount="65" Body="&lt;p&gt;The installer assume sector size is 512 bytes, so EFI system partition is 300 MB / 4 and it won't let me proceed with the install.&lt;/p&gt;&#xA;" OwnerUserId="26835" LastActivityDate="2024-01-13T04:06:25.807" Title="Can't install elementary os 6 on a 4k native ssd" Tags="|system-installation|hardware|release-odin|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28628" PostTypeId="1" CreationDate="2021-08-25T00:51:03.893" Score="1" ViewCount="1476" Body="&lt;p&gt;Like the title says, I have problems starting Steam.&lt;/p&gt;&#xA;&lt;p&gt;Dishes out error; You are missing the following 32-bit libraries, and Steam may not run:&#xA;libc.so.6&lt;/p&gt;&#xA;&lt;p&gt;Intel i5-6600k , 64-bit system, 16GB Ram, Nvidia 1070 (470 driver) - Running Elementary 6 Odin&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What I've tried, with no success;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libc6-i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Tried running flatpak update, shows me this error;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~$ flatpak update&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;1. [✗] org.freedesktop.Platform.Compat.i386 20.08  i  flathub 1.0 kB / 152.6 MB&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Warning: While trying to checkout c112a40c3697c2c12149f1041ca32da1cca7e309ff3dfb709b94fbde77beca08&lt;/p&gt;&#xA;&lt;p&gt;into&lt;/p&gt;&#xA;&lt;p&gt;/.local/share/flatpak/runtime/org.freedesktop.Platform.Compat.i386/x86_64/20.08/.c112a40c3697c2c12149f1041ca32da1cca7e309ff3dfb709b94fbde77beca08-0FRZ80:&lt;/p&gt;&#xA;&lt;p&gt;Opening content object&#xA;da544d3558d79dd2f8e90178c902232d4879d603d2f51484aa66f4bf5e9e6678:&lt;/p&gt;&#xA;&lt;p&gt;Couldn't find file object&#xA;'da544d3558d79dd2f8e90178c902232d4879d603d2f51484aa66f4bf5e9e6678'&lt;/p&gt;&#xA;&lt;p&gt;Installation complete.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Running flatpak uninstall unused produces;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~$ flatpak uninstall --unused&lt;/p&gt;&#xA;&lt;p&gt;These runtimes in installation 'system' are pinned and won't be&#xA;removed; see flatpak-pin(1):&lt;br /&gt;&#xA;runtime/org.freedesktop.Platform.GL.default/x86_64/20.08&lt;/p&gt;&#xA;&lt;p&gt;These runtimes in installation 'user' are pinned and won't be removed;&#xA;see flatpak-pin(1):&lt;br /&gt;&#xA;runtime/com.valvesoftware.Steam.CompatibilityTool.Proton/x86_64/stable&lt;/p&gt;&#xA;&lt;p&gt;Nothing unused to uninstall&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Trying to locate libc.so.6 produces;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~$ locate libc.so.6&lt;/p&gt;&#xA;&lt;p&gt;/.local/share/flatpak/runtime/org.freedesktop.Platform/x86_64/20.08/63c4b310325615c74b8b5b2576733e3e7b751026cb5bf458c98ffacd7bfc6235/files/lib/x86_64-linux-gnu/libc.so.6&lt;/p&gt;&#xA;&lt;p&gt;/.local/share/flatpak/runtime/org.kde.Platform/x86_64/5.15/a0d4fa5ab86c591aeb9359410f75a86125a1b6114cc3bb453c487f85c7ccd83a/files/lib/x86_64-linux-gnu/libc.so.6&lt;/p&gt;&#xA;&lt;p&gt;/usr/lib/x86_64-linux-gnu/libc.so.6&lt;/p&gt;&#xA;&lt;p&gt;/var/lib/flatpak/runtime/io.elementary.Platform/x86_64/6/f6458cfe79a53d649c33716c75262c1a2027121f0290b529644adee9a809d39e/files/lib/x86_64-linux-gnu/libc.so.6&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Running apt search libc6-i386 produces this result;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~$ apt search libc6-i386&lt;/p&gt;&#xA;&lt;p&gt;Sorting... Done&lt;/p&gt;&#xA;&lt;p&gt;Full Text Search... Done&lt;/p&gt;&#xA;&lt;p&gt;libc6-i386/focal-updates,now 2.31-0ubuntu9.2 amd64 [installed]   GNU C&#xA;Library: 32-bit shared libraries for AMD64&lt;/p&gt;&#xA;&lt;p&gt;libc6-i386-amd64-cross/focal-updates 2.31-0ubuntu9.2cross1 all   GNU C&#xA;Library: 32-bit shared libraries for AMD64 (for cross-compiling)&lt;/p&gt;&#xA;&lt;p&gt;libc6-i386-cross/focal-updates 2.31-0ubuntu9.2cross1 all   GNU C&#xA;Library: Shared libraries (for cross-compiling)&lt;/p&gt;&#xA;&lt;p&gt;libc6-i386-x32-cross/focal 2.31-0ubuntu7cross1 all   GNU C Library:&#xA;32-bit shared libraries for AMD64 (for cross-compiling)&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;//&lt;/p&gt;&#xA;&lt;p&gt;Ran&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;&#xA;sudo apt-get update&#xA;&#xA;sudo apt-get install libc6:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Did not fix the issue.&lt;/p&gt;&#xA;&lt;p&gt;Uninstalled Steam flatpak and installed the .deb from Steam.&lt;/p&gt;&#xA;&lt;p&gt;Updater starts and finishes.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;New error occurs;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;~$ steam&#xA;Package xterm needs to be installed&lt;/p&gt;&#xA;&lt;p&gt;Running Steam on elementary 6 64-bit&lt;/p&gt;&#xA;&lt;p&gt;STEAM_RUNTIME is enabled automatically&lt;/p&gt;&#xA;&lt;p&gt;Steam runtime environment up-to-date!&lt;/p&gt;&#xA;&lt;p&gt;Steam client's requirements are satisfied&lt;/p&gt;&#xA;&lt;p&gt;WARNING: Using default/fallback debugger launch&lt;/p&gt;&#xA;&lt;p&gt;/.local/share/Steam/ubuntu12_32/steam&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Startup - updater built Jul 20 2021 22:25:51&lt;/p&gt;&#xA;&lt;p&gt;Installing breakpad exception handler for&#xA;appid(steam)/version(1626824053)&lt;/p&gt;&#xA;&lt;p&gt;libGL error: No matching fbConfigs or visuals found&lt;/p&gt;&#xA;&lt;p&gt;libGL error: failed to load driver: swrast&lt;/p&gt;&#xA;&lt;p&gt;SteamUpdateUI: An X Error occurred&lt;/p&gt;&#xA;&lt;p&gt;X Error of failed request:  BadValue (integer parameter out of range&#xA;for operation)&lt;/p&gt;&#xA;&lt;p&gt;Major opcode of failed request:  151 (GLX)&lt;/p&gt;&#xA;&lt;p&gt;Minor opcode of failed request:  3 (X_GLXCreateContext)&lt;/p&gt;&#xA;&lt;p&gt;Value in failed request:  0x0&lt;/p&gt;&#xA;&lt;p&gt;Serial number of failed request:  44&lt;/p&gt;&#xA;&lt;p&gt;xerror_handler: X failed, continuing&lt;/p&gt;&#xA;&lt;p&gt;Looks like steam didn't shutdown cleanly, scheduling immediate update&#xA;check&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Loading cached metrics from disk&#xA;(/.local/share/Steam/package/steam_client_metrics.bin)&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Failed to load cached hosts file (File&#xA;'update_hosts_cached.vdf' not found), using defaults&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Using the following download hosts for Public,&#xA;Realm steamglobal&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] 1. &lt;a href=&quot;http://media.steampowered.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://media.steampowered.com&lt;/a&gt;, /client/,&#xA;Realm 'steamglobal', weight was 1, source = 'baked in'&lt;/p&gt;&#xA;&lt;p&gt;Installing breakpad exception handler for&#xA;appid(steam)/version(1626824053)&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Checking for update on startup&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Checking for available updates...&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:39] Downloading manifest:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://media.steampowered.com/client/steam_client_ubuntu12&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://media.steampowered.com/client/steam_client_ubuntu12&lt;/a&gt; Installing&#xA;breakpad exception handler for appid(steam)/version(1626824053)&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:40] Download skipped: /client/steam_client_ubuntu12&#xA;version 1626824053, installed version 1626824053, existing pending&#xA;version 0&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:40] Nothing to do&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:40] Verifying installation...&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:40] Performing checksum verification of executable&#xA;files&lt;/p&gt;&#xA;&lt;p&gt;[2021-08-25 10:05:40] Verification complete&lt;/p&gt;&#xA;&lt;p&gt;Loaded SDL version 2.0.15-6655637&lt;/p&gt;&#xA;&lt;p&gt;Gtk-Message: Failed to load module &amp;quot;gail&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Gtk-Message: Failed to load module &amp;quot;atk-bridge&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;libGL error: No matching fbConfigs or visuals found&lt;/p&gt;&#xA;&lt;p&gt;libGL error: failed to load driver: swrast&lt;/p&gt;&#xA;&lt;p&gt;Steam: An X Error occurred&lt;/p&gt;&#xA;&lt;p&gt;X Error of failed request:  BadMatch (invalid parameter attributes)&lt;/p&gt;&#xA;&lt;p&gt;Major opcode of failed request:  151&lt;/p&gt;&#xA;&lt;p&gt;Serial number of failed request:  50&lt;/p&gt;&#xA;&lt;p&gt;xerror_handler: X failed, continuing&lt;/p&gt;&#xA;&lt;p&gt;assert_20210825100539_1.dmp[16124]: Uploading dump (out-of-process)&lt;/p&gt;&#xA;&lt;p&gt;/tmp/dumps/assert_20210825100539_1.dmp&lt;/p&gt;&#xA;&lt;p&gt;/.local/share/Steam/steam.sh: line 772: 16089 Segmentation fault&lt;br /&gt;&#xA;$STEAM_DEBUGGER $DEBUGGER_ARGS &amp;quot;$STEAMROOT/$STEAMEXEPATH&amp;quot; &amp;quot;$@&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Running&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install libnvidia-gl-(your driver version here):i386&#xA;    &#xA;sudo apt-get install libatk-adaptor:i386 libgail-common:i386&#xA;    &#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Problem was fixed. Can run steam now.&lt;/p&gt;&#xA;" OwnerUserId="26836" LastEditorUserId="26836" LastEditDate="2021-08-25T08:56:26.823" LastActivityDate="2024-04-06T20:00:30.087" Title="Cannot run Steam; missing libc.so.6" Tags="|steam|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28629" PostTypeId="2" ParentId="14211" CreationDate="2021-08-25T04:35:24.917" Score="0" Body="&lt;p&gt;I have disabled the suspend option.&#xA;Now if I leave the laptop on and don't do anything it will go to sleep after 15 min and asks for the password when woke up.&#xA;After some idle time, the display will be turned off. Which is not the same as suspend I guess.&#xA;I think suspend option in Linux systems is not the same as the sleep option in windows.&#xA;I'm using elementary OS 6.0 ODIN&lt;/p&gt;&#xA;" OwnerUserId="26837" LastActivityDate="2021-08-25T04:35:24.917" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28630" PostTypeId="1" AcceptedAnswerId="28741" CreationDate="2021-08-25T07:07:17.187" Score="0" ViewCount="3998" Body="&lt;p&gt;After installing Elementary OS 6 Odin on a macbook pro 13&amp;quot; late 2011 , network manager only shows wired network, no wifi.&lt;/p&gt;&#xA;&lt;p&gt;Output lspci:&#xA;&lt;code&gt;03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4331 802.11a/b/g/n (rev 02)&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26838" LastActivityDate="2021-09-06T20:28:04.763" Title="No wifi on fresh Odin install" Tags="|wifi|networking|macbook|release-odin|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28631" PostTypeId="1" CreationDate="2021-08-25T11:06:57.167" Score="0" ViewCount="196" Body="&lt;p&gt;i'm a begginer of linux.&lt;br/&gt;&#xA;I've install the stable elementaryOS 6 Odin release:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vueJG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vueJG.png&quot; alt=&quot;build-info&quot; /&gt;&lt;/a&gt;&#xA;When I try to open &amp;quot;network settings&amp;quot; from the tool on the sidebar or from the settings menu it always appear then close immediatly.&#xA;see the gif below:&#xA;&lt;a href=&quot;https://s9.gifyu.com/images/network_settings_problem.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://s9.gifyu.com/images/network_settings_problem.gif&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't know how to resolve it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update 09/02/2021&lt;/strong&gt;&lt;br/&gt;&#xA;As @Goran suggest I've tried to launch &lt;code&gt;sudo io.elementary.switchboard&lt;/code&gt; and then into the network settings but it close immediatly but on terminal appear this:&#xA;&lt;code&gt;(io.elementary.switchboard:2465): Gtk-CRITICAL **: 21:29:29.121: gtk_widget_realize: assertion 'widget-&amp;gt;priv-&amp;gt;anchored || GTK_IS_INVISIBLE (widget)' failed&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;**&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Gtk:ERROR:../../../../gtk/gtkwidget.c:12412:gtk_widget_real_map: assertion failed: (_gtk_widget_get_realized (widget))&lt;/code&gt;&#xA;&lt;code&gt;Bail out! Gtk:ERROR:../../../../gtk/gtkwidget.c:12412:gtk_widget_real_map: assertion failed: (_gtk_widget_get_realized (widget))&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update 08/30/2021:&lt;/strong&gt;&lt;br/&gt;&#xA;I've tried to do a fresh install of elementary OS 6 on my laptop but seems the problem is also at the begin...&#xA;I've a &lt;em&gt;Dell Latitude E7270&lt;/em&gt;, I don't know if anyone else have the same problem.&#xA;Thanks for help&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update 08/26/2021:&lt;/strong&gt;&lt;br/&gt;&#xA;I take the last row of syslog in the last 5 mins when i try to open the network menu:&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:02:45 elementaryPC systemd[1]: Condition check resulted in Run anacron jobs being skipped.&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC gala[1690]: clutter_actor_remove_child: assertion 'CLUTTER_IS_ACTOR (child)' failed&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC gala[1690]: invalid (NULL) pointer instance&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC gala[1690]: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC io.elementary.wingpanel.desktop[3630]: **&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC io.elementary.wingpanel.desktop[3630]: Gtk:ERROR:../../../../gtk/gtkwidget.c:12412:gtk_widget_real_map: assertion failed: (_gtk_widget_get_realized (widget))&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC io.elementary.wingpanel.desktop[3630]: Bail out! Gtk:ERROR:../../../../gtk/gtkwidget.c:12412:gtk_widget_real_map: assertion failed: (_gtk_widget_get_realized (widget))&lt;/code&gt;&lt;br/&gt;&#xA;&lt;code&gt;Aug 26 23:05:08 elementaryPC io.elementary.s[3630]: gtk_widget_realize: assertion 'widget-&amp;gt;priv-&amp;gt;anchored || GTK_IS_INVISIBLE (widget)' failed&lt;/code&gt;&lt;br/&gt;&lt;/p&gt;&#xA;&lt;p&gt;Seems there is a problem with an element named &lt;code&gt;io.elementary.wingpanel.desktop&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26839" LastEditorUserId="26839" LastEditDate="2021-09-02T19:36:34.770" LastActivityDate="2024-01-21T08:01:00.120" Title="When try to open network settings it close immediatly" Tags="|networking|release-odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28633" PostTypeId="1" CreationDate="2021-08-25T18:18:26.710" Score="0" ViewCount="176" Body="&lt;p&gt;I hadn't updated my laptop in about 3 months, I usually just suspend it.&lt;/p&gt;&#xA;&lt;p&gt;I finally restart it and i'm only able to boot into tty.&lt;/p&gt;&#xA;&lt;p&gt;I know reinstalling the os would fix the issue, but I have 1TB worth of data that i'd rather not loose.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;What i've tried so far&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Reinstalling elementary-desktop&lt;/li&gt;&#xA;&lt;li&gt;Reinstalling lightdm&lt;/li&gt;&#xA;&lt;li&gt;Reinstalling Xorg&lt;/li&gt;&#xA;&lt;li&gt;Trying to start light service using systemctl which fails&lt;/li&gt;&#xA;&lt;li&gt;Trying to start Xorg using startx which also fails&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Please I would appreciate any help or ideas in resolving this issue.&lt;/p&gt;&#xA;" OwnerUserId="26842" LastActivityDate="2021-08-25T18:18:26.710" Title="Elementary os Hera only booting into tty" Tags="|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28634" PostTypeId="2" ParentId="28624" CreationDate="2021-08-25T21:05:02.080" Score="0" Body="&lt;p&gt;I tried it and confirmed that when you click on the flatpak link and choose &amp;quot;Open with Sideload&amp;quot;, it hangs forever. You need to install it using the command line.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Download the flatpak using &amp;quot;Save as…&amp;quot;.&lt;/li&gt;&#xA;&lt;li&gt;Open Terminal and do &lt;code&gt;flatpak install /path/to/flatpak&lt;/code&gt;. For example, if you saved it to your Downloads folder, you would do &lt;code&gt;flatpak install ~/Downloads/chirp-daily-DATE.flatpak&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;There will be a few prompts, in Terminal and in pop-up dialogs, to enter your password and install runtimes. This is what you should see:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LA19u.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LA19u.png&quot; alt=&quot;Screenshot of Chirp flatpak being installed from the command line.&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can uninstall it with &lt;code&gt;flatpak uninstall com.danplanet.chirp&lt;/code&gt; and then &lt;code&gt;flatpak uninstall --unused&lt;/code&gt; to remove the extra stuff. Hope this helps!&lt;/p&gt;&#xA;" OwnerUserId="26780" LastActivityDate="2021-08-25T21:05:02.080" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28635" PostTypeId="1" CreationDate="2021-08-25T23:02:54.953" Score="1" ViewCount="166" Body="&lt;p&gt;I installed the Nvidia 340 package from the store, then all i get is a black screen and thats it. is there a way to fix it? or to intall nvidia and make it work, my card is a Nvidia gtx 750 ti&lt;/p&gt;&#xA;" OwnerUserId="26843" LastActivityDate="2024-01-27T14:05:45.650" Title="Black screen after Nvidia install" Tags="|black-screen|nvidia-driver|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28636" PostTypeId="2" ParentId="28627" CreationDate="2021-08-26T00:06:01.943" Score="0" Body="&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZRUXN.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Same thing happening in MacBook Pro 15 (2017) GParted is showing correctly the sizes, not the installer.&lt;/p&gt;&#xA;" OwnerUserId="26844" LastActivityDate="2021-08-26T00:06:01.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28640" PostTypeId="2" ParentId="28630" CreationDate="2021-08-26T14:34:33.953" Score="0" Body="&lt;p&gt;After you connect to internet using your smartphone and USB cable, do this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;More details here &lt;a href=&quot;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-08-26T14:34:33.953" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28642" PostTypeId="1" AcceptedAnswerId="28651" CreationDate="2021-08-27T01:32:46.610" Score="0" ViewCount="160" Body="&lt;p&gt;I have eOS 6 and is trying to install the virt-view software. The &lt;code&gt;apt install virt-view&lt;/code&gt; command failed with the following dependencies error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ apt install virt-viewer&#xA;&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; elementary-tweaks : Depends: libgranite5 (&amp;gt;= 0.2.0) but it is not going to be installed&#xA; virt-viewer : Depends: libgovirt2 (&amp;gt;= 0.3.4) but it is not going to be installed&#xA;               Depends: libgtk-vnc-2.0-0 (&amp;gt;= 0.4.1) but it is not going to be installed&#xA;               Depends: libspice-client-glib-2.0-8 (&amp;gt;= 0.35) but it is not going to be installed&#xA;               Depends: libspice-client-gtk-3.0-5 (&amp;gt;= 0.32) but it is not going to be installed&#xA;               Depends: libvirt-glib-1.0-0 (&amp;gt;= 0.1.8) but it is not going to be installed&#xA;               Depends: libvirt0 (&amp;gt;= 1.2.8~rc2) but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried &lt;code&gt;apt --fix-broken install&lt;/code&gt; but that didn't fix the issue. Any idea how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="26851" LastEditorUserId="25612" LastEditDate="2021-08-31T13:33:57.220" LastActivityDate="2021-08-31T13:33:57.220" Title="apt install failed with unmet dependencies" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28643" PostTypeId="1" CreationDate="2021-08-27T10:27:39.860" Score="1" ViewCount="414" Body="&lt;p&gt;I've been running elementary OS alongside Mac OS for a few years now on my Macbook Pro 2016. Now Odin is out, I decided to erase my disk to get rid of Mac OS and go 100% elementary, but I've found some trouble with the new installer. After I click on delete full disk and install, I get a &amp;quot;no enough space&amp;quot; message. Trying to solve it, I decided to go the &amp;quot;custom install&amp;quot; route.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vdlFO.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vdlFO.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;GParted gives the following error (note that the snapshot here was taken on the live mode just because I forgot to take it while trying to install. Despite the error, Files recognized the disk). I ignored the error so could see my partitions and deleted all of them, creating a new one for Odin.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bgyEx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bgyEx.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But despite of it, the installer does not show the partitions or even the disk&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CyBs2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CyBs2.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Note that I've checked that both Ubuntu 20.04 and 21.04 recognize the disk correctly, so it seems that this could be the new installer's fault.&lt;/p&gt;&#xA;&lt;p&gt;Edit: it seem it's a &lt;a href=&quot;https://github.com/elementary/installer/issues/617&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2767" LastEditorUserId="2767" LastEditDate="2021-08-28T00:39:03.147" LastActivityDate="2021-11-24T15:45:29.430" Title="Elementary OS Odin installer not showing partitions on Macbook Pro 2016" Tags="|macbook|install|disk|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28644" PostTypeId="2" ParentId="239" CreationDate="2021-08-27T10:50:28.387" Score="0" Body="&lt;p&gt;Just a quick update that at least as of elementary OS 6 (Odin), this schema appears to be missing. Couldn’t find anything for cerbere in gsettings.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings list-keys org.pantheon.cerbere&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Results in:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;No such schema “org.pantheon.cerbere”&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Anyone know where these settings have moved?&lt;/p&gt;&#xA;&lt;p&gt;(I looked around a bit and can’t seem to find them. Instructions, e.g., &lt;a href=&quot;https://gitlab.com/pantheon-debian/cerbere/-/blob/pantheon-debian-daily/debian/io.elementary.cerbere.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gitlab.com/pantheon-debian/cerbere/-/blob/pantheon-debian-daily/debian/io.elementary.cerbere.1&lt;/a&gt;, all seem outdated.)&lt;/p&gt;&#xA;&lt;p&gt;(Use case: just need to hide wingpanel top bar temporarily to take a screenshot without it and thought I’d do it by having cerbere stop watching wingpanel instead of killing it outright.)&lt;/p&gt;&#xA;" OwnerUserId="26855" LastActivityDate="2021-08-27T10:50:28.387" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28645" PostTypeId="1" CreationDate="2021-08-27T11:30:38.583" Score="0" ViewCount="27" Body="&lt;p&gt;can I run elementary os on Vaio Z1?&#xA;Intel Pentium 1.7GHz&#xA;14.1 SXGA TFT display (1400 x 1050)&#xA;512MB DDR SDRAM&#xA;60GB Hard Drive&lt;/p&gt;&#xA;" OwnerUserId="26858" LastActivityDate="2024-01-14T21:06:45.770" Title="can I run elementary os on Vaio Z1?" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28646" PostTypeId="2" ParentId="28645" CreationDate="2021-08-27T13:06:58.777" Score="0" Body="&lt;p&gt;Welcome to eOS!&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately, your notebook does not meet the minimum RAM requirements for Elementary OS, not to mention some of the other hardware. Based on &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;the installation page&lt;/a&gt;, you will need at least the following:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/li&gt;&#xA;&lt;li&gt;4 GB of system memory (RAM)&lt;/li&gt;&#xA;&lt;li&gt;Solid state drive (SSD) with 15 GB of free space&lt;/li&gt;&#xA;&lt;li&gt;Internet access&lt;/li&gt;&#xA;&lt;li&gt;Built-in or wired mouse/touchpad and keyboard&lt;/li&gt;&#xA;&lt;li&gt;1024×768 minimum resolution display&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Using the specs you've outlined, Google tells me that you are &lt;em&gt;probably&lt;/em&gt; using a VAIO Z1WA from Mid-2004, which comes with the following specifications:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt;Category&lt;/th&gt;&#xA;&lt;th&gt;Specification&lt;/th&gt;&#xA;&lt;th&gt;Yay or Nay&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;CPU:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;Intel Pentium 1.7GHz processor&lt;/td&gt;&#xA;&lt;td&gt;Insufficient&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;RAM:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;512MB DDR SDRAM&lt;/td&gt;&#xA;&lt;td&gt;Insufficient&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Storage:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;60GB Hard Drive (4200rpm)&lt;/td&gt;&#xA;&lt;td&gt;You will find this too slow&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Display:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;14.1 SXGA TFT display (1400 x 1050)&lt;/td&gt;&#xA;&lt;td&gt;Meets Requirements&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Optical:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;Integrated CD-RW/DVD-ROM&lt;/td&gt;&#xA;&lt;td&gt;Likely Compatible&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Network:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;Integrated 802.11 b/g Wireless&lt;/td&gt;&#xA;&lt;td&gt;Likely Compatible&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;While I am a strong proponent of using computer hardware for as long as possible (my main machine is from 2013 and my phone is from 2014!), this particular computer will not be able to run most of the modern Linux distributions. Aside from the lack of RAM, the processor is &lt;a href=&quot;https://ark.intel.com/content/www/us/en/ark/products/27578/intel-pentium-m-processor-1-70-ghz-1m-cache-400-mhz-fsb.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;a 32-bit single-core CPU&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;That said, all is not lost. Your computer &lt;em&gt;may&lt;/em&gt; have enough power to run &lt;a href=&quot;https://zorin.com/os/download/15/lite/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Zorin OS Lite&lt;/a&gt; or &lt;a href=&quot;https://www.bodhilinux.com/download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bodhi Linux&lt;/a&gt;, which are two actively maintained Linux distributions.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-27T13:06:58.777" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28649" PostTypeId="2" ParentId="28332" CreationDate="2021-08-27T17:52:03.667" Score="1" Body="&lt;p&gt;As mentioned in my comment I had the same issue with August 10 release, but installation with the August 23 iso went without issues! Just redownload from the website should get you the newest iso.&lt;/p&gt;&#xA;" OwnerUserId="15966" LastActivityDate="2021-08-27T17:52:03.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28650" PostTypeId="2" ParentId="28584" CreationDate="2021-08-27T17:55:26.203" Score="0" Body="&lt;p&gt;I had this same issue, on different hardware though (aging HP Compaq). Demo mode working fine, install hanging on &amp;quot;unable to create volume group&amp;quot;. Luckily the new iso from August 23 fixed it, and it installs fine for me now. Maybe worth to download again and retry?&lt;/p&gt;&#xA;" OwnerUserId="15966" LastActivityDate="2021-08-27T17:55:26.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28651" PostTypeId="2" ParentId="28642" CreationDate="2021-08-27T18:21:52.367" Score="0" Body="&lt;p&gt;I can help you with the &lt;code&gt;elementary-tweaks&lt;/code&gt; issue, it won't work on Odin, you'll have to install &lt;code&gt;pantheon-tweaks&lt;/code&gt;.&#xA;Here you can find how to install it:&#xA;&lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-08-27T18:21:52.367" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28652" PostTypeId="1" CreationDate="2021-08-27T18:32:24.170" Score="1" ViewCount="59" Body="&lt;p&gt;So, one of the sound effects that I don't like is the screenshot sound with the elementary screenshot app when you press the printscreen key. I found out that disabling the &amp;quot;Play sound&amp;quot; tick from the event alerts in sound settings disables some of the sound effects, like the file deletion sound from the file manager which I also didn't like, but that option still didn't disable the screenshot sound. Is there a way to do this? Thank you!&lt;/p&gt;&#xA;" OwnerUserId="26864" LastActivityDate="2021-08-27T18:32:24.170" Title="How to disable the screenshot sound?" Tags="|settings|screenshot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28653" PostTypeId="2" ParentId="28518" CreationDate="2021-08-27T18:36:41.963" Score="0" Body="&lt;p&gt;I was wondering the same, see here: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/pcl1u0/apps_installed_using_deb_files_and_snap/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/pcl1u0/apps_installed_using_deb_files_and_snap/&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="14071" LastActivityDate="2021-08-27T18:36:41.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28654" PostTypeId="1" CreationDate="2021-08-27T21:09:00.917" Score="2" ViewCount="754" Body="&lt;p&gt;So I am new to elementary OS and also flatpaks in general. How do you give access to flatpak apps so that they have access to system libraries? I can't access the system JDK with Intellij for example, or Pycharm, or like any other IDE? I have tried the flatpak override command with &amp;quot;sudo flatpak override com.jetbrains.IntelliJ-IDEA-Ultimate --filesystem=/usr/lib/jvm&amp;quot; but this didn't work. This is just one example and I want to do this kind of thing to different apps as well.&lt;/p&gt;&#xA;&lt;p&gt;Any help is appreciated! Thank you!&lt;/p&gt;&#xA;" OwnerUserId="26864" LastActivityDate="2021-08-27T21:09:00.917" Title="How to give flatpak apps access to system libraries (eg. give Intellij access to system JDK)?" Tags="|flatpak|permissions|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28655" PostTypeId="1" CreationDate="2021-08-28T04:40:59.677" Score="0" ViewCount="96" Body="&lt;p&gt;when ever I try to install any application in AppCenter the following error occurred&#xA;&lt;a href=&quot;https://i.stack.imgur.com/uY8HP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uY8HP.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26867" LastActivityDate="2024-01-16T23:06:20.813" Title="I can't update anymore with the AppCenter" Tags="|updates|applications|appcenter|error|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28656" PostTypeId="2" ParentId="28619" CreationDate="2021-08-28T04:59:24.903" Score="0" Body="&lt;p&gt;I can confirm that the post @matigo linked still works. However, because I found the explanation in that post a little unclear, I wanted to spell out what I did.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/autokey/autokey&quot; rel=&quot;nofollow noreferrer&quot;&gt;Autokey&lt;/a&gt; is easy to set up and will give the desired result. Note that Autokey does not change the bindings; rather, it runs in the background and intercepts keyboard shortcuts and then maps them to specified shortcuts.&#xA;Install Autokey from the Ubuntu repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install autokey-gtk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then launch the Application Menu and select Autokey. Click on Edit &amp;gt; Preferences and check the box for “Automatically start Autokey at login.”&lt;/p&gt;&#xA;&lt;p&gt;Now you can specify the mappings. Click New &amp;gt; Phrase and give the new item a name. In the text box where it says “enter phrase contents” type the keyboard shortcut you want to map to. For example, &lt;code&gt;&amp;lt;home&amp;gt;&lt;/code&gt;. Then click “Set” in the hotkey row, click “Press to set” and then you can type the key combination you want to map from. Finally, click “Save” and repeat for all desired keyboard mappings.&lt;/p&gt;&#xA;&lt;p&gt;To get the combinations you asked for, I created four entries and then an additional four entries with &lt;code&gt;&amp;lt;shift&amp;gt;&lt;/code&gt; included to select the text. Just make sure the arrow key or end/home is always the final component of the command, or it will paste text instead of executing the shortcut.&lt;/p&gt;&#xA;&lt;p&gt;Here are a couple examples of what my Autokey entries look like at the end.&lt;/p&gt;&#xA;&lt;p&gt;Move cursor to beginning of line.&#xA;Text box: &lt;code&gt;&amp;lt;home&amp;gt;&lt;/code&gt;&#xA;Hotkey: &lt;code&gt;&amp;lt;super&amp;gt;+&amp;lt;left&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Move cursor word left and select word.&#xA;Text box: &lt;code&gt;&amp;lt;shift&amp;gt;+&amp;lt;ctrl&amp;gt;+&amp;lt;left&amp;gt;&lt;/code&gt;&#xA;Hotkey: &lt;code&gt;&amp;lt;alt&amp;gt;+&amp;lt;shift&amp;gt;+&amp;lt;left&amp;gt;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Make sure to keep &amp;quot;Paste Using Keyboard&amp;quot; selected.&lt;/p&gt;&#xA;&lt;p&gt;Also if you replace a default shortcut, you will have to disable it. In this case, go to System Settings &amp;gt; Keyboard &amp;gt; Shortcuts &amp;gt; Workspaces. And disable &lt;code&gt;&amp;lt;super&amp;gt;+&amp;lt;left&amp;gt;&lt;/code&gt; and &lt;code&gt;&amp;lt;super&amp;gt;+&amp;lt;right&amp;gt;&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;This seems to be working well. Though I think ideally there should be an option to make these changes this under System Settings &amp;gt; Keyboard &amp;gt; Shortcuts. If I don’t see a feature request on Github, I might go ahead and add one.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastEditorUserId="26142" LastEditDate="2021-08-30T02:48:32.337" LastActivityDate="2021-08-30T02:48:32.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28658" PostTypeId="1" CreationDate="2021-08-28T07:40:35.997" Score="1" ViewCount="77" Body="&lt;p&gt;I would like to erase hera and install odin on top of it. I cannot use the erase and install option as it seems to erase all partitions on the disk and would erase windows data.&lt;/p&gt;&#xA;&lt;p&gt;When using custom install, I need to choose a boot partition. I do not remember having done this for installing hera.&#xA;I can see there is already an efi partition of 260mb (first partition on disk).&lt;/p&gt;&#xA;&lt;p&gt;Do I need to use and select this already existing partition for boot? or create a new one of 260mb?&lt;/p&gt;&#xA;&lt;p&gt;then I would create paritions for root home and swap as seems it would easier further upgrade or reinstall process in future. I would have 20gb for root, 60gb for home and 8gb for swap, all in ext4&lt;/p&gt;&#xA;" OwnerUserId="26870" LastActivityDate="2024-01-15T11:02:50.340" Title="hera to odin, on windows surface 6 dual boot" Tags="|boot|microsoft-windows|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28659" PostTypeId="2" ParentId="28658" CreationDate="2021-08-28T08:08:58.717" Score="0" Body="&lt;p&gt;from &lt;a href=&quot;https://help.ubuntu.com/community/UEFI&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/UEFI&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;If your disk already contains an ESP (eg if your computer had Windows&#xA;8 preinstalled), it can be used for Ubuntu too. Do not format it. It&#xA;is strongly recommended to have only 1 ESP per disk.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So I will try to use the existing one and hope its all good&lt;/p&gt;&#xA;" OwnerUserId="26870" LastActivityDate="2021-08-28T08:08:58.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28660" PostTypeId="1" CreationDate="2021-08-28T09:24:58.777" Score="2" ViewCount="808" Body="&lt;p&gt;I need to install NVIDIA drivers on my pc. How can I do?&#xA;I tried &amp;quot;&amp;quot;&amp;quot;software-properties-gtk&amp;quot;&amp;quot;&amp;quot; but I have an infinite loop login.&#xA;I discovered that my driver needs a kernel that works only on Ubuntu 16.04 and before.&#xA;Since I love elementary os, I don't know what to do&lt;/p&gt;&#xA;" OwnerUserId="26871" LastEditorUserId="26871" LastEditDate="2021-08-29T12:11:16.707" LastActivityDate="2021-09-03T17:23:31.673" Title="NVIDIA graphic drivers elementary os 6" Tags="|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28661" PostTypeId="2" ParentId="24647" CreationDate="2021-08-28T14:48:58.113" Score="0" Body="&lt;p&gt;You don’t have to pay for anything unless you want to. The AppCenter is pay-what-you-want store, so if you don’t have money or that you cannot pay for any reason like in your case your only option is PayPal which is currently unavailable you can just change its price to zero then download it.&lt;/p&gt;&#xA;" OwnerUserId="26873" LastActivityDate="2021-08-28T14:48:58.113" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28663" PostTypeId="1" CreationDate="2021-08-28T19:58:19.490" Score="1" ViewCount="102" Body="&lt;p&gt;After installing some mojave themes, I now have a different lock screen and a cog wheel in the lower right corner:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/0vR3o.jpg&quot; alt=&quot;Lock Screen&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;It shows other distros like Ubuntu, which I can log in to. My question is: why is this there and are these actual distros I have on my laptop, next to elementary os?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="26874" LastEditorUserId="25612" LastEditDate="2021-10-13T08:26:57.737" LastActivityDate="2024-03-01T20:00:19.427" Title="Can somebody explain why I have these options in the corner?" Tags="|greeter|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28664" PostTypeId="2" ParentId="28663" CreationDate="2021-08-29T03:35:46.847" Score="0" Body="&lt;p&gt;Those are not distros, but desktop environments. If — for example — you installed McMojave, then a Gnome desktop would have been downloaded as the theme depends on that DE. If you take a look at your install log, you’ll see which packages required which desktop environments, resulting in the download &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-29T03:35:46.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28666" PostTypeId="2" ParentId="28242" CreationDate="2021-08-29T06:15:59.043" Score="1" Body="&lt;p&gt;I've tried it too and if I selected Czech language and US keyboard, i stalation aborted at the begining. If I selected US language and czech keyboard it has stucked at 70 percent. In complete english it worked well.&lt;/p&gt;&#xA;" OwnerUserId="26876" LastActivityDate="2021-08-29T06:15:59.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28669" PostTypeId="2" ParentId="28663" CreationDate="2021-08-29T14:21:46.810" Score="0" Body="&lt;p&gt;In Linux jargon, the lockscreen is called a &lt;a href=&quot;https://askubuntu.com/questions/75755/how-to-change-the-lightdm-theme-greeter&quot;&gt;greeter&lt;/a&gt; and the programs which manage the panels &amp;amp; windows after you log in are called a &lt;a href=&quot;https://en.wikipedia.org/wiki/Desktop_environment&quot; rel=&quot;nofollow noreferrer&quot;&gt;desktop environment&lt;/a&gt;. The default desktop environment of elementary is &lt;a href=&quot;https://en.wikipedia.org/wiki/Elementary_OS#Pantheon_desktop_environment&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pantheon&lt;/a&gt; and its default greeter is the &lt;a href=&quot;https://github.com/elementary/greeter&quot; rel=&quot;nofollow noreferrer&quot;&gt;Pantheon Greeter&lt;/a&gt;. Apparently, when installing the themes, you also installed the entire &lt;a href=&quot;https://www.gnome.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Gnome&lt;/a&gt; desktop environment and its default greeter.&lt;/p&gt;&#xA;&lt;p&gt;The cog in your screenshot is a part of the Gnome Greeter and it lets you choose which desktop environment to launch. If you're happy with the new greeter, you can just choose Pantheon and log in.&lt;/p&gt;&#xA;&lt;p&gt;To get the default greeter back, you can follow &lt;a href=&quot;https://askubuntu.com/questions/639733/which-configuration-files-should-i-change-for-lightdm-and-pantheon-greeter&quot;&gt;this answer&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2021-08-29T14:37:25.257" LastActivityDate="2021-08-29T14:37:25.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28670" PostTypeId="2" ParentId="28655" CreationDate="2021-08-29T14:46:27.467" Score="0" Body="&lt;p&gt;I have the exact same problem. Have done nothing special, installing, deleting or anything else besides the updates in AppCenter every now and then.&#xA;So what to do?&lt;/p&gt;&#xA;&lt;p&gt;Edit:&#xA;Seems to only affect the system apps, like AppCenter, Files, etc (see the list in OP's image). Krita and Evolution updated fine from AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="26880" LastEditorUserId="26880" LastEditDate="2021-08-29T14:51:57.057" LastActivityDate="2021-08-29T14:51:57.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28672" PostTypeId="1" CreationDate="2021-08-29T15:39:56.950" Score="0" ViewCount="90" Body="&lt;p&gt;Question is similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17341/hibernate-option-in-juno&quot;&gt;Hibernate option in Juno&lt;/a&gt; but for the Odin.&lt;/p&gt;&#xA;&lt;p&gt;Does anybody have an instruction how to setting up hibernate mode?&lt;/p&gt;&#xA;" OwnerUserId="25410" LastEditorUserId="25410" LastEditDate="2021-08-29T16:11:27.977" LastActivityDate="2024-01-10T15:05:25.677" Title="Hibernate option in Odin" Tags="|wingpanel|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28673" PostTypeId="2" ParentId="11112" CreationDate="2021-08-29T18:45:37.313" Score="1" Body="&lt;p&gt;Try to turn off these in Chrome---&amp;gt; Settings---&amp;gt; System.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/fc1tT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/fc1tT.png&quot; alt=&quot;Chrome Hidden Settings to increase battery and speed of PC&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26884" LastActivityDate="2021-08-29T18:45:37.313" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28675" PostTypeId="1" AcceptedAnswerId="28681" CreationDate="2021-08-30T13:43:33.590" Score="0" ViewCount="36" Body="&lt;p&gt;While installing Elementary 6 in VirtualBox (host is Ubuntu 20.04), inadvertently I made a typing mistake in my name as user - ANUPAM became AMUPAM. How to rectify the spelling?&lt;/p&gt;&#xA;" OwnerUserId="19156" LastActivityDate="2021-08-31T02:24:45.493" Title="HOW TO CORRECT THE SPELLING OF MY USERNAME" Tags="|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28676" PostTypeId="2" ParentId="28625" CreationDate="2021-08-30T15:28:01.460" Score="0" Body="&lt;p&gt;Try putting the following text&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Settings]&#xA;gtk-application-prefer-dark-theme=1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;into the file &lt;code&gt;~/.config/gtk-3.0/settings.ini&lt;/code&gt; (that tilde means your home directory). If the file doesn't exist, you can create it. This should tell all applications to prefer dark themes.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-08-30T15:28:01.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28677" PostTypeId="1" CreationDate="2021-08-30T16:55:49.790" Score="1" ViewCount="122" Body="&lt;p&gt;This was working yesterday when I installed,though I've done a bit of setup afterwards and now can't figure out why I'm not receiving notifications anymore.  Even just running &lt;code&gt;notify-send &amp;quot;Hello world!&amp;quot;&lt;/code&gt; in the terminal doesn't prompt anything.  Any idea how I can troubleshoot?&lt;/p&gt;&#xA;" OwnerUserId="26888" LastActivityDate="2023-12-11T04:10:46.310" Title="Not receiving any notifications in elementary OS 6" Tags="|notifications|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28678" PostTypeId="1" AcceptedAnswerId="28680" CreationDate="2021-08-30T20:11:15.377" Score="-1" ViewCount="16" Body="&lt;p&gt;I Used linux as a last resort to recover my pc but now that i have, i want to go back without spending £100 on media&#xA;Is it possible to make one on this?&lt;/p&gt;&#xA;" OwnerUserId="26889" LastActivityDate="2021-08-31T02:11:12.380" Title="Can I Make a windows boot usb on eOS 6.0?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28679" PostTypeId="2" ParentId="28231" CreationDate="2021-08-30T21:23:12.900" Score="0" Body="&lt;p&gt;U can use efibootmgr command to clear the unnecessary entries in your bios :&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://doc.ubuntu-fr.org/efibootmgr&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://doc.ubuntu-fr.org/efibootmgr&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;for usage&lt;/p&gt;&#xA;" OwnerUserId="26630" LastActivityDate="2021-08-30T21:23:12.900" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28680" PostTypeId="2" ParentId="28678" CreationDate="2021-08-31T02:11:12.380" Score="0" Body="&lt;p&gt;&lt;em&gt;Technically&lt;/em&gt;, yes ... but it'll be a right pain in the bum. Generally speaking, there are two ways to make a Windows installation USB when your main computer does not run Windows:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Borrow a friend or family member's Windows machine for 15 minutes and &lt;a href=&quot;https://support.microsoft.com/en-us/windows/create-installation-media-for-windows-99a58364-8c02-206f-aa6f-40c3b507420d&quot; rel=&quot;nofollow noreferrer&quot;&gt;follow these steps&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;The VM-shuffle:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://www.microsoft.com/en-gb/software-download/windows10ISO&quot; rel=&quot;nofollow noreferrer&quot;&gt;Download a Windows 10 ISO file&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;Install it in a VirtualBox VM (You will not need to activate Windows for this installation, as it's being used only for an hour)&lt;/li&gt;&#xA;&lt;li&gt;Have the USB stick you plan to use auto-assigned to be passed through to the Windows VM (so it's never mounted by the host)&lt;/li&gt;&#xA;&lt;li&gt;Visit the link in the first option and follow those steps to create a bootable USB stick&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; If you have a remarkably powerful computer, you can skip steps 1 and 2 by &lt;a href=&quot;https://developer.microsoft.com/en-us/microsoft-edge/tools/vms/&quot; rel=&quot;nofollow noreferrer&quot;&gt;downloading a pre-made Virtual Box VM from Microsoft&lt;/a&gt;. I am using a 9th Generation Core i7 with 32GB RAM for development and these VMs are just about the only thing that ever get the processor fans spinning at their maximum velocity.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;For the second option, I find that the process fails 90% of the time when &lt;em&gt;not&lt;/em&gt; using a Samsung or SanDisk USB stick. For the first option, just about any device that claims to be a flash-based USB storage device will work.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-31T02:11:12.380" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28681" PostTypeId="2" ParentId="28675" CreationDate="2021-08-31T02:24:45.493" Score="0" Body="&lt;p&gt;If the name of the user account is wrong, the best way to change it is to create a &lt;em&gt;new&lt;/em&gt; user account, grant it admin privileges, and log in with the new account.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open &amp;quot;Settings&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Find &amp;quot;User Accounts&amp;quot; (near the bottom) and open:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/WEmL1.png&quot; alt=&quot;Settings - User Accounts&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Click the little &amp;quot;+&amp;quot; in the lower-left corner to create a new account&lt;/li&gt;&#xA;&lt;li&gt;Set the details, ensuring that your account is set as &amp;quot;Administrator&amp;quot; (so that you can perform updates and run commands with &lt;code&gt;sudo&lt;/code&gt;)&#xA;&lt;img src=&quot;https://i.stack.imgur.com/wMRtr.png&quot; alt=&quot;Add User&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Press &amp;quot;Create User&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Sign out of your current account&lt;/li&gt;&#xA;&lt;li&gt;Sign into your new account&lt;/li&gt;&#xA;&lt;li&gt;Configure the new account as you would like&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;(Optional)&lt;/em&gt; Delete the old account&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-08-31T02:24:45.493" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28682" PostTypeId="1" CreationDate="2021-08-31T10:51:28.547" Score="1" ViewCount="157" Body="&lt;p&gt;I have a different problem while installing EOS 6 Odin in my Dell Inspiron with UEFI boot.&lt;/p&gt;&#xA;&lt;p&gt;Initially I had issue with boot with the previous ISO download. But when I downloaded August 23rd IOS file and created new bootable USB using Etcher as suggested in the official website, the issue of boot went away and I am able to see the demo (Try Demo).&lt;/p&gt;&#xA;&lt;p&gt;But when I tried to install it alongside Windows 10 (with 463GB of space available for EOS), after I chose the language and keyboard, it tries to fetch the current partitions (Getting current configuration) but after couple of seconds the spinner disappears and does not show anything in the screen; I cannot see any existing partitions and Next button (the other button to proceed the installation) remains disabled.&lt;/p&gt;&#xA;&lt;p&gt;But I can see the Modify Partitions button at the bottom left corner of the screen and can create the partitions as well. Even after creating partitions, I cannot see the partitions.&lt;/p&gt;&#xA;&lt;p&gt;Anyone facing the issues or what could be the issue !&lt;/p&gt;&#xA;" OwnerUserId="14758" LastActivityDate="2021-08-31T10:51:28.547" Title="Elementary os 6 odin installation - no partitions shown after getting current configuration" Tags="|uefi|install|dell|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28683" PostTypeId="2" ParentId="28603" CreationDate="2021-08-31T12:49:39.553" Score="-1" Body="&lt;p&gt;Me2.  Looking for new distro after Mint 20 screwed up samba amd MX cannot handle hot swapping drives.&lt;/p&gt;&#xA;&lt;p&gt;Guess what - it aint going to be elementary if you cannot install it.&lt;/p&gt;&#xA;&lt;p&gt;A lot of modern distros seem to screw up - get back to basics&lt;/p&gt;&#xA;" OwnerUserId="26893" LastActivityDate="2021-08-31T12:49:39.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28685" PostTypeId="1" CreationDate="2021-08-31T13:39:50.473" Score="0" ViewCount="127" Body="&lt;p&gt;I have an installation of Elementary OS working. Now my wifi conncection disapeared, and I do not have cable connection. I tried to pair my iphone to get and internet conection, but without success. I tried bluetooh pair, but nothing. I tried to use recovery mode, nothing (it asks for internet reposistories). I tried to mount the iso installation of Elementary OS as a repository, but have got errors.&lt;/p&gt;&#xA;&lt;p&gt;I've got the wifi card information as&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;usb@1:5 802.11 Realtek wlam adapter&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;In my opinion, Elementary OS is missing an improvement. It's an internet based system, it cannot stay without internet.&lt;/p&gt;&#xA;&lt;p&gt;For an extra information, it's a dual boot system. Internet works perfectly in windows!&lt;/p&gt;&#xA;" OwnerUserId="26827" LastActivityDate="2024-01-20T02:01:20.190" Title="Wifi disappeared" Tags="|wifi|software-installation|bluetooth|repositories|iphone|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28686" PostTypeId="2" ParentId="28610" CreationDate="2021-08-31T15:47:49.380" Score="1" Body="&lt;p&gt;The calculator app is packaged as flatpak, you can run it from terminal with &lt;code&gt;flatpak run io.elementary.calculator&lt;/code&gt;. Run &lt;code&gt;flatpak list&lt;/code&gt; to see the other default flatpak apps which you can run with corresponding command like the calculator.&lt;/p&gt;&#xA;&lt;p&gt;You can also use the same command like in the terminal to make a keyboard shortcut.&lt;/p&gt;&#xA;" OwnerUserId="26897" LastActivityDate="2021-08-31T15:47:49.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28687" PostTypeId="2" ParentId="28631" CreationDate="2021-08-31T15:58:11.170" Score="0" Body="&lt;p&gt;I has similar issue with the power settings, it would hang anytime I tried to get into the subsection from the config panel (switchboard)&lt;/p&gt;&#xA;&lt;p&gt;What worked for me was running switchboard as root from the terminal with &lt;code&gt;sudo io.elementary.switchboard &lt;/code&gt; and configuring it from there. You can try the same thing for the network settings.&lt;/p&gt;&#xA;&lt;p&gt;I think there is a bug with the policykit or something related that requires elevated permissions in the switchboard (network, power, user accounts, etc)&lt;/p&gt;&#xA;" OwnerUserId="26897" LastActivityDate="2021-08-31T15:58:11.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28688" PostTypeId="1" AcceptedAnswerId="28689" CreationDate="2021-08-31T18:05:33.793" Score="0" ViewCount="30" Body="&lt;p&gt;I have had this happened to me twice. I installed the current Odin release and set it up (installed some apps, changed some settings). I also rebooted several times, for example after installing the nvidia-470 drivers.&lt;/p&gt;&#xA;&lt;p&gt;At some point i noticed the rather convoluted hostname and decided to change it with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo hostnamectl set-hostname newhostname&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After that I rebooted and was thrown in the second part of the installer where you need to (again) set your keyboard layout and the create your user account.&lt;/p&gt;&#xA;&lt;p&gt;When I entered my existing account, it said, this account is available (it showed a green checkmark) but when I proceeded to create that user, it complained about the user account already existing.&lt;/p&gt;&#xA;&lt;p&gt;I created a new account and looked around in the system. The home folder of my old account is there, but I can't login with that account. It only shows me the new account.&lt;/p&gt;&#xA;&lt;p&gt;Interestingly, the account page in settings only shows my current account (jonathan), but when I click on &lt;code&gt;Unlock&lt;/code&gt; to change some settings, it shows my old account (inhji) as a choice:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L6IfD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L6IfD.png&quot; alt=&quot;settings app showing missing account in dropdown&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also, if I try to create a new user with the old account name, the user creation window just disappears after clicking on &amp;quot;create user&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Has anyone had this happen to them before?&lt;/p&gt;&#xA;" OwnerUserId="26898" LastEditorUserId="26898" LastEditDate="2021-08-31T18:27:07.507" LastActivityDate="2021-08-31T19:50:17.937" Title="Forced to create a new user account after reboot, Old account is gone?" Tags="|settings|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28689" PostTypeId="2" ParentId="28688" CreationDate="2021-08-31T18:51:26.420" Score="1" Body="&lt;p&gt;Okay, I figured it out.&lt;/p&gt;&#xA;&lt;p&gt;I had set &lt;code&gt;/bin/fish&lt;/code&gt; as my login shell (which does not exist, it's &lt;code&gt;/usr/bin/fish&lt;/code&gt;), which made the user disappear from the login screen and since there was no more user available to login with, it threw me back to the &amp;quot;Create User&amp;quot; part of the installer.&lt;/p&gt;&#xA;" OwnerUserId="26898" LastEditorUserId="26898" LastEditDate="2021-08-31T19:50:17.937" LastActivityDate="2021-08-31T19:50:17.937" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28690" PostTypeId="2" ParentId="3899" CreationDate="2021-08-31T19:01:09.380" Score="0" Body="&lt;p&gt;In the most recent version of Elementary (6, Odin) I installed Steam using the Flatpak version and it worked well. The problem was that when I wanted to use Steam Play (trying to emulate Windows using Proton) my game wouldn't launch (I was trying to play The Secret of Monkey Island Special Edition.&lt;/p&gt;&#xA;&lt;p&gt;It turns out Proton doesn't really play well with the Flatpak version of Steam, so I had to install Steam from the official .deb on &lt;a href=&quot;https://store.steampowered.com/about/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://store.steampowered.com/about/&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Installing via the .deb (I used Eddy) leaves a bunch of dependencies out. Here's what worked for me:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And for the 32-bit drivers&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libc6-i386&#xA;sudo apt-get libgl1:i386 libdrm2:i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I hope this helps anyone trying to install Steam in 2021.&lt;/p&gt;&#xA;" OwnerUserId="6364" LastActivityDate="2021-08-31T19:01:09.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28691" PostTypeId="1" CreationDate="2021-09-01T02:18:55.897" Score="0" ViewCount="113" Body="&lt;p&gt;After the fix of the UEFI problem on the official ElementaryOS 6 ISO, I flashed my USB using Rufus as usual. When booting the machine with that USB I get some random black screens indicating that something has occurred and I can't boot into the OS.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;The image is not corrupted as I used it to create a VM and verified its checksum.&lt;/li&gt;&#xA;&lt;li&gt;I have a Dell Inspiron 15 7000 Gaming and the BIOS is on its last version (currently at 1.14.0).&lt;/li&gt;&#xA;&lt;li&gt;The outputs of the boot are random and are displayed in the images below. (I could only upload one image here, the package containing two images is &lt;a href=&quot;https://i.stack.imgur.com/AtYcv.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;I've tried to burn the ISIO using dd, Etcher and manually coping files over a FAT32 GPT partition.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V4nbg.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V4nbg.jpg&quot; alt=&quot;random 1&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9688" LastEditorUserId="9688" LastEditDate="2021-09-01T05:09:49.660" LastActivityDate="2021-09-01T05:09:49.660" Title="Not being able to boot eOS6 (Odin)" Tags="|boot|release-odin|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28692" PostTypeId="1" CreationDate="2021-09-01T09:22:58.197" Score="-1" ViewCount="116" Body="&lt;p&gt;I decided to try Elementary OS, and I especially liked the following thing: When files are opening with the .flatpakref extension, a certain &amp;quot;software installer&amp;quot; opens, well, so, I liked it very much, and I want this utility to be maintained &lt;code&gt;.deb&lt;/code&gt; packages&lt;/p&gt;&#xA;" OwnerUserId="26904" LastActivityDate="2021-09-04T00:07:31.463" Title="Support .deb files for software installer GUI" Tags="|software-installation|" AnswerCount="3" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28693" PostTypeId="2" ParentId="28692" CreationDate="2021-09-01T11:06:54.090" Score="2" Body="&lt;p&gt;Given the shift away from debs to flatpacks I don't think this will get implemented. But there is &lt;a href=&quot;https://appcenter.elementary.io/com.github.donadigo.eddy/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Eddy&lt;/a&gt;, which seems to be what you are asking for.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps, regards,&lt;br /&gt;&#xA;CK&lt;/p&gt;&#xA;" OwnerUserId="26747" LastEditorUserId="26747" LastEditDate="2021-09-01T12:34:08.497" LastActivityDate="2021-09-01T12:34:08.497" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28694" PostTypeId="2" ParentId="28692" CreationDate="2021-09-01T11:17:42.273" Score="1" Body="&lt;p&gt;@ckruse, I want to make a feature-request. That is, to simply add support for installing deb-packages in this program, because rejecting them sounds too strange: how will they abandon them? We'll have to redo the entire system.&lt;/p&gt;&#xA;" OwnerUserId="26906" LastActivityDate="2021-09-01T11:17:42.273" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28695" PostTypeId="2" ParentId="28685" CreationDate="2021-09-01T17:44:18.727" Score="0" Body="&lt;p&gt;problem solved with a reinstall.&lt;/p&gt;&#xA;&lt;p&gt;To answer your question,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;       description: Wireless interface&#xA;       physical id: 1&#xA;       bus info: usb@1:5&#xA;       logical name: wlx2418c6aee6f4&#xA;       serial: 24:18:c6:ae:e6:f4&#xA;       capabilities: ethernet physical wireless&#xA;       configuration: broadcast=yes driver=rtl8xxxu driverversion=5.11.0-27-generic firmware=N/A ip=192.168.0.13 link=yes multicast=yes wireless=IEEE 802.11```&#xA;&#xA;about the system&#xA;&#xA;```wmoreira@compaq:~$ sudo dmidecode | grep -A3 '^System Information'&#xA;System Information&#xA;    Manufacturer: Compaq&#xA;    Product Name: 420&#xA;    Version: Default string&#xA;&#xA;wmoreira@compaq:~$ sudo lspci&#xA;00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 21)&#xA;00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 21)&#xA;00:13.0 SATA controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SATA Controller (rev 21)&#xA;00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 21)&#xA;00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 21)&#xA;00:1b.0 Audio device: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Definition Audio Controller (rev 21)&#xA;00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 21)&#xA;00:1c.1 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #2 (rev 21)&#xA;00:1c.2 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #3 (rev 21)&#xA;00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 21)&#xA;00:1f.3 SMBus: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx SMBus Controller (rev 21)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I hope this helps to improve the system. Thanks a lot!&lt;/p&gt;&#xA;" OwnerUserId="26827" LastActivityDate="2021-09-01T17:44:18.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28696" PostTypeId="2" ParentId="28630" CreationDate="2021-09-01T20:45:33.600" Score="0" Body="&lt;p&gt;Based on the source, it looks like you might try the b43 driver.&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Specifically, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/11783/elementary-os-on-macbook-wont-display-wifi-settings-how-do-i-fix&quot;&gt;this post&lt;/a&gt; suggests following commands:&lt;/p&gt;&#xA;&lt;p&gt;Remove bcmwl-kernel-source package, then reboot.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge bcmwl-kernel-source&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install b43 broadcom firmware.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reload package.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo modprobe -r b43&#xA;sudo modprobe b43&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-09-01T20:45:33.600" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28698" PostTypeId="1" CreationDate="2021-09-02T09:39:06.870" Score="0" ViewCount="395" Body="&lt;p&gt;I have just &lt;strong&gt;upgraded to Odin&lt;/strong&gt;, and my bluetooth didn't work (stuck in descovering devices), just as the older version had to &lt;strong&gt;install Blueman&lt;/strong&gt; again to make it work, is it some kind of bug? or something I have to fix regarding my hardware? any help will be appreciated , thanks!&lt;/p&gt;&#xA;&lt;p&gt;My bluetooth card is &lt;code&gt;Network controller: Intel Corporation Wireless-AC 9560 [Jefferson Peak]&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="14577" LastEditorUserId="3018" LastEditDate="2021-09-06T13:52:06.487" LastActivityDate="2024-01-26T15:08:11.007" Title="Bluetooth only working with BLUEMAN" Tags="|bluetooth|" AnswerCount="1" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="28699" PostTypeId="1" CreationDate="2021-09-02T12:47:53.423" Score="2" ViewCount="355" Body="&lt;p&gt;can't open my android via pantheon-files, have tried to install go-mtpfs or mtpfs-tools.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5xtYv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5xtYv.png&quot; alt=&quot;MTP errors&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2022-03-05T05:44:52.960" Title="MTP: Unable to show folder" Tags="|pantheon-files|mtp|odin|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28700" PostTypeId="1" CreationDate="2021-09-02T17:32:37.683" Score="0" ViewCount="19" Body="&lt;p&gt;I'd like to make a visualizer in Vala for EOS.&lt;/p&gt;&#xA;&lt;p&gt;The first chunk I'd like to achieve is drawing a rotating red cube.&lt;/p&gt;&#xA;&lt;p&gt;I tried &lt;a href=&quot;https://valadoc.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;valadoc&lt;/a&gt; for &amp;quot;3d&amp;quot; and &amp;quot;gpu&amp;quot; but it only came up with non-contextualized functions; no useful docs.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;So where should I get started?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;What libraries should I know of?  Any links to docs or example projects?&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2021-09-02T17:32:37.683" Title="How can I draw basic 3d with Vala?" Tags="|development|thirdpartyapps|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28701" PostTypeId="1" CreationDate="2021-09-02T23:22:04.733" Score="0" ViewCount="41" Body="&lt;p&gt;I have just finished a fresh install of Odin. Started copying my images to the Pictures directory. When they import into the Photos app it seems to create an event for every picture. As you can see in the screenshot, if there are 16 pictures on a single day it'll create 16 events named for that day and each event has 1 photo in it.&lt;/p&gt;&#xA;&lt;p&gt;I like the fact that it creates date based events from the metadata in the pictures but this doesn't seem usable. There are previous and next buttons but they cannot be used as there is only the single picture in each grouping.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know why it would group them this way and how I could fix it?&lt;/p&gt;&#xA;&lt;p&gt;I'd prefer to actually group them by month automatically instead if possible but even by day would be an improvement.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KM2ew.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KM2ew.png&quot; alt=&quot;Photos issue&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26910" LastActivityDate="2024-01-23T17:03:45.440" Title="Problem using Photos on fresh install" Tags="|photos|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28703" PostTypeId="1" CreationDate="2021-09-03T06:42:46.783" Score="1" ViewCount="16" Body="&lt;p&gt;Is it possible to save workspaces?&#xA;For instance terminal on first, vscode on second, browser on third...&#xA;On power up, I would like to be able to find it the same way it was when powering down&lt;/p&gt;&#xA;" OwnerUserId="26870" LastActivityDate="2021-09-03T06:42:46.783" Title="Saving workspaces" Tags="|workspace|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28705" PostTypeId="1" CreationDate="2021-09-03T09:29:11.487" Score="2" ViewCount="45" Body="&lt;p&gt;I posted this as a &lt;a href=&quot;https://github.com/elementary/os/issues/546&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug report&lt;/a&gt; last week, but I'm also posting here to see if anyone has suggestions for what I can try next. Most of the posts here that describe a similar issue (with Hera, eg. &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/25428/install-issue-black-screen-after-grub-splash-with-elementaryos-5-1-stable-2020/28569#28569&quot;&gt;1&lt;/a&gt;, &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/26719/odin-6-0-not-booting-on-intel-tiger-lake-laptop&quot;&gt;2&lt;/a&gt;) suggest adding &lt;code&gt;nomodeset&lt;/code&gt; to the boot parameters, but that didn't change anything for me with Odin.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;Hardware:&lt;/strong&gt; Dell XPS 9370&#xA;&lt;strong&gt;ISO:&lt;/strong&gt; elementaryos-6.0-stable.20210823.iso&lt;/p&gt;&#xA;&lt;p&gt;I had been affected by the '&lt;a href=&quot;https://github.com/elementary/triage/issues/74&quot; rel=&quot;nofollow noreferrer&quot;&gt;Odin iso fails to boot on lots of Dell hardware&lt;/a&gt;' issue, but with the &lt;a href=&quot;https://github.com/elementary/triage/issues/74#issuecomment-905901872&quot; rel=&quot;nofollow noreferrer&quot;&gt;updated iso&lt;/a&gt;, the installation medium was finally accessible in the BIOS &lt;/p&gt;&#xA;&lt;p&gt;However, when I get to the &lt;code&gt;try or install elementary OS&lt;/code&gt; screen, and either hit Enter, or wait for the &lt;code&gt;booting in...&lt;/code&gt; countdown to finish, the screen goes blank. The keyboard is backlit, the fans are whirring away like they're doing something, but there's no operating system being booted, no matter how long I wait or which keys I mash at random.&lt;/p&gt;&#xA;&lt;p&gt;The iso checksum is valid, and the issue is the same across different installation media and I've since tested and installed Solus, then Ubuntu 20.04.03 LTS without any issues so it doesn't appear to be with my hardware, or something I'm doing wrong..?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Does anyone here have ideas for what I could try? I really want to get back on elementary, but I don't want to admit defeat and just re-install elementary OS Hera!&lt;/p&gt;&#xA;" OwnerUserId="11723" LastActivityDate="2021-09-03T09:29:11.487" Title="Odin installer goes black after 'try or install elementary'" Tags="|system-installation|boot|grub|release-odin|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28707" PostTypeId="1" AcceptedAnswerId="28728" CreationDate="2021-09-03T12:29:41.960" Score="0" ViewCount="56" Body="&lt;p&gt;I have installed Dropbox through the app store of elementary os in 5.1 Hera (Laptop) and 6.0 Odin (PC). &lt;strong&gt;Dropbox syncing isn't working automatically or lately.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I would like to have an icon of Dropbox in the Wingpanel and have it display the current status (updated, synchronizing, offline).&lt;/p&gt;&#xA;&lt;p&gt;Kindly help.&lt;/p&gt;&#xA;" OwnerUserId="26918" LastActivityDate="2021-09-05T17:11:05.317" Title="Dropbox syncing isn't working automatically or lately on my Elementary OS 6 and 5.1" Tags="|elementary-project|dropbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28708" PostTypeId="2" ParentId="28660" CreationDate="2021-09-03T17:23:31.673" Score="1" Body="&lt;p&gt;You can try this: &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26919" LastActivityDate="2021-09-03T17:23:31.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28711" PostTypeId="1" CreationDate="2021-09-03T18:40:38.173" Score="0" ViewCount="40" Body="&lt;p&gt;Computer shutdown fine, but after shutdown computer comes in to a limbo state. It it will not boot. Only showing a black screen. Holding down power button for four seconds and start computer again. Grub menu comes up. One can select Elementy OS and computer boots fine. I am using Elementaty os version 6 with updates.&lt;/p&gt;&#xA;" OwnerUserId="26922" LastActivityDate="2024-01-24T05:06:20.763" Title="Limbo state shutdown or reboot" Tags="|boot|grub|shutdown|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28712" PostTypeId="2" ParentId="11840" CreationDate="2021-09-04T00:01:19.667" Score="0" Body="&lt;p&gt;I had the same problem istalling version 6. In my case is was a bios error that caused the the isuse. Check if you have ACPI options that you can disable during build installation. In my case it solved the problem.&lt;/p&gt;&#xA;" OwnerUserId="26922" LastActivityDate="2021-09-04T00:01:19.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28713" PostTypeId="2" ParentId="28692" CreationDate="2021-09-04T00:07:31.463" Score="0" Body="&lt;p&gt;Try to install the software you want with &amp;quot;apt install&amp;quot; option. I found all software I needed that way without needing to manage any extra tool to manage deb files. Firefox, Kmail, VLC, Double Commander and Thunderbird and office software. I also tested dpkg and it also worked fine. Maybe not the the answer you wanted, but very easy to use.&lt;/p&gt;&#xA;" OwnerUserId="26922" LastActivityDate="2021-09-04T00:07:31.463" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28715" PostTypeId="1" CreationDate="2021-09-04T10:01:02.183" Score="0" ViewCount="35" Body="&lt;p&gt;I just installed a fresh copy of ElementaryOS, and shortly after i did i get my / filesystem filled with large syslog and syslog.1 files the log files are filled with this entry&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.w[1638]: g_bytes_get_data: assertion 'bytes != NULL' failed&#xA;io.elementary.w[1638]: ((libnm-core/nm-utils.c:559)): assertion '&amp;lt;dropped&amp;gt;' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Currently i clear the log with cat /dev/null &amp;gt; /var/log/syslog but i'm wondering how can i fix this error in the log files&lt;/p&gt;&#xA;&lt;p&gt;Here is the output of lshw -c network&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; *-network                 &#xA;       description: Ethernet interface&#xA;       product: RTL810xE PCI Express Fast Ethernet controller&#xA;       vendor: Realtek Semiconductor Co., Ltd.&#xA;       physical id: 0&#xA;       bus info: pci@0000:01:00.0&#xA;       logical name: enp1s0&#xA;       version: 07&#xA;       serial: 74:86:7a:5b:0e:a6&#xA;       capacity: 100Mbit/s&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation&#xA;       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.11.0-27-generic firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes port=twisted pair&#xA;       resources: irq:18 ioport:4000(size=256) memory:c0700000-c0700fff memory:c0400000-c0403fff&#xA;  *-network&#xA;       description: Wireless interface&#xA;       product: QCA9565 / AR9565 Wireless Network Adapter&#xA;       vendor: Qualcomm Atheros&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wlp2s0&#xA;       version: 01&#xA;       serial: 34:23:87:16:18:3b&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless&#xA;       configuration: broadcast=yes driver=ath9k driverversion=5.11.0-27-generic firmware=N/A ip=192.168.100.200 latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:19 memory:c0600000-c067ffff memory:c0680000-c068ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And here is lscpi&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)&#xA;00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)&#xA;00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)&#xA;00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)&#xA;00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)&#xA;00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)&#xA;00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)&#xA;00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)&#xA;00:1c.4 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 5 (rev e4)&#xA;00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)&#xA;00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)&#xA;00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)&#xA;00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)&#xA;01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller (rev 07)&#xA;02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)&#xA;03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus PRO [Radeon HD 8850M / R9 M265X]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;My laptop model is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Manufacturer: Dell Inc.&#xA;Product Name: Inspiron 5537&#xA;Version: A08&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;OS&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS 6 Odin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26927" LastEditorUserId="26927" LastEditDate="2021-09-05T05:05:32.600" LastActivityDate="2021-09-05T05:05:32.600" Title="Syslog is filling up the entire disk space with those entries" Tags="|drivers|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28716" PostTypeId="2" ParentId="28593" CreationDate="2021-09-04T13:55:30.543" Score="0" Body="&lt;p&gt;The problem got fixed with this &lt;a href=&quot;https://github.com/elementary/appcenter/pull/1581&quot; rel=&quot;nofollow noreferrer&quot;&gt;PR&lt;/a&gt;. Just had to reinstall nvidia drivers from appcenter. Works perfectly on each boot now :)&lt;/p&gt;&#xA;" OwnerUserId="26794" LastActivityDate="2021-09-04T13:55:30.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28717" PostTypeId="2" ParentId="28699" CreationDate="2021-09-04T16:09:20.690" Score="1" Body="&lt;p&gt;Looks like this is a regression due to a major re-write of the sidebar code. There is an issue report already here: &lt;a href=&quot;https://github.com/elementary/files/issues/1781&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1781&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There is a PR awaiting review and approval here: &lt;a href=&quot;https://github.com/elementary/files/pull/1752&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/pull/1752&lt;/a&gt; which seems to fix this issue although that was its main aim.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-09-04T16:09:20.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28718" PostTypeId="1" CreationDate="2021-09-04T16:19:52.200" Score="0" ViewCount="27" Body="&lt;p&gt;I noticed that external drives (at least the ones I'm using) show up twice after mounting. When they are not mounted it's showing just once. Is this happening to someone else too?&lt;/p&gt;&#xA;&lt;p&gt;Regards,&lt;/p&gt;&#xA;&lt;p&gt;BootZ&lt;/p&gt;&#xA;" OwnerUserId="25694" LastActivityDate="2024-01-25T16:08:16.010" Title="USB drives show up twice in files (eOS 6)" Tags="|files|usb|mount|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28719" PostTypeId="1" CreationDate="2021-09-04T17:28:39.463" Score="0" ViewCount="73" Body="&lt;p&gt;Ever since I used the elementary os hera and now EOS Odin I have had problems with the sound the microphone doesn't work at all and the speakers too. please help. I am using an HP Specter X360 laptop&#xA;Sound Intel® Smart Sound Technology. TNX&lt;/p&gt;&#xA;&lt;p&gt;Now I use Windows 11 Pro so i cant do terminal&#xA;Speecy:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Audio  &#xA;    Sound Card  &#xA;        Intel Smart Sound Technology  &#xA;    Playback Device  &#xA;        Speakers (Intel Smart Sound Technology)  &#xA;    Recording Device  &#xA;        Microphone (Intel Smart Sound Technology)   &#xA;&#xA;Operating System  &#xA;    Windows 11 Pro 64-bit  &#xA;CPU  &#xA;    Intel Core i7 5500U @ 2.40GHz   41 °C  &#xA;    Broadwell-U 14nm Technology  &#xA;RAM  &#xA;    8,00GB Dual-Channel DDR3 (12-15-15-34)  &#xA;Motherboard    &#xA;    Hewlett-Packard 802D (SOCKET 0)  &#xA;Graphics  &#xA;    Generic PnP Monitor (2560x1440@60Hz)  &#xA;    Intel HD Graphics 5500 (HP)  &#xA;Storage  &#xA;    476GB MTFDDAV512TBN-1AR1ZABHA (SATA (SSD))  36 °C  &#xA;Optical Drives  &#xA;    No optical disk drives detected  &#xA;Audio  &#xA;    Intel Smart Sound Technology&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26928" LastEditorUserId="3018" LastEditDate="2021-09-08T19:16:42.797" LastActivityDate="2021-09-08T19:16:42.797" Title="Sound PROBLEM HP Spectre x360" Tags="|sound|odin|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28720" PostTypeId="1" CreationDate="2021-09-04T21:00:35.907" Score="0" ViewCount="91" Body="&lt;p&gt;I have an older 27&amp;quot; Intel iMac that worked just fine under Elementary OS 5, although the wireless internet did not work until after I performed the first set of updates.&lt;/p&gt;&#xA;&lt;p&gt;Now, after wiping our the system and installing Elementary OS 6, even after installing all available updates, the wireless internet options is simply not available! The nly way I can use the internet is if I add an ethernet cable between the iMac and the router!&lt;/p&gt;&#xA;&lt;p&gt;Furthermore, there is no longer and &amp;quot;about&amp;quot; link in the System Settings area!&lt;/p&gt;&#xA;&lt;p&gt;Is support for the wireless in this older iMac now dropped? Or is there some other step or steps I need to go through to get the wireless internet to work?&lt;/p&gt;&#xA;" OwnerUserId="8622" LastActivityDate="2021-09-04T21:00:35.907" Title="Does Elementary OS 6 still support the same older hardware?" Tags="|wifi|release-odin|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28722" PostTypeId="1" AcceptedAnswerId="28723" CreationDate="2021-09-05T04:15:47.473" Score="0" ViewCount="1270" Body="&lt;p&gt;Is there a mirror site for elementary OS .iso image file?&lt;/p&gt;&#xA;&lt;p&gt;I tried to download elementary OS .iso installation image file but it was too slow. So I wonder if there is a mirror site near me for elementary OS. I searched the web but couldn't find one.&lt;/p&gt;&#xA;&lt;p&gt;Can anyone please help me find a mirror site? Thanks a lot.&lt;/p&gt;&#xA;&lt;p&gt;Note that I do not want to use tools like Motrix(based on aria2) to speed up the download because it is considered as not safe enough.&lt;/p&gt;&#xA;&lt;p&gt;It would be better if elementary OS could have mirror sites around the world just like other successful Linux versions.&lt;/p&gt;&#xA;" OwnerUserId="26930" LastActivityDate="2021-09-05T05:48:45.013" Title="Is there a mirror site for elementary os?" Tags="|system-installation|download|iso|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28723" PostTypeId="2" ParentId="28722" CreationDate="2021-09-05T05:48:45.013" Score="1" Body="&lt;p&gt;There no &lt;em&gt;verified&lt;/em&gt; mirrors for the ISO files, but you can download the image via the BitTorrent protocol using the Magnet link:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/9Xf8T.jpg&quot; alt=&quot;Click the U&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Simply click on the “U”, and this will open the appropriate application, connect you to several peers with relatively good upload speeds.&lt;/p&gt;&#xA;&lt;p&gt;After downloading, be sure to &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;verify your download&lt;/a&gt;. So long as everything is good, you should see the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;SHA256 hash of Downloads\elementaryos-6.0-stable.20210831.iso:&#xA;60bbaca60d8dbf9f5f112ade2ee5924af976ba01ce19e53e871c8deced7ae884&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-05T05:48:45.013" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28724" PostTypeId="1" CreationDate="2021-09-05T09:18:26.177" Score="1" ViewCount="119" Body="&lt;p&gt;Keyboard calculator shortcut don't works with eOS 6 Odin.&lt;/p&gt;&#xA;&lt;p&gt;I opened a issue on the app's Github but it doesn't depend on it.&#xA;Comments can help to find a solution : &lt;a href=&quot;https://github.com/elementary/calculator/issues/200&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/calculator/issues/200&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26931" LastActivityDate="2021-09-10T18:27:36.833" Title="Calculator keyboard shortcut" Tags="|keyboard-shortcuts|gnome|calculator|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28725" PostTypeId="2" ParentId="6676" CreationDate="2021-09-05T11:54:49.737" Score="0" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade -y&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install -y ubuntu-desktop gnome gnome-shell&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="26934" LastActivityDate="2021-09-05T11:54:49.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28726" PostTypeId="1" CreationDate="2021-09-05T11:57:13.977" Score="0" ViewCount="22" Body="&lt;p&gt;At startup today I noticed on the latest version of Odin (stable) that the &amp;quot;share&amp;quot; panel is no longer present.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="26933" LastActivityDate="2021-09-05T11:57:13.977" Title="Odin the &quot;share&quot; config panel has disappeared" Tags="|odin|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28727" PostTypeId="2" ParentId="28701" CreationDate="2021-09-05T14:42:36.613" Score="0" Body="&lt;p&gt;I agree this is a little weird import behavior. But you can select all of those images and then right click, and then you can select &amp;quot;Merge Event&amp;quot;. This will group all of the photos into a single event.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-09-05T14:42:36.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28728" PostTypeId="2" ParentId="28707" CreationDate="2021-09-05T17:11:05.317" Score="0" Body="&lt;p&gt;To help with the automatic syncing, you can have Dropbox launch at startup. After installing Dropbox from AppCenter (which installs it from the Flathub repository), go to System Settings &amp;gt; Applications &amp;gt; Startup, and then add Dropbox to this list.&lt;/p&gt;&#xA;&lt;p&gt;Since launch at startup is not set by default, the Dropbox folders only sync when the Dropbox application is launched with the default settings.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-09-05T17:11:05.317" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28729" PostTypeId="1" CreationDate="2021-09-05T20:32:14.300" Score="0" ViewCount="33" Body="&lt;p&gt;Coming from OSX - and very frustrated at Apple due the bad quality of their recent product -, I just moved to elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;I find the touchpad two finger scrolling (killer app for me) hard to use on my HP245 G8.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;there is some kind of lag before it starts to scroll (or you can simply do a light two-finger scroll and nothing happens)&lt;/li&gt;&#xA;&lt;li&gt;once it start to scroll, this is way to fast.&#xA;This is very far from the feel in OSX. I don't know how much relates to hw vs sw.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Are there any variables exposed to control this ?&lt;/p&gt;&#xA;" OwnerUserId="26935" LastActivityDate="2021-09-06T06:19:14.687" Title="ODIN - Touchpad two finger scrolling hard to use" Tags="|touchpad|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28730" PostTypeId="2" ParentId="28729" CreationDate="2021-09-05T22:31:51.243" Score="1" Body="&lt;p&gt;There are some settings available for the touchpad, though a lot of the responsiveness is controlled by the hardware itself. That said, take a look at some of the items in the Touchpad section of &amp;quot;Mouse &amp;amp; Touchpad&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/tDJoP.png&quot; alt=&quot;Mouse &amp;amp; Touchpad — Touchpad&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;I do not have an HP nearby to test this with but, on a particularly sluggish Fujitsu, I found touch responsiveness to be better when &amp;quot;Ignore While Typing&amp;quot; was disabled. So long as your touchpad isn't as large as what one would find on a modern Apple notebook, this &lt;em&gt;may&lt;/em&gt; do the trick for you. The only downside is that a random palm touch when hitting the spacebar will cause the cursor to change location ... and possibly result in some cursing.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-05T22:31:51.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28731" PostTypeId="2" ParentId="28711" CreationDate="2021-09-05T23:15:08.190" Score="0" Body="&lt;p&gt;That was my first go to when it occurred. Nothing out of the ordinary, what I can see. I was expecting something.&lt;/p&gt;&#xA;" OwnerUserId="26922" LastActivityDate="2021-09-05T23:15:08.190" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28736" PostTypeId="1" CreationDate="2021-09-06T11:34:03.617" Score="1" ViewCount="66" Body="&lt;p&gt;After installing EOS 6 (Odin), there is no longer an 'About' panel in the Systems Settings. Is this omitted deliberately? Or am I missing some step to enable it?&lt;/p&gt;&#xA;" OwnerUserId="8622" LastActivityDate="2024-03-15T21:04:00.427" Title="Odin (Elementary OS 6) System Settings &gt; About missing?" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28737" PostTypeId="1" CreationDate="2021-09-06T12:30:44.820" Score="0" ViewCount="318" Body="&lt;p&gt;It is not available via the AppCenter, and installing it manually results in an app that asks for authentication and then exits.&lt;/p&gt;&#xA;&lt;p&gt;I wanted to use Synaptic to install Steam, as I had under Elementary OS 5.&lt;/p&gt;&#xA;" OwnerUserId="8622" LastActivityDate="2021-09-14T22:05:11.417" Title="Odin cannot add Synaptic Package Manager or Steam" Tags="|applications|appcenter|release-odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28739" PostTypeId="1" CreationDate="2021-09-06T16:01:31.383" Score="1" ViewCount="69" Body="&lt;p&gt;When I install from flathub.org a couple of software like LibreOffice, GIMP, Krita, etc.. I switch account to second non-admin user and cant found it on this another user OS account.&#xA;How to install flatpak software for all elementary OS users?&lt;/p&gt;&#xA;" OwnerUserId="26940" LastActivityDate="2021-09-06T16:01:31.383" Title="Share installed flatpack soft to all OS users" Tags="|software-installation|flatpak|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28741" PostTypeId="2" ParentId="28630" CreationDate="2021-09-06T20:28:04.763" Score="0" Body="&lt;p&gt;I finally make it work,&lt;/p&gt;&#xA;&lt;p&gt;uninstall all drivers for a fresh install&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get purge b43-fwcutter firmware-b43-installer firmware-b43-lpphy-installer firmware-b43legacy-installer bcmwl*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;re install only this ones&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install firmware-b43-installer b43-fwcutter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;after that remove or comment the blacklisted kernel module &lt;code&gt;bcm43xx&lt;/code&gt; in the file /etc/modprobe.d/blacklist.conf. You can do it manually or with this command&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;keyword='blacklist bcm43xx'; sudo sed -i &amp;quot;/^$keyword/ c#$keyword&amp;quot; blacklist.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26838" LastActivityDate="2021-09-06T20:28:04.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28742" PostTypeId="1" AcceptedAnswerId="28754" CreationDate="2021-09-06T22:47:50.880" Score="1" ViewCount="458" Body="&lt;p&gt;I have been using Elementary OS Odin for about a week. Several days ago I couldn't connect to the internet and pinging a domain name yielded the &amp;quot;Temporary failure in name resolution&amp;quot; error. As per the advice of many people on Stack Exchanging and elsewhere I manually altered &lt;code&gt;/etc/resolv.conf&lt;/code&gt; to show:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;nameserver 1.1.1.1&#xA;nameserver 8.8.8.8&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And wrote &lt;code&gt;dns=none&lt;/code&gt; under &lt;code&gt;[main]&lt;/code&gt; in &lt;code&gt;/etc/NetworkManager/NetworkManager.conf&lt;/code&gt;. This solved my problem.&lt;/p&gt;&#xA;&lt;p&gt;Howeve, when starting my computer yesterday I once again couldn't connect to the internet and pinging a domain name again yielded the same error. The files mentioned above had not been modified in any way and still appeared as I wrote them.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Here are all the additional things I have looked into in the hopes of resolving the error (or at least seeing what would happen):&lt;/p&gt;&#xA;&lt;p&gt;My datetime is correct.&lt;/p&gt;&#xA;&lt;p&gt;I am connected to the WiFi network.&lt;/p&gt;&#xA;&lt;p&gt;All code in&lt;code&gt;systemd/networks.conf&lt;/code&gt; is commented out.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;nsswitch.conf&lt;/code&gt; appears exactly as it does &lt;a href=&quot;https://linuxconfig.net/manuals/howto/unix-file-etc-hosts-and-etc-nsswitch-conf.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I undid the initial actions described in the first section.&lt;/p&gt;&#xA;&lt;p&gt;I successfully temporarily disabled IPV6 as described &lt;a href=&quot;https://askubuntu.com/a/1303638/1418904&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I ran the commands from the firewall section of &lt;a href=&quot;https://www.tecmint.com/resolve-temporary-failure-in-name-resolution/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this article&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I added one of Google Public DNS IPV6 addresses to &lt;code&gt;/etc/resolved.conf&lt;/code&gt; (while IPV6 was enabled).&lt;/p&gt;&#xA;&lt;p&gt;Nothing resolved the error. Several times during this process the wireless section of my Network Manager GUI completely disappeared. I could not determine why. Rebooting restored it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Edits as per matigo's comment&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;systemd-resolve --status | grep Current&lt;/code&gt; yielded:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Current DNS Server: 1.1.1.1&#xA;       Current Scopes: DNS&#xA;       Current Scopes: DNS&#xA;       Current Scopes: none&#xA;       Current Scopes: none&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;ping -c 2 1.1.1.1&lt;/code&gt; yielded:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;PING 1.1.1.1 (1.1.1.1)  56(84) bytes of data&#xA;&#xA;--- 1.1.1.1 ping statistics ---&#xA;2 packets transmitted, 0 received, 100% packet loss, time 1028ms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;dig @1.1.1.1 elementaryos.stackexchange.org&lt;/code&gt; yielded:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;;&amp;lt;&amp;lt;&amp;gt;&amp;gt; DiG 9.16.1-Ubuntu &amp;lt;&amp;lt;&amp;gt;&amp;gt; @1.1.1.1 elementaryos.stack exchange.com&#xA;;(1 server found)&#xA;;; global options: +cmd&#xA;;; connection timed; no servers could be reached&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;resolvectl query elementaryos.stack exchange.com&lt;/code&gt; yielded:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementaryos.stack exchange.com: resolve call failed: All attempts to contact name servers of networks failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26942" LastEditorUserId="26942" LastEditDate="2021-09-08T01:59:05.187" LastActivityDate="2021-09-09T02:40:49.537" Title="My temporary failure in name resolution error returned even after manually configuring /etc/resolv.conf" Tags="|command-line|odin|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28743" PostTypeId="2" ParentId="28093" CreationDate="2021-09-07T00:14:05.213" Score="0" Body="&lt;p&gt;I imported my photos using the gear icon on the far top right, 'Import Photos'. It sorta worked... It seemed to only get the month of April's photos for each year. Also the program seems to be crashing as soon as it loads occasionally.&lt;/p&gt;&#xA;&lt;p&gt;Keep good backups until all this is sorted out.&lt;/p&gt;&#xA;" OwnerUserId="26944" LastActivityDate="2021-09-07T00:14:05.213" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28746" PostTypeId="1" CreationDate="2021-09-07T03:59:10.100" Score="2" ViewCount="486" Body="&lt;p&gt;The dropbox icon is missing from the wing panel (system tray) in Elementary OS Odin. I got it working barely in Hera using solutions on this website but with glitchy UI. Has anyone successfully found a solution to this problem? This is the only thing standing between me and elementary OS Odin. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="26943" LastActivityDate="2021-09-27T19:48:12.020" Title="Dropbox icon missing in Elementary OS Odin" Tags="|wingpanel|release-odin|odin|dropbox|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28747" PostTypeId="1" CreationDate="2021-09-07T06:11:56.353" Score="0" ViewCount="77" Body="&lt;p&gt;I am using an Lenovo Legion 5 with an AMD Ryzen 7 5800H and a NVIDIA 3060. When I suspend my laptop, either through systemctl, the wingpanel button, closing the laptop or pressing the powerbutton, it suspends. When I then resume the laptop, it has no backlight. When I connect an external monitor that runs just fine, it's just the laptop screen.&lt;/p&gt;&#xA;&lt;p&gt;So I've tried a bunch of things and I am running out things to try:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Switched in BIOS to discrete mode for gpu.&lt;/li&gt;&#xA;&lt;li&gt;Reinstalled drivers, I tried 460, 470 and 460-server (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/14211/black-screen-after-wake-up-from-suspend-mode&quot;&gt;Black screen after wake up from suspend mode&lt;/a&gt;).&lt;/li&gt;&#xA;&lt;li&gt;I tried changing kernels, by default it was 5.12 and I also tried 5.14 when I read that 5.12 sometimes has issues.&lt;/li&gt;&#xA;&lt;li&gt;Tried various values for GRUB_CMDLINE_LINUX_DEFAULT in /etc/default/grub.&lt;/li&gt;&#xA;&lt;li&gt;Tried messing with nvidia services for 470 (&lt;a href=&quot;https://forums.developer.nvidia.com/t/fixed-suspend-resume-issues-with-the-driver-version-470/187150&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.developer.nvidia.com/t/fixed-suspend-resume-issues-with-the-driver-version-470/187150&lt;/a&gt;)&lt;/li&gt;&#xA;&lt;li&gt;Tried a GDM3 as a display manager.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;None of these solved the issue. I really don't know what to do anymore, any and all help would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="26945" LastActivityDate="2021-09-07T10:39:52.157" Title="Odin - No backlight after suspend" Tags="|suspend|nvidia|release-odin|amd|backlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28748" PostTypeId="2" ParentId="28747" CreationDate="2021-09-07T10:39:52.157" Score="1" Body="&lt;p&gt;I was able to fix it after all. Updating to kernel 5.14 broke my trackpad, whilst trying to fix that I came across this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.reddit.com/r/linux_gaming/comments/mmptqi/lenovo_legion_5_ubuntu_2004_final_guide_dream/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/linux_gaming/comments/mmptqi/lenovo_legion_5_ubuntu_2004_final_guide_dream/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Following that guide fixed all my issues.&lt;/p&gt;&#xA;" OwnerUserId="26945" LastActivityDate="2021-09-07T10:39:52.157" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28749" PostTypeId="2" ParentId="28718" CreationDate="2021-09-07T12:47:34.877" Score="0" Body="&lt;p&gt;It's being discussed on github (very confusing all these places where we can file bugs or answer questions) &lt;a href=&quot;https://github.com/elementary/files/issues/1665&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues/1665&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25694" LastActivityDate="2021-09-07T12:47:34.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28750" PostTypeId="1" CreationDate="2021-09-07T21:29:43.887" Score="0" ViewCount="179" Body="&lt;p&gt;I'm trying to install eOS 6.0, on an external HDD. I've created the partitions correctly, but later when it is installing it, this error shows up. This is my first OS installation proccess, so I really don't know what's wrong, but after some research, it should be that my disk is MBR (?). So, now i'm converting the drive from MBR to GPT. But - is this error caused by another problem? Should I convert it anyways and try again?&lt;/p&gt;&#xA;&lt;p&gt;P.S: I don't know if this is helpful, but for the partitions, I've managed to create one for boot, root and home (no swap), and I think they're correct because now booting from Windows using Disk Manager I can see them.&lt;/p&gt;&#xA;&lt;p&gt;This is the error:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kdigE.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kdigE.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm sorry if it is something simple I'm missing, hah.&lt;/p&gt;&#xA;" OwnerUserId="26954" LastEditorUserId="26954" LastEditDate="2021-09-08T00:08:13.783" LastActivityDate="2021-09-08T00:08:13.783" Title="Install error: partition validation" Tags="|system-installation|microsoft-windows|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28751" PostTypeId="1" CreationDate="2021-09-07T22:29:46.630" Score="0" ViewCount="572" Body="&lt;p&gt;I am trying to install Elementary OS, the image is correct, but every time the installation freezes at 35 percent.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/AYe91.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AYe91.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26955" LastActivityDate="2024-02-14T16:08:05.950" Title="Why does elementary OS installation hang at 35%?" Tags="|install|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28752" PostTypeId="1" AcceptedAnswerId="28755" CreationDate="2021-09-07T23:37:09.880" Score="0" ViewCount="34" Body="&lt;p&gt;Installed Dolphin from the App Store, like that split plane feature. Alas I cannot seem to access mounted SSH devices from my local network.  Probably something very obvious?&lt;/p&gt;&#xA;" OwnerUserId="4142" LastActivityDate="2021-09-08T02:11:28.340" Title="Why cant Dolphin FM access, browse mounted SSH shares" Tags="|pantheon-files|ssh|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28753" PostTypeId="1" AcceptedAnswerId="28836" CreationDate="2021-09-08T01:14:06.953" Score="0" ViewCount="70" Body="&lt;p&gt;After a recent update to the kernel headers (I believe), the system cannot boot correctly off the newest initrd iamge (5.11.0-34). It can still boot if I go into the advanced options in GRUB and select (5.11.0-27). The boot up screen just spins, and if I hit escape I see an error message to the effect of being unable to find the &amp;quot;data&amp;quot; volume/volume group.&lt;/p&gt;&#xA;&lt;p&gt;I have already tried recreating the initrd image and updating the grub configuration with update-initramfs and update-grub.&lt;/p&gt;&#xA;" OwnerUserId="26956" LastActivityDate="2021-09-16T00:43:25.277" Title="Unable to boot on newest kernel-headers, can't find data volume" Tags="|boot|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28754" PostTypeId="2" ParentId="28742" CreationDate="2021-09-08T01:47:40.230" Score="0" Body="&lt;p&gt;The error was resolved by turning off the kill switch in Proton VPN.  &lt;a href=&quot;https://github.com/ProtonVPN/linux-app/issues/20&quot; rel=&quot;nofollow noreferrer&quot;&gt;Apparently&lt;/a&gt; this is caused by the IPV6 leak interface getting left in place if the system is shut down while the VPN is connected with kill switch on. This will persist until the kill switch is turned off or the VPN disconnected and reconnected.  This is a known bug that should be addressed at some point.&lt;/p&gt;&#xA;" OwnerUserId="26942" LastEditorUserId="26942" LastEditDate="2021-09-09T02:40:49.537" LastActivityDate="2021-09-09T02:40:49.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28755" PostTypeId="2" ParentId="28752" CreationDate="2021-09-08T02:11:28.340" Score="0" Body="&lt;p&gt;This is due to access permissions. Flatpak installations do not have complete access to your system, so you need to explicitly grant permissions. Fortuntaely, it's not too difficult.&lt;/p&gt;&#xA;&lt;p&gt;To give any software you've installed from the App Store permission to access a file location, do this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Grant permission:&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak override &amp;lt;package_name_here&amp;gt; --filesystem=&amp;lt;path_here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; If you have a path with spaces or special characters, be sure to wrap the &lt;code&gt;&amp;lt;path_here&amp;gt;&lt;/code&gt; value like &lt;code&gt;&amp;quot;&amp;lt;path_here&amp;gt;&amp;quot;&lt;/code&gt;.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Later, if you need to remove access to a location, use the &lt;code&gt;--nofilesystem&lt;/code&gt; option to remove permissions:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open terminal.&lt;/li&gt;&#xA;&lt;li&gt;Revoke permission:&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak override &amp;lt;package_name_here&amp;gt; --nofilesystem=&amp;lt;path_here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If you would like to know more about the different options that are available for App Store-installed app permissions, &lt;a href=&quot;https://docs.flatpak.org/en/latest/sandbox-permissions.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;you can read about the Flatpak sandbox here&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-08T02:11:28.340" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28756" PostTypeId="2" ParentId="28698" CreationDate="2021-09-08T08:16:35.740" Score="0" Body="&lt;p&gt;Possible solutions:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1. HWE kernel with updated drivers:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Since your hardware is quite recent I recommend installing HWE kernels. They have more updated drivers. `sudo apt install --install-recommends linux-generic-hwe-20.04.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi#about_dual-boot_with_windows_and_fast-boot_enabled&quot; rel=&quot;nofollow noreferrer&quot;&gt;2. Disabling fastboot if you dualboot with windows&lt;/a&gt;&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;You need to go to your Windows system and then “Control Panel→Hardware and Sound→Power Options→System Settings”. Select “Chooose what the power buttons do” to access the System Settings from the Power Options. Then disable the “Fast Startup” option in “Shutdown Settings”. This will cause Windows to fully shutdown and may solve the issue.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3. Restarting the module&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;With &lt;code&gt;sudo rmmod btusb &amp;amp;&amp;amp; sudo modprobe btusb&lt;/code&gt;. If after a reboot the bluetooth module stops working again, it is necessary to enable the systemd service.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-09-08T08:16:35.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28757" PostTypeId="1" CreationDate="2021-09-08T09:35:57.110" Score="0" ViewCount="20" Body="&lt;p&gt;I am using this chip and this is the reason I am not using linux i tried this on Ubuntu/Elementry OS / Zorin OS but it does not work.&lt;/p&gt;&#xA;&lt;p&gt;If CSR 4.0 Is supported in Elementry OS it would be really cool.&lt;/p&gt;&#xA;&lt;p&gt;This is the Chip/Dongle.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/MbRxp.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MbRxp.jpg&quot; alt=&quot;CSR 4.0 Chip&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="26957" LastActivityDate="2021-09-08T09:35:57.110" Title="Does CSR 4.0 Bluetooth Chip Works in Elementry OS?" Tags="|bluetooth|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28759" PostTypeId="1" CreationDate="2021-09-08T11:43:51.727" Score="0" ViewCount="164" Body="&lt;p&gt;I am pretty a newbie in the linux word but I have been using elementary os for about one year. I recently installed Elementary os 6 (I am late, I know) but I've an issue with Timeshift that I am not able to solve.&#xA;I used Timeshift on my previous version of elementary in order to have a backup of the system (along with deja dups to backup the file), the problem is that on elementary 6 timeshift doesn't work: when I open the application it asks me for authentication but after I enter the password the application just doesn't open.&lt;/p&gt;&#xA;&lt;p&gt;If I try to open it from the terminal i get the following message:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/RmCIM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RmCIM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your help!&lt;/p&gt;&#xA;" OwnerUserId="26959" LastActivityDate="2021-09-08T11:43:51.727" Title="Timeshift doesn't work on elementary os 6" Tags="|release-odin|backup|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28760" PostTypeId="2" ParentId="28200" CreationDate="2021-09-08T14:24:03.393" Score="1" Body="&lt;p&gt;If you are on elementary OS 6 you should NOT install elementary-tweaks. The correct tool is now called &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks/&quot; rel=&quot;nofollow noreferrer&quot;&gt;pantheon-tweaks&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To install it, follow the instructions on their github repo:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y software-properties-common&#xA;sudo add-apt-repository -y ppa:philip.scott/pantheon-tweaks&#xA;sudo apt install -y pantheon-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now, there should be a &amp;quot;Tweaks&amp;quot; section in System Settings.&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2021-09-08T14:24:03.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28761" PostTypeId="1" AcceptedAnswerId="28765" CreationDate="2021-09-08T15:00:14.697" Score="0" ViewCount="56" Body="&lt;p&gt;I have recently installed the new Elementary OS 0.6 on my laptop and PC. Before I had Kubuntu 18.04 installed on the laptop, and Elementary 0.4 on the PC.&lt;/p&gt;&#xA;&lt;p&gt;In both computers, the USB ports &lt;em&gt;&lt;strong&gt;didn't&lt;/strong&gt;&lt;/em&gt; power off on suspension, however, after the Odin install the USB ports tend to power off, forcing me to unplug and plug the USB peripherals in order to get these working again.&lt;/p&gt;&#xA;&lt;p&gt;This wasn't a problem on a previous version and a similar OS, but it does happen on the current version on both computers.&lt;/p&gt;&#xA;&lt;p&gt;Is it a change in the Ubuntu 20.04 base, or something connected to elementary OS Odin?&lt;/p&gt;&#xA;" OwnerUserId="22522" LastActivityDate="2021-09-08T19:01:31.680" Title="Keep USB ports powered when suspended" Tags="|suspend|release-odin|usb|power|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28762" PostTypeId="1" CreationDate="2021-09-08T15:26:38.680" Score="0" ViewCount="60" Body="&lt;p&gt;I'm running Hera 5.1.7 on a Lenovo Thinkpad. This morning when I turned on my computer the Wifi Settings were gone completely. I've tried restarting the computer and the wifi settings are still missing.&lt;/p&gt;&#xA;&lt;p&gt;When I run &lt;code&gt;sudo lshw -C network&lt;/code&gt;, the output is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;*-network UNCLAIMED&#xA;  description: Network controller&#xA;  product: Wireless 8265 / 8275&#xA;  vendor: Intel Corporation&#xA;  physical id: 0&#xA;  bus info: pci@0000:02:00.0&#xA;  version: 78&#xA;  width: 64 bits&#xA;  clock: 33MHz&#xA;  capabilities: pm msi pciexpress bus_master cap_list&#xA;  configuration: latency=0&#xA;  resources: memory:ee2200000-ee201fff&#xA;*-network&#xA;  description: Ethernet interface&#xA;  product: Ethernet Connection (4) I219-V&#xA;  vendor: Intel Corporation&#xA;  physical id: 1f.6&#xA;  bus info: pci@0000:00:1f.6&#xA;  logical name: enp0s31f6&#xA;  version: 21&#xA;  serial: 98:fa:9b:33:22:e8&#xA;  capacity: 1Gbit/s&#xA;  width: 32 bits&#xA;  clock: 33MHz&#xA;  capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 1000bt-fd autonegotiation&#xA;  configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k firmware=0.1-4 latency=0 link=no multicast=yes port=twisted pair&#xA;  resources: irq:146 memory:ee300000-ee31ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="18611" LastEditorUserId="18611" LastEditDate="2021-09-08T15:36:28.027" LastActivityDate="2024-01-26T23:03:20.393" Title="Wifi no longer available in Hera OS 5.1.7" Tags="|release-hera|wifi|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28763" PostTypeId="1" CreationDate="2021-09-08T15:47:12.137" Score="1" ViewCount="256" Body="&lt;p&gt;I don't quite understand the reason for the problem, but apparently the font was more &amp;quot;beautiful&amp;quot; in Elementary OS 5. Now it looks like a font when you select a wrong monitor resolution (but the resolution is the same).&lt;/p&gt;&#xA;&lt;p&gt;Has anyone experienced this problem?&lt;/p&gt;&#xA;" OwnerUserId="26961" LastActivityDate="2021-09-09T07:34:38.283" Title="Elementary OS 6 font seems to be with low resolution" Tags="|display|resolution|fonts|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28764" PostTypeId="2" ParentId="28763" CreationDate="2021-09-08T16:14:21.600" Score="2" Body="&lt;p&gt;There is a discussion on Reddit about that. It seems that on some displays the font looks ugly but apparently not on all displays and not all font types.&#xA;I've noticed this problem immediately after installation, replacing Hera with Odin on the same computer, the font is just rendered badly.&lt;/p&gt;&#xA;&lt;p&gt;Cassidy mentioned that they are looking into this.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-09-08T16:14:21.600" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28765" PostTypeId="2" ParentId="28761" CreationDate="2021-09-08T19:01:31.680" Score="1" Body="&lt;p&gt;On terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cat /proc/acpi/wakeup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will show you every device that may be &amp;quot;awake&amp;quot; during sleep. &amp;quot;On&amp;quot; means awake and &amp;quot;off&amp;quot; is just off. If you want to know what every device is, you can use the command &lt;code&gt;lspci&lt;/code&gt; and compare the digits.&lt;/p&gt;&#xA;&lt;p&gt;To switch the state of a device with the name &amp;quot;&lt;strong&gt;XHC&lt;/strong&gt;&amp;quot; you need to execute the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo su&#xA;echo XHC &amp;gt; /proc/acpi/wakeup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will solve your issue. Beware that some tools like TLP or powertop may also modify this settings.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-09-08T19:01:31.680" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28766" PostTypeId="2" ParentId="28762" CreationDate="2021-09-08T19:12:18.807" Score="0" Body="&lt;p&gt;Connect a lan cable and install your wifi drivers:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-headers-generic-hwe-18.04 firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;By the way, you can update to &lt;a href=&quot;https://elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary 6&lt;/a&gt; if you want. The solution for elementary 6 is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-headers-generic-hwe-20.04 firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-09-08T19:12:18.807" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28767" PostTypeId="2" ParentId="28737" CreationDate="2021-09-08T21:38:34.633" Score="1" Body="&lt;p&gt;In terminal,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install synaptic &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26965" LastActivityDate="2021-09-08T21:38:34.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28768" PostTypeId="1" CreationDate="2021-09-09T00:06:02.137" Score="1" ViewCount="165" Body="&lt;p&gt;I need to track down some files in ES6. How can I do that. I'd like, if possible, to do a recursive search.&lt;/p&gt;&#xA;&lt;p&gt;If Elementary OS 6 doesn't provide the feature, is there a good software package that provides the feature?&lt;/p&gt;&#xA;" OwnerUserId="26944" LastActivityDate="2024-01-29T00:01:00.110" Title="How does one search for files in Elementary OS 6?" Tags="|search|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28769" PostTypeId="1" CreationDate="2021-09-09T04:29:16.367" Score="2" ViewCount="254" Body="&lt;p&gt;I was typing and somehow managed to get terminal to max size (not full screen)   No matter what I do I can't resize it. The resize arrows are in the upper right corner but do nothing. I looked online and tried super key + various combinations. Double clicked on title bar, etc..&lt;/p&gt;&#xA;&lt;p&gt;Nothing worked.  How can I reset it back to defaults?  I looked for an obvious . config file.&lt;/p&gt;&#xA;&lt;p&gt;Regards,&#xA;Don&lt;/p&gt;&#xA;" OwnerUserId="26968" LastEditorUserId="19079" LastEditDate="2021-09-11T04:46:12.117" LastActivityDate="2021-12-12T09:10:36.270" Title="Terminal is maxed and can't resize in Odin" Tags="|display|pantheon-terminal|release-odin|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28770" PostTypeId="1" CreationDate="2021-09-09T05:45:48.200" Score="0" ViewCount="257" Body="&lt;p&gt;Everytime i boot up my laptop the AppCenter would show me a notification that updates are available even though i already updated those components already.&lt;/p&gt;&#xA;" OwnerUserId="26925" LastActivityDate="2021-09-10T10:08:33.830" Title="Elementary OS keeps saying &quot;Updates available&quot; every time i turn on my computer" Tags="|updates|appcenter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28772" PostTypeId="2" ParentId="28575" CreationDate="2021-09-09T07:23:14.500" Score="1" Body="&lt;p&gt;I have the same problem. There doesn't seem to be an easy switch (yet), but I was able to turn it off by editing the source code.&lt;/p&gt;&#xA;&lt;p&gt;1.) Go to &lt;a href=&quot;https://github.com/elementary/terminal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/terminal&lt;/a&gt; and download the sources with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/elementary/terminal.git&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;2.) Inside the source directory, open the file &amp;quot;src/MainWindow.vala&amp;quot; and search for the following line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;action_accelerators[ACTION_RELOAD_TAB] = &amp;quot;F5&amp;quot;;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;3.) Edit that line to a different key code. I used:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;action_accelerators[ACTION_RELOAD_TAB] = &amp;quot;&amp;lt;Control&amp;gt;F5&amp;quot;;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;4.) From the root directory of the source tree, compile the source code according to the GitHub website. You may have to install a few packages, but it is all well documented in the README.md file.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson build &#xA;cd build&#xA;ninja&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;5.) Replace the file io.elementary.terminal in /usr/bin with the newly compiled one in the build directory. That's it. Midnight Commander F5 works like a charm now.&lt;/p&gt;&#xA;&lt;p&gt;This is a temporary fix, of course, and you need to recompile if a new version of Terminal is published in the AppCentre that still has that bug.&lt;/p&gt;&#xA;" OwnerUserId="26970" LastActivityDate="2021-09-09T07:23:14.500" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28773" PostTypeId="2" ParentId="28763" CreationDate="2021-09-09T07:34:38.283" Score="2" Body="&lt;p&gt;I had exactly same problem.&#xA;It seems that replacing Inter font with Ubuntu Regular font make things a little better. Also today there is system update in AppCentre which maybe brings some improvements. Please check it out.&lt;/p&gt;&#xA;&lt;p&gt;I also tried to find beforementioned discussion on this topic at Reddit. This problem is described in rather long post reviewing cons of eOs - here is the link: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/p7ji4r/eos6_shows_great_promises_but_falls_flat_on_its/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.reddit.com/r/elementaryos/comments/p7ji4r/eos6_shows_great_promises_but_falls_flat_on_its/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26963" LastActivityDate="2021-09-09T07:34:38.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28775" PostTypeId="2" ParentId="28635" CreationDate="2021-09-09T10:39:09.360" Score="0" Body="&lt;p&gt;Use &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+ any F-key from &lt;kbd&gt;F1&lt;/kbd&gt; up to &lt;kbd&gt;F6&lt;/kbd&gt;. This will get you to a TTY where you can log in and remove the packages in question. For example, you can try:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge nvidia-driver-340&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-09-09T10:39:09.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28776" PostTypeId="1" CreationDate="2021-09-09T10:43:47.370" Score="0" ViewCount="596" Body="&lt;p&gt;I did a system update on my &lt;em&gt;elementary OS 6 Odin&lt;/em&gt; system with &lt;em&gt;Nvidia GeForce GTX 1660 Ti&lt;/em&gt;. After a reboot I'm left with a black screen, unable to log in. Using &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt; gets me into TTY2, but I am unable to launch &lt;code&gt;lightdm&lt;/code&gt; and log in.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastEditorUserId="19079" LastEditDate="2021-09-09T15:12:56.953" LastActivityDate="2021-09-09T15:12:56.953" Title="Black screen after update (Nvidia driver)" Tags="|nvidia|release-odin|black-screen|nvidia-driver|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28777" PostTypeId="2" ParentId="28776" CreationDate="2021-09-09T10:49:45.013" Score="2" Body="&lt;p&gt;This is a &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-hwe-5.11/+bug/1943086&quot; rel=&quot;nofollow noreferrer&quot;&gt;regression&lt;/a&gt; in Ubuntu 20.04. Anybody who has &lt;code&gt;nvidia-driver-470&lt;/code&gt; and updates to kernel version &lt;code&gt;5.11.0-34-generic&lt;/code&gt; will experience black screen. A temporary walkaround is to log in to a TTY (&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F2&lt;/kbd&gt;) and remove all nvidia-related packages:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge nvidia-driver-470 nvidia-kernel-common-470 ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can just type &lt;code&gt;sudo apt purge nvidia&lt;/code&gt; and hit &lt;kbd&gt;↹ Tab&lt;/kbd&gt; to see all the nvidia packages that are still installed.&lt;/p&gt;&#xA;&lt;p&gt;After doing this, I could get into Pantheon just fine.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;If you've also experienced this, please check “This affects me” in the Ubuntu &lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-hwe-5.11/+bug/1943086&quot; rel=&quot;nofollow noreferrer&quot;&gt;bug tracker&lt;/a&gt;!&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-09-09T10:49:45.013" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28778" PostTypeId="1" AcceptedAnswerId="28783" CreationDate="2021-09-09T15:31:05.123" Score="0" ViewCount="41" Body="&lt;p&gt;I am using Thunderbird, and store my local mail folders on NAS.&lt;/p&gt;&#xA;&lt;p&gt;Suddenly for no apparent reason some (and only some) of them have changed permission from 777 to 600.&lt;/p&gt;&#xA;&lt;p&gt;Thunderbird files are fine and not corrupted (I can access them via Windows PC OK), but not accesible in Elementary OS:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Access to the file was denied&#xA;The file at mailbox:///run/user/1000/doc/16212a0c/Local Folders/abcd-efgx?number=739367 is not readable.&#xA;It may have been removed, moved, or file permissions may be preventing access.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;What could possibly cause this and what is the remedy, please?&lt;/p&gt;&#xA;&lt;p&gt;(I am using elementary OS 5.1.7 Hera)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;LATER EDIT:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have worked out how to change permissions in elementary OS (open Files in new window as Administrator) and can change one file at a time, but two questions remain:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;what has caused it?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;how do I change permissions to a whole bunch of files rather than one at a time?&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-09-09T17:45:20.610" LastActivityDate="2021-09-10T01:36:29.133" Title="permissions issue for email folder stored on NAS" Tags="|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28779" PostTypeId="2" ParentId="24138" CreationDate="2021-09-09T18:08:22.473" Score="0" Body="&lt;p&gt;Create a desktop file with the following&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Type=Application&#xA;Name=Run Executable&#xA;NoDisplay=true&#xA;Icon=application-x-executable&#xA;Exec=/bin/sh -c 'zenity --question --title=&amp;quot;$0&amp;quot; --text=&amp;quot;What do you wish to do with this executable file?&amp;quot; --no-wrap --ok-label Execute --cancel-label Cancel &amp;amp;&amp;amp; &amp;quot;$0&amp;quot;' %f&#xA;Terminal=false&#xA;MimeType=application/x-sharedlib&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;name it &lt;code&gt;run-executable.desktop&lt;/code&gt; and place it in ~/.local/share/applications. You'd be able to execute any executable files by clicking on them. Only problem is, after placing it there, you won't be able to open any executable files in Code to read them. You'd have to install a distro-agnostic text editor like Geany to open them.&lt;/p&gt;&#xA;&lt;p&gt;I found the answer somewhere, but can't remember who gave it.&lt;/p&gt;&#xA;" OwnerUserId="26965" LastActivityDate="2021-09-09T18:08:22.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28781" PostTypeId="1" CreationDate="2021-09-09T23:07:00.113" Score="1" ViewCount="266" Body="&lt;p&gt;I know this is probably a Gnome thing but is there a way to have both monitors switch to another desktop instead of just the main display?&#xA;I know there is an extension for Gnome that allows this but I hesitate to try to install extensions on Pantheon. I installed Pantheon Tweaks but it dont like just installing ppa's tp solve things.&lt;/p&gt;&#xA;" OwnerUserId="26974" LastEditorUserId="19079" LastEditDate="2021-09-11T00:41:38.050" LastActivityDate="2021-09-11T00:41:38.050" Title="Dual monitors on Odin" Tags="|desktop|release-odin|monitors|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28782" PostTypeId="2" ParentId="28781" CreationDate="2021-09-10T01:31:36.733" Score="3" Body="&lt;p&gt;I believe you can do this via Terminal with the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.mutter workspaces-only-on-primary false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I cannot test this right now (the work machines are stock Ubuntu), but this generally the solution with Gnome-based desktops.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-10T01:31:36.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28783" PostTypeId="2" ParentId="28778" CreationDate="2021-09-10T01:36:29.133" Score="0" Body="&lt;p&gt;Determining what caused a file permissions switch on networked storage can be tricky sometimes but, to change permissions on multiple files at once, the simplest way would be via Terminal with &lt;code&gt;chmod&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod -R 755 /home/bambuko/samba/thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This would set all files and directories within the &lt;code&gt;/home/bambuko/samba/thunderbird&lt;/code&gt; directory to &lt;code&gt;755&lt;/code&gt; permissions.&lt;/p&gt;&#xA;&lt;p&gt;If you need to change the ownership of files, you can do a similar thing using &lt;code&gt;chown&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;For example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chown -R bambuko:bambuko /home/bambuko/samba/thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This would set ownership of every file and directory contained in &lt;code&gt;/home/bambuko/samba/thunderbird&lt;/code&gt; to &lt;code&gt;bambuko:bambuko&lt;/code&gt; (or whichever user:group you specify).&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-10T01:36:29.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28785" PostTypeId="2" ParentId="28768" CreationDate="2021-09-10T09:26:32.447" Score="0" Body="&lt;p&gt;Try &lt;a href=&quot;https://albertlauncher.github.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Albert&lt;/a&gt; -&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Run applications, open files or their paths, open bookmarks in your&#xA;browser, search the web, calculate things and a lot more.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="26965" LastActivityDate="2021-09-10T09:26:32.447" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28786" PostTypeId="1" CreationDate="2021-09-10T09:38:23.387" Score="1" ViewCount="886" Body="&lt;p&gt;I installed Elementary OS 6 a couple weeks ago, and it was working perfectly fine until I ran some updates today. It boots into tty1, Ctrl + Alt + F7 doesn't seem to do anything, and running startx isn't working.&lt;/p&gt;&#xA;&lt;p&gt;Here is the log output for startx: &lt;a href=&quot;https://pastebin.pl/view/ccf9cae6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.pl/view/ccf9cae6&lt;/a&gt; (It was too big to fit in the post)&lt;/p&gt;&#xA;&lt;p&gt;At this point I'm considering a reinstall of the OS, but I would like to avoid it if possible.&lt;/p&gt;&#xA;" OwnerUserId="26978" LastActivityDate="2021-09-10T11:15:51.787" Title="Elementary OS 6 going straight to tty1, startx not working" Tags="|release-odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28788" PostTypeId="2" ParentId="28770" CreationDate="2021-09-10T10:08:33.830" Score="1" Body="&lt;p&gt;Seems like I am getting these quite often. I'm thinking these are updates to flatpaks that are installed.&#xA;The way I understood Flatpaks was that they updaed automatically in the background on their launch. But I'm probably confusing that with something else. I'm definitely not a coder and just an end user, lol. But I do know that with Linux you dont HAVE to update something just because there is an update.&lt;/p&gt;&#xA;&lt;p&gt;It would be nice to have an option to turn off update notification. Simliar to Ubuntu where you can set security updates to automatic and only check for regular updates weekly, monthly or never. Being bombarded with notifications when you first fire up the machine to do work is annoying and distracting.&lt;/p&gt;&#xA;" OwnerUserId="26974" LastActivityDate="2021-09-10T10:08:33.830" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28791" PostTypeId="2" ParentId="28589" CreationDate="2021-09-10T14:07:24.420" Score="0" Body="&lt;p&gt;A lot of proprietary codecs are not shipped with elementary os out of the box. Installing ubuntu-restricted-extras package solved this problem for me.&lt;/p&gt;&#xA;" OwnerUserId="26981" LastActivityDate="2021-09-10T14:07:24.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28792" PostTypeId="1" AcceptedAnswerId="28870" CreationDate="2021-09-10T14:34:14.400" Score="0" ViewCount="257" Body="&lt;p&gt;I'm fairly new to Linux and have Odin 6 dual booted alongside windows 10 with 2 monitors. Below is information on my 2 monitors.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Acer [WORKS] - 1920*1080, 60HZ, connected through Display Port&lt;/li&gt;&#xA;&lt;li&gt;LG [DOESNT WORK ]- 2560*1440, 144HZ, NVIDIA G-Sync, HDR, connected through Display Port&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Whenever I start up Odin the process begins showing on monitor 2, but then the screen goes black and I have to turn it off to get it to display on monitor 1. Once its displayed on monitor 1 I can turn monitor 2 back on, but it still has a black screen. It also causes micro stuttering when the 2nd monitor is on. It still detects the monitor as I can see it in the settings and I can drag applications into it, I just can't see them.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;What I've Tried&lt;/h2&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Changing the refresh rate in the settings of monitor 2&lt;/li&gt;&#xA;&lt;li&gt;Setting monitor 2 as the default monitor&lt;/li&gt;&#xA;&lt;li&gt;Power cycling my monitor&lt;/li&gt;&#xA;&lt;li&gt;Unplugging/Re-plugging the display port&lt;/li&gt;&#xA;&lt;li&gt;Unplugging monitor 1&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;So far none of these work so if anyone could point me in the right direction that would be immensely helpful.&lt;/p&gt;&#xA;" OwnerUserId="26976" LastActivityDate="2021-09-22T14:05:27.700" Title="2nd monitor not displaying" Tags="|display|dual-boot|monitors|odin|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28793" PostTypeId="1" CreationDate="2021-09-10T16:55:18.937" Score="0" ViewCount="14" Body="&lt;p&gt;It seems that this trouble is from early 2010's but  none of  walkarounds which I found so far does not work in Elemenary OS 6 in 2021.&lt;/p&gt;&#xA;&lt;p&gt;My main application of interest is Jetbrains Intellij Idea. Jetbrains even added switch in Idea's keymap settings which is related to this problem according to its title. However it has no effect in eOS 6.&lt;/p&gt;&#xA;&lt;p&gt;Would you please tell me how such&#xA;inconvenient and rather critical for any Java-developer issue could be fixed. I'm ready to provide any additional details of my eOS 6 configuration (almost default settings) for further elaboration.&lt;/p&gt;&#xA;&lt;p&gt;Non-java apps seems to work fine.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="26963" LastActivityDate="2021-09-10T16:55:18.937" Title="Hotkeys still don't work in Java applications on non-latin keyboard layout" Tags="|java|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28794" PostTypeId="2" ParentId="28768" CreationDate="2021-09-10T18:13:18.963" Score="0" Body="&lt;p&gt;If you open a folder in Files (the default file explorer in Elementary) and start typing, it will perform a deep search – however it will only search in file &lt;em&gt;names&lt;/em&gt;, not their content afaik.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, you can hit &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;F&lt;/kbd&gt; to trigger the same functionality.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-09-10T18:13:18.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28795" PostTypeId="2" ParentId="26545" CreationDate="2021-09-10T18:19:32.687" Score="1" Body="&lt;p&gt;Related to RDP, &amp;quot;Remmina Remote Desktop Client&amp;quot; works on ElementaryOS very well!&lt;/p&gt;&#xA;" OwnerUserId="26963" LastActivityDate="2021-09-10T18:19:32.687" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28796" PostTypeId="2" ParentId="28724" CreationDate="2021-09-10T18:27:36.833" Score="1" Body="&lt;p&gt;Go to &lt;em&gt;Settings → Keyboard → Shortcuts → Custom&lt;/em&gt;.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/DQnyb.png&quot; alt=&quot;enter image description here&quot; /&gt;&#xA;Then add a new custom shortcut with command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak run io.elementary.calculator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, set the key to launch it as any key combination you like.&lt;/p&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-09-10T18:27:36.833" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28797" PostTypeId="1" CreationDate="2021-09-10T21:01:34.633" Score="0" ViewCount="465" Body="&lt;p&gt;I did download Steam its website and install it on Elementary OS 6 Odin but when I tried to start it, it gives an error &amp;quot;You are missing the following 32-bit libraries, and Steam may not run: libGL.so.1, libdrm.so2&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="8946" LastActivityDate="2024-01-29T13:08:21.087" Title="How can I install 32-bit libraries on Elementary OS 6 Odin?" Tags="|release-odin|elementary-project|steam|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28799" PostTypeId="2" ParentId="28797" CreationDate="2021-09-11T09:17:57.817" Score="0" Body="&lt;p&gt;You should enable i386 architecture.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;&#xA;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After this, the Steam installation should be able to pull all i386 dependencies.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-09-11T09:17:57.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28801" PostTypeId="1" CreationDate="2021-09-11T15:37:05.933" Score="1" ViewCount="31" Body="&lt;p&gt;Recently, I found out that the Gestures settings has gone from the elementary os settings app. I booted from the live usb to recheck that but found out that was still there in live usb but not in my main system. The multitouch gestures do work fine, only the gestures settings is not there. What could possibly be the cause, how to bring back the gestures settings plug? Any help would be highly appreciated&#xA;&lt;a href=&quot;https://i.stack.imgur.com/TNjqz.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TNjqz.png&quot; alt=&quot;See image for better understanding, no gestures plug is there!&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26987" LastActivityDate="2021-09-11T15:37:05.933" Title="&quot;Gestures&quot; plug not showing in switchboard" Tags="|switchboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28802" PostTypeId="1" CreationDate="2021-09-12T03:19:06.167" Score="0" ViewCount="42" Body="&lt;p&gt;I'm using elementary OS 6. Currently my home WiFi router is not visible on WiFi networks so i have to connect my mobile to WiFi and make hotspot to access internet.&lt;/p&gt;&#xA;&lt;p&gt;When scan WiFi all other networks are listed in list except my home router. I don't this this related to new OS but this is so annoying.&lt;/p&gt;&#xA;&lt;p&gt;What could be the problem? any suggestions?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't think the router is not compatible because sometimes suddenly it show up on WiFi list and can work normally but it disappears after a while. More impotently if i reset my WiFi router it shows up and works as normally. but after a day or two days this happens again.&lt;/p&gt;&#xA;&lt;p&gt;Also it's not hidden because since sometimes i connects i have that WiFi saved in list so when i trying to connect it shows disconnected.&lt;/p&gt;&#xA;&lt;p&gt;Router model is &lt;code&gt;Huawei B312-926&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Output of &lt;code&gt;sudo lshw -c network&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;*-network                 &#xA;       description: Wireless interface&#xA;       product: QCA6174 802.11ac Wireless Network Adapter&#xA;       vendor: Qualcomm Atheros&#xA;       physical id: 0&#xA;       bus info: pci@0000:02:00.0&#xA;       logical name: wlp2s0&#xA;       version: 32&#xA;       serial: 9c:b6:d0:d5:12:8b&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless&#xA;       configuration: broadcast=yes driver=ath10k_pci driverversion=5.11.0-34-generic firmware=WLAN.RM.4.4.1-00140-QCARMSWPZ-1 ip=192.168.***.*** latency=0 link=yes multicast=yes wireless=IEEE 802.11&#xA;       resources: irq:142 memory:dd200000-dd3fffff&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Output of &lt;code&gt;sudo lsusb&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 004: ID 04f3:21d4 Elan Microelectronics Corp. Touchscreen&#xA;Bus 001 Device 003: ID 0cf3:e301 Qualcomm Atheros Communications &#xA;Bus 001 Device 002: ID 09da:c10a A4Tech Co., Ltd. USB Mouse&#xA;Bus 001 Device 005: ID 1bcf:2b95 Sunplus Innovation Technology Inc. Integrated_Webcam_HD&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Output of &lt;code&gt;lspci&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)&#xA;00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) (rev 07)&#xA;00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)&#xA;00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 07)&#xA;00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)&#xA;00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)&#xA;00:15.0 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #0 (rev 31)&#xA;00:15.1 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Serial IO I2C Controller #1 (rev 31)&#xA;00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)&#xA;00:17.0 SATA controller: Intel Corporation HM170/QM170 Chipset SATA Controller [AHCI Mode] (rev 31)&#xA;00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #1 (rev f1)&#xA;00:1c.1 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #2 (rev f1)&#xA;00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)&#xA;00:1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1)&#xA;00:1d.6 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #15 (rev f1)&#xA;00:1f.0 ISA bridge: Intel Corporation HM170 Chipset LPC/eSPI Controller (rev 31)&#xA;00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)&#xA;00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)&#xA;00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)&#xA;01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)&#xA;02:00.0 Network controller: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter (rev 32)&#xA;03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)&#xA;04:00.0 Non-Volatile memory controller: Toshiba Corporation XG4 NVMe SSD Controller (rev 01)&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="21128" LastEditorUserId="21128" LastEditDate="2021-09-13T10:06:38.850" LastActivityDate="2021-09-13T10:06:38.850" Title="Only one WiFi network not detecting" Tags="|wifi|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28805" PostTypeId="1" CreationDate="2021-09-12T12:37:52.147" Score="0" ViewCount="81" Body="&lt;p&gt;hi everyone I hope for your help. i am trying to install elementary on my asus x205ta without getting results, i follow the guide on the elementary site but i don't get any results. I also tried other guides but in all cases after installation, when the pc starts it takes me to the bios screen as if there were no os on the ssd. if anyone could help me I would be grateful, thanks and have a good time.&lt;/p&gt;&#xA;" OwnerUserId="26992" LastActivityDate="2024-01-31T04:05:10.737" Title="unable to install elementary on asus x205ta" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28806" PostTypeId="1" CreationDate="2021-09-12T14:40:02.737" Score="1" ViewCount="183" Body="&lt;p&gt;Fonts are noticeably more unsharp on Odin on comparison to Hera. Se screenshots.&#xA;Is it possible to edit rendering settings on Odin?&lt;/p&gt;&#xA;&lt;p&gt;Download images and view them at 100%:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yzUpM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yzUpM.png&quot; alt=&quot;Odin screenshot&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YJTmM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YJTmM.png&quot; alt=&quot;Hera screesnot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16146" LastActivityDate="2022-02-11T12:05:40.523" Title="Odin fonts unsharp, how to fix like Hera?" Tags="|fonts|odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28807" PostTypeId="1" CreationDate="2021-09-12T15:00:44.373" Score="0" ViewCount="71" Body="&lt;p&gt;Currently I mainly use macOS and I tried EOS because it seemed so similar. However, the keyboard shortcuts were very &amp;quot;windows like&amp;quot;. Is it possible to set the system so the keyboard shortcuts become equal or very similar to macOS? That would make the transition so much smoother.&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="26993" LastActivityDate="2024-01-31T02:03:00.333" Title="Is it possible to set EOS keyboard shortcuts to be like in macOS?" Tags="|keyboard-shortcuts|macintosh|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28808" PostTypeId="2" ParentId="28807" CreationDate="2021-09-12T16:28:37.823" Score="0" Body="&lt;p&gt;Yes, you can. Just go to System Settings &amp;gt; Keyboard &amp;gt; Shortcuts&#xA;Then click on any keybinding you want to change &amp;amp; give custom keystrokes.&#xA;Like, I myself has changed &amp;quot;Close&amp;quot; from Alt+F4 to Command+Q which is traditional on a mac&#xA;N.B:- On a windows laptop command key is the super or windows key.&#xA;Upvote if this helps!&lt;/p&gt;&#xA;" OwnerUserId="26987" LastActivityDate="2021-09-12T16:28:37.823" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28809" PostTypeId="2" ParentId="28807" CreationDate="2021-09-12T17:59:11.897" Score="0" Body="&lt;p&gt;In response to another question on here, I described how to change the cursor navigation to match MacOS, using a tool called Autokey.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28619/how-to-get-cursor-text-navigation-like-macos-cmdctrl-for-end-start-of-line/28656#28656&quot;&gt;How to get cursor text navigation like MacOS - cmd(ctrl) for end/start of line, option(alt) for next/prev word&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-09-12T17:59:11.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28810" PostTypeId="1" CreationDate="2021-09-12T22:08:09.013" Score="0" ViewCount="1443" Body="&lt;p&gt;I've tried uninstalling epiphany but I get &amp;quot;package not installed&amp;quot;&#xA;I tried from Applications menu and I got &amp;quot;Application state not set as installed in AppCenter for package: GNOME Web&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I looked for &amp;quot;Gnome Web&amp;quot; in Synaptics and could not find it.&lt;/p&gt;&#xA;&lt;p&gt;Looking online didn't help.&lt;/p&gt;&#xA;&lt;p&gt;I just want to uninstall it, it does not work, I get &amp;quot;Something went wrong while displaying this page. Please reload or visit a different page to continue.&amp;quot; in &lt;em&gt;every&lt;/em&gt; tab.&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled Elementary OS 6 and Web stopped working 10 min in.&lt;/p&gt;&#xA;&lt;p&gt;At the same time Midori and Edge are rock solid.&lt;/p&gt;&#xA;" OwnerUserId="26936" LastActivityDate="2024-02-01T07:02:50.317" Title="Cannot uninstall the Web browser" Tags="|epiphany|" AnswerCount="2" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28811" PostTypeId="2" ParentId="28805" CreationDate="2021-09-13T01:00:09.767" Score="0" Body="&lt;p&gt;Unfortunately, Elementary OS is a bit too heavy for your computer. This is a comparison of &lt;a href=&quot;https://elementary.io/docs/installation#download-elementary-os&quot; rel=&quot;nofollow noreferrer&quot;&gt;the eOS Recommended Hardware&lt;/a&gt; against your Asus:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt; &lt;/th&gt;&#xA;&lt;th&gt;Recommendation&lt;/th&gt;&#xA;&lt;th&gt;Asus X205TA&lt;/th&gt;&#xA;&lt;th&gt;Result&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;CPU&lt;/td&gt;&#xA;&lt;td&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/td&gt;&#xA;&lt;td&gt;1.33-GHz Intel Atom Z3735 CPU&lt;/td&gt;&#xA;&lt;td&gt;Insufficient&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Memory&lt;/td&gt;&#xA;&lt;td&gt;4 GB&lt;/td&gt;&#xA;&lt;td&gt;2 GB&lt;/td&gt;&#xA;&lt;td&gt;Insufficient Memory&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Storage&lt;/td&gt;&#xA;&lt;td&gt;15 GB (SSD)&lt;/td&gt;&#xA;&lt;td&gt;32 GB (eMMC)&lt;/td&gt;&#xA;&lt;td&gt;Slow, but sufficient&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Display&lt;/td&gt;&#xA;&lt;td&gt;1024x768 (SVGA)&lt;/td&gt;&#xA;&lt;td&gt;1366x768 (WXGA)&lt;/td&gt;&#xA;&lt;td&gt;Sufficient&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;While it certainly possible to use Elementary on a system like this with a great deal of post-installation tweaking via the command-line in a Live Session, it would require a remarkable knowledge of the inner workings of GDK, the Linux kernel, and your hardware limitations. It's not something that most people will do.&lt;/p&gt;&#xA;&lt;p&gt;That said, if you would like to use a modern version of Linux on your Asus notebook, you may want to consider &lt;a href=&quot;https://ubuntu-mate.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu MATE&lt;/a&gt;, &lt;a href=&quot;https://xubuntu.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Xubuntu&lt;/a&gt;, or — one of my favourite light-weight distros — &lt;a href=&quot;https://www.bodhilinux.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bohdi Linux&lt;/a&gt;. These are all based on Ubuntu, just like Elementary OS, and receive regular updates.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-13T01:00:09.767" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28812" PostTypeId="1" CreationDate="2021-09-13T01:23:22.060" Score="0" ViewCount="51" Body="&lt;p&gt;The trackpad on my old MacBook Air is practically unusable, it is so twitchy. Very frustrating since it worked perfectly before I installed elementary 6 and this bistro looks great otherwise. Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="26998" LastActivityDate="2024-02-01T12:08:36.040" Title="Twitchy cursor control with MacBook Air trackpad" Tags="|touchpad|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28813" PostTypeId="1" CreationDate="2021-09-13T04:25:46.313" Score="2" ViewCount="284" Body="&lt;p&gt;Third party app icons (Discord, Steam, etc.) are not showing up in the tray portion of the top panel on Elementary OS 6 (Odin). Native icons like network, microphone, etc. work, just not third party indicators.&lt;/p&gt;&#xA;&lt;p&gt;I believe an alternative was to use Lafydev's &lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel-indicator-ayatana&lt;/a&gt; or &lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-namarupa/&quot; rel=&quot;nofollow noreferrer&quot;&gt;wingpanel-indicator-namarupa&lt;/a&gt; but none of them are working. I added this to the indicator-application.desktop file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Manually started the indicator-application service, this was the output:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;/usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;(process:4600): indicator-application-service-WARNING **: 19:54:31.377: Unable to get &amp;gt;watcher name 'org.kde.StatusNotifierWatcher'&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;(process:4600): indicator-application-service-WARNING **: 19:54:31.377: Name Lost&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Those wingpanel apps were supposed to fix this but for some reason they just aren't working.&lt;/p&gt;&#xA;" OwnerUserId="26999" LastActivityDate="2024-02-11T03:02:15.283" Title="Wingpanel icons are not showing up despite installing ayatana and namarupa" Tags="|wingpanel|icons|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28817" PostTypeId="2" ParentId="28547" CreationDate="2021-09-13T14:43:38.827" Score="1" Body="&lt;p&gt;Any help how to disable single click on folder will be helpful.&lt;/p&gt;&#xA;&lt;p&gt;Its really annoying that you can't change this settings now.&lt;/p&gt;&#xA;" OwnerUserId="27003" LastActivityDate="2021-09-13T14:43:38.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28818" PostTypeId="2" ParentId="28677" CreationDate="2021-09-13T17:18:24.600" Score="0" Body="&lt;p&gt;I have the same problem with this. I'm having notifications normally in the beggining but I don't know why days later I don't have more notifications from the panel, like volume up/down, bluetooth and the usual notifications.&lt;/p&gt;&#xA;&lt;p&gt;In the configuration settings all notifications are activated and looks normal but doesn't show.&lt;/p&gt;&#xA;&lt;p&gt;Some advice to restart this, please?&lt;/p&gt;&#xA;" OwnerUserId="26793" LastActivityDate="2021-09-13T17:18:24.600" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28822" PostTypeId="2" ParentId="28806" CreationDate="2021-09-14T06:20:30.573" Score="1" Body="&lt;p&gt;It's the font!&#xA;I changed to Open Sans as in Hera and the font is sharper again.&lt;/p&gt;&#xA;" OwnerUserId="16146" LastActivityDate="2021-09-14T06:20:30.573" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28823" PostTypeId="2" ParentId="28812" CreationDate="2021-09-14T06:37:45.330" Score="0" Body="&lt;p&gt;This can probably be controlled via the &amp;quot;Mouse &amp;amp; Touchpad&amp;quot; settings.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open your &amp;quot;System Settings&amp;quot; application:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/g4BAu.png&quot; alt=&quot;System Settings&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Select &amp;quot;Mouse &amp;amp; Touchpad&amp;quot;:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/iMsRr.png&quot; alt=&quot;Mouse &amp;amp; Touchpad&quot; /&gt;&lt;/li&gt;&#xA;&lt;li&gt;Set the &amp;quot;Pointer Speed&amp;quot; to a value low enough that it feels comfortable&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Some touchpads are certainly more sensitive than others. Hopefully this will give you the accuracy you're looking for &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-14T06:37:45.330" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28825" PostTypeId="2" ParentId="22135" CreationDate="2021-09-14T09:37:03.643" Score="0" Body="&lt;p&gt;I have Epson V300 and I have solved it by downloading Linux utility from Epson:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://support.epson.net/linux/en/iscan.php?model=gt-f720&amp;amp;version=2.30.4&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://support.epson.net/linux/en/iscan.php?model=gt-f720&amp;amp;version=2.30.4&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It just worked :-)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-09-14T09:37:03.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28826" PostTypeId="1" CreationDate="2021-09-14T11:00:44.667" Score="1" ViewCount="1714" Body="&lt;p&gt;I have a dual boot system with following SSD disk partition :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Boot partition ( /boot/efi ) : 100 MB&lt;/li&gt;&#xA;&lt;li&gt;linux root parition ( / ) : 100 GB&lt;/li&gt;&#xA;&lt;li&gt;Windows install dir       : 150 GB&lt;/li&gt;&#xA;&lt;li&gt;Windoes dir               : 125 GB&lt;/li&gt;&#xA;&lt;li&gt;unallocated space         : 100 GB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7nl78.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7nl78.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;`&lt;/p&gt;&#xA;&lt;p&gt;Since the new release of elementary OS needs a fresh install, If any one can help me with following question before I install elementary OS Odin :&lt;/p&gt;&#xA;&lt;p&gt;Question 1 : What shall I do with in my new install while choosing boot partition i.e while choosing the same boot partition shall I choose the option format and use or just use. Also What will happen to Windows boot loader if I choose to format my boot partition and the use it while installing the new OS version.&lt;/p&gt;&#xA;&lt;p&gt;Question 2 : What is the recommended size of boot partition&lt;/p&gt;&#xA;&lt;p&gt;Question 3 : As of now I don't have any swap partition and my RAM size is 8 GB, Shall I create a swap partition and what size shall I choose&lt;/p&gt;&#xA;&lt;p&gt;Any help will be highly appreciable.&lt;/p&gt;&#xA;" OwnerUserId="24408" LastActivityDate="2021-09-19T15:31:06.897" Title="What should be done with boot partition for updated installation of elementary OS Odin" Tags="|system-installation|boot|dual-boot|install|odin|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28831" PostTypeId="1" CreationDate="2021-09-14T19:30:24.730" Score="0" ViewCount="34" Body="&lt;p&gt;I've just installed eOS.  The initial screen resolution is a lot lower than the optimum for my screen.  The system doesn't seem to recognise the screen mark and model, and I can't find a means to do that within the System Settings.  So, how should I do that?  What should I read?&lt;/p&gt;&#xA;&lt;p&gt;Thanks a lot in advance.&lt;/p&gt;&#xA;&lt;p&gt;Hosam Adeeb Nashed&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;lspci:&#xA;&#xA;00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)&#xA;00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)&#xA;00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)&#xA;00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)&#xA;00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)&#xA;00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)&#xA;00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)&#xA;00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)&#xA;00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)&#xA;00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)&#xA;00:1f.0 ISA bridge: Intel Corporation H55 Chipset LPC Interface Controller (rev 06)&#xA;00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)&#xA;00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)&#xA;00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)&#xA;02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)&#xA;03:01.0 Multimedia audio controller: Creative Labs EMU10k1 [Sound Blaster Live! Series] (rev 08)&#xA;03:01.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)&#xA;03:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)&#xA;03:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)&#xA;3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)&#xA;3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)&#xA;3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)&#xA;3f:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 05)&#xA;3f:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)&#xA;3f:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27017" LastEditorUserId="3018" LastEditDate="2021-09-16T07:56:12.560" LastActivityDate="2021-09-16T07:56:12.560" Title="Unsuitable Screen Resolution" Tags="|display|resolution|" AnswerCount="0" CommentCount="15" ContentLicense="CC BY-SA 4.0" />
  <row Id="28834" PostTypeId="2" ParentId="28737" CreationDate="2021-09-14T22:05:11.417" Score="0" Body="&lt;p&gt;Elementary OS is moving towards flatpak packages. It is highly recommended you &lt;a href=&quot;https://flathub.org/apps/details/com.valvesoftware.Steam&quot; rel=&quot;nofollow noreferrer&quot;&gt;install the flatpak version of steam&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Just open that link and press Install. Then it will open a Sideload screen that will let you install Steam on your system.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-09-14T22:05:11.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28836" PostTypeId="2" ParentId="28753" CreationDate="2021-09-16T00:37:56.837" Score="1" Body="&lt;p&gt;I eventually ended up figuring out how to fix it from a live iso (had to as the older initrd image I was previously using also stopped working). I imagine anything would work but for the sake of completeness I used a Fedora 34 live ISO.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot into Live ISO&lt;/li&gt;&#xA;&lt;li&gt;Open a terminal and run sudo su (for convenience)&lt;/li&gt;&#xA;&lt;li&gt;Figure out which device has your luks partition if encryption is in play (mine was /dev/nvme0n1p3)&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;cryptsetup luksOpen /dev/nvme0n1p3 cryptdata&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;vgchange -ay&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run the following &lt;code&gt;mount&lt;/code&gt; commands&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;pre&gt;&lt;code&gt;mount /dev/mapper/data-root /mnt&#xA;mount /dev/nvme0n1p2 /mnt/boot (substitute nvme0n1p2 for whatever your boot partition is)&#xA;mount -t proc proc /mnt/proc&#xA;mount -t sysfs sysfs /mnt/sys&#xA;mount -o bind /dev /mnt/dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol start=&quot;7&quot;&gt;&#xA;&lt;li&gt;Run &lt;code&gt;chroot /mnt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;apt install lvm2 cryptsetup-initramfs&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Run &lt;code&gt;update-initramfs -c -k all&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;A few additional notes:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;If you did not enable encryption in the installer you may not need to do any of the steps involving cryptsetup. You may not need to do the &lt;code&gt;vgchange&lt;/code&gt; either as I'm not sure whether LVM is used when you don't enable encryption during installation.&lt;/li&gt;&#xA;&lt;li&gt;Make sure your live environment has internet, and if you get name resolution errors in the chroot environment then you may need to edit &lt;code&gt;/etc/resolv.conf&lt;/code&gt; to add a known-good DNS nameserver (such as Google's public DNS 8.8.8.8)&lt;/li&gt;&#xA;&lt;li&gt;If you get a warning during the &lt;code&gt;update-initramfs&lt;/code&gt; about cryptdata not being found, then you'll need to check your &lt;code&gt;/etc/crypttab&lt;/code&gt; to see what the name is in there (should be at the beginning of the first line). Then you'll need to unmount everything, run &lt;code&gt;vgchange -an&lt;/code&gt; to deactivate the logical volumes, run &lt;code&gt;cryptesetup luksClose cryptdata&lt;/code&gt; to close the luks encrypted partition, and then repeat the steps, substituting the name from &lt;code&gt;/etc/crypttab&lt;/code&gt; in place of cryptdata.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26956" LastEditorUserId="26956" LastEditDate="2021-09-16T00:43:25.277" LastActivityDate="2021-09-16T00:43:25.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28843" PostTypeId="1" CreationDate="2021-09-17T08:28:10.643" Score="1" ViewCount="74" Body="&lt;p&gt;Abstract: LowDPI/HiDPI is saved per monitor configuration, but font size is shared for all configurations?&lt;/p&gt;&#xA;&lt;p&gt;I have two different monitor configs:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;at home I have single HiDPI DELL 25&amp;quot; U-series&lt;/li&gt;&#xA;&lt;li&gt;at work I have two 1980x1080 24&amp;quot; DELLs&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;At home I use &lt;strong&gt;2x Scale&lt;/strong&gt; which is set in Display Settings UI and then preserved in ~/.config/monitors.xml in separate &lt;strong&gt;configuration&lt;/strong&gt; section.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/C48Ic.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/C48Ic.png&quot; alt=&quot;LowDPI/HiDPI is saved per monitor configuration&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;At work configuration it is more comfortable to use &lt;strong&gt;1x Scale&lt;/strong&gt; - it is saved in another &lt;strong&gt;configuration&lt;/strong&gt; section of monitors.xml.&lt;/p&gt;&#xA;&lt;p&gt;And there is another setting - &amp;quot;Font size&amp;quot; which I need to switch every time at start my home/work sessions. At home I setup &amp;quot;small font size&amp;quot; and at work - &amp;quot;larger&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cdt7D.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cdt7D.png&quot; alt=&quot;Font size is shared for all configurations&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Would you please tell me is there any opportunity to automatically switch the &amp;quot;Font size&amp;quot;. Why it is not saved per &lt;strong&gt;configuration&lt;/strong&gt; together with &lt;strong&gt;scale&lt;/strong&gt; property?&lt;/p&gt;&#xA;" OwnerUserId="26963" LastEditorUserId="26963" LastEditDate="2021-09-17T08:33:50.093" LastActivityDate="2021-09-17T08:33:50.093" Title="How to set different font configuration per monitor configuration? (on ElementaryOS 6 Odin)" Tags="|fonts|hidpi|monitors|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28844" PostTypeId="2" ParentId="27997" CreationDate="2021-09-17T15:43:48.897" Score="1" Body="&lt;p&gt;From the bios menu, enable legacy support, and this will solve your problem.&lt;/p&gt;&#xA;" OwnerUserId="27038" LastActivityDate="2021-09-17T15:43:48.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28845" PostTypeId="1" CreationDate="2021-09-18T05:50:42.983" Score="0" ViewCount="231" Body="&lt;p&gt;Hey can anyone help me installing elementary OS , I have flash the iso file to my USB drive and everything works fine , when I installing elementary os it says I don't have enough space but I have a 512gb ssd&lt;/p&gt;&#xA;" OwnerDisplayName="user27041" LastActivityDate="2021-12-08T07:59:43.993" Title="Can't install elementary OS , Not enough space but I have a 512gb SSD" Tags="|system-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28847" PostTypeId="2" ParentId="25955" CreationDate="2021-09-18T20:38:57.260" Score="0" Body="&lt;p&gt;You may use the &amp;quot;terminal extension&amp;quot; on elementary code also you can run the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gcc -o test testfile.cpp &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This can create an executable called &lt;code&gt;test&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Hope this can help.&lt;/p&gt;&#xA;" OwnerUserId="26971" LastEditorUserId="25612" LastEditDate="2021-10-13T08:27:29.033" LastActivityDate="2021-10-13T08:27:29.033" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28848" PostTypeId="2" ParentId="24284" CreationDate="2021-09-18T20:42:59.293" Score="0" Body="&lt;p&gt;Make Elementary OS Bootable USB drive by:&#xA;Steps&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Download Etcher / Balena Etcher&lt;/li&gt;&#xA;&lt;li&gt;Get the Elementary OS ISO files&lt;/li&gt;&#xA;&lt;li&gt;Run Etcher and add ISO image&lt;/li&gt;&#xA;&lt;li&gt;Bootable Elementary OS USB drive is ready&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26971" LastActivityDate="2021-09-18T20:42:59.293" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28850" PostTypeId="2" ParentId="1681" CreationDate="2021-09-19T10:48:23.990" Score="0" Body="&lt;p&gt;If you hit &lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F7&lt;/kbd&gt; when you get to screens that you can't navigate, a hand will appear and you can move the panel around so that you can see the [Next] or [Continue] buttons and press them.&lt;/p&gt;&#xA;" OwnerUserId="27048" LastActivityDate="2021-09-19T10:48:23.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28852" PostTypeId="2" ParentId="28826" CreationDate="2021-09-19T15:31:06.897" Score="3" Body="&lt;p&gt;There are few things to know here. The default Windows EFI partition of 100MB is too small for Windows and Elementary - Elementary will not be able to install on it. You need to create a second EFI partition of 512MB, format it as FAT32 and with &amp;quot;boot,esp&amp;quot; flags, and then configure your BIOS to boot from the second EFI.&lt;/p&gt;&#xA;&lt;p&gt;This means you need to select the advanced steps during the Elementary install, create the partitions manually in GParted in the empty space and then mount them from the Elementary installer:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;one EFI partition of type FAT32 with 512MB mounted on /boot/efi,&lt;/li&gt;&#xA;&lt;li&gt;one root partition of type ext4 or xfs mounted on /&lt;/li&gt;&#xA;&lt;li&gt;one swap partition of 1GB&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Regarding your questions:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I assume you mean EFI partition when you are asking about &amp;quot;boot partition&amp;quot;. You don't need boot partition mounted on /boot, just EFI partition mounted on /boot/efi. Do not format the existing one as that will delete the windows bootloader. Create new EFI partition for Elementary.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;EFI partition for elementary should be 512MB. Maybe a smaller could work (try 256MB), but too small will cause the installer to complain. I used 512MB&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It is always good to have some swap. 512MB-2GB should be sufficient for most cases. You can also install the package zram-tools (&amp;quot;apt install zram-tools&amp;quot;) after Elementary is fully installed, which can use part of the RAM as compressed swap.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Here is a look of the partitions in my dual boot (Win10+Elementary):&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Q3TSc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Q3TSc.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26897" LastActivityDate="2021-09-19T15:31:06.897" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28853" PostTypeId="1" CreationDate="2021-09-20T10:11:11.197" Score="0" ViewCount="86" Body="&lt;p&gt;good morning everyone,&#xA;in the odin applications there is the desktop folder application but clicking on it does not get any menu.&#xA;I wanted to enable the desktop as in freya and juno but I can't even install the software.&lt;/p&gt;&#xA;" OwnerUserId="27053" LastActivityDate="2021-09-20T10:11:11.197" Title="elementary odin desktop folder does not work" Tags="|desktop|folder|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28854" PostTypeId="2" ParentId="21276" CreationDate="2021-09-20T12:04:21.097" Score="1" Body="&lt;p&gt;Try to roll back to old version, I have similar issue after the update. It takes to long start up&lt;/p&gt;&#xA;" OwnerUserId="26971" LastActivityDate="2021-09-20T12:04:21.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28855" PostTypeId="1" CreationDate="2021-09-20T15:01:43.500" Score="0" ViewCount="17" Body="&lt;p&gt;While installing Libreoffice from Flathub, i had to suspend my PC for sometime and this abruptly ended the installation. When i tried to install again, it showed me an error message. Later when I tried to install PyCharm from the software center(Like before, the installation was interrupted misway in this case also), I got the same error message. If the installation completes without any interruptions, it will run fine. But if you once get an error during the installation of one app, apparently I can't install it anymore.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gPtkR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gPtkR.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&lt;p&gt;I'm getting the same issue even while trying to install on command line from flathub. My broadband is very unreliable so if there is a network error during any installation, as of now it means I can't install that app again on my system.(sorry I could'nt paste the error description here)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/HtgHR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/HtgHR.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27057" LastEditorUserId="27057" LastEditDate="2021-10-07T02:09:52.060" LastActivityDate="2021-10-07T02:09:52.060" Title="Can't complete installation of an application after getting error on first attempt" Tags="|appcenter|thirdpartyapps|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28856" PostTypeId="2" ParentId="15055" CreationDate="2021-09-20T17:30:37.407" Score="0" Body="&lt;p&gt;I'm using elementary OS 6, and I was having this problem. I solved it with this command in the terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;alsactl restore&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After that, the sound started to work.&lt;/p&gt;&#xA;" OwnerUserId="16936" LastEditorUserId="25612" LastEditDate="2021-09-29T18:53:55.580" LastActivityDate="2021-09-29T18:53:55.580" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28857" PostTypeId="2" ParentId="753" CreationDate="2021-09-20T17:35:45.917" Score="0" Body="&lt;p&gt;I faced this problem now on elementary OS 6 and solved it with this command: &lt;strong&gt;alsactl restore&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;After that, the sound started to work.&lt;/p&gt;&#xA;" OwnerUserId="16936" LastActivityDate="2021-09-20T17:35:45.917" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28859" PostTypeId="1" CreationDate="2021-09-21T00:06:32.070" Score="0" ViewCount="157" Body="&lt;p&gt;When my computer boots up I get the grub menu with Elementary Odin as the first item. If I do nothing it boots to Odin of course.&lt;/p&gt;&#xA;&lt;p&gt;I would like to have windows boot by default.&lt;/p&gt;&#xA;&lt;p&gt;I have tried grub-customizer but it doesn't change the boot order even after moving windows to the top above Elementary Odin and saving the changes.&lt;/p&gt;&#xA;&lt;p&gt;Ideas?&lt;/p&gt;&#xA;&lt;p&gt;Rex&lt;/p&gt;&#xA;" OwnerUserId="27062" LastActivityDate="2021-09-21T00:06:32.070" Title="Changing the boot order in grub to have windows boot by default" Tags="|grub|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28860" PostTypeId="1" AcceptedAnswerId="28863" CreationDate="2021-09-21T05:07:57.537" Score="0" ViewCount="185" Body="&lt;p&gt;(I don't know if this question belongs here, but here we go)&lt;/p&gt;&#xA;&lt;p&gt;I bought a new HP 14(2021) last week, with 11th gen core i3 and Xe graphics. It came with Windows 10. After a few days, I installed Manjaro on it, along with windows but Manjaro had some problems booting up. I watched a few YT tutorials and found out that it could be associated with grub.&lt;/p&gt;&#xA;&lt;p&gt;Yesterday, I booted into a live user in manjaro and was gonna fix grub. There was a part in which I would have to mount the root partition of Manjaro, but I accidentally mounted the Windows partition. Then, I was trying to unmount it, but the partition was busy, so I powered off the pc. I turned on the lap again, but the grub menu was not shown and it directly booted into Manjaro, which had some rootfs problems.&lt;/p&gt;&#xA;&lt;p&gt;Then, I installed elementary os, without formatting the efi, but the grub menu still didn't show Windows. I checked the uefi firmware, and it still showed windows boot manager. On selecting it, a grub rescue screen was shown. From elementary, I tried os-prober and update-grub, but both didn't show the windows partition.&lt;/p&gt;&#xA;&lt;p&gt;The EFI partition currently has manjaro,windows boot manager,ubuntu and elementary os. The last 2 came after installing EOS.&lt;/p&gt;&#xA;&lt;p&gt;When I booted from the Windows 10 iso and executed some commands in the command prompt of the troubleshoot, it could not find any windows installation. So,has windows been uninstalled or is it some Linux related problem?&#xA;(I can still access files in the Windows Partition from Elementary)&lt;/p&gt;&#xA;&lt;p&gt;P.S: The link of the video which I referred to:&#xA;&lt;a href=&quot;https://youtu.be/8hxLIua8SS4?t=163&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/8hxLIua8SS4?t=163&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;PPS: I am ready to install windows again, if required.&lt;/p&gt;&#xA;" OwnerUserId="23394" LastEditorUserId="23394" LastEditDate="2021-09-21T05:13:43.857" LastActivityDate="2021-09-21T17:18:07.657" Title="Windows is not present in grub menu" Tags="|system|dual-boot|microsoft-windows|release-odin|uefi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28861" PostTypeId="2" ParentId="28792" CreationDate="2021-09-21T13:25:37.943" Score="0" Body="&lt;p&gt;Me too, happened after a reset, i found by going to advanced options before booting elementary os, by choosing a different version, both displays work&lt;/p&gt;&#xA;" OwnerUserId="27066" LastActivityDate="2021-09-21T13:25:37.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28862" PostTypeId="2" ParentId="24972" CreationDate="2021-09-21T14:08:04.793" Score="1" Body="&lt;p&gt;I suggest you to use the Dark Reader extension for web browser.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://darkreader.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://darkreader.org/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="16936" LastActivityDate="2021-09-21T14:08:04.793" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28863" PostTypeId="2" ParentId="28860" CreationDate="2021-09-21T17:18:07.657" Score="1" Body="&lt;p&gt;This is an issue not directly related to eOS, and so you are probably better off asking at other (more frequented) places, or searching those places for an answer. This post on Ask Ubuntu might be what you are looking for: &lt;a href=&quot;https://askubuntu.com/questions/217904/unable-to-boot-into-windows-after-installing-ubuntu-how-to-fix&quot;&gt;https://askubuntu.com/questions/217904/unable-to-boot-into-windows-after-installing-ubuntu-how-to-fix&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If that doesn't work or would take too much time (plus you've mentioned a clean install not being a problem), I would just format the whole disk and start with a fresh install of Win 10 (or 11), and take it from there.&lt;/p&gt;&#xA;" OwnerUserId="25608" LastActivityDate="2021-09-21T17:18:07.657" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28869" PostTypeId="1" AcceptedAnswerId="28918" CreationDate="2021-09-22T12:43:55.080" Score="0" ViewCount="1139" Body="&lt;p&gt;I'm using elementary OS 6 Odin. My system just updated to 5.11.0-36-generic kernel.&lt;/p&gt;&#xA;&lt;p&gt;I do use the manufacturer's wifi driver, specifically broadcom-sta-dkms for BCM43228 model. Since it depends on linux-image and linux-headers to be recompiled, every time the system updates the kernel it goes without network. With no wired network near me, the only choice I have is doing everything offline - a nightmare.&lt;/p&gt;&#xA;&lt;p&gt;So, there is a way to include linux-image and linux-headers to kernel updates?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="27073" LastEditorUserId="27073" LastEditDate="2021-09-23T12:26:22.033" LastActivityDate="2021-09-28T06:31:55.630" Title="Automatically install &quot;linux-image&quot; and &quot;linux-headers&quot; on kernel updates" Tags="|kernel|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28870" PostTypeId="2" ParentId="28792" CreationDate="2021-09-22T14:05:27.700" Score="0" Body="&lt;p&gt;My monitors worked after I switched monitor 2 from a connection with a display port to an HDMI.&lt;/p&gt;&#xA;" OwnerUserId="26976" LastActivityDate="2021-09-22T14:05:27.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28871" PostTypeId="1" CreationDate="2021-09-22T17:27:01.013" Score="0" ViewCount="20" Body="&lt;p&gt;When booting from iso i get a login requirement how do get around this?&lt;a href=&quot;https://i.stack.imgur.com/Orz4B.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Orz4B.jpg&quot; alt=&quot;booting from iso&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27075" LastActivityDate="2021-09-22T17:27:01.013" Title="Installation Steps" Tags="|system-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28873" PostTypeId="2" ParentId="2443" CreationDate="2021-09-22T22:12:14.423" Score="0" Body="&lt;p&gt;This is caused by graphics driver update.&#xA;In my case, &lt;strong&gt;nvidia-340&lt;/strong&gt;(&lt;em&gt;put your graphics driver name here&lt;/em&gt;) driver patch update case this problem.&lt;/p&gt;&#xA;&lt;p&gt;Simple solution that I follow is,&lt;/p&gt;&#xA;&lt;p&gt;First of all, login in your tty shell by &lt;code&gt;Ctl+Alt+F1&lt;/code&gt;&#xA;And run following commands,&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;remove graphics driver&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt remove nvidia-340&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;reinstall elementary-desktop&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get install --reinstall elementary-desktop&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;reboot the system&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="27080" LastActivityDate="2021-09-22T22:12:14.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28874" PostTypeId="1" CreationDate="2021-09-22T23:11:04.933" Score="0" ViewCount="123" Body="&lt;p&gt;I have an error when I try to dual boot Odin alongside windows 10. It says:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;ERROR: configuring bootloader error: command failed with exit status: exit status 1&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried several solutions that I found over the internet but none of them is working. Here is a link to the video of the error screen of the installer, in case it helps:&#xA;&lt;a href=&quot;https://we.tl/t-DPYWJyRpas&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://we.tl/t-DPYWJyRpas&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27009" LastActivityDate="2021-09-22T23:11:04.933" Title="Installation issue with dual boot" Tags="|system-installation|dual-boot|install|error|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28875" PostTypeId="1" CreationDate="2021-09-23T05:37:29.737" Score="0" ViewCount="887" Body="&lt;p&gt;I installed OS 6 Odin today on a 2013 MacBook Pro Retina. When I try to connect to WiFi networks, all I can see are options for VPN and Proxy.&lt;/p&gt;&#xA;&lt;p&gt;How can I connect to my WiFi network?&lt;/p&gt;&#xA;&lt;p&gt;in response to matigo:&#xA;First, thank you for the help.&#xA;Second, my sudo lspci output says I have a &amp;quot;Broadcom BCM4360 801.11ac ... (rev 03)&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="27081" LastEditorUserId="27081" LastEditDate="2021-09-24T04:37:01.577" LastActivityDate="2021-09-29T09:10:27.277" Title="My macOS install can not see any WiFi networks. What do I do?" Tags="|wifi|macbook|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28877" PostTypeId="1" CreationDate="2021-09-23T14:32:22.880" Score="0" ViewCount="42" Body="&lt;p&gt;So a few days ago I had my system freeze completely. Waited a good 20 minutes to see if it would unfreeze, but it did not. I was forced to shut down my machine by holding down the power button on my tower. This caused some form of booting issue though.&lt;/p&gt;&#xA;&lt;p&gt;If I let my machine boot regularly, I'm just hit with a black screen where I'm supposed to enter my password to enter my DE. Things seems to be running normally besides the black screen, as I do have access to my media via Plex and such. Can't really do much with a black screen though.&lt;/p&gt;&#xA;&lt;p&gt;I tried accessing GRUB and boot with an older kernel (5.11.0-27-generic, according to uname -a) instead of the latest current one (If I'm not mistaken, that one is -32 or -34). With the old kernel it boots just fine, but if I try the latest one, the black screen is there. Can't really use the old kernel indefinitely as I can't update packages, like my GPU drivers and the like as I'm hit with an error message if I try.&lt;/p&gt;&#xA;&lt;p&gt;I've tried some google, but all I was able to find were black screens in relations to fresh installs of Ubuntu, which doesn't really apply to my situation. I also found a suggestion to reinstall GRUB, which I did and it did not resolve this issue.&lt;/p&gt;&#xA;&lt;p&gt;I'm running Elementary OS 6. Any help to get this resolved would be greatly appreciated. Would prefer not having to reinstall my OS, at least for a few more weeks as I'm currently studying and don't really want to set up my lab environment all over again as that's quite the time sink.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="27086" LastActivityDate="2021-09-23T14:32:22.880" Title="Booting to black screen after system freeze" Tags="|boot|black-screen|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28880" PostTypeId="1" CreationDate="2021-09-24T05:30:27.580" Score="0" ViewCount="73" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/MJyXj.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/MJyXj.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;How do I get past this error gpio_aaeon? I am trying to boot into a live USB of Elementary OS v -6.0-stable.202108 on a R7 5800X , 6700XT b550-a strix&lt;/p&gt;&#xA;" OwnerUserId="27089" LastActivityDate="2024-02-12T07:06:35.863" Title="gpio_aaeon when booting into live usb" Tags="|boot|kernel|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28881" PostTypeId="1" CreationDate="2021-09-24T06:47:37.997" Score="0" ViewCount="52" Body="&lt;p&gt;I've just started looking at Elementary OS. I like its simplicity (even if it drives me crazy at times) but I just don't understand WHY there is no &lt;strong&gt;Connect Server&lt;/strong&gt; option in the File manager when you open &lt;strong&gt;Files&lt;/strong&gt; as administrator.&#xA;[Edit: Inspired by Jeremy's comment, let me add that I &lt;strong&gt;KNOW&lt;/strong&gt; why I want to attach while administrator, and leave it at that. I'll trust you understand that I know I won't be able to attach to the remote as administrator, and have to log in as an ordinary user.]&lt;/p&gt;&#xA;&lt;p&gt;In fact, I could live with this - I'm happy enough to type &lt;code&gt;sftp://user@destination/&lt;/code&gt; in the location bar - but when I do that I get a message that Files is &amp;quot;Unable to Mount Folder&amp;quot; etc.&#xA;Why?&#xA;I have to resort to using the command line - hardly in keeping of what I THOUGHT the &amp;quot;keep it simple&amp;quot; Elementary OS philosophy was.&#xA;Anyway, if someone could tell me the rationale for&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Not having the  &lt;strong&gt;Connect Server&lt;/strong&gt; option in the File manager when you open &lt;strong&gt;Files&lt;/strong&gt; as administrator (is it because it doesn't work?)&lt;/li&gt;&#xA;&lt;li&gt;Why do I get the &amp;quot;Unable to Mount Folder&amp;quot; message?&lt;/li&gt;&#xA;&lt;li&gt;Or tell me I'm missing something fundamental.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I'd be very grateful.&lt;/p&gt;&#xA;&lt;p&gt;I've included the screendump below to show that the CLI version works perfectly well, while the GUI option fails, even when the URI is entered correctly.  BTW - the GUI option works perfectly well when NOT logged in as as administrator.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Fyz7k.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Fyz7k.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27048" LastEditorUserId="27048" LastEditDate="2021-09-25T21:22:42.393" LastActivityDate="2021-09-27T09:58:26.363" Title="Why can't I connect to a server when administrator?" Tags="|pantheon-files|files|ssh|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28882" PostTypeId="2" ParentId="28880" CreationDate="2021-09-24T12:41:37.727" Score="0" Body="&lt;p&gt;The gpio_aaeon driver was added in more recent kernel versions. You would need to update the kernel after installing elementary with &lt;code&gt;sudo apt install linux-generic-hwe-20.04&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;To solve it until you install elementary, you need to press e when the &amp;quot;Install elementary&amp;quot; grub prompt appears and go to the line that says &lt;code&gt;quiet splash&lt;/code&gt; and write instead &lt;code&gt;quiet modprobe.blacklist=gpio_aaeon splash&lt;/code&gt;. Then you can continue to boot the system.&lt;/p&gt;&#xA;" OwnerUserId="3018" LastActivityDate="2021-09-24T12:41:37.727" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28883" PostTypeId="1" CreationDate="2021-09-24T17:24:52.077" Score="2" ViewCount="89" Body="&lt;p&gt;I have been using elementary OS 6 since it got released without many issues.&lt;/p&gt;&#xA;&lt;p&gt;I updated the system through the app center yesterday, and was prompted to reboot.&lt;/p&gt;&#xA;&lt;p&gt;After rebooting, the greeter goes into a loop. I can't log in, it just keeps flashing and starting up again. I barely see my user account and the mouse cursor for a second before it starts up again (basically flashes black, and then I see the top bar and a second later, I see my user account, then it goes black again)&lt;/p&gt;&#xA;&lt;p&gt;I can't even go into TTY and log into my user account through the CLI. When I hit &lt;code&gt;ctrl&lt;/code&gt; + &lt;code&gt;alt&lt;/code&gt; + &lt;code&gt;F7&lt;/code&gt;, I see the CLI login prompt for a second and then I am immediately taken back to the greeter where I see the same loop.&lt;/p&gt;&#xA;&lt;p&gt;I tried the following so far.&lt;/p&gt;&#xA;&lt;p&gt;I booted into a recovery kernel and dropped down to root shell, then I uninstalled the NVIDIA graphics driver by running &lt;code&gt;apt-get remove --purge nvidia-*&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;This did not help. The only differences now are that the time I see the greeter top bar before it loops again is shorter, and I don't see the user account anymore; it flashes black and loops directly after the top bar appears.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;important details&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I hadn't updated since two weeks before updating yesterday because I haven't used the laptop since a while, so there was a load of new OS updates.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the laptop has an NVIDIA GeForce GTX 1070 GPU&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It's not a hardware problem because I successfully booted into a live boot session of Ubuntu through a USB thumb drive with Ubuntu 20.04 burnt on it&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="27096" LastActivityDate="2021-09-24T17:24:52.077" Title="eOS 6: Greeter looping and doesn't allow me to login after recent update" Tags="|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28886" PostTypeId="1" CreationDate="2021-09-24T21:29:21.113" Score="0" ViewCount="161" Body="&lt;p&gt;I have eOS 6 Odin installed.&#xA;On Windows I have the auto switch for dark and light themes. Along with this, all the apps that have option for switching between themes also changing their themes accordingly to the system-wide theme.&lt;/p&gt;&#xA;&lt;p&gt;On eOS we have similar - theme is changing on schedule. But the same apps just know nothing about current system theme state (theme is changing on schedule).&lt;/p&gt;&#xA;&lt;p&gt;My question: what parameter do applications look at to change their theme (in which file)?&lt;/p&gt;&#xA;" OwnerUserId="27012" LastActivityDate="2024-02-12T08:08:41.080" Title="Auto switch to dark theme and back in apps and browser" Tags="|themes|thirdpartyapps|eos6|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28888" PostTypeId="2" ParentId="28875" CreationDate="2021-09-24T23:26:17.560" Score="1" Body="&lt;p&gt;I experienced a similar issue on a MBP mid-2012 recently - Bluetooth recognised but no WiFi. My adapter is a BCM4331.&lt;/p&gt;&#xA;&lt;p&gt;Running &lt;code&gt;dmesg&lt;/code&gt; in the terminal revealed a message suggesting visiting &lt;a href=&quot;https://wireless.wiki.kernel.org/en/users/Drivers/b43&quot; rel=&quot;nofollow noreferrer&quot;&gt;wireless.wiki.kernel.org&lt;/a&gt; for Broadcom drivers.&lt;/p&gt;&#xA;&lt;p&gt;That website states your BCM4360 Broadcom WiFi adapter is unsupported, however there is a possible solution involving propietary drivers (covered further down).&lt;/p&gt;&#xA;&lt;h2&gt;Installing b43&lt;/h2&gt;&#xA;&lt;p&gt;This driver works pretty well, however it doesn't &lt;a href=&quot;https://askubuntu.com/questions/664094/cant-connect-to-wifi-5ghz-with-broadcom-corporation-bcm4311&quot;&gt;support 5GHz networks&lt;/a&gt; and during my usage I found it would drop the connection intermittently.&lt;/p&gt;&#xA;&lt;p&gt;To install the b43 driver, run the following command in a terminal&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# apt install firmware-b43-installer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and rebooting eOS&lt;/p&gt;&#xA;&lt;h2&gt;Installing wl&lt;/h2&gt;&#xA;&lt;p&gt;This is the propietary driver available from Broadcom, with full feature support. This hasn't been extensively tested by myself as I've only recently got this working. &lt;a href=&quot;https://wiki.debian.org/InstallingDebianOn/Apple/MacBookPro/9-2&quot; rel=&quot;nofollow noreferrer&quot;&gt;Debian's Mac documentation&lt;/a&gt; was extremely helpful.&lt;/p&gt;&#xA;&lt;p&gt;Install your kernel's headers and the propietary driver sources:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# apt install linux-headers-generic-hwe-20.04 &amp;amp;&amp;amp; sudo apt install broadcom-sta-common broadcom-sta-source broadcom-sta-dkms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;(If you are not running Ubuntu 20.04 or Elementary OS 6, replace the &lt;code&gt;linux-headers-generic-hwe-20.04&lt;/code&gt; package with &lt;code&gt;linux-headers-$(uname -r)&lt;/code&gt;. Do note that this alternative method requires you to fetch new headers manually when the kernel is updated, otherwise your WiFi will stop working)&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once installation is complete, unload the old kernel modules for the modem:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# modprobe -r b43&#xA;# modprobe -r bcma&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;To prevent these modules from reloading on boot, create a new &lt;code&gt;blacklist-b43.conf&lt;/code&gt; file in &lt;code&gt;/etc/modprobe.d/&lt;/code&gt; with the following contents:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;blacklist b43&#xA;blacklist bcma&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;At this point, you can reboot eOS.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively you can reload the wl kernel module and start using the WiFi adapter immediately:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# modprobe -r wl&#xA;# modprobe -r cfg80211&#xA;# rfkill unblock&#xA;# modprobe wl&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27098" LastEditorUserId="27098" LastEditDate="2021-09-29T09:10:27.277" LastActivityDate="2021-09-29T09:10:27.277" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28889" PostTypeId="1" CreationDate="2021-09-24T23:52:33.727" Score="1" ViewCount="13" Body="&lt;p&gt;It looks like the autostart entry that was bundled with the latest release with Calendar it's not running? At least not on my system.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cIqAc.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cIqAc.png&quot; alt=&quot;Terminal showing that there's an autostart entry at /etc/xdg/autostart&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I can always start the daemon by hand and all reminders will just work. I'm curious why is not starting as of right now. Is this an experimental thing? Will it be available in the upcoming version?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PhCci.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PhCci.png&quot; alt=&quot;elementary OS system settings screen&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27099" LastActivityDate="2021-09-24T23:52:33.727" Title="Calendar not showing notiications for event reminders" Tags="|notifications|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28892" PostTypeId="2" ParentId="28886" CreationDate="2021-09-25T04:48:31.377" Score="0" Body="&lt;p&gt;There are some solutions that you can apply, see if this this post can serve you,&#xA;&lt;a href=&quot;http://entornosgnulinux.com/2021/09/06/odin-tip-ii-tema-elementary-y-modo-oscuro-para-flatpak-en-elementary-os-odin/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://entornosgnulinux.com/2021/09/06/odin-tip-ii-tema-elementary-y-modo-oscuro-para-flatpak-en-elementary-os-odin/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27102" LastActivityDate="2021-09-25T04:48:31.377" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28896" PostTypeId="1" CreationDate="2021-09-25T17:40:29.333" Score="0" ViewCount="20" Body="&lt;p&gt;I have done my first application in the center of the window I have an image.&lt;/p&gt;&#xA;&lt;p&gt;image = new Image ();&#xA;image.set_from_file(&amp;quot;../data/pw.png&amp;quot;);&lt;/p&gt;&#xA;&lt;p&gt;that work well but after compiling and install with these commands:&lt;/p&gt;&#xA;&lt;p&gt;meson build --prefix=/usr&lt;/p&gt;&#xA;&lt;p&gt;cd build&lt;/p&gt;&#xA;&lt;p&gt;ninja&lt;/p&gt;&#xA;&lt;p&gt;ninja install&lt;/p&gt;&#xA;&lt;p&gt;the application installs but does not show the image&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/TwBpF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TwBpF.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/yZDM6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yZDM6.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I really appreciate any help, thank you, guys!&lt;/p&gt;&#xA;" OwnerUserId="27108" LastActivityDate="2024-03-01T19:02:20.317" Title="not show image after use meson and install Elementary OS App" Tags="|appimage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28897" PostTypeId="1" CreationDate="2021-09-26T00:58:03.803" Score="0" ViewCount="39" Body="&lt;p&gt;When I put my laptop to sleep, and then open it later to login, the “unlocked” screen flashes briefly before the login screen takes over. Has anyone else seen this? Do you know how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="9869" LastActivityDate="2022-12-17T23:48:22.843" Title="X1 Carbon: screen flashes when opening" Tags="|display|greeter|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28898" PostTypeId="2" ParentId="28896" CreationDate="2021-09-26T01:30:24.673" Score="0" Body="&lt;p&gt;I solved the problem by copying the image to &lt;code&gt;/usr/share/data&lt;/code&gt;. From here, the application can load the image with the following configuration in &lt;code&gt;meson.build&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Install our pw.png file so App will see it&#xA;install_data(&#xA;    'data' / 'pw.png',&#xA;    install_dir: get_option('datadir') / 'data',&#xA;    rename:'pw.png'&#xA;)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27108" LastEditorUserId="25612" LastEditDate="2021-10-13T08:26:13.183" LastActivityDate="2021-10-13T08:26:13.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28900" PostTypeId="2" ParentId="28394" CreationDate="2021-09-26T03:40:12.323" Score="-1" Body="&lt;p&gt;use &lt;code&gt;sudo io.elementary.appcenter&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="27112" LastEditorUserId="26" LastEditDate="2022-03-20T21:59:49.587" LastActivityDate="2022-03-20T21:59:49.587" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28902" PostTypeId="2" ParentId="28810" CreationDate="2021-09-26T10:29:18.297" Score="0" Body="&lt;p&gt;I got epiphany working again, after long searches in the internet, by installing the nvidia drivers for my machine.&#xA;Unfortunately I cant find the instructions again but it was basically finding out what nvidia version I had and installing them via terminal.&lt;/p&gt;&#xA;&lt;p&gt;That made epiphany work again.&lt;/p&gt;&#xA;&lt;p&gt;Update: The AppCenter now has an Uninstall button so that did the trick.&lt;/p&gt;&#xA;" OwnerUserId="26936" LastEditorUserId="26936" LastEditDate="2021-12-12T21:37:23.717" LastActivityDate="2021-12-12T21:37:23.717" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28903" PostTypeId="1" AcceptedAnswerId="28906" CreationDate="2021-09-26T16:29:53.577" Score="0" ViewCount="52" Body="&lt;p&gt;I have uninstall postgress sql from my machine with command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get --purge remove postgresql&#xA;sudo apt-get purge postgresql*&#xA;sudo apt-get --purge remove postgresql postgresql-doc postgresql-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;but when I do &lt;code&gt;sudo apt-get update&lt;/code&gt;, I still see postgress:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Hit:14 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease                                                                                            &#xA;Hit:15 http://apt.postgresql.org/pub/repos/apt bionic-pgdg InRelease &amp;lt;---                                                                                                   &#xA;Hit:16 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I remove this and everything related to postgress?&lt;/p&gt;&#xA;" OwnerUserId="20508" LastActivityDate="2021-09-27T08:43:14.983" Title="postgress still showing in apt update even after uninstall" Tags="|apt|ppa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28904" PostTypeId="1" CreationDate="2021-09-26T19:36:26.977" Score="0" ViewCount="28" Body="&lt;p&gt;I installed the loki app which is the best minimalist viewer today (it can display gif/jpg &lt;em&gt;and&lt;/em&gt; webm files, no other viewer can). [https://lowkeyviewer.com/ if you want to ckeck it out]&lt;/p&gt;&#xA;&lt;p&gt;However now Elementary wants to install this update:&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;loki MCMC linkage analysis on general pedigrees Version: 2.4.7.4-10&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;This conflicts with the app that's why I uninstalled that &amp;quot;loki MCMC linkage whatever it is&amp;quot; first.&lt;/p&gt;&#xA;&lt;p&gt;I'm happy to skip updates forever, no way I'm giving up such a good viewer.&lt;/p&gt;&#xA;&lt;p&gt;What can I do? Is there any other alternative? Can I change the name of the loki viewer to something else? I'm not a developer, I only cloned the git hub, run yarn and installed the loki .deb&lt;/p&gt;&#xA;" OwnerUserId="26936" LastActivityDate="2024-02-18T03:04:55.567" Title="How to skip an Elementary update? Conflicts with same name app" Tags="|updates|system|file-management|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28905" PostTypeId="1" CreationDate="2021-09-27T05:24:04.633" Score="2" ViewCount="176" Body="&lt;p&gt;I'm new to Elementary OS.  I would like to type in Japanese, but I can't figure it out.  I can add the option in iBus to switch to Japanese, but then it still just prints out roman characters.  Plus, with iBus, every time I log in to Elementary OS, I need to go into settings and activate iBus again.  And it doesn't let me switch the keyboards with Cntrl+Space - even though I have it configured it that way in the settings.  Is there an iBus alternative that works with Elementary OS 6?  I've looked on the internet for other answers, but all the other help topics I've been able to find are for previous versions of Elementary OS, and don't appear to work now (like this one:  &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/271/how-can-i-enable-japanese-input&quot;&gt;How can I enable Japanese input?&lt;/a&gt;).&lt;/p&gt;&#xA;&lt;p&gt;Any help would be great.  Thank you!&lt;/p&gt;&#xA;" OwnerUserId="27114" LastActivityDate="2021-10-01T08:36:05.883" Title="How do I type in Japanese in Elementary OS 6?" Tags="|language|input|ibus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28906" PostTypeId="2" ParentId="28903" CreationDate="2021-09-27T08:43:14.983" Score="2" Body="&lt;p&gt;You will need to remove the PostgreSQL source from your &lt;code&gt;apt&lt;/code&gt; list. Fortunately, it's not too difficult to do via the Terminal. Here's how you do it:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal (if it's not already open)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Change directories to &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/apt/sources.list.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;List the files in that directory:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ll &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You will see something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;total 16&#xA;drwxr-xr-x 2 root root 4096 Aug 24 13:19 ./&#xA;drwxr-xr-x 7 root root 4096 Sep  9 13:00 ../&#xA;-rw-r--r-- 1 root root  143 Aug 24 13:19 elementary.list&#xA;-rw-r--r-- 1 root root  151 Aug 24 13:19 patches.list&#xA;-rw-r--r-- 1 root root   62 Aug 24 14:18 postgres.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; The &lt;code&gt;.list&lt;/code&gt; file for PostgreSQL may be different on your system, as it depends on how you installed the software.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Now you have two options to choose from:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete the PostgreSQL &lt;code&gt;.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -f postgres.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Comment out the repository contained in the &lt;code&gt;.list&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi postgres.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use a different editor. The use of &lt;code&gt;vi&lt;/code&gt; here is personal preference, not an explicit recommendation.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;When the file is open, add a &lt;code&gt;#&lt;/code&gt; character to the start of every line. This will comment-out the repository.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Update &lt;code&gt;apt&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Now you should see that the PostgreSQL repository is no longer part of the update collection.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-27T08:43:14.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28907" PostTypeId="2" ParentId="28338" CreationDate="2021-09-27T09:50:58.350" Score="-2" Body="&lt;p&gt;Use Auto scale guest OS in Virtualbox. Problem solved&lt;/p&gt;&#xA;" OwnerUserId="27115" LastActivityDate="2021-09-27T09:50:58.350" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28908" PostTypeId="2" ParentId="28881" CreationDate="2021-09-27T09:58:26.363" Score="1" Body="&lt;p&gt;After a quick look at the code and trying out a hacked version of Files that enabled the Connect Server dialog for root I am pretty sure that the restriction is imposed by the underlying &lt;code&gt;gvfs&lt;/code&gt; system - network operations fail when run as root. Launching the Connect Server dialog when running as root caused Files to crash with the (unhelpful) message &amp;quot;Error with GVFS&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;My knowledge of the underlying system is not deep enough to be sure whether the restrictions are necessary for technical reasons or imposed for security.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-09-27T09:58:26.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28909" PostTypeId="2" ParentId="28905" CreationDate="2021-09-27T13:20:04.840" Score="2" Body="&lt;p&gt;The best way to type in Japanese on Linux in my experience is to use the &lt;code&gt;mozc&lt;/code&gt; input method. It's hidden a little bit in Elementary OS 6, but this is how you can get it working:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open &amp;quot;System Settings&amp;quot; and go to &amp;quot;Keyboard&amp;quot;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Under &amp;quot;Layout&amp;quot;, make sure the left-most list has the keyboard layouts that you have installed. I am using a Japanese keyboard, so only that one is listed.&#xA;&lt;img src=&quot;https://i.stack.imgur.com/ti92U.png&quot; alt=&quot;Keyboard — Layout&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Under &amp;quot;Input Method&amp;quot;, enable IBus (if it has disabled itself again for you)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click the + button under the list of layouts (on the left-hand side) and filter on &amp;quot;Japanese&amp;quot;:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/9l1qO.png&quot; alt=&quot;Keyboard — Input Method&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Click on &amp;quot;Japanese — Mozc&amp;quot;, then click &amp;quot;Add Engine&amp;quot;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You will now see in the upper-right corner a little widget with a capital letter &amp;quot;A&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/MhTmI.png&quot; alt=&quot;The Mozc Widget&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is how you can change your input going forward.&lt;/p&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; If you do not see the little widget, click &amp;quot;Japanese — Mozc&amp;quot; in the settings or, set the language bar in the upper-right corner.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/qYo3x.png&quot; alt=&quot;Language Bar&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Open any text editor you wish&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Ensure the little Mozc widget is set to the input that you would like:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/zjm4S.png&quot; alt=&quot;Mozc Widget — Input Type&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Give it a test:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/azQtC.png&quot; alt=&quot;What's This?&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;When this is all said and done, the Input Method &lt;em&gt;is&lt;/em&gt; remembered across reboots. You will not need to reconfigure, reinstall, or rejigger anything.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; You may want to also confirm that you have the Japanese language packs fully installed. This will ensure the autocomplete dictionaries are in place as well as a couple of decent fonts. This can be done in the &amp;quot;Language &amp;amp; Region&amp;quot; section of the system settings. Select 日本語 and just hit &amp;quot;Set Language&amp;quot;. This will not change the language of Elementary, but will instead confirm that everything has been installed.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/TFVbs.png&quot; alt=&quot;Language &amp;amp; Region — 日本語&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2021-09-27T22:27:39.203" LastActivityDate="2021-09-27T22:27:39.203" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28912" PostTypeId="1" CreationDate="2021-09-27T15:51:04.133" Score="0" ViewCount="527" Body="&lt;p&gt;I've successfully set up this account in Ubuntu using Geary, so I'm confident I've configured IMAP and my app password correctly in Google. Especially since its not failing on IMAP but explicitly on SMTP, &amp;quot;SMTP verification failed: could not log in. Please verify your credentials.&amp;quot; I've tried using another app password for the SMTP credentials, but no cigar, as Google's app password manager only says the IMAP password has been used.&lt;/p&gt;&#xA;&lt;p&gt;This is a school account hosted in gsuite, so my address doesn't end with @gmail.com, although it is still configured with imap.gmail.com and smtp.gmail.com.&lt;/p&gt;&#xA;" OwnerUserId="27117" LastActivityDate="2021-09-27T16:00:39.113" Title="Unable to setup IMAP gmail account eOS 6 Mail - &quot;SMTP verification failed&quot;" Tags="|pantheon-mail|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28913" PostTypeId="2" ParentId="28912" CreationDate="2021-09-27T16:00:39.113" Score="1" Body="&lt;p&gt;Update: Disabling my school's VPN allowed me to set up the account as I initially tried. I am new to using VPN and discovered recently that it tends to interfere with the sending of emails.&lt;/p&gt;&#xA;" OwnerUserId="27117" LastActivityDate="2021-09-27T16:00:39.113" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28915" PostTypeId="1" AcceptedAnswerId="28916" CreationDate="2021-09-27T23:44:56.350" Score="0" ViewCount="113" Body="&lt;p&gt;I had installed Grub Customizer and then removed it. I am running Odin.&lt;/p&gt;&#xA;&lt;p&gt;I get an error when checking for updates in the App Center as follows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The repository 'http//ppa.launchpad.net/-danielrichter 2007/grub-customizer/ubuntu focal release' does not have a release file.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;From looking at other questions that are similar I see that I need to delete this repository entry. My terminal skills are poor and I am not sure how to do this. Reading other answers isn't helping.&lt;/p&gt;&#xA;&lt;p&gt;I do not know how to find the entry or how to delete it.&lt;/p&gt;&#xA;&lt;p&gt;Help anyone!&lt;/p&gt;&#xA;&lt;p&gt;Rex&lt;/p&gt;&#xA;" OwnerUserId="27062" LastEditorUserId="25612" LastEditDate="2021-10-13T08:27:23.083" LastActivityDate="2021-10-13T08:27:23.083" Title="How to remove a repository entry from an app that has been removed in Odin" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28916" PostTypeId="2" ParentId="28915" CreationDate="2021-09-28T01:00:05.527" Score="0" Body="&lt;p&gt;There are two ways you can do this, both are via Terminal and — fortunately — not too complicated.&lt;/p&gt;&#xA;&lt;h4&gt;Removing a PPA via &lt;code&gt;add-apt-repository&lt;/code&gt;&lt;/h4&gt;&#xA;&lt;p&gt;If you added the repository &lt;a href=&quot;https://launchpad.net/%7Edanielrichter2007/+archive/ubuntu/grub-customizer&quot; rel=&quot;nofollow noreferrer&quot;&gt;using the steps from the Launchpad website&lt;/a&gt;, then you can remove the reference with a single line:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository --remove ppa:danielrichter2007/grub-customizer&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once removed, update &lt;code&gt;apt&lt;/code&gt; to ensure everything is good to go:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you installed the PPA through a different method, or if the above command does not work for you, then you'll need to locate the file containing the PPA reference and remove it.&lt;/p&gt;&#xA;&lt;h4&gt;Removing a Repository Manually&lt;/h4&gt;&#xA;&lt;p&gt;In Terminal, change your directory to &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; and list all of the files using &lt;code&gt;ll&lt;/code&gt;. You should see something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ ll&#xA;total 16&#xA;drwxr-xr-x 2 root root 4096 Aug 24 13:19 ./&#xA;drwxr-xr-x 7 root root 4096 Sep  9 13:00 ../&#xA;-rw-r--r-- 1 root root   62 Aug 24 14:18 danielrichter.list&#xA;-rw-r--r-- 1 root root  143 Aug 24 13:19 elementary.list&#xA;-rw-r--r-- 1 root root  151 Aug 24 13:19 patches.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The &lt;code&gt;elementary.list&lt;/code&gt; file contains repositories specific to Elementary OS. &lt;code&gt;patches.list&lt;/code&gt; contains repositories to bug fixes and whatnot. Any other files in this directory will be for software that you installed.&lt;/p&gt;&#xA;&lt;p&gt;If you're not sure which file has the reference to the &lt;code&gt;grub-customizer&lt;/code&gt; repository, you can find it with this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;grep -r danielrichter *&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will list all files in the &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; directory, as well as in any subdirectories.&lt;/p&gt;&#xA;&lt;p&gt;Now that you've identified which file contains the reference, you have two options:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Comment out the repository by adding a &lt;code&gt;#&lt;/code&gt; to the start of the line. For example, if your &lt;code&gt;.list&lt;/code&gt; file is named &lt;code&gt;danielrichter.list&lt;/code&gt;, then you can do this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano danielrichter.list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You may be prompted for your password, as &lt;code&gt;sudo&lt;/code&gt; is required to edit this file. Once the editor opens, you will see one or two lines inside referencing the PPA that you would like to remove. Add a &lt;code&gt;#&lt;/code&gt; to the start of the line(s) so that your file looks something like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/h0Kuu.jpg&quot; alt=&quot;Nano — Editing&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now you can save the file by pressing &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; to exit, and &lt;kbd&gt;Y&lt;/kbd&gt; to save the changes as you exit.&lt;/p&gt;&#xA;&lt;p&gt;Once you're out of the file, update &lt;code&gt;apt&lt;/code&gt; to ensure everything is good to go:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you ever want to &amp;quot;undo&amp;quot; the PPA removal, simply re-open the file, remove the &lt;code&gt;#&lt;/code&gt; characters, and update &lt;code&gt;apt&lt;/code&gt; again. Having lots of &lt;code&gt;.list&lt;/code&gt; files with commented-out PPAs will not affect system performance.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Delete the &lt;code&gt;.list&lt;/code&gt; file. If you have a file that contains &lt;em&gt;only&lt;/em&gt; references to the PPA you no longer want, then you can delete it completely like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo rm -f danielrichter.list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Important:&lt;/strong&gt; There is no &amp;quot;undo&amp;quot; when you use &lt;code&gt;rm&lt;/code&gt;, so be 100% sure you're deleting the correct file.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;Once the file is deleted, update &lt;code&gt;apt&lt;/code&gt; to ensure everything is good to go:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;This long answer may look complicated but, if you sit down and go through the process, I'm sure you'll see it's not too difficult. The first time is always the most stressful &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-28T01:00:05.527" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28917" PostTypeId="1" CreationDate="2021-09-28T03:09:54.450" Score="0" ViewCount="205" Body="&lt;p&gt;I have been having issues with internet connectivity for the past week trying to start up elementary os 6. I am new to Linux and am getting to the point of giving up because I'm spinning my wheels and am wasting time. Initially my ThinkpadT14 couldn't find the wifi driver. I found the github workaround (lwfinger/rtw89) for the Realtek 8852AE, which didn't work by itself. Turning off secure boot in addition to the workaround worked for a while, until my PC went to sleep. I am connected to my home network, but no longer have internet. I have tried several of the other workarounds (restarting network manager and radio wifi, etc), but they have not worked. I really want to like elementary since I'm a fan of the macOS, but am at about to pull a U-ie (U-turn) so to speak. Any input is appreciated!&lt;/p&gt;&#xA;&lt;p&gt;Edit:&#xA;Apologies for the pictures. Turns out the PC will not connect to the internet via phone hotspot tethering or ethernet so this was easier than alternatives. Also yes I outed myself as a Canadian with a U-ie reference. Next will come the Gordon Lightfoot lyrics!&lt;/p&gt;&#xA;&lt;p&gt;lspci command result&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rp1QI.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rp1QI.png&quot; alt=&quot;sudo lspci result&quot; /&gt;&lt;/a&gt;&#xA;lshw -c network result&#xA;&lt;a href=&quot;https://i.stack.imgur.com/1EvJB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1EvJB.png&quot; alt=&quot;sudo lshw -c network&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27120" LastEditorUserId="27120" LastEditDate="2021-10-05T01:07:00.477" LastActivityDate="2021-10-05T01:07:00.477" Title="Internet issues" Tags="|wifi|internet|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28918" PostTypeId="2" ParentId="28869" CreationDate="2021-09-28T06:31:55.630" Score="0" Body="&lt;p&gt;If you install a specific version of the kernel header, then the package will not be upgraded (because it's a specific version). However, if you install the generic package, then it will be updated at the same time as an update pulls down the new kernel:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should resolve the issue you have after every kernel update &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-28T06:31:55.630" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28921" PostTypeId="2" ParentId="21547" CreationDate="2021-09-28T21:39:10.590" Score="0" Body="&lt;p&gt;Another way to solve this would be to comment out a line in the &lt;code&gt;nm-applet.desktop&lt;/code&gt; file. In Terminal, do this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/autostart/nm-applet.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then add a &lt;code&gt;#&lt;/code&gt; to the line that looks like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;X-GNOME-Bugzilla-Product=NetworkManager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It should now look like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#X-GNOME-Bugzilla-Product=NetworkManager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You will probably need to log out, then log back in before this change is seen.&lt;/p&gt;&#xA;" OwnerUserId="5289" LastEditorUserId="25612" LastEditDate="2021-10-13T08:26:50.873" LastActivityDate="2021-10-13T08:26:50.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28922" PostTypeId="1" CreationDate="2021-09-29T10:03:39.130" Score="0" ViewCount="20" Body="&lt;p&gt;I switched from Hera to Odin (I did contribute this time as this is a great job!) and I have a behavior that I didn't have in previous release.&lt;/p&gt;&#xA;&lt;p&gt;I have a Dell Precision 5540 (native monitor 2160p) with an external monitor (1440p) and I close the lid to work using external monitor only.&lt;/p&gt;&#xA;&lt;p&gt;In Odin, sometimes (a pain to debug sorry) when a notification is coming, the monitor goes to black. I move my mouse very quickly (maybe for nothing), the screen is displayed after a second or two and I can see the notification in an incorrect place (top left instead of top right).&lt;/p&gt;&#xA;&lt;p&gt;It's pretty annoying... and a regression as it was not the case in previous Elementary release (same Nvidia drivers).&lt;/p&gt;&#xA;&lt;p&gt;Thanks for any help,&lt;/p&gt;&#xA;&lt;p&gt;Damien&lt;/p&gt;&#xA;" OwnerUserId="19894" LastEditorUserId="19894" LastEditDate="2021-09-29T12:41:27.707" LastActivityDate="2021-09-29T12:41:27.707" Title="Odin: External monitor + incoming notification =&gt; x server down?" Tags="|odin|monitors|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28923" PostTypeId="1" CreationDate="2021-09-29T12:46:51.487" Score="0" ViewCount="22" Body="&lt;p&gt;Is it just me? Default music app is not listed by apt package manager. If you type &lt;code&gt;apt list --installed | grep io.elementary.music&lt;/code&gt; nothing is found, but it is possible to launch app from terminal. I tried to reinstall, but nothing changed. Also, you can only install it from AppCenter since apt can not find it.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2024-02-16T18:02:55.293" Title="Default Music app invisible by apt" Tags="|apt|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28924" PostTypeId="2" ParentId="28923" CreationDate="2021-09-29T12:57:33.013" Score="0" Body="&lt;p&gt;Not sure how the previous answer came about. It's like I didn't even look at the terminal output. Either way ...&lt;/p&gt;&#xA;&lt;p&gt;The default music application is called &lt;code&gt;noise&lt;/code&gt;. You can find it like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt list | grep noise &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This was determined by uninstalling the application via the AppCenter, then reading the &lt;code&gt;apt&lt;/code&gt; history log in &lt;code&gt;/var/log/apt/history.log&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/fZq4q.jpg&quot; alt=&quot;Apt History&quot; /&gt;&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2021-09-29T13:23:52.997" LastActivityDate="2021-09-29T13:23:52.997" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28925" PostTypeId="2" ParentId="21547" CreationDate="2021-09-29T12:58:42.667" Score="0" Body="&lt;p&gt;I wouldn't recommend disabling it or you might loose some functionality for advanced WiFi settings. Simply edit file &lt;code&gt;/etc/xdg/autostart/nm-applet.desktop&lt;/code&gt; and add &lt;code&gt;--no-indicator&lt;/code&gt; flag in Exec line:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;Exec=nm-applet --no-indicator&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2021-09-29T12:58:42.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28926" PostTypeId="1" CreationDate="2021-09-29T19:26:27.980" Score="1" ViewCount="106" Body="&lt;p&gt;I had been starting to use elementary OS 6 lately (switched from Pop OS),&#xA;I installed the flatpak of Neovim version 0.5.0 from flathub like I did successfully with other few apps and it doesn't work, I didn't succeed to find any tutorial or explain to that topic.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I checked in the terminal with the command:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and saw that Neovim is appeared&#xA;&lt;a href=&quot;https://i.stack.imgur.com/WF8WW.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/WF8WW.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I also checked at ~/.var/app/io.neovim.nvim:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;ls -lah ~/.var/app/io.neovim.nvim&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CMROw.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CMROw.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;tree ~/.var/app/io.neovim.nvim&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hlPan.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hlPan.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Please, someone know what's the problem and how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="27127" LastActivityDate="2022-10-25T03:06:50.827" Title="Neovim flatpak version 0.5.0 don't work" Tags="|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28927" PostTypeId="2" ParentId="28904" CreationDate="2021-09-29T20:19:23.407" Score="0" Body="&lt;p&gt;The problem was solved by locking the package. First in Synaptic by locking the package. Then in the Terminal with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-mark hold loki&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then again with &lt;code&gt;dpkg&lt;/code&gt; for good measure:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo &amp;quot;loki hold&amp;quot; | sudo dpkg --set-selections&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now I can run all Elementary updates and my LowKey Viewer works like a dream. This solution is based on &lt;a href=&quot;https://www.linuxuprising.com/2018/10/how-to-keep-package-from-updating-in.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this Linux Uprising post&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="26936" LastEditorUserId="26936" LastEditDate="2021-09-30T15:07:31.867" LastActivityDate="2021-09-30T15:07:31.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28929" PostTypeId="1" CreationDate="2021-09-29T23:52:02.713" Score="0" ViewCount="24" Body="&lt;p&gt;Just trying to get elementaryOS installed at all. Booted off a live usb. I see the screen that says &amp;quot;boot, edit config, command line&amp;quot;, then it says something like &amp;quot;SGX disabled in bios&amp;quot;, then a bunch of garbage looking data, and then the screen goes black.&lt;/p&gt;&#xA;&lt;p&gt;Then my monitor turns off and says no signal, and every 5 seconds or so it'll turn back on, turn stay black, then turn off and say the same thing.&#xA;this is with a rtx 3060ti and a 10400. Im wondering if its an IGPU issue, but my IGPU is turned off in bios.&lt;/p&gt;&#xA;" OwnerUserId="27132" LastActivityDate="2021-09-29T23:52:02.713" Title="Intermittent Blank video signal on live usb" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28930" PostTypeId="2" ParentId="28926" CreationDate="2021-09-30T01:16:09.300" Score="1" Body="&lt;p&gt;If the Neovim application is not starting, then there is likely a missing dependency that needs to be installed on your computer.&lt;/p&gt;&#xA;&lt;p&gt;Here is how you can find out the problem:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal (if it's not already open)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Check your &lt;code&gt;syslog&lt;/code&gt; file for errors:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /var/log/syslog &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use a different editor. The use of &lt;code&gt;vi&lt;/code&gt; here is more muscle memory than an explicit recommendation.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can quickly scroll to the end of the file by pressing &lt;kbd&gt;:&lt;/kbd&gt; followed by &lt;kbd&gt;$&lt;/kbd&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Look for a message that reads:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;io.elementary.wingpanel.desktop[&amp;lt;pid&amp;gt;]: sh: 1: exec: xterm: not found &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/pP6y9.jpg&quot; alt=&quot;Terminal — Syslog&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Add the missing package via &lt;code&gt;apt&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo apt install xterm &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Launch Neovim as usual:&#xA;&lt;img src=&quot;https://i.stack.imgur.com/xvTA6.png&quot; alt=&quot;Launch Neovim&quot; /&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; If this solves your problem, feel free to click the checkmark beside the answer. This makes it easier for others who have the same problem to solve their issue. You can also press the up arrow beside an answer to mark something as useful. &lt;/sup&gt;&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-30T01:16:09.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28931" PostTypeId="2" ParentId="24159" CreationDate="2021-09-30T13:54:19.983" Score="0" Body="&lt;p&gt;The fingerprint reader for the T480s will work in eOS6, as it has a newer kernel that supports it. You &lt;em&gt;may&lt;/em&gt; need to install the Python Validity interface, though.&lt;/p&gt;&#xA;&lt;p&gt;If you're running eOS6 (or have a kernel that is 5.4.x or newer), try this:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;List your USB devices:&#xA;&lt;pre&gt;&lt;code&gt;sudo lsusb &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Look for the fingerprint reader, which may look something like:&#xA;&lt;pre&gt;&lt;code&gt;Bus 001 Device 005: ID 06cb:009a Synaptics, Inc. Metallica MIS Touch Fingerprint Reader&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;If you already have the basic PAM Validity driver installed, try to enrol a finger:&#xA;&lt;pre&gt;&lt;code&gt;fprintd-enroll&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;If this comes back with an error, install &lt;a href=&quot;https://github.com/uunicorn/python-validity&quot; rel=&quot;nofollow noreferrer&quot;&gt;the Python Validity drivers&lt;/a&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove fprintd&#xA;sudo add-apt-repository ppa:uunicorn/open-fprintd&#xA;sudo apt update&#xA;sudo apt install open-fprintd fprintd-clients python3-validity&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Once everything has finished installing, try to enrol a finger:&#xA;&lt;pre&gt;&lt;code&gt;fprintd-enroll&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;This has been successfully configured on four Lenovo ThinkPad T480s notebooks (Japanese model) running Elementary OS 6 &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-30T13:54:19.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28932" PostTypeId="2" ParentId="19542" CreationDate="2021-09-30T14:28:17.963" Score="0" Body="&lt;p&gt;This answer is very, &lt;em&gt;very&lt;/em&gt; late but, for anyone who is still struggling with the RTL8821CE and using a Linux kernel older than 5.4, you can do this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Reboot the machine and enter the UEFI/BIOS&lt;/li&gt;&#xA;&lt;li&gt;Disable &amp;quot;Secure Boot&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Boot into Elementary&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Once eOS is loaded:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Disable validation on &lt;code&gt;mokutil&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo mokutil --disable-validation&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Grab the Generic HWE kernel:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-generic-hwe-18.04&#xA;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Reinstalled the &lt;code&gt;dkms&lt;/code&gt; headers:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install --reinstall git dkms build-essential linux-headers-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Clone &lt;code&gt;tomaspinho&lt;/code&gt;'s GitHub repo for the RTL8821CE:&#xA;&lt;pre&gt;&lt;code&gt;git clone https://github.com/tomaspinho/rtl8821ce&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Change to the new directory and update some file permissions:&#xA;&lt;pre&gt;&lt;code&gt;cd rtl8821ce&#xA;chmod +x dkms-install.sh&#xA;chmod +x dkms-remove.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Compile the driver:&#xA;&lt;pre&gt;&lt;code&gt;make&#xA;sudo make install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Install the driver:&#xA;&lt;pre&gt;&lt;code&gt;sudo ./dkms-install.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Once this is done, you will have a fully operational wireless network adapter.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, installing eOS6 will have support right out of the box &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-09-30T14:28:17.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28933" PostTypeId="1" CreationDate="2021-09-30T17:39:13.597" Score="1" ViewCount="33" Body="&lt;p&gt;I just installed Odin. The switch between keyboard layouts is fine if I make the selections by clicking with the cursor, however, using any of the keyboard shortcuts to change the layout, it only switches to English (US) and not to any other keyboard layout. I tried all the shortcut options available, but it was still the same. I currently have it set on to change when pressing Shift+CapsLock.&#xA;So when the keyboard layout is set to Arabic, pressing &amp;quot;Shift+CapsLock&amp;quot; switches it to English. But when it is set to English, pressing &amp;quot;Shift+CapsLock&amp;quot; does not switch it to Arabic.&#xA;Is this a bug? Or perhaps there's a quick fix to this issue?&#xA;Thank you&lt;/p&gt;&#xA;" OwnerUserId="24970" LastActivityDate="2021-09-30T17:39:13.597" Title="Keyboard layout switches only one-way via shortcut in Odin" Tags="|keyboard-shortcuts|language|keyboard-layout|odin|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28934" PostTypeId="1" CreationDate="2021-09-30T18:18:57.237" Score="1" ViewCount="213" Body="&lt;p&gt;So I'm trying to install Steam. I've tried multiple ways.&lt;/p&gt;&#xA;&lt;p&gt;First I tried via AppCenter, but that's the Flatpak version where Proton doesn't work above a certain version. The version I need to play what I want to play is not working at all with the Flatpak version.&lt;/p&gt;&#xA;&lt;p&gt;I tried downloading the .deb from Steams Website. Crashes immediately after launching. No window pops up or anything, it just flashes on the dock.&lt;/p&gt;&#xA;&lt;p&gt;Tried &lt;code&gt;sudo apt install steam-installer&lt;/code&gt;. Crashes after updating and then refuses to start.&lt;/p&gt;&#xA;&lt;p&gt;Tried &lt;code&gt;sudo apt install steam&lt;/code&gt;. Same as above.&lt;/p&gt;&#xA;&lt;p&gt;When I try launching Steam from the terminal, this is what my terminal says:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rqi@MS759665d3526a:~$ steam&#xA;Running Steam on elementary 6 64-bit&#xA;STEAM_RUNTIME is enabled automatically&#xA;Steam runtime environment up-to-date!&#xA;Steam client's requirements are satisfied&#xA;WARNING: Using default/fallback debugger launch&#xA;/home/rqi/.steam/debian-installation/ubuntu12_32/steam -nominidumps -nobreakpad&#xA;[2021-09-30 18:10:27] Startup - updater built Sep 17 2021 04:27:28&#xA;SteamUpdateUI: An X Error occurred&#xA;X Error of failed request:  BadValue (integer parameter out of range for operation)&#xA;Major opcode of failed request:  151 (GLX)&#xA;Minor opcode of failed request:  3 (X_GLXCreateContext)&#xA;Value in failed request:  0x0&#xA;Serial number of failed request:  44&#xA;xerror_handler: X failed, continuing&#xA;Looks like steam didn't shutdown cleanly, scheduling immediate update check&#xA;[2021-09-30 18:10:27] Failed to load cached hosts file (File 'update_hosts_cached.vdf' not found), using defaults&#xA;[2021-09-30 18:10:27] Using the following download hosts for Public, Realm steamglobal&#xA;[2021-09-30 18:10:27] 1. http://media.steampowered.com, /client/, Realm 'steamglobal', weight was 1, source = 'baked in'&#xA;[2021-09-30 18:10:27] Checking for update on startup&#xA;[2021-09-30 18:10:27] Checking for available updates...&#xA;[2021-09-30 18:10:27] Downloading manifest: http://media.steampowered.com/client/steam_client_ubuntu12&#xA;[2021-09-30 18:10:28] Download skipped: /client/steam_client_ubuntu12 version 1631912732, installed version 1631912732, existing pending version 0&#xA;[2021-09-30 18:10:28] Nothing to do&#xA;[2021-09-30 18:10:28] Verifying installation...&#xA;[2021-09-30 18:10:28] Performing checksum verification of executable files&#xA;[2021-09-30 18:10:28] Verification complete&#xA;rqi@MS759665d3526a:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After that Steam disappears from Dock, never to be seen again.&lt;/p&gt;&#xA;&lt;p&gt;Never had an issue while using eOS 5.1, so I really don't understand why it refuses to work now. I have i386 enabled, so that's not the issue.&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated.&#xA;Thanks in advance.&lt;/p&gt;&#xA;&lt;p&gt;EDIT: For some reason, installing &amp;quot;nvidia-driver-460-server&amp;quot; worked, although I already had drivers installed.&lt;/p&gt;&#xA;" OwnerUserId="27137" LastEditorUserId="27137" LastEditDate="2021-09-30T21:13:53.013" LastActivityDate="2021-09-30T21:13:53.013" Title="SOLVED - Issues installing Steam" Tags="|steam|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28936" PostTypeId="1" CreationDate="2021-10-01T07:47:06.503" Score="0" ViewCount="128" Body="&lt;p&gt;I have recently installed Elementary OS 6.0 on an old machine (Dell Latitude E6400 with 8GB RAM and 256GB drive) and have been having a lot of problems with it freezing. Not having managed to track down the problem, I decided to start from scratch this morning but still have the problem.&lt;/p&gt;&#xA;&lt;p&gt;After installing I updated the system packages using AppCenter, the only changes I had made were to region, language and connecting to a wifi router. I'd made no other manual changes when the first freeze happened. That was shortly after opening Epiphany. Other than the pointer which I could move around the screen using the trackpad, the system was totally unresponsive. I tried to open a TTY session but couldn't. After waiting for about 10 minutes I used the power button to shut down.&lt;/p&gt;&#xA;&lt;p&gt;After booting again everything was fine for about a while. I installed LibreOffice from Flathub and when I opened Calc for the first time, the screen froze again. The symptoms were the same, other than moving the pointer nothing on the screen changed and I couldn't open a TTY session with the keyboard. As the clock at the top of the screen was also frozen I know that the machine was unresponsive for 17 minutes so was able narrow down the search for clues in the logs. This time the system came back by itself, but a 17 minute wait .&lt;/p&gt;&#xA;&lt;p&gt;Do the entries in the syslog below show what the problem is? and where to start fixing it? I'm not sure which of the errors would cause the freeze.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Oct  1 14:25:48 LatitudeE6400 systemd[1137]: app-flatpak-org.freedesktop.Platform.openh264-4458.scope: Succeeded.&#xA;Oct  1 14:26:31 LatitudeE6400 systemd[1137]: Started app-flatpak-org.libreoffice.LibreOffice-4889.scope.&#xA;Oct  1 14:26:32 LatitudeE6400 soffice.bin[4938]: Failed to load module &amp;quot;canberra-gtk-module&amp;quot;&#xA;Oct  1 14:26:35 LatitudeE6400 kernel: [ 3047.286991] nouveau 0000:01:00.0: fb: trapped read at 010108e000 on channel -1 [0fee0000 unknown] engine 06 [BAR] client 08 [PFIFO_READ] subclient 01 [IN] reason 00000002 [PAGE_NOT_PRESENT]&#xA;Oct  1 14:26:32 LatitudeE6400 soffice.bin[4938]: Failed to load module &amp;quot;canberra-gtk-module&amp;quot;&#xA;Oct  1 14:26:35 LatitudeE6400 soffice.bin[4953]: Failed to load module &amp;quot;canberra-gtk-module&amp;quot;&#xA;Oct  1 14:26:35 LatitudeE6400 soffice.bin[4953]: Failed to load module &amp;quot;canberra-gtk-module&amp;quot;&#xA;Oct  1 14:26:37 LatitudeE6400 gala[1400]: clutter_actor_add_effect_with_name: assertion 'CLUTTER_IS_ACTOR (self)' failed&#xA;Oct  1 14:26:37 LatitudeE6400 gala[1400]: clutter_actor_remove_child: assertion 'CLUTTER_IS_ACTOR (child)' failed&#xA;Oct  1 14:26:37 LatitudeE6400 gala[1400]: invalid (NULL) pointer instance&#xA;Oct  1 14:26:37 LatitudeE6400 gala[1400]: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;Oct  1 14:29:32 LatitudeE6400 PackageKit: daemon quit&#xA;Oct  1 14:29:32 LatitudeE6400 systemd[1]: packagekit.service: Succeeded.&#xA;Oct  1 14:30:01 LatitudeE6400 CRON[4982]: (root) CMD ([ -x /etc/init.d/anacron ] &amp;amp;&amp;amp; if [ ! -d /run/systemd/system ]; then /usr/sbin/invoke-rc.d anacron start &amp;gt;/dev/null; fi)&#xA;Oct  1 14:30:46 LatitudeE6400 systemd[1137]: app-flatpak-org.gnome.Epiphany-3526.scope: Succeeded.&#xA;Oct  1 14:31:13 LatitudeE6400 systemd-timesyncd[760]: Initial synchronization to time server [2001:67c:1560:8003::c7]:123 (ntp.ubuntu.com).&#xA;Oct  1 14:32:22 LatitudeE6400 systemd[1]: flatpak-system-helper.service: Succeeded.&#xA;Oct  1 14:35:00 LatitudeE6400 systemd[1]: Started Run anacron jobs.&#xA;Oct  1 14:35:00 LatitudeE6400 systemd[1]: anacron.service: Succeeded.&#xA;Oct  1 14:35:00 LatitudeE6400 anacron[4992]: Anacron 2.3 started on 2021-10-01&#xA;Oct  1 14:35:00 LatitudeE6400 anacron[4992]: Normal exit (0 jobs run)&#xA;Oct  1 14:40:07 LatitudeE6400 kernel: [ 3859.389546] [TTM] Buffer eviction failed&#xA;Oct  1 14:43:26 LatitudeE6400 kernel: [ 4058.818536] [TTM] Buffer eviction failed&#xA;Oct  1 14:43:27 LatitudeE6400 kernel: [ 4059.009833] rfkill: input handler enabled&#xA;Oct  1 14:43:37 LatitudeE6400 kernel: [ 4069.956040] rfkill: input handler disabled&#xA;Oct  1 14:43:38 LatitudeE6400 gala.desktop[1400]: Window manager warning: last_focus_time (4070397) is greater than comparison timestamp (3086541).  This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW.  Trying to work around...&#xA;Oct  1 14:43:40 LatitudeE6400 gala[1400]: meta_end_modal_for_plugin: assertion 'is_modal (display)' failed&#xA;Oct  1 14:43:49 LatitudeE6400 gala.desktop[1400]: Window manager warning: last_user_time (4081974) is greater than comparison timestamp (4081967).  This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW.  Trying to work around...&#xA;Oct  1 14:43:49 LatitudeE6400 gala.desktop[1400]: Window manager warning: 0x540001c appears to be one of the offending windows with a timestamp of 4081974.  Working around...&#xA;Oct  1 14:43:50 LatitudeE6400 systemd[1137]: app-flatpak-org.libreoffice.LibreOffice-4889.scope: Succeeded.```&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27138" LastEditorUserId="27138" LastEditDate="2021-10-01T11:29:22.263" LastActivityDate="2021-10-01T11:29:22.263" Title="Elementary OS 6 freezing" Tags="|release-odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28937" PostTypeId="2" ParentId="28905" CreationDate="2021-10-01T08:36:05.883" Score="0" Body="&lt;p&gt;It might be worth noting that you can't add the Mozc engine if your display language is set to Japanese (or at least I have not been able to find a way to do it). If you want the GUI to be Japanese you need to set the keyboard before changing the display language.&lt;/p&gt;&#xA;&lt;p&gt;It seems illogical but there is no input method engine available by default when the display language is set to a language which needs it.&lt;/p&gt;&#xA;" OwnerUserId="27138" LastActivityDate="2021-10-01T08:36:05.883" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28939" PostTypeId="1" AcceptedAnswerId="28953" CreationDate="2021-10-01T15:19:30.280" Score="0" ViewCount="37" Body="&lt;p&gt;Can I add a shortcut key for context commands (right-click commands)?&lt;/p&gt;&#xA;&lt;p&gt;For example, I want to add a shortcut key for &lt;code&gt;Open In --&amp;gt; Terminal&lt;/code&gt; in the Files application. Can I, perhaps, add a shortcut to a &lt;code&gt;.contract&lt;/code&gt; entry?&lt;/p&gt;&#xA;" OwnerUserId="27142" LastEditorUserId="27142" LastEditDate="2021-10-01T15:28:27.643" LastActivityDate="2021-10-05T14:22:23.397" Title="Is it possible to add a shortcut key for a context command?" Tags="|pantheon-files|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28940" PostTypeId="1" CreationDate="2021-10-01T16:35:20.600" Score="0" ViewCount="35" Body="&lt;p&gt;Buen día, hace poco he instalado el Elementary os 6, y hace unos dias cada vez que enciendo mi pc y abro algún  programa como por ejemplo Brave, la pc se queda congelada y no puedo hacer nada, el cursor del mouse y el sonido continúan normal, pero la imagen queda congelada, tengo que apagar mi laptop presionando 10 segundos el botón de encendido, porque no encuentro otra manera de arreglaro. 'Como puedo solucionarlo?&lt;/p&gt;&#xA;&lt;p&gt;Mi laptop es una dell g5 5505, tiene 16 gb de ram y 100 gb de ssd para linux, el resto para windows. Por favor ayúdenme, ya arruiné un pendrive por tener que apagar a la fuerza mi pc.&lt;/p&gt;&#xA;&lt;p&gt;Good morning, I recently installed the Elementary os 6, and a few days ago every time I turn on my pc and open a program such as Brave, the pc is frozen and I can not do anything, the mouse cursor and sound continue normal, but the image is frozen, I have to turn off my laptop by pressing 10 seconds the power button, because I can not find another way to fix it. How can I fix it?&lt;/p&gt;&#xA;&lt;p&gt;My laptop is a dell g5 5505, it has 16 gb of ram and 100 gb of ssd for linux, the rest for windows. Please help me, I already ruined a flash drive by having to forcefully turn off my pc.&lt;/p&gt;&#xA;" OwnerUserId="27143" LastActivityDate="2021-10-01T16:35:20.600" Title="Elementary Os 6 Odin se me queda congelado siempre que inicio" Tags="|odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28942" PostTypeId="2" ParentId="28547" CreationDate="2021-10-01T20:31:02.673" Score="3" Body="&lt;p&gt;I found only one solution is &lt;strong&gt;downgrade&lt;/strong&gt; file manager to prev version &lt;strong&gt;4.5.0&lt;/strong&gt; where it is possible use double-click.&lt;/p&gt;&#xA;&lt;p&gt;To do this follow the next instruction:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1.&lt;/strong&gt; Remove current file manager&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove pantheon-files&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;2.&lt;/strong&gt; Download source code 4.5.0 version from link &lt;a href=&quot;https://github.com/elementary/files/releases/tag/4.5.0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/releases/tag/4.5.0&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3.&lt;/strong&gt; Install all packages to compile file manager from source code&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install meson valac libcanberra-dev libcloudproviders-dev libdbus-glib-1-dev libgail-3-dev libgee-0.8-dev libgit2-glib-1.0-dev libglib2.0-dev libgranite-dev libgtk-3-dev libhandy-1-dev libnotify-dev libpango1.0-dev libplank-dev libsqlite3-dev libunity-dev libzeitgeist-2.0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;4.&lt;/strong&gt; In source code folder run the next commands&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson build --prefix=/usr&#xA;cd build&#xA;ninja&#xA;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;5.&lt;/strong&gt; Now you have file manager 4.5.0 version that can be used with double click. To enable this option you need run&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set io.elementary.files.preferences single-click false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;6.&lt;/strong&gt; Remove packages installed to compile file manager before.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove meson valac libcanberra-dev libcloudproviders-dev libdbus-glib-1-dev libgail-3-dev libgee-0.8-dev libgit2-glib-1.0-dev libglib2.0-dev libgranite-dev libgtk-3-dev libhandy-1-dev libnotify-dev libpango1.0-dev libplank-dev libsqlite3-dev libunity-dev libzeitgeist-2.0-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now you can use elementary os file manages with double click.&lt;/p&gt;&#xA;" OwnerUserId="27146" LastEditorUserId="27146" LastEditDate="2021-10-11T06:12:01.060" LastActivityDate="2021-10-11T06:12:01.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28943" PostTypeId="2" ParentId="28242" CreationDate="2021-10-01T21:35:37.533" Score="0" Body="&lt;p&gt;and I confirm that I had the same problem with the installation in Czech, but if I install the system in English &lt;em&gt;then&lt;/em&gt; change the system to Czech, everything works correctly.&lt;/p&gt;&#xA;&lt;p&gt;Thanks to &amp;quot;m94a&amp;quot; for the advice here :-)&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Original Message:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Ahoj všem, a potvrzuji že jsem měl ten samý problém s instalací v CZ, ale při instalaci v ENG všechno proběhlo korektně, a při prvním spuštění systému jsem zvolil nastavení do CZ a všechno funguje. Díky &amp;quot;m94a&amp;quot; za rady zde :-)&lt;/p&gt;&#xA;&lt;p&gt;izi&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="27147" LastEditorUserId="25612" LastEditDate="2021-10-13T08:26:42.890" LastActivityDate="2021-10-13T08:26:42.890" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28944" PostTypeId="1" AcceptedAnswerId="28959" CreationDate="2021-10-02T11:12:48.147" Score="1" ViewCount="230" Body="&lt;p&gt;I am trying to get Elementary OS to allow logins of accounts on OpenLDAP but haven't succeeded and would be grateful if anyone could give me any pointers on how to troubleshoot.&lt;/p&gt;&#xA;&lt;p&gt;The OpenLDAP server is running and has been in use for some time with Mac clients but this is the first Linux client I've tried to connect.&lt;/p&gt;&#xA;&lt;p&gt;I think the LDAP client itself is configured correctly because if I run&#xA;&lt;code&gt;ldapsearch -x -LLL -H ldap://ldap.example.com -b 'dc=ldap,dc=example,dc=com'&lt;/code&gt;&#xA;(obviously with my own domain not example.com) I get details of all the ldap users as I'd expect.&lt;/p&gt;&#xA;&lt;p&gt;If I try to login as one of those users I get &amp;quot;user &lt;em&gt;[user]&lt;/em&gt; does not exist&amp;quot; if I use su in Terminal or &amp;quot;Login incorrect&amp;quot; if I try from a tty session.&lt;/p&gt;&#xA;&lt;p&gt;Instructions on configuration vary depending on distribution so I've probably missed something but in addition to LDAP itself, I've done the following:&#xA;edited /etc/nsswitch.conf adding &amp;quot;ldap&amp;quot; to 3 lines which now read:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;passwd:   files systemd ldap&#xA;group:    files systemd ldap&#xA;shadow:   files ldap&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;edited /etc/pam.d/common-password to remove &amp;quot;use_authtok&amp;quot; from the password line including pam_ldap so it now reads:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;password   [success=1 user_unknown=ignore default=die] pam_ldap.so try_first_pass&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;edited /etc/pam.d/common-session just to create a home directory on first login.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;In my original post I'd made an incorrect assumption. I thought he fact that &lt;em&gt;ldapsearch&lt;/em&gt; returned valid results meant that LDAP itself was correctly configured but it seems that's not the case.&lt;/p&gt;&#xA;&lt;p&gt;In /var/log/auth.log I found&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;systemd-sysusers: nss_ldap: could not connect to any LDAP server as [DN] - Can't contact LDAP server&#xA;systemd-sysusers: nss_ldap: failed to bind to LDAP server ldap://[IPaddress]; Can't contact LDAP server&#xA;systemd-sysusers: nss_ldap: reconnecting to LDAP server...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;repeated many times before changing to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bus-daemon: nss_ldap: could not connect to any LDAP server as [DN] - Can't contact LDAP server&#xA;bus-daemon: nss_ldap: failed to bind to LDAP server ldap://[IPaddress]; Can't contact LDAP server&#xA;bus-daemon: nss_ldap: reconnecting to LDAP server...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;with some intermittent&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rsyslogd: nss_ldap: could not connect to any LDAP server as [DN] - Can't contact LDAP server&#xA;rsyslogd: nss_ldap: failed to bind to LDAP server ldap://[IPaddress]; Can't contact LDAP server&#xA;rsyslogd: nss_ldap: could not search LDAP server - Server is unavailable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried changing the configuration from ldapi to ldap as that was the protocol I used for &lt;em&gt;ldapsearch&lt;/em&gt; which looks as if it's on the right track but has not completely fixed the problem. The &lt;em&gt;systemd-sysusers&lt;/em&gt;, &lt;em&gt;rsyslogd&lt;/em&gt; and &lt;em&gt;dbus-daemon&lt;/em&gt; messages continue and similar &lt;em&gt;avahi-daemon&lt;/em&gt; and &lt;em&gt;nscd&lt;/em&gt; messages appear after booting but later, after &lt;em&gt;lightdm&lt;/em&gt; starts, the &lt;em&gt;nscd&lt;/em&gt; messages change to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;nscd: nss_ldap: failed to bind to LDAP server ldap://[IPaddress]: Invalid credentials&#xA;nscd: nss_ldap: reconnecting to LDAP server&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm now trying to find out how to insert credentials but I'd also like to know if the blocks of errors for &lt;em&gt;systemd-sysusers&lt;/em&gt;, &lt;em&gt;rsyslogd&lt;/em&gt;, &lt;em&gt;dbus-daemon&lt;/em&gt;, &lt;em&gt;avahi-daemon&lt;/em&gt; and first set of &lt;em&gt;nscd&lt;/em&gt; errors are normal and can be ignored or if there is some separate configuration I need to do to address those.&lt;/p&gt;&#xA;" OwnerUserId="27138" LastEditorUserId="3018" LastEditDate="2021-10-13T08:35:58.553" LastActivityDate="2021-10-13T08:35:58.553" Title="Troubleshooting logins for LDAP accounts" Tags="|networking|release-odin|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28945" PostTypeId="2" ParentId="28944" CreationDate="2021-10-02T11:35:25.977" Score="0" Body="&lt;p&gt;The &lt;code&gt;/etc/nsswitch.conf&lt;/code&gt; may be in error, as it should look something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;passwd: compat systemd ldap&#xA;group: compat systemd ldap&#xA;shadow: compat&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Did you remember to enable creation of the user’s home directory on first login by editing &lt;code&gt;/etc/pam.d/common-session&lt;/code&gt; to include:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;session optional pam_mkhomedir.so skel=/etc/skel umask=077&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Aside from these two points, you seem to have everything else set up correctly &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-02T11:35:25.977" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28946" PostTypeId="1" CreationDate="2021-10-02T20:47:55.743" Score="0" ViewCount="196" Body="&lt;h3&gt;Spec laptop&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Intel core I7 (hexa core) 2.6ghz&lt;/li&gt;&#xA;&lt;li&gt;Geforce GTX 1660 Ti&lt;/li&gt;&#xA;&lt;li&gt;Hp Pavilon&#xA;&lt;a href=&quot;https://i.stack.imgur.com/9MC7I.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/9MC7I.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I've been installing Elementary OS 6 using &lt;strong&gt;nomodeset&lt;/strong&gt; and &lt;strong&gt;pci=off&lt;/strong&gt;, It installed and then I installed the Nvidia driver or properties software required such an Nvidia driver. Once I finished and restart the computer, it doesn't work, it has a black screen but the volume is working so the desktop is there but w/o video.&lt;/p&gt;&#xA;&lt;p&gt;I have to change the boot menu again to &lt;strong&gt;nomodeset&lt;/strong&gt;to see something but I don't know what else I have to install.&lt;/p&gt;&#xA;&lt;p&gt;Please help , sorry if I didn't give you more information, let me know what other data you need&lt;/p&gt;&#xA;&lt;h3&gt;Updates 03-OCt-2021&lt;/h3&gt;&#xA;&lt;p&gt;After install nvidia-460 My laptop screen is still black (actually has the hp logo all the time ) but I can connect a 2nd screen using HDMI and it works, not sure what the issue is , help please!&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;nvidia-smi&lt;/code&gt; output&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Sun Oct  3 17:29:23 2021       &#xA;+-----------------------------------------------------------------------------+&#xA;| NVIDIA-SMI 460.91.03    Driver Version: 460.91.03    CUDA Version: 11.2     |&#xA;|-------------------------------+----------------------+----------------------+&#xA;| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |&#xA;| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |&#xA;|                               |                      |               MIG M. |&#xA;|===============================+======================+======================|&#xA;|   0  GeForce GTX 166...  Off  | 00000000:01:00.0  On |                  N/A |&#xA;| N/A   43C    P8     4W /  N/A |    320MiB /  5944MiB |      1%      Default |&#xA;|                               |                      |                  N/A |&#xA;+-------------------------------+----------------------+----------------------+&#xA;                                                                               &#xA;+-----------------------------------------------------------------------------+&#xA;| Processes:                                                                  |&#xA;|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |&#xA;|        ID   ID                                                   Usage      |&#xA;|=============================================================================|&#xA;|    0   N/A  N/A       887      G   /usr/lib/xorg/Xorg                136MiB |&#xA;|    0   N/A  N/A      1408      G   gala                              120MiB |&#xA;|    0   N/A  N/A      2085      G   ...AAAAAAAAA= --shared-files       60MiB |&#xA;+-----------------------------------------------------------------------------+&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;xrandr&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767&#xA;HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 598mm x 336mm&#xA;   1920x1080     74.97*+  60.00    59.94    50.00  &#xA;   1680x1050     59.95  &#xA;   1440x900      59.89  &#xA;   1280x1024     60.02  &#xA;   1280x800      59.81  &#xA;   1280x720      60.00    59.94    50.00  &#xA;   1152x864      75.00  &#xA;   1024x768      70.07    60.00  &#xA;   800x600       60.32    56.25  &#xA;   720x576       50.00  &#xA;   720x480       59.94  &#xA;   640x480       59.94    59.93  &#xA;DP-0 disconnected (normal left inverted right x axis y axis)&#xA;DP-1 disconnected (normal left inverted right x axis y axis)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;Update oct-3-2021 3:44 pm&lt;/h3&gt;&#xA;&lt;p&gt;I just figured it out that prime is the problem, if i used nvidia or nvidia on demand for prime nvidia config, the laptop screen doesn't work but if I used the intel model with modeset only work the laptop screen. At least, the NVIDIA prime recognized the screen but it's still black.. any help is received please!!&lt;/p&gt;&#xA;&lt;p&gt;I test those:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1212787/external-monitor-connected-via-hdmi-doesnt-work-on-ubuntu-16-04-intel-hd-nv&quot;&gt;https://askubuntu.com/questions/1212787/external-monitor-connected-via-hdmi-doesnt-work-on-ubuntu-16-04-intel-hd-nv&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/1105332/external-monitor-not-working-ubuntu-nvidia&quot;&gt;https://askubuntu.com/questions/1105332/external-monitor-not-working-ubuntu-nvidia&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/166224/how-do-i-install-the-intel-graphics-driver-in-my-system&quot;&gt;https://askubuntu.com/questions/166224/how-do-i-install-the-intel-graphics-driver-in-my-system&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/UrbanVampire/missing-firmware-fix&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/UrbanVampire/missing-firmware-fix&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Install nvidia 470 and it's working as 460 no changes&lt;/p&gt;&#xA;&lt;h3&gt;Update oct-7-2021&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I tried to install the intel and nvidia version for POP OS distro and I had the same result you could work with one screen or the other but not both at the same time. at this point, I think this is an issue with linux and I won't be able to fix it (at least with  knowledge)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;:(&lt;/p&gt;&#xA;" OwnerUserId="27150" LastEditorUserId="27150" LastEditDate="2021-10-07T13:11:05.407" LastActivityDate="2021-10-07T13:11:05.407" Title="Issues installing Elementary OS 6 using HP Intel Pavilon" Tags="|system-installation|software-installation|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28947" PostTypeId="1" AcceptedAnswerId="28964" CreationDate="2021-10-03T03:20:33.407" Score="0" ViewCount="53" Body="&lt;p&gt;I want to install elementary on my laptop (Acer Aspire One D257-N578Qrr, 6x9 inches, don’t know the resolution of my unit exactly but I looked up the model and it’s supposed to be 1024x768) but the screen is too small to show the buttons I need to click on. The Install button is too low for my screen to show it—-after I choose the language I want, I only see the demo, erase and install, and custom install options but not the button at the bottom you need to click on to move you to the next step of the installation process. I don’t know of a way to scroll down or make the whole display smaller to fit my monitor. Help, please?&lt;/p&gt;&#xA;" OwnerUserId="27151" LastEditorUserId="27151" LastEditDate="2021-10-06T06:57:59.223" LastActivityDate="2021-10-06T11:49:49.203" Title="Installation: how to make the display smaller?" Tags="|display|" AnswerCount="1" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28948" PostTypeId="1" CreationDate="2021-10-03T09:14:44.160" Score="0" ViewCount="83" Body="&lt;p&gt;As I remember, eOS5 was such a gracious operating system that you could rely on for doing any kind of daily work. Odin is better for sure but some things like Flatpak are annoying. I installed Odin with 31 GB of space I thought it will be enough but now after 3 months the Flatpak is increasingly filling the storage and I am not sure even I should clean it up myself. I had the same applications on Hera with 20 GB, I can say it was doing well.&#xA;How can I perform a clean-up for this purpose?&#xA;&lt;a href=&quot;https://i.stack.imgur.com/AtjDE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AtjDE.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25112" LastEditorUserId="11700" LastEditDate="2023-11-18T18:41:02.817" LastActivityDate="2023-12-18T19:03:40.550" Title="Flatpak is getting a lot of storage" Tags="|flatpak|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28950" PostTypeId="2" ParentId="28897" CreationDate="2021-10-04T21:01:44.383" Score="1" Body="&lt;p&gt;I fixed this with the following system settings. &amp;quot;When lid is closed&amp;quot;: &amp;quot;Lock&amp;quot;. (Before, I had it set to &amp;quot;Suspend&amp;quot;.)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Y9sOR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y9sOR.png&quot; alt=&quot;Power Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9869" LastActivityDate="2021-10-04T21:01:44.383" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28952" PostTypeId="1" CreationDate="2021-10-05T10:11:06.537" Score="0" ViewCount="60" Body="&lt;p&gt;I was cleaning up my home directory to free up some storage space, I came across these files are they safe to delete?&lt;/p&gt;&#xA;&lt;p&gt;ubuntu64&lt;/p&gt;&#xA;&lt;p&gt;ubuntu64.1&lt;/p&gt;&#xA;&lt;p&gt;Ubuntu64.2&lt;/p&gt;&#xA;&lt;p&gt;Ubuntu64.3&lt;/p&gt;&#xA;&lt;p&gt;When you check the file properties it says 'debian binary package' total storage space they are taking up is 85 MB.&lt;/p&gt;&#xA;" OwnerUserId="27160" LastActivityDate="2024-02-23T08:03:35.443" Title="What are these files in my Home Directory?" Tags="|home|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28953" PostTypeId="2" ParentId="28939" CreationDate="2021-10-05T14:22:23.397" Score="0" Body="&lt;p&gt;Files (like other elementary apps) does not implement customisable shortcuts. The only customisable shortcuts available are those in the Switchboard keyboard plug. So you could set up a custom shortcut to open terminal at a fixed location using the command &lt;code&gt;io.elementary.terminal -w &amp;lt;full-path-to-directory&amp;gt;&lt;/code&gt;, but implementing a shortcut to open the current directory in Terminal would require significant changes to Files code.  Requests for changes to Files should be made at &lt;a href=&quot;https://github.com/elementary/files/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/issues&lt;/a&gt; for consideration.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-10-05T14:22:23.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28955" PostTypeId="2" ParentId="28948" CreationDate="2021-10-05T18:52:01.043" Score="0" Body="&lt;p&gt;What Flatpack lovers don't tell you is that you can have three small apps, like baobab, for example, each maintained by the developer in a different GNOME environment, so the first app is using &amp;quot;GNOME Application Platform version 40&amp;quot; as a repo, the second one is using &amp;quot;GNOME Application Platform version 41&amp;quot; and the third is using &amp;quot;GNOME Application Platform version 3.36&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;This &amp;quot;brilliantly&amp;quot; results in three apps, with .deb versions having just a few MB's combined, taking up about 1.5GB of your drive since you have to install all those environments to get them. It's like you need a small KDE app and you end up with the full KDE environment.&lt;/p&gt;&#xA;&lt;p&gt;Long live Flatpak!&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-05T18:52:01.043" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28956" PostTypeId="1" CreationDate="2021-10-05T19:55:53.207" Score="0" ViewCount="10" Body="&lt;p&gt;I’m getting date warnings from different parts of the OS:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Multiple websites give warnings about SSLs being out of date&lt;/li&gt;&#xA;&lt;li&gt;Cannot use the App update system as the error says there’s an SSL error&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The clock is set correctly.&lt;/p&gt;&#xA;&lt;p&gt;What should I do next to debug or try and fix the problem?&lt;/p&gt;&#xA;&lt;p&gt;Currently using OS 5.&lt;/p&gt;&#xA;" OwnerUserId="27163" LastActivityDate="2021-10-05T19:55:53.207" Title="Date warnings, cannot use web or update software" Tags="|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28957" PostTypeId="1" CreationDate="2021-10-05T23:55:05.123" Score="0" ViewCount="104" Body="&lt;p&gt;I just set up my new desktop machine yesterday and want to use Elementary as my OS. Had no trouble with the installer and was able to write the OS to my primary SSD and am writing this message from within Elementary OS 6 Odin.&lt;/p&gt;&#xA;&lt;p&gt;I've had the usual handful of teething issues with a new install but one thing I can't find a solution to which I'm sure is a software problem is that I can't get my machine to detect my Galaxy S9 over USB.&lt;/p&gt;&#xA;&lt;p&gt;I know the cable supports data transfer as I use it often on my laptop which runs Ubuntu 20.04 Focal Fossa. I tried some websearching around, installing &lt;code&gt;android-tools-adb&lt;/code&gt; etc., but that didn't help.&lt;/p&gt;&#xA;&lt;p&gt;Interestingly, it's not even detected by adb or lsusb:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; adb devices&#xA;List of devices attached&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ lsusb&#xA;Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub&#xA;Bus 001 Device 006: ID 04ca:0061 Lite-On Technology Corp. USB Optical Mouse&#xA;Bus 001 Device 004: ID 04ca:0027 Lite-On Technology Corp. USB Multimedia Keyboard&#xA;Bus 001 Device 005: ID 8087:0029 Intel Corp. &#xA;Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub&#xA;Bus 001 Device 002: ID 0b05:1939 ASUSTek Computer, Inc. AURA LED Controller&#xA;Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I also know that the USB ports I'm connecting to work as I used them to transfer files from a flash drive earlier.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="27164" LastActivityDate="2021-10-05T23:55:05.123" Title="Android device not detected on fresh Odin install" Tags="|usb|filesystem|android|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28958" PostTypeId="2" ParentId="28952" CreationDate="2021-10-06T01:31:08.870" Score="0" Body="&lt;p&gt;Those particular files do not appear to be on my installation, so I cannot tell you whether it's safe to delete them or not. That said, one easy way to determine the answer to this question would be to put them in a &lt;code&gt;.tar&lt;/code&gt; archive, remove the originals, and see if anything breaks.&lt;/p&gt;&#xA;&lt;p&gt;From Terminal:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Put the files into a Tarball archive:&#xA;&lt;pre&gt;&lt;code&gt;tar -cvf ubuntu.tar *bunt*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; &lt;code&gt;*bunt*&lt;/code&gt; is used because Linux is case-sensitive and your file list contains file names that start with lower and upper-case characters.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;Remove the existing files:&#xA;&lt;pre&gt;&lt;code&gt;rm -f *bunt*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; There is no &amp;quot;undo&amp;quot; when issuing an &lt;code&gt;rm&lt;/code&gt; command. Note that &lt;code&gt;-f&lt;/code&gt; will limit the action to files in the current directory only.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;(Optional) Compress the tarball:&#xA;&lt;pre&gt;&lt;code&gt;gzip -9 ubuntu.tar &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; The &lt;code&gt;-9&lt;/code&gt; flag will use maximum compression and take a little bit longer. If you don't mind using an extra few megabytes of storage, you can leave out the &lt;code&gt;-9&lt;/code&gt;.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;See what breaks over the next few days&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;So long as everything remains good, then you can delete the &lt;code&gt;ubuntu.tar&lt;/code&gt; file that you created. If any application starts complaining about missing files, then you can restore the originals:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;tar -xvf ubuntu.tar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; If you used &lt;code&gt;gzip&lt;/code&gt; on the tarball, be sure to expand the file again: &lt;code&gt;gzip -d ubuntu.tar.gz&lt;/code&gt;.&lt;/sup&gt;&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-06T01:31:08.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28959" PostTypeId="2" ParentId="28944" CreationDate="2021-10-06T02:09:01.537" Score="0" Body="&lt;p&gt;I solved the problem by removing the &lt;em&gt;rootbinddn&lt;/em&gt; entry from ldap.conf&lt;/p&gt;&#xA;&lt;p&gt;I had missed this because I had originally intended to bind anonymously and &lt;em&gt;binddn&lt;/em&gt; and &lt;em&gt;bindpw&lt;/em&gt; were not set.&lt;/p&gt;&#xA;" OwnerUserId="27138" LastActivityDate="2021-10-06T02:09:01.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28960" PostTypeId="1" AcceptedAnswerId="28963" CreationDate="2021-10-06T02:46:05.830" Score="0" ViewCount="158" Body="&lt;p&gt;I have LDAP running successfully and can log in successfully as an LDAP user either from tty or Terminal after logging in as another user. How can I log into the graphical environment as an LDAP user?&lt;/p&gt;&#xA;&lt;p&gt;My default admin account and a local, standard account for testing both appear on the Greeter screen after boot but LDAP users don't.&lt;/p&gt;&#xA;&lt;p&gt;My preference is to display only LDAP users who have already logged in on the machine and have a home directory rather than every user in LDAP.&lt;/p&gt;&#xA;" OwnerUserId="27138" LastActivityDate="2021-10-06T09:10:00.647" Title="How do you add LDAP users to greeter" Tags="|greeter|release-odin|user-interface|user|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28961" PostTypeId="2" ParentId="26328" CreationDate="2021-10-06T05:06:10.870" Score="0" Body="&lt;p&gt;Please see my post on &lt;a href=&quot;https://github.com/bigbigmdm/GAOMON-S620-in-LINUX&quot; rel=&quot;nofollow noreferrer&quot;&gt;GitHub&lt;/a&gt;. This is for Debian, but I think this method is good for ElementaryOS as well.&lt;/p&gt;&#xA;" OwnerUserId="27165" LastActivityDate="2021-10-06T05:06:10.870" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28963" PostTypeId="2" ParentId="28960" CreationDate="2021-10-06T09:10:00.647" Score="0" Body="&lt;p&gt;You will need to create a custom configuration file to accomplish this goal.&lt;/p&gt;&#xA;&lt;p&gt;Here's how you do it:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Create a new directory for some LightDM configurations (if it doesn't already exist):&#xA;&lt;pre&gt;&lt;code&gt;sudo mkdir /etc/lightdm/lightdm.conf.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Create a custom configuration file:&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/lightdm/lightdm.conf.d/50-custom.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Paste the following into the new file:&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;greeter-show-manual-login=true&#xA;allow-guest=false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Restart LightDM:&#xA;&lt;pre&gt;&lt;code&gt;sudo service lightdm restart&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;You will now see a &amp;quot;Manual Login&amp;quot; option at the bottom of the screen:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/SSCuK.png&quot; alt=&quot;Manual Login&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;Click on that and ...&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/UxKN9.png&quot; alt=&quot;Done&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;There you go &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-06T09:10:00.647" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28964" PostTypeId="2" ParentId="28947" CreationDate="2021-10-06T11:49:49.203" Score="0" Body="&lt;p&gt;Looking at the specifications for your computer, I’m surprised the installer loads at all. Long story short, Elementary OS will not run on your netbook.&lt;/p&gt;&#xA;&lt;p&gt;Here is a comparison of your hardware against &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;the recommended setup&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt; &lt;/th&gt;&#xA;&lt;th&gt;Recommended&lt;/th&gt;&#xA;&lt;th&gt;Your PC&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;CPU:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/td&gt;&#xA;&lt;td&gt;&lt;a href=&quot;https://ark.intel.com/content/www/us/en/ark/products/55637/intel-atom-processor-n570-1m-cache-1-66-ghz.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Intel Atom® Processor N570&lt;/a&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;RAM:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;4 GB&lt;/td&gt;&#xA;&lt;td&gt;2GB&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Storage:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;SSD with 15 GB of free space&lt;/td&gt;&#xA;&lt;td&gt;500GB 4200rpm SATA II HDD&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;&lt;strong&gt;Display:&lt;/strong&gt;&lt;/td&gt;&#xA;&lt;td&gt;1024×768 minimum&lt;/td&gt;&#xA;&lt;td&gt;1024x600&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;Even if you had a larger display, the system does not have enough RAM to handle the interface. Even if you had the RAM, your system does not have the processing power to allow a semi-smooth operation of the interface. Even if you had a recent CPU, your hard disk simply cannot move data fast enough. You will experience boot times measured in the tens of minutes, and application load times that are just as long.&lt;/p&gt;&#xA;&lt;p&gt;That said, all is not lost. If you would like to use a modern Linux distribution on your netbook, there are three options that I can recommend:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntu-mate.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Ubuntu MATE&lt;/strong&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is my favourite Debian-based desktop Linux distribution and will run on just about any 64-bit computer manufactured since 2007. If you want a UI similar to Elementary, you can choose the Pantheon theme and enjoy many of the same look and feel details that make Elementary popular. There is also a netbook-specific theme available, which will afford you even more screen space.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.bodhilinux.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Bodhi Linux&lt;/strong&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is, by far, the lightest and fastest desktop Linux I’ve used in many, many years. It’s incredibly solid, up to date, and can run on just about any Intel/AMD based system manufactured since the late 1990s. They even have a 32-bit version available, based on the Ubuntu 18.04 LTS. There are stories on the Internet of people running Bodhi on Pentium III-based systems with as little as 512MB (yes, &lt;em&gt;megabytes&lt;/em&gt;) of RAM.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://xubuntu.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Xubuntu&lt;/strong&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is an Ubuntu flavour that uses XFCE as its desktop environment, making it light-weight and fast on most hardware. Just like Bodhi, it can run on as little as 512MB RAM … though you’ll want more if you plan on using a web browser. There is a 32-bit version available, but it is not compatible with your CPU.&lt;/p&gt;&#xA;&lt;p&gt;Hopefully one of these three options will give you a working computer &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-06T11:49:49.203" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="28965" PostTypeId="1" CreationDate="2021-10-06T16:56:00.030" Score="0" ViewCount="152" Body="&lt;p&gt;Attempts to install some apps (Thunderbird in these examples) from the AppCenter fail with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Aborted due to failure (While trying to checkout 7898e3822e6f10310c8f2b6ae8aa630ed102eb1e3341c7e57e0aa9757987d2ea into /home/mg/.local/share/flatpak/runtime/org.freedesktop.Platform/x86_64/20.08/.7898e3822e6f10310c8f2b6ae8aa630ed102eb1e3341c7e57e0aa9757987d2ea-7UOQA1: Opening content object f5177de959293d7382c1995623c8ef3a389e90e48c801a2c4ef4d1ff74e1b0c3: Couldn't find file object 'f5177de959293d7382c1995623c8ef3a389e90e48c801a2c4ef4d1ff74e1b0c3')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;There's a similar error when attempting to install from flathub.org:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;While trying to checkout 7898e3822e6f10310c8f2b6ae8aa630ed102eb1e3341c7e57e0aa9757987d2ea into /home/mg/.local/share/flatpak/runtime/org.freedesktop.Platform/x86_64/20.08/.7898e3822e6f10310c8f2b6ae8aa630ed102eb1e3341c7e57e0aa9757987d2ea-4ERGA1: Opening content object f5177de959293d7382c1995623c8ef3a389e90e48c801a2c4ef4d1ff74e1b0c3: Couldn't find file object 'f5177de959293d7382c1995623c8ef3a389e90e48c801a2c4ef4d1ff74e1b0c3'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Krita also fails while Desktopius is successful. I'm left with installing (often old versions) from Synaptic.&lt;/p&gt;&#xA;" OwnerUserId="27171" LastActivityDate="2021-11-25T04:05:26.967" Title="Applications in Elementary OS 6.0 AppStore fail to install" Tags="|appcenter|release-odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28966" PostTypeId="2" ParentId="28965" CreationDate="2021-10-07T01:20:49.830" Score="1" Body="&lt;p&gt;Generally when this happens there's an error with the user profile in Flatpak. You can fix it via the Terminal like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak repair --user&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will regenerate the necessary files and directories. From there you should be able to install software properly &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-07T01:20:49.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28967" PostTypeId="1" CreationDate="2021-10-07T20:27:13.387" Score="0" ViewCount="170" Body="&lt;p&gt;Elementary 6 and Ubuntu 20.04 LTS appear to load the same Realtek driver for my card RTL8821CE. On the same laptop, WiFi with Ubuntu works without issue but with Elementary it soon disconnects.&lt;/p&gt;&#xA;&lt;p&gt;Disregard... WiFi OK now! A few restarts may have helped.&lt;/p&gt;&#xA;" OwnerDisplayName="user27173" LastEditorUserId="27174" LastEditDate="2022-03-20T21:42:35.143" LastActivityDate="2022-03-20T21:42:35.143" Title="Why does the same wifi RTL8821CE work with Ubuntu 20.04 LTS but not with Elementary 6?" Tags="|wifi|drivers|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28968" PostTypeId="2" ParentId="28967" CreationDate="2021-10-08T06:25:31.460" Score="1" Body="&lt;p&gt;There isn't quite enough information here to hazard an accurate guess, however, as of this moment in time, Ubuntu 20.04 is using the &lt;code&gt;5.11.0-37-generic&lt;/code&gt; kernel and Elementary OS 6 is using &lt;code&gt;5.11.0-36-generic&lt;/code&gt;. One difference may be stock Ubuntu's implementation of device discovery.&lt;/p&gt;&#xA;&lt;p&gt;Try this:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Use &lt;code&gt;ubuntu-drivers&lt;/code&gt; to list already installed devices:&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Alternatively, you can show devices that may need drivers like this:&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers devices&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;If you see a list of items, you may be able to auto-install any missing drivers like this:&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If this does not resolve the issue with your network device, then we'll need to look through your &lt;code&gt;/var/log/syslog&lt;/code&gt; file to see why the network may be unstable on Elementary OS &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-08T06:25:31.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28970" PostTypeId="1" CreationDate="2021-10-09T14:23:03.787" Score="0" ViewCount="41" Body="&lt;p&gt;При установке любого ядра, кроме стандартного, драйверы не работают, я также установил его через Центр приложений&lt;/p&gt;&#xA;&lt;p&gt;EOS 6&#xA;Gtx 850m&#xA;ASUS g550&lt;/p&gt;&#xA;" OwnerUserId="27180" LastEditorUserId="27180" LastEditDate="2021-10-10T17:03:46.150" LastActivityDate="2021-10-10T17:03:46.150" Title="Драйверы Nvidia не работают" Tags="|nvidia|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28971" PostTypeId="1" CreationDate="2021-10-09T16:50:24.817" Score="0" ViewCount="125" Body="&lt;p&gt;I just installed Elementary OS and inserted a Cudy WIFI USB dongle.  It doesn't show up as a device.  After poking around the internet, it appears I have to install drivers.  Rather than go through all that, I'm looking for a USB Wifi dongle that will just work out of box (i.e. plug and play).&lt;/p&gt;&#xA;&lt;p&gt;What are some dongles that are supported by Elementary out of box?  (I'm wanting it to support USB 3).&lt;/p&gt;&#xA;&lt;p&gt;I've checked Amazon and found dongles claiming to work with Linux, but upon reading the reviews people would talk about having to go through all kinds of gyrations and/or contacting tech support for installation instructions.  Again, I'm looking for dongles that are plug and play.&lt;/p&gt;&#xA;" OwnerUserId="27181" LastEditorUserId="27181" LastEditDate="2021-10-10T00:27:09.453" LastActivityDate="2024-02-27T12:06:15.793" Title="Plug and Play USB WIFI Dongles?" Tags="|wifi|drivers|usb|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28972" PostTypeId="2" ParentId="28971" CreationDate="2021-10-10T06:43:32.873" Score="0" Body="&lt;p&gt;I feel your pain since I was in the same trouble. The problem is with chipsets and not with the dongle or dongle manufacturer. Unfortunately, not a single webshop is displaying which chipset the dongle is using.&lt;/p&gt;&#xA;&lt;p&gt;My suggestion is to find a local dealer, buy a few (they are quite cheap), and just return the ones that are not working. Get the dealer to agree with the purchase return, just in case.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-10T06:43:32.873" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28973" PostTypeId="1" CreationDate="2021-10-10T21:25:03.460" Score="1" ViewCount="129" Body="&lt;p&gt;Unable to suspend laptop, it suspends but starts after 5 seconds.&#xA;tried from command, when closing lid, and from panel all the same. it starts again by itself.&#xA;any help on how to fix it will be appreciated...&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2022-04-19T13:01:25.120" Title="Unable to suspend in Odin" Tags="|suspend|odin|" AnswerCount="1" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="28974" PostTypeId="1" CreationDate="2021-10-11T10:14:20.787" Score="0" ViewCount="39" Body="&lt;p&gt;In the firefox, videos work well only on YouTube and in advertisements before videos on other sites. The videos themselves on other sites are slowing down. The problem is only in this browser, everything is fine in chrome&lt;/p&gt;&#xA;" OwnerUserId="27188" LastActivityDate="2024-02-28T18:07:15.893" Title="The video only works on YouTube (Firefox)" Tags="|firefox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28975" PostTypeId="2" ParentId="28974" CreationDate="2021-10-11T10:46:13.543" Score="0" Body="&lt;p&gt;This can happen if your machine does not have the full range of video codecs in place. This may resolve your issue:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Install &lt;code&gt;ffmpeg&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ffmpeg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;No restart is necessary.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Chrome uses its own internal codec package, so this issue isn’t seen as often.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-11T10:46:13.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28979" PostTypeId="2" ParentId="21559" CreationDate="2021-10-11T16:41:09.130" Score="0" Body="&lt;p&gt;As of elementary OS 6, the Nvidia 340.108 driver is end of life and no longer available in the Linux kernel provided.&lt;/p&gt;&#xA;&lt;p&gt;It is possible to use the Nvidia driver on Ubuntu 20.04 LTS, but because eOS 6 ships the Hardware Enablement (HWE) with a newer underlying kernel, this driver is not available on eOS 6.&lt;/p&gt;&#xA;&lt;p&gt;Your best bet is to stick with the default nouveau divers. Aside from some performance issues, the main problem with the nouveau drivers and the GeForce 320M is that wake from suspend will not work. You can disable suspend in the settings to avoid this issue.&lt;/p&gt;&#xA;&lt;p&gt;Sources&lt;/p&gt;&#xA;&lt;p&gt;If you try to install Nvidia 340.108 from App Center on eOS 6, you will get the same error described in this Kubuntu forum post:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1284266/the-installation-of-the-nvidia-display-driver-340-fails-in-kubuntu-20-10&quot;&gt;https://askubuntu.com/questions/1284266/the-installation-of-the-nvidia-display-driver-340-fails-in-kubuntu-20-10&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And here is Ubuntu Launchpad discussion that nvidia-340.108 has reached end of life from Nvidia and will no longer be included in Linux kernels past 5.10.&#xA;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-340/+bug/1872950&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers-340/+bug/1872950&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-10-11T16:41:09.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28980" PostTypeId="1" AcceptedAnswerId="28981" CreationDate="2021-10-13T05:11:59.440" Score="0" ViewCount="638" Body="&lt;p&gt;I tried to connect my Android device Redmi Note 9 Pro via USB cable to my laptop (HP laptop, 4GB RAM, Dual-Core Intel® Core™ i3-5005U CPU @ 2.00GHz) which has elementary OS Odin as host OS, but it is showing me this error:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Unable to Show Folder&lt;/strong&gt;&lt;br /&gt;&#xA;The server for this folder could not be located.&lt;/p&gt;&#xA;&lt;p&gt;The specified location is not mounted&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;a href=&quot;https://i.stack.imgur.com/qG2kG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;Original screenshot&lt;/a&gt;&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;I thought it might be an issue with some packages, so I searched through the internet, and for most of the websites I found, the solution is to install &lt;code&gt;libmtp&lt;/code&gt; and &lt;code&gt;mtpfs&lt;/code&gt;. I installed &lt;code&gt;libmtp&lt;/code&gt; and when I tried to install &lt;code&gt;mtpfs&lt;/code&gt;, it is showing me unable to locate package &lt;code&gt;mtpfs&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Also, when I tried to connect my other two Android mobiles, it simply mounted normally without any problem (I can access files and folders of the Android device).&lt;/p&gt;&#xA;&lt;p&gt;Also, my Android mobile (Redmi Node 9 Pro) is accessible (normally mounting) in Ubuntu 20.04 LTS along with the other two devices.&lt;/p&gt;&#xA;&lt;p&gt;I am attaching the error message which might help you to figure out the problem:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;home@HomeHP:~$ mtp-detect&#xA;libmtp version: 1.1.17&#xA;&#xA;Listing raw device(s)&#xA;Device 0 (VID=2717 and PID=ff40) is a Xiaomi Mi-2s (id2) (MTP).&#xA;   Found 1 device(s):&#xA;   Xiaomi: Mi-2s (id2) (MTP) (2717:ff40) @ bus 2, dev 18&#xA;Attempting to connect device(s)&#xA;error returned by libusb_claim_interface() = -6LIBMTP PANIC: Unable to initialize device&#xA;Unable to open raw device 0&#xA;OK.&#xA;home@HomeHP:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;a href=&quot;https://i.stack.imgur.com/A8VgL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;Original screenshot&lt;/a&gt;&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't know what is the problem, please help me out.&lt;/p&gt;&#xA;" OwnerUserId="27199" LastEditorUserId="10139" LastEditDate="2021-12-12T09:12:56.610" LastActivityDate="2021-12-12T09:12:56.610" Title="Android device is not mounting/accessible" Tags="|usb|mount|android|mtp|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28981" PostTypeId="2" ParentId="28980" CreationDate="2021-10-13T11:16:42.437" Score="0" Body="&lt;p&gt;I'm using Android File Transfer (&lt;a href=&quot;https://github.com/whoozle/android-file-transfer-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/whoozle/android-file-transfer-linux&lt;/a&gt;). I didn't have to in Hera but now I have the same issues as you have with, coincidently, my Xiaomi Redmi Note 9 Pro.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-13T11:16:42.437" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28982" PostTypeId="1" CreationDate="2021-10-13T11:17:09.157" Score="0" ViewCount="7" Body="&lt;p&gt;I'm using the Hera OS on an HP laptop with RAM 4, it's been 2 years since I started using it very well, but now when I turn it on, a black line at the top of the screen appears for a long time, and causes the connection to the internet to be hampered by waiting for this long black line to activate. maybe someone can help me to solve this problem, thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="26529" LastActivityDate="2021-10-13T11:17:09.157" Title="a black line at the top of the screen appears for a long time" Tags="|wifi|internet|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28983" PostTypeId="1" CreationDate="2021-10-13T12:45:27.387" Score="0" ViewCount="35" Body="&lt;p&gt;I cannot cut the notification sounds for applications like Slack or Spotify installed using sideload / flathub or a deb file.&lt;/p&gt;&#xA;&lt;p&gt;I removed the sounds of all entries in the notification menu but I still have the sounds... The only solution is to enable &amp;quot;Do not disturb&amp;quot; mode...&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to have these apps in the notification menu ?&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&lt;p&gt;Damien&lt;/p&gt;&#xA;" OwnerUserId="19894" LastActivityDate="2021-10-13T12:45:27.387" Title="Odin: How to cut notification sound of applications installed using flathub / deb?" Tags="|notifications|odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28984" PostTypeId="1" CreationDate="2021-10-13T21:14:30.377" Score="0" ViewCount="70" Body="&lt;p&gt;I've installed Elementary OS on a Macbook late 2009 in place of the High Sierra that had issues (sudden and frequent reboots), Now it works well, I like the look, but the battery that previously had about 20 min autonomy, drastically diminuished in a few days, now it's 1%, in practice it must be continuosly powered. In terminal lshw shows unknown battery, I wonder if the battery is OK only Elementary is unable to recognize it or is it ruined definitely.&#xA;If the battery is ruined, I could buy another but surely don't want to ruin it too.&#xA;Thanks in advance for any help&lt;/p&gt;&#xA;" OwnerUserId="27207" LastActivityDate="2021-10-13T21:14:30.377" Title="Elementary OS on Macbook 6.1 - big loss of battery energy" Tags="|macbook|battery|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="28988" PostTypeId="1" CreationDate="2021-10-14T15:25:04.660" Score="0" ViewCount="41" Body="&lt;p&gt;thanks for help me. I have a new PC with this configuration.&lt;/p&gt;&#xA;&lt;p&gt;Intel Core I5-11400 2.6 Ghz&#xA;Mb 1200 Gigabyte H510m - S2h&#xA;Ddr-4 16 Gb 2666 Hikvision&#xA;Ssd 512 Gb Intel 660p M.2 Nvme&lt;/p&gt;&#xA;&lt;p&gt;The installation does not start after syslinux reboot the PC. the screen &amp;quot;try or install elementary OS&amp;quot; is the only screen I see.&#xA;I tryed to install in a PC with other Gigabyte mother but with a SATA SSD and run ok. It is possible to think the problem is this Intel SSD ?&lt;/p&gt;&#xA;&lt;p&gt;I have already disabled the secure boot option.&lt;/p&gt;&#xA;&lt;p&gt;Do you have any suggestion  ?&#xA;Thanks you!!&lt;/p&gt;&#xA;" OwnerUserId="27211" LastActivityDate="2021-10-14T15:25:04.660" Title="Elementary OS Odin installation does not start" Tags="|boot|intel|ssd|odin|secure-boot|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28989" PostTypeId="1" CreationDate="2021-10-14T16:29:40.953" Score="0" ViewCount="192" Body="&lt;p&gt;I downloaded Win 11 .iso  - I now need a disk mounting app such as Etcher,  Woe-USB, etc.  However NONE of these are available on Elementary or the SNAPD store.  Anyone know what I can do as there is no MIDI software on Linux and I want to create music so I can only do this on Windows unfortunately.&lt;/p&gt;&#xA;" OwnerUserId="27213" LastActivityDate="2024-03-04T16:03:10.350" Title="Windows 11 USB creator" Tags="|usb|mount|" AnswerCount="2" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28990" PostTypeId="1" AcceptedAnswerId="28997" CreationDate="2021-10-14T22:38:04.220" Score="0" ViewCount="91" Body="&lt;p&gt;Have created mount point:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/uDv9v.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/uDv9v.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Followed by line added to fstab:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mAhq3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mAhq3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and restarted PC, but... instead of my share being connected I get this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Jsme3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Jsme3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;What is going on? please&lt;/p&gt;&#xA;&lt;p&gt;I have no problem seeing the share as root,&lt;/p&gt;&#xA;&lt;p&gt;I can connect as a user supplying pasword via network,&lt;/p&gt;&#xA;&lt;p&gt;but if I try use to open Devices I get this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/44Weu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/44Weu.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;LATER EDIT&lt;/strong&gt;&#xA;it would seem that this issue is related to a problem I had before:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28778/permissions-issue-for-email-folder-stored-on-nas&quot;&gt;permissions issue for email folder stored on NAS&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I now can mount NAS drive in elementary OS 6 but for some reason everything still remains owned by ROOT&lt;/p&gt;&#xA;&lt;p&gt;Attempts to chown so far un-succesful (i.e. I can chown anything/everything apart from the mount point)&lt;/p&gt;&#xA;&lt;p&gt;This whole experience of using network drives in Linux (and in particular in elementary OS - I didn't have these kind of problems with other distros) is very frustrating.&lt;/p&gt;&#xA;&lt;p&gt;I am still not sorted out ....&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-10-15T16:58:30.807" LastActivityDate="2021-10-16T05:40:10.857" Title="NAS share mount permission problems" Tags="|permissions|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="28991" PostTypeId="2" ParentId="28989" CreationDate="2021-10-15T05:43:22.033" Score="0" Body="&lt;p&gt;You can download Etcher from here &lt;a href=&quot;https://www.balena.io/etcher/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.balena.io/etcher/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It's an appimage file and I've never managed to make it work, but I hope you'll have a different experience.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-15T05:43:22.033" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28993" PostTypeId="1" AcceptedAnswerId="29001" CreationDate="2021-10-15T13:21:50.973" Score="0" ViewCount="44" Body="&lt;p&gt;It is telling me that:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XC6c2.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XC6c2.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any ideas, please?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-16T12:09:26.623" Title="error message when installing elementary 6" Tags="|system-installation|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="28995" PostTypeId="1" CreationDate="2021-10-15T18:50:08.797" Score="0" ViewCount="76" Body="&lt;p&gt;When installing any kernel other than the standard one, the drivers do not work, installed it through the Application Center&lt;/p&gt;&#xA;&lt;p&gt;EOS 6 Gtx 850m ASUS g550 driver 460,470&lt;/p&gt;&#xA;" OwnerUserId="27180" LastEditorUserId="27180" LastEditDate="2021-10-16T20:11:35.287" LastActivityDate="2024-03-05T05:00:30.087" Title="nvidia drivers not working with other kernel" Tags="|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28997" PostTypeId="2" ParentId="28990" CreationDate="2021-10-16T05:40:10.857" Score="0" Body="&lt;p&gt;after three days ... :-)&lt;/p&gt;&#xA;&lt;p&gt;I think I have found a solution. It is here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://ubuntuforums.org/showthread.php?t=288534&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ubuntuforums.org/showthread.php?t=288534&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you look down to the bottom of the post, you will find (in &lt;strong&gt;Troubleshooting&lt;/strong&gt;)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Files owned by root / &amp;quot;The folder contents could not be displayed&amp;quot;&lt;/strong&gt;. If you can view but not change, delete, or add new files to your Samba share, or if you get an error in Nautilus which says, &amp;quot;The folder contents could not be displayed&amp;quot; or more recently &amp;quot;You don't have permission to do that&amp;quot;; try this fix:&lt;/p&gt;&#xA;&lt;p&gt;Add gid, uid, and nounix options to your fstab line like so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;//netbiosname/sharename    /media/sharename        cifs    credentials=/root/.smbcredentials,iocharset=utf8,gid=1000,uid=1000,nounix,file_mode=0777,dir_mode=0777 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;works fine in both Hera and Odin&lt;/p&gt;&#xA;&lt;p&gt;Happy days, at last...&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-16T05:40:10.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="28998" PostTypeId="2" ParentId="28995" CreationDate="2021-10-16T06:47:22.280" Score="0" Body="&lt;p&gt;Not sure if that is the same case, but I had to install &lt;code&gt;linux-headers-generic-hwe-20.04&lt;/code&gt; (I already had &lt;code&gt;linux-image-generic-hwe-20.04&lt;/code&gt; installed) in order to have my Broadcom wifi driver &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; automatically reinstalled for each new kernel update.&lt;/p&gt;&#xA;&lt;p&gt;Before that, &lt;code&gt;bcmwl-kernel-source&lt;/code&gt; was installed only with 5.4.x kernel.&lt;/p&gt;&#xA;&lt;p&gt;Maybe I'm way off, but it's safe to try.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-16T06:47:22.280" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="28999" PostTypeId="1" CreationDate="2021-10-16T08:09:42.557" Score="1" ViewCount="48" Body="&lt;p&gt;I've been trying to use cached credentials to be able to log into an offline laptop but haven't been able to get it to work.&lt;/p&gt;&#xA;&lt;p&gt;I've installed pam_ccreds and it seems to be caching the passwords without problem. Running &lt;code&gt;sudo cc_dump&lt;/code&gt; displays a table showing salted hashes and usernames containing both the local and LDAP users which have logged in but the LDAP users in the database can't log in when the laptop is disconnected from the network.&lt;/p&gt;&#xA;&lt;p&gt;If I try to su to an LDAP user will disconnected, after entering the password it seems to succeed for about a second before failing&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;You have been logged on using cached credentials. &#xA;su: Authentication failure&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In a tty session, a message which I think is the same as the first line above flashes on the screen for a fraction of a second before returning to the login prompt.&#xA;Attempting to log in from the greeter and it just fails after entering the password. I suspect the same is happening but the message isn't visible. It appears to fail immediately in the same way an incorrect password does.&lt;/p&gt;&#xA;&lt;p&gt;The common-auth file is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# here are the primary per-package modules (the &amp;quot;Primary&amp;quot; block)&#xA;auth    [success=4 default=ignore]  pam_unix.so nullok&#xA;auth    [success=3 default=ignore]  pam_ldap.so use_first_pass&#xA;auth    [success=2 default=ignore]  pam_ccreds.so minimum_uid=1000 action=validate use_first_path&#xA;auth    [default=ignore]            pam_ccreds.so minimum_uid=1000 action=update&#xA;# here's the fallback if no module succeeds&#xA;auth    requisite                   pam_deny.so&#xA;# prime the stack with a positive return value if there isn't one already;&#xA;# this avoids us returning an error just because nothing sets a success code&#xA;# since the modules above will each just jump around&#xA;auth    required                    pam_permit.so&#xA;# and here are more per-package modules (the &amp;quot;Additional&amp;quot; block)&#xA;auth    optional                    pam_ccreds.so minimum_uid=1000 action=store&#xA;auth    optional                    pam_cap.so&#xA;# end of pam-auth-update config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Is there a problem with the common-auth file or is this being caused by something else?&lt;/p&gt;&#xA;&lt;p&gt;The common-account files is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# here are the primary per-package modules (the &amp;quot;Primary&amp;quot; block)&#xA;auth    [success=2 new_authtok_reqd=done default=ignore]  pam_unix.so&#xA;auth    [success=1 default=ignore]  pam_ldap.so&#xA;# here's the fallback if no module succeeds&#xA;auth    requisite                   pam_deny.so&#xA;# prime the stack with a positive return value if there isn't one already;&#xA;# this avoids us returning an error just because nothing sets a success code&#xA;# since the modules above will each just jump around&#xA;auth    required                    pam_permit.so&#xA;# and here are more per-package modules (the &amp;quot;Additional&amp;quot; block)&#xA;# end of pam-auth-update config&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27138" LastEditorUserId="27138" LastEditDate="2021-10-16T22:57:32.627" LastActivityDate="2021-10-16T22:57:32.627" Title="Problem logging in with cached credentials" Tags="|greeter|release-odin|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="29001" PostTypeId="2" ParentId="28993" CreationDate="2021-10-16T12:09:26.623" Score="0" Body="&lt;p&gt;Assuming, that it is indeed &amp;quot;a normal message&amp;quot; as per comment from @matigo&#xA;the problem is solved and can be closed (my installation went OK BTW)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-16T12:09:26.623" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29002" PostTypeId="2" ParentId="28989" CreationDate="2021-10-16T12:15:50.983" Score="0" Body="&lt;p&gt;You can download etcher from:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://balena.io/etcher&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://balena.io/etcher&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have done so and it works perfectly OK (for me) and is very easy to use.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/use-appimage-linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/use-appimage-linux/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-16T12:15:50.983" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29003" PostTypeId="1" CreationDate="2021-10-16T13:48:43.643" Score="1" ViewCount="557" Body="&lt;p&gt;After upgrading the Kernel to 5.11.0-37-generic, I cannot access the Elementary OS login screen whenever restarted.&lt;/p&gt;&#xA;&lt;p&gt;I will need to reboot the PC a couple of times before accessing the Elementary OS login screen.&lt;/p&gt;&#xA;&lt;p&gt;Also, in the new Elementary OS, there is no way to select the Kernel version. For example, if I want to boot with the previous Kernel, there is no option. I have tried using the Grub Customizer to manage the boot menu, but this doesn't seem to work.&lt;/p&gt;&#xA;&lt;p&gt;Is there any workaround for this?&lt;/p&gt;&#xA;" OwnerUserId="27220" LastActivityDate="2022-10-09T13:59:22.420" Title="Elementary OS 6 - The login screen goes missing" Tags="|greeter|grub|kernel|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="29004" PostTypeId="1" CreationDate="2021-10-16T18:50:37.483" Score="0" ViewCount="136" Body="&lt;p&gt;I'd like to install Elementary OS 6 on a old MacBook Pro where I succesfully installed OS 5 in the past. The laptop has a faulty discrete graphic card that has been disabled with a special EFI tool - this requires to have &lt;code&gt;radeon.modeset=0&lt;/code&gt; in the kernel parameters, otherwise boot fails with &lt;code&gt;*ERROR* UVD not responding, trying to reset the VCPU!!!&lt;/code&gt;. The solution is straightforward, but I seem unable to enter the GRUB menu when booting the installer image: neither ESC nor right shift do anything. Am I missing something?&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="17607" LastActivityDate="2024-03-05T12:01:55.200" Title="How to boot the Elementary OS 6 installer with kernel parameters?" Tags="|odin|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29005" PostTypeId="2" ParentId="28589" CreationDate="2021-10-17T00:46:29.447" Score="0" Body="&lt;p&gt;I also have issues with io.elementary.videos. The screen is distorted, sound appears to be just fine. I already installed the Ubuntu restricted extras (before that the screen was black and no playback happened at all).&#xA;The good old MPV does the job just fine, also ss stated earlier vlc works fine.&lt;/p&gt;&#xA;" OwnerUserId="25694" LastEditorUserId="25694" LastEditDate="2021-10-17T01:06:13.253" LastActivityDate="2021-10-17T01:06:13.253" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29006" PostTypeId="1" AcceptedAnswerId="29013" CreationDate="2021-10-17T02:39:49.357" Score="0" ViewCount="65" Body="&lt;p&gt;When connected to a wireless network, clicking on the network system indicator shows two buttons (with the wireless button displaying as enabled) at the top of the context menu. I can click on the wireless network to disable it. The wireless button displays as disabled and the list of access points disappears as expected.&lt;/p&gt;&#xA;&lt;p&gt;However, if I now try to enable wireless by clicking on the button again, I can't. It has no effect. It seems the button, as well as the service, is disabled. To re-enable wireless I have to go into the System Settings. Is this normal? (a bug?) or is there a problem with my installation which needs to be corrected?&lt;/p&gt;&#xA;" OwnerUserId="27138" LastActivityDate="2021-10-18T10:12:27.983" Title="Can't enable network from system indicator" Tags="|settings|system|networking|release-odin|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29007" PostTypeId="2" ParentId="27990" CreationDate="2021-10-17T06:09:32.223" Score="0" Body="&lt;h1&gt;To answer your actual question&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/users/25971&quot;&gt;@murali&lt;/a&gt; asks:&lt;/strong&gt; Does elementary os come with any native VNC server?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;No, elementary OS does not come with a GUI frontend for setting up a VNC server.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; Most likely this is not a deliberate rejection of the functionality so much as the fact that elementary OS exclusively uses its own GUI applications built from scratch in &lt;a href=&quot;https://blog.elementary.io/why-we-write-elementary-apps-in-vala/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala&lt;/a&gt;, and building a GUI frontend for setting up a VNC server is just a relatively low priority. It would be a good project for a Settings panel at some point, though.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h1&gt;To set up a VNC server anyway&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; I found this as a web search result for setting up a VNC server on elementary OS. The other results on the elementary OS StackExchange are fairly old (or vague), so I'm just going to go ahead and put extremely basic (but detailed) instructions here despite the fact that you didn't directly ask for them.&lt;/p&gt;&#xA;&lt;p&gt;We are going to use &lt;a href=&quot;https://packages.ubuntu.com/focal/x11vnc&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;x11vnc&lt;/code&gt;&lt;/a&gt;, which is a fairly simple, fairly generic VNC server that works well with Pantheon and supports connecting to the login screen (i.e. after startup and before logging in). &lt;code&gt;x11vnc&lt;/code&gt; is conveniently available from elementary OS's &lt;code&gt;apt&lt;/code&gt; repositories (which for elementary OS Odin are Canonical's repositories for Ubuntu 20.04 LTS Focal Fossa). It has &lt;a href=&quot;https://manpages.ubuntu.com/manpages/focal/en/man1/x11vnc.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;tons and tons of options&lt;/a&gt; that we're just not going to use. There are other VNC servers you can use that among other things may have commercial support. Because you're here, I'm assuming you're not using one of them, so &lt;code&gt;x11vnc&lt;/code&gt; it is.&lt;/p&gt;&#xA;&lt;p&gt;We are going to use the command line in order to keep things as simple as possible.&lt;/p&gt;&#xA;&lt;p&gt;These instructions are adapted from, among other things, &lt;a href=&quot;https://jasonschaefer.com/setup-x11vnc-server-with-systemd-auto-start-up/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt;, which worked for me.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Prerequisites&lt;/h2&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You will need &lt;code&gt;sudo&lt;/code&gt; privileges.&lt;/li&gt;&#xA;&lt;li&gt;You will need to set up OpenSSH if you haven't done so already.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; These instructions do not include steps for VNC authentication or allowing VNC through the firewall because it assumes you will use an SSH tunnel. This keeps things simple and also more secure.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;If you haven't set up SSH, in order to do so in the very most basic way with default settings, run each of the following commands in Terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install openssh-server -y&#xA;$ sudo systemctl enable ssh&#xA;$ sudo systemctl start ssh&#xA;$ sudo ufw allow ssh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Install &lt;code&gt;x11vnc&lt;/code&gt;&lt;/h2&gt;&#xA;&lt;p&gt;In Terminal (or over SSH):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install x11vnc -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Create a &lt;code&gt;systemd&lt;/code&gt; service (so &lt;code&gt;x11vnc&lt;/code&gt; runs automatically)&lt;/h2&gt;&#xA;&lt;p&gt;Open a new file in &lt;a href=&quot;https://www.nano-editor.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;nano&lt;/code&gt;&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/systemd/system/x11vnc.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Paste this into the file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Start x11vnc at startup.&#xA;After=multi-user.target&#xA;&#xA;[Service]&#xA;Type=simple&#xA;ExecStart=/usr/bin/x11vnc -auth guess -forever -loop -noxdamage -repeat -rfbport 5900 -shared -o /var/log/x11vnc.log&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save the file by typing &lt;code&gt;Ctrl-O&lt;/code&gt; and exit &lt;code&gt;nano&lt;/code&gt; by typing &lt;code&gt;Ctrl-X&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;h2&gt;Enable and start the &lt;code&gt;x11vnc&lt;/code&gt; service&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo systemctl enable x11vnc&#xA;$ sudo systemctl start x11vnc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;x11vnc&lt;/code&gt; should now be running, and it should start automatically whenever you log in locally.&lt;/p&gt;&#xA;&lt;h1&gt;To log in remotely&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; This is assuming the client machine is on the same local network as the host machine. If you are connecting to the host machine over WAN, I'll assume you already know the public hostname or IP address.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Gather the necessary information&lt;/h2&gt;&#xA;&lt;p&gt;To get the host machine's hostname, on the host machine, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ hostname&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should print the host machine's hostname, e.g. &lt;code&gt;foobar&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If, further in the instructions, the hostname doesn't work, you can use the IP address instead. To get the host machine's IP address, on the host machine, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ hostname -I&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should print all of the host machine's IP addresses, like so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;192.168.XXX.XXX [a bunch of ipv6 addresses follow]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can probably just use the first one, i.e. the ipv4 address.&lt;/p&gt;&#xA;&lt;h2&gt;Enter the information on the client computer&lt;/h2&gt;&#xA;&lt;p&gt;On the client computer, use the following information:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The hostname, e.g. &lt;code&gt;foobar&lt;/code&gt; plus &lt;code&gt;.local&lt;/code&gt;, or the IP address from above&lt;/li&gt;&#xA;&lt;li&gt;Port &lt;code&gt;22&lt;/code&gt;, i.e. SSH&lt;/li&gt;&#xA;&lt;li&gt;Whatever login information you use for SSH, which should by default be your local login username and password on the host computer&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h2&gt;Example client setup: Edovia Screens&lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; My client computer is a MacBook, and I'm using &lt;a href=&quot;https://edovia.com/en/screens-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Edovia Screens&lt;/a&gt; because &lt;a href=&quot;https://en.wikipedia.org/wiki/Screen_Sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;Apple Screen Sharing&lt;/a&gt; doesn't like the authentication we're using. Because it's what I'm using to test these instructions as I write them, the following instructions use Edovia Screens as the example. If I figure out a way to use Apple Screen Sharing I'll update these instructions. If someone with edit privileges wants to add examples for other client platforms, feel free.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;In Edovia Screens, click the &lt;code&gt;+&lt;/code&gt; icon in the toolbar and select &lt;code&gt;New Screen&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In the first popup, click &lt;code&gt;Custom...&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In the second popup, enter the information as follows:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;Name&lt;/code&gt; is the &amp;quot;pretty&amp;quot; display name for the bookmarked host computer, e.g. &lt;code&gt;Foo Bar&lt;/code&gt; (i.e. you can use capitalization and spaces)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Address or Hostname&lt;/code&gt; is the hostname or IP address from above, e.g. &lt;code&gt;foobar.local&lt;/code&gt; or &lt;code&gt;192.168.XXX.XXX&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Operating System&lt;/code&gt; is &lt;code&gt;Linux&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Authentication type&lt;/code&gt; is &lt;code&gt;None&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Click on the &lt;code&gt;Secure Connection&lt;/code&gt; tab and do the following:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Check &lt;code&gt;Enable Secure Connections&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Enter your local login username and password from the remote computer (unless you are using SSH keys)&lt;/li&gt;&#xA;&lt;li&gt;Check &lt;code&gt;Enable Secure Connections on Local Network&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Save&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Your Linux computer should now appear in the lefthand side of the main Edovia Screens window, with an illustration of &lt;a href=&quot;https://en.wikipedia.org/wiki/Tux_(mascot)&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tux&lt;/a&gt; the penguin. (This image will be replaced with a screenshot each time you close a VNC session.)&lt;/p&gt;&#xA;&lt;p&gt;To open a VNC connection to the host computer, double-click on the representation of it in the main Edovia Screens window.&lt;/p&gt;&#xA;&lt;h1&gt;Caveats&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I haven't tested this with any clients other than Edovia Screens. My apologies that I'm only testing this on a piece of paid Mac software that costs $30.&lt;/li&gt;&#xA;&lt;li&gt;This is almost certainly not the best way of doing things. It's just relatively simple and relatively secure.&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I previously wasn't sure if &lt;code&gt;x11vnc&lt;/code&gt; supported connecting to the login screen (i.e. after startup but before logging in), but I have since confirmed that it does!&lt;/li&gt;&#xA;&lt;li&gt;I haven't tested this using a host computer with multiple login (i.e. human) user accounts. If you have multiple login users on your host computer, you may have to do additional configuration.&lt;/li&gt;&#xA;&lt;li&gt;While you do need &lt;code&gt;sudo&lt;/code&gt; privileges in order to set this up, I don't know if you need &lt;code&gt;sudo&lt;/code&gt; privileges in order to log in remotely (i.e. on a managed host computer where some login users may not have &lt;code&gt;sudo&lt;/code&gt; privileges).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="27186" LastEditorUserId="27186" LastEditDate="2022-05-22T15:11:53.247" LastActivityDate="2022-05-22T15:11:53.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29008" PostTypeId="2" ParentId="29004" CreationDate="2021-10-17T06:23:41.127" Score="0" Body="&lt;p&gt;Try pressing &lt;code&gt;Shift&lt;/code&gt; key after UEFI/BIOS finished loading (not 100% sure but maybe only left &lt;code&gt;Shift&lt;/code&gt; works). This can be tricky to time it correctly so try few times if it doesn't work immediately. This should bring GRUB menu up.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-10-17T06:23:41.127" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29009" PostTypeId="1" AcceptedAnswerId="29014" CreationDate="2021-10-17T13:38:21.430" Score="0" ViewCount="45" Body="&lt;p&gt;I am used to single clicking everything and it worked fine for me in old/5/Hera,&#xA;but now I have installed 6/Odin and for some reason I have to double click to get file to open - why and what am I doing wrong?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt;&#xA;I have added .gif to better explain what I am talking about.&#xA;Hopefully it is clear:&lt;/p&gt;&#xA;&lt;p&gt;first LH click, just selects the file&lt;/p&gt;&#xA;&lt;p&gt;RH click activates dropdown menu&lt;/p&gt;&#xA;&lt;p&gt;double LH click opens a file in the default application&lt;/p&gt;&#xA;&lt;p&gt;I am used to single LH click opening the file in default application (and that is how it has worked until now in elementary OS 5 Hera)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/csGQC.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/csGQC.gif&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-10-18T11:36:28.040" LastActivityDate="2021-10-19T00:25:48.687" Title="mouse click in Odin (ve Hera)" Tags="|mouse|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29011" PostTypeId="1" CreationDate="2021-10-17T19:25:24.887" Score="0" ViewCount="30" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/zcWsL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zcWsL.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;What I should to so? Please help me thanks.&lt;/p&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2021-10-17T19:25:24.887" Title="On boot fsck ext2 issue" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29013" PostTypeId="2" ParentId="29006" CreationDate="2021-10-17T22:14:24.203" Score="0" Body="&lt;p&gt;This is a &lt;a href=&quot;http://github.com/elementary/wingpanel-indicator-network/issues/16&quot; rel=&quot;nofollow noreferrer&quot;&gt;known and confirmed bug&lt;/a&gt;, my question has been fully answered.&lt;/p&gt;&#xA;" OwnerUserId="27138" LastEditorUserId="3018" LastEditDate="2021-10-18T10:12:27.983" LastActivityDate="2021-10-18T10:12:27.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29014" PostTypeId="2" ParentId="29009" CreationDate="2021-10-19T00:25:48.687" Score="0" Body="&lt;p&gt;I have since discovered... that this neither a bug, nor my error.&lt;/p&gt;&#xA;&lt;p&gt;It would seem that this is an &amp;quot;improvement&amp;quot; - single click to navigate folders, double click to open files&lt;/p&gt;&#xA;&lt;p&gt;grrrr&lt;/p&gt;&#xA;&lt;p&gt;what's wrong with giving user an option to decide what is working for them?&lt;/p&gt;&#xA;&lt;p&gt;Even windows allow me to choose either single or doule click!&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-19T00:25:48.687" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29015" PostTypeId="1" CreationDate="2021-10-19T07:59:21.773" Score="0" ViewCount="46" Body="&lt;p&gt;I want to install a elementary os 6 on my macbook 2,1.&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately the software i staller loads a efi 64 bit bootloader into the harddrive which makes the booting progress impossible on macbook 2,1.&lt;/p&gt;&#xA;&lt;p&gt;Yes apple did that 34 bit efi bootloader on a 64bit working software for the reason to make it hard for me to use my macbook in the future and to give me the feeling to buy a new one to avoid anger.&lt;/p&gt;&#xA;&lt;p&gt;But i don’t want to give up. There must be an person on this world who can tell me how to change the iso file so that the 64 efi bootloader in the installing process gets removed by an 32 bit efi bootlader.&lt;/p&gt;&#xA;&lt;p&gt;Please give me a hint for a website or a instruction how to change the bootloader file inside of the iso file from elementary os6.&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="27245" LastActivityDate="2021-10-19T07:59:21.773" Title="Elementary os 6 and macbook 2,1" Tags="|efi|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29016" PostTypeId="1" CreationDate="2021-10-19T19:27:32.283" Score="0" ViewCount="27" Body="&lt;p&gt;Created a USB flash drive of Elementary OS 6 (&lt;code&gt;elementaryos-6.0-stable.20211005.iso&lt;/code&gt;) and attempted to boot (&lt;code&gt;option&lt;/code&gt; key at boot) into the drive on a &lt;code&gt;MacBookPro2,2&lt;/code&gt;. It appeared to be accessing the flash drive with the LED active for a while, but nothing would render to the display.&lt;/p&gt;&#xA;&lt;p&gt;I attempted to boot and edit the GRUB entry so as to remove &lt;code&gt;quiet&lt;/code&gt; and altered &lt;code&gt;splash&lt;/code&gt; to &lt;code&gt;nosplash debug --verbose&lt;/code&gt; + &lt;code&gt;F10&lt;/code&gt; (to start boot), but still no verbosity / messages to indicate what's going on or wrong with the OS initialization/startup.&lt;/p&gt;&#xA;&lt;p&gt;What can be done to diagnose this further and isolate the point of failure?&lt;/p&gt;&#xA;" OwnerUserId="3600" LastActivityDate="2021-10-20T00:50:43.757" Title="Black screen at boot of installer for MacBookPro2,2 - how to isolate point of failure?" Tags="|system-installation|release-odin|odin|live-installation|eos6|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29017" PostTypeId="2" ParentId="29016" CreationDate="2021-10-20T00:50:43.757" Score="1" Body="&lt;p&gt;The &amp;quot;point of failure&amp;quot; is likely the hardware itself, as the MacBook Pro you're using shipped in autumn 2006. Comparing the specifications of a fully loaded, top-of-the-line MacBook Pro for that year to &lt;a href=&quot;https://elementary.io/docs/installation#recommended-system-specifications&quot; rel=&quot;nofollow noreferrer&quot;&gt;the recommended hardware&lt;/a&gt; for Elementary OS we see this:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt; &lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt;MacBook Pro (2,2)&lt;/th&gt;&#xA;&lt;th style=&quot;text-align: center;&quot;&gt;Recommended&lt;/th&gt;&#xA;&lt;th&gt;Notes&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;CPU&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;Intel Core2Duo T7600 @ 2.33GHz&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;Recent Intel i3 or comparable dual-core 64-bit processor&lt;/td&gt;&#xA;&lt;td&gt;The Core2Duo is nowhere near a recent Core i3 in terms of performance.&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;RAM&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;2GB&lt;br&gt;(Upgradable to 4GB&lt;sup&gt;1&lt;/sup&gt;&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;4GB&lt;/td&gt;&#xA;&lt;td&gt;The UI for Elementary (and anything that uses Gnome) requires a good bit of memory. 4GB is the minimum if you're a patient person&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;Video&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;ATI Radeon X1600 w/256MB RAM&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;Integrated or Dedicated graphics card with 384MB RAM&lt;sup&gt;2&lt;/sup&gt;&lt;/td&gt;&#xA;&lt;td&gt;Modern Gnome-based UIs generally use about 512MB of video RAM for general computing at 1024x768. Your MacBook has a 1440x900 display, so will need a bit more.&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;Storage&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;120GB HDD&lt;br&gt;(4200RPM)&lt;/td&gt;&#xA;&lt;td style=&quot;text-align: center;&quot;&gt;32GB SSD&lt;/td&gt;&#xA;&lt;td&gt;A mobile 4200RPM drive from 2006 can generally move data at about 48MB/sec if the segments of each file are sequentially lined up on the disk (not fragmented). The slowest SSDs can generally move three times faster &lt;em&gt;at a minimum&lt;/em&gt;.&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;It's almost a certainty that the MacBook Pro you're trying to install Elementary OS onto has seen some upgrades over the past 15 years but, even with 4GB of RAM and a modern SSD&lt;sup&gt;3&lt;/sup&gt;, the system will struggle to handle the number of processes and services that Elementary (and modern Ubuntu) will try to load.&lt;/p&gt;&#xA;&lt;p&gt;Based on experience, Elementary OS needs to have a 4th Generation Core i3 or a 3rd Generation Core i5 &lt;em&gt;at a minimum&lt;/em&gt; in order to install. Atom and Pentium-based systems are pretty much non-starters regardless of how much RAM and storage is made available.&lt;/p&gt;&#xA;&lt;p&gt;With all this said, if you &lt;em&gt;really&lt;/em&gt; want to use Linux on that notebook, you may want to consider installing &lt;a href=&quot;https://ubuntu-mate.org&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu MATE&lt;/a&gt;&lt;sup&gt;4&lt;/sup&gt; and using the Pantheon theme. It's not the same experience as Elementary, but has many similar design elements. Alternatively, if you need something that is incredibly light-weight, &lt;a href=&quot;https://www.bodhilinux.com&quot; rel=&quot;nofollow noreferrer&quot;&gt;Bodhi Linux&lt;/a&gt; has become my favourite go-to for older hardware. It will run on just about anything manufactured since Y2K, including machines with graphics cards that have 128MB RAM.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;em&gt;Notes:&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;sup&gt;1&lt;/sup&gt; The MacBook Pro (2,2) &lt;em&gt;technically&lt;/em&gt; had a maximum memory limit of 3GB. However, you could get it to almost 4GB &lt;a href=&quot;https://everymac.com/systems/apple/macbook_pro/faq/macbook-pro-core-2-duo-3-gb-memory-limitation-details.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;with a bit of work&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;sup&gt;2&lt;/sup&gt; The link I had with the source of this number seems to have died at some point in the last year. However, based on experience supporting people coming to Linux with older hardware, 384MB is certainly the minimum you'll need for the graphics device. Dedicating more will only improve what you see on the screen.&lt;/p&gt;&#xA;&lt;p&gt;&lt;sup&gt;3&lt;/sup&gt; The MacBook Pro (2,2) shipped with a SATAII interface, which limits transfer speeds to 300MB/sec. Any SSD manufactured after 2009 should be able to provide this amount of throughput.&lt;/p&gt;&#xA;&lt;p&gt;&lt;sup&gt;4&lt;/sup&gt; Pronounced &lt;em&gt;mah-tay&lt;/em&gt;.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-20T00:50:43.757" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29018" PostTypeId="2" ParentId="95" CreationDate="2021-10-20T01:33:17.077" Score="0" Body="&lt;p&gt;Thank you, I was having the same problem with ElementaryOS. This is the Terminal command I ran to solve the problem:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt purge $( dpkg --list | grep -P -o &amp;quot;linux-(headers|image)-\d\S+&amp;quot; | grep -v $(uname -r | grep -P -o &amp;quot;.+\d&amp;quot;) )&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="13529" LastEditorUserId="25612" LastEditDate="2021-12-12T09:11:51.247" LastActivityDate="2021-12-12T09:11:51.247" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29019" PostTypeId="1" CreationDate="2021-10-20T05:38:20.583" Score="0" ViewCount="816" Body="&lt;p&gt;So after trying to install different distros (Ubuntu Budgie 21.04, Pop OS 21.04) with no success, I decided to give elementary OS 6 a try (I had been running elementary OS 5.1).  It installed, but the WiFi didn't show.  Anyone know how to make this work?&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-10-22T17:10:34.820" Title="Installed elementary OS 6 Odin on HP Elitebook 2570p. No WiFi. Broadcom BCM43228" Tags="|wifi|hp|odin|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29020" PostTypeId="2" ParentId="29019" CreationDate="2021-10-20T09:53:01.383" Score="1" Body="&lt;p&gt;I had a similar issue on a MacBook Air and used the instructions on &lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers&quot;&gt;AsK Ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;sudo update-pciids&#xA;sudo apt install firmware-b43-installer&#xA;sudo apt install linux-firmware&#xA;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The kernal drivers should now show in App Center.&lt;/p&gt;&#xA;" OwnerUserId="26745" LastEditorUserId="26745" LastEditDate="2021-10-22T01:41:52.347" LastActivityDate="2021-10-22T01:41:52.347" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29022" PostTypeId="1" CreationDate="2021-10-20T10:33:33.140" Score="0" ViewCount="48" Body="&lt;p&gt;I have tried to install the cups-pdf package to have PDF printer but I can't do it, is there any other way to have PDF printer in Elementary 6? Thanks&lt;/p&gt;&#xA;" OwnerUserId="27251" LastActivityDate="2024-03-11T23:05:15.580" Title="Printer pdf in Elementaruy 6" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29024" PostTypeId="1" CreationDate="2021-10-20T19:24:22.907" Score="1" ViewCount="221" Body="&lt;p&gt;I wonder if installing Nvidia proprietary drivers is a necessary step after installing Elementary OS 6.&#xA;I've been using Nvidia drivers for quite a long time but always had trouble upgrading them, sometimes needing to re-install them completely or re-install elementary os.&#xA;I've always been told they provide better performance than the open-source nouveau ones, however I'm not sure if I actually need them. I usually do basic stuff on my laptop, I don't play games for example. The only thing I do that may use GPU is photo editing. I've seen the new version of elementary os has an option to turn on GPU acceleration on applications, what does that do exactly? Does that mean the app would be running on the Nvidia card instead of the Intel GPU (ah yeah I have Optimus graphics).&#xA;One last question does Optimus actually work with the Nouveau driver, does it switch automatically between Intel and Nvidia or do I need to add env variables as with the Nvidia drivers?&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="27253" LastActivityDate="2021-10-20T19:24:22.907" Title="Is installing Nvidia proprietary drivers necessary?" Tags="|graphic-drivers|nvidia|graphics|odin|nvidia-driver|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29025" PostTypeId="1" CreationDate="2021-10-21T17:16:44.903" Score="0" ViewCount="30" Body="&lt;p&gt;I have elementary OS 6 (Odin) installed and I need to have the Greeter require a username to be typed in rather than selected from a list. Existing users should be completely hidden from anyone accessing the system.&lt;/p&gt;&#xA;&lt;p&gt;How can I do this?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;em&gt;Original Question (Spanish)&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Tengo instalado elementary os 6 odin y requiero que al presentarse la pantalla de login me permita ingresar el usuario y luego la clave. Actualmente me presenta los usuarios que tengo creados y debo seleccionar uno de ellos&lt;/p&gt;&#xA;" OwnerUserId="27256" LastEditorUserId="25612" LastEditDate="2022-03-20T21:42:23.217" LastActivityDate="2022-03-20T21:42:23.217" Title="Require Username entry on Login | Ingresar usuario y clave al iniciar la sesion" Tags="|greeter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29027" PostTypeId="1" AcceptedAnswerId="29061" CreationDate="2021-10-22T08:04:22.433" Score="0" ViewCount="76" Body="&lt;p&gt;The option to create new folder while saving a file seem to have disappeared in Odin?&lt;/p&gt;&#xA;&lt;p&gt;Am I missing something? or is it another &amp;quot;improvement&amp;quot; in Odin?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-28T08:26:26.040" Title="create new folder while saving the file (not before...)" Tags="|pantheon-files|files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29028" PostTypeId="1" CreationDate="2021-10-22T16:24:00.193" Score="0" ViewCount="147" Body="&lt;p&gt;I recently just installed Elementary and I don't really enjoy it. I'm trying to flash my USB drive with BalenaEtcher to switch to a different distro, but it won't detect my USB drive, I don't know what to do to make it detect it, Any ideas?&lt;/p&gt;&#xA;" OwnerUserId="27262" LastActivityDate="2022-08-12T05:02:35.243" Title="Balena Etcher will not Detect USB Drive on eOS" Tags="|usb-drive|usb|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29030" PostTypeId="2" ParentId="29019" CreationDate="2021-10-22T17:10:34.820" Score="0" Body="&lt;p&gt;This is a cut and paste from the link I posted above.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Installing b43&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This driver works pretty well, however it doesn't support 5GHz networks and during my usage I found it would drop the connection intermittently.&lt;/p&gt;&#xA;&lt;p&gt;To install the b43 driver, run the following command in a terminal&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;apt install firmware-b43-installer&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;and rebooting eOS&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Installing wl&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is the proprietary driver available from Broadcom, with full feature support. This hasn't been extensively tested by myself as I've only recently got this working. Debian's Mac documentation was extremely helpful.&lt;/p&gt;&#xA;&lt;p&gt;Install your kernel's headers and the propietary driver sources:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;apt install linux-headers-generic-hwe-20.04 &amp;amp;&amp;amp; sudo apt install broadcom-sta-common broadcom-sta-source broadcom-sta-dkms&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;(If you are not running Ubuntu 20.04 or Elementary OS 6, replace the &lt;em&gt;linux-headers-generic-hwe-20.04&lt;/em&gt; package with &lt;em&gt;linux-headers-$(uname -r)&lt;/em&gt;. Do note that this alternative method requires you to fetch new headers manually when the kernel is updated, otherwise your WiFi will stop working)&lt;/p&gt;&#xA;&lt;p&gt;Once installation is complete, unload the old kernel modules for the modem:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;modprobe -r b43&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;modprobe -r bcma&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;To prevent these modules from reloading on boot, create a new blacklist-b43.conf file in /etc/modprobe.d/ with the following contents:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;blacklist b43&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;blacklist bcma&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;At this point, you can reboot eOS.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively you can reload the wl kernel module and start using the WiFi adapter immediately:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;modprobe -r wl&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;modprobe -r cfg80211&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;rfkill unblock&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;modprobe wl&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2021-10-22T17:10:34.820" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29031" PostTypeId="1" CreationDate="2021-10-22T20:17:36.213" Score="0" ViewCount="212" Body="&lt;p&gt;Having trouble installing Virtualbox on Odin. I installed via apt, by entering&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install virtualbox&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;The installation output I got was the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following additional packages will be installed:&#xA;  virtualbox-qt&#xA;Suggested packages:&#xA;  vde2 virtualbox-guest-additions-iso&#xA;The following NEW packages will be installed&#xA;  virtualbox virtualbox-qt&#xA;0 to upgrade, 2 to newly install, 0 to remove and 0 not to upgrade.&#xA;Need to get 43.2 MB of archives.&#xA;After this operation, 172 MB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] &#xA;Get:1 http://mirrors.ubuntu.com/mirrors.txt Mirrorlist [896 B]&#xA;Get:2 http://mirror.pulsant.com/sites/ubuntu-archive focal-updates/multiverse amd64 virtualbox amd64 6.1.26-dfsg-3~ubuntu1.20.04.2 [21.5 MB]&#xA;Get:3 https://uk.mirrors.clouvider.net/ubuntu focal-updates/multiverse amd64 virtualbox-qt amd64 6.1.26-dfsg-3~ubuntu1.20.04.2 [21.7 MB]&#xA;Fetched 43.2 MB in 11s (4,036 kB/s)                                                                                                                         &#xA;Selecting previously unselected package virtualbox.&#xA;(Reading database ... 155450 files and directories currently installed.)&#xA;Preparing to unpack .../virtualbox_6.1.26-dfsg-3~ubuntu1.20.04.2_amd64.deb ...&#xA;Unpacking virtualbox (6.1.26-dfsg-3~ubuntu1.20.04.2) ...&#xA;Selecting previously unselected package virtualbox-qt.&#xA;Preparing to unpack .../virtualbox-qt_6.1.26-dfsg-3~ubuntu1.20.04.2_amd64.deb ...&#xA;Unpacking virtualbox-qt (6.1.26-dfsg-3~ubuntu1.20.04.2) ...&#xA;Setting up virtualbox (6.1.26-dfsg-3~ubuntu1.20.04.2) ...&#xA;Job for virtualbox.service failed because the control process exited with error code.&#xA;See &amp;quot;systemctl status virtualbox.service&amp;quot; and &amp;quot;journalctl -xe&amp;quot; for details.&#xA;invoke-rc.d: initscript virtualbox, action &amp;quot;restart&amp;quot; failed.&#xA;● virtualbox.service - LSB: VirtualBox Linux kernel module&#xA;     Loaded: loaded (/etc/init.d/virtualbox; generated)&#xA;     Active: failed (Result: exit-code) since Fri 2021-10-22 21:10:46 BST; 4ms ago&#xA;       Docs: man:systemd-sysv-generator(8)&#xA;    Process: 4105 ExecStart=/etc/init.d/virtualbox start (code=exited, status=1/FAILURE)&#xA;&#xA;Oct 22 21:10:46 TUXEDO-eOS systemd[1]: Starting LSB: VirtualBox Linux kernel module...&#xA;Oct 22 21:10:46 TUXEDO-eOS virtualbox[4105]:  * Loading VirtualBox kernel modules...&#xA;Oct 22 21:10:46 TUXEDO-eOS virtualbox[4105]:  * No suitable module for running kernel found&#xA;Oct 22 21:10:46 TUXEDO-eOS virtualbox[4105]:    ...fail!&#xA;Oct 22 21:10:46 TUXEDO-eOS systemd[1]: virtualbox.service: Control process exited, code=exited, status=1/FAILURE&#xA;Oct 22 21:10:46 TUXEDO-eOS systemd[1]: virtualbox.service: Failed with result 'exit-code'.&#xA;Oct 22 21:10:46 TUXEDO-eOS systemd[1]: Failed to start LSB: VirtualBox Linux kernel module.&#xA;Setting up virtualbox-qt (6.1.26-dfsg-3~ubuntu1.20.04.2) ...&#xA;Processing triggers for bamfdaemon (0.5.3+18.04.20180207.2-0ubuntu2) ...&#xA;Rebuilding /usr/share/applications/bamf-2.index...&#xA;Processing triggers for desktop-file-utils (0.24-1ubuntu3) ...&#xA;Processing triggers for mime-support (3.64ubuntu1) ...&#xA;Processing triggers for hicolor-icon-theme (0.17-2) ...&#xA;Processing triggers for gnome-menus (3.36.0-1ubuntu1) ...&#xA;Processing triggers for systemd (245.4-4ubuntu3.13) ...&#xA;Processing triggers for man-db (2.9.1-1) ...&#xA;Processing triggers for shared-mime-info (1.15-1) ...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Since eOS 6 is based on Ubuntu 20.04, I tried installing virtualbox the same way on a Ubuntu 20.04 installation. I was able to install virtualbox without any trouble. What is wrong here? I thought it is the same base system.&lt;/p&gt;&#xA;&lt;p&gt;Has anyone had the same problem.&#xA;Any help would be greatly appreciated!&lt;/p&gt;&#xA;" OwnerUserId="24119" LastActivityDate="2024-02-27T18:04:45.683" Title="Installing virtualbox on elementaryOS 6. Failing to start virtualbox service" Tags="|virtualbox|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29033" PostTypeId="2" ParentId="29025" CreationDate="2021-10-22T23:47:15.800" Score="1" Body="&lt;p&gt;There is a &lt;code&gt;greeter-hide-users&lt;/code&gt; switch available for use in the configuration and can be used together with &lt;code&gt;greeter-show-manual-login&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;What works for me is a &lt;code&gt;/etc/lightdm/lightdm.conf.d/50-custom.conf&lt;/code&gt; file with the following content:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;greeter-show-manual-login=true&#xA;allow-guest=false&#xA;greeter-hide-users=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27138" LastActivityDate="2021-10-22T23:47:15.800" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29034" PostTypeId="2" ParentId="28329" CreationDate="2021-10-23T08:32:03.763" Score="0" Body="&lt;p&gt;Here's a simplified approach which will work even if the above mentioned git commit is no longer available (for some reason): &lt;a href=&quot;https://github.com/swanux/plymouth_theme_elementary_legacy&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/swanux/plymouth_theme_elementary_legacy&lt;/a&gt;&#xA;You can simply install the .deb file from the releases section, and it's ready to go.&lt;/p&gt;&#xA;&lt;p&gt;Thanks to &lt;a href=&quot;https://elementaryos.stackexchange.com/a/28365/27268&quot;&gt;Keno's answer&lt;/a&gt;!&lt;/p&gt;&#xA;" OwnerUserId="27268" LastActivityDate="2021-10-23T08:32:03.763" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29035" PostTypeId="2" ParentId="8095" CreationDate="2021-10-23T08:41:35.767" Score="0" Body="&lt;p&gt;I have also written this program&lt;br /&gt;&#xA;&lt;a href=&quot;https://github.com/mlibre/hide-wingpanel&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/mlibre/hide-wingpanel&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="8252" LastActivityDate="2021-10-23T08:41:35.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29036" PostTypeId="2" ParentId="29022" CreationDate="2021-10-23T18:56:56.297" Score="0" Body="&lt;p&gt;If it is a picture, I open it in GIMP and export as .pdf&lt;/p&gt;&#xA;&lt;p&gt;If it is text document I open it in LibreOffice Writer and export it as .pdf&lt;/p&gt;&#xA;&lt;p&gt;etc...&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-23T18:56:56.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29040" PostTypeId="1" AcceptedAnswerId="29148" CreationDate="2021-10-24T14:27:58.687" Score="0" ViewCount="112" Body="&lt;p&gt;I turn on my PC and greet with the login screen. I type in my password. It takes 30-60 seconds before the wallpaper, dock and panel to show up. Before the last update (fresh installs), the desktop, docks, wallpaper, panel all loaded in 1 second.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone have any ideas what causing this?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Specs:&#xA;OS: Elementary OS 6 Odin&#xA;Motherboard: Asrock X300    &#xA;CPU: Ryzen 5 3400G&#xA;RAM: 2x8 GB DDR4-3200 MHz &#xA;Storage: Samsung P981a SSD NVMe&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure if this is a duplicate issue. I have read the old archive answer related to dbus&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;A solution (or at least temporary workaround) proposed in the bug discussion - https://bugs.launchpad.net/elementaryos/+bug/1596377 - is to rename the file:&#xA;&#xA;/etc/xdg/autostart/at-spi-dbus-bus.desktop&#xA;&#xA;to&#xA;&#xA;/etc/xdg/autostart/at-spi-dbus-bus.disabled&#xA;&#xA;This fixed it immediately for me.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I will test it tomorrow and come back with an update.&lt;/p&gt;&#xA;&lt;p&gt;Update 1: Listening to Maccer's suggestion. Here is the output on &lt;code&gt;systemd-analyze critical-chain&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;x300@X300:~$ systemd-analyze critical-chain&#xA;The time when unit became active or started is printed after the &amp;quot;@&amp;quot; character.&#xA;The time the unit took to start is printed after the &amp;quot;+&amp;quot; character.&#xA;&#xA;graphical.target @7.213s&#xA;└─multi-user.target @7.212s&#xA;  └─hddtemp.service @7.188s +23ms&#xA;    └─network-online.target @7.187s&#xA;      └─NetworkManager-wait-online.service @1.137s +6.049s&#xA;        └─NetworkManager.service @987ms +147ms&#xA;          └─dbus.service @985ms&#xA;            └─basic.target @978ms&#xA;              └─sockets.target @978ms&#xA;                └─snapd.socket @977ms +533us&#xA;                  └─sysinit.target @974ms&#xA;                    └─snapd.apparmor.service @918ms +55ms&#xA;                      └─apparmor.service @889ms +28ms&#xA;                        └─local-fs.target @888ms&#xA;                          └─run-user-1000-doc.mount @10.696s&#xA;                            └─run-user-1000.mount @9.126s&#xA;                              └─swap.target @683ms&#xA;                                └─dev-mapper-cryptswap.swap @643ms +38ms&#xA;                                  └─dev-mapper-cryptswap.device @642ms&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27278" LastEditorUserId="27278" LastEditDate="2021-10-25T04:21:41.737" LastActivityDate="2021-11-12T18:11:55.627" Title="EOS6 Cold boot loading takes too long" Tags="|boot|release-odin|" AnswerCount="1" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29041" PostTypeId="1" CreationDate="2021-10-25T09:29:18.767" Score="1" ViewCount="98" Body="&lt;p&gt;Good morning,&lt;/p&gt;&#xA;&lt;p&gt;I have only Elementary installed on my computer and I need to resize (increase) the boot partition.&#xA;That means to decrease the main partition (900GB) and then increase the other one.&lt;/p&gt;&#xA;&lt;p&gt;I have created a bootable USB, launched it, selected the &amp;quot;try&amp;quot; option and opened the Gparted. I have &amp;quot;deactivated the main partition (no lock icon next to it) and then clicked on the resize.&lt;/p&gt;&#xA;&lt;p&gt;This is when the problem arrives. I cannot change the size at all. The Gparted tells me that the minimum size is 900 GB and the maximum size is also 900 GB. This also happens when I try to do the custom install, I cannot even get past the screen where I can resize partitions. I can do only standard fresh install without changing the size of partitions.&lt;/p&gt;&#xA;&lt;p&gt;I thought that it might be because of the main partition to be encrypted. So I did the reinstallation so the main partition is not encrypted, but nothing has changed.&lt;/p&gt;&#xA;&lt;p&gt;I am also including photos of what these screens look like. Do not get fooled by the lock icon, I took the picture after I reactivated it. Normally it is not there.&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&lt;p&gt;I do not mind to to a new fresh installation again, but as mentioned above, even that (custom installation) did not help.&lt;/p&gt;&#xA;&lt;p&gt;Thank you&#xA;Peter&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/V6Fkw.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/V6Fkw.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/RBYEx.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RBYEx.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/gaAnB.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gaAnB.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27279" LastActivityDate="2021-10-25T09:29:18.767" Title="Cannot resize partition" Tags="|laptop|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29042" PostTypeId="2" ParentId="28439" CreationDate="2021-10-25T19:33:34.670" Score="0" Body="&lt;p&gt;I have observed this issue as well.&lt;/p&gt;&#xA;&lt;p&gt;Forgive, me, I'll be documenting a lot of what I've done in order to benefit future users and also so that I have a canonical source on how I do this as I'll be installing Odin on two other systems shortly.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;⚠️ &lt;strong&gt;NOTE&lt;/strong&gt;: I'm terribly sorry for how long this is, there is a summary at the bottom, but I needed to provide context for everything and discuss how things &lt;em&gt;used to work&lt;/em&gt; in order to discuss how things &amp;quot;work&amp;quot; now.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://gist.github.com/naftulikay/3398cce7e25762eb675e50b0ed5de7a6&quot; rel=&quot;nofollow noreferrer&quot;&gt;I have hosted this in a Gist if this is too long for an answer&lt;/a&gt;. You might also be wondering how I know all of this, and all I can say is&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://static1.srcdn.com/wordpress/wp-content/uploads/2020/05/Elmo-Flames-Meme.jpg&quot; alt=&quot;&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have suffered hundreds of hours over the years to achieve this setup, and I'm too far in to question whether it's worth it, but the benefits of full-disk-encryption, BTRFS compression and subvolumes, rEFInd, etc. are worth it for me.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;History &lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;⚠️ NOTE:&lt;/strong&gt; Most of this entire history section is no longer working, but the steps are still relevant for the actual answer at the bottom.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I have a complicated disk setup, not using LVM but using BTRFS for multiple subvolumes (with compression) so that I reduce the amount of read/write on the device and increase the amount of storage space. I won't go into that right now, but it's something I've been doing for a while and ubiquity (the previous, Ubuntu installer), &lt;em&gt;would&lt;/em&gt; actually allow you to do what you're discussing above, elementary OS Odin does not. I'd also usually pass a flag to tell it to not install a bootloader, as I like to use rEFInd, which is much prettier and nicer to work with than grub.&lt;/p&gt;&#xA;&lt;h4&gt;Disk Setup&lt;/h4&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Note that when I use &lt;code&gt;$LUKS_UUID&lt;/code&gt;, I mean the output of &lt;code&gt;blkid -s UUID -o value /dev/nvme0np3)&lt;/code&gt;; when I open the device, I give it a name &lt;code&gt;luks-$LUKS_UUID&lt;/code&gt;, yielding a device path of &lt;code&gt;/dev/mapper/luks-$LUKS_UUID&lt;/code&gt;; when I use &lt;code&gt;$ROOT_UUID&lt;/code&gt;, I mean the internal BTRFS filesystem UUID acquired via &lt;code&gt;blkid -o UUID -s value /dev/mapper/luks-$LUKS_UUID&lt;/code&gt;; I also assume EFI, so &lt;code&gt;$EFI_UUID&lt;/code&gt; is the FAT32 partition's UUID for &lt;code&gt;/dev/nvme0np1&lt;/code&gt;, and I assume that a second partition exists for hosting the initramfs and other boot stuff at &lt;code&gt;/dev/nvme0n1p2&lt;/code&gt; (filesystem choice largely irrelevant but I use BTRFS) and I'll use &lt;code&gt;$BOOT_UUID&lt;/code&gt; to reference its UUID.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The way to get it working before was:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Setup the dm-crypt/LUKS/cryptsetup volume at &lt;code&gt;/dev/nvme0n1p3&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cryptsetup luksFormat --cipher aes-cbc-essiv:sha3-256 --hash sha3-256 \&#xA;    --iter-time 5000 --pbkdf argon2id ... /dev/nvme0n1p3&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unlock the device using:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cryptsetup open /dev/nvme0n1p3 luks-$LUKS_UUID&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create the inner BTRFS filesystem:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mkfs.btrfs -L my-computer-name /dev/mapper/luks-$LUKS_UUID&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount the BTRFS root:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mount /dev/mapper/luks-$(blkid-s UUID -o value) /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create subvolumes:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;btrfs subvolume create /mnt/@           # mount point: /&#xA;btrfs subvolume create /mnt/@home       # mount point: /home&#xA;btrfs subvolume create /mnt/@var        # mount point: /var&#xA;btrfs subvolume create /mnt/@virtualbox # mount point: /virtualbox&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Ignore the VirtualBox mount point, VirtualBox has always had problems with BTRFS, so I symlink the disk image directory to this mount point and mount with &lt;code&gt;nodatacow&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unmount:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;umount /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Run the installer without installing a bootloader.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;The old installer would allow you to do this, it would allow you to use the &lt;code&gt;/dev/mapper/luks-$LUKS_UUID&lt;/code&gt; as &lt;code&gt;/&lt;/code&gt; and Ubuntu used the same subvolume names as listed above so it played fairly nicely.&lt;/p&gt;&#xA;&lt;h4&gt;&lt;code&gt;chroot&lt;/code&gt; and Configure the System&lt;/h4&gt;&#xA;&lt;p&gt;After running the installer, it then became necessary to &lt;code&gt;chroot&lt;/code&gt; into the machine's filesystem, so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# btrfs subvolumes&#xA;mount -o defaults,subvol=@,compress=lzo /dev/mapper/luks-$LUKS_UUID /mnt&#xA;mount -o defaults,subvol=@var,compress=lzo /dev/mapper/luks-$LUKS_UUID /mnt/var&#xA;mount -o defaults,subvol=@home,compress=lzo /dev/mapper/luks-$LUKS_UUID /mnt/home&#xA;mount -o defaults,subvol=@virtualbox,compress=lzo /dev/mapper/luks-$LUKS_UUID /mnt/virtualbox&#xA;# unencrypted boot partition containing initramfs etc.&#xA;mount /dev/nvme0n1p2 /mnt/boot&#xA;# the EFI volume&#xA;mount /dev/nvme0n1p1 /mnt/boot/efi&#xA;# system mount points to ensure chroot works&#xA;mount --bind /dev /mnt/dev&#xA;mount --bind /run /mnt/run&#xA;mount -t proc proc /mnt/proc&#xA;mount -t sysfs sysfs /mnt/sys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Bonus points: since the installer most likely did not mount with compression enabled, now would be a good time to compress the filesystem recursively, as doing it in a live system is probably not a great idea, so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;btrfs filesystem defrag -r -v -clzo&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This compresses the filesystem using LZO, which is a good middle ground compression algorithm, not too CPU expensive, with decent compression overall.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Next: &lt;code&gt;chroot /mnt&lt;/code&gt; and if you did everything correctly, you'll now be living virtually inside of your install, so you'll be able to do customization here.&lt;/p&gt;&#xA;&lt;h4&gt;&lt;code&gt;chroot&lt;/code&gt;&lt;/h4&gt;&#xA;&lt;pre&gt;&lt;code&gt;chroot /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;⚠️ From this point on, you are now &lt;em&gt;inside&lt;/em&gt; your elementary OS install. I'll let you know when to exit it.&lt;/p&gt;&#xA;&lt;h4&gt;Setup &lt;code&gt;/etc/fstab&lt;/code&gt;&lt;/h4&gt;&#xA;&lt;p&gt;The installer never quite got &lt;code&gt;/etc/fstab&lt;/code&gt; right, so install an editor and edit &lt;code&gt;/etc/fstab&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;UUID=$BOOT_UUID /boot btrfs defaults 0 2&#xA;UUID=$EFI_UUID /boot/efi vfat umask=0077 0 1&#xA;&#xA;/dev/mapper/luks-$LUKS_UUID / btrfs defaults,compress=lzo,subvol=@ 0 1&#xA;/dev/mapper/luks-$LUKS_UUID /home btrfs defaults,compress=lzo,subvol=@home 0 2&#xA;/dev/mapper/luks-$LUKS_UUID /var btrfs defaults,compress=lzo,subvol=@var 0 2&#xA;/dev/mapper/luks-$LUKS_UUID /virtualbox btrfs defaults,nodatacow,subvol=@virtualbox 0 2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Be sure to replace those variables with your actual UUIDs.&lt;/p&gt;&#xA;&lt;h4&gt;&lt;code&gt;/etc/crypttab&lt;/code&gt;&lt;/h4&gt;&#xA;&lt;p&gt;I wasn't &lt;em&gt;exactly&lt;/em&gt; sure how &lt;code&gt;/etc/crypttab&lt;/code&gt; worked, it usually didn't seem to do anything at all for me, but I'd always set it up anyway perhaps out of paranoia:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;luks-$LUKS_UUID /dev/nvme0n1p3 none luks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h4&gt;Install rEFInd (optional)&lt;/h4&gt;&#xA;&lt;p&gt;Install the rEFInd PPA if you want a nice graphical boot manager that's easy to customize:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt install -y software-properties-common&#xA;add-apt-repository -y ppa:rodsmith/refind&#xA;apt update&#xA;apt install -y refind&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h4&gt;Ensure Crypto Modules in initramfs&lt;/h4&gt;&#xA;&lt;p&gt;After doing this, the initramfs would usually &lt;em&gt;not&lt;/em&gt; contain the &lt;code&gt;dm-crypt&lt;/code&gt; and &lt;code&gt;cryptsetup&lt;/code&gt; modules, which was super frustrating to debug, but I'd usually go and edit &lt;code&gt;/usr/share/initramfs-tools/hooks/cryptroot&lt;/code&gt; and force the hook to install the &lt;code&gt;cryptsetup&lt;/code&gt; dependencies. The hooks have changed significantly, so this did not seem necessary in my Odin install, but on all of the previous elementary versions, I had to do this; I'd usually add an echo statement to the hook to emit a simple message indicating that it was, in fact, adding the modules to the initramfs.&lt;/p&gt;&#xA;&lt;p&gt;Rebuild the initramfs via &lt;code&gt;update-initramfs -u -k all&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;At this point &lt;strong&gt;your initramfs and your actual machine config should be able to boot.&lt;/strong&gt; However, we're not done, we need to update the kernel command-line to use arguments that were necessary to ensure the kernel knew that it needed to decrypt the root filesystem.&lt;/p&gt;&#xA;&lt;h4&gt;Updating the Kernel Command Line&lt;/h4&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Note: I'm using rEFInd, you're probably using grub, so you'll need to look up the way to edit the grub kernel command line. I've had correspondence with Rod Smith and he's been extremely helpful in the past, can't recommend the bootloader enough, I wish it could be the default bootloader but everybody still uses grub.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;To set the kernel command-line in rEFInd, you'll need to edit &lt;code&gt;/boot/refind_linux.conf&lt;/code&gt;. Each line here represents a different boot option. Specifically, we'll need to set the following:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;root&lt;/code&gt;, which indicates to the kernel where the root filesystem should be found; our root filesystem is inside of a LUKS container, so if you only pass this, the kernel won't be able to find your root.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;rootflags=subvol=@&lt;/code&gt;, which tells the kernel to pass &lt;code&gt;subvol=@&lt;/code&gt; when trying to mount the root filesystem; this makes sure that we're using the correct subvolume at boot time.&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cryptopts=target=luks-$LUKS_UUID,source=UUID=$LUKS_UUID&lt;/code&gt;, which tells the kernel to look for a partition with the &lt;code&gt;$LUKS_UUID&lt;/code&gt; as its identifier, and to open it as &lt;code&gt;luks-$LUKS_UUID&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Remember to replace the variables as you edit &lt;code&gt;/boot/refind_linux.conf&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;quot;Normal&amp;quot;   &amp;quot;ro root=UUID=$ROOT_UUID rootwait rootflags=subvol=@ cryptopts=target=luks-$LUKS_UUID,source=UUID=$LUKS_UUID,options=luks quiet splash vt.handoff=7&amp;quot;&#xA;&amp;quot;Recovery&amp;quot; &amp;quot;ro root=UUID=$ROOT_UUID rootwait rootflags=subvol=@ cryptopts=target=luks-$LUKS_UUID,source=UUID=$LUKS_UUID,options=luks quiet splash&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt; Great! Now we &lt;em&gt;should&lt;/em&gt; be able to boot, provided we got everything right. I often screw things up so I have to enter the installer, setup the &lt;code&gt;chroot&lt;/code&gt;, try to fix things, &lt;code&gt;update-initramfs -u -k all&lt;/code&gt; and iterate. Try booting the recovery option to see more of what the kernel is doing if you don't get boot right away.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;New Sauce ✨&lt;/h2&gt;&#xA;&lt;p&gt;Okay, so, as mentioned at the start, elementary OS Odin does not use &lt;code&gt;ubiquity&lt;/code&gt; anymore, and from what I've seen, you basically cannot tell elementary OS Odin to do full-disk encryption or even user home directory encryption, which was unacceptable to me, at least. I lost about 8-10 hours trying to do the above with the Odin installer, and no dice, but I do have a booting system with full-disk encryption using LUKS.&lt;/p&gt;&#xA;&lt;p&gt;In the end, and I really hate that I had to do this, but I essentially created a &lt;a href=&quot;https://wiki.gentoo.org/wiki/Stage_tarball&quot; rel=&quot;nofollow noreferrer&quot;&gt;stage-3 ala Gentoo&lt;/a&gt; by destroying my LUKS container and having it create an unencrypted filesystem on &lt;code&gt;/dev/nvme0n1p3&lt;/code&gt;. Still within the installer:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;rsync&lt;/code&gt; everything in &lt;code&gt;/dev/nvme0n1p3&lt;/code&gt; to an external disk.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create the LUKS container.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Unlock it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create the BTRFS partition.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount it, create the BTRFS subvolumes, unmount it.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Mount &lt;code&gt;/&lt;/code&gt;, &lt;code&gt;/boot&lt;/code&gt;, &lt;code&gt;/boot/efi&lt;/code&gt;, &lt;code&gt;/var&lt;/code&gt;, &lt;code&gt;/home&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;rsync&lt;/code&gt; from the external disk to where you mounted your root, which so far has been &lt;code&gt;/mnt&lt;/code&gt;, so&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;rsync -av /media/elementary/my-external-disk/elementary-odin-stage-3/ /mnt/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Setup the &lt;code&gt;chroot&lt;/code&gt; with the system mount points, &lt;code&gt;/dev&lt;/code&gt;, &lt;code&gt;/proc&lt;/code&gt;, &lt;code&gt;/sys&lt;/code&gt;, &lt;code&gt;/run&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enter the &lt;code&gt;chroot&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Setup &lt;code&gt;/etc/fstab&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Setup &lt;code&gt;/etc/crypttab&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install rEFInd (optional).&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;code&gt;update-initramfs -u -k all&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Setup kernel command line options.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;&lt;s&gt;Pray&lt;/s&gt; &lt;s&gt;Hope&lt;/s&gt; Reboot and just see what happens.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If you were able to do all of this, you &lt;em&gt;should&lt;/em&gt; be able to get to boot , though I had to boot recovery a few times to fix various issues.&lt;/p&gt;&#xA;&lt;h3&gt;The Broken ❌&lt;/h3&gt;&#xA;&lt;p&gt;Well, Ubuntu has changed the way it does kernel command line arguments for LUKS, and uses a new shiny &lt;code&gt;systemd&lt;/code&gt; configuration in the early initramfs stages to setup your LUKS container. The &lt;code&gt;cryptopts&lt;/code&gt; argument seems outdated, and seems to protest using what I previously used, and so that led me down this rabbit trail:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/focal/man7/kernel-command-line.7.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;man 7 kernel-command-line&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;There are new options starting with &lt;code&gt;luks*&lt;/code&gt; that seem to supersede the old &lt;code&gt;cryptopts&lt;/code&gt; parameter. I haven't gotten these working yet, but the man page does direct us to another interesting place:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/focal/man8/systemd-cryptsetup-generator.8.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;man 8 systemd-cryptsetup-generator&lt;/code&gt;&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;It &lt;em&gt;seems&lt;/em&gt; that what is implied here is that the actual initramfs is configured &lt;em&gt;when it is created/updated&lt;/em&gt; that &lt;code&gt;/etc/crypttab&lt;/code&gt; is finally actually used to embed configuration into the initramfs, so &lt;code&gt;cryptopts&lt;/code&gt; may no longer be necessary, and using the option generates warnings for me at boot time. Maybe it just works, but I am unsure and I haven't tested it out yet, but I likely will do so in VirtualBox to see what is actually necessary.&lt;/p&gt;&#xA;&lt;h3&gt;Debugging &lt;/h3&gt;&#xA;&lt;p&gt;To debug things, boot into recovery mode by omitting &lt;code&gt;quiet splash&lt;/code&gt; from your command line and inserting &lt;code&gt;recovery&lt;/code&gt;. If worse comes to worse, you can also tear apart the initramfs using &lt;code&gt;unmkinitramfs /boot/initrd.img-$(uname -r) ./&lt;/code&gt;, which is what I'm doing right now.&lt;/p&gt;&#xA;&lt;p&gt;My crypttab seems to be in the image, which is promising, but I'll only believe it when I see it actually functioning, I've &lt;em&gt;seen things&lt;/em&gt; so my skepticism is pretty formidable.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;h2&gt;Summary&lt;/h2&gt;&#xA;&lt;p&gt;In short, I documented above what &lt;em&gt;used&lt;/em&gt; to work as a basis for getting things working again in Odin. What I have found so far is that &lt;strong&gt;there is no way in the installer to enable full-disk-encryption&lt;/strong&gt; and I didn't see an option for user home directory encryption either.&lt;/p&gt;&#xA;&lt;p&gt;As a result, I essentially ran the installer, copied all of the installed filesystem files to an external hard drive via &lt;code&gt;rsync&lt;/code&gt;, created my LUKS container and filesystems etc., &lt;code&gt;rsync&lt;/code&gt;ed into the encrypted container, modified some essential files in a &lt;code&gt;chroot&lt;/code&gt;, updated the initramfs, updated the kernel command-line, and I can at least boot now.&lt;/p&gt;&#xA;&lt;p&gt;I'm going to try to do all of this in VirtualBox next to see if I can get a working boot without the kernel command line arguments, hoping that it just works™, but prepared for it to totally not work.&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2021-10-25T19:59:02.350" LastActivityDate="2021-10-25T19:59:02.350" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29045" PostTypeId="1" CreationDate="2021-10-26T09:49:48.973" Score="1" ViewCount="72" Body="&lt;p&gt;How can I automatically add a signature when composing an email?&lt;/p&gt;&#xA;" OwnerUserId="27291" LastActivityDate="2024-01-30T20:03:55.407" Title="How to automatically add a signature?" Tags="|pantheon-mail|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29046" PostTypeId="1" CreationDate="2021-10-26T11:19:00.077" Score="1" ViewCount="380" Body="&lt;p&gt;I just recently increased my RAM, so I wanted to increase the swap size too.  I know Elementary OS is based off Ubuntu, so I've been following Ubuntu information since there isn't much documentation for this stuff for Elementary OS specifically.  I have 8GBs of ram now, and from what I understand, Ubuntu recommends that you allocate 11GBs of ram if you're planning on using hibernation, or 3GBs if you're not using hibernation.  Is this true for Elementary OS too?&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/swap-size/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/swap-size/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Anyways, I was following the following guide to increase the swap size:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://linuxhandbook.com/increase-swap-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linuxhandbook.com/increase-swap-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;But when I got to the part where we use the follocate command to increase the swap file size, I get the following error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;fallocate: fallocate failed: Invalid argument&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I figured I'd allocate 11GBs of space just to be safe, so I was using the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo fallocate -l 11G /dev/dm-2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any ideas as to what I'm doing wrong here?  Is 11GBs a good size for the swap for Elementary OS with 8GBs of RAM?  Am I getting GiB mixed up with GB in the follocate command?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="27114" LastActivityDate="2021-10-26T14:15:03.507" Title="How do I Increase the Swap Size?" Tags="|swap|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29047" PostTypeId="1" AcceptedAnswerId="29075" CreationDate="2021-10-26T12:19:49.563" Score="0" ViewCount="76" Body="&lt;p&gt;Elementary OS 6 Odin&#xA;Thunderbird 91.2.1 (64-bit) flatpak - 1.0&lt;/p&gt;&#xA;&lt;p&gt;All is working fine apart from Local folders occasionally not connecting (they are located on NAS, which connects at boot perfectly fine)&#xA;It is a simple matter of editing the settings every time it happens (Thunderbird re-starts and all is fine)but...&lt;/p&gt;&#xA;&lt;p&gt;it was all (and still is) working fine in EOS 5 , so why is it not working in EOS 6 ??&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-28T15:20:49.217" Title="Thunderbird local folder" Tags="|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29048" PostTypeId="2" ParentId="29046" CreationDate="2021-10-26T14:15:03.507" Score="1" Body="&lt;p&gt;Generally a swap file would not be written in &lt;code&gt;/dev&lt;/code&gt;, which contains device APIs, but in the root (&lt;code&gt;/&lt;/code&gt;) directory. So long as you don’t mind having a file there, you can do something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo fallocate -l 12G /swapfile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; The &lt;code&gt;12G&lt;/code&gt; size is different from what you specified not because 11GB is “wrong”, but because I generally leave 4GB of swap for buffers on machines that need to hibernate. Feel free to set any value you are comfortable with.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;From here it would be a good idea to verify the file exists and is the right size with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ls -lh /swapfile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should see a single file of the same size you specified in the &lt;code&gt;fallocate&lt;/code&gt; command.&lt;/p&gt;&#xA;&lt;p&gt;The next step is to &lt;em&gt;enable&lt;/em&gt; the swap file. This is done by setting the permissions:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chmod 600 /swapfile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then marking the file as being for swapping purposes:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mkswap /swapfile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If everything goes properly, you’ll see something like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Setting up swapspace version 1, size = 12288 MiB (12884901888 bytes)&#xA;no label, UUID=6ecf2854-2ab9-4437-1ee0-577e740897ff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now you can tell the system to use that space:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo swapon /swapfile&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can verify Elementary OS is using the swap file with the &lt;code&gt;swapon&lt;/code&gt; command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo swapon --show&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You should see something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;NAME      TYPE   SIZE USED PRIO&#xA;/swapfile file 12288M   0B   -2&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Finally, to make your swap file operational at boot time, you need to edit your &lt;code&gt;fstab&lt;/code&gt; (File System Table) file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/fstab&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use any text editor you are familiar with. It does not need to be &lt;code&gt;vi&lt;/code&gt;.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;Add this to the end of the file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/swapfile     none     swap    sw   0   0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;While this &lt;em&gt;looks like&lt;/em&gt; a lot of steps, it’s not too bad when you step through the process to see what’s going on &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-10-26T14:15:03.507" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29050" PostTypeId="1" CreationDate="2021-10-26T19:57:05.880" Score="0" ViewCount="78" Body="&lt;p&gt;iMac Retina 5K 27&amp;quot; 2017 model with Big Sur OS and external drives available.&lt;/p&gt;&#xA;&lt;p&gt;I have downloaded/ verified the ISO&#xA;I have used Etcher to create an installer USB and a CD.&lt;/p&gt;&#xA;&lt;p&gt;Both boot up using the option boot to select process&#xA;NIETHER gets me the Try-or-Install splash screen&#xA;--- just a fleeting blue icon followed by scrolling script.&lt;/p&gt;&#xA;&lt;p&gt;(side note, same behavior with Ubuntu ISO)&lt;/p&gt;&#xA;&lt;p&gt;I'd really like to try out a Linux OS!&lt;/p&gt;&#xA;&lt;p&gt;Screen pictures&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5xWoX.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5xWoX.jpg&quot; alt=&quot;2 pix to show boot &quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27296" LastEditorUserId="27296" LastEditDate="2021-10-27T22:08:33.600" LastActivityDate="2021-10-27T22:08:33.600" Title="How do I get that Splash Screen for installing?" Tags="|system-installation|display|install|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29052" PostTypeId="2" ParentId="28575" CreationDate="2021-10-27T05:35:29.467" Score="0" Body="&lt;p&gt;Just like &lt;strong&gt;pigonthewing&lt;/strong&gt; said earlier, you need to edit the code and rebuild the app&lt;/p&gt;&#xA;&lt;p&gt;I forked the code and i'll edit this line on every update&lt;/p&gt;&#xA;&lt;p&gt;You can get it here: &lt;a href=&quot;https://github.com/ForumPlayer/pantheon-terminal&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/ForumPlayer/pantheon-terminal&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27300" LastActivityDate="2021-10-27T05:35:29.467" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29053" PostTypeId="1" AcceptedAnswerId="29059" CreationDate="2021-10-27T06:18:45.530" Score="2" ViewCount="95" Body="&lt;p&gt;This morning my &lt;code&gt;apt dist-upgrade&lt;/code&gt; routine resulted in one new package - &lt;code&gt;io.elementary.portals&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Furthermore, this new upgrade made &lt;code&gt;io.elementary.contractor.file-roller&lt;/code&gt; package &amp;quot;no longer required&amp;quot;. Needless to say that that's not true. Removing this package left me with Files having no right-click menu with archiving options so I had to reinstall it.&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know what is happening?&lt;/p&gt;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastEditorDisplayName="user26849" LastEditDate="2021-10-27T06:58:01.753" LastActivityDate="2021-10-27T15:32:21.357" Title="Latest upgrade made io.elementary.contractor.file-roller package &quot;no longer required&quot;" Tags="|pantheon-files|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29054" PostTypeId="1" CreationDate="2021-10-27T07:25:03.103" Score="0" ViewCount="51" Body="&lt;p&gt;After installation the elementary OS did not boot.&#xA;I can't be sure what is wrong.&#xA;If I installed any other type of linux like LinuxMint or Fedora they seem&#xA;to support multiboot and are booting well.&lt;/p&gt;&#xA;&lt;p&gt;It looks I might need check the installation media integrity also:&#xA;[![boot_error][1]][1]&#xA;[1]: https://i.stack.imgur.com/Pnn5Y.png&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled the ISO-image to the USB-stick and reinstall, but same issue remains that nothing appears in the boot in regards of the elementary OS.&#xA;I guess the FedoraLinux boot sector is 'deeper' there and it can not add the boot/grub configuration for the ElementaryOS.&#xA;Problem is the 'boot loader'. I can not see elementary OS in the boot loader selection menu, also I could not see the elementary OS in the BIOS boot selection.&#xA;I tried to make the installation on the existing Fedora linux partition, but it seems it can not delete maybe the Fedora linux boot files or something like that.&lt;/p&gt;&#xA;" OwnerUserId="27301" LastEditorUserId="27301" LastEditDate="2021-10-29T08:17:13.573" LastActivityDate="2021-10-29T08:17:13.573" Title="Elementary OS does not boot" Tags="|boot|dual-boot|grub|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29056" PostTypeId="1" CreationDate="2021-10-27T14:16:19.427" Score="0" ViewCount="76" Body="&lt;p&gt;Edit 2:&lt;/p&gt;&#xA;&lt;p&gt;The issue is not solved because the delay happens after the boot. Boot is very fast and has always been; the issue starts when I log in with my password and only after that the system shows a blank screen with only mouse pointer visible. It delays 30 seconds to show the desktop and it wasn’t even my fault because I thought I screwed up the system and I installed eOS from scratch and guess what, it is still happening. Pretty annoying situation but on a second thought I guess the latest update is responsible for this. Before that, everything was perfect.&lt;/p&gt;&#xA;&lt;p&gt;Original post:&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;I tried to install Vocal Podcast Player .deb file (older Elementary package), but it refused to be installed and shown as broken package. So naturally I purged the broken packages and tried to fix it with &lt;code&gt;sudo apt update --fix-missing&lt;/code&gt;, and it actually did fix the packages I guess, however when I sign in, the desktop now shows up with 30 seconds delay. Every single time this happens. I don't know what is broken but I need a guide.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Edit 1: As per suggestion, I did an analyze. Now what am I supposed to do?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ systemd-analyze critical-chain&#xA;The time when unit became active or started is printed after the &amp;quot;@&amp;quot; character.&#xA;The time the unit took to start is printed after the &amp;quot;+&amp;quot; character.&#xA;&#xA;graphical.target @26.110s&#xA;└─multi-user.target @26.109s&#xA;  └─kerneloops.service @26.092s +15ms&#xA;    └─network-online.target @26.087s&#xA;      └─NetworkManager-wait-online.service @1.737s +24.349s&#xA;        └─NetworkManager.service @1.476s +259ms&#xA;          └─dbus.service @1.467s&#xA;            └─basic.target @1.439s&#xA;              └─sockets.target @1.438s&#xA;                └─uuidd.socket @1.438s&#xA;                  └─sysinit.target @1.432s&#xA;                    └─swap.target @1.432s&#xA;                      └─dev-mapper-cryptswap.swap @1.409s +21ms&#xA;                        └─dev-mapper-cryptswap.device @1.408s&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27306" LastEditorUserId="27313" LastEditDate="2021-12-12T09:11:20.773" LastActivityDate="2021-12-12T09:11:20.773" Title="GUI delay after signing in - eOS 6" Tags="|release-odin|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="29057" PostTypeId="2" ParentId="28736" CreationDate="2021-10-27T14:22:22.450" Score="0" Body="&lt;p&gt;I had a quick look in the About plug issues:&#xA;&lt;a href=&quot;https://github.com/elementary/switchboard-plug-about/issues/219&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/switchboard-plug-about/issues/219&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;This page is now called &amp;quot;System&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2021-10-27T14:22:22.450" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29059" PostTypeId="2" ParentId="29053" CreationDate="2021-10-27T15:32:21.357" Score="0" Body="&lt;p&gt;I believe this is related to elementary moving to Flatpak apps - these will not work with the existing contractor infra-structure because of sandboxing and an alternative solution is being worked on.  However, it seems premature to say contracts are redundant since some apps - in particular Files - are unlikely to ever be Flatpak'd and at the moment continue to work with contracts.  The intention is to have Files use the new methodology as it evolves - we are currently working on a &amp;quot;Send as Email&amp;quot; portal that Files will use.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-10-27T15:32:21.357" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29061" PostTypeId="2" ParentId="29027" CreationDate="2021-10-27T16:32:31.890" Score="0" Body="&lt;p&gt;This is a consequence of Flatpak packaging and sandboxing, I think.  You do not say which apps you find are affected but I suspect they are Flatpak'd or using the FileChooser portal rather than directly.  It may depend on what filesystem permissions they request and are granted.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-10-27T16:32:31.890" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29063" PostTypeId="1" CreationDate="2021-10-28T00:38:13.553" Score="0" ViewCount="37" Body="&lt;p&gt;I wonder if someone can help me to get the WIFI to work while no having Internet connection?  Is there a way to install the missing drivers from the Live/Flash USB from which I installed the OS?  (I'm running a 2009 MacBook Retina.)  Thanks.&lt;/p&gt;&#xA;" OwnerUserId="27310" LastActivityDate="2021-10-28T00:38:13.553" Title="Get WIFI to work without internet connection?" Tags="|wifi|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29068" PostTypeId="2" ParentId="29027" CreationDate="2021-10-28T07:57:49.670" Score="0" Body="&lt;p&gt;I have un-installed Flatpak version of Firefox and installed download directly from Firefox.&lt;/p&gt;&#xA;&lt;p&gt;One problem solved, but:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;how do you &amp;quot;integrate&amp;quot; my downloaded directly version with&#xA;elementary OS ???&lt;/p&gt;&#xA;&lt;p&gt;later edit:&lt;/p&gt;&#xA;&lt;p&gt;I have used &lt;code&gt;sudo apt install firefox&lt;/code&gt; instead of downloading directly from Firefox and all is well!&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;how does one bring the issue with Flatpak to the attention of EOS developers? I would prefer to use Flatpak but not at the expense of lost functionality...&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2021-10-28T08:26:26.040" LastActivityDate="2021-10-28T08:26:26.040" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29069" PostTypeId="1" CreationDate="2021-10-28T08:23:28.967" Score="0" ViewCount="42" Body="&lt;p&gt;after the update of yesterday 27th october odin has become very slow both at startup and in the use of applications.&#xA;Does anyone have the same problems as me?&#xA;I have an Intel® Core™ i3-5005U CPU @ 2.00GHz Dual-Core Intel® HD Graphics 5500 (Broadwell GT2)&lt;br /&gt;&#xA;Memory: 3.3 GiB&#xA;Disk: 112.8 GB.&lt;/p&gt;&#xA;" OwnerUserId="27053" LastActivityDate="2021-10-28T14:28:59.713" Title="odin , slowdowns after upgrade" Tags="|odin|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29072" PostTypeId="2" ParentId="28500" CreationDate="2021-10-28T13:52:06.113" Score="1" Body="&lt;p&gt;This is just and only update, just change link with newer version:&lt;/p&gt;&#xA;&lt;p&gt;2º Download:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wget -c https://github.com/Lafydev/wingpanel-indicator-ayatana/raw/master/com.github.lafydev.wingpanel-indicator-ayatana_2.0.8_odin.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27321" LastEditorUserId="25612" LastEditDate="2022-03-20T21:41:39.303" LastActivityDate="2022-03-20T21:41:39.303" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29073" PostTypeId="1" CreationDate="2021-10-28T14:11:08.560" Score="1" ViewCount="344" Body="&lt;p&gt;If you get this error with hp-setup?!&lt;/p&gt;&#xA;&lt;p&gt;warning: elementary distro is not found in AUTH_TYPES&lt;/p&gt;&#xA;" OwnerUserId="27321" LastEditorUserId="27321" LastEditDate="2021-10-31T09:41:22.287" LastActivityDate="2024-03-19T15:04:25.483" Title="How to install HP printer on Elementary OS 6 Odin (HP LaserJet 1102W)" Tags="|printer|hp|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29075" PostTypeId="2" ParentId="29047" CreationDate="2021-10-28T15:20:49.217" Score="0" Body="&lt;p&gt;It seems that the issue is caused by Flatpak.&lt;/p&gt;&#xA;&lt;p&gt;un-installing Flatpak version and replacing it with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install Thunderbird&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;solves the problem.&lt;/p&gt;&#xA;&lt;p&gt;It appears to be common problem for Mozilla apps, see also:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29027/create-new-folder-while-saving-the-file-not-before&quot;&gt;another Odin/Mozilla Flatpak issue&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-10-28T15:20:49.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29077" PostTypeId="1" CreationDate="2021-10-29T15:58:14.337" Score="0" ViewCount="26" Body="&lt;p&gt;Anyone have any ideas how to fix it?&lt;/p&gt;&#xA;&lt;p&gt;FYI:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;on new account it works&lt;/li&gt;&#xA;&lt;li&gt;tried uninstall/install, didn't help&lt;/li&gt;&#xA;&lt;li&gt;I don't have any clue at which moment it stopped working, since I don't use it often&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;arnis@kerrigan:~$ io.elementary.shortcut-overlay&#xA;&#xA;** (io.elementary.shortcut-overlay:18707): CRITICAL **: 18:50:03.480: gee_abstract_collection_get_size: assertion 'self != NULL' failed&#xA;&#xA;** (io.elementary.shortcut-overlay:18707): CRITICAL **: 18:50:03.481: gee_abstract_collection_add: assertion 'self != NULL' failed&#xA;&#xA;(io.elementary.shortcut-overlay:18707): GLib-CRITICAL **: 18:50:03.482: g_strsplit: assertion 'string != NULL' failed&#xA;Segmentation fault&#xA;arnis@kerrigan:~$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;journalctl log:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;okt 29 18:33:54 kerrigan kernel: io.elementary.s[17466]: segfault at 0 ip 000055e8af2e0f73 sp 00007ffd67d69a20 error 4 in io.elementary.shortcut-overlay[55e8af2df000+4000]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2024-03-19T02:06:20.733" Title="Keyboard shortcut app crashes with segmentation fault [io.elementary.shortcut-overlay]" Tags="|keyboard-shortcuts|crash|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29079" PostTypeId="1" CreationDate="2021-10-30T07:10:49.010" Score="1" ViewCount="42" Body="&lt;p&gt;AppCenter is working regularly with all other updates except 4:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;4 components with updates:&#xA; • shim boot loader to chain-load signed boot loaders under Secure Boot Version: 15.4-0ubuntu9&#xA;• grub-common GRand Unified Bootloader (common files) Version: 2.02-2ubuntu8.23+elementary27ubuntu5.1.7.1&#xA;• grub-pc-bin GRand Unified Bootloader, version 2 (PC/BIOS binaries) Version: 2.02-2ubuntu8.23+elementary27ubuntu5.1.7.1&#xA;• grub2-common GRand Unified Bootloader (common files for version 2) Version: 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;On prompting the update button an empty cursor appears briefly indicating “loading cache” and then suddenly disappears with no effects.&lt;/p&gt;&#xA;&lt;p&gt;Tried &lt;code&gt;sudo apt update&lt;/code&gt;, &lt;code&gt;sudo apt-get update&lt;/code&gt;, and &lt;code&gt;sudo apt upgrade&lt;/code&gt;. The last command resulted in:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have been kept back:&#xA;grub-common grub-efi-amd64-bin grub-efi-amd64-signed grub-pc grub-pc-bin&#xA;grub2-common shim shim-signed&#xA;0 upgraded, 0 newly installed, 0 to remove and 8 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am running:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS 5.1.7 Hera (Built on Ubuntu 18.04.6 LTS)&lt;/li&gt;&#xA;&lt;li&gt;Linux 5.4.0-89-generic&lt;/li&gt;&#xA;&lt;li&gt;GTK 3.22.30&lt;/li&gt;&#xA;&lt;li&gt;MacBook A1181&lt;/li&gt;&#xA;&lt;li&gt;Dual-Core Intel® Core™2 Duo CPU T8300 @ 2.40GHz&lt;/li&gt;&#xA;&lt;li&gt;Intel Corporation Mobile GM965/GL960 Integrated Graphics&lt;/li&gt;&#xA;&lt;li&gt;2,0 GB memory&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;After trying to install the single packages one by one via Terminal it would appear that this involves the removal (temporary?) of an essential package (shim/shim-signed), and I suppose the system refuses to do so. Apparently a bug (?)&lt;/p&gt;&#xA;" OwnerUserId="27331" LastEditorUserId="27331" LastEditDate="2021-11-03T12:55:38.823" LastActivityDate="2021-11-03T12:55:38.823" Title="AppCenter is working regularly with all other updates except 4:" Tags="|updates|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29081" PostTypeId="2" ParentId="29077" CreationDate="2021-10-30T19:28:39.370" Score="0" Body="&lt;p&gt;This happens if shortcut key is removed.&lt;/p&gt;&#xA;&lt;p&gt;Apparently it's a bug that have been fixed in &lt;a href=&quot;https://github.com/elementary/shortcut-overlay/releases/tag/1.2.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;version 1.2.1&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2021-10-30T19:28:39.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29082" PostTypeId="1" CreationDate="2021-10-31T01:17:15.227" Score="0" ViewCount="191" Body="&lt;p&gt;Is it possible to force vs code someway to use dark mode on its title bar, alerts, etc?&lt;/p&gt;&#xA;&lt;p&gt;I installed it as a snap.&lt;/p&gt;&#xA;&lt;p&gt;(I've read about wanting devs to opt-in to the new dark theme implementation, but maybe there is a way to do it in the meantime?)&lt;/p&gt;&#xA;" OwnerUserId="27336" LastActivityDate="2024-01-01T21:08:46.123" Title="Set Visual Studio Code to use Dark Theme" Tags="|themes|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29083" PostTypeId="2" ParentId="29082" CreationDate="2021-10-31T01:42:29.873" Score="0" Body="&lt;p&gt;Try adding the custom style to your &lt;code&gt;~/.config/Code/User/settings.json&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;quot;window.titleBarStyle&amp;quot;: &amp;quot;custom&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27314" LastEditorUserId="25612" LastEditDate="2021-12-12T09:11:57.180" LastActivityDate="2021-12-12T09:11:57.180" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29084" PostTypeId="2" ParentId="29073" CreationDate="2021-10-31T09:40:52.023" Score="0" Body="&lt;p&gt;#1. Install &amp;quot;sudo apt install hplip&amp;quot; (also you can install also hplip-gui to get gui for installation, not just terminal) i do preffer just terminal install&lt;/p&gt;&#xA;&lt;p&gt;#2. download latest .run and .asc files (I have installed: hplip-3.20.3-plugin.run, hplip-3.20.3-plugin.run.asc) from &lt;a href=&quot;https://developers.hp.com/hp-linux-imaging-and-printing/plugins&quot; rel=&quot;nofollow noreferrer&quot;&gt;here &amp;gt;&amp;gt; HP developers site&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;#3. start from terminal sudo hp-setup -i, select 0 for usb, 1 for network&lt;/p&gt;&#xA;&lt;p&gt;instead of D as download (you will get error), use P as path and enter your download directory of two previous files .acs and run, example: /home/your_username/Download&lt;/p&gt;&#xA;&lt;p&gt;That's all, you can now print with HP, also you can find hplip toolbox manager in ElemetaryOS menu.&lt;/p&gt;&#xA;" OwnerUserId="27321" LastActivityDate="2021-10-31T09:40:52.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29085" PostTypeId="2" ParentId="38" CreationDate="2021-10-31T10:17:51.503" Score="1" Body="&lt;p&gt;&lt;strong&gt;Elementary 6.0 (Odin)&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Double click mode is no longer supported in Files - the two previous modes have replaced by a single mixed mode where single clicking on a folder navigates and single clicking on a file selects it.   Double clicking on a file opens it.   There are several other ways of selecting a folder if required.  Further discussions arising from this change can be found at &lt;a href=&quot;https://github.com/elementary/files/discussions/1729&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/files/discussions/1729&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-10-31T10:17:51.503" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29087" PostTypeId="2" ParentId="21123" CreationDate="2021-10-31T17:58:09.980" Score="0" Body="&lt;p&gt;yes indeed, black screen with blinking is still present.&lt;/p&gt;&#xA;&lt;p&gt;my solution is press ctrl+alt+F1 and write&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl restart display-manager&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;or&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo reboot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27341" LastActivityDate="2021-10-31T17:58:09.980" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29088" PostTypeId="1" AcceptedAnswerId="29097" CreationDate="2021-10-31T20:39:16.250" Score="0" ViewCount="52" Body="&lt;p&gt;My displays seems to be rendering at 1080p (settings page confirms this), but my display is 4k, but that isn't an option in the displays settings, page the highest it goes is 1080p for some reason. I found a similar questions suggestions to install mesa-utils, did that and restarted but the right options still aren't there. See attached screenshot. Any help is appreciated!&lt;/p&gt;&#xA;&lt;p&gt;Edit: Added &lt;code&gt;sudo lshw -c video&lt;/code&gt; output below:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;emily@EmilysElementaryOSLinuxBox:~$ sudo lshw -c video&#xA;  *-display                 &#xA;       description: VGA compatible controller&#xA;       product: Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller&#xA;       vendor: Intel Corporation&#xA;       physical id: 2&#xA;       bus info: pci@0000:00:02.0&#xA;       version: 06&#xA;       width: 64 bits&#xA;       clock: 33MHz&#xA;       capabilities: msi pm vga_controller bus_master cap_list rom&#xA;       configuration: driver=i915 latency=0&#xA;       resources: irq:27 memory:f7800000-f7bfffff memory:e0000000-efffffff ioport:f000(size=64) memory:c0000-dffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rXz5U.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rXz5U.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27342" LastEditorUserId="27342" LastEditDate="2021-11-01T13:34:57.513" LastActivityDate="2021-11-03T21:57:43.077" Title="Display resolution is wrong and the displays settings page doesn't offer the right resolution options" Tags="|display|resolution|odin|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29090" PostTypeId="1" CreationDate="2021-11-01T22:14:07.250" Score="1" ViewCount="137" Body="&lt;p&gt;I'm really enjoying ElementaryOS Odin so far; my only major complaint is that &lt;code&gt;lightdm&lt;/code&gt; is quite unstable on boot.&lt;/p&gt;&#xA;&lt;p&gt;Specifically on probably 75% of hard boots I do, it either fails to initialise or crashes shortly after initialisation. I'm usually either presented with my motherboard's logo, or else I see a brief flash of Greeter followed by a crash to black or the board logo screen again.&lt;/p&gt;&#xA;&lt;p&gt;TTY can be enabled from this screen with CTRL+ALT+F2 as usual, and usually some combination of repeating &lt;code&gt;sudo service lightdm restart&lt;/code&gt; and &lt;code&gt;sudo reboot now&lt;/code&gt; will eventually land me on Greeter in a stable state, but it's inconsistent and just stresses me out.&lt;/p&gt;&#xA;&lt;p&gt;Is there anything I can tweak or investigate to try to achieve better stability? I usually keep my graphics drivers up-to-date and updating them hasn't fixed this in the past so I doubt it's related.&lt;/p&gt;&#xA;" OwnerUserId="27164" LastActivityDate="2021-11-01T22:14:07.250" Title="How to make lightdm more stable on boot?" Tags="|boot|greeter|release-odin|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="29092" PostTypeId="1" AcceptedAnswerId="29093" CreationDate="2021-11-02T01:03:09.290" Score="1" ViewCount="414" Body="&lt;p&gt;I continuously get the following error when updating every app and OS Update, either updating all or separately:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Failed to update 'AppCenter'&#xA;This may have been caused by external or manually compiled software.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Details:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Error while installing package: installed linux-firmware package post-installation script subprocess returned error exit status 1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The output of &lt;code&gt;df -h&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Filesystem             Size  Used Avail Use% Mounted on&#xA;udev                   3.8G     0  3.8G   0% /dev&#xA;tmpfs                  785M  2.0M  783M   1% /run&#xA;/dev/mapper/data-root  453G   90G  341G  21% /&#xA;tmpfs                  3.9G   67M  3.8G   2% /dev/shm&#xA;tmpfs                  5.0M  4.0K  5.0M   1% /run/lock&#xA;tmpfs                  3.9G     0  3.9G   0% /sys/fs/cgroup&#xA;/dev/loop1              56M   56M     0 100% /snap/core18/2128&#xA;/dev/loop2              62M   62M     0 100% /snap/core20/1081&#xA;/dev/loop3             219M  219M     0 100% /snap/gnome-3-34-1804/72&#xA;/dev/loop5             128K  128K     0 100% /snap/bare/5&#xA;/dev/loop4              62M   62M     0 100% /snap/core20/1169&#xA;/dev/loop0              56M   56M     0 100% /snap/core18/2246&#xA;/dev/loop6             106M  106M     0 100% /snap/mailspring/506&#xA;/dev/loop7              33M   33M     0 100% /snap/snapd/13270&#xA;/dev/loop8              33M   33M     0 100% /snap/snapd/13640&#xA;/dev/loop9              66M   66M     0 100% /snap/gtk-common-themes/1519&#xA;/dev/sda2              457M  432M     0 100% /boot&#xA;/dev/sda1              263M   11M  252M   5% /boot/efi&#xA;tmpfs                  785M  184K  784M   1% /run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Running autoremove did not fix the problem.&lt;/p&gt;&#xA;&lt;p&gt;The output of &lt;code&gt;sudo apt autoremove&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;The following packages will be REMOVED:&#xA;  libclutter-gst-3.0-0&#xA;0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded.&#xA;3 not fully installed or removed.&#xA;After this operation, 193 kB disk space will be freed.&#xA;Do you want to continue? [Y/n] y&#xA;(Reading database ... 190571 files and directories currently installed.)&#xA;Removing libclutter-gst-3.0-0:amd64 (3.0.27-1) ...&#xA;Setting up linux-firmware (1.187.19) ...&#xA;update-initramfs: Generating /boot/initrd.img-5.11.0-37-generic&#xA;W: Possible missing firmware /lib/firmware/i915/skl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/glk_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/cml_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/dg1_dmc_ver2_02.bin for module i915&#xA;I: The initramfs will attempt to resume from /dev/dm-2&#xA;I: (/dev/mapper/data-swap)&#xA;I: Set the RESUME variable to override this.&#xA;Error 24 : Write error : cannot write compressed block &#xA;E: mkinitramfs failure cpio 141 lz4 -9 -l 24&#xA;update-initramfs: failed for /boot/initrd.img-5.11.0-37-generic with 1.&#xA;dpkg: error processing package linux-firmware (--configure):&#xA; installed linux-firmware package post-installation script subprocess returned error exit status 1&#xA;Setting up linux-image-5.11.0-38-generic (5.11.0-38.42~20.04.1) ...&#xA;dpkg: dependency problems prevent configuration of linux-image-generic-hwe-20.04:&#xA; linux-image-generic-hwe-20.04 depends on linux-firmware; however:&#xA;  Package linux-firmware is not configured yet.&#xA;&#xA;dpkg: error processing package linux-image-generic-hwe-20.04 (--configure):&#xA; dependency problems - leaving unconfigured&#xA;Processing triggers for libc-bin (2.31-0ubuntu9.2) ...&#xA;Processing triggers for linux-image-5.11.0-38-generic (5.11.0-38.42~20.04.1) ...&#xA;/etc/kernel/postinst.d/initramfs-tools:&#xA;update-initramfs: Generating /boot/initrd.img-5.11.0-38-generic&#xA;W: Possible missing firmware /lib/firmware/i915/skl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/bxt_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/glk_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/kbl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/cml_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/icl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/ehl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_huc_7.5.0.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/tgl_guc_49.0.1.bin for module i915&#xA;W: Possible missing firmware /lib/firmware/i915/dg1_dmc_ver2_02.bin for module i915&#xA;I: The initramfs will attempt to resume from /dev/dm-2&#xA;I: (/dev/mapper/data-swap)&#xA;I: Set the RESUME variable to override this.&#xA;Error 24 : Write error : cannot write compressed block &#xA;E: mkinitramfs failure cpio 141 lz4 -9 -l 24&#xA;update-initramfs: failed for /boot/initrd.img-5.11.0-38-generic with 1.&#xA;run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1&#xA;dpkg: error processing package linux-image-5.11.0-38-generic (--configure):&#xA; installed linux-image-5.11.0-38-generic package post-installation script subprocess returned error exit status 1&#xA;Errors were encountered while processing:&#xA; linux-firmware&#xA; linux-image-generic-hwe-20.04&#xA; linux-image-5.11.0-38-generic&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Machine Details:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;eOS 6 20.04.3&lt;/li&gt;&#xA;&lt;li&gt;Linux 5.11.0-37-generic&lt;/li&gt;&#xA;&lt;li&gt;Dual-Core Intel® Core™ i5-6200U&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerDisplayName="user26657" LastEditorDisplayName="user26657" LastEditDate="2021-11-02T22:40:20.170" LastActivityDate="2021-11-05T03:54:40.020" Title="AppCenter is Failing to Install Any Updates" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29093" PostTypeId="2" ParentId="29092" CreationDate="2021-11-02T15:05:50.740" Score="0" Body="&lt;p&gt;The problem is reported there in your &lt;code&gt;df&lt;/code&gt; output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&#xA;Filesystem             Size  Used Avail Use% Mounted on&#xA;…&#xA;/dev/sda2              457M  432M     0 100% /boot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If your &lt;code&gt;/boot&lt;/code&gt; file system is full, updates will often fail. Fortunately, the fix is usually not too difficult.&lt;/p&gt;&#xA;&lt;p&gt;Try this:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it’s not already open)&lt;/li&gt;&#xA;&lt;li&gt;Remove the older, unused kernels from previous updates:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Use &lt;code&gt;autoclean&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt autoclean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Verify that all installed packages are in a “clean” state:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt clean&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Check the available space on &lt;code&gt;/boot&lt;/code&gt;&#xA;&lt;pre&gt;&lt;code&gt;df -h /boot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Hopefully the number is much lower.&lt;/li&gt;&#xA;&lt;li&gt;Run your updates:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If for any reason this does not do the job, you will need to manually remove old kernel packages first, &lt;em&gt;then&lt;/em&gt; perform the steps above.&lt;/p&gt;&#xA;&lt;h3&gt;Manually Removing Older Kernels&lt;/h3&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;From Terminal, determine your current kernel version:&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;Remember the number.&lt;/li&gt;&#xA;&lt;li&gt;List all installed kernels:&#xA;&lt;pre&gt;&lt;code&gt;dpkg --list 'linux-image*' | grep ^ii&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Delete one or two of the older kernels:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove linux-image-{version}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Be sure to replace &lt;code&gt;{version}&lt;/code&gt; with the version number you want to remove.&lt;/sup&gt;&lt;br&gt;&lt;/li&gt;&#xA;&lt;li&gt;Try the steps in the first part of the answer again.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2021-11-05T03:54:40.020" LastActivityDate="2021-11-05T03:54:40.020" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29095" PostTypeId="1" CreationDate="2021-11-03T19:52:58.390" Score="0" ViewCount="50" Body="&lt;p&gt;I have quite an unusual problem with the suspend function on my Odin PC with AMD Ryzen 7 4800u (Lenovo IdeaCentre 3 All-in-One 24&amp;quot;).&lt;/p&gt;&#xA;&lt;p&gt;If I leave it to go to suspend after the amount of time set in Switchboard, everything works as it should.&lt;/p&gt;&#xA;&lt;p&gt;If I want to manually suspend my PC from the Power menu, the following happens:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;cca 40% of the time everything works as it should&lt;/li&gt;&#xA;&lt;li&gt;cca 30% of the time the screen goes off but the PC is still running and I can bring it back to the login screen pressing several times the ESC key&lt;/li&gt;&#xA;&lt;li&gt;cca 30% of the time the screen goes off, the PC is still running but everything is frozen and I can only turn it off with the computer's power button.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Apart from this issue, I'm very happy with the Ryzen 7 performance and everything just works out of the box.&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-11-03T19:52:58.390" Title="Suspend issues on AMD Ryzen 7 4800u with radeon graphics" Tags="|suspend|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29097" PostTypeId="2" ParentId="29088" CreationDate="2021-11-03T21:57:43.077" Score="0" Body="&lt;p&gt;Happy to report that getting a dedicated display port to display port cable and hooking directly up from the mini PC to the monitor resolved this issue and it was immediately recognized as 4K. So seems something with that display port to HDMI adapter wasn't allowing the OS or display driver or something to recognized the true resolution.&lt;/p&gt;&#xA;&lt;p&gt;So TLDR = yeah just avoid display connection adapters and hopefully you won't also have this issue. :)&lt;/p&gt;&#xA;" OwnerUserId="27342" LastActivityDate="2021-11-03T21:57:43.077" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29099" PostTypeId="1" CreationDate="2021-11-05T06:00:22.637" Score="1" ViewCount="374" Body="&lt;p&gt;The issue has occurred after the accepted solution to &lt;a href=&quot;https://unix.stackexchange.com/questions/675425/regular-update-broke-initramfs-on-elementary-os-6/675476#675476&quot;&gt;https://unix.stackexchange.com/questions/675425/regular-update-broke-initramfs-on-elementary-os-6/675476#675476&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is how my screen looks when I power on my laptop&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mz6OV.jpg&quot; rel=&quot;nofollow noreferrer&quot; title=&quot;Error on booting&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mz6OV.jpg&quot; alt=&quot;Error on booting&quot; title=&quot;Error on booting&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The prompt is as follows:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;BusyBox v1.30.1 (Ubuntu 1:1.30.1-4ubuntu6.3) built-in shell (ash)&#xA;Enter 'help' for a list of built-in commands.&#xA;&#xA;(initramfs)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Edit:&#xA;How do I try the fsck command? Can you elaborate?&#xA;Before turning off my computer I updated intramfs of all the kernels. So none of the kernels is booting. Should I chroot and use  update-initramfs to create new initramfs? I guess initramfs is causing my problem, grub and boot partitions are fine.&lt;/p&gt;&#xA;&lt;p&gt;Clarification:&#xA;After following the accepted solution for my previous question, the problem with apt was solved and I was relieved. I quickly made my move to update all the kernel initramfs. After doing that I checked for updates, there were none. I rebooted to check if everything was fine, but I landed up here.&lt;/p&gt;&#xA;&lt;p&gt;I suspect the problem is specifically with initramfs, although you can feel free to ask any other information to better understand the problem I am facing&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I don't know if this is the proper way to respond/keep the thread active but can anybody elaborate what exactly am I supposed to do? Do I need to chroot? If yes then with what Distro? if no then do I need to enter the commands suggested to me in the busybox command line interface? I know something has went wrong with all of my initramfs. What is our objective? Do I update initramfs again or create new? I don't need to mess with grub and boot partition right? I will appreciate any help. Thank you.&lt;/p&gt;&#xA;&lt;p&gt;This same thread on Unix stack exchange:&#xA;&lt;a href=&quot;https://unix.stackexchange.com/questions/675486/elementary-os-6-not-booting-drops-into-initramfs-prompt&quot;&gt;https://unix.stackexchange.com/questions/675486/elementary-os-6-not-booting-drops-into-initramfs-prompt&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I am suspecting that this is an issue about my initramfs, after my apt broke, due to intramfs issue while updating, I fixed it with help of askubuntu forum and once that was fixed I updated intramfs for all my kernels. I guess I need to chroot using elementary os and recreate the initramfs. Can you diagnose the error in the photo. It may be due to Plymouth or nvidia as well.&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="27370" LastActivityDate="2021-11-05T06:00:22.637" Title="Elementary OS 6 not booting - drops into initramfs prompt" Tags="|boot|grub|nvidia|apt|plymouth|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29103" PostTypeId="1" CreationDate="2021-11-05T20:37:34.873" Score="0" ViewCount="451" Body="&lt;p&gt;On boot i get error message like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;integrity: Loading X.509 certificate: UEFI:db&#xA;integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'&#xA;integrity: Loading X.509 certificate: UEFI:db&#xA;integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'&#xA;integrity: Loading X.509 certificate: UEFI:db&#xA;integrity: Problem loading X.509 certificate -65&#xA;integrity: Error adding keys to platform keyring UEFI:db&#xA;integrity: Loading X.509 certificate: UEFI:MokListRT (MOKvar table)&#xA;integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;after no error i don't get and can use my laptop normally, but what is mean this error?&lt;/p&gt;&#xA;" OwnerUserId="27375" LastActivityDate="2024-03-25T09:04:15.483" Title="Boot error: Problem loading X.509 certificate -65" Tags="|boot|odin|error|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29105" PostTypeId="2" ParentId="29103" CreationDate="2021-11-05T21:56:04.957" Score="0" Body="&lt;p&gt;Often those are OEM certificates that are not valid anymore. Usually used for BIOS or firmware upgrades or some other crap. On my laptop I have two that fails to load, issuer CN=ABO and CN=DisablePW.&lt;/p&gt;&#xA;&lt;p&gt;You can check which certificate it is. First get list&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;dmesg | grep integrity&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Count in order which fails to load, then type&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;mokutil --db | grep Issuer:&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="23595" LastEditorUserId="23595" LastEditDate="2021-11-05T22:22:52.037" LastActivityDate="2021-11-05T22:22:52.037" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29108" PostTypeId="1" CreationDate="2021-11-06T20:27:34.723" Score="0" ViewCount="1728" Body="&lt;p&gt;Issue:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt upgrade -y&#xA;&#xA;Err:1 https://pkg.surfacelinux.com/debian release/main amd64 libwacom-surface amd64 1.12-2&#xA;  401  Unauthorized [IP: 185.199.110.133 443]&#xA;Err:2 https://pkg.surfacelinux.com/debian release/main amd64 linux-surface-secureboot-mok amd64 20211103-1&#xA;  401  Unauthorized [IP: 185.199.110.133 443]&#xA;E: Failed to fetch https://objects.githubusercontent.com/github-production-release-asset-2e65be/139604852/86019e52-7bfa-4bc6-8cc1-52147027aee6?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;amp;X-Amz-Credential=AKIAIWNJYAX4CSVEH53A/20211103/us-east-1/s3/aws4_request&amp;amp;X-Amz-Date=20211103T233837Z&amp;amp;X-Amz-Expires=300&amp;amp;X-Amz-Signature=055b509fac7b8b7008dd9b9ebaffe3d58479e71eb4e739557bb581c66c16a2a6&amp;amp;X-Amz-SignedHeaders=host&amp;amp;actor_id=0&amp;amp;key_id=0&amp;amp;repo_id=139604852&amp;amp;response-content-disposition=attachment; filename=libwacom-surface_1.12-2_amd64.deb&amp;amp;response-content-type=application/octet-stream  401  Unauthorized [IP: 185.199.110.133 443]&#xA;E: Failed to fetch https://objects.githubusercontent.com/github-production-release-asset-2e65be/211351605/1d335c4a-7dab-43d5-b588-fcaeeeddf6d9?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;amp;X-Amz-Credential=AKIAIWNJYAX4CSVEH53A/20211103/us-east-1/s3/aws4_request&amp;amp;X-Amz-Date=20211103T233838Z&amp;amp;X-Amz-Expires=300&amp;amp;X-Amz-Signature=aba11808b0a296208d160a4d94601c5a29c5d8b2d3c73d22f7e7c9eb421b04da&amp;amp;X-Amz-SignedHeaders=host&amp;amp;actor_id=0&amp;amp;key_id=0&amp;amp;repo_id=211351605&amp;amp;response-content-disposition=attachment; filename=linux-surface-secureboot-mok_20211103-1_amd64.deb&amp;amp;response-content-type=application/octet-stream  401  Unauthorized [IP: 185.199.110.133 443]&#xA;E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The Surface Linux community has had trouble upgrading or updating specific packages. They found that apt is not encoding special characters properly.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bad:  https://objects.githubusercontent.com/github-production-release-asset-2e65be/139604852/86019e52-7bfa-4bc6-8cc1-52147027aee6?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;amp;X-Amz-Credential=AKIAIWNJYAX4CSVEH53A/20211105/us-east-1/s3/aws4_request&amp;amp;X-Amz-Date=20211105T161053Z&amp;amp;X-Amz-Expires=300&amp;amp;X-Amz-Signature=2bc0c28946db539ada250b1030c37249dae909d73a68c90b5e7bfe7fecd5d347&amp;amp;X-Amz-SignedHeaders=host&amp;amp;actor_id=0&amp;amp;key_id=0&amp;amp;repo_id=139604852&amp;amp;response-content-disposition=attachment; filename=libwacom-surface_1.12-2_amd64.deb&amp;amp;response-content-type=application/octet-stream&#xA;&#xA;&#xA;good: https://objects.githubusercontent.com/github-production-release-asset-2e65be/139604852/86019e52-7bfa-4bc6-8cc1-52147027aee6?X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;amp;X-Amz-Credential=AKIAIWNJYAX4CSVEH53A%2F20211105%2Fus-east-1%2Fs3%2Faws4_request&amp;amp;X-Amz-Date=20211105T160935Z&amp;amp;X-Amz-Expires=300&amp;amp;X-Amz-Signature=44d9307e66dfb5b3672ee0082b8801ad2532ac4b6be61c3442fb265ffce72852&amp;amp;X-Amz-SignedHeaders=host&amp;amp;actor_id=0&amp;amp;key_id=0&amp;amp;repo_id=139604852&amp;amp;response-content-disposition=attachment%3B%20filename%3Dlibwacom-surface_1.12-2_amd64.deb&amp;amp;response-content-type=application%2Foctet-stream&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Several special characters have been encoded in the second (&amp;quot;good&amp;quot;) link. To verify this, I ran apt install libwacom-surface, took the failing link from that, and encoded the special characters in the places where they were encoded in the &amp;quot;good&amp;quot; link. Plugging that into wget works.&lt;/p&gt;&#xA;&lt;p&gt;So it seems that there's something wrong with the way apt handles special characters in some links (after all, wget gets this right)&#xA;Works with apt version 2.2.x, Ubuntu 20.04 (which I used to test in those comments) however uses 2.0.x.&lt;/p&gt;&#xA;&lt;p&gt;All of this is text from github comments about the issue.&lt;/p&gt;&#xA;&lt;p&gt;Testing and quoted text from StollD and qzed on github.&lt;/p&gt;&#xA;&lt;p&gt;Link to the original discussion: &lt;a href=&quot;https://github.com/linux-surface/linux-surface/issues/625&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/linux-surface/linux-surface/issues/625&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Right now we can wget the packages. Has anyone else received this error within the last week using apt?&lt;/p&gt;&#xA;" OwnerUserId="27378" LastActivityDate="2024-03-05T10:01:15.203" Title="Apt update fails with Error 401 Unauthorized" Tags="|updates|apt|ubuntu|elementary-project|surface-tablet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29110" PostTypeId="1" AcceptedAnswerId="29112" CreationDate="2021-11-07T06:20:39.997" Score="0" ViewCount="2034" Body="&lt;p&gt;Long time windoze user, so I need it step by step please.  :)&lt;/p&gt;&#xA;&lt;p&gt;I'm trying to install Elementary tweaks from Elementary-tweaks PPA.  I got the instructions from &lt;a href=&quot;https://elementaryforums.com/index.php?threads/tweaks.2549/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this post&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The first answer said you just need to run a few commands to do it.  First, add PPA's:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install software-properties-common&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When I did that it worked fine.  Next step. add  Elelmentary-tweaks PPA:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp; sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That went fine too.  Then you install it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install elementary-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When I do that, I get the following response (after entering password):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Preparing to unpack .../libgranite5_5.3.0-1_amd64.deb ...&#xA;Unpacking libgranite5:amd64 (5.3.0-1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libgranite5_5.3.0-1_amd64.deb (--unpack):&#xA; trying to overwrite '/usr/share/metainfo/granite.appdata.xml', which is also in package libgranite-common 6.1.2+r2170+pkg121~ubuntu6.1&#xA;Selecting previously unselected package elementary-tweaks.&#xA;Preparing to unpack .../elementary-tweaks_1.0-0~202010170103~ubuntu6.0.1_amd64.deb ...&#xA;Unpacking elementary-tweaks (1.0-0~202010170103~ubuntu6.0.1) ...&#xA;Errors were encountered while processing:&#xA; /var/cache/apt/archives/libgranite5_5.3.0-1_amd64.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;unknowable@Elite8300:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Looks like the relevant portion is here:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Unpacking libgranite5:amd64 (5.3.0-1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libgranite5_5.3.0-1_amd64.deb (--unpack):&#xA; trying to overwrite '/usr/share/metainfo/granite.appdata.xml', which is also in package libgranite-common 6.1.2+r2170+pkg121~ubuntu6.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That looks like I should remove libgranite6, install libgranite5, then reinstall libgranite6.  Unfortunately there's like a ton of stuff that depends on libgranite6.  Should I just notate everything that gets removed by removing libgranite6, then install libgranite5, then libgranite6, then just go through the list reinstalling every app that depended on libgranite6?&lt;/p&gt;&#xA;&lt;p&gt;Sorry for the possibly stupid question, but I'm a new Linux user, and the one time I did install tweaks in Kubuntu it went fine.  Thank you for your patience and investment of time.  It won't go unappreciated.&lt;/p&gt;&#xA;" OwnerUserId="27382" LastActivityDate="2021-11-07T08:46:24.540" Title="trying to install tweaks on Odin 6 install, error writing libgranite5" Tags="|settings|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29112" PostTypeId="2" ParentId="29110" CreationDate="2021-11-07T08:16:11.210" Score="2" Body="&lt;p&gt;Elementary tweaks are not made for Odin. You should be installing Pantheon tweaks instead &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-11-07T08:16:11.210" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29114" PostTypeId="2" ParentId="18245" CreationDate="2021-11-07T11:34:27.963" Score="0" Body="&lt;p&gt;Try this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ubuntu-restricted-extras libavcodec-extra&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will install additional video codecs that may resolve the issue.&lt;/p&gt;&#xA;" OwnerUserId="24433" LastEditorUserId="25612" LastEditDate="2021-11-08T19:11:40.057" LastActivityDate="2021-11-08T19:11:40.057" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29117" PostTypeId="1" CreationDate="2021-11-07T21:52:45.687" Score="1" ViewCount="168" Body="&lt;p&gt;I was hoping you could help me to the right direction. I have seen another post with the exact same issue though it was unanswered.&lt;/p&gt;&#xA;&lt;p&gt;AppCenter is showing the following components to be updated however it does not update them:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;4 components with updates:&#xA; • shim boot loader to chain-load signed boot loaders under Secure Boot Version: 15.4-0ubuntu9&#xA; • grub-common GRand Unified Bootloader (common files) Version: 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1&#xA; • grub-pc-bin GRand Unified Bootloader, version 2 (PC/BIOS binaries) Version: 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1&#xA; • grub2-common GRand Unified Bootloader (common files for version 2) Version: 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt upgrade&lt;/code&gt; shows me this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have been kept back:&#xA;  grub-common grub-pc grub-pc-bin grub2-common shim shim-signed&#xA;0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And &lt;code&gt;sudo apt full-upgrade&lt;/code&gt; gives me a warning message and I don't want to break my system, as I'm not a Linux expert would you guys tell me if this will not harm my system?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages were automatically installed and are no longer required:&#xA;  grub-pc-bin mokutil shim&#xA;Use 'sudo apt autoremove' to remove them.&#xA;The following packages will be REMOVED:&#xA;  grub-gfxpayload-lists grub-pc shim-signed&#xA;The following NEW packages will be installed:&#xA;  grub-efi-amd64&#xA;The following packages have been kept back:&#xA;  grub-common grub-pc-bin grub2-common&#xA;The following packages will be upgraded:&#xA;  shim&#xA;WARNING: The following essential packages will be removed.&#xA;This should NOT be done unless you know exactly what you are doing!&#xA;  shim-signed&#xA;1 upgraded, 1 newly installed, 3 to remove and 3 not upgraded.&#xA;Need to get 60,6 kB of archives.&#xA;After this operation, 5.662 kB disk space will be freed.&#xA;You are about to do something potentially harmful.&#xA;To continue type in the phrase 'Yes, do as I say!'&#xA; ?]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;OS: elementary OS 5.1.7 Hera - Linux 5.4.0-89-generic&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="27379" LastActivityDate="2021-11-07T21:52:45.687" Title="AppCenter not updating" Tags="|appcenter|apt|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29118" PostTypeId="1" CreationDate="2021-11-08T09:36:41.923" Score="1" ViewCount="39" Body="&lt;p&gt;&lt;code&gt;systemd-analyze&lt;/code&gt; outputs the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Startup finished in 3.917s (firmware) + 2.835s (loader) + 2.592s (kernel) + 2.192s (userspace) = 11.538s &#xA;graphical.target reached after 2.187s in userspace&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;However, I used my phone's stopwatch and getting to the login screen takes about a full minute. I tried press an arrow on the keyboard to see the output, but for most of the booting time there's just a blinking cursor on a black screen (can't type anything). I don't know if the issue is with the booting process or with LightDM.&lt;/p&gt;&#xA;&lt;p&gt;I'm dual-booting eOS 6 with Windows. The laptop has 8 GB of RAM and an 11th Gen Intel Core i7, so I don't think it should take that long.&#xA;Thanks in advance!&lt;/p&gt;&#xA;&lt;p&gt;Edit: this is the full &lt;code&gt;systemd-analyze blame&lt;/code&gt; output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;825ms snapd.service                                      &#xA;502ms apt-daily.service                                  &#xA;435ms fwupd-refresh.service                              &#xA;389ms lvm2-monitor.service                               &#xA;378ms fwupd.service                                      &#xA;330ms plymouth-quit-wait.service                         &#xA;326ms pantheon-parental-controls.service                 &#xA;280ms snapd.seeded.service                               &#xA;274ms dev-nvme0n1p7.device                               &#xA;266ms snap-gnome\x2d3\x2d38\x2d2004-76.mount             &#xA;263ms snap-snapd-13640.mount                             &#xA;261ms snap-onlyoffice\x2ddesktopeditors-81.mount         &#xA;236ms snap-core20-1169.mount                             &#xA;235ms snap-gnome\x2dsystem\x2dmonitor-169.mount          &#xA;234ms snap-gtk\x2dcommon\x2dthemes-1519.mount            &#xA;231ms systemd-logind.service                             &#xA;188ms snap-core18-2246.mount                             &#xA;171ms dev-loop1.device                                   &#xA;166ms dev-loop0.device                                   &#xA;133ms snap-bare-5.mount                                  &#xA;131ms accounts-daemon.service                            &#xA;131ms dev-loop2.device                                   &#xA;121ms networkd-dispatcher.service                        &#xA; 95ms ua-timer.service                                   &#xA; 91ms udisks2.service                                    &#xA; 87ms gpu-manager.service                                &#xA; 78ms upower.service                                     &#xA; 76ms dev-loop3.device                                   &#xA; 73ms systemd-cryptsetup@cryptswap.service               &#xA; 72ms user@1000.service                                  &#xA; 67ms user@114.service                                   &#xA; 61ms systemd-resolved.service                           &#xA; 56ms avahi-daemon.service                               &#xA; 55ms bluetooth.service                                  &#xA; 54ms NetworkManager.service                             &#xA; 52ms polkit.service                                     &#xA; 49ms dev-loop4.device                                   &#xA; 48ms systemd-udev-trigger.service                       &#xA; 44ms systemd-udevd.service                              &#xA; 43ms switcheroo-control.service                         &#xA; 42ms ModemManager.service                               &#xA; 42ms thermald.service                                   &#xA; 40ms geoclue.service                                    &#xA; 39ms systemd-journal-flush.service                      &#xA; 39ms wpa_supplicant.service                             &#xA; 36ms systemd-journald.service                           &#xA; 35ms keyboard-setup.service                             &#xA; 33ms dev-loop5.device                                   &#xA; 32ms systemd-timesyncd.service                          &#xA; 26ms secureboot-db.service                              &#xA; 23ms apparmor.service                                   &#xA; 23ms snapd.apparmor.service                             &#xA; 22ms plymouth-start.service                             &#xA; 22ms dev-mapper-cryptswap.swap                          &#xA; 20ms systemd-tmpfiles-setup.service                     &#xA; 19ms boot-efi.mount                                     &#xA; 17ms systemd-rfkill.service                             &#xA; 17ms lightdm.service                                    &#xA; 17ms systemd-tmpfiles-clean.service                     &#xA; 15ms systemd-modules-load.service                       &#xA; 15ms rsyslog.service                                    &#xA; 13ms e2scrub_reap.service                               &#xA; 12ms alsa-restore.service                               &#xA; 12ms systemd-random-seed.service                        &#xA; 12ms user-runtime-dir@114.service                       &#xA; 12ms colord.service                                     &#xA; 11ms plymouth-read-write.service                        &#xA; 10ms setvtrgb.service                                   &#xA;  9ms grub-common.service                                &#xA;  9ms systemd-sysusers.service                           &#xA;  9ms pppd-dns.service                                   &#xA;  8ms systemd-sysctl.service                             &#xA;  7ms systemd-tmpfiles-setup-dev.service                 &#xA;  7ms systemd-remount-fs.service                         &#xA;  7ms kerneloops.service                                 &#xA;  7ms dev-hugepages.mount                                &#xA;  6ms dev-mqueue.mount                                   &#xA;  6ms sys-kernel-debug.mount                             &#xA;  6ms sys-kernel-tracing.mount                           &#xA;  6ms systemd-backlight@backlight:intel_backlight.service&#xA;  5ms grub-initrd-fallback.service                       &#xA;  5ms blk-availability.service                           &#xA;  5ms user-runtime-dir@1000.service                      &#xA;  4ms kmod-static-nodes.service                          &#xA;  4ms dev-loop7.device                                   &#xA;  4ms systemd-update-utmp.service                        &#xA;  3ms dev-loop6.device                                   &#xA;  3ms systemd-update-utmp-runlevel.service               &#xA;  3ms systemd-user-sessions.service                      &#xA;  2ms console-setup.service                              &#xA;  2ms atd.service                                        &#xA;  1ms ufw.service                                        &#xA;  1ms rtkit-daemon.service                               &#xA;  1ms openvpn.service                                    &#xA;  1ms sys-fs-fuse-connections.mount                      &#xA;  1ms sys-kernel-config.mount                            &#xA;470us snapd.socket                                       &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="16906" LastEditorUserId="16906" LastEditDate="2021-11-08T21:26:55.117" LastActivityDate="2021-11-08T21:26:55.117" Title="Booting up takes longer than it should with a cursor on a black screen" Tags="|boot|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29120" PostTypeId="1" AcceptedAnswerId="29123" CreationDate="2021-11-08T22:58:37.000" Score="0" ViewCount="27" Body="&lt;p&gt;Touch gestures look so compelling in Odin that I would love to navigate elementary this way. But I installed it in regular PC and don't know what piece of hw will have the required support / drivers or features (i.e. 3 finger swypes)&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="25039" LastActivityDate="2021-11-09T00:48:28.307" Title="Good touchpad for desktop computer" Tags="|touchpad|odin|gesture|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29122" PostTypeId="1" AcceptedAnswerId="29129" CreationDate="2021-11-08T23:44:18.370" Score="0" ViewCount="95" Body="&lt;p&gt;Whats the difference between &amp;quot;AppCenter&amp;quot;, &amp;quot;AppCenter (System-wide)&amp;quot; and &amp;quot;elementary Updates&amp;quot;?&#xA;Thank you!&lt;/p&gt;&#xA;" OwnerUserId="25039" LastActivityDate="2021-11-09T20:15:08.370" Title="AppCenter installation options" Tags="|appcenter|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29123" PostTypeId="2" ParentId="29120" CreationDate="2021-11-09T00:48:28.307" Score="0" Body="&lt;p&gt;There aren't many great external touchpads that I've seen over the years, but the three options that have generally worked for colleagues using various versions of Linux include:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Apple Magic Touchpad&lt;/li&gt;&#xA;&lt;li&gt;Logitech T650 Wireless Touchpad&lt;/li&gt;&#xA;&lt;li&gt;Miyoshi TTP-BT01 (I think this one might be Japan-only)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The Apple touchpad is the best supported of the three, but it's also the most expensive. If this is something that you'd like to try before you buy, then there are cheaper models on Amazon that go for under $50. Driver support will be hit-or-miss, though.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-11-09T00:48:28.307" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29124" PostTypeId="1" AcceptedAnswerId="29126" CreationDate="2021-11-09T09:00:52.467" Score="0" ViewCount="145" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yqVAB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yqVAB.png&quot; alt=&quot;failed update message&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have tried to update latest update today (9.11.2011 or 11.9.2011 if you are American...)&#xA;and got the error message shown above.&lt;/p&gt;&#xA;&lt;p&gt;What should I do to solve this issue, please?&lt;/p&gt;&#xA;&lt;p&gt;using EOS 6 Odin&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2022-02-12T11:38:21.800" LastActivityDate="2022-02-12T11:38:21.800" Title="Failed update-what to do about it?" Tags="|updates|graphic-drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29125" PostTypeId="1" AcceptedAnswerId="29127" CreationDate="2021-11-09T09:02:39.023" Score="0" ViewCount="154" Body="&lt;p&gt;How can I fix unmet dependencies update error?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;linux-modules-nvidia-470-5.11.0-38-generic: Depends: nvidia-kernel-common-470 (&amp;lt;= 470.74-1) but 470.82.00-0ubuntu0.20.04.1 is to be installed&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2021-11-09T19:03:28.027" Title="How can I fix unmet dependencies update error" Tags="|updates|appcenter|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29126" PostTypeId="2" ParentId="29124" CreationDate="2021-11-09T18:56:39.617" Score="0" Body="&lt;p&gt;After a lot of interweb search I have eventually discovered:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove purge *nvidia*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;that has sorted things out and eventually after re-starting things have sorted themselves out...&lt;/p&gt;&#xA;&lt;p&gt;I know enough to be dangerous - you follow me at your own peril :-)&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;update 12.02.2022:&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;had the same problem on another PC and struggling :-(&lt;/p&gt;&#xA;&lt;p&gt;purging doesn't seem to be working...&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;an hour later..&lt;/strong&gt;&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;tried updating nvidia drivers and ended up with black screen&lt;/p&gt;&#xA;&lt;p&gt;bugger...&lt;/p&gt;&#xA;&lt;p&gt;the solution&lt;a href=&quot;https://i.stack.imgur.com/f2cA8.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/f2cA8.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;source:&#xA;&lt;a href=&quot;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&quot;&gt;https://askubuntu.com/questions/41681/blank-screen-after-installing-nvidia-restricted-driver&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2022-02-12T11:06:25.363" LastActivityDate="2022-02-12T11:06:25.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29127" PostTypeId="2" ParentId="29125" CreationDate="2021-11-09T19:03:28.027" Score="0" Body="&lt;p&gt;You can try the solution that has worked for me (I have posted the same issue just before you):&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29124/failed-update-what-to-do-about-it/29126#29126&quot;&gt;Failed update-what to do about it?&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-11-09T19:03:28.027" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29129" PostTypeId="2" ParentId="29122" CreationDate="2021-11-09T20:15:08.370" Score="0" Body="&lt;p&gt;elementary OS distributes some software as &lt;a href=&quot;https://www.flatpak.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatpaks&lt;/a&gt;, and some as &lt;a href=&quot;https://www.debian.org/doc/manuals/debian-faq/pkg-basics.en.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Debian packages&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Debian packages provide the core system libraries and software, like the kernel, command line utilities, and graphical applications that haven't yet been updated to the newer and more secure Flatpak format.&lt;/p&gt;&#xA;&lt;p&gt;elementary has recently been working on moving their software to the Flatpak format as well, which is why you see &amp;quot;AppCenter&amp;quot; or &amp;quot;AppCenter (system-wide)&amp;quot; showing up for software in AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;Long story short:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&amp;quot;AppCenter&amp;quot; means an app is a Flatpak installed for your user only&lt;/li&gt;&#xA;&lt;li&gt;&amp;quot;AppCenter (system-wide)&amp;quot; means an app is a Flatpak installed for all users on your system (think Music or Camera or Web)&lt;/li&gt;&#xA;&lt;li&gt;&amp;quot;elementary Updates&amp;quot; refers to system libraries/software installed via Debian packages (the kernel, bash, systemd, etc)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;If you want to greatly increase the software selection in AppCenter, you can also add the &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flathub remote&lt;/a&gt;, which will make even more software available in the Flatpak format.&lt;/p&gt;&#xA;" OwnerUserId="27404" LastActivityDate="2021-11-09T20:15:08.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29130" PostTypeId="1" CreationDate="2021-11-09T21:56:30.063" Score="1" ViewCount="257" Body="&lt;p&gt;In previous version of &amp;quot;elementary OS&amp;quot; there was the possibility to launch the installation of the OS from the terminal with the command &amp;quot;ubiquity -b&amp;quot;. The &amp;quot;-b&amp;quot; option avoided the installation of the GRUB boot-loader.&#xA;As far as I understood elementary OS 6 does not use &amp;quot;ubiquity&amp;quot; installer anymore but uses the &amp;quot;io.elementary.installer&amp;quot; installer. Does anyone know if there is an option to launch this installer avoiding the installation of the GRUB boot-loader? Or is there any other way to avoid this installation? I am asking because I am trying to install elemetary OS on my old macbook, where I have installed &amp;quot;rEFInd&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Thank you&lt;/p&gt;&#xA;&lt;p&gt;Marco&lt;/p&gt;&#xA;" OwnerUserId="27405" LastActivityDate="2022-05-22T04:11:06.103" Title="Elementary OS 6 installation without grub boot-loader" Tags="|grub|macbook|install|odin|refind|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29131" PostTypeId="2" ParentId="16502" CreationDate="2021-11-09T22:24:40.133" Score="0" Body="&lt;p&gt;If somebody's looking for the current(ly) latest version 0.6 Odin, then&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lafydev/wingpanel-indicator-ayatana&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;should be his friend. Just tested and seems to work all fine.&lt;/p&gt;&#xA;" OwnerUserId="27130" LastActivityDate="2021-11-09T22:24:40.133" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29132" PostTypeId="1" CreationDate="2021-11-10T11:38:59.553" Score="0" ViewCount="362" Body="&lt;p&gt;I just did a fresh install of Elementary OS 6 Odin and I installed apps that I need and uninstalled these I don't need, so I uninstalled Epiphany and Camera app from AppCenter. After few hours I realised I still have these apps in Application Menu...&#xA;I tried &lt;code&gt;sudo apt-get autoremove&lt;/code&gt;, I also tried &lt;code&gt;sudo apt-get remove epiphany-browser&lt;/code&gt;. It doesn't work. I don't have these apps in &lt;code&gt;/usr/share/applications&lt;/code&gt; or &lt;code&gt;~/.local/share/applications&lt;/code&gt;. When I try to uninstall them using Application Menu I get the popup saying&#xA;&lt;code&gt;Program status is not set as Installed in AppCenter for package: Web Browser for GNOME&lt;/code&gt;. Anyone have a fix for this?&lt;/p&gt;&#xA;" OwnerUserId="26272" LastActivityDate="2024-01-22T16:01:25.257" Title="Remove uninstalled apps from application menu" Tags="|appcenter|applications|slingshot|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29133" PostTypeId="1" CreationDate="2021-11-10T14:23:35.517" Score="0" ViewCount="66" Body="&lt;p&gt;When trying to install from VMware Workstation Player I am unable to continue with the installer. The resolution is not detected by Elementary OS properly, and this leads to the installer screen being cutoff. None of the buttons on the bottom-right of the screen are clickable. This can lead to a bad first-user experience if they are wanting to try this out in a VM before committing to installing on their PC.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/jhJlT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/jhJlT.png&quot; alt=&quot;VMware Workstation Player Screenshot&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;In Workstation Player I have the monitor resolution set to 1920x1080, however Elementary OS does not detect this properly.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/7gfRu.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7gfRu.png&quot; alt=&quot;Workstation Player Settings&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27409" LastEditorUserId="27409" LastEditDate="2021-11-10T14:48:29.493" LastActivityDate="2024-03-29T20:06:05.677" Title="Install from VMware Workstation Player screen is cutoff and unable to continue installation" Tags="|system-installation|release-odin|virtualization|bugs|live-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29134" PostTypeId="2" ParentId="29133" CreationDate="2021-11-10T14:47:07.387" Score="0" Body="&lt;p&gt;I found &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/p2zsss/cannot_install_odin_on_virtualbox_because_of/h8nrthu&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; Reddit comment which seems to fix the issue, however since this doesn't happen with the Ubuntu, Fedora, or Solus installers I would still consider it a bug that Elementary OS should fix. As we are seeing with recent media coverage (LTT), the new user experience on Linux is essential to getting folks to adopt.&lt;/p&gt;&#xA;&lt;p&gt;Reddit comments content in case it gets deleted at some point:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;I used Workstation Player and wasn't able to enable EFI in the UI, but added a line to the VM file (.vmx), so the first three lines look like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;.encoding = &amp;quot;windows-1252&amp;quot;&#xA;config.version = &amp;quot;8&amp;quot;&#xA;firmware=&amp;quot;efi&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Posted by u/3point147ersMorgan&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="27409" LastEditorUserId="27409" LastEditDate="2021-11-10T14:52:09.237" LastActivityDate="2021-11-10T14:52:09.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29137" PostTypeId="2" ParentId="25797" CreationDate="2021-11-10T18:31:15.950" Score="0" Body="&lt;p&gt;I really like Elementary OS, but I switched to Pop! OS recently due to easier Wayland support (for Waydroid...).  The Elementary OS blog does mention that &amp;quot;future&amp;quot; versions will be use Wayland, so I will look into it again in the future.&lt;/p&gt;&#xA;&lt;p&gt;Also, instead of using Fractional Scaling, there is a perhaps better way, which is to change the virtual screen resolution using xrandr.  You can find out more about this by checking the post on the frame.work computer forums written by the Elementary OS developer.  This method might be slightly lower performance, but it should be much more compatible with older apps, etc.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://community.frame.work/t/using-elementary-os-on-the-framework-laptop/4453&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://community.frame.work/t/using-elementary-os-on-the-framework-laptop/4453&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This should work on any device, not just the Framework laptop.&lt;/p&gt;&#xA;" OwnerUserId="27412" LastActivityDate="2021-11-10T18:31:15.950" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29138" PostTypeId="1" CreationDate="2021-11-11T00:59:27.033" Score="0" ViewCount="318" Body="&lt;p&gt;I'm on elementary OS Odin and I can't seem to get media keys to work with various applications.&lt;/p&gt;&#xA;&lt;p&gt;I have been using elementary OS with the same keyboard for almost a decade, and Odin does not seem to actually use the next/previous and play/pause media shortcuts to control actively playing media. It's also not just my keyboard, my mouse has the key combination mapped to additional buttons, and I've been using the same mouse for multiple elementary OS releases.&lt;/p&gt;&#xA;&lt;p&gt;I originally thought this was a problem with the &lt;code&gt;snap&lt;/code&gt; integration for Spotify, so I installed it via &lt;code&gt;flatpak&lt;/code&gt; and the problem persists. I've also tried to use Music (formerly Noise) and nothing seems to actually listen to the media keys. I tried going into the settings and setting the media keys for controlling playback, but no dice.&lt;/p&gt;&#xA;&lt;p&gt;Using the sound panel dropdown from wingpanel's top right does see the D-Bus media sources and can control playback, next/previous, so clearly the applications do respond to the right D-Bus interfaces, but it seems that all media key activity is going to /dev/null on Odin.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; I have reported the bug to the elementary team at &lt;a href=&quot;https://github.com/elementary/os/issues/569&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/os#569&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="7" LastEditorUserId="7" LastEditDate="2021-11-12T19:56:44.940" LastActivityDate="2021-11-12T19:56:44.940" Title="Play/Pause/Next/Previous Media Keys Don't Work" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29140" PostTypeId="1" CreationDate="2021-11-11T05:22:56.460" Score="0" ViewCount="189" Body="&lt;p&gt;I have a 2104 iMac that I want to install elementary on.&#xA;I can boot from a USB drive and then get presented with an option to enter my wireless network password which I can do no problem - mouse and keyboard working at that point.&#xA;After doing that I can click on a drive icon on the screen which says EFI Boot (there are 2 of those icons for some reason. I have tried booting from both of them.)&lt;/p&gt;&#xA;&lt;p&gt;It then starts to go through the elementary install process and I get presented with a screen to select my language and thats where I am dead in the water. Both mouse and keyboard are unresponsive at that point.&#xA;I really want try try elementary but am unable to.&#xA;Any ideas or help much appreciated.&#xA;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="27416" LastActivityDate="2024-04-05T13:35:02.253" Title="Can't install - Mac Bluetooth mouse and keyboard not recognized" Tags="|boot|bluetooth|install|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29141" PostTypeId="1" AcceptedAnswerId="29142" CreationDate="2021-11-11T18:08:29.340" Score="0" ViewCount="109" Body="&lt;p&gt;Commans like &lt;code&gt;sudo pantheon-files&lt;/code&gt; don't works. Has a command on terminal to acess the Files?&lt;/p&gt;&#xA;" OwnerUserId="27419" LastActivityDate="2021-11-12T16:24:39.840" Title="How acess the Files with terminal?" Tags="|pantheon-files|files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29142" PostTypeId="2" ParentId="29141" CreationDate="2021-11-11T18:57:24.493" Score="0" Body="&lt;p&gt;you can use &lt;code&gt;io.elementary.files&lt;/code&gt;, this will open in the last path you acessed but you can entry a path or run &lt;code&gt;io.elementary.files --help&lt;/code&gt; to see more options&lt;/p&gt;&#xA;" OwnerUserId="27420" LastEditorUserId="27420" LastEditDate="2021-11-12T16:24:39.840" LastActivityDate="2021-11-12T16:24:39.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29143" PostTypeId="1" CreationDate="2021-11-12T06:52:08.243" Score="0" ViewCount="220" Body="&lt;p&gt;Earlier today I went ahead and replaced MacOS with Manjaro Deepin, but I decided to shop around some more for other distros and came across Elementary OS. Everything on Elementary seems to be working fine aside from the keyboard backlight, something that did work on Manjaro. Resources regarding this, on StackExchange, GitHub, Reddit etc. are very sparse and I've tried everything I've been able to find through three hours of research. Where do I start looking here? I'm not sure if there is something built into Ubuntu already that globally controls keyboard lighting, or if I have to write some kind of script for this et cetera.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas? I managed to map the volume keys to the corresponding mac keybord function keys through the keyboard settings, but as far as backlight goes I'm at a total loss. Any help is appreciated, worst case scenario I'll have to go back to Manjaro but I quite like elementary.&lt;/p&gt;&#xA;" OwnerUserId="27423" LastEditorUserId="27423" LastEditDate="2021-11-12T07:03:17.350" LastActivityDate="2024-01-01T16:04:15.537" Title="How can I enable and adjust Macbook Pro 2013's keyboard backlight?" Tags="|keyboard|macbook|backlight|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29144" PostTypeId="2" ParentId="29143" CreationDate="2021-11-12T07:05:32.480" Score="0" Body="&lt;p&gt;&lt;strong&gt;edit: worked it out myself by dumb luck.&lt;/strong&gt; For anyone in the future that happens to have this issue, there is indeed a built-in global keyboard brightness feature in ubuntu. It's located at &lt;code&gt;/sys/class/leds/smc::kbd_backlight&lt;/code&gt; where you can edit a bunch of things, but what's most interesting is the &amp;quot;brightness&amp;quot; config file. You can edit this directly in Terminal by writing the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo [value] | sudo tee /sys/class/leds/smc::kbd_backlight/brightness&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change &lt;code&gt;[value]&lt;/code&gt; to what you want your brightness to be, the max is set to 255 and that is what I went with. I assume keyboard shortcuts can be added that references this so that you can lower and raise it incrementally, but personally I don't care so I won't do that. Oh well, you live and you learn.&lt;/p&gt;&#xA;" OwnerUserId="27423" LastEditorUserId="25612" LastEditDate="2021-12-12T09:12:01.060" LastActivityDate="2021-12-12T09:12:01.060" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29145" PostTypeId="2" ParentId="29141" CreationDate="2021-11-12T10:52:25.103" Score="0" Body="&lt;p&gt;If your intention is to open the files as an administrator, it is simple:&#xA;&lt;em&gt;Right click on Files, new window as administrator.&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="16936" LastActivityDate="2021-11-12T10:52:25.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29146" PostTypeId="2" ParentId="29132" CreationDate="2021-11-12T10:57:40.070" Score="0" Body="&lt;p&gt;Use the menulibre to do this: &lt;code&gt;sudo apt install menulibre&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="16936" LastActivityDate="2021-11-12T10:57:40.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29147" PostTypeId="1" AcceptedAnswerId="29182" CreationDate="2021-11-12T16:03:29.703" Score="0" ViewCount="82" Body="&lt;p&gt;Don't know what happened and why it doesn't work any more (EOS 6 Odin).&#xA;If (for example) I open LibreOffice Calc it just doesn't show in the dock.&#xA;It always used to?&#xA;Has anything changed? or am I doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-11-21T09:39:30.650" Title="active apps do not appear in the dock" Tags="|plank|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29148" PostTypeId="2" ParentId="29040" CreationDate="2021-11-12T18:11:55.627" Score="0" Body="&lt;p&gt;This issue was mentioned on &lt;a href=&quot;https://github.com/elementary/portals/issues/33&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github&lt;/a&gt; and an &lt;a href=&quot;https://github.com/elementary/portals/releases/tag/1.0.1&quot; rel=&quot;nofollow noreferrer&quot;&gt;update&lt;/a&gt; from elementary has been pushed out to resolve this issue. Update your system through AppCenter and the issue should be resolved!&lt;/p&gt;&#xA;" OwnerUserId="27428" LastActivityDate="2021-11-12T18:11:55.627" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29149" PostTypeId="2" ParentId="29138" CreationDate="2021-11-12T18:12:10.927" Score="1" Body="&lt;p&gt;Same issue with my thumb buttons on mouse Logitech G305 after reinstalling elementary Hera to Odin. I use 2 keys for Play/Pause and Next Track in Spotify (snap version). I've tried the same ways that you. It's definitely the problem with new OS Odin.&lt;/p&gt;&#xA;&lt;p&gt;I found &lt;a href=&quot;https://www.linuxuprising.com/2019/11/how-to-bind-mouse-buttons-to-keyboard.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;the article&lt;/a&gt; and it helped me. Interesting thing, that if you bind your buttons with media presets, OS can't see when you click them (accordingly to xev tool). So I've rebinded them using OS Windows with Logitech G HUB software and set default values (forward / backward for navigation). After that OS Odin saw the response hence I need to rebind these keys again using ubuntu's tools.&lt;/p&gt;&#xA;&lt;p&gt;Further instructions from the article. Thanks to the author &lt;strong&gt;Logix&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;To bind the mouse buttons to key combinations we'll use the following tools:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;- xbindkeys:&lt;/strong&gt; a program that grab keys and mouse button events in X and starts associated shell command&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;- xev:&lt;/strong&gt; a tool that prints contents of X events&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;1. Install xbindkeys, xev&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install xbindkeys x11-utils&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;2. Grab the mouse button codes&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;To get the mouse button code(s), run this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xev | grep button&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, focus the small window that pops up and watch the terminal output. Now press the mouse button for which you want to grab the code. After pressing the button you should see its code in the terminal.&#xA;For instance:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;state 0x10, button 8, same_screen YES&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;In this example, the button code we'll need later is &lt;strong&gt;8&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;3. Grab the keystrokes that we'll later send using a mouse button&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;But in case of media keys/buttons we need XF86Audio* multimedia key symbols.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;XF86AudioMute XF86AudioNext XF86AudioPause XF86AudioPlay XF86AudioPrev&#xA;XF86AudioLowerVolume XF86AudioRaiseVolume XF86AudioRecord&#xA;XF86AudioRewind XF86AudioStop&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;4. Create the xbindkeys configuration (in ~/.xbindkeysrc)&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;You may either create an empty ~/.xbindkeysrc file, or generate a sample configuration file using this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys -d &amp;gt; ~/.xbindkeysrc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Next, open &lt;strong&gt;~/.xbindkeysrc&lt;/strong&gt; with your favorite text editor. Note that .xbindkeysrc is a hidden file in your home directory so you'll need to press Ctrl + h (to show hidden files and folders) to see it in your file manager.&lt;/p&gt;&#xA;&lt;p&gt;To bind a mouse button to a key combination, paste the following at the end of the &lt;strong&gt;~/.xbindkeysrc&lt;/strong&gt; file (it may already contain some key binds, it may contain the sample configuration or it can be empty - it doesn't matter):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;quot;xdotool key 'KEY-COMBINATION'&amp;quot;&#xA;       b:MOUSE-BUTTON-CODE&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Where:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;em&gt;KEY-COMBINATION&lt;/em&gt; are the keystrokes you got under step 3 (separate the keys with a + sign)&lt;/li&gt;&#xA;&lt;li&gt;&lt;em&gt;MOUSE-BUTTON-CODE&lt;/em&gt; is the mouse button code that you got under step 2&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;quot;xdotool key 'XF86AudioPlay'&amp;quot;&#xA;       b:8&#xA;&#xA;&amp;quot;xdotool key 'XF86AudioNext'&amp;quot;&#xA;       b:9&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;5. Start xbindkeys&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now you can start xbindkeys using a terminal and typing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;In case xbindkeys was running, you can get it to use the new configuration by issuing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xbindkeys --poll-rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This command can failed in a few cases. In such a case you can restart it by killing the xbindkeys process and running it again:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;killall xbindkeys&#xA;xbindkeys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;On Ubuntu distros, xbindkeys is automatically started on system startup if it finds a non-empty (it needs to have lines that are not commented out) &lt;strong&gt;~/.xbindkeysrc&lt;/strong&gt; configuration file.&lt;/p&gt;&#xA;" OwnerUserId="27427" LastActivityDate="2021-11-12T18:12:10.927" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29150" PostTypeId="1" CreationDate="2021-11-13T07:46:48.017" Score="0" ViewCount="44" Body="&lt;p&gt;I'm using Elementary OS 6 as guest through Oracle VM VirtualBox in host Ubuntu 20.04 desktop. I would like to configure Mobile Hotspot in the Elementary through WIFI Adapter. This is possible in Ubuntu &amp;amp; Windows too. It may be possible in Elementary but due to my ignorance. However, I couldn't find any wifi button in Network Page of Elementary. There are only 3 buttons viz. Wired, VPN, Proxy. Need advise from community members.&lt;/p&gt;&#xA;" OwnerUserId="19156" LastActivityDate="2021-11-13T07:46:48.017" Title="CONFIGURATION OF MOBILE WIFI HOTSPOT IN ELEMENTARY OS 6 ODIN DESKTOP" Tags="|wifi|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29159" PostTypeId="2" ParentId="17876" CreationDate="2021-11-15T12:30:50.860" Score="0" Body="&lt;br&gt;&#xA;I had the same problem and after a while I found an easy solution.&#xA;&lt;p&gt;Press fn+F2 key to enter  BIOS: &lt;br&gt;&#xA;Enable F12 Boot Menu&lt;br&gt;&#xA;Set Supervisor Password&lt;br&gt;&#xA;Disable Secure Boot&lt;br&gt;&#xA;Press F10 to save and exit,&lt;/p&gt;&#xA;&lt;p&gt;then press F12 to enter boot menu, and start live session.&lt;/p&gt;&#xA;&lt;p&gt;Open your terminal and follow these steps to &lt;strong&gt;install bootloader&lt;/strong&gt;.&#xA;Boot from live USB and open terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo -s&#xA;fdisk -l &#xA;&#xA;mount /dev/mmcblk0p2 /mnt&#xA;# 0p2 is your file system partition (your root drive)&#xA;# 0p1 is your boot partition&#xA;&#xA;mkdir /mnt/boot/efi&#xA;#create folders&#xA;&#xA;mount /dev/mmcblk0p1 /mnt/boot/efi&#xA;# mount boot partition in to new created folders&#xA;&#xA;for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done&#xA;# mount others systems directories&#xA;&#xA;modprobe efivars&#xA;efibootmgr --verbose&#xA;apt-get install --reinstall grub-efi-amd64&#xA;grub-install -no-nvram -root-directory=/mnt&#xA;chroot /mnt&#xA;update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now you should be able to boot from eMMC SDD drive.&lt;/p&gt;&#xA;&lt;p&gt;Source:&#xA;&lt;a href=&quot;https://dantalion.nl/en/installing-ubuntu-on-acer-spin-uefi-devices/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dantalion.nl/en/installing-ubuntu-on-acer-spin-uefi-devices/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27446" LastActivityDate="2021-11-15T12:30:50.860" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29160" PostTypeId="1" CreationDate="2021-11-16T04:20:24.670" Score="1" ViewCount="27" Body="&lt;p&gt;I have Elementary OS 6 Odin installed on a laptop that can triple boot Windows, Elementary and Zorin OS. When I try to update it from the ApppCenter, I get this message (can't install any software too):&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gZ5Nl.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gZ5Nl.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Error while installing package: installed org.gnome.fileroller package post-installation script subprocess returned error exit status 1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;At the terminal, I get this after &lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;8 packages can be upgraded. Run 'apt list --upgradable' to see them.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;W: mirror://mirrors.ubuntu.com/mirrors.txt/dists/focal-updates/InRelease: No system certificates available. Try installing ca-certificates.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;W: &lt;a href=&quot;https://la.mirrors.clouvider.net/ubuntu/dists/focal-updates/main/binary-amd64/by-hash/SHA256/43ee4298b0875017554ed312414449b7e8cfa6055a0e47cef9da74350bf9355d&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://la.mirrors.clouvider.net/ubuntu/dists/focal-updates/main/binary-amd64/by-hash/SHA256/43ee4298b0875017554ed312414449b7e8cfa6055a0e47cef9da74350bf9355d&lt;/a&gt;: No system certificates available. Try installing ca-certificates.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;W: &lt;a href=&quot;https://mirrors.bloomu.edu/ubuntu/dists/focal-updates/universe/dep11/by-hash/SHA256/fc3d0692ad719efd35181078eabd24df193ee3834ec04cca52593b550a9917bd&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://mirrors.bloomu.edu/ubuntu/dists/focal-updates/universe/dep11/by-hash/SHA256/fc3d0692ad719efd35181078eabd24df193ee3834ec04cca52593b550a9917bd&lt;/a&gt;: No system certificates available. Try installing ca-certificates.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Update 1:&lt;/p&gt;&#xA;&lt;p&gt;After &lt;code&gt;sudo apt install --reinstall ca-certificates&lt;/code&gt;, &lt;a href=&quot;https://pastebin.com/UBUrqTFS&quot; rel=&quot;nofollow noreferrer&quot;&gt;this came out.&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;These are my &lt;a href=&quot;https://pastebin.com/vb2wMGxd&quot; rel=&quot;nofollow noreferrer&quot;&gt;certificates&lt;/a&gt;  from &lt;code&gt;ls -l /etc/ssl/certs&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="27452" LastEditorUserId="27452" LastEditDate="2021-11-17T08:28:03.237" LastActivityDate="2021-11-17T08:28:03.237" Title="Cannot Update: Failed to update “Shortcuts”" Tags="|apt|odin|app-shortcuts|update-manager|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29161" PostTypeId="2" ParentId="24282" CreationDate="2021-11-16T08:53:35.297" Score="0" Body="&lt;p&gt;&lt;code&gt;       ubuntu|linuxmint|debian|zorin|kubuntu|elementary)&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Could work, but since this mod is maybe needed in other files, faking your os ID may work better:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo SETUP KLUDGE OF OS RELEASE to ubuntu&#xA;sudo mv /etc/os-release /etc/os-release-backup&#xA;sudo cat /etc/os-release-backup | sudo grep -v ^ID= &amp;gt; /etc/os-release-ubuntu&#xA;sudo echo &amp;quot;ID=ubuntu&amp;quot; &amp;gt;&amp;gt; /etc/os-release-ubuntu&#xA;sudo mv /etc/os-release-ubuntu /etc/os-release&#xA;cat /etc/os-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then &lt;code&gt;./amdgpu-pro-install -y&lt;/code&gt; and to restore the backup and put back to what you had:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;echo REMOVE KLUDGE OF OS RELEASE restore backup&#xA;sudo mv /etc/os-release        /etc/os-release-ubuntu&#xA;sudo mv /etc/os-release-backup /etc/os-release&#xA;cat /etc/os-release&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Careful with the &amp;gt; it likes to wipe files.&#xA;Use &amp;gt;&amp;gt; to add / append to them. Not sure if the order matters.&lt;/p&gt;&#xA;" OwnerUserId="27454" LastActivityDate="2021-11-16T08:53:35.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29162" PostTypeId="1" CreationDate="2021-11-16T11:21:31.663" Score="0" ViewCount="166" Body="&lt;p&gt;I've gone through the steps of installing jdk, jre, etc. on Elementary OS Hera, based on &lt;strong&gt;Ubuntu 18.04&lt;/strong&gt;. I downloaded Android Studio, extracted, gave the correct permissions, etc. but when running it I get some errors&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;sh ./studio.sh&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Start Failed&#xA;Internal error. Please refer to https://code.google.com/p/android/issues&#xA;&#xA;com.intellij.ide.plugins.StartupAbortedException: UI initialization failed&#xA;    at com.intellij.idea.StartupUtil.lambda$prepareApp$3(StartupUtil.java:194)&#xA;    at java.base/java.util.concurrent.CompletableFuture.uniExceptionally(CompletableFuture.java:986)&#xA;    at java.base/java.util.concurrent.CompletableFuture.uniExceptionallyStage(CompletableFuture.java:1004)&#xA;    at java.base/java.util.concurrent.CompletableFuture.exceptionally(CompletableFuture.java:2307)&#xA;    at com.intellij.idea.StartupUtil.prepareApp(StartupUtil.java:193)&#xA;    at com.intellij.ide.plugins.MainRunner.lambda$start$1(MainRunner.java:41)&#xA;    at java.base/java.lang.Thread.run(Thread.java:829)&#xA;Caused by: java.util.concurrent.CompletionException: java.lang.UnsatisfiedLinkError: Can't load library: /usr/lib/jvm/java-11-openjdk-amd64/lib/libawt_xawt.so&#xA;    at java.base/java.util.concurrent.CompletableFuture.encodeThrowable(CompletableFuture.java:331)&#xA;    at java.base/java.util.concurrent.CompletableFuture.andTree(CompletableFuture.java:1452)&#xA;    at java.base/java.util.concurrent.CompletableFuture.allOf(CompletableFuture.java:2337)&#xA;    at com.intellij.idea.StartupUtil.scheduleInitUi(StartupUtil.java:401)&#xA;    at com.intellij.idea.StartupUtil.prepareApp(StartupUtil.java:192)&#xA;    ... 2 more&#xA;Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /usr/lib/jvm/java-11-openjdk-amd64/lib/libawt_xawt.so&#xA;    at java.base/java.lang.ClassLoader.loadLibrary(ClassLoader.java:2630)&#xA;    at java.base/java.lang.Runtime.load0(Runtime.java:768)&#xA;    at java.base/java.lang.System.load(System.java:1837)&#xA;    at java.base/java.lang.ClassLoader$NativeLibrary.load0(Native Method)&#xA;    at java.base/java.lang.ClassLoader$NativeLibrary.load(ClassLoader.java:2442)&#xA;    at java.base/java.lang.ClassLoader$NativeLibrary.loadLibrary(ClassLoader.java:2498)&#xA;    at java.base/java.lang.ClassLoader.loadLibrary0(ClassLoader.java:2694)&#xA;    at java.base/java.lang.ClassLoader.loadLibrary(ClassLoader.java:2648)&#xA;    at java.base/java.lang.Runtime.loadLibrary0(Runtime.java:830)&#xA;    at java.base/java.lang.System.loadLibrary(System.java:1873)&#xA;    at java.desktop/java.awt.Toolkit$3.run(Toolkit.java:1399)&#xA;    at java.desktop/java.awt.Toolkit$3.run(Toolkit.java:1397)&#xA;    at java.base/java.security.AccessController.doPrivileged(Native Method)&#xA;    at java.desktop/java.awt.Toolkit.loadLibraries(Toolkit.java:1396)&#xA;    at java.desktop/java.awt.Toolkit.&amp;lt;clinit&amp;gt;(Toolkit.java:1429)&#xA;    at java.desktop/java.awt.EventQueue.invokeLater(EventQueue.java:1312)&#xA;    at com.intellij.idea.StartupUtil.lambda$scheduleInitUi$9(StartupUtil.java:326)&#xA;    at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128)&#xA;    at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628)&#xA;    at java.base/java.util.concurrent.Executors$PrivilegedThreadFactory$1$1.run(Executors.java:668)&#xA;    at java.base/java.util.concurrent.Executors$PrivilegedThreadFactory$1$1.run(Executors.java:665)&#xA;    at java.base/java.security.AccessController.doPrivileged(Native Method)&#xA;    at java.base/java.util.concurrent.Executors$PrivilegedThreadFactory$1.run(Executors.java:665)&#xA;    ... 1 more&#xA;&#xA;-----&#xA;Your JRE: 11.0.11+9-Ubuntu-0ubuntu2.18.04 amd64 (Ubuntu)&#xA;/usr/lib/jvm/java-11-openjdk-amd64&#xA;&#xA;Also, a UI exception occurred on an attempt to show the above message&#xA;java.lang.NoClassDefFoundError: Could not initialize class java.awt.Toolkit&#xA;    at java.desktop/java.awt.Component.&amp;lt;clinit&amp;gt;(Component.java:621)&#xA;    at com.intellij.idea.Main.showMessage(Main.java:317)&#xA;    at com.intellij.idea.Main.showMessage(Main.java:270)&#xA;    at com.intellij.ide.plugins.StartupAbortedException.logAndExit(StartupAbortedException.java:86)&#xA;    at com.intellij.ide.plugins.StartupAbortedException.processException(StartupAbortedException.java:34)&#xA;    at com.intellij.idea.StartupUtil.lambda$prepareApp$3(StartupUtil.java:194)&#xA;    at java.base/java.util.concurrent.CompletableFuture.uniExceptionally(CompletableFuture.java:986)&#xA;    at java.base/java.util.concurrent.CompletableFuture.uniExceptionallyStage(CompletableFuture.java:1004)&#xA;    at java.base/java.util.concurrent.CompletableFuture.exceptionally(CompletableFuture.java:2307)&#xA;    at com.intellij.idea.StartupUtil.prepareApp(StartupUtil.java:193)&#xA;    at com.intellij.ide.plugins.MainRunner.lambda$start$1(MainRunner.java:41)&#xA;    at java.base/java.lang.Thread.run(Thread.java:829)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When running &lt;strong&gt;java -version&lt;/strong&gt; I get this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;openjdk version &amp;quot;11.0.11&amp;quot; 2021-04-20&#xA;OpenJDK Runtime Environment (build 11.0.11+9-Ubuntu-0ubuntu2.18.04)&#xA;OpenJDK 64-Bit Server VM (build 11.0.11+9-Ubuntu-0ubuntu2.18.04, mixed mode)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm almost sure I've installed all the 64b. packages of each (jdk, jre)&lt;/p&gt;&#xA;&lt;p&gt;I've also tried &lt;strong&gt;sudo update-alternatives --config java&lt;/strong&gt;&#xA;I get these options (but Android Studio won't launch on any)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Existen 2 opciones para la alternativa java (que provee /usr/bin/java).&#xA;&#xA;  Selección   Ruta                                            Prioridad  Estado&#xA;------------------------------------------------------------&#xA;* 0            /usr/lib/jvm/java-11-openjdk-amd64/bin/java      1111      modo automático&#xA;  1            /usr/lib/jvm/java-11-openjdk-amd64/bin/java      1111      modo manual&#xA;  2            /usr/lib/jvm/java-8-openjdk-amd64/jre/bin/java   1081      modo manual&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Thanks for any suggestion you can give me&lt;/p&gt;&#xA;" OwnerUserId="95" LastActivityDate="2024-04-04T18:01:15.180" Title="Problem starting Android Studio on Elementary Hera" Tags="|release-hera|java|android-studio|jdk|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29163" PostTypeId="2" ParentId="29162" CreationDate="2021-11-16T12:14:47.317" Score="0" Body="&lt;p&gt;Looks like the “headless” version of OpenJDK was installed. You should be able to resolve it like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install openjdk-11-jdk&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once installed, be sure the correct alternative is selected with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-alternatives --config java &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-11-16T12:14:47.317" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29165" PostTypeId="1" CreationDate="2021-11-17T02:50:08.867" Score="2" ViewCount="197" Body="&lt;p&gt;Just switched back to eOS to try eOS6, I've done two installs, and both times upon upgrading to the latest update, the Compress and Extract options are missing from right-click. Even double clicking on a zip file shows no apps that can decompress.&lt;/p&gt;&#xA;&lt;p&gt;Tried re-installing file-roller, but that doesn't seem to integrated into the right-click menu, although I can now extract and compress manually using file-roller.&lt;/p&gt;&#xA;&lt;p&gt;I suspect it is the latest update to Files. Has anything one encountered this, is there a fix currently?&lt;/p&gt;&#xA;" OwnerUserId="27460" LastActivityDate="2022-03-20T21:42:05.763" Title="Compress and Extract options missing from Files with latest update" Tags="|files|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29166" PostTypeId="2" ParentId="29165" CreationDate="2021-11-17T06:26:38.230" Score="4" Body="&lt;p&gt;Managed to solve this. It seems this issue affects those who update via the terminal.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall org.gnome.fileroller&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27461" LastEditorUserId="25612" LastEditDate="2022-03-20T21:42:05.763" LastActivityDate="2022-03-20T21:42:05.763" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29168" PostTypeId="1" CreationDate="2021-11-18T06:04:29.723" Score="1" ViewCount="65" Body="&lt;p&gt;I'd like wingpanel to be a light blue when light mode is enabled and a dark blue when dark mode is enabled.  I tried using different colors in ~/.config/gtk-3.0/gtk.css and ~/.config/gtk-3.0/gtk-dark.css, but wingpanel's color only honors the color in gtk.css and wingpanel's color doesn't change when switching modes.  Is this possible?  If so, how?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~/.config/gtk-3.0/gtk.css&#xA;.panel {&#xA;      background-color: #7393B3; /* Light Blue */&#xA;}&#xA;.panel.maximized {&#xA;      background-color: #7393B3; /* Light Blue */&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;~/.config/gtk-3.0/gtk-dark.css&#xA;.panel {&#xA;      background-color: #0059B3; /* Dark Blue */&#xA;}&#xA;.panel.maximized {&#xA;      background-color: #0059B3; /* Dark Blue */&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25320" LastEditorUserId="25320" LastEditDate="2021-11-18T06:36:07.567" LastActivityDate="2021-11-18T06:36:07.567" Title="Is there a way to have wingpanel change to a different color when dark mode is enabled?" Tags="|wingpanel|gtk|color|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29170" PostTypeId="1" CreationDate="2021-11-18T12:12:24.077" Score="0" ViewCount="28" Body="&lt;p&gt;Does the trash docklet has a dragdrop functionality?&#xA;Also the language of the Trash docklet stays in English and doesn't change to Dutch in my case.&lt;/p&gt;&#xA;" OwnerUserId="27464" LastActivityDate="2024-04-07T01:08:36.090" Title="Dragdrop Trash Can" Tags="|pantheon-files|language|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29171" PostTypeId="2" ParentId="28628" CreationDate="2021-11-18T13:28:26.047" Score="0" Body="&lt;p&gt;Thank you for your work. I wouldn't have figured it out without it.&lt;/p&gt;&#xA;&lt;p&gt;I am running Elementary 6 Odin on the following system: Intel  i7-7700K , 64-bit system, 16GB Ram, Nvidia GTX 1060 6GB (470 driver)&lt;/p&gt;&#xA;&lt;p&gt;My only suggestion is that the process can be simplified, and it is what worked for me a the time of writing, to the following commands:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg --add-architecture i386&#xA;sudo apt update&#xA;sudo apt install steam libatk-adaptor:i386 libgail-common:i386&#xA;sudo apt install libnvidia-gl-(your driver version here):i386&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Note for all with this problem: It is possible to install Steam through Flathub, yet due to restrictions of Flatpak (mainly File System access) it is better to install the package through APT, which requires some extra steps, in this case is allowing the installation of x86 architecture packages and installation of missing dependencies.&lt;/p&gt;&#xA;&lt;p&gt;Extra note: if you are running Open Source Drivers (MESA), you shouldn't install the libnvidia, instead install the following packages (&lt;a href=&quot;https://stackoverflow.com/questions/40092796/libgl-error-failed-to-load-driver-swrast-running-ubuntu-docker-container-on&quot;&gt;information taken from here&lt;/a&gt;):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install mesa-utils libgl1-mesa-glx&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="17450" LastEditorUserId="17450" LastEditDate="2021-11-18T13:34:06.840" LastActivityDate="2021-11-18T13:34:06.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29172" PostTypeId="2" ParentId="29170" CreationDate="2021-11-18T18:26:57.010" Score="0" Body="&lt;p&gt;Yes, but it is hard to find a use for it since there is no desktop from which to drag file items in elementary.  You can drag file items from Files but that is pointless as it has its own Trash icon and also results in no &amp;quot;Undo&amp;quot; action.  The same goes for dragging items out of e.g. Photos or Music - I am not sure what it does to the databases of those apps and there is no way of undoing the action except by opening Files, finding the items in the trash and restoring them manually.&lt;/p&gt;&#xA;&lt;p&gt;The docklet is now intended mainly for seeing how much is in the bin, seeing what was recently trashed, opening the trash and emptying the trash.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2021-11-18T18:26:57.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29174" PostTypeId="2" ParentId="25353" CreationDate="2021-11-19T12:42:13.703" Score="1" Body="&lt;p&gt;With the latest version of elementaryOS 6, this reappeared for me, and the solution above didn't work; what did work was the following one: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29165/compress-and-extract-options-missing-from-files-with-latest-update&quot;&gt;Compress and Extract options missing from Files with latest update&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt install --reinstall org.gnome.fileroller&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="177" LastActivityDate="2021-11-19T12:42:13.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29175" PostTypeId="1" CreationDate="2021-11-19T14:04:59.467" Score="0" ViewCount="39" Body="&lt;p&gt;Hello I have a problem in Virtual Box when i try to run a vm i got this meassage&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rX4DM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rX4DM.png&quot; alt=&quot;This image contain the error that I got&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;also Secure boot is off and virtualization is enabled&lt;/p&gt;&#xA;&lt;p&gt;OS : Elementary OS 6&lt;/p&gt;&#xA;" OwnerUserId="27472" LastEditorUserId="27472" LastEditDate="2021-11-19T14:17:52.553" LastActivityDate="2023-12-10T00:02:10.290" Title="Virtual Box VM not working" Tags="|release-odin|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29176" PostTypeId="2" ParentId="29175" CreationDate="2021-11-19T14:31:31.370" Score="0" Body="&lt;p&gt;I found the answer in this link:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/920689/how-to-fix-modprobe-vboxdrv-error-in-virtualbox&quot;&gt;https://askubuntu.com/questions/920689/how-to-fix-modprobe-vboxdrv-error-in-virtualbox&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and my problem is fixed&lt;/p&gt;&#xA;" OwnerUserId="27472" LastActivityDate="2021-11-19T14:31:31.370" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29180" PostTypeId="1" CreationDate="2021-11-20T14:35:20.323" Score="0" ViewCount="97" Body="&lt;p&gt;I installed the system on Mac Pro, everything works fine except that the wireless card is not recognized. I tried the &lt;code&gt;sudo pantheon-files&lt;/code&gt; command and it doesn't work, how can I fix it?&lt;/p&gt;&#xA;&lt;p&gt;The controller is Broadcom BCM 4360 (re v.03)&lt;/p&gt;&#xA;&lt;p&gt;Thank you,&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Original (Spanish):&lt;/p&gt;&#xA;&lt;p&gt;Instalé el sistema en Mac Pro funciona todo bien excepto que no recose la placa de wifi. Probé con el comando sudo pantheon-files y no funciona, ¿cómo lo puedo solucionar? El contralor es Broadcom BCM 4360 (re v.03) Gracias&lt;/p&gt;&#xA;" OwnerUserId="27473" LastEditorUserId="25612" LastEditDate="2021-12-12T09:12:49.073" LastActivityDate="2024-01-01T18:08:51.107" Title="No funciona WiFi" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29181" PostTypeId="2" ParentId="29180" CreationDate="2021-11-21T04:31:15.043" Score="0" Body="&lt;p&gt;Tal vez:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Conecta a internet por cable ethernet o por bluetooth&lt;/li&gt;&#xA;&lt;li&gt;En AppCenter, instala bcmwl-kernel-source&lt;/li&gt;&#xA;&lt;li&gt;Reinicia la computadora&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Tengo Mac Pro con otro contralor BCM 43xx y esto funciono para mi.&lt;/p&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2021-11-21T04:31:15.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29182" PostTypeId="2" ParentId="29147" CreationDate="2021-11-21T09:39:30.650" Score="0" Body="&lt;p&gt;Yes, using &amp;quot;Multitasking View&amp;quot; solves my issue.&lt;/p&gt;&#xA;&lt;p&gt;Will have to get used to it :-)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-11-21T09:39:30.650" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29184" PostTypeId="1" AcceptedAnswerId="29185" CreationDate="2021-11-21T20:02:07.853" Score="0" ViewCount="612" Body="&lt;p&gt;I'm looking for a way to add a virtual monitor. I'm using EOS6&lt;/p&gt;&#xA;&lt;p&gt;Virtual monitor as in a fake monitor that acts like a real one connected through HDMI/DP/USB. The aim is to run a full screen slideshow on it and present it to my class.&lt;/p&gt;&#xA;" OwnerUserId="23568" LastActivityDate="2021-11-22T09:57:26.753" Title="How to add a virtual monitor" Tags="|display|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29185" PostTypeId="2" ParentId="29184" CreationDate="2021-11-22T08:01:12.073" Score="1" Body="&lt;p&gt;As you have integrated graphics on an Intel chip, you can do this:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal (if it's not already open)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Create an Xorg configuration file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/X11/xorg.conf.d/20-intel.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use any editor of your choosing. It does not need to be &lt;code&gt;vi&lt;/code&gt;.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Paste the following into the new file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Section &amp;quot;Device&amp;quot;&#xA;    Identifier &amp;quot;intelgpu0&amp;quot;&#xA;    Driver &amp;quot;intel&amp;quot;&#xA;    Option &amp;quot;VirtualHeads&amp;quot; &amp;quot;1&amp;quot;&#xA;EndSection&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Reboot&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Re-open Terminal and check the output of &lt;code&gt;xrandr&lt;/code&gt;. So long as everything is as expected, you will see a line that says &lt;code&gt;VIRTUAL1 disconnected&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Confirm the name of your current output. It will look something like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;HDMI1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 310mm x 170mm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Use &lt;code&gt;cvt&lt;/code&gt; to set a new &lt;code&gt;Modeline&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;cvt 1920 1080&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Replace &lt;code&gt;1920&lt;/code&gt; and &lt;code&gt;1080&lt;/code&gt; with the resolution that you would like the virtual device to be.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;p&gt;You should see some output that looks like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;1920x1080 59.92 Hz (CVT 0.79M3) hsync: 47.82 kHz; pclk: 63.50 MHz&#xA;Modeline &amp;quot;1920x1080_60.00&amp;quot;   63.50  1920 1072 1176 1328  1080 771 775 798 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set the new mode with the output from Step 6:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ xrandr --newmode &amp;quot;1920x1080_60.00&amp;quot;   63.50  1920 1072 1176 1328  1080 771 775 798 -hsync +vsync&#xA;$ xrandr --addmode VIRTUAL1 1920x1080_60.00&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Set the virtual display as active:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xrandr --output VIRTUAL1 --mode 1920x1080_60.00 --right-of HDMI1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Change &lt;code&gt;HDMI1&lt;/code&gt; to your actual display.&lt;/sup&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;You should now have a virtual monitor positioned to the right of your active display. You can check this by looking at your display settings.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2021-11-22T09:57:26.753" LastActivityDate="2021-11-22T09:57:26.753" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29186" PostTypeId="1" CreationDate="2021-11-22T08:44:00.050" Score="0" ViewCount="29" Body="&lt;p&gt;I've just install elementary Odin on my laptop for the second time. Each time everythings is working well, internet (wifi and ethernet) is working smoothly. But for the second time 24-48h hours after elementary install, I have no more internet :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Wifi is activate and connected&lt;/li&gt;&#xA;&lt;li&gt;Ethernet works&lt;/li&gt;&#xA;&lt;li&gt;but not internet connection when I ping google.com or try to open Firefox, neither when I tried upgrade or update.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I didn't change any network configuration this elementary install. I've tried several possibilities : restart network manager (don't work), re-install elementary (works for some times), and I don't see how to diagnosis this problem. I've checked network manager, hardware configuration and material. Can somebody help me to diagnos and correct my problem ?&lt;/p&gt;&#xA;&lt;p&gt;Cheers&lt;/p&gt;&#xA;" OwnerUserId="27487" LastActivityDate="2023-12-12T16:07:25.857" Title="No internet connection after 24 hours without any network conf modification" Tags="|networking|internet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29187" PostTypeId="2" ParentId="29186" CreationDate="2021-11-22T10:03:49.723" Score="0" Body="&lt;p&gt;Found a solution to my own problem with a friend's help, seems to be a DNS configuration anomaly. Ping 8.8.8.8 works so I had &amp;quot;nameserver 8.8.8.8&amp;quot; in /etc/resolve.conf file and set ipv4 Method to &amp;quot;automatic address only (DHCP)&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;But still, I don't understand why this append and I'm not sure this solution is stable or the best one.&lt;/p&gt;&#xA;&lt;p&gt;Can somebody tell me what would be the more stable and best solution ?&lt;/p&gt;&#xA;" OwnerUserId="27487" LastActivityDate="2021-11-22T10:03:49.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29191" PostTypeId="1" CreationDate="2021-11-23T15:54:53.383" Score="0" ViewCount="60" Body="&lt;p&gt;I have AppCenter installed since I installed my OS6 Odin, today I installed Thunderbird via AppCenter, and now I want to uninstall Thunderbird but... I can't run AppCenter.&#xA;I tried reinstalling, purge, adding &lt;code&gt;repo bionic main&lt;/code&gt; and &lt;code&gt;repo xenial main&lt;/code&gt; to &lt;code&gt;appcenter.list&lt;/code&gt; (it didn't exist, now exists). I think I tried everything found in the internet. I even tried to run AppCenter using terminal to see logs, but I didn't even see the logs, because of a long time of loading, then just stopped a process. Someone have any solution?&lt;/p&gt;&#xA;" OwnerUserId="26272" LastActivityDate="2021-11-23T15:54:53.383" Title="Can't run AppCenter" Tags="|appcenter|odin|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29192" PostTypeId="1" CreationDate="2021-11-24T07:18:15.973" Score="0" ViewCount="302" Body="&lt;p&gt;I installed elementary is today and my wired network was working well, after installing nvidia drivers When I restarted I was not able to connect to my network. And wired and wireless options disappeared.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/2qzOR.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2qzOR.jpg&quot; alt=&quot;see this image&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I am kinda new to Linux please help.&lt;/p&gt;&#xA;" OwnerUserId="27499" LastEditorUserId="27499" LastEditDate="2021-11-25T03:37:43.013" LastActivityDate="2021-11-25T03:37:43.013" Title="No network working in elementary os 6" Tags="|networking|internet|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29197" PostTypeId="1" CreationDate="2021-11-25T03:40:39.800" Score="0" ViewCount="112" Body="&lt;p&gt;I am new to here so forgive me if I ask stupid question. I am coming from macOS and would like to give &amp;quot;darling&amp;quot; a try. Unfortunately, no matter what I try to do, there is always some issue breaking the installation process.&lt;/p&gt;&#xA;&lt;p&gt;The latest message is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;darling-dkms can not access headers at kernel source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;( btw: I don't see build nor source in the given location )&lt;/p&gt;&#xA;&lt;p&gt;Any help will be appreciated.&lt;/p&gt;&#xA;" OwnerUserId="27507" LastEditorUserId="25612" LastEditDate="2021-12-12T09:12:13.003" LastActivityDate="2024-01-01T20:06:20.763" Title="Darling is not installing no matter what ... [ elementary OS 6 Odin ]" Tags="|software-installation|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29198" PostTypeId="2" ParentId="29197" CreationDate="2021-11-25T03:43:32.933" Score="0" Body="&lt;p&gt;If you are installing the application from source, you may need to first install the kernel headers, which will then let you compile against them. You can do this by opening Terminal and typing this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-headers-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You may also need some additional packages installed that can be referenced by the application. Based on &lt;a href=&quot;https://askubuntu.com/a/1360698/1222991&quot;&gt;this AskUbuntu answer&lt;/a&gt;, these are required:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install cmake clang bison flex libfuse-dev libudev-dev pkg-config libc6-dev-i386 \&#xA;     linux-headers-generic gcc-multilib libcairo2-dev libgl1-mesa-dev libglu1-mesa-dev libtiff5-dev \&#xA;     libfreetype6-dev git libelf-dev libxml2-dev libegl1-mesa-dev libfontconfig1-dev libbsd-dev \&#xA;     libxrandr-dev libxcursor-dev libgif-dev libavutil-dev libpulse-dev libavformat-dev libavcodec-dev \&#xA;     libavresample-dev libdbus-1-dev libxkbfile-dev libssl-dev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once installed, you should be able to install the application &lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2021-11-25T04:09:55.233" LastActivityDate="2021-11-25T04:09:55.233" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29199" PostTypeId="1" AcceptedAnswerId="29214" CreationDate="2021-11-25T03:49:10.487" Score="0" ViewCount="27" Body="&lt;p&gt;My issue is very similar to &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28623/black-screen-after-unlock-screen-os-6&quot;&gt;Black screen after unlock screen os 6&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Just locking the screen and unlocking it is not returning to the desktop.&#xA;Here is what I got:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/tsR4l.jpg&quot; alt=&quot;hardware&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;And checking the &lt;code&gt;dmesg&lt;/code&gt; following line caught my attention:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;traps: pool-io.element[34441] trap int3 ip:9fac32u543878 error:0 in ibglig-2.0.so.0.6400.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I fix this issue and get the desktop after unlocking?&lt;/p&gt;&#xA;" OwnerUserId="19702" LastEditorUserId="19702" LastEditDate="2021-11-25T04:10:15.287" LastActivityDate="2021-11-28T04:58:56.377" Title="Elementaryos-6 Locking the screen and unlocking the screen returns to black screen with a cursor" Tags="|black-screen|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29201" PostTypeId="1" CreationDate="2021-11-25T17:44:42.253" Score="0" ViewCount="34" Body="&lt;p&gt;I have desktop artifacts, shadows etc when using apps like Firefox. My graphics system summary is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;description: VGA compatible controller&#xA;product: TU102 [GeForce RTX 2080 Ti Rev. A]&#xA;vendor: NVIDIA Corporation&#xA;physical id: 0&#xA;bus info: pci@0000:65:00.0&#xA;version: a1&#xA;width: 64 bits&#xA;clock: 33MHz&#xA;capabilities: pm msi pciexpress vga_controller bus_master cap_list rom&#xA;configuration: driver=nvidia latency=0&#xA;resources: irq:124 memory:d7000000-d7ffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:b000(size=128) memory:d8000000-d807ffff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Anyone having a solution for this?&lt;/p&gt;&#xA;" OwnerUserId="27383" LastEditorUserId="2629" LastEditDate="2021-12-02T15:36:50.443" LastActivityDate="2021-12-02T15:36:50.443" Title="Desktop artefacts on Odin" Tags="|desktop|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29202" PostTypeId="2" ParentId="29201" CreationDate="2021-11-25T19:57:13.367" Score="1" Body="&lt;p&gt;Many users have those. It's related to GNOME Mutter window manager and apparently not that easy to fix/patch. You can google more about it and/or find just a few issues here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os-patches/issues/80&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os-patches/issues/80&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/gala/issues/605&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/605&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-11-25T19:57:13.367" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29203" PostTypeId="1" CreationDate="2021-11-25T20:00:57.893" Score="1" ViewCount="221" Body="&lt;p&gt;Basically I have a wifi connection set, that I want to remove/erase connection details/credentials. In Gnome settings you have option &lt;em&gt;Forget network&lt;/em&gt;. I couldn't find anything similar in eOS.&lt;/p&gt;&#xA;&lt;p&gt;Also, you can not edit connection settings unless you have connected to the WiFi, that does not make any sense.&lt;/p&gt;&#xA;" OwnerUserId="23595" LastActivityDate="2022-08-23T07:02:20.233" Title="How do you forget a WiFi connection?" Tags="|wifi|networking|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29204" PostTypeId="1" CreationDate="2021-11-26T03:39:54.380" Score="0" ViewCount="43" Body="&lt;p&gt;My first post.&lt;/p&gt;&#xA;&lt;p&gt;I had Elementary os6, dual booting on my laptop with Windows 10.&lt;/p&gt;&#xA;&lt;p&gt;All was great until a Windows 10 update. Now when I switch on my laptop, it just boots up into Windows, there is no option screen (Elementary or Windows).&lt;/p&gt;&#xA;&lt;p&gt;What can I do to fix this?  Thanks&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Thanks the cmd command ran, but on reboot no option to boot into elementary os.&lt;/p&gt;&#xA;&lt;p&gt;I couldn't find a disk utility on my elementary USB disk.&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled elementary again, but over Windows so I have buggered up.&lt;/p&gt;&#xA;&lt;p&gt;Does updating windows often corrupt elementary? Should I have dedicated computers rather than dual boot?&lt;/p&gt;&#xA;" OwnerUserId="27512" LastEditorUserId="3018" LastEditDate="2022-02-07T17:13:13.243" LastActivityDate="2024-02-28T01:04:10.527" Title="Elementary vanished after recent Windows Update" Tags="|boot|system|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29205" PostTypeId="2" ParentId="29204" CreationDate="2021-11-26T04:48:39.120" Score="0" Body="&lt;p&gt;So long as the update has not completely removed your Elementary partitions, you may be able to restore the boot menu like this:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Boot into Windows (if you're not already there)&lt;/li&gt;&#xA;&lt;li&gt;Open &amp;quot;Command Prompt&amp;quot; as administrator&lt;/li&gt;&#xA;&lt;li&gt;Update the boot controller with this:&#xA;&lt;pre&gt;&lt;code&gt;bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If you're not sure whether the Linux partitions still exist, you can look for them in the Disk Management tool, or by booting with an Elementary Live USB stick and using the Disks utility.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-11-26T04:48:39.120" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29206" PostTypeId="2" ParentId="29203" CreationDate="2021-11-26T05:20:15.813" Score="1" Body="&lt;p&gt;How very, very odd. I, too, cannot delete a wireless network from the list with any pointer or keyboard combinations. That said, because Elementary OS is based on Ubuntu, you can do this &amp;quot;the hard way&amp;quot; through the command line:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Switch to the superuser (as you'll need to go into a protected directory)&#xA;&lt;pre&gt;&lt;code&gt;sudo su &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Navigate to the &lt;code&gt;system-connections&lt;/code&gt; directory for Network Manager:&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/NetworkManager/system-connections&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Remove the &lt;code&gt;.nmconnection&lt;/code&gt; records you no longer want&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Hopefully this is something that gets resolved with a future update.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-11-26T05:20:15.813" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29208" PostTypeId="1" CreationDate="2021-11-26T21:22:55.557" Score="1" ViewCount="1339" Body="&lt;p&gt;When I try to connect either my gmail or my school office365 accounts I get the message:&#xA;&amp;quot;IMAP verification failed: You must be working online to complete this operation&amp;quot; so it completely fails to connect.&lt;/p&gt;&#xA;&lt;p&gt;I have confirmed I have wifi and ethernet access working. I am signed into my accounts on my browser. This error does not occur with my personal outlook email.&lt;/p&gt;&#xA;&lt;p&gt;I can connect to both of these accounts without issue in Evolution app, but I would much rather use the Elementary OS mail app and calendar. I thought the mail app in Elementary OS 6 uses the same method as evolution -- so if Evolution can connect, what is causing the issue here?&lt;/p&gt;&#xA;" OwnerUserId="27516" LastActivityDate="2022-06-08T19:06:04.867" Title="Failure To Connect To Online Accounts, Elementary OS 6" Tags="|pantheon-mail|release-odin|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29210" PostTypeId="1" CreationDate="2021-11-27T02:28:17.653" Score="0" ViewCount="47" Body="&lt;p&gt;I recently migrated from Windows 10 to Elementary OS 6 Odin, It has god essentially everything I need for my school work, it's amazing, it's faster than Windows 10, I loved it, unless, it starts freezing randomly whenever I am doing any task that plays audio in it (eg. YouTube, Spotify, Google Meet), if I am not doing something that plays audio in it (like writing this thing), it works pretty fine.&lt;/p&gt;&#xA;&lt;p&gt;I read some other posts saying Ctrl+Alt+F1 and killall in case everything freezes, but it doesn't work, when I try to use the Ctrl+Alt+F1, it gets nowhere. It is frozen and all I can do is do a hard reboot.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions on how I could fix this, I really love the Linux and the Elementary OS experience, but this problem hinders it a lot.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Notes:-&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I am using the proprietary drivers for everything&lt;/li&gt;&#xA;&lt;li&gt;I have the latest version of the OS with all the updates installed&lt;/li&gt;&#xA;&lt;li&gt;Everything else is working fine, except when I play Audio it crashes with nothing working and the only option left is to Hard Reboot&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;My Laptop is an Asus E200HA-FD0005TS 11.6-inch Laptop&#xA;Quad-Core Intel® Atom™ x5-Z8300  CPU @ 1.44GHz&#xA;2GB DDR3 memory (4 GB of swap is also available)&#xA;32GB of EMMC storage dedicated to Elementary OS (No other OS on boot)&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT&lt;/strong&gt;&#xA;I ran the following commands and got these outputs:-&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lshw -c audio&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Got no output&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo lspci&#xA;&#xA;00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 22)  &#xA;&#xA;00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller (rev 22)&#xA;&#xA;00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 22)&#xA;&#xA;00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 22)&#xA;&#xA;00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 22)&#xA;&#xA;00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 22)&#xA;&#xA;00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 22)&#xA;&#xA;01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 30)  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;free -m&#xA;&#xA;               total        used        free      shared  buff/cache   available&#xA;Mem:           1872        1228          84         389         560         108&#xA;Swap:          4095        1150        2944&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;This is with 6 firefox tabs and a terminal window&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="27518" LastEditorUserId="27518" LastEditDate="2021-11-29T11:06:46.273" LastActivityDate="2021-11-29T11:06:46.273" Title="My OS crashes randomly after I start using any application that plays audio" Tags="|sound|release-odin|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29213" PostTypeId="1" CreationDate="2021-11-27T19:42:39.530" Score="0" ViewCount="193" Body="&lt;p&gt;I freshly installed elementary OS. I've tried using invidious in  the default browser and only sound played but there was no video. Tried some other instances and the same problem occured.&lt;/p&gt;&#xA;" OwnerUserId="27522" LastActivityDate="2024-03-22T13:01:25.147" Title="No video only sound, when using invidious" Tags="|web-browser|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29214" PostTypeId="2" ParentId="29199" CreationDate="2021-11-28T04:58:56.377" Score="0" Body="&lt;p&gt;None of the solutions provided worked for me.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/greeter/issues/165&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/greeter/issues/165&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/gala/issues/1126&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/1126&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Taking a backup of my work files and &lt;code&gt;reinstalling&lt;/code&gt; &lt;code&gt;elmentaryos&lt;/code&gt; fixed the issue.&lt;/p&gt;&#xA;" OwnerUserId="19702" LastActivityDate="2021-11-28T04:58:56.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29218" PostTypeId="2" ParentId="18012" CreationDate="2021-11-28T16:36:31.300" Score="0" Body="&lt;p&gt;Was headbutting this problem as well just now. Same deal, just installed Elementary OS and some of the Directories had Blue text on Green background. Although, I seem to have the same issue on my Ubuntu Server which I most often connect to through Putty witch seems to override the colors.&lt;/p&gt;&#xA;&lt;p&gt;I found that the problem lies within bash, or at least a simple solution lies in bash. In your home folder, edit the file &amp;quot;.bashrc&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Add these two lines at the end of the file.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;LS_COLORS='ow=0;40:di=1;36:';&#xA;export LS_COLORS&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then run command &amp;quot;source .bashrc&amp;quot;&#xA;You could also play with the values for 0;40 and 1;36. As I understand it &amp;quot;di=&amp;quot; sets the color for your normal directories, while &amp;quot;ow=&amp;quot; seems to set the colors for directories where non-owners lack write permission.&lt;/p&gt;&#xA;&lt;p&gt;This guide had some useful info on setting the bash-colors.&#xA;&lt;a href=&quot;https://askubuntu.com/questions/466198/how-do-i-change-the-color-for-directories-with-ls-in-the-console&quot;&gt;https://askubuntu.com/questions/466198/how-do-i-change-the-color-for-directories-with-ls-in-the-console&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27527" LastActivityDate="2021-11-28T16:36:31.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29219" PostTypeId="1" CreationDate="2021-11-29T01:01:09.737" Score="0" ViewCount="519" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3GLOQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3GLOQ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Wifi works fine. Stupidly added proton vpn and then uninstalled it now every time the computer is started it shows that the pvpn is on. How to permanently remove it? Please help.&lt;/p&gt;&#xA;" OwnerUserId="27530" LastActivityDate="2023-12-19T12:07:15.873" Title="How to remove proton vpn? Uninstalled it but still has vpn device on and won't let me connect to internet" Tags="|vpn|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29220" PostTypeId="1" CreationDate="2021-11-29T03:25:58.417" Score="1" ViewCount="28" Body="&lt;p&gt;I have an office365 account &amp;amp; gmail account set up -- I set them up by downloading evolution as a .deb, and then adding my accounts there. It was the only way I could find for it then to autosync with the mail account.&lt;/p&gt;&#xA;&lt;p&gt;Both accounts show fine, but only the gmail is in the unified inbox. Somehow the office365 account remains not connected to the unified inbox. I do not see a way to fix/edit this.&lt;/p&gt;&#xA;&lt;p&gt;Is there something I can do differently with the account set up, or is this a bug to hopefully be fixed?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="27516" LastEditorUserId="27516" LastEditDate="2021-12-01T17:27:52.500" LastActivityDate="2021-12-01T17:27:52.500" Title="Unified Inbox Not Working" Tags="|pantheon-mail|release-odin|odin|bugs|eos6|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29221" PostTypeId="2" ParentId="29208" CreationDate="2021-11-29T03:27:34.010" Score="2" Body="&lt;p&gt;Found almost complete work-around is to install evolution through apt-get instead of flatpak -- I can add my accounts through that and it shows up in mail.&lt;/p&gt;&#xA;&lt;p&gt;If you do it through the flatpak evolution, this does not work. Also, unified inbox still fails -- for example, my office365 inbox account is not included in the unified inbox.&lt;/p&gt;&#xA;" OwnerUserId="27516" LastActivityDate="2021-11-29T03:27:34.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29222" PostTypeId="2" ParentId="29219" CreationDate="2021-11-29T07:01:33.810" Score="0" Body="&lt;p&gt;Shouldn't you be able to remove it using Network Manager -&amp;gt; Network properties -&amp;gt; VPN network and remove it from there?&lt;/p&gt;&#xA;&lt;p&gt;Also, check if other networks are automatically using VPN upon connection and disable that setting.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-11-29T07:01:33.810" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29228" PostTypeId="1" AcceptedAnswerId="29233" CreationDate="2021-11-30T14:09:34.443" Score="3" ViewCount="393" Body="&lt;p&gt;A &amp;quot;Failed to update “Operating System Updates”&amp;quot; message is displayed in a pop up and, if I click &amp;quot;Details&amp;quot;, it shows the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;  linux-modules-nvidia-470-5.11.0-40-generic: Depends: nvidia-kernel-common-470 (&amp;lt;= 470.82.00-1) but 470.86-0ubuntu0.20.04.1 is to be installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If I run &lt;code&gt;sudo apt-get update&lt;/code&gt; and then &lt;code&gt;sudo apt-get upgrade&lt;/code&gt; it shows the same message as above. If there is a fix in the works let me know and, if I can fix it myself, I am willing to do so if its not too complicated.&lt;/p&gt;&#xA;" OwnerUserId="27538" LastEditorUserId="25612" LastEditDate="2021-12-12T09:12:17.380" LastActivityDate="2021-12-12T09:12:17.380" Title="Elementary os 6 Odin not updating due to unmet dependency" Tags="|updates|nvidia|dependencies|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29229" PostTypeId="2" ParentId="342" CreationDate="2021-11-30T20:32:02.960" Score="0" Body="&lt;p&gt;In addition to @daGO's answer , at elementary hera i had to tinker with these settings via dconf-editor built-in search functionality to avoid getting the switcher and the whole DE in a freeze&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;desktop-icon-in-switcher off&lt;/li&gt;&#xA;&lt;li&gt;desktop-in-switcher off&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="24570" LastEditorUserId="24570" LastEditDate="2021-12-01T10:06:42.687" LastActivityDate="2021-12-01T10:06:42.687" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29230" PostTypeId="2" ParentId="28769" CreationDate="2021-11-30T20:41:07.290" Score="3" Body="&lt;p&gt;Just press the &lt;kbd&gt;F11&lt;/kbd&gt; key.&lt;/p&gt;&#xA;&lt;p&gt;When &lt;kbd&gt;F11&lt;/kbd&gt; is pressed, the current application will switch to Full Screen mode and be moved to its own workspace. Pressing &lt;kbd&gt;F11&lt;/kbd&gt; again will restore the previous window size.&lt;/p&gt;&#xA;" OwnerUserId="27546" LastEditorUserId="25612" LastEditDate="2021-12-12T09:10:36.270" LastActivityDate="2021-12-12T09:10:36.270" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29232" PostTypeId="2" ParentId="29228" CreationDate="2021-12-01T01:13:01.920" Score="2" Body="&lt;p&gt;You may be able to resolve this by re-installing the common libraries for the Nvidia driver.&lt;/p&gt;&#xA;&lt;p&gt;From a Terminal, run this command to re-install the common libraries:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt --reinstall install libnvidia-common-470&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then ensure you have the proper hardware drivers installed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-01T01:13:01.920" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29233" PostTypeId="2" ParentId="29228" CreationDate="2021-12-01T03:56:48.377" Score="1" Body="&lt;p&gt;So to solve my issue, i removed the nvidia 470 driver through app center by the following way:&#xA;open appcenter-&amp;gt;clicking the installed tab-&amp;gt;then by selecting nvidia-driver-470-&amp;gt; click uninstall-&amp;gt; reboot system.&#xA;then after reboot:&#xA;open appcenter-&amp;gt;go to installed tab-&amp;gt;wait for the updates to show up-&amp;gt;update all-&amp;gt;open terminal-&amp;gt;paste this command (without quotes) &amp;quot;sudo ubuntu-drivers autoinstall&amp;quot;-&amp;gt;when this command is finished rebooted my system.  now my system is running normally, i even got some new update that got installed without any issues.  so it seems like the problem is solved.&lt;/p&gt;&#xA;&lt;p&gt;matigo gave an answer which i used to solve the installation of the driver through command line.  sadly due to me not having enough reputation, i cant upvote his answer.&lt;/p&gt;&#xA;" OwnerUserId="27538" LastActivityDate="2021-12-01T03:56:48.377" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29235" PostTypeId="1" CreationDate="2021-12-01T16:14:04.627" Score="0" ViewCount="34" Body="&lt;p&gt;The animation of the multitasking mode and window switching on the integrated INTEL graphics is terribly slow. Everything is fine on the external NVIDIA card, but I need Intel&lt;/p&gt;&#xA;" OwnerUserId="27180" LastActivityDate="2021-12-01T16:14:04.627" Title="Task switcher lags animation" Tags="|eos6|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29236" PostTypeId="1" AcceptedAnswerId="29250" CreationDate="2021-12-01T16:28:00.620" Score="0" ViewCount="57" Body="&lt;p&gt;I have a box I use for pro linux audio only. For work, I use arch linux, but for the audio box, I want and need a stable system where I can focus on the audio and not the system, and also doesn't threaten my stability due to frequent updates.&lt;/p&gt;&#xA;&lt;p&gt;That's why, some years ago, I installed elementary os 5.1 there. Beautiful, fast, easy and gets out of the way for the tasks I run that box for. I was always happy with it.&lt;/p&gt;&#xA;&lt;p&gt;Until I recently bought a linux-supported audio software from u-he which only runs with glibc 2.28. While 5.1 runs with 2.27 only. And there is no upgrade path, not for those libs, nor the OS itself (e.g. from 5.1 to 6).&lt;/p&gt;&#xA;&lt;p&gt;Now I have to reluctantly update the whole system. This is huge. I'll need to backup everything (which I do regularly but still, you know what this implies), and re-install a new OS from scratch.&lt;/p&gt;&#xA;&lt;p&gt;I am of course considering elementary OS 6 again. However, I would like to avoid this same issue.&lt;/p&gt;&#xA;&lt;p&gt;Will there be an upgrade path from 6. to 6.x and eventually 7 or whatever comes after? This will be important for me to take the right decision here.&lt;/p&gt;&#xA;" OwnerUserId="27550" LastActivityDate="2021-12-03T10:10:19.553" Title="Will Odin 6 be updateable?" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29237" PostTypeId="1" CreationDate="2021-12-01T20:21:44.120" Score="1" ViewCount="32" Body="&lt;p&gt;I can't remember what I did .. I need a new, minimalistic switcher (Alt+Tab)&lt;/p&gt;&#xA;" OwnerUserId="27180" LastActivityDate="2021-12-02T15:33:13.593" Title="I changed something and I got my old switcher back. How to return a new one?" Tags="|eos6|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29238" PostTypeId="2" ParentId="11844" CreationDate="2021-12-02T12:10:21.670" Score="0" Body="&lt;p&gt;Docker doesnt have specific install help page for elementary os , since its based on ubuntu follow this &lt;a href=&quot;https://docs.docker.com/engine/install/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.docker.com/engine/install/ubuntu/&lt;/a&gt; and &lt;strong&gt;Please use (lsb_release -ucs) instead of (lsb_release -cs)&lt;/strong&gt; while adding docker repository in elementary OS&lt;/p&gt;&#xA;" OwnerUserId="27552" LastActivityDate="2021-12-02T12:10:21.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29239" PostTypeId="1" CreationDate="2021-12-02T13:00:40.277" Score="1" ViewCount="1781" Body="&lt;p&gt;No sound, no speakers and no microphone in sound settings. I see Dummy Output in the pavucontrol. I tried the options &lt;code&gt;snd-intel-dspcfg dsp_driver=1&lt;/code&gt; in alsa-base.conf and BOOT_CMD in GRUB, it didn't help.&lt;/p&gt;&#xA;&lt;p&gt;I use /usr/share/alsa-base/alsa-info.sh script for get more diagnoctic information. &lt;a href=&quot;https://alsa-project.org/db/?f=bdc7d9a6cbf5db1d5727600671256196edf8dc7f&quot; rel=&quot;nofollow noreferrer&quot;&gt;Result&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;System:    Host: slayki1405 Kernel: 5.11.0-41-generic x86_64 bits: 64 Desktop: Pantheon &#xA;           Distro: elementary OS 6 Odin &#xA;Machine:   Type: Laptop System: ALLDOCUBE product: i1405 v: N/A serial: &amp;lt;superuser/root required&amp;gt; &#xA;           Mobo: ALLDOCUBE model: ALLDOCUBE serial: &amp;lt;superuser/root required&amp;gt; &#xA;           UEFI: American Megatrends LLC. v: Z362D.ES8336.2103034.06 date: 05/20/2021 &#xA;Audio:     Device-1: Intel driver: snd_hda_intel &#xA;           Sound Server: ALSA v: k5.11.0-41-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;lspci -v | grep -A7 -i &amp;quot;audio&amp;quot;&#xA;00:1f.3 Multimedia audio controller: Intel Corporation Device 4dc8 (rev 01)&#xA;    DeviceName: Onboard - Sound&#xA;    Subsystem: Realtek Semiconductor Co., Ltd. Device 1242&#xA;    Flags: bus master, fast devsel, latency 32, IRQ 133&#xA;    Memory at 6001120000 (64-bit, non-prefetchable) [size=16K]&#xA;    Memory at 6001000000 (64-bit, non-prefetchable) [size=1M]&#xA;    Capabilities: &amp;lt;access denied&amp;gt;&#xA;    Kernel driver in use: snd_hda_intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;aplay -l&#xA;**** Список PLAYBACK устройств ****&#xA;карта 0: PCH [HDA Intel PCH], устройство 3: HDMI 0 [HDMI 0]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 7: HDMI 1 [HDMI 1]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 8: HDMI 2 [HDMI 2]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 9: HDMI 3 [HDMI 3]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 10: HDMI 4 [HDMI 4]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 11: HDMI 5 [HDMI 5]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;карта 0: PCH [HDA Intel PCH], устройство 12: HDMI 6 [HDMI 6]&#xA;  Подустройства: 1/1&#xA;  Подустройство №0: subdevice #0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dmesg | grep -C1 -E 'ALSA|HDA|snd|DSP|audio'&#xA;[    0.000000] Linux version 5.11.0-41-generic (buildd@lgw01-amd64-005) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #45~20.04.1-Ubuntu SMP Wed Nov 10 10:20:10 UTC 2021 (Ubuntu 5.11.0-41.45~20.04.1-generic 5.11.22)&#xA;[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-41-generic root=/dev/mapper/data-root ro quiet splash snd-intel-dspcfg.dsp_driver=1 vt.handoff=7&#xA;[    0.000000] KERNEL supported cpus:&#xA;--&#xA;[    0.050392] Policy zone: Normal&#xA;[    0.050394] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-41-generic root=/dev/mapper/data-root ro quiet splash snd-intel-dspcfg.dsp_driver=1 vt.handoff=7&#xA;[    0.052209] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)&#xA;--&#xA;[    3.332452] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])&#xA;[    3.376815] snd_hda_intel 0000:00:1f.3: enabling device (0000 -&amp;gt; 0002)&#xA;[    3.377242] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])&#xA;[    3.403394] iwlwifi 0000:00:14.3: base HW address: f8:5e:a0:2d:c0:3f&#xA;[    3.412669] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13&#xA;[    3.412722] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14&#xA;[    3.412767] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15&#xA;[    3.412810] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16&#xA;[    3.412868] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17&#xA;[    3.412915] input: HDA Intel PCH HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18&#xA;[    3.412955] input: HDA Intel PCH HDMI/DP,pcm=12 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19&#xA;[    3.415753] thermal thermal_zone7: failed to read out thermal zone (-61)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27553" LastEditorUserId="27553" LastEditDate="2021-12-04T12:53:52.163" LastActivityDate="2022-10-26T13:13:00.723" Title="Dummy Output on Intel Jasper Lake N5100" Tags="|sound|audio|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29240" PostTypeId="1" AcceptedAnswerId="29241" CreationDate="2021-12-02T14:21:43.063" Score="0" ViewCount="430" Body="&lt;p&gt;I'm trying to install Bitwig Studio 4.1 which comes as a .deb package. I'm using Eddy, and it's giving me this error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The following packages have unmet dependencies:&#xA;  bitwig-studio: Depends: zlib1g:i386 but it is not installable&#xA;                 Depends: libx11-xcb1:i386 but it is not installable&#xA;                 Depends: libx11-6:i386 but it is not installable&#xA;                 Depends: libxau6:i386 but it is not installable&#xA;                 Depends: libxdmcp6:i386 but it is not installable&#xA;                 Depends: libxrender1:i386 but it is not installable&#xA;                 Depends: libfontconfig1:i386 but it is not installable&#xA;                 Depends: libxcb-icccm4:i386 but it is not installable&#xA;                 Depends: libxcb-util1:i386 but it is not installable&#xA;                 Depends: libxcb-shm0:i386 but it is not installable&#xA;                 Depends: libxcb-xinput0:i386 but it is not installable&#xA;                 Depends: libxkbcommon0:i386 but it is not installable&#xA;                 Depends: libxkbcommon-x11-0:i386 but it is not installable&#xA;                 Depends: libpixman-1-0:i386 but it is not installable&#xA;                 Depends: libcairo2:i386 but it is not installable&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I install Bitwig? :)&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-06T12:18:13.273" Title="Installing Bitwig Studio .deb &quot;but it is not installable&quot;" Tags="|software-installation|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29241" PostTypeId="2" ParentId="29240" CreationDate="2021-12-02T15:14:16.323" Score="1" Body="&lt;p&gt;It appears that BitWig Studio is looking for very old 32bit packages which are no longer available in the default Ubuntu repositories. Doing a quick search it looks like several of these packages are available in 64bit so its not that they're completely unsupported.&lt;/p&gt;&#xA;&lt;p&gt;I would look to see if Bitwig has any support for what to do about 32bit packages not being available.&lt;/p&gt;&#xA;" OwnerUserId="27555" LastActivityDate="2021-12-02T15:14:16.323" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29242" PostTypeId="2" ParentId="29237" CreationDate="2021-12-02T15:33:13.593" Score="1" Body="&lt;p&gt;The new Alt + Tab functionality is from Gala. If you can't remember what you did you could always reinstall Gala and that might help. From the terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt reinstall gala&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Whats going on here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo&lt;/code&gt; only someone with admin access can directly install/remove/reinstall software. This will ask for your admin password.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; apt is the underlying software that Ubuntu and by extension elementary use for managing system software packages.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;reinstall&lt;/code&gt; This command tells apt that we want to reinstall something thats already on our computer&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gala&lt;/code&gt; The name of the package that we want to reinstall.&lt;/p&gt;&#xA;&lt;p&gt;So to break it down we are telling the computer: Ask for admin access for the package manager apt, and then in apt we want to reinstall the package gala.&lt;/p&gt;&#xA;" OwnerUserId="27555" LastActivityDate="2021-12-02T15:33:13.593" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29243" PostTypeId="2" ParentId="22598" CreationDate="2021-12-02T16:59:35.397" Score="0" Body="&lt;p&gt;Hold ⌘ (super key) and click and drag on the window to move it. This way you can get to the bottom of the window.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-02T16:59:35.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29244" PostTypeId="1" CreationDate="2021-12-02T17:59:52.493" Score="0" ViewCount="73" Body="&lt;p&gt;I am using Elementary OS 6.&#xA;When I lock (WIN+L), it locks well and after a while, the lock screen get freezed.&#xA;It is not possible to input the password.&#xA;Yours&lt;/p&gt;&#xA;&lt;p&gt;My PC Hardware : it is a ZBOX-IQ01-PLUS BE&lt;/p&gt;&#xA;&lt;p&gt;if you want more: &lt;a href=&quot;https://pastebin.com/9tt8gZ7t&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/9tt8gZ7t&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;My syslog :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Dec  4 09:56:52 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:52 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:52 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:52 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:52 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:57 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:57 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:57 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:57 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:56:57 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:02 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:02 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:02 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:02 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:02 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:07 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:07 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:07 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:07 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:07 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:12 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:12 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:12 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:12 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:12 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:13 ZBOXID92ZBOXIQ012691b898 gsd-color[1508]: failed to set screen _ICC_PROFILE: L’ouverture du fichier « /var/lib/lightdm/.local/share/icc/edid-1a22a3e94c53ede7c5c8ae97c02c4885.icc » a échoué : Permission non accordée&#xA;Dec  4 09:57:17 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:17 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_n_pages: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:17 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_position: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:17 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_get_nth_child: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;Dec  4 09:57:17 ZBOXID92ZBOXIQ012691b898 io.elementary.a[2144]: hdy_carousel_box_scroll_to: assertion 'HDY_IS_CAROUSEL_BOX (self)' failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you want to see more : &lt;a href=&quot;https://pastebin.com/4Dwat7fz&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/4Dwat7fz&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27556" LastEditorUserId="27556" LastEditDate="2021-12-09T18:47:38.947" LastActivityDate="2023-12-29T22:02:00.253" Title="Elementary freezes after locking screen / Elementary 6.0 (PARTIALLY FIXED)" Tags="|odin|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29245" PostTypeId="1" AcceptedAnswerId="29248" CreationDate="2021-12-02T19:29:17.447" Score="0" ViewCount="63" Body="&lt;p&gt;RESOLVED!!  Sorry I'm so new that I don't know how to mark an issue resolved, but matigo's answer definitely resolved my issue.  This is no longer a question now that matigo has stepped in, so it is completely resolved and needs to be marked that way, if a mod reads this and cares to, for everyone else's sake.  Thanks!&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I'm still a new eOS user.  I've had to reinstall a couple of times for various reasons, and I remember in the past I found a way to do this, but this time I can't and I was hoping for your help.&lt;/p&gt;&#xA;&lt;p&gt;When I choose Shutdown from the power button on the right side of the panel, I want it to reboot immediately without asking any questions, like &amp;quot;Are you sure you want to.&amp;quot;  :)  I used to have it doing that, but this time I can't find a way to get it setup right.  It would do just that: I chose Shutdown and the system immediately reboots - not shuts down, reboots.&lt;/p&gt;&#xA;&lt;p&gt;That's perfect for me because I leave my machine on all the time and I have a Windows partition that I reboot to a few times a day.  Beyond that, I'm currently making a lot of system changes and that means I'm constantly rebooting to make whatever change I'm working on take effect.&lt;/p&gt;&#xA;&lt;p&gt;I &lt;em&gt;could&lt;/em&gt; use like a script that has an icon on my Plank for that, but I'd prefer not to as my Plank is already kinda full.   :)   So yes, I'm fully aware of &lt;em&gt;shutdown -r now&lt;/em&gt; but I don't want to implement that - I'd rather stick with the Panel since it's already in place and I have done this before - recently, on eOS 6 Odin.  I'm thinking I might have somehow installed Elementary Tweaks on my first try, and maybe it was included in there.  I now have Pantheon Tweaks (like I'm supposed to) but I don't see an option in there for that, or anywhere else in the system's configuration.&lt;/p&gt;&#xA;&lt;p&gt;Oh, and yes, I have googled this to death, for Pantheon, elementary OS, and Ubuntu.  I just can't find a way to do it again.&lt;/p&gt;&#xA;&lt;p&gt;Your assistance and guidance are immeasurable and greatly appreciated.  I'm keeping a record of everything I do to the system now, so it won't go unforgotten.  Thank you for your time and attention.&lt;/p&gt;&#xA;" OwnerUserId="27382" LastEditorUserId="27382" LastEditDate="2021-12-03T05:11:09.323" LastActivityDate="2021-12-03T05:11:09.323" Title="RESOLVED! trying to change shutdown option to immediately shut down" Tags="|pantheon|shutdown|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29248" PostTypeId="2" ParentId="29245" CreationDate="2021-12-03T02:05:44.887" Score="0" Body="&lt;p&gt;You can disable the confirmation dialog by typing this into Terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.SessionManager logout-prompt false&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Interestingly, after doing this on my Elementary OS 6 installation, the machine will reboot instead of shutting down. So this may kill two birds with the same stone for you.&lt;/p&gt;&#xA;&lt;p&gt;If you would like to revert the change, you can restore the original setting by changing &lt;code&gt;false&lt;/code&gt; to &lt;code&gt;true&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;gsettings set org.gnome.SessionManager logout-prompt true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-03T02:05:44.887" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29249" PostTypeId="2" ParentId="29239" CreationDate="2021-12-03T02:20:32.360" Score="0" Body="&lt;p&gt;There are a few things that you will need to check:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Are the dependencies correct?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;modprobe --show-depends snd_hda_intel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So long as everything is installed, you should see something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;insmod /lib/modules/5.11.0-36-generic/kernel/sound/soundcore.ko &#xA;install /sbin/modprobe --ignore-install snd $CMDLINE_OPTS &amp;amp;&amp;amp; { /sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet --use-blacklist snd-seq ; } &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/core/snd-timer.ko &#xA;install /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS &amp;amp;&amp;amp; { /sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; } &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/core/snd-pcm-dmaengine.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/ac97_bus.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/core/snd-compress.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/soc/snd-soc-core.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/drivers/soundwire/soundwire-bus.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/core/snd-hwdep.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/hda/snd-hda-core.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/pci/hda/snd-hda-codec.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/drivers/soundwire/soundwire-cadence.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/drivers/soundwire/soundwire-generic-allocation.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/drivers/soundwire/soundwire-intel.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/hda/snd-intel-dspcfg.ko &#xA;insmod /lib/modules/5.11.0-36-generic/kernel/sound/pci/hda/snd-hda-intel.ko &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you see just a few &lt;code&gt;.ko&lt;/code&gt; references, then you may need to determine which drivers are required for your audio device and &lt;code&gt;apt install&lt;/code&gt; them individually.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Does the kernel module exist?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;find /lib/modules/$(uname -r)/kernel/sound -name snd-hda-intel.ko&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If it does, you'll see something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/lib/modules/5.11.0-36-generic/kernel/sound/pci/hda/snd-hda-intel.ko&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If the kernel is missing, you may be able to install it like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install linux-modules-extra-$(uname -r)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Hopefully this will give you what you need for the sound to be restored &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-03T02:20:32.360" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29250" PostTypeId="2" ParentId="29236" CreationDate="2021-12-03T10:10:19.553" Score="0" Body="&lt;p&gt;No, it will not. The authors of elementary os have the fear, that the update will eventuelly break the system and the user then say it is the fault of elementary and not debian. You will to have reinstall it again.&lt;/p&gt;&#xA;&lt;p&gt;By the way, why not try fedora for audio? It has pipewire as default audio system activated, thats a huge advantage, as debian / ubuntu / elementary use alsa / pulseaudio. Pipewire runs really smooth, you can do many things (like routing your streams) and it has a much lower latency.&lt;/p&gt;&#xA;" OwnerUserId="27561" LastActivityDate="2021-12-03T10:10:19.553" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29252" PostTypeId="1" CreationDate="2021-12-04T06:12:50.893" Score="0" ViewCount="33" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/AD4Un.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AD4Un.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;Every time when I click shutdown or restart on elementary os 6 , some kind of text shows and the system freeze . It happens every time during the shutdown or restart process. Because of this I cannot properly shutdown the system , I have to long press the power button or to cut the power. I have attached image of the text shown during freeze in shut down process with this. Now I have switched my OS from elementary OS to kubuntu which works perfect. I have already filed issue in Github. I'm using a Dell 5559 laptop.&lt;/p&gt;&#xA;" OwnerUserId="27567" LastActivityDate="2021-12-04T06:12:50.893" Title="I Cannot shutdown or restart the system properly in elementary os 6" Tags="|shutdown|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29254" PostTypeId="2" ParentId="28146" CreationDate="2021-12-05T19:06:52.603" Score="0" Body="&lt;p&gt;So type &amp;quot;ldd --version&amp;quot; and this will tell you what version of glibc you have. Prob. 2.32..   Then change directory into the cyberghost install folder and &amp;quot;sudo nano install.sh&amp;quot;   go down to the kali versions and change 2.31 to 2.32.   hit ctrl+x, enter, enter..   then relaunch the install file.. &amp;quot;sudo bash install.sh&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="27572" LastActivityDate="2021-12-05T19:06:52.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29256" PostTypeId="1" CreationDate="2021-12-05T21:06:56.143" Score="0" ViewCount="127" Body="&lt;p&gt;I am giving elementary a new try and I cannot find a setting for tiling windows to the corners (splitting the left or right tile), not even to upper and bottom half of the screen (thus split the screen up/down).&lt;/p&gt;&#xA;&lt;p&gt;Just right and left tile are present in settings:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZxVrs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZxVrs.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There are some options in &lt;code&gt;dconf&lt;/code&gt; / &lt;code&gt;gsettings&lt;/code&gt; present, but they are not followed:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xMewC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xMewC.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;That list in dconf looks odd. Dconf reflects some keybindings for windows set in System Settings &amp;gt; Keyboard &amp;gt; Windows (e.g. for minimize) but doesn't reflect others.&lt;/p&gt;&#xA;&lt;p&gt;This is so trivial in other desktops, is it really absent?&lt;/p&gt;&#xA;" OwnerUserId="18449" LastEditorUserId="18449" LastEditDate="2021-12-06T10:08:10.317" LastActivityDate="2023-12-26T16:05:55.673" Title="Is it possible to tile windows more than just left and right?" Tags="|release-odin|gala|odin|window-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29257" PostTypeId="1" CreationDate="2021-12-05T22:45:09.450" Score="0" ViewCount="787" Body="&lt;p&gt;I am trying to add my school email address to Elementary OS 6, and I can't get it to configure.  I've tried the Microsoft settings for Outlook (&lt;a href=&quot;https://support.microsoft.com/en-us/office/pop-imap-and-smtp-settings-8361e398-8af4-4e97-b147-6c6c4ac95353&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.microsoft.com/en-us/office/pop-imap-and-smtp-settings-8361e398-8af4-4e97-b147-6c6c4ac95353&lt;/a&gt;), but that doesn't log me in.  When I log in at Outlook.com on Firefox, it takes me to a page from my school, and then I log in there, and then I can access my email through the browser.  Any thoughts on how to get this working in the Elementary OS Mail app?&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;" OwnerUserId="27114" LastActivityDate="2024-01-25T19:08:46.053" Title="How do I add my Outlook School Email Account to Elementary OS?" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29258" PostTypeId="2" ParentId="29257" CreationDate="2021-12-06T07:22:05.943" Score="0" Body="&lt;p&gt;This will be different for many universities, so you may have to double check this with the technical support staff where you study. Based on what you've said, it sounds as though there is some SSO authentication required. Here are the IMAP settings that &lt;em&gt;generally&lt;/em&gt; work for situations like this:&lt;/p&gt;&#xA;&lt;p&gt;Incoming IMAP:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt;Setting&lt;/th&gt;&#xA;&lt;th&gt;Value&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Server hostname&lt;/td&gt;&#xA;&lt;td&gt;&lt;code&gt;outlook.office365.com&lt;/code&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Port&lt;/td&gt;&#xA;&lt;td&gt;&lt;code&gt;993&lt;/code&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;SSL&lt;/td&gt;&#xA;&lt;td&gt;SSL/TLS&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Authentication&lt;/td&gt;&#xA;&lt;td&gt;Oauth2&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;Outgoing IMAP:&lt;/p&gt;&#xA;&lt;div class=&quot;s-table-container&quot;&gt;&#xA;&lt;table class=&quot;s-table&quot;&gt;&#xA;&lt;thead&gt;&#xA;&lt;tr&gt;&#xA;&lt;th style=&quot;text-align: right;&quot;&gt;Setting&lt;/th&gt;&#xA;&lt;th&gt;Value&lt;/th&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/thead&gt;&#xA;&lt;tbody&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Server hostname&lt;/td&gt;&#xA;&lt;td&gt;&lt;code&gt;smtp.office365.com&lt;/code&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Port&lt;/td&gt;&#xA;&lt;td&gt;&lt;code&gt;587&lt;/code&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;SSL&lt;/td&gt;&#xA;&lt;td&gt;&lt;code&gt;STARTTLS&lt;/code&gt;&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;tr&gt;&#xA;&lt;td style=&quot;text-align: right;&quot;&gt;Authentication&lt;/td&gt;&#xA;&lt;td&gt;Oauth2&lt;/td&gt;&#xA;&lt;/tr&gt;&#xA;&lt;/tbody&gt;&#xA;&lt;/table&gt;&#xA;&lt;/div&gt;&#xA;&lt;p&gt;The username for both incoming and outgoing will be your email address.&lt;/p&gt;&#xA;&lt;p&gt;Once this is configured, the system will try to connect to the server. Because the Authentication is &lt;code&gt;Oauth2&lt;/code&gt;, you will be presented with a login screen where you can enter the username and password for your school.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-06T07:22:05.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29259" PostTypeId="2" ParentId="29256" CreationDate="2021-12-06T11:44:06.470" Score="0" Body="&lt;p&gt;Yes, it really is absent.&lt;/p&gt;&#xA;&lt;p&gt;There is an issue for it on GitHub here: &lt;a href=&quot;https://github.com/elementary/gala/issues/105&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/gala/issues/105&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you have anything to add to the discussion, do that there. Give the original post there a ️ to show that you want this too.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-06T11:44:06.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29261" PostTypeId="1" CreationDate="2021-12-06T15:29:43.857" Score="1" ViewCount="36" Body="&lt;p&gt;I liked that you could set a volume to more than 100% in the Sound settings in the previous versions - it's sometimes useful when you for example play a YouTube video which has rather low volume. Can I have something similar in the Odin release?&lt;/p&gt;&#xA;" OwnerUserId="563" LastActivityDate="2021-12-06T15:29:43.857" Title="Can't set volume to more than 100% in Odin" Tags="|sound|release-odin|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29263" PostTypeId="2" ParentId="28605" CreationDate="2021-12-07T18:16:57.880" Score="0" Body="&lt;p&gt;You can add/change the keyboard layout under Settings -&amp;gt; Keyboard -&amp;gt; + -&amp;gt; type Persian...&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6vcqq.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6vcqq.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If this not solving your issue, can you please tell me more about what are you trying to do?&lt;/p&gt;&#xA;&lt;p&gt;Cheers!&lt;/p&gt;&#xA;" OwnerUserId="17183" LastActivityDate="2021-12-07T18:16:57.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29264" PostTypeId="1" CreationDate="2021-12-07T20:10:26.290" Score="0" ViewCount="44" Body="&lt;p&gt;I would like to know if the latest version of Elementary OS allows to:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;change the Mac address of the computer on each reboot&lt;/li&gt;&#xA;&lt;li&gt;change the Mac address every x minutes&lt;/li&gt;&#xA;&lt;li&gt;hide any folders (and subfolders) and protect their access with a password from a dedicated pack&lt;/li&gt;&#xA;&lt;li&gt;add shortcut on the deskop (such as in windows)&lt;/li&gt;&#xA;&lt;li&gt;ease the process to add a printer from well-known manufacturers (Canon, Epson, HP, etc.)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Thanks for these precisions.&lt;/p&gt;&#xA;" OwnerUserId="27579" LastEditorUserId="25612" LastEditDate="2022-03-20T21:43:38.907" LastActivityDate="2023-12-11T06:05:15.633" Title="I have some features in mind about the perfect Linux OS: does elementary OS will answer to them?" Tags="|keyboard-shortcuts|encryption|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29268" PostTypeId="2" ParentId="29239" CreationDate="2021-12-08T09:05:24.380" Score="0" Body="&lt;p&gt;The support for the Everest ES8336 sound card is discussed in this thread within thesofproject:&#xA;&lt;a href=&quot;https://github.com/thesofproject/linux/issues/3248&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/thesofproject/linux/issues/3248&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27553" LastActivityDate="2021-12-08T09:05:24.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29270" PostTypeId="2" ParentId="29244" CreationDate="2021-12-08T21:15:48.503" Score="0" Body="&lt;p&gt;I disables &amp;quot;suspend&amp;quot; to see if it is better :&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo systemctl mask sleep.target suspend.target hibernate.target hybrid-&amp;gt; sleep.target&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="27556" LastActivityDate="2021-12-08T21:15:48.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29272" PostTypeId="1" CreationDate="2021-12-09T02:25:18.840" Score="0" ViewCount="38" Body="&lt;p&gt;I deactivated the wingpanel which was buggy on the old PC, but I would like to show the date/time and logout buttons on the desktop. (I kept Plank and what I beleive is Gala).&lt;/p&gt;&#xA;&lt;p&gt;1 - After looking a bit around, it seems I could use some panel creator or launcher, would anyone know of a simple minimalist way to achieve this for Elementary OS Odin ?&lt;/p&gt;&#xA;&lt;p&gt;2 - I would be happy to customize the right-clic-on-desktop context menu to show Applications and shutdown command but could not find how to do that ( I did put an Application menu in Plank, though).&#xA;I have an application called &amp;quot;Menu Principal&amp;quot; that allows to switch on and off some submenus for Application Menu, but nothing for the desktop menu. Where should I look for it ?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your input :)&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2021-12-09T02:25:18.840" Title="Not using wingpanel, any widget for time and reboot on Odin's desktop?" Tags="|wingpanel|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29274" PostTypeId="2" ParentId="9776" CreationDate="2021-12-09T13:44:12.067" Score="0" Body="&lt;p&gt;For elementary OS 6 users that want to use Clipped, you need to compile and install it directly from the source code.&lt;/p&gt;&#xA;&lt;p&gt;The compile and install steps are easy as follow:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install meson libgtk-3-dev valac libsqlite3-dev libgee-0.8-dev &lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;git clone https://github.com/davidmhewitt/clipped&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cd clipped&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;meson build --prefix=/usr&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;cd build&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;ninja&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo ninja install&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="27577" LastActivityDate="2021-12-09T13:44:12.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29279" PostTypeId="1" CreationDate="2021-12-09T23:43:19.547" Score="0" ViewCount="29" Body="&lt;p&gt;I accidentally erased .config&lt;/p&gt;&#xA;&lt;p&gt;Many programs disappeared, all files, disappeared&lt;/p&gt;&#xA;&lt;p&gt;Tried to recover data using RLinux and testdisk but with no success&lt;/p&gt;&#xA;" OwnerUserId="27592" LastEditorUserId="27593" LastEditDate="2021-12-12T09:11:44.073" LastActivityDate="2022-01-11T10:06:50.730" Title="Accidentally erased .config" Tags="|system|desktop|home|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29283" PostTypeId="1" CreationDate="2021-12-10T10:09:37.630" Score="0" ViewCount="232" Body="&lt;p&gt;I just wanted to bring back my apps indicatiors, but when I used one of tutorials found on internet my Wingpanel just disappeared. I tried &lt;code&gt;killall wingpanel&lt;/code&gt; and and &lt;code&gt;wingpanel&lt;/code&gt; but terminal says &lt;code&gt;process not found&lt;/code&gt; and &lt;code&gt;command not found&lt;/code&gt;.&#xA;I also tried &lt;code&gt;sudo apt install wingpanel&lt;/code&gt; and &lt;code&gt;sudo apt purge wingpanel&lt;/code&gt; and then install again but it also doesn't work. Any solutions?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: I tried running &lt;code&gt;io.elementary.wingpanel&lt;/code&gt; and I think this is it. But I got an error.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;(io.elementary.wingpanel:21488): io.elementary.wingpanel.notifications-CRITICAL **: 12:17:39.227: NotificationEntry.vala:79: Unable to mask image: Failed to open file “/tmp/wingpanel-YWMDE1.png”: No such file or directory&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-CRITICAL **: 12:17:39.337: g_object_new_is_valid_property: object class 'AyatanaCompatibilityMetaIndicator' has no property named 'display-name'&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-WARNING **: 12:17:39.414: invalid (NULL) pointer instance&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-CRITICAL **: 12:17:39.414: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed&#xA;&#xA;(io.elementary.wingpanel:21488): libnm-CRITICAL **: 12:17:39.414: ((libnm-core/nm-connection.c:193)): assertion '&amp;lt;dropped&amp;gt;' failed&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-WARNING **: 12:17:39.734: cannot register existing type 'AyatanaCompatibilityMetaIndicator'&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-CRITICAL **: 12:17:39.734: g_once_init_leave: assertion 'result != 0' failed&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-CRITICAL **: 12:17:39.734: g_object_new_valist: assertion 'G_TYPE_IS_OBJECT (object_type)' failed&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-GObject-WARNING **: 12:17:39.734: cannot register existing type 'AyatanaCompatibilityIndicator'&#xA;&#xA;(io.elementary.wingpanel:21488): GLib-CRITICAL **: 12:17:39.734: g_once_init_leave: assertion 'result != 0' failed&#xA;[1]    21488 segmentation fault  io.elementary.wingpanel&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;already tried to purge and install again but I get the same error.&lt;/p&gt;&#xA;" OwnerUserId="26272" LastEditorUserId="26272" LastEditDate="2021-12-10T11:19:06.187" LastActivityDate="2021-12-10T11:19:06.187" Title="Wingpanel disappeared, and can't install" Tags="|wingpanel|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29284" PostTypeId="2" ParentId="4226" CreationDate="2021-12-10T10:29:54.173" Score="1" Body="&lt;p&gt;For those who are using Elementary OS 5 or 6:&lt;/p&gt;&#xA;&lt;p&gt;Add repo:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:yunnxx/elementary&#xA;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Install:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install indicator-application wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Edit configfile with your editor:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo &amp;lt;your editor&amp;gt; /etc/xdg/autostart/indicator-application.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change line &lt;code&gt;OnlyShowIn=Unity;GNOME;&lt;/code&gt; to &lt;code&gt;OnlyShowIn=Unity;GNOME;Pantheon;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Save file and reboot system.&lt;/p&gt;&#xA;&lt;p&gt;Result:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/kZejK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kZejK.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Source:&#xA;&lt;a href=&quot;https://www.reallinuxuser.com/how-to-show-app-indicators-on-the-system-tray-in-elementary-os/&quot; rel=&quot;nofollow noreferrer&quot;&gt;How to show app indicators on the system tray in elementary OS&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Double wifi icon:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Disable by renaming this config file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /etc/xdg/autostart/nm-applet.desktop /etc/xdg/autostart/nm-applet.desktop.old&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot system to see changes.&lt;/p&gt;&#xA;" OwnerUserId="3542" LastEditorUserId="3542" LastEditDate="2021-12-10T10:41:08.520" LastActivityDate="2021-12-10T10:41:08.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29285" PostTypeId="1" CreationDate="2021-12-10T13:17:22.850" Score="0" ViewCount="64" Body="&lt;p&gt;Is is possible to swap these two taps without affecting anything else ?&lt;/p&gt;&#xA;&lt;p&gt;In latest gnome, as far as i know, it is possible to remap using a dconf setting,&#xA;&lt;code&gt;org.gnome.desktop.peripherals.touchpad.tap-button-map&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;which isnt available in elemantary os 6&lt;/p&gt;&#xA;" OwnerUserId="27598" LastActivityDate="2021-12-10T13:17:22.850" Title="swap 2 finger tap and 3 finger" Tags="|touchpad|dconf|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="29293" PostTypeId="1" CreationDate="2021-12-11T14:19:51.570" Score="0" ViewCount="72" Body="&lt;p&gt;I just updated my system (now elementary OS 5.1.7 Hera), and both the login and lock screen do not work properly. I have three users on this machine but this is what I get when I login or come back from a lock&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4KHFs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4KHFs.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;no user icons or names, and I completely miss one user.&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2024-01-01T02:00:45.063" Title="Login and lock screen doesn't work on Freya" Tags="|release-hera|greeter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29296" PostTypeId="2" ParentId="29293" CreationDate="2021-12-11T20:08:16.873" Score="0" Body="&lt;p&gt;@PinkCollins. I raised the same question on Reddit elementary forum, looks like it's an issue in recent built.&lt;/p&gt;&#xA;&lt;p&gt;try the recommendation given on Reddit &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/rd3xd9/lock_screen_issue_on_elementaryos_517_herra/&quot; rel=&quot;nofollow noreferrer&quot;&gt;lock screen issue on Elementary-OS 5.1.7 Herra&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27609" LastActivityDate="2021-12-11T20:08:16.873" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29298" PostTypeId="2" ParentId="28677" CreationDate="2021-12-11T20:59:11.020" Score="0" Body="&lt;p&gt;For me the issue seemed to be caused by the &amp;quot;Deepin Screenshot&amp;quot; plugin. After uninstalling the utility, the OS notifications returned properly.&lt;/p&gt;&#xA;&lt;p&gt;You can remove Deepin Screenshot from the software center, or from the Terminal with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove deepin-screenshot&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can then test it with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;notify-send &amp;quot;Hello world!&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27611" LastEditorUserId="25612" LastEditDate="2022-03-20T21:41:47.210" LastActivityDate="2022-03-20T21:41:47.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29301" PostTypeId="2" ParentId="28596" CreationDate="2021-12-13T00:31:59.030" Score="0" Body="&lt;p&gt;Changing the Virtualbox Display Graphics Controller for my elementaryOS virtual machine to the non-default &amp;quot;VBoxSVGA&amp;quot; also worked.  HOWEVER, I had problems until I installed the Virtualbox Extension Pack.  I recently updated to Virtualbox 6.1 and was not automatically prompted to reinstall the extension, which prevented me selecting any graphics controller other than VMSVGA.  After installing the extensions I changed the graphics controller and ElementaryOS installed fine.&lt;/p&gt;&#xA;" OwnerUserId="27616" LastActivityDate="2021-12-13T00:31:59.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29302" PostTypeId="1" CreationDate="2021-12-13T13:35:06.563" Score="1" ViewCount="14" Body="&lt;p&gt;I am trying to control the zoom in &amp;amp; out factor, searched using &lt;code&gt;dconf editor&lt;/code&gt; for the factor and found one:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/ouR8O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ouR8O.png&quot; alt=&quot;dconf window&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But changing &lt;code&gt;2&lt;/code&gt; to any other number doesn't change the magnifier factor. Is there any solutions?&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2021-12-13T13:35:06.563" Title="How can I edit the magnifier zooming factor?" Tags="|desktop|accessibility|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29304" PostTypeId="1" AcceptedAnswerId="29307" CreationDate="2021-12-13T15:45:48.407" Score="0" ViewCount="451" Body="&lt;p&gt;It returns the following after $ sudo apt update or $ sudo apt-get update or etc...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Err:12 http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu focal Release &#xA;  404  Not Found [IP: 91.189.95.85 80]\&#xA;Err:13 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xanial Release\&#xA;  404  Not Found [IP: 91.189.95.85 80]\&#xA;Reading package lists... Done                      &#xA;E: The repository 'http://ppa.launchpad.net/mpstark/elementary-tweaks-daily/ubuntu focal Release' does not have a Release file.\&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.\&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.\&#xA;E: The repository 'http://ppa.launchpad.net/elementary-os/os-patches/ubuntu xanial Release' does not have a Release file.\&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.\&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27618" LastEditorUserId="3018" LastEditDate="2021-12-13T17:18:57.083" LastActivityDate="2021-12-14T00:44:39.697" Title="Elementary os 6 can't sudo apt-get update or any other apt-get" Tags="|updates|pantheon-terminal|apt|odin|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29305" PostTypeId="1" AcceptedAnswerId="29306" CreationDate="2021-12-13T22:42:18.130" Score="0" ViewCount="48" Body="&lt;p&gt;First day of linux. (Trying to learn.)&lt;/p&gt;&#xA;&lt;p&gt;Install was smooth, took 5 min of my time following directions. OS is beautiful and quick.&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 6 Odin&lt;br /&gt;&#xA;Ubuntu 20.04.3 LTS&lt;br /&gt;&#xA;Linux 5.11.0-41-generic&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;No internet.&lt;/strong&gt; 5 hours of troubleshooting. no luck.&lt;/p&gt;&#xA;&lt;p&gt;(built-in ethernet) Intel I219-V&lt;br /&gt;&#xA;(USB wifi adapter brand new) TP-Link TL WN823N RTL8192EU&lt;br /&gt;&#xA;(USB wifi adapter old) NetGear A6100 AC600 [Realtek RTL8811AU]&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Downloaded drivers from another computer and transferred with USB.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;---&amp;gt; 2. Cannot use &amp;quot;make&amp;quot; command to install them.&lt;/p&gt;&#xA;&lt;p&gt;------&amp;gt; 3. Tried to download make pkg and transfer with USB.&lt;/p&gt;&#xA;&lt;p&gt;---------&amp;gt; 4. Cannot install &amp;quot;make&amp;quot; without using &amp;quot;dkms&amp;quot; command.&lt;/p&gt;&#xA;&lt;p&gt;------------&amp;gt; 5. Cannot instal dkms pkg without an overwhelming number of dependencies...&lt;/p&gt;&#xA;&lt;p&gt;Do other people run into these kinds of issues?&lt;br /&gt;&#xA;It seems like no driver and no common command is pre-installed.&lt;br /&gt;&#xA;(Nor are they easy to deliver to a machine with no internet access...)&lt;/p&gt;&#xA;&lt;p&gt;I guess to some people there is a benefit to the barebones approach?&lt;/p&gt;&#xA;&lt;p&gt;What do I do though? Thank you for any advice, I'm trying to learn.&lt;/p&gt;&#xA;" OwnerUserId="27622" LastActivityDate="2021-12-14T00:35:58.353" Title="(New Linux User) elementaryOS installed smooth, but no internet -&gt; STUCK" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29306" PostTypeId="2" ParentId="29305" CreationDate="2021-12-14T00:35:58.353" Score="0" Body="&lt;p&gt;This is certainly an unfortunate situation, but may not be too complicated if you have access to another computer that is running Elementary. This can also be done within a VM if your other machine is running a non-Linux OS.&lt;/p&gt;&#xA;&lt;p&gt;In order to build the drivers on your machine, you will need to use &lt;code&gt;apt download&lt;/code&gt; to get the &lt;code&gt;build-essential&lt;/code&gt; packages required to compile them. This can be done in a Terminal like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt download &amp;lt;packages name here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;For you, the command would look like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt download build-essential make libc6-dev g++ gcc dpkg-dev libc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;From here, you will need to copy the packages (&lt;code&gt;.deb&lt;/code&gt; files) to a USB stick (or some other transportable media) and move them to the Elementary machine. To install them, you will do something like this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install &amp;lt;path to .deb file here&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Once the &lt;code&gt;build-essential&lt;/code&gt; and other packages are installed, you should be able to compile the network driver(s) for your machine.&lt;/p&gt;&#xA;&lt;p&gt;It's not often that a person has to jump through this many hoops when starting out with a modern Linux installation, but some hardware requires a little more effort at the start.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-14T00:35:58.353" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29307" PostTypeId="2" ParentId="29304" CreationDate="2021-12-14T00:44:39.697" Score="1" Body="&lt;p&gt;To remove the two PPAs that are giving you errors, you will need to edit your &lt;code&gt;sources.list&lt;/code&gt; file.&lt;/p&gt;&#xA;&lt;p&gt;Here's how:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open Terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Edit the &lt;code&gt;sources.list&lt;/code&gt; file:&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Feel free to use any text editor that you prefer. It does not need to be &lt;code&gt;vi&lt;/code&gt;.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;Find the lines that refer to the URLs that are failing&lt;/li&gt;&#xA;&lt;li&gt;Add a &lt;code&gt;#&lt;/code&gt; to the start of the line, or remove the line completely&lt;/li&gt;&#xA;&lt;li&gt;Update &lt;code&gt;apt&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;You should not see the error(s) anymore.&lt;/p&gt;&#xA;&lt;p&gt;If the URLs were not in &lt;code&gt;sources.list&lt;/code&gt;, then they will be in a &lt;code&gt;.list&lt;/code&gt; file somewhere inside the &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; directory. This really depends on &lt;em&gt;how&lt;/em&gt; you added the PPAs to your system to begin with. However, the instructions above apply here as well. Open the file and comment out (or remove) the line.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-14T00:44:39.697" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29313" PostTypeId="1" AcceptedAnswerId="29314" CreationDate="2021-12-14T14:48:13.360" Score="1" ViewCount="1033" Body="&lt;p&gt;I was updating my system today and it keeps refusing to install the new operating system updates. I even reinstalled my operating system and it still refuses to load. Here is what the Error is:&lt;/p&gt;&#xA;&lt;p&gt;The following packages have unmet dependencies:&#xA;libpantheon-files-core0: Conflicts: libpantheon-files-widgets0 (&amp;lt; 6.1.1) but 6.1.0+r5055+pkg107~ubuntu6.1 is to be installed .&lt;/p&gt;&#xA;&lt;p&gt;Does anyone know how to fix this?&lt;/p&gt;&#xA;" OwnerUserId="27624" LastActivityDate="2021-12-22T20:44:17.147" Title="Latest Operating system Updates failed to install" Tags="|updates|release-odin|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="29314" PostTypeId="2" ParentId="29313" CreationDate="2021-12-14T16:44:08.880" Score="0" Body="&lt;p&gt;The error can be disregarded because it is harmless according to this issue on GitHub: &lt;a href=&quot;https://github.com/elementary/appcenter/issues/1796&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/1796&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So there is no problem to fix, and you can keep using the computer as usual without any issues as a result of this error message.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-14T16:44:08.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29315" PostTypeId="1" CreationDate="2021-12-14T18:32:22.483" Score="0" ViewCount="36" Body="&lt;p&gt;I connected my Pantheon e-mail client (included in Elementary Linux distro) to my IMAP e-mail service.&#xA;I can then only see recently sent e-mails in the Sent folder, not e-mails I sent weeks ago.&#xA;I can see ALL those old ones in my mobile phone client (iOS).&#xA;Is and if so where is the config that changes this behavior?&lt;/p&gt;&#xA;" OwnerUserId="27626" LastActivityDate="2024-01-04T04:10:21.197" Title="How to see ALL (or most) previously sent e-mails using Pantheon e-mail client and an IMAP server ? I only see the most recent, since I configured it" Tags="|settings|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29316" PostTypeId="1" CreationDate="2021-12-14T20:32:34.790" Score="0" ViewCount="42" Body="&lt;p&gt;I want to install a Linux distro for the first time and I really like elementaryOS, but I can't seem to find out how to get the .iso. In the main page, where it asks for donation for the .iso, it doesn't let me do it. I tried with 10, 20, 30 and many custom dollar choices, but when I click on &amp;quot;Purchase elementary OS&amp;quot;, nothing happens. What am I missing?&lt;/p&gt;&#xA;&lt;p&gt;Sorry for bothering with such a stupid question.&lt;/p&gt;&#xA;" OwnerUserId="27627" LastActivityDate="2021-12-15T09:35:40.473" Title="How to download the iso file? Sorry for being this stupid" Tags="|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29317" PostTypeId="2" ParentId="29316" CreationDate="2021-12-14T21:46:48.097" Score="1" Body="&lt;p&gt;What you're doing is supposed to bring up a dialog where you can enter your email and card details:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/lrpV2.png&quot; alt=&quot;Purchase Elementary&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;If that isn't happening, you may want to check that your browser is not blocking Javascript.&lt;/p&gt;&#xA;&lt;p&gt;Alternatively, you could set the price to zero, and then click the blue button, which will update to say &amp;quot;Download elementary OS&amp;quot;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ws3Vo.png&quot; alt=&quot;Set to Zero&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can always buy it at another time to support the project.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastEditorUserId="25612" LastEditDate="2021-12-15T09:35:40.473" LastActivityDate="2021-12-15T09:35:40.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29318" PostTypeId="2" ParentId="29315" CreationDate="2021-12-14T21:53:22.283" Score="0" Body="&lt;p&gt;Make sure to check all your folders. I have one folder called &amp;quot;Sent&amp;quot; and one called &amp;quot;Sent Items&amp;quot;, that can be confusing.&lt;/p&gt;&#xA;&lt;p&gt;You can also right click each folder and press &amp;quot;Refresh folder&amp;quot; to force it to download emails from the server. It doesn't give any feedback when you do this, so just wait a few seconds and see if emails start popping up.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-14T21:53:22.283" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29319" PostTypeId="1" CreationDate="2021-12-15T12:46:38.023" Score="1" ViewCount="96" Body="&lt;p&gt;I am trying to load my Google CalDav on Elementary OS 6.1 however I keep getting a 401 error when trying to load it using online accounts.&lt;/p&gt;&#xA;&lt;p&gt;Any idea if its broken or if I am doing it wrong. I do have 2FA setup and I also have an app password set that I am using&lt;/p&gt;&#xA;&lt;p&gt;Would appreciate some insight here&lt;/p&gt;&#xA;" OwnerUserId="692" LastActivityDate="2021-12-15T12:46:38.023" Title="Load CalDav on Elementary OS 6" Tags="|pantheon-mail|switchboard|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29320" PostTypeId="2" ParentId="17192" CreationDate="2021-12-15T13:22:49.043" Score="0" Body="&lt;p&gt;Try using the &lt;a href=&quot;https://flathub.org/apps/details/com.spotify.Client&quot; rel=&quot;nofollow noreferrer&quot;&gt;official Spotify Flatpak&lt;/a&gt; instead of the Snap.&lt;/p&gt;&#xA;" OwnerUserId="27554" LastActivityDate="2021-12-15T13:22:49.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29321" PostTypeId="1" CreationDate="2021-12-16T13:50:45.093" Score="0" ViewCount="46" Body="&lt;p&gt;Hello My panel bat is gone how do I fix this. I been looking everywhere. I tired looking on Google nothing &lt;strong&gt;works&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="27630" LastActivityDate="2024-01-06T09:06:50.803" Title="My panel bar is gone" Tags="|wingpanel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29323" PostTypeId="1" CreationDate="2021-12-16T17:03:39.220" Score="1" ViewCount="36" Body="&lt;p&gt;NEED TO display my device's total network usage in the status bar&lt;/p&gt;&#xA;" OwnerUserId="27632" LastActivityDate="2021-12-16T17:03:39.220" Title="!!! NEED TO display my device's total network usage in the status bar?" Tags="|release-hera|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29324" PostTypeId="1" CreationDate="2021-12-16T18:57:50.807" Score="1" ViewCount="13" Body="&lt;p&gt;“wingpanel” terminated by signal SIGSEGV (Address boundary error) (in fish shell)&lt;/p&gt;&#xA;" OwnerUserId="27632" LastActivityDate="2021-12-16T18:57:50.807" Title="Wingpanel terminates when selecting a indicator and moving mouse to edge" Tags="|release-hera|wingpanel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29327" PostTypeId="2" ParentId="29321" CreationDate="2021-12-17T01:12:18.843" Score="0" Body="&lt;p&gt;If the panel is gone, this can usually be fixed with a reboot. You may need to issue the command from Terminal, though. Here's how:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Press &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;T&lt;/kbd&gt; to open Terminal&lt;/li&gt;&#xA;&lt;li&gt;Reboot the system:&#xA;&lt;pre&gt;&lt;code&gt;sudo shutdown -r now &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If the wing panel does not return after booting, then it has either been removed for some reason or is running into an error. Be sure to update your question with more details if a reboot does not resolve the issue.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2021-12-17T01:12:18.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29328" PostTypeId="1" CreationDate="2021-12-17T17:21:15.300" Score="0" ViewCount="379" Body="&lt;p&gt;So one of the first things I tried to do with my fresh install of Elementary OS turned out to be a noob mistake. I followed a youtube tutorial to install Elementary Tweaks only to learn that it's not compatible with Odin. I should have installed Pantheon Tweaks instead.&lt;/p&gt;&#xA;&lt;p&gt;So I follow the instructions to do that and it says missing dependencies. &amp;quot;libgranite5&amp;quot; and &amp;quot;libpantheon-files-core0&amp;quot; to be exact. But when I try to &amp;quot;sudo apt-get install&amp;quot; those they return &amp;quot;E: Unable to locate package&amp;quot;. So now I'm stumped.&lt;/p&gt;&#xA;" OwnerUserId="27636" LastActivityDate="2024-01-07T10:01:20.143" Title="Installing missing dependencies" Tags="|pantheon-files|pantheon|release-odin|dependencies|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29329" PostTypeId="1" CreationDate="2021-12-17T17:43:37.110" Score="2" ViewCount="284" Body="&lt;p&gt;Due to a computer error I'm not going to discus, I now have Windows 10 only, and it looks like it's going to stay that way.  However, all the times I had to reinstall eOS caused me to keep a set of instructions on how to do the most basic customization tasks.  I don't see a way to attach a file, so the whole thing is pasted in below in hopes that it helps someone else.&lt;/p&gt;&#xA;&lt;p&gt;The instructions were sometimes wrong or didn't work for me.  All of the steps are numbered, so the best thing to do is to read an entire numbered step to make sure I didn't add any notes to the bottom of that step, then do it.&lt;/p&gt;&#xA;&lt;p&gt;Also, my username is unknowable so it's sometimes in the help file as part of a command.  If you see unknowable in a command line example, exchange unknowable for your username.&lt;/p&gt;&#xA;&lt;p&gt;ACTUAL HELP FILE BELOW:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;_________________________________________________________________________________________&#xA;    &#xA;1. SETUP AND INSTALL&#xA;    &#xA;To install, use Etcher to install the elementary OS Live iso onto a thumb drive.  Fully defrag the drive you're going to install to.  Create at least 3 partitions: your root partition only needs to be 20GB really.  30GB would be enormous.  You'll need a partition for /boot/efi/ but this only needs to be like 500MB.  Finally, you'll need a large amount of space for your home directory, where everything will get installed to.&#xA;      Yes, you can do the normal install.  It will wipe the drive you choose and use most of the available space for your home directory, which can be encrypted by using the LUKS filesystem, and that's the only way to do it.&#xA;    &#xA;    SETUP NOTES:  As of eOS 6, I can't get the Custom install to work at all.  It starts the install then gives an error, always the same error at the same place no matter what drive you install from or to.  I eventually chose Normal install, which created two small boot partitions and the rest of the drive space for /.  This does allow you to LUKS encrypt the root directory, but of course leaving the boot partitions unencrypted.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    2, INSTALL WIFI&#xA;    &#xA;    Read &amp;quot;!wifi help - READ THIS!!.txt&amp;quot;.&#xA;    &#xA;    EDITOR'S NOTE: I had tons of issues installing my Netgear A6100 USB wifi adapter, and created its own help file.  It's not posted here for brevity reasons.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    &#xA;    3. INSTALL Synaptic Package Manager:&#xA;    &#xA;    sudo apt-get install synaptic&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    4. RUN plymouth&#xA;    &#xA;    Plymouth by itself is already installed, but you still need to (maybe download) and install Plymouth Manager:&#xA;    &#xA;    plymouth-manager_1.5.0-1_all.deb&#xA;    https://launchpad.net/plymouth-manager/+download&#xA;    &#xA;This is a Debian package and it has broken dependencies (pythongtk-2.0).  It will not build, so no Plymouth.&#xA;_________________________________________________________________________________________&#xA;    &#xA;    5. INSTALL grub-customizer&#xA;    &#xA;    Open Synaptic and install grub-customizer. Run and setup, then reboot and continue:&#xA;    &#xA;    GRUB-customizer looks in the wrong place for boot info.  It should be looking in /boot/efi/EFI/ubuntu/grub/grub.conf for the actual grub.conf or to /etc/grub.d for the config files that build the grub.conf.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    6. RUN THESE COMMANDS&#xA;    &#xA;    sudo apt-get update&#xA;    sudo apt install ubuntu-restricted-extras&#xA;    sudo apt install libavcodec-extra&#xA;    sudo apt install libdvd-pkg&#xA;    sudo dpkg-reconfigure libdvd-pkg&#xA;    sudo apt install gimp&#xA;    sudo ubuntu-drivers autoinstall&#xA;    sudo apt install gdebi - for installing .deb files&#xA;    sudo apt-get autoclean - for cleaning up after installing&#xA;    sudo apt-get clean - for cleaning up the cache&#xA;    sudo apt-get autoremove - cleans up dependencies&#xA;    flatpaks are configured on eOS install, but go to flathub.org and setup&#xA;        install any flatpak from there and it will grab the repository&#xA;        in the AppCenter.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    7. ADD ZOOM EFFECT TO PLANK - DESTROYS PLANK DOCKLETS&#xA;    &#xA;    go to https://launchpad.net/plank&#xA;    &#xA;    download the source at the bottom, then choose the orig.tar.xz file - that's the source.  Then extract it.  You'll have to get file-roller from Synaptic.  Then you can open a terminal in the folder you extracted to and build plank's dependencies:&#xA;    &#xA;    sudo apt build-dep plank&#xA;    &#xA;    then compile:&#xA;    &#xA;    sudo ./configure&#xA;    make&#xA;    &#xA;    It's common to see lots of warnings and red text during the make.&#xA;    &#xA;    sudo make install&#xA;    sudo apt install --reinstall plank libplank*&#xA;    sudo nano /usr/share/plank/themes/Default/dock.theme&#xA;    &#xA;    That will open the default dock.theme for editing.  Just add to the bottom:&#xA;    &#xA;    #Zoom&#xA;    ZoomEnabled=true&#xA;    ZoomPercent=180&#xA;    &#xA;    Then press Ctrl-O &amp;gt; Enter to save and Ctrl-X to exit nano.&#xA;    &#xA;    cat /usr/share/plank/themes/Default/dock.theme&#xA;    &#xA;    to see the changes you made to the file.  Reboot, then login and go to the Applications menu and search for&#xA;    plank --preferences&#xA;    This will show you prefs for Plank, as well as the new zoom function at the bottom.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    8. INSTALL PLANK THEME&#xA;    &#xA;    Rename 'Lumi Cool' to LumiCool then copy the LumiCool folder to /usr/share/plank/themes/ like this:&#xA;    &#xA;    unknowable@Elite8300:/usr/share/plank/themes$ sudo mkdir LumiCool&#xA;    [sudo] password for unknowable:&#xA;    unknowable@Elite8300:/usr/share/plank/themes$ cd LumiCool/&#xA;    unknowable@Elite8300:/usr/share/plank/themes/LumiCool$ sudo cp '/media/unknowable/2_TB/!everything else/System tools/linux/System tools/Plank (dock) themes/Lumi Cool/'*.* ./&#xA;    unknowable@Elite8300:/usr/share/plank/themes/LumiCool$ plank --preferences&#xA;    &#xA;    &#xA;    Copy the theme you like to ~/.local/share/themes/&amp;lt;THEME NAME&amp;gt;/gtk-3.0/&#xA;    Install the theme you like, then add the icon pack to that theme.  Copy the icons to ~/.icons/&amp;lt;THEME NAME&amp;gt;/&#xA;    Install the theme you like, then add the cursor pack to that theme.  Copy the weed cursors to ~/.icons/&amp;lt;THEME NAME&amp;gt;/cursors/&#xA;See the following page for more info on setting up the cursors:&#xA;    https://askubuntu.com/questions/823656/where-are-cursor-icons-stored-on-ubuntu-16-04&#xA;    &#xA;    The cursors are indeed installed in the /usr/share/icons folder. User specific cursor themes can be installed in ~/.local/share/icons folder although for elementary OS use, follow the first direction: copy the weed cursors to ~/.icons/&amp;lt;THEME NAME&amp;gt;/cursors/ .&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    9. INSTALL PANTHEON TWEAKS&#xA;    &#xA;    Setup software-properties-common and allow installation from PPA's:&#xA;    &#xA;    sudo apt install software-properties-common&#xA;    sudo add-apt-repository -y ppa:philip.scott/pantheon-tweaks&#xA;    sudo apt install pantheon-tweaks&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    10. ADD ICONS TO THE SYSTEM TRAY - NEVER WORKED  :(&#xA;    &#xA;    THIS NEVER WORKED FOR ME, SO REMOVED  :(&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    11. CHANGE BACKGROUND ON LOGIN SCREEN&#xA;    &#xA;    First you have to install git and ImageMagick:&#xA;    &#xA;    sudo apt install git imagemagick-6.q16&#xA;    &#xA;    Next you have to install dependencies:&#xA;    &#xA;    sudo apt build-dep io.elementary.greeter&#xA;    &#xA;    Next, set your wallpaper's filetype to png, rename it to texture.png, and move it to ~/Pictures/&#xA;    &#xA;    Clone the github repository:&#xA;    &#xA;    sudo git clone https://github.com/Blackmanx/elementaryOS-lockscreen-bgreplacer bgreplacer&#xA;    &#xA;    cd bgreplacer&#xA;    &#xA;    execute the bash script:&#xA;    &#xA;    chmod +x *.sh&#xA;    &#xA;    sudo /home/unknowable/bgreplacer/background.sh&#xA;    &#xA;    If you prefer your login wallpaper to be blurry instead of clear, run:&#xA;    &#xA;    sudo /home/unknowable/bgreplacer/background-blur.sh&#xA;    &#xA;    Restart to make the change take effect.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    12. INSTALL GNOME TASK MANAGER (Usage)&#xA;    &#xA;    sudo apt install gnome-usage&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    13. FIX SUSPEND ISSUE IN eOS&#xA;    &#xA;    sudo apt install pm-utils&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    14. INSTALL GNOME DISK UTILITY&#xA;    &#xA;    The Gnome Disk Utility (aka &amp;quot;Disks&amp;quot;) allows you to work with drives and partitions directly.  To install it:&#xA;    &#xA;    sudo apt install gnome-disk-utility&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    15. INSTALL INDICATOR STICKYNOTES&#xA;    &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;EDITOR'S NOTE:  I never got this functioning properly because it usually didn't show in the system tray.  Ended up uninstalling.&#xA;_________________________________________________________________________________________&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    16.  INSTALL DIGIKAM PHOTO MANAGER&#xA;    &#xA;    sudo apt install digikam&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    17. ADD FOLDERS TO PLANK&#xA;    https://askubuntu.com/questions/1306476/how-creation-of-folders-inside-of-plank-be-done-in-ubuntu-20-04-lts-while-retain&#xA;    &#xA;    To create application launcher groups in Plank Dock, create folders somewhere on your system for each group you want to create, e.g. &amp;quot;Games&amp;quot;, &amp;quot;Office&amp;quot;, ... Then populate each of these folders with the .desktop launchers of the programs you want to include.&#xA;    &#xA;    You can find most .desktop files of your applications in the folder /usr/share/applications. Those from applications installed as a snap are in /var/lib/snapd/desktop/applications/.  If you're still  having issues finding the *.desktop files, just navigate to root and search for *.desktop.  That will search the entire file system for .desktop apps.  You can edit those .desktop files to change the icon of the program, then copy those files to the folders you created.&#xA;    &#xA;    Finally, drag the folders to Plank to add it to the dock. Clicking it will reveal a list of the applications that you can launch.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    18. INSTALL NEMO FILE MANAGER&#xA;    &#xA;    sudo add-apt-repository ppa:webupd8team/nemo&#xA;    sudo apt-get update&#xA;    sudo apt-get install nemo file-roller&#xA;    sudo apt-get install nemo nemo-fileroller - SEEMS UNNECESSARY AFTER THE PREVIOUS LINE&#xA;    &#xA;    EDITOR'S NOTE: Still never got it properly using this.  Got it from Synaptic much later, so you may still need to add the repository.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    19. USING dd TO INSTALL AN ISO TO USB (TUTORIAL FROM FIREFOX):&#xA;    &#xA;    Plug in the USB flash drive and determine the device it's mounted on with the command:&#xA;    &#xA;    sudo fdisk -l&#xA;    &#xA;    This time around it was /dev/sdd for me, so I'll use that as my example.&#xA;    &#xA;    Unmount the device:&#xA;    &#xA;    umount /dev/sdd&#xA;    &#xA;    The next step is to copy the iso. This will take several minutes if you have an iso file that is a few GB in size. Copy to the device not partition (i.e., copy to sdc not sdc1) as shown below:&#xA;    &#xA;    sudo dd if='/home/USERNAME/!everything else/System tools/Windows 7 Ultimate - SP1 - X64/Win_7_ultimate_sp1_x64.iso' of=/dev/sdd bs=4M&#xA;    &#xA;    Perform final steps :&#xA;    &#xA;    sync&#xA;    &#xA;    When you're ready to take out the drive, do this:&#xA;    &#xA;    sudo eject /dev/sdd&#xA;            _________________________________________________________________________________________&#xA;    &#xA;    20. INSTALL HIDDEN STARTUP APPS&#xA;    &#xA;    sudo sed -i 's/NoDisplay=true/NoDisplay=false/g' /etc/xdg/autostart/*.desktop&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    21. INSTALL DCONF EDITOR&#xA;    &#xA;    sudo apt-get install dconf-editor&#xA;    &#xA;    For those coming from windows that want a simple reply, dconf is the gnome equivalent to the windows registry... a big binary tree where any program can store and share their configuration.&#xA;    &#xA;    They first migrated from the traditional unix configs (one text files for each app, each with their own format) to a standard tree of XML files, managed by gconf. In recent times, as almost no one edited those XML files directly and the performance problems of reading and parsing MANY files, they migrated to a binary format by migrating from gconf to dconf.&#xA;    &#xA;    Unlike windows registry, dconf should have all config entries listed, even if they are set to the default values. So there are no hidden entries, you can change then or reset then to default easily.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    22. INSTALL XCURSORGEN AND GURSORMAKER TO CONVERT .ANI TO X11 CURSORS&#xA;    &#xA;    sudo apt-get install x11-apps&#xA;    &#xA;    The .deb file is located in ~/!everything else/System tools/linux/System tools/gursormaker*.deb&#xA;    &#xA;    See more on #25.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    23. INSTALL DEB (tabbed text editor)&#xA;    &#xA;    EDITOR'S NOTE: It turned out that I preferred Atom over deb, so this instruction is pointless and it was removed.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    24. INSTALL ICON PACKS&#xA;    &#xA;    In Home folder&#xA;    - Make folder .icons in your home folder&#xA;    - Download the tar file and extract it&#xA;    - In terminal run command ~$ gtk-update-icon-cache ~/.icons/namefile (ex : Bloom-Green)&#xA;    &#xA;    In Root folder&#xA;    - Download the tar file and extract it&#xA;    - Copy paste in /usr/share/icons (can use GUI via file manager as Root or command line)&#xA;    - In terminal run command ~$ sudo gtk-update-icon-cache /usr/share/icons/namefile (ex : Bloom-Green)&#xA;    You can then go to System Settings: Tweaks: Appearance (default open) and change your icons to Bloom-Green&#xA;    &#xA;    https://palko-drawing.deviantart.com/art/Black-18-01-14-725497336&#xA;    &#xA;    Open the file manager to root and search for &amp;quot;*.desktop&amp;quot; (without the quotes).  That will pull up a list of every program link on the computer.  Although they are changed back to default on upgrade, you can edit the .desktop files in a text editor.  Search for &amp;quot;Icon=&amp;quot; (without the quotes) and change it to a .png or .sfv file.  The full filename must be included on the Icon line in the .desktop file.  Here's a list of what has already been changed:&#xA;    &#xA;    FILENAME                                    CHANGE MADE&#xA;    Calculator                                  Icon=/home/unknowable/!everything else/Cursors and icons/Calculator.png&#xA;    Calendar                                    Icon=/home/unknowable/!everything else/Cursors and icons/calendar_420_-_2_-_dark.png&#xA;    Firefox Web Browser                         Icon=/home/unknowable/!everything else/Cursors and icons/Firefox.png&#xA;    VLC                                         Icon=/home/unknowable/!everything else/Cursors and icons/VLC media player.ico&#xA;    Terminal (io.elementary.terminal.desktop)   Icon=/home/unknowable/!everything else/Cursors and icons/command prompt.png&#xA;    PCSX2                                       Icon=/home/unknowable/!everything else/Cursors and icons/PS2_black_logo.png&#xA;    PCSXR                                       Icon=/home/unknowable/!everything else/Cursors and icons/PSX_02.png&#xA;    snes9x                                      Icon=/home/unknowable/!everything else/Cursors and icons/SNES_gamepad.png&#xA;    MAME                                        Icon=/home/unknowable/!everything else/Cursors and icons/Games.png - flatpak, icon on Plank Subdocks only&#xA;    WOEUSB                                      Icon=/home/unknowable/!everything else/Cursors and icons/drive_USB_thumbdrive.png&#xA;    &#xA;    The rest of the icons can be changed in System Settings -&amp;gt; Tweaks -&amp;gt; Appearance.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    25. INSTALL CURSORS&#xA;    &#xA;    Easiest way is to take what's already done and use that.  Copy &amp;quot;/home/unknowable/!everything else/System tools/linux/System tools/Cursors/Matrix Green with weed/&amp;quot; to /home/unknowable/.icons so you will now have a folder at /home/unknowable/.icons/Matrix Green with weed/ and it will have one folder in it named cursors along with &amp;quot;fileindex.theme&amp;quot;.  The folder should have a pack of cursors already setup.  After you copy the folder, go to System Settings -&amp;gt; Tweaks -&amp;gt; Appearance (selected by default) -&amp;gt; change the dropdown for Cursor to say &amp;quot;Matrix Green with weed&amp;quot;, then close Settings.  If you want to make a cursor set from scratch, you can start from what's listed in ~/!everything else/Cursors and icons/weed cursors for linux/ and use the following to create a complete set of weed cursors:&#xA;    &#xA;    GursorMaker:&#xA;    http://gursormaker.sourceforge.net&#xA;    http://gnome-look.org/content/show.php/Gursor+Maker?content=34031&#xA;    &#xA;    Cursor Create:&#xA;    https://github.com/isaacrobinson2000/CursorCreate/releases&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    26. INSTALL PCSXR, MAME, PCSX2,Snes9x (or bsnes), AND DOLPHIN (wii emu for Dragon's Lair)&#xA;    &#xA;    MAME and PCSXR can be installed using Synaptic.  To install PCSX2, the following page has full instructions, just scroll down to Ubuntu:&#xA;    https://github.com/PCSX2/pcsx2/wiki/Installing-on-Linux&#xA;    &#xA;    sudo dpkg --add-architecture i386&#xA;    &#xA;    &#xA;    NOTES BELOW IN ONLINE INSTRUCTIONS WERE NOT NECESSARY FOR ME&#xA;    _________________________________________&#xA;    Add the multiverse package repository.  Uncomment lines looking like this, where trusty is replaced by your Ubuntu version&#xA;    &#xA;    deb http://us.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;    deb-src http://us.archive.ubuntu.com/ubuntu/ trusty multiverse&#xA;    deb http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;    deb-src http://us.archive.ubuntu.com/ubuntu/ trusty-updates multiverse&#xA;    _________________________________________&#xA;    NOTES ABOVE IN ONLINE INSTRUCTIONS WERE NOT NECESSARY FOR ME&#xA;    &#xA;    &#xA;    sudo add-apt-repository ppa:gregory-hainaut/pcsx2.official.ppa&#xA;    sudo apt-get update&#xA;    sudo apt-get install pcsx2&#xA;    &#xA;    &#xA;    To install Snes9x first add flatpaks (even though you've already got flatpaks, you must do it for this flatpak):&#xA;    &#xA;    sudo flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&#xA;    &#xA;    Now get the flatpak and install:&#xA;    &#xA;    sudo wget https://flathub.org/repo/appstream/com.snes9x.Snes9x.flatpakref&#xA;    sudo flatpak install com.snes9x.Snes9x.flatpakref&#xA;    &#xA;    &#xA;    INSTALLING BSNES&#xA;    &#xA;    First install flatpak if you haven't already by now:&#xA;    &#xA;    sudo apt install flatpak&#xA;    &#xA;    The Flatpak plugin for the Software app makes it possible to install apps without needing the command line. To install, run:&#xA;    &#xA;    sudo apt install gnome-software-plugin-flatpak&#xA;    &#xA;    Add the flatpak repository:&#xA;    &#xA;    flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&#xA;    &#xA;    Then install the flatpak:&#xA;    &#xA;    flatpak install flathub dev.bsnes.bsnes&#xA;    &#xA;    And finally run it:&#xA;    &#xA;    flatpak run dev.bsnes.bsnes&#xA;    &#xA;    Don't forget, you can copy the .desktop link to the Games subfolder inside /Plank Subdocks.&#xA;    &#xA;    &#xA;    DOLPHIN&#xA;    &#xA;    Add the PPA:&#xA;    &#xA;    sudo apt-add-repository ppa:dolphin-emu/ppa&#xA;    sudo apt-get update --allow-unauthenticated --allow-insecure-repositories&#xA;    &#xA;    sudo apt install dolphin-emu&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    27.  CONVERT BIN TO ISO USING iat COMMANDS&#xA;    &#xA;    sudo apt-get install iat&#xA;    iat [source_file].bin [target_file].iso&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    28.  INSTALL UNETBOOTIN:&#xA;&#xA;EDITOR'S NOTE: UNETBOOTIN will only mount Linux iso's.  Also, it will only run from a sudo command line, and it wouldn't even search for USB drives.  It found root when I chose Hard Drive to install to, but it never found any USB drives.  Looks like dd is the way to go - see #19.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    29.  INSTALL MKV CODEC&#xA;    &#xA;    sudo apt-get -y install mkvtoolnix mkvtoolnix-gui&#xA;    &#xA;    After doing the above, VLC will still only try loading the audio (apparently) if you open ann MKV file from the file manager.  You would have to add it to the playlist, then play it from there.  That worked fine for me.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    30.  FORCE UPDATES FROM UNSIGNED REPOSITORIES&#xA;    &#xA;    You can set options in your sources.list located at /etc/apt/sources.list.  Just add [trusted=yes] right after the word deb in the sources.list:&#xA;    &#xA;    deb [trusted=yes] http://www.deb-multimedia.org jessie main&#xA;    &#xA;    The trusted option is what turns off the GPG check.  The easiest way to do that is this:&#xA;    &#xA;    cd /etc/apt/&#xA;    sudo nano sources.list&#xA;    &#xA;    After you've edited the file, hit Ctrl-O then Enter to save the file and Ctrl-X to exit nano.  You'll also need to edit anything missed in /etc/apt/sources.list.d/*.list.  If that gives you any issues, you can do the following:&#xA;    &#xA;    sudo apt-get update --allow-unauthenticated --allow-insecure-repositories&#xA;    &#xA;    &#xA;    &#xA;    I'm still getting the following after using the above command:&#xA;    &#xA;    E: Failed to fetch http://ppa.launchpad.net/dolphin-emu/ppa/ubuntu/dists/focal/main/binary-amd64/Packages  404  Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;    E: Failed to fetch http://ppa.launchpad.net/gregory-hainaut/pcsx2.official.ppa/ubuntu/dists/focal/main/binary-i386/Packages  404  Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;    E: Failed to fetch http://ppa.launchpad.net/versable/elementary-update/ubuntu/dists/focal/main/binary-i386/Packages  404  Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;    E: Failed to fetch http://ppa.launchpad.net/webupd8team/atom/ubuntu/dists/focal/main/binary-i386/Packages  404  Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;    E: Failed to fetch http://ppa.launchpad.net/webupd8team/nemo/ubuntu/dists/focal/main/binary-i386/Packages  404  Not Found [IP: 2001:67c:1560:8008::19 80]&#xA;    E: Some index files failed to download. They have been ignored, or old ones used instead.&#xA;    &#xA;    &#xA;    &#xA;    Also you can add the a flag in the desired repository entry in the sources.list like this:&#xA;    &#xA;    deb [allow-insecure=yes] http://www.deb-multimedia.org jessie main&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    31. BACK UP AND RESTORE THE HOME DIRECTORY ONLY:&#xA;    &#xA;    You can use the following command in a terminal to back up the home directory:&#xA;    &#xA;    sudo tar -cvf /media/unknowable/BACKUP/backup.tar /home/unknowable&#xA;    &#xA;    **Proper naming is crucial here take your time.&#xA;    This file will contain all the content of /home, and can be stored on for instance a USB disk.&#xA;    &#xA;    Once you have reinstalled 20.04 you can restore this with&#xA;    &#xA;    sudo -i&#xA;    cd /home/&#xA;    tar --exclude=.cache -xvf /media/unknowable/BACKUP/backup.tar&#xA;    &#xA;    In addition you may have to restore ownership of your home directory.&#xA;    &#xA;    sudo chown -R unknowable.unknowable /home/unknowable&#xA;    &#xA;    If you make a separate partition for /home (or you already have this) you can simply re-install 20.04, and use the old /home.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    32. AUTOMOUNT DRIVES&#xA;    &#xA;    https://www.youtube.com/watch?v=PmswUaf96ZA&#xA;    &#xA;    /dev/sdb2               c:\                     /media/unknowable/6E02767002763D61&#xA;    /dev/sdc1               3TB                     /media/unknowable/BACKUP&#xA;    /dev/sde1               2TB                     /media/unknowable/2TB&#xA;    &#xA;    &#xA;    df -h               lists all available MOUNTED drives&#xA;    lsblk -o NAME,HCTL,SIZE,MOUNTPOINT                  lists all drives with sizes and mountpoints&#xA;    sudo partprobe /dev/sdc1            not sure what this does.  Use the drive you're trying to mount, never seemed necessary later&#xA;    mkdir ~/3TB             make a directory for the new mountpoint&#xA;    sudo mount /dev/sdc1 ./3TB      mount the drive&#xA;    df -h               run this again to make sure it mounted properly&#xA;    sudo blkid          to get the UID of the drive - copy it to the clipboard&#xA;    sudo nano /etc/fstab                edit this file to automount&#xA;    ADD A SCRIPT FILE WITH THE FOLLOWING, THEN ADD TO STARTUP:&#xA;    sudo chown -R unknowable:unknowable /home/unknowable/3TB&#xA;    sudo chmod -R a+rwX /mnt/data&#xA;    &#xA;    mount /dev/sde1 next:&#xA;    /dev/sde1: LABEL=&amp;quot;2TB&amp;quot; UUID=&amp;quot;b12e7f86-9cb8-48be-a8a1-9971134da949&amp;quot; TYPE=&amp;quot;ext4&amp;quot; PARTUUID=&amp;quot;0000bdfc-01&amp;quot;&#xA;    IN /etc/fstab SHOULD BE:&#xA;    &#xA;    UUID=b12e7f86-9cb8-48be-a8a1-9971134da949   /home/unknowable/2TB    ext4    defaults,nofail 0   1&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    33.  REMOVE CONFIRMATION QUESTION ON SHUTDOWN&#xA;    &#xA;    You can disable the confirmation dialog like this:&#xA;    &#xA;    gsettings set org.gnome.SessionManager logout-prompt false&#xA;    &#xA;    This should cause the system to immediately reboot instead of shutting down.  If you want to revert the change, you can restore the original setting by changing false to true:&#xA;    &#xA;    gsettings set org.gnome.SessionManager logout-prompt true&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    34. AFTER ADDING MS WINDOWS, REBUILD OR REINSTALL GRUB, THEN EDIT GRUB.CFG&#xA;    &#xA;    Sorry, no direct info on rebuilding grub.  Check Firefox bookmarks for info on this.&#xA;    &#xA;    To edit the correct grub.cfg, open a terminal to /boot/grub and run:&#xA;    &#xA;    sudo nano ./grub.cfg&#xA;    &#xA;    There you can change the grub entries' titles and the default timeout.  When you're done hit Ctrl-O, Enter, Ctrl-X to save and exit.&#xA;    _________________________________________________________________________________________&#xA;    &#xA;    35. seems like that's it.  Install everything, including:&#xA;    &#xA;    NEMO File Manager&#xA;    Firefox&#xA;    Transmission&#xA;    VLC Media Player - to get version 4 (with dark mode,) add daily PPA's:&#xA;        sudo add-apt-repository ppa:videolan/master-daily&#xA;        sudo apt-get update --allow-unauthenticated --allow-insecure-repositories&#xA;        run Synaptic and choose Mark All Upgrades, then open VLC and adjust prefs&#xA;    Audacious - can use Winamp skins. Copy existing skins to /usr/share/audacious/Skins/&#xA;    Atom - (tabbed text editor) - sudo snap install atom --classic&#xA;    KDE Partition Manager&#xA;    Synaptic Package Manager - see #3&#xA;    Rainlendar&#xA;    Gdebi Package Manager&#xA;    GIMP&#xA;    plank --preferences&#xA;    handbrake&#xA;    Openshot Video Editor&#xA;    Easystroke - mouse gestures in X11&#xA;    Irfanview - sudo snap install irfanview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27382" LastEditorUserId="27382" LastEditDate="2021-12-17T17:50:38.737" LastActivityDate="2023-06-14T15:00:40.143" Title="LONG POST: Basic instructions on complete eOS setup and customization" Tags="|system-installation|settings|software-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29330" PostTypeId="2" ParentId="29329" CreationDate="2021-12-17T18:01:34.603" Score="1" Body="&lt;p&gt;Looks like it broke up the file I pasted, but it reads properly straight through.  You might want to copy the entire thing to a text editor so that you can get word wrap, which I couldn't get with the editor.&lt;/p&gt;&#xA;" OwnerUserId="27382" LastActivityDate="2021-12-17T18:01:34.603" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29331" PostTypeId="2" ParentId="10000" CreationDate="2021-12-18T02:16:21.860" Score="0" Body="&lt;p&gt;Running Odin [Built on Ubuntu 20.04.3 LTS] in demo mode on an ssd attached by usb-c on a macbook pro:&#xA;1× Intel® Core™ i5-6267U CPU @ 2.90GHz&lt;/p&gt;&#xA;&lt;p&gt;nomodeset did not work for me, but acpi=off works. I saw it in an ubuntu thread.  but it notes that this may disable certain critical functions like the fan.  Any info on acpi=off appreciated.&lt;/p&gt;&#xA;&lt;p&gt;Also worth noting: track pad and keyboard do not work, but mouse and keyboard connected by usb do work.&lt;/p&gt;&#xA;&lt;p&gt;Outside temperature is 95F at hottest spots.. do not hear fan.  Will keep checking temp.  Otherwise, no issue noted and laser razor fast.&lt;/p&gt;&#xA;&lt;p&gt;Using a usb dongle that connects by wifi to my left handed orbital trackball with scroll wheel.. and amazingly all of it works perfectly.&lt;/p&gt;&#xA;" OwnerUserId="16967" LastEditorUserId="16967" LastEditDate="2021-12-18T02:26:11.810" LastActivityDate="2021-12-18T02:26:11.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29332" PostTypeId="2" ParentId="29328" CreationDate="2021-12-18T06:57:54.517" Score="0" Body="&lt;p&gt;I can help you with the &lt;code&gt;elementary-tweaks&lt;/code&gt; issue, it won't work on Odin/Jólnir, you'll have to install &lt;code&gt;pantheon-tweaks&lt;/code&gt;. Here you can find how to install it: &lt;code&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-12-18T06:57:54.517" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="29336" PostTypeId="1" CreationDate="2021-12-19T10:50:28.027" Score="0" ViewCount="285" Body="&lt;p&gt;Did complete reinstall of Elementary OS 6.0 and so far so good.  After installing, upgrading, ...&#xA;all the necessary packages i was pretty content with it.&lt;/p&gt;&#xA;&lt;p&gt;Since last week Apt is mentioning that it can't find any repositories anymore, so no install via apt is possible anymore, which is pretty annoying.  I have been looking all over the internet to find a solution and tried even adding some other links to the sources.list but nothing helps.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;tim@Korafola:/etc$ cat /etc/lsb-release&#xA;DISTRIB_ID=elementary&#xA;DISTRIB_RELEASE=6&#xA;DISTRIB_CODENAME=odin&#xA;DISTRIB_DESCRIPTION=&amp;quot;elementary OS 6 Odin&amp;quot;&#xA;&#xA;tim@Korafola:/etc$ cat /etc/apt/sources.list&#xA;# deb cdrom:[elementary OS 6.0 _odin_ - stable amd64 (20211103)]/ focal contrib main non-free&#xA;#deb http://ftp.belnet.be/ubuntu/ trusty main restricted universe&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt precise main restricted universe multiverse&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt precise-updates main restricted universe multiverse&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt precise-backports main restricted universe multiverse&#xA;deb mirror://mirrors.ubuntu.com/mirrors.txt precise-security main restricted universe multiverse&#xA;&#xA;  tim@Korafola:/etc$ sudo apt update&#xA;Hit:1 http://ppa.launchpad.net/cappelikan/ppa/ubuntu focal InRelease&#xA;Hit:2 http://ppa.launchpad.net/elementary-os/stable/ubuntu focal InRelease&#xA;Get:3 http://mirrors.ubuntu.com/mirrors.txt Mirrorlist [102 B]&#xA;Hit:8 http://ppa.launchpad.net/linuxuprising/libpng12/ubuntu focal InRelease&#xA;Ign:6 http://mirror.unix-solutions.be/ubuntu precise-backports InRelease&#xA;Hit:9 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu focal InRelease&#xA;Hit:10 http://ppa.launchpad.net/quiterss/quiterss/ubuntu focal InRelease&#xA;Ign:6 http://ftp.belnet.be/ubuntu precise-backports InRelease&#xA;Hit:11 https://linux.teamviewer.com/deb stable InRelease&#xA;Ign:4 http://archive.ubuntu.com/ubuntu precise InRelease&#xA;Ign:5 http://archive.ubuntu.com/ubuntu precise-updates InRelease&#xA;Ign:7 http://archive.ubuntu.com/ubuntu precise-security InRelease&#xA;Ign:4 http://mirror.unix-solutions.be/ubuntu precise InRelease&#xA;Ign:6 http://archive.ubuntu.com/ubuntu precise-backports InRelease&#xA;Ign:4 http://ftp.belnet.be/ubuntu precise InRelease&#xA;Ign:5 http://mirror.unix-solutions.be/ubuntu precise-updates InRelease&#xA;Ign:5 http://ftp.belnet.be/ubuntu precise-updates InRelease&#xA;Ign:7 http://mirror.unix-solutions.be/ubuntu precise-security InRelease&#xA;Ign:12 http://archive.ubuntu.com/ubuntu precise-backports Release&#xA;Ign:7 http://ftp.belnet.be/ubuntu precise-security InRelease&#xA;Ign:13 http://mirror.unix-solutions.be/ubuntu precise Release&#xA;Ign:14 http://mirror.unix-solutions.be/ubuntu precise-updates Release&#xA;Ign:13 http://archive.ubuntu.com/ubuntu precise Release&#xA;Ign:12 http://mirror.unix-solutions.be/ubuntu precise-backports Release&#xA;Err:13 http://ftp.belnet.be/ubuntu precise Release&#xA;  404  Not Found [IP: 185.111.204.131 80]&#xA;Ign:15 http://archive.ubuntu.com/ubuntu precise-security Release&#xA;Err:12 http://ftp.belnet.be/ubuntu precise-backports Release&#xA;  404  Not Found [IP: 2001:67c:1360:8001::23 80]&#xA;Ign:14 http://archive.ubuntu.com/ubuntu precise-updates Release&#xA;Ign:15 http://ftp.belnet.be/ubuntu precise-security Release&#xA;Err:14 http://ftp.belnet.be/ubuntu precise-updates Release&#xA;  404  Not Found [IP: 185.111.204.131 80]&#xA;Err:15 http://mirror.unix-solutions.be/ubuntu precise-security Release&#xA;  404  Not Found [IP: 2001:67c:1360:8001::23 80]&#xA;Hit:16 https://brave-browser-apt-release.s3.brave.com stable InRelease&#xA;Reading package lists... Done&#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt precise Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt precise-backports Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt precise-updates Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt precise-security Release' does not have a Release file.&#xA;N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any help would be greatly appreciated.&lt;/p&gt;&#xA;" OwnerUserId="27647" LastActivityDate="2024-01-10T21:09:06.033" Title="Unable to do any install, upgrade, ... using apt" Tags="|apt|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29337" PostTypeId="2" ParentId="24873" CreationDate="2021-12-19T14:42:40.170" Score="0" Body="&lt;p&gt;In a multi-mode keyboard, there's a button to swap from Win to Mac layouts (Win/Mac).&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Win's, the &lt;kbd&gt;Super&lt;/kbd&gt; key is to the &lt;em&gt;left&lt;/em&gt; of the &lt;kbd&gt;Alt&lt;/kbd&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In Mac's, the &lt;kbd&gt;Alt&lt;/kbd&gt; (&lt;kbd&gt;Option&lt;/kbd&gt;) key  is to &lt;em&gt;left&lt;/em&gt; of the &lt;kbd&gt;Super&lt;/kbd&gt; (&lt;kbd&gt;Command&lt;/kbd&gt;).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;These keys are swapped in the design of actual keyboards, so probably you've changed this configuration by accident.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;&lt;strong&gt;Solution&lt;/strong&gt;: Look up how to change from one layout to another in the manual of your multi-mode keyboard.&lt;/p&gt;&#xA;&lt;p&gt;In my case, I was using a RAPOO 8050T and  reverted back to &lt;kbd&gt;Win&lt;/kbd&gt;'s by pressing &lt;kbd&gt;Fn&lt;/kbd&gt;+&lt;kbd&gt;Ins&lt;/kbd&gt;. Now &lt;kbd&gt;Super&lt;/kbd&gt; and &lt;kbd&gt;Alt&lt;/kbd&gt; are mapped to the correct keys.&lt;/p&gt;&#xA;" OwnerUserId="27649" LastEditorUserId="27649" LastEditDate="2021-12-19T14:53:42.633" LastActivityDate="2021-12-19T14:53:42.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29338" PostTypeId="1" CreationDate="2021-12-19T18:22:17.933" Score="1" ViewCount="201" Body="&lt;p&gt;If I run &lt;code&gt;notify-send --icon=address-book-new &amp;quot;My notification&amp;quot;&lt;/code&gt; the notification that comes up has an &amp;quot;info&amp;quot; icon:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CGJPZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CGJPZ.png&quot; alt=&quot;Notification&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And if I look at the notification in the notification popover, the notification has the right icon:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gyRkV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gyRkV.png&quot; alt=&quot;Notification in notification popover&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How can I make it so the icon I specify is shown when the notification is first displayed, and not only when I view the notification popover?&lt;/p&gt;&#xA;" OwnerUserId="27554" LastEditorUserId="27554" LastEditDate="2021-12-19T18:29:49.217" LastActivityDate="2021-12-19T18:29:49.217" Title="How do I display an icon with `notify-send`?" Tags="|release-odin|icons|notifications|bash|script|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29341" PostTypeId="1" CreationDate="2021-12-19T21:46:12.690" Score="0" ViewCount="36" Body="&lt;p&gt;I have tried to download the iso from the home page in both brave and firefox, Ubuntu and Windows and the button will not do anything, either paid or custom.&lt;/p&gt;&#xA;" OwnerUserId="27655" LastActivityDate="2024-03-25T22:04:15.583" Title="Can't download from home page" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29344" PostTypeId="2" ParentId="29336" CreationDate="2021-12-20T07:53:16.613" Score="0" Body="&lt;p&gt;Odin is based on Ubuntu Focal (20.04) but for some reason you have Precise repos added to the system (which is I believe Ubuntu 12.04).&lt;/p&gt;&#xA;&lt;p&gt;Remove all references to Precise in &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT:&lt;/p&gt;&#xA;&lt;p&gt;This is my &lt;code&gt;/etc/apt/sources.list&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb http://archive.ubuntu.com/ubuntu/ focal main restricted universe multiverse&#xA;deb-src http://archive.ubuntu.com/ubuntu/ focal main restricted universe multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ focal-updates main restricted universe multiverse&#xA;deb-src http://archive.ubuntu.com/ubuntu/ focal-updates main restricted universe multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse&#xA;deb-src http://archive.ubuntu.com/ubuntu/ focal-security main restricted universe multiverse&#xA;deb http://archive.canonical.com/ubuntu focal partner&#xA;deb-src http://archive.canonical.com/ubuntu focal partner&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerDisplayName="user26849" LastEditorDisplayName="user26849" LastEditDate="2021-12-21T14:07:48.227" LastActivityDate="2021-12-21T14:07:48.227" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29349" PostTypeId="1" CreationDate="2021-12-21T01:56:52.233" Score="0" ViewCount="135" Body="&lt;p&gt;first-time Elementary user struggling to diagnose an install failure.&lt;/p&gt;&#xA;&lt;p&gt;Following standard instructions on &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt; - Checksum hash is fine; and I can boot from the USB and use the demo.&lt;/p&gt;&#xA;&lt;p&gt;When I try to do a full install, the installer appears to run without issues, then reboots into a black screen with a partially visible [OK] Passed notice in the top-left corner.&lt;/p&gt;&#xA;&lt;p&gt;After waiting 30 minutes, powered off the machine and removed USB stick.&lt;/p&gt;&#xA;&lt;p&gt;Tried rebooting the machine, and after the start-up chime, I get a rainbow of graphics failure in a very small part of the top-left of the screen.&lt;/p&gt;&#xA;&lt;p&gt;Your help would be appreciated!&lt;/p&gt;&#xA;" OwnerUserId="27662" LastActivityDate="2024-01-06T18:03:40.427" Title="Can't do full install (Jolnir 6.1 / Macbook Pro hardware)" Tags="|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29350" PostTypeId="1" AcceptedAnswerId="29351" CreationDate="2021-12-21T10:37:59.610" Score="0" ViewCount="177" Body="&lt;p&gt;I only just started being comfortable with my EOS 6 Odin... and I see that 6.1 Jolnir is available.&lt;/p&gt;&#xA;&lt;p&gt;What is not clear to me: how do I update existing Odin installation to Jolnir?&#xA;or do I need to &amp;quot;update&amp;quot; my Odin at all?&lt;/p&gt;&#xA;&lt;p&gt;Most (all) instructions on the web seem to concentrate on new downloaders, I couldn't find anything about upgrading from 6 to 6.1 ??&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-12-21T11:22:04.137" Title="How to update from Odin to Jolnir" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29351" PostTypeId="2" ParentId="29350" CreationDate="2021-12-21T11:22:04.137" Score="0" Body="&lt;p&gt;According to &lt;a href=&quot;https://github.com/elementary/os/wiki/elementary-OS-6.1-J%C3%B3lnir-FAQ&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt;, the only thing you need to do is update from AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="25864" LastActivityDate="2021-12-21T11:22:04.137" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29352" PostTypeId="2" ParentId="28672" CreationDate="2021-12-21T11:28:27.217" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21455/hibernation-on-elementaryos#21915&quot;&gt;This&lt;/a&gt; worked for me. But i am still looking to find a way, to get in hibernation without Terminal.&#xA;Also it seems like Hibernation is deactivatet in Ubuntu because it will not work with secure boot.&lt;/p&gt;&#xA;" OwnerUserId="27663" LastEditorUserId="27663" LastEditDate="2021-12-21T11:42:21.163" LastActivityDate="2021-12-21T11:42:21.163" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29354" PostTypeId="1" CreationDate="2021-12-21T18:49:37.570" Score="0" ViewCount="140" Body="&lt;p&gt;My printer doesn't work. It appears in the settings but I can't delete it:&lt;br /&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/OZPHT.gif&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OZPHT.gif&quot; alt=&quot;trying to add&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If I try to add it again nothings happens.&lt;/p&gt;&#xA;&lt;p&gt;Any idea how to make it work?&lt;/p&gt;&#xA;" OwnerUserId="27671" LastEditorUserId="27671" LastEditDate="2021-12-21T22:03:22.700" LastActivityDate="2024-01-16T14:01:00.137" Title="Can't delete printer or add a new one" Tags="|printer|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29357" PostTypeId="1" AcceptedAnswerId="30248" CreationDate="2021-12-22T02:28:15.743" Score="1" ViewCount="424" Body="&lt;p&gt;I installed elementary os and opted for Dark theme, but when I install an app through flathub or when I install a .deb (chrome for example) the title bar and other things are like the light theme, I want to know if there is a way to change this bar to dark, as it is not interesting to mix dark and light.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/cbJqn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cbJqn.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;note that chrome itself allows a change of theme, but the system bar remains light&lt;/p&gt;&#xA;" OwnerUserId="18654" LastActivityDate="2023-07-21T00:21:24.603" Title="Title bar light but the theme is dark" Tags="|themes|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29362" PostTypeId="2" ParentId="25774" CreationDate="2021-12-22T11:38:41.927" Score="2" Body="&lt;p&gt;I had the same problem. My solution was to install pavucontrol with&#xA;&lt;code&gt;sudo apt install pavucontrol&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;With this program, you can change the audio configuration of your headset to A2DP easily.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xptzF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xptzF.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="24605" LastActivityDate="2021-12-22T11:38:41.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29363" PostTypeId="1" CreationDate="2021-12-22T12:57:02.890" Score="1" ViewCount="54" Body="&lt;p&gt;For me this new alt+tab is less productive since I constantly have to check what is inside another window while having one window fixed on the top of the workspace. Is it possible to have it back? Elementary OS have always been unique in many ways and made me more productive than on any other distro, but this brings it close to the level of almost any other distro I can think of.&lt;/p&gt;&#xA;" OwnerUserId="27676" LastActivityDate="2021-12-25T11:06:41.493" Title="Can I get back to the old alt+tab switcher in Jólnir?" Tags="|window-management|window-manager|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29364" PostTypeId="1" AcceptedAnswerId="29375" CreationDate="2021-12-22T16:53:28.627" Score="0" ViewCount="70" Body="&lt;p&gt;I have lost count of times I have accidentally removed an icon from the dock by being a &amp;quot;bit too fast/sloppy&amp;quot; with my mouse movement (swiping an icon away from the dock removes it from the dock). It is beginning to irritate me :-)&#xA;Is it possible &amp;quot;to lock&amp;quot; the the icons in the dock (and/or only allow removing of them by mouse's right click action) ???&#xA;Please :-)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-12-23T07:29:28.480" Title="Can I &quot;lock&quot; icons in the dock?" Tags="|plank|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29365" PostTypeId="1" CreationDate="2021-12-22T17:53:27.597" Score="0" ViewCount="928" Body="&lt;p&gt;I tried to install elementary-tweaks to change some of the themes in Elementary OS 6.1.  Method I used must not work for 6.1 or I do not fully understand how to implement it yet.  Now when Install anything I get the following message.&lt;/p&gt;&#xA;&lt;p&gt;To fix i tried running &amp;quot;sudo apt-get clean &amp;amp;&amp;amp; sudo apt-get -f install&amp;quot;, but I get the same message when trying to install again.  Anyway to remove this package so I can install again?&lt;/p&gt;&#xA;&lt;p&gt;Appreciate the help!&lt;/p&gt;&#xA;&lt;p&gt;ThinkPadT430:~$ sudo apt install&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br /&gt;&#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA;elementary-tweaks : Depends: libgranite5 (&amp;gt;= 0.2.0) but it is not installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;ThinkPadT430:~$ sudo apt-get clean &amp;amp;&amp;amp; sudo apt-get -f install&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br /&gt;&#xA;Reading state information... Done&#xA;Correcting dependencies... Done&#xA;The following additional packages will be installed:&#xA;libgranite5&#xA;The following NEW packages will be installed:&#xA;libgranite5&#xA;0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.&#xA;1 not fully installed or removed.&#xA;Need to get 167 kB of archives.&#xA;After this operation, 650 kB of additional disk space will be used.&#xA;Do you want to continue? [Y/n] y&#xA;Get:1 &lt;a href=&quot;http://mirrors.ubuntu.com/mirrors.txt&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://mirrors.ubuntu.com/mirrors.txt&lt;/a&gt; Mirrorlist [3,335 B]&#xA;Get:2 &lt;a href=&quot;http://archive.ubuntu.com/ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://archive.ubuntu.com/ubuntu&lt;/a&gt; focal/universe amd64 libgranite5 amd64 5.3.0-1 [167 kB]&#xA;Fetched 170 kB in 1s (125 kB/s)&lt;br /&gt;&#xA;(Reading database ... 112490 files and directories currently installed.)&#xA;Preparing to unpack .../libgranite5_5.3.0-1_amd64.deb ...&#xA;Unpacking libgranite5:amd64 (5.3.0-1) ...&#xA;dpkg: error processing archive /var/cache/apt/archives/libgranite5_5.3.0-1_amd64.deb (--unpack):&#xA;trying to overwrite '/usr/share/metainfo/granite.appdata.xml', which is also in package libgranite-common 6.2.0+r2223+pkg122~ubuntu6.1&#xA;Errors were encountered while processing:&#xA;/var/cache/apt/archives/libgranite5_5.3.0-1_amd64.deb&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&#xA;ThinkPadT430:~$ sudo apt install&#xA;Reading package lists... Done&#xA;Building dependency tree&lt;br /&gt;&#xA;Reading state information... Done&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA;elementary-tweaks : Depends: libgranite5 (&amp;gt;= 0.2.0) but it is not installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&lt;/p&gt;&#xA;" OwnerUserId="27677" LastActivityDate="2024-03-21T19:00:45.073" Title="The following packages have unmet dependencies: elementary-tweaks" Tags="|package|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29366" PostTypeId="2" ParentId="29365" CreationDate="2021-12-22T17:59:03.453" Score="0" Body="&lt;p&gt;After sharpening my search skills I found the below solved my issue!&lt;/p&gt;&#xA;&lt;p&gt;sudo apt remove elementary-tweaks&lt;/p&gt;&#xA;" OwnerUserId="27677" LastActivityDate="2021-12-22T17:59:03.453" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29367" PostTypeId="2" ParentId="29313" CreationDate="2021-12-22T20:44:17.147" Score="2" Body="&lt;p&gt;You can bypass this error by updating/upgrading through the terminal instead of AppCenter.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# downloads package info from all configured sources&#xA;$ sudo apt-get update&#xA;&#xA;# upgrades all installed packages from the command above to their latest versions&#xA;$ sudo apt-get full-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;apt-get full-upgrade&lt;/code&gt; is the same as &lt;code&gt;apt-get upgrade&lt;/code&gt; but will also remove packages that are preventing the system from completing the upgrade -- which is what you want.&lt;/p&gt;&#xA;&lt;p&gt;In my case, running &amp;quot;full-upgrade&amp;quot; removed &lt;code&gt;libpantheon-files-widgets0&lt;/code&gt; and installed the compatible &lt;code&gt;libpantheon-files-core0&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;After running both &lt;code&gt;apt-get&lt;/code&gt; commands, if you still have AppCenter open, make sure you close out of it completely. The next time you navigate to AppCenter you will notice the previous Operating System Updates is now up-to-date and that there are no components in need of updates.&lt;/p&gt;&#xA;&lt;p&gt;You can also confirm successful upgrade through the terminal by running the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ lsb_release -a&#xA;&#xA;# No LSB modules are available.&#xA;# Distributor ID: Elementary&#xA;# Description:    elementary OS 6.1 Jolnir&#xA;# Release:        6.1&#xA;# Codename:       Jolnir&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27678" LastActivityDate="2021-12-22T20:44:17.147" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29368" PostTypeId="2" ParentId="28014" CreationDate="2021-12-22T22:08:24.630" Score="0" Body="&lt;p&gt;You need to initialize libhany by invoking &lt;a href=&quot;https://valadoc.org/libhandy-1/Hdy.init.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Hdy.init() function&lt;/a&gt;. You can actually see examples of this in all three pull requests to the 1st party elementary apps you linked to in the question.&lt;/p&gt;&#xA;" OwnerUserId="27681" LastActivityDate="2021-12-22T22:08:24.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29370" PostTypeId="2" ParentId="29130" CreationDate="2021-12-23T02:04:43.363" Score="1" Body="&lt;p&gt;I opened a terminal console and ran:&#xA;sudo apt install ubiquiti&#xA;Then:&#xA;ubiquity -b&#xA;I managed to run the installation and was able to boot it but it throws a problem with the password. It does not recognize the password, even though it is typed correctly. I guess it must be because I used ubiquiti as installer.&lt;/p&gt;&#xA;&lt;p&gt;If someone knows what is the modifier of io.elementary.installer to install it without the bootloader would be very useful.&lt;/p&gt;&#xA;&lt;p&gt;Translated with &lt;a href=&quot;http://www.DeepL.com/Translator&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.DeepL.com/Translator&lt;/a&gt; (free version)&lt;/p&gt;&#xA;" OwnerUserId="27683" LastActivityDate="2021-12-23T02:04:43.363" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29374" PostTypeId="2" ParentId="25282" CreationDate="2021-12-23T06:50:04.117" Score="0" Body="&lt;p&gt;I think the simple way is to edit simple &lt;strong&gt;/etc/apt/sources.list.d/jellyfin.list&lt;/strong&gt; and add the specific ubuntu-version name 'bionic or focal&amp;quot; according the version of Elementary is running.&#xA;Then the sources update allow to find jellyfin package like a charm.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;deb [arch=amd64] https://repo.jellyfin.org/ubuntu bionic main&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;OR&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;deb [arch=amd64] https://repo.jellyfin.org/ubuntu focal main&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;PS: Elementary latest versions according to Ubuntu versions like:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;5.1 (Hera) ==========&amp;gt; Ubuntu 18.04 (bionic)&lt;/li&gt;&#xA;&lt;li&gt;6.0 (Odin) ==========&amp;gt; Ubuntu 20.04 (focal)&lt;/li&gt;&#xA;&lt;li&gt;6.1 (Jolnir) ==========&amp;gt; Ubuntu 20.04 (focal)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="27685" LastActivityDate="2021-12-23T06:50:04.117" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29375" PostTypeId="2" ParentId="29364" CreationDate="2021-12-23T07:29:28.480" Score="0" Body="&lt;p&gt;Ctrl + Right click on Plank opens a menu. There you can find Preferences -&amp;gt; Behaviour -&amp;gt; Lock Icons and select it.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2021-12-23T07:29:28.480" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29377" PostTypeId="1" CreationDate="2021-12-23T09:51:02.633" Score="0" ViewCount="128" Body="&lt;p&gt;How do you make this task bar not overlap on applications. I have a 4 in one Monitor and when I try and work with a window in the middle of the screen, the task bar overlaps and wont go away. I have tried changing the default monitor to top left but that didn't work.&#xA;I Am using Elementry OS 6.1 Jolnr&lt;/p&gt;&#xA;&lt;p&gt;Any help would be appreciated.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ztmu0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ztmu0.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27689" LastActivityDate="2024-01-13T01:05:50.670" Title="Love Elementry OS But the task bar is a problem" Tags="|settings|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29380" PostTypeId="1" CreationDate="2021-12-23T13:26:52.480" Score="0" ViewCount="75" Body="&lt;p&gt;I wanted the facility to have icons on the desktop. The solutions I've read so far all involve downloading a utility from the App Center called Desktop Folders. It seems that utility is not available for the version of Elementary I have (6.1 Jólnir). Please help. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="27694" LastActivityDate="2024-01-13T19:05:45.610" Title="Desktop icons without &quot;Desktop Folders&quot;" Tags="|desktop|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29381" PostTypeId="2" ParentId="29377" CreationDate="2021-12-23T18:03:16.833" Score="0" Body="&lt;p&gt;they are very careful in some points and very relaxed in others in the same proportion, unfortunately the system is full of problems like this and will probably never be solved.&#xA;I would say the system as a whole is a &amp;quot;premium&amp;quot; beta.&lt;/p&gt;&#xA;" OwnerUserId="18654" LastActivityDate="2021-12-23T18:03:16.833" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29383" PostTypeId="1" CreationDate="2021-12-23T18:49:22.037" Score="0" ViewCount="68" Body="&lt;p&gt;I've been working on a GTK4 app and was wondering if I could publish it on the AppCenter&lt;/p&gt;&#xA;&lt;p&gt;The &lt;a href=&quot;https://github.com/elementary/houston/wiki/Before-You-Publish#native-front-end&quot; rel=&quot;nofollow noreferrer&quot;&gt;official documentation&lt;/a&gt; doesn't seem to say anything about GTK4 specifically, only that it must be &amp;quot;native&amp;quot;. Would that include GTK4?&lt;/p&gt;&#xA;" OwnerUserId="27700" LastActivityDate="2024-03-22T14:01:40.190" Title="Publishing GTK4 apps on AppCenter?" Tags="|appcenter|development|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29385" PostTypeId="1" CreationDate="2021-12-24T00:04:43.530" Score="0" ViewCount="340" Body="&lt;p&gt;Is it possible to install elementary OS on a flash drive without loading a bootloader for a Mac?&lt;/p&gt;&#xA;&lt;p&gt;Create a live drive with the latest version of elementary. I proceeded to form another drive with 200 mb for an EFI partition and the rest for an ext4 with root.&lt;/p&gt;&#xA;&lt;p&gt;Since I did not find in the new installer io.elementary.installer the option to not install bootloader, I opened a terminal console and ran:&lt;/p&gt;&#xA;&lt;p&gt;sudo apt get ubiquity&lt;/p&gt;&#xA;&lt;p&gt;Then I ran the ubiquity as installer with the no bootloader option&lt;/p&gt;&#xA;&lt;p&gt;ubiquity -b&lt;/p&gt;&#xA;&lt;p&gt;I managed to install elementary completely on my USB and then I installed refind on the EFI partition following this procedure:&lt;/p&gt;&#xA;&lt;p&gt;We will be using a super awesome 3rd party boot manager rEFInd. It can detect any operating systems installed in EFI mode and boot them.&lt;/p&gt;&#xA;&lt;p&gt;Download rEFInd zip and extract it&#xA;Open Terminal and navigate to rEFInd directory&#xA;Run diskutil list and find the name of your flash drive’s EFI partition. (In my case /dev/disk2s1)&#xA;Run ./refind-install --usedefault /dev/diskXXX (replace XXX with appropriate name)&lt;/p&gt;&#xA;&lt;p&gt;Then I rebooted and pressed the option key to boot the efi drive which ran the refind and I was able to boot the system, but I always got the password error. I repeated the process several times and it always gave a password error. It was not the keyboard layout, I even tried with the on screen keyboard.&lt;/p&gt;&#xA;&lt;p&gt;Is there any way to install and boot an elementary OS on a Mac flash drive or should I move to Ubuntu?&lt;/p&gt;&#xA;&lt;p&gt;I'm not talking about lives with persistence&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="27683" LastActivityDate="2024-01-16T04:06:50.800" Title="Installing Elementary OS USB full install without a boot loader" Tags="|macbook|usb|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29386" PostTypeId="2" ParentId="29380" CreationDate="2021-12-24T15:24:59.343" Score="0" Body="&lt;p&gt;You can always ask the developer to port the app to elementary OS 6 here: &lt;a href=&quot;https://github.com/spheras/desktopfolder/issues&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/spheras/desktopfolder/issues&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Sadly, it seems like the developer is inactive and the project was abandoned.&lt;/p&gt;&#xA;" OwnerUserId="27704" LastActivityDate="2021-12-24T15:24:59.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29395" PostTypeId="2" ParentId="17989" CreationDate="2021-12-26T19:37:58.420" Score="1" Body="&lt;p&gt;I just ran into this on elementary OS 6.1, so the issue still remains 2.5 years after this question was asked.&lt;/p&gt;&#xA;&lt;p&gt;One thing I noticed was that if I add my user to the &lt;code&gt;lpadmin&lt;/code&gt; group then I can at least print. The printer still shows as Disabled in the System Settings Printers tool though.&lt;/p&gt;&#xA;&lt;p&gt;To add yourself to the lpadmin group just do the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo adduser &amp;lt;YOURNAME&amp;gt; lpadmin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;where &lt;code&gt;&amp;lt;YOURNAME&amp;gt;&lt;/code&gt; is you account name. You then need to log out and back in again.&lt;/p&gt;&#xA;&lt;p&gt;Using the CUPS web interface (&lt;code&gt;localhost:631&lt;/code&gt;) I can manage the printer just fine after making this change too.&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2021-12-26T19:37:58.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29396" PostTypeId="2" ParentId="25983" CreationDate="2021-12-26T21:10:24.583" Score="0" Body="&lt;p&gt;The following worked for &lt;a href=&quot;https://github.com/xournalpp/xournalpp&quot; rel=&quot;nofollow noreferrer&quot;&gt;Xournal++&lt;/a&gt;, so there is a chance it will work for other apps too:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install org.gtk.Gtk3theme.Adwaita-dark&#xA;sudo flatpak override --env=GTK_THEME=Adwaita-dark com.github.xournalpp.xournalpp&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can change &lt;code&gt;com.github.xournalpp.xournalpp&lt;/code&gt; to the app you are trying to change to dark mode. You can also change &lt;code&gt;Adwaita-dark&lt;/code&gt; to any theme you like – you can see the list of available themes using the following command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak remote-ls flathub | grep org.gtk.Gtk3theme&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="19079" LastActivityDate="2021-12-26T21:10:24.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29397" PostTypeId="2" ParentId="29385" CreationDate="2021-12-26T22:03:02.703" Score="0" Body="&lt;p&gt;I don't have an answer, but I am trying to accomplish same thing you are on a 2016 macbook.&lt;/p&gt;&#xA;&lt;p&gt;Did you use etcher to create the elementary install drive?  If so, you might try creating one with unetbootin.&lt;/p&gt;&#xA;" OwnerUserId="16967" LastActivityDate="2021-12-26T22:03:02.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29401" PostTypeId="2" ParentId="29354" CreationDate="2021-12-27T07:59:55.050" Score="0" Body="&lt;p&gt;I had a similar problem. Since eos uses CUPS for printing if you check cupsd (browse to http://localhost:631 is one way) you should see the printers that are installed. You can add/change/delete printers from this interface as well. Once I made some changes (deleted multiple installs of home printer) the standard printer window was updated.&lt;/p&gt;&#xA;" OwnerUserId="27717" LastActivityDate="2021-12-27T07:59:55.050" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29404" PostTypeId="1" CreationDate="2021-12-27T19:02:43.350" Score="0" ViewCount="20" Body="&lt;p&gt;I use ElementaryOS 5.1. I first noticed the problem with Liferea, then with Libreoffice. Other applications (like Firefox and Thunderbird and the terminal) work fine.&lt;/p&gt;&#xA;&lt;p&gt;The problem is:&#xA;When I open the application (e.g. Liferea) it opens somewhere in the far right where I cannot reach it. I use the windows button + arrow key right to go to the next workspace screen. There is always a last, empty screen. When I reach that and still click Windows button + arrow right, I see that there is another window which shows my application. But I don't know how to reach that.&lt;/p&gt;&#xA;&lt;p&gt;I do have two screens connected to my tower, but I only use one. I suspected a problem with the second one, so I disabled it in the settings. Now it's disabled and the problem is still there.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastActivityDate="2024-01-19T17:03:55.450" Title="Window opens outside of workspaces" Tags="|release-hera|applications|window-management|window-manager|workspace|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29405" PostTypeId="2" ParentId="27849" CreationDate="2021-12-27T19:06:10.170" Score="0" Body="&lt;p&gt;I &amp;quot;solved&amp;quot; this problem by using a different printer setting. Instead of using what was offered via PlugnPlay, I manual did the &amp;quot;add printer&amp;quot; thing and used a driverless setting. It worked then. No idea why. But I thought I should post that in case it helps someone else.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastActivityDate="2021-12-27T19:06:10.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29407" PostTypeId="2" ParentId="25394" CreationDate="2021-12-28T06:36:05.123" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/sileshn/ElementaryWSL&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/sileshn/ElementaryWSL&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Am going to try that for Elementary 6.1 on Win11 WSL2&lt;/p&gt;&#xA;&lt;p&gt;Although installing pantheon on WSL2 Ubuntu seems the easier compared to this or creating elementary as a custom WSL2 distro&lt;/p&gt;&#xA;&lt;p&gt;EDIT / UPDATE:&lt;/p&gt;&#xA;&lt;p&gt;That works flawlessly. The last updated github stuff of Sailesh i mean.&lt;/p&gt;&#xA;&lt;p&gt;Unzip and run elementary.exe OR do wsl --import thing. It's got Elementary 6. You have to apt install any stuff you need.&lt;/p&gt;&#xA;&lt;p&gt;Will try installing gui/desktop similar to how its working for ubuntu.&lt;/p&gt;&#xA;&lt;p&gt;Though TBH i guess MS has made both WSL &amp;amp; WSA in a way that we will start using any required Android/Linux apps just on the normal windows 11 desktop and slowly forget any Linux desktop or Android Launcher/Desktop/Home-Screen !&lt;/p&gt;&#xA;&lt;p&gt;Though i have both with gui desktops, the desktop/launcher is actually only needed when you want to configure any stuff or just generally to check / explore stuff.&lt;/p&gt;&#xA;&lt;p&gt;The very few apps i need from android &amp;amp; linux are better run just directly.&lt;/p&gt;&#xA;" OwnerUserId="27721" LastEditorUserId="27721" LastEditDate="2022-02-05T07:10:31.493" LastActivityDate="2022-02-05T07:10:31.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29409" PostTypeId="1" CreationDate="2021-12-29T13:51:59.190" Score="0" ViewCount="39" Body="&lt;p&gt;I'm on elementary OS 6.1 and I recently tried to download csgo to test out performance compared to windows, I had Left 4 dead 2 installed before that and during the download I realized there wasn't enough space so i stopped the download and extended the partition size.&lt;/p&gt;&#xA;&lt;p&gt;Anyway, the download said there was no disk space when it was at 50% with more than enough space so I deleted the download files and restarted the download. After that I was just chilling on my computer and I checked my disk and it was full to the dot, it said &amp;quot;0 bytes left&amp;quot; and I was confused to why this happened. I tried looking for the csgo files thinking maybe they didnt get deleted after uninstlling the game, but there weren't any files.&lt;/p&gt;&#xA;&lt;p&gt;I restarted my computer thinking it could resolve the issue but I got locked out of the desktop so I moved some files through a live boot to access it and now I don't know what to do.&lt;/p&gt;&#xA;&lt;p&gt;Edit: here's something weird I found when I was checking the properties of each file in the file system:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EavRK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EavRK.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27730" LastEditorUserId="27730" LastEditDate="2021-12-29T14:38:25.783" LastActivityDate="2022-01-28T16:06:00.567" Title="full disk problem" Tags="|disk-management|disk|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29414" PostTypeId="1" CreationDate="2021-12-30T02:18:43.197" Score="0" ViewCount="45" Body="&lt;p&gt;Guys.&lt;/p&gt;&#xA;&lt;p&gt;I have Haylou GT1 Plus and it works fine on OS 6.1. However, everytime I turn my bluetooth off or disconnect my earbuds and try to connect them again later, I need to remove them in the Bluetooth settings to be able to pair. When I do not remove the device in the system settings, they connect but are mute. This bug also happens when I try to use Blueman.&lt;/p&gt;&#xA;&lt;p&gt;Any know/suggested solution?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;&lt;p&gt;Best,&lt;/p&gt;&#xA;" OwnerUserId="27690" LastActivityDate="2024-01-20T15:01:15.110" Title="I need to remove my bluetooth device everytime I want to connect" Tags="|drivers|bluetooth|release-odin|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29415" PostTypeId="1" CreationDate="2021-12-30T02:30:19.520" Score="0" ViewCount="283" Body="&lt;p&gt;I can't update software&lt;/p&gt;&#xA;&lt;p&gt;This is error messsage&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;E: http://mirrors.ubuntu.com/mirrors.txt Mirrorlist is not (yet) available (Could not connect to mirrors.ubuntu.com:80 (91.189.89.32), connection timed out) &#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt focal Release' no longer has a Release file. W: Updating from such a repository can't be done securely, and is therefore disabled by default. W: See apt-secure(8) manpage for repository creation and user configuration details. &#xA;E: mirror://mirrors.ubuntu.com/mirrors.txt focal Release is not (yet) available (Downloading mirror file failed) &#xA;E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt focal-updates Release' no longer has a Release file. W: Updating from such a repository can't be done securely, and is therefore disabled by default. W: See apt-secure(8) manpage for repository creation and user configuration details. &#xA;E: mirror://mirrors.ubuntu.com/mirrors.txt focal-updates Release is not (yet) available&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27735" LastEditorUserId="27735" LastEditDate="2022-01-01T00:08:57.150" LastActivityDate="2024-01-28T13:08:26.003" Title="Check for Updates (ElementaryOS 6.1)" Tags="|updates|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29416" PostTypeId="2" ParentId="29415" CreationDate="2021-12-30T08:10:36.227" Score="0" Body="&lt;p&gt;Strange but seems to happen. Have a look:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://itectec.com/ubuntu/ubuntu-making-mirror-mirrors-ubuntu-com-highly-available/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itectec.com/ubuntu/ubuntu-making-mirror-mirrors-ubuntu-com-highly-available/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Or more directly see if you replace the path with a file from this list matching your country:&#xA;&lt;a href=&quot;http://mirrors.ubuntu.com/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://mirrors.ubuntu.com/&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27733" LastActivityDate="2021-12-30T08:10:36.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29418" PostTypeId="2" ParentId="29404" CreationDate="2021-12-30T12:19:17.963" Score="0" Body="&lt;p&gt;It seems that indeed the problem was the second screen. Disabling it while the computer was running did not change anything and on restart the second screen was enabled again.&#xA;So I disconnected the cable to the second screen and restarted the computer - et volià, I see the applications on my screen.&lt;/p&gt;&#xA;&lt;p&gt;Lessons learned: Don't have a second screen connected that you don't want to use anyway.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastActivityDate="2021-12-30T12:19:17.963" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29420" PostTypeId="2" ParentId="26324" CreationDate="2021-12-30T18:39:36.130" Score="0" Body="&lt;p&gt;6 month later, I am now on Elementary 6.1 Jolnir and it still crashes with monotonous regularity. The only thing I have found that gives me some hope is to disable hardware acceleration, see:&#xA;&lt;a href=&quot;https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems&lt;/a&gt;&#xA;I think it is worth trying. Please report if it made any difference?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2021-12-30T18:39:36.130" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29421" PostTypeId="2" ParentId="26108" CreationDate="2021-12-31T10:39:39.063" Score="0" Body="&lt;p&gt;Yes it's normal, a number of users are experiencing this issue since the start of November. It's nothing major, just a bug which the elementary team hopefully fixes quick.&lt;/p&gt;&#xA;" OwnerUserId="27716" LastActivityDate="2021-12-31T10:39:39.063" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29422" PostTypeId="2" ParentId="29414" CreationDate="2021-12-31T10:44:43.097" Score="0" Body="&lt;p&gt;Frankly speaking, elementary os is not really an ideal distro which you would use to get a seamless wireless connectivity experience. It seems to handle low-bandwidth wifi just fine but when it comes to bluetooth it always has a couple of bugs popping up.&lt;/p&gt;&#xA;&lt;p&gt;To answer your question, no need to worry just hang on, the elementary team will fix it in future patches.&lt;/p&gt;&#xA;" OwnerUserId="27716" LastActivityDate="2021-12-31T10:44:43.097" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29423" PostTypeId="2" ParentId="21418" CreationDate="2021-12-31T10:49:02.857" Score="0" Body="&lt;p&gt;I don't seem to understand what you are getting at. Regardless, if you want an application to lower your screen brightness below your pc's absolute minimum, then use &lt;a href=&quot;https://learnubuntumate.weebly.com/brightness-controller.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; screen brightness-controller. Yes, it's open-source.&lt;/p&gt;&#xA;" OwnerUserId="27716" LastActivityDate="2021-12-31T10:49:02.857" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29425" PostTypeId="1" CreationDate="2021-12-31T17:08:21.117" Score="0" ViewCount="139" Body="&lt;h2&gt;sudo apt upgrade results in:&lt;/h2&gt;&#xA;&lt;p&gt;&amp;quot;The following packages have been kept back: grub-common grub-pc grub-pc-bin grub2-common shim shim-signed&amp;quot;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;michael@elementaryOS-phy:/$ sudo apt upgrade&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;The following packages have been kept back:&#xA;  grub-common grub-pc grub-pc-bin grub2-common shim shim-signed&#xA;0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.&#xA;michael@elementaryOS-phy:/$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Listing upgradable packages:&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;michael@elementaryOS-phy:/$ sudo apt list --upgradable&#xA;Listing... Done&#xA;grub-common/bionic 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1 amd64 [upgradable from: 2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1]&#xA;grub-efi-amd64-signed/bionic 1.167~18.04.5+elementary23~ubuntu5.1.7.1+2.04-1ubuntu44.1.2 amd64 [upgradable from: 1.93.24+elementary22~ubuntu5.1.7.1+2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1]&#xA;grub-pc/bionic 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1 amd64 [upgradable from: 2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1]&#xA;grub-pc-bin/bionic 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1 amd64 [upgradable from: 2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1]&#xA;grub2-common/bionic 2.02-2ubuntu8.23+elementary27~ubuntu5.1.7.1 amd64 [upgradable from: 2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1]&#xA;shim/bionic-updates 15.4-0ubuntu9 amd64 [upgradable from: 15+1552672080.a4a1fbe-0ubuntu2]&#xA;shim-signed/bionic-updates 1.37~18.04.11+15.4-0ubuntu9 amd64 [upgradable from: 1.37~18.04.8+15+1552672080.a4a1fbe-0ubuntu2]&#xA;michael@elementaryOS-phy:/$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Tried &amp;quot;apt upgrade -f&amp;quot; per prior advice from Maccer at question &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28829/packages-being-kept-back-when-trying-an-update&quot;&gt;Packages being kept back when trying an update&lt;/a&gt; :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;michael@elementaryOS-phy:/$ sudo apt upgrade -f grub-common grub-pc grub-pc-bin grub2-common shim shim-signed&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Calculating upgrade... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; grub-efi-amd64-bin : Depends: grub-common (= 2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1)&#xA; shim-signed : Depends: grub-efi-amd64-signed (&amp;gt;= 1.167~) but 1.93.24+elementary22~ubuntu5.1.7.1+2.02-2ubuntu8.21+elementary26~ubuntu5.1.7.1 is to be installed or&#xA;                        grub-efi-arm64-signed (&amp;gt;= 1.167~) but it is not installable&#xA;E: Broken packages&#xA;michael@elementaryOS-phy:/$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've also tried to install grub-efi-arm64-signed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install -f grub-efi-arm64-signed&#xA;[sudo] password for michael:            &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;Package grub-efi-arm64-signed is not available, but is referred to by another package.&#xA;This may mean that the package is missing, has been obsoleted, or&#xA;is only available from another source&#xA;&#xA;E: Package 'grub-efi-arm64-signed' has no installation candidate&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure how to verify where that package should be coming from and if it's obsoleted. Below is the output of &amp;quot;apt-get update&amp;quot;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt-get update&#xA;[sudo] password for michael:            &#xA;Hit:1 http://us.archive.ubuntu.com/ubuntu bionic InRelease&#xA;Hit:2 http://security.ubuntu.com/ubuntu bionic-security InRelease     &#xA;Hit:3 http://dl.google.com/linux/chrome/deb stable InRelease          &#xA;Hit:4 http://us.archive.ubuntu.com/ubuntu bionic-updates InRelease    &#xA;Hit:5 http://us.archive.ubuntu.com/ubuntu bionic-backports InRelease  &#xA;Hit:6 http://archive.canonical.com/ubuntu bionic InRelease            &#xA;Get:7 http://packages.elementary.io/appcenter bionic InRelease [5,908 B]&#xA;Hit:8 https://download.mono-project.com/repo/ubuntu stable-bionic InRelease&#xA;Hit:9 http://ppa.launchpad.net/elementary-os/stable/ubuntu bionic InRelease&#xA;Hit:10 https://download.virtualbox.org/virtualbox/debian bionic InRelease&#xA;Hit:11 https://packages.microsoft.com/repos/ms-teams stable InRelease &#xA;Hit:13 http://ppa.launchpad.net/lutris-team/lutris/ubuntu bionic InRelease&#xA;Hit:14 https://linux.teamviewer.com/deb stable InRelease              &#xA;Ign:15 https://cinelerra-gg.org/download/pkgs/ub18 bionic InRelease   &#xA;Hit:16 http://ppa.launchpad.net/obsproject/obs-studio/ubuntu bionic InRelease&#xA;Ign:17 https://cinelerra-gg.org/download/pkgs/ub18 bionic Release     &#xA;Ign:18 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 Packages&#xA;Hit:19 http://ppa.launchpad.net/elementary-os/os-patches/ubuntu bionic InRelease&#xA;Get:20 http://packages.elementary.io/appcenter bionic/main amd64 DEP-11 Metadata [301 kB]&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Hit:12 https://packagecloud.io/slacktechnologies/slack/debian jessie InRelease&#xA;Hit:22 http://ppa.launchpad.net/philip.scott/elementary-tweaks/ubuntu bionic InRelease&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Hit:25 http://ppa.launchpad.net/teejee2008/timeshift/ubuntu bionic InRelease&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Hit:27 http://ppa.launchpad.net/yunnxx/elementary/ubuntu bionic InRelease&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Ign:18 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 Packages&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Ign:18 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 Packages&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Hit:18 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 Packages&#xA;Hit:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Ign:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Hit:21 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main i386 Packages&#xA;Ign:23 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all Packages&#xA;Ign:24 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en_US&#xA;Ign:26 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-es&#xA;Ign:28 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main Translation-en&#xA;Ign:29 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 DEP-11 Metadata&#xA;Ign:30 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all DEP-11 Metadata&#xA;Ign:31 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 48x48 Icons&#xA;Ign:32 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64 Icons&#xA;Ign:33 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 64x64@2 Icons&#xA;Ign:34 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main DEP-11 128x128 Icons&#xA;Ign:35 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main all c-n-f Metadata&#xA;Ign:36 https://cinelerra-gg.org/download/pkgs/ub18 bionic/main amd64 c-n-f Metadata&#xA;Fetched 307 kB in 25s (12.4 kB/s)&#xA;Reading package lists... Done&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure what to do next. In case it matters, my system is multi boot with Windows 10 and I think two intallations of Ubuntu. I can't recall for certain about the Ubuntus, nor the order in which I did things. I think Windows was installed first. Below is my grub menu.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GNU GRUBversion 2.02&#xA;*elementary&#xA;Advanced options for elementary&#xA;Windows Boot Manager (on /dev/sda1)&#xA;Ubuntu 20.04.1 LTS (20.04) (on /dev/sdb5)&#xA;Advanced options for Ubuntu 20.04.1 LTS (20.04) (on /dev/sdb5)&#xA;Ubuntu 20.04.1 LTS(20.04) (on /dev/sdb7)&#xA;Advanced options for Ubuntu 20.04.1 LTS (20.04) (on /dev/sdb7)&#xA;System setup&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Thanks for any help you can provide!&#xA;Best regards, Mike&lt;/p&gt;&#xA;" OwnerUserId="24667" LastEditorUserId="24667" LastEditDate="2022-01-03T02:03:16.787" LastActivityDate="2024-01-28T21:03:35.477" Title="Operating System Updates fail in AppCenter. Runs for 1 second, stops, and the updates are still pending. (grub related packages held back.)" Tags="|updates|appcenter|grub|apt|dependencies|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29426" PostTypeId="2" ParentId="29415" CreationDate="2022-01-01T00:18:26.560" Score="0" Body="&lt;p&gt;Use the following command to see all the PPAs added in your system:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ls /etc/apt/sources.list.d&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Look for PPA here and then remove the .list file associated with PPA using the following command:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo rm -i /etc/apt/sources.list.d/&lt;strong&gt;PPA_Name_list&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;then, add repository&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo pico /etc/apt/sources.list&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;update repository&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27735" LastEditorUserId="27735" LastEditDate="2022-01-01T00:24:25.390" LastActivityDate="2022-01-01T00:24:25.390" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29427" PostTypeId="1" CreationDate="2022-01-01T14:59:56.263" Score="0" ViewCount="106" Body="&lt;p&gt;I am absolutely new to linux and started with elementary on a HP probook just now. I am amazed by the easy installation process and the look and handling of elementary. Congratulations!&#xA;I now wanted to join a second monitor, connection no problem, but the presentation on the second screen was too big. Then I tried different modes in monitor setting and quickly ended up with &amp;quot;eingebaute Anzeige&amp;quot; or &amp;quot;inbuilt monitor&amp;quot;, which I can not reset to the original settings. If I undo the connection, I do have the original presentation on my notebook. If I join the external monitor I end up with a very big presentation, too big for the monitor on both items. But there is no chance to go back to different monitor-setting within the settings on my notebook. The Scaling factor is LoDPI.&#xA;Thanks for an answer and happy new year!&lt;/p&gt;&#xA;" OwnerUserId="27744" LastActivityDate="2024-01-28T22:00:45.090" Title="how to reset monitor settings" Tags="|settings|monitors|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29429" PostTypeId="2" ParentId="29132" CreationDate="2022-01-02T12:47:29.727" Score="0" Body="&lt;p&gt;Elementary has moved to a new app format - Flatpak. This means that apt commands won't work. To view all Flatpak apps, use &lt;code&gt;flatpak list&lt;/code&gt;. To uninstall an app, use &lt;code&gt;flatpak uninstall [app name]&lt;/code&gt;. For example &lt;code&gt;flatpak uninstall org.gnome.Epiphany&lt;/code&gt; should uninstall Epiphany/Web browser and &lt;code&gt;flatpak uninstall io.elementary.camera&lt;/code&gt; should remove the Camera app.&lt;/p&gt;&#xA;" OwnerUserId="27704" LastActivityDate="2022-01-02T12:47:29.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29431" PostTypeId="1" CreationDate="2022-01-02T22:15:54.767" Score="0" ViewCount="553" Body="&lt;p&gt;i can't install Steam in ElementaryOS 6.1, this is error message&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;You are missing the following 32-bit libraries, and Steam may not run: libc.so.6&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27735" LastActivityDate="2022-02-02T08:03:35.317" Title="Steam (Elementary OS 6.1)" Tags="|steam|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29432" PostTypeId="2" ParentId="29431" CreationDate="2022-01-03T07:15:21.707" Score="1" Body="&lt;p&gt;You should enable support for the 32-bit package because Steam client is only available as 32-bit app:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg --add-architecture i386&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then update the APT cache:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Now you should be able to install Steam without any trouble.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2022-01-03T07:15:21.707" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29437" PostTypeId="1" CreationDate="2022-01-05T03:25:39.670" Score="0" ViewCount="29" Body="&lt;p&gt;I new get Elementary in my old Windows notebook. Everthing fine untill I tried to conect online. It dosent show me my wifi reds, only can use the notebook with cablet signal.&#xA;someone can help me please :(&lt;/p&gt;&#xA;" OwnerUserId="27766" LastActivityDate="2024-01-25T21:06:55.790" Title="Cannot conect WIFI" Tags="|wifi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29440" PostTypeId="1" CreationDate="2022-01-05T10:17:12.330" Score="0" ViewCount="884" Body="&lt;p&gt;after some time on pop os I recently install elementary os and i can't connect to my network, i haven't done any update. the option won't even show in the settings. I had the same problem on pop os thats why i change but its still not working i have no idea how to fix it&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;*-network&#xA;description : Network controller&#xA;product: Wi-fi 6 AX200&#xA;vendor: Intel Corporation&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="27768" LastActivityDate="2024-01-25T18:05:25.783" Title="no internet connection on fresh elementary os install" Tags="|wifi|drivers|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29441" PostTypeId="1" CreationDate="2022-01-05T12:38:27.413" Score="0" ViewCount="210" Body="&lt;p&gt;I try elementaryos-6.1 to install Vmware Workstation Pro 16.2. But at first,elementaryos installer say &amp;quot;boot status daemon failed&amp;quot;.So instalation stop 70% configured status.How do I set up elementaryos?&lt;/p&gt;&#xA;&lt;p&gt;Hardware:DELL G5000 C: 1T D: 2T SSD&#xA;Vmware Workstation configure:&#xA;1.Type Linux (Ubuntu 64bit)&#xA;2.Boot from EFI (Bios can not use,Beacuse installer screen are cut)&#xA;3.ISO Image boot and install.elementaryos-6.1-stable.20211218-rc.iso&lt;a href=&quot;https://i.stack.imgur.com/AnNuT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AnNuT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27769" LastActivityDate="2024-01-29T06:01:00.127" Title="elementaryos-6.1-stable.20211218-rc can not install Vmware Workstation Pro 16.2" Tags="|system-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29444" PostTypeId="2" ParentId="29440" CreationDate="2022-01-05T14:19:23.853" Score="0" Body="&lt;p&gt;Read this thread here.  It may be applicable to your situation.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29019/installed-elementary-os-6-odin-on-hp-elitebook-2570p-no-wifi-broadcom-bcm43228/29030#29030&quot;&gt;Installed elementary OS 6 Odin on HP Elitebook 2570p. No WiFi. Broadcom BCM43228&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2022-01-05T14:19:23.853" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29445" PostTypeId="1" CreationDate="2022-01-05T14:20:16.123" Score="2" ViewCount="1250" Body="&lt;p&gt;After doing clean install Eos 6.1 to two laptops I saw that the video app is not opening.&lt;/p&gt;&#xA;&lt;p&gt;Even if I click the icon nothing is happening. I checked to run this from terminal and I got the below error that I have in screenshot.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3mhU9.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3mhU9.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;i also installed the ubuntu-restricted-extras to see if this fix the error but unfortunately I am getting the same error. The video app is not opening.&#xA;I didn't had this problem on 6.0 version. The problem is on the 6.1 version of EOS.&lt;/p&gt;&#xA;&lt;p&gt;Do you have any idea?&lt;/p&gt;&#xA;" OwnerUserId="27771" LastActivityDate="2022-11-12T11:16:34.483" Title="Video app is not working on 6.1" Tags="|videos|video-player|" AnswerCount="6" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29446" PostTypeId="2" ParentId="29257" CreationDate="2022-01-05T14:25:57.297" Score="0" Body="&lt;p&gt;I'd recommend using BlueMail, which can be installed as a snap.  I've yet to be able to ever get an account working on eOS Mail, but BlueMail never fails.  I'm currently accessing multiple accounts through it, including outlook.com.&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2022-01-05T14:25:57.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29447" PostTypeId="2" ParentId="29437" CreationDate="2022-01-05T14:29:16.150" Score="0" Body="&lt;p&gt;I had a similar issue, and solved it at this thread.  I hope it helps.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29019/installed-elementary-os-6-odin-on-hp-elitebook-2570p-no-wifi-broadcom-bcm43228/29030#29030&quot;&gt;Installed elementary OS 6 Odin on HP Elitebook 2570p. No WiFi. Broadcom BCM43228&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="25177" LastActivityDate="2022-01-05T14:29:16.150" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29449" PostTypeId="1" CreationDate="2022-01-06T09:24:02.117" Score="0" ViewCount="161" Body="&lt;p&gt;I got the following error message during update, what went wrong here ?&lt;/p&gt;&#xA;&lt;p&gt;&amp;quot;Error while installing package: installed initramfs-tools package post-installation script subprocess returned error exit status 1&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Is there anybody who could help me or give me a hint how to solve this issue ?&#xA;Thank you&#xA;Michael&lt;/p&gt;&#xA;" OwnerUserId="27777" LastActivityDate="2024-01-27T04:07:51.033" Title="Installed initramfs-tools package error during update" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29450" PostTypeId="2" ParentId="676" CreationDate="2022-01-06T17:15:30.890" Score="0" Body="&lt;pre&gt;&lt;code&gt;rm ~/.local/share/keyrings/*&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then reboot&lt;/p&gt;&#xA;&lt;p&gt;Next time you launch something that needs a password, you'll get prompted for a new password for The Keyring&lt;/p&gt;&#xA;" OwnerUserId="27780" LastEditorUserId="25319" LastEditDate="2022-05-15T15:05:52.920" LastActivityDate="2022-05-15T15:05:52.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29451" PostTypeId="2" ParentId="29425" CreationDate="2022-01-06T21:52:43.143" Score="0" Body="&lt;p&gt;Any thoughts anyone? Would be great even to be pointed to another group/forum to get an answer to this question. I have searched for many hours across the web and cannot get a solid lead on how to proceed. Best I can see is that the shim-signed might be something from Microsoft for secure booting in a dual boot environment, but I cannot find anything specific on how to remedy the situation. This continues to block my OS updates.&lt;/p&gt;&#xA;&lt;p&gt;Best, Mike&lt;/p&gt;&#xA;" OwnerUserId="24667" LastActivityDate="2022-01-06T21:52:43.143" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29452" PostTypeId="2" ParentId="29449" CreationDate="2022-01-06T22:11:18.047" Score="0" Body="&lt;p&gt;I got this too. but it simply updated on the second try however would like to know what it means.&lt;a href=&quot;https://i.stack.imgur.com/zbhHL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/zbhHL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27781" LastActivityDate="2022-01-06T22:11:18.047" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29460" PostTypeId="1" CreationDate="2022-01-08T08:23:23.630" Score="0" ViewCount="101" Body="&lt;p&gt;since WPA-3 is supported, the Connection Manager in Wingpanel looks like below in the attached screenshot:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ymwc0.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ymwc0.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;one is unable to select the shown networks and needs to manually connect, as otherwise it ask to enter the password. Many unspecified Networks are shown as unsecure, although they are secured networks.&lt;/p&gt;&#xA;&lt;p&gt;If one goes to Settings &amp;gt; Network &amp;gt; Wireless, the available Networks are shown correctly.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nZh1L.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nZh1L.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27789" LastActivityDate="2022-01-08T08:23:23.630" Title="Wingpanel Network Manager (WPA-3) Bug elementary OS 6.1 Jólnir" Tags="|wifi|wingpanel|bugs|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29461" PostTypeId="2" ParentId="29415" CreationDate="2022-01-08T08:27:04.333" Score="0" Body="&lt;p&gt;I had the same issue and I solved using the tip from an &lt;a href=&quot;https://askubuntu.com/a/1110307/603553&quot;&gt;Ubuntu topic&lt;/a&gt;. It looks like it is related to some environment variables needed to the update operation with the sudo user.&lt;/p&gt;&#xA;&lt;p&gt;Basically it suggests to use &lt;code&gt;-E&lt;/code&gt; with sudo to pass on those environment variables to the elevated user:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo -E apt-get update&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I did it once on terminal and AppCenter came back to work.&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2022-01-08T08:27:04.333" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29462" PostTypeId="1" CreationDate="2022-01-08T15:50:03.107" Score="0" ViewCount="67" Body="&lt;p&gt;I have integrated graphic and AMD m5 r330.&lt;/p&gt;&#xA;&lt;p&gt;How to switch to AMD m5 r330?&lt;/p&gt;&#xA;&lt;p&gt;In hardware information I can see that it is available:&lt;/p&gt;&#xA;&lt;p&gt;Intel® HD Graphics 520 (Skylake GT2)&lt;/p&gt;&#xA;&lt;p&gt;Advanced Micro Devices, Inc. [AMD®/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]&lt;/p&gt;&#xA;&lt;p&gt;How to select and use Advanced Micro Devices, Inc. [AMD®/ATI] Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / Radeon 520 Mobile]?&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="27792" LastActivityDate="2022-01-08T15:50:03.107" Title="How to switch to GPU AMD m5 r330" Tags="|graphics|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29463" PostTypeId="1" CreationDate="2022-01-08T17:34:47.220" Score="0" ViewCount="21" Body="&lt;p&gt;It's an external 2TB Sandisk device I'm using for backing-up. Not recognized.It works on other Distros. Am I missing something?&lt;/p&gt;&#xA;" OwnerUserId="26962" LastActivityDate="2024-01-29T21:08:15.960" Title="Why can't I see my device when plugged into a type-c or other USB port?" Tags="|usb-drive|ssd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29464" PostTypeId="2" ParentId="28049" CreationDate="2022-01-08T20:19:30.910" Score="0" Body="&lt;p&gt;Just to reply above this topic, i've found some bash script relative to X11 fractional scaling, it works but it requires you execute the script on log-on.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/burntcustard/x11-fractional-display-scaling&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/burntcustard/x11-fractional-display-scaling&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27793" LastActivityDate="2022-01-08T20:19:30.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29466" PostTypeId="2" ParentId="29441" CreationDate="2022-01-08T23:56:14.020" Score="0" Body="&lt;p&gt;I solve it and installed. All Language and Keybord choice default US English.&#xA;Elementaryos-6.1 was finished to configure system setting. Then I choose and setting Japanese locale, my profile. It's OK.&lt;/p&gt;&#xA;" OwnerUserId="27769" LastActivityDate="2022-01-08T23:56:14.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29469" PostTypeId="2" ParentId="29463" CreationDate="2022-01-09T15:59:49.577" Score="0" Body="&lt;p&gt;Well, it seems I asked my question prematurely. As it turned out, I contacted the Intel site regarding my NUC11PHi7C and there is, in fact, a potential driver/update issue embedded in my NUC. The problem of the Thunderbolt ports not being recognized after some use is not unique to mine. Apparently there are other NUCs that are affected. Fortunately I had another identical NUC in which I attempted, successfully, to install EOS. My apology for stirring-up a potential concern. Best, Geo57&lt;/p&gt;&#xA;" OwnerUserId="26962" LastActivityDate="2022-01-09T15:59:49.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29472" PostTypeId="2" ParentId="2538" CreationDate="2022-01-09T21:58:55.663" Score="1" Body="&lt;p&gt;In Debian:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;sudo apt-get install libreoffice-l10n-es&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="27803" LastActivityDate="2022-01-09T21:58:55.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29474" PostTypeId="1" CreationDate="2022-01-10T07:08:22.027" Score="1" ViewCount="51" Body="&lt;p&gt;This is the error shown:&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;The following packages have unmet dependencies:&#xA;linux-modules-nvidia-495-5.11.0-43-generic: Depends: nvidia-kernel-common-495 (&amp;lt;= 495.44-1) but 495.46-0ubuntu0.20.04.1 is to be installed&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KCwgD.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KCwgD.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;N.B: I uninstalled nvidia-driver-495 from appcenter and then tried updating again, but that didn't work.&lt;/p&gt;&#xA;" OwnerUserId="27055" LastActivityDate="2022-01-10T07:08:22.027" Title="Can't Update from Appcenter" Tags="|updates|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29478" PostTypeId="2" ParentId="29045" CreationDate="2022-01-10T14:39:35.153" Score="0" Body="&lt;p&gt;Yes, I'm stumped on this one as well. Is the feature not available in 6.1?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: It's a forthcoming feature request.  &lt;a href=&quot;https://github.com/elementary/mail/issues/616&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/mail/issues/616&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27809" LastActivityDate="2022-01-10T14:39:35.153" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29479" PostTypeId="2" ParentId="29445" CreationDate="2022-01-10T19:14:17.857" Score="0" Body="&lt;p&gt;Install io.elementary.video from flatpak daily&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install io.elementary.video&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then choose daily build&#xA;it worked for me.&lt;/p&gt;&#xA;" OwnerUserId="27810" LastActivityDate="2022-01-10T19:14:17.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29480" PostTypeId="2" ParentId="2844" CreationDate="2022-01-10T19:25:34.353" Score="0" Body="&lt;p&gt;this problem is still not fixed in 6.1&#xA;my system go to suspend even though I turned it to never.&#xA;but I will try &amp;quot;hahacompliance&amp;quot; solution and will see&lt;/p&gt;&#xA;&lt;p&gt;the suspend &amp;amp; suspend time are working&#xA;but when you don't want the suspend from the beginning it not work&#xA;it locked the screen after moment it goes to sleep(suspend)&#xA;and after login in your opened apps all gone&#xA;what should I do?&lt;/p&gt;&#xA;" OwnerUserId="27810" LastEditorUserId="27810" LastEditDate="2022-01-13T09:23:01.423" LastActivityDate="2022-01-13T09:23:01.423" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29481" PostTypeId="1" CreationDate="2022-01-10T22:08:00.753" Score="0" ViewCount="93" Body="&lt;p&gt;I am trying to set default text editor in FileZilla.&lt;/p&gt;&#xA;&lt;p&gt;Installed applications on laptop are Visual Studio Code and Sublime Text.&lt;/p&gt;&#xA;&lt;p&gt;Tried to set /usr/bin/code but it says that &amp;quot;file selected as default editor does not exist&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;What should I do?&lt;/p&gt;&#xA;" OwnerUserId="27792" LastActivityDate="2024-01-31T20:01:40.180" Title="Filezilla default text editor" Tags="|default|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29482" PostTypeId="1" CreationDate="2022-01-11T09:36:41.753" Score="0" ViewCount="323" Body="&lt;p&gt;I'd like to add O365 shortcuts to my dock. I can do this in Chrome but it just opens regular chrome. I'm sure I was previously able to open a contained webapp once upon a time without the location bar and other &amp;quot;general&amp;quot; web browsing stuff.&lt;/p&gt;&#xA;" OwnerUserId="20382" LastActivityDate="2023-10-08T22:54:32.897" Title="How do I create webapps in elementaryOS?" Tags="|epiphany|gnome|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29485" PostTypeId="2" ParentId="29481" CreationDate="2022-01-11T16:52:22.510" Score="0" Body="&lt;p&gt;I solved problem this way.&lt;/p&gt;&#xA;&lt;p&gt;First, unistalled Sublime Text from AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;Installed using terminal, see official site &lt;a href=&quot;https://www.sublimetext.com/docs/linux_repositories.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.sublimetext.com/docs/linux_repositories.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;While installing in terminal I saw line &amp;quot;ebuilding /usr/share/applications/bamf-2.index...&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Now I opened /usr/share/applications/ directory, found sublime_text.desktop, opened this file and found in this file line &amp;quot;Exec=/opt/sublime_text/sublime_text %F&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;Finally, used &amp;quot;/opt/sublime_text/sublime_text&amp;quot; for path for file editing editor in FileZilla and it is working.&lt;/p&gt;&#xA;&lt;p&gt;Hope this will help someone.&lt;/p&gt;&#xA;" OwnerUserId="27792" LastActivityDate="2022-01-11T16:52:22.510" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29487" PostTypeId="2" ParentId="29482" CreationDate="2022-01-11T19:47:39.457" Score="2" Body="&lt;p&gt;It's no longer supported since Elementary switched from a system Epiphany to a flatpak version of Epiphany, which has never supported web apps. Sorry.&lt;/p&gt;&#xA;&lt;p&gt;There is good news: there is some work in progress to add web app support for the flatpaked Epiphany. So it should hopefully be possible again in the future.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2022-01-11T19:47:39.457" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29488" PostTypeId="2" ParentId="28810" CreationDate="2022-01-12T01:52:47.830" Score="0" Body="&lt;p&gt;For posterity, most of Elementary's default applications are flatpaks, since at least Odin.  You can search for them with 'flatpak search PKGNAME'.  I uninstalled the default web browser with 'flatpak remove epiphany'.  And yeah, you can do it with the AppCenter which is pretty amazing :D.  You shouldn't break anything as the required lib files are independent from the rest of the natively installed libs on your system.&lt;/p&gt;&#xA;" OwnerUserId="27818" LastActivityDate="2022-01-12T01:52:47.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29490" PostTypeId="2" ParentId="14274" CreationDate="2022-01-12T09:31:41.887" Score="0" Body="&lt;p&gt;I have two parallel accounts with another email provider. One account syncs both ways flawlessly. The other account only syncs one way (from calendar app to server), but does not download existing events.&#xA;Rebooting does not work.&#xA;The URL I used is the direct link to the calendar.&lt;/p&gt;&#xA;&lt;p&gt;Every time I uncheck/check the calendar in the settings, I get an error message with the following content:&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Connection to ... failed. Backend for source..... and plugin &amp;quot;calendar&amp;quot; cannot be found.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Do you have any ideas?&#xA;TIA&lt;/p&gt;&#xA;" OwnerUserId="27819" LastActivityDate="2022-01-12T09:31:41.887" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29491" PostTypeId="2" ParentId="21586" CreationDate="2022-01-12T10:24:43.750" Score="0" Body="&lt;p&gt;I use &lt;code&gt;youtubedl-gui&lt;/code&gt; just copy the name then paste it in appcenter&lt;/p&gt;&#xA;" OwnerUserId="27810" LastEditorUserId="26" LastEditDate="2022-03-20T21:46:27.693" LastActivityDate="2022-03-20T21:46:27.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29492" PostTypeId="2" ParentId="21586" CreationDate="2022-01-12T13:50:36.663" Score="1" Body="&lt;p&gt;There is an app called &amp;quot;Video Downloader&amp;quot;, it's pretty simple.&#xA;&lt;a href=&quot;https://flathub.org/apps/details/com.github.unrud.VideoDownloader&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flathub.org/apps/details/com.github.unrud.VideoDownloader&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27822" LastActivityDate="2022-01-12T13:50:36.663" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29495" PostTypeId="1" CreationDate="2022-01-13T02:38:33.307" Score="0" ViewCount="25" Body="&lt;p&gt;I've switched from Windows to Elementary OS, and the only part of my day-to-day life that is impacted by the switch is managing my music library. I like to have my library in .aac format, but I'm having trouble finding a way to convert my new music to .aac. I've tried the following applications&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Clementine -- The conversion works, but the files come out as .mp4 &amp;quot;videos&amp;quot; rather than true .aac&lt;/li&gt;&#xA;&lt;li&gt;VLC -- converting to .aac makes .ts files (it's possible I'm using this incorrectly - I don't understand encapsulation)&lt;/li&gt;&#xA;&lt;li&gt;Rhythmbox -- this doesn't seem to do conversions&lt;/li&gt;&#xA;&lt;li&gt;ffmpeg -- I tried a few times, but the output file is unusable&lt;/li&gt;&#xA;&lt;li&gt;gnac -- couldn't get this to install (no Release file)&lt;/li&gt;&#xA;&lt;li&gt;soundconverter -- this was the most promising originally, however the version in the repository didn't include .aac. I installed another version from a tarball which did include .aac, but the conversion hung before it even started.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Does anyone have suggestions?&lt;/p&gt;&#xA;" OwnerUserId="27828" LastActivityDate="2022-02-12T10:03:50.270" Title="Converting .mp3 to .aac" Tags="|vlc|codec|audio-player|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29497" PostTypeId="2" ParentId="2652" CreationDate="2022-01-13T04:57:57.480" Score="0" Body="&lt;p&gt;I have a mid 2009 iMac 27&amp;quot;&lt;br&gt;&#xA;I installed Ubuntu 20.x&lt;br&gt;&#xA;I ran into similar issues but followed these steps and now works fine:&lt;p&gt;&lt;/p&gt;&#xA;&lt;p&gt;After installation, I went into LiveCD mode (try Ubuntu). Its the only way to fix permanently (ie not during startup everytime). But it's a bit tricky when you have to fix this when running from a Live CD. Essentially the idea is to mount the installed Linux from within the LiveCD. I did that, and it helped me a lot. So here are the steps:&lt;p&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Run from the Live CD, and either install Ubuntu or move on if already done&lt;/li&gt;&#xA;&lt;li&gt;Check your installed partition with the command &amp;quot;gparted&amp;quot;. It opens a Window telling you where you installed Ubuntu. In my case it was /dev/sda2 which contained an ext4 partition.&lt;/li&gt;&#xA;&lt;li&gt;Mount the partition: sudo mount /dev/sdXY /mnt&#xA;Then mount/bind the directories Grub needs to access like this:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount --bind /dev /mnt/dev &amp;amp;&amp;amp;&#xA;sudo mount --bind /dev/pts /mnt/dev/pts &amp;amp;&amp;amp;&#xA;sudo mount --bind /proc /mnt/proc &amp;amp;&amp;amp;&#xA;sudo mount --bind /sys /mnt/sys&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Then move on to this environment using chroot&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo chroot /mnt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You should now be able to edit /etc/default/grub now.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo vi /etc/default/grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and change the line&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;nomodeset&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;PS: I found it very useful to also remove quiet and splash so I could see something moving on behind the scenes.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The only thing left for me was update-grub&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo update-grub&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Rebooted and the new settings where in place. With the &amp;quot;nomodeset&amp;quot; option I was able to boot Ubuntu and Lubuntu from a MacBook Pro harddisk.&lt;/p&gt;&#xA;&lt;p&gt;&#xA;Good luck&#xA;" OwnerUserId="27829" LastActivityDate="2022-01-13T04:57:57.480" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29500" PostTypeId="2" ParentId="29495" CreationDate="2022-01-13T09:31:01.110" Score="1" Body="&lt;p&gt;did you try &lt;a href=&quot;https://flathub.org/apps/details/fr.handbrake.ghb&quot; rel=&quot;nofollow noreferrer&quot;&gt;handbrake&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;or&#xA;winff&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install winff&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27810" LastActivityDate="2022-01-13T09:31:01.110" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29503" PostTypeId="1" CreationDate="2022-01-14T10:11:36.523" Score="1" ViewCount="109" Body="&lt;p&gt;The boot partition is just under 500M (457M according to df -h)&lt;/p&gt;&#xA;&lt;p&gt;When installing the third kernel, update-initramfs returns this error:&#xA;Error 24 : Write error : cannot write compressed block&lt;/p&gt;&#xA;&lt;p&gt;And after that it is impossible to install a new kernel.&lt;/p&gt;&#xA;&lt;p&gt;I don't install any kernel myself, I let the app-center take care of it. On the other hand I have to delete the old ones regularly. To do this, I use mainline.&lt;/p&gt;&#xA;&lt;p&gt;Is this usual? Should app-center do the cleaning normally?&#xA;I have always had this problem.&lt;/p&gt;&#xA;&lt;p&gt;Thank you for your help.&lt;/p&gt;&#xA;&lt;p&gt;Translated with &lt;a href=&quot;http://www.DeepL.com/Translator&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.DeepL.com/Translator&lt;/a&gt; (free version)&lt;/p&gt;&#xA;" OwnerUserId="26931" LastActivityDate="2022-01-14T10:11:36.523" Title="Partition /boot full regularly" Tags="|boot|kernel|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29507" PostTypeId="2" ParentId="17192" CreationDate="2022-01-14T15:37:01.857" Score="0" Body="&lt;p&gt;While unofficial, the &lt;a href=&quot;https://flathub.org/apps/details/com.spotify.Client&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatpak&lt;/a&gt; version of Spotify will play nicer with the elementary and work without needing to be launched from the Terminal. AIUI this version is put out by the Spotify devs themselves but not a &amp;quot;blessed&amp;quot; version that Spotify (the company) supports but a wrapper around the Debian package.&lt;/p&gt;&#xA;" OwnerUserId="27555" LastActivityDate="2022-01-14T15:37:01.857" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29508" PostTypeId="2" ParentId="29445" CreationDate="2022-01-14T15:41:32.907" Score="0" Body="&lt;p&gt;I believe its been reported that an update is missing from the stable version that is available already in the daily builds. Try adding this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; flatpak install --system freedesktop org.freedesktop.Platform.GL.default//20.08&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've seen a few people report that fix worked for them in a Brazilian user group&lt;/p&gt;&#xA;" OwnerUserId="27555" LastActivityDate="2022-01-14T15:41:32.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29509" PostTypeId="2" ParentId="29445" CreationDate="2022-01-14T16:05:00.407" Score="0" Body="&lt;p&gt;I am not a technical person,but the other OS worked nice&#xA;Would it be better just to forget os6&#xA;Can't be done with pissing about tbh&lt;/p&gt;&#xA;" OwnerUserId="27839" LastActivityDate="2022-01-14T16:05:00.407" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29514" PostTypeId="1" CreationDate="2022-01-16T18:52:14.163" Score="0" ViewCount="127" Body="&lt;p&gt;I installed the elementary OS Jólnir as ISO in my current partition where the Odin was installed.&#xA;Everything seems to be okay but there is one problem in the app center, when I want to update the operating system updates this error is shown:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;fwupd-signed: Depends: fwupd (= 1.5.11-0ubuntu1~20.04.2) but 1.5.11-0ubuntu2pop1.1~1632510283~20.04~5dec90e~dev is to be installed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I installed &lt;code&gt;sudo apt-get install libfwupdplugin1&lt;/code&gt; but the problem is still there.&#xA;How can I solve this?&lt;/p&gt;&#xA;" OwnerUserId="25112" LastActivityDate="2024-02-13T00:04:10.537" Title="App center problem after upgrading to Jólnir" Tags="|updates|appcenter|update-manager|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29515" PostTypeId="1" CreationDate="2022-01-16T21:54:19.723" Score="0" ViewCount="84" Body="&lt;p&gt;I realize this is a bit beyond the scope of elementary OS, per se, but all y'all seem to be the main users of Vala, and I'm not sure where else to ask this.&lt;/p&gt;&#xA;&lt;p&gt;I am working on a project with a large number of classes (porting from another language, rather than starting from scratch), and the classes are organized into namespaces with corresponding subdirectories. I've declared all of the subdirectories and source files in Meson, but some (but not all!) &lt;code&gt;using&lt;/code&gt; statements for these local namespaces give me errors like &lt;code&gt;The namespace name '&amp;lt;top_level_namespace_ie_project_name&amp;gt;.Sql' could not be found&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Does this mean I am declaring my namespaces incorrectly? I based my structure off of an existing Vala project, and it's worth noting that &lt;em&gt;some&lt;/em&gt; &lt;code&gt;using&lt;/code&gt; declarations of local namespaces are working, but not others. I googled the error, but all of the results are from over a decade ago and/or deal with external libraries, rather than multiple namespaces within a single project.&lt;/p&gt;&#xA;&lt;p&gt;And, if necessary, what sort of additional information would be useful for me to provide in order facilitate answering this question? I'm not quite to the point of listing my project repository publicly, but I can give individual access to anyone wanting to help answer this question, if it would help.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="27186" LastActivityDate="2024-02-06T11:04:55.637" Title="How do I set up a Vala project with multiple namespaces in Meson?" Tags="|development|vala|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29516" PostTypeId="2" ParentId="29515" CreationDate="2022-01-17T04:50:37.590" Score="0" Body="&lt;p&gt;I googled another error message, &lt;code&gt;meson configuration failed with exit code 256&lt;/code&gt;, and I found &lt;a href=&quot;https://www.reddit.com/r/vala/comments/rnni36/problem_with_making_a_project_with_valdo/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this Reddit thread&lt;/a&gt; suggesting I use the command &lt;code&gt;meson builddir&lt;/code&gt; to get a more detailed summary of the Meson build error. It turned out that I had a typo in one of my &lt;code&gt;meson.build&lt;/code&gt; files: in the middle of the file list one of the entries didn't end with &lt;code&gt;',&lt;/code&gt; like it was supposed to, so everything after that point was being ignored.&lt;/p&gt;&#xA;&lt;p&gt;So basically if you think you've done everything correctly with Vala namespaces and Meson, and you're still getting &lt;code&gt;using&lt;/code&gt; errors, &lt;code&gt;meson builddir&lt;/code&gt; should help you find out what's wrong. (It would be nice if &lt;a href=&quot;https://marketplace.visualstudio.com/items?itemName=prince781.vala&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;vala-vscode&lt;/code&gt;&lt;/a&gt; provided this information directly.)&lt;/p&gt;&#xA;" OwnerUserId="27186" LastActivityDate="2022-01-17T04:50:37.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29517" PostTypeId="1" AcceptedAnswerId="29518" CreationDate="2022-01-17T17:37:19.637" Score="0" ViewCount="40" Body="&lt;p&gt;Linux is driving me nuts again...&#xA;I have already one EOS6 with NAS mounting at boot, no problem at all.&lt;/p&gt;&#xA;&lt;p&gt;Now I am doing another EOS6 install (same PC, same NAS, another SSD).&lt;/p&gt;&#xA;&lt;p&gt;Copied everything as per original installation&lt;/p&gt;&#xA;&lt;p&gt;(same /etc/fstab line, same mount point, same username, same password, etc)&lt;/p&gt;&#xA;&lt;p&gt;and still get this crappy message:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gm0I0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gm0I0.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Anybody got any ideas, please (before I shoot myself...)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-01-17T18:35:51.810" Title="connecting to NAS (again...) mount at boot" Tags="|mount|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29518" PostTypeId="2" ParentId="29517" CreationDate="2022-01-17T18:35:51.810" Score="0" Body="&lt;p&gt;Panic over...&lt;/p&gt;&#xA;&lt;p&gt;I forgot that it needs cifs-utils installed before it will work.&lt;/p&gt;&#xA;&lt;p&gt;Why is it not included?&lt;/p&gt;&#xA;&lt;p&gt;Mounting any external stuff is real PITA.&lt;/p&gt;&#xA;&lt;p&gt;Elementary is so good at making things simple for new users, that I wonder why this area is so neglected?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-01-17T18:35:51.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29521" PostTypeId="1" CreationDate="2022-01-18T13:57:54.167" Score="0" ViewCount="614" Body="&lt;p&gt;Is there a way to make tray icons appear on the dock instead of adding PPAs and stuff?&lt;/p&gt;&#xA;&lt;p&gt;thanks&lt;/p&gt;&#xA;" OwnerUserId="27810" LastActivityDate="2024-02-08T05:06:35.793" Title="How to add systemtray icons on dock" Tags="|wingpanel|plank|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29525" PostTypeId="2" ParentId="29521" CreationDate="2022-01-19T00:56:19.553" Score="0" Body="&lt;p&gt;Not exactly system tray icons programs, but can be useful depending on what you want to achieve exactly :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;you can put icons in Plank dock and associate them with a program or a script through defining &lt;code&gt;.desktop&lt;/code&gt; files in &lt;code&gt;~/.local/share/applications&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;some 'docklets' are already available with &lt;code&gt;'Ctrl + right click the Dock' -&amp;gt; Preferences -&amp;gt; Docklets&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Good explanations and examples are provided here : &lt;a href=&quot;https://doc.ubuntu-fr.org/plank&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://doc.ubuntu-fr.org/plank&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2022-01-19T00:56:19.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29526" PostTypeId="1" CreationDate="2022-01-19T03:58:02.073" Score="0" ViewCount="106" Body="&lt;p&gt;Installed Elementary 6.1 on Lenovo Ideapad, worked fine for 2 days.  Booted up from sleep and connects to home network (wired and wireless) fine, but no internet (browser or system updates) can ping 8.8.8.8 from terminal.  Router shows internet connected. Other home devices connect fine.  No apps added or deleted immediately prior to loss of internet connection.&lt;/p&gt;&#xA;&lt;p&gt;What am I missing?&lt;/p&gt;&#xA;" OwnerUserId="27863" LastActivityDate="2022-03-23T07:00:01.173" Title="Network Connection working, no internet" Tags="|internet|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29531" PostTypeId="1" AcceptedAnswerId="29534" CreationDate="2022-01-22T21:47:30.750" Score="0" ViewCount="371" Body="&lt;p&gt;I receive an IMAP Authentication Failure when trying to log in to my Google Account through the 'Online Accounts' settings pane. I have read similar posts on this exchange but switching to 'Allow less secure apps' and '2FA' has not solved the problem. Can anyone shed any light? Thanks.&lt;/p&gt;&#xA;" OwnerUserId="27879" LastActivityDate="2022-06-29T21:09:16.090" Title="Online Accounts (Google)" Tags="|settings|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29532" PostTypeId="1" CreationDate="2022-01-23T02:32:36.390" Score="0" ViewCount="517" Body="&lt;p&gt;I am trying to install protonVPN but I am getting this error. The file is located in my downloads folder and the filename is correct. I am following the instructions on the protonmail website.&#xA;Below are my results.&#xA;What am I missing?&lt;/p&gt;&#xA;&lt;p&gt;Thanks.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ava@Earth:~/Downloads$ ls&#xA;protonvpn-stable-release_1.0.1-1_all.deb&#xA;ava@Earth:~/Downloads$ sudo apt-get install protonvpn-stable-release_1.0.1-1_all.deb&#xA;[sudo] password for ava:             &#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;E: Unable to locate package protonvpn-stable-release_1.0.1-1_all.deb&#xA;E: Couldn't find any package by glob 'protonvpn-stable-release_1.0.1-1_all.deb'&#xA;E: Couldn't find any package by regex 'protonvpn-stable-release_1.0.1-1_all.deb'&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27881" LastActivityDate="2022-11-17T20:43:20.740" Title="Not able to install ProtonVPN" Tags="|install|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29533" PostTypeId="1" CreationDate="2022-01-23T02:57:58.837" Score="0" ViewCount="90" Body="&lt;p&gt;I am on my 3rd install of Odin (Elementary 6.1) each of the previous 2 installs have ended with a DNS issue (can not resolve names on internet but can ping anywhere).  None of the suggestions found here or elsewhere resolved anything.  The first install worked fine for 48 hours, the second for 72.  The only apps installed were ProtonVPN (a vpn obviously), Brave (browser) for both installs, on the second I added wire and telegram as communications apps (it was after wire and telegram that the DNS stopped).&lt;/p&gt;&#xA;&lt;p&gt;This time, I will try a vanilla install, no changes other than adding my wifi password and changing the timezone, to see if it is an issue with my hardware or with the download (although I've run the updates).&lt;/p&gt;&#xA;&lt;p&gt;Any known issues with ProtonVPN, Brave, Wire or Telegram that could cause the DNS issues?&lt;/p&gt;&#xA;" OwnerUserId="27863" LastActivityDate="2022-01-23T02:57:58.837" Title="Elementary 6.1 (Odin) and DNS issues" Tags="|odin|apps|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29534" PostTypeId="2" ParentId="29531" CreationDate="2022-01-23T09:00:44.913" Score="0" Body="&lt;p&gt;For posterity, I have solved my own issue. I set up an application password in my Google Account and this allowed 'Online Accounts' to sign in successfully.&lt;/p&gt;&#xA;" OwnerUserId="27879" LastActivityDate="2022-01-23T09:00:44.913" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29536" PostTypeId="2" ParentId="2650" CreationDate="2022-01-23T18:13:25.407" Score="3" Body="&lt;p&gt;I had the same problem as &lt;em&gt;Xristos&lt;/em&gt;. I fixed creating a new line:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;Alias=My_Device&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;When the device connects, the Name variable is reset but not the Alias variable.&#xA;I hope this helps, I can't reply directly to &lt;em&gt;Xristos&lt;/em&gt; because I don't have any points yet.&lt;/p&gt;&#xA;" OwnerUserId="27884" LastActivityDate="2022-01-23T18:13:25.407" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29537" PostTypeId="2" ParentId="29514" CreationDate="2022-01-23T19:29:44.770" Score="0" Body="&lt;p&gt;I fixed it, it was from the Pop OS stable release's PPA, I do not know when and how it was added but with the command below I solved it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-add-repository -ys ppa:system76-dev/stable --remove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="25112" LastActivityDate="2022-01-23T19:29:44.770" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29539" PostTypeId="1" CreationDate="2022-01-24T18:04:29.660" Score="0" ViewCount="53" Body="&lt;p&gt;when will there be an update to the photo app that will stop it from crashing all the time?&#xA;the application hangs when importing photos from the images directory&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;and could I ask for info how to do it? I am a novice user&lt;/p&gt;&#xA;" OwnerUserId="27889" LastEditorUserId="3018" LastEditDate="2022-02-07T17:17:49.073" LastActivityDate="2022-02-07T17:17:49.073" Title="errors in the photos application in the latest OS distribution" Tags="|applications|photos|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29540" PostTypeId="2" ParentId="29482" CreationDate="2022-01-25T01:12:36.283" Score="0" Body="&lt;p&gt;I just remove flatpack version of epiphany:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak remove epiphany&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and install the repository version with:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;apt install epiphany-browser&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Now I have again web apps. Also my gtk theme is now recognized, that is a big plus :)&lt;/p&gt;&#xA;&lt;p&gt;Thanks to @MichaelC answer, I now understand why some apps don't take my personal gtk theme.&lt;/p&gt;&#xA;" OwnerUserId="27625" LastEditorUserId="27625" LastEditDate="2022-01-25T01:18:27.927" LastActivityDate="2022-01-25T01:18:27.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29541" PostTypeId="2" ParentId="29445" CreationDate="2022-01-25T02:11:38.743" Score="1" Body="&lt;p&gt;the two commands above:&#xA;&lt;code&gt;flatpak install io.elementary.video&lt;/code&gt; and&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak install --system freedesktop org.freedesktop.Platform.GL.default//20.08&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;doesn't work for me...&#xA;So I uninstalled the video from the app center, then we installed celloid with Faltpak (&lt;a href=&quot;https://celluloid-player.github.io/installation.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://celluloid-player.github.io/installation.html&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak remote-add --if-not-exists flathub https://flathub.org/repo/flathub.flatpakrepo&#xA;&#xA;flatpak install flathub io.github.celluloid_player.Celluloid&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and it worked on my computer...&#xA;The result is that Celluloid is installed and the Video app is also installed and working fine..&lt;/p&gt;&#xA;" OwnerUserId="27890" LastActivityDate="2022-01-25T02:11:38.743" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29542" PostTypeId="2" ParentId="28584" CreationDate="2022-01-25T02:15:55.670" Score="0" Body="&lt;p&gt;I've installed Odin on two different computers and had trouble getting past the input/output error 5 every time. Even after an updated iso was put out and reburning the install usb with various etchers. After some searching one person said just keep reinitiating the install after it fails and eventually it will go through. And that actually worked both times.&lt;/p&gt;&#xA;" OwnerUserId="27891" LastActivityDate="2022-01-25T02:15:55.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29544" PostTypeId="2" ParentId="28751" CreationDate="2022-01-25T11:43:11.360" Score="0" Body="&lt;p&gt;Related to Russian language selection.&#xA;Had same issue today with elementaryos-6.1-stable.20211218-rc. After reading this &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28242/odin-installation-stuck-at-70&quot;&gt;Odin installation stuck at 70%&lt;/a&gt; I installed english version first and then switched to Russian UI using the Language settings panel and works like a charm&lt;/p&gt;&#xA;" OwnerUserId="27893" LastActivityDate="2022-01-25T11:43:11.360" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29547" PostTypeId="1" CreationDate="2022-01-25T16:12:33.830" Score="2" ViewCount="82" Body="&lt;p&gt;I found out that some PDF files, while opened in &lt;code&gt;evince&lt;/code&gt;, do not show the contained text.&#xA;One can select the text, copy it and paste it somewhere else, but the text itself isn't rendered inside the opened PDF.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Rvt0G.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Rvt0G.png&quot; alt=&quot;invisible text in PDF&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Some other PDF files, however, can be rendered without problems.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3kW6j.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3kW6j.png&quot; alt=&quot;PDF of a research paper&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I think I saw this mentioned somewhere else, but the memory is too fragile to recall.&#xA;I've searched for this problem on &lt;em&gt;stackexchange&lt;/em&gt;, without finding any references.&lt;/p&gt;&#xA;&lt;p&gt;I've preemptively run &lt;code&gt;sudo fc-cache -f -v&lt;/code&gt; to clear and regenerate the font cache, but the problem persists.&lt;/p&gt;&#xA;&lt;p&gt;Has this happened to you? If so, how did you get around it?&lt;/p&gt;&#xA;" OwnerUserId="7918" LastActivityDate="2022-01-25T16:24:31.643" Title="In Evince, PDF text is not visible on many files" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29548" PostTypeId="2" ParentId="29547" CreationDate="2022-01-25T16:24:31.643" Score="3" Body="&lt;p&gt;Allright, I found the fix:&lt;/p&gt;&#xA;&lt;p&gt;It was about clearing and rebuilding the font cache with &lt;code&gt;fc-cache -f -v&lt;/code&gt;, but run for the &lt;code&gt;flatpak&lt;/code&gt; version of &lt;code&gt;evince&lt;/code&gt;, so the command is:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;flatpak run --command=fc-cache org.gnome.Evince -f -v&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;This may also work for any &lt;code&gt;flatpak&lt;/code&gt; app with font problems, so a generic command would be:&#xA;&lt;code&gt;flatpak run --command=fc-cache domain.owner.appName -f -v&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="7918" LastActivityDate="2022-01-25T16:24:31.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29549" PostTypeId="2" ParentId="28417" CreationDate="2022-01-25T19:08:04.833" Score="0" Body="&lt;p&gt;Enter a key while boot countdown is still running and add vga=ask to the list of kernel parameters and then get the list of possible resolutions displayed and choose one. Did work for me without hassle.&lt;/p&gt;&#xA;&lt;p&gt;By the way: since this is a kernel parameter it works for all distros.&lt;/p&gt;&#xA;" OwnerUserId="27895" LastActivityDate="2022-01-25T19:08:04.833" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29551" PostTypeId="1" CreationDate="2022-01-26T04:31:35.217" Score="0" ViewCount="13" Body="&lt;p&gt;OK. I tried to turn on my firewall but the security &amp;amp; privacy app disapers when lanched. When I click on the app (in Setup), it just disappears. .. Pleas help.&lt;/p&gt;&#xA;" OwnerUserId="27897" LastActivityDate="2024-02-18T00:01:20.163" Title="My Security &amp; privacy disappears when lanched" Tags="|security|privacy|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29552" PostTypeId="1" CreationDate="2022-01-26T20:59:21.647" Score="2" ViewCount="621" Body="&lt;p&gt;I cannot for the life of me successfully sync my Google Calendar with the elementary Calendar app. I use 2FA so understand I will need to use an App Password. But, there are so many URLs in the Google Calendar settings and I am unsure where to put one of these when setting up the account in elementary OS. I am a little overwhelmed. If anyone can shed any light on the matter it would be much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="27879" LastEditorUserId="29" LastEditDate="2022-03-24T18:58:15.873" LastActivityDate="2022-03-24T18:58:15.873" Title="Google Calendar Integration (Jolnir 6.1)" Tags="|calendar|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29553" PostTypeId="1" CreationDate="2022-01-26T23:21:07.380" Score="0" ViewCount="99" Body="&lt;p&gt;What is the MD5 sumcheck for elementryos-6.1-stable20211218-rc.iso ?&lt;/p&gt;&#xA;" OwnerUserId="27897" LastActivityDate="2024-02-18T08:08:31.007" Title="What is the MD5 sumcheck for elementryos-6.1-stable20211218-rc.iso?" Tags="|live-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29554" PostTypeId="2" ParentId="29553" CreationDate="2022-01-27T01:43:06.327" Score="0" Body="&lt;p&gt;Good question. Strangely, there is none available on their website (or this is on-purpose so the iso is not shared and verified).&lt;/p&gt;&#xA;&lt;p&gt;File: elementaryos-6.1-stable.20211218-rc.iso&lt;/p&gt;&#xA;&lt;p&gt;SHA256:&#xA;35c8086bc0af8ccc5ef8629225b215b1742b3a90b475f9f47723b18a315d86a7&lt;/p&gt;&#xA;&lt;p&gt;MD5:&#xA;17b373306a9ee304ee3d544ee9cea97a&lt;/p&gt;&#xA;" OwnerUserId="27868" LastEditorUserId="27868" LastEditDate="2022-01-27T02:04:35.003" LastActivityDate="2022-01-27T02:04:35.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29555" PostTypeId="1" CreationDate="2022-01-27T06:08:53.787" Score="0" ViewCount="208" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/O9eUr.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/O9eUr.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I tried :&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo snap remove firefox&lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;snap &amp;quot;firefox&amp;quot; is not installed&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo apt-get purge firefox&lt;/code&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Package 'firefox' is not installed, so not removed&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;when I click at &amp;quot;Applications/Internet&amp;quot; I still see firefox.&lt;/p&gt;&#xA;" OwnerUserId="20508" LastActivityDate="2024-03-18T13:06:25.797" Title="How to remove firefox" Tags="|applications|software-installation|firefox|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29556" PostTypeId="2" ParentId="28625" CreationDate="2022-01-27T18:59:05.110" Score="0" Body="&lt;p&gt;I understand, and can be wrong, that just the elementary apps can directly get the color toggle between light and dark with elementary original theme. Maybe firefox will do that soon, but is entirely app developers decision.&lt;/p&gt;&#xA;&lt;p&gt;What I have done is change the gtk theme, choosing one dark from gnome-look.org, with the addition of qt5ct I could get certain level of uniformity across most applications, with the exception of flatpack apps installed from appcenter.&lt;/p&gt;&#xA;" OwnerUserId="27625" LastActivityDate="2022-01-27T18:59:05.110" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29557" PostTypeId="2" ParentId="29555" CreationDate="2022-01-27T19:07:38.903" Score="0" Body="&lt;p&gt;I don't have enough points to ask in a commentary, but my guess is this:&lt;/p&gt;&#xA;&lt;p&gt;If firefox can be uninstalled using apt or snap, maybe was not installed with either of those; maybe is a flatpack or an appimage. Or directly compiled from source.&#xA;Can my guess be a possibility?&lt;/p&gt;&#xA;&lt;p&gt;cheers&lt;/p&gt;&#xA;" OwnerUserId="27625" LastActivityDate="2022-01-27T19:07:38.903" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29558" PostTypeId="1" CreationDate="2022-01-27T21:36:06.047" Score="0" ViewCount="414" Body="&lt;p&gt;I have a HP EliteBook Folio 1040 g with a 128GB SSD that used to have Windows. I have successfully replaced it with Zorin OS. Then I thought I'd like to try Elementary OS. However, when I try to install Elementary OS the installer doesn't seem to recognise my hard drive?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;First Scenario&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;If I choose &amp;quot;erase disk and install&amp;quot; it fails. On the details screen I see the following error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;partitioning error: disk commit error: failed to commit libparted changes to &amp;quot;/dev/sda&amp;quot;: No such file or directory (os error 2)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Second Scenario&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;If I start with &amp;quot;custom Install&amp;quot; I see no coloured partitions in the partition selector screen. When I run gparted I start seeing messages like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Input/output error during write on /dev/sda&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;The backup GPT table is corrupt, but the primary appears OK, so that will be used&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm able to create my partitions, but when I click apply I see the above 2 messages multiple times. After the operations are complete and I close gparted and go back to the installer, then I still see no coloured bars in the partition selector.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Interlude with gdisk&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;At this point in time, I ran &lt;code&gt;gdisk&lt;/code&gt; to find out more info:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo gdisk /dev/sda&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Initially it tells me that MBR is &amp;quot;protective&amp;quot; and that GPT is &amp;quot;damaged&amp;quot;. If I choose the &amp;quot;v&amp;quot; option, it tells me that the CRC for the backup partition table is invalid. Using the main partition table to restore the backup doesn't seem to make a difference. The last option I chose was to &amp;quot;convert GPT into MBR and exit&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Scenario Three&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;If I start with Custom Install and an msdos partition table, I am able to run gparted without error and create my partitions. Back on the selection screen I am able to nominate a boot/EFI partition (fat32), a linux-swap partition and an ext4 partition. However, the install fails. If I look at the Details section, it says:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Install error: partition validation: EFI installs cannot be done on disks without a GPT partition layout&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;Extra Info&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;After searching around I found references to a couple of things that might prevent the install:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;I made sure that the drive isn't setup as RAID&lt;/li&gt;&#xA;&lt;li&gt;Secure Boot (in my BIOS) is set to &amp;quot;Legacy Support Enable and Secure Boot Disable&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;I did try to boot in legacy mode, but UEFI is the only option for my USB key&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I'm a little out of my depth here. I don't quite understand why I'm able to install Zorin OS (and I've successfully installed Linux Mint) and I can't install Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="27899" LastEditorUserId="27899" LastEditDate="2022-01-28T00:27:48.023" LastActivityDate="2024-02-21T22:06:45.833" Title="Can't install Elementary OS on a HP EliteBook Folio 1040 g" Tags="|system-installation|64-bit|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29560" PostTypeId="1" CreationDate="2022-01-27T23:24:39.193" Score="0" ViewCount="18" Body="&lt;p&gt;What is the MD5 sumcheck for elementryos-6.0-stable202111005? also elementryos-6.0-stable202111103 ?&lt;/p&gt;&#xA;" OwnerUserId="27897" LastActivityDate="2022-01-28T18:10:48.413" Title="What is the MD5 sumcheck for elementryos-6.0-stable202111005? also elementryos-6.0-stable202111103?" Tags="|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29561" PostTypeId="2" ParentId="29482" CreationDate="2022-01-28T10:23:11.643" Score="0" Body="&lt;p&gt;If the flatpak application does not apply your theme, you can create a &amp;quot;.themes&amp;quot; folder in the &amp;quot;home&amp;quot; folder. Move your theme there)&lt;/p&gt;&#xA;" OwnerUserId="27910" LastActivityDate="2022-01-28T10:23:11.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29562" PostTypeId="1" CreationDate="2022-01-28T10:52:22.200" Score="0" ViewCount="83" Body="&lt;p&gt;How can I remove icons from the applications folder in Elementary OS6? I've tried AppEditor and nothing seems to be working.&lt;/p&gt;&#xA;" OwnerUserId="19858" LastActivityDate="2024-02-18T02:09:36.140" Title="How To Remove Icons No Longer Needed From The Applications Folder" Tags="|applications|icons|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29565" PostTypeId="2" ParentId="29562" CreationDate="2022-01-28T17:52:28.353" Score="0" Body="&lt;p&gt;Application icon is stored in &lt;code&gt;/usr/share/applications/&lt;/code&gt;, you can change or delete the icon you want.&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2022-01-28T17:52:28.353" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29566" PostTypeId="2" ParentId="29553" CreationDate="2022-01-28T17:57:56.210" Score="0" Body="&lt;p&gt;they provide sha256 checksum for latest iso. can be seen here &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2022-01-28T17:57:56.210" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29567" PostTypeId="2" ParentId="29551" CreationDate="2022-01-28T18:09:42.243" Score="0" Body="&lt;p&gt;Have you tried looking for it in the search on the applications menu?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YoWge.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YoWge.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastEditorUserId="3460" LastEditDate="2022-01-28T18:14:42.393" LastActivityDate="2022-01-28T18:14:42.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29568" PostTypeId="2" ParentId="29560" CreationDate="2022-01-28T18:10:48.413" Score="1" Body="&lt;p&gt;they provide sha256 checksum for latest iso. can be seen here &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="3460" LastActivityDate="2022-01-28T18:10:48.413" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29573" PostTypeId="2" ParentId="29558" CreationDate="2022-01-30T00:46:27.787" Score="0" Body="&lt;p&gt;You could try to run gparted from a Live System CD or USB stick and clear  all partitions so that all of your former installations are fully deleted. If an error occurs, your harddisk might be at its end of life. Otherwise install Elementary OS again.&lt;/p&gt;&#xA;&lt;p&gt;[edit] I‘m not sure  if this helps, but gdisk /dev/sdb on my PC returns: MBR protective,BSD not present, APM not present, GPT present, Found valid GPT with protective MBR; using GPT. sdb is my system  drive.&#xA;Gparted has this device info: Model:…SSD, S/N:…,465.76 GB, Path/dev/sdb, Partition table: GPT,…&#xA;The box on the right says:&#xA;Partition  File system  mount point Size  Used  Unused&#xA;not allocated  not allocated - 2.00MB—- —-&#xA;/dev/sdb1  fat32  /boot/efi  263 MiB 11 MiB 251MiB&#xA;/dev/sdb2  lvm2 pv data  465GiB 465GiB. 0.00B&#xA;not allocated  not allocated  -  2.00MB&lt;/p&gt;&#xA;&lt;p&gt;This is how my system  is set up.&#xA;By the way, sda is another ssd which had ElementaryOS5 cloned from another computer on it. It booted immediately in the new PC and was allocated sda. Gparted failed to remove its partitions, so I used Windows and DISKPART.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="27918" LastEditorUserId="27918" LastEditDate="2022-02-01T17:44:13.310" LastActivityDate="2022-02-01T17:44:13.310" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29575" PostTypeId="1" CreationDate="2022-02-01T07:55:49.837" Score="0" ViewCount="30" Body="&lt;p&gt;I connected to a samba folder on a windows with that option.. The problem is the user I loged in doesn't have permission to manage it, so I want to log in again with another user&#xA;(Sorry for my english, is not my mother lenguage, hope the doupt is understandable!)&lt;/p&gt;&#xA;" OwnerUserId="27928" LastEditorUserId="27928" LastEditDate="2022-02-01T08:05:33.747" LastActivityDate="2024-02-23T14:04:55.577" Title="disconnet a smb session opened with &quot;remember forever&quot; option" Tags="|pantheon-files|samba|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29580" PostTypeId="1" CreationDate="2022-02-02T01:53:07.807" Score="0" ViewCount="531" Body="&lt;p&gt;I've been trying to install elementary OS on my computer, I did a boot pen drive it's alright, but when computer starts to install elementary OS, computer show me &amp;quot;elementary OS next elementary tty1&amp;quot; and asked me login and password, ofcourse I didn't install the OS how I have a login and password, I'm confuse about it.&lt;/p&gt;&#xA;" OwnerUserId="27933" LastActivityDate="2024-01-05T16:08:26.033" Title="Elementary OS try or install" Tags="|system-installation|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29581" PostTypeId="1" CreationDate="2022-02-02T06:28:49.227" Score="1" ViewCount="27" Body="&lt;p&gt;I installed Wine using AppCentre. This simple first step spawned a dozen questions, so I hope if I stop and ask one discrete question at a time it will be key to my understanding. I thought I'd try ADE again, from scratch but baby steps.&lt;/p&gt;&#xA;&lt;p&gt;I was warned &amp;quot;uncurated,&amp;quot; then it installed without a snag. After install I was given:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;a generic icon with blank name under Applications/Accessories&lt;/li&gt;&#xA;&lt;li&gt;a proper icon and v7.0.0.0 under AppCentre/Installed list&lt;/li&gt;&#xA;&lt;li&gt;new and expected directories with contents, like ~/.wine&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The first thing I did was open the Terminal to check the version but nothing was available, and if Wine doesn't have a graphic interface it doesn't make sense that an installer wouldn't create a required environment. Is no environment the expected result, and are there Linux assumptions that I'm misunderstanding? I don't want to automatically switch to apt if I don't know the problem I'm solving.&lt;/p&gt;&#xA;" OwnerUserId="19205" LastActivityDate="2022-02-02T06:28:49.227" Title="Why is AppCentre uncurated install not visible in Applications menu or command line?" Tags="|release-hera|wine|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29583" PostTypeId="2" ParentId="28596" CreationDate="2022-02-02T17:03:17.240" Score="1" Body="&lt;p&gt;I got the solution from this thread : &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28511/virtualbox-installation-screen-size-too-small/28552#28552?newreg=88f5825233e840aba4b3e78086f1a137&quot;&gt;Virtualbox installation screen size too small&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Go to Settings &amp;gt; System &amp;gt; Motherboard &amp;gt; Extended features, check &amp;quot;[] Enable EFI (special OSes only)&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;(It may require the extension pack available on &lt;a href=&quot;https://www.virtualbox.org/wiki/Downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;VirtualBox - Downloads page&lt;/a&gt;, I downloaded it but I not sure it's required)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/gsL3r.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/gsL3r.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Have a nice day :-)&lt;/p&gt;&#xA;&lt;p&gt;Greg&lt;/p&gt;&#xA;" OwnerUserId="27935" LastActivityDate="2022-02-02T17:03:17.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29586" PostTypeId="2" ParentId="29575" CreationDate="2022-02-03T11:29:32.180" Score="0" Body="&lt;p&gt;Did you connect using the elementaryos file manager? You should be able to use the file manager (Files) to disconnect.  Just click the &amp;quot;eject&amp;quot; icon against your connection in the sidebar under &amp;quot;Network&amp;quot;.  You should then be able to reconnect using a different name and password using the &amp;quot;Connect Server&amp;quot; dialog.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-02-03T11:29:32.180" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29587" PostTypeId="1" CreationDate="2022-02-03T11:30:50.730" Score="0" ViewCount="115" Body="&lt;p&gt;I have installed 6.1 version.I realised that a lot of apps in repos not showing on appcenter.&lt;/p&gt;&#xA;&lt;p&gt;I have updated via apt but this issue is keeping on.&lt;/p&gt;&#xA;" OwnerUserId="27940" LastActivityDate="2024-03-22T23:04:25.477" Title="Appcenter is not showing all application on repos" Tags="|appcenter|apt|elementary-project|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29591" PostTypeId="1" CreationDate="2022-02-04T15:33:47.717" Score="0" ViewCount="66" Body="&lt;p&gt;I have donated and downloaded your iso file which is a corrupt archive not able to be opened or imaged to USB, DVD, or any other media. You have no support or office phone number and no immediate means of contacting you. I guess I fell for the scam. The reason you require donation to download is evident, it is a scam.&lt;/p&gt;&#xA;&lt;p&gt;I will be digging deep into this and contacting authorities to inform them of the scam.&lt;/p&gt;&#xA;&lt;p&gt;If this is not a scam post a number to contact support or accounting for refunds.&lt;/p&gt;&#xA;" OwnerUserId="27948" LastActivityDate="2022-07-20T22:01:00.113" Title="Where is the OS?" Tags="|system-installation|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29593" PostTypeId="2" ParentId="28297" CreationDate="2022-02-05T12:20:31.723" Score="1" Body="&lt;p&gt;As @RCKT mentioned in his answer there is an upgrade from 5 to 6 can't be done by using some like &lt;code&gt;dist-upgrade&lt;/code&gt;.&#xA;However, it is a good practice to separate &lt;code&gt;/home&lt;/code&gt; and in my opinion &lt;code&gt;/opt&lt;/code&gt; (which I use a lot for custom software) in separated partitions. By the way it's always a good idea to do backups from time to time and maybe hold onto a reinstall script which installs all the software packages back on your device after installations.&#xA;This all isn't either intuitive nor user friendly and requires some technical knowledge to some extend.&#xA;Luckily it came to my attention that the devs are working on a upgrade mechanic. The progress can be followed on &lt;a href=&quot;https://github.com/orgs/elementary/projects/103/views/1&quot; rel=&quot;nofollow noreferrer&quot;&gt;Github&lt;/a&gt;. However, the upgrade mechanism most likely will be released for OS 6 or OS 7.&lt;/p&gt;&#xA;" OwnerUserId="15856" LastActivityDate="2022-02-05T12:20:31.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29595" PostTypeId="2" ParentId="3865" CreationDate="2022-02-06T06:54:01.590" Score="0" Body="&lt;p&gt;This is not supported now, but it could be a goal that a lot of people would appreciate.  I personally would contribute towards a bounty for this.  (I'm already an elementary os supporter)&lt;/p&gt;&#xA;" OwnerUserId="27412" LastActivityDate="2022-02-06T06:54:01.590" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29597" PostTypeId="1" CreationDate="2022-02-06T16:10:09.527" Score="0" ViewCount="127" Body="&lt;p&gt;I returned to elementary 6.1 after a year off with other distros. There's one new feature that's been really off-putting to me: I find the chime that plays when my laptop goes to suspend/sleep mode obnoxiously loud compared to all other sounds on the system, it's even woken me up right after going to sleep once and I'm not a light sleeper. I tried looking around for a way to configure the volume or disable it all together in the settings but I couldn't find anything referencing it.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to completely disable this suspend chime?&lt;/p&gt;&#xA;" OwnerUserId="27960" LastActivityDate="2024-03-01T01:03:25.380" Title="Is there a way to disable the sleep/suspend chime?" Tags="|settings|sound|suspend|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29598" PostTypeId="2" ParentId="29031" CreationDate="2022-02-07T12:31:16.310" Score="0" Body="&lt;p&gt;Iḿ not able to install Virtualbox on Jólnir version, I receive the following message:&lt;/p&gt;&#xA;&lt;p&gt;The following packages have unmet dependencies:&#xA;virtualbox-6.1: Depende: libqt5opengl5 (&amp;gt;= 5.0.2) but it is not installable&#xA;Depende: libqt5printsupport5 (&amp;gt;= 5.0.2) but it is not installable&#xA;Recomienda: libsdl-ttf2.0-0 but it is not installable&#xA;Recomienda: linux-headers-generic but it is not installable or&#xA;linux-headers-generic-pae but it is not installable or&#xA;linux-headers-686-pae but it is not installable or&#xA;linux-headers-amd64 but it is not installable or&#xA;linux-headers-2.6-686 but it is not installable or&#xA;linux-headers-2.6-amd64 but it is not installable or&#xA;linux-headers but it is not installable&#xA;Recomienda: gcc but it is not installable&#xA;Recomienda: make but it is not installable or&#xA;build-essential but it is not installable or&#xA;dpkg-dev but it is not installable&#xA;Recomienda: binutils but it is not installable&#xA;Recomienda: pdf-viewer but it is not installable&lt;/p&gt;&#xA;" OwnerUserId="27964" LastActivityDate="2022-02-07T12:31:16.310" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29599" PostTypeId="1" CreationDate="2022-02-07T21:04:18.840" Score="0" ViewCount="92" Body="&lt;p&gt;So i am super happy with how things work on ElementaryOS 6.1, but unfortunately i have no sound, already tried all google/reddit fixes but nothings helped.&lt;/p&gt;&#xA;&lt;p&gt;In settings/sound both fields output and input (microphone) are empty.&lt;/p&gt;&#xA;&lt;p&gt;Please help:)&#xA;Thanks in advance&lt;/p&gt;&#xA;&lt;p&gt;PS: im using Huawei matebook15&lt;/p&gt;&#xA;" OwnerUserId="27968" LastEditorUserId="27968" LastEditDate="2022-02-09T18:27:36.320" LastActivityDate="2022-02-09T18:27:36.320" Title="Issue with sound system, no sound, empty output/input" Tags="|updates|system|sound|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29600" PostTypeId="1" CreationDate="2022-02-08T01:53:23.893" Score="0" ViewCount="248" Body="&lt;p&gt;I have an old desktop PC with an AMD mobo and CPU and towards the end of last year upgraded my ancient NVIDIA graphics card to a used but newer and more powerful AMD Radeon. Ever since I have had no end of headaches attempting to install a variety of Linux OS. The ones that do install have an option to go with no basic graphics and following installation, I then have to edit the Grub menu in some way. E.g use &amp;quot;nomodeset&amp;quot; or &amp;quot;amdgpu.dc=0&amp;quot; in order to boot and use the system. Unfortunately, this distro does not give me the low graphics option on installation. Noone on any forum in any of the distros can yet explain or adequately help me with this issue. The kernel is meant to contain the drivers for the card to work but nope this simply is not the case for me.&lt;/p&gt;&#xA;&lt;p&gt;My card is a bog-standard AMD Radeon R9 380X from about 2015. Works perfectly fine with Windows 10 but I have yet to find a Linux distro that plays nice with it. Sorry, I can't give all the system specs right now as I am on my laptop and the problem is on a separate machine. But very basically I have an AMD Phenom II X4 and 16 gig RAM with ssd hdd.&lt;/p&gt;&#xA;&lt;p&gt;By the way, I can get it installed by swapping out my AMD card for the old NVIDIA one but overall that doesn't really solve my problem. My only other recourse if all else fails may be to sell this card and buy a replacement NVIDIA one - I thought that was a bit drastic just to install a distro.&lt;/p&gt;&#xA;&lt;p&gt;Any and all suggestions are gratefully received.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="27969" LastActivityDate="2024-03-08T07:07:26.070" Title="How do I install elementary with AMD graphics card when the USB install program does not load the drivers for my card" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29601" PostTypeId="1" CreationDate="2022-02-08T08:12:38.663" Score="0" ViewCount="33" Body="&lt;p&gt;when i upload a video, picture or something like that on web, elementary os freezing. Waiting does not solve the problem. I have to shut down the computer and then restart it. How can i fix this?&lt;/p&gt;&#xA;" OwnerUserId="26309" LastActivityDate="2022-02-10T11:05:09.553" Title="freezes when uploading something" Tags="|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29604" PostTypeId="2" ParentId="29597" CreationDate="2022-02-09T19:53:20.727" Score="0" Body="&lt;p&gt;It is actually an easy to overlook option found in &lt;code&gt;System Settings -&amp;gt; Sounds&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;You just need to untick &lt;code&gt;Event alerts - Play sounds&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2022-02-09T19:53:20.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29605" PostTypeId="1" CreationDate="2022-02-09T20:13:04.600" Score="0" ViewCount="1066" Body="&lt;p&gt;I'm quite new to Linux and decided to install elementary OS on my PC. The problem is that I'm not sure how am I supposed to continue the installation. Currently there's just a black terminal screen saying:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Next elementary tty1&#xA;&#xA;elementary login:&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27982" LastEditorUserId="25612" LastEditDate="2023-04-06T10:12:31.653" LastActivityDate="2024-01-01T15:05:55.753" Title="While installing eOS the system asks to login in tty1" Tags="|system-installation|dual-boot|install|" AnswerCount="4" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29606" PostTypeId="2" ParentId="3042" CreationDate="2022-02-09T21:04:07.687" Score="0" Body="&lt;p&gt;I've managed to get past the lock screen by accessing alternative text-based shell session with &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;F1/6&lt;/kbd&gt; then switching between login managers, namely &lt;code&gt;lightdm&lt;/code&gt; and &lt;code&gt;gdm3&lt;/code&gt; by invoking &lt;code&gt;sudo dpkg-reconfigure&lt;/code&gt; then pass your current &lt;code&gt;display manager&lt;/code&gt;as the final argument. Finally reversed the same step back again.&lt;/p&gt;&#xA;" OwnerUserId="24570" LastEditorUserId="24570" LastEditDate="2022-04-23T18:31:54.907" LastActivityDate="2022-04-23T18:31:54.907" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29607" PostTypeId="2" ParentId="29601" CreationDate="2022-02-10T11:05:09.553" Score="1" Body="&lt;p&gt;Same issue since 1st February. Error report sent twice after restart&lt;/p&gt;&#xA;&lt;p&gt;I'm uploading a screenshot, fingers crossed that the computer doesn't crash ;)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/53yzn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/53yzn.png&quot; alt=&quot;German error message after restart...&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;My first assumptions were Google Chromium via snapcraft.io or my notebook's Nvidia graphics card drivers could be causing the problem.&lt;/p&gt;&#xA;&lt;p&gt;In the meantime I've even bought a desktop PC, but the same problem there with elementary OS 6.1 Jólnir.&lt;/p&gt;&#xA;" OwnerUserId="27985" LastActivityDate="2022-02-10T11:05:09.553" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29610" PostTypeId="1" CreationDate="2022-02-11T06:42:58.063" Score="0" ViewCount="12" Body="&lt;p&gt;I have done a search on this message board with no answer forthcoming. I recently upgraded to OS 6 from 5. I am running elementary on a 2013 MacBookPro as the sole operating system. In OS 5 I used to stream films from my iMac(OSX High Sierra) on the home network. I am unable to do this in the upgrade. My laptop is not visible on the network from my iMac. The &amp;quot;Entire Network&amp;quot; icon when pressed shows &amp;quot;Windows Network&amp;quot; and I am unable to switch it to AFP. I have installed Samba and Network Manager with no resolution to this problem. I have rebooted the laptop and this did not resolve the issue. What am I doing wrong?&lt;/p&gt;&#xA;" OwnerUserId="27989" LastActivityDate="2022-02-11T06:42:58.063" Title="Network sharing problem" Tags="|networking|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29612" PostTypeId="1" CreationDate="2022-02-12T12:21:03.387" Score="0" ViewCount="155" Body="&lt;p&gt;I installed Elementary OS yesterday and am trying to get it to work but have encountered several problems. First off, I'm unable to find all the repositories available usually through ubuntu's standard repository list. For example when trying to search for valve's &amp;quot;Steam&amp;quot; it is missing form the list:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sl/focal 5.02-1 amd64&#xA;Correct you if you type `sl' by mistake&#xA;&#xA;steam-devices/focal 1:1.0.0.61-2ubuntu3 all&#xA;Device support for Steam-related hardware&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It should after all be between those two points there. It is NOT one of my installed repositories either.&lt;/p&gt;&#xA;&lt;p&gt;Is this a common issue? I'm on the latest elementary os version Jolnir.&lt;/p&gt;&#xA;&lt;p&gt;How would I go about getting the correct repositories up?&#xA;installed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/etc/apt/sources.list.d/elementary.list:deb http://ppa.launchpad.net/elementary-os/stable/ubuntu focal main&#xA;/etc/apt/sources.list.d/elementary.list:deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu focal main&#xA;/etc/apt/sources.list.d/elementary.list:&#xA;/etc/apt/sources.list.d/elementary.list.save:deb http://ppa.launchpad.net/elementary-os/stable/ubuntu focal main &#xA;/etc/apt/sources.list.d/elementary.list.save:deb-src http://ppa.launchpad.net/elementary-os/stable/ubuntu focal main &#xA;/etc/apt/sources.list.d/elementary.list.save:&#xA;/etc/apt/sources.list.d/patches.list:deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu focal main&#xA;/etc/apt/sources.list.d/patches.list:deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu focal main&#xA;/etc/apt/sources.list.d/patches.list:&#xA;/etc/apt/sources.list.d/patches.list.save:deb http://ppa.launchpad.net/elementary-os/os-patches/ubuntu focal main &#xA;/etc/apt/sources.list.d/patches.list.save:deb-src http://ppa.launchpad.net/elementary-os/os-patches/ubuntu focal main &#xA;/etc/apt/sources.list.d/patches.list.save:&#xA;/etc/apt/sources.list.d/philip_scott-ubuntu-pantheon-tweaks-focal.list:deb http://ppa.launchpad.net/philip.scott/pantheon-tweaks/ubuntu focal main&#xA;/etc/apt/sources.list.d/philip_scott-ubuntu-pantheon-tweaks-focal.list:# deb-src http://ppa.launchpad.net/philip.scott/pantheon-tweaks/ubuntu focal main&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27995" LastActivityDate="2024-03-05T17:06:05.760" Title="Issues with repositories - some are missing" Tags="|repositories|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29614" PostTypeId="1" CreationDate="2022-02-12T18:37:57.943" Score="0" ViewCount="17" Body="&lt;p&gt;Sent to contact@Elementary.io :&#xA;I bought elementary last August.&#xA;I've been trying to install it since then with no avail.&#xA;Every single download is corrupted. Unable to use.&#xA;No need to tell about messages from google accusing for doing illegal stuff...&#xA;What a drag,&lt;/p&gt;&#xA;&lt;p&gt;Reply : The response was:&lt;/p&gt;&#xA;&lt;p&gt;Your email to group press@elementaryos.org was rejected due to spam classification. The owner of the group can choose to enable message moderation instead of bouncing these emails. More information can be found here: &lt;a href=&quot;https://support.google.com/a/answer/168383&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://support.google.com/a/answer/168383&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="27997" LastActivityDate="2022-02-12T18:37:57.943" Title="Elementary Corrupted iso downloads" Tags="|software-installation|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="29615" PostTypeId="1" CreationDate="2022-02-12T20:08:12.680" Score="0" ViewCount="63" Body="&lt;p&gt;when I tried to mount and other ssd in my elementary os I had get this problem:&#xA;All the files with no permission, seems like they are being mounted as root, but why?&lt;/p&gt;&#xA;&lt;p&gt;I trid to follow this another topic: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28990/nas-share-mount-permission-problems&quot;&gt;NAS share mount permission problems&lt;/a&gt; , but without success.&lt;/p&gt;&#xA;&lt;p&gt;this is my fstab file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  GNU nano 4.8                                                                                                      etc/fstab                                                                                                                &#xA;# /etc/fstab: static file system information.&#xA;#&#xA;# Use 'blkid' to print the universally unique identifier for a&#xA;# device; this may be used with UUID= as a more robust way to name devices&#xA;# that works even if disks are added and removed. See fstab(5).&#xA;#&#xA;# &amp;lt;file system&amp;gt;  &amp;lt;mount point&amp;gt;  &amp;lt;type&amp;gt;  &amp;lt;options&amp;gt;  &amp;lt;dump&amp;gt;  &amp;lt;pass&amp;gt;&#xA;PARTUUID=89a21891-8b81-4bb6-b362-5798978f99f1  /boot/efi  vfat  umask=0077,uid=1000,gid=1000  0       0&#xA;UUID=c3261c9f-cb24-4dc4-a2a2-bd7df74cca76  /  ext4  noatime,errors=remount-ro  0  0&#xA;/dev/disk/by-uuid/290B3424686AD77F /mnt/arquivos/290B3424686AD77F auto nodev,gid=1000,uid=1000,nounix,nofail,x-gvfs-show,\040 0 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yvP5B.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yvP5B.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="18654" LastEditorUserId="18654" LastEditDate="2022-02-12T20:49:11.207" LastActivityDate="2024-03-04T12:01:15.150" Title="Mount permissions problems" Tags="|disk-management|mount|permissions|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29617" PostTypeId="2" ParentId="29615" CreationDate="2022-02-13T07:07:55.517" Score="0" Body="&lt;p&gt;Can't comment (weird Stack rules...) so here is a question:&lt;/p&gt;&#xA;&lt;p&gt;why do you have backward slash in your fstab line?:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;gid=1000,uid=1000,nounix,nofail,x-gvfs-show,\040 0 0&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-02-13T07:07:55.517" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29618" PostTypeId="1" AcceptedAnswerId="29623" CreationDate="2022-02-14T10:48:11.140" Score="0" ViewCount="20" Body="&lt;p&gt;I have installed it, but can't find it?&lt;/p&gt;&#xA;&lt;p&gt;and I need to &amp;quot;point to it&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;searching for GraphUI comes back empty?&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;later edit&lt;/strong&gt;&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;OK, so I worked out that it being flatpak app it is located at:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/home/username/.local/share/flatpak/app/com.github.artemanufrij.graphui &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;but how do I point to it? for another application to use it?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2022-02-14T11:40:22.363" LastActivityDate="2022-02-15T07:49:54.380" Title="GraphUI where is it installed?" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29620" PostTypeId="2" ParentId="29612" CreationDate="2022-02-14T10:50:26.947" Score="0" Body="&lt;p&gt;Try this sudo apt update, if you find the update not fixing the problem then you need to get them else where and install&lt;/p&gt;&#xA;" OwnerUserId="28006" LastActivityDate="2022-02-14T10:50:26.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29621" PostTypeId="1" CreationDate="2022-02-14T18:47:56.697" Score="0" ViewCount="128" Body="&lt;p&gt;I have only recently started using eOS and am loving it.&#xA;But every once in a while, the entire os freezes. I am unable to access tty, the cursor does not move, nothing works and I have to do a hard reboot.&lt;/p&gt;&#xA;&lt;p&gt;I am dual booting Windows 11 and eOS 6.1.&#xA;The freezes are happening when I have a lot of Firefox and chromium tabs open.&lt;/p&gt;&#xA;&lt;p&gt;I also mostly use an external monitor with the Laptop lid down.&lt;/p&gt;&#xA;&lt;p&gt;Since the GPU was pulling a lot of power I switched to Intel integrated Graphics:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;glxinfo|egrep &amp;quot;OpenGL vendor|OpenGL renderer&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This gives the output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OpenGL vendor string: Intel&#xA;OpenGL renderer string: Mesa Intel(R) UHD Graphics 630 (CFL GT2)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Some system information:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;OS: elementary OS 6.1 Jólnir x86_64&#xA;Kernel: 5.13.0-28-generic&#xA;GPU: NVIDIA GeForce GTX 1650 Mobile / Max-Q&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Please let me know what further information would be necessary to diagnose and fix the issue. I really do not want to go back to Kubuntu.&lt;/p&gt;&#xA;&lt;p&gt;This seems to be an old unaddressed issue as well: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/22497/eos-hera-freezes-every-day-several-times-a-day&quot;&gt;eos-hera-freezes-every-day-several-times-a-day&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28008" LastActivityDate="2024-02-18T17:06:00.673" Title="eOS 6.1 Jólnir freezes once every ~2 days" Tags="|crash|release-jolnir|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29623" PostTypeId="2" ParentId="29618" CreationDate="2022-02-15T07:44:41.680" Score="0" Body="&lt;p&gt;Don't know whether it is the fact that it is flatpak?&lt;/p&gt;&#xA;&lt;p&gt;or whether it is because GraphUI is not the same as Graphviz&lt;/p&gt;&#xA;&lt;p&gt;but GraphUI did not work for me (using it with FreeCAD)&lt;/p&gt;&#xA;&lt;p&gt;ended up installing &amp;quot;proper&amp;quot; Graphviz using terminal (and it all works fine...)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install graphviz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;GraphUI is NOT Graphviz so if you need Graphviz (like me) don't bother with GraphUI&lt;/em&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2022-02-15T07:49:54.380" LastActivityDate="2022-02-15T07:49:54.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29628" PostTypeId="1" CreationDate="2022-02-16T17:49:10.937" Score="0" ViewCount="47" Body="&lt;p&gt;I have been using Eos for about 3&#xA;Months now on my Framework laptop with no issues but recently, the computer will freeze after a login after some suspends or restarts.&lt;/p&gt;&#xA;&lt;p&gt;After a suspend or restart I am able to enter my password and the desktop appears but I am only able to move the mouse for 5-10 seconds before everything freezes.&lt;/p&gt;&#xA;&lt;p&gt;The only way I’ve been able to fix it is to do a hard shut down and wait ~30 min before turning it back on.&lt;/p&gt;&#xA;&lt;p&gt;I am able to access BIOS and GRUB, and I was able boot Eos from a micosd without issue, which leads me to think that there is something wrong with Eos rather than the BIOS or hardware or something.&lt;/p&gt;&#xA;&lt;p&gt;Please help! I’ve no idea what to do to fix this.&lt;/p&gt;&#xA;" OwnerUserId="28016" LastActivityDate="2022-02-16T17:49:10.937" Title="6.1 Jólnir Permanent Freeze on startup" Tags="|boot|release-jolnir|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29630" PostTypeId="2" ParentId="29600" CreationDate="2022-02-16T23:06:56.977" Score="0" Body="&lt;p&gt;Okay so I managed to install the distro on an external SSD plugged into my Windows 10 laptop and then popped that drive into my PC. It still refuses to boot normally however and I have to go via the recovery option. Here is my system from within Elementary:&lt;/p&gt;&#xA;&lt;p&gt;System:    Host: SwiftSF31452G73582ad5 Kernel: 5.13.0-28-generic x86_64 bits: 64 Desktop: Pantheon&#xA;Distro: elementary OS 6.1 Jólnir&#xA;Machine:   Type: Desktop Mobo: ASUSTeK model: M4A89GTD-PRO/USB3 v: Rev 1.xx serial: &amp;lt;superuser/root required&amp;gt;&#xA;BIOS: American Megatrends v: 3029 date: 07/05/2012&#xA;CPU:       Quad Core: AMD Phenom II X4 B50 type: MCP speed: 1900 MHz min/max: 800/2400 MHz&#xA;&lt;strong&gt;Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] RS880 [Radeon HD 4290] driver: N/A&#xA;Device-2: Advanced Micro Devices [AMD/ATI] Tonga XT / Amethyst XT [Radeon R9 380X / R9 M295X] driver: N/A&#xA;Display: x11 server: X.Org 1.20.13 driver: ati,vesa unloaded: fbdev,modesetting,radeon&#xA;resolution: 1440x900~N/A&lt;/strong&gt;&#xA;OpenGL: renderer: llvmpipe (LLVM 12.0.0 128 bits) v: 4.5 Mesa 21.2.6&#xA;Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169&#xA;Drives:    Local Storage: total: 959.48 GiB used: 8.85 GiB (0.9%)&#xA;Info:      Processes: 262 Uptime: 3m Memory: 7.45 GiB used: 1.04 GiB (14.0%) Shell: bash inxi: 3.0.38&lt;/p&gt;&#xA;&lt;p&gt;As can be seen no graphics drivers are loaded. Any solutions to this please?&lt;/p&gt;&#xA;" OwnerUserId="27969" LastActivityDate="2022-02-16T23:06:56.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29633" PostTypeId="2" ParentId="29621" CreationDate="2022-02-17T09:03:33.067" Score="0" Body="&lt;p&gt;Same here. Having eOS 6.1, randomly freezes couple times per day. I only have eOS6.1 in my MacBook Air, Dual-Core Intel® Core™ i5-3427U CPU @ 1.80GHz.&lt;/p&gt;&#xA;&lt;p&gt;However, this is quite new feauture (2-3 weeks or so). Never happened with eOS 6.0 but cannot say that this is related to the upgrade.&lt;/p&gt;&#xA;" OwnerUserId="28030" LastActivityDate="2022-02-17T09:03:33.067" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29636" PostTypeId="1" CreationDate="2022-02-17T22:28:59.590" Score="0" ViewCount="69" Body="&lt;p&gt;When I go to install Elementary OS 6.1 Jólnir (i'm sure i didn't offend anyone with that spelling whatsoever) on Virtualbox 6.1.32, it only shows a quarter of the screen, and when i click enter, it does absolutely nothing.&lt;/p&gt;&#xA;&lt;p&gt;Help???&lt;/p&gt;&#xA;" OwnerUserId="28033" LastActivityDate="2024-03-22T21:04:20.500" Title="Can't carry on with the installation of Elementary OS 6.1" Tags="|system-installation|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29640" PostTypeId="1" CreationDate="2022-02-19T18:47:39.280" Score="0" ViewCount="114" Body="&lt;p&gt;I’m a long time Mac OS user and decided to use elementary OS as a learning experience about Linux. So I have literally zero experience with Linux before.&lt;/p&gt;&#xA;&lt;p&gt;So, I installed the newest version of elementary OS on my MacBoon Air 2013. The immediate problem I encounter is that I cannot connect to my internet wifi. In “network settings”, I only have VPN and Proxy but nothing else.&lt;/p&gt;&#xA;&lt;p&gt;I saw all kinds of solutions and understood that I needed some kind of driver. But I have no Ethernet and my phone cannot be used as a hotspot. So I do not have internet access from this computer at all.&lt;/p&gt;&#xA;&lt;p&gt;But I do have another computer that can be used to download things from the internet and I also have a usb drive.&lt;/p&gt;&#xA;&lt;p&gt;Can someone tell me how to proceed from here? I don’t want my Linux experience to be only a few minutes lol :) Thank you!&lt;/p&gt;&#xA;&lt;p&gt;Edit: I saw some solutions here assuming that one has some kind of internet connection. I am wondering if there is a way to do this without any internet connection.&lt;/p&gt;&#xA;" OwnerUserId="28043" LastEditorUserId="28043" LastEditDate="2022-02-19T19:18:12.460" LastActivityDate="2022-02-20T06:53:38.457" Title="Installing internet connection for a newcomer" Tags="|wifi|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29641" PostTypeId="2" ParentId="29640" CreationDate="2022-02-20T05:34:18.840" Score="2" Body="&lt;p&gt;The only answer I can see is to establish a physical connection to a router via an ethernet cable and then do bcmwl-kernel-source update in AppCenter. Do you not know someone with a router and ethernet cable who would let you connect? It only takes a few minutes.&lt;/p&gt;&#xA;" OwnerUserId="27989" LastActivityDate="2022-02-20T05:34:18.840" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29642" PostTypeId="2" ParentId="29640" CreationDate="2022-02-20T06:53:38.457" Score="2" Body="&lt;p&gt;That's quite a common issue with Broadcom adapters if that's what you have, but the solution is very simple. You should connect to the internet using your mobile phone and USB tethering and do &lt;code&gt;sudo apt install bcmwl-kernel-source&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2022-02-20T06:53:38.457" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29644" PostTypeId="1" CreationDate="2022-02-20T15:34:21.280" Score="0" ViewCount="154" Body="&lt;p&gt;I am using&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;CPU: AMD Ryzen 3 3200G (4) @ 3.600GHz&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;GPU: AMD ATI 07:00.0 Picasso&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I am writing this using the live mode.&#xA;Because that is the only thing I am able to do.&lt;/p&gt;&#xA;&lt;p&gt;I am trying to dual boot with windows 10&lt;/p&gt;&#xA;&lt;p&gt;I had recorded the logs for my system using my mobile phone.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/ds2HG1ZY1Lw&quot; rel=&quot;nofollow noreferrer&quot;&gt;Video link (Didn't copy because it was not possible to that) &lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;According to the logs I think the it has something to do with my amdgpu.&lt;/p&gt;&#xA;&lt;p&gt;I would be grateful if you could help me fix this issue.&lt;/p&gt;&#xA;" OwnerUserId="28051" LastActivityDate="2024-02-10T22:03:50.420" Title="Not able to install elementary OS (I think graphics drivers problem)" Tags="|system-installation|amd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29645" PostTypeId="2" ParentId="29644" CreationDate="2022-02-20T17:31:47.567" Score="0" Body="&lt;p&gt;I don't believe that missing firmware messages is something that you'd need to worry about. I'm running Ryzen 7 4800u without any glitches and with all those messages. Luckily all but one of those firmware files can be downloaded from here &lt;a href=&quot;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amdgpu&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and here&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/Umio-Yasuno/unofficial-amdgpu-firmware-repo/tree/main/amdgpu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/Umio-Yasuno/unofficial-amdgpu-firmware-repo/tree/main/amdgpu&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and copy to &lt;code&gt;/lib/firmware/amdgpu&lt;/code&gt;. This will leave only one missing firmware (navi10_something.bin) which I believe belongs to a very old, obsolete, or not yet released product but maybe I'm wrong.&lt;/p&gt;&#xA;&lt;p&gt;Anyhow, at some point in the video, you have this message &lt;code&gt;WARN: Installing for i386-pc platform&lt;/code&gt;. To my knowledge elementaryOS does not support i386 architecture.&lt;/p&gt;&#xA;&lt;p&gt;Hope this helps a bit.&lt;/p&gt;&#xA;" OwnerDisplayName="user26849" LastActivityDate="2022-02-20T17:31:47.567" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29646" PostTypeId="2" ParentId="29591" CreationDate="2022-02-20T18:37:13.927" Score="1" Body="&lt;p&gt;first of all, I'm just a Elementary OS user (quite fresh like yourself, only a few hours).&lt;/p&gt;&#xA;&lt;p&gt;How did you flash the image to a USB drive? Did you use any application such as Rufus or Etcher? If not, you can try Etcher:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://etcher.download/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://etcher.download/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm afraid you're overreacting a little bit btw...&lt;/p&gt;&#xA;" OwnerUserId="28052" LastEditorUserId="28052" LastEditDate="2022-02-20T20:10:29.943" LastActivityDate="2022-02-20T20:10:29.943" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29649" PostTypeId="1" AcceptedAnswerId="29660" CreationDate="2022-02-20T23:19:22.990" Score="1" ViewCount="903" Body="&lt;p&gt;Probably this question is already asked.&lt;/p&gt;&#xA;&lt;p&gt;So, I have MacBook with:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/qGY2o.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qGY2o.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Network controller:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4331 802.11a/b/g/n (rev 02)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have a good router and pretty stable signal:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/87jtX.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/87jtX.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But internet connection is too bad.&lt;br /&gt;&#xA;For example: loss&#xA;&lt;a href=&quot;https://i.stack.imgur.com/poWEA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/poWEA.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And speed:&lt;br /&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/R2ZCm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/R2ZCm.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;At the beginning of elementary using, I installed &lt;code&gt;firmware-b43-installer&lt;/code&gt; instead of &lt;code&gt;bcmwl&lt;/code&gt; &lt;em&gt;(because with bcmwl wifi doesn't work)&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;I read a lot about this trouble, but nothing helps me.&lt;br /&gt;&#xA;Can somebody help?&lt;/p&gt;&#xA;" OwnerUserId="28054" LastActivityDate="2022-03-19T19:41:40.910" Title="MacBookPro WiFi" Tags="|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29652" PostTypeId="1" CreationDate="2022-02-22T08:46:16.053" Score="0" ViewCount="25" Body="&lt;p&gt;Can i update from 6.1 to 7 Without any reinstalling when it will be released?&lt;/p&gt;&#xA;" OwnerUserId="28059" LastActivityDate="2022-02-22T10:28:39.927" Title="Does elementaryOS have updating support? (can i update from one version to another?)" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29653" PostTypeId="2" ParentId="29652" CreationDate="2022-02-22T10:28:39.927" Score="1" Body="&lt;p&gt;No, it doesn't. So if you are going from OS5 to 6 then you will need to save your data as kit will be wiped by the new install.&lt;/p&gt;&#xA;" OwnerUserId="27989" LastActivityDate="2022-02-22T10:28:39.927" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29655" PostTypeId="1" CreationDate="2022-02-22T21:52:10.150" Score="0" ViewCount="166" Body="&lt;p&gt;...what can I use for fan control?&#xA;I need something SUPER EASY!&#xA;Putting EOS on the iMac is really just an experiment and it will only be used for basic stuff like web browsing.&#xA;I just need to set the fans to a certain percentage and be done with it.&#xA;As it stands now, they are full speed &amp;gt;.&amp;lt;&lt;/p&gt;&#xA;" OwnerUserId="20926" LastEditorUserId="20926" LastEditDate="2022-02-22T22:15:12.410" LastActivityDate="2024-03-20T19:04:25.517" Title="Elementary OS on iMac works great but" Tags="|hardware|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29660" PostTypeId="2" ParentId="29649" CreationDate="2022-02-24T04:52:13.520" Score="1" Body="&lt;p&gt;I know exactly this issue with elementary 6.1, and the goal is to get bcmwl-kernel-source to work. You can install the open source b43 driver, but in my experience speeds were also very slow with that driver.&lt;/p&gt;&#xA;&lt;p&gt;The way this is supposed to work, and they way it worked in elementary 6.0, is that you can install bcmwl-kernel-source from the AppCenter, reboot, and then you have wifi at the expected speeds.&lt;/p&gt;&#xA;&lt;p&gt;My understanding is that with the Ubuntu hardware enablement (HWE) release of the 20.04 LTS, which elementary 6.1 is based on, Ubuntu forgot to ship the right kernel headers and then the bcmwl-kernel-source driver did not work. However, that has been fixed, and so if you do all the updates, you should be able to get bcmwl to work.&lt;/p&gt;&#xA;&lt;p&gt;I did some tinkering around and got it to work on 6.1 after some effort. I did some combination of the following commands multiple times in the terminal and eventually bcmwl started to work perfectly:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get remove --purge bcmwl-kernel-source&#xA;sudo apt autoremove&#xA;sudo apt update&#xA;sudo apt install bcmwl-kernel-source&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2022-02-24T04:52:13.520" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29662" PostTypeId="2" ParentId="25907" CreationDate="2022-02-25T13:43:08.990" Score="0" Body="&lt;p&gt;Does it show when you are running the app?&lt;/p&gt;&#xA;&lt;p&gt;Regardless, normal behavior is to put a dot under the applet for pinned apps and add a gear or icon at the side for unpinned apps.  For some reason some pinned apps will launch the gear or icon anyway.  This is the same as in gnome.  I don't know why but I believe it has something to do with the .desktop file.&lt;/p&gt;&#xA;&lt;p&gt;If it is annoying you can stop them my CTRL-right click&amp;gt;preferences&amp;gt;behavior and deselect &amp;quot;Show Unpinned&amp;quot;.  Of course you will also lose the icons for the apps you don't have pinned as well.&lt;/p&gt;&#xA;" OwnerUserId="20905" LastActivityDate="2022-02-25T13:43:08.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29664" PostTypeId="2" ParentId="28286" CreationDate="2022-02-26T08:19:03.573" Score="1" Body="&lt;p&gt;Tried and installed Bottles app (flatpak) and this seem to work straight away, with no problems at all!&lt;/p&gt;&#xA;&lt;p&gt;Another very useful solution - get it from AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-02-26T08:19:03.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29669" PostTypeId="2" ParentId="29655" CreationDate="2022-03-01T09:02:47.230" Score="0" Body="&lt;p&gt;Check this out: &lt;a href=&quot;https://github.com/datcuandrei/MacLinuxUtils&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/datcuandrei/MacLinuxUtils&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Instructions can be found on the readme of the project.&lt;/p&gt;&#xA;&lt;p&gt;If that doesn't work, there's this guide that might help: &lt;a href=&quot;https://datcu-andrei-2.gitbook.io/maclinuxfancontrol/linux-alternatives&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://datcu-andrei-2.gitbook.io/maclinuxfancontrol/linux-alternatives&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2022-03-01T09:02:47.230" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29670" PostTypeId="2" ParentId="27995" CreationDate="2022-03-01T09:07:38.417" Score="0" Body="&lt;p&gt;You can use Pantheon Tweaks to bring the minimise button back.&lt;/p&gt;&#xA;&lt;p&gt;This is the link to the repo: &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Installation instructions can be found on the readme&lt;/p&gt;&#xA;" OwnerUserId="23610" LastActivityDate="2022-03-01T09:07:38.417" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29671" PostTypeId="2" ParentId="29208" CreationDate="2022-03-01T14:55:16.277" Score="0" Body="&lt;p&gt;I've enabled IMAP on Gmail configs and enabled &lt;em&gt;Less secure apps access&lt;/em&gt; as suggested here: &lt;a href=&quot;https://elementaryos.stackexchange.com/a/25736/28087&quot;&gt;https://elementaryos.stackexchange.com/a/25736/28087&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;It's working now&lt;/p&gt;&#xA;&lt;p&gt;Edit:&lt;/p&gt;&#xA;&lt;p&gt;For use Google Workspace Gmail Account, i've had to uncheck the &amp;quot;Use IMAP Credentials option&amp;quot; and put the credentials of email again&lt;/p&gt;&#xA;" OwnerUserId="28087" LastEditorUserId="-1" LastEditDate="2022-03-20T21:41:51.773" LastActivityDate="2022-03-20T21:41:51.773" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29672" PostTypeId="2" ParentId="29365" CreationDate="2022-03-02T14:55:03.633" Score="0" Body="&lt;p&gt;The &lt;code&gt;sudo apt remove elementary-tweaks&lt;/code&gt; seemd to solve the problem for me too!&lt;/p&gt;&#xA;" OwnerUserId="20495" LastActivityDate="2022-03-02T14:55:03.633" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29674" PostTypeId="2" ParentId="26595" CreationDate="2022-03-03T01:42:16.693" Score="0" Body="&lt;p&gt;I had the same issue for a few hours. Never used Elementary OS before. I went to &lt;code&gt;Applications &amp;gt; AppCenter &amp;gt; Installed (tab)&lt;/code&gt; and installed all the updates available. Rebooted and done.&lt;/p&gt;&#xA;" OwnerUserId="28090" LastActivityDate="2022-03-03T01:42:16.693" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29675" PostTypeId="2" ParentId="29636" CreationDate="2022-03-03T09:47:45.337" Score="0" Body="&lt;p&gt;I suspect you are seeing a screen something like this - in my case I had the problem with vmWare ESXi&#xA;&lt;a href=&quot;https://i.stack.imgur.com/xakZV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xakZV.png&quot; alt=&quot;BootScreen Elemtary OS&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;What you need to do is power down the guest, and then power it on again - but watch carefully - you'll get about 4 seconds to hit a key which brings up a Boot menu&#xA;&lt;a href=&quot;https://i.stack.imgur.com/E0Nn5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E0Nn5.png&quot; alt=&quot;BootMenu&quot; /&gt;&lt;/a&gt;&#xA;If you press [Tab] as instructed, you'll get an editable command line  presented.  You need to add the option &lt;code&gt;vga=ask&lt;/code&gt; at the end of the command and press Enter gently - you don't want to skip the next question.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/AXsrT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/AXsrT.png&quot; alt=&quot;vga=ask&quot; /&gt;&lt;/a&gt;&#xA;Then press Enter gently again to reveal a list of screen resolutions&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Riysy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Riysy.png&quot; alt=&quot;Press Enter gently&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/vQv6K.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vQv6K.png&quot; alt=&quot;List of screen resolutions&quot; /&gt;&lt;/a&gt;&#xA;I chose 336 [1280 x 1024] but probably 1024x768 will get you out of trouble.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/IlYjx.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/IlYjx.png&quot; alt=&quot;And there ya go&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27048" LastActivityDate="2022-03-03T09:47:45.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29682" PostTypeId="1" CreationDate="2022-03-06T11:58:56.383" Score="0" ViewCount="31" Body="&lt;p&gt;I'm trying to use new downloaded font with Libre Office (also with Figma and Boxy svg). All system fonts are available except the newest installed.&lt;/p&gt;&#xA;&lt;p&gt;Font is correctly installed in: &lt;code&gt;.local/share/fonts&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I also tried to add it manually in &lt;code&gt;usr/share/fonts/tuetype/new-font&lt;/code&gt; and in &lt;code&gt;usr/local/share/fonts/truetype&lt;/code&gt; and update cache with &lt;code&gt;sudo fc-cache -fv&lt;/code&gt; as seen &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/658/how-do-i-install-and-use-custom-fonts&quot;&gt;here&lt;/a&gt;, but it is still not listed with the other fonts :(&lt;/p&gt;&#xA;&lt;p&gt;Any help would be very welcome. Thank you&lt;/p&gt;&#xA;" OwnerUserId="28114" LastActivityDate="2024-03-26T07:03:50.447" Title="unable to use new added font in 6.1 Jólnir" Tags="|fonts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29683" PostTypeId="2" ParentId="29341" CreationDate="2022-03-06T18:56:06.170" Score="0" Body="&lt;p&gt;Got stuck on this one too, but I just figured it out!&#xA;Just type 0 into the &amp;quot;custom&amp;quot; box and click &amp;quot;Download elementary OS&amp;quot;.&#xA;If all goes well (which it really should), you should see a dialog prompting you to either do a direct download or download via magnet link.&lt;/p&gt;&#xA;" OwnerUserId="28117" LastActivityDate="2022-03-06T18:56:06.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29684" PostTypeId="2" ParentId="29682" CreationDate="2022-03-06T19:04:52.297" Score="0" Body="&lt;p&gt;Ok, works fine, problem was the font's name.&lt;/p&gt;&#xA;&lt;p&gt;Also, via the install button, font is placed in &lt;code&gt;.local/share/fonts&lt;/code&gt;&#xA;and unfortunatly does not work&lt;/p&gt;&#xA;&lt;p&gt;To be listed in Libre Office and other apps available fonts, I had to place it manually in:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;usr/share/fonts/truetype/my-new-font&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28114" LastActivityDate="2022-03-06T19:04:52.297" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29686" PostTypeId="1" CreationDate="2022-03-07T10:56:32.540" Score="1" ViewCount="79" Body="&lt;p&gt;I'm developing a docker client and I've run into the following problem: Everyone knows that docker requires root access to work properly. My application internally calls docker console commands. The question is how to get them correctly when the application is installed via flatpak?&lt;/p&gt;&#xA;&lt;p&gt;I have 2 options without using flatpak:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo my-app&lt;/code&gt; (just run the program from the console)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;pkexec my-app&lt;/code&gt; (more user friendly)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I don't understand how to correctly call docker console commands when the application is installed via flatpak. The commands return a permissions error when using flatpak-spawn.&lt;/p&gt;&#xA;&lt;p&gt;I hope to help, thanks&lt;/p&gt;&#xA;" OwnerUserId="27956" LastActivityDate="2022-03-07T10:56:32.540" Title="Root rights and flatpak" Tags="|flatpak|permissions|sudo|root|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29687" PostTypeId="1" CreationDate="2022-03-07T12:10:17.977" Score="1" ViewCount="12" Body="&lt;p&gt;I updated ElemOS (latest version) on my elderly mother's laptop. I opened the terminal and &amp;quot;sudo apt update&amp;quot; and &amp;quot;sudo apt upgrade&amp;quot; as opposed to doing it via the AppCenter.&lt;/p&gt;&#xA;&lt;p&gt;I left while the updates were busy downloading. My mother said she closed the laptop after it was done. (I can't confirm whether it WAS actually done or not -as mentioned above, I left while it was busy.)&#xA;The next day when the laptop was booted, the following message appeared:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/U8wrF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/U8wrF.jpg&quot; alt=&quot;Minimal BASH-like error&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When I eventually got my hands on the laptop, the following happens after booting up:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/p8YR9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/p8YR9.jpg&quot; alt=&quot;Secure Boot forbids error&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I put the NVME drive into an external enclosure, with the hopes of accessing the data from the home folder in order to copy the most important docs...and then do a fresh install after, but it doesn't allow me access. I can see the drive in Gparted and Gnome Disks but I can't get into it via a file browser to copy the data. I did not encrypt the drive when I did the initial install.&lt;/p&gt;&#xA;&lt;p&gt;When I boot into a live session and look at the drive in Gparted there are 2 partitions:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/2sa9V.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/2sa9V.jpg&quot; alt=&quot;Gparted&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't ever recall seeing the 2nd partition (which is root and data) named &amp;quot;lvm2pv data&amp;quot; before now. Also, at least a quarter of the drive was free before the update started. Now it shows as full..?&lt;/p&gt;&#xA;&lt;p&gt;When I choose &amp;quot;Custom Install (Advanced)&amp;quot; from the USB, I see:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/KIMtm.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KIMtm.jpg&quot; alt=&quot;Custom Install&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;When I first installed ElemOS I just chose the stock standard &amp;quot;Erase Disk and Install&amp;quot; since it was a brand new machine.&lt;/p&gt;&#xA;&lt;p&gt;I tried to mount the external drive via the various &amp;quot;mount&amp;quot; commands, but nothing works.&lt;/p&gt;&#xA;&lt;p&gt;I'm obviously not a power user and (again obviously) don't have the level of knowledge/skill to resolve this. All my searches take me to 6 year old &amp;quot;solutions&amp;quot; -which I tried, but failed.&#xA;I'm really not sure what else to do. Any suggestions would be most welcome.&lt;/p&gt;&#xA;&lt;p&gt;TIA.&lt;/p&gt;&#xA;" OwnerUserId="28119" LastActivityDate="2022-03-07T12:10:17.977" Title="How to resolve the &quot;Minimal BASH-like line editing...&quot; error after updating?" Tags="|updates|error|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29688" PostTypeId="2" ParentId="26673" CreationDate="2022-03-07T17:22:09.220" Score="0" Body="&lt;p&gt;Even if you put focal in there you get this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;roy@MyLaptop:~$ sudo apt install --install-recommends winehq-stable&#xA;Reading package lists... Done&#xA;Building dependency tree... Done&#xA;Reading state information... Done&#xA;Some packages could not be installed. This may mean that you have&#xA;requested an impossible situation or if you are using the unstable&#xA;distribution that some required packages have not yet been created&#xA;or been moved out of Incoming.&#xA;The following information may help to resolve the situation:&#xA;&#xA;The following packages have unmet dependencies:&#xA; winehq-stable : Depends: wine-stable (= 7.0.0.0~focal-1)&#xA;E: Unable to correct problems, you have held broken packages.&#xA;roy@MyLaptop:~$ &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28120" LastEditorUserId="26" LastEditDate="2022-03-18T19:06:55.053" LastActivityDate="2022-03-18T19:06:55.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29689" PostTypeId="1" CreationDate="2022-03-10T08:34:27.027" Score="1" ViewCount="44" Body="&lt;p&gt;I'm moving from 30 years of MacOS to Elementary. I have almost zero knowledge of the command line. Is there a 'baby steps' guide to upgrading from Elementary 5.x to 6.x&lt;/p&gt;&#xA;" OwnerUserId="25015" LastActivityDate="2022-03-12T05:50:04.170" Title="Is there an 'Elementary for Dummies'?" Tags="|release-hera|updates|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29691" PostTypeId="2" ParentId="29689" CreationDate="2022-03-12T05:50:04.170" Score="2" Body="&lt;p&gt;There are already answers to similar questions.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28514/upgrade-latest-hera-to-odin&quot;&gt;Upgrade latest Hera to Odin&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/28515/how-to-update-from-elementary-os-5-1-7-to-elementary-6?noredirect=1&amp;amp;lq=1&quot;&gt;How to update from Elementary OS 5.1.7 to Elementary 6&lt;/a&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://github.com/elementary/triage/discussions/122&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/discussions/122&lt;/a&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;As I understand it, there is no official way to upgrade from 5 to 6.&lt;/p&gt;&#xA;&lt;p&gt;I upgraded as described here: &lt;a href=&quot;https://github.com/elementary/triage/discussions/122#discussioncomment-1192733&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/triage/discussions/122#discussioncomment-1192733&lt;/a&gt;, I think otherwise there will be some pitfalls.&lt;/p&gt;&#xA;" OwnerUserId="27956" LastActivityDate="2022-03-12T05:50:04.170" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29692" PostTypeId="1" CreationDate="2022-03-12T17:24:42.623" Score="0" ViewCount="45" Body="&lt;p&gt;I've installed Linux for the first time, and I've chosen Elementary because it's quite 'mac-like.' I'm a lifelong Mac user. I've spent an age getting Elementary to recognise my bluetooth trackpad and keyboard - success. And I've downloaded an app using Firefox. But where's the download? Where is the Firefox menu which would open the download destination?&#xA;For that matter, where is my home folder? If I create any files, where will they go?&#xA;I'm a long time Apple user, so I expect to see a Finder, documents, icons. There's none of this. Is there a basic intro for a Mac user trying to get to grips with this OS? Or can anyone tell me how I get access to the hard drive and the files and directories / folders on it?&lt;/p&gt;&#xA;" OwnerUserId="28142" LastActivityDate="2024-04-03T15:02:45.320" Title="How do I do anything?" Tags="|user-interface|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29693" PostTypeId="2" ParentId="29552" CreationDate="2022-03-13T11:44:17.207" Score="2" Body="&lt;p&gt;I just did it now. I also have 2FA.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Generate an app password for the calendar in &lt;a href=&quot;https://myaccount.google.com/apppasswords&quot; rel=&quot;nofollow noreferrer&quot;&gt;your google account&lt;/a&gt;.&lt;/li&gt;&#xA;&lt;li&gt;Open Maya (elementary Calendar) and add new google calendar from the cog menu (top right).&lt;/li&gt;&#xA;&lt;li&gt;Fill in your gmail in the &amp;quot;user account&amp;quot; field and confirm.&lt;/li&gt;&#xA;&lt;li&gt;A dialog pops up asking for password. Insert the app password created in step 1.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Done. After this I could see my events showing up in the callendar.&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2022-03-13T11:44:17.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29694" PostTypeId="1" CreationDate="2022-03-14T01:41:43.240" Score="1" ViewCount="13" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/snrxn.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/snrxn.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Some apps such as Brave, Settings and Terminal all have duplicate title bars. Please help me I don't know how to fix it&lt;/p&gt;&#xA;" OwnerUserId="28150" LastActivityDate="2022-03-14T01:41:43.240" Title="Duplicate title bars in some apps?" Tags="|pantheon|gala|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29695" PostTypeId="1" CreationDate="2022-03-14T04:50:09.997" Score="1" ViewCount="227" Body="&lt;p&gt;Videos app has sound but no picture. VLC however works on the same file just fine.&lt;/p&gt;&#xA;&lt;p&gt;I have already done:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y ubuntu-restricted-extras libavcodec-extra libdvd-pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Yes, I know, the answer is use VLC, but it would be nice to get this fixed.  My best guess is Videos on 6.1 is not finding any codecs at all.  These are stock standard .mp4 format files.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas appreciated.&lt;/p&gt;&#xA;" OwnerUserId="24853" LastEditorUserId="26" LastEditDate="2022-03-20T21:52:44.887" LastActivityDate="2022-07-31T12:00:40.057" Title="Videos has no picture, but VLC works" Tags="|videos|codec|release-jolnir|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29696" PostTypeId="2" ParentId="9717" CreationDate="2022-03-14T05:21:47.237" Score="0" Body="&lt;p&gt;Starting in Elementary Odin, notifications are now in &lt;code&gt;io.elementary.notifications&lt;/code&gt;. So, now the path changes to &lt;code&gt;/io/elementary/notifications/do-not-disturb&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The new version for the script would  be:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;&#xA;KEY='/io/elementary/notifications/do-not-disturb'&#xA;dconf write $KEY $(if [ $(dconf read $KEY) = 'true' ]; then echo false; else echo true; fi)&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Source: &lt;a href=&quot;https://www.reddit.com/r/elementaryos/comments/n8dez6/how_to_add_shortcuts_to_notifications_in_odin/&quot; rel=&quot;nofollow noreferrer&quot;&gt;r/elementaryos&lt;/a&gt; on Reddit.&lt;/p&gt;&#xA;" OwnerUserId="28090" LastActivityDate="2022-03-14T05:21:47.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29697" PostTypeId="1" CreationDate="2022-03-15T07:39:46.053" Score="1" ViewCount="54" Body="&lt;p&gt;Have been getting this issue in the last few updates. Could someone please help?&lt;a href=&quot;https://i.stack.imgur.com/cWUoJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/cWUoJ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28153" LastActivityDate="2022-03-15T07:39:46.053" Title="Failed to update &quot;Operating System Updates&quot;" Tags="|updates|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29698" PostTypeId="2" ParentId="29692" CreationDate="2022-03-15T12:20:38.337" Score="0" Body="&lt;p&gt;The linux world is probably more foreign to the Apple demographic even than Windows.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementary.io/docs/learning-the-basics#learning-the-basics&quot; rel=&quot;nofollow noreferrer&quot;&gt;Try this tutorial.&lt;/a&gt; It's a good starter. It sounds like you might answer most of your questions by clicking on Files and looking around.&lt;/p&gt;&#xA;" OwnerUserId="24853" LastActivityDate="2022-03-15T12:20:38.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29700" PostTypeId="1" CreationDate="2022-03-15T22:27:45.780" Score="0" ViewCount="78" Body="&lt;p&gt;[FR]&#xA;Bonjour,&#xA;Je viens de télécharger elementary os et l'utilise depuis la clé USB de 8Go sur mon MacBook air 2013. C'est mon premier contact avec Linux.&#xA;Je n'ai pas de wifi sur la version de démonstration et me suis donc connecté par câble à mon téléphone pour partager la connexion.&#xA;J'ai ensuite essayé tous les tutos trouvables je crois, y compris les trois méthodes &lt;a href=&quot;https://subinsb.com/install-realtek-d723-wifi-driver-linux/#download&quot; rel=&quot;nofollow noreferrer&quot;&gt;ici&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install linux-headers-`uname -r`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Cette commande me retourne : E : dpkg a été interrompu. Il est nécessaire d'utiliser &amp;quot; sudo dpkg --configure -a&amp;quot; pour corriger le problème.&#xA;Ladite commande me donne :&#xA;dpkg : erreur : échec de l'écriture de status enregistrement de &amp;quot;apache2-bin&amp;quot; à &amp;quot;/var/lib/dpkg/status&amp;quot; : aucun espace disponible sur le  périphérique.&#xA;Je suis très très déçu.&lt;/p&gt;&#xA;&lt;p&gt;Une idée ?&#xA;Merci d'avance&lt;/p&gt;&#xA;&lt;p&gt;[EN]&#xA;Hello,&#xA;I just downloaded elementary os and use it from the 8GB USB key on my MacBook air 2013. This is my first contact with Linux.&#xA;I don't have wifi on the demo version so I connected via cable to my phone to share the connection.&#xA;I then tried every tutorial I could find I think, including the three methods &lt;a href=&quot;https://subinsb.com/install-realtek-d723-wifi-driver-linux/#download&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    sudo apt-get install linux-headers-`uname -r`&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This command returns: E: dpkg has been interrupted. It is necessary to use &amp;quot;sudo dpkg --configure -a&amp;quot; to correct the problem.&#xA;The said command gives me:&#xA;dpkg: error: failed to write status record from &amp;quot;apache2-bin&amp;quot; to &amp;quot;/var/lib/dpkg/status&amp;quot;: no space available on the device.&#xA;I am very very disappointed.&lt;/p&gt;&#xA;&lt;p&gt;Any idea?&#xA;Thanks in advance&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[1]: https://subinsb.com/install-realtek-d723-wifi-driver-linux/#download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Translated with &lt;a href=&quot;http://www.DeepL.com/Translator&quot; rel=&quot;nofollow noreferrer&quot;&gt;www.DeepL.com/Translator&lt;/a&gt; (free version)&lt;/p&gt;&#xA;" OwnerUserId="28156" LastEditorUserId="28156" LastEditDate="2022-03-16T06:15:31.220" LastActivityDate="2024-04-04T14:06:00.853" Title="Wifi not working on démo MacBook air 2013" Tags="|wifi|macbook|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29701" PostTypeId="1" AcceptedAnswerId="29702" CreationDate="2022-03-16T00:04:11.807" Score="1" ViewCount="67" Body="&lt;p&gt;I have a Macbook where I have a dual boot setup with elementary OS 5 Hera and macOS. The original installation was from scratch with a new SSD where I partitioned and installed both successfully. I now want to upgrade from Hera/5 to Odin/6 on the Linux partitions.&lt;/p&gt;&#xA;&lt;p&gt;I created a bootable USB using balena Etcher and successfully booted to demo mode. If I boot to install mode and choose Custom Install, I can select the Linux partitions to use but the EFI partition displays as &amp;quot;too small&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Since major upgrades, like 5 to 6, require backing up data and doing a full install, how does this happen on existing dual boot setups? (I see another user has a similar question from a month ago that remains unanswered.) I swear I did not have this problem when working with Ubuntu years back. But, I might have been using a virtual machine so I could do an all-or-nothing install.&lt;/p&gt;&#xA;&lt;p&gt;Do I have to do partition/erase work on the Mac side in Disk Utility first or use the Recovery HD for some work? How can I get this done?&lt;/p&gt;&#xA;" OwnerUserId="26772" LastActivityDate="2022-03-16T07:45:57.700" Title="Macbook dual boot how to upgrade install 5 to 6" Tags="|release-hera|updates|dual-boot|macbook|odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29702" PostTypeId="2" ParentId="29701" CreationDate="2022-03-16T07:45:57.700" Score="0" Body="&lt;p&gt;Did you set up a dedicated partition for /home ? In which case you can keep it and just resize/recreate other linux partitions from live usb install instead of just reusing the previous ones.&lt;/p&gt;&#xA;&lt;p&gt;The install custom partitioning tool would be the same as using Mac tools, so those are not necessary, unless you feel more confident using them to prepare the partitions.&lt;/p&gt;&#xA;&lt;p&gt;As for the Efi part, I think I eventually used Grub Customizer to have the correct booting on my Imac.&lt;/p&gt;&#xA;&lt;p&gt;Of course you want to make sure you don't erase the Mac part, and that you have all your data backed up before starting the project :P&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2022-03-16T07:45:57.700" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29703" PostTypeId="2" ParentId="29700" CreationDate="2022-03-16T08:24:59.717" Score="0" Body="&lt;p&gt;[FR] Bienvenue sur linux !&#xA;Sans aller aussi loin que les solutions proposées dans le lien, après installation de eOS Odin sur un Imac et branchement par ethernet, il m'a suffit d'aller dans le Centre d'applications pour mettre à jour le système et installer les pilotes recommandés.&lt;/p&gt;&#xA;&lt;p&gt;Je suppose que les pilotes pour périphériques wifi des Macs ne sont pas disponibles dans le live install... En utilisation live depuis la clef usb, je pense que l'on peut faire la même manip, et qu'elle reste persistente après un reboot dessus.&lt;/p&gt;&#xA;&lt;p&gt;Si tu choisis de l'installer ou de faire un dual boot, il y a plein de sites qui suggèrent quoi installer pour améliorer certains aspects comme l'accès a plus de logiciels etc, mais ça peut dépendre de l'usage fait de l'ordinateur, Elementary Os se voulant facile d'utilisation, il propose un environnement épuré et simplifié protégeant l'experience utilisateur des débutants :)&lt;/p&gt;&#xA;&lt;p&gt;[EN]&#xA;Welcome to linux !&#xA;Without going as far as the solutions offered in the link, after installing eOS Odin on an Imac and connecting by ethernet, I only had to go to the App Center to update the system and install the recommended drivers, including wireless one.&lt;/p&gt;&#xA;&lt;p&gt;I assume that the drivers for wifi devices of Macs are not available in the live install... Using eOS live from the usb stick, I think you can do the same procedure, it should be persistent.&lt;/p&gt;&#xA;&lt;p&gt;If you choose to install it or do a dual boot, there are plenty of sites that suggest what to install to improve some aspects like access to more softwares etc, but it may depend on the use made of the computer, Elementary Os is intended to be easy to use, it offers a clean and simplified environment safeguarding more advanced use for newbies :)&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2022-03-16T08:24:59.717" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29705" PostTypeId="2" ParentId="24400" CreationDate="2022-03-17T11:30:50.933" Score="0" Body="&lt;p&gt;I know it's an old question but it still happens on elementary OS 6.1 Jólnir. The answer by Leo S. &lt;a href=&quot;https://elementaryos.stackexchange.com/a/25916/22638&quot;&gt;here&lt;/a&gt; works but if you prefer more GUI approach, you can install &lt;a href=&quot;https://launchpad.net/menulibre&quot; rel=&quot;nofollow noreferrer&quot;&gt;MenuLibre&lt;/a&gt;. I got the same problem with Blender flatpak, and with this program it's super easy.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Search for the program,&lt;/li&gt;&#xA;&lt;li&gt;open the Advanced Tab,&lt;/li&gt;&#xA;&lt;li&gt;Look for the Startup WM Class,&lt;/li&gt;&#xA;&lt;li&gt;There's a little search icon you can click to identify the window,&lt;/li&gt;&#xA;&lt;li&gt;and save it.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ruPJb.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ruPJb.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22638" LastActivityDate="2022-03-17T11:30:50.933" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29709" PostTypeId="1" CreationDate="2022-03-18T15:26:04.433" Score="0" ViewCount="66" Body="&lt;p&gt;I can't connect to the wi-fi network, it doesn't recognize my wi-fi card.&#xA;The problem is that my laptop does not have an ethernet cable, it does not have the rj45 port&lt;/p&gt;&#xA;" OwnerUserId="28165" LastActivityDate="2022-12-18T01:00:25.103" Title="I can't connect to wifi, it doesn't recognize the network card" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29711" PostTypeId="2" ParentId="29140" CreationDate="2022-03-18T20:50:33.037" Score="0" Body="&lt;p&gt;Had the same issue, and had to plug in a usb keyboard to install, then once installed  bluetooth kb and mouse were recognized normally...&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2022-03-18T20:50:33.037" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29712" PostTypeId="1" CreationDate="2022-03-19T16:12:33.940" Score="0" ViewCount="154" Body="&lt;p&gt;I'm running eOS Juno 6.1 on my laptop, and recently received a notification that my boot drive was full. My current kernel version is &lt;strong&gt;linux-image-5.13.0-35-generic&lt;/strong&gt;. When purging out the old unused kernel versions to free up space, the &lt;strong&gt;linux-image-unsigned-5.11.0-43-generic&lt;/strong&gt; &amp;amp; &lt;strong&gt;linux-image-unsigned-5.11.0-46-generic kernel&lt;/strong&gt; versions fail to remove due to what appears to be &amp;quot;&lt;em&gt;Directory not empty&lt;/em&gt;&amp;quot; errors.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J5h8b.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J5h8b.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here is the output for the failure to remove one of these old kernels:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/qDIVM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/qDIVM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also, I've previously purged the &lt;strong&gt;linux-image-5.13.0-27-generic&lt;/strong&gt; kernel, but it continues to remain in the boot directory once I update grub. I'm also not certain as to why I have unsigned kernel versions within my boot directory. I've haven't installed any kernel versions manually. I do use the apt update and apt upgrade commands regularly.&lt;/p&gt;&#xA;" OwnerUserId="15410" LastActivityDate="2022-03-20T19:26:38.847" Title="Juno 6.1: Old kernel versions fail to remove, &quot;Directory not empty&quot;" Tags="|updates|boot|grub|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29715" PostTypeId="2" ParentId="28973" CreationDate="2022-03-20T12:23:22.073" Score="1" Body="&lt;p&gt;I had the same issue and the update to 6.1 didn't solved the issue.&#xA;I could solve it following some help from other topics:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Disabling USB devices (including bluetooth) that keeps turning on the device: &lt;a href=&quot;https://askubuntu.com/a/1144466/603553&quot;&gt;https://askubuntu.com/a/1144466/603553&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Suspend On when AC power is connected:&#xA;Following these instructions I've discovered that my device (X1 7th Gen) had a BIOS settings that I can disable/enable suspension when AC power is connected. Also, there is an option to optimize suspension for Linux/Windows OS.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://superuser.com/questions/1706844/configure-ubuntu-to-unsuspend-when-connected-to-power&quot;&gt;https://superuser.com/questions/1706844/configure-ubuntu-to-unsuspend-when-connected-to-power&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6806" LastActivityDate="2022-03-20T12:23:22.073" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29716" PostTypeId="1" CreationDate="2022-03-20T12:47:09.077" Score="0" ViewCount="96" Body="&lt;p&gt;When I start Appcenter, I see that I can't install new apps in 6.1 version.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/mnQ3C.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mnQ3C.png&quot; alt=&quot;For example, in &amp;quot;Graphics&amp;quot; section I just se &amp;quot;Photos&amp;quot; app&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28064" LastEditorUserId="26" LastEditDate="2022-03-20T21:53:32.167" LastActivityDate="2024-03-22T16:02:25.333" Title="Appcenter does not show any apps?" Tags="|appcenter|error|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29717" PostTypeId="1" CreationDate="2022-03-20T14:23:15.820" Score="0" ViewCount="176" Body="&lt;p&gt;At manager wifi, when key disabled, not is possible enabled  again and scan for networks wifi.&#xA;The problem only solves using: &amp;quot;sudo nmcli radio wifi on&amp;quot; in shell terminal.&#xA;Is there any solution to the issue?&lt;/p&gt;&#xA;" OwnerUserId="28175" LastActivityDate="2022-04-21T21:03:35.407" Title="Wifi problem with Elementary OS 6.1" Tags="|wifi|networking|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29718" PostTypeId="1" CreationDate="2022-03-20T16:01:46.977" Score="1" ViewCount="82" Body="&lt;p&gt;On a laptop where I already have elementary OS 5 installed in BIOS mode (no /boot/efi partition), I am trying to install elementary OS 6 from USB, and I would like to keep the system booting in BIOS, not UEFI, mode. However, the installer always insists on a separate /boot/efi partition in the partitioning step. (This is not the case on another laptop where I tried installing, where just a / partition was sufficient.) I checked the BIOS boot settings, and it's set to Legacy Support (Legacy First). I tried searching for an installer boot option to force BIOS mode but did not come to something. Any pointers are appreciated.&lt;/p&gt;&#xA;" OwnerUserId="28176" LastEditorUserId="28176" LastEditDate="2022-03-21T07:37:30.507" LastActivityDate="2024-01-08T18:03:30.430" Title="Is it possible to force BIOS mode (as opposed to UEFI) in the installer?" Tags="|boot|uefi|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29719" PostTypeId="2" ParentId="29712" CreationDate="2022-03-20T19:26:38.847" Score="1" Body="&lt;p&gt;After continued reading and attempts to clear the old kernel versions from my boot drive, I've successfully identified a way to do this. Using Synaptic Package Manager, I marked all of the old 5.11 kernels for &amp;quot;Complete Removal&amp;quot; and applied the change. The first attempt did not clear the kernel, but created additional unsigned kernels. I then marked all of the 5.11 unwanted kernels (both signed and unsigned) again for &amp;quot;Complete Removal&amp;quot; and applied the change. This time the kernels were completely removed from my system.&lt;/p&gt;&#xA;" OwnerUserId="15410" LastActivityDate="2022-03-20T19:26:38.847" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29721" PostTypeId="2" ParentId="29264" CreationDate="2022-03-20T21:44:36.947" Score="0" Body="&lt;ol&gt;&#xA;&lt;li&gt;No.&lt;/li&gt;&#xA;&lt;li&gt;No.&lt;/li&gt;&#xA;&lt;li&gt;No.&lt;/li&gt;&#xA;&lt;li&gt;No (can be accomplished with add-ons)&lt;/li&gt;&#xA;&lt;li&gt;Varies drastically on the printer.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="26" LastActivityDate="2022-03-20T21:44:36.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29723" PostTypeId="1" CreationDate="2022-03-22T17:39:29.270" Score="0" ViewCount="346" Body="&lt;p&gt;I am being outputted the following code every time I try to sudo apt-get update:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Err:1 http://mirrors.ubuntu.com/mirrors.txt Mirrorlist&#xA;      Could not connect to mirrors.ubuntu.com:80 (91.189.89.32), connection timed out&#xA;    Ign:2 mirror://mirrors.ubuntu.com/mirrors.txt focal InRelease&#xA;    Ign:3 mirror://mirrors.ubuntu.com/mirrors.txt focal-updates InRelease&#xA;    Err:4 mirror://mirrors.ubuntu.com/mirrors.txt focal Release&#xA;      Downloading mirror file failed&#xA;    Err:5 mirror://mirrors.ubuntu.com/mirrors.txt focal-updates Release&#xA;      Downloading mirror file failed&#xA;    Reading package lists... Done&#xA;    E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt focal Release' no longer has a Release file.&#xA;    N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;    N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;    E: The repository 'mirror://mirrors.ubuntu.com/mirrors.txt focal-updates Release' no longer has a Release file.&#xA;    N: Updating from such a repository can't be done securely, and is therefore disabled by default.&#xA;    N: See apt-secure(8) manpage for repository creation and user configuration details.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I tried configuring the files in the /etc/apt/sources.list by changing it to archives.ubuntu, but it still didn't work. Can anyone help out. This is my sys release:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;No LSB modules are available.&#xA;Distributor ID: Elementary&#xA;Description:    elementary OS 6.1 Jólnir&#xA;Release:    6.1&#xA;Codename:   jolnir&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28188" LastActivityDate="2024-03-09T17:04:10.497" Title="Repository release doesn't exist anymore" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29724" PostTypeId="2" ParentId="29717" CreationDate="2022-03-22T19:37:42.023" Score="1" Body="&lt;p&gt;Try restarting the the NetworkManager&lt;/p&gt;&#xA;" OwnerUserId="28190" LastActivityDate="2022-03-22T19:37:42.023" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29725" PostTypeId="2" ParentId="29709" CreationDate="2022-03-22T19:44:25.620" Score="1" Body="&lt;p&gt;This could be the absence of a network manager install it and tell me how it goes. If it is installed restart it. If that doesn't work either, try the command &lt;code&gt;rfkill list sudo rfkill unblock all&lt;/code&gt;.&#xA;The rfkill would tell us if the radio kill switches are blocking the connection.&lt;/p&gt;&#xA;" OwnerUserId="28190" LastActivityDate="2022-03-22T19:44:25.620" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29727" PostTypeId="1" CreationDate="2022-03-25T00:57:04.010" Score="0" ViewCount="32" Body="&lt;p&gt;Why is it that all the versions of Linux that costs money comes with no install instructions? Some of us have very diminshed mental capacity due to illness so I need things explained very fully and very simply. Now I want to demand my money back as there is no support that comes from any Linux that you pay for. Gives me a bad taste and makes me wonder just how honest all the Linux OS's are just in to take your money, These Linux's might catch a bad review from me should I not get any support after all since I paid I better get all the support I need. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="19028" LastActivityDate="2023-12-16T16:01:20.157" Title="How do I install Elementary?" Tags="|system|install|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29729" PostTypeId="2" ParentId="29727" CreationDate="2022-03-26T11:46:39.777" Score="0" Body="&lt;p&gt;I'm just gonna copy the comment from the other guy so you can mark this as resolved.&lt;/p&gt;&#xA;&lt;p&gt;Hi there! There is a very detailed installation guide on the website: &lt;a href=&quot;https://elementary.io/docs/installation#installation&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#installation&lt;/a&gt;, it includes everything you need to know to get it up and running. In short: download the .iso file, use etcher to create a bootable USB drive, use that drive to boot up the PC, begin the installation.&lt;/p&gt;&#xA;&lt;p&gt;Also, you don't exactly have to pay to use Elementary OS. It works on a &amp;quot;pay-what-you-want&amp;quot; model. But giving a tip to Elementary boosts a lot the motivation of the people who are working on the OS.&lt;/p&gt;&#xA;" OwnerUserId="25686" LastActivityDate="2022-03-26T11:46:39.777" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29733" PostTypeId="2" ParentId="28082" CreationDate="2022-03-28T22:02:03.410" Score="1" Body="&lt;p&gt;Looks like there is a new app for that!&lt;/p&gt;&#xA;&lt;h1&gt;Pin It!&lt;/h1&gt;&#xA;&lt;p&gt;See it at the &lt;a href=&quot;https://appcenter.elementary.io/com.github.ryonakano.pinit&quot; rel=&quot;nofollow noreferrer&quot;&gt;AppCenter&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/45Xji.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/45Xji.png&quot; alt=&quot;PinIt!&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="29" LastActivityDate="2022-03-28T22:02:03.410" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29735" PostTypeId="1" AcceptedAnswerId="29744" CreationDate="2022-03-29T14:54:59.533" Score="0" ViewCount="23" Body="&lt;p&gt;I am currently on Windows 11 and would like to move to ElementaryOS due to it seeming more reliable and with nice style. But before I install, is it possible to install the OS without wiping the disk? I am unsure how to dual boot properly, as I have never done it before and heard that it removes a lot of storage off my disk.&lt;/p&gt;&#xA;" OwnerUserId="28214" LastActivityDate="2022-04-01T04:14:33.500" Title="I'd like some info before installing" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29739" PostTypeId="1" AcceptedAnswerId="29741" CreationDate="2022-03-31T09:49:47.920" Score="1" ViewCount="132" Body="&lt;p&gt;I know that in Elementary &lt;strong&gt;ctrl+alt+del&lt;/strong&gt; means &lt;em&gt;Log Out&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;What I am looking for is an equivalent to windows &lt;strong&gt;ctrl+alt+del&lt;/strong&gt; which activates &lt;em&gt;Task Manager&lt;/em&gt;, so that I can close/shut down frozen task?&lt;/p&gt;&#xA;&lt;p&gt;I know that one can use &lt;strong&gt;ctrl+alt+F1&lt;/strong&gt; to get to &lt;em&gt;console&lt;/em&gt; (&lt;strong&gt;ctrl+alt+F7&lt;/strong&gt; to get back to &lt;em&gt;GUI&lt;/em&gt;) but that doesn't help me much... ?&lt;/p&gt;&#xA;&lt;p&gt;Sometimes &lt;strong&gt;ctrl+F4&lt;/strong&gt; seem to kill some active windows? but it doesn't work when things freeze...?&lt;/p&gt;&#xA;&lt;p&gt;So what's the best way of handling things like this in Elementary?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-04-15T00:18:22.780" Title="Win ctrl+alt+delete equivalent in Elementary?" Tags="|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29741" PostTypeId="2" ParentId="29739" CreationDate="2022-03-31T19:30:10.090" Score="0" Body="&lt;p&gt;I think Windows just maps that shortcut onto activating its task manager by default. You could replicate it by installing a system monitor (like &lt;a href=&quot;https://apps.gnome.org/app/gnome-system-monitor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;gnome system monitor&lt;/a&gt; or &lt;a href=&quot;https://appcenter.elementary.io/com.github.stsdc.monitor/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Monitor&lt;/a&gt; for elementary os) and bind a shortcut to it if you don't want to do that stuff via terminal.&lt;/p&gt;&#xA;&lt;p&gt;You can install Monitor via PPA instead of flatpak by following these quick instructions here: &lt;a href=&quot;https://github.com/stsdc/monitor&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/stsdc/monitor&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y software-properties-common&#xA;sudo add-apt-repository ppa:stsdc/monitor&#xA;sudo apt install com.github.stsdc.monitor&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I would check out &lt;a href=&quot;https://askubuntu.com/a/95202/672975&quot;&gt;https://askubuntu.com/a/95202/672975&lt;/a&gt; as it might answer your question.&lt;/p&gt;&#xA;" OwnerUserId="23095" LastEditorUserId="23095" LastEditDate="2022-04-15T00:18:22.780" LastActivityDate="2022-04-15T00:18:22.780" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29744" PostTypeId="2" ParentId="29735" CreationDate="2022-04-01T04:14:33.500" Score="0" Body="&lt;p&gt;I've done this several times. The following are starting points:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://averagelinuxuser.com/dualboot-linux-windows/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://averagelinuxuser.com/dualboot-linux-windows/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://itsfoss.com/guide-install-elementary-os-luna/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://itsfoss.com/guide-install-elementary-os-luna/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;General pointers:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;It's not for the faint of heart, because you have to create two new partitions: one for linux and the other very small one for the boot system, which is called grub. You have to be okay with running disk management software. Linux partitions are not NTFS so you can't ride on an existing Windows partition.&lt;/li&gt;&#xA;&lt;li&gt;You can do that either by shrinking your existing windows partition (google will be your friend) or better still or if shrinkage is not an option then adding another small disk for linux. Linux doesn't take much space and disks are cheap. I would probably recommend using a second disk if you're cautious. Though having said that I've always done it by partitioning an SSD.&lt;/li&gt;&#xA;&lt;li&gt;You can probably do this using the Windows disk manager, but if you get stuck might need to revert to the old command line diskpart.exe.&lt;/li&gt;&#xA;&lt;li&gt;Once you have the partitions in place follow the standard instructions for eOS install from a USB. Linux installation will ignore and never touch the NTFS partitions.&lt;/li&gt;&#xA;&lt;li&gt;If all is well, when you reboot you will get a grub option list with eOS at the top and Windows Boot Manager probably second on the list.  Choose which system you want to boot into.&lt;/li&gt;&#xA;&lt;li&gt;You MUST fix the Windows time vs Linux time problem. Do this by setting eOS to use local time. Again, the commands are easily googled.&lt;/li&gt;&#xA;&lt;li&gt;The age of your PC makes a difference. If the BIOS is UEFI then everything is more likely to go smoother.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="24853" LastActivityDate="2022-04-01T04:14:33.500" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29750" PostTypeId="2" ParentId="23894" CreationDate="2022-04-08T13:41:29.603" Score="0" Body="&lt;p&gt;Tried &amp;gt; flatpak update and this is what I got:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DVXAF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DVXAF.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28247" LastActivityDate="2022-04-08T13:41:29.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29753" PostTypeId="2" ParentId="4973" CreationDate="2022-04-09T01:24:20.960" Score="0" Body="&lt;p&gt;You’ll be disappointed. I have annLG 29” Ultra-Wide, recommended resolution is 2560x1080. Nax res on all Linux I’ve tried it 1920x1080.. done all the CVT, xrandr, add mode crap and won’t take.. waste of time..&lt;/p&gt;&#xA;" OwnerUserId="28250" LastActivityDate="2022-04-09T01:24:20.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29755" PostTypeId="1" CreationDate="2022-04-09T16:07:54.310" Score="1" ViewCount="119" Body="&lt;p&gt;I have an old laptop here (HP ProBook from 2014) and have been using ElementaryOS on it since I bought it. Today I installed EOS 6.1 on it.&#xA;I had a couple of problems during installation (used custom partitions and forgot the /boot partition), but now I have a running system. However, the built-in wifi does not work. It does not show up in the network settings, only ethernet, vpn, proxy.&#xA;I tried with my wifi usb stick and that worked out of the box. But I need that for my computer, so the laptop has to use its own wifi card. It did work before with EOS Hera 5.1.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;A couple of random pieces of information:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;It's not a dual boot. It's UEFI.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Before I used only one partition, this time I wanted to separate data from OS, so I put /home on its own partition.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;The built-in wifi card is a Broadcom BCM43228. Kernel module is &amp;quot;bcma&amp;quot;.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;I ran apt update and apt dist-upgrade already and restarted after that. No change.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;I followed some tutorials on the internet and they suggested to install additional drivers (bwml-source something). I did that and during installation they did a modprobe and told me &amp;quot;module wl not found&amp;quot;.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;rfkill list all returns nothing.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any ideas? I thought hardware support would be no problem on such an old, but not ancient machine...&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update August 2023:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This problem is still persistent (I recently tried it again). Newer ElementaryOS distributions seem to have a lot of &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/30209/connection-to-certain-wifi-keeps-dropping-deauthenticating-from-xxx-by-local-ch&quot;&gt;strange problems with wifi connections&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastEditorUserId="2653" LastEditDate="2023-08-05T09:14:50.737" LastActivityDate="2023-08-05T09:14:50.737" Title="Built-in Wifi not working after upgrade to Jolnir 6.1" Tags="|wifi|hp|release-jolnir|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29756" PostTypeId="1" CreationDate="2022-04-10T18:28:54.977" Score="0" ViewCount="39" Body="&lt;p&gt;Elemental v6.1&#xA;Blue Tooth keyboard&#xA;Logitech 920-004013&lt;/p&gt;&#xA;&lt;p&gt;Device shows up in Bluetooth as available on first attempt, but presents a code number on the OS screen to verify. Clicking “Pair” does nothing. The Blue tooth session gets “hung” and takes multiple “esc” button entries to clear.&#xA;Subsequent attempts show as failed to connect.&#xA;Strange thing is the keyboard worked perfect on Zorin v16.&lt;/p&gt;&#xA;" OwnerUserId="28253" LastEditorUserId="28253" LastEditDate="2022-04-10T18:49:57.053" LastActivityDate="2024-01-01T00:08:51.057" Title="Connecting Logitech KB Bluetooth issue" Tags="|keyboard|bluetooth|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29757" PostTypeId="2" ParentId="29756" CreationDate="2022-04-10T21:00:02.473" Score="0" Body="&lt;p&gt;Should have Googled more myself…&lt;/p&gt;&#xA;&lt;p&gt;bluetoothcl&lt;/p&gt;&#xA;&lt;p&gt;list to see devices&lt;/p&gt;&#xA;&lt;p&gt;disable then enable to see which MACAddress is the offending device&lt;/p&gt;&#xA;&lt;p&gt;remove the device by MAC address&lt;/p&gt;&#xA;&lt;p&gt;scan for devices&lt;/p&gt;&#xA;&lt;p&gt;trust the device&lt;/p&gt;&#xA;&lt;p&gt;pair the device&lt;/p&gt;&#xA;&lt;p&gt;Enter the key code it gives you from the device&lt;/p&gt;&#xA;&lt;p&gt;Done&lt;/p&gt;&#xA;" OwnerUserId="28253" LastActivityDate="2022-04-10T21:00:02.473" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29758" PostTypeId="1" CreationDate="2022-04-12T23:56:49.927" Score="0" ViewCount="74" Body="&lt;p&gt;The USB flash drive with the installation media boots to a login prompt!  I never see any GUI with any options! I suspect this problem is related to the ASUS motherboard (new Asus H670) and how it handles secure boot. Any clues from anyone?&lt;/p&gt;&#xA;" OwnerUserId="28259" LastActivityDate="2024-01-05T15:00:35.060" Title="Installation flash drive boots into a login screen" Tags="|system-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29759" PostTypeId="1" CreationDate="2022-04-13T05:48:37.073" Score="0" ViewCount="58" Body="&lt;p&gt;I’ve installed 6.1 on my 2015 MacBook Pro that previously was running Fedora- the installer works fine, but the desktop won’t boot.&lt;/p&gt;&#xA;&lt;p&gt;There’s what appears to be extremely minuscule text in the upper left of the screen but it’s so small I can’t read it&lt;/p&gt;&#xA;&lt;p&gt;I’m not able to reach a tty to look at logs or anything&lt;/p&gt;&#xA;&lt;p&gt;Any additional troubleshooting steps I can take?&lt;/p&gt;&#xA;&lt;p&gt;EDIT: I used LiveCD to look in the logs- it looks like there's no &lt;code&gt;/var/log/dmesg&lt;/code&gt;, and the &lt;code&gt;journal&lt;/code&gt; is empty also. I assume this mean something is going drastically wrong during boot&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[liveuser@localhost-live log]$ sudo ls -ltr&#xA;total 136&#xA;drwx------. 2  115 root   4096 Jan 19  2020 speech-dispatcher&#xA;drwxr-xr-x. 2 root root   4096 Apr 24  2020 cups&#xA;drwxr-xr-x. 2 root root   4096 Apr 12  2021 lightdm&#xA;drwxr-xr-x. 2 root root   4096 Jul 19  2021 openvpn&#xA;-rw-rw-r--. 1 root   43      0 Dec 18 16:00 wtmp&#xA;-rw-------. 1 root root      0 Dec 18 16:00 ubuntu-advantage.log&#xA;drwx------. 2 root root   4096 Dec 18 16:00 private&#xA;-rw-rw-r--. 1 root   43      0 Dec 18 16:00 lastlog&#xA;drwxr-sr-x. 2 root  101   4096 Dec 18 16:00 journal&#xA;drwxr-xr-x. 3 root root   4096 Dec 18 16:00 hp&#xA;-rw-r--r--. 1 root root      0 Dec 18 16:00 fontconfig.log&#xA;-rw-r--r--. 1 root root      0 Dec 18 16:00 faillog&#xA;-rw-rw----. 1 root   43      0 Dec 18 16:00 btmp&#xA;-rw-r--r--. 1 root root      0 Dec 18 16:00 bootstrap.log&#xA;-rw-r--r--. 1 root root    772 Apr 13 01:10 alternatives.log&#xA;drwxr-xr-x. 2 root root   4096 Apr 13 01:11 apt&#xA;-rw-r--r--. 1 root root 100979 Apr 13 01:11 dpkg.log&#xA;[liveuser@localhost-live log]$ sudo ls -ltr journal/&#xA;total 0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28261" LastEditorUserId="28261" LastEditDate="2022-04-13T06:12:06.200" LastActivityDate="2024-01-04T07:05:05.627" Title="Installed Elementary OS not booting to desktop" Tags="|install|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29760" PostTypeId="1" CreationDate="2022-04-14T00:27:58.067" Score="0" ViewCount="125" Body="&lt;p&gt;I downloaded elementaryOS on my Linuxmint desktop and burned the iso to my USB-2 pendrive. I don't want to install it over Linuxmint. I have a USB-3 pendrive I want to install ElementaryOS on. I didn't see an option for this when I booted from the USB-2 drive. I'm missing something -- not sure what to do.&lt;/p&gt;&#xA;&lt;p&gt;Update: apr 18 2022:&lt;/p&gt;&#xA;&lt;p&gt;I had the USB with the iso plugged in, and I had the 65GB usb (that I want to put Elementary on) plugged in too. It hangs right here:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;INFO: starting extracting step  INFO: Extracting&#xA;/cdrom/casper/filesystem.squashfs DEBUG: &amp;quot;unsquashfs&amp;quot; &amp;quot;-f&amp;quot; &amp;quot;-d&amp;quot;&#xA;&amp;quot;tmp/distinst.Q5bl9tzlZmEh&amp;quot; &amp;quot;/cdrom/casper - filesystem.squashfs&amp;quot;&#xA;ERROR: extracting error: archive extraction failed with status: exit&#xA;status: 1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;I reformatted the usb with the iso and put MX-21 iso on it. Then I installed this onto the flash drive without a problem. Then today, I reformatted the 64 GB drive and installed the Elementary iso on a DVD-R disk, and used it to install elementary - but I get the same error.&lt;/p&gt;&#xA;&lt;p&gt;It seems whatever Casper is, could be the problem, or it's linked to the problem.&lt;/p&gt;&#xA;" OwnerUserId="28265" LastEditorUserId="28265" LastEditDate="2022-04-18T21:39:36.883" LastActivityDate="2024-02-08T17:00:00.063" Title="Confused on installation" Tags="|system-installation|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29761" PostTypeId="2" ParentId="29759" CreationDate="2022-04-14T03:56:35.673" Score="0" Body="&lt;p&gt;After hearing that this worked fine on someone else's same MBP model and year on a reddit thread, I decided to retry without encryption, and it booted successfully!&lt;/p&gt;&#xA;" OwnerUserId="28261" LastActivityDate="2022-04-14T03:56:35.673" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29762" PostTypeId="2" ParentId="29758" CreationDate="2022-04-15T10:13:52.827" Score="0" Body="&lt;p&gt;did you find a solution? I have the same problem with a new Gigabyte B660m motherboard and have not yet found a solution.&lt;/p&gt;&#xA;&lt;p&gt;Do you have any Linux experience? If so, then you can log in with the username 'elementary' with no password and troubleshoot from there.&lt;/p&gt;&#xA;&lt;p&gt;Are you using a dedicated graphics card or an onboard graphics card?&lt;/p&gt;&#xA;" OwnerUserId="28267" LastActivityDate="2022-04-15T10:13:52.827" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29763" PostTypeId="2" ParentId="29760" CreationDate="2022-04-15T10:27:00.670" Score="0" Body="&lt;p&gt;I have not yet used Elementary OS, but do you have the the USB3 pendrive plugged in while you are trying to install? I'm assuming that this would be necessary for you to install on it. Most Linux distros give you a list of all the devices that they can find which you can install on, if you have your USB3 pendrive plugged in and it is not shown on the list, then it would likely require a lot more work to install on it if it is possible at all.&lt;/p&gt;&#xA;" OwnerUserId="28267" LastActivityDate="2022-04-15T10:27:00.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29764" PostTypeId="2" ParentId="29605" CreationDate="2022-04-15T10:44:09.403" Score="0" Body="&lt;p&gt;did you find a solution? I am having the same problem.&lt;/p&gt;&#xA;&lt;p&gt;I don't think that this is supposed to happen, can you give some more details about the hardware that you are installing on (Is it a laptop or desktop, How old is it, do you know which graphics card and motherboard that you are using?)&lt;/p&gt;&#xA;" OwnerUserId="28267" LastActivityDate="2022-04-15T10:44:09.403" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29765" PostTypeId="2" ParentId="29580" CreationDate="2022-04-15T11:18:12.780" Score="0" Body="&lt;p&gt;I am guessing that this is a bug and it happens to me as well and I have not yet found a solution. Can you tell me what computer you are installing on, e.g. is it a laptop or a desktop, how old is it, do you know which graphics card and motherboard it has?&lt;/p&gt;&#xA;&lt;p&gt;I found that the username is 'elementary' and there is no password, but this will not help you much unless you are an experienced Linux user.&lt;/p&gt;&#xA;" OwnerUserId="28267" LastActivityDate="2022-04-15T11:18:12.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29766" PostTypeId="2" ParentId="29349" CreationDate="2022-04-16T14:36:16.343" Score="0" Body="&lt;p&gt;I have the stable version of 6.1. I tried to install it to a USB, but it hangs here every time:&lt;/p&gt;&#xA;&lt;p&gt;INFO: starting extracting step&#xA;INFO: Extracting /cdrom/casper/filesystem.squashfs&#xA;DEBUG: &amp;quot;unsquashfs&amp;quot; &amp;quot;-f&amp;quot; &amp;quot;-d&amp;quot; &amp;quot;tmp/distinst.Q5bl9tzlZmEh&amp;quot; &amp;quot;/cdrom/casper - filesystem.squashfs&amp;quot;&#xA;ERROR:  extracting error: archive extraction failed with status: exit status: 1&lt;/p&gt;&#xA;" OwnerUserId="28265" LastActivityDate="2022-04-16T14:36:16.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29767" PostTypeId="2" ParentId="20791" CreationDate="2022-04-17T21:37:52.443" Score="0" Body="&lt;p&gt;Make sure OpenGL is working, or else clone hero will open and just close again with an error about libbass_fx.so&lt;/p&gt;&#xA;" OwnerUserId="28271" LastActivityDate="2022-04-17T21:37:52.443" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29768" PostTypeId="1" CreationDate="2022-04-18T14:42:57.817" Score="0" ViewCount="203" Body="&lt;p&gt;Wireless network (wifi) not detected on Dell Vostro running Elementary OS Jolnir 6.1. It used to be able to detect the wifi before. The wireless network simply no longer shows up in networks&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/PLwK5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/PLwK5.png&quot; alt=&quot;screenshot of Only Wired device detected&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But it used to detect the wireless network before and I was able to use wifi and I had some wifi connection saved by running &lt;code&gt;nmcli con show&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ktcmm.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ktcmm.png&quot; alt=&quot;screenshot of nmcli con show&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The Wireless Network adapter shows up when I run &lt;code&gt;sudo lshw -c network&lt;/code&gt;, but the status is *-network UNCLAIMED&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/X2s9a.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/X2s9a.png&quot; alt=&quot;screenshot of sudo lshw -c network&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;There is a page in &lt;a href=&quot;https://www.dell.com/support/kbdoc/en-id/000130686/how-to-troubleshoot-wireless-network-issues-in-ubuntu-linux-on-your-dell-pc&quot; rel=&quot;nofollow noreferrer&quot;&gt;Dell Support that suggests reinstalling the wifi driver&lt;/a&gt; but I cannot find the driver to download anywhere. Already tried rebooting the device to no avail.&lt;/p&gt;&#xA;" OwnerUserId="28275" LastActivityDate="2024-03-23T08:03:25.497" Title="How to solve wireless network wifi suddenly not detected on Elementary Jolnir 6.1?" Tags="|wifi|networking|drivers|internet|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29769" PostTypeId="2" ParentId="29718" CreationDate="2022-04-18T14:53:17.570" Score="0" Body="&lt;p&gt;After researching, it seems that remastering the ISO and deleting the EFI directory would have been the simplest approach. However, I admit my issue turned out to be that the boot USB was showing up twice in the boot menu, and I was selecting the one that boots in UEFI mode, not legacy mode.&lt;/p&gt;&#xA;" OwnerUserId="28176" LastActivityDate="2022-04-18T14:53:17.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29770" PostTypeId="1" AcceptedAnswerId="29771" CreationDate="2022-04-19T02:54:42.037" Score="1" ViewCount="138" Body="&lt;p&gt;Where I work, the internet requires a sign-in. &lt;em&gt;Usually,&lt;/em&gt; the &lt;a href=&quot;https://github.com/elementary/capnet-assist/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Captive Network Assistant&lt;/a&gt; pops up at the right time, and allows me to log in.&lt;/p&gt;&#xA;&lt;p&gt;But sometimes when the connection is broken, or I've closed/locked my laptop, I get a notification that I need to sign in to the network again, and the assistant is nowhere to be seen. Nothing comes up when searching in the launcher. The only way that I've been able  to launch the program in that situation is searching for it in AppCenter and then clicking &lt;strong&gt;Open&lt;/strong&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I'd like to be able to launch it from the terminal, or set a keyboard shortcut to launch it, but it doesn't work. Do I need to add something to my $PATH?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ io.elementary.capnet-assist -f &#xA;&#xA;  zsh: command not found: io.elementary.capnet-assist&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="11723" LastActivityDate="2022-04-19T06:02:27.493" Title="manually launch Captive Network Assistant?" Tags="|launcher|capnet-assist|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29771" PostTypeId="2" ParentId="29770" CreationDate="2022-04-19T06:02:27.493" Score="1" Body="&lt;p&gt;capnet-assist is a flatpak app now and you'll need to run it like this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;flatpak run io.elementary.capnet-assist&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;TIP: you can use &lt;code&gt;flatpak list&lt;/code&gt; to see all the flatpak apps installed.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2022-04-19T06:02:27.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29775" PostTypeId="2" ParentId="19310" CreationDate="2022-04-23T00:52:49.647" Score="1" Body="&lt;p&gt;Do you require Juno? You could try updating/upgrading to Jolnir.&lt;/p&gt;&#xA;" OwnerUserId="28295" LastActivityDate="2022-04-23T00:52:49.647" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29776" PostTypeId="1" CreationDate="2022-04-23T05:08:27.523" Score="0" ViewCount="59" Body="&lt;p&gt;I have Elementary os Hera (5.1.7). When I try to open the Music player with a music CD (WAV files), in the media player, the music player won't stay open. It opens when I click on it and it closes in about 5 seconds.&lt;/p&gt;&#xA;" OwnerUserId="20537" LastActivityDate="2022-04-23T05:08:27.523" Title="Elementary os music player" Tags="|music|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29778" PostTypeId="1" CreationDate="2022-04-24T04:06:58.637" Score="0" ViewCount="56" Body="&lt;p&gt;Installed the last version of Elementary OS, updated. Setup in Users and accounts autologin (don't ask for password when system starts). Reboot the laptop, OS asks me for the password. Check settings and the checkbox is off for autologin. Turn it on. Reboot. Again asks for the password.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;https://elementaryos.stackexchange.com/questions/15572/automatic-login-on-loki-will-not-work&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Tried. Didn't help.&lt;/p&gt;&#xA;" OwnerUserId="28297" LastActivityDate="2023-01-23T13:01:00.053" Title="Autologin doesn't work (resets after restart)" Tags="|security|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29780" PostTypeId="1" CreationDate="2022-04-26T11:48:01.343" Score="0" ViewCount="57" Body="&lt;p&gt;I would like to set a different shortcut to show &lt;em&gt;Shortcut Overlay&lt;/em&gt; (the default is &lt;kbd&gt;Super&lt;/kbd&gt; alone). I cannot find any relevant setting to modify. How can I define a new keyboard shortcut for this?&lt;/p&gt;&#xA;" OwnerUserId="28298" LastActivityDate="2022-11-01T19:46:46.330" Title="New keyboard shortcut to display Shortcut Overlay (instead of Super)" Tags="|keyboard-shortcuts|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29782" PostTypeId="2" ParentId="29778" CreationDate="2022-04-28T11:30:05.577" Score="1" Body="&lt;p&gt;You can try to do so using command line.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/lightdm/lightdm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;and thereafter, add the following lines,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[SeatDefaults]&#xA;autologin-user=&amp;lt;YOUR USERNAME&amp;gt;&#xA;autologin-user-timeout=0&#xA;user-session=ubuntu&#xA;greeter-session=unity-greeter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28308" LastActivityDate="2022-04-28T11:30:05.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29783" PostTypeId="2" ParentId="25235" CreationDate="2022-04-29T20:37:17.140" Score="0" Body="&lt;p&gt;It took me a few nights of trying out different fixes until I found the working solution at &lt;a href=&quot;https://askubuntu.com/a/613573/60614&quot;&gt;https://askubuntu.com/a/613573/60614&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28312" LastActivityDate="2022-04-29T20:37:17.140" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29788" PostTypeId="1" CreationDate="2022-05-04T13:18:36.920" Score="0" ViewCount="164" Body="&lt;p&gt;Assuming this hasn't been asked a hundred times, I am installing on a late-2019 13&amp;quot; MacBook Pro &lt;em&gt;&lt;strong&gt;/wo&lt;/strong&gt;&lt;/em&gt; Touch Bar or Touch ID. I am able to install Parrot OS, so this should be cake. It isn't.&lt;/p&gt;&#xA;&lt;p&gt;The initial screen comes up, asking whether I want to try or install Elementary OS, fine. When I hit return, the screen flashes some ASPCI errors in various font sizes (drivers kicking in?). It then gives a series of IO errors:&lt;/p&gt;&#xA;&lt;p&gt;Something like...&lt;/p&gt;&#xA;&lt;p&gt;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: Maybe there's something wrong with the USB cable?&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: Maybe there's something wrong with the USB cable?&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: Unable to enumerate USB device&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;Stdin: This is not a typewriter&#xA;...&lt;/p&gt;&#xA;&lt;p&gt;Basically for infinity.&lt;/p&gt;&#xA;&lt;p&gt;The &amp;quot;USB device&amp;quot; is a USB 3.2 2nd Gen 32Gig thumb drive that I just opened. And it works for all other purposes.&lt;/p&gt;&#xA;&lt;p&gt;What am I doing wrong (or almost right)?&lt;/p&gt;&#xA;" OwnerUserId="28328" LastActivityDate="2024-02-22T06:09:21.153" Title="&quot;Unable to enumerate USB device&quot; and definitely not a typewriter, installing Elementary OS on a 2019 MacBook Pro" Tags="|macbook|install|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29790" PostTypeId="1" AcceptedAnswerId="29791" CreationDate="2022-05-09T16:18:16.830" Score="0" ViewCount="207" Body="&lt;p&gt;Goodmorning everybody,&lt;/p&gt;&#xA;&lt;p&gt;pretending absolutely nothing i am here to ask you a solution to something that is to me, a real storage problem:&lt;/p&gt;&#xA;&lt;p&gt;is there a way or a software update that will make dropbox applications works by default as a perfect integration in elementary os 6.1+?&lt;/p&gt;&#xA;&lt;p&gt;Actually GUI do not allow use it.&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance&lt;/p&gt;&#xA;" OwnerUserId="28340" LastActivityDate="2022-05-10T22:45:17.577" Title="dropbox does not works in elementary os 6.1+" Tags="|dropbox|" AnswerCount="2" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="29791" PostTypeId="2" ParentId="29790" CreationDate="2022-05-09T19:56:11.420" Score="0" Body="&lt;p&gt;I found answer by myself: at this time there's no way to use dropbox in elementary os 6.x.&lt;/p&gt;&#xA;&lt;p&gt;Thanks anyway.&lt;/p&gt;&#xA;" OwnerUserId="28340" LastActivityDate="2022-05-09T19:56:11.420" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29792" PostTypeId="2" ParentId="29790" CreationDate="2022-05-10T22:45:17.577" Score="1" Body="&lt;p&gt;Dropbox does work on elementary, I use it all the time. What is missing is a status indicator, but honestly I don't even notice that anymore.&lt;/p&gt;&#xA;&lt;p&gt;My one suggestion is to enable Dropbox Syncing on Startup. From a &lt;a href=&quot;https://blog.senderolinux.com/installing-software-on-elementary-os-6/&quot; rel=&quot;nofollow noreferrer&quot;&gt;blog post&lt;/a&gt; I wrote:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;After installing Dropbox from the AppCenter (which pulls from&#xA;Flathub), “launch at startup” is not enabled by default. As a&#xA;consequence, by default the Dropbox folders only sync when the Dropbox&#xA;application is launched.&lt;/p&gt;&#xA;&lt;p&gt;You can launch Dropbox on startup to make the syncing experience more&#xA;automatic. After installing Dropbox from AppCenter, go to System&#xA;Settings &amp;gt; Applications &amp;gt; Startup, and then add Dropbox to this list.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="26142" LastActivityDate="2022-05-10T22:45:17.577" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29794" PostTypeId="1" CreationDate="2022-05-13T21:10:56.867" Score="1" ViewCount="140" Body="&lt;p&gt;I'm trying to install on raspberry pi 4. I have 8gb RAM and 128gb micro sd card. I verified the download, used etcher to install on mirco sd card. I insert the micro sd card and turn on the pi and it does not boot. Nothing happens. What do I do?&lt;/p&gt;&#xA;" OwnerUserId="28349" LastActivityDate="2024-02-05T04:04:50.657" Title="How to boot/install on raspberry pi" Tags="|boot|install|raspberry-pi|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29796" PostTypeId="1" CreationDate="2022-05-14T19:21:54.293" Score="1" ViewCount="47" Body="&lt;p&gt;Hi I am not very good with Linux, but I have some experience. I have it up and running, but the audio either from HDMI or audio jack is coming out distorted and is often delayed. I have been distro hopping trying to find a linux that has no audio issues (zero sound at all), and this is the first that actually has some sound.&lt;/p&gt;&#xA;&lt;p&gt;I have the following computer:&lt;/p&gt;&#xA;&lt;p&gt;Ryzen 9 5950x&#xA;3090 using the driver available in the app center 510.60.02&#xA;64 gigs of ram&lt;/p&gt;&#xA;&lt;p&gt;Thanks :)&lt;/p&gt;&#xA;" OwnerUserId="28352" LastActivityDate="2022-05-14T19:21:54.293" Title="Distorted / delayed sound" Tags="|audio|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29797" PostTypeId="1" CreationDate="2022-05-14T22:18:44.793" Score="1" ViewCount="35" Body="&lt;p&gt;After searching the forums here, it appears that any number of folks are having difficulty getting the default Mail app to work. No matter what I have tried, I, too, cannot configure the default Mail app to connect to Fastmail.com. It fails when testing the imap connection.&lt;/p&gt;&#xA;&lt;p&gt;All updates are current on the ElementaryOS device through apt-get.&lt;/p&gt;&#xA;&lt;p&gt;I was able to install Thunderbird, and it works just fine. I think I would just prefer the interface of the the &amp;quot;native&amp;quot; mail app on eOS.&lt;/p&gt;&#xA;&lt;p&gt;To be clear, I am aware of the fastmail requirement for using the special device password issued by fastmail and which is required for both Mail a Thunderbird to connect to Fastmail. (if you're not familiar, one has to go to their account on the Fastmail site in a web browser to generate a special password to allow that device to connect to the Fastmail service from an application other than a web browser.)&lt;/p&gt;&#xA;&lt;p&gt;(why don't I just read my mail in a web browser? I'm old, and I still refuse to use a hammer instead of a screwdriver)&lt;/p&gt;&#xA;" OwnerUserId="28354" LastEditorUserId="28354" LastEditDate="2022-05-15T04:34:07.167" LastActivityDate="2022-05-15T04:34:07.167" Title="How to connect Fastmail in Mail" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29799" PostTypeId="2" ParentId="29794" CreationDate="2022-05-16T00:28:56.497" Score="0" Body="&lt;p&gt;I've had this same thing!&lt;/p&gt;&#xA;&lt;p&gt;Raspberry Pi is an ARM device, so you'd need an ARM compatible ISO image. You have two options:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Frankenstein it yourself:&#xA;You need the Ubuntu from the rpi-imager burnt onto an sd card, and then you manually add the eOS repos yourself. Here's a link:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://techviewleo.com/install-pantheon-desktop-environment-on-ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://techviewleo.com/install-pantheon-desktop-environment-on-ubuntu/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;ol start=&quot;2&quot;&gt;&#xA;&lt;li&gt;Pay for it:&#xA;There IS an early access build for raspberry pi from the elementary team, but you have to sign up for a monthly sponsorship of $10+/mo for that. Here's that link:&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://builds.elementary.io/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://builds.elementary.io/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Best of luck!,&#xA;Jake&lt;/p&gt;&#xA;" OwnerUserId="27891" LastActivityDate="2022-05-16T00:28:56.497" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29800" PostTypeId="1" CreationDate="2022-05-17T13:23:03.737" Score="1" ViewCount="141" Body="&lt;p&gt;I am running 6.1 always up to date...&#xA;Boot partition accumulates the binaries for each kernel and becomes full very quickly...&#xA;I tried to find a way to increase it, but gparted doesnt allow me to reduce/shrink the size of the second partition even I do this from the install cd. After reducing this one, I should be able to move it at the end of the disk and then use the just-made free space to increase the size of the boot one right ? Is my understanding correct ? Any help will be appreciated, indeed.&#xA;Cheers. gg.&lt;/p&gt;&#xA;&lt;p&gt;PS: similar issue has been poped up on 2016-01-30 by user3515 but answers are irrelevant..&lt;/p&gt;&#xA;" OwnerUserId="28362" LastActivityDate="2022-05-17T13:23:03.737" Title="Size of the /boot partition too small" Tags="|system|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29802" PostTypeId="1" AcceptedAnswerId="29811" CreationDate="2022-05-19T11:55:37.310" Score="1" ViewCount="420" Body="&lt;p&gt;I'm trying to install EOS 6.1 as a dual boot alongside Windows10 on my laptop. I've already space on my SSD for EOS; I have 40GB formatted ext4 for root, 8GB for swap, and about 140GB ext4 for home.&lt;/p&gt;&#xA;&lt;p&gt;I used the custom install option, and set the root, swap, and home on the respective partitions (sda7, sda8, sda9). Looks like my sda2 is where the efi system partition is; it was initially 256MB, I expanded that to ~540MB before starting the installation (it is flagged as esp and boot on gparted). Since there was no option to &amp;quot;use&amp;quot; this partition as efi/esp, I didn't touch it, thinking EOS would detect it automatically. However, I'm running in to this error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;INFO: starting configuring bootloader step  &#xA;INFO: /dev/sda: installing bootloader for Bios  &#xA;INFO: running &amp;quot;chroot&amp;quot; &amp;quot;/tmp/distinst. oGEQDhAu7C3P&amp;quot;  &#xA;&amp;quot;grub-install&amp;quot; &amp;quot;--recheck&amp;quot; &amp;quot;--target=1386-pc&amp;quot; &amp;quot;/dev/sda&amp;quot;  &#xA;WARN: Installing for 1386-pc platform.  &#xA;WARN: grub-install: warning: this GPT partition label contains no BIOS Boot Partition; embedding won't be&#xA;possible.  &#xA;WARN: grub-install: warning: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and their use is discouraged..  &#xA;WARN: grub-install: error: will not proceed with blocklists.  &#xA;ERROR: configuring bootloader error: command failed with exit status; exit status: 1  &#xA;ERROR: errored while installing system: command failed with exit status: exit status: 1  &#xA;INFO: Install error: command failed with exit status: exit status: 1  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I'm not sure what I'm doing wrong. I've disabled secure boot and enabled legacy boot so that I can boot from the usb. Win10 continues to load fine.&#xA;My Win10 partition is sda3, and sda4 through sda6 are system recovery partitions; didn't touch them. My system is a Intel Core i5, with a 16GB ram, and 512GB SSD.&lt;/p&gt;&#xA;&lt;p&gt;Any help much appreciated! I'm not a very tech-savvy user. Thank you.&lt;/p&gt;&#xA;" OwnerUserId="28367" LastActivityDate="2022-05-24T19:15:27.470" Title="Installation help (ERROR: configuring bootloader error: command failed with exit status; exit status: 1)" Tags="|system-installation|dual-boot|grub|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29803" PostTypeId="2" ParentId="29760" CreationDate="2022-05-19T13:10:19.343" Score="-1" Body="&lt;p&gt;I've gotten this error a million times. Installing eOS has never gone smoothly for me.&#xA;I'd say redownload the iso and make sure you do the checksum for it.&#xA;If thats all good, then just run and rerun the installer again and again until you don't get the casper error and it works. That's how I have to do it any time I want to put eOS on a computer.&lt;/p&gt;&#xA;" OwnerUserId="27891" LastActivityDate="2022-05-19T13:10:19.343" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29804" PostTypeId="1" CreationDate="2022-05-19T17:04:54.123" Score="1" ViewCount="41" Body="&lt;p&gt;I've tried on three different machines but every time Elementary doesn't give the option to install alongside windows. When I try to install windows after installing Elementary windows doesn't recognize the disk format and terminates. Any thoughts?&lt;/p&gt;&#xA;" OwnerUserId="28368" LastActivityDate="2022-05-20T15:03:24.843" Title="Elementary 6.1 will not allow dual boot, wipes entire disk" Tags="|dual-boot|microsoft-windows|release-jolnir|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29808" PostTypeId="2" ParentId="22816" CreationDate="2022-05-22T15:14:07.873" Score="1" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;This is a lightly modified version of the answer I posted &lt;a href=&quot;https://elementaryos.stackexchange.com/a/29007&quot;&gt;here&lt;/a&gt;. I'm copying it over because this was marked as a related question, and it seems to have much more traffic than the other one, so an answer here would likely be able to help more people.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Elementary OS does not currently come with a GUI frontend for setting up a VNC server, most likely due to the fact that elementary OS exclusively uses its own GUI applications built from scratch in &lt;a href=&quot;https://blog.elementary.io/why-we-write-elementary-apps-in-vala/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Vala&lt;/a&gt;, and building a GUI frontend for setting up a VNC server is just a relatively low priority. It would be a good project for a Settings panel at some point, though.&lt;/p&gt;&#xA;&lt;p&gt;We are going to use &lt;a href=&quot;https://packages.ubuntu.com/focal/x11vnc&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;x11vnc&lt;/code&gt;&lt;/a&gt;, which is a fairly simple, fairly generic VNC server that works well with Pantheon and supports connecting to the login screen (i.e. after startup and before logging in). &lt;code&gt;x11vnc&lt;/code&gt; is conveniently available from elementary OS's &lt;code&gt;apt&lt;/code&gt; repositories (which for elementary OS Odin are Canonical's repositories for Ubuntu 20.04 LTS Focal Fossa). It has &lt;a href=&quot;https://manpages.ubuntu.com/manpages/focal/en/man1/x11vnc.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;tons and tons of options&lt;/a&gt; that we're just not going to use. There are other VNC servers you can use that among other things may have commercial support. Because you're here, I'm assuming you're not using one of them, so &lt;code&gt;x11vnc&lt;/code&gt; it is.&lt;/p&gt;&#xA;&lt;p&gt;We are going to use the command line in order to keep things as simple as possible.&lt;/p&gt;&#xA;&lt;p&gt;These instructions are adapted from, among other things, &lt;a href=&quot;https://jasonschaefer.com/setup-x11vnc-server-with-systemd-auto-start-up/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt;, which worked for me.&lt;/p&gt;&#xA;&lt;h2&gt;Prerequisites&lt;/h2&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;You will need &lt;code&gt;sudo&lt;/code&gt; privileges.&lt;/li&gt;&#xA;&lt;li&gt;You will need to set up OpenSSH if you haven't done so already.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; These instructions do not include steps for VNC authentication or allowing VNC through the firewall because it assumes you will use an SSH tunnel. This keeps things simple and also more secure.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;If you haven't set up SSH, in order to do so in the very most basic way with default settings, run each of the following commands in Terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install openssh-server -y&#xA;$ sudo systemctl enable ssh&#xA;$ sudo systemctl start ssh&#xA;$ sudo ufw allow ssh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Install &lt;code&gt;x11vnc&lt;/code&gt;&lt;/h2&gt;&#xA;&lt;p&gt;In Terminal (or over SSH):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo apt install x11vnc -y&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h2&gt;Create a &lt;code&gt;systemd&lt;/code&gt; service (so &lt;code&gt;x11vnc&lt;/code&gt; runs automatically)&lt;/h2&gt;&#xA;&lt;p&gt;Open a new file in &lt;a href=&quot;https://www.nano-editor.org/&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;nano&lt;/code&gt;&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo nano /etc/systemd/system/x11vnc.service&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Paste this into the file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Unit]&#xA;Description=Start x11vnc at startup.&#xA;After=multi-user.target&#xA;&#xA;[Service]&#xA;Type=simple&#xA;ExecStart=/usr/bin/x11vnc -auth guess -forever -loop -noxdamage -repeat -rfbport 5900 -shared -o /var/log/x11vnc.log&#xA;&#xA;[Install]&#xA;WantedBy=multi-user.target&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Save the file by typing &lt;code&gt;Ctrl-O&lt;/code&gt; and exit &lt;code&gt;nano&lt;/code&gt; by typing &lt;code&gt;Ctrl-X&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;h2&gt;Enable and start the &lt;code&gt;x11vnc&lt;/code&gt; service&lt;/h2&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo systemctl enable x11vnc&#xA;$ sudo systemctl start x11vnc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;x11vnc&lt;/code&gt; should now be running, and it should start automatically whenever you log in locally.&lt;/p&gt;&#xA;&lt;h1&gt;To log in remotely&lt;/h1&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; This is assuming the client machine is on the same local network as the host machine. If you are connecting to the host machine over WAN, I'll assume you already know the public hostname or IP address.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h2&gt;Gather the necessary information&lt;/h2&gt;&#xA;&lt;p&gt;To get the host machine's hostname, on the host machine, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ hostname&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should print the host machine's hostname, e.g. &lt;code&gt;foobar&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If, further in the instructions, the hostname doesn't work, you can use the IP address instead. To get the host machine's IP address, on the host machine, run:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ hostname -I&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This should print all of the host machine's IP addresses, like so:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;192.168.XXX.XXX [a bunch of ipv6 addresses follow]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can probably just use the first one, i.e. the ipv4 address.&lt;/p&gt;&#xA;&lt;h2&gt;Enter the information on the client computer&lt;/h2&gt;&#xA;&lt;p&gt;On the client computer, use the following information:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The hostname, e.g. &lt;code&gt;foobar&lt;/code&gt; plus &lt;code&gt;.local&lt;/code&gt;, or the IP address from above&lt;/li&gt;&#xA;&lt;li&gt;Port &lt;code&gt;22&lt;/code&gt;, i.e. SSH&lt;/li&gt;&#xA;&lt;li&gt;Whatever login information you use for SSH, which should by default be your local login username and password on the host computer&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h2&gt;Example client setup: Edovia Screens&lt;/h2&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;Note:&lt;/strong&gt; My client computer is a MacBook, and I'm using &lt;a href=&quot;https://edovia.com/en/screens-mac/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Edovia Screens&lt;/a&gt; because &lt;a href=&quot;https://en.wikipedia.org/wiki/Screen_Sharing&quot; rel=&quot;nofollow noreferrer&quot;&gt;Apple Screen Sharing&lt;/a&gt; doesn't like the authentication we're using. Because it's what I'm using to test these instructions as I write them, the following instructions use Edovia Screens as the example. If I figure out a way to use Apple Screen Sharing I'll update these instructions. If someone with edit privileges wants to add examples for other client platforms, feel free.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;In Edovia Screens, click the &lt;code&gt;+&lt;/code&gt; icon in the toolbar and select &lt;code&gt;New Screen&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;In the first popup, click &lt;code&gt;Custom...&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;In the second popup, enter the information as follows:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;Name&lt;/code&gt; is the &amp;quot;pretty&amp;quot; display name for the bookmarked host computer, e.g. &lt;code&gt;Foo Bar&lt;/code&gt; (i.e. you can use capitalization and spaces)&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Address or Hostname&lt;/code&gt; is the hostname or IP address from above, e.g. &lt;code&gt;foobar.local&lt;/code&gt; or &lt;code&gt;192.168.XXX.XXX&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Operating System&lt;/code&gt; is &lt;code&gt;Linux&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;Authentication type&lt;/code&gt; is &lt;code&gt;None&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Click on the &lt;code&gt;Secure Connection&lt;/code&gt; tab and do the following:&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Check &lt;code&gt;Enable Secure Connections&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Enter your local login username and password from the remote computer (unless you are using SSH keys)&lt;/li&gt;&#xA;&lt;li&gt;Check &lt;code&gt;Enable Secure Connections on Local Network&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Click &lt;code&gt;Save&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Your Linux computer should now appear in the lefthand side of the main Edovia Screens window, with an illustration of &lt;a href=&quot;https://en.wikipedia.org/wiki/Tux_(mascot)&quot; rel=&quot;nofollow noreferrer&quot;&gt;Tux&lt;/a&gt; the penguin. (This image will be replaced with a screenshot each time you close a VNC session.)&lt;/p&gt;&#xA;&lt;p&gt;To open a VNC connection to the host computer, double-click on the representation of it in the main Edovia Screens window.&lt;/p&gt;&#xA;&lt;h1&gt;Caveats&lt;/h1&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;I haven't tested this with any clients other than Edovia Screens. My apologies that I'm only testing this on a piece of paid Mac software that costs $30.&lt;/li&gt;&#xA;&lt;li&gt;This is almost certainly not the best way of doing things. It's just relatively simple and relatively secure.&lt;/li&gt;&#xA;&lt;li&gt;I haven't tested this using a host computer with multiple login (i.e. human) user accounts. If you have multiple login users on your host computer, you may have to do additional configuration.&lt;/li&gt;&#xA;&lt;li&gt;While you do need &lt;code&gt;sudo&lt;/code&gt; privileges in order to set this up, I don't know if you need &lt;code&gt;sudo&lt;/code&gt; privileges in order to log in remotely (i.e. on a managed host computer where some login users may not have &lt;code&gt;sudo&lt;/code&gt; privileges).&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="27186" LastActivityDate="2022-05-22T15:14:07.873" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29811" PostTypeId="2" ParentId="29802" CreationDate="2022-05-24T19:15:27.470" Score="0" Body="&lt;p&gt;For future reference, two things helped: one, formatting the usb with gpt (rufus was defaulting to mbr); two, using a different usb drive.&lt;/p&gt;&#xA;" OwnerUserId="28367" LastActivityDate="2022-05-24T19:15:27.470" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29812" PostTypeId="1" CreationDate="2022-05-25T09:00:49.320" Score="0" ViewCount="66" Body="&lt;p&gt;I have a problem with VMware Horizon client v2203 on ElementaryOS 6.1&lt;/p&gt;&#xA;&lt;p&gt;The client installs fine with absolutely no errors but when I click on the launch icon it just exits the app before even raising a window for it.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Reinstallation, reboot&lt;/strong&gt; didn't help and there is literally no info about any similar issues by anyone else.&lt;/p&gt;&#xA;&lt;p&gt;Any advice is appreciated, other than what I have &lt;strong&gt;already tried&lt;/strong&gt; and mentioned above.&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&lt;p&gt;Aladar&lt;/p&gt;&#xA;" OwnerUserId="28379" LastActivityDate="2022-10-23T00:01:40.200" Title="VMWare Horizon Client v2203 fails to launch on Elementary OS 6.1 after fresh installation" Tags="|software-installation|thirdpartyapps|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29813" PostTypeId="2" ParentId="29812" CreationDate="2022-05-25T22:06:33.097" Score="1" Body="&lt;p&gt;After installing it indeed, the window does not open. Trying to run it form the Terminal gives us some nice clues:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/F4ZnJ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/F4ZnJ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;And the issue seems to be pretty common with many distros.&#xA;In short, uncomment the &lt;code&gt;#session required pam_loginuid.so&lt;/code&gt; line in &lt;code&gt;/etc/pam.d/lightdm&lt;/code&gt; (or &lt;code&gt;/etc/pam/lightdm-autologin&lt;/code&gt; if you use autologin). After a restart, the application launches normally (seems to not like dark mode too well though...)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hXfO2.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hXfO2.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;More info on this &lt;a href=&quot;https://www.reddit.com/r/VMwareHorizon/comments/u11y1w/segmentation_fault_on_linux_303/&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, credit to the wonderful person who figured it all out.&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2022-05-25T22:12:03.437" LastActivityDate="2022-05-25T22:12:03.437" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29814" PostTypeId="1" CreationDate="2022-05-26T13:08:16.053" Score="0" ViewCount="28" Body="&lt;p&gt;I have a file &lt;code&gt;Program.flatpak&lt;/code&gt;.  I can't find any way to open it.&lt;/p&gt;&#xA;&lt;p&gt;Every google search I've found merely states that Elementary OS has flatpak, but gives no details about how or where or what that means.&lt;/p&gt;&#xA;&lt;p&gt;I tried typing &lt;code&gt;$ flatpak&lt;/code&gt; into console, but it yields no results.&lt;/p&gt;&#xA;&lt;p&gt;So I tried installing &lt;code&gt;$ sudo apt install flatpak&lt;/code&gt; and it says nothing has been updated.&lt;/p&gt;&#xA;&lt;p&gt;Apparently flatpak is here -- somewhere -- but how do I make it open a flatpak file?&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2024-02-15T17:05:05.603" Title="How do I open a flatpak file on EOS 5.1.7?" Tags="|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29815" PostTypeId="2" ParentId="29814" CreationDate="2022-05-26T13:13:49.307" Score="0" Body="&lt;p&gt;Found on &lt;a href=&quot;https://www.reddit.com/r/flatpak/comments/iigaym/how_can_i_install_or_run_a_flatpak_file/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Reddit of all places&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;$ flatpak install path/to/file&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I'm going to put in a feature request to have this be something EOS handles on its own.&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2022-05-26T13:13:49.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29816" PostTypeId="1" AcceptedAnswerId="29848" CreationDate="2022-05-27T16:11:22.057" Score="0" ViewCount="149" Body="&lt;p&gt;Is there a recommended alternative for Libre Office?&lt;/p&gt;&#xA;&lt;p&gt;preferably available as a flatpak for elementary OS6?&lt;/p&gt;&#xA;&lt;p&gt;I have frequent trouble with LibreOffice Calc freezing the whole elementary.&#xA;The only way out is to restart the PC.&lt;/p&gt;&#xA;&lt;p&gt;I have searched interweb and it seems I am not the only one suffering this.&lt;/p&gt;&#xA;&lt;p&gt;I have tried all suggested remedies/settings with no change ...&lt;/p&gt;&#xA;&lt;p&gt;It is entirely possible that the culprit is my hardware?&lt;/p&gt;&#xA;&lt;p&gt;(Yes, I have installed correct drivers for my nvidia GPU)&lt;/p&gt;&#xA;&lt;p&gt;but I will not be able to change it easily or quickly - I am stuck&lt;/p&gt;&#xA;&lt;p&gt;so... what alternatives are you using/suggesting? help, please&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-12-14T20:31:14.973" Title="alternatives to Libre Office?" Tags="|applications|appcenter|libreoffice|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29818" PostTypeId="2" ParentId="2295" CreationDate="2022-05-28T15:23:20.190" Score="0" Body="&lt;p&gt;I had the same problem with Elementary os , is a problem caused by the video driver nouveau , here is the link of the discussion of the problem ( &lt;a href=&quot;https://bbs.archlinux.org/viewtopic.php?id=234763&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bbs.archlinux.org/viewtopic.php?id=234763&lt;/a&gt; ) .&#xA;I solved with this command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo ubuntu-drivers autoinstall&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;used it since 1 month and it seems to be fine , before while using it 8 hours it froze 3 times&lt;/p&gt;&#xA;" OwnerUserId="28387" LastEditorUserId="28387" LastEditDate="2022-07-26T22:12:49.100" LastActivityDate="2022-07-26T22:12:49.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29819" PostTypeId="2" ParentId="29621" CreationDate="2022-05-29T00:19:18.810" Score="0" Body="&lt;p&gt;Sry, linux noob here.&#xA;eOS 6.1 has been running (more or less) flawlessly for about five months now.&#xA;Only issue I had in the past was that sometimes it froze. This happened once to a few times a week. If I wait long enough it just continues... sometimes. But I sometimes am an impatient person, so I reboot. After a cold restart and reboot I see the notification for &amp;quot;new updates available&amp;quot;. Always after a freeze/reboot. This can't be a coincidence IMHO.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;But OT, I have been having this same issue since today...&#xA;total freeze after what feels like the same amount of time (like 15 min. after boot or so). But I have eOS installed on an encrypted drive and run Virtual Box on eOS for other OSes.&lt;/p&gt;&#xA;&lt;p&gt;Keyboard/Mouse dead, so no way to access tty or do the reboot-thing (that ain't working anyway).&lt;/p&gt;&#xA;&lt;p&gt;Is there like a log one can dig into?&#xA;Or some program that one can run that logs everything in real time until the point of failure?&lt;/p&gt;&#xA;&lt;p&gt;thx&#xA;love n peace&lt;/p&gt;&#xA;" OwnerUserId="28389" LastActivityDate="2022-05-29T00:19:18.810" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29820" PostTypeId="1" CreationDate="2022-05-29T18:59:25.697" Score="0" ViewCount="108" Body="&lt;p&gt;I am currently using a linux distro not supported by my legacy nvidia driver and so i will like to saitch to one that is supported i would like to know if elementary supports legacy nvidia graphics.&lt;/p&gt;&#xA;&lt;p&gt;And what has been the experience for nvidia users?&lt;/p&gt;&#xA;" OwnerUserId="28392" LastActivityDate="2024-02-19T11:05:35.637" Title="Does elementary os support nvidia geforce GT 525M" Tags="|updates|display|nvidia|elementary-project|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29821" PostTypeId="2" ParentId="29820" CreationDate="2022-05-30T06:16:10.300" Score="0" Body="&lt;p&gt;elementaryOS is Ubuntu 20.04 based OS, which could broaden your search for solutions.&lt;/p&gt;&#xA;&lt;p&gt;Looking at Hardware for Linux page it should work:&#xA;&lt;a href=&quot;https://linux-hardware.org/index.php?id=pci:10de-0df5-1028-04b6&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linux-hardware.org/index.php?id=pci:10de-0df5-1028-04b6&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28394" LastActivityDate="2022-05-30T06:16:10.300" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29822" PostTypeId="1" CreationDate="2022-05-30T08:36:26.947" Score="0" ViewCount="178" Body="&lt;p&gt;I just installed elementary OS 6.1 Jólnir and are trying to setup the screen resolution.&lt;/p&gt;&#xA;&lt;p&gt;I've got the 5K LG screen which has a native resolution of 5120x2880. My first thought were to choose 2560x1440 and use the 2x scaling option. That option wasn't availble in the settings but I DuckDuckGo'd and used xrandr to add the 2560x1440 resolution.&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately the UI is way to big. I went ahead and added 5120x2880 and now the UI is the right size but not sharp anymore.&lt;/p&gt;&#xA;&lt;p&gt;How do I keep UI the right size but double the resolution?&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance.&lt;/p&gt;&#xA;" OwnerUserId="15143" LastActivityDate="2024-02-19T16:09:06.017" Title="How to set the right display scaling factor?" Tags="|resolution|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29824" PostTypeId="2" ParentId="29822" CreationDate="2022-05-30T10:16:54.100" Score="0" Body="&lt;p&gt;Ok, it turns out that this was a setting in Parallels Desktop that restricted the full resolution to the virtual machine.&lt;/p&gt;&#xA;&lt;p&gt;You have to change Hardware/Graphics/Resolution to 'More space' instead of 'Scaled'.&lt;/p&gt;&#xA;" OwnerUserId="15143" LastActivityDate="2022-05-30T10:16:54.100" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29825" PostTypeId="2" ParentId="29788" CreationDate="2022-06-01T18:30:33.307" Score="0" Body="&lt;p&gt;No solution, but for solidarity - I have a very similar problem installing Elementary OS on a 2017 Macbook Pro.&#xA;Getting a seemingly endless stream of&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;stdin: Invalid argument&#xA;stdin: Not a typewriter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After pressing return a few dozen times it gets to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Unable to find a medium container a live file system&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then it goes through some unsuccessful attempts to netboot and drops to initramfs shell (it's a bit tricky though, since whatever commands you type appear somewhere below the edge of screen and only become visible after spamming return many times).&lt;/p&gt;&#xA;&lt;p&gt;Theoretically it should be possible to troubleshoot/boot Linux via initramfs, but I don't know how to do that. I also tried booting manually from the grub command line (following instructions &lt;a href=&quot;https://unix.stackexchange.com/questions/329926/grub-starts-in-command-line-after-reboot&quot;&gt;here&lt;/a&gt;) but that just dropped me back to the elementary installation menu.&lt;/p&gt;&#xA;&lt;p&gt;My working hypothesis is that it happens because Mac has problems reading the USB drive properly, so I'm looking into options to install Linux on a disk partition without employing USB.&lt;/p&gt;&#xA;&lt;p&gt;Meanwhile, if you had any breakthroughs in your struggle, I'd be delighted to hear about them.&lt;/p&gt;&#xA;" OwnerUserId="28404" LastActivityDate="2022-06-01T18:30:33.307" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29827" PostTypeId="1" CreationDate="2022-06-02T23:34:50.873" Score="0" ViewCount="134" Body="&lt;p&gt;&lt;code&gt;lightdm&lt;/code&gt; not working anymore?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo lightdm --test-mode --debug&#xA;[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log&#xA;[+0.00s] DEBUG: Starting Light Display Manager 1.30.0, UID=0 PID=6123&#xA;[+0.00s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-disable-guest.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-disable-log-backup.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf&#xA;[+0.00s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/60-lightdm-autologin-greeter.conf&#xA;[+0.00s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d&#xA;[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf.d/lightdm-autologin-greeter.conf&#xA;[+0.00s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf&#xA;[+0.00s] DEBUG: Registered seat module local&#xA;[+0.00s] DEBUG: Registered seat module xremote&#xA;[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager&#xA;[+0.00s] DEBUG: _g_io_module_get_default: Found default implementation local (GLocalVfs) for ?gio-vfs?&#xA;[+0.00s] DEBUG: Monitoring logind for seats&#xA;[+0.00s] DEBUG: New seat added from logind: seat0&#xA;[+0.00s] DEBUG: Seat seat0: Loading properties from config section Seat:*&#xA;[+0.00s] DEBUG: Seat seat0: Starting&#xA;[+0.00s] DEBUG: Seat seat0: Creating greeter session&#xA;[+0.00s] DEBUG: Seat seat0: Creating display server of type x&#xA;[+0.00s] DEBUG: posix_spawn avoided (fd close requested)&#xA;[+0.00s] DEBUG: Using VT 7&#xA;[+0.00s] DEBUG: Seat seat0: Starting local X display on VT 7&#xA;[+0.00s] DEBUG: XServer 0: Logging to /var/log/lightdm/x-0.log&#xA;[+0.00s] DEBUG: XServer 0: Can't launch X server X -core, not found in path&#xA;[+0.00s] DEBUG: XServer 0: X server stopped&#xA;[+0.00s] DEBUG: Releasing VT 7&#xA;[+0.00s] DEBUG: Seat seat0: Display server stopped&#xA;[+0.00s] DEBUG: Seat seat0: Can't create display server for greeter&#xA;[+0.00s] DEBUG: Seat seat0: Session stopped&#xA;[+0.00s] DEBUG: Seat seat0: Stopping display server, no sessions require it&#xA;[+0.00s] DEBUG: Seat seat0: Stopping&#xA;[+0.00s] DEBUG: Seat seat0: Stopped&#xA;[+0.00s] DEBUG: Failed to start seat: seat0    &#xA;&#xA;$ cat /etc/os-release&#xA;NAME=&amp;quot;elementary OS&amp;quot;&#xA;VERSION=&amp;quot;6.1 Jólnir&amp;quot;&#xA;ID=elementary&#xA;ID_LIKE=ubuntu&#xA;PRETTY_NAME=&amp;quot;elementary OS 6.1 Jólnir&amp;quot;&#xA;VERSION_CODENAME=jolnir&#xA;UBUNTU_CODENAME=focal&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26159" LastActivityDate="2022-06-02T23:34:50.873" Title="lightdm stopped working" Tags="|greeter|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29828" PostTypeId="1" CreationDate="2022-06-03T15:31:07.447" Score="0" ViewCount="135" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/1PHw8.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/1PHw8.jpg&quot; alt=&quot;error after entering password&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Recently installed &lt;a href=&quot;https://github.com/dahliaOS/pangolin_desktop&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/dahliaOS/pangolin_desktop&lt;/a&gt; from the instructions: &lt;a href=&quot;https://docs.dahliaos.io/pangolin/pangolin-linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://docs.dahliaos.io/pangolin/pangolin-linux&lt;/a&gt; later ran uninstall.sh&#xA;Everything was smooth, no errors till now.&lt;/p&gt;&#xA;&lt;p&gt;After immediately reboot facing this error after entering correct password. How to get into pantheon desktop?&lt;/p&gt;&#xA;" OwnerUserId="28408" LastEditorUserId="28408" LastEditDate="2022-06-03T15:32:57.900" LastActivityDate="2022-07-05T10:03:15.387" Title="(URGENT) Unable to log in: session retuned error code 1" Tags="|greeter|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29830" PostTypeId="2" ParentId="29816" CreationDate="2022-06-05T10:28:40.917" Score="0" Body="&lt;p&gt;I am trying Apache OpenOffice 4.1.12&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.openoffice.org/download/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.openoffice.org/download/index.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;very good installation instructions and easy to get going&lt;/p&gt;&#xA;&lt;p&gt;So far it seems OK (hasn't frozen once yet...)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-06-05T10:28:40.917" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29831" PostTypeId="1" CreationDate="2022-06-05T16:23:01.223" Score="0" ViewCount="46" Body="&lt;p&gt;If I'm logged in as Administrator then why am I not allowed full access to my files on my external hard drives?&#xA;I have two ext hard drives that were previously formatted with Mac OSX, now I'm connecting them to my Dell laptop running EOS 6.1.&#xA;The file permissions on these drives are messed up, some folders completely inaccessible others readable but can't copy etc.&#xA;I also have an SD card running on an ext mp3 player which is formatted by the mp3 player, this too has similar problems.&lt;/p&gt;&#xA;&lt;p&gt;I'm a noob and so not great at terminal commands but able to follow clear instructions if i could find them. Many other questions about this topic do not appear to provide a solution if I'm already logged in as administrator.&#xA;Any help much appreciated!&lt;/p&gt;&#xA;" OwnerUserId="27216" LastActivityDate="2022-06-05T16:23:01.223" Title="File permissions on mounted drives and inaccessible folders" Tags="|permissions|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="29832" PostTypeId="2" ParentId="10364" CreationDate="2022-06-07T00:12:08.960" Score="0" Body="&lt;p&gt;It might not be the you ubuntu version but try this one:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://phoenixnap.com/kb/install-ruby-ubuntu&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://phoenixnap.com/kb/install-ruby-ubuntu&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28421" LastActivityDate="2022-06-07T00:12:08.960" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29834" PostTypeId="1" CreationDate="2022-06-07T17:43:57.583" Score="0" ViewCount="1486" Body="&lt;p&gt;I want to install the software : &amp;quot;GParted&amp;quot;. But, I couldn't find it!&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Where can I find it?&lt;/li&gt;&#xA;&lt;li&gt;How can I install GParted?&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="28422" LastEditorUserId="129" LastEditDate="2022-08-06T07:49:47.893" LastActivityDate="2023-12-29T10:06:15.757" Title="How to install GParted?" Tags="|system-installation|software-installation|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29835" PostTypeId="2" ParentId="29834" CreationDate="2022-06-08T09:12:11.257" Score="0" Body="&lt;p&gt;Please first check whether an answer is available by searching through Google before raising it as a question here.&lt;/p&gt;&#xA;&lt;p&gt;To install gparted&lt;/p&gt;&#xA;&lt;p&gt;Open a terminal using &lt;code&gt;super+T or Win+T&lt;/code&gt; or from the applications menu.&lt;/p&gt;&#xA;&lt;p&gt;First run&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;then&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Similarly to remove run,&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt remove gparted&#xA;sudo apt autoremove&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28364" LastEditorUserId="28364" LastEditDate="2022-06-08T09:15:49.267" LastActivityDate="2022-06-08T09:15:49.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29836" PostTypeId="2" ParentId="29208" CreationDate="2022-06-08T19:06:04.867" Score="0" Body="&lt;p&gt;There is no longer support for this kind of authentication.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;To help keep your account secure, from May 30, 2022, ​​Google no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Important: This deadline does not apply to Google Workspace or Google Cloud Identity customers. The enforcement date for these customers will be announced on the Workspace blog at a later date.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://support.google.com/accounts/answer/6010255?hl=en&quot; rel=&quot;nofollow noreferrer&quot;&gt;reference&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28429" LastActivityDate="2022-06-08T19:06:04.867" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29837" PostTypeId="1" AcceptedAnswerId="29838" CreationDate="2022-06-09T03:21:58.527" Score="0" ViewCount="51" Body="&lt;p&gt;I was trying to install elementary-tweaks using the instructions from their github &lt;a href=&quot;https://github.com/elementary-tweaks/elementary-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;page&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I first did a&#xA;&lt;code&gt;sudo apt install software-properties-common&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;Then &lt;code&gt;sudo add-apt-repository ppa:philip.scott/elementary-tweaks &amp;amp;&amp;amp; sudo apt install elementary-tweaks&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Which got me this error :&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install elementary-tweaks&#xA;Reading package lists... Done&#xA;Building dependency tree       &#xA;Reading state information... Done&#xA;elementary-tweaks is already the newest version (1.0-0~202010170103~ubuntu6.0.1).&#xA;You might want to run 'apt --fix-broken install' to correct these.&#xA;The following packages have unmet dependencies:&#xA; elementary-tweaks : Depends: libgranite5 (&amp;gt;= 0.2.0) but it is not going to be installed&#xA;E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have tried several solutions from this askUbuntu &lt;a href=&quot;https://askubuntu.com/questions/716915/dpkg-error-processing-packages-cannot-complete-install-desktop-gui-from-termina&quot;&gt;page&lt;/a&gt; but it didn't help.&lt;/p&gt;&#xA;" OwnerUserId="28430" LastActivityDate="2022-06-09T14:42:36.703" Title="Unmet Dependancy Error while installing new package" Tags="|elementary-website|package-management|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29838" PostTypeId="2" ParentId="29837" CreationDate="2022-06-09T14:42:36.703" Score="0" Body="&lt;p&gt;elementary-tweaks are not supported in 6.x versions of elementaryOS. You should be installing pantheon-tweaks from &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/pantheon-tweaks/pantheon-tweaks&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerDisplayName="user28433" LastActivityDate="2022-06-09T14:42:36.703" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29841" PostTypeId="2" ParentId="5143" CreationDate="2022-06-10T09:24:08.767" Score="0" Body="&lt;p&gt;As ElementaryOS team gravitated towards pushing the default apps as containerized Flatpaks. The current camera app -and many others- can be removed through the flatpak client itself. The command to go is&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo flatpak uninstall io.elementary.camera&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24570" LastActivityDate="2022-06-10T09:24:08.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29842" PostTypeId="2" ParentId="25353" CreationDate="2022-06-11T19:05:48.803" Score="1" Body="&lt;p&gt;Run this:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install --reinstall org.gnome.fileroller&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Tested and works on Elementary OS 6.1 Jolnir&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/iviLZ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/iviLZ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/rNTMj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rNTMj.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14851" LastActivityDate="2022-06-11T19:05:48.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29843" PostTypeId="2" ParentId="28547" CreationDate="2022-06-11T19:34:16.753" Score="0" Body="&lt;h3&gt;Problem&lt;/h3&gt;&#xA;&lt;p&gt;For now, it is impossible (in conventional ways) to remove the single click on Pantheon Files (Elementary OS 6.1 Jolnir).&lt;/p&gt;&#xA;&lt;h3&gt;Solution&lt;/h3&gt;&#xA;&lt;p&gt;The solution I found, is to install the Nautilus file manager. It is very similar to Pantheon Files, and you can choose between one-click or double-click behaviour.&lt;/p&gt;&#xA;&lt;h3&gt;What you must to do&lt;/h3&gt;&#xA;&lt;p&gt;Just install and start using Nautilus instead of Pantheon Files.&lt;/p&gt;&#xA;&lt;h3&gt;How to&lt;/h3&gt;&#xA;&lt;p&gt;Just run the command below in a terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install -y nautilus&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h3&gt;After installing...&lt;/h3&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open Nautilus&lt;/li&gt;&#xA;&lt;li&gt;Go to Nautilus settings&lt;/li&gt;&#xA;&lt;li&gt;Choose the Preferences option&lt;/li&gt;&#xA;&lt;li&gt;Go to the &amp;quot;Behavior&amp;quot; tab&lt;/li&gt;&#xA;&lt;li&gt;Choose the option &amp;quot;Double Click to Open Items&amp;quot;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ntzYs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ntzYs.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;That's the good side of Linux, if a tool doesn't give you what you want, you install another and solve your problem.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;h3&gt;Compare&lt;/h3&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Sh2CG.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Sh2CG.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="14851" LastEditorUserId="14851" LastEditDate="2022-06-11T19:45:36.507" LastActivityDate="2022-06-11T19:45:36.507" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29845" PostTypeId="2" ParentId="29108" CreationDate="2022-06-14T06:58:47.790" Score="0" Body="&lt;p&gt;I have tried for the solution, since I am from India, so I tried to remove the &amp;quot;in.&amp;quot; eg. &amp;quot;deb &lt;a href=&quot;http://in.archive.ubuntu.com/ubuntu/&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://in.archive.ubuntu.com/ubuntu/&lt;/a&gt; focal main restricted&amp;quot; many other lines were also there but we have to target deb &lt;a href=&quot;http://in.archive&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://in.archive&lt;/a&gt; .... to deb http://archive.... means we have to remove &amp;quot;in.&amp;quot; from all the lines.&#xA;After that just run the commands below&#xA;sudo rm -rf /var/lib/apt/lists/*&#xA;sudo rm -rf /etc/apt/sources.list.d/*&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  then start &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;apt-get update&#xA;apt-get upgrade&#xA;apt-get dist-upgrade&#xA;&amp;amp; apt autoremove&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  .............that's it folks &amp;amp; your system upgrades.......&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;IT WORKED FOR ME........ MIGHT HELP YOU ALL TOO......BEST OF LUCK......&lt;/p&gt;&#xA;" OwnerUserId="28449" LastActivityDate="2022-06-14T06:58:47.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29846" PostTypeId="1" CreationDate="2022-06-16T00:13:33.517" Score="0" ViewCount="46" Body="&lt;p&gt;Is there a way to move the Applications menu from the upper left corner to the dock somewhere?  So it's more Mac like?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="28455" LastActivityDate="2024-03-18T16:07:15.933" Title="Moving The Applications Menu To the Dock" Tags="|applications|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29847" PostTypeId="1" CreationDate="2022-06-16T11:14:33.363" Score="0" ViewCount="267" Body="&lt;p&gt;Just installed Elementary OS 6.1 on my HP x2 Detachable 10-p0XX, everything was working just fine (sound too). After updating all apps from app center and rebooting device, sound got lost. I can see my audio device in alsamixer, it is unmuted, I can control volume using both tray icon and alsamixer, but the speakers don't make a sound.&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;cat /proc/asound/cards&lt;/code&gt; gives mi following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt; 0 [Audio          ]: HdmiLpeAudio - Intel HDMI/DP LPE Audio&#xA;                      Intel HDMI/DP LPE Audio&#xA; 1 [rt5640         ]: SOF - sof-bytcht rt5640&#xA;                      HP-HPx2Detachable10_p0XX--827C&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've tried reinstalling pulseaudio, setting rt5640 as default by creating /etc/asound.conf. Nothing changed.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to fix it without reinstalling system?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xZdmK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xZdmK.png&quot; alt=&quot;Alsamixer&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dDR4H.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dDR4H.png&quot; alt=&quot;built-in mixer&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28457" LastActivityDate="2024-03-09T00:06:01.270" Title="Elementary OS 6.1 Jólnir no sound" Tags="|audio|release-jolnir|alsa|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29848" PostTypeId="2" ParentId="29816" CreationDate="2022-06-16T13:25:22.090" Score="1" Body="&lt;p&gt;Been using OnlyOffice for quite sometime, give it a try.. it's available in flatpak as well&lt;/p&gt;&#xA;" OwnerUserId="28458" LastActivityDate="2022-06-16T13:25:22.090" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29851" PostTypeId="2" ParentId="29847" CreationDate="2022-06-17T21:52:25.557" Score="0" Body="&lt;p&gt;Got it by unmuting DAC MIXL, DAc MIXR, SPOR MIX DAC R1, SPOR MIX DAC L1 for my speakers, and all HP and HPO with Stereo DAC MIXR DAC L1&amp;amp;R1 for my headset using alsamixer.&lt;/p&gt;&#xA;" OwnerUserId="28457" LastActivityDate="2022-06-17T21:52:25.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29852" PostTypeId="1" CreationDate="2022-06-18T07:42:29.310" Score="1" ViewCount="17" Body="&lt;p&gt;My iMac has an AMD Radeon R9 M395. I just installed elementary on it a few days ago. It's the first time I've installed Linux on it. As far as I can tell it's not detecting or using my graphics card. Is it supported? Is there anything I can do to get it to work?&lt;/p&gt;&#xA;" OwnerUserId="28464" LastEditorUserId="28464" LastEditDate="2022-06-18T18:23:27.997" LastActivityDate="2022-06-18T18:23:27.997" Title="AMD Card on my 2015 iMac not detected" Tags="|graphics|radeon|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29853" PostTypeId="2" ParentId="29723" CreationDate="2022-06-18T12:01:12.390" Score="0" Body="&lt;p&gt;Try to edit your /etc/apt/sources.list. Replacing all 'mirror://mirrors.ubuntu.com/mirrors.txt' urls with 'http://archive.ubuntu.com/ubuntu/' urls.&lt;/p&gt;&#xA;&lt;p&gt;Should look like that:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deb cdrom:[elementary OS 6.1 _odin_ - stable amd64 (20211218)]/ focal contrib main non-free&#xA;deb http://archive.ubuntu.com/ubuntu/ focal main restricted universe multiverse&#xA;deb-src  http://archive.ubuntu.com/ubuntu/ focal main restricted universe multiverse&#xA;deb http://archive.ubuntu.com/ubuntu/ focal-updates main restricted universe multiverse&#xA;deb-src  http://archive.ubuntu.com/ubuntu/ focal-updates main restricted universe multiverse&#xA;deb http://archive.canonical.com/ubuntu focal partner&#xA;deb-src http://archive.canonical.com/ubuntu focal partner&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28465" LastActivityDate="2022-06-18T12:01:12.390" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29856" PostTypeId="1" CreationDate="2022-06-19T05:51:39.590" Score="0" ViewCount="57" Body="&lt;p&gt;Epiphany don't work if you have mixed use locales.&lt;/p&gt;&#xA;&lt;p&gt;How to reproduce an error:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Install Elementary OS 6.1 from latest iso.&lt;/li&gt;&#xA;&lt;li&gt;In System Settings change Formats to a different language and press button &amp;quot;Set Language&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Logout&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;After that Epiphany can't open any site.&lt;/p&gt;&#xA;&lt;p&gt;If you instead use button &amp;quot;Set System Language&amp;quot;, Epiphany works as intended.&lt;/p&gt;&#xA;" OwnerUserId="28470" LastActivityDate="2024-03-12T00:08:56.067" Title="Epiphany don't work if you have mixed user locales" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29858" PostTypeId="1" CreationDate="2022-06-19T17:01:14.767" Score="0" ViewCount="14" Body="&lt;p&gt;Code text editor window does not snap. Every other app snaps. It doesn't matter if I use mouse or keyboard shortcut.&lt;/p&gt;&#xA;" OwnerUserId="28473" LastActivityDate="2024-01-21T17:08:16.167" Title="Code text editor snapping problem" Tags="|code|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29859" PostTypeId="2" ParentId="29856" CreationDate="2022-06-20T19:04:58.750" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://github.com/flatpak/flatpak/issues/3712&quot; rel=&quot;nofollow noreferrer&quot;&gt;This is an old flatpak bug&lt;/a&gt;, fixed in flatpak 1.12.0, which was released in October 2021. You might report a bug to ask the elementary OS developers to update flatpak or backport the fix.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2022-06-20T19:04:58.750" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29860" PostTypeId="2" ParentId="21898" CreationDate="2022-06-22T14:27:26.737" Score="1" Body="&lt;p&gt;What does “fixing” look like here? I know that it's more of a underlying system thing so for the greeter to do its own sorting would require some custom code.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;Originally posted at &lt;a href=&quot;https://jacky.wtf/2022/6/IVlj&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://jacky.wtf/2022/6/IVlj&lt;/a&gt;, manually POSSE'd.&lt;/p&gt;&#xA;" OwnerUserId="12545" LastActivityDate="2022-06-22T14:27:26.737" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29866" PostTypeId="1" CreationDate="2022-06-26T17:32:55.497" Score="0" ViewCount="589" Body="&lt;p&gt;How come I cannot find Gnome Disks for EoS?&#xA;Is there any disk utility with a GUI that I can use on EoS?&#xA;I am having problems with permissions on ext hard drives that were formatted on Mac OSX.&#xA;There is no way of changing the permissions even when logged in as Admin.&lt;/p&gt;&#xA;&lt;p&gt;Any help much appreciated.&lt;/p&gt;&#xA;" OwnerUserId="27216" LastActivityDate="2024-02-22T02:04:55.603" Title="Disk Utility for EoS" Tags="|permissions|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29867" PostTypeId="2" ParentId="29555" CreationDate="2022-06-27T09:13:08.220" Score="0" Body="&lt;p&gt;using the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak list --app&amp;gt;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;check whether it is flatpak app?&lt;/p&gt;&#xA;&lt;p&gt;if yes, use command below to remove:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpak uninstall --delete-data App-ID&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-06-27T09:13:08.220" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29868" PostTypeId="2" ParentId="29846" CreationDate="2022-06-27T09:22:43.570" Score="0" Body="&lt;p&gt;just drag it from Applications to the dock...&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-06-27T09:22:43.570" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29871" PostTypeId="1" CreationDate="2022-06-28T15:24:52.177" Score="1" ViewCount="102" Body="&lt;p&gt;I'm having an issue with Proton.me/Protonmail.com. The certificate needs to be self accepted, but the Mail app won't give me the option to accept it. Geary email allows this. So something in the Elementary implementation has taken this away.&lt;/p&gt;&#xA;&lt;p&gt;To repeat:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Sign up for a &lt;a href=&quot;https://proton.me/&quot; rel=&quot;nofollow noreferrer&quot;&gt;proton.me&lt;/a&gt; account&lt;/li&gt;&#xA;&lt;li&gt;Download the &lt;a href=&quot;https://proton.me/mail/bridge#download&quot; rel=&quot;nofollow noreferrer&quot;&gt;Proton/Protonmail bridge&lt;/a&gt; and sign in&lt;/li&gt;&#xA;&lt;li&gt;Follow the directions for Thunderbird from Proton for setting up Elementary Mail.&lt;/li&gt;&#xA;&lt;li&gt;Notice that at the step where the user has to accept the certificate there is nothing available from the Mail app. It just fails.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If you download Geary and do the same steps you will be allowed to accept the certificate.&lt;/p&gt;&#xA;" OwnerUserId="27590" LastActivityDate="2023-06-17T13:54:08.053" Title="Getting Proton.me/Protonmail.com bridge configured with Mail?" Tags="|pantheon-mail|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29872" PostTypeId="1" CreationDate="2022-06-28T17:37:57.517" Score="-1" ViewCount="77" Body="&lt;p&gt;I've been all over the internet on this.  EO will only mount my usb hard drives as root. So all my files are inaccessible. The disk utility is absolutely useless, no menu, no options, no hope. Am I the only person having this problem?&lt;/p&gt;&#xA;&lt;p&gt;I am not a stupid user, and I've really tried to figure this out.  Am about to give up on EO, Ubuntu, perhaps Debian, and I have used Linux for YEARS without having this horribly disabling problem.&lt;/p&gt;&#xA;&lt;p&gt;No my disks are not corrupted. Please don't respond with esoteric material, this should be an easy thing to do...unless you want to chase users away screaming in distress.Which as I've indicated, I'm about to do. I'm even considering installing Windows&lt;/p&gt;&#xA;&lt;p&gt;elementary OS 6.1 Jólnir&lt;/p&gt;&#xA;" OwnerUserId="28133" LastActivityDate="2022-06-28T19:26:29.050" Title="Why in the World does Elementary OS make it impossible to access a USB hard drive?" Tags="|disk-management|user|bugs|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29873" PostTypeId="1" CreationDate="2022-06-28T18:47:45.570" Score="0" ViewCount="31" Body="&lt;p&gt;Notifications appear without sound, I tried changing theme, turn off/on do-not-disturb, everything else works fine. Only notifications have no sound.&lt;/p&gt;&#xA;" OwnerUserId="28492" LastActivityDate="2024-03-23T00:08:21.013" Title="Notification sound suddenly does not play anymore" Tags="|sound|audio|notifications|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29874" PostTypeId="2" ParentId="29872" CreationDate="2022-06-28T19:26:29.050" Score="1" Body="&lt;p&gt;I am having a similar issue and have found no answer yet.&lt;/p&gt;&#xA;&lt;p&gt;See my two questions;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29831/file-permissions-on-mounted-drives-and-inaccessible-folders&quot;&gt;Permissions  problem&lt;/a&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29866/disk-utility-for-eos&quot;&gt;Disk utility&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I can't even seem to find a disk utility of any kind, can you suggest which one to use? Gnome Disks doesn't seem to exist anymore or at least isn't available for eOS.&lt;/p&gt;&#xA;" OwnerUserId="27216" LastActivityDate="2022-06-28T19:26:29.050" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29875" PostTypeId="1" AcceptedAnswerId="29909" CreationDate="2022-06-29T16:01:31.703" Score="0" ViewCount="137" Body="&lt;p&gt;For some reason EOS is desperately trying (and failing to update)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/47Yg6.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/47Yg6.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I don't think I have and definitely don't use nvidia-470-74&lt;/p&gt;&#xA;&lt;p&gt;It's not a serious problem, but a nuisance.&lt;/p&gt;&#xA;&lt;p&gt;How do I, please, get rid of it? and stop EOS telling me that I should update something that I don't need?&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;EDIT:&lt;/strong&gt; interweb search seems to bring some issues&lt;/p&gt;&#xA;&lt;p&gt;(although no solution...) related to &lt;code&gt;&amp;quot;Flatpak runtime&amp;quot;&lt;/code&gt;  ????&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;another EDIT:&lt;/strong&gt; found what looks like related issue? apparently closed?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/appcenter/issues/1529&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/appcenter/issues/1529&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;one more EDIT&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~$ flatpak update&#xA;        &#xA;Looking for updates…&#xA;        &#xA;Info: org.kde.Platform//5.15 is end-of-life, with reason:&#xA;We strongly recommend moving to the latest stable version of the Plaform and SDK&#xA;        &#xA;                ID                                                    Branch            Op            Remote             Download&#xA;         1. [\] org.freedesktop.Platform.GL.nvidia-470-74             1.4               u             flathub            1.0 kB / 271.3 MB&#xA;         2. [ ] org.kde.Platform.Locale                               5.15              r&#xA;         3. [ ] org.kde.Platform                                      5.15              r&#xA;&#xA;Warning: While downloading https://us.download.nvidia.com/XFree86/Linux-x86_64/470.74/NVIDIA-Linux-x86_64-470.74.run: Could not connect: Socket I/O timed out&#xA;&#xA;Changes complete.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;strong&gt;yet another EDIT...&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;this time tried:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~$ flatpak uninstall org.freedesktop.Platform.GL.nvidia-470-74&#xA;&#xA;&#xA;        ID                                                  Branch           Op&#xA; 1. [-] org.freedesktop.Platform.GL.nvidia-470-74           1.4              r&#xA;&#xA;Uninstall complete.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2022-07-12T14:00:06.260" LastActivityDate="2022-07-12T15:18:21.983" Title="Flatpak runtime OS system components update - not completing" Tags="|updates|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29876" PostTypeId="2" ParentId="29605" CreationDate="2022-06-29T19:14:00.643" Score="0" Body="&lt;p&gt;I heard that the default installation user is &lt;code&gt;elementary&lt;/code&gt;, but that this will not be helpful as the installer doesn't seem to have more than one sudo terminal in the installer.  Also the installer doesn't seem to have a GUI, nor an init script for the xsession.&lt;/p&gt;&#xA;" OwnerUserId="28493" LastActivityDate="2022-06-29T19:14:00.643" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29878" PostTypeId="1" CreationDate="2022-06-29T22:21:08.387" Score="0" ViewCount="82" Body="&lt;p&gt;Is it actually possable to sync a Gmail calendar with the Elementary Calendar app??&lt;/p&gt;&#xA;&lt;p&gt;I have searched hi and low for a solution and &lt;strong&gt;nothing&lt;/strong&gt; works. Some posts online semed to accomplished this with previous versions of Chrome/Elementary. I using Elementary 6.1 and adjusting google settings in Chrome Version 103.0.5060.53.&lt;/p&gt;&#xA;&lt;p&gt;Thanks,&lt;/p&gt;&#xA;&lt;p&gt;Paul&lt;/p&gt;&#xA;" OwnerUserId="26756" LastActivityDate="2024-04-02T08:02:10.203" Title="Syncing GMail Calendar with the Calendar App in 2022" Tags="|calendar|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29880" PostTypeId="2" ParentId="29716" CreationDate="2022-07-01T07:19:00.540" Score="0" Body="&lt;p&gt;Try to install an app from flathub and then reopen appcenter if this does not work I do not know what you can do&lt;/p&gt;&#xA;" OwnerUserId="28044" LastActivityDate="2022-07-01T07:19:00.540" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29881" PostTypeId="2" ParentId="29587" CreationDate="2022-07-01T07:23:13.667" Score="0" Body="&lt;p&gt;Install an application from flathub and then open the appcenter, the flatpak flathub applications should appear.&lt;/p&gt;&#xA;" OwnerUserId="28044" LastActivityDate="2022-07-01T07:23:13.667" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29882" PostTypeId="2" ParentId="29383" CreationDate="2022-07-01T07:28:25.990" Score="0" Body="&lt;p&gt;If it should be possible to publish as long as it fits with the elementary design standards and is packaged in flatpak format.&lt;/p&gt;&#xA;" OwnerUserId="28044" LastActivityDate="2022-07-01T07:28:25.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29883" PostTypeId="2" ParentId="29213" CreationDate="2022-07-01T07:57:58.103" Score="0" Body="&lt;p&gt;Has this been resolved. I have just installed Elementary OS 6.1, installed restricted codecs, video doesn't work in default player. Installed VLC and it works. So what's the problem with the default player?&lt;/p&gt;&#xA;" OwnerUserId="28495" LastActivityDate="2022-07-01T07:57:58.103" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29885" PostTypeId="1" CreationDate="2022-07-01T08:12:27.483" Score="1" ViewCount="273" Body="&lt;p&gt;My password doesn't show when I type anything near &amp;quot;Please unlock disk cryptdata&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="28496" LastActivityDate="2022-07-01T08:12:27.483" Title="When restarting my pc afer installing elementary OS it says &quot;Please unlock disk cryptdata&quot;. Although I know my password I can't type anything there!" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29886" PostTypeId="2" ParentId="29873" CreationDate="2022-07-01T18:13:37.393" Score="0" Body="&lt;p&gt;I already try disabling by activating the notification sounds of the applications in settings&lt;a href=&quot;https://i.stack.imgur.com/TgOTi.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/TgOTi.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28044" LastActivityDate="2022-07-01T18:13:37.393" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29887" PostTypeId="1" CreationDate="2022-07-01T18:42:15.497" Score="0" ViewCount="17" Body="&lt;p&gt;How can I reactivate the Trash Can on the left site of the Files window?&lt;/p&gt;&#xA;" OwnerUserId="28500" LastActivityDate="2024-03-23T21:06:25.720" Title="Trash Quick-Link removed - can get it back" Tags="|pantheon-files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29888" PostTypeId="2" ParentId="29768" CreationDate="2022-07-02T01:44:11.120" Score="0" Body="&lt;p&gt;This is an issue directly with the Wireless Card, I had the same issue and it was happening either Windows or EOS and I had to restart the laptop multiple time to get it work so I came across with some forums post saying that the problem is the card itself and not a driver issue, I would suggest to get a WiFi card replacement and use an Intel instead because those RealTek models kind of suck. I had RT8822CE and the same behavior.&lt;/p&gt;&#xA;" OwnerUserId="19775" LastActivityDate="2022-07-02T01:44:11.120" CommentCount="0" CommunityOwnedDate="2022-07-02T01:44:11.120" ContentLicense="CC BY-SA 4.0" />
  <row Id="29890" PostTypeId="2" ParentId="29887" CreationDate="2022-07-02T17:18:29.797" Score="0" Body="&lt;p&gt;It should not be possible to remove the Trash shortcut since a fix merged in February.  However, even if you have an older version and remove Trash, it should reappear on restarting Files.  The only exception is if you run as Administrator in which case there is no Trash support (anything deleted is deleted permanently).&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-07-02T17:18:29.797" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29892" PostTypeId="1" CreationDate="2022-07-03T21:21:50.553" Score="0" ViewCount="115" Body="&lt;p&gt;Please, help me. I can't install this beautiful OS. |&#xA;My laptop: HP 250 G6 |&#xA;x64 |&#xA;RAM: 2x8 (16GB) |&#xA;CPU: i3-7020U |&#xA;GPU: Intel HD Graphics 620 |&#xA;SSD: 256GB |&#xA;HDD: 150GB |&#xA;Photo of Errors: &lt;a href=&quot;https://i.stack.imgur.com/0kfMo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://i.stack.imgur.com/0kfMo.jpg&lt;/a&gt; |&#xA;*and before I had more problems.&lt;/p&gt;&#xA;" OwnerUserId="28505" LastEditorUserId="28505" LastEditDate="2022-07-03T21:22:38.627" LastActivityDate="2023-12-26T15:09:41.220" Title="Why I can't install Elementary OS on HP laptop?" Tags="|dual-boot|laptop|hp|error|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29893" PostTypeId="2" ParentId="29892" CreationDate="2022-07-03T22:28:55.837" Score="0" Body="&lt;p&gt;Your installer was either corrupted, or your write to install media was flawed.&#xA;Check yout instalation media USB and try again.&#xA;More info:&#xA;&lt;a href=&quot;https://help.ubuntu.com/community/SquashfsErrors&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://help.ubuntu.com/community/SquashfsErrors&lt;/a&gt;&#xA;&lt;a href=&quot;https://askubuntu.com/questions/1236021/why-do-i-see-a-message-squashfs-errorunable-to-read-data-and-page-while-install&quot;&gt;https://askubuntu.com/questions/1236021/why-do-i-see-a-message-squashfs-errorunable-to-read-data-and-page-while-install&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="28506" LastActivityDate="2022-07-03T22:28:55.837" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29894" PostTypeId="2" ParentId="29866" CreationDate="2022-07-03T22:31:30.803" Score="0" Body="&lt;p&gt;The command line utilities are: &lt;code&gt;cfdisk&lt;/code&gt; and &lt;code&gt;gparted&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Also you can install Gparted:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="28506" LastEditorUserId="26" LastEditDate="2022-09-29T21:29:14.923" LastActivityDate="2022-09-29T21:29:14.923" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29895" PostTypeId="2" ParentId="29892" CreationDate="2022-07-04T10:07:42.947" Score="0" Body="&lt;p&gt;I have found the solvation! I formatted the flash drive, after that I mounted the .ISO file, moved all files from .ISO to flash drive and booted through EFI (select the EFI file in ../EFI/boot/bootx64.efi) (Before I did it through basic Boot in USB with written 'elementary OS').&lt;/p&gt;&#xA;" OwnerUserId="28505" LastActivityDate="2022-07-04T10:07:42.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29898" PostTypeId="2" ParentId="28547" CreationDate="2022-07-07T08:51:30.813" Score="1" Body="&lt;p&gt;As said earlier there is no way to achieve this with &lt;code&gt;io.elementary.files&lt;/code&gt; on eOS 6 and 6.1.&lt;/p&gt;&#xA;&lt;p&gt;Single click on folders it's a bad choice. I don't see any good reason for supporting it.&lt;/p&gt;&#xA;&lt;p&gt;You realize how bad it is when you want to select a folder with mouse for deleting it. I'd like to know what eOS developers have to say about it.&lt;/p&gt;&#xA;&lt;p&gt;I think &lt;code&gt;Nautilus&lt;/code&gt; is a much better choice. The integration with eOS is easy.  Despite the single click issue &lt;code&gt;Nautilus&lt;/code&gt; has also a much better &lt;code&gt;search&lt;/code&gt; functionality.&lt;/p&gt;&#xA;&lt;p&gt;Next system won't be eOS. I regret to say it although a followed and supported (financially) the project from the start.&lt;/p&gt;&#xA;" OwnerUserId="2982" LastActivityDate="2022-07-07T08:51:30.813" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29899" PostTypeId="1" CreationDate="2022-07-07T09:58:40.253" Score="0" ViewCount="39" Body="&lt;p&gt;I know that's it's not a new behavior but it's really annoying when I leave my desk 2 minutes to wait for the compute to wake up when I get back...&lt;/p&gt;&#xA;&lt;p&gt;So, when I lock the compute, it goes directly in suspend mode whatever the setting I can set in Energy panel of the System settings...&lt;/p&gt;&#xA;&lt;p&gt;Can I configure Elementary to prevent this behavior?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for any help !&lt;/p&gt;&#xA;" OwnerUserId="19894" LastActivityDate="2024-04-01T20:02:56.933" Title="Jólnir - How to prevent laptop do suspend when locking it" Tags="|suspend|lock|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29901" PostTypeId="5" CreationDate="2022-07-08T06:16:09.530" Score="0" Body="" OwnerUserId="-1" LastEditorUserId="-1" LastEditDate="2022-07-08T06:16:09.530" LastActivityDate="2022-07-08T06:16:09.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29902" PostTypeId="4" CreationDate="2022-07-08T06:16:09.530" Score="0" Body="For questions about connecting musical instruments to elementary OS through the technical standard MIDI (Musical Instrument Digital Interface)" OwnerUserId="8517" LastEditorUserId="8517" LastEditDate="2022-09-21T14:00:21.227" LastActivityDate="2022-09-21T14:00:21.227" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29905" PostTypeId="2" ParentId="29899" CreationDate="2022-07-11T16:10:24.297" Score="0" Body="&lt;p&gt;How do you lock your laptop? The shortcut for lock is super+L. If you do this, your laptop shouldn't go to sleep.&lt;/p&gt;&#xA;&lt;p&gt;Or do you press the power button/close the lid instead? In that case, you can configure the action to lock in the power/energy menu.&lt;/p&gt;&#xA;&lt;p&gt;Note that your changes will take effect only after you restart your laptop. So make sure to do that.&lt;/p&gt;&#xA;" OwnerUserId="28527" LastActivityDate="2022-07-11T16:10:24.297" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29906" PostTypeId="2" ParentId="29878" CreationDate="2022-07-12T03:25:40.190" Score="0" Body="&lt;p&gt;Para el correo y el calendario debes utilizar las contraseñas obtenidas para cada aplicación desde la administración de contraseñas obtenidas de la cuenta de Gmail. Solo copia y pega la contraseña que te dan (es una con 16 letras) en el momento que el correo y el calendario te pida la contraseña de la cuenta que utilices. Esto se debe a los cambios de politicas de google para apps de terceros que dio inició hace unos meses. Saludos.&lt;/p&gt;&#xA;" OwnerUserId="28529" LastEditorUserId="28529" LastEditDate="2022-07-12T03:26:57.603" LastActivityDate="2022-07-12T03:26:57.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29907" PostTypeId="2" ParentId="735" CreationDate="2022-07-12T04:14:30.237" Score="0" Body="&lt;p&gt;If the layout you want isn't included in the list, you can create one and add it following the instructions in this other answer &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/1264/how-to-provide-and-select-a-custom-keyboard-layout-xkb-methods-failing&quot;&gt;How to provide and select a custom keyboard layout (xkb methods failing)&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="13227" LastActivityDate="2022-07-12T04:14:30.237" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29909" PostTypeId="2" ParentId="29875" CreationDate="2022-07-12T15:18:21.983" Score="0" Body="&lt;p&gt;It seems that my last attempt has solved the issue.&lt;/p&gt;&#xA;&lt;p&gt;I am posting just in case it helps anybody else searching for a solution to similar problem:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~$ flatpak uninstall org.freedesktop.Platform.GL.nvidia-470-74&#xA;&#xA;        ID                                                  Branch           Op&#xA; 1. [-] org.freedesktop.Platform.GL.nvidia-470-74           1.4              r&#xA;&#xA;Uninstall complete.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-07-12T15:18:21.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29914" PostTypeId="1" CreationDate="2022-07-18T12:49:07.683" Score="1" ViewCount="683" Body="&lt;p&gt;I find it very difficult to configure my gmail currently in 2022, how do I solve this?  since I don't even have two-step verification activated.  Thank you&lt;/p&gt;&#xA;" OwnerUserId="28486" LastActivityDate="2024-02-22T19:01:15.133" Title="in Elementary OS 6.1 how to configure Gmail?" Tags="|settings|pantheon-mail|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29916" PostTypeId="1" CreationDate="2022-07-19T17:41:14.273" Score="0" ViewCount="153" Body="&lt;p&gt;I just switched to Kitty and I'm loving it, but when I open a terminal in the files app always send me to the default terminal instead of kitty.&lt;/p&gt;&#xA;&lt;p&gt;I have modified the default launch terminal via:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo update-alternatives --config x-terminal-emulator&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec kitty&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;gsettings set org.gnome.desktop.default-applications.terminal exec-arg '' &lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;In the dconf editor can't find any option related to the default terminal.&lt;/p&gt;&#xA;&lt;p&gt;Also can't find kitty in the &amp;quot;open with&amp;quot; list.&lt;/p&gt;&#xA;" OwnerUserId="28553" LastActivityDate="2023-12-13T05:00:40.080" Title="Change default terminal in files (io.elementary.files)" Tags="|pantheon-files|pantheon-terminal|dconf|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29917" PostTypeId="2" ParentId="24684" CreationDate="2022-07-19T17:53:08.920" Score="0" Body="&lt;p&gt;A bit late but in 2022, following the official page &lt;a href=&quot;https://www.spotify.com/us/download/linux/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.spotify.com/us/download/linux/&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;The best way is:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;curl -sS https://download.spotify.com/debian/pubkey_5E3C45D7B312C643.gpg | sudo apt-key add -&#xA;&#xA;echo &amp;quot;deb http://repository.spotify.com stable non-free&amp;quot; | sudo tee /etc/apt/sources.list.d/spotify.list&#xA;&#xA;sudo apt update&#xA;&#xA;sudo apt install spotify-client&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/18JqT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/18JqT.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Works fine!&lt;/p&gt;&#xA;" OwnerUserId="28553" LastActivityDate="2022-07-19T17:53:08.920" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29918" PostTypeId="2" ParentId="29866" CreationDate="2022-07-19T18:08:29.573" Score="0" Body="&lt;p&gt;Gparted is the the best option, you install the tool with&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gparted&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;When you open the tool it appears to unmount all the disks and storage devices connected to the PC, so you won't see or access them while gparted is running, first do the operations, close gparted and then u will see them again.&lt;/p&gt;&#xA;" OwnerUserId="28553" LastActivityDate="2022-07-19T18:08:29.573" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29919" PostTypeId="2" ParentId="29916" CreationDate="2022-07-20T20:08:01.830" Score="0" Body="&lt;p&gt;After following the Jeremy suggestion.&lt;/p&gt;&#xA;&lt;p&gt;Just add this desktop entry to &lt;strong&gt;/usr/share/applications&lt;/strong&gt;. The name should be different from &lt;strong&gt;kitty.desktop&lt;/strong&gt; so this entry will only work for the &amp;quot;open with&amp;quot; menu. I named it kittyt.desktop.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Version=1.0&#xA;Name=kittyT&#xA;Exec=kitty --directory %f&#xA;Categories=System;TerminalEmulator;&#xA;Type=Application&#xA;Icon=kitty&#xA;OnlyShowIn=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Change the name for whatever you want, the important values here are the Exec, that launch the terminal in the actual directory and the OnlyShowIn that hides the icon from applications menu.&lt;/p&gt;&#xA;" OwnerUserId="28553" LastEditorUserId="28553" LastEditDate="2022-07-20T20:09:44.380" LastActivityDate="2022-07-20T20:09:44.380" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29920" PostTypeId="1" CreationDate="2022-07-21T11:47:21.587" Score="0" ViewCount="547" Body="&lt;p&gt;I can't seem to be able to install this or any linux OS. Previously I had two partitions in my disk, one with Linux lite and the other with Ubuntu. After various failed installation attempts of SparkyLinux I switched to other OS without any succes.&lt;/p&gt;&#xA;&lt;p&gt;The error I'm getting now is:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;INFO: Extracting /cdrom/casper/filesystem.squashfs&lt;br&gt;&#xA;DEBUG: &amp;quot;unsquashfs&amp;quot; &amp;quot;-f&amp;quot; &amp;quot;-d&amp;quot; &amp;quot;/tmp/distinst.-9xdeX5hwseMH&amp;quot; &amp;quot;/cdrom/casper/filesystem.squashfs&amp;quot; &lt;br&gt;&#xA;ERROR: extracting error: archive extraction failed with status: exit status: 1 &lt;br&gt;&#xA;ERROR: erroed while installing system: archive extraction failed with status: exit status: 1 &lt;br&gt;&#xA;INFO: Install error: archive extraction failed with status: exit status: 1&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;but I think is different from the ones I've gotten before.&lt;/p&gt;&#xA;&lt;p&gt;I'm using the custom install option, making a partition of 1GB for swap (marked for swap in the installed) and the rest for the root (mounted at &amp;quot;/&amp;quot;). If I need to provide more information, please let me know. Any help is appreciated!&lt;/p&gt;&#xA;" OwnerUserId="28557" LastEditorUserId="28557" LastEditDate="2022-07-21T11:50:12.323" LastActivityDate="2022-08-20T16:02:35.247" Title="Can't install Elementary OS 6.1" Tags="|system-installation|install|live-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="29926" PostTypeId="1" CreationDate="2022-07-24T23:01:41.947" Score="1" ViewCount="32" Body="&lt;p&gt;When trying to boot up my PC today, I was greeted with a wall of text that ended with&lt;/p&gt;&#xA;&lt;p&gt;'''[   0.918392] ---[end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---'''&lt;/p&gt;&#xA;" OwnerUserId="28565" LastActivityDate="2022-12-31T22:07:15.857" Title="Elementary OS Stalling While Booting Up" Tags="|boot|kernel|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29928" PostTypeId="1" AcceptedAnswerId="30041" CreationDate="2022-07-25T17:43:10.893" Score="0" ViewCount="47" Body="&lt;p&gt;I'm a GitHub sponsor so I used to be able to download Pinebook Pro early access builds from:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://builds.elementary.io/downloads&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://builds.elementary.io/downloads&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;But I no longer see them listed.  I have done various searches to see if I could find a reference to why they're gone but I haven't found anything.  Is Elementary still providing these builds and if so, when will they be accessible again?&lt;/p&gt;&#xA;" OwnerUserId="28568" LastActivityDate="2022-12-01T20:27:44.460" Title="The Pinebook Pro early access builds are no longer listed. Will they be available again soon?" Tags="|download|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29931" PostTypeId="1" CreationDate="2022-08-01T09:07:28.613" Score="0" ViewCount="195" Body="&lt;p&gt;cant install Proxmax VE 7.2 on virtualbox&lt;/p&gt;&#xA;&lt;p&gt;i Press &amp;quot;install Proxmax VE 7.2&amp;quot;&#xA;It loads And Turn into Black screen And does Nothing&#xA;How Can i fix it&lt;/p&gt;&#xA;" OwnerUserId="30735" LastActivityDate="2024-03-24T15:07:20.913" Title="Cant install Proxmox VE on Virtualbox" Tags="|virtualbox|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29933" PostTypeId="2" ParentId="22374" CreationDate="2022-08-01T13:37:36.263" Score="0" Body="&lt;p&gt;I wonder if this a symptom of the same underlying issue as this: &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/29932/standard-user-can-inhibit-admin-user-from-suspending-computer&quot;&gt;Standard user can inhibit admin user from suspending computer&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Summary: User A (std user) and User B (admin) both logged in. User A can suspend the computer whenever. User B cannot suspend the computer until User A logs out of their current session.&lt;/p&gt;&#xA;&lt;p&gt;However, I would expect if User A (std) can suspend the computer, then User B (admin) should also be equally able to suspend the computer?&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="23095" LastActivityDate="2022-08-01T13:37:36.263" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29934" PostTypeId="2" ParentId="28146" CreationDate="2022-08-02T05:57:14.593" Score="0" Body="&lt;p&gt;It is better to alter the script, which is a bit dumb:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;check if the distro release is OK in ./install.sh&#xA;(in my case, I had &amp;quot;$distroVersion&amp;quot; == &amp;quot;20&amp;quot; although my distro is 20.3&lt;/li&gt;&#xA;&lt;li&gt;check if your gcc version matches&#xA;(in my case it was)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Note that if the gcc version is very different you'll have execution errors. Only works for &amp;quot;close enough&amp;quot; situations.&lt;/p&gt;&#xA;" OwnerUserId="30739" LastActivityDate="2022-08-02T05:57:14.593" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29935" PostTypeId="1" CreationDate="2022-08-02T14:39:21.823" Score="0" ViewCount="56" Body="&lt;p&gt;Can't enable thumbnails preview on Files manager in Jolnir.&#xA;Already tried editing:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo nano /etc/xdg/tumbler/tumbler.rc&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;any suggestion?&lt;/p&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2022-08-02T14:39:21.823" Title="How to enable thumbnails preview on Files manager in Jolnir" Tags="|pantheon-files|release-jolnir|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29938" PostTypeId="2" ParentId="29926" CreationDate="2022-08-03T18:44:43.030" Score="1" Body="&lt;p&gt;A kernel panic only appears when something is really damaged, in my experience I have seen this due to hardware problems. So I suggest you to check the HDD or SSD, just to discard the possibility. If the disk is healthy then boot with an USB and save your files, then reinstall.&lt;/p&gt;&#xA;" OwnerUserId="28553" LastActivityDate="2022-08-03T18:44:43.030" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29945" PostTypeId="2" ParentId="24043" CreationDate="2022-08-10T09:25:47.047" Score="0" Body="&lt;p&gt;Having the same issue with Elementary OS 6.1 Jólnir.&#xA;Sometimes when I get a lot of notifications in a row from slack, my curent work window freezed one second turning semi blank.&#xA;Sometimes it just shows a black screen with a blinking cursor and I got logged out. Pretty annoying if you have a alot of windows open.&lt;/p&gt;&#xA;" OwnerUserId="3542" LastActivityDate="2022-08-10T09:25:47.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29946" PostTypeId="1" CreationDate="2022-08-11T08:34:22.143" Score="2" ViewCount="463" Body="&lt;p&gt;Google has disabled their &lt;code&gt;less safe apps&lt;/code&gt; option and almost all mail clients need to open &lt;code&gt;oauth2&lt;/code&gt; popup in order to get the key for specific account. So, any help with this?&#xA;I just want to hook up my GMail account to &lt;code&gt;elementary 6.1&lt;/code&gt; and it fails.&lt;/p&gt;&#xA;" OwnerUserId="30761" LastActivityDate="2023-12-17T02:09:11.143" Title="I wonder how to connect gmail in 2022?" Tags="|pantheon-mail|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29947" PostTypeId="1" CreationDate="2022-08-12T08:29:53.237" Score="0" ViewCount="189" Body="&lt;p&gt;Over a year ago I installed Elementary OS on an old Macbook Air from circa 2011.  It worked fine, albeit slowly, for a couple of weeks until I performed a suggested nvidia driver update.&#xA;I read similar stack exchange questions from time to time but none of the suggestions worked.&lt;/p&gt;&#xA;&lt;p&gt;So here’s my first question to the community:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;I am confronted to an infinite log-in loop: the system recognises my password, then goes blank a moment, only to return to the log-in screen.  I consulted &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2730/i-am-unable-to-login-infinite-login-loop&quot;&gt;I am unable to login &amp;quot;infinite login loop&amp;quot;&lt;/a&gt; and&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/2443/cant-login-after-upgrade&quot;&gt;Can&amp;#39;t login after upgrade&lt;/a&gt;&#xA;without being able to solve the problem&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the system’s response to « sudo rm -r $HOME/ .Xauthority » is « rm: cannot remove ‘.Xauthority’: No such file or directory »&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the system’s response to « lspci | grep VGA » is « 02:00.0 VGA compatible controller: NVIDIA Corporation MCP89 [GeForce 320M] (rev a2) »&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;the system’s response to « sudo lshw -c video » is « *-display UNCLAIMED » (followed by a raft of technical hardware description)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Question:  how do I get the system to work again after this failed upgrade?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;&lt;p&gt;PS - I am no IT expert, but an average office package user trying to continue using older computers to avoid waste of our planet’s resources.&lt;/p&gt;&#xA;" OwnerUserId="25176" LastActivityDate="2024-02-20T11:00:35.077" Title="How to reinstall .Xauthority and reclaim display after failed nvidia driver upgrade" Tags="|display|greeter|nvidia|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29955" PostTypeId="1" CreationDate="2022-08-23T09:44:30.187" Score="0" ViewCount="373" Body="&lt;p&gt;This happened after update. I'm running it on ElementaryOS 6.1.&lt;/p&gt;&#xA;&lt;p&gt;Here's the output after I run the command &lt;code&gt;flatpak run com.viber.Viber&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;QIBusPlatformInputContext: invalid portal bus.&#xA;Qt: Session management error: None of the authentication protocols specified are supported&#xA;QApplication: invalid style override 'adwaita' passed, ignoring it.&#xA;Available styles: Windows, Fusion&#xA;sh: line 1: xdg-mime: command not found&#xA;qt.webenginecontext:&#xA;&#xA;GLImplementation: desktop&#xA;Surface Type: OpenGL&#xA;Surface Profile: NoProfile&#xA;Surface Version: 3.1&#xA;Using Default SG Backend: yes&#xA;Using Software Dynamic GL: no&#xA;Using Angle: no&#xA;&#xA;Init Parameters:&#xA;&#xA;    allow-loopback-in-peer-connection&#xA;    application-name ViberPC&#xA;    autoplay-policy no-user-gesture-required&#xA;    browser-subprocess-path /app/extra/viber/libexec/QtWebEngineProcess&#xA;    disable-features DnsOverHttpsUpgrade,ConsolidatedMovementXY,InstalledApp,BackgroundFetch,WebOTP,WebPayments,WebUSB,PictureInPicture,AudioServiceOutOfProcess&#xA;    disable-setuid-sandbox&#xA;    disable-speech-api&#xA;    enable-features NetworkServiceInProcess,TracingServiceInProcess,NetworkServiceInProcess&#xA;    enable-threaded-compositing&#xA;    enable-usermedia-screen-capture&#xA;    in-process-gpu&#xA;    use-gl desktop&#xA;&#xA;QQmlApplicationEngine failed to load component&#xA;qrc:/Resources/QML/MainWindow.qml: module &amp;quot;adwaita&amp;quot; is not installed&#xA;qt.core.qobject.connect: QObject::connect(QWindow, ApplicationEngine): invalid nullptr parameter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also tried to downgrade to older flatpak versions, but there still are some issues, some are different from&lt;/p&gt;&#xA;" OwnerUserId="30788" LastEditorUserId="11700" LastEditDate="2023-11-18T18:40:46.567" LastActivityDate="2023-11-18T18:40:46.567" Title="Viber 18.2.0.2 doesn't launch after update eOS 6.1" Tags="|flatpak|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29958" PostTypeId="1" CreationDate="2022-08-23T21:57:31.847" Score="0" ViewCount="22" Body="&lt;p&gt;Touch screen single figure or double finger gestures on inside specific window affect whole desktop.&lt;/p&gt;&#xA;&lt;p&gt;Still 1 image. Single finger gesture stroke on specific window. I want this to scroll the contents inside the window. 2 fingers would be fine as well. But neither works:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mqBWC.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mqBWC.jpg&quot; alt=&quot;single finger gesture&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Still 2 image and that gesture results in a bird eye view zoom out of all windows. I don't want that, my finger is on a specific window.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/B7Kt3.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/B7Kt3.jpg&quot; alt=&quot;zoom out which I don't want following single finger gesture&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Panasonic FZ-G1 MkIII touchscreen.&lt;/p&gt;&#xA;&lt;p&gt;In System Settings for Mouse &amp;amp; Touch there are only 3 settings and they are all for either 3 or more fingers, not for 2 and none for whole desktop gestures.&lt;/p&gt;&#xA;&lt;p&gt;Video:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://drive.google.com/file/d/12x_tTmKejTaIGSpVS-OS7GvvwheU62bT/view?usp=drivesdk&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://drive.google.com/file/d/12x_tTmKejTaIGSpVS-OS7GvvwheU62bT/view?usp=drivesdk&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="30789" LastActivityDate="2024-03-14T15:07:16.137" Title="Touch screen single figure or double finger gestures on inside specific window affect whole desktop - shouldn't do" Tags="|window-manager|release-jolnir|touchscreen|gesture|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29959" PostTypeId="1" CreationDate="2022-08-24T18:50:09.360" Score="0" ViewCount="67" Body="&lt;p&gt;I used boot-repair, but still the boot is stuck. When i use the recovery mode i cannot enter the password to decrypt the partition because the keyboard don't work. I tried all kernels and I tried 3 Keyboards, different USB Ports and i also changed the BIOS settings to legacy mode and csm and legacy USB mode but still no keyboards works to enter the password. I have a USB Stick with EOS which boots fine and in test mode i can unlock the encrypted partition. Is it possible to repair the corrupt EOS installation from outside. In other words from the terminal in test mode?&lt;/p&gt;&#xA;" OwnerUserId="30793" LastEditorUserId="30793" LastEditDate="2022-08-24T18:54:46.117" LastActivityDate="2024-01-22T04:10:21.310" Title="Cannot boot into EOS, in recovery mode no keyboard" Tags="|boot|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29960" PostTypeId="2" ParentId="3611" CreationDate="2022-08-25T10:07:42.427" Score="0" Body="&lt;p&gt;Tried to use pulse audio, didnt work so i deleted it like the first guy, my headphones, speakers and usb dac/amp (IKKO ITM01s) died, then installed QasMixer and the headphone jack and speakers work, but not my usb dac/amp, everything was fixed when I installed pipewire with this guide and regained control from the sound panel&lt;/p&gt;&#xA;&lt;h1&gt;Add ppa for latest build&lt;/h1&gt;&#xA;&lt;p&gt;sudo add-apt-repository ppa:pipewire-debian/pipewire-upstream&lt;/p&gt;&#xA;&lt;h1&gt;Update&lt;/h1&gt;&#xA;&lt;p&gt;sudo apt update&lt;/p&gt;&#xA;&lt;h1&gt;Install components&lt;/h1&gt;&#xA;&lt;p&gt;sudo apt install gstreamer1.0-pipewire pipewire-media-session libspa-0.2-bluetooth libspa-0.2-jack pipewire pipewire-audio-client-libraries&lt;/p&gt;&#xA;&lt;h1&gt;If you get unmet dependencies, you can run:&lt;/h1&gt;&#xA;&lt;p&gt;sudo apt --fix-broken install&lt;/p&gt;&#xA;&lt;h1&gt;Then re-run&lt;/h1&gt;&#xA;&lt;p&gt;sudo apt install gstreamer1.0-pipewire pipewire-media-session libspa-0.2-bluetooth libspa-0.2-jack pipewire pipewire-audio-client-libraries&lt;/p&gt;&#xA;&lt;h1&gt;Reload new services&lt;/h1&gt;&#xA;&lt;p&gt;systemctl --user daemon-reload&lt;/p&gt;&#xA;&lt;h1&gt;Disable PulseAudio service&lt;/h1&gt;&#xA;&lt;p&gt;systemctl --user --now disable pulseaudio.service pulseaudio.socket&lt;/p&gt;&#xA;&lt;h1&gt;If you update from previous version of PopOS&lt;/h1&gt;&#xA;&lt;p&gt;systemctl --user mask pulseaudio&lt;/p&gt;&#xA;&lt;h1&gt;Enable Pipewire services&lt;/h1&gt;&#xA;&lt;p&gt;systemctl --user --now enable pipewire pipewire-pulse&lt;/p&gt;&#xA;&lt;h1&gt;Enable Pipewire media session&lt;/h1&gt;&#xA;&lt;p&gt;systemctl --user --now enable pipewire-media-session.service&lt;/p&gt;&#xA;" OwnerUserId="30795" LastActivityDate="2022-08-25T10:07:42.427" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29962" PostTypeId="2" ParentId="29959" CreationDate="2022-08-30T02:02:43.213" Score="0" Body="&lt;p&gt;Update: I decrypted the whole partition so that i can boot at least in recovery mode but it still dont finish booting. It stops at the Busybox shell (initramfs) waiting for a command. I am a newbie and the problem started when i was tired and was trying to fix a problem where i could not update a kernel i think because the swap drive where they are stored was full of older kernels and there was no enough diskspace left for the update. The terminal gave me infos i should edit a file, which name i forgot, but something about initram. I was getting a bit impatient while reading some forumthreads about those things, and did some terminal commands trying to delete old kernels as far as i remember and since then i am unable too boot. It would be nice if someone could help me to repair the system. I backed up my files, but the environment and programs and tools i worked with would need a new setup, which would take a lot of time.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4S48f.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4S48f.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="30809" LastActivityDate="2022-08-30T02:02:43.213" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29964" PostTypeId="2" ParentId="25451" CreationDate="2022-08-31T16:03:57.240" Score="0" Body="&lt;p&gt;I wouldn't recommend, but you can partition your hard drive to have 2 partitions:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;NTFS partition for Windows backup&lt;/li&gt;&#xA;&lt;li&gt;exFat for file storage that Windows, Linux, and MacOS can use.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;I recommend having a separate drive for your Windows' partition backup and backup just your linux OS snapshots onto your hard drive in a folder using TimeShift. TimeShift does not backup personal files, like photos, documents, and music. You'll need to find a solution to backup those personal file. My solution is kinda dangerous.&lt;/p&gt;&#xA;" OwnerUserId="30820" LastActivityDate="2022-08-31T16:03:57.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29966" PostTypeId="2" ParentId="28146" CreationDate="2022-09-07T09:19:30.783" Score="1" Body="&lt;p&gt;I did tweaked it to look like it supports 2.34 in the install.sh file but it returned with errors&lt;/p&gt;&#xA;&lt;p&gt;take a look at the picture.&lt;/p&gt;&#xA;&lt;p&gt;first one is from my terminal&#xA;other one is from the cyberghost response team&lt;/p&gt;&#xA;&lt;p&gt;and i'm runnning kali 2022.3 glibc version 2.31&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/bMZyP.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/bMZyP.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/q8cZb.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/q8cZb.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;any Ideas or is it just cyberghost 2022.3 won't work with glibc 2.34 ?&#xA;there should be another way to bypass it. Shouldn't it ?&lt;/p&gt;&#xA;" OwnerUserId="30830" LastEditorUserId="30830" LastEditDate="2022-09-07T09:23:15.727" LastActivityDate="2022-09-07T09:23:15.727" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29967" PostTypeId="1" CreationDate="2022-09-07T15:15:40.720" Score="0" ViewCount="927" Body="&lt;p&gt;I have an nvidia card and I'm not surge how to manage drivers on elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;Is it enough to install the drivers that appear on AppCenter? I installed the 510 drivers before. Should I install the 515 now? Do I need to remove the 510 drivers?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L6K0D.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L6K0D.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="6225" LastActivityDate="2022-09-07T15:15:40.720" Title="How to install nvidia drivers" Tags="|nvidia|nvidia-driver|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29972" PostTypeId="1" AcceptedAnswerId="30091" CreationDate="2022-09-15T20:20:17.020" Score="0" ViewCount="41" Body="&lt;p&gt;My machine is a Gigabyte Brix S with an AMD Ryzen 7-4800U Processor and a pair of LG 60cm displays. Selecting suspend in the drop-down at the r/h end of the Wingpanel instantly puts it to sleep but when I want to resume using it I can find no combination of keys or mouse clicks (Apple wired keyboard and old Targus wired mouse) which wakes it.&lt;/p&gt;&#xA;&lt;p&gt;I have to switch off and back on and log in in the usual way.&lt;/p&gt;&#xA;" OwnerUserId="28123" LastActivityDate="2023-01-25T16:54:43.010" Title="I can suspend the computer but how do I &quot;un-suspend&quot; it?" Tags="|suspend|pantheon|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29973" PostTypeId="2" ParentId="29445" CreationDate="2022-09-15T23:30:14.880" Score="0" Body="&lt;p&gt;Installing haruna player via flatpak works for me.&lt;/p&gt;&#xA;" OwnerUserId="30860" LastActivityDate="2022-09-15T23:30:14.880" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29974" PostTypeId="2" ParentId="29955" CreationDate="2022-09-20T10:05:55.957" Score="1" Body="&lt;p&gt;It seemed there is a bug in QT: &lt;a href=&quot;https://bugreports.qt.io/browse/QTBUG-99889&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugreports.qt.io/browse/QTBUG-99889&lt;/a&gt;.&#xA;To launch, try the command:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;env QT_STYLE_OVERRIDE= flatpak run com.viber.Viber&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="30870" LastActivityDate="2022-09-20T10:05:55.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29975" PostTypeId="1" CreationDate="2022-09-21T09:01:13.507" Score="1" ViewCount="53" Body="&lt;p&gt;After I install elementary os 6.1 on my hp ryzen power laptap my touchpad is not working. Although before installing process when I was trying elementary os the touchpad was working fine. After install and restart my laptop its not working.&lt;/p&gt;&#xA;" OwnerUserId="30872" LastActivityDate="2022-09-21T09:01:13.507" Title="Touchpad not working after Installing elementary os" Tags="|touchpad|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29976" PostTypeId="2" ParentId="14623" CreationDate="2022-09-22T07:21:05.207" Score="0" Body="&lt;p&gt;&lt;strong&gt;For posterity, the answer to the original question is provided below.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;While for the OP, it might be worth pointing out that the error message correlates with a lack of (or of &lt;em&gt;updated&lt;/em&gt;) security certificates on your system when referencing &amp;quot;release files&amp;quot;. The links provided, however, were regarding issues with using &lt;code&gt;apt-get&lt;/code&gt; or &lt;code&gt;apt&lt;/code&gt; when updating that were &lt;em&gt;due to access errors&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;If you feel overcoming this issue was challenging, you'll certainly be frustrated if opting to move over to Arch instead, Just as a heads up, Arch is more of a customizable, minimalistic OS to the point where users are practically creating their own custom  version of it when building/creating/installing, sometimes requiring a deeper understanding of kernels, system/kernel modules, etc. and is not as simple and straightforward as maybe Elementary is for the average user. But, I digress.&lt;/p&gt;&#xA;&lt;h2&gt;Three Methods of Resolving the &amp;quot;Updating from repository can't be done securely&amp;quot;  Issue&lt;/h2&gt;&#xA;&lt;p&gt;For those coming across this and/or have a similar issue, there are a few ways to resolve this:&lt;/p&gt;&#xA;&lt;h3&gt;1. The Straightforward, Easiest, Most Secure, and Probably Recommended Method&lt;/h3&gt;&#xA;&lt;p&gt;&lt;code&gt;apt&lt;/code&gt; sees the repository as being insecure because of it's lack of awareness of the repository's certificates or the certificates or outdated and unusable. Replacing or updating those certificates will prevent this error from displaying.&lt;/p&gt;&#xA;&lt;p&gt;The simplest way to do that is to install &lt;code&gt;ca-certificates&lt;/code&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ca-certificates&#xA;&#xA;# Or, if it is already installed, you may want tot try updating it with&#xA;sudo apt install --only-upgrade ca-certificates&#xA;# Or&#xA;sudo apt install --reinstall ca-certificates&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After updating the certificates on your system, &lt;code&gt;apt&lt;/code&gt; should be able to recognize them as being secure.&lt;/p&gt;&#xA;&lt;p&gt;However, if you can't run &lt;code&gt;apt install&lt;/code&gt; properly because of the error and therefore the package cannot be found for some reason, you can try one of the other 2 methods &lt;em&gt;&lt;strong&gt;temporarily&lt;/strong&gt;&lt;/em&gt; to allow briefly the usage of &lt;code&gt;apt&lt;/code&gt; and then install &lt;code&gt;ca-certificates&lt;/code&gt; as mentioned above, before undoing the changes that were made.&lt;/p&gt;&#xA;&lt;h3&gt;2. The Quick Fix, Less Secure, But Gets You Up-and-Running Method&lt;/h3&gt;&#xA;&lt;p&gt;You can force &lt;code&gt;apt&lt;/code&gt; to overlook the fact that it can't review/confirm the repository certificates by modifying your source.list to include &lt;code&gt;[trusted=yes]&lt;/code&gt; for each repository listed that mention this error.&lt;/p&gt;&#xA;&lt;p&gt;Depending on which list contains the repository, you'll need to open and edit one of the listed files using your preferred text editor. Either:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/apt/sources.list&lt;/code&gt; &lt;em&gt;(most common)&lt;/em&gt; or,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/apt/sources.list.d/elementary.list&lt;/code&gt; &lt;em&gt;(as applies to the OP specifically)&lt;/em&gt; or,&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;/etc/apt/sources.list.d/patches.list&lt;/code&gt; &lt;em&gt;(usually if manually added and the file was named this way)&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;In case of confusion, the latter two options only apply if the entries mentioned below were not appended directly to your &lt;code&gt;sources.list&lt;/code&gt; file. And, as an example For the ones mentioned above in the OP, it will look something like this after modifying the lines containing the repository source URL:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Entry might be found in elementary.list&#xA;deb-src [trusted=yes] http://ppa.launchpad.net/elementary-os/stable/ubuntu xenial main&#xA;&#xA;# Entry might be found in patches.list&#xA;deb-src [trusted=yes] http://ppa.launchpad.net/elementary-os/os-patches/ubuntu  xenial main&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This will allow you to avoid the issue altogether but is essentially telling &lt;code&gt;apt&lt;/code&gt; not to bother checking the certificates and no updates are made to &lt;code&gt;/etc/ssl/certs/ca-certificates.crt&lt;/code&gt; which can pose as a security threat. However, this method is the quickest way to get you up in running if you have issues using method #1.&lt;/p&gt;&#xA;&lt;h3&gt;3. The Power Overwhelming, Not Recommended, For Special Uses Cases Method&lt;/h3&gt;&#xA;&lt;p&gt;This last and final method is the least secure and completely disables &lt;code&gt;apt&lt;/code&gt;'s OCSP verification and is not for the standard use-case of a home user.&lt;/p&gt;&#xA;&lt;p&gt;Modify the configuration for &lt;code&gt;apt&lt;/code&gt; to disable verification:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Using a text editor&#xA;sudo nano /etc/apt/apt.conf.d/99verify-peer.conf&#xA;&#xA;# Change the following line from 'true' to 'false' in the conf file&#xA;# or add the line if it is not there&#xA;Acquire { https::Verify-Peer false }&#xA;&#xA;# this can also be done using a simple `touch` &amp;amp; 'echo' &#xA;touch /etc/apt/apt.conf.d/99verify-peer.conf &amp;amp;&amp;amp; \&#xA;echo &amp;gt;&amp;gt;/etc/apt/apt.conf.d/99verify-peer.conf &amp;quot;Acquire { https::Verify-Peer false }&amp;quot;&#xA;&#xA;# or similarly with a 'cat' piped to 'tee -a' command&#xA;cat &amp;quot;Acquire { https::Verify-Peer false }&amp;quot; | tee -a /etc/apt/apt.conf.d/99verify-peer.conf&#xA;&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This might be applicable to very specific situations such as using a VM behind a proxy that results in certificate verification issues even though they've been updated and otherwise opens the repository list up completely. Noting that, Method #2 can be specified to repositories you recognize the URL for rather than skipping any sort of check at all.&lt;/p&gt;&#xA;&lt;p&gt;This, like Method #2, may be used as a temporary solution to run update and update &lt;code&gt;ca-certificate&lt;/code&gt; with the implied understanding that you've verified all the repositories in your repository list are all trusted sources as running &lt;code&gt;apt update&lt;/code&gt; under this method will allow file updates from every repository that's been added to the system and may result in conflicting packages or displaying incompatible software. &lt;strong&gt;Use with discretion is advised.&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Extra Fixes &amp;amp; Other Considerations&lt;/h3&gt;&#xA;&lt;p&gt;Though the above 3 methods cover most situations, there are some rather rare and unique cases that might be resolved by one of the following, but is either not generally recommended, or generally doesn't apply to most common reasons for the errors appearing but may be worth mentioning in case they might help. Try also:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Ensuring the date and time are set correctly (time mismatch sometimes results in false positives&lt;/li&gt;&#xA;&lt;li&gt;replacing the '&lt;em&gt;https://&lt;/em&gt;' with '&lt;em&gt;http://&lt;/em&gt;' for the specified repository URL listed in your &lt;code&gt;sources.list&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;clearing the cache with &lt;code&gt;sudo apt clean&lt;/code&gt; then running update&lt;/li&gt;&#xA;&lt;li&gt;Check AppCenter for any pending updates and allow them to update first (For non-Elementary OS users, this would apply to Software Update, for example)&lt;/li&gt;&#xA;&lt;li&gt;Check your network connection if running a VM, it may have TLS/SSL connection issues when &lt;a href=&quot;https://askubuntu.com/a/1171944/1063373&quot;&gt;running as a bridged connection&lt;/a&gt; rather than NAT&lt;/li&gt;&#xA;&lt;li&gt;Check file permissions for the certificates file/directories/sub-directories i.e. &lt;code&gt;/etc/ssl&lt;/code&gt;, &lt;code&gt;/etc/ssl/certs&lt;/code&gt;, and &lt;code&gt;/etc/ssl/certs/ca-certificates.crt&lt;/code&gt; ensuring they're set to something like &lt;code&gt;0755&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Technical Resources&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man1/apt-transport-https.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;apt&lt;/a&gt; man page&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man1/apt-transport-http.1.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;apt-transport&lt;/a&gt; man page&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man5/sources.list.5.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;source.list&lt;/a&gt; man page&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man5/apt.conf.5.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;apt.conf&lt;/a&gt; man page&lt;/li&gt;&#xA;&lt;li&gt;&lt;a href=&quot;https://manpages.ubuntu.com/manpages/bionic/man5/apt_auth.conf.5.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;apt_auth.conf&lt;/a&gt; man page&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="27023" LastActivityDate="2022-09-22T07:21:05.207" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29978" PostTypeId="2" ParentId="29914" CreationDate="2022-09-25T09:49:51.083" Score="0" Body="&lt;p&gt;I deleted their mailbox and installed thunderbird mail. Works perfectly.&lt;/p&gt;&#xA;" OwnerUserId="30895" LastActivityDate="2022-09-25T09:49:51.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29979" PostTypeId="2" ParentId="2022" CreationDate="2022-09-26T14:11:13.940" Score="1" Body="&lt;p&gt;I am having a similar problem. Recently, on boot up or restart, my eOS system has been auto logging into one of the user accounts (call it user A) even though it has always been configured not to. After auto logging in user A, I can log in with user B, then log out of user A, then log out of, or restart, from user B and get the greeter showing the users. Logging into user B requires a password, but selecting user A logs in user A without a password. Also renamed &lt;code&gt;/etc/lightdm/lightdm.conf&lt;/code&gt; and ensured &lt;code&gt;io.elementary.greeter.conf &lt;/code&gt;as above, with no affect.&#xA;Any ideas on where to start looking to troubleshoot this issue?&lt;/p&gt;&#xA;&lt;p&gt;Computer: Dell Inspiron 15-7568 laptop&#xA;OS: elementary OS 6.1 Jólni, latest updates&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$: lightdm --show-config&#xA;&#xA;[LightDM]&#xA;A logind-check-graphical=true&#xA;C backup-logs=false&#xA;&#xA;[Seat:*]&#xA;A greeter-session=io.elementary.greeter&#xA;A user-session=pantheon&#xA;B allow-guest=false&#xA;D greeter-wrapper=/usr/lib/lightdm/lightdm-greeter-session&#xA;E guest-wrapper=/usr/lib/lightdm/lightdm-guest-session&#xA;F xserver-command=X -core&#xA;G autologin-user=&#xA;&#xA;Sources:&#xA;A /usr/share/lightdm/lightdm.conf.d/40-io.elementary.greeter.conf&#xA;B /usr/share/lightdm/lightdm.conf.d/50-disable-guest.conf&#xA;C /usr/share/lightdm/lightdm.conf.d/50-disable-log-backup.conf&#xA;D /usr/share/lightdm/lightdm.conf.d/50-greeter-wrapper.conf&#xA;E /usr/share/lightdm/lightdm.conf.d/50-guest-wrapper.conf&#xA;F /usr/share/lightdm/lightdm.conf.d/50-xserver-command.conf&#xA;G /etc/lightdm/lightdm.conf&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="30897" LastEditorUserId="26" LastEditDate="2022-09-29T21:36:35.373" LastActivityDate="2022-09-29T21:36:35.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29980" PostTypeId="2" ParentId="29947" CreationDate="2022-09-28T07:35:46.190" Score="0" Body="&lt;p&gt;I kept getting issues with the 'this looks like spam' flag and have reduced the post to be particular to my solution rather than the exhaustive list of other possible solutions I came across.&lt;/p&gt;&#xA;&lt;h2&gt;To continue with your current attempted solution&lt;/h2&gt;&#xA;&lt;p&gt;If you want to double check the existence of &lt;code&gt;.Xauthority&lt;/code&gt; run &lt;code&gt;ls -la&lt;/code&gt; for the &lt;code&gt;$HOME&lt;/code&gt; directory which includes options to show hidden files and will let you confirm whether or not the &lt;code&gt;.Xauthority&lt;/code&gt; file is there are not.&lt;/p&gt;&#xA;&lt;p&gt;If it does, you Should see it along with &lt;code&gt;.xsession-errors&lt;/code&gt;  (which should exist since you're having trouble getting out of this boot loop) and allow you to try that solution again.&lt;/p&gt;&#xA;&lt;p&gt;It's also possible that the file may have been created under the &lt;code&gt;root&lt;/code&gt; home directory accidentally instead of the user's &lt;code&gt;$HOME&lt;/code&gt; directory, in which case you can check this by:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# login and become root&#xA;&#xA;$ sudo -i&#xA;&#xA;# then as root, check if the .Xauthority file exists&#xA;&#xA;$ ls -la &#xA;&#xA;# and remove, no need for sudo since you're logged in as root in console&#xA;&#xA;$ rm .Xauthority&#xA;&#xA;# if you happen to see another file for xorg.conf.new remove &#xA;# that too, it's automatically generated and when it's in the &#xA;# home folder and is unused unless moved to /etc/X11&#xA;&#xA;$ rm xorg.conf.new&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;h1&gt;Resolve Using Recovery Mode&lt;/h1&gt;&#xA;&lt;p&gt;For below, in case you can't reach a console from normal boot &lt;s&gt;as aforementioned &lt;/s&gt; using keyboard combinations, then boot into recovery mode, enable networking, and then select the option for dropping to root. This is suggested because you're going to need to install software and aside from the obvious, enabling networking will automatically remount your primary disk with read/write permissions as necessary.&lt;/p&gt;&#xA;&lt;h2&gt;Solution 1: Blacklisting the Nouveau Driver&lt;/h2&gt;&#xA;&lt;p&gt;You can first try blacklisting the nouveau drivers and rebooting to see if that might resolve the issue:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ sudo bash -c &amp;quot;echo blacklist nouveau &amp;gt; /etc/modprobe.d/blacklist-nvidia-nouveau.conf&amp;quot;&#xA;$ sudo bash -c &amp;quot;echo options nouveau modeset=0 &amp;gt;&amp;gt; /etc/modprobe.d/blacklist-nvidia-nouveau.conf&amp;quot;&#xA;&#xA;# before restarting, you should update the initramfs by running&#xA;# the following (to purge the system of nouveau loading)&#xA;&#xA;$ sudo update-initramfs -u&#xA;&#xA;# then restart&#xA;&#xA;$ sudo reboot&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Alternatively, the answer provided &lt;a href=&quot;https://askubuntu.com/a/112306/1063373&quot;&gt;here&lt;/a&gt; explains when troubleshooting using nvidia drivers in the case of Ubuntu, that you need to exit the Xserver display before installing the nvidia drivers and after you've stopped &lt;code&gt;lightdm&lt;/code&gt; by switching to a virtual &lt;s&gt;terminal&lt;/s&gt; (The tty console) where instead, after arriving at the console&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# stop lightdm&#xA;&#xA;$ sudo stop lightdm&#xA;&#xA;# edit nvidia configuration file to blacklist nouveau&#xA;&#xA;$ sudo nano /etc/modprobe.d/nvidia-graphics-drivers.conf&#xA;&#xA;# and then add the following entries&#xA;blacklist nouveau&#xA;blacklist lbm-nouveau&#xA;blacklist nvidia-173&#xA;blacklist nvidia-96&#xA;blacklist nvidia-current&#xA;blacklist nvidia-173-updates&#xA;blacklist nvidia-96-updates&#xA;alias nvidia nvidia_current_updates&#xA;alias nouveau off&#xA;alias lbm-nouveau off&#xA;&#xA;# Hit Ctrl or Cmd + X to exit, yes to save, yes to same file name &#xA;# (create it if it doesn't exist but it should already exist &#xA;# after installing nvidia drivers.&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;As one further alternative to blacklisting the nouveau driver and trying to get the two drivers to play nice together, don't do any of the above and simply try changing this in your grub configuration:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# use your preferred text editor&#xA;&#xA;$ sudo nano /etc/default/grub&#xA;&#xA;# Add or modify this line to include&#xA;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;nouveau.modeset=0&amp;quot;&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The above ensures, in one way or another, there's no conflict with your on-board graphics driver or the system's open source nouveau driver.&lt;/p&gt;&#xA;&lt;h2&gt;Solution 2: Get Rid of Nvidia Drivers and revert to system drivers&lt;/h2&gt;&#xA;&lt;p&gt;Using the recovery mode console:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# removes all drivers related to nvidia&#xA;&#xA;$ sudo apt purge nvidia*&#xA;&#xA;&#xA;# however, if you have a need for CUDA or some other drivers,&#xA;# from nvidia, you can target specifically the display driver running&#xA;&#xA;$ dpkg -l | grep nvidia&#xA;&#xA;# then from the list find the nvidia driver that was installed and&#xA;# specifically purge that one, for example&#xA;&#xA;$ sudo apt purge nvidia-driver-384 &#xA;&#xA;# or&#xA;&#xA;$ sudo apt purge nvidia-384&#xA;&#xA;# as an added assurance&#xA;&#xA;$ sudo apt autoremove&#xA;$ sudo apt autoclean&#xA;&#xA;# as a side note, some functions may be needed from the below package&#xA;# on certain systems and may not necessarily seem needed for elementary&#xA;# Install after purging nvidia&#xA;&#xA;$ sudo apt install nvidia-common&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then to ensure the system loads, we will re-install the elementary desktop, a helpful Ubuntu package, remove any xorg configurations that may have been previously set when nvidia drivers were installed and then manually re-add the open source nouveau drive back to be loaded, all before updating initramfs and rebooting&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# You can optionally remove elementary-desktop before installing&#xA;&#xA;$ sudo apt remove elementary-desktop&#xA;&#xA;# otherwise&#xA;&#xA;$ sudo apt install elementary-desktop &#xA;$ sudo ubuntu-drivers autoinstall&#xA;$ sudo rm /etc/X11/xorg.conf&#xA;$ echo 'nouveau' | sudo tee -a /etc/modules&#xA;$ sudo update-initramfs -u&#xA;$ sudo reboot&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="27023" LastActivityDate="2022-09-28T07:35:46.190" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="29981" PostTypeId="1" CreationDate="2022-10-01T21:55:30.430" Score="0" ViewCount="25" Body="&lt;p&gt;I was working with files and for some reason all the icons suddenly became about 2X larger, which caused the line spacing to also go up by 2X and now the display is half blank space and much less pleasant to use. This program seems to have no preferences for anything including icon sizes, so how DO I reset it? Running Hera.&lt;/p&gt;&#xA;" OwnerUserId="19788" LastActivityDate="2022-10-02T09:09:41.243" Title="List View in Files suddenly uses icons twice as large" Tags="|pantheon-files|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29982" PostTypeId="2" ParentId="29981" CreationDate="2022-10-01T22:43:20.957" Score="1" Body="&lt;p&gt;Nevermind: I eventually tried &amp;quot;ctrl-minus&amp;quot; and it did the trick (learn something new every day ...).&lt;/p&gt;&#xA;" OwnerUserId="19788" LastActivityDate="2022-10-01T22:43:20.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29983" PostTypeId="2" ParentId="29981" CreationDate="2022-10-02T09:09:41.243" Score="1" Body="&lt;p&gt;You can also change the icon size using &lt;code&gt;&amp;lt;Control&amp;gt;Scroll&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-10-02T09:09:41.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29984" PostTypeId="2" ParentId="4864" CreationDate="2022-10-07T07:55:45.560" Score="1" Body="&lt;p&gt;An alternate option to Phil's comment is to edit &lt;code&gt;.config/gtk-3.0/bookmarks&lt;/code&gt; and add &lt;code&gt;nfs://IP/share_path&lt;/code&gt; (available nfs shares can be found with &lt;code&gt;showmount -e&lt;/code&gt;).&#xA;Shortcut will then be available as Pantheon files bookmark.&#xA;Tested working on elementary 6.1&lt;/p&gt;&#xA;" OwnerUserId="30917" LastActivityDate="2022-10-07T07:55:45.560" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29989" PostTypeId="1" CreationDate="2022-10-09T19:26:49.330" Score="0" ViewCount="76" Body="&lt;p&gt;Today I install Elementary 6.1.&#xA;And I decided to add some PPA to it to install some apps.&#xA;But after I use the add PPA line to terminal and press enter. Nothing happened and after I press ctrl + c I got and error.&#xA;Theis is the PPA that I want to add:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:philip.scott/pantheon-tweaks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And after I press ctrl + c I get this error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    ^CTraceback (most recent call last):&#xA;  File &amp;quot;/usr/bin/add-apt-repository&amp;quot;, line 137, in &amp;lt;module&amp;gt;&#xA;    shortcut = shortcut_handler(line)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/SoftwareProperties.py&amp;quot;, line 884, in shortcut_handler&#xA;    ret = factory(shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 469, in shortcut_handler&#xA;    return PPAShortcutHandler(shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 426, in __init__&#xA;    info = get_ppa_info(self.shortcut)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 380, in get_ppa_info&#xA;    ret = get_ppa_info_from_lp(user, ppa)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 110, in get_ppa_info_from_lp&#xA;    return get_info_from_lp(lp_url)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 104, in get_info_from_lp&#xA;    return get_info_from_https(lp_url, True)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 96, in get_info_from_https&#xA;    data = func(lp_url=url, accept_json=accept_json, retry_delays=retry_delays)&#xA;  File &amp;quot;/usr/lib/python3/dist-packages/softwareproperties/ppa.py&amp;quot;, line 138, in _get_https_content_py3&#xA;    lp_page = urllib.request.urlopen(request,&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 222, in urlopen&#xA;    return opener.open(url, data, timeout)&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 525, in open&#xA;    response = self._open(req, data)&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 542, in _open&#xA;    result = self._call_chain(self.handle_open, protocol, protocol +&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 502, in _call_chain&#xA;    result = func(*args)&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 1397, in https_open&#xA;    return self.do_open(http.client.HTTPSConnection, req,&#xA;  File &amp;quot;/usr/lib/python3.8/urllib/request.py&amp;quot;, line 1354, in do_open&#xA;    h.request(req.get_method(), req.selector, req.data, headers,&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 1256, in request&#xA;    self._send_request(method, url, body, headers, encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 1302, in _send_request&#xA;    self.endheaders(body, encode_chunked=encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 1251, in endheaders&#xA;    self._send_output(message_body, encode_chunked=encode_chunked)&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 1011, in _send_output&#xA;    self.send(msg)&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 951, in send&#xA;    self.connect()&#xA;  File &amp;quot;/usr/lib/python3.8/http/client.py&amp;quot;, line 1425, in connect&#xA;    self.sock = self._context.wrap_socket(self.sock,&#xA;  File &amp;quot;/usr/lib/python3.8/ssl.py&amp;quot;, line 500, in wrap_socket&#xA;    return self.sslsocket_class._create(&#xA;  File &amp;quot;/usr/lib/python3.8/ssl.py&amp;quot;, line 1040, in _create&#xA;    self.do_handshake()&#xA;  File &amp;quot;/usr/lib/python3.8/ssl.py&amp;quot;, line 1309, in do_handshake&#xA;    self._sslobj.do_handshake()&#xA;KeyboardInterrupt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I installed software-properties-common either but nothing changed.&lt;/p&gt;&#xA;" OwnerUserId="30925" LastActivityDate="2024-03-03T09:07:15.920" Title="Can't add PPA in Elementary 6.1" Tags="|ppa|error|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29990" PostTypeId="2" ParentId="29989" CreationDate="2022-10-10T06:25:47.977" Score="0" Body="&lt;p&gt;I think, and I may be wrong here, that eOS 6.1 comes with Python version 2.7 so maybe try to switch your current python version to the default one.&lt;/p&gt;&#xA;" OwnerUserId="30927" LastActivityDate="2022-10-10T06:25:47.977" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29991" PostTypeId="1" CreationDate="2022-10-10T22:20:27.757" Score="1" ViewCount="387" Body="&lt;p&gt;*For some reason when I tried the same thing as before the fresh install it worked this time.&#xA;I went here:&#xA;&lt;a href=&quot;https://github.com/brektrou/rtl8821CU&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/brektrou/rtl8821CU&lt;/a&gt;&#xA;Followed the exact instructions again&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt;sudo su&#xA;&amp;gt;mkdir -p ~/build&#xA;&amp;gt;cd ~/build&#xA;&amp;gt;git clone https://github.com/brektrou/rtl8821CU.git&#xA;&amp;gt;sudo apt-get install dkms&#xA;&amp;gt;cd ~/build/rtl8821CU&#xA;&amp;gt;make&#xA;&amp;gt;sudo make install&#xA;# verified it had installed the driver this time&#xA;&amp;gt;ls /lib/modules/$(uname -r)/kernel/drivers/net/wireless/realtek/rtl8821cu&#xA;elementary OS 6.1 Jólnir&#xA;5.15.0-50-generic&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Restarted my machine.&#xA;Wifi Networks showed up and everything works now.&lt;/p&gt;&#xA;&lt;p&gt;oh and i had to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;&amp;gt;sudo apt-get install linux-headers-${uname -r}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I have tried to replace the drivers following other posts suggestions and when that didn't work and since I'm only setting it up I just wiped everything and tried a fresh install again. The problem still persisted however.&#xA;I have tried following &lt;a href=&quot;https://www.youtube.com/watch?v=vPfLVsyQU_A&quot; rel=&quot;nofollow noreferrer&quot;&gt;this tutorial&lt;/a&gt; and everything installs fine without issue this time but when I reach iwcongif I get this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/t5qAt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/t5qAt.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Some other info that might be useful(I hope) to anyone that can help&#xA;&lt;a href=&quot;https://i.stack.imgur.com/rZfdh.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/rZfdh.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Crml5.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Crml5.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/oyXWR.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/oyXWR.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="30929" LastEditorUserId="30929" LastEditDate="2022-10-10T23:05:49.867" LastActivityDate="2022-10-10T23:05:49.867" Title="*Solved Can't get realtek rtl8811cu wifi adapter drivers to work with elementary OS 6.1" Tags="|wifi|drivers|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29992" PostTypeId="2" ParentId="9407" CreationDate="2022-10-11T11:32:14.197" Score="0" Body="&lt;p&gt;I would love to work on music in Linux. I will NEVER use Windows again, Mac was fine but OS becomes obsolete.&#xA;Linux would be great if the audio interface and routing were simpler. JACK is an utter nightmare for people switching over. Ardour and Reaper are excellent DAW's, that's not the issue, the issue is trying to get the audio running with no hassle. I want to plug in my interface and hit record. ASIO is the best for audio from my experience. If you can make an app that gets rid of JACK...you'd be a hero! Thanks!!!! Love Elementary so far. I'll never go back.&lt;/p&gt;&#xA;" OwnerUserId="30931" LastActivityDate="2022-10-11T11:32:14.197" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29993" PostTypeId="1" CreationDate="2022-10-14T12:44:32.813" Score="2" ViewCount="70" Body="&lt;p&gt;Good evening,&lt;/p&gt;&#xA;&lt;p&gt;I am relatively inexperienced with Linux and have only used Ubuntu for a random Minecraft server so I apologize in advance if this is a stupid question, but I can't seem to get ElementaryOS to download on my Framework laptop. I've used multiple thumb drives, tried downloading the iso multiple times, and doing anything else but I always get the same issue every time. I boot into the setup screen, it loads stuff up for a bit, and I get a full blackscreen terminal with the following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;elementary OS Next elementary tty1&#xA;&#xA;elementary login: [     62.809801] iwlwifi 000:a6:00.0: Timeout waiting for PVNM load!&#xA;[     62.809863] iwlwifi 000:a6:00.0: Failed to start RT ucode: -110&#xA;[     62.809911] iwlwifi 000:a6:00.0: iwl_trans_send_cmd bad state = 1&#xA;[     63.013819]iwlwifi 000:a6:00.0: firmware didn't ACK the reset - continue anyway&#xA;[     63.026049]iwlwifi 000:a6:00.0: Failed to run INIT ucode: -110&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Nothing I do seems to make it work. I am using Etcher, as the ElementaryOS page recommends, and formatting the thumb drive itself doesn't give any issues. Please help&lt;/p&gt;&#xA;" OwnerUserId="30934" LastActivityDate="2024-03-14T00:03:35.443" Title="Can't install ElementaryOS on Framework" Tags="|software-installation|iso|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29994" PostTypeId="2" ParentId="14740" CreationDate="2022-10-14T23:41:39.043" Score="0" Body="&lt;p&gt;Worked for me (v6.1) on a Lenovo m93p mini-pc.  It didn't boot up right after USB install BUT i rebooted a couple more times and it started up.&lt;/p&gt;&#xA;" OwnerUserId="17151" LastActivityDate="2022-10-14T23:41:39.043" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29995" PostTypeId="1" CreationDate="2022-10-17T00:57:54.187" Score="0" ViewCount="101" Body="&lt;p&gt;I am confused about support for applications packaged for Ubuntu, whether distributed directly by Ununtu or in third-party repositories, in Elementary OS.&lt;/p&gt;&#xA;&lt;p&gt;I have searched for LibreOffice and Firefox (though the latter is available in Ubuntu only as a snap, unless a further repository is added) in the AppCenter and found neither.&lt;/p&gt;&#xA;&lt;p&gt;These applications being quite common and popular, it seems surprising that there is no direct path to installing them in Elementary. All around, it seems the offerings from the AppCenter, though they may be carefully curated, are rather limited.&lt;/p&gt;&#xA;&lt;p&gt;What is the current attitude for Ubuntu packages being installed in a deployment of Elementary OS, and is any path available for installing them outside of the command line?&lt;/p&gt;&#xA;" OwnerUserId="30937" LastActivityDate="2024-03-10T20:02:35.323" Title="Support for Ubuntu applications in Elementary" Tags="|appcenter|ubuntu|package-management|aptitude|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="29996" PostTypeId="2" ParentId="29995" CreationDate="2022-10-17T15:48:05.390" Score="0" Body="&lt;p&gt;Searching for flatpak apps from within AppCenter is enabled after installation of the first flatpak app.&lt;/p&gt;&#xA;&lt;p&gt;As you want to install Firefox, go to it's &lt;a href=&quot;https://flathub.org/apps/details/org.mozilla.firefox&quot; rel=&quot;nofollow noreferrer&quot;&gt;FlatHub&lt;/a&gt; page and click the install button. After that, searching for LibreOffice will give results, straight from within AppCenter.&lt;/p&gt;&#xA;" OwnerUserId="30939" LastActivityDate="2022-10-17T15:48:05.390" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="29998" PostTypeId="1" CreationDate="2022-10-20T08:46:57.323" Score="0" ViewCount="104" Body="&lt;p&gt;I'm using elementary OS 6.1 Jólnir.&lt;br /&gt;&#xA;I'm trying to use chrome-remote-desktop, connecting from my Windows11 to ElementaryOS.&lt;/p&gt;&#xA;&lt;p&gt;I have very similar symptom to this thread:&lt;br /&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/12314/chrome-remote-desktop-not-working-with-elementary-os-0-4-1-loki&quot;&gt;Chrome Remote Desktop not working with elementary OS 0.4.1 Loki&lt;/a&gt;&lt;br /&gt;&#xA;But the solution didn't work for me.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;I installed &lt;code&gt;chrome-remote-desktop service&lt;/code&gt;&lt;br /&gt;&#xA;and created &lt;code&gt;.chrome-remote-desktop-session&lt;/code&gt; in my home directory.&lt;/p&gt;&#xA;&lt;p&gt;/usr/share/xsessions/pantheon.desktop&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Desktop Entry]&#xA;Name=Pantheon&#xA;Comment=This session provides elementary experience&#xA;Exec=gnome-session --builtin --session=pantheon&#xA;TryExec=io.elementary.wingpanel&#xA;Icon=&#xA;DesktopNames=Pantheon&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;~/.chrome-remote-desktop-session&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;exec /etc/X11/Xsession 'gnome-session --builtin --session=pantheon'&#xA;DESKTOP_SESSION=pantheon&#xA;XDG_CURRENT_DESKTOP=Pantheon&#xA;XDG_RUNTIME_DIR=/run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And when I connect to ElementryOS using &lt;code&gt;https://remotedesktop.google.com/access&lt;/code&gt;, this blue screen pops up even after I successfully login to the server.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/DRK6S.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/DRK6S.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;How do I fix this?&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;*EDIT&#xA;I made some progress&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;I gave up using custom configurations and used chrome remote desktop feature called Set up via SSH. No bluescreen problem.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;It still has a problem that I cannot make remote session when a local user is logged in. I want to force the local user to logout like windows remote and other VNCs usually do.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="30943" LastEditorUserId="30943" LastEditDate="2022-10-25T03:13:41.773" LastActivityDate="2024-03-18T08:05:45.807" Title="Pantheon session just shows bluescreen" Tags="|pantheon|vnc|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30000" PostTypeId="2" ParentId="29993" CreationDate="2022-10-20T21:31:12.790" Score="0" Body="&lt;p&gt;You seem to be booting into a tty session (#1) instead of the intended graphical session. You should be able to switch with &lt;kbd&gt;Ctrl&lt;/kbd&gt; + &lt;kbd&gt;Alt&lt;/kbd&gt; + &lt;kbd&gt;7&lt;/kbd&gt; to reach the login screen. Hopefully logging in and updating will fix this problem so it does not happen every time.&lt;/p&gt;&#xA;" OwnerUserId="26" LastActivityDate="2022-10-20T21:31:12.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30003" PostTypeId="2" ParentId="29958" CreationDate="2022-10-21T10:51:23.533" Score="0" Body="&lt;p&gt;I just upgraded and got the &lt;a href=&quot;https://github.com/elementary/gala/issues/1487&quot; rel=&quot;nofollow noreferrer&quot;&gt;same issue&lt;/a&gt;. I worked around the issue by disabling the &lt;code&gt;touchegg&lt;/code&gt; daemon from ever starting.&lt;/p&gt;&#xA;&lt;p&gt;You can create the &lt;code&gt;/etc/systemd/system/touchegg.service.d/override.conf&lt;/code&gt; file as follow, then reboot:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[Service]&#xA;ExecStart=&#xA;Restart=&#xA;&#xA;[Install]&#xA;WantedBy=&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;XDG will still autostart a touchegg client, but without the daemon it won't cause wreakage and let us use out touchscreen properly.&lt;/p&gt;&#xA;" OwnerUserId="30946" LastActivityDate="2022-10-21T10:51:23.533" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30006" PostTypeId="1" AcceptedAnswerId="30008" CreationDate="2022-10-22T13:47:27.213" Score="1" ViewCount="582" Body="&lt;p&gt;How to install MySQL Workbench?&lt;/p&gt;&#xA;&lt;p&gt;I go here: &lt;a href=&quot;https://dev.mysql.com/downloads/workbench/&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://dev.mysql.com/downloads/workbench/&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Then I select and download version for Ubuntu Linux&lt;/p&gt;&#xA;&lt;p&gt;When I try to install there is error: Error: Dependency is not satisfiable: libatkmm-1.6-1v5 (&amp;gt;=2.28.2)&lt;/p&gt;&#xA;&lt;p&gt;Can't find a way to install libatkmm 2.28.2&lt;/p&gt;&#xA;" OwnerUserId="27792" LastActivityDate="2022-10-23T06:10:24.953" Title="How to install MySQL Workbench?" Tags="|applications|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30008" PostTypeId="2" ParentId="30006" CreationDate="2022-10-23T06:10:24.953" Score="0" Body="&lt;p&gt;You need to go to Archives for the download. The current version of MySQL Workbench supports only Ubuntu 22.04 and 22.10, and the current version of eleventyOS is based on Ubuntu 20.04.&#xA;In archives, you need to select the latest version of MySQL Workbench that supports Ubuntu 20.04 - 8.0.29&lt;/p&gt;&#xA;" OwnerUserId="30951" LastActivityDate="2022-10-23T06:10:24.953" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30009" PostTypeId="1" AcceptedAnswerId="30014" CreationDate="2022-10-23T17:49:29.100" Score="0" ViewCount="67" Body="&lt;p&gt;The Ethernet Card of my Apple MacBookPro10,1 is a &amp;quot;NetXtreme BCM57786 Gigabit Ethernet PCIe&amp;quot;. It is not working any more since I have installed elementaryOS 6.1. With elementaryOs 5.1 it had worked seemlessly.&lt;/p&gt;&#xA;&lt;p&gt;I've done a &lt;a href=&quot;https://linux-hardware.org/?probe=6354f13944&quot; rel=&quot;nofollow noreferrer&quot;&gt;hardware probe&lt;/a&gt; and it says: &amp;quot;Driver is not found or not configured. We have not found a driver for the device in any Linux kernel versions up to 5.19 (according to the LKDDb) or known additional packages.&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;So it seems, there has never been a dedicated linux driver for this particular ethernet card, but it has been working with another (default?) driver.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to pick the ethernet driver of elementaryOS 5.1 and install it on 6.1?&lt;/p&gt;&#xA;" OwnerUserId="26474" LastActivityDate="2022-10-27T20:58:40.767" Title="Ethernet NetXtreme BCM57786 not working on elementaryOS 6.1, though had been working on 5.1" Tags="|drivers|ethernet|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30010" PostTypeId="2" ParentId="29998" CreationDate="2022-10-24T19:47:48.557" Score="0" Body="&lt;p&gt;Discalimer: I would add this as a comment but I can't due to lack of reputation.&lt;/p&gt;&#xA;&lt;p&gt;Please check the browser's DevTools (press F12) and check if there is any helpful console output or traffic messages once you connect or disconnect. Add any useful error message to your question, clearly labelling as an edit.&lt;/p&gt;&#xA;" OwnerUserId="26474" LastActivityDate="2022-10-24T19:47:48.557" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30011" PostTypeId="1" CreationDate="2022-10-26T13:01:52.117" Score="0" ViewCount="27" Body="&lt;p&gt;I want to replace my old Macbook Pro from 2012 by a more recent ultrabook and I want to stick with elementaryOS. So I'm not searching the best OS for the hardware, but the other way round. Due to my experiences about missing drivers / unsupported hardware parts:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Can anybody recommend a powerful ultrabook that runs seemlessly with eOS 6.1?&lt;/li&gt;&#xA;&lt;li&gt;... even &amp;quot;out of the box&amp;quot; (with installation defaults) ?&lt;/li&gt;&#xA;&lt;li&gt;Would you say that non-Apple hardware is supported better?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Note: I have found this &lt;a href=&quot;https://ubuntu.com/certified/laptops?q=&amp;amp;limit=20&amp;amp;release=20.04%20LTS&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ubuntu compatibility chart&lt;/a&gt;, which I can set to Ubuntu 20.04 LTS (underlying elementaryOS 6.1) and check for Dell, HP and Lenovo. Do you know any more sources?&lt;/p&gt;&#xA;&lt;p&gt;(I was going to ask this question in the &lt;a href=&quot;https://elementaryforums.com/index.php?register/register&quot; rel=&quot;nofollow noreferrer&quot;&gt;forum&lt;/a&gt;, but the forum told me to ask here first.)&lt;/p&gt;&#xA;" OwnerUserId="26474" LastEditorUserId="26474" LastEditDate="2022-10-26T13:03:55.777" LastActivityDate="2022-10-31T15:20:40.870" Title="Seemless compatibility elementaryOS 6.1 with any ultrabooks" Tags="|drivers|hardware|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30012" PostTypeId="2" ParentId="29239" CreationDate="2022-10-26T13:13:00.723" Score="1" Body="&lt;p&gt;I had problems with JasperLake on Manjaro.&#xA;Look here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://forum.manjaro.org/t/jasper-lake-hd-audio-recognized-but-no-sound-as-usual/117082/9&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forum.manjaro.org/t/jasper-lake-hd-audio-recognized-but-no-sound-as-usual/117082/9&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I used:&lt;/p&gt;&#xA;&lt;p&gt;sudo tee /etc/modprobe.d/dspcfg.conf &amp;lt;&amp;lt;&amp;lt; 'options snd-intel-dspcfg dsp_driver=1'&lt;/p&gt;&#xA;&lt;p&gt;which is suggested in the site and now the audio works!&lt;/p&gt;&#xA;" OwnerUserId="30962" LastActivityDate="2022-10-26T13:13:00.723" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30013" PostTypeId="2" ParentId="30011" CreationDate="2022-10-26T19:29:18.253" Score="1" Body="&lt;p&gt;I just got this &lt;a href=&quot;https://www.asus.com/uk/Laptops/For-Home/Zenbook/Zenbook-14-OLED-UX3402-12th-Gen-Intel&quot; rel=&quot;nofollow noreferrer&quot;&gt;Asus Zenbook 14 Oled&lt;/a&gt; with the Intel processor&lt;/p&gt;&#xA;&lt;p&gt;Installed latest daily build of Elementary 7 - two things don't work as well:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Speakers don't work at all - see &lt;a href=&quot;https://superuser.com/questions/1719920/no-sound-from-internal-speakers-on-laptop-but-headphone-jack-and-hdmi-works?newreg=dc433c45a939461e91fccdbf0862f223&quot;&gt;https://superuser.com/questions/1719920/no-sound-from-internal-speakers-on-laptop-but-headphone-jack-and-hdmi-works?newreg=dc433c45a939461e91fccdbf0862f223&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Battery is 4hrs with &lt;code&gt;5.15.0-52-generic&lt;/code&gt; kernel. People comment that with 5.16 and 5.17 kernel battery usage is considerably better, but yeah&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Else, it's a nice machine; keyboard is nice. Coming from an M1 Mac before.&lt;/p&gt;&#xA;" OwnerUserId="16328" LastEditorUserId="16328" LastEditDate="2022-10-26T19:30:54.603" LastActivityDate="2022-10-26T19:30:54.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30014" PostTypeId="2" ParentId="30009" CreationDate="2022-10-27T20:58:40.767" Score="2" Body="&lt;p&gt;The comment of @Vlad helped me get on the track. As discussed &lt;a href=&quot;https://www.vivaolinux.com.br/topico/Iniciantes-no-Linux/Elementary-Os-nao-conecta-no-Wi-fi&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; in brazilian Portuguese, I had to:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Terminal, type&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt-get install firmware-b43-installer&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;restart&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Note that according to &lt;a href=&quot;https://unix.stackexchange.com/a/671688/414821&quot;&gt;this&lt;/a&gt; answer and Vlad's comment, I first did:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;In Terminal, type&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo apt install linux-firmware linux-modules-$(uname -r)&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;&lt;code&gt;sudo modprobe -v bnx2x&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;restart&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;... but I don't think it is necessary here, as the latter installs the drivers for the model &amp;quot;BCM57810&amp;quot;, not &amp;quot;BCM57786&amp;quot;.&lt;/p&gt;&#xA;" OwnerUserId="26474" LastActivityDate="2022-10-27T20:58:40.767" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30017" PostTypeId="2" ParentId="30011" CreationDate="2022-10-31T15:20:40.870" Score="1" Body="&lt;p&gt;I have been using elementary OS with a Lenovo ThinkPad X1 Carbon for the last 5 years. Before that I was on a MacBook Pro with Mac OS. It pretty much just works. It's my daily driver for personal work. I still use Mac OS at the office due to IT restrictions. I bought  gen 3 X1 carbon refurbished from Lenovo back in the day, installed elementary OS from day 1 and haven't looked back. If you stick to somewhat older hardware (2-3 years old) you should be fine. You can always dual boot for a while to make sure everything works the way you want it. I wiped Windows as soon as I got the machine. No regrets.&lt;/p&gt;&#xA;" OwnerUserId="30977" LastActivityDate="2022-10-31T15:20:40.870" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30018" PostTypeId="2" ParentId="29780" CreationDate="2022-11-01T19:46:46.330" Score="1" Body="&lt;p&gt;You probably already figured this out but you can set a custom shortcut in the settings menu. For the command to run: &lt;code&gt;/usr/bin/io.elementary.shortcut-overlay&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I found the command using &lt;code&gt;lxtask&lt;/code&gt; and opening and closing the shortcut menu repeatedly till I found the process, then did &lt;code&gt;whereis io.elementary.shortcut-overlay&lt;/code&gt; and finding the location in the output.&lt;/p&gt;&#xA;" OwnerUserId="30980" LastActivityDate="2022-11-01T19:46:46.330" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30020" PostTypeId="2" ParentId="29914" CreationDate="2022-11-05T22:46:45.577" Score="0" Body="&lt;p&gt;Here is a step by step guide :&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Go to your google account (user icon upper right of chrome or google.com)&lt;/li&gt;&#xA;&lt;li&gt;Click &amp;quot;Manage Your Google Account&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;In your account settings click on Security tab&lt;/li&gt;&#xA;&lt;li&gt;Scroll down to &amp;quot;Signing in to Google&amp;quot; section&lt;/li&gt;&#xA;&lt;li&gt;Click &amp;quot;App Passwords&amp;quot;&#xA;&lt;br&gt;&lt;em&gt;You will have to login with your google password again, for security&lt;/em&gt;&lt;/li&gt;&#xA;&lt;li&gt;Add a new app specific password for Elementary Mail.&lt;/li&gt;&#xA;&lt;li&gt;Then make sure you copy it to your clipboard&#xA;&lt;br&gt;&lt;em&gt;They will not show it to you again&lt;/em&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;(?) You may also want to save it somewhere in your&#xA;password manager / list.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Use this password when adding your gmail account in Elementary.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="30990" LastEditorUserId="31498" LastEditDate="2023-09-25T17:45:37.433" LastActivityDate="2023-09-25T17:45:37.433" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30021" PostTypeId="2" ParentId="29946" CreationDate="2022-11-06T21:54:29.807" Score="0" Body="&lt;p&gt;There's no any option, rather than to use some different software for your email &amp;amp; calendar, rather than default &amp;quot;Mail&amp;quot; and &amp;quot;Calendar&amp;quot; Elementary apps.&lt;/p&gt;&#xA;&lt;p&gt;Or to wait until &lt;a href=&quot;https://github.com/elementary/portals/issues/19&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/portals/issues/19&lt;/a&gt; is done.&lt;/p&gt;&#xA;&lt;p&gt;See the full thread here - &lt;a href=&quot;https://github.com/elementary/mail/issues/789&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/mail/issues/789&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="30994" LastActivityDate="2022-11-06T21:54:29.807" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30023" PostTypeId="1" CreationDate="2022-11-08T15:35:29.193" Score="1" ViewCount="56" Body="&lt;p&gt;I am trying to install Elementary OS 6.1 on my MSI Raider GE76 (Intel core i9 12XX + Nvidia RTX 3080Ti)&lt;/p&gt;&#xA;&lt;p&gt;I created a bootable flash drive using Etcher.&#xA;Then I changed the boot priority in the BIOS to a flash drive, booted from it and chose &amp;quot;Install or try&amp;quot;, the file check started, and then I see the console and it asks me to log in.&lt;/p&gt;&#xA;&lt;p&gt;Alt+Ctrl+F7 doesn't work, I can't get the UI. And the installation has not started. Please help me. I can provide additional information, just tell me what.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Update:&lt;/strong&gt;&#xA;I tried to do the same with Ubuntu 22.04.1.&#xA;Everything is ok.&#xA;The system has been installed. What am I doing wrong with elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="30998" LastEditorUserId="30998" LastEditDate="2022-11-09T07:44:55.290" LastActivityDate="2022-11-09T07:44:55.290" Title="Installation on MSI Raider GE76" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30024" PostTypeId="1" CreationDate="2022-11-09T11:06:13.283" Score="1" ViewCount="53" Body="&lt;p&gt;Today I tryied booting newest elementary os from usb, I tryied with 2 different usb sticks&#xA;same errors on both about unable to enumerate usb device&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ZThLo.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ZThLo.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XGSw4.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XGSw4.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31001" LastActivityDate="2022-11-17T18:38:27.987" Title="booting from usb on dell g15 fails with errors after filechecks" Tags="|boot|usb|dell|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30026" PostTypeId="1" AcceptedAnswerId="30029" CreationDate="2022-11-10T16:44:13.863" Score="0" ViewCount="68" Body="&lt;p&gt;I am using elementary os 6.1. When my storage became full then most of icons disappeared. Now I have remove some stuff and freed some space but my icons still not showing. Here are some screenshots&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mpRNL.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mpRNL.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kD6Dd.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kD6Dd.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31006" LastEditorUserId="31006" LastEditDate="2022-11-11T16:23:36.467" LastActivityDate="2022-11-12T17:04:36.877" Title="Icons not showing" Tags="|applications|desktop|icons|desktop-environment|storage|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30028" PostTypeId="2" ParentId="29445" CreationDate="2022-11-12T11:16:34.483" Score="1" Body="&lt;p&gt;I had the same issue. Elementary OS Videos couldn't play videos. I tried to debug the reason and launched via terminal:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;flatpack run io.elementary.video&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But there was no error in the terminal.&#xA;I tried installing various recommended codecs:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ubuntu-restricted-extras libavcodec-extra libdvd.pkg&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;These measures couldn't help Videos.&lt;/p&gt;&#xA;&lt;p&gt;So I downloaded Celluloid from AppCenter which weighed about 700MBytes and then removed Celluloid.&#xA;Voila. Videos runs flawlessly now.&#xA;I think the reason is the lack of multimedia codecs.&lt;/p&gt;&#xA;" OwnerUserId="28168" LastActivityDate="2022-11-12T11:16:34.483" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30029" PostTypeId="2" ParentId="30026" CreationDate="2022-11-12T17:04:36.877" Score="1" Body="&lt;p&gt;I have fixed it by copying hicolor directory from /usr/share/icons/ to ~/.local/share/icons/&lt;/p&gt;&#xA;" OwnerUserId="31006" LastActivityDate="2022-11-12T17:04:36.877" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30030" PostTypeId="1" AcceptedAnswerId="30035" CreationDate="2022-11-12T19:30:45.007" Score="1" ViewCount="21" Body="&lt;p&gt;Files application crash every time I want to create a new file.&lt;/p&gt;&#xA;&lt;p&gt;I can create a directory, but while creating file application crash permanently.&lt;/p&gt;&#xA;&lt;p&gt;Tried to change permissions to 777, but no results.&lt;/p&gt;&#xA;&lt;p&gt;Any idea how to fix?&lt;/p&gt;&#xA;&lt;p&gt;Currently I create new files using terminal &amp;quot;touch new-file.txt&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Edit: everything is up to date.&lt;/p&gt;&#xA;" OwnerUserId="27792" LastEditorUserId="27792" LastEditDate="2022-11-12T19:33:17.713" LastActivityDate="2022-11-16T16:59:31.493" Title="Files application crash while creating a new file" Tags="|release-jolnir|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30031" PostTypeId="1" CreationDate="2022-11-13T12:45:41.140" Score="1" ViewCount="16" Body="&lt;p&gt;The icon of &lt;strong&gt;p7zip&lt;/strong&gt; does not appear in the applications,&#xA;but if I type p7 in the search window,&#xA;it says : execute &amp;quot;&lt;strong&gt;p7zip&lt;/strong&gt;&amp;quot;.&#xA;I press it, and nothing happens.&lt;/p&gt;&#xA;&lt;p&gt;I had installed it with&#xA;&lt;strong&gt;sudo apt install p7zip-full p7zip-rar&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;and&#xA;p7zip                                         16.02+dfsg-7build1&lt;br /&gt;&#xA;p7zip-full                                    16.02+dfsg-7build1&lt;br /&gt;&#xA;p7zip-rar                                     16.02-3build1&lt;br /&gt;&#xA;are included in the list of the system's software packages&lt;/p&gt;&#xA;" OwnerUserId="30997" LastActivityDate="2022-11-13T12:45:41.140" Title="p7zip cannot be executed" Tags="|encryption|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30032" PostTypeId="2" ParentId="29532" CreationDate="2022-11-14T23:58:24.140" Score="1" Body="&lt;p&gt;Have you tried to install it manually? If not try downloading the Debian package ProtonVPN and then use dpkg:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;sudo dpkg -i protonvpn-stable-release_1.0.0-1_all.deb&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;If dpkg is complaining about missing dependencies, then use apt-get -f install after running dpkg, that is the best advice I can give you, it did not work for me though, but maybe it will help you?&lt;/p&gt;&#xA;" OwnerUserId="31015" LastEditorUserId="26" LastEditDate="2022-11-17T20:43:20.740" LastActivityDate="2022-11-17T20:43:20.740" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30035" PostTypeId="2" ParentId="30030" CreationDate="2022-11-16T16:59:31.493" Score="2" Body="&lt;p&gt;After today's update of Files application everything is working properly, I can create a new file.&lt;/p&gt;&#xA;" OwnerUserId="27792" LastActivityDate="2022-11-16T16:59:31.493" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30041" PostTypeId="2" ParentId="29928" CreationDate="2022-12-01T20:27:44.460" Score="0" Body="&lt;p&gt;I just checked and the Pinebook Pro early access builds are back.  Yea!&lt;/p&gt;&#xA;" OwnerUserId="28568" LastActivityDate="2022-12-01T20:27:44.460" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30042" PostTypeId="1" CreationDate="2022-12-04T10:06:25.217" Score="0" ViewCount="20" Body="&lt;p&gt;I wonder why there is no wallpaper available with the&#xA;&lt;strong&gt;elementary os logo&lt;/strong&gt;&lt;/p&gt;&#xA;" OwnerUserId="30997" LastActivityDate="2023-12-17T06:08:16.053" Title="Is there a desktop wallpaper with the elementary os logo?" Tags="|wallpaper|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30044" PostTypeId="1" CreationDate="2022-12-05T12:16:45.723" Score="0" ViewCount="100" Body="&lt;p&gt;I have installed elementary OS 6.1 Jólnir with Linux 5.15.0-56-generic kernel.&#xA;Yesterday my network company switched me from a 10mbps to a 100mbps optical fiber connection witch a new modem.&#xA;I have installed a Qualcomm Atheros AR8151 Gigabit ethernet controller on my old AsRock H61M/U3S3.&#xA;If I connect directly to modem, wired connection does not works.&#xA;I have to use a ethernet switch with a very slow connection (my brother with an Ubuntu 22.04 goes around 300mbps; I am stuck at 10mbps).&#xA;Before buying a new ethernet card and a new switch, Is there somebody that had same issues and can help me?&#xA;Thanks, Rino.&lt;/p&gt;&#xA;" OwnerUserId="14089" LastActivityDate="2022-12-16T19:31:40.937" Title="slow wired network" Tags="|networking|internet|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="30045" PostTypeId="2" ParentId="8131" CreationDate="2022-12-07T04:06:24.397" Score="0" Body="&lt;p&gt;I a sure that is a fine script, but you can also rebind yourself under keyboard settings (layouts) in latest ubuntu mint.&lt;/p&gt;&#xA;" OwnerUserId="31075" LastActivityDate="2022-12-07T04:06:24.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30046" PostTypeId="1" CreationDate="2022-12-07T09:11:24.670" Score="0" ViewCount="23" Body="&lt;p&gt;I run a program that prints thousands of pages that I need as colour PDF files. I'm using PDF995 as the default printer to create the PDFs. I've checked that PDF995's printing preferences stipulate colour printing, but each PDF is saved in black and white &lt;em&gt;unless&lt;/em&gt; I adjust it before printing a single file. I've modified pdf995.ini successfully before. &lt;strong&gt;Which line of code would I use to force colour printing?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Attempts / research: I've experimented and scoured the internet for answers, both unsuccessfully.&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your help&lt;/p&gt;&#xA;" OwnerUserId="31076" LastActivityDate="2024-01-17T08:02:35.427" Title="Can I edit PDF995's pdf995.ini file to enforce colour printing?" Tags="|printer|default|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30047" PostTypeId="1" CreationDate="2022-12-08T18:29:03.203" Score="0" ViewCount="25" Body="&lt;p&gt;I'm trying to find when I installed elementary Os on my laptop&#xA;I've tried:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;stat / | grep &amp;quot;Birth&amp;quot; | sed 's/Birth: //g' | cut -b 2-11&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;but only a - appears&#xA;no mistake messages, just the -&lt;/p&gt;&#xA;" OwnerUserId="30997" LastActivityDate="2024-01-17T04:04:50.533" Title="Why don't Stat Commands work on elementary OS?" Tags="|pantheon-terminal|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30049" PostTypeId="2" ParentId="29816" CreationDate="2022-12-14T20:31:14.973" Score="0" Body="&lt;p&gt;Long term update...&lt;/p&gt;&#xA;&lt;p&gt;have been using OpenOffice 4.1.13 for a while and it was kind off OK, but spreadsheet started slowing down totally when I tried sorting and filtering large data file,&lt;/p&gt;&#xA;&lt;p&gt;so... tried going back to Libre Office - unfortunately it started freezing Elementary when using spreadsheet (as previously).&lt;/p&gt;&#xA;&lt;p&gt;In the OnlyOffice solved the problem - it not only easily copes when sorting and filtering large spreadsheet data file, but also doesn't cause any problems with Elementary.&lt;/p&gt;&#xA;&lt;p&gt;I recommend OnlyOffice !!! (based on my experience - YMMV)&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2022-12-14T20:31:14.973" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30053" PostTypeId="1" CreationDate="2022-12-18T01:45:37.183" Score="0" ViewCount="45" Body="&lt;p&gt;Where to create my swap partition on the HDD or on the SSD?&lt;/p&gt;&#xA;&lt;p&gt;Hello my people, I hope you are very well, I really like this linux distribution, I tell you my case, I have 2 storage units, I have a HDD and a SSD, my question is how I can use the 2 in the best way?, I currently have the partition / root, Boot on the SSD and the swap partition and home on the HDD, the system starts fast, but when I have several tabs open, freezes and gives errror in the file system, I think it is for having the swap on the hard disk, which is not in its best condition and I was also asking in a facebook community and there was a command that I would like to understand, I attach a picture of the command and what it throws, as I understood the higher the number it gives, the more swap is used in a range of 0 to 100, and to me it gives me as a result 60, which I understand that it uses quite a lot the swap.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/LTDPy.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/LTDPy.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31121" LastActivityDate="2024-01-17T00:04:35.520" Title="Where to create my swap partition on the HDD or on the SSD?" Tags="|ssd|hdd|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30056" PostTypeId="2" ParentId="30053" CreationDate="2022-12-22T22:19:31.243" Score="0" Body="&lt;p&gt;It's generally a good idea to have your swap partition on your slower storage device, which in your case, is the HDD. This is because the swap partition is used as virtual memory and only accessed when your system runs low on physical memory (RAM). Since the HDD is slower than the SSD, using the swap partition on the HDD will not significantly impact system performance but will help extend your SSD's life.&lt;/p&gt;&#xA;&lt;p&gt;Remember that the swap partition is not a replacement for physical RAM, and it's generally best to have enough RAM to handle the workload you place on your system. If you consistently see a high percentage of swap usage, it may be worth considering upgrading your physical RAM to help improve performance.&lt;/p&gt;&#xA;&lt;p&gt;The &lt;code&gt;/proc/sys/vm/swappiness&lt;/code&gt; file is a system parameter in the Linux kernel that controls the relative balance between swapping out runtime memory to disk and reclaiming memory from inactive pages. It is a value between 0 and 100 that determines the likelihood that the kernel will swap out pages of memory to disk. A higher value means that the kernel is more likely to swap pages, while a lower value means that the kernel is less likely to swap pages. The default value is usually 60 in Linux.&lt;/p&gt;&#xA;&lt;p&gt;This file is not a regular file, but rather a virtual file that is provided by the kernel and exists only in the virtual file system (/proc). It can be read and modified like any other file, but the changes only take effect in the current running kernel and are not persisted across reboots.&lt;/p&gt;&#xA;&lt;p&gt;You can use the sysctl command to view or modify the value of the vm.swappiness parameter, for example:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# View the current value&#xA;cat /proc/sys/vm/swappiness&#xA;&#xA;# Set the value to 10&#xA;sysctl vm.swappiness=10&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="12167" LastActivityDate="2022-12-22T22:19:31.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30057" PostTypeId="2" ParentId="30047" CreationDate="2022-12-22T22:34:00.387" Score="0" Body="&lt;p&gt;How about you try &lt;code&gt;stat --printf=&amp;quot;%w&amp;quot; / | cut -b 1-10&lt;/code&gt; ?&lt;/p&gt;&#xA;&lt;p&gt;I'm thinking it might be a case where the birth time field is not always available and may not be displayed for all files. In this case, the stat command will output a dash (-) instead of the birth time.&lt;/p&gt;&#xA;" OwnerUserId="12167" LastActivityDate="2022-12-22T22:34:00.387" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30058" PostTypeId="2" ParentId="30046" CreationDate="2022-12-22T22:44:26.900" Score="0" Body="&lt;p&gt;Did you check the &amp;quot;Always print in color&amp;quot; option? It is on the &amp;quot;Advanced&amp;quot; tab, under the &amp;quot;Color Options&amp;quot; section.&lt;/p&gt;&#xA;&lt;p&gt;The pdf995.ini file is used to configure the behavior of the PDF995 printer driver, but it does not have any options specifically related to color printing.&lt;/p&gt;&#xA;" OwnerUserId="12167" LastActivityDate="2022-12-22T22:44:26.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30059" PostTypeId="2" ParentId="14351" CreationDate="2022-12-24T06:37:23.217" Score="0" Body="&lt;p&gt;I unfortunately continue to get this after the 'make install' step.  Any ideas?&lt;/p&gt;&#xA;&lt;p&gt;Tonys-MacBook-Air:/usr/src/facetimehd-0.1# sudo make install&lt;/p&gt;&#xA;&lt;p&gt;make -C /lib/modules/5.15.0-56-generic/build M=/usr/src/facetimehd-0.1 modules_install&#xA;make[1]: Entering directory '/usr/src/linux-headers-5.15.0-56-generic'&#xA;arch/x86/Makefile:142: CONFIG_X86_X32 enabled but no binutils support&#xA;INSTALL /lib/modules/5.15.0-56-generic/extra/facetimehd.ko&#xA;SIGN    /lib/modules/5.15.0-56-generic/extra/facetimehd.ko&#xA;At main.c:160:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;SSL error:02001002:system library:fopen:No such file or directory: ../crypto/bio/bss_file.c:69&lt;/li&gt;&#xA;&lt;li&gt;SSL error:2006D080:BIO routines:BIO_new_file:no such file: ../crypto/bio/bss_file.c:76&#xA;sign-file: certs/signing_key.pem: No such file or directory&#xA;DEPMOD  /lib/modules/5.15.0-56-generic&#xA;Warning: modules_install: missing 'System.map' file. Skipping depmod.&#xA;make[1]: Leaving directory '/usr/src/linux-headers-5.15.0-56-generic'&#xA;root@Tonys-MacBook-Air:/usr/src/facetimehd-0.1# printf &amp;quot;done\n\n&amp;quot;;&#xA;done&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="31132" LastActivityDate="2022-12-24T06:37:23.217" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30061" PostTypeId="2" ParentId="9681" CreationDate="2022-12-27T00:00:31.020" Score="0" Body="&lt;p&gt;The &lt;em&gt;reason&lt;/em&gt; AppCenter is auto-starting when you log in is &lt;code&gt;/etc/xdg/autostart/io.elementary.appcenter-daemon.desktop&lt;/code&gt;. I guess you could theoretically remove this (as root), except it'd probably be replaced after an update and you'd be back to where you started.&lt;/p&gt;&#xA;&lt;p&gt;If you remove AppCenter entirely, which is probably inadvisable, you may want to look into the &lt;a href=&quot;https://wiki.debian.org/UnattendedUpgrades&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;unattended-upgrades&lt;/code&gt; package&lt;/a&gt; as an alternative.&lt;/p&gt;&#xA;&lt;p&gt;That package adds configuration files to &lt;code&gt;/etc/apt/apt.conf.d/&lt;/code&gt; which, in principle, apply important security updates automatically and without user intervention… which, in principle, I would prefer to AppCenter incessantly nagging me about them. &lt;em&gt;Most&lt;/em&gt; updates are unnecessary if your software is already working the way you like it, but &lt;em&gt;security&lt;/em&gt; updates are an exception. My attitude is sure, operating system, do your security stuff without asking me, just don't update any apps that change the whole user interface or whatever.&lt;/p&gt;&#xA;&lt;p&gt;Lastly, keep in mind that AppCenter's update features are basically a graphical interface on top of &lt;code&gt;sudo apt update &amp;amp;&amp;amp; sudo apt dist-upgrade&lt;/code&gt; followed by &lt;code&gt;flatpak update&lt;/code&gt;. Just running those commands in a terminal is sometimes a better experience than waiting for AppCenter to struggle through a bunch of updates, especially if your wifi is spotty.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastActivityDate="2022-12-27T00:00:31.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30062" PostTypeId="2" ParentId="22172" CreationDate="2022-12-27T12:27:10.900" Score="0" Body="&lt;p&gt;There is now a regex search functionality in Code.  This works for both local seaches (use the toggle button marked &amp;quot;&amp;lt;/&amp;gt;&amp;quot;) global searches (use the switch in the dialog).  Unfortunately you need to know something about regex expressions but this information is easily available online.  With the correct regex you can search for virtually any pattern of text and also e.g. limit the search to the beginning or end of a line.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-12-27T12:27:10.900" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30063" PostTypeId="2" ParentId="16711" CreationDate="2022-12-27T12:50:24.257" Score="0" Body="&lt;p&gt;This is now possible. Access global search with &lt;code&gt;&amp;lt;Shift&amp;gt;&amp;lt;Control&amp;gt;F&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-12-27T12:50:24.257" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30064" PostTypeId="2" ParentId="29858" CreationDate="2022-12-27T12:54:36.183" Score="0" Body="&lt;p&gt;Code now snaps OK (at least in elementary Horus). I think it was due to the minimum window width being greater than half the screen width. If you are still having trouble try reducing the sidebar width or closing it altogether with &lt;code&gt;&amp;lt;Control&amp;gt;\&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-12-27T12:54:36.183" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30065" PostTypeId="2" ParentId="28547" CreationDate="2022-12-27T12:57:26.617" Score="1" Body="&lt;p&gt;Double click to open folders has now been restored to Files, although mixed mode is still default.  You can turn on double click to select through the background context menu.&lt;/p&gt;&#xA;" OwnerUserId="3911" LastActivityDate="2022-12-27T12:57:26.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30067" PostTypeId="2" ParentId="12082" CreationDate="2022-12-27T18:14:28.070" Score="0" Body="&lt;p&gt;i've experienced similar issues when mine was updating and i locked, shut down, suspended or logged out of the os. if yours was updating and it shows that and won't boot up again, you will probably have to reinstall the os, at least thats what i had to do. sorry if you lost data, i hope they fix it soon.&#xA;btw if you did have important data that was only on that install of the os, id wait to reinstall it because someone might have a better fix that doesnt involve reinstalling the whole thing and losing all of your data.&lt;/p&gt;&#xA;" OwnerUserId="31143" LastActivityDate="2022-12-27T18:14:28.070" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30068" PostTypeId="2" ParentId="14772" CreationDate="2022-12-28T19:52:13.753" Score="0" Body="&lt;p&gt;TL;DR: Move the &lt;code&gt;autostart&lt;/code&gt; file aside using &lt;a href=&quot;https://www.debian.org/doc/debian-policy/ap-pkg-diversions.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;dpkg-divert&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ dpkg-divert --divert &amp;quot;/etc/xdg/autostart/io.elementary.appcenter-daemon.desktop.~ram~&amp;quot; --rename &amp;quot;/etc/xdg/autostart/io.elementary.appcenter-daemon.desktop&amp;quot; &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/a/14775/31147&quot;&gt;The answer from @pretz&lt;/a&gt; is correct in that moving &lt;code&gt;/etc/xdg/autostart/io.elementary.appcenter-daemon.desktop&lt;/code&gt; aside is the way to keep this daemon from starting up.  That file is managed, however, by the &lt;code&gt;pop-shop&lt;/code&gt; OS package which means that the &amp;quot;right&amp;quot; way to move it aside is to tell the OS to do so and &lt;code&gt;$ dpkg-divert&lt;/code&gt; is the way to do that in Debian OS'es.  Otherwise the file may be restored when the package is upgraded in the future.&lt;/p&gt;&#xA;" OwnerUserId="31147" LastActivityDate="2022-12-28T19:52:13.753" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30070" PostTypeId="1" AcceptedAnswerId="30072" CreationDate="2023-01-03T10:47:01.907" Score="0" ViewCount="44" Body="&lt;p&gt;Yesterday I installed the &lt;code&gt;nvidia-driver-525&lt;/code&gt; for my laptop with a GTX 1660ti and an AMD CPU with integrated graphics.&lt;/p&gt;&#xA;&lt;p&gt;Everything worked fine (meaning I could see output on both screens), until I booted my laptop today. My external display works (supposedly the output of the nvidia gpu), but my internal laptop display displays a single underscore. I can switch to TTY1 and the TTY shows up on the internal display.&lt;/p&gt;&#xA;&lt;p&gt;When I go to display settings, I can only see the external display. The internal display doesn't show up there.&lt;/p&gt;&#xA;&lt;p&gt;If I unplug my external screen, nothing shows up on the internal screen and the only thing I see is the single underscore at the left of the screen.&lt;/p&gt;&#xA;&lt;p&gt;I tried restarting lightdm, without any success.&lt;/p&gt;&#xA;&lt;p&gt;I don't know what causes this and I hope someone can help. Thanks!&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;lspci | grep 'VGA'&lt;/code&gt; output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;01:00.0 VGA compatible controller: NVIDIA Corporation Device 1f95 (rev a1)&#xA;05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Renoir (rev c7)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;code&gt;xrandr&lt;/code&gt; output:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767&#xA;HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 296mm&#xA;   1920x1080     60.00 +  74.97*   59.94    50.00  &#xA;   1680x1050     59.95  &#xA;   1600x900      60.00  &#xA;   1440x900      59.89  &#xA;   1280x1024     75.02    60.02  &#xA;   1280x800      59.81  &#xA;   1280x720      60.00    59.94    50.00  &#xA;   1152x864      75.00  &#xA;   1024x768      75.03    70.07    60.00  &#xA;   800x600       75.00    72.19    60.32    56.25  &#xA;   720x576       50.00  &#xA;   720x480       59.94  &#xA;   640x480       75.00    72.81    59.94  &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="31156" LastActivityDate="2023-01-05T10:22:51.780" Title="Blinking cursor on internal laptop screen, external screen works normal on eOS6" Tags="|display|graphic-drivers|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30071" PostTypeId="2" ParentId="29425" CreationDate="2023-01-03T17:29:44.780" Score="0" Body="&lt;p&gt;Try to solve this by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt dist-upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If this doesn't help, I usually resolve by using &lt;code&gt;aptitude&lt;/code&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo aptitude upgrade&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Aptitude is usually smart enough to find proper way out.&lt;/p&gt;&#xA;" OwnerUserId="30827" LastActivityDate="2023-01-03T17:29:44.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30072" PostTypeId="2" ParentId="30070" CreationDate="2023-01-03T18:30:02.537" Score="0" Body="&lt;p&gt;I fixed the issue after finding this forum post: &lt;a href=&quot;https://forums.linuxmint.com/viewtopic.php?t=360830&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://forums.linuxmint.com/viewtopic.php?t=360830&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Apparently enabling Nvidia Performance mode in nvidia-settings disables the internal graphics, which explains why the internal laptop display stopped working.&lt;/p&gt;&#xA;&lt;p&gt;After using &lt;code&gt;sudo rm /etc/X11/xorg.conf&lt;/code&gt; the issue was resolved!&lt;/p&gt;&#xA;" OwnerUserId="31156" LastActivityDate="2023-01-03T18:30:02.537" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30073" PostTypeId="2" ParentId="29427" CreationDate="2023-01-03T19:44:29.267" Score="0" Body="&lt;p&gt;Have you found a solution? I'm faced with a similar situation and the only workaround I have is to create a new user account ‍♂️&lt;/p&gt;&#xA;" OwnerUserId="24191" LastActivityDate="2023-01-03T19:44:29.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30075" PostTypeId="1" CreationDate="2023-01-05T21:13:40.990" Score="0" ViewCount="19" Body="&lt;p&gt;Fairly newby to EOS. I've done some spelunking around and the answers to this question are so old they no longer work.&lt;/p&gt;&#xA;&lt;p&gt;I'm on Jolnir, so here goes:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/SuY6y.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/SuY6y.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I've got a separate hard drive with files that I share with a Windows boot. How do I point the various folders in Home to that drive?&lt;/p&gt;&#xA;&lt;p&gt;thanks,&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2024-02-23T22:04:35.560" Title="How to redirect folders in Home" Tags="|files|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30078" PostTypeId="1" CreationDate="2023-01-07T20:11:14.643" Score="0" ViewCount="1372" Body="&lt;p&gt;I'm new to elementary OS (but not to Linux/Ubuntu) and installed it for the first time today. Looks very nice but I have the first strange issue. After installing eOS the Web Browser (Epiphany) worked fine. After updating the system through AppCenter I got an endlessly spinning page loading icon. Firefox works fine though. I found &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/21889/after-update-epiphany-stopped-working&quot;&gt;this&lt;/a&gt; but it's related to NVIDIA and quite old. I have an Intel GPU.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;user@HPSpectre13X360:~$ neofetch&#xA;         eeeeeeeeeeeeeeeee            family@HPSpectre13X360 &#xA;      eeeeeeeeeeeeeeeeeeeeeee         ---------------------- &#xA;    eeeee  eeeeeeeeeeee   eeeee       OS: elementary OS 6.1 Jólnir x86_64 &#xA;  eeee   eeeee       eee     eeee     Host: HP Spectre 13 X360 Convertible &#xA; eeee   eeee          eee     eeee    Kernel: 5.15.0-57-generic &#xA;eee    eee            eee       eee   Uptime: 14 mins &#xA;eee   eee            eee        eee   Packages: 1572 (dpkg), 12 (flatpak) &#xA;ee    eee           eeee       eeee   Shell: bash 5.0.17 &#xA;ee    eee         eeeee      eeeeee   Resolution: 2560x1440 &#xA;ee    eee       eeeee      eeeee ee   DE: Pantheon &#xA;eee   eeee   eeeeee      eeeee  eee   WM: Mutter(Gala) &#xA;eee    eeeeeeeeee     eeeeee    eee   Theme: io.elementary.stylesheet.blueberry [GTK3] &#xA; eeeeeeeeeeeeeeeeeeeeeeee    eeeee    Icons: elementary [GTK3] &#xA;  eeeeeeee eeeeeeeeeeee      eeee     Terminal: io.elementary.t &#xA;    eeeee                 eeeee       CPU: Intel i7-5500U (4) @ 3.000GHz &#xA;      eeeeeee         eeeeeee         GPU: Intel HD Graphics 5500 &#xA;         eeeeeeeeeeeeeeeee            Memory: 1008MiB / 7857MiB &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;dmesg shows this error all over&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[ 1832.905697] traps: eadedCompositor[42368] trap int3 ip:7fe3038caf27 sp:7fe28fffddd0 error:0 in libglib-2.0.so.0.7400.1[7fe303887000+95000]&#xA;                                          &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Any help is appreciated!&lt;/p&gt;&#xA;&lt;p&gt;Update:&#xA;As per the answer below I installed coredumpctl. Now I get this&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;family@HPSpectre13X360:~$ cat /proc/sys/kernel/core_pattern &#xA;|/lib/systemd/systemd-coredump %P %u %g %s %t 9223372036854775808 %h&#xA;family@HPSpectre13X360:~$ sudo su&#xA;root@HPSpectre13X360:/home/family# coredumpctl gdb&#xA;           PID: 38010 (WebKitWebProces)&#xA;           UID: 1000 (family)&#xA;           GID: 1000 (family)&#xA;        Signal: 5 (TRAP)&#xA;     Timestamp: Sat 2023-01-14 21:29:05 CET (9s ago)&#xA;  Command Line: /usr/libexec/webkit2gtk-4.1/WebKitWebProcess 284 26&#xA;    Executable: /usr/libexec/webkit2gtk-4.1/WebKitWebProcess&#xA; Control Group: /user.slice/user-1000.slice/user@1000.service/app-flatpak-org.gnome.Epiphany-37999.scope&#xA;          Unit: user@1000.service&#xA;     User Unit: app-flatpak-org.gnome.Epiphany-37999.scope&#xA;         Slice: user-1000.slice&#xA;     Owner UID: 1000 (family)&#xA;       Boot ID: e3bb3d5594c849738401466cab790526&#xA;    Machine ID: c6835bfbf14764bf68e1123c63b95333&#xA;      Hostname: HPSpectre13X360&#xA;       Storage: /var/lib/systemd/coredump/core.WebKitWebProces.1000.e3bb3d5594c849738401466cab790526.38010.1673728145000000000000.lz4 (truncated)&#xA;       Message: Process 38010 (WebKitWebProces) of user 1000 dumped core.&#xA;                &#xA;                Stack trace of thread 11:&#xA;                #0  0x00007f057a74bf27 n/a (n/a + 0x0)&#xA;&#xA;&#xA;Failed to invoke gdb: Datei oder Verzeichnis nicht gefunden&#xA;-- Notice: 1 systemd-coredump@.service unit is running, output may be incomplete.&#xA;root@HPSpectre13X360:/home/family# &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Not sure what to do with this.&lt;/p&gt;&#xA;" OwnerUserId="31169" LastEditorUserId="31169" LastEditDate="2023-01-14T20:42:03.677" LastActivityDate="2024-02-09T00:04:10.527" Title="Epiphany web browser not working after update" Tags="|epiphany|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30079" PostTypeId="2" ParentId="30075" CreationDate="2023-01-08T19:23:53.527" Score="0" Body="&lt;p&gt;The solution, after a bit of navel grazing, was to delete the folders in the /home folder and replace them with symbolic links to the appropriated folders in the mounted drive.&lt;/p&gt;&#xA;" OwnerUserId="31146" LastEditorUserId="31146" LastEditDate="2023-01-29T18:20:33.300" LastActivityDate="2023-01-29T18:20:33.300" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30080" PostTypeId="2" ParentId="30078" CreationDate="2023-01-08T20:52:19.210" Score="0" Body="&lt;blockquote&gt;&#xA;&lt;p&gt;[ 1832.905697] traps: eadedCompositor[42368] trap int3 ip:7fe3038caf27 sp:7fe28fffddd0 error:0 in libglib-2.0.so.0.7400.1[7fe303887000+95000]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;It's crashing. Follow &lt;a href=&quot;https://blogs.gnome.org/mcatanzaro/2021/09/18/creating-quality-backtraces-for-crash-reports/&quot; rel=&quot;nofollow noreferrer&quot;&gt;these instructions&lt;/a&gt; to get a useful crash report so you can report a bug.&lt;/p&gt;&#xA;" OwnerUserId="10316" LastActivityDate="2023-01-08T20:52:19.210" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30082" PostTypeId="2" ParentId="21660" CreationDate="2023-01-10T19:47:49.983" Score="0" Body="&lt;p&gt;AppCenter now only allows you to install Flatpak apps, so I'm not sure how relevant this answer is going to be to your situation three years ago, but here goes…&lt;/p&gt;&#xA;&lt;p&gt;In 2023, with elementary OS Jólnir (6.1, based on Ubuntu 20.04), here are the steps to get Wine installed. Unless you need the absolute latest-and-greatest Wine, I think it would be fine to just install the distro packages as root (assuming you have admin rights), and avoid the &lt;a href=&quot;https://old.reddit.com/r/linux_gaming/comments/xlpkpn/tips_install_and_use_wine_using_flatpak/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatpak option for Wine&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo -s  # get a root shell&#xA;apt install wine&#xA;&#xA;# if you need 32-bit support for Wine&#xA;dpkg --add-architecture i386&#xA;apt update&#xA;apt install wine32&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I don't totally understand the circumstances where you need to install the 32-bit components, but those steps are there if you need them.&lt;/p&gt;&#xA;&lt;p&gt;As far as running installation programs or &lt;code&gt;.msi&lt;/code&gt; files, the experience is not nearly as nice in elementary OS as other Linux distros, in that &lt;code&gt;.exe&lt;/code&gt; and &lt;code&gt;.msi&lt;/code&gt; files don't seem to be properly associated with a Wine runtime. I haven't put the effort in to ascertain how the other distros do it, but I imagine it's something buried in some &lt;code&gt;.,desktop&lt;/code&gt; file somewhere.&lt;/p&gt;&#xA;&lt;p&gt;Anyway, here's the command-line version:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# for a .exe file&#xA;wine /path/to/installer.exe&#xA;&#xA;# for a .msi file&#xA;wine msiexec /i /path/to/installer.msi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You can drag-and-drop from the file manager into the terminal app to get the &lt;code&gt;/path/to/installer&lt;/code&gt;. Or right-click and choose &amp;quot;Copy&amp;quot; from the file manager to put the path in the clipboard. You don't have to type that from scratch.&lt;/p&gt;&#xA;&lt;p&gt;Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastActivityDate="2023-01-10T19:47:49.983" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30084" PostTypeId="2" ParentId="29329" CreationDate="2023-01-15T13:30:36.390" Score="1" Body="&lt;p&gt;Wow.  I grabbed a copy.&lt;/p&gt;&#xA;&lt;p&gt;As a recent adopter of EOS, this is an eyeful for an OS that purports itself to be: &amp;quot;The thoughtful, capable, and ethical replacement for Windows and macOS&amp;quot;&lt;/p&gt;&#xA;&lt;p&gt;I'm absolutely certain that no Windows or macOS user had to got through the gyrations described above to obtain a useable system.&lt;/p&gt;&#xA;&lt;p&gt;I'll be honest.  The luster is tarnishing. Simple things like mapping drives from my NAS, getting a webcam working, etc. have turned into major command line exercises. This is definitely still a Linux system.&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-01-15T13:30:36.390" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30087" PostTypeId="1" AcceptedAnswerId="30088" CreationDate="2023-01-23T11:56:33.760" Score="0" ViewCount="27" Body="&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/BEdf6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/BEdf6.jpg&quot; alt=&quot;&quot; /&gt;&lt;/a&gt;&#xA;latest update has failed, anybody has any idea, please?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2023-01-24T06:52:06.543" Title="system update - failed to update libgranite5" Tags="|updates|system|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30088" PostTypeId="2" ParentId="30087" CreationDate="2023-01-24T06:52:06.543" Score="1" Body="&lt;p&gt;You should find out why you have the old Granite package in the first place. The current Granite package for eOS 6.x is 6.2, and you probably have some old apps installed by hand. Try to find out if there's a Flatpak version of that old app and use that one.&lt;/p&gt;&#xA;&lt;p&gt;From my experience, you can get some old apps to run but only if they depend on &lt;code&gt;libgranite5&lt;/code&gt; package and only that package. If the app needs a complete Granite stack you may end up with errors like you've described.&lt;/p&gt;&#xA;" OwnerUserId="31195" LastActivityDate="2023-01-24T06:52:06.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30091" PostTypeId="2" ParentId="29972" CreationDate="2023-01-25T16:54:43.010" Score="0" Body="&lt;p&gt;The answer is to press the Control key. That brings the computer out of sleep/suspension in a few seconds.&lt;/p&gt;&#xA;" OwnerUserId="28123" LastActivityDate="2023-01-25T16:54:43.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30092" PostTypeId="1" CreationDate="2023-01-25T19:05:48.100" Score="0" ViewCount="29" Body="&lt;p&gt;over the last months I have used this laptop only to play Dota 2. Thats the only videogame this computer has. This computer has over 200GB space but it says to me periodically that it is running out of space with less than 1GB. I dont understand what is taking up so much space, when I revise it on the File Manager it only shows me icons of files with locks on the corner. I can open them but I dont understand how to find or even if im supposed to delete any of this to make space. If I could reset the operating system I would have no problem cause I only have the game here but apparently my only option is to reinstall the OS according to the internet. I would love some help to fix my problem, thanks!&lt;/p&gt;&#xA;" OwnerUserId="31197" LastActivityDate="2023-01-29T16:14:32.397" Title="Run out of disk space although I have only 1 program" Tags="|release-hera|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30098" PostTypeId="1" CreationDate="2023-01-31T20:16:18.463" Score="3" ViewCount="4066" Body="&lt;p&gt;It is so bothersome to reinstall everything.&#xA;Is it so difficult to provide the chance&#xA;to simply upgrade from 6.1 to 7&#xA;without erasing the disk?&#xA;As elementary OS is based on Ubuntu,&#xA;there must be a way...&lt;/p&gt;&#xA;" OwnerUserId="30997" LastActivityDate="2023-12-01T22:05:25.650" Title="can I upgrade from 6.1 to 7?" Tags="|system-installation|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30099" PostTypeId="2" ParentId="30098" CreationDate="2023-01-31T21:26:14.753" Score="1" Body="&lt;p&gt;The &lt;a href=&quot;https://github.com/elementary/os/wiki/Release-Upgrades#performing-a-release-upgrade&quot; rel=&quot;nofollow noreferrer&quot;&gt;release upgrade guide&lt;/a&gt; suggests this is not possible currently, so you cannot do an in-place upgrade from 6 to 7, for this release upgrade:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;a fresh install is currently the only officially-supported way to upgrade&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/elementary/os/wiki/Release-Upgrades#performing-a-release-upgrade&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os/wiki/Release-Upgrades#performing-a-release-upgrade&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31214" LastActivityDate="2023-01-31T21:26:14.753" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30103" PostTypeId="2" ParentId="29946" CreationDate="2023-02-01T20:37:03.320" Score="-1" Body="&lt;p&gt;This problem was frustrating but, luckily, I came across &lt;a href=&quot;https://www.reallinuxuser.com/how-to-add-more-online-accounts-to-elementary-os-by-installing-gnome-control-center/&quot; rel=&quot;nofollow noreferrer&quot;&gt;this solution&lt;/a&gt;. Here is the gist:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;From a terminal, update apt (to make sure the package list is up to date):&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Install the Gnome Control Center and Online Accounts packages:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install gnome-control-center gnome-online-accounts&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Enter the following command into the terminal to open Gnome Control Center with some additional flags:&#xA;&lt;pre&gt;&lt;code&gt;Exec=env XDG_CURRENT_DESKTOP=GNOME gnome-control-center –overview&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;From the left-side list, select &amp;quot;Online Accounts&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;Add any additional accounts you may want&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="15249" LastEditorUserId="25612" LastEditDate="2023-03-22T00:56:38.790" LastActivityDate="2023-03-22T00:56:38.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30105" PostTypeId="2" ParentId="21811" CreationDate="2023-02-02T10:32:21.520" Score="0" Body="&lt;p&gt;I found the workaround via a shell script. You need to save it as .sh file and execute it with custom keyboard shortcuts in settings set to &lt;code&gt;⌘&lt;/code&gt;+&lt;code&gt;Space&lt;/code&gt;. Also be sure to disable all current bindings to &lt;code&gt;⌘&lt;/code&gt;+&lt;code&gt;Space&lt;/code&gt; before setting your own.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;if [ &amp;quot;`gsettings get org.gnome.desktop.input-sources current`&amp;quot; = &amp;quot;uint32 0&amp;quot; ]&#xA;then&#xA;    gsettings set org.gnome.desktop.input-sources current 1&#xA;else&#xA;    gsettings set org.gnome.desktop.input-sources current 0&#xA;fi&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="24694" LastActivityDate="2023-02-02T10:32:21.520" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30108" PostTypeId="1" CreationDate="2023-02-03T10:11:01.367" Score="0" ViewCount="1642" Body="&lt;p&gt;After the installation of Horus, I wanted to hide the grub menu and also add a line to prevent the following warning message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Warning: os-prober will not be executed to detect other bootable partitions.&#xA;Systems on them will not be added to the GRUB boot configuration.&#xA;Check GRUB_DISABLE_OS_PROBER documentation entry.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;However, whatever I do with the &lt;code&gt;/etc/default/grub&lt;/code&gt; file, followed by &lt;code&gt;sudo update-grub&lt;/code&gt;, nothing gets reflected on the grub menu.&lt;/p&gt;&#xA;&lt;p&gt;Not only was I unable to hide a menu or change the time countdown from 30 seconds, but the previous warning message is still displaying.&lt;/p&gt;&#xA;&lt;p&gt;Here is my &lt;code&gt;/etc/default/grub&lt;/code&gt; file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;GRUB_DEFAULT=0&#xA;GRUB_TIMEOUT_STYLE=hidden&#xA;GRUB_TIMEOUT=1&#xA;GRUB_DISTRIBUTOR=&amp;quot;`lsb_release -d -s 2&amp;gt; /dev/null || echo Debian`&amp;quot;&#xA;GRUB_CMDLINE_LINUX_DEFAULT=&amp;quot;quiet splash&amp;quot;&#xA;GRUB_CMDLINE_LINUX=&amp;quot;&amp;quot;&#xA;GRUB_DISABLE_OS_PROBER=true&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I also tried with quotes around values, but still, nothing happened&lt;/p&gt;&#xA;&lt;p&gt;The changes were persistent after the boot after each change, but the behavior of the grub menu remained the same.&lt;/p&gt;&#xA;&lt;p&gt;Is there a new, different way the grub works now in Horus? Should I be editing a different file?&lt;/p&gt;&#xA;&lt;p&gt;Cheers.&lt;/p&gt;&#xA;" OwnerUserId="31223" LastActivityDate="2023-02-25T10:24:11.900" Title="In elementary OS 7 cannot change grub config" Tags="|system|grub|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30112" PostTypeId="1" CreationDate="2023-02-04T14:03:47.097" Score="0" ViewCount="106" Body="&lt;p&gt;I have a strange combination of behaviour on my MacBook Pro 2012 that has been running fine until recently.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;After a holiday, I tried to start it and nothing happened. I heard some quiet startup fan noise in an interval of about 2 seconds. This noise appeared faster (about 1 second interval) when I pressed the power key.&lt;/li&gt;&#xA;&lt;li&gt;At first I thought of a hardware problem. I opened the back, and detached the battery to see if it was taking too much from the power supply, but it didn't change the behaviour.&lt;/li&gt;&#xA;&lt;li&gt;I asked the web and found the &amp;quot;power cycle&amp;quot; key combination (detach power cable, then press and keep pressed power button for 10+ seconds, then re-attach power cable while keeping the button pressed for 10 seconds). After 10+4 seconds, I heard a startup noise with the fans going maximum fast and loud, and the Apple startup sound. But the display remained black. After around 30 seconds, the system turned off and then automatically re-started, looping the ca. 30 seconds startup attempts.&lt;/li&gt;&#xA;&lt;li&gt;Keeping the Alt-Button pressed while starting succeeded in accessing the Boot menu. I can see my installation there and I can select it. But afterwards, the display remains black and the computer turns down after about 30 seconds.&lt;/li&gt;&#xA;&lt;li&gt;I can also attach an elementaryOS-Installation-USB stick, and select in in the Boot menu. Then, I will see some Logging on the screen, but again, the system will be turning down after about 30 seconds.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I am still not sure whether this is more a hardware or a software problem. I can access the startup phase of elementaryOS, at least when choosing the USB stick. Probably also the elementaryOS installed on my harddisk starts to load, only it does not show any logging. So I made to believe this is an elementary problem.&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Has anyone experienced a similar behaviour?&lt;/li&gt;&#xA;&lt;li&gt;Does anyone have an idea what the problem is? Or even how to fix it?&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;I won't be shy to try to re-install elementaryOS, once I know how to save my data. Thank you!&lt;/p&gt;&#xA;&lt;h1&gt;EDIT 1 :&lt;/h1&gt;&#xA;&lt;p&gt;Pressing ESC for around 2.5 seconds when the Apple startup sound occurred, I was able to enter the GRUB boot selection and chose the recovery mode there. This showed me some boot logs which I filmed off screen. The boot logs looked fine until they were suddenly ending. Since they didn't end at the very same line each time I filmed them, I was starting to think about the RAM being a problem here.&lt;/p&gt;&#xA;&lt;p&gt;I cannot unmount the hard wired RAM. So I am going to try to read the SDD with a 24 PIN to SATA / USB adapter. I am going to update once I know about the state of the SDD.&lt;/p&gt;&#xA;&lt;h1&gt;EDIT 2 :&lt;/h1&gt;&#xA;&lt;p&gt;As suggested by Vlad, I had the memtest running, for over 8 hours. Found 0 errors.&lt;/p&gt;&#xA;" OwnerUserId="26474" LastEditorUserId="26474" LastEditDate="2023-02-06T21:18:57.327" LastActivityDate="2023-02-06T21:18:57.327" Title="ElementaryOS on Macbook Pro 2012 does not start any more" Tags="|macbook|startup|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30117" PostTypeId="1" AcceptedAnswerId="30119" CreationDate="2023-02-07T02:28:40.787" Score="1" ViewCount="165" Body="&lt;p&gt;I'm trying to use progress web apps on EOS7 but have been unsuccessful. I'm using the flatpak version of chrome and when i select the install as web app option, i receive a message saying that the browser doesn't have permission to access the application folder...I tried to grant permission but ended up deleting the keyring. How can i successfully install PWAs on EOS7 using chrome?&lt;/p&gt;&#xA;" OwnerUserId="31235" LastActivityDate="2023-03-22T01:34:09.360" Title="Using Progressive Web Apps on EOS7?" Tags="|google-chrome|" AnswerCount="1" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30118" PostTypeId="1" AcceptedAnswerId="30127" CreationDate="2023-02-07T08:02:59.517" Score="1" ViewCount="160" Body="&lt;p&gt;I have laptop with:&#xA;Dual-Core Intel i5 CPU (&lt;a href=&quot;https://ark.intel.com/content/www/us/en/ark/products/43544/intel-core-i5540m-processor-3m-cache-2-53-ghz.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://ark.intel.com/content/www/us/en/ark/products/43544/intel-core-i5540m-processor-3m-cache-2-53-ghz.html&lt;/a&gt;)&lt;/p&gt;&#xA;&lt;p&gt;and I would like to determine maximum supported display resolution (in order to connect external monitor)&lt;/p&gt;&#xA;&lt;p&gt;am using HDMI to connect laptop(Dell Latitude E6410) to external monitor (benq GW2765 with native resolution 2560x1440)&lt;/p&gt;&#xA;&lt;p&gt;At the moment only available max resolution in Settings in EOS is 1920x1080 and I want to change it to 2560x1440 (which is a native resolution for my LCD monitor)&lt;/p&gt;&#xA;&lt;p&gt;but it is not shown as an option?&lt;/p&gt;&#xA;&lt;p&gt;Want to see whether it is because it is not supported by laptop&#xA;or can I change something in Elementary?&#xA;I am running 6.1 Jolnir&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 1:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;xrandr didn't work :-(&lt;/p&gt;&#xA;&lt;p&gt;I wasn't able to add the display mode I wanted, but...&lt;/p&gt;&#xA;&lt;p&gt;I learned how to use dual monitor with Elementary (very easy)&lt;/p&gt;&#xA;&lt;p&gt;I have changed external monitor settings to scale 1:1 to avoid distortion caused by using non-native display&lt;/p&gt;&#xA;&lt;p&gt;and now with my CAD application shared between two screens (see below) it is reasonably usable&lt;/p&gt;&#xA;&lt;p&gt;I am now convinced that the limitation is my laptop rather than anything else&lt;/p&gt;&#xA;&lt;p&gt;(I have checked what GPU is available on laptop, using &lt;code&gt;lspci&lt;/code&gt; command)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;so, it sounds like I am stuck with this one :-(&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE 2:&lt;/strong&gt;&#xA;Well... I was WRONG :-)&lt;/p&gt;&#xA;&lt;p&gt;it is possible to add another display resolution!&lt;/p&gt;&#xA;&lt;p&gt;The trick is to run &lt;code&gt;xrandr&lt;/code&gt; before doing anything else to establish which monitor/connection is called what (as you @Vlad have quite correctly pointed out and I have missed ...)&lt;/p&gt;&#xA;&lt;p&gt;The result:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Xoxcr.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;You can see that 2560x1440 is available to choose!&lt;/p&gt;&#xA;&lt;p&gt;Resulting display still has black areas around it,&lt;/p&gt;&#xA;&lt;p&gt;but it is definitely usable (especially when using both monitors)&lt;/p&gt;&#xA;&lt;p&gt;This maybe related to the message I get when setting output of HDMI to new mode? (I don't like the word &lt;code&gt;failed&lt;/code&gt; ??)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bambuko@LatitudeE641005543265:~$ xrandr --output HDMI-1 --mode 2560x1440_60.00&#xA;xrandr: Configure crtc 0 failed&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Further confirmed by running:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bambuko@LatitudeE641005543265:~$ xrandr --listactivemonitors&#xA;Monitors: 2&#xA; 0: +*HDMI-1 1920/597x1080/336+0+0  HDMI-1&#xA; 1: +eDP-1 1280/303x800/190+320+1080  eDP-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;where it should be (if successful)&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;+HDMI-1 2560/***x1440/***+*+* HDMI-1&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;searching the web for &lt;code&gt;xrandr: Configure crtc 0 failed&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;returns a lot, but none of it makes any sense to me yet...&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bambuko@LatitudeE641005543265:~$ lspci -knn | grep -iA3 'vga\|3d\|display'&#xA;00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)&#xA;    Subsystem: Dell Latitude E6410 [1028:040a]&#xA;    Kernel driver in use: i915&#xA;    Kernel modules: i915&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;for reference:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://linux.die.net/man/1/xrandr&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://linux.die.net/man/1/xrandr&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://youtu.be/MWNpSgX6Eg0&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://youtu.be/MWNpSgX6Eg0&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/73007/cant-set-a-higher-screen-resolution-in-a-external-display-in-a-dell-mini-10v-la&quot;&gt;https://askubuntu.com/questions/73007/cant-set-a-higher-screen-resolution-in-a-external-display-in-a-dell-mini-10v-la&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="9445" LastEditDate="2023-02-10T20:30:00.320" LastActivityDate="2023-02-10T20:30:00.320" Title="How can I determine maximum supported display resolution?" Tags="|settings|display|" AnswerCount="1" CommentCount="7" ContentLicense="CC BY-SA 4.0" />
  <row Id="30119" PostTypeId="2" ParentId="30117" CreationDate="2023-02-07T08:10:45.873" Score="0" Body="&lt;p&gt;As Vlad mentioned in his comment, Google does not offer an officially supported Flatpak of Chrome. You can install it as a &lt;code&gt;.deb&lt;/code&gt; file, though:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Using a browser or terminal, download the &lt;code&gt;.deb&lt;/code&gt; from here:&#xA;&lt;pre&gt;&lt;code&gt;https://dl.google.com/linux/direct/google-chrome-stable_current_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Install it by double-clicking the file in the UI or, if you prefer to use the terminal, with &lt;code&gt;apt&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install ./google-chrome-stable_current_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;When installing Chrome, the source for the package will be added to your &lt;code&gt;apt&lt;/code&gt; sources list. You can confirm it exists by checking the &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; directory for a file named &lt;code&gt;google-chrome.list&lt;/code&gt;. This will ensure that Chrome receives updates as they become available.&lt;/p&gt;&#xA;" OwnerUserId="31224" LastEditorUserId="25612" LastEditDate="2023-03-22T01:34:09.360" LastActivityDate="2023-03-22T01:34:09.360" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30121" PostTypeId="1" CreationDate="2023-02-08T17:38:27.183" Score="0" ViewCount="260" Body="&lt;p&gt;I am unable to complete updates to my newly installed Horus system.&lt;/p&gt;&#xA;&lt;p&gt;Org.freedesktop.Platform.GL.default will simply refuse to update.&lt;/p&gt;&#xA;&lt;p&gt;Even via terminal.&lt;/p&gt;&#xA;&lt;p&gt;I am stumped.&lt;/p&gt;&#xA;" OwnerUserId="31238" LastActivityDate="2024-03-05T04:03:55.543" Title="Org.freedesktop.Platform.GL.default not updating" Tags="|updates|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30123" PostTypeId="2" ParentId="30121" CreationDate="2023-02-08T23:18:07.503" Score="0" Body="&lt;p&gt;Simply run the following command via terminal to fix the issue:&lt;/p&gt;&#xA;&lt;p&gt;pkexec flatpak repair&lt;/p&gt;&#xA;&lt;p&gt;the command will remove the bad references from the ISO then re-install the correct references of the broken references for the flatpak modules&lt;/p&gt;&#xA;" OwnerUserId="31235" LastActivityDate="2023-02-08T23:18:07.503" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30124" PostTypeId="2" ParentId="10174" CreationDate="2023-02-08T23:37:25.437" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://www.ventoy.net/en/index.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;Ventoy&lt;/a&gt; is another neat utility that allows you to select any ISO stored on your USB stick and boot as if it were a CD/DVD.&lt;/p&gt;&#xA;&lt;p&gt;This has been really key to getting around the 32-bit EFI issue on my mid-2007 MacBook (which it sounds like you have too) and has worked wonders.&lt;/p&gt;&#xA;&lt;p&gt;I copied the Elementary 6.1 ISO to my Ventoy stick and I’m able to boot into the Elementary Live CD. I also keep the Clonezilla ISO on the stick for recovery and backup.&lt;/p&gt;&#xA;&lt;p&gt;Give it a shot, it’s sure given my ole little guy new life!&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2023-02-08T23:37:25.437" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30127" PostTypeId="2" ParentId="30118" CreationDate="2023-02-09T18:14:24.840" Score="1" Body="&lt;p&gt;We have a solution!&lt;/p&gt;&#xA;&lt;p&gt;I've spent all day trying various suggestions from interweb (all failing),&lt;/p&gt;&#xA;&lt;p&gt;until I came upon this:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://unix.stackexchange.com/questions/599466/three-monitors-xrandr-configure-crtc-failed&quot;&gt;https://unix.stackexchange.com/questions/599466/three-monitors-xrandr-configure-crtc-failed&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have experimented with various refresh rates instead of the typical 60Hz&lt;/p&gt;&#xA;&lt;p&gt;50Hz still failed, 30Hz was outside the range (screen went black),&lt;/p&gt;&#xA;&lt;p&gt;but with 40Hz it looks just perfect - here the view of 2560x1440 monitor with laptop screen below at 1280x800 working as one&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/CeRUL.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/CeRUL.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This was achieved with following:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;bambuko@LatitudeE641005543265:~$ cvt 2560 1440 40&#xA;# 2560x1440 39.96 Hz (CVT) hsync: 58.98 kHz; pclk: 201.00 MHz&#xA;Modeline &amp;quot;2560x1440_40.00&amp;quot;  201.00  2560 2720 2984 3408  1440 1443 1448 1476 -hsync +vsync&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="26155" LastEditorUserId="26155" LastEditDate="2023-02-10T07:52:23.493" LastActivityDate="2023-02-10T07:52:23.493" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30128" PostTypeId="2" ParentId="30108" CreationDate="2023-02-10T12:38:48.617" Score="1" Body="&lt;p&gt;I experienced the same on elementary Horus. Seems to be an older problem &lt;a href=&quot;https://github.com/elementary/os-patches/issues/178&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/elementary/os-patches/issues/178&lt;/a&gt; .&#xA;Adding &amp;quot;GRUB_RECORDFAIL_TIMEOUT=0&amp;quot; to /etc/default/grub and&#xA;&amp;quot;sudo update-grub worked for me&amp;quot;.&lt;/p&gt;&#xA;" OwnerUserId="31245" LastActivityDate="2023-02-10T12:38:48.617" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30129" PostTypeId="1" CreationDate="2023-02-11T16:52:13.990" Score="0" ViewCount="247" Body="&lt;p&gt;Sooooo,&lt;/p&gt;&#xA;&lt;p&gt;I've got a Dell Inspiron 7437 that runs EOS v6.1 just peachy.&lt;/p&gt;&#xA;&lt;p&gt;Doing a complete disk wipe and the attempting to install EOS 7, it tells me the install failed &amp;quot;possibly&amp;quot; due to a hardware failure. Not the most helpful error statement in the world.&lt;/p&gt;&#xA;&lt;p&gt;I've been through this numerous times, and redownloaded the ISO and made boot USB's using both Linux and Windows with the same result.&lt;/p&gt;&#xA;&lt;p&gt;thoughts&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-02-11T16:52:13.990" Title="EOS 7 install failure" Tags="|system-installation|" AnswerCount="0" CommentCount="9" ContentLicense="CC BY-SA 4.0" />
  <row Id="30131" PostTypeId="1" CreationDate="2023-02-11T20:32:27.717" Score="0" ViewCount="522" Body="&lt;p&gt;I've installed Horus, and on two occasions it has brought me to a new login screen with the account disabled.   So now I can't even log in to run etcher and make a different disk image of something that might work.&lt;/p&gt;&#xA;&lt;p&gt;I do know that the install process automatically does LVM now, which is simply too complicated for me to want to spend time on.&lt;/p&gt;&#xA;&lt;p&gt;Why is this chosen automatically now?&lt;/p&gt;&#xA;" OwnerUserId="31238" LastActivityDate="2023-02-11T20:32:27.717" Title="Horus fresh install: Account Disabled" Tags="|system-installation|greeter|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30135" PostTypeId="1" CreationDate="2023-02-12T20:16:43.597" Score="0" ViewCount="297" Body="&lt;p&gt;I'm trying to upgrade my laptop to OS 7 but I'm running into a kernel panic. This while I can boot into Ubuntu 22.04 created in the same way, booting from the same USB stick.&lt;/p&gt;&#xA;&lt;p&gt;I'm on a Dell XPS 15 9550 (with NVIDIA GTX 960M). I'm using the same USB stick, USB port and Balena Etcher install.&#xA;I've used balenaEtcher-1.14.3-x64.AppImage&#xA;For both I went into bios to put usb drive as first option in the boot sequence.&lt;/p&gt;&#xA;&lt;p&gt;I've Downloaded Ubuntu 22.04.1 (ubuntu-22.04.1-desktop-amd64.iso)&#xA;Selected: Try or install Ubuntu (first option)&#xA;Boots just fine into welcome install screen.&lt;/p&gt;&#xA;&lt;p&gt;Downloaded elementary OS (elementaryos-7.0-stable.20230129rc.iso)&#xA;(using magnet link)&#xA;I've verified the checksum following: &lt;a href=&quot;https://elementary.io/docs/installation#verify-your-download&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://elementary.io/docs/installation#verify-your-download&lt;/a&gt;&#xA;When booting I select the Try or install elementary OS option.&lt;/p&gt;&#xA;&lt;p&gt;I get this error momentarily:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;error: Out of memory.&#xA;Press any key to continue...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;And then the following kernel panic:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[ 0.229634] x86/cpu: SGX disabled by BIOS,&#xA;[ 0.599320] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.H&#xA;EC.ECAV], AE_NOT_FOUND (20210730/psargs-330)&#xA;[ 0.599338] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error&#xA;(AE_NOT_FOUND) (20210730/psparse-529)&#xA;[ 0.599588] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.H&#xA;EC.ECAV], RE_NOT_FOUND (20210730/psargs-330)&#xA;[ 0.599603] ACPI Error: Aborting method \_TZ.TZ00._TMP due to previous error&#xA;(AE_NOT_FOUND) (20210730/psparse-529)&#xA;[ 0.599705] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.H&#xA;EC.ECAV], AE_NOT_FOUND (20210730/psargs-330)&#xA;[ 0.599718] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error&#xA;(AE_NOT_FOUND) (20210730/psparse-529)&#xA;[ 0.599812] ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PCI0.LPCB.H&#xA;EC.ECAV], AE_NOT_FOUND (20210730/psargs-330)&#xA;[ 0.599824] ACPI Error: Aborting method \_TZ.TZ01._TMP due to previous error&#xA;(AE_NOT_FOUND) (20210730/psparse-529)&#xA;[ 0.697892] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)&#xA;[ 0.697968] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.15.0-58-generic #64-Ubuntu&#xA;[ 0.698035] Hardware name: Dell Inc. XPS 15 9550/0N7TVV, BIOS 1.14.0 02/13/2020&#xA;[ 0.698099]  Call Trace:&#xA;[ 0.698122]  &amp;lt;TASK&amp;gt;&#xA;[ 0.698143]  show_stack+0x52/0x5c&#xA;[ 0.698181]  dump_stack_1v1+0x4a/0x63&#xA;[ 0.698217]  dump_stack+0x10/0x16&#xA;[ 0.698248]  panic+0x149/0x321&#xA;[ 0.698279]  mount_block_root+0x144/0x1dd&#xA;[ 0.698318]  mount_root+0x10c/0x11c&#xA;[ 0.698351]  prepare_namespace+0x13f/0x191&#xA;[ 0.698388]  kernel_init_freeable+0x18c/0x1b5&#xA;[ 0.698430]  ? rest_init+0x100/0x100&#xA;[ 0.698464]  kernel_init+0x1b/0x150&#xA;[ 0.698497]  ? rest_init+0x100/0x100&#xA;[ 0.698535]  ret_from_fork+0x1f/0x30&#xA;[ 0.698571]  &amp;lt;/TASK&amp;gt;&#xA;[ 0.698641] Kernel Offset: 0x6800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)&#xA;[ 0.698754] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I've tried reflashing and booting again.&#xA;I've also tried the Save graphics option.&#xA;Both fail.&lt;/p&gt;&#xA;&lt;p&gt;Ubuntu 22.04 is what elementary OS 7 is based on, I don't understand what could be going wrong here.&lt;/p&gt;&#xA;" OwnerUserId="3892" LastEditorUserId="3892" LastEditDate="2023-02-12T20:26:44.813" LastActivityDate="2023-03-08T20:31:25.287" Title="Kernel panic when booting from USB stick to install 7" Tags="|system-installation|kernel|install|live-installation|eos7|" AnswerCount="1" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30136" PostTypeId="2" ParentId="30135" CreationDate="2023-02-12T22:02:03.167" Score="1" Body="&lt;p&gt;I ran into &lt;a href=&quot;https://github.com/elementary/installer/issues/542&quot; rel=&quot;nofollow noreferrer&quot;&gt;this issue&lt;/a&gt;, which resulted in &lt;a href=&quot;https://github.com/elementary/os/pull/609&quot; rel=&quot;nofollow noreferrer&quot;&gt;this PR&lt;/a&gt;. Building the ISO based on that PR following &lt;a href=&quot;https://github.com/elementary/os#64-bit-amdintel&quot; rel=&quot;nofollow noreferrer&quot;&gt;these instructions&lt;/a&gt;, flashing that to an USB stick and then booting from it seems to work!&lt;/p&gt;&#xA;" OwnerUserId="3892" LastActivityDate="2023-02-12T22:02:03.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30137" PostTypeId="1" AcceptedAnswerId="30140" CreationDate="2023-02-14T08:51:19.520" Score="0" ViewCount="261" Body="&lt;p&gt;Decided to install the freshly minted eOS 7 today, super impressed by it all till I tried to install firefox as the Gnome Web simply does not cut it as a daily driver for my browser needs.&lt;/p&gt;&#xA;&lt;p&gt;I was quite surprised to see it installs the snap version, Did I miss something? I though eOS is a flatpak based distro?&lt;/p&gt;&#xA;&lt;p&gt;Is this correct?&lt;/p&gt;&#xA;" OwnerUserId="692" LastEditorUserId="692" LastEditDate="2023-02-15T14:10:47.813" LastActivityDate="2023-08-08T00:56:40.503" Title="Firefox snap instead of default deb or flatpak" Tags="|firefox|camera|" AnswerCount="2" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30138" PostTypeId="2" ParentId="30137" CreationDate="2023-02-14T09:14:14.640" Score="0" Body="&lt;p&gt;I thought you had to install and enable snapd in Elementary&lt;/p&gt;&#xA;&lt;p&gt;(at least I had to in EOS6 before I could use snap apps)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://snapcraft.io/install/snapd/elementary&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://snapcraft.io/install/snapd/elementary&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Haven't found anything saying that it has changed for EOS7 ?&lt;/p&gt;&#xA;" OwnerUserId="26155" LastActivityDate="2023-02-14T09:14:14.640" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30139" PostTypeId="2" ParentId="28500" CreationDate="2023-02-14T15:44:52.373" Score="0" Body="&lt;p&gt;For the second question, elementaryOS 7 (Horus) adds an option in Files to switch between single- and double-click modes. Just right-click in the Files window and there is a new option: &amp;quot;Double-click to Navigate&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="9266" LastActivityDate="2023-02-14T15:44:52.373" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30140" PostTypeId="2" ParentId="30137" CreationDate="2023-02-14T15:46:09.020" Score="3" Body="&lt;p&gt;I believe it has to do with Ubuntu's repo for Firefox forcing snap and not with ElementaryOS. Here's how to add a Firefox repo and install it using apt:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://www.omgubuntu.co.uk/2022/04/how-to-install-firefox-deb-apt-ubuntu-22-04&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.omgubuntu.co.uk/2022/04/how-to-install-firefox-deb-apt-ubuntu-22-04&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31224" LastActivityDate="2023-02-14T15:46:09.020" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30141" PostTypeId="2" ParentId="21244" CreationDate="2023-02-16T06:25:45.903" Score="0" Body="&lt;p&gt;I found the solution here:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers/60395#60395?newreg=39aad30029724c7693799c0ff875d95c&quot;&gt;https://askubuntu.com/questions/55868/installing-broadcom-wireless-drivers/60395#60395?newreg=39aad30029724c7693799c0ff875d95c&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;All the Best,&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Tony&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="31276" LastActivityDate="2023-02-16T06:25:45.903" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30142" PostTypeId="1" CreationDate="2023-02-17T07:29:05.623" Score="0" ViewCount="28" Body="&lt;p&gt;I was poking around in dconf and noticed that &lt;code&gt;io.elementary.desktop.background&lt;/code&gt; has a setting called &lt;code&gt;dim-wallpaper-in-dark-style&lt;/code&gt;. By default it is off. However, enabling it doesn't seem to do anything, even when dark theme is turned on in System Settings → Desktop → Appearance.&lt;/p&gt;&#xA;&lt;p&gt;Also, in &lt;code&gt;org.gnome.desktop.background&lt;/code&gt; there are two settings for the background image: &lt;code&gt;picture-uri&lt;/code&gt; and &lt;code&gt;picture-uri-dark&lt;/code&gt;. By default &lt;code&gt;picture-uri-dark&lt;/code&gt; is set to &lt;code&gt;'file:///usr/share/backgrounds/gnome/adwaita-d.jpg'&lt;/code&gt;, which doesn't exist in elementary OS. Changing it to a file that &lt;em&gt;does&lt;/em&gt; exist, e. g. /usr/backgrounds/odin-dark.jpg, doesn't do anything—the wallpaper doesn't change if dark theme is on.&lt;/p&gt;&#xA;&lt;p&gt;Is it possible to get the wallpaper to change automatically when the OS is in dark mode, using either of these settings (or something else)?&lt;/p&gt;&#xA;" OwnerUserId="26780" LastActivityDate="2023-02-17T07:29:05.623" Title="Does eOS support separate light and dark desktop backgrounds?" Tags="|settings|desktop|wallpaper|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30143" PostTypeId="1" CreationDate="2023-02-17T08:28:00.203" Score="0" ViewCount="264" Body="&lt;p&gt;Can &lt;code&gt;unetbootin&lt;/code&gt; be installed via the terminal?&lt;/p&gt;&#xA;" OwnerUserId="30997" LastEditorUserId="16827" LastEditDate="2023-03-28T06:48:07.723" LastActivityDate="2023-03-28T06:48:07.723" Title="How can we install Unetbootin on elementary 6.1?" Tags="|usb|iso|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30145" PostTypeId="1" CreationDate="2023-02-23T16:22:50.257" Score="1" ViewCount="90" Body="&lt;p&gt;SUSE studio imagewriter is an excellent tool&#xA;[a GUI utility for writing raw disk images &amp;amp; hybrid ISOs to USB keys],&#xA;with which you can make live memory sticks.&#xA;Can we install it in elementary?&lt;/p&gt;&#xA;" OwnerUserId="30997" LastActivityDate="2024-03-19T21:07:35.907" Title="Can we install suse studio imagewriter in elementary?" Tags="|usb-drive|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30146" PostTypeId="2" ParentId="30145" CreationDate="2023-02-23T17:17:01.883" Score="0" Body="&lt;p&gt;It certainly can be installed on elementary OS. I used the instructions from this &lt;a href=&quot;https://yovantoh.blogspot.com/2015/10/installing-suse-imagewriter-on-linux.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;linux Mint tutorial&lt;/a&gt; . The only change I had to do was replace the &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install qt4-qmake libqt4-dev&lt;/code&gt; with &lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install qt5-default&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;To download the code, you can find the imagewriter repository &lt;a href=&quot;https://github.com/openSUSE/imagewriter&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;, and click on the green 'Code' button -&amp;gt; Download zip. Extract the archive and open a Terminal window inside the new folder. Run the commands one by one, and enjoy!&#xA;&lt;a href=&quot;https://i.stack.imgur.com/OlEOj.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/OlEOj.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;EDIT: Step-by-step commands from tutorial, updated:&lt;br /&gt;&#xA;&lt;code&gt;sudo apt-get update &amp;amp;&amp;amp; sudo apt-get install qt5-default&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;qmake DEFINES=USEHAL imagewriter.pro&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;qmake DEFINES=USEUDISKS2 imagewriter.pro&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;make&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2023-02-23T17:31:49.783" LastActivityDate="2023-02-23T17:31:49.783" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30148" PostTypeId="2" ParentId="29931" CreationDate="2023-02-28T05:10:56.337" Score="0" Body="&lt;p&gt;Just had the same issue. For me increasing the memory to 8GB worked. Hope that helps.&lt;/p&gt;&#xA;" OwnerUserId="31303" LastActivityDate="2023-02-28T05:10:56.337" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30149" PostTypeId="1" CreationDate="2023-03-01T13:28:42.143" Score="0" ViewCount="200" Body="&lt;p&gt;I installed viber desktop from flathub.&#xA;I ran the application on the terminal&#xA;but it didn't start because:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;QQmlApplicationEngine failed to load component&#xA;qrc:/Resources/QML/MainWindow.qml: module &amp;quot;adwaita&amp;quot; is not installed&#xA;qt.core.qobject.connect: QObject::connect(QWindow, ApplicationEngine): invalid nullptr parameter&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;How can I solve this problem?&lt;/p&gt;&#xA;&lt;p&gt;I'm using elementary 6.1.&lt;/p&gt;&#xA;" OwnerUserId="30997" LastEditorUserId="25612" LastEditDate="2023-05-10T02:30:38.483" LastActivityDate="2023-06-09T03:05:30.740" Title="How can I install Viber desktop missing module?" Tags="|flatpak|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30150" PostTypeId="2" ParentId="30149" CreationDate="2023-03-01T17:23:44.433" Score="0" Body="&lt;p&gt;Issue reported and solved here &lt;a href=&quot;https://github.com/flathub/com.viber.Viber/issues/53#issuecomment-1279836789&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/flathub/com.viber.Viber/issues/53#issuecomment-1279836789&lt;/a&gt;. Basically add &lt;code&gt;env QT_STYLE_OVERRIDE=&amp;quot;&amp;quot;&lt;/code&gt; to the launcher.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open the Files app and click &lt;code&gt;Home&lt;/code&gt; in the left side bar;&lt;/li&gt;&#xA;&lt;li&gt;On the upper-right corner, click the cogwheel menu icon -&amp;gt; check &lt;code&gt;Hidden files&lt;/code&gt; (you should now see some folders with a dot in front, find the one named .local)&lt;/li&gt;&#xA;&lt;li&gt;Navigate to &lt;code&gt;.local/share/flatpak/app/com.viber.Viber/x86_64/stable/active/export/share/applications&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Double click the &lt;code&gt;com.viber.Viber.desktop&lt;/code&gt; file to open it in Code editor.&lt;/li&gt;&#xA;&lt;li&gt;Look for the line starting with &lt;code&gt;Exec=&lt;/code&gt;.&lt;/li&gt;&#xA;&lt;li&gt;After the &lt;code&gt;=&lt;/code&gt; sign, add &lt;code&gt;env QT_STYLE_OVERRIDE=&amp;quot;&amp;quot;&lt;/code&gt; so it looks like &lt;code&gt;Exec=env QT_STYLE_OVERRIDE=&amp;quot;&amp;quot; /usr/bin/flatpak run --bra&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;use Ctrl + S to save the file&lt;/li&gt;&#xA;&lt;li&gt;Try starting Viber now from the Applications menu.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/L7DZ0.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/L7DZ0.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2023-03-03T05:14:52.900" LastActivityDate="2023-03-03T05:14:52.900" CommentCount="17" ContentLicense="CC BY-SA 4.0" />
  <row Id="30151" PostTypeId="1" CreationDate="2023-03-02T19:08:36.113" Score="1" ViewCount="52" Body="&lt;p&gt;Just upgraded my miniPC from Elementary OS6 to OS7 and my screen (iiyama 27&amp;quot;) has an awful blue/green colour cast. eos5 and eos6 ran perfectly, no problems with colour balance but eos7 is unuseable unless I can sort this problem.&lt;/p&gt;&#xA;&lt;p&gt;Any suggestions?&lt;/p&gt;&#xA;&lt;p&gt;Neil&lt;/p&gt;&#xA;&lt;p&gt;PS When starting eos7, the colour balance of the login screen is fine but when the login screen clears the colour cast returns.&#xA;PPS Have upgraded my HP laptop to eos7 without any issues.&lt;/p&gt;&#xA;" OwnerUserId="25015" LastEditorUserId="25612" LastEditDate="2023-03-24T06:13:51.897" LastActivityDate="2023-03-24T06:13:51.897" Title="Elementary OS7 Horus, horrible colour cast" Tags="|updates|color|horus|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30153" PostTypeId="1" AcceptedAnswerId="30154" CreationDate="2023-03-03T10:57:35.743" Score="1" ViewCount="54" Body="&lt;p&gt;I installed Elementary OS 7.0 Horus and downloaded Chrome and Firefox browsers. &lt;br&gt;&#xA;Chrome - via dpkg after downloading the .deb file &lt;br&gt;&#xA;Firefox - via apt - snap downloaded and installed &lt;br&gt;&lt;/p&gt;&#xA;&lt;p&gt;Using &lt;b&gt;Alacarte&lt;/b&gt; app, I set the icons for both the applications. &lt;br&gt;&#xA;I am able to see these app icons in the dock. &lt;br&gt;&lt;/p&gt;&#xA;&lt;p&gt;However, after opening the apps and switching between them using Alt + Tab, I see 'Star in Purple box' icons for both Chrome and Firefox. It becomes a bit difficult for me to identify the apps in this case. &lt;br&gt;&lt;/p&gt;&#xA;&lt;p&gt;Could someone please mention what could be going wrong and how to fix them? &lt;br&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks, &lt;br&gt;&#xA;Praseo&lt;/p&gt;&#xA;" OwnerUserId="31309" LastEditorUserId="25612" LastEditDate="2023-03-24T06:13:20.270" LastActivityDate="2023-03-24T06:13:20.270" Title="'Star in Purple box' icon for downloaded apps while switching tabs using Alt + Tab" Tags="|icons|elementary-project|horus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30154" PostTypeId="2" ParentId="30153" CreationDate="2023-03-03T16:19:36.733" Score="1" Body="&lt;p&gt;I'm using AppEditor for years, you can find it in AppCenter, and never had an issue with it. I believe it has been originally developed for elementaryOS, so maybe try it.&lt;/p&gt;&#xA;" OwnerUserId="31224" LastActivityDate="2023-03-03T16:19:36.733" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30155" PostTypeId="1" CreationDate="2023-03-05T04:12:31.100" Score="1" ViewCount="32" Body="&lt;p&gt;Say you have the output of &lt;code&gt;fdisk -l&lt;/code&gt; for your drive, which has Start,End,Blocks,Id,System&lt;/p&gt;&#xA;&lt;p&gt;What's the best(ie=easiest/quickest yet accurate) way to recreate the partitions from that?&lt;/p&gt;&#xA;&lt;p&gt;Simply running &lt;code&gt;fdisk /dev/sdX&lt;/code&gt; will ask for sectors or size of partition not &amp;quot;Blocks&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Ideally a way to convert the &lt;code&gt;fdisk -l&lt;/code&gt; file. I have to &lt;code&gt;sfdisk -d&lt;/code&gt; output format would be nice since then I could easily just do a &lt;code&gt;sfdisk /dev/sdX &amp;lt; fdisk-l_convertedto_sfdisk-d.txt&lt;/code&gt;&lt;/p&gt;&#xA;" OwnerUserId="31314" LastEditorUserId="1239" LastEditDate="2023-03-22T02:43:31.973" LastActivityDate="2023-03-22T02:43:31.973" Title="Best way to recreate Partitions on a hard disk using previous output of &quot;fdisk -l&quot; on Linux" Tags="|disk-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30156" PostTypeId="2" ParentId="30155" CreationDate="2023-03-06T02:53:37.180" Score="1" Body="&lt;p&gt;It seems I may have stumbled on what the problem was. It seems my &lt;code&gt;fdisk -l&lt;/code&gt; output was from old version of fdisk which used &amp;quot;cylinders&amp;quot; as the output. Starting fdisk with: &lt;code&gt;fdisk -c=dos -u=cylinders /dev/sdX&lt;/code&gt; seems to &amp;quot;finally allow&amp;quot; me to use start/end values from my &lt;code&gt;fdisk -l&lt;/code&gt; output. Also I discovered the &amp;quot;Blocks&amp;quot; in fdisk output is actually &amp;quot;kb&amp;quot; so its easy to calculate size of the partition.&lt;/p&gt;&#xA;&lt;p&gt;Hope it helps others, if you can't figure out why Start/End values aren't accepted or don't match you may simply need to start your newer fdisk with compatibility mode set to &lt;code&gt;dos&lt;/code&gt; and &lt;code&gt;-u&lt;/code&gt; set to &lt;code&gt;cylinders&lt;/code&gt;.&lt;/p&gt;&#xA;" OwnerUserId="31314" LastEditorUserId="1239" LastEditDate="2023-03-22T02:41:16.720" LastActivityDate="2023-03-22T02:41:16.720" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30157" PostTypeId="1" CreationDate="2023-03-06T09:17:36.657" Score="1" ViewCount="387" Body="&lt;p&gt;When I install a flathub app, using the terminal,&#xA;the following message appears:&lt;/p&gt;&#xA;&lt;p&gt;flatpak install flathub org.libretro.RetroArch&#xA;Looking for matches…&#xA;Remote ‘flathub’ found in multiple installations:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;system&lt;/li&gt;&#xA;&lt;li&gt;user&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Which do you want to use (0 to abort)? [0-2]: 1&lt;/p&gt;&#xA;&lt;p&gt;Should I &lt;strong&gt;erase&lt;/strong&gt; one of these flathub installations,&#xA;and how?&lt;/p&gt;&#xA;" OwnerUserId="30997" LastEditorUserId="30997" LastEditDate="2023-03-06T13:20:22.683" LastActivityDate="2023-03-06T13:20:22.683" Title="How can I remove ‘flathub’ found in multiple installations?" Tags="|flatpak|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30159" PostTypeId="2" ParentId="29605" CreationDate="2023-03-06T21:12:41.630" Score="0" Body="&lt;p&gt;I had this happen while trying the OS out in a virtual machine. Went into my host pc's browser to search for how to log in, but by the time I looked back at the installation window there was a dialog asking for language/keyboard choices. I &lt;em&gt;think&lt;/em&gt; maybe the login request times itself out if it isn't answered. I seem to be proceeding with the installation, anyway. Hope this helps.&lt;/p&gt;&#xA;" OwnerUserId="31320" LastActivityDate="2023-03-06T21:12:41.630" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30160" PostTypeId="1" CreationDate="2023-03-07T21:19:16.200" Score="0" ViewCount="83" Body="&lt;p&gt;How i can Disable Animations in Elementary Os Pantheon&lt;/p&gt;&#xA;" OwnerUserId="31323" LastEditorUserId="25612" LastEditDate="2023-03-24T06:12:40.247" LastActivityDate="2023-03-24T06:12:40.247" Title="Elementary Os 7 Horus Disable Animations" Tags="|desktop|pantheon|horus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30162" PostTypeId="6" CreationDate="2023-03-08T06:21:04.517" Score="0" Body="&lt;h1&gt;matigo&lt;/h1&gt;&#xA;&lt;p&gt;Although I have not been incredibly active on eOS SE lately, I would like to throw my hat into the ring for consideration. I have been an active Linux user since the late 90s and have watched it evolve from a simple text-based operating system to what it is today, powering devices big and small across the solar system. elementary OS is not my daily driver, but I do have a ThinkPad Carbon dedicated to Horus, and virtual machines for earlier releases.&lt;/p&gt;&#xA;&lt;p&gt;Moderation of a Stack Exchange community requires a good bit of humility and the ability to sympathise. I wrote &lt;a href=&quot;https://askubuntu.com/election/8?tab=election#post-1397792&quot;&gt;a number of detailed answers&lt;/a&gt; regarding possible challenges when running to be a moderator on AskUbuntu, &lt;a href=&quot;https://askubuntu.com/users/1222991/matigo&quot;&gt;where I am most active&lt;/a&gt;, and would follow the same principles here.&lt;/p&gt;&#xA;&lt;p&gt;Questions, comments, or concerns? Feel free to reach out. I can be found on SE for sixteen hour of every day but Sunday &lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-08T06:21:04.517" LastActivityDate="2023-03-08T06:21:04.517" CommentCount="0" CommunityOwnedDate="2023-03-08T06:21:04.517" ContentLicense="CC BY-SA 4.0" />
  <row Id="30163" PostTypeId="2" ParentId="30160" CreationDate="2023-03-08T10:36:20.690" Score="2" Body="&lt;p&gt;There are several Gala options regarding animation, but mind you I haven't tested any of them.&lt;/p&gt;&#xA;&lt;p&gt;I prefer to use dconf-editor. You can install it with &lt;code&gt;sudo apt install dconf-editor&lt;/code&gt; and navigate to org -&amp;gt; pantheon -&amp;gt; desktop -&amp;gt; gala -&amp;gt; animations.&lt;/p&gt;&#xA;&lt;p&gt;Here's the screenshot:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/RkTIV.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/RkTIV.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31224" LastActivityDate="2023-03-08T10:36:20.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30165" PostTypeId="2" ParentId="19114" CreationDate="2023-03-10T07:57:35.303" Score="0" Body="&lt;p&gt;With Elementary OS 7 (Horus) the setting seems not to be available in pantheon-tweaks anymore. I found that the gsetting key changed:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# Use single click to select only    &#xA;gsettings set io.elementary.files.preferences singleclick-select true &#xA;&#xA;# Single click opens folders directly&#xA;gsettings set io.elementary.files.preferences singleclick-select false &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="31330" LastActivityDate="2023-03-10T07:57:35.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30166" PostTypeId="1" AcceptedAnswerId="30180" CreationDate="2023-03-12T00:19:06.377" Score="2" ViewCount="890" Body="&lt;p&gt;How can we display the &amp;quot;old&amp;quot; (and frequently still needed / required) system tray / indicator icons for apps like TeamViewer and so forth?&lt;/p&gt;&#xA;&lt;p&gt;Without this, TeamViewer complains about it not being present and showing a warning that TeamViewer will run hidden. Other apps that are new or still updated need this functionality as well.&lt;/p&gt;&#xA;" OwnerUserId="3600" LastEditorUserId="25612" LastEditDate="2023-03-24T06:12:23.400" LastActivityDate="2023-03-24T06:12:23.400" Title="Elementary OS 7 (Horus) compatibility with Ubuntu / Unity indicators on Pantheon's Wingpanel (top right menubar)?" Tags="|wingpanel|desktop|pantheon|icons|horus|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30167" PostTypeId="2" ParentId="30166" CreationDate="2023-03-12T00:19:06.377" Score="2" Body="&lt;p&gt;This can be restored by using the still functional &lt;a href=&quot;https://github.com/Lafydev/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;Lafydev/wingpanel-indicator-ayatana&lt;/a&gt; with the following steps:&lt;/p&gt;&#xA;&lt;p&gt;(&lt;em&gt;Also note that active forks can be found with this &lt;a href=&quot;https://techgaun.github.io/active-forks&quot; rel=&quot;nofollow noreferrer&quot;&gt;Active GitHub Forks project&lt;/a&gt; such as searching for the most recent forks of &lt;a href=&quot;https://techgaun.github.io/active-forks/index.html#https://github.com/elementary/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;elementary/wingpanel-indicator-ayatana&lt;/a&gt; which led to &lt;a href=&quot;https://techgaun.github.io/active-forks/#eth-p/wingpanel-indicator-ayatana&quot; rel=&quot;nofollow noreferrer&quot;&gt;eth-p/wingpanel-indicator-ayatana&lt;/a&gt; and then ultimately to Lafydev's most recently updated repository linked to initially above.&lt;/em&gt;)&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;Open Terminal&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Install developmental dependencies:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get install libglib2.0-dev libgranite-dev libindicator3-dev libwingpanel-dev indicator-application valac gcc meson git cmake&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Get the repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/dev/elementary_os&#xA;git clone https://github.com/Lafydev/wingpanel-indicator-ayatana.git ~/dev/elementary_os/lafydev_wingpanel-indicator-ayatana&#xA;cd ~/dev/elementary_os/lafydev_wingpanel-indicator-ayatana&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Build &amp;amp; install the repository:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;meson build --prefix=/usr&#xA;cd build&#xA;ninja&#xA;sudo ninja install&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enable Pantheon autostart (after adding folder to home config autostart folder, modify .desktop file for system to add Pantheon as final entry and then copy file to home config):&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;mkdir -p ~/.config/autostart&#xA;sudo sed -i 's/^OnlyShowIn.*/OnlyShowIn=Unity;GNOME;Pantheon;/' /etc/xdg/autostart/indicator-application.desktop &#xA;cp /etc/xdg/autostart/indicator-application.desktop ~/.config/autostart/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Restart / Reboot system (&lt;code&gt;sudo reboot&lt;/code&gt; if you like)&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Enjoy:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6SvZE.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6SvZE.png&quot; alt=&quot;example of wingpanel indicators restored&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="3600" LastEditorUserId="3600" LastEditDate="2023-03-12T00:41:01.747" LastActivityDate="2023-03-12T00:41:01.747" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30169" PostTypeId="6" CreationDate="2023-03-17T15:37:30.577" Score="0" Body="&lt;h1&gt;Hasan&lt;/h1&gt;&#xA;&lt;p&gt;I have been a moderator in the past in elementary OS Stack Exchange before. I have been busy with my work and couldn't give much time at some point. I would like to resume my focus on elementary OS SE now.&lt;/p&gt;&#xA;&lt;p&gt;As a previous moderator, I am aware of the duties that comes with the role. I intend to fulfill those duties accordingly.&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;" OwnerUserId="16827" LastEditorUserId="16827" LastEditDate="2023-03-17T15:37:30.577" LastActivityDate="2023-03-17T15:37:30.577" CommentCount="0" CommunityOwnedDate="2023-03-17T15:37:30.577" ContentLicense="CC BY-SA 4.0" />
  <row Id="30170" PostTypeId="1" CreationDate="2023-03-17T23:24:37.247" Score="0" ViewCount="70" Body="&lt;p&gt;I had a dual boot installation working well, but the default installation of Elementary OS 7.0 repartitioned my disk and wiped out Windows10. So now I guess I have to manually repartition the disk and reinstall Windows (not something I do every day!).&lt;/p&gt;&#xA;&lt;p&gt;I believe I have a recovery USB around somewhere; could that enable me to recover my old installation? Or do I have to go out and buy Windows10 and start all over from scratch?&lt;/p&gt;&#xA;&lt;p&gt;Please advise!&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-03-17T23:24:37.247" Title="had dual boot installation, but default installation Elementary OS 7 wiped out Windows partition" Tags="|system-installation|dual-boot|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30172" PostTypeId="1" CreationDate="2023-03-18T16:47:48.380" Score="1" ViewCount="58" Body="&lt;p&gt;Installed Thunderbird from the AppCenter (uncurated of course), but when I start it, it wants to setup my Email accounts rather than using the settings in my ~/.thunderbird profile. When I tried instead to run it from the command line to see if there was some option I could give it to make it use my existing profile, I found that it was installed as some kind of containerized application that can't be run from the command line. The &amp;quot;ps&amp;quot; command reveals that is run by bwrap (with --args 42, so I don't even know what args were given to it). I guess that means it's using a virtual namespace, in which it seems my home directory does not exist. Is there some way to fix this, or should I give up and just use the &amp;quot;snap&amp;quot; version (or download it directly from Mozilla for Ubuntu)?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-03-18T18:00:21.680" Title="thunderbird not finding my profile" Tags="|appcenter|applications|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30173" PostTypeId="2" ParentId="30172" CreationDate="2023-03-18T18:00:21.680" Score="1" Body="&lt;p&gt;AppCenter will most likely install the flatpak version of thunderbird. There are a few ways to solve your issue:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Move the contents of your thunderbird profile from ~/.thunderbird to ~/.var/app/org.mozilla.Thunderbird/.thunderbird&lt;br /&gt;&#xA;OR&lt;/li&gt;&#xA;&lt;li&gt;In Terminal, run &lt;code&gt;flatpak run org.mozilla.Thunderbird -P&lt;/code&gt; then select the right profile and tick &amp;quot;Use the selected profile without asking on startup&amp;quot; box.&lt;br /&gt;&#xA;OR&lt;/li&gt;&#xA;&lt;li&gt;Remove the flatpak version and install the one from the ubuntu repos with &lt;code&gt;sudo apt install thunderbird&lt;/code&gt; (this will most likely install an older version than flatpak)&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;For more details on flatpak Thunderbird: &lt;a href=&quot;https://github.com/flathub/org.mozilla.Thunderbird&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/flathub/org.mozilla.Thunderbird&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;If you want to read more uo flatpaks and why we use them: &lt;a href=&quot;https://en.wikipedia.org/wiki/Flatpak&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://en.wikipedia.org/wiki/Flatpak&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;TIP: to see a list of installed flatpak apps use &lt;code&gt;flatpak list&lt;/code&gt;; to remove a flatpak app use &lt;code&gt;flatpak remove org.mozilla.Thunderbird&lt;/code&gt; for example&lt;/p&gt;&#xA;" OwnerUserId="9445" LastActivityDate="2023-03-18T18:00:21.680" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30176" PostTypeId="1" CreationDate="2023-03-20T11:10:50.823" Score="0" ViewCount="20" Body="&lt;p&gt;I have a somewhat ancient HP monitor with a (16:10) 1440 x 900 resolution and a VGA cable (with an HDMI adapter) connected to an Intel NUC.&lt;/p&gt;&#xA;&lt;p&gt;Elementary Horus recognises the monitor and its resolution but will not fill the screen when 16:10 is selected. Other resolutions will fill the screen. Though of course they do look a little funny and make navigating from difficult to entirely impractical.&lt;/p&gt;&#xA;&lt;p&gt;Assuming that this isn't a hardware fault, is there anything that can be done to improve this prospect? Or will I have to summon up the courage to buy a new display?&lt;/p&gt;&#xA;&lt;p&gt;Thanks for your help.&lt;/p&gt;&#xA;" OwnerUserId="5046" LastActivityDate="2023-03-20T11:10:50.823" Title="Display fault 1440 x 900" Tags="|display|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30177" PostTypeId="1" CreationDate="2023-03-20T13:01:48.937" Score="0" ViewCount="38" Body="&lt;p&gt;(I've gone through the past posts and haven't found anyone who lists this same issue.)&lt;/p&gt;&#xA;&lt;p&gt;I have a mid-2010 iMAC still running OSX that I want to switch to Elementary OS for faster performance. I've downloaded Elementary OS, verified Checksum, created a boot drive on a memory stick, and when I restart computer with Option held down, I get options for : Macintosh HD, REcovery, EFI Boot, and EFI Boot. I've tried both the EFI Boot options and the screen goes black and the below error message flashes briefly, then the screen goes black again:&lt;/p&gt;&#xA;&lt;p&gt;[0.440561] uhci_hcd 0000:00:1a.0&amp;quot; Found HC with no IRQ. Check BIOS/PCI 0000:00:1a.0 setup!&#xA;[0.440576] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -19&#xA;and 2 more lines of similar errors.&lt;/p&gt;&#xA;&lt;p&gt;Any idea what is going on? I would think the computer is not compatible but I've verified it is 64Bit, etc.  Seems like multiple people have used similar era Macs.   Could use some help as would really like to use Elementary OS for this machine.&lt;/p&gt;&#xA;&lt;p&gt;More info:&lt;br /&gt;&#xA;I just tried installing Ubantu.  It did give an error but the boot menu came up with this installer.  When I chose the first option, it played music but was black screened.  I assumed that the monitor wasn't working.  So, second time I chose &amp;quot;Ubantu with Safe Graphics&amp;quot; and I saw the EXACT SAME &amp;quot;uhci-hcd&amp;quot; errors as with the Elementary OS install!!!  But then the launch menu came up.&lt;/p&gt;&#xA;&lt;p&gt;Does this indicate that it is something to do with with the integrated monitor on my computer?   Is there a way to simulate a &amp;quot;SAFE Graphics&amp;quot; launch with Elementary OS?&lt;/p&gt;&#xA;" OwnerUserId="31362" LastEditorUserId="31362" LastEditDate="2023-03-20T13:42:09.767" LastActivityDate="2023-03-20T13:42:09.767" Title="Installer fails to launch on Mid-2010 iMAC (27 inch) - error message, then black screen" Tags="|system-installation|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30178" PostTypeId="1" CreationDate="2023-03-21T01:36:17.850" Score="0" ViewCount="36" Body="&lt;p&gt;I have now installed a number of uncurated apps from the AppCenter, but upon trying to open or save files with them, I find myself looking at a flatpak &amp;quot;containerized&amp;quot; version of my /home/username directory with nothing in it (and files created there don't show up anywhere that I can find in my real home directory tree either, even in ~/.local, ~/.var etc.).&lt;/p&gt;&#xA;&lt;p&gt;This obviously doesn't happen with the curated apps that Elementary comes with, but I don't want it to happen with any AppCenter apps since most apps are plainly pretty useless if I can't access my own files while using them.&lt;/p&gt;&#xA;&lt;p&gt;Can someone please tell me what is going on and how I can stop this really bizarre behavior that I've only encountered since &amp;quot;upgrading&amp;quot; to Horus? Otherwise, I am very likely to give up on Elementary completely and just go with Ubuntu (and I doubt I'm the only one).&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-12-16T04:06:00.797" Title="many AppCenter apps cannot access my (real) home directory!" Tags="|appcenter|elementary-project|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30179" PostTypeId="2" ParentId="30178" CreationDate="2023-03-21T02:17:22.127" Score="0" Body="&lt;p&gt;I’ve generally used &lt;a href=&quot;https://flathub.org/apps/details/com.github.tchx84.Flatseal&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatseal&lt;/a&gt; to manage the permissions of Flatpak applications. It’s a pretty decent tool that will solve 99% of the issues that commonly affect containerized applications &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-03-21T02:17:22.127" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30180" PostTypeId="2" ParentId="30166" CreationDate="2023-03-21T13:34:19.177" Score="2" Body="&lt;p&gt;You could also use my fork of Lafydevs project:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://github.com/MvBonin/wingpanel-community-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/MvBonin/wingpanel-community-indicators&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is also up to date for elementary os 7.&lt;/p&gt;&#xA;&lt;p&gt;The difference is, that there is a ... Indicator with a submenu of indicators and you can choose, where you want Indicators to be shown.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/E7dxH.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E7dxH.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Its connected to &lt;a href=&quot;https://github.com/MvBonin/switchboard-plug-indicators&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/MvBonin/switchboard-plug-indicators&lt;/a&gt; that adds a page to your settings app.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/kOQEs.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/kOQEs.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;To install them, download the .dev files from my github repos and install them or follow the instructions on the github README.&lt;/p&gt;&#xA;" OwnerUserId="31366" LastActivityDate="2023-03-21T13:34:19.177" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30182" PostTypeId="1" CreationDate="2023-03-21T23:59:44.977" Score="0" ViewCount="166" Body="&lt;p&gt;Right now I can't launch any new flatpak applications, apparently because &lt;code&gt;df&lt;/code&gt; reports&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;tmpfs 1607908 1607908 0 100% /run/user/1000&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Things like &lt;code&gt;flatpak run org.libreoffice.LibreOffice&lt;/code&gt; also gives an error message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;error: Failed to write file&#xA;“/run/user/1000/.flatpak/3091774882/info.6QC311”: write() failed: No space left on device&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Does anyone know why this would be happening? I'll obviously try to reboot, but it's been less than 6 hours since I last rebooted!&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="25612" LastEditDate="2023-03-23T06:18:16.050" LastActivityDate="2023-03-23T06:18:16.050" Title="no space left on /run/user/1000" Tags="|filesystem|flatpak|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="30183" PostTypeId="2" ParentId="30143" CreationDate="2023-03-22T03:12:45.897" Score="1" Body="&lt;p&gt;Yes, it can. You will need to add a third-party repository first, though. Here's how you can do it:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open the terminal (if it's not already open)&lt;/li&gt;&#xA;&lt;li&gt;Add the &lt;code&gt;gezakovacs&lt;/code&gt; repository:&#xA;&lt;pre&gt;&lt;code&gt;sudo add-apt-repository ppa:gezakovacs/ppa&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Update &lt;code&gt;apt&lt;/code&gt; to retrieve the full list of packages and updates:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt-get update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Install &lt;code&gt;unetbootin&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt install unetbootin&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;That's all there is to it &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-03-22T03:12:45.897" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30184" PostTypeId="2" ParentId="30042" CreationDate="2023-03-22T03:33:26.267" Score="0" Body="&lt;p&gt;A quick search online will show a few dozen options spread across a number of sites, but the wallpapers that are included in Elementary OS are generally chosen to inspire people rather than self-promote.&lt;/p&gt;&#xA;&lt;p&gt;&lt;img src=&quot;https://i.stack.imgur.com/cMGhZ.jpg&quot; alt=&quot;Google Image Search Result&quot; /&gt;&lt;/p&gt;&#xA;&lt;p&gt;That said, if this is something that you feel strongly about, you are more than welcome to create some backgrounds and build a site that promotes them. With a little backing from the eOS community, some many even be chosen for future releases of the operating system &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-03-22T03:33:26.267" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30185" PostTypeId="5" CreationDate="2023-03-23T03:08:20.137" Score="0" Body="&lt;p&gt;Opera is a multi-platform web browser developed by its namesake company Opera. The browser is based on Chromium, but distinguishes itself from other Chromium-based browsers through its user interface and other features.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:08:20.137" LastActivityDate="2023-03-23T03:08:20.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30186" PostTypeId="4" CreationDate="2023-03-23T03:08:20.137" Score="0" Body="Use this tag for any questions about the Opera browser." OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:08:20.137" LastActivityDate="2023-03-23T03:08:20.137" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30187" PostTypeId="5" CreationDate="2023-03-23T03:12:25.597" Score="0" Body="&lt;p&gt;Ryzen is a brand of multi-core x86-64 microprocessors designed and marketed by AMD for desktop, mobile, server, and embedded platforms based on the Zen microarchitecture. It consists of central processing units for mainstream, enthusiast, server, and workstation segments as well as accelerated processing units marketed for mainstream, entry-level, and embedded systems applications.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:12:25.597" LastActivityDate="2023-03-23T03:12:25.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30188" PostTypeId="4" CreationDate="2023-03-23T03:12:25.597" Score="0" Body="For questions that are specific to computers powered by AMD's Ryzen processors." OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:12:25.597" LastActivityDate="2023-03-23T03:12:25.597" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30189" PostTypeId="5" CreationDate="2023-03-23T03:14:04.780" Score="0" Body="&lt;p&gt;Visual Studio Code, also commonly referred to as VS Code, is a source-code editor made by Microsoft with the Electron Framework, for Windows, Linux and macOS. Features include support for debugging, syntax highlighting, intelligent code completion, snippets, code refactoring, and embedded Git.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:14:04.780" LastActivityDate="2023-03-23T03:14:04.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30190" PostTypeId="4" CreationDate="2023-03-23T03:14:04.780" Score="0" Body="For questions related to installing and using VS Code." OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T03:14:04.780" LastActivityDate="2023-03-23T03:14:04.780" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30191" PostTypeId="1" CreationDate="2023-03-23T12:14:51.650" Score="0" ViewCount="44" Body="&lt;p&gt;I've looked at (and tried) several solutions in order to fix this problem, but unsuccessfully. Most of the issues I've read about have to do with older releases of eOS, so that some of the known [as yet] unsupported hardware would have been addressed in Horus (Ubuntu 20.04), but it appears that they have not. Following is a list of several outputs containing details about my configuration.&#xA;Thank you!&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;xy@eOS-ASRock-VisionX-420D:~$ lspci&#xA;00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)&#xA;00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)&#xA;00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)&#xA;00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)&#xA;00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 05)&#xA;00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)&#xA;00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)&#xA;00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)&#xA;00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)&#xA;00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)&#xA;00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)&#xA;00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)&#xA;00:1f.2 IDE interface: Intel Corporation 8 Series Chipset Family 4-port SATA Controller 1 [IDE mode] - Mobile (rev 05)&#xA;00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)&#xA;00:1f.5 IDE interface: Intel Corporation 8 Series/C220 Series Chipset Family 2-port SATA Controller 2 [IDE mode] (rev 05)&#xA;01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Venus XT [Radeon HD 8870M / R9 M270X/M370X]&#xA;01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000 Series]&#xA;03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4352 802.11ac Wireless Network Adapter (rev 03)&#xA;04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;xy@eOS-ASRock-VisionX-420D:~$ aplay -l&#xA;**** List of PLAYBACK Hardware Devices ****&#xA;card 0: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]&#xA;  Subdevices: 1/1&#xA;  Subdevice #0: subdevice #0&#xA;card 0: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]&#xA;  Subdevices: 0/1&#xA;  Subdevice #0: subdevice #0&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;xy@eOS-ASRock-VisionX-420D:~$ dmesg | grep -i snd&#xA;dmesg: read kernel buffer failed: Operation not permitted&#xA;xy@eOS-ASRock-VisionX-420D⍨$&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;pre&gt;&lt;code&gt;xy@eOS-ASRock-VisionX-420D:~$ inxi -Fxz&#xA;System:&#xA;  Kernel: 5.19.0-35-generic x86_64 bits: 64 compiler: N/A Desktop: Pantheon&#xA;    Distro: elementary OS 7 Horus&#xA;Machine:&#xA;  Type: Desktop Mobo: ASRock model: HM87-MXM serial: &amp;lt;superuser required&amp;gt;&#xA;    BIOS: American Megatrends v: P2.10 date: 11/26/2014&#xA;Battery:&#xA;  Device-1: apple_mfi_fastcharge model: N/A charge: N/A status: N/A&#xA;CPU:&#xA;  Info: dual core model: Intel Core i5-4200M bits: 64 type: MT MCP&#xA;    arch: Haswell rev: 3 cache: L1: 128 KiB L2: 512 KiB L3: 3 MiB&#xA;  Speed (MHz): avg: 3031 high: 3071 min/max: 800/3100 cores: 1: 3071&#xA;    2: 2998 3: 3056 4: 2999 bogomips: 19994&#xA;  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx&#xA;Graphics:&#xA;  Device-1: AMD Venus XT [Radeon HD 8870M / R9 M270X/M370X] driver: radeon&#xA;    v: kernel bus-ID: 01:00.0&#xA;  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: ati,radeon&#xA;    unloaded: fbdev,modesetting,vesa gpu: radeon resolution: 1680x1050~60Hz&#xA;  OpenGL: renderer: VERDE ( LLVM 15.0.6 DRM 2.50 5.19.0-35-generic)&#xA;    v: 4.5 Mesa 22.2.5 direct render: Yes&#xA;Audio:&#xA;  Device-1: Intel 8 Series/C220 Series High Definition Audio vendor: ASRock&#xA;    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0&#xA;  Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000&#xA;  Series]&#xA;    driver: snd_hda_intel v: kernel bus-ID: 01:00.1&#xA;  Sound Server-1: ALSA v: k5.19.0-35-generic running: yes&#xA;  Sound Server-2: PulseAudio v: 15.99.1 running: yes&#xA;  Sound Server-3: PipeWire v: 0.3.48 running: yes&#xA;Network:&#xA;  Device-1: Intel Ethernet I217-V vendor: ASRock driver: e1000e v: kernel&#xA;    port: f020 bus-ID: 00:19.0&#xA;  IF: enp0s25 state: down mac: &amp;lt;filter&amp;gt;&#xA;  Device-2: Broadcom BCM4352 802.11ac Wireless Network Adapter&#xA;    vendor: AzureWave driver: bcma-pci-bridge v: N/A bus-ID: 03:00.0&#xA;  IF-ID-1: enx82045f395f21 state: up speed: N/A duplex: N/A mac: &amp;lt;filter&amp;gt;&#xA;Bluetooth:&#xA;  Device-1: IMC Networks BCM20702A0 type: USB driver: btusb v: 0.8&#xA;    bus-ID: 3-14:4&#xA;  Report: hciconfig ID: hci0 rfk-id: 0 state: up address: &amp;lt;filter&amp;gt;&#xA;    bt-v: 2.1 lmp-v: 4.0&#xA;Drives:&#xA;  Local Storage: total: 5.84 TiB used: 10.8 GiB (0.2%)&#xA;  ID-1: /dev/sda vendor: Western Digital model: WD1600BEVT-75ZCT2&#xA;    size: 149.05 GiB&#xA;  ID-2: /dev/sdb vendor: Smart Modular Tech. model: SH00M256GB&#xA;    size: 238.47 GiB&#xA;  ID-3: /dev/sdc type: USB vendor: Innostor model: Ext. HDD size: 5.46 TiB&#xA;Partition:&#xA;  ID-1: / size: 228.72 GiB used: 10.53 GiB (4.6%) fs: ext4 dev: /dev/dm-0&#xA;    mapped: data-root&#xA;  ID-2: /boot size: 1.16 GiB used: 274.9 MiB (23.2%) fs: ext4&#xA;    dev: /dev/sdb1&#xA;Swap:&#xA;  ID-1: swap-1 type: partition size: 3.82 GiB used: 0 KiB (0.0%)&#xA;    dev: /dev/dm-2 mapped: cryptswap&#xA;Sensors:&#xA;  System Temperatures: cpu: 53.0 C mobo: 27.8 C gpu: radeon temp: 62.0 C&#xA;  Fan Speeds (RPM): N/A&#xA;Info:&#xA;  Processes: 289 Uptime: 3m Memory: 7.68 GiB used: 1.7 GiB (22.1%)&#xA;  Init: systemd runlevel: 5 Compilers: gcc: N/A Packages: 1637 Shell: Bash&#xA;  v: 5.1.16 inxi: 3.3.13&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="23742" LastEditorUserId="25612" LastEditDate="2023-03-23T12:22:32.773" LastActivityDate="2023-03-23T12:22:32.773" Title="HDMI sound output option not shown in Horus" Tags="|sound|hdmi|horus|" AnswerCount="0" CommentCount="5" ContentLicense="CC BY-SA 4.0" />
  <row Id="30192" PostTypeId="5" CreationDate="2023-03-23T12:29:08.047" Score="0" Body="&lt;p&gt;A privacy-focused, thoughtful, capable, and ethical replacement for just about any commercial operating system.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T12:29:08.047" LastActivityDate="2023-03-23T12:29:08.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30193" PostTypeId="4" CreationDate="2023-03-23T12:29:08.047" Score="0" Body="For questions related to elementary OS 7" OwnerUserId="25612" LastEditorUserId="25612" LastEditDate="2023-03-23T12:29:08.047" LastActivityDate="2023-03-23T12:29:08.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30195" PostTypeId="1" CreationDate="2023-03-25T10:42:10.290" Score="0" ViewCount="21" Body="&lt;p&gt;This is what my nav bar looks, I don't know what that turbo like icon is, but once I disconnect my power cable, the laptop shots off. Does anyone know of a fix to this please?&lt;/p&gt;&#xA;&lt;p&gt;Thank you.&lt;/p&gt;&#xA;&lt;p&gt;Here is the output of &lt;code&gt;upower -i /org/freedesktop/UPower/devices/battery_BAT0&lt;/code&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Jww0p.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Jww0p.png&quot; alt=&quot;output of code run on terminal&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here are the outputs from the updated command&#xA;&lt;a href=&quot;https://i.stack.imgur.com/7i7Za.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/7i7Za.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/KFc3i.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/KFc3i.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31372" LastEditorUserId="31372" LastEditDate="2023-04-03T08:28:54.480" LastActivityDate="2023-04-03T08:28:54.480" Title="Power issue on Hp 15" Tags="|battery|power|hp|" AnswerCount="0" CommentCount="8" ContentLicense="CC BY-SA 4.0" />
  <row Id="30196" PostTypeId="1" CreationDate="2023-03-25T12:20:44.033" Score="0" ViewCount="13" Body="&lt;p&gt;I tried to switch from libinput to synapatics by installing the latter using apt from the standard repository. It seemed to work ok at first, although the parameters settings were not working well on my Z990-R-AAS9U1 laptop. So I changed a few (FingerLow, FingerHigh, etc.), which seemed to help. But when I copied the synaptics default conf file from /usr/share/xorg.conf.d to /etc/X11/xorg.conf.d, added those options to it, and rebooted, gala didn't start up. Fortunately I could login to a shell and move 60-synaptics.conf out of /etc/X11/xorg.conf.d, and then I was able to get back to my usual desktop.&lt;/p&gt;&#xA;&lt;p&gt;Anyone have any ideas why this disaster happened? And how to fix it?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-03-25T12:20:44.033" Title="putting synaptics.conf into /etc/X11/xorg.conf.d made gala fail to start on boot" Tags="|system|touchpad|gala|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30197" PostTypeId="1" CreationDate="2023-03-25T20:41:18.943" Score="0" ViewCount="24" Body="&lt;p&gt;After removing the HDMI cable for my 2nd monitor (in elementary 7 Horus), every window is resized to the top half screen, even when maximizing them.&lt;/p&gt;&#xA;&lt;p&gt;Only by logging out this bug ends.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Display info&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;I use a Samsung 44&amp;quot; TV as a monitor, but it's detected as 85&amp;quot; (had the same issue in elementary 5)&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/xmYJF.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/xmYJF.png&quot; alt=&quot;built-in display&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/QakGA.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/QakGA.png&quot; alt=&quot;second monitor&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This is how it looks&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/YbAh6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YbAh6.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;&lt;a href=&quot;https://i.stack.imgur.com/8Hcqb.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/8Hcqb.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Hardware&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;~$ lscpu&#xA;Architecture:            x86_64&#xA;  CPU op-mode(s):        32-bit, 64-bit&#xA;  Address sizes:         39 bits physical, 48 bits virtual&#xA;  Byte Order:            Little Endian&#xA;CPU(s):                  4&#xA;  On-line CPU(s) list:   0-3&#xA;Vendor ID:               GenuineIntel&#xA;  Model name:            Intel(R) Core(TM) i3-6006U CPU @ 2.00GHz&#xA;    CPU family:          6&#xA;    Model:               78&#xA;    Thread(s) per core:  2&#xA;    Core(s) per socket:  2&#xA;    Socket(s):           1&#xA;    Stepping:            3&#xA;    CPU max MHz:         2000.0000&#xA;    CPU min MHz:         400.0000&#xA;    BogoMIPS:            3999.93&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="31373" LastEditorUserId="31373" LastEditDate="2023-03-26T12:41:49.077" LastActivityDate="2023-03-26T12:41:49.077" Title="Windows resized to top half screen after removing HDMI" Tags="|hdmi|monitors|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30198" PostTypeId="1" CreationDate="2023-03-27T16:23:17.950" Score="0" ViewCount="18" Body="&lt;p&gt;I just installed the latest two Horus updates using the AppCenter, and on rebooting found the System Settings / Keyboard option fo Caps Lock Behavior is not working (nothing happens no matter what it's set to). The other Keyboard options do seem to still work.&lt;/p&gt;&#xA;&lt;p&gt;Anyone else having this problem?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="25612" LastEditDate="2023-03-27T22:43:15.353" LastActivityDate="2023-03-27T22:43:15.353" Title="caps lock remapping not working in system settings after latest os update" Tags="|settings|keyboard|horus|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30199" PostTypeId="1" CreationDate="2023-03-28T19:02:42.853" Score="0" ViewCount="20" Body="&lt;p&gt;If I double-click on any desktop file in /usr/share/applications, it open the file in Code rather than launching the application the way it used to before I upgraded to Horus. Is there some way to fix this?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-03-28T19:02:42.853" Title="double clicking desktop file in Files does not launch application" Tags="|system|files|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30200" PostTypeId="2" ParentId="12910" CreationDate="2023-03-29T06:33:11.053" Score="0" Body="&lt;p&gt;&lt;kbd&gt;⌘&lt;/kbd&gt; + &lt;kbd&gt;Space&lt;/kbd&gt; will open the App Launcher on modern versions of elementary OS.&lt;/p&gt;&#xA;" OwnerUserId="31405" LastEditorUserId="25612" LastEditDate="2023-03-29T07:39:37.467" LastActivityDate="2023-03-29T07:39:37.467" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30202" PostTypeId="1" AcceptedAnswerId="30203" CreationDate="2023-03-29T17:00:43.903" Score="0" ViewCount="43" Body="&lt;p&gt;I'm upgrading to the next release of Elementary OS and want an easy way to restore all the applications I have installed. While there is a provision for restoring AppCenter purchases &lt;a href=&quot;https://github.com/elementary/appcenter/wiki/Saving-and-Restoring-Purchases&quot; rel=&quot;nofollow noreferrer&quot;&gt;documented here&lt;/a&gt;, I did not find anything in the &lt;a href=&quot;https://github.com/elementary/os/wiki/Release-Upgrades&quot; rel=&quot;nofollow noreferrer&quot;&gt;Elementary release upgrade guide&lt;/a&gt; dealing with free apps.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2023-04-03T15:12:51.713" Title="How can I backup and restore AppCenter apps between releases?" Tags="|updates|appcenter|flatpak|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30203" PostTypeId="2" ParentId="30202" CreationDate="2023-03-29T17:00:43.903" Score="0" Body="&lt;p&gt;Ryan M. in the Elementary OS slack community suggested using the 'flatpak list' console command, great idea.&lt;/p&gt;&#xA;&lt;p&gt;I searched online and found &lt;a href=&quot;https://www.reddit.com/r/linux/comments/u3wcm7/easy_flatpak_apps_backupinstallation/?rdt=59985&quot; rel=&quot;nofollow noreferrer&quot;&gt;this technique&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;p&gt;1 - Backup all your flatpak apps:&lt;/p&gt;&#xA;&lt;p&gt;flatpak list --columns=application --app &amp;gt; flatpaks.txt&#xA;Here you are saving all your installed apps to a text file, without the dependencies/runtimes (they are downloaded automatically anyways).&lt;/p&gt;&#xA;&lt;p&gt;2 - Install your apps in the new machine/installation:&lt;/p&gt;&#xA;&lt;p&gt;xargs flatpak install -y &amp;lt; flatpaks.txt&lt;/p&gt;&#xA;&lt;p&gt;Darshak P. from the slack also informs that &amp;quot;in case you have a separate /home partition, just reusing it in the new installation will keep all user flatpaks intact without you having to do anything.&amp;quot;&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2023-04-03T15:12:51.713" LastActivityDate="2023-04-03T15:12:51.713" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30207" PostTypeId="2" ParentId="29605" CreationDate="2023-04-06T10:18:35.710" Score="0" Body="&lt;p&gt;This issue can happen if one of the following conditions are met:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;there is insufficient storage space on the computer (e.g. the internal storage is not appearing to the installer)&lt;/li&gt;&#xA;&lt;li&gt;there is insufficient video memory allocated (only happens with some older Intel chips with integrated video)&lt;/li&gt;&#xA;&lt;li&gt;the installation media is &lt;em&gt;very&lt;/em&gt; slow (e.g. when trying to install with a USB 1.1 key)&lt;/li&gt;&#xA;&lt;li&gt;the video card is &amp;quot;too new&amp;quot; for the Linux kernel to handle&lt;/li&gt;&#xA;&lt;li&gt;the video card is too old/weak to render the UI&lt;/li&gt;&#xA;&lt;li&gt;the installation media is corrupted&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;The most common situation that I have seen is the last one. If possible, try to create the installation USB (or DVD) again to see if the problem persists.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-04-06T10:18:35.710" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30208" PostTypeId="1" CreationDate="2023-04-07T12:12:13.733" Score="0" ViewCount="20" Body="&lt;p&gt;I got the issue, that I don't get sound via Displayport working for me.&#xA;First of all the sounds work but not via Displayport.&#xA;So eg. with headphones it's working.&lt;/p&gt;&#xA;&lt;p&gt;Also there is noch Sound for DP or HDMI in settings.&#xA;Neither it is with pavucontrol.&lt;/p&gt;&#xA;&lt;p&gt;some help/ideas?&lt;/p&gt;&#xA;" OwnerUserId="31421" LastActivityDate="2023-04-07T12:12:13.733" Title="No Sound via Displayport [elementary OS 7 ; AMD GPU]" Tags="|updates|sound|amd|horus|eos7|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30209" PostTypeId="1" CreationDate="2023-04-09T16:24:39.400" Score="1" ViewCount="65" Body="&lt;p&gt;I upgraded to EOS 7 Horus yesterday (I did a fresh install, before I used 5.1 Hera, I think).&lt;/p&gt;&#xA;&lt;p&gt;My wifi connection worked out of the box, only to a certain wifi access point it will not connect. I checked dmesg and see this strange message:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;deauthenticating from xxx by local choice (Reason: 3=DEAUTH_LEAVING)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So it does connect (authenticated, associated), but then disconnects as if I clicked that in the GUI. The access point is old and Hera was an old OS, is it possible that Horus is too new and some kind of legacy protocol is missing? How can I debug that?&lt;/p&gt;&#xA;&lt;p&gt;Update:&lt;/p&gt;&#xA;&lt;p&gt;I tried to find out more about debugging wifi connections and managed to find this in journalctl:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;state change: ip-config -&amp;gt; failed (reason 'ip-config-unavailable', sys-iface-state: 'managed')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I noticed in this journalctl log a difference between the working network an the not-working access point: For both there is a record for IPv6. For working, it afterwards goes on to IPv4. For not-working, next message is fail. Maybe there's a problem with Horus preferring IPv6 and my old access point not understanding this?&lt;/p&gt;&#xA;&lt;p&gt;working:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Apr 09 20:26:52 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064812.7917] device (&amp;lt;wlan&amp;gt;): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network &amp;quot;&amp;lt;working&amp;gt;&amp;quot;&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064812.7919] device (&amp;lt;wlan&amp;gt;): state change: config -&amp;gt; ip-config (reason 'none', sys-iface-state: 'managed')&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064812.7933] dhcp4 (&amp;lt;wlan&amp;gt;): activation: beginning transaction (timeout in 45 seconds)&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: Joining mDNS multicast group on interface &amp;lt;wlan&amp;gt;.IPv6 with address &amp;lt;computer&amp;gt;.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: New relevant interface &amp;lt;wlan&amp;gt;.IPv6 for mDNS.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: Registering new address record for &amp;lt;address&amp;gt; on &amp;lt;wlan&amp;gt;.*.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064812.8618] dhcp4 (&amp;lt;wlan&amp;gt;): state changed new lease, address=192.168.0.20&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: Joining mDNS multicast group on interface &amp;lt;wlan&amp;gt;.IPv4 with address 192.168.0.20.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: New relevant interface &amp;lt;wlan&amp;gt;.IPv4 for mDNS.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; avahi-daemon[791]: Registering new address record for 192.168.0.20 on &amp;lt;wlan&amp;gt;.IPv4.&#xA;Apr 09 20:26:52 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064812.8631] device (&amp;lt;wlan&amp;gt;): state change: ip-config -&amp;gt; ip-check (reason 'none', sys-iface-state: 'managed')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;not-working:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Apr 09 20:26:17 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064777.8237] device (&amp;lt;wlan&amp;gt;): Activation: (wifi) Stage 2 of 5 (Device Configure) successful. Connected to wireless network &amp;quot;&amp;lt;not-working&amp;gt;&amp;quot;&#xA;Apr 09 20:26:17 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064777.8239] device (&amp;lt;wlan&amp;gt;): state change: config -&amp;gt; ip-config (reason 'none', sys-iface-state: 'managed')&#xA;Apr 09 20:26:17 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064777.8244] dhcp4 (&amp;lt;wlan&amp;gt;): activation: beginning transaction (timeout in 45 seconds)&#xA;Apr 09 20:26:17 &amp;lt;computer&amp;gt; avahi-daemon[791]: Joining mDNS multicast group on interface &amp;lt;wlan&amp;gt;.IPv6 with address &amp;lt;address&amp;gt;.&#xA;Apr 09 20:26:17 &amp;lt;computer&amp;gt; avahi-daemon[791]: New relevant interface &amp;lt;wlan&amp;gt;.IPv6 for mDNS.&#xA;Apr 09 20:26:17 &amp;lt;computer&amp;gt; avahi-daemon[791]: Registering new address record for &amp;lt;address&amp;gt; on &amp;lt;wlan&amp;gt;.*.&#xA;Apr 09 20:26:18 &amp;lt;computer&amp;gt; wpa_supplicant[831]: &amp;lt;wlan&amp;gt;: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-49 noise=9999 txrate=14400&#xA;Apr 09 20:26:19 &amp;lt;computer&amp;gt; gala[1582]: clutter_animatable_get_actor: assertion 'CLUTTER_IS_ANIMATABLE (animatable)' failed&#xA;Apr 09 20:26:19 &amp;lt;computer&amp;gt; gala[1582]: clutter_animatable_get_actor: assertion 'CLUTTER_IS_ANIMATABLE (animatable)' failed&#xA;Apr 09 20:26:30 &amp;lt;computer&amp;gt; systemd[1]: NetworkManager-dispatcher.service: Deactivated successfully.&#xA;Apr 09 20:26:49 &amp;lt;computer&amp;gt; NetworkManager[794]: &amp;lt;info&amp;gt;  [1681064809.7166] device (&amp;lt;wlan&amp;gt;): state change: ip-config -&amp;gt; failed (reason 'ip-config-unavailable', sys-iface-state: 'managed')&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;UPDATE:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;  *-network                 &#xA;       Beschreibung: Ethernet interface&#xA;       Produkt: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller&#xA;       Hersteller: Realtek Semiconductor Co., Ltd.&#xA;       [...]&#xA;       Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.19.0-38-generic firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=twisted pair&#xA;       Ressourcen: irq:18 ioport:d000(Größe=256) memory:d0004000-d0004fff memory:d0000000-d0003fff&#xA;  *-network&#xA;       Beschreibung: Kabellose Verbindung&#xA;       [...]&#xA;       Fähigkeiten: ethernet physical wireless&#xA;       Konfiguration: broadcast=yes driver=rt2800usb driverversion=5.19.0-38-generic firmware=0.36 ip=192.168.0.20 link=yes multicast=yes wireless=IEEE 802.11&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Maybe I should add that this is a USB device. This is from lsusb -v:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;ID 2001:3c15 D-Link Corp. DWA-140 RangeBooster N Adapter(rev.B3) [Ralink RT5372]&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;So it seems like I don't need a Realtek, but a Ralink driver. Like &lt;a href=&quot;https://wiki.debian.org/rt2800usb&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;UPDATE August 2023:&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;This problem is still not solved although the OS is now months old and there were many updates. I am still looking for help with this.&lt;/p&gt;&#xA;" OwnerUserId="2653" LastEditorUserId="2653" LastEditDate="2023-08-05T09:11:53.650" LastActivityDate="2023-08-05T09:11:53.650" Title="Connection to certain wifi keeps dropping (deauthenticating from xxx by local choice (Reason: 3=DEAUTH_LEAVING))" Tags="|wifi|horus|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30210" PostTypeId="1" CreationDate="2023-04-09T18:49:17.893" Score="0" ViewCount="22" Body="&lt;p&gt;I'll have to test by booting an older live CD to confirm, but I'm pretty sure my media keys stopped working after the 7x Horus upgrade.&lt;/p&gt;&#xA;&lt;p&gt;They are actived via Fn-key combination strokes such as Fn-F10 for mute, Fn-F11 lower volume and Fn-12 for increase volume. This is a pretty old Zareason laptop that is based on Pegatron B14Y hardware.&lt;/p&gt;&#xA;&lt;p&gt;If the 'showkey --keycodes' command in virtual terminal is to be believed, the Fn-F## keystrokes straight up aren't even recognized by the kernel. Naked Function key presses are, as are other Fn-F## keystrokes, such as Fn-F5 which is correctly interpreted as lower brightness key. So some Fn keystroke combos work, others don't. It seems to be limited to all the Fn media keystroke combos. This includes start/pause, stop, skip track fwd and backwards.&lt;/p&gt;&#xA;&lt;p&gt;Most solutions I've found online have to do with updating the BIOS but that ain't going to happen with this device.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastEditorUserId="4185" LastEditDate="2023-04-09T18:59:35.803" LastActivityDate="2023-04-09T18:59:35.803" Title="Media keys stopped working after 7x upgrade" Tags="|keyboard-shortcuts|horus|multimedia|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30212" PostTypeId="1" CreationDate="2023-04-14T14:16:53.370" Score="1" ViewCount="15" Body="&lt;p&gt;my goal is to automate some tests for a web app and in parallel do some other staff manually (like writing code locally or research or writing reports) and don't collide with it. I used softwares like Ginger, Power Automate Desktop but i'm not able to do anything else until the automation is done otherwise it's interrupted. The RPA works as if it is me. It takes control of the computer it's running on.&#xA;I was thinking of moving on cloud automation by using Azure or AWS in order to run the automation initiating from my device and in parallel to do other staff.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Tried&lt;/strong&gt;: Ginger, Power Automate Desktop but i'm not able to do anything else until the automation is done otherwise it's interrupted. The RPA works as if it is me. It takes control of the computer it's running on.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Expectation&lt;/strong&gt;: automation of tests AND do other staff without colliding on same device with the result to do as much work as possible.&lt;/p&gt;&#xA;" OwnerUserId="8412" LastEditorUserId="-1" LastEditDate="2023-04-21T11:53:52.943" LastActivityDate="2023-04-21T11:53:52.943" Title="Can I run Cloud Automation (azure/aws) for web apps in background and performing other tasks?" Tags="|testing|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30213" PostTypeId="1" CreationDate="2023-04-17T08:19:28.363" Score="0" ViewCount="21" Body="&lt;p&gt;In Ubuntu/Debian based distributions it has always been possible to allow the use of &amp;quot;.&amp;quot; in usernames by modifying the &lt;code&gt;NAME_REGEX&lt;/code&gt; field in &lt;code&gt;/etc/adduser.conf&lt;/code&gt;.  The value that I have always found that works is:&lt;/p&gt;&#xA;&lt;p&gt;&lt;code&gt;NAME_REGEX=&amp;quot;^[a-z][-a-z0-9_.]*$?$&amp;quot;&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I have tried this in elementary OS v7 and it allows me to create a user with a &amp;quot;.&amp;quot; in their username using &lt;code&gt;adduser&lt;/code&gt; but the UI doesn't recognise the new user.  If I try to add a user using the GUI User Accounts tool it rejects a username with a &amp;quot;.&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;It is a while since I used it but I recall this used to work correctly in v6.1. Is the GUI tool using a different configuration file to describe what characters are permitted in a username?&lt;/p&gt;&#xA;&lt;p&gt;-Andy.&lt;/p&gt;&#xA;" OwnerUserId="31439" LastActivityDate="2024-01-13T03:05:20.550" Title="Unable to add &quot;.&quot; to username" Tags="|user|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30214" PostTypeId="2" ParentId="30213" CreationDate="2023-04-18T00:35:26.517" Score="0" Body="&lt;p&gt;To the best of my knowledge, this cannot be changed in elementary OS 7+ as periods in names can result in the following issues:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;scripts that use &lt;code&gt;chown&lt;/code&gt; can malfunction due to a 20+ year old issue where a period can be used in place of a colon when assigning ownerships&lt;br&gt;&lt;sup&gt;&lt;em&gt;How long does a &amp;quot;legacy&amp;quot; decision need to be supported?&lt;/em&gt; ‍&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;some &lt;code&gt;systemd&lt;/code&gt; operations that are expected to run as a user may run under &lt;code&gt;root&lt;/code&gt; instead if the username contains a period&lt;br&gt;&lt;sup&gt;&lt;em&gt;This seems like more of a critical bug than something that should be used to justify a naming convention.&lt;/em&gt;&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Doing a quick scan of the various configuration files used by elementary OS does not reveal a regex or character list that may be used for user names, which leads me to believe it's built into the UI itself. Any change to the UI code would be eliminated the next time an update from the OS team is rolled out &lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-04-18T00:35:26.517" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30215" PostTypeId="1" CreationDate="2023-04-19T15:17:23.367" Score="0" ViewCount="57" Body="&lt;p&gt;everytime i try to boot in, lockscreen appears, then i put the password and it just displays a black screen, sometimes with sound (when i press volume + or -). So far the only way i can succesfully use Elementary OS is adding &amp;quot;nomodeset&amp;quot; in the grub everytime i'm login in, it's the only way it works normally, in fact thats the way i managed to configure the system, but it gets annoying really fast, so i'm looking for a fix&lt;/p&gt;&#xA;&lt;p&gt;I'm using EOS 7, in a HP x2 210 g2 tablet/laptop&#xA;2gb of ram&#xA;32gb emmc&#xA;Intel atom x5-z8350&lt;/p&gt;&#xA;" OwnerUserId="31445" LastActivityDate="2023-04-19T15:17:23.367" Title="Black screen when boot" Tags="|horus|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30216" PostTypeId="1" CreationDate="2023-04-22T13:35:14.273" Score="0" ViewCount="59" Body="&lt;p&gt;Thunderbird's all-important &amp;quot;Quick Filter&amp;quot; tab has stopped working under recent updates to Horus (i.e. it used to work just fine under Horus). More specifically, clicking on the &amp;quot;Quick Filter&amp;quot; tab just causes it to turn grey, but the search bar does not appear underneath it, and so it cannot be used.&lt;/p&gt;&#xA;&lt;p&gt;Although Thunderbird is an unsupported app, this sudden loss of functionality is almost certainly due to one of the many recent improvements to Elementary's &amp;quot;gala&amp;quot; window manager. It is therefore likely that it affects other programs as well.&lt;/p&gt;&#xA;&lt;p&gt;I've tried both the flatpak and apt repository versions (both of which are 102.10.0), and it makes no difference. So I hope someone at Elementary will look into it (it's probably just a refresh problem of some kind, perhaps in Thunderbird's css style sheet, but that's beyond my paygrade).&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2024-01-17T15:00:55.103" Title="thunderbird's &quot;quick filter&quot; has stopped working on Horus" Tags="|gala|thunderbird|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30217" PostTypeId="2" ParentId="30216" CreationDate="2023-04-22T13:43:28.510" Score="0" Body="&lt;p&gt;I have now found that when thunderbird is started in &amp;quot;Troubleshoot&amp;quot; mode, the &amp;quot;Quick Filters&amp;quot; search bar does appear as it should, BUT nothing happens when text is typed into it, so it's still useless (curiously, the &amp;quot;Unread&amp;quot;, &amp;quot;Starred&amp;quot; etc. filter buttons do work, however).&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-04-22T13:43:28.510" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30218" PostTypeId="1" AcceptedAnswerId="30219" CreationDate="2023-05-01T19:05:11.577" Score="1" ViewCount="191" Body="&lt;p&gt;I am experiencing a problem with one repository not having a release file.  For that reason, I would like to remove it, but I can't find the Software and Updates app in the OS to select and remove the repo in the GUI.  How can I remove it in Elementary OS 7?&lt;/p&gt;&#xA;" OwnerUserId="31469" LastActivityDate="2023-05-02T02:54:30.780" Title="How can I remove a repositry in Elementary OS 7?" Tags="|software-installation|horus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30219" PostTypeId="2" ParentId="30218" CreationDate="2023-05-02T02:54:30.780" Score="1" Body="&lt;p&gt;The Software and Updates app does not (to the best of my knowledge) allow a person to work with the sources list directly in Horus. That said, you can take care of this via the Terminal. Here's how:&lt;/p&gt;&#xA;&lt;ol start=&quot;0&quot;&gt;&#xA;&lt;li&gt;Open the Terminal application&lt;/li&gt;&#xA;&lt;li&gt;Change to the directory containing &lt;code&gt;apt&lt;/code&gt;'s &lt;code&gt;sources.list&lt;/code&gt; file:&#xA;&lt;pre&gt;&lt;code&gt;cd /etc/apt&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;Edit the &lt;code&gt;sources.list&lt;/code&gt; file to remove (or comment out) the repository that does not have a release file:&#xA;&lt;pre&gt;&lt;code&gt;sudo {editor of choice} sources.list &#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;sup&gt;&lt;strong&gt;Note:&lt;/strong&gt; Be sure to replace &lt;code&gt;{editor of choice}&lt;/code&gt; with your preferred text editor.&lt;/sup&gt;&lt;/li&gt;&#xA;&lt;li&gt;Find the repo that needs to be removed and add a &lt;code&gt;#&lt;/code&gt; to the start of the line, or remove it completely.&lt;/li&gt;&#xA;&lt;li&gt;Save the file and exit&lt;/li&gt;&#xA;&lt;li&gt;Update &lt;code&gt;apt&lt;/code&gt;:&#xA;&lt;pre&gt;&lt;code&gt;sudo apt update&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;If the repository that you need to remove is not found in &lt;code&gt;sources.list&lt;/code&gt;, then it will be contained in a file within the &lt;code&gt;/etc/apt/sources.list.d&lt;/code&gt; directory, possibly in its own definition file.&lt;/p&gt;&#xA;" OwnerUserId="25612" LastActivityDate="2023-05-02T02:54:30.780" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30220" PostTypeId="2" ParentId="15685" CreationDate="2023-05-05T21:58:03.693" Score="1" Body="&lt;p&gt;I know it's been quite a while, but..&#xA;Put the command you want it into the ~/.bashrc file.&lt;/p&gt;&#xA;" OwnerUserId="31478" LastActivityDate="2023-05-05T21:58:03.693" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30221" PostTypeId="1" CreationDate="2023-05-06T22:02:51.903" Score="0" ViewCount="58" Body="&lt;p&gt;When booting into elementary OS 7 Horus (with disk encryption) on my laptop normally, the disk unlock screen is displayed. After entering my decryption key, it loads into tty7, where it briefly flashes a grey screen with a cursor, before the screen appears to go black (the backlight is still on).&lt;/p&gt;&#xA;&lt;p&gt;Then this phenomenon occurs: only the (sharpest?) colours on the screen are shown, and everything else appears black.&lt;/p&gt;&#xA;&lt;p&gt;Photos (in order) of the login screen, desktop, and desktop with app launcher open are attached below.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/f8VT6.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/f8VT6.jpg&quot; alt=&quot;The login screen; desktop; and desktop with app launcher&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;This issue does not occur in recovery mode, however it appears to resume after the laptop is suspended and then reopened.&lt;/p&gt;&#xA;&lt;p&gt;For reference, this is a picture of the laptop in recovery mode, specifically in the third scenario, with the app launcher open on the desktop:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/52nx9.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/52nx9.jpg&quot; alt=&quot;App launcher and desktop displayed correctly&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;The following snippet is the output of &lt;code&gt;/var/log/syslog&lt;/code&gt;. The screen started displaying incorrectly around 01:35:44.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;May 20 01:35:40 oskars-laptop systemd[1]: Started Hostname Service.&#xA;May 20 01:35:42 oskars-laptop dbus-daemon[1130]: [session uid=115 pid=1130] Activating via systemd: service name='ca.desrt.dconf' unit='dconf.service' requested by ':1.13' (uid=115 pid=1188 comm=&amp;quot;io.elementary.wingpanel -g &amp;quot; label=&amp;quot;unconfined&amp;quot;)&#xA;May 20 01:35:42 oskars-laptop systemd[1107]: Starting User preferences database...&#xA;May 20 01:35:42 oskars-laptop dbus-daemon[1130]: [session uid=115 pid=1130] Successfully activated service 'ca.desrt.dconf'&#xA;May 20 01:35:42 oskars-laptop systemd[1107]: Started User preferences database.&#xA;May 20 01:35:43 oskars-laptop bluetoothd[740]: src/adv_monitor.c:btd_adv_monitor_power_down() Unexpected NULL btd_adv_monitor_manager object upon power down&#xA;May 20 01:35:57 oskars-laptop systemd[1]: Created slice User Slice of UID 1000.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Additional information:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;CPU: Intel Pentium N3710&lt;/li&gt;&#xA;&lt;li&gt;Memory: 4GB&lt;/li&gt;&#xA;&lt;li&gt;Kernel version: Linux 5.15.0-58-generic&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="31419" LastEditorUserId="31419" LastEditDate="2023-05-20T00:46:59.027" LastActivityDate="2023-05-20T00:46:59.027" Title="How I make my laptop running elementary OS display normally, rather than only a few shades of colours?" Tags="|display|laptop|horus|eos7|" AnswerCount="0" CommentCount="6" ContentLicense="CC BY-SA 4.0" />
  <row Id="30222" PostTypeId="2" ParentId="30149" CreationDate="2023-05-09T11:58:49.900" Score="1" Body="&lt;p&gt;I am using elementaryOS 7 and found the file to change at this location:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/usr/share/applications/viber.desktop&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;The line should be:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Exec=env QT_STYLE_OVERRIDE=&amp;quot;&amp;quot; /opt/viber/Viber %u&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="31493" LastEditorUserId="25612" LastEditDate="2023-05-10T02:30:00.670" LastActivityDate="2023-05-10T02:30:00.670" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30224" PostTypeId="1" AcceptedAnswerId="30225" CreationDate="2023-05-12T15:05:01.950" Score="1" ViewCount="441" Body="&lt;p&gt;I have an &lt;strong&gt;Mx Keys&lt;/strong&gt; keyboard with a &lt;em&gt;Mac &amp;amp; Windows&lt;/em&gt; layout which I wanted to connect to my &lt;strong&gt;Dell XPS&lt;/strong&gt; &lt;em&gt;9650&lt;/em&gt; running &lt;strong&gt;Elementary OS&lt;/strong&gt; &lt;em&gt;7 Horus&lt;/em&gt;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;First&lt;/strong&gt;, I had trouble connecting it to my computer.&#xA;The step by step solution was :&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Hold the pairing button of the keyboard ( A button resembling &lt;strong&gt;&lt;code&gt;1C⌑&lt;/code&gt;&lt;/strong&gt;, &lt;strong&gt;&lt;code&gt;2C⌑&lt;/code&gt;&lt;/strong&gt; or &lt;strong&gt;&lt;code&gt;3C⌑&lt;/code&gt;&lt;/strong&gt; )&lt;/li&gt;&#xA;&lt;li&gt;Click on the &lt;strong&gt;&lt;code&gt;Connect&lt;/code&gt;&lt;/strong&gt; button at the far right&lt;/li&gt;&#xA;&lt;li&gt;Type in the digits shown in the displayed window&lt;/li&gt;&#xA;&lt;li&gt;&lt;strong&gt;Press &lt;code&gt;Enter&lt;/code&gt;&lt;/strong&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;&lt;strong&gt;Then&lt;/strong&gt; however, many special functions behind the functions keys weren't working. One example was both of the monitor brightness buttons.&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&lt;strong&gt;How do I fix the special function keys actions ?&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;" OwnerUserId="31498" LastEditorUserId="31498" LastEditDate="2023-05-13T18:09:28.113" LastActivityDate="2023-11-23T15:24:27.790" Title="How do I configure my Logitech Keyboard / Mouse?" Tags="|keyboard-shortcuts|keyboard|bluetooth|mouse|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30225" PostTypeId="2" ParentId="30224" CreationDate="2023-05-12T15:08:35.180" Score="2" Body="&lt;p&gt;I found a solution using &lt;a href=&quot;https://github.com/pwr-Solaar/Solaar&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;Solaar&lt;/code&gt;&lt;/a&gt;.&#xA;It is a Linux manager for many Logitech devices&lt;/p&gt;&#xA;&lt;p&gt;The installation documentation can be found &lt;a href=&quot;https://github.com/pwr-Solaar/Solaar/blob/master/docs/installation.md&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;here&lt;/strong&gt;&lt;/a&gt;.&#xA;I personnally chose to use pip to install the latest release of Solaar.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;pip install --user solaar&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After the installation process is complete, make sure you copied the udev rules as indicated in the documentation.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# user udev rules&#xA;sudo cp ~/.local/share/solaar/udev-rules.d/42-logitech-unify-permissions.rules /usr/lib/udev/rules.d/&#xA;&#xA;# system udev rules&#xA;sudo cp ~/.local/share/solaar/udev-rules.d/42-logitech-unify-permissions.rules /etc/udev/rules.d/&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You might have to disconnect your devices for Solaar to recognise them.&#xA;&lt;em&gt;If you run Solaar and you haven't disconnected / reconnected your devices, the Logitech devices manager will probably tell you to do so&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;However, the special function keys were still not working !&lt;/p&gt;&#xA;&lt;p&gt;I found &lt;strong&gt;two ways&lt;/strong&gt; to mitigate this :&lt;/p&gt;&#xA;&lt;h3&gt;Solution 1 : Key/Button Diversion&lt;/h3&gt;&#xA;&lt;p&gt;( my personal preference )&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open Solaar&lt;/li&gt;&#xA;&lt;li&gt;Click on your keyboard in the list of devices&lt;/li&gt;&#xA;&lt;li&gt;Unlock the &lt;code&gt;Key/Button Diversion&lt;/code&gt; setting ( press the padlock twice )&lt;/li&gt;&#xA;&lt;li&gt;Divert all key/button(s) you wish to redefine.&#xA;Here is a list of those :&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;Brightness Down, Brightness Up, Mission Control/Task View, Calculator&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Edit rules to redefine the keys above&#xA;To make it easier, here are the rules I used to configure those keys:&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.config/solaar/rules.yaml&#xA;%YAML 1.3&#xA;---&#xA;- Key: [Mission Control/Task View, pressed]&#xA;- Execute: [/usr/bin/dbus-send, --session, --dest=org.pantheon.gala, --print-reply,&#xA;    /org/pantheon/gala, org.pantheon.gala.PerformAction, 'int32:1']&#xA;...&#xA;---&#xA;- Key: [Calculator, pressed]&#xA;- Execute: [/usr/bin/flatpak, run, io.elementary.calculator]&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;&lt;em&gt;Note that the brightness up and down keys are configured by default by Solaar, thus not showing up in the snippet above.&lt;/em&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here is a link to my &lt;a href=&quot;https://github.com/alexandre-eliot/elementary-os-solaar-mx-keys-config&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;strong&gt;Solaar configuration&lt;/strong&gt;&lt;/a&gt; that you can fetch if you want to bother with the diversion and configuration step :&#xA;&lt;a href=&quot;https://github.com/alexandre-eliot/elementary-os-solaar-mx-keys-config&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/alexandre-eliot/elementary-os-solaar-mx-keys-config&lt;/a&gt;&lt;/p&gt;&#xA;&lt;h3&gt;Solution 2 : &lt;code&gt;Set OS&lt;/code&gt; as &lt;code&gt;Mac OS&lt;/code&gt;&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Open Solaar&lt;/li&gt;&#xA;&lt;li&gt;Click on your keyboard in the list of devices&lt;/li&gt;&#xA;&lt;li&gt;Unlock the &lt;code&gt;Set OS&lt;/code&gt; setting ( press the padlock twice )&lt;/li&gt;&#xA;&lt;li&gt;Select &lt;code&gt;Mac OS&lt;/code&gt; in the list&lt;/li&gt;&#xA;&lt;li&gt;Press the padlock again to lock it again&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Note that, after this step, some keys may differ from the printed characters of your keyboard.&#xA;For me the &lt;code&gt;[@#|²~]&lt;/code&gt; key was swapped with the &lt;code&gt;&amp;gt; &amp;lt;&lt;/code&gt; key.&lt;/p&gt;&#xA;&lt;p&gt;Also, you will have use the &lt;code&gt;opt|ctrl&lt;/code&gt; key instead of the &lt;code&gt;⌘cmd|alt(gr)&lt;/code&gt; to trigger the encircled symbols.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;Bonus&lt;/strong&gt;:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;p&gt;You may want to run Solaar on Start-Up. The procedure to do so can be found &lt;a href=&quot;https://pwr-solaar.github.io/Solaar/installation#running-solaar-at-startup&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Solaar will allow you to define actions linked to key presses and other events.&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="31498" LastEditorUserId="31498" LastEditDate="2023-11-23T15:24:27.790" LastActivityDate="2023-11-23T15:24:27.790" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30226" PostTypeId="1" CreationDate="2023-05-19T22:20:02.670" Score="0" ViewCount="52" Body="&lt;p&gt;Installed successfully Elementary OS on Panasonic Toughbook FZ 55. Managed to get nearly all hardware configured and working, including bluetooth which I had troubles with on other distributions.&lt;/p&gt;&#xA;&lt;p&gt;I'm having an issue with getting audio from speakers however. If I plug in headphones, I get audio. I tried several things:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;installed &amp;quot;pavucontrol&amp;quot; for Pulse Audio&lt;/li&gt;&#xA;&lt;li&gt;tried settings (saw 3 HDMI audio outputs, unsure where to set the order or priorities)&lt;/li&gt;&#xA;&lt;li&gt;tried &amp;quot;alsamixer&amp;quot; from command line to select audio cards&lt;/li&gt;&#xA;&lt;li&gt;tried setting audio output card when using VLC&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Linux audio is tricky and I feel that I am missing something very simple yet can't figure it out.&lt;/p&gt;&#xA;" OwnerUserId="31513" LastActivityDate="2023-05-19T22:20:02.670" Title="No audio from Panasonic Toughbook FZ-55 MK2" Tags="|audio|alsa|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30228" PostTypeId="1" CreationDate="2023-05-20T14:20:59.980" Score="0" ViewCount="59" Body="&lt;p&gt;Elementary OS wont start in Hyper-V even when Secure Boot is disabled. It gives out an error &lt;code&gt;error: out of memory.&lt;/code&gt; And will not start. I just want to try it out in a VM to see what it's like. Don't want to do it on real hardware.&lt;/p&gt;&#xA;" OwnerUserId="31517" LastActivityDate="2023-05-20T14:20:59.980" Title="Elementary OS wont start in Hyper-V even when Secure Boot is disabled" Tags="|boot|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30230" PostTypeId="1" CreationDate="2023-05-23T00:11:25.683" Score="0" ViewCount="22" Body="&lt;p&gt;It's been a while, and I think I need some guidance if anyone can offer it. For the past few days i've tried to update my operating system, and I get this message:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;&amp;quot;Failed to update Operating System updates This may have been caused&#xA;by external or manually compiled software.&lt;/p&gt;&#xA;&lt;p&gt;E: dpkg was interrupted, you must manually run 'dpkg --configure -a'&#xA;to correct the problem.&amp;quot;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;Not sure what is going on here. I have done updates to the OS with no problem recently, so I'm not sure what's holding up this particular update.&lt;/p&gt;&#xA;&lt;p&gt;One more thing: I keep getting notifications from a website that I've not subscribed to or read. The site is called Patheos. I'm not sure where to look to stop these notifications. Any advice for this as well? I'm using Firefox if that helps or means anything. Never had notifications pop up before. All of a sudden I'm getting notifications from this site. I think there may be something in Firefox that needs to be changed, but I don't seem to be able to find it.&lt;/p&gt;&#xA;" OwnerUserId="6129" LastEditorUserId="9445" LastEditDate="2023-05-23T06:57:31.410" LastActivityDate="2023-05-23T06:57:31.410" Title="Can't update OS" Tags="|release-jolnir|update-manager|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30234" PostTypeId="1" CreationDate="2023-05-25T03:28:48.903" Score="0" ViewCount="23" Body="&lt;p&gt;okay so i am actually using endeavour os BUT since i use pantheon de i was hoping/praying someone on the elementary forum maybe able to help me. my issue is regarding wingpanel. it is no longer transparent or whatever... it is just 100 percent transparent now but not able to show any dynamic transparency.&#xA;i added this to my gtk.css (Dracula theme) per someones suggestion on another site but it didn’t work:&lt;/p&gt;&#xA;&lt;p&gt;/*********************&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;wingpanel support *&#xA;********************/&#xA;.panel {&#xA;background-color: transparent;&#xA;transition: all 100ms ease-in-out;&#xA;}&#xA;.panel.maximized {&#xA;background-color: #000;&#xA;}&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;i also messed around in dconf editor with no luck.&#xA;i tried creating a new account but still no luck.&#xA;i have no idea what to do. i figured since pantheon de is obviously rooted here in elementary you guys having more expertise than me on this might be able to help. i am hoping so because this to be honest really sucks. thankx in advance for ANY help what so ever.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Ixw8b.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Ixw8b.jpg&quot; alt=&quot;what it looks like now&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3j9Hh.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3j9Hh.jpg&quot; alt=&quot;what it used to look like (the correct look)&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31541" LastActivityDate="2023-05-25T03:28:48.903" Title="wingpanel lost it's dynamic transparency" Tags="|wingpanel|pantheon|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30235" PostTypeId="1" CreationDate="2023-05-26T14:44:54.070" Score="0" ViewCount="23" Body="&lt;p&gt;I've been wondering this for a while, those last Ubuntu LTS are really buggy, last night I tried to use the last LTS and it didn't last 10min without breaking alone, just by updating the system. I am asking this as a total noob in this field.&lt;/p&gt;&#xA;&lt;p&gt;Linux Mint looks like the most stable distro we have right now(ubuntu based), that said, why eOS is still based on Ubuntu? Is it hard/impossible to be based on some distro like Linux Mint?&lt;/p&gt;&#xA;&lt;p&gt;I saw a lot of users complaining about eOS bugs and unstability. I had some myself, but as I am a developer I am always breaking something, rs. But it isn't those bugs Ubuntu's fault?&lt;/p&gt;&#xA;" OwnerUserId="31547" LastActivityDate="2023-05-26T14:44:54.070" Title="Why eOS is still based on Ubuntu and not on Linux Mint?" Tags="|kernel|ubuntu|elementary-project|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30236" PostTypeId="1" CreationDate="2023-05-26T15:44:26.183" Score="0" ViewCount="10" Body="&lt;p&gt;I want to start/help to translate eOS Desktop to espanhol/spanish (ES), I registry myself at l10n.elementary but couldn't create a project myself.&lt;/p&gt;&#xA;&lt;p&gt;Is this site still used to translate something in the eOS project?&lt;/p&gt;&#xA;" OwnerUserId="31547" LastActivityDate="2023-05-26T15:44:26.183" Title="How to start a new translation project?" Tags="|elementary-project|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30237" PostTypeId="1" AcceptedAnswerId="30238" CreationDate="2023-05-30T04:46:46.553" Score="1" ViewCount="191" Body="&lt;p&gt;I installed elementary OS 7 on my laptop 2 days ago. In the beginning everything was working well, but today my Wifi simply stopped working. I can see no available connections in the network list and although I'm able to connect to the internet through a wired connection, I cannot create a hotspot on my computer. I'm not shown any error when I turn the hotspot on, but it doesn't show up as an available connection to other devices in the vicinity. Running &lt;code&gt;dmesg&lt;/code&gt; shows the following error messages which I believe are related:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[  107.750470] rtw_8822be 0000:07:00.0: failed to read ASPM, ret=-5&#xA;[  109.749418] rtw_8822be 0000:07:00.0: failed to poll offset=0x5 mask=0x2 value=0x0&#xA;[  109.749434] rtw_8822be 0000:07:00.0: mac power on failed&#xA;[  109.749436] rtw_8822be 0000:07:00.0: failed to power on mac&#xA;[  109.749438] rtw_8822be 0000:07:00.0: leave idle state failed&#xA;[  109.749624] rtw_8822be 0000:07:00.0: failed to leave ips state&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Running &lt;code&gt;lspci&lt;/code&gt; reveals this to be my wifi card: &lt;code&gt;Network controller: Realtek Semiconductor Co., Ltd. RTL8822BE 802.11a/b/g/n/ac WiFi adapter&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any help on solving this issue is much appreciated. Thanks in advance.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;Update: After following Vlad's suggestions, some of the error messages disappeared, namely the ones related to ASPM, but I see the following new ones now:&lt;/em&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    6.568678] rtw_8822be 0000:07:00.0: Unable to change power state from D3cold to D0, device inaccessible&#xA;[    6.575083] rtw_8822be 0000:07:00.0: failed to setup chip efuse info&#xA;[    6.575114] rtw_8822be 0000:07:00.0: failed to setup chip information&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="31554" LastEditorUserId="31554" LastEditDate="2023-06-01T04:08:22.793" LastActivityDate="2023-06-01T04:08:22.793" Title="Issues with Realtek Wifi Card" Tags="|wifi|networking|drivers|internet|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30238" PostTypeId="2" ParentId="30237" CreationDate="2023-05-30T07:25:24.353" Score="2" Body="&lt;p&gt;I have the same adapter, and I had to install driver from &lt;a href=&quot;https://github.com/lwfinger/rtw88&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/lwfinger/rtw88&lt;/a&gt; to make it work:&lt;/p&gt;&#xA;&lt;p&gt;Install dependencies:&lt;br /&gt;&#xA;&lt;code&gt;sudo apt-get update&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo apt-get install make gcc linux-headers-$(uname -r) build-essential git&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Clone the repo:&lt;br /&gt;&#xA;&lt;code&gt;git clone https://github.com/lwfinger/rtw88.git&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;Build and install driver:&lt;br /&gt;&#xA;&lt;code&gt;cd rtw88&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;make&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo make install&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo reboot&lt;/code&gt;&lt;/p&gt;&#xA;&lt;p&gt;I now have 99% consistent WiFi connection, even between resumes &amp;amp; restarts.&lt;/p&gt;&#xA;&lt;p&gt;OBSERVATIONS:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;&lt;p&gt;You'll need to install the driver after every kernel update, so keep the cloned folder at hand.&lt;br /&gt;&#xA;&lt;code&gt;cd ~/rtw88&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;git pull&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;make&lt;/code&gt;&lt;br /&gt;&#xA;&lt;code&gt;sudo make install&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;Sometimes, after a restart, WiFi will be off, trying &lt;code&gt;sudo rfkill unblock all&lt;/code&gt; might work, or turn off laptop, remove power supply, wait a minute or two, power on laptop. Inside the repo folder there's a suspend  script, might want to try it if you have serious issues with dead WiFi after suspend &lt;code&gt;sudo cp suspend_rtw8822be /usr/lib/systemd/system-sleep/&lt;/code&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;p&gt;You may also need to turn aspm off after installing the driver:&lt;br /&gt;&#xA;&lt;code&gt;sudo nano /etc/modprobe.d/r8822be.conf&lt;/code&gt;&lt;br /&gt;&#xA;inside this file paste &lt;code&gt;options r8822be aspm=0&lt;/code&gt;&lt;br /&gt;&#xA;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;O&lt;/kbd&gt; to save file&lt;br /&gt;&#xA;&lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;X&lt;/kbd&gt; to close nano&lt;br /&gt;&#xA;reboot&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="9445" LastEditorUserId="9445" LastEditDate="2023-05-30T14:34:31.397" LastActivityDate="2023-05-30T14:34:31.397" CommentCount="11" ContentLicense="CC BY-SA 4.0" />
  <row Id="30239" PostTypeId="1" CreationDate="2023-06-04T09:22:54.920" Score="0" ViewCount="9" Body="&lt;p&gt;When reinstalling Elementary os 7 Horus all files from connected drives appear locked , I can open new downloaded files but can never delete them .&#xA;Does anyone know what the cause of this is because these are not even old files on the drive but new ones , I have to delete them each time under windows . :-(&lt;/p&gt;&#xA;" OwnerUserId="20660" LastActivityDate="2023-06-04T09:22:54.920" Title="Files locked when reinstalling under OS 7 Horus" Tags="|files|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30240" PostTypeId="1" CreationDate="2023-06-06T14:51:45.670" Score="1" ViewCount="343" Body="&lt;p&gt;I recently experimented with various GTK themes using Tweaks on my elementary OS laptop. Since then, I've been encountering an issue with Microsoft Edge where it fails to retain its theme correctly. I am currently using the WhiteSur-Dark GTK theme. Upon launching Edge, it consistently starts in light mode, despite having dark mode selected in its Settings. To switch back to dark mode, I need to click on the light mode option and then click on dark mode again. However, upon closing the browser, it reverts to light mode again. Interestingly, the system title bar remains in dark mode throughout.&lt;/p&gt;&#xA;&lt;p&gt;To resolve this issue, I initially attempted a workaround. I copied the GTK theme files to &lt;code&gt;~/local/share/themes/&amp;lt;theme-name&amp;gt;/gtk-3.0&lt;/code&gt; (Where Elementary Tweaks says to keep all the themes. Previously I was keeping them in &lt;code&gt;home/.themes&lt;/code&gt; and it showed up in Tweaks anyways), and then changed the theme in Tweaks to a different one from official Elementary themes. Afterward, I set the theme back to Whitesur-Dark, and this successfully restored Edge's dark mode functionality. However, after restarting my system, the problem resurfaced, and repeating the same copy-and-revert process no longer works. Being new to the Linux world, I have limited knowledge about how deeply GTK theming can affect other applications.&lt;/p&gt;&#xA;&lt;p&gt;I've tried to install other Microsoft Edge version to see if it persists and surely did. Microsoft Edge Dev also shows the same behaiviour. I tried to launch the browser from terminal with force dark mode parameters and it does nothing. I have reported it to Microsoft Edge but it seems something to do with GTK or how theming works in Elementary at all. Because even after using that Whitesur-Dark theme Dark mode is a hit and miss across apps, even in System apps. For example Mail, Calender, Photos all supports it but Music, Calculator is still in light mode. I was not bothered by it that much but having my daily driver browser in constant Light mode and being overriden by some unkown (to me) parameter somewhere in the system theming is a deal breaker now. Here's Edge after launch:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Vc2KB.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Vc2KB.png&quot; alt=&quot;Edge at launch where theme choice is dark mode but it is in light mode&quot; /&gt;&lt;/a&gt;&#xA;Notice how the browser theme is selected in Dark but it is exhibiting light mode.&lt;/p&gt;&#xA;&lt;p&gt;and here's the expected behaviour:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/nrwzt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/nrwzt.png&quot; alt=&quot;Edge in dark mode and theme choice is also in dark mode&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Version Info:&lt;br /&gt;&#xA;Microsoft Edge Version: 114.0.1823.37 (Official build) (64-bit)&lt;br /&gt;&#xA;elementary OS 7 Horus&lt;br /&gt;&#xA;Linux 5.19.0-43-generic&lt;/p&gt;&#xA;&lt;p&gt;I would greatly appreciate any guidance or insights into this issue. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="31570" LastEditorUserId="31570" LastEditDate="2023-06-06T15:32:14.120" LastActivityDate="2023-06-06T15:32:14.120" Title="Edge not retaining theme settings properly after GTK theme experimentation" Tags="|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30242" PostTypeId="2" ParentId="29871" CreationDate="2023-06-16T02:26:30.290" Score="1" Body="&lt;p&gt;Through some trial and error I was able to connect to the proton bridge using elementary OS' native mail app.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Sign up for a proton.me account&lt;/li&gt;&#xA;&lt;li&gt;Download the Proton/Protonmail bridge and sign in&lt;/li&gt;&#xA;&lt;li&gt;Open Proton Bridge and go to Settings -&amp;gt; Advanced settings&lt;/li&gt;&#xA;&lt;li&gt;Click &amp;quot;Export TLS certificates&amp;quot; and save them somewhere (I did documents)&lt;/li&gt;&#xA;&lt;li&gt;Copy the exported cert.pem into your certificates folder &lt;code&gt;sudo cp cert.pem /usr/local/share/ca-certificates/certificate.crt&lt;/code&gt;&lt;/li&gt;&#xA;&lt;li&gt;Resync certificates with &lt;code&gt;sudo update-ca-certificates&lt;/code&gt;&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;The output should be similar to&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;Updating certificates in /etc/ssl/certs...&#xA;rehash: warning: skipping ca-certificates.crt,it does not contain exactly one certificate or CRL&#xA;1 added, 0 removed; done.&#xA;Running hooks in /etc/ca-certificates/update.d...&#xA;&#xA;Adding debian:certificate.pem&#xA;done.&#xA;done.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;After this you should be able to connect to your proton bridge as expected with username/password/STARTLS.&lt;/p&gt;&#xA;" OwnerUserId="31585" LastEditorUserId="31585" LastEditDate="2023-06-17T13:54:08.053" LastActivityDate="2023-06-17T13:54:08.053" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30243" PostTypeId="2" ParentId="570" CreationDate="2023-06-25T22:06:18.517" Score="0" Body="&lt;p&gt;Depending on your workflow, you may be able to get by with just a sidebar bookmark:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;connect to the remote system the first time with Files&lt;/li&gt;&#xA;&lt;li&gt;click-and-drag the mounted network volume from &amp;quot;Network&amp;quot; up to &amp;quot;Bookmarks&amp;quot;&lt;/li&gt;&#xA;&lt;li&gt;then, next time you log in, click on that bookmark to reconnect the remote volume.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The downside is it won't be accessible from other applications (&lt;em&gt;e.g.&lt;/em&gt;, LibreOffice) until after you open Files for the first time and click the bookmark.&lt;/p&gt;&#xA;&lt;hr /&gt;&#xA;&lt;p&gt;If the remote volume &lt;em&gt;must&lt;/em&gt; be mounted at login, an alternative is to create an autostart desktop entry that uses &lt;code&gt;gvfs-mount&lt;/code&gt; (for Freya) or &lt;code&gt;gio mount&lt;/code&gt; in newer elementary OS releases. Hypothetically, this method could work for other kinds of volumes, too, provided your user has appropriate permissions to mount them.&lt;/p&gt;&#xA;&lt;p&gt;Since you refer to connecting to the SSH server with Pantheon Files, I assume you mean &amp;quot;mount on login&amp;quot; rather than &amp;quot;mount on boot&amp;quot; (which implies that the network filesystem would be mounted independent of the graphical desktop).&lt;/p&gt;&#xA;&lt;p&gt;If you're OK with mounting on &lt;em&gt;login&lt;/em&gt;, either:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;connect to the server with the Files app the first time and allow it to store the password in your login keyring&lt;/li&gt;&#xA;&lt;li&gt;—or— use &lt;code&gt;ssh-copy-id&lt;/code&gt; to copy your SSH public key to the remote system such that you can &lt;code&gt;ssh thehostname&lt;/code&gt; without having to give a password&#xA;&lt;ul&gt;&#xA;&lt;li&gt;if you don't have a &lt;code&gt;~/.ssh/id_SOMETHING.pub&lt;/code&gt; already, use &lt;code&gt;ssh-keygen&lt;/code&gt; to create one; be sure to specify a password for the private key (which the desktop environment should offer to store for you the first time you use it)&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Then add &lt;code&gt;gvfs-mount sftp://username@hostname/path/to/dir&lt;/code&gt; (in newer releases, &lt;code&gt;gio mount&lt;/code&gt;) to your autostart config. You can either do this with &lt;em&gt;System Settings&lt;/em&gt; → &lt;em&gt;Applications&lt;/em&gt; → &lt;em&gt;Startup&lt;/em&gt;, or else create a &lt;a href=&quot;https://specifications.freedesktop.org/desktop-entry-spec/latest/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Desktop Entry&lt;/a&gt; file in &lt;code&gt;~/.config/autostart&lt;/code&gt; under your user account.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/yGR9h.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/yGR9h.png&quot; alt=&quot;Screenshot showing the method for adding a custom startup command in elementary OS Freya&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Here is the created file:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.config/autostart/custom-command0.desktop&#xA;# You can rename this file and/or edit 'Name' below to make it more descriptive&#xA;[Desktop Entry]&#xA;Name[en_US]=Custom Command&#xA;Comment[en_US]=gvfs-mount sftp://username@hostname/path&#xA;Exec=gvfs-mount sftp://username@hostname/path&#xA;Icon=application-default-icon&#xA;X-GNOME-Autostart-enabled=true&#xA;Type=Application&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;If you create an appropriate &lt;a href=&quot;https://manpages.ubuntu.com/manpages/focal/en/man5/ssh_config.5.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;~/.ssh/config&lt;/code&gt; entry&lt;/a&gt; for &lt;code&gt;hostname&lt;/code&gt;, you can specify the username, key file, or any other necessary SSH options, without needing to hard-code those into the autostart desktop entry.&lt;/p&gt;&#xA;&lt;p&gt;Hypothetically, you could place the &lt;code&gt;.desktop&lt;/code&gt; file in &lt;code&gt;/etc/xdg/autostart&lt;/code&gt; instead (as root) and have it run on login for all users. You'd have to figure out how to solve the problem of specifying the remote username, though, if it differs from the local one. I don't think Desktop Entry files understand environment variables.&lt;/p&gt;&#xA;&lt;h2&gt;Editorial&lt;/h2&gt;&#xA;&lt;p&gt;Re-mounting a network volume when you log in &lt;em&gt;seems&lt;/em&gt; like something that Files itself should support, but &lt;a href=&quot;https://bugs.launchpad.net/pantheon-files/+bug/1094669&quot; rel=&quot;nofollow noreferrer&quot;&gt;the only issue I'm aware of&lt;/a&gt; where this was brought up was closed as WONTFIX. I guess that's OK, because this is a pain on all &lt;em&gt;three&lt;/em&gt; major operating systems, Windows being the possible exception, since the &amp;quot;Map Network Drive&amp;quot; dialog has &lt;a href=&quot;https://www.tenforums.com/network-sharing/65161-any-proven-way-reconnect-mapp-drives-wakeup-startup-restart.html#post846822&quot; rel=&quot;nofollow noreferrer&quot;&gt;a &amp;quot;Reconnect at sign-in&amp;quot; checkbox&lt;/a&gt; that works most of the time.&lt;/p&gt;&#xA;&lt;p&gt;One serious downside of using &lt;code&gt;gvfs-mount&lt;/code&gt; / &lt;code&gt;gio mount&lt;/code&gt; is the weird filesystem path where network volumes get mounted. On Ubuntu-derived systems, it's something like:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;/run/user/YOURUID/gvfs/proto:host=hostname,user=username/path&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;You could make symlinks in &lt;code&gt;~/net&lt;/code&gt; or something, but that's a pain to maintain if you connect to a lot of different hosts.&lt;/p&gt;&#xA;&lt;p&gt;Then there's the fact that non-GTK apps don't always understand GVFS/GIO mounts or show them as removable devices, forcing you to browse to that weird path. Drag-and-drop from the file manager to these apps often doesn't work. There's probably no clear fix for that.&lt;/p&gt;&#xA;&lt;p&gt;As an aside, I think this is something OS X got right, and maybe NeXTSTEP before it: all mounted volumes &lt;em&gt;including&lt;/em&gt; network volumes are under &lt;code&gt;/Volumes&lt;/code&gt;, with simple names. But I just don't see how that could work in a multi-user environment on Linux.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2023-06-26T00:26:49.037" LastActivityDate="2023-06-26T00:26:49.037" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30244" PostTypeId="1" CreationDate="2023-06-28T09:24:18.217" Score="0" ViewCount="18" Body="&lt;p&gt;As  mentioned in the title, can't make sleep command to work in an executable script.sh with an io.elementary.terminal command is there something i'm missing?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/bin/sh&#xA;io.elementary.terminal -n -e &amp;quot;sleep 3s &amp;amp;&amp;amp; ls&amp;quot;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;returns:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sleep: invalid time interval ‘&amp;amp;&amp;amp;’&#xA;sleep: invalid time interval ‘ls’&#xA;Try 'sleep --help' for more information.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="14577" LastActivityDate="2023-06-28T09:24:18.217" Title="can't make &quot;sleep&quot; command to run in executable script.sh using &quot;io.elementary.terminal&quot; command" Tags="|pantheon-terminal|command-line|script|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30245" PostTypeId="1" CreationDate="2023-06-29T04:14:08.083" Score="0" ViewCount="27" Body="&lt;p&gt;i'm fairly new to Linux, so if there's any information i'm missing then please be patient with me!&lt;/p&gt;&#xA;&lt;p&gt;for reference, here are my hardware specifications:&#xA;&lt;a href=&quot;https://pastebin.com/RTV0WRVg&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://pastebin.com/RTV0WRVg&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;a fresh install of elementaryOS gives me the common bug of the display being tinted (in my case, my primary was green and secondary was red). after searching through support forums on Reddit and elsewhere, i determined that it may have been an issue with NVIDIA drivers. at this point, i was able to connect to wifi, so i attempted to both manually install NVIDIA drivers through terminal, as well as attempt the gnome-control-center solution. installation was EXTREMELY slow and continuously froze despite having run &lt;code&gt;sudo apt-get update&lt;/code&gt;, so i ended up having to bin those ideas. i've test-driven multiple different distros and haven't had problems with apt-get like i have in eOS.&lt;/p&gt;&#xA;&lt;p&gt;i then decided to run &lt;code&gt;sudo ubuntu-drivers autoinstall&lt;/code&gt; to see if that could fetch the drivers i needed. this kept spitting an error that i was able to fix by following this guide: &lt;a href=&quot;https://askubuntu.com/questions/1435715/sudo-ubuntu-drivers-autoinstall-unboundlocalerror-local-variable-version-ref&quot;&gt;https://askubuntu.com/questions/1435715/sudo-ubuntu-drivers-autoinstall-unboundlocalerror-local-variable-version-ref&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;once installation seemed to be progressing, i left my computer for about an hour since installation was still slow (capping at 500kb/s), but it never froze and ended up completing successfully.&lt;/p&gt;&#xA;&lt;p&gt;i restarted my computer and noticed that color was restored, however my resolution was locked at 1024x768, my second monitor was receiving no signal, and my wifi connection and settings vanished. a couple guides suggested i try to boot into an older version of the Linux kernal through GRUB, but that would land me in a version of eOS without a GUI.&lt;/p&gt;&#xA;&lt;p&gt;i've only experienced issues like this with eOS despite having used multiple distros on the same hardware, so i'm at a complete loss. i do not have access to ethernet, so if it's possible to fix my installation offline or through a fresh install, that would be the best course of action.&lt;/p&gt;&#xA;" OwnerUserId="31613" LastActivityDate="2023-06-29T04:14:08.083" Title="having a myriad of driver-related issues (graphics, internet, etc.)" Tags="|wifi|drivers|graphic-drivers|nvidia|apt|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30246" PostTypeId="1" CreationDate="2023-07-01T13:02:07.200" Score="0" ViewCount="33" Body="&lt;p&gt;So I have to ask the question.&lt;/p&gt;&#xA;&lt;p&gt;More often than not lately, EOS is wanting to restart the system after applying updates from the app center.&lt;/p&gt;&#xA;&lt;p&gt;That's seems very un-Linux-ish to me.&lt;/p&gt;&#xA;&lt;p&gt;Why is this happening?&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-07-01T13:02:07.200" Title="Restart after updating?" Tags="|elementary-project|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30247" PostTypeId="1" CreationDate="2023-07-04T14:05:04.413" Score="0" ViewCount="27" Body="&lt;p&gt;I am getting this long update error:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;the following packages have unmet dependencies:&#xA;linux-modules-nvidia-510-5.15.0-58-generic:&#xA;depends:nvidia-kernel-common-510[&amp;lt;=&#xA;510.108.03-1] but525.125.06-0ubuntu0.20.04-1&#xA;is to be installed&#xA;linux-modules-nvidia-510.15.0-57-generic:&#xA;depends:nvidia510-5.15.0-57-generic:&#xA;depends:nvidia-kernel-common-510[&amp;lt;=&#xA;510.108.03-1] but 525.125.0-56-generic:&#xA;depends:nvidia-kernel-common-510[&amp;lt;=&#xA;510.108.03-1] but 52.125,06-0ubuntu0,20,04.1&#xA;is to be installed&#xA;linux-modules-nvidia510-5.15.0-60-generic:&#xA;depends:nvidiaa-kernel-common-510[&amp;lt;=&#xA;510.108.03-1] but 525.125.06-0ubuntu0.20,04,1&#xA;is to be installed.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;All help is appreciated.&lt;/p&gt;&#xA;" OwnerUserId="31635" LastEditorUserId="25612" LastEditDate="2023-07-06T13:57:28.773" LastActivityDate="2023-07-06T13:57:28.773" Title="unable to update packages /dependencies" Tags="|updates|kernel|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30248" PostTypeId="2" ParentId="29357" CreationDate="2023-07-19T18:58:07.263" Score="1" Body="&lt;p&gt;I solved a similar problem by using Darkbar, which &lt;a href=&quot;https://appcenter.elementary.io/com.github.bluesabre.darkbar/&quot; rel=&quot;nofollow noreferrer&quot;&gt;can be found in the AppCenter&lt;/a&gt;. The source code can also be found &lt;a href=&quot;https://github.com/bluesabre/darkbar&quot; rel=&quot;nofollow noreferrer&quot;&gt;on GitHub&lt;/a&gt;.&lt;/p&gt;&#xA;" OwnerUserId="31676" LastEditorUserId="25612" LastEditDate="2023-07-21T00:21:24.603" LastActivityDate="2023-07-21T00:21:24.603" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30249" PostTypeId="1" CreationDate="2023-07-23T11:34:53.990" Score="1" ViewCount="90" Body="&lt;p&gt;I am struggling with setting up LUKS Volumes with encryption for Elementary OS 7 Horus.&lt;/p&gt;&#xA;&lt;p&gt;I am using this tutorial: &lt;a href=&quot;https://www.mikekasberg.com/blog/2020/04/08/dual-boot-ubuntu-and-windows-with-encryption.html&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://www.mikekasberg.com/blog/2020/04/08/dual-boot-ubuntu-and-windows-with-encryption.html&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately Elementary OS installer does not support LUKS volumes.  I cannot use any of LUKS volumes/partition I have created.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pP2D7.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pP2D7.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;So the question is: How Can I install Elementary os with the LUKS volumes? Or in other words: How I can set up Disk encryption on Elementary OS (installed along with dual boot with Windows 10)?&lt;/p&gt;&#xA;" OwnerUserId="19187" LastActivityDate="2023-07-23T11:34:53.990" Title="Elementary OS 7 Horus - LUKS Volumes support (disk encryption)" Tags="|encryption|horus|disk|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30250" PostTypeId="2" ParentId="4095" CreationDate="2023-07-25T12:51:40.700" Score="0" Body="&lt;p&gt;Works fine - but only for the current song. An music player (music, audacious) stops after the current song finished. Once the lock is removed, these apps continue playing further songs. Any further help (except not using a screen locker)?&#xA;Before I ran eOS 5.1 Hera and I can't remember having this problems.&lt;/p&gt;&#xA;" OwnerUserId="18096" LastActivityDate="2023-07-25T12:51:40.700" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30251" PostTypeId="1" CreationDate="2023-07-26T12:35:41.630" Score="0" ViewCount="34" Body="&lt;p&gt;Title sums it all up.&lt;/p&gt;&#xA;&lt;p&gt;How do I remove &amp;quot;Code&amp;quot; from Elementary.&lt;/p&gt;&#xA;&lt;p&gt;Thus far I've been stymied.&lt;/p&gt;&#xA;&lt;p&gt;Working on Horus.&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&lt;p&gt;chris&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-12-23T17:02:00.240" Title="How to remove &quot;Code&quot; from EOS?" Tags="|software-installation|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30252" PostTypeId="1" CreationDate="2023-07-26T15:26:36.157" Score="0" ViewCount="36" Body="&lt;p&gt;Curious what's going on here.&lt;/p&gt;&#xA;&lt;p&gt;&lt;em&gt;&lt;strong&gt;EVERY&lt;/strong&gt;&lt;/em&gt; time I do an update from the Daemon, Horus demands to be restarted.&lt;/p&gt;&#xA;&lt;p&gt;Is it channeling it's inner Windows?&lt;/p&gt;&#xA;&lt;p&gt;This seems &lt;strong&gt;VERY&lt;/strong&gt; un-Linux like.&lt;/p&gt;&#xA;&lt;p&gt;Any thoughts?&lt;/p&gt;&#xA;&lt;p&gt;And why isn't there a release-horus tag?&lt;/p&gt;&#xA;&lt;p&gt;And why in the world can I only post every 40 minutes?&lt;/p&gt;&#xA;&lt;p&gt;So many questions, so little time....&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-07-26T15:26:36.157" Title="Why is Horus demanding to be rebooted EVERY time I do an update?" Tags="|updates|" AnswerCount="0" CommentCount="4" ContentLicense="CC BY-SA 4.0" />
  <row Id="30253" PostTypeId="2" ParentId="30251" CreationDate="2023-07-26T15:50:10.843" Score="0" Body="&lt;p&gt;sudo apt remove io.elementary.code&lt;/p&gt;&#xA;&lt;p&gt;Bug report submitted.&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-07-26T15:50:10.843" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30254" PostTypeId="1" CreationDate="2023-07-28T07:25:32.157" Score="0" ViewCount="8" Body="&lt;p&gt;In &lt;code&gt;System Settings&lt;/code&gt; &amp;gt; &lt;code&gt;Desktop&lt;/code&gt; &amp;gt; &lt;code&gt;Appearance&lt;/code&gt;, I have it set to switch to the dark style between sunset and sunrise. Normally, it works as expected. However, within the past few days it has stopped working.&lt;/p&gt;&#xA;&lt;p&gt;All my software is up-to-date. Has there been a recent update to anything that would affect this?&lt;/p&gt;&#xA;&lt;p&gt;I know sometimes resetting preferences by deleting config files can help. Is there anything I should try resetting?&lt;/p&gt;&#xA;" OwnerUserId="26780" LastActivityDate="2023-07-28T07:25:32.157" Title="&quot;Dark mode&quot; recently stopped working for me. How can I fix it?" Tags="|settings|desktop|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30255" PostTypeId="2" ParentId="38" CreationDate="2023-07-28T11:07:44.830" Score="0" Body="&lt;p&gt;In eOS 7.0 (Horus) the name of the key has changed from single-click to singleclick-select:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;gsettings set io.elementary.files.preferences singleclick-select false&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="18096" LastActivityDate="2023-07-28T11:07:44.830" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30256" PostTypeId="1" CreationDate="2023-07-29T05:58:19.523" Score="0" ViewCount="67" Body="&lt;p&gt;I'm on Elementary OS 7 (Horus). The last few days the default Task app (io.elementary.tasks) keeps opening/starting on startup. If I remove is from the startup applications (in settings -&amp;gt; applications), it re-appears on next boot.&lt;/p&gt;&#xA;&lt;p&gt;Today I tried to uninstall, but I can't using the AppCenter (it keeps being in an installed state). I don't mind the app being there as long as it doesn't bother me. And since I don't use it, it bothers me by starting and showing up after I log in.&lt;/p&gt;&#xA;&lt;p&gt;Right now I just renamed the executable:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mv /usr/bin/io.elementary.tasks /usr/bin/io.elementary.taskz&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;But is there a better way of removing the app on startup or uninstalling? That this happens is probably a bug, I guess.&lt;/p&gt;&#xA;&lt;p&gt;Thanks!&lt;/p&gt;&#xA;" OwnerUserId="31696" LastActivityDate="2023-07-29T06:05:31.003" Title="Tasks app keeps starting on login" Tags="|appcenter|default|horus|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30257" PostTypeId="2" ParentId="30256" CreationDate="2023-07-29T06:05:31.003" Score="1" Body="&lt;p&gt;You can also check these two folders as they contain autostart items:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;~/.config/autostart&lt;/li&gt;&#xA;&lt;li&gt;/etc/xdg/autostart&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;If you find &lt;code&gt;io.elementary.tasks.desktop&lt;/code&gt; file there either rename it or delete it.&lt;/p&gt;&#xA;" OwnerUserId="31345" LastActivityDate="2023-07-29T06:05:31.003" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30258" PostTypeId="2" ParentId="29892" CreationDate="2023-07-29T14:54:23.787" Score="0" Body="&lt;p&gt;I've never been able to install Horus on my Dell Inspiron 7434 laptop. It burps with some obscure text and refuses to continue.  I've tried a myriad of ways to no avail.  Posted questions on all the various EOS sites with no response.&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-07-29T14:54:23.787" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30259" PostTypeId="2" ParentId="17876" CreationDate="2023-07-30T07:19:03.167" Score="0" Body="&lt;p&gt;I have an easier solution to the problem, if you have 64GB on the drive (EMMC one), u just need 2 USBs and 1 external hard drive for the solution and the steps are:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;create a bootable USB with Live ubuntu on it so u could boot into the try option.&lt;/li&gt;&#xA;&lt;li&gt;connect the other USB stick (preferably to have 16GB - 64GB) and install the ubuntu on that stick.&lt;/li&gt;&#xA;&lt;li&gt;boot from the live again, and just create an image disk from that 16-64GB USB that u just installed onto and save it onto the external Hard drive.&lt;/li&gt;&#xA;&lt;li&gt;take both the hard drive (where u have the image of the installed USB 16-64GB) and the USB of the live boot and boot from the live one, then connect the hard drive and use the &amp;quot;restore image&amp;quot; option onto the EMMC drive, it will write the efi file system with the grub too onto the EMMC thus skipping the part where ubuntu itself tries to install the grub into the &amp;quot;SD Reader&amp;quot; (just make sure that u made it in GPT and not MBR since it works best on GPT and the acer spin also can boot from the UEFI option).&lt;/li&gt;&#xA;&lt;li&gt;power off the PC after the operation is complete and disconnect all other devices and let it boot from the EMMC.&lt;/li&gt;&#xA;&lt;li&gt;have fun.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;if u got any other questions please feel free to contact me in discord: rmeir#2983&#xA;I come onto this forum once in a very long while.&#xA;(my friend just came onto here with his own acer spin and I solved him the problem)&lt;/p&gt;&#xA;" OwnerUserId="31699" LastActivityDate="2023-07-30T07:19:03.167" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30260" PostTypeId="1" CreationDate="2023-08-07T08:55:04.247" Score="0" ViewCount="25" Body="&lt;p&gt;I have Elementary OS 6.1 (20.04.6 LTS) running in VMware Pro 17.0.2&lt;/p&gt;&#xA;&lt;p&gt;Files shows me a mount of '/media/username/elementary os' with no space left (used 2.7gb of 2.7gb). There is a file of 2.5gb '/media/username/elementary os/casper/filesyste,.squashfs'.&lt;/p&gt;&#xA;&lt;p&gt;What can I do about it?&lt;/p&gt;&#xA;" OwnerUserId="19216" LastActivityDate="2023-08-07T08:55:04.247" Title="Casper folder too full" Tags="|filesystem|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30262" PostTypeId="1" CreationDate="2023-08-08T01:10:52.930" Score="1" ViewCount="34" Body="&lt;p&gt;Using Terminal 6.1.2, everything up-to-date.&lt;/p&gt;&#xA;&lt;p&gt;I currently have the following in my &lt;code&gt;.bashrc&lt;/code&gt;, as suggested in &lt;a href=&quot;https://superuser.com/a/507679&quot;&gt;this answer&lt;/a&gt;:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;case &amp;quot;$TERM&amp;quot; in&#xA;xterm*|rxvt*)&#xA;    PROMPT_COMMAND='echo -ne &amp;quot;\033]0;${USER}@${HOSTNAME}: ${PWD}\007&amp;quot;'&#xA;&#xA;    # Show the currently running command in the terminal title:&#xA;    # http://www.davidpashley.com/articles/xterm-titles-with-bash.html&#xA;    show_command_in_title_bar()&#xA;    {&#xA;        case &amp;quot;$BASH_COMMAND&amp;quot; in&#xA;            *\033]0*)&#xA;                # The command is trying to set the title bar as well;&#xA;                # this is most likely the execution of $PROMPT_COMMAND.&#xA;                # In any case nested escapes confuse the terminal, so don't&#xA;                # output them.&#xA;                ;;&#xA;            *)&#xA;                echo -ne &amp;quot;\033]0;${USER}@${HOSTNAME}: ${BASH_COMMAND}\007&amp;quot;&#xA;                ;;&#xA;        esac&#xA;    }&#xA;    trap show_command_in_title_bar DEBUG&#xA;    ;;&#xA;*)&#xA;    ;;&#xA;esac&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;It changes the &lt;em&gt;window&lt;/em&gt; title to the currently running process, which is great. However, it doesn't change the &lt;em&gt;tab&lt;/em&gt; title. So if I have multiple tabs open in the same directory, they all have the same title, and I can't immediately see which program is running in which tab.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to make this apply to the tab titles as well?&lt;/p&gt;&#xA;&lt;p&gt;Please let me know if there's a better forum for this; I'm not sure if it's an elementary Terminal thing, or a bash thing, or what.&lt;/p&gt;&#xA;" OwnerUserId="26780" LastActivityDate="2023-12-14T01:04:35.530" Title="Is there a way to make Terminal tab titles display the currently running command?" Tags="|pantheon-terminal|bash|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30263" PostTypeId="1" CreationDate="2023-08-11T19:01:49.830" Score="0" ViewCount="10" Body="&lt;p&gt;Firstly, I am running an Intel NUC 11 with an Intel &amp;quot;on-board&amp;quot; GPU and a discrete GPU nVidia RX 2060.&lt;/p&gt;&#xA;&lt;p&gt;I need to use the Intel for day to day, and the nVidia for gaming....can EOS 7 handle this (assuming correct nVidia and Intel drivers are installed) by allowing me to switch? I have read that some distros can &amp;quot;auto-sense&amp;quot; gaming and switch automatically, but that could just be &amp;quot;urban myth&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;Subsequent question to the above - do the available (if any) drivers for both actually work in EOS? I did have an earlier experience in trying EOS and after install, everything was green???&lt;/p&gt;&#xA;&lt;p&gt;Second question is how EOS handles LE Bluetooth devices...I have a Logitech MX Master 3 BT mouse which I am having a very difficult time in the current OS getting it to work, it doesn't. It's a minor thing but important nonetheless.&lt;/p&gt;&#xA;&lt;p&gt;Finally, how is EOS in gaming, in particular, running with Steam games?&lt;/p&gt;&#xA;&lt;p&gt;Thanks IA.&lt;/p&gt;&#xA;" OwnerUserId="31739" LastActivityDate="2023-08-11T19:01:49.830" Title="Considering a move back to EOS - a couple of questions" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30267" PostTypeId="1" CreationDate="2023-08-19T19:15:17.713" Score="0" ViewCount="43" Body="&lt;p&gt;Can someone direct me to where to get Broadcom kernel that is on the elementary OS 7 Horus iso? It's locked and I can't access it to install. The driver does work in &amp;quot;Trial boot,&amp;quot; but is not available after eos is installed and as I said can't be syphoned from the USB install stick as it's locked. I have tried several options through terminal to no avail.&lt;/p&gt;&#xA;" OwnerUserId="31763" LastActivityDate="2023-08-19T19:15:17.713" Title="Broadcom Macbook Pro 2010 elementary OS 7 Horus" Tags="|wifi|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30268" PostTypeId="1" CreationDate="2023-08-24T04:06:27.190" Score="0" ViewCount="12" Body="&lt;p&gt;I am having some troubles trying to install CH340 drivers for an Arduino Nano from the &lt;a href=&quot;https://support.arduino.cc/hc/en-us/articles/4412955149586-If-your-board-does-not-appear-on-a-port-in-Arduino-IDE&quot; rel=&quot;nofollow noreferrer&quot;&gt;Arduino official page&lt;/a&gt;.&#xA;Then I tryied following &lt;a href=&quot;https://learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all#linux&quot; rel=&quot;nofollow noreferrer&quot;&gt;this&lt;/a&gt; guide, but when I run &lt;code&gt;sudo chmod a+rw /dev/ttyUSB0&lt;/code&gt; I have the error: &lt;code&gt;chmod: cannot access '/dev/ttyUSB0': No such file or directory&lt;/code&gt; even though when I run&#xA;&lt;code&gt;sudo dmesg | grep ch34&lt;/code&gt; I can see the log &lt;code&gt;[466332.874357] usb 1-1: ch341-uart converter now attached to ttyUSB0 &lt;/code&gt; but after &lt;code&gt;ls /dev/ttyUSB*&lt;/code&gt; I can't find the serial port.&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;NOTE:&lt;/strong&gt;&#xA;To be able to run &lt;code&gt;make&lt;/code&gt; on the driver's folder, I had to install kernel headers with &lt;code&gt;sudo apt-get install linux-headers-$(uname -r)&lt;/code&gt; and update the build directory &lt;code&gt;sudo ln -s /usr/src/linux-headers-$(uname -r) /lib/modules/$(uname -r)/build&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I used chatGPT a bit for troubleshooting but I fear to screw-up with the kernel.&lt;/p&gt;&#xA;" OwnerUserId="31769" LastActivityDate="2023-08-24T04:06:27.190" Title="Compatibility With CH340 drivers on Horus?" Tags="|drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30269" PostTypeId="1" CreationDate="2023-08-29T05:49:05.110" Score="0" ViewCount="14" Body="&lt;p&gt;When I upgraded to &lt;code&gt;elementary OS 7 Horus&lt;/code&gt;, the &lt;code&gt;Vlc media player&lt;/code&gt; installed via &lt;code&gt;APT&lt;/code&gt; started stuttering during playback. So when I pause and/or resume a video, the audio fades away for a bit of seconds (while video is playing) then it resumes back again.&lt;/p&gt;&#xA;" OwnerUserId="24570" LastActivityDate="2023-08-29T05:49:05.110" Title="Vlc media player started stuttering during playback" Tags="|vlc|horus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30270" PostTypeId="1" CreationDate="2023-08-30T15:01:15.873" Score="0" ViewCount="43" Body="&lt;p&gt;I'm using Elementary OS 7 and have the following settings:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Turn off display when inactive for: 5 minutes&lt;/li&gt;&#xA;&lt;li&gt;Suspend when inactive for: Never&lt;/li&gt;&#xA;&lt;li&gt;Lock after screen turns off: Off&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The screen does not turn off after 5 minutes of inactivity.&lt;/p&gt;&#xA;&lt;p&gt;A workaround would be to have some way to turn the screen off myself. Running &lt;code&gt;xset dpms force off&lt;/code&gt; turns off the screen, but it turns back on by itself after about 10 seconds, so that doesn't work.&lt;/p&gt;&#xA;&lt;p&gt;I found one forum online suggesting to install Light Locker Settings, but I can't find this from the app center or anywhere... if anyone has clues on how to go about that workaround please let me know.&lt;/p&gt;&#xA;" OwnerUserId="31781" LastActivityDate="2023-08-30T15:01:15.873" Title="Turn off display when inactive not working; xset dpms force off only turns off for a few seconds" Tags="|settings|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30271" PostTypeId="1" CreationDate="2023-09-02T12:00:30.077" Score="0" ViewCount="24" Body="&lt;p&gt;There was a problem with the Wi-Fi connection. Every 5-10 seconds I get a notification that the network was disconnected. After 1-2 seconds connection returns.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/J6YDg.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/J6YDg.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;On the Live USB and Windows, the problem does not occur. I suppose a problem with some broken package, but I have no idea where to find the source of the problem.&lt;/p&gt;&#xA;" OwnerUserId="31785" LastActivityDate="2023-09-02T12:00:30.077" Title="5.1.7 Hera - Wi-fi internet connection problem" Tags="|release-hera|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30272" PostTypeId="1" CreationDate="2023-09-07T17:10:21.730" Score="1" ViewCount="51" Body="&lt;p&gt;What is the difference between input method and keyboard layout in elementaryOS 7?&lt;/p&gt;&#xA;&lt;p&gt;I noticed that when I change the input method, the language indicator doesn't update, but the language that I type in does change (similar to when I switch the keyboard layout). What is this for?&lt;/p&gt;&#xA;&lt;p&gt;The reason I'm asking is that there appears to be a bug: when I switch between layout and input method and back, sometime the language indicator gets messed up and begins displaying the wrong language and I'm unable to use some global keyboard shortcuts, despite using English layout (e.g. Ctrl+` to open up my Guake terminal). And another bug is that sometimes when I switch from English to some non-English layout, the input language doesn't change...&lt;/p&gt;&#xA;" OwnerUserId="18224" LastActivityDate="2024-03-24T20:00:35.067" Title="Difference between Input Method and Layout?" Tags="|keyboard-layout|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30273" PostTypeId="1" CreationDate="2023-09-11T15:01:31.883" Score="0" ViewCount="32" Body="&lt;p&gt;For about a week I've been searching alternatives to MacOS, trying several Linux distros and various combinations of VM's for both OS's -- installing apps from repositories and command-line -- interfacing a file-system change from APFS to EXT4 &amp;amp; ZFS. So far, I like ElementaryOS the best, as everything seems to work &amp;amp; it's pretty fast. However, problems exist managing multiple open apps.&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;For some apps, like a text editor, how to put multiple tabs in one window?&lt;/li&gt;&#xA;&lt;li&gt;Sometimes there's no global menu (file, edit, view, windows, etc) and no app-ID. Is this browser firefox, chrome, brave?&lt;/li&gt;&#xA;&lt;li&gt;Apps are similar in appearance (black/white/grey) and hard to tell apart. When I open one, it's hidden behind other open apps.&lt;/li&gt;&#xA;&lt;li&gt;How to minimize an app; how to prevent it from suddenly enlarging to fill whole screen.&lt;/li&gt;&#xA;&lt;li&gt;Create a Mac-like dock, with apps arranged vertically along the left margin -- never overwritten by an open app.&lt;/li&gt;&#xA;&lt;li&gt;Prevent notification from grabbing cursor control while I'm typing.&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;After a struggle akin to Ahab and the whale, I'm considering sinking a few grand into a new Mac and go back to what worked all along -- despite preferring Linux independence.&lt;/p&gt;&#xA;&lt;p&gt;Still, this is a great distro, and I haven't given up yet !!&#xA;Any help much appreciated, and thanks to all for all the great work.&lt;/p&gt;&#xA;" OwnerUserId="31805" LastEditorUserId="31805" LastEditDate="2023-09-11T15:06:28.260" LastActivityDate="2023-09-11T15:06:28.260" Title="Enhancing User Experience with Apps on Desktop" Tags="|notifications|minimize|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30274" PostTypeId="1" CreationDate="2023-09-18T13:31:39.403" Score="1" ViewCount="55" Body="&lt;p&gt;I've been trying to remove a calendar account but with no luck, the action itself seems to work but every time that I restart the computer, the calendar gets back again&lt;/p&gt;&#xA;&lt;p&gt;It's a Google Calendar&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/pFxcQ.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/pFxcQ.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;strong&gt;My environment&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;elementary OS 7 Horus&lt;/li&gt;&#xA;&lt;li&gt;Built on Ubuntu 22.04.3 LTS&lt;/li&gt;&#xA;&lt;li&gt;Linux 6.2.0-32-generic&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="28087" LastEditorUserId="28087" LastEditDate="2023-09-19T14:48:40.213" LastActivityDate="2023-09-19T14:48:40.213" Title="Can't remove a calendar account" Tags="|calendar|horus|" AnswerCount="0" CommentCount="2" ContentLicense="CC BY-SA 4.0" />
  <row Id="30275" PostTypeId="1" CreationDate="2023-09-22T00:07:25.567" Score="0" ViewCount="6" Body="&lt;p&gt;For some reason my catts (the window switcher) lost the border around the selected window, so I have to guess which window icon I'm gonna get when I let go of the Alt button.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas where I can go to fix that?&lt;/p&gt;&#xA;" OwnerUserId="16959" LastActivityDate="2023-09-22T00:07:25.567" Title="Fix/Change Catts styling" Tags="|gala|window-manager|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30276" PostTypeId="1" CreationDate="2023-09-22T06:36:41.817" Score="0" ViewCount="10" Body="&lt;p&gt;Here is my system config:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;         eeeeeeeeeeeeeeeee            USER@MYSYSTEM&#xA;      eeeeeeeeeeeeeeeeeeeeeee         ------------------ &#xA;    eeeee  eeeeeeeeeeee   eeeee       OS: elementary OS 6.1 Jólnir x86_64 &#xA;  eeee   eeeee       eee     eeee     Host: Latitude 3420 &#xA; eeee   eeee          eee     eeee    Kernel: 5.15.0-83-generic &#xA;eee    eee            eee       eee   Uptime: 44 mins &#xA;eee   eee            eee        eee   Packages: 2508 (dpkg), 13 (flatpack) &#xA;ee    eee           eeee       eeee   Shell: bash 5.0.17 &#xA;ee    eee         eeeee      eeeeee   Resolution: 2560x1080 &#xA;ee    eee       eeeee      eeeee ee   DE: Pantheon &#xA;eee   eeee   eeeeee      eeeee  eee   WM: Mutter(Gala) &#xA;eee    eeeeeeeeee     eeeeee    eee   Theme: io.elementary.stylesheet.lime [GTK3] &#xA; eeeeeeeeeeeeeeeeeeeeeeee    eeeee    Icons: elementary [GTK3] &#xA;  eeeeeeee eeeeeeeeeeee      eeee     Terminal: io.elementary.t &#xA;    eeeee                 eeeee       CPU: 11th Gen Intel i7-1165G7 (8) @ 4.700GHz &#xA;      eeeeeee         eeeeeee         GPU: Intel Device 9a49 &#xA;         eeeeeeeeeeeeeeeee            Memory: 5092MiB / 64037MiB&#xA;&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Every time in a zoom meeting when someone shares screen, zoom starts taking 90% of the cpu and soon the CPU temperature shoots up to the critical level where the system shuts down. Zoom crashing the system is still a problem, is there a work around for this?&lt;/p&gt;&#xA;" OwnerUserId="19702" LastActivityDate="2023-09-22T06:36:41.817" Title="Zoom takes 90% cpu and cpu overheats and shutdown system" Tags="|shutdown|cpu|overheat|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30277" PostTypeId="2" ParentId="24752" CreationDate="2023-09-22T16:06:43.097" Score="0" Body="&lt;p&gt;I have the same problem with this wlan card. The connection is down after a short time.&#xA;I noticed that if I keep a connection alive (like a browser session) the connection doesn't go down. So I launched a non stop ping to another local device into a terminal and I wait for a long time: tada ! the connection is steel up.&lt;/p&gt;&#xA;&lt;p&gt;So now, I launch a no ending ping process at gnome startup and it is fine.&lt;/p&gt;&#xA;&lt;p&gt;It's not very clean but I didn't find another solution...&lt;/p&gt;&#xA;" OwnerUserId="31844" LastEditorUserId="31844" LastEditDate="2023-09-22T16:08:07.533" LastActivityDate="2023-09-22T16:08:07.533" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30278" PostTypeId="1" CreationDate="2023-09-23T13:37:49.960" Score="0" ViewCount="84" Body="&lt;p&gt;I recently installed some OS updates through AppCenter and both my OS (GTK) theme and icon theme aren't applied to the Wingpanel and its menus anymore. Some (not all) default apps are also showing the same behaviour. See screenshots at the end of the question for examples.&lt;/p&gt;&#xA;&lt;p&gt;My themes are configured using &lt;a href=&quot;https://github.com/pantheon-tweaks/pantheon-tweaks&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;code&gt;pantheon-tweaks&lt;/code&gt;&lt;/a&gt;, which is on the latest available version (&lt;code&gt;1.1.0&lt;/code&gt;). I've tried multiple themes, but the ones in the screenshots here are specifically &lt;a href=&quot;https://github.com/daniruiz/skeuos-gtk&quot; rel=&quot;nofollow noreferrer&quot;&gt;Skeuos&lt;/a&gt; (GTK) and &lt;a href=&quot;https://github.com/bikass/kora&quot; rel=&quot;nofollow noreferrer&quot;&gt;Kora&lt;/a&gt; (icons). Both are on the latest version.&lt;/p&gt;&#xA;&lt;p&gt;Is this due to a recent change in some of these apps? Can I modify the files in these themes myself to try and fix the issue? I'd happily make an issue (or PR) to the themes to help resolve it, but I wouldn't know where to look.&lt;/p&gt;&#xA;&lt;p&gt;I'm happy to provide any additional info you may need.&lt;/p&gt;&#xA;&lt;p&gt;The themes are applied correctly to:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Screenshot&lt;/li&gt;&#xA;&lt;li&gt;Files&lt;/li&gt;&#xA;&lt;li&gt;Calendar&lt;/li&gt;&#xA;&lt;li&gt;Settings&lt;/li&gt;&#xA;&lt;li&gt;AppCenter&lt;/li&gt;&#xA;&lt;li&gt;Photos&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;The themes are &lt;em&gt;not&lt;/em&gt; applied to:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;The entire Wingpanel + submenus&lt;/li&gt;&#xA;&lt;li&gt;Mail&lt;/li&gt;&#xA;&lt;li&gt;Calculator&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;h3&gt;Comparison Screenshots&lt;/h3&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;&lt;h4&gt;Screenshot tool (OS theme applied correctly) vs Calculator (OS theme no longer applied):&lt;/h4&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/lG0GS.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/lG0GS.png&quot; alt=&quot;Screenshot vs Calculator&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;h4&gt;Applications menu in Wingpanel (both OS and icon themes no longer applied):&lt;/h4&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/XJpTK.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/XJpTK.png&quot; alt=&quot;Applications menu&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;h4&gt;App icons in Dock (icon theme applied correctly):&lt;/h4&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wnlZT.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wnlZT.png&quot; alt=&quot;Dock&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;li&gt;&lt;h4&gt;Files (OS and icon themes applied correctly) vs Wingpanel Calendar (OS theme no longer applied):&lt;/h4&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/Gbblf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Gbblf.png&quot; alt=&quot;Files vs Wingpanel Calendar&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;" OwnerUserId="31845" LastEditorUserId="31845" LastEditDate="2023-09-23T15:08:12.877" LastActivityDate="2023-09-23T15:08:12.877" Title="Themes no longer applied to Wingpanel menus and certain default apps" Tags="|wingpanel|themes|horus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30280" PostTypeId="1" CreationDate="2023-09-24T11:16:18.717" Score="0" ViewCount="25" Body="&lt;p&gt;I am using the newest version of Elementary OS (as of 24 Sep 2023)&#xA;using a HP 250 G5 and whenever i turn on my linux computer, it just shows a black screen with backlight, but no black line or anything.&#xA;It was working not too long ago, i finished the installation of Elementary OS after attempting to use another OS (PearOS, which failed) and it told me to remove the USB, then nothing happened. I turned off pc and turned on again and the GRUB menu appears, i open Elementary OS and black screen. Now, not even GRUB appears, just black screen with backlight ON.&lt;/p&gt;&#xA;" OwnerUserId="31848" LastActivityDate="2024-02-22T03:09:01.200" Title="Black screen with backlight at startup" Tags="|grub|hp|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30281" PostTypeId="2" ParentId="30280" CreationDate="2023-09-25T03:00:18.640" Score="0" Body="&lt;h2&gt;found problem&lt;/h2&gt;&#xA;&lt;p&gt;The GPU / Graphics Card failed and no longer works when connected to external monitor orr built in screen.&lt;/p&gt;&#xA;&lt;p&gt;-&lt;/p&gt;&#xA;&lt;p&gt;This may be helpful with anyone with the same issue this may be the issue.&#xA;You know the OS is running and the screen but there’s no output? Dead GPU.&lt;/p&gt;&#xA;" OwnerUserId="31848" LastActivityDate="2023-09-25T03:00:18.640" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30282" PostTypeId="1" CreationDate="2023-09-29T00:53:43.927" Score="0" ViewCount="17" Body="&lt;p&gt;on a Mac Mini late 2009 with a SSD I have installed eOS 7. After solving the problem with WLAN and installing some software I was able to work fine. I could not install the grafic-driver from Nvidia because it is no longer supported by kernel 6.2.&lt;/p&gt;&#xA;&lt;p&gt;But the boot delay problem I still have and can't solve it. The SSD is recognized as bootdevice and is in the list of all bootdevices with the ALT key. I put the grub software in &amp;quot;verbose&amp;quot; mode and see that after about 30 seconds the grub software does its output.&lt;/p&gt;&#xA;&lt;p&gt;What does the efi firmware from Apple during this time? How can I reduce this delay time to 0?&lt;/p&gt;&#xA;&lt;p&gt;With efibootmgr I saw no possibility to act on it. Maybe something is hiding for me there.&lt;/p&gt;&#xA;&lt;p&gt;This is my first time in this forum.&lt;/p&gt;&#xA;&lt;p&gt;I would be very grateful for your hints and possible help.&lt;/p&gt;&#xA;&lt;p&gt;With kind regards, willi&#xA;Asuncion, Paraguay&lt;/p&gt;&#xA;" OwnerUserId="31867" LastActivityDate="2023-09-29T00:53:43.927" Title="mac mini late 2009 30 s boot delay for grub" Tags="|system-installation|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30283" PostTypeId="1" CreationDate="2023-09-30T09:35:28.553" Score="0" ViewCount="39" Body="&lt;p&gt;I'm re-installing elementary os as my primary os on my laptop. It has a 500GB SSD and 16 GB RAM.&lt;/p&gt;&#xA;&lt;p&gt;I installed elementary os 7 in June and am now re-installing because I ran into problems regarding space on the boot partition/drive? Something like that, the system couldn't run updates anymore. Now I'm wanting to do the partitions better, but I've never done that before and honestly don't really know what any of it means. Could anyone help me out me a quick tutorial or direct me to one?&lt;/p&gt;&#xA;&lt;p&gt;This is where I stand:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/krsVD.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/krsVD.jpg&quot; alt=&quot;current partitions: 276MB fat32; 1GB ext4; 511GB luks&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Thanks in advance!&lt;/p&gt;&#xA;" OwnerUserId="31871" LastActivityDate="2023-09-30T09:35:28.553" Title="I need help choosing/creating partitions for elementary os installation" Tags="|system-installation|boot|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30286" PostTypeId="1" CreationDate="2023-10-06T01:15:06.380" Score="0" ViewCount="8" Body="&lt;p&gt;Sorry for the obtuse title, but this might be a bit unusual.&lt;/p&gt;&#xA;&lt;p&gt;I set EOS up on a Samsung USB/SSD for my desktop a while back. I've been using it (and tweaking) for a while and it works well.&lt;/p&gt;&#xA;&lt;p&gt;The desktop has Win10 installed on the internal drive.&lt;/p&gt;&#xA;&lt;p&gt;I've gotten to the point where I would like to migrate the Samsung installation to the internal drive.&lt;/p&gt;&#xA;&lt;p&gt;Any thoughts on the simplest way to do that?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-10-06T01:15:06.380" Title="Permanent install" Tags="|system-installation|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30287" PostTypeId="2" ParentId="24669" CreationDate="2023-10-07T02:09:59.807" Score="1" Body="&lt;p&gt;Your second option worked for me, for what it's worth. At first I suspected that maybe the permissions needed to be &lt;code&gt;600&lt;/code&gt; rather than &lt;code&gt;644&lt;/code&gt;, but that didn't seem to matter.&lt;/p&gt;&#xA;&lt;p&gt;In my case, it was &lt;code&gt;citrixlog&lt;/code&gt;, a user created with user ID 1001 by the Citrix Workspace client for Linux.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# replace 'citrixlog' with whatever user pertains to your situation&#xA;echo '[User]&#xA;SystemAccount=true' | sudo tee /var/lib/AccountsService/users/citrixlog&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Then, either reboot —or— log out of the graphical environment, switch to a virtual console with &lt;kbd&gt;Ctrl&lt;/kbd&gt;+&lt;kbd&gt;Alt&lt;/kbd&gt;+&lt;kbd&gt;F1&lt;/kbd&gt; and restart the following two services:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo systemctl restart accounts-daemon&#xA;sudo systemctl restart lightdm&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;An alternative, mentioned in &lt;a href=&quot;https://askubuntu.com/questions/114303/how-to-limit-user-names-in-lightdm-login-screen-when-accountsservice-is-used/114321#114321&quot;&gt;this Ask Ubuntu thread&lt;/a&gt; is to change the user ID to something less than 500, so it's considered a &amp;quot;system&amp;quot; account and hidden from the greeter.&lt;/p&gt;&#xA;&lt;p&gt;One downside to that alternative is you may have to change the owner/group on all the files and directories belonging to that user, and that's beyond the scope of this thread. Besides, the user / group ID will probably go back to what it was before next time its associated package gets updated. So use the first method above, if you can.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2023-10-07T02:21:28.393" LastActivityDate="2023-10-07T02:21:28.393" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30288" PostTypeId="1" CreationDate="2023-10-07T23:43:09.550" Score="0" ViewCount="52" Body="&lt;p&gt;Going to the Installed page of AppCenter shows the usual &amp;quot;Checking for Updates; Downing a list ...&amp;quot; message along with a spinning wheel in the lower right corner saying the same thing, but when the latter goes away the main page is not updated: It just continues to say &amp;quot;Checking for Updates; Downing a list ...&amp;quot; indefinitely and never shows me a list of updates to install (I've been waiting half an hour). I stopped and restarted the AppCenter, and tried again, with the same result.&lt;/p&gt;&#xA;&lt;p&gt;It's been flaky like this before, but now it seems to have stopped working completely.&lt;/p&gt;&#xA;" OwnerUserId="19874" LastEditorUserId="19874" LastEditDate="2023-11-01T17:35:45.807" LastActivityDate="2024-04-04T20:31:48.590" Title="appcenter checks for updates but doesn't display any" Tags="|appcenter|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30289" PostTypeId="2" ParentId="29482" CreationDate="2023-10-08T21:56:41.473" Score="0" Body="&lt;p&gt;Although it is not in AppCenter anymore, &lt;a href=&quot;https://github.com/artemanufrij/webpin&quot; rel=&quot;nofollow noreferrer&quot;&gt;Webpin&lt;/a&gt; can still be installed in elementaryOS 6.1 (and mostly likely 7.x, too), using &lt;a href=&quot;https://github.com/artemanufrij/webpin#install-from-github&quot; rel=&quot;nofollow noreferrer&quot;&gt;the build instructions&lt;/a&gt; from the GitHub project page.&lt;/p&gt;&#xA;&lt;p&gt;You will probably want to install &lt;code&gt;elementary-sdk&lt;/code&gt; from the system package manager, so that you're sure to have all the build toolchain stuff you need to build it from source.&lt;/p&gt;&#xA;&lt;p&gt;I myself use Webpin to wrap Google Calendar, Outlook mail, and a half-dozen other sites and services, and it works fine. As someone who has used Fluid.app on macOS for years, and has tried every &amp;quot;site-specific browser&amp;quot; option on Linux since &lt;a href=&quot;https://wiki.mozilla.org/Prism&quot; rel=&quot;nofollow noreferrer&quot;&gt;Prism&lt;/a&gt;, I'm happy to say Webpin is one that pretty much gets it right.&lt;/p&gt;&#xA;&lt;p&gt;The only downside is it (currently) lacks the ability to clear cookies and other site-specific storage on demand, and its cookie store is shared among all instances. This means that you can't, for example, have personal and uni/work Outlook accounts pinned as separate apps.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2023-10-08T22:54:32.897" LastActivityDate="2023-10-08T22:54:32.897" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30290" PostTypeId="2" ParentId="11868" CreationDate="2023-10-10T20:08:20.357" Score="0" Body="&lt;p&gt;I wound up using sudo apt reinstall --wingpanel which I found somewhere. The system spat it back saying I had dkpg issues and suggested I reload everything and gave me a line to use. Did that (it takes a while) and shut down via terminal using shutdown now (I think) and everything is peachy again. Hope this helps&lt;/p&gt;&#xA;" OwnerUserId="31922" LastActivityDate="2023-10-10T20:08:20.357" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30291" PostTypeId="1" CreationDate="2023-10-15T12:41:51.133" Score="0" ViewCount="11" Body="&lt;p&gt;I've got EOS v7.1 set up with 2 monitors.&lt;/p&gt;&#xA;&lt;p&gt;The primary monitor is the right side one.&lt;/p&gt;&#xA;&lt;p&gt;How do I switch that to the left side?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;&lt;p&gt;Chris&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2024-03-13T16:04:00.483" Title="Dual Monitor Usage" Tags="|display|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30292" PostTypeId="2" ParentId="30291" CreationDate="2023-10-15T14:13:27.083" Score="0" Body="&lt;p&gt;There is a star in the upper left hand corner of the monitor in setup. That will change it.&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-10-15T14:13:27.083" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30293" PostTypeId="1" CreationDate="2023-10-15T17:03:03.440" Score="0" ViewCount="8" Body="&lt;p&gt;When switching between projection modes using the keyboard shortcut (super + p), the modes just switch like crazy without any graphical interface like in widnows or any other distro (I don't know if I describe it clearly enough, that's why I'm attaching the screen from windows). This is quite annoying, just pressing the keys while the display is flashing until I get to the projection I need. It amazes me that I seem to be the only one who is bothered by this.&#xA;Is there a utility that solves this?&lt;/p&gt;&#xA;&lt;p&gt;I would also appreciate having the plank and top bar on the extended monitor as well. I managed to achieve this once when I was playing around with modes, but it seems that it was more of a &amp;quot;bug&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/wTzLt.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/wTzLt.png&quot; alt=&quot;windows gui project dual monitor&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="31940" LastActivityDate="2023-10-15T17:03:03.440" Title="Dual monitors - graphical menu when switching" Tags="|multitasking-view|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30294" PostTypeId="1" CreationDate="2023-10-18T16:35:13.057" Score="0" ViewCount="22" Body="&lt;p&gt;I am trying to create a partition of 100GB on a 900GB SSD.&#xA;However, when I go to create the partition Widows Disk Manager says that there is only 1 GB of available space even though File Explorer says that there are 600GB free space.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/E45eM.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/E45eM.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&#xA;defraggler shows that there are some files at the end of the drive I am trying to partition, which are preventing the partition from having more than 1GB of linear free space.&#xA;How to move these files to the beginning or even middle of the drive so that Disk Manager can partition 100GB of the free space?&lt;/p&gt;&#xA;" OwnerUserId="31949" LastActivityDate="2023-10-18T16:35:13.057" Title="How to move files from the end of the drive to the beginning?" Tags="|filesystem|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30295" PostTypeId="2" ParentId="15746" CreationDate="2023-10-19T19:30:58.613" Score="0" Body="&lt;p&gt;Or you could do it via graphical interface, which presents additional options, by simply installing GNOME Tweaks (available by searching within the AppCenter). From here, simply find the 'Windows' tab at the bottom of the panel and review the options in the 'Window Focus' section. You can choose 'Sloppy', 'Secondary-Click' and/or 'Raise Windows When Focused'. Hope that's some help!&lt;/p&gt;&#xA;" OwnerUserId="24191" LastActivityDate="2023-10-19T19:30:58.613" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30296" PostTypeId="2" ParentId="3042" CreationDate="2023-10-19T20:12:21.803" Score="0" Body="&lt;p&gt;After upgrading (including a new kernel which usually takes up a bit of space), I ran into the same problem. Freeing up some disk space as mentioned before did the trick. For this, I&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Pressed &lt;em&gt;Ctrl&lt;/em&gt; + &lt;em&gt;Alt&lt;/em&gt; + &lt;em&gt;F1&lt;/em&gt; on the login screen to open a TTY&lt;/li&gt;&#xA;&lt;li&gt;Logged in&lt;/li&gt;&#xA;&lt;li&gt;Ran &lt;code&gt;sudo apt autoremove&lt;/code&gt; to purge old packages (confirm prompt)&lt;/li&gt;&#xA;&lt;li&gt;Ran &lt;code&gt;reboot&lt;/code&gt; to restart&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;This happened to remove some older Kernel version which freed up enough space for the login to work again.&lt;/p&gt;&#xA;" OwnerUserId="6463" LastActivityDate="2023-10-19T20:12:21.803" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30297" PostTypeId="1" CreationDate="2023-10-20T18:38:35.287" Score="0" ViewCount="7" Body="&lt;p&gt;I'm using ElementaryOS and I have it set to &amp;quot;Turn off display when inactive for&amp;quot; 5 minutes.&lt;/p&gt;&#xA;&lt;p&gt;When this triggers, the connected monitors will say there is no HDMI signal, but then they will both go blank without actually turning off. What I mean is they go black but seem to be emitting a full screen full of black light. You can see it in the dark.&lt;/p&gt;&#xA;&lt;p&gt;When I actually put my OS into suspend mode, by choosing Suspend, the monitors will actually turn off and stop emitting light.&lt;/p&gt;&#xA;&lt;p&gt;How can I get &amp;quot;turn display off&amp;quot; to also get the monitors to turn off and stop emitting light?&lt;/p&gt;&#xA;&lt;p&gt;There are two different monitors connected, one Asus and one Dell.&lt;/p&gt;&#xA;" OwnerUserId="31955" LastActivityDate="2023-10-20T18:38:35.287" Title="Monitors go blank but still emitting light when display turned off; actually go black when in suspend" Tags="|display|suspend|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30298" PostTypeId="1" CreationDate="2023-10-20T20:43:45.173" Score="0" ViewCount="7" Body="&lt;p&gt;I'm getting a bunch of stuff reconnected after a house move.&lt;/p&gt;&#xA;&lt;p&gt;I've got a Wacom Intuous Pro Small tablet. I've plugged the dongle into the desktop and actuated the tablet by pressing on one of the buttons, but EOS doe not see the tablet.&lt;/p&gt;&#xA;&lt;p&gt;Thoughts?&lt;/p&gt;&#xA;" OwnerUserId="31146" LastActivityDate="2023-10-20T20:43:45.173" Title="Wacom Tablet not recognized in Horus" Tags="|hardware|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30300" PostTypeId="1" CreationDate="2023-10-25T10:00:27.590" Score="0" ViewCount="75" Body="&lt;p&gt;When I download the files on my computer, I have a problem with files extensions. For example: its impossible to open PDF files with one-click - I have to click &amp;quot;Open with&amp;quot; and select application (For example Document Viewer or Google Chrome).&lt;/p&gt;&#xA;&lt;p&gt;The File Manager ignores default application&lt;/p&gt;&#xA;&lt;p&gt;Its very nuisance thing since I am dealing with PDF files a lot.&lt;/p&gt;&#xA;&lt;p&gt;Do you know how can I fix it?&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/dSPcv.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/dSPcv.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/ep2E3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/ep2E3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/4ANou.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4ANou.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="19187" LastActivityDate="2024-03-24T21:04:25.470" Title="Elementary OS 7 - File Manager - wrong default application for PDF" Tags="|pantheon-files|files|file-management|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30301" PostTypeId="2" ParentId="26422" CreationDate="2023-10-26T13:52:59.203" Score="0" Body="&lt;p&gt;The problem is still present. But not only on elementaryOS, but on other distros as well (e.g. Mint 21.2).&lt;/p&gt;&#xA;&lt;p&gt;Interestingly, &amp;quot;xinput --query-state&amp;quot; correctly reports the pressed buttons.&lt;/p&gt;&#xA;&lt;p&gt;So I have created a little proof-of-concept in Python, which uses &amp;quot;xinput&amp;quot; and &amp;quot;xdotool&amp;quot; to emulate the button presses. This, at least, makes the SWAY Trackpad usable. But be warned: This script executes &amp;quot;xinput&amp;quot; 20 times a second, so do not use this in production.&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;#!/usr/bin/python3&#xA;&#xA;import os&#xA;import subprocess&#xA;import time&#xA;&#xA;def put(t): print(t)&#xA;&#xA;DEVICE_NAME = 'iTouch Pad iTouch Pad Mouse'&#xA;THROTTLE = 0.05&#xA;&#xA;button_state = {1:None, 2:None}&#xA;value_state = {0:0, 1:0}&#xA;&#xA;# Command line to query device state&#xA;query_cmds = ['/usr/bin/xinput', '--query-state', DEVICE_NAME]&#xA;&#xA;while True:&#xA;    # Query state&#xA;    r = subprocess.run(query_cmds, stdout=subprocess.PIPE).stdout&#xA;    &#xA;    # Parse result lines&#xA;    for l in r.split(b'\n'):&#xA;        #put('&amp;quot;%s&amp;quot;' % l)&#xA;        &#xA;        # Handle &amp;quot;button&amp;quot; results&#xA;        if l.startswith(b'\tbutton['):&#xA;            &#xA;            # Extract button_num and value. @TODO: Use regexp&#xA;            i_out = l.index(b']')&#xA;            button_num = int(l[l.index(b'[')+1:i_out])&#xA;            value = True if l[i_out+2:] == b'down' else False&#xA;            &#xA;            # Issue xdotool if value changed&#xA;            old_value = button_state[button_num] if button_num in button_state else None&#xA;            if value != old_value:&#xA;                cmd = '/usr/bin/xdotool %s %d' % ('mousedown' if value else 'mouseup', button_num)&#xA;                os.system(cmd)&#xA;            button_state[button_num] = value&#xA;        &#xA;        elif l.startswith(b'\tvaluator['):&#xA;            i_out = l.index(b']')&#xA;            # Extract value_num and value. @TODO: Use regexp&#xA;            i_out = l.index(b']')&#xA;            value_num = int(l[l.index(b'[')+1:i_out])&#xA;            value = int(l[i_out+2:])&#xA;            &#xA;            old_value = value_state[value_num] if value_num in value_state else None&#xA;            #if value != old_value: # Call xdotool if value changed&#xA;            if value != old_value and button_state[1]:  # Call xdotool if value changed AND only while dragging&#xA;                x = value_state[0]&#xA;                y = value_state[1]&#xA;                cmd = '/usr/bin/xdotool mousemove %d %d' % (x, y)&#xA;                os.system(cmd)&#xA;            value_state[value_num] = value&#xA;            &#xA;        &#xA;    # Throttle&#xA;    time.sleep(THROTTLE)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Hope it helps someone having the same problem (device)&lt;/p&gt;&#xA;" OwnerUserId="31971" LastActivityDate="2023-10-26T13:52:59.203" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30302" PostTypeId="1" CreationDate="2023-10-26T14:05:55.813" Score="0" ViewCount="32" Body="&lt;p&gt;As i said in the title, i can't wake my laptop from sleep.&#xA;All i after waking up the pc is a black screen with &amp;quot;_&amp;quot; not even blinking, but just static.&#xA;When i try to press &amp;quot;CTRL + ALT + F1&amp;quot; the login screen appears in tty1, but the pc is stuck, and i can't even get again in the graphic session by pressing &amp;quot;CTRL + ALT + F7&amp;quot;.&#xA;The only solution i have is to shutdown the pc and boot again, loosing all the work i was doing.&#xA;I'm using nvidia 535 drivers, i've also tried the 525, but nothing changes.&lt;/p&gt;&#xA;" OwnerUserId="31972" LastActivityDate="2024-03-21T02:49:48.020" Title="Can't wake up from sleep" Tags="|nvidia|suspend|horus|nvidia-driver|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30303" PostTypeId="2" ParentId="30300" CreationDate="2023-10-26T18:03:56.370" Score="0" Body="&lt;p&gt;You should be able to select &amp;quot;Document Viewer&amp;quot; in the &amp;quot;Other Applications&amp;quot; dialog with &amp;quot;Set as Default&amp;quot; ticked.  After that, PDF files should automatically open with &amp;quot;Document Viewer&amp;quot; when double-clicked.  You &lt;em&gt;must&lt;/em&gt; use the &amp;quot;Other Applications&amp;quot; dialog with &amp;quot;Set as Default&amp;quot; ticked - if you just select from the Open in submenu then the default app is not changed (the document opens with the selected app on a one-off basis).&lt;/p&gt;&#xA;&lt;p&gt;An alternative method is to select the PDF and choose &amp;quot;Properties&amp;quot; from the context menu (secondary-click) or press &lt;code&gt;&amp;lt;Alt&amp;gt;Enter&lt;/code&gt; to bring up the &amp;quot;Properties&amp;quot; window. There you can see a &amp;quot;Opens with&amp;quot; combobox which sets the default app.&lt;/p&gt;&#xA;&lt;p&gt;Note that you must &lt;em&gt;double-click&lt;/em&gt; the PDF to open it (or select it and press &lt;code&gt;Enter&lt;/code&gt;).  Single-click activation for non-folders has been discontinued.&lt;/p&gt;&#xA;" OwnerUserId="31975" LastEditorUserId="31975" LastEditDate="2023-10-26T18:11:03.217" LastActivityDate="2023-10-26T18:11:03.217" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="30305" PostTypeId="2" ParentId="30272" CreationDate="2023-10-26T18:36:06.393" Score="0" Body="&lt;p&gt;The keyboard layout governs which character is generated by pressing a key on the keyboard. You would normally install the one that corresponds to the characters actually printed on your keyboard keys. Input methods are extra pieces of software that are typically used to enter languages such as Chinese, Japanese and Korean using a Western keyboard. For example in Japanese you might enter two characters &amp;quot;ko&amp;quot; and get a menu of 200 possible Hiragana or Kanji corresponding to that syllable (こ　腰　etc) If you can generate all the characters you need directly with the keyboard then you do not need to install an input method at all. As an input method may use some shortcuts to control them these may clash with existing system or app shortcuts you should not use one unless really needed.  The input method may include a tool to configure which shortcuts are used, though, and you can change the &amp;quot;Switch Engines&amp;quot; shortcut in System Settings/Keyboard.&lt;/p&gt;&#xA;" OwnerUserId="31975" LastEditorUserId="31975" LastEditDate="2023-10-26T18:43:55.530" LastActivityDate="2023-10-26T18:43:55.530" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30306" PostTypeId="1" CreationDate="2023-11-05T14:05:51.377" Score="1" ViewCount="66" Body="&lt;p&gt;For the last month or so I have been unable to use the AppCenter to update anything. Checking for updates displays the &amp;quot;Getting download sizes ...&amp;quot;  spinning wheel as before, but once it's done, NOTHING is displayed in the window that used to list all the available updates and give me an option to update them. It's just blank save for the proforma message &amp;quot;Checking for updates ...&amp;quot; (which it's clearly not doing). Please advise! Or I'll be forced to give up on Elementary completely because if the AppCenter isn't working, Elementary isn't working.&lt;/p&gt;&#xA;&lt;p&gt;No questions like this have been posted on this formum since 2021, so I think this is a new problem (for me only?). Here's the output of &amp;quot;uname -a&amp;quot; so you know what system version I'm using:&lt;/p&gt;&#xA;&lt;p&gt;Linux Z990-R-AAS9U1-e6fde4c9 6.2.0-34-generic #34~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Sep  7 13:12:03 UTC 2 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2023-11-05T14:05:51.377" Title="I can no longer update anything using the AppCenter" Tags="|appcenter|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30308" PostTypeId="1" CreationDate="2023-11-08T08:19:05.877" Score="1" ViewCount="41" Body="&lt;p&gt;Does anybody know how to use an Android tablet as a second monitor in ElementaryOS (for extending my desktop)? I know that this should be possible in Ubuntu using one of the latest versions of Gnome but I am not sure if in ElementaryOS can be achieved.&lt;/p&gt;&#xA;" OwnerUserId="24605" LastActivityDate="2023-12-17T10:04:20.687" Title="Android tablet as second sceen in ElementaryOS" Tags="|display|desktop|monitors|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30309" PostTypeId="1" CreationDate="2023-11-11T19:51:16.653" Score="0" ViewCount="10" Body="&lt;p&gt;Dual boot with windows, clean install Elementary OS Odin (also tried Horus) network transfer speed 15mbs boot to windows same file on same hard drive transferring to same computer 115mbs&#xA;Clean install of Linux mint 98mbs, I would love to use Elementary because it’s so beautiful but this is a deal breaker have tried setting the network to manual 1 gigabit which is what I have, the transfer goes even slower tried disabling ipv6 also no joy.&lt;/p&gt;&#xA;" OwnerUserId="32038" LastActivityDate="2023-11-11T19:51:16.653" Title="Very slow file transfers" Tags="|networking|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30310" PostTypeId="2" ParentId="30262" CreationDate="2023-11-13T23:51:34.243" Score="0" Body="&lt;p&gt;I think you are on the right path. Your script sets the title as good as it can, and it seems your terminal emulator already makes use of the set title, but at the wrong place, you just need to tell it to name your tabs based on it.&lt;/p&gt;&#xA;&lt;p&gt;For KDE Konsole, in the menu where you can change the title of a tab, the title can be based on a pattern, where the &lt;code&gt;%w&lt;/code&gt; pattern means the window title set by the shell.&lt;/p&gt;&#xA;&lt;p&gt;Now, I'm not an Elementary OS user so I don't know whether this is supported in its native terminal, but I just figured it out for myself for KDE Konsole with your help (that commented link was very useful!), so I figured I could let you know about it, in case Elementary's terminal also supports something similar.&lt;/p&gt;&#xA;" OwnerUserId="32044" LastActivityDate="2023-11-13T23:51:34.243" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30311" PostTypeId="1" CreationDate="2023-11-14T03:10:00.550" Score="0" ViewCount="21" Body="&lt;p&gt;I'm an elementaryOS first timer, but been using Linux since 2001. I installed latest eOS yesterday but I found some difficulties, one of them is to set up 'double click'.&lt;/p&gt;&#xA;&lt;p&gt;I've already set up to use double click on Files, but it won't work on a 'Save File' window.&lt;/p&gt;&#xA;&lt;p&gt;When I try to save some files, I always double click folders to navigate folders, but if I double click, instead I will rewrite unintended file.&lt;/p&gt;&#xA;" OwnerUserId="1234" LastActivityDate="2023-11-14T03:10:00.550" Title="Double click instead of single click when to save files" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30312" PostTypeId="1" CreationDate="2023-11-15T13:25:26.793" Score="0" ViewCount="24" Body="&lt;p&gt;I installed a fresh copy of elementaryOs 7.1 and discovered that soon after logging in for the first time it started making requests to the internet.&#xA;Now - I can understand and reason canonical IPs and NTP requests, up to extent amazon (aws) and if really stretching, also google (tho it would be nice to know what exactly is this as well).&lt;/p&gt;&#xA;&lt;p&gt;But what is making requests to Cloudflare and Fastly ?&lt;/p&gt;&#xA;&lt;p&gt;I've tried running recursive grep over /etc (found nothing) and all files recursively (excluding /dev) searching for 151.101., but albeit being on a powerful machine with plenty of memory and fast SSD it has ran already for hours and not found anything yet.&lt;/p&gt;&#xA;&lt;p&gt;Any ideas?&lt;/p&gt;&#xA;&lt;p&gt;A list of sort | uniq'ed IPs it's bombing (bombing meaning trying to reach as I've essentially blocked it getting further from the router for now) is &lt;a href=&quot;https://pastebin.com/kcgVPWmz&quot; rel=&quot;nofollow noreferrer&quot;&gt;here&lt;/a&gt; (couldn't include post it here, stackexchange thought it to be spam)&lt;/p&gt;&#xA;" OwnerUserId="32049" LastEditorUserId="32049" LastEditDate="2023-11-15T13:26:36.740" LastActivityDate="2023-11-15T13:26:36.740" Title="Fresh install of elementary 7.1 makes requests to unresolvable/strange IP address blocks" Tags="|networking|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30313" PostTypeId="2" ParentId="14838" CreationDate="2023-11-16T16:53:54.830" Score="0" Body="&lt;p&gt;I just had this issue while leaving headpones plugged in.&lt;/p&gt;&#xA;&lt;p&gt;For posterity, the solution from the above &amp;quot;#20&amp;quot; answer:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1585084&lt;/a&gt;&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;dualshock3nerd (dualshock3nerd) wrote on 2017-01-24: #20&#xA;&#xA;I found a more viable workaround based on comment #18 by Anthony that still lets you use your headphone jack provided you have an unused front microphone jack.&#xA;    Install alsa-tools-gui&#xA;    Run hdajackretask&#xA;    Override &amp;quot;Green Headphone, Front side&amp;quot; to &amp;quot;Not connected&amp;quot;&#xA;    Override &amp;quot;Pink Mic, Front side&amp;quot; to &amp;quot;Headphone&amp;quot;&#xA;    Click &amp;quot;Apply now&amp;quot;&#xA;    Click &amp;quot;Install boot override&amp;quot; to make this permanent&#xA;From now on, just plug your headphones in the front microphone jack instead of the front headphone jack and you're golden. Speakers still get automatically muted when you plug in your headphones.&#xA;This is much more viable to me as I just use a USB microphone anyway.&#xA;I tested this for a few days and this bug never reappeared.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also note that the missing DBus service is created in the accountsservice-ubuntu-schemas package&#xA;&lt;a href=&quot;https://packages.ubuntu.com/focal/gnome/accountsservice-ubuntu-schemas&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://packages.ubuntu.com/focal/gnome/accountsservice-ubuntu-schemas&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="32055" LastEditorUserId="32055" LastEditDate="2023-11-16T17:20:32.270" LastActivityDate="2023-11-16T17:20:32.270" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30314" PostTypeId="1" CreationDate="2023-11-17T09:20:00.530" Score="0" ViewCount="13" Body="&lt;p&gt;I'm not sure if I'm the only one with this problem, but since a few days Wingpanel has started to occupy the CPU to 100%.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/g8uDO.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/g8uDO.png&quot; alt=&quot;HTop&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;That definitely can't be intentional, or am I wrong?&lt;/p&gt;&#xA;" OwnerUserId="32059" LastActivityDate="2023-11-17T09:20:00.530" Title="Wingpanel takes up 100% of the CPU" Tags="|wingpanel|bugs|horus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30315" PostTypeId="2" ParentId="30308" CreationDate="2023-11-17T09:27:21.547" Score="0" Body="&lt;p&gt;&lt;a href=&quot;https://askubuntu.com/questions/28608/how-do-you-use-an-android-tablet-as-a-second-display&quot;&gt;This&lt;/a&gt; might provide you with some options to try out. As elementary is basically Ubuntu there is a good chance for things working on Ubuntu to work on elementary, too.&lt;/p&gt;&#xA;" OwnerUserId="32059" LastActivityDate="2023-11-17T09:27:21.547" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30316" PostTypeId="1" CreationDate="2023-11-21T08:23:03.207" Score="0" ViewCount="8" Body="&lt;p&gt;After restart mouse works for a second moving cursor vertically and horizontally then drops to the bottom of the screen and cannot move vertically anymore.&#xA;Tried to disable and re-enable the mouse using xinput disable / enable commands&#xA;Updated to latest linux headers.&#xA;Another wired mouse works fine.&#xA;The mouse that has issues is model Delux M618&#xA;It might be that vertical movement is much faster than horizontal but it's hard to tell what's happening.&#xA;How can I fix this issue?&lt;/p&gt;&#xA;" OwnerUserId="32062" LastActivityDate="2023-11-21T08:23:03.207" Title="Wired mouse stops moving vertically but moves horizontaly" Tags="|mouse|" AnswerCount="0" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30318" PostTypeId="1" CreationDate="2023-11-28T04:25:02.873" Score="0" ViewCount="67" Body="&lt;p&gt;Installed grub-customizer, applied my changes, saved them and ran sudo update-grub, once i restarted the bootloader didnt change at all, am i doing something wrong?&lt;/p&gt;&#xA;" OwnerUserId="32078" LastActivityDate="2023-11-28T04:25:02.873" Title="grub-customizer not updating any settings on elementary OS 7.1 horus" Tags="|grub|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30319" PostTypeId="1" CreationDate="2023-11-29T17:08:04.340" Score="0" ViewCount="11" Body="&lt;p&gt;I've been purchasing elementary OS since 2017, and using Linux since 1996. I use 3 desktops, 1 is a personal browser/email on Chrome, workspace 2 is a work browser on Microsoft Edge (Chromium was having issues). 3rd desktop is a file folder and open PDF files for work. Around the same time every afternoon, both browsers and files move to the same desktop/workspace. If I open a new workspace, they all move to the new one, but they are &amp;quot;ghosts&amp;quot;, meaning I have to return to the original desktop to interact with the browser. I'd like to blame Microsoft for this (kidding :) but has anyone experienced this, and found a way to stop it? Thanks!&lt;/p&gt;&#xA;" OwnerUserId="32067" LastEditorUserId="32067" LastEditDate="2023-12-11T14:56:12.437" LastActivityDate="2023-12-11T14:56:12.437" Title="Desktops combining in the afternoon, all programs on 1 desktop" Tags="|workspace|desktop-environment|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30320" PostTypeId="1" CreationDate="2023-12-02T05:26:12.857" Score="0" ViewCount="16" Body="&lt;p&gt;It has been awhile and now I'm back on elementary OS. I think the last time I tried it was release 5.0&lt;/p&gt;&#xA;&lt;p&gt;My question is: have the icons in Applications menu been hardcoded in Horus? I'm asking because no matter what I do I can't change them.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/H4fUW.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/H4fUW.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;best regards&#xA;Storm&lt;/p&gt;&#xA;" OwnerUserId="8902" LastActivityDate="2023-12-02T05:26:12.857" Title="Is the icons in Applications menu hardcoded?" Tags="|applications|icons|horus|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30321" PostTypeId="1" CreationDate="2023-12-03T16:11:07.507" Score="0" ViewCount="18" Body="&lt;p&gt;As described in title, lock screen doesn't work. I can't lock with Applications &amp;gt; Lock, or by closing the laptop lid, but running &lt;code&gt;io.elementary.greeter&lt;/code&gt; in the terminal works...sort of. It displays on my desktop underneath all other running applications.&lt;/p&gt;&#xA;&lt;p&gt;I suspect this has to do with me using gdm3 as the default greeter, but I can't change it to io.elementary.greeter using &lt;code&gt;sudo dpkg-reconfigure lightdm&lt;/code&gt;. The option isn't there.&lt;/p&gt;&#xA;&lt;p&gt;What do I do?&lt;/p&gt;&#xA;" OwnerUserId="32088" LastEditorUserId="32088" LastEditDate="2023-12-03T16:12:06.290" LastActivityDate="2023-12-03T16:12:06.290" Title="Installing Pantheon on another system, lock screen doesn't work? / How to switch to io.elementary.greeter from gdm3?" Tags="|greeter|pantheon|lock|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30322" PostTypeId="1" CreationDate="2023-12-06T02:40:57.443" Score="0" ViewCount="20" Body="&lt;p&gt;I installed elementary OS 7.1 alongside Windows on my computer, which has an AMD Radeon 6750 GRE graphics card. The colors appear correct on Windows, but the screen looks purple-ish on elementary OS. Any ideas on how to fix this issue? Appreciate the help.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/mvmgC.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/mvmgC.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="27401" LastActivityDate="2023-12-06T02:40:57.443" Title="The screen appears purple-ish after a fresh installation of elementary OS 7.1 alongside Windows, how can I fix it?" Tags="|display|graphic-drivers|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30323" PostTypeId="1" CreationDate="2023-12-06T16:49:19.500" Score="0" ViewCount="23" Body="&lt;p&gt;I have installed Elementary OS 7.1 Horus and now I would like if possible install dual boot Windows so I tried via Elementary OS live USB to resize (decrease) size via gparted of partition for home but without success. Why is resizing not allowed? I see something like lock on /home partition.&lt;/p&gt;&#xA;" OwnerUserId="28313" LastActivityDate="2023-12-06T16:49:19.500" Title="Resize elementary OS partition to make a space for Windows 11" Tags="|system-installation|disk-management|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30324" PostTypeId="1" CreationDate="2023-12-08T00:21:21.710" Score="0" ViewCount="35" Body="&lt;p&gt;It'll be no shock that some non-elementary OS apps don't look right with the default elementary OS theme. I understand that theming is a Hard Problem™.&lt;/p&gt;&#xA;&lt;p&gt;Sometimes buttons don't look like buttons, or half the buttons have bevels and the other half don't, or UI controls have white text on a grey background color, or sometimes the aesthetics are just bad.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.gnome.org/Apps/Seahorse/&quot; rel=&quot;nofollow noreferrer&quot;&gt;Seahorse&lt;/a&gt;, &lt;a href=&quot;https://bluesabre.org/projects/menulibre&quot; rel=&quot;nofollow noreferrer&quot;&gt;MenuLibre&lt;/a&gt;, and &lt;a href=&quot;https://bluesabre.org/projects/menulibre&quot; rel=&quot;nofollow noreferrer&quot;&gt;Remmina&lt;/a&gt; are just a few examples.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/EmVBP.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/EmVBP.png&quot; alt=&quot;Screenshot of Seahorse (Passwords and Keys) showing default elementary OS theme&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;However, you &lt;em&gt;can&lt;/em&gt; specify a custom theme for a GTK app with &lt;a href=&quot;https://docs.gtk.org/gtk3/running.html#environment-variables&quot; rel=&quot;nofollow noreferrer&quot;&gt;the &lt;code&gt;GTK_THEME&lt;/code&gt; environment variable&lt;/a&gt;, and in many cases using the Adwaita theme fixes the display issues. Thus, this should be possible with a &lt;code&gt;.desktop&lt;/code&gt; file, too; for example, &lt;code&gt;Exec=env GTK_THEME=Adwaita seahorse&lt;/code&gt;.&lt;/p&gt;&#xA;&lt;p&gt;However, annoyingly, this modification doesn't work for certain applications. Seahorse is one. Running &lt;code&gt;env GTK_THEME=Adwaita seahorse&lt;/code&gt; &lt;em&gt;from a terminal&lt;/em&gt; however, has the expected effect.&lt;/p&gt;&#xA;&lt;p&gt;What gives?&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2023-12-09T00:20:09.597" LastActivityDate="2023-12-09T00:20:09.597" Title="Why doesn't `env GTK_THEME=Adwaita` work in .desktop files?" Tags="|themes|gtk|app-shortcuts|desktop-environment|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30325" PostTypeId="2" ParentId="30324" CreationDate="2023-12-08T00:21:21.710" Score="1" Body="&lt;p&gt;&lt;strong&gt;tl;dr&lt;/strong&gt;: comment out the line that starts with &lt;code&gt;DBusActivatable&lt;/code&gt; in the &lt;code&gt;.desktop&lt;/code&gt; file.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://wiki.archlinux.org/title/Desktop_entries#Modify_environment_variables&quot; rel=&quot;nofollow noreferrer&quot;&gt;This section&lt;/a&gt; of the always-reliable Arch wiki article for desktop entries was clutch:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;h3&gt;Modify command line arguments&lt;/h3&gt;&#xA;&lt;p&gt;To change or add the command line arguments, edit the &lt;code&gt;Exec=&lt;/code&gt; line to append the desired options. As an example, with the original line commented out:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;# ~/.local/share/applications/steam.desktop&#xA;...&#xA;# Exec=/usr/bin/steam-runtime %U&#xA;Exec=/usr/bin/steam-runtime -no-browser %U&#xA;...&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Also remove &lt;code&gt;DBusActivatable=true&lt;/code&gt; (or set it to &lt;code&gt;false&lt;/code&gt;) if present as it will cause the Exec line to be ignored.[&lt;a href=&quot;https://docs.gtk.org/gtk3/running.html#environment-variables&quot; rel=&quot;nofollow noreferrer&quot;&gt;2&lt;/a&gt;]&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;That &amp;quot;[2]&amp;quot; refers you to &lt;a href=&quot;https://docs.gtk.org/gtk3/running.html#environment-variables&quot; rel=&quot;nofollow noreferrer&quot;&gt;this section&lt;/a&gt; of the documentation on gtk.org, which elaborates:&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;If &lt;code&gt;DBusActivatable&lt;/code&gt; is &lt;code&gt;true&lt;/code&gt; &lt;strong&gt;and the desktop file name looks like a valid application ID&lt;/strong&gt;, then the &lt;code&gt;Exec&lt;/code&gt; line will be ignored and your application will be started by way of D-Bus activation instead (using the name of the desktop file as the application ID). &lt;em&gt;(emphasis mine)&lt;/em&gt;&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;The bolded part is key: the &lt;code&gt;.desktop&lt;/code&gt; filename in this case is &lt;code&gt;/usr/share/applications/org.gnome.seahorse.Application.desktop&lt;/code&gt;, which, yep, looks like &amp;quot;a valid application ID.&amp;quot; I don't know what all the DBus activation stuff is all about, but who cares. I fixed my problem.&lt;/p&gt;&#xA;&lt;p&gt;Comment out that line with a &lt;code&gt;#&lt;/code&gt; and problem solved. Yes, I do this as root, for reasons beyond the scope of this question, and yes, I'm OK with having to repeat that step if an update to the package ships a new &lt;code&gt;.desktop&lt;/code&gt; file. Those are minor inconveniences.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2023-12-09T00:11:04.087" LastActivityDate="2023-12-09T00:11:04.087" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30326" PostTypeId="1" CreationDate="2023-12-17T20:45:42.183" Score="0" ViewCount="18" Body="&lt;p&gt;Can anyone help me . I already installed Elementary OS but the screen is totally green. I tried to reinstall Nvidia drivers, configure manually the gamma but I didn't get a change. I am a newbie and I don't know to fixed.&#xA;I have a Nvidia rtx 3050 and its connected by hdmi&lt;/p&gt;&#xA;" OwnerUserId="32124" LastActivityDate="2023-12-17T20:45:42.183" Title="the screen on elementary on looks green Help" Tags="|bugs|error|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30327" PostTypeId="1" AcceptedAnswerId="30339" CreationDate="2023-12-27T02:05:33.973" Score="0" ViewCount="238" Body="&lt;p&gt;This problem only happens under a new user profile that I have created. There are three other accounts on the system, both admin and std users where epiphany will render pages correctly. I have tried deleting and recreating the account, no change.&lt;/p&gt;&#xA;&lt;p&gt;Any futher troubleshooting tips appreciated.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2024-01-31T17:31:32.010" Title="Epiphany browser v45.1 always renders blank pages web sites under specific user account" Tags="|epiphany|user|web-browser|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30328" PostTypeId="1" CreationDate="2023-12-27T10:23:20.843" Score="0" ViewCount="4" Body="&lt;p&gt;I am student. I have learned different languages including python, javascript, c++/c also some markup languages. What can i do to increase my skill and also can get experience regarding programming. Please help.&lt;/p&gt;&#xA;" OwnerUserId="32143" LastActivityDate="2023-12-27T10:23:20.843" Title="What can i do to increase my skills in programming?" Tags="|programming|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30329" PostTypeId="1" CreationDate="2023-12-28T19:06:35.310" Score="0" ViewCount="21" Body="&lt;p&gt;I have a strange issue since i've upgraded to elementary os 7.1:&#xA;If an application crashes, it dissapears from the dock (normal), I don't see the process anymore (normal), but it is still displayed...&lt;/p&gt;&#xA;&lt;p&gt;In the pic I've attached, there are 2 crashed apps:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;vscode (installed directly from a deb)&lt;/li&gt;&#xA;&lt;li&gt;insomnia (installed via flatpack)&#xA;Both still have visible windows, but as you can see in the terminal, they don't exist anymore.&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;Is this a known bug? How can I debug / fix this?&lt;/p&gt;&#xA;&lt;p&gt;Thank you!&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/5E0RQ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/5E0RQ.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="32147" LastActivityDate="2023-12-28T19:06:35.310" Title="Dead apps still visible on Elementary 7.1 Horus" Tags="|elementary-project|vscode|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30330" PostTypeId="1" CreationDate="2023-12-31T01:18:27.497" Score="1" ViewCount="10" Body="&lt;p&gt;When I click on a dock icon, sometimes multiple instances of an application start.&#xA;For example:&lt;/p&gt;&#xA;&lt;p&gt;element+   19606   19402  0 Dec29 pts/2    00:00:00 locate blender&#xA;element+   21772       1  0 Dec29 ?        00:00:00 bwrap --args 42 blender&#xA;element+   21783   21772  0 Dec29 ?        00:00:00 bwrap --args 42 blender&#xA;element+   21784   21783  0 Dec29 ?        00:06:10 ./blender&#xA;element+   32891   13701  0 18:14 pts/0    00:00:00 grep --color=auto blender&lt;/p&gt;&#xA;&lt;p&gt;How can I prevent this?&lt;/p&gt;&#xA;&lt;p&gt;ETA:&#xA;Linux Lenovo-Y50-70-9bafae1a 6.2.0-39-generic #40~22.04.1-Ubuntu SMP PREEMPT_DYNAMIC Thu Nov 16 10:53:04 UTC 2 x86_64 x86_64 x86_64 GNU/Linux&lt;/p&gt;&#xA;&lt;p&gt;Blender version 4.0.2&lt;/p&gt;&#xA;" OwnerUserId="32152" LastEditorUserId="32152" LastEditDate="2023-12-31T02:01:49.923" LastActivityDate="2023-12-31T02:01:49.923" Title="Multiple unwanted instances of application start after clicking dock icon" Tags="|applications|desktop|processes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30331" PostTypeId="1" CreationDate="2024-01-06T11:27:50.923" Score="0" ViewCount="23" Body="&lt;p&gt;I can't intall kali linux on my macbook pro retina. I want to have dual boot but my mac doesn't see pendrive with kali. In recovery i can't switch secure boot because there are not option like that.&#xA;Please help&lt;/p&gt;&#xA;" OwnerUserId="32174" LastActivityDate="2024-01-06T11:27:50.923" Title="Problem with installing kali linux on macbook pro retina 2015" Tags="|boot|dual-boot|macbook|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30332" PostTypeId="2" ParentId="23894" CreationDate="2024-01-09T03:57:39.047" Score="0" Body="&lt;p&gt;This work for me.&#xA;AppCentre is showing 2 apps for update.&lt;/p&gt;&#xA;&lt;p&gt;Running flatpak twice. Once as sudo once as a user.&#xA;greg@Elementary-OS:~$ sudo flatpak update&#xA;[sudo] password for greg:&lt;br /&gt;&#xA;Looking for updates…&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                Branch          Op          Remote             Download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;[✓] org.gnome.Evince.Locale           stable          u           appcenter          1.1 kB / 1.5 MB&lt;/li&gt;&#xA;&lt;li&gt;[✓] org.gnome.Evince                  stable          u           appcenter          1.7 MB / 11.0 MB&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Updates complete.&#xA;greg@Elementary-OS:~$ sudo flatpak update&#xA;Looking for updates…&#xA;Nothing to do.&#xA;greg@Elementary-OS:~$ flatpak update&#xA;Looking for updates…&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;    ID                                             Branch                 Op            Remote             Download&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;[✓] org.freedesktop.Platform.GL.default            23.08                  u             flathub            56.5 MB / 162.2 MB&lt;/li&gt;&#xA;&lt;li&gt;[✓] org.freedesktop.Platform.GL.default            23.08-extra            u             flathub            17.7 MB / 162.2 MB&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;&lt;p&gt;Updates complete.&#xA;greg@Elementary-OS:~$&#xA;greg@Elementary-OS:~$ flatpak update&#xA;Looking for updates…&#xA;Nothing to do.&#xA;greg@Elementary-OS:~$&lt;/p&gt;&#xA;" OwnerUserId="32178" LastActivityDate="2024-01-09T03:57:39.047" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30333" PostTypeId="2" ParentId="28813" CreationDate="2024-01-11T22:05:08.977" Score="0" Body="&lt;p&gt;The error message you're seeing is because two &lt;code&gt;/usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service&lt;/code&gt;s are running, and is not alone an indication of a problem.&lt;/p&gt;&#xA;&lt;p&gt;Try this experiment to confirm:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ pkill -ef indicator-application-service&#xA;indicator-appli killed (pid 74400)&#xA;&#xA;$ /usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service &amp;amp;&#xA;[1] 74577&#xA;&#xA;$ /usr/lib/x86_64-linux-gnu/indicator-application/indicator-application-service&#xA;&#xA;(process:74555): indicator-application-service-WARNING **: 17:01:41.731: Unable to get watcher name 'org.kde.StatusNotifierWatcher'&#xA;&#xA;(process:74555): indicator-application-service-WARNING **: 17:01:41.731: Name Lost&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;That said, I'm now using elementary OS 7 (Horus), and both wingpanel-indicator-ayatana from Lafydev's (archived) repo &lt;em&gt;and&lt;/em&gt; wingpanel-indicator-namarupa worked for me.&lt;/p&gt;&#xA;&lt;p&gt;One thing to be careful of is not to forget &lt;code&gt;--prefix=/usr&lt;/code&gt; from the &lt;code&gt;meson build&lt;/code&gt; step in the install instructions of both repos (see my comment above).&lt;/p&gt;&#xA;&lt;p&gt;It seems that &lt;code&gt;libayatana.so&lt;/code&gt; installed by either project &lt;strong&gt;needs to be under &lt;code&gt;/usr&lt;/code&gt;&lt;/strong&gt;, namely in a path like &lt;code&gt;/usr/lib/x86_64-linux-gnu/wingpanel&lt;/code&gt;, depending on your architecture. Without the explicit flag to &lt;code&gt;meson build&lt;/code&gt;, it would be installed to &lt;code&gt;/usr/local&lt;/code&gt; instead. I'm not too interested in the detai/usr/lib/x86_64-linux-gnu/wingpanells, but it probably comes down to some library search path in wingpanel, or some other part of the system.&lt;/p&gt;&#xA;&lt;p&gt;As I recall, as long as the indicator-application-service had already been started (via &lt;code&gt;~/.config/autostart&lt;/code&gt; or whichever method you chose), a reboot wasn't even required. I think the build scripts restart wingpanel for you, or wingpanel restarts itself when it notices the new &lt;code&gt;.so&lt;/code&gt; file—either way it was a very pleasant surprise.&lt;/p&gt;&#xA;" OwnerUserId="13077" LastEditorUserId="13077" LastEditDate="2024-01-11T22:45:13.303" LastActivityDate="2024-01-11T22:45:13.303" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30335" PostTypeId="1" CreationDate="2024-01-16T08:31:20.240" Score="0" ViewCount="19" Body="&lt;p&gt;The title bars look like:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/Y532O.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/Y532O.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;and in the system settings, i have no option for dark theme:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/YMXZ3.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/YMXZ3.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;I was trying to do this: &lt;a href=&quot;https://gist.github.com/fardjad/a1ec470712150e8d3d67693911f5afb8&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://gist.github.com/fardjad/a1ec470712150e8d3d67693911f5afb8&lt;/a&gt;. but just after the first step, this happened:&lt;/p&gt;&#xA;" OwnerUserId="32198" LastActivityDate="2024-01-16T08:31:20.240" Title="whats wrong with my dark theming" Tags="|themes|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30336" PostTypeId="1" CreationDate="2024-01-17T20:24:37.017" Score="0" ViewCount="9" Body="&lt;p&gt;when i changed the &lt;code&gt;VGA&lt;/code&gt; cable, i found that the resolution has been changed, and i can't get resolution options from the display settings because i get message &lt;strong&gt;Unknown Display&lt;/strong&gt;, i think that because the VGA cable, so that the device the computer can't recognize the cable or something like that, i don't know, i hope you can help me in that,&lt;/p&gt;&#xA;&lt;p&gt;[![Screenshot of display settings][1]][1]&#xA;[1]: https://i.stack.imgur.com/ghlvo.png&lt;/p&gt;&#xA;" OwnerUserId="32200" LastActivityDate="2024-01-17T20:24:37.017" Title="i can't get resolution options and i get message: &quot;Unknown Display&quot;" Tags="|display|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30337" PostTypeId="2" ParentId="2519" CreationDate="2024-01-18T21:37:19.947" Score="0" Body="&lt;p&gt;I am still having issues with my usb port and have to use an adapter after one randomly stops working in the middle of using it, no built in keyboard or mouse on this laptop....&lt;/p&gt;&#xA;" OwnerUserId="32208" LastActivityDate="2024-01-18T21:37:19.947" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30338" PostTypeId="1" CreationDate="2024-01-22T21:02:10.093" Score="0" ViewCount="9" Body="&lt;p&gt;I’m on Elementary OS 6.1 on an early 2015 MacBook Pro.&lt;/p&gt;&#xA;&lt;p&gt;I’ve noticed the easiest way to disable trackpad scrolling is to change the scroll method from “Two Finger” to “Edge” in Settings. now, admittedly, “edge” scrolling doesn’t seem to work but it has the net effect of disabling scrolling:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/3oYKA.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3oYKA.jpg&quot; alt=&quot;Settings -&amp;gt; Mouse &amp;amp; Touchpad -&amp;gt; Touchpad&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Unfortunately, I later discovered it disables scrolling where it’s actually useful like in my web browser.&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to disable Trackpad scrolling for just a specific app, like Terminal?&lt;/p&gt;&#xA;&lt;p&gt;I’ve poked around and read lots of posts here, in the Ubuntu stackexchange (like &lt;a href=&quot;https://askubuntu.com/questions/1130149/how-to-disable-horizontal-scrolling-in-ubuntu-18-04-in-terminal&quot;&gt;this one&lt;/a&gt;), and random blog posts (like &lt;a href=&quot;https://www.baeldung.com/linux/enable-disable-touchpad-scrolling-tapping-command-line&quot; rel=&quot;nofollow noreferrer&quot;&gt;this one&lt;/a&gt;) and all of them use the command line to disable scrolling entirely.&lt;/p&gt;&#xA;&lt;p&gt;I’m happy to tinker around on the command line if it means I can restrict/scope disabling scrolling to specific apps.&lt;/p&gt;&#xA;&lt;p&gt;I’m wondering if there is a construct for this we can leverage?&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2024-01-22T21:02:10.093" Title="is there a way to disable touchpad scrolling in just a specific app (eg. Pantheon Terminal)?" Tags="|settings|pantheon-terminal|touchpad|macbook|release-jolnir|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30339" PostTypeId="2" ParentId="30327" CreationDate="2024-01-31T17:31:32.010" Score="0" Body="&lt;p&gt;Found a solution after &lt;em&gt;months&lt;/em&gt; of this issue driving me crazy. I wish I could link the original post to credit the author but I can't find it at the moment.&lt;/p&gt;&#xA;&lt;p&gt;The problem is corrupted flatpak permissions for the app, and the fix is straightforward. Install the &lt;a href=&quot;https://flathub.org/apps/com.github.tchx84.Flatseal&quot; rel=&quot;nofollow noreferrer&quot;&gt;Flatseal&lt;/a&gt; app via AppCenter. Open the app and select the Web (Epiphany) application on left navbar. Now click on the Reset button on the upper right to fix the application permissons.&lt;/p&gt;&#xA;&lt;p&gt;Epiphany should now be able to render pages again.&lt;/p&gt;&#xA;" OwnerUserId="4185" LastActivityDate="2024-01-31T17:31:32.010" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30340" PostTypeId="1" CreationDate="2024-02-01T12:00:41.390" Score="0" ViewCount="6" Body="&lt;p&gt;As the title suggests, any file I download - i.e. an .mp4, or .jpg shows up in Pantheon-Files as a text file.&lt;br /&gt;&#xA;Double click attempts to open said file in Code.&lt;br /&gt;&#xA;Right clicking shows &amp;quot;Open in Code&amp;quot; at the top.&lt;br /&gt;&#xA;The &amp;quot;Open with&amp;quot; menu item provides other installed text editors.&lt;br /&gt;&#xA;The work-around is to close Pantheon-Files and reopen it.&lt;/p&gt;&#xA;" OwnerUserId="32235" LastActivityDate="2024-02-01T12:00:41.390" Title="All downloaded files treated as text files until Pantheon-Files restarted" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30341" PostTypeId="1" AcceptedAnswerId="30342" CreationDate="2024-02-04T01:31:45.410" Score="0" ViewCount="9" Body="&lt;p&gt;I am on Elementary OS 7.1 and I have two administrator users.&lt;/p&gt;&#xA;&lt;p&gt;In session 1, the AppCenter gives me a wide choice of applications.&#xA;In session 2, for a more recently created admin user, the AppCenter gives me little choice.&lt;/p&gt;&#xA;&lt;p&gt;How can I have as many choices of software installations in both sessions ?&#xA;I was thinking both sessions would use the same &lt;strong&gt;/etc/apt/sources&lt;/strong&gt;* ?&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2024-02-08T01:45:03.543" Title="AppCenter shows fewer apps in secondary administrator session. How to synchronize sources?" Tags="|appcenter|software-sources|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30342" PostTypeId="2" ParentId="30341" CreationDate="2024-02-08T01:45:03.543" Score="1" Body="&lt;p&gt;I somehow found the reason of the discrepancy between the 2 appcenter when reading a little phrase on &lt;a href=&quot;https://flatpak.org/setup/elementary%20OS&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://flatpak.org/setup/elementary%20OS&lt;/a&gt;&lt;/p&gt;&#xA;&lt;blockquote&gt;&#xA;&lt;p&gt;Note: After installing one app from a remote like Flathub, all other&#xA;apps from that remote will also automatically show up in AppCenter.&lt;/p&gt;&#xA;&lt;/blockquote&gt;&#xA;&lt;p&gt;So I did install some flatpack using a link to some flatpakref file and then Voila ! all bunch of sotware available in the user 2 AppCenter :)&lt;/p&gt;&#xA;" OwnerUserId="6445" LastActivityDate="2024-02-08T01:45:03.543" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30343" PostTypeId="1" CreationDate="2024-02-15T23:59:47.773" Score="0" ViewCount="18" Body="&lt;p&gt;I'm trying to limit apps for my son (who has a separate standard user account) and when I add Firefox, it automatically adds a bunch of other apps (the Libre office suite, VLC, audacity etc) that I would like him to have access to. I've tried doing it several times. Even if I simply go to settings on my (administrator) account, then add firefox to the listed apps (under &amp;quot;prevent user from using these apps&amp;quot;) or delete the apps I want him to have access to, then close the window, when I open the settings window again, the other apps are there again.&lt;/p&gt;&#xA;&lt;p&gt;I'm using Elementary os 7.1 Horus, installed a few days ago.&lt;/p&gt;&#xA;&lt;p&gt;I have some experience with Linux, but trying to change anything in code is not something I would be comfortable with. If there is a setting I can tweak, a terminal command I can use (the full command or string of commands would be best) or something user-friendly, that would be best. Thank you!&lt;/p&gt;&#xA;" OwnerUserId="32257" LastEditorUserId="32257" LastEditDate="2024-02-16T00:00:56.633" LastActivityDate="2024-02-16T00:00:56.633" Title="Limiting apps limits other apps too" Tags="|settings|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30344" PostTypeId="1" CreationDate="2024-02-24T00:30:10.637" Score="0" ViewCount="4" Body="&lt;p&gt;how to add a new disk to an existing elementary os system?&lt;/p&gt;&#xA;&lt;p&gt;the second question is this:&lt;/p&gt;&#xA;&lt;p&gt;Once I add this new disk, how can I install Steam on it? Can I just put Steam into the main Elementary OS drive and select game installations on the newly added one?&lt;/p&gt;&#xA;" OwnerUserId="32280" LastActivityDate="2024-02-24T00:30:10.637" Title="NEW DISK ELEMENTARY OS" Tags="|disk-management|disk|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30345" PostTypeId="1" CreationDate="2024-02-29T03:10:22.277" Score="1" ViewCount="7" Body="&lt;p&gt;I tried to install eOS 7.1 on a Mac Mini 2011 with a fresh SSD from USB stick.&lt;/p&gt;&#xA;&lt;p&gt;Select &amp;quot;erase and install&amp;quot;, select disk (SSD), no encryption, start.&#xA;After 20% an error message comes:&#xA;&amp;quot;the device may not restart properly&amp;quot;.&lt;/p&gt;&#xA;&lt;p&gt;In detail, there are at the end some error messages about partitions. I don't understand this correctly.&lt;/p&gt;&#xA;&lt;p&gt;How can I recognize and resolve the error?&lt;/p&gt;&#xA;" OwnerUserId="31867" LastEditorUserId="5123" LastEditDate="2024-03-01T18:19:26.410" LastActivityDate="2024-03-01T18:19:26.410" Title="Error installing eOS 7.1 on Mac Mini 2011" Tags="|system-installation|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30346" PostTypeId="1" CreationDate="2024-02-29T23:41:14.040" Score="0" ViewCount="10" Body="&lt;p&gt;Running Horus 7.1, I just download the lastest system updates in AppCenter and then restarted when asked, but that just brought me back to my login screen without installing them. After a few minutes it asks me to restart again, but it still doesn't install anything. What do I do now?&lt;/p&gt;&#xA;" OwnerUserId="19874" LastActivityDate="2024-02-29T23:41:14.040" Title="system updates not installing upon reboot" Tags="|updates|horus|" AnswerCount="0" CommentCount="3" ContentLicense="CC BY-SA 4.0" />
  <row Id="30347" PostTypeId="1" CreationDate="2024-03-04T18:46:21.563" Score="0" ViewCount="6" Body="&lt;p&gt;Nitpicking I know, but since upgrading to 7.1, Files has started showing partitions with drive model numbers like this:&#xA;&lt;a href=&quot;https://i.stack.imgur.com/3ivEf.png&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/3ivEf.png&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Anyone know how to get rid of this irrelevant and screen estate gobbling irritation?&lt;/p&gt;&#xA;" OwnerUserId="20805" LastActivityDate="2024-03-04T18:46:21.563" Title="Remove drive model from partition labels in left pane" Tags="|pantheon-files|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30348" PostTypeId="1" CreationDate="2024-03-04T20:16:01.700" Score="0" ViewCount="5" Body="&lt;p&gt;I have &lt;code&gt;Android Studio&lt;/code&gt; and &lt;code&gt;IntelliJ Idea&lt;/code&gt; installed, and their icons at both the &lt;code&gt;dock&lt;/code&gt; and the &lt;code&gt;Applications Menu&lt;/code&gt; seem to work just fine, however, when &lt;code&gt;Alt + Tab&lt;/code&gt; they both have this default icon of a star with purple background.&#xA;I came across &lt;a href=&quot;https://elementaryos.stackexchange.com/questions/30153/star-in-purple-box-icon-for-downloaded-apps-while-switching-tabs-using-alt-t&quot;&gt;this&lt;/a&gt; thread which suggested using &lt;code&gt;AppEditor&lt;/code&gt;, but to no avail. I've even tried to set the icon to both the &lt;code&gt;png&lt;/code&gt; and &lt;code&gt;svg&lt;/code&gt; format bundled with &lt;code&gt;Android Studio&lt;/code&gt; and even tried the default ones offered by &lt;code&gt;AppEditor&lt;/code&gt;, but none seemed to have any effect whatsoever. I've also tried manually editing the desktop launcher config file, but it still didn't work.&lt;/p&gt;&#xA;&lt;p&gt;Those default icons make windows blend in when alt-tabbing. Is there any way around it? Thanks&lt;/p&gt;&#xA;" OwnerUserId="24570" LastEditorUserId="24570" LastEditDate="2024-03-04T20:22:06.757" LastActivityDate="2024-03-04T20:22:06.757" Title="Purple icon containing a star for Android Studio and IntelliJ IDEA's show" Tags="|desktop|java|android-studio|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30349" PostTypeId="1" CreationDate="2024-03-07T07:38:25.363" Score="0" ViewCount="20" Body="&lt;p&gt;is it possible to fix Networkproblem, emerge WLAN-connection in Horus 7.1 (vers.6.5)?&lt;/p&gt;&#xA;&lt;p&gt;Thanks&lt;/p&gt;&#xA;" OwnerUserId="33316" LastActivityDate="2024-04-06T19:05:15.667" Title="elementaryOS update Horus 7.1 (to version 6.5) Macbook Air : WLAN no longer available in Network" Tags="|wifi|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30350" PostTypeId="2" ParentId="30349" CreationDate="2024-03-07T16:48:31.817" Score="0" Body="&lt;p&gt;Wifi-Problem resolved, thanks to: &lt;a href=&quot;https://elementaryos.stackexchange.com/users/578/lemonslice&quot;&gt;https://elementaryos.stackexchange.com/users/578/lemonslice&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="33316" LastActivityDate="2024-03-07T16:48:31.817" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30351" PostTypeId="1" CreationDate="2024-03-08T03:23:37.590" Score="0" ViewCount="6" Body="&lt;p&gt;I’m running elementaryOS 6.1 and so close to getting automounting my encrypted partition on boot and throwing in the towel.&lt;/p&gt;&#xA;&lt;p&gt;first some context, I have /home in an encrypted partition that as a workaround, I can mount by entering its password on boot if I have this in my /etc/crypttab:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;home UUID=&amp;lt;UUID of encrypted home partition&amp;gt; none luks&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I’ve been using my system this way for years and now that I am transitioning this build to a headless server, it won’t work to have to enter a password all the time.&lt;/p&gt;&#xA;&lt;p&gt;This is the line in /etc/crypttab that is not working as intended:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;home UUID=&amp;lt;UUID of encrypted home partition&amp;gt; /dev/disk/by-uuid/&amp;lt;UUID of boot partition&amp;gt;:/keyfile luks,keyscript=/lib/cryptsetup/scripts/passdev&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I set everything up using &lt;a href=&quot;https://askubuntu.com/a/997668/1034628&quot;&gt;this answer&lt;/a&gt;.&lt;/p&gt;&#xA;&lt;p&gt;I found an &lt;a href=&quot;https://askubuntu.com/questions/59487/how-to-configure-lvm-luks-to-autodecrypt-partition/656889#656889&quot;&gt;auto_unlocker.sh script&lt;/a&gt; that allows me to put this in my /etc/crypttab instead:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;home UUID=&amp;lt;UUID of encrypted home partition&amp;gt; /dev/disk/by-uuid/&amp;lt;UUID of boot partition of extern micro SD&amp;gt;:/crypt/keyfile luks,keyscript=/lib/cryptsetup/scripts/auto_unlocker.sh&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I’m clear it works because if I execute:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo cryptdisks_start home&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;This creates /dev/mapper/home without requesting a password if my micro SD with the key is plugged in (yeay!) and asks for a password if the micro SD is not plugged in.&lt;/p&gt;&#xA;&lt;p&gt;What I’ve also confirmed is once I manually run the above command and reissue a request to mount all disks:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo mount -a&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I exit my console tty and return to the graphical login screen and because /home is mounted, it is now able to log into the desktop.&lt;/p&gt;&#xA;&lt;p&gt;my current hypothesis is my encrypted home is not mounted to /dev/mapper/home before fstab wants to mount it to /home.&lt;/p&gt;&#xA;&lt;p&gt;I’ve put asterisks (*) on the relevant lines from dmesg:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;[    3.812316] systemd[1]: Created slice system-modprobe.slice.&#xA;[    3.812621] systemd[1]: Created slice Cryptsetup Units Slice.&#xA;[    3.812883] systemd[1]: Created slice system-systemd\x2dfsck.slice.&#xA;[    3.813146] systemd[1]: Created slice User and Session Slice.&#xA;[    3.813203] systemd[1]: Started Forward Password Requests to Wall Directory Watch.&#xA;[    3.813376] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.&#xA;[    3.813424] systemd[1]: Reached target User and Group Name Lookups.&#xA;[    3.813435] systemd[1]: Reached target Remote File Systems.&#xA;[    3.813443] systemd[1]: Reached target Slices.&#xA;[    3.813454] systemd[1]: Reached target Swap.&#xA;[    3.813525] systemd[1]: Listening on Device-mapper event daemon FIFOs.&#xA;[    3.813614] systemd[1]: Listening on LVM2 poll daemon socket.&#xA;[    3.813972] systemd[1]: Listening on Syslog Socket.&#xA;[    3.814047] systemd[1]: Listening on fsck to fsckd communication Socket.&#xA;[    3.814086] systemd[1]: Listening on initctl Compatibility Named Pipe.&#xA;[    3.814235] systemd[1]: Listening on Journal Audit Socket.&#xA;[    3.814305] systemd[1]: Listening on Journal Socket (/dev/log).&#xA;[    3.814389] systemd[1]: Listening on Journal Socket.&#xA;[    3.814467] systemd[1]: Listening on udev Control Socket.&#xA;[    3.814518] systemd[1]: Listening on udev Kernel Socket.&#xA;[    3.815320] systemd[1]: Mounting Huge Pages File System...&#xA;[    3.816268] systemd[1]: Mounting POSIX Message Queue File System...&#xA;&#xA;[*   3.817595] systemd[1]: Mounting /run/systemd/cryptsetup/keydev-home...&#xA;&#xA;[    3.818955] systemd[1]: Mounting Kernel Debug File System...&#xA;[    3.820163] systemd[1]: Mounting Kernel Trace File System...&#xA;[    3.821854] systemd[1]: Starting Journal Service...&#xA;[    3.823162] systemd[1]: Starting Availability of block devices...&#xA;[    3.824662] systemd[1]: Starting Set the console keyboard layout...&#xA;[    3.826019] systemd[1]: Starting Create list of static device nodes for the current kernel...&#xA;[    3.827930] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...&#xA;[    3.829155] systemd[1]: Starting Load Kernel Module chromeos_pstore...&#xA;[    3.829204] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.&#xA;[    3.830604] systemd[1]: Starting Load Kernel Module efi_pstore...&#xA;[    3.832400] systemd[1]: Starting Load Kernel Module pstore_blk...&#xA;[    3.833756] systemd[1]: Starting Load Kernel Module pstore_zone...&#xA;[    3.835010] systemd[1]: Starting Load Kernel Module ramoops...&#xA;[    3.835578] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.&#xA;[    3.837457] systemd[1]: Starting Load Kernel Modules...&#xA;[    3.839098] systemd[1]: Starting Remount Root and Kernel File Systems...&#xA;[    3.842890] systemd[1]: Starting udev Coldplug all Devices...&#xA;[    3.844261] systemd[1]: Starting Uncomplicated firewall...&#xA;[    3.846456] systemd[1]: Mounted Huge Pages File System.&#xA;[    3.846639] systemd[1]: Mounted POSIX Message Queue File System.&#xA;&#xA;[*   3.846776] systemd[1]: run-systemd-cryptsetup-keydev\x2dhome.mount: Mount process exited, code=exited, status=32/n/a&#xA;[*   3.846782] systemd[1]: run-systemd-cryptsetup-keydev\x2dhome.mount: Failed with result 'exit-code'.&#xA;[*   3.847546] systemd[1]: Failed to mount /run/systemd/cryptsetup/keydev-home.&#xA;[*   3.847696] systemd[1]: Dependency failed for Cryptography Setup for home.&#xA;[*   3.847771] systemd[1]: Dependency failed for Local Encrypted Volumes.&#xA;[*   3.847837] systemd[1]: cryptsetup.target: Job cryptsetup.target/start failed with result 'dependency'.&#xA;[*   3.847849] systemd[1]: Dependency failed for /dev/mapper/home.&#xA;[*   3.847912] systemd[1]: Dependency failed for /home.&#xA;[*   3.847995] systemd[1]: Dependency failed for Local File Systems.&#xA;[*   3.848056] systemd[1]: local-fs.target: Job local-fs.target/start failed with result 'dependency'.&#xA;[*   3.848078] systemd[1]: home.mount: Job home.mount/start failed with result 'dependency'.&#xA;[*   3.848086] systemd[1]: Dependency failed for File System Check on /dev/mapper/home.&#xA;[*   3.848158] systemd[1]: systemd-fsck@dev-mapper-home.service: Job systemd-fsck@dev-mapper-home.service/start failed with result 'dependency'.&#xA;[*   3.848165] systemd[1]: dev-mapper-home.device: Job dev-mapper-home.device/start failed with result 'dependency'.&#xA;[*   3.848170] systemd[1]: systemd-cryptsetup@home.service: Job systemd-cryptsetup@home.service/start failed with result 'dependency'.&#xA;&#xA;[    3.848239] systemd[1]: Unnecessary job for /dev/disk/by-uuid/d9bdcdff-ae52-4ddc-83de-6208cb1610db was removed.&#xA;[    3.848357] systemd[1]: Mounted Kernel Debug File System.&#xA;[    3.848496] systemd[1]: Mounted Kernel Trace File System.&#xA;[    3.851407] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro. Quota mode: none.&#xA;[    3.853684] systemd[1]: Finished Availability of block devices.&#xA;[    3.856035] systemd[1]: Finished Create list of static device nodes for the current kernel.&#xA;[    3.856463] systemd[1]: modprobe@pstore_zone.service: Succeeded.&#xA;[    3.856960] systemd[1]: Finished Load Kernel Module pstore_zone.&#xA;[    3.857967] systemd[1]: Finished Remount Root and Kernel File Systems.&#xA;[    3.859400] systemd[1]: Finished Uncomplicated firewall.&#xA;&#xA;[*   3.859607] systemd[1]: Reached target Block Device Preparation for /dev/mapper/home.&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Anyone have any ideas why my encrypted partition is failing to mount as /home on boot?&lt;/p&gt;&#xA;&lt;p&gt;Is there any way to check and/or define that /home depends on /dev/mapper/home and ensure they are created in the correct order?&lt;/p&gt;&#xA;" OwnerUserId="20912" LastActivityDate="2024-03-08T03:23:37.590" Title="automounting encrypted partition on boot: how to make init parse crypttab before fstab?" Tags="|boot|mount|encryption|release-jolnir|home|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30352" PostTypeId="1" CreationDate="2024-03-08T09:31:25.703" Score="0" ViewCount="13" Body="&lt;p&gt;I'm a tech newbie user who's just started using Horus and I'm loving it so far, but I had a warning pop up saying that I'm running out of disc space on /boot. Since I know enough to enter commands in the terminal but not to tinker with an OS, I tried this solution (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4064/low-disk-space-on-boot-warning&quot;&gt;Low Disk Space on boot warning&lt;/a&gt;) but it didn't work. I got this result: 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&lt;/p&gt;&#xA;&lt;p&gt;I've looked into other entries in this forum but balk at things that are over my head, like these:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/17359/low-disk-space-on-file-system&quot;&gt;Low disk space on file system&lt;/a&gt;&#xA;&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/3373/elementary-os-disk-space-getting-low&quot;&gt;elementary OS disk space getting low&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Any ideas what to do?&lt;/p&gt;&#xA;&lt;p&gt;Update: I tried Bleachbit to free up space but still got an error message saying I have even less space on my /boot folder now, so I tried Bleachbit again. It hung up on me, though, so I aborted the operation (it was able to free up over 30 GB of space, though) and just in case it worked I tried this solution again (&lt;a href=&quot;https://elementaryos.stackexchange.com/questions/4064/low-disk-space-on-boot-warning&quot;&gt;Low Disk Space on boot warning&lt;/a&gt;) and this time got this:&lt;/p&gt;&#xA;&lt;p&gt;sudo apt-get autoremove&lt;/p&gt;&#xA;&lt;p&gt;Reading package lists... Done&#xA;Building dependency tree... Done&#xA;Reading state information... Done&#xA;0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.&#xA;1 not fully installed or removed.&#xA;After this operation, 0 B of additional disk space will be used.&#xA;Setting up linux-firmware (20220329.git681281e4-0ubuntu3.29) ...&#xA;update-initramfs: Generating /boot/initrd.img-6.5.0-25-generic&#xA;I: The initramfs will attempt to resume from /dev/dm-2&#xA;I: (/dev/mapper/data-swap)&#xA;I: Set the RESUME variable to override this.&#xA;zstd: error 25 : Write error : No space left on device (cannot write compressed block)&#xA;E: mkinitramfs failure zstd -q -1 -T0 25&#xA;update-initramfs: failed for /boot/initrd.img-6.5.0-25-generic with 1.&#xA;dpkg: error processing package linux-firmware (--configure):&#xA;installed linux-firmware package post-installation script subprocess returned error exit status 1&#xA;Errors were encountered while processing:&#xA;linux-firmware&#xA;E: Sub-process /usr/bin/dpkg returned an error code (1)&lt;/p&gt;&#xA;&lt;p&gt;Help, please?&lt;/p&gt;&#xA;" OwnerUserId="33317" LastEditorUserId="33317" LastEditDate="2024-03-12T09:37:43.353" LastActivityDate="2024-03-31T15:56:16.490" Title="Low disc space on /boot (Horus 7.1)" Tags="|horus|hdd|" AnswerCount="1" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30353" PostTypeId="2" ParentId="25580" CreationDate="2024-03-08T16:27:14.240" Score="0" Body="&lt;p&gt;I have made it on macbook using definition of new shortcus using instead of print press &amp;quot;eject&amp;quot; because I used to have DVD, but now have tho drives in my mac. This works.. Hotkey shift plus eject makes screenshots&lt;/p&gt;&#xA;" OwnerUserId="33319" LastActivityDate="2024-03-08T16:27:14.240" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30354" PostTypeId="1" CreationDate="2024-03-09T09:52:38.963" Score="0" ViewCount="67" Body="&lt;p&gt;After installing Elementary OS 7.1 (Hour), there is no wired or WIFI access to the Internet. EOS7.1 on the laptop is the second operating system.&lt;/p&gt;&#xA;&lt;p&gt;If you try to connect a wired cable, the Network slider is activated, but there is no Internet access.&lt;/p&gt;&#xA;&lt;p&gt;I tried to solve this problem, but I didn't get any results.&#xA;I would appreciate your help!&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;uname -r&#xA;6.2.0-33-generic&#xA;&#xA;**Laptop equipment:**&#xA;Neobihier&#xA;Intel Core i7-1195G7 (2.9 GHz),&#xA;RAM 64 GB,&#xA;SSD 2048 GB,&#xA;NVIDIA GeForce MX450 (2 GB)&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;I am attaching a photo from the laptop screen.&#xA;&lt;a href=&quot;https://i.stack.imgur.com/4LFUd.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/4LFUd.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;===&lt;/p&gt;&#xA;&lt;p&gt;!!! UPD&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled the OS. I thought the problem was an incorrect installation. But after installation the WiFi module disappeared. The wired connection setup also disappeared. Strange.&lt;/p&gt;&#xA;&lt;p&gt;Could you help me?&lt;/p&gt;&#xA;&lt;p&gt;I attached a photo of the screen.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/vcQeF.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/vcQeF.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/6s3QZ.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/6s3QZ.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="33322" LastEditorUserId="33322" LastEditDate="2024-03-09T15:10:17.630" LastActivityDate="2024-03-12T06:40:09.957" Title="No wired or wireless connection after installation" Tags="|wifi|system|networking|drivers|internet|" AnswerCount="3" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30355" PostTypeId="2" ParentId="30354" CreationDate="2024-03-10T20:31:06.760" Score="0" Body="&lt;p&gt;I had the same issue yesterday. This happened after I did an update, not sure which one. You need to reinstall the linux-modules-extra package.&lt;/p&gt;&#xA;&lt;p&gt;Download this using a different system and save it to a USB:&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;http://security.ubuntu.com/ubuntu/pool/main/l/linux-hwe-6.2/linux-modules-extra-6.2.0-33-generic_6.2.0-33.33%7E22.04.1_amd64.deb&quot; rel=&quot;nofollow noreferrer&quot;&gt;http://security.ubuntu.com/ubuntu/pool/main/l/linux-hwe-6.2/linux-modules-extra-6.2.0-33-generic_6.2.0-33.33~22.04.1_amd64.deb&lt;/a&gt;&lt;/p&gt;&#xA;&lt;p&gt;Copy it from the USB to the broken system and install it:&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;sudo dpkg -i linux-modules-extra-6.2.0-33-generic_6.2.0-33.33~22.04.1_amd64.deb&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;&lt;p&gt;Reboot and you should be good.&lt;/p&gt;&#xA;" OwnerUserId="33325" LastActivityDate="2024-03-10T20:31:06.760" CommentCount="1" ContentLicense="CC BY-SA 4.0" />
  <row Id="30357" PostTypeId="1" CreationDate="2024-03-10T22:17:00.877" Score="0" ViewCount="9" Body="&lt;p&gt;If I install the Nimbus application through the AppCenter it does not work, does not show any data. If I build from source and run it there are no issues. The AppCenter says it is version 1.10 and the source is also 1.10 so I am not sure what the issue is. A couple other people are having the same issue:  &lt;a href=&quot;https://github.com/danirabbit/nimbus/issues/141s&quot; rel=&quot;nofollow noreferrer&quot;&gt;https://github.com/danirabbit/nimbus/issues/141s&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="33325" LastActivityDate="2024-03-10T22:17:00.877" Title="No data from Nimbus weather application" Tags="|appcenter|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30358" PostTypeId="2" ParentId="30354" CreationDate="2024-03-11T07:10:55.607" Score="0" Body="&lt;p&gt;Thank you for your help! But my problem was not solved.&lt;/p&gt;&#xA;&lt;p&gt;Let me add, maybe the problem is that I have to boot the OS through recovery mode. And therefore it does not provide the opportunity to load all modules/drivers.&lt;/p&gt;&#xA;&lt;p&gt;I can't directly boot into the OS. I have an ACPI BIOS Error (bug): Could not resolve symbol. And after this error &amp;quot;Power down&amp;quot;. There is no update for BIOS.&lt;/p&gt;&#xA;&lt;p&gt;&lt;a href=&quot;https://i.stack.imgur.com/hDhcY.jpg&quot; rel=&quot;nofollow noreferrer&quot;&gt;&lt;img src=&quot;https://i.stack.imgur.com/hDhcY.jpg&quot; alt=&quot;enter image description here&quot; /&gt;&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="33322" LastActivityDate="2024-03-11T07:10:55.607" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30360" PostTypeId="2" ParentId="22071" CreationDate="2024-03-11T10:04:18.397" Score="0" Body="&lt;p&gt;The solution i found:&lt;/p&gt;&#xA;&lt;ol&gt;&#xA;&lt;li&gt;Open up 'synaptic' with $&amp;gt; sudo synaptic.&lt;/li&gt;&#xA;&lt;li&gt;mark for complete removal of 'openssh-client'&lt;/li&gt;&#xA;&lt;li&gt;apply changes to remove this package.&lt;/li&gt;&#xA;&lt;li&gt;mark for installation the ubunutu 'openssh-server' which includes a number of SSH tools in the same package as well as the client. Solved! :-/&lt;/li&gt;&#xA;&lt;/ol&gt;&#xA;" OwnerUserId="20257" LastActivityDate="2024-03-11T10:04:18.397" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30361" PostTypeId="2" ParentId="30354" CreationDate="2024-03-12T06:40:09.957" Score="0" Body="&lt;p&gt;Magic!&lt;/p&gt;&#xA;&lt;p&gt;I reinstalled the OS, connected the Internet via a USB modem. Wired Internet appeared.&lt;/p&gt;&#xA;&lt;p&gt;Now the problem is with the Internet via WiFi.&lt;/p&gt;&#xA;" OwnerUserId="33322" LastActivityDate="2024-03-12T06:40:09.957" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30362" PostTypeId="2" ParentId="7413" CreationDate="2024-03-18T12:35:54.690" Score="0" Body="&lt;p&gt;This worked for me.  Thank you very much.&lt;/p&gt;&#xA;" OwnerUserId="33347" LastActivityDate="2024-03-18T12:35:54.690" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30363" PostTypeId="1" CreationDate="2024-03-19T21:29:39.997" Score="0" ViewCount="10" Body="&lt;p&gt;&lt;strong&gt;Firstly&lt;/strong&gt;, my system components:&lt;/p&gt;&#xA;&lt;ul&gt;&#xA;&lt;li&gt;Processor: Intel(R) Core(TM) i7-10700F CPU @ 2.90GHz 2.90 GHz&lt;/li&gt;&#xA;&lt;li&gt;Installed RAM: 64.0 GB (63.9 GB usable)&lt;/li&gt;&#xA;&lt;li&gt;System type: 64-bit operating&#xA;system, x64-based processor&lt;/li&gt;&#xA;&lt;li&gt;Graphics Card: MSI GeForce RTX 4090 24GB&#xA;GDRR6X&lt;/li&gt;&#xA;&lt;/ul&gt;&#xA;&lt;p&gt;&lt;strong&gt;Secondly&lt;/strong&gt;, the issue is I have been trying to install elementary OS locally on my machine for a week now and whether I use safe mode or does not matter I cannot get past this elementary OS Horus login and password screen and it was not provided to me when I download in the ISO from the website.&lt;/p&gt;&#xA;&lt;p&gt;I also keep getting this error: &lt;strong&gt;nouveau 0000:01:00.0: unknown chipset (1940000a1)&lt;/strong&gt;&lt;/p&gt;&#xA;&lt;p&gt;Is there a way to solve this? I really don't want to use any other distro of Linux.&lt;/p&gt;&#xA;" OwnerUserId="33353" LastEditorUserId="33353" LastEditDate="2024-03-19T21:32:21.750" LastActivityDate="2024-03-21T02:42:19.583" Title="What is the Login and Password to install Elementary OS?" Tags="|release-odin|" AnswerCount="1" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30364" PostTypeId="1" CreationDate="2024-03-21T02:39:08.727" Score="0" ViewCount="13" Body="&lt;p&gt;I am trying to save space from my device and I was running out of memory despite cleaning &lt;code&gt;apt&lt;/code&gt; and &lt;code&gt;snap&lt;/code&gt;. When I checked &lt;code&gt;flatpak&lt;/code&gt;, I discovered that it unnecessarily uses huge amount of memory which I want to reclaim. Are all &lt;code&gt;io.elementary.Platform&lt;/code&gt; packages, installed by elementary OS, necessary? If not, Should I remove anything below &lt;code&gt;7.2&lt;/code&gt;?&lt;/p&gt;&#xA;&lt;pre&gt;&lt;code&gt;$ flatpak list --all --show-details&#xA;… … … Version  Branch      Arch   Origin      Installation Ref                                                     Active commit Latest commit Installed size …&#xA;… … … 1.1.7    stable      x86_64 appcenter   user         com.github.alexkdeveloper.raddiola/x86_64/stable        3282b8e4df42  -             318.0 kB       …&#xA;…  …          stable      x86_64 appcenter   user         com.github.alexkdeveloper.raddiola.Locale/x86_64/stable e3a21dfed203  -             512 bytes      …&#xA;… … … 1.1.5    stable      x86_64 appcenter   user         com.github.donadigo.appeditor/x86_64/stable             ad749df06aae  -               8.3 MB       …&#xA;…  …          stable      x86_64 appcenter   user         com.github.donadigo.appeditor.Locale/x86_64/stable      ec33065d9a6b  -             512 bytes      …&#xA;…  …          6           x86_64 appcenter   system       io.elementary.Platform/x86_64/6                         dc72c0942e0d  -               1.0 GB       …&#xA;…  …          6.1         x86_64 appcenter   system       io.elementary.Platform/x86_64/6.1                       be2732301d0d  -             812.0 MB       …&#xA;…  …          7           x86_64 appcenter   system       io.elementary.Platform/x86_64/7                         10334eac481d  -             806.1 MB       …&#xA;…  …          7           x86_64 appcenter   user         io.elementary.Platform/x86_64/7                         10334eac481d  -             806.1 MB       …&#xA;…  …          7.1         x86_64 appcenter   system       io.elementary.Platform/x86_64/7.1                       4f56a6ec546e  -             900.1 MB       …&#xA;…  …          7.2         x86_64 appcenter   system       io.elementary.Platform/x86_64/7.2                       c84622ed58e4  -             897.7 MB       …&#xA;…  …          6           x86_64 appcenter   system       io.elementary.Platform.Locale/x86_64/6                  b7a3eafc152d  -               1.3 GB       …&#xA;…  …          6.1         x86_64 appcenter   system       io.elementary.Platform.Locale/x86_64/6.1                970a9ea4ad6a  -               1.4 GB       …&#xA;…  …          7           x86_64 appcenter   system       io.elementary.Platform.Locale/x86_64/7                  0d26b62574d7  -             188.6 MB       …&#xA;…  …          7           x86_64 appcenter   user         io.elementary.Platform.Locale/x86_64/7                  0d26b62574d7  -             512 bytes      …&#xA;…  …          7.1         x86_64 appcenter   system       io.elementary.Platform.Locale/x86_64/7.1                c61739f7e4e6  -              71.2 kB       …&#xA;…  …          7.2         x86_64 appcenter   system       io.elementary.Platform.Locale/x86_64/7.2                73edf646fc24  -              71.2 kB       …&#xA;… … … 2.0.2    stable      x86_64 appcenter   system       io.elementary.calculator/x86_64/stable                  bb48fdc8e1ae  -             695.8 kB       …&#xA;…  …          stable      x86_64 appcenter   system       io.elementary.calculator.Locale/x86_64/stable           c8bbbb46218c  -             192.5 kB       …&#xA;… … … 6.2.2    stable      x86_64 appcenter   system       io.elementary.camera/x86_64/stable                      72401c2f87b4  -               1.2 MB       …&#xA;…  …          stable      x86_64 appcenter   system       io.elementary.camera.Locale/x86_64/stable               726d558e3816  -             100.9 kB       …&#xA;… … … 2.4.4    stable      x86_64 appcenter   system       io.elementary.capnet-assist/x86_64/stable               df11efbc663f  -             655.4 kB       …&#xA;…  …          stable      x86_64 appcenter   system       io.elementary.capnet_assist.Locale/x86_64/stable        59d93f9105f5  -             150.5 kB       …&#xA;… … … 6.0.4    stable      x86_64 appcenter   system       io.elementary.screenshot/x86_64/stable                  889115dc05b3  -             732.7 kB       …&#xA;…  …          stable      x86_64 appcenter   system       io.elementary.screenshot.Locale/x86_64/stable           d9ddacb3aeca  -             512 bytes      …&#xA;… … … 1.4.16   stable      x86_64 flathub     system       md.obsidian.Obsidian/x86_64/stable                      998272fadebf  -             586.3 MB       …&#xA;…  …          stable      x86_64 flathub     system       md.obsidian.Obsidian.Locale/x86_64/stable               7b041d380f30  -             512 bytes      …&#xA;… … … 22.08.19 22.08       x86_64 flathub     system       org.freedesktop.Platform/x86_64/22.08                   12e6f0416b1a  -             569.0 MB       …&#xA;… … … 23.08.6  23.08       x86_64 flathub     system       org.freedesktop.Platform/x86_64/23.08                   75d6f5f7daf4  -             591.3 MB       …&#xA;… … … 21.3.9   21.08       x86_64 freedesktop system       org.freedesktop.Platform.GL.default/x86_64/21.08        307acd90a918  -             381.6 MB       …&#xA;… … … 23.1.9   22.08       x86_64 flathub     system       org.freedesktop.Platform.GL.default/x86_64/22.08        160710122096  -             424.1 MB       …&#xA;… … … 23.1.9   22.08-extra x86_64 flathub     system       org.freedesktop.Platform.GL.default/x86_64/22.08-extra  8311dc516d6b  -             424.1 MB       …&#xA;… … … 23.2.1   23.08       x86_64 flathub     system       org.freedesktop.Platform.GL.default/x86_64/23.08        dcbdd21fd79e  -             484.9 MB       …&#xA;… … … 23.2.1   23.08-extra x86_64 flathub     system       org.freedesktop.Platform.GL.default/x86_64/23.08-extra  508ed21fd9fe  -             484.9 MB       …&#xA;…  …          22.08       x86_64 flathub     system       org.freedesktop.Platform.Locale/x86_64/22.08            8f2876a9b5bc  -              79.9 kB       …&#xA;…  …          23.08       x86_64 flathub     system       org.freedesktop.Platform.Locale/x86_64/23.08            18905a9f143d  -               9.2 kB       …&#xA;…  …          21.08       x86_64 flathub     system       org.freedesktop.Platform.VAAPI.Intel/x86_64/21.08       2e4d954e4ca3  -              46.5 MB       …&#xA;…  …          22.08       x86_64 flathub     system       org.freedesktop.Platform.VAAPI.Intel/x86_64/22.08       a712cc35b56d  -              46.5 MB       …&#xA;…  …          23.08       x86_64 flathub     system       org.freedesktop.Platform.VAAPI.Intel/x86_64/23.08       6197e42f4e5e  -              46.5 MB       …&#xA;… … … 2.1.0    2.0         x86_64 flathub     system       org.freedesktop.Platform.openh264/x86_64/2.0            bdc77b1e945d  -             778.2 kB       …&#xA;… … … 2.1.0    2.2.0       x86_64 flathub     system       org.freedesktop.Platform.openh264/x86_64/2.2.0          bf24f23f3ba3  -             790.0 kB       …&#xA;…  …          stable      x86_64 flathub     system       org.gnome.BreakTimer.Locale/x86_64/stable               b2336e2e466f  -             512 bytes      …&#xA;… … … 45.0     stable      x86_64 appcenter   system       org.gnome.Evince/x86_64/stable                          ec578375680e  -              31.1 MB       …&#xA;…  …          stable      x86_64 appcenter   system       org.gnome.Evince.Locale/x86_64/stable                   bc613899ccca  -               3.9 MB       …&#xA;… … … 43.0     stable      x86_64 appcenter   system       org.gnome.FileRoller/x86_64/stable                      823503629173  -              28.6 MB       …&#xA;…  …          stable      x86_64 appcenter   system       org.gnome.FileRoller.Locale/x86_64/stable               492a298a998a  -               2.6 MB       …&#xA;… … …          43          x86_64 flathub     system       org.gnome.Platform/x86_64/43                            72c5f3d0de59  -             863.8 MB       …&#xA;…  …          43          x86_64 flathub     system       org.gnome.Platform.Locale/x86_64/43                     910fb134dfb9  -              71.2 kB       …&#xA;&lt;/code&gt;&lt;/pre&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2024-03-27T06:53:02.990" Title="Why elementary platform is installed multiple times? Should I remove all oldest?" Tags="|flatpak|" AnswerCount="2" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30365" PostTypeId="2" ParentId="30363" CreationDate="2024-03-21T02:42:19.583" Score="0" Body="&lt;p&gt;You have two options. Enter root mode from &lt;code&gt;grub&lt;/code&gt; and try to change the password as root. or simply reinstall the OS especially that you didn't install anything yet.&lt;/p&gt;&#xA;&lt;p&gt;As for NVIDIA. This is a Linux question independent form this question and platform.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2024-03-21T02:42:19.583" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30366" PostTypeId="2" ParentId="30302" CreationDate="2024-03-21T02:49:48.020" Score="0" Body="&lt;p&gt;Easiest solution is to use open source drivers &lt;code&gt;nouveau&lt;/code&gt; and don't use NVIDIA proprietary drivers if you want the sleep option. If you want to keep both, you can look up for how to do it as I have seen people configuring &lt;code&gt;systemd&lt;/code&gt; a lot just to achieve both.&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2024-03-21T02:49:48.020" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30367" PostTypeId="1" CreationDate="2024-03-21T03:55:54.020" Score="0" ViewCount="11" Body="&lt;p&gt;I'm currently experiencing an issue with my mail client where I am unable to download images from my inbox. I suspect this could be due to some incorrect settings or permissions. Does anyone have experience with configuring permissions or troubleshooting similar issues who could provide some guidance?&lt;/p&gt;&#xA;&lt;p&gt;Distributor ID: Elementary&#xA;Description:    elementary OS 7.1 Horus&#xA;Release:    7.1&#xA;Codename:   horus&lt;/p&gt;&#xA;" OwnerUserId="33355" LastEditorUserId="33355" LastEditDate="2024-03-21T04:05:55.587" LastActivityDate="2024-03-21T04:05:55.587" Title="Loading remote images" Tags="|pantheon-mail|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30368" PostTypeId="2" ParentId="30364" CreationDate="2024-03-21T06:17:04.910" Score="0" Body="&lt;p&gt;Just use &lt;code&gt;$flatpak uninstall --unused&lt;/code&gt;. as per &lt;a href=&quot;https://github.com/elementary/appcenter/discussions/2138#discussioncomment-8861311&quot; rel=&quot;nofollow noreferrer&quot;&gt;david's suggestion&lt;/a&gt;&lt;/p&gt;&#xA;" OwnerUserId="22395" LastActivityDate="2024-03-21T06:17:04.910" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30369" PostTypeId="2" ParentId="30364" CreationDate="2024-03-27T06:53:02.990" Score="0" Body="&lt;p&gt;That's the problem with the sandboxed environment. You can have three small apps that you use daily, like an image viewer, PDF viewer, and music app.&#xA;These three apps together can use a few tens of MBs of your drive, but they all may need their environment to run so you could end up with three different Gnome versions, v44, v45, and v46 that use a few GBs of your drive if each app needs a different environment.&lt;/p&gt;&#xA;" OwnerUserId="31345" LastActivityDate="2024-03-27T06:53:02.990" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30370" PostTypeId="1" CreationDate="2024-03-28T01:42:52.190" Score="0" ViewCount="10" Body="&lt;p&gt;There is no way to change this setting and turn off dimming after being inactive. Anyone know how I can turn this off?&lt;/p&gt;&#xA;" OwnerUserId="33366" LastActivityDate="2024-03-28T01:42:52.190" Title="Screen Dims after 30 Seconds of being inactive. No way to change this setting" Tags="|settings|display|power|" AnswerCount="0" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
  <row Id="30371" PostTypeId="2" ParentId="30352" CreationDate="2024-03-31T15:56:16.490" Score="0" Body="&lt;p&gt;Did you ever get any help with this issue?&#xA;I'm in the very same boat as you and can't find any topic that has helped. Did you? Could you pass it along?&lt;/p&gt;&#xA;" OwnerUserId="33374" LastActivityDate="2024-03-31T15:56:16.490" CommentCount="0" ContentLicense="CC BY-SA 4.0" />
</posts>